This was suggested by wm4 and stefano.
After this patch using align=1 the size used by various functions would not
contain padding, while the palette would be aligned at align>1
This patch makes it required to use align>=4 if the palette is to be accessed
as uint32
As a side-effect It fixes storing pal8 in nut with odd with&height
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Fixes harmless integer overflow
Fixes Ticket5150
No speedloss measured, actually its slightly faster, but please benchmark & double check this
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
This avoid "libavformat/genh.c:43:14: warning: variable coef_splitted set but not used"
Fewer warnings makes it easier to see new and important warnings
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
1. Manipulate waiting count in pthread_cond_wait()
2. Use builtin atomic functions to manipulate waiting count
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
2.5x faster for 8-bit mode without autovectorization in GCC, 2x
slower with it on x86. However, since the platforms we enable GCC
autovectorization on most probably has support for SSE2
optimization (added in the subsequent commit), this commit should
in general do good.
VLC uses hwaccel with frame threads and it works fine, but returning
an error here made it fail.
This regression was introduced in commit 31741ae.
Signed-off-by: Andreas Cadhalpun <Andreas.Cadhalpun@googlemail.com>
Warning message text by nevcairiel
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Currently it is broken when explicitly using the file protocol, it uses an
insecure temporary file name, and in commit b4431c80 disabling the option by
default was already considered. Also it is not very consistent to have such an
option for one particular muxer.
Signed-off-by: Marton Balint <cus@passwd.hu>
Add support for parsing SEI_TYPE_MASTERING_DISPLAY_INFO and propagate contents into
the AVMasteringDisplayMetadata side data. Primaries are ordered in RGB order and
the values are converted to rationals ([0,1] for CEI 1931 Chroma coords,
and cd/m^2 for luma).
Signed-off-by: Neil Birkbeck <neil.birkbeck@gmail.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Current if statement would always be false due to assigning the value of
S_OK which equals 0.
Signed-off-by: FearThe1337 <git@fearthe1337.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
This allows disabling the alignment by using a compact buffer
Reviewed-by: Stefano Sabatini <stefasab@gmail.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
This will extend the whitelist features to allow blacklisting individual protocols and to
explicitly force everything to be enabled.
Reviewed-by: Stefano Sabatini <stefasab@gmail.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Results in dropping out in channels, usually on EIGHT_SHORT windows.
Will be reenabled once the cause has been investigated and a fix has
been made.
Signed-off-by: Rostislav Pehlivanov <atomnuker@gmail.com>
Also remove similar but confusing and less useful example.
Based on geq expression by Patrick Race <raceink at gmail>.
Signed-off-by: Lou Logan <lou@lrcd.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Takes into account whether there's pairing and if there's an LFE channel.
An SCE has more bits than CPE/2 since IS and M/S save quite a lot of bits
when channels are paired. And most of the SCEs we have are in surround
layouts which map it to the center channel, which usually carries all of
the dialogue and compression artifacts there are easily audiable.
Also refactors the init function a little bit and labels some parts of it.
Fixes bug #5233
Signed-off-by: Rostislav Pehlivanov <atomnuker@gmail.com>
Fixes: CID1351392
Fixes: CID1351393
Fixes: CID1351395
Reviewed-by: Paul B Mahol <onemda@gmail.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
This was first reported on the mailing list in an earlier revision of this
encoder but was forgotten from the final commit.
Signed-off-by: Rostislav Pehlivanov <atomnuker@gmail.com>
This commit adds a new encoder capable of creating BBC/SMPTE Dirac/VC-2 HQ
profile files.
Dirac is a wavelet based codec created by the BBC a little more than 10
years ago. Since then, wavelets have mostly gone out of style as they
did not provide adequate encoding gains at lower bitrates. Dirac was a
fully featured video codec equipped with perceptual masking, support for
most popular pixel formats, interlacing, overlapped-block motion
compensation, and other features. It found new life after being stripped
of various features and standardized as the VC-2 codec by the SMPTE with
an extra profile, the HQ profile that this encoder supports, added.
The HQ profile was based off of the Low-Delay profile previously
existing in Dirac. The profile forbids DC prediction and arithmetic
coding to focus on high performance and low delay at higher bitrates.
The standard bitrates for this profile vary but generally 1:4
compression is expected (~525 Mbps vs the 2200 Mbps for uncompressed
1080p50). The codec only supports I-frames, hence the high bitrates.
The structure of this encoder is simple: do a DWT transform on the
entire image, split it into multiple slices (specified by the user) and
encode them in parallel. All of the slices are of the same size, making
rate control and threading very trivial. Although only in C, this encoder
is capable of 30 frames per second on an 4 core 8 threads Ivy Bridge.
A lookup table is used to encode most of the coefficients.
No code was used from the GSoC encoder from 2007 except for the 2
transform functions in diracenc_transforms.c. All other code was written
from scratch.
This encoder outperforms any other encoders in quality, usability and in
features. Other existing implementations do not support 4 level
transforms or 64x64 blocks (slices), which greatly increase compression.
As previously said, the codec is meant for broadcasting, hence support
for non-broadcasting image widths, heights, bit depths, aspect ratios,
etc. are limited by the "level". Although this codec supports a few
chroma subsamplings (420, 422, 444), signalling those is generally
outside the specifications of the level used (3) and the reference
decoder will outright refuse to read any image with such a flag
signalled (it only supports 1920x1080 yuv422p10). However, most
implementations will happily read files with alternate dimensions,
framerates and formats signalled.
Therefore, in order to encode files other than 1080p50 yuv422p10le, you
need to provide an "-strict -2" argument to the command line. The FFmpeg
decoder will happily read any files made with non-standard parameters,
dimensions and subsamplings, and so will other implementations. IMO this
should be "-strict -1", but I'll leave that up for discussion.
There are still plenty of stuff to implement, for instance 5 more
wavelet transforms are still in the specs and supported by the decoder.
The encoder can be lossless, given a high enough bitrate.
Signed-off-by: Rostislav Pehlivanov <atomnuker@gmail.com>
The type of the option has been changed but the limit was apparently forgotten.
Some video codes can handle bitrates of over ~2.2 Gbps (like VC-2).
Signed-off-by: Rostislav Pehlivanov <atomnuker@gmail.com>
This also deprecates our old duplicated callbacks.
* commit '9f61abc8111c7c43f49ca012e957a108b9cc7610':
lavf: allow custom IO for all files
Merged-by: Derek Buitenhuis <derek.buitenhuis@gmail.com>
4.9 was released precisely nine years after the first GCC version with
autovectorizer (4.0) and six years after the first GCC version with
`-ftree-vectorize` default to enabled on `-O3` (4.3). We've given GCC
enough time to fix those bugs.
FATE passes here on a x86-64 machine with both GCC 4.9.2 and 5.3.1.
Some optimization hotspots benefit greatly from this change, especially
those without handwritten assembly. For instance, the main function in
vf_phase is now 1.6x faster (1.2x overall) on my machine.
Silences: CID1351343
The header is calculated by the code above the changed hunk, it is
thus asserted that the header is always correct.
Reviewed-by: "Ronald S. Bultje" <rsbultje@gmail.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Otherwise the 'lcov -q --remove' run fails with the following error:
lcov: ERROR: cannot write to coverage.info!
Signed-off-by: Andreas Cadhalpun <Andreas.Cadhalpun@googlemail.com>
When out-of-tree builds now use a relative path, the '-b' option of lcov
is not needed, so just pass the current directory to it in this case.
Signed-off-by: Andreas Cadhalpun <Andreas.Cadhalpun@googlemail.com>
Or when building in-tree.
Also don't try to remove src on distclean in these cases.
Signed-off-by: Andreas Cadhalpun <Andreas.Cadhalpun@googlemail.com>
Up to ~4 times faster on x86_64, ~8 times on x86_32 if compiling using x87 fp math.
Reviewed-by: Ronald S. Bultje <rsbultje@gmail.com>
Signed-off-by: James Almer <jamrial@gmail.com>
Using rNm and x86inc's stack allocation with a negative value at the same
time isn't supported, and caused the original stack pointer to be clobbered
when using a compiler that doesn't support stack alignment.
Checked compatiblity with VLC, Windows Media Player 12 and Windows Media ASF
Viewer 9 series.
Reviewed-by: Michael Niedermayer <michael@niedermayer.cc>
Signed-off-by: Marton Balint <cus@passwd.hu>
The next frame time could slip, causing the frame rate to drop until
frames were dropped. Now will capture at the next correct moment instead.
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
The parser only parses the core, and thus has a duration relative
to the core sample rate only, not the actual stream sample rate.
FATE references changed due to now correct timestamps.
This is a NOOP.
* commit '002c47798da0c43a053822c8041144798d49ed84':
x86inc: Avoid creating unnecessary local labels
x86inc: Simplify AUTO_REP_RET
x86inc: Use more consistent indentation
x86inc: Preserve arguments when allocating stack space
x86inc: Improve FMA instruction handling
x86inc: Be more verbose in assertion failures
x86inc: Make cpuflag() and notcpuflag() return 0 or 1
Merged-by: Derek Buitenhuis <derek.buitenhuis@gmail.com>
As it is already written in the documentation, BMD DeckLink cards
are capable of capturing 2, 8 or 16 audio channels (for SDI Inputs).
Currently the value is hardcoded to 2. Introduces new option.
Reviewed-by: Deti Fliegl <deti@fliegl.de>
Signed-off-by: Matthias Hunstock <atze@fem.tu-ilmenau.de>
Signed-off-by: Marton Balint <cus@passwd.hu>
Note to maintainers: update tools
Note to maintainers: set a default whitelist for your protocol
If that makes no sense then consider to set "none" and thus require the user to specify a white-list
for sub-protocols to be opened
Note, testing and checking for missing changes is needed
Reviewed-by: Andreas Cadhalpun <andreas.cadhalpun@googlemail.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
This reverts commit 8ed82d8174.
SMPTE S377-1-2009c defines in F.4.1 that the Video Line Map should
always be an array with two 32 bit integers as elements. This is
repeated in G.2.12 with actual examples for progressive content,
where the second value would always be 0.
Additionally, the IRT MXF analyser also lists this as the only
error in the MXF output from ffmpeg: https://mxf-analyser-cloud.irt.de
Reviewed-by: Tomas Härdin <tomas.hardin@codemill.se>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Due to this bug in VC++ 2015 Update 1:
https://connect.microsoft.com/VisualStudio/feedback/details/2291638
the 'key' array in ff_read_riff_info() ends up being not null
terminated which led to failures in a Chromium unit tests. Update 2
should have a fix, but until then it is important to avoid problems.
This fixes retrieving a valid profile for many of the FATE conformance samples,
allowing them to be properly decoded by the HWAccel after adding a profile check.
The index creation is O(N^2) with number of entries (typically thousands).
On a Pi this can take more than 60 seconds to execute for a recording of a few hours.
By replacing with an O(N) loop, this takes virtually zero time
Liked-by: Paul B Mahol <onemda@gmail.com>
Reviewed-by: Peter Ross <pross@xvid.org>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Since timecode_frame)start is a private option now, it stays at the default,
and is no longer written to the file.
Signed-off-by: Derek Buitenhuis <derek.buitenhuis@gmail.com>
Decodes YUV 4:2:2 10-bit and RGB 12-bit files.
Older files with more subbands, skips, Bayer, alpha not supported.
Alpha requires addition of GBRAP12 pixel format.
Some muxer use the FLV field PreviousTagSize to be the sum of tag
length. Without this change, the flv demuxer think the file is broken
and the re-sync will fail.
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
From
https://msdn.microsoft.com/en-us/library/windows/desktop/dd318229%28v=vs.85%29.aspx:
"If biCompression equals BI_RGB and the bitmap uses 8 bpp or less, the
bitmap has a color table immediatelly following the BITMAPINFOHEADER
structure. The color table consists of an array of RGBQUAD values. The
size of the array is given by the biClrUsed member. If biClrUsed is
zero, the array contains the maximum number of colors for the given
bitdepth; that is, 2^biBitCount colors."
Nothing about "monochrome" here. Unfortunately, pal8 to monow conversion
seems a bit flaky, but that's another story.
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
The COPYING.LIB file in the zvbi source tree as well as libzvbi.h references
the GNU Library General Public License version 2 since version 0.2.28.
Signed-off-by: Marton Balint <cus@passwd.hu>
This option can force the segmenter to only start a new segment if a packet
reaches the muxer within the specified duration after the segmenting clock
time, which makes it more resilient to backward local time jumps, such as leap
seconds or transition to standard time from daylight savings time.
Reviewed-by: Stefano Sabatini <stefasab@gmail.com>
Signed-off-by: Marton Balint <cus@passwd.hu>
The private options chromaoffset, sc_threshold, and noise_reduction
were set to 0 rather than -1, and were always initializing values
in libx264 rather than letting the library use its default.
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
After the merge the default threshold was unconditionally overwritten
A similar fix was written by Vittorio Giovara, but i didnt see that before
i wrote this and it also doesnt apply cleanly
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
This uses a new MMAL feature, which limits the number of extra frames
that can be buffered within the decoder. VIDEO_MAX_NUM_CALLBACKS can
be defined as positive or negative number. Positive numbers are
absolute, and can lead to deadlocks if the user underestimates the
number of required buffers. Negative numbers specify the number of extra
buffers, e.g. -1 means no extra buffer, (-1-N) means N extra buffers.
Set a gratuitous default of -11 (N=10). This is much lower than the
firmware default, which appears to be 96.
This is backwards compatible, but needs a symbol only present in newer
firmware headers. (It's an enum item, so it requires a check in
configure.)
These will be re-merged once it's been fixed properly.
This reverts:
* Commit '8e7bea6dc6ac5b21484774a026847bec0771ab62'
configure: Improve requesting specific features
* Commit 'e93aa2c9e7b3599aee6a5820760fc1a2c629dea0'
configure: Force-enable select_any dependencies only on --enable
Signed-off-by: Derek Buitenhuis <derek.buitenhuis@gmail.com>
* commit 'd43a165bda0eae95f4c7a168c7d13d94966c1a09':
imgconvert: Add the proper API guards to a deprecated function
Merged-by: Derek Buitenhuis <derek.buitenhuis@gmail.com>
* commit '892f037c55d86ce36f8705fbeab052189312a13e':
imgconvert: Move the shrink functions only where needed
Merged-by: Derek Buitenhuis <derek.buitenhuis@gmail.com>
Libav, for some reason, merged this as a public API function. This will
aid in future merges.
A define is left for backwards compat, just in case some person
used it, since it is in a public header.
Signed-off-by: Derek Buitenhuis <derek.buitenhuis@gmail.com>
commit "avpacket: Deprecate av_dup_packet" broke the use
av_interleaved_write_uncoded_frame as any input uncoded frame has an
invalid packet size that will crash when av_packet_ref tries to allocate
'size' new memory. Since the packet is a temporary created within mux.c
itself it can be used directly without needing a new ref.
Signed-off-by: Matt Oliver <protogonoi@gmail.com>
level can be 5, but there are only four codebooks.
Fixes ubsan runtime error: index 5 out of bounds for type 'int8_t
[4][96]'
Reviewed-by: Michael Niedermayer <michael@niedermayer.cc>
Signed-off-by: Andreas Cadhalpun <Andreas.Cadhalpun@googlemail.com>
The purpose of this patch is to preserve timestamps when using ffmpeg for publishing RTMP streams, e.g. ffmpeg -i rtmp://source/stream -f flv rtmp://target/stream.
There is a setting "copyts" for that purpose. Unfortunately it doesn't work with FLV muxer because it has its own timestamp correction which makes global setting "copyts" ineffective.
This patch removes timestamp correction in FLV muxer. This means FLV will rely on ffmpeg timestamp correction which makes it possible to use copyts.
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
If links don't work, fall back to using the full source path as was
previously done.
This should fix build failures with MSVC.
Reviewed-by: Hendrik Leppkes <h.leppkes@gmail.com>
Signed-off-by: Andreas Cadhalpun <Andreas.Cadhalpun@googlemail.com>
The line alignment for 1 bpp raw AV_PIX_FMT_MONOWHITE video (currently
used for AVI) was previously 4 bytes, which generated alignment warning
messages, not only for odd-width files. The alignment is now 16 bytes.
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
This patch aligns the lines of 1 bpp depth for QuickTime, and 2, 4 and 8
bpp depths for AVI and QuickTime, on 16-byte boundaries. At the same
time, the packet row stride is properly catered for.
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Possibly the check as a whole causes more problems than it helps, if so dont
hesitate to remove it
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Sample rate of 11025 takes 16 bits but previous code would pick only 8.
Fixes assertion failure.
Reviewed-by: Rostislav Pehlivanov <atomnuker@gmail.com>
Signed-off-by: Paul B Mahol <onemda@gmail.com>
Some (de)muxers open additional files beyond the main IO context.
Currently, they call avio_open() directly, which prevents the caller
from using custom IO for such streams.
This commit adds callbacks to AVFormatContext that default to
avio_open2()/avio_close(), but can be overridden by the caller. All
muxers and demuxers using AVIO are switched to using those callbacks
instead of calling avio_open()/avio_close() directly.
(de)muxers that use the URLProtocol layer directly instead of AVIO
remain unconverted for now. This should be fixed in later commits.
Fix configure to set DST_PATH to the Windows style path when building with MSVC
Fixes ticket #5180.
Signed-off-by: Andreas Cadhalpun <Andreas.Cadhalpun@googlemail.com>
Some debuggers/profilers use this metadata to determine which function a
given instruction is in; without it they get can confused by local labels
(if you haven't stripped those). On the other hand, some tools are still
confused even with this metadata. e.g. this fixes `gdb`, but not `perf`.
Currently only implemented for ELF.
Signed-off-by: Anton Khirnov <anton@khirnov.net>
The REP_RET workaround is only needed on old AMD cpus, and the labels clutter
up the symbol table and confuse debugging/profiling tools, so use EQU to
create SHN_ABS symbols instead of creating local labels. Furthermore, skip
the workaround completely in functions that definitely won't run on such cpus.
Note that EQU is just creating a local label when using nasm instead of yasm.
This is probably a bug, but at least it doesn't break anything.
Signed-off-by: Anton Khirnov <anton@khirnov.net>
When allocating stack space with a larger alignment than the known stack
alignment a temporary register is used for storing the stack pointer.
Ensure that this isn't one of the registers used for passing arguments.
Signed-off-by: Anton Khirnov <anton@khirnov.net>
* Correctly handle FMA instructions with memory operands.
* Print a warning if FMA instructions are used without the correct cpuflag.
* Simplify the instantiation code.
* Clarify documentation.
Only the last operand in FMA3 instructions can be a memory operand. When
converting FMA4 instructions to FMA3 instructions we can utilize the fact
that multiply is a commutative operation and reorder operands if necessary
to ensure that a memory operand is used only as the last operand.
Signed-off-by: Anton Khirnov <anton@khirnov.net>
Full range video had been broken by the introduction of the < 2U check
at the following line. The bitstream format kind of implies that the full
and limited ranges use different pix_fmts but that's incorrect since we
have the avctx->color_range flag. So adjust the pixel range index to
be mapped to the same pix_fmts as limited range index.
Signed-off-by: Rostislav Pehlivanov <atomnuker@gmail.com>
adds two new options that may be set via the dictionary:
- send_buffer_size
- recv_buffer_size
When present, setsockopt() is used with SO_SNDBUF and SO_RCVBUF to set
socket buffer sizes. I chose to make send and receive independent
because buffering requirements are often asymmetric.
Errors in setting the buffer size mean the socket will use its
default, so they are ignored.
There is no sanity checking on values, as the kernel/socket layers
already impose reasonable limits if asked for something crazy.
Rationale for enlarging receive buffers is to reduce susceptibility
to intermittent network delays/congestion. I added setting the send
buffer for symmetry.
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Further speedups possible by getting rid of exp2f...
Reviewed-by: Paul B Mahol <onemda@gmail.com>
Signed-off-by: Ganesh Ajjanagadde <gajjanagadde@gmail.com>
Faster methods possible; since exponent is always a multiple of 1/8.
Reviewed-by: Michael Niedermayer <michael@niedermayer.cc>
Signed-off-by: Ganesh Ajjanagadde <gajjanagadde@gmail.com>
Much faster generation possible; but array is small so don't want to bloat
the binary.
Reviewed-by: Michael Niedermayer <michael@niedermayer.cc>
Signed-off-by: Ganesh Ajjanagadde <gajjanagadde@gmail.com>
Allow more of the cabac functions to be overridden and avoid generating any
code for unwanted refill functions.
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
When refilling the low bit buffer after get_cabac count the bits with ctz
if the processor has a fast version.
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Ensure that cabac init sets the bitstream pointer to an even value.
It is often faster to load from an aligned boundry
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Previously the full source path was embedded inconsistently in the debug
information between in-tree/out-of-tree builds.
The 'vpath %.inc' becomes necessary for finding
libavfilter/all_channel_layouts.inc in out-of-tree builds.
The full source path is still embedded in the debug information, but
it's now independent of whether building in-tree or out-of-tree.
The biggest improvement of this patch is that gdb now always searches
for the path relative to the source directory. It still also searches
for the full path.
Previously it searched only for the full path in out-of-tree builds,
making the debug information generated by Debian's buildds rather hard
to use.
Reviewed-by: Michael Niedermayer <michael@niedermayer.cc>
Signed-off-by: Andreas Cadhalpun <Andreas.Cadhalpun@googlemail.com>
Some debuggers/profilers use this metadata to determine which function a
given instruction is in; without it they get can confused by local labels
(if you haven't stripped those). On the other hand, some tools are still
confused even with this metadata. e.g. this fixes `gdb`, but not `perf`.
Currently only implemented for ELF.
The REP_RET workaround is only needed on old AMD cpus, and the labels clutter
up the symbol table and confuse debugging/profiling tools, so use EQU to
create SHN_ABS symbols instead of creating local labels. Furthermore, skip
the workaround completely in functions that definitely won't run on such cpus.
Note that EQU is just creating a local label when using nasm instead of yasm.
This is probably a bug, but at least it doesn't break anything.
When allocating stack space with a larger alignment than the known stack
alignment a temporary register is used for storing the stack pointer.
Ensure that this isn't one of the registers used for passing arguments.
* Correctly handle FMA instructions with memory operands.
* Print a warning if FMA instructions are used without the correct cpuflag.
* Simplify the instantiation code.
* Clarify documentation.
Only the last operand in FMA3 instructions can be a memory operand. When
converting FMA4 instructions to FMA3 instructions we can utilize the fact
that multiply is a commutative operation and reorder operands if necessary
to ensure that a memory operand is used only as the last operand.
This option is only used by mpegvideoenc.
It is a very codec-specific option, so deprecate the global variant.
Signed-off-by: Vittorio Giovara <vittorio.giovara@gmail.com>
This option is only used by mpegvideoenc.
It is a very codec-specific options, so deprecate the global variant.
Signed-off-by: Vittorio Giovara <vittorio.giovara@gmail.com>
This options is only used by huffyuv, ffvhuv, jpegls, mjpeg,
mpegvideoenc, png, utvideo.
It is a very codec-specific options, so deprecate the global variant.
Set proper limits to the maximum allowed values, and update utvideoenc
tests to use the new option name.
Signed-off-by: Vittorio Giovara <vittorio.giovara@gmail.com>
These options are only used by alac and flac.
They are very codec-specific options, so deprecate the global variants.
Signed-off-by: Vittorio Giovara <vittorio.giovara@gmail.com>
This option is only used by mpegvideoenc and openh264.
It is a very codec-specific option, so deprecate the global variant.
The openh264 option is dropped altogether since it is just a fallback
for -max_nal_size anyway.
Signed-off-by: Vittorio Giovara <vittorio.giovara@gmail.com>
This option is only used by mpeg2.
It is a very codec-specific option, so deprecate the global variant.
Signed-off-by: Vittorio Giovara <vittorio.giovara@gmail.com>
This option is only used by ffv1 and ffvhuff.
It is a very codec-specific option, so deprecate the global variant.
Improve documentation a little.
Signed-off-by: Vittorio Giovara <vittorio.giovara@gmail.com>
This option is only used by mpegvideoenc, and xvid.
It is a very codec-specific option, so deprecate the global variant.
Signed-off-by: Vittorio Giovara <vittorio.giovara@gmail.com>
This option is only used by mpegvideoenc, x264, xavs, and vpx.
It is a very codec-specific option, so deprecate the global variant.
Signed-off-by: Vittorio Giovara <vittorio.giovara@gmail.com>
This option is only used by mpegvideoenc, x264, and xavs.
It is a very codec-specific option, so deprecate the global variant.
Signed-off-by: Vittorio Giovara <vittorio.giovara@gmail.com>
This option is only used by x264 and xavs.
It is a very codec-specific option, so deprecate the global variant.
Signed-off-by: Vittorio Giovara <vittorio.giovara@gmail.com>
These options are only used by mpegvideoenc and vpx.
They are very codec-specific options, so deprecate the global variants.
Add an allowed value to the private options for frame_skip_cmp which
seems to have been forgotten, but perfectly working.
The libvpx frame dropping feature uses one of such option
(frame_skip_threshold) without the other three. For this reason rename
the option to something more consistent with the other libvpx variables.
Signed-off-by: Vittorio Giovara <vittorio.giovara@gmail.com>
This option is only used by mpegvideoenc,
It is a very codec-specific option, so deprecate the global variant.
Set proper limits to the maximum allowed values.
Signed-off-by: Vittorio Giovara <vittorio.giovara@gmail.com>
The b_frame_strategy option is only used by mpegvideoenc, qsv, x264, and
xavs, while b_sensitivity is only used by mpegvideoenc.
These are very codec-specific options, so deprecate the global variants.
Set proper limits to the maximum allowed values.
Signed-off-by: Vittorio Giovara <vittorio.giovara@gmail.com>
It seems to miscompile them
Should fix fate-ra-288 and fate-twinvq
Reviewed-by: Michael Niedermayer <michael@niedermayer.cc>
Signed-off-by: James Almer <jamrial@gmail.com>
The version structure in the main decoder context was not (and
apparently has never been) populated since it was added.
Still, having VC-2 break the existing Dirac Low Delay mode was odd and
easily avoidable had the specifications authors noticed/cared.
Signed-off-by: Rostislav Pehlivanov <atomnuker@gmail.com>
The parser scans for "BBCD" to appear in the bitstream which indicate a
parse info header and once that happens, checks if the parse offsets are
sane. Since random BBCD strings might appear in the bitstream the parser
will emit a pointless warning if that happens.
This commit improves parsing by checking for a valid parse code as well
as keeping the original checks for valid parse offsets. The warnings
were removed as they serve no real purpose.
Signed-off-by: Rostislav Pehlivanov <atomnuker@gmail.com>
The DSP lacked a function needed to convert signed to unsigned. This was
ignored when originally adding support and templating for bit depths
greater than 8. The 10 bit function was used for 12 bit pictures and
resulted in an improper conversion.
Signed-off-by: Rostislav Pehlivanov <atomnuker@gmail.com>
This feature is mostly only used by NLE software, and is
both of dubious value being enabled by default, and a
possible security risk.
Signed-off-by: Derek Buitenhuis <derek.buitenhuis@gmail.com>
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
Before this patch trying to enable only https by issuing
--disable-protocols --enable-protocol=https --enable-gnutls
does not enable https, and
--disable-all --enable-protocols
does not enable libavformat and the protocols component.
Now the default-enabled options are set after the explicitly
disabled/enabled options are evaluated.
If an explicitly enabled option cannot be enabled configure
will fail printing an error message.
This is needed as near infinite values on the input side result in only some
output to be non finite.
Also it may still be insufficient if subsequent computations overflow
Fixes null pointer dereference
Fixes: ae66c0f6c12ac1cd5c2c237031240f57/signal_sigsegv_2618c99_9516_6007026f2185a26d7afea895fbed6e38.ogg
Found-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
Reviewed-by: Claudio Freire <klaussfreire@gmail.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
This feature is not know much or used much AFAIK, and it might be helpfull in
exploits.
No specific case is known where it can be used in an exploit though
subsequent commits depend on this commit though
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Has been marked for removal for over a month and has not been improved
or touched at all since it was implemented.
Signed-off-by: Rostislav Pehlivanov <atomnuker@gmail.com>
Too many crashes observed. Can't be helped until the autocorrelation
function is massively checked for sanity.
Signed-off-by: Rostislav Pehlivanov <atomnuker@gmail.com>
With this, user applications which use custom IO and have set a IO context will not have
their already opened IO context ignored and glob/seq being interpreted
Comments and tests from maintainers of user apps are welcome!
Liked-by: wm4 <nfxjfg@googlemail.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Updates libkvazaar to pass the exact frame rate to Kvazaar by setting
the numerator and denominator separately instead of a single floating
point number. The exact frame rate is needed for writing timing info to
the bitstream.
Requires Kvazaar version 0.8.1.
Signed-off-by: Arttu Ylä-Outinen <arttu.yla-outinen@tut.fi>
This feature is mostly only used by NLE software, and is
both of dubious value being enabled by default, and a
possible security risk.
Signed-off-by: Derek Buitenhuis <derek.buitenhuis@gmail.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Currently scale filter accepts expressions in its width and height
parameters but evaluates them only once at init and replaces them with
their actual values. Later on, if any parameter of incoming frames
changes - ie those were used in the original size expressions - then
they new values will not have any affect for width and heigth values.
They remain the same. This patch makes possible that width and height
expressions be evaluated frame-by-frame basis if width/height/sar/format
properties of incoming frame would change. To retain the current
behaviour and not to break any earlier app, a new config parameter has
been introduced. Its name is "eval" and it has two distinct values:
"init" and "frame". The default value is "init".
This feature is very usefull in case of DVBT mpeg-ts streams where SAR
may change time-by-time from 4/3 to 16/9 and vica-versa and the size
remains the same and you want to create a variable sized output with 1/1
SAR.
Signed-off-by: Bela Bodecs <bodecsb@vivanet.hu>
Reviewed-by: Paul B Mahol <onemda@gmail.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
vf_overlay video filter accepts expressions in its parameters. In
'frame-by-frame' evaluation mode it recalculates them regularly, but
incoming video frame size changes did not reflect in their values. So if
you used width or height of any source videos in expressions as
parameters, they stayed on their initial values. This patch corrects
this bug.
Signed-off-by: Bela Bodecs <bodecsb@vivanet.hu>
Reviewed-by: Paul B Mahol <onemda@gmail.com
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Now that the seek only happens with the right mouse button, it makes
sense to toggle full screen when double-clicking with the left mouse
button, like other video players do.
Signed-off-by: Vittorio Gambaletta <ffmpeg-dev@vittgam.net>
Signed-off-by: Marton Balint <cus@passwd.hu>
Seeking by clicking on the video window can be annoying, because
the user might click on it accidentally while eg. trying to get
focus on it, and ffplay seeks instead.
This commit changes that behaviour to seek only when the right
mouse button is used to click and drag on the window.
Signed-off-by: Vittorio Gambaletta <ffmpeg-dev@vittgam.net>
Signed-off-by: Marton Balint <cus@passwd.hu>
Updates libkvazaar to pass the exact frame rate to Kvazaar by setting
the numerator and denominator separately instead of a single floating
point number. The exact frame rate is needed for writing timing info to
the bitstream.
Requires Kvazaar version 0.8.1.
Signed-off-by: Arttu Ylä-Outinen <arttu.yla-outinen@tut.fi>
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
In the unlikely situation the user decides to set ticks_per_frame
and timebase to a value large enough to overflow.
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
Adding mastering display metadata struct to avutil. The mastering display metadata contains information
about the mastering display color volume (SMPTE 2086:2014).
This info comes from HEVC in the SEI_TYPE_MASTERING_DISPLAY_INFO and is soon to be included in MKV:
https://mailarchive.ietf.org/arch/search/?email_list=cellar&gbt=1&index=sZyfPTM-QY69P-0omfOIiTN622o
so it is similar to SEI FPA / stereo_mode in MKV and as such this patch follows how AVStereo3D is implemented.
I'll add support to HEVC in a follow-up (and MKV when spec is approved).
Signed-off-by: Neil Birkbeck <neil.birkbeck@gmail.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
For http, this avoids spurious warnings about failed requests (e.g.
HTTP error 416 Requested Range Not Satisfiable), if the last packet
is truncated and the size read is bogus.
Signed-off-by: Martin Storsjö <martin@martin.st>
When loading a truncated flv file, it would previously try to do a seek to
the end of every packet read. For some input protocols (such as http), such
repeated seek attempts are cripple the reading performance.
Signed-off-by: Martin Storsjö <martin@martin.st>
* commit '73c8c0341cce9e1a6c4169721f5123f97fc4be2f':
arm: Fix vfp dead code elimination with have_vfp_vm
Merged-by: Hendrik Leppkes <h.leppkes@gmail.com>
* commit 'c69461d73797e02e7a3ab4316050c241fa91f53f':
asfdec: only set asf_pkt->data_size after sanity checks
Merged-by: Hendrik Leppkes <h.leppkes@gmail.com>
* commit 'd1cd20e4e33f8139e150034b3c457302312d81bd':
qsvenc: split encoding frames and reading from the async FIFO
Merged-by: Hendrik Leppkes <h.leppkes@gmail.com>
* commit 'a6259a6ecbad18d58085e4ab23f56151e98d7b53':
qsvenc: properly handle the warning from MFXVideoCORE_SyncOperation
Merged-by: Hendrik Leppkes <h.leppkes@gmail.com>
The option became too aggressive with GCC 6, generating nearly 500
warnings from static const variables defined in assorted headers
Reviewed-by: Michael Niedermayer <michael@niedermayer.cc>
Signed-off-by: James Almer <jamrial@gmail.com>
Fixes out of array access
Fixes: aaa479088e6fb40b04837b3119f47b04/asan_heap-oob_e38c68_8576_9d653078b2470700e2834636f12ff557.tga
Found-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Match the use of AV_PIX_FMT_PAL8 for 1-bit QuickTime Animation in
lavc/qtrle. To reiterate, 1-bit video is not necessary black & white in
QuickTime, merely bi-level. The two colors can be any color. The palette,
either included in the sample description, or the default Macintosh
palette (black & white for 1-bit video) will be set in lavf/qtpalette.
See the QuickTime File Format Specification for details.
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Fixes out of array access
Fixes: 83aedfb29af669c4d6e10f1bfad974d2/asan_heap-oob_1ab42fe_4984_9f6ec14462f8d8a00ea24b320572a963.tif
Found-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
It seems the previous tables where calculated with 32bit integers ignoring
overflows.
Also check for the max qindex, the value is choosen so that the qfactor/offset
fit in int32.
Fixes: 070b7914fd5dfe8f93248bea71363410/asan_static-oob_c8d034_2764_258e20f4a3c79158aecddb61a833d756.drc
Fixes out of array reads
Found-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
TNS was computing filter coefficients incorrectly for short windows
due to a few coefficient addressing bugs. Fixing them fixes lots of
instability with transients (short windows).
I/S energy, especially when it comes to phase cancellations,
needs to use signed coefficients as input, yet it was using
abs'd coefficients. That was a slight bug.
Make sure to properly enforce maximum scalefactor delta in PNS
and I/S, not as an absolute range but relative to the previous
and first scalefactor, the latter important since PNS uses an
implicit inicial scalefactor derived from the global gain, and
encoded in a different way, which makes a big difference in the
allowed range.
Fixes: 372d2df1f04b49e25f109f07f90b1505/asan_heap-oob_2835d2e_8501_99e0114d7ba3a6db885d0b4684d200c1.cine
Fixes out of array read
Found-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Fixes: 372d2df1f04b49e25f109f07f90b1505/asan_heap-oob_2835d2e_8501_99e0114d7ba3a6db885d0b4684d200c1.cine
Fixes out of array read
Found-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Fixes out of array read
Fixes: 1b79b985cdf860ffa228c00ee5497051/signal_sigsegv_1f99d24_315_f0f1fdb451264b1138e9c24eb7d49181.wv
Found-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
This decreases the MV related encoding table sizes
This should have little effect on real world video encoding performance
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
s->ac_val[0][0] is of type 'int16_t [16]', but points into a larger buffer.
Here it is used as base pointer to find the correct position in the
larger buffer by adding 's->block_index[n] * 16' and thus as 'int16_t *'.
This fixes clang's ubsan runtime error: index out of bounds for type
'int16_t [16]'
Fixes: test_case.mp4
Found-by: Tyson Smith <twsmith@mozilla.com>
Reviewed-by: Michael Niedermayer <michael@niedermayer.cc>
Signed-off-by: Andreas Cadhalpun <Andreas.Cadhalpun@googlemail.com>
The function is used on unaligned buffers (such as those provided
by AVPacket), accessing them as uint16_t causes SIGBUS crashes on
architectures like SPARC.
This fixes ubsan runtime error: load of misaligned address for type
'const uint16_t', which requires 2 byte alignment
Signed-off-by: Andreas Cadhalpun <Andreas.Cadhalpun@googlemail.com>
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
Confine the 0x00000000 to 'raw '/'twos' fourcc mapping to old version 0
sound sample descriptions, since they are the only valid sample
descriptions for this type of mapping.
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Fixes out of array accesses
Fixes: 0cf176e6d3ab9fe924f39738e513f547/asan_generic_4a54aa_3431_aaa28be1cb32e307a9890cad06f84fba.avi
Found-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Fixes out of array access
Fixes: 0cf176e6d3ab9fe924f39738e513f547/asan_generic_4a54aa_3431_aaa28be1cb32e307a9890cad06f84fba.avi
Found-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
asf_read_payload can unset eof_reached, so check it also before calling
that function.
This fixes infinite loops.
Reviewed-by: Alexandra Hájková <alexandra.khirnova@gmail.com>
Signed-off-by: Andreas Cadhalpun <Andreas.Cadhalpun@googlemail.com>
Both avio_skip and detect_unknown_subobject use int64_t for the size
parameter.
This fixes a segmentation fault due to infinite recursion.
Reviewed-by: Alexandra Hájková <alexandra.khirnova@gmail.com>
Signed-off-by: Andreas Cadhalpun <Andreas.Cadhalpun@googlemail.com>
This fixes ubsan runtime error: signed integer overflow: 8388608 +
2140274688 cannot be represented in type 'int'
Reviewed-by: Michael Niedermayer <michael@niedermayer.cc>
Signed-off-by: Andreas Cadhalpun <Andreas.Cadhalpun@googlemail.com>
Fixes out of array access
Fixes: asan_heap-oob_445b39_1741_d00eb645ab48eb2203b4a04a5b997103.ivr
Found-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Sometimes rollup captions can move around the screen. This fixes "ghost"
captions from below the current rollup area from continuing to be
captured when a rollup moves higher up on the screen.
This new mode is useful for realtime decoding of closed captions so they
can be display along with mpeg2 frames.
Closed caption streams contain two major types of captions:
- POPON captions, which are buffered off-screen and displayed
only after EOC (end of caption, aka display buffer)
- PAINTON/ROLLUP captions, which are written to the display as soon as
they arrive.
In a typical real-time eia608 decoder, commands like EOC (end of
caption; display buffer), EDM (erase display memory) and EBM (erase
buffered memory) perform their expected functions as soon as the
commands are processed. This is implemented in the real_time branches
added in this commit.
Before this commit, and in the !real_time branches after this commit,
the decoder cleverly implements its own version of the decoder which is
specifically geared towards buffered decoding. It does so by actively
ignoring commands like EBM (erase buffered memory), and then re-using
the non-display buffer to hold the previous caption while the new one is
received. This is the opposite of the real-time decoder, which uses the
non-display buffer to hold the new caption while the display buffer is
still showing the current caption.
In addition to ignoring EBM, the buffered decoder also has custom
implementations for EDM and EOC. An EDM (erase display memory) command
flushes the existing contents before clearing the screen, and EOC
similarly always flushes the active buffer (the previous subtitle)
before flipping buffers.
Fixes: out of array reads
Fixes: 07e8b9c5d348ccdf7add0f37de20cf6c/asan_heap-oob_27e8df7_6849_e56653f768070ec8cb52f587048444c2.mov
Found-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
This makes SWS more robust
Fixes: 07650a772d98aa63b0fed6370dc89037/asan_heap-oob_27ddeaf_2657_2c81ff264dee5d9712cb3251fb9c3bbb.264
Fixes: out of array read
Found-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
This is quite an accurate approximation; testing shows ~ 2ulp error in
the floating point result. Tested with FATE.
Alternatively, if one wants "full accuracy", one can use powf, or sqrt
instead of sqrtf. With powf, one gets 1 ulp error (theoretically should be 0, as
0.75 is exactly representable) on GNU libm, with sqrt, 0 ulp error.
Signed-off-by: Ganesh Ajjanagadde <gajjanagadde@gmail.com>
Abstracted into pos_pow34 utility function
Signed-off-by: Claudio Freire <klaussfreire@gmail.com>
src and dst are only 8-bit-aligned, so accessing them as uint16_t causes
SIGBUS crashes on architectures like sparc.
This fixes ubsan runtime error: load of misaligned address for type
'const uint16_t', which requires 2 byte alignment
Reviewed-by: Michael Niedermayer <michael@niedermayer.cc>
Signed-off-by: Andreas Cadhalpun <Andreas.Cadhalpun@googlemail.com>
Fixes out of array read
Fixes: 04442da73d935b776d2236282588d4f9/signal_sigsegv_2625a69_8790_ae85ffc889070663319b3417ede777b0.mov
Found-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
All MDCT outputs must be checked in case of 128point MDCTs
Fixes: out of array read
Fixes: 04442da73d935b776d2236282588d4f9/signal_sigsegv_2625a69_351_52ca6226eb83547a2d26e322ce84ed84.mov
Found-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Fixes runtime error: null pointer passed as argument 2, which is
declared to never be null
Signed-off-by: Andreas Cadhalpun <Andreas.Cadhalpun@googlemail.com>
Signed-off-by: Anton Khirnov <anton@khirnov.net>
This is used to check if the input buffer is larger enough, so if this
overflows it can cause a false negative leading to a segmentation fault
in bytestream2_get_bufferu.
Signed-off-by: Andreas Cadhalpun <Andreas.Cadhalpun@googlemail.com>
Signed-off-by: Anton Khirnov <anton@khirnov.net>
More don't fit into the integer output.
Also use get_bits_long, since get_bits only supports reading up to 25
bits, while get_bits_long supports the full integer range.
Signed-off-by: Andreas Cadhalpun <Andreas.Cadhalpun@googlemail.com>
Signed-off-by: Anton Khirnov <anton@khirnov.net>
Use the ability to invert phase with ms_mask instead of changing
the codebook when possible, to avoid having to switch codebooks
if some bands are INTENSTY_BT and others are INTENSITY_BT2, since
usually a set ms_mask uses less bits that a codebook change. While
it may not always be a win (ie: if it causes an ms_mask bitmap
to be sent when it wouldn't have been otherwise), it's unlikely
since the ms_mask bitmap will almost always be there already for
M/S itself.
The relative error between two encoding strategies is the simple
difference of rate-distortion values, and not the absolute
difference. An absolute measure would allow worsening of the
quantization error as well as improving.
1. Fix sf_idx and band_type addressing to address only the first
subwindow in the group (others could hold garbage values)
2. Don't step on ms_mask when is_mask is set. I/S selection
already sets the ms_mask properly and shouldn't be overridden.
3. Use mid/sid cb/sf when computing coding error, as should be
since those are the cb/sfs that will eventually be set.
4. Fix distortion computation on multi-subwindow groups (was
subtracting the bits terms multiple times)
5. Clear ms_mask when one side uses PNS and the other doesn't.
When using PNS, ms_mask signals correlated noise, which can be
detected just like regular M/S detection, so we don't skip
noise bands, but when only one side uses PNS setting the flag
can confuse some encoders, so avoid that.
Correct addressing of sf_idx and band_type arrays in I/S code.
Both arrays don't guarantee valid values for subwindows at all
times, depending on which coder is being used, which could result
in reading of garbage values. Instead, only the first subwindow
in the window group has to be used, ie: use w*16+g instead of
(w+w2)*16+g
Change the condition for application of the M/S transform to match
that of the decoder. Namely, that no special coding books must be
in use in either channel. While the condition ought to be
equivalent to the current one when the invariant of is_mask is
kept, matching the decoder's condition is safer and easier to
maintain.
Fixes an assertion error reported in #2686 that happens when
using prediction (either explicitly or implicitly by setting
the AAC main profile), since prediction code would allow
creating new zeroes or removing existing ones, without
properly checking for SF delta violations.
This patch forbids creating/removing zeroes, perhaps an
overly conservative approach, but a safe one. More permissive
and sophisticated approaches may be attempted in the future.
Fixes out of array read
Fixes: 03c406ec9530e594a074ce2979f8a1f0/asan_heap-oob_7dec26_4664_37c52495b2870a2eaac65f53958e76c1.flac
Found-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Use av_realloc() rather than av_malloc() when normalizing noncompliant
private data in get_qt_codec().
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
When there is a non-zero decoding delay due to reordering, the first dts
should be lower than the first pts (since the first packet fed to the
decoder does not produce any output).
Use the same scheme used in mpegvideo_enc (which comes from x264
originally) -- wait for first two timestamps and extrapolate linearly to
the past to produce the first dts value.
When B-frames are enabled and the encoder returns success, all currently
pending buffers immediately become valid and can be returned to the
caller. We can only return one packet at a time, so all the other
pending buffers should be transferred to a new 'ready' fifo, from where
they can be returned in subsequent calls (in which the encoder does not
produce any new output). This bug was hidden by the incorrect testing of
the encoder return value (the return value was overwritten before it was
tested).
Fixes assertion failure
Fixes out of memory access
Fixes: test_casex.ivf
Found-by: Tyson Smith <twsmith@mozilla.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Either disabling or init'ing secure memory is required after the use
of gcry_check_version. From a look at the functions rtmpdh uses, I
noticed none require the use of secure memory, so we disable it [1][2].
This resolves some errors returned by rtmpdh code with uninitialized
gcrypt, especifically:
Fatal: failed to create the RNG lock: Invalid argument
FATAL: failed to acquire the FSM lock in libgrypt: Invalid argument
Version "1.5.4" was arbitrarily chosen. An older version probably works
as well, but I couldn't compile older versions to test on my machine.
[1]
https://gnupg.org/documentation/manuals/gcrypt/Initializing-the-library.html
[2]
https://www.gnupg.org/documentation/manuals/gcrypt/Controlling-the-library.html
Signed-off-by: Ricardo Constantino <wiiaboo@gmail.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
The transformation to bytes must happen after alignment to get the same
resulting pointers as before.
This fixes segmentation faults in the assembler code.
The regression was introduced in commit 9553689.
Reviewed-by: Kieran Kunhya <kierank@obe.tv>
Signed-off-by: Andreas Cadhalpun <Andreas.Cadhalpun@googlemail.com>
This exploits an approach based on the sieve of Eratosthenes, a popular
method for generating prime numbers.
Tables are identical to previous ones.
Tested with FATE with/without --enable-hardcoded-tables.
Sample benchmark (Haswell, GNU/Linux+gcc):
prev:
7860100 decicycles in cbrt_tableinit, 1 runs, 0 skips
7777490 decicycles in cbrt_tableinit, 2 runs, 0 skips
[...]
7582339 decicycles in cbrt_tableinit, 256 runs, 0 skips
7563556 decicycles in cbrt_tableinit, 512 runs, 0 skips
new:
2099480 decicycles in cbrt_tableinit, 1 runs, 0 skips
2044470 decicycles in cbrt_tableinit, 2 runs, 0 skips
[...]
1796544 decicycles in cbrt_tableinit, 256 runs, 0 skips
1791631 decicycles in cbrt_tableinit, 512 runs, 0 skips
Both small and large run count given as this is called once so small run
count may give a better picture, small numbers are fairly consistent,
and there is a consistent downward trend from small to large runs,
at which point it stabilizes to a new value.
Reviewed-by: Michael Niedermayer <michael@niedermayer.cc>
Signed-off-by: Ganesh Ajjanagadde <gajjanagadde@gmail.com>
It is used to store the difference between pointers, so ptrdiff_t is the
correct type.
This prevents potential overflows.
Reviewed-by: Michael Niedermayer <michael@niedermayer.cc>
Signed-off-by: Andreas Cadhalpun <Andreas.Cadhalpun@googlemail.com>
This fixes segmentation faults due to out of bounds writes, when
color_start is interpreted as negative number.
This regression was introduced in commit 57631f.
Reviewed-by: Mats Peterson <matsp888@yahoo.com>
Signed-off-by: Andreas Cadhalpun <Andreas.Cadhalpun@googlemail.com>
This patch adds a new static function get_qt_codec() that takes care of
the initial retrieval of the fourcc and codec ID for A_QUICKTIME and
V_QUICKTIME. It also normalizes noncompliant private data found in some
older files that incorrectly starts with the fourcc by expanding/shifting
the data by 4 bytes, and storing the data size at the start. This is
necessary in order for the rest of the code in the A_QUICKTIME and
V_QUICKTIME blocks (and most likely other code as well) to correctly
parse the private data.
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Fixes index out of bounds error
Fixes: aac_index_out_of_bounds.wmv
Found-by: Piotr Bandurski <ami_stuff@o2.pl>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Pass through color range to vp9 encoder. Parse color range in libvpxdec.c.
Reviewed-by: Ronald S. Bultje <rsbultje@gmail.com>
Signed-off-by: Sasi Inguva <isasi@google.com>
Signed-off-by: James Almer <jamrial@gmail.com>
unlike reap_screen(), capture_screen() can be used to populate buffer
without touching the timestamps. this is useful for upcoming commits
which implement a real time caption stream.
This fixes builds with --disable-vfp.
Checking for the armv6 cpu flag is incorrect, since vfpv2 isn't
armv6 specific.
Signed-off-by: Martin Storsjö <martin@martin.st>
moves the screen_changed bit and the bprint_clear into reap_screen() so
the logic is centralized and callers do not need to touch the bit or the
buffer before calling reap_screen()
The function documentation explicitly mentions it needs to be a multiple of 4.
Reviewed-by: Christophe Gisquet <christophe.gisquet@gmail.com>
Signed-off-by: James Almer <jamrial@gmail.com>
In many older QuickTime files, the audio format, or "fourcc", is
0x00000000. The QuickTime File Format Specification states the following
regarding this situation:
"This format descriptor should not be used, but may be found in some
files. Samples are assumed to be stored in either 'raw ' or 'twos'
format, depending on the sample size field in the sound description."
MPlayer handles this logic by itself, but FFmpeg/FFplay currently does
not.
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
In many older QuickTime files, the audio format, or "fourcc", is
0x00000000. The QuickTime File Format Specification states the following
regarding this situation:
"This format descriptor should not be used, but may be found in some
files. Samples are assumed to be stored in either 'raw ' or 'twos'
format, depending on the sample size field in the sound description."
MPlayer handles this logic by itself, but FFmpeg/FFplay currently does
not.
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
In the spirit of commit a956840cbc. Simple method to reproduce:
pass -vstats_file /dev/full to ffmpeg.
All raw fclose usages in ffmpeg.c taken care of here.
Reviewed-by: Michael Niedermayer <michael@niedermayer.cc>
Signed-off-by: Ganesh Ajjanagadde <gajjanagadde@gmail.com>
Use two separate functions, depending on whether VFP/NEON is available.
This is set to require armv5te - it uses blx, which is only available
since armv5t, but we don't have a separate configure item for that.
(It also uses ldrd, which requires armv5te, but this could be avoided
if necessary.)
Signed-off-by: Martin Storsjö <martin@martin.st>
The previous check only caught sizes from -AV_INPUT_BUFFER_PADDING_SIZE
to -1.
This fixes ubsan runtime error: signed integer overflow: 2147483647 + 32
cannot be represented in type 'int'
Signed-off-by: Andreas Cadhalpun <Andreas.Cadhalpun@googlemail.com>
Signed-off-by: Anton Khirnov <anton@khirnov.net>
Both avio_skip and detect_unknown_subobject use int64_t for the size
parameter.
This fixes a segmentation fault due to infinite recursion.
Signed-off-by: Andreas Cadhalpun <Andreas.Cadhalpun@googlemail.com>
Signed-off-by: Alexandra Hájková <alexandra.khirnova@gmail.com>
Signed-off-by: Anton Khirnov <anton@khirnov.net>
Fixes out of array read
Fixes: test_case-mdc.264 (b47be15a120979f5a1a945c938cbef33)
Found-by: Tyson Smith <twsmith@mozilla.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
It serves absolutely no purpose other than to confuse potentional
Android developers about how to use hardware acceleration properly
on the the platform. The stagefright "API" is not public, and the
MediaCodec API is the proper way to do this.
Furthermore, stagefright support in avcodec needs a series of
magic incantations and version-specific stuff, such that
using it actually provides downsides compared just using the actual
Android frameworks properly, in that it is a lot more work and confusion
to get it even running. It also leads to a lot of misinformation, like
these sorts of comments (in [1]) that are absolutely incorrect.
[1] http://stackoverflow.com/a/29362353/3115956
Signed-off-by: Derek Buitenhuis <derek.buitenhuis@gmail.com>
sqrt is faster, and is sometimes more accurate depending on the libm.
Reviewed-by: Paul B Mahol <onemda@gmail.com>
Signed-off-by: Ganesh Ajjanagadde <gajjanagadde@gmail.com>
avio_closep is not guaranteed to succeed, and its return value can
contain information regarding failure of preceding writes and silent
loss of data (man 2 close, man fclose). Users should know when the
progress was not successfully logged, and so a diagnostic is printed
here.
Reviewed-by: Michael Niedermayer <michael@niedermayer.cc>
Reviewed-by: James Almer <jamrial@gmail.com>
Signed-off-by: Ganesh Ajjanagadde <gajjanagadde@gmail.com>
The previous check only caught sizes from -AV_INPUT_BUFFER_PADDING_SIZE
to -1.
This fixes ubsan runtime error: signed integer overflow: 2147483647 + 32
cannot be represented in type 'int'
Reviewed-by: Michael Niedermayer <michael@niedermayer.cc>
Signed-off-by: Andreas Cadhalpun <Andreas.Cadhalpun@googlemail.com>
This fixes NULL pointer dereferencing if the codec is forced to
adpcm_thp even though a different one was detected.
Reviewed-by: Paul B Mahol <onemda@gmail.com>
Signed-off-by: Andreas Cadhalpun <Andreas.Cadhalpun@googlemail.com>
This causes non-unique elements in floor_setup->data.t1.list, which
makes the stream undecodable according to the specification.
Reviewed-by: Michael Niedermayer <michael@niedermayer.cc>
Signed-off-by: Andreas Cadhalpun <Andreas.Cadhalpun@googlemail.com>
* commit '3b6473b43eb69fc3faaf69f7fd0b83b51db7607f':
qsvdec: properly handle the warning from MFXVideoCORE_SyncOperation
Merged-by: Hendrik Leppkes <h.leppkes@gmail.com>
* commit '9d74012761bc3ee676fe43321d5699e4877fde5b':
h264: improve behaviour with invalid reference lists
Not merged, as we have a different solution.
Merged-by: Hendrik Leppkes <h.leppkes@gmail.com>
The QuickTime File Format Specification states the following:
"Depth: A 16-bit integer that indicates the pixel depth of the
compressed image. Values of 1, 2, 4, 8 ,16, 24, and 32 indicate the
depth of color images. The value 32 should be used only if the image
contains an alpha channel. Values of 34, 36, and 40 indicate 2-, 4-, and
8-bit grayscale, respectively, for grayscale images."
There is no mention of value 33, i.e. 1-bit video (0x01) with the
greyscale bit (0x20) set. I therefore suggest that we ignore the
greyscale bit when processing 1-bit video. Another reason to do this is
that the first 1-bit sample file below will be displayed properly with
blue colors in QuickTime in Windows or Mac *in spite of* the greyscale
bit being set.
Also, QuickTime in Windows or Mac ignores the greyscale bit if the
video sample description contains a palette, regardless of bit depth.
This is undocumented behaviour, but I think we should do the same, and
it seems pretty logical after all, since one wouldn't really bother
putting a customized palette into a grayscale file anyway. See the
second 8-bit sample file below, which has the greyscale bit set, and
which contains a palette in the video sample description. In Windows or
Mac, it will be displayed with the palette in the sample description, in
spite of the greyscale bit being set.
Sample file 1 (1-bit QuickTime Animation):
https://drive.google.com/open?id=0B3_pEBoLs0faTThSek1EeXQ0ZHM
Earth Spin 1-bit qtrle orig.mov
Sample file 2 (8-bit QuickTime Animation):
https://drive.google.com/open?id=0B3_pEBoLs0fad2s0V1YzUWo5aDA
quiz-palette+gs.mov
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
This commit fixes the lack of palettized display of 1-bit video
in the qtrle decoder. It is related to my commit of
lavf/qtpalette, which added 1-bit video to the "palettized video"
category. As far as I can see, everything works fine, but comments are
of course welcome.
Below are links to sample files, which should now be displayed properly
with bluish colors, but which were previously displayed in black &
white.
Matroska:
https://drive.google.com/open?id=0B3_pEBoLs0faNjI0cHBMWDhYY2c
Earth Spin 1-bit qtrle.mkv
QuickTime (mov):
https://drive.google.com/open?id=0B3_pEBoLs0faUlItWm9KaGJSTEE
Earth Spin 1-bit qtrle.mov
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
It causes the angle channel number to equal the magnitude channel
number, which makes the stream undecodable according to the
specification.
Reviewed-by: Michael Niedermayer <michael@niedermayer.cc>
Signed-off-by: Andreas Cadhalpun <Andreas.Cadhalpun@googlemail.com>
This preempts potential bugs if this is changed and the indention
ends up different from C interpretation
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
This fixes ubsan runtime error: left shift by 8 places cannot be
represented in type 'int'
Reviewed-by: Michael Niedermayer <michael@niedermayer.cc>
Signed-off-by: Andreas Cadhalpun <Andreas.Cadhalpun@googlemail.com>
This causes a overall slowdown of 0.1 % (tested with mpeg4 single thread encoding of matrixbench at QP=3)
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
* commit '8563f9887194b07c972c3475d6b51592d77f73f7':
x86: use emms after ff_int32_to_float_fmul_scalar_sse
Merged-by: Hendrik Leppkes <h.leppkes@gmail.com>
* commit 'f4f27e4cf1013c55b2c7df359ce8d58ee922662c':
x86: zero extend the 32-bit length in int32_to_float_fmul_scalar implicitly
Merged-by: Hendrik Leppkes <h.leppkes@gmail.com>
* commit '69a68593ce5684409c3c4dd9a901bfd8b16925b1':
Remove stray line breaks from avpriv_{report_missing_feature|request_samples}
Merged-by: Hendrik Leppkes <h.leppkes@gmail.com>
* commit '2008f76054906e9ff6bf744800af0e5a5bfe61be':
dca: remove unused decode_hf function and quant_d tables
Merged-by: Hendrik Leppkes <h.leppkes@gmail.com>
* commit 'aebf07075f4244caf591a3af71e5872fe314e87b':
dca: change the core to work with integer coefficients.
Merged-by: Hendrik Leppkes <h.leppkes@gmail.com>
Also use a unsigned constant for the shift calculation, as 1 << 31 is
undefined for int32_t. This is also fixed oggparsetheora.
This fixes ubsan runtime error: shift exponent is too large for
32-bit type 'int'
Reviewed-by: Michael Niedermayer <michael@niedermayer.cc>
Signed-off-by: Andreas Cadhalpun <Andreas.Cadhalpun@googlemail.com>
* commit '711781d7a1714ea4eb0217eb1ba04811978c43d1':
x86: checkasm: check for or handle missing cleanup after MMX instructions
Merged-by: Hendrik Leppkes <h.leppkes@gmail.com>
* commit 'cc29d96d5a379dbcf2649947d884c202c2a52767':
arm64: fix inverted register order in transpose_4x4H
Merged-by: Hendrik Leppkes <h.leppkes@gmail.com>
* commit '50078c1c8070dd8d1c329e8117ff30ec72489039':
libavutil: move FFALIGN macro from common.h to macros.h
Merged-by: Hendrik Leppkes <h.leppkes@gmail.com>
* commit 'dbce017913ce04966021a2f72e4f8fae5b4b7190':
mpegtsenc: add flag to embed an AC-3 ES the DVB way
Merged-by: Hendrik Leppkes <h.leppkes@gmail.com>
* commit 'cc4c24208159200b7aff5b5c313903c7f23fa345':
avresample: Mark avresample_buffer() as pointer to const
Merged-by: Hendrik Leppkes <h.leppkes@gmail.com>
ff_clz is faster, and uses an intrinsic (at the moment on GCC). exp2 is
a wasteful function for a simple integer exponentiation.
Untested.
Reviewed-by: Paul B Mahol <onemda@gmail.com>
Signed-off-by: Ganesh Ajjanagadde <gajjanagadde@gmail.com>
Fixes Ticket #5032
The samples in Ticket #5032 is using \r\r\n as line breaks. Since we
already are handling \r, or \n, or \r\n as line breaks, \r\n\n will be
considered as a double line breaks. This is an issue because
ff_subtitles_read_text_chunk() will as a result stop extracting a chunk
after just one line.
So instead of parsing the SRT by "chunks" (which means splitting every
double LB), this new parser is detecting timing lines, and split the
events on this basis. While this sounds safe and simple, it needs to
take into account the event number preceding the timing line while
handling situations such as:
- event number starting at 0 or actually any number instead of 1
- event numbers not being ordered at all
- event number being followed by text garbage (this really happened,
see Ticket #4898)
- event payload containing one or multiple number (a protagonist saying
a count-down, a date or whatever) which could be confused with a
chapter number
- event number being empty (see Ticket #2167)
- all kind of weird line breaks can appear randomly like wild pokémons
- untrustable line breaks (Ticket #5032)
The sample madness.srt tries to sum up most of this into one sample,
ticket5032-rrn.srt is the file containing \r\r\n line breaks. and
empty-events-2167.srt contains empty events.
* commit '64f8c439fd663fec4d57ac21af572d498fe21f7a':
rtmpproto: Include the full path as app when "slist=" is found
Merged-by: Hendrik Leppkes <h.leppkes@gmail.com>
* commit '9f0b6e6827e21e3477abe1199dc2728e30b8c061':
vocdec: do not create the stream in read_header()
Not merged as it breaks FATE.
Merged-by: Hendrik Leppkes <h.leppkes@gmail.com>
* commit '2d0432d918a71468419b7ac1e543ab3b399d3d37':
vocdec: put the code not shared with other demuxers under appropriate ifdef
Merged-by: Hendrik Leppkes <h.leppkes@gmail.com>
* commit '09ae7b81ea2051eec2be9964296bd6ef492c6622':
flvdec: do not create any streams in read_header()
Not merged. The demuxer issues warnings when a new stream is encountered
and reading the metadata requires that streams already exist.
Merged-by: Hendrik Leppkes <h.leppkes@gmail.com>
This unbreaks muxing-encoding
Example:
ffmpeg -i matrixbench_mpeg2.mpg new.avi
-rw-r----- 1 michael michael 226035354 Jan 1 16:27 new.avi
-rw-r----- 1 michael michael 10016802 Jan 1 16:28 ref.avi
Also av_get_audio_frame_duration() itself uses frame_size
This reverts commit 29e6606e9b, reversing
changes made to 53448461a7.
* commit 'de9e199a039473ebe4b1b87382e3064d0ea2cf02':
lavc: make avpriv_mpa_decode_header private on next bump
Merged-by: Hendrik Leppkes <h.leppkes@gmail.com>
* commit '955aec3c7c7be39b659197e1ec379a09f2b7c41c':
mpegaudiodecheader: check the header in avpriv_mpegaudio_decode_header
Merged-by: Hendrik Leppkes <h.leppkes@gmail.com>
* commit 'cea1eef25c3310a68dd327eb74aae14ad3c2ddef':
lavc: get the profile name through the codec descriptor in avcodec_string()
Merged-by: Hendrik Leppkes <h.leppkes@gmail.com>
Before 741b494fa8, when the reference list
modification description was invalid, the code would substitute the
corresponding reference from the initial ("default") reference list.
After that commit, it will just return an error.
Since there are apparently invalid samples in the wild that used to play
fine with the old code, it is a good idea to re-add some sort of error
resilience here. So, when the reference list modification results in a
missing frame, substitute a previous reference frame for it. The
relevant sample again decodes fine with the same output as previously.
* commit 'cdc9ce098e8d101b43b8f68dd35ba7226f4a728c':
lavc: print the name of the codec, not its implementation, in avcodec_string
FFmpeg has already done this.
Merged-by: Hendrik Leppkes <h.leppkes@gmail.com>
* commit '6bf4c1d71199b92894f24db6386ed5070e590a16':
r3d: do not create the audio stream until we know the sample rate
Merged-by: Hendrik Leppkes <h.leppkes@gmail.com>
* commit '9f1eccb97bf8894cb18b14f642500686505ef186':
ff_parse_specific_params: do not use AVCodecContext.frame_size
Merged-by: Hendrik Leppkes <h.leppkes@gmail.com>
This can happen if s->ls changes from 0 to 1, but picture allocation is
skipped due to s->interlaced.
In that case ff_jpegls_decode_picture could be called even though the
s->picture_ptr frame has the wrong pixel format and thus a wrong
linesize, which results in a too small zero buffer being allocated.
This fixes an out-of-bounds read in ls_decode_line.
Reviewed-by: Michael Niedermayer <michael@niedermayer.cc>
Signed-off-by: Andreas Cadhalpun <Andreas.Cadhalpun@googlemail.com>
support reading encrypted mp4 using aes-ctr, conforming to ISO/IEC
23001-7.
a new parameter was added:
- decryption_key - 128 bit decryption key (hex)
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Commit b272c3a5aa has sped up dsd_tablegen, and now table generation takes
~ 40k cycles. Thus, these tables can always be generated at runtime.
Tested with/without --enable-hardcoded-tables.
Signed-off-by: Ganesh Ajjanagadde <gajjanagadde@gmail.com>
Prevents that following scalers in the filter chain will do unintentional color range conversions.
Fixes Ticket #5096
Signed-off-by: Thomas Mundt <loudmax@yahoo.de>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Let's disable the ISAs first, and then the core capabilities, as we do
for the rest of the cores. This way the code is better organized.
Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Tables are bit identical.
Sample benchmark (Haswell, GNU/Linux+gcc):
old:
814485 decicycles in dsd_ctables_tableinit, 512 runs, 0 skips
new:
356808 decicycles in dsd_ctable_tableinit, 512 runs, 0 skips
Binary size should essentially be identical, and is in fact identical on
the configuration I tested on.
Reviewed-by: Michael Niedermayer <michael@niedermayer.cc>
Signed-off-by: Ganesh Ajjanagadde <gajjanagadde@gmail.com>
Intel's Instruction Set Reference (as of September 2015) clearly states
that cvtpi2ps switches to MMX state. Actual CPUs do not switch if the
source is a memory location. The Instruction Set Reference from 1999
(Order Number 243191) describes this behaviour but all later versions
I've seen have make no distinction whether MMX registers or memory is
used as source.
The documentation for the matching SSE2 instruction to convert to double
(cvtpi2pd) was fixed (see the valgrind bug
https://bugs.kde.org/show_bug.cgi?id=210264).
It will take time to get a clarification and fixes in place. In the
meantime it makes sense to change ff_int32_to_float_fmul_scalar_sse to
be correct according to the documentation. The vast majority of users
will have SSE2 so a change to the SSE version has little effect.
Fixes fate-checkasm on x86 valgrind targets.
Valgrind 'bug' reported as https://bugs.kde.org/show_bug.cgi?id=357059
These are just for prefixes and may be hardcoded easily; see lavu/eval
for this approach.
Reviewed-by: Stefano Sabatini <stefasab@gmail.com>
Signed-off-by: Ganesh Ajjanagadde <gajjanagadde@gmail.com>
This commit for qtpalette.c and qtpalette.h adds 1-bit video to the
"palettized video" category, since if the video sample description
contains a palette, the two colors in the palette can be any color, not
necessarily black & white.
Unfortunately, I've noticed that the qtrle (QuickTime Animation) decoder
blindly assumes that 1-bit video is black & white. I don't have enough
knowledge about the decoder to fix this, though.
Below is a link to a sample 1-bit QuickTime Animation clip of a rotating
earth that uses blueish colors, and they will be correctly rendered in
QuickTime, but not in FFmpeg (which will use black & white).
https://drive.google.com/open?id=0B3_pEBoLs0faUlItWm9KaGJSTEE
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
get_ue_golomb() cannot decode values larger than 8190 (the maximum
value that can be golomb encoded in 25 bits) and produces the error
"Invalid UE golomb code" if a larger value is encountered. Use
get_ue_golomb_long() instead (which supports 63 bits, up to 4294967294)
when valid h264/hevc values can exceed 8190.
This updates decoding of the following values: (maximum)
first_mb_in_slice 36863* for level 5.2
abs_diff_pic_num_minus1 131071
difference_of_pic_nums_minus1 131071
idr_pic_id 65535
recovery_frame_cnt 65535
frame_packing_arrangement_id 4294967294
frame_packing_arrangement_repetition_period 16384
display_orientation_repetition_period 16384
An alternative would be to modify get_ue_golomb() to handle encoded
values of up to 49 bits as was done for get_se_golomb() in a92816c.
In that case get_ue_golomb() could continue to be used for all of
these except frame_packing_arrangement_id.
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Check the full FPU tag word instead of only the lower half and simplify
the comparison.
Use upper-case function base name as macro name to instantiate both
checked_call variants.
Replaces by real arithmetic. Tested the validity of these transformations separately.
Numerical differences are ~1e-15, and should not matter: it is not even
clear which is more precise mathematically.
Reviewed-by: Paul B Mahol <onemda@gmail.com>
Signed-off-by: Ganesh Ajjanagadde <gajjanagadde@gmail.com>
Previosly output was almost useless because background noise, due to
windowing function picked and which is not actually present in audio,
had too much brightness.
Now output of sine wave matches more with SoX.
Signed-off-by: Paul B Mahol <onemda@gmail.com>
This solves the problem discussed in https://ffmpeg.org/pipermail/ffmpeg-devel/2015-September/179238.html
by allowing AVCodec::write_header to be delayed until after packets have been
run through required bitstream filters in order to generate global extradata.
It also provides a mechanism by which a muxer can add a bitstream filter to a
stream automatically, rather than prompting the user to do so.
Revert requested by Balint Marton <cus@passwd.hu>
See: [FFmpeg-devel] ffplay: insertion point of the auto rotation filter - Github ticket #141
This reverts commit 9cc1e644f3.
Palettized QuickTime video in Matroska has hitherto not been recognized
whatsoever, and the "palette" used has been completely random.
The patch for matroskadec.c fixes this issue by adding a palette side
data packet in matroska_deliver_packet(), much in the same way as it's
done in mov.c.
Video samples for testing are available at
https://drive.google.com/open?id=0B3_pEBoLs0faWElmM2FnLTZYNlk.
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
This consists mainly of moving the palette handling from
the mov_parse_stsd_video() function to a new ff_get_qtpalette() function
in the new file qtpalette.c, which will be shared by both matroskadec.c and
mov.c.
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Previous "currently size is limited" didn't give away
much in terms of useful info.
Signed-off-by: Reynaldo H. Verdejo Pinochet <reynaldo@osg.samsung.com>
Fixes weirdness like our "??filename? not found" 404.
None of the chars being used from the previously blacklisted
list needs to be scaped on an UTF-8 document context
Signed-off-by: Reynaldo H. Verdejo Pinochet <reynaldo@osg.samsung.com>
Should fix the regression, and also speeds up table generation.
Tables tested on GNU/Linux+clang: they are identical to the ones prior
to 5495c7f. ff_exp10 caused one slight change in one entry, 50000 became
50001 due to somewhat incorrect rounding.
Untested on ICC; passes FATE on GNU/Linux+gcc.
Signed-off-by: Ganesh Ajjanagadde <gajjanagadde@gmail.com>
avoids the float to integer cast, and is slightly superior in terms of
rounding ("Dutch/Gauss rounding").
Reviewed-by: Ronald S. Bultje <rsbultje@gmail.com>
Signed-off-by: Ganesh Ajjanagadde <gajjanagadde@gmail.com>
Fast, reasonably accurate 10^x. Alternative of detection of libm exp10 at configure
time is not worth the trouble, since it is anyway not POSIX or ISO C,
and currently only the GNU libm has it. Furthermore, GNU libm's variant
is ~ 2x slower, and is ironically not correctly rounded (2 ulp off) to justify all
that slowdown.
Reviewed-by: James Almer <jamrial@gmail.com>
Reviewed-by: Hendrik Leppkes <h.leppkes@gmail.com>
Reviewed-by: Michael Niedermayer <michael@niedermayer.cc>
Signed-off-by: Ganesh Ajjanagadde <gajjanagadde@gmail.com>
Addition of comments marking the end of ifdef blocks, correction of an
incorrect (at double precision) M_LN2, removal of an unnecessary undef.
Signed-off-by: Ganesh Ajjanagadde <gajjanagadde@gmail.com>
So far an AC-3 elementary stream is refered to in the PMT according to
System A (ATSC). An E-AC-3 ES in contrast is embedded the System B (DVB) way.
To fix this inconsistency, this commit changes the default E-AC-3 behaviour to
use the ATSC way, too. Furthermore a new flag is added to optionally select the
DVB way (regarding both codecs and possible further differences in the future).
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
exp10 is a function available in GNU libm. Looks like no other common
libm has it. This adds support for it to FFmpeg.
There are essentially 2 ways of handling the fallback:
1. Using pow(10, x)
2. Using exp2(M_LOG2_10 * x).
First one represents a Pareto improvement, with no speed or accuracy
regression anywhere, but speed improvement limited to GNU libm.
Second one represents a slight accuracy loss (relative error ~ 1e-13)
for non GNU libm. Speedup of > 2x is obtained on non GNU libm platforms,
~30% on GNU libm. These are "average case numbers", another benefit is
the lack of triggering of the well-known terrible worst case paths
through pow.
Based on reviews, second one chosen. Comment added accordingly.
Reviewed-by: Hendrik Leppkes <h.leppkes@gmail.com>
Reviewed-by: Michael Niedermayer <michael@niedermayer.cc>
Reviewed-by: Ronald S. Bultje <rsbultje@gmail.com>
Signed-off-by: Ganesh Ajjanagadde <gajjanagadde@gmail.com>
complex is not available on all platforms. Furthermore, it is trivial to
rewrite complex number expressions to real arithmetic, and in fact
sometimes advantageous for performance reasons: by wrapping as a complex,
one forces a particular Cartesian representation that is not necessarily optimal for the purpose.
Configure dependencies also removed, and aemphasis is now available across
all platforms.
Reviewed-by: Paul B Mahol <onemda@gmail.com>
Signed-off-by: Ganesh Ajjanagadde <gajjanagadde@gmail.com>
Fixes a specific srt sample, which has an event with negative duration.
libavcodec will convert an event with negative duration to an ASS event
which will be displayed forever, which is not wanted here.
Treat negative duration always as unknown duration instead, and show it
until the next subtitle event.
The DCA core decoder converts integer coefficients read from the
bitstream to floats just after reading them (along with dequantization).
All the other steps of the audio reconstruction are done with floats
which makes the output for the DTS lossless extension (XLL)
actually lossy.
This patch changes the DCA core to work with integer coefficients
until QMF. At this point the integer coefficients are converted to floats.
The coefficients for the LFE channel (lfe_data) are not touched.
This is the first step for the really lossless XLL decoding.
A negative bits_per_coded_sample doesn't make sense.
If it is too large, the size calculation for av_get_packet overflows,
resulting in allocation of a too small buffer.
Also make sure width and height are sane.
Reviewed-by: Michael Niedermayer <michael@niedermayer.cc>
Signed-off-by: Andreas Cadhalpun <Andreas.Cadhalpun@googlemail.com>
Instead of calling the input filter request_frame() method,
ff_request_frame() now marks the link and returns immediately.
buffersink is changed to activate the marked filters until
a frame is obtained.
The status field can carry any error code instead of just EOF.
Also only update it through a wrapper function and provide a timestamp.
Update the few filters that used it directly.
Applications are not supposed to mess with links,
they should close the sinks.
Furthermore, this function does not distinguish what end
of the link caused the close and does not have a timestamp.
This field is used for fast comparison between link ages,
it is in AV_TIME_BASE units, in other words microseconds,
µs =~ us.
Renaming it allows a second field in link time base units.
Fix possible SF delta violation that would cause an
eventual assertion failure in some corner cases (esp
on very low bitrates) when marking bands for PNS due
to misuse of the sf_delta utilities
'erf' is far from the best name for a variable and is not very
descriptive since the actual variable points to the comparitively best
IS phase. Therefore rename it to 'best'.
Signed-off-by: Rostislav Pehlivanov <atomnuker@gmail.com>
Source code is from Boost:
http://www.boost.org/doc/libs/1_46_1/boost/math/special_functions/erf.hpp
with appropriate modifications for FFmpeg.
Tested on interval -6 to 6 (beyond which it saturates), +/-NAN, +/-INFINITY
under -fsanitize=undefined on clang to test for possible undefined behavior.
This function turns out to actually be essentially as accurate and faster than the
libm (GNU/BSD's/Mac OS X), and I can think of 3 reasons why upstream
does not use this:
1. They are not aware of it.
2. They are concerned about licensing - this applies especially to GNU
libm.
3. They do not know and/or appreciate the benefits of rational
approximations over polynomial approximations. Boost uses them to great
effect, see e.g swr/resample for bessel derived from them, which is also
similarly superior to libm variants.
First, performance.
sample benchmark (clang -O3, Haswell, GNU/Linux):
3e8 values evenly spaced from 0 to 6
time (libm):
./test 13.39s user 0.00s system 100% cpu 13.376 total
time (boost based):
./test 9.20s user 0.00s system 100% cpu 9.190 total
Second, accuracy.
1e8 eval pts from 0 to 6
maxdiff (absolute): 2.2204460492503131e-16
occuring at point where libm erf is correctly rounded, this is not.
Illustration of superior rounding of this function:
arg : 0.83999999999999997
erf : 0.76514271145499457
boost : 0.76514271145499446
real : 0.76514271145499446
i.e libm is actually incorrectly rounded. Note that this is clear from:
https://github.com/JuliaLang/openlibm/blob/master/src/s_erf.c (the Sun
implementation used by both BSD and GNU libm's), where only 1 ulp is
guaranteed.
Reasons it is not easy/worthwhile to create a "correctly rounded"
variant of this function (i.e 0.5ulp):
1. Upstream libm's don't do it anyway, so we can't guarantee this unless
we force this implementation on all platforms. This is not easy, as the
linker would complain unless measures are taken.
2. Nothing in FFmpeg cares or can care about such things, due to the
above and FFmpeg's nature.
3. Creating a correctly rounded function will in practice need some use of long
double/fma. long double, although C89/C90, unfortunately has problems on
ppc. This needs fixing of toolchain flags/configure. In any case this
will be slower for miniscule gain.
Reviewed-by: James Almer <jamrial@gmail.com>
Signed-off-by: Ganesh Ajjanagadde <gajjanagadde@gmail.com>
Not every asm routine is expected clear the MMX state after returning.
It is however a requisite for testing floating point code in checkasm.
Annotate functions requiring cleanup with declare_func_emms() and issue
emms after the call. The remaining functions are checked for having a
cleared MMX state after return.
Here it is mostly a cosmetic change, but there might be benefits in that
there are no compat hacks for lround, while there are for lrint.
Signed-off-by: Ganesh Ajjanagadde <gajjanagadde@gmail.com>
lrint avoids an implicit cast, and is not slower on non-broken libm's. Thus this
represents a Pareto improvement.
Signed-off-by: Ganesh Ajjanagadde <gajjanagadde@gmail.com>
lrint is faster here on -ftree-vectorize with GCC. This is likely simply
an artifact of GCC's rather terrible auto-vectorizer, since as per the
instruction set manuals cvtsd2si and cvttsd2si (or their vector equivalents)
have identical cycle timings.
Anyway, regardless of above, lrint is superior to round accuracy wise.
Safety guaranteed as long int has at least 32 bits.
Signed-off-by: Ganesh Ajjanagadde <gajjanagadde@gmail.com>
Otherwise the too small buffer is directly used in the frame, causing
segmentation faults, when trying to use the frame.
Reviewed-by: Michael Niedermayer <michael@niedermayer.cc>
Signed-off-by: Andreas Cadhalpun <Andreas.Cadhalpun@googlemail.com>
For systems with broken libms.
Tested with NAN, -NAN, INFINITY, -INFINITY, +/-x for regular double x and
combinations of these.
Old versions of MSVC need some UINT64_C hackery.
Reviewed-by: Ronald S. Bultje <rsbultje@gmail.com>
Reviewed-by: Hendrik Leppkes <h.leppkes@gmail.com>
Signed-off-by: Ganesh Ajjanagadde <gajjanagadde@gmail.com>
lrint is faster and conveys the intent better here. It is safe as long int has
at least 32 bits.
Reviewed-by: Michael Niedermayer <michael@niedermayer.cc>
Signed-off-by: Ganesh Ajjanagadde <gajjanagadde@gmail.com>
If it is negative, it can cause the byte position to move backwards in
avio_skip, which in turn makes sm_size negative and thus size larger
than the size of the packet buffer, causing invalid writes in avio_read.
Also fix potential overflow of avio_tell(bc) + value_len.
Reviewed-by: Michael Niedermayer <michael@niedermayer.cc>
Signed-off-by: Andreas Cadhalpun <Andreas.Cadhalpun@googlemail.com>
This is used to check if the input buffer is large enough, so if this
overflows it can cause a false negative leading to a segmentation fault
in bytestream2_get_bufferu.
Reviewed-by: Michael Niedermayer <michael@niedermayer.cc>
Signed-off-by: Andreas Cadhalpun <Andreas.Cadhalpun@googlemail.com>
Fixes ubsan runtime error: null pointer passed as argument 2, which is
declared to never be null
Reviewed-by: Michael Niedermayer <michael@niedermayer.cc>
Signed-off-by: Andreas Cadhalpun <Andreas.Cadhalpun@googlemail.com>
* Avoid excesive nesting that made it really hard to follow
* Drop unneeded vars
* Factor out codec compatibility check routine
* Ensure inputs are closed and contexts are freed as needed
before returning
Signed-off-by: Reynaldo H. Verdejo Pinochet <reynaldo@osg.samsung.com>
Exit from main on build_feed_streams() failures & use
standard EXIT_ codes on error out/normal exit.
Signed-off-by: Reynaldo H. Verdejo Pinochet <reynaldo@osg.samsung.com>
Fix related register order issue in ff_h264_idct_add_neon.
Found-by: zjh8890 <243186085@qq.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
In the code we keep using logo_x2-1 and logo_y2-1 rather than logo_x2
and logo_y2 themselves. Define them to be what we need instead, to avoid
the repeated subtractions.
Signed-off-by: Jean Delvare <jdelvare@suse.de>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Since the parser was merged back almost 2 months ago this is the first
time the bitstream of the container has been updated.
Signed-off-by: Rostislav Pehlivanov <atomnuker@gmail.com>
This macro unconditionally used out[-1], which causes an out of bounds
read, if out is the very beginning of the buffer.
Signed-off-by: Andreas Cadhalpun <Andreas.Cadhalpun@googlemail.com>
More don't fit into the integer output.
Also use get_bits_long, since get_bits only supports reading up to 25
bits, while get_bits_long supports the full integer range.
Reviewed-by: Michael Niedermayer <michael@niedermayer.cc>
Signed-off-by: Andreas Cadhalpun <Andreas.Cadhalpun@googlemail.com>
The type of last_frame_pb_count was chosen to be an int since overflow
is impossible (the spec says the maximum bits per frame is 6144 per
channel and the encoder checks for that).
Signed-off-by: Rostislav Pehlivanov <atomnuker@gmail.com>
Reviewed-by: Paul B Mahol <onemda@gmail.com>
* commit '458e53f51fc75d08df884f8e9eb3d7ded23e97b3':
mpegvideo_enc: actually add the side data with vbv_delay to the packet
Merged-by: Hendrik Leppkes <h.leppkes@gmail.com>
* commit '81c95eb8eee856d98d4ac37367dbc761f2faf875':
openh264: Directly include the deprecation guards header
Merged-by: Hendrik Leppkes <h.leppkes@gmail.com>
* commit 'c34df422628e6b7b657faee241fe7bb2629e0f57':
sgienc: Make sure to initialize skipped header portions
Merged-by: Hendrik Leppkes <h.leppkes@gmail.com>
exp2 is faster.
It may be possible to optimize further; e.g the exponents seem to be
multiples of 0.25. This requires study though.
Reviewed-by: Paul B Mahol <onemda@gmail.com>
Signed-off-by: Ganesh Ajjanagadde <gajjanagadde@gmail.com>
If that is the case, the loop setting predictor_state in
sonic_decode_frame causes out of bounds reads of int_samples, which has
only frame_size number of elements.
Reviewed-by: Michael Niedermayer <michael@niedermayer.cc>
Signed-off-by: Andreas Cadhalpun <Andreas.Cadhalpun@googlemail.com>
exp2 suffices here. Some trivial speedup is done in addition here by
reusing results.
This retains accuracy, and in particular results in identical values
with GNU libm + gcc/clang.
sample benchmark (Haswell, GNU/Linux):
proposed : 424160 decicycles in pow_table, 512 runs, 0 skips
exp2 only: 1262093 decicycles in pow_table, 512 runs, 0 skips
old : 2849085 decicycles in pow_table, 512 runs, 0 skips
Reviewed-by: Michael Niedermayer <michael@niedermayer.cc>
Signed-off-by: Ganesh Ajjanagadde <gajjanagadde@gmail.com>
arc4random() was designed as a superior interface for system random
number generation, designed for OpenBSD and subsequently incorporated by
other BSD's, Mac OS X, and some non-standard libc's. It is thus an improvement to
use it whenever available.
As a side note, this may or may not get included in glibc, and there is
a proposal to create a posix_random family based on these ideas:
http://austingroupbugs.net/view.php?id=859.
Tested on Mac OS X.
Signed-off-by: Ganesh Ajjanagadde <gajjanagadde@gmail.com>
* commit 'f1ccd076801444ab7f524cb13e0886faaf10fd50':
h264: do not call frame_start() for missing frames
Not merged, FFmpeg does a lot more in frame_start to setup missing frames
as well (like coloring them), and the overhead of the other setup is
minimal.
Merged-by: Hendrik Leppkes <h.leppkes@gmail.com>
* commit 'd5f5c90be9ec120f1320dcdd808b7bd917dee47c':
rtsp: free opts dictionary on failure of getnameinfo
Merged-by: Hendrik Leppkes <h.leppkes@gmail.com>
* commit 'e02de9df4b218bd6e1e927b67fd4075741545688':
lavc: export Dirac parsing API used by the ogg demuxer as public
Merged-by: Hendrik Leppkes <h.leppkes@gmail.com>
* commit 'f0b769c16daafa64720dcba7fa81a9f5255e1d29':
lavc: add a packet side data type for VBV-like parameters
Merged-by: Hendrik Leppkes <h.leppkes@gmail.com>
* commit 'e63e3797a1ed9346f529848e6ba3d27fd2d2cc8d':
avconv: pass the global codec side data to the muxer
Merged-by: Hendrik Leppkes <h.leppkes@gmail.com>
* commit '31c51f7441de07b88cfea2550245bf1f5140cb8f':
avpacket: add a function for wrapping existing data as side data
Merged-by: Hendrik Leppkes <h.leppkes@gmail.com>
* commit 'b09ad37c83841c399abb7f2503a2ab214d0c2d48':
h264: derive the delay from the level when it's not present
Merged without changing the strict_std_compliance check, as it breaks FATE
and changes decoding behavior.
Merged-by: Hendrik Leppkes <h.leppkes@gmail.com>
* commit '792b9c9dfcf44b657d7854368d975b5ca3bc22ca':
h264: set frame_num in start_frame(), not decode_slice_header()
Merged-by: Hendrik Leppkes <h.leppkes@gmail.com>
This adds a computation of the progress speed versus realtime ("Nx")
to the status line and to the report log. It uses the progress time
as already calculated for total output time as a base.
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
This macro unconditionally used out[-1], which causes an out of bounds
read, if out is the very beginning of the buffer.
Signed-off-by: Andreas Cadhalpun <Andreas.Cadhalpun@googlemail.com>
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
Due to this typo max_center can be too large, causing nlsf to be set to
too large values, which in turn can cause nlsf[i - 1] + min_delta[i] to
overflow to a negative value, which is not allowed for nlsf and can
cause an out of bounds read in silk_lsf2lpc.
Signed-off-by: Andreas Cadhalpun <Andreas.Cadhalpun@googlemail.com>
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
Due to this typo max_center can be too large, causing nlsf to be set to
too large values, which in turn can cause nlsf[i - 1] + min_delta[i] to
overflow to a negative value, which is not allowed for nlsf and can
cause an out of bounds read in silk_lsf2lpc.
Reviewed-by: Michael Niedermayer <michael@niedermayer.cc>
Signed-off-by: Andreas Cadhalpun <Andreas.Cadhalpun@googlemail.com>
These postfixes can be computed statically, and there is no need to
waste runtime resources.
Tested with FATE.
Reviewed-by: Michael Niedermayer <michael@niedermayer.cc>
Signed-off-by: Ganesh Ajjanagadde <gajjanagadde@gmail.com>
A negative codec_id cannot be handled by the found_decoder API of
AVStream->info: if the codec_id is not recognized, found_decoder is set
to -codec_id, which has to be '<0' according to the API documentation.
This can cause NULL pointer dereferencing in try_decode_frame.
Also make sure the codec_type matches the expected one for codec_id.
Reviewed-by: Michael Niedermayer <michael@niedermayer.cc>
Signed-off-by: Andreas Cadhalpun <Andreas.Cadhalpun@googlemail.com>
support writing encrypted mp4 using aes-ctr, conforming to ISO/IEC
23001-7.
3 new parameters were added:
- encryption_scheme - allowed values are none (default) and cenc-aes-ctr
- encryption_key - 128 bit encryption key (hex)
- encryption_kid - 128 bit encryption key identifier (hex)
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
* commit 'e7078e842d93436edba1f30af1f9869d3913f7fe':
hevcdsp: add x86 SIMD for MC
Not merged, FFmpeg HEVC DSP has diverged substantially from Libav.
Merged-by: Hendrik Leppkes <h.leppkes@gmail.com>
* commit '0cef06df073934ca08d0357fcbbbcf2bc9b2a0cd':
checkasm: add HEVC MC tests
Not merged, FFmpeg HEVC DSP has diverged substantially from Libav.
Merged-by: Hendrik Leppkes <h.leppkes@gmail.com>
* commit 'a853388d2fc5be848cca839a9fdf39a97c2d7b0e':
hevc: change the stride of the MC buffer to be in bytes instead of elements
Not merged, FFmpeg HEVC DSP has diverged substantially from Libav.
Merged-by: Hendrik Leppkes <h.leppkes@gmail.com>
* commit '688417399c69aadd4c287bdb0dec82ef8799011c':
hevcdsp: split the pred functions by width
Not merged, FFmpeg HEVC DSP has diverged substantially from Libav.
Merged-by: Hendrik Leppkes <h.leppkes@gmail.com>
* commit '818bfe7f0a3ff243deb63c4b146de2563f38ffd4':
hevcdsp: split the epel functions by width
Not merged, FFmpeg HEVC DSP has diverged substantially from Libav.
Merged-by: Hendrik Leppkes <h.leppkes@gmail.com>
* commit '1f821750f0b8d0c87cbf88a28ad699b92db5ec88':
hevcdsp: split the qpel functions by width instead of by the subpixel fraction
Not merged, FFmpeg HEVC DSP has diverged substantially from Libav.
Merged-by: Hendrik Leppkes <h.leppkes@gmail.com>
Also correct the check to reject log < 7, because UPDATE_CACHE only
guarantees 25 meaningful bits.
This fixes undefined behavior:
runtime error: shift exponent is negative
Testing with START/STOP timers in get_ue_golomb, one for the first
branch (A) and one for the second (B), shows that there is practically no
slowdown, e.g. for the cavs decoder:
With the check in the B branch:
629 decicycles in get_ue_golomb B, 4194260 runs, 44 skips
433 decicycles in get_ue_golomb A,268434102 runs, 1354 skips
Without the check:
624 decicycles in get_ue_golomb B, 4194273 runs, 31 skips
433 decicycles in get_ue_golomb A,268434203 runs, 1253 skips
Since the B branch is executed far less often than the A branch, this
change is negligible, even more so for the h264 decoder, where the ratio
B/A is a lot smaller.
Fixes: mozilla bug 1230239
Fixes: fbeb8b2c7c996e9b91c6b1af319d7ebc/asan_heap-oob_195450f_2743_e8856ece4579ea486670be2b236099a0.bit
Found-by: Tyson Smith
Found-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
Reviewed-by: Michael Niedermayer <michael@niedermayer.cc>
Signed-off-by: Andreas Cadhalpun <Andreas.Cadhalpun@googlemail.com>
PSNR doesn't change as expected. The AAC spec doesn't really say
anything about how exactly to generate noise.
Signed-off-by: Rostislav Pehlivanov <atomnuker@gmail.com>
Quite a bit faster than int32_to_float_fmul_array8_c calling
ff_int32_to_float_fmul_scalar_neon through FmtConvertContext.
Number of cycles per int32_to_float_fmul_array8 call while decoding
padded.dts on exynos5422:
before after change
cortex-a7: 1270 951 -25%
cortex-a15: 434 285 -34%
checkasm --bench cycle counts: cortex-a15 cortex-a7
int32_to_float_fmul_array8_c: 1730.4 4384.5
int32_to_float_fmul_array8_neon_c: 571.5 1694.3
int32_to_float_fmul_array8_neon: 374.0 1448.8
Interesting are the differences between
int32_to_float_fmul_array8_neon_c and int32_to_float_fmul_array8_neon.
The former is current behaviour of calling
ff_int32_to_float_fmul_scalar_neon repeatedly from the c function,
The raw numbers differ since checkasm uses different lengths than the
dca decoder.
~25% faster dts decoding overall. The checkasm CPU cycles numbers are
not that useful since synth_filter_float() calls FFTContext.imdct_half().
cortex-a57 cortex-a53
synth_filter_float_c: 1866.2 3490.9
synth_filter_float_neon: 915.0 1531.5
With fftc.imdct_half forced to imdct_half_neon:
cortex-a57 cortex-a53
synth_filter_float_c: 1718.4 3025.3
synth_filter_float_neon: 926.2 1530.1
The vector mode was deprecated in ARMv7-A/VFPv3 and various cpu
implementations do not support it in hardware. Vector mode code will
depending the OS either be emulated in software or result in an illegal
instruction on cpus which does not support it. This was not really
problem in practice since NEON implementations of the same functions are
preferred. It will however become a problem for checkasm which tests
every cpu flag separately.
Since this is a cpu feature newer cpu do not support anymore the
behaviour of this flag differs from the other flags. It can be only
activated by runtime cpu feature selection.
The ISB (instruction synchronization barrier) might be too heavy for
START/STOPTIMER use but should be more accurate in checkasm where the
timing overhead is subtracted.
Include macros.h explicitly in common.h so that external code using
FFALIGN does not break. It was already implicitly included through
version.h. Include macros.h in lls.h and internal.h for FFALIGN.
lls.h was including common.h only for FFALIGN and internal.h was
missing the include for FFALIGN. `make checkheaders` did not catch it
because it's an internal header.
So far an AC-3 elementary stream is refered to in the PMT according to
System A (ATSC). However System B (DVB) has a different way to signal an AC-3
ES within the PMT. This different way can be enabled by a new flag. The flag is
more generally named 'system_b' as there are further differences between ATSC
and DVB (e.g. the signalling of E-AC-3) which should then also be covered by it
in the future.
Bug-Id: 73
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
That buffer is read only and marking it accordingly let
the user passing a constant buffer to it without having
a const-correctness warning.
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
The show option did not take clipping into account, so the borders on
the clipped side wouldn't show up. Fix it.
Signed-off-by: Jean Delvare <jdelvare@suse.de>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
This should fix this test failing on kfreebsd, a regression since
6e5dbe7, which decreased the CMP_TARGET by 1.
Reviewed-by: Rostislav Pehlivanov <atomnuker@gmail.com>
Signed-off-by: Andreas Cadhalpun <Andreas.Cadhalpun@googlemail.com>
The current muxer behaviour is to create streams in read_header() based
on the audio/video presence flags, but fill in the stream parameters
later when we actually get some packets for them. This is rather shady,
since other demuxers set the stream parameters immediately when the
stream is created and do not touch the stream codec context after that.
Change the flv demuxer to behave in the same way as other similar
demuxers -- create the streams only when we get a packet for them.
Almost all the places from which this function is called already check
the header manually and in the two that don't (the mp3 muxer) the check
should not cause any problems.
It will not be set unless the muxing codec context is also the encoding
context, which is discouraged. When the frame size is not known from
av_get_audio_frame_duration(), the fallback should still be good enough.
It will not be set if the stream codec context is not the encoding
context. Use av_get_audio_frame_duration() instead, it should work for
all audio codecs supported by the muxer.
Having a configure option with the same name as a MIPS ISA is confusing,
so better to remove it. This option was being used to add some
optimizations to a specific core (i6400). We will add the optimizations
just when the i6400 core has been detected, in a later patch.
Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Relying on AVPixFmtDescriptor.nb_components is cleaner and faster than
checking data and linesize for every possible plane.
Signed-off-by: Jean Delvare <jdelvare@suse.de>
Reviewed-by: Paul B Mahol <onemda@gmail.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
The transpose_4x4H is wrong which cost me much time to find this bug. The orders of r2 and r3 are wrong,
this bug waste me much time while I make aarch64 arm instruction which used the function.
This is a somewhat subtle failure that can occur when the realloc_array
fails in FORMATS_REF.
Signed-off-by: Ganesh Ajjanagadde <gajjanagadde@gmail.com>
-hex and -dump command line options do nothing unless -loglevel debug is set.
-dump by itself is useful for monitoring live streams (to get the current PTS for example) however when it is used with -loglevel debug for an RTMP stream, librtmp also dumps the packet data which makes the output too noisy.
do_pkt_dump is only set in check_keyboard_interaction or by the -dump command line option so this change should have no effect on any other parts of the code..
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
If the input contains too many too large values, the imdct can overflow.
Even if it didn't, the output would be larger than the valid range of 29
bits.
Note that this is a very delicate limit: Allowing values up to 1<<25
does not prevent input larger than 1<<29 from arriving at
sbr_sum_square, while limiting values to 1<<23 breaks the
fate-aac-fixed-al_sbr_hq_cm_48_5.1 test.
Signed-off-by: Andreas Cadhalpun <Andreas.Cadhalpun@googlemail.com>
pow is a ridiculous function for computing a simple Gaussian.
Reviewed-by: Paul B Mahol <onemda@gmail.com>
Signed-off-by: Ganesh Ajjanagadde <gajjanagadde@gmail.com>
Fix OOB access in search_for_pns which was using
w2 outside the window group loop, and fix a typo
in which it was checking sf_idx instead of band_type
Reviewed-by: Andreas Cadhalpun <andreas.cadhalpun@googlemail.com>
Signed-off-by: Andreas Cadhalpun <Andreas.Cadhalpun@googlemail.com>
Recent commits 6aaac24d72 and
3835554bf8 made progress towards cleaning
up usage of the formats API, and in particular fixed possible NULL pointer
dereferences.
This commit addresses the issue of possible resource leaks when some intermediate
call fails.
Tested with valgrind --leak-check=full --show-leak-kinds=all, and manual simulation
of malloc/realloc failures.
Fixes: CID 1250334.
Signed-off-by: Ganesh Ajjanagadde <gajjanagadde@gmail.com>
Recent commits 6aaac24d72 and
3835554bf8 made progress towards cleaning
up usage of the formats API, and in particular fixed possible NULL pointer
dereferences.
This commit addresses the issue of possible resource leaks when some intermediate
call fails.
Tested with valgrind --leak-check=full --show-leak-kinds=all, and manual simulation
of malloc/realloc failures.
Fixes: CID 1338330.
Reviewed-by: Paul B Mahol <onemda@gmail.com>
Signed-off-by: Ganesh Ajjanagadde <gajjanagadde@gmail.com>
Recent commits 6aaac24d72 and
3835554bf8 made progress towards cleaning
up usage of the formats API, and in particular fixed possible NULL pointer
dereferences.
This commit addresses the issue of possible resource leaks when some intermediate
call fails.
Tested with valgrind --leak-check=full --show-leak-kinds=all, and manual simulation
of malloc/realloc failures.
Fixes: CID 1338326, 1338329.
Signed-off-by: Ganesh Ajjanagadde <gajjanagadde@gmail.com>
Recent commits 6aaac24d72 and
3835554bf8 made progress towards cleaning
up usage of the formats API, and in particular fixed possible NULL pointer
dereferences.
This commit addresses the issue of possible resource leaks when some intermediate
call fails.
Tested with valgrind --leak-check=full --show-leak-kinds=all, and manual simulation
of malloc/realloc failures.
Fixes: CID 1338327.
Signed-off-by: Ganesh Ajjanagadde <gajjanagadde@gmail.com>
Recent commits 6aaac24d72 and
3835554bf8 made progress towards cleaning
up usage of the formats API, and in particular fixed possible NULL pointer
dereferences.
This commit addresses the issue of possible resource leaks when some intermediate
call fails. Unfortunately, even leaving aside this subtle intermediate
failure aspect, commit 8087632027 was only
partially successful in addressing memleaks. Hopefully, this commit
fixes the issue completely.
Tested with valgrind --leak-check=full --show-leak-kinds=all, and manual simulation
of malloc/realloc failures.
Fixes: CID 1270818.
Reviewed-by: Clément Bœsch <u@pkh.me>
Signed-off-by: Ganesh Ajjanagadde <gajjanagadde@gmail.com>
This gets rid of virtually useless hardcoded tables hackery. The reason
it is useless is that a 320 element lut is anyway placed regardless of
--enable-hardcoded-tables, from which all necessary tables are trivially
derived at runtime at very low cost:
sample benchmark (x86-64, Haswell, GNU/Linux, single run is really
what is relevant here since looping drastically changes the bench). Fluctuations
are on the order of 10% for the single run test:
39400 decicycles in aacsbr_tableinit, 1 runs, 0 skips
25325 decicycles in aacsbr_tableinit, 2 runs, 0 skips
18475 decicycles in aacsbr_tableinit, 4 runs, 0 skips
15008 decicycles in aacsbr_tableinit, 8 runs, 0 skips
13016 decicycles in aacsbr_tableinit, 16 runs, 0 skips
12005 decicycles in aacsbr_tableinit, 32 runs, 0 skips
11546 decicycles in aacsbr_tableinit, 64 runs, 0 skips
11506 decicycles in aacsbr_tableinit, 128 runs, 0 skips
11500 decicycles in aacsbr_tableinit, 256 runs, 0 skips
11183 decicycles in aacsbr_tableinit, 509 runs, 3 skips
Tested with FATE with/without --enable-hardcoded-tables.
Reviewed-by: Rostislav Pehlivanov <atomnuker@gmail.com>
Signed-off-by: Ganesh Ajjanagadde <gajjanagadde@gmail.com>
When the interpolated value is divided by the sum of weights, no
rounding is done, which means the value is truncated. This results in
a slight bias towards dark green in the interpolated area. Rounding
properly removes the bias.
I measured this change to reduce the interpolation error by 1 to 2 %
on average on a number of sample input and logo area combinations.
Signed-off-by: Jean Delvare <jdelvare@suse.de>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
pow is a very wasteful function for this purpose. A low hanging fruit
would be simply to replace with exp2f, and that does yield some speedup.
However, there are 2 drawbacks of this:
1. It does not exploit the integer nature of the argument.
2. (minor) Some platforms lack a proper exp2f routine, making benefits available
only to non broken libm.
3. exp2f does not solve the same issue that plagues pow, namely terrible
worst case performance. This is a fundamental issue known as the
"table-maker's dilemma" recognized by Prof. Kahan himself and
subsequently elaborated and researched by many others. All this is clear from benchmarks below.
This exploits the IEEE-754 format to get very good performance even in
the worst case for integer powers of 2. This solves all the issues noted
above. Function tested with clang usan over [-1000, 1000] (beyond range of
relevance for this, which is [-255, 255]), patch itself with FATE.
Benchmarks obtained on x86-64, Haswell, GNU-Linux via 10^5 iterations of
the pow call, START/STOP, and command ffplay ~/samples/jpeg2000/chiens_dcinema2K.mxf.
Low number of runs also given to prove the point about worst case:
pow:
216270 decicycles in pow, 1 runs, 0 skips
110175 decicycles in pow, 2 runs, 0 skips
56085 decicycles in pow, 4 runs, 0 skips
29013 decicycles in pow, 8 runs, 0 skips
15472 decicycles in pow, 16 runs, 0 skips
8689 decicycles in pow, 32 runs, 0 skips
5295 decicycles in pow, 64 runs, 0 skips
3599 decicycles in pow, 128 runs, 0 skips
2748 decicycles in pow, 256 runs, 0 skips
2304 decicycles in pow, 511 runs, 1 skips
2072 decicycles in pow, 1022 runs, 2 skips
1963 decicycles in pow, 2044 runs, 4 skips
1894 decicycles in pow, 4091 runs, 5 skips
1860 decicycles in pow, 8184 runs, 8 skips
exp2f:
134140 decicycles in pow, 1 runs, 0 skips
68110 decicycles in pow, 2 runs, 0 skips
34530 decicycles in pow, 4 runs, 0 skips
17677 decicycles in pow, 8 runs, 0 skips
9175 decicycles in pow, 16 runs, 0 skips
4931 decicycles in pow, 32 runs, 0 skips
2808 decicycles in pow, 64 runs, 0 skips
1747 decicycles in pow, 128 runs, 0 skips
1208 decicycles in pow, 256 runs, 0 skips
952 decicycles in pow, 512 runs, 0 skips
822 decicycles in pow, 1024 runs, 0 skips
765 decicycles in pow, 2047 runs, 1 skips
722 decicycles in pow, 4094 runs, 2 skips
693 decicycles in pow, 8190 runs, 2 skips
exp2fi:
2740 decicycles in pow, 1 runs, 0 skips
1530 decicycles in pow, 2 runs, 0 skips
955 decicycles in pow, 4 runs, 0 skips
622 decicycles in pow, 8 runs, 0 skips
477 decicycles in pow, 16 runs, 0 skips
368 decicycles in pow, 32 runs, 0 skips
317 decicycles in pow, 64 runs, 0 skips
291 decicycles in pow, 128 runs, 0 skips
277 decicycles in pow, 256 runs, 0 skips
268 decicycles in pow, 512 runs, 0 skips
265 decicycles in pow, 1024 runs, 0 skips
263 decicycles in pow, 2048 runs, 0 skips
263 decicycles in pow, 4095 runs, 1 skips
260 decicycles in pow, 8191 runs, 1 skips
Reviewed-by: Michael Niedermayer <michael@niedermayer.cc>
Signed-off-by: Ganesh Ajjanagadde <gajjanagadde@gmail.com>
In the merge commit 78265fcfee this behaviour
was broken and the CORRUPT flag would never ever be set on a frame. However
the flag on the AVCodecContext was taken into account properly, including
AV_CODEC_FLAG2_SHOW_ALL.
The reason for this was that the recovered field of the next output picture
was always set to TRUE whenever one of the two AVCodecContext flags was set,
which made it impossible to detect later, before outputting, if the frame was
really recovered or not. Now don't set it to TRUE unless the frame is really
recovered and check the AVCodecContext flags right before outputting.
Signed-off-by: Sebastian Dröge <sebastian@centricular.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
With only 7 coefficients per short window at most the extra precision
makes a difference and seems to reduce crackling and stddev even
further.
Signed-off-by: Rostislav Pehlivanov <atomnuker@gmail.com>
* commit 'b805482b1fba1d82fbe47023a24c9261f18979b6':
aac: Provide more information on the failure message
Merged-by: Hendrik Leppkes <h.leppkes@gmail.com>
* commit '1077d8c8455b27688de37cd04f8cc253fb37944d':
configure: Add -framework CoreVideo when building the avfoundation indev
Merged-by: Hendrik Leppkes <h.leppkes@gmail.com>
* commit 'bf12a81cc67d62dd45c58e29fa0e9177331cc151':
configure: Replace `pr` since it is not provided by busybox
Not merged as requested by Timothy Gu.
Merged-by: Hendrik Leppkes <h.leppkes@gmail.com>
* commit '5f3a081b42b84404a40a52c80ef7a354cf048c56':
avi: Spin out the logic to position to the next non-interleaved stream
Merged-by: Hendrik Leppkes <h.leppkes@gmail.com>
Don't print a warning when dcadec_context_filter() returns positive
warning code. Most relevant warnings are now output through the callback
function.
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Take request_channel_layout as a hint and don't force 2.0 downmix by
using both the 2CH and 6CH flags together.
Remove warnings about missing coefficients because they are no longer
relevant.
Honor AV_CH_LAYOUT_NATIVE and make it possible for native DTS channel
layout to be output.
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
matroskaenc applies divisors to the display width/height when generating
stereo content. This patch adds the corresponding multipliers to matroskadec
so that the original sample aspect ratio can be recovered.
Signed-off-by: wm4 <nfxjfg@googlemail.com>
Signed-off-by: Vittorio Giovara <vittorio.giovara@gmail.com>
These variables are coming from mpegvideoenc where are supposedly used
as bit counters on various frame properties. However their use is
unclear as they lack documentation, are available only from a very small
subset of encoders, and they are hardly used in the wild. Also frame_bits
in aacenc is employed in a similar way.
Remove this functionality from AVCodecContex, these variable are mostly
frame properties, and too few encoders support setting them with anything
useful.
Signed-off-by: Vittorio Giovara <vittorio.giovara@gmail.com>
Most option values are simply unused or ignored and in practice the
majory of codecs only need to check whether to enable rle or not.
Add appropriate codec private options which better expose the allowed
features.
Signed-off-by: Vittorio Giovara <vittorio.giovara@gmail.com>
* commit 'f023d57d355ff3b917f1aad9b03db5c293ec4244':
lavc: G.723.1 encoder
Split existing FFmpeg G.723.1 encoder into a new file.
Merged-by: Hendrik Leppkes <h.leppkes@gmail.com>
* commit '165cc6fb9defcd79fd71c08167f3e8df26b058ff':
g723_1: Move sharable functions to a separate file
Merged-by: Hendrik Leppkes <h.leppkes@gmail.com>
* commit 'aac996cc01042194bf621d845bbe684549b5882e':
g723_1: Rename files to better reflect their purpose
Merged-by: Hendrik Leppkes <h.leppkes@gmail.com>
* commit 'b74b88f30da2389f333a31815d8326d5576d3331':
g723_1: Handle values at the ends of the table in lsp2lpc()
Merged-by: Hendrik Leppkes <h.leppkes@gmail.com>
* commit 'a0fa6d06b848f26b16ba12f0a9a4a85b93ab8022':
matroska: Warn when metadata references a non-existent element
Merged-by: Hendrik Leppkes <h.leppkes@gmail.com>
* commit '4f979418c723652ad4e43115118c57a44bd46b52':
avfoundation: Simple capture
Not merged on request by Thilo Borgmann, original author of the
AVFoundation capture in FFmpeg.
Merged-by: Hendrik Leppkes <h.leppkes@gmail.com>
Fix a dead lock under certain conditions. Let's assume we have a queue of 1
message max, 2 senders, and 1 receiver.
Scenario (real record obtained with debug added):
[...]
SENDER #0: acquired lock
SENDER #0: queue is full, wait
SENDER #1: acquired lock
SENDER #1: queue is full, wait
RECEIVER: acquired lock
RECEIVER: reading a msg from the queue
RECEIVER: signal the cond
RECEIVER: acquired lock
RECEIVER: queue is empty, wait
SENDER #0: writing a msg the queue
SENDER #0: signal the cond
SENDER #0: acquired lock
SENDER #0: queue is full, wait
SENDER #1: queue is full, wait
Translated:
- initially the queue contains 1/1 message with 2 senders blocking on
it, waiting to push another message.
- Meanwhile the receiver is obtaining the lock, read the message,
signal & release the lock. For some reason it is able to acquire the
lock again before the signal wakes up one of the sender. Since it
just emptied the queue, the reader waits for the queue to fill up
again.
- The signal finally reaches one of the sender, which writes a message
and then signal the condition. Unfortunately, instead of waking up
the reader, it actually wakes up the other worker (signal = notify
the condition just for 1 waiter), who can't push another message in
the queue because it's full.
- Meanwhile, the receiver is still waiting. Deadlock.
This scenario can be triggered with for example:
tests/api/api-threadmessage-test 1 2 100 100 1 1000 1000
One working solution is to make av_thread_message_queue_{send,recv}()
call pthread_cond_broadcast() instead of pthread_cond_signal() so both
senders and receivers are unlocked when work is done (be it reading or
writing).
This second solution replaces the condition with two: one to notify the
senders, and one to notify the receivers. This prevents senders from
notifying other senders instead of a reader, and the other way around.
It also avoid broadcasting to everyone like the first solution, and is,
as a result in theory more optimized.
fix default basefreq/endfreq comparison
on platform that does not do comparison
in double type
found on zeranoe 32-bit build, where
default freq range is detected as non-default
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
If the chroma components are subsampled, smaller buffers are allocated
for them. In that case the maximal block_offset for the chroma
components is not as large as for the luma component.
This fixes out of bounds writes causing segmentation faults or memory
corruption.
Reviewed-by: Michael Niedermayer <michael@niedermayer.cc>
Signed-off-by: Andreas Cadhalpun <Andreas.Cadhalpun@googlemail.com>
There are a couple of major changes here:
1. Start using TNS coefficient compression.
2. Start using 3 bits per coefficient maximum for short windows.
The bits we save from these 2 changes seem to make a nice impact on the
rest of the file/windows.
3. Remove special case gain checking for short windows.
4. Modify the coefficient loop to support up to 3 windows.
The additional restrictions on TNS were something that was no in the
specifications and furthermore restricting TNS to only low energy short
windows was done to compensate for bugs elsewhere in the code.
Overall, the improvements here reduce crackling artifacts heard in very
noisy tracks.
Signed-off-by: Rostislav Pehlivanov <atomnuker@gmail.com>
The original plan was to have TNS use data from the PNS search to better
tune itself to noise but this was never used nor necessary. This should
slightly boost the PNS accuracy if TNS was used.
Signed-off-by: Rostislav Pehlivanov <atomnuker@gmail.com>
It is required to call va_end for each invocation of va_start within the
same function.
Fixes: CID 1341583.
Reviewed-by: Michael Niedermayer <michael@niedermayer.cc>
Signed-off-by: Ganesh Ajjanagadde <gajjanagadde@gmail.com>
Checking the codec context parameters to find out this information is
far too unreliable to be useful, so it is safer to assume B-frames are
always present.
Pretty standard macros, these should help libav*
users avoid repeating ver.si.on parsing code,
which aids in compatibility-checking tasks like
identifying FFmpeg from Libav (_MICRO >= 100 check).
Something many are doing since we are not
intercompatible anymore.
Signed-off-by: Reynaldo H. Verdejo Pinochet <reynaldo@osg.samsung.com>
Fall back to maximum DPB size if the level is unknown.
This should be more spec-compliant and does not depend on the caller
setting has_b_frames before opening the decoder.
The old behaviour, when the delay is supplied by the caller setting
has_b_frames, can still be obtained by setting strict_std_compliance
below normal.
According to the spec, the reference list for a slice should be
constructed by first generating an initial (what we now call "default")
reference list and then optionally applying modifications to it.
Our code has an optimization where the initial reference list is
constructed for the first inter slice and then rebuilt for other slices
if needed. This, however, adds complexity to the code, requires an extra
2.5kB array in the codec context and there is no reason to think that it
has any positive effect on performance. Therefore, simplify the code by
generating the reference list from scratch for each slice.
Fixes out of array read
Fixes: d41d8cd98f00b204e9800998ecf8427e/signal_sigsegv_321165b_7641_077dfcd8cbc80b1c0b470c8554cd6ffb.bit
Found-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Fixes out of array read
Fixes: 99d142c47e6ba3510a74b872a1a2ae72/asan_heap-oob_11b36f4_3811_0f5c69e7609a88a580135678de1df844.dxa
Found-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Thiss commit removes the experimental flag from the native AAC Encoder
and thus makes it the default.
After a lot of work, done by myself and Claudio Freire, the quality of
this encoder rivals and surpasses libfdk_aac in some situations. The
encoder had instability issues earlier which prevented it from having
its experimental flag removed, however the last commits done by Claudio
removed the last known source of instability and solved a lot of
problems which were previously observed. The issues were caused by the
various coding tools interfering with the scalefactor indices. Thus,
with these problems solved, it should now be possible to declare this
encoder as the default and recommend that the users should use it
instead of others provided by external libraries, as it is both faster
and has a subjectively higher quality with selected tracks.
The encoder has still yet to be fine tuned for every possible audio file
type like music or voice, so it is hoped that with the experimental flag
removed the users should be able to provide feedback and make the
encoder better than the alternatives for every type of audio and at
every bitrate.
Signed-off-by: Rostislav Pehlivanov <atomnuker@gmail.com>
Since the next commit removes the experimental flag from the encoder
it's better to update the documentation which has been around in its
current form for as long as the encoder itself.
Signed-off-by: Rostislav Pehlivanov <atomnuker@gmail.com>
ANMR has some interesting things coming up but is currently not in a
shape fit for non-experimental usage. Same with "FAST".
Signed-off-by: Rostislav Pehlivanov <atomnuker@gmail.com>
This coder produces a much lower quality audio than the rest, is much
slower and is unstable. Hasn't been updated for a very long time as
well, hence it is more appropriate to remove it since it also depends on
a big burden of a code (the encode_window_bands_info function which is
just as old, just as unstable and bad and in no way modifiable or
fixable).
Signed-off-by: Rostislav Pehlivanov <atomnuker@gmail.com>
QuickTime metadata can come after trak data. Add indicator for which trak is being parsed (-1 if none) so that global metadata after the trak can be parsed.
Signed-off-by: Neil Birkbeck <neil.birkbeck@gmail.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Using -ss as an input option shifts timestamps down by the seek, so it
doesn't have to be added to the recording time when checking whether to
stop.
Fixes#977
Signed-off-by: Simon Thelen <ffmpeg-dev@c-14.de>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
If minq is negative, the range of sf_idx can be larger than
SCALE_MAX_DIFF allows, causing assertion failures later in
encode_scale_factors.
Reviewed-by: Claudio Freire <klaussfreire@gmail.com>
Signed-off-by: Andreas Cadhalpun <Andreas.Cadhalpun@googlemail.com>
Having a configure option with the same name as a MIPS ISA is confusing,
so better to remove it. This option was being used to add some
optimizations to a specific core (p5600). We will add the optimizations
just when the p5600 core has been detected, in a later patch.
Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
If size is zero, avio_get_str fails, leaving the buffer uninitialized.
This causes invalid reads in av_set_options_string.
Reviewed-by: Michael Niedermayer <michael@niedermayer.cc>
Signed-off-by: Andreas Cadhalpun <Andreas.Cadhalpun@googlemail.com>
Otherwise the ffm demuxer can return the same packets endlessly, if
there is no server attached.
Reviewed-by: Michael Niedermayer <michael@niedermayer.cc>
Signed-off-by: Andreas Cadhalpun <Andreas.Cadhalpun@googlemail.com>
Including these headers is not needed and breaks building on Windows as it
tries to activate the full compat tools, which are not needed for host
tools.
ts->mux_rate is int (signed 32-bit) type. The period calculations
will start to overflow when mux_rate > 5mbps. This fixes overflows
by converting first to 64-bit type.
Fixes#5044.
Signed-off-by: Timo Teräs <timo.teras@iki.fi>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
This fixes builds with --disable-vda, which previously failed with
undefined references to CVImageBuffer* and CVPixelBuffer* functions.
Signed-off-by: Martin Storsjö <martin@martin.st>
The fps variable is explicitly set to -1 in case of some errors, the check must
thus be signed or the code setting it needs to use 0 as error code
the type of the field could be changed as well but its in an installed header
Fixes: integer overflow
Fixes: 9982cc157b1ea90429435640a989122f/asan_generic_3ad004a_3799_22cf198d9cd09928e2d9ad250474fa58.mov
Found-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Fixes: out of array read
Fixes: 36b8096fefab16c4c9326a508053e95c/signal_sigsegv_1d9ce18_3233_1a55196b018106dfabeace071a432d9e.r3d
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
lrint is faster, and is more consistent across the codebase.
Reviewed-by: Michael Niedermayer <michael@niedermayer.cc>
Signed-off-by: Ganesh Ajjanagadde <gajjanagadde@gmail.com>
There was no reason AFAIK for making AV_CRC_24_IEEE 12. This simply
resulted in wasted space under --enable-hardcoded-tables:
dynamic: 1318672 libavutil/libavutil.so.55
old : 1330680 libavutil/libavutil.so.55
new : 1326488 libavutil/libavutil.so.55
Minor version number is bumped, with ifdefry due to API breakage.
Reviewed-by: James Almer <jamrial@gmail.com>
Signed-off-by: Ganesh Ajjanagadde <gajjanagadde@gmail.com>
While pr is a valid POSIX.1 command, its usage in configure
is a little borderline and is possible to replace it with
printf.
Bug-Id: 913
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
Do not clip output samples, so that clipping can be handled by other filters.
Alow setting curve points above 0dB. This is useful when operating with floats.
Signed-off-by: Paul B Mahol <onemda@gmail.com>
This code is disabled by default so not to regress endpoints sending invalid MIME, but can be enabled via AVOption 'strict_mime_boundary'
Signed-off-by: Alex Agranovsky <alex@sighthound.com>
Fixes out of array read
Fixes: 0a7ff0c1d93da9cef28a315ec91b692a/asan_heap-oob_4a52e5_3604_9c56dbb20e308f4faeef7b35f688521a.ape
Found-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
This patch does 4 things, all of which interact and thus it
woudln't be possible to commit them separately without causing
either quality regressions or assertion failures.
Fate comparison targets don't all reflect improvements in
quality, yet listening tests show substantially improved quality
and stability.
1. Increase SF range utilization.
The spec requires SF delta values to be constrained within the
range -60..60. The previous code was applying that range to
the whole SF array and not only the deltas of consecutive values,
because doing so requires smarter code: zeroing or otherwise
skipping a band may invalidate lots of SF choices.
This patch implements that logic to allow the coders to utilize
the full dynamic range of scalefactors, increasing quality quite
considerably, and fixing delta-SF-related assertion failures,
since now the limitation is enforced rather than asserted.
2. PNS tweaks
The previous modification makes big improvements in twoloop's
efficiency, and every time that happens PNS logic needs to be
tweaked accordingly to avoid it from stepping all over twoloop's
decisions. This patch includes modifications of the sort.
3. Account for lowpass cutoff during PSY analysis
The closer PSY's allocation is to final allocation the better
the quality is, and given these modifications, twoloop is now
very efficient at avoiding holes. Thus, to compute accurate
thresholds, PSY needs to account for the lowpass applied
implicitly during twoloop (by zeroing high bands).
This patch makes twoloop set the cutoff in psymodel's context
the first time it runs, and makes PSY account for it during
threshold computation, making PE and threshold computations
closer to the final allocation and thus achieving better
subjective quality.
4. Tweaks to RC lambda tracking loop in relation to PNS
Without this tweak some corner cases cause quality regressions.
Basically, lambda needs to react faster to overall bitrate
efficiency changes since now PNS can be quite successful in
enforcing maximum bitrates, when PSY allocates too many bits
to the lower bands, suppressing the signals RC logic uses to
lower lambda in those cases and causing aggressive PNS.
This tweak makes PNS much less aggressive, though it can still
use some further tweaks.
Also update MIPS specializations and adjust fuzz
Also in lavc/mips/aacpsy_mips.h: remove trailing whitespace
matroskaenc.c applies divisors to the display width/height when generating
stereo content. This patch adds the corresponding multipliers to matroskadec.c
so that the original sample aspect ratio can be recovered.
Signed-off-by: wm4 <nfxjfg@googlemail.com>
"Fast seek" uses linear interpolation to find the position of the
requested seek time. For CBR this is more direct than using the
mp3 TOC and bypassing the TOC avoids problems with TOC precision.
(see https://crbug.com/545914#c13)
For VBR, fast seek is not precise, so continue to prefer the TOC
when available (the lesser of two evils).
Also, some re-ordering of the logic in mp3_seek to simplify and
give usetoc=1 precedence over fastseek flag.
Signed-off-by: wm4 <nfxjfg@googlemail.com>
This is likely more precise and conveys the intent better.
Reviewed-by: Mark Harris <mark.hsj@gmail.com>
Signed-off-by: Ganesh Ajjanagadde <gajjanagadde@gmail.com>
On systems having cbrt, there is no reason to use the slow pow function.
Sample benchmark (x86-64, Haswell, GNU/Linux):
new:
5124920 decicycles in cbrt_tableinit, 1 runs, 0 skips
old:
12321680 decicycles in cbrt_tableinit, 1 runs, 0 skips
Reviewed-by: Ronald S. Bultje <rsbultje@gmail.com>
Signed-off-by: Ganesh Ajjanagadde <gajjanagadde@gmail.com>
This further speeds up runtime initialization, with identical generated tables.
Sample benchmark (x86-64, Haswell, GNU/Linux):
old:
34441423 decicycles in mpegaudio_tableinit, 8192 runs, 0 skips
new:
10776291 decicycles in mpegaudio_tableinit, 8192 runs, 0 skips
Most low hanging fruit is taken care of here. For some idea, note that
83,064 array elements totalling 233,722 bytes need to be initialized.
Thus, with this patch, we average ~ 12.9 cycles per element or ~ 4.6
cycles per byte.
Reviewed-by: Derek Buitenhuis <derek.buitenhuis@gmail.com>
Signed-off-by: Ganesh Ajjanagadde <gajjanagadde@gmail.com>
This does some miscellaneous stuff mainly avoiding the usage of pow to
achieve significant speedups. This is not speed critical, but is
unnecessary latency and cycles wasted for a user.
All tables tested and are identical to the old ones
(bit-exact even in floating point case).
Sample benchmark (x86-64, Haswell, GNU/Linux):
old:
102329530 decicycles in mpegaudio_tableinit, 1 runs, 0 skips
new:
34111900 decicycles in mpegaudio_tableinit, 1 runs, 0 skips
Reviewed-by: Ronald S. Bultje <rsbultje@gmail.com>
Signed-off-by: Ganesh Ajjanagadde <gajjanagadde@gmail.com>
This is useful for build-time table generation (--enable-hardcoded-tables),
by providing compat shims for hosts that have broken libms.
This file is deliberately kept minimal; functions can always be added on
an as-needed basis.
Reviewed-by: Clément Bœsch <u@pkh.me>
Reviewed-by: Ronald S. Bultje <rsbultje@gmail.com>
Signed-off-by: Ganesh Ajjanagadde <gajjanagadde@gmail.com>
Whoever wrote this stuff had a pretty bad libm - digits differ pretty
quickly.
Reviewed-by: Ronald S. Bultje <rsbultje@gmail.com>
Signed-off-by: Ganesh Ajjanagadde <gajjanagadde@gmail.com>
Remove all modes except levels mode.
Users should already switch to other filters with
extended funcionality: vectorscope and waveform.
Signed-off-by: Paul B Mahol <onemda@gmail.com>
The code expects actual positive numbers and gives completely wrong
results if INT64_MIN is treated as positive
Instead clip it into the valid range that is add 1 and treat it as
negative
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
The table in question is a 253 byte one. In fact, it turns out that
dynamic generation of the table results in an increased binary size.
Code compiled with GCC 5.2.0, x86-64 (size in bytes), before and after
patch:
old: 62321064 libavcodec/libavcodec.so.57
new: 62320536 libavcodec/libavcodec.so.57
Thus, it always make sense to statically allocate this.
Tested with FATE with/without --enable-hardcoded-tables.
Reviewed-by: wm4 <nfxjfg@googlemail.com>
Signed-off-by: Ganesh Ajjanagadde <gajjanagadde@gmail.com>
Fixes: ==13287== Invalid read of size 4
==13287== at 0x45161A: flush_buffer (aviobuf.c:143)
==13287== by 0x451971: avio_flush (aviobuf.c:200)
==13287== by 0x512CCF: av_write_trailer (mux.c:1016)
==13287== by 0x41A5E0: close_connection (ffserver.c:853)
==13287== by 0x421EDC: rtsp_cmd_interrupt (ffserver.c:3245)
==13287== by 0x420B9C: rtsp_parse_request (ffserver.c:2854)
==13287== by 0x41A9C2: handle_connection (ffserver.c:930)
==13287== by 0x41A04B: http_server (ffserver.c:700)
==13287== by 0x423A60: main (ffserver.c:3897)
==13287== Address 0xb6cd258 is 88 bytes inside a block of size 192 free'd
==13287== at 0x4C2B5D9: free (vg_replace_malloc.c:446)
==13287== by 0x1004DAC: av_free (mem.c:239)
==13287== by 0x454835: avio_close_dyn_buf (aviobuf.c:1170)
==13287== by 0x41F385: http_prepare_data (ffserver.c:2368)
==13287== by 0x41F59B: http_send_data (ffserver.c:2416)
==13287== by 0x41ABE2: handle_connection (ffserver.c:986)
==13287== by 0x41A04B: http_server (ffserver.c:700)
==13287== by 0x423A60: main (ffserver.c:3897)
Reviewed-by: "Reynaldo H. Verdejo Pinochet" <reynaldo@osg.samsung.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Fixes out of array reads.
Found-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Signed-off-by: Vittorio Giovara <vittorio.giovara@gmail.com>
Fixes: out of array read
Fixes: 76c515fc3779d1b838667c61ea13ce92/asan_heap-oob_1fc0d07_8913_794a4629a264ebdb25b58d3a94ed1785.bit
Found-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
The DC VLC table used is too small, fixing this requires a sample,
thus request a sample.
Some samples are said to work even though the table has the wrong size, thus
this is left enabled if the user enables experimental features.
Fixes: 2abd25478c62a675f335fac00b467023/asan_static-oob_10aff98_1227_8811480c6ef1e970a7977ceb7e5a9958.mxf
Found-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
Approved-by: kurosu
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
As noted in a comment, pe.min in the reference encoder
is centered around current pe. The bit reservoir algo
needs pe.min to be a local minimum, because it can only
account for local PE variations. If it's set to a global
minimum as was being done, bit reservoir logic doesn't
work as efficiently.
This patch tries to forget old minimums and converge to
a local minimum without losing the stability of the
previous solution. Listening tests until now suggest this
solves numerous RC issues.
* commit '12b14382861fbf19378afcddaa19cd9a949a86a3':
udp: Provide additional information on getaddrinfo failure
Merged-by: Hendrik Leppkes <h.leppkes@gmail.com>
* commit '7831fb90503142e32cc3c9be43bc3f9d342ded6b':
textureencdsp: cosmetics: Use normal static const for tables
Merged-by: Hendrik Leppkes <h.leppkes@gmail.com>
* commit '823fa7004571cb8404ca5785f9fa6e85f0f9f3d3':
fate: Rework sgi tests into a suite and add the missing ones
Merged-by: Hendrik Leppkes <h.leppkes@gmail.com>
* commit '4a0918cae6394e503b17c71f8f171b4a795eb849':
sgienc: Support encoding high bit depth images with RLE
Merged-by: Hendrik Leppkes <h.leppkes@gmail.com>
* commit '8375dc1dd101d51baa430f34c0bcadfa37873896':
asfdec: handle the case when the stream index has an invalid value better
Merged-by: Hendrik Leppkes <h.leppkes@gmail.com>
* commit 'c12c085be7e86880924249e5cb3f898e45dee134':
dcadec: Do not check for overreads in auxiliary data
Merged-by: Hendrik Leppkes <h.leppkes@gmail.com>
* commit 'afdff8008149515afebf9992eae84be7d76e6b1e':
configure: Clearly state that MSYS native builds are discouraged
Merged-by: Hendrik Leppkes <h.leppkes@gmail.com>
Fix color fading: previously color could fade to red when
volume level for red color was actually never reached.
Display volume value on right side.
Use red color only if clipping is needed.
Signed-off-by: Paul B Mahol <onemda@gmail.com>
Fixes probing of truehd/mlp files with a lot of frames in between the
major sync frames. The spec allows a distance of up to 128 frames in
between major sync frames, which leads to the probing code not reaching
the desired score.
Fixes out of array read
Fixes: 59bb925e90201fa0f87f0a31945d43b5/asan_heap-oob_4a52e5_3388_66027f11e3d072f1e02401ecc6193361.jvt
Found-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Fixes out of array access
Fixes: 482d8f2fd17c9f532b586458a33f267c/asan_heap-oob_4a52b6_7417_1d08d477736d66cdadd833d146bb8bae.mov
Found-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Fixes out of array read
Fixes: 2f95ddd996db8a6281d2e18c184595a7/asan_heap-oob_192fe91_3330_58e4441181e30a66c19f743dcb392347.bit
Found-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Fixes out of array access
Fixes: 08664a2a7921ef48172f26495c7455be/asan_heap-oob_23036c6_3301_523388ef84285a0270caf67a43247b59.bit
Found-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
ff_aac_tableinit is a macro in the case of hardcoded tables, so wrap
that up in a function (similar to how the decoder template does it) and
use that as the argument for ff_thread_once().
Signed-off-by: Rostislav Pehlivanov <atomnuker@gmail.com>
Fixes out of array access
Fixes: 01859c9a9ac6cd60a008274123275574/asan_heap-oob_1dff571_8250_50d3d1611e294c3519fd1fa82198b69b.avi
Found-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Fixes out of array read
Fixes: 007c4a36608ebdf27ee260ad60a81184/asan_heap-oob_32076b4_2243_116b1cb29d91cc4974d6680e3d10bd91.bit
Found-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
AAC-Fixed decoder segfaulted. This commit makes the aac encoder
and decoder init the table twice in case of transcoding again.
Signed-off-by: Rostislav Pehlivanov <atomnuker@gmail.com>
Since the ff_aac_tableinit() can be called by both the encoder and
the decoder (in case of transcoding) this commit shares the AVOnce
variable to prevent this.
Signed-off-by: Rostislav Pehlivanov <atomnuker@gmail.com>
This speeds up aac_tablegen to a ludicruous degree (~97%), i.e to the point
where it can be argued that runtime initialization can always be done instead of
hard-coded tables. The only cost is essentially a trivial increase in
the stack size.
Even if one does not care about this, the patch also improves accuracy
as detailed below.
Performance:
Benchmark obtained by looping 10^4 times over ff_aac_tableinit.
Sample benchmark (x86-64, Haswell, GNU/Linux):
old:
1295292 decicycles in ff_aac_tableinit, 512 runs, 0 skips
1275981 decicycles in ff_aac_tableinit, 1024 runs, 0 skips
1272932 decicycles in ff_aac_tableinit, 2048 runs, 0 skips
1262164 decicycles in ff_aac_tableinit, 4096 runs, 0 skips
1256720 decicycles in ff_aac_tableinit, 8192 runs, 0 skips
new:
21112 decicycles in ff_aac_tableinit, 511 runs, 1 skips
21269 decicycles in ff_aac_tableinit, 1023 runs, 1 skips
21352 decicycles in ff_aac_tableinit, 2043 runs, 5 skips
21386 decicycles in ff_aac_tableinit, 4080 runs, 16 skips
21299 decicycles in ff_aac_tableinit, 8173 runs, 19 skips
Accuracy:
The previous code was resulting in needless loss of
accuracy due to the pow being called in succession. As an illustration
of this:
ff_aac_pow34sf_tab[3]
old : 0.000000000007598092294225
new : 0.000000000007598091426864
real: 0.000000000007598091778545
truncated to float
old : 0.000000000007598092294225
new : 0.000000000007598091426864
real: 0.000000000007598091426864
showing that the old value was not correctly rounded. This affects a
large number of elements of the array.
Patch tested with FATE.
Reviewed-by: Rostislav Pehlivanov <atomnuker@gmail.com>
Signed-off-by: Ganesh Ajjanagadde <gajjanagadde@gmail.com>
Avoid decoding a frame to get the codec parameters while the codec
supports FF_CODEC_CAP_SKIP_FRAME_FILL_PARAM. This is particulary useful
to avoid decoding twice images (once in avformat_find_stream_info and
once when the actual decode is made).
This hugely reduces the echo which was introduced with the previous
commit (though likely because previously everything was broken).
Makes LTP actually worthwhile now.
Signed-off-by: Rostislav Pehlivanov <atomnuker@gmail.com>
This removes wasteful pow(x, 2.0) that although not terribly important
for speed, is still useless.
Reviewed-by: Paul B Mahol <onemda@gmail.com>
Signed-off-by: Ganesh Ajjanagadde <gajjanagadde@gmail.com>
Gain computation for various curves was being done in a needlessly
inaccurate fashion. Of course these are all subjective curves, but when
a curve is advertised to the user, it should be matched as closely as
possible within the limitations of libm. In particular, the constants
kept here were pretty inaccurate for double precision.
Speed improvements are mainly due to the avoidance of pow, the most
notorious of the libm functions in terms of performance. To be fair, it
is the GNU libm that is among the worst, but it is not really GNU libm's fault
since others simply yield a higher error as measured in ULP.
"Magic" constants are also accordingly documented, since they take at
least a minute of thought for a casual reader.
Reviewed-by: Paul B Mahol <onemda@gmail.com>
Signed-off-by: Ganesh Ajjanagadde <gajjanagadde@gmail.com>
This is a trivial rewrite of the loops that results in better
prefetching and associated cache efficiency. Essentially, the problem is
that modern prefetching logic is based on finite state Markov memory, a reasonable
assumption that is used elsewhere in CPU's in for instance branch
predictors.
Surrounding loops all iterate forward through the array, making the
predictor think of prefetching in the forward direction, but the
intermediate loop is unnecessarily in the backward direction.
Speedup is nontrivial. Benchmarks obtained by 10^6 iterations within
solve_lls, with START/STOP_TIMER. File is tests/data/fate/flac-16-lpc-cholesky.err.
Hardware: x86-64, Haswell, GNU/Linux.
new:
17291 decicycles in solve_lls, 2096706 runs, 446 skips
17255 decicycles in solve_lls, 4193657 runs, 647 skips
17231 decicycles in solve_lls, 8384997 runs, 3611 skips
17189 decicycles in solve_lls,16771010 runs, 6206 skips
17132 decicycles in solve_lls,33544757 runs, 9675 skips
17092 decicycles in solve_lls,67092404 runs, 16460 skips
17058 decicycles in solve_lls,134188213 runs, 29515 skips
old:
18009 decicycles in solve_lls, 2096665 runs, 487 skips
17805 decicycles in solve_lls, 4193320 runs, 984 skips
17779 decicycles in solve_lls, 8386855 runs, 1753 skips
18289 decicycles in solve_lls,16774280 runs, 2936 skips
18158 decicycles in solve_lls,33548104 runs, 6328 skips
18420 decicycles in solve_lls,67091793 runs, 17071 skips
18310 decicycles in solve_lls,134187219 runs, 30509 skips
Reviewed-by: Michael Niedermayer <michael@niedermayer.cc>
Signed-off-by: Ganesh Ajjanagadde <gajjanagadde@gmail.com>
Copy pointers to AVPicture after memory has been allocated.
Fixes NULL pointers in AVPicture after a17a766190.
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
In some conditions, where the first band was being zeroed
mainly, the wrong global gain scalefactor would be written
to the stream since it's always taken from the first band
regardless of whether it's been marked as zero or not.
So, always make sure it contians something useful.
When both M/S coding and PNS are enabled, scalefactors
and coding books would be mistakenly clobbered when setting
the M/S flag on PNS'd bands. The flag needs to be set to
signal the generation of correlated noise, but the scalefactors,
coefficients and the coding books need to be kept intact.
Commit 14ea4151d7 had a bug in that the
conversion of the uint64_t result to an int (the return signature) would
lead to implementation defined behavior, and in this case simply
returned 0 for NAN. A fix via AND'ing the result with 1 does the trick,
simply by ensuring a 0 or 1 return value.
Patch tested with FATE on x86-64, GNU/Linux by forcing the compatibility
code via an ifdef hack suggested by Michael.
Signed-off-by: Ganesh Ajjanagadde <gajjanagadde@gmail.com>
lrintf is anyway used, suggesting we only care up to floating precision.
Rurthermore, there is a compat hack in avutil/libm for this function,
and it is used in avcodec/aacps_tablegen.h.
This yields a non-negligible speedup. Sample benchmark:
x86-64, Haswell, GNU/Linux:
old (draw_mandelbrot):
274635709 decicycles in draw_mandelbrot, 256 runs, 0 skips
300287046 decicycles in draw_mandelbrot, 512 runs, 0 skips
371819935 decicycles in draw_mandelbrot, 1024 runs, 0 skips
336663765 decicycles in draw_mandelbrot, 2048 runs, 0 skips
581851016 decicycles in draw_mandelbrot, 4096 runs, 0 skips
new (draw_mandelbrot):
269882717 decicycles in draw_mandelbrot, 256 runs, 0 skips
296359285 decicycles in draw_mandelbrot, 512 runs, 0 skips
370076599 decicycles in draw_mandelbrot, 1024 runs, 0 skips
331478354 decicycles in draw_mandelbrot, 2048 runs, 0 skips
571904318 decicycles in draw_mandelbrot, 4096 runs, 0 skips
Reviewed-by: Michael Niedermayer <michael@niedermayer.cc>
Signed-off-by: Ganesh Ajjanagadde <gajjanagadde@gmail.com>
This option can be used to select useful frames from an ffconcat file which is
using inpoints and outpoints but where the source files are not intra frame
only.
Reviewed-by: Stefano Sabatini <stefasab@gmail.com>
Signed-off-by: Marton Balint <cus@passwd.hu>
If duration is still AV_NOPTS_VALUE when opening the next file, we can assume
that outpoint is not set.
Reviewed-by: Nicolas George <george@nsup.org>
Signed-off-by: Marton Balint <cus@passwd.hu>
Fixes out of array access
Fixes: 1430e9c43fae47a24c179c7c54f94918/signal_sigsegv_421427_2049_f2192b6829ab6e0eefcb035329c03c60.264
Found-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
SGI RLE encoding is slighlty different than the one provided by rle
module (especially at high bit depth). The pixel count function however
does not change, so it is simply made library-public.
This is never mentioned in the specifications, and decoders work
just as fine without it. Update the fate references since the compressed
file is smaller.
Signed-off-by: Vittorio Giovara <vittorio.giovara@gmail.com>
There is no such thing as a slice structured mode in the original version 1 H.263,
that mode was added in H.263+ in 1998. Also the headers for slice structured mode
are not part of the older version 1 and this would result in unplayable files
An alternative to this patch would be to merge the H263 and H263P AVCodecs and use
other means to distinguish the older and newer versions.
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
VP8E_UPD_ENTROPY, VP8E_UPD_REFERENCE, VP8E_USE_REFERENCE were removed
from libvpx and the remaining values were never used here
Reviewed-by: Michael Niedermayer <michael@niedermayer.cc>
Signed-off-by: James Zern <jzern@google.com>
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
The demuxer returned INVALIDDATA and failed to demux the remaining data
when an invalid stream index was read, now it just skips the asf packet
for the stream with an invalid stream index and continues demuxing.
Reported-By: Hendrik Leppkes
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
The auxiliary data length field is not reliable,
and incorrect overread errors could be returned
for valid, real-world bitstreams.
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
This actually fixes an incorrect float literal. It is believed by
examining the precision that the literals were all pre-computed as
floats, resulting in this needless loss of precision. There is no
benefit to keeping such reduced precision:
1. These constants are used for static array computation, hence
compile-time.
2. They will be treated as doubles anyway, since f specifier was not
present.
Signed-off-by: Ganesh Ajjanagadde <gajjanagadde@gmail.com>
This uses M_SQRT1_2, M_SQRT2 instead of the actual literals. This yields
greater precision in some places in avcodec/ac3, while fixed point
values remain unchanged.
Reviewed-by: Clément Bœsch <u@pkh.me>
Signed-off-by: Ganesh Ajjanagadde <gajjanagadde@gmail.com>
This uses M_SQRT1_2, M_SQRT2 instead of the actual literals. Fixed point
values remain unchanged.
Patch tested with FATE on x86.
Signed-off-by: Ganesh Ajjanagadde <gajjanagadde@gmail.com>
* commit '4d8f536b535487063a08609636e712ad86d2ad54':
qsvenc: print the actual video parameters used by MSDK
Merged-by: Derek Buitenhuis <derek.buitenhuis@gmail.com>
* commit 'f6c94457b44f41d900cd0991857f54e1f0ccedd6':
mpegvideo_enc: enable rtp_mode when multiple slices are used
Merged-by: Derek Buitenhuis <derek.buitenhuis@gmail.com>
* commit '79ae1e630b476889c251fc905687a3831b43ab5e':
avcodec: Define side data type for fallback track
Merged-by: Derek Buitenhuis <derek.buitenhuis@gmail.com>
* commit '21ab6fd01b9107d7171fc1a77c2bfacff845a97a':
lavf: document that passing valid timestamps to muxers is now mandatory
Merged-by: Derek Buitenhuis <derek.buitenhuis@gmail.com>
These are all no-ops.
* commit '9fd2bf09dbc630484d9e88a1d27f7e8508b70a2c':
hqx: correct type and size check of info_offset
dds: disable palette flag for compressed images
segafilm: Fix current_sample after seeking and avio_seek return type
Merged-by: Derek Buitenhuis <derek.buitenhuis@gmail.com>
* commit '62b4a6f1b9aa83d56701af226adda98faa5ede09':
rtmpcrypt: Provide the xtea keys in little endian format for consistency
Merged-by: Derek Buitenhuis <derek.buitenhuis@gmail.com>
* commit '588b6215b4c74945994eb9636b0699028c069ed2':
rtmpcrypt: Do the xtea decryption in little endian mode
xtea: Add functions for little endian mode
Conflicts:
libavutil/xtea.c
Merged-by: Derek Buitenhuis <derek.buitenhuis@gmail.com>
MSYS, as per cygwin, by default uses a custom posix abstraction
in the form of a "msys2.dll". Programs build that way are harder to
distribute and use.
MSYS2 provides alternate launcher scripts that provide a MINGW
environment nearly out of box.
This improves the mathematical behavior of hypotenuse computation.
Reviewed-by: Michael Niedermayer <michael@niedermayer.cc>
Signed-off-by: Ganesh Ajjanagadde <gajjanagadde@gmail.com>
It is known that the naive sqrt(x*x + y*y) approach for computing the
hypotenuse suffers from overflow and accuracy issues, see e.g
http://www.johndcook.com/blog/2010/06/02/whats-so-hard-about-finding-a-hypotenuse/.
This adds hypot support to FFmpeg, a C99 function.
On platforms without hypot, this patch does a reaonable workaround, that
although not as accurate as GNU libm, is readable and does not suffer
from the overflow issue. Improvements can be made separately.
Reviewed-by: Michael Niedermayer <michael@niedermayer.cc>
Signed-off-by: Ganesh Ajjanagadde <gajjanagadde@gmail.com>
isnan and isinf are actually macros as per the standard. In particular,
the existing implementation has incorrect signature. Furthermore, this
results in undefined behavior for e.g double values outside float range
as per the standard.
This patch corrects the undefined behavior for all usage within FFmpeg.
Note that long double is not handled as it is not used in FFmpeg.
Furthermore, even if at some point long double gets used, it is likely
not needed to modify the macro in practice for usage in FFmpeg. See
below for analysis.
Getting long double to work strictly per the spec is significantly harder
since a long double may be an IEEE 128 bit quad (very rare), 80 bit
extended precision value (on GCC/Clang), or simply double (on recent Microsoft).
On the other hand, any potential future usage of long double is likely
for precision (when a platform offers extra precision) and not for range, since
the range anyway varies and is not as portable as IEEE 754 single/double
precision. In such cases, the implicit cast to a double is well defined
and isinf and isnan should work as intended.
Reviewed-by: Michael Niedermayer <michael@niedermayer.cc>
Signed-off-by: Ganesh Ajjanagadde <gajjanagadde@gmail.com>
Doing that doesn't make sense, because the only purpose of sbr_dequant
is to process the data from read_sbr_data.
Reviewed-by: Michael Niedermayer <michael@niedermayer.cc>
Signed-off-by: Andreas Cadhalpun <Andreas.Cadhalpun@googlemail.com>
This function returns the encoded data of a frame, one slice at a time
directly when that slice is encoded, instead of waiting for the full
frame to be done. However this field has a debatable usefulness, since
it looks like it is just a convoluted way to get data at lowest
possible latency, or a somewhat hacky way to store h263 in RFC-2190
rtp encapsulation.
Moreover when multi-threading is enabled (which is by default) the order
of returned slices is not deterministic at all, making the use of this
function not reliable at all (or at the very least, more complicated
than it should be).
So, for the reasons stated above, and being used by only a single encoder
family (mpegvideo), this field is deemed unnecessary, overcomplicated,
and not really belonging to libavcodec. Libavformat features a complete
implementation of RFC-2190, for any other case.
Signed-off-by: Vittorio Giovara <vittorio.giovara@gmail.com>
server_attached is newly added so the demuxer knows if there is an attached server
that can update the write index. This is needed to fix a infinite loop
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
The ad-hoc pi constant has a ludicrous number of digits that offer no
value whatsoever. M_PI is more consistent and readable across the
codebase.
Reviewed-by: Paul B Mahol <onemda@gmail.com>
Reviewed-by: Nicolas George <george@nsup.org>
Signed-off-by: Ganesh Ajjanagadde <gajjanagadde@gmail.com>
If videotoolbox_common_end_frame failed, then the AVFrame was returned
to the API user with the dummy buffer (in AVFrame.buf[0]) still set, and
the decode call indicating success.
These "half-set" AVFrames with dummy buffer are a videotoolbox specific
hack, because the decoder requires an allocated AVFrame for its internal
logic. Videotoolbox on the other hand allocates its frame itself
internally, and outputs it only on end_frame. At this point, the dummy
buffer is replaced with the real frame (unless decoding fails).
Currently, multiple slices with just one thread produce corrupted
output.
Additionally, enable slice structured mode for h263(+)
Bug-Id: 912
CC: libav-stabl@libav.org
It is used as size argument of ff_canopus_parse_info_tag, which uses it
as size argument to bytestream2_init, which only supports sizes up to
INT_MAX.
Changing it's type to unsigned simplifies the check.
Reviewed-by: Vittorio Giovara <vittorio.giovara@gmail.com>
Signed-off-by: Andreas Cadhalpun <Andreas.Cadhalpun@googlemail.com>
* commit '1fc94724f1fd52944bb5ae571475c621da4b77a0':
xtea: Clarify that the current API works in big endian mode
Merged-by: Derek Buitenhuis <derek.buitenhuis@gmail.com>
This allows removing a special case for the fixed point decoder and will
make error checks simpler
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Previously only the edit_rate of material_track was checked.
If it's negative, it causes assertion failures in av_rescale_rnd.
Reviewed-by: Tim Nicholson <nichot20-at-yahoo.com@ffmpeg.org>
Signed-off-by: Andreas Cadhalpun <Andreas.Cadhalpun@googlemail.com>
In case of bitstream errors the deblock filter and slices can access uninitialized
top_borders from previous slices which did not fill them as they stoped halfway due
to error or where entirely missing.
This also makes code using these tables deterministic in case of missing or damaged
slices
Found-by: Tyson Smith
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
This is a no-op.
* commit '5f2c8315b3c1b28da0386fddb118ad6a0ed77a0c':
thp: set duration for audio stream too
Merged-by: Derek Buitenhuis <derek.buitenhuis@gmail.com>
* commit '1d62ee38894afb696674db78cee8f8d89204a8fe':
movenc: Add a unit test for signaling of the track start times
Merged-by: Derek Buitenhuis <derek.buitenhuis@gmail.com>
This way, it never starts with 0xFFF0, and never trips the
ADTS "Detection" code in movenc.c.
Signed-off-by: Derek Buitenhuis <derek.buitenhuis@gmail.com>
DASH manifest should have framerate specified as an attribute in the
AdaptationSet element and Representation elements. Though ISO/IEC
23009-1:2014 doesn't seem to define frameRate as a required attribute,
it is at least optional, and DASH-IF IOP 3.0 seems to require it. See
section 3.2.4 of http://dashif.org/w/2015/04/DASH-IF-IOP-v3.0.pdf
In the event that avg_frame_rate is not set in the muxer, we ignore the
frameRate tag altogther.
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
This feature allows making associations between audio tracks
that apple players recognize. E.g. when an ac3 track has a
tref that points to an aac track, devices that don't support
ac3 will automatically fall back to the aac track.
Apple used to *guess* these associations, but new products
(AppleTV 4) no longer guess and this association can only
be made explicitly now using the "fall" tref.
Signed-off-by: Anton Khirnov <anton@khirnov.net>
This side data type is meant to be added to AVStream side data.
A fallback track indicates an alternate track to use when the
current track can not be decoded for some reason. e.g. no
decoder available for codec.
Signed-off-by: Anton Khirnov <anton@khirnov.net>
In the spirit of commit 8199908fdf, likely
typo originally.
Found by enabling -Wparentheses on clang 3.7 and running a manual audit.
To the best of my knowledge, no such instances remain.
Reviewed-by: Michael Niedermayer <michael@niedermayer.cc>
Signed-off-by: Ganesh Ajjanagadde <gajjanagadde@gmail.com>
Unrecognized streams are not allocated
Fixes: flicker-1.color1.vp91447030769.08.webm
Found-by: Chris Cunningham <chcunningham@google.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
* commit '3eeb7edfc2a1157b7b0e0ce21ac2cd44d55d405b':
movenc: Add a unit test for frag_discont with edit lists
Merged-by: Derek Buitenhuis <derek.buitenhuis@gmail.com>
All diferences in unit tests have been acounted for.
* commit '59e8ec0aa8ab174701d01a3bfe96fedd0b7fcead':
movenc: Add an API unit test for fragmenting options/calls
Merged-by: Derek Buitenhuis <derek.buitenhuis@gmail.com>
This is possibly undefined behavior based on sequence point rules, but I
have not studied the spec at that level of detail.
Fixes: CID 1338321.
Reviewed-by: Michael Niedermayer <michael@niedermayer.cc>
Signed-off-by: Ganesh Ajjanagadde <gajjanagadde@gmail.com>
FFv1 uses two types of coders, golomb and range with two different
tables. This is exposed this in a rather convoluted way, for example
mentioning to set coder type 1 while initializing the variable 'ac' to 2,
because encoder does not use range coder with default table.
Appropriate internal coder type values have been added and used in any
check rather than using raw numbers.
Initialization of avctx.coder_type in ffv1dec is removed because this
field is encoder only. An unneeded validation check in the encoder
is dropped too.
Signed-off-by: Vittorio Giovara <vittorio.giovara@gmail.com>
It is used as size argument of ff_canopus_parse_info_tag, which uses it
as size argument to bytestream2_init, which only supports sizes up to
INT_MAX.
Changing it's type to unsigned simplifies the check.
Signed-off-by: Andreas Cadhalpun <Andreas.Cadhalpun@googlemail.com>
Small refactor of fps code for improved readability. In particular
the "cor" variable was unnecessary and misleading because it would
always be set to -delta0.
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Fixes potential integer overflows
Fixes: 03e0abe721b1174856d41a1eb5d6a896/signal_sigabrt_7ffff6ae7cc9_3813_e71bf3541abed3ccba031cd5ba0269a4.avi
This fix is choosen to be simple to backport, better solution
for master is planed
Found-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Fixes assertion failure
Fixes: 03e0abe721b1174856d41a1eb5d6a896/signal_sigabrt_7ffff6ae7cc9_3813_e71bf3541abed3ccba031cd5ba0269a4.avi
This fix is choosen to be simple to backport, better solution
for master is planed
Found-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Fixes a mpegts file with hevc that fails estimating duration. Increasing number of
retries fixes the issue.
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Fixes out of array access
Fixes: ce19e41f0ef1e52a23edc488faecdb58/asan_heap-oob_2504e97_4202_ffa0df1baed14022b9bfd4f8ac23d0cb.smk
Found-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
The function is renamed to ff_rint64_clip()
This should avoid build failures on VS2012
Feel free to changes this to a different solution
Reviewed-by: James Almer <jamrial@gmail.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Fixes out of array read
Fixes: cb3f38b08b4541523974667c7d1eee9e/asan_heap-oob_2659e18_9838_021fd5cd635bf76cede6398cd9ecbcdd.tak
Found-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Fixes out of array read
Fixes: c50c4aa6cefda71b19a31ea12302980c/asan_heap-oob_12be5fd_7011_33ebd015a74976215934add72b9c8352.avi
Found-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
The height of tables can be rounded up for MBAFF but this does not imply that is also true
for the previous frames
Fixes out of array reads
Fixes: c106b36fa36db8ff8f3ed0c82be7bea2/asan_heap-oob_32699f0_6321_467b9a1d7e03d7cfd310b7e65dc53bcc.mov
Found-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Fixes out of array read
Fixes: 7fcd09eadd046e326d8ea0af66f166c8/asan_heap-oob_4a52e5_2273_fa6078a10dd575df266fb1e0b4114cd5.avi
Found-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
M_SQRT2 is defined in math.h, or in avutil/mathematics.h for
compatibility hacks. This uses this value instead of a floating literal.
Fixed point values produced by C_FIX(), R_FIX() remain identical.
Reviewed-by: Michael Niedermayer <michael@niedermayer.cc>
Signed-off-by: Ganesh Ajjanagadde <gajjanagadde@gmail.com>
M_SQRT2 is defined in math.h, or in avutil/mathematics.h for
compatibility hacks. This uses this value instead of an ad-hoc define.
Fixed point values produced by FIX() remain identical.
Reviewed-by: Michael Niedermayer <michael@niedermayer.cc>
Signed-off-by: Ganesh Ajjanagadde <gajjanagadde@gmail.com>
M_PI is defined in math.h, or in avutil/mathematics.h for compatibility
hacks. This uses this value instead of an ad-hoc floating literal.
Reviewed-by: Michael Niedermayer <michael@niedermayer.cc>
Signed-off-by: Ganesh Ajjanagadde <gajjanagadde@gmail.com>
M_E is defined in math.h, or in avutil/mathematics.h for compatibility
hacks. This uses this value instead of an ad-hoc define.
Reviewed-by: Michael Niedermayer <michael@niedermayer.cc>
Signed-off-by: Ganesh Ajjanagadde <gajjanagadde@gmail.com>
Fixes out of array read
Fixes: 61cf123c081ee2bb774d307c75bdb99e/asan_heap-oob_1224f76_5546_bee833ffae73f752b489b9eeaac52db7.dpx
Found-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
This implementation does not support TLS listen sockets and loading
CA/Certs from files.
The Windows API does not support loading PEM certs, and would either
require a manual loader or instead be limited to loading Windows PFX
certificates
TLS listen sockets would have to be implemented quite separately, as many
of the APIs are different for server-mode (as opposed to client mode).
Fixes out of array read
Fixes: 3c857d4d90365731524716e6d051e43a/signal_sigsegv_7f4f59bcc29e_1386_20abd2c8e655cb9c75b24368e65fe3b1.flv
Found-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Fixes out of array read
Fixes: 20dd01398dee0f6d83d7e5410a2ae8eb/signal_sigsegv_39eeb1f_4001_62efbdf1c60748dabf1ec310b59525fd.mov
Found-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
The rationale for this function is reflected in the documentation for
it, and is copied here:
Clip a double value into the long long amin-amax range.
This function is needed because conversion of floating point to integers when
it does not fit in the integer's representation does not necessarily saturate
correctly (usually converted to a cvttsd2si on x86) which saturates numbers
> INT64_MAX to INT64_MIN. The standard marks such conversions as undefined
behavior, allowing this sort of mathematically bogus conversions. This provides
a safe alternative that is slower obviously but assures safety and better
mathematical behavior.
API:
@param a value to clip
@param amin minimum value of the clip range
@param amax maximum value of the clip range
@return clipped value
Note that a priori if one can guarantee from the calling side that the
double is in range, it is safe to simply do an explicit/implicit cast,
and that will be far faster. However, otherwise this function should be
used.
avutil minor version is bumped.
Reviewed-by: Ronald S. Bultje <rsbultje@gmail.com>
Signed-off-by: Ganesh Ajjanagadde <gajjanagadde@gmail.com>
The XTEA algorithm operates on 32 bit numbers, not on byte sequences.
The XTEA implementation in libavutil is written assuming big endian
numbers, while the rtmpe signature encryption assumes little endian.
This fixes rtmpe communication with rtmpe servers that use signature
type 8 (XTEA), e.g. crunchyroll.
Signed-off-by: Martin Storsjö <martin@martin.st>
When async issues its inner seek via ffurl_seek, it treats failures as
EOF being reached. This is not consistent with the behavior of other
protocols (e.g. http, cache) which continue to tolerate reads after
failed seeks, and therefore does not interact correctly with them.
A common pattern where this manifests itself is where avio_seek is
called with pos to be the end-of-file - the http range-request would
fail here, and async would set io_eof_reached to 1. The background
thread would then refuse to read more bytes, and subsequent reads would
only empty the fifo and end in an error.
Presumably the code may have expected subsequent seeks to unset the
io_eof_reached but this is not guaranteed to be true - a subsequent seek
that lands in the AVIOContext's buffer (the fact that the
previously-failed avio_seek leaves the AVIOContext's buffer intact also
suggests that follow-up reads are expected to be tolerated) would not be
issued to the async_seek function, and when that buffer is drained only
async_read calls would follow, leading to the same error just described.
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Just realized my previous patch doesn't work quite right. I uploaded a better
sample file that actually has visible captions to /incoming/hevc_cc.ts. I
tested with that file doing hevc->x264 and it works.
This is basically an exact copy of the existing h264 logic.
Signed-off-by: Will Kelleher <wkelleher@gogoair.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
This adds msvc optimisations as well as fixing an error in icl whereby it will generate invalid code otherwise.
Signed-off-by: Matt Oliver <protogonoi@gmail.com>
Some entries might be either empty or contain types we do not parse
(eg. 'url '). In both cases, if an 'alis' is not the first entry,
external references are not loaded, so make sure that the array starts
with an 'alis' dref.
Rather than reading the alternate absolute path version from dref
type 18, make sure that 0s are considered as '/'. These values are
sometimes present in the full path, and are mistakenly interpreted as
line terminators othewise.
With the correct handling of this dref type, parsing type 18 is not
needed any more.
By writing a zero-sized packet, the caller can communicate the
start_dts/start_cts for the stream without actually writing
the first packet.
This allows doing random-access writing of fragments when the
start dts of the stream isn't zero, so that the edit list in the moov
is written based on timestamps from the nominal start time signaled
via the zero-sized packet, while the first proper packet written
corresponds to a later fragment.
To avoid potential unexpected behaviour, empty packets only set
start_dts if the frag_discont flag is set.
Signed-off-by: Martin Storsjö <martin@martin.st>
This allows producing fragments discontinously where the video
stream has b-frames (but starts at pts=0), but doesn't work for the
cases with audio with preroll.
Signed-off-by: Martin Storsjö <martin@martin.st>
This prevents various values from getting an insanely huge exponent.
If someone knows a cleaner solution, thats welcome!
This is similar to commit 8978c74 for aacsbr.
Reviewed-by: Michael Niedermayer <michael@niedermayer.cc>
Signed-off-by: Andreas Cadhalpun <Andreas.Cadhalpun@googlemail.com>
I didnt find any case that triggers this but if it gets triggered it needs to be
investigated
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
a set ost->frame_rate does not imply CFR in ffmpeg
The changed fate tests had all wrong packet durations
(like 1/1000 or 1/90000)
There might be more cases in which is_cfr could be set
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
* commit '8ad5124b7ecf7f727724e270a7b4bb8c7bcbf6a4':
movenc: Automatically flush after writing the initial moov
Merged-by: Hendrik Leppkes <h.leppkes@gmail.com>
ICC versions older than atleast 12.1.6 dont have the tzcnt intrinsics.
Reviewed-by: Michael Niedermayer <michael@niedermayer.cc>
Signed-off-by: Matt Oliver <protogonoi@gmail.com>
Chapter-indexing can be expensive since chapters may be interspersed
throughout the entire file and may require many seeks - especially
costly when consuming a video over a remote protocol like http.
Furthermore it is often unnecessary, especially when only trying to get
video info (e.g. via ffprobe).
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Also support disabling them as they seem to cause problems to some
Users. They are also not allowed in IRT D-10 thus the default for
mxf_d10 is not to write them
This also decreases the filesize when no user comment are stored
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
this fixes the return code of avcodec_decode_video2 for gif decoding
and the gif frame data buffer is skipped properly
Reviewed-by: Paul B Mahol <onemda@gmail.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Contrary to the normal fate tests that run via avconv, this tests
nontrivial call sequences that are only doable via the API
(mainly for different corner cases when using the muxer for
segmenting).
The test muxes fake packet data (with extradata that looks
enough like proper data to make the file be viewable with e.g.
boxdumper) and checks the hash of the produced files. The test also
verifies that fragments produced via different call sequences remain
identical (to avoid e.g. updating the output hashes and suddenly
having fragments that used to be identical suddenly diverging), for
fragments written with frag_discont and/or delay_moov.
Signed-off-by: Martin Storsjö <martin@martin.st>
In most other cases when writing fragmented mp4 files, the output
IO context is flushed after each fragment. Also flush it after
writing the initial moov, to have it behave in the same way.
Signed-off-by: Martin Storsjö <martin@martin.st>
* commit '3efd71b4d0b4a73ccbbbdc092e6bbd54d92633f4':
avconv: set packet duration for CFR video streams
Merged-by: Hendrik Leppkes <h.leppkes@gmail.com>
* commit 'a0c71a575109f123978e345fa7eb4ac03cd4d3c3':
lavf: initialize cur_dts to AV_NOPTS_VALUE for muxing
Merged-by: Hendrik Leppkes <h.leppkes@gmail.com>
* commit 'e2854e731f843906d9a9a5b882bed872341999fd':
avresample: Document avresample_open() a little better
Merged-by: Hendrik Leppkes <h.leppkes@gmail.com>
* commit '50d2a3b5f34e6f99e5ffe17f2be5eb1815555960':
flashsv: Initialize the block array
Not merged, blocks are already zeroed when appropriate.
Merged-by: Hendrik Leppkes <h.leppkes@gmail.com>
* commit '60f50374f1955442dc987abc4a6c61c2109620c2':
rpza: Check the blocks left before processing one
Merged-by: Hendrik Leppkes <h.leppkes@gmail.com>
* commit '1e7ff5ac6923996f7292c82f102c68384fbc9d97':
nut: Use the correct codec_tag when multiple are available
Not merged since ffnutenc handles the codec_tag differently
Merged-by: Hendrik Leppkes <h.leppkes@gmail.com>
Fixes compilation of host tool aacps_fixed_tablegen.
Reviewed-by: Michael Niedermayer <michael@niedermayer.cc>
Signed-off-by: James Almer <jamrial@gmail.com>
Fixes apparent mmal_port_disable() freezes in ffmmal_stop_decoder() when
calling ffmmal_decode() with flush semantics a large number of times in
a row.
The CMP variable seems to have been inherited from fate-api-seek which set it to null
the mxf reference needed a change due to c7e14a279f
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Somewhat ironic that this "safe" interface is actually being used
unsafely here. This fixes the usage preventing potential null pointer
dereference, where the old code was doubly broken: ctime can return
NULL, and ctime can return an arbitrarily long buffer.
Reviewed-by: Mark Harris <mark.hsj@gmail.com>
Reviewed-by: Michael Niedermayer <michael@niedermayer.cc>
Signed-off-by: Ganesh Ajjanagadde <gajjanagadde@gmail.com>
This may be a slightly surprising optimization, but is actually based on
an understanding of how math libraries compute trigonometric functions.
Explanation is given here so that future development uses libm more effectively
across the codebase.
All libm's essentially compute transcendental functions via some kind of
polynomial approximation, be it Taylor-Maclaurin or Chebyshev.
Correction terms are added via polynomial correction factors when needed
to squeeze out the last bits of accuracy. Lookup tables are also
inserted strategically.
In the case of trigonometric functions, periodicity is exploited via
first doing a range reduction to an interval around zero, and then using
some polynomial approximation.
This range reduction is the most natural way of doing things - else one
would need polynomials for ranges in different periods which makes no
sense whatsoever.
To avoid the need for the range reduction, it is helpful to feed in
arguments as close to the origin as possible for the trigonometric
functions. In fact, this also makes sense from an accuracy point of view:
IEEE floating point has far more resolution for small numbers than big ones.
This patch does this for the Blackman-Nuttall filter, and yields a
non-negligible speedup.
Sample benchmark (x86-64, Haswell, GNU/Linux)
test: fate-swr-resample-dblp-2626-44100
old:
18893514 decicycles in build_filter (loop 1000), 256 runs, 0 skips
18599863 decicycles in build_filter (loop 1000), 512 runs, 0 skips
18445574 decicycles in build_filter (loop 1000), 1000 runs, 24 skips
new:
16290697 decicycles in build_filter (loop 1000), 256 runs, 0 skips
16267172 decicycles in build_filter (loop 1000), 512 runs, 0 skips
16251105 decicycles in build_filter (loop 1000), 1000 runs, 24 skips
Reviewed-by: Michael Niedermayer <michael@niedermayer.cc>
Signed-off-by: Ganesh Ajjanagadde <gajjanagadde@gmail.com>
When upsampling, factor is set to 1 and sines need to be evaluated only
once for each phase, and the complexity should not depend on the number
of filter taps. This does the desired precomputation, yielding
significant speedups. Hard guarantees on the gain are not possible, but gains
themselves are obvious and are illustrated below.
Sample benchmark (x86-64, Haswell, GNU/Linux)
test: fate-swr-resample-dblp-2626-44100
old:
29161085 decicycles in build_filter (loop 1000), 256 runs, 0 skips
28821467 decicycles in build_filter (loop 1000), 512 runs, 0 skips
28668201 decicycles in build_filter (loop 1000), 1000 runs, 24 skips
new:
14351936 decicycles in build_filter (loop 1000), 256 runs, 0 skips
14306652 decicycles in build_filter (loop 1000), 512 runs, 0 skips
14299923 decicycles in build_filter (loop 1000), 1000 runs, 24 skips
Note that this does not statically allocate the sin lookup table. This
may be done for the default 1024 phases, yielding a 512*8 = 4kB array
which should be small enough.
This should yield a small improvement. Nevertheless, this is separate from
this patch, is more ambiguous due to the binary increase, and requires a
lut to be generated offline.
Reviewed-by: Michael Niedermayer <michael@niedermayer.cc>
Signed-off-by: Ganesh Ajjanagadde <gajjanagadde@gmail.com>
Fixes a segfault when trying to write nonexistent rtp information.
Signed-off-by: Simon Thelen <ffmpeg-dev@c-14.de>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
cache protocol indexes its cache using AVTreeNodes which require a cmp
function for inserting and searching new cache-entries. This cmp
function expects a 32-bit int return value (negative, zero, or positive)
but the cache cmp function returns an int64_t which can overflow the
int, giving negative numbers for when it should be positive, vice versa.
This manifests itself only for very large files (e.g. 4GB+)
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
All encoders set pts and dts properly now (and have been doing that for
a while), so there is no good reason to do any timestamp guessing in the
muxer.
The newly added AVStreamInternal will be later used for storing all the
private fields currently living in AVStream.
This improves accuracy for the bessel function at large arguments, and this in turn
should improve the quality of the Kaiser window. It also improves the
performance of the bessel function and hence build_filter by ~ 20%.
Details are given below.
Algorithm: taken from the Boost project, who have done a detailed
investigation of the accuracy of their method, as compared with e.g the
GNU Scientific Library (GSL):
http://www.boost.org/doc/libs/1_52_0/libs/math/doc/sf_and_dist/html/math_toolkit/special/bessel/mbessel.html.
Boost source code (also cited and licensed in the code):
https://searchcode.com/codesearch/view/14918379/.
Accuracy: sample values may be obtained as follows. i0 denotes the old bessel code,
i0_boost the approach here, and i0_real an arbitrary precision result (truncated) from Wolfram Alpha:
type "bessel i0(6.0)" to reproduce. These are evaluation points that occur for
the default kaiser_beta = 9.
Some illustrations:
bessel(8.0)
i0 (8.000000) = 427.564115721804739678191254
i0_boost(8.000000) = 427.564115721804796521610115
i0_real (8.000000) = 427.564115721804785177396791
bessel(6.0)
i0 (6.000000) = 67.234406976477956163762428
i0_boost(6.000000) = 67.234406976477970374617144
i0_real (6.000000) = 67.234406976477975326188025
Reason for accuracy: Main accuracy benefits come at larger bessel arguments, where the
Taylor-Maclaurin method is not that good: 23+ iterations
(at large arguments, since the series is about 0) can cause
significant floating point error accumulation.
Benchmarks: Obtained on x86-64, Haswell, GNU/Linux via a loop calling
build_filter 1000 times:
test: fate-swr-resample-dblp-44100-2626
new:
995894468 decicycles in build_filter(loop 1000), 256 runs, 0 skips
1029719302 decicycles in build_filter(loop 1000), 512 runs, 0 skips
984101131 decicycles in build_filter(loop 1000), 1024 runs, 0 skips
old:
1250020763 decicycles in build_filter(loop 1000), 256 runs, 0 skips
1246353282 decicycles in build_filter(loop 1000), 512 runs, 0 skips
1220017565 decicycles in build_filter(loop 1000), 1024 runs, 0 skips
A further ~ 5% may be squeezed by enabling -ftree-vectorize. However,
this is a separate issue from this patch.
Reviewed-by: Michael Niedermayer <michael@niedermayer.cc>
Signed-off-by: Ganesh Ajjanagadde <gajjanagadde@gmail.com>
Kaiser windows inherently don't require beta to be an integer. This was
an arbitrary restriction. Moreover, soxr does not require it, and in
fact often estimates beta to a non-integral value.
Thus, this patch allows greater flexibility for swresample clients.
Micro version is updated.
Reviewed-by: Derek Buitenhuis <derek.buitenhuis@gmail.com>
Reviewed-by: Michael Niedermayer <michael@niedermayer.cc>
Signed-off-by: Ganesh Ajjanagadde <gajjanagadde@gmail.com>
Otherwise v=INT_MIN doesn't get normalized and thus triggers av_assert2
in other functions.
Reviewed-by: Michael Niedermayer <michael@niedermayer.cc>
Signed-off-by: Andreas Cadhalpun <Andreas.Cadhalpun@googlemail.com>
The correct result can't be expressed in SoftFloat.
Currently it returns a random value from an out of bounds read.
Reviewed-by: Michael Niedermayer <michael@niedermayer.cc>
Signed-off-by: Andreas Cadhalpun <Andreas.Cadhalpun@googlemail.com>
The assert in ffmmal_stop_decoder() could trigger sometimes. The
packets_buffered counter was indeed not correctly maintained, and
packets were not subtracted from it if they were still in the waiting
queue.
For some reason, this happened especially with VC-1.
Trim unneeded leading components and trailing zeros.
Move the formating code in a separate function.
Use the function also to format the default value, it was currently
printed as plain integer, inconsistent to the way it is parsed.
Similar to testsrc, but using drawutils and therefore
supporting a lot of pixel formats instead of just rgb24.
This allows using it as input for other tests without
requiring a format conversion.
It is also slightly faster than testsrc for some reason.
The buffer needs s->bpp bytes, at maximum currently 10.
Assert that s->bpp is not larger.
This fixes a stack buffer overflow.
Reviewed-by: wm4 <nfxjfg@googlemail.com>
Reviewed-by: Paul B Mahol <onemda@gmail.com>
Signed-off-by: Andreas Cadhalpun <Andreas.Cadhalpun@googlemail.com>
The return type of strlen is size_t, i.e. unsigned, so if pd->buf_size
is 3, the right side overflows leading to a wrong result of the
comparison and subsequently a heap buffer overflow.
Reviewed-by: Paul B Mahol <onemda@gmail.com>
Signed-off-by: Andreas Cadhalpun <Andreas.Cadhalpun@googlemail.com>
Fixes out of array access
Fixes: b877a6b788a25c70e8b1d014f8628549/asan_heap-oob_1da2c3f_2324_5a1b329b0b3c4bb6b1d775660ac56717.r3d
Found-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Fixes out of array read
Fixes: a9502b60f4cecc19475382aee255f73c/asan_heap-oob_1e87fba_2548_a8ad47f6dde36644fe9cdc444d4632d0.sub
Found-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Fixes libavcodec/vdpau.c:282:5: warning:
"CONFIG_H263_VDPAU_HWACCEL" is not defined [-Wundef]
Removed in d35d0c723e.
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
This seems not to do anything any more since a long time, and removing
it avoids using uninitialized memory. Also change the error value
forwarding as done everywhere else.
Partly fixes: msan_uninit-mem_7fb7d24780d0_2744_R03T.CAK
Found-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
Signed-off-by: Vittorio Giovara <vittorio.giovara@gmail.com>
Calculation of x an y based on width and height did not work when
width == 0 or height == 0. "0" substitutes the input width and
height, but did so too late for x, y expression evaluation.
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
This uses the trigonometric double and triple angle formulae to avoid
repeated (expensive) evaluation of libc's cos().
Sample benchmark (x86-64, Haswell, GNU/Linux)
test: fate-swr-resample-dblp-44100-2626
old:
1104466600 decicycles in build_filter(loop 1000), 256 runs, 0 skips
1096765286 decicycles in build_filter(loop 1000), 512 runs, 0 skips
1070479590 decicycles in build_filter(loop 1000), 1024 runs, 0 skips
new:
588861423 decicycles in build_filter(loop 1000), 256 runs, 0 skips
591262754 decicycles in build_filter(loop 1000), 512 runs, 0 skips
577355145 decicycles in build_filter(loop 1000), 1024 runs, 0 skips
This results in small differences with the old expression:
difference (worst case on [0, 2*M_PI]), argmax 0.008:
max diff (relative): 0.000000000000157289807188
blackman_old(0.008): 0.000363951585488813192382
blackman_new(0.008): 0.000363951585488755946507
These are judged to be insignificant for the performance gain. PSNR to
reference file is unchanged up to second decimal point for instance.
Reviewed-by: Michael Niedermayer <michael@niedermayer.cc>
Signed-off-by: Ganesh Ajjanagadde <gajjanagadde@gmail.com>
Fixes out of array access
Fixes: 54e488b9da4abbceaf405d6492515697/asan_heap-oob_32769b0_160_a8755eb08ee8f9579348501945a33955.TIF
Found-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Fixes out of array access
Fixes: 24d05e8b84676799c735c9e27d97895e/asan_heap-oob_1b70f6a_2955_7c3652a7f370f9f3ef40642bc2c99bb2.bit
Found-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Fixes out of array read
Fixes: d92114d8c2a019b8a6e50cd2a7301b54/asan_heap-oob_26bf563_60_1d3420277533de9dbf8aba3f93af346f.avi
Found-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
This speeds up build_filter by ~ 50%. This gain should be pretty
consistent across all architectures and platforms.
Essentially, this relies on a observation that the filters have some
even/odd symmetry that may be exploited during the construction of the
polyphase filter bank. In particular, phases (scaled to [0, 1]) in [0.5, 1] are
easily derived from [0, 0.5] and expensive reevaluation of function
points are unnecessary. This requires some rather annoying even/odd
bookkeeping as can be seen from the patch.
I vaguely recall from signal processing theory more general symmetries allowing even greater
optimization of the construction. At a high level, "even functions"
correspond to 2, and one can imagine variations. Nevertheless, for the sake
of some generality and because of existing filters, this is all that is
being exploited.
Currently, this patch relies on phase_count being even or (trivially) 1,
though this is not an inherent limitation to the approach. This
assumption is safe as phase_count is 1 << phase_bits, and is hence a
power of two. There is no way for user API to set it to a nontrivial odd
number. This assumption has been placed as an assert in the code.
To repeat, this assumes even symmetry of the filters, which is the most common
way to get generalized linear phase anyway and is true of all currently
supported filters.
As a side note, accuracy should be identical or perhaps slightly better
due to this "forcing" filter symmetries leading to a better phase
characteristic. As before, I can't test this claim easily, though it may
be of interest.
Patch tested with FATE.
Sample benchmark (x86-64, Haswell, GNU/Linux):
test: swr-resample-dblp-44100-2626
new:
527376779 decicycles in build_filter(loop 1000), 256 runs, 0 skips
524361765 decicycles in build_filter(loop 1000), 512 runs, 0 skips
516552574 decicycles in build_filter(loop 1000), 1024 runs, 0 skips
old:
974178658 decicycles in build_filter(loop 1000), 256 runs, 0 skips
972794408 decicycles in build_filter(loop 1000), 512 runs, 0 skips
954350046 decicycles in build_filter(loop 1000), 1024 runs, 0 skips
Note that lower level optimizations are entirely possible, I focussed on
getting the high level semantics correct. In any case, this should
provide a good foundation.
Reviewed-by: Michael Niedermayer <michael@niedermayer.cc>
Signed-off-by: Ganesh Ajjanagadde <gajjanagadde@gmail.com>
Fixes: 04715144ba237443010554be0d05343f/asan_heap-oob_1eafc76_1737_c685b48041a563461839e4e7ab97abb8.jpg
Fixes out of array access
Found-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
When sbr->reset is set in encode_frame, a bunch of qsort calls might get made.
Thus, there is the potential of calling qsort whenever the spectral
contents change.
AV_QSORT is substantially faster due to the inlining of the comparison callback.
Thus, the increase in performance should be worth the increase in binary size.
Tested with FATE.
Reviewed-by: Rostislav Pehlivanov <atomnuker@gmail.com>
Signed-off-by: Ganesh Ajjanagadde <gajjanagadde@gmail.com>
Fixes: libavcodec/rawenc.c:64:40: warning: passing argument 3 of av_image_copy_to_buffer from incompatible pointer type [enabled by default]
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Fixes: libavcodec/vdpau.c:320:5: warning: "CONFIG_H263_VDPAU_HWACCEL" is not defined [-Wundef]
It was removed in d15adeacf3
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Fixes an issue where an int64_t ffurl_seek return-value was being stored
in an int (32-bit) "r" variable, leading to integer overflow when seeking
into a large file (>2GB), and ultimately a "Failed to perform internal
seek" error mesage.
To test, try running `ffprobe 'cache:http://<something>'` on a file that
is ~3GB large, whose moov atom is at the end of the file
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
this makes draw_bar faster
slightly different result with old version
check result (with ~3 minutes audio file):
old:
real 0m49.611s
user 0m49.260s
sys 0m0.073s
new:
real 0m47.606s
user 0m47.378s
sys 0m0.068s
PSNR between old and new:
yuv444p PSNR
y:109.519298 u:107.506485 v:104.746878
average:106.816074 min:99.167305 max:inf
yuv422p PSNR
y:109.519298 u:108.025801 v:104.489734
average:107.279817 min:98.007467 max:inf
yuv420p PSNR
y:109.519298 u:108.363875 v:105.290200
average:108.261511 min:97.461812 max:inf
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
FFDIFFSIGN was created explicitly for this purpose, since the common
return a - b idiom is unsafe regarding overflow on signed integers. It
optimizes to branchless code on common compilers.
FFDIFFSIGN also has the subjective benefit of being easier to read due
to lack of ternary operators.
Tested with FATE.
Things not covered by this are unsigned integers, for which overflows
are well defined, and also places where overflow is clearly impossible,
e.g an instance where the a - b was being done on 24 bit values.
Reviewed-by: Michael Niedermayer <michael@niedermayer.cc>
Reviewed-by: Clément Bœsch <u@pkh.me>
Signed-off-by: Ganesh Ajjanagadde <gajjanagadde@gmail.com>
This is of use for defining comparator callbacks. Common approaches like
return x-y are not safe due to the risks of overflow.
Furthermore, the (x > y) - (x < y) trick is optimized to branchless
code.
This also documents this macro accordingly.
Reviewed-by: Michael Niedermayer <michael@niedermayer.cc>
Signed-off-by: Ganesh Ajjanagadde <gajjanagadde@gmail.com>
There seems to be some typos in the log messages that are fixed by this.
Reviewed-by: Michael Niedermayer <michael@niedermayer.cc>
Signed-off-by: Ganesh Ajjanagadde <gajjanagadde@gmail.com>
I've got some m4a samples that had jpeg cover art marked as png. Since
these files were supposedly written by iTunes, and other software can
read it (e.g. clementine does), this should be worked around.
Since png has a very simple to detect header, while it's apparently a
real pain to detect jpeg in the general case, try to detect png and
assume jpeg otherwise. Not bothering with bmp, as I have no test case.
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
Avoids inheritance of file handles on Windows systems similar to the
O_CLOEXEC/FD_CLOEXEC flag on Linux.
Fixes file lock issues in Windows applications when a child process
is started with handle inheritance enabled (standard input/output
redirection) while a FFmpeg transcoding is running in the parent
process.
Links relevant to the subject:
https://msdn.microsoft.com/en-us/library/w7sa2b22.aspx
Describes the _wsopen() function and the O_NOINHERIT flag. File handles
opened by _wsopen() are inheritable by default.
https://msdn.microsoft.com/en-us/library/windows/desktop/ms682425%28v=vs.85%29.aspx
Describes handle inheritance when creating new processes. Handle
inheritance must be enabled (bInheritHandles = TRUE) e.g. when you want
to pass handles for stdin/stdout via lpStartupInfo.
Signed-off-by: Tobias Rapp <t.rapp@noa-audio.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
This converts the usage of strtod to av_strtod in order to unify and
make number parsing more consistent. This also adds support for SI
postfixes.
Reviewed-by: Michael Niedermayer <michael@niedermayer.cc>
Signed-off-by: Ganesh Ajjanagadde <gajjanagadde@gmail.com>
Some codecs use the codec_tag to signal specific information and
picking the first one would lead to a broken file.
Bug-Id: 883
CC: libav-stable@libav.org
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
* commit '407ac22322e5ce67996ec54ef619cafa4c9ceb78':
w32pthreads: Map MemoryBarrier to __sync_synchronize on mingw
Merged-by: Hendrik Leppkes <h.leppkes@gmail.com>
* commit 'a0562e531723923b632684c7b51a9dd584bf534f':
configure: Add a SONAME entry for the android target
Merged-by: Hendrik Leppkes <h.leppkes@gmail.com>
* commit '8487987b87a252963b27b6adfd82887ea5933918':
h264: Print user data SEI under normal debug verbosity
Merged-by: Hendrik Leppkes <h.leppkes@gmail.com>
* commit '1720791e36f9cc24c05efea5bb275ab52156ce50':
png: read and write stereo3d frame side data information
Merged-by: Hendrik Leppkes <h.leppkes@gmail.com>
* commit '00b62968d079e63bf22028f253ac297292436ebe':
os_support: Don't try to return the service name as a string in getnameinfo
Merged-by: Hendrik Leppkes <h.leppkes@gmail.com>
* commit '567ca142952c5be57e52c149c815dfe5d6ac6d41':
configure: Add -D_CRT_NONSTDC_NO_WARNINGS when building with msvc
Merged-by: Hendrik Leppkes <h.leppkes@gmail.com>
The size of decoding map can differ from one calculated
internally, producing artifacts while decoding video.
Signed-off-by: Paul B Mahol <onemda@gmail.com>
This simplifies and cleans up the code.
Furthermore, it is much faster due to absence of the slow log computation.
Reviewed-by: Michael Niedermayer <michael@niedermayer.cc>
Signed-off-by: Ganesh Ajjanagadde <gajjanagadde@gmail.com>
Should fix build on x86_32-msvc2012
The alternative of emulating fmin/fmax* turns out to be non trivial
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
ISO C restricts enumerator values to the range of int. Thus (for instance) 0x80000000
unfortunately does not work, and throws a warning with -Wpedantic on
clang 3.7.
This fixes it by using alternative expressions that result in identical
values but do not have this issue.
Tested with FATE.
Reviewed-by: Ronald S. Bultje <rsbultje@gmail.com>
Reviewed-by: Michael Niedermayer <michael@niedermayer.cc>
Signed-off-by: Ganesh Ajjanagadde <gajjanagadde@gmail.com>
av_gcd is now always defined regardless of input. This documents this
change in the "documented API". Two benefits (closely related):
1. The function is robust, and there is no need to worry about INT64_MIN, etc.
2. Clients of av_gcd, like av_reduce, can now be made fully correct. Currently,
av_reduce can trigger undefined behavior if e.g num is INT64_MIN due to
integer overflow in the FFABS. Furthermore, this undefined behavior is
completely undocumented, and could be a fuzzer's paradise. The FFABS was needed in the past as
av_gcd was undefined for negative inputs. In order to make av_reduce
robust, it is essential to guarantee that av_gcd works for all int64_t.
Reviewed-by: Michael Niedermayer <michael@niedermayer.cc>
Signed-off-by: Ganesh Ajjanagadde <gajjanagadde@gmail.com>
In order to load libraries in Android they need to be unversioned.
The android target section was derived from the BSD ones, and they
that simply drop the SONAME
Android M requires to have a SONAME entry but unversioned.
Previously the message was cut off at 256th byte.
This will allow dumping the complete x264 encode info when needed.
Signed-off-by: Vittorio Giovara <vittorio.giovara@gmail.com>
Drop the need of setting -debug bugs since it's not a bug, and the
message is already under a AV_LOG_DEBUG log level. Instead only print
it when there is an actual string in it.
Use optional sTER chunk defining side-by-side stereo pair
within "Extensions to the PNG 1.2 Specification", version 1.3.0.
Signed-off-by: Vittorio Giovara <vittorio.giovara@gmail.com>
Some systems may be lacking getservbyport; the previous ifdef wasn't
quite enough since it still assumed that struct servent was defined,
as pointed out by Clément Gregoire.
Simply remove the possibility to return non-numeric services in
getnameinfo; no caller of getnameinfo within libavformat
currently try to use getnameinfo for retrieving the port number without
NI_NUMERICSERV, and falling back on getservbyport may be non-threadsafe.
Signed-off-by: Martin Storsjö <martin@martin.st>
This ensures that no undefined behavior is invoked, while retaining
identical return values in all cases and at no loss of performance
(identical asm on clang and gcc).
Essentially, this patch exchanges undefined behavior with implementation
defined behavior, a strict improvement.
Rationale:
1. The ideal solution is to have the return type a uint64_t. This
unfortunately requires an API change.
2. The only pathological behavior happens if both arguments are
INT64_MIN, to the best of my knowledge. In such a case, the
implementation defined behavior is invoked in the sense that UINT64_MAX
is interpreted as INT64_MIN, which any reasonable implementation will
do. In any case, any usage where both arguments are INT64_MIN is a
fuzzer anyway.
3. Alternatives of checking, etc require branching and lose performance
for no concrete gain - no client cares about av_gcd's actual value when
both args are INT64_MIN. Even if it did, on sane platforms (e.g all the
ones FFmpeg cares about), it produces a correct gcd, namely INT64_MIN.
Reviewed-by: Michael Niedermayer <michael@niedermayer.cc>
Signed-off-by: Ganesh Ajjanagadde <gajjanagadde@gmail.com>
This is likely more precise and conveys the intent better.
Reviewed-by: Paul B Mahol <onemda@gmail.com>
Signed-off-by: Ganesh Ajjanagadde <gajjanagadde@gmail.com>
This is more concise and conveys the intent better.
Furthermore, it is likely more precise as well due to lack of floating
point division.
Reviewed-by: Michael Niedermayer <michael@niedermayer.cc>
Signed-off-by: Ganesh Ajjanagadde <gajjanagadde@gmail.com>
This is likely more precise and conveys the intent better.
The expression has also been accordingly simplified.
Reviewed-by: Michael Niedermayer <michael@niedermayer.cc>
Signed-off-by: Ganesh Ajjanagadde <gajjanagadde@gmail.com>
This silences warnings like this one:
libavformat/file.c(62) : warning C4996: 'read': The POSIX name for this
item is deprecated. Instead, use the ISO C++ conformant name: _read.
See online help for details.
Signed-off-by: Martin Storsjö <martin@martin.st>
* commit '8edaf625f3c38c695c33745822182e94e17d6e1b':
libopenh264enc: Count and warn about the number of skipped frames
Merged-by: Hendrik Leppkes <h.leppkes@gmail.com>
* commit '9e14a992409348630ea96521411127418a92e8a3':
libopenh264enc: Add an option for controlling the frame skipping
Merged-by: Hendrik Leppkes <h.leppkes@gmail.com>
* commit 'b8deb7c34f755d5e3eee0b5930c3a6ad2dda96bc':
opus: Do not call vector_fmul_scalar on zero samples
Merged-by: Hendrik Leppkes <h.leppkes@gmail.com>
* commit 'cd0e08813a0484002b5defbf557c859f123953ae':
avconv: support infinite loop for the loop option
Merged-by: Hendrik Leppkes <h.leppkes@gmail.com>
* commit 'a9a60106370f862e191dea58e748626da6a8fe97':
avpacket: Provide an alloc and a free function for the struct
Merged-by: Hendrik Leppkes <h.leppkes@gmail.com>
For the 10-show-existing-frame, the source file indeed has a timestamp
of 3 (or 100/33) for the second visible frame, so the fix appears to
work correctly. For the other, only the timebase is fixed, but again
appears to be correct now.
This one should not trigger any warnings, but will be useful for future
robustness.
Strictly speaking, one could check the size after the call by examining
the structure instead of the return value. Such a use case is highly
unusual, and this commit may be easily reverted if there is a legitimate
need of such use.
Reviewed-by: Michael Niedermayer <michael@niedermayer.cc>
Signed-off-by: Ganesh Ajjanagadde <gajjanagadde@gmail.com>
This code is in a performance critical section. AV_QSORT is
substantially faster due to the inlining of the comparison callback.
Thus, the increase in performance is worth the increase in binary size.
Reviewed-by: Michael Niedermayer <michael@niedermayer.cc>
Signed-off-by: Ganesh Ajjanagadde <gajjanagadde@gmail.com>
This ensures that the macro remains correct in the sense of allowing
expressions for value and bits, by placing the value and bits expressions within
parentheses.
Reviewed-by: James Almer <jamrial@gmail.com>
Signed-off-by: Ganesh Ajjanagadde <gajjanagadde@gmail.com>
This allows enabling the frame skipping, which is required for the
encoder to properly hit the target bitrate.
Signed-off-by: Martin Storsjö <martin@martin.st>
When not all the opus stream have the same amount of decoded samples
process the least amount and store what is left from the other streams.
Bug-Id: 909
CC: libav-stable@libav.org
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
Use optional sTER chunk defining side-by-side stereo pair
within "Extensions to the PNG 1.2 Specification", version 1.3.0.
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
add yuv444p, yuv422p, and yuv420p output format (lower cpu usage
on ffplay playback because it does not do format conversion)
custom size with size/s option (fullhd option is deprecated)
custom layout with bar_h, axis_h, and sono_h option
support rational frame rate (within fps/r/rate option)
relaxed frame rate restriction (support fractional sample step)
support all input sample rates
separate sonogram and bargraph volume (with volume/sono_v and
volume2/bar_v)
timeclamp option alias (timeclamp/tc)
fcount option
gamma option alias (gamma/sono_g and gamma2/bar_g)
support custom frequency range (basefreq and endfreq)
support drawing axis using external image file (axisfile option)
alias for disabling drawing to axis (text/axis)
possibility to optimize it using arch specific asm code
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
For protocols other than local files ff_rename() is not implemented
For split planes support the implementation is simply wrong
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
* commit 'fe66671bd5f446f8d0a9c70968ba8fe891efe028':
cmdutils: Check for and report the correct codec capability
Merged-by: Hendrik Leppkes <h.leppkes@gmail.com>
* commit '447b5b278c689b21bbb7b5747c8773145cbd9448':
mpegvideo_enc: Fix encoding videos with less frames than the delay of the encoder
Merged-by: Hendrik Leppkes <h.leppkes@gmail.com>
* commit '18f9308e6a96bbeb034ee5213a6d41e0b6c2ae74':
mpjpeg: Cope with multipart lacking the initial CRLF
Merged-by: Hendrik Leppkes <h.leppkes@gmail.com>
* commit '22f4d9c303ede1a240538fd105c97047db40dc86':
img2enc: Make sure the images are atomically written
Merged-by: Hendrik Leppkes <h.leppkes@gmail.com>
* commit '5ea5a24eb70646a9061b85af407fcbb5dd4f89fd':
movenc: Honor flush requests with delay_moov, when some tracks lack samples
Merged-by: Hendrik Leppkes <h.leppkes@gmail.com>
* commit 'e02dcdf6bb6835ef4b49986b85a67efcb3495a7f':
rtsp: Allow $ as interleaved packet indicator before a complete response header
Merged-by: Hendrik Leppkes <h.leppkes@gmail.com>
* commit 'dca23ffbc7568c9af5c5fbaa86e6a0761ecae50c':
lavc: Deprecate AVPicture structure and related functions
Deprecation flag on AVPicture struct replaced by a comment, as it causes
excess deprecation warnings for every include of avcodec.h
Merged-by: Hendrik Leppkes <h.leppkes@gmail.com>
HWAccels with frame threads are fundamentally flawed in avcodecs current
design, and there are several known problems ranging from image corruption
to driver crashes.
These problems come down to two design problems in the interaction of
threads and HWAccel decoding:
(1)
While avcodec prevents parallel decoding and as such simultaneous access
to the hardware accelerator from the decoding threads, it cannot account
for the user code and its access to the hardware surfaces and the hardware
itself.
This can result in image corruption or even driver crashes if the
user code locks image surfaces while they are being used by the decoder
threads as reference frames.
The current HWAccel API does not offer any way to ensure exclusive access
to the hardware or the surfaces if frame threading is used.
(2)
Initialization of the HWAccel with frame threads is non-trivial, and many
decoders had and still have issues that cause excess calls to the
get_format callback.
This will potentially cause duplicate HWAccel initialization, which in
extreme cases can even lead to driver crashes if the HWAccel is
re-initialized while the user code is actively accessing the hardware
surfaces associated with it, or lead to image corruption due to lost
reference frames.
While both of these issues are solvable, fixing (1) would at least require
a huge API redesign which would move a lot of complexity into the user
code.
The only reason the combination of frame threads and HWAccel was
considered useful is to allow a seamless fallback to multi-threaded
software decoding if the HWAccel is not available, however the issues
outlined above far outweigh this.
The proper solution for a fallback is to re-open the AVCodecContext with
threading enabled if the HWAccel failed, which is a practice commonly used
by various user applications using avcodec today already.
Reviewed-by: Gwenole Beauchesne <gb.devel@gmail.com>
Reviewed-by: wm4 <nfxjfg@googlemail.com>
Signed-off-by: Hendrik Leppkes <h.leppkes@gmail.com>
The Apple dev specification:
https://developer.apple.com/library/mac/documentation/QuickTime/QTFF/Metadata/Metadata.html
Basically the structure is like:
|--meta
|----hdlr
|----keys
|----ilst
1) The handler type in the metadata handler atom is ‘mdta’.
2) The key and value are stored separately for each key-value pair.
The 'keys' atom stores the key table, while 'ilst' atom stores the
values corresponding to the indices in the key table.
Signed-off-by: Derek Buitenhuis <derek.buitenhuis@gmail.com>
This fixes a fate failure after bumping the minor version
Its unknown why this is not needed for the other aac tests,
more investigation needed but for now i dont want to leave
it broken while its investigated
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
When the encoder is fed with less frames than its delay, the picture list
looks like { NULL, NULL, ..., frame, frame, frame }. When flushing the
encoder (input frame == NULL), we need to ensure the picture list is
shifted enough so that we do not return an empty packet, which would
mean the encoder has finished, while it has not encoded any frame.
Signed-off-by: Vittorio Giovara <vittorio.giovara@gmail.com>
Commit 7c8fcbbde3 introduced some warnings
that get triggered on the test build. This should fix them.
Signed-off-by: Ganesh Ajjanagadde <gajjanagadde@gmail.com>
This adds const-correctness when needed for the comparators.
Reviewed-by: Ronald S. Bultje <rsbultje@gmail.com>
Signed-off-by: Ganesh Ajjanagadde <gajjanagadde@gmail.com>
libc's qsort comparator has a const qualifier on both arguments. This
adds a missing const qualifier to exactly match the comparator API.
Existing usages of av_tree_find, av_tree_insert are appropriately
modified: type signature changes of the comparators, and removal of
unnecessary void * casts of function pointers.
Reviewed-by: Henrik Gramner <henrik@gramner.com>
Reviewed-by: wm4 <nfxjfg@googlemail.com>
Signed-off-by: Ganesh Ajjanagadde <gajjanagadde@gmail.com>
This documents the additional constness, and provides a useful libc
reference for the API specification of the comparator.
Reviewed-by: Henrik Gramner <henrik@gramner.com>
Reviewed-by: wm4 <nfxjfg@googlemail.com>
Signed-off-by: Ganesh Ajjanagadde <gajjanagadde@gmail.com>
For generality, qsort uses a comparator whose elements are void *. This
makes the comparator have such a form, and thus makes the void * cast of
the comparator pointer useless. Furthermore, this makes the code more
consistent with other usages of qsort across the codebase.
Reviewed-by: Henrik Gramner <henrik@gramner.com>
Reviewed-by: wm4 <nfxjfg@googlemail.com>
Signed-off-by: Ganesh Ajjanagadde <gajjanagadde@gmail.com>
This fixes extra semicolons that clang 3.7 on GNU/Linux warns about.
These were trigggered when built under -Wpedantic, which essentially
checks for strict ISO compliance in numerous ways.
Reviewed-by: Michael Niedermayer <michael@niedermayer.cc>
Signed-off-by: Ganesh Ajjanagadde <gajjanagadde@gmail.com>
These casts are unnecessary, and may safely be removed.
Found by enabling -Wpedantic on clang 3.7.
Tested with FATE.
Reviewed-by: Michael Niedermayer <michael@niedermayer.cc>
Signed-off-by: Ganesh Ajjanagadde <gajjanagadde@gmail.com>
ISO C requires at least one argument in the place of the ellipsis in a
variadic macro. In particular, under -pedantic, this triggers the
warning -Wgnu-zero-variadic-macro-arguments on clang 3.7.
Reviewed-by: Nicolas George <george@nsup.org>
Signed-off-by: Ganesh Ajjanagadde <gajjanagadde@gmail.com>
Current code segfaults since the deprecation of AVSubtitleRect.pict because it
freed/realloced AVSubtitleRect.pict.data by itself.
The new code stores the generated YUVA AVSubtitle rectangles in their own
struct and keeps the original AVSubtitle structure untouched, because
overwriting it is considered invalid API usage.
Signed-off-by: Marton Balint <cus@passwd.hu>
GCC (and Clang) have this useful warning that is not enabled by -Wall or
-Wextra. This will ensure that issues like those fixed in
4da52e3630
will trigger warnings.
Reviewed-by: Hendrik Leppkes <h.leppkes@gmail.com>
Signed-off-by: Ganesh Ajjanagadde <gajjanagadde@gmail.com>
Some server in the wild do not put the boundary at a newline
as rfc1347 7.2.1 states.
Cope with that by reading a line and if it is not empty reading
a second one.
Reported-By: bitingsock
mp3 packets all have the same duration and number of samples
if their duration indicated in the container varies then thats an
indication that they are not 1 mp3 packet each.
If this autodetection fails for some case then please contact us
and provide a testcase.
Fixes Ticket4938
This also makes sure that a fragmented file without the empty_moov
flag (i.e. with a non-empty initial moov fragment) actually gets
written, if some of the tracks turn out to not have any samples.
Signed-off-by: Martin Storsjö <martin@martin.st>
Some RTSP servers ("HiIpcam/V100R003 VodServer/1.0.0") respond to
our keepalive GET_PARAMETER request by a truncated RTSP header
(lacking the final empty line to indicate a complete response
header). Prior to 764ec70149, this worked just fine since we
reacted to the $ as interleaved packet indicator anywhere.
Since $ is a valid character within the response header lines,
764ec70149 changed it to be ignored there. But to keep
compatibility with such broken servers, we need to at least
allow reacting to it at the start of lines.
Signed-off-by: Martin Storsjö <martin@martin.st>
It is well known that fabs and fabsf are at least as fast and sometimes
faster than the FFABS macro, at least on the gcc+glibc combination.
For instance, see the reference:
http://patchwork.sourceware.org/patch/6735/.
This was a patch to glibc in order to remove their usages of a macro.
The reason essentially boils down to fabs using the __builtin_fabs of
the compiler, while FFABS needs to infer to not use a branch and to
simply change the sign bit. Usually the inference works, but sometimes
it does not. This may be easily checked by looking at the asm.
This also has the added benefit of reducing macro usage, which has
problems with side-effects.
Note that avcodec is not handled here, as it is huge and
most things there are integer arithmetic anyway.
Tested with FATE.
Reviewed-by: Clément Bœsch <u@pkh.me>
Signed-off-by: Ganesh Ajjanagadde <gajjanagadde@gmail.com>
* commit '3ee2c60cc296eee3f63d7b5fee9b4332eeeac9fa':
utils: Use data buffers directly instead of an AVPicture
Merged-by: Hendrik Leppkes <h.leppkes@gmail.com>
* commit 'ff7956fcbf8e59b21654b95038de3ed88a850a9e':
avplay: Replace avpicture functions with imgutils
avplay and ffplay have diverged quite a bit, and ffplay should be updated
independently.
Merged-by: Hendrik Leppkes <h.leppkes@gmail.com>
* commit 'f890677d05bc4e8b494a73373ab4cc19791bf884':
Replace any remaining avpicture function with imgutils
Merged-by: Hendrik Leppkes <h.leppkes@gmail.com>
* commit 'fb472e1a11a4e0caed2c3c91da01ea8e35d9e3f8':
avconv: add support for Intel QSV-accelerated transcoding
Merged-by: Hendrik Leppkes <h.leppkes@gmail.com>
* commit 'dc923bc23b3efd949d0bf67ff1abdb95059e5843':
qsvenc: add an API for allocating opaque surfaces
Merged-by: Hendrik Leppkes <h.leppkes@gmail.com>
* commit 'f6f32fc93d39caf329869c1bff8ad024ccab1d42':
qsvenc: set the timestamp for PIX_FMT_QSV frames as well
Merged-by: Hendrik Leppkes <h.leppkes@gmail.com>
* commit '772c87c5a658f36d7c0612f5da583fc2bfa54f79':
qsvenc: support passing arbitrary external buffers to the encoder
Merged-by: Hendrik Leppkes <h.leppkes@gmail.com>
This structure served as a bridge between data pointers and frames,
but it suffers from several limitations:
- it is not refcounted and data must be copied to every time
- it cannot be expanded without ABI break due to being used on the stack
- its functions are just wrappers to imgutils which add a layer of
unneeded indirection, and maintenance burden
- it allows hacks like embedding uncompressed data in packets
- its use is often confusing to our users
AVFrame provides a much better API, and, if a full blown frame is not
needed, it is just as simple and more straightfoward to use data and
linesize arrays directly.
Signed-off-by: Vittorio Giovara <vittorio.giovara@gmail.com>
Register mmaldec as mpeg2 decoder. Supporting mpeg2 in mmaldec is just a
matter of setting the correct MMAL_ENCODING on the input port. To ease the
addition of further supported mmal codecs a macro is introduced to generate
the decoder and decoder class structs.
Signed-off-by: Julian Scheel <julian@jusst.de>
Signed-off-by: wm4 <nfxjfg@googlemail.com>
This function is only used within other inline asm functions, hence the
HAVE_MMX_INLINE guard. Per recent discussions, we should not worry about
the performance of inline asm-only builds.
There is no avpriv_atomic_get, instead avpriv_atomic_int_get is to be used for
integers. This fixes building mmaldec.
Signed-off-by: Julian Scheel <julian@jusst.de>
Reviewed-by: wm4 <nfxjfg@googlemail.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Use the new fields directly instead of the ones from AVPicture.
This removes a layer of indirection which serves no pratical purpose
whatsoever, and will help in removing AVPicture structure completely
later.
Every subtitle encoder/decoder seamlessly points to the new arrays,
so it is possible to deprecate AVSubtitleRect.pict.
Signed-off-by: Vittorio Giovara <vittorio.giovara@gmail.com>
Callers always use a frame and cast it to AVPicture, change
ff_msrle_decode() to accept an AVFrame directly instead.
Signed-off-by: Vittorio Giovara <vittorio.giovara@gmail.com>
This commit introduces a parser for the current bitstream produced by
Daala. It currently bears a large similarity with Theora, another
codec produced by Xiph. While likely to change in the future, its basic
format of packet parsing should remain fairly identical with its current
structure.
Once the bitstream freezes, there are a few probable simplifications
that could be made. Also, the current version (major, minor and micro)
is stuck at zero so it's unusable as a way to warn about possible
incompatibilities. This will change once the bitstream freezes,
however until then this file is strictly targeting the current git
master of the reference encoder, libdaala.
This file was developed independently at the same time by both myself
and Vittorio Giovara, who used libav as a starting point. For fairness,
and to prevent confusion and allegations, his name has been added to the
copyright in the license header as well, and vice versa.
This commit shall introduce the first step of adding support for the
Daala next generation video codec to FFmpeg. Although still in
development, the codec is showing good progress and exchanging work
through IETF drafts. The companies behind Daala are also participating
in the Alliance for Open Media, so it's likely that whatever the result
any of these collaborations produce it's probable that elements from
Daala could be used in them, or perhaps this codec itself could be the
result.
VP8E_UPD_ENTROPY, VP8E_UPD_REFERENCE, VP8E_USE_REFERENCE were removed
from libvpx and the remaining values were never used here
Reviewed-by: Michael Niedermayer <michael@niedermayer.cc>
Signed-off-by: James Zern <jzern@google.com>
Also replace the last two usages of avpriv_float_dsp_init with
avpriv_float_dsp_alloc.
Reviewed-by: James Almer <jamrial@gmail.com>
Signed-off-by: Andreas Cadhalpun <Andreas.Cadhalpun@googlemail.com>
The parser only reads the dca core sample rate, which is limited to a
maximum of 48000 Hz, while X96 and HD extensions can increase the sample
rate up to 192000 Hz.
This change prevents the parser and decoder fighting over the sample rate,
potentially confusing user applications. This also fixes sample rate
display of >48000Hz files with ffmpeg/ffprobe when using libdcadec.
Fixes ticket #4397
Commit 2b3e9bbfb5 caused problems for a
certain API user:
https://code.google.com/p/chromium/issues/detail?id=537725https://code.google.com/p/chromium/issues/detail?id=542032
The problem seems rather arbitrary, because if there's junk, anything
can happen. In this case, the imperfect junk skipping just caused it to
read different junk, from what I can see.
We can improve the accuracy of junk detection by a lot by checking if 2
consecutive frames use the same configuration. While in theory it might
be completely fine for the 1st frame to have a different format than the
2nd frame, it's exceedingly unlikely, and I can't think of a legitimate
use-case.
This is approximately the same mpg123 does for junk skipping. The
set of compared header bits is the same as the libavcodec mp3 parser
uses for similar purposes.
This is how the other perl scripts in git call perl
Reviewed-by: Ganesh Ajjanagadde <gajjanag@mit.edu>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
treat this the same as an over-sized superframe packet to break out of
the parser loop and allow the decoder to fail.
Reviewed-by: Ronald S. Bultje <rsbultje@gmail.com>
Signed-off-by: James Zern <jzern@google.com>
These functions return an error typically when the key size is an
incorrect number. AVERROR(EINVAL) is more specific than -1.
Reviewed-by: Ronald S. Bultje <rsbultje@gmail.com>
Reviewed-by: Michael Niedermayer <michael@niedermayer.cc>
Signed-off-by: Ganesh Ajjanagadde <gajjanagadde@gmail.com>
Commit 3a0a2f33a6 claims large performance
advantages for AV_QSORT over libc's qsort. The reason is that I suspect
that libc's qsort (at least on non LTO builds, like the typical FFmpeg config)
can't inline the comparison callback:
https://stackoverflow.com/questions/5290695/is-there-any-way-a-c-c-compiler-can-inline-a-c-callback-function.
AV_QSORT has two things going for it:
1. The guaranteed inlining of qsort itself. This yields a negligible
boost that may be ignored.
2. The more serious possibility of potentially allowing the comparison
function to be inlined - this is likely responsible for the large boosts
reported.
There is a comment explaining that this is a place that could use some
performance improvement. Thus AV_QSORT is used to achieve that.
Benchmarks deemed unnecessary due to existing claims about AV_QSORT.
Tested with FATE.
Reviewed-by: Michael Niedermayer <michael@niedermayer.cc>
Signed-off-by: Ganesh Ajjanagadde <gajjanagadde@gmail.com>
When the encoder is fed with less frames than its delay, the picture list looks like { NULL, NULL, ..., frame, frame, frame }. When flushing the encoder (input frame == NULL), we need to ensure the picture list is shifted enough so that we do not return an empty packet, which would mean the encoder has finished, while it has not encoded any frame.
Before the patch, the command:
'./ffmpeg_g -loglevel debug -f lavfi -i "testsrc=d=0.01" -bf 2 -vcodec mpeg2video out.mxf' prints:
Output stream #0:0 (video): 1 frames encoded; 0 packets muxed (0 bytes);
After:
Output stream #0:0 (video): 1 frames encoded; 1 packets muxed (8058 bytes);
Relates to ticket #4817.
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
There were some errors in the calculation as well as an entire
unnecessary loop to find the gain coefficient. Merge the
two loops.
Thanks to @ubitux for the suggestions and testing.
av_warn_unused_result is added to functions whose return status should
be checked. Currently does not trigger any warnings, but should be
useful for future robustness.
Reviewed-by: Michael Niedermayer <michael@niedermayer.cc>
Signed-off-by: Ganesh Ajjanagadde <gajjanagadde@gmail.com>
The fate test command line is supposed to serve as an example. It's
nicer to explicitly state the profile rather than setting options
to force it for you.
Changes:
- strongly prefer dual filters to a single filter
- less strict about using 2 filters w.r.t. energy
- scrap the usage of threshold and spread, useless
- use odd-shaped windows to set the filter direction
- use 4 bits instead of 3 bits for short windows
- simplify and reduce the main loop to a single level
- add stricter regulations for short windows
All of this now makes the TNS implementation operate
as good as it can and it definitely shows. The frequency
thresholds are now even better defined by looking at
the spectrals and the overall sound has been improved at
the price of just a few bits that are well worth it.
Too much effort and work has been spent on such a simple function.
It simply refuses to work as the specifications say, the
transformation is NOT lossless and creates some crackling and
distortions.
Therefore disable it by default and add a couple of warnings to
scare people away from touching it or wasting their time the
way I did.
The decoder does this so I guess we better do that as well.
There's barely any difference between the autoregressive and
the moving average filters looking at spectrals though.
Silences warnings regarding `clCreateCommandQueue` being deprecated.
Only a very limited number of products support 2.0. Since the
replacement API (`clCreateCommandQueueWithProperties`) is only available
in 2.0, we should not update it just yet.
GCC 3.4 miscompiles it on sunos. Date of release? The second of
August two thousand and five, anno Domini. That's ten years two
months and fourteen days ago. Three thousand seven hundred and
twenty seven days ago. One sixth of the average life expectancy
of a person living in a country with a human development index
of zero point eight hundred and eight, equality adjusted.
GCC 4.3 also miscompiles it, though not as bad.
The LTP encoding and the test is a bit slow currently, taking twice
the amount of time the other tests do, so in the future the
total time to encode might be cut down on that test.
It didn't work out because of the exceptions that needed to be made
for the "-1" cases and was overall more confusing that just manually
checking and setting options for each profile.
Commit bf0d2d6030 introduced
av_warn_unused_result to avfilter/formats, whose associated warnings
were mostly fixed in 6aaac24d72. This
fixes the issues in avfilter/avfiltergraph.
Tested with FATE.
Reviewed-by: Ronald S. Bultje <rsbultje@gmail.com>
Signed-off-by: Ganesh Ajjanagadde <gajjanagadde@gmail.com>
Long Term Prediction allows for prediction of spectral coefficients
via the previously decoded time-dependent samples. This feature
works well with harmonic content 2 or more frames long, like speech,
human or non-human, piano music or any constant tones at very low
bitrates.
It should be noted that the current coder is highly efficient and
the rate control system is unable to encode files at extremely
low bitrates (less than 14kbps seems to be impossible) so this
extension isn't capable of optimum operation. Dramatic difference
is observable with some types of audio and speech but for the most
part the audiable differences are subtle. The spectrum looks better
however so the encoder is able to harvest the additional bits that
this feature provies, should the user choose to enable it. So
it's best to enable this feature only if encoding at the absolutely
lowest bitrate that the encoder is capable of.
Apparently it was set to be enabled by default but after the
profile commits it was reverted to be off by default because
I didn't notice.
Works well so (re)enable it.
This adds av_warn_unused_result to functions whose return codes need to
be checked.
Reviewed-by: Michael Niedermayer <michael@niedermayer.cc>
Signed-off-by: Ganesh Ajjanagadde <gajjanagadde@gmail.com>
It's been argued that the benefits of the current implementation far outweight
those of making the structs opaque.
This deprecation is not present in any release, so it can be safely removed.
Reviewed-by: Ronald S. Bultje <rsbultje@gmail.com>
Signed-off-by: James Almer <jamrial@gmail.com>
The open syscall can obviously fail, and its return code needs to be
checked.
Reviewed-by: Michael Niedermayer <michael@niedermayer.cc>
Signed-off-by: Ganesh Ajjanagadde <gajjanagadde@gmail.com>
* commit '68e00ad66d13c57d9eb3a3862b44ab3fb030e19f':
w32pthreads: fix mingw build on x86 with -msse2 or higher
Merged-by: Hendrik Leppkes <h.leppkes@gmail.com>
* commit '2d59159508c5c1830cc5da907a9454e229077320':
lavc: AV-prefix a few left out capabilities
Not applied, since this change breaks compilation and is not correct.
Merged-by: Hendrik Leppkes <h.leppkes@gmail.com>
* commit 'e240a28b20680b326a39b0860fda37d7e459bfc0':
cmdutils: Add auto to threading capabilities report
Merged-by: Hendrik Leppkes <h.leppkes@gmail.com>
When SSE2 or higher compiler optimizations are used, mingw uses
the _mm_mfence intrinsic for MemoryBarrier, however it doesn't include
the appropriate headers automatically.
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
Filters which support such changes should be excluded from these checks
Fixes Ticket4884
Reviewed-by: Paul B Mahol <onemda@gmail.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
When SSE2 or higher compiler optimizations are used, mingw uses
the _mm_mfence intrinsic for MemoryBarrier, however it doesn't include
the appropriate headers automatically.
This does not trigger any warnings, but adds robustness.
Reviewed-by: Nicolas George <george@nsup.org>
Signed-off-by: Ganesh Ajjanagadde <gajjanagadde@gmail.com>
The AVCodecContext.get_format callback is not only used for pixel format
negotiation with the API user, but also for hwaccel init. For the
latter, it's required that some codec parameters, in particular the
codec profile, are set when the callback is invoked.
This patch removes a get_format invocation where this is not guaranteed.
The codec parameters, including the profile, are really set further
below. (The same code path that sets the profile also calls get_format
properly too.)
This just happened to work by coincidence in most cases. For example, if
the API user just copied or reused the AVStream's AVCodecContext when
decoding, the profile would be set properly. But in some cases it
fails., such as with the sample WolfensteinTwitch.mp4 on the samples
server.
Remove the redundant get_format call. Apparently it serves no purpose
anymore, although it is possible that this was different at the time it
was added in commit ffd77f94a2.
This fixes hwaccel usage for API users which do not set the profile
when setting up the AVCodecContext (which is allowed).
Without EXT-X-MAP support we miss the first bytes of some streams.
These streams worked by luck before byte-ranged segment support was added in
da7759b357
Fixes ticket #4797.
Commit ad701326b4 ("avformat/hls: open playlists immediately when
AVDISCARD_ALL is dropped") inadvertently caused first_packet to never be
cleared, causing select_cur_seq_no() to not use the specific code for
live streams.
In practice this means that when the user selects a different audio
track during live stream (i.e. non-VOD) playback, there may be some
additional delay as the code might select an incorrect segment at first,
and we have to wait for video to catch audio (if too late segment was
selected) or to download more following audio segments (if too early
segment was selected).
Fix that by restoring the zeroing of first_packet.
This allows more efficient access to the array as the level and flags
are contiguous. Around 4% faster coefficient decoding.
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
* commit 'c1348506697377b46f844339c178332e3314149a':
httpauth: Add space after commas in HTTP/RTSP auth header
Merged-by: Hendrik Leppkes <h.leppkes@gmail.com>
* commit 'e55376a1fd5abebbb0a082aa20739d58c2260a37':
rtmpproto: Write correct flv packet sizes at the end of packets
Merged-by: Hendrik Leppkes <h.leppkes@gmail.com>
The "loop" option is used in several demuxers (like img2dec) and muxers, using the same name in ffmpeg_opt
breaks them. Feel free to revert this and replace by any other solution or rename both as preferred
This is just as a quick fix to avoid the regression with existing command lines and to have both named
the same (which does not work)
Example:
./ffmpeg -loop 1 -i fate-suite/png1/lena-rgb24.png -t 1 test.avi
will produce 25 frames with the img2dec loop but only 1 frame at 25fps with the ffmpeg loop option
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
It has already been demonstrated that the de Bruijn method has benefits
over the current implementation: commit 971d12b7f9.
That commit implemented it for long long, this extends it to the int version.
Tested with FATE.
Signed-off-by: Ganesh Ajjanagadde <gajjanagadde@gmail.com>
Signed-off-by: Ronald S. Bultje <rsbultje@gmail.com>
This uses the av_warn_unused_result attribute liberally to catch some forms of improper
usage of functions defined in avfilter/formats.h.
Reviewed-by: Nicolas George <george@nsup.org>
Signed-off-by: Ganesh Ajjanagadde <gajjanagadde@gmail.com>
Many of the functions from avfilter/formats can return errors, usually AVERROR(ENOMEM).
This propagates the return values.
All of these were found by using av_warn_unused_result, demonstrating its utility.
Tested with FATE. I am least sure of the changes to avfilter/filtergraph,
since I don't know what/how reduce_format is intended to behave and how it should
react to errors.
Fixes: CID 1325680, 1325679, 1325678.
Reviewed-by: Michael Niedermayer <michael@niedermayer.cc>
Previous version Reviewed-by: Nicolas George <george@nsup.org>
Previous version Reviewed-by: Clément Bœsch <u@pkh.me>
Signed-off-by: Ganesh Ajjanagadde <gajjanagadde@gmail.com>
* commit '17e41cf3614973258c24aa2452215ef7e3bfa5ed':
avcodec: Do not lock during init if there is no init function
Merged-by: Hendrik Leppkes <h.leppkes@gmail.com>
* commit '34ed5c2e4d9b7fe5c9b3aae2da5599fabb95c02e':
avformat: Do not use AVFMT_RAWPICTURE
Removal from ffmpeg.c not merged because some parts of avdevice
still use it
Merged-by: Hendrik Leppkes <h.leppkes@gmail.com>
This fixes access to Grandstream cameras, which return 401 otherwise.
VLC sends Authorization: header with spaces between parameters, and it
is known to work with Grandstream devices and broad range of other HTTP
and RTSP servers, so author considers switching to such behaviour safe.
See RFC 2617 (HTTP Auth).
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
In one case it was written as zero, one case left it uninitialized,
missed the 11 bytes for the flv header.
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
Work on the AVFrame references directly.
Instead of setting up a flipped/swapped "view" on the pictures,
flip/swap them when returning decoded frames to the API user.
Rather than copying data buffers around, allocate a proper frame, and
use the standard AVFrame functions. This effectively makes the decoder
capable of direct rendering.
Signed-off-by: Vittorio Giovara <vittorio.giovara@gmail.com>
Partially fixes Ticket 4727.
-duration is not a safe expression, since duration can be INT_MIN.
One might ask how it can become INT_MIN.
Although it is true that line 2574 is no longer reached with INT_MIN due
to commit 053e80f6ea (which fixed another
integer overflow issue), mov_update_dts_shift is called on line 3549 as
well, right after a read of untrusted data.
One can do the fix locally there, but that function is already a huge
mess. Changing mov_update_dts_shift is likely better.
This changes duration to INT_MIN + 1 in such cases. This should not make any
practical difference since such streams are anyway fuzzer files.
Tested with FATE.
Reviewed-by: Michael Niedermayer <michael@niedermayer.cc>
Signed-off-by: Ganesh Ajjanagadde <gajjanagadde@gmail.com>
FFABS(INT_MIN) is not safe. Alternative of using FFNABS is not as
readable.
Reviewed-by: Michael Niedermayer <michael@niedermayer.cc>
Signed-off-by: Ganesh Ajjanagadde <gajjanagadde@gmail.com>
This avoid going through constants.c while still sharing them
with proresdsp.asm
Reviewed-by: "Ronald S. Bultje" <rsbultje@gmail.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
changing the context state and restoring it is not safe if another
thread writes data into the fifo
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
This patch fixes build of AAC encoder optimized for mips that was broken due
to some changes in generic code that were not propagated to the optimized code.
Also, some functions in the optimized code are basically duplicate of functions
from generic code. Since they do not bring enough improvement to the optimized
code to justify their existence, they are removed (which improves
maintainability of the optimized code).
Optimizations disabled in 97437bd are enabled again.
Signed-off-by: Nedeljko Babic <nedeljko.babic@imgtec.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
These aren't quite as helpful as the ones in 8bpp, since over there,
we can use pmulhrsw, but here the coefficients have too many bits to
be able to take advantage of pmulhrsw. However, we can still skip
cols for which all coefs are 0, and instead just zero the input data
for the row itx. This helps a few % on overall decoding speed.
The trouble with this function is that intermediates overflow 31+sign
bits, so I've added some helpers (that will also be used in 10/12bpp
8x8, 16x16 and 32x32) to make that easier, basically emulating a half-
assed pmaddqd using 2xpmaddwd. It's currently sse2-only, if anyone sees
potential in adding ssse3, I'd love to hear it.
On 12 frames of a 444p 12 bits DNxHR sequence, _put function:
C: 78902 decicycles in idct, 262071 runs, 73 skips
avx: 32478 decicycles in idct, 262045 runs, 99 skips
Difference between the 2:
stddev: 0.39 PSNR:104.47 MAXDIFF: 2
This is unavoidable and due to the scale factors used in the x86
version, which cannot match the C ones.
In addition, the trick of adding an initial bias to the input of a
pass can overflow, as the input coefficients are already 15bits,
which is the maximum this function can handle.
Overall, however, the omse on 12 bits samples goes from 0.16916 to
0.16883. Reducing rowshift by 1 improves to 0.0908, but causes
overflows.
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Modeled from the prores version. Clips to [0;1023] and is bitexact.
Bitexactness requires to add offsets in different places compared to
prores or C, and makes the function approximately 2% slower.
For 16 frames of a DNxHD 4:2:2 10bits test sequence:
C: 60861 decicycles in idct, 1048205 runs, 371 skips
sse2: 27567 decicycles in idct, 1048216 runs, 360 skips
avx: 26272 decicycles in idct, 1048171 runs, 405 skips
The add version is not implemented, so the corresponding dsp
function is set to NULL to make it clear in a code executing it.
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
When the input of a pass has 15 or 16 bits of precision (in particular
the column pass), the addition of a bias to W4 may lead to overflows
in the input to pmaddwd.
This requires postponing the adding of the bias to after the first
butterfly. To do so, the fact that m15, unused although zeroed, is
exploited. In case the pass is safe, an address can be directly used,
and the number of xmm regs can be decreased. Otherwise, the 32bits bias
is loaded into it.
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
It was useful to (accidentally?) spot an overflow in the column pass
of the x86 simple_idct10 implementation.
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
omse goes from 0.03060703 (which fails for dct-test) to 0.01663750.
This also actually improve the error of decoding the sample generated
by fate-vsynth3-dnxhd1080i-10bit using simple_idct10 to FAANI, which
goes (when resampled to yuv422p) from:
stddev: 0.06 PSNR: 72.28 MAXDIFF: 1
to identical.
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
This should be reused for a generic simple_idct10 function.
Requires a bit of trickery to declare common constants in C.
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Includes escapes that should now be supported and a few features not yet
fully supported, like comments, regions, classes, ruby, and lang.
All were tested with https://quuz.org/webvtt/ for validation, except
regions because the validator doesn't support them yet, and I couldn't
find any other way to validate WebVTT.
Signed-off-by: Ricardo Constantino <wiiaboo@gmail.com>
Bare ampersand characters are still accepted, even though out-of-spec.
Also fixes adjacent tags not being parsed.
Fixes trac #4915
Signed-off-by: Ricardo Constantino <wiiaboo@gmail.com>
This commit adds the ability for a profile to set the default
options, as well as for the user to override such options
by simply stating them in the command line while still keeping
the same profile, as long as those options are still permitted by
the profile.
Example: setting the profile to aac_low (the default) will turn
PNS and IS on. They can be disabled by -aac_pns 0 and -aac_is 0,
respectively. Turning on -aac_pred 1 will cause the profile to be
elevated to aac_main, as long as no options forbidding aac_main
have been entered (like AAC-LTP, which will be pushed soon).
A useful feature is that by setting the profile to mpeg2_aac_low,
all MPEG4 features will be disabled and if the user tries to enable
them then the program will exit with an error. This profile is
signalled with the same bitstream as aac_low (MPEG4) but some devices
and decoders will fail if any MPEG4 features have been enabled.
It makes possible to put multiple stream specifier into the select
option separated by comma.
eg. select=\'a:0,v\'
Signed-off-by: Bela Bodecs <bodecsb@vivanet.hu>
Signed-off-by: Nicolas George <george@nsup.org>
This commit implements support for 7.1 channel audio. There's no
more predefined bitstream channel mappings so going beyond 8 channels
(and 7 channels exactly) will require programmable channel elements,
which is already underway.
The bulk of calls to quantize_band_cost are replaced
by a call to a version that memoizes, greatly improving
performance, since during coefficient search there is
a great deal of repeat work.
Memoization cannot always be applied, so do this in a
different function, and leave the original as-is.
Intermediate results can indeed violate SF delta. Instead of asserting
there, just make the code safe, and assert on the final result.
Also re-clamp SFs more often in short windows (which tend to violate
the restriction when encoding the switch from one window to the other)
It was merged with the iff_ilbm decoder in commit
929a24efff.
Define AV_CODEC_ID_IFF_BYTERUN1 as AV_CODEC_ID_IFF_ILBM for API
compatibility.
Reviewed-by: Ronald S. Bultje <rsbultje@gmail.com>
Signed-off-by: Andreas Cadhalpun <Andreas.Cadhalpun@googlemail.com>
This finalizes merging of the work in the patches in ticket #2686.
Improvements to twoloop and RC logic are extensive.
The non-exhaustive list of twoloop improvments includes:
- Tweaks to distortion limits on the RD optimization phase of twoloop
- Deeper search in twoloop
- PNS information marking to let twoloop decide when to use it
(turned out having the decision made separately wasn't working)
- Tonal band detection and priorization
- Better band energy conservation rules
- Strict hole avoidance
For rate control:
- Use psymodel's bit allocation to allow proper use of the bit
reservoir. Don't work against the bit reservoir by moving lambda
in the opposite direction when psymodel decides to allocate more/less
bits to a frame.
- Retry the encode if the effective rate lies outside a reasonable
margin of psymodel's allocation or the selected ABR.
- Log average lambda at the end. Useful info for everyone, but especially
for tuning of the various encoder constants that relate to lambda
feedback.
Psy:
- Do not apply lowpass with a FIR filter, instead just let the coder
zero bands above the cutoff. The FIR filter induces group delay,
and while zeroing bands causes ripple, it's lost in the quantization
noise.
- Experimental VBR bit allocation code
- Tweak automatic lowpass filter threshold to maximize audio bandwidth
at all bitrates while still providing acceptable, stable quality.
I/S:
- Phase decision fixes. Unrelated to #2686, but the bugs only surfaced
when the merge was finalized. Measure I/S band energy accounting for
phase, and prevent I/S and M/S from being applied both.
PNS:
- Avoid marking short bands with PNS when they're part of a window
group in which there's a large variation of energy from one window
to the next. PNS can't preserve those and the effect is extremely
noticeable.
M/S:
- Implement BMLD protection similar to the specified in
ISO-IEC/13818:7-2003, Appendix C Section 6.1. Since M/S decision
doesn't conform to section 6.1, a different method had to be
implemented, but should provide equivalent protection.
- Move the decision logic closer to the method specified in
ISO-IEC/13818:7-2003, Appendix C Section 6.1. Specifically,
make sure M/S needs less bits than dual stereo.
- Don't apply M/S in bands that are using I/S
Now, this of course needed adjustments in the compare targets and
fuzz factors of the AAC encoder's fate tests, but if wondering why
the targets go up (more distortion), consider the previous coder
was using too many bits on LF content (far more than required by
psy), and thus those signals will now be more distorted, not less.
The extra distortion isn't audible though, I carried extensive
ABX testing to make sure.
A very similar patch was also extensively tested by Kamendo2 in
the context of #2686.
This adds av_warn_unused_result whenever it is relevant.
Signed-off-by: Ganesh Ajjanagadde <gajjanagadde@gmail.com>
Signed-off-by: Ronald S. Bultje <rsbultje@gmail.com>
Fixes Ticket4922.
Commit 060102389e broke configure, since
the inversion ! was missed while converting the grep to a case
statement.
Reviewed-by: Nicolas George <george@nsup.org>
Reviewed-by: Timothy Gu <timothygu99@gmail.com>
Signed-off-by: Ganesh Ajjanagadde <gajjanagadde@gmail.com>
The versioning facility in the Solaris linker differs from Linux in 3 ways:
1. It does not support globs in linker scripts for
symbol versioning -- this is a GNU extension.
2. The linker argument is '-M', instead of '--version-script'.
3. It is picky about line endings.
Each symbol or directive must be on a line of it's own.
Let's use make_sunver.pl from GCC to generate a version script that works
correctly with the Solaris linker. It's function is to correctly expand the
globs in the original generated version script.
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
FFmpeg already tests for this case in configure_output_filter() and printed a
clearer error message
example:
./ffmpeg -f lavfi -i color -f lavfi -i color -filter_complex "[1]null[x],[0][1]overlay" -f null -
before the merge / after the revert:
Filter null has a unconnected output
after the merge / before the revert:
Output pad "default" with type video of the filter instance "Parsed_null_0" of null not connected to any destination
Error configuring complex filters.
Invalid argument
This reverts commit 3e3779cd51, reversing
changes made to 0b28039a44.
Reviewed-by: Ganesh Ajjanagadde <gajjanag@mit.edu>
This reduces the memory & cache need from 256 to 64 bytes
the code also seems faster with this change
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
This uses Stein's binary GCD algorithm:
https://en.wikipedia.org/wiki/Binary_GCD_algorithm
to get a roughly 4x speedup over Euclidean GCD on standard architectures
with a compiler intrinsic for ctzll, and a roughly 2x speedup otherwise.
At the moment, the compiler intrinsic is used on GCC and Clang due to
its easy availability.
Quick note regarding overflow: yes, subtractions on int64_t can, but the
llabs takes care of that. The llabs is also guaranteed to be safe, with
no annoying INT64_MIN business since INT64_MIN being a power of 2, is
shifted down before being sent to llabs.
The binary GCD needs ff_ctzll, an extension of ff_ctz for long long (int64_t). On
GCC, this is provided by a built-in. On Microsoft, there is a
BitScanForward64 analog of BitScanForward that should work; but I can't confirm.
Apparently it is not available on 32 bit builds; so this may or may not
work correctly. On Intel, per the documentation there is only an
intrinsic for _bit_scan_forward and people have posted on forums
regarding _bit_scan_forward64, but often their documentation is
woeful. Again, I don't have it, so I can't test.
As such, to be safe, for now only the GCC/Clang intrinsic is added, the rest
use a compiled version based on the De-Bruijn method of Leiserson et al:
http://supertech.csail.mit.edu/papers/debruijn.pdf.
Tested with FATE, sample benchmark (x86-64, GCC 5.2.0, Haswell)
with a START_TIMER and STOP_TIMER in libavutil/rationsl.c, followed by a
make fate.
aac-am00_88.err:
builtin:
714 decicycles in av_gcd, 4095 runs, 1 skips
de-bruijn:
1440 decicycles in av_gcd, 4096 runs, 0 skips
previous:
2889 decicycles in av_gcd, 4096 runs, 0 skips
Signed-off-by: Ganesh Ajjanagadde <gajjanagadde@gmail.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Proper names should be capitalized in all user facing API as far as
possible. The option names themselves have not been changed since:
1. We consistently keep option names in lower case.
2. Changing them would break existing scripts.
3. I suspect that we want to be similar to Sox and its relevant options.
The converse is also true: improper names should not be capitalized
generally.
Signed-off-by: Ganesh Ajjanagadde <gajjanagadde@gmail.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
During a build, a lot of *.o.-hash files are created - had not noticed
this as they are usually dumped in tmpfs on Linux. However, they
sometimes are present during a long build in the project directory, making it
annoying to commit while the project is being built.
These have been observed with Clang, -fsanitize-undefined on Arch Linux,
though other configurations may also generate such temporaries.
The solution here is on lines with the Linux kernel's .gitignore:
https://github.com/torvalds/linux/blob/master/.gitignore.
Signed-off-by: Ganesh Ajjanagadde <gajjanagadde@gmail.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Proper names should be capitalized in all user facing API as far as
possible. The option names themselves have not been changed since:
1. We consistently keep option names in lower case.
2. Changing them would break existing scripts.
The converse is also true: improper names should not be capitalized
generally.
Signed-off-by: Ganesh Ajjanagadde <gajjanagadde@gmail.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
This should fix the undefined behavior reported in:
https://trac.ffmpeg.org/ticket/4727.
I can reproduce this at runtime: simply stick in an abort call in
asym_quant to check if c < 0 and run FATE. I don't know ac3 so I can't
confirm if negative coefficients are intentional, but at the moment they
clearly are according to FATE.
This resolves the undefined behavior. Tested with FATE.
Signed-off-by: Ganesh Ajjanagadde <gajjanagadde@gmail.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
* commit '00cc10aee380f882507bac994ac469d8358d12e8':
asfdec: do not skip padding if offset is above packet size - padding
Merged-by: Hendrik Leppkes <h.leppkes@gmail.com>
* commit '8b830ee9a26d47b138f12a82085cdb372f407f1e':
avconv: Do not try to configure filter outputs without streams
Merged-by: Hendrik Leppkes <h.leppkes@gmail.com>
* commit 'd7a5a178c252b625537adc046392624ad543dea7':
configure: When disabling a library disable all the related components
Merged-by: Hendrik Leppkes <h.leppkes@gmail.com>
the pps offset is used to locate pps in the spspps_buf; however, the
current calc method is wrong because it is the offset of the original
avctx->extradata;
when there is only one sps in the avcc; the value is correct by
coincidence, however, it will fail in avcc with multi sps
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
This fixes a warning observed on Clang 3.7:
"warning: attribute 'deprecated' is ignored, place it after "struct" to apply attribute to type declaration [-Wignored-attributes]"
and thus enables deprecation warning for the relevant struct.
Signed-off-by: Ganesh Ajjanagadde <gajjanagadde@gmail.com>
Signed-off-by: Ronald S. Bultje <rsbultje@gmail.com>
This should fix the first undefined behavior reported in:
https://trac.ffmpeg.org/ticket/4727.
I can't reproduce the runtime behavior reported in the ticket, hence I
can't confirm that this actually fixes the exact issue reported in the
ticket.
Regardless, I can confirm that this is a genuine issue, and that
negative shifts can (and do) occur, fixed by this.
Tested with FATE.
Signed-off-by: Ganesh Ajjanagadde <gajjanagadde@gmail.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Currently only 2 profiles are evaluated because they are the only 2
with distributed test sequences.
- CID 1260: YUV 4:2:2 10 bits with block-adaptive interlace coding,
from ticket 4876;
- CID 1270: YUV 4:4:4 10 bits (HR), 1920x839, from ticket 4581.
They were generated from the ticket sequences by running the
following kind of command-line;
ffmpeg -i $INPUT -an -sn -vcodec copy -vframes 1 -y $OUTPUT.mov
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
On lines 1633,1634 FFABS(pts) is performed. However, if av_stream_get_end_pts
returns AV_NOPTS_VALUE always, pts remains stuck at INT64_MIN, leading
to undefined behavior on FFABS.
One could conceive of a solution using FFNABS. However, such a solution
has to deal with the implementation defined rounding of integer division
with at least one negative operand in ANSI C89. C99 forces truncation to
zero, but I am not sure that all of our platforms compile with full C99
support, and in particular whether we can safely assume a fixed
rounding behavior across all platforms.
This solution is simple, and I doubt changing INT64_MIN to INT64_MIN + 1
has any practical loss - if it is stuck at its initial value, the stream
is messed up anyway.
Signed-off-by: Ganesh Ajjanagadde <gajjanagadde@gmail.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
When trying to build the binary dct-test under MSYS2/Win64, the
makefile rule does not have the SUBDIR in the target for its
object file.
Consequently, modifications to various include files (e.g. C ones)
do not trigger a recompilation.
When tracing the dependency generating, the dependency generation
has this strange content (linebreak inserted):
sed -e "/^#.*/d" -e "s,^[[:space:]]*dct\\.o,libavcodec/dct.o," \
> libavcodec/dct-test.d
For some reason, the $(*F) has weird content. It looks simpler to
use $(@F) instead of $(*F)\\.o, although this was tested on one
single version of make.
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
There is not much reason to generate such a small table at runtime.
Signed-off-by: Derek Buitenhuis <derekb@vimeo.com>
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
The original interpolation algorithm behaved poorly on the borders and
did not even guarantee continuity at the borders. For this reason, a
second interpolation/blending pass was required on the borders to make
them seamless.
However, since the interpolation algorithm was improved in June 2013,
the border issues no longer exist. The new algorithm does guarantee
continuity at the borders, making the second pass useless. A larger
band always increases the cumulated interpolation error. In most cases
it also increases the average interpolation error, even though the
samples in the band are only partially interpolated.
For this reason I would like to get rid of the "band" parameter. As a
first step, let's change its default value from 4 to 1 and document it
as deprecated.
I have benchmarked this change on a combination of input sources and
realistic logo areas. Lowering the band value from 4 to 1 resulted in
8 to 39 % less interpolation error per frame (or 1 to 34 % less
interpolation error per luma sample.)
Signed-off-by: Jean Delvare <jdelvare@suse.de>
Signed-off-by: Stefano Sabatini <stefasab@gmail.com>
The MBAFF handling recently introduced on the decoder side shows that
the encoder does not support it correctly. Therefore, make the related
profile experimental.
Furthermore, current encoder logic treats it as unable to encode as
progressive, which isn't the case.
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
MBAFF-like handling of interlaced content in CID 1260 is different from
the other CIDs, and in particular doesn't use the same syntax.
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Profiles 1256 & 1270 (currently) signal at the frame header and MB
levels the colorspace used, either RGB or YUV. While a MB-level
varying colorspace is not supported, whether it is constant can be
tracked so as to determine the exact colorspace.
This requires having bitdepth and the ACT and 4:4:4 flags, in turn
needing the CID. Because setting those before having validated
enough things may result in invalid/unset DSP fucntions, setting
the bitdepth in the context is delayed.
It is not tested against a true RGB sequence, though.
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
This removes the requirement of calling w32thread_init before being
able to use the threading primitives.
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
The emulation uses native InitOnce* APIs on Windows Vista+, and a
lock-free/allocation-free approach using atomics and spinning for
Windows XP.
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
This way is sufficient to use the component specific configure variable
and not guard against the global library configure variable in code
that is outside it (e.g. checkasm).
place primary audio coding header data into DCAAudioHeader
structure to make DCAContext clearer
and move channel related data to DCAChan structure to make
them easier to use by extensions
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
Do not fail when original resolution is smaller than current one,
as the frame buffer is resized automatically.
Signed-off-by: Vittorio Giovara <vittorio.giovara at gmail.com>
Modified datatype of function argument (pitch from int32_t to ptrdiff_t)
Signed-off-by: Shivraj Patil <shivraj.patil@imgtec.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Modified sps and pps access from old HEVCContext(s) structure to newly introduced HEVCParamSets(ps)
Signed-off-by: Shivraj Patil <shivraj.patil@imgtec.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
The -threads option is ignored with libkvazaar since it does not have
any of the AV_CODEC_CAP_{FRAME,SLICE,AUTO}_THREADS capabilities. This
commit removes the incorrect documentation as well as the no-op of
setting the number of threads in libkvazaar encoder.
Signed-off-by: Arttu Ylä-Outinen <arttu.yla-outinen@tut.fi>
The divisor and dividend in the equation had been swapped, making the
result the inverse of the actual framerate.
Signed-off-by: Arttu Ylä-Outinen <arttu.yla-outinen@tut.fi>
Changes function libkvazaar_encode to return proper error codes instead
of crashing when the video dimensions or pixel format change in the
middle of encoding.
Signed-off-by: Arttu Ylä-Outinen <arttu.yla-outinen@tut.fi>
Function encoder_encode in Kvazaar API was changed to have new output
parameters: source picture and frame info. Frame info is used to set the
keyframe flag and source picture is ignored.
Signed-off-by: Arttu Ylä-Outinen <arttu.yla-outinen@tut.fi>
This saves one register in a few cases on 32bit builds with unaligned
stack (e.g. MSVC), making the code slightly easier to maintain.
(Can someone please test this on 32bit+msvc and confirm make fate-vp9
and tests/checkasm/checkasm still work after this patch?)
This patch moves the pointer validity check outside the macro,
and silences the -Waddress observed with GCC 5.2.
Note that this changes the error message slightly, from:
"bad option..." to "Error parsing option...".
Signed-off-by: Ganesh Ajjanagadde <gajjanagadde@gmail.com>
The structure is copied around and that triggers warnings if it is uninitialized
Fixes CID1322360
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
This fixes access to Grandstream cameras, which return 401 to ffmpeg
otherwise.
VLC sends Authorization: header with spaces between parameters, and it
is known to work with Grandstream devices and broad range of other HTTP
and RTSP servers, so author considers switching to such behaviour safe.
Just for record - RFC 2617 (HTTP Auth) does not specify the need in
spaces, so this is not a bug of FFmpeg.
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
This logs the SDL error messages on failure of creation of SDL_CreateMutex,
SDL_CreateCond, and SDL_CreateThread.
Signed-off-by: Ganesh Ajjanagadde <gajjanagadde@gmail.com>
Signed-off-by: Marton Balint <cus@passwd.hu>
GCC 3.4 introduced an attribute warn_unused_result to warn when a programmer
discards the return value. Applying this judiciously across the codebase can help
in fixing a lot of problems. At a high level, functions which return error codes
should always be checked. More concretely, consider the functions ff_add_format
and the like in avfilter/formats.h. A quick examination shows that a large portion
of libavfilter fails to handle the associated errors, usually AVERROR(ENOMEM).
The above example was where I observed the utility of this, but it should be
useful in many places across the code base.
Signed-off-by: Ganesh Ajjanagadde <gajjanagadde@gmail.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
These are DNxHR profiles with the following properties:
- Variable size in a profile (property added in a previous commit),
requiring variable-sized macroblock table;
- Variable bitdepth, up to 12 bits.
- Better validation of buffer sizes and positions
Signed-off-by: Christophe Gisquet <christophe.gisquet@gmail.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
This a 4:4:4 10 bits profile, where image size is not fixed by the
profile, and which strays a bit outside the old frame header parsing
code.
Fixes ticket #4581 (DNxHR is not stricly supported, but that sequence is).
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Currently not used, but will be used to indicate that a CIDEntry field
is not set, because it is variable, and that checks should be adapted.
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Move the 'interlaced' flag to this element (arbitrarily set to 16bits).
This should allow better detection/selection of profiles.
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
* commit '39f01e346cab464ef6c0d4ec58cc13b7123e60d8':
mmaldec: be more tolerant against MMAL not returning decoded output
Merged-by: Hendrik Leppkes <h.leppkes@gmail.com>
* commit '65db4899fa8790049bec3af16ecdb75dd81051fd':
mmaldec: refactor to have more context per MMAL input buffer
Merged-by: Hendrik Leppkes <h.leppkes@gmail.com>
* commit 'eae58428bd199f7d4670bf471f56ed204430878e':
avcodec: Do not lock during open for codecs marked as having threadsafe init
Merged-by: Hendrik Leppkes <h.leppkes@gmail.com>
* commit 'abe9adfb31566c415fd830a8d4977c79512d4385':
rangecoder: Use AV_RB16 instead of bytestream_get_be16
Merged-by: Hendrik Leppkes <h.leppkes@gmail.com>
* commit '10aa6f9db44e96977e7155fdc3e62619e0e00a15':
h264: Use the correct argument context in debug log
Merged-by: Hendrik Leppkes <h.leppkes@gmail.com>
* commit '4628443ca3534060888dd0015b229337eac13fd2':
h263: Drop uninitialized variable use from log message
Merged-by: Hendrik Leppkes <h.leppkes@gmail.com>
* commit 'bb198c4997d5036f3bf91de51e44f807115677d0':
d3d11va: make av_d3d11va_alloc_context() available at all times
Merged-by: Hendrik Leppkes <h.leppkes@gmail.com>
* commit '8bb376cf6b4ab8645daedb8becaa7163656436a4':
checkasm: Fix the function name sorting algorithm
Merged-by: Hendrik Leppkes <h.leppkes@gmail.com>
In some situations, MMAL won't return a decoded frame for certain input
frames. This can happen if a frame fails to decode, or if a packet does
not actually contain a complete frame. In these situations, we would
deadlock (or actually timeout) waiting for an expected output frame,
which is not ideal. On the other hand, there are situations where we
definitely have to block to avoid deadlocks. (This mess is a
consequence of trying to map MMAL's asynchronous and flexible
dataflow to libavcodec, which is more static and rigid.)
Solve this by doing a blocking wait only if the amount of buffered data
is too big. The whole purpose of the blocking wait is to avoid excessive
buffering of input data, so we can skip it if it appears to be low. The
consequence is that libavcodec can gracefully return no frame to the
API user.
We want to track the number of full packets to make our heuristic work.
But MMAL buffers are fixed-size, requiring splitting large packets. This
is why the previous commit is needed. We use the ..._FRAME_END flag to
remember packet boundaries, but MMAL does not preserve these buffer
flags when returning buffers to the user.
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
The next commit needs 1 bit of additional information per MMAL buffer
sent to the MMAL input port. This information will be needed when the
buffer is recycled (i.e. returned by the input port's callback).
Normally, we could use MMAL_BUFFER_HEADER_FLAG_USER0, but that is
unexpectedly not preserved.
Do this by storing a pointer to FFBufferEntry in the MMAL buffer's
user data, instead of an AVBufferRef. This also changes the lifetime
of FFBufferEntry.
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
Glibc 2.20 onwards generates a deprecation warning for usage of _BSD_SOURCE and _SVID_SOURCE.
The solution from man feature_test_macros is to define both _DEFAULT_SOURCE and the old macros.
This solution is on the lines of the one in commit af1818276e.
Signed-off-by: Ganesh Ajjanagadde <gajjanagadde@gmail.com>
Signed-off-by: Ronald S. Bultje <rsbultje@gmail.com>
The intended meaning is "if this block is the first block in a slice then
its left boundary is a slice boundary". Silence a logical-not-parentheses
warning from gcc.
Silence a warning due to frame assignment in dvenc. All uses of the
reference in dvdec are read only, except the ones in the main decoding
function, so use the frame pointer directly there.
Currently, errors are thrown for various macros while building that are completely bogus.
They occur during the dependency (.d) generation phase, and have no bearing on the compiled output,
since only the stdout is piped into the sed command to generate the .d files.
They basically occur as the relevant -I paths are not (and cannot be passed) during
the dependancy generation phase.
As such, this patch silences them.
Signed-off-by: Ganesh Ajjanagadde <gajjanagadde@gmail.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
They're short enough that inlining them actually reduces code size due to
all the overhead associated with making a function call.
Signed-off-by: Anton Khirnov <anton@khirnov.net>
"language" is not an offical matroska tag.
Track languages are specified with the MATROSKA_ID_TRACKLANGUAGE ebml.
Writing the tag overrides the ebml specified language during playback with
libav and some other players.
Signed-off-by: Anton Khirnov <anton@khirnov.net>
This will give incorrect results in some cases due to not parsing segments
separately, so it currently requires -strict experimental.
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
* commit 'd0a3e89d41b05f9ed0e7401c352b60ed4f4d1ed5':
dcadec: make a number of samples per subband per subsubframe a named constant
Merged-by: Hendrik Leppkes <h.leppkes@gmail.com>
This error was produced by rtmproto.c, it is possibly such streams
where dumped, this commit is needed to support them
Fixes: z0e.flv
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
This affects Annex B streams (such as demuxed from .ts and others). It
also handles the format change in reinit-large_420_8-to-small_420_8.h264
correctly.
Instead of passing through the extradata, create it on the fly it from
the currently active SPS and PPS. Since reconstructing the PPS and SPS
NALs would be very complicated and verbose, we use the NALs as they
originally appeared in the bitstream.
The code for writing the extradata is somewhat derived from
libavformat/avc.c, but it's small and different enough that sharing it
is not really worth it.
We assume an upper bound of 4096 bytes for each raw SPS/PPS. It's hard
to determine an exact maximum size, but this value was was considered
high enough and safe.
Needed for the following VideotoolBox commit.
The current one, while correct, does not yield the best possible
results. The specificiations suggest another formula, which results
in quality gains in the decoded output from fate tests. This
justifies changing said formula.
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
CID 1256 is specified as using the same table for luma and chroma,
which is the same as CID 1235 luma table. This is consistent with
the format supposedly being RGB, although most sequences seem to
actually be YCbCr-encoded.
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Signed-off-by: Vittorio Giovara <vittorio.giovara@gmail.com>
Tables 1258 and 1259 were not zigzagged when added, so it was not
possible to notice the equivalence.
Signed-off-by: Vittorio Giovara <vittorio.giovara@gmail.com>
Convert them to zigzag order, as the rest of them are.
When I was adding support for 10-bit DNxHD, I just copy-pasted the
missing quant matrices from the spec. Now it turns out the existing
matrices in dnxhddata.c were in zigzag order. This resulted in wrong
quantization for 10-bit DNxHD. The attached patch fixes the problem by
converting 10-bit quant matrices to zigzag order.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
It is only (mis-)used to set the dsp fucntions clear_block(s). But
these functions always work on 16bits-wide elements, which make
the parameter useless and actually harmful, as it causes all content
on more than 8-bits to not use accelerated functions.
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
This should fix RTMP input which was broken by cbbd906be6
the 40 + 11 case is untested as it did not occur in the testcase
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
When forwarding the frame type information, by default x264 can
decide which kind of keyframe output, add an option to force it
to output IDR frames in to support use-cases such as preparing
the content for segmented streams formats.
x264 build 147 adds the native support for NV21.
Useful to avoid additional pixel format conversion when encoding
from a wide range of capture devices, Android among those.
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
Fixes deadlock with threads
Found-by: Paul B Mahol
Reviewed-by: Paul B Mahol <onemda@gmail.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
The variable is not a constant and can lead to race conditions
Fixes: repro.webm (not reproducable with FFmpeg alone)
Found-by: Dale Curtis <dalecurtis@google.com>
Tested-by: Dale Curtis <dalecurtis@google.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
These field are difficult to interpret, and are provided by a single
encoder (mpegvideoenc). In general they do not belong to a structure
containing raw data only, so remove them from AVFrame.
Mpegvideoenc now uses a private field in Picture for its internal
computations.
Signed-off-by: Vittorio Giovara <vittorio.giovara@gmail.com>
Commits 43bc5cf9 and c5371f77 add code for skipping initial zeros in mp3
packets. This code forgot to report to the user that data was skipped at
all.
Since audio codecs allow partial packet decoding, the user application
has to rely on the return value. It will remove the data reported as
consumed by the decoder, and feed it to the decoder again. This resulted
in the mp3 frame after the zero region to be decoded over and over
again, until the zero region was finally skipped by the application.
Fix this by including the amount of skipped bytes to the number of
consumed bytes returned by the decode call.
Fixes trac ticket #4890.
The DDTS atom is defined in ETSI TS 102 114, v1.4.1, Annex E.
This is useful for DTS-HD formats, some of which cannot be
decoded by dcadec.c or libdcadec.
Signed-off-by: Shawn Singh <shawnsingh@google.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
CID 1256 is specified as using the same table for luma and chroma,
which is the same as CID 1235 luma table. This is consistent with
the format supposedly being RGB, although most sequences seem to
actually be YCbCr-encoded.
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
VideoToolbox also implements a software decoder for h264, and will fallback to
using it if the file cannot be decoded on the GPU. In these cases though,
we want the hwaccel to fail so that we can use the libavcodec software decoder
instead of the Apple one.
Signed-off-by: wm4 <nfxjfg@googlemail.com>
* commit 'c9943f00cfa2471d1b8a3a9ddc7a21049a71090e':
vf_framepack: Use av_image_copy() where appropriate
Merged-by: Hendrik Leppkes <h.leppkes@gmail.com>
* commit 'e94e651c762f90ac5fd2dc9bd3ba1336a77d5b5c':
dnxhddec: Enable frame threading
FFmpeg has much more threading modes for DNxHD
Merged-by: Hendrik Leppkes <h.leppkes@gmail.com>
* commit 'b5e4f393b6757629281f58c3f3f6d55ca522ab60':
avconv: Make the private options discovery more manifest
Merged-by: Hendrik Leppkes <h.leppkes@gmail.com>
* commit '4885bde3187a2bb0cae85b67796e07db233bf77f':
motion_est_template: Fix undefined left shift of negative number
Merged-by: Hendrik Leppkes <h.leppkes@gmail.com>
* commit '977f41e274a66c9d257186ca1df8373a09cc4d40':
mlpdec: Fix a undefined left shift of negative number
Merged-by: Hendrik Leppkes <h.leppkes@gmail.com>
* commit '948f3c19a8bd069768ca411212aaf8c1ed96b10d':
lavc: Make AVPacket.duration int64, and deprecate convergence_duration
Merged-by: Hendrik Leppkes <h.leppkes@gmail.com>
* commit 'd00bb8addccb63fa3feacb06d2a310731dc0113b':
mips: intreadwrite: Only execute that code for mips r1 or r2
Not merged, as FFmpeg has a separate condition to protect this code.
Merged-by: Hendrik Leppkes <h.leppkes@gmail.com>
* commit '1016a75cf3170648dc9b59fdef170cbfc142f8ad':
configure: mips: Support mips r6, r2 and r1
Not merge, as MIPS support in ffmpeg is handled
quite differently and I do not have an env to test.
Merged-by: Hendrik Leppkes <h.leppkes@gmail.com>
This correctly adjust chroma subsampling for column interleaved mode,
and allows future high bitdepth support.
Signed-off-by: Vittorio Giovara <vittorio.giovara@gmail.com>
This bit is 1 in some samples, and seems to coincide with interlaced
mbs and CID1260. 2008 specs do not know about it, and maintain qscale
is 11 bits. This looks oversized, but may help larger bitdepths.
Currently, it leads to an obviously incorrect qscale value, meaning
its syntax is shifted by 1. However, reading 11 bits also leads to
obviously incorrect decoding: qscale seems to be 10 bits.
However, as most profiles still have 11bits qscale, the feature is
restricted to the CID1260 profile (this flag is dependent on
a higher-level flag located in the header).
The encoder writes 12 bits of syntax, last and first bits always 0,
which is now somewhat inconsistent with the decoder, but ends up with
the same effect (progressive + reserved bit).
Signed-off-by: Vittorio Giovara <vittorio.giovara@gmail.com>
Note that convergence_duration had another meaning, one which was in
practice never used. The only real use for it was a 64 bit replacement
for the duration field. It's better just to make duration 64 bits, and
to get rid of it.
Signed-off-by: Vittorio Giovara <vittorio.giovara@gmail.com>
* commit '678f788fea3380e5cbbf75baac5cc0ce07a56a42':
configure: Set the initial ldflags to match the cflags
Merged-by: Hendrik Leppkes <h.leppkes@gmail.com>
* commit '539e5ac2ecfec2e2f441222a43fb0583643ea607':
examples/qsvdec: free the lavc decoder before closing MFX/VAAPI
Merged-by: Hendrik Leppkes <h.leppkes@gmail.com>
* commit '3ee462dca1038e63b8e8d5e751121736d5772a5d':
examples/qsvdec: do not free the surfaces in the frame_free() callback
Merged-by: Hendrik Leppkes <h.leppkes@gmail.com>
* commit '83847cc8fa97e0fc637a0962bafb837acdb6eacc':
qsvenc: do not try to close the encoder if the session is NULL
Merged-by: Hendrik Leppkes <h.leppkes@gmail.com>
* commit 'ae25413daf42a06f078ed81bb545ec23a8e0b482':
lavfi: do not exclude hwaccel formats from ff_all_formats()
Merged-by: Hendrik Leppkes <h.leppkes@gmail.com>
MIPS R6 supports unaligned memory access and does not have
the load/store-left/right family of instructions.
Signed-off-by: Vicente Olivert Riera <Vincent.Riera at imgtec.com>
Signed-off-by: Luca Barbato <lu_zero at gentoo.org>
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
Some gcc-based toolchain would fail to link if the abi set by the
cpuflags does not match the default.
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
File libopenh264enc.c has been modified so that the encoder uses av_log()
to log messages (error, warning, info, etc.) instead of logging them
directly to stderr. At the time the encoder is created, the current
libav log level is mapped to an equivalent libopenh264 log level. This
log level, and a message logging function that invokes av_log() to
actually log messages, are then set on the encoder.
This contains further changes and simplifications by Michael Niedermayer
and Martin Storsjö.
Signed-off-by: Martin Storsjö <martin@martin.st>
In case of resync, always free the packet, but retry only if the resync
did not get to the end of the file. Otherwise, there is a memory leak when the
last packet in the file is corrupted.
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
The System V ABI on x86-64 specifies that the al register contains an upper
bound of the number of arguments passed in vector registers when calling
variadic functions, so we aren't allowed to clobber it.
checkasm_fail_func() is a variadic function so also zero al before calling it.
Signed-off-by: Anton Khirnov <anton@khirnov.net>
The code assumed that the outermost interpolated pixels were always in
the fuzzy area defined by the band option. However if the band value
is small, there may be no fuzzy area on a given plane. In that case,
option show did not work, no rectangle was drawn (or only on the luma
plane, depending on the band value and chroma plane subsampling
factors.)
Fix the problem by not making any assumption on where the outermost
interpolated pixels will be.
The new code was verified to produce the same result as the original
code when the band value is not small.
Signed-off-by: Jean Delvare <jdelvare@suse.de>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Tested functions are internally kept in a binary search tree for efficient
lookups. The downside of the current implementation is that the tree quickly
becomes unbalanced which causes an unneccessary amount of comparisons between
nodes. Improve this by changing the tree into a self-balancing left-leaning
red-black tree with a worst case lookup/insertion time complexity of O(log n).
Significantly reduces the recursion depth and makes the tests run around 10%
faster overall. The relative performance improvement compared to the existing
non-balanced tree will also most likely increase as more tests are added.
Signed-off-by: Anton Khirnov <anton@khirnov.net>
It appears vdpau drivers can return constrained baseline as unsupported,
even if libvdpau knows about the symbol, and the main profile is
supported.
Signed-off-by: Anton Khirnov <anton@khirnov.net>
Note that this slightly changes behavior: it sets AVMEDIA_TYPE_UNKNOWN
if the codec type is unknown. This should be ok.
Signed-off-by: Anton Khirnov <anton@khirnov.net>
The appropriate flag for HEASLR (--high-entropy-va) was added in
binutils 2.25.
Also set the image base >4GB so higher entropy gets applied to image
base randomization when used with HEASLR (8 -> 17 bits of
randomization). Windows does this for compatibility because of "latent
pointer truncation issues".
Signed-off-by: Alex Smith <alex.smith@warpsharp.info>
This function can intrinsically not deal with codec profile fallback
(for H.264 Constrained Baseline especially), and was made redundant
by av_vdpau_bind_context().
Signed-off-by: Anton Khirnov <anton@khirnov.net>
Each line is padded by the format, and errors are now reported and
stop the decoding. Around 5% speedup.
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
This is a feature heavily inspired by the mpv player. At the moment, methods
for adjusting volume in ffplay are rather clumsy: either one needs to set it
system-wide, or one needs to set it via the volume filter.
This patch adds key bindings identical to the mpv defaults for muting/unmuting
and increasing/decreasing the volume interactively without any introduction of
external dependencies.
TODO: doc update, possible mouse button bindings (mpv has this).
Signed-off-by: Ganesh Ajjanagadde <gajjanagadde@gmail.com>
Signed-off-by: Marton Balint <cus@passwd.hu>
Default field order to top field first when interlaced frame is detected and pic_struct_present_flag is not set.
Since bottom field first comes from the old NTSC standard and is not used with HD anymore I think it´s straight forward to favor the majority.
Signed-off-by: Thomas Mundt <loudmax@yahoo.de>
Reviewed-by: Kieran Kunhya <kierank@obe.tv>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
The System V ABI on x86-64 specifies that the al register contains an upper
bound of the number of arguments passed in vector registers when calling
variadic functions, so we aren't allowed to clobber it.
checkasm_fail_func() is a variadic function so also zero al before calling it.
There's no reason for it. ASLR will rebase it regardless so "preventing
collisions" isn't really relevant. This also brings it in line with
what a msvc produced dll will have (an image base of 0x10000000).
Signed-off-by: Alex Smith <alex.smith@warpsharp.info>
Reviewed-by: Hendrik Leppkes <h.leppkes@gmail.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
filename was set to an arbitrary 1024 characters. ffplay would thus be unable to
play files whose name exceeds that arbitrary threshold.
This patch dynamically allocates and frees the filename buffer to remove such
limitations.
Signed-off-by: Ganesh Ajjanagadde <gajjanagadde@gmail.com>
Signed-off-by: Marton Balint <cus@passwd.hu>
Around 3x speedup with 4 threads. Maybe more mb lines should be
batched per thread, but that's good enough for a first try.
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Key repeats have been introduced simply because they improve usability in my
experience for volume, brightness, and other such controls by speeding up the
time taken to go from 0 to max intensity. As a side benefit, this enables rapid
seeking through a file via left/right keys.
Signed-off-by: Ganesh Ajjanagadde <gajjanagadde@gmail.com>
Signed-off-by: Marton Balint <cus@passwd.hu>
They were added to binutils in the same version so it's safe to combine.
Signed-off-by: Alex Smith <theryuu@warpsharp.info>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Indicates a YCbCr->RGB transform at the block level. Although nothing
explicitly states it, this would assume the actual content is planar
RGB.
Currently unsupported, but the one sequence I found using it flagged
every mb that way, actually meaning the content was YCbCr, and thus
best left to the output format to decide what to do of it.
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
It currently only applies to CID 1260, but this flag is dependent on
a higher-level flag located in the header.
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Tested functions are internally kept in a binary search tree for efficient
lookups. The downside of the current implementation is that the tree quickly
becomes unbalanced which causes an unneccessary amount of comparisons between
nodes. Improve this by changing the tree into a self-balancing left-leaning
red-black tree with a worst case lookup/insertion time complexity of O(log n).
Significantly reduces the recursion depth and makes the tests run around 10%
faster overall. The relative performance improvement compared to the existing
non-balanced tree will also most likely increase as more tests are added.
* commit 'bbf71d46db3417b43bcbd745cbf235e8e2ff69ae':
dxv: Print texture information after header parsing
Merged-by: Hendrik Leppkes <h.leppkes@gmail.com>
CID 1260 (as evidenced by incorrect decoding of a sample from ticket
4876) seems to use incorrect weight tables. It appears those tables
were not zigzag-scanned.
Apply zigzag on weight tables for new CIDs 1258, 1259, and 1260, and
fix an incorrect chroma table for CID 1256.
Fixes last issue from ticket #4876.
Found-by: Christophe Gisquet <christophe.gisquet@gmail.com>
Signed-off-by: Christophe Gisquet <christophe.gisquet@gmail.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
This bit is 1 in some samples, and seems to coincide with interlaced
mbs and CID1260. 2008 specs do not know about it, and maintain qscale
is 11 bits. This looks oversized, but may help larger bitdepths.
Currently, it leads to an obviously incorrect qscale value, meaning
its syntax is shifted by 1. However, reading 11 bits also leads to
obviously incorrect decoding: qscale seems to be 10 bits.
However, as most profiles still have 11bits qscale, the feature is
restricted to the CID1260 profile.
The encoder writes 12 bits of syntax, last and first bits always 0,
which is now somewhat inconsistent with the decoder, but ends up with
the same effect (progressive + reserved bit).
Partially fixes ticket #4876.
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
This patch tweaks search_for_pns to be both more
aggressive and more careful when applying PNS. On
the one side, it will again try to use PNS on zero
(or effectively zero) bands. For this, both zeroes
and band_type have to be checked (some ZERO bands
aren't marked in zeroes). On the other side, a more
accurate rate-distortion measure avoids using PNS
where it would cause audible distortion.
Also fixed a small bug in the computation of freq
that caused PNS usage on low-frequency bands during
8-short windows. This allows re-enabling PNS during
8-short.
AVBufferRef.data and AVPacket.data don't need to have the same value.
AVPacket could point anywhere into the buffer. Likewise, the sizes
don't need to be the same.
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
This works only for extradata sizes up to 128 bytes. Additionally, I
could never actually see it doing anything. The new code using
MMAL_BUFFER_HEADER_FLAG_CONFIG now takes care of this.
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
We can send mp4-style data directly. But for some reason, this requires
sending the extradata as buffer with MMAL_BUFFER_HEADER_FLAG_CONFIG
set. Reuse the infrastructure for sending AVPackets to do this.
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
The sample position is made weird and non-nominal to force catching
such issues as default values or specialized operations hiding
issues in corner cases.
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
For yuv420p, the chroma position is unilaterally overriden, even
if ffmpeg's command-line explicitly set it. To fix this, override
only if the value is the default one.
Regression since 1515bfb3.
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
This patch modifies the encode frame function to
retry encoding the frame when the resulting bit count
is too far off target, but only adjusting lambda
in small, incremental step. It also makes the logic
more conservative - otherwise it will contend with
bit reservoir-related variations in bit allocation,
and result in artifacts when frame have to be truncated
(usually at high bit rates transitioning from low
complexity to high complexity).
Binutils will always strip the relocation information from executable
files even if it needs it (dynamicbase/ASLR). We can work around this
by using the pic-executable flag combined with setting the correct entry
point since apparently ld forgets what that should be. This problem
affects both 32 and 64-bit mingw-w64.
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Reduces the number of times the vbv retry code is used and should have no
effect on quality
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
If there is no #EXT-X-BYTERANGE specified, there is no need to seek.
Seeking fails anyway for rtmp, because this protocol does not support
url_seek.
This fixes CNN.m3u from trac ticket 4797 (i.e. Debian bug #798189).
Reviewed-by: wm4 <nfxjfg@googlemail.com>
Signed-off-by: Andreas Cadhalpun <Andreas.Cadhalpun@googlemail.com>
If cmd_pos is broken, this would just keep accumulating packets in the
reassembly buffer, until it fails and flushes the buffer on overflow.
Since packets are usually rather small, this will take a lot of subtitle
packets. The perceived effect is that subtitles are not displayed
anymore after the faulty packet was passed to the decoder.
I'm not terribly sure about this, but on the other hand this code is
active only when fragmented packets need to be reassembled.
Fixes sample file in trac issue #4872.
Assuming the first and second packets are partial, this would append the
reassembly buffer (ctx->buf) to itself with the second
append_to_cached_buf() call, because buf is set to ctx->buf.
I do not know a valid sample file which triggers this, and do not know
if packets can be split into more than 2 sub-packets, but it triggered
with a (differently) broken sample file in trac issue #4872.
Broken by commit ba12ba859a. This only
happens with HLS streams which use encryption and require preserving
cookies sent by the server.
Fixes trac issue #4846.
Some .idx files actually contain duplicate subtitle events:
timestamp: 00:07:52:600, filepos: 00004e800
timestamp: 00:07:52:600, filepos: 00004f800
The second will be dropped, because it has same pts, duration, and text
(the text is just a dummy empty string; the real data is retrieved when
actually reading vobsub subtitle packets).
Dropping this is probably not intended/safe, so avoid it.
See trac issue #4872 for a sample. This patch doesn't fix decoding of
the sample, though.
The stream ID is essentially an arbitrary number defined by the .idx
file headers. They have to match the IDs in the .sub stream. The vobsub
demuxer assumed the IDs would just start from 0, increassing by 1 for
each stream. This is not correct. In the sample I had, the IDs were
starting from 1, leading to no subtitles being displayed at all.
Fix this by using the correct stream ID.
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
If tput is not found for colorizing, error message should be squashed.
Signed-off-by: Ganesh Ajjanagadde <gajjanagadde@gmail.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
It requires a loop in filters or the framework,
that makes the scheduling less efficient and more complex.
This is purely an internal change since the loop is now
present in buffersink.
Note that no filter except buffersink did rely on the requirement.
Do not assume that ff_request_frame() returning success
implies a frame has arrived in the FIFO.
Instead, just loop until a frame is in the FIFO.
It does not change anything since the same loop is present
in ff_request_frame(), confirmed by an assertion.
The randomize_buffer() implementation assures that "most of the time",
we'll do a good mix of wide16/wide8/hev/regular/no filters for complete
code coverage. However, this is not mathematically assured because that
would make the code either much more complex, or much less random.
lpd.buf is non-const and discards the const qualifier of zerobuffer.
This fixes -Wdiscarded-qualifiers observed with a variety of compilers, including GCC 5.2.
Note that this does not change the type of zerobuffer, and merely makes the intent explicit.
Signed-off-by: Ganesh Ajjanagadde <gajjanagadde@gmail.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Dimensions / pixel formats for scaling must be set through the -s / pix_fmt options
or the scale / format filters. Otherwise there are mismatches between whet is
in/output to the scaler and for what the scaler is configured
Fixes Ticket4856
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
With the move of some functions into templates
in aaccoder_twoloop.h and aaccoder_trellis.h,
make checkheaders started failing. Add them to
SKIPHEADERS as should be.
hyscale, hcscale are only used in old filter code, hence place
header guard to silence -Wunused-function.
Signed-off-by: Ganesh Ajjanagadde <gajjanagadde@gmail.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
This resolves implementation defined behavior, and also silences -Wabsolute-value in clang 3.5+.
Moreover, the generated asm is identical to before modulo nop padding.
Signed-off-by: Ganesh Ajjanagadde <gajjanagadde@gmail.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
faster initialization and less code
slightly different result computationally from previous
coeffclamp option is ignored
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
* commit 'e3d4784eb31b3ea4a97f2d4c698a75fab9bf3d86':
d3d11va: WindowsPhone requires a mutex around ID3D11VideoContext
Merged-by: Hendrik Leppkes <h.leppkes@gmail.com>
* commit '4a664224502b42e3b28949d905a8de7769892184':
pixfmt: Add new SMPTE color primaries and transfer characteristic values
Merged-by: Hendrik Leppkes <h.leppkes@gmail.com>
* commit '777885983533235ccda5145f96317fc8cd0a18ab':
dcadec: set channel layout in a separate function
Merged-by: Hendrik Leppkes <h.leppkes@gmail.com>
* commit '971177f751a6e2931232accceab438bce277bde8':
dcadec: scan for extensions in a separate function
Merged-by: Hendrik Leppkes <h.leppkes@gmail.com>
Add an allowed parameter to -h and --help avconv option to print private
options from a codec, format, or filter, named with the provided input
value.
In case multiple classes are found (eg. mov demuxer and mov muxer, or
h264 decoder and h264 demuxer) print all options from all classes.
It is possible to select the type of class to print by adding it
before the name (eg. demuxer:mov and muxer:mov, or decoder:h264and
demuxer:h264).
Signed-off-by: Vittorio Giovara <vittorio.giovara@gmail.com>
This patch refactors the AAC coders to reuse code
between the MIPS port and the regular, portable C code.
There were two main functions that had to use
hand-optimized versions of quantization code:
- search_for_quantizers_twoloop
- codebook_trellis_rate
Those two were split into their own template header
files so they can be inlined inside both the MIPS port
and the generic code. In each context, they'll link
to their specialized implementations, and thus be
optimized by the compiler.
This approach I believe is better than maintaining
several copies of each function. As past experience has
proven, having to keep those in sync was error prone.
In this way, they will remain in sync by default.
Also, an implementation of the dequantized output
argument for the optimized quantize_and_encode
functions is included in the patch. While the current
implementation of search_for_pred still isn't using
it, future iterations of main prediction probably will.
It should not imply any measurable performance hit while
not being used.
Failing earlier causes the context to be insufficiently initialized which
can break decoding future frames with threads
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
gamma_convert is only used with the old code. Thus, it is
placed under a header guard. This patch silences a -Wunused-function
observed on GCC 5.2.
Signed-off-by: Ganesh Ajjanagadde <gajjanagadde@gmail.com>
lpd.buf is non-const and discards the const qualifier of zerobuffer.
This fixes -Wdiscarded-qualifiers observed with GCC 5.2.
Signed-off-by: Ganesh Ajjanagadde <gajjanagadde@gmail.com>
* commit '3c525b8b4770c1ac5f466a12c5523802bd5d40eb':
rtpdec: Increase the max size of the jitter buffer to 500 packets
Merged-by: Hendrik Leppkes <h.leppkes@gmail.com>
* commit '95a41311ac3a44773cc4dc407408aca35b1f8e26':
jpeg2000: Factor out band stepsize initialization
Merged-by: Hendrik Leppkes <h.leppkes@gmail.com>
* commit '1b709f23fb5f505c834d4c855703225795def01d':
jpeg2000: Refactor decode_packets
Not merged, as the ffmpeg code is much more advanced.
Merged-by: Hendrik Leppkes <h.leppkes@gmail.com>
* commit '41bcc3d15204f290400ba02e4e8f87fc07bcc00e':
jpeg2000: Split codeblock decoding from the main tile decoding
Merged-by: Hendrik Leppkes <h.leppkes@gmail.com>
* commit '6536da7371b4847a2824ed46b98829f127f24dad':
doc: Add travis badge
Not merged as ffmpeg does not have travis officially setup.
Merged-by: Hendrik Leppkes <h.leppkes@gmail.com>
* commit '5d14cf199990cd378904a2618b5c72c4b02290f6':
mpegvideo: Make sure mpegutils.h is included where needed
Merged-by: Hendrik Leppkes <h.leppkes@gmail.com>
* commit '525f58977c93e189fda49a5c4928feaf4d89fac6':
mpegvideo: Move macros to more appropriate headers
Merged-by: Hendrik Leppkes <h.leppkes@gmail.com>
* commit '285fe5b098c8fbefaed4aacdb839b760a5b7f20d':
avfilter: Support both syntaxes for the scale filter
Not merged, ffmpeg has much more flexible option handling
Merged-by: Hendrik Leppkes <h.leppkes@gmail.com>
* commit '18adc1fd3bb739a240c59f87ec6837fdfa89d32e':
avconv_filter: Use full named options
Not merged, as ffmpeg option syntax is quite different.
Merged-by: Hendrik Leppkes <h.leppkes@gmail.com>
packets are queued due to packet reordering until the queue reach its
maximal size or max delay is reached.
This commit adds a warning trace when max delay is reached.
Signed-off-by: Eloi BAIL <eloi.bail@savoirfairelinux.com>
Signed-off-by: Martin Storsjö <martin@martin.st>
This commit print as AV_LOG_VERBOSE the jitter buffer
size. It might be the default value or the value set by application.
Signed-off-by: Eloi BAIL <eloi.bail@savoirfairelinux.com>
Signed-off-by: Martin Storsjö <martin@martin.st>
This commit adds a warning trace when jitter buffer
is full. It helps to understand leading decoding issues.
Signed-off-by: Eloi BAIL <eloi.bail@savoirfairelinux.com>
Signed-off-by: Martin Storsjö <martin@martin.st>
op== is confusing, as it may easily be mistook for an equality check,
while in reality it is doing an assigment to '='.
This patch has the additional benefit of cleaning up 2 warnings from shellcheck.net.
Signed-off-by: Ganesh Ajjanagadde <gajjanagadde@gmail.com>
This fixes cases where the shifted number is 64, but we shifted non-
zero numbers away in the shift. The change makes behaviour consistent
with libvpx.
This commit adds an error trace when jitter buffer
is full. It helps to understand leading decoding issues.
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
This commit print as AV_LOG_INFO the jitter buffer
size. It might be the default value or the value set by application.
Signed-off-by: Eloi BAIL <eloi.bail@savoirfairelinux.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Since the actual max length of the jitter buffer is restricted by
max_delay, this shouldn't harm the overall latency (assuming that
max_delay is set properly), while allowing packet reordering with
a larger number of packets (which may be required with high bitrate
video).
Signed-off-by: Martin Storsjö <martin@martin.st>
Code in aaccoder_mips.c was not synced with changes in aaccoder.c for
some time.
That was cause for some fate-aac tests failing.
This patch fixes the problems.
Optimizations disabled in 933309a are enabled again.
Signed-off-by: Nedeljko Babic <nedeljko.babic@imgtec.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
"int" is useful in testing because provides accurate results across
different plaftforms, so remove it from the scheduled FF_API_UNUSED_MEMBERS
deprecation.
This introduces a slight timebase computation difference in zmbv-8bit
fate test. This is expected since the new options are double instead
of ints, and the additional precision skews the results in a non
meaningful way.
Deprecate the now unused option, but temporarily retain the capability
to disable the now default behaviour.
Mention this change in the AVPacket documentation.
Signed-off-by: Vittorio Giovara <vittorio.giovara@gmail.com>
This also drops setting the frame->pts field. This is usually not set by
decoders, so this would be an inconsistency that's at worst a danger to
the API user.
It appears the buffer->dts field is normally not set by the MMAL
decoder, so don't use it. If it's ever going to be set by MMAL, we
don't know whether the value will be what we want.
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
The generic code in utils.c sets the AVFrame.pkt_dts field from the
packet it was supposedly decoded. This does not have to be true for a
fully asynchronous decoder like mmaldec. It could be overwritten with an
incorrect value. Even if the decoder doesn't determine the DTS (but sets
it to AV_NOPTS_VALUE), it's impossible to determine a correct value in
utils.c.
Decoders can now be marked with FF_CODEC_CAP_SETS_PKT_DTS, in which case
utils.c won't overwrite the field. The decoders are expected to set this
field (even if they only set it to AV_NOPTS_VALUE).
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
This MMAL feature fills in missing timestamps from the framerate set on
the input port. This is generally unwanted, since libavcodec decoders
merely pass through timestamps without ever "fixing" them. The framerate
is also unknown, and even the timebase doesn't have to be set.
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
Don't try to do a blocking wait for MMAL output if we haven't even sent
a single real packet, but only flush packets. Obviously we can't expect
to get anything back.
Additionally, don't send a flush packet to MMAL in the same case. It
appears the MMAL decoder will sometimes hang in mmal_vc_port_disable()
(called from ffmmal_close_decoder()), waiting for a reply from the GPU
which never arrives. Either MMAL disallows sending flush packets without
preceding real data, or it's a MMAL bug.
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
I can't come up with a nice way to handle this. It's hard to keep the
lock-stepped input/output in this case. You can't predict whether the
MMAL decoder will output a picture (because it's asynchronous), so
you have to assume in general that any packet could produce 0 or 1
frames. You can't continue to write input packets to the decoder,
because then you might get too many output frames, which you can't
get rid of because the lavc decoding API does not allow the decoder
to return an output frame without consuming an input frame (except
when flushing).
The ideal fix is a M:N decoding API (preferably asynchronous), which
would make this code potentially much cleaner. For now, this hack
will do.
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
* commit 'c0a49077ea4ff3a0ad30b9e33f1bb06ba9112aaa':
asfdec: add more checks for size left in asf packet buffer
Merged-by: Hendrik Leppkes <h.leppkes@gmail.com>
Allow writing an empty channel mask into the wave format header. Useful
if the input file contains an unknown channel layout.
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
The recent commits change the value slightly. Even though it's
within the threshold it's better to risk as little as possible
especially when different systems, processors, FPUs and compilers
are involved.
Signed-off-by: Rostislav Pehlivanov <atomnuker@gmail.com>
Since TNS was fixed with the recent commits retweak the values
so it's more frequently used.
Still not enabled by default yet, though it's possible that it
will be made enabled by default in the near future.
Signed-off-by: Rostislav Pehlivanov <atomnuker@gmail.com>
This commit was made possible with the earlier commits since the
new quantization method basically means we're working always with
unsigned values. The specifications mention to use compression when
the first 2 bits are identical but they didn't mention if this should
happen before or after the conversion to signed values. Actually
they said nothing about conversion to signed values.
With this commit, coefficient compression usually always happens
which saves a lot of space, especially at extremely low bitrates
and doesn't change the quality at all.
Signed-off-by: Rostislav Pehlivanov <atomnuker@gmail.com>
This finally (and again) gets rid of basically everything the
specifications say about how TNS should be done. The main
problem used to be that a single filter was used for all
coefficients which despite being explicitly recommended by
the specifications usually sounds wrong, therefore it's
a corner case in the current TNS implementation.
This commit also changes the coefficient bit size, as apparently
it's better to use lower precision in case the windows are eight
short. This is apparently what fdk_aac uses, looking at the bit
stream and makes sense. Also the order when 8 SHORT windows happen
is important as 7 was too much and according to PSNR was worse
while 5 is just about correct.
Signed-off-by: Rostislav Pehlivanov <atomnuker@gmail.com>
* commit 'b84675d63aaede8f6944b901250a10456c5477e6':
mmaldec: hack against buffering problems on broken input
Merged-by: Hendrik Leppkes <h.leppkes@gmail.com>
* commit '5788623d29c3e806a7879210986110aced758dc2':
jpeg2000: Split codeblock decoding from the main tile decoding
Merged-by: Hendrik Leppkes <h.leppkes@gmail.com>
* commit 'db53a2306f62f05faa67e6f3c60ee55a9b8e4776':
jpeg2000: Do not warn about known and skippable markers
Merged-by: Hendrik Leppkes <h.leppkes@gmail.com>
* commit '9b5a4a9cce3042558e107ae1ed30d9bf3d867a35':
mmvideo: Make sure the rle does not write over the frame boundaries
Merged-by: Hendrik Leppkes <h.leppkes@gmail.com>
* commit '41ed749fe987e60b0485fa721ad869590651324d':
ogg: Do not try to use the parser if it is not present
Merged-by: Hendrik Leppkes <h.leppkes@gmail.com>
Not requiring this can end up producing hilariously broken files
together with -c:s copy (e.g. a webvtt file containing binary subtitle data).
Signed-off-by: Simon Thelen <ffmpeg-dev@c-14.de>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Should fix compilation with mingw-w64 trunk, where ID3D11VideoDecoder is available
but ID3D11VideoContext still isn't.
Signed-off-by: James Almer <jamrial@gmail.com>
If we try to listen on TCP port and ff_listen() fails on
interrupt callback socket (bind) descriptor overwrites and
does not closed at all.
As a result, we can't rebind to the same port.
Reviewed-by: Stephan Holljes <klaxa1337@googlemail.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Makes more sense as users usually set the -cutoff option
to low pass filter the signal. The encoder will still over
shoot slightly when encoding normal coefficients however
that's normal.
Signed-off-by: Rostislav Pehlivanov <atomnuker@gmail.com>
Most functions are valid over a domain and range of [0.0-1.0] but
some are defined over greater. This patch does not deal with
AVColorRange and assumes AVCOL_RANGE_JPEG for the returned values.
Signed-off-by: Kevin Wheatley <kevin.j.wheatley@gmail.com>
Also disable the mmx/iwht optimization when the bitexact flag is set.
With synthetically coded coefficients (i.e. these that lead to a
residual well outside the [-255,255] range), our optimizations will
overflow. It doesn't make sense to fix the overflows, since they can
only occur on synthetic input, not on real fwht-generated input. Thus,
add a bitexact flag that disables this optimization.
File libopenh264enc.c has been modified so that the encoder uses av_log()
to log messages (error, warning, info, etc.) instead of logging them
directly to stderr. At the time the encoder is created, the current
ffmpeg log level is mapped to an equivalent libopenh264 log level. This
log level, and a message logging function that invokes av_log() to
actually log messages, are then set on the encoder.
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Ensure that the components are ordered consistently, ie. always
RGB(A) and YUV(A). This allows to identify a specific plane on a given
pixel format without hard-coding knowledge of the plane order.
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
Fixes linking in FFMS and f265 at least, when ffmpeg is compiled with
libsoxr.
Signed-off-by: Ricardo Constantino <wiiaboo@gmail.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
This commit changes a few things about the noise substitution
logic:
- Brings back the quantization factor (reduced to 3) during
scalefactor index calculations.
- Rejects any zeroed bands. They should be inaudiable and it's
a waste transmitting the scalefactor indices for these.
- Uses swb_offsets instead of incrementing a 'start' with every
window group size.
- Rejects all PNS during short windows.
Overall improves quality. There was a plan to use the lfg system
to create the random numbers instead of using whatever the decoder
uses but for now this works fine. Entropy is far from important here.
Signed-off-by: Rostislav Pehlivanov <atomnuker@gmail.com>
* commit '2268db2cd052674fde55c7d48b7a5098ce89b4ba':
lavu: Drop the {minus,plus}1 suffix from AVComponentDescriptor fields
Merged-by: Hendrik Leppkes <h.leppkes@gmail.com>
* commit '6b3ef7f080293956b2e5212b83135c6b051212e9':
lavu: Remove bit packing from AVComponentDescriptor
Merged-by: Hendrik Leppkes <h.leppkes@gmail.com>
* commit 'b8b5d8274471129f122858bc74ad09284dae6ab7':
lavu: extend size of the AVPixFmtDescriptor.flags field
Merged-by: Hendrik Leppkes <h.leppkes@gmail.com>
* commit '77cf23668991bfd1fb69339f13e1511b4186b7b3':
asfdec: alloc enough space for storing name in asf_read_metadata_obj
Merged-by: Hendrik Leppkes <h.leppkes@gmail.com>
* commit '5a19bce2ff2b61602889392bec747ce81d1e9a1b':
huffman: use a named identifer for the bits constant
Merged-by: Hendrik Leppkes <h.leppkes@gmail.com>
They allow reconnecting endless live streams which fail with eof
Reviewed-by: Zhang Rui <bbcallen@gmail.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
This patch introduces color warning messages (yellow).
They are enabled whenever available.
Tested with zsh, bash, and sh (bash under --posix).
Signed-off-by: Ganesh Ajjanagadde <gajjanagadde@gmail.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
* commit 'e05f7ed5436207f4a55f1978b223c7f8bc82af42':
file: properly forward errors from file_read() and file_write()
Merged-by: Hendrik Leppkes <h.leppkes@gmail.com>
There is no practical benefit in having this structure elements
bit packed given the size of the structure and its usage.
Change types from uint16_t (packed) to plain int in order to simplify
modifying the structure and accessing its fields.
Signed-off-by: Vittorio Giovara <vittorio.giovara@gmail.com>
The previous restriction was partially designed to fix certain
(broken) samples from bug 215. There should be no restriction on the
number of keyframes per fragment or trun.
The spec suggests that all frames lacking MOV_FRAG_SAMPLE_FLAG_IS_NON_SYNC
are key frames, but we require the flag MOV_FRAG_SAMPLE_FLAG_DEPENDS_YES
to be unset as well. This works for (possibly broken) media that never
sets the NON_SYNC flag and should also be correct for any spec-compliant
file.
For files that never set either of the flags, all samples are marked
as keyframes.
Signed-off-by: Martin Storsjö <martin@martin.st>
Do not make many assumption on the dimension of the slices and just
try to decode additional lines if there is enough data left.
Decodes all the samples kindly provided by ultramage.
This commit once again improves the PNS implementation by scaling the
thresholds with frequency. The thresholds get looser as the frequency
increases since higher frequencies are basically noise to human ears.
Also, this introduces quantization error correction for PNS. Should
the error be too much, no PNS will be used. The energy_ratio is used
to regulate the actual encoded PNS energy: if the generated PNS
energy is higher than the energy from the psy system, energy_ratio
is used to correct it so that hopefully once requantized and
transmitted the value in the decoder will be closer to what the
encoder has.
Signed-off-by: Rostislav Pehlivanov <atomnuker@gmail.com>
Allows avformat_query_codec to be used to check for valid image2 encoders.
Reuses the existing ff_guess_image2_codec ID table.
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
This was an oversight when the IS system was being first implemented.
The ener01 part was largely a result of trial and error and the fact
that the sum of coef0 and coef1 could result in a zero was
overlooked. Once ener01 turns to zero it's used to divide the left
channel energy which doesn't turn out so well as it fills IS[]
with -nan's and inf's which in turn confused the quantize_band_cost.
Signed-off-by: Rostislav Pehlivanov <atomnuker@gmail.com>
This commit rewrites the PNS implementation and significantly
improves sonic quality.
The previous implementation marked an incredibly big amount
of SFBs to predict when there was no need for this and this
resulted in quite a large amount of artifacts. Also the
quantization was incorrect (av_clip(4+log2f(...))) which
led to 3x the intensity for PNS values leading to even more
artifacts.
This commit rewrites the PNS search function and introduces
a major change: the PNS values are synthesized and are compared
to the current coefficients in addition to passing through
the revised checks to see whether PNS can be used.
This decreases distortions and makes the current PNS implementation
mainly focused on replacing any low-power non-zero bands as well
as adding any zeroed bands back.
The current encoder's performance is enough (especially with
IS) so PNS isn't really required except to fill in the occasional
few bands as well as extend any zeroed high frequency, so this
combination which is already enabled by default works
to get as much quality as it can within the bits allowed.
Signed-off-by: Rostislav Pehlivanov <atomnuker@gmail.com>
Since PNS generates coefficients it doesn't make sense to send
the predicted ones as well. Also the specifications explicitly
state to disable right channel IS predictors.
Signed-off-by: Rostislav Pehlivanov <atomnuker@gmail.com>
It's better to trust that the coefficients generated will be
closer than the coefficients derived, and the new PNS implementation
makes sure that this happens.
Signed-off-by: Rostislav Pehlivanov <atomnuker@gmail.com>
The specifications explicitly state to use roundf() which
also rounds half-integer values away from zero.
This does fix a few IS artifacts.
Signed-off-by: Rostislav Pehlivanov <atomnuker@gmail.com>
FATE refs changed to accomodate for the new default behavior of the function.
Numbers are now interpreted as a channel layout, instead of a number of channels.
When AVFMT_FLAG_FAST_SEEK is specified, make MP3 seek operation as
fast as possible.
When no "-usetoc" is specified, the default operation is using TOC
if available; otherwise, uses linear interpolation. This is useful
when seeking a large MP3 file with no TOC available. One example is
Podcast, many MP3 files are large, but no CBR/VBR tags. Most of
them are actually CBR. Even in VBR cases, this option sacrifices the
accuracy of playback time in exchange for responsiveness.
* commit '4e649debcf7f71d35c6b38cdb7ee715eba95d64a':
Postpone API-incompatible changes until the next bump
Merged-by: Hendrik Leppkes <h.leppkes@gmail.com>
* commit '2f9b652e8c646eabef74a6742f0d7d4c9118fd0e':
lavu: Drop deprecated context size variables
These variables had been previously un-deprecated in ffmpeg, not removed.
Merged-by: Hendrik Leppkes <h.leppkes@gmail.com>
* commit '2f8cbbc962dfc0dc1dd0a90b2cd6c21266380f51':
lavu: Drop deprecated external access to AVPixFmtDescriptor table
Merged-by: Hendrik Leppkes <h.leppkes@gmail.com>
* commit '183db02a51a422568084b113a7571c845ca68622':
lavu: Drop deprecated old_pix_fmt.h and related code
Merged-by: Hendrik Leppkes <h.leppkes@gmail.com>
* commit '069713aa4b137781e270768d803b1f7456daa724':
lavc: Drop deprecated thread opaque and codec pkt
Merged-by: Hendrik Leppkes <h.leppkes@gmail.com>
* commit '9f90b24877016e7140b9b14e4b1acee663bb6d8a':
lavc: Drop deprecated get_buffer related functions
Merged-by: Hendrik Leppkes <h.leppkes@gmail.com>
* commit '01bcc2d5c23fa757d163530abb396fd02f1be7c8':
lavc: Drop deprecated destruct_packet related functions
Merged-by: Hendrik Leppkes <h.leppkes@gmail.com>
* commit 'dc70c19476e76f1118df73b5d97cc76f0e5f6f6c':
lavc: Drop deprecated request_channels related functions
Merged-by: Hendrik Leppkes <h.leppkes@gmail.com>
* commit '11b2eed43e91b35b8295ed47115cae2e29bd687d':
lavr: Drop deprecated context reinitialization if resampling was not enabled
Merged-by: Hendrik Leppkes <h.leppkes@gmail.com>
This commit improves the TNS implementation to the point where it's
actually usable and very rarely results in nastyness (in all bitrates
except extremely low bitrates it's increasing the quality and prevents
some distortions from the coder being audiable).
Also adds a double filter support which is only used if the energy
difference between the top and bottom of the SFBs is above the
thresholds defined in the header file. Looking at the bitstream
that fdk_aac generates it sometimes used a double filter despite
the specs stating that a single filter should be enough for almost
all cases and purposes.
Unlike FAAC or fdk_aac we sometimes use a reverse filter in case
the energy difference isn't enought to use a double filter. This
actually works better.
Signed-off-by: Rostislav Pehlivanov <atomnuker@gmail.com>
This commit adds a flag to use the pure coefficients instead
of the processed ones (sce->coeffs). This is needed because
IS will apply the changes to the coefficients immediately
before the adjust_common_prediction function and it doesn't
make sense to measure stereo channel coefficient difference
when one of the channels coefficients are all zero.
Therefore add a flag to use pure coefficients in that case.
TNS is the only thing touching the coefficients before IS
so common window prediction will not take that into account
but the effect of the TNS filter per coefficient can be small
(a few percent) so to some approximation it's fine to just
ignore that.
Also fixed a small error which doesn't alter the results
that much. pow(sqrt(number), 3.0/4.0) == pow(number, 3.0/8.0) !=
pow(number, 3.0/4.0).
Signed-off-by: Rostislav Pehlivanov <atomnuker@gmail.com>
stream copy always has a input stream, it cannot use complex video/audio filters with unambigous input
Fixes CID1322348
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Fixes potential division by zero
Fixes: CID1292295
Reviewed-by: Ganesh Ajjanagadde <gajjanag@mit.edu>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
The assignment had incorrectly placed parentheses which resulted in ret
always being > 0.
Reviewed-by: wm4 <nfxjfg@googlemail.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
This macro avoids the undefined corner case with the *_MIN values
Previous version Reviewed-by: Ganesh Ajjanagadde <gajjanag@mit.edu>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
32bit is not sufficient for all cases
Fixes: signal_sigabrt_7ffff6ac8cc9_686_cov_1897408623_microsoft_new_way_to_shove_mpeg2_in_asf.dvr_ms
Found-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Matches what av_get_colorspace_name() and av_color_space_name() report.
Signed-off-by: Vittorio Giovara <vittorio.giovara@gmail.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
TNS had both IS and PNS switched on when it makes more sense
to have them both off.
Prediction had a redundant argument.
Signed-off-by: Rostislav Pehlivanov <atomnuker@gmail.com>
This commit reorders the coding tools such that they're doing what
the decoder does in reverse order. The very first thing the decoder
does is to decode M/S stereo if that's signalled, then prediction,
IS, and finally TNS and PNS in another function.
adjust_frame_information()'s application of IS and M/S was taken
out into two separate functions since prediction doesn't expect
to get the raw coefficients but rathe the coefficients at that
part of the encoding process.
The results show a much better PSNR when any combination of
Intensity Stereo, Mid/Side stereo and Prediction is used, which
is a sign of an increased encoder efficiency as well as the fact
that the decoder gets what it expects.
Otherwise, with only IS, PNS or prediction there are neither
regressions nor improvements except in the case of IS, which
now by itself (or with PNS) is less prone to artifacts. Enabling
M/S (using stereo_mode) as well will also reduce stereo artifacts
induced by IS, so in the very near future M/S may be enabled
by default.
Signed-off-by: Rostislav Pehlivanov <atomnuker@gmail.com>
This is mostly useful if libass was compiled with a font provider
other than fontconfig, but is still useful in that case.
Signed-off-by: Ricardo Constantino <wiiaboo@gmail.com>
PES header size is 6 bytes (00 00 01 bf XX XX), not 0.
BluRay text subtitles use private stream 2.
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Instead of returning EINVAL, which can cause a stream to fail to load, this
allows the tag to be passed through to the flv demuxer, where it's summarily
ignored.
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
If the selected coder isn't twoloop, this commit temporarily
disables IS and PNS.
The problem is in the encode_window_bands_info() being confused
and setting invalid band_types for non-marked (normal) bands.
Signed-off-by: Rostislav Pehlivanov <atomnuker@gmail.com>
IS and PNS increase quality a ton so as a result the PSNR changed.
Disable the extensions and keep the tests separate such that there
will be no red herrings if one test fails.
Signed-off-by: Rostislav Pehlivanov <atomnuker@gmail.com>
Since the changes made a few week ago (which were done more than a
month ago) the quality and stability of intensity stereo has been
notably good. There were some requests and wishes to have in on by
default and therefore it has been enabled. Should any regressions
arise changes will be made to preferably keep it operating rather
than just disabling it by default again.
Signed-off-by: Rostislav Pehlivanov <atomnuker@gmail.com>
It has been in the current encoder in its current implementation
for quite some time now, so enable it by default. Will increase
quality at all bitrates, especially at low ones.
Signed-off-by: Rostislav Pehlivanov <atomnuker@gmail.com>
Purely a cosmetic change, most of the zeroing of encoder resources
should happen at the top of the main loop.
Signed-off-by: Rostislav Pehlivanov <atomnuker@gmail.com>
This commit reworks the TNS implementation to a hybrid between what
the specifications say, what the decoder does and what's the best
thing to do.
The filter application function was copied from the decoder and
modified such that it applies the inverse AR filter to the
coefficients. The LPC coefficients themselves are fed into the
same quantization expression that the specifications say should
be used however further processing is not done, instead they're
converted to the form that the decoder expects them to be in
and are sent off to the compute_lpc_coeffs function exactly the
way the decoder does. This function does all conversions and will
return the exact coefficients that the decoder will generate, which
are then applied to the coefficients.
Having the exact same coefficients on both the encoder and decoder
is a must since otherwise the entire sfb's over which the filter
is applied will be attenuated.
Despite this major rework, TNS might not work fine on some audio
types at very low bitrates (e.g. sub 90kbps) as it can attenuate
some coefficients too much. Users are advised to experiment with
TNS at higher bitrates if they wish to use this tool or simply
wait for the implementation to be improved.
Signed-off-by: Rostislav Pehlivanov <atomnuker@gmail.com>
Turns out autocorrelating more than 750 coefficients at once
will cause a segfault, despite there being enough space to
hold an entire frame of samples into the buffer.
Signed-off-by: Rostislav Pehlivanov <atomnuker@gmail.com>
This commit adds a function to get the reflection coefficients on
floating point samples. It's functionally identical to
ff_lpc_calc_ref_coefs() except it works on float samples and will
return the global prediction gain. The Welch window implementation
which is more optimized works only on int32_t samples so a slower
generic expression was used.
Signed-off-by: Rostislav Pehlivanov <atomnuker@gmail.com>
Not needed anymore, it was only used by the AAC TNS
encoder and was replaced with a more suitable function
in the following commit.
Signed-off-by: Rostislav Pehlivanov <atomnuker@gmail.com>
Needed for following commits. Contains the starting sfb for
every samplerate and window type.
Signed-off-by: Rostislav Pehlivanov <atomnuker@gmail.com>
Fixes out of array access
Fixes: 87196d8bbc633629fc9dd851fce73e70/asan_heap-oob_26f6853_862_cov_585961513_sonic3dblast_intro-partial.avi
Found-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Despite '417792' being reported in the binary decoder, the buffer at
encoding time needs to be bigger to avoid running out of space due to
interlace handling.
Signed-off-by: Vittorio Giovara <vittorio.giovara@gmail.com>
Without this fate-filter-join failes with
FF_API_GET_CHANNEL_LAYOUT_COMPAT disabled.
Reviewed-by: Ronald S. Bultje <rsbultje@gmail.com>
Signed-off-by: Andreas Cadhalpun <Andreas.Cadhalpun@googlemail.com>
* commit 'c457bdebe7af643b380aa0f6add3cb4335d218dc':
checkasm: Fix floating point arguments on 64-bit Windows
Merged-by: Hendrik Leppkes <h.leppkes@gmail.com>
* commit 'b1abd2aaf91be249f24cb74db9c205d9e4ca9da6':
vf_scale: Add an option to pass the scaler params
Merged-by: Hendrik Leppkes <h.leppkes@gmail.com>
* commit 'c23999be134bde0a0554261a9043be7dbc01de0c':
avconv_opt: Add an option that lists all supported hwaccels
Merged-by: Hendrik Leppkes <h.leppkes@gmail.com>
This uses a RGB intermediate, a more optimal solution would be to perform the rematrixing
directly in subsampled YUV, this is quite a bit more complicated though
Fixes Ticket4805
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
This was copied from the decoder, but is unneeded for the encoder.
tns_max_bands is unused and set to zero which zeroed out start, end
and size and thus no filter was actually applied.
Signed-off-by: Rostislav Pehlivanov <atomnuker@gmail.com>
Since the coefficients are stepped up to order + 1 it was possible
that it went over TNS_MAX_ORDER. Also just return in case the only
coefficient is less than the threshold.
Signed-off-by: Rostislav Pehlivanov <atomnuker@gmail.com>
The encoder-side filter isn't that important. The PSNR
shouldn't change so the FATE test should still be fine.
Signed-off-by: Rostislav Pehlivanov <atomnuker@gmail.com>
The order should never go above TNS_MAX_ORDER (and thus cause
the context to be reinitialized) but this is just in case.
Also fix a comparison, since the coefficients are zero-indexed.
Signed-off-by: Rostislav Pehlivanov <atomnuker@gmail.com>
It also made no sense to actually make the filter span the entire
window including the first band of the next window.
Signed-off-by: Rostislav Pehlivanov <atomnuker@gmail.com>
Tests fails on some ARM builds but it's close enough so it's okay.
NEON, half-precision floats, rounding errors, who knows.
Signed-off-by: Rostislav Pehlivanov <atomnuker@gmail.com>
This commit introduces a test for AAC-Main prediction
which was just reworked in this series of commits.
Signed-off-by: Rostislav Pehlivanov <atomnuker@gmail.com>
Pulses are already on the way so expect to see the list
gone in the close future.
TNS is already of sufficiently high quality to be enabled
by default (but isn't yet, so you too can help by testing!).
Signed-off-by: Rostislav Pehlivanov <atomnuker@gmail.com>
This commit abandons the way the specifications state to
quantize the coefficients, makes use of the new LPC float
functions and is much better.
The original way of converting non-normalized float samples
to int32_t which out LPC system expects was wrong and it was
wrong to assume the coefficients that are generated are also
valid. It was essentially a full garbage-in, garbage-out
system and it definitely shows when looking at spectrals
and listening. The high frequencies were very overattenuated.
The new LPC function performs the analysis directly.
The specifications state to quantize the coefficients into
four bit index values using an asin() function which of course
had to have ugly ternary operators because the function turns
negative if the coefficients are negative which when encoding
causes invalid bitstream to get generated.
This deviates from this by using the direct TNS tables, which
are fairly small since you only have 4 bits at most for index
values. The LPC values are directly quantized against the tables
and are then used to perform filtering after the requantization,
which simply fetches the array values.
The end result is that TNS works much better now and doesn't
attenuate anything but the actual signal, e.g. TNS removes
quantization errors and does it's job correctly now.
It might be enabled by default soon since it doesn't hurt and
helps reduce nastyness at low bitrates.
Signed-off-by: Rostislav Pehlivanov <atomnuker@gmail.com>
This commit removes the array which was made redundant with
the last commit. The current prediction system gets the
quantization error directly (and without the single-frame delay)
in the search_for_pred function.
Signed-off-by: Rostislav Pehlivanov <atomnuker@gmail.com>
This commit completely alters the algorithm of prediction.
The original commit which introduced prediction was completely
incorrect to even remotely care about what the actual coefficients
contain or whether any options were enabled. Not my actual fault.
This commit treats prediction the way the decoder does and expects
to do: like lossy encryption. Everything related to prediction now
happens at the very end but just before quantization and encoding
of coefficients. On the decoder side, prediction happens before
anything has had a chance to even access the coefficients.
Also the original implementation had problems because it actually
touched the band_type of special bands which already had their
scalefactor indices marked and it's a wonder the asserion wasn't
triggered when transmitting those.
Overall, this now drastically increases audio quality and you should
think about enabling it if you don't plan on playing anything encoded
on really old low power ultra-embedded devices since they might not
support decoding of prediction or AAC-Main. Though the specifications
were written ages ago and as times change so do the FLOPS.
Signed-off-by: Rostislav Pehlivanov <atomnuker@gmail.com>
This was missed when the original commits were done. FF_PROFILE_UNKNOWN
is what's in avctx->profile when no audio profile is specified.
Signed-off-by: Rostislav Pehlivanov <atomnuker@gmail.com>
This commit simply duplicates the functionality of ff_lpc_calc_coefs()
for the case of a Levinson-Durbin LPC with the only difference being
that floating point samples are accepted and the resulting coefficients
are raw and unquantized.
The motivation behind doing this is the fact that the AAC encoder
requires LPC in TNS and LTP and converting non-normalized floating
point coefficients to int32_t using SWR and again back for the LPC
coefficients was very impractical.
The current LPC interfaces were designed for int32_t in mind possibly
because FLAC and ALAC use this type for most internal operations.
The mathematics in case of floats remains of course identical.
Signed-off-by: Rostislav Pehlivanov <atomnuker@gmail.com>
This commit simply moves the TNS tables to a more appropriate
aactab.h since then they can be accessed by both the decoder
and encoder.
The encoder _shouldn't_ normally need the tables since the
specs describe a specific quantization process, but the exact
reason for this can be seen in the TNS commit following.
Signed-off-by: Rostislav Pehlivanov <atomnuker@gmail.com>
At least for vdpau, the hwaccel init code tries to check the video
profile and ensure that there is a matching vdpau profile available.
If it can't find a match, it will fail to initialise.
In the case of wmv3/vc1, I observed initialisation to fail all the
time. It turns out that this is due to the hwaccel being initialised
very early in the codec init, before the profile has been extracted
and set.
Conceptually, it's a simple fix to reorder the init code, but it gets
messy really fast because ff_get_format(), which is what implicitly
trigger hwaccel init, is called multiple times through various shared
init calls from h263, etc. It's incredibly hard to prove to my own
satisfaction that it's safe to move the vc1 specific init code
ahead of this generic code, but all the vc1 fate tests pass, and I've
visually inspected a couple of samples and things seem correct.
Signed-off-by: Philip Langdale <philipl@overt.org>
This prevents breaking existing command lines in case the "ab" default is removed from libavcodec
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
The amv one probably looks suspicious, but since it's an intra-only
codec, I couldn't possibly imagine what it would use the edge for,
and the vsynth fate result doesn't change, so it's probably OK.
The current algorithm is just "try all the combinations, and pick the best".
It's not very fast either, probably due to a lot of copying, but will do for
an initial implementation.
Signed-off-by: Donny Yang <work@kota.moe>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Better message that ffplay is not going to be built by printing out what
will be built.
Based on a patch by Moritz Barsnick.
Signed-off-by: rogerdpack <rogerpack2005@gmail.com>
Reviewed-by: Ganesh Ajjanagadde <gajjanag@mit.edu>
Signed-off-by: Timothy Gu <timothygu99@gmail.com>
Assert on `avctx->codec->encode2` to avoid a SEGFAULT on the subsequent
function call.
avcodec_encode_video2() uses a similar assertion.
Calling the wrong function on a stream is a serious inconsistency
which could at other places be potentially dangerous and exploitable,
it is thus safer to stop execution and not continue with such
inconsistency after returning an error.
Commit-message-extended-by commiter
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
The wiki, Ticket1464, and Ticket3970 warn about the usage of GCC 4.2.
This fixes Ticket3970.
Signed-off-by: Ganesh Ajjanagadde <gajjanagadde@gmail.com>
* commit '413d4e54a9bffe2d0afdc6d8a80f516e5df6a421':
nvenc: Properly free the fifos
Not merged, ffmpeg's nvenc doesn't use these fifos.
Merged-by: Hendrik Leppkes <h.leppkes@gmail.com>
* commit '2157df425bd909854fd4afcec4aa3311d8a3b31b':
hlsenc: Support outputting specific versions
Not merged, the version is auto-selected in ffmpeg based on enabled features.
Merged-by: Hendrik Leppkes <h.leppkes@gmail.com>
grep is not necessary for the functionality.
This avoids an unnecessary fork.
Signed-off-by: Ganesh Ajjanagadde <gajjanagadde@gmail.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
And update the preference for the newer codecs now that the libraries
seem stable and widespread enough.
Bug-Id: 695
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
This demuxer was broken on a large number of platforms due to usage of wrong
format specifier in sscanf. This patch fixes the problem, and also adds some
debug logging to reduce future debugging pain.
grep is not required for the functionality in this instance.
This avoids an unnecessary fork, and also avoids a duplicated dumpversion call.
Furthermore, it also corrects behavior when no minor version number is present, see e.g
https://github.com/joyent/node/pull/25671.
Signed-off-by: Ganesh Ajjanagadde <gajjanagadde@gmail.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Use a comment to list the reused tables, since it's more flexible than a
table name to keep information like this. The list will expand in later
commits.
* commit '167ea1fbf15ecefa30729f9b8d091ed431bf43bd':
xavs: Do not try to set the bitrate tolerance without a bitrate
Merged-by: Hendrik Leppkes <h.leppkes@gmail.com>
* commit 'f9ab4fe1f7c1e9d410ca5ee2c9ff8d2892aad068':
h264: Discard currently unsupported registered sei
Merged-by: Hendrik Leppkes <h.leppkes@gmail.com>
* commit '47b447aaff1bc30ba986ca757346a2c5c95b786a':
imgutils: Fix a typo in avcodec_get_pix_fmt_loss
Not merged, this code was refactored and moved to avutil.
Merged-by: Hendrik Leppkes <h.leppkes@gmail.com>
* commit 'd8ebb6157d12183ed3fc987cd2ba18b404758828':
hevcdsp: fix a function name
Not merged, ffmpeg has no function of this name anymore.
Merged-by: Hendrik Leppkes <h.leppkes@gmail.com>
* commit 'e13da244f41610ee073b2f72bcf62b60fa402bb5':
checkasm: x86: properly save rdx/edx in checked_call()
Merged-by: Hendrik Leppkes <h.leppkes@gmail.com>
Works only for flv, h263 and huffyuv decoders.
Makes only one pass through the file (this should be changed to two passes)
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Otherwise it is impossible to make '-movflags +rtphint' bitexact after
FF_API_LAVF_BITEXACT has been disabled.
Reviewed-by: Ronald S. Bultje <rsbultje@gmail.com>
Signed-off-by: Andreas Cadhalpun <Andreas.Cadhalpun@googlemail.com>
Including libavutil/internal.h breaks compilation of doc/print_options.c
with MSVC due to linking avpriv_strtod/avpriv_snprintf.
This reverts part of commit 095347f.
Reviewed-by: Michael Niedermayer <michael@niedermayer.cc>
Signed-off-by: Andreas Cadhalpun <Andreas.Cadhalpun@googlemail.com>
This fixes a -Wabsolute-value reported by clang 3.5+ complaining about misuse of fabs() for integer absolute value.
An additional benefit is the removal of floating point calculations.
Signed-off-by: Ganesh Ajjanagadde <gajjanagadde@gmail.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
FAIL(ret) expands to statements including a silly ret=ret.
This triggers a -Wself-assign on confirmed clang 3.6, and so we fix it.
Signed-off-by: Ganesh Ajjanagadde <gajjanagadde@gmail.com>
Reviewed-by: Nicolas George <george@nsup.org>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Fixes -Wunused-function warnings when compiling with --disable-yasm on x86.
Signed-off-by: Ganesh Ajjanagadde <gajjanagadde@gmail.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
This commit removes the last thing a Windows environment can
complain about the AAC encoder code. Leftover from an old revision.
Signed-off-by: Rostislav Pehlivanov <atomnuker@gmail.com>
Thanks to @nevcairiel for pointing this one out.
Another thing which stopped msvc from compiling.
Signed-off-by: Rostislav Pehlivanov <atomnuker@gmail.com>
When the encoder is ran without specifying -profile:a
the default avctx->profile value is -99 (FF_PROFILE_UKNOWN),
which used to be treated as AAC-LC.
Signed-off-by: Rostislav Pehlivanov <atomnuker@gmail.com>
Hotfix to deal with msvc. Sane compilers lack POSIX ffs().
It only saves a single bit or so and isn't worth it that much.
Signed-off-by: Rostislav Pehlivanov <atomnuker@gmail.com>
This commit finalizes AAC-Main profile encoding support
by implementing all mandatory and optional tools available
in the specifications and current decoders.
The AAC-Main profile reqires that prediction support be
present (although decoders don't require it to be enabled)
for an encoder to be deemed capable of AAC-Main encoding,
as well as TNS, PNS and IS, all of which were implemented
with previous commits or earlier of this year.
Users are encouraged to test the new functionality using either
-profile:a aac_main or -aac_pred 1, the former of which will enable
the prediction option by default and the latter will change the
profile to AAC-Main. No other options shall be changed by enabling
either, it's currently up to the users to decide what's best.
The current implementation works best using M/S and/or IS,
so users are also welcome to enable both options and any
other options (TNS, PNS) for maximum quality.
Signed-off-by: Rostislav Pehlivanov <atomnuker@gmail.com>
This commit implements temporal noise shaping support in the
encoder, along with an -aac_tns option to toggle it on or off
(off by default for now). TNS will increase audio quality
and reduce quantization noise by applying a multitap FIR filter
across allowed coefficients and transmit side information to the
decoder so it could create an inverse filter.
Users are encouraged to test the new functionality by enabling
-aac_tns 1 during encoding.
No major bugs are observable at this time so after a while if no
new problems appear and if the current implementation is deemed
of high enough quality and stability it will be enabled by default,
possibly at the same time the encoder has its experimental flag
removed and becomes the standard aac encoder in ffmpeg.
Signed-off-by: Rostislav Pehlivanov <atomnuker@gmail.com>
This commit permits for the use of the Main profile
in encoding. The functionality of that profile will
be added in the commits following. By itself, this
commit does not alter anything.
Signed-off-by: Rostislav Pehlivanov <atomnuker@gmail.com>
This commit moves the intensity stereo implementation
out from aaccoder and into a separate file. This was
possible using the previous commits.
This commit also drastically improves the IS implementation
by making it phase invariant e.g. it will always choose the
best possible phase regardless of whether M/S coding is on
or most of the coefficients have identical phases.
This also increases the quality and reduces any distortions
introduced by enablind intensity stereo.
Users are encouraged to test it out using the -aac_is 1
parameter as it has always been.
Signed-off-by: Rostislav Pehlivanov <atomnuker@gmail.com>
This commit updates the function definitions in the aaccoder_mips.c
file. This was broken around a month or so ago with the addition
of the rounding argument.
The previous commit in this series also introduced a separate array
to put the quantization error in, this also needed to be updated,
albeit non-functional, in the MIPS optimized aaccoder file.
Credits for the rounding goes to Claudio Freire.
Signed-off-by: Rostislav Pehlivanov <atomnuker@gmail.com>
This commit moves the quantizer to a separate header file.
This allows the quantizer to be used from a separate files outside
of aaccoder without having to put another function pointer and will
result in a slight speedup as the compiler can do more optimizations.
This is required for commits following.
Signed-off-by: Rostislav Pehlivanov <atomnuker@gmail.com>
This commit only creates and initializes an LTP
context which is needed for upcoming commits (TNS).
Signed-off-by: Rostislav Pehlivanov <atomnuker@gmail.com>
This commit simply populates the table pointer which is needed
for upcoming commits (TNS, prediction, etc.). Copied from
the decoder.
Signed-off-by: Rostislav Pehlivanov <atomnuker@gmail.com>
This commit moves the resetting of special bands (above RESERVED_BT)
to the main frame encoding function rather than the way it was done
previously in their corresponding search_for_... functions.
The reason why special bands need to be reset is that while normal
bands get chosen for every frame by the coder (twoloop by default)
the coders do not touch any special sfbs and will therefore
make them persist throughout the file.
If we zero them out any bands left unmarked will be chosen by
the second part of the coder (the trellis function in aaccoder.c).
Signed-off-by: Rostislav Pehlivanov <atomnuker@gmail.com>
This commit only changes the coding style to a saner way
of accessing coefficients (makes more sense to get the
memory address of a coefficients and start from there
rather than adding arbitrary numbers to offset a pointer).
Some compilers might detect an out of bounds access easier.
Also the way M/S and IS coefficients are calculated has been
changed, but should still have the same result (with the exception
that IS now applies from the normal coefficients rather than the
pristine ones, this is needed for upcoming commits).
Signed-off-by: Rostislav Pehlivanov <atomnuker@gmail.com>
Fixes a -Wunused-variable while compiling with --disable-yasm on x86
Signed-off-by: Ganesh Ajjanagadde <gajjanagadde@gmail.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Comment was previously slightly incorrect.
Also, it was placed in the wrong location.
Signed-off-by: Ganesh Ajjanagadde <gajjanagadde@gmail.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
The null muxer has AVFMT_RAWPICTURE set but can be fed with non-raw material
related to Ticket4778
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Works only with video stream.
First pass without seeking -- counts crcs of a frames and store it in an array.
After that it seeks a lot in different places and checks if crcs of these frames and crcs of frames in array are the same.
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Now we no longer have to rely on function pointers intentionally
declared without specified argument types.
This makes it easier to support functions with floating point parameters
or return values as well as functions returning 64-bit values on 32-bit
architectures. It also avoids having to explicitly cast strides to
ptrdiff_t for example.
Signed-off-by: Anton Khirnov <anton@khirnov.net>
If the return value doesn't fit in a single register rdx/edx can in some
cases be used in addition to rax/eax.
Doesn't affect any of the existing checkasm tests but might be useful later.
Also comment the relevant code a bit better.
Signed-off-by: Anton Khirnov <anton@khirnov.net>
If the return value doesn't fit in a single register rdx/edx can in some
cases be used in addition to rax/eax.
Doesn't affect any of the existing checkasm tests but might be useful later.
Also comment the relevant code a bit better.
Now we no longer have to rely on function pointers intentionally
declared without specified argument types.
This makes it easier to support functions with floating point parameters
or return values as well as functions returning 64-bit values on 32-bit
architectures. It also avoids having to explicitly cast strides to
ptrdiff_t for example.
Invalid buffer ids are defined by VA_INVALID_ID. Use that through out
vaapi_*.c support files now that we have private data initialized and
managed by libavcodec. Previously, the only requirement for the public
vaapi_context struct was to be zero-initialized.
This fixes support for 3rdparty VA drivers that strictly conform to
the API whereby an invalid buffer id is VA_INVALID_ID and the first
valid buffer id can actually be zero.
Signed-off-by: Gwenole Beauchesne <gwenole.beauchesne@intel.com>
Move libavcodec managed objects from the public struct vaapi_context
to a new privately owned FFVAContext. This is done so that to clean up
and streamline the public structure, but also to prepare for new codec
support, thus requiring new internal data to be added in there.
The AVCodecContext.hwaccel_context, that holds the public vaapi_context,
shall no longer be accessed from within vaapi_*.c codec support files.
Signed-off-by: Gwenole Beauchesne <gwenole.beauchesne@intel.com>
Deprecate older VA pixel formats (MOCO, IDCT) as it is now very unlikely
to ever be useful in the future. Only keep plain AV_PIX_FMT_VAAPI format
that is aliased to the older VLD variant.
This is an API change.
Signed-off-by: Gwenole Beauchesne <gwenole.beauchesne@intel.com>
Fixing small leaks that can occur when mkv_write_tracks fails in mkv_write_header
(e.g., if video track has unknown codec). Also changing mkv_write_seekhead to take
the MatroskaMuxContext to avoid having dangling pointers.
Signed-off-by: Neil Birkbeck <neil.birkbeck@gmail.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Currently, when forcing an I frame, via API, or via the ffmpeg cli,
using -force_key_frames, we still let x264 decide what sort of
keyframe to user. In some cases, it is useful to be able to force
an IDR frame, e.g. for cutting streams.
Signed-off-by: Derek Buitenhuis <derek.buitenhuis@gmail.com>
When building SDL with MinGW, it sets -mwindows with the
assumption that the application is a GUI application. If this
is linked without passing -mconsole to configure via
--extra-ldflags, stdout will be silenced from cmd.exe while
running FFmpeg.
The -mwindows flag that causes this behavior is included in the
sdl_libs variable, so append -mconsole there rather than create
an sdl_ldflags case just to insert it (especially if -mconsole
must come *after* -mwindows in order to be effective).
Reviewed-by: Timothy Gu <timothygu99@gmail.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
* commit '317cfaa5e09755ed0b34af512ec687963a67bdbf':
asfdec: prevent the memory leak in the asf_read_metada_obj
Merged-by: Hendrik Leppkes <h.leppkes@gmail.com>
* commit '58c3720a3cc71142b5d48d8ccdc9213f9a66cd33':
fate: Make sure a corner-case for ASF is covered
Adjusted fate ref to match the different timebase of the ffasf demuxer
Merged-by: Hendrik Leppkes <h.leppkes@gmail.com>
* commit '72839fce6457fdb5d51b4a5381ac52914ee66389':
hlsenc: Use AV_TIME_BASE units for all the computations
Not merged, duration/time computation is handled quite differently in ffmpeg's hlsenc
Merged-by: Hendrik Leppkes <h.leppkes@gmail.com>
* commit '7bf9647264308d2df74b2b50669f2d02a7ecc90b':
vp7: bound checking in vp7_decode_frame_header
Only partially merged, see 46f72ea507
Merged-by: Hendrik Leppkes <h.leppkes@gmail.com>
* commit 'f34b152eb7b7e8d2aee57c710a072cf74173fbe1':
libfdk-aacdec: Clean up properly if the init fails
Merged-by: Hendrik Leppkes <h.leppkes@gmail.com>
* commit '87de6ddb7b7674e329d5c96677bd8685bc7f7855':
libfdk-aacdec: Bump the max number of channels to 8
Merged-by: Hendrik Leppkes <h.leppkes@gmail.com>
* commit '26ac22e5e7394346e9d59f800e7d4e91f4518d33':
movenc: Add a new flag for writing global sidx indexes for dash
Conflicts:
libavformat/movenc.c
libavformat/movenc.h
Merged-by: Hendrik Leppkes <h.leppkes@gmail.com>
+ split color conversion from scaling
- disabled gamma correction, until it's refactored too
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
This filter can be used to scale one stream to match another or based on
another, useful to scale subtitles or other things to be overlayed
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
The h264 decoder reports 4.1 as its maximum level, but it will decode
5.1 4K video just fine. In practice, the published level limits in
vdpau do not communicate anything that's actually useful.
also do not return the error code but just break reading
metadata object in the case of the aspect ratio reading failure
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
Previously most of the error paths leaked.
Also add FF_CODEC_CAP_INIT_THREADSAFE while adding caps_internal;
this decoder wrapper doesn't have any static data that is initialized.
Signed-off-by: Martin Storsjö <martin@martin.st>
For ADTS streams, the output format (number of channels, frame size)
can change at any point (with the latest version of fdk-aac, the decoder
seems to change format after a handful of frames, not outputting the
right format immediately, for cases that worked fine with the earlier
version of the lib).
Previously, the decoder decoded straight into the output frame once the
number of channels and frame size was known. This obviously does not
work if the number of channels or frame size changes.
The alternative would be to allocate the AVFrame with the maximum number
of channels and frame size, and change them afterward decoding into it,
but that may cause confusion to users e.g. of the get_buffer callback.
This solution should be more robust.
CC: libav-stable@libav.org
Signed-off-by: Martin Storsjö <martin@martin.st>
In the latest version of fdk-aac, the decoder can output up to 8
channels; take this into account when preallocating buffers that
need to fit the output from any packet.
CC: libav-stable@libav.org
Signed-off-by: Martin Storsjö <martin@martin.st>
Don't try to detect the float ABI by checking at the toolchain
name or by trying to assemble and link files with eabi_attributes.
This fixes the float ABI detection when building using clang
with -fembed-bitcode, where the current eabi_attributes check
accidentally passes.
This issue was pointed out by James Howe <james.howe@hp.com>.
CC: libav-stable@libav.org
Signed-off-by: Martin Storsjö <martin@martin.st>
The value of wrap_flag in the Text Wrap Box specifies if the text is to
be wrapped or not. Uses 'end of line wrap' amongst the wrap styles
supported by ASS if the text is to be wrapped, i.e; fill as much text
in a line as possible, then break to next line.
The 3GPP spec has no provision for smart wrapping.
Signed-off-by: Niklesh <niklesh.lalwani@iitb.ac.in>
The description is yet crappy, it merely copies the description of the
added and undocumented options and their value range. More descriptive
documentation is welcome.
Stream timebase should be set using avpriv_set_pts_info, otherwise
avctx->pkt_timebase is not correct.
This should fix ticket #4766.
Patch is only compile tested.
Signed-off-by: Marton Balint <cus@passwd.hu>
Reviewed-by: Stephen Hutchinson <qyot27@gmail.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
As suggested, posting the combined patch with the fate changes.
The patch sets the default style in ASS from the default style
information present in the movtext header.
Signed-off-by: Niklesh <niklesh.lalwani@iitb.ac.in>
The double meaning of the faststart flag (moving a moov atom
to the start of files, making them streamable, for non-fragmented
files, vs inserting a global sidx index at the start of files
for fragmented files) is confusing - see 40ed1cbf1 for
explanation of its origins.
Since the second meaning of the flag hasn't been part of any
libav release yet, just rename it to get rid of the confusion
without any extra deprecation (which wouldn't get rid of the
potential confusion, of users adding -movflags faststart
even for fragmented files, where it isn't needed for making
them "streamable").
This gets back the old behaviour, where -movflags faststart
doesn't have any effect for fragmented files.
Signed-off-by: Martin Storsjö <martin@martin.st>
* commit 'f5e486f6f8c242bb2be01ad3ae952b5733ba1113':
x86inc: Fix instantiation of YMM registers
See e93d3a22cb
Merged-by: Hendrik Leppkes <h.leppkes@gmail.com>
* commit 'b114d28a18050b5ebd22fc067332e5487243889c':
x86inc: warn when instructions incompatible with current cpuflags are used
See a1684311b3
Merged-by: Hendrik Leppkes <h.leppkes@gmail.com>
* commit '9f1245eb9620a70feaa00ba745c6c7a56a839556':
x86inc: Support arbitrary stack alignments
See 826790f596
Merged-by: Hendrik Leppkes <h.leppkes@gmail.com>
* commit '8c75ba55a4367c854b577c849ea2195bd78c4c81':
x86inc: warn if XOP integer FMA instruction emulation is impossible
See 8db0f71b49
Merged-by: Hendrik Leppkes <h.leppkes@gmail.com>
* commit '8f4a06faf45c1cbcabec610f4b47824171379934':
checkasm: Remove unnecessary include
See 5e8e121fcc
Merged-by: Hendrik Leppkes <h.leppkes@gmail.com>
A parser should never be called with a mismatching codec
Found-by: Ganesh Ajjanagadde <gajjanag@mit.edu>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
FATE is non-interactive; it should not listen to user commands
Signed-off-by: Ganesh Ajjanagadde <gajjanagadde@gmail.com>
This should fix leaving the terminal in a messed up state with
zsh in case of crashes during fate
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Don't try to do a blocking wait for MMAL output if we haven't even sent
a single real packet, but only flush packets. Obviously we can't expect
to get anything back.
Additionally, don't send a flush packet to MMAL in the same case. It
appears the MMAL decoder will sometimes hang in mmal_vc_port_disable()
(called from ffmmal_close_decoder()), waiting for a reply from the GPU
which never arrives. Either MMAL disallows sending flush packets without
preceding real data, or it's a MMAL bug.
I can't come up with a nice way to handle this. It's hard to keep the
lock-stepped input/output in this case. You can't predict whether the
MMAL decoder will output a picture (because it's asynchronous), so
you have to assume in general that any packet could produce 0 or 1
frames. You can't continue to write input packets to the decoder,
because then you might get too many output frames, which you can't
get rid of because the lavc decoding API does not allow the decoder
to return an output frame without consuming an input frame (except
when flushing).
The ideal fix is a M:N decoding API (preferably asynchronous), which
would make this code potentially much cleaner. For now, this hack
will do.
The .text section is already 16-byte aligned by default on all supported
platforms so `SECTION_TEXT` isn't any different from `SECTION .text`.
Signed-off-by: Anton Khirnov <anton@khirnov.net>
Change ALLOC_STACK to always align the stack before allocating stack space for
consistency. Previously alignment would occur either before or after allocating
stack space depending on whether manual alignment was required or not.
Signed-off-by: Anton Khirnov <anton@khirnov.net>
Emulation requires a temporary register if arguments 1 and 4 are the same; this
doesn't obey the semantics of the original instruction, so we can't emulate
that in x86inc.
Also add pmacsdql emulation.
Signed-off-by: Henrik Gramner <henrik@gramner.com>
Signed-off-by: Anton Khirnov <anton@khirnov.net>
As well as tables littered everywhere, functions were spread
out all across the encoder's files. This moves them to a single
place where they can be used by either the encoder's main files
or additional encoder files. Additionally, it changes the type
of some to 'inline' to enable us to simply put them in a header
file and possibly gain some speed due to compiler optimizations.
Signed-off-by: Claudio Freire <klaussfreire@gmail.com>
* commit '5f200bbf98efe50f63d0515b115d2ba8dae297bc':
movenc: Place the sidx index after the initial moov/mdat pair
Merged-by: Hendrik Leppkes <h.leppkes@gmail.com>
* commit '8e34089e265a6b01e1e3301e8864439d26793753':
movenc: Check that frag_info entries exist in mov_write_sidx_tag
Merged-by: Hendrik Leppkes <h.leppkes@gmail.com>
* commit '1542ec96389f32e5081c6c607e4b6f5e257ccdf2':
cosmetics: Drop spurious spaces from if clauses
Conflicts:
libavcodec/vc1_block.c
Merged-by: Hendrik Leppkes <h.leppkes@gmail.com>
* commit '0f562f5b833d603e04123d198c59f8b2b5eb43e4':
h264: Do not print an error when the buffer has to be refilled
Conflicts:
libavcodec/h264.c
Merged-by: Hendrik Leppkes <h.leppkes@gmail.com>
For fragmented files with non-empty moov, with a fragment index
(sidx), place the index after the initial moov/mdat pair.
Previously, for this pathological case, the index was written
at the start of the file.
Signed-off-by: Martin Storsjö <martin@martin.st>
The same field is also used for writing the sidx index header,
for fragmented files, when the faststart flag is used.
Signed-off-by: Martin Storsjö <martin@martin.st>
This fixes crashes with pathological cases when trying to write
a sidx index (via the -movflags faststart option, in combination
with fragmenting options), when no fragments actually have been
written. (This is possible if the empty_moov flag isn't used,
so that all actual packet data is written in the moov/mdat pair,
and no moof/mdat pairs have been written.)
In these pathological cases, no sidx should be written at all.
Signed-off-by: Martin Storsjö <martin@martin.st>
The commit broke sub-movtext and sub-subripenc
fate output differs between mips ad x86 so updating fate ref is not
possible
This reverts commit d670848d4c.
FFplay was using a 5 frame packet buffer, this is not much (e.g. 200 ms for
25fps video), when HLS is requesting a new segment via HTTP, it may take longer
for the request to complete.
Should fix ticket #4720.
Reviewed-by: Michael Niedermayer <michael@niedermayer.cc>
Signed-off-by: Marton Balint <cus@passwd.hu>
Previously the code just appended the strings of flags which
worked with "+bitexact" but would not work with something like "0"
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
This simplifies allocating and initializing swscale contexts with custom options.
The function is internal currently but could be moved into the public header
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Fixes compilation with --disable-everything --enable-encoder=mjpeg
While there, clean up some recursive dependencies.
Reported-by: Bernhard Döbler, programmer bardware de
* commit '9469370fb32679352e66826daf77bdd2e6f067b5':
h264: Use AVERROR return codes instead of -1
Only partially merged, as the first hunk is not correct and would result
in endless log spam.
Merged-by: Hendrik Leppkes <h.leppkes@gmail.com>
This commit moves any tables specific to the encoder from aacenc
and aaccoder to a separate file called 'aacenctab.c/.h'.
This was done as a clean up attempt as the encoder was filled with
tables pasted in between functions which made it confusing to follow
and track where each table and definition had been used.
This commit solves this by simply exporting the smaller tables out to
the aacenctab.h while the larger ones are compiled using aacenctab.c
and are referenced from the header file.
Signed-off-by: Claudio Freire <klaussfreire@gmail.com>
At least the new videotoolbox decoder does not actually set a frame if
end_frame fails. This causes the API to return success and signals that
a picture was decoded, even though AVFrame->data[0] is NULL.
Fix this by propagating end_frame errors.
Compute individual stream durations in matroska muxer.
Write them as string tags in the same format as mkvmerge tool does.
Signed-off-by: Sasi Inguva <isasi@google.com>
The windows SDL audio driver plays the old data in the buffer in a loop if it
is not updated in time. So instead of waiting for data and blocking the the
audio thread, return silence if no data is available.
Should fix ticket #2289.
Reviewed-by: Michael Niedermayer <michael@niedermayer.cc>
Signed-off-by: Marton Balint <cus@passwd.hu>
* commit '98c9ade9853a9c413534ef243174d65f3f7506fa':
drawtext: Move the strftime expansion in a separate function
Not merged, the code does not exist anymore.
Merged-by: Hendrik Leppkes <h.leppkes@gmail.com>
The length of BOOL values is 16 bits in the Metadata Object but
32 bits in the Extended Content Description Object.
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
Change ALLOC_STACK to always align the stack before allocating stack space for
consistency. Previously alignment would occur either before or after allocating
stack space depending on whether manual alignment was required or not.
The FILE struct is opaque in MSVC 2015, and the members of this struct
were never meant to be accessed in any case.
No conditions are known where this check was needed to get characters
from stdin.
This is the same fix that Hendrik made to dxva2_hevc. It should be
equally required here, although I don't see any visual difference.
Nevertheless, best to stay consistent.
The latest nvidia 355.06 drivers fixes the interleaving bug when
video surfaces are rendered. It still seems to be broken for
read-back with getBits but that's sufficiently uninteresting that
I don't think we need to wait for it to remove the flag.
According to S377M, segmented frame layout is identical to separate
field layout except that the two fields are taken from a single scan
of the incoming image, ie: they are coincident in time. Thus the
resulting frame is progressive.
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
On Xcode's clang on OS X, $cc --version will output a 'Configured with:'
line to stderr, which clobbers the configure script output. As this line
serves no further purpose, it should be silenced.
The same applies to apple-gcc 4.2.1, which complains that it can not
understand the kernel version it is running on.
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
On Xcode's clang on OS X, $cc --version will output a 'Configured with:'
line to stderr, which clobbers the configure script output. As this line
serves no further purpose, it should be silenced.
The same applies to apple-gcc 4.2.1, which complains that it can not
understand the kernel version it is running on.
Reviewed-by: Carl Eugen Hoyos <cehoyos@ag.or.at>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Only two functions that use xop multiply-accumulate instructions where the
first operand is the same as the fourth actually took advantage of the macros.
This further reduces differences with x264's x86inc.
Reviewed-by: Ronald S. Bultje <rsbultje@gmail.com>
Signed-off-by: James Almer <jamrial@gmail.com>
I do not think having "git push" as example is a good idea.
The command has a very high chance of pushing things which are unwanted to be
pushed
Reviewed-by: Carl Eugen Hoyos <cehoyos@ag.or.at>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
ucNumDeltaPocsOfRefRpsIdx needs to contain the flat value from the SPS RPS,
and not the final computed value from the slice header RPS, as this calculation
is done internally by the driver again.
Sample-Id: http://trailers.divx.com/hevc/Sintel_4k_27qp_24fps_1aud_9subs.mkvi
The bug was fixed in 1.3.0, so only perform the workaround in earlier versions.
Reviewed-by: "Ronald S. Bultje" <rsbultje@gmail.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
* commit 'fdbc544d29176ba69d67dd879df4696f0a19052e':
asfdec: prevent the memory leak while reading metadata
Merged-by: Hendrik Leppkes <h.leppkes@gmail.com>
* commit '979cb55103fa8e8274806e496901203742c686d1':
hevc: Split the sei parsing in 3 functions
Conflicts:
libavcodec/hevc_sei.c
Merged-by: Hendrik Leppkes <h.leppkes@gmail.com>
* commit '043f46f5741e1a5caedf55d788e1a72aae3b7605':
hevc: Use switch instead of if-nests in decode_nal_sei_message
Conflicts:
libavcodec/hevc_sei.c
Merged-by: Hendrik Leppkes <h.leppkes@gmail.com>
* commit '2cd841c0776535be56e4db67485fdd9509c9b9f4':
hevc: Use a proper enum for the SEI values
Conflicts:
libavcodec/hevc_sei.c
Merged-by: Hendrik Leppkes <h.leppkes@gmail.com>
* commit 'cd4d9df22738e6f147521ccb72c7930db6050914':
asfdec: free AVDictionaries properly when closing the demuxer
Merged-by: Hendrik Leppkes <h.leppkes@gmail.com>
There is an SSE2 implementation so the SSE version is never used. The "SSE"
version also happens to contain SSE2 instructions on x86-64.
Signed-off-by: Anton Khirnov <anton@khirnov.net>
Commit 0a551cbe introduced "activation_bytes" option, and not specifying
this option (while calling ffmpeg / ffprobe) causes the program to quit
early. Before this commit, ffprobe was capable of processing metadata in
.aax files.
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
This commit adds a short description to the aac_coder option of the
AAC encoder in order to be consistent with the other options.
Generally, right now, the 'FAAC' method works fine with speech and
low broadband spectrum audio. 'Fast' is just as the name suggests.
'ANMR' still needs work and 'Twoloop', the default, works well with
every type of audio.
Signed-off-by: Rostislav Pehlivanov <atomnuker@gmail.com>
Extract two methods from decode_registered_user_data in order to improve
code readability. Also make the constant holding the allocation size a
64-bit unsigned integer so that the size comparison against INT_MAX makes
sense.
Bug-Id: CID1312090
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
This commit removes a redundant argument from the functions in aaccoder.
The argument lambda was redundant as it was just a copy of s->lambda,
to which all functions have access to anyway. This cleans up the function
pointers a bit which is helpful as there are a lot of other search_for_*
functions under development and with them populated it gets messy.
Reviewed-by: Claudio Freire <klaussfreire@gmail.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
* commit 'a0797950527120c85263c910eb6ba08fddcfdcb3':
fate/mp3: specify the number of output samples instead of filesize
Merged-by: Michael Niedermayer <michael@niedermayer.cc>
Needed for old compilers like GCC 4.2
Tested by trac user brad. Fixes ticket #4745
Reviewed-by: Michael Niedermayer <michael@niedermayer.cc>
Signed-off-by: James Almer <jamrial@gmail.com>
faults in fate otherwise breaks the terminal.
To reproduce, add a abort() into wav_read_header()
run make fate-acodec-adpcm-ima_wav
This reverts commit 92e62f49cf.
* commit '764ec70149728be82304c163ccc4e280f1629201':
rtsp: Only interpret $ as interleaved packet indicator at the start of replies
Merged-by: Michael Niedermayer <michael@niedermayer.cc>
* commit '6877537ff321136cf78ab03b8b91e6b6f218db5b':
hmac: add missing version bump and APIChanges entry
Conflicts:
libavutil/version.h
version.h is not changed as the code has been added 2 years ago in FFmpeg
See: 82ef67016e
Merged-by: Michael Niedermayer <michael@niedermayer.cc>
* commit '0c73a5a53cc97f4291bbe9e1e68226edf6161744':
hls: Save and forward avio options
Conflicts:
libavformat/hls.c
Merged-by: Michael Niedermayer <michael@niedermayer.cc>
* commit '5ae178539b91d25710b7bb322d156c31aea9f8bf':
http: Add the trailing endlines if they are missing
Merged-by: Michael Niedermayer <michael@niedermayer.cc>
Allow $ as character anywhere within normal RTSP replies - both
within the lines, and as the first character of RTSP header lines.
(The existing old comment indicated that an inline packet could
start at any line within a RTSP reply header, but that doesn't
sound valid to me, and I'm not sure if the existing code
handled that correctly either.)
CC: libav-stable@libav.org
Signed-off-by: Martin Storsjö <martin@martin.st>
* commit 'bf0cef5c3a114df452e5476167634dd8f51eb448':
checkasm: Include io.h for isatty, if available
Merged-by: Michael Niedermayer <michael@niedermayer.cc>
configure does check for isatty, and checkasm properly checks
HAVE_ISATTY, but on some platforms (e.g. WinRT), io.h needs to be
included for isatty to be available.
Signed-off-by: Martin Storsjö <martin@martin.st>
The test code is updated with some cosmetics to avoid the loop
using undefined AVHMACType values.
The old enum values will be removed in the next major bump, effectively
making both projects synced and without API or ABI issues.
Reviewed-by: Michael Niedermayer <michael@niedermayer.cc>
Signed-off-by: James Almer <jamrial@gmail.com>
* commit '65dd6a1f84cc5c9a91d279e8e8b72ff7adf58d31':
rtmpproto: use AVHMAC instead of a custom implementation
See: 6c87b86628
Merged-by: Michael Niedermayer <michael@niedermayer.cc>
There can be other headers than "Content-Type:" (in this case, a
"Content-Length:" header was following), so checking for a trailing
newline is wrong.
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Also replace custom tests for MD5 with those published in RFC 2202
Signed-off-by: James Almer <jamrial@gmail.com>
Signed-off-by: Martin Storsjö <martin@martin.st>
2nd channel makes sense only for CPE type.
Skip 2nd channel in preparation for resampler (in spectral_to _sample())
depending on block type.
Fixes fate failure with clang ftrapv.
Signed-off-by: Nedeljko Babic <nedeljko.babic@imgtec.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Fixes some files from Ticket679
This also changes subtitles to 4:2:0 matching the output format and thus
simplifying the blend code.
This restricts placement to the chroma sample resolution though, speak up
if you consider this a problem, say so, the code could be changed to use
YUV444 for subtitles and scaling them down while blending, this would be
slower though.
The current code only uses a single swscale context and reinitializes it
as needed, this could be changed as well if needed
Reviewed-by: Marton Balint <cus@passwd.hu>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
This makes it possible to remove more coded_frame usage without breaking the
publically visible coded_frame
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
* commit 'c6e0829e3696c894d24c8088c3ee30a9c17534c2':
configure: Don't force _WIN32_WINNT to an older version if targeting winphone/winrt
Merged-by: Michael Niedermayer <michael@niedermayer.cc>
* commit 'd75b55635a02444c2f188c26e431a1cec992babe':
dxva2/d3d11va: Set _WIN32_WINNT to 0x0602 instead of 0x0600
Merged-by: Michael Niedermayer <michael@niedermayer.cc>
This commit replaces the 1 microsecond delay by 500 microsecond for the
case when the MFX library does return MFX_WRN_DEVICE_BUSY status.
In general this warning never appears for simple encoding or
transcoding session because the GPU is so fast so it almost always is not busy and
any delay value just does not executes.
But for heavy transcoding tasks for example, when several QSV sessions
are running simultaneously then using a 1-microsecond delay may
result in 1000 iterations per each frame.
So here possible a paradoxical case when GPU loading also loads CPU by dummy tasks.
Official MFX/QSV samples by Intel are using 1 millisecond (i.e. 1000
microseconds) everywhere where MFX_WRN_DEVICE_BUSY does appear.
So 500us is a much more optimal value than 1us.
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
There was fixed number of loops (2048) in preparation for resampler, so
when number of samples is smaller than this, there would be an overflow on
ret_buf.
For some reason this behavior popped out only under valgrind with
--disable-memory-poisoning option.
This is now fixed and number of loops depends on actual number of samples.
Signed-off-by: Nedeljko Babic <nedeljko.babic@rt-rk.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
This avoids having to manually set _WIN32_WINNT in --extra-cflags
when targeting these API families, which only was necessary to
work around configure setting _WIN32_WINNT to an older version
by default.
Signed-off-by: Martin Storsjö <martin@martin.st>
If _WIN32_WINNT is unset, we force it to a new enough value to
make sure the necessary definitions are visible.
When targeting Windows Phone or Windows RT, _WIN32_WINNT should
be at least 0x0602 - otherwise the windows headers themselves
can cause errors (which technically are bugs in the headers).
Raising this value here shouldn't hurt; the alternative would
be to not touch it at all if WINAPI_FAMILY is set to phone/app,
or to force setting it to 0x0602 in configure if unset (for phone/app).
Signed-off-by: Martin Storsjö <martin@martin.st>
In version 10.4 of the DeckLink SDK, GetBufferedAudioSampleFrameCount() was changed to take an unsigned int instead of an unsigned long.
Signed-off-by: Chris Spencer <spencercw@gmail.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
* commit 'b7040e67ec18259ca634a0e29d98469b3484a87c':
h264: fix AVDISCARD_NONKEY for some interlaced content
Conflicts:
libavcodec/h264.c
Not merged, the used field is not initialized where it is used
Merged-by: Michael Niedermayer <michael@niedermayer.cc>
* commit 'b5c1c16247ab7d166c84eaf4564e49a1535fdaaf':
asfdec: do not align Data Object when Broadcast Flag is set
Merged-by: Michael Niedermayer <michael@niedermayer.cc>
* commit 'db21dde3f72c2331653399bdb8745350f015d847':
qsvdec_mpeg2: drop an incorrect comment
Conflicts:
libavcodec/qsvdec_mpeg2.c
No change as the removed comment was not in libavcodec/qsvdec_mpeg2.c
Merged-by: Michael Niedermayer <michael@niedermayer.cc>
* commit '3ee217853a6741b829a2683f49c590618891b1ab':
Support the Hap chunked frame format
Conflicts:
libavcodec/hap.h
libavcodec/hapdec.c
libavcodec/version.h
See: c7e6443441
Merged-by: Michael Niedermayer <michael@niedermayer.cc>
* commit '43dd004747fa697396b47d034a80e069facbea09':
hap: Move some per-stream setup into decoder init rather than per-frame
Conflicts:
libavcodec/hapdec.c
See: 6074956fa1
Merged-by: Michael Niedermayer <michael@niedermayer.cc>
When skip_frame is set to _NONKEY the decoder skips everything except intra
slices, which breaks frames that consist of an intra field together with any
other field type; half the frame becomes garbage. This patch fixes the issue by
letting non-intra slices through if they're part of a keyframe.
Signed-off-by: Anton Khirnov <anton@khirnov.net>
This change will reject frames with a texture type which does not match
the stream description.
Signed-off-by: Vittorio Giovara <vittorio.giovara@gmail.com>
This option is extremely codec specific and only a few codecs employ it.
Move it to codec private options instead: mpegenc family supports only 3
values, xavs and x264 use 5, and xvid has a different metric entirely.
Signed-off-by: Vittorio Giovara <vittorio.giovara@gmail.com>
This macro identifies whether VFPv3 is available; MSVC defaults
to hardfloat (except for older MSVC versions for CE, targeting
ARMv4).
Signed-off-by: Martin Storsjö <martin@martin.st>
* commit 'a67b67944aa9e6e794934d15f9fd9a9cf7173e09':
ac3enc_template: Use the correct context field
See: 320ce9f284
Merged-by: Michael Niedermayer <michael@niedermayer.cc>
it is not optimal when the buffer size is well known at allocation time
This avoids a memcpy()
about 1% faster
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
This parameter can be used to inform the allocation code about how much
downsizing might occur, and can be used to optimize how to allocate the
packet
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Avoid clipping due to quantization noise to produce audible
artifacts, by detecting near-clipping signals and both attenuating
them a little and encoding escape-encoded bands (usually the
loudest) rounding towards zero instead of nearest, which tends to
decrease overall energy and thus clipping.
Currently fate tests measure numerical error so this change makes
tests using asynth (which are near clipping) report higher error
not less, because of window attenuation. Yet, they sound better,
not worse (albeit subtle, other samples aren't subtle at all).
Only measuring psychoacoustically weighted error would make for
a representative test, so that will be left for a future patch.
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Failure should not be possible, if it does occur then the code is
buggy and should be fixed not silently clip
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
* commit '60a21b3d81c1a11cf5a08950eadd4e84ca2e597c':
configure: Check for _M_ARMT to detect thumb when using MSVC
Conflicts:
configure
Merged-by: Michael Niedermayer <michael@niedermayer.cc>
* commit '2192ff84dd720968108bc1ca54e239f4c94eb61d':
configure: Default to armasm for --toolchain=msvc when targeting arm
Merged-by: Michael Niedermayer <michael@niedermayer.cc>
* commit '6d3081e6c374ff7da12b07ed33d1662be1b32dbc':
doc: Remove the now unnecessary remark about PATH and link.exe
Merged-by: Michael Niedermayer <michael@niedermayer.cc>
* commit '9e8627a1ff9207b9e272d248da2e1bd0cc6fe2fe':
asfdec: interpret the first flag in an asf packet as length flag
Merged-by: Michael Niedermayer <michael@niedermayer.cc>
* commit '342b0ba5f93b09b1d0c2597db44605300e6fcc53':
configure: Only redirect strtoll to _strtoi64 if necessary
Conflicts:
configure
Merged-by: Michael Niedermayer <michael@niedermayer.cc>
* commit '5fd553d31272d5ed42a7a5a0ecaab7b3452da83a':
configure: Only redefine inline to __inline for msvc if necessary
Conflicts:
configure
Merged-by: Michael Niedermayer <michael@niedermayer.cc>
* commit '0cff125200ab53fa3ae70d85b4f614f269fe3426':
configure: Only add -FIstdlib.h for msvc/icl if necessary
Conflicts:
configure
Merged-by: Michael Niedermayer <michael@niedermayer.cc>
* commit '9b4b96c0dee90d260891ec765b28f6ca15594340':
force WINAPI_FAMILY to WINAPI_FAMILY_DESKTOP_APP to be able to use dxva.h
Conflicts:
libavcodec/dxva2_internal.h
See: c5327df838
Merged-by: Michael Niedermayer <michael@niedermayer.cc>
The struct definitions in dxva.h, which are necessary in order to
actually use d3d11va, are hidden when WINAPI_FAMILY targets Windows Phone
or WindowsRT.
Building with WINAPI_FAMILY=WINAPI_FAMILY_DESKTOP_APP is disallowed
when targeting ARM. ("Compiling Desktop applications for the ARM
platform is not supported.") So we set _CRT_BUILD_DESKTOP_APP to 0
to tell the runtime not to detect some issues with this mismatching.
The same tweaks to detect if the API is available is done in dxva2_internal.h
when compiling each DXVA2/D3D11VA decoders.
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
This is only necessary on MSVC 2010/2012 (and possibly on some
ICL versions). This both avoids an extra hack on newer MSVC
versions, and better documents what the extra compiler option
is used for.
Signed-off-by: Martin Storsjö <martin@martin.st>
The struct definitions in dxva.h, which are necessary in order to
actually use d3d11va, are hidden when WINAPI_FAMILY targets Windows Phone
or WindowsRT.
Building with WINAPI_FAMILY=WINAPI_FAMILY_DESKTOP_APP is disallowed
when targeting ARM. ("Compiling Desktop applications for the ARM
platform is not supported.") So we set _CRT_BUILD_DESKTOP_APP to 0
to tell the runtime not to detect some issues with this mismatching.
The same tweaks to detect if the API is available is done in dxva2_internal.h
when compiling each DXVA2/D3D11VA decoders.
Signed-off-by: Martin Storsjö <martin@martin.st>
Add support for fontsize in style records. The patch uses reset to
directly change back to default style instead of using closing tags,
since we are not handling the default styles right now.
Signed-off-by: Niklesh <niklesh.lalwani@iitb.ac.in>
This also switches to using a separate AVCodecContext for the inner mjpeg decoder
which is cleaner and avoids fields from being overwritten with wrong values
Fixes Ticket162
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Fixes displaying subtitles before any CLUT has been received
Fixes Ticket153
This will of course not display these initial subtitles in the correct
color (as that is not known at that point) but they should look clean
and not corrupted
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Silences warnings when using -Wshift-overflow (GCC 6+)
Reviewed-by: Michael Niedermayer <michael@niedermayer.cc>
Signed-off-by: James Almer <jamrial@gmail.com>
* commit 'bf52f773913cf74bdf0d2c8c2cb4473fa1b7801e':
lavc: add Intel libmfx-based MPEG2 decoder.
Conflicts:
configure
libavcodec/qsvdec_mpeg2.c
Some cosmetics merged, rest is related to the removed parser code and
thus not merged
Merged-by: Michael Niedermayer <michael@niedermayer.cc>
* commit '96dca089b19bf55293136277f5b081c56146e10e':
qsvdec: move qsv_process_data() from qsvdec_h264 to the common code
Conflicts:
libavcodec/qsvdec.c
libavcodec/qsvdec_h264.c
No change as the parser code has been removed
Merged-by: Michael Niedermayer <michael@niedermayer.cc>
* commit '22522d9c2c69624fe4d81d61ee65a56610f22f1d':
qsvdec: fix a memleak of async_fifo
Conflicts:
libavcodec/qsvdec.c
Merged-by: Michael Niedermayer <michael@niedermayer.cc>
* commit 'aa9d15d89bb4ee8a31607d3db1b8c5334eb88d2d':
qsvdec: avoid an infinite loop with no consumed data and no output
Conflicts:
libavcodec/qsvdec.c
Merged-by: Michael Niedermayer <michael@niedermayer.cc>
This side data does not serve or improve decoding the data, it thus
would semantically be metadata and not side data.
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
This is triggerable with the HEVC decoder. It is unclear yet whether the
bug is in the calling code or the MSDK, but it seems better to check for
this in any case.
Otherwise it would get translated like a library path (-L option),
which breaks setting the flag.
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
* commit 'c9edbe4af901e9bc9f05a62319637f9760df9a4a':
use a wrapper script to call MS link.exe to avoid mixing with /usr/bin/link.exe
See: 58ed7b6328
Merged-by: Michael Niedermayer <michael@niedermayer.cc>
favor link over link.exe in case some wrapper script already exists
fallback to "link" in the path if the one next to cl is not found
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
* commit 'a54e720e0289433d6bc3f7ba0a37fa5cabfaeea9':
configure: force -nologo- when detecting MSVC
Conflicts:
configure
Merged-by: Michael Niedermayer <michael@niedermayer.cc>
* commit '44f7df0c987965763c609f6dc36974b04182e58d':
dds: Write the palette in the native endian form
Conflicts:
libavcodec/dds.c
See: 36a87c2dc7
Merged-by: Michael Niedermayer <michael@niedermayer.cc>
The -nologo- option is the inverse of -nologo, reenabling printing the
"logo" version header. This is useful if the compiler actually is a
wrapper that forces -nologo.
Signed-off-by: Martin Storsjö <martin@martin.st>
this condition breaks reading from the pipe as data_reached variable
have to be set to break while in the asf_read_header just after the Data
Object is found
Signed-off-by: Anton Khirnov <anton@khirnov.net>
A bug was introduced in 977105407c whereby when
frame height wasn't divisible by the number of threads, pixels would be omitted
from the bottom rows during decode.
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
A bug was introduced in 6b2b26e7af whereby when
frame height wasn't divisible by the number of threads, pixels would be omitted
from the bottom rows during decode.
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
The current code expects query_formats() to be called exactly once, it
will leak if it's not called at all (filter initialized, but never
configured or used) or try to read freed memory if it's called more than
once.
Found-by: James Almer <jamrial@gmail.com>
CC: libav-stable@libav.org
* commit 'aed7715b8fa295980c221f1cd095d42cd3bd74a6':
asfdec: increment nb_streams right after the stream allocation
Merged-by: Michael Niedermayer <michael@niedermayer.cc>
* commit 'ee80f834cbb6dbacdc1efb4c658a7d775e82ebff':
asfdec: set nb_streams to 0 in the asf_read_close
Merged-by: Michael Niedermayer <michael@niedermayer.cc>
Fixes compilation of host tool aacps_fixed_tablegen
Reviewed-by: Michael Niedermayer <michael@niedermayer.cc>
Signed-off-by: James Almer <jamrial@gmail.com>
Use macros from aac_defines.h for adding suffixes
instead of local macros.
Signed-off-by: Nedeljko Babic <nedeljko.babic@imgtec.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
The test file they use needs avdevice to be created
Probably fixes Ticket 4455
Reviewed-by: James Almer <jamrial@gmail.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
The stats are a superset of the quality factor, also allowing the picture type and encoder "PSNR" stats to be exported
This also replaces the native by fixed little endian order for the affected side data
AV_PKT_DATA_QUALITY_FACTOR is left as a synonym of AV_PKT_DATA_QUALITY_STATS
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
* commit '2a187a074a7f5ad9f01f72ac9715ddfcb2dbb8ec':
asfdec: avoid crash in the case when chunk_len is 0 or pkt_len is 0
Merged-by: Michael Niedermayer <michael@niedermayer.cc>
* commit '93f16f338f9e8aba0c006752eb3afc3fe6e137fd':
asfdec: close the demuxer properly when read_header is failing
Merged-by: Michael Niedermayer <michael@niedermayer.cc>
* commit '5655236a67203d923755f285584c6e68abe7e33f':
asfdec: factor out seeking to the Data Object outside while
Merged-by: Michael Niedermayer <michael@niedermayer.cc>
* commit 'ecee1148af4989e1f9e16f0cdc9f98ad2045538c':
qsvenc_hevc: use the correct HW plugin UID
Merged-by: Michael Niedermayer <michael@niedermayer.cc>
* commit 'e605bf3b590d295f215fcc9fd58eb11be55b68cb':
checkasm: remove empty array initializer list in h264pred test
Merged-by: Michael Niedermayer <michael@niedermayer.cc>
This should not change anything as the spec requires specific values
for the fields, which where handled previously.
Ask for samples when these values do not match
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
This patch takes care of the secondary color changes in ASS through highlight and hilightcolor boxes.
Signed-off-by: Niklesh <niklesh.lalwani@iitb.ac.in>
This patch reorganizes the code to make it easier to add support for different text modifier boxes and other styles in the future.
Signed-off-by: Niklesh <niklesh.lalwani@iitb.ac.in>
And prevent eventual compilation failures once the relevant functions
and fields are removed.
Reviewed-by: Michael Niedermayer <michael@niedermayer.cc>
Signed-off-by: James Almer <jamrial@gmail.com>
It's done automatically by avcodec_open2() now.
Fixes memleaks in fate-libavcodec-options.
Reviewed-by: Michael Niedermayer <michael@niedermayer.cc>
Signed-off-by: James Almer <jamrial@gmail.com>
* commit '219b39a71a5694b1c14a07b86477f665a5b6849b':
parseutil: Use non ambiguous aliases for uhd
Conflicts:
doc/ffmpeg.texi
libavutil/parseutils.c
Merged-by: Michael Niedermayer <michael@niedermayer.cc>
This commit moves the generation of ff_aac_pow34sf_tab[] out of the
encoder and into the table generator. The original commit log for
this table in 2011 actually mentions that it should be moved outside
but this never happened.
This is the first commit which cleans up the encoder a little.
Reviewed-by: Claudio Freire <klaussfreire@gmail.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Enjoy some cache locality and use less threads.
About 5x speedup (from 60ms to 12ms to decode a 4k frame).
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
* commit '9ed6f9a17cc1f7d3699a1223783dadc1ee222069':
arm: use a local label instead of the function symbol in ff_prefetch_arm
See: cab6302534
Merged-by: Michael Niedermayer <michael@niedermayer.cc>
With side data now being added to every MPEG*/H26* video encoder
in the form of a quality scalar, software which simply stores
the pkt->data to get an ES stream would break.
This also as a side-effect makes the code faster
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
* commit '5d3addb937946eca5391e40b5e6308e74ac6f77b':
Add a quality factor packet side data
Conflicts:
doc/APIchanges
ffmpeg.c
libavcodec/avcodec.h
libavcodec/mpegvideo_enc.c
libavcodec/version.h
Merged-by: Michael Niedermayer <michael@niedermayer.cc>
* commit '75c1ed2e4c7250f5e75a11d0140727054ff0136b':
ffv1enc: Use input frame to set SAR and interlacing
Conflicts:
libavcodec/ffv1enc.c
No change as the removed coded_frame uses where not in the code anymore
Merged-by: Michael Niedermayer <michael@niedermayer.cc>
* commit 'd6006dd9f0d4d01023359230212f1f9fa4800e5b':
libvpxenc: Do not entangle coded_frame
Conflicts:
libavcodec/libvpxenc.c
Merged-by: Michael Niedermayer <michael@niedermayer.cc>
* commit '56672aeaee19216d2fd8eeb9964b1f71f0af2919':
svq1enc: Do not entangle coded_frame
Conflicts:
libavcodec/svq1enc.c
Merged-by: Michael Niedermayer <michael@niedermayer.cc>
* commit '05fb4c9aaf84b59f8ab1ce8d4c0f49dd12113024':
proresenc: Do not entangle coded_frame
Conflicts:
libavcodec/proresenc_kostya.c
Merged-by: Michael Niedermayer <michael@niedermayer.cc>
* commit '91767360d86ac786571593ab11c7291010ab3829':
a64multienc: Do not entangle coded_frame
Conflicts:
libavcodec/a64multienc.c
Merged-by: Michael Niedermayer <michael@niedermayer.cc>
The C functions return uint8/16_t but that is effectively int not unsigned int
Fixes fate-filter-tblend
We do not return uint8/16_t as that would require the compiler to truncate the
values, slowing it down.
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
The rationale is that coded_frame was only used to communicate key_frame,
pict_type and quality to the caller, as well as a few other random fields,
in a non predictable, let alone consistent way.
There was agreement that there was no use case for coded_frame, as it is
a full-sized AVFrame container used for just 2-3 int-sized properties,
which shouldn't even belong into the AVCodecContext in the first place.
The appropriate AVPacket flag can be used instead of key_frame, while
quality is exported with the new AVPacketSideData quality factor.
There is no replacement for the other fields as they were unreliable,
mishandled or just not used at all.
Signed-off-by: Vittorio Giovara <vittorio.giovara@gmail.com>
This is necessary to preserve the quality information currently exported
with coded_frame. Add the new side data to every encoder that needs it,
and use it in avconv.
Signed-off-by: Vittorio Giovara <vittorio.giovara@gmail.com>
Allocating coded_frame is what most encoders do anyway, so it makes
sense to always allocate and free it in a single place. Moreover a lot
of encoders freed the frame with av_freep() instead of the correct API
av_frame_free().
This bring uniformity to encoder behaviour and prevents applications
from erroneusly accessing this field when not allocated. Additionally
this helps isolating encoders that export information with coded_frame,
and heavily simplifies its deprecation.
Signed-off-by: Vittorio Giovara <vittorio.giovara@gmail.com>
This change (and the following ones of the same kind) is mainly to
simplify wrapping this section with an #if FF_API block later on.
No functional changes are applied, the fields of the context coded_frame
fields are directly initialized, instead of keeping a reference to the
coded_frame itself.
Signed-off-by: Vittorio Giovara <vittorio.giovara@gmail.com>
Fixes Ticket4664
The changed fate tests lack red/blue shades and thus look correct
either way
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
* commit '6b15874fc2c3f565732201f7907ae1112727d6ae':
af_resample: do not touch the timestamps if we are not resampling
Merged-by: Michael Niedermayer <michael@niedermayer.cc>
* commit '1959351aecf09fc3e90208ff775f4849801dc13f':
avconv: move the no streams failure to open_output_file()
Merged-by: Michael Niedermayer <michael@niedermayer.cc>
* commit 'bd2ab27c488ae92c7820efe11d4f53d84e94d58e':
avconv: use read_file() for reading the 2pass stats
Conflicts:
cmdutils.c
cmdutils.h
ffmpeg_opt.c
Merged-by: Michael Niedermayer <michael@niedermayer.cc>
* commit '59245e0c5e10a849e67c632cccf4f677b2442e82':
avconv: set the encoding/decoding_needed flags earlier
Conflicts:
ffmpeg.c
Merged-by: Michael Niedermayer <michael@niedermayer.cc>
* commit '56c2f37727015212a404cae0f444d8bc8704d691':
avconv: drop update_sample_fmt()
Conflicts:
ffmpeg.c
No change as the removed code is not in FFmpeg
Merged-by: Michael Niedermayer <michael@niedermayer.cc>
* commit '2883ef34b59c9b427c4cfad4620c3235e5778406':
asfdec: read the replicated data in a separate function
Merged-by: Michael Niedermayer <michael@niedermayer.cc>
* commit '0989d3ad1fbd7509815208b0a5792918492d2a68':
asfdec: convert condition for the replicated data reading to be safer
Merged-by: Michael Niedermayer <michael@niedermayer.cc>
* commit '406627287e015ce381795e85e2557b12bf60ca35':
asfdec: do not read replicated data when their length is 0
Merged-by: Michael Niedermayer <michael@niedermayer.cc>
This filter currently assumes that the input audio is continuous and
does some timestamps manipulation based on this assumption.
This is unnecessary if we are only converting the channel layout or the
sample format, without resampling. In such a case, just leave the
timestamps as they are.
The current code is less than straightforward due to the fact that
output streams can be created based on filtergraph definitions. This
change should make the code simpler and more readable. It will also be
useful in the future commits.
Since global options are processed before all the other options now, we
do not have to try creating the complex filtergraphs several times
anymore, it is enough to do it once after the input files are opened.
There is only one decoder left that supports this (libopus, which is not
used by default since we have a native one) and this code goes against
the avconv design, since it propagates information back from the encoder
to decoder.
Recent ICC versions that define GCC as >= 4.5 (like ICC 13) apparently can't
optimize the generic C versions of av_bswap*() on their own.
Reviewed-by: Michael Niedermayer <michaelni@gmx.at>
Signed-off-by: James Almer <jamrial@gmail.com>
Intel compiler also defines __GNUC__, so the Intel specific intrinsics were not
really being used.
Reviewed-by: Michael Niedermayer <michaelni@gmx.at>
Signed-off-by: James Almer <jamrial@gmail.com>
avoids null pointer dereference
Fixes: signal_sigsegv_d5de40_964_vp80-00-comprehensive-010.ivf with memlimit of 1048576
Found-by: Samuel Groß, Mateusz "j00ru" Jurczyk and Gynvael Coldwind
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Fixes: signal_sigsegv_d5de23_967_vp80_00_comprehensive_010.ivf with memlimit 524288
Found-by: Samuel Groß, Mateusz "j00ru" Jurczyk and Gynvael Coldwind
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Fixes null pointer dereference
Fixes: signal_sigsegv_b02a96_280_RL_420p_ffdirac.drc with memlimit of 67108864
Found-by: Samuel Groß, Mateusz "j00ru" Jurczyk and Gynvael Coldwind
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Avoids leaving stale pointers
Fixes: signal_sigabrt_7ffff70eccc9_819_sabtriple.rm with memlimit 536870912
Found-by: Samuel Groß, Mateusz "j00ru" Jurczyk and Gynvael Coldwind
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
* commit '82e6ac85ff9aa7631b8c01521b3d6b5ca0bc8014':
checkasm: test all architectures with optimisations
Merged-by: Michael Niedermayer <michael@niedermayer.cc>
* commit 'cb33f8d0f48b1e9d642ca1cbea142dcbedd08a27':
checkasm: Give macro a body to avoid potential unexpected syntax issues
See: a39512ba9e
Merged-by: Michael Niedermayer <michael@niedermayer.cc>
* commit '6cc4d3e9a982e926494f4b919d9733fe29774acf':
checkasm: exit with status 0 instead of 1 if there are no tests to perform
Merged-by: Michael Niedermayer <michael@niedermayer.cc>
* commit '256ef19844892c6cf8e0386e3287bae970ec6320':
h264: arm: use intra pred8x8 functions only for chroma_format_idc <= 1
Conflicts:
libavcodec/arm/h264pred_init_arm.c
See: 565cabf5c8
Merged-by: Michael Niedermayer <michael@niedermayer.cc>
* commit 'e1319aa1c1be9b64117c19170344fb78841dd67c':
libx264: Add support for the MPEG2 encoder
Conflicts:
configure
libavcodec/Makefile
libavcodec/libx264.c
Merged-by: Michael Niedermayer <michael@niedermayer.cc>
Fixes: signal_sigabrt_7ffff70eccc9_498_divx502.avi with memlimit 1572864
Found-by: Samuel Groß, Mateusz "j00ru" Jurczyk and Gynvael Coldwind
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
The upper halves are not guaranteed to be zero in x86-64.
Also use `test` instead of `and` when the result isn't used for anything other
than as a branch condition, this allows some register moves to be eliminated.
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
* commit '0cf5588d69922aa3e063bac6304c09c543a9ef52':
hq_hqa: Fix decoding when INFO section is absent
Merged-by: Michael Niedermayer <michael@niedermayer.cc>
* commit 'a53540840d26beb57a5e53b7f488c23ddf86e193':
APIchanges: Mention lavfi and lavd identification symbol addition
Conflicts:
doc/APIchanges
No change as these symbols have been added a very long time ago to FFmpeg
and are already listed in APIchanges
Merged-by: Michael Niedermayer <michael@niedermayer.cc>
* commit 'f1840b070dd449ad25e1ebbab463f10863a5e0f1':
Revert "mov: Double-check that alias path is not an absolute path"
Conflicts:
libavformat/mov.c
See: c9c7263e58
Merged-by: Michael Niedermayer <michael@niedermayer.cc>
Decays and attacks where by default set only for first channel
which caused poor defaults to be used which produced clipping
on any higher channel.
Reported-by: lachs0r
Signed-off-by: Paul B Mahol <onemda@gmail.com>
Export symbols by name rather then ordinal.
Remove PROTMODE directive as it does not make sense for 32 bit library.
Also silences a warning from some linkers.
Signed-off-by: Dave Yeo <dave.r.yeo@gmail.com>
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
* cehoyos/master:
lavfi/af_pan: Support a maximum of 64 channels.
lswr: Allow 64 channels internally.
lavc: Allow 64 channels internally.
Merged-by: Michael Niedermayer <michael@niedermayer.cc>
This is needed later for outpoint support which may leave the last file in a
not-eof state.
Reviewed-by: Nicolas George <george@nsup.org>
Signed-off-by: Marton Balint <cus@passwd.hu>
Some uses of Snappy require uncompressing to positions within an existing buffer. Also adds a function to get the uncompressed length of Snappy data.
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
This change will reject frames with a texture type which doesn't match the stream description.
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
This patch adds MSA (MIPS-SIMD-Arch) optimizations for VP9 MC functions in new file vp9_mc_msa.c
Signed-off-by: Shivraj Patil <shivraj.patil@imgtec.com>
Reviewed-by: "Ronald S. Bultje" <rsbultje@gmail.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Fixes: b4b47bc2b3fb7ca710bfffe5aa969e37_signal_sigabrt_7ffff70eccc9_744_nc_sample2.avi with memlimit of 4194304
Found-by: Samuel Groß, Mateusz "j00ru" Jurczyk and Gynvael Coldwind
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
* commit '4512ee78e19fdb011bdec1b3a8dc0b315c82a81e':
mpegts: Mark the muxer as supporting variable fps
Merged-by: Michael Niedermayer <michael@niedermayer.cc>
* commit 'c88c5eef53ff1619724ba47b722da64ec0593dab':
hevc: Split the struct setup from the pps parsing
Conflicts:
libavcodec/hevc_ps.c
Merged-by: Michael Niedermayer <michael@niedermayer.cc>
Fixes use of uninitialized memory
Fixes: a96874b9466b6edc660a519c7ad47977_signal_sigsegv_7ffff713351a_744_nc_sample.avi with memlimit 2147483648
Found-by: Samuel Groß, Mateusz "j00ru" Jurczyk and Gynvael Coldwind
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
With gcc-4.9.2 loongson faild in test fate-dca, this is caused by option
-fexpensive-optimizations in -O3 optimization. We disable it temporarily
before the bug been fixed up.
Signed-off-by: ZhouXiaoyong <zhouxiaoyong@loongson.cn>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Speed of all modes increased by a factor between 7.4 and 19.8 largely depending
on whether bytes are unpacked into words. Modes 2, 3, and 4 have been sped-up
by a factor of 43 (thanks quick sort!)
All modes are available on x86_64 but only modes 1, 10, 11, 12, 13, 14, 19, 20,
21, and 22 are available on x86 due to the number of SIMD registers used.
With a contribution from James Almer <jamrial@gmail.com>
Possibly fixes Ticket4671
the removed check is wrong and insufficient
Based on patch by Maksym Veremeyenko <verem@m1.tv>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
The internal line accumulator for 16bit can overflow, so I changed that
from int to uint64_t in the C code. The matching assembly looks a little
weird but output looks correct.
(avx2 should be trivial to add later.)
Reviewed-by: Paul B Mahol <onemda@gmail.com>
Reviewed-by: James Almer <jamrial@gmail.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Fixes: 39a25908b84604acdaa490138282d091_signal_sigsegv_7ffff713351a_331_WAWV.avi with memlimit of 262144
Found-by: Samuel Groß, Mateusz "j00ru" Jurczyk and Gynvael Coldwind
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Fixes: 260813283176b57b3c9974fe284eebc3_signal_sigsegv_7ffff713351a_991_xtrem_e2_m64q15_a32sxx.3gp with memlimit of 262144
Found-by: Samuel Groß, Mateusz "j00ru" Jurczyk and Gynvael Coldwind
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Fixes: 1013dbde2c360d939cc2dfc33e4f275c_signal_sigsegv_a0500f_45_320vp3.nsv with memlimit of 536870912
Found-by: Samuel Groß, Mateusz "j00ru" Jurczyk and Gynvael Coldwind
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Fixes: 18615ff56beedc63a884a8db0678b47c_signal_sigsegv_7ffff713351a_991_xtrem_e2_m64q15_a32sxx.3gp with memlimit of 524288
Found-by: Samuel Groß, Mateusz "j00ru" Jurczyk and Gynvael Coldwind
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
* commit 'a5a6a786bfebb85c269abc25559fd71963983581':
mp3: Forward seeking errors
Conflicts:
libavformat/mp3dec.c
No change as the avio_seek() that are part of seeking in mp3 are already
checked in FFmpeg
Merged-by: Michael Niedermayer <michael@niedermayer.cc>
* commit '8e373fe048812a25b238ea60a7052b8c07639a42':
hevc: Factor out the pixel format mapping from the sps parser
Conflicts:
libavcodec/hevc_ps.c
Merged-by: Michael Niedermayer <michael@niedermayer.cc>
* commit 'c571424c7f6276a6374e1784ce2a33d4b6a4292d':
asfdec: prevent memory leaks found with Coverity Scan
Merged-by: Michael Niedermayer <michael@niedermayer.cc>
Fixes: 0d0a2bace067d09c08f0fa5340496c23_signal_sigsegv_7ffff713351a_342_WobblyWindowsIntro.avi with memlimit of 67108864
Found-by: Samuel Groß, Mateusz "j00ru" Jurczyk and Gynvael Coldwind
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Fixes: 09e670595acbdafb226974b08dab66e3_signal_sigabrt_7ffff70eccc9_991_xtrem_e2_m64q15_a32sxx.3gp with memlimit of 1048576
Found-by: Samuel Groß, Mateusz "j00ru" Jurczyk and Gynvael Coldwind
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Fixes null pointer dereferences
Fixes: af1a5a33e67e479f439239097bd0d4fd_signal_sigsegv_7ffff713351a_152_Dolby_Rain_Logo.pmp with memlimit of 8388608
Found-by: Samuel Groß, Mateusz "j00ru" Jurczyk and Gynvael Coldwind
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
If it's not, then the new dependence-free parser will be used instead
Reviewed-by: Michael Niedermayer <michaelni@gmx.at>
Signed-off-by: James Almer <jamrial@gmail.com>
Fixes: af94b3a3d26586c08f557cafe8246251_signal_sigsegv_7ffff713351a_343_XFMode.ASF with 2097152 alloc limit
Found-by: Samuel Groß, Mateusz "j00ru" Jurczyk and Gynvael Coldwind
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Fixes: af94b3a3d26586c08f557cafe8246251_signal_sigsegv_7ffff713351a_343_XFMode.ASF with 1048576 alloc limit
Found-by: Samuel Groß, Mateusz "j00ru" Jurczyk and Gynvael Coldwind
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
* commit 'b9f76d19d81fbc7f088536f966c2d3dc23c34ddc':
hevc_ps: make sure failing to decode an SPS always returns an error
Conflicts:
libavcodec/hevc_ps.c
See: 15893adbdb
Merged-by: Michael Niedermayer <michael@niedermayer.cc>
* commit '077b55943330150db0eafd36bbee614697cabd98':
hevc: handle a NULL sps in set_sps() properly
Merged-by: Michael Niedermayer <michael@niedermayer.cc>
* commit '18156b53f9b642b71c182c5c9818175a61572d2b':
hevc: do not pass an entire HEVCContext into export_stream_params()
Merged-by: Michael Niedermayer <michael@niedermayer.cc>
Fixes crash in 1288a2fe8e9ae6b00ca40e089d08ca65_signal_sigsegv_7ffff71426a7_354_accident.san with allocation limit 65536
Found-by: Samuel Groß, Mateusz "j00ru" Jurczyk and Gynvael Coldwind
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Fixes: 06a4edb39ad8a9883175f9bd428334a2_signal_sigsegv_7ffff713351a_706_mov__alac__ALAC_6ch.mov
Found-by: Samuel Groß, Mateusz "j00ru" Jurczyk and Gynvael Coldwind
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Theres no known case where its use on local files improves performance
if you know of such a case, please contact us
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
internal.h is difficult to use due to circular dependancies
mem.h is a public header ff_* is not public
Alternative solutions probably are possible too
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Feel free to use either, they both work but the old one provides
more information but needs the hevc decoder
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
* commit 'd82e1adc2019135a2fc45372e0ed0b5ef107cdd0':
hevc: move splitting the packet into NALUs into a separate function
Conflicts:
libavcodec/hevc.c
libavcodec/hevc.h
libavcodec/hevc_parse.c
Merged-by: Michael Niedermayer <michael@niedermayer.cc>
* commit 'ae05b4865514fd71b5e9431e93aa0d03d7ba7751':
hevc: eliminate the second call to hls_nal_unit()
Conflicts:
libavcodec/hevc.c
Merged-by: Michael Niedermayer <michael@niedermayer.cc>
* commit 'd7bebe4805193783f0b6f292f9127a75709fb7d9':
hevc: skip invalid/ignored NALUs when splitting the packet
Merged-by: Michael Niedermayer <michael@niedermayer.cc>
* commit 'ab05ed4c322ed0488ac9b5d2ef5d4ffa55a946a7':
mpegvideo_parser: export pixel format and dimensions
Conflicts:
libavcodec/mpegvideo_parser.c
Merged-by: Michael Niedermayer <michael@niedermayer.cc>
* commit 'a9a2f3613040c4f90bf15cbd76f8671252ecc043':
doc: add a section about building with libmfx
Conflicts:
doc/general.texi
Merged-by: Michael Niedermayer <michael@niedermayer.cc>
* commit '86eee85daddb682fa072c2e2657c90a514b855e3':
bytestream2: set the reader to the end when reading more than available
Merged-by: Michael Niedermayer <michael@niedermayer.cc>
This also prevents an eventual compilation failure once request_channels
is removed.
Reviewed-by: Michael Niedermayer <michaelni@gmx.at>
Signed-off-by: James Almer <jamrial@gmail.com>
Also, make hls_nal_unit() work only on the provided NAL unit, without
requiring a whole decoding context.
This will allow splitting this code for reuse by the parser.
This prevents possible infinite loops with the calling code along the
lines of while (bytestream2_get_bytes_left()) { ... }, where the reader
does not advance.
CC: libav-stable@libav.org
It provides the following features:
* verify correctness by comparing output to the C version.
* detect failure to save and restore clobbered callee-saved registers.
* detect 32-bit parameters being used as if they were 64-bit in x86-64
(the upper halves are not guaranteed to be zero - but in practice
they very often are, which makes those bugs hard to spot otherwise).
* easy benchmarking.
Compile by running 'make checkasm'.
Execute by running 'tests/checkasm/checkasm'.
Optional arguments are '--bench' to run benchmarks for all functions,
'--bench=<pattern>' to run benchmarks for all functions that starts with
<pattern>, and '<integer>' to seed the PRNG for reproducible results.
Contains unit tests for most h264pred functions to get started, more tests
can be added afterwards using those as a reference.
Loosely based on code from x264. Currently only supports x86 and x86-64,
but additional architectures shouldn't be too much of an obstacle to add.
Note that functions with floating point parameters or floating point
return values are not supported. Some compiler-specific features or
preprocessor hacks would likely be required to add support for that.
Signed-off-by: Janne Grunau <janne-libav@jannau.net>
* commit '796268654c7807c9a1cfb322c838383e2b900d60':
asfdec: always reset packet state after seeking
Merged-by: Michael Niedermayer <michael@niedermayer.cc>
* commit 'c1d647b15afa69fa70f999a9ddcb98346409fb4d':
mp3: Make the seek more robust
Conflicts:
libavformat/mp3dec.c
Mostly not merged
See: b6267901c4 and various later commits
The bug is also not reproducable in FFmpeg
Merged-by: Michael Niedermayer <michael@niedermayer.cc>
This makes the output compatible with that of pretty much any other
tool that calculates PSNR.
Reviewed-by: Paul B Mahol <onemda@gmail.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
* commit '1410eeb6ea6bc5784e40032430afcdf54a79aedb':
imc: Use correct position for flcoeffs2 calculation
See: 75fd5ce4c1
Merged-by: Michael Niedermayer <michael@niedermayer.cc>
flcoeffs2[pos] should be the log2 of flcoeffs1[pos].
flcoeffs1[0] can be 0 here, thus flcoeffs2[pos] gets set to -inf,
causing problems further down.
This seems to have been copied from imc_decode_level_coefficients in
commit 4eb4bb3 without updating the position.
Reviewed-by: Michael Niedermayer <michaelni@gmx.at>
Signed-off-by: Andreas Cadhalpun <Andreas.Cadhalpun@googlemail.com>
flcoeffs2[pos] should be the log2 of flcoeffs1[pos].
flcoeffs1[0] can be 0 here, thus flcoeffs2[pos] gets set to -inf,
causing problems further down.
This seems to have been copied from imc_decode_level_coefficients in
commit 4eb4bb3 without updating the position.
Signed-off-by: Andreas Cadhalpun <Andreas.Cadhalpun@googlemail.com>
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
Fixes: asan_double-free_d34593_861_smp3.wmv
Found-by: Samuel Groß, Mateusz "j00ru" Jurczyk and Gynvael Coldwind
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
It asserts that the frame linesize is larger than 37, but it can be
smaller and decoding such frames works.
Before commit cc884a35 src_stride > 7*MB_SIZE was necessary, because the
blocks were interleaved in the tmp buffer and the last block was added
with an offset of 6*MB_SIZE.
It was changed for src_stride <= 7*MB_SIZE to write the blocks
sequentially, hence the larger tmp_step.
After that the assert was only necessary to make sure that the buffer
remained large enough.
Since commit bd2b6b33 s->scratchbuf is used as tmp buffer.
As part of commit 86e107a7 the minimal scratchbuf size was increased to
256*7*MB_SIZE, which is enough for any src_stride <= 7*MB_SIZE.
Also add a comment explaining the tmp_step calculation.
Signed-off-by: Andreas Cadhalpun <Andreas.Cadhalpun@googlemail.com>
Fixes: asan_heap-oob_394322e_138_cov_4265020547_CVPCMNL1_SVA_C.264
Found-by: Samuel Groß, Mateusz "j00ru" Jurczyk and Gynvael Coldwind
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
* commit '461b45efd04859b2672238bc8a6ecab9e9a14948':
lavc: Add nvenc.h to the skipheader
Conflicts:
libavcodec/Makefile
No change as there is no nvenc.h in FFmpeg
Merged-by: Michael Niedermayer <michaelni@gmx.at>
This ensures that no stale pointers leak through on any path
Fixes: signal_sigsegv_c3097a_991_xtrem_e2_m64q15_a32sxx.3gp
Found-by: Samuel Groß, Mateusz "j00ru" Jurczyk and Gynvael Coldwind
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Build system modified
There are several warnings occurring during build after this patch is
applied. The cause of most of these warnings is in that some definitions
needed here are logical part of sbr module and are added in later patches.
When this patches are applied these warnings stop occurring.
The only warning that is added here and is not fixed with later patches
is warning that warns that type mismatch for table ff_aac_eld_window_480.
The reason for this warning is in that ER AAC ELD 480 is not integrated in
to the fixed point implementation at this moment and there is no fixed point
version of this table.
Signed-off-by: Nedeljko Babic <nedeljko.babic@imgtec.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Add fixed point implementation of functions for generating tables
Signed-off-by: Nedeljko Babic <nedeljko.babic@imgtec.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* commit '84b223cc6d6ed4cc8bd295457a90f7c94a9dd784':
configure: Make the new qsv encoder depend on libmfx
Conflicts:
configure
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '40af330adf7fde8073271cf2b41ff9adc4c2bba9':
avconv: vda: Unlock the pixel buffer once it is accessed
See: c06fdacc3d
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '8fcd121b823caeadbe7597c9ae9229f6f164f949':
doc: Use the succinct syntax for the channelmap example
Conflicts:
doc/filters.texi
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '69ab9f53f901eac6a649e22d28cf093357870627':
hevc: split bitstream unescaping to a separate file
Conflicts:
libavcodec/Makefile
libavcodec/hevc.c
See: afa93d198a
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'fd124d8357b1becfde3ac8d5e3320127cf97a5b7':
hevc_ps: split the code for parsing the SPS and exporting it into the context
Conflicts:
libavcodec/hevc.c
libavcodec/hevc_ps.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '0e7c0ec344f542e68e3cc9680e8d41dffeffdb4e':
lavf/hevc: pad the RBSP buffer as required by the bistream reader
Merged-by: Michael Niedermayer <michaelni@gmx.at>
If init_get_bits fails the GetBitContext is invalid and must not be
used. Check the return value in dirac_header and propogate the error.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
For example, the encoder may return MFX_WRN_INCOMPATIBLE_VIDEO_PARAM warning
i.e. ret==5 old loop implementation will repeat several times until output buffer
overflow. New implementation explicitly uses loop only for device busy case.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* commit '02b7c630875c0bc63cee5ec597aa33baf9bf4e20':
h261: Signal freeze picture release for intra frames
Conflicts:
tests/ref/vsynth/vsynth1-h261
tests/ref/vsynth/vsynth2-h261
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Improves the accuracy of measurements, especially in short sections.
To quote the Intel 64 and IA-32 Architectures Software Developer's Manual:
"The RDTSC instruction is not a serializing instruction. It does not necessarily
wait until all previous instructions have been executed before reading the counter.
Similarly, subsequent instructions may begin execution before the read operation
is performed. If software requires RDTSC to be executed only after all previous
instructions have completed locally, it can either use RDTSCP (if the processor
supports that instruction) or execute the sequence LFENCE;RDTSC."
SSE2 is a requirement for lfence so only use it on SSE2-capable systems.
Prefer lfence;rdtsc over rdtscp since rdtscp is supported on fewer systems.
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
Avoid possible issues with memmapped hardware buffers in
case VDA is not doing a conversion on behalf of the user
and make the code more proper as working example.
CC: libav-stable@libav.org
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
Fixes out of array read
Fixes: asan_heap-oob_394322e_138_cov_4265020547_CVPCMNL1_SVA_C.264
Found-by: Samuel Groß, Mateusz "j00ru" Jurczyk and Gynvael Coldwind
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Otherwise a frame with non-zero nb_samples but without any data can be
returned.
Reviewed-by: Michael Niedermayer <michaelni@gmx.at>
Signed-off-by: Andreas Cadhalpun <Andreas.Cadhalpun@googlemail.com>
Since the new PNS implementation has been merged and is no longer considered
proof of concept (as it's much more complex and better than the previous), change
the comments to reflect that. We need people testing it (since all AAC profiles
require it to be on by default) and having it tagged as proof of concept might drive some away.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
When compiling libavutil/internal.h as C++11, clang warns that a space
is required between a string literal and an identifier. Put spaces
in concatenations of string literals and EXTERN_PREFIX.
Signed-off-by: Chris Watkins <watk@chromium.org>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Freeze picture release should be set to 1 when we're responding to a
fast update request. For simplicity we set it for all intra frames,
including those that starts a GOP.
Fixes issue where Tandberg MXP1700 does not recover from packet loss
state since it's waiting for the freeze picture relase indication.
Bug-Id: 873
CC: libav-stable@libav.org
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
Ref H.261 recommendation section 4.2.1.3, setting the still image flag
to 1 disables still image mode. Some decoders require this in order to
decode the bitstream as normal video.
Fixes H.261 calls to Cisco E20.
Also, reserved (aka spare) bits should be set to 1 unless specified
otherwise.
Bug-Id: 872
CC: libav-stable@libav.org
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
This patch adds MSA (MIPS-SIMD-Arch) optimizations for idctdsp functions in new file idctdsp_msa.c and simple_idct_msa.c
Signed-off-by: Shivraj Patil <shivraj.patil@imgtec.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Loongson has disabled all mipsfpu optimization as fate-test faild.
Signed-off-by: ZhouXiaoyong <zhouxiaoyong@loongson.cn>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
This patch adds MSA (MIPS-SIMD-Arch) optimizations for me_cmp functions in new file me_cmp_msa.c
Signed-off-by: Shivraj Patil <shivraj.patil@imgtec.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
This patch adds MSA (MIPS-SIMD-Arch) optimizations for mpegvideoencdsp functions in new file mpegvideoencdsp_msa.c
Signed-off-by: Shivraj Patil <shivraj.patil@imgtec.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
This should ensure that each frame get its metadata from its proper packet
regardless of frame delays caused by reordering or threading.
Signed-off-by: Marton Balint <cus@passwd.hu>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
the later is not optimal when the buffer size is well known at allocation time
This avoids a memcpy()
Overall 2.5% speedup with a random 1920x1080 video
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
This commit implements intensity stereo coding support
to the native aac encoder. This is a way to increase the efficiency
of the encoder by zeroing the right channel's spectral coefficients
(in a channel pair) and rederiving them in the decoder using information
from the scalefactor indices of special band types. This commit
confomrs to the official ISO 13818-7 specifications, although due to
their ambiguity certain deviations have been taken to ensure maximum
sound quality. This commit has been extensively tested and has shown
to not result in audiable audio artifacts unless in extreme cases.
This commit also adds an option, aac_is, which has the value of
0 by default. Intensity Stereo is part of the scalable aac profile
and is thus non-default.
The way IS coding works is that it rederives the right channel's
spectral coefficients from the left channel via the scalefactor
index values left in the right channel. Since an entire band's
spectral coefficients do not need to be coded, the encoder's
efficiency jumps up and it unzeroes some high frequency values
which it previously did not have enough bits to encode. That way
less information is lost than the information lost by rederiving
the spectral coefficients with some error. This is why the
filesize of files encoded with IS do not decrease significantly.
Users wishing that IS coding should reduce filesize are expected
to reduce their encoding bitrates appropriately.
This is V2 of the commit. The old version did not mark ms_mask as
0 since M/S and IS coding are incompactible, which resulted in
distortions with M/S coding enabled. This version also improves
phase detection by measuring it for every spectral coefficient in
the band and using a simple majority rule to determine whether the
coefficients are in or out of phase. Also, the energy values per
spectral coefficient were changed as to reflect the
official specifications.
Reviewed-by: Claudio Freire <klaussfreire@gmail.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
This commit adds support for the coding of intensity stereo spectral
coefficients. It also fixes the Mid/Side coding of band_types higher
than RESERVED_BT (M/S must not be applied to their spectral coefficients,
but marking M/S as present in encode_ms_info() is okay). Much
of the changes here were taken from the decoder and inverted.
This commit does not change the functionality of the decoder as the
previous patch in this series zeroes ms_mask and is_mask.
Reviewed-by: Claudio Freire <klaussfreire@gmail.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
This commit finalizes the PNS implementation previously added to the encoder
by moving it to a seperate function search_for_pns() and thus making it
coder-generic. This new implementation makes use of the spread field of
the psy bands and the lambda quality feedback paremeter. The spread of the
spectrum in a band prevents PNS from being used excessively and thus preserve
more phase information in high frequencies. The lambda parameter allows
the number of PNS-marked bands to vary based on the lambda parameter and the
amount of bits available, making better choices on which bands are to be marked
as noise. Comparisons with the previous PNS implementation can be found
here: https://trac.ffmpeg.org/attachment/wiki/Encode/AAC/
This is V2 of the patch, the changes from the previous version being that this
version uses the new band->spread metric from aacpsy and normalizes the
energy using the group size. These changes were suggested by Claudio Freire
on the mailing list. Another change is the use of lambda to alter the
frequency threshold. This change makes the actual threshold frequencies
vary between +-2Khz of what's specified, depending on frame encoding performance.
Reviewed-by: Claudio Freire <klaussfreire@gmail.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
This commit undoes commit c5d4f87e81
and removes PNS band marking from the twoloop coder, which has
been reimplemented in a better way in this series of patches.
Reviewed-by: Claudio Freire <klaussfreire@gmail.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
This commit enables the function added with commit 7c10b87 and uses that
new function for setting any special scalefactor indices. This commit does
not change the behaviour of the encoder since no bands are being marked as
either NOISE_BT(due to the previous PNS implementation removed in the
previous commit) or INTENSITY_BT2/INTENSITY_BT.
Reviewed-by: Claudio Freire <klaussfreire@gmail.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Newer versions of the nvenc hardware support The High 444 Predictive profile
of H.264, and can also do lossless encoding under this profile if desired.
This change introduces support for the profile, and exposes the appropriate
presets for requesting lossless encoding.
I tested lossless by generating a baseline sample with testsrc converted
to raw yuv444p, then encoded the sample with nvenc, then did a framemd5
comparision of both the raw video and the nvenc encode. The framemd5
reports were identical.
Signed-off-by: Philip Langdale <philipl@overt.org>
Signed-off-by: Timo Rothenpieler <timo@rothenpieler.org>
This change fixes a bug where a test that required a sample was being included
in the suite when SAMPLES was not set. It also improves the consistency of
variable names relating to the API tests.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'f046c3b5ac36848cce824b008e0347c621523041':
lavc: Move deprecation warning disabling to files including the table
lavc: Disable deprectation warnings coming from options table
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '832129431fd5c693b12c32a1563944c631feaf36':
lavu: Add version information for av_version_info()
Conflicts:
doc/APIchanges
libavutil/version.h
Merged-by: Michael Niedermayer <michaelni@gmx.at>
This commit resets any bands marked as M/S or IS upon encoding a frame.
This is needed because the arrays may contain some residual information
upon allocation on startup and because there isn't any mechanism to
reset the arrays once the frame has been encoded.
Reviewed-by: Claudio Freire <klaussfreire@gmail.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
There were some mistakes in the code for M/S stereo, this commit fixes them.
The start variable was not being reset for every window and every access to
the coefficients was incorrect as well. This fixes that by properly
addressing the coefficients using both windows and setting the start on every window to zero.
Reviewed-by: Claudio Freire <klaussfreire@gmail.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
This commit modifies 02dbed6 to use band->active_lines to better gauge how much information is contained within a single band and thus allow the perceptual noise subsitution to more accurately determine which bands to code as noise. The spread[w+g] used before this patch behaved more like a low-pass filter for PNS band_types, which could mistakingly mark some low frequency bands as noise.
Reviewed-by: Claudio Freire <klaussfreire@gmail.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* commit '80f955c90867561dcce769216bc497e13281eb38':
vda: Check the correct pointer for buffer allocation
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '76d4c62734fbb8a9f497712812f30ff5c27e787f':
webp: Make sure enough bytes are available
Conflicts:
libavcodec/webp.c
See: 0762152f7a
Merged-by: Michael Niedermayer <michaelni@gmx.at>
The loop always needs at least 8 bytes for chunk_type and chunk_size.
If fewer are left, bytestream2_get_le32 just returns 0 without
reading any bytes, leading to an infinite loop.
Signed-off-by: Andreas Cadhalpun <Andreas.Cadhalpun@googlemail.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* commit '016cac75c6061a1c03f812ddf258b8baefe70b00':
asfdec: prevent the infinite loop in detect unknown_subobject
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '9752d2e6cc9b9e8070ec515db8ed8374683d0856':
asfdec: prevent possible memory leak in the asf_read_metadata_obj
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '1316df7aa98c4784f190d107206d0bb12c590b89':
lavu: add an API function to return the Libav version string
Conflicts:
.gitignore
Makefile
cmdutils.c
doc/APIchanges
libavutil/avutil.h
libavutil/utils.c
See: f91126643a
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Every chunk needs at least 8 bytes for chunk_type and chunk_size.
Prevent a possible infinite loop.
CC: libav-stable@libav.org
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
They are used by dnxhd and mpegvideo_enc exclusively, move them to codec
private options instead.
Signed-off-by: Vittorio Giovara <vittorio.giovara@gmail.com>
This returns something like "v12_dev0-1332-g333a27c". This is much more
useful than the individual library versions, of which there are too
many, and which are very hard to map back to releases or git commits.
Signed-off-by: Janne Grunau <janne-libav@jannau.net>
More than 32 bits can't be stored in an integer and get_bits should not
be used with more than 25 bits.
Reviewed-by: Paul B Mahol <onemda@gmail.com>
Signed-off-by: Andreas Cadhalpun <Andreas.Cadhalpun@googlemail.com>
Now ff_qsv_init_internal_session() is able
to find appropriate display handle under linux using VAAPI.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
This avoids empty streams from being selected if a equivalent non empty one is available
The new system is also clearer and more systematic
This may need finetuning, which should be easy to do ...
Fixes Ticket2687
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
This also simplifies the code
Fixes: signal_sigabrt_7ffff6ac8cc9_2943_cov_3588637614_mss2_speech.wmv
Found-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'f91fe24e9bd6912c29bbb03d8afe878e045f9721':
g2meet: force simple idct for identical results over all fate configs
Conflicts:
tests/ref/fate/g2m3
tests/ref/fate/g2m4
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '9eec23b8a7fd0f91827bbc3ed0792c39a8cc9a8a':
g2meet: use av_ceil_log2 instead of a custom function
Merged-by: Michael Niedermayer <michaelni@gmx.at>
This patch adds MSA (MIPS-SIMD-Arch) optimizations for mpegvideo functions in new file mpegvideo_msa.c
Signed-off-by: Shivraj Patil <shivraj.patil@imgtec.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
This returns something like "N-73264-gb54ac84". This is much more useful
than the individual library versions, of which there are too much and
which are very hard to map back to releases or git commits.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'a1e2caa93e4f8102666a21222f01b74838b6497f':
mov: Log format rather than fourcc in stsd in trace mode
Conflicts:
libavformat/mov.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '2eef75fd7e1ac96ab9ca63bb4523078c908bc9b1':
mov: Adjust variable types to fix format warnings
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '3f872c9bfa8ee1032058cfa48068b5a73ef27b5e':
lavc: Add missing API guard to dtg_active_format option
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '4d1229dabf7a7e3b6a7b326afd79102256c3b008':
g2meet: Add FATE tests for all three G2M variants
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Fixes out of array access
Fixes: signal_sigsegv_3670fc0_2818_cov_2307326154_moon.mux
Found-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Fix warning from clang "absolute value function 'abs' given an argument
of type 'long long' but has parameter of type 'int' which may cause
truncation of value [-Wabsolute-value]".
ELS and ePIC decoder courtesy of Maxim Poliakovski,
cleanup and integration by Diego Biurrun.
Signed-off-by: Diego Biurrun <diego@biurrun.de>
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
If threading is used, the first (thread_count - 1) packets are read
before any frame/error is returned. Counting this as successful decoding
is wrong, because it also happens when no single frame could be decoded.
Reviewed-by: Michael Niedermayer <michaelni@gmx.at>
Signed-off-by: Andreas Cadhalpun <Andreas.Cadhalpun@googlemail.com>
* commit '271ce76d317c5432e151216cf23f12b77ed6cb7e':
h264: Parse registered data SEI message and AFD value
Conflicts:
libavcodec/h264.c
libavcodec/h264.h
libavcodec/h264_sei.c
libavcodec/version.h
See: d6e9566949
See: 22291c372f
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Most of the fate-dds-* and fate-txd-* tests already
output into the same pixel format regardless of
platform endianness, so there's no need to force
conversion to another format.
This fixes the tests fate-txd-16bpp, fate-txd-odd,
fate-dds-rgb16, fate-dds-rgb24 and fate-dds-xrgb on
big endian, where the tests seem to fail due to issues
with certain conversion codepaths in swscale.
Those conversion codepaths should of course be fixed, but
the individual decoder tests should use as little extra
conversion steps as possible.
Signed-off-by: Martin Storsjö <martin@martin.st>
* commit 'e95c7a61852cc5b9ce5445ff034b87553e61958a':
mov: Preserve the metadata even when bit-exactness is requested
Conflicts:
libavformat/movenc.c
tests/ref/vsynth/vsynth1-mpeg4
tests/ref/vsynth/vsynth2-mpeg4
See: a17ee4117d
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '3e3056f2a020dd77efdf379dbd4c06a65b4a499a':
h264: Allow stream and container cropping at the same time
Conflicts:
libavcodec/h264_slice.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
The container cropping is applied only when difference is within 16
pixels, and the smallest value between the two is chosen.
Bug-Id: 383
Signed-off-by: Vittorio Giovara <vittorio.giovara@gmail.com>
* commit '3ad678a85b96fc5fecd60e3d3a31ca5ffc89d67f':
fate: Update ac3 test to the new request_channel_layout option
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Fixes out of array access
Fixes: asan_heap-oob_4d5bb0_682_cov_3124593265_Fraunhofer__a_driving_force_in_innovation__small.mp4
Found-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Fixes out of array access
Fixes: asan_heap-oob_7f875d_3482_cov_1818465256_ssudec.mov
Found-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
the max value of the lookup in expanded form is:
(((1 << 7) - 1) << 1) - 65 + 1 + 64 = 254
add one entry of padding to inv_map_table[] to prevent out of bounds
access with non-conforming / fuzzed bitstreams
Signed-off-by: James Zern <jzern@google.com>
Reviewed-by: "Ronald S. Bultje" <rsbultje@gmail.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* commit '1b4c468477f3b8d372da8ef4e5405539ad9c1501':
riff: Validate the wav header size before trying to parse it
Conflicts:
libavformat/riffdec.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Fixes inconsistency and out of array access
Fixes: asan_heap-oob_17301a3_2100_cov_3226131691_ff_add_pixels_clamped_mmx.m2ts
Found-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Fixes out of array access
Fixes: asan_heap-oob_1dd60fd_267_cov_2954683513_5baad44ca4702949724234e35c5bb341.jpg
Found-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Previously these chunks where parsed again for each frame with threads
but not without leading to a different path and the potential for
inconsistencies
This also removes a related special case from decode_ihdr_chunk()
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Multiple IHDR chunks are forbidden in PNG
Fixes inconsistency and out of array accesses
Fixes: asan_heap-oob_4d5c5a_1738_cov_2638287726_c-m2-8f2b481b7fd9bd745e620b7c01a18df2.png
Found-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* cehoyos/master:
lavf/msnwc: Return 0 if the probe function does not detect msnwc-tcp.
lavf/mpegts: Return 0 if the probe function does not detect mpegts.
lavf/img2dec: Improve detection of valid Quickdraw images.
lavf/asfdec: Reduce minimum header size.
Changelog: Add jpeg 2000 improvements before they get forgotten.
lavf/img2dec: Autodetect dds frames.
Conflicts:
libavformat/version.h
Merged-by: Michael Niedermayer <michaelni@gmx.at>
This commit adds support for the coding of intensity stereo scalefactor indices.
It does not do any marking of such bands and as such does no functional changes
to the encoder. It removes any old twoloop specific code for PNS and moves it
into a seperate function which handles setting of scalefactor indices for
PNS and IS bands.
Reviewed-by: Claudio Freire <klaussfreire@gmail.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
This was suggested in the discussion about these functions
With this change the functions are available internally but are not
part of the public API
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
This patch adds MSA (MIPS-SIMD-Arch) optimizations for pixblock functions in new file pixblockdsp_msa.c
Adds new generic macros (needed for this patch) in libavutil/mips/generic_macros_msa.h
Signed-off-by: Shivraj Patil <shivraj.patil@imgtec.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
This commit adds support for both PNS and IS (intensity stereo) codebooks to the
encode_window_bands_info() quantizer, used by the faast, faac and anmr non-default,
native coders. This does not mean that both extensions now work with those coders,
some are simply unsuited and will trigger an assertion in the encoder while
others simply ignore the changed scalefactor indices and band types.
This commit simply adds support for encoding said band types with the alternative
coders. Future commits to the coders will be required to make them suitable.
Reviewed-by: Claudio Freire <klaussfreire@gmail.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
This commit extends the trellis quantizer (used by the default twoloop coder)
to accept and correctly encode codebooks needed for intensity stereo and perceptual noise substitution.
Reviewed-by: Claudio Freire <klaussfreire@gmail.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
This commit adds the energy spread to the struct for each band and removes 2 unused fields.
distortion and perceptual_weight were not referenced in any file nor were they set to any value,
so it was safe to remove them. The energy spread is currently only used in the aac psy model.
It's defined as being proportional to the tonality of each band.
Reviewed-by: Claudio Freire <klaussfreire@gmail.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'b08569a23948db107e5e6175cd4c695427d5339d':
lavf: Replace the ASF demuxer
Conflicts:
Changelog
libavformat/asf.h
libavformat/asfdec.c
libavformat/version.h
tests/ref/fate/wmv8-drm-nodec
tests/ref/seek/lavf-asf
The rewritten demuxer is placed in a new file, the current demuxer is
left as default. Carl has tested both and the one working better is
default.
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '441e8ae5efd681055e5af6f4317fb60110de9dd0':
FATE: drop the last truncated frame from the wmapro tests
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'd3ea79e8a65ddad4da11813bb43c46701295f68c':
FATE: drop the last truncated frame from the wma lossless test
Conflicts:
tests/fate/lossless-audio.mak
Merged-by: Michael Niedermayer <michaelni@gmx.at>
The old one is the result of the reverse engineering and guesswork.
The new one has been written following the now-available specification.
This work is part of Outreach Program for Women Summer 2014 activities
for the Libav project.
The fate references had to be changed because the old demuxer truncates
the last frame in some cases, the new one handles it properly.
The seek-test reference is changed because seeking works differently
in the new demuxer. When seeking, the packet is not read from the stream
directly, but it is rather constructed by the demuxer. That is why
position is -1 now in the reference.
Signed-off-by: Anton Khirnov <anton@khirnov.net>
This commit adds additional fields which are used by the native encoder to add intensity stereo support. It also adds some clarifying statements to the comments for the codebooks.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* commit '5ec0bdf2c524224f30ba4786f47324970aed4aaa':
h264: do not update the context fields copied between threads after finish_setup()
Conflicts:
libavcodec/h264.h
libavcodec/h264_slice.c
See: f111831ed6 and others
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '6d4d3fee63c46d921c4870feab79269af94e84e1':
h264: make sure the current picture is not made a long ref multiple times
See: 34ea5f418e
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '9a5e4fbec870c7d466b7a0aec92c70778efc96b5':
avconv: do not stop processing the input packet on decoding error
Conflicts:
ffmpeg.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'b114f6d48a06a4dad6882bc83e07463905f004c4':
avconv: factor out flushing the filters
Conflicts:
ffmpeg.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Otherwise sm_size can be larger than size, which results in a negative
packet size.
Reviewed-by: Michael Niedermayer <michaelni@gmx.at>
Signed-off-by: Andreas Cadhalpun <Andreas.Cadhalpun@googlemail.com>
* commit 'e49e0f58e273237f83b4486f3536931ed1943d18':
h264: make sure the slices do not overlap during slice threading
Conflicts:
libavcodec/h264.h
libavcodec/h264_slice.c
See: 43b434210e
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Any other x265 symbol may not exported, e.g. if the build is a
multilib (10-bit and 8-bit in one) build.
This is the only symbol we directly call, and is available in the
build number we check for.
Fixes the configure check on multilib x265 builds.
Signed-off-by: Derek Buitenhuis <derek.buitenhuis@gmail.com>
Any other x265 symbol may not exported, e.g. if the build is a
multilib (10-bit and 8-bit in one) build.
This is the only symbol we directly call, and is available in the
build number we check for.
Fixes the configure check on multilib x265 builds.
Signed-off-by: Derek Buitenhuis <derek.buitenhuis@gmail.com>
This HWAccel isn't really usable right now due to an nvidia driver bug,
so we don't want it selected by default.
HWAccels have a capabilities field and there's a comment about flags,
but no flags exist today, so let's add one for experimental hwaccels.
The intention of this change is to allow separation of API tests from the
existing tests, and also to have a place for the API test source/executable
files so they're not mixed in with the actual library code.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* commit '92fdc80cab2acad9f171ba38a08aa89b392bdadd':
nvenc: Fix NV12 input
Conflicts:
libavcodec/nvenc.c
Not merged, the changed code is not in FFmpeg
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '072756cdd2f949462520041e357f52f15d8c274d':
vc1dec: use get_bits_long and limit the read bits to 32
See: 1f1e0a2971
Merged-by: Michael Niedermayer <michaelni@gmx.at>
If nb_samples is zero, the bit_rate calculation results in a division by
zero.
Since ff_get_buffer fails if frame->nb_samples is zero, this can be
fixed by moving the bit_rate calculation after that function call.
That also makes it possible to reuse the already calculated
frame->nb_samples value.
Reviewed-by: Michael Niedermayer <michaelni@gmx.at>
Signed-off-by: Andreas Cadhalpun <Andreas.Cadhalpun@googlemail.com>
This fixes a segfault when decoding multi-channel MP3onMP4 files.
This is similar to commit cb72230d for MPADSPContext.
Reviewed-by: Michael Niedermayer <michaelni@gmx.at>
Signed-off-by: Andreas Cadhalpun <Andreas.Cadhalpun@googlemail.com>
Thats what the spec says should be done
aka iterate in the wrong space and use special cases to patch that up.
It sometimes can result in different order
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
This change introduces basic support for HEVC decoding through vdpau.
Right now, there are problems with the nvidia driver/library implementation
that mean that frames are incorrectly laid out in memory when they are
returned from the decoder, and it is normally impossible to recover the
complete decoded frame due to loss of data from alignment inconsistencies.
I obviously hope that nvidia will be fixing it in due course - I've verified
the problems exist with their example application.
As such, this support is not useful for any real world application, but I
believe that it is correct (with the caveat that the mangled frames may hide
problems) and will work properly once the nvidia problem is fixed.
Right now it appears that any file encoded by x265 or nvenc is decoded
correctly, but that's because these files don't use a bunch of HEVC
features.
Quick summary:
Features that seem to work:
1) Short Term References
2) Scaling Lists
3) Tiling
Features with known problems:
1) Long Term References
It's hard to tell what's going on here. After I read the nvidia example
app that does not set the IsLongTerm flag on LTRs, and changed my code,
a bunch of frames using LTR started to display correctly, but there
are still samples with glitches that are related to LTRs.
In terms of real world files, both x265 and nvenc only use short term
refs from this list. The divx encoder seems similar.
Signed-off-by: Philip Langdale <philipl@overt.org>
This also reduces the amount of memory needed
Fixes Ticket4672
The new code seems slightly faster as well, probably due to better cache usage
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Cross-compile toolchains without support for ranlib -D would fail.
This fixes the configure script to test the cross ranlib rather than the native ranlib.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Electronic Arts VP6 files may contain two video streams: one for the
primary video stream and another for the alpha mask. The file format
uses identical data structures for both streams.
Signed-off-by: Peter Ross <pross@xvid.org>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Result differs in pkt_duration and time_base.den for some reason.
Right now it tests only one example (adjusted to match the output).
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Drop unneeded var and avoid checking for NULL twice as
ffurl_closep() already does this.
Signed-off-by: Reynaldo H. Verdejo Pinochet <reynaldo@osg.samsung.com>
* commit '5dbd491eb38efab1d1313d4129ed76ab2e98176d':
TextureDSP: fix erroneous condition which produced blocky output for DXT
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Like the 5/3 case this is needed to avoid overflows and similarly for 16bpp
output pure 32bit operations are insufficient if high quality is wanted
Note, this code-path is only used in bitexact mode, so this should not
affect the speed of any real use-case
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'a88e21f5b78ef5e75b073ecbfd4e92921002a703':
Fix missing symbols when libvpx has only vp8 enabled
Not merged, the FFmpeg libvpx-vp8 encoder does not use anything from libvpx.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
The code is simply broken, the read packets are not aligned to
the mp3 frames, the file end or the id3 tag thus this simply
cannot reliably find the ID3v1 tag to remove it
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Ideally this should be discarded by the demuxer but this is not
possible without fully parsing which would be then very similar
to this. The current ID3v1 discard code in the demuxer does not work
and will be removed in a subsequent commit
The discard code could be adjusted if needed to also discard tags at
other locations than the end or to limit this possibly to input
from the mp3 demuxer or even to move the discarding to the
decoder.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Use new H264Ref.reference field to track field picture flags. The
H264Picture.reference flag in DPB is now irrelevant here.
This is a regression from git commit d8151a7, and that affected
multiple interlaced video streams.
Signed-off-by: Gwenole Beauchesne <gwenole.beauchesne@intel.com>
The pixel buffer base address is never unlocked this causes
a bug with some pixel format types that are produced natively
by the hardware decoder: the first buffer was always used.
Unlock the pixel buffer base address fixes the issue.
This should avoid problems on systems with little stack space and fix some crashes
in fate
crash found-by: jamrial
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'c0b105756f61d253bdabcc2bb49453a2557e7c3b':
txd: Use the TextureDSP module for decoding
Conflicts:
configure
libavcodec/s3tc.c
libavcodec/s3tc.h
libavcodec/txd.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
This patch adds MSA (MIPS-SIMD-Arch) optimizations for block functions in new file blockdsp_msa.c
Signed-off-by: Shivraj Patil <shivraj.patil@imgtec.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Using the internal DXTC routines brings support for non multiple of 4
textures. A new test is added to cover this feature. Hashes differ
since the decoding algorithm is different, though no visual changes
have been spotted.
Signed-off-by: Vittorio Giovara <vittorio.giovara@gmail.com>
This module implements generic texture decompression from different
families (DXTC, RGTC, BCn) and texture compression DXTC 1, 3, and 5.
Signed-off-by: Vittorio Giovara <vittorio.giovara@gmail.com>
This reduces the number of operations
Its not done for 9/7i as that would overflow thanks to JPEG2000 allowing
32 decomposition levels
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
thats how the specification defines it, this also improves numerical
accuracy of the integer wavelet implementation. It otherwise should
be equivalent, in case of overflows this can be reverted.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* commit '8655c54160767de1a6b96f8bc310d6e4eaceff48':
libvpx: Support the vp9 extended profiles
Conflicts:
Changelog
configure
libavcodec/libvpx.c
libavcodec/libvpx.h
libavcodec/libvpxdec.c
libavcodec/libvpxenc.c
libavcodec/version.h
mostly not merged, as requested by jamrial
See: 01e59d48ed
See: 079b7f6eac and others
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '05bf3f54e6078716f6267df530bf1d474ca3d606':
libvpx: Do not set vp8 only parameters when encoding in vp9
Conflicts:
libavcodec/libvpxenc.c
See: 238ec505e2
See: ae330070ee
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'c060d046aa2f89c0e601a2dcfbce53f0e36cf498':
af_resample: Set the number of samples in the last frame
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '6ec688e1bc76dd93151cbca1c340162ae4b10d77':
mp3: enable packed main_data decoding in MP4
Conflicts:
libavcodec/mpegaudiodec_template.c
Only the parts needed to support the available sample are merged
the remaining error checks are left in place
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Even if the jpeg2000 spec uses a wrong value this does not
make mathematics work this way, also this has been corrected in the 2004
version AFAIK
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
or if no rematrix and no resampling is performed and the input is 16bit
note reampling and rematrix itself always use more than 16bit internally
the "internal" sampling format is the format between these steps
Its unlikely the difference from this commit is audible in any case
unless there is some bug either before or after the change.
but multiple people prefer this and it slightly improves the precission
of computations.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Bump the minimum libvpx version to 1.3.0 and rework the configure logic
to fail only if no decoders and encoders are found.
Based on the original patch from Vittorio.
Signed-off-by: Vittorio Giovara <vittorio.giovara@gmail.com>
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
This is almost certainly closer to how the actual Nintendo players work,
and fixes some output pops in files with blank ADPC/SEEK tables (like
those from brawlcustommusic).
the vp9 bitstream supports 8 values:
unknown (default), bt601, bt709, smpte170, smpte240, bt2020, reserved
and sRGB.
Reviewed-by: Ronald S. Bultje <rsbultje@gmail.com>
Signed-off-by: James Zern <jzern@google.com>
The condition is impossible now.
the TPsot type is changed to unsigned int to prevent gcc from producing warnings
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
14496-3 suggests packing main_data of MP3 that is usually scattered
into multiple frames due to bit reservoir.
However, after packing main_data into a access unit, bitrate index
in the MPEG audio frame header doesn't match with actual frame size.
In order to accept this, this patch removes unnecessary frame size
checking on mp3 decoder.
Also, mov demuxer was changed to use MP3 parser only on special cases
(QT MOV with specific sample description) to avoid re-packetizing.
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
This patch adds MSA (MIPS-SIMD-Arch) optimizations for hpel functions in new file hpeldsp_msa.c
Adds new generic macros (needed for this patch) in libavutil/mips/generic_macros_msa.h
Signed-off-by: Shivraj Patil <shivraj.patil@imgtec.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
QP_store is only 8-bit-aligned, so accessing it as uint32_t causes
SIGBUS crashes on sparc.
The AV_RN32/AV_WN32 macros only do unaligned access in the
HAVE_FAST_UNALIGNED case.
Reviewed-by: Michael Niedermayer <michaelni@gmx.at>
Signed-off-by: Andreas Cadhalpun <Andreas.Cadhalpun@googlemail.com>
The APIC description must be unique, and some ID3v2 tag writers add
spaces to write several APIC entries with the same description. The
trailing spaces simply serve as a way to disambiguate the description.
Do this so that API users do not have to special-case mp3 to fix this
cosmetic issue.
Requested-by: wm4
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
This patch adds MSA (MIPS-SIMD-Arch) optimizations for qpel functions in new file qpeldsp_msa.c
Adds new generic macros (needed for this patch) in libavutil/mips/generic_macros_msa.h
Signed-off-by: Shivraj Patil <shivraj.patil@imgtec.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
This is needed to separate the end padding from the bitstream, allowing
to end it multiple times without disturbing it.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
WebPMemoryWriterClear() must be used instead of free() when
libwebp ABI version is > 0x0203.
Signed-off-by: James Almer <jamrial@gmail.com>
Signed-off-by: Vittorio Giovara <vittorio.giovara@gmail.com>
This patch adds MSA (MIPS-SIMD-Arch) optimizations for H263 lpf functions in new file h263dsp_msa.c
Signed-off-by: Shivraj Patil <shivraj.patil@imgtec.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Calling ffio_ensure_seekback() if ffio_init_checksum() has been called
on the same context can lead to out of bounds memory accesses and
crashes. The reason is that ffio_ensure_seekback() does not update
checksum_ptr after reallocating the buffer, resulting in a dangling
pointer.
This effectively fixes potential crashes when opening mp3 files.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
We are missing the handling of some special cases for this.
These cases should be unused and there should be no reason
to ever use them unless some spec dictates their use
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
The current check is too strict for newer makeinfo versions.
Existing version strings are:
makeinfo (GNU texinfo) 4.13
makeinfo (GNU texinfo) 5.2
texi2any (GNU texinfo) 5.9.93
Probably version 6 will come in the not too far future.
Reviewed-by: Timothy Gu <timothygu99@gmail.com>
Signed-off-by: Andreas Cadhalpun <Andreas.Cadhalpun@googlemail.com>
In the TTA extradata re-construction the values are written with
avio_wl16 and if they don't fit into uint16_t, this triggers an
av_assert2 in avio_w8.
Reviewed-by: Michael Niedermayer <michaelni@gmx.at>
Signed-off-by: Andreas Cadhalpun <Andreas.Cadhalpun@googlemail.com>
And default to 8000 if it is invalid.
An invalid sample rate can trigger av_assert2 in av_rescale_rnd.
Reviewed-by: Michael Niedermayer <michaelni@gmx.at>
Signed-off-by: Andreas Cadhalpun <Andreas.Cadhalpun@googlemail.com>
Fixes ticket #4628.
The problem arose, in the sample file at least, in the last block where the
minimum and maximum Rice partition orders were both 0. In that case, and any
other where pmax == pmin, the original UINT32_MAX placeholder value for
bits[opt_porder] was getting overwritten before the comparison to check if the
current partition order is a new optimal, so the correct partition order and
RiceContext params were not being set.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Added HLS encryption with -hls_key_info_file <key_info_file> option. The
first line of key_info_file specifies the key URI written to the
playlist. The key URL is used to access the encryption key during
playback. The second line specifies the path to the key file used to
obtain the key during the encryption process. The key file is read as a
single packed array of 16 octets in binary format. The optional third
line specifies the initialization vector (IV) as a hexadecimal string to
be used instead of the segment sequence number (default) for encryption.
Changes to key_info_file will result in segment encryption with the new
key/IV and an entry in the playlist for the new key URI/IV.
Key info file format:
<key URI>
<key file path>
<IV> (optional)
Example key URIs:
http://server/file.key
/path/to/file.key
file.key
Example key file paths:
file.key
/path/to/file.key
Example IV:
0123456789ABCDEF0123456789ABCDEF
Example:
ffmpeg -f lavfi -i testsrc -c:v h264 -hls_key_info_file file.keyinfo
foo.m3u8
file.keyinfo:
http://server/file.key
/path/to/file.key
0123456789ABCDEF0123456789ABCDEF
Example shell script:
BASE_URL=${1:-'.'}
openssl rand 16 > file.key
echo $BASE_URL/file.key > file.keyinfo
echo file.key >> file.keyinfo
echo $(openssl rand -hex 16) >> file.keyinfo
ffmpeg -f lavfi -re -i testsrc -c:v h264 -hls_flags delete_segments \
-hls_key_info_file file.keyinfo out.m3u8
--
Signed-off-by: Christian Suloway <csuloway@globaleagleent.com>
Signed-off-by: Dan Dennedy <dan@dennedy.org>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'a4fbd55d6e03eabdbecc3b7892ec09eb8062d066':
h264: er: Copy from the previous reference only if compatible
See: fdc64a1044
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '9af7e8045e3e63ab39adedae9a7c11b1c410af26':
lavc: Clarify the behaviour of dimension and format context fields
Conflicts:
libavcodec/avcodec.h
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '03ca6d70df192125a772dadd01acfe3905aa653f':
x264: Factor out the reconfiguration code
Conflicts:
libavcodec/libx264.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
This is more robust.
And only check if there is actually a frame returned.
Reviewed-by: Michael Niedermayer <michaelni@gmx.at>
Signed-off-by: Andreas Cadhalpun <Andreas.Cadhalpun@googlemail.com>
Also use the frame pixel format instead of the one from the codec
context, which is more robust.
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
Reviewed-by: Michael Niedermayer <michaelni@gmx.at>
Signed-off-by: Andreas Cadhalpun <Andreas.Cadhalpun@googlemail.com>
Also use the frame pixel format instead of the one from the codec
context, which is more robust.
Signed-off-by: Andreas Cadhalpun <Andreas.Cadhalpun@googlemail.com>
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
The AVCodecContext width, height, coded_width, coded_height and format
are used mainly as decoding hints and they get internally overwritten
during the data parsing stage.
Do not assume they match the last AVFrame provided by
avcodec_decode_video2 and assimilated functions since multi-threading
and other frame reordering might make those values to refer to frames
that will be outputted in the future.
CC: libav-stable@libav.org
* commit '74ea1167d91ccb2e1f2943efa030f2c278b598be':
tls_gnutls: fix hang on disconnection
See: 2222f419da
Merged-by: Michael Niedermayer <michaelni@gmx.at>
GNUTLS_SHUT_RDWR means GnuTLS will keep waiting for the server's
termination reply. But since we don't shutdown the TCP connection at
this point yet, GnuTLS will just keep skipping actual data from the
server, which basically is perceived as hang.
Use GNUTLS_SHUT_WR instead, which doesn't have this problem.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
GNUTLS_SHUT_RDWR means GnuTLS will keep waiting for the server's
termination reply. But since we don't shutdown the TCP connection at
this point yet, GnuTLS will just keep skipping actual data from the
server, which basically is perceived as hang.
Use GNUTLS_SHUT_WR instead, which doesn't have this problem.
Signed-off-by: Martin Storsjö <martin@martin.st>
Neccessary -> Necessary
formated -> formatted
thee -> the
eventhough -> even though
seperately -> separately
Reviewed-by: Michael Niedermayer <michaelni@gmx.at>
Signed-off-by: Andreas Cadhalpun <Andreas.Cadhalpun@googlemail.com>
Today, we track the short term RPS size for DXVA, but only if the
SliceHeader RPS is being used. Otherwise it's left uninitialized.
NVIDIA's VDPAU implementation requires that the size be accurately
tracked even if an SPS RPS is being used. In this case, it's really
counting the size of the RPS idx information, but you end up with
mangled output if the value is not accurate.
VDPAU also needs the size of the long term RPS.
Signed-off-by: Philip Langdale <philipl@overt.org>
Removes a defined but not used warning on files including softfloat.h
Reviewed-by: Michael Niedermayer <michaelni@gmx.at>
Signed-off-by: James Almer <jamrial@gmail.com>
Theres currently no case where this could be triggered
Found-by: Daemon404
Reviewed-by: Nicolas George <george@nsup.org>
Reviewed-by: Paul B Mahol <onemda@gmail.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
This reverts commit 04f0002, which made it impossible to enable VSX with
a generic cpu.
This changes the behavior back to what it was before commit b0af404.
Reviewed-by: Michael Niedermayer <michaelni@gmx.at>
Signed-off-by: Andreas Cadhalpun <Andreas.Cadhalpun@googlemail.com>
This patch adds MSA (MIPS-SIMD-Arch) optimizations for AVC qpel functions in new file h264qpel_msa.c
Adds new generic macros (needed for this patch) in libavutil/mips/generic_macros_msa.h
Added const to local static array.
Signed-off-by: Shivraj Patil <shivraj.patil@imgtec.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
This is what FFmpeg / FFplay do and it is more robust
Reviewed-by: Stefano Sabatini <stefasab@gmail.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
If we do check av_pix_fmt_desc_get() then we should fail and
not continue with an invalid pix_fmt
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'a7ac1a7b94447f33ae95be4d6d186e2775977f91':
flv: Name an enum and use its type
Conflicts:
libavformat/flvdec.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Inconsistencies between the dimensions/pixel format of avctx and the
frame can confuse API users.
For example this can crash the demuxing_decoding example.
Back up the previous values and restore them, when decoding the next
frame. This is necessary, because these can be different between the
returned frame and the last decoded frame.
Reviewed-by: Michael Niedermayer <michaelni@gmx.at>
Signed-off-by: Andreas Cadhalpun <Andreas.Cadhalpun@googlemail.com>
* commit 'e7af52a68dde9144b273a9598b60bf0f56e1323b':
mpegvideo: rv10: Move function declaration to a separate header
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'e3d0f49abb20a551bf6d885f75c354d6d0bbeb9d':
mpegvideo: h263: Move all tables to a single file
Conflicts:
libavcodec/h263.h
libavcodec/h263data.h
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '8b5007a31b8d1ddbe3661bf45a732336450b7d25':
mpegvideo: Move ER functions to a separate file
Conflicts:
libavcodec/mpegvideo.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Some files have SeekHead elements with broken IDs. They mismatch with
the ID of the destination element. These files are written by
"IDMmkvlib0.1" (as identified by the MuxingApp and WritingApp elements),
and the SeekHead IDs are actually endian-swapped.
This confuses the SeekHead logic of the demuxer. It will read some
elements twice, because the SeekHead ID is used to identify and remember
already read elements. With the file at hand, the stream list was
duplicated by reading the Tracks element twice.
Fix this by rejecting invalid EBML IDs in SeekHead entries. (This fix is
relatively specific to the broken file at hand, and doesn't protect
against some other cases of broken SeekHead, such as valid but
mismatching target element IDs.)
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Fixes clang warning "absolute value function 'fabsf' given an argument
of type 'double' but has parameter of type 'float' which may cause
truncation of value [-Wabsolute-value]".
Having this macro in an header only facilitates the use of such header.
The code increase is minimal and files have one less dependency
on mpegvideo.h.
These 2 are highly related so they are in the same commit
Fixes part of Ticket4605
Fixes p0_04.j2k
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
This is implemented but i suspect does not work correctly as no file using this
seems to decode correctly.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
This works with one of 2 RLCP samples i have, the other appears to also
use selective arithemtic coding bypass which may or may not be the reason why it does
not work
Sample: p0_16.j2k
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
This patch adds MSA (MIPS-SIMD-Arch) optimizations for AVC idct functions in new file h264idct_msa.c
Adds new generic macros (needed for this patch) in libavutil/mips/generic_macros_msa.h
Signed-off-by: Shivraj Patil <shivraj.patil@imgtec.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
This patch adds MSA (MIPS-SIMD-Arch) optimizations for AVC intra prediction functions in new file h264pred_msa.c
Adds new generic macros (needed for this patch) in libavutil/mips/generic_macros_msa.h
Signed-off-by: Shivraj Patil <shivraj.patil@imgtec.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
There is no support for non integer sample rates, using doubles/floats currently could
only lead to rounding differences between platforms
Previous version Reviewed-by: Mark Harris <mark.hsj@gmail.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
s patch adds MSA (MIPS-SIMD-Arch) optimizations for AVC chroma mc functions in new file h264chroma_msa.c
Adds new generic macros (needed for this patch) in libavutil/mips/generic_macros_msa.h
Signed-off-by: Shivraj Patil <shivraj.patil@imgtec.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Make the logic in libavformat/hevc.c parse_rps align with libavcodec/hevc_ps.c ff_hevc_decode_short_term_rps
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
This is required for the (not yet in git) private stream detection/export,
no other testcase known
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'd1dd0d404c085f4fce7b8358b4aea677761c5d88':
mpegvideo: Move block permutation function where is used
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'c6aa0554b0c3e31fec4580b68ea85b66966cd381':
mpegvideo: Drop release_unused_pictures() function
Conflicts:
libavcodec/mpegvideo.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '7061bf0925a7d6c5899bbe710b2b8cdae9005274':
mpegvideo: Move Picture-related functions to a separate file
Conflicts:
libavcodec/mpegvideo.c
libavcodec/mpegvideo.h
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Send a footer to correctly close client sockets.
This fixes network errors in client applications.
Signed-off-by: Stephan Holljes <klaxa1337@googlemail.com>
Reviewed-by: Nicolas George <george@nsup.org>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
display_matrix_size is only initialized when av_stream_get_side_data()
returns a side data pointer. The code is safe since the only effect this
has is setting the display_matrix pointer to NULL which it was already
anyway.
This patch adds MSA (MIPS-SIMD-Arch) optimizations for HEVC intra predition functions in new file hevcpred_msa.c
Adds new generic macros (needed for this patch) in libavutil/mips/generic_macros_msa.h
Signed-off-by: Shivraj Patil <shivraj.patil@imgtec.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
This patch adds MSA (MIPS-SIMD-Arch) optimizations for HEVC loop filter and sao functions in new file hevc_lpf_sao_msa.c
Adds new generic macros (needed for this patch) in libavutil/mips/generic_macros_msa.h
In this patch, in comparision with previous patch, duplicated c functions are removed.
Signed-off-by: Shivraj Patil <shivraj.patil@imgtec.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
If chan2 is not smaller than the number of channels, it can cause
segmentation faults due to dereferencing a NULL pointer.
Signed-off-by: Andreas Cadhalpun <Andreas.Cadhalpun@googlemail.com>
Reviewed-by: Paul B Mahol <onemda@gmail.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
The AVFrame values are closer to the AVFrame bitmap changed instead of
the AVCodecContext values, so this should be more robust
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Return layout when FF_API_GET_CHANNEL_LAYOUT_COMPAT is set even if the
layout itself is not in the deprecated style.
Signed-off-by: Simon Thelen <ffmpeg-dev@c-14.de>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
The flag was set unintentionally and the code will break if a NULL
packet is passed in.
Signed-off-by: Vignesh Venkatasubramanian <vigneshv@google.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'b14086ca38efa1a86cb0f0c6aa147b05f698877b':
mkv: Correctly report the latest packet had been flushed
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'b380337020e271c5431aa8ef8f8e9dfda5e919b2':
mpjpegdec: don't try to alloc an AVIOContext when probe is guaranteed to fail
See: 1382add59d
Merged-by: Michael Niedermayer <michaelni@gmx.at>
The first check is done without the AVIOContext, so alloc it only if said check succeeds
Signed-off-by: James Almer <jamrial@gmail.com>
Signed-off-by: Janne Grunau <janne-libav@jannau.net>
If one of the dimensions is larger than 8176, s->mb_width or
s->mb_height is larger than 511, leading to an int16_t overflow of
s->mv_max.{x,y}. This then causes av_clip to be called with amin > amax.
Changing the type to int avoids the overflow and has no negative
effect, because s->mv_max is only used in clamp_mv for clipping.
Since mv_max.{x,y} is positive and mv_min.{x,y} negative, av_clip can't
increase the absolute value. The input to av_clip is an int16_t, and
thus the output fits into int16_t as well.
For additional safety, s->mv_{min,max}.{x,y} are clipped to int16_t range
before use.
Reviewed-by: Ronald S. Bultje <rsbultje@gmail.com>
Signed-off-by: Andreas Cadhalpun <Andreas.Cadhalpun@googlemail.com>
The first check is done without the AVIOContext, so alloc it only if said check succeeds
Reviewed-by: Michael Niedermayer <michaelni@gmx.at>
Signed-off-by: James Almer <jamrial@gmail.com>
* commit 'caf7be30b11288c498fae67be4741bfbf083d977':
mpjpgdec: free AVIOContext leak on early probe fail
Conflicts:
libavformat/mpjpegdec.c
See: 34d278f983, this was mistakenly reimplemented, also see ffmpeg IRC log of today
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Otherwise the check 'tile_size < size' treats a negative size as
unsigned, causing the check to pass. This subsequently leads to
segmentation faults.
This was originally fixed as part of Libav commit 72ca83, so the
original author is one of the following developers:
Anton Khirnov <anton@khirnov.net>
Diego Biurrun <diego@biurrun.de>
Luca Barbato <lu_zero@gentoo.org>
Martin Storsjö <martin@martin.st>
Reviewed-by: Ronald S. Bultje <rsbultje@gmail.com>
Signed-off-by: Andreas Cadhalpun <Andreas.Cadhalpun@googlemail.com>
* commit 'da0c8664b4dc906696803685f7e53ade68594ab8':
mpegvideo: Move various temporary buffers to a separate context
Conflicts:
libavcodec/mpegvideo.c
libavcodec/mpegvideo_enc.c
libavcodec/mpegvideo_motion.c
libavcodec/rv34.c
libavcodec/vc1_mc.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Currently restricted to blending pixels that only contain either
0 or 255 in their alpha components
Signed-off-by: Donny Yang <work@kota.moe>
Reviewed-by: Paul B Mahol <onemda@gmail.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
The spec specifies the dispose operation as how the current (i.e., currently
being rendered) frame should be disposed when the next frame is blended onto it
This is contrary to ffmpeg's current behaviour of interpreting the dispose
operation as how the previous (i.e., already rendered) frame should be disposed
This patch fixes ffmpeg's behaviour to match those of the spec, which involved
a rewrite of the blending function
Signed-off-by: Donny Yang <work@kota.moe>
Reviewed-by: Paul B Mahol <onemda@gmail.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
This can be useful for debugging, or in scenarios where the user
doesn't want to use the system's DNS settings for whatever reason.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
The main ff_alloc_picture() function is made more generic with all the
parameters necessary as arguments. This will allows to move most of the
related functions to a separate file later.
Right now wrappers are provided to try and minimize the number of
changes in the code.
The C runtime C99 compatibility had been improved a lot and it now
rejects some of the compatibility defines provided for the older
versions.
Many thanks to Ray for the time spent testing.
Bug-Id: 864
CC: libav-stable@libav.org
* commit 'bc76c46943272515805d7ac48ca39f14826d1fed':
aac: Wait to know the channels before allocating frame
Conflicts:
libavcodec/aacdec.c
See: 676a395ab9
Merged-by: Michael Niedermayer <michaelni@gmx.at>
The channel configuration can be delivered only by the PCE,
try to parse it first and not try to decode until a channel
configuration is set.
CC: libav-stable@libav.org
These are defined in ISO/IEC 14496-3:2009/PDAM 4 for 6.1 and 7.1.
It also defines another 7.1 layout with configuration 14, that one
is not added here for now.
11: 3/3.1 FC FL+FR BL+BR BC LFE
12: 3/2/2.1 FC FL+FR SiL+SiR BL+BR LFE
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
FDK AAC encoder outputs SCE(front)+CPE(front)+CPE(back)+CPE(back) on
MODE_7_1_REAR_SURROUND configuration.
Since decoder couldn't properly map 4 back channels, decoding failed
unless -request_channel_layout 0x8000000000000000 has been specified.
Now we treat first CPE(back) as CPE(side) on channel mapping.
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
calc_coefficients is no longer being called every frame
Signed-off-by: Ganesh Ajjanagadde <gajjanagadde@gmail.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
This allows us to offer the same codec name that libav uses. We don't have
a special way to do aliases, so it's all a bit more verbose than you'd want
but such is life.
Signed-off-by: Philip Langdale <philipl@overt.org>
For the sake of compatibility, and because pretty much everything else in the
codebase calls it HEVC.
Signed-off-by: Philip Langdale <philipl@overt.org>
They are unused and colorspace.h is not a installed header
Found-by: Timo Rothenpieler <timo@rothenpieler.org>
Reviewed-by: Clément Bœsch <u@pkh.me>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Various header informations need to be reset when decoding next frame.
Regression since: 95582b5c
Fixes ticket #4597.
Signed-off-by: Paul B Mahol <onemda@gmail.com>
They are inlined wrapper functions inside the time.h header on MinGW-w64, so
neither check_func() or check_func_headers() work with them.
Reviewed-by: Michael Niedermayer <michaelni@gmx.at>
Signed-off-by: James Almer <jamrial@gmail.com>
* cigaes/master:
lavf/http: Add simple autodetection for client HTTP method, based on AVIO_FLAG_READ.
lavf/http: Indent else-clause.
lavf/http: Properly process HTTP header on listen.
lavf/http: Rudimentary error handling for HTTP requests received from clients.
lavf/http: Process HTTP header before sending response.
lavf/http: Document method option.
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Together with the next commit this prevents non-PCM S302M from being selected unless either
it can be decoded or the user selects passthrough/copy
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
The header is not installed currently so the changes should not be in APIChanges
Found-by: Ronald S. Bultje and others
This reverts part of commit 19ed3e35a5.
The function is quite big and trigonometric functions should not really
be used in speed critical code
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
New functions are added to fixed_dsp, so the documentation is changed
accordingly.
Signed-off-by: Nedeljko Babic <nedeljko.babic@imgtec.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Per matroska Block Structure [1], for keyframes 0th bit of the flag
should not be set (unlike SimpleBlocks). For Blocks, keyframes is
inferred by the absence of ReferenceBlock element (as done by
matroskadec). This CL writes the flag correctly and inserts the
ReferenceBlock element for non-keyframes. The timestamp inserted is
that of the immediately preceding frame (which is true for VP8 and VP9
- the only 2 codecs using the matroska block element as of now). It
also considers all non-video frames (audio, subtitles, metadata) to
be keyframes.
[1] http://www.matroska.org/technical/specs/index.html#block_structure
Signed-off-by: Vignesh Venkatasubramanian <vigneshv@google.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
This patch adds MSA (MIPS-SIMD-Arch) optimizations for HEVC idct functions in new file hevc_idct_msa.c
Adds new generic macros (needed for this patch) in libavutil/mips/generic_macros_msa.h
Signed-off-by: Shivraj Patil <shivraj.patil@imgtec.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
This avoids leaks if the user doest call swr_close() after a failed init
Found-by: James Almer <jamrial@gmail.com>
Reviewed-by: James Almer <jamrial@gmail.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Add functions needed for implementation of fixed point aac dec.
Signed-off-by: Nedeljko Babic <nedeljko.babic@imgtec.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
This patch adds MSA (MIPS-SIMD-Arch) optimizations for HEVC uni mc epel functions.
Adds new generic macros (needed for this patch) in libavutil/mips/generic_macros_msa.h
Signed-off-by: Shivraj Patil <shivraj.patil@imgtec.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
This patch adds MSA (MIPS-SIMD-Arch) optimizations for HEVC mc epel functions.
Signed-off-by: Shivraj Patil <shivraj.patil@imgtec.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
This patch adds MSA (MIPS-SIMD-Arch) optimizations for HEVC biw mc functions (qpel as well as epel) in new file hevc_mc_biw_msa.c
Adds new generic macros (needed for this patch) in libavutil/mips/generic_macros_msa.h
Signed-off-by: Shivraj Patil <shivraj.patil@imgtec.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'e97446e600578392549ef6d0191f2020dae7f8bf':
configure: Check for DXVA2_ConfigPictureDecode instead of LPDIRECT3DSURFACE9
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '76eb0950b8d82b1e9617b9c854f091e13bb23131':
configure: Don't run "export $e" for an empty string
Conflicts:
configure
See: d5db4a7c23
Merged-by: Michael Niedermayer <michaelni@gmx.at>
The decoder assigns channels using default channel configuration
for 5.1ch when it parses an ADTS frame header using consecutive
channel ids.
When a PCE comes, it reassigns channels using PCE configuration
using directly the ids provided. They can be arbitrary.
Always use consecutive channel ids to avoid decoding glitches due
spurious reconfigurations due the channel ids mismatch between the
two otherwise-identical channel maps.
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
These are only necessary once/if avconv gets support for this hwaccel.
While that obviously is desireable, we don't have it yet, and they
currently only are a distraction.
Signed-off-by: Martin Storsjö <martin@martin.st>
This patch adds MSA (MIPS-SIMD-Arch) optimizations for HEVC uniw mc functions (qpel as well as epel) in new file hevc_mc_uniw_msa.c
Adds new generic macros (needed for this patch) in libavutil/mips/generic_macros_msa.h
Signed-off-by: Shivraj Patil <shivraj.patil@imgtec.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
This is the maximum rate possible based on the frame size limit of MXF D-10
Previous version reviewed by tim nicholson <nichot20@yahoo.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
ARGB is not a supported PNG pixel format
Signed-off-by: Donny Yang <work@kota.moe>
Reviewed-by: Paul B Mahol <onemda@gmail.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
If opj_image_create fails to allocate an image it returns NULL, which
causes a segmentation fault at 'img->x0 = 0'.
Reviewed-by: Michael Niedermayer <michaelni@gmx.at>
Signed-off-by: Andreas Cadhalpun <Andreas.Cadhalpun@googlemail.com>
* commit 'fd11465b21ac90bf6964b0c0ca9d6ba64cd3291d':
configure: Use pkg-config for fdk-aac
Conflicts:
configure
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '604abd025dac4cc73a2f6b0c000c3695c16fb000':
configure: Provide an option to override the environment
Conflicts:
configure
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '06db45523c1068c24f049ef2b20fcdead3bf36d8':
configure: Support the extended pkgconf syntax
Conflicts:
configure
Merged-by: Michael Niedermayer <michaelni@gmx.at>
This patch adds MSA (MIPS-SIMD-Arch) optimizations for HEVC bi mc functions (qpel as well as epel) in new file hevc_mc_bi_msa.c
Adds new generic macros (needed for this patch) in libavutil/mips/generic_macros_msa.h
Adds HEVC specific macros (needed for this patch) in libavcodec/mips/hevc_macros_msa.h
Signed-off-by: Shivraj Patil <shivraj.patil@imgtec.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* commit '172b2cee17a3779c114ba065dd7b25dcf61e408f':
dxva2: Add ifdefs around structs that might not be available
Conflicts:
libavcodec/dxva2.c
See: 94d07b314a
Merged-by: Michael Niedermayer <michaelni@gmx.at>
The only need to be listed if they are to be used in ifdefs from
within the code - config items used as dependencies only within
configure don't need to be exported.
Signed-off-by: Martin Storsjö <martin@martin.st>
This fixes dxva2 detection (i.e. correctly realizes that it isn't
available) for WinRT, where dxva2api.h does exist, but these definitions
are omitted (when targeting the API subsets).
Ideally we should rather check for e.g. DXVA2_ConfigPictureDecode,
but configure might fail to find that definition due to _WIN32_WINNT
not being set to the right value during configure. (libavcodec/dxva2.h
manually overrides the _WIN32_WINNT define.)
This allows removing hardcoded --disable-dxva2 from such build
configurations.
Signed-off-by: Martin Storsjö <martin@martin.st>
The option was added in commit d9ae1031f5
but it was never documented. The text is based on the one written by the
commit author for the corresponding AVFormatContext.max_interleave_delta
field.
* commit '28fa58cf5d939151108345d7ddddebbd51d9b684':
dxva2: Fix build when only D3D11 or DXVA2 is used
Conflicts:
libavcodec/dxva2_internal.h
See: 94d07b314a
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '31de41babcd96f8ac2e6632454737aecb3710df7':
configure: Check if ID3D11VideoDecoder exists, not just the header to enable d3d11va
Conflicts:
configure
See: a838b22bd9
Merged-by: Michael Niedermayer <michaelni@gmx.at>
mpz_import and mpz_export were added in GMP 4.1, in 2002.
This simplifies the DH code by clarifying that it only uses pure
bignum functions, no other parts of nettle/hogweed.
Signed-off-by: Martin Storsjö <martin@martin.st>
* commit 'b08caa87c35a768ec0abb16b1e99c3a85f1df28e':
nvenc: H264 and HEVC encoders
Conflicts:
Changelog
configure
libavcodec/Makefile
libavcodec/version.h
This implementation is merged under the name nvenc_b*
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '149fa0b7ac180fe1df48a2e379c560813555bf57':
mpegvideo: Move MotionEstContext and function declarations to a separate header
Conflicts:
libavcodec/mpegvideo.h
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '8e9c39e81fe5ba34010a7ba05cbe4ae31f177d89':
mov: abort on EOF in ff_mov_read_chan
See: a5718863da
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'd68c05380cebf563915412182643a8be04ef890b':
x86: check for AV_CPU_FLAG_AVXSLOW where useful
See: c16e99e3b3
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '7d07ee5a9bd170a06d26fd967cf8de5d3b1ce331':
ppc: cpu: Add support for VSX and POWER8 extensions
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'da60b99a8857d5ca236f32c1799a066e0135a866':
ppc: Restrict some Altivec implementations to Big Endian
Conflicts:
libavcodec/ppc/huffyuvdsp_altivec.c
libavcodec/ppc/me_cmp.c
Not merged, our PPC64LE fate clients passed all tests last time they did run
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'f22ebd2555d15b59e109a5b630dd71374b076d0b':
ppc: configure: Support ISA 2.06 and later
Conflicts:
configure
See: ab12373956 and others
Merged-by: Michael Niedermayer <michaelni@gmx.at>
It's often really helpful to know why a frame wasn't decimated (lo or
hi), and how much you exceeded the threshold by, if you're trying to
tweak the thresholds to get what you want.
mpdecimate already prints a line per input frame with -v debug, this
just makes it longer.
Signed-off-by: Peter Cordes <peter@cordes.ca>
The old logic required an explicit clearing of the lists first and was
prone to overflow the DXVA2 struct in some circumstances.
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
If avio_read fails, the buffer can contain uninitialized data.
This fixes 'Conditional jump or move depends on uninitialised value(s)'
valgrind warnings, and addresses a few memleaks.
Signed-off-by: Andreas Cadhalpun <Andreas.Cadhalpun@googlemail.com>
Signed-off-by: Vittorio Giovara <vittorio.giovara@gmail.com>
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
This fixes the default build on iOS; eventually I should come up with
a better solution for that platform.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
OSX does not know MSG_NOSIGNAL. BSD (which OSX is based on) has got
the socket option SO_NOSIGPIPE (even if modern BSDs also support
MSG_NOSIGNAL).
Signed-off-by: Martin Storsjö <martin@martin.st>
OSX does not know MSG_NOSIGNAL, and provides its own non-standard
mechanism instead. I guess Apple hates standards.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* commit '0181ae9af2de1526464d23209b82e6674d362f5d':
h264: Make sure reinit failures mark the context as not initialized
Conflicts:
libavcodec/h264_slice.c
See: e8714f6f93
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '5ecabd3c54b7c802522dc338838c9a4c2dc42948':
msrle: Use FFABS to determine the frame size in msrle_decode_pal4
Conflicts:
libavcodec/msrledec.c
See: f7e1367f58
Merged-by: Michael Niedermayer <michaelni@gmx.at>
libopenjpeg can return images with components without data.
This fixes segmentation faults.
Reviewed-by: Michael Niedermayer <michaelni@gmx.at>
Signed-off-by: Andreas Cadhalpun <Andreas.Cadhalpun@googlemail.com>
* commit 'b2f0f37d242f1194fe1f886557cf6cefdf98caf6':
rtmpdh: Generate the whole private exponent using av_get_random_seed() with nettle/gmp
Merged-by: Michael Niedermayer <michaelni@gmx.at>
This allows the user to override the directory for the installation
of the pkg-config files (from the default LIBDIR/pkgconfig).
It follows the usual behaviour of Makefiles generated by automake.
Signed-off-by: Ingo Brückl <ib@wupperonline.de>
Reviewed-by: Andreas Cadhalpun <andreas.cadhalpun@googlemail.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Names of functions vector_fmul_window_fixed_c and
vector_fmul_window_fixed_scaled_c are changed by removing "_fixed"
from the name since it is redundant.
Signed-off-by: Nedeljko Babic <nedeljko.babic@imgtec.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
A negative sample duration is invalid according to the spec, but there
are samples that use it for the DTS calculation, e.g.:
http://files.1f0.de/samples/mp4-negative-stts-problem.mp4
These currently get out of A/V sync.
Also change the logging type to AV_LOG_WARNING, because decoding the
sample can continue.
Reviewed-by: Michael Niedermayer <michaelni@gmx.at>
Signed-off-by: Andreas Cadhalpun <Andreas.Cadhalpun@googlemail.com>
Users have no means to find out from a failure how to make it work
or is it preferred to check and print a warning for h264 concat without auto_convert ?
Reviewed-by: Nicolas George <george@nsup.org>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'e9e86d9ef637f5a600c76b352ffe5a82b71b25d1':
rtmpdh: Create sufficiently long private keys for gcrypt/nettle
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '8016a1bd3b60e917e1b12748dd80c06c3462c286':
rtmpdh: Remove an unnecessary check in the gcrypt/nettle dh_compute_key
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '063f7467e4d14ab7fe01b2845dab60cc75df8b53':
rtmpdh: Add fate test for the DH handshake routine
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '0508faaa11bf7507ffdd655aee57c9dc5a8203f4':
rtmpdh: Pass the actual buffer size of the output secret key
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '9f1b3050d9e31e9283d818f3640f3460ac8cfb5b':
rtmpdh: Check the output buffer size in the openssl version of dh_compute_key
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '127d813bcb5705202b7100cf1eccd1e26d72ba14':
rtmpdh: Fix a local variable name in the nettle/gcrypt codepath
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '78efc69e7c990226f4b913721ef1b308ca5bfa04':
rtmpdh: Make sure ret is initialized in the nettle version of bn_hex2bn
Merged-by: Michael Niedermayer <michaelni@gmx.at>
There was a misunderstanding betewen bits and bytes for the parameter
value for generating random big numbers.
Signed-off-by: Martin Storsjö <martin@martin.st>
The old logic required and explicit clearing of the lists first and was
prone to overflow the DXVA2 struct in some circumstances.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* commit '324e50ee95929a9491b855c5e15451145bd5d1ec':
rl: Add a function for freeing dynamically allocated tables.
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'fa1923f18205410a3b0aa6c0e77cb31443ef340d':
mpegvideo: Move ff_*_rl functions to a separate file
Conflicts:
libavcodec/mpegvideo.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '419e3404d07acaac019e8f363c281e17c3a3d622':
mpegvideo: Drop exchange_uv() function and use its code directly
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'd4d90504a687d2c0ef77ccf11d831f24dcff9cf1':
tls_gnutls: Add missing includes for the gcrypt thread safety callbacks
Merged-by: Michael Niedermayer <michaelni@gmx.at>
This patch modifies HEVC mc MIPS-SIMD optimized code according to improved version of generic macros.
Overall, this patch is just upgrading the code with styling changes and will bring it in sync with MIPS-SIMD optimized latest codebase at our end.
Signed-off-by: Shivraj Patil <shivraj.patil@imgtec.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
This was probably broken some time ago. The breakage is now part of the
ABI. For example, we have:
AV_PIX_FMT_XYZ12BE
AV_PIX_FMT_NV16
AV_PIX_FMT_NV20LE
AV_PIX_FMT_NV20LE is wrong. It has the value 113, but as little-endian
format it should be even. This must have been quite obvious when these
formats were added (because of the AV_PIX_FMT_XYZ12BE entry), but
nobody cared or knew about this.
The future libavutil major bump will also break this additionally,
because disabling FF_API_VDPAU will remove an odd number of entries from
the middle of the enum.
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
This patch moves HEVC code of uni mc cases to new file hevc_mc_uni_msa.c.
(There are total 5 sub-modules of HEVC mc functions, if we add all these modules in one single file, its size would be huge (~750k) & difficult to maintain, so splitting it in multiple files)
This patch also adds new HEVC header file libavcodec/mips/hevc_macros_msa.h
Signed-off-by: Shivraj Patil <shivraj.patil@imgtec.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Otherwise it will never be reset, and remain "stuck" in this state
forever. Can happen when seeking: the decoder will receive fragments
from different file positions, which triggers the condition easily.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* cehoyos/master:
lavc/x264: Support bgr0 as input pix_fmt.
lavf: Use av_codec_get_tag2() in avformat_query_codec().
Merged-by: Michael Niedermayer <michaelni@gmx.at>
This patch modifies H264 loopfilter, weighted & bi-weighted prediction MIPS-SIMD optimized code according to improved version of generic macros.
Also there are minor code alignment changes.
Overall, this patch is just upgrading the code with styling changes and will bring it in sync with MIPS-SIMD optimized latest codebase at our end.
Signed-off-by: Shivraj Patil <shivraj.patil@imgtec.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Silences warning(s) like:
libavcodec/x86/fft.asm:93: warning: section flags ignored on
section redeclaration
The cause of this warning is that because `struc` and `endstruc`
attempts to revert to the previous section state [1].
The section state is stored in the macro __SECT__, defined by
x86inc.asm to be `.note.GNU-stack ...`, through the `SECTION`
directive [2].
Thus, the `.note.GNU-stack` section is defined twice
(once in x86inc.asm, once during `endstruc`), causing the warning.
That is the first part of the commit: using the primitive `[section]` format
for .note.GNU-stack etc., which does not update `__SECT__` [2].
That fixes only half of the problem. Even without any `SECTION` directives,
`__SECT__` is predefined as `.text`, which conflicting with the later
`SECTION_TEXT` (which expands to `.text align=16`).
[1]: http://www.nasm.us/doc/nasmdoc6.html#section-6.4
[2]: http://www.nasm.us/doc/nasmdoc6.html#section-6.3
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
This patch includes restructuring of existing macros and addition of more generic macros.
This change was necessary to avoid repeated review comments in remaining patches which we were about to submit.
Also this patch reduces number of code lines due to maximum use of generic macros, allows better code alignment & readability etc.
These modifications in commonly used .libavutil/mips/generic_macros_msa.h. impacts the already accepted code, hence re-submitting it in 2/4,3/4 & 4/4.
Overall, this patch set is just upgrading the code with styling changes and will bring it in sync with MIPS-SIMD optimized latest codebase at our end.
Signed-off-by: Shivraj Patil <shivraj.patil@imgtec.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
This commit silences warning(s) like:
libavcodec/x86/fft.asm:93: warning: section flags ignored on section
redeclaration
The cause of this warning is that because `struc` and `endstruc` attempts to
revert to the previous section state [1]. The section state is stored in the
macro __SECT__, defined by x86inc.asm to be `.note.GNU-stack ...`, through the
`SECTION` directive [2]. Thus, the `.note.GNU-stack` section is defined twice
(once in x86inc.asm, once during `endstruc`), causing the warning.
That is the first part of the commit: using the primitive `[section]` format
for .note.GNU-stack etc., which does not update `__SECT__` [2].
That fixes only half of the problem. Even without any `SECTION` directives,
`__SECT__` is predefined as `.text`, which conflicting with the later
`SECTION_TEXT` (which expands to `.text align=16`).
[1]: http://www.nasm.us/doc/nasmdoc6.html#section-6.4
[2]: http://www.nasm.us/doc/nasmdoc6.html#section-6.3
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
This reverts commit 599888a480.
The commit does not silence the warning on ELF-based systems, and will be
fixed in the subsequent commit.
Conflicts:
libavcodec/x86/fft_mmx.asm
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Move the OpenSSL and GnuTLS implementations to their own files. Other
than the connection code (including options) and some boilerplate, no
code is actually shared.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Apparently it can happen that a mp3 file has junk data between id3 tag
and actual mp3 data. Skip this to avoid outputting nonsense timestamps.
(Two packets had the same timestamps, because the mp3 parser failed to
compute a frame duration.)
In this case, the junk consisted of 1044 bytes of zero, which
incidentally is the same size as normal mp3 frames in this stream. I
suspect the mp3 was edited with some tool which wiped the Xing/LAME
headers. Data near the end of the file suggests it was encoded with
"LAME3.97", but the normal Xing/LAME headers are missing. So this could
be "normal". mpg123 also attempts to skip at least 64KB of junk data by
scanning for headers.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
With bps > 8 more than 255..255 are used
The initialized table content is left unchanged,
But it could also be adjusted for the slight difference of
the maximum
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Move the OpenSSL and GnuTLS implementations to their own files. Other
than the connection code (including options) and some boilerplate, no
code is actually shared.
Signed-off-by: Martin Storsjö <martin@martin.st>
This function allows writing AVRationals as IEEE floats without the need
of platform dependant float operations
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
h264.h and hevc.h are mutually exclusive due to defining some of the same
names. As such, we need to avoid forcing h264.h to be included if we want
hevc decode acceleration to be possible.
However, some of the pre-hwaccel helper functions need h264.h. To avoid
messy collisions, let's move the declaration of all those helpers to
a separate header which we will exclude for the hevc support (which will
be hwaccel-only).
Signed-off-by: Philip Langdale <philipl@overt.org>
In this case the mov demuxer can return a large number of empty packets.
Reviewed-by: Michael Niedermayer <michaelni@gmx.at>
Signed-off-by: Andreas Cadhalpun <Andreas.Cadhalpun@googlemail.com>
shine_encode_buffer expects written to be an int pointer, while the
previous shine_encode_frame expected it to be a long pointer.
Thus encoding with libshine currently always fails with
"internal buffer too small", because a negative return value of
shine_encode_buffer is interpreted as a very large long value.
Reviewed-by: Michael Niedermayer <michaelni@gmx.at>
Signed-off-by: Andreas Cadhalpun <Andreas.Cadhalpun@googlemail.com>
This avoids the need to dereference MpegEncContext->pb if it is
already available outside h263p_encode_umotion()
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
This avoids the need to dereference MpegEncContext->pb if it is
already available outside ff_h263_encode_motion()
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
If avio_read fails, the buffer can contain uninitialized data.
This fixes 'Conditional jump or move depends on uninitialised value(s)'
valgrind warnings.
Signed-off-by: Andreas Cadhalpun <Andreas.Cadhalpun@googlemail.com>
The libwebpmux pkg-config file already has an explicit dependecy on libwebp >= 0.2.0.
Also remove the warning and silently disable the anim encoder when libwebpmux is not new enough.
This is more in line with other library components, like libvpx-vp9
Reviewed-by: Michael Niedermayer <michaelni@gmx.at>
Signed-off-by: James Almer <jamrial@gmail.com>
If it fails, the buffers can be (partially) uninitialized.
This fixes 'Conditional jump or move depends on uninitialised value(s)'
valgrind warnings.
Reviewed-by: Michael Niedermayer <michaelni@gmx.at>
Signed-off-by: Andreas Cadhalpun <Andreas.Cadhalpun@googlemail.com>
WebPAnimEncoder API is a combination of encoder (WebPEncoder) and muxer
(WebPMux). It performs several optimizations to make it more efficient
than the combination of WebPEncode() and native ffmpeg muxer.
When WebPAnimEncoder API is used:
- In the encoder layer: we use WebPAnimEncoderAdd() instead of
WebPEncode().
- The muxer layer: works like a raw muxer.
On the other hand, when WebPAnimEncoder API isn't available, the old code is
used as it is:
- In the codec layer: WebPEncode is used to encode each frame
- In the muxer layer: ffmpeg muxer is used
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* commit '4e17946f10d39eec6cc03fb249ae8147373141b6':
mpegvideo: Rework various functions not to use MpegEncContext directly
Conflicts:
libavcodec/mpegvideo.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'a3f4c930ac3f49f47b6e6ffda925d0dcf80320e2':
mpegvideo: Have ff_mpeg_ref_picture use AVCodecContext directly
Conflicts:
libavcodec/mpegvideo.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'd528045558825f01472e9bee873f60c98d661e53':
mpegvideo: Have ff_mpeg_unref_picture use AVCodecContext directly
Conflicts:
libavcodec/mpegvideo.c
libavcodec/mpegvideo_enc.c
The memset is left in place
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '29216d7fd14d1cec16821867d17c90b5c49e8c07':
tls: fix compilation when both gnutls and openssl are enabled
See: e91fbfd9cf
Merged-by: Michael Niedermayer <michaelni@gmx.at>
This is the 2nd patch in preparation for using WebPAnimEncoder API for encoding
and muxing WebP images.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
This is the 1st patch in preparation for using WebPAnimEncoder API for encoding
and muxing WebP images.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Since the underlying URLContext read functions are used,
they handle interruption, without having to handle it at
this level.
Signed-off-by: Martin Storsjö <martin@martin.st>
This avoids hijacking the fd, by reading using the normal
URLContext functions instead. This allowing reading data that has
been buffered in the underlying URLContext.
This avoids using the libraries own send functions that can
cause SIGPIPE.
The fd is still used for polling the lowlevel socket, for
waiting for retries.
Signed-off-by: Martin Storsjö <martin@martin.st>
* cehoyos/master:
lavc/qdrw: Do not fail decoding valid Quickdraw images.
lavf/mov: Use AVCOL_SPC constants when checking color_space.
lavf/mov: Write colour matrix "6" for color_space bt470bg.
lavf/mkv: Only skip prores header if the packet is large enough.
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '7046bd9bc9ce04521edf453c9b603d84d69c7512':
lavfi: Move avcodec header to the only filter needing it
Conflicts:
libavfilter/avfilter.h
Merged-by: Michael Niedermayer <michaelni@gmx.at>
nut->last_syncpoint_pos doesn't necessarily change between resync
attempts, so find_any_startcode can return the same startcode again.
Thus remember where the last resync happened and don't try to resync
before that.
This can't be done locally in nut_read_packet, because this wouldn't
prevent infinite resync loops, where after the resync a packet is
returned and while reading a following packet the resync happens again.
Reviewed-by: Michael Niedermayer <michaelni@gmx.at>
Signed-off-by: Andreas Cadhalpun <Andreas.Cadhalpun@googlemail.com>
MIPSFPU optimization does't support FATE correctly on Loongson-3.
Signed-off-by: ZhouXiaoyong <zhouxiaoyong@loongson.cn>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Personally, I need the decoder to back out if get_format() returns no
usable pixel format. This didn't work because the error code was not
propagated down the call chain. This in turn happened because the
variable declaration removed in this patch shadowed the variable, whose
value is returned at the end of the function. Consequently, failures of
decode_nal_unit() were ignored in this place.
Reviewed-by: Andreas Cadhalpun <andreas.cadhalpun@googlemail.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Some clients incorrectly set 24 as bits_per_coded_sample, while
the actual value is preserved in one of the codec headers.
In order to work around this, delay the check until decode_frame().
Signed-off-by: Vittorio Giovara <vittorio.giovara@gmail.com>
This significantly reduces the amount of stack space needed and
also permits to simply copy the rice context again without speed
penalty
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Some files benefit by about 0.3% from this, and speedwise its ok
other files do not benefit and encode to the same size
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Without this change, if you link with an 8bit libx265 and try to specify
a 10bit input color space via:
ffmpeg -i in.mov -c:v libx265 -pix_fmt yuv420p10le out.mp4
It will error with:
Incompatible pixel format 'yuv420p10le' for codec 'libx265',
auto-selecting format 'yuv420p'
With this fix, it will learn if a 10bit libx265 is available at startup,
and thus allow 10bit input color spaces.
Reviewed-by: Derek Buitenhuis <derek.buitenhuis@gmail.com>
* rbultje/vp9-bugfixes:
vp9: match another find_ref_mvs() bug in libvpx.
vp9: fix scaled motion vector clipping for sub8x8 blocks.
vp9: improve signbias check.
vp9: don't allow compound references if error_resilience is enabled.
vp9: clamp segmented lflvl before applying ref/mode deltas.
vp9: reset loopfilter mode/ref deltas on keyframe.
vp9: fix crash when playing back 440/440 content with width%64<56.
vp9: extend loopfilter workaround for vp9 h/v mix-up to work for 422.
vp9: clip motion vectors in the same way as libvpx does.
vp9: set skip flag if the block had no coded coefficients.
vp9: apply mv scaling workaround only when subsampling is enabled.
vp9: read all 4x4 blocks in sub8x8 blocks individually with scalability.
vp9: fix segmentation map referencing upon framesize change.
vp9: disable more pmulhrsw optimizations in idct16/32.
vp9: disable all pmulhrsw in 8/16 iadst x86 optimizations.
Merged-by: Michael Niedermayer <michaelni@gmx.at>
If we find a second non-sub8x8 motion vector for a non-first sub8x8
block, and the clamped value is identical to the first non-sub8x8
motion vector, then the resulting nearmv motion vector is forced to
zero.
libvpx (probably accidentally) clears the bits if error_res is set,
along with keyframe/intraonly. This probably wasn't the intention
(since it's local data), but it's behaviour we have to copy...
Makes no real difference, but maybe scares coverity less (CID1297578)
Reviewed-by: "Ronald S. Bultje" <rsbultje@gmail.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
The practical effect of this is that the scaling will wrongly not be
applied to the interpolation edge (the 3/4 constants in this patch).
In other words, we clip to the pre-scaling interpolation, even though
these should be clipped post-scaling. The resulting out-of-frame MVs
are thus automatically clipped within the visible portion of the frame,
which is probably not the intention, but is unfortunately what libvpx
does, so we need to copy that behaviour.
This reproduces libvpx behaviour. It seems like it originally only
targeted loopfilter behaviour, but this unfortunately effects following
block contexting and thus directs bitstream sync.
Fixes CID1271788
with this change the value is more explicitly checked, it was fully checked
before though
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Personally, I need the decoder to back out if get_format() returns no
usable pixel format. This didn't work because the error code was not
propagated down the call chain. This in turn happened because the
variable declaration removed in this patch shadowed the variable, whose
value is returned at the end of the function. Consequently, failures of
decode_nal_unit() were ignored in this place.
Reviewed-by: Andreas Cadhalpun <andreas.cadhalpun@googlemail.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Recently normalization (av_normalize_sf) of output was added to av_add_sf.
This normalization is used for better precision for small values and the
purpose of this (quite simple) test case is to test difference between double
and softfloat.
The values used are tailored to maximally highlighte problem with precison when
normalization is not used.
Signed-off-by: Nedeljko Babic <nedeljko.babic@imgtec.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
The new code only asks for version 1 if its actually version 1 and
prints the version bytes if its something else
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
The positioning was completely wrong. First, the coordinates are
expressed in ASS playback resolution (which is by default 384x288).
Secondly, the coordinates define a drawing rectangle, not a moving area.
The previous code was making subtitles move from a random position to
another random position.
Here we rescale assuming the video resolution is a DVD one (720x480). We
can't really do anything better so far, but since this positioning
information is often from a DVD rip we can consider them relatively
safe.
We got defective video when use GCC 4.9.2 instead of GCC 4.9.1 to compile FFMEPG. And further found
that GCC 4.8 and 4.9 need patch to fix the lvsl/lvsr bug on POWER LE, and GCC 5.1 contains
the correct code since its release. The message on gcc-patches requesting approval for lvsl/lvsr
patch is at https://gcc.gnu.org/ml/gcc-patches/2014-10/msg00228.html.
The fixed code avoids using lvsl and will not depends on GCC version, also it uses less instructions on POWER LE.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Added in 361702660d. Modified version that
doesn't use this label merged in 55231323b0,
thus obsoleting this label.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* commit '3b5e5e6a29d62462d0505287042fa4c2b99c4f2b':
libx265: Use the Multi-library Interface
See: 94c20de429
Merged-by: Michael Niedermayer <michaelni@gmx.at>
This is useful for client programs to ask for nv12 surfaces instead of the
current default (uyvy), since those are more efficient to decode to.
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
Use the Multi-library interface to load at runtime x265 libraries
supporting alternative bit depths (e.g. 8bit and 16bit).
The linked library will try to load the library supporting the
pixel format if it is not supported by itself.
Fallback requesting the native library (passing 0 to x265_api_get) if
a library supporting the requested bit depth is not available.
Signed-off-by: Gopu Govindaswamy <gopu@multicorewareinc.com>
Signed-off-by: Derek Buitenhuis <derek.buitenhuis@gmail.com>
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
This partly undoes 7b35a01.
The intent of patch 7b35a01 was to no longer use build_date and
build_time as attributes of programVersion, but the patch also had the
effect of making all records generated with an earlier ffprobe build with
build_date and build_time as invalid.
This patch puts the two attributes back but without mandating their use,
thus older ffprobe records as backwards compatible with the current
schema and their use is no longer required.
Signed-off-by: Stefano Sabatini <stefasab@gmail.com>
1.Option -march=loongson3a conflicts with -mips64 or -mips64r2.
2.Option -mhard-float has been removed.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
av_image_fill_pointers always aligns the palette, but the padding
bytes don't (and can't) get initialized in av_image_copy.
Thus initialize them in av_image_alloc.
This fixes 'Syscall param write(buf) points to uninitialised byte(s)'
valgrind warnings.
Signed-off-by: Andreas Cadhalpun <Andreas.Cadhalpun@googlemail.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Since commit 676a395a aac->frame->data is not necessarily allocated at
the end of aac_decode_frame_int if avctx->channels is 0.
In this case a bogus frame without any data, but non-zero nb_samples is
returned.
Signed-off-by: Andreas Cadhalpun <Andreas.Cadhalpun@googlemail.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
The previous version checked for 14-bit streams and did not properly
work across buffer boundaries.
Use the 64-bit parser state to make extended sync word detection work
across buffer boundary and check the extended sync word for 16-bit LE
and BE core streams to reduce probability of alias sync detection.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
Since len is an unsigned int, the comparison is currently treated as
unsigned and thus ignores all errors from avio_read.
Thus cast len to int, which is unproblematic, because at that point len
is between 0 and 4.
This fixes 'Conditional jump or move depends on uninitialised value'
valgrind warnings in is_tag.
Signed-off-by: Andreas Cadhalpun <Andreas.Cadhalpun@googlemail.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
ffmpeg can now use the x265 multi-library interface to make a runtime
selection between a number of libx265 libraries (perhaps 8bpp and 16bpp).
ffmpeg will link to one build of libx265 (statically or
dynamically) and this linked version of libx265 will support one
bit-depth (8 or 10 bits). At runtime, ffmpeg now has the option to request the
encoder to use a different bit depth(8 or 10). If the requested bitdepth
is zero, or if it matches the bitdepth of the system default libx265 (the
currently linked library), then this library will be used for encode.
If ffmpeg requests a different bit-depth, the linked libx265 will attempt
to dynamically bind a shared library with the requested bit-depth from the install
location (default or user-specified).
new x265 API:
const x265_api* api = x265_api_get(int bitDepth);
x265_api - holds the libx265 public API functions
bitDepth - requested API for 8bpp or 16bpp
note: Use 0 to indicate native bit depth of the linked libx265 and
x265_api_get(0) is guaranteed to return a non-null pointer
Signed-off-by: Gopu Govindaswamy <gopu@multicorewareinc.com>
Signed-off-by: Derek Buitenhuis <derek.buitenhuis@gmail.com>
* commit 'b8d2630c5327d2818d05c8a48be0417905d8e0fd':
dashenc: Reduce the segment duration if cutting out parts with edit lists
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'ac1a1cb948fe29975424e367173b88db48792144':
dashenc: replace attribute id with contentType for the AdaptationSet element
See: 32a4177a62
Merged-by: Michael Niedermayer <michaelni@gmx.at>
id should be an integer, not a string. It is also optional, so use
contentType instead which is the proper attribute for these values.
This addresses ticket #4545, fixing an MPD validation error.
Signed-off-by: James Almer <jamrial@gmail.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'b9f7a677083647d85e583d6d7384938766a293d7':
png: Set the color range as full range
Conflicts:
libavcodec/pngdec.c
See: 72e7553125
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '254f3daba4271c1918d9a7ad155b1442ef93ed29':
nut: Make sure to clean up on read_header failure
Conflicts:
libavformat/nutdec.c
See: 361702660d
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '243e8443cd9e83c887e3f5edf09a169e7783d14e':
alac: Reject rice_limit 0 if compression is used
Conflicts:
libavcodec/alac.c
See: 4b657a1b1e
Merged-by: Michael Niedermayer <michaelni@gmx.at>
This makes sure that the time + duration of the first segment
matches the start time of the next segment for e.g. AAC audio
with encoder delay.
Signed-off-by: Martin Storsjö <martin@martin.st>
id should be an integer, not a string. It is also optional, so use
contentType instead which is the proper attribute for these values.
This fixes an MPD validation error.
Signed-off-by: James Almer <jamrial@gmail.com>
Signed-off-by: Martin Storsjö <martin@martin.st>
* commit '295e05a762332c5edcc84c325e94457815a51b5c':
ape: Support _0000 files with nblock smaller than 64
Conflicts:
libavcodec/apedec.c
See: 699341d647
Merged-by: Michael Niedermayer <michaelni@gmx.at>
This currently works for most users because
avformat_open_input sets it, but this patch fixes any
applications not using that function.
Signed-off-by: Reimar Döffinger <Reimar.Doeffinger@gmx.de>
No real difference in quality, its a bit slower for the same dia_size as more
vectors are searched for the same dia_size
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
APIC tags always have a description. Tag writers obviously leave it
empty if there is no description. In this case, libavformat would export
"" as title. Do not set the title instead.
1.Loongson now have two series CPU supported MMI(Multi-Media Instruct).
Loongson-3 designed multi-core have good performance in decoding.
Loongson-2's support is comming soon.
2.Replaced loongson with loongson2 and loongson3.
Signed-off-by: ZhouXiaoyong <zhouxiaoyong@loongson.cn>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
If in compression mode rice_limit = 0 leads to call
`show_bits(gb, k)` in `decode_scalar` with k = 0.
Request a sample in case it is valid and it should be accepted.
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
CC: libav-stable@libav.org
APIC tags always have a description. Tag writers obviously leave it
empty if there is no description. In this case, libavformat would export
"" as title. Do not set the title instead.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
AV_PIX_FMT_GRAY8/16 are considered YUV formats, and the color_range is
not set - so the API user will have to assume limitted range. (Unless
the API user adds a special-case for the PNG decoder.)
Just export the correct range - full range.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Image dimensions were rounded down causing rows to wrap early if dimensions were not a multiple of 4.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'e0010bb91fc0b067be8aefd2f77e6838537da433':
mux: Do not leave stale side data pointers in ff_interleave_add_packet()
Conflicts:
libavformat/mux.c
See: bfb3ed1a9d
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'd81fb63d87692765c004c19934b49427df434a07':
fate: Add a PICT test
Conflicts:
tests/fate/image.mak
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '7b734ee55dbb8476d7ad63c7daf55c534cf82d5d':
lavf: Open PICT images with Quickdraw
Conflicts:
tests/fate/image.mak
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '34efb8a169e4551326e069be47125c6c2cb7ab90':
quickdraw: Support direct pixel blocks
Conflicts:
Changelog
libavcodec/version.h
Merged-by: Michael Niedermayer <michaelni@gmx.at>
In init_planes p->xblen and p->yblen are set to:
p->xblen = s->plane[0].xblen >> s->chroma_x_shift;
p->yblen = s->plane[0].yblen >> s->chroma_y_shift;
These are later used as block_w and block_h arguments of
s->vdsp.emulated_edge_mc. If one of them is 0 it triggers an av_assert2
in emulated_edge_mc:
av_assert2(start_x < end_x && block_w > 0);
av_assert2(start_y < end_y && block_h > 0);
Signed-off-by: Andreas Cadhalpun <Andreas.Cadhalpun@googlemail.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Quickdraw packs data as a series of codes that the application is supposed
to handle, but it does not define any order in which they might appear.
Since it's unfeasible to support *all* opcodes defined by the spec,
only handle well-known blocks containing video data and ignore any unknown
or unsupported ones.
Move palette loading and rle decoding to separate functions to resue them
in other blocks and drop format initialization in init since it can
support more formats than pal8.
Validate width and height.
Remove PROTMODE as it doesn't make sense for DLLs. Also fixes a warning with the OpenWatcom linker
Export symbols as names rather then ordinals for better compatibility for minor releases.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
previously various variables had a too small type to support the required 32bit unsigned
range allowed from the spec
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
s->ref_pics[i] is later used as ref argument of interpolate_refplane,
where it is dereferenced.
If it is NULL, it causes a segmentation fault.
Signed-off-by: Andreas Cadhalpun <Andreas.Cadhalpun@googlemail.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
If bytes is large enough, bytes*8 can overflow and become negative.
In that case 'bufsize -= bytes*8' causes bufsize to increase instead of
decrease.
This leads to a segmentation fault.
Signed-off-by: Andreas Cadhalpun <Andreas.Cadhalpun@googlemail.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* commit '60f1cc4a1ffcbf24acbb543988ceeaec76b70818':
alsdec: only adapt order for positive max_order
See: 58d605ee9b
Merged-by: Michael Niedermayer <michaelni@gmx.at>
buf_idx + data_unit_size can overflow, causing the '> buf_size' check to
wrongly fail.
This causes a segmentation fault.
Signed-off-by: Andreas Cadhalpun <Andreas.Cadhalpun@googlemail.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
The minimum of the ath(x, ATH_ADD) function depends on ATH_ADD.
This patch uses the first order approximation to determine it.
For ATH_ADD = 4 this results in the value at 3407.06812 (-5.24241638)
not the one at 3410 (-5.24237967).
CC: libav-stabl@libav.org
Signed-off-by: Andreas Cadhalpun <Andreas.Cadhalpun@googlemail.com>
Signed-off-by: Anton Khirnov <anton@khirnov.net>
If max in clean_index is set to a negative ast->sample_size, the
following loop never ends:
while (max < 1024)
max += max;
Thus set ast->sample_size to 0 if it would otherwise be negative.
Signed-off-by: Andreas Cadhalpun <Andreas.Cadhalpun@googlemail.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
If bit_rate is negative, it can trigger an av_assert2 in av_rescale_rnd.
Since av_rescale returns int64_t, but st->codec_bit_rate is int, it can
also overflow into a negative value.
Signed-off-by: Andreas Cadhalpun <Andreas.Cadhalpun@googlemail.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* cehoyos/master:
lavfi/cropdetect: Fix cropdetect for > 8 bit input.
lavf/apngenc: Fix png remuxing by using default extension apng.
lavf/mxfenc: Write correct interlaced flag when muxing dnxhd.
Merged-by: Michael Niedermayer <michaelni@gmx.at>
index_scale is set to matroska->time_scale of type uint64_t.
When index_scale is int, the assignment can overflow and e.g. result
in index_scale = 0. This causes a floating point exception due to the
division by index_scale.
Signed-off-by: Andreas Cadhalpun <Andreas.Cadhalpun@googlemail.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
AV_PIX_FMT_MONOBLACK has the AV_PIX_FMT_FLAG_BITSTREAM flag, i.e.
linesize can be smaller than width.
Since x_offset is only check against the width, this can lead to
x_offset * bpp >= image_linesize.
In this case ptr could be set to a position outside the image_buf in
png_handle_row, leading to memory corruption and thus crashes.
Signed-off-by: Andreas Cadhalpun <Andreas.Cadhalpun@googlemail.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
During the loop ret can get changed. Since it is not set on all failure
paths, decode_frame_common can return 0 even though an error occurred.
Signed-off-by: Andreas Cadhalpun <Andreas.Cadhalpun@googlemail.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
This check was removed in commit 08aec6f6, but
s->last_picture.f->data[0] is still used in handle_p_frame_apng
unconditionally.
This fixes a segmentation fault.
Signed-off-by: Andreas Cadhalpun <Andreas.Cadhalpun@googlemail.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
benchmark (on intel core2 duo, gcc 4.9.1)
input samples duration 00:03:39.59
command: time -p ffmpeg -f f32le -ac 2 -ar 44100 -i input.pcm \
-filter_complex showcqt=fullhd=0:gamma=$gamma \
-f rawvideo -y /dev/null
gamma previous modified
1 48.49 s 45.38 s
2 49.33 s 48.11 s
3 80.86 s 59.80 s
4 80.84 s 51.25 s
5 80.75 s 61.06 s
6 80.93 s 61.80 s
7 80.03 s 61.56 s
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* commit '863ee06809b215895ee20cbc557eeceb904cf770':
configure: Use the right local variable in the MSVC and ICL probes
Conflicts:
configure
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '3080b0497ddf8549d86ee99b79ac0c15f44ee382':
avprobe: Support writing arrays of integers without keys
Conflicts:
avprobe.c
Not merged
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '16302246b1fcb7ad4e6f7bd31c49956a455336d2':
avconv: Add an option for automatically rotating video according to display matrix
Conflicts:
Changelog
ffmpeg_opt.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'e2d50fc2f5f3600e13055acf1a10fec35e941f37':
avplay: Add support for rotated video
Conflicts:
configure
doc/ffplay.texi
ffplay.c
See: 08c51e12b1
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Only MSVC 2010 in x64 mode, in the static msvcrt, had a
stray log2 function (which wasn't available in the headers).
MSVC 2013 has got a proper log2 function though.
Signed-off-by: Martin Storsjö <martin@martin.st>
$cc is the compiler requested as main target compiler, while $_cc
is the actual tool tested in the probe function right now (which
can also be e.g. the host compiler).
Signed-off-by: Martin Storsjö <martin@martin.st>
This is printed in a separate subgroup "displaymatrix" inside a
new group named "sidedata". The subgroup has got two values,
"rotation" (which is the parsed rotation from the matrix) and
"matrix" containing the full actual values.
Signed-off-by: Martin Storsjö <martin@martin.st>
The option is enabled by default, but can be disabled.
If this is enabled, such side data isn't copied into the output stream
(except when doing stream copy).
Signed-off-by: Martin Storsjö <martin@martin.st>
This is enabled by default, but can be disbled via the -noautorotate
option.
Based on a patch by Clément Bœsch.
Signed-off-by: Martin Storsjö <martin@martin.st>
* rbultje/vp9-profile1-wip:
vp9: add fate test for 422.
vp9: copy bug in libvpx for 4:2:2 chroma bs=8x4/4x4 prediction.
vp9: add yuv440 fate test.
vp9: fix mask_edges and filter_plane_rows/cols() for 440.
vp9: more specifically specify mask destination to mask_edges().
vp9: add fate test for profile 1 444.
vp9: don't create special u/v filter masks for 444.
vp9: merge uv loopfilter code into generic filter_plane_rows/cols().
vp9: split out loopfilter luma rows/cols functions from loopfilter_sb().
vp9: invert order of two conditions.
vp9: use correct chroma subsampling for profile 1 inter block recon.
vp9: use correct chroma subsampling for profile 1 intra block recon.
vp9: take chroma subsampling into account when walking the block tree.
vp9: support non-420 chroma subsampling for profile 1 token decoding.
vp9: increase buffer sizes for non-420 chroma subsamplings.
vp9: profile 1 header decoding.
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '6503cbf842a026faec517eb980551089168c7d8a':
ffv1enc: Add const attribute to input frame
Conflicts:
libavcodec/ffv1.h
no change, the changed field does not exist in FFmpeg
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Fix a duplicate memory allocation. priv_data should be allocated
in line 64 call to avformat_alloc_output_context2 since we pass
the correct AVFormat to it. This removes the duplicate allocation.
Signed-off-by: Vignesh Venkatasubramanian <vigneshv@google.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
This also fixes intra-only MT failures (it was the same bug), see trac
4526 and 4527.
Tested-by: James Almer <jamrial@gmail.com>
Reviewed-by: James Almer <jamrial@gmail.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* commit '06f4b1e37a08f3fd269ecbfeb0181129e5bfc86e':
avplay: Do not print a possibly uninitialized value
Conflicts:
ffplay.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '82a10225f817b2612fdd2b23af9d4f0a3408df3b':
xcbgrab: Do not assume the non shm image data is always available
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Use dyn_duf to write chunks so that we create the actual chunk
file only after the entire chunk data is available. This will help
not confuse other software looking at the chunk file (e.g. a web
server) by seeing a zero length file when ffmpeg is writing into
it.
Signed-off-by: Vignesh Venkatasubramanian <vigneshv@google.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
This will normalize sums for which mantissa is smaller than the lower boundary
(needed for implementation of fixed point aac decoder).
Signed-off-by: Nedeljko Babic <nedeljko.babic@imgtec.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Exponent usage and calculation in softfloat adjusted to the format used in
implementation of fixed point aac decoder.
Signed-off-by: Nedeljko Babic <nedeljko.babic@imgtec.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Fixes Detecting AAC with such descriptor if the parts needed for detection
are later in the stream
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Check extended sync word for 16-bit LE and BE core streams to reduce
probability of alias sync detection. Previously sync word extension was
checked only for 14-bit streams (and this check did not properly work
across buffer boundary).
Use 64-bit parser state to make extended sync word detection work across
buffer boundary.
This is sufficient to make the sample in ticket #4492 parse
successfully.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* commit '7a4f74eed51f914e9bbfebaffd4a92ac6791f819':
h264: embed the DPB in the context
Conflicts:
libavcodec/h264.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '88c612e3a4d5b584e2d9f6e2541de78d67bdfb9f':
h264: merge the init and reinit paths in update_thread_context()
Conflicts:
libavcodec/h264_slice.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '8a66fd40260b7aae6226d68c4dbad43b05a8e524':
h264: drop the reinit parameter from init_slice_header()
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'c9ccbc7333eddd025ebbde5cc4f27d68a950c623':
h264: update the current bit depth/chroma type in init_slice_header()
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '440e8dd374b732c48d564d9f1bb0ec3b1b786fb9':
h264: drop a comment that carries no useful information
Merged-by: Michael Niedermayer <michaelni@gmx.at>
It does not make sense to copy is_avc without copying this as well. This
patch should not change anything for now, but will have an effect in
later commits.
That function currently does two things -- reinitializing the DSP
contexts and setting low_delay based on the SPS values.
The former more appropriately belongs in h264_slice_header_init(), while
the latter only really makes sense in decode_slice_header().
The third call to ff_h264_set_parameter_from_sps(), done immediately
after parsing a new SPS, appears to serve no useful purpose, so it is
just dropped.
Also, drop now unneeded H264Context.cur_chroma_format_idc.
Currently, the DPB is initialized in alloc_tables() and uninitialized in
free_tables(), but those functions manage frame size-dependent
variables, so DPB management does not logically belong in there.
Since we want the init/uninit to happen exactly once per the context
lifetime, init_context()/free_context() are the proper place for this
code.
* commit '0ac8ff618c5e6d878c547a8877e714ed728950ce':
avresample: Reallocate the internal buffer to the correct size
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '82de8d71118f4eafd6a43e9ea9169bd411793798':
mpegts: Update the PSI/SI table only if the version change
Conflicts:
libavformat/mpegts.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '0c69164f451cc9ca6ce9d6e7568083e2776bc845':
h263: Convert function to macro
Conflicts:
libavcodec/h263.h
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '59dfc2b0c89f35c5805abee72c2ae4ee7af8e98d':
h263: Drop commented-out code and a related otherwise unused function
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'c3418201307c6b7a2b3e3be10f33ab4a20a32c3b':
jpeglsenc: Mark codec as init-thread-safe and init-cleanup
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'f5ba67ee1342b7741200ff637fc3ea3387b68a1b':
flacenc: Move a scratch buffer to struct used by the function
Conflicts:
libavcodec/flacenc.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Fixes the corner case in which the internal buffer size
is larger than input buffer provided and resizing it
before moving the left over samples would make it write
to now unallocated memory.
Bug-Id: 825
CC: libav-stable@libav.org
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
The existing check has two problems:
1) i + count can overflow, so that the check '< 256' returns true.
2) In the (i == 'N') case occurs a j-- so that the loop runs once more.
This can trigger the assertion 'nut->header_len[0] == 0' or cause
segmentation faults or infinite hangs.
Signed-off-by: Andreas Cadhalpun <Andreas.Cadhalpun@googlemail.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
If a PAT is finished while a PMT section filter is opened but
not yet finished, the PMT section filter is closed and all
the received data is discarded.
This is usually not an issue but some multiplexers (With very
quick PAT/PMT repetition settings) consistently emit a PMT
section start, then a PAT, and then the rest of the PMT,
causing the aforementioned behavior to result in no PMT being
finished.
In the most pathologic situation the stream information are lost
and the probe fallback miscategorizes subtitles as mp3 audio.
Avoid the issue through eliminating redundant PSI/SI table
updates by checking their version field, which is required by
the standard to be incremented on every change no matter how
minor.
CC: libav-stable@libav.org
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
Check extended sync word for 16-bit LE and BE core streams to reduce
probability of alias sync detection. Previously sync word extension was
checked only for 14-bit streams.
This follows up the similar change in avcodec/dca_parser.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
s->decoded_buffer is allocated with a min_size of:
2 * FFALIGN(blockstodecode, 8) * sizeof(*s->decoded_buffer)
Then it is assigned to s->decoded[0] (and s->decoded_buffer + FFALIGN(blockstodecode, 8)
to s->decoded[1]) and passed as out buffer to decode_array_0000.
In this function 64 elements of the out buffer are written
unconditionally and outside the array if blockstodecode is too small.
This causes memory corruption, leading to segmentation faults or other
crashes.
Thus change decode_array_0000 to write at most blockstodecode elements
of the out buffer.
Signed-off-by: Andreas Cadhalpun <Andreas.Cadhalpun@googlemail.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
AVOpenCLDeviceNode and AVOpenCLPlatformNode used fixed static buffer for holding the device and platform name.
This patch modifies these structures to use pointers instead. The memory required to hold the names is
now dynamically allocated, the size for which is determined by querying appropriate OpenCL runtime APIs.
Signed-off-by: Maneesh Gupta <maneesh.gupta@amd.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
The opt_opencl_bench function copied the device name using strcpy without checking if the source string was larger.
This patch fixes this by replacing the strcpy with av_strlcpy, with the string copy size capped to the destination buffer size.
Signed-off-by: Maneesh Gupta <maneesh.gupta@amd.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Remove the direct profile from UTCTiming element. Per DASH spec,
direct profile value should be the time at which the request was
made to the server and not the time at which the manifest was
written. So ffmpeg cannot write this value. This patch removes
the direct profile and write the UTCTiming element with the http
profile only if a URL is passed as a parameter. Update the fate
test to reflect this change.
Signed-off-by: Vignesh Venkatasubramanian <vigneshv@google.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Otherwise range_start_decoding is not necessarily run and thus
ctx->rc.range still 0 in range_dec_normalize leading to an infinite
loop.
Signed-off-by: Andreas Cadhalpun <Andreas.Cadhalpun@googlemail.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Fix a bug where the chunk muxer doesn't write the very first audio
packet (with pts == 0).
Signed-off-by: Vignesh Venkatasubramanian <vigneshv@google.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
This will test properly CRLF with make fate, make fate-subtitles and any
make fate-sub-* test. Before this commit, the rawdiff was triggered only
by make fate-subtitles.
Also make sure fate-sub-* only match the tests relying on fmtstdout
command, to at least avoid failing on MingW. See
https://ffmpeg.org/pipermail/ffmpeg-devel/2015-April/172395.html
GCC tool had a bug of PPC intrinsic interpret, which has been fixed in GCC 4.9.1. This bug lead to
errors in two of our previous patches. We found this when we update our GCC tools to 4.9.1 and by
reading the related info on GCC website. We fix our previous error in two separate commits
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
GCC tool had a bug of PPC intrinsic interpret, which has been fixed in GCC 4.9.1. This bug lead to
errors in two of our previous patches. We found this when we update our GCC tools to 4.9.1 and by
reading the related info on GCC website. We fix our previous error in two separate commits
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
HAVE_LOONGSON is replaced by HAVE_LOONGSON3. Even Loongson-2E and 2F support
Loongson SIMD instructs but have low performance for decoding. We plan to focus
on optimizing Loongson-3A1000, 3B1500 and 3A1500, and modify the configure file
to support Loongson-2 series later by adding HAVE_LOONGSON2.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'cfdaa4de6c496b0b761c763cd18067cb1af268a7':
dss_sp: use lowercase codec name without whitespace
See: 35e855d5b6
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '18db1286b04557aa2d2df7efbcb65ae825d5a469':
libxvid: Make codec use the init-cleanup flag and mark it as init-thread-safe
Conflicts:
libavcodec/libxvid.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'eae7338e1592f4a398b7c3cb9d1ac854b7a44ff8':
libx264: Make codec use the init-cleanup flag and mark it as init-thread-safe
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '74a1cad7e3ba79e5b1e5b2e2bcf6179520442679':
lclenc: Mark codec as init-thread-safe and init-cleanup
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'bb428e00ac158244d6691bf135be404e85b66a8b':
hqx: Mark codec as init-thread-safe and init-cleanup
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '43171886e08b6a2f20a1e2f3ecc95a7984b591cd':
huffyuvenc: Mark codec as init-thread-safe and init-cleanup
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'd90133b77bf69667d10e54de9aae7da223c6876a':
asvenc: Mark codec as init-thread-safe and init-cleanup
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '5bba3ab0cf7a0238ee1ea31ca2da08ce860fd8f9':
internal: Make dlog/tlog a no-op when disabled
Conflicts:
libavcodec/internal.h
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'b90adb0aba073f9c1b4abca852119947393ced4c':
rtsp: Make sure we don't write too many transport entries into a fixed-size array
Merged-by: Michael Niedermayer <michaelni@gmx.at>
The unaligned size is not handled in setctx_2d(), causing edges of images
to have improper segmentation prediction, which causes visual artifacts
at image edges a few frames later.
If the file size is much larger than what is indicated in the XING
header, the demuxer assumes it's a concatenated file, and throws away
the (presumably) incorrect duration information. Unfortunately, this
also triggers if the id3 tags are very large (embedded pictures and
such). Then the half-baked heuristic not only breaks the duration
display, but also gapless audio.
Fix it by subtracting the size of the headers (the check is off by some
bytes, but that doesn't matter at all). Note that there could be an
arbitrary amount of tags _after_ the mp3 data, but hopefully these are
not too large to trigger the heuristic in practice.
Also add a warning when this happens.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
this quiets a warning:
Failed to set VP8E_SET_NOISE_SENSITIVITY codec control: Unspecified
internal error
Reviewed-by: Michael Niedermayer <michaelni@gmx.at>
Signed-off-by: James Zern <jzern@google.com>
replace 'Refer to and to sync...' with a reference to the section that
discusses updated the source tree.
Reviewed-by: Timothy Gu <timothygu99@gmail.com>
Reviewed-by: Michael Niedermayer <michaelni@gmx.at>
Signed-off-by: James Zern <jzern@google.com>
While I'm not sure why exactly sure why the old code could end up in the
wrong position, using the generic index code is much simpler and is
known to work correctly.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* commit '1bd2646a6da808f6f9881525771db098c54bc3d2':
rtpenc_jpeg: Handle case of picture dimensions not dividing by 8
Conflicts:
libavformat/rtpenc_jpeg.c
See: 7f64a7503b
Merged-by: Michael Niedermayer <michaelni@gmx.at>
If rice_limit is 0, k can be 0 in decode_scalar, which calls show_bits(gb, k).
Signed-off-by: Andreas Cadhalpun <Andreas.Cadhalpun@googlemail.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
This fixes the calculation of the number of needed blocks to make
sure that ALL pixels are represented by the result.
Signed-off-by: Martin Storsjö <martin@martin.st>
This removes the error logging added in 4e54432164.
This avoids warnings about "Invalid interval start specification 'now'"
for live rtsp streams.
We only try to parse some of the many valid values for time ranges
in RTSP - the other ones are fully valid but not interesting for the
use case in rtsp.c, so we shouldn't warn about them.
(Parsing the time ranges is needed to allow seeking, but e.g. setting
the current realtime clock for the start time doesn't make sense.
av_parse_time has got a different mode for parsing absolute times
as well, which can handle the special case "now", but that doesn't
make much sense for this particular use in rtsp.c.)
Signed-off-by: Martin Storsjö <martin@martin.st>
* commit '358b7ec3099eca6e999ad9dc0da0a23571a7a2f8':
fate: Fix test name for pixfmts tests
Conflicts:
tests/fate-run.sh
See: e1ee0521a6
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '0a51c7d42a519c63178a4f3e35b8967f21da3a6a':
prores: Set the bits_per_coded_sample for alpha pix_fmt
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'aef0be08756e00f363c524453c948a6e2a348614':
avcodec: Unref the dummy buffer on the fail path
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '8eb57dc9d5ea13c12573e0759da0f7e79825af98':
buffersrc: Use the correct deallocation function
See: a6df9ce615
Merged-by: Michael Niedermayer <michaelni@gmx.at>
This is required if it's subsequently re-enabled with no value updates
(which means, use values that were previously set).
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
failure to calculate psnr should not result in tiny_psnr returning success
Reviewed-by: Timothy Gu <timothygu99@gmail.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Also pulled QP initialization out of inner loop, which removed some redundent code.
Added some dummy fields to PPContext to allow current code to work while
changing the rest of the postprocessing code to support the arrays.
I also increased alignment requirements for some fields in the PPContext struct to
support future avx2 code.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Prefetching functions are defined in postprocess_template using the
RENAME macro so that prefetching is used when available. For x86
targets inline asm is used and the functions are non-empty only for
cpus where prefetching is available. For non x86 targets the gcc bultin
prefetch is used if it is available, otherwise no prefetching is done.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
See sample vp90-2-14-resize-fp-tiles-16-8-4-2-1.webm from the vp9 test
vector set which reproduces the issue. This probably costs a few cycles,
but I don't think there's an easy way to workaround that.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
This fixes a NULL pointer dereference if vst->duration is 0.
The problem was introduced in commit 0588acaf.
Signed-off-by: Andreas Cadhalpun <Andreas.Cadhalpun@googlemail.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
These could be kept, but they are not overly useful. The only thing they
had over the remaining mp3 gapless test was seeking, which was incorrect
in the toc test, and only by chance correct in the notoc test.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
It's the most useful mode, because it seeks accurately, and does not
break features like gapless audio.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
"-usetoc 2" now invokes the generic seek and indexing mode. This mode
skips data until the seek target is reached, and this is exact. It also
makes gapless audio actually work if a seek past the start of the file
is involved.
Change the fate-gapless-mp3 test to use the new mode, and move the old
one to fate-gapless-mp3-toc (since the test forces use of the Xing TOC).
The new mode has a different result for the seek - this result is
actually correct.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
The mp2 seek test results change. Whether to skip samples if the file
had no LAME gapless tags was inconsistent. When seeking to the start
of the file, 529 samples were skipped, but when playing from start,
nothing was skipped. This commit changes the behavior on seek to skip
nothing.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Some players do not support setting minimumUpdatePeriod to zero.
This patch adds a new parameter that will let the users set any
value to this field. Also updates the test and the documentation.
Signed-off-by: Vignesh Venkatasubramanian <vigneshv@google.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
DASH spec requires the presence of either duration of the period
or the minimumUpdatePeriod element. This patch adds the
minimumUpdatePeriod element hardcoded with the value 0 as the
manifest will never be updated for WebM DASH Live streams. Also
updating the fate test reference file.
Signed-off-by: Vignesh Venkatasubramanian <vigneshv@google.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
The minimum of the ath(x, ATH_ADD) function depends on ATH_ADD.
This patch uses the first order approximation to determine it.
For ATH_ADD = 4 this results in the value at 3407.06812 (-5.24241638)
not the one at 3410 (-5.24237967).
Signed-off-by: Andreas Cadhalpun <Andreas.Cadhalpun@googlemail.com>
Approved-by: Claudio Freire <klaussfreire@gmail.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Using the PRIu8 format specifier to print an enum value causes a
compiler warning, so use %d instead.
Fixes ticket #4467.
Signed-off-by: Chris Watkins <watk@chromium.org>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
With this the returned timestamp should match the packet instead of
the requested timestamp, which may lay between packets
Reviewed-by: wm4 <nfxjfg@googlemail.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Patch to support VP9 encoding with new profiles 1-3.
Profile 1 (8-bit 422/444) should work with default libvpx
configuration.
However you will need to configure libvpx with
--enable-vp9-highbitdepth before building and linking
with ffmpeg for profile 2 (10-/12-bit 420) and profile 3
(10-/12-bit 422/444) encoding.
You may use the appropriate profile option on the
command line:
-profile:v 1 for 422/444 8-bit encoding
-profile:v 2 for 420 10-/12- bit encoding
-profile:v 3 for 422/444 10-/12-bit encoding
If you do not use the -profile:v option, it will be deduced
from the source format.
Signed-off-by: James Zern <jzern@google.com>
* commit 'eaa2d123f0a643664721593d248ece6bcd85f1e6':
log: Print a full backtrace along with error messages under Valgrind
Conflicts:
libavutil/log.c
libavutil/version.h
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '3b1e35d46dc910cef1d66f6964e6800cae5fc89b':
fate: Omit the results if the test passed
See: 1a562adb01
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'd34039b171bebe37bf723a1b03e5651267099739':
rmenc: Drop the temporary buffer for ac3 byteswap
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '2cc3936599b6fc63143036659653d1be0624360f':
dashenc: Add a publishTime field in dynamic manifests
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Useful to understand where and in what execution state a certain message
is generated. It is enabled only when optimizations are disabled, since
function names are not printed otherwise.
Signed-off-by: Vittorio Giovara <vittorio.giovara@gmail.com>
Seeking to a negative time did not have the desired effect of seeking to
the next valid position (the file start). On the other hand, just
"-ss 0" will normally seek to a position higher than 0, because it adds
the start time of the file. (The start time is not 0 because the gapless
code skips a few samples from the start.)
Fix this by using the "-seek_timestamp 1" option, which makes "-ss 0" do
what you'd expect it would do.
Also put the -ss option at the right place, before -i. This actually
makes it seek, instead of something completely else. The ".out-3" test
is no different in the -usetoc 0/1 cases, because the seeking is
inaccurate (in both cases).
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
The FATE server does not report this information anyway and omitting
it makes the successful run send much less data.
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
* commit '09bd7ddf2002562befa15a2a4d065b79ad14ed8e':
aacdec: consistently use avctx for logging in decode_eld_specific_config
See: 5b75689b98
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '9286de045968ad456d4e752651eec22de5e89060':
mov: Double-check that alias path is not an absolute path
Conflicts:
libavformat/mov.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'e6fb844f7b736e72da364032d251283bce9e63ad':
Implement shared parsing of INFO tag in Canopus family
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '453642f8afe9f979fcc813a246b1ec656ec36a93':
hqx: Store shareable data in main decoder context
Conflicts:
libavcodec/hqx.c
libavcodec/hqx.h
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'ea031b75fb50c59196ccb654c9d143fb75365da9':
hqx: Move DSP related code to a separate file
Conflicts:
libavcodec/hqx.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
nlvl_to and nlvl_from can be set to 1 if both alias and target files
are in the same directory, so actually check the first character of the
string. We can do this because MacOS filepaths (alis type 2) are always
converted to UNIX filepaths (alis type 18).
Absolute paths can be stored in alis type 2 and 18 according to my research:
the first is the canonical MacOS filepath, with path level separated by
colons, and the volume name within the filepath, while the second should be the
absolute filesystem path from the mount point.
If begin is smaller than t, the subtraction 'begin -= t' wraps around,
because begin is unsigned. The same applies for end < t.
This causes segmentation faults.
Signed-off-by: Andreas Cadhalpun <Andreas.Cadhalpun@googlemail.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
avctx->bits_per_raw_sample is used in get_sbits_long, which only
supports up to 32 bits.
Signed-off-by: Andreas Cadhalpun <Andreas.Cadhalpun@googlemail.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
If the same idx is used for more than one i, at least one entry in
sconf->chan_pos remains uninitialized.
This can cause segmentation faults.
Signed-off-by: Andreas Cadhalpun <Andreas.Cadhalpun@googlemail.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
This avoids waiting for a count to increase which will always be 0 and may
reduce the startup delay for affected streams (rare)
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Apparently, some live streams can delete segments too early, maybe
because the client is too far behind. In this case, it's better to skip
the segment, instead of returning EOF. (Yes, the HLS demuxer actually
returns AVERROR_EOF if opening the segment returns a 404 HTTP error.)
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* commit '1336bb06c9fbf9a14765e9f78616f2aad4f3a45a':
configure: Simplify avisynth check
Conflicts:
configure
No change as check_lib2 was already used
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '247aa7af7d8197247c181e3fbfe8d93d75e41b29':
avisynth: Simplify shared library name construction
Conflicts:
libavformat/avisynth.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Removing a bunch of questionable hacks makes it work. These hacks
apparently try to make concatenated mp3s with Lame headers seekable,
which doesn't make too much sense anyway. The main change is that we
trust the Xing header file size field now (the same field is used for
seeking with Xing TOC). Note that a mp3 might contain an unknown number
of unsupported additional tags, so we can't reliably compute this size
manually.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Return appropriate error codes and propagate the error codes from
helper functions to the outer calls. Also fix a potential leak in
call to av_realloc.
Signed-off-by: Vignesh Venkatasubramanian <vigneshv@google.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
This fixes an invalid read if end is 0:
band_end = ff_ac3_bin_to_band_tab[end-1] + 1;
Depending on what is before the array, this can cause stack smashing,
when band_end becomes too large.
Signed-off-by: Andreas Cadhalpun <Andreas.Cadhalpun@googlemail.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
If band->thr is 0.0f, the division is undefined, making norm_fac not a
number or infinity, which causes psy_band->threshold to become NaN.
This is passed on to other variables until it finally reaches
sce->sf_idx and is converted to an integer (-2147483648).
This causes a segmentation fault when it is used as array index.
Signed-off-by: Andreas Cadhalpun <Andreas.Cadhalpun@googlemail.com>
Reviewed-by: Claudio Freire <klaussfreire@gmail.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
ac may be NULL and then accessing ac->avctx results in a segmentation fault.
Signed-off-by: Andreas Cadhalpun <Andreas.Cadhalpun@googlemail.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
This fixes segmentation faults, when pic->linesize[0] is negative.
In that case 'line * pic->linesize[0] + pixel_ptr' is treated as
unsigned and wraps around.
This reverts commit 7d78a964.
The problem was introduced in commit f7e1367f, which should obsolete
that commit.
Signed-off-by: Andreas Cadhalpun <Andreas.Cadhalpun@googlemail.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
VP80 fourcc are writed for all contexts (without ctx->codec_tag)
how to reproduce the issue:
1) Get any vp9 video (for example http://base-n.de/webm/out9.webm)
2) ffmpeg -i out9.webm -vcodec copy out9.ivf
3) out9.ivf have VP80 fourcc at ivf header
The proposed fix solves this issue
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
The spec madandate both time_scale and num_units_in_tick greater than 0,
however since they are not essential for decoding, just ignore the whole
block and try to finish parsing the VUI.
Related to Ticket4445.
Signed-off-by: Vittorio Giovara <vittorio.giovara@gmail.com>
This commit implements the perceptual noise substitution AAC extension. This is a proof of concept
implementation, and as such, is not enabled by default. This is the fourth revision of this patch,
made after some problems were noted out. Any changes made since the previous revisions have been indicated.
In order to extend the encoder to use an additional codebook, the array holding each codebook has been
modified with two additional entries - 13 for the NOISE_BT codebook and 12 which has a placeholder function.
The cost system was modified to skip the 12th entry using an array to map the input and outputs it has. It
also does not accept using the 13th codebook for any band which is not marked as containing noise, thereby
restricting its ability to arbitrarily choose it for bands. The use of arrays allows the system to be easily
extended to allow for intensity stereo encoding, which uses additional codebooks.
The 12th entry in the codebook function array points to a function which stops the execution of the program
by calling an assert with an always 'false' argument. It was pointed out in an email discussion with
Claudio Freire that having a 'NULL' entry can result in unexpected behaviour and could be used as
a security hole. There is no danger of this function being called during encoding due to the codebook maps introduced.
Another change from version 1 of the patch is the addition of an argument to the encoder, '-aac_pns' to
enable and disable the PNS. This currently defaults to disable the PNS, as it is experimental.
The switch will be removed in the future, when the algorithm to select noise bands has been improved.
The current algorithm simply compares the energy to the threshold (multiplied by a constant) to determine
noise, however the FFPsyBand structure contains other useful figures to determine which bands carry noise more accurately.
Some of the sample files provided triggered an assertion when the parameter to tune the threshold was set to
a value of '2.2'. Claudio Freire reported the problem's source could be in the range of the scalefactor
indices for noise and advised to measure the minimal index and clip anything above the maximum allowed
value. This has been implemented and all the files which used to trigger the asserion now encode without error.
The third revision of the problem also removes unneded variabes and comparisons. All of them were
redundant and were of little use for when the PNS implementation would be extended.
The fourth revision moved the clipping of the noise scalefactors outside the second loop of the two-loop
algorithm in order to prevent their redundant calculations. Also, freq_mult has been changed to a float
variable due to the fact that rounding errors can prove to be a problem at low frequencies.
Considerations were taken whether the entire expression could be evaluated inside the expression
, but in the end it was decided that it would be for the best if just the type of the variable were
to change. Claudio Freire reported the two problems. There is no change of functionality
(except for low sampling frequencies) so the spectral demonstrations at the end of this commit's message were not updated.
Finally, the way energy values are converted to scalefactor indices has changed since the first commit,
as per the suggestion of Claudio Freire. This may still have some drawbacks, but unlike the first commit
it works without having redundant offsets and outputs what the decoder expects to have, in terms of the
ranges of the scalefactor indices.
Some spectral comparisons: https://trac.ffmpeg.org/attachment/wiki/Encode/AAC/Original.png (original),
https://trac.ffmpeg.org/attachment/wiki/Encode/AAC/PNS_NO.png (encoded without PNS),
https://trac.ffmpeg.org/attachment/wiki/Encode/AAC/PNS1.2.png (encoded with PNS, const = 1.2),
https://trac.ffmpeg.org/attachment/wiki/Encode/AAC/Difference1.png (spectral difference).
The constant is the value which multiplies the threshold when it gets compared to the energy, larger
values means more noise will be substituded by PNS values. Example when const = 2.2:
https://trac.ffmpeg.org/attachment/wiki/Encode/AAC/PNS_2.2.png
Reviewed-by: Claudio Freire <klaussfreire@gmail.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Softfloat will be used in implementation of AAC fixed point decoder.
This change is needed in order to more easily integrate ffmpegs softfloat in
already developed algorithm for AAC.
Signed-off-by: Nedeljko Babic <nedeljko.babic@imgtec.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Replace an unchecked av_malloc call with stack allocation as the size
is always a constant.
Signed-off-by: Vignesh Venkatasubramanian <vigneshv@google.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
This commit replaces the previous hardcoded constants with both new and previously
defined macros from aac.h. This change makes it easy for anyone reading the code
to know how encoding and decoding scalefactors works. It's also possibly
a step in unifying some of the code across both the encoder and decoder.
Reviewed-by: Claudio Freire <klaussfreire@gmail.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* commit '13e4f2c7f7857feb6885f0c2ea8c9ddf438f46ea':
mpeg4videodec: Remove useless messages
Conflicts:
libavcodec/mpeg4videodec.c
not merged, the messages have been an important aid for debugging in old mpeg4
and help understanding bug reports
Merged-by: Michael Niedermayer <michaelni@gmx.at>
In order to safely exit when the user tries to use AviSynth 2.5, the
continue_on_fail value for 2.6's functions need to be set to 1.
Otherwise, the library loader fails before the 'upgrade to 2.6'
log message appears.
Signed-off-by: Diego Biurrun <diego@biurrun.de>
They seem to sometimes trigger with old AVI files. They are just
confusing, do not help anyone, and use sloppy language.
Signed-off-by: Diego Biurrun <diego@biurrun.de>
This is optional, but ensures that linking with -Wl,--as-needed does not
drop the library containing the MMAL VC driver. The driver normally
"registers" itself in the library constructor, but since no symbols are
explicitly referenced, the linker could remove it with --as-needed
enabled.
Signed-off-by: Diego Biurrun <diego@biurrun.de>
This commit adjusts the intial offset for PNS values, introduced
with commit f7f71b5795 earlier. This
commit shifts the value in such a way that no further offsets are
required in the aaccoder.c file. Earlier version of the PNS patch had 2 offsets in both the aaccoder and aacenc.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
YCgCo decoding works just fine. It depends on the API user what is done
with the output. Some API users might support it, some not. Some users
might support it under certain circumstances only.
It is not the job of the decoder to print this message. If the API user
supports it, this message is extremely unhelpful.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
txoffer (e.g. http://tori.aoi-chan.com/ ) redirects to the same URI on your
first request, and serves the actual file on the second. It's stupid, but AFAIK
technically compliant. We'd previously see the server not handing back a Range
header and return an error; now, instead, we see that there's a redirect and
keep track of the offset we want while trying again at the new URL.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
This commit implements support for writing the noise energy values used in PNS.
The difference between regular scalefactors and noise energy values is that the latter
require a small preamble (NOISE_PRE + energy_value_diff) to be written as the first
noise-containing band. Any following noise energy values use the previous one to
base their "diff" on. Ordinary scalefactors remain unchanged other than that they ignore the noise values.
This commit should not change anything by itself, the following commits will bring it in use.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* commit '0b72a47f5592ecc035edd5bac57558ad9604612d':
rtsp: Check a malloc return value
See: 4b03002527
Merged-by: Michael Niedermayer <michaelni@gmx.at>
With this patch http can be used to listen for POST data to be used as an input stream.
Signed-off-by: Stephan Holljes <klaxa1337@googlemail.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
This fixes the calculation of the number of needed blocks to make
sure that ALL pixels are represented by the result.
Reviewed-by: Thomas Volkert <silvo@gmx.net>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Imagination Technologies has come up with MIPS Warrior Processor Cores.
More details can be found at-
http://www.imgtec.com/mips/warrior/pclass.asphttp://www.imgtec.com/mips/warrior/iclass.asp
This is a preparation patch to submit optimized code for MSA (MIPS-SIMD-Architecture)
This patch set is adding support for P5600 and I6400 CPUs.
MIPS 'generic' case is added, with mips32r2 arch as default (fpu and dsp opt enabled).
Sample configurations for new MSA architectures-
$ ./configure --enable-cross-compile --cross-prefix=<PATH> --arch=mips --target-os=linux --cpu=p5600
$ ./configure --enable-cross-compile --cross-prefix=<PATH> --arch=mips --target-os=linux --cpu=i6400
Signed-off-by: Shivraj Patil <shivraj.patil@imgtec.com>
Reviewed-by: Nedeljko Babic <Nedeljko.Babic@imgtec.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* commit '0266988ccd15436eaf5f7bb6f9509e6bfd5ce589':
hqx: Fix clipping error in idct put function
See: 92f94fd5dd
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'be089af38f65dc8b1fe3564f98020fc815577edb':
mov: Rely on box type rather than file type for colr atom
Conflicts:
libavformat/mov.c
See: 0276b95242
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Although it's not allowed to use only allows 'nclc' in ISOM files, there
are samples that do not always respect this rule. This change prevents
atom overread and a spurious color range initialization.
Signed-off-by: Vittorio Giovara <vittorio.giovara@gmail.com>
MicroDVD has a "hack" for specifying the video framerate the subtitle
was authored against. The demuxer reads this hint correctly, but didn't
skip it correctly.
This was not noticed, because the exported packet has its duration set
to 0, making it invisible (depending on the API user's rendering logic).
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Generally, libavformat exports cover art pictures as video streams with
1 packet and AV_DISPOSITION_ATTACHED_PIC set. Only matroskadec exported
it as attachment with codec_id set to AV_CODEC_ID_MJPEG.
Obviously, this should be consistent, so change the Matroska demuxer to
export a AV_DISPOSITION_ATTACHED_PIC pseudo video stream.
Matroska muxing is probably incorrect too. I know that it can create
broken files with an audio track and just 1 video frame when e.g.
remuxing mp3 with APIC to mkv. But for now this commit does not change
anything about muxing, and also continues to write attachments with
AV_CODEC_ID_MJPEG should the muxer application have special knowledge
that the Matroska is broken in this way.
Signed-off-by: Anton Khirnov <anton@khirnov.net>
MSVC does not support the %F and %T format specifiers in strftime.
Replace that with the expanded version. This fixes the broken fate
tests in MSVC (webm-dash-manifest-*).
Signed-off-by: Vignesh Venkatasubramanian <vigneshv@google.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* commit '108f2f381acb93827fb4add0517eeae859afa3bf':
parseutils: Extend small_strptime to be used in avformat
Conflicts:
libavutil/parseutils.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
This patch adds support for WebM Live Muxing by adding a new WebM
Chunk muxer. It writes out live WebM Chunks which can be used for
playback using Live DASH Clients.
Please see muxers.texi for sample usage.
Signed-off-by: Vignesh Venkatasubramanian <vigneshv@google.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* commit '5637ff01218a44fcc1fff9b4382a15a6470abcc9':
libavcodec: Clarify the documentation of the internal codec capability flags
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'bd737b5178f361a9b592691848f29a7a79603a7e':
h264: reset the private data in init_thread_copy()
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '65afa65e7393e7745427e267d6c6ca814c7c8b45':
h264: drop redundant initialization of the scaling matrices
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'e1f907711a91e5ce19402a1831cfbe8f709b67f7':
h264: factor out common code from init() and init_thread_copy()
Conflicts:
libavcodec/h264.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '43fd3dd80ca2d1c2ccf6a7b7632db544c809c690':
h264: drop redundant initialization in init()
Conflicts:
libavcodec/h264.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
They are no longer initialized in ff_h264_decode_init() since 43fd3dd,
so svq3 needs to initialize the manually.
Fixes svq3 decoding, broken since 43fd3dd.
* commit '84f226a3bcd8b39801a4c9051c033ab7d61aaf76':
h264: use the correct SPS during PPS parsing
Conflicts:
libavcodec/h264_ps.c
See: dc35b77b28
Merged-by: Michael Niedermayer <michaelni@gmx.at>
The generic code copies the main context's private data to all the
others. However that is quite dangerous, as it might end up copying some
pointers that are or will become invalid.
Since everything we actually need will be copied later in
update_thread_context(), it's safest to zero the private data in
init_thread_copy(), so it works the same way as init for the main
context.
This patch adds support for creating DASH manifests for WebM Live
Streams. It also updates the documentation and adds a fate test to
verify the behavior of the new muxer flag.
Signed-off-by: Vignesh Venkatasubramanian <vigneshv@google.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
This patch adds support for parsing live files (produced by
-f webm_chunk) which contains only the headers but no packets. This
is only used when using -f webm_dash_manifest. There will be a
follow up patch which adds live support to WebM DASH Manifest
muxer.
Signed-off-by: Vignesh Venkatasubramanian <vigneshv@google.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Generally, libavformat exports cover art pictures as video streams with
1 packet and AV_DISPOSITION_ATTACHED_PIC set. Only matroskadec exported
it as attachment with codec_id set to AV_CODEC_ID_MJPEG.
Obviously, this should be consistent, so change the Matroska demuxer to
export a AV_DISPOSITION_ATTACHED_PIC pseudo video stream.
Matroska muxing is probably incorrect too. I know that it can create
broken files with an audio track and just 1 video frame when e.g.
remuxing mp3 with APIC to mkv. But for now this commit does not change
anything about muxing, and also continues to write attachments with
AV_CODEC_ID_MJPEG should the muxer application have special knowledge
that the Matroska is broken in this way.
Fixes trac #4423.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* cehoyos/master:
Fix codec fps diplay for very small fps.
lavf/mpeg: Support alaw in Hikvision CCTV recordings.
lavf/mpeg: Support more audio codecs in Hikvision CCTV recordings.
Merged-by: Michael Niedermayer <michaelni@gmx.at>
ER with slice threads is buggy and since the merge of the libav cleanup broken
as the ER context which is supposed to be per frame has been placed in
the slice context, so there are multiple per frame which does not work as is.
Theres no bug report about ER with frame threads. If someone knows of a
case where it crashes / fails without slice threads please mail me and
open a ticket on trac.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* commit '3892bdab9b652eb003ab95e167f1765e0b0ea035':
avconv: do not overwrite the stream codec context for streamcopy
Conflicts:
ffmpeg.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'df528b11ac607de13a7c438f2a51f2119f71a03c':
hevc: make sure no dangling pointers remain around on VPS/SPS change
Conflicts:
libavcodec/hevc_ps.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'ce0bc09ee2580d49fec90a6eb0de2ba1b580c854':
hevc: do not change the VPS if its contents are the same
Conflicts:
libavcodec/hevc_ps.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '7d097a0fc57f0fa8385962a539c657c2f40b5ed0':
mpegtsenc: Take max_delay into account when buffering multiple audio packets into one PES packet
Conflicts:
libavformat/mpegtsenc.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Otherwise it is shown even after the file was fixed with avidemux,
because the userdata string still ends with 'p'.
Signed-off-by: Andreas Cadhalpun <Andreas.Cadhalpun@googlemail.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
This improves the last frames duration with CFR and when the input durations
are inaccurate or missing
Fixes Ticket4119
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
I found another MXF File containing ProRes with the following
codec_uls: 060E2B34040101010E04020102110500
Therefor I relaxed the pattern.
Related to issue #4349
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Since we are not doing encoding, there is no point in ever touching the
separate encoding context. Always use the stream codec context.
Fixes writing attachments.
CC:libav-devel@libav.org
Additionally always set the software pixel format, so it's available
even if ff_get_format() is not called later. This will be useful for
exporting stream parameters from init().
Make sure we don't buffer up more than max_delay worth of data
before writing a PES packet, even if pes_payload_size is set to
a larger value.
Signed-off-by: Martin Storsjö <martin@martin.st>
The AVSC_API changes in the new headers mean that the 2.6 alphas
are just as incompatible as 2.5 is.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
In order to safely exit when the user tries to use AviSynth 2.5,
the continue_on_fail value for 2.6's functions need to be set to
1. Otherwise, the library loader fails before the 'upgrade to
2.6' log message appears.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Should fix compilation failures with strict compilers
Signed-off-by: James Almer <jamrial@gmail.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
It was not possible to set a profile before, the builtin profile
parameter does not seem to work propperly.
To be compatible with libx264, this overlays it with a local parameter
that expects a string, instead of an int, that takes the well known values
"high", "main" or "baseline".
Reviewed-by: Philip Langdale <philipl@overt.org>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Additionally, update some documentation with support for APNG
Signed-off-by: Donny Yang <work@kota.moe>
Reviewed-by: Paul B Mahol <onemda@gmail.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* commit '8c9c5479c4ba729b4ba868ab541a90b2061a7c2f':
rtp: Add an option to set the send/receive buffer size
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '3c47e7c4350f73fc77d8e76f0dd6d2946b13c5cc':
rtp: Map the urloptions to AVOptions
Conflicts:
libavformat/rtpproto.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '4978850ca2cb1ec6908f5bc79cc592ca454d11e8':
build: Split JPEG-related tables off into a separate component
Conflicts:
configure
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'e6e3dcba0c6f11bd7022e2d3b9bcb7b6a09d6c80':
mjpeg: Move code only used in the encoder(s) to the appropriate header
Conflicts:
libavcodec/mjpegdec.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '23944d29a22a2cd602753b3705f73011c3bf0b18':
indeo: Give Indeo4/5 shared code a more consistent name
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '7d3183d3a4e800ab7a7fa24f49968a1b1bcc0161':
qsv: Skip header compilation depending on what parts of qsv are enabled
Conflicts:
libavcodec/Makefile
Merged-by: Michael Niedermayer <michaelni@gmx.at>
This prevents sub-muxers from trying to seek back to the beginning of the
whole stream, only to find themselves overwriting some video data in the
current (often last) segment.
We only do this when not writing individual header/trailers.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
This permits some interesting segmenting techniques with formats like Matroska,
where you can concatenate the header and segments [N, nb_segments) and get
a working file that starts at segment N's start time.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* cehoyos/master:
lavc/h264_refs: Fix compilation with -DTRACE.
Fix make checkheaders if libmfx is not available.
lavf/gif: Add an option max_gif_delay to limit the frame duration.
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Support mouse clicks capture while recording a screen on OSX >= 10.7.
Reviewed-by: Thilo Borgmann <thilo.borgmann@mail.de>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Add support for cursor capturing while recording a screen for OSX >=
10.8.
Reviewed-by: Thilo Borgmann <thilo.borgmann@mail.de>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Support framerate ands video size options on AVCaptureDevices for
OSX >= 10.7 and iOS >= 7.0.
For screen captures, only the framerate option is taken into account.
Reviewed-by: Thilo Borgmann <thilo.borgmann@mail.de>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
There's still an if, as QP needs to be modified if isColor=0, but it
still removes a unecessary branch.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* commit '9ba27c2348d26000257e891e40a72facb0d916be':
qsvdec: add 'decode' to the non-static function names
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'd0a63d8b989647ffdb5f40da8e1feaffe1a8e791':
qsvdec: split off some code that will be shared with the encoder
Conflicts:
libavcodec/Makefile
libavcodec/qsvdec.h
Merged-by: Michael Niedermayer <michaelni@gmx.at>
API allows protocol implementations to provide API that
allows to list directory content.
API is similar to POSIX opendir/readdir/closedir.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
The new information is printed at verbose log level and can thus be switched on and off
through the log level
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
If the user attempts to use AviSynth 2.5, an error message will
now tell them they need to upgrade.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
The demuxer doesn't use these functions, so it shouldn't affect
anything. Investigate whether this can be fixed by how headers
are checked in configure.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Sufficiently new nvenc hardware (GM20x or later) has support for H.265
encoding. This works the same as the H.264 encoder except the
codec parameters are different.
Due to the fact that common codec parameters are not shareable, there's
quite a bit of conditional logic you'd wish we could do without, but
such is life.
Signed-off-by: Philip Langdale <philipl@overt.org>
Reviewed-by: Timo Rothenpieler <timo@rothenpieler.org>
Fixes out of array access
Fixes: da14e86d8462be6493eab16bc2d40f88/asan_heap-oob_204cfd2_528_cov_340150052_COMPRESS.BMP
Found-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Fixes ticket #4387.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Note, Vittorio Giovara had submitted a very similar fix to me privately
a few hours before this, iam applying Jochens because it comes with a
commit message too and i had not yet applied Vittorios, but For sake
of credit, Vittorio independently solved this first
* commit '1188119624e42c1b2ce5be6137d2e6c6f4f03328':
avisynth: update documentation about the avisynth_c.h header
Conflicts:
doc/general.texi
Not merged as FFmpeg provides the needed headers in compat/
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'a8c99205ca8703bd849efae13fcf844315c7147d':
avisynth: Fix compilation against current 2.6 header(s).
Merged-by: Michael Niedermayer <michaelni@gmx.at>
AviSynth 2.6 (and by extension, AviSynth+) moves these functions
into AVSC_API. This requires both adjusting their normal use,
and for AvxSynth, adjusting the position/use of the USING_AVISYNTH
ifdefs.
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
* commit 'b21af32aed7e343f962753943e9f16baedfb1750':
lavc: Prefer x264 over openh264 if both libraries are available
See: ddae03f69b
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '592a04054e6423be5050efd2bceece48b10b9c1d':
pixdesc: Replace a few leftover instances of non AV-prefixed flags
Conflicts:
libavutil/pixdesc.c
See: c7c71f95f8
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'e4fe535d12f4f30df2dd672e30304af112a5a827':
mov: Write the display matrix in order
Conflicts:
libavformat/mov.c
libavutil/version.h
Merged-by: Michael Niedermayer <michaelni@gmx.at>
This will allow to copy the matrix as is and it is just cleaner to keep
the matrix in the same order specified by the mov standard (which is
also explicitly described in the documentation).
In order to preserve compatibility, flip the angle sign in the display API
av_display_rotation_set() and av_display_rotation_get(), and improve the
documentation mentioning the rotation direction.
* commit 'e0046bc9c96150fa06146ace9093f06857dd7b23':
movenc: Write the make and model metadata keys for mov style files
Conflicts:
libavformat/movenc.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
These are essential allowing QuickTime to keep detecting content
as slow-motion - this allows preserving them on stream copy.
Signed-off-by: Martin Storsjö <martin@martin.st>
This commit has no known use case ATM as there are no unsupported video codecs in flv and could
theoretically be use to generate broken files allthough that would be not entirely easy as
tags/codecs still get sanity checked
This reverts commit 76f4b11780.
This allows stream copying video codecs before they are explicitly
supported. The same feature was in the past useful for audio codecs
in flv
This partly reverts the changes from 735ab7c5e0
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
7966 -> 7897 decicycles
This basically switches to the implementation from f6f7d15041
which seems faster
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
previously they where only updated when decoding started and would thus have
been inconsistent for a longer period of time leaving more chances for
problems
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'a12d3188cbec15e22070e139fa5cc541da07e2c3':
h264: use a smaller struct for the ref lists
Conflicts:
libavcodec/h264_direct.c
libavcodec/h264_mb.c
libavcodec/h264_picture.c
libavcodec/h264_refs.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '2b4c38d3c647f409080606ef02b3363ada00be2c':
h264: drop some mpegvideo remnants from draw_horiz_band()
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '5bf3c0fa49afd5bbf43aa841ff78007d72c80736':
h264: drop the now unused per-slice H264Contexts
Conflicts:
libavcodec/h264_slice.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '51d8725a6e4c7f989d6f0f38b59cb54a2d72846c':
h264: use the main H264Context as the parent for all slice contexts
Conflicts:
libavcodec/h264.c
libavcodec/h264.h
libavcodec/h264_slice.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '92e0b7342c0490894cbcea4461380321e0569de2':
h264_slice: constify all the uses of H264Context during slice decoding
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '582683b6ac798ed2a004a4e2121b7bd47892bbfd':
h264: move remaining ER stuff into the per-slice context
Conflicts:
libavcodec/h264.h
libavcodec/h264_picture.c
libavcodec/h264_slice.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '5bc69f38c1af71fbcbfb4b5efa77d0aeb5424c04':
error_resilience: do not require mbintra/skip tables
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '36d04801ba9d8622c2d759c172aea18561bac74d':
h264: move the scratch buffers into the per-slice context
Conflicts:
libavcodec/h264.h
libavcodec/h264_slice.c
libavcodec/svq3.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '34d4c605e9a5116d5289b35633ade5b01cacab24':
h264_loopfilter: constify all uses of H264Context
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '5c4b98de4d101ea715ef86847306a510afd0db0c':
h264.c: constify all uses of H264Context in slice and lower-level functions
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'f42485dbce614b3f63182845da43db690b427b7c':
h264: use a separate GetBitContext for slice data
Conflicts:
libavcodec/h264.c
libavcodec/h264_cavlc.c
libavcodec/h264_parser.c
libavcodec/h264_slice.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '2ea00e35e4e0b58f7a306dd55d8f72a21c32c946':
h264: do not abuse the context as a temporary storage in get_last_needed_nal()
Conflicts:
libavcodec/h264.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '404a416d4b1fcbf9db5569481d8181f296c01ea9':
h264: remove some remnants of data partitioning
Conflicts:
libavcodec/h264.c
libavcodec/h264_slice.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'a9b201cacf85d710b102010cb4baef97f00ea39b':
h264: move cabac_init_idc into the per-slice context
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'e6c90ce94f1b07f50cea2babf7471af455cca0ff':
h264: move loopfilter parameters into the per-slice context
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'bd3e460b73dd54a68dc253e010c239cefc8d8d55':
h264: move direct_cache into the per-slice context
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '5c8280c3075dd54f26752c3a1185647578421703':
h264: move last_qscale_diff into the per-slice context
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'e7226984ac13aacb84eae77a372df8ff7685848f':
h264: move [{top,left}_]cbp into the per-slice context
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '7747726667c86877feed30c9e18460cb8e63f551':
h264: move map_col_to_list0[_field] into the per-slice context
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'ee0d774dfa94655e44707ff3e02f4a4d282c1963':
h264: move dist_scale_factor[_field] into the per-slice context
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'be69f0a800903b7573b18d9287d18b2f368b8b11':
h264: move col_{parity,fieldoff} into the per-slice context
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '56febc993b928ccc039a32158ca60b234c311875':
h264: move the slice type variables into the per-slice context
Conflicts:
libavcodec/h264.c
libavcodec/h264_cabac.c
libavcodec/h264_cavlc.c
libavcodec/h264_slice.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '99a35d1ccbb6b6cd260ce5c8369a897a79fe6a3a':
h264: move neighbor_transform_size into the per-slice context
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '8b00f4df20f4a8ab0656fdaf7d00233a6515a052':
h264: move some neighbour information into the per-slice context
Conflicts:
libavcodec/h264_cabac.c
libavcodec/h264_cavlc.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '4bd5ac200d15b4f458a50f66006549825f9fc865':
h264: move {chroma,intra16x16}_pred_mode into the per-slice context
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '5355ed6b20e941430c4f8fb82644e87a65366d61':
h264: move {prev,next}_mb_skipped into the per-slice context
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'd231e84b06a9964c840cff4e228509f706165fb6':
h264: move the quantizers into the per-slice context
Conflicts:
libavcodec/dxva2_h264.c
libavcodec/h264_cavlc.c
libavcodec/h264_loopfilter.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'd40ae0e595fe90b5583b9269f8bb000402bde5a6':
h264: do not copy qscale when updating per-thread contexts
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Also change the method for allocating them. Instead of two possible
alloc calls from different places, just ensure they are allocated at the
start of each slice. This should be simpler and less bug-prone than the
previous method.
* commit '5127c00b971b674f72609369b39a9c0f7c36977d':
hevc: zero the correct variables on invalid crop parameters
Conflicts:
libavcodec/hevc_ps.c
See: 57e5812198
Merged-by: Michael Niedermayer <michaelni@gmx.at>
unsigned overflows are well defined in C and used for example in crypto
and various other places.
None of the affected warnings currently shown points to an actual defect
untested
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
In particular, add support for t, pos, n, r parameters, and add an eval
mode option.
Also, partially reword option documentation.
With several major edit by Stefano Sabatini.
Signed-off-by: Stefano Sabatini <stefasab@gmail.com>
* commit '30e6abd1a8cc4fd5daf2e23ad2e768862c39e975':
webp: ensure that each transform is only used once
See: c089e720c1
Merged-by: Michael Niedermayer <michaelni@gmx.at>
According to the WebP Lossless Bitstream Specification
"each transform is allowed to be used only once".
If a transform is more than once this can lead to memory
corruption.
Signed-off-by: Andreas Cadhalpun <Andreas.Cadhalpun@googlemail.com>
Signed-off-by: Anton Khirnov <anton@khirnov.net>
* commit '30a041887f89cd97c372ad6a516da6e012f2c88b':
ismindex: Calculate the pts duration of trun atoms, not the dts duration
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '67a2912307c3c08f2725ccae162cfe3426b80184':
movenc: Don't assume that fragment durations in pts is equal to duration in dts
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '5c337353a2546416631a87de4881850d99141c39':
movenc: Move sidx edit list timestamp adjustment into a block
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'eee13d653953083553cceadbbedf6222ef78a006':
movenc: Only adjust the cts offset at the start of fragments if necessary
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'b81b0cc22b22413760423e239ea644c9afdbfa2d':
movenc: Set the last packet duration based on the next packet when autoflushing
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '3041183677bda0a431b36e96a2c76617abaa8183':
dashenc: Heuristically fill in the duration of packets that need it
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '2889c5e16711770437f380f1bead5f72c6a0b17a':
movenc: Heuristically set the duration of the last sample in a fragment if not set
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Since the duration is compared to the tfra durations/intervals which
are expressed in pts, calculate that here as well.
Signed-off-by: Martin Storsjö <martin@martin.st>
For strict CFR, they should be pretty much equal, but if the stream
is VFR, there can be a sometimes significant difference.
Calculate the pts duration separately, used in sidx atoms and for
tfrf/tfxd boxes in smooth streaming ismv files.
Also make sure to reduce the duration of sidx entries according to
edit lists.
Signed-off-by: Martin Storsjö <martin@martin.st>
Adjusting it is only necessary when a sidx/tfrf/tfxd atom already has
been written for the previous fragment (since the sidx/tfrf/tfxd atoms
include the duration between the first pts of the previous fragment, to
the first pts of the new fragment).
Signed-off-by: Martin Storsjö <martin@martin.st>
When automatically flushing fragments based on set conditions
(fragmentation on keyframes, after some interval or byte size),
we already have the next packet for one stream - use this for setting
the duration of the last packet in the flushed fragment correctly.
This avoids having to adjust the timestamp of the first packet in
the new fragment since the last duration was unknown.
Unfortunately, this only works for automatic flushing (not for
caller-triggered flushing, like in the dash muxer), and only for the
one single track that triggered the flushing. The duration of the
last sample in all other tracks still is dependent on AVPacket
duration (or heuristics).
Signed-off-by: Martin Storsjö <martin@martin.st>
This avoids that the mp4 muxer does a similar heuristic, adjusting
the timestamps in a way that the dash muxer doesn't know the actual
timestamps written to the file in the end. By making sure that the
mp4 muxer internal heuristic isn't applied, we know the exact
timestamps written to file, so that the timestamps in manifest match
the files.
Signed-off-by: Martin Storsjö <martin@martin.st>
Even if this is a guess, it is way better than writing a zero duration
of the last sample in a fragment (because if the duration is zero,
the first sample of the next fragment will have the same timestamp
as the last sample in the previous one).
Since we normally don't require libavformat muxer users to set
the duration field in AVPacket, we probably can't strictly require
it here either, so don't log this as a strict warning, only as info.
Signed-off-by: Martin Storsjö <martin@martin.st>
Add a missing AVClass member, check whether localaddr is null.
(Previously, localaddr was always a local stack buffer, while it
now also can be an avoption string which can be null.)
This fixes crashes when not passing any localaddr parameter, since
66028b7ba.
Signed-off-by: Martin Storsjö <martin@martin.st>
* cehoyos/master:
lavf/mkv: Ignore ff_isom_write_hvcc() return value as the mov muxer does.
lavc/dts: Do not set bitrate for DTS-HD Master and High Resolution.
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Commit dfa9208074 ("mips/float_dsp: fix a bug in vector_fmul_window_mips")
fixed vector_fmul_window_mips by unrolling the loop only 4 times, but also
removed the outer C loop and replaced it with assembly branches and pointer
arithmetic. When submitting my 64-bit porting patch I missed this new
assembly which also needed porting.
This patch fixes a bus error in the fate-float-dsp test when run on 64-bit
mips.
Signed-off-by: James Cowgill <james410@cowgill.org.uk>
Reviewed-by: Nedeljko Babic <nedeljko.babic@imgtec.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
The current behavior may produce a different sequence of packets
after seeking, compared to demuxing linearly from the beginning.
This is because the MOV demuxer seeks in each stream individually,
based on timestamp, which may set each stream at a slightly different
position than if the file would have been read sequentially.
This makes implementing certain operations, such as segmenting,
quite hard, and slower than need be.
Therefore, add an option which retains the same packet sequence
after seeking, as when a file is demuxed linearly.
The current behavior may produce a different sequence of packets
after seeking, compared to demuxing linearly from the beginning.
This is because the MOV demuxer seeks in each stream individually,
based on timestamp, which may set each stream at a slightly different
position than if the file would have been read sequentially.
This makes implementing certain operations, such as segmenting,
quite hard, and slower than need be.
Therefore, add an option which retains the same packet sequence
after seeking, as when a file is demuxed linearly.
This is a variant of showwaves. It is implemented as a different filter
so that the user is not allowed to use meaningless options which belong
to showwaves (such as rate).
Major edits done by Stefano Sabatini, from a patch by ubitux.
See thread:
From: Clément Bœsch <u@pkh.me>
To: ffmpeg-devel@ffmpeg.org
Date: Wed, 24 Dec 2014 15:03:26 +0100
Subject: [FFmpeg-devel] [PATCH] avfilter/showwaves: add single_pic option
* commit '58a840e21577a2168843487a98cb2cea44b5a94a':
Replace a few leftover instances of enum PixelFormat with enum AVPixelFormat
See: ac627b3d38
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'cdce9e8025fff1dee2fd3d6bc28aebc0a330c5a0':
aacsbr: Fix type for index variable
See: a15adabdd3
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '4326bc364b58e97fc3d89417054a6b7610179a00':
lavf: Do not list mov-only codecs in riff tags
Conflicts:
libavformat/Makefile
libavformat/avidec.c
See: 2e0b5f5c90
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'c9ed48e80ef807ab0c1bb946ac8db5f34d83d9c9':
dca: Read params->pancABIT0[param_index] only if part0 is set
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Set this field to TRUE if the audio component is to operate on
little-endian data, and FALSE otherwise.
However TRUE and FALSE are not defined. Since this flag is just a boolean,
interpret all values except for 0 as little endian.
Sample-Id: 64bit_FLOAT_Little_Endian.mov
Instead check for all mov code-points when demuxing avi
and print a warning if a video codec is found like this.
Signed-off-by: Vittorio Giovara <vittorio.giovara@gmail.com>
Real world MMX code does not put EMMS at the start and end of every function,
it would be incredibly inefficient to do that
thus do not warn about that
Tested-by: Carl Eugen Hoyos <cehoyos@ag.or.at>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'f01c77157789b8e3a59ed2c9646faf8299e41641':
fate: add explicit support for the toolchain configure option
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'a9d60c390f35f3954821bd635fd31bbb5036b29d':
doc: fate: remove outdated SSH key fingerprint
Conflicts:
doc/fate.texi
Not merged, this does not apply to our servers
Merged-by: Michael Niedermayer <michaelni@gmx.at>
This is incompatible with the omit_tfhd_offset flag (writing
position independent fragments with interleaving requires the
default_base_moof flag).
This makes the moof atoms slightly bigger, but can be better for
playback (improving locality of sample data in the mdat).
Signed-off-by: Martin Storsjö <martin@martin.st>
This is needed if all the data for one track isn't continuous
within the mdat. Normally we make sure all the data for one
track is continuous, but in new cases we will need to have
the samples interleaved.
Signed-off-by: Martin Storsjö <martin@martin.st>
* commit '66a0ac0a802dd794acc1ab8559d3db9e98755b57':
mkv: Add support for DVB subtitles
See: 4789c25d83
Merged-by: Michael Niedermayer <michaelni@gmx.at>
as this kind of allows to circumvent it to some extend.
We also could add a separate parameter or value to choose this
Found-by: ramiro
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* commit '9a60b1fad02cb783b895b2145c3dafc01f7b337c':
libswscale: fix compiler warnings enumerated type mixed with another type
Conflicts:
libswscale/swscale_unscaled.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'acbe15a99f158dbb0edb837fb6557171dc4376d4':
fate: Add test for DCA XLL
Conflicts:
tests/fate/audio.mak
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '4da5aacc7eba274a4f18411120de539d39c5151e':
dca: Mark syncword constants unsigned; they do not fit in 32-bit signed int
Merged-by: Michael Niedermayer <michaelni@gmx.at>
This is the remaining error, the output on the SPX samples,
respectively csi_miami_stereo_128_spx.eac3 and
csi_miami_5.1_256_spx.eac3, goes from:
stddev: 8.71 PSNR: 77.52 MAXDIFF: 235
stddev:24270.51 PSNR: 22.17 MAXDIFF:47166
to:
stddev: 0.12 PSNR:114.12 MAXDIFF: 1
stddev: 0.12 PSNR:114.73 MAXDIFF: 1
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
When the decoder is deactivated, the x86-optimized versions are
not compiled, resulting in a link error.
The C version is unaffected, as it is part of the idctdsp
subsystem.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
The AC3DecodeContext has a float (USE_FIXED=0) and an integer
(USE_FIXED=1) variant, both of which can be present in the same binary.
This is not only very confusing, but it also breaks horribly, when one
variant is used by code expecting the other.
This currently happens, because eac3dec.c is only compiled for the float
variant, but also used from ac3dec_fixed.c, which uses the integer
variant.
The result is memory corruption, leading to crashes.
So compile eac3dec.c once for each variant and adapt it, so that it
works with the integer variant.
A loss of precission and scaling bug has been fixed by the committer
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* commit '5a0e953c2465be9d449d5f523c3d3e2b886910b2':
mjpeg: Mark decoder family as thread safe
Conflicts:
libavcodec/mjpegbdec.c
libavcodec/mjpegdec.c
libavcodec/mxpegdec.c
libavcodec/sp5xdec.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
No global variables are used and the VLC tables are allocated without
static elements. This will allow using a JPEG decoding context within
other decoders.
This field is designed for marking codec properties useful to lavc internals.
Two internal capabilities are added:
- FF_CODEC_CAP_INIT_THREADSAFE: codec can be opened without locks;
- FF_CODEC_CAP_INIT_CLEANUP: codec frees memory if initialization fails.
Instead check for all mov code-points when demuxing avi
and print a warning if a video codec is found like this.
Fixes a regression similar to the one described in ticket #4307.
The main difference consists in renaming properly labels, and
letting yasm select the gprs for skipping 1D transforms.
Previous-version-reviewed-by: James Almer <jamrial@gmail.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* commit '78c892284150e12f6b08b287bdf7e62307c6985f':
dca: Document the permuted order in the lfe_fir_64 and lfe_fir_128 tables
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Unfortunately android < api 21 (lollipop) doesn't have the sgidefs.h header,
the easiest way around this is to just use the preprocessor definitions from
gcc / clang.
Signed-off-by: James Cowgill <james410@cowgill.org.uk>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* commit '9c8074050745184a61059ad56045ad711299e33d':
configure: Mark qsv subsystem as not selectable on the command line
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '67142a8c721c7916c9ad2eb439c14d567aeb88c1':
roqvideoenc: set enc->avctx in roq_encode_init
See: cf82c426fa
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '212556cd2144659dc6b9d121ddb38cd272bd10ae':
qsv: Improve the log message of when initializing MFX_IMPL_HARDWARE{2, 3, 4}
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'bacc92b59bfa5d6a1f631e63e46fc1d2fb934e51':
rtpdec_vp9: Drop extra sanity check for size of input packet
Merged-by: Michael Niedermayer <michaelni@gmx.at>
So far it is only set in roq_encode_frame, but it is used in
roq_encode_end to free the coded_frame. This currently segfaults if
roq_encode_frame is not called between roq_encode_init and
roq_encode_end.
CC:libav-stable@libav.org
Signed-off-by: Andreas Cadhalpun <Andreas.Cadhalpun@googlemail.com>
Signed-off-by: Anton Khirnov <anton@khirnov.net>
* commit '9272c965d9559a90ee64d46aebd99c117e07f7a3':
matroskaenc: Fix type used for chapter timestamps
Conflicts:
libavformat/matroskaenc.c
See: a4cd057bc7
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'dc2d0e06af459af9a7f91b65e0a3119acc4f1baa':
mlpdec: support TrueHD streams with an Atmos substream
See: 36bf549b27
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'f36f6a608b5b2c17f8876195c61621c8f8607cee':
mlpdec: support major sync headers with optional extension blocks
See: ff34b2d6d3
Merged-by: Michael Niedermayer <michaelni@gmx.at>
In this case len is always at least 1, since it is checked against
RTP_VP9_DESC_REQUIRED_SIZE + 1 and then it is reduced by
RTP_VP9_DESC_REQUIRED_SIZE before entering the has_pic_id check.
Bug-Id: CID 1270811
Also moves the shift out of the inner loop
Found-by: Clang -fsanitize=shift
Reported-by: Thierry Foucu <tfoucu@google.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
This also simplifies the code
Found-by: Clang -fsanitize=shift
Reported-by: Thierry Foucu <tfoucu@google.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
The fourth substream is being discarded, since its not raw audio data,
but an encoded Atmos stream which needs a specialized decoder.
Fixes decoding of the true hd stream from Transformers\ -\ Age\ of\ Extinction\ 2014\ 1080P-003.mkv
Signed-off-by: Anton Khirnov <anton@khirnov.net>
libssh provides a function for parsing ~/.ssh/config for ssh connection parameters like user, hostname, identity file
and port. This patch makes ffmpeg use this function to take parameters from the config file for everything that's not
explicitely set in the url. It also supports host aliases, i.e. using a shorthand in the url and replacing it with the
hostname / IP address specified for the shorthand in the config file.
Signed-off-by: Florian Jacob <projects+ffmpeg@florianjacob.de>
Signed-off-by: Lukasz Marek <lukasz.m.luki2@gmail.com>
* commit '448c8cfe4c53e9e806effd8505b46d57fa707061':
movenc: Support setting fragment_index before the moov atom is written
Conflicts:
libavformat/movenc.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '0c5e380c2c266d2e8a13c000cc527529db837f10':
movenc: Don't rely on the fragment index for vc1 info gathering
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'cf402d6fa88acd647cdff993429583bec8a34fdc':
rtpenc_mpegts: Set chain->rtp_ctx only after avformat_write_header succeeded
Reviewed-by: Andreas Cadhalpun <andreas.cadhalpun@googlemail.com>
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'c83dd2d2a458075a58895c384372f57c1ec26276':
rtpenc_mpegts: Free the right ->pb in the error path in the init function
Reviewed-by: Andreas Cadhalpun <andreas.cadhalpun@googlemail.com>
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'dc7536ca3d2dbe47f40cc0fcd0fc2555a84d5f56':
avconv: do not abort immediately if initializing hwaccel fails
Merged-by: Michael Niedermayer <michaelni@gmx.at>
This way, the caller doesn't need to coordinate setting the option
after the moov atom has been written. The downside is that it is
no longer possible to use the option for checking whether the moov
atom already has been written, but a caller is able to keep track
of that by other means anyway.
Signed-off-by: Martin Storsjö <martin@martin.st>
The previous use of the mov->fragments field, for determining whether
written packets were part of the first fragment or not, didn't
work as intended when using the empty_moov flag.
Signed-off-by: Martin Storsjö <martin@martin.st>
By making sure we at each time only have one pointer set, either a
local variable or one in the context, we avoid potential double frees
in the cleanup routines. If chain->rtp_ctx is set, it is closed by
calling avformat_write_trailer, but that shouldn't be called unless
avformat_write_header succeeded.
This issue was pointed out by Andreas Cadhalpun.
Signed-off-by: Martin Storsjö <martin@martin.st>
So far it is only set in roq_encode_frame, but it is used in
roq_encode_end to free the coded_frame. This currently segfaults if
roq_encode_frame is not called between roq_encode_init and
roq_encode_end.
Signed-off-by: Andreas Cadhalpun <Andreas.Cadhalpun@googlemail.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* commit '93f7948136fcda8ddbbc44a6c24418f11ca829b8':
libvpx: Fix mixed use of av_malloc() and av_reallocp()
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'ad94c6ca0b86c463f476b26606259a2041dcddc9':
siff: Use the correct type for packet size variables
Conflicts:
libavformat/siff.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'bfeb83a8b7d3fcf09a54d8dbc9c521e10bb17530':
rtpdec_hevc: Drop extra sanity check for size of input packet
Merged-by: Michael Niedermayer <michaelni@gmx.at>
allowing access to the size but not the extradata itself is not useful
and could lead to potential problems if writing happens through this field
Reviewed-by: Andreas Cadhalpun <andreas.cadhalpun@googlemail.com>
Reviewed-by: Lukasz Marek <lukasz.m.luki2@gmail.com>
Reviewed-by: Nicolas George <george@nsup.org>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
If resyncing leads to the same position as previously, it will again
lead to a resync attempt, resulting in an infinite loop.
Thus don't seek back beyond the last syncpoint.
Signed-off-by: Andreas Cadhalpun <Andreas.Cadhalpun@googlemail.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
In this case len is always at least 3, since it is checked against
RTP_HEVC_PAYLOAD_HEADER_SIZE + 1 before entering the switch block.
Bug-Id: CID 1238784
* commit '46d4d8575979a24a8d026d9805039b724e0e3e5f':
movenc: Avoid writing separate flags for the first sample if not necessary
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '00d751d4fc20ec88d2cc2c9f39ec8b9e9c8cdeba':
movenc: Set tfhd default sample flags based on actual samples, if possible
Merged-by: Michael Niedermayer <michaelni@gmx.at>
This avoids assuming that e.g. audio samples are marked as
sync samples.
This allows omitting the sample flags from trun, if the default
flags happen to be right for all the samples.
Signed-off-by: Martin Storsjö <martin@martin.st>
If EOF is reached, while skipping bytes, avio_tell(pb) won't change
anymore, resulting in an infinite loop.
Signed-off-by: Andreas Cadhalpun <Andreas.Cadhalpun@googlemail.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
They are used in a switch statement, but it is not guaranteed that the
COMM case (where they are set to 0) is reached before the other cases.
Signed-off-by: Andreas Cadhalpun <Andreas.Cadhalpun@googlemail.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* commit '0ce3a0f9d9523a9bcad4c6d451ca5bbd7a4f420d':
utvideodec: Handle slice_height being zero
See: 3881606240
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'ae5e1f3d663a8c9a532d89e588cbc61f171c9186':
tiff: Check that there is no aliasing in pixel format selection
See: e1c0cfaa41
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '6448f15af02f2c3cf0df8cb8237957e426041f2d':
mxfdec: Fix the error handling for when strftime fails
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '5f5b78aca35d07c771f5c4c73a984be9fe04a0b8':
xcbgrab: Free the host string after checking the connection
Conflicts:
libavdevice/xcbgrab.c
No change as the bug was not in FFmpeg
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '0025f7408a0fab2cab4a950064e4784a67463994':
vorbis: Check the vlc value in setup_classifs
Conflicts:
libavcodec/vorbisdec.c
See: ae038c0914
See: 709cae2bcb
Merged-by: Michael Niedermayer <michaelni@gmx.at>
The valid returned values are always at most 11bit.
Remove the previous check that assumed larger values plausible and
use a signed integer to check get_vlc2 return values.
CC: libav-stable@libav.org
Use correct context, reduce log level, don't assume it is a video stream,
and print the tag of the unknown stream.
Signed-off-by: Vittorio Giovara <vittorio.giovara@gmail.com>
Fixes out of array access
Fixes: ffmpeg_opus_crash1.ogg
This solution is likely not optimal in terms of error concealment but
its simple and fixes the out of array access.
Found-by: Thomas Lindroth <thomas.lindroth@gmail.com>
Tested-by: Thomas Lindroth <thomas.lindroth@gmail.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
This is safer than to assume that all error pathes cleared them and
nothing will use uncleared pointers.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'b77e335e441040a40fc6156b8e4a134745d10233':
configure: Move the .object_arch check to the right place
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'dcae2e32f7d8a1ca5fb8c1e4aa81313be854dd73':
arm: Suppress tags about used cpu arch and extensions
Merged-by: Michael Niedermayer <michaelni@gmx.at>
When all the codepaths using manually set .arch/.fpu code is
behind runtime detection, the elf attributes should be suppressed.
This allows tools to know that the final built binary doesn't
strictly require these extensions.
Signed-off-by: Martin Storsjö <martin@martin.st>
* commit 'cecf45b2bfbb85e9e59f355428fbd4d8cbc652a8':
doc: Add -list_formats all example for video4linux2
Conflicts:
doc/indevs.texi
Merged-by: Michael Niedermayer <michaelni@gmx.at>
a876585215 had the unintended side effect of returning AVERROR(ENOMEM)
when track->entry is zero, while the code intentionally wants to
continue in that case.
Signed-off-by: Martin Storsjö <martin@martin.st>
2015-03-06 16:17:48 +02:00
2970 changed files with 269714 additions and 62119 deletions
Some files were not shown because too many files have changed in this diff
Show More
Reference in New Issue
Block a user
Blocking a user prevents them from interacting with repositories, such as opening or commenting on pull requests or issues. Learn more about blocking a user.
