The speedup is pretty poor. I would be concerned except the SSE2 is
worse:
Existing SSE2 improvement: 22%
New neon improvement: 35%
BUG=webm:1320
Change-Id: Ied598a261134aa6cbe69f96f58589d2bae17bf62
Increase the boost threshold below which GOLDEN update will use same
rate correction factor as INTER_NORMAL.
Improves performance when gf_cbr_boost_pct is set (between 0 and 100)
in CBR mode.
Change-Id: I9f54cc18664786a100b13a416b7137ae03bd0cab
Set short_circuit_low_temp_var to 3 for speed 8 for all res.
No strong visual difference on all clips.
Change-Id: Ia6d9a314291ab1c14d5421bbdd769974083aeb2a
Constraints on encoder config:
-target_bandwidth is no larger than 80% of level bitrate limit
-target_bandwidth * (1 + max_over_shoot_pct) is no larger than
88% of level bitrate limit
-min_gf_interval is no smaller than level limit
-tile_columns is no larger than level limit
Constraints on rate control:
-current frame size plus previous three frames' size is no larger
than the CPB level limit
-current frame size is no larger than 50%/40%/20% of the CPB
level limit if it's a key/alt-ref/other frame.
Change-Id: I84d1a2d6d6e3c82bfd533b3309ce999cfaba2c8b
The source sad could be used to copy the partition without going into
choose_partitioning function to speed up vp9 encoding. Computing source
sad takes little time. Speed test on Android and Linux shows little
encoding time gain (less than 1.4%).
Turned off for now since partition copy is turned off.
Change-Id: I61c9d5b8f22329760cb29a4ee30a7f9c232ce8d3
vp9: Set short circuit to level 3 for VGA for speed 8. Also change the
threshold_32x32 to 5/8*thresholds[1] to improve quality regression
caused to VGA clips.
Change-Id: Ia1590e91e7cb22be78d5b85013387bb1be4272e3
Comment out check on buffer underrun, as it currently fails
on some of the svc tests.
Also cast the update of bits_in_buffer_model_, as this can
go negative now due to the buffer underrun.
This fixes the issue in #1352.
BUG=webm:1350
BUG=webm:1352
Change-Id: Ibd4ef23921daf09e5c15b000aca904aa4573599c
For out-of-range cases, returned UINT_MAX instead of INT_MAX in the
sub-pixel mv search to be consistent with the "uint32_t" return type.
Change-Id: I8e206d771228c13d89bafbbe9f14722c8ecc6a7a
The function 'vp9_find_best_sub_pixel_tree_pruned_more' is modified
to return INT_MAX for handling invalid MV cases from UINT32_MAX.
yunqingwang:
patch 3: rebased on top of the tree.
patch 4: The return type of vp9_find_best_sub_pixel_tree* was changed
to uint32_t to fix ubsan warnings. Changing UINT_MAX back to INT_MAX
was not quite right. Patch 4 modified vp9_temporal_filter.c to accept
uint32_t.
(Note: Inconsistency exists in vp9_find_best_sub_pixel_tree*, which
will be fixed in a separate CL.)
Change-Id: Ib1a79dc2aa41ea6335c21669c76883cdbb7e0535
This reverts commit f0b491a524.
This change results in unsigned integer overflows (as reported by
-fsanitize=integer) in datarate_test.cc,
for many of --gtest_filter=VP9/DatarateOnePassCbrSvc.OnePassCbrSvc*:
unsigned integer overflow: 167198 - 185560 cannot be represented in type
'unsigned long'
As the encoder didn't change, but the input with the change to
(correctly) use Y4mVideoSource, this revert is merely masking the issue.
BUG=webm:1352
Change-Id: Iecd9a6c83b3fca67c566732a5c92d36193cc2060
Comment out check on buffer underrun, as it currently fails
on some of the svc tests.
BUG=webm:1350
Change-Id: I73c88b800cdcc06bd2f900f7b7e2a5fd08248065
When source frame is altref, we only do zero-mv mode, so we can skip
the find_predictors(). No change in compression.
Small speed gain, ~1%.
Only affects 1 pass vbr with lookhead altref, for ytlive with
the macro flag USE_ALTREF_FOR_ONE_PASS on.
Change-Id: I9318c5da8521f017bf54919cd652438b3a6313d1
Remove superfluous test. Produces a small improvement in instruction scheduling.
Measured a 1% to 1.5% reduction in execution time for routine vp9_optimize_b
with different compilers.
No change in behavior.
TEST=Verified that encoded files match bit for bit, with and without this
change.
BUG=b/33678225
Change-Id: I2bf248d4c25fc0256147d7a8766ff9108ae9cba3
Add feature to copy partition from the last frame.
The copy is only done under certain conditions that SAD is below threshold.
Feature is currently disabled, until threshold is tuned.
Feature will be initially used for Speed 8 (ARM).
Under extreme case of always copying partition for speed 8:
Encode time is reduced by 5.4% on rtc_derf and 7.8% on rtc.
Overall PSNR reduced by 2.1 on rtc_derf and 0.968 on rtc.
Change-Id: I1bcab515af3088e4d60675758f72613c2d3dc7a5
Simplify address arithmetic on token_costs to reduce the number of generated
instructions that are used for address arithmetic inside routine
vp9_optimize_b. It also helps improve instruction scheduling depending on
compiler and optimization level.
Measured a 9.3% reduction in retired instructions and 5.3% reduction in
execution time for this routine with GCC v4.8.4 and optimization flags -O3,
and a reduction of up to 11.6% in execution time with other compilers.
No change in behavior.
TEST=Verified that encoded files match bit for bit, with and without this
change.
BUG=b/33678225
Change-Id: I6098650fb5cd2aa04e014fe6e68ca20761f3a21f
relocate the assignment to 'in' outside of the for loop. this quiets a
spurious warning in visual studio builds since:
86e340c enable vpx_idct32x32_1024_add_neon in hbd builds
+ give the variable a more descriptive name
BUG=webm:1294
Change-Id: I5c3da5c7939621477e0fc0ad3a1b2a3045c5bffd
Correctly set interp_filter to SWITCHABLE for INTRA mode.
Also reduce threshold on noise level for re-evaluating zeromv.
Change-Id: Id32c01e193209fb380aa07204f0be3babf29f70a
For when denoising enabled: change condition to enable
the recheck_zeromv_after_denoising for only very high noise level.
This is causing an issue, so enabling it for very high noise
to effectively shut it off.
Change-Id: Ic40d6025f3f398338cedd270d17c0ccd9a3daa84
The new test is causing valgrind failures:
[ RUN ] SSE2/VpxPostProcDownAndAcrossMbRowTest.CheckCvsAssembly/0
==28923== Invalid read of size 16
28923== at 0x724016: ??? (deblock_sse2.asm:146)
Disable during investigation. The test is new but the code is not.
Change-Id: I5521e5fd48a595e3798b833bf7e3cc97b81c1975
To avoid decode performance hit of 2% when running on hyperthreaded
cores.
This patch only uses the mutex's when we are running tsan.
This is safe because 32 bit operations like read and store are atomic
on all the platforms we care about. Tsan warns about race situations,
but in this case either situation ( read occurs before write or write
before read) the worst case is that we go around one extra time in the
loop. So the ordering doesn't really matter.
That said a few other things have been tried :
for instance as per here:
webrtc/base/atomicops.h#52
In this patch they use:
__atomic_load_n(i, __ATOMIC_ACQUIRE);
__atomic_store_n(i, value, __ATOMIC_RELEASE);
This code works on gcc, clang ( replacing protected write and read), and
avoids tsan errors. Incurring no penalty in performance. In C11 its
replaced by straight atomic operands.
However there is no equivalent in the visual studio's we support as
int32 on all windows platforms is already atomic. To avoid tsan like
warnings on windows we'd need to use interlocked exchange and the
end result doesn't gain us any thing.
Change-Id: I2066e3c7f42641ebb23d53feb1f16f23f85bcf59
Implement vpx_post_proc_down_and_across_mb_row in NEON.
Runs about 6-7x faster than C.
BUG=webm:1320
Change-Id: Ic5c7d3552a88cfcf999ec5bf2bd46fee460642c2
The flag USE_ALTREF_FOR_ONE_PASS allows for alt-ref lookahead
in 1 pass vbr (from https://chromium-review.googlesource.com/#/c/365498).
This change is to make sure this macro flag only has effect if
the config flag cpi->oxcf.enable_auto_altef is also on.
No change in ytlive encoding, as USE_ALTREF_FOR_ONE_PASS is not
yet enabled.
Change-Id: I1a69681e4a15c5244581a3dab4587fca08f02e0f
Reapply this patch:
ff0107f Amend and improve VP8 multithreading implementation
Amended the patch to add a unit test, and fix an asan error.
BUG=webm:851
Change-Id: I6572c03256169c64e80248bf5a5e99f59a2fc93c
use_base_mv assumes 2x2 scaling, so fix is to shutoff
this feature unless spatial scale factors are 2.
Added svc unittest for 2 spatial layers with 5x5 scaling,
which generates the issue without this fix.
Also fix some settings in svc unittest:
let the speed setting vary (from 5 to 8), and enable static threshold.
BUG=webm:1344
Change-Id: Idfd0a6c633c21b49a0479601506302cfe974e30e
Set #threads to default 1 for all streams, change bit allocaton
for 3 temporal layers, and enable denoiser on middle resolution layer.
Change-Id: I4a57adbfdb2c319002b8f3cf359613842dc00d75
after:
2d3d95f enable vpx_idct16x16_256_add_neon in hbd builds
reorder INCLUDEs and fix indent of IF/ENDIFs
remove vpx_config.asm to avoid multiple symbol definitions in windows
builds and shift idct_neon.asm.S to the top to allow use of
CONFIG_VP9_HIGHBITDEPTH in the export list.
Change-Id: I0dacfbae62a6ec8fe4a26940c1a52da2dfad2029
One of the first pass stats "new_mv_count" is no longer used in VP9,
and is removed. This also makes it easy to implement a multi-threaded
first pass. This change doesn't affect the coding performance, which
has been verified by borg tests.
Change-Id: I4c7c7bf9465fda838eb230814ef0c631c068c903
1. Use correct projections when copying real dct/quant outputs.
2. Remove local random number generator and combine loops.
3. Quantization with minimum allowed step sizes instead of maximum.
This may generate larger inputs.
Change-Id: I154afc26230c894d564671cff4b8fd5485b69598
vpx_idct16x16_256_add_neon_pass1, vpx_idct16x16_10_add_neon:
this was a constant 8 in all cases meaning the results are stored
contiguously, this allows the number of stores to be reduced.
Change-Id: I7858a0a15a284883ef45c13dfd97c308df9ea09e
Use the segment weight factor based on the target (cr->percent_refresh)
if it less than the current estimate (avergae of past usage and target).
Small improvement at low bitrates.
Change-Id: Iba8fd909e203f94458901366d3a991f7ea854d49
the expansion of findstring and rtcd_dep_template_CONFIG_ASM_ABIS needs
to be deferred until the block is parsed as makefile syntax rather than
eval time where rtcd_dep_template_CONFIG_ASM_ABIS will be unset. this
ensures vpx_config.asm is properly created.
Change-Id: I7c38c6c082da78397936467482789dd468adc316
* changes:
Update vpx_idct4x4_16_add_neon() to pass SingleExtremeCoeff test
Refine 8-bit 4x4 idct NEON intrinsics
Add idct speed test.
Update partial_idct_test.cc to support high bitdepth
force this to be created before any other .S files. this change
additionally removes the file from the source list as it doesn't need to
be compiled on its own.
Change-Id: I6b4cd56ef6059d08f75f06fb749cddf76e0e165e
Increase the motion threshold and qp-delta for segment#2 boost.
This can increase the frame-drop at low bitrates, but generally
better spatial quality.
Only affects real-time mode with aq-mode=3, at very low bitrates.
Change-Id: I5ccb784667f70d0c27d369806b93b1f93d5605d1
For some filter level, the C/MSA doesn't match SSE2. Part of unit tests
are disabled. They will be re-enabled when C/MSA funcs are fixed.
BUG=webm:1321
Change-Id: Ib16b98b5eecb15d2252aa4ea267b782ee2b27533
replace downloads.webmproject.org with the canonical
storage.googleapis.com/... form. this appears less likely to fail when
dealing with multiple concurrent connections.
Change-Id: I0dcbd04df9e4057fa851f458b3ef7e3589f1f2f1
best_sub8x8[1] won't be used meaningfully when is_compound is false, but
may trigger an msan warning as the value is copied around and later
clamped.
BUG=667044
Change-Id: Icc24c3b72cdb550bebea44d4aaa4ff8bf3fbab56
Use the same feature as https://chromium-review.googlesource.com/#/c/411327/,
but allow it to be used for speed = 6 and 7, where
short_circuit_low_temp_var = 1.
Speed up of ~2-3% for speed 7, with little/no loss in compression.
Change-Id: I263a0f261ad9929034392d68f0153dc6376fdb5f
Remove unnecessary "virtual" before some functions. Change *_btm_* in
variable names to *_bottom_*.
Change-Id: Ifd4ce667537617f451cdfed47dd8c48817fd983b
VpxEncoderThreadTest was taking a very long time for some runs and
timing out a lot. This is an attempt to split the test into runs
that can be run nightly ( speeds 2 through 9) and runs that can
be run weekly ( speeds 0-1 ).
Change-Id: Iee6f61a561006d3a30381dd3b52b9a4dce07a70c
This is a boolean value that is written into bitstream, any value other
than 0 or 1 could have led to unexpected behavior. This commit fix the
issue by adding validation of the value to make sure it is boolean.
BUG=webm:1339
Change-Id: I2d3e69e8dbefcab9a0db9cb39a91a40ce531c5a1
fixes reloc errors like:
R_X86_64_PC32
vpx_dsp/x86/deblock_sse2.o:
requires dynamic R_X86_64_PC32 reloc against 'vpx_rv' which may overflow
at runtime
Change-Id: I218fc0e7c8258197f890d395f335e5a4fe82dccb
tests with 'Large' in the name are reserved for slow running tests which
may not be run on all platforms
Change-Id: I2a7d6dd46b29b50469893e46433844132fb727c2
This runs multiple encodes and decodes of vp8 and vp9 in parallel,
with so many threads that problems with synchronization can show up.
Change-Id: I2b297e7f43d1e741323c7ad9f50a3931ae609f16
Add a new, more aggresive short circuit: short_circuit_low_temp_var = 3 to skip
golden of any mode when variance is lower than threshold for low res.
This change only affects speed = 8, low resolution.
Metrics for avgPSNR/SSIM on rtc_derf (low resolution) show loss of
0.27/0.31%.
On Nexus 6, the encoding time is reduced by ~2.3% on average across all
low-res clips.
Visually little change on rtc_derf clips.
Change-Id: Ia8f7366fc2d49181a96733a380b4dbd7390246ec
this removes the need for __STDC_LIMIT_MACROS which is defined in
vpx_integer.h, but may be preceded by earlier includes of stdint.h;
fixes build with the r13 ndk
Change-Id: I3950c8837cf90d5584a20ce370ae370581c2182c
avoids the definition of min/max macros in headers that may appear in
c++ unit tests. the codebase uses VPXMIN/MAX for this purpose in any
case
Change-Id: I2b679b045d64fb34fd8780f704e3caf10a758d82
use 'android/cpufeatures' rather than 'cpufeatures'; this matches the
documentation, fixes compilation with r12b/r13 and still works with
older ndks.
Change-Id: I2f34233c164e6d4d46428f8905d5502cea4288a2
Changes only affects speed = 8 for low resolutions.
Metrics for avgPSNR/SSIM on rtc_derf (low resolutions) show loss of
0.5/0.6%.
On Nexus 6, the encoding time is reduced by ~5.9% on average across all
low-res clips.
Visually little/no change on rtc_derf clips.
Change-Id: I68dd50e558d72dcc1af8317d224bfae5e3bd872d
This commit enables asymptotic closed-loop encoding decision for
the key frame and alternate reference frame. It follows the regular
rate control scheme, but leaves out additional iteration on the
updated frame level probability model. It is enabled for speed 0.
The compression performance is improved:
lowres 0.2%
midres 0.35%
hdres 0.4%
Change-Id: I905ffa057c9a1ef2e90ef87c9723a6cf7dbe67cb
this was enabled in:
3ae2597 idct,NEON: add a tran_low_t->s16 load adapter
+ enable it for all NEON configs, both intrisincs and assembly versions
exist
BUG=webm:1294
Change-Id: I339088b2a398200f95658d040034fb9b2a7c8ce0
usage of the vp8 versions was removed in:
3f72509 vp8: remove VP8_SET_DBG* control support
vp9 had the usage stripped even earlier.
Change-Id: I978142eb6492552cd29c9c6feb1e89acfc5f7b84
this was enabled in:
3ae2597 idct,NEON: add a tran_low_t->s16 load adapter
+ enable it for all NEON configs, both intrisincs and assembly versions
exist
BUG=webm:1294
Change-Id: Iaade219e9d1de7b69423670d3ea6271b0965e068
idct4x4 and idct8x8 were universally enabled for high-bitdepth builds
in:
3ae2597 idct,NEON: add a tran_low_t->s16 load adapter
BUG=webm:1294
Change-Id: If142afb169c48728cc4b222e7c41aa4a63f95f0f
replace load_and_transpose_s16_8x8() in idct32_6_neon() with a separate
load_tran_low_to_s16() and transpose_s16_8x8(). the combined function is
used in idct32_8_neon() where the input is the correctly sized output
from the earlier stage.
BUG=webm:1294
Change-Id: I4257c4b3a421b2cf5d13651f966eee0680ef98a9
For noisy content, be more aggressive in skippping some blocks for
delta-qp to reduce noise pulsing artifact. Also treat frame boundary
case when dimension is not multiple of superblock size/64.
Only affects non-screen content case, and when source noise
is measured to be high (at least level kMedium).
Change-Id: Ib13a2a20ed1ce37ff3c44d95c3ef2635fd695222
This uses the same sdx4df pointers as vp8_diamond_search_sadx4 and
should therefore target the same optimizations.
See e4ddf9db6a
Change-Id: Ic298e9b25c34bbe6b7a0799509355b0addb56675
The matching on ads2gas_apple.pl is too liberal and catches
CONFIG_EXTERNAL_BUILD and CONFIG_INTERNAL_STATS because they have RN in
the names.
The RN renaming feature is not used in any existing assembly files. It
was used in some armv6 files but they were removed.
Change-Id: Ib65abf1947d3e89f0d1584e2a5de399d24008f95
Two functions do not pass this test:
vpx_idct8x8_64_add_ssse3
vpx_idct8x8_12_add_ssse3
The test has been modified to avoid triggering an issue with those
functions but they still must be investigated.
BUG=webm:1332
Change-Id: I52569a81e8e6e0b33c4a4d060d0b69c3fc4f578e
Add condition that usable_ref_frame > LAST.
This is to avoid potentially skipping all last-nonzero mv modes,
if golden is used as a reference but skipped completely for the
current block.
This has no effect currenty, as we always consider testing golden
mode for each block.
Change-Id: I3182cf44664081935a90ed43aa7b32e710e60e22
Fixed formatting bug introduced by the fix to BUG=webm:1322
( Iedc4477aef1746aa0a4f84d88a1156296fd3ba87)
Change-Id: I715ee446c0e8584967ab87ba4e355759dd394187
vp9_init_macroblockd() resets the error_info to cm's global copy; this
needs to be set to the thread-level target to avoid jumping to the
incorrect stack, resulting in hang or crash.
broken since:
1f4a6c8 vp9/tile_worker_hook: add multiple tile decoding
includes v1.5.0, v1.6.0
BUG=629481
Change-Id: Icbf1696b25ba8c479e845fbf227b3c3ca73542f5
vpx_config.asm and idct_neon.asm.S are required since:
3ae2597 idct,NEON: add a tran_low_t->s16 load adapter
Change-Id: If5959a25edb370dd7dcdca71c96e9a5aad0840ce
enable idct4x4* and idct8x8* which are compatible for 8-bit decodes in
high-bitdepth mode. the adapter narrows 32-bit input to 16, whether the
expansion can be avoided at all in this case remains a TODO. roughly
matches sse2.
BUG=webm:1294
Change-Id: I3ea94e5a2070dfd509b5de0c555aab4e1f4da036
A past patch made it so that every frame that had a decode error
caused a corrupted frame to be counted. Unfortunately it was possible
to get both a decode error and a corrupt frame for the same frame
and thus double count an error. This code makes that impossible.
Change-Id: Iea973727422a3bf093ffda72fa358a285736048b
Permits skipping 0, 1/2 or 3/4 of the frames, corresponding to
temporal layers 2, 1 and 0 of a 3-temporal-layer encoding. 1/2
corresponds to TL0 in a 2-layer encoding.
Change-Id: I7f6d131f63707e5262fc67d111bfb3a751ede90d
Allow for passing in the layer bitrates at command line.
Fix to allow passing in bitrate for each spatial-temporal layer.
Change to some default values for 1 pass cbr mode:
spatial scale and qp-max/min.
Small fixes to some build warnings.
Change-Id: I3f9a776262712480a6570bb863a835b2fc49935a
This change is a step in a larger change to the way boost and interval are
determined for ARF and Key frames.
This patch contains some pluming for the general case but focuses on the
key frame boost calculation. This now relies more heavily on the rate at
which the error score increases between the primary and secondary reference
frame. This seems to be less fragile when dealing with different frame sizes.
For example larger image formats tend in the first pass to see a higher
% of intra coded blocks and the use of this number in calculating the frame
decay factor was leading to much lower boost numbers for 4K, for example,
than the same clip coded at 2K.
This change does give overall gains but they are MUCH larger for the 4K Netflix
set. For the 4K Netflix set the average gain is around 3% with some clips > 20%
whereas for the same set at 2K the average gain is 0.5-1%.
In general for small image formats the boost is most often reduced a little whereas
4K clips the boost is increased. There are some -ve cases such as Akiyo at 352x288
where the reduced boost hurts the metrics, especially for SSIM, even while
the set as a whole improves. This is most notable at very low Q and may be the
subject of a future patch.
Some common code for KF and ARF was separated in this patch for the purposes of
tuning but may later be re-merged if appropriate.
Change-Id: Iaa15ac5a58d2be89181100d95cef6a8dc4b12d0d
Fixes a case where recode is not triggered based on the value
of maxq passed into the recode loop test function.
BUG=b/32375284
Change-Id: I15ad985d0525c68e0443cfaf842440d2754b2266
The result of the transform is added to the destination buffers. In the
existing tests the destination buffer is always empty so that portion of
the code was never exercised.
Change-Id: I1858c4fed2274f1b9faf834d2ba4186a4510492a
Switch to using correctly sized inputs and outputs. This simplifies
adding tests with varying strides.
Change-Id: I716a0d8173dcf6a86d56656ac9d3101b7ec27642
Removed a couple of adjustments that no longer move the needle
much but complicate the process of tuning.
Change-Id: Ie320f5cf155e6aac14a4757ea9ada2cd59f27590
Modified the encoder multi-thread test so that it included cpu-used=0 and
frame-parallel=0.
frame_parallel_decoding_mode is 1 by default, which disables probability
updating and gives lower encoding quality. Current VP9 multi-threading
encoder and decoder support probability updating. To test this part, we
should turn on it in the unit test, namely, setting frame-parallel to 0.
Change-Id: Ia1f86e01f0de628f50d819ae31509de3e1b6c755
This patch modified the motion search counts used in:
https://chromium-review.googlesource.com/#/c/305640/
These 2 counts were originally added as thread data, and used to
make decisions in motion search. The tile encoding order can be
inconsistent while using different number of threads, which can
cause bitstream mismatch. Here moved them to tile data to solve
the issue.
BUG=webm:1322
Change-Id: Iedc4477aef1746aa0a4f84d88a1156296fd3ba87
dst += stride behaving better with gcc/clang
Expanding inline function dc_SIZExSIZE() save intructions for
vpx_dc_predictor_SIZExSIZE_neon().
Change-Id: Id0ccbd58b6a31df539141fd33bdf28633339150d
A failure to decode is most likely equivalent to a corrupt
frame for the purpose of returning a failure.
Change-Id: Ie53db2b8130b40b725841f5f7a299d63aa56913d
Re-use the tile worker threads to pack the bitstream in parallel
on a per-tile basis. Restricting this to real-time only for now
(further testing is needed to ensure this does not make 2-pass
worse in any case).
BUG=webm:1309
Change-Id: I8a80da7c5089b837d0df79a5c49d5e3022dfc8ec
In variance partition low resolutions may use varianace based on
4x4 average for better partitioning.
Increase the threshold for doing this at speed = 8.
Improves speed by ~5%, with little loss, < 1%, on RTC_derf set.
Change-Id: Ib5ec420832ccff887a06cb5e1d2c73199b093941
the intrinsics are neutral to ~20% faster on cros/android
devices when using gcc-4.9/clang-3.8.1 and gcc-4.9/clang-3.8.x from the
r13 ndk. neutral results typically came with gcc-4.9 while larger
positive gains were achieved with clang 3.8.x.
BUG=webm:1303
Change-Id: I4d31f9c017944681b881493525d4573a7a5b1e16
Control already exists for vp9, adding it to vp8.
Usage is only when error_resilient is off.
Added a datarate unittest for non-zero boost.
Change-Id: I4296055ebe2f4f048e8210f344531f6486ac9e35
This reverts commit 9e8efa5b18.
this change causes ubsan warnings, failures in
vpxenc_vp9_webm_rt_multithread_tiled
BUG=webm:1309
Change-Id: I020c7be985c771bfff4b3de1afe51cc8edb980da
git log --no-merges 32d5ac4..9732ae9
9732ae9 EbmlElementSize: quiet uint64->int32 conv warning
da04eba SetProjectionPrivate: quiet uint64->size_t conv warning
6db32d5 mkvparser,Projection::Parse: fix int->bool conv
3bb0dfa cosmetics: fix a couple lint warnings
0e179d6 update .clang-format
fc5f88d Fix temp files being left on system.
c04a134 Add support for overriding PixelWidth and PixelHeight.
c0160e0 Add support to explicitly set segment duration.
02bc809 Add support to estimate file duration.
c97e3e7 Add support to output sub-sample encryption information.
26f4344 MakeUID: quiet unused param warning in Android builds
d6af52a Change check to fix compile error.
1720020 webm_parser: Add Mesh value for ProjectionType
78f2c5a webm_parser: Use ./ prefix for includes
da62f65 webm_parser: Remove webm/ prefix from public includes
e15e8f2 webm_parser: Update README build instructions
5023f2b mkvmuxer: Fix Colour::Valid()
cf16204 mkvmuxer_tests: Actually test cue points in the cue point test.
93e9fb3 Validate Colour element values.
8036925 mkvparser_tests: Add Projection element test.
f52d38c mkvparser_tests: Add Colour element test.
826436a mkvparser: minor SeekHead::Entry clean up.
24fb44a mkvmuxer_tests: Add Projection element test.
1e0a8ea mkvmuxer_tests: Add Colour element test.
0278616 mkvmuxer: Colour accessors/mutators.
2346f8f Add mkvparser wrapper functions.
54d6b6b webm_info: Add Projection element support.
65fee06 mkvmuxer_sample: Add support for Projection element.
9a3f2b5 mkvparser_sample: Add support for Projection element.
41e814a mkvparser: Add Projection element support.
483a0ff mkvmuxer: Add Projection element support.
676a713 Add support for the Projection element
725f362 mkvmuxer: Fix memory leak when Colour is set multiple times.
fa182de mkvparser_sample: Add output of audio track codec private size.
8f521f2 mkvparser_tests: Add invalid BlockGroup test.
39137d7 Remove docs saying binary elements default to 0
80685d3 Do not skip over unknown elements at the root level
c147504 Fix legacy Makefile.
58711e8 mkvparser_sample: Fix version info string.
837746f mkvparser_tests: Add invalid block test.
207cd80 Disambiguate sample sources and targets.
a112d71 mkvparser_tests: Refactor invalid file loading code.
5dea33e Disambiguate test source and target names.
125049e parser_tests: Add another truncated chapter string test.
1de8d4c parser_tests: Add truncated chapter string test.
ff8c2b6 parser_tests: Move cue validation to test_util.
4b0690f parser_tests: Add invalid lacing test.
9828e39 mkvmuxer: Set default doc type version to 4.
5495a59 webm_parser: Reference more files in CMakeLists.txt.
0c0ecd0 vpxpes_parser: Add start code emulation prevention support.
639a4bc webm2pes: Remove debug printfs().
9a51102 webm2pes: fflush() in the correct conversion function.
dc7f155 webm2pes: Track total bytes written.
d518128 webm_parser: Enable usage of werror.
e1fe762 webm2pes: Add test for mux/demux of large input.
1b24a79 vpxpes_parser: Read and store PTS when present.
6cf0a0f vpxpes_parser: Store frame payloads.
25d2602 webm_parser: Convert style to match the rest of libwebm
24be76d webm2pes: Replace VpxFrame with VideoFrame.
b451c3b Add a basic video frame storage class.
05c90eb libwebm_util: Clarify error text in superframe parser.
e6415af webm2pes: Make WritePesPacket() a public method.
8f840dd webm2pes: Move frame read out of PES packet write method.
448af97 webm2pes: Restore frame fragmentation support.
f8bb714 cmake: Integrate new parsing API and tests.
cb8ce0b Add a new incremental parsing API
900d322 vpxpes_parser/webm2pes: BCMV and PTS fixes.
4b73545 webm2pes: Add start code emulation prevention.
82903f3 Add column tiles and frame parallel to webm_info
5d91edf style_clean_up: Remove unnecessary parentheses
a95aa4b vp9_level_stats: correct total_uncompressed_bits_ calculation
f46566f mkvreader: Fix shorten-64-to-32 warning in 32 bit builds.
76630ca mkvwriter: Fix shorten-64-to-32 warning in 32 bit builds.
a8ffbd4 webm2pes: Fix format specifier warnings.
faf89d4 Add MaxLumaSampleRate grace percent to stats.
d31e6c9 Fix profile 2 in vp9_header_parser.
bd3ab3a Add flag to estimate last frame's duration to stats.
c182ed9 Fix lint issue in hdr_util.h
cc62ecd Add test for Cluster memory leak
196708a Change MaxLumaSampleRate to be based on frame resolution.
cbd676b mkvmuxer: Fix leak when a Cluster isn't finalized
9a235e0 mkvmuxer: Set doctype to matroska when muxing non-WebM codecs.
47f2843 Add parsing support for new features in CodecPrivate.
e3c9576 Add VP9 level output to webm_info.
5cf549f cmake: Log compiler flag at check time.
bbaaf2d Add class to gather VP9 level stats.
8bb68c2 Add file to parse data from VP9 frames.
296429a Add support to parse VP9 profile.
df3412f Add support for setting VP9 profile and level to sample_muxer.
87832d4 mkvmuxer: Fix Segment::Finalize in kLive mode
6df3e56 mkvmuxerutil.hpp: Add using directives for overloaded size utils.
ec47928 mkvmuxerutil: Revert to using mkvmuxertypes.
a1dc4f2 Fix parsing of VP9 level.
4e3d037 Add support to output Colour elements to webm_info.
d3656fd muxer_tests: ignore iwyu re gtest-message.h
e76dd5e Fix file name in mkvmuxertypes shim.
1be5889 Add temporary include shims at old file locations.
039df94 Add TEST_TMPDIR environment variable
Change-Id: I84bc1401b0aad71ad6727b687f1bede9953a7a08
While we are at it:
- Rename some variables to more meaningful names
- Reuse some common consts from a header instead of redefining them.
Change-Id: I75c4248cb75aa54c52111686f139b096dc119328
(cherry picked from aomedia 09eea21)
Add stronger condition for splitting 64x64, for low noise content.
This reduces dragging artifact near moving head.
Little/no change in metrics on RTC set.
Change-Id: I39b38cfd20f2ece53ff49c2aaf76ba9f82761be1
fc5f88d Fix temp files being left on system.
c04a134 Add support for overriding PixelWidth and PixelHeight.
c0160e0 Add support to explicitly set segment duration.
02bc809 Add support to estimate file duration.
c97e3e7 Add support to output sub-sample encryption information.
26f4344 MakeUID: quiet unused param warning in Android builds
d6af52a Change check to fix compile error.
1720020 webm_parser: Add Mesh value for ProjectionType
78f2c5a webm_parser: Use ./ prefix for includes
da62f65 webm_parser: Remove webm/ prefix from public includes
e15e8f2 webm_parser: Update README build instructions
5023f2b mkvmuxer: Fix Colour::Valid()
cf16204 mkvmuxer_tests: Actually test cue points in the cue point test.
93e9fb3 Validate Colour element values.
8036925 mkvparser_tests: Add Projection element test.
f52d38c mkvparser_tests: Add Colour element test.
826436a mkvparser: minor SeekHead::Entry clean up.
24fb44a mkvmuxer_tests: Add Projection element test.
1e0a8ea mkvmuxer_tests: Add Colour element test.
0278616 mkvmuxer: Colour accessors/mutators.
2346f8f Add mkvparser wrapper functions.
54d6b6b webm_info: Add Projection element support.
65fee06 mkvmuxer_sample: Add support for Projection element.
9a3f2b5 mkvparser_sample: Add support for Projection element.
41e814a mkvparser: Add Projection element support.
483a0ff mkvmuxer: Add Projection element support.
676a713 Add support for the Projection element
725f362 mkvmuxer: Fix memory leak when Colour is set multiple times.
fa182de mkvparser_sample: Add output of audio track codec private size.
8f521f2 mkvparser_tests: Add invalid BlockGroup test.
39137d7 Remove docs saying binary elements default to 0
c147504 Fix legacy Makefile.
80685d3 Do not skip over unknown elements at the root level
58711e8 mkvparser_sample: Fix version info string.
837746f mkvparser_tests: Add invalid block test.
207cd80 Disambiguate sample sources and targets.
a112d71 mkvparser_tests: Refactor invalid file loading code.
5dea33e Disambiguate test source and target names.
125049e parser_tests: Add another truncated chapter string test.
1de8d4c parser_tests: Add truncated chapter string test.
ff8c2b6 parser_tests: Move cue validation to test_util.
4b0690f parser_tests: Add invalid lacing test.
9828e39 mkvmuxer: Set default doc type version to 4.
5495a59 webm_parser: Reference more files in CMakeLists.txt.
0c0ecd0 vpxpes_parser: Add start code emulation prevention support.
639a4bc webm2pes: Remove debug printfs().
9a51102 webm2pes: fflush() in the correct conversion function.
dc7f155 webm2pes: Track total bytes written.
d518128 webm_parser: Enable usage of werror.
e1fe762 webm2pes: Add test for mux/demux of large input.
1b24a79 vpxpes_parser: Read and store PTS when present.
6cf0a0f vpxpes_parser: Store frame payloads.
25d2602 webm_parser: Convert style to match the rest of libwebm
24be76d webm2pes: Replace VpxFrame with VideoFrame.
b451c3b Add a basic video frame storage class.
05c90eb libwebm_util: Clarify error text in superframe parser.
e6415af webm2pes: Make WritePesPacket() a public method.
8f840dd webm2pes: Move frame read out of PES packet write method.
448af97 webm2pes: Restore frame fragmentation support.
f8bb714 cmake: Integrate new parsing API and tests.
cb8ce0b Add a new incremental parsing API
900d322 vpxpes_parser/webm2pes: BCMV and PTS fixes.
4b73545 webm2pes: Add start code emulation prevention.
82903f3 Add column tiles and frame parallel to webm_info
5d91edf style_clean_up: Remove unnecessary parentheses
a95aa4b vp9_level_stats: correct total_uncompressed_bits_ calculation
f46566f mkvreader: Fix shorten-64-to-32 warning in 32 bit builds.
76630ca mkvwriter: Fix shorten-64-to-32 warning in 32 bit builds.
a8ffbd4 webm2pes: Fix format specifier warnings.
faf89d4 Add MaxLumaSampleRate grace percent to stats.
d31e6c9 Fix profile 2 in vp9_header_parser.
bd3ab3a Add flag to estimate last frame's duration to stats.
c182ed9 Fix lint issue in hdr_util.h
cc62ecd Add test for Cluster memory leak
196708a Change MaxLumaSampleRate to be based on frame resolution.
cbd676b mkvmuxer: Fix leak when a Cluster isn't finalized
47f2843 Add parsing support for new features in CodecPrivate.
9a235e0 mkvmuxer: Set doctype to matroska when muxing non-WebM codecs.
e3c9576 Add VP9 level output to webm_info.
bbaaf2d Add class to gather VP9 level stats.
5cf549f cmake: Log compiler flag at check time.
8bb68c2 Add file to parse data from VP9 frames.
df3412f Add support for setting VP9 profile and level to sample_muxer.
296429a Add support to parse VP9 profile.
87832d4 mkvmuxer: Fix Segment::Finalize in kLive mode
6df3e56 mkvmuxerutil.hpp: Add using directives for overloaded size utils.
ec47928 mkvmuxerutil: Revert to using mkvmuxertypes.
4e3d037 Add support to output Colour elements to webm_info.
a1dc4f2 Fix parsing of VP9 level.
039df94 Add TEST_TMPDIR environment variable
d3656fd muxer_tests: ignore iwyu re gtest-message.h
e76dd5e Fix file name in mkvmuxertypes shim.
1be5889 Add temporary include shims at old file locations.
Change-Id: I6a1026814560be80d604a5ecb9b66406a1186dd9
Re-use the tile worker threads to pack the bitstream in parallel
on a per-tile basis. Restricting this to real-time only for now
(further testing is needed to ensure this does not make 2-pass
worse in any case).
BUG=webm:1309
Change-Id: Ia2c982da56697756e12f02643f589189b3271d98
Fix unit_tests_ubsan failure for VP8/DatarateTestLarge.DenoiserOffOn.
Failure was triggered by commit: df66f8e8.
Change-Id: I7cc5bd309e85950cfc5755e01d0eb942d9ca6984
For 1 pass vbr real-time mode:
Allow for the usage of alt-ref frame when non-zero lag-in-frames is used.
Use non-filtered alt-ref, and select usage based on fast scene/content
analysis/detection within the lag of frames.
Positive gains on ytlive set: overall avgPSNR ~3-4%.
Several clips are up between 5-14%, a few clips are neutral/small change.
Current speed decrease is about ~5-10%.
Use the flag USE_ALTREF_FOR_ONE_PASS to enable this feature
(off by default for now).
Change-Id: I802d2bf3d44f9cf01f6d15c76be9c90192314769
Put limit on gf interval based on lag, and allow
for the adjustment on next gf group also on key frame.
Small/neutral change on ytlive metrics.
Change only affects 1 pass vbr real-time mode.
Change-Id: I339c8f4398848698b6e10fe9482c52ca661b94a5
Updated code to process in 8bit as saturation/clipping takes care of
overflow
Removed unused macro
Change-Id: I113df60286fb28b216df800d95b2d3695ef71440
In 1 pass CBR, with error_resilience off, allow for
special logic to change the default gf behaviour.
In this CL: boost is turned off and the gf period
is set to a multiple of cyclic refresh period.
Change only affect 1 pass CBR mode, i.e, when the flag
gf_update_onepass_cbr is set.
Including the previous change (3ec8e11: to allow cyclic refresh
for error_resilience off), comparing metrics on RTC set for
error_resilience off vs on: avgPSNR/SSIM up by ~6%.
Change-Id: Id5b3fb62a4f04de5a805bd1b418f2b349574e0bc
Due to change in command line to sample encoder from:
7eff8f3 Update to vpx_temporal_svc_encoder command line.
This caused the tests in vpx_temporal_svc_encoder.sh to fail.
Change-Id: Ic667da81955ad117d04610af21877fed1d4f188f
these are compatible as they only load one element of the input so the
larger size of tran_low_t makes no difference in little endian builds.
note the asm is incompatible with big-endian, but there are other points of
failure there so currently it's considered unsupported.
BUG=webm:1294
Change-Id: Icd2665a0699bccae92d1bea43a95b0a83fb17028
It only handles the realloc constraint (preserving low elements) by
serendipity, and we don't actually rely on that behavior anyway.
Meanwhile the calls may do extra copying that gets immediately clobbered
by the callers.
Change-Id: I8dfa89e4a81084b084889c27bd272fdf85184e8d
vp8_short_inv_walsh4x4_msa - Optimized to process in short vector type
Updated below functions to store exact number of bytes in output rather than complete vector
idct4x4_addblk_msa
idct4x4_addconst_msa
dequant_idct4x4_addblk_msa
dequant_idct4x4_addblk_2x_msa
dequant_idct_addconst_2x_msa
Change-Id: Ic1b3752e2421dc7d70a082dcdaab9d140d7e5d9c
cyclic_refresh was tied to error_resilience mode.
Allow it to be on also for 1 pass CBR mode even if
error_resilience is off.
Other option to use new control for this, but prefer to avoid
that for now.
Change-Id: I3625b292ee059a890e31338b514e211bf0ab5c3e
This change will make the highbd txfm input range check more comprehensive
The 25-bit highbd input range is composed by
12 signal input bits + 7 bits for 2D forward transform amplification + 5 bits for
1D inverse transform amplification + 1 bit for contingency in rounding and quantizing
BUG=https://bugs.chromium.org/p/webm/issues/detail?id=1286
BUG=https://bugs.chromium.org/p/chromium/issues/detail?id=651625
Change-Id: I04c0796edd7653f8d463fba5dc418132986131e7
These caused the following warning with GCC 5:
warning: logical not is only applied to the left hand side of
comparison [-Wlogical-not-parentheses]
assert(!is_compound == (cm->reference_mode == SINGLE_REFERENCE));
Change-Id: If296aabb2311ceb7d903b395c1549ef81c2cbf9b
(cherry picked from commit c6cf7a6111)
these functions are incompatible currently and unreferenced in rtcd,
exclude them from the build.
BUG=webm:1294
Change-Id: I7790c195a91e1b142f56c04d2a5e305d9133b896
Rename vpx_lpf_horizontal_edge_8() to vpx_lpf_horizontal_16().
Rename vpx_lpf_horizontal_edge_16() to vpx_lpf_horizontal_16_dual().
Change-Id: I798ca8fbbd657d06d3db2bfb0fb3321168f49e52
This patch sets the 16x16 src_diff to zero and ensures correct calculation
of this_error for block sizes smaller than 16x16.
Change-Id: I7b7c02d267433c9f22c8ac9b8d5df2f499175172
change_config() may be called often in real-time application,
to update bitrate/framerate or qp-max/min.
No need to do update_frame_size() unless frame size has changed.
Change-Id: I23a51deade1e03adc91c468f9ffde3235298770c
For real-time mode at speed 8: turn off MINIMAL_LF at speed 8,
for non-screen content mode.
Visually better, avgPSNR/SSIM on rtc set go up by ~4-5%.
Speed decrease of about ~3%.
Change-Id: I8eb69330f02e0ceece1507d43cfc8a049a1d8291
to get_binary_prob(). the only other caller mode_mv_merge_probs() does
its own test on 0.
BUG=chromium:639712
Change-Id: I1178688706baeca2883f7aadbc254abb219a44ce
+ inline the function directly as there was only one consumer
(get_prob())
this is an attempt to reduce the amount of branches to workaround an amd
bug. this change is mildly faster or neutral across x86-64, arm.
http://support.amd.com/TechDocs/44739_12h_Rev_Gd.pdf
665 Integer Divide Instruction May Cause Unpredictable Behavior
BUG=chromium:639712
Suggested-by: Pascal Massimino <pascal.massimino@gmail.com>
Change-Id: Ia91823aded79aab469dd68095d44300e8df04ed2
Inline function called from test/dct16x16_test.cc wouldn't build due to:
invalid operands of types ‘__gnu_cxx::__enable_if<true, double>::__type
{aka double}’ and ‘int’ to binary ‘operator>>’
return (abs(ref->row) >> 3) < COMPANDED_MVREF_THRESH &&
this converts the test to abs() < COMPANDED_MVREF_THRESH << 3 which
hides the promotion issue.
Regression from commit de993a847f
BUG=webm:1291
Change-Id: I73b5943d07d5b61b709d299114216a2371a8fd62
provides msvc-like warnings for implicit conversions from 64-bit to
32-bit types
--enable-vp9-highbitdepth still requires some work
this also skips CXXFLAGS for now as some work would be needed to cleanup
third_party/*.cc or split it from test/*.cc where it comes to flags.
Change-Id: Ic9a095b73286eba5ed39bfc27ff69593748cbbf4
The original commit never set any 'specialize' line:
61311e6103
It appears the sadx4 version of function uses sdx4df calls to speed up
the search. There are no sse3 versions of the sdx4df functions, but
there are sse2 and msa versions.
There is a neon version of vpx_sad16x16x4d but not any of the smaller
versions. Perhaps if they existed this function could be expanded to use
them.
Change-Id: I936d7d6b1a3ff6dcd5a4d2322272708c47cdec13
* changes:
Expand -Wextra to more of the library
mips: clean up wextra warnings
Add compiler flag -Wsign-compare
Add compiler warning flag -Wextra and fix related warnings.
Remove unused zbin variable:
warning: unused parameter ‘zbin’
Use int for loop variables to avoid unsigned conversion:
warning: comparison between signed and unsigned integer expressions
Change-Id: Icea74b870c0ee68a8bf687e796a69392af25a8ad
Also, fix the warnings generated by this flag.
(cherry picked from commit ebeb1155d4fa6d28e2f40c92265245f8df097fcb)
From AOM. Don't actually add -Wsign-compare. It will be covered by
-Wextra.
Switch to vpx_integer.h from df9c9d6d4c43f02c58d4e776c53323788e013cbc
BUG=webm:1069
Change-Id: I1dc6e61caa5d56af4a55b6692ab620bb3144652a
Note: some of these warnings are enabled by a combination of -Wunused
(added earlier) and -Wextra.
Cherry-picked from AOM 4790a69faaec8f03d65f64ff070f6ab4307dbb16
Expands use of (void)x; on unused variables. AOM only supports one codec
in codec_factory.h
Does not include changes to HandleDecodeResult. AOM removed
invalid_file_test.cc which does use the video parameter.
Does not enable -Wextra yet. There are more issues to fix.
BUG=webm:1069
Change-Id: I322a1366bd4fd6c0dec9e758c2d5e88e003b1cbf
Current version does not build with options:
--enable-vp9-highbitdepth --enable-coefficient-range-checking
Change-Id: Ic3285f1a3e0d6be88da7f2cd8fa5a631368dd03b
Reduce the filt_guess for 1 pass cbr on inter-frames.
This reduces visual artifact seen in rtc clip (jimred.vga),
and improves metrics on rtc set.
Metrics on rtc set for cbr mode overall positive, most clips are up:
Speed 7 rtc: avgPSNR/SSIM up by: ~2.6/3.9%
Speed 8 rtc: avgPSNR/SSIM up by: ~1.3/2.5%
Change-Id: Ia4eccea1c19d65b583516df28823cd756c49464f
Added a cap on the maximum boost for an arf based on interval length.
Fixed bug where by the image size was not accounted for in determining
two of the motion breakout thresholds.
Overall small gains of 0.2-0.4% psnr but on large image format clips with
slow zooms the gain may be as much as 20% or more (e.g. in_to_tree
at 1080P)
Change-Id: Id0a47391203026742daa9c97afac5705fd8c4dfb
The value 35468 changes sign when stored in int16_t:
implicit conversion from 'int' to 'int16_t' (aka 'short')
changes value from 35468 to -30068
This negation requires adding back the original value to compensate.
Shifting the value keeps the value positive and saves a post-vqdmulh
shift.
This technique is used in webp and idct_dequant_full_2x_neon
BUG=b/28027557
Change-Id: I0c5ce09bea170fe08061856c2af6f841a557e0c3
This restores d9dce2f48e
Switched to using signed shift-and-narrow. Instead of saturating
negative results to 0, it was saturating them to 255.
BUG=webm:817
BUG=webm:1273
Change-Id: I571095336aa4182e3288b17924fcaaece42b0a49
removes some unnecessary casts and adds a few explicit uint32 ones for
larger sizes to quiet -Wshorten-64-to-32 warnings
Change-Id: I63c5fce8e62c426d5cf5c10a66a113c119a43518
Do nothing in vp9_highbd_iht#x#_##_add_c when input magnitude is beyond
20 bits. Note that, sign bit is not included here.
In the 20 bits, we use 12 bits for input signal, 7 bits for forward
transform amplification, and 1 bit for contingency in rounding and
quantizing
BUG=https://bugs.chromium.org/p/webm/issues/detail?id=1286
Change-Id: I332c6f68df4614fc2e7d2dc4c5bb0d0cff8a245c
When filtering it needs 6 pixels: 2 prior to the source, the source, and
3 after the source.
When filtering 16 wide, that means 21. To accomplish this the SSE2 reads
[-2] to [5], [6] to [13], and [14] to [21], a total of 24 bytes (reading
in groups of 8 is easy)
The filter then shifts this last set to the top half of the register and
uses 'or' to combine it with the previous set.
Valgrind detected an issue reading pixels [19], [20] and [21]:
Address 0x7f581c2 is 434 bytes inside a block of size 441 alloc'd
Note: we only need pixels [16], [17], and [18] as context for [15].
To fix this, it now reads 8 bytes starting at [11], which re-loads [11]
through [13], but stops at [18] and does not over-read any values.
This is shifted by 5 and 'or'd with xmm1. Although the lower bits are
not cleared, they overlap directly with [11] through [13], so 'or'
produces the correct results.
Change-Id: I0c89c03afa660fc9b0108ac055d7bd403e493320
On 32 bit machines 'new' does not always appear to allocate sufficiently
aligned buffers, causing intermittent test failures.
Change-Id: I0db4fc73782012e4eef71dc0fb540e74fdbfcebe
the --enable-postproc-visualizer configure option remains as a no-op as
do the control names and values for compatibility
+ remove the corresponding debug flags from vpxdec: --pp-*
Change-Id: I4a001cd9962b59560d7d6bda6272d4ff32b8d37c
similar to changes that were done in vp9 for encoded frame size
reporting. has the side-effect of quieting a -Wshorten-64-to-32 warning.
Change-Id: I89f74cb617fc29334ee351dc8dfaa3b8cfd4e5af
The referenced bug was fixed by saving neon registers. That this had any
effect was coincidental.
Both chromium and Android build with clang and neither uses this flag.
Change-Id: I470247d6fd9226fc207b42a187105581a94badc3
The vp9_mv_class0_tree is a balanced tree with two leafs and can
simply be coded as a boolean with probability class0[0].
Change-Id: If294dac825a5f945371092c74aa8e3f84cd962b6
(cherry picked from commit be8a8ab62ebdd111c6f2e9a33b15630570671eba)
assume __clang_major__==0 has the latest version of
_mm256_broadcastsi128_si256. fixes builds with custom clang toolchains.
BUG=b/30970831
Change-Id: I90becd56278e4716bd46e2ba9d910af977e8dfa6
The code only has issues when xoffset == 0 and yoffset == 0 which
represents a simple copy. Presumably this case does not need to be
handled because the issue has existed since 2010.
BUG=webm:1287
Change-Id: Ic47e2653f3b729e99b40e53d8d2d8d1501edaaa9
Build out the sixtap_predict test because the filters are
interchangeable. Add verbose failures and border checking.
Change-Id: I962f50041750dca6f8d0cd35a943424cf82ddcb1
This reverts commit d9dce2f48e.
Appears to be failing the SixtapPredict tests in some configurations and possibly test vectors as well.
Change-Id: Ica6aa83ebac47d0a76e451846e7da67b1c17a7d7
This function was removed when clang started introducing alignment hints
which caused the 32 bit vld1_lane_u32/vst1_lane_u32 to fail:
https://llvm.org/bugs/show_bug.cgi?id=24421
The load has been rendered safe with an implementation ~indiscernible
performance-wise that uses _u8 and over-reads just a touch.
It is still ~5x faster than C in the unaligned case and doing both
filters.
BUG=webm:892
BUG=webm:1273
Change-Id: Icf7167189391b46202f47233bb585c24c42bcc36
postproc.c is overloaded and used for both postproc and internal stats.
If only --enable-internal-stats is specified there are issues with
non-existent struct members and unused functions.
Change-Id: I82367f1ffce659c3918c9f964dbce94a716fbb89
All the other test which do not use 'pass' (which appears to be almost
all of them) do this.
Cleans -Wextra/-Wunused-parameter:
unused parameter ‘pass’
Change-Id: I1ff3acf3f3d1e831f94dcb00ea36337afe0aefe0
Remove the experiment LIMIT_QP_ONEPASS_VBR_LAG, as its
not currently used and no plan to use in near future.
Change-Id: Ib069f8d7225195be04b765d0ab477510dfba6a3b
This function was removed when clang started introducing alignment hints
which caused the 32 bit vld1_lane_u32/vst1_lane_u32 to fail:
https://llvm.org/bugs/show_bug.cgi?id=24421
The load has been rendered safe with an implementation ~indiscernible
performance-wise that uses _u8 and over-reads just a touch.
The store, when unaligned, has a version that is ~25% slower but safe
when xoffset = 0 (second pass filter only). When the first pass filter
(or both) are in play, the new version is almost identical in speed.
Worst case performance (both filters, unaligned stores) is roughly 3-4x
faster than C.
BUG=webm:817
BUG=webm:1273
Change-Id: I1e490e94453e0872151fe0dafb05557463f6247d
Use the canonical 'vpx_codec_dec_cfg_t()' as opposed to 'vp9_zero()'
which just hammered everything to 0.
Change-Id: Id820efef700ad92a625797f8fd58e465b15eeca4
For some reason allocated_decoding_thread_count is signed, but decoding_thread_count is not.
Cleans -Wextra/-Wsign-compare:
comparison between signed and unsigned integer expressions
Change-Id: Id0ada78100acff27c1c4ed7493c563d13c55cdcd
Use vp9_zero() to set every element.
Cleans -Wextra/-Wmissing-field-initializers:
missing initializer for member ‘vpx_codec_dec_cfg::w’
missing initializer for member ‘vpx_codec_dec_cfg::h’
Change-Id: I5b41ce7d55a912e29b1d4c3e840cea80e8510fbe
This change was reverted before due to a hangouts encode-time
regression investigation. But since then this change has been
cleared of causing any noticeable regression.
This mode reduces some false detection, and uses the
same model as in vp9.
Change-Id: I9c82a748c5f601d0aca9f61ee218abfbd58c62bd
* changes:
Enable -Wundef by default
Define VP8_TEMPORAL_ALT_REF to !CONFIG_REALTIME_ONLY
Remove CONFIG_DEBUG guards from assert()
Remove unused function vpx_de_mblock
Fix -Wundef warning for OUTPUT_FPF
Fix -Wundef warning for __SANITIZE_ADDRESS__
Added casts to remove warnings:
BUG=webm:1274
In regards to the safety of these casts they are of two types:-
- Normalized bits per (16x16) MB stored in a 32 bit int (This is safe as bits
per MB even with << 9 normalization cant overflow 32 bits. Even raw 12
bits hdr source even would only be 29 bits :- (4+4+12+9) and the encoder
imposes much stricter limits than this on max bit rate.
- Cast as part of variance calculations. There is an internal cast up to 64 bit
for the Sum X Sum calculation, but after normalization dividing by the number
of points the result will always be <= the SSE value.
Change-Id: I4e700236ed83d6b2b1955e92e84c3b1978b9eaa0
Previously VP8_TEMPORAL_ALT_REF was only defined for non-realtime-only
builds. However, its value was checked with #if, not #ifdef.
Fixes -Wundef warnings.
BUG=webm:1069
Change-Id: If78d8731298f3f0d3662ffa25f973e7adaf67152
Using a tighter resize constraint on undershoot seems to help
results (especially SSIM) as significant undershoot on a frame
seems to have more of a damaging impact than overshoot.
This patch has been tuned so that in local testing using the
derf set it is encode speed neutral for speed setting 2.
Average quality result for speed 2 (psnr,ssim) were as follows:-
lowres 0.039, 0.453
midres 0.249, 0.853
hdres 0.159, 0.659
NetFlix -0.241, 0.360
Change-Id: Ie8d3a0d7d6f7ea89d9965d1821be17f8bda85062
Fixes windows build issue:
==> tests::VS10_x64 is broken
LINK : warning C4742: 'kYvuI601Constants' has different alignment in 'third_party\libyuv\source\row_common.cc' and 'third_party\libyuv\source\planar_functions.cc': 32 and 2 [.build-x86_64-win64-vs10\vpxdec.vcxproj]
LINK : warning C4744: 'kYvuI601Constants' has different type in 'third_party\libyuv\source\row_common.cc' and 'third_party\libyuv\source\planar_functions.cc': '__declspec(align(32)) struct (224 bytes)' and 'struct (224 bytes)' [.build-x86_64-win64-vs10\vpxdec.vcxproj]
LINK : warning C4742: 'kYuvI601Constants' has different alignment in 'third_party\libyuv\source\row_common.cc' and 'third_party\libyuv\source\planar_functions.cc': 32 and 2 [.build-x86_64-win64-vs10\vpxdec.vcxproj]
LINK : warning C4744: 'kYuvI601Constants' has different type in 'third_party\libyuv\source\row_common.cc' and 'third_party\libyuv\source\planar_functions.cc': '__declspec(align(32)) struct (224 bytes)' and 'struct (224 bytes)' [.build-x86_64-win64-vs10\vpxdec.vcxproj]
LINK : warning C4742: 'kYvuI601Constants' has different alignment in 'third_party\libyuv\source\row_common.cc' and 'third_party\libyuv\source\planar_functions.cc': 32 and 2 [.build-x86_64-win64-vs10\vpxenc.vcxproj]
LINK : warning C4744: 'kYvuI601Constants' has different type in 'third_party\libyuv\source\row_common.cc' and 'third_party\libyuv\source\planar_functions.cc': '__declspec(align(32)) struct (224 bytes)' and 'struct (224 bytes)' [.build-x86_64-win64-vs10\vpxenc.vcxproj]
LINK : warning C4742: 'kYuvI601Constants' has different alignment in 'third_party\libyuv\source\row_common.cc' and 'third_party\libyuv\source\planar_functions.cc': 32 and 2 [.build-x86_64-win64-vs10\vpxenc.vcxproj]
LINK : warning C4744: 'kYuvI601Constants' has different type in 'third_party\libyuv\source\row_common.cc' and 'third_party\libyuv\source\planar_functions.cc': '__declspec(align(32)) struct (224 bytes)' and 'struct (224 bytes)' [.build-x86_64-win64-vs10\vpxenc.vcxproj]
LINK : error C2220: warning treated as error - no 'executable' file generated [.build-x86_64-win64-vs10\vpxdec.vcxproj]
LINK : error C2220: warning treated as error - no 'executable' file generated [.build-x86_64-win64-vs10\vpxenc.vcxproj]
Change-Id: Ic3c4fff9209f5a52ff8f8ff321548d49ba09ec06
removes the need for an intermediate cast to int, which was missing in
the call added in:
69c5ba1 vpx_mem: Refactor code
quiets a visual studio warning:
C4146: unary minus operator applied to unsigned type, result still
unsigned
Change-Id: I76c4003416759c6c76b78f74de7c0d2ba5071216
This patch is to address concerns that changes to allow
recodes on the first frame in each ARF group do not give a
good enough speed quality trade off for speed 2. Though the
average impact on encode speed is 1-2%, for some hard clips
it is > 5% rise. For speed 1 this is less an issue and for Speed 0
the previous patch actually improves speed.
Change-Id: Ie1bcefdbfdf846d3f4428590173f621465dffe3a
This corrects a formatting error introduced in:
I1e9d548ce445d29002f0c59ebfd3957a6f15e702
where spaces were used as delimiters instead of tabs.
The corresponding fix for vp10 is in
Ica3d625d6672b3c47e0e208b45eede29b9004030.
Change-Id: Ibc4eb8fd82e6b926ba259a679dc98557cadba9b1
Current commit is just an API template for the rest of the code, and
I will add inner logic later.
Altref frames generate a lot of bitrate and at the same time
other frames refer to them a lot, so it makes sense to apply
special compensation-based adaptive quantization scheme for altref
frames. E.g., for blocks that are good predictors for the future
apply rate-control chosen quantizer while for bad predictors apply
worse one.
Change-Id: Iba3f8ec349470673b7249f6a125f6859336a47c8
Previously Tx domain rd was used in all cases above speed 0.
Coefficient optimization was only enabled for best and speed 0.
This patch selectively sets these features at other speed settings
based on block complexity.
For the Netflix and HD sets in particular the quality gains are
large compared to the speed hit. At speed 1 the average psnr
gain in the NF set is > 2.5% with one clip coming in at 18%
and some points almost 30%. Average gains for the lower
resolution test sets are around 1%.
The gains are biggest at low Q so some further optimization
may be possible.
Change-Id: I340376c7b2a78e5389a34b7ebdc41072808d0576
fixes SSE2/AddNoiseTest.CheckCvsAssembly/0 with -funsigned-char.
visibly broken since:
0dc69c7 postproc : fix function parameters for noise functions.
where the types diverged (char vs. int8)
but likely the return changed in:
2ca24b0 postproc - move filling of noise buffer to vpx_dsp.
when multiple implementations were merged.
Change-Id: I176ca1f170217f05ba7872b0c4de63e41949e999
set a max allocable size to prevent overflows in 32-bit and extremely
large allocation attempts in 64-bit. this could be amended to allow size
or num parameters to be 64-bits with the correct size being used at each
call site.
BUG=webm:819
Change-Id: Ia81004d6c4279680714c4488b4f6cf287ab396a5
vpx_realloc was allocating 1 byte more than needed every time.
Fixed this, and took this opportunity to do a small refactoring.
Change-Id: I38fcb62b698894acbbab43466c1decd12f906789
(cherry picked from aom: 2a876b4 aom_realloc correction.)
In the future this option will activate adaptive quantization special
for altref frames. Encoder will create the adaptive quantization map
on the basis of lookahead buffers similarity which is the estimate of
the future motion compensation performance.
Change-Id: Ia0088b3babb0f9a4899c79d8d819947ba5a03df2
This function only exists as a shortcut to subpixel variance with
predefined offsets. xoffset = 4 for horizontal, yoffset = 4 for vertical
and both for "hv"
Removing this allows the existing optimizations for the variance
functions to be called. Instead of having only sse2 optimizations, this
gives sse2, ssse3, msa and neon.
BUG=webm:1273
Change-Id: Ieb407b423b91b87d33c4263c6a1ad5e673b0efd6
decoding the same invalid keyframe twice would result in a crash as the
second time through the decoder would be assumed to have been
initialized as there was no resolution change. in this case the
resolution was itself invalid (0x6), but vp8_peek_si() was only failing
in the case of 0x0.
invalid-vp80-00-comprehensive-018.ivf.2kf_0x6.ivf tests this case by
duplicating the first keyframe and additionally adds a valid one to
ensure decoding can resume without error.
BUG=b/30593765
Change-Id: If0859035908b7870d67a7f3f646b5a080252eb6d
Disabled the split mode while encoding 4k video to speed
up the encoder.
Borg test result on 4k set:
Overall PSNR: +0.029%; SSIM: +0.009%.
Average encoder speedup at speed 2 is 2.5%.
Change-Id: I1519c658f07c3ac838affbe5aff0ed9b94f3f8f4
Adjusted speed 2 features to speed up 4k video encoding.
BDBR results from borg test:
PSNR: +0.313%; SSIM: +0.268%.
Average speedup: 8.5%
Change-Id: I1e2695a01fb3f3817c1df4480e184c2aed8f2eba
this fixes a crash in vp9_dec_setup_mi() via
vp9_init_context_buffers() should decoding continue and the decoder
resyncs on a smaller frame
BUG=b/30593752
Change-Id: I9ce8d94abe89bcd058697e8bd8599690e61bd380
Bias towards base_mv and skip 1/4 pixel motion search when using base mv.
2~3% speed up for 2 spatial layers, 3~5% speed up for 3 spatial layers.
PSNR loss:
(2 layers) 0.07dB for gips_stationary, 0.04dB for gips_motion;
(3 layers) 0.07dB for gips_stationary, 0.06dB for gips_motion.
Change-Id: I773acbda080c301cabe8cd259f842bcc5b8bc999
Add option, for newmv-last, to limit the rd-threshold update for early exit,
under a source varianace condition.
This can improve visual quality in low texture moving areas,
like forehead/faces.
Also add bias against golden to improve the speed/fps,
will little/negligible loss in quality.
Only affects CBR mode, non-svc, non-screen-content.
Change-Id: I3a5229eee860c71499a6fd464c450b167b07534d
The flag was added because Apple clang and Chromium clang disagreed
for certain versions of instructions.
qsubaddx, qaddsubx, ldrneb and ldrneh were used in armv6 assembly
which was removed in d55724fae9
vqshrun was used in some neon assembly but superseded by
dcbfacbb98
.include was used for obj_int_extract/asm_offsets and removed in
6eec73a747
Change-Id: I32f4c9b536d0318482101c0b8e91e42b8f545f18
Changes the default recode rule for Speed 0 and best quality
from ALLOW_RECODE to ALLOW_RECODE_KFARFGF.
Tested on the NF, hdres, midres and lowres test sets, this setting
when combined with patch I40cb559... now performs "as well" in
metrics terms (in fact it came out a tiny amount better overall)
but encode time is 9.6% faster (measured as the average
from 27 mid rate local encodes on clips in the derf/lowres set.
Change-Id: I8c781c0cdfa3a9929cd9406d15582fce47d6ae3b
Allow recodes for the first inter frame in each arf group
even when the recode rule is set to ALLOW_RECODE_KFARFGF.
Small gains of 0.05%.
Change-Id: I40cb559d36a2bf0ebf5cf758c3f92e452b480577
disable clang-format for bilinear_filters_avx2
restores the row layout prior to:
099bd7f vpx_dsp: apply clang-format
but keeps the justification used by clang-format
Change-Id: Icf1733a37edb807e74c26b23a93963c03bd08fd7
This patch fixed a motion vector out of range bug:
vpxenc: ../libvpx/vp9/encoder/vp9_mcomp.c:69:
mv_cost: Assertion `mv->col >= -((1 << (11 + 1 + 2)) - 1) &&
mv->col < ((1 << (11 + 1 + 2)) - 1)' failed.
For blocks that returned without having full-pixel search, the original
MV limits were not restored, which caused the failure. Moved the set
MV limit function down to fix the bug.
Change-Id: Id7d798fc7214e95c6e4846c588f0233fcf1a4223
_beginthreadex does not align the stack on 16-byte boundary as expected
by gcc.
On x86 targets, the force_align_arg_pointer attribute may be applied to
individual function definitions, generating an alternate prologue and
epilogue that realigns the run-time stack if necessary. This supports
mixing legacy codes that run with a 4-byte aligned stack with modern
codes that keep a 16-byte stack for SSE compatibility.
https://gcc.gnu.org/onlinedocs/gcc/x86-Function-Attributes.html
Change-Id: Ie4e4ab32948c238fa87054d5664189972ca6708e
Signed-off-by: Aleksey Vasenev <margtu-fivt@ya.ru>
prevents use of an uninitialized value in the deconstructor should the
test fail before tmpfile_ is set.
Change-Id: I8b49fd05f0d05e055fdf653bd46983d30f466a68
applied against a x86_64 configure with and without
--enable-vp9-highbitdepth
clang-tidy-3.7.1 \
-checks='-*,google-readability-braces-around-statements' \
-header-filter='.*' -fix
+ clang-format afterward
Change-Id: Ia2993ec64cf1eb3505d3bfb39068d9e44cfbce8d
Extract the duplicated data generation code in OperationCheck() of
Loop8Test6Param and Loop8Test9Param, and put in function InitInput().
Change-Id: Ied39ba4ee86b50501cc5d10ebf54f5333c4708f0
This patch fixed a motion vector(MV) out of range bug, which was caused
by not restoring the original values of the MV min/max thresholds after
the sub8x8 full pixel motion search. It occurred rarely and only was seen
while encoding a 4k clip for 200 frames.
BUG=webm:1271
Change-Id: Ibc4e0de80846f297431923cef8a0c80fe8dcc6a5
* changes:
Use common transpose for vpx_idct32x32_1024_add_neon
Use common transpose for vpx_idct8x8_[12|64]_add_neon
Use common transpose for vp9_iht8x8_add_neon
Use common transpose for vpx_idct16x16_[10|256]_add_neon
The code was expanding to Q registers so that vqrshn could be used, for
vector quad round shift and narrow. If 4 values are added together,
there is a shift by 2. If 8 values, a shift by 3. Since this accounts
for any possibility of overflow, we can skip the narrowing shift.
This allows keeping the values in D registers and casting the 16 bit
value to 8 bits.
Change-Id: I8d9cfa07176271f492c116ffa6a7b351af0b8751
The neon intrinsics are not able to load just the 4 values that are
used. In vpx_dsp/arm/intrapred_neon.c:dc_4x4 it loads 8 values for both
the 'above' and 'left' computations, but only uses the sum of the first
4 values.
BUG=webm:1268
Change-Id: I937113d7e3a21e25bebde3593de0446bf6b0115a
Increase the minimum distance.
Reduces the overshoot somewhat on some clips,
small gain in avgPSNR (~0.1%) on ytlive set.
Change-Id: Id5ddde20c2907dbdb536e79542eff775019c142b
This error was introduced by the patch:
8ce67d7 vp9 svc: Enable different speed setting for each spatial layer.
To use svc, svc_param should be cleared to 0 at the beginning.
Change-Id: I222f03ddae8a50e84b4690b78263abb742fae91e
Move best index into the token state. Shrink it down to one byte. This
is more cache friendly (access are group together) and uses less total
memory.
Results in 4% fewer cycles in optimize_b().
Change-Id: I75db484fb3dc82f59928d54b659d79c80ee40452
everything outside of third_party should follow 'PointerAlignment:
right' i.e., associate the '*' with the variable
+ add a note about the clang-format that generated this file
Change-Id: I13e3f4f5fb6e22a8fa7fc3d06879c995b7c41a39
- make Check() void as the EXPECT's are sufficient to document failure
cumulatively this has the effect of avoiding reporting incorrect Check()
failures due to earlier test failures.
Change-Id: I2cf775449f18c90c1506b8eadd7067adbc3ea046
The LLVM trunk has reached 4.0 and now __clang_major__ is not enough
to distinguish between old XCode Clang and the new 'real' Clang.
Using __apple_build_version__ allows to make this distinction.
BUG=chromium:631144
Change-Id: I0b6e46fddfe4f409c7b7e558bda34872e60ee2d9
Shutdown all threads before reclaiming any memory. The frame-level
parallel decoder may access data from another worker.
BUG=webm:1259
Change-Id: I26856ebd1f77cc4a4545331baa19bbf3e01c4ea4
1 - stops de allocating before threads are closed.
2 - limits threads to mb_rows when mb_rows < partitions
BUG=webm:851
Change-Id: I7ead53e80cc0f8c2e4c1c53506eff8431de2a37e
This commit changes the call in vp9 encoder from vp9_deblock() to
vp9_post_proc_frame() to ensure the data structures used in the call
are properly allocated. This fixes an encoder crash when configured
with --enable-internal-stats.
Change-Id: I2393b336c0f566665336df4f1ba91c405eb56764
bitstream.c: asserts are disabled when CONFIG_DEBUG is unset
vp8_dx_iface.c: split |s into 2 statements across #if bounds
Change-Id: I307d1e969134db5c9c0edd7690589b6b29116cbd
allows 'make test_libvpx', etc. some reworking of the makefiles would be
needed to avoid hard coding targets here.
Change-Id: I18982dbf691e7d36ab8bcf5934bab9340687b061
remove some (but not all yet!) tuple mis-use, and revamp the code a lot.
Factorize some common chores into MainTestClass.
Change-Id: Id37b7330eebe80d19b9d12a454f24ff9be6b1116
Allow usage of lookahead for VBR in real-time mode, for 1 pass vbr.
Current usage is for fast checking of future scene cuts/changes,
and adjusting rate control (gf interval and active_worst/target size).
Added unittests (datarate) for 1 pass vbr mode, with non-zero lag.
Added an experimental option to limit QP based on lookahead.
Overall positive gain in metrics on ytlive set:
avgPNSR/SSIM up on average ~1-3%; several clips up by 5, 7%.
Change-Id: I960d57dfc89de121c4824b9a9bf88d2814e74b56
Chromium changed the upstream default to --squash but this conflicts
with libvpx historical defaults.
Change-Id: I80f2f2b48e2ba08e02184b50e6d5f8f5e76fec24
remove some (but not all yet!) tuple mis-use, and revamp the code a lot.
Factorize some common chores into MainTestClass.
Change-Id: Ia14f3924140e8545e4f10d0504475681baae8336
* changes:
vpx_thread: use CreateThread for windows phone
vpx_thread: use WaitForSingleObjectEx if available
vpx_thread: use InitializeCriticalSectionEx if available
vpx_thread: use native windows cond var if available
vpx_thread.[hc]: update webp source reference
This change eliminates redundant computation in the two stage
downscaling, which saves ~1% encoding time in 3-layer svc encoding.
Change-Id: Ib4b218811b68499a740af1f9b7b5a5445e28d671
Modify the gfu_boost and af_ratio setting based on the
average frame motion level.
Change only affects 1 pass vbr.
Metrics overall positive on ytlive set.
On average up by ~1%, several clips up by 2-4%.
Change-Id: Ic18c49eb2df74cb4986b63cdb11be36d86ab5e8d
Use the precise context to estimate the zero token cost in trellis
optimization process. This improves the speed 0 coding performance
by 0.15% for lowres and 0.1% for midres. It improves the speed 1
coding performance by 0.2% for midres and hdres.
Change-Id: I59c7c08702fc79dc4f8534b64ca594da909e2c91
This commit allows the inter prediction residual to use uniform
quantization followed by trellis coefficient optimization in
speed 0. It improves the coding performance by
lowres 0.79%
midres 1.07%
hdres 1.44%
Change-Id: I46ef8cfe042a4ccc7a0055515012cd6cbf5c9619
Move the operations that update the context buffers outside this
function. The coeff_cost() takes all input as const value and returns
the coefficient cost.
This makes preparation for the next coefficient optimization CLs.
Change-Id: I850eec6e5470b91ea84646ff26b9231b09f70a0c
Replace the existing mv bias with a bias only for
NEWMV, and based on the motion vector difference of
its top/left neighbors.
For cbr non-screen-content mode.
Change-Id: I8a8cf56347cfa23e9ffd8ead69eec8746c8f9e09
Use a measure of noise energy to adjust Q estimate and
arf filter strength.
Gains 0.3-0.5% on Lowres and |Netflix sets.
Hdres and Midres neutral.
Change-Id: Ic0de552e7b6763e70eeeaa3651619831b423e151
Use pixel domain distortion metric in speed 0. This improves the
compression performance by 0.3% for both low and high resolution
test sets.
Change-Id: I5b5b7115960de73f0b5e5d0c69db305e490e6f1d
Safer to have the decoder operate normally and have
better-hw-compatibility only implement encoding changes.
Fixes some test failures.
Change-Id: I0dd70d002e4e893992f0cd59774b9363e6f7fe76
For real time CBR mode, use model_rd_for_sb_y for 32x32 if the sb is
a skin sb to avoid visual regression on the slowly moving face.
Refer to the cl: https://chromium-review.googlesource.com/#/c/356020/
Change-Id: I42c36666b2b474ce5ee274239d52ae8ab400fd46
The transform block row and column positions are always available
outside the callees. There is no need to re-compute these values
again. This approach has been used by the decoder. This commit
removes txfrm_block_to_raster_xy() function.
Change-Id: I5b90f91a0d8b7c35cfa7d171da9edf8202630108
BUG=b/29583578
original webp change:
commit d2afe974f9d751de144ef09d31255aea13b442c0
Author: James Zern <jzern@google.com>
Date: Mon Nov 23 20:41:26 2015 -0800
thread: use CreateThread for windows phone
_beginthreadex is unavailable for winrt/uwp
Change-Id: Ie7412a568278ac67f0047f1764e2521193d74d4d
100644 blob 93f7622797f05f6acc1126e8296c481d276e4047 src/utils/thread.c
100644 blob 840831185502d42a3246e4b7ff870121c8064791 src/utils/thread.h
Change-Id: Iade8fff6367b45534986c77ebe61abeb45bce0f8
BUG=b/29583578
original webp change:
commit 0fd0e12bfe83f16ce4f1c038b251ccbc13c62ac2
Author: James Zern <jzern@google.com>
Date: Mon Nov 23 20:40:26 2015 -0800
thread: use WaitForSingleObjectEx if available
Windows XP and up
Change-Id: Ie1a46a82722b8624437c8aba0aa4566a4b0b3f57
100644 blob d58f74e5523dbc985fc531cf5f0833f1e9157cf0 src/utils/thread.c
100644 blob 840831185502d42a3246e4b7ff870121c8064791 src/utils/thread.h
Change-Id: If165c38b378c6e0c55e17a1b071efd3ec3e7dcdd
BUG=b/29583578
original webp change:
commit 63fadc9ffacc77d4617526a50c696d21d558a70b
Author: James Zern <jzern@google.com>
Date: Mon Nov 23 20:38:46 2015 -0800
thread: use InitializeCriticalSectionEx if available
Windows Vista / Server 2008 and up
Change-Id: I32c5b4e5384d614c5a821ef511293ff014c67966
100644 blob f84207d89b3a6bb98bfe8f3fa55cad72dfd061ff src/utils/thread.c
100644 blob 840831185502d42a3246e4b7ff870121c8064791 src/utils/thread.h
Change-Id: I9ce49b3a86857267e504cd8ceab503b7b441d614
BUG=b/29583578
original webp change:
commit 110ad5835ecd66995d0e7f66dca1b90dea595f5a
Author: James Zern <jzern@google.com>
Date: Mon Nov 23 19:49:58 2015 -0800
thread: use native windows cond var if available
Vista / Server 2008 and up. no speed difference observed.
Change-Id: Ice19704777cb679b290dc107a751a0f36dd0c0a9
100644 blob 4fc372b7bc6980a9ed3618c8cce5b67ed7b0f412 src/utils/thread.c
100644 blob 840831185502d42a3246e4b7ff870121c8064791 src/utils/thread.h
Change-Id: Iede7ae8a7184e4b17a4050b33956918fc84e15b5
these are debug-only modules that can be added in manually when needed.
leave a reference in vp8_common.mk / vp9_common.mk for easy addition.
quiets -Wmissing-prototypes warning
BUG=b/29584271
Change-Id: Ifc8637d877edfbd562b34dc5c540428bba7951fc
Moved the API patch from NextGenv2. An example was included.
To try it, for example, run the following command:
$ examples/vpx_cx_set_ref vp9 352 288 in.yuv out.ivf 4 30
Change-Id: I4cf8f23b86d7ebd85ffd2630dcfbd799c0b88101
The scaling of the threshold for 10 and 12 bit here appears
to be in the wrong direction. For 10 and 12 bit we expect sse
values to be higher and hence the threshold used should be
scaled up not down.
Change-Id: I2678116652b539aef48100e0f22873edd4f5a786
This function seems to scale the threshold for testing an
SSE value in the wrong direction for 10 and 12 bit inputs.
Also for a true SSE the scalings should probably be << 4 and 8
Change-Id: Iba8047b3f70d04aa46d9688a824f3d49c1c58e90
CONVERT_TO_BYTEPTR(x) was corrected in:
003a9d2 Port metric computation changes from nextgenv2
to use the more common (x) within the expansion. offsets should occur
after converting the pointer to the desired type.
+ factorized some common expressions
Change-Id: I171c3faaa5606d098e984baa9aa74bb36042f57f
Force enable x86inc.asm when building for x86. Previously there were
compatibility issues so a flag was added to simplify disabling this
code.
The known issues have been resolved and x86inc.asm is the preferred
abstraction layer (over x86_abi_support.asm).
BUG=b:29583530
Change-Id: Ib935e97b37ffb22d7af72ba0f04564ae6280f1fd
inadvertently lost in the final patchset of:
078dff7 configure: remove old visual studio support (<2010)
this prevents an empty CONFIG_VS_VERSION and avoids make failure
Change-Id: I529d52eca59329e2715309efd63d80f0e1fed462
For real time CBR mode, use model_rd_for_sb_y for 32x32 if the mode is
newmv last, which is less aggressive in skipping transform and
quantization, to avoid quality regression in some conditions.
Change-Id: Ifa30be587f2a8a4a7f182a172de6ce277c0f8556
Speed test shows the new vertical filters have degradation on Celeron
Chromebook. Added "X86_SUBPIX_VFILTER_PREFER_SLOW_CELERON" to control
the vertical filters activated code. Now just simply active the code
without degradation on Celeron. Later there should be 2 set of vertical
filters ssse3 functions, and let jump table to choose based on CPU type.
Change-Id: Iba2f1f2fe059a9d142c396d03a6b8d2d3b981e87
Due to rounding, hbd variance may become negative. This commit put in
check and clamp of negative values to 0.
Change-Id: I610d9c8aa2d4eebe7bc5f2c5624a9e3cadad4c94
For forced key frames in particular this helps to make them
blend better with the surrounding frames where noise tends
to be suppressed by a combination of quantization and alt
ref filtering.
Currently disabled by default under and IFDEF flag pending
wider testing.
Change-Id: I971b5cc2b2a4b9e1f11fe06c67ef073f01b25056
Bug fix: The crash is caused by not allocating buffer for prev_mip in
postproc_state and prev_mip in postproc_state is only used for MFQE,
ohter postproc modules, deblocking and etc., should not use it.
BUG=webm:1251
Change-Id: I3120d2f50603b4a2d400e92d583960a513953a28
add a trailing ':', though it's optional with the tools we support, it's
more common to use it to mark a label. this also quiets the
orphan-labels warning with nasm/yasm.
BUG=b/29583530
Change-Id: I46e95255e12026dd542d9838e2dd3fbddf7b56e2
For real-time mode, increase variance threshold for 32x32 blocks in
var-based partitioning for resolution >= 720p, so that it is more
likely to stay at 32x32 for high resolution which accelerates the
encoding speed with little/no PSNR drop.
PSNR effect on different speed settings:
speed 8 rtc: 0.02 overall PSNR drop, 0.285% SSIM drop
speed 7 rtc: 0.196% overall PSNR increase, 0.066% SSIM increase
speed 5 rtc_derf: no effect.
Speed up:
gips_motion_WHD, 1mbps: 2.5% faster on speed 7, 2.6% faster on speed8
gips_stat_WHD, 1mbps: 4.6% faster on speed 7, 5.6% faster on speed8
Change-Id: Ie7c33c4d2dd7d09294917e031357fc5476c3a4bb
Avoids a segfault in high-bitdepth builds.
This restores the condition to its state prior to:
7991241 vp9: Change the scheme for modeling rd for bsize 32x32.
BUG=webm:1250
Change-Id: I6183d5b34cb89dfbf27b7bb589812148a72cd7de
For real-time CBR mode, use model_rd_for_sb_y_large instead of
model_rd_for_sb_y for 32x32 block. In the former model, transform
might be skipped more aggressively in some condtions, which speeds
up encoding time with only a little PSNR/SSIM drop on rtc test set.
No obvious visual quality regression.
PSNR effect on different speed settings:
speed 8 rtc: 0.129% overall PSNR drop, 0.137% SSIM drop
speed 7 rtc: 0.135% overall PSNR drop, 0.062% SSIM drop
speed 5 rtc_derf: 0.105% overall PSNR drop, 0.095% SSIM drop
Speed up:
gips_motion_WHD, 1mbps: 3.29% faster on speed 7, 2.56% faster on speed8
gips_stat_WHD, 1mbps: 2.17% faster on speed 7, 1.62% faster on speed8
BUG=webm:1250
Change-Id: I818babce5b8549b4b1a7c3978df8591bffde7173
Use quotes whenever possible and {} always for variables.
Replace multiple set_all calls with *able_feature().
Change-Id: If579d3f718bd4133cf1592b4554a8ed00cf9f2d3
decoder_peek_si_internal could potentially read more bytes than
what actually exists in the input buffer. We check for the buffer
size to be at least 8, but we try to read up to 10 bytes in the
worst case. A well crafted file could thus cause a segfault.
Likely change that introduced this bug was:
https://chromium-review.googlesource.com/#/c/70439 (git hash:
7c43fb6)
BUG=chromium:621095
Change-Id: Id74880cfdded44caaa45bbdbaac859c09d3db752
When building without multithreading and for a non-arm, non-x86 system,
ctx is unused.
Cleans up -Wextra warning:
unused parameter ‘ctx’ [-Werror=unused-parameter]
Change-Id: Ifddff89d2ebd45f7d71e3d415a8f2415dd818957
'duration' is not used in realtime-only mode:
Cleans up -Wextra warning:
unused parameter 'duration' [-Wunused-parameter]
Change-Id: I827dfe59ebcdc72c5a93fdf7e5aca063433914b1
In vp9_pick_inter_mode(), instead of using
vp9_get_pred_context_switchable_interp(xd) to assign filter_ref,
we use a less strict condition on assigning filter_ref.
This is to reduce the probabily of entering the flow of not
assigning filter_ref and then skipping filter search.
Overall PSNR gain 0.074% for rtc dataset
Details:
Low Mid High
0.185% -0.008% -0.082%
Change-Id: Id5c5ab38d3766c213d5681e17b4d1afd1529e676
Allows building simple targets with sane default flags.
For example, using the Android arm64 toolchain from the NDK:
https://developer.android.com/ndk/guides/standalone_toolchain.html
./build/tools/make-standalone-toolchain.sh --arch=arm64 \
--platform=android-24 --install-dir=/tmp/arm64
CROSS=/tmp/arm64/bin/aarch64-linux-android- \
~/libvpx/configure --target=arm64-linux-gcc --disable-multithread
BUG=webm:1143
Change-Id: I06f5a7564f5382cf1a4bad41aef4308566c53adf
Speed test shows the new vertical filters have degradation on Celeron
Chromebook. Added "X86_SUBPIX_VFILTER_PREFER_SLOW_CELERON" to control
the vertical filters activated code. Now just simply active the code
without degradation on Celeron. Later there should be 2 set of vertical
filters ssse3 functions, and let jump table to choose based on CPU type.
Change-Id: I37e3e9c5694737d9134a6bce6698d3e43f8fc962
For real-time CBR mode, use model_rd_for_sb_y_large instead of
model_rd_for_sb_y for 32x32 block. In the former model, transform
might be skipped more aggressively in some condtions, which speeds
up encoding time with only a little PSNR/SSIM drop on rtc test set.
No obvious visual quality regression.
PSNR effect on different speed setting:
speed 8 rtc: 0.129% overall PSNR drop, 0.137% SSIM drop
speed 7 rtc: 0.135% overall PSNR drop, 0.062% SSIM drop
speed 5 rtc_derf: 0.105% overall PSNR drop, 0.095% SSIM drop
Speed up:
gips_motion_WHD, 1mbps: 3.29% faster on speed 7, 2.56% faster on speed8
gips_stat_WHD, 1mbps: 2.17% faster on speed 7, 1.62% faster on speed8
Change-Id: I902f62def225ea01c145d7e5a93497398b8f5edf
Due to rounding used computation, HDB variance computation may produce
slightly negative values. This commit adds clamping to make sure
output variance values for 10 and 12 to be non-negative.
Change-Id: Id679aa55a4c201958c4c7d28cd8733b9246a71c8
This commit adds an encoder workaround to support better
compatibility with a non-compliant hardware vp9 profile 2 decoder.
The known issue with this decoder is:
The decoder assumes a wrong value, 127 instead of the correct
value of 511 and 2047, for any assumed top-left corner pixel in
UV planes for 10 and 12 bit, respectively. Such assumed
top-left corner pixel is used for INTRA prediction when a real
decoded/reconstructed pixel is not avalable, e.g. when it is
located inside the row above the top row or inside the column
left to the leftest column of a video image.
Change-Id: Ic15a938a3107e1b85e96cb7903a5c4220986b99d
decoding is done if the decoder is available, with errors handled
accordingly. the encoded frame count should be sufficient for this test.
+ remove HandleDecodeResult() as it's redundant given the base
implementation
BUG=webm:1233
Change-Id: I513c1c3475c58a746f4df627491bdc392fe21416
development has moved to the nextgenv2 branch and a snapshot from here
was used to seed aomedia
BUG=b/29457125
Change-Id: Iedaca11ec7870fb3a4e50b2c9ea0c2b056a0d3c0
This commit refactors the trellis coefficient optimization process.
It saves multiplications used to generate the final dequantized
coefficients. It removes two memset operations on quantized
and dequantized coefficient sets. This improves the unit speed
by 10%.
Change-Id: I23f47c6e14582520a7f952f03ce8f72183e7f0e6
Each time a codec is enabled or disabled with the umbrella
--enable-vpN flag, set the encoder and decoder configurations as well.
This was done as a post-processing step but doing that lost the order of
the arguments.
BUG=webm:1205
Change-Id: Ic629bfdd06acc04bc5a7227309f36bba54dad8b1
Since combining VPX_DL_REALTIME with VPX_RC_FIRST_PASS is basically
nonsense, ignore the user's pass setting when this happens and
behave as if the requested encode is a single pass encode.
BUG=webm:1233
Change-Id: I5ee4c4e5838c4ca6d24988890aae490b10826db2
The logic can be incorporated into configure.sh
Removes a dependency on ios-version.sh which was not part of DIST-SRCS
and removes a warning from 'make dist' sub builds:
../src/build/make/configure.sh: line 787:
../src/build/make/ios-version.sh: No such file or directory
Change-Id: Ic38314708eb278dd9d2a9769a670da32f6126637
This value is signed in vp9/10
Cleans warning in Android build:
comparison of integers of different signs: 'unsigned int' and 'int'
if (cpi->frames_since_golden == (cpi->current_gf_interval >> 1))
~~~~~~~~~~~~~~~~~~~~~~~~ ^ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Change-Id: Ie137724982f3a46c8c1820548c1960d62a4e96f2
left_above_mv and above_block_mv return as_int
as_int is defined as uint32_t in vp8/common/mv.h
Cleans up -Wextra warnings:
signed and unsigned type in conditional expression
this_mv->as_int = col ? d[-1].bmi.mv.as_int : left_block_mv(mic, i);
^
this_mv->as_int = row ? d[-4].bmi.mv.as_int : above_block_mv(mic, i, mis);
^
left_mv.as_int = col ? d[-1].bmi.mv.as_int :
^
Change-Id: Ia043764e4ce93d2152d2269b1c7b28b5d5f814cf
This commit change to use int64_t to represent the sum of pixel
differences, which can be negative.
This fixes a number of ubsan warnings.
BUG=webm:1219
Change-Id: I885f245ae895ab92ca5f3b9848d37024b07aac98
Use ~15 instead of 0x..F0
Cleans warning in Android build:
comparison of integers of different signs: 'unsigned int' and 'int'
if (((cm->Width + 15) & 0xfffffff0) !=
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ^
comparison of integers of different signs: 'unsigned int' and 'int'
((cm->Height + 15) & 0xfffffff0) !=
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ^
Change-Id: Iac25839cde3425b7b9db7f33740dc46a551b7546
For VBR: (1) allow newmv mode for golden ref to
select interpolation filter (as in last ref case), and
(2) don't use the more aggressive tx-skip testing logic for large blocks.
Only affects 1 pass real-time vbr mode (speed >= 5).
PSNR/SSIM metrics on ytlive set are all positive, ~0.5-2% gain.
Change-Id: I0ffbb0a9755563a5acd6230c58236e4f19a47266
This change is only for real-time mode if short_circuit_low_temp_var
is on. Add bias to last frame in choosing ref frame for partitioning,
when y_sad and y_sad_g are close. It speeds up real-time encoding by
0.5% on some clips with less than 0.1% overall PSNR drop on rtc test set.
Change-Id: I2a2110fe36455f3d8f0fc404aef2228f512e8df8
Cleans warning in Android build:
comparison of integers of different signs: 'unsigned int' and 'int'
int n = (int)VPXMIN(sizeof(clear_buffer), data_end - data);
^ ~~~~~~~~~~~~~~~~~~~~ ~~~~~~~~~~~~~~~
Change-Id: I964355ceae6b39e22c0196294b25e28387f84945
Defined as unsigned in VP8_CONFIG
Cleans warning in Android build:
comparison of integers of different signs: 'unsigned int' and 'int'
if (cpi->oxcf.number_of_layers != prev_number_of_layers)
~~~~~~~~~~~~~~~~~~~~~~~~~~ ^ ~~~~~~~~~~~~~~~~~~~~~
Change-Id: I969e64cd2bfda6e61c564476dbd35b892b177646
The vpx_roi_map_t and vpx_active_map_t structures use unsigned rows
and cols but VP8_COMMON uses signed values for mb_rows and mb_cols.
Cleans warning in Android build:
comparison of integers of different signs: 'int' and 'unsigned int'
if (cpi->common.mb_rows != rows || cpi->common.mb_cols != cols)
~~~~~~~~~~~~~~~~~~~ ^ ~~~~
comparison of integers of different signs: 'int' and 'unsigned int'
if (cpi->common.mb_rows != rows || cpi->common.mb_cols != cols)
~~~~~~~~~~~~~~~~~~~ ^ ~~~~
comparison of integers of different signs: 'unsigned int' and 'int'
if (rows == cpi->common.mb_rows && cols == cpi->common.mb_cols)
~~~~ ^ ~~~~~~~~~~~~~~~~~~~
comparison of integers of different signs: 'unsigned int' and 'int'
if (rows == cpi->common.mb_rows && cols == cpi->common.mb_cols)
Change-Id: If1f118c20ffefd2530fbd371e6787cc8a6c31f0a
Mode is signed
Cleans warning in Android build:
comparison of integers of different signs: 'int' and 'unsigned int'
if (ctx->oxcf.Mode != new_qc)
~~~~~~~~~~~~~~ ^ ~~~~~~
Change-Id: I5cf81c40b103e688a31e1339511f5c9eb27edd38
1. Skip golden non-zeromv and newmv-last for bsize >= 16x16 if the
temporal variance obtained from choose_partitioning is very low.
2. Skip horz and vert INTRA mode for speed 8.
This change works best on the clips with little noise and with some
motion (e.g. gips_motion which has > 5% speed up). PSNR drop is 1.78%
on rtc test set, no obvious visual quality regression found.
Change-Id: Ib43b5b20e67809d03c5a6890818ddff59e1fc94a
Move initialization of a some new "twopass" values
to the function vp9_init_second_pass() and some other
small changes.
Remove #if GROUP_ADAPTIVE_MAXQ as this is always
enabled now.
Change-Id: I1dbec2fd7c419779848aa987c4cd7824d4df8456
the difference between src and dst will be signed, the error will be
unsigned.
quiets -fsanitize=integer:
unsigned integer overflow: 4294967295 * 4294967295
Change-Id: I580813093ee46284fde7954520dfcb1188f79268
the difference between src and dst will be signed, the error will be
unsigned.
quiets -fsanitize=integer:
unsigned integer overflow: 4294967295 * 4294967295
Change-Id: I502fd707823c4faaa7f587c9cc0312f057e04904
On scene-cut detected frames (i.e., high_source_sad = 1), use
nonrd_pick_partition (over choose_part + select_part), as
the nonrd_pick partitioning is generally better.
Small positive increase in metrics on ytlive set (~0.5 - 1%).
Negligle overall speed decrease, as its only used on scene-cut frames.
Only affects 1 pass vbr mode, speed = 5.
Change-Id: I07c89cbdc75f5bb16eb8e0e2773ead0980d2de5c
This reverts commit be12fefa4b
and commit 057c1c4034.
Also, the mismatch between the avx version and the
c version has been fixed.
BUG=https://bugs.chromium.org/p/webm/issues/detail?id=1168
For a rt encode using 1080p@60fps material, up to 11% performance
improvement overall was seen.
Change-Id: Icd1f216209ebc6fc0b8da885f32f356fa4355ed0
The eob of a block is not perperly set when skip_recode is true,
thus triggering assert(eob <= default_eob) to fail.
Change-Id: Ifecbe33dce2dc4903e0a80bd384dc09bf0dd8a44
Code cleaup, use existing rolling_actual/target metrics instead,
set threshold to get same/similar effect.
Little/no change in metrics on ytlive set.
Change-Id: I74f3c3d0a143a9cf20dc9c3dee54c0f7e6a97a51
Add a max condition and lower the min value.
No change in behavior (metrics for yt live set) for the
default min/max_gf_interval=4/16 settings.
Small positive change when min/max_gf_interval=7/16
(for 60fps clips on ytlive set).
Change-Id: I1c1d72425c86c69419ea43fb9730130e81062f91
add an upper bound to the framerate denominator above which 30fps will
be reported; fixes warning in corrupt / fuzzed files
Change-Id: I46a6a6f34ab756535cd009fe12273d83dcc1e9f1
Provides more comprehensive coverage for --enable-coefficient-checking.
The intent is to make the --enable-coefficient-checking option
consistent with the VP9 spec.
Change-Id: I12d0120756d17572ca2b2d7e6a2ab9d8071d8d58
Error messages:
..\vp9\common\vp9_loopfilter.c(1312): warning C4244: 'function' :
conversion from 'uint64_t' to 'unsigned int', possible loss of data
[.build-x86_64-win64-vs10\vpx.vcxproj]
..\vp9\common\vp9_loopfilter.c(1313): warning C4244: 'function' :
conversion from 'uint64_t' to 'unsigned int', possible loss of data
[.build-x86_64-win64-vs10\vpx.vcxproj]
..\vp9\common\vp9_loopfilter.c(1312): error C2220: warning treated as
error - no 'object' file generated
[.build-x86_64-win64-vs10\vpx.vcxproj]
Change-Id: Ia69260611997cd2ba41c7184a85ecead740a7c07
Increase in the damping used in adjusting the active Q range.
This does hurt rate accuracy a little in a few extreme cases
especially if the clip is very short*, but helps metrics.
* Note that the adjustment is applied at the GF/ARF group level based
on what happened in the last group. Hence for very short clips where
the length of a single group may be a significant % of the clip length
there is still scope for some drift that cannot be accommodated.
In practice most data points in our test sets are now much closer to target
than was previously the case with default settings and in some cases are
better even than they were with the command line undershoot and overshoot
parameter was set very low (e.g. 2%). For example in bridge_close at high rates
the old mechanism was unable to adapt enough to prevent extreme overshoot.
Change-Id: I634f8f0e015b5ee64a9f0ccaa2bcfdbc1d360489
Change to the calculation of the error divisor used in
get_twopass_worst_quality(). This follows on from other
changes to the rate control that impact the output of this
function.
Change-Id: I414fa9aa1e6a68a64dccea17c3712f44b8a0c10c
Changes to the function the redistributes bits from overshoot
or undershoot throughout the rest of the clip to respond more
quickly.
Change-Id: I90f10900cdd82cf2ce1d8da4b6f91eb5934310da
Added a factor based on the bit spend in the last arf group vs the
target to adjust the choice of the active worst quality in subsequent
groups.
Helps clips where previously there was a big overshoot or undershoot
to adapt and get closer to the target rate.
Change-Id: I67034b801679b99024409489a2273ea6fe23b8e6
The use of this value is preventing rate adjustment on clips
or sections that have very little motion but high noise and
this can give rise to some sections with massive overshoot.
Change-Id: I9a65c7c1148dc5d3a7d8b23e50fc1733f3661621
Replaced vpx_d45_predictor_4x4_ssse3(), vpx_d45_predictor_8x8_ssse3()
and vpx_d207_predictor_4x4_ssse3() with
created vpx_d45_predictor_4x4_sse2(), vpx_d45_predictor_8x8_sse2()
and vpx_d207_predictor_4x4_sse2() respectively.
It's mostly neutral or slightly worse than ssse3 in good cases and
better than ssse3 in the bad cases (but still worse than using the mmx
regs).
Change-Id: Ib0237ceb71d2c57b8a93fd3170330cfed9d56bdd
Skip intra-mode and some inter-modes (newmv, nearmv, nearestmv) for
golden frame if the variance got from choose_partitioning is very low.
Only for 1 pass real-time CBR mode and bsize >= 32x32, it has ~2.5%
speed up with less than 0.1% PSNR drop for rtc test set. Don't see
visual regression.
Change-Id: I70efbc95a1007231ae36f02c5b2fbf6cd35077ad
Reduce operations and jumps. perf shows CPU time reduced from 1.9% to
1.6% when decoding fdJc1_IBKJA.248.webm on Xeon E5.
Will apply the changes to vp10 after code review.
Change-Id: I9351509922855d8896ddef1ed093b3ca12619a61
For non-rd pickmode:
best_pred_sad, computed for NEWMV-last, is only used for
skipping golden non-zero modes. Add condition to avoid this
computation if not used (i.e, if golden nonzero modes are not used).
And remove code for computing best_pred_sad for NEWMV-golden,
since that sad is not used.
No change in behavior; small speed gain (~1%) for svc encodes.
Change-Id: Ic2cbdef6c4e9a233a57c0db0eeac8ad5fcead366
convert the random value to int16 before subtracting 256 from it; quiets
a ubsan (sanitize=integer) warning
BUG=webm:1225
Change-Id: Ibc2c5a21f30e112bd6c180f7d6a033327c38d0df
Function level timing test shows about 27% time saving on
a Xeon E5-2680 v2 desktop.
Rename vp9_dct_sse2.c to vp9_dct_intrin_sse2.c for vp9 and
rename dct_sse2.c to dct_intrin_sse2.c for vp10 to avoid
duplicate basenames.
Actually vp9_fwht4x4_mmx/sse2() and vp10_fwht4x4_mmx/sse2()
are identical. TODO: They should be unified later if there is
no intention to keep a duplicate.
Change-Id: I3e537b7bbd9ba417c606cd7c68c4dbbfa583f77d
C does not allow for shifting into the sign bit of a signed
integer, and the two instances here become signed ints via
promotion. Explcitly cast them to unsigned MEM_VALUE_T to
avoid the problem.
BUG=https://bugs.chromium.org/p/chromium/issues/detail?id=614648
Change-Id: I51165361a8c6cbb5c378cf7e4e0f4b80b3ad9a6e
Followed the code style of other lpf fuctions.
These 2 functions put 2 rows of data in a single xmm register,
so they have similar but not identical filter operations,
and cannot share the same macros.
Change-Id: I3bab55a5d1a1232926ac8fd1f03251acc38302bc
- Avoid excessive copying
- Don't both searching if no update can possibly offer savings
- Simplify the interface
- Remove the confusing vp9_cost_upd256 macro
Change-Id: Id9d9676a361fd1203b27e930cd29c23b2813ce59
Apple's version format specification is strictly checked on app
store submission, even for embedded frameworks:
http://apple.co/1WgelY1
The build version number should be a string comprised of
three non-negative, period-separated integers with the
first integer being greater than zero. The string should
only contain numeric (0-9) and period (.) characters.
So that's room for "1.5.0" but not for "1.5.0-906-g656f9c4".
The full version returned from 'version.sh --bare' is now
embedded under a 'VPXFullVersion' custom key in the Info.plist,
so it can still be extracted from the resulting framework.
Change-Id: If34a58d02e407379d1f1859fda533ef7f983170b
vp9_diamond_search_sad_avx was disabled in:
057c1c4 disable vp9_diamond_search_sad_avx
this removes a missing prototype warning as the prototype is no longer
included in vp9_rtcd.h. the file can be restored if someone gets around
to fixing the issue.
BUG=https://bugs.chromium.org/p/webm/issues/detail?id=1168
Change-Id: Ia9fda4b81c53dc5fba7c31d780d761f886940b52
Many codes require -mstackrealign flags. Although -mstackrealign has
been already added to CFLAGS of some modules, SIGSEGV occurs in other
modules than those modules.
The best way may be to find causes and to fix them. However, we
cannot know those causes until SIGSEGV occur really. In addition, if
SIGSEGV occurs in other programs, it will be fatal.
So adding -mstackrealign flags to CFLAGS unconditionally is
reasonable.
Change-Id: I999ef597a6afe97f5e7cc7bffaa866537c3eedd2
This reverts commit 2468163e07.
causes valgrind errors for overread of buffer in SubpelVarianceTest
Change-Id: I448e52c76f815ac199305b71f7d169f2bc167679
Move the logic for rechecking zeromv on denoised block out to simplify
the function. To simplify the param passing, add a new structure
VP9_PICKMODE_CTX_DEN which is only used when denoiser is enabled.
Change-Id: Iaa9b4396dfcb8147236c02d4a1868a09103a4476
This commit clarifies integer value range for vairables used in
several variance functions, also change to use proper type
conversion to reflect the value ranges.
Change-Id: Ic3234b83a912ce1ad12d1b254f3378763e15cc5c
The inlining mirrors what was done with the low bit depth
inter_predictor. And the new highbd_inter_predictor name is more
consistent with other high bit depth functions.
Change-Id: I96437f745759aeec6260c6e39a974bf36f1c211c
Rename and change to how its updated.
Only affects 1 pass vbr.
Small change in metrics (< ~0.1%) on ytlive set.
Change-Id: Ibb1fe485699b6c4a8194951c8f229abe2f64b9a5
Also allows use of --enable-shared when configuring for Mac OS X,
producing a bare .dylib.
Enabling the shared framework bumps the iOS deployment target to 8.0,
the minimum required to support dynamic framework deployment in apps.
When not using --enable-shared, a static library for iOS 6.0+ will still
be built.
Minimum version settings have been moved into ios-version.sh so they
can be updated in a single place.
As with the static build, unless header search paths are manually
tweaked, users must add a VPX prefix on includes, such as:
#include <VPX/vpx/vpx_decoder.h>
A module map for headers is not yet included as inttypes.h is not
modular; this means that VPX cannot be used directly in Swift code,
but can still be pulled in through an Objective-C wrapper.
BUG=https://bugs.chromium.org/p/webm/issues/detail?id=1092
Change-Id: I28fb06ce65e48ed167a88c14a7bfb2861989317e
In motion estimation stage for subpel motion, subpel variance is
computed use bilinear interpolation. The motion vector precision
used is at 1/8 pel and three bits are used to represent the x and y
subpel offsets. Based on this, the half pel check should be against
4, not 8.
Change-Id: I1f56fa1fa3f2f5e19a20d27983efe628557f170e
there are sse2 equivalents which is a reasonable modern baseline
Removed mmx variance functions:
vpx_get_mb_ss_mmx()
vpx_get8x8var_mmx()
vpx_get4x4var_mmx()
vpx_variance4x4_mmx()
vpx_variance8x8_mmx()
vpx_mse16x16_mmx()
vpx_variance16x16_mmx()
vpx_variance16x8_mmx()
vpx_variance8x16_mmx()
Change-Id: Iffaf85344c6676a3dd337c0645a2dd5deb2f86a1
Added actual and absolute rate miss values to the opsnr.stt
stats output line.
Changes to the borg graphing may be needed before merge.
Change-Id: I1e9d548ce445d29002f0c59ebfd3957a6f15e702
Bug found by Yunqing relating to the correction for size at 8K and
above in get_twopass_worst_quality().
The basis for the correction was changed to the linear size relative to
1080P as a baseline and the adjustment has been clamped to prevent
problems at extreme images sizes.
For 1080P the results on our test sets were neutral but the low res and
mid res sets saw a small gain (0.1%-0.2% average).
I would also expect some gains on 4k and larger content where the
previous correction was overly aggressive.
Change-Id: I30b026b5f4535e9601e3178d738066459d19c8fb
Add control API VP9E_SET_TARGET_LEVEL that allows the encoder to
control the output bitstream level and/or keep level related
statistics.
Usage:
255 do not care about level (default)
0 keep level related stats only
10 target for level 1
11 target for level 1.1
.
.
.
62 target for level 6.2
Usage for vpxenc:
--target-level=0/255/10/11...
Change-Id: I31d1aeca19358b893e7577b4e63748c8e614034a
For at least some of the implementations of sdx8f, such as
vpx_sad4x4x8_sse4_1, aligned moves are used to move the results into the
array.
Change-Id: I83df5a8e657b44e906d0d8b0bc154f1e5660f7f9
block_variance: This operates on 8x8s and would be safe with a int32 *
int32 to uint32 multiply, but this is potentially unsafe for 12-bit
input. Unfortunately the code already segfaults on 12-bit input:
https://bugs.chromium.org/p/webm/issues/detail?id=1223
calculate_variance: This operates on up to a 32x32 of 8x8s and can
overflow even with 8-bit input (log2((256*32*32)**2) == 36).
BUG=https://bugs.chromium.org/p/webm/issues/detail?id=1220
Change-Id: I1ca4ff6092db9a7580da371ee9a21f403fdadc40
Reduce factor for setting base-qp for active_best_quality (for inter-frames).
Small increase in metrics on yt live set.
Change-Id: I9cf0ac797783aeddbfaf1ff510696c9035d7c5ee
This change makes the c match the assembly and removes the todo's
associated with getting this to work.
Change-Id: Ie32e9ebb584a9d60399662d8bcb71b74fbd19d1e
These implementations rely on casting the pointers to load the data.
Clang implemented optimizations which automatically add alignment hints
to such loads. The 4x4 filters do not guarantee the necessary alignment
so the resulting assembly is broken.
https://llvm.org/bugs/show_bug.cgi?id=24421
BUG=webm:817
BUG=webm:892
Change-Id: I608885299f1f86ff83653b65e0e40d0ae87fb3fe
* changes:
vp9_frame_scale_ssse3.c: make 2 functions static
vp9_pickmode.c: make function static
vp9_noise_estimate.c: make function static
vp9_aq_360.c: add missing include
vp9_idct_intrin_sse2: add missing vp9_rtcd.h include
vpx_dsp/*.[hc]: add missing vpx_dsp_rtcd.h include
Makes the delta-qp stop little earlier on areas that have been refreshed enough.
This helps to reduce some pulsing artifact on noisy flat areas observed in some
noisy vc-clips.
Threshold changes only take effect for sources where noise level is estimated to
be >= medium level.
Only affects 1 pass CBR, non-screen content case.
Change-Id: Iacf557f6aa8abbcd6782c02ff2e6c14891960850
For 1 pass vbr mode:
Refactor to move the logic for gf setting based on up-coming
key frames to a separate function, so same logic can be used for
scene-cuts/changes.
Change-Id: Ic4ede308e08ba869bb62e4566e19ea31222c5229
Makes the noise estimation react little faster.
Little/no change in metrics.
Change only affects 1 pass cbr.
Change-Id: I13f0daa90ecbf9d49eb1cf2e48febd9d92292940
When building a dynamic framework with Swift compatibility, can't
include any headers that aren't in another module or you get an
error like this from Xcode on the including project:
Include of non-modular header inside framework
For some reason the system inttypes.h is not in a module, unlike
other standard C library headers... but it doesn't seem to be
actually needed on Darwin, so removing it doesn't appear to
be a problem.
Change-Id: I11d264483c54feefd9d2edf573afaef34ddcd0f2
When using git submodules, .git may be a file instead of a directory.
The -d test was failing in that case; switched to -e.
BUG=https://bugs.chromium.org/p/webm/issues/detail?id=1215
Change-Id: Iedf0e92bfeb003b28a415945dc729e6ce58c4fe4
"qc" in vp{9,10}_token_state is used to save quantized coefficients, this
commit changes the type from short to tran_low_t to properly reflect
the value range for highbitdepth build.
This fixes an out-of-range bug when optimize_b is used in highbitdepth
build.
Change-Id: Ibf330879e6ac6ae8f099e085caa9d3d9a889fde8
This is an actual overflow where the result of the calculation is
materially changed, not just a negative value that is stored in an
unsigned.
Caught with fsanitize=integer on the VP9/AqSegmentTest.TestNoMisMatchAQ2/1 test.
Change-Id: I514b0ef4ae7ad50e3e08c0079aa204d59fa679aa
In so doing this fixes a couple of bugs:
vpx_plane_add_noise.c needed to subtract a clamp instead of add.
And the assembly (mmx sse) had assumptions that parameters were
continuous in memory which was not true.
Change-Id: I76f2c43cf54bfc838eb2edf8a443eaaa7565d7b5
- iOS SDKs no longer ship with armv6 support.
- Our minimum iOS version means all target devices have neon.
- Remove armv6 darwin LD workaround.
- This removes a TODO.
Change-Id: I2fcb5b82c96213364275475be021c7dd8459d5c0
Move skin superblock force split out of this function as well
as some minor code refactors. Checked bitexact for different speed
settings and different resolutions.
Change-Id: I6078cbe88dd9ce6c0b69470a8a0a8f8d2274161b
this avoids the decoder test which was only correct for vp9, vp10 was
missed in the earlier change
Change-Id: Ib789c906d440c0e4169052cf64c74d5e4b196caa
First, we only set use_4x4_partition for key frame where we don't
denoise; second, envision we have small partitions, we should pass the
actual block size to denoiser and make an early termination if needed.
Change-Id: I331f42046d792b17360723d17ff817d601394658
Wrap around behavior is enforced manually and we use the values in
arithmetic involving negative integers.
Change-Id: I199706b6f3af91f4fb6fe2ef302fbbc6d0cf5785
The product always fits in uint32_t, but the operands don't.
An optimizing compiler should generate the wraparound code.
(Verified with clang).
Change-Id: I25eb64df99152992bc898b8ccbb01d55c8d16e3c
ADL will look this up from the callsite namespace iff it is declared
before the callsite or from the parent namespace of the class type (the
global namespace).
This patch has been tested on MSVS 2015 and clang-3.8.
Change-Id: I00ba74712c9b617b9d81761abed1e14d8f25d8e3
Block size passed into denoiser filter is always >= BLOCK_8X8 (in
vp9_pick_inter_mode), it is not necessary to check smaller block
size. Passed the bitexact test on clips with different resolutions and
noise levels.
Change-Id: I19fa3195d18c27d9e5de60dc11cff1522ef3714e
Fix will reset the consec_zero_mv map on non-skipped blocks with non-zero mv.
Adjust thresholds on consec_zero_mv in noise estimation and skin detection,
as more possible reset on map means lower thresholds should be used.
Change-Id: Ibe8520057472b3609585260b51b6f95a38fb777d
webm_read_frame is the only function now which requires
documentation for what the return value means (other two are quite
obvious - file_is_webm and webm_guess_framerate).
Change-Id: I7a4f7d8097b1d748812b2ee251ee718a0b5ce836
In VP9 internal denoiser, motion magnitude is computed from
best_sse_mv, which should be set to 0 at the begining. This bug may
cause visual aritifact in denoiser. Also, delete two improper comments.
Change-Id: I8710d2acba23320bc85cf72af17d65245c19438b
Need to check that sse for non-zero mv has been set for the current block
(i.e., check that nonzero-mv is tested as a mode, so newmv_sse != UINT_MAX)
before forcing to not use zero-mv for denoising.
Also increase some thresholds (sse and sse_diff) for high noise case,
and use shift operaton instead of multiplication on a threshold computation.
Change-Id: Iae7339475d57240316b7fa8b887c4ee3c0d0dbec
Resolved two TODO items.
Force a minimum value of 1.0 for frame duration as per section duration.
Column inactive zone is currently set to 0 as most of the serious issues
relating to inactive regions relate to letter boxing.
Change-Id: Ifbab3acf2c089d7305620a7ff7ed7c3536cc9235
In Aq mode 1 the segment and AQ delta for each block is based
on spatial variance. There may be a net imbalance between blocks
that have lower Q than the baseline value and those that have higher Q.
This patch monitors that imbalance and extends the allowed baseline
Q range for the frame to accommodate adjustment of that baseline value
to compensate.
Change-Id: Iae8a48c7c01fe2af94a141e149d03acf467237ca
So it can be used even with aq-mode=3 not enabled.
Also cleans up some code in the places where its used.
No change in behavior.
Change-Id: Ib6b265308dbd483f691200da9a0be4da4b380dbc
Removed this todo because of another todo which says none of this code
should exist. It should be integrated into the block by block encode
process as per the decoder.
Change-Id: I076bd15140a060e69c014dd7d7cd07fea260aba3
For 1 pass vbr mode.
Increase the gf interval for case where average Q is close to
max and high overshoot is detected.
Small increase in overall avg_psnr/sssim metrics (~0.2/0.1%) for ytlive,
but improves the low-end (low bitrate) for several clips (less overshoot).
Change-Id: Ifba40f25b4861b2e0d9832c82d5359a6a3dce9f2
More even spacing near key frame and avoid gf on scene cut
if its close to key frame.
Small increase in metrics for ytlive set (which uses key-period=150).
(~0.2% gain)
Change only affects 1 pass vbr mode.
Change-Id: If1e5a59baf1e0befbaf998522fbc47d94ac5b5df
Change only affects 1 pass vbr.
Use a q value somewhat larger (~6%) than avg_frame_qindex[INTER]
as basis for active_best_quality for inter-frames.
And use the minium of this (avg_frame_qindex) and the active_worst_quality.
This reduces some overshoot in ytlive clips.
Overall small but positive average increase in metrics (up on average ~0.2%).
Change-Id: Icdbaae7872d5675fd38a13c0ec6ce0e2e3b919ce
This was never hooked up for the 32x32_34 case as the neon_asm version
in 3f7c12da, when the intrinsics version was added.
Change-Id: Ic7db4ce5850c637315f9fe9e2de93a4f8cf9e320
Change recursive weight for average_source_sad and
put some constraint on spacing between detected scene-cuts.
Change only affects 1 pass real-time mode.
Change-Id: I1917e748d845e244812d11aec2a9d755372ec182
Correct the setting of Q basis of GF/ARF in 1 pass vbr.
Existing logic would switch to using avg_QP of key frame if
avg_QP of inter is less than active worst (even if key frame is
not last frame).
Instead fix the logic (as per the comment) to use the lower of
active_worst_quality and avg_Q for inter as basis for GF/ARF
active_best_quality (unless last frame was key frame).
Increase in metrics: AvgPSNR/SSIM up by ~0.7/0.3 on ytlive set.
Change-Id: I9a628378ec6684bfda9457ebfc2384ef6d8579f7
Adjustment to stop excessive prediction decay triggered by blocks
or frames with extremely low spatial complexity which rendered the
comparison of intra and inter coded errors meaningless.
This was causing much shorter than expected groups on some 4k
test content.
Change-Id: I3f2c64200ef6dcef4721fc9f2ec09e480056ffc2
Uses a metric on fraction of smooth blocks derived from first pass
stats in a frame to adjust down the cq_level modestly in the cq mode.
The current implementation does not add much complexity, and is
fairly light in the adaptation.
Change-Id: Ic484e810d5bd51b7bb6b8945f378c7c3d9d27053
Adjust the motion decay component to account for image size.
This has very little impact for smaller image sizes.
Average bdrate results for our HD test sets:-
Hdres set: opsnr +0,92%, Fast SSIM +1.6%
Netflix hd set: opsnr + 1.5%, Fast SSIM +3.1%
There are a couple of notable -ve clips such as cyclist and sunflower
which seem to be better with a shorter interval but also a few very big
wins such as Jets >12% psnr 22% Fast SSIM and from the Netflix
Netflix set PierSeaside 9.7% psnr and 18.2% Fast SSIM.
Change-Id: Ie43aaedaa74331ed83d624a13548094ac64fed9e
Change only affects 1 pass vbr mode, speed >=5.
Increase min_thresh, decrease boost, and set a min/max
value for gf_interval.
Change-Id: I9c1e1a1ab0c5780064eb62714ee39a72ea4d2107
Trap the case where we end up with a very short arf group just before
a key frame. Such a group often has poor quality and may cause pulsing.
For example if the KF is 17 frames away we are better doing two mid-size
groups of 9 and 8 than a group of 15 followed by a group of 2.
This becomes more and more important when coding with a short forced
kf interval though it may not impact our standard tests much.
Change-Id: I29d83d6637b203eac69be320dd35a7401a4678c1
This reverts commit 74aaa2389e. Unstable
under valgrind because of uninitialized reads. Limiting the bad bisect range.
Change-Id: I45b32f0ee0ba45795e7efb9947fb805830c8ce0e
- Use arithmetic AND (&) instead of logical AND (&&) to
generate correct testing input.
- Fix variance reference function to be consistent with
our codebase implementation.
- Refer to the following issue:
https://bugs.chromium.org/p/webm/issues/detail?id=1166
Change-Id: I8c1ebb03e22dc9e1dcd96bdf935fc126cee71307
Avoid copy-block when denoising is at LowLow level (i.e., no denoising is done).
Instead, don't enter denoiser at all, and when level goes back up over kLowLow
do a reset in denoiser.
Change-Id: I0544adf58f4dd51ecc4a4607fcb0353bfbbb7a59
only output[0] needs to be set, store_output is more involved than a
movdqa in the high bitdepth case
Change-Id: I2cbd85d7cf74688bdf47eb767934fe42e02bff67
Avoid doing the mcomp in denoiser if we don't denoise the
block (because of motion/SSE/skin threshold, etc).
This can reduce encoding time (with denoiser enabled) by ~1.5-2%.
Change-Id: Ia699b68dfd37b89cdf3a82b8aa40e8c8f98a3d4f
This make it more likely clean/low-noise content will
be set as LowLow, and hence no denoising will be done.
Also set early exit on denoising for small blocks.
Change-Id: I4a72bba3e6c5e2d523d304c39deacc9c39bf216c
Some cleanup and bugfix: pass mi_row/mi_col (not mv_col/mv_row)
to build_inter_predictors. This only affects case where
the frame is resized, but since denoising is not done on resized
frames, the fix has not effect currently.
Change-Id: I36617a7f0b43b6f49976745f15d400977e6ffa46
Switch to use new skin model.
And fix condition for denoising skin block.
Previous condition did not denoise skin blocks if the selected
mode was non-zero motion in current frame. Modify condition to
also force no denoising if that mode was not selected as zero motion
now and for at least "x" past frames in a row (x = 2).
Change-Id: I00753e3fe45b9a308a7ef43c58f11868e3bfc6b0
not strictly necessary, but allows projects using '-Wconversion
-Wno-sign-conversion' to reuse these headers.
Change-Id: Id1398d726c90173ccba9aea66798fcef6f20fa23
Change only affects 1 pass, vbr, speed = 5 (real-time mode).
Some improvement for high motion content.
AvgPSNR/SSIM metrics for ytlive set all up, on average ~2%,
some clips (high motion ones) up 4/5%.
Encoder speed down: on mynintendo_x1.1280_720.y4m: 47fps -> 44fps.
Change-Id: I9e3eaa6392dcb6b5b44ee6f43004f97ba859bc11
the vpx_decoder layer guarantees that when called directly this won't
receive NULL data and the reuse via decode() is protected by a NULL data
check and 0 size check (NULL data and non-zero data size is protected by
the vpx_decoder layer).
Change-Id: I7437fb5ca4e4aa431963d55b909d4d920f339be3
The mv is clamped in dec_find_mv_refs() to a smaller region
than the clamp in dec_find_best_ref_mvs(). See clamp_mv_ref
and clamp_mv2.
Change-Id: I47dd5f7fa8b42f2cc593559b4d7c782fe7bcb1db
In multi-thread case, the encoder may crash if using encoder option
tile-rows > 0. To prevent that, force tile-rows=0 in this situation.
This is a workaround for WebM issue 1095:
https://bugs.chromium.org/p/webm/issues/detail?id=1095
The further fix can be done by adding synchronizations after a tile
row is encoded. But this will hurt multi-threaded encoder performance.
So, it is recommended to use tile-rows=0 while encoding with threads
> 1.
Change-Id: I656cbcc200f8d0410d09530e7981ad8f32fe7bc9
This patch was to fix a reported Hangouts deadlock/freezing issue
in VP8 encoder(issue 27232610). The original encoder loopfilter
synchronization happened in the following frame, which was prone
to causing problems in some complex use cases. This patch simplified
the synchronization logic.
More testing needs to be done.
Change-Id: I38fd3f35d11f98fae1e44546aa5e4c6d6e19c4be
Allow the encode loop to select from a wider range of Q values
when encoding normal (non arf or kf) frames.
This change is targeted at improving psycho-visual quality in some
easy sections that are currently not getting enough bits.
This is likely to be a little worse from a metrics perspective and may also
have a small impact on encode speed in cases where extra recode
iterations are triggered.
Change-Id: I667eebf33c753bcbcf8b93596467369e5708b889
Adds a second threshold for recodes even on frames where
recode is normally disabled if there is a big rate miss.
Change-Id: Ifd4a34707da55ec15eb7cfb87de4644b8d76deb2
Fix the threshold for forcing refresh of golden frame based
on high motion. The current comparison was incorrect and
prevented this (force update of gf on high motion) from being used.
For now keep this logic under a flag (and off for now) so as to
not change behavior, until further testing.
Change-Id: Ib5f0082159a428b0603b9534e4bcb6f83e4ccb25
+5.857% BD-RATE on SCREEN_CONTENT
Leaving this off for non-screen content because:
+25.300% on TWITCH120
+37.833% BD-RATE on RTC
Change-Id: Ie0a312182d6cc859fb04298e4cd81d02b39e23fe
For 1 pass vbr mode: Increase the period of gf update on scene
cut (keep it same as orginal/default setting for now).
Change-Id: I679c3bd21152f6c4e486c8098d931c00e1d26b5f
This is the identical change submitted for vp8 here:
https://chromium-review.googlesource.com/#/c/274107/
Tested this change on Mac OSX (10.10) and Linux
(Linux Mint 17 / Ubuntu 14.04) and in both cases:
- downloaded and compiled latest source for libvpx and ffmpeg
- confirmed ffmpeg would build sub-second frame rate webm files
via the previous patch
- confirmed ffmpeg would *not* build fps < 1 for vp9
- made this change, recompiled libvpn and ffmpeg
- confirmed ffmpeg would now create the same webm with
fps < 1
- confirmed the resulting file would play and was vp9 (e.g.
would not play in Firefox (Linux version complained it was
VP9 but mostly could play it) or older vlc, etc., but does
play just fine in Google Chrome and a newer version of vlc.
Sorry I didn't catch this last time - but this seems a solid
change and it's handy to be able to create frame rates
less than one second.
-jk
Change-Id: I38fa32148de8c4c359f228cf08b9a4b83b5a52fb
The change https://chromium-review.googlesource.com/#/c/329181/
also changed behavior for cbr mode, which causes some regression
in screenshare test in webrtc.
Resetting the specific change to leave the cbr behavior
unchanged for now.
Change-Id: I52df158806422f86398e1d2f522e92067d8325eb
Some adjustments to inter-mode selection for vbr mode.
Condition some of the bias to low/zero motion on cbr mode, and
don't use int_pro_motion_estimation for golden ref
(treat it same as last ref).
Change only affect 1 pass vbr mode, speed >=5 (non-rd pickmode).
Encoding time increase within ~5%.
Avg PSNR/SSIM on RTC set increase by ~2%, all clips up,
ranging from 0.5 to 4%.
Change-Id: I0048d0104a8816773d91a2b1484d601169d9bad7
Don't advance the svc frame counters on dropped frame,
since this can break the referencing scheme and lead
to a crash/assert.
Updated svc-datarate unittest to add a lower bitrate test.
Change only affects 1 pass cbr svc, with frame dropper enabled.
Change-Id: Ibb7530b7a587a9344d46898d9286fd9e2ef0779c
Use the superframe counter to set the key frame, and force
it to the key frame on base spatial layer only.
Also, update svc frame counters under frame dropping.
Update unittest: add specific tests with short key frame period.
https://bugs.chromium.org/p/webm/issues/detail?id=1150
Change-Id: I5b1c9a09253e6e5fbfce51b4cf603ae22d422b01
For 1 pass cbr mode: allow for two-stage 1:2 scaling
(which will use the 1:2 optimized scaler) if the spatial
layer is 1/4x1/4 of souce.
Without this change, the base layer for 3 spatial layers would
be using the non-normative scaler which is un-optimized/C code.
Change-Id: I9d73f92a4a96927d0f1d6bf75315c1e60513226a
Use sharp filter to generate motion compensated reference for
temporal filtering. It improves the average coding performance of
VP9 speed 0:
derf 0.34%
hevcmr 0.38%
stdhd 0.58%
Change-Id: I1772a051be545de8c343055274e5ca0929d19cda
This commit back ports the fix from
https://chromium-review.googlesource.com/#/c/326940
It corrects the block partition context fetching in rate-distortion
optimization. It improves the average coding performance of speed 0:
derf 0.098%
hevcmr 0.102%
stdhd 0.282%
Change-Id: I8bcc6fe40ba5c6b50a6136daac116dcc738937ec
The double pointer in xd->mi handles this for us.
Cuts encode_suberblock()'s self time in half at rt speed 8.
Change-Id: I820dae24efdbf9a140bbeae82e4e2a5850317766
* changes:
x86/convolve.h: remove redundant check in FUN_CONV_2D
x86/convolve.h: replace while w/if for w < 16
x86/convolve.h: change filter[] || chains to |
restore the value for VP9 to 9999 to satisfy the current test
expectations; without this
VP9/DatarateTestVP9Large.ChangingDropFrameThresh/8 will overshoot.
Change-Id: I88dad574ae4ab10f923579824c7347ff468c7045
This reverts commit f51f0998e1.
This causes datarate tests to fail. Some are due to the new default
keyframe distance, another causes an assert even forcing 9999:
[ RUN ] VP9/DatarateOnePassCbrSvc.OnePassCbrSvc3SpatialLayers/0
test_libvpx:
vpx_dsp/x86/vpx_subpixel_8t_intrin_ssse3.c:853: scaledconvolve2d:
Assertion `y_step_q4 <= 32' failed.
Change-Id: I4ee4fea97f47e4f1a23b82a62e6afc6280961e38
Reset the scale factors before build_inter_predictors.
Add datarate tests for 3 spatial layers, which exposed this issue.
Change-Id: I7f81efbe44345ecea9fdd5f639a4cca76aed3874
For 1 pass cbr mode: allow for two-stage 1:2 scaling
(which will use the 1:2 optimized scaler) if the spatial
layer is 1/4x1/4 of souce.
Without this change, the base layer for 3 spatial layers would
be using the non-normative scaler which is un-optimized/C code.
Change-Id: Ifcf526ec2aaf3e5fa7924588d9dd8660bf02fb46
some configurations may fail if AltRefTest is undefined though
VP8_INSTANTIATE_TEST_CASE is defined away.
Change-Id: I7272775a506718336bd6cee2225cf83bd72fede5
the same as vp8, with the same reasoning from:
2a0d7b1 Reduce the default kf_max_dist to 128.
see also:
https://trac.ffmpeg.org/ticket/4904https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=815673
+ restore vpxenc behavior of taking the library default rather than
forcing 5s
This change also exposes an issue with one-pass svc in cbr mode, keep
the old default in datarate_test.cc for now.
Change-Id: Id6d1244f42490b06fefc1a7b4e12a423a1f83e88
* changes:
x86inc.asm: only set visibility for chromium builds
Only use .text sections for aout
Use .text instead of .rodata on macho
Copy PIC handling code from x86_abi_support
Set 'private_extern' visibility for macho targets
Expand PIC default to macho64 and respect CONFIG_PIC from libvpx
Use libvpx defines to set name mangling rules
Customize x86inc.asm for libvpx
Update x86inc.asm from x264
Use the existing scene/content change detection to better
update/adjust golden frame refresh.
Change only affects 1 pass real-time vbr mode, speed >=5.
Change-Id: I2963a5bb7ca4a19f8cf8511b0a925e502f60e014
this restores the previous version's behavior avoiding issues with
builds that may split sources on directory boundaries; protected
visibility may work in this case.
Change-Id: Ie759bd96c9ea5b45613f450dffa6e67eb45f5a8b
The read only sections are getting stripped on some OS X builds. As a
result, random data is used in place of the intended tables.
Change-Id: I4629c90d9e0ae4d4efc193a93be6fb93809ae895
Don't initialize first pass costs for a number of symbols where first
pass probabilities aren't initialized.
This brings a 1.22x first pass speedup.
https://bugs.chromium.org/p/webm/issues/detail?id=1089
Change-Id: I97438c357bd88f52f5a15c697031cf0c3cc8f510
replace with vpx_highbd_lpf_horizontal_edge_16 and
vpx_highbd_lpf_horizontal_edge_8 to avoid passing a count parameter
Change-Id: I551f8cec0fce57032cb2652584bb802e2248644d
replace with vpx_lpf_horizontal_edge_16 and vpx_lpf_horizontal_edge_8 to
avoid passing a count parameter
Change-Id: I848c95c02a3c6ebaa6c2bdf0983dce05cd645271
move to encoder_encode() as vp10_get_compressed_data() allocates data and
would require some modification to make its error return meaningful.
Change-Id: Ia5267c35d16ccd42b6da6d2136402b13e28f9159
move to encoder_encode() as vp9_get_compressed_data() allocates data and
would require some modification to make its error return meaningful.
Change-Id: I8ddc390a1441afd0ff937842fa4ad1053c956133
Add frame-level condition for reference masking: under external or
internal dynamic resize, allow for reference masking if none of
the references have been scaled.
Peviously, reference masking was turned off for the stream if dynamic
resize feature was enabled or an external resize event occurred.
reference_masking gives speed up with little/no loss in compression.
For speed 7 on rtc set: encoding time decreases by about 5-7%,
avgPSNR/SSIM goes down ~0.2%.
Change-Id: Ie4444577451ef954414d8fb4b2c99d65cadf1746
This commit fixes issue 1141. The issue was triggered in multi-tile
encoding. The change properly saves and restores the block context
information in the real-time mode selection process. It removes
several redundant memcpy operations in sub8x8 intra block mode search.
Change-Id: I35c9ad197f4bd500ec39b5fc833f052f19eee010
External dynamic resize with swapping width and height was
not handled properly.
Fix is to re-init loop-filter under certain condtions.
Modify unittest to test this case.
Without this change test will fail.
Relates to: https://bugs.chromium.org/p/webm/issues/detail?id=1140
Change-Id: I7d81ca7fe0783b3bc103a52a7b7cf073a96be26e
allocations done within this function are protected with
vpx_internal_error; adding the setjmp fixes a crash in
vp10_lookahead_push() under low memory conditions.
Change-Id: I5515017cd71b218840c506791b3a517da7ffc93e
allocations done within this function are protected with
vpx_internal_error; adding the setjmp fixes a crash in
vp9_lookahead_push() under low memory conditions.
Change-Id: I4b79dca37cc7fadc4b7633f0db44c0e406799bc6
An issue exists with reference_masking in non-rd pickmode for spatial
scaling. It was kept off for internal dynamic resizing and svc, this
change is to keep it off also for external dynamic resizing.
Update to external resize test, and update TODO to re-enable this
at frame level when references have same scale as source.
Change-Id: If880a643572127def703ee5b2d16fd41bdbf256c
For dynamic resizing (whether the new codec size is determined internally
or externally set by user), we should for now keep rc.resize_allowed enabled.
This prevent the use of referene_masking for real-time mode
(in set_rt_speed_feature()).
Change-Id: Ibb7c3ff35be88afdf1a3c6db6693521766f177a3
to vp9_setup_pre_planes(), preventing the function
unscaled_value() from being called. unscaled_value()
returns the same value that was passed in. See
scaled_buffer_offset() in vp9_reconinter.h.
Change-Id: I2a6fbaf07972c2f212834929d29a2cbe72e399c3
The bit to error transformation got doubled as a result of going from
8-bit to 9-bit costs (change d13385c).
Use defines to derive the scale numbers and comment some of the fields.
derf: -0.023 BDRATE
hevcmr: +0.067 BDRATE
stdhd: +0.098 BDRATE
(These are substantially smaller than than the original gains from 8 to
9 bit costing.)
Change-Id: I6a2b3b029b2f1415e4f90a05709b2333ec0eea9b
When the codec frame size is the same as the reference frame size,
release the scaled reference before assigning it a new buf_idx.
Only affects 1 pass non-svc mode, where the scaled references are
release only under certain conditions (to prevent un-needed scaling
of the references every frame).
Modified a unittest that can trigger this bug without this change.
https://code.google.com/p/chromium/issues/detail?id=582598
Change-Id: I9a884e36ebd7608b1641ec2a469e20a4f829cf43
If the application changes frame size (external size changes),
and aq-mode=3 is on, reset the cyclic refresh.
Modify the TestExternalResize unittest (longer run with more resize
actions). Without this change an assert would be triggered on this
longer test.
Change-Id: I0eefd2cd7ffa0c557cca96ae30d607034a2599ce
Fixes an issue where the tx_type was not set correctly for
sub8x8 inter and intra blocks. In the current syntax, for
sub8x8 blocks, there is still a single tx_type that is
transmitted. Ideally, this should be searched for the best
rd performance, albeit at the expense of encode speed.
For now, we just set it to DCT_DCT. Previously it was left
incorrectly as what was used for the previous non sub8x8
block.
derflr: BDRATE -0.277%
Change-Id: If76ba903bfbfd4d374cf1ac7d1daee50e92f0edd
Make this consistent with regular block size rate-distortion
optimization. It improves the compression performance:
derf 0.055%
hevcmr 0.129%
Change-Id: I112fe734f592c21bc7aa6efb7e3f269c4214ee7b
For 1 pass real-time mode. No change in behavior as only last
and golden are used as references in 1 pass real-time mode.
Change-Id: Ie4655014eee1a8b271542f29d74b2c6f7fed54c9
the results along the top and left border are then stored with a moving
window into the vector.
~40-67% faster on ARM, ~40-77+% on x86 depending on the block size.
Change-Id: Iab369aa2946a3ae4eb7290d512868fe5db92dbc8
delete apply_cyclic_refresh_bitrate(). unused since:
3472cbb vp9 aq-mode=3: Keep it on even at low bitrates.
Change-Id: I0fac9a31b59504e31000ac3a8f0b68e8d4320113
The definition is for the number of frames to check to determine the
recent decay rate, further to determine the next key frame in the
first pass of the encoder.
Change-Id: Ic696d6eb518a86fa296842273cf8767ef0b0e27a
when INLINE is defined and mips is not being targeted. otherwise keep
the old --enable-extra-warnings behavior
Change-Id: Iba576edbe5fca03efa56ce99eee11f9cafc573ad
-use larger threshold on y (as in vp8).
-add distance threshold for each cluster
-use larger skin distance threshold for first cluster
-add some early exist checks.
Keep default setting to model=0.
Change-Id: I1044b99ade4bb1f215a860a019a4d84cee2f7715
It improves the compression performance of VP9 by 0.1% across all
test sets. No speed change is observed.
Change-Id: I59338c5c9e67bae22188f35fc3afbfe2a6bba6b0
The postproc vp9_denoise() is a spatial denoise/blur function.
It was not intended to be used if temporal denoising is enabled.
Change-Id: I97d2dcb941e7cc49bbafce99d9286beb2693249d
Put check to avoid possible out of bounds when looping
over the blocks to estimate noise level.
No change in behavior.
Change-Id: I4b7b19b7edee0ae1c35b9dc0700b1bf9b304d7f5
* changes:
configure: extend armv7 hf target autodetect
configure: remove default CROSS for arm targets
configure: avoid default when CROSS is set to null
This commit changes SSSE3 optimized idct8x8 functions to work with
highbitdepth build.
With this commit and the previous one that enabled SSSE3 idct32x32
functions, tests showed virtually no difference on decoding speed for
file fdJc1_IBKJA.248.webm for the build with -enable-vp9-highbitdpeth
option and the build without the option.
Change-Id: Ibe0634149ec70e8b921e6b30171664b8690a9c45
This commit changes the SSSE3 assembly functions for idct32x32 to
support highbitdepth build.
On test clip fdJc1_IBKJA.248.webm, this cuts the speed difference
between hbd and lbd build from between 3-4% to 1-2%.
Change-Id: Ic3390e0113bc1ca5bba8ec80d1795ad31b484fca
the lookahead buffer allocation is deferred to receipt of the first
frame to allow profile changes. if the encoder was flushed before
supplying any frames the encoder would crash trying to dereference the
NULL buffer. vp8 is unaffected.
fixes mozilla bug:
https://bugzilla.mozilla.org/show_bug.cgi?id=1237848
Change-Id: Icee4b64de760476eee0d33b568f0a1010335ff13
Use multiple clusters instead of one and decrease
the distance thresholds.
Add a define to switch between models.
Default is set to existing (1 cluster) model.
Change-Id: I802cd9bb565437ae8983ef39453939f5d5073bb1
If a superblock contains alot of "skin" then force split
of 64x64 partition, and make some adjustments in mode selection.
This helps to reduce artifacts on moving face/skin areas at low bitrates.
Little/no change in metrics: avgPSNR/SSIM down by ~0.12%.
Small encoding time increase < 1%.
Change-Id: Ic57f52148c3716f391419fab0530d916e4c1d186
For aqmode=3, golden period update is set based on period of cyclic refresh.
Put a limit on max golden period update, for now set to 40.
And fix comment.
Change-Id: Icb61dd87c796cce2a5f5f7331c6a129540994696
Limit oscilation detection in the case where overshoot is very very
large.
This keeps the 9-bit cost patch from breaking the DownUp reisze test.
The patch pushed us to an 11% undershoot right before a scene cut
causing a 1200% overshoot. (Whereas before we were undershooting by
only 6% before overshooting by 1200%).
Change-Id: Id90ccfab8aba872ccadc45b73b3bb097b895677f
In inter mode search skip all modes except NEARESTMV and DC_PRED.
10% less encode latency for large frames using the chromium remoting_perftests.
+0.313% BDRATE on the screencast set at speed -6.
Change-Id: Ib97a39dd8bcdeab545509e0e02d78ce7033f8c63
Remove comment(s) and enable frame-dropper for tests.
Frame dropper for 1 pass svc was fixed a while ago:
https://chromium-review.googlesource.com/#/c/309230/
Change-Id: I5fd3192825b22e562db9210d3dc7b246a1799d8d
Make it consistent with the comment/intended behavior,
that is, only denoise if current block is zero_mv.
Change-Id: I3909761e802e80089752a493ab3646dc32698ded
Changes to mode selection for 1 pass SVC mode:
use base layer motion vector, changes to intra-prediction.
Change-Id: I3e883aa04db521cfa026a0b12c9478ea35a344c9
This patch fixes a bug that causes the loop filter search to reset to
a low value or zero after each arf overlay frame. We expect the overlay
frames to need little or no loop filtering but this should not propagate.
Change-Id: I895b28474cf200f20d82793f3de40b60b19579fd
This is a pure-refactor in preparation to potentially raise the bit-cost
resolution.
Verified at good speed 0 and rt speed -6.
Change-Id: I5347e6e8c28a9ad9dd0aae1d76a3d0f3c2335bb9
More aggresive on avoiding denoising on skin.
May supplement this later by adding condtion onn consec_zeromv.
Change-Id: Ied92b332f9b24e821d2009f81d1565758588d9a5
Different quality levels are used for different regions in
the frame depending on how far they are vertically from the
center. Specifically, three segments are used based on the
mi_row index with respect number to the number of mi_rows in
the frame.
Change-Id: Ifc8b777bc58ea8521dffc4640360c67d99f8d381
This reverts commit ea48370a50, reversing
changes made to 15939cb2d7.
The commit was insufficiently tested and causes failures.
Change-Id: I623d6fc2cd3ae6fd42d0abab1f8eada465ae57a7
This commit adds the logic for segmentation map initialization and
disable temporal update of segmentation map when error-resilient
mode is on. It fixes the enc/dec mistmates (release build) and
assertions(debug) when both aq-mode and error-resilient are on.
Change-Id: Id2155e8b28962cf1f64494f4df0c8d79499b6890
Prior to this patch, read_inter_block_mode_info() would
find the nearmv and nearestmv for all modes. Now it does not
search for ZEROMV modes and breaks out early for NEARMV and
NEWMV modes.
Change-Id: Ifa7b1eaf58bb03b9c7792ea5012fef477527d0fd
There are flaws in current implementation of VP8 multithreading encoder
and decoder as reported in the following issue:
https://code.google.com/p/chromium/issues/detail?id=158922
Although the data race warnings are harmless, and wouldn't cause real
problems while encoding and decoding videos, it is better to fix the
warnings so that VP8 code could pass the TSan test.
To synchronize the thread-shared data access and maintain the speed
(i.e. decoding speed), use multiple mutexes based on mb_rows to reduce
the number of synchronizations needed, make the reads and writes of
the shared data protected, and reduce the number of mb_col writes by
nsync times.
The decoder speed tests showed < 3% speed loss while using 2 ~ 4
threads.
Change-Id: Ie296defffcd86a693188b668270d811964227882
The nominal tx_type for a given mode is used as a context
to encode the actual tx_type for intra.
Results:
derflr: -0.241% BDRATE
hevcmr: -0.366% BDRATE
Change-Id: Icfe7b0a58d79bc6497a06e3441779afec6e01e21
This commit enables encoder to avoid 8x4 and 4x8 partitions for
scaled reference frames when libvpx is configured and built with
--enable-better-hw-compatibility
Change-Id: I02ad65c386f5855f4325d72570c49164ed52f413
Move the logic for forcing zero_mode after the
(ref_frame & flag_list) check.
This was causing an memory leak under msan:
https://bugs.chromium.org/p/webrtc/issues/detail?id=5402
Change-Id: Ie9d243369f8ed7c332f46178275945331da4fd85
Under --enable-better-hw-compabibility, this commit adds the asserts
that no mv clamping is applied for scaled references, so when built
with this configure option, decoder will assert if an input bitstream
triggger mv clamping for scaled reference frames.
Change-Id: I786e86a2bbbfb5bc2d2b706a31b0ffa8fe2eb0cb
This commit adds a new configure option:
--enable-better-hw-compatibility
The purpose of the configure option is to provide information on known
hardware decoder implementation bugs, so encoder implementers may
choose to implement their encoders in a way to avoid triggering these
decoder bugs.
The WebM team were made aware of that a number of hardware decoders
have trouble in handling the combination of scaled frame reference
frame and 8x4 or 4x8 partitions. This commit added asserts to vp9
decoder, so when built with above configure option, the decoder can
assert if an input bitstream triggers such decoder bug.
Change-Id: I386204cfa80ed16b50ebde57f886121ed76200bf
Add function to compute skin map for a given block, as its
used in several places (cyclic refresh, noise estimation, and denoising).
Change-Id: Ied622908df43b6927f7fafc6c019d1867f2a24eb
Set initial values for these parameters in the vp9_init_layer_context().
This also fixes an issue in the svc-bypass mode when frame flags are
passed via the vpx_codec_encode().
Change-Id: I0968f04672f8d3d2fe2cea6b8a23f79f80d7a8b1
Otherwise, per-segment lossless might mean that some segments are not
lossless and they could still want to use another mode. The per-block
tx points remain uncoded on blocks where (per the segment id) the Q
value implies lossless.
Change-Id: If210206ab1fe3dd11976797370c77f961f13dfa0
For coding block sizes <=16X16, if the block is determined to be skin,
then always allow for that block to be candidate for refresh. So if that
block happens to be on the boost segment(s), segment won't get reset to 0
and delta-q will be applied.
PSNR/SSIM metrics neutral (little/no change) on RTC clips.
Speed increase small/negligible (< 1%).
Some visual improvement on faces in a few RTC clips.
Change-Id: I6bf0fce6f39d820b491ce05d7c017ad168fce7d6
arm-none-linux-gnueabi- is an anachronism and makes building on native
arm platforms more difficult. further, many distros include alternative
cross compilers, e.g., arm-linux-gnueabihf-, so the choice is best left
up to the user.
Change-Id: Id8aaf820ed112b85db2b8518d0e9d8abee1ad85c
avoids picking up defaults if CROSS is forcibly set empty as in:
$ CROSS= ./configure ...
BUG=1121
Change-Id: I6af91959288dede01efe3e5945698ab249eb6ec3
reduce the register count by 1 to avoid xmm6 and unnecessarily
penalizing the other users of the base macro
Change-Id: I59605c9a41a31c1b74f67ec06a40d1a7f92c4699
In 32-bit build with --enable-shared, there is a lot of
register pressure and register src_strideq is reused.
The code needs to use the stack based version of src_stride,
but this doesn't compile when used in an lea instruction.
This patch also fixes a related segmentation fault caused by the
implementation using src_strideq even though it has been
reused.
This patch also fixes the HBD subpel variance tests that fail
when compiled without disable-optimizations.
These failures were caused by local variables in the assembler
routines colliding with the caller's stack frame.
Change-Id: Ice9d4dafdcbdc6038ad5ee7c1c09a8f06deca362
H/V intra mode was only enabled for bsize < 16x16,
enable it also for bsize=16x16.
Metrics are neutral with this change:
Overall very small gain (0.1%), small visual gain on some RTC clips.
Change-Id: Ib2d7a44382433bfc11cf324aa3cc5c382ea9e088
For testing implemented a fixed pattern and delta, 1 pass,
fixed Q, low delay mode.
This has not in any way been tuned or optimized.
Change-Id: Icf9b57c3bb16cc5c0726d5229009212af36eb6d9
(copied from VP9)
The one pass VBR mode selects a Q range based on a
moving average of recent Q values. This calculation
should have been excluding arf overlay frames as these
are usually coded at the highest allowed value. Their
inclusion skews the average and can cause it to drift
upwards even when the clip as a whole is undershooting.
As such it can undermine correct adaptation of the allowed
Q range especially for easy content.
Change-Id: I9e12da84e12917e836b6e53ca4dfe4f150b9efb1
For testing implemented a fixed pattern and delta, 1 pass,
fixed Q, low delay mode.
This has not in any way been tuned or optimized.
Change-Id: Idf5ee179b277fa15d07a97f14f2ce5bbaae80a04
The one pass VBR mode selects a Q range based on a
moving average of recent Q values. This calculation
should have been excluding arf overlay frames as these
are usually coded at the highest allowed value. Their
inclusion skews the average and can cause it to drift
upwards even when the clip as a whole is undershooting.
As such it can undermine correct adaptation of the allowed
Q range especially for easy content.
Change-Id: I7d10fe4227262376aa2dc2a7aec0f1fd82bf11f9
The culprit is on the decode side xd->lossless[i] setup was in wrong
location where segment features are not yet decoded.
Also on the encoder side, transform mode was not set consistently
between when tx_mode is selected and how tx_mode is enforced in
tx size selection.
Change-Id: I4c4c32188fda7530cadab9b46d4201f33f7ceca3
Keep track of frame indexes for the references, and
constrain inter mode search for reference with same
temporal alignment.
Improves speed by about ~15%, no noticeable loss in
compression performance.
Change-Id: I5c407a8acca921234060c4fcef4afd7d734201c8
Lower the threshold for splitting 32x32->16x16 based on average variance,
and add lower bound condition for this split to occur. This prevents
unneccassry splitting for areas with very low variance.
Change-Id: Ibeb33b3d993632c2019f296eb87ef3b7e3568189
For non-rd variannce partition, speed >= 5:
Adjustments to reduce dragging artifcat of background area near
slow moving boundary.
-Decrease base threshold under low source noise conditions.
-Add condition to split 64x64/32x32 based on average variances
of lower level blocks.
PSNR/SSIM metrics go down ~0.7/0.9% on average on RTC set.
Visually helps to reduce dragging artifact on some rtc clips.
Change-Id: If1f0a1aef1ddacd67464520ca070e167abf82fac
Reallocate the xmm register usage so that no ARCH_X86_64 required.
Reduce memory access to the left neighbor by half.
Speed up by single digit on big core machine.
Change-Id: I392515ed8e8aeb02e6a717b3966b1ba13f5be990
This commit makes the sub8x8 block rate-distortion optimization
scheme use precise motion compensated prediction to compute the rd
cost. It fixes a potential buffer overflow issue related to sub8x8
motion search on scaled reference frame.
Change-Id: I4274992ef4f54eaacfde60db045e269c13aaa2de
GET_GOT modifies the stack pointer so the offset for left's address will
be wrong if loaded afterword.
Change-Id: Iff9433aec45f5f6fe1a59ed8080c589bad429536
Relocate the function from SSSE3 to SSE2, Unroll loop from 16 to 8,
and reduce mem access to left.
Speed up by single digit in ./test_intra_pred_speed on big core
machines.
Change-Id: I2b7fc95ffc0c42145be2baca4dc77116dff1c960
Xcode 7 refuses to link to x86 and x86_64 code that's built for
iphone sim, so add an extra command line flag that forces iosbuild
to use darwin15 targets.
Change-Id: I2228d458f5cccf4d26866040380a974f88d9d360
This commit enables the new temporal filter system for VP9. For
speed 1, it improves the compression performance:
derf 0.54%
stdhd 1.62%
Change-Id: I041760044def943e464345223790d4efad70b91e
This change has been imported from VP9 and
alters the nature and use of exhaustive motion search.
Firstly any exhaustive search is preceded by a normal step search.
The exhaustive search is only carried out if the distortion resulting
from the step search is above a threshold value.
Secondly the simple +/- 64 exhaustive search is replaced by a
multi stage mesh based search where each stage has a range
and step/interval size. Subsequent stages use the best position from
the previous stage as the center of the search but use a reduced range
and interval size.
For example:
stage 1: Range +/- 64 interval 4
stage 2: Range +/- 32 interval 2
stage 3: Range +/- 15 interval 1
This process, especially when it follows on from a normal step
search, has shown itself to be almost as effective as a full range
exhaustive search with step 1 but greatly lowers the computational
complexity such that it can be used in some cases for speeds 0-2.
This patch also removes a double exhaustive search for sub 8x8 blocks
which also contained a bug (the two searches used different distortion
metrics).
For best quality in my test animation sequence this patch has almost
no impact on quality but improves encode speed by more than 5X.
Restricted use in good quality speeds 0-2 yields significant quality gains
on the animation test of 0.2 - 0.5 db with only a small impact on encode
speed. On most natural video clips, however, where the step search
is performing well, the quality gain and speed impact are small.
Change-Id: Iac24152ae239f42a246f39ee5f00fe62d193cb98
4x4 Intra predictor implemented with MMX is replaced with SSE2.
Segfault in change 315561 when decoding vp8 is taken care of.
Change-Id: I083a7cb4eb8982954c20865160f91ebec777ec76
Fix copied over from VP9 master to VP10 master.
Do not reset the alt ref active flag when overlaying the middle
arf(s) of a multi arf group.
Change-Id: I1b7392107e7c675640d5ee1624012f39cc374c58
use CONFIG_VP[89] to protect white-box tests and drop redundant
uses of CONFIG_VP9 in variable assignments within that block
Change-Id: Id3c6cf5c7822aa161b19768b295f58829a1c6447
For non-rd variance partition: Adjust variance threhsold based
on noise level estimate. This change allows the adjustment to be
updated more frequently.
Change-Id: Ie2abf63bf3f1ee54d0bc4ff497298801fdb92b0d
Relocate the function from SSSE3 to SSE2, Unroll loop from 8 to 4,
and reduce mem access to left.
Speed up by >20% in ./test_intra_pred_speed.
Change-Id: Ie48229c2e32404706b722442942c84983bda74cc
Relocate the function from SSSE3 to SSE2, Unroll loop from 4 to 2,
and reduce mem access to left.
Speed up by >20% in ./test_intra_pred_speed.
Change-Id: Ib9f1846819783b6e05e2a310c930eb844b2b4d2e
The range_check is not used because the bit range
in fdct# is not correct. Since we are going to merge in a new version
of fdct# from nextgenv2, we won't fix the incorrect bit range now.
Change-Id: I54f27a6507f27bf475af302b4dbedc71c5385118
For low resolutions, whem 4x4downsample is used for variance,
use the same force split (that is used for 8x8downsample) for 16x16 blocks.
No change in metrics. Small improvement visually.
Change-Id: I915b9895902d0b9a41e75d37fee1bf3714d2366d
the loop filter level is transmitted as 6-bits + sign so needs to be clamped in
the delta + absolute case.
BUG=https://bugzilla.mozilla.org/show_bug.cgi?id=1224363
Change-Id: Icbdca4fdbf043466429bd5c9d59dbe913bf153bc
the quantizer is transmitted as 7-bits + sign so needs to be clamped in
the delta + absolute case.
BUG=https://bugzilla.mozilla.org/show_bug.cgi?id=1224361
Change-Id: I9115f5d1d5cf7e0a1d149d79486d9d17de9b9639
This is so we may update level at any time (e.g., to be used
for setting thresholds in variance-based partition).
Change-Id: I32caad2271b8e03017a531f9ea456a6dbb9d49c7
Under certain denoising conditons, check for re-evaluation of
zero_last mode if best mode was golden reference.
Change-Id: Ic6cdfd175eef2f7d68606300c7173ab6654b3f6e
Reduce mem access to left. Speed up by 10% in ./test_intra_pred_speed
with the same instruction size.
Change-Id: Ia33689d62476972cc82ebb06b50415aeccc95d15
For non-rd variance partition: only allow minmax computation
(which currently has no arm-neon optimization) for speeds < 8.
Performance loss is small: On RTC set with speed 8, few clips lose ~2/3%,
average loss is < 1%.
Change-Id: Ia9414f4d0b77dc83c3e73ca8de5d903f64b425ce
Relocate h_predictor_4x4 from SSSE3 to SSE2 with XMM registers.
Speed up by ~25% in ./test_intra_pred_speed.
Change-Id: I64e14c13b482a471449be3559bfb0da45cf88d9d
Change initial state of noise level, and only update
denoiser with noise level when estimate is done.
Change-Id: If44090d29949d3e4927e855d88241634cdb395dc
For denoising, and for noise level above threshold, re-evaluate
ZEROMV for mode selection after denoising.
Current change only does this check if selected best mode (before denoising)
was intra.
Change-Id: I4b1435b68d26c78f7597b995ee7bff0ddd5f9511
Always round sum error and sum square error toward zero in variance
calculations. This prevents variance from becoming negative.
Avoiding rounding variance at all might be better but would be far
more invasive.
Change-Id: Icf24e0e75ff94952fc026ba6a4d26adf8d373f1c
This change makes sure last reference with zero mv
is always checked for mode selection.
No change in metrics.
Change-Id: Iaf01877bf34272b966c78bfe18daad882a0a419e
the final sum may use up to 26 bits
+ add a unit test
+ disable the sse2 as the result will rollover; this will be fixed in a
future commit
Change-Id: I2a49811dfaa06abfd9fa1e1e65ed7cd68e4c97ce
Change on affects 1 pass CBR.
On key frame, temporal layer_id is reset to 0 for 1 pass CBR,
but since "layer" is reset, the svc.layer_context[layer].is_key_frame
was not correspondingly set properly.
Change-Id: I08f6da0a55ac7429ccfbaddfb7be14479e43543b
tm_predictor_4x4 is implemented with SSE2 using XMM registers.
Speed up by ~25% in ./test_intra_pred_speed.
Change-Id: I25074b78d476a2cb17f81cf654bdfd80df2070e0
--disable-XXX has the effect of disabling all extensions above it, e.g.,
--disable-ssse3 disables ssse3-avx2.
Change-Id: If02b44ca71ee12e4acb12010db8593a7989f2a9d
Small changes to the best quality default speed trade off.
Some speedup settings are worth while even for best quality as they
have only a very small impact on quality but a significant impact on
encode time.
These changes give as much as a further 50-60% increase in encode
speed for my test animations clip with minimal impact on quality.
For this sequence these changes improve the best quality encode speed
to about the same level as good quality speed 0 in Q3 2015 whilst
retaining the large quality gain of over 1 db
For many natural videos though the quality difference from good 0
to best is much smaller.
Change-Id: I28b3840009d77e129817a78a7c41e29cb03e1132
This is simpler than the previous scheme, which tried to allocate
the CRITICAL_SECTION struct in a thread-safe manner before it
could use it to run the wrapped function in a thread-safe manner.
Change-Id: I172e5544e5f16403a3a0e5e2b9104b1292a0d786
This change alters the nature and use of exhaustive motion search.
Firstly any exhaustive search is preceded by a normal step search.
The exhaustive search is only carried out if the distortion resulting
from the step search is above a threshold value.
Secondly the simple +/- 64 exhaustive search is replaced by a
multi stage mesh based search where each stage has a range
and step/interval size. Subsequent stages use the best position from
the previous stage as the center of the search but use a reduced range
and interval size.
For example:
stage 1: Range +/- 64 interval 4
stage 2: Range +/- 32 interval 2
stage 3: Range +/- 15 interval 1
This process, especially when it follows on from a normal step
search, has shown itself to be almost as effective as a full range
exhaustive search with step 1 but greatly lowers the computational
complexity such that it can be used in some cases for speeds 0-2.
This patch also removes a double exhaustive search for sub 8x8 blocks
which also contained a bug (the two searches used different distortion
metrics).
For best quality in my test animation sequence this patch has almost
no impact on quality but improves encode speed by more than 5X.
Restricted use in good quality speeds 0-2 yields significant quality gains
on the animation test of 0.2 - 0.5 db with only a small impact on encode
speed. On most clips though the quality gain and speed impact are small.
Change-Id: Id22967a840e996e1db273f6ac4ff03f4f52d49aa
This reverts commit 380a5519cc.
This causes an assertion failure in debug_check_frame_counts() which
probably isn't valid with this change; leaving the investigation for
later now.
Change-Id: Ieda5ca811ed2fa50a0cc6935919a8d10dca996e0
This function now has an AVX intrinsics version which is about 80%
faster compared to the C implementation. This provides a 2-4% total
speed-up for encode, depending on encoding parameters. The function
utilizes 3 properties of the cost function lookup table, constructed
in 'cal_nmvjointsadcost' and 'cal_nmvsadcosts'.
For the joint cost:
- mvjointsadcost[1] == mvjointsadcost[2] == mvjointsadcost[3]
For the component costs:
- For all i: mvsadcost[0][i] == mvsadcost[1][i]
(equal per component cost)
- For all i: mvsadcost[0][i] == mvsadcost[0][-i]
(Cost function is even)
These must hold, otherwise the AVX version of the function cannot be used.
Change-Id: I6c2791d43022822a9e6ab43cd124a773946d0bdc
the return value of enabled, which may be empty, is handled by the for
loop. this avoids making an unnecessarily long command line which may
fail in certain cases.
Change-Id: Ib88ecbbe2c0f6d7debb600b4caed4884497263b1
Change is only for real-time mode, speed >= 5, and non-screen content mode.
Add bias to zero/low motion for big blocks, if noise estimation
is enabled and noise level is above threshold.
Change-Id: I3a0a4608ede6aa535bda6eca528d20f8aba738e7
For 1 pass CBR mode: increase waiting time after key frame
before we start sampling rate control behavior for determining
resize. This change need to disable one internal resize(DownUp)
temporally since it requires a longer clip to do so.
Change-Id: If21beda1be23f169ee541ab4dd642f718347887a
Use same setting for speed 5 (as it is for speed > 5).
Change is only for real-time (non-rd) mode.
Change-Id: I830250eac654328373cb318baa89d4f0e63942e1
Reduces Linux perf estimated cycle count for pack_mb_tokens on a
lossless encode on my desktop from 61858501855 to 48154040219 or from
26% of the overall profile to 21%.
Change-Id: I9ca3426d7e3272bc7f7030abda4f0d0cec87fb4a
This reverts commit f1342a7b07.
This breaks 32-bit builds:
runtime error: load of misaligned address 0xf72fdd48 for type 'const
__m128i' (vector of 2 'long long' values), which requires 16 byte
alignment
+ _mm_set1_epi64x is incompatible with some versions of visual studio
Change-Id: I6f6fc3c11403344cef78d1c432cdc9147e5c1673
Add threshold/condition on spatial_variance and brightness level.
Modification to normalization of block variance.
Change resolution limit below which we disable noise estimation.
Change-Id: If5be08a26ceda351242d8a58d2f0bc88c0a918f0
This function now has an AVX intrinsics version which is about 80%
faster compared to the C implementation. This provides a 2-4% total
speed-up for encode, depending on encoding parameters. The function
utilizes 3 properties of the cost function lookup table, constructed
in 'cal_nmvjointsadcost' and 'cal_nmvsadcosts'.
For the joint cost:
- mvjointsadcost[1] == mvjointsadcost[2] == mvjointsadcost[3]
For the component costs:
- For all i: mvsadcost[0][i] == mvsadcost[1][i]
(equal per component cost)
- For all i: mvsadcost[0][i] == mvsadcost[0][-i]
(Cost function is even)
These must hold, otherwise the AVX version of the function cannot be used.
Change-Id: I184055b864c5a2dc37b2d8c5c9012eb801e9daf6
Change is only for real-time mode, speed > 5, and non-screen content mode.
Bias is based on block size and motion vector level (motion above some threshold).
Helps to improves stability in background from lightning changes.
PSNR/SSIM metrics on RTC set almost no change/neutral (within +/- 0.1).
Change-Id: I7eac13c1ae10be4ab1f40acc7f9f1df5653ece9d
Only use non-zero threshold(s) for breakout if
the motion level of the current tested mode is low.
Change-Id: I22aae961cc42371b49d3f648560181cc54708502
Source noise level estimate is also useful for
setting variance encoder parameters (variance thresholds,
qp-delta, mode selection, etc), so allow it to be used also
if denoising is not on.
Change-Id: I4fe23d47607b4e17a35287057f489c29114beed1
this avoids redefining vpx_codec_vp9_dx, vpx_codec_vp9_dx_algo in
vp9_encoder_parms_get_to_decoder.cc
Change-Id: I3b89e7a62497227ee32419f1a7d30e4c10a13c05
(cherry picked from commit ca163b85bb)
this avoids redefining vpx_codec_vp9_dx, vpx_codec_vp9_dx_algo in
vp9_encoder_parms_get_to_decoder.cc
Change-Id: I3b89e7a62497227ee32419f1a7d30e4c10a13c05
The old workaround "p = 0 ? 0 : p -1" is misleading.
?: happens before =
assigning back to p truncates to one byte.
Therefore it is equivalent to (p - 1) & 0xFF, but the check just exists
to work around a first pass bug, so let's make the work around more
clear.
https://bugs.chromium.org/p/webm/issues/detail?id=1089
Change-Id: I587c44dd61c1f3767543c0126376f881889935af
Width and height of downscaling resolution should not be lower
than min_width and min_height which can be set as needed, both
are 180 for now.
Change-Id: I34d06704ea51affbdd814246e22ee8d41d991f00
This reverts commit 7f56cb2978.
It causes uninitialized reads in the first pass setting up later cost tables.
Change-Id: I2df498df3f5c03eff359f79edf045aed0c618dc9
Remove delta index 254 from probability remapping and subexp coding.
Saves 1-bit when the delta index is 129.
Change-Id: I88aba565fc766b1769165be458d2efd3ce45817e
Adjust variance threshold, delta-qp, and intra penalty cost,
based on estimated noise level in source.
Replace denoising_on with a level value=L/M/H.
Change-Id: I0c017dae75a5d897367d2c42dec26f2f37e447c1
The option exists specifically to allow for configurations
where the build environment is different from the configure
environment.
Change-Id: I95196fa3c49700251d10ff5d256dc7380e39d0c4
The old workaround "p = 0 ? 0 : p -1" is misleading.
?: happens before =
assigning back to p truncates to one byte.
Therefore it is equivalent to (p - 1) & 0xFF, but the check just exists
to work around a first pass bug, so let's make the work around more
clear.
https://code.google.com/p/webm/issues/detail?id=1089
Change-Id: Ia6dcc8922e1acbac0eeca23a4d564a355c489572
The custom LCG is based on the POSIX recommend constants for a 16-bit
rand(). This implementation uses less computation than typical standard
library procedures which have been extended for 32-bit support, is
guaranteed to be reentrant, and identical everywhere.
Change-Id: I3140bbd566f44ab820d131c584a5d4ec6134c5a0
Ref: http://pubs.opengroup.org/onlinepubs/9699919799/functions/rand.html
Bug relating to issue:- http://b/25090786
base_frame_target is supposed to track the idealized bit
allocation based on error score and not the actual bits
allocated to each frame.
The clamping of this value based on the VBR min and max pct values
was causing a bug where in some cases the loop that adjusts the
active max quantizer for each GF group was running out of bits at
the end of a KF group. This caused a spike in Q and some ugly artifacts.
A second change makes sure that the calculation of the active
Q range for a group DOES, however, take account of clamping.
Change-Id: I31035e97d18853530b0874b433c1da7703f607d1
Periodically estiamte noise level in source, and only denoise
if estimated noise level is above threshold.
Change-Id: I54f967b3003b0c14d0b1d3dc83cb82ce8cc2d381
Add the row and column index to the argument list of unit functions
called by foreach_transformed_block wrapper. This avoids the
repeated internal parsing according to the block index.
Change-Id: Ie7508acdac0b498487564639bc5cc6378a8a0df7
A new version of vp9_highbd_error_8bit is now available which is
optimized with AVX assembly. AVX itself does not buy us too much, but
the non-destructive 3 operand format encoding of the 128bit SSEn integer
instructions helps to eliminate move instructions. The Sandy Bridge
micro-architecture cannot eliminate move instructions in the processor
front end, so AVX will help on these machines.
Further 2 optimizations are applied:
1. The common case of computing block error on 4x4 blocks is optimized
as a special case.
2. All arithmetic is speculatively done on 32 bits only. At the end of
the loop, the code detects if overflow might have happened and if so,
the whole computation is re-executed using higher precision arithmetic.
This case however is extremely rare in real use, so we can achieve a
large net gain here.
The optimizations rely on the fact that the coefficients are in the
range [-(2^15-1), 2^15-1], and that the quantized coefficients always
have the same sign as the input coefficients (in the worst case they are
0). These are the same assumptions that the old SSE2 assembly code for
the non high bitdepth configuration relied on. The unit tests have been
updated to take this constraint into consideration when generating test
input data.
Change-Id: I57d9888a74715e7145a5d9987d67891ef68f39b7
This causes the output of find_ref_mvs() to always be unique or zero.
A nice side-effect of this is that it also causes the output of
find_ref_mvs_sub8x8() to be unique-or-zero, and it will not ignore
available candidate MVs under certain conditions.
See issue 1012.
Change-Id: If4792789cb7885dbc9db420001d95f9b91b63bfa
Added optimization of the 8 bit assembly quantizer routines. This makes
these functions up to 100% faster, depending on encoding parameters.
This patch maskes the encoder faster in both the high bitdepth and 8bit
configurations. In the high bitdepth configuration, it effects profile 0
only.
Based on my profiling using 1080p input the net gain is between 1-3% for
the 8 bit config, and around 2.5-4.5% for the high bitdepth config,
depending on target bitrate. The difference between the 8 bit and high
bitdepth configurations for the same encoder run is reduced by 1% in all
cases I have profiled.
Change-Id: I86714a6b7364da20cd468cd784247009663a5140
VP8E_UPD_ENTROPY, VP8E_UPD_REFERENCE and VP8E_USE_REFERENCE have been
deprecated since the initial public release
Change-Id: Ied16b441eec13434d85f1ab115d49ccaf5f2f7b0
Some more testing of this patch would probably be useful, but I
think the basics of it should work fine now.
See issue 1035.
Change-Id: I4a36d58f671c5391cb09d564581784a00ed26245
This experiment allows using full above/right edges for all transform
sizes whenever available (for d45/d63), and adds bottom/left edges for
d207.
See issue 1043.
Change-Id: I5cf7f345e783e8539bb6b6d2c9972fb1d6d0a78b
In VP9, the ref MV had to point to a block that itself fully resided
within the visible image, i.e. all borders of the image had to be
within the visible borders of the coded frame. This is somewhat
illogical, and had obscure side effects, e.g. clamping of fairly
reasonable motion vectors such as 0,0 were clipped to negative values
if the block was overhanging on frame edges (such as the last rows
on 1080p content), which makes no sense whatsoever.
Instead, relax clamping constraints such that the ref MVs are allowed
to point to blocks exactly outside the visible edges in both Y as well
as UV planes, including the 8tap filter edges (that's why the offset is
8 pixels + block size).
See issue 1037.
Change-Id: I2683eb2a18b24955e4dcce36c2940aa2ba3a1061
This has various benefits:
- simplify implementations because we don't have to switch between
multiple probability tables depending on frametype
- allows fw subexp and bw adaptivity for partitions/uvmode in keyframes
See issue 1040 point 5.
Change-Id: Ia566aa2863252d130cee9deedcf123bb2a0d3765
Locate them (code-wise) in frame_context, and have them be updated
as any other probability using the subexp forward and adaptive bw
updates.
See issue 1040 point 1.
TODOs:
- real-world default probabilities
- why is counts sometimes NULL in the decoder? Does that mean bw
adaptivity updates only work on some frames? (I haven't looked
very closely yet, maybe this is a red herring.)
Change-Id: I23b57b4e5e7574b75f16eb64823b29c22fbab42e
Account for rounding in distortion calculation in k-means;
carry out rounding before duplicates removal of base colors;
replace numbers with macros;
use prefix increment.
Slight coding gain (<0.1%) on screen_content testset.
Change-Id: Ie8bd241266da6b82c7b2874befc3a0c72b4fcd8c
Adjust the qp threshold and consec_zeromv threshold for
limiting cyclic refresh. Also increase the refresh period
when the limit amount is significant, and some code-cleanup.
Small gain in PSNR/SSIM metrics: ~0.25/0.3 gain on RTC set, speed 7.
Change only affects non-screen content.
Change-Id: I1ced87a89a132684c071e722616e445b2d18236a
Adjust the qp threshold based on the denoising setting; not allow
to scale directly from original resolution to one half and vise versa.
Change-Id: I032a9b22f8e1c88de6bb81cf8351367223a3e40d
For the re-encoding (at max-qp) on the detected high-content change:
update rate correction factor, reset rate over/under-shoot flags,
and update/reset the rate control for layered coding.
Change-Id: I5dc72bb235427344dc87b5235f2b0f31704a034a
Changes to the breakout behavior for partition selection.
The biggest impact is on speed 0 where encode speed in
some cases more than doubles with typically less than 1%
impact on quality.
Speed 0 encode speed impact examples
Animation test clip: +128%
Park Joy: +59%
Old town Cross: + 109%
Change-Id: I222720657e56cede1b2a5539096f788ffb2df3a1
This change (in a new config experiment: universal_hp) removes the
bitstream parsing dependency of the HP MV bit on the ref MV to be
coded. It also cleans up clearing of the HP bit in near/nearestMV,
since HP is always on if it's set in the frame header.
This admittedly doesn't clean up the crap that could be cleaned up,
but that's mostly because I think this needs some careful review;
not so much for coding style, but more from hardware people and from
the codec team on what we/you want. It would also be nice to get some
actual numbers on the real quality impact of this change. If, for
example, hardware people come up and tell us they don't actually care
anymore, we should probably just this code as-is and do nothing (i.e.
discard this patch).
See issue 1036.
Change-Id: Ic9b106f34422aa0f79de0c28125b72d566bd511a
This actually has no effect whatsoever, since the input MVs themselves
are clamped by clamp_mv_ref() already, which is significantly more
restrictive in its bounds.
Change-Id: I4a3a7b2b121ee422c56428c2a12d930c3813c06e
We only write EOSB tokens if we write tokens (i.e. not for skip blocks),
and we write EOSB tokens per-plane instead of per block.
Change-Id: I8d7ee99f8ec50eb7ae809f9f9282c1c91dbf6537
Add palette mode for keyframe luma channel. Palette mode is enabled
when using "--tune-content=screen" in encoding config parameters.
on screen_content testset: +6.89%
on derlr : +0.00%
Design doc (WIP):
https://goo.gl/lD4yJw
Change-Id: Ib368b216bfd3ea21c6c27436934ad87afdaa6f88
If high bit depth configuration is enabled, but encoding in profile 0,
the code now falls back on optimized SSE2 assembler to compute the
block errors, similar to when high bit depth is not enabled.
Change-Id: I471d1494e541de61a4008f852dbc0d548856484f
The artifact occurs periodically when VP9 denoiser is on and
refresh_golden_frame happen. When refresh_golden_frame happen,
we should copy the frame buffer instead of swapping the pointers.
Change-Id: Ib3204c4b04db28ecf439c6d9e61f3d146f04196d
this reduces the number of synchronizations in decode_tiles_mt() and
improves overall performance when the number of threads is less than the
number of tiles
Change-Id: Iaee6082673dc187ffe0e3d91a701d1e470c62924
Small code cleanup. consec_zeromv refresh threshold
does not need to be computed for every super-block.
No change in behavior.
Change-Id: I8c4b1b28072f42b01d917fff6d1f62722f1e1554
The serial decode check is too strict for tile-threaded decoding as
there is no guarantee on the decode order nor which specific error
will take precedence. Currently a tile-level error is not forwarded so
the frame will simply be marked corrupt.
Change-Id: I51cf1e39e44bedeac93746154b36a4ccb2f059b1
Use the existing VP9_SET_SVC control to set the
first spatial layer to encode.
Since we loop over all spatial layers inside the encoder, the
setting of spatial_layer_id via VP9_SET_SVC has no relevance.
Use it instead to set the first_spatial_layer_to_encode,
which allows an application to skip encoding lower layer(s).
Change only affects the 1 pass CBR SVC.
Change-Id: I5d63ab713c3e250fdf42c637f38d5ec8f60cd1fb
When configured with high bit detpth enabled, the 8bit quantize
function stopped using optimised code. This made 8bit content
decode slowly. This commit re-enables the SSSE3 optimisations.
Change-Id: I194b505dd3f4c494e5c5e53e020f5d94534b16b5
We have historically added new bits to cat6 whenever we added a new
transform size (or bitdepth, for that matter). However, we have
always coded these new bits regardless of the actual transform size,
which means that for smaller transforms, we code bits that cannot
possibly be set. The coding (quality) impact of this is negligible,
but the bigger issue is that this allows creating bitstreams with
coefficient values that are nonsensible and can cause int overflows,
which then de facto become part of the bitstream spec. By not coding
these bits, we remove this possibility.
See issue 1065.
Change-Id: Ib3186eca2df6a7a15ddc60c8b55af182aadd964d
This is identical to what the tile size does for the last tile. See
issue 1042 (which covers generalizing the superframe/tile concepts).
Change-Id: I1f187d2e3b984e424e3b6d79201b8723069e1a50
See issue 1051. 6 bits is fairly arbitrary but at least allows writing
delta Q values that are fairly normal in other codecs. I can extend to
8 if people want full range, although I personally don't have any need
for that.
Change-Id: I0a5a7c3d9b8eb3de4418430ab0e925d4a08cd7a0
The resolution check fixs the issue which resets resize_pending
unnecessarily and causes not-bitexact with previous one-step version.
Change-Id: I4e7660b3c8f34f59781e2e61ca30d61080c322de
When configured with high bit detpth enabled, the 8bit quantize
function stopped using optimised code. This made 8bit content
decode slowly. This commit re-enables the SSE2 optimisation
(but not the SSSE3 optimisation).
Change-Id: Id015fe3c1c44580a4bff3f4bd985170f2806a9d9
Temporary fix to denoiser when dynamic resizing is on.
-Reallocate denoiser buffers on resized frame.
-Force golden update on resized frame.
-Don't denoise resized frame, and copy source into denoised buffers.
Change-Id: Ife7638173b76a1c49eac7da4f2a30c9c1f4e2000
For screen-content mode, with frame dropper off, put a limit
on how low encoder buffer can go.
Under hard slide changes, the buffer level can go too low and then
take long time to come back up (in particular when frame-dropping
is not used), which will affect the active_worst and target frame size.
Change-Id: Ie9fca097e05cd71141f978ec687f852daf9de332
Dynamic resizing now support two-steps scaling: first go down to
3/4 and then 1/2. This feature is under a flag which controls the
switch between two-steps scaling and one-step scaling (1/2 only).
Change-Id: I3a6c1d3d5668cf8e016a0a02aeca737565604a0f
This is more a proof of concept than anything else. The problem here
isn't so much how to code it, but rather where to place the resulting
code. All intrapred DSP code lives in vpx_dsp, so do we want the vp10
specific intra pred functions to live there, or in vp10/?
See issue 1015.
Change-Id: I675f7badcc8e18fd99a9553910ecf3ddf81f0a05
The x86 simd expects this. Identical alignment can be found in vp9
and vp10 also. Fixes crashes on 32bit x86 systems.
Change-Id: I229c88d8f696acbef5337c8fa9503528df4e1c40
I've added a few new functions (d45e, d63e, he, ve) to cover the
filtered h/v 4x4 predictors that are vp8-specific, the "correct"
d45 with the correctly filtered bottom-right pixel (as opposed to
the unfiltered version in vp9), and the "broken" d63 with weirdly
filtered bottom-right pixels (which is correctly filtered in vp9).
There may be a minor performance impact on all systems because we
have to do an extra copy of the Above pixel array to incorporate
the topleft pixel in the same array (thus fitting the vpx_dsp API).
In addition, armv6 will have a more serious performance impact b/c
I removed the armv6/vp8-specific assembly. I'm not sure anyone
cares...
Change-Id: I7f9e5ebee11d8e21aca2cd517a69eefc181b2e86
define NOMINMAX to allow the std:: versions to be used; min/max will be
defined transitively via windows.h otherwise
Change-Id: I692b03fa3e70b7a53962d3fd209498f70f712fed
vp9_filter_block_plane_ss11() and vp9_filter_block_plane_non420()
are only called for the uv planes.
Change-Id: Iacd3b3242c8ce581edd37c8f06d95efc8a0f88a3
The loopfilter masks are now built in the decode loop.
This is done so we can eventually reduce the number of
MODE_INFO structs required by the decoder.
The encoder builds the masks for the entire frame prior
to calling the loopfilter.
Change-Id: Ia2146b07e0acb8c50203e586dfae0c4c5b316f11
When configured with high bitdepth enabled, the 8bit transform
stopped using optimised code. This made 8bit content decode slowly.
Change-Id: I67d91f9b212921d5320f949fc0a0d3f32f90c0ea
Update rate correction factor when we drop the frame due to overshoot.
Only affects when the drop_overshoot feature is on: screen_content_mode = 2.
Change-Id: I67e24de979b4c74744151d2ceb3cd75fec2a1e7a
In the decoder, map this to the output variable vpx_image_t.r_w/h.
This is intended as an improved version of VP9D_GET_DISPLAY_SIZE,
which doesn't work with parallel frame decoding. In the encoder,
map this to a codec control func (VP9E_SET_RENDER_SIZE) that takes
a w/h pair argument in a int[2] (identical to VP9D_GET_DISPLAY_SIZE).
Also add render_size to the encoder_param_get_to_decoder unit test.
See issue 1030.
Change-Id: I12124c13602d832bf4c44090db08c1009c94c7e8
The name "display_*" (or "d_*") is used for non-compatible information
(that is, the cropped frame dimensions in pixels, as opposed to the
intended screen rendering surface size). Therefore, continuing to use
display_* would be confusing to end users. Instead, rename the field
to render_*, so that struct vpx_image can include it.
Change-Id: Iab8d2eae96492b71c4ea60c4bce8121cb2a1fe2d
In practice, this fixes the issue that if you have an odd number of
mi_cols, on the full right of the image, the UV int4x4 loopfilter
will be skipped over odd cols as well as odd rows (because it holds a
single variable for both edges).
See issue 1016.
Change-Id: Id53b501cbff9323a8239ed4775ae01fe91874b7e
Use the existing QP condition on limiting cyclic refresh, and add
addiitonal condition that block has been encoded with zero/small motion
x frames in row (where x is at least several times the refresh period).
Additional condition only affect non-screen content mode.
This helps to improve visual stability for noisy input, where on steady
background areas the application of delta_qp may lead to encoding the noise.
Also added a change to use the true skip (after encoding) to update the
last QP.
Change-Id: I234a1128d017d284cf767fdb58ef6c59d809f679
When the iOS SDK major version is 9 or higher:
- Pass -fembed-bitcode to compiler, assembler, and linker.
- Add a warning for simulator targets since yasm doesn't know
what -fembed-bitcode means, and exits with an error.
BUG=https://code.google.com/p/webm/issues/detail?id=1075
Change-Id: I38c997a0225e53c5dd1b4ddf7935d21362953f76
Always add IOS_VERSION_MIN to darwin arm cflags. The warning occured
because the default (9.0) does not match the value set by configure
(6.0).
BUG=https://code.google.com/p/webm/issues/detail?id=1075
Change-Id: Ia9085ceeca10e057f9eb781c14f07581bb6280a5
- Use the iphoneos SDK path (instead of macosx).
- Detect iOS SDK major version and disable media (armv6) when using
iOS SDK version 9 or higher.
BUG=https://code.google.com/p/webm/issues/detail?id=1075
Change-Id: I12f77dbeee4c0084e8322f6841813da8b5e91c16
these have been supported in tile-threaded decoding since:
b3b7645 vp9_dthread: remove frame_parallel_decoding_mode requirement
Change-Id: Ia5a752db9be937153cf4830d9258752136356d1b
Limit transform size for intra to 16x16, for non-screen content mode.
Little/no change in speed or metrics.
32x32 intra block is rarley selected in RTC (non-screen content) case,
but some visual improvement can be seen in some example,
e.g., captured_video_dark_whd.yuv.
Change-Id: I68e2db87875343b3fb9bb407a7709f0088f84072
remove static from fdct4/8/16/32 in vp10/encoder/dct.c
add prefix vp10_ to fdct4/8/16/32
add vp10/encoder/dct.h
Change-Id: I644827a191c1a7761850ec0b1da705638b618c66
Reallocation of mi buffer fails if change size on the first frame and
change config in subsequent frames. Add a condition for resolution
check to avoid assertion failure.
BUG=1074
Change-Id: Ie26ed816a57fa871ba27a72db9805baaaeaba9f3
Reference frame masking logic may skip checking zeromv-last mode.
Fix to avoid this and make sure zero-last is always checked.
No noticeable change in speed, and PSNR/SSIM metrics on RTC set overall
neutral (very small gain ~0.02).
Small visual improvement on few RTC clips.
Change-Id: I26eacdc449126424001a4a64e5ac31949f064417
the range check in dct.c (abs(input[i]) < (1 << bit)) will fail in many
cases. this was broken at the time this check was added
BUG=1076
Change-Id: I3df8c7a555e95567d73ac16acda997096ab8d6e2
the range check in dct.c (abs(input[i]) < (1 << bit)) will fail in the
25-29 range. this was broken at the time this check was added
Change-Id: I8ca9607f6cbdc8be7f47696ffeabbab3ac5727e2
Shortcut arg for --extra-configure-args --enable-examples. Enables
the examples, and thus ensures that all versions of libvpx that
iosbuild.sh produces can actually be linked.
Change-Id: I2ddda094361bf0ac77f8d2ae542e4dc7b2cab158
fixes build on windows x64; previously 'heightq' i.e., the 64-bit register
was accessed when only the 32-bit value was needed. given this is from a
stack variable the upper bits were undefined.
+ bump register/xmm counts; users of SETUP_LOCAL_VARS touch xmm13 in
64-bit builds and filter_block1d16_v* uses one extra temp variable
Change-Id: I9c768c0b2047481d1d3b11c2e16b2f8de6eb0d80
This commit removes mbmi_ext_base pointer from MACROBLOCK struct.
Its use case can be fully covered by cpi->mbmi_ext_base pointer.
Change-Id: I155351609336cf5b6145ed13c21b105052727f30
Add SVC codec control to set the frame flags and buffer indices
for each spatial layer of the current (super)frame to be encoded.
This allows the application to set (and change on the fly) the
reference frame configuration for spatial layers.
Added an example layer pattern (spatial and temporal layers)
in vp9_spatial_svc_encoder for the bypass_mode using new control.
Change-Id: I05f941897cae13fb9275b939d11f93941cb73bee
This means that we don't reconstruct in 4x4 dimensions, but in
blocksize dimensions, e.g. 4x8 or 8x4. This may in some cases lead
to performance improvements. Also, if we decide to re-introduce
scalable coding support, this would fix the fact that you need to
re-scale the MV halfway the block in sub8x8 non-4x4 blocks.
See issue 1013.
Change-Id: If39c890cad20dff96635720d8c75b910cafac495
In vp9, the bottom MV would be the average of the topright and
bottomleft luma MV (instead of the bottomleft/bottomright luma MV).
See issue 993.
Change-Id: Ic91c0b195950e7b32fc26c84c04788a09321e391
This has virtually no effect on coding efficiency, but it is more
logical from a theoretical perspective (since it makes no sense to
me that you would exclude a MV from a list just because it's sign-
inversed value is identical to a value already in a list), and it
also makes the code simpler (it removes a duplicate value check in
cases where signbias is equal between the two MVs being compared).
See issue 662.
Change-Id: I23e607c6de150b9f11d1372fb2868b813c322d37
For reading, this makes the operation branchless, although it still
requires two shifts. For writing, this makes the operation as fast
as writing an unsigned value, branchlessly. This is also how other
codecs typically code signed, non-arithcoded bitstream elements.
See issue 1039.
Change-Id: I6a8182cc88a16842fb431688c38f6b52d7f24ead
The implicitly changed value would be used for contextualizing future
skip flags of neighbour blocks (bottom/right), which is certainly not
what was intended. The original code stems from vp8, and was useful
in cases where coding of the skip flag was disabled. In vp9, the skip
flag is always coded. The result of this change is that for bitstream
parsing purposes, decoding of the skip flag becomes independent of
decoding of block coefficients.
See issue 1014.
Change-Id: I8629e6abe76f7c1d649f28cd6fe22a675ce4a15d
In decoder, export (eventually) into vpx_image_t.range field. In
encoder, use oxcf->color_range to set it (same way as for
color_space).
See issue 1059.
Change-Id: Ieabbb2a785fa58cc4044bd54eee66f328f3906ce
Verify the dynamic resizer behavior for real time, 1 pass CBR mode.
Start at low target bitrate, raise the bitrate in the middle of the
clip, verify that scaling-up does occur after bitrate changed.
Change-Id: I7ad8c9a4c8288387d897dd6bdda592f142d8870c
Verify the dynamic resizer behavior for real time, 1 pass CBR mode.
Run at low bitrate, with resize_allowed = 1, and verify that we get
one resize down event.
Change-Id: Ic347be60972fa87f7d68310da2a055679788929d
For 1 pass CBR spatial-SVC:
Add cyclic refresh parameters to the svc-layer context.
This allows cyclic refresh (aq-mode=3) to be applied to
the whole super-frame (all spatial layers).
This gives a performance improvement for spatial layer encoding.
Addd the aq_mode mode on/off setting as command line option.
Change-Id: Ib9c3b5ba3cb7851bfb8c37d4f911664bef38e165
Fixes temporal scalability. Updates were inadvertently turned
off for two pass svc causing crashes due to gf_group.index
growing unchecked.
Change-Id: Iff759946bf61bbde70630347cc8fa4d51a8c2d2f
The counts didn't take usehp into account, which means that if the
scope of the refmv is too large for the hp bit to be coded, the value
(always 1) is still included in the stats. Therefore, the final
counts will not reflect the entropy of the coded bits, but rather the
entropy of the combination of coded bits and the implied value (which
is always 1). Fix that by only including counts if the hp bit is
actually coded.
See issue 1060.
Change-Id: I19a3adda4a8662a05f08a9e58d7e56ff979be11e
The normative (convolve8) filter is optimized/faster than
the nonnormative one. Pass usage of scaler (normative/nonomorative)
to vp9_scale_if_required(), and always use normative one for 1 pass.
Change-Id: I2b71d9ff18b3c7499b058d1325a9554de993dd52
Unify the style of fdct4() fdct8() fdct16()
Add fdct32()
Add range_check() at each stage
Add unit test at ../../test/vp10_dct_test.cc
Change-Id: I13f76d9046c3ea473c82024b09a5bc8662e2c28e
Upstream hash: 476366249e1fda7710a389cd41c57db42305e0d4
Changes from upstream since last update:
4763662 mkvparser: fix type warnings
267f71c mkvparser: SafeArrayAlloc fix type warning
f1a99d5 mkvparser: s/LONG_LONG_MAX/LLONG_MAX/ for compatibility
bff1aa5 mkvparser: add msvc compatibility for isnan/isinf
Change-Id: Ie0375e564fc74b3b296744d0039830d2f77b83b6
See issue 1030. The value of frame_parallel_decoding_mode was ignored
in vp9 if refresh_frame_context was 0, so instead make it a 3-member
enum where the dependency is obviously stated.
Change-Id: I37f0177e5759f54e2e6cc6217023d5681de92438
In vp9, [0] and [1] had identical meaning, so merge them into a
single value. Make it impossible to code RESET_FRAME_CONTEXT_NONE
for intra_only frames, since that is a non-sensical combination.
See issue 1030.
Change-Id: If450c74162d35ca63a9d279beaa53ff9cdd6612b
1) copy following files from vpx_dsp/ to vp10/common/
vp10_inv_txfm.c
vp10_inv_txfm.h
vp10_inv_txfm_sse2.c
vp10_inv_txfm_sse2.h
2) change the function prefix "vpx_" to "vp10_" in above files
3) add unit test at vp10_inv_txfm_test.cc
Change-Id: I206f10f60c8b27d872c84b7482c3bb1d1cb4b913
This condition is not effectively in use. The actual reference
frame masking is done in other route.
Change-Id: Ia59c843bcac7243dada92f0f67658d7ce43df5e8
remove 'u' and specify all objects to allow objects with the same
basename to be added and a incremental rebuild to succeed
fixes issue #1067
Change-Id: Id0ebc89be826a026f1bbf21b4e32a2b1af45154d
Take out speed features that affect the compression performance
to simplify the coding route. This commit removes the motion field
mode search used in speed 3.
Change-Id: Ifdf6862cb1ece8261125a56d9d89bcef60758c00
WebM files could have CodecId missing in the track headers. Treat those files as
unknown input file type in vpxdec.
Fixes issue #1064.
Change-Id: I6c3bb7b4bd3a4f5c244312482a5996f8b68db3f3
avoid duplicating internal structures and include vp9_dx_iface.c
directly. these had fallen out of sync after the frame-parallel branch
merge.
Change-Id: I604cfbffa95abe2a1c8e906a696f32436b1422ed
this file needs to be reworked to remove the duplication of codec
internals + allow for divergence of vp9 and vp10
Change-Id: I6266b94ccfbc24dae30148f134804b52aa411b88
prevents an int -> vpx_img_fmt_t conversion warning with high-bitdepth
as it modifies the image format
Change-Id: Ie3135d031565312613a036a1e6937abb59760a7e
Access scaled reference frame in the sub8x8 rate-distortion
optimization loop only when the current test mode is an inter mode.
This prevents an ioc warning triggered by sending intra_frame index
to fetch scaled reference frame.
Change-Id: I6177ecc946651dd86c7ce362e3f65c4074444604
For 3 temporal layers, reduce somewhat the
cyclic_refresh_mode_max_mbs_perframe parameter, from 20% to ~14%.
Small increase in PSNR/SSIM metrics.
Change-Id: Ia216fa5474048f1ef7fe3db88cd60dfef2a1bf8a
Change settings for 1 pass CBR.
And only use SET_SVC control(s) if there is at least 1 layer (spatial or temporal).
This allows sample encoder to also work for 1 layer case.
Change-Id: I5b0a33c25afb2f24a3a8aa4ec8ade9afc87cd702
This commit allows the encoder to include sub8x8 inter mode with
scaled reference frame in the rate-distortion optimization scheme.
Change-Id: Ibbe9678801592826ef22566566dcdeeb008350d5
Sync the encoder's buffer offset calculation for sub8x8 block motion
compensated prediction with scaled reference frame to match the
decoder's behavior. This resolves an enc/dec mismatch issue when
sub8x8 inter mode with scaled is turned on.
Change-Id: I4bab3672b007a5ae0c992f8a701341892d2458b0
The fields are always coded in the frame itself, so there is never any
dependency on past frames. In practice, this fixes sign_bias being
ignored when error_resilient_mode=1.
See issue 1011.
Change-Id: I9d134ef6b445ced4d100fa735ce579855a0fa5af
the check performed within the while was redundant; simply place the
accumulation after all tiles are decoded.
Change-Id: I6a74e87257c775fd8bfc8ac4511e4a6ad8f18346
This is based on the original patch optimized for 32bit
platforms by Tamar/Ilya and now uses the x86inc style asm.
The assembly was also modified to support 64bit platforms.
Change-Id: Ice12f249bbbc162a7427e3d23fbf0cbe4135aff2
These frame types cannot make bitstream parsing depend on previous
frames, so the hypothetical combinations of e.g. keyframe=1 and
update_map=0 or keyframe=1 and temporal_update=1 are non-sensical.
Therefore, make it impossible to code such combinations in the vp10
bitstream header.
See issue 1044.
Change-Id: I3f0a83d5c7e3989541a469a909471424a285239d
If the encoder dynamic resize is triggered and change config()
is then called, it will reset the current (resized) codec width/height
back to the the config (unresized) width/height (which will then
prevent the resizing action from occurring in encoder_loop).
Avoid this by checking for a change in the config width/height
before resetting the cm->width/height.
Change-Id: Id9d50c0ee8a943abe4b6c72bbaa02d9696f93177
In VP9, the order for frame header was: [0] smooth, [1] regular, [2]
sharp, [3] bilinear. Per-block, the order was [0] regular, [1] smooth
and [2] sharp. For VP10, swap smooth/regular in the frame header so
that the block ordering and frame header ordering are interchangeable.
See issue #1046.
Change-Id: Ic9ec5964874375e40cd59bef50b489a76cbe4365
Unify the style of fdct4() fdct8() fdct16()
Add fdct32()
Add range_check() at each stage
Add unit test at ../../test/vp10_dct_test.cc
Change-Id: I9e912b2c5683862e65c5a21abc3e1c260cca4576
* changes:
test: limit the valid image size on OS/2
configure: add -Zhigh-mem to LDFLAGS on OS/2
configure: disable PIC on OS/2
Makefile: add $(STACKREALIGN) to CFLAGS for vp9_reconintra.c
x86inc.asm: fix NASM compilation
* changes:
Only build multithreaded functions on mt builds.
Don't build calc_psnr for high bit depth.
Enable missing dual lpf test
Remove unused VP10 functions.
Mark VP10 functions as 'INLINE'
Remove unused functions from test files
Only build append_negative_gtest_filter when it is used.
Add INLINE decoration to static test functions
* changes:
vp9_mcomp: make search functions private
vp9_mbgraph: use vp9_full_pixel_search(HEX)
vp9_temporal_filter: use vp9_full_pixel_search(HEX)
vp9_firstpass: make vp9_init_subsampling private
vp9_encoder: make vp9_alloc_compressor_data private
If either the encoder or the decoder is enabled, CONFIG_VP<N> will be
set. This simplifies the conditional and passes the chromium update
script when CONFIG_ values are passed in with 'yes' and 'no' values.
This was failing because it was checking against empty strings but
they are set to 'no'
Change-Id: I02ecd557210088ba1458cd0e89eead5666f6597a
Spatial/temporal svc code was removed. Verified using Borg test,
and the results before and after the change are matching.
Change-Id: I4c2ee5cd560428e3e50be02e57e5871ef4246390
For one pass CBR: only check for updating refresh_golden
if ext_refresh_frame_flags_pending is not set (i.e., == 0).
And move the resetting of ext_refresh_frame_flags_pending = 0
down to after the encode_loop (and account for dropped frames).
This is to prevent changing refresh_golden flga when the user
supplies the reference/update flags.
Change-Id: I4d87b3e705ba43f243667e367503b585c61e2a54
* changes:
Only build ssse3 filter functions on 64 bit
Clean up unused function warnings in vp8 encoder
Clean up unused function warnings in vp8 onyx_if.c
These were lost in the great sub pixel variance move of
6a82f0d7fb
Not having these functions caused a ~10% performance regression in
some realtime vp8 encodes.
Change-Id: I50658483d9198391806b27899f2c0d309233c4b5
previously any flags added while setting up the toolchain would
override the user selections; environment variables could be treated
similarly
Change-Id: Ibfcc644137d8e579af554d19a38d4020019a7a34
Mark functions in findnearmv.h, invtrans.h and setupintrarecon.h
with INLINE.
Hide function in postproc.h behind the same #if as it's callers.
Change-Id: Ic1e014a943d2aca280f137019218b9d4f1443d61
This is a leftover of the XMA code which was removed a long time ago.
Found while looking for unused functions.
Change-Id: I07a3d542ae55440af59380dcdcf9a6c11cdfcb75
This commit adds clamp of new vectors similar to the logic in RD loop.
Such clamp is not necessary from the perspective of VP8 bitstream, but
is added to improve ChromeCast mirroring's robustness.
Change-Id: I42f6adbc60ffce283b994869364230858632d6fa
For each block in pickinter: use average of four middle
pixels (instead of single pixel) to set skin map.
This can help a little in reducing false skin detection in
some cases.
Change-Id: Ic247af75e9c2948b08ab977a39e061adacd8ec97
In high bitdepth setting, the rate multipier may be set as 0. In
lossless mode, the RD cost would always be 0, resulting in bad
partition and prediction mode choices.
Change-Id: I297014dd8bfa8a07ff0ab480119f75678300ff68
This patch just fixes the test for the time being, but does not
actually solve the underlying issue, which still needs investigation.
Change-Id: I54a35de839723f5b499b57e38dd2bdd400adc427
Switch to use the normative (convolve8) filter for source scaling,
only for 1/2x1/2 scaling for now. This is faster and has better
quality than either the vpx_scale_frame or the nonnormative scaler.
Remove the vp9_scale_if_required_fast, which is now not used.
Change-Id: I2f7d73950589d19baafb1fa650eac987d531bcc8
Define it as a function of reference frame types to provide
scalability for multiple reference frames.
Change-Id: I77b856c96916f352bc31004b9266b3f24e19bd0f
this restores the previous version's behavior avoiding issues with
builds that may split sources on directory boundaries; protected
visibility may work in this case.
Change-Id: If37c70d9bd81de85a8e112457b9819a5cac6129d
For 1 pass CBR mode under screen content mode:
if pre-analysis (source temporal-sad) indicates significant
change in content, then check the projected frame size after
encode_frame(), and if size is above threshold, force re-encode
of that frame at max QP.
Change-Id: I91e66d9f3167aff2ffcc6f16f47f19f1c21dc688
Only test for using golden as reference for variance partition
selection if it is used as a reference for that frame.
For temporal layers, golden may not be a reference on a given frame,
even though it was for some previous frame. If it is not a reference
for current frame, don't check/use it for partition selection.
Change-Id: I6b0f2bd36aebbb5903077c9a0a66d80f1de9a7b1
CONFIG_VP9_HIGHBITDEPTH is currently used by both vp9 and vp10, but in
many place outside vp9/vp10, the macro was used in conjunction of
CONFIG_VP9. This created a dependency on vp9 for vp10 to build. This
commit removes the dependency by use CONFIG_VP9_HIGHBITDEPTH only in
these places.
Change-Id: I8cc007fc9cf132394c6498ce6759e606b64a6ad0
This commit renames the vp10 encoder, decoder, and common interface
file names from vp9_ prefix to vp10_ prefix.
Change-Id: Iafb5d786e4b428d2b9bf097123bd86c4fa9ded24
For speed 7, real-time mode: Base layer frames are further apart
(for #temporal layers = 3, this is every 4 frames) so worth keeping
same motion search parameters (as in speed 6) on the base layer frames.
Change-Id: Idebf49dda6ef4f3d9a55aee55129a68253f692fb
gcc-based builds will allow a 0-element array, but visual studio builds
will not; this change hides the encoder and decoder specific symbols as
modules using them are selected based on the configuration.
Change-Id: Ic16ba9d12241070ec689dc5880164c14a4f7ca44
* changes:
Only use .text sections for aout
Use newer x86inc.asm
Use .text instead of .rodata on macho
Copy PIC handling code from x86_abi_support
Set 'private_extern' visibility for macho targets
Avoid 'amdnop' when building with nasm
Catch all elf formats
Expand PIC default to macho64 and respect CONFIG_PIC from libvpx
Use libvpx defines to set name mangling rules
Customize x86inc.asm for libvpx
Rename updated version of x86inc.asm
Use "private_prefix" instead of "program_name" and make vpx the default
prefix.
Change-Id: I4883a99b2aee8e5dc9f2c16a2e6f4b5d6e4de458
The read only sections are getting stripped on some OS X builds. As a
result, random data is used in place of the intended tables.
Change-Id: I58c18a53e503f093ee268451698c5761e6c32540
Other implementations of x86inc.asm have more comprehensive nasm
workarounds. This is the only thing that was changed for the previous
import to libvpx. See if we can still get away with it.
Change-Id: I3ef6fe9a4816461c89431a82b7e4a08b4b948d39
Make sure all variants get correct visibility and SECTION notes.
libvpx only pass elf32 and elf64 to the assembler, never just elf.
Change-Id: I7c36c115bf52436c9afe61985c859a2081948271
Revision a95584945dd9ce3acc66c6cd8f6796bc4404d40d
from git://git.videolan.org/x264.git
Temporarily name file x86inc.asm until all necessary local patches are
applied.
Change-Id: I9c7d0ed4d3ed900ae2d5db0abbcc048a2892c9b8
Use the correct period (in terms of cr->percent_refresh) for the condition
of larger delta-qp following key frame.
And account for larger interval for temporal layers.
Change-Id: Ibb43f5200f9b1eeb8bbb8211327b08ecda3c3b8a
Re-investigated the second-level sub-pixel motion search. Improved the
way of choosing search points. Rewrote the second-level search code.
At speed 0, the borg tests showed:
1. for stdhd set, Avg PSNR gain: 0.216%; Overall PSNR gain: 0.196%;
SSIM gain: 0.206%. Only 1 out of 15 clips showed PSNR loss.
2. for derf set, Avg PSNR gain: 0.171%; Overall PSNR gain: 0.192%;
SSIM gain: 0.207%. Only 3 out of 30 clips showed PSNR losses.
Added the condition for third-point checking, namely, less points
were checked. Speed tests showed no speed loss(Avg 0.3% speedup at
speed 0).
Change-Id: I6284ebb3fa7ba63be8528184c49e06757211a7f1
when configuring with mips32-android-gcc HAVE_MIPS32 would be set, but the
ndk does not set -mips32r2 for APP_ABI=mips which results in BSwap32 failing
to build; refine the check in endian_inl.h
Change-Id: I22893fe61f29111eb902d961b500b2174596268d
The test file compiler fails if one uses --disable-vp8-decoder
--enable-vp9-decoder. It effectively turns on CONFIG_VP8 and
CONFIG_DECODERS, but turns off CONFIG_VP8_DECODER, which causes
compiler error at test_vector_test.cc.
This commit fixes this issue by adding vp8/9 decoder flags to
the decoder behavior test, respectively.
Change-Id: I097ff8fd5e12715a94a565a82e54503885eb7187
-For ambient qp in active_worst setting: increase the initial
averaging time (from very first frame) to account for avg_qp of key_frame.
-In postencode on key frame: update the last_q/avg_q[key_frame] for
all temporal layers.
Change-Id: I5313153d350b1045b4835ce948dfffb7d2039b52
Condition usage of rc.frames_since_golden to non-svc mode.
rc.frames_since_golden, which is used in non-svc mode to add second reference,
was causing, under certain condiiton, the turning off of golden reference
for svc case.
Change-Id: Icec644d235d0471e56d8ff73d6c37278bd6ecd3b
and FUN_CONV_2D macros. The predict lut now handles
this case. The encoder now calls vpx_scaled_2d() instead
of vpx_convolve8() for scaling.
Change-Id: Ia1c8af8a31e4cb4887a587143108cb45835f7df7
This reverts commit a5e97d874b.
Additionally:
Revert "vpx_convolve_copy_sse2: fix win64"
This reverts commit 22a8474fe7.
This change performs poorly on various x86_64 devices affecting
performance by 1-3% at 1080P. Performance on chromebook like devices was
mixed neutral to slightly negative, so there should be minimal change
there.
Change-Id: I95831233b4b84ee96369baa192a2d4cc7639658c
This commit clears all the vp9_ prefix use case in vpx_dsp. It gets
the vp9 folder ready to branch out vp10.
Change-Id: I2906eec179ee792b4af8c9b4161313653050e931
This commit clears the function naming convention in vpx_dsp. It
replaces vp9_ prefix of global functions with vpx_ prefix. It also
removes the vp9_ prefix from static functions.
Change-Id: I6394359a63b71a51dda01342eec6a3cc08dfeedf
Choose a different diagonal point to check when the two costs are
the same, making it consistent with the way we choose the best mv.
This slightly changes the encoding result, and the derflr set borg
test at speed 0 shows 0.027% Overall PSNR gain, 0.024% Avg PSNR
gain, and 0.043% SSIM gain.
Change-Id: Ic8ee3a6767394866d159e4f9e1c777604dd73c17
If the current best mv(namely, the search center) is still the best mv
after the first level search, the second level checks is skipped. This
patch doesn't change the bitstream. At speed 0, it speeds up the encoder
by 1% - 2%.
Change-Id: I054c91b884d3f7aef157436c061744562bd6506d
Add a guard to exclud dspr2 inverse transform files from vpx_dsp
make file, when high bit-depth is turned on. This fixes the jenkins
nightly build.
Change-Id: Ibacd86563af1ec4810c550905b3fa0397baeeafc
Changes:
b6de61a Adds support for simple tags
75a6d2d sample_muxer: Don't write huge files.
cec1f85 mkvmuxer: remove unused timecode_scale variable
8a61b40 Merge "mkvparser: Tiny whitespace fix."
7affc5c clang-format re-run
d6d04ac mkvmuxer: use generic Cluster::AddFrame
4928b0b Merge "mkvmuxer: Write Block key frames correctly."
c2e4a46 Merge "sample_muxer: Use AddGenericFrame to add frames."
e97f296 mkvparser: Tiny whitespace fix.
d66ba44 Merge "Add support to parse DisplayUnit."
deb41c2 Add support to parse DisplayUnit.
42e5660 Fix issues on EBML lacing block parsing
fe1e9bb Fix block parsing to not allow frame_size = 0
2cb6a28 Change assertions to checks when parsing TrackPositions
d04580f Fixes issues on Block Group parsing
c3550fd mkvmuxer: Write Block key frames correctly.
5dd0e40 Merge "mkvmuxer: Set is_key to true for metadata blocks."
8e96863 mkvmuxer: Set is_key to true for metadata blocks.
a9e4819 sample_muxer: Use AddGenericFrame to add frames.
5a3be73 Change assertions to checks when load CuePoints
f99f3b2 mkvmuxerutil::EbmlDateElementSize: remove value param
ff572b5 Frame::IsValid: fix track_number check
b6311dc mkvmuxer: Refactor to remove a lot of duplicate code
256cd02 Merge "mkvmuxer: DiscardPadding should be signed integer."
16c8e78 mkvmuxer: s/frame/data in all AddFrame* functions.
c5e511c mkvmuxer: DiscardPadding should be signed integer.
4baaa2c Add framework build script: iosbuild.sh
3d06eb1 PATENTS: fix a typo: constitutes -> constitute
d3849c2 mkvparser: Dead code removal.
f439e52 Change assertions to checks when preloading Cues
d3a44cd Fix track transversal when listing Cues on sample
c6255af Tweak .gitignore so git status is clean after checkout and
build: - added missing underscore to sample_muxer - added cmake and make
related files
b5229c7 Makefile.unix: s/samplemuxer/sample_muxer/
e3616a6 Add support to parse stereo mode, display width and display
height in mkvparser
a4b68f8 parser: Fix bug in Chapters::Atom::Parse()
bab0a00 cmake: Set library and project name the proper way on Windows.
feeb9b1 Set library name to match Windows expectations.
b9a549b Fix CMakefile to generate libwebm.a
b386aa5 Add CMakeLists.txt and msvc_runtime.cmake.
b0f8a81 parser: Fix memory leak in Chapter parsing
f06e152 mkvmuxer: Fix MoveCuesBeforeClustersHelper recursive call.
27bb747 allow subtitle tracks with ContentEncodings
623d182 DoLoadCluster: tolerate empty clusters
1156da8 Update PATENTS to reflect s/VP8/WebM/g
0d4cb40 mkvmuxerutil: Use rand() in MSVC builds.
e12fff0 mkvmuxer: Overload WriteEbmlHeader for backward compatibility
a321704 mkvmuxer: write correct DocTypeVersion
574045e mkvmuxer: fix DiscardPadding
8be6397 Include crop elements when calculating size of Video element
8f2d1b3 mkvparser: fix DiscardPadding extraction
1c36c24 mkvmuxer: fix style guide violations
568504e Merge "UUIDs can have their high bit set"
acf788b Add support for CropLeft, CropRight, CropTop and CropBottom
elements.
418188b Merge "muxer: codec_id is a mandatory element"
07688c9 mkvmuxer: Reject frames if invalid track number is passed.
2a63e47 muxer: codec_id is a mandatory element
d13c017 UUIDs can have their high bit set
Change-Id: Iba28acb1ff774349d03e565f2641ddea132cf1e7
fixes link under vs9; this is the same change as:
dbf6e3f gen_msvs_vcxproj.sh: Avoid object name collisions.
Change-Id: I2a188c9024d0605e60e5e03ddcef1a25e7e53585
Chromium puts all the yasm output in the same directory. Looking at ways
to improve this but in the meantime get rid of collisions.
Change-Id: I923c5231d14e895ab96521eb89807ede868a0753
Ssim_vars is used to accumulate stats based 4x4 pixel blocks, this
commit changes the allocations size to be based on mi_rows and mi_cols
to avoid out-of-bound memory access for larger size videos. The hard
coded 720x480 can only work for image size up to 2880x1920.
Change-Id: Id9d07f3f777385b448ac88a6034b7472e4cf3c79
This commit moves the module inverse transform functions from vp9
to vpx_dsp folder. The hybrid transform wrapper functions stay in
the vp9 folder, since it involves codec-specific data structures.
Change-Id: Ib066367c953d3d024c73ba65157bbd70a95c9ef8
This got erroneously changed during the refactor. This fixes
SvcTest.TwoPassEncode2TemporalLayersWithMultipleFrameContextsAndTiles.
Change-Id: Ifa5ab0e098396c5e2d10478db87df256eadfa4c7
This function suffers from a couple problems in small core(tablets):
-The load of the next iteration is blocked by the store of previous iteration
-4k aliasing (between future store and older loads)
-current small core machine are in-order machine and because of it the store will spin the rehabQ until the load is finished
fixed by:
- prefetching 2 lines ahead
- unroll copy of 2 rows of block
- pre-load all xmm regiters before the loop, final stores after the loop
The function is optimized by:
copy_convolve_sse2 64x64 - 16%
copy_convolve_sse2 32x32 - 52%
copy_convolve_sse2 16x16 - 6%
copy_convolve_sse2 8x8 - 2.5%
copy_convolve_sse2 4x4 - 2.7%
credit goes to Tom Craver(tom.r.craver@intel.com) and Ilya Albrekht(ilya.albrekht@intel.com)
Change-Id: I63d3428799c50b2bf7b5677c8268bacb9fc29671
It in essence refactors the code for both the interpolation
filtering and the convolution. This change includes the moving
of all the files as well as the changing of the code from vp9_
prefix to vpx_ prefix accordingly, for underneath architectures:
(1) x86;
(2) arm/neon; and
(3) mips/msa.
The work on mips/drsp2 will be done in a separate change list.
Change-Id: Ic3ce7fb7f81210db7628b373c73553db68793c46
Don't run rate_block (cost_coeffs) if distortion alone is enough to
surpass best_rd.
This decreases 2nd pass runtime on HD at speed 2 by about 2%. There is
zero effect on output if tx_cache is removed.
Change-Id: Ia3b1cc77bfbe6ee988c395fde06c0eb92940b784
1. The RD scores obtained during the tx size selection were stored in the
tx cache, and used to help make the tx decision for the following frames.
This wasn't used anymore in VP9 encoder. Recovered the related decision
making code from 1.5+ years ago, and borg tests didn't show any quality
gain. This patch removed it to lower the complexity.
2. An optimization was done after the above refactoring. If the tx_mode
is not TX_MODE_SELECT, we only need to test the chosen tx size instead
of all posible tx sizes. This gave a 1.5% average speed gain at speed 2,
and a 1% average speed gain at speed 3.
Change-Id: Id8cd650e066a8cef33829d8c15388a8138adc78c
The forward 32x32 2D-DCT functions are aligned in vpx_dsp folder.
The vp9_dct.h file is not effectively used now.
Change-Id: Ie7946b6fdd784b8e91496242337bc9002c75c281
Replace the duplicate coefficient definition in neon implementations
of inverse transform with those from vpx_dsp/txfm_common.h
Change-Id: I4cd9bd9569ab1793dfdbb6f16d80bcb581599f0d
This commit replaces vp9_idct.h with txfm_common.h in many SIMD
implementation files for precise file dependency.
Change-Id: If73dd726bb16537e7494f28538b0a169810f9756
Separate the common coefficient constant into vpx_dsp/txfm_common.h.
Move the SSE2 macro definitions to vpx_dsp/x86/txfm_common_sse2.h.
This clears the use case of vp9_idct.h in vpx_dsp folder.
Change-Id: I319735a2abf42888e5080ac14cfbcde34be7b121
requires r10e or newer:
Android NDK, Revision 10e (May 2015)
...
Other bug fixes:
...
- Fixed .asm support for ABI x86_64.
Change-Id: I51ec9a5f77c982b7412d922e896348a83ae2d7d6
Avoid scaling the references if they have already been scaled.
Change only affects 1 pass non-svc mode for now.
Change-Id: I204f4079c026cba7adce7a7f855d072f6139ccec
The RD and load save/code grabs it as groups of four. In practice there
is no change to physical allocations becaquse this is backed by a 16-byte
memalign.
Change-Id: I01e89769872300e23227e03dd24a6e229f482025
Add vpx_dsp_rtcd.h to the header file list. The od_bin_fdct8x8()
here depends on forward 8x8 2D-DCT.
Change-Id: I1d71edc71f07069808823d2445c1cafd285e1b94
This commit factors out common macro definitions from the forward
and inverse transform implementations into vpx_dsp. It removes
the duplicate macro definitions from encoder and decoder folders.
Change-Id: I92301acbd3317075e9c5f03328a25abb123bca78
This commit factors the 4x4, 8x8, and 16x16 2D-DCT forward
transform operations into vpx_dsp folder.
Change-Id: I084b117b79c0925edcbcabb93f62b9f4bf8dbe7d
vp9_itrans*_dspr2.c aren't necessary for high bitdepth builds and
notably vp9_itrans8_dspr2.c fails in various configurations using a
codesourcery toolchain:
vp9_itrans8_dspr2.c:31:5: can't find a register in class 'GR_REGS' while reloading 'asm'
Change-Id: I2ac76203e65cc643cb835ab50e95701896d92a1a
This test places 128 in positions that would not be found
in the VP9 filter tables. The ssse3 code packs this table
into chars and uses the pmaddubsw instruction, which treats
the value as signed. The ssse3 code checks for 128 in
position 3, skipping the ssse3 code if found, and calls
vp9_convolve8_c(). vp9_convolve8_c() is also used for scaling.
ChangeFilterWorks breaks the ssse3 scaling code found in other
commits.
Change-Id: I1f5a76834bc35180b9094c48f9421bdb19d3d1cb
Eliminates the byte by byte read from bool decoder, by reading
in a size_t and then shifting it into place.
Change-Id: I0ed8c7b6f942847e79cc90105dc1d2b5b3deb0d6
This commit limits the scope of 1-D DCT and ADST functions within
vp9_dct.c and makes them static. This largely clears out the cross
referencing issue between vp9_dct.c and the SIMD optimizations.
Change-Id: If7cac478b11bb32328ccf70a9f60b709dad43d7f
The SSE2 version high bit-depth forward hybrid transforms are
essentially using the C functions via cross referencing to 1-D
functions in vp9_dct.c. This commit unifies the two versions and
removes the unnecessary dependency.
Change-Id: Ib4d0702a138f8daf7d0bd97c141ee7088f293765
Separate the hybrid transform case from 2D-DCT case. This will
allow us to clear up cross dependency between c and SIMD
implementations later.
Change-Id: Iaa499e8b096850a1c5a0c50a3b6e63e15d0184bf
The following quantization functions were moved:
vp9_quantize_b
vp9_quantize_b_32x32
vp9_highbd_quantize_b
vp9_highbd_quantize_b_32x32
vp9_quantize_dc
vp9_quantize_dc_32x32
vp9_highbd_quantize_dc
vp9_highbd_quantize_dc_32x32
The purpose of doing that was to allow these functions to be shared
by multiple codecs.
Change-Id: Id8ab939f283353cdd07bd930d47db3d932a5d87f
This commit moves the loop filter dspr2 implementation from vp9 to
vpx_dsp directory. It also fixes header file format issues.
Change-Id: I09203ed4bd267d7fd76bb79a6ee84a37646206b2
Remove the use of drop_frames_water_mark, as this is used for
frame dropping control. Use fixed threshold for now on buffer underflow.
Change-Id: If0ddda9f7f6fa96067cdcb0eccb42e17bda37c32
For vp9 decoder build without profile 2 and profile 3 support, this
commit changes to report error "Unsupported bitstream profile" for
input streams in profile 2 or 3, rather than other misleading error
information.
In addition, one of the invalid files in unit tests is actually coded
profile 2, this commit makes it tested only when the decoder is built
with vp9-highbitdepth.
This fixes issue #1028.
Change-Id: I8b6c1210787c8f89c703a546687dcf973ac20fc0
The various tap loop filter operations are common functions across
codec. This commit moves them along with SIMD optimizations to
vpx_dsp folder.
Change-Id: Ia5fa0b2e5289cdb98467502a549c380b9c60e92c
In aq-mode=3 under a resizing action (i.e., resize_pending != 0),
force an update of the golden reference frame.
Change-Id: I14806f6db71b5f8c827678cc5e1fc913c138a9a4
Fix bug in setting this flag for animated content.
The bug did cause quality to increase because far
more frames are not boosted than boosted.
However, the speed trade off to gain is a lot less
favorable and the behavior was not as intended.
Change-Id: I89fb70419c88b26f40b3534de0481730a1b3fcfa
Move the clamp functions to vpx_dsp_common.h file. Clear out the
dependency of vp9_loopfilter_filters.c on vp9_common.h file.
Change-Id: I9c4b928bcd7f597106b5aa96354356d3775a3431
Use drop_frames_water_mark for threshold on buffer underflow,
and change threshold for resize down.
Change-Id: I2de19adce50abe9bcdc0b107528cec8cc1857fcc
The fast scaling for 1 pass mode was being used only on the
first frame after resizing event (because resize_scale_num/den
is set to 1 and only changed for first frame following resize event).
Change-Id: I723b63e21823eb858f25f5662d2bbe4f1842e61f
Proper use/update of resize_state and resize_pending to constrain
the total amount of downsizing to be at most one scale down, for now.
Change-Id: Id18fc32499f2fbdbec16728dcdc9e4eac09098f0
From Change Ibf0c30b72074b3f71918ab278ccccc02a95a70a0
There is still an issue relating to one animated test clip with repeat
patterns where this change effectively increase the default maximum
arf interval by +1. This can be examined seperately.
Change-Id: Idd01d5480fc45202d8a059a0c3afc0997cc5bdd1
Flaten the intra block decoding process. It removes the legacy
foreach_transformed_block use in the decoder. This saves cycles
spent on retrieving the transform block position.
Change-Id: I21969afa50bb0a8ca292ef72f3569f33f663ef00
This commit simplifies the intra block boundary condition logic.
It removes the block index from the argument set.
Change-Id: If00142512eb88992613d6609356dfd73ba390138
Eliminates the byte by byte read from bool decoder, by reading
in a size_t and then shifting it into place.
Change-Id: Id89241977103fc3b973e4ed172a5cbf246998e5d
The clamp calls with INT32_MIN and INT32_MAX have no effect at all on
int values passed in, therefore this commit removes those effectless
clamps and also adds more const intermediate results to make the code
more readable.
Change-Id: I66d8811f58bb74ec31cbec9a6c441983a662352e
Rework the inter mode transform block decoding loop. Replace the
block index with the row and col index as the input argument. It
saves function call to compute the row and col index according to
the block index and overall block size, and many if statements
associated with the transform block position relative to the coding
block. For the test bit-stream pedestrian_area 1080p at 5 Mbps,
the decoding speed goes up from 81.13 fps to 81.92 fps.
Note that the intra coded block decoding needs more refactoring
work than the inter ones. So keep it using foreach_transforme_block
as for now.
Change-Id: I5622bdae7be28ed5af96693274057f55ba9b4fb4
The encoder gets its dqcoeff from the context tree. In the decoder move
it to directly after MACROBLOCKD.
Change-Id: I46c9b76f26956a360d17de0b26ecb994dae34ecb
Even if the recode loop is not enabled for the current frame type
trap the case where the projected size of a a frame is above the
maximum allowed in recode_loop_test()
Change-Id: I453004694b8f8699e3c2a83252e9f83adccdda4e
Changes to allow more use of rectangular partitions at
speeds 1 and 2 for content classed by the first pass as
animation and for blocks near the active image edge.
This has quite a big impact in quality for the animated
test sequence but also hurts encode speed for speed 2.
For other content types the impact on both speed and
quality is small.
Added some plumbing for detection of internal vertical
image edges.
Change-Id: I3fc48de2349f8cb87946caaf0b06dbb0ea261a9a
Change speed features / behavior for split mode when there
is an internal active edge (e.g. formatting bars).
Remove some threshold constraints in rd code near the active
edge of the image.
Add some plumbing for left and right active edge detection.
Patch set 5. Limit rd pass through for sub 8x8 to internal active edges.
This takes away any speed penalty for most clips but keeps the enhanced
edge coding for the more critical case of internal image edges
Change-Id: If644e4762874de4fe9cbb0a66211953fa74c13a5
Replace block index with transform type in the argument list. This
allows to save an extra fetch to the prediction mode. For pedestrian
area 1080p coded at 5 Mbps with single tile, the average decoding
speed goes up from 80.55 fps (before the refactoring series) to
81.13 fps.
Change-Id: Icbebf84ce63c19c0c92f3690ed201f6c3eab7881
If the pre-selected partition size (from variance partition) is
32x32, also apply nonrd partition search for 32x32 and 16x16 size.
Overall small positive gain in metrics, average ~1%.
Some visual improvement, for lower resolutions.
Change-Id: I69cb425bda94f7d13d34c451ab30e9276335a30e
The decoding process handles detokenization and reconstruction per
transform block sequentially. There is no need to offset the dqcoeff
buffer according to the transform block index. This allows to
reduce the memory spill and improve cache performance.
Change-Id: Ibb8bfe532a7a08fcabaf6d42cbec1e986901d32d
This commit replaces the vp8_ prefixed subtract function with the
common vpx_subtract_block function. It removes redundant SIMD
optimization codes and unit tests.
Change-Id: I42e086c32c93c6125e452dcaa6ed04337fe028d9
inline the code directly in read_mv_component(), the only place where it
was being used; this removes a function call in a hot function
Change-Id: I66f99c0c9ce3bc310101dbca4a470f023cc6fb55
To aid version management for integration with ffmpeg by use
of:
#ifdef VPX_CTRL_<CTRL_ID>
...
#endif
Change-Id: If550e06de4d3aa3685881f312ce6a86fa9de083b
Adds two new vp9 parameters --min-gf-interval and --max-gf-interval
to enable testing based on frequency of alt-ref frames.
Also adds a unit-test to test enforcement of min-gf-interval.
For both these parameters the default value is 0, which indicates
they are picked by the encoder, based on resolution and framerate
considerations. If they are greater than zero, the specified
parameter is honored.
(Additional note by paulwilkins)
Note that there is a slight oddity in that key frames are also GFs and
considered part of GF only group. However they are treated as not
being part of an arf group because for arf groups the previous GF is
assumed to be the terminal or overlay frame for the previous group.
(end note)
Change-Id: Ibf0c30b72074b3f71918ab278ccccc02a95a70a0
This reverts commit a42df86c03.
this change causes MSA/VP9SubpelVarianceTest.Ref and
MSA/VP9SubpelVarianceTest.ExtremeRef failures under
mips32r5el-msa-linux-gnu and mips64r6el-msa-linux-gnu
Change-Id: I40b71a0b774eaeb31f66f795733f95cf360909f7
This reverts commit 61774ad1c4.
this change causes MSA/VP9SubpelAvgVarianceTest.Ref failures under
mips32r5el-msa-linux-gnu and mips64r6el-msa-linux-gnu
Change-Id: I7fb520c12b2a3b212d5e84b7619a380a48e49bb0
The vp9_lpf_vertical_16_dual function optimized for x86 32bit target. The hot code in that function was caused by the call to the transpose8x16.
The gcc generated assembly created uneeded fills and spills to the stack. By interleaving 2 loads and unpack instructions, in addition to hoisting the consumer
instruction closer to the producer instructions, we eliminated most of the fills and spills and improve the function-level performance by 17%.
credit for writing the function as well as finding the root cause goes to Erik Niemeyer (erik.a.niemeyer@intel.com)
Change-Id: I6173cf53956d52918a047d1c53d9a673f952ec46
Added code to reduce the minimum partition size searched
for super blocks at or straddling the edge of the image.
If the first pass has detected formatting bars the "active" edge
may not be the real edge.
Change-Id: I9c4bdd1477e60f162a75fac95ba6be7c3521e05c
Correct the ARF boost calculations to partly discount
inactive or very low energy regions of the image.
Examples (formatting bars and 0 energy areas of animated clips).
Change-Id: I241af058d10aba8c67a4deca36deb913047d4561
This commit moves the primitive multi-threading files from vp9
folder to vpx_thread, which will be accessible by all vpx codec.
Change-Id: Ib51e66e9c69801c10631fab56d35a0c0aaed5883
the max value of the lookup in expanded form is:
(((1 << 7) - 1) << 1) - 65 + 1 + 64 = 254
remove the clamp [0, 253] and add one table entry
Change-Id: I0b5d0c66702fdb0b8f1cc9ab9b0dac66326e85a6
to MB_MODE_INFO_EXT. This saves 36 bytes per 8x8 area for
both the decoder and encoder. (encoder has two MODE_INFO
buffers)
Change-Id: If006abb2224acaf326df3c2be09e77e967662107
Only do the check for resizing if the feature is selected
(i.e., resize_mode = RESIZE_DYNAMIC).
And modify condition for checking to be resize_count >= window,
(since framerate can change).
Change-Id: Idceb4e50956bb965a1492b4993b0dcb393c9be4d
only uint8 is required; each use only loads one value as a uint8
quiets a few type conversion warnings
Change-Id: I03dc0dc0eb01ac23a6e8673daa2b77c6c57bf1b0
- Change default real time speed to -6.
- Add vpxenc_vp9_webm_rt_multithread, which encodes
niklas_1280_720_30.y4m with 2 to 4 threads using 2 to 4
tile columns.
Change-Id: I4d86c3360aec67ae5d1ba82eb6e0f0be8068b5af
Reduce boost for segment#2 for low bitrates and low-res.
This change is to reduce the rate overshoot at low bitrates.
No change in behavior, except at the very low bitrates.
Change-Id: I0dbd9d3b6356da5804de94adf10fca6a7a8f8948
Keep the same transform cutoff and partition selection
for speed 5 as in speeds >=6 (non-rd speed settings).
Existing setting for key frame at speed 5 allowed transform size
up to 32x32 on key frames, and did not allow for 4x4 block partition size.
This created more visual artifacts on first few frames.
avgPSNR/overallPSNR/SSIM gains of 0.2/0.7/0.8 for rtc_derf(low-res) set,
and 0/0.7/1.1 gains for rtc set.
Change-Id: I8c139ec6c9bb74e14b4ffbad5f12e94f18a59c0b
configure.sh was setting some Mac OS X options for iOS targets, which
confuses the iOS 9 beta SDK in Xcode 7 when linking libraries.
Additionally, old armv6 media extensions were being enabled on iOS
when they're not needed (we always have Neon since iOS 6). These
broke on iOS 9 SDK which no longer assembles those instructions.
Change-Id: I4e4d2722392ead3382ce96289c03ef1e489799d6
skips testdata verification; useful with slow media or if the data was
retrieved via a separate call to testdata
Change-Id: Ifd97892cee6c04b0111874cc8071675e90ec852b
For speed 5 real-time mode, the selection of the partition size for
superblocks on the segment (aq-mode=3) uses the non-rd recursive
pick partition search, and can sometimes select 64x64.
For low resolutions, visually better to limit this to 32x32.
Change-Id: I69657a7ed8899f8b3cf8c9c318a2509c5c72c565
For screen content don't refresh a block at a quantizer higher than
it was last coded at. PReviosuly at realtime speeds the encoder had a
tendency to recode a block from GOLDEN with a higher Q than it was last
coded at.
Change-Id: Iacd561806c769dcce1a81b9827ffc70090f5ba18
Decision to scale down/up is based on buffer state and average QP
over previous time window. Limit the total amount of down-scaling
to be at most one scale down for now.
Reset certain quantities after resize (buffer level, cyclic refresh,
rate correction factor).
Feature is enable via the setting rc_resize_allowed = 1.
Change-Id: I9b1a53024e1e1e953fb8a1e1f75d21d160280dc7
There is a naming conflict in the chromium build system.
The rest of the variance functions will move to vpx_dsp soon.
Change-Id: Iff78da2aafb0d7380eda73e38d7dac72110a1e47
The internal behavior of block_yrd differs in high bit depth
settings from 8-bit one. This causes the assertion condition not
true for high bit depth.
Change-Id: I15dc02e7162d27cabe78c451941d769d488b1174
The overflow issue affects a variable that is only used in inter
mode. This commit fixes the ioc warning triggered in the intra
mode. It does not affect the compression performance.
Change-Id: I593d1b5650599de07f3e68176dd1442c6cb7bdbc
set_frame_size() is being called twice, once before entering
encode_encode_frame_to_data_rate(), and once again in that function.
No need to call it twice for one-pass mode.
Change-Id: I5fabaf0a90482d4f42cd89ef7ae1402c31aec600
This patch modified the thread creating code. When use_svc is true,
the number of threads created is decided by the highest resolution.
This resolved WebM issue 1018.
Change-Id: I367227b14d1f8b08bbdad3635b232a3a37bbba26
* changes:
vp9_decodeframe.h: remove unused prototype
vp9_decodeframe: move public funcs to end of file
vp9_decodeframe: reorder some functions
vp9_decodeframe: hide vp9_dec_build_inter_predictors_sb
This commit fixes a potential integer overflow issue in function
hadamard_16x16. It adds corresponding dynamic range comment.
Change-Id: Iec22f3be345fb920ec79178e016378e2f65b20be
the declaration containing the alignment in vp9_filter.h was removed in:
eb88b17 Make vp9 subpixel match vp8
fixes a crash in 32-bit builds
Change-Id: I9a97e6b4e8e94698e43ff79d0d8bb85043b73c61
If the frame size increases, the tile data buffer needs to be
re-allocated according to the number of tiles existing in current
frame. This patch makes the multi-tile encoding work in spatial
SVC usage case, and partially solved WebM issue 1018.
Change-Id: I1ad6f33058cf5ce6f60ed5024455a709ca80c5ad
vp9_init_dequantizer() was deleted in:
bdd249b Optimize the dequantization process on decoder side.
Change-Id: Iedb5b6a3a03964dd6901c1e3b2325194d94bc708
add a dependency on *_rtcd.h to ensure they're generated before
attempting to build the test files
Change-Id: Ibbbd1f6ea77912bfd297129e7c83b9a80923ea12
Reduce motion threshold and boost factor for second segment,
for low bitrates, at low resolutions for now.
This is to reduce the rate fluctuation/frame dropping that occurs
at these low bitrates.
Change-Id: Ia66c3be41831882fca8c1e4fe104f5ea8fbe7142
Some initial experiments into discounting dead zone
formating bars and intra skip blocks (common in some
types of animation and graphics) in the calculation of
the active max Q for each ARF/GF group.
TODO: check for vertical formating bars and validate the
horizontal bar at the bottom edge of the image.
As expected, this change as it stands, does not make much
difference for the natural videos in the std-hd and derf sets.
However, for the yt and yt hd set there is a significant rise
in the average PSNR with overall PSNR and SSIM remaining
neutral.
The mean rise for the YT-HD test set was > 6%. This is mainly
because the change allows Q to drop further on titles and
other graphics sections where spending a small number of
extra bits gives a sharp rise in PSNR.
Change-Id: I3f878ae91fc1854312d7ecf9fa792c17bc1aa6b7
For content that is identified as likely to contain some
animation or graphics content, increase the availability
of split modes for good quality speeds 1-3.
On a problem test animation clip this improves metrics
results by about 0.25 db and makes a noticeable difference
visually. It also causes a small drop in file size (~0.5%) but
a rise in encode time of about 5-6% at speed 2.
For more normal content it should have no effect.
Change-Id: Ic4cd9a8de065af9f9402f4477a17442aebf0e439
Added check to see if last frame was all intra. This will
eliminate two checks in find_mv_refs_idx(). Also, do not
update the frame mvs if the current frame is all intra.
This improved performance on material with frequent
intra-only frames.
Change-Id: I44a4042c3670ab0d38439d565062a0e2a1ba9d1e
fails unit tests:
[ FAILED ] NEON/VP8SubpelVarianceTest.ExtremeRef/0, where GetParam() = (3, 3, 0x14e36d, 0)
[ FAILED ] NEON/VP8SubpelVarianceTest.Ref/0, where GetParam() = (3, 3, 0x14e36d, 0)
the tests were recently enabled in:
eb88b17 Make vp9 subpixel match vp8
the functions likely haven't changed since being converted from assembly
Change-Id: I6141717b111b8f735f436c160d74270af53ef722
move them under their respective config check to avoid some unused
variable warnings when disabled
Change-Id: Ic5e5280cf1bc1f56e8349676f0bedae4acef34ea
this quiets warnings from armv6 code [1].
from msdn [2]:
-oldit
Generate ARMv7-style IT blocks. By default, ARMv8-compatible IT blocks
are generated.
a new configuration would be needed for armv8 in any case as the neon
assembly is being built, so removing this should be harmless
[1] A4509: This form of conditional instruction is deprecated
[2] https://msdn.microsoft.com/en-us/library/hh873189.aspx
Change-Id: I4c3b838b52a87401c6daecd83d22ab148ed7c5d9
This control allows the application to skip the loop filter in the
decoder. This is an advanced control that should only be used in
extreme circumstances as it may introduce and accumulate decode
artifacts.
Change-Id: I278c65c60826f84c9141ebe06c6eeed3c2335fa8
WebM files will adjust the display width and height according to the
input pixel aspect ratio. The default pixel aspect ratio is 1:1.
BUG=https://code.google.com/p/webm/issues/detail?id=1005
Change-Id: I23e0a601b7259fa9513cb86110c41b8437769808
calculate the averages needed for even and odd rows once; this removes a
conditional from the inner loop
the final average calculated currently relies on above[] being extended,
it could be reduced to use
above[block_size - 2] + 3 * above[block_size - 1]
Change-Id: I70f5eac8d8a2a959c7114844a95826f445c3dd4d
The only difference between the two was that the vp9 function allowed
for every step in the bilinear filter (16 steps) while vp8 only allowed
for half of those. Since all the call sites in vp9 (<< 1) the input, it
only ever used the same steps as vp8.
This will allow moving the subpel variance to vpx_dsp with the rest of
the variance functions.
Change-Id: I6fa2509350a2dc610c46b3e15bde98a15a084b75
Adds code to detect dead zone bars at the top and bottom
of reformatted letterbox video (note that the code only
looks at the top of the image and assumes any dead zone
is symmetrical). Use of this to adapt rate control etc.
will follow in a subsequent patch.
Also counts other blocks (excluding the dead zone) that
have no intra signal. The presence of a significant
number of such blocks can be used as a identify that the frame
may be artificial (e.g. animation, screen capture, graphics).
This patch contains plumbing only and does not use
the signal.
Change-Id: I59bc93529cd4065416cef773e405fda3ae006a20
Some places are using the unoptimized variance function. This was never
intended and does not fit into the optimization framework.
Change-Id: Id96238407aad03b0ffd4a46cd183555a026daedc
Updated sources according to improved version of common MSA macros.
Enabled respective convolve MSA hooks and tests.
Overall, this is just upgrading the code with styling changes.
Change-Id: If5ad6ef8ea7ca47feed6d2fc9f34f0f0e8b6694d
Clang adds alignment hints when casting up the loads/stores. Although
this should be safe for most paths, it's causing some crashes. Either
the source of the misalignment needs to be determined and adjusted or
the intrinsics need to be rewritten to avoid using the cast to load the
data.
BUG=817,892
Change-Id: Ia3aa824d6a4cd97e14325ff49dc730b6f85ec7e8
The larger internal variables are required for the intermediates
but RoundHighBitDepth brings them down to uint32_t/unsigned int.
Fixes type warnings in visual studio.
Change-Id: I48d35284d6cbde330ccdc1f46b6215a645d5eb00
Numerator was being range checked against the
denominator - preventing any frame rate slower
than 1 fps.
I've tested this on a Mac using using ffmpeg and
results are comparable to mp4 and ogg files generated
at the same time.
Not yet tested on Windows.
Johnny Klonaris
google@jawknee.com
Change-Id: Idb358dbc2e7dc000037880ede4a1b0df248a42c8
Updated sources according to improved version of common MSA macros.
Enabled idct MSA hooks and tests.
Overall, this is just upgrading the code with styling changes.
Change-Id: I1f488ab2c741f6c622b7a855388a202168082209
only the immediate above right pixel is needed; this removes a
conditional from the inner loop
the final average calculated currently relies on above[] being extended,
it could be reduced to use above[block_size - 2] + 3 * above_right
Change-Id: Ica4f2b8d25eec3ca1d6fa52ef0d4adc228eeea3f
Done little restructuring/styling changes to the sources like generic macro definitions, their use to reduce code lines, better code alignments etc.
Disabled all MSA hooks and tests
Change-Id: Ic6f2dce0b501f46b80c06c46c0fe2043d557b190
Keep the logic, transform size based on cyclic refresh and bsize,
(that was conditioned on VAR_PARTITION conditions) the same
for all speeds in non-rd mode (speeds >= 5).
No change to speeds >=6.
Small improvement for speed 5, ~0.5/1.5% gain for avg psnr/ssim.
Change-Id: If9c5657f3d30efd3c7f147166bba7cb69ea55114
In VS 2015 and higher snprintf is supplied and therefore vsnprintf
doesn't need to be defined. This also avoids problems caused by
_snprintf being different from snprintf.
This fixes a build break with VS 2015 and improves security.
Originally submitted via chromium by brucedawson@chromium.orghttps://codereview.chromium.org/1055603003
Additionally break this MSVC-specific tweak to a new file, which will
become the home of all such MSVC-specific things.
This requires adding a dependency on msvc.h to every example which uses
args.c and tools_common.h
Change-Id: I35b5f8e7ea00f6627403aabc9ea79b0412557a99
ROUND_POWER_OF_TWO has some poor side effects when used
with [u]int64_t such as doing the shifting in 32bits.
Change-Id: Ic85a19765cd316fb43657cb21c86f35ceb772773
Increase the 32x32 split threshold, to allow for more 32x32
at expense of 16x16. Visually looks somewhat better.
Change-Id: Ia1439c3a0dc2d7933468b88bd59266fcd9f03505
Break out the setting of the block variance split thresholds,
since they are locally modified, e.g., based on local/segment qp.
No change in performance.
Change-Id: I0a3238e6dab05140657539fc4bd27ac5ff7a554e
+ synchronize filter function signatures
this makes any intrinsics filters available for inlining and has the
side-effect of making those filters static, quieting missing-prototype
warnings.
Change-Id: I1908875caffa585bd4fc65aaf10d17a5e20cfb46
+ synchronize filter function signatures
this makes any intrinsics filters available for inlining and has the
side-effect of making those filters static, quieting missing-prototype
warnings.
Change-Id: I1cd55c9d52547793ad65aa90c7620f0e426edaa2
collect the vp9_convolve function definition macros there; this will
allow some relocation of functions from vp9_asm_stubs.c
Change-Id: Idadd117fa256dd48748379856973fd985b8204e8
This commit fixes the integral projection motion search crash when
frame resize is used. It fixes issue 994.
Change-Id: Ieeb52619121d7444f7d6b3d0cf09415f990d1506
reorder includes to avoid:
warning C4985: 'ceil': attributes not present on previous declaration.
this is the same workaround used in vp9/common/vp9_systemdependent.h
Change-Id: Ia10dd63de24f96fa1507a6179220e9d6ec774db6
Various header/test files had to be re-worked in order to
build "Remove cm parameter from vp9_decode_block_tokens()".
This patch reverts the "Remove cm" part and only contains
the re-worked header files.
Change-Id: I520958a88d1991fee988a3c784d0eac40e117a32
1. Check existing buffer sizes when re-allocate context buffers.
2. Don't need to set mi buffers to 0 during setup_mi.
Change-Id: I6b48b0e077a4d804312b605ad0dc34aec5795a6d
This patch provides a partial rapid feedback of bits
resulting from extreme undershoot.
Some improvement on some problem animated material
but in its current form only a small impact on the metrics results
of our standard test sets.
Change-Id: Ie03036ea8123bc2553437cb8c8c9e7a9fc5dac5d
This patch addresses two issues that can occur when the
encoder chooses to use a mixture of ARF and GF groups.
The first issue relates to a failure to reset the "ARF active" flag
correctly when transitioning from coding ARF groups to coding
GF groups. This caused some golden frames to be encoded
with an incorrect bit rate target as if they were ARF overlay frames.
The second issue relates to the encoding of a single short GF group
just before a key frame. Where the last group before a key frame
is an ARF group we expect the final frame before the key frame to
be an low data rate overlay frame. However, when the last group
is a GF group, the final frame before the key frame should be a normal
frame with a normal bit allocation. This issue had the potential to cause
a single poorly coded frame just before a key frame. If that key frame
were a forced key frame rather than a real scene cut, this might cause
pulsing.
Change-Id: Idf1eb5eaf63a231495a74de7899236e1ead9fb00
This allows rate control to react to content of current frame being encoded.
Enabling this feature via the setting: screen_content_mode = 2.
Change-Id: Ib2c6670551d96f4907495d5b7b76bb8c49e673db
this allows test_libvpx's simd caps check to be used; it also fixes a
link error on OS X with -fcommon.
Change-Id: I1a62a3e74ba06b8f3b37a22fcfdebf90c04ab289
in addition to <arch>/*. this will pick up tests defined with TEST()
instead of INSTANTIATE_TEST_CASE_P()
Change-Id: I0917741baac89d9ce857f4d4aa53790e8a0c6c12
split call of extend_and_predict() and return, fixes visual studio build
warning since:
0a80164 Move mc_buf to cut down size of MACROBLOCKD.
Change-Id: I7cdf712941ef773a07f038539cb8080dc27861cd
this file shouldn't be built directly, it is included in vp9_dct_sse2.c
to create a non-high-bitdepth and a high-bitdepth version
silences missing prototype warnings for the unused FDCT* functions
Change-Id: Ide6ff8c24ab31bdb0f833260505ae33660a1ad5b
this file shouldn't be built directly, it is included in vp9_dct_sse2.c
to create a non-high-bitdepth and a high-bitdepth version
silences missing prototype warnings for the unused FDCT32x32* functions
Change-Id: I0e38f16dae5ea1728de184ee2c89287d48675c51
this file shouldn't be built directly, it is included in vp9_dct_avx2.c
to create a non-high-bitdepth and a high-bitdepth version
silences missing prototype warnings for the unused FDCT32x32* functions
Change-Id: I4c19935c0e035b393be513bde735e9a78064a494
* changes:
vp9_subexp.h: add a missing prototype
vp9: add some missing includes
vp9 intrinsics: add vp9_rtcd include
vp9: correct some function signatures
vp9_variance_sse2: sync function signatures
vp9/encoder: make some functions static
vp9_dct_sse2: make some functions static
vp9_decodeframe.c: make a function static
Use the same settting as in speed >=6.
This will use same logic for tx_size selecton as in speed >=6,
which limits the transform size and reduces ringing artifact.
Also metrics go up on average with this change: ~2% for PSNR, ~10% for SSIM.
Change-Id: Ia2d50db236ae1cc72f742bfa6c9ec5ea50ff0e0a
* changes:
vp8/rdopt.h+onyx_int.h: add some missing prototypes
vp8: add some missing includes
vp8: make some functions static
vp8/common/variance*: add vp8_rtcd include
vp8_copy32xn: sync function signature
useful for speed testing / verifying individual function optimizations;
currently tests non-high-bitdepth VP9 intra predictors
Change-Id: Ibd247765e43a31894697d43f1d39d312e0ba2090
Add a check to make sure we have a decoded frame available
before copying its 'corrupt' flag.
(Originally submitted to the old repository by Alexander Voronov
as: https://gerrit.chromium.org/gerrit/#/c/74305/).
Change-Id: Iceb4686c785afb437b668015bf8818b18d60e0ce
Testing on another rate control patch reveals that in some
situations, where the encoder is flipping in and out of arf
mode, we get an encoder decoder mismatch.
Whilst it is still not clear why, skipping the last buffer
update seems to trigger the problem. Until I can establish
why, or if there is another underlying cause, I am reverting
this change.
This reverts commit e5112b3ae3.
Change-Id: I315c5200414de89458015823344b7367e9dd75ba
With the sad functions, and hopefully the variance functions soon,
moving to the vpx_dsp location, place the defines used in the
reference C code in a common location.
Change-Id: I4c8ce7778eb38a0a3ee674d2f1c488eda01cfeca
Basically just a warning, but disconcerting nonetheless. Removes this
output from the build:
Makefile:59: -x86_64-darwin13-gcc.mk: No such file or directory
Change-Id: Ibb379506352b2f613ef4a7b1ac47e9c95d0d1580
These targets no longer build (PPC support was removed from
libvpx). Remove the dead code and misleading help output.
BUG=https://code.google.com/p/webm/issues/detail?id=997
Change-Id: Ib35614806adeae970f3821da0d8dbcc54ab8d868
The computation of new metrics is not supported yet in highbitdepth
mode. This commit adds protection to make sure the computation is
done only when highbitdepth is not on. This protection shall be
revised when support of highbitdpeth computation is added.
This resolves the encoder crash when configured with both
--enable-internal-stats
--enable-vp9-highbitdepth
Change-Id: Id9f4bcc4fa26d9ca0e9eabade83f3f88a5b212e6
This patch fixed the following warning:
src\third_party\libvpx\source\libvpx\vp9\encoder\vp9_pickmode.c(1607) :
warning C6246: Local declaration of 'this_mode' hides declaration of the
same name in outer scope.
Change-Id: I1d93c4a47a13cb13089fec5bd61e8b58e6cd8d58
* changes:
vpxenc: make some functions static
vpxdec: make some functions static
tools_common.h: fix get_vpx_decoder_count() proto
tools_common.h: fix get_vpx_encoder_count() proto
tools_common.h: fix usage_exit() prototype
rename LIBVPX_TEST_BINS to LIBVPX_TEST_BIN and remove foreach usage.
this was a leftover from having multiple targets with their own (single)
object list; the use of LIBVPX_TEST_OBJS so widely makes extending these
loops difficult.
Change-Id: I61bda1b91acb43145609f04b8fe6e45ec4483e22
When aq-mode=3 is enabled, only for base layer frames should the
qp of the frame incorporate the segment delta-qp.
This was causing more rate mismatch for the enhancement layer frames
when running temporal layers with aq-mode=3 on.
Change-Id: I1c5e69d1ef8a51188af8696753c17fd8f67699b3
currently this needs to be 2x (NEED_ABOVERIGHT) the size of the largest
block (32) + 1 (for above_left). reduce the buffer size from 128 + 16
(alignment) to 64 + 16.
Change-Id: Idaca1806c7e1214e9437de24e15edc2ebf18f95d
The warning only happens in VP9 encoder's first pass due to src_mi
is not set up yet. But it will not fail the encoder as left_mi and
above_mi are not used in the first_pass and they will be set up again
in the second pass.
Change-Id: I0713b4660d71e229e196654cb0970ba6b1574f28
Where a frame appears to be a repeat of an earlier
frame or frame buffer, but the first pass code
does not anticipate this (usually because it is matching
the GF or ARF buffer not the last frame buffer), do not
update the last frame buffer.
This helps ensure that the content of the last frame buffer
is kept "different" where possible, and not updated to
match the GF or ARF. This is particularly helpful in some
animated sequences where there are groups of repeating
frames. Here it has quite a big impact. However, in most
of our standard test clips it has little or no impact.
Change-Id: I77332ee1a69f9ffc0c6080bfeb811c43fd8828e6
this macro was used inconsistently and only differs in behavior from
DECLARE_ALIGNED when an alignment attribute is unavailable. this macro
is used with calls to assembly, while generic c-code doesn't rely on it,
so in a c-only build without an alignment attribute the code will
function as expected.
Change-Id: Ie9d06d4028c0de17c63b3a27e6c1b0491cc4ea79
Using EIGHTTAP and EIGHTTAP_SMOOTH seem sufficient.
Hard to see any visual gain from allowing EIGHTTAP_SHARP, and it is
rarely selected.
PSNR/SSIM metrics go up by ~0.18/0.14%.
Change-Id: I96fa0d98f9321b913e3ebcd464d4ff3c63018791
Create a new component, vpx_dsp, for code that can be shared
between codecs. Move the SAD code into the component.
This reduces the size of vpxenc/dec by 36k on x86_64 builds.
Change-Id: I73f837ddaecac6b350bf757af0cfe19c4ab9327a
Added the intra mode early termination in order to
speed up the mode search in non-rd case since we
started to include more intra modes in the search
list. Borg tests(rtc set) showed a 0.048% PSNR gain
and 0.061 SSIM gain. No speed change.
Change-Id: I6f255fe534dc50b736e6a66a726ad458eb9b4443
widen the loads and stores to 128-bit.
this was added, but not enabled in:
493a857 Add some sse2 code for intra prediction.
Change-Id: I277d7db608a7db7d75cc0bde86f48fa66ad487e4
For non-rd mode (speed >=5): use mask based on prediction block size, and
(for non-screen content mode) allow for checking horiz and vert intra modes
for blocks sizes < 16x16.
Avg psnr/ssim metrics go up by about ~0.2%.
Only allowing H/V intra on block sizes below 16x16 for now, to keep
encoding time increase very small, and also when allowing H/V on 16x16 blocks,
metrics went down on a few clips which need to be further examined.
Change-Id: I8ae0bc8cb2a964f9709612c76c5661acaab1381e
Impose a limit on the rd auto partition search based on
the image format. Smaller formats require that the search
includes includes a smaller minimum block size.
This change is intended to mitigate the visual impact of
ringing in some problem clips, for smaller image formats.
Change-Id: Ie039e5f599ee079bbef5d272f3e40e2e27d8f97b
Remove one of the auto partition size cases.
This case can behaves badly in some types of animated content
and was only used for the rd encode path. A subsequent patch
will add additional checks to help further improve visual quality.
Change-Id: I0ebd8da3d45ab8501afa45d7959ced8c2d60ee4e
Previously limit on max interval set to 0.5 seconds.
Though this helped some low frame rate material it
appears to be a bit too aggressive for some 24 and 25 fps
content. This patch relaxes the limit to 0.75 seconds.
The patch also adds a new minimum interval variable
to replace the current hard wired value. This allows us
to impose a limit on the maximum number of primary
arfs per second for high frame rate (e.g. 50 & 60fps)
content. This is to address concerns regarding playback
performance on some platforms if there is a high base
frame rate and very frequent arfs.
Change-Id: I373e8b6b2a8ef522eced6c6d2cceb234ff763fcf
offsetting by a variable stride prevents instruction reordering,
resulting in poor assembly.
additionally reroll 16x16/32x32 loops to reduce register spill with this
new format
Change-Id: I0635b8ba21ecdb88116e927dbdab53acdf256e11
This patch reduced the BLOCK_8X8's intra_cost_penalty, which
allows 8x8 blocks to conduct intra mode search. Borg test
result(rtc set): 0.077% PSNR gain, 0.228% SSIM gain. No speed
changes.
Change-Id: Icfe90c4f6969de24bda8ecacbd3da50330bf22b2
The rotation computation using 2X of cos(pi/16) has a potential to
overflow 32 bit, this commit disable the function to allow further
investigation and optimization.
Change-Id: I4a9803bc71303d459cb1ec5bbd7c4aaf8968e5cf
Calculated cpi->vbp_threshold_sad from this frame's dequant value.
The encoding quality and speed didn't change much. Borg test
result: PSNR: -0.002%, SSIM: -0.003%.
Change-Id: I97c9826986f39582f29910d637d08a69c90afdee
The version is currently producing different result from c version
for some input. Disable the use of it for now to allow time for
investigation the source of mismatch.
Change-Id: Id039455494ee531db4886a9f1fa4761174ef6df3
The default golden frame interval was doubled. After encoding a
frame, the background motion was measured. If the motion was high,
the current frame was set as the golden frame. Currently, the
changes were applied only while aq-mode 3 was on.
Borg tests(rtc set) showed a 0.226% PSNR gain and 0.312% SSIM gain.
No speed changes.
Change-Id: Id1e2793cc5be37e8a9bacec1380af6f36182f9b1
structured extended feature flags require eax = 7; avoids incorrectly
detecting avx2 on some older processors that support avx.
from [1]:
INPUT EAX = 0: Returns CPUID’s Highest Value for Basic Processor
Information and the Vendor Identification String
[1] http://www.intel.com/content/www/us/en/processors/processor-identification-cpuid-instruction-note.html
Change-Id: I6b4735b5f7b7729a815e428fca767d1e5a10bcab
For color sampling format other than 420, valid partion size in Y may
not work for UV plane. This commit adds validation of UV partition
size before select the partition choice.
This fixes a crash for real time encoding of 422 input.
Change-Id: I1fe3282accfd58625e8b5e6a4c8d2c84199751b6
(see I3a05cf1610679fed26e0b2eadd315a9ae91afdd6)
For the test clip used, the decoder performance improved by ~2%.
This is also an intermediate step towards adding back the
mode_info streams.
Change-Id: Idddc4a3f46e4180fbebddc156c4bbf177d5c2e0d
The existing test was triggering a lot of false positives on some types
of animated material with very plain backgrounds. These were triggering
code designed to catch key frames in letter box format clips.
This patch tightens up the criteria and imposes a minimum requirement
on the % blocks coded intra in the first pass and the ratio between the
% coded intra and the modified inter % after discounting neutral (flat)
blocks that are coded equally well either way.
On a particular problem animation clip this change eliminated a large
number of false positives including some cases where the old code
selected kf several times in a row. Marginal false negatives are less
damaging typically to compression and in the problem clip there are now
a couple of cases where "visual" scene cuts are ignored because of well
correlated content across the scene cut.
Replaced some magic numbers related to this with #defines and added
explanatory comments.
Change-Id: Ia3d304ac60eb7e4323e3817eaf83b4752cd63ecf
vestigial. the code is stale and couldn't be configured directly; there
are better ways to achieve this now
Change-Id: I5a9c62e099215588cd0d7e5ae002dfc77c21a895
PSNR HVS is a human visual system weighted version of SNR that's
gained some popularity from academia and apparently better matches
MOS testing.
This code is borrowed from the Daala Project but uses our FDCT code.
Change-Id: Idd10fbc93129f7f4734946f6009f87d0f44cd2d7
When the tokenization is not taking effect, the tokenization
pointer remains unchanged. No need to re-assign the backup pointer
value.
Change-Id: I58fe1f6285aa3b4a88ceb864c11d5de8ac6235dd
This partially reverts commit 14ef4aeafb
Including the rtcd headers to get the function definitions causes
problems on VS9.
Change-Id: I780874d9e03af2d3124192ab0e3907301f22674c
This patch limits the maximum arf interval length to
approximately half a second. In some low fps animations in
particular the existing code was selecting an overly long interval
which was hurting visual quality. For a sample problem test clip
(360P animation , 15fps, ~200Kbit/s) this change also improved
metrics by >0.5 db.
There may be some clips where this hurts metrics a little, but the
worst case impact visually is likely to be less than having an
interval that is much too long. On more normal material at 24
fps or higher, the impact is likely to be nil/minimal.
Change-Id: Id8b57413931a670c861213ea91d7cc596375a297
nothing is using android/log.h currently; also quiets a warning when
building a static lib:
Android NDK: WARNING:libvpx/build/make/Android.mk:vpx: LOCAL_LDLIBS is
always ignored for static libraries
Change-Id: I1469a5d6fca4f7338a4a82e26a03e60fc91d92ca
for big endian disable msa
removed -flax-vector-conversion flag
disable runtime_cpu_detect feature if enabled
Change-Id: Icd5130b733f2ddcdb94ffb6e4d170e6ca0f9832b
Force split on 16x16 block (to 8x8) based on the minmax over the 8x8 sub-blocks.
Also increase variance threshold for 32x32, and add exit condiiton in choose_partition
(with very safe threshold) based on sad used to select reference frame.
Some visual improvement near moving boundaries.
Average gain in psnr/ssim: ~0.6%, some clips go up ~1 or 2%.
Encoding time increase (due to more 8x8 blocks) from ~1-4%, depending on clip.
Change-Id: I4759bb181251ac41517cd45e326ce2997dadb577
Refactor the loops in dec_build_inter_predictors to try and decrease
the number of instructions. Limited testing saw about 1% perf
increase on x86 and about 0.67 % perf increase on Arm.
Change-Id: I69cfe6335bb562fbaaebf43fb3f5c5a2a28882a2
add a check for the status line to awk and better report failure given
the program output will be lost in this case
Change-Id: I1348a80108c81099d609f2e2227dd2c31bd8cd54
Modifies a special handling that improves rate control accuracy in
the constrained quality mode, when the undershoot and overshoot
limits are set tighter.
Change-Id: If62103f0ef3ed1cac92807400678c93da50cf046
the sse4 code expects 16-byte aligned arrays; vp8 already had a similar
change applied:
b2aa401 Align SAD output array to be 16-byte aligned
Change-Id: I5e902035e5a87e23309e151113f3c0d4a8372226
Skip redundant prediction filter type cost in filter search loop,
if the rate value will be reset in Hadamard transform based rate
distortion estimate.
Change-Id: Ie5221f4bc8da9461c449df367251aeeac52c6e5d
Reset the reached_eos flag in webm_guess_framerate in case it ends
up consuming the entire file. Also adding a vpxdec shell test to
verify this behavior.
Change-Id: I371eebd2105231dc0f60e65da1f71b233ad14be5
* changes:
vp8_regular_quantize_b_sse2: remove dead init
vp8cx_pick_filter_level*: remove dead inits
vp8_decode_frame: remove dead increment
rdopt: remove dead stores
find_next_key_frame: remove dead init & store
multiframe_quality_enhance_block: remove dead stores
vp8_print_modes_and_motion_vectors: remove dead stores
This commit turns on the Hadamard transform based rate distortion
estimate for all block sizes in RTC coding mode. It conditionally
skips the rate distortion estimation if all zero block flag is set
on. No significant encoding speed change is observed. The
compression performance of speed -6 is improved by 1.7% over using
it only for block sizes of 32x32 and below.
Change-Id: I768145e6f05c737b05b5b5f1ee674e929532cafb
The threshold scaling factor was calculated wrong using partition
size "bsize". Thank Yaowu for pointing it out. It was fixed and no
speed change was seen.
Change-Id: If7a5564456f0f68d6957df3bd2d1876bbb8dfd27
The following functions use the count parameter to either loop or select
dedicated paths:
vp9_lpf_horizontal_16_c
vp9_lpf_horizontal_16_sse2
vp9_lpf_horizontal_16_avx2
vp9_lpf_horizontal_16_neon
vp9_highbd_lpf_horizontal_16_c
vp9_highbd_lpf_horizontal_16_sse2
Change-Id: I7abfd2cb30baa292b4ebe11c847968481103c037
This commit accounts for the transform block end of coefficient flag
cost in the RTC mode decision process. This allows a more precise
rate estimate. It also turns on the model to block sizes up to 32x32.
The test sequences shows about 3% - 5% speed penalty for speed -6.
The average compression performance improvement for speed -6 is
1.58% in PSNR. The compression gains for hard clips like jimredvga,
mmmoving, and tacomascmv at low bit-rate range are 1.8%, 2.1%, and
3.2%, respectively.
Change-Id: Ic2ae211888e25a93979eac56b274c6e5ebcc21fb
The vbp thresholds are set seperately for boosted/non-boosted
superblocks according to their segment_id. This way we don't
have to force the boosted blocks to split to 32x32.
Speed 6 RTC set borg test result showed some quality gains.
Overall PSNR: +0.199%; Avg PSNR: +0.245%; SSIM: +0.802%.
No speed change was observed.
Change-Id: I37c6643a3e2da59c4b7dc10ebe05abc8abf4026a
remove incorrect specializations in rtcd and update a configuration
check in partial_idct_test.cc
(cherry picked from commit 8845334097)
Change-Id: I20f551f38ce502092b476fb16d3ca0969dba56f0
To enable us to the scale-invariant motion estimation
code during mode selection, each of the reference
buffers is scaled to match the size of the frame
being encoded.
This fix ensures that a unit scaling factor is used in
this case rather than the one calculated assuming that
the reference frame is not scaled.
(cherry picked from commit 8d8d7bfde5)
Change-Id: Id9a5c85dad402f3a7cc7ea9f30f204edad080ebf
This commit separates Hadamard transform/quantization operations
from rate and distortion computation in block_yrd. This allows one
to skip SATD computation when all transform blocks are quantized
to zero. It also uses a new block error function that skips
repeated computation of sum of squared residuals. It reduces the
CPU cycles spent on block error calculation in block_yrd by 40%.
Change-Id: I726acb2454b44af1c3bd95385abecac209959b10
This commit allows the quantizer to compare the AC coefficients to
the quantization step size to determine if further multiplication
operations are needed. It makes the quantization process 20% faster
without coding statistics change.
Change-Id: I735aaf6a9c0874c82175bb565b20e131464db64a
For large partition blocks(block_size > 32x32), the variance
calculation is modified so that every 8x8 block's variance
is stored during the calculation, which is used in the
following transform skipping test. Also, the variance for
every tx block is calculated. The skipping test checks all tx
blocks in the partition, and sets the skip flag only if all tx
blocks are skippable. If the skip flag of Y plane is 1, a
quick evaluation is done on UV planes. If the current partition
block is skippable in YUV planes, the mode search checks fewer
inter modes and doesn't check intra modes.
The rtc set borg test(at speed 6) showed that:
Overall psnr: -0.527%; Avg psnr: -0.510%; ssim: -0.573%.
Average single-thread speedup on rtc set was 3.5%.
For 720p clips, more speedups were seen.
gipsrecmotion: 13%
gipsrestat: 12%
vidyo: 5 - 9%
dark: 15%
niklas: 6%
Change-Id: I8d8ebec0cb305f1de016516400bf007c3042666e
sse4 isn't set by configure or used in rtcd, correct the sad entries to
use sse4_1 without changing the signatures for now.
this was done in vp8 post-vp9 branch.
Change-Id: Ia9f1fff9f2476fdfa53ed022778dd2f708caa271
exclude files that only contain functions for non-high-bitdepth builds.
this removes some warnings related to missing prototypes
Change-Id: Ic6642998c46a7b808c6c53b2f9c34bcd4d037abe
This commit allows the encoder to check the eob per transform
block to decide how to compute the SATD rate cost. If the entire
block is quantized to zero, there is no need to add anything; if
only the DC coefficient is non-zero, add its absolute value;
otherwise, sum over the block. This reduces the CPU cycles spent
on vp9_satd_sse2 to one third.
Change-Id: I0d56044b793b286efc0875fafc0b8bf2d2047e32
When the estimated rate-distortion cost of skip coding mode is
lower than that of sending quantized coefficients, allow the
encoder to drop these coefficients. This improves the compression
performance of speed -6 by 0.268% and makes the encoding speed
slightly faster.
Change-Id: Idff2d7ba59f27ead33dd5a0e9f68746ed3c2ab68
This commit fixes the SSE2 version 8x8 Hadamard transform
alignment and makes it consistent with the C version.
Change-Id: I1304e5f97e0e5ef2d798fe38081609c39f5bfe74
This commit replaces the 16x16 2D-DCT transform with Hadamard
transform for RTC coding mode. It reduces the CPU cycles cost
on 16x16 transform by 5X. Overall it makes the speed -6 encoding
speed 1.5% faster without compromise on compression performance.
Change-Id: If6c993831dc4c678d841edc804ff395ed37f2a1b
This commit makes the encoder to select between SATD/variance as
metric for mode decision. It also allows to account chroma
component costs for mode decision as well. The overall encoding
time increase as compared to variance based mode selection is about
15% for speed -6. The compression performance is on average 2.2%
better than variance based approach, with about 5% compression
performance gains for hard clips (e.g., jimredvga, nikas720p, and
mmmoving) at lower bit-rate range.
Change-Id: I4d04a31d36f4fcb3f5f491dacd6e7fe44cb9d815
This commit uses Hadamard transform based rate-distortion cost
estimate for rtc coding mode decision. It improves the compression
performance of speed -6 for many hard clips at lower bit-rates.
For example, 5.5% for jimredvga, 6.7% for mmmoving, 6.1% for
niklas720p. This will introduce extra encoding cycle costs at
this point.
Change-Id: Iaf70634fa2417a705ee29f2456175b981db3d375
webm_read_frame assumes that it won't be called once end of file
is reached. But for frame parallel mode that turns out to be not
true. this patch fixes that behavior by checking for EOS and
returning the appropriate value for subsequent calls.
Change-Id: Ie2fddbe00493a0f96c4172c67be1eb719f0fe8ed
Metrics on RTC set go down by ~1.5% on average.
Key frame encoding time goes down by factor of ~5.
Change-Id: Ia83acc55848613870e5ac6efe7f3d904d877febb
To enable us to the scale-invariant motion estimation
code during mode selection, each of the reference
buffers is scaled to match the size of the frame
being encoded.
This fix ensures that a unit scaling factor is used in
this case rather than the one calculated assuming that
the reference frame is not scaled.
Change-Id: Id9a5c85dad402f3a7cc7ea9f30f204edad080ebf
this matches the other includes and simplifies include paths in builds
from source
(cherry picked from commit 7999c07697)
Change-Id: I344902c84f688ef93c9f3a53e7c06c30db49d8d3
Set the GF group adaptive max Q compile flag to 1 by default.
This change has a quite big visual impact in some clips and also
contributes to tighter rate control.
For short test clips that have consistent content the impact is
quite small on metrics but for more varied long form clips there is
a drop in overal psnr but a sharp rise in average psnr caused by
greater expenditure on some easier sections and tighter rate clipping
in hard sections.
In chunck'ed encodes some of the effect will already be present due
to the independent rate control in each chunk but this change takes
the control down to a smaller scale.
yt hd +10.67%, - 3.77%, -1.56%
yt +9.654%, - 3.6%, - 1.82%
std hd +0.25%, -0.85%, -0.42%
derf +0.25%, - 1.1%. - 0.87%
Change-Id: Ibbc39b800d99d053939f4c6712d715124082843e
1. skip near if it is same as nearest
2. correct rounding for converting mv to fullpel position
3. update pred_mv_sad after new mv search.
Overall .1%~.25% compression gains on rtc set for speed 5, 6, 7, 8.
Change-Id: Ic300ca53f7da18073771f1bb993c58cde9deee89
Revised adjustment for rd based on source complexity.
Two cases:
1) Bias against low variance intra predictors
when the actual source variance is higher.
2) When the source variance is very low to give a slight
bias against predictors that might introduce false texture
or features.
The impact on metrics of this change across the test sets is
small and mixed.
derf -0.073%, -0.049%, -0.291%
std hd -0.093%, -0.1%, -0.557%
yt +0.186%, +0.04%, - 0.074%
ythd +0.625%, + 0.563%, +0.584%
Medium to strong psycho-visual improvements in some
problem clips.
This feature and intra weight on GF group length now
turned on by default.
Change-Id: Idefc8b633a7b7bc56c42dbe19f6b2f872d73851e
This experiment biases the rd decision based on the impact
a mode decision has on the relative spatial complexity of the
reconstruction vs the source.
The aim is to better retain a semblance of texture even if it
is slightly misaligned / wrong, rather than use a simple rd
measure that tends to favor use of a flat predictor if a perfect
match can't be found.
This improves the appearance of texture and visual quality
on specific test clips but is hidden under a flag and currently
off by default pending visual quality testing on a wider Yt set.
Change-Id: Idf6e754a8949bf39ed9d314c6f2daaa20c888aad
The joint_motion_search function alternates prediction
between two reference frames. In order to reuse existing
code, a pointer to the appropriate reference frame is
written into xd->plane[0].pre[0], that the motion
estimation code assumes points to the reference frame.
If this first reference frame was scaled then the
pointer was incorrectly being reset to point to the
unscaled reference frame rather than the scaled
version.
Change-Id: I76f73a8d8f4f15c1f3a5e7e08a35140cdb7886ab
While CONFIG_INTERNAL_STATS=1, PSNR is calculated while encoding.
The aligned width/height were used mistakenly in the calculation.
This patch fixed it, and used the orignal image width/height.
Change-Id: Iad5334f8693af761b71ebb78f2587db8a3404ecf
the TODO around CONFIG_SPATIAL_SVC has been resolved by changing the
CONFIG_* checks to use an ABI based check
Change-Id: If2638baf361b863186177a453beec9af9231e69e
this removes the CONFIG_* checks from public headers, but means
'--enable-experimental --enable-spatial-svc' builds will fail without a
local change to the ABI in vpx_encoder.h. this should be all right for
testing this experiment.
Change-Id: Ief55e7b9d1e8332cfce990275e04c29b30af0c4a
add explicit returns in cases where ASSERT_* can't be used due to the
function returning a value; retain the EXPECT_* for reporting purposes.
Change-Id: I1f514728537fee42a99277d3aba538e832d3b65b
Factor in segment#2 and skip blocks into the postencode estimated bits,
and increase somewhat the aggressiveness of the refresh.
PSNR/SSIM Metrics on RTC set go up by ~0.8/0.5%.
Change-Id: I5d4e7cb00a3aefb25d18c88b6b24118b72dc5d51
This commit makes the encoder to explicitly calculate the SAD
associated with the LAST_FRAME motion vector and compare it to
that of the GOLDEN_FRAME given by integral projection motion
estimation. It skips the expensive sub-pixel motion search over
GOLDEN_FRAME when the LAST_FRAME can provide fairly good motion
compensated prediction quality.
For dark720p speed -6 single thread goes from
33304 b/f, 40.070 dB, 18156 ms ->
33319 b/f, 40.061 dB, 17611 ms
Change-Id: I01bc94b9b598075567a392111046b97a9bc30efe
Because the call to vpx_codec_control at line 928 is now guarded by
!frame_parallel, 'corrupted' may not be set.
Change-Id: Id166bd8a8cdb5e5120fca1640011a3545f6e178a
Use force_split to constrain the partition selection.
This is used because in the top-down approach to variance partition,
a block size may be selected even though one of its subblocks may have
high variance.
In this patch the selection of the 64x64 block size will only
be allowed if the variance of all the 32x32 subblocks are also below the threshold.
Stil testing, but some visual improvement for areas near slow moving boundary
can be seen. Metrics for RTC set increase by about ~0.5%.
Change-Id: Iab3e7b19bf70f534236f7a43fd873895a2bb261d
Shut off all the metric checks for golden reference frame, if we
decide that it is unlikely to be selected for reference.
Change-Id: Ie457cc1fd43935584403b4982659aed80fb9909c
Move the scaling factor outside column projection. This avoids
repeated calculation of the same scaling factor. Profiling shows
that the percentage of vp9_int_pro_col_sse2 of overall cycles
goes from 2.29% down to 1.88%.
Change-Id: I5ac4e324ab2d7f33ba2de66dd2a12e04e04dfd66
1. remove duplicate initialization to mbmi->interp_filter.
2. move mv clamping into ref_frame loop instead of mode checking loop.
3. move the check if last frame is same as golden frame earlier to
avoid initialization of Golden reference related variables.
Change-Id: Idf2d05e19e94a24f69cc289687869fc71d2ff289
use \li to separate the list items contained in conditionals. this
avoids the encode page becoming a sub-item of decode; likely a problem
in <1.8.3.
+ fix encoder conditional, spelling error
+ correct encode page name to match decode 'Encoding'
Change-Id: I67890f52bed8e708bad63fb8819a074e0beff2ca
use \li to denote list items with \if.
fixes the following likely visible in <1.8.3:
usage.dox: warning: Invalid list item found
usage.dox: warning: End of list marker found without any preceding list items
Change-Id: I33c72799edf9f8866596ac8f79247050b8c75681
The compression performance of speed -5 is on average 12.6% better
than speed -6. At lower bit-rates, the gains are typically 20% or
more. For 2-thread encoding, the speed -5 takes about 1.6x time of
speed -6.
Change-Id: If7a73464a24d33e8f49b9533b51ec51c8da7fc80
The commit updates the comments in vp8cx.h to make it clear which
codec support each of codec control functions.
Change-Id: Ibf876e289d4325bbb61ce19311da60d384624c2f
Crash occured on very first key frame, because denoiser
temporal function was beng entered.
Updated denoiser unittest to set cpu_used from first frame,
and verified fix fixes the crash.
Change-Id: I3be1124b52846fbbe7248d2c3d6136e086c80bc1
Comments are updated to reflect that these controls apply to VP9 only,
thereby, to insure the document produced by doxygent to reflect the
same fact too.
Change-Id: Ic54c88ec066aa0ec4552d43dd4a7016e1f810f42
This commit uses a 6-point 1-step refine motion search in the
integral projection based full pixel motion estimation, to replace
the current 9-point search.
It reduces runtime cost of speed -6 on some noisy clips, e.g.,
dark720p single thread
33314 b/f, 40.076 dB, 18231 ms ->
33307 b/f, 40.067 dB, 17768 ms
The compression performance for rtc set remains unchanged.
Change-Id: I194ea5a9ce52e5a10baeee36338633adc22f764c
This commit changes to use single loop to evaluate all inter modes.
There is no impact on compression quality and speed, but allow future
experiment with the order of modes evaluated.
Change-Id: I71696ce1014cbe127e25e98710d835987f5ecc09
Added a skip_dc check. If skip_dc = 1, we could eliminate calling
of vp9_model_rd_from_var_lapndz(). This gave slight PSNR & SSIM
gain(<0.1%), and no speed change.
Change-Id: If5ca733366148c86b98e196a00cc890f50e9a3e5
Re-arrange the multiplication and right shift operations to avoid
integer overflow in choose_partitioning.
Change-Id: Ib4005cafb410a67c1960486471d75b6ebe38c4e0
This commit removes the pred_mv_sad comparison from rtc motion
search, given that a stronger comparison has been done at the
mode search level to eliminate unlikely selected reference frames.
Change-Id: I49b8d24b2174303066fd8eff2102c0648f2869df
This commit enables the rtc coding mode to run integral projection
based motion search for golden reference frame. It improves the
speed -6 compression performance by 1.1% on average, 3.46% for
jimred_vga, 6.46% for tacomascmvvga, and 0.5% for vidyo clips. The
speed -6 is about 6% slower.
Change-Id: I0fe402ad2edf0149d0349ad304ab9b2abdf0c804
Make the vp9_int_pro_motion_estimation() function return zero
motion vector if high bit depth is turned on, instead of removing
it from compiled codes.
Change-Id: Ia48f010eb590b2d517d5678c394110b326a1a95e
This patch accounts in the first pass stats for blocks that
while not coded as intra, are complex and have an intra error /
best error ratio below a threshold.
The modification shortens the GF arf interval for a particular
class of content that contains a lot of blocks matching the
above criteria. (In one short problem test sequence the average
interval dropped from about 14-15 to 10-11)
The change results in small net gains in metrics results for the
Yt(~0.2%) and yt-hd (~0.5%) sets and is approximately neutral
for the other test sets.
The change is currently shielded by a flag and off by default
pending verification that it does not cause other regressions
in tests on a wider YT test set.
Change-Id: I6b803daa6a4ac09a6f428fb3a18be1ecedd974b7
Only update the rd_thresh factors for modes sharing same reference
frame. This helps overall compression of 6 and 7 by .13% and .19%
respectively without any noticeable speed difference.
Change-Id: Idb3a3879512c5d7d0880034516079949290690c5
For non-SVC 1 pass CBR: make the GF update interval a multiple of the
cyclic refresh period, and use encoding stats to prevent GF update at certain times.
Change-Id: I4c44cacc2f70f1d27391a47644837e1eaa065017
Tx_totals counters weren't handled correctly in multi-thread
case, which caused the mismatch while encoding using threads > 1.
This patch fixed that.
Change-Id: Ice9b0386f57175fb92a0bdcd5042686a3106246a
The return value from vp9_compute_qdelta_by_rate, which is
a delta value for the quantizer, could never be 0 if
(qindex == rc->worst_quality).
This occurs because target_index was setup unconditionally
in the loop and yet the loop counter stopped at
(rc->worst_quality - 1).
Change-Id: I6b59cd9b5811ff33357e71cd7d814c5e53d291f2
Choose_partition uses only the last frame as reference frame in making
partition decision, this commit adds the check on how well Golden
frame with (0,0) predicts the current block, and uses GF(0,0) as
basis for partition decision if it produces better prediction.
The commit improves rtc speed 6 and 7 encoding by 0.14% and 0.19%
respectively.
Change-Id: I156acf925bd6e0b586d48155d1940d27270a3915
When golden reference frame is refreshed, the next frame has both
its last and golden reference frames point to the same reference
frame in real-time coding mode. Experiments suggest that using
two separate reference frames for frames right after golden refresh
frame does not provide further compression performance advantage.
This commit hence retains the current encoder implementation and
shuts off the mode search over golden reference frame in this case.
It makes the encoder run slightly faster at no coding performance
change.
Change-Id: I1561f7799253a10e675d05c63c1749fe9e85b472
Force 64x64 partitioning when a whole superblock is SEGMENT_LVL_SKIP. This
drops encode times of screens mostly at rest by 20%.
Change-Id: Ieba554b0b8a0c1679aae784a8bd11f038ab942c3
Adjustment previously only enabled in VBR mode.
This patch allows adjustment of min and max q for CBR
and adjustment of max q only for CQ mode.
Change-Id: Id5e583f3d50453cd544fc57249acacd946457482
While turning on "--aq_mode=3", the quantizers are updated by each
thread. Fixed the me consts initialization function to make sure
that the correct thread data are updated.
Change-Id: Ied27bb7bae76fc3fa2cda4f8c35ac0b46271bef4
While searching for the best mode in non-rd case, SSE of
a partition block is calculated and the transform size is set.
This patch rewrites the skip checking conditions based on
transform size instead of partition size to be more precise.
Small gains were seen in rtc set borg test (speed 6).
AVG PSNR: 0.087%, overall PSNR: 0.073%, SSIM: 0.146%.
No noticeable speed change.
Change-Id: I5603ca5339c784dfa02263f4005988ccd8c32f6e
It was tiny when it was orginally marked INLINE. Forcing this function
to be inlined prevents the compiler from inlining its much smaller
callers.
No measurable speed impact, 28320 byte smaller libvpx.a
Change-Id: I6bf4c917157d15cbadb3cd3e20a9e82d35dc7d6f
Visual Studio is exceptionally picky about this:
vp9_reconintra.c(900): warning C4113: 'void (__cdecl *)()' differs in
parameter lists from 'void (__cdecl *)(void)'
[.build-x86_64-win64-vs10\vpx.vcxproj]
Change-Id: I564c7415f4608fd962be8c699d6133a996b545f7
This saves an extra 64x64 variance calculation and replaces two
32x32 variance functions with sad functions. The compression
performance change is unnoticeable.
Change-Id: I6d33868695664ec73b56c42945162ae61c484856
Frame buffers are now allocated dynamically on-demand.
Entries in the reference frame map, cm->ref_frame_map,
may now be set to -1 (INVALID_IDX) to indicate that
there is not a valid reference buffer in that "slot".
All slots in the reference frame map are now initialized
to the empty state (-1) and each buffer is initialized
to have a reference count of 0.
Change-Id: Id1afe98de98db4ae8b2dfefed7889c3b28c68582
Use rectangular block size for integral projection motion estimation
if the the 64x64 block has over half block outside the frame. This
avoids the issue that the motion information of these blocks is
dominated by the extended pixels, instead of the pixels of interest.
Change-Id: I22f4d2bb7f6a20db9b3f5e2e5463a7f4b9d1b737
The rounding factor needs to be scaled down by a factor of 2.
Also, the quantized and dequantized coefficients are memset to 0
when dc quantizer is used.
Change-Id: Ifa68bab02addbf1b83d249c5b4cbd5cda796b1cf
A frame may be waiting for an out of border pixel from another
frame. A frame's row progress variable is set to -1 when start being decoded
and another frame may be waiting for -2 row pixel from this frame.
In this case, vp9_frameworker_wait will return directly and skip the waiting
which leads to tsan error between threads.
Change-Id: Id16604915fb598b823e34393f696e3aa46fb6422
Most of the current decoders use tile-based multithreading. Also
most of the current decoders need frame_parallel_decoding_mode
turned on to enable multithreaded decoding. tile-columns is
limited by resolution, so setting to max (6) is fine.
BUG=https://code.google.com/p/webm/issues/detail?id=963
Change-Id: I6e7ac3485d96bf0c69e06706cbb326dd38be0020
Instead using only a fixed threshold, this commit adapts the threshold
for color sensitivity decision to luma signal energy: chroma channel's
sse is at least 1/6 of that in luma for color sensitivity flag to be
set to active.
This recoups a large portion of the speed loss due to accounting for
chroma component costs in RTC mode decision.
Change-Id: Ie01f747f6037dba6a1d1ed3e10b71a0ef1abc42c
This patch fixed webm issue 962.
(https://code.google.com/p/webm/issues/detail?id=962)
The data races occurred when an encoder and a decoder were created
at the same time, and the function pointers were initialized twice.
Change-Id: I8851b753c4b4ad4767d6eea781b61f0ac9abb44b
This commit replaces the SAD with variance as metric for the
integral projection vector match. It improves the search accuracy
in the presence of slight light change. The average speed -6
compression performance for rtc set is improved by 1.7%. No speed
changes are observed for the test clips.
Change-Id: I71c1d27e42de2aa429fb3564e6549bba1c7d6d4d
This commit fixes an issue in source frame border extension. It
causes certain frame resolution such as 640x480 to have a portion
of the right/bottom extension filled by zeros, which misleads
motion search and degrades transform coding performance when large
block size is used.
This fix improves the speed 2 compression performance of a few
yt sequence, typically ranging from 1% - 2%, up to 5% at median
to low bit-rate.
Change-Id: Id6b09a5695d9e7651c6dfbc2c6a72288b08af7fb
both the encode and decode perf tests require niklas_1280_720_30.yuv
broken since:
28eebf3 Merge "tests: add a shorter 720p test clip"
7839d03 tests: add a shorter 720p test clip
Change-Id: I51ebbf7261832e25d8f2c1da5c7df5c2e47f748e
+ add a helper function to reduce the duplication
this is a bit clearer when the environment variable is set, but the
directory is missing
Change-Id: I08f9b56122b5741bb40a5f795f7f82f5b49f1047
niklas_1280_720_30.y4m 60 frames @ 30fps
only a small number of frames are being used; this reduces the test data
download size in non-perf-test cases by >500M.
retain niklas_1280_720_30.yuv for encode+decode perf tests
Change-Id: I56b3433104acd462f952a9554280de5a3ec0b6d2
This commit applies one-step refinement search to the resulting
motion vector of the integral projectiion based motion estimation,
per 64x64 block. It improves the coding performance of speed -6.
pedestrian 1080p 500 kbps
51735 b/f, 36.794 dB, 16044 ms ->
51382 b/f, 36.793 dB, 16282 ms
cloud 1080p 500 kbps
24081 b/f, 37.988 dB, 14016 ms ->
23597 b/f, 38.076 dB, 12774 ms
vidyo1 720p 1000 kbps
16552 b/f, 40.514 dB, 8279 ms ->
16553 b/f, 40.543 dB, 8510 ms
The rtc set compression performance is improved by 0.5%.
Change-Id: I3d09bea2caf58b2a4f3b38aa26fffafcbe9a2c17
The intrinsic statement _mm_subs_epi16() should take immediate.
Feeding variable as its input argument will cause compile failure
in older version gcc.
Change-Id: I6a71efcc8d3b16b84715e0a9bcfa818494eea3f4
This commit modifies the hierarchical vector match patter. It
avoids repeated SAD computation at same points. The function
vp9_vector_sad_sse2 is called 12 times per 64x64 block, instead
of 15 times as before. The effective coverage remains the same.
Change-Id: I91ad9d27d40db8963c907d02af84e10702136994
In ssse3 functions, DEFINE_ARGS macro hard codes qcoeff and dqcoeff
to r3 and r4. If skip is 1, qcoeff and dqcoeff need to be loaded
from the stack, which doesn't work because of the above definitions.
Currently, skip=1 case is not used in the encoder. This patch fixed
the issue, so it can be turned on later.
Change-Id: I998d696b1a7a85dca2b3bcee790b21c21e039147
When GF group adaptive maxQ is enabled this patch accounts
somewhat for accumulated error in the rate control.
This improves accuracy quite a bit on many clips especially
when there is overshoot.
Examples when the overshoot and undershoot command line
parameters are set to 100:
Hall @ 1200 overshoot is reduced from 67-24%.
Akiyo @ 400 undershoot is reduced from 28%-15%.
Setting a lower value for undershoot or overshoot still
reduces the error further.
Impact on metrics is mixed with some gains in average psnr
but generally a little lower (e.g. 0.5%) on overall and ssim.
The GF group adaptation is still off by default in this patch.
Compared to with the head, enabling this mode now gives
big average psnr gains on the YT sets (e.g. YT_HD >11.2%),
a drop in overall PSNR (YT-HD 3.9%) and a smaller drop or
neutral for SSIM.
Change-Id: If4b32cd0740d3fb941317b374f9c2951954eee90
Target higher delta-qp for big blocks with zero motion,
and for segment#1: avoid 64x64 partition size and force 8x8 tx size.
Metrics on RTC set mostly positive: SSIM up by ~4%, PSRN by ~1.5%.
Doesn't seem to be any change in speed.
Change-Id: I1f68fa3c4f62dab3b90cc58041f05ebb048ae5ac
Modified the thresholds of deciding whether or not to skip
the transforms in model_rd_for_sb_y(). Used zbin[] instead
of dequant[] to be more precise. Also, modified the checking
coditions.
Rtc set borg test results (at speed 6) showed:
average PSNR gain: 0.138%, overall PSNR gain: 0.158%,
and SSIM gain: 0.177%.
The data rate test was modified slightly as suggested by
Marco.
Change-Id: Ieaf633ab77f4838cb3c45cf69065b29d55f8ae6c
This commit introduces a new block match motion estimation
using integral projection measurement. The 2-D block and the nearby
region is projected onto the horizontal and vertical 1-D vectors,
respectively. It then runs vector match, instead of block match,
over the two separate 1-D vectors to locate the motion compensated
reference block.
This process is run per 64x64 block to align the reference before
choosing partitioning in speed 6. The overall CPU cycle cost due
to this additional 64x64 block match (SSE2 version) takes around 2%
at low bit-rate rtc speed 6. When strong motion activities exist in
the video sequence, it substantially improves the partition
selection accuracy, thereby achieving better compression performance
and lower CPU cycles.
The experiments were tested in RTC speed -6 setting:
cloud 1080p 500 kbps
17006 b/f, 37.086 dB, 5386 ms ->
16669 b/f, 37.970 dB, 5085 ms (>0.9dB gain and 6% faster)
pedestrian_area 1080p 500 kbps
53537 b/f, 36.771 dB, 18706 ms ->
51897 b/f, 36.792 dB, 18585 ms (4% bit-rate savings)
blue_sky 1080p 500 kbps
70214 b/f, 33.600 dB, 13979 ms ->
53885 b/f, 33.645 dB, 10878 ms (30% bit-rate savings, 25% faster)
jimred 400 kbps
13380 b/f, 36.014 dB, 5723 ms ->
13377 b/f, 36.087 dB, 5831 ms (2% bit-rate savings, 2% slower)
Change-Id: Iffdb6ea5b16b77016bfa3dd3904d284168ae649c
There is a corner case that when a frame is corrupted, the following
inter frame decode worker will miss the previous failure. To solve
this problem, a need_resync flag needs to be added to master thread
to keep control of that.
Change-Id: Iea9309b2562e7b59a83dd6b720607410286c90a6
using this to control reallocation would miss a change if the function
were not called for every frame.
fixes potential memory corruption by the subsequent memset
Change-Id: I4c6bb6ab68803104fc824c7e27cc2f9b2cf53e33
use VP[89]_INSTANTIATE_TEST_CASE case when possible to disable the tests if
the codec is unavailable.
broken since:
be6aead Try again to merge branch 'frame-parallel' into master branch.
Change-Id: I8d81c5ba3b951f82be94bfaed6be194e4289baec
This commit prevent the encoder to update last_frame_type when a frame
is dropped in the encoder. Prior to this fix, if there is a dropped
frame immediatedly after a key frame, decoder would have the value of
last_frame_type as key frame, different from encoder as the dropped
frame in encoder would have updated the value to an inter frame. This
leads to different probability update in encoder and decoder, thereby
encoder/decoder mismatch.
This fixes issue #941
Change-Id: I27115224b138bec43ae3916c016574f5740822b0
Replaced a divide by 9 with 8, so some very small difference,
but otherwise no change in behavior.
Change-Id: I1079ae3c41e0789ff0bc6fa9940a238b6bca0f5b
Simple skin detection, from vp8; works reasonable on most of the
RTC clips, but could miss sometimes.
Added debug flag to write out skin map over source input.
Change-Id: I2caea7592f1c459047aac46627eeb24a94946464
This commit allows the encoder to properly account for the mode
cost in sub8x8 non-RD mode decision.
Change-Id: I2951960d20e37ed08e372ee0c7044935b2b9b899
Add the rate cost on inter prediction filter type to the overall
rate-distortion cost in vp9_pick_mode_inter.
Change-Id: I72c34017adf5220cadb3962694ee5404469fc673
This commit adds a heuristic rate cost of reference frame to the
non-RD mode decision. It improves the compression performance of
speed -6 by 0.31% and speed -5 by 0.69%.
Change-Id: If7f3b45519d49b2cb640bcb7316a254efc8be446
This enbale the encoder to set color space information for the input
video, so it is then coded in the output bitstream.
Change-Id: Ife03deab3c762425ccd27c4c190902c4d94a76f4
MODE_INFO struct was modified, and vp9_print_modes_and_motion_vectors()
didn't work anymore. This patch modified vp9_debugmodes.c so that
this function works again for debug usage.
Change-Id: I293fae0295235deb2529a460a274caf7c045ac1a
This is to avoid redo the same calculation repeatly, and also allow
easier adjustments for further experiments.
This commit shall have no effect on quality/compression.
Change-Id: I4460acf5c808ff5518da18d21e002c5da58af857
Note: This feature is still in development.
Add an option for the encoder to decide the resolution
at which to encode each frame.
Each KF/GF/ARF goup is tested to see if it would be
better encoded at a lower resolution. At present, each
KF/GF/ARF is coded first at full-size and if the coded
size exceeds a threshold (twice target data rate) at
the maximum active Q then the entire group is encoded
at lower resolution.
This feature is enabled in vpxenc by setting:
--resize-allowed=1
In addition, if the vpxenc command line also specifies
valid frame dimensions using:
--resize-width=XXXX & --resize_height=YYYY
then *all* frames will be encoded at this resolution.
Change-Id: I13f341e0a82512f9e84e144e0f3b5aed8a65402b
This commit fixes the sub block partition size used in
fill_mode_info_sb. Previous implementation effectively disabled
the rectangular block sizes. This commit resolved this issue.
Change-Id: Ic1c383ab0a9a2e7d59e85b388093f1f1f94d1e7f
This will fix the frame parallel decode hang on windows
due to not enough semaphores.
This will also make the frame parallel decode safer as
the number of frame buffers could only support maximum
8 threads.
Change-Id: Id9ef50692819dcbebbd74a0aabffbfb3f39a4309
This commit changes the value of highbitdepth flag to avoid conflict
with vp8 refresh_last_frame flag.
Change-Id: Idcff2cf44f0a200bd935b326f785c0cf32d7228a
The calculation of required extension used in HBD case was wrong due
to rounding for UV when y dimension is odd. This commit replace the
computation with correct version.
This fixes a crash caused by writting beyond buffer boundary.
Change-Id: Ic7c9afeb7388cd1341ec4974a611dacfb74ac6b6
This commit makes the ZEROMV mode first in the search order to
ensure that the zero mv is always checked in the RTC coding mode.
It improves the average speed -6 compression performance by 0.3%
in both PSNR and SSIM at no visible speed change.
Change-Id: I465a7e59f4e20cd84fee3f02ced6f98036945949
This reverts commit a6715a7558.
Removes a duplicate entry; this was previously added by:
14e37cf Add help info for --enable-vp9-highbitdepth
Change-Id: I61408e782232821ef6ed84775b5c79d172ba7f2d
cm->frame_bufs[].idx values were made consistent in:
61c5e94 Use -1 consistently as invalid buffer idx
update the initialization in swap_frame_buffers() to match.
additionally:
- remove some shadowed variables in the former and marked them volatile
Change-Id: Ie3f9636c405bd822112bb56bd22d28024ae98909
The high bit depth build failed while building for 32bit target.
The bugs were in vp9_highbd_subpel_variance.asm and
vp9_highbd_sad4d_sse2.asm functions. This patch fixed the bugs,
and made 32bit build work.
Change-Id: Idc8e5e1b7965bb70d4afba140c6583c5d9666b75
there are no known issues since:
10d5e09 Fix issues in 32bit PIC enabled build
related issues: #808, #924
Change-Id: I80454f95fe6b4ce630fdd434d740ce8b0d42951b
The current file's directory, ".", is treated much more literally
when building libvpx examples with Xcode than it is with make, and
clang cannot find common include files included via "./" when those
files actually reside one directory up in the tree.
Change-Id: I5f66a026282e35d80248ca4052ebb882b859172e
On rtc set:
speed 7 quality improves about 0.5%
speed 8 quality improves about 1.0%
Encoding time for speed 7 changes from 67804ms to 65889ms
Encoding time for speed 8 changes from 58659ms to 56808ms
Change-Id: Iabcfb53012fc1b9f3326cdbc167e5758b8c7ad30
After syncing the frame worker thread, avaiable thread count should
increase by 1 even the worker thread does not have displayable frame
to output.
Change-Id: I9eeb87720fed82dfe38555286833ff88e8a8e746
Reuse the yv12_mb array to fetch the buffer pointers/strides
corresponding to the current reference frame.
Change-Id: I5276b7494158b2cccef15213be2dc189e9036851
This commit allows the encoder to account for additional chroma
plane costs in the mode decision process, if the current block
potentially contains significant color change. It improves the
visual quality at very low bit-rates.
The compression performance of dark720p is improved by 12.39% in
speed 6. For jimred at 150 kbps, the PSNR of V component (red)
increased by 0.2 dB, at the expense of about 5% increase in
encoding time. Note that for sequences where the chroma components
are fairly consistent, the encoding time increase is negligible.
On average the rtc set compression performance is improved by
1.172% in PSNR and 1.920% in SSIM.
Change-Id: Ia55b24ef23a25304f7ec9958fbf07fd6e658505c
This patch continues the work to remove frame_parallel_decoding_mode
requirement in VP9 multi-threaded tile decoder. In order to do that,
the frame counts associated to each thread need to be accumulated
together after the frame is decoded.
Change-Id: Idba1a756cedfed3c154aef52ed82c8da3bbf9e0c
The original implementation had the following comment:
// Ignore mv costing if mvsadcost is NULL
However the current implementation does not allow for this.
If x exists then nmvsadcost must not be null.
This removes the only warning from -Wpointer-bool-conversion
https://code.google.com/p/webm/issues/detail?id=894
Change-Id: I1a2cee340d7972d41e1bbbe1ec8dfbe917667085
The current multi-threaded tile decoder requires that the videoes
are encoded with frame_parallel_decoding_mode = 1. This requirement
is not necessary, and is better to be removed. This patch includes
the first part of the work.
Change-Id: Ic7695fb3cfe13f9022582c9f0edd2aa6e2e36d28
In vp8_sub_pixel_variance8x8_neon the temp2 buffer is only initialized
to kHeight8 * kWidth8. However, in the case that xoffset != 0 and
yoffset == 0, var_filter_block2d_bil_w8 is called with output_width
kHeight8PlusOne.
Thanks to cmugurel for diagnosing and yulius for the patch.
Change-Id: Ib71ffd96ffad963c92b8b7ca23f303942785b8e0
https://code.google.com/p/webrtc/issues/detail?id=4190
Apple ships version 0.98 of nasm through at least XCode 6. It is
incompatible with the assembly in libvpx.
https://code.google.com/p/webm/issues/detail?id=772
Change-Id: I33245a76f50a8224fe6fafa3cce9991f953fdcc8
1. Adjusted the threshold for coef update computation based on counts
of tx used, avoid coef update computation when count is low (<20)
2. Move sf->lpf_pick = LPF_PICK_MINIMAL_LPF to speed 8.
Change-Id: I02b44309e40fcdbf135c7934ae067a3f42502d30
In frame parallel decode, libvpx decoder decodes several frames on all
cpus in parallel fashion. If not being flushed, it will only return frame
when all the cpus are busy. If getting flushed, it will return all the
frames in the decoder. Compare with current serial decode mode in which
libvpx decoder is idle between decode calls, libvpx decoder is busy
between decode calls.
Current frame parallel decode will only speed up the decoding for frame
parallel encoded videos. For non frame parallel encoded videos, frame
parallel decode is slower than serial decode due to lack of loopfilter
worker thread.
There are still some known issues that need to be addressed. For example:
decode frame parallel videos with segmentation enabled is not right sometimes.
* frame-parallel:
Add error handling for frame parallel decode and unit test for that.
Fix a bug in frame parallel decode and add a unit test for that.
Add two test vectors to test frame parallel decode.
Add key frame seeking to webmdec and webm_video_source.
Implement frame parallel decode for VP9.
Increase the thread test range to cover 5, 6, 7, 8 threads.
Fix a bug in adding frame parallel unit test.
Add VP9 frame-parallel unit test.
Manually pick "Make the api behavior conform to api spec." from master branch.
Move vp9_dec_build_inter_predictors_* to decoder folder.
Add segmentation map array for current and last frame segmentation.
Include the right header for VP9 worker thread.
Move vp9_thread.* to common.
ctrl_get_reference does not need user_priv.
Seperate the frame buffers from VP9 encoder/decoder structure.
Revert "Revert "Revert "Revert 3 patches from Hangyu to get Chrome to build:"""
Conflicts:
test/codec_factory.h
test/decode_test_driver.cc
test/decode_test_driver.h
test/invalid_file_test.cc
test/test-data.sha1
test/test.mk
test/test_vectors.cc
vp8/vp8_dx_iface.c
vp9/common/vp9_alloccommon.c
vp9/common/vp9_entropymode.c
vp9/common/vp9_loopfilter_thread.c
vp9/common/vp9_loopfilter_thread.h
vp9/common/vp9_mvref_common.c
vp9/common/vp9_onyxc_int.h
vp9/common/vp9_reconinter.c
vp9/decoder/vp9_decodeframe.c
vp9/decoder/vp9_decodeframe.h
vp9/decoder/vp9_decodemv.c
vp9/decoder/vp9_decoder.c
vp9/decoder/vp9_decoder.h
vp9/encoder/vp9_encoder.c
vp9/encoder/vp9_pickmode.c
vp9/encoder/vp9_rdopt.c
vp9/vp9_cx_iface.c
vp9/vp9_dx_iface.c
This reverts commit a18da9760a.
Change-Id: I361442ffec1586d036ea2e0ee97ce4f077585f02
+ nearest for consistency
near is a reserved word in windows builds so using it as a parameter
name may cause build failures with some configurations
Change-Id: Iddf1d4ecdb39843f14e95dbfd9dca55f07f81403
1. move the check of search method of USE_TX_8X8 up one level to
avoid operations of build_tree_distributions()
2. count tx used and avoid computaton for coef udpate when one size
is not used at all.
Change-Id: Ia3e54a2588aa531c41377a1bfaa64385d04a592c
The previous patch "Fix issues in 32bit PIC enabled build" fixed
the x86inc.asm for macho32. Now we can enable use_x86inc while
building libvpx for 32bit pic enabled Darwin target, which makes
the encoder a lot faster(>2X) in this case by turning on the
existing optimizations.
Change-Id: I5f5c7add428d73f50c935c48d0a70aed2b1eb7af
gives a better summary of what is enabled / disabled outside of the
automatic toolchain options.
fixes issue #936
Change-Id: I1bf27593a5512713aab1473cb606c58cf3084d62
1. reduce the size of temporaray arrays on stack
2. avoid build_tree_distribution for tx size that is not used at all.
Change-Id: I0f8d7124e16a3789d3c15ad24cf02c1c12789e2c
This patch was to fix issue 924:
https://code.google.com/p/webm/issues/detail?id=924
The SECTION_RODATA macro was modified to support macho32 format.
The sub-pixel functions were modified to pass in 2 more parameters
to handle the global offsets for PIC build.
Change-Id: I3bfcd336bcae945edf300bca4ab40376a2628cd4
On Nexus 7 speed -6 saw ~18% increase in perf.
Tested on Nexus 7, built with ndk r10d, gcc 4.9.
BUG=https://code.google.com/p/webm/issues/detail?id=908
Change-Id: I70ccdea0326750552ed946fb004507d6efe02d5c
On Nexus 7 speed -6 saw ~15% increase in perf.
Tested on Nexus 7, built with ndk r10d, gcc 4.9.
BUG=https://code.google.com/p/webm/issues/detail?id=908
Change-Id: I4b2006b644c488f42bf06d8a22ef0e6120a96bf9
On Nexus 7 speed -6 saw ~30% increase in perf.
Tested on Nexus 7, built with ndk r10d, gcc 4.9.
BUG=https://code.google.com/p/webm/issues/detail?id=908
Change-Id: Id12af7d1883243c23e6692e898aea82299633d58
The current method doesn't work with Xcode 4 and up, since they no
longer have a $DEVELOPER_DIR/SDKs directory. Using xcrun and xcodebuild
works all the way back to Xcode 3 on OS X 10.6 Snow Leopard, if not
earlier.
Change-Id: I7126f2fb4a8f1d6e46f921e70bbd090f00ce3d36
Floating point is used in vp9_convert_qindex_to_q(), so sometime unit
test ActiveMapTest would cause run time error without properly call
to clear_system_state to reset register status.
Change-Id: I181e9395148c44a6ca8b97d6e109bd4a152143c6
Add distortion threshold condition to refresh state of a coding block,
and allow for qp adjustment also for some intra modes and non-zero motion modes.
Also some code cleanup (remove unused variables/code).
Change-Id: I735fa2b28bc64f60e0323976b82510577b074203
Currently disabled by default: enabled using
#define GROUP_ADAPTIVE_MAXQ
In this patch the active max Q is adjusted for each GF
group based on the vbr bit allocation and raw first pass
group error.
This will tend to give a lower q for easy sections
and a higher value for very hard sections. As such it is
expected to improve quality in some of the easier
sections where quality issues have been reported.
This change tends to hurt overall psnr but help
average psnr. SSIM also shows a small gain.
Average results for derf, yt, std-hd and yt-hd test sets were
as follows (%change for average psnr, overal psnr and ssim):-
derf +0.291, - 0.252, -0.021
yt +6.466, -1.436, +0.552
std-hd +0.490, +0.014, +0.380
yt-hd +5.565, - 1.573, +0.099
Change-Id: Icc015499cebbf2a45054a05e8e31f3dfb43f944a
On Nexus 7 speed -5 got ~2%, -6 got ~15%, -7 and -8 got ~30%
increase in perf.
Tested on Nexus 7, built with ndk r10d, gcc 4.9.
Change-Id: I83246d63b96674d170098a572fa4fe28a05aaf51
the result should have both bits set; previously this was converted from
webp incorrectly and resulted in a boolean check...
Change-Id: I2a7c7f2b491945f3a536ab4fca02247eccc892b8
This commit replaces an integer divide with a table-lookup. It is
to improve decoding speed, and at the same time, to reduce possible
complications with a bug in AMD Family 12h processors:
"665 Integer Divide Instruction May Cause Unpredictable Behavior"
Change-Id: I678b707a538798a923850bac467e66e847e6def7
In frame parallel decode, libvpx decoder decodes several frames on all
cpus in parallel fashion. If not being flushed, it will only return frame
when all the cpus are busy. If getting flushed, it will return all the
frames in the decoder. Compare with current serial decode mode in which
libvpx decoder is idle between decode calls, libvpx decoder is busy
between decode calls. VP9 frame parallel decode is >30% faster than serial
decode with tile parallel threading which will makes devices play 1080P
VP9 videos more easily.
* frame-parallel:
Add error handling for frame parallel decode and unit test for that.
Fix a bug in frame parallel decode and add a unit test for that.
Add two test vectors to test frame parallel decode.
Add key frame seeking to webmdec and webm_video_source.
Implement frame parallel decode for VP9.
Increase the thread test range to cover 5, 6, 7, 8 threads.
Fix a bug in adding frame parallel unit test.
Add VP9 frame-parallel unit test.
Manually pick "Make the api behavior conform to api spec." from master branch.
Move vp9_dec_build_inter_predictors_* to decoder folder.
Add segmentation map array for current and last frame segmentation.
Include the right header for VP9 worker thread.
Move vp9_thread.* to common.
ctrl_get_reference does not need user_priv.
Seperate the frame buffers from VP9 encoder/decoder structure.
Revert "Revert "Revert "Revert 3 patches from Hangyu to get Chrome to build:"""
Conflicts:
test/codec_factory.h
test/decode_test_driver.cc
test/decode_test_driver.h
test/invalid_file_test.cc
test/test-data.sha1
test/test.mk
test/test_vectors.cc
vp8/vp8_dx_iface.c
vp9/common/vp9_alloccommon.c
vp9/common/vp9_entropymode.c
vp9/common/vp9_loopfilter_thread.c
vp9/common/vp9_loopfilter_thread.h
vp9/common/vp9_mvref_common.c
vp9/common/vp9_onyxc_int.h
vp9/common/vp9_reconinter.c
vp9/decoder/vp9_decodeframe.c
vp9/decoder/vp9_decodeframe.h
vp9/decoder/vp9_decodemv.c
vp9/decoder/vp9_decoder.c
vp9/decoder/vp9_decoder.h
vp9/encoder/vp9_encoder.c
vp9/encoder/vp9_pickmode.c
vp9/encoder/vp9_rdopt.c
vp9/vp9_cx_iface.c
vp9/vp9_dx_iface.c
Change-Id: Ib92eb35851c172d0624970e312ed515054e5ca64
For low spatial resolutions: bias partittion selection to smaller block sizes,
and base the variance computation on 4x4 down-sampling.
Also move the threshold computations into the choose_partitioning,
so they are computed once for each sb block.
On low-res clips (RTC_derf) PSNR/SSIMetrics increase by about 4-5%.
No change for resolutions above CIF.
Change-Id: I93f8ff742c8044786977bb6e31dcf8efda6dd1b0
Just before a forced key frame we often get a foreshortened
arf/gf group. In such a case, we do not want to update
rc->last_boosted_qindex, which is used to define the Q range
for the forced key frame itself.
This gives a small average metrics gain for the YT and YT-HD sets
(eg. YT SSIM +0.141%).
Change-Id: Ie06698bc4f249e87183b8f8fb27ff8f3fde216d9
The comparison of address in the condition is not necessary, since
they will constantly be non-null.
Change-Id: Id0b0075283f5af65215d5761a8160a4cb2a15c9b
The SSE2 code is from VP8 MFQE, reuse it in VP9. No change on VP8
side. In our testing, we achieve 2X speed by adopting this change.
Change-Id: Ib2b14144ae57c892005c1c4b84e3379d02e56716
1. Added row-based loopfilter in encoder;
2. Moved common multi-threaded loopfilter functions from decoder
to common;
3. Merged multi-threaded loopfilter code, and made encoder/
decoder call same function to reduce code duplication.
Encoder tests showed that 1% - 2% speedup was seen for good-quality
2-pass mode(at speed 3); 1% - 3% speedup using 2 threads and 4% - 6%
speedup using 4 threads were seen for real-time mode(at speed 7).
Change-Id: I8a4ac51c2ad9bab9fa7b864e90743931c53ec1c4
This commit fixes a bug in denoiser reference frame buffer swap,
which disables frame buffer update.
Change-Id: I39a9427180fd18f9692602064ad821f7af4714c0
On Nexus 7 speed -5, -6, -7, and -8 saw about a 1% increase
in perf for 480p. Speeds -5, -6, -7, and -8 saw about a 1.5%
increase in perf for 720p.
Tested on Nexus 7, built with ndk r10d, gcc 4.9.
Change-Id: Ibf17ebfd952a6aec941719bd8306df8ec4574bee
On some platforms, such as 32bit Windows and 32bit Mac, the allocated
memory isn't aligned automatically. The thread data is aligned to
ensure the correct access in SIMD code.
Change-Id: I1108c145fe982ddbd3d9324952758297120e4806
This commit added coments for the following encoder controls:
VP9E_SET_LOSSLESS
VP9E_SET_TILE_COLUMNS
VP9E_SET_TILE_ROWS
VP9E_SET_FRAME_PARALLEL_DECODING
VP9E_SET_AQ_MODE
Change-Id: I2f75afd9cce01394f202b8e25f36bf763be0ddeb
This commit adds encoder side control for vp9 to set color space info
in the output compressed bitstream.
It also amends the "vp9_encoder_params_get_to_decoder" test to verify
the correct color space information is passed from the encoder end to
decoder end.
Change-Id: Ibf5fba2edcb2a8dc37557f6fae5c7816efa52650
On Nexus 7 speed -5, -6, -7, and -8 saw about a 15% increase
in perf for 480p. Speeds -5, -6, -7, and -8 saw about a 10%
increase in perf for 720p.
Tested on Nexus 7, built with ndk r10d, gcc 4.9.
Change-Id: I2fa5315845e3021c9a6e2ea47e52e68b398d8334
Don't put small empty frame in front of a key frame. We will
put key frame flag in webm container if there's a visible key
frame. But there will be decoding error when we seek to here
if we put the small empty frame, which will be inter frame,
in front of it.
Change-Id: Id50c2c1fd31da0405ff6faa7375cc2f49c55402d
This commit added a field to vpx_image_t for indicating color space,
the field is also added to YUV_BUFFER_CONFIG. This allows the color
space information pass through the decoder from input stream to the
output buffer.
The commit also updated compare_img() function with added verification
of matching color space to ensure the color space information to be
correctly passed from encode to decoder in compressed vp9 streams.
Change-Id: I412776ec83defd8a09d76759aeb057b8fa690371
Add optimized Neon functions of:
vp9_variance32x64
vp9_variance64x32
vp9_variance64x64
On Nexus 7 speed -5 and -6 saw about a 4% increase in perf.
Speeds -7 and -8 saw about a 6% increase in perf.
Tested on Nexus 7, built with ndk r10d, gcc 4.9.
Change-Id: I5a81f13c9897eb927fa39662530f5524a0f768fa
Replaced "color space" with "color format" in comments where color
sampling format is concerned, so to differentiate from the concept
defined in COLOR_SPACE.
Change-Id: I8c935034c166b24307a99352dab1686531276bb8
This commit refactors the motion compensated reference block fetch
process in denoiser. It skips the stage that generates motion
compensated reference block if denoiser decides to use copy block
mode. For high motion clips, this could speed up the denoising
process by about 10%.
Change-Id: I8ef4fa5fe766a8c4529119b9ec01faefb3d4ef53
Use frame buffer pointer swap instead of memcpy when possible.
These two CLs make the denoiser when running on vidyo1 720p at
speed -6 over 10% faster.
Change-Id: I64fe8a2422cafca6787a50c7f4dfb961191c0a9d
These two parameters are used to control the denoiser cut-off
thresholds. They should be properly initialized when starting
mode search of a given block.
Change-Id: Iba8a25487026a0dbe0d350c347d7e4e4e237b637
When qdiff is larger, the sad/variance threshold should also be
higher which indicates a more aggressive action on MFQE.
Change-Id: I44c5c93572805458d4f87fdc7619cc9d8a522185
The vp9_denoiser_free() function will internally check if the
buffer pointers are NULL. This commit makes the encoder always
call vp9_denoiser_free() after finishing encoding. It protects the
case where noise_sensitivity_level is changed during encoding
process and happen to be turned off towards the end of sequence,
which could result memory space allocated to denoiser not being
released.
Change-Id: Ie20dc2f2e6e5fb6333fbab3356bc153978a6a0f8
Use the correct frame size and stride value for chroma components
when setting the initial values. These control parameters are
assigned when the denoiser buffer was allocated and initialized.
Change-Id: Ia6318194c7738aff540bcbd34f77f0dac46221a1
Allocate the frame buffer allocation for denoiser once during the
encoder initialization. This avoids allocating frame buffer
multiple times and overwriting the buffer pointer without proper
releasing.
Change-Id: I9b3baa6283449d86fd164534d344c036bb035700
When testing frame sse to choose a loop filter value and
when checking ambient error in kf Q selection, use 64 bit
values for accumulating the sse, to avoid risk of overflow
for large image formats.
Change-Id: I03765d16c843d0ade61a45b0cd46312472697e57
Separate functions and rename files. This will make it easier to disable
some functions later to help work around a compiler issue in chromium.
Change-Id: I7f30e109f77c4cd22e2eda7bd006672f090c1dc5
This makes the inter_mode counts update consistent with other symbols.
Also, forward updates should work corerctly now.
Change-Id: Id98be26fd08875162e644bb8f1de6f0918f85396
The denoiser sensitivity level should be set to 1 starting from
key frame. The internal function of denoiser should make the
temporal denoising operations cut off in key frame coding.
Change-Id: Id3e704a73e98e4ea801284a2cbbab2ea9c371d23
With "show_existing_frame" frames:
Minimum data size for profile 0 and 1 is 1 byte (8bits)
Minimum data size for profile 2 and 3 is 2 bytes (9bits)
Otherwise:
Minimum data size is 8 bytes.
This resolves the VP9 failure in fuzzing test build #56.
Change-Id: I146d9d37688f535dd68d24aacc76d464ccffdf04
By using weighted averaging in the calculation of the frames to be
displayed, we get an average gain of more than 1 db for key frames
whose base qp are 20 higher than non-key frames.
Change-Id: I7bcb2e7b9c6420ea3f73f33204d18b072dffd17c
This commit fixes the buffer alignment control in denoised video
output function. The encoder is now able to properly store the
denoised input video into provided file when enabled.
Change-Id: I258e272c8d4a9b52592e16d6d09976c6f5c21728
Use mbmi->segment_id directly in vp9_pick_inter_mode. The value is
set outside this function, hence no need to assign it again.
Change-Id: I3d63cdd2e4fadf62ccdefada638b00d979eb3741
Check if block size is below 8x8 for rectangular block coding. It
is added to support 4x8 and 8x4 block coding for RTC mode.
Change-Id: I760b328f45b98ae48adc45ed5a39fb643cd8aebd
This commit simplifies the reference motion vector part for sub8x8
block coding in RTC mode and reduces the required local variables.
Change-Id: I470d1482092563b68af22404dc1f497e7457b0a8
VP9FrameSizeTestsLarge.OneByOneVideo has been causing a failure in
jenkins libvpx__unit_tests-valgrind_long for "using of uninitialized
memory", the root cause was that the input image for this test was
not initialized with proper size, therefore plan U and V were not
initialized at all.
This commit fixes the size initialization, and resolves the issue.
Change-Id: Ic4dd1542b7bb0cb260a1e0aeeb505db21ae5edc8
This commit enables sub8x8 inter block coding for RTC mode. The
use of sub8x8 blocks can be turned on by allowing
choose_partitioning function to select 4x4/4x8/8x4 block sizes.
Change-Id: Ifbf1fb3888fe4c094fc85158ac3aa89867d8494a
Properly set the corresponding scaling factor of the reference
frame in the non-RD mode decision process. This allows the mode
search process to account for the scaled reference frame when
selecting coding mode.
Change-Id: I9d41bff6931c98e5a82b413e37ac5e6e14b93b23
Local variables used at the setjmp() site need to be marked volatile.
Relevant excerpt from the 'man longjmp':
===============
The values of automatic variables are unspecified after a call to
longjmp() if they meet all the following criteria:
· they are local to the function that made the corresponding setjmp(3) call;
· their values are changed between the calls to setjmp(3) and longjmp(); and
· they are not declared as volatile.
===============
Change-Id: I093e6eeeedbf5f781d202248ca701ba2c29d3064
This allows us to track decode speed for new encodes so that we catch
problems like an encode change that makes decode really slow.
Change-Id: I7210196415c4e53d455e9c81246d9fb324913a06
Encode the files with 1, 2, and 4 threads.
Explicitly turn on error resilient and frame parallel
decoding and turn off altref frames.
Change-Id: I02b66f72b7d35c666c3ba685b33015508e440209
The unit tests for VP9 multi-threaded encoder are added, which
carry out tests for all three modes(i.e. kTwoPassGood, kOnePassGood
and kRealTime), and speeds ranging from 1 to 8. A 1280x720 test
clip is used, which is encoded into multiple tiles. The number of
threads is num_of_tiles.
Change-Id: I04419eeca145ad841c9c527603668239a82e7fbd
This commit adds a guard condition to the intra mode test skip
control in RTC coding mode. If all inter modes are skipped, force
the encoder to check intra mode. It avoids situations where the
encoder processes without properly assigning required mode
information.
Change-Id: Ibb349fee997d6584ce901d08b06e8df3ca9c01b1
Initial patch to remove get_zbin_mode_boost() and
cpi->zbin_mode_boost.
For now sets a dummy value of 0 for zbin extra pending
a further clean up patch.
Change-Id: I64a1e1eca2d39baa8ffb0871b515a0be05c9a6af
this function may return an error if no frame is available; --keep-going
is meant to test decoder resilience, so simply warn in this case.
Change-Id: I6e6aed3e78eca21cca80d7d8a06a1a244685ba29
The alternate reference frame is disabled in non-RD mode. No need
to keep the related entries in the THR_MODES array.
Change-Id: I53386f4bb1c6284f582801f27246c5edf55bc24b
In RTC coding mode, the alternate reference frame modes and compound
inter prediction modes are disabled. This commit reworks the
related mode search threshold update process to skip interacting
with these coding modes. It provides about 1.5% speed-up for speed
-6 on average.
vidyo1
16551 b/f, 40.451 dB, 6261 ms -> 16550 b/f, 40.459 dB, 6190 ms
nik720p
33316 b/f, 38.795 dB, 6335 ms -> 33310 b/f, 38.798 dB, 6237 ms
mmmoving
33265 b/f, 41.055 dB, 7176 ms -> 33267 b/f, 41.064 dB, 7084 ms
dark720
33329 b/f, 39.729 dB, 11235 ms -> 33331 b/f, 39.733 dB, 10731 ms
Change-Id: If2a4090a371cd28f579be219c013b972d7d9b97f
This commit removes undefined value options of cpu-used for VP9 and
changed vpxenc prompt to reflect the usable range of [-8,8]
Change-Id: Ib80fef3dbb6ec9aabac45ed13e8ab6fbaf94f55e
Use a temporary variable to store the transform size associated
with the best intra mode and restore the mode_info if the overall
best mode is intra mode.
Change-Id: I2606e0061ad32f91b095462902b1eb734b128eea
The encoder initialization is called in EncodeFrame(). Therefore,
in the unit tests, the set control is done when video->frame() is 1.
This didn't cause problem since current tests mainly test lag_frame
> 0 case, or no encoding option that needs to allocate memory before
1st frame is used. If use lag_frame = 0 and encoding multiple tiles,
the unit tests crash. The issue is fixed by doing the initialization
before encoding frames.
Change-Id: I43102048f88448bcf27e9c60e0ec06c176b02e5c
Only for the rectangle blocks larger than 16X16, SAD and Variance are
still based on the internal square blocks.
Change-Id: I3754da1b0254147313f86a0140dbf4f980f06a5a
The mode_info array was unnecessarily reset to zero every frame
when error resilient mode turned on, given that the mode info
values per block will be assigned during mode search stage.
This commit removes this reset operation. It reduces the runtime
cost on memset operation to 1/3. The overall speed -6 runtime is
reduced by 2%.
Change-Id: I32ecb73338d8995cc0c5147de09357364f13d45b
This commit explicitly set the second reference frame type to be
NONE in key frame coding mode. This fixes a subtle dependency of
reference motion vector used by next inter frame on mode_info
reset before key frame coding.
Change-Id: I5ff0359753fdc9992b0bfe889490f7a32d7d5f6a
These were established for compatibility. Make sure to use them.
Most frequently they manifest as issues on Visual Studio builds.
Change-Id: I39d764d2eb341b999d7a6132cb44b2acfc511160
Export vpx_codec_enc_init_multi_ver so the vp8 multi res encoder example
can see it when building shared.
Change-Id: Ic5222b1b6d949f39c7e50c3bc58fb76bece2a3f1
Delete vp9_dc_only_idct_add_neon.c
The function was merged with vp9_short_idct4x4_1_add (later
vp9_idct4x4_1_add) in d2de1ca and should have been deleted then.
Change-Id: Ie58ba3dd9dc7330a8f1238dd7dd71c9ed4639b94
Signed-off-by: James Yu <james.yu@linaro.org>
Where there is very subtle motion, especially when combined
with low spatial complexity, the codec sometimes fails to quickly
pick up the ambient motion field.
Once it has been established though the field propagates well using
Nearest and Near MV.
This patch looks specifically at the case where the Nearest and Near
have not been established as non zero vectors and in this case
discounts the cost of searching for a new vector in the rd code.
This will almost certainly have some implications in terms of encode
speed but it should be possible to mitigate the impact in a subsequent
using first pass stats and the local spatial complexity.
Average results for test sets approximately neutral.
Change-Id: I44a29e20f11f7ab10f8c93ffbdc50183d9801524
Change 72141 introduced a new use of vp9_avg_4x4.
This call needs to switch to using vp9_highbd_avg_4x4
when performing high bitdepth encodes.
Change-Id: I6a8ba4b62f8a75d0a917b365a55245e2f0438ea1
When multiple intra modes are tested, the previous mode info
update process may overwrite the selected best intra mode and make
the final selection use an inter mode. This commit fixes this
issue by moving the mode_info reset outside the intra mode search
loop.
Change-Id: I15ed4288a6b3cb0832104a5e6d5d9a25cd1a5b2b
If vp9_pick_inter_mode works properly, it should at least check
one coding mode and hence get best_tx_size assigned a valid value.
There is no need to initialize best_tx_size with a legitimate
value before starting the mode search.
Change-Id: Ic0496cd89672ea9c2c512a9bd1da952190af9cba
Make the variable reduction_fac log2 based and explicitly use
right shift when computing intra_cost_penalty.
Change-Id: I208f1fb879a02debb3b3fc64f9fd06260dcf1c86
Add vp9_iht8x8_add_neon.c
- vp9_iht8x8_64_add_neon
The assembly did not previously implement tx_type 0
BUG=716
Change-Id: Icfc99dd24f3d59047f9184a7d0c761ba7e3de934
Signed-off-by: James Yu <james.yu@linaro.org>
Add vp9_iht4x4_add_neon.c
- vp9_iht4x4_16_add_neon
The assembly did not previously implement tx_type 0
BUG=715
Change-Id: I60034d1568de034edba45c5cdd13f3d87dbc73b6
Signed-off-by: James Yu <james.yu@linaro.org>
Fails to compile. Bad calls to vp9_alloc_frame_buffer
and vp9_realloc_frame_buffer in postproc.c
This reverts commit 399823b6f5.
Change-Id: I29f0e173f8e185d3a303cfdb17813e1eccb51e3a
Allows override of default target list. Also added missing usage info
for --extra-configure-args, and removed last vestiges of armv6 support.
Change-Id: Ic0f14fffa0cbaea1bed371d38ff65e035bbe3273
Add support for setting byte alignment on the Y, U, and V plane of the
reference buffers. The byte alignment must be a power of 2, from 32 to
1024. A value of 0 sets legacy alignment.
Change-Id: I7c1399622f7aa68e123646369216b32047dda73d
INLINE is used quite widely in vp9, this change improves performance
1-2% on most modern platforms.
Change-Id: I8a9974aab89fa588ea4923cc7eaf6199e344a528
the entire module is wrapped in CONFIG_VP9_POSTPROC which is forcibly
enabled with CONFIG_INTERNAL_STATS
+ a similar change in vp9_alloccommon.c
Change-Id: I374993297a9fba5bef2f0b71f984eba42f0995a3
set LIBVPX_RAND with --enable-vp9-postproc, previously only the vp8
config was checked. this fixes the build with --disable-postproc.
Change-Id: Ia61baded6aa0e44d6443ae4a3c85915f1054f053
Assembly tests should clear system state, as we have no
expectation of proper system state in between test runs..
Change-Id: I0f591996c1f17ef2a5a8572a6b445f757223a144
This commit fixes a bug in the PICK_MODE_CONTEXT index for
horizontal partition case. The compression performance change
is less than 0.01% level, since most blocks are selected to
use square block size in RTC coding mode.
Change-Id: I67effc18ae8795fccdd82a55f4efc609fa5cb3e1
For key frame under variance source partition: 4x4 prediction blocks
may be selected when variance of 8x8 block is very high (threshold is set fairly high for now).
Testing on some RTC clips shows this helps to reduce some ringing artifacts on key frame.
Encoded key frame size increases about ~10%. Key frame PSNR increases about ~0.1-0.2dB.
Change-Id: I56e203fac32ea6ef69897fb3ea269c59cb50d174
This commit explicitly uses the bit shift operation instead of
division for computing block variance.
Change-Id: Id19c0ff27dd1d1ae4aceee6657e1aad0d406bd74
If decoding starts with intra-only frame, there is a possibility
of using uninitialized entropy context, what leads to undefined
behavior.
Change-Id: Icbb64b5b1bd1e5de2a4bfa2884e56bc0a20840af
The 8x8 DCT uses a fast version whenever possible.
There was a mistake in the checking code which
meant sometimes the fast version was used when it
was not safe to do so.
Change-Id: I154c84c9e2d836764768a11082947ca30f4b5ab7
(cherry picked from commit fd05fb0c21)
This commit refactors the choose_partitioning function. It removes
redundant memset calls and makes the encoder to calculate
variance value per block only when it is needed. It reduces the
average runtime cost of choose_partitioning by 60%. Overall it
reduces speed -6 runtime by 2-5%.
Change-Id: I951922c50d901d0fff77a3bafc45992179bacef9
It is the first version of MFQE in VP9. There are a few TODOs included
in this version.
Usage: Add flag --enable-vp9-postproc to config the project.
In decoder, use flag --mfqe in the command line to enable
MFQE in postproc.
Note: Need to have key frame with low quality to see the effect of this
new patch. In my experiment, I fixed the qindex to 200 in key frame.
Change-Id: I021f9ce4616ed3574c81e48d968662994b56a396
Replace error_resilient flag with use_prev_frame_mvs in
vp9_pick_inter_mode reference motion vector search selection.
This effectively turns off the simplified ref mv search in the
settings of frame resizing, even if error-resilient mode is off.
Change-Id: I7fed814ee7bc0cb419a03b846e0fc2de46ba7686
Update the frame motion vector only if previous frame motion vector
is needed for next frame reference motion vector.
Change-Id: Ica50f9d7b46ad4f815bba0d9e30f5546df29546f
The warning only happens in VP9 encoder's first pass due to src_mi
is not set up yet. But it will not fail the encoder as left_mi and
above_mi are not used in the first_pass and they will be set up again
in the second pass.
Change-Id: I12dffcd5fb1002b2b2dabb083c8726650e4b5f08
This allows us to track decode speed for new encodes so that we catch
problems like an encode change that makes decode really slow.
Change-Id: I92251a8b1f710b241f66e1042413df1b71b76038
This commit enables the use of sub8x8 blocks in RTC key frame
encoding. It requires the block size to be preset and will decide
the coding mode and encode the bit-stream.
Change-Id: I35aaf8ee2d4d6085432410c7963f339f85a2c19b
Rename set_modeinfo_offsets as set_mode_info_offsets, to be more
consistent with naming convention.
Change-Id: I68ca1f36c4a78127d9439a50c1506a2afd07927d
The later encoding process will take the top-left block's
mode_info for pre-determined block size.
Change-Id: I76a90f9ce7f3b2dbc2975b52442114e461c465b5
The restructure moves the decision into the rd pick
modes loop and makes a decision based at the 16x16
block level instead of only the 64x64 level.
This gives finer granularity and better visual results
on the clips I have tested. Metrics results are worse
than the old AQ2 especially for PSNR and this mode
now falls between AQ0 and AQ1 in terms of visual
impact and metrics results.
Further tuning of this to follow.
It should be noted that if there are multiple iterations
of the recode loop the segment for a MB could change
in each loop if the previous loop causes a change in the
complexity / variance bin of the block. Also where a block
gets a delta Q this will alter the rd multiplier for this block
in subsequent recode iterations and frames where the
segmentation is applied.
Change-Id: I20256c125daa14734c16f7cc9aefab656ab808f7
The function vp9_filter_block1d16_h8_ssse3 uses the PSHUFB instruction which has a 3 cycle latency and slows execution when done in blocks of 5 or more on Atom processors.
By replacing the PSHUFB instructions with other more efficient single cycle instructions (PUNPCKLBW + PUNPCHBW + PALIGNR) performance can be improved.
In the original code, the PSHUBF uses every byte and is consecutively copied.
This is done more efficiently by PUNPCKLBW and PUNPCHBW, using PALIGNR to concatenate the intermediate result and then shift right the next consecutive 16 bytes for the final result.
For example:
filter = 0,1,1,2,2,3,3,4,4,5,5,6,6,7,7,8
Reg = 0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15
REG1 = PUNPCKLBW Reg, Reg = 0,0,1,1,2,2,3,3,4,4,5,5,6,6,7,7
REG2 = PUNPCHBW Reg, Reg = 8,8,9,9,10,10,11,11,12,12,13,13,14,14,15,15
PALIGNR REG2, REG1, 1 = 0,1,1,2,2,3,3,4,4,5,5,6,6,7,7,8
This optimization improved the function performance by 23% and produced a 3% user level gain on 1080p content on Atom processors.
There was no observed performance impact on Core processors (expected).
Change-Id: I3cec701158993d95ed23ff04516942b5a4a461c0
Adds decoder config as a changeable parameter to unit tests, and
changes end to end test to use commonly used parameters to enable
base test of tiles encoding and frame parallel decoding.
Change-Id: I5d23a6857303b4d68b92b15c3f2f04a1bcb4c2bb
the flag in the header wasn't being set based on the encoder
configuration in non-intra only mode
broken since:
fbc2fbf Adding oxcf temp variable.
Change-Id: Ib4cff9901889824bc4e68d7f0f6deb1e41df2f53
The initial reset of this_rdc in vp9_pick_inter_mode is not needed,
since it will be re-assign when used.
Change-Id: Ic0e12d741cbab292fc214c1eabb48b129af7839b
Compare the current best mode rate-distortion cost with the skip
threshold to decide if performing motion search.
Change-Id: Ia071824f8dd3b7db485f424692a485a2da6a1a9f
These speed-up features for key frame coding are only turned on
in the settings of hybrid non-RD and RD mode decision. It provides
about 20% speed-up to the hybrid key frame coding at the expense
of certain compression performance loss. For vidyo1, the key frame
coding statistics are changed
9838F, 35.020 dB, 61677 us -> 9920F, 34.834 dB, 47556 us
Overall rtc set compression performance is down by -0.257%.
Change-Id: I0025447fda26bb7855e982955642b5f55d71b51f
When block size is below 16x16, the encoder swap from non-RD to
RD mode for key frame coding. This largely brough back the key
frame compression performance. For vidyo1 at 1000 kbps, the key
frame coding statistics are changed
9978F, 34.183 dB, 36807 us -> 9838F, 35.020 dB, 61677 us
As compared to the full RD case
7187F, 34.930 dB, 214470 us
The overall rtc set coding performance (single key frame setting)
is improved by 1.5%.
Change-Id: I78a4ecf025d7b24ec911e85be94e01da05e77878
Change 72193 made the encoder behave differently
when configured with and without high bitdepth.
This change means the same algorithm is used for both.
Change-Id: I707a44a94afca773a9e0c2f7ebeeea83030257c5
No more checking of corrupted reference frame as we skip
decoding any non-intra frame in case of frame corrupted.
Change-Id: I77d41bbb02fc5f61972740e2d411441eb6a17073
Currently, VP9 supports column-tile encoding, which allows a frame
to be encoded in multiple column tiles independently. The number of
column tiles are set by encoder option "--tile-columns". This
provides a way to encode a frame in parallel.
Based on previous set of patches, this patch implemented the tile-
based multi-threaded encoder. Each thread processes one or more
tiles.
Usage:
For HD clips:
--tile-columns=2 --threads=1/2/3/4
While using 4 threads, tests showed that the encoder achieved
2.3X - 2.5X speedup at good-quality speed 3, and 2X speedup at
realtime speed 5.
Change-Id: Ied987f8f2618b1283a8643ad255e88341733c9d4
Change 71789 renamed CONFIG_VP9_HIGH to CONFIG_VP9_HIGHBITDEPTH.
However, one use of CONFIG_VP9_HIGH was missed.
Change-Id: I0ebb9c71380c6d810a25708d15471abf9533e695
the gtest implementation used only returns values between 0 and 2^31-1
+ temporarily disable some tests in fdct8x8_test which misbehave with the
new range
Change-Id: I45381076f0bea3317cc6728305890e4fd2f2facd
Currently, the configure script checks for x32 by testing just the
__ILP32__ define. However, on "plain" i386, __ILP32__ can also be
defined, for example by clang 3.5.0 and higher. (That gcc does not
define it there, is another issue, but not for this tracker.)
Therefore, extend the check by also checking for __x86_64__, which will
also be defined for x32.
BUG=887
Change-Id: I90ac1d6843caff0416e1dd360c0be3dbaa85c2ae
the gtest implementation used only returns values between 0 and 2^31-1
+ temporarily disable some tests in lpf_8_test which misbehave with the
new range
Change-Id: I8a026680c4b8c12dc14d4f24c33edb2315963114
For key frame at speed 6: enable the non-rd mode selection in speed setting
and use the (non-rd) variance_based partition.
Adjust some logic/thresholds in variance partition selection for key frame only (no change to delta frames),
mainly to bias to selecting smaller prediction blocks, and also set max tx size of 16x16.
Loss in key frame quality (~0.6-0.7dB) compared to rd coding,
but speeds up key frame encoding by at least 6x.
Average PNSR/SSIM metrics over RTC clips go down by ~1-2% for speed 6.
Change-Id: Ie4845e0127e876337b9c105aa37e93b286193405
This commit reworks the ONE_LOOP_REDUCED coefficient probability
model update process. It allows model update for every coefficient
across the spectrum at a coarser resolution, instead of performing
precise update only for certain subset of probability models.
The overall runtime remains nearly same (<1% change) for speed -6.
The compression performance is improved by 7.5% in PSNR for speed
-5 and 4.57% for speed -6, respectively.
Change-Id: Ifb17136382ee7e39a9f34ff4a4f09a753125c8d1
Synchronize all threads immediately as a subsequent decode call may
cause a resize invalidating some allocations.
fixes one aspect of crbug.com/437655
Change-Id: Ie993b62c2756478543206ddbe43ec6268d90a470
Change 72056 unfolded some macro definitions,
but lost some alternative behaviour required for
high bitdepth encodes.
This causes the encoder to crash, see issue 884.
Change-Id: I8ce4d73c9fe0a3c10ccb86fba210fabc8b2f0ccc
Also removes some spurious changes in common/vp9_blockd.h which
was introduced by a rebase issue between nextgen and master branches.
Change-Id: If359f0e9a71bca9c2ba685a87a355873536bb282
(cherry picked from commit 005d80cd05)
(cherry picked from commit 08d2f54800)
(cherry picked from commit 4230c2306c)
This commit makes the codec automatically turn on error resilient
mode when using real-time mode for temporal scalable coding. It
fixes an enc/dec mismatch issue and re-enables the corresponding
unit test.
Change-Id: Ie1f7134e9a78ddd43e9b1555b3ee991c8a3afd0d
AQ2 modified to use mb_av_energy in defining variance
thresholds used alongside complexity when defining the
segment to be used for an SB64.
Slight improvements in metrics (ssim and PSNR).
Change-Id: Idb9cb73f7d9c4f7118cd7e84ac77b0f25cacbf81
Incorporate segment delta-q into estimated bits.
This generally improves the rate control under cyclic refresh (aq=3) mode.
Change-Id: I1dc60fb230e7d08357fae18909d8ed27bf58e037
A hidden enc/dec mismatch bug was accidentally triggered by
https://gerrit.chromium.org/gerrit/#/c/72247/
Adaptively adjust mode test kick-off thresholds in RTC coding
This commit temporarily turns off the broken unit tests to avoid
blocking other CLs while fixing.
Change-Id: I0a0f195030321190ce10879cd833187680576367
Probably not even the dominant platform the library is being built for.
Add --cpu= option description to help. The option already exists.
Don't allow passing just --cpu as a no-op.
BUG=826
Change-Id: Iaa3f4f693ec78b18927b159b480daafeba0549c0
This patch greatly increase the strength of AQ1.
Visual tests show strong gains on many clips but their is a big
hit on psnr.
SSIM is more mixed with some winners and losers.
Change-Id: Idaa5d3b41d8576096bfa000b62bc531c3d8bf6a1
Each tile's tok starting address is calculated before the encoding
process. These addresses are stored so that the same calculation
won't be done again in packing bit stream.
Change-Id: I0a3be0301f002260c19a850303f2f73ebc47aa50
When the golden frame is boosted, the rate correction factor is not
correlated well with other inter frames even in CBR mode. This commit
changes to use GF specific rate_correction_factor when gf_cbr_boost
is greater than 20%.
Change-Id: I6312c1564387bcacc11f4c5e8a9cfdc781b5c3ab
This commit allows the encoder to increase the mode test kick-off
thresholds if the previous best mode renders all zero quantized
coefficients, thereby saving motion search runs when possible.
The compression performance of speed -5 and -6 is down by -0.446%
and 0.591%, respectively. The runtime of speed -6 is improved by
10% for many test clips.
vidyo1, 1000 kbps
16578 b/f, 40.316 dB, 7873 ms -> 16575 b/f, 40.262 dB, 7126 ms
nik720p, 1000 kbps
33311 b/f, 38.651 dB, 7263 ms -> 33304 b/f, 38.629 dB, 6865 ms
dark720p, 1000 kbps
33331 b/f, 39.718 dB, 13596 ms -> 33324 b/f, 39.651 dB, 12000 ms
mmoving, 1000 kbps
33263 b/f, 40.983 dB, 7566 ms -> 33259 b/f, 40.978 dB, 7531 ms
Change-Id: I7591617ff113e91125ec32c9b853e257fbc41d90
This patch modified struct VP9_COMP. Created a struct ThreadData
to include data that need to be copied for each thread. In
multiple thread case, one thread processes one tile. all threads
share one copy of VP9_COMP,
(refer to VP9_COMP *cpi in the code)
but each thread has its own copy of ThreadData,
(refer to ThreadData *td in the code).
Therefore, within the scope of encode_tiles(), both cpi and td
need to be passed as function parameters.
In single thread case, the FRAME_COUNTS pointer in ThreadData
points to "counts" in VP9_COMMON.
Change-Id: Ib37908b2d8e2c0f4f9c18f38017df5ce60e8b13e
The intra mode penalty is covered by intra_cost_penalty. This
commit removes the other intra cost threshold, provided that the
constant 50 is negligible in normal rate-distortion cost.
Change-Id: I9b8b7483c43b9a41741622e7057def1f7d51bb72
This change is made in preparation for a
subsequent patch which adds acceleration
for the highbitdepth transform functions.
The highbitdepth transform functions attempt
to use 16/32bit sse instructions where possible,
but fallback to using the C implementations if
potential overflow is detected. For this reason
the dct routines are made global so they can be
called from the acceleration functions in the
subsequent patch.
Change-Id: Ia921f191bf6936ccba4f13e8461624b120c1f665
(cherry picked from commit 454342d4e7)
This commit makes a non-RD coding mode decision process for key
frame coding. It can be optionally turned on in speed -6 and above.
Change-Id: I0847258b392877a0210b4768bef88ebc9ad009b5
previously 'bit_depth_', which is later used to calculate 'mask_', would
be left uninitialized in non-high-bitdepth builds
Change-Id: Ia72035f4645baf3bb0f191504f491b934cdf1e0e
This commit allows more aggressive decision to skip forward
transform and quantization for luma component in RTC coding mode.
The chroma components remains going through the normal coding
routine, since they are not included in the non-RD mode search
process.
It reduces the runtime cost by 2% - 10%. In speed -6,
vidyo1 1000 kbps
16576 b/f, 40.281 dB, 8402 ms -> 16576 b/f, 40.323 dB, 7764 ms
nik720p 1000 kbps
33337 b/f, 38.622 dB, 7473 ms -> 33299 b/f, 38.660 dB, 7314 ms
dark720p 1000 kbps
33330 b/f, 39.785 dB, 13505 ms -> 33325 b/f, 39.714 dB, 13105 ms
The compression performance of speed -6 is improved by 0.44% in
PSNR and 1.31% in SSIM.
Change-Id: Iae9e3738de6255babea734e5897f29118bebc6d7
In AQ1 a rate adjustment was applied for blocks coded with a
deltaq. This tends to skew the partition selection and cause
rate overshoot.
For example, consider a 64x64 super block where some but not all
sub blocks are in a low q segment and some are in a high q segment.
The choice of Q when considering large partition and transform sizes
is defined by the lowest sub block segment id (currently this implies the
lowest Q). If some parts of the larger partition are very hard this will
cause a high rate component.
The correct behavior here is for the rd code to discard the large partition
choice and break down to sub blocks where some have low and some
have high Q. However the rate correction factor above mask the high
cost of coding at a larger partition size.
Change-Id: Ie077edd0b1b43c094898f481df772ea280b35960
Make the midpoint variance used in AQ mode 1 segmentation
depend on the overall complexity of the frame in two pass.
Change-Id: I452814ec57f7a32352e41bb250e78066abe952dd
By using 0xff for a short it was not setting the high bits. When
comparing the output with vtst to find non-zero elements it was skipping
vaules which had no low bits set such as -512 / 0xFE00.
Using -8191 as the first element of coeff will generate this condition.
BUG=883
Change-Id: Ia1e10fb809d1e7866f28c56769fe703e6231a657
All the assembly code has been removed, the tests no longer check for
the target, and android and chrome do not use the targets.
Change-Id: I193993f7b2b0bd6478453402f573ce3606e04e8d
Add an additional restriction to bit/complexity based
segmentation based on spatial variance.
Only lower Q when both the number of bits spent
in the initial encoding pass and the spatial complexity are
below a threshold. This will prevent the low Q segments
being used just because there is a surfeit of bits.
Small metrics gains especially opsnr.
derf ~0.2% std-hd ~0.3%
Change-Id: I6a8496d466d673f9b0e2b2ca6304ea7b6d8e1cce
This is the first of a series of patches to restructure and
improve AQ mode 1 (variance based AQ).
Change-Id: Idcf693131a3ea2459dcfd957a54a65b971fa4a2a
this was incorrectly set in test.mk by
93ffd37 Enable and fix resize_test for VP9
the test is now available when using --disable-vp9
Change-Id: I6acf44b0de647b34812ef5e18fd96447cdf9b25d
worker hooks return false on error, fix the assignment in Execute() used
in the TestSerialInterface test
Change-Id: I93c2e45f270330ae6d35a3a303411c4ee0f31337
Similar to mask_filter, the filter_cache in RD_OPT struct can be
moved out, and declared as a local variable since it is only
used in pick_inter_mode functions.
Change-Id: I412b99cca82bade07ac912064ec03dd1de6b2c17
Correct calculation of number of mbs in two pass code when
frame resizing is enabled. Always use initial number of mbs if
scaling is enabled, as this is what was used in the first pass.
Change-Id: I49a4280ab5a8b1000efcc157a449a081cbb6d410
The mask_filter in RD_OPT struct is used to record rd result in
filter decision. It is only used in pick_inter_mode functions,
and is removed from the struct and declared as a local variable.
Change-Id: I3c95c8632ba7241591ce00ef2ef5677b5e297d7b
The max_partition_size and max_partition_size are set at the
beginning while setting speed features, and then adjusted at
SB level. Moving them to mb struct ensures there is a local
copy for each thread.
Change-Id: I7dd08dc918d9f772fcd718bbd6533e0787720ad4
VP9/DatarateTestVP9Large.ChangingDropFrameThresh/[34] fails post the
merge of commit#ffa06b37. This commit adds reset of rc tracking info
when frame is dropped, and fixes the causes of the bad interaction
between the tests and the previous commit.
Change-Id: I848acfd9fcb336359662274325190f94aac76eae
This commit reworks the forward transform and quantization process
for 8x8 block coding. It combines the two operations in a single
function to save a store/load stage of the original transform
coefficients. Overall the speed -6 is slightly faster (around 1%
range). The compression performance of speed -6 is improved by
3.4%.
Change-Id: Id6628daef123f3e4649248735ec2ad7423629387
In rare cases, the interaction between rate correction factor and Q
choices may cause severe oscillating frame sizes that are way off
target bandwidth. This commit adds tracking of rate control results
for last two frames, and use the information to prevent oscillating
Q choices.
Change-Id: I9a6d125a15652b9bcac0e1fec6d7a1aedc4ed97e
vp9_quantize_fp is the quantization process used by rtc coding
mode. This commit adds a sse2 implementation of it. The
implementation is modified based on vp9_quantize_b_sse2. No speed
difference from ssse3 version.
Change-Id: I24949c5b27df160b4f35117d28858d269454e64a
Current setting had active_worst_quality set too high (close to worst_quality)
for first frame(s) following first key frame. This changes that to be somewhat
more aggressive in allowing active_worst_quality to be lower following key frame.
Also remove the 4/5 reduction in active_worst for key frame as
this should be set by the user qp_max setting.
Change-Id: I0530b3ddcc85c00e3eb7568de1b14a31206c4a4c
The function pointer in compressor instance does not change, so this
commit changes to call the function directly.
Change-Id: I9c9c460e3475711c384b74c9842f0b4f3d037cc5
This commit adds a check condition to the prediction buffering
operation used in the rtc coding mode. This resolves a unit test
warning in example/vpx_tsvc_encoder_vp9_mode_7.
Change-Id: I9fd50d5956948b73b53bd8fc5a16ee66aff61995
These 2 members in RD_OPT were moved to TileDataEnc struct
already, and therefore were removed here.
Change-Id: I22fee3b67f96e473a58e194a7edc76dbd48bfa04
Several frame counters in encoder are updated at SB level. Combine
those counters and put them in a separate struct, which allows us
to allocate one copy for each thread.
Change-Id: I00366296a13c0ada4d8fa12f5e07728388b6cab7
Modified VP9_COMP struct to include MACROBLOCK *mb. This change
makes it feasible in multi-thread case to allocate a mb for each
thread.
Change-Id: I624d6d1aa9c132362200753e5d90b581b1738d6e
A flush bug is discovered during putting frame parallel decoder
into Android. This test will expose that bug.
Change-Id: Ia047f27972f4da0471649f79f1f91e7695297473
Two members in struct CYCLIC_REFRESH
int64_t projected_rate_sb;
int64_t projected_dist_sb;
are updated at the superblock level, which makes them shared data
in the multi-thread situation, and requires extra work to handle
them. However, those values are updated and used immediately, and
therefore can be removed. This patch cleaned up the code and
removed the two members.
Change-Id: I2c6ee4552bf49fb63ce590cdb47f9723974fffb1
Prepare for the introduction of frame-size change
logic into the recode loop.
Separated the speed dependent features into
separate static and dynamic parts, the latter being
those features that are dependent on the frame size.
Change-Id: Ia693e28c5cf069a1a7bf12e49ecf83e440e1d313
Add extra vp9_clear_system_state() calls to fix
double / mmx issue introduced into first pass
code for 32 bit builds.
Change-Id: I84cd2986b80d83650a091ab25c43755efeb82e03
This reverts commit 7d07f512cd.
this breaks visual studio builds:
'#' : invalid character : possibly the result of a macro expansion
Change-Id: I77170d549afb71e75a878fa0f6acd204fe8d9e67
Rate correction factor is used to correct the estimated rate for any
given quantizer, and feeds into rate control for quantizer selection.
We make use of the actual bits used to calculate this rate correction
factor with an adjustment limit to prevent over-adjustment.
This commit adapts the adjustment limit to the difference between the
estimated bits and the actual bits, allows the adjustment limit to vary
between 0.125 (when estimate is close to actual) and 0.625 (when there
is >10X factor off between estimated and actual bits). By doing this,
the commit appears to have largely corrected two observed issues:
1. Adjustment is too slow when the actual bits used is way off from
estimate due to the small adjustment limit.
2. Extreme oscillating quantizer choices due to the feedback loop.
Change-Id: I4ee148d2c9d26d173b6c48011313ddb07ce2d7d6
This commit makes the speed -6 and above use the reconstructed
boundary pixels for precise intra prediction. This allows more
intra prediction modes to be tested in the non-RD coding process.
Enabling horizontal and vertical intra prediction modes can
improve the speed -6 compression performance for rtc set
by 0.331%.
Change-Id: I3a99f9d12c6af54de2bdbf28c76eab8e0905f744
I0c5f010 changed to allow update golden reference buffer in CBR mode,
this commit changes the use of rate_correction_factor for those frames
to be aligned with the new usage. This commit attempts to solve two
issues:
a. Initialization of rate correction factor for Golden Frame
Prior to this patch, even the regular inter frame has been update
the rate correction factor based on content and encoding results,
the first golden frame would still use the ininitialized value
that can be way off.
b. Allowing rate correction factor update to be slightly faster
Prior to this patch, when the rate correction factor is off, the
update to the factor is too slow, the factor could not get close
to a semi-correct value even after many frames.
The commit helps all clips in psnr/ssim metric, but especially to
a few clip in RTC set that rate correction was way off. For example
thaloundeskmtgvga gained about .5dB for both overall/average psnr.
Change-Id: I0be5c41691be57891d824505348b64be87fa3545
Adds support for one-pass rc-enabled SVC encoder with callbacks for
getting per-layer packets.
- the callback function registration is implemented as an encoder
control function.
- if the callback function is not registered, the old way of
aggregating packets with superframe will take effect.
- one more control function “VP9E_GET_SVC_LAYER_ID” has been
implemented to get the temporal/spatial id from the encoder
within the callback. This can be used to get the ids to put on RTP
packet.
Change-Id: I1a90e00135dde65da128b758e6c00b57299a111a
This commit rename a reserved color space entry to BT_2020, it intends
to provide support for VP9 bitstream to pass along the color space
type defined in BT.2020(Rec.2020)
please note this entry does not have any effect on encoding/decoding
behavior, but allow applications to the pass the information along
from encoding end to decoding end.
Change-Id: I4678520e89141ea5e8900f7bd1c0e95b710b7091
This commit integrates the non-RD mode decision process and the
encoding process into a single recursion scheme.
Change-Id: I6a7e72a0b84d567554801ebbe01ec75d54c1f77d
The obj_int_extract code is no longer worth maintaining. It creates
significant issues when adapting for different build systems and no
longer offers as significant of a performance benefit due to
improvements in intrinsics.
Source files will remain until the various third-party builds are updated.
The neon fast quantizer has been moved to intrinsics. The armv6 version
has been removed because so few remaining targets require it.
Compilers and processors have improved significantly since the
pack_tokens code was written. The assembly is no longer faster than the
C code.
pack_tokens were the only optimizations for the armv5te targets so the targets
will be removed after the test infrastructure has been updated.
BUG=710
Change-Id: Ic785b167cd9f95eeff31c7c76b7b736c07fb30eb
This patch was to fix the vpxdec fuzzing3 test failure. When an
error occurs, setjmp() is invoked, which calls the decoder
removing routine. In multiple thread situation, other threads
could try to access the frame context memory that is already
deallocated, thus causing a segfault.
An invalid unit test was added for this issue.
Change-Id: Ida7442154f3d89759483f0f4fe0324041fffb952
The aim of this patch is to apply a positive weighting to
frames that have a significant number of blocks that are
of low spatial complexity and are dark. The rationale behind
this is that artifacts tend to be more visible in such frames.
In this patch the weight is only applied in regard to the distribution
of bits between frames. Hence if all the frames share similar
characteristics (as is the case for most of our short test clips) there
will be little or no net effect.
However, the effect can be seen on some longer form test content.
For example Tears of steel baseline test:
2323.09 Kbit/s opsnr 39.915 ssim 74.729
With this patch:-
2213.34 Kbit/s opsnr 39.963 ssim 74.808
(Sligtly better metrics and about 5% smaller)
The weighting may well need some further tuning along side changes
to the aq modes.
Change-Id: Ieced379bca03938166ab87b2b97f55d94948904c
This commit removes the cyclic aq mode dependency on
in_static_area and reworks the corresponding cut-off thresholds.
It improves the compression performance of speed -5 by 1.47% in
PSNR and 2.07% in SSIM, and the compression performance of speed
-6 by 3.10% in PSNR and 5.25% in SSIM. Speed wise, about 1% faster
in both settings at high bit-rates.
Change-Id: I1ffc775afdc047964448d9dff5751491ba4ff4a9
the offending assembly code was deleted in:
08e38f0 VP8 for ARMv8 by using NEON intrinsics 14
the intrinsics currently pass.
fixes issue #725
Change-Id: I43e4263bef21f9d9008c51ffdfa39fcf10b8e776
This will save the memory and improve the decode speed due to
removing unnecessary memset of big prev_mi array for
all the key frames.
Decoding a all key frames 1080p video shows speed improve around 2%.
Change-Id: I6284a445c1291056e3c15135c3c20d502f791c10
The test filter is not a prefix matcher. It requires test type to
contain no more than the optimization type. In this example, SSSE3_64
fails to match and the test is not skipped even when SSSE3 is not
available.
Change-Id: Ia74229a167c88da4e6da169012a7a77d438c3f75
Check that the numerator is not zero. If it is, guess 30fps.
Fixes a clang IOC error in the quantize test. It's very unlikely for
this to occur in the wild because the setup in the quantize test is very
nonstandard.
Change-Id: Icdab7b81d4e168d3423e14db20787f960052e0c3
This commit makes the RTC coding mode to conditionally skip the
reference frame mode search, when the predicted motion vector of
the current reference frame gives more than two times sum of
absolute difference compared to that of other reference frames.
It reduces the runtim by 1% - 4% for speed -5 and -6. The average
compression performance is improved by about 0.1% in both settings.
It is of particular benefit to light change scenarios. The
compression performance of test clip mmmovingvga.y4m is improved by
6.39% and 15.69% at high bit rates for speed -5 and -6, respectively.
Speed -5
vidyo1 16555 b/f, 40.818 dB, 12422 ms ->
16552 b/f, 40.804 dB, 12100 ms
nik 33211 b/f, 39.138 dB, 11341 ms ->
33228 b/f, 39.139 dB, 11023 ms
mmmoving 33263 b/f, 40.935 dB, 13508 ms ->
33256 b/f, 41.068 dB, 12861 ms
Speed -6
vidyo1 16541 b/f, 40.227 dB, 8437 ms ->
16540 b/f, 40.220 dB, 8216 ms
nik 33272 b/f, 38.399 dB, 7610 ms ->
33267 b/f, 38.414 dB, 7490 ms
mmmoving 33255 b/f, 40.555 dB, 7523 ms ->
33257 b/f, 40.975 dB, 7493 ms
Change-Id: Id2aef76ef74a3cba5e9a82a83b792144948c6a91
This commit unfolds the legacy macro definitions used in the
sub-pixel motion search and refactors the operational flow for
later optimizations.
Change-Id: I3e3f770cad961d03d1a6eb0b2a0186cc77eaf2b8
The current logic was allowing for disabling golden refresh only
for two pass svc encoding. This change disables it as long as
more than 1 layer encoding is used (for example temporal layers under 1pass CBR).
Change-Id: I4dc5204a7ad365c821ec7963e93b59da82e1826b
In the function mb_lpf_horizontal_edge_w_avx2_16 the usage of the intrinsic
_mm256_cvtepu8_epi16 cause a compiler bug in gcc 4.9.1.
until it will be fixed I created a workaround that create the up convert by
using broadcast128+shuffle.
The bug was reported here:
https://code.google.com/p/webm/issues/detail?id=867
Change-Id: I73452e6806f42e0fadcde96b804ea3afa7eeb351
A recent change has introduced big quality drops for speed 7 and 12
for --rt mode. The change reverted the big drop and improved quality
by 9.5% for speed 7 and 13.4% for speed 12.
Change-Id: I07b82e3bb6002a73af486a083458c88877bdad01
This will save a lot of memory for decoder due to removing of prev_mi,
but prev_mi is still needed in encoder. So this will increase a little bit
memory for encoder.
Change-Id: I24b2f1a423ebffa55a9bd2fcee1077dac995b2ed
Use intrinsics for neon quantization. Slight loss (<5%) of performance
compared to the assembly. Roughly 10x faster on arm64 because that was
running C code before.
Change-Id: I7cf5242d8f29b7eab5bca6a1c20c89c9fc9ca66d
This commit makes the inter prediction buffer system to support
hybrid partition search. It reduces the runtime of speed -5 by
about 3%. No compression performance change.
vidyo1 720p 1000 kbps
11831 ms -> 11497 ms
nik 720p 1000 kbps
10919 ms -> 10645 ms
Change-Id: I5b2da747c6395c253cd074d3907f5402e1840c36
Combined vp9_denoiser_8xM_sse2 and vp9_denoiser_4xM_sse2 into one
function vp9_denoiser_NxM_sse2_small and passed the bitexact testing.
Changed the name of the function vp9_denoiser_64_32_16xM_sse2 to
vp9_denoiser_NxM_sse2_big.
Change-Id: Ib22478df585994dd347ebae04202c0b701e7f451
This commit changes to allow the usage of golden reference frame in
VP9 CBR mode to improve quality. VP9 supports potentially up to 8
reference buffers, it has reference buffers available for this
purpose. This was not possible in VP8 as golden and alt-ref buffers
were used for temporal scalability purpose in CBR mode in WebRTC.
For frames that update golden frame, there can be a quality boost.
The amount of allowed bitrate boost can be controlled via parameter
rc_max_inter_bitrate_pct. The inital value of the boost ratior is
currently based on over_shoot_pct. Further experiments will work
out the adaption of this boost value.
Change-Id: I0c5f010c8fd8b7b598f69779c1b30e5b2ac30a4d
Added code to relax the active maximum Q in response
to extreme local overshoot to reduce bandwidth peaks.
The impact is small in metrics terms, but it this helps reduce
bandwidth spikes and overall overshoot in a number of
clips in our tests sets (especially the YT test set).
In particular this should help prevent very big spikes where a clip
is mainly easy but has a short hard section. In such a case a choice
of maximum Q for the clip as a whole may allow us to hit the overall
target rate but give some extreme spikes. The chunked encoding in YT
mitigates this problem but it can show up where a longer clip is
coded as a single chunk.
Change-Id: I213d09950ccb8489d10adf00fda1e53235b39203
The zero motion vector was effectively used in the subsampled pixel
based variance calculation. This commit makes it directly use zero
mv to generate prediction.
Change-Id: Ica83dc843e9f8da2f89c3ef451e50f16214c0def
0 means that golden boost is off, and uses average frame target rate,
a non-zero number means the percentage of boost over average frame
bitrate is given initially to golden frames in CBR mode.
Change-Id: If4334fe2cc424b65ae0cce27f71b5561bf1e577d
-Use full bandwidth (when temporal layers is on) for checking switching.
-Normalize metric wrt num_blocks.
-Rounding fix to update of average noise level metric.
-Make default internal denoiser mode == kDenoiserOnYUV (in denoiser set_parameters()).
-Adjust some thresholds.
Change-Id: Ib827512b25a7bf1f66c76d3045f3a68ce56b1cd2
The point at which frames are scaled to their
coded dimensions is moved into the re-code loop.
This is in preparation for a further patch that
will add logic into the re-code loop to reduce
the coded frame size if the encoder is struggling
to hit the target data rate at the native frame
size.
Change-Id: Ie4131f5ec6fb93148879f6ce96123296442bf2d1
Add second level arf Q adjustment when using dual arfs
in constant Q mode.
Previously in constant Q mode enabling dual arf hurt by ~5%
but with this change the average benefit is ~1-1.5% with some
mid range data points up ~10%.
Note however that it still hurts on some clips including
some very low motion show content.
Change-Id: I5b7789a2f42a6127d9e801cc010c20a7113bdd9b
This patch allocated frame contexts outside VP9_COMMON. This allows
multiple threads to share the same copy of frame contexts, and
reduces the overhead. It also guarantees the correct update of
these contexts during bitstream packing. This patch doesn't change
encoding result.
Change-Id: Ic181a2460b891d1d587278a6d02d8057b9dbd353
The initialization of this_mode_pred does not work when the ref_frame
loop ever goes beyond LAST_FRAME. This commit fixes the subtle issue
and allows potentially expanding the loop to test GOLDEN_FRAME.
Change-Id: Ibbd427a22160d1d9eacb8ed0c87f88d6cef9c0f3
Using 4 threads, frame parallel decode is ~3x faster than single thread
decode and around 30% faster than tile parallel decode for frame parallel
encoded video on both Android and desktop with 4 threads. Decode speed is
scalable to threads too which means decode could be even faster with more threads.
Change-Id: Ia0a549aaa3e83b5a17b31d8299aa496ea4f21e3e
This commit refactors the rate distortion structure used in the
non-RD coding mode and saves a few RDCOST calculations.
Change-Id: I62c3416c300d2c5372f21b96d93a6b633a34ab3a
The existing speed features produce horrible encoding results, almost
30% worse than cpu-used=4, this commit adjust the speed features to
produce relatively resonable results to be within 3%-5% of cpu-used=4.
Change-Id: I0ca6ebafb33024d4a0cbcf04c78a4a00b8dd1ecf
Its functionality has been replaced with choose_partitioning and
threshold based control on split mode check.
Change-Id: Ic9bb321df06b524f5c38ea5874dc6f6a8f93c5e3
This speed feature has been deprecated in both yt and rtc coding
modes. This commit removes the related operations.
Change-Id: I079c79c6adafe45581af2ebf8b98faebcface1ce
This commit re-designs the recursive partition search scheme in
rtc speed -5. It first checks if the current block is under cyclic
refresh mode. If so, apply recursive partition search. Otherwise,
perform sub-sampled pixel based partition selection. When the
pre-selection finds the partition size should be 32x32 or above,
use the partition size directly. Otherwise, apply partition search
at nearby levels around the preset partition size.
It is enabled in speed -5. The compression performance of rtc
speed -5 is improved by 9.4%. Speed wise, the run-time goes slower
from 1% to 10%.
nik_720p, 1000 kbps
33220 b/f, 38.977 dB, 10109 ms -> 33200 b/f, 39.119 dB, 10210 ms
vidyo1_720p, 1000 kbps
16536 b/f, 40.495 dB, 10119 ms -> 16536 b/f, 40.827 dB, 11287 ms
Change-Id: I65adba352e3adc03bae50854ddaea1b421653c6c
Extend --auto-alt-ref from parameter so we can use it to
turn multi-arf on and off from the command line.
For now the range is 0-off, 1-on, 2-multi-arf on.
Rename play_alternate to enable_auto_arf
Change-Id: Id7b64407cfbe76ba0090a83b588a03e22a240386
All sad function that process above 32 consecutive elements are optimized
for AVX2:
vp9_sad64x64
vp9_sad64x32
vp9_sad32x64
vp9_sad32x32
vp9_sad32x16
vp9_sad64x64_avg
vp9_sad64x32_avg
vp9_sad32x64_avg
vp9_sad32x32_avg
vp9_sad32x16_avg
The functions that appeared as a hotspot is vp9_sad32x32 and vp9_sad64x64
vp9_sad32x32 was optimized by 68% and vp9_sad64x64 was optimized by 90%
both of them gave and overall ~2.3% user level gain
Change-Id: Iccf86b375a2b54c5fbbe685902ead0c9a561b9fd
Currently, the tokens for a tile are stored immediately after its
preceding tile, which causes a dependency. This is unnecessary
since we always allocate enough memory for tokens. Removing
the dependency allows token writing done in parallel. This patch
doesn't change encoding result.
Change-Id: I7365a6e5e2c2833eb14377c37e1503c9d0f26543
This should be set right after decoder really start to decode frame
instead setting at the end.
Even decoder does not have a displayable frame to show and return NULL
to application, this should be set too.
Change-Id: If0313a834bc64e3b0f05a84f4459d444d9eab0d8
When early termination is triggered, properly reset the rate cost
to invalid value to avoid potential ioc issue.
Change-Id: I3444390be2e49a34bb02cf8a74c33d5dbd96d88d
Delete gfboost_qadjust() and move Q based adjustment
into calc_frame_boost(). Also remove clamping. Making
the adjustment here means that it influences not just the
boost level but also the selection of the GF/ARF interval.
This change gives a small average gain in PSNR but
larger gains in SSIM, especially for harder std-hd set (1.5%)
Change-Id: I3aa81b8feccaeff93d915e19fb9cf5cd64c86327
Covers all profiles and input formats. The tests check if the
encode succeeds and if the psnr is sane.
Change-Id: I195a5330debf92562846121819b6eaf961e27c01
This commit fixes an ioc issue that will happen when the cumulative
variables are not in effective use. The fix discards these
redundant additions.
Change-Id: Idbac5bfb989c0cedc5f8a323effce938519b2457
this removes an assumption that worker->data1 would be pointing to a
TileWorkerData allocation.
additionally, within the multi-threaded loopfilter pass VP9LfSync as a
parameter to the worker hook, removing the need for a shadow pointer in
LFWorkerData.
Change-Id: Ic7b2faa34e3eb59dbcb8a7c67f333448fa047c88
move them from VP9Worker::data[12] to allow the structure to be reused a
bit more naturally by the multi-threaded loopfilter.
Change-Id: I31b49c9e93ca744fd7f6d6ed8696671188fb2c1d
This removes an unnecessary restriction that causes
a problem (noticed by AWG) when the forced key frame
interval is set to a very small value, such as 10. In this case
we were being forced to code minimal length GF groups.
Change-Id: I76ef5861a09638ff51f61fea02359554184ada53
We encode a empty invisible frame in front of the base layer frame to
avoid using prev_mi. Since there's a restriction for reference frame
scaling factor, we have to make it smaller and smaller gradually until
its size is 16x16.
Change remerged.
Change-Id: I9efab38bba7da86e056fbe8f663e711c5df38449
This reverts commit 452dc21500.
This change has introduced a significant quality regression on content
with forced key frames. (e.g. the YT and yt-hd set). It is most
noticeable in static content where the kf bits dominate. Here, despite
key frames being apparently coded at the same Q, there is a drop in all
metrics of ~20% (e.g clXR and BFa0).
Change-Id: Iba14cc61778c0846fa0a59c33c55a9fc49512cb4
Compare the estimated rate and distortion to the thresholds scaled
according to the operating block size and determine if further
split partition search will be run. The compression performance of
speed -5 is changed by -0.074%. The encoding speed is 10% - 15%
faster.
vidyo1 720p
16545 b/f, 40.492 dB, 11475 ms -> 16535 b/f, 40.486 dB, 10100 ms
nik720p
16624 b/f, 36.310 dB, 10071 ms -> 16617 b/f, 36.313 dB, 8346 ms
Change-Id: Ic9197ab5761279ae55d2fb7813b2af0e0db497b8
Reduce the intra_cost_penalty for non-rd mode,
and some updates to VAR_BASED_PARTITION.
Visual tests show some improvement at Speed 6, for RTC clips.
Change-Id: If9090daf7aed14906a32d931a538ab544bbca606
This commit replaces the use of copy_partitioning with
choose_partitioning based on the sse of subsamped pixels, which
provides significantly better coding performance and runs at
similar speed, as compared to copy_partitioning. It improves rtc
speed 5 coding performance by 3%.
Change-Id: I52d3682a12dce0147f5e52383a594fc242ca3228
this change checks that CONFIG_SPATIAL_SVC is defined and adds a TODO to
ensure this is changed in the future as the release headers can't
depend on vpx_config.h.
vpx/vpx_encoder.h:164:5: warning: "CONFIG_SPATIAL_SVC" is not defined
[-Wundef]
Change-Id: I797a0150e5f56caf048e7ee00b282fbc9c5ede19
We encode a empty invisible frame in front of the base layer frame to
avoid using prev_mi. Since there's a restriction for reference frame
scaling factor, we have to make it smaller and smaller gradually until
its size is 16x16.
Change-Id: I60b680314e33a60b4093cafc296465ee18169c19
Move the point at which input frames are scaled
into the recode loop. This will allow us to change
the coded frame size dynamically in response
to previous attempts to encode the frame at a
higher resolution.
A following patch will implement a scheme for
resizing the frame in the recode loop.
Change-Id: I6a59c02d6ac1626512edad6de8b60063b79433e6
This commit makes a struct that contains rate value, distortion
value, and the rate-distortion cost. The goal is to provide a
better interface for rate-distortion related operation. It is
first used in rd_pick_partition and saves a few RDCOST calculations.
Change-Id: I1a6ab7b35282d3c80195af59b6810e577544691f
Add a test vector to show the cases where segmentation map is preserved
from frome to frame as outlined in the inquiry in issue 761.
Change-Id: I630c6aba27d0d0b109cc7fd7c6fcd008222a0cf3
Add back clamp which ensures that the Q adaptation
is turned off when the over_shoot_pct and under_shoot_pct
parameters are set to 100.
Change-Id: Id0161b114d39a3029cd3eb28020caab0c3914922
Allow min and maxQ to creep when the undershoot
or overshoot exceeds thresholds controlled by the
command line under_shoot_pct and over_shoot_pct
values.
Default is 100%,100% which ~disables adaptation.
Derf results for example undershoot% / overshoot%:-
Head:- Mean abs (%rate error) = 14.4%
This check in:-
25%/25% - Mean abs (%rate error) = 6.7%
PSNR hit -1% SSIM -0.1%
5% / 5% - Mean abs (%rate error) = 2.2%
PSNR hit -3.3% SSIM - 1.1%
Most of the remaining error and most of the quality hit is
at extreme data rates. The adaptation code still has an
exception for material that is in effect static so that we
don't over adjust and over spend on YT slide show type
content.
(Rebase of If25a2449a415449c150acff23df713e9598d64c9
to resolve a auto-merge error)
Change-Id: Iec4e1613ef0d067454751d8220edb7058dfbd816
use arg_parse_enum_or_int like vpxenc. this also fixes a warning as
arg_parse_enum is not currently declared in args.h.
Change-Id: If9ce258d6adb6286eb86f529083929d5fe2b3a56
Allow min and maxQ to creep when the undershoot
or overshoot exceeds thresholds controlled by the
command line under_shoot_pct and over_shoot_pct
values.
Default is 100%,100% which ~disables adaptation.
Derf results for example undershoot% / overshoot%:-
Head:- Mean abs (%rate error) = 14.4%
This check in:-
25%/25% - Mean abs (%rate error) = 6.7%
PSNR hit -1% SSIM -0.1%
5% / 5% - Mean abs (%rate error) = 2.2%
PSNR hit -3.3% SSIM - 1.1%
Most of the remaining error and most of the quality hit is
at extreme data rates. The adaptation code still has an
exception for material that is in effect static so that we
don't over adjust and over spend on YT slide show type
content.
Change-Id: If25a2449a415449c150acff23df713e9598d64c9
Function will jump to error handler when ref buffer is corrupted.
So "xd->corrupted |= ref_buffer->buf->corrupted;" is useless.
Change-Id: I35353a0637ad0dbb682454e040ef69fa68280bfa
- Some fixes to surface fit.
- Returns variance function as cost rather than sad in the
pattern search and diamond search functions. Only
vp9_pattern_search_sad function used in bigdia search
uses sad as integer 1-away costs.
- Deploys SUBPEL_TREE_PRUNED_MORE for speed 4+.
Results:
derf [Speed 3]: About +0.036% in coding efficiency without any
discernible speed loss.
derf [Speed 4]: About 2-3% faster at -0.199% loss in coding efficiency.
derf [Speed 5]: About 3-4% faster at -0.149% loss in coding efficiency.
Change-Id: I8462f94f6adb46966ca964f2bd0400977357fd63
In model_rd_for_sb function, the spatial domain SSE and variance
are checked to see if transform coefficients are quantized to 0.
Besides that, this patch adds another set of thresholds that are
much more strict. These thresholds are used to conduct a partition
block level check to measure if all its TX blocks are skippable
for YUV planes. If it is true, x->skip is set for this partition
block, and thus its mode search is terminated.
This speeds up the encoding at very low prediction error case,
such as screen sharing application. This patch covers what
rd_encode_breakout_test() does, so that function is removed.
Borg test at speed 3 shows:
For stdhd set, psnr: +0.008%, ssim: +0.014%;
For derf set, psnr: +0.018%, ssim: +0.025%.
No noticeable speed change.
Change-Id: I4e5f15cf10016a282a68e35175ff854b28195944
If the GOLDEN or ALTREF frame was last updated > x frames in the past,
don't use them for denoising (only consider LAST). Using an old reference
frame for denoising, e.g., if it is a long-term reference or the last key frame,
can cause some visible artifacts, in particular in the aggressive denoising mode.
Change-Id: I239c9fbb092c36cba7e95328f1fa67a58d6a7ed9
For input source with size that is not multiple of 8, the size is
rounded to 8 and saved in width or height, the original source sizes
are saved in crop_width and crop_height. This commit corrects the
computation of bottom and right extension amounts to use the orignal
sizes, hence crop_width and crop_height.
In addition, this commit also adds the missed initialization for
uv_crop_width and uv_crop_height.
This addresses issue #834
Change-Id: I084543ca7645a4964b88f7cf8ff668f517d3a39b
The concept:
There's too much noise in source pixels for variance and at low bitrate
the reconstructed looks nothing like the source so we have problems
getting good partitionings with either. This skirts the issue by using
a box blur scaled down version for variance calculations. To compare
against source_var_ moved keyframe to be rd based like source_var.
Change-Id: Ie3babdbfadae324b7b5a76bea192893af27f0624
This commit breaks the overly broad header files into more
targeted and smaller ones, to help better structure the system
layout.
Change-Id: I7b24559d3ea6e582cf5d9bbe8f71459f9824d71b
Fixed an encoder crash. Set skip_txfm to 0 for cases that skip_txfm
isn't calculated. Put memcpy of skip_txfm at right place.
Change-Id: Ib3b6afc1b251a85b2a853c8138fb3393f48cfef6
The functions b_width_log2 and b_height_log2 only do direct
table fetch. This commit unifies such use cases by using the
table directly and removes these functions.
Change-Id: I3103fc6ba959c1182886a2799d21b8b77c8a7b6b
Add comments on the use case of these definitions. Further reduce
the scope of header file in vp9_context_tree.h.
Change-Id: Ic4a7638e838d0ac441b64abfc56e57354c059d75
The coefficient range checking is enabled when configured with
--enable-debug --enable-coefficient-range-checking
for vpxdec to detect ill-formed input stream. This addresses the
problem raised by issue #792.
Change-Id: I3f9ea541de4dc742dd64389d6c5f543fb1c4f052
This commit fixes a buffer pointer mis-use in store_coding_context.
The compression performance for stdhd set of speed 3 is improved by
0.097%. It fixes issue 869.
Change-Id: Idc59e22035eaf39f7133ca04174894374d647ff7
This SSE2 is based on VP8 denoiser's SSE2 code. In VP8, there are
only 16x16 blocks in denoiser, while in VP9, there are 13 different
block sizes.
By adding this SSE2 code, the improvement of encoder speed is around
20%(using C code vs using SSE2 code), vary for different clips.
The unit test for VP9 denoiser is to confirm that the SSE2 code is
bit-exact with the C code. The unit test covers all block size.
Change-Id: Ic8d8ac26db4ea40a5f146b5678a065af07eaaa3d
Adjustments to the GF interval choice and minimum boost.
Adjustment to the calculation of 2 pass worst q.
Compared to 09/29 head there is metrics hit on derf of
(-0.123%,-0.191%)
Compared to the September 29 head and a baseline on
September 18 baseline the accuracy of the VBR rate control
measured on the derf set is as follows:-
Mean error % / Mean abs(error %)
Sept 18 baseline (-7.0% / 14.76%)
Sept 29 head (-15.7%, 19.8%)
This check in (-1.5% / 14.4%)
The mean undershoot is reduced slightly but the
worst case overshoot on e.g. harbour/highway is
increased. This will be addressed in a later patch.
Change-Id: Iffd9b0ab7432a131c98fbaaa82d1e5b40be72b58
It is possible that the GOLDEN reference frame is not avaiable, in
which setting the predicted mv will be associated with a residual
value of INT_MAX. This commit checks this condition before
left shift and comparison with that of ALTREF frame, to avoid
overflow issue.
Change-Id: Ib98c3149dbdd016f2fe5beaafb13f67d469dd07c
This commit adds proper initialization of segment id for variance AQ
mode in non-rd coding path. It fixes the enc/dec mismatch issue of
rt=7 with --aq-mode=1, as reported in issue #816
Change-Id: I02fa41b96345bf2e66077d5ea553f85ba800f7bb
This commit enables the encoder to skip split partition search if
the bigger block size has all non-zero quantized coefficients in low
frequency area and the total rate cost is below a certain threshold.
It logarithmatically scales the rate threshold according to the
current block size. For speed 3, the compression performance loss:
derf -0.093%
stdhd -0.066%
Local experiments show 4% - 20% encoding speed-up for speed 3.
blue_sky_1080p, 1500 kbps
51051 b/f, 35.891 dB, 67236 ms ->
50554 b/f, 35.857 dB, 59270 ms (12% speed-up)
old_town_cross_720p, 1500 kbps
14431 b/f, 36.249 dB, 57687 ms ->
14108 b/f, 36.172 dB, 46586 ms (19% speed-up)
pedestrian_area_1080p, 1500 kbps
50812 b/f, 40.124 dB, 100439 ms ->
50755 b/f, 40.118 dB, 96549 ms (4% speed-up)
mobile_calendar_720p, 1000 kbps
10352 b/f, 35.055 dB, 51837 ms ->
10172 b/f, 35.003 dB, 44076 ms (15% speed-up)
Change-Id: I412e34db49060775b3b89ba1738522317c3239c8
Incorporates the WRAPLOW macro into the non-highbitdepth transforms
to aid hardware verification between a software C model and an
intended hardware implementation though the use of the configure
options: --enable-experimental --enable-emulate-hardware.
Note that to avoid further discrepancies between the sse/sse2
implementations of the transforms and the C implementation, when the
emulate hardware option is invoked, we also disable sse/sse2/etc.
Also incudes some minor cleanups/renaming etc.
Change-Id: Ib864d8493313927d429cce402982f1c8e45b3287
Miscellaneous bug-fixes for high bitdepth functionality.
With this patch, high bit-depth profiles become mostly functional,
except for an intermittent assert failure issue that is being
tracked.
Change-Id: I6a7fcbdcf1e5b09842e88535f8442d2e1230748c
- iphonesimulator: IOS_VERSION_MIN was declared in the wrong place.
- armv6: linking via ld instead of CXX is basically required.
Change-Id: Iad187691f633dcf2bc3e3590e88084bb926edb76
This commit removes unused header file vp9_onyxc_int.h and repeatedly
included file vpx_ports/mem.h from vp9_block.h
Change-Id: I400b210bd1da48f1880bd50a8f4a6e2c690e15a1
Block transform skipping was implemented based on DCT's energy
conservation property. Modified the thresholds using zero bin
parameters. AC and DC coefficients were checked separately to
allow better identifying of skippable blocks.
Borg test at speed 3 showed:
stdhd set: psnr gain: 0.153%, ssim gain: 0.051%;
derf set: psnr gain: 0.023%, ssim gain: 0.036%
For most test clips, the encoding speedup is 1% - 2%.
parkrun(720p): 7.5% speedup, park_joy(1080p): 3.5% speedup.
Change-Id: If28eb81113a077414f5ca7b021c14f9069b373bb
The commit cleans up the header files in vp9_entropymv.h. This
file should only depend on vp9_mv.h and vp9_prob.h. Remove the
giant vp9_blockd.h from header file list.
Change-Id: I44cd26d2cfd10a16a9325778347dd53f888a874c
For regular inter frames, if the distance from GOLDEN_FRAME is larger
than 2 and if the predicted motion vector of LAST_FRAME gives lower
sse than that of GOLDEN_FRAME, skip the GOLDE_FRAME mode checking in
the rate-distortion optimization. It provides about 5% speed-up at
expense of -0.137% and -0.230% performance down for speed 3. Local
experiment results:
pedestrian 1080p 2000 kbps
66712 b/f, 40.908 dB, 113688 ms ->
66768 b/f, 40.911 dB, 108752 ms
blue_sky 1080p 2000 kbps
51054 b/f, 35.894 dB, 70406 ms ->
51051 b/f, 35.891 dB, 67236 ms
old_town_cross 720p 1500 kbps
14412 b/f, 36.252 dB, 60690 ms ->
14431 b/f, 36.249 dB, 57346 ms
Change-Id: Idfcafe7f63da7a4896602fc60bd7093f0f0d82ca
Commit message longer than commit edition.
Simulator and devices:
Add a common minimum iOS version that can be shared by iOS and iOS
simulator targets.
Fix --enable-debug (for device targets; sim was fine):
Allow for successful configuration and build with --enable-debug when
CXX is available by:
- Using CXX as LD (when CXX is available).
- Passing the correct form of the iOS minimum version parameter based on
whether LD is CXX or really is ld.
Note: ld -g still won't work on macosx with this patch, so if CXX is not
available, configuration will still fail reporting that the toolchain
cannot link executables when attempting to pass --enable-debug (because
ld returns an error code since the one included with xcode doesn't
support the -g argument).
Change-Id: Ia488aed167cc2ca82ee9e980589fb76dddce634f
Moves transform type defines to vp9_common.h from vp9_idct.h
so that they can be included in vp9_rtcd_defs.pl safely.
Change-Id: Id5106227bee5934f7ce8b06f2eb9fa8a9a2e0ddb
fixes --enable-coefficient-range-checking --enable-debug
vp9_idct.h has references to INT16_MIN/MAX; this header is included in
c++ source so needs to request the macros
Change-Id: I2e643eb973c2d84729fa3cf2f4c4d8bf65cfdff0
This reverts commit eafc8c9c40.
tran_low_t/tran_high_t don't belong in a public header, they're private.
Similarly the public headers shouldn't rely on config defines,
vpx_config.h isn't installed.
Change-Id: I194ec273598da418df8dd727b6c0e78a556740ad
Some header file in vp9_idct.c has been included in vp9_idct.h.
This commit removes these redundant declarations.
Change-Id: I0238c27e4efff5c981eb437022c6bc6970c4e445
This commit fixes a compiling error in vp9_idct.h, where the codec
checks that the intermediate steps of transformation fit within
16-bit length. The issue was due to broken file dependency.
Change-Id: Ib22bba13a1e6df28489cb23d6774c561969f1fdc
When calculating delta in VP8 denoiser, since the block size is fixed to 16x16,
the divisor is 256, which is the number of the pixel.
But in VP9, the block size varies, the divisor should correspond to the block
size.
Change-Id: Ibdc1e5d23ba8c788b0d0dc6d406bcdfc34c1b142
One is a more aggressive version of the pruned subpel tree
search where only a single halfpel candidate is searched.
The search candidate is based on a surface fit result.
The other is a method to obtain the subpel position at one
shot based on the same surface fit.
The methods have not been deployed in any speed setting yet.
Change-Id: I34fef3f2e34f11396c9d1ba97f4be8c4ffca62d3
This commit enables the encoder to skip checking ALTREF inter modes
in ARF coding, if the predicted motion vectors suggest that the
GOLDEN_FRAME provides higher prediction accuracy than ALTREF_FRAME.
It improves the speed 3 encoding speed by about 5%, at the expense
of compression performance loss -0.041% and -0.225% for derf and
stdhd, respectively.
pedestrian_area 1080p 2000 kbps
66705 b/f, 40.909 dB, 118738 ms ->
66732 b/f, 40.908 dB, 113688 ms
old_town_cross 720p 1500 kbps
14427 b/f, 36.256 dB, 62746 ms ->
14412 b/f, 36.252 dB, 60690 ms
blue_sky 1080p 1500 kbps
51026 b/f, 35.897 dB, 73310 ms ->
50921 b/f, 35.893 dB, 70406 ms
bus CIF 1000 kbps
21301 b/f, 34.841 dB, 7326 ms ->
21248 b/f, 34.837 dB, 7196 ms
Change-Id: I76cf88b4d655e1ee3c0cb03c8a5745493040e8d2
This patch re-enabled the feature in Pengchong's patch
(commit 1286126073). Originally, it
was turned on while use_lastframe_partitioning > 0(not used anymore).
Now it was added as a feature, and turned on while speed >= 2.
As described in the original patch, this feature helps speed up the
slideshows in YouTube.
Change-Id: I1b0f18d65da1ee1c8d1e117dabba910c5207c471
iOS 5 support isn't available in the Xcode 6 install; iOS 6 covers
phones starting at the 3GS, so should be a reasonable base line
Change-Id: I15572ec0dd73f1ffc88c58120c706384a01f2478
The version of gcc4.6 included with the Android NDK through r10b
fails to compile this function. Replace it with C code.
BUG=860
Change-Id: Ifcc0476664071aec46a171cdd5ad17305930986a
A left shift of negative value causes IOC runtime warnings, this
commit converts two such left shifts to multiply to avoid IOCs.
Change-Id: I8811428768d7135e6e16af4b3094d0341589a995
The first comment is obselete given the way is now normative in VP9
bitstream. The second comment line was too long.
Change-Id: I6546585babf60d466485ddcf2daa6d2fa79e999a
As reported in issue #850, the condition for border extension was not
complete. This commit added the case when the scaling is enabled.
This fixes issue #850.
Change-Id: I67768b23f0dcc4ac9a9aa0a0825b0fe8cb85a72e
Simplified the code and removed some code that was not used anymore.
This patch didn't change encoding result.
Change-Id: I7e54a74c8f35a6726dfc8a1c55b337448b7ea124
The rd_thresholds are adaptively changed based on best mode tested.
It was only changed for the same block size, this commit makes the
adaptation for similar block sizes too. The commit also made minor
adjustment and code cleanups.
The impact on encoding time for _ped:
118089 ms -> 111927 ms
The impact on compression:
derf: -0.339%
stdhd: -0.303%
Change-Id: I8817fed1102350497f2ec631849e43f753878e5d
Adds code to return an integer cost list for NSTEP search. Then
uses it for pruned subpel search in speed 3.
derf: -0.06%
Speed on mobcal 720p increaes from 10.28 fps to 10.65 fps.
[Subject to further testing].
Change-Id: Ib591382d25b2c11bcaba9d3a27a93a9d1ab27a96
mi_grid_* are arrays of pointer to pointer. They save the pointers that point
to the MIs in cm->mi. But they are unnecessary and complicated. The original
goal was to remove MODE_INFO_t copy. But with an extra MODE_INFO_t pointer
inside MODE_INFO_t, same goal could be achieved.
This commit totally removes the mi_grid_* structures. But there are still
many dummy MODE_INFO_t inside cm->mi which are a waste of memory. Next commit
will do on-demand MODE_INFO_t allocation in order to save these memories.
Change-Id: I3a05cf1610679fed26e0b2eadd315a9ae91afdd6
Allow for option to apply spatial blur for temporal
denoising, under the aggressive denoising mode.
Change-Id: I41c5fdc0b6cf32d8f8d1d4236b25fa5aa406e89e
Place after pulling in forward declarations from the codec. This fixes
compilation of the tests under vs9.
Since
10783d4 Adds high bitdepth transform functions and tests
where vp9_idct.h was added to vp9_rtcd.h the tests are pulling in
vp9_systemdependent.h, which under visual studio include intrin.h. With
VS9 these include headers which define helper classes for intel
intrinsics. When including it in the tests (via vp9_rtcd.h) __cplusplus
is defined but vp9_rtcd.h would wrap declarations in 'extern "C" {'
causing a mismatch in linkage which resulted in compilation failure.
Change-Id: I475e50198b71320e8606bc95c9454876d8799ede
vpx_svc_parameters_t contains id, resolution and min/max qp for each spatial layer.
In this change we will use extra config to send min/max qp and scaling factors, then calculate layer resolution inside encoder.
Change-Id: Ib673303266605fe803c3b067284aae5f7a25514a
In many tests in VP8, the denoiser is disabled. By adding this
conditional comilation macro, the unit test will not be included
when denoiser is not enabled.
Change-Id: I6edec85c996acca22aacd11161c52408be2660a3
Substantial restructuring of the way we estimate
the rate of decay in prediction quality and determine
the arf interval and amount of boost used.
Also other changes to support moving to a lower first pass
Q which exposes some new features and allows us to better
distinguish genuinely static blocks from low motion or noisy
blocks.
Net gains now visible on all the test sets with std-hd PSNR up
1.87%. There are still some bad outlier cases but most of these
are low motion or slide show type content where the metrics
are already high at any given rate. The best + case is up by
more than 10%.
Change-Id: I18e25170053bdf3188f493ff8062f48a74515815
1. This is to align with the ffmpeg implementation
2. Remove APIs for setting quantizers and scale-factors
Change-Id: I6e238d71db790a9fb3254baaeb61e2a5aac58f48
This commit adds back sse2 or ssse3 optimized versio of a couple of
functions, fixes a ~10% performance regression.
Change-Id: I049786906e5a641224dced63c6492aec9d86d183
The ARF frame should always be the same size as the
native resolution of the input frames.
It will be scaled to the required resolution at
encode time.
Change-Id: I0afe858129aa6ef65b1648f43476331715346896
This commit makes the encoder to use non-zero mode threshold for
NEARESTMV modes. The runtime for test clips of speed 3 is reduced
by about 1%.
pedestrian 1080p 2000 kbps, 143239 ms -> 141989 ms
bus CIF 1000 kbps, 7835 ms -> 7749 ms
The compression performance change is about -0.02% for both derf
and stdhd.
Change-Id: Ib71808922c41ae2997100cb7c561f68dcebfa08e
If the partition block is skippable, which means no coefficients
for Y, U, and V planes, its skip flag is set to 1. No quality
change (verified by borg tests), and no noticeable speed change.
Change-Id: I9231f720f8dd6364384cf05aa148ca24d75450f1
Libvpx was memseting every external frame buffer before decode. This
was to work around a valgrind issue in our C loop filter. Most of
the time this was not needed and we have noticed some significant
performance loss on some platforms. Now we require the application to
zero out the buffers if it is using external frame buffers.
Change-Id: I7330d00a315e65137ed30edd5f813e8929b76242
This commit enforces ARF validation check for compound inter modes.
It avoids potential access to ARF in the encoding process if it
is not allowed.
Change-Id: I055fec946b5d19d97937dc9001e1e564923e2439
The valid reference frame check in sub8x8 rate-distortion
optimization search has been included in the ref_frame_skip_mask
scheme. This commit removes the later further validation checks
that are not in effect.
Change-Id: I853b477c44037d3dc0afec6cbfce08a96c597a75
This commit replaces the best_ref_index table fetch with the use
of best_mbmode in vp9_rd_pick_inter_mode_sub8x8.
Change-Id: I882ee9ee6a8c0e61befcca1f4dba6d2ea8de8f13
The issue was discovered on bitstream with 2x vertical downscale. For
zero MVs, y_pad is set to 1 only when vertical convolution is
required. The original code assumes that for y_step_q4 == 32 we don't
perform vertical convolution. But vp9_setup_scale_factors_for_frame()
sets convolve functions so that when x_step and y_step are both not
equal to 16, convolve in both directions is performed. And convolve()
unconditionally subtracts one stride from source pointer when calls
convolve_horiz(). This leads to invalid memory access.
Change-Id: I882dfa6081a58e172b5ffa55842bfcd6727f10bf
Call to vp9_rc_get_second_pass_params() moved from
Pass2Encode() to earlier in vp9_get_compressed_data(),
to ensure that two pass stats and parameters are
available before decisions such as frame scaling.
Change-Id: If21537f0073919b04696a7d5e9aac78e23d76f39
When a reference frame type is not in the frame buffer, the mode
search threshold will be set to INT_MAX, so as to effectively
turn off the mode entries in the rate-distortion optimization loop
that involves this reference frame type. This operation is now
integrated in the ref_frame_skip_mask scheme. This commit hence
removes the redundant mode search threshold setting.
Change-Id: Ib18f45da611afda2af275201efd367df7f5101ab
This commit unifies the reference frame control in the rate-
distortion optimization search loop of sub8x8 block size to remove
the control dependency on mode search order.
Change-Id: I3a174099f71a7cc176ede9fd60e2374243ae9232
Improves function to return sad of integer pels by reusing integer
pels already visited in the smallest scale.
Turns on BIGDIA search for speed 4. Also, turns on the
first version of the pruned subpel search at this speed.
derf: -0.32% (speed 4)
Speed seems to improve by at least 5% but subject to verification.
Change-Id: Iaec8eaffd61d6237ac029e6a2a1b0a88b2a35271
Adds various high bitdepth transform functions and tests.
Much of the changes are related to using typedefs tran_low_t
and tran_high_t for the final transform cofficients and intermediate
stages of the transform computation respectively rather than fixed
types int16_t/int. When vp9_highbitdepth configure flag is off,
these map tp int16_t/int32_t, but when the flag is on, they map
to int32_t/int64_t to make space for needed extra precision.
Change-Id: I3c56de79e15b904d6f655b62ffae170729befdd8
The variable best_inter_rd is effectively not in use in the rate-
distortion mode search loops of both regular block sizes and sub8x8
block sizes.
Change-Id: I178f909f8c9629772e13adc6257908653b2adf31
The speed feature that skips compound inter prediction modes was
subsumed by other speed features and effectively was not in use.
This commit removes it.
Change-Id: I22b0c71a8ddd15d93b25d86fa63a1dce2ba6a1a9
If optimizations use more than one cpu feature, allow
specifying them so that '--disable-X' still works
https://code.google.com/p/webm/issues/detail?id=854
Change-Id: I3108ea37b397371a2be84dd5f2380b304db23f18
1. svc_encodeframe.c will not handle frame or stats packets anymore.
The app will process them.
2. Remove APIs that related to these packets.
Change-Id: Id0d7f8b458dc09c6f77064c0878fd4e572db001b
Integrate intra mode mask speed feature with the mode_skip_mask
scheme. Move it outside the mode search loop in the
vp9_rd_pick_inter_mode_sb function.
Change-Id: I7738fea749bfdc08ad05d7f2524feb8ff67568d9
This speed feature is used in real-time setting only. Remove the
related condition check in the rate-distortion optimization search
loop.
Change-Id: Iaacc1e268214634e6f95c5048c28a60cec6c42fc
Refactor overlay frame speed-up related function. Make it unified
with the ref_frame_skip_mask system and Move it out of the mode
search loop.
Change-Id: I0dde9baf44354f6ba00b4679cba02fa6a30c7316
This commit refactor the rate-distortion optimization search for
regular block sizes to remove the speed feature dependency on mode
search order.
Change-Id: Ied033ee484c2957e17baa7b6450b720fe7dd0e7d
This issue is found when the denoising mode is set to kDenoiserOnYUVAggressive.
Updated the C code to make it the same with SSE version.
I also changed several lines in VP9 denoiser for the code style.
Change-Id: I640d48cf946fe8c6a400e6e252107501d1e226d3
This speeds up the encode significantly. Also added a comment about using
best quality to keep new developers informed.
Change-Id: I04e8154d4b2c4cae07fe7cc9a71e707f649e9ed4
don't bother decoding any further after receiving an earlier decode
error until a key/intra-only frame is encountered.
Change-Id: I381917b70d7a9e6f8d6de42e3d181bb113a4cec4
This commit fixes a bug related to skipping intra mode checking, by
using a separate variable to store the best prediction error from
inter mode. It avoids unintentionally overwriting intra mode
rate-distortion cost, and hence affecting other speed features.
Change-Id: I99e12993339c84c8b4f597996b372012e5858fae
Assigning selected reference frame pointer is done in the
encode_superblock function. No need to do this at the end of
rate-distortion optimization search.
Change-Id: I33fcede0fd304b4a4c4deef2d126d79546a9c070
This commit refactors the vp9_rd_pick_inter_mode_sb function to
remove the intra mode early termination dependency on the mode
search order.
Change-Id: If6ac49aa7c530c7b9a5bd31b0ab84db83e192bec
This commit allows the encoder to find current best prediction mode
state using best_mbmode, instead of fetching from the static mode
search table via best_mode_index.
Change-Id: Ibefeab83aed33a49c2be03e83f09153856ca4271
Allow building for targets which have NEON but not EDSP or MEDIA.
Set HAS_NEON flag for builds which have neon assembly but not
intrinsics.
Change-Id: Ibfa81a8444a8c55d1d3209c533d1d70d2f809669
The use of use_lastframe_partitioning is totally removed in good-
quality encoding. Its usage in real-time encoding needs to be
evaluated to see if it can be removed too.
The Borg tests at speed 4 showed:
stdhd set: 0.220% psnr gain, 0.166% ssim gain;
derf set: 0.329% psnr gain, 0.476% ssim gain.
Speed test on selected clips showed 1.54% speedup.(Worst case:
pedestrian_area_1080p25.y4m, speed loss: 1.5%)
Change-Id: I1c844d329b0b5678558439b887297c1be7ddab00
the code currently checks whether the allocation has been done instead
of allocating on the first frame.
since:
4f27202 vp9: fix crash in mt loopfilter w/corrupt file
this change defers the allocation until the loop filter is used.
Change-Id: I660c1b7f34e713a8dd9884483f01d23b9847366e
The speedup in rd_pick_partition() function makes it possible
to drop use_lastframe_partitioning feature. By doing that, we
achieve good PSNR gain with small speed loss. Also, this makes
encoding loop less complicated. The code cleanup patch will
follow.
Borg tests showed:
1. At speed 2,
stdhd set: 0.201% PSNR gain, 0.133% SSIM gain;
derf set: 0.262% PSNR gain, 0.276% SSIM gain.
2. At speed 3,
stdhd set: 0.139% PSNR gain, 0.109% SSIM gain;
derf set: 0.447% PSNR gain, 0.442% SSIM gain.
The average speed loss over selected test clips is within 1%
with the worst case of 4%.
Change-Id: Icfd2ded7869372b585a6972855d933b3d0280d90
The rate costs calculated for inter modes are not precise in some
cases, which causes NEWMV is chosen instead of NEARESTMV, NEARMV,
and ZEROMV. This patch added checks for these cases, and corrected
the mode decisions.
Borg tests at speed 3 showed:
1. stdhd set: 0.102% PSNR gain and 0.088% SSIM gain.
2. derf set: 0.147% PSNR gain and 0.132% SSIM gain.
No speed change.
Change-Id: I35d17684b89ad4734fb610942d707899146426db
Removed functions:
* vp9_post_proc_down_and_across_mmx
* vp9_mbpost_proc_down_mmx
* vp9_plane_add_noise_mmx
They all have sse2 equivalent.
Change-Id: I59c1fac12b7c96ca4538d455e4400c2b7875feff
vp9_variance_sse2.c contains a mix of intrinsics and references to
assembly which uses x86inc.asm; it's conditionally included as a result.
Change-Id: I254451483a65881c0b8e18e27bf0c3ddef60c4ec
make bifilter4_coeff[][] uint8_t, no values exceed this range and
they're loaded with vdup_n_u8().
Change-Id: I921983e9edd828d29820e40ac30a7801dbe0fb4f
allocations within vp9_alloc_context_buffers() rely on mi_rows/mi_cols
individually, use those to determine whether to realloc rather than
stride and stride * rows. this fixes a crash with some fuzzed files for
invalid accesses into last_frame_seg_map and above_context.
Change-Id: I7b9f40dcf170d443890f3bd2acd285507943c7d4
proceeding using a corrupt (incompletely decoded) frame reference may
lead to incorrect assumptions about allocation sizes leading to a crash.
Change-Id: I76e74f2e1be127c2e2c7e1174bb3307497dfd23d
This commit turns on adaptive motion search for ARF coding, in
addition to other normal inter frame coding. It improves the
average compression efficiency:
stdhd 0.1%
derf 0.04%
For the test sequences, the speed 3 runtime is reduced:
pedestrian 1080p 2000 kbps, 149932 ms -> 144580 ms, (3.3% speed-up)
bus CIF 1000 kbps, 8050 ms -> 7895 ms, (1.9%)
highway CIF 100 bkps, 45033 ms -> 44078 ms, (2.2%)
Change-Id: I5228565b609f99e8ae04f6140a2bf2b64a831d21
This is to keep the same with VP8 denoiser.
If motion magnitude is small,
make denoiser more aggressive.
Change-Id: I942a6e2f2ed9aec6f0c4c1f9e5fa47066cadcc0c
Calling Reset(int) method instead of overloaded operator()(int).
Adding underscore at the end of class member name.
Change-Id: I01934e7bc056d4b594e5d05d693328febd34ac3c
When the first try of denoising turns out to be too much,
we will use a softer filter by adopting an adjustment to
make the result closer to original pixel (as in VP8 denoiser).
The old code made the adjustment in the wrong direction.
Change-Id: I84e28fa9e01eef47c5a37d5a2e6d3d378a06786b
Use the right return values - vget_low_s64 returns int64x1_t, not
a normal int64_t.
Also make __builtin_prefetch a no-op on MSVC for this file.
Change-Id: I4d2fce01d0ba106b98d3d53b137803119c2c2c08
This commit allows the encoder to store outcomes of single reference
frame modes and compares them to decide if the inter prediction
filter, forward transform, and quantization can be skipped.
The compression performance of speed 3 is down
derf -0.364%
stdhd -0.198%
For test sequences, the speed 3 runtime is reduced
highway CIF 100 kbps, 51976 ms -> 45033 ms, 13% speed-up
stockholm 720p 1000 kbps, 71826 ms -> 67838 ms, 5.5% speed-up
pedestrian 1080p 2000 kbps, 154924 ms -> 150702 ms, 2.6% speed-up
Change-Id: I5aa26f918d2b4b5197a2c0afa2779319f1c88e44
vp8_build_intra_predictors_mbuv_s().
This patch replaces the assembly version with an intrinsic
version.
On a Nexus 7, vpxenc (in realtime mode, speed -12)
reported a performance improvement of ~2.6%.
Change-Id: I9ef65bad929450c0215253fdae1c16c8b4a8f26f
intra_super_block_yrd() and inter_super_block_yrd() are largely same,
this commit merges them into one to reduce code duplication.
Change-Id: I64d7042a5b099345627cf55663010c185b25ec37
From 3 to 2, which seems to be slightly positive on compression for
all test sets, also reduces encoding time by 2%-5%, varying on the
test clips.
Change-Id: If045417bd27311700c919b4a335eff0dc1130ae0
This commit removes the special case for key frame, as transform size
decision is controlled by the appropriate speed feature for all lossy
coding modes: tx_size_search_method.
Change-Id: I9677171e3f2432ec23705f7c5ea8170dd4562fae
This commit allows the encoder to skip check on compound inter
modes in the rate-distortion optimization loop, if the reference
frame bias signs are the same.
Change-Id: Ib753e6bb11cbdd338aee69dbe2b649671f75a6b0
Adds config parameter vp9_highbitdepth, to support highbitdepth profiles.
Also includes most vpx level high bit-depth functions. However
encode/decode in the highbitdepth profiles will not work until
the rest of the code is in place.
Change-Id: I34c53b253c38873611057a6cbc89a1361b8985a6
It's built based on current spatial svc code.
We only support one spatial two temporal layers at this time.
Change-Id: I1fdc8584354b910331e626bfae60473b3b701ba1
This commit skips the compound inter mode prediction check in the
rate-distortion optimization loop for ARF coding. It reduces the
runtime for certain test clips at speed 3, at no compression
performance change:
bus CIF 1000 kbps, 8260 ms -> 8090 ms, 1.8% speed-up
stockholm 720p 1000 kbps, 74453 ms -> 71826 ms, 2.9% speed-up
No visible speed-up for pedestrian area 1080p at 2000 kbps.
Change-Id: Ic68aa56837159b726563b784e2e3729e846465ad
Use unsigned int type to store the sse in the pixel domain. The
precision is sufficient to handle sse of block size up to 64x64.
The transform domain version however needs int64_t, since there is
a transfer gain applied in the forward transformation that might
cause unsigned int overflow.
Change-Id: Ifef97c38597e426262290f35341fbb093cf0a079
store the number of allocated rows in VP9LfSync, the calculated values
can not be relied on when dealing with corrupt material.
Change-Id: I13b8bcec9738c299a71df726772ab7ac05511e5b
This commit allows encoder to skip intra coding mode test, when
the known inter residual is less than the source variance. It
reduces the runtime of speed 3 for test clips:
bus cif 1000 kbps: 8587 ms -> 8260 ms, 3.8% speed-up
pedestrian 1080p 2000 kbps: 161381 ms -> 155241 ms, 3.7% speed-up.
The compression performance is down by
derf -0.36%
stdhd -0.25%
Change-Id: I75ce1e035b4da2153cb1ac14111d1a07c05a735d
This commit extends the sse and forward transform computation flag
to support the case 64x64 blocks where there are 4 32x32 2D-DCT
blocks.
Change-Id: I86a3e805dfaa0f3abd812f590520c71aa0e40473
In order to understand memory layout consider the declaration of the
following structs. The first one is a part of our API:
struct vpx_codec_ctx {
// ...
struct vpx_codec_priv *priv;
};
The second one is defined in vpx_codec_internal.h:
struct vpx_codec_priv {
// ...
};
The following struct is defined 4 times for encoder/decoder VP8/VP9:
struct vpx_codec_alg_priv {
struct vpx_codec_priv base;
// ...
};
Private data allocation for the given ctx:
struct vpx_codec_ctx *ctx = <get>
struct vpx_codec_alg_priv *alg_priv = <allocate>
ctx->priv = (struct vpx_codec_priv *)alg_priv;
The cast works because vpx_codec_alg_priv has a
vpx_codec_priv instance as a first member 'base'.
Change-Id: I10d1afc8c9a7dfda50baade8c7b0296678bdb0d0
In the partition search, the encoder checks all possible
partitionings in the superblock's partition search tree.
This patch proposed a set of criteria for partition search
early termination, which effectively decided whether or
not to terminate the search in current branch based on the
"skippable" result of the quantized transform coefficients.
The "skippable" information was gathered during the
partition mode search, and no overhead calculations were
introduced.
This patch gives significant encoding speed gains without
sacrificing the quality.
Borg test results:
1. At speed 1,
stdhd set: psnr: +0.074%, ssim: +0.093%;
derf set: psnr: -0.024%, ssim: +0.011%;
2. At speed 2,
stdhd set: psnr: +0.033%, ssim: +0.100%;
derf set: psnr: -0.062%, ssim: +0.003%;
3. At speed 3,
stdhd set: psnr: +0.060%, ssim: +0.190%;
derf set: psnr: -0.064%, ssim: -0.002%;
4. At speed 4,
stdhd set: psnr: +0.070%, ssim: +0.143%;
derf set: psnr: -0.104%, ssim: +0.039%;
The speedup ranges from several percent to 60+%.
speed1 speed2 speed3 speed4
(1080p, 100f):
old_town_cross: 48.2% 23.9% 20.8% 16.5%
park_joy: 11.4% 17.8% 29.4% 18.2%
pedestrian_area: 10.7% 4.0% 4.2% 2.4%
(720p, 200f):
mobcal: 68.1% 36.3% 34.4% 17.7%
parkrun: 15.8% 24.2% 37.1% 16.8%
shields: 45.1% 32.8% 30.1% 9.6%
(cif, 300f)
bus: 3.7% 10.4% 14.0% 7.9%
deadline: 13.6% 14.8% 12.6% 10.9%
mobile: 5.3% 11.5% 14.7% 10.7%
Change-Id: I246c38fb952ad762ce5e365711235b605f470a66
Updates the vp9_pattern_search function to return integer one-away
neighbors' sad values, for subsequent use in speeding up the
sub-pel search. Also, removes code for the do_refine option
which is not being used currently.
Updates the integer and subpel functions to pass in a 5-element
sad list for output or input.
A new pruned sub-pel search algorithm is implemented that uses
the sad returned from the integer pel search. But it is not
deployed yet.
Change-Id: Ifa9f5ad024b5b660570366d2bd900343e1891520
this change is proactive: the loop filter expects valid input and may
produce undefined results / crash in other cases.
Change-Id: I6cc1e966062a91cbc6db981c87cd03d9129fc8fe
attempting to decode a frame after the previous frame failed has the
potential of interrupting an earlier loop filter task
Change-Id: I6f2b1ddcdf5b89c3e2ee8caf5289dada2a087d66
This commit re-work the operation flow related to prediction
residual generation and the rate-distortion modeling. It saves one
call for model_rd_for_sb.
Change-Id: Icaf96c0ff09c903637ed5283448afe01d798195f
The value of switchable rate has been stored in a local variable.
This change skips the second call to vp9_get_switchable_rate() by
reusing the local variable.
Change-Id: Ib7d3fef7621cc4bde94c6d6e6b3a71f1fd4559f2
Check the mode and motion vector cost. If it is already above
the existing best rate-distortion cost, skip the rest check process
on this mode.
Change-Id: Ie065cebdfda2a3be3be18b8e8b43dc29aaa8c179
This commit makes the rate distortion modeling run in the unit of
maximum transform block size. No compression/speed change observed.
It is for the use of later fast forward transform purpose.
Change-Id: Ibaaedb69c765e8d0c5d5012f0ec07f36fd9f68fd
if the first frame was corrupt and loop filter not called, the next call
would assume the necessary allocations had been done and segfault when
accessing a NULL pointer
Change-Id: Ib6ef505e5c594e6f0fe65ab0700172bcf06b92a6
This commit addes a new strategy to reduce the search for optimal
interpolation filter type. The encoder counts and store how many each
filter type is selected and used for each of the reference frames.
A filter type that is rarely used for all three reference frames is
masked out to avoid computation.
The impact on compression is neglectible:
-0.02% on derf
+0.02% on stdhd
Encoding time is seen to reduce by 2~3%.
Change-Id: Ibafa92291b51185de40da513716222db4b230383
We can use one frame context for each layer so that we don't have
to reset the probs every frame. But we can't use prev_mi since we
may drop enhancement layers. So we have to generate a non vp9
compatible bitstream and modify it in the player.
1. We need to code all frames as invisible frame to let prev_mi
not to be used. But in the bitstream we need to code the
show_frame flag to 1 so that the publisher will know it's
supposed to be a visible frame.
2. In the player we need to change the show_frame flag to 0 for
all frames. Then add an one byte frame into the super frame
to tell the decoder which layer we want to show.
Change-Id: I75b7304cf31f0ab952f043e33c034495e88f01f3
the parsing of this flag was mistakenly put in a CONFIG_VP8_DECODER
conditional block in:
95853db vpxdec: add --keep-going option
Change-Id: Ie83ca0399fd3f3d4b0a9d03b7ca5536b310e1f02
The function was called in two places. In the first case it is replaced
with vp9_set_speed_features() call. In the second case the body of set_speed_features() is inlined.
Change-Id: If3fdf1b4168eee97677c224f69c245fe46c7f606
This patch fixes slow first pass problem. Mode could only be determined
from the deadline value during frame encode call. Unfortunately, we use
mode value before any encode calls during the first pass encoding (see
set_speed_features() logic). The mode for the first pass must be different
from BEST to make first pass fast.
Change-Id: I562a7d32004ff631695d91c09a44d8a9076fd6b5
use win32/win64 instead of $(PlatformName) (Win32/x64) for compatibility
with yasm 1.3.0. both format types were available since at least 0.8.0
BUG=843
Change-Id: I7917620490d0663b118ff08b96d1e5dbccba3703
Change-Id: Ia55317606c78a9d984db0321ef142548d20b64bc
1: dereference of global->codec checked
2: warning fails to recognize fatal(xxx) as exit or return
3: ctrl_args_map can be null
4: streams can be null
The case where frame width increases but the overall memory
size required to hold the mi arrays does not was not
handled.
Change-Id: I72e70b912a7d1766687ad682979f1c9ee124449b
My fault, that was a float (not integer) which was converted to int64_t.
This reverts commit a885e1cbf0
Change-Id: Ic50708b959e1c3cb3e37da1429d334fafc3391d6
Scale min_consec_zero_last wrt to #temporal layers,
and use full framerate as factor in noise metric.
Change-Id: Id0842b90164ce468d1236173c51965e7620c0e12
In the full-rd transform size search, we go through all transform
sizes to choose the one with best rd score. In this patch, an
early termination is added to stop the search once we see that the
smaller size won't give better rd score than the larger size. Also,
the search starts from largest transform size, then goes down to
smallest size.
A speed feature tx_size_search_breakout is added, which is turned off
at speed 0, and on for other speeds. The transform size search is
turned on at speed 1.
Borg test results:
1. At speed 1,
derf set: psnr gain: 0.618%, ssim gain: 0.377%;
stdhd set: psnr gain: 0.594%, ssim gain: 0.162%;
No noticeable speed change.
3. At speed 2,
derf set: psnr loss: 0.157%, ssim loss: 0.175%;
stdhd set: psnr loss: 0.090%, ssim loss: 0.101%;
speed gain: ~4%.
Change-Id: I22535cd2017b5e54f2a62bb6a38231aea4268b3f
This commit enables the encoder to record the location of the
center frame to generate alter reference frame. It then allows to
skip checking prediction modes of other reference frame types when
it comes to encode this frame.
The speed 3 runtime is reduced for the test sequences:
bus at CIF 1000 kbps, 9791 ms -> 9446 ms, i.e., 3.5% speed-up,
pedestrian at 1080p 2000 kbps, 184043 ms -> 175730 ms, i.e., 4.5%
speed-up.
No compression performance change observed.
Change-Id: Iacfde3bcc1445964e7a241f239bd6ea11cb94bd1
1. Clean the code for encode frame tests
2. Add encode w/ and w/o alt reference frame test
3. Add encode SNR layers test
4. Add encode multiple layers but decode partial layers test
Change-Id: Ibd2c9bc02525db584a6f931a98405f2d851b3cd6
There are two CreateDecoder functions and decode_test_driver is not
calling the right function now. This bug is discovered during really
enable the frame parallel flag inside libvpx. This bug does not affect
any existing unit test though.
Change-Id: Icd9633c4b66d50e422a09c4310ff791082878936
This reverts commit 5509b7fd8f
Observed a big drop in compression quality and speed for speed 1 for a 360p test clip, revert this now for investigation.
Change-Id: If69dc8d77a225b34dc7907a9472e1a7a0a22762d
According to the current API spec we need to call vpx_codec_encode() until
vpx_codec_get_cx_data() returns NULL.
Change-Id: I4617f8042d50480a8f47b0b7114d4759fa566b14
Add a speed feature to give the tighter partition search
range. Before partition search, calculate the histogram
of the partition sizes of the left, above and previous
co-located blocks of the current block. If the variance of
observed partition sizes is small enough, adjust the search
range around the mean partition size, which will be tigher.
The feature is currently turned on at speed 2. Experiments on
sample youtube clips show on average the runtime is reduced
by 3-7%.
For hard stdhd clips:
park_joy_1080p @ 15000kbps: 509251 ms -> 491953 ms (3.3%)
pedestrian_area_1080p @ 2000kbps: 223941 ms -> 214226 ms (4.3%)
The PSNR performance is changed:
derf: -0.112%
yt: -0.099%
hd: -0.090%
stdhd:-0.102%
Change-Id: Ie205ec5325bf92ec5676c243e30ba9d0adca10f2
- Fix nit: make test function definitions match test order.
- Fix nit: use elog instead of echo for env verification error.
Change-Id: I0eec078fc056a5bb2bd88d5833e43de48d77ec08
When configuring the buffer make sure to set all the (now) required
fields. Use the canonical variables and match the style from vpx_scale.
https://code.google.com/p/webm/issues/detail?id=841
Change-Id: I71b43d4a03756b8b2d6d60fdf8d7bf41b8041787
this test allocates >2GB currently. depending on the order of the test
runs the allocation may fail most regularly with mingw+wine.
Change-Id: Ibee1c18cfbe29a4de6c65075647ec3955d8206c0
- Remove vpxdec and vpxenc from the exclude list.
- vpx{dec,enc}.sh: Updates to support finding their executable when
LIBVPX_BIN_PATH is setup for the examples.
- tools_common.sh: New library function, vpx_tool_path(). Provides
support for finding the exectuables in vpx{dec,enc}.sh.
Change-Id: I730f11cceb44646491a7a7ff58603a4a760129ef
According to the current API spec we need to call vpx_codec_encode() until
vpx_codec_get_cx_data() returns NULL.
Change-Id: Ide0c531dc0d453df8ec1edb8acb894856d6cc22e
Explicitly makes the fileptr null when close source is called
on a temporary file. This avoids a valgrind error.
Change-Id: I9c364290eeb6842fde946dd9bf817814c7178aaa
On key frame, will always start with normal denoising mode,
but based on a computed noise metric (normalized mse on source diff)
may switch to aggressive mode (and back down again).
Change-Id: I20330b2dcf3056287be37223302b2cab5fc103eb
Modify zero_mv bias condition to include check that "closest" reference is last_frame.
This is needed for temporal layers, where the last_frame is not always the closest reference.
Also, constain zeromv_count to be for last_frame reference.
Change-Id: I7af54a809ebf01ef43b9933c9d4095b6cb189390
Make sure VP9 frame-parallel decode passes all the standard
test vectors. Only test running with 2,3,4 threads now.
Also refactor the video decode test driver to support passing
in decode flags which is used to enable frame-parallel decode.
Change-Id: I6a712464232c2e13681634951c7e176312522e1e
In the current implementation of the encoder,
frame buffers may come from the wider set of
12 such buffers, and is not restricted to the
8 allowed as reference frames. This is only
an implementation detail and does not affect
the constraint of having a total of 8 reference
buffers overall.
Change-Id: I075f777146c2df49c275d89232933f8127235175
At --good and speed 3 or above for resolution less than 720p. This
disables the tests for 64x64 intra prediction modes. Encoding time
reduction is about 1%.
Change-Id: Ib396e3d1417fece416e3f0fee929b128acbb130f
The test to determine if the mode info buffers need
to be resized when the frame size changes was
incorrect, as per bug 837.
By storing the size of the allocated data structure,
a simple test determines whether to allocate more
memory when the frame size changes.
Change-Id: I1544698f2882cf958fc672485614f2f46e9719bd
In the encoder, current_video_frame is used in a couple of places to
decide encoding strategy, this commit replaces with more appropriate
variables.
Change-Id: I3d3d8d8e2ea02c489e4639b9d4c446a63e357d29
This commit moves the simplified coefficient probability model
and costing update to speed 4, and turns on chessboard pattern
mode search for sub 720p sequences. The overall coding performance
of speed 3 is improved:
derf 0.889%
stdhd 1.744%
The speed 3 runtime for test sequences are improved:
bus cif at 1000 kbps 9823 ms -> 9642 ms
pedestrian 1080p 2000 kbps 189559 ms -> 183284 ms
Change-Id: Iecbc7496a68f31fd49fb09f8dfd97c028d675a5d
This commit enables the encoder to skip NEARMV and ZEROMV if the
above and left blocks have identical reference frame, and the
current reference is different from that. It reduces the runtime
of speed 3 for test sequences:
bus cif at 1000 kbps 10064 ms -> 9823 ms
pedestrian 1080p at 2000 kbps 193078 ms -> 189559 ms
The compression performance is changed by
derf -0.085%
stdhd -0.103%
Change-Id: If304f26d42e6412152a84c3dd7b02635c38444f4
This commit allows the encoder to check the above and left neighbor
blocks' reference frames and motion vectors. If they are all
consistent, skip checking the NEARMV and ZEROMV modes. This is
enabled in speed 3. The coding performance is improved:
pedestrian area 1080p at 2000 kbps,
from 74773 b/f, 41.101 dB, 198064 ms
to 74795 b/f, 41.099 dB, 193078 ms
park joy 1080p at 15000 kbps,
from 290727 b/f, 30.640 dB, 609113 ms
to 290558 b/f, 30.630 dB, 592815 ms
Overall compression performance of speed 3 is changed
derf -0.171%
stdhd -0.168%
Change-Id: I8d47dd543a5f90d7a1c583f74035b926b6704b95
The function is called only once, right after all stats counters are
reset to 0. Therefore all the computations have zero effect on return
values. This commmit to removed those effectless code.
Change-Id: I50d27c0802547921fa36c60aa4bd92d76247f595
check that bitrates increase with cqlevel at global test case teardown,
rather than after each individual test case. this allows the tests to be
run out of order with --gtest_shuffle.
Change-Id: I9e0d4e6a2d920a1f2fe9aee7b7876a3e7eb5d297
Reinstates an assignment to prevent an asan failurere on google3.
Not sure why the failure happens. This was removed in a recent patch
https://gerrit.chromium.org/gerrit/#/c/71068/.
Change-Id: Ifd9ccffd4c2164f4de38b21821ffb28bd779b0f3
'ref_frame_map' is initialized to -1. avoids using an invalid index if
VP9_GET_REFERENCE/VP8_COPY_REFERENCE controls are issued after a decode
error.
Change-Id: I4599762c4d0b07a5943a72bf4a86ccb596cc062a
if the decode of the first frame fails, frame_to_show may not be set.
fixes a crash in vpxdec with corrupt data.
Change-Id: I5ab9476d005778a13fd42a39d05876bb6c90a93c
At speed 6 the smallest partitioning was 16x16 and biggest
intra block was 8x8, essentially disallowing all intra blocks
which produces ugly artifacts when revealing new video.
Change-Id: I364042d4c64e09be0666ade64aac94d0a1b586cf
Reverts to using tmpfile() for non-Windows platforms. On google3
the test directory does not have write permissions, and hence the
Y4mWriteTest fails. This patch fixes the issue.
On Windows, a temporary file is created in the temp directory
that has write permissions.
The tests pass on linux, mingw, and MS visual studio.
Change-Id: Ibada1d80e25d8b8e5b6a9d3d597533674bd9024c
the bulk of the functionality was removed in:
a42b5c2 Removing legacy XMA features from libvpx.
BUG=840
Change-Id: I8ca51d6aa76028f36d0eb1a15d2f2e3161e12ea4
simple_encoder: Flush encoder. According to the current API spec we need
to call vpx_codec_encode() until vpx_codec_get_cx_data() returns NULL.
Change-Id: Ibc37706e5257a3d51e5421ca17f77ab41249d9b5
When a valid data pointer is given make sure the size is greater than
zero.
A previous check for vp9 was incorrectly removed in:
7050074 Make the api behavior conform to api spec.
No semantics for valid pointers + 0-sized frames are defined for VPx
codecs, so move the check to vpx_codec_decode(). This avoids an assert
in vp9.
+ add some basic invalid param testing for decoder init/decode/destroy
Change-Id: I99f9cef6076d15874fd72ac973f2685d8a2353c3
This commit enables encoder to select fast forward transform and
quantization path according to the prediction residual sse/variance,
in the rate-distortion optimization scheme.
Change-Id: Ief9fc3844fd4107166d401970e800c6e5ce2b5fe
- Split vpxenc() into vpxenc() and vpxenc_pipe().
- Drop all but one positional param (the input file) in favor
of passing args directly to vpxenc.
- Add an extra lossless test that explicitly sets min-q and
max-q to 0.
Change-Id: I7d5f7b495f8b9447388c5f459bc9f6de2214caf2
We had a very complicated way to initialize cpi->pass from
cfg->g_pass:
switch (cfg->g_pass) {
case VPX_RC_ONE_PASS:
oxcf->mode = ONE_PASS_GOOD;
break;
case VPX_RC_FIRST_PASS:
oxcf->mode = TWO_PASS_FIRST;
break;
case VPX_RC_LAST_PASS:
oxcf->mode = TWO_PASS_SECOND_BEST;
break;
}
cpi->pass = get_pass(oxcf->mode).
Now pass is moved to VP9EncoderConfig and initialization is simple:
switch (cfg->g_pass) {
case VPX_RC_ONE_PASS:
oxcf->pass = 0;
break;
case VPX_RC_FIRST_PASS:
oxcf->pass = 1;
break;
case VPX_RC_LAST_PASS:
oxcf->pass = 2;
break;
}
Change-Id: I8f582203a4575f5e39b071598484a8ad2b72e0d9
Eliminated instructions by using better neon instructions
and rearranging the loop.
On a Nexus 7, vpxenc (in realtime mode, speed -12)
reported a performance improvement of ~1.0%.
Change-Id: I6b1700e79318f647ea67ef25e954c308932950ec
Replaced encoder and decoder functions to get a pointer
to a reference frame with a common function, vp9_get_ref_frame,
and simplified it.
Change-Id: Icb206fcce8caace3bfd1db3dbfa318dde79043ee
in the sub_pixel_*variance* function the dst is aligned to 16 bytes and not
to 32 bytes - now load unaligned data
Change-Id: I2e0b9745543697efc56fefa32857ea10117af135
Fix the interaction between active map and reuse_inter_pred_sby. The
reuse_inter_pred_sby feature expects inter predictors to already be
built, but blocks with active map on skip this step.
Change-Id: Ibb2bf0d228f678935d82a0ede9cb0919ab7c8878
A bug in Microsoft compiler was found in the function
vp9_filter_block1d16_v8_avx2 and a workaround applied.
the bug occur when there was 4 consecutive maddubs + min + adds
intrinsic instructions.
Change-Id: I83499faeb70971e650e5663fd2490360ddb1a51b
in the function sad32x32x4d and sad64x64x4d the source is aligned to 16 bytes
and not to 32 bytes - the load is now unaligned.
Change-Id: I922fdba56d0936b5cf72e4503519f185645a168c
Specifies the bit-depth, color sampling and colorspace
for intra only frames for profiles > 0
Also adds checks to ensure that profile 1 and 3 are
exclusively used for non 420 streams.
Change-Id: Icfb15fa1acccbce8f757c78fa8a2f60591360745
This commit adds a configure time option used to enable strict error
checking in decoder to make sure intermediate stage cofficients of
inverse transforms are within valid range of signed 16 bit integer.
For valid VP9 input streams, intermediate stage coefficients should
always stay within the range of a signed 16 bit integer. Coefficients
can go out of this range for invalid/corrupt VP9 streams. However,
strictly checking this range for every intermediate coefficient can
be a burden for decoder, therefore such validation is only enabled
with configure option --enable-coefficient-range-checking.
Change-Id: I47d47c8c4e48a922c3d223ca59064f51b3f0f5ed
This commit integrates the fast transform and quantization process
into skip_recode scheme in the rate-distortion optimization loop.
Previously the fast transform and quantization process was only
enabled for non-RD coding flow.
Change-Id: Ib7db4d39b7033f1495c75897271f769799198ba8
This is needed to update the width/height and stride parameters
for the reference buffers that the denoiser uses.
Change-Id: Id51b3bdcb56bbbc8187865544ccd3d872a0d51fe
When no more data is available, vpx_codec_decode should
be called with NULL as data and 0 as data_sz.
vpx_codec_get_frame iterates over a list of the frames
available for display. The iterator storage should be initialized
to NULL to start the iteration. Iteration is complete when this
function returns NULL.
Also change the unit test to conform to the api spec.
Change-Id: I4b258b309f5df3d37d10c82f01492c0394181c2a
vp9_rb_bytes_written -> vp9_wb_bytes_written
+ move limits.h from the header to the source file where it's needed
Change-Id: Ifcdc856b4d4dcc2fff555ef11f86c86a0d83dab3
This patch allows the encoder to directly split the block
in partition search, therefore skip searching NONE. It
computes a score which measures whether 16x16 motion vectors
from the first pass in the current block are consistent with
each others. If they are inconsistent and we have enough Q
to encode, split the block directly, and skip searching NONE.
This feature is under flag CONFIG_FP_MB_STATS. In speed 2,
it further gives a speedup of 3-8% on sample yt clips as
compared to the previous version under the same flag. Overall,
the features under the flag will give 7-15% on typical yt
clips at up to 6000kbps data rate. The speedup at very high
data rate is not significant.
For hard stdhd clips:
park_joy_1080p @ 15000kbps: 504541ms -> 506293ms (-0.35%)
pedestrian_area_1080p @ 2000kbps: 326610ms -> 290090ms (+11.2%)
The compression performance using the features under the flag:
derf: -0.068%
yt: -0.189%
hd: -0.318%
stdhd:-0.183%
To use the feature, set CONFIG_FP_MB_STATS and turn on
cpi->use_fp_mb_stats.
Change-Id: Iad58a2966515c8861aa9eb211565b1864048d47f
This code was being called from two places and
difficult to parse. I rationalized it in to a
function to improve readability.
Change-Id: I154b8fe0b84e6c01e69601e78e67bd47c954d8b6
Re-organize the one-byte structure for 16x16 first pass
block. Add bits to indicate motion vector directions.
Change-Id: Id10754ba343dfc712c7fed5bcc85c67fa0bbcb89
vp9_variance8x8(), and vp9_get8x8var().
On a Nexus 7, vpxenc (in realtime mode, speed -12)
reported a performance improvement of ~1.2%.
Change-Id: I8a66ac2a0f550b407caa27816833bdc563395102
- vp9_spatial_svc_encoder.c no longer supports the -m parameter that
has been used in the example test. Tests using -m have been disabled.
- Added a basic test that appears to work as of commit
3249f26ff8.
- Minor style clean up.
Change-Id: Ic1402fcbbe28e33982c5ea12d1e3349f4069a5bf
- Split vpxdec wrapper function into vpxdec() and vpxdec_pipe().
- Remove hard coded --noblit and --summary arguments from
the wrappers in favor of shifting off the first argument (the
input file) and passing all remaining parameters to vpxdec.
- Add --noblit and --summary args to existing tests, and update the
pipe input test to use vpxdec_pipe().
Change-Id: Ia390a9990eace793058b3603ada733fb878eb78c
This patch allows the encoder to skip the search for partition
SPLIT, HORZ, VERT after the search for partition NONE is done
in RD optimization. It uses the first pass block-wise statistics
to make the decision. If all 16x16 blocks in the current partition
have zero motions and small residues from the frist pass statistics,
and it has small difference variance, further partition search is
skipped.
For speed 2 setting, experiments on general youtube clips show that
the speedup varies from 1% - 10%, 5% on average. On the performance
side in PSNR, derf 0.004%, yt -0.059%, hd -0.106%, stdhd 0.032%.
For hard stdhd clips:
park_joy_1080p, 502952 ms -> 503307 ms (-0.07%)
pedestrian_area_1080p, 227049 ms -> 220531 ms (+3%)
This feature is under the compilation flag CONFIG_FP_MB_STATS and
it is off in current setting.
Change-Id: I554537e9242178263b65ebe14a04f9c221b58bae
Remove the variable that indicates the relative block index. This
is explicitly covered by the use of pc_tree.
Change-Id: Ib13142582fff926c85e375bde656aa050add8350
extract only the md5 + quote the result
fixes:
test/examples.sh: 47: local: img-176x144-0029.i420: bad variable name
Change-Id: I81c6a83c8a4e792a520fd7046c8eedcbd4af9a0c
This commit enables a chessboard pattern constrained partition
search for 720p and above resolutions. The scheme applies stricter
partition search to alternative blocks based on its above/left
neighboring blocks' partition range, as well as that of the
collocated blocks in the previous frame. It is currently turned
on at 16x16 block size level. The chessboard pattern is flipped
per coding frame.
The speed 3 runtime is reduced:
park_joy_1080p, 652832 ms -> 607738 ms (7% speed-up)
pedestrian_area_1080p, 215998 ms -> 200589 ms (8% speed-up)
The compression performance is changed:
hd -0.223%
stdhd -0.295%
Change-Id: I2d4d123ae89f7171562f618febb4d81789575b19
vp9_variance16x16(), and vp9_get16x16var().
On a Nexus 7, vpxenc (in realtime mode, speed -12)
reported a performance improvement of ~16.7%.
Change-Id: Ib163aa99f56e680194aabe00dacdd7f0899a4ecb
currently the only way to know if multiple alt-refs are enabled is to
inspect the encoder instance.
this reduces the size of the allocation by 75% when not using multiple
alt-refs
Change-Id: Ie4baa240c2897e64b766c6ad229674884b5a65b6
When building with runtime cpu detect assume that armv7 targets can be
relied upon to have at least armv6 support. This may allow dead code
detectors to remove some _c functions.
Change-Id: Iaec4414011fcbbdf6f4ed0d90ef4a8fe8af540b5
This commit replace the repetitive retrieve of max and min allowed
partition from speed_feature with local variables max_size and
min_size.
Change-Id: Ib06f11f16615e4876e4dd5fb6a968c6bf5f7b216
The get_chessboard_index() used to call the entire VP9_COMMON
struct pointer to retrieve the chessboard pattern index. This cl
makes it call the frame index directly.
Change-Id: I3cad9d209ea2e77a358085a04fe1ff0ddec5ba03
Remove the redundant index computation when store the first
pass block-wise statistics. Currently, a single byte is
allocated for a 16x16 blocks, and all the frame statistics
saved during the first pass will be kept in memory for use
in the second pass. For a 1920x1080 300-frame clip, it will
take about 2.3 MB memory. This feature is off in current
setting.
Change-Id: I135a95b348ec093d54c6a07e1e8237626909e3bd
Remove all the redundant dct functions (dct4x4, dct8x8)
in avx2 except dct32x32 those functions were copied originally from dct_sse2
Change-Id: I742576fbf5175f3ac09f2076976a9247b259323e
The original implementation only allocates one segmentation map and this
works fine for serial decode. But for frame parallel decode, each thread
need to have its own segmentation map and the last frame segmentation map
should be provided from last frame decoding thread.
After finishing decoding a frame, thread need to serve the old segmentation
map that associate with the previous decoded frame. The thread also need to
use another segmentation map for decoding the current frame.
Change-Id: I442ddff36b5de9cb8a7eb59e225744c78f4492d8
The issue was introduced by commit g9f37d14 with adding explicit
restrictions on reference-frame scale factors. The restriction
is checked against aligned-by-8 frame dimensions, not against
original ones. So, for example, frame of 35×35 actually can refer
to frame of 70×70, but the new check won't allow this. It will
compare 35 vs 72 (not 70), so 2x downscale limit will be exceeded.
Change-Id: Ic663693034440f64ac8312cbff9e1e773a921060
The partition search for 4x4 blocks takes unnecessary steps to
reconstruct pixels and an extra partition type update. This commit
removes such operations. No visible compression/speed difference.
Thanks to Yue (yuec@) for finding this issue.
Change-Id: I3f83824aa3fd3717d63be0b280fa57258939a70a
The code fails the unit test. Speed comparisons to the C are invalid
because the code frequently didn't correctly extend the right and
bottom portions of the frame.
Reduce maximum frame size on ARM devices to avoid OOM
Change-Id: Ia664c86406f0bb8120fd7ad401f32d0bd44994fb
The source buffer is an aligned buffer in VP9. Added the alignment
to make it consistent with libvpx.
Change-Id: I3ebb9d2e8555ed532951da479dd5cbbb8812e02d
This commit turns on the existing vp9_get_prob function using
64 bit in the intermediate step. It fixes the ioc issue for 4K
above frame sizes (issue 828).
Change-Id: I9f627f3beca2c522f73b38fd2a3e7eefdff01a7c
The assignment of the variable mode_excluded in
vp9_rd_pick_inter_mode_sub8x8 takes redundant conditional jump.
This commit removes it.
Change-Id: Ie195fbe6e54ec2ade7093d562c456a2e93143704
Ensure consistent border extension by rounding uv_crop_* at image
creation time. Where it was rounded problems could arise with the right
and bottom extensions.
When padding = 32, y_width = 64, and y_crop_width = 63:
(padding + width - crop_width + 1) / 2
32 + 64 - 63 + 1 should equal 32 *but*
32 + 1 + 1 equals 34 giving a right buffer of 17 instead of 16.
By calculating uv_crop_* earlier we round up at the appropriate time and
for the same values:
(y_crop_width + 1) / 2
63 + 1 / 2
64
(padding / 2) + uv_width - uv_crop_width
16 + 16 - 16
16
Change-Id: If866cd1b63444771440edb1432280ac83875969b
A previous change, https://gerrit.chromium.org/gerrit/#/c/70632,
introduced a size validation for reference frames to insuare the
input stream is a valid VP9 stream. However, the logic requiring
all reference frames have valid size turned out to be too strict.
In this commit, we modify the validation to require one of the
reference frame has valid dimension. In addition, the decoder
reports error whenever it detects the use of reference frame
with invalid scalig ratio.
Change-Id: If8efc312244087556cfe00f1fcbdff811268ebad
'auto_help' was added to Getopt::Long in 2.33
this isn't strictly necessary as an unrecognized option (--help) will
issue a warning and then print the usage
Change-Id: Ia757553a4e19d22a8eb70768a8866ab1a76a0eec
The patch:
https://gerrit.chromium.org/gerrit/#/c/70814/
changed the test that determined whether the context
frame buffers needed to be reallocated or not.
The code checked for a change in total frame area
to signal the need to reallocate context buffers.
However, the above_context buffer needs to be
resized i:xf only the width of the frame has increased.
Change-Id: Ib89d75651af252908144cf662578d84f16cf30e6
--strip-unneeded causes SIGSEGV when accessing g_executable_path. So
test_libvpx crashes due to SIGSEGV in ::testing::InitGoogleTest().
OS/2, aout, strip v2.23.2
Change-Id: I2718d082447ee0d9ad0c021b9156c50e1ac085a6
1. Remove last reference flag for first frame upper layers in one pass mode.
2. Disable refresh golden frame flag for key frames.
Change-Id: I44ac1bd2c795169e4fbfdd078ea79a1d33a204d6
The value of mode_excluded has been properly set in
vp9_rd_pick_inter_mode_sb(). It is redundant to send it in
handle_inter_mode() and re-set the value again.
Change-Id: I408d4731f2f42e0bcf3ae62e85757717bb410471
This commit extends the chessboard pattern prediction filter search.
If the above and left blocks have the same prediction filter type,
the encoder will skip the prediction filter type search and use the
reference one.
The overall chessboard pattern prediction filter type search reduces
speed 3 runtime for hard clips. Experiments on park joy at 1080p
and 15000 kbps show that the runtime goes from 723265 ms to 65832 ms,
i.e., about 10% speed-up. Compression performance wise, it affects
the coding quality by
Change-Id: I880975497c7ad166532e9eea9bf46684d77ff327
derf: -0.326%
yt: -0.257%
hd: -0.241%
stdhd: -0.417%
This commit enables a chessboard pattern prediction filter type
search scheme for rate-distortion optimization speed-up. For the
inferred motion vector modes, the encoder can re-use its above/left
neighbor blocks' prediction filter type and skip a full test on
all possible filter types. Such operation is turned on/off
alternatively in a chessboard manner.
It is turned on in speed 3. For test clip pedestrian 1080p, the
runtime is reduced from 231500 ms -> 221700 ms. The compression
performance is changed:
derf: -0.147%
yt: -0.134%
hd: -0.079%
stdhd: -0.220%
Change-Id: I1912f278e7576c2dc632688e3ad7a257410c605a
VP9FrameSizeTestsLarge exposed an integer overflow in the VP9 encoder,
for now reduce the size to allow the tests to clear and prevent further
regressions.
4096x4096 -> 4096x2160
this should be restored after the bug is fixed:
https://code.google.com/p/webm/issues/detail?id=828
Change-Id: I47fdf0648f1d9a3951f731bbf0b727f85ada4fa1
When OUTPUT_YUV_DENOISED is enabled the encoder outputs the uncompressed,
denoised video to a separate file. Moved the point at which the file is
written to in order to avoid an extra blank frame at the beginning of the video.
Change-Id: I805f6a912b18b3d9cae59b13c5b8108279439ce3
the code tied to CONFIG_MULTIPLE_ARF was deleted in:
2611022 Clean out old CONFIG_MULTIPLE_ARF code.
Change-Id: Ie70bf047cde7e88d4b3996c8ff529e409bbe99e2
This should be a local variable. Move the definition from
vp9_rd_pick_inter_mode_sb to handle_inter_mode.
Change-Id: I14f4168bb1c896ed04e8f6d4cd89fbf4c9839944
Since the UV decision to denoise is based on Y, we need to set
the default/initial denoiser decision_u/v to COPY_BLOCK,
to make sure if no uv_denoiser is applied we still update
(uv)running_avg with source.
Change-Id: I5af1c2afbd40c498cd3de208bea88c837099b24d
On a key frame, the denoised-running_avg for all references
frames should be updated with the source.
The altref denoised-running_avg was not being updated on key frame,
this fixes that.
Change-Id: Ie02cd0ba5383e013af59240e6df7e185d11703f6
For sequences of resolution below 720p, the encoder will check
intra prediction modes and inter prediction modes from LAST_FRAME.
This commit turns on adaptive prediction filter scheme for sub8x8
blocks, where inter prediction modes are enabled. For the test
sequence bus at CIF, the speed 2 runtime goes down from 17879 ms
to 16783 ms, i.e., 6% speed up. The compression performance of
derf set is down by -0.128%.
Change-Id: I01d5321a5ceab4e0666ac5be56c52d896c7a8d45
The commit moved a call to vp9_clear_system_state() to a correct
location, i.e. prior function calls using floating point numbers.
This was to fix a mismatch mmx code and sse2 version, where a
floating point number used in adjust_frame_rate(cpi) gets NAN due
to mmx registers being in wrong state.
Change-Id: I40e0a6de98812000ccee6a729badb630604fd7e6
For gcc, when libvpx config option debug is disabled, added the
flag -DNDEBUG to disable the assertions in libvpx for some speedup.
Change-Id: Ifcb7b9e8ef5cbe5d07a24407b53b9a2923f596ee
This patch adds back in code that checks that the frame
size lies within defined bounds was inadvertantly removed
by a previous patch:
https://gerrit.chromium.org/gerrit/#/c/70814/
Change-Id: If526570ba559260c4b7e98098bc75f7700ae7f97
Uses mkstmp() with directory being the same as the test data
directory to create temporary output file. For Windows
GetTempFileNameA() function is used.
Change-Id: Ie4681b2b4f44f8c22d3b3faf134c44087b484f94
This undoes a check that attempted to insure on 32 bit machines allocations
bigger than 32 bit failed, but it failed before the test could be hit,
revert that for now so we can do a roll
Change-Id: Ib607de6675c10100b716df94eb329649633509c8
If the img allocation fails the test used to crash before on
32 bit architecture. This patch uses null check on img in
FillFrame. Also, if the first frame initialization has not been
conducted VPX_CODEC_ERROR is expected to return rather than
VPX_CODEC_OK.
Change-Id: I5c4e59c156374009012d280d6ff971a89b43c11f
Separates HBD profile int two profiles (2 and 3) consistent with the
highbitdepth branch. This patch is ported from the original highbitdepth
branch patch: https://gerrit.chromium.org/gerrit/#/c/70460/
Two of the invalid file tests needed to be updated.
Change-Id: I6a4acd2f7a60b1fb4cbcc8e0dad4eab4248431e3
The bug sets the wrong pointer to the first pass mb stats
if the encoder does the re-coding in the second pass.
Change-Id: I8a11f45dd7dceb38de814adec24cecccae370d00
This patch is the first step toward simplifying the
frame buffer handling.
The final goal is to have a common frame buffer handling
framework for both encoder and decoder that incorporates
the existing ability to use externally allocated memory.
Change-Id: I2c378a4f54a39908915f46c4260e17a080db7ff1
This is a practical concern to allow us to fail in a decoder instance
if the size of a file is bigger than we can reasonably handle.
Change-Id: I0446b5502b1f8a48408107648ff2a8d187dca393
This commit changed the hard-coded DEFAULT_INTERP_FILTER to a speed
feature with the same default value: SWITCHABLE.
Change-Id: I7f54f40f1bd3f5277841d04b85db7a84e47313f1
and vp9_sad16x16_neon()
On a Nexus 7, vpxenc (in realtime mode, speed -6)
reported a performance improvement of ~17%.
Change-Id: I91e070cde2973451083d3f3d63b49b7886de9a85
Adds support for raw yuv inputs in 422/444 sampling for use
in profiles 1 and 3.
New options added to vpxenc are:
--i422 and --i444, which are to be used in conjunction with
--width, --height, and --fps for proper raw yuv handling.
A new option is added to vpxdec:
--rawvideo, which enforces raw yuv video output for the
bit-stream decoded irrespective of 420, 422 or 444 sampling.
The existing options --i420 and --yv12
are specialized for use only for 420 content.
Change-Id: I2e3028380709afa673bf2e2c25ad5e271a626055
2 pass only change to calculation of rd mult based on Q.
Make a small adjustment based on frame type and also
replace adjustment based on iifactor with an one based
on the ambient GF/ARF boost level.
Also fix multi arf bug / issue.
Overall these change give an slight improvement in ssim
but hurt psnr a little.
Change-Id: I5e1751e3ff5390a26f543d7855059e6fbcce105e
We target this speed to achieve similar encoding speed and better
compression than vp8 rt mode with cpu-used at -12.
Change-Id: Ic1bb4371c81a17ea80e83459c1cbf4c09a3498e8
The issue was introduced by commit g7c43fb6. If current frame
is repeated from existing-ref pool, frame buffer ref counter
is not decreased, so buffer isn't released. Decoder fails being
unable to allocate new frame buffer at some point.
Added a test vector to verify that the condition will not
recur later. Test vector was generated by the code in this patch:
https://gerrit.chromium.org/gerrit/#/c/70862/
Change-Id: I8af96eb5b9670176e01a281d2e18bd458712cf78
In vp8, statistics are collected about the different modes as they are searched.
This process is more complicated due to the variable block size. Fields were
added to the PICM_MODE_CONTEXT struct to hold this information for each point in
the search. The information is then taken from the appropriate part of the tree
during denoising.
Change-Id: I89261ab77ad637821287ae157dfdf694702b8e77
pthread.h is not supported in windows. vp9_thread.h includes
the emulation layer for pthread in windows.
Change-Id: I2b1c8ec299928472faca7ebeea998170c9f4d744
Sets the bit-depth field as default 8 in the image structure in vp8.
Generalizes yuv read in preparation for support for reading 422/444
for 8-bit and 10/12-bit.
Change-Id: I560c13c348b122fd028e408431156376b895058c
All changes are for spatial svc only.
1. Enable encoding hidden frames in each layer and use alt reference idex to reference the hidden frame in each layer
2. Use golden reference idx for spatial reference
3. For those layers that don't have hidden frames (caused by lack of frame buffers), reference a hidden frame in lower layers
4. Add "auto-alt-refs" in svc options
Change-Id: Idf27d1fd2fb5f3ffd9e86d2119235e3dad36c178
fixes visual studio 9 + apple clang builds where the template type is
interpreted as char[] rather than const char*:
::f1_' : cannot specify explicit initializer for arrays
error: array initializer must be an initializer list or string literal
Change-Id: I27286ce341b2f7a09b6202caffd6b72f64fd2234
This commit fixes a potential out-of-boundary memory access due to
the use of reuse_inter_pred_sby in the non-RD coding flow. It
resolves the corresponding asan error.
Change-Id: Iff605f5921230966990013541cd855d698810922
This commit fixes a mismatched use case of block size in non-RD
intra prediction check. The residual SSE and variance should be
calculated per transform block size, instead of operating block
size, which caused chrome valgrind warning on conditional jump
based on uninitialized value (webm issue 823). This commit
resolves this issue.
Change-Id: I595c06599c7e0fd0e4a08736519ba68fc14bc79a
Prepare for frame parallel decoding, the reference count buffers
need to be protected by mutex. Move vp9_thread.* to common
folder so that those buffers could use cross-platform mutex
from vp9_thread.*.
(cherry picked from commit 337e8015c9)
Change-Id: I0587a08447925f4554d7788686a31483c2ae3f37
Also fix bugs related with corrupted frame handling.
Return VPX_CODEC_CORRUPT_FRAME when getting corrupted
block.
Change-Id: I7207ccc7c68c4df2b40b561315d16e49ccf7ff41
Refactoring to remove some duplication of probability
tables between tokenization and detokenization.
Change-Id: I2fc6a6497f9c0410021a9b41f828bc58a864e466
Use a weaker filter for second level arf frames.
Average gain across all sets and metrics ~0.3%
Remove code for arnr_type which is no longer
supported in VP9 which always uses a centered blur.
Re-factor and some cleanup.
Change-Id: Ieb4b8940e99e4e02b3fcc9fca6f2d4109e6ed639
Specifying the --prefix command line arg executes all test programs within the
context of the prefix string, which is assigned to VPX_TEST_PREFIX.
All test functions updated to include VPX_TEST_PREFIX in their eval command.
Change-Id: I2e215cc8f216048edf3269db02a6b5660fe32318
used to wrap API functions to ensure full environment consistency as
opposed to the renamed ASM_REGISTER_STATE_CHECK which is used with
assembly functions.
currently checks the FPU tag word in x86/x86_64 gcc builds to ensure
emms has been called.
Change-Id: Ie241772dbf903d33d516a1add4c8c6783f2e1490
pull the latest from libwebp.
Original source:
http://git.chromium.org/webm/libwebp.git
100644 blob 264210ba2807e4da47eb5d18c04cf869d89b9784 src/utils/thread.c
commit 46fd44c1042c9903b2f1ab87e9f200a13c7e702d
Author: James Zern <jzern@google.com>
Date: Tue Jul 8 19:53:28 2014 -0700
thread: remove harmless race on status_ in End()
if a thread was still doing work when End() was called there'd be a race
on worker->status_. in these cases, however, the specific value is
meaningless as it would be >= OK and the thread would have been shut
down properly, but we'll check 'impl_' instead to avoid any potential
TSan/DRD reports.
Change-Id: Ib93cbc226a099f07761f7bad765549dffb8054b1
Change-Id: Ib0ef25737b3c6d017fa74822e21ed58508230b91
Currently, vp9_diamond_search_sadx4() is only called when sse3 is
enabled, which is improper since sse2 optimization of sdx4df
functions are available. Changed to always use
vp9_diamond_search_sadx4().
Change-Id: I4b95d6b7a3c6c645783c373f0ba8d645ece24717
- fix indent, spelling
- drop some whitespace in some comments
- add an assert in vp9_setup_mask, it shouldn't be called on decode
error
Change-Id: Ic312a815e977a6f9cb81ceb7b039eeada76c5aa0
There are sse2 optimization of sdx4df functions. Instead of calling
vp9_refining_search_sadx4 only when sse3 is enabled, call it always.
Change-Id: I24f93818f7d4209d1425039e0eb099ff9ff08fe9
Use FAST_HEX in speed 5 and 6, which covers more points than
FAST_DIAMOND and improves motion search quality.
At speed 6, RTC set borg tests showed slight quality gain (psnr
gain: 0.143%, ssim gain: 0.226%). No noticeable encoding speed
change.
Change-Id: Ifa62875d9a52ee382ec494f271382bb77d8c67bf
This commit combined the full pel and sub pel motion search into a
single function to avoid code duplication. The commit does not change
encoder outputs.
Change-Id: Ibe18342c4f64073bef20f9cf6c6ca0a20d01bf0d
This commit enables a new quantization process for 32x32 2D-DCT
transform coefficient blocks. It improves the compression
performance of speed 5 by 1.4%. The overall compression gains of
speed 5 due to the new quantization scheme is 4.7%. It also includes
the SSSE3 implementation of the 32x32 quantization process.
Change-Id: I0855b124fd6462418683f783f5bcb44255c9993b
This patch fixes bug 633:
https://code.google.com/p/webm/issues/detail?id=633
The first decoded frame does not have to be a keyframe,
it could be an inter-frame that is coded intra-only.
This patch fixes the handling of intra-only frames.
A test vector has also been added that encodes 3
intra-only frames at the start of the clip. The
test vector was generated using the code in the
following patch:
https://gerrit.chromium.org/gerrit/#/c/70680/
Change-Id: Ib40b1dbf91aae2bc047e23c626eaef09d1860147
In the previous version, only certain buffers in the macroblockd were saved and
the restored. In this version, all of the buffers are saved and restored. The
code was then rolled into a loop for readability.
Also contains a tiny fix for when the -DOUTPUT_YUV_DENOISED flag is used.
Change-Id: Id925ef8b3fa122ae88acfa1d9a1e4df45df83518
vp8/encoder/x86/denoising_sse2.c:35:10: error: taking the absolute value
of unsigned type 'unsigned int' has no effect [-Werror,-Wabsolute-value]
Change-Id: I749ba8e6f55dbd9b822bfd4260a8397554f5e524
Prepare for frame parallel decoding, the reference count buffers
need to be protected by mutex. Move vp9_thread.* to common
folder so that those buffers could use cross-platform mutex
from vp9_thread.*.
Change-Id: I541277cf15eefed6641555944f67f4a0bcdc8154
* Replace max_step_search_steps with constant MAX_MVSEARCH_STEPS
* Fold (reduce_first_step_size + speed > 5) into reduce_first_step_size
replacing uses of reduce_first_step_size that don't add the speed
check with zero.
Change-Id: Iae46395dbf3eaca138bf4d18b838a9e364b5a198
The y4m extension used is the same as the one used in ffmpeg/x264.
The patch is adapted from the highbitdepth branch.
Also adds unit tests for y4m header parsing and md5 check
of the raw frame data, as well as y4m writing.
[build fix for Mac/VS by not using tuples with strings]
Change-Id: I40897ee37d289e4b6cea6fedc67047d692b8cb46
The relationship of the user private data at runtime
is not preserved from decode() to this call which may
occur at an unknown point in the future
Change-Id: Ia7eb25365c805147614574c3af87aedbe0305fc6
Prepare for frame parallel decoding, the frame buffers must be
separated from the encoder and decoder structure, while the encoder
and decoder will hold the pointer of the BufferPool.
Change-Id: I172c78f876e41fb5aea11be5f632adadf2a6f466
vp9_rdopt is for making rd optimal mode decisions. vp9_rd is for all
other rd related routines. Anything used outside of making an rd optimal
decision belongs in rd.
Change-Id: I772a3073f7588bdf139f551fb9810b6864d8e64b
Moved the threshold adjustment before reference flag checking,
which could set the threshold to INT_MAX for disabled reference
frame, and cause overflow if the adjustment is done after that.
Change-Id: I85e94f8726d5e3ae93f65965aa978721dddc9957
Renamed updating_running_avg() to filter(). Extended function with the rest of
the filter procedure. Made all of the empirically-determined constants used in
VP8 into functions so they can be tweaked more easily.
Change-Id: I41730c8c92370c76885950a43742347477ca4e7e
As in VP8.
Currently, this parameter is set with the VP8E_SET_NOISE_SENSITIVITY flag.
The flag was not renamed so that we don't break the interface for webrtc. This
should probably be changed at some point in the future.
Change-Id: Ic73fcb0dde9d1d019e9d042050b617333ac65472
Add test code to turn multi-arf on and off depending
on group length and zero motion.
Changes to active max group length for mult-arf.
Fund second arf only from normal frame bits.
Change-Id: I920287fac1c886428c15a39f731a25d07c2b796c
This commit added a speed feature to control the step_param used in
full pixel motion search. The intention is to reduced the search
steps for high speed real time coding.
Change-Id: I21d2f0105c2b647783a6688615da7fcf2b6d670b
Adapt the use of segmentation in AQ mode 2 based on
the ambient kf/arf/gf Q.
Disable segmentation where the rate per SB is very
low and overheads are likely to outweigh the benefits.
This patch reduces the -ve average metrics impact
of AQ mode 2 while allowing stronger 3 segment AQ
in some cases. Average improvement ~0.5-1.0%.
Change-Id: I5892dfcc7507c5cc6444531cc7fe17554cf8d0c7
The y4m extension used is the same as the one used in ffmpeg/x264.
The patch is adapted from the highbitdepth branch.
Also adds unit tests for y4m header parsing and md5 check
of the raw frame data, as well as y4m writing.
Change-Id: Ie2794daf6dbafd2f128464f9b9da520fc54c0dd6
for debugging purposes.
continues decoding after receiving a decode error. will still exit with
an error after the current loop, ignoring remaining --loops
Change-Id: I011a71b866ff493a3f3bbb59e9bff998d19daee3
This commit re-designs the quantization process for transform
coefficient blocks of size 4x4 to 16x16. It improves compression
performance for speed 7 by 3.85%. The SSSE3 version for the
new quantization process is included.
The average runtime of the 8x8 block quantization is reduced
from 285 cycles -> 255 cycles, i.e., over 10% faster.
Change-Id: I61278aa02efc70599b962d3314671db5b0446a50
Add a conditional compile flag for this feature. Also add a
switch to enable the encoder to use these statistics in the
second pass. Currently, the switch is turned off.
Change-Id: Ia1c858c35ec90e36f19f5cffe156b97ddaa04922
The current threshold is knid of low, and in many cases NEWMV
mode is checked but not picked as the best mode. This patch
added a speed feature to increase NEWMV threshold, so that
less partition mode checking goes to check NEWMV. This feature
is enabled for speed 6 and 7.
Rtc set borg tests showed:
1. Speed 6, overall psnr: -0.088%, ssim: -1.339%;
Average speedup on rtc set is 11.1%.
2. Speed 7, overall psnr: -0.505%, ssim: -2.320%
Average speedup on rtc set is 12.9%.
Change-Id: I953b849eeb6e0d5a1f13eacba30c14204472c5be
pull the latest from WebP, which adds a worker interface abstraction
allowing an application to override init/reset/sync/launch/execute/end
this has the side effect of removing a harmless, but annoying, TSan
warning.
Original source:
http://git.chromium.org/webm/libwebp.git
100644 blob 08ad4e1fecba302bf1247645e84a7d2779956bc3 src/utils/thread.c
100644 blob 7bd451b124ae3b81596abfbcc823e3cb129d3a38 src/utils/thread.h
Local modifications:
- s/WebP/VP9/g
- camelcase functions -> lower with _'s
- associate '*' with the variable, not the type
Change-Id: I875ac5a74ed873cbcb19a3a100b5e0ca6fcd9aed
The caller should reset the state instead of letting worker
to reset.
This reverts commit 34b2ce15f9.
Change-Id: Idb546ea6386cffc44e98dee772900d21ab79710f
Encoder still uses SWITCHABLE as default via DEFAULT_INTERP_FILTER,
but does not override the default if it is not SWITCHABLE.
Change-Id: I3c0f6653bd228381a623a026c66599b0a87d01d5
When the frame is intra coded only, the encoder takes the RD
coding flow. Hence the function set_mode_info is not practically
in use. This commit removes it and the associated conditional
branches.
Change-Id: I1e42659ceb55b771ba712d1cdecacb446aa6460d
This fixes the hang in VP9/InvalidFileTest.ReturnCode/3
due to worker->had_error has not been reset after getting
error.
Change-Id: Ia3608225094758a2bd88f6ae4dd9dfd93bbaad27
For real time speed 7, once encode breakout is on(i.e. encoding
setting --static-thresh=1), a proper encode breakout threshold
is set to speed up the encoder.
Set --static-thresh=1, RTC set borg test showed a slight overall
psnr loss of 0.162%, but ssim gain of 0.287%. The average speedup
on RTC set is 6%, and for some clips, the speedup can be 10+%.
Change-Id: Id522d9ce779ff7c699936d13d0c47083de4afb85
Before encoding a frame, calculate and store each 16x16 block's
variance of source difference between last and current frame.
Find partitioning threshold T for the frame from its variance
histogram, and then use T to make partition decisions.
Comparing with fixed 16x16 partitioning, rtc set test showed an
overall psnr gain of 3.242%, and ssim gain of 3.751%. The best
psnr gain is 8.653%.
The overall encoding speed didn't change much. It got faster for
some clips(for example, 12% speedup for vidyo1), and a little
slower for others.
Also, a minor modification was made in datarate unit test.
Change-Id: Ie290743aa3814e83607b93831b667a2a49d0932c
this file is an include and doesn't need to be built on its own.
fixes:
ranlib: file: libvpx_g.a(x86inc.asm.o) has no symbols
Change-Id: I89504e37ff0a4488489af7b9b7e09fb32acc4853
the buffer is only used in encoding and only when
CONFIG_INTERNAL_STATS or CONFIG_VP9_POSTPROC is enabled.
a future change should decouple this from the frame buffer allocation
and make it conditional based on runtime flags when the above config
options are enabled.
reduces decode heap usage by at least 12%
Change-Id: Id0b97620d4936afefa538d3aadf32106743d9caf
This reverts commit b336356198.
This causes a hang in:
VP9/InvalidFileTest.ReturnCode/3
the change to test/user_priv_test.cc remains with a minor update
Change-Id: I4a8a272ca37ea329b0f413f0b1cd827a238bd9fd
Encoding screen content exercises various fast skip paths that are
missed by natural video content.
Change-Id: Ie359884ef9be89cbe5dda6d82f1f79360604a090
This patch checks that a decoder never tries to reference frame that's
outside the range of 2x to 1/16th the size of this frame. Any attempt
to do so causes a failure.
Change-Id: I5c98fa7bb95ac4f29146f29dd92b62fe96164e4c
Set the proper number of mb_rows/cols.
Also remove warnings (unused variable) when configured with temporal-denoising disabled.
Change-Id: I8abd2372394ee55295feb87a66efd294ea6989d0
Bug introduced in I930dced169c9d53f8044d2754a04332138347409. If
svc.number_temporal_layers == 1 and svc.number_spatial_layers == 1, the system
attempt to do spatial SVC. It no longer does that.
Change-Id: Ie6b130a72b1eea40c547c9a64447e40695f811c5
For the primary arf in a group, if multiple arfs
are enabled and we were using arfs in the previous
group, then allow the second arf from the previous
group to be used as an additional reference.
Change-Id: Iaf41706a52f54ef21548026851cd77100d6aebda
This commit enables an adaptive transform size selection method
for speed -6. It uses largest transform size when the sse is more
than 4 times of variance, i.e., most energy is compacted in the
DC coefficient. Otherwise, use the default TX_8X8. It improves
the compression efficiency for rtc set of speed -6 by 0.8%, no
speed change observed.
Change-Id: Ie6ed1e728ff7bf88ebe940a60811361cdd19969c
This patch allows the encoder to skip the partition search for the
frame if it is an inter frame and only zero motion vectors have
been detected in the first pass. The partition size is directly
assigned according to the difference variance.
Borg tests show overall little performance changes in term of PSNR
(derf -0.027%, yt 0.152%, hd 0.078%, stdhd 0%). The worst case of
PSNR loss is -0.514% from yt. The best PSNR gain is 4.293% from yt.
The second pass encoding speedup for slideshow clips is 15%-40%.
Change-Id: I881f347d286553ee5594a9ea09ba1a61ac684045
C version and sse2 version, and off by default.
For the test clip used, the sse2 performance improved by ~5.6%
Change-Id: Ic2d815968849db51b9d62085d7a490d0e01574f6
This commit enables a fast reference motion vector search scheme.
It checks the nearest top and left neighboring blocks to decide the
most probable predicted motion vector. If it finds the two have
the same motion vectors, it then skip finding exterior range for
the second most probable motion vector, and correspondingly skips
the check for NEARMV.
The runtime of speed -5 goes down
pedestrian at 1080p 29377 ms -> 27783 ms
vidyo at 720p 11830 ms -> 10990 ms
i.e., 6%-8% speed-up.
For rtc set, the compression performance
goes down by about -1.3% for both speed -5 and -6.
Change-Id: I2a7794fa99734f739f8b30519ad4dfd511ab91a5
Bug introduced during multiple iterations on: I3831*
gf_group->arf_update_idx[] cannot currently be used
to select the arf buffer index if buffer flipping on overlays
is enabled (still currently the case when multi arf OFF).
Change-Id: I4ce9ea08f1dd03ac3ad8b3e27375a91ee1d964dc
This commit fixes the potential issue in the non-RD mode decision
flow that only checks part of the block to estimate the cost. It
was due to the use of fixed transform size, in replacing the
largest transform block size. This commit enables per transform
block cost estimation of the intra prediction mode in the non-RD
mode decision.
Change-Id: I14ff92065e193e3e731c2bbf7ec89db676f1e132
same reasoning as:
9f3a0db vp9_rtcd: correct avx2 references
these are all intrinsics, so don't depend on x86inc.asm
Change-Id: I915beaef318a28f64bfa5469e5efe90e4af5b827
This patch reverts the previous revert from Jim and also add a
variable user_priv in the FrameWorker to save the user_priv
passed from the application. In the decoder_get_frame function,
the user_priv will be binded with the img. This change is needed
or it will fail the unit test added here:
https://gerrit.chromium.org/gerrit/#/c/70610/
This reverts commit 9be46e4565.
Change-Id: I376d9a12ee196faffdf3c792b59e6137c56132c1
Cosmetic patch only in response to comments on
previous patches suggesting a couple of name changes
for consistency and clarity.
Change-Id: Ida3a359b0d5755345660d304a7697a3a3686b2a3
like vpx_codec_decode(), vpx_codec_peek_stream_info() takes an unsigned
int, not size_t, parameter for buffer size
Change-Id: I4ce0e1fbbde461c2e1b8fcbaac3cd203ed707460
the max is 6. there are assumptions throughout the decode regarding
this; fixes a crash with a fuzzed bitstream
$ zzuf -s 5861 -r 0.01:0.05 -b 6- \
< vp90-2-00-quantizer-00.webm.ivf \
| dd of=invalid-vp90-2-00-quantizer-00.webm.ivf.s5861_r01-05_b6-.ivf \
bs=1 count=81883
Change-Id: I6af41bb34252e88bc156a4c27c80d505d45f5642
This commit replaces a few use cases of cpi->common with preset
variable cm, to avoid unnecessary pointer fetch in the non-RD
coding mode.
Change-Id: I4038f1c1a47373b8fd7bc5d69af61346103702f6
In real-time speed 6, no partition search is done. The inter
prediction results got from picking mode can be reused in the
following encoding process. A speed feature reuse_inter_pred_sby
is added to only enable the resue in speed 6.
This patch doesn't change encoding result. RTC set tests showed
that the encoding speed gain is 2% - 5%.
Change-Id: I3884780f64ef95dd8be10562926542528713b92c
There is a normative scaling range of (x1/2, x16)
for VP9. This patch fixes the maximum downscaling
tests that are applied in the convolve function.
The code used a maximum downscaling limit of x1/5
for historic reasons related to the scalable
coding work. Since the downsampling in this
application is non-normative it will revert to
using a separate non-normative scaler.
Change-Id: Ide80ed712cee82fe5cb3c55076ac428295a6019f
Add indirection to the section of buffer indices.
This is to help simplify things in the future if we
have other codec features that switch indices.
Limit the max GF interval for static sections to fit
the gf_group structures.
Change-Id: I38310daaf23fd906004c0e8ee3e99e15570f84cb
Fix some bugs relating to the use of buffers
in the overlay frames.
Fix bug where a mid sequence overlay was
propagating large partition and transform sizes into
the subsequent frame because of :-
sf->last_partitioning_redo_frequency > 1 and
sf->tx_size_search_method == USE_LARGESTALL
Change-Id: Ibf9ef39a5a5150f8cbdd2c9275abb0316c67873a
This patch implements a mechanism for inserting a second
arf at the mid position of arf groups.
It is currently disabled by default using the flag multi_arf_enabled.
Results are currently down somewhat in initial testing if
multi-arf is enabled. Most of the loss is attributable to the
fact that code to preserve the previous golden frame
(in the arf buffer) in cases where we are coding an overlay
frame, is currently disabled in the multi-arf case.
Change-Id: I1d777318ca09f147db2e8c86d7315fe86168c865
The encoder currently allocates frame buffers before
it establishes what the chroma sub-sampling factor is,
always allocating based on the 4:4:4 format.
This patch detects the chroma format as early as
possible allowing the encoder to allocate buffers of
the correct size.
Future patches will change the encoder to allocate
frame buffers on demand to further reduce the memory
profile of the encoder and rationalize the buffer
management in the encoder and decoder.
Change-Id: Ifd41dd96e67d0011719ba40fada0bae74f3a0d57
This patch insures that the last byte of a chunk that contains a
valid superframe marker byte, actually has a proper superframe index.
If not it returns an error.
As part of doing that the file : vp90-2-15-fuzz-flicker.webm now fails
to decode properly and moves to the invalid file test from the test
vector suite.
Change-Id: I5f1da7eb37282ec0c6394df5c73251a2df9c1744
Avoids failures:
MSE_ClearKey/EncryptedMediaTest.Playback_VP9Video_WebM/0
MSE_ClearKey_Prefixed/EncryptedMediaTest.Playback_VP9Video_WebM/0
MSE_ExternalClearKey_Prefixed/EncryptedMediaTest.Playback_VP9Video_WebM/0
MSE_ExternalClearKey/EncryptedMediaTest.Playback_VP9Video_WebM/0
MSE_ExternalClearKeyDecryptOnly/EncryptedMediaTest.Playback_VP9Video_WebM/0
MSE_ExternalClearKeyDecryptOnly_Prefixed/EncryptedMediaTest.Playback_VP9Video_WebM/0
SRC_ExternalClearKey/EncryptedMediaTest.Playback_VP9Video_WebM/0
SRC_ExternalClearKey_Prefixed/EncryptedMediaTest.Playback_VP9Video_WebM/0
SRC_ClearKey_Prefixed/EncryptedMediaTest.Playback_VP9Video_WebM/0
Patches are
This reverts commit 9bc040859b
This reverts commit 6f5aba069a
This reverts commit 9bc040859b
I1f250441 Revert "Refactor the vp9_get_frame code for frame parallel."
Ibfdddce5 Revert "Delay decreasing reference count in frame-parallel decoding."
I00ce6771 Revert "Introduce FrameWorker for decoding."
Need better testing in libvpx for these commits
Change-Id: Ifa1f279b0cabf4b47c051ec26018f9301c1e130e
Another project in ChromeOS is using these files. To make libvpx
rolls simpler, add these files back unitl the other project removes
the dependency.
crbug.com/387246 tracking bug to remove dependency.
Change-Id: If9c197081c845c4a4e5c5488d4e0190380bcb1e4
When decoding in serial mode, there will be only
one FrameWorker doing decoding. When decoding in
parallel mode, there will be several FrameWorkers
doing decoding in parallel.
Change-Id: If53fc5c49c7a0bf5e773f1ce7008b8a62fdae257
See: https://code.google.com/p/chromium/issues/detail?id=362697
The code properly catches an invalid stream but seg faults instead of
returning an error due to a buffer not having been initialized. This
code fixes that.
Change-Id: I695595e742cb08807e1dfb2f00bc097b3eae3a9b
This patch adds a mechanism for insuring error checking on invalid files
by creating a unit test that runs the decoder and tests that the error
code matches what's expected on each frame in the decoder.
Disabled for now as this unit test will segfault with existing code.
Change-Id: I896f9686d9ebcbf027426933adfbea7b8c5d956e
s/stdint.h/vpx\/vpx_int.h
Added missing 'break;'s
Also included other minor changes, mostly cosmetic.
Change-Id: I852bba3e85e794f1d4af854c45c16a23a787e6a3
The test for this is in test vector code ( show existing frames will
fail ). I can't check it in disabled as I'm changing the generic
test code to do this:
https://gerrit.chromium.org/gerrit/#/c/70569/
Change-Id: I5ab324f0cb7df06316a949af0f7fc089f4a3d466
This commit allows the key frame to search through more prediction
modes and more flexible block sizes. No speed change observed. The
coding performance for rtc set is improved by 1.7% for speed -5 and
3.0% for speed -6.
Change-Id: Ifd1bc28558017851b210b4004f2d80838938bcc5
A superframe is a bunch of frames that bundled as one frame. It is mostly
used to combine one or more non-displayable frames and one displayable frame.
For frame parallel decoding, libvpx decoder will only support decoding one
normal frame or a super frame with superframe index.
If an application pass a superframe without superframe index or a chunk
of displayable frames without superframe index to libvpx decoder, libvpx
will not decode it in frame parallel mode. But libvpx decoder still could
decode it in serial mode.
Change-Id: I04c9f2c828373d64e880a8c7bcade5307015ce35
This breaks the profile 1 bitstream.
Don't force non420 uv transform size to 1/4 y size. In the 4:2:0 case the
chroma corresponding to a luma block is 1/4 its size. In the 4:4:4 case
chroma and luma planes are the same size. Disallowing larger transforms
can result in a loss of compression efficiency and is inconsistent.
For sub-8x8 blocks only average corresponding motion vectors.
4:2:0 and profile 0 behavior remains unchanged.
Change-Id: I560ae07183012c6734dd1860ea54ed6f62f3cae8
- Rename build_targets to build_framework
- Add functions for creating the vpx_config shim and obtaining
preproc symbols.
Change-Id: Ieca6938b9779077eefa26bf4cfee64286d1840b0
Speed 6 uses small tx size, namely 8x8. max_intra_bsize needs to
be modified accordingly to ensure valid intra mode checking.
Borg test on RTC set showed an overall PSNR gain of 0.335% in speed
-6.
This also changes speed -5 encoding by allowing DC_PRED checking
for block32x32. Borg test on RTC set showed a slight PSNR gain of
0.145%, and no noticeable speed change.
Change-Id: I1502978d8fbe265b3bb235db0f9c35ba0703cd45
This is the first step to rework the rate-distortion modeling used
in rtc coding mode. The overall goal is to make the modeling
customized for the statistics encountered in the rtc coding.
This commit makes encoder to perform rate-distortion modeling for
DC and AC coefficients separately. No speed changes observed.
The coding performance for pedestrian_area_1080p is largely
improved:
speed -5, from 79558 b/f, 37.871 dB -> 79598 b/f, 38.600 dB
speed -6, from 79515 b/f, 37.822 dB -> 79544 b/f, 38.130 dB
Overall performance for rtc set at speed -6 is improved by 0.67%.
Change-Id: I9153444567e5f75ccdcaac043c2365992c005c0c
strip trailing '/' from paths, this is later converted to '\' which
causes execution errors for obj_int_extract/yasm. vs10+ wasn't affected
by this issue, but make the same change for consistency.
gen_msvs_proj:
+ add missing '"' to obj_int_extract call
unlike gen_msvs_vcproj, the block is duplicated
missed in: 1e3d9b9 build/msvs: fix builds in source dirs with spaces
Change-Id: I76208e6cdc66dc5a0a7ffa8aa1edbefe31e4b130
This patch allows the VP9 encoder to skip the un-necessary
motion search in the first pass. It computes the motion error
of 0,0 motion using the last source frame as the reference,
and skips the further motion search if this error is small.
Borg test shows overall the patch gives PSNR gain (derf -0.001%,
yt 0.341%, hd 0.282%). Individual clips may have PSNR gain or
loss. The best PSNR performance is 7.347% and the worst is -0.662%.
The first pass encoding speedup for slideshow clips is over 30%.
Change-Id: I4cac4dbd911f277ee858e161f3ca652c771344fe
Allow for an option to selectively apply the deblocking loop filter to the denoised
raw block, based on the denoised state (no-filter, filter with zero motion, or filter with non-zero motion)
of the current block and its upper and left denoised block.
This helps to reduce some blocking artifacts from the motion-compensated denoising.
Change-Id: I0ac4e70076df69a98c5391979e739a2681e24ae6
This commit fixes frame header decoding for superframe index, to
prevent out of boundary memory read triggered by fuzz test
vector. It resolves a chromium security violation issue
crbug.com/376802.
The issue was introduced in the change:
Add VPXD_SET_DECRYPTOR support to the VP9 decoder.
cl-id I88f86c8ff9af34e0b6531028b691921b54c2fc48
where the buffer was read before validation check on index offset
applied.
A test vector is added accordingly.
Change-Id: I41c988e776bbdd1033312a668e03a3dbcf44ca99
This patch appears to have introduced non-determinism and/or
mismatch from debug vs release.
This reverts commit 5daef90efc.
Change-Id: I80081e55cfeaaa821b510b58a4e6e6328003c7da
The current decoding scheme will decrease the reference count
of the output frame when finish decoding. Then the application
could copy the frame from the decoder buffer to application buffer.
In frame-parallel decoding, a decoded frame will not be outputted
until several frames later which depends on thread numbers. So
the decoded frame's reference count should be decreased only
after application finish copying the frame out. But due to the
limitation of vpx_codec_get_frame, decoder could not know when
application finish decoding. So use a index last_show_frame to
release the last output frame's reference count.
Change-Id: I403ee0d01148ac1182e5a2d87cf7dcc302b51e63
This commit enables a fast path computational flow for forward
transformation. It checks the sse and variance of prediction
residuals and decides if the quantized coefficients are all
zero, dc only, or more. It then selects the corresponding coding
path in the forward transformation and quantization stage.
It is currently enabled in rtc coding mode. Will do it for rd
coding mode next.
In speed -6, the runtime for pedestrian_area 1080p at 1000 kbps
goes down from 14234 ms to 13704 ms, i.e., about 4% speed-up.
Overall coding performance for rtc set is changed by -0.18%.
Change-Id: I0452da1786d59bc8bcbe0a35fdae9f623d1d44e1
This patch allows the encoder to skip the
un-neccessary motion search in the first pass. It
calculates the error of the zero motion vector using
the last source frame as reference and skips the
further motion search in the first pass if the error
is small.
The encoding speedup of the first pass for slideshow
videos is over 30%. Borg test shows the overall PSNR
performance remain approximately the same (derf -0.009,
hd 0.387, yt 0.021, stdhd 0.065). Individual clips may
have either PSNR gain or loss. The worst PSNR perfomance
is from yt set, with a PSNR loss of -1.1.
Change-Id: I08b2ab110b695e4689573b2567fa531b6457616e
* Only use ZEROMV, disalowing the intra modes that were previously
tested.
* Score rate and distortion as zero.
Change-Id: Ifcf99e272095725f11da1dcd26bd0f850683e680
Really just armv7. This is a convenience target intended to make iOS
development with libvpx easier. Xcode projects with default settings
will fail to build when a framework lacks armv7s support when targetting
iOS7.
Change-Id: I7eb80d52eec25501febc0d2c3c0b4ed964b8ed5b
tests failing under Win32/Win64
+ dct16x16_test: add missing avx2 functions (partially disabled)
exercises the forward transforms
no idct/iht implementations, so the c-code is used
Change-Id: I04f64a457fa0828a00f32b5c9fe4f55294f21f61
When this compiler flag is enabled, the encoder will write a denoised,
uncompressed, version of the input to denoised.yuv.
Change-Id: Ie0247f76b23219d95fe97dd70f23e097d742c249
When superframe index is available we completely rely on it and use frame
size values from the index.
Change-Id: I0011d08b223303a8b912c2bcc8a02b74d0426ee0
2014-05-12 16:41:17 -07:00
1079 changed files with 247888 additions and 177878 deletions
EXPECT_EQ(0,(*iter-1)%30)<<"Unexpected keyframe at frame "
<<*iter;
<<*iter;
else
EXPECT_EQ(0,*iter%30)<<"Unexpected keyframe at frame "<<*iter;
}
Some files were not shown because too many files have changed in this diff
Show More
Reference in New Issue
Block a user
Blocking a user prevents them from interacting with repositories, such as opening or commenting on pull requests or issues. Learn more about blocking a user.
