Add CVE number.

see a client hello.

.cvsignore

@@ -11,8 +11,10 @@ maketest.log
 cctest
 cctest.c
 cctest.a
-libcrypto.so.*
-libssl.so.*
 *.flc
 semantic.cache
 Makefile
+*.so*
+*.dll*
+*.sl*
+*.dylib*

ChangeLog.0_9_7-stable_not-in-head

@@ -1,213 +0,0 @@
-This file, together with ChangeLog.0_9_7-stable_not-in-head_FIPS,
-provides a collection of those CVS change log entries for the
-0.9.7 branch (OpenSSL_0_9_7-stable) that do not appear similarly in
-0.9.8-dev (CVS head).
-    
-ChangeLog.0_9_7-stable_not-in-head_FIPS  -  "FIPS" related changes
-ChangeLog.0_9_7-stable_not-in-head       -  everything else
-
-Some obvious false positives have been eliminated: e.g., we do not
-care about a simple "make update"; and we don't care about changes
-identified to the 0.9.7 branch that were explicitly identified as
-backports from head.
-    
-Eliminating all other entries (and finally this file and its
-compantion), either as false positives or as things that should go
-into 0.9.8, remains to be done.  Any additional changes to 0.9.7 that
-are not immediately put into 0.9.8, but belong there as well, should
-be added to the end of this file.
-
-
-2002-11-04 17:33  levitte
-
-	Changed:
-		Configure (1.314.2.38), "Exp", lines: +4 -2
-
-	Return my normal debug targets to something not so extreme, and
-	make the extreme ones special (or 'extreme', if you will :-)).
-
-2002-12-16 19:17  appro
-
-	Changed:
-		crypto/bn/bn_lcl.h (1.23.2.3), "Exp", lines: +3 -0
-		crypto/bn/bn_mul.c (1.28.2.4), "Exp", lines: +84 -445
-
-	This is rollback to 0.9.6h bn_mul.c to address problem reported in
-	RT#272.
-
-2003-07-27 15:46  ben
-
-	Changed:
-		crypto/aes/aes.h (1.1.2.5), "Exp", lines: +3 -0
-		crypto/aes/aes_cfb.c (1.1.2.4), "Exp", lines: +57 -0
-
-	Add untested CFB-r mode. Will be tested soon.
-
-2003-07-28 17:07  ben
-
-	Changed:
-		Makefile.org (1.154.2.69), "Exp", lines: +5 -1
-		crypto/aes/aes.h (1.1.2.6), "Exp", lines: +3 -0
-		crypto/aes/aes_cfb.c (1.1.2.5), "Exp", lines: +19 -0
-		crypto/dsa/Makefile.ssl (1.49.2.6), "Exp", lines: +3 -2
-		crypto/err/Makefile.ssl (1.48.2.4), "Exp", lines: +17 -16
-		crypto/evp/e_aes.c (1.6.2.5), "Exp", lines: +8 -0
-		crypto/evp/e_des.c (1.5.2.2), "Exp", lines: +1 -1
-		crypto/evp/e_des3.c (1.8.2.3), "Exp", lines: +2 -2
-		crypto/evp/evp.h (1.86.2.11), "Exp", lines: +28 -11
-		crypto/evp/evp_locl.h (1.7.2.3), "Exp", lines: +2 -2
-		crypto/objects/obj_dat.h (1.49.2.13), "Exp", lines: +10 -5
-		crypto/objects/obj_mac.h (1.19.2.13), "Exp", lines: +5 -0
-		crypto/objects/obj_mac.num (1.15.2.9), "Exp", lines: +1 -0
-		crypto/objects/objects.txt (1.20.2.14), "Exp", lines: +4 -0
-		fips/Makefile.ssl (1.1.2.3), "Exp", lines: +7 -0
-		fips/aes/Makefile.ssl (1.1.2.2), "Exp", lines: +23 -1
-		fips/aes/fips_aesavs.c (1.1.2.3), "Exp", lines: +9 -1
-		test/Makefile.ssl (1.84.2.30), "Exp", lines: +101 -43
-
-	Add support for partial CFB modes, make tests work, update
-	dependencies.
-
-2003-07-29 12:56  ben
-
-	Changed:
-		crypto/aes/aes_cfb.c (1.1.2.6), "Exp", lines: +9 -6
-		crypto/evp/c_allc.c (1.8.2.3), "Exp", lines: +1 -0
-		crypto/evp/evp_test.c (1.14.2.11), "Exp", lines: +17 -8
-		crypto/evp/evptests.txt (1.9.2.2), "Exp", lines: +48 -1
-
-	Working CFB1 and test vectors.
-
-2003-07-29 15:24  ben
-
-	Changed:
-		crypto/evp/e_aes.c (1.6.2.6), "Exp", lines: +14 -0
-		crypto/objects/obj_dat.h (1.49.2.14), "Exp", lines: +15 -5
-		crypto/objects/obj_mac.h (1.19.2.14), "Exp", lines: +10 -0
-		crypto/objects/obj_mac.num (1.15.2.10), "Exp", lines: +2 -0
-		crypto/objects/objects.txt (1.20.2.15), "Exp", lines: +2 -0
-		fips/aes/Makefile.ssl (1.1.2.3), "Exp", lines: +1 -1
-		fips/aes/fips_aesavs.c (1.1.2.4), "Exp", lines: +34 -19
-
-	The rest of the keysizes for CFB1, working AES AVS test for CFB1.
-
-2003-07-29 19:05  ben
-
-	Changed:
-		crypto/aes/aes.h (1.1.2.7), "Exp", lines: +3 -0
-		crypto/aes/aes_cfb.c (1.1.2.7), "Exp", lines: +14 -0
-		crypto/evp/c_allc.c (1.8.2.4), "Exp", lines: +1 -0
-		crypto/evp/e_aes.c (1.6.2.7), "Exp", lines: +4 -9
-		crypto/evp/evptests.txt (1.9.2.3), "Exp", lines: +48 -0
-		crypto/objects/obj_dat.h (1.49.2.15), "Exp", lines: +20 -5
-		crypto/objects/obj_mac.h (1.19.2.15), "Exp", lines: +15 -0
-		crypto/objects/obj_mac.num (1.15.2.11), "Exp", lines: +3 -0
-		crypto/objects/objects.txt (1.20.2.16), "Exp", lines: +3 -0
-		fips/aes/fips_aesavs.c (1.1.2.7), "Exp", lines: +11 -0
-
-	AES CFB8.
-
-2003-07-30 20:30  ben
-
-	Changed:
-		Makefile.org (1.154.2.70), "Exp", lines: +16 -5
-		crypto/des/cfb_enc.c (1.7.2.1), "Exp", lines: +2 -1
-		crypto/des/des_enc.c (1.11.2.2), "Exp", lines: +4 -0
-		crypto/evp/e_aes.c (1.6.2.8), "Exp", lines: +7 -14
-		crypto/evp/e_des.c (1.5.2.3), "Exp", lines: +37 -1
-		crypto/evp/evp.h (1.86.2.12), "Exp", lines: +6 -0
-		crypto/evp/evp_locl.h (1.7.2.4), "Exp", lines: +9 -0
-		crypto/objects/obj_dat.h (1.49.2.16), "Exp", lines: +48 -23
-		crypto/objects/obj_mac.h (1.19.2.16), "Exp", lines: +31 -6
-		crypto/objects/obj_mac.num (1.15.2.12), "Exp", lines: +5 -0
-		crypto/objects/objects.txt (1.20.2.17), "Exp", lines: +12 -6
-		fips/Makefile.ssl (1.1.2.4), "Exp", lines: +8 -1
-		fips/fips_make_sha1 (1.1.2.3), "Exp", lines: +3 -0
-		fips/aes/Makefile.ssl (1.1.2.4), "Exp", lines: +1 -1
-		fips/des/.cvsignore (1.1.2.1), "Exp", lines: +3 -0
-		fips/des/Makefile.ssl (1.1.2.1), "Exp", lines: +96 -0
-		fips/des/fingerprint.sha1 (1.1.2.1), "Exp", lines: +2 -0
-		fips/des/fips_des_enc.c (1.1.2.1), "Exp", lines: +288 -0
-		fips/des/fips_des_locl.h (1.1.2.1), "Exp", lines: +428 -0
-		fips/des/fips_desmovs.c (1.1.2.1), "Exp", lines: +659 -0
-
-	Whoops, forgot FIPS DES, also add EVPs for DES CFB1 and 8.
-
-2003-07-31 23:30  levitte
-
-	Changed:
-		Makefile.org (1.154.2.71), "Exp", lines: +2 -0
-
-	If FDIRS is to be treated like SDIRS, let's not forget to
-	initialize it in Makefile.org.
-
-2003-08-01 12:25  ben
-
-	Changed:
-		crypto/des/cfb_enc.c (1.7.2.2), "Exp", lines: +45 -36
-		crypto/evp/c_allc.c (1.8.2.5), "Exp", lines: +2 -0
-		crypto/evp/e_des.c (1.5.2.4), "Exp", lines: +8 -3
-		crypto/evp/evptests.txt (1.9.2.4), "Exp", lines: +6 -0
-
-	Fix DES CFB-r.
-
-2003-08-01 12:31  ben
-
-	Changed:
-		crypto/evp/evptests.txt (1.9.2.5), "Exp", lines: +4 -0
-
-	DES CFB8 test.
-
-2004-05-12 16:11  ben
-
-	Changed:
-		crypto/rand/rand.h (1.26.2.8), "Exp", lines: +2 -0
-		crypto/rand/rand_err.c (1.6.2.4), "Exp", lines: +2 -0
-		fips/fingerprint.sha1 (1.1.2.5), "Exp", lines: +1 -1
-		fips/fips.c (1.1.2.4), "Exp", lines: +5 -1
-		fips/rand/fingerprint.sha1 (1.1.2.5), "Exp", lines: +1 -1
-		fips/rand/fips_rand.c (1.1.2.5), "Exp", lines: +29 -0
-
-	Blow up in people's faces if they don't reseed.
-
-2004-06-21 20:05  levitte
-
-	Changed:
-		Makefile.org (1.154.2.82), "Exp", lines: +3 -1
-
-	Standard sh doesn't tolerate ! as part of the conditional command.
-
-		PR: 900
-
-2004-08-02 16:15  levitte [FIPS]
-
-	Changed:
-		crypto/cryptlib.c (1.32.2.13), "Exp", lines: +4 -4
-
-	Let's lock a write lock when changing values, shall we?
-
-		Thanks to Dr Stephen Henson <shenson@drh-consultancy.co.uk>
-	for making me aware of this error.
-
-2005-03-15 10:46  appro [FIPS]
-
-	Changed:
-		Makefile.org (1.154.2.96), "Exp", lines: +1 -1
-		crypto/Makefile (1.1.4.6), "Exp", lines: +2 -3
-		fips/Makefile (1.1.4.8), "Exp", lines: +4 -1
-
-	Real Bourne shell doesn't accept ! as in "if ! grep ..." Fix this
-	in crypto/Makefile and make Makefile.org and fips/Makefile more
-	discreet.
-
-2005-04-19 16:21  appro
-
-	Changed:
-		Configure (1.314.2.117), "Exp", lines: +24 -21
-		Makefile.org (1.154.2.100), "Exp", lines: +1 -11
-		TABLE (1.99.2.52), "Exp", lines: +20 -20
-		apps/Makefile (1.1.4.15), "Exp", lines: +1 -1
-		test/Makefile (1.1.4.12), "Exp", lines: +1 -1
-
-	Enable shared link on HP-UX.
-

FAQ

@@ -31,6 +31,9 @@ OpenSSL  -  Frequently Asked Questions
 * Why does my browser give a warning about a mismatched hostname?
 * How do I install a CA certificate into a browser?
 * Why is OpenSSL x509 DN output not conformant to RFC2253?
+* What is a "128 bit certificate"? Can I create one with OpenSSL?
+* Why does OpenSSL set the authority key identifier extension incorrectly?
+* How can I set up a bundle of commercial root CA certificates?
 
 [BUILD] Questions about building and testing OpenSSL
 
@@ -46,6 +49,9 @@ OpenSSL  -  Frequently Asked Questions
 * Why does the OpenSSL test suite fail on MacOS X?
 * Why does the OpenSSL test suite fail in BN_sqr test [on a 64-bit platform]?
 * Why does OpenBSD-i386 build fail on des-586.s with "Unimplemented segment type"?
+* Why does the OpenSSL test suite fail in sha512t on x86 CPU?
+* Why does compiler fail to compile sha512.c?
+* Test suite still fails, what to do?
 
 [PROG] Questions about programming with OpenSSL
 
@@ -62,6 +68,8 @@ OpenSSL  -  Frequently Asked Questions
 * Why doesn't my server application receive a client certificate?
 * Why does compilation fail due to an undefined symbol NID_uniqueIdentifier?
 * I think I've detected a memory leak, is this a bug?
+* Why does Valgrind complain about the use of uninitialized data?
+* Why doesn't a memory BIO work when a file does?
 
 ===============================================================================
 
@@ -70,7 +78,7 @@ OpenSSL  -  Frequently Asked Questions
 * Which is the current version of OpenSSL?
 
 The current version is available from <URL: http://www.openssl.org>.
-OpenSSL 0.9.7g was released on April 11, 2005.
+OpenSSL 0.9.8l was released on Nov 5th, 2009.
 
 In addition to the current stable release, you can also access daily
 snapshots of the OpenSSL development version at <URL:
@@ -141,8 +149,8 @@ less Unix-centric, it might have been used much earlier.
 
 With version 0.9.6 OpenSSL was extended to interface to external crypto
 hardware. This was realized in a special release '0.9.6-engine'. With
-version 0.9.7 (not yet released) the changes were merged into the main
-development line, so that the special release is no longer necessary.
+version 0.9.7 the changes were merged into the main development line,
+so that the special release is no longer necessary.
 
 * How do I check the authenticity of the OpenSSL distribution?
 
@@ -384,6 +392,76 @@ interface, the "-nameopt" option could be introduded. See the manual
 page of the "openssl x509" commandline tool for details. The old behaviour
 has however been left as default for the sake of compatibility.
 
+* What is a "128 bit certificate"? Can I create one with OpenSSL?
+
+The term "128 bit certificate" is a highly misleading marketing term. It does
+*not* refer to the size of the public key in the certificate! A certificate
+containing a 128 bit RSA key would have negligible security.
+
+There were various other names such as "magic certificates", "SGC
+certificates", "step up certificates" etc.
+
+You can't generally create such a certificate using OpenSSL but there is no
+need to any more. Nowadays web browsers using unrestricted strong encryption
+are generally available.
+
+When there were tight restrictions on the export of strong encryption
+software from the US only weak encryption algorithms could be freely exported
+(initially 40 bit and then 56 bit). It was widely recognised that this was
+inadequate. A relaxation of the rules allowed the use of strong encryption but
+only to an authorised server.
+
+Two slighly different techniques were developed to support this, one used by
+Netscape was called "step up", the other used by MSIE was called "Server Gated
+Cryptography" (SGC). When a browser initially connected to a server it would
+check to see if the certificate contained certain extensions and was issued by
+an authorised authority. If these test succeeded it would reconnect using
+strong encryption.
+
+Only certain (initially one) certificate authorities could issue the
+certificates and they generally cost more than ordinary certificates.
+
+Although OpenSSL can create certificates containing the appropriate extensions
+the certificate would not come from a permitted authority and so would not
+be recognized.
+
+The export laws were later changed to allow almost unrestricted use of strong
+encryption so these certificates are now obsolete.
+
+
+* Why does OpenSSL set the authority key identifier (AKID) extension incorrectly?
+
+It doesn't: this extension is often the cause of confusion.
+
+Consider a certificate chain A->B->C so that A signs B and B signs C. Suppose
+certificate C contains AKID.
+
+The purpose of this extension is to identify the authority certificate B. This
+can be done either by including the subject key identifier of B or its issuer
+name and serial number.
+
+In this latter case because it is identifying certifcate B it must contain the
+issuer name and serial number of B.
+
+It is often wrongly assumed that it should contain the subject name of B. If it
+did this would be redundant information because it would duplicate the issuer
+name of C.
+
+
+* How can I set up a bundle of commercial root CA certificates?
+
+The OpenSSL software is shipped without any root CA certificate as the
+OpenSSL project does not have any policy on including or excluding
+any specific CA and does not intend to set up such a policy. Deciding
+about which CAs to support is up to application developers or
+administrators.
+
+Other projects do have other policies so you can for example extract the CA
+bundle used by Mozilla and/or modssl as described in this article:
+
+  http://www.mail-archive.com/modssl-users@modssl.org/msg16980.html
+
+
 [BUILD] =======================================================================
 
 * Why does the linker complain about undefined symbols?
@@ -598,6 +676,35 @@ Reportedly elder *BSD a.out platforms also suffer from this problem and
 remedy should be same. Provided binary is statically linked and should be
 working across wider range of *BSD branches, not just OpenBSD.
 
+* Why does the OpenSSL test suite fail in sha512t on x86 CPU?
+
+If the test program in question fails withs SIGILL, Illegal Instruction
+exception, then you more than likely to run SSE2-capable CPU, such as
+Intel P4, under control of kernel which does not support SSE2
+instruction extentions. See accompanying INSTALL file and
+OPENSSL_ia32cap(3) documentation page for further information.
+
+* Why does compiler fail to compile sha512.c?
+
+OpenSSL SHA-512 implementation depends on compiler support for 64-bit
+integer type. Few elder compilers [ULTRIX cc, SCO compiler to mention a
+couple] lack support for this and therefore are incapable of compiling
+the module in question. The recommendation is to disable SHA-512 by
+adding no-sha512 to ./config [or ./Configure] command line. Another
+possible alternative might be to switch to GCC.
+
+* Test suite still fails, what to do?
+
+Another common reason for failure to complete some particular test is
+simply bad code generated by a buggy component in toolchain or deficiency
+in run-time environment. There are few cases documented in PROBLEMS file,
+consult it for possible workaround before you beat the drum. Even if you
+don't find solution or even mention there, do reserve for possibility of
+a compiler bug. Compiler bugs might appear in rather bizarre ways, they
+never make sense, and tend to emerge when you least expect them. In order
+to identify one, drop optimization level, e.g. by editing CFLAG line in
+top-level Makefile, recompile and re-run the test.
+
 [PROG] ========================================================================
 
 * Is OpenSSL thread-safe?
@@ -609,8 +716,9 @@ libraries.  If your platform is not one of these, consult the INSTALL
 file.
 
 Multi-threaded applications must provide two callback functions to
-OpenSSL.  This is described in the threads(3) manpage.
-
+OpenSSL by calling CRYPTO_set_locking_callback() and
+CRYPTO_set_id_callback().  This is described in the threads(3)
+manpage.
 
 * I've compiled a program under Windows and it crashes: why?
 
@@ -630,10 +738,10 @@ your application must link  against the same by which OpenSSL was
 built.  If you are using MS Visual C++ (Studio) this can be changed
 by:
 
-1.  Select Settings... from the Project Menu.
-2.  Select the C/C++ Tab.
-3.  Select "Code Generation from the "Category" drop down list box
-4.  Select the Appropriate library (see table below) from the "Use
+ 1. Select Settings... from the Project Menu.
+ 2. Select the C/C++ Tab.
+ 3. Select "Code Generation from the "Category" drop down list box
+ 4. Select the Appropriate library (see table below) from the "Use
     run-time library" drop down list box.  Perform this step for both
     your debug and release versions of your application (look at the
     top left of the settings panel to change between the two)
@@ -652,6 +760,20 @@ by:
 Note that debug and release libraries are NOT interchangeable.  If you
 built OpenSSL with /MD your application must use /MD and cannot use /MDd.
 
+As per 0.9.8 the above limitation is eliminated for .DLLs. OpenSSL
+.DLLs compiled with some specific run-time option [we insist on the
+default /MD] can be deployed with application compiled with different
+option or even different compiler. But there is a catch! Instead of
+re-compiling OpenSSL toolkit, as you would have to with prior versions,
+you have to compile small C snippet with compiler and/or options of
+your choice. The snippet gets installed as
+<install-root>/include/openssl/applink.c and should be either added to
+your application project or simply #include-d in one [and only one]
+of your application source files. Failure to link this shim module
+into your application manifests itself as fatal "no OPENSSL_Applink"
+run-time error. An explicit reminder is due that in this situation
+[mixing compiler options] it is as important to add CRYPTO_malloc_init
+prior first call to OpenSSL.
 
 * How do I read or write a DER encoded buffer using the ASN1 functions?
 
@@ -737,11 +859,11 @@ code itself (the hex digits after the second colon).
 
 * Why do I get errors about unknown algorithms?
 
-This can happen under several circumstances such as reading in an
-encrypted private key or attempting to decrypt a PKCS#12 file. The cause
-is forgetting to load OpenSSL's table of algorithms with
-OpenSSL_add_all_algorithms(). See the manual page for more information.
-
+The cause is forgetting to load OpenSSL's table of algorithms with
+OpenSSL_add_all_algorithms(). See the manual page for more information. This
+can cause several problems such as being unable to read in an encrypted
+PEM file, unable to decrypt a PKCS#12 file or signature failure when
+verifying certificates.
 
 * Why can't the OpenSSH configure script detect OpenSSL?
 
@@ -809,5 +931,35 @@ thread-safe):
   ERR_free_strings(), EVP_cleanup() and CRYPTO_cleanup_all_ex_data().
 
 
-===============================================================================
+* Why does Valgrind complain about the use of uninitialized data?
 
+When OpenSSL's PRNG routines are called to generate random numbers the supplied
+buffer contents are mixed into the entropy pool: so it technically does not
+matter whether the buffer is initialized at this point or not.  Valgrind (and
+other test tools) will complain about this. When using Valgrind, make sure the
+OpenSSL library has been compiled with the PURIFY macro defined (-DPURIFY)
+to get rid of these warnings.
+
+
+* Why doesn't a memory BIO work when a file does?
+
+This can occur in several cases for example reading an S/MIME email message.
+The reason is that a memory BIO can do one of two things when all the data
+has been read from it.
+
+The default behaviour is to indicate that no more data is available and that
+the call should be retried, this is to allow the application to fill up the BIO
+again if necessary.
+
+Alternatively it can indicate that no more data is available and that EOF has
+been reached.
+
+If a memory BIO is to behave in the same way as a file this second behaviour
+is needed. This must be done by calling:
+
+   BIO_set_mem_eof_return(bio, 0);
+
+See the manual pages for more details.
+
+
+===============================================================================

INSTALL

@@ -75,7 +75,9 @@
   no-asm        Do not use assembler code.
 
   386           Use the 80386 instruction set only (the default x86 code is
-                more efficient, but requires at least a 486).
+                more efficient, but requires at least a 486). Note: Use
+                compiler flags for any other CPU specific configuration,
+                e.g. "-m32" to build x86 code on an x64 system.
 
   no-sse2	Exclude SSE2 code pathes. Normally SSE2 extention is
 		detected at run-time, but the decision whether or not the
@@ -96,7 +98,7 @@
                 The crypto/<cipher> directory can be removed after running
                 "make depend".
 
-  -Dxxx, -lxxx, -Lxxx, -fxxx, -Kxxx These system specific options will
+  -Dxxx, -lxxx, -Lxxx, -fxxx, -mxxx, -Kxxx These system specific options will
                 be passed through to the compiler to allow you to
                 define preprocessor symbols, specify additional libraries,
                 library directories or other compiler options.
@@ -156,7 +158,7 @@
      standard headers).  If it is a problem with OpenSSL itself, please
      report the problem to <openssl-bugs@openssl.org> (note that your
      message will be recorded in the request tracker publicly readable
-     via http://www.openssl.org/support/rt2.html and will be forwarded to a
+     via http://www.openssl.org/support/rt.html and will be forwarded to a
      public mailing list). Include the output of "make report" in your message.
      Please check out the request tracker. Maybe the bug was already
      reported or has already been fixed.
@@ -178,7 +180,7 @@
      in Makefile.ssl and run "make clean; make". Please send a bug
      report to <openssl-bugs@openssl.org>, including the output of
      "make report" in order to be added to the request tracker at
-     http://www.openssl.org/support/rt2.html.
+     http://www.openssl.org/support/rt.html.
 
   4. If everything tests ok, install OpenSSL with
 
@@ -300,10 +302,10 @@
  Note on shared libraries
  ------------------------
 
- Shared library is currently an experimental feature.  The only reason to
- have them would be to conserve memory on systems where several program
- are using OpenSSL.  Binary backward compatibility can't be guaranteed
- before OpenSSL version 1.0.
+ Shared libraries have certain caveats.  Binary backward compatibility
+ can't be guaranteed before OpenSSL version 1.0.  The only reason to
+ use them would be to conserve memory on systems where several programs
+ are using OpenSSL.
 
  For some systems, the OpenSSL Configure script knows what is needed to
  build shared libraries for libcrypto and libssl.  On these systems,
@@ -328,7 +330,7 @@
  Note on support for multiple builds
  -----------------------------------
 
- OpenSSL is usually built in it's source tree.  Unfortunately, this doesn't
+ OpenSSL is usually built in its source tree.  Unfortunately, this doesn't
  support building for multiple platforms from the same source tree very well.
  It is however possible to build in a separate tree through the use of lots
  of symbolic links, which should be prepared like this:

INSTALL.NW

@@ -8,54 +8,62 @@ Notes about building OpenSSL for NetWare.
 BUILD PLATFORM:
 ---------------
 The build scripts (batch files, perl scripts, etc) have been developed and
-tested on W2K.  The scripts should run fine on other Windows
-platforms (NT, Win9x, WinXP) but they haven't been tested.  They may require 
-some modifications.
+tested on W2K.  The scripts should run fine on other Windows platforms
+(NT, Win9x, WinXP) but they have not been tested.  They may require some
+modifications.
 
 
 Supported NetWare Platforms - NetWare 5.x, NetWare 6.x:
-------------------------------------------
-OpenSSL uses the WinSock interfaces introduced in NetWare 5.  Therefore,
-previous versions of NetWare, 4.x and 3.x, are not supported.
+-------------------------------------------------------
+OpenSSL can either use the WinSock interfaces introduced in NetWare 5,
+or the BSD socket interface.  Previous versions of NetWare, 4.x and 3.x,
+are only supported if OpenSSL is build for CLIB and BSD sockets;
+WinSock builds only support NetWare 5 and up.
 
 On NetWare there are two c-runtime libraries.  There is the legacy CLIB 
-interfaces and the newer LibC interfaces.  Being ANSI-C libraries, the 
-functionality in CLIB and LibC is similar but the LibC interfaces are built 
+interfaces and the newer LIBC interfaces.  Being ANSI-C libraries, the 
+functionality in CLIB and LIBC is similar but the LIBC interfaces are built 
 using Novell Kernal Services (NKS) which is designed to leverage 
 multi-processor environments.
 
-The NetWare port of OpenSSL can configured to build using CLIB or LibC.  The 
-CLIB build was developed and tested using NetWare 5.0 sp6.0a.  The LibC 
+The NetWare port of OpenSSL can be configured to build using CLIB or LIBC.
+The CLIB build was developed and tested using NetWare 5.0 sp6.0a.  The LIBC 
 build was developed and tested using the NetWare 6.0 FCS.  
 
-The necessary LibC functionality ships with NetWare 6.  However, earlier 
-NetWare 5.x versions will require updates in order to run the OpenSSL LibC
-build.
+The necessary LIBC functionality ships with NetWare 6.  However, earlier 
+NetWare 5.x versions will require updates in order to run the OpenSSL LIBC
+build (NetWare 5.1 SP8 is known to work).
 
+As of June 2005, the LIBC build can be configured to use BSD sockets instead
+of WinSock sockets. Call Configure (usually through netware\build.bat) using
+a target of "netware-libc-bsdsock" instead of "netware-libc".
+
+As of June 2007, support for CLIB and BSD sockets is also now available
+using a target of "netware-clib-bsdsock" instead of "netware-clib";
+also gcc builds are now supported on both Linux and Win32 (post 0.9.8e).
 
 REQUIRED TOOLS:
 ---------------
 Based upon the configuration and build options used, some or all of the
 following tools may be required:
 
-
 * Perl for Win32 - required (http://www.activestate.com/ActivePerl)
    Used to run the various perl scripts on the build platform.
 
-
 * Perl 5.8.0 for NetWare v3.20 (or later) - required 
    (http://developer.novell.com) Used to run the test script on NetWare 
    after building.
 
+* Compiler / Linker - required:
+   Metrowerks CodeWarrior PDK 2.1 (or later) for NetWare (commercial):
+      Provides command line tools used for building.
+      Tools:
+      mwccnlm.exe  - C/C++ Compiler for NetWare
+      mwldnlm.exe  - Linker for NetWare
+      mwasmnlm.exe - x86 assembler for NetWare (if using assembly option)
 
-* Metrowerks CodeWarrior PDK 2.1 (or later) for NetWare - required:
-   Provides command line tools used for building.
-
-   Tools:
-   mwccnlm.exe  - C/C++ Compiler for NetWare
-   mwldnlm.exe  - Linker for NetWare
-   mwasmnlm.exe - x86 assembler for NetWare (if using assembly option)
-
+   gcc / nlmconv Cross-Compiler, available from Novell Forge (free):
+         http://forge.novell.com/modules/xfmod/project/?aunixnw
 
 * Assemblers - optional:
    If you intend to build using the assembly options you will need an
@@ -75,11 +83,11 @@ following tools may be required:
    In order to build you will need a make tool.  Two make tools are
    supported, GNU make (gmake.exe) or Microsoft nmake.exe.
 
-   gmake.exe - GNU make for Windows (version 3.75 used for development)
-         http://www.gnu.org/software/make/make.html
+   make.exe - GNU make for Windows (version 3.75 used for development)
+         http://gnuwin32.sourceforge.net/packages/make.htm
 
    nmake.exe - Microsoft make (Version 6.00.8168.0 used for development)
-
+         http://support.microsoft.com/kb/132084/EN-US/
 
 * Novell Developer Kit (NDK) - required: (http://developer.novell.com)
 
@@ -95,7 +103,12 @@ following tools may be required:
          Microsoft SDK.  Note: The winsock2.h support headers may change
          with various versions of winsock2.h.  Check the dependencies
          section on the NDK WinSock2 download page for the latest
-         information on dependencies.
+         information on dependencies. These components are unsupported by
+         Novell. They are provided as a courtesy, but it is strongly
+         suggested that all development be done using LIBC, not CLIB.
+
+         As of June 2005, the WinSock2 components are available at:
+         http://forgeftp.novell.com//ws2comp/
 
 
       NLM and NetWare libraries for C (including CLIB and XPlat):
@@ -114,14 +127,15 @@ following tools may be required:
 
    LIBC - BUILDS:
    
-      Libraries for C (LibC) - LibC headers and import files
-         If you are going to build a LibC version of OpenSSL, you will
-         need the LibC headers and imports.  The March 14, 2002 NDK release or
+      Libraries for C (LIBC) - LIBC headers and import files
+         If you are going to build a LIBC version of OpenSSL, you will
+         need the LIBC headers and imports.  The March 14, 2002 NDK release or
          later is required.  
          
-         NOTE: The LibC SDK includes the necessary WinSock2 support.  It
-         It is not necessary to download the WinSock2 Developer when building
-         for LibC.
+         NOTE: The LIBC SDK includes the necessary WinSock2 support.
+         It is not necessary to download the WinSock2 NDK when building for
+         LIBC. The LIBC SDK also includes the appropriate BSD socket support
+         if configuring to use BSD sockets.
 
 
 BUILDING:
@@ -133,33 +147,36 @@ The set_env.bat file is a template you can use to set up the path
 and environment variables you will need to build.  Modify the
 various lines to point to YOUR tools and run set_env.bat.
 
-   netware\set_env.bat [target]
+   netware\set_env.bat <target> [compiler]
 
-      target        - "netware-clib" - CLib NetWare build
-                    - "netware-libc" - LibC NetWare build
+      target        - "netware-clib" - CLIB NetWare build
+                    - "netware-libc" - LIBC NetWare build
+
+      compiler      - "gnuc"         - GNU GCC Compiler
+                    - "codewarrior"  - MetroWerks CodeWarrior (default)
 
 If you don't use set_env.bat, you will need to set up the following
 environment variables:
 
-   path - Set path to point to the tools you will use.
+   PATH - Set PATH to point to the tools you will use.
 
-   MWCIncludes - The location of the NDK include files.
+   INCLUDE - The location of the NDK include files.
          
-            CLIB ex: set MWCIncludes=c:\ndk\nwsdk\include\nlm
-            LibC ex: set MWCIncludes=c:\ndk\libc\include
+            CLIB ex: set INCLUDE=c:\ndk\nwsdk\include\nlm
+            LIBC ex: set INCLUDE=c:\ndk\libc\include
 
    PRELUDE - The absolute path of the prelude object to link with.  For
             a CLIB build it is recommended you use the "clibpre.o" files shipped
-            with the Metrowerks PDK for NetWare.  For a LibC build you should 
-            use the "libcpre.o" file delivered with the LibC NDK components.
+            with the Metrowerks PDK for NetWare.  For a LIBC build you should 
+            use the "libcpre.o" file delivered with the LIBC NDK components.
 
             CLIB ex: set PRELUDE=c:\ndk\nwsdk\imports\clibpre.o
-            LibC ex: set PRELUDE=c:\ndk\libc\imports\libcpre.o
+            LIBC ex: set PRELUDE=c:\ndk\libc\imports\libcpre.o
 
    IMPORTS - The locaton of the NDK import files.
 
             CLIB ex: set IMPORTS=c:\ndk\nwsdk\imports
-            LibC ex: set IMPORTS=c:\ndk\libc\imports
+            LIBC ex: set IMPORTS=c:\ndk\libc\imports
 
 
 In order to build, you need to run the Perl scripts to configure the build
@@ -172,8 +189,10 @@ the assembly code.  Always run build.bat from the "openssl" directory.
 
    netware\build [target] [debug opts] [assembly opts] [configure opts]
 
-      target        - "netware-clib" - CLib NetWare build
-                    - "netware-libc" - LibC NetWare build
+      target        - "netware-clib" - CLIB NetWare build (WinSock Sockets)
+                    - "netware-clib-bsdsock" - CLIB NetWare build (BSD Sockets)
+                    - "netware-libc" - LIBC NetWare build (WinSock Sockets)
+                    - "netware-libc-bsdsock" - LIBC NetWare build (BSD Sockets)
  
       debug opts    - "debug"  - build debug
 
@@ -182,35 +201,41 @@ the assembly code.  Always run build.bat from the "openssl" directory.
                       "no-asm"   - don't use assembly
 
       configure opts- all unrecognized arguments are passed to the
-                      perl configure script
+                      perl 'configure' script. See that script for
+                      internal documentation regarding options that
+                      are available.
 
    examples:
 
       CLIB build, debug, without assembly:
          netware\build.bat netware-clib debug no-asm
 
-      LibC build, non-debug, using NASM assembly:
-         netware\build.bat netware-libc nw-nasm
+      LIBC build, non-debug, using NASM assembly, add mdc2 support:
+         netware\build.bat netware-libc nw-nasm enable-mdc2
+
+      LIBC build, BSD sockets, non-debug, without assembly:
+         netware\build.bat netware-libc-bsdsock no-asm
 
 Running build.bat generates a make file to be processed by your make 
 tool (gmake or nmake):
 
-   CLIB ex: gmake -f netware\nlm_clib.mak 
-   LibC ex: gmake -f netware\nlm_libc.mak 
+   CLIB ex: gmake -f netware\nlm_clib_dbg.mak 
+   LIBC ex: gmake -f netware\nlm_libc.mak 
+   LIBC ex: gmake -f netware\nlm_libc_bsdsock.mak 
 
 
 You can also run the build scripts manually if you do not want to use the
 build.bat file.  Run the following scripts in the "\openssl"
 subdirectory (in the order listed below):
 
-   perl configure no-asm [other config opts] [netware-clib|netware-libc]
+   perl configure no-asm [other config opts] [netware-clib|netware-libc|netware-libc-bsdsock]
       configures no assembly build for specified netware environment
-      (CLIB or LibC).
+      (CLIB or LIBC).
 
    perl util\mkfiles.pl >MINFO
       generates a listing of source files (used by mk1mf)
 
-   perl util\mk1mf.pl no-asm [other config opts] [netware-clib|netware-libc >netware\nlm.mak
+   perl util\mk1mf.pl no-asm [other config opts] [netware-clib|netware-libc|netware-libc-bsdsock >netware\nlm.mak
       generates the makefile for NetWare
 
    gmake -f netware\nlm.mak
@@ -235,12 +260,12 @@ The output from the build is placed in the following directories:
       tmp_nw_clib         - temporary build files
       outinc_nw_clib      - necesary include files
 
-   LibC Debug build:
+   LIBC Debug build:
       out_nw_libc.dbg     - static libs & test nlm(s)
       tmp_nw_libc.dbg     - temporary build files
       outinc_nw_libc      - necessary include files
 
-   LibC Non-debug build:
+   LIBC Non-debug build:
       out_nw_libc         - static libs & test nlm(s)
       tmp_nw_libc         - temporary build files
       outinc_nw_libc      - necesary include files
@@ -266,7 +291,7 @@ To run cpy_tests.bat:
       NetWare drive    - drive letter of mapped drive
 
       CLIB ex: netware\cpy_tests out_nw_clib m:
-      LibC ex: netware\cpy_tests out_nw_libc m:
+      LIBC ex: netware\cpy_tests out_nw_libc m:
 
 
 The Perl script, "do_tests.pl", in the "OpenSSL" directory on the server
@@ -288,13 +313,6 @@ The do_tests.pl script generates a log file "\openssl\test_out\tests.log"
 which should be reviewed for errors.  Any errors will be denoted by the word
 "ERROR" in the log.
 
-NOTE:  Currently (11/2002), the LibC test nlms report an error while loading
-       when launched from the perl script (do_tests.pl).  The problems are 
-       being addressed by the LibC development team and should be fixed in the
-       next release.  Until the problems are corrected, the LibC test nlms 
-       will have to be executed manually.  
-
-
 DEVELOPING WITH THE OPENSSL SDK:
 --------------------------------
 Now that everything is built and tested, you are ready to use the OpenSSL
@@ -348,9 +366,9 @@ clean up the resources!
 
 Multi-threaded Development
 ---------------------------
-The NetWare version of OpenSSL is thread-safe however, multi-threaded
+The NetWare version of OpenSSL is thread-safe, however multi-threaded
 applications must provide the necessary locking function callbacks.  This
-is described in doc\threads.doc.  The file "openssl\crypto\threads\mttest.c"
+is described in doc\threads.doc.  The file "openssl-x.x.x\crypto\threads\mttest.c"
 is a multi-threaded test program and demonstrates the locking functions.
 
 
@@ -420,7 +438,7 @@ Makefile "vclean"
 ------------------
 The generated makefile has a "vclean" target which cleans up the build
 directories.  If you have been building successfully and suddenly
-experience problems, use "vclean" (gmake -f netware\nlm.mak vclean) and retry.
+experience problems, use "vclean" (gmake -f netware\nlm_xxxx.mak vclean) and retry.
 
 
 "Undefined Symbol" Linker errors

INSTALL.W32

@@ -3,6 +3,7 @@
  ----------------------------------
 
  [Instructions for building for Windows CE can be found in INSTALL.WCE]
+ [Instructions for building for Win64 can be found in INSTALL.W64]
 
  Heres a few comments about building OpenSSL in Windows environments.  Most
  of this is tested on Win32 but it may also work in Win 3.1 with some
@@ -48,7 +49,9 @@
 
  Firstly you should run Configure:
 
- > perl Configure VC-WIN32
+ > perl Configure VC-WIN32 --prefix=c:/some/openssl/dir
+
+Where the prefix argument specifies where OpenSSL will be installed to.
 
  Next you need to build the Makefiles and optionally the assembly language
  files:
@@ -76,8 +79,12 @@
  If all is well it should compile and you will have some DLLs and executables
  in out32dll. If you want to try the tests then do:
  
- > cd out32dll
- > ..\ms\test
+ > nmake -f ms\ntdll.mak test
+
+
+To install OpenSSL to the specified location do:
+
+> nmake -f ms\ntdll.mak install
 
  Tweaks:
 
@@ -87,6 +94,12 @@
  compiled in. Note that mk1mf.pl expects the platform to be the last argument
  on the command line, so 'debug' must appear before that, as all other options.
 
+
+ By default in 0.9.8 OpenSSL will compile builtin ENGINES into the libeay32.dll
+ shared library. If you specify the "no-static-engine" option on the command
+ line to Configure the shared library build (ms\ntdll.mak) will compile the
+ engines as separate DLLs.
+
  The default Win32 environment is to leave out any Windows NT specific
  features.
 
@@ -97,6 +110,8 @@
  You can also build a static version of the library using the Makefile
  ms\nt.mak
 
+
+
  Borland C++ builder 5
  ---------------------
 
@@ -286,3 +301,21 @@
  (e.g. fopen()), and OpenSSL cannot change these; so in general you cannot
  rely on CRYPTO_malloc_init() solving your problem, and you should
  consistently use the multithreaded library.
+
+ Linking your application
+ ------------------------
+
+ If you link with static OpenSSL libraries [those built with ms/nt.mak],
+ then you're expected to additionally link your application with
+ WSOCK32.LIB, ADVAPI32.LIB, GDI32.LIB and USER32.LIB. Those developing
+ non-interactive service applications might feel concerned about linking
+ with latter two, as they are justly associated with interactive desktop,
+ which is not available to service processes. The toolkit is designed
+ to detect in which context it's currently executed, GUI, console app
+ or service, and act accordingly, namely whether or not to actually make
+ GUI calls.
+
+ If you link with OpenSSL .DLLs, then you're expected to include into
+ your application code small "shim" snippet, which provides glue between
+ OpenSSL BIO layer and your compiler run-time. Look up OPENSSL_Applink
+ reference page for further details.

INSTALL.W64

@@ -0,0 +1,66 @@
+
+ INSTALLATION ON THE WIN64 PLATFORM
+ ----------------------------------
+
+ Caveat lector
+ -------------
+
+ As of moment of this writing Win64 support is classified "initial"
+ for the following reasons.
+
+ - No assembler modules are engaged upon initial 0.9.8 release.
+ - API might change within 0.9.8 life-span, *but* in a manner which
+   doesn't break backward binary compatibility. Or in other words,
+   application programs compiled with initial 0.9.8 headers will
+   be expected to work with future minor release .DLL without need
+   to re-compile, even if future minor release features modified API.
+ - Above mentioned API modifications have everything to do with
+   elimination of a number of limitations, which are normally
+   considered inherent to 32-bit platforms. Which in turn is why they
+   are treated as limitations on 64-bit platform such as Win64:-)
+   The current list comprises [but not necessarily limited to]:
+
+   - null-terminated strings may not be longer than 2G-1 bytes,
+     longer strings are treated as zero-length;
+   - dynamically and *internally* allocated chunks can't be larger
+     than 2G-1 bytes;
+   - inability to encrypt/decrypt chunks of data larger than 4GB
+     [it's possibly to *hash* chunks of arbitrary size through];
+
+   Neither of these is actually big deal and hardly encountered
+   in real-life applications.
+
+ Compiling procedure
+ -------------------
+
+ You will need Perl. You can run under Cygwin or you can download
+ ActiveState Perl from http://www.activestate.com/ActivePerl.
+
+ You will need Microsoft Platform SDK, available for download at
+ http://www.microsoft.com/msdownload/platformsdk/sdkupdate/. As per
+ April 2005 Platform SDK is equipped with Win64 compilers, as well
+ as assemblers, but it might change in the future.
+
+ To build for Win64/x64:
+
+ > perl Configure VC-WIN64A
+ > ms\do_win64a
+ > nmake -f ms\ntdll.mak
+ > cd out32dll
+ > ..\ms\test
+
+ To build for Win64/IA64:
+
+ > perl Configure VC-WIN64I
+ > ms\do_win64i
+ > nmake -f ms\ntdll.mak
+ > cd out32dll
+ > ..\ms\test
+
+ Naturally test-suite itself has to be executed on the target platform.
+
+ Installation
+ ------------
+
+ TBD, for now see INSTALL.W32.
+

INSTALL.WCE

@@ -11,8 +11,11 @@
  You also need Perl for Win32.  You will need ActiveState Perl, available
  from http://www.activestate.com/ActivePerl.
 
- Windows CE support in OpenSSL relies on wcecompat.  All Windows CE specific
- issues should be directed to www.essemer.com.au.
+ Windows CE support in OpenSSL relies on wcecompat and therefore it's
+ appropriate to check http://www.essemer.com.au/windowsce/ for updates in
+ case of compilation problems. As for the moment of this writing version
+ 1.1 is available and actually required for WCE 4.2 and newer platforms.
+ All Windows CE specific issues should be directed to www.essemer.com.au.
 
  The C Runtime Library implementation for Windows CE that is included with
  Microsoft eMbedded Visual C++ 3.0 is incomplete and in some places

LICENSE

@@ -12,7 +12,7 @@
   ---------------
 
 /* ====================================================================
- * Copyright (c) 1998-2005 The OpenSSL Project.  All rights reserved.
+ * Copyright (c) 1998-2008 The OpenSSL Project.  All rights reserved.
  *
  * Redistribution and use in source and binary forms, with or without
  * modification, are permitted provided that the following conditions

MacOS/GetHTTPS.src/ErrorHandling.hpp

@@ -29,7 +29,7 @@ OSErr AppendErrorMessageToHandle(Handle inoutHandle);
 
 
 
-//	A bunch of evil macros that would be uneccessary if I were always using C++ !
+//	A bunch of evil macros that would be unnecessary if I were always using C++ !
 
 #define SetErrorMessageAndBailIfNil(theArg,theMessage)								\
 {																					\

Makefile.org

@@ -65,6 +65,7 @@ EX_LIBS=
 EXE_EXT= 
 ARFLAGS=
 AR=ar $(ARFLAGS) r
+ARD=ar $(ARFLAGS) d
 RANLIB= ranlib
 PERL= perl
 TAR= tar
@@ -100,18 +101,50 @@ RMD160_ASM_OBJ=
 KRB5_INCLUDES=
 LIBKRB5=
 
-DIRS=   crypto ssl engines apps test tools
-SHLIBDIRS= crypto ssl
+# Zlib stuff
+ZLIB_INCLUDE=
+LIBZLIB=
+
+# This is the location of fipscanister.o and friends.
+# The FIPS module build will place it $(INSTALLTOP)/lib
+# but since $(INSTALLTOP) can only take the default value
+# when the module is built it will be in /usr/local/ssl/lib
+# $(INSTALLTOP) for this build make be different so hard
+# code the path.
+
+FIPSLIBDIR=/usr/local/ssl/lib/
+
+# This is set to "y" if fipscanister.o is compiled internally as
+# opposed to coming from an external validated location.
+
+FIPSCANISTERINTERNAL=n
+
+# The location of the library which contains fipscanister.o
+# normally it will be libcrypto unless fipsdso is set in which
+# case it will be libfips. If not compiling in FIPS mode at all
+# this is empty making it a useful test for a FIPS compile.
+
+FIPSCANLIB=
+
+# Shared library base address. Currently only used on Windows.
+#
+
+BASEADDR=
+
+DIRS=   crypto fips ssl engines apps test tools
+SHLIBDIRS= crypto ssl fips
 
 # dirs in crypto to build
 SDIRS=  \
 	objects \
 	md2 md4 md5 sha mdc2 hmac ripemd \
-	des aes rc2 rc4 rc5 idea bf cast \
+	des aes rc2 rc4 rc5 idea bf cast camellia seed \
 	bn ec rsa dsa ecdsa dh ecdh dso engine \
 	buffer bio stack lhash rand err \
 	evp asn1 pem x509 x509v3 conf txt_db pkcs7 pkcs12 comp ocsp ui krb5 \
-	store pqueue
+	store cms pqueue jpake
+# keep in mind that the above list is adjusted by ./Configure
+# according to no-xxx arguments...
 
 # tests to perform.  "alltests" is a special word indicating that all tests
 # should be performed.
@@ -132,6 +165,7 @@ WDIRS=  windows
 LIBS=   libcrypto.a libssl.a
 SHARED_CRYPTO=libcrypto$(SHLIB_EXT)
 SHARED_SSL=libssl$(SHLIB_EXT)
+SHARED_FIPS=
 SHARED_LIBS=
 SHARED_LIBS_LINK_EXTS=
 SHARED_LDFLAGS=
@@ -144,14 +178,35 @@ WTARFILE=       $(NAME)-win.tar
 EXHEADER=       e_os2.h
 HEADER=         e_os.h
 
-all: Makefile build_all openssl.pc
+all: Makefile build_all openssl.pc libssl.pc libcrypto.pc
+
+# as we stick to -e, CLEARENV ensures that local variables in lower
+# Makefiles remain local and variable. $${VAR+VAR} is tribute to Korn
+# shell, which [annoyingly enough] terminates unset with error if VAR
+# is not present:-( TOP= && unset TOP is tribute to HP-UX /bin/sh,
+# which terminates unset with error if no variable was present:-(
+CLEARENV=	TOP= && unset TOP $${LIB+LIB} $${LIBS+LIBS}	\
+		$${INCLUDE+INCLUDE} $${INCLUDES+INCLUDES}	\
+		$${DIR+DIR} $${DIRS+DIRS} $${SRC+SRC}		\
+		$${LIBSRC+LIBSRC} $${LIBOBJ+LIBOBJ} $${ALL+ALL}	\
+		$${EXHEADER+EXHEADER} $${HEADER+HEADER}		\
+		$${GENERAL+GENERAL} $${CFLAGS+CFLAGS}		\
+		$${ASFLAGS+ASFLAGS} $${AFLAGS+AFLAGS}		\
+		$${LDCMD+LDCMD} $${LDFLAGS+LDFLAGS}		\
+		$${SHAREDCMD+SHAREDCMD} $${SHAREDFLAGS+SHAREDFLAGS}	\
+		$${SHARED_LIB+SHARED_LIB} $${LIBEXTRAS+LIBEXTRAS}
 
 BUILDENV=	PLATFORM='${PLATFORM}' PROCESSOR='${PROCESSOR}' \
-		SDIRS='$(SDIRS)' INSTALLTOP='${INSTALLTOP}'	\
 		CC='${CC}' CFLAG='${CFLAG}' 			\
 		AS='${CC}' ASFLAG='${CFLAG} -c'			\
 		AR='${AR}' PERL='${PERL}' RANLIB='${RANLIB}'	\
-		LDFLAGS="$(LDFLAGS)" SHARED_LDFLAGS="$(SHARED_LDFLAGS)"	\
+		SDIRS='${SDIRS}' LIBRPATH='${INSTALLTOP}/lib'	\
+		INSTALL_PREFIX='${INSTALL_PREFIX}'		\
+		INSTALLTOP='${INSTALLTOP}' OPENSSLDIR='${OPENSSLDIR}'	\
+		MAKEDEPEND='$$$${TOP}/util/domd $$$${TOP} -MD ${MAKEDEPPROG}' \
+		DEPFLAG='-DOPENSSL_NO_DEPRECATED ${DEPFLAG}'	\
+		MAKEDEPPROG='${MAKEDEPPROG}'			\
+		SHARED_LDFLAGS='${SHARED_LDFLAGS}'		\
 		KRB5_INCLUDES='${KRB5_INCLUDES}' LIBKRB5='${LIBKRB5}'	\
 		EXE_EXT='${EXE_EXT}' SHARED_LIBS='${SHARED_LIBS}'	\
 		SHLIB_EXT='${SHLIB_EXT}' SHLIB_TARGET='${SHLIB_TARGET}'	\
@@ -163,41 +218,150 @@ BUILDENV=	PLATFORM='${PLATFORM}' PROCESSOR='${PROCESSOR}' \
 		RC4_ENC='${RC4_ENC}' RC5_ENC='${RC5_ENC}'	\
 		SHA1_ASM_OBJ='${SHA1_ASM_OBJ}'			\
 		MD5_ASM_OBJ='${MD5_ASM_OBJ}'			\
-		RMD160_ASM_OBJ='${RMD160_ASM_OBJ}'
+		RMD160_ASM_OBJ='${RMD160_ASM_OBJ}'		\
+		FIPSLIBDIR='${FIPSLIBDIR}'			\
+		FIPSCANLIB="$${FIPSCANLIB:-$(FIPSCANLIB)}"	\
+		FIPSCANISTERINTERNAL='${FIPSCANISTERINTERNAL}'	\
+		FIPS_EX_OBJ='${FIPS_EX_OBJ}'	\
+		THIS=$${THIS:-$@} MAKEFILE=Makefile MAKEOVERRIDES=
+# MAKEOVERRIDES= effectively "equalizes" GNU-ish and SysV-ish make flavors,
+# which in turn eliminates ambiguities in variable treatment with -e.
 
-BUILD_CMD=if echo " $(DIRS) " | grep " $$dir " >/dev/null 2>/dev/null; then \
-	if [ -d "$$dir" ]; then \
-		(cd $$dir && echo "making $$target in $$dir..." && \
-		$(MAKE) -e $(BUILDENV) $$target ) || exit 1; \
-	else \
-		$(MAKE) $$dir; \
-	fi; fi
+# BUILD_CMD is a generic macro to build a given target in a given
+# subdirectory.  The target must be given through the shell variable
+# `target' and the subdirectory to build in must be given through `dir'.
+# This macro shouldn't be used directly, use RECURSIVE_BUILD_CMD or
+# BUILD_ONE_CMD instead.
+#
+# BUILD_ONE_CMD is a macro to build a given target in a given
+# subdirectory if that subdirectory is part of $(DIRS).  It requires
+# exactly the same shell variables as BUILD_CMD.
+#
+# RECURSIVE_BUILD_CMD is a macro to build a given target in all
+# subdirectories defined in $(DIRS).  It requires that the target
+# is given through the shell variable `target'.
+BUILD_CMD=  if [ -d "$$dir" ]; then \
+	    (	[ $$target != all -a -z "$(FIPSCANLIB)" ] && FIPSCANLIB=/dev/null; \
+		cd $$dir && echo "making $$target in $$dir..." && \
+		$(CLEARENV) && $(MAKE) -e $(BUILDENV) TOP=.. DIR=$$dir $$target \
+	    ) || exit 1; \
+	    fi
+RECURSIVE_BUILD_CMD=for dir in $(DIRS); do $(BUILD_CMD); done
+BUILD_ONE_CMD=\
+	if echo " $(DIRS) " | grep " $$dir " >/dev/null 2>/dev/null; then \
+		$(BUILD_CMD); \
+	fi
+
+reflect:
+	@[ -n "$(THIS)" ] && $(CLEARENV) && $(MAKE) $(THIS) -e $(BUILDENV)
+
+FIPS_EX_OBJ= ../crypto/aes/aes_cfb.o \
+	../crypto/aes/aes_ecb.o \
+	../crypto/aes/aes_ofb.o \
+	../crypto/bn/bn_add.o \
+	../crypto/bn/bn_blind.o \
+	../crypto/bn/bn_ctx.o \
+	../crypto/bn/bn_div.o \
+	../crypto/bn/bn_exp2.o \
+	../crypto/bn/bn_exp.o \
+	../crypto/bn/bn_gcd.o \
+	../crypto/bn/bn_lib.o \
+	../crypto/bn/bn_mod.o \
+	../crypto/bn/bn_mont.o \
+	../crypto/bn/bn_mul.o \
+	../crypto/bn/bn_prime.o \
+	../crypto/bn/bn_rand.o \
+	../crypto/bn/bn_recp.o \
+	../crypto/bn/bn_shift.o \
+	../crypto/bn/bn_sqr.o \
+	../crypto/bn/bn_word.o \
+	../crypto/bn/bn_x931p.o \
+	../crypto/buffer/buf_str.o \
+	../crypto/cryptlib.o \
+	../crypto/des/cfb64ede.o \
+	../crypto/des/cfb64enc.o \
+	../crypto/des/cfb_enc.o \
+	../crypto/des/ecb3_enc.o \
+	../crypto/des/ecb_enc.o \
+	../crypto/des/ofb64ede.o \
+	../crypto/des/ofb64enc.o \
+	../crypto/des/fcrypt.o \
+	../crypto/des/set_key.o \
+	../crypto/dsa/dsa_utl.o \
+	../crypto/dsa/dsa_sign.o \
+	../crypto/dsa/dsa_vrf.o \
+	../crypto/err/err.o \
+	../crypto/evp/digest.o \
+	../crypto/evp/enc_min.o \
+	../crypto/evp/e_aes.o \
+	../crypto/evp/e_des3.o \
+	../crypto/evp/p_sign.o \
+	../crypto/evp/p_verify.o \
+	../crypto/mem_clr.o \
+	../crypto/mem.o \
+	../crypto/rand/md_rand.o \
+	../crypto/rand/rand_egd.o \
+	../crypto/rand/randfile.o \
+	../crypto/rand/rand_lib.o \
+	../crypto/rand/rand_os2.o \
+	../crypto/rand/rand_unix.o \
+	../crypto/rand/rand_win.o \
+	../crypto/rsa/rsa_lib.o \
+	../crypto/rsa/rsa_none.o \
+	../crypto/rsa/rsa_oaep.o \
+	../crypto/rsa/rsa_pk1.o \
+	../crypto/rsa/rsa_pss.o \
+	../crypto/rsa/rsa_ssl.o \
+	../crypto/rsa/rsa_x931.o \
+	../crypto/sha/sha1dgst.o \
+	../crypto/sha/sha256.o \
+	../crypto/sha/sha512.o \
+	../crypto/uid.o
 
 sub_all: build_all
 build_all: build_libs build_apps build_tests build_tools
 
-build_libs: build_crypto build_ssl build_engines
+build_libs: build_crypto build_fips build_ssl build_shared build_engines
 
 build_crypto:
-	@dir=crypto; target=all; $(BUILD_CMD)
+	if [ -n "$(FIPSCANLIB)" ]; then \
+		EXCL_OBJ='$(AES_ASM_OBJ) $(BN_ASM) $(DES_ENC) $(CPUID_OBJ) $(SHA1_ASM_OBJ) $(FIPS_EX_OBJ)' ; export EXCL_OBJ ; \
+		ARX='$(PERL) $${TOP}/util/arx.pl $(AR)' ; \
+	else \
+		ARX='${AR}' ; \
+	fi ; export ARX ; \
+		dir=crypto; target=all; $(BUILD_ONE_CMD)
+build_fips:
+	@dir=fips; target=all; [ -z "$(FIPSCANLIB)" ] || $(BUILD_ONE_CMD)
 build_ssl:
-	@dir=ssl; target=all; $(BUILD_CMD)
+	@dir=ssl; target=all; $(BUILD_ONE_CMD)
 build_engines:
-	@dir=engines; target=all; $(BUILD_CMD)
+	@dir=engines; target=all; $(BUILD_ONE_CMD)
 build_apps:
-	@dir=apps; target=all; $(BUILD_CMD)
+	@dir=apps; target=all; $(BUILD_ONE_CMD)
 build_tests:
-	@dir=test; target=all; $(BUILD_CMD)
+	@dir=test; target=all; $(BUILD_ONE_CMD)
 build_tools:
-	@dir=tools; target=all; $(BUILD_CMD)
+	@dir=tools; target=all; $(BUILD_ONE_CMD)
 
 all_testapps: build_libs build_testapps
 build_testapps:
-	@dir=crypto; target=testapps; $(BUILD_CMD)
+	@dir=crypto; target=testapps; $(BUILD_ONE_CMD)
 
-libcrypto$(SHLIB_EXT): libcrypto.a
+build_shared:	$(SHARED_LIBS)
+libcrypto$(SHLIB_EXT): libcrypto.a $(SHARED_FIPS)
 	@if [ "$(SHLIB_TARGET)" != "" ]; then \
-		$(MAKE) SHLIBDIRS=crypto build-shared; \
+		if [ "$(FIPSCANLIB)" = "libfips" ]; then \
+			$(ARD) libcrypto.a fipscanister.o ; \
+			$(MAKE) SHLIBDIRS='crypto' SHLIBDEPS='-lfips' build-shared; \
+			$(AR) libcrypto.a fips/fipscanister.o ; \
+		else \
+			if [ "$(FIPSCANLIB)" = "libcrypto" ]; then \
+				FIPSLD_CC=$(CC); CC=fips/fipsld; \
+				export CC FIPSLD_CC; \
+			fi; \
+			$(MAKE) -e SHLIBDIRS='crypto' build-shared; \
+		fi \
 	else \
 		echo "There's no support for shared libraries on this platform" >&2; \
 		exit 1; \
@@ -205,12 +369,32 @@ libcrypto$(SHLIB_EXT): libcrypto.a
 
 libssl$(SHLIB_EXT): libcrypto$(SHLIB_EXT) libssl.a
 	@if [ "$(SHLIB_TARGET)" != "" ]; then \
-		$(MAKE) SHLIBDIRS=ssl SHLIBDEPS='-lcrypto' build-shared; \
+		shlibdeps=-lcrypto; \
+		[ "$(FIPSCANLIB)" = "libfips" ] && shlibdeps="$$shlibdeps -lfips"; \
+		$(MAKE) SHLIBDIRS=ssl SHLIBDEPS="$$shlibdeps" build-shared; \
+	else \
+		echo "There's no support for shared libraries on this platform" >&2 ; \
+		exit 1; \
+	fi
+
+fips/fipscanister.o:	build_fips
+libfips$(SHLIB_EXT):		fips/fipscanister.o
+	@if [ "$(SHLIB_TARGET)" != "" ]; then \
+		FIPSLD_CC=$(CC); CC=fips/fipsld; export CC FIPSLD_CC; \
+		$(MAKE) -f Makefile.shared -e $(BUILDENV) \
+			CC=$${CC} LIBNAME=fips THIS=$@ \
+			LIBEXTRAS=fips/fipscanister.o \
+			LIBDEPS="$(EX_LIBS)" \
+			LIBVERSION=${SHLIB_MAJOR}.${SHLIB_MINOR} \
+			link_o.$(SHLIB_TARGET) || { rm -f $@; exit 1; } \
 	else \
 		echo "There's no support for shared libraries on this platform" >&2; \
 		exit 1; \
 	fi
 
+libfips.a:
+	dir=fips; target=all; $(BUILD_ONE_CMD)
+
 clean-shared:
 	@set -e; for i in $(SHLIBDIRS); do \
 		if [ -n "$(SHARED_LIBS_LINK_EXTS)" ]; then \
@@ -227,7 +411,7 @@ clean-shared:
 
 link-shared:
 	@ set -e; for i in ${SHLIBDIRS}; do \
-		$(MAKE) -f $(HERE)/Makefile.shared \
+		$(MAKE) -f $(HERE)/Makefile.shared -e $(BUILDENV) \
 			LIBNAME=$$i LIBVERSION=${SHLIB_MAJOR}.${SHLIB_MINOR} \
 			LIBCOMPATVERSIONS=";${SHLIB_VERSION_HISTORY}" \
 			symlink.$(SHLIB_TARGET); \
@@ -241,16 +425,40 @@ do_$(SHLIB_TARGET):
 		if [ "${SHLIBDIRS}" = "ssl" -a -n "$(LIBKRB5)" ]; then \
 			libs="$(LIBKRB5) $$libs"; \
 		fi; \
-		$(MAKE) -f Makefile.shared \
-			$(BUILDENV) \
+		$(CLEARENV) && $(MAKE) -f Makefile.shared -e $(BUILDENV) \
 			LIBNAME=$$i LIBVERSION=${SHLIB_MAJOR}.${SHLIB_MINOR} \
 			LIBCOMPATVERSIONS=";${SHLIB_VERSION_HISTORY}" \
 			LIBDEPS="$$libs $(EX_LIBS)" \
-			LIBRPATH="$(INSTALLTOP)/lib" \
 			link_a.$(SHLIB_TARGET); \
 		libs="-l$$i $$libs"; \
 	done
 
+libcrypto.pc: Makefile
+	@ ( echo 'prefix=$(INSTALLTOP)'; \
+	    echo 'exec_prefix=$${prefix}'; \
+	    echo 'libdir=$${exec_prefix}/lib'; \
+	    echo 'includedir=$${prefix}/include'; \
+	    echo ''; \
+	    echo 'Name: OpenSSL-libcrypto'; \
+	    echo 'Description: OpenSSL cryptography library'; \
+	    echo 'Version: '$(VERSION); \
+	    echo 'Requires: '; \
+	    echo 'Libs: -L$${libdir} -lcrypto $(EX_LIBS)'; \
+	    echo 'Cflags: -I$${includedir} $(KRB5_INCLUDES)' ) > libcrypto.pc
+
+libssl.pc: Makefile
+	@ ( echo 'prefix=$(INSTALLTOP)'; \
+	    echo 'exec_prefix=$${prefix}'; \
+	    echo 'libdir=$${exec_prefix}/lib'; \
+	    echo 'includedir=$${prefix}/include'; \
+	    echo ''; \
+	    echo 'Name: OpenSSL'; \
+	    echo 'Description: Secure Sockets Layer and cryptography libraries'; \
+	    echo 'Version: '$(VERSION); \
+	    echo 'Requires: '; \
+	    echo 'Libs: -L$${libdir} -lssl -lcrypto $(EX_LIBS)'; \
+	    echo 'Cflags: -I$${includedir} $(KRB5_INCLUDES)' ) > libssl.pc
+
 openssl.pc: Makefile
 	@ ( echo 'prefix=$(INSTALLTOP)'; \
 	    echo 'exec_prefix=$${prefix}'; \
@@ -270,19 +478,13 @@ Makefile: Makefile.org Configure config
 	@false
 
 libclean:
-	rm -f *.map *.so *.so.* engines/*.so *.a */lib */*/lib
+	rm -f *.map *.so *.so.* *.dll engines/*.so engines/*.dll *.a engines/*.a */lib */*/lib
 
 clean:	libclean
 	rm -f shlib/*.o *.o core a.out fluff rehash.time testlog make.log cctest cctest.c
-	@set -e; for i in $(DIRS) ;\
-	do \
-	if [ -d "$$i" ]; then \
-		(cd $$i && echo "making clean in $$i..." && \
-		$(MAKE) SDIRS='${SDIRS}' clean ) || exit 1; \
-		rm -f $(LIBS); \
-	fi; \
-	done;
-	rm -f openssl.pc
+	@set -e; target=clean; $(RECURSIVE_BUILD_CMD)
+	rm -f $(LIBS)
+	rm -f openssl.pc libssl.pc libcrypto.pc
 	rm -f speed.* .pure
 	rm -f $(TARFILE)
 	@set -e; for i in $(ONEDIRS) ;\
@@ -296,32 +498,23 @@ makefile.one: files
 
 files:
 	$(PERL) $(TOP)/util/files.pl Makefile > $(TOP)/MINFO
-	@set -e; for i in $(DIRS) ;\
-	do \
-	if [ -d "$$i" ]; then \
-		(cd $$i && echo "making 'files' in $$i..." && \
-		$(MAKE) SDIRS='${SDIRS}' PERL='${PERL}' files ) || exit 1; \
-	fi; \
-	done;
+	@set -e; target=files; $(RECURSIVE_BUILD_CMD)
 
 links:
 	@$(PERL) $(TOP)/util/mkdir-p.pl include/openssl
 	@$(PERL) $(TOP)/util/mklink.pl include/openssl $(EXHEADER)
-	@set -e; target=links; for dir in $(DIRS); do $(BUILD_CMD); done
+	@set -e; target=links; $(RECURSIVE_BUILD_CMD)
+	@if [ -z "$(FIPSCANLIB)" ]; then \
+		set -e; target=links; dir=fips ; $(BUILD_CMD) ; \
+	fi
 
 gentests:
 	@(cd test && echo "generating dummy tests (if needed)..." && \
-	$(MAKE) $(BUILDENV) TESTS='${TESTS}' OPENSSL_DEBUG_MEMORY=on generate );
+	$(CLEARENV) && $(MAKE) -e $(BUILDENV) TESTS='${TESTS}' OPENSSL_DEBUG_MEMORY=on generate );
 
 dclean:
 	rm -f *.bak
-	@set -e; for i in $(DIRS) ;\
-	do \
-	if [ -d "$$i" ]; then \
-		(cd $$i && echo "making dclean in $$i..." && \
-		$(MAKE) SDIRS='${SDIRS}' PERL='${PERL}' dclean ) || exit 1; \
-	fi; \
-	done;
+	@set -e; target=dclean; $(RECURSIVE_BUILD_CMD)
 
 rehash: rehash.time
 rehash.time: certs
@@ -335,29 +528,17 @@ test:   tests
 
 tests: rehash
 	@(cd test && echo "testing..." && \
-	$(MAKE) -e $(BUILDENV) TESTS='${TESTS}' OPENSSL_DEBUG_MEMORY=on tests );
+	$(CLEARENV) && $(MAKE) -e $(BUILDENV) TOP=.. TESTS='${TESTS}' OPENSSL_DEBUG_MEMORY=on tests );
 	util/opensslwrap.sh version -a
 
 report:
 	@$(PERL) util/selftest.pl
 
 depend:
-	@set -e; for i in $(DIRS) ;\
-	do \
-	if [ -d "$$i" ]; then \
-		(cd $$i && echo "making dependencies $$i..." && \
-		$(MAKE) SDIRS='${SDIRS}' CFLAG='-DOPENSSL_NO_DEPRECATED ${CFLAG}' DEPFLAG='${DEPFLAG}' MAKEDEPPROG='${MAKEDEPPROG}' KRB5_INCLUDES='${KRB5_INCLUDES}' PERL='${PERL}' depend ) || exit 1; \
-	fi; \
-	done;
+	@set -e; target=depend; $(RECURSIVE_BUILD_CMD)
 
 lint:
-	@set -e; for i in $(DIRS) ;\
-	do \
-	if [ -d "$$i" ]; then \
-		(cd $$i && echo "making lint $$i..." && \
-		$(MAKE) SDIRS='${SDIRS}' lint ) || exit 1; \
-	fi; \
-	done;
+	@set -e; target=lint; $(RECURSIVE_BUILD_CMD)
 
 tags:
 	rm -f TAGS
@@ -366,6 +547,7 @@ tags:
 errors:
 	$(PERL) util/mkerr.pl -recurse -write
 	(cd engines; $(MAKE) PERL=$(PERL) errors)
+	$(PERL) util/ck_errf.pl */*.c */*/*.c
 
 stacks:
 	$(PERL) util/mkstack.pl -write
@@ -384,11 +566,15 @@ crypto/objects/obj_mac.h: crypto/objects/objects.pl crypto/objects/objects.txt c
 apps/openssl-vms.cnf: apps/openssl.cnf
 	$(PERL) VMS/VMSify-conf.pl < apps/openssl.cnf > apps/openssl-vms.cnf
 
+crypto/bn/bn_prime.h: crypto/bn/bn_prime.pl
+	$(PERL) crypto/bn/bn_prime.pl >crypto/bn/bn_prime.h
+
+
 TABLE: Configure
 	(echo 'Output of `Configure TABLE'"':"; \
 	$(PERL) Configure TABLE) > TABLE
 
-update: depend errors stacks util/libeay.num util/ssleay.num crypto/objects/obj_dat.h apps/openssl-vms.cnf TABLE
+update: errors stacks util/libeay.num util/ssleay.num crypto/objects/obj_dat.h apps/openssl-vms.cnf crypto/bn/bn_prime.h TABLE depend
 
 # Build distribution tar-file. As the list of files returned by "find" is
 # pretty long, on several platforms a "too many arguments" error or similar
@@ -423,7 +609,7 @@ dist:
 	@$(MAKE) TAR='${TAR}' TARFLAGS='${TARFLAGS}' tar
 
 dist_pem_h:
-	(cd crypto/pem; $(MAKE) $(BUILDENV) pem.h; $(MAKE) clean)
+	(cd crypto/pem; $(MAKE) -e $(BUILDENV) pem.h; $(MAKE) clean)
 
 install: all install_docs install_sw
 
@@ -441,13 +627,7 @@ install_sw:
 	(cp $$i $(INSTALL_PREFIX)$(INSTALLTOP)/include/openssl/$$i; \
 	chmod 644 $(INSTALL_PREFIX)$(INSTALLTOP)/include/openssl/$$i ); \
 	done;
-	@set -e; for i in $(DIRS) ;\
-	do \
-	if [ -d "$$i" ]; then \
-		(cd $$i; echo "installing $$i..."; \
-		$(MAKE) $(BUILDENV) INSTALL_PREFIX='${INSTALL_PREFIX}' OPENSSLDIR='${OPENSSLDIR}' install ); \
-	fi; \
-	done
+	@set -e; target=install; $(RECURSIVE_BUILD_CMD)
 	@set -e; for i in $(LIBS) ;\
 	do \
 		if [ -f "$$i" ]; then \
@@ -469,13 +649,13 @@ install_sw:
 					chmod 555 $(INSTALL_PREFIX)$(INSTALLTOP)/lib/$$i.new; \
 					mv -f $(INSTALL_PREFIX)$(INSTALLTOP)/lib/$$i.new $(INSTALL_PREFIX)$(INSTALLTOP)/lib/$$i; \
 				else \
-					c=`echo $$i | sed 's/^lib/cyg/'`; \
+					c=`echo $$i | sed 's/^lib\(.*\)\.dll\.a/cyg\1-$(SHLIB_VERSION_NUMBER).dll/'`; \
 					cp $$c $(INSTALL_PREFIX)$(INSTALLTOP)/bin/$$c.new; \
 					chmod 755 $(INSTALL_PREFIX)$(INSTALLTOP)/bin/$$c.new; \
 					mv -f $(INSTALL_PREFIX)$(INSTALLTOP)/bin/$$c.new $(INSTALL_PREFIX)$(INSTALLTOP)/bin/$$c; \
-					cp $$i.a $(INSTALL_PREFIX)$(INSTALLTOP)/lib/$$i.a.new; \
-					chmod 644 $(INSTALL_PREFIX)$(INSTALLTOP)/lib/$$i.a.new; \
-					mv -f $(INSTALL_PREFIX)$(INSTALLTOP)/lib/$$i.a.new $(INSTALL_PREFIX)$(INSTALLTOP)/lib/$$i.a; \
+					cp $$i $(INSTALL_PREFIX)$(INSTALLTOP)/lib/$$i.new; \
+					chmod 644 $(INSTALL_PREFIX)$(INSTALLTOP)/lib/$$i.new; \
+					mv -f $(INSTALL_PREFIX)$(INSTALLTOP)/lib/$$i.new $(INSTALL_PREFIX)$(INSTALLTOP)/lib/$$i; \
 				fi ); \
 			fi; \
 		done; \
@@ -489,6 +669,10 @@ install_sw:
 			sed -e '1,/^$$/d' doc/openssl-shared.txt; \
 		fi; \
 	fi
+	cp libcrypto.pc $(INSTALL_PREFIX)$(INSTALLTOP)/lib/pkgconfig
+	chmod 644 $(INSTALL_PREFIX)$(INSTALLTOP)/lib/pkgconfig/libcrypto.pc
+	cp libssl.pc $(INSTALL_PREFIX)$(INSTALLTOP)/lib/pkgconfig
+	chmod 644 $(INSTALL_PREFIX)$(INSTALLTOP)/lib/pkgconfig/libssl.pc
 	cp openssl.pc $(INSTALL_PREFIX)$(INSTALLTOP)/lib/pkgconfig
 	chmod 644 $(INSTALL_PREFIX)$(INSTALLTOP)/lib/pkgconfig/openssl.pc
 
@@ -514,8 +698,8 @@ install_docs:
 			--release=$(VERSION) `basename $$i`") \
 			>  $(INSTALL_PREFIX)$(MANDIR)/man$$sec/$$fn.$${sec}$(MANSUFFIX); \
 		$(PERL) util/extract-names.pl < $$i | \
-			grep -v $$filecase "^$$fn\$$" | \
-			grep -v "[	]" | \
+			(grep -v $$filecase "^$$fn\$$"; true) | \
+			(grep -v "[	]"; true) | \
 			(cd $(INSTALL_PREFIX)$(MANDIR)/man$$sec/; \
 			 while read n; do \
 				$$here/util/point.sh $$fn.$${sec}$(MANSUFFIX) "$$n".$${sec}$(MANSUFFIX); \
@@ -531,8 +715,8 @@ install_docs:
 			--release=$(VERSION) `basename $$i`") \
 			>  $(INSTALL_PREFIX)$(MANDIR)/man$$sec/$$fn.$${sec}$(MANSUFFIX); \
 		$(PERL) util/extract-names.pl < $$i | \
-			grep -v $$filecase "^$$fn\$$" | \
-			grep -v "[	]" | \
+			(grep -v $$filecase "^$$fn\$$"; true) | \
+			(grep -v "[	]"; true) | \
 			(cd $(INSTALL_PREFIX)$(MANDIR)/man$$sec/; \
 			 while read n; do \
 				$$here/util/point.sh $$fn.$${sec}$(MANSUFFIX) "$$n".$${sec}$(MANSUFFIX); \

Makefile.shared

@@ -7,6 +7,7 @@
 
 # CC contains the current compiler.  This one MUST be defined
 CC=cc
+CFLAGS=$(CFLAG)
 # LDFLAGS contains flags to be used when temporary object files (when building
 # shared libraries) are created, or when an application is linked.
 # SHARED_LDFLAGS contains flags to be used when the shared library is created.
@@ -88,20 +89,26 @@ CALC_VERSIONS=	\
 
 LINK_APP=	\
   ( $(SET_X);   \
+    LIBDEPS="$${LIBDEPS:-$(LIBDEPS)}"; \
+    LDCMD="$${LDCMD:-$(CC)}"; LDFLAGS="$${LDFLAGS:-$(CFLAGS)}"; \
     LIBPATH=`for x in $$LIBDEPS; do if echo $$x | grep '^ *-L' > /dev/null 2>&1; then echo $$x | sed -e 's/^ *-L//'; fi; done | uniq`; \
     LIBPATH=`echo $$LIBPATH | sed -e 's/ /:/g'`; \
     LD_LIBRARY_PATH=$$LIBPATH:$$LD_LIBRARY_PATH \
-    $$LDCMD $$LDFLAGS -o $$APPNAME $(OBJECTS) $$LIBDEPS )
+    $${LDCMD} $${LDFLAGS} -o $${APPNAME:=$(APPNAME)} $(OBJECTS) $${LIBDEPS} )
 
 LINK_SO=	\
   ( $(SET_X);   \
-    nm -Pg $$SHOBJECTS | grep ' [BDT] ' | cut -f1 -d' ' > lib$(LIBNAME).exp; \
+    LIBDEPS="$${LIBDEPS:-$(LIBDEPS)}"; \
+    SHAREDCMD="$${SHAREDCMD:-$(CC)}"; \
+    SHAREDFLAGS="$${SHAREDFLAGS:-$(CFLAGS) $(SHARED_LDFLAGS)}"; \
     LIBPATH=`for x in $$LIBDEPS; do if echo $$x | grep '^ *-L' > /dev/null 2>&1; then echo $$x | sed -e 's/^ *-L//'; fi; done | uniq`; \
     LIBPATH=`echo $$LIBPATH | sed -e 's/ /:/g'`; \
     LD_LIBRARY_PATH=$$LIBPATH:$$LD_LIBRARY_PATH \
-    $$SHAREDCMD $$SHAREDFLAGS -o $$SHLIB$$SHLIB_SOVER$$SHLIB_SUFFIX \
-	$$ALLSYMSFLAGS $$SHOBJECTS $$NOALLSYMSFLAGS $$LIBDEPS ) && \
-  $(SYMLINK_SO); ( $(SET_X); rm -f lib$(LIBNAME).exp )
+    $${SHAREDCMD} $${SHAREDFLAGS} \
+	-o $$SHLIB$$SHLIB_SOVER$$SHLIB_SUFFIX \
+	$$ALLSYMSFLAGS $$SHOBJECTS $$NOALLSYMSFLAGS $$LIBDEPS \
+  ) && $(SYMLINK_SO)
+
 SYMLINK_SO=	\
 	if [ -n "$$INHIBIT_SYMLINKS" ]; then :; else \
 		prev=$$SHLIB$$SHLIB_SOVER$$SHLIB_SUFFIX; \
@@ -120,12 +127,14 @@ SYMLINK_SO=	\
 
 LINK_SO_A=	SHOBJECTS="lib$(LIBNAME).a $(LIBEXTRAS)"; $(LINK_SO)
 LINK_SO_O=	SHOBJECTS="$(LIBEXTRAS)"; $(LINK_SO)
+
 LINK_SO_A_VIA_O=	\
   SHOBJECTS=lib$(LIBNAME).o; \
   ALL=$$ALLSYMSFLAGS; ALLSYMSFLAGS=; NOALLSYMSFLAGS=; \
   ( $(SET_X); \
     ld $(LDFLAGS) -r -o lib$(LIBNAME).o $$ALL lib$(LIBNAME).a $(LIBEXTRAS) ); \
   $(LINK_SO) && rm -f $(LIBNAME).o
+
 LINK_SO_A_UNPACKED=	\
   UNPACKDIR=link_tmp.$$$$; rm -rf $$UNPACKDIR; mkdir $$UNPACKDIR; \
   (cd $$UNPACKDIR; ar x ../lib$(LIBNAME).a) && \
@@ -138,15 +147,11 @@ DETECT_GNU_LD=(${CC} -Wl,-V /dev/null 2>&1 | grep '^GNU ld' )>/dev/null
 DO_GNU_SO=$(CALC_VERSIONS); \
 	SHLIB=lib$(LIBNAME).so; \
 	SHLIB_SUFFIX=; \
-	LIBDEPS="$(LIBDEPS)"; \
 	ALLSYMSFLAGS='-Wl,--whole-archive'; \
 	NOALLSYMSFLAGS='-Wl,--no-whole-archive'; \
-	SHAREDFLAGS="$(CFLAGS) $(SHARED_LDFLAGS) -shared -Wl,-Bsymbolic -Wl,-soname=$$SHLIB$$SHLIB_SOVER$$SHLIB_SUFFIX -Wl,-rpath,$(LIBRPATH)"; \
-	SHAREDCMD='$(CC)'
-DO_GNU_APP=LDCMD=$(CC);\
-	LDFLAGS="$(CFLAGS) -Wl,-rpath,$(LIBRPATH)"; \
-	LIBDEPS="$(LIBDEPS)"; \
-	APPNAME=$(APPNAME)
+	SHAREDFLAGS="$(CFLAGS) $(SHARED_LDFLAGS) -shared -Wl,-Bsymbolic -Wl,-soname=$$SHLIB$$SHLIB_SOVER$$SHLIB_SUFFIX"
+
+DO_GNU_APP=LDFLAGS="$(CFLAGS) -Wl,-rpath,$(LIBRPATH)"
 
 #This is rather special.  It's a special target with which one can link
 #applications without bothering with any features that have anything to
@@ -154,10 +159,6 @@ DO_GNU_APP=LDCMD=$(CC);\
 #libraries.  It's mostly here to avoid a lot of conditionals everywhere
 #else...
 link_app.:
-	LDCMD=$(CC); \
-	LDFLAGS="$(CFLAGS)"; \
-	LIBDEPS="$(LIBDEPS)"; \
-	APPNAME="$(APPNAME)"; \
 	$(LINK_APP)
 
 link_o.gnu:
@@ -172,41 +173,40 @@ link_o.bsd:
 	$(CALC_VERSIONS); \
 	SHLIB=lib$(LIBNAME).so; \
 	SHLIB_SUFFIX=; \
-	LIBDEPS=; \
+	LIBDEPS=" "; \
 	ALLSYMSFLAGS="-Wl,-Bforcearchive"; \
 	NOALLSYMSFLAGS=; \
-	SHAREDFLAGS="$(CFLAGS) -shared -nostdlib"; \
-	SHAREDCMD=$(CC); \
+	SHAREDFLAGS="$(CFLAGS) $(SHARED_LDFLAGS) -shared -nostdlib"; \
 	fi; $(LINK_SO_O)
 link_a.bsd:
 	@if ${DETECT_GNU_LD}; then $(DO_GNU_SO); else \
 	$(CALC_VERSIONS); \
 	SHLIB=lib$(LIBNAME).so; \
 	SHLIB_SUFFIX=; \
-	LIBDEPS=; \
+	LIBDEPS=" "; \
 	ALLSYMSFLAGS="-Wl,-Bforcearchive"; \
 	NOALLSYMSFLAGS=; \
-	SHAREDFLAGS="$(CFLAGS) -shared -nostdlib"; \
-	SHAREDCMD=$(CC); \
+	SHAREDFLAGS="$(CFLAGS) $(SHARED_LDFLAGS) -shared -nostdlib"; \
 	fi; $(LINK_SO_A)
 link_app.bsd:
 	@if ${DETECT_GNU_LD}; then $(DO_GNU_APP); else \
-	LDCMD=$(CC); \
 	LDFLAGS="$(CFLAGS) -Wl,-rpath,$(LIBPATH)"; \
-	LIBDEPS="$(LIBDEPS)"; \
-	APPNAME="$(APPNAME)"; \
 	fi; $(LINK_APP)
 
 # For Darwin AKA Mac OS/X (dyld)
+# link_o.darwin produces .so, because we let it use dso_dlfcn module,
+# which has .so extension hard-coded. One can argue that one should
+# develop special dso module for MacOS X. At least manual encourages
+# to use native NSModule(3) API and refers to dlfcn as termporary hack.
 link_o.darwin:
 	@ $(CALC_VERSIONS); \
-	SHLIB=lib$(LIBNAME); \
-	SHLIB_SUFFIX=.dylib; \
-	LIBDEPS="$(LIBDEPS)"; \
+	SHLIB=`expr "$$THIS" : '.*/\([^/\.]*\)\.'`; \
+	SHLIB=$${SHLIB:-lib$(LIBNAME)}; \
+	SHLIB_SUFFIX=`expr "$$THIS" : '.*\(\.[^\.]*\)$$'`; \
+	SHLIB_SUFFIX=$${SHLIB_SUFFIX:-.so}; \
 	ALLSYMSFLAGS='-all_load'; \
 	NOALLSYMSFLAGS=''; \
-	SHAREDFLAGS="$(CFLAGS) -dynamiclib"; \
-	SHAREDCMD='$(CC)'; \
+	SHAREDFLAGS="$(CFLAGS) $(SHARED_LDFLAGS)"; \
 	if [ -n "$(LIBVERSION)" ]; then \
 		SHAREDFLAGS="$$SHAREDFLAGS -current_version $(LIBVERSION)"; \
 	fi; \
@@ -218,61 +218,55 @@ link_a.darwin:
 	@ $(CALC_VERSIONS); \
 	SHLIB=lib$(LIBNAME); \
 	SHLIB_SUFFIX=.dylib; \
-	LIBDEPS="$(LIBDEPS)"; \
 	ALLSYMSFLAGS='-all_load'; \
 	NOALLSYMSFLAGS=''; \
-	SHAREDFLAGS="$(CFLAGS) -dynamiclib"; \
-	SHAREDCMD='$(CC)'; \
+	SHAREDFLAGS="$(CFLAGS) $(SHARED_LDFLAGS)"; \
 	if [ -n "$(LIBVERSION)" ]; then \
 		SHAREDFLAGS="$$SHAREDFLAGS -current_version $(LIBVERSION)"; \
 	fi; \
 	if [ -n "$$SHLIB_SOVER_NODOT" ]; then \
 		SHAREDFLAGS="$$SHAREDFLAGS -compatibility_version $$SHLIB_SOVER_NODOT"; \
 	fi; \
+	SHAREDFLAGS="$$SHAREDFLAGS -install_name ${INSTALLTOP}/lib/$$SHLIB${SHLIB_EXT}"; \
 	$(LINK_SO_A)
-link_app.darwin:
-	LDCMD=$(CC);\
-	LDFLAGS="$(CFLAGS)"; \
-	LIBDEPS="$(LIBDEPS)"; \
-	APPNAME="$(APPNAME)"; \
+link_app.darwin:	# is there run-path on darwin?
 	$(LINK_APP)
 
 link_o.cygwin:
 	@ $(CALC_VERSIONS); \
 	INHIBIT_SYMLINKS=yes; \
 	SHLIB=cyg$(LIBNAME); \
-	expr $(PLATFORM) : 'mingw' > /dev/null && SHLIB=$(LIBNAME)eay32; \
+	base=-Wl,--enable-auto-image-base; \
+	if expr $(PLATFORM) : 'mingw' > /dev/null; then \
+		SHLIB=$(LIBNAME)eay32; base=; \
+	fi; \
 	SHLIB_SUFFIX=.dll; \
-	LIBDEPS="$(LIBDEPS)"; \
-	SHLIB_SOVER=-$(LIBVERSION); \
+	LIBVERSION="$(LIBVERSION)"; \
+	SHLIB_SOVER=${LIBVERSION:+"-$(LIBVERSION)"}; \
 	ALLSYMSFLAGS='-Wl,--whole-archive'; \
 	NOALLSYMSFLAGS='-Wl,--no-whole-archive'; \
-	SHAREDFLAGS="$(CFLAGS) -Wl,-Bsymbolic -Wl,--out-implib,lib$(LIBNAME).dll.a"; \
-	SHAREDCMD='${CC}'; \
+	SHAREDFLAGS="$(CFLAGS) $(SHARED_LDFLAGS) -shared $$base -Wl,-Bsymbolic -Wl,--out-implib,lib$(LIBNAME).dll.a"; \
 	$(LINK_SO_O)
 link_a.cygwin:
 	@ $(CALC_VERSIONS); \
 	INHIBIT_SYMLINKS=yes; \
 	SHLIB=cyg$(LIBNAME); \
-	expr $(PLATFORM) : 'mingw' > /dev/null && SHLIB=$(LIBNAME)eay32; \
+	base=-Wl,--enable-auto-image-base; \
+	if expr $(PLATFORM) : 'mingw' > /dev/null; then \
+		SHLIB=$(LIBNAME)eay32; \
+		base=;  [ $(LIBNAME) = "crypto" ] && base=-Wl,--image-base,0x63000000; \
+	fi; \
 	SHLIB_SUFFIX=.dll; \
-	LIBDEPS="$(LIBDEPS)"; \
-	SHLIB_SOVER=; \
+	SHLIB_SOVER=-$(LIBVERSION); \
 	ALLSYMSFLAGS='-Wl,--whole-archive'; \
 	NOALLSYMSFLAGS='-Wl,--no-whole-archive'; \
-	base=;  [ $(LIBNAME) = "crypto" ] && base=-Wl,--image-base,0x61200000; \
-	SHAREDFLAGS="$(CFLAGS) $$base -Wl,-Bsymbolic -Wl,--out-implib,lib$(LIBNAME).dll.a"; \
-	SHAREDCMD='${CC}'; \
+	SHAREDFLAGS="$(CFLAGS) $(SHARED_LDFLAGS) -shared $$base -Wl,-Bsymbolic -Wl,--out-implib,lib$(LIBNAME).dll.a"; \
 	[ -f apps/$$SHLIB$$SHLIB_SUFFIX ] && rm apps/$$SHLIB$$SHLIB_SUFFIX; \
 	[ -f test/$$SHLIB$$SHLIB_SUFFIX ] && rm test/$$SHLIB$$SHLIB_SUFFIX; \
 	$(LINK_SO_A) || exit 1; \
-	cp -p $$SHLIB$$SHLIB_SUFFIX apps/; \
-	cp -p $$SHLIB$$SHLIB_SUFFIX test/
+	cp -p $$SHLIB$$SHLIB_SOVER$$SHLIB_SUFFIX apps/; \
+	cp -p $$SHLIB$$SHLIB_SOVER$$SHLIB_SUFFIX test/
 link_app.cygwin:
-	LDCMD=$(CC);\
-	LDFLAGS="$(CFLAGS)"; \
-	LIBDEPS="$(LIBDEPS)"; \
-	APPNAME="$(APPNAME)"; \
 	$(LINK_APP)
 
 link_o.alpha-osf1:
@@ -281,7 +275,6 @@ link_o.alpha-osf1:
 	else \
 		SHLIB=lib$(LIBNAME).so; \
 		SHLIB_SUFFIX=; \
-		LIBDEPS="$(LIBDEPS)"; \
 		SHLIB_HIST=`echo "$(LIBCOMPATVERSIONS)" | cut -d';' -f2 | sed -e 's/ */:/'`; \
 		if [ -n "$$SHLIB_HIST" ]; then \
 			SHLIB_HIST="$${SHLIB_HIST}:$(LIBVERSION)"; \
@@ -291,10 +284,9 @@ link_o.alpha-osf1:
 		SHLIB_SOVER=; \
 		ALLSYMSFLAGS='-all'; \
 		NOALLSYMSFLAGS='-none'; \
-		SHAREDFLAGS="$(CFLAGS) -shared"; \
-		SHAREDCMD='$(CC)'; \
+		SHAREDFLAGS="$(CFLAGS) $(SHARED_LDFLAGS) -shared -Wl,-B,symbolic"; \
 		if [ -n "$$SHLIB_HIST" ]; then \
-			SHAREDFLAGS="$$SHAREDFLAGS -set_version \"$$SHLIB_HIST\""; \
+			SHAREDFLAGS="$$SHAREDFLAGS -set_version $$SHLIB_HIST"; \
 		fi; \
 	fi; \
 	$(LINK_SO_O)
@@ -304,7 +296,6 @@ link_a.alpha-osf1:
 	else \
 		SHLIB=lib$(LIBNAME).so; \
 		SHLIB_SUFFIX=; \
-		LIBDEPS="$(LIBDEPS)"; \
 		SHLIB_HIST=`echo "$(LIBCOMPATVERSIONS)" | cut -d';' -f2 | sed -e 's/ */:/'`; \
 		if [ -n "$$SHLIB_HIST" ]; then \
 			SHLIB_HIST="$${SHLIB_HIST}:$(LIBVERSION)"; \
@@ -314,139 +305,17 @@ link_a.alpha-osf1:
 		SHLIB_SOVER=; \
 		ALLSYMSFLAGS='-all'; \
 		NOALLSYMSFLAGS='-none'; \
-		SHAREDFLAGS="$(CFLAGS) -shared"; \
-		SHAREDCMD='$(CC)'; \
+		SHAREDFLAGS="$(CFLAGS) $(SHARED_LDFLAGS) -shared -Wl,-B,symbolic"; \
 		if [ -n "$$SHLIB_HIST" ]; then \
-			SHAREDFLAGS="$$SHAREDFLAGS -set_version \"$$SHLIB_HIST\""; \
+			SHAREDFLAGS="$$SHAREDFLAGS -set_version $$SHLIB_HIST"; \
 		fi; \
 	fi; \
 	$(LINK_SO_A)
 link_app.alpha-osf1:
-	@ if ${DETECT_GNU_LD}; then \
+	@if ${DETECT_GNU_LD}; then \
 		$(DO_GNU_APP); \
 	else \
-		LDCMD=$(CC);\
-		LDFLAGS="$(CFLAGS)"; \
-		LIBDEPS="$(LIBDEPS)"; \
-		APPNAME="$(APPNAME)"
-	fi; \
-	$(LINK_APP)
-
-# The difference between alpha-osf1-shared and tru64-shared is the `-msym'
-# option passed to the linker.
-link_o.tru64:
-	@ if ${DETECT_GNU_LD}; then \
-		$(DO_GNU_SO); \
-	else \
-		SHLIB=lib$(LIBNAME).so; \
-		SHLIB_SUFFIX=; \
-		LIBDEPS="$(LIBDEPS)"; \
-		SHLIB_HIST=`echo "$(LIBCOMPATVERSIONS)" | cut -d';' -f2 | sed -e 's/ */:/'`; \
-		if [ -n "$$SHLIB_HIST" ]; then \
-			SHLIB_HIST="$${SHLIB_HIST}:$(LIBVERSION)"; \
-		else \
-			SHLIB_HIST="$(LIBVERSION)"; \
-		fi; \
-		SHLIB_SOVER=; \
-		ALLSYMSFLAGS='-all'; \
-		NOALLSYMSFLAGS='-none'; \
-		SHAREDFLAGS="$(CFLAGS) -shared -msym -rpath $(LIBRPATH)"; \
-		SHAREDCMD='$(CC)'; \
-		if [ -n "$$SHLIB_HIST" ]; then \
-			SHAREDFLAGS="$$SHAREDFLAGS -set_version \"$$SHLIB_HIST\""; \
-		fi; \
-	fi; \
-	$(LINK_SO_O)
-link_a.tru64:
-	@ if ${DETECT_GNU_LD}; then \
-		$(DO_GNU_SO); \
-	else \
-		SHLIB=lib$(LIBNAME).so; \
-		SHLIB_SUFFIX=; \
-		LIBDEPS="$(LIBDEPS)"; \
-		SHLIB_HIST=`echo "$(LIBCOMPATVERSIONS)" | cut -d';' -f2 | sed -e 's/ */:/'`; \
-		if [ -n "$$SHLIB_HIST" ]; then \
-			SHLIB_HIST="$${SHLIB_HIST}:$(LIBVERSION)"; \
-		else \
-			SHLIB_HIST="$(LIBVERSION)"; \
-		fi; \
-		SHLIB_SOVER=; \
-		ALLSYMSFLAGS='-all'; \
-		NOALLSYMSFLAGS='-none'; \
-		SHAREDFLAGS="$(CFLAGS) -shared -msym -rpath $(LIBRPATH)"; \
-		SHAREDCMD='$(CC)'; \
-		if [ -n "$$SHLIB_HIST" ]; then \
-			SHAREDFLAGS="$$SHAREDFLAGS -set_version \"$$SHLIB_HIST\""; \
-		fi; \
-	fi; \
-	$(LINK_SO_A)
-link_app.tru64:
-	@ if ${DETECT_GNU_LD}; then \
-		$(DO_GNU_APP); \
-	else \
-		LDCMD=$(CC);\
 		LDFLAGS="$(CFLAGS) -rpath $(LIBRPATH)"; \
-		LIBDEPS="$(LIBDEPS)"; \
-		APPNAME="$(APPNAME)"; \
-	fi; \
-	$(LINK_APP)
-
-# The difference between tru64-shared and tru64-shared-rpath is the
-# -rpath ${LIBRPATH} passed to the linker.
-link_o.tru64-rpath:
-	@ if ${DETECT_GNU_LD}; then \
-		$(DO_GNU_SO); \
-	else \
-		SHLIB=lib$(LIBNAME).so; \
-		SHLIB_SUFFIX=; \
-		LIBDEPS="$(LIBDEPS)"; \
-		SHLIB_HIST=`echo "$(LIBCOMPATVERSIONS)" | cut -d';' -f2 | sed -e 's/ */:/'`; \
-		if [ -n "$$SHLIB_HIST" ]; then \
-			SHLIB_HIST="$${SHLIB_HIST}:$(LIBVERSION)"; \
-		else \
-			SHLIB_HIST="$(LIBVERSION)"; \
-		fi; \
-		SHLIB_SOVER=; \
-		ALLSYMSFLAGS='-all'; \
-		NOALLSYMSFLAGS='-none'; \
-		SHAREDFLAGS="$(CFLAGS) -shared -msym -rpath $(LIBRPATH)"; \
-		SHAREDCMD='$(CC)'; \
-		if [ -n "$$SHLIB_HIST" ]; then \
-			SHAREDFLAGS="$$SHAREDFLAGS -set_version \"$$SHLIB_HIST\""; \
-		fi; \
-	fi; \
-	$(LINK_SO_O)
-link_a.tru64-rpath:
-	@ if ${DETECT_GNU_LD}; then \
-		$(DO_GNU_SO); \
-	else \
-		SHLIB=lib$(LIBNAME).so; \
-		SHLIB_SUFFIX=; \
-		LIBDEPS="$(LIBDEPS)"; \
-		SHLIB_HIST=`echo "$(LIBCOMPATVERSIONS)" | cut -d';' -f2 | sed -e 's/ */:/'`; \
-		if [ -n "$$SHLIB_HIST" ]; then \
-			SHLIB_HIST="$${SHLIB_HIST}:$(LIBVERSION)"; \
-		else \
-			SHLIB_HIST="$(LIBVERSION)"; \
-		fi; \
-		SHLIB_SOVER=; \
-		ALLSYMSFLAGS='-all'; \
-		NOALLSYMSFLAGS='-none'; \
-		SHAREDFLAGS="$(CFLAGS) -shared -msym -rpath $(LIBRPATH)"; \
-		SHAREDCMD='$(CC)'; \
-		if [ -n "$$SHLIB_HIST" ]; then \
-			SHAREDFLAGS="$$SHAREDFLAGS -set_version \"$$SHLIB_HIST\""; \
-		fi; \
-	fi; \
-	$(LINK_SO_A)
-link_app.tru64-rpath:
-	@ if ${DETECT_GNU_LD}; then \
-		$(DO_GNU_APP); \
-	else \
-		LDCMD=$(CC);\
-		LDFLAGS="$(CFLAGS) -rpath $(LIBRPATH)"; \
-		LIBDEPS="$(LIBDEPS)"; \
-		APPNAME="$(APPNAME)"; \
 	fi; \
 	$(LINK_APP)
 
@@ -456,14 +325,12 @@ link_o.solaris:
 	else \
 		$(CALC_VERSIONS); \
 		MINUSZ='-z '; \
-		(${CC} -v 2>&1 | grep gcc) > /dev/null && MINUSZ='-Wl,-z,'; \
+		($(CC) -v 2>&1 | grep gcc) > /dev/null && MINUSZ='-Wl,-z,'; \
 		SHLIB=lib$(LIBNAME).so; \
 		SHLIB_SUFFIX=; \
-		LIBDEPS="$(LIBDEPS)"; \
 		ALLSYMSFLAGS="$${MINUSZ}allextract"; \
 		NOALLSYMSFLAGS="$${MINUSZ}defaultextract"; \
-		SHAREDFLAGS="$(CFLAGS) $(SHARED_LDFLAGS) -h $$SHLIB$$SHLIB_SOVER$$SHLIB_SUFFIX -R $(LIBRPATH) -Wl,-Bsymbolic"; \
-		SHAREDCMD='$(CC)'; \
+		SHAREDFLAGS="$(CFLAGS) $(SHARED_LDFLAGS) -h $$SHLIB$$SHLIB_SOVER$$SHLIB_SUFFIX -Wl,-Bsymbolic"; \
 	fi; \
 	$(LINK_SO_O)
 link_a.solaris:
@@ -475,21 +342,16 @@ link_a.solaris:
 		(${CC} -v 2>&1 | grep gcc) > /dev/null && MINUSZ='-Wl,-z,'; \
 		SHLIB=lib$(LIBNAME).so; \
 		SHLIB_SUFFIX=;\
-		LIBDEPS="$(LIBDEPS)"; \
 		ALLSYMSFLAGS="$${MINUSZ}allextract"; \
 		NOALLSYMSFLAGS="$${MINUSZ}defaultextract"; \
-		SHAREDFLAGS="$(CFLAGS) $(SHARED_LDFLAGS) -h $$SHLIB$$SHLIB_SOVER$$SHLIB_SUFFIX -R $(LIBRPATH) -Wl,-Bsymbolic"; \
-		SHAREDCMD='$(CC)'; \
+		SHAREDFLAGS="$(CFLAGS) $(SHARED_LDFLAGS) -h $$SHLIB$$SHLIB_SOVER$$SHLIB_SUFFIX -Wl,-Bsymbolic"; \
 	fi; \
 	$(LINK_SO_A)
 link_app.solaris:
 	@ if ${DETECT_GNU_LD}; then \
 		$(DO_GNU_APP); \
 	else \
-		LDCMD=$(CC);\
 		LDFLAGS="$(CFLAGS) -R $(LIBRPATH)"; \
-		LIBDEPS="$(LIBDEPS)"; \
-		APPNAME="$(APPNAME)"; \
 	fi; \
 	$(LINK_APP)
 
@@ -501,11 +363,9 @@ link_o.svr3:
 		$(CALC_VERSIONS); \
 		SHLIB=lib$(LIBNAME).so; \
 		SHLIB_SUFFIX=; \
-		LIBDEPS="$(LIBDEPS)"; \
 		ALLSYMSFLAGS=''; \
 		NOALLSYMSFLAGS=''; \
 		SHAREDFLAGS="$(CFLAGS) -G -h $$SHLIB$$SHLIB_SOVER$$SHLIB_SUFFIX"; \
-		SHAREDCMD='$(CC)'; \
 	fi; \
 	$(LINK_SO_O)
 link_a.svr3:
@@ -515,22 +375,13 @@ link_a.svr3:
 		$(CALC_VERSIONS); \
 		SHLIB=lib$(LIBNAME).so; \
 		SHLIB_SUFFIX=; \
-		LIBDEPS="$(LIBDEPS)"; \
 		ALLSYMSFLAGS=''; \
 		NOALLSYMSFLAGS=''; \
 		SHAREDFLAGS="$(CFLAGS) -G -h $$SHLIB$$SHLIB_SOVER$$SHLIB_SUFFIX"; \
-		SHAREDCMD='$(CC)'; \
 	fi; \
 	$(LINK_SO_A_UNPACKED)
 link_app.svr3:
-	@ if ${DETECT_GNU_LD}; then \
-		$(DO_GNU_APP); \
-	else \
-		LDCMD=$(CC);\
-		LDFLAGS="$(CFLAGS)"; \
-		LIBDEPS="$(LIBDEPS)"; \
-		APPNAME="$(APPNAME)"; \
-	fi; \
+	@${DETECT_GNU_LD} && $(DO_GNU_APP); \
 	$(LINK_APP)
 
 # UnixWare 7 and OpenUNIX 8 native compilers used
@@ -540,14 +391,12 @@ link_o.svr5:
 	else \
 		$(CALC_VERSIONS); \
 		SHARE_FLAG='-G'; \
-		(${CC} -v 2>&1 | grep gcc) > /dev/null && SHARE_FLAG='-shared'; \
+		($(CC) -v 2>&1 | grep gcc) > /dev/null && SHARE_FLAG='-shared'; \
 		SHLIB=lib$(LIBNAME).so; \
 		SHLIB_SUFFIX=; \
-		LIBDEPS="$(LIBDEPS)"; \
 		ALLSYMSFLAGS=''; \
 		NOALLSYMSFLAGS=''; \
 		SHAREDFLAGS="$(CFLAGS) $${SHARE_FLAG} -h $$SHLIB$$SHLIB_SOVER$$SHLIB_SUFFIX"; \
-		SHAREDCMD='$(CC)'; \
 	fi; \
 	$(LINK_SO_O)
 link_a.svr5:
@@ -559,22 +408,13 @@ link_a.svr5:
 		(${CC} -v 2>&1 | grep gcc) > /dev/null && SHARE_FLAG='-shared'; \
 		SHLIB=lib$(LIBNAME).so; \
 		SHLIB_SUFFIX=; \
-		LIBDEPS="$(LIBDEPS)"; \
 		ALLSYMSFLAGS=''; \
 		NOALLSYMSFLAGS=''; \
 		SHAREDFLAGS="$(CFLAGS) $${SHARE_FLAG} -h $$SHLIB$$SHLIB_SOVER$$SHLIB_SUFFIX"; \
-		SHAREDCMD='$(CC)'; \
 	fi; \
 	$(LINK_SO_A_UNPACKED)
 link_app.svr5:
-	@ if ${DETECT_GNU_LD}; then \
-		$(DO_GNU_APP); \
-	else \
-		LDCMD=$(CC);\
-		LDFLAGS="$(CFLAGS)"; \
-		LIBDEPS="$(LIBDEPS)"; \
-		APPNAME="$(APPNAME)"; \
-	fi; \
+	@${DETECT_GNU_LD} && $(DO_GNU_APP); \
 	$(LINK_APP)
 
 link_o.irix:
@@ -584,13 +424,11 @@ link_o.irix:
 		$(CALC_VERSIONS); \
 		SHLIB=lib$(LIBNAME).so; \
 		SHLIB_SUFFIX=; \
-		LIBDEPS="$(LIBDEPS)"; \
 		MINUSWL=""; \
 		($(CC) -v 2>&1 | grep gcc) > /dev/null && MINUSWL="-Wl,"; \
 		ALLSYMSFLAGS="$${MINUSWL}-all"; \
 		NOALLSYMSFLAGS="$${MINUSWL}-none"; \
-		SHAREDFLAGS="$(CFLAGS) -shared -Wl,-soname,$$SHLIB$$SHLIB_SOVER$$SHLIB_SUFFIX -Wl,-rpath,$(LIBRPATH)"; \
-		SHAREDCMD='$(CC)'; \
+		SHAREDFLAGS="$(CFLAGS) $(SHARED_LDFLAGS) -shared -Wl,-soname,$$SHLIB$$SHLIB_SOVER$$SHLIB_SUFFIX,-B,symbolic"; \
 	fi; \
 	$(LINK_SO_O)
 link_a.irix:
@@ -600,24 +438,15 @@ link_a.irix:
 		$(CALC_VERSIONS); \
 		SHLIB=lib$(LIBNAME).so; \
 		SHLIB_SUFFIX=; \
-		LIBDEPS="$(LIBDEPS)"; \
 		MINUSWL=""; \
 		($(CC) -v 2>&1 | grep gcc) > /dev/null && MINUSWL="-Wl,"; \
 		ALLSYMSFLAGS="$${MINUSWL}-all"; \
 		NOALLSYMSFLAGS="$${MINUSWL}-none"; \
-		SHAREDFLAGS="$(CFLAGS) -shared -Wl,-soname,$$SHLIB$$SHLIB_SOVER$$SHLIB_SUFFIX -Wl,-rpath,$(LIBRPATH)"; \
-		SHAREDCMD='$(CC)'; \
+		SHAREDFLAGS="$(CFLAGS) $(SHARED_LDFLAGS) -shared -Wl,-soname,$$SHLIB$$SHLIB_SOVER$$SHLIB_SUFFIX,-B,symbolic"; \
 	fi; \
 	$(LINK_SO_A)
 link_app.irix:
-	@ if ${DETECT_GNU_LD}; then \
-		$(DO_GNU_APP); \
-	else \
-		LDCMD=$(CC);\
-		LDFLAGS="$(CFLAGS) -Wl,-rpath,$(LIBRPATH)"; \
-		LIBDEPS="$(LIBDEPS)"; \
-		APPNAME="$(APPNAME)"; \
-	fi; \
+	@LDFLAGS="$(CFLAGS) -Wl,-rpath,$(LIBRPATH)"; \
 	$(LINK_APP)
 
 # 32-bit PA-RISC HP-UX embeds the -L pathname of libs we link with, so
@@ -632,15 +461,14 @@ link_o.hpux:
 	@if ${DETECT_GNU_LD}; then $(DO_GNU_SO); else \
 	$(CALC_VERSIONS); \
 	SHLIB=lib$(LIBNAME).sl; \
-	expr $(PLATFORM) : '.*ia64' > /dev/null && SHLIB=lib$(LIBNAME).so; \
+	expr "$(CFLAGS)" : '.*DSO_DLFCN' > /dev/null && SHLIB=lib$(LIBNAME).so; \
 	SHLIB_SUFFIX=; \
-	LIBDEPS="$(LIBDEPS)"; \
 	ALLSYMSFLAGS='-Wl,-Fl'; \
 	NOALLSYMSFLAGS=''; \
 	expr $(PLATFORM) : 'hpux64' > /dev/null && ALLSYMSFLAGS='-Wl,+forceload'; \
-	SHAREDFLAGS="$(CFLAGS) -Wl,-B,symbolic,+vnocompatwarnings,-z,+s,+cdp,../:,+cdp,./:,+h,$$SHLIB$$SHLIB_SOVER$$SHLIB_SUFFIX,+b,$(LIBRPATH)"; \
-	SHAREDCMD=$(CC); \
+	SHAREDFLAGS="$(CFLAGS) $(SHARED_LDFLAGS) -Wl,-B,symbolic,+vnocompatwarnings,-z,+s,+h,$$SHLIB$$SHLIB_SOVER$$SHLIB_SUFFIX,+cdp,../:,+cdp,./:"; \
 	fi; \
+	rm -f $$SHLIB$$SHLIB_SOVER$$SHLIB_SUFFIX || :; \
 	$(LINK_SO_O) && chmod a=rx $$SHLIB$$SHLIB_SOVER$$SHLIB_SUFFIX
 link_a.hpux:
 	@if ${DETECT_GNU_LD}; then $(DO_GNU_SO); else \
@@ -648,79 +476,60 @@ link_a.hpux:
 	SHLIB=lib$(LIBNAME).sl; \
 	expr $(PLATFORM) : '.*ia64' > /dev/null && SHLIB=lib$(LIBNAME).so; \
 	SHLIB_SUFFIX=; \
-	LIBDEPS="$(LIBDEPS)"; \
 	ALLSYMSFLAGS='-Wl,-Fl'; \
 	NOALLSYMSFLAGS=''; \
 	expr $(PLATFORM) : 'hpux64' > /dev/null && ALLSYMSFLAGS='-Wl,+forceload'; \
-	SHAREDFLAGS="$(CFLAGS) -Wl,-B,symbolic,+vnocompatwarnings,-z,+s,+cdp,../:,+cdp,./:,+h,$$SHLIB$$SHLIB_SOVER$$SHLIB_SUFFIX,+b,$(LIBRPATH)"; \
-	SHAREDCMD='$(CC)'; \
+	SHAREDFLAGS="$(CFLAGS) $(SHARED_LDFLAGS) -Wl,-B,symbolic,+vnocompatwarnings,-z,+s,+h,$$SHLIB$$SHLIB_SOVER$$SHLIB_SUFFIX,+cdp,../:,+cdp,./:"; \
 	fi; \
+	rm -f $$SHLIB$$SHLIB_SOVER$$SHLIB_SUFFIX || :; \
 	$(LINK_SO_A) && chmod a=rx $$SHLIB$$SHLIB_SOVER$$SHLIB_SUFFIX
 link_app.hpux:
 	@if ${DETECT_GNU_LD}; then $(DO_GNU_APP); else \
-	LDCMD=$(CC);\
 	LDFLAGS="$(CFLAGS) -Wl,+s,+cdp,../:,+cdp,./:,+b,$(LIBRPATH)"; \
-	LIBDEPS="$(LIBDEPS)"; \
-	APPNAME="$(APPNAME)"; \
 	fi; \
 	$(LINK_APP)
 
 link_o.aix:
 	@ $(CALC_VERSIONS); \
-	OBJECT_MODE=`expr x$(SHARED_LDFLAGS) : 'x\-[a-z]\([0-9]*\)'`; \
+	OBJECT_MODE=`expr "x$(SHARED_LDFLAGS)" : 'x\-[a-z]*\(64\)'` || :; \
 	OBJECT_MODE=$${OBJECT_MODE:-32}; export OBJECT_MODE; \
 	SHLIB=lib$(LIBNAME).so; \
 	SHLIB_SUFFIX=; \
-	LIBDEPS="$(LIBDEPS)"; \
-	ALLSYMSFLAGS='-bnogc'; \
+	ALLSYMSFLAGS=''; \
 	NOALLSYMSFLAGS=''; \
-	SHAREDFLAGS='$(CFLAGS) -G -bE:lib$(LIBNAME).exp -bM:SRE -blibpath:$(LIBRPATH)'; \
-	SHAREDCMD='$(CC)'; \
-	$(LINK_SO_O); rm -rf lib$(LIBNAME).exp
+	SHAREDFLAGS='$(CFLAGS) $(SHARED_LDFLAGS) -Wl,-bexpall,-bnolibpath,-bM:SRE'; \
+	$(LINK_SO_O);
 link_a.aix:
 	@ $(CALC_VERSIONS); \
-	OBJECT_MODE=`expr x$(SHARED_LDFLAGS) : 'x\-[a-z]\([0-9]*\)'`; \
+	OBJECT_MODE=`expr "x$(SHARED_LDFLAGS)" : 'x\-[a-z]*\(64\)'` || : ; \
 	OBJECT_MODE=$${OBJECT_MODE:-32}; export OBJECT_MODE; \
 	SHLIB=lib$(LIBNAME).so; \
 	SHLIB_SUFFIX=; \
-	LIBDEPS="$(LIBDEPS)"; \
 	ALLSYMSFLAGS='-bnogc'; \
 	NOALLSYMSFLAGS=''; \
-	SHAREDFLAGS='$(CFLAGS) -G -bE:lib$(LIBNAME).exp -bM:SRE -blibpath:$(LIBRPATH)'; \
-	SHAREDCMD='$(CC)'; \
+	SHAREDFLAGS='$(CFLAGS) $(SHARED_LDFLAGS) -Wl,-bexpall,-bnolibpath,-bM:SRE'; \
 	$(LINK_SO_A_VIA_O)
 link_app.aix:
-	LDCMD=$(CC);\
-	LDFLAGS="$(CFLAGS) -blibpath:$(LIBRPATH)"; \
-	LIBDEPS="$(LIBDEPS)"; \
-	APPNAME="$(APPNAME)"
+	LDFLAGS="$(CFLAGS) -Wl,-brtl,-blibpath:$(LIBRPATH):$${LIBPATH:-/usr/lib:/lib}"; \
 	$(LINK_APP)
 
 link_o.reliantunix:
 	@ $(CALC_VERSIONS); \
 	SHLIB=lib$(LIBNAME).so; \
 	SHLIB_SUFFIX=; \
-	LIBDEPS="$(LIBDEPS)"; \
 	ALLSYMSFLAGS=; \
 	NOALLSYMSFLAGS=''; \
 	SHAREDFLAGS='$(CFLAGS) -G'; \
-	SHAREDCMD='$(CC)'; \
 	$(LINK_SO_O)
 link_a.reliantunix:
 	@ $(CALC_VERSIONS); \
 	SHLIB=lib$(LIBNAME).so; \
 	SHLIB_SUFFIX=; \
-	LIBDEPS="$(LIBDEPS)"; \
 	ALLSYMSFLAGS=; \
 	NOALLSYMSFLAGS=''; \
 	SHAREDFLAGS='$(CFLAGS) -G'; \
-	SHAREDCMD='$(CC)'; \
 	$(LINK_SO_A_UNPACKED)
 link_app.reliantunix:
-	LDCMD=$(CC);\
-	LDFLAGS="$(CFLAGS)"; \
-	LIBDEPS="$(LIBDEPS)"; \
-	APPNAME="$(APPNAME)"
 	$(LINK_APP)
 
 # Targets to build symbolic links when needed
@@ -740,7 +549,7 @@ symlink.hpux:
 	expr $(PLATFORM) : '.*ia64' > /dev/null && SHLIB=lib$(LIBNAME).so; \
 	$(SYMLINK_SO)
 # The following lines means those specific architectures do no symlinks
-symlink.cygwin symlib.alpha-osf1 symlink.tru64 symlink.tru64-rpath:
+symlink.cygwin symlink.alpha-osf1 symlink.tru64 symlink.tru64-rpath:
 
 # Compatibility targets
 link_o.bsd-gcc-shared link_o.linux-shared link_o.gnu-shared: link_o.gnu

NEWS

@@ -5,6 +5,172 @@
   This file gives a brief overview of the major changes between each OpenSSL
   release. For more details please read the CHANGES file.
 
+  Major changes between OpenSSL 0.9.8k and OpenSSL 0.9.8l:
+
+      o Ban renegotiation.
+
+  Major changes between OpenSSL 0.9.8j and OpenSSL 0.9.8k:
+
+      o Fix various build issues.
+      o Fix security issues (CVE-2009-0590, CVE-2009-0591, CVE-2009-0789)
+
+  Major changes between OpenSSL 0.9.8i and OpenSSL 0.9.8j:
+
+      o Fix security issue (CVE-2008-5077)
+      o Merge FIPS 140-2 branch code.
+
+  Major changes between OpenSSL 0.9.8g and OpenSSL 0.9.8h:
+
+      o CryptoAPI ENGINE support.
+      o Various precautionary measures.
+      o Fix for bugs affecting certificate request creation.
+      o Support for local machine keyset attribute in PKCS#12 files.
+
+  Major changes between OpenSSL 0.9.8f and OpenSSL 0.9.8g:
+
+      o Backport of CMS functionality to 0.9.8.
+      o Fixes for bugs introduced with 0.9.8f.
+
+  Major changes between OpenSSL 0.9.8e and OpenSSL 0.9.8f:
+
+      o Add gcc 4.2 support.
+      o Add support for AES and SSE2 assembly lanugauge optimization
+        for VC++ build.
+      o Support for RFC4507bis and server name extensions if explicitly 
+        selected at compile time.
+      o DTLS improvements.
+      o RFC4507bis support.
+      o TLS Extensions support.
+
+  Major changes between OpenSSL 0.9.8d and OpenSSL 0.9.8e:
+
+      o Various ciphersuite selection fixes.
+      o RFC3779 support.
+
+  Major changes between OpenSSL 0.9.8c and OpenSSL 0.9.8d:
+
+      o Introduce limits to prevent malicious key DoS  (CVE-2006-2940)
+      o Fix security issues (CVE-2006-2937, CVE-2006-3737, CVE-2006-4343)
+      o Changes to ciphersuite selection algorithm
+
+  Major changes between OpenSSL 0.9.8b and OpenSSL 0.9.8c:
+
+      o Fix Daniel Bleichenbacher forged signature attack, CVE-2006-4339
+      o New cipher Camellia
+
+  Major changes between OpenSSL 0.9.8a and OpenSSL 0.9.8b:
+
+      o Cipher string fixes.
+      o Fixes for VC++ 2005.
+      o Updated ECC cipher suite support.
+      o New functions EVP_CIPHER_CTX_new() and EVP_CIPHER_CTX_free().
+      o Zlib compression usage fixes.
+      o Built in dynamic engine compilation support on Win32.
+      o Fixes auto dynamic engine loading in Win32.
+
+  Major changes between OpenSSL 0.9.8 and OpenSSL 0.9.8a:
+
+      o Fix potential SSL 2.0 rollback, CVE-2005-2969
+      o Extended Windows CE support
+
+  Major changes between OpenSSL 0.9.7g and OpenSSL 0.9.8:
+
+      o Major work on the BIGNUM library for higher efficiency and to
+        make operations more streamlined and less contradictory.  This
+        is the result of a major audit of the BIGNUM library.
+      o Addition of BIGNUM functions for fields GF(2^m) and NIST
+        curves, to support the Elliptic Crypto functions.
+      o Major work on Elliptic Crypto; ECDH and ECDSA added, including
+        the use through EVP, X509 and ENGINE.
+      o New ASN.1 mini-compiler that's usable through the OpenSSL
+        configuration file.
+      o Added support for ASN.1 indefinite length constructed encoding.
+      o New PKCS#12 'medium level' API to manipulate PKCS#12 files.
+      o Complete rework of shared library construction and linking
+        programs with shared or static libraries, through a separate
+        Makefile.shared.
+      o Rework of the passing of parameters from one Makefile to another.
+      o Changed ENGINE framework to load dynamic engine modules
+        automatically from specifically given directories.
+      o New structure and ASN.1 functions for CertificatePair.
+      o Changed the ZLIB compression method to be stateful.
+      o Changed the key-generation and primality testing "progress"
+        mechanism to take a structure that contains the ticker
+        function and an argument.
+      o New engine module: GMP (performs private key exponentiation).
+      o New engine module: VIA PadLOck ACE extension in VIA C3
+        Nehemiah processors.
+      o Added support for IPv6 addresses in certificate extensions.
+        See RFC 1884, section 2.2.
+      o Added support for certificate policy mappings, policy
+        constraints and name constraints.
+      o Added support for multi-valued AVAs in the OpenSSL
+        configuration file.
+      o Added support for multiple certificates with the same subject
+        in the 'openssl ca' index file.
+      o Make it possible to create self-signed certificates using
+        'openssl ca -selfsign'.
+      o Make it possible to generate a serial number file with
+        'openssl ca -create_serial'.
+      o New binary search functions with extended functionality.
+      o New BUF functions.
+      o New STORE structure and library to provide an interface to all
+        sorts of data repositories.  Supports storage of public and
+        private keys, certificates, CRLs, numbers and arbitrary blobs.
+	This library is unfortunately unfinished and unused withing
+	OpenSSL.
+      o New control functions for the error stack.
+      o Changed the PKCS#7 library to support one-pass S/MIME
+        processing.
+      o Added the possibility to compile without old deprecated
+        functionality with the OPENSSL_NO_DEPRECATED macro or the
+        'no-deprecated' argument to the config and Configure scripts.
+      o Constification of all ASN.1 conversion functions, and other
+        affected functions.
+      o Improved platform support for PowerPC.
+      o New FIPS 180-2 algorithms (SHA-224, -256, -384 and -512).
+      o New X509_VERIFY_PARAM structure to support parametrisation
+        of X.509 path validation.
+      o Major overhaul of RC4 performance on Intel P4, IA-64 and
+        AMD64.
+      o Changed the Configure script to have some algorithms disabled
+        by default.  Those can be explicitely enabled with the new
+        argument form 'enable-xxx'.
+      o Change the default digest in 'openssl' commands from MD5 to
+        SHA-1.
+      o Added support for DTLS.
+      o New BIGNUM blinding.
+      o Added support for the RSA-PSS encryption scheme
+      o Added support for the RSA X.931 padding.
+      o Added support for BSD sockets on NetWare.
+      o Added support for files larger than 2GB.
+      o Added initial support for Win64.
+      o Added alternate pkg-config files.
+
+  Major changes between OpenSSL 0.9.7k and OpenSSL 0.9.7l:
+
+      o Introduce limits to prevent malicious key DoS  (CVE-2006-2940)
+      o Fix security issues (CVE-2006-2937, CVE-2006-3737, CVE-2006-4343)
+
+  Major changes between OpenSSL 0.9.7j and OpenSSL 0.9.7k:
+
+      o Fix Daniel Bleichenbacher forged signature attack, CVE-2006-4339
+
+  Major changes between OpenSSL 0.9.7i and OpenSSL 0.9.7j:
+
+      o Visual C++ 2005 fixes.
+      o Update Windows build system for FIPS.
+
+  Major changes between OpenSSL 0.9.7h and OpenSSL 0.9.7i:
+
+      o Give EVP_MAX_MD_SIZE it's old value, except for a FIPS build.
+
+  Major changes between OpenSSL 0.9.7g and OpenSSL 0.9.7h:
+
+      o Fix SSL 2.0 Rollback, CVE-2005-2969
+      o Allow use of fixed-length exponent on DSA signing
+      o Default fixed-window RSA, DSA, DH private-key operations
+
   Major changes between OpenSSL 0.9.7f and OpenSSL 0.9.7g:
 
       o More compilation issues fixed.

Netware/build.bat

@@ -6,14 +6,16 @@ rem
 rem   usage:
 rem      build [target] [debug opts] [assembly opts] [configure opts]
 rem
-rem      target        - "netware-clib" - CLib NetWare build
-rem                    - "netware-libc" - LibC NKS NetWare build
+rem      target        - "netware-clib" - CLib NetWare build (WinSock Sockets)
+rem                    - "netware-clib-bsdsock" - CLib NetWare build (BSD Sockets)
+rem                    - "netware-libc" - LibC NetWare build (WinSock Sockets)
+rem                    - "netware-libc-bsdsock" - LibC NetWare build (BSD Sockets)
 rem 
 rem      debug opts    - "debug"  - build debug
 rem
 rem      assembly opts - "nw-mwasm" - use Metrowerks assembler
-rem      "nw-nasm"  - use NASM assembler
-rem      "no-asm"   - don't use assembly
+rem                    - "nw-nasm"  - use NASM assembler
+rem                    - "no-asm"   - don't use assembly
 rem
 rem      configure opts- all unrecognized arguments are passed to the
 rem                       perl configure script
@@ -70,12 +72,16 @@ if "%1" == "nw-nasm"  set NO_ASM=
 if "%1" == "nw-nasm"  set ARG_PROCESSED=YES
 if "%1" == "nw-mwasm" set ASM_MODE=nw-mwasm
 if "%1" == "nw-mwasm" set ASSEMBLER=Metrowerks
-if "%1" == "nw-mwasm"  set NO_ASM=
+if "%1" == "nw-mwasm" set NO_ASM=
 if "%1" == "nw-mwasm" set ARG_PROCESSED=YES
 if "%1" == "netware-clib" set BLD_TARGET=netware-clib
 if "%1" == "netware-clib" set ARG_PROCESSED=YES
+if "%1" == "netware-clib-bsdsock" set BLD_TARGET=netware-clib-bsdsock
+if "%1" == "netware-clib-bsdsock" set ARG_PROCESSED=YES
 if "%1" == "netware-libc" set BLD_TARGET=netware-libc
 if "%1" == "netware-libc" set ARG_PROCESSED=YES
+if "%1" == "netware-libc-bsdsock" set BLD_TARGET=netware-libc-bsdsock
+if "%1" == "netware-libc-bsdsock" set ARG_PROCESSED=YES
 
 rem   If we didn't recognize the argument, consider it an option for config
 if "%ARG_PROCESSED%" == "NO" set CONFIG_OPTS=%CONFIG_OPTS% %1
@@ -91,7 +97,9 @@ if "%BLD_TARGET%" == "no_target" goto no_target
 rem build the nlm make file name which includes target and debug info
 set NLM_MAKE=
 if "%BLD_TARGET%" == "netware-clib" set NLM_MAKE=netware\nlm_clib
+if "%BLD_TARGET%" == "netware-clib-bsdsock" set NLM_MAKE=netware\nlm_clib_bsdsock
 if "%BLD_TARGET%" == "netware-libc" set NLM_MAKE=netware\nlm_libc
+if "%BLD_TARGET%" == "netware-libc-bsdsock" set NLM_MAKE=netware\nlm_libc_bsdsock
 if "%DEBUG%" == "" set NLM_MAKE=%NLM_MAKE%.mak
 if "%DEBUG%" == "debug" set NLM_MAKE=%NLM_MAKE%_dbg.mak
 
@@ -106,7 +114,14 @@ echo Generating x86 for %ASSEMBLER% assembler
 
 echo Bignum
 cd crypto\bn\asm
-perl x86.pl %ASM_MODE% > bn-nw.asm
+rem perl x86.pl %ASM_MODE% > bn-nw.asm
+perl bn-586.pl %ASM_MODE% > bn-nw.asm
+perl co-586.pl %ASM_MODE% > co-nw.asm
+cd ..\..\..
+
+echo AES
+cd crypto\aes\asm
+perl aes-586.pl %ASM_MODE% > a-nw.asm
 cd ..\..\..
 
 echo DES
@@ -156,6 +171,11 @@ cd crypto\rc5\asm
 perl rc5-586.pl %ASM_MODE% > r5-nw.asm
 cd ..\..\..
 
+echo CPUID
+cd crypto
+perl x86cpuid.pl %ASM_MODE% > x86cpuid-nw.asm
+cd ..\
+
 rem ===============================================================
 rem
 :do_config
@@ -172,8 +192,10 @@ echo mk1mf.pl options: %DEBUG% %ASM_MODE% %CONFIG_OPTS% %BLD_TARGET%
 echo .
 perl util\mk1mf.pl %DEBUG% %ASM_MODE% %CONFIG_OPTS% %BLD_TARGET% >%NLM_MAKE%
 
+make -f %NLM_MAKE% vclean
+echo .
 echo The makefile "%NLM_MAKE%" has been created use your maketool to
-echo build (ex: gmake -f %NLM_MAKE%)
+echo build (ex: make -f %NLM_MAKE%)
 goto end
 
 rem ===============================================================
@@ -184,8 +206,10 @@ echo .  No build target specified!!!
 echo .
 echo .  usage: build [target] [debug opts] [assembly opts] [configure opts]
 echo .
-echo .     target        - "netware-clib" - CLib NetWare build
-echo .                   - "netware-libc" - LibC NKS NetWare build
+echo .     target        - "netware-clib" - CLib NetWare build (WinSock Sockets)
+echo .                   - "netware-clib-bsdsock" - CLib NetWare build (BSD Sockets)
+echo .                   - "netware-libc" - LibC NetWare build (WinSock Sockets)
+echo .                   - "netware-libc-bsdsock" - LibC NetWare build (BSD Sockets)
 echo .
 echo .     debug opts    - "debug"  - build debug
 echo .

Netware/cpy_tests.bat

@@ -73,6 +73,7 @@ copy %loc%\test\testsid.pem   %2\openssl\test\
 copy %loc%\test\testx509.pem  %2\openssl\test\
 copy %loc%\test\v3-cert1.pem  %2\openssl\test\
 copy %loc%\test\v3-cert2.pem  %2\openssl\test\
+copy %loc%\crypto\evp\evptests.txt %2\openssl\test\
 
 rem   copy the apps directory stuff
 copy %loc%\apps\client.pem    %2\openssl\apps\

Netware/do_tests.pl

@@ -34,16 +34,21 @@ sub main()
    # delete all the output files in the output directory
    unlink <$output_path\\*.*>;
 
-   # open the main log file 
+   # open the main log file
    open(OUT, ">$log_file") || die "unable to open $log_file\n";
 
-   
+   print( OUT "========================================================\n");
+   my $outFile = "$output_path\\version.out";
+   system("openssl2 version (CLIB_OPT)/>$outFile");
+   log_output("CHECKING FOR OPENSSL VERSION:", $outFile);
+
    algorithm_tests();
    encryption_tests();
+   evp_tests();
    pem_tests();
    verify_tests();
-   ssl_tests();
    ca_tests();
+   ssl_tests();
 
    close(OUT);
 
@@ -56,9 +61,10 @@ sub algorithm_tests
 {
    my $i;
    my $outFile;
-   my @tests = ( rsa_test, destest, ideatest, bftest, shatest, sha1test,
-                 md5test, dsatest, md2test, mdc2test, rc2test, rc4test, randtest,
-                 dhtest, exptest );
+   my @tests = ( rsa_test, destest, ideatest, bftest, bntest, shatest, sha1test,
+                 sha256t, sha512t, dsatest, md2test, md4test, md5test, mdc2test,
+                 rc2test, rc4test, rc5test, randtest, rmdtest, dhtest, ecdhtest,
+                 ecdsatest, ectest, exptest, casttest, hmactest );
 
    print( "\nRUNNING CRYPTO ALGORITHM TESTS:\n\n");
 
@@ -67,10 +73,17 @@ sub algorithm_tests
 
    foreach $i (@tests)
    {
-      $outFile = "$output_path\\$i.out";
-      system("$i > $outFile");
-      log_desc("Test: $i\.nlm:");
-      log_output("", $outFile );
+      if (-e "$base_path\\$i.nlm")
+      {
+         $outFile = "$output_path\\$i.out";
+         system("$i (CLIB_OPT)/>$outFile");
+         log_desc("Test: $i\.nlm:");
+         log_output("", $outFile );
+      }
+      else
+      {
+         log_desc("Test: $i\.nlm: file not found");
+      }
    }
 }
 
@@ -102,24 +115,24 @@ sub encryption_tests
 
       # do encryption
       $outFile = "$output_path\\enc.out";
-      system("openssl2 $i -e -bufsize 113 -k test -in $input -out $cipher > $outFile" );
+      system("openssl2 $i -e -bufsize 113 -k test -in $input -out $cipher (CLIB_OPT)/>$outFile" );
       log_output("Encrypting: $input --> $cipher", $outFile);
 
       # do decryption
       $outFile = "$output_path\\dec.out";
-      system("openssl2 $i -d -bufsize 157 -k test -in $cipher -out $clear > $outFile");
+      system("openssl2 $i -d -bufsize 157 -k test -in $cipher -out $clear (CLIB_OPT)/>$outFile");
       log_output("Decrypting: $cipher --> $clear", $outFile);
 
       # compare files
       $x = compare_files( $input, $clear, 1);
       if ( $x == 0 )
       {
-         print( "SUCCESS - files match: $input, $clear\n");
+         print( "\rSUCCESS - files match: $input, $clear\n");
          print( OUT "SUCCESS - files match: $input, $clear\n");
       }
       else
       {
-         print( "ERROR: files don't match\n");
+         print( "\rERROR: files don't match\n");
          print( OUT "ERROR: files don't match\n");
       }
 
@@ -129,24 +142,24 @@ sub encryption_tests
 
       # do encryption B64
       $outFile = "$output_path\\B64enc.out";
-      system("openssl2 $i -a -e -bufsize 113 -k test -in $input -out $cipher > $outFile");
+      system("openssl2 $i -a -e -bufsize 113 -k test -in $input -out $cipher (CLIB_OPT)/>$outFile");
       log_output("Encrypting(B64): $cipher --> $clear", $outFile);
 
       # do decryption B64
       $outFile = "$output_path\\B64dec.out";
-      system("openssl2 $i -a -d -bufsize 157 -k test -in $cipher -out $clear > $outFile");
+      system("openssl2 $i -a -d -bufsize 157 -k test -in $cipher -out $clear (CLIB_OPT)/>$outFile");
       log_output("Decrypting(B64): $cipher --> $clear", $outFile);
 
       # compare files
       $x = compare_files( $input, $clear, 1);
       if ( $x == 0 )
       {
-         print( "SUCCESS - files match: $input, $clear\n");
+         print( "\rSUCCESS - files match: $input, $clear\n");
          print( OUT "SUCCESS - files match: $input, $clear\n");
       }
       else
       {
-         print( "ERROR: files don't match\n");
+         print( "\rERROR: files don't match\n");
          print( OUT "ERROR: files don't match\n");
       }
 
@@ -192,24 +205,24 @@ sub pem_tests
 
       if ($i ne "req" )
       {
-         system("openssl2 $i -in $input -out $tmp_out > $outFile");
+         system("openssl2 $i -in $input -out $tmp_out (CLIB_OPT)/>$outFile");
          log_output( "openssl2 $i -in $input -out $tmp_out", $outFile);
       }
       else
       {
-         system("openssl2 $i -in $input -out $tmp_out -config $OpenSSL_config > $outFile");
+         system("openssl2 $i -in $input -out $tmp_out -config $OpenSSL_config (CLIB_OPT)/>$outFile");
          log_output( "openssl2 $i -in $input -out $tmp_out -config $OpenSSL_config", $outFile );
       }
 
       $x = compare_files( $input, $tmp_out);
       if ( $x == 0 )
       {
-         print( "SUCCESS - files match: $input, $tmp_out\n");
+         print( "\rSUCCESS - files match: $input, $tmp_out\n");
          print( OUT "SUCCESS - files match: $input, $tmp_out\n");
       }
       else
       {
-         print( "ERROR: files don't match\n");
+         print( "\rERROR: files don't match\n");
          print( OUT "ERROR: files don't match\n");
       }
       do_wait();
@@ -224,7 +237,8 @@ sub verify_tests
    my $i;
    my $outFile = "$output_path\\verify.out";
 
-   my @cert_files = <$cert_path\\*.pem>;
+   $cert_path =~ s/\\/\//g;
+   my @cert_files = <$cert_path/*.pem>;
 
    print( "\nRUNNING VERIFY TESTS:\n\n");
 
@@ -235,7 +249,7 @@ sub verify_tests
 
    foreach $i (@cert_files)
    {
-      system("openssl2 verify -CAfile $tmp_cert $i >$outFile");
+      system("openssl2 verify -CAfile $tmp_cert $i (CLIB_OPT)/>$outFile");
       log_desc("Verifying cert: $i");
       log_output("openssl2 verify -CAfile $tmp_cert $i", $outFile);
    }
@@ -246,113 +260,115 @@ sub verify_tests
 sub ssl_tests
 {
    my $outFile = "$output_path\\ssl_tst.out";
+   my($CAcert) = "$output_path\\certCA.ss";
+   my($Ukey)   = "$output_path\\keyU.ss";
+   my($Ucert)  = "$output_path\\certU.ss";
+   my($ssltest)= "ssltest -key $Ukey -cert $Ucert -c_key $Ukey -c_cert $Ucert -CAfile $CAcert";
 
    print( "\nRUNNING SSL TESTS:\n\n");
 
    print( OUT "\n========================================================\n");
    print( OUT "SSL TESTS:\n\n");
 
-   make_tmp_cert_file();
-
-   system("ssltest -ssl2 >$outFile");
+   system("ssltest -ssl2 (CLIB_OPT)/>$outFile");
    log_desc("Testing sslv2:");
    log_output("ssltest -ssl2", $outFile);
 
-   system("ssltest -ssl2 -server_auth -CAfile $tmp_cert >$outFile");
+   system("$ssltest -ssl2 -server_auth (CLIB_OPT)/>$outFile");
    log_desc("Testing sslv2 with server authentication:");
-   log_output("ssltest -ssl2 -server_auth -CAfile $tmp_cert", $outFile);
+   log_output("$ssltest -ssl2 -server_auth", $outFile);
 
-   system("ssltest -ssl2 -client_auth -CAfile $tmp_cert >$outFile");
+   system("$ssltest -ssl2 -client_auth (CLIB_OPT)/>$outFile");
    log_desc("Testing sslv2 with client authentication:");
-   log_output("ssltest -ssl2 -client_auth -CAfile $tmp_cert", $outFile);
+   log_output("$ssltest -ssl2 -client_auth", $outFile);
 
-   system("ssltest -ssl2 -server_auth -client_auth -CAfile $tmp_cert >$outFile");
+   system("$ssltest -ssl2 -server_auth -client_auth (CLIB_OPT)/>$outFile");
    log_desc("Testing sslv2 with both client and server authentication:");
-   log_output("ssltest -ssl2 -server_auth -client_auth -CAfile $tmp_cert", $outFile);
+   log_output("$ssltest -ssl2 -server_auth -client_auth", $outFile);
 
-   system("ssltest -ssl3 >$outFile");
+   system("ssltest -ssl3 (CLIB_OPT)/>$outFile");
    log_desc("Testing sslv3:");
    log_output("ssltest -ssl3", $outFile);
 
-   system("ssltest -ssl3 -server_auth -CAfile $tmp_cert >$outFile");
+   system("$ssltest -ssl3 -server_auth (CLIB_OPT)/>$outFile");
    log_desc("Testing sslv3 with server authentication:");
-   log_output("ssltest -ssl3 -server_auth -CAfile $tmp_cert", $outFile);
+   log_output("$ssltest -ssl3 -server_auth", $outFile);
 
-   system("ssltest -ssl3 -client_auth -CAfile $tmp_cert >$outFile");
+   system("$ssltest -ssl3 -client_auth (CLIB_OPT)/>$outFile");
    log_desc("Testing sslv3 with client authentication:");
-   log_output("ssltest -ssl3 -client_auth -CAfile $tmp_cert", $outFile);
+   log_output("$ssltest -ssl3 -client_auth", $outFile);
 
-   system("ssltest -ssl3 -server_auth -client_auth -CAfile $tmp_cert >$outFile");
+   system("$ssltest -ssl3 -server_auth -client_auth (CLIB_OPT)/>$outFile");
    log_desc("Testing sslv3 with both client and server authentication:");
-   log_output("ssltest -ssl3 -server_auth -client_auth -CAfile $tmp_cert", $outFile);
+   log_output("$ssltest -ssl3 -server_auth -client_auth", $outFile);
 
-   system("ssltest >$outFile");
+   system("ssltest (CLIB_OPT)/>$outFile");
    log_desc("Testing sslv2/sslv3:");
    log_output("ssltest", $outFile);
 
-   system("ssltest -server_auth -CAfile $tmp_cert >$outFile");
+   system("$ssltest -server_auth (CLIB_OPT)/>$outFile");
    log_desc("Testing sslv2/sslv3 with server authentication:");
-   log_output("ssltest -server_auth -CAfile $tmp_cert", $outFile);
+   log_output("$ssltest -server_auth", $outFile);
 
-   system("ssltest -client_auth -CAfile $tmp_cert >$outFile");
+   system("$ssltest -client_auth (CLIB_OPT)/>$outFile");
    log_desc("Testing sslv2/sslv3 with client authentication:");
-   log_output("ssltest -client_auth -CAfile $tmp_cert", $outFile);
+   log_output("$ssltest -client_auth ", $outFile);
 
-   system("ssltest -server_auth -client_auth -CAfile $tmp_cert >$outFile");
+   system("$ssltest -server_auth -client_auth (CLIB_OPT)/>$outFile");
    log_desc("Testing sslv2/sslv3 with both client and server authentication:");
-   log_output("ssltest -server_auth -client_auth -CAfile $tmp_cert", $outFile);
+   log_output("$ssltest -server_auth -client_auth", $outFile);
 
-   system("ssltest -bio_pair -ssl2 >$outFile");
+   system("ssltest -bio_pair -ssl2 (CLIB_OPT)/>$outFile");
    log_desc("Testing sslv2 via BIO pair:");
    log_output("ssltest -bio_pair -ssl2", $outFile);
 
-   system("ssltest -bio_pair -dhe1024dsa -v >$outFile");
+   system("ssltest -bio_pair -dhe1024dsa -v (CLIB_OPT)/>$outFile");
    log_desc("Testing sslv2/sslv3 with 1024 bit DHE via BIO pair:");
    log_output("ssltest -bio_pair -dhe1024dsa -v", $outFile);
 
-   system("ssltest -bio_pair -ssl2 -server_auth -CAfile $tmp_cert >$outFile");
+   system("$ssltest -bio_pair -ssl2 -server_auth (CLIB_OPT)/>$outFile");
    log_desc("Testing sslv2 with server authentication via BIO pair:");
-   log_output("ssltest -bio_pair -ssl2 -server_auth -CAfile $tmp_cert", $outFile);
+   log_output("$ssltest -bio_pair -ssl2 -server_auth", $outFile);
 
-   system("ssltest -bio_pair -ssl2 -client_auth -CAfile $tmp_cert >$outFile");
+   system("$ssltest -bio_pair -ssl2 -client_auth (CLIB_OPT)/>$outFile");
    log_desc("Testing sslv2 with client authentication via BIO pair:");
-   log_output("ssltest -bio_pair -ssl2 -client_auth -CAfile $tmp_cert", $outFile);
+   log_output("$ssltest -bio_pair -ssl2 -client_auth", $outFile);
 
-   system("ssltest -bio_pair -ssl2 -server_auth -client_auth -CAfile $tmp_cert >$outFile");
+   system("$ssltest -bio_pair -ssl2 -server_auth -client_auth (CLIB_OPT)/>$outFile");
    log_desc("Testing sslv2 with both client and server authentication via BIO pair:");
-   log_output("ssltest -bio_pair -ssl2 -server_auth -client_auth -CAfile $tmp_cert", $outFile);
+   log_output("$ssltest -bio_pair -ssl2 -server_auth -client_auth", $outFile);
 
-   system("ssltest -bio_pair -ssl3 >$outFile");
+   system("ssltest -bio_pair -ssl3 (CLIB_OPT)/>$outFile");
    log_desc("Testing sslv3 via BIO pair:");
    log_output("ssltest -bio_pair -ssl3", $outFile);
 
-   system("ssltest -bio_pair -ssl3 -server_auth -CAfile $tmp_cert >$outFile");
+   system("$ssltest -bio_pair -ssl3 -server_auth (CLIB_OPT)/>$outFile");
    log_desc("Testing sslv3 with server authentication via BIO pair:");
-   log_output("ssltest -bio_pair -ssl3 -server_auth -CAfile $tmp_cert", $outFile);
+   log_output("$ssltest -bio_pair -ssl3 -server_auth", $outFile);
 
-   system("ssltest -bio_pair -ssl3 -client_auth -CAfile $tmp_cert >$outFile");
+   system("$ssltest -bio_pair -ssl3 -client_auth (CLIB_OPT)/>$outFile");
    log_desc("Testing sslv3 with client authentication  via BIO pair:");
-   log_output("ssltest -bio_pair -ssl3 -client_auth -CAfile $tmp_cert", $outFile);
+   log_output("$ssltest -bio_pair -ssl3 -client_auth", $outFile);
 
-   system("ssltest -bio_pair -ssl3 -server_auth -client_auth -CAfile $tmp_cert >$outFile");
+   system("$ssltest -bio_pair -ssl3 -server_auth -client_auth (CLIB_OPT)/>$outFile");
    log_desc("Testing sslv3 with both client and server authentication via BIO pair:");
-   log_output("ssltest -bio_pair -ssl3 -server_auth -client_auth -CAfile $tmp_cert", $outFile);
+   log_output("$ssltest -bio_pair -ssl3 -server_auth -client_auth", $outFile);
 
-   system("ssltest -bio_pair >$outFile");
+   system("ssltest -bio_pair (CLIB_OPT)/>$outFile");
    log_desc("Testing sslv2/sslv3 via BIO pair:");
    log_output("ssltest -bio_pair", $outFile);
 
-   system("ssltest -bio_pair -server_auth -CAfile $tmp_cert >$outFile");
+   system("$ssltest -bio_pair -server_auth (CLIB_OPT)/>$outFile");
    log_desc("Testing sslv2/sslv3 with server authentication via BIO pair:");
-   log_output("ssltest -bio_pair -server_auth -CAfile $tmp_cert", $outFile);
+   log_output("$ssltest -bio_pair -server_auth", $outFile);
 
-   system("ssltest -bio_pair -client_auth -CAfile $tmp_cert >$outFile");
+   system("$ssltest -bio_pair -client_auth (CLIB_OPT)/>$outFile");
    log_desc("Testing sslv2/sslv3 with client authentication via BIO pair:");
-   log_output("ssltest -bio_pair -client_auth -CAfile $tmp_cert", $outFile);
+   log_output("$ssltest -bio_pair -client_auth", $outFile);
 
-   system("ssltest -bio_pair -server_auth -client_auth -CAfile $tmp_cert >$outFile");
+   system("$ssltest -bio_pair -server_auth -client_auth (CLIB_OPT)/>$outFile");
    log_desc("Testing sslv2/sslv3 with both client and server authentication via BIO pair:");
-   log_output("ssltest -bio_pair -server_auth -client_auth -CAfile $tmp_cert", $outFile);
+   log_output("$ssltest -bio_pair -server_auth -client_auth", $outFile);
 }
 
 
@@ -380,43 +396,43 @@ sub ca_tests
    print( OUT "\n========================================================\n");
    print( OUT "CA TESTS:\n");
 
-   system("openssl2 req -config $CAconf -out $CAreq -keyout $CAkey -new >$outFile");
+   system("openssl2 req -config $CAconf -out $CAreq -keyout $CAkey -new (CLIB_OPT)/>$outFile");
    log_desc("Make a certificate request using req:");
    log_output("openssl2 req -config $CAconf -out $CAreq -keyout $CAkey -new", $outFile);
 
-   system("openssl2 x509 -CAcreateserial -in $CAreq -days 30 -req -out $CAcert -signkey $CAkey >$outFile");
+   system("openssl2 x509 -CAcreateserial -in $CAreq -days 30 -req -out $CAcert -signkey $CAkey (CLIB_OPT)/>$outFile");
    log_desc("Convert the certificate request into a self signed certificate using x509:");
    log_output("openssl2 x509 -CAcreateserial -in $CAreq -days 30 -req -out $CAcert -signkey $CAkey", $outFile);
 
-   system("openssl2 x509 -in $CAcert -x509toreq -signkey $CAkey -out $CAreq2 >$outFile");
+   system("openssl2 x509 -in $CAcert -x509toreq -signkey $CAkey -out $CAreq2 (CLIB_OPT)/>$outFile");
    log_desc("Convert a certificate into a certificate request using 'x509':");
    log_output("openssl2 x509 -in $CAcert -x509toreq -signkey $CAkey -out $CAreq2", $outFile);
 
-   system("openssl2 req -config $OpenSSL_config -verify -in $CAreq -noout >$outFile");
+   system("openssl2 req -config $OpenSSL_config -verify -in $CAreq -noout (CLIB_OPT)/>$outFile");
    log_output("openssl2 req -config $OpenSSL_config -verify -in $CAreq -noout", $outFile);
 
-   system("openssl2 req -config $OpenSSL_config -verify -in $CAreq2 -noout >$outFile");
+   system("openssl2 req -config $OpenSSL_config -verify -in $CAreq2 -noout (CLIB_OPT)/>$outFile");
    log_output( "openssl2 req -config $OpenSSL_config -verify -in $CAreq2 -noout", $outFile);
 
-   system("openssl2 verify -CAfile $CAcert $CAcert >$outFile");
+   system("openssl2 verify -CAfile $CAcert $CAcert (CLIB_OPT)/>$outFile");
    log_output("openssl2 verify -CAfile $CAcert $CAcert", $outFile);
 
-   system("openssl2 req -config $Uconf -out $Ureq -keyout $Ukey -new >$outFile");
+   system("openssl2 req -config $Uconf -out $Ureq -keyout $Ukey -new (CLIB_OPT)/>$outFile");
    log_desc("Make another certificate request using req:");
    log_output("openssl2 req -config $Uconf -out $Ureq -keyout $Ukey -new", $outFile);
 
-   system("openssl2 x509 -CAcreateserial -in $Ureq -days 30 -req -out $Ucert -CA $CAcert -CAkey $CAkey -CAserial $CAserial >$outFile");
+   system("openssl2 x509 -CAcreateserial -in $Ureq -days 30 -req -out $Ucert -CA $CAcert -CAkey $CAkey -CAserial $CAserial (CLIB_OPT)/>$outFile");
    log_desc("Sign certificate request with the just created CA via x509:");
    log_output("openssl2 x509 -CAcreateserial -in $Ureq -days 30 -req -out $Ucert -CA $CAcert -CAkey $CAkey -CAserial $CAserial", $outFile);
 
-   system("openssl2 verify -CAfile $CAcert $Ucert >$outFile");
+   system("openssl2 verify -CAfile $CAcert $Ucert (CLIB_OPT)/>$outFile");
    log_output("openssl2 verify -CAfile $CAcert $Ucert", $outFile);
 
-   system("openssl2 x509 -subject -issuer -startdate -enddate -noout -in $Ucert >$outFile");
+   system("openssl2 x509 -subject -issuer -startdate -enddate -noout -in $Ucert (CLIB_OPT)/>$outFile");
    log_desc("Certificate details");
    log_output("openssl2 x509 -subject -issuer -startdate -enddate -noout -in $Ucert", $outFile);
 
-   print(OUT "-- \n");
+   print(OUT "--\n");
    print(OUT "The generated CA certificate is $CAcert\n");
    print(OUT "The generated CA private key is $CAkey\n");
    print(OUT "The current CA signing serial number is in $CAserial\n");
@@ -426,6 +442,29 @@ sub ca_tests
    print(OUT "--\n");
 }
 
+############################################################################
+sub evp_tests
+{
+   my $i = 'evp_test';
+
+   print( "\nRUNNING EVP TESTS:\n\n");
+
+   print( OUT "\n========================================================\n");
+   print( OUT "EVP TESTS:\n\n");
+
+   if (-e "$base_path\\$i.nlm")
+   {
+       my $outFile = "$output_path\\$i.out";
+       system("$i $test_path\\evptests.txt (CLIB_OPT)/>$outFile");
+       log_desc("Test: $i\.nlm:");
+       log_output("", $outFile );
+   }
+   else
+   {
+       log_desc("Test: $i\.nlm: file not found");
+   }
+}
+
 ############################################################################
 sub log_output( $ $ )
 {
@@ -436,7 +475,7 @@ sub log_output( $ $ )
 
    if ($desc)
    {
-      print("$desc\n");
+      print("\r$desc\n");
       print(OUT "$desc\n");
    }
 
@@ -448,8 +487,8 @@ sub log_output( $ $ )
       # copy test output to log file
    open(IN, "<$file");
    while (<IN>)
-   { 
-      print(OUT $_); 
+   {
+      print(OUT $_);
       if ( $_ =~ /ERROR/ )
       {
          $error = 1;
@@ -476,13 +515,13 @@ sub log_output( $ $ )
       $key = getc;
       print("\n");
    }
-      
-      # Several of the testing scripts run a loop loading the 
+
+      # Several of the testing scripts run a loop loading the
       # same NLM with different options.
-      # On slow NetWare machines there appears to be some delay in the 
+      # On slow NetWare machines there appears to be some delay in the
       # OS actually unloading the test nlms and the OS complains about.
-      # the NLM already being loaded.  This additional pause is to 
-      # to help provide a little more time for unloading before trying to 
+      # the NLM already being loaded.  This additional pause is to
+      # to help provide a little more time for unloading before trying to
       # load again.
    sleep(1);
 }
@@ -553,7 +592,7 @@ sub do_wait()
 ############################################################################
 sub make_tmp_cert_file()
 {
-   my @cert_files = <$cert_path\\*.pem>;
+   my @cert_files = <$cert_path/*.pem>;
 
       # delete the file if it already exists
    unlink($tmp_cert);
@@ -561,7 +600,7 @@ sub make_tmp_cert_file()
    open( TMP_CERT, ">$tmp_cert") || die "\nunable to open $tmp_cert\n";
 
    print("building temporary cert file\n");
-   
+
    # create a temporary cert file that contains all the certs
    foreach $i (@cert_files)
    {

Netware/set_env.bat

@@ -16,75 +16,97 @@ if "a%1" == "a" goto usage
                
 set LIBC_BUILD=
 set CLIB_BUILD=
+set GNUC=
 
 if "%1" == "netware-clib" set CLIB_BUILD=Y
 if "%1" == "netware-clib" set LIBC_BUILD=
 
-if "%1" == "netware-libc"  set LIBC_BUILD=Y
-if "%1" == "netware-libc"  set CLIB_BUILD=
+if "%1" == "netware-libc" set LIBC_BUILD=Y
+if "%1" == "netware-libc" set CLIB_BUILD=
+
+if "%2" == "gnuc" set GNUC=Y
+if "%2" == "codewarrior" set GNUC=
 
 rem   Location of tools (compiler, linker, etc)
-set TOOLS=d:\i_drive\tools
+if "%NDKBASE%" == "" set NDKBASE=c:\Novell
 
 rem   If Perl for Win32 is not already in your path, add it here
 set PERL_PATH=
 
 rem   Define path to the Metrowerks command line tools
+rem   or GNU Crosscompiler gcc / nlmconv
 rem   ( compiler, assembler, linker)
-set METROWERKS_PATH=%TOOLS%\codewar\pdk_21\tools\command line tools
-rem set METROWERKS_PATH=%TOOLS%\codewar\PDK_40\Other Metrowerks Tools\Command Line Tools
+if "%GNUC%" == "Y" set COMPILER_PATH=c:\usr\i586-netware\bin;c:\usr\bin
+if "%GNUC%" == "" set COMPILER_PATH=c:\prg\cwcmdl40
 
 rem   If using gnu make define path to utility
-set GNU_MAKE_PATH=%TOOLS%\gnu
+rem set GNU_MAKE_PATH=%NDKBASE%\gnu
+set GNU_MAKE_PATH=c:\prg\tools
 
 rem   If using ms nmake define path to nmake
-set MS_NMAKE_PATH=%TOOLS%\msvc\600\bin
+rem set MS_NMAKE_PATH=%NDKBASE%\msvc\600\bin
 
 rem   If using NASM assembler define path
-set NASM_PATH=%TOOLS%\nasm
+rem set NASM_PATH=%NDKBASE%\nasm
+set NASM_PATH=c:\prg\tools
 
 rem   Update path to include tool paths
-set path=%path%;%METROWERKS_PATH%
+set path=%path%;%COMPILER_PATH%
 if not "%GNU_MAKE_PATH%" == "" set path=%path%;%GNU_MAKE_PATH%
 if not "%MS_NMAKE_PATH%" == "" set path=%path%;%MS_NMAKE_PATH%
 if not "%NASM_PATH%"     == "" set path=%path%;%NASM_PATH%
 if not "%PERL_PATH%"     == "" set path=%path%;%PERL_PATH%
 
-rem   Set MWCIncludes to location of Novell NDK includes
-if "%LIBC_BUILD%" == "Y" set MWCIncludes=%TOOLS%\ndk\libc\include;%TOOLS%\ndk\libc\include\winsock;.\engines
-if "%CLIB_BUILD%" == "Y" set MWCIncludes=%TOOLS%\ndk\nwsdk\include\nlm;.\engines
-set include=
+rem   Set INCLUDES to location of Novell NDK includes
+if "%LIBC_BUILD%" == "Y" set INCLUDE=%NDKBASE%\ndk\libc\include;%NDKBASE%\ndk\libc\include\winsock
+if "%CLIB_BUILD%" == "Y" set INCLUDE=%NDKBASE%\ndk\nwsdk\include\nlm;%NDKBASE%\ws295sdk\include
 
 rem   Set Imports to location of Novell NDK import files
-if "%LIBC_BUILD%" == "Y" set IMPORTS=%TOOLS%\ndk\libc\imports
-if "%CLIB_BUILD%" == "Y" set IMPORTS=%TOOLS%\ndk\nwsdk\imports
+if "%LIBC_BUILD%" == "Y" set IMPORTS=%NDKBASE%\ndk\libc\imports
+if "%CLIB_BUILD%" == "Y" set IMPORTS=%NDKBASE%\ndk\nwsdk\imports
 
 rem   Set PRELUDE to the absolute path of the prelude object to link with in
 rem   the Metrowerks NetWare PDK - NOTE: for Clib builds "clibpre.o" is 
 rem   recommended, for LibC NKS builds libcpre.o must be used
+if "%GNUC%" == "Y" goto gnuc
 if "%LIBC_BUILD%" == "Y" set PRELUDE=%IMPORTS%\libcpre.o
-if "%CLIB_BUILD%" == "Y" set PRELUDE=%IMPORTS%\clibpre.o
+rem if "%CLIB_BUILD%" == "Y" set PRELUDE=%IMPORTS%\clibpre.o
+if "%CLIB_BUILD%" == "Y" set PRELUDE=%IMPORTS%\prelude.o
+echo using MetroWerks CodeWarrior 
+goto info
 
+:gnuc
+if "%LIBC_BUILD%" == "Y" set PRELUDE=%IMPORTS%\libcpre.gcc.o
+rem if "%CLIB_BUILD%" == "Y" set PRELUDE=%IMPORTS%\clibpre.gcc.o
+if "%CLIB_BUILD%" == "Y" set PRELUDE=%IMPORTS%\prelude.gcc.o
+echo using GNU GCC Compiler 
+
+:info
+echo.
 
 if "%LIBC_BUILD%" == "Y" echo Enviroment configured for LibC build
 if "%LIBC_BUILD%" == "Y" echo use "netware\build.bat netware-libc ..." 
 
 if "%CLIB_BUILD%" == "Y" echo Enviroment configured for CLib build
 if "%CLIB_BUILD%" == "Y" echo use "netware\build.bat netware-clib ..." 
+
 goto end
 
 :usage
 rem ===============================================================
-echo .
-echo . No target build specified!
-echo .
-echo . usage: set_env [target]
-echo .
-echo .   target      - "netware-clib" - Clib build
-echo .               - "netware-libc" - LibC build
-echo .
-
-
+echo.
+echo No target build specified!
+echo.
+echo usage: set_env [target] [compiler]
+echo.
+echo target      - "netware-clib" - Clib build
+echo             - "netware-libc" - LibC build
+echo.
+echo compiler    - "gnuc"         - GNU GCC Compiler
+echo             - "codewarrior"  - MetroWerks CodeWarrior (default)
+echo.
 
 :end
+echo.
+
 

PROBLEMS

@@ -12,8 +12,8 @@ along the whole library path before it bothers looking for .a libraries.  This
 means that -L switches won't matter unless OpenSSL is built with shared
 library support.
 
-The workaround may be to change the following lines in apps/Makefile.ssl and
-test/Makefile.ssl:
+The workaround may be to change the following lines in apps/Makefile and
+test/Makefile:
 
   LIBCRYPTO=-L.. -lcrypto
   LIBSSL=-L.. -lssl
@@ -48,20 +48,34 @@ will interfere with each other and lead to test failure.
 The solution is simple for now: don't run parallell make when testing.
 
 
-* Bugs in gcc 3.0 triggered
+* Bugs in gcc triggered
 
-According to a problem report, there are bugs in gcc 3.0 that are
-triggered by some of the code in OpenSSL, more specifically in
-PEM_get_EVP_CIPHER_INFO().  The triggering code is the following:
+- According to a problem report, there are bugs in gcc 3.0 that are
+  triggered by some of the code in OpenSSL, more specifically in
+  PEM_get_EVP_CIPHER_INFO().  The triggering code is the following:
 
 	header+=11;
 	if (*header != '4') return(0); header++;
 	if (*header != ',') return(0); header++;
 
-What happens is that gcc might optimize a little too agressively, and
-you end up with an extra incrementation when *header != '4'.
+  What happens is that gcc might optimize a little too agressively, and
+  you end up with an extra incrementation when *header != '4'.
 
-We recommend that you upgrade gcc to as high a 3.x version as you can.
+  We recommend that you upgrade gcc to as high a 3.x version as you can.
+
+- According to multiple problem reports, some of our message digest
+  implementations trigger bug[s] in code optimizer in gcc 3.3 for sparc64
+  and gcc 2.96 for ppc. Former fails to complete RIPEMD160 test, while
+  latter - SHA one.
+
+  The recomendation is to upgrade your compiler. This naturally applies to
+  other similar cases.
+
+- There is a subtle Solaris x86-specific gcc run-time environment bug, which
+  "falls between" OpenSSL [0.9.8 and later], Solaris ld and GCC. The bug
+  manifests itself as Segmentation Fault upon early application start-up.
+  The problem can be worked around by patching the environment according to
+  http://www.openssl.org/~appro/values.c.
 
 * solaris64-sparcv9-cc SHA-1 performance with WorkShop 6 compiler.
 
@@ -120,3 +134,64 @@ Any information helping to solve this issue would be deeply
 appreciated.
 
 NOTE: building non-shared doesn't come with this problem.
+
+* ULTRIX build fails with shell errors, such as "bad substitution"
+  and "test: argument expected"
+
+The problem is caused by ULTRIX /bin/sh supporting only original
+Bourne shell syntax/semantics, and the trouble is that the vast
+majority is so accustomed to more modern syntax, that very few
+people [if any] would recognize the ancient syntax even as valid.
+This inevitably results in non-trivial scripts breaking on ULTRIX,
+and OpenSSL isn't an exclusion. Fortunately there is workaround,
+hire /bin/ksh to do the job /bin/sh fails to do.
+
+1. Trick make(1) to use /bin/ksh by setting up following environ-
+   ment variables *prior* you execute ./Configure and make:
+
+	PROG_ENV=POSIX
+	MAKESHELL=/bin/ksh
+	export PROG_ENV MAKESHELL
+
+   or if your shell is csh-compatible:
+
+	setenv PROG_ENV POSIX
+	setenv MAKESHELL /bin/ksh
+
+2. Trick /bin/sh to use alternative expression evaluator. Create
+   following 'test' script for example in /tmp:
+
+	#!/bin/ksh
+	${0##*/} "$@"
+
+   Then 'chmod a+x /tmp/test; ln /tmp/test /tmp/[' and *prepend*
+   your $PATH with chosen location, e.g. PATH=/tmp:$PATH. Alter-
+   natively just replace system /bin/test and /bin/[ with the
+   above script.
+
+* hpux64-ia64-cc fails blowfish test.
+
+Compiler bug, presumably at particular patch level. It should be noted
+that same compiler generates correct 32-bit code, a.k.a. hpux-ia64-cc
+target. Drop optimization level to +O2 when compiling 64-bit bf_skey.o.
+
+* no-engines generates errors.
+
+Unfortunately, the 'no-engines' configuration option currently doesn't
+work properly.  Use 'no-hw' and you'll will at least get no hardware
+support.  We'll see how we fix that on OpenSSL versions past 0.9.8.
+
+* 'make test' fails in BN_sqr [commonly with "error 139" denoting SIGSEGV]
+  if elder GNU binutils were deployed to link shared libcrypto.so.
+
+As subject suggests the failure is caused by a bug in elder binutils,
+either as or ld, and was observed on FreeBSD and Linux. There are two
+options. First is naturally to upgrade binutils, the second one - to
+reconfigure with additional no-sse2 [or 386] option passed to ./config.
+
+* If configured with ./config no-dso, toolkit still gets linked with -ldl,
+  which most notably poses a problem when linking with dietlibc.
+
+We don't have framework to associate -ldl with no-dso, therefore the only
+way is to edit Makefile right after ./config no-dso and remove -ldl from
+EX_LIBS line.

README

@@ -1,7 +1,7 @@
 
- OpenSSL 0.9.8-dev XX xxx XXXX
+ OpenSSL 0.9.8l
 
- Copyright (c) 1998-2005 The OpenSSL Project
+ Copyright (c) 1998-2008 The OpenSSL Project
  Copyright (c) 1995-1998 Eric A. Young, Tim J. Hudson
  All rights reserved.
 
@@ -36,12 +36,13 @@
      actually logically part of it. It includes routines for the following:
 
      Ciphers
-        libdes - EAY's libdes DES encryption package which has been floating
-                 around the net for a few years.  It includes 15
-                 'modes/variations' of DES (1, 2 and 3 key versions of ecb,
-                 cbc, cfb and ofb; pcbc and a more general form of cfb and
-                 ofb) including desx in cbc mode, a fast crypt(3), and
-                 routines to read passwords from the keyboard.
+        libdes - EAY's libdes DES encryption package which was floating
+                 around the net for a few years, and was then relicensed by
+                 him as part of SSLeay.  It includes 15 'modes/variations'
+                 of DES (1, 2 and 3 key versions of ecb, cbc, cfb and ofb;
+                 pcbc and a more general form of cfb and ofb) including desx
+                 in cbc mode, a fast crypt(3), and routines to read
+                 passwords from the keyboard.
         RC4 encryption,
         RC2 encryption      - 4 different modes, ecb, cbc, cfb and ofb.
         Blowfish encryption - 4 different modes, ecb, cbc, cfb and ofb.
@@ -113,6 +114,10 @@
 
  The MDC2 algorithm is patented by IBM.
 
+ NTT and Mitsubishi have patents and pending patents on the Camellia
+ algorithm, but allow use at no charge without requiring an explicit
+ licensing agreement: http://info.isl.ntt.co.jp/crypt/eng/info/chiteki.html
+
  INSTALLATION
  ------------
 
@@ -156,7 +161,7 @@
     - Stack Traceback (if the application dumps core)
 
  Report the bug to the OpenSSL project via the Request Tracker
- (http://www.openssl.org/support/rt2.html) by mail to:
+ (http://www.openssl.org/support/rt.html) by mail to:
 
     openssl-bugs@openssl.org
 

STATUS

@@ -1,10 +1,29 @@
 
   OpenSSL STATUS                           Last modified at
-  ______________                           $Date: 2005/04/25 21:42:14 $
+  ______________                           $Date: 2009/11/05 14:09:14 $
 
   DEVELOPMENT STATE
 
-    o  OpenSSL 0.9.8:  Under development...
+    o  OpenSSL 0.9.9:  Under development...
+    o  OpenSSL 0.9.8l: Released on November   5th, 2009
+    o  OpenSSL 0.9.8k: Released on March     25th, 2009
+    o  OpenSSL 0.9.8j: Released on January    7th, 2009
+    o  OpenSSL 0.9.8i: Released on September 15th, 2008
+    o  OpenSSL 0.9.8h: Released on May       28th, 2008
+    o  OpenSSL 0.9.8g: Released on October   19th, 2007
+    o  OpenSSL 0.9.8f: Released on October   11th, 2007
+    o  OpenSSL 0.9.8e: Released on February  23rd, 2007
+    o  OpenSSL 0.9.8d: Released on September 28th, 2006
+    o  OpenSSL 0.9.8c: Released on September  5th, 2006
+    o  OpenSSL 0.9.8b: Released on May        4th, 2006
+    o  OpenSSL 0.9.8a: Released on October   11th, 2005
+    o  OpenSSL 0.9.8:  Released on July       5th, 2005
+    o  OpenSSL 0.9.7m: Released on February  23rd, 2007
+    o  OpenSSL 0.9.7l: Released on September 28th, 2006
+    o  OpenSSL 0.9.7k: Released on September  5th, 2006
+    o  OpenSSL 0.9.7j: Released on May        4th, 2006
+    o  OpenSSL 0.9.7i: Released on October   14th, 2005
+    o  OpenSSL 0.9.7h: Released on October   11th, 2005
     o  OpenSSL 0.9.7g: Released on April     11th, 2005
     o  OpenSSL 0.9.7f: Released on March     22nd, 2005
     o  OpenSSL 0.9.7e: Released on October   25th, 2004
@@ -35,10 +54,11 @@
     o  OpenSSL 0.9.2b: Released on March     22th, 1999
     o  OpenSSL 0.9.1c: Released on December  23th, 1998
 
-  [See also http://www.openssl.org/support/rt2.html]
+  [See also http://www.openssl.org/support/rt.html]
 
   RELEASE SHOWSTOPPERS
 
+    o The Makefiles fail with some SysV makes.
     o 
 
   AVAILABLE PATCHES
@@ -55,16 +75,8 @@
 	Private key, certificate and CRL API and implementation.
 	Developing and bugfixing PKCS#7 (S/MIME code).
         Various X509 issues: character sets, certificate request extensions.
-    o Geoff and Richard are currently working on:
-	ENGINE (the new code that gives hardware support among others).
     o Richard is currently working on:
-	UI (User Interface)
-	UTIL (a new set of library functions to support some higher level
-	      functionality that is currently missing).
-	Shared library support for VMS.
-	Kerberos 5 authentication (Heimdal)
 	Constification
-	Compression
 	Attribute Certificate support
 	Certificate Pair support
 	Storage Engines (primarly an LDAP storage engine)

apps/CA.pl.in

@@ -68,19 +68,19 @@ foreach (@ARGV) {
 	    exit 0;
 	} elsif (/^-newcert$/) {
 	    # create a certificate
-	    system ("$REQ -new -x509 -keyout newreq.pem -out newreq.pem $DAYS");
+	    system ("$REQ -new -x509 -keyout newkey.pem -out newcert.pem $DAYS");
 	    $RET=$?;
-	    print "Certificate (and private key) is in newreq.pem\n"
+	    print "Certificate is in newcert.pem, private key is in newkey.pem\n"
 	} elsif (/^-newreq$/) {
 	    # create a certificate request
-	    system ("$REQ -new -keyout newreq.pem -out newreq.pem $DAYS");
+	    system ("$REQ -new -keyout newkey.pem -out newreq.pem $DAYS");
 	    $RET=$?;
-	    print "Request (and private key) is in newreq.pem\n";
+	    print "Request is in newreq.pem, private key is in newkey.pem\n";
 	} elsif (/^-newreq-nodes$/) {
 	    # create a certificate request
-	    system ("$REQ -new -nodes -keyout newreq.pem -out newreq.pem $DAYS");
+	    system ("$REQ -new -nodes -keyout newkey.pem -out newreq.pem $DAYS");
 	    $RET=$?;
-	    print "Request (and private key) is in newreq.pem\n";
+	    print "Request is in newreq.pem, private key is in newkey.pem\n";
 	} elsif (/^-newca$/) {
 		# if explicitly asked for or it doesn't exist then setup the
 		# directory structure that Eric likes to manage things 
@@ -94,6 +94,9 @@ foreach (@ARGV) {
 		mkdir "${CATOP}/private", $DIRMODE;
 		open OUT, ">${CATOP}/index.txt";
 		close OUT;
+		open OUT, ">${CATOP}/crlnumber";
+		print OUT "01\n";
+		close OUT;
 	    }
 	    if ( ! -f "${CATOP}/private/$CAKEY" ) {
 		print "CA certificate filename (or enter to create)\n";
@@ -113,6 +116,7 @@ foreach (@ARGV) {
 		    system ("$CA -create_serial " .
 			"-out ${CATOP}/$CACERT $CADAYS -batch " . 
 			"-keyfile ${CATOP}/private/$CAKEY -selfsign " .
+			"-extensions v3_ca " .
 			"-infiles ${CATOP}/$CAREQ ");
 		    $RET=$?;
 		}
@@ -120,10 +124,11 @@ foreach (@ARGV) {
 	} elsif (/^-pkcs12$/) {
 	    my $cname = $ARGV[1];
 	    $cname = "My Certificate" unless defined $cname;
-	    system ("$PKCS12 -in newcert.pem -inkey newreq.pem " .
+	    system ("$PKCS12 -in newcert.pem -inkey newkey.pem " .
 			"-certfile ${CATOP}/$CACERT -out newcert.p12 " .
 			"-export -name \"$cname\"");
 	    $RET=$?;
+	    print "PKCS #12 file is in newcert.p12\n";
 	    exit $RET;
 	} elsif (/^-xsign$/) {
 	    system ("$CA -policy policy_anything -infiles newreq.pem");

apps/CA.sh

@@ -53,15 +53,15 @@ case $i in
     ;;
 -newcert) 
     # create a certificate
-    $REQ -new -x509 -keyout newreq.pem -out newreq.pem $DAYS
+    $REQ -new -x509 -keyout newkey.pem -out newcert.pem $DAYS
     RET=$?
-    echo "Certificate (and private key) is in newreq.pem"
+    echo "Certificate is in newcert.pem, private key is in newkey.pem"
     ;;
 -newreq) 
     # create a certificate request
-    $REQ -new -keyout newreq.pem -out newreq.pem $DAYS
+    $REQ -new -keyout newkey.pem -out newreq.pem $DAYS
     RET=$?
-    echo "Request (and private key) is in newreq.pem"
+    echo "Request is in newreq.pem, private key is in newkey.pem"
     ;;
 -newca)     
     # if explicitly asked for or it doesn't exist then setup the directory

apps/apps.c

@@ -115,6 +115,7 @@
 #include <sys/types.h>
 #include <sys/stat.h>
 #include <ctype.h>
+#include <assert.h>
 #include <openssl/err.h>
 #include <openssl/x509.h>
 #include <openssl/x509v3.h>
@@ -125,8 +126,13 @@
 #ifndef OPENSSL_NO_ENGINE
 #include <openssl/engine.h>
 #endif
+#ifndef OPENSSL_NO_RSA
 #include <openssl/rsa.h>
+#endif
 #include <openssl/bn.h>
+#ifndef OPENSSL_NO_JPAKE
+#include <openssl/jpake.h>
+#endif
 
 #define NON_MAIN
 #include "apps.h"
@@ -374,10 +380,17 @@ int chopup_args(ARGS *arg, char *buf, int *argc, char **argv[])
 		/* The start of something good :-) */
 		if (num >= arg->count)
 			{
-			arg->count+=20;
-			arg->data=(char **)OPENSSL_realloc(arg->data,
-				sizeof(char *)*arg->count);
-			if (argc == 0) return(0);
+			char **tmp_p;
+			int tlen = arg->count + 20;
+			tmp_p = (char **)OPENSSL_realloc(arg->data,
+				sizeof(char *)*tlen);
+			if (tmp_p == NULL)
+				return 0;
+			arg->data  = tmp_p;
+			arg->count = tlen;
+			/* initialize newly allocated data */
+			for (i = num; i < arg->count; i++)
+				arg->data[i] = NULL;
 			}
 		arg->data[num++]=p;
 
@@ -1604,8 +1617,9 @@ int rotate_serial(char *serialfile, char *new_suffix, char *old_suffix)
 		{
 		if (errno != ENOENT 
 #ifdef ENOTDIR
-			&& errno != ENOTDIR)
+			&& errno != ENOTDIR
 #endif
+		   )
 			goto err;
 		}
 	else
@@ -1893,8 +1907,9 @@ int rotate_index(const char *dbfile, const char *new_suffix, const char *old_suf
 		{
 		if (errno != ENOENT 
 #ifdef ENOTDIR
-			&& errno != ENOTDIR)
+			&& errno != ENOTDIR
 #endif
+		   )
 			goto err;
 		}
 	else
@@ -1929,8 +1944,9 @@ int rotate_index(const char *dbfile, const char *new_suffix, const char *old_suf
 		{
 		if (errno != ENOENT 
 #ifdef ENOTDIR
-			&& errno != ENOTDIR)
+			&& errno != ENOTDIR
 #endif
+		   )
 			goto err;
 		}
 	else
@@ -1998,7 +2014,7 @@ int parse_yesno(const char *str, int def)
 		case 'y': /* yes */
 		case 'Y': /* YES */
 		case '1': /* 1 */
-			ret = 0;
+			ret = 1;
 			break;
 		default:
 			ret = def;
@@ -2321,3 +2337,233 @@ void policies_print(BIO *out, X509_STORE_CTX *ctx)
 	if (free_out)
 		BIO_free(out);
 	}
+
+#ifndef OPENSSL_NO_JPAKE
+
+static JPAKE_CTX *jpake_init(const char *us, const char *them,
+							 const char *secret)
+	{
+	BIGNUM *p = NULL;
+	BIGNUM *g = NULL;
+	BIGNUM *q = NULL;
+	BIGNUM *bnsecret = BN_new();
+	JPAKE_CTX *ctx;
+
+	/* Use a safe prime for p (that we found earlier) */
+	BN_hex2bn(&p, "F9E5B365665EA7A05A9C534502780FEE6F1AB5BD4F49947FD036DBD7E905269AF46EF28B0FC07487EE4F5D20FB3C0AF8E700F3A2FA3414970CBED44FEDFF80CE78D800F184BB82435D137AADA2C6C16523247930A63B85661D1FC817A51ACD96168E95898A1F83A79FFB529368AA7833ABD1B0C3AEDDB14D2E1A2F71D99F763F");
+	g = BN_new();
+	BN_set_word(g, 2);
+	q = BN_new();
+	BN_rshift1(q, p);
+
+	BN_bin2bn((const unsigned char *)secret, strlen(secret), bnsecret);
+
+	ctx = JPAKE_CTX_new(us, them, p, g, q, bnsecret);
+	BN_free(bnsecret);
+	BN_free(q);
+	BN_free(g);
+	BN_free(p);
+
+	return ctx;
+	}
+
+static void jpake_send_part(BIO *conn, const JPAKE_STEP_PART *p)
+	{
+	BN_print(conn, p->gx);
+	BIO_puts(conn, "\n");
+	BN_print(conn, p->zkpx.gr);
+	BIO_puts(conn, "\n");
+	BN_print(conn, p->zkpx.b);
+	BIO_puts(conn, "\n");
+	}
+
+static void jpake_send_step1(BIO *bconn, JPAKE_CTX *ctx)
+	{
+	JPAKE_STEP1 s1;
+
+	JPAKE_STEP1_init(&s1);
+	JPAKE_STEP1_generate(&s1, ctx);
+	jpake_send_part(bconn, &s1.p1);
+	jpake_send_part(bconn, &s1.p2);
+	(void)BIO_flush(bconn);
+	JPAKE_STEP1_release(&s1);
+	}
+
+static void jpake_send_step2(BIO *bconn, JPAKE_CTX *ctx)
+	{
+	JPAKE_STEP2 s2;
+
+	JPAKE_STEP2_init(&s2);
+	JPAKE_STEP2_generate(&s2, ctx);
+	jpake_send_part(bconn, &s2);
+	(void)BIO_flush(bconn);
+	JPAKE_STEP2_release(&s2);
+	}
+
+static void jpake_send_step3a(BIO *bconn, JPAKE_CTX *ctx)
+	{
+	JPAKE_STEP3A s3a;
+
+	JPAKE_STEP3A_init(&s3a);
+	JPAKE_STEP3A_generate(&s3a, ctx);
+	BIO_write(bconn, s3a.hhk, sizeof s3a.hhk);
+	(void)BIO_flush(bconn);
+	JPAKE_STEP3A_release(&s3a);
+	}
+
+static void jpake_send_step3b(BIO *bconn, JPAKE_CTX *ctx)
+	{
+	JPAKE_STEP3B s3b;
+
+	JPAKE_STEP3B_init(&s3b);
+	JPAKE_STEP3B_generate(&s3b, ctx);
+	BIO_write(bconn, s3b.hk, sizeof s3b.hk);
+	(void)BIO_flush(bconn);
+	JPAKE_STEP3B_release(&s3b);
+	}
+
+static void readbn(BIGNUM **bn, BIO *bconn)
+	{
+	char buf[10240];
+	int l;
+
+	l = BIO_gets(bconn, buf, sizeof buf);
+	assert(l > 0);
+	assert(buf[l-1] == '\n');
+	buf[l-1] = '\0';
+	BN_hex2bn(bn, buf);
+	}
+
+static void jpake_receive_part(JPAKE_STEP_PART *p, BIO *bconn)
+	{
+	readbn(&p->gx, bconn);
+	readbn(&p->zkpx.gr, bconn);
+	readbn(&p->zkpx.b, bconn);
+	}
+
+static void jpake_receive_step1(JPAKE_CTX *ctx, BIO *bconn)
+	{
+	JPAKE_STEP1 s1;
+
+	JPAKE_STEP1_init(&s1);
+	jpake_receive_part(&s1.p1, bconn);
+	jpake_receive_part(&s1.p2, bconn);
+	if(!JPAKE_STEP1_process(ctx, &s1))
+		{
+		ERR_print_errors(bio_err);
+		exit(1);
+		}
+	JPAKE_STEP1_release(&s1);
+	}
+
+static void jpake_receive_step2(JPAKE_CTX *ctx, BIO *bconn)
+	{
+	JPAKE_STEP2 s2;
+
+	JPAKE_STEP2_init(&s2);
+	jpake_receive_part(&s2, bconn);
+	if(!JPAKE_STEP2_process(ctx, &s2))
+		{
+		ERR_print_errors(bio_err);
+		exit(1);
+		}
+	JPAKE_STEP2_release(&s2);
+	}
+
+static void jpake_receive_step3a(JPAKE_CTX *ctx, BIO *bconn)
+	{
+	JPAKE_STEP3A s3a;
+	int l;
+
+	JPAKE_STEP3A_init(&s3a);
+	l = BIO_read(bconn, s3a.hhk, sizeof s3a.hhk);
+	assert(l == sizeof s3a.hhk);
+	if(!JPAKE_STEP3A_process(ctx, &s3a))
+		{
+		ERR_print_errors(bio_err);
+		exit(1);
+		}
+	JPAKE_STEP3A_release(&s3a);
+	}
+
+static void jpake_receive_step3b(JPAKE_CTX *ctx, BIO *bconn)
+	{
+	JPAKE_STEP3B s3b;
+	int l;
+
+	JPAKE_STEP3B_init(&s3b);
+	l = BIO_read(bconn, s3b.hk, sizeof s3b.hk);
+	assert(l == sizeof s3b.hk);
+	if(!JPAKE_STEP3B_process(ctx, &s3b))
+		{
+		ERR_print_errors(bio_err);
+		exit(1);
+		}
+	JPAKE_STEP3B_release(&s3b);
+	}
+
+void jpake_client_auth(BIO *out, BIO *conn, const char *secret)
+	{
+	JPAKE_CTX *ctx;
+	BIO *bconn;
+
+	BIO_puts(out, "Authenticating with JPAKE\n");
+
+	ctx = jpake_init("client", "server", secret);
+
+	bconn = BIO_new(BIO_f_buffer());
+	BIO_push(bconn, conn);
+
+	jpake_send_step1(bconn, ctx);
+	jpake_receive_step1(ctx, bconn);
+	jpake_send_step2(bconn, ctx);
+	jpake_receive_step2(ctx, bconn);
+	jpake_send_step3a(bconn, ctx);
+	jpake_receive_step3b(ctx, bconn);
+
+	/*
+	 * The problem is that you must use the derived key in the
+	 * session key or you are subject to man-in-the-middle
+	 * attacks.
+	 */
+	BIO_puts(out, "JPAKE authentication succeeded (N.B. This version can"
+		 " be MitMed. See the version in HEAD for how to do it"
+		 " properly)\n");
+
+	BIO_pop(bconn);
+	BIO_free(bconn);
+	}
+
+void jpake_server_auth(BIO *out, BIO *conn, const char *secret)
+	{
+	JPAKE_CTX *ctx;
+	BIO *bconn;
+
+	BIO_puts(out, "Authenticating with JPAKE\n");
+
+	ctx = jpake_init("server", "client", secret);
+
+	bconn = BIO_new(BIO_f_buffer());
+	BIO_push(bconn, conn);
+
+	jpake_receive_step1(ctx, bconn);
+	jpake_send_step1(bconn, ctx);
+	jpake_receive_step2(ctx, bconn);
+	jpake_send_step2(bconn, ctx);
+	jpake_receive_step3a(ctx, bconn);
+	jpake_send_step3b(bconn, ctx);
+
+	/*
+	 * The problem is that you must use the derived key in the
+	 * session key or you are subject to man-in-the-middle
+	 * attacks.
+	 */
+	BIO_puts(out, "JPAKE authentication succeeded (N.B. This version can"
+		 " be MitMed. See the version in HEAD for how to do it"
+		 " properly)\n");
+
+	BIO_pop(bconn);
+	BIO_free(bconn);
+	}
+
+#endif

apps/apps.h

@@ -122,6 +122,9 @@
 #ifndef OPENSSL_NO_ENGINE
 #include <openssl/engine.h>
 #endif
+#ifndef OPENSSL_NO_OCSP
+#include <openssl/ocsp.h>
+#endif
 #include <openssl/ossl_typ.h>
 
 int app_RAND_load_file(const char *file, BIO *bio_e, int dont_warn);
@@ -146,9 +149,11 @@ int WIN32_rename(const char *oldname,const char *newname);
 #ifndef NON_MAIN
 CONF *config=NULL;
 BIO *bio_err=NULL;
+int in_FIPS_mode=0;
 #else
 extern CONF *config;
 extern BIO *bio_err;
+extern int in_FIPS_mode;
 #endif
 
 #else
@@ -157,6 +162,7 @@ extern BIO *bio_err;
 extern CONF *config;
 extern char *default_config_file;
 extern BIO *bio_err;
+extern int in_FIPS_mode;
 
 #endif
 
@@ -228,6 +234,12 @@ extern BIO *bio_err;
 #  endif
 #endif
 
+#ifdef OPENSSL_SYSNAME_WIN32
+#  define openssl_fdset(a,b) FD_SET((unsigned int)a, b)
+#else
+#  define openssl_fdset(a,b) FD_SET(a, b)
+#endif
+
 typedef struct args_st
 	{
 	char **data;
@@ -275,6 +287,12 @@ X509_STORE *setup_verify(BIO *bp, char *CAfile, char *CApath);
 ENGINE *setup_engine(BIO *err, const char *engine, int debug);
 #endif
 
+#ifndef OPENSSL_NO_OCSP
+OCSP_RESPONSE *process_responder(BIO *err, OCSP_REQUEST *req,
+			char *host, char *path, char *port, int use_ssl,
+			int req_timeout);
+#endif
+
 int load_config(BIO *err, CONF *cnf);
 char *make_config_name(void);
 
@@ -320,6 +338,10 @@ X509_NAME *parse_name(char *str, long chtype, int multirdn);
 int args_verify(char ***pargs, int *pargc,
 			int *badarg, BIO *err, X509_VERIFY_PARAM **pm);
 void policies_print(BIO *out, X509_STORE_CTX *ctx);
+#ifndef OPENSSL_NO_JPAKE
+void jpake_client_auth(BIO *out, BIO *conn, const char *secret);
+void jpake_server_auth(BIO *out, BIO *conn, const char *secret);
+#endif
 
 #define FORMAT_UNDEF    0
 #define FORMAT_ASN1     1

apps/asn1pars.c

@@ -56,7 +56,7 @@
  * [including the GNU Public Licence.]
  */
 
-/* A nice addition from Dr Stephen Henson <shenson@bigfoot.com> to 
+/* A nice addition from Dr Stephen Henson <steve@openssl.org> to 
  * add the -strparse option which parses nested binary structures
  */
 
@@ -196,7 +196,7 @@ int MAIN(int argc, char **argv)
 bad:
 		BIO_printf(bio_err,"%s [options] <infile\n",prog);
 		BIO_printf(bio_err,"where options are\n");
-		BIO_printf(bio_err," -inform arg   input format - one of DER TXT PEM\n");
+		BIO_printf(bio_err," -inform arg   input format - one of DER PEM\n");
 		BIO_printf(bio_err," -in arg       input file\n");
 		BIO_printf(bio_err," -out arg      output file (output format is always DER\n");
 		BIO_printf(bio_err," -noout arg    don't produce any output\n");

apps/ca.c

@@ -83,7 +83,7 @@
 #    else
 #      include <unixlib.h>
 #    endif
-#  elif !defined(OPENSSL_SYS_VXWORKS) && !defined(OPENSSL_SYS_WINDOWS) && !defined(OPENSSL_SYS_NETWARE)
+#  elif !defined(OPENSSL_SYS_VXWORKS) && !defined(OPENSSL_SYS_WINDOWS) && !defined(OPENSSL_SYS_NETWARE) && !defined(__TANDEM)
 #    include <sys/file.h>
 #  endif
 #endif
@@ -105,6 +105,9 @@
 
 #define ENV_DEFAULT_CA		"default_ca"
 
+#define STRING_MASK	"string_mask"
+#define UTF8_IN			"utf8"
+
 #define ENV_DIR			"dir"
 #define ENV_CERTS		"certs"
 #define ENV_CRL_DIR		"crl_dir"
@@ -174,6 +177,7 @@ static const char *ca_usage[]={
 " -msie_hack      - msie modifications to handle all those universal strings\n",
 " -revoke file    - Revoke a certificate (given in file)\n",
 " -subj arg       - Use arg instead of request's subject\n",
+" -utf8           - input characters are UTF8 (default ASCII)\n",
 " -multivalue-rdn - enable support for multivalued RDNs\n",
 " -extensions ..  - Extension section (override value in config file)\n",
 " -extfile file   - Configuration file with X509v3 extentions to add\n",
@@ -195,27 +199,27 @@ extern int EF_ALIGNMENT;
 static void lookup_fail(const char *name, const char *tag);
 static int certify(X509 **xret, char *infile,EVP_PKEY *pkey,X509 *x509,
 		   const EVP_MD *dgst,STACK_OF(CONF_VALUE) *policy,CA_DB *db,
-		   BIGNUM *serial, char *subj, int multirdn, int email_dn, char *startdate,
+		   BIGNUM *serial, char *subj,unsigned long chtype, int multirdn, int email_dn, char *startdate,
 		   char *enddate, long days, int batch, char *ext_sect, CONF *conf,
 		   int verbose, unsigned long certopt, unsigned long nameopt,
 		   int default_op, int ext_copy, int selfsign);
 static int certify_cert(X509 **xret, char *infile,EVP_PKEY *pkey,X509 *x509,
 			const EVP_MD *dgst,STACK_OF(CONF_VALUE) *policy,
-			CA_DB *db, BIGNUM *serial, char *subj, int multirdn, int email_dn,
+			CA_DB *db, BIGNUM *serial, char *subj,unsigned long chtype, int multirdn, int email_dn,
 			char *startdate, char *enddate, long days, int batch,
 			char *ext_sect, CONF *conf,int verbose, unsigned long certopt,
 			unsigned long nameopt, int default_op, int ext_copy,
 			ENGINE *e);
 static int certify_spkac(X509 **xret, char *infile,EVP_PKEY *pkey,X509 *x509,
 			 const EVP_MD *dgst,STACK_OF(CONF_VALUE) *policy,
-			 CA_DB *db, BIGNUM *serial,char *subj, int multirdn, int email_dn,
+			 CA_DB *db, BIGNUM *serial,char *subj,unsigned long chtype, int multirdn, int email_dn,
 			 char *startdate, char *enddate, long days, char *ext_sect,
 			 CONF *conf, int verbose, unsigned long certopt, 
 			 unsigned long nameopt, int default_op, int ext_copy);
 static int fix_data(int nid, int *type);
 static void write_new_certificate(BIO *bp, X509 *x, int output_der, int notext);
 static int do_body(X509 **xret, EVP_PKEY *pkey, X509 *x509, const EVP_MD *dgst,
-	STACK_OF(CONF_VALUE) *policy, CA_DB *db, BIGNUM *serial,char *subj, int multirdn,
+	STACK_OF(CONF_VALUE) *policy, CA_DB *db, BIGNUM *serial,char *subj,unsigned long chtype, int multirdn,
 	int email_dn, char *startdate, char *enddate, long days, int batch,
        	int verbose, X509_REQ *req, char *ext_sect, CONF *conf,
 	unsigned long certopt, unsigned long nameopt, int default_op,
@@ -275,6 +279,7 @@ int MAIN(int argc, char **argv)
 	char *extensions=NULL;
 	char *extfile=NULL;
 	char *subj=NULL;
+	unsigned long chtype = MBSTRING_ASC;
 	int multirdn = 0;
 	char *tmp_email_dn=NULL;
 	char *crl_ext=NULL;
@@ -356,6 +361,8 @@ EF_ALIGNMENT=0;
 			subj= *(++argv);
 			/* preserve=1; */
 			}
+		else if (strcmp(*argv,"-utf8") == 0)
+			chtype = MBSTRING_UTF8;
 		else if (strcmp(*argv,"-create_serial") == 0)
 			create_ser = 1;
 		else if (strcmp(*argv,"-multivalue-rdn") == 0)
@@ -645,6 +652,23 @@ bad:
 		ERR_clear_error();
 	app_RAND_load_file(randfile, bio_err, 0);
 
+	f = NCONF_get_string(conf, section, STRING_MASK);
+	if (!f)
+		ERR_clear_error();
+
+	if(f && !ASN1_STRING_set_default_mask_asc(f)) {
+		BIO_printf(bio_err, "Invalid global string mask setting %s\n", f);
+		goto err;
+	}
+
+	if (chtype != MBSTRING_UTF8){
+		f = NCONF_get_string(conf, section, UTF8_IN);
+		if (!f)
+			ERR_clear_error();
+		else if (!strcmp(f, "yes"))
+			chtype = MBSTRING_UTF8;
+	}
+
 	db_attr.unique_subject = 1;
 	p = NCONF_get_string(conf, section, ENV_UNIQUE_SUBJECT);
 	if (p)
@@ -945,7 +969,6 @@ bad:
 			if (verbose) BIO_printf(bio_err,
 				"Done. %d entries marked as expired\n",i); 
 	      		}
-			goto err;
 	  	}
 
  	/*****************************************************************/
@@ -1135,7 +1158,7 @@ bad:
 			{
 			total++;
 			j=certify_spkac(&x,spkac_file,pkey,x509,dgst,attribs,db,
-				serial,subj,multirdn,email_dn,startdate,enddate,days,extensions,
+				serial,subj,chtype,multirdn,email_dn,startdate,enddate,days,extensions,
 				conf,verbose,certopt,nameopt,default_op,ext_copy);
 			if (j < 0) goto err;
 			if (j > 0)
@@ -1159,7 +1182,7 @@ bad:
 			{
 			total++;
 			j=certify_cert(&x,ss_cert_file,pkey,x509,dgst,attribs,
-				db,serial,subj,multirdn,email_dn,startdate,enddate,days,batch,
+				db,serial,subj,chtype,multirdn,email_dn,startdate,enddate,days,batch,
 				extensions,conf,verbose, certopt, nameopt,
 				default_op, ext_copy, e);
 			if (j < 0) goto err;
@@ -1179,7 +1202,7 @@ bad:
 			{
 			total++;
 			j=certify(&x,infile,pkey,x509p,dgst,attribs,db,
-				serial,subj,multirdn,email_dn,startdate,enddate,days,batch,
+				serial,subj,chtype,multirdn,email_dn,startdate,enddate,days,batch,
 				extensions,conf,verbose, certopt, nameopt,
 				default_op, ext_copy, selfsign);
 			if (j < 0) goto err;
@@ -1199,7 +1222,7 @@ bad:
 			{
 			total++;
 			j=certify(&x,argv[i],pkey,x509p,dgst,attribs,db,
-				serial,subj,multirdn,email_dn,startdate,enddate,days,batch,
+				serial,subj,chtype,multirdn,email_dn,startdate,enddate,days,batch,
 				extensions,conf,verbose, certopt, nameopt,
 				default_op, ext_copy, selfsign);
 			if (j < 0) goto err;
@@ -1497,6 +1520,7 @@ err:
 	if (x509) X509_free(x509);
 	X509_CRL_free(crl);
 	NCONF_free(conf);
+	NCONF_free(extconf);
 	OBJ_cleanup();
 	apps_shutdown();
 	OPENSSL_EXIT(ret);
@@ -1509,7 +1533,7 @@ static void lookup_fail(const char *name, const char *tag)
 
 static int certify(X509 **xret, char *infile, EVP_PKEY *pkey, X509 *x509,
 	     const EVP_MD *dgst, STACK_OF(CONF_VALUE) *policy, CA_DB *db,
-	     BIGNUM *serial, char *subj, int multirdn, int email_dn, char *startdate, char *enddate,
+	     BIGNUM *serial, char *subj,unsigned long chtype, int multirdn, int email_dn, char *startdate, char *enddate,
 	     long days, int batch, char *ext_sect, CONF *lconf, int verbose,
 	     unsigned long certopt, unsigned long nameopt, int default_op,
 	     int ext_copy, int selfsign)
@@ -1565,7 +1589,7 @@ static int certify(X509 **xret, char *infile, EVP_PKEY *pkey, X509 *x509,
 	else
 		BIO_printf(bio_err,"Signature ok\n");
 
-	ok=do_body(xret,pkey,x509,dgst,policy,db,serial,subj, multirdn, email_dn,
+	ok=do_body(xret,pkey,x509,dgst,policy,db,serial,subj,chtype,multirdn, email_dn,
 		startdate,enddate,days,batch,verbose,req,ext_sect,lconf,
 		certopt, nameopt, default_op, ext_copy, selfsign);
 
@@ -1577,7 +1601,7 @@ err:
 
 static int certify_cert(X509 **xret, char *infile, EVP_PKEY *pkey, X509 *x509,
 	     const EVP_MD *dgst, STACK_OF(CONF_VALUE) *policy, CA_DB *db,
-	     BIGNUM *serial, char *subj, int multirdn, int email_dn, char *startdate, char *enddate,
+	     BIGNUM *serial, char *subj, unsigned long chtype, int multirdn, int email_dn, char *startdate, char *enddate,
 	     long days, int batch, char *ext_sect, CONF *lconf, int verbose,
 	     unsigned long certopt, unsigned long nameopt, int default_op,
 	     int ext_copy, ENGINE *e)
@@ -1619,7 +1643,7 @@ static int certify_cert(X509 **xret, char *infile, EVP_PKEY *pkey, X509 *x509,
 	if ((rreq=X509_to_X509_REQ(req,NULL,EVP_md5())) == NULL)
 		goto err;
 
-	ok=do_body(xret,pkey,x509,dgst,policy,db,serial,subj,multirdn,email_dn,startdate,enddate,
+	ok=do_body(xret,pkey,x509,dgst,policy,db,serial,subj,chtype,multirdn,email_dn,startdate,enddate,
 		days,batch,verbose,rreq,ext_sect,lconf, certopt, nameopt, default_op,
 		ext_copy, 0);
 
@@ -1631,7 +1655,7 @@ err:
 
 static int do_body(X509 **xret, EVP_PKEY *pkey, X509 *x509, const EVP_MD *dgst,
 	     STACK_OF(CONF_VALUE) *policy, CA_DB *db, BIGNUM *serial, char *subj,
-	     int multirdn,
+	     unsigned long chtype, int multirdn,
 	     int email_dn, char *startdate, char *enddate, long days, int batch,
 	     int verbose, X509_REQ *req, char *ext_sect, CONF *lconf,
 	     unsigned long certopt, unsigned long nameopt, int default_op,
@@ -1664,7 +1688,7 @@ static int do_body(X509 **xret, EVP_PKEY *pkey, X509 *x509, const EVP_MD *dgst,
 
 	if (subj)
 		{
-		X509_NAME *n = parse_name(subj, MBSTRING_ASC, multirdn);
+		X509_NAME *n = parse_name(subj, chtype, multirdn);
 
 		if (!n)
 			{
@@ -2201,7 +2225,7 @@ static void write_new_certificate(BIO *bp, X509 *x, int output_der, int notext)
 
 static int certify_spkac(X509 **xret, char *infile, EVP_PKEY *pkey, X509 *x509,
 	     const EVP_MD *dgst, STACK_OF(CONF_VALUE) *policy, CA_DB *db,
-	     BIGNUM *serial, char *subj, int multirdn, int email_dn, char *startdate, char *enddate,
+	     BIGNUM *serial, char *subj,unsigned long chtype, int multirdn, int email_dn, char *startdate, char *enddate,
 	     long days, char *ext_sect, CONF *lconf, int verbose, unsigned long certopt,
 	     unsigned long nameopt, int default_op, int ext_copy)
 	{
@@ -2342,7 +2366,7 @@ static int certify_spkac(X509 **xret, char *infile, EVP_PKEY *pkey, X509 *x509,
 
 	X509_REQ_set_pubkey(req,pktmp);
 	EVP_PKEY_free(pktmp);
-	ok=do_body(xret,pkey,x509,dgst,policy,db,serial,subj,multirdn,email_dn,startdate,enddate,
+	ok=do_body(xret,pkey,x509,dgst,policy,db,serial,subj,chtype,multirdn,email_dn,startdate,enddate,
 		   days,1,verbose,req,ext_sect,lconf, certopt, nameopt, default_op,
 			ext_copy, 0);
 err:
@@ -2858,13 +2882,22 @@ int old_entry_print(BIO *bp, ASN1_OBJECT *obj, ASN1_STRING *str)
 	p=(char *)str->data;
 	for (j=str->length; j>0; j--)
 		{
+#ifdef CHARSET_EBCDIC
+		if ((*p >= 0x20) && (*p <= 0x7e))
+			BIO_printf(bp,"%c",os_toebcdic[*p]);
+#else
 		if ((*p >= ' ') && (*p <= '~'))
 			BIO_printf(bp,"%c",*p);
+#endif
 		else if (*p & 0x80)
 			BIO_printf(bp,"\\0x%02X",*p);
 		else if ((unsigned char)*p == 0xf7)
 			BIO_printf(bp,"^?");
+#ifdef CHARSET_EBCDIC
+		else	BIO_printf(bp,"^%c",os_toebcdic[*p+0x40]);
+#else
 		else	BIO_printf(bp,"^%c",*p+'@');
+#endif
 		p++;
 		}
 	BIO_printf(bp,"'\n");

apps/crl.c

@@ -85,6 +85,7 @@ static const char *crl_usage[]={
 " -issuer         - print issuer DN\n",
 " -lastupdate     - lastUpdate field\n",
 " -nextupdate     - nextUpdate field\n",
+" -crlnumber      - print CRL number\n",
 " -noout          - no CRL output\n",
 " -CAfile  name   - verify CRL using certificates in file \"name\"\n",
 " -CApath  dir    - verify CRL using certificates in \"dir\"\n",
@@ -107,7 +108,7 @@ int MAIN(int argc, char **argv)
 	int informat,outformat;
 	char *infile=NULL,*outfile=NULL;
 	int hash=0,issuer=0,lastupdate=0,nextupdate=0,noout=0,text=0;
-	int fingerprint = 0;
+	int fingerprint = 0, crlnumber = 0;
 	const char **pp;
 	X509_STORE *store = NULL;
 	X509_STORE_CTX ctx;
@@ -206,6 +207,8 @@ int MAIN(int argc, char **argv)
 			noout= ++num;
 		else if (strcmp(*argv,"-fingerprint") == 0)
 			fingerprint= ++num;
+		else if (strcmp(*argv,"-crlnumber") == 0)
+			crlnumber= ++num;
 		else if ((md_alg=EVP_get_digestbyname(*argv + 1)))
 			{
 			/* ok */
@@ -281,7 +284,21 @@ bad:
 				{
 				print_name(bio_out, "issuer=", X509_CRL_get_issuer(x), nmflag);
 				}
-
+			if (crlnumber == i)
+				{
+				ASN1_INTEGER *crlnum;
+				crlnum = X509_CRL_get_ext_d2i(x, NID_crl_number,
+							      NULL, NULL);
+				BIO_printf(bio_out,"crlNumber=");
+				if (crlnum)
+					{
+					i2a_ASN1_INTEGER(bio_out, crlnum);
+					ASN1_INTEGER_free(crlnum);
+					}
+				else
+					BIO_puts(bio_out, "<NONE>");
+				BIO_printf(bio_out,"\n");
+				}
 			if (hash == i)
 				{
 				BIO_printf(bio_out,"%08lx\n",

apps/dgst.c

@@ -66,6 +66,7 @@
 #include <openssl/objects.h>
 #include <openssl/x509.h>
 #include <openssl/pem.h>
+#include <openssl/hmac.h>
 
 #undef BUFSIZE
 #define BUFSIZE	1024*8
@@ -75,7 +76,7 @@
 
 int do_fp(BIO *out, unsigned char *buf, BIO *bp, int sep, int binout,
 	  EVP_PKEY *key, unsigned char *sigin, int siglen, const char *title,
-	  const char *file);
+	  const char *file,BIO *bmd,const char *hmac_key, int non_fips_allow);
 
 int MAIN(int, char **);
 
@@ -83,7 +84,7 @@ int MAIN(int argc, char **argv)
 	{
 	ENGINE *e = NULL;
 	unsigned char *buf=NULL;
-	int i,err=0;
+	int i,err=1;
 	const EVP_MD *md=NULL,*m;
 	BIO *in=NULL,*inp;
 	BIO *bmd=NULL;
@@ -100,13 +101,16 @@ int MAIN(int argc, char **argv)
 	EVP_PKEY *sigkey = NULL;
 	unsigned char *sigbuf = NULL;
 	int siglen = 0;
+	unsigned int sig_flags = 0;
 	char *passargin = NULL, *passin = NULL;
 #ifndef OPENSSL_NO_ENGINE
 	char *engine=NULL;
 #endif
+	char *hmac_key=NULL;
+	int non_fips_allow = 0;
 
 	apps_startup();
-
+ERR_load_crypto_strings();
 	if ((buf=(unsigned char *)OPENSSL_malloc(BUFSIZE)) == NULL)
 		{
 		BIO_printf(bio_err,"out of memory\n");
@@ -165,6 +169,27 @@ int MAIN(int argc, char **argv)
 			keyfile=*(++argv);
 			do_verify = 1;
 			}
+		else if (strcmp(*argv,"-x931") == 0)
+			sig_flags = EVP_MD_CTX_FLAG_PAD_X931;
+		else if (strcmp(*argv,"-pss_saltlen") == 0)
+			{
+			int saltlen;
+			if (--argc < 1) break;
+			saltlen=atoi(*(++argv));
+			if (saltlen == -1)
+				sig_flags = EVP_MD_CTX_FLAG_PSS_MREC;
+			else if (saltlen == -2)
+				sig_flags = EVP_MD_CTX_FLAG_PSS_MDLEN;
+			else if (saltlen < -2 || saltlen >= 0xFFFE)
+				{
+				BIO_printf(bio_err, "Invalid PSS salt length %d\n", saltlen);
+				goto end;
+				}
+			else
+				sig_flags = saltlen;
+			sig_flags <<= 16;
+			sig_flags |= EVP_MD_CTX_FLAG_PAD_PSS;
+			}
 		else if (strcmp(*argv,"-signature") == 0)
 			{
 			if (--argc < 1) break;
@@ -188,6 +213,16 @@ int MAIN(int argc, char **argv)
 			out_bin = 1;
 		else if (strcmp(*argv,"-d") == 0)
 			debug=1;
+		else if (strcmp(*argv,"-non-fips-allow") == 0)
+			non_fips_allow=1;
+		else if (!strcmp(*argv,"-fips-fingerprint"))
+			hmac_key = "etaonrishdlcupfm";
+		else if (!strcmp(*argv,"-hmac"))
+			{
+			if (--argc < 1)
+				break;
+			hmac_key=*++argv;
+			}
 		else if ((m=EVP_get_digestbyname(&((*argv)[1]))) != NULL)
 			md=m;
 		else
@@ -219,33 +254,38 @@ int MAIN(int argc, char **argv)
 		BIO_printf(bio_err,"-keyform arg    key file format (PEM or ENGINE)\n");
 		BIO_printf(bio_err,"-signature file signature to verify\n");
 		BIO_printf(bio_err,"-binary         output in binary form\n");
+		BIO_printf(bio_err,"-hmac key       create hashed MAC with key\n");
 #ifndef OPENSSL_NO_ENGINE
 		BIO_printf(bio_err,"-engine e       use engine e, possibly a hardware device.\n");
 #endif
 
-		BIO_printf(bio_err,"-%3s to use the %s message digest algorithm (default)\n",
+		BIO_printf(bio_err,"-%-14s to use the %s message digest algorithm (default)\n",
 			LN_md5,LN_md5);
-		BIO_printf(bio_err,"-%3s to use the %s message digest algorithm\n",
+		BIO_printf(bio_err,"-%-14s to use the %s message digest algorithm\n",
 			LN_md4,LN_md4);
-		BIO_printf(bio_err,"-%3s to use the %s message digest algorithm\n",
+		BIO_printf(bio_err,"-%-14s to use the %s message digest algorithm\n",
 			LN_md2,LN_md2);
 #ifndef OPENSSL_NO_SHA
-		BIO_printf(bio_err,"-%3s to use the %s message digest algorithm\n",
+		BIO_printf(bio_err,"-%-14s to use the %s message digest algorithm\n",
 			LN_sha1,LN_sha1);
-		BIO_printf(bio_err,"-%3s to use the %s message digest algorithm\n",
+		BIO_printf(bio_err,"-%-14s to use the %s message digest algorithm\n",
 			LN_sha,LN_sha);
 #ifndef OPENSSL_NO_SHA256
-		BIO_printf(bio_err,"-%3s to use the %s message digest algorithm\n",
+		BIO_printf(bio_err,"-%-14s to use the %s message digest algorithm\n",
+			LN_sha224,LN_sha224);
+		BIO_printf(bio_err,"-%-14s to use the %s message digest algorithm\n",
 			LN_sha256,LN_sha256);
 #endif
 #ifndef OPENSSL_NO_SHA512
-		BIO_printf(bio_err,"-%3s to use the %s message digest algorithm\n",
+		BIO_printf(bio_err,"-%-14s to use the %s message digest algorithm\n",
+			LN_sha384,LN_sha384);
+		BIO_printf(bio_err,"-%-14s to use the %s message digest algorithm\n",
 			LN_sha512,LN_sha512);
 #endif
 #endif
-		BIO_printf(bio_err,"-%3s to use the %s message digest algorithm\n",
+		BIO_printf(bio_err,"-%-14s to use the %s message digest algorithm\n",
 			LN_mdc2,LN_mdc2);
-		BIO_printf(bio_err,"-%3s to use the %s message digest algorithm\n",
+		BIO_printf(bio_err,"-%-14s to use the %s message digest algorithm\n",
 			LN_ripemd160,LN_ripemd160);
 		err=1;
 		goto end;
@@ -261,7 +301,7 @@ int MAIN(int argc, char **argv)
 		{
 		BIO_set_callback(in,BIO_debug_callback);
 		/* needed for windows 3.1 */
-		BIO_set_callback_arg(in,bio_err);
+		BIO_set_callback_arg(in,(char *)bio_err);
 		}
 
 	if(!app_passwd(bio_err, passargin, NULL, &passin, NULL))
@@ -341,8 +381,20 @@ int MAIN(int argc, char **argv)
 			goto end;
 		}
 	}
-		
 
+	if (non_fips_allow)
+		{
+		EVP_MD_CTX *md_ctx;
+		BIO_get_md_ctx(bmd,&md_ctx);
+		EVP_MD_CTX_set_flags(md_ctx, EVP_MD_CTX_FLAG_NON_FIPS_ALLOW);
+		}
+
+	if (sig_flags)
+		{
+		EVP_MD_CTX *md_ctx;
+		BIO_get_md_ctx(bmd,&md_ctx);
+		EVP_MD_CTX_set_flags(md_ctx, sig_flags);
+		}
 
 	/* we use md as a filter, reading from 'in' */
 	if (!BIO_set_md(bmd,md))
@@ -358,11 +410,12 @@ int MAIN(int argc, char **argv)
 		{
 		BIO_set_fp(in,stdin,BIO_NOCLOSE);
 		err=do_fp(out, buf,inp,separator, out_bin, sigkey, sigbuf,
-			  siglen,"","(stdin)");
+			  siglen,"","(stdin)",bmd,hmac_key,non_fips_allow);
 		}
 	else
 		{
 		name=OBJ_nid2sn(md->type);
+		err = 0;
 		for (i=0; i<argc; i++)
 			{
 			char *tmp,*tofree=NULL;
@@ -376,14 +429,15 @@ int MAIN(int argc, char **argv)
 				}
 			if(!out_bin)
 				{
-				size_t len = strlen(name)+strlen(argv[i])+5;
+				size_t len = strlen(name)+strlen(argv[i])+(hmac_key ? 5 : 0)+5;
 				tmp=tofree=OPENSSL_malloc(len);
-				BIO_snprintf(tmp,len,"%s(%s)= ",name,argv[i]);
+				BIO_snprintf(tmp,len,"%s%s(%s)= ",
+							 hmac_key ? "HMAC-" : "",name,argv[i]);
 				}
 			else
 				tmp="";
 			r=do_fp(out,buf,inp,separator,out_bin,sigkey,sigbuf,
-				siglen,tmp,argv[i]);
+				siglen,tmp,argv[i],bmd,hmac_key,non_fips_allow);
 			if(r)
 			    err=r;
 			if(tofree)
@@ -410,11 +464,23 @@ end:
 
 int do_fp(BIO *out, unsigned char *buf, BIO *bp, int sep, int binout,
 	  EVP_PKEY *key, unsigned char *sigin, int siglen, const char *title,
-	  const char *file)
+	  const char *file,BIO *bmd,const char *hmac_key,int non_fips_allow)
 	{
-	int len;
+	unsigned int len;
 	int i;
+	EVP_MD_CTX *md_ctx;
+	HMAC_CTX hmac_ctx;
 
+	if (hmac_key)
+		{
+		EVP_MD *md;
+
+		BIO_get_md(bmd,&md);
+		HMAC_CTX_init(&hmac_ctx);
+		HMAC_Init_ex(&hmac_ctx,hmac_key,strlen(hmac_key),md, NULL);
+		BIO_get_md_ctx(bmd,&md_ctx);
+		BIO_set_md_ctx(bmd,&hmac_ctx.md_ctx);
+		}
 	for (;;)
 		{
 		i=BIO_read(bp,(char *)buf,BUFSIZE);
@@ -457,6 +523,11 @@ int do_fp(BIO *out, unsigned char *buf, BIO *bp, int sep, int binout,
 			return 1;
 			}
 		}
+	else if(hmac_key)
+		{
+		HMAC_Final(&hmac_ctx,buf,&len);
+		HMAC_CTX_cleanup(&hmac_ctx);
+		}
 	else
 		len=BIO_gets(bp,(char *)buf,BUFSIZE);
 
@@ -464,7 +535,7 @@ int do_fp(BIO *out, unsigned char *buf, BIO *bp, int sep, int binout,
 	else 
 		{
 		BIO_write(out,title,strlen(title));
-		for (i=0; i<len; i++)
+		for (i=0; i<(int)len; i++)
 			{
 			if (sep && (i != 0))
 				BIO_printf(out, ":");
@@ -472,6 +543,10 @@ int do_fp(BIO *out, unsigned char *buf, BIO *bp, int sep, int binout,
 			}
 		BIO_printf(out, "\n");
 		}
+	if (hmac_key)
+		{
+		BIO_set_md_ctx(bmd,md_ctx);
+		}
 	return 0;
 	}
 

apps/dh.c

@@ -57,6 +57,7 @@
  * [including the GNU Public Licence.]
  */
 
+#include <openssl/opensslconf.h>	/* for OPENSSL_NO_DH */
 #ifndef OPENSSL_NO_DH
 #include <stdio.h>
 #include <stdlib.h>

apps/dhparam.c

@@ -109,6 +109,7 @@
  *
  */
 
+#include <openssl/opensslconf.h>	/* for OPENSSL_NO_DH */
 #ifndef OPENSSL_NO_DH
 #include <stdio.h>
 #include <stdlib.h>

apps/dsa.c

@@ -56,6 +56,7 @@
  * [including the GNU Public Licence.]
  */
 
+#include <openssl/opensslconf.h>	/* for OPENSSL_NO_DSA */
 #ifndef OPENSSL_NO_DSA
 #include <stdio.h>
 #include <stdlib.h>
@@ -83,6 +84,10 @@
  * -aes128	- encrypt output if PEM format
  * -aes192	- encrypt output if PEM format
  * -aes256	- encrypt output if PEM format
+ * -camellia128 - encrypt output if PEM format
+ * -camellia192 - encrypt output if PEM format
+ * -camellia256 - encrypt output if PEM format
+ * -seed        - encrypt output if PEM format
  * -text	- print a text version
  * -modulus	- print the DSA public key
  */
@@ -91,9 +96,7 @@ int MAIN(int, char **);
 
 int MAIN(int argc, char **argv)
 	{
-#ifndef OPENSSL_NO_ENGINE
 	ENGINE *e = NULL;
-#endif
 	int ret=1;
 	DSA *dsa=NULL;
 	int i,badops=0;
@@ -210,6 +213,13 @@ bad:
 #ifndef OPENSSL_NO_AES
 		BIO_printf(bio_err," -aes128, -aes192, -aes256\n");
 		BIO_printf(bio_err,"                 encrypt PEM output with cbc aes\n");
+#endif
+#ifndef OPENSSL_NO_CAMELLIA
+		BIO_printf(bio_err," -camellia128, -camellia192, -camellia256\n");
+		BIO_printf(bio_err,"                 encrypt PEM output with cbc camellia\n");
+#endif
+#ifndef OPENSSL_NO_SEED
+		BIO_printf(bio_err," -seed           encrypt PEM output with cbc seed\n");
 #endif
 		BIO_printf(bio_err," -text           print the key in text\n");
 		BIO_printf(bio_err," -noout          don't print key out\n");
@@ -228,37 +238,27 @@ bad:
 		goto end;
 	}
 
-	in=BIO_new(BIO_s_file());
 	out=BIO_new(BIO_s_file());
-	if ((in == NULL) || (out == NULL))
+	if (out == NULL)
 		{
 		ERR_print_errors(bio_err);
 		goto end;
 		}
 
-	if (infile == NULL)
-		BIO_set_fp(in,stdin,BIO_NOCLOSE);
-	else
-		{
-		if (BIO_read_filename(in,infile) <= 0)
-			{
-			perror(infile);
-			goto end;
-			}
-		}
-
 	BIO_printf(bio_err,"read DSA key\n");
-	if	(informat == FORMAT_ASN1) {
-		if(pubin) dsa=d2i_DSA_PUBKEY_bio(in,NULL);
-		else dsa=d2i_DSAPrivateKey_bio(in,NULL);
-	} else if (informat == FORMAT_PEM) {
-		if(pubin) dsa=PEM_read_bio_DSA_PUBKEY(in,NULL, NULL, NULL);
-		else dsa=PEM_read_bio_DSAPrivateKey(in,NULL,NULL,passin);
-	} else
-		{
-		BIO_printf(bio_err,"bad input format specified for key\n");
-		goto end;
-		}
+	{
+		EVP_PKEY	*pkey;
+		if (pubin)
+			pkey = load_pubkey(bio_err, infile, informat, 1,
+				passin, e, "Public Key");
+		else
+			pkey = load_key(bio_err, infile, informat, 1,
+				passin, e, "Private Key");
+
+		if (pkey != NULL)
+		dsa = pkey == NULL ? NULL : EVP_PKEY_get1_DSA(pkey);
+		EVP_PKEY_free(pkey);
+	}
 	if (dsa == NULL)
 		{
 		BIO_printf(bio_err,"unable to load Key\n");

apps/dsaparam.c

@@ -56,6 +56,7 @@
  * [including the GNU Public Licence.]
  */
 
+#include <openssl/opensslconf.h>	/* for OPENSSL_NO_DSA */
 /* Until the key-gen callbacks are modified to use newer prototypes, we allow
  * deprecated functions for openssl-internal code */
 #ifdef OPENSSL_NO_DEPRECATED

apps/ec.c

@@ -3,7 +3,7 @@
  * Written by Nils Larsch for the OpenSSL project.
  */
 /* ====================================================================
- * Copyright (c) 1998-2002 The OpenSSL Project.  All rights reserved.
+ * Copyright (c) 1998-2005 The OpenSSL Project.  All rights reserved.
  *
  * Redistribution and use in source and binary forms, with or without
  * modification, are permitted provided that the following conditions
@@ -56,6 +56,7 @@
  *
  */
 
+#include <openssl/opensslconf.h>
 #ifndef OPENSSL_NO_EC
 #include <stdio.h>
 #include <stdlib.h>
@@ -89,6 +90,7 @@ int MAIN(int argc, char **argv)
 #endif
 	int 	ret = 1;
 	EC_KEY 	*eckey = NULL;
+	const EC_GROUP *group;
 	int 	i, badops = 0;
 	const EVP_CIPHER *enc = NULL;
 	BIO 	*in = NULL, *out = NULL;
@@ -242,7 +244,7 @@ bad:
 				" the ec parameters are encoded\n");
 		BIO_printf(bio_err, "                 in the asn1 der "
 				"encoding\n");
-		BIO_printf(bio_err, "                 possilbe values:"
+		BIO_printf(bio_err, "                 possible values:"
 				" named_curve (default)\n");
 		BIO_printf(bio_err,"                                  "
 				"explicit\n");
@@ -328,14 +330,13 @@ bad:
 			}
 		}
 
+	group = EC_KEY_get0_group(eckey);
+
 	if (new_form)
-		{
-		EC_GROUP_set_point_conversion_form(eckey->group, form);
-		eckey->conv_form = form;
-		}
+		EC_KEY_set_conv_form(eckey, form);
 
 	if (new_asn1_flag)
-		EC_GROUP_set_asn1_flag(eckey->group, asn1_flag);
+		EC_KEY_set_asn1_flag(eckey, asn1_flag);
 
 	if (text) 
 		if (!EC_KEY_print(out, eckey, 0))
@@ -346,13 +347,16 @@ bad:
 			}
 
 	if (noout) 
+		{
+		ret = 0;
 		goto end;
+		}
 
 	BIO_printf(bio_err, "writing EC key\n");
 	if (outformat == FORMAT_ASN1) 
 		{
 		if (param_out)
-			i = i2d_ECPKParameters_bio(out, eckey->group);
+			i = i2d_ECPKParameters_bio(out, group);
 		else if (pubin || pubout) 
 			i = i2d_EC_PUBKEY_bio(out, eckey);
 		else 
@@ -361,7 +365,7 @@ bad:
 	else if (outformat == FORMAT_PEM) 
 		{
 		if (param_out)
-			i = PEM_write_bio_ECPKParameters(out, eckey->group);
+			i = PEM_write_bio_ECPKParameters(out, group);
 		else if (pubin || pubout)
 			i = PEM_write_bio_EC_PUBKEY(out, eckey);
 		else 

apps/ecparam.c

@@ -3,7 +3,7 @@
  * Written by Nils Larsch for the OpenSSL project.
  */
 /* ====================================================================
- * Copyright (c) 1998-2002 The OpenSSL Project.  All rights reserved.
+ * Copyright (c) 1998-2005 The OpenSSL Project.  All rights reserved.
  *
  * Redistribution and use in source and binary forms, with or without
  * modification, are permitted provided that the following conditions
@@ -68,6 +68,8 @@
  * Sheueling Chang Shantz and Douglas Stebila of Sun Microsystems Laboratories.
  *
  */
+
+#include <openssl/opensslconf.h>
 #ifndef OPENSSL_NO_EC
 #include <assert.h>
 #include <stdio.h>
@@ -411,7 +413,7 @@ bad:
 			goto end;
 			}
 
-		group = EC_GROUP_new_by_nid(nid);
+		group = EC_GROUP_new_by_curve_name(nid);
 		if (group == NULL)
 			{
 			BIO_printf(bio_err, "unable to create curve (%s)\n", 
@@ -647,11 +649,11 @@ bad:
 
 		assert(need_rand);
 
-		eckey->group = group;
+		if (EC_KEY_set_group(eckey, group) == 0)
+			goto end;
 		
 		if (!EC_KEY_generate_key(eckey))
 			{
-			eckey->group = NULL;
 			EC_KEY_free(eckey);
 			goto end;
 			}
@@ -664,11 +666,9 @@ bad:
 			{
 			BIO_printf(bio_err, "bad output format specified "
 				"for outfile\n");
-			eckey->group = NULL;
 			EC_KEY_free(eckey);
 			goto end;
 			}
-		eckey->group = NULL;
 		EC_KEY_free(eckey);
 		}
 

apps/enc.c

@@ -127,6 +127,7 @@ int MAIN(int argc, char **argv)
 	char *engine = NULL;
 #endif
 	const EVP_MD *dgst=NULL;
+	int non_fips_allow = 0;
 
 	apps_startup();
 
@@ -261,6 +262,8 @@ int MAIN(int argc, char **argv)
 			if (--argc < 1) goto bad;
 			md= *(++argv);
 			}
+		else if (strcmp(*argv,"-non-fips-allow") == 0)
+			non_fips_allow = 1;
 		else if	((argv[0][0] == '-') &&
 			((c=EVP_get_cipherbyname(&(argv[0][1]))) != NULL))
 			{
@@ -314,7 +317,10 @@ bad:
 
 	if (dgst == NULL)
 		{
-		dgst = EVP_md5();
+		if (in_FIPS_mode)
+			dgst = EVP_sha1();
+		else
+			dgst = EVP_md5();
 		}
 
 	if (bufsize != NULL)
@@ -340,7 +346,7 @@ bad:
 			}
 
 		/* It must be large enough for a base64 encoded line */
-		if (n < 80) n=80;
+		if (base64 && n < 80) n=80;
 
 		bsize=(int)n;
 		if (verbose) BIO_printf(bio_err,"bufsize=%d\n",bsize);
@@ -365,12 +371,16 @@ bad:
 		{
 		BIO_set_callback(in,BIO_debug_callback);
 		BIO_set_callback(out,BIO_debug_callback);
-		BIO_set_callback_arg(in,bio_err);
-		BIO_set_callback_arg(out,bio_err);
+		BIO_set_callback_arg(in,(char *)bio_err);
+		BIO_set_callback_arg(out,(char *)bio_err);
 		}
 
 	if (inf == NULL)
+	        {
+		if (bufsize != NULL)
+			setvbuf(stdin, (char *)NULL, _IONBF, 0);
 		BIO_set_fp(in,stdin,BIO_NOCLOSE);
+	        }
 	else
 		{
 		if (BIO_read_filename(in,inf) <= 0)
@@ -421,6 +431,8 @@ bad:
 	if (outf == NULL)
 		{
 		BIO_set_fp(out,stdout,BIO_NOCLOSE);
+		if (bufsize != NULL)
+			setvbuf(stdout, (char *)NULL, _IONBF, 0);
 #ifdef OPENSSL_SYS_VMS
 		{
 		BIO *tmpbio = BIO_new(BIO_f_linebuffer());
@@ -447,7 +459,7 @@ bad:
 		if (debug)
 			{
 			BIO_set_callback(b64,BIO_debug_callback);
-			BIO_set_callback_arg(b64,bio_err);
+			BIO_set_callback_arg(b64,(char *)bio_err);
 			}
 		if (olb64)
 			BIO_set_flags(b64,BIO_FLAGS_BASE64_NO_NL);
@@ -521,7 +533,8 @@ bad:
 			BIO_printf(bio_err,"invalid hex iv value\n");
 			goto end;
 			}
-		if ((hiv == NULL) && (str == NULL))
+		if ((hiv == NULL) && (str == NULL)
+		    && EVP_CIPHER_iv_length(cipher) != 0)
 			{
 			/* No IV was explicitly set and no IV was generated
 			 * during EVP_BytesToKey. Hence the IV is undefined,
@@ -543,6 +556,11 @@ bad:
 		 */
 
 		BIO_get_cipher_ctx(benc, &ctx);
+
+		if (non_fips_allow)
+			EVP_CIPHER_CTX_set_flags(ctx,
+				EVP_CIPH_FLAG_NON_FIPS_ALLOW);
+
 		if (!EVP_CipherInit_ex(ctx, cipher, NULL, NULL, NULL, enc))
 			{
 			BIO_printf(bio_err, "Error setting cipher %s\n",
@@ -565,7 +583,7 @@ bad:
 		if (debug)
 			{
 			BIO_set_callback(benc,BIO_debug_callback);
-			BIO_set_callback_arg(benc,bio_err);
+			BIO_set_callback_arg(benc,(char *)bio_err);
 			}
 
 		if (printkey)

apps/engine.c

@@ -56,7 +56,6 @@
  *
  */
 
-#ifndef OPENSSL_NO_ENGINE
 
 #include <stdio.h>
 #include <stdlib.h>
@@ -66,6 +65,7 @@
 #endif
 #include "apps.h"
 #include <openssl/err.h>
+#ifndef OPENSSL_NO_ENGINE
 #include <openssl/engine.h>
 #include <openssl/ssl.h>
 
@@ -252,7 +252,7 @@ static int util_verbose(ENGINE *e, int verbose, BIO *bio_out, const char *indent
                         /* Now decide on the output */
                         if(xpos == 0)
                                 /* Do an indent */
-                                xpos = BIO_printf(bio_out, indent);
+                                xpos = BIO_puts(bio_out, indent);
                         else
                                 /* Otherwise prepend a ", " */
                                 xpos += BIO_printf(bio_out, ", ");
@@ -263,7 +263,7 @@ static int util_verbose(ENGINE *e, int verbose, BIO *bio_out, const char *indent
 					(xpos + (int)strlen(name) > line_wrap))
                                         {
                                         BIO_printf(bio_out, "\n");
-                                        xpos = BIO_printf(bio_out, indent);
+                                        xpos = BIO_puts(bio_out, indent);
                                         }
                                 xpos += BIO_printf(bio_out, "%s", name);
                                 }
@@ -394,11 +394,15 @@ int MAIN(int argc, char **argv)
 		else if (strcmp(*argv,"-pre") == 0)
 			{
 			argc--; argv++;
+			if (argc == 0)
+				goto skip_arg_loop;
 			sk_push(pre_cmds,*argv);
 			}
 		else if (strcmp(*argv,"-post") == 0)
 			{
 			argc--; argv++;
+			if (argc == 0)
+				goto skip_arg_loop;
 			sk_push(post_cmds,*argv);
 			}
 		else if ((strncmp(*argv,"-h",2) == 0) ||

apps/gendh.c

@@ -57,6 +57,7 @@
  * [including the GNU Public Licence.]
  */
 
+#include <openssl/opensslconf.h>
 /* Until the key-gen callbacks are modified to use newer prototypes, we allow
  * deprecated functions for openssl-internal code */
 #ifdef OPENSSL_NO_DEPRECATED

apps/gendsa.c

@@ -56,6 +56,7 @@
  * [including the GNU Public Licence.]
  */
 
+#include <openssl/opensslconf.h>	/* for OPENSSL_NO_DSA */
 #ifndef OPENSSL_NO_DSA
 #include <stdio.h>
 #include <string.h>
@@ -139,6 +140,10 @@ int MAIN(int argc, char **argv)
 		else if (strcmp(*argv,"-idea") == 0)
 			enc=EVP_idea_cbc();
 #endif
+#ifndef OPENSSL_NO_SEED
+		else if (strcmp(*argv,"-seed") == 0)
+			enc=EVP_seed_cbc();
+#endif
 #ifndef OPENSSL_NO_AES
 		else if (strcmp(*argv,"-aes128") == 0)
 			enc=EVP_aes_128_cbc();
@@ -146,6 +151,14 @@ int MAIN(int argc, char **argv)
 			enc=EVP_aes_192_cbc();
 		else if (strcmp(*argv,"-aes256") == 0)
 			enc=EVP_aes_256_cbc();
+#endif
+#ifndef OPENSSL_NO_CAMELLIA
+		else if (strcmp(*argv,"-camellia128") == 0)
+			enc=EVP_camellia_128_cbc();
+		else if (strcmp(*argv,"-camellia192") == 0)
+			enc=EVP_camellia_192_cbc();
+		else if (strcmp(*argv,"-camellia256") == 0)
+			enc=EVP_camellia_256_cbc();
 #endif
 		else if (**argv != '-' && dsaparams == NULL)
 			{
@@ -169,10 +182,18 @@ bad:
 #ifndef OPENSSL_NO_IDEA
 		BIO_printf(bio_err," -idea     - encrypt the generated key with IDEA in cbc mode\n");
 #endif
+#ifndef OPENSSL_NO_SEED
+		BIO_printf(bio_err," -seed\n");
+		BIO_printf(bio_err,"                 encrypt PEM output with cbc seed\n");
+#endif
 #ifndef OPENSSL_NO_AES
 		BIO_printf(bio_err," -aes128, -aes192, -aes256\n");
 		BIO_printf(bio_err,"                 encrypt PEM output with cbc aes\n");
 #endif
+#ifndef OPENSSL_NO_CAMELLIA
+		BIO_printf(bio_err," -camellia128, -camellia192, -camellia256\n");
+		BIO_printf(bio_err,"                 encrypt PEM output with cbc camellia\n");
+#endif
 #ifndef OPENSSL_NO_ENGINE
 		BIO_printf(bio_err," -engine e - use engine e, possibly a hardware device.\n");
 #endif

apps/genpkey.c

@@ -0,0 +1,440 @@
+/* apps/genpkey.c */
+/* Written by Dr Stephen N Henson (steve@openssl.org) for the OpenSSL
+ * project 2006
+ */
+/* ====================================================================
+ * Copyright (c) 2006 The OpenSSL Project.  All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer. 
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ *
+ * 3. All advertising materials mentioning features or use of this
+ *    software must display the following acknowledgment:
+ *    "This product includes software developed by the OpenSSL Project
+ *    for use in the OpenSSL Toolkit. (http://www.OpenSSL.org/)"
+ *
+ * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
+ *    endorse or promote products derived from this software without
+ *    prior written permission. For written permission, please contact
+ *    licensing@OpenSSL.org.
+ *
+ * 5. Products derived from this software may not be called "OpenSSL"
+ *    nor may "OpenSSL" appear in their names without prior written
+ *    permission of the OpenSSL Project.
+ *
+ * 6. Redistributions of any form whatsoever must retain the following
+ *    acknowledgment:
+ *    "This product includes software developed by the OpenSSL Project
+ *    for use in the OpenSSL Toolkit (http://www.OpenSSL.org/)"
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
+ * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
+ * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE OpenSSL PROJECT OR
+ * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
+ * OF THE POSSIBILITY OF SUCH DAMAGE.
+ * ====================================================================
+ *
+ * This product includes cryptographic software written by Eric Young
+ * (eay@cryptsoft.com).  This product includes software written by Tim
+ * Hudson (tjh@cryptsoft.com).
+ *
+ */
+#include <stdio.h>
+#include <string.h>
+#include "apps.h"
+#include <openssl/pem.h>
+#include <openssl/err.h>
+#include <openssl/evp.h>
+#ifndef OPENSSL_NO_ENGINE
+#include <openssl/engine.h>
+#endif
+
+static int init_keygen_file(BIO *err, EVP_PKEY_CTX **pctx,
+				const char *file, ENGINE *e);
+static int genpkey_cb(EVP_PKEY_CTX *ctx);
+
+#define PROG genpkey_main
+
+int MAIN(int, char **);
+
+int MAIN(int argc, char **argv)
+	{
+	ENGINE *e = NULL;
+	char **args, *outfile = NULL;
+	char *passarg = NULL;
+	BIO *in = NULL, *out = NULL;
+	const EVP_CIPHER *cipher = NULL;
+	int outformat;
+	int text = 0;
+	EVP_PKEY *pkey=NULL;
+	EVP_PKEY_CTX *ctx = NULL;
+	char *pass = NULL;
+	int badarg = 0;
+	int ret = 1, rv;
+
+	int do_param = 0;
+
+	if (bio_err == NULL)
+		bio_err = BIO_new_fp (stderr, BIO_NOCLOSE);
+
+	if (!load_config(bio_err, NULL))
+		goto end;
+
+	outformat=FORMAT_PEM;
+
+	ERR_load_crypto_strings();
+	OpenSSL_add_all_algorithms();
+	args = argv + 1;
+	while (!badarg && *args && *args[0] == '-')
+		{
+		if (!strcmp(*args,"-outform"))
+			{
+			if (args[1])
+				{
+				args++;
+				outformat=str2fmt(*args);
+				}
+			else badarg = 1;
+			}
+		else if (!strcmp(*args,"-pass"))
+			{
+			if (!args[1]) goto bad;
+			passarg= *(++args);
+			}
+#ifndef OPENSSL_NO_ENGINE
+		else if (strcmp(*args,"-engine") == 0)
+			{
+			if (!args[1])
+				goto bad;
+        		e = setup_engine(bio_err, *(++args), 0);
+			}
+#endif
+		else if (!strcmp (*args, "-paramfile"))
+			{
+			if (!args[1])
+				goto bad;
+			args++;
+			if (do_param == 1)
+				goto bad;
+			if (!init_keygen_file(bio_err, &ctx, *args, e))
+				goto end;
+			}
+		else if (!strcmp (*args, "-out"))
+			{
+			if (args[1])
+				{
+				args++;
+				outfile = *args;
+				}
+			else badarg = 1;
+			}
+		else if (strcmp(*args,"-algorithm") == 0)
+			{
+			if (!args[1])
+				goto bad;
+			if (!init_gen_str(bio_err, &ctx, *(++args),e, do_param))
+				goto end;
+			}
+		else if (strcmp(*args,"-pkeyopt") == 0)
+			{
+			if (!args[1])
+				goto bad;
+			if (!ctx)
+				{
+				BIO_puts(bio_err, "No keytype specified\n");
+				goto bad;
+				}
+			else if (pkey_ctrl_string(ctx, *(++args)) <= 0)
+				{
+				BIO_puts(bio_err, "parameter setting error\n");
+				ERR_print_errors(bio_err);
+				goto end;
+				}
+			}
+		else if (strcmp(*args,"-genparam") == 0)
+			{
+			if (ctx)
+				goto bad;
+			do_param = 1;
+			}
+		else if (strcmp(*args,"-text") == 0)
+			text=1;
+		else
+			{
+			cipher = EVP_get_cipherbyname(*args + 1);
+			if (!cipher)
+				{
+				BIO_printf(bio_err, "Unknown cipher %s\n",
+								*args + 1);
+				badarg = 1;
+				}
+			if (do_param == 1)
+				badarg = 1;
+			}
+		args++;
+		}
+
+	if (!ctx)
+		badarg = 1;
+
+	if (badarg)
+		{
+		bad:
+		BIO_printf(bio_err, "Usage: genpkey [options]\n");
+		BIO_printf(bio_err, "where options may be\n");
+		BIO_printf(bio_err, "-out file          output file\n");
+		BIO_printf(bio_err, "-outform X         output format (DER or PEM)\n");
+		BIO_printf(bio_err, "-pass arg          output file pass phrase source\n");
+		BIO_printf(bio_err, "-<cipher>          use cipher <cipher> to encrypt the key\n");
+#ifndef OPENSSL_NO_ENGINE
+		BIO_printf(bio_err, "-engine e          use engine e, possibly a hardware device.\n");
+#endif
+		BIO_printf(bio_err, "-paramfile file    parameters file\n");
+		BIO_printf(bio_err, "-algorithm alg     the public key algorithm\n");
+		BIO_printf(bio_err, "-pkeyopt opt:value set the public key algorithm option <opt>\n"
+				            "                   to value <value>\n");
+		BIO_printf(bio_err, "-genparam          generate parameters, not key\n");
+		BIO_printf(bio_err, "-text              print the in text\n");
+		BIO_printf(bio_err, "NB: options order may be important!  See the manual page.\n");
+		goto end;
+		}
+
+	if (!app_passwd(bio_err, passarg, NULL, &pass, NULL))
+		{
+		BIO_puts(bio_err, "Error getting password\n");
+		goto end;
+		}
+
+	if (outfile)
+		{
+		if (!(out = BIO_new_file (outfile, "wb")))
+			{
+			BIO_printf(bio_err,
+				 "Can't open output file %s\n", outfile);
+			goto end;
+			}
+		}
+	else
+		{
+		out = BIO_new_fp (stdout, BIO_NOCLOSE);
+#ifdef OPENSSL_SYS_VMS
+			{
+			BIO *tmpbio = BIO_new(BIO_f_linebuffer());
+			out = BIO_push(tmpbio, out);
+			}
+#endif
+		}
+
+	EVP_PKEY_CTX_set_cb(ctx, genpkey_cb);
+	EVP_PKEY_CTX_set_app_data(ctx, bio_err);
+
+	if (do_param)
+		{
+		if (EVP_PKEY_paramgen(ctx, &pkey) <= 0)
+			{
+			BIO_puts(bio_err, "Error generating parameters\n");
+			ERR_print_errors(bio_err);
+			goto end;
+			}
+		}
+	else
+		{
+		if (EVP_PKEY_keygen(ctx, &pkey) <= 0)
+			{
+			BIO_puts(bio_err, "Error generating key\n");
+			ERR_print_errors(bio_err);
+			goto end;
+			}
+		}
+
+	if (do_param)
+		rv = PEM_write_bio_Parameters(out, pkey);
+	else if (outformat == FORMAT_PEM) 
+		rv = PEM_write_bio_PrivateKey(out, pkey, cipher, NULL, 0,
+								NULL, pass);
+	else if (outformat == FORMAT_ASN1)
+		rv = i2d_PrivateKey_bio(out, pkey);
+	else
+		{
+		BIO_printf(bio_err, "Bad format specified for key\n");
+		goto end;
+		}
+
+	if (rv <= 0)
+		{
+		BIO_puts(bio_err, "Error writing key\n");
+		ERR_print_errors(bio_err);
+		}
+
+	if (text)
+		{
+		if (do_param)
+			rv = EVP_PKEY_print_params(out, pkey, 0, NULL);
+		else
+			rv = EVP_PKEY_print_private(out, pkey, 0, NULL);
+
+		if (rv <= 0)
+			{
+			BIO_puts(bio_err, "Error printing key\n");
+			ERR_print_errors(bio_err);
+			}
+		}
+
+	ret = 0;
+
+	end:
+	if (pkey)
+		EVP_PKEY_free(pkey);
+	if (ctx)
+		EVP_PKEY_CTX_free(ctx);
+	if (out)
+		BIO_free_all(out);
+	BIO_free(in);
+	if (pass)
+		OPENSSL_free(pass);
+
+	return ret;
+	}
+
+static int init_keygen_file(BIO *err, EVP_PKEY_CTX **pctx,
+				const char *file, ENGINE *e)
+	{
+	BIO *pbio;
+	EVP_PKEY *pkey = NULL;
+	EVP_PKEY_CTX *ctx = NULL;
+	if (*pctx)
+		{
+		BIO_puts(err, "Parameters already set!\n");
+		return 0;
+		}
+
+	pbio = BIO_new_file(file, "r");
+	if (!pbio)
+		{
+		BIO_printf(err, "Can't open parameter file %s\n", file);
+		return 0;
+		}
+
+	pkey = PEM_read_bio_Parameters(pbio, NULL);
+	BIO_free(pbio);
+
+	if (!pkey)
+		{
+		BIO_printf(bio_err, "Error reading parameter file %s\n", file);
+		return 0;
+		}
+
+	ctx = EVP_PKEY_CTX_new(pkey, e);
+	if (!ctx)
+		goto err;
+	if (EVP_PKEY_keygen_init(ctx) <= 0)
+		goto err;
+	EVP_PKEY_free(pkey);
+	*pctx = ctx;
+	return 1;
+
+	err:
+	BIO_puts(err, "Error initializing context\n");
+	ERR_print_errors(err);
+	if (ctx)
+		EVP_PKEY_CTX_free(ctx);
+	if (pkey)
+		EVP_PKEY_free(pkey);
+	return 0;
+
+	}
+
+int init_gen_str(BIO *err, EVP_PKEY_CTX **pctx,
+			const char *algname, ENGINE *e, int do_param)
+	{
+	EVP_PKEY_CTX *ctx = NULL;
+	const EVP_PKEY_ASN1_METHOD *ameth;
+	ENGINE *tmpeng = NULL;
+	int pkey_id;
+
+	if (*pctx)
+		{
+		BIO_puts(err, "Algorithm already set!\n");
+		return 0;
+		}
+
+	ameth = EVP_PKEY_asn1_find_str(&tmpeng, algname, -1);
+
+#ifndef OPENSSL_NO_ENGINE
+	if (!ameth && e)
+		ameth = ENGINE_get_pkey_asn1_meth_str(e, algname, -1);
+#endif
+
+	if (!ameth)
+		{
+		BIO_printf(bio_err, "Algorithm %s not found\n", algname);
+		return 0;
+		}
+
+	ERR_clear_error();
+
+	EVP_PKEY_asn1_get0_info(&pkey_id, NULL, NULL, NULL, NULL, ameth);
+#ifndef OPENSSL_NO_ENGINE
+	if (tmpeng)
+		ENGINE_finish(tmpeng);
+#endif
+	ctx = EVP_PKEY_CTX_new_id(pkey_id, e);
+
+	if (!ctx)
+		goto err;
+	if (do_param)
+		{
+		if (EVP_PKEY_paramgen_init(ctx) <= 0)
+			goto err;
+		}
+	else
+		{
+		if (EVP_PKEY_keygen_init(ctx) <= 0)
+			goto err;
+		}
+
+	*pctx = ctx;
+	return 1;
+
+	err:
+	BIO_printf(err, "Error initializing %s context\n", algname);
+	ERR_print_errors(err);
+	if (ctx)
+		EVP_PKEY_CTX_free(ctx);
+	return 0;
+
+	}
+
+static int genpkey_cb(EVP_PKEY_CTX *ctx)
+	{
+	char c='*';
+	BIO *b = EVP_PKEY_CTX_get_app_data(ctx);
+	int p;
+	p = EVP_PKEY_CTX_get_keygen_info(ctx, 0);
+	if (p == 0) c='.';
+	if (p == 1) c='+';
+	if (p == 2) c='*';
+	if (p == 3) c='\n';
+	BIO_write(b,&c,1);
+	(void)BIO_flush(b);
+#ifdef LINT
+	p=n;
+#endif
+	return 1;
+	}

apps/genrsa.c

@@ -56,6 +56,7 @@
  * [including the GNU Public Licence.]
  */
 
+#include <openssl/opensslconf.h>
 /* Until the key-gen callbacks are modified to use newer prototypes, we allow
  * deprecated functions for openssl-internal code */
 #ifdef OPENSSL_NO_DEPRECATED
@@ -94,6 +95,7 @@ int MAIN(int argc, char **argv)
 	int ret=1;
 	int i,num=DEFBITS;
 	long l;
+	int use_x931 = 0;
 	const EVP_CIPHER *enc=NULL;
 	unsigned long f4=RSA_F4;
 	char *outfile=NULL;
@@ -137,6 +139,8 @@ int MAIN(int argc, char **argv)
 			f4=3;
 		else if (strcmp(*argv,"-F4") == 0 || strcmp(*argv,"-f4") == 0)
 			f4=RSA_F4;
+		else if (strcmp(*argv,"-x931") == 0)
+			use_x931 = 1;
 #ifndef OPENSSL_NO_ENGINE
 		else if (strcmp(*argv,"-engine") == 0)
 			{
@@ -159,6 +163,10 @@ int MAIN(int argc, char **argv)
 		else if (strcmp(*argv,"-idea") == 0)
 			enc=EVP_idea_cbc();
 #endif
+#ifndef OPENSSL_NO_SEED
+		else if (strcmp(*argv,"-seed") == 0)
+			enc=EVP_seed_cbc();
+#endif
 #ifndef OPENSSL_NO_AES
 		else if (strcmp(*argv,"-aes128") == 0)
 			enc=EVP_aes_128_cbc();
@@ -166,6 +174,14 @@ int MAIN(int argc, char **argv)
 			enc=EVP_aes_192_cbc();
 		else if (strcmp(*argv,"-aes256") == 0)
 			enc=EVP_aes_256_cbc();
+#endif
+#ifndef OPENSSL_NO_CAMELLIA
+		else if (strcmp(*argv,"-camellia128") == 0)
+			enc=EVP_camellia_128_cbc();
+		else if (strcmp(*argv,"-camellia192") == 0)
+			enc=EVP_camellia_192_cbc();
+		else if (strcmp(*argv,"-camellia256") == 0)
+			enc=EVP_camellia_256_cbc();
 #endif
 		else if (strcmp(*argv,"-passout") == 0)
 			{
@@ -186,9 +202,17 @@ bad:
 #ifndef OPENSSL_NO_IDEA
 		BIO_printf(bio_err," -idea           encrypt the generated key with IDEA in cbc mode\n");
 #endif
+#ifndef OPENSSL_NO_SEED
+		BIO_printf(bio_err," -seed\n");
+		BIO_printf(bio_err,"                 encrypt PEM output with cbc seed\n");
+#endif
 #ifndef OPENSSL_NO_AES
 		BIO_printf(bio_err," -aes128, -aes192, -aes256\n");
 		BIO_printf(bio_err,"                 encrypt PEM output with cbc aes\n");
+#endif
+#ifndef OPENSSL_NO_CAMELLIA
+		BIO_printf(bio_err," -camellia128, -camellia192, -camellia256\n");
+		BIO_printf(bio_err,"                 encrypt PEM output with cbc camellia\n");
 #endif
 		BIO_printf(bio_err," -out file       output the key to 'file\n");
 		BIO_printf(bio_err," -passout arg    output file pass phrase source\n");
@@ -245,7 +269,17 @@ bad:
 	BIO_printf(bio_err,"Generating RSA private key, %d bit long modulus\n",
 		num);
 
-	if(!BN_set_word(bn, f4) || !RSA_generate_key_ex(rsa, num, bn, &cb))
+	if (use_x931)
+		{
+		BIGNUM *pubexp;
+		pubexp = BN_new();
+		if (!BN_set_word(pubexp, f4))
+			goto err;
+		if (!RSA_X931_generate_key_ex(rsa, num, pubexp, &cb))
+			goto err;
+		BN_free(pubexp);
+		}
+	else if(!BN_set_word(bn, f4) || !RSA_generate_key_ex(rsa, num, bn, &cb))
 		goto err;
 		
 	app_RAND_write_file(NULL, bio_err);

apps/makeapps.com

@@ -143,26 +143,9 @@ $ LIB_FILES = "VERIFY;ASN1PARS;REQ;DGST;DH;DHPARAM;ENC;PASSWD;GENDH;ERRSTR;"+-
 	      "X509;GENRSA;GENDSA;S_SERVER;S_CLIENT;SPEED;"+-
 	      "S_TIME;APPS;S_CB;S_SOCKET;APP_RAND;VERSION;SESS_ID;"+-
 	      "CIPHERS;NSEQ;PKCS12;PKCS8;SPKAC;SMIME;RAND;ENGINE;OCSP;PRIME"
-$ APP_FILES := OPENSSL,'OBJ_DIR'VERIFY.OBJ,ASN1PARS.OBJ,REQ.OBJ,DGST.OBJ,DH.OBJ,DHPARAM.OBJ,ENC.OBJ,PASSWD.OBJ,GENDH.OBJ,ERRSTR.OBJ,-
-	       CA.OBJ,PKCS7.OBJ,CRL2P7.OBJ,CRL.OBJ,-
-	       RSA.OBJ,RSAUTL.OBJ,DSA.OBJ,DSAPARAM.OBJ,EC.OBJ,ECPARAM.OBJ,-
-	       X509.OBJ,GENRSA.OBJ,GENDSA.OBJ,S_SERVER.OBJ,S_CLIENT.OBJ,SPEED.OBJ,-
-	       S_TIME.OBJ,APPS.OBJ,S_CB.OBJ,S_SOCKET.OBJ,APP_RAND.OBJ,VERSION.OBJ,SESS_ID.OBJ,-
-	       CIPHERS.OBJ,NSEQ.OBJ,PKCS12.OBJ,PKCS8.OBJ,SPKAC.OBJ,SMIME.OBJ,RAND.OBJ,ENGINE.OBJ,OCSP.OBJ,PRIME.OBJ
 $ TCPIP_PROGRAMS = ",,"
 $ IF COMPILER .EQS. "VAXC" THEN -
      TCPIP_PROGRAMS = ",OPENSSL,"
-$!$ APP_FILES := VERIFY;ASN1PARS;REQ;DGST;DH;ENC;GENDH;ERRSTR;CA;-
-$!	       PKCS7;CRL2P7;CRL;-
-$!	       RSA;DSA;DSAPARAM;-
-$!	       X509;GENRSA;GENDSA;-
-$!	       S_SERVER,'OBJ_DIR'S_SOCKET.OBJ,'OBJ_DIR'S_CB.OBJ;-
-$!	       S_CLIENT,'OBJ_DIR'S_SOCKET.OBJ,'OBJ_DIR'S_CB.OBJ;-
-$!	       SPEED;-
-$!	       S_TIME,'OBJ_DIR'S_CB.OBJ;VERSION;SESS_ID;CIPHERS;NSEQ
-$!$ TCPIP_PROGRAMS = ",,"
-$!$ IF COMPILER .EQS. "VAXC" THEN -
-$!     TCPIP_PROGRAMS = ",S_SERVER,S_CLIENT,SESS_ID,CIPHERS,S_TIME,"
 $!
 $! Setup exceptional compilations
 $!
@@ -650,7 +633,7 @@ $ CCDEFS = "MONOLITH"
 $ IF F$TYPE(USER_CCDEFS) .NES. "" THEN CCDEFS = CCDEFS + "," + USER_CCDEFS
 $ CCEXTRAFLAGS = ""
 $ IF F$TYPE(USER_CCFLAGS) .NES. "" THEN CCEXTRAFLAGS = USER_CCFLAGS
-$ CCDISABLEWARNINGS = "LONGLONGTYPE,LONGLONGSUFX"
+$ CCDISABLEWARNINGS = "LONGLONGTYPE,LONGLONGSUFX,FOUNDCR"
 $ IF F$TYPE(USER_CCDISABLEWARNINGS) .NES. "" THEN -
 	CCDISABLEWARNINGS = CCDISABLEWARNINGS + "," + USER_CCDISABLEWARNINGS
 $!

apps/nseq.c

@@ -1,5 +1,5 @@
 /* nseq.c */
-/* Written by Dr Stephen N Henson (shenson@bigfoot.com) for the OpenSSL
+/* Written by Dr Stephen N Henson (steve@openssl.org) for the OpenSSL
  * project 1999.
  */
 /* ====================================================================

apps/ocsp.c

@@ -1,5 +1,5 @@
 /* ocsp.c */
-/* Written by Dr Stephen N Henson (shenson@bigfoot.com) for the OpenSSL
+/* Written by Dr Stephen N Henson (steve@openssl.org) for the OpenSSL
  * project 2000.
  */
 /* ====================================================================
@@ -56,15 +56,14 @@
  *
  */
 #ifndef OPENSSL_NO_OCSP
-
+#define USE_SOCKETS
 #include <stdio.h>
+#include <stdlib.h>
 #include <string.h>
-#include "apps.h"
-#include <openssl/pem.h>
-#include <openssl/ocsp.h>
-#include <openssl/err.h>
+#include "apps.h" /* needs to be included before the openssl headers! */
+#include <openssl/e_os2.h>
 #include <openssl/ssl.h>
-#include <openssl/bn.h>
+#include <openssl/err.h>
 
 /* Maximum leeway in validity period: default 5 minutes */
 #define MAX_VALIDITY_PERIOD	(5 * 60)
@@ -86,6 +85,8 @@ static char **lookup_serial(CA_DB *db, ASN1_INTEGER *ser);
 static BIO *init_responder(char *port);
 static int do_responder(OCSP_REQUEST **preq, BIO **pcbio, BIO *acbio, char *port);
 static int send_ocsp_response(BIO *cbio, OCSP_RESPONSE *resp);
+static OCSP_RESPONSE *query_responder(BIO *err, BIO *cbio, char *path,
+				OCSP_REQUEST *req, int req_timeout);
 
 #undef PROG
 #define PROG ocsp_main
@@ -112,11 +113,11 @@ int MAIN(int argc, char **argv)
 	BIO *acbio = NULL, *cbio = NULL;
 	BIO *derbio = NULL;
 	BIO *out = NULL;
+	int req_timeout = -1;
 	int req_text = 0, resp_text = 0;
 	long nsec = MAX_VALIDITY_PERIOD, maxage = -1;
 	char *CAfile = NULL, *CApath = NULL;
 	X509_STORE *store = NULL;
-	SSL_CTX *ctx = NULL;
 	STACK_OF(X509) *sign_other = NULL, *verify_other = NULL, *rother = NULL;
 	char *sign_certfile = NULL, *verify_certfile = NULL, *rcertfile = NULL;
 	unsigned long sign_flags = 0, verify_flags = 0, rflags = 0;
@@ -139,6 +140,7 @@ int MAIN(int argc, char **argv)
 	if (!load_config(bio_err, NULL))
 		goto end;
 	SSL_load_error_strings();
+	OpenSSL_add_ssl_algorithms();
 	args = argv + 1;
 	reqnames = sk_new_null();
 	ids = sk_OCSP_CERTID_new_null();
@@ -153,6 +155,22 @@ int MAIN(int argc, char **argv)
 				}
 			else badarg = 1;
 			}
+		else if (!strcmp(*args, "-timeout"))
+			{
+			if (args[1])
+				{
+				args++;
+				req_timeout = atol(*args);
+				if (req_timeout < 0)
+					{
+					BIO_printf(bio_err,
+						"Illegal timeout value %s\n",
+						*args);
+					badarg = 1;
+					}
+				}
+			else badarg = 1;
+			}
 		else if (!strcmp(*args, "-url"))
 			{
 			if (args[1])
@@ -702,47 +720,14 @@ int MAIN(int argc, char **argv)
 	else if (host)
 		{
 #ifndef OPENSSL_NO_SOCK
-		cbio = BIO_new_connect(host);
+		resp = process_responder(bio_err, req, host, path,
+						port, use_ssl, req_timeout);
+		if (!resp)
+			goto end;
 #else
 		BIO_printf(bio_err, "Error creating connect BIO - sockets not supported.\n");
 		goto end;
 #endif
-		if (!cbio)
-			{
-			BIO_printf(bio_err, "Error creating connect BIO\n");
-			goto end;
-			}
-		if (port) BIO_set_conn_port(cbio, port);
-		if (use_ssl == 1)
-			{
-			BIO *sbio;
-#if !defined(OPENSSL_NO_SSL2) && !defined(OPENSSL_NO_SSL3)
-			ctx = SSL_CTX_new(SSLv23_client_method());
-#elif !defined(OPENSSL_NO_SSL3)
-			ctx = SSL_CTX_new(SSLv3_client_method());
-#elif !defined(OPENSSL_NO_SSL2)
-			ctx = SSL_CTX_new(SSLv2_client_method());
-#else
-			BIO_printf(bio_err, "SSL is disabled\n");
-			goto end;
-#endif
-			SSL_CTX_set_mode(ctx, SSL_MODE_AUTO_RETRY);
-			sbio = BIO_new_ssl(ctx, 1);
-			cbio = BIO_push(sbio, cbio);
-			}
-		if (BIO_do_connect(cbio) <= 0)
-			{
-			BIO_printf(bio_err, "Error connecting BIO\n");
-			goto end;
-			}
-		resp = OCSP_sendreq_bio(cbio, path, req);
-		BIO_free_all(cbio);
-		cbio = NULL;
-		if (!resp)
-			{
-			BIO_printf(bio_err, "Error querying OCSP responsder\n");
-			goto end;
-			}
 		}
 	else if (respin)
 		{
@@ -891,7 +876,6 @@ end:
 		OPENSSL_free(host);
 		OPENSSL_free(port);
 		OPENSSL_free(path);
-		SSL_CTX_free(ctx);
 		}
 
 	OPENSSL_EXIT(ret);
@@ -1115,6 +1099,7 @@ static char **lookup_serial(CA_DB *db, ASN1_INTEGER *ser)
 	char *itmp, *row[DB_NUMBER],**rrow;
 	for (i = 0; i < DB_NUMBER; i++) row[i] = NULL;
 	bn = ASN1_INTEGER_to_BN(ser,NULL);
+	OPENSSL_assert(bn); /* FIXME: should report an error at this point and abort */
 	if (BN_is_zero(bn))
 		itmp = BUF_strdup("00");
 	else
@@ -1221,8 +1206,141 @@ static int send_ocsp_response(BIO *cbio, OCSP_RESPONSE *resp)
 		return 0;
 	BIO_printf(cbio, http_resp, i2d_OCSP_RESPONSE(resp, NULL));
 	i2d_OCSP_RESPONSE_bio(cbio, resp);
-	BIO_flush(cbio);
+	(void)BIO_flush(cbio);
 	return 1;
 	}
 
+static OCSP_RESPONSE *query_responder(BIO *err, BIO *cbio, char *path,
+				OCSP_REQUEST *req, int req_timeout)
+	{
+	int fd;
+	int rv;
+	OCSP_REQ_CTX *ctx = NULL;
+	OCSP_RESPONSE *rsp = NULL;
+	fd_set confds;
+	struct timeval tv;
+
+	if (req_timeout != -1)
+		BIO_set_nbio(cbio, 1);
+
+	rv = BIO_do_connect(cbio);
+
+	if ((rv <= 0) && ((req_timeout == -1) || !BIO_should_retry(cbio)))
+		{
+		BIO_puts(err, "Error connecting BIO\n");
+		return NULL;
+		}
+
+	if (req_timeout == -1)
+		return OCSP_sendreq_bio(cbio, path, req);
+
+	if (BIO_get_fd(cbio, &fd) <= 0)
+		{
+		BIO_puts(err, "Can't get connection fd\n");
+		goto err;
+		}
+
+	if (rv <= 0)
+		{
+		FD_ZERO(&confds);
+		openssl_fdset(fd, &confds);
+		tv.tv_usec = 0;
+		tv.tv_sec = req_timeout;
+		rv = select(fd + 1, NULL, (void *)&confds, NULL, &tv);
+		if (rv == 0)
+			{
+			BIO_puts(err, "Timeout on connect\n");
+			return NULL;
+			}
+		}
+
+
+	ctx = OCSP_sendreq_new(cbio, path, req, -1);
+	if (!ctx)
+		return NULL;
+	
+	for (;;)
+		{
+		rv = OCSP_sendreq_nbio(&rsp, ctx);
+		if (rv != -1)
+			break;
+		FD_ZERO(&confds);
+		openssl_fdset(fd, &confds);
+		tv.tv_usec = 0;
+		tv.tv_sec = req_timeout;
+		if (BIO_should_read(cbio))
+			rv = select(fd + 1, (void *)&confds, NULL, NULL, &tv);
+		else if (BIO_should_write(cbio))
+			rv = select(fd + 1, NULL, (void *)&confds, NULL, &tv);
+		else
+			{
+			BIO_puts(err, "Unexpected retry condition\n");
+			goto err;
+			}
+		if (rv == 0)
+			{
+			BIO_puts(err, "Timeout on request\n");
+			break;
+			}
+		if (rv == -1)
+			{
+			BIO_puts(err, "Select error\n");
+			break;
+			}
+			
+		}
+	err:
+	if (ctx)
+		OCSP_REQ_CTX_free(ctx);
+
+	return rsp;
+	}
+
+OCSP_RESPONSE *process_responder(BIO *err, OCSP_REQUEST *req,
+			char *host, char *path, char *port, int use_ssl,
+			int req_timeout)
+	{
+	BIO *cbio = NULL;
+	SSL_CTX *ctx = NULL;
+	OCSP_RESPONSE *resp = NULL;
+	cbio = BIO_new_connect(host);
+	if (!cbio)
+		{
+		BIO_printf(err, "Error creating connect BIO\n");
+		goto end;
+		}
+	if (port) BIO_set_conn_port(cbio, port);
+	if (use_ssl == 1)
+		{
+		BIO *sbio;
+#if !defined(OPENSSL_NO_SSL2) && !defined(OPENSSL_NO_SSL3)
+		ctx = SSL_CTX_new(SSLv23_client_method());
+#elif !defined(OPENSSL_NO_SSL3)
+		ctx = SSL_CTX_new(SSLv3_client_method());
+#elif !defined(OPENSSL_NO_SSL2)
+		ctx = SSL_CTX_new(SSLv2_client_method());
+#else
+		BIO_printf(err, "SSL is disabled\n");
+			goto end;
+#endif
+		if (ctx == NULL)
+			{
+			BIO_printf(err, "Error creating SSL context.\n");
+			goto end;
+			}
+		SSL_CTX_set_mode(ctx, SSL_MODE_AUTO_RETRY);
+		sbio = BIO_new_ssl(ctx, 1);
+		cbio = BIO_push(sbio, cbio);
+		}
+	resp = query_responder(err, cbio, path, req, req_timeout);
+	if (!resp)
+		BIO_printf(bio_err, "Error querying OCSP responsder\n");
+	end:
+	if (ctx)
+		SSL_CTX_free(ctx);
+	if (cbio)
+		BIO_free_all(cbio);
+	return resp;
+	}
+
 #endif

apps/openssl-vms.cnf

@@ -188,7 +188,7 @@ nsComment			= "OpenSSL Generated Certificate"
 
 # PKIX recommendations harmless if included in all certificates.
 subjectKeyIdentifier=hash
-authorityKeyIdentifier=keyid,issuer:always
+authorityKeyIdentifier=keyid,issuer
 
 # This stuff is for subjectAltName and issuerAltname.
 # Import the email address.

apps/openssl.c

@@ -56,7 +56,7 @@
  * [including the GNU Public Licence.]
  */
 /* ====================================================================
- * Copyright (c) 1998-2001 The OpenSSL Project.  All rights reserved.
+ * Copyright (c) 1998-2006 The OpenSSL Project.  All rights reserved.
  *
  * Redistribution and use in source and binary forms, with or without
  * modification, are permitted provided that the following conditions
@@ -147,6 +147,7 @@ char *default_config_file=NULL;
 #ifdef MONOLITH
 CONF *config=NULL;
 BIO *bio_err=NULL;
+int in_FIPS_mode=0;
 #endif
 
 
@@ -232,6 +233,19 @@ int main(int Argc, char *Argv[])
 	arg.data=NULL;
 	arg.count=0;
 
+	in_FIPS_mode = 0;
+
+#ifdef OPENSSL_FIPS
+	if(getenv("OPENSSL_FIPS")) {
+		if (!FIPS_mode_set(1)) {
+			ERR_load_crypto_strings();
+			ERR_print_errors(BIO_new_fp(stderr,BIO_NOCLOSE));
+			EXIT(1);
+		}
+		in_FIPS_mode = 1;
+		}
+#endif
+
 	if (bio_err == NULL)
 		if ((bio_err=BIO_new(BIO_s_file())) != NULL)
 			BIO_set_fp(bio_err,stderr,BIO_NOCLOSE|BIO_FP_TEXT);
@@ -445,7 +459,11 @@ static int do_cmd(LHASH *prog, int argc, char *argv[])
 		for (fp=functions; fp->name != NULL; fp++)
 			{
 			nl=0;
+#ifdef OPENSSL_NO_CAMELLIA
 			if (((i++) % 5) == 0)
+#else
+			if (((i++) % 4) == 0)
+#endif
 				{
 				BIO_printf(bio_err,"\n");
 				nl=1;
@@ -466,7 +484,11 @@ static int do_cmd(LHASH *prog, int argc, char *argv[])
 					BIO_printf(bio_err,"\nCipher commands (see the `enc' command for more details)\n");
 					}
 				}
+#ifdef OPENSSL_NO_CAMELLIA
 			BIO_printf(bio_err,"%-15s",fp->name);
+#else
+			BIO_printf(bio_err,"%-18s",fp->name);
+#endif
 			}
 		BIO_printf(bio_err,"\n\n");
 		ret=0;

apps/openssl.cnf

@@ -188,7 +188,7 @@ nsComment			= "OpenSSL Generated Certificate"
 
 # PKIX recommendations harmless if included in all certificates.
 subjectKeyIdentifier=hash
-authorityKeyIdentifier=keyid,issuer:always
+authorityKeyIdentifier=keyid,issuer
 
 # This stuff is for subjectAltName and issuerAltname.
 # Import the email address.

apps/passwd.c

@@ -474,7 +474,8 @@ static int do_passwd(int passed_salt, char **salt_p, char **salt_malloc_p,
 	if ((strlen(passwd) > pw_maxlen))
 		{
 		if (!quiet)
-			BIO_printf(bio_err, "Warning: truncating password to %u characters\n", pw_maxlen);
+			/* XXX: really we should know how to print a size_t, not cast it */
+			BIO_printf(bio_err, "Warning: truncating password to %u characters\n", (unsigned)pw_maxlen);
 		passwd[pw_maxlen] = 0;
 		}
 	assert(strlen(passwd) <= pw_maxlen);

apps/pkcs12.c

@@ -1,11 +1,9 @@
 /* pkcs12.c */
-#if !defined(OPENSSL_NO_DES) && !defined(OPENSSL_NO_SHA1)
-
-/* Written by Dr Stephen N Henson (shenson@bigfoot.com) for the OpenSSL
+/* Written by Dr Stephen N Henson (steve@openssl.org) for the OpenSSL
  * project.
  */
 /* ====================================================================
- * Copyright (c) 1999-2002 The OpenSSL Project.  All rights reserved.
+ * Copyright (c) 1999-2006 The OpenSSL Project.  All rights reserved.
  *
  * Redistribution and use in source and binary forms, with or without
  * modification, are permitted provided that the following conditions
@@ -58,6 +56,9 @@
  *
  */
 
+#include <openssl/opensslconf.h>
+#if !defined(OPENSSL_NO_DES) && !defined(OPENSSL_NO_SHA1)
+
 #include <stdio.h>
 #include <stdlib.h>
 #include <string.h>
@@ -99,6 +100,7 @@ int MAIN(int argc, char **argv)
     char **args;
     char *name = NULL;
     char *csp_name = NULL;
+    int add_lmk = 0;
     PKCS12 *p12 = NULL;
     char pass[50], macpass[50];
     int export_cert = 0;
@@ -109,7 +111,7 @@ int MAIN(int argc, char **argv)
     int maciter = PKCS12_DEFAULT_ITER;
     int twopass = 0;
     int keytype = 0;
-    int cert_pbe = NID_pbe_WithSHA1And40BitRC2_CBC;
+    int cert_pbe;
     int key_pbe = NID_pbe_WithSHA1And3_Key_TripleDES_CBC;
     int ret = 1;
     int macver = 1;
@@ -126,6 +128,13 @@ int MAIN(int argc, char **argv)
 
     apps_startup();
 
+#ifdef OPENSSL_FIPS
+    if (FIPS_mode())
+	cert_pbe = NID_pbe_WithSHA1And3_Key_TripleDES_CBC;
+    else
+#endif
+    cert_pbe = NID_pbe_WithSHA1And40BitRC2_CBC;
+
     enc = EVP_des_ede3_cbc();
     if (bio_err == NULL ) bio_err = BIO_new_fp (stderr, BIO_NOCLOSE);
 
@@ -152,14 +161,22 @@ int MAIN(int argc, char **argv)
     			cert_pbe = NID_pbe_WithSHA1And3_Key_TripleDES_CBC;
 		else if (!strcmp (*args, "-export")) export_cert = 1;
 		else if (!strcmp (*args, "-des")) enc=EVP_des_cbc();
+		else if (!strcmp (*args, "-des3")) enc = EVP_des_ede3_cbc();
 #ifndef OPENSSL_NO_IDEA
 		else if (!strcmp (*args, "-idea")) enc=EVP_idea_cbc();
 #endif
-		else if (!strcmp (*args, "-des3")) enc = EVP_des_ede3_cbc();
+#ifndef OPENSSL_NO_SEED
+		else if (!strcmp(*args, "-seed")) enc=EVP_seed_cbc();
+#endif
 #ifndef OPENSSL_NO_AES
 		else if (!strcmp(*args,"-aes128")) enc=EVP_aes_128_cbc();
 		else if (!strcmp(*args,"-aes192")) enc=EVP_aes_192_cbc();
 		else if (!strcmp(*args,"-aes256")) enc=EVP_aes_256_cbc();
+#endif
+#ifndef OPENSSL_NO_CAMELLIA
+		else if (!strcmp(*args,"-camellia128")) enc=EVP_camellia_128_cbc();
+		else if (!strcmp(*args,"-camellia192")) enc=EVP_camellia_192_cbc();
+		else if (!strcmp(*args,"-camellia256")) enc=EVP_camellia_256_cbc();
 #endif
 		else if (!strcmp (*args, "-noiter")) iter = 1;
 		else if (!strcmp (*args, "-maciter"))
@@ -174,7 +191,8 @@ int MAIN(int argc, char **argv)
 				args++;
 				if (!strcmp(*args, "NONE"))
 					cert_pbe = -1;
-				cert_pbe=OBJ_txt2nid(*args);
+				else
+					cert_pbe=OBJ_txt2nid(*args);
 				if(cert_pbe == NID_undef) {
 					BIO_printf(bio_err,
 						 "Unknown PBE algorithm %s\n", *args);
@@ -214,7 +232,9 @@ int MAIN(int argc, char **argv)
 			args++;	
 			name = *args;
 		    } else badarg = 1;
-		} else if (!strcmp (*args, "-CSP")) {
+		} else if (!strcmp (*args, "-LMK"))
+			add_lmk = 1;
+		else if (!strcmp (*args, "-CSP")) {
 		    if (args[1]) {
 			args++;	
 			csp_name = *args;
@@ -299,9 +319,16 @@ int MAIN(int argc, char **argv)
 #ifndef OPENSSL_NO_IDEA
 	BIO_printf (bio_err, "-idea         encrypt private keys with idea\n");
 #endif
+#ifndef OPENSSL_NO_SEED
+	BIO_printf (bio_err, "-seed         encrypt private keys with seed\n");
+#endif
 #ifndef OPENSSL_NO_AES
 	BIO_printf (bio_err, "-aes128, -aes192, -aes256\n");
 	BIO_printf (bio_err, "              encrypt PEM output with cbc aes\n");
+#endif
+#ifndef OPENSSL_NO_CAMELLIA
+	BIO_printf (bio_err, "-camellia128, -camellia192, -camellia256\n");
+	BIO_printf (bio_err, "              encrypt PEM output with cbc camellia\n");
 #endif
 	BIO_printf (bio_err, "-nodes        don't encrypt private keys\n");
 	BIO_printf (bio_err, "-noiter       don't use encryption iteration\n");
@@ -321,6 +348,8 @@ int MAIN(int argc, char **argv)
 	BIO_printf(bio_err,  "-rand file%cfile%c...\n", LIST_SEPARATOR_CHAR, LIST_SEPARATOR_CHAR);
 	BIO_printf(bio_err,  "              load the file (or the files in the directory) into\n");
 	BIO_printf(bio_err,  "              the random number generator\n");
+  	BIO_printf(bio_err,  "-CSP name     Microsoft CSP name\n");
+ 	BIO_printf(bio_err,  "-LMK          Add local machine keyset attribute to private key\n");
     	goto end;
     }
 
@@ -460,7 +489,7 @@ int MAIN(int argc, char **argv)
 					X509_keyid_set1(ucert, NULL, 0);
 					X509_alias_set1(ucert, NULL, 0);
 					/* Remove from list */
-					sk_X509_delete(certs, i);
+					(void)sk_X509_delete(certs, i);
 					break;
 					}
 				}
@@ -525,8 +554,11 @@ int MAIN(int argc, char **argv)
 		    X509_free(sk_X509_value(chain2, 0));
 		    sk_X509_free(chain2);
 		} else {
-			BIO_printf (bio_err, "Error %s getting chain.\n",
+			if (vret >= 0)
+				BIO_printf (bio_err, "Error %s getting chain.\n",
 					X509_verify_cert_error_string(vret));
+			else
+				ERR_print_errors(bio_err);
 			goto export_end;
 		}			
     	}
@@ -538,7 +570,13 @@ int MAIN(int argc, char **argv)
 		catmp = (unsigned char *)sk_value(canames, i);
 		X509_alias_set1(sk_X509_value(certs, i), catmp, -1);
 		}
-		
+
+	if (csp_name && key)
+		EVP_PKEY_add1_attr_by_NID(key, NID_ms_csp_name,
+				MBSTRING_ASC, (unsigned char *)csp_name, -1);
+
+	if (add_lmk && key)
+		EVP_PKEY_add1_attr_by_NID(key, NID_LocalKeySet, 0, NULL, -1);
 
 #ifdef CRYPTO_MDEBUG
 	CRYPTO_pop_info();
@@ -796,7 +834,7 @@ int get_cert_chain (X509 *cert, X509_STORE *store, STACK_OF(X509) **chain)
 {
 	X509_STORE_CTX store_ctx;
 	STACK_OF(X509) *chn;
-	int i;
+	int i = 0;
 
 	/* FIXME: Should really check the return status of X509_STORE_CTX_init
 	 * for an error, but how that fits into the return value of this
@@ -804,13 +842,17 @@ int get_cert_chain (X509 *cert, X509_STORE *store, STACK_OF(X509) **chain)
 	X509_STORE_CTX_init(&store_ctx, store, cert, NULL);
 	if (X509_verify_cert(&store_ctx) <= 0) {
 		i = X509_STORE_CTX_get_error (&store_ctx);
+		if (i == 0)
+			/* avoid returning 0 if X509_verify_cert() did not
+			 * set an appropriate error value in the context */
+			i = -1;
+		chn = NULL;
 		goto err;
-	}
-	chn =  X509_STORE_CTX_get1_chain(&store_ctx);
-	i = 0;
-	*chain = chn;
+	} else
+		chn = X509_STORE_CTX_get1_chain(&store_ctx);
 err:
 	X509_STORE_CTX_cleanup(&store_ctx);
+	*chain = chn;
 	
 	return i;
 }	
@@ -820,12 +862,14 @@ int alg_print (BIO *x, X509_ALGOR *alg)
 	PBEPARAM *pbe;
 	const unsigned char *p;
 	p = alg->parameter->value.sequence->data;
-	pbe = d2i_PBEPARAM (NULL, &p, alg->parameter->value.sequence->length);
+	pbe = d2i_PBEPARAM(NULL, &p, alg->parameter->value.sequence->length);
+	if (!pbe)
+		return 1;
 	BIO_printf (bio_err, "%s, Iteration %ld\n", 
 		OBJ_nid2ln(OBJ_obj2nid(alg->algorithm)),
 		ASN1_INTEGER_get(pbe->iter));
 	PBEPARAM_free (pbe);
-	return 0;
+	return 1;
 }
 
 /* Load all certificates from a given file */

apps/pkcs8.c

@@ -1,5 +1,5 @@
 /* pkcs8.c */
-/* Written by Dr Stephen N Henson (shenson@bigfoot.com) for the OpenSSL
+/* Written by Dr Stephen N Henson (steve@openssl.org) for the OpenSSL
  * project 1999-2004.
  */
 /* ====================================================================

apps/pkey.c

@@ -0,0 +1,284 @@
+/* apps/pkey.c */
+/* Written by Dr Stephen N Henson (steve@openssl.org) for the OpenSSL
+ * project 2006
+ */
+/* ====================================================================
+ * Copyright (c) 2006 The OpenSSL Project.  All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer. 
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ *
+ * 3. All advertising materials mentioning features or use of this
+ *    software must display the following acknowledgment:
+ *    "This product includes software developed by the OpenSSL Project
+ *    for use in the OpenSSL Toolkit. (http://www.OpenSSL.org/)"
+ *
+ * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
+ *    endorse or promote products derived from this software without
+ *    prior written permission. For written permission, please contact
+ *    licensing@OpenSSL.org.
+ *
+ * 5. Products derived from this software may not be called "OpenSSL"
+ *    nor may "OpenSSL" appear in their names without prior written
+ *    permission of the OpenSSL Project.
+ *
+ * 6. Redistributions of any form whatsoever must retain the following
+ *    acknowledgment:
+ *    "This product includes software developed by the OpenSSL Project
+ *    for use in the OpenSSL Toolkit (http://www.OpenSSL.org/)"
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
+ * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
+ * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE OpenSSL PROJECT OR
+ * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
+ * OF THE POSSIBILITY OF SUCH DAMAGE.
+ * ====================================================================
+ *
+ * This product includes cryptographic software written by Eric Young
+ * (eay@cryptsoft.com).  This product includes software written by Tim
+ * Hudson (tjh@cryptsoft.com).
+ *
+ */
+#include <stdio.h>
+#include <string.h>
+#include "apps.h"
+#include <openssl/pem.h>
+#include <openssl/err.h>
+#include <openssl/evp.h>
+
+#define PROG pkey_main
+
+int MAIN(int, char **);
+
+int MAIN(int argc, char **argv)
+	{
+	ENGINE *e = NULL;
+	char **args, *infile = NULL, *outfile = NULL;
+	char *passargin = NULL, *passargout = NULL;
+	BIO *in = NULL, *out = NULL;
+	const EVP_CIPHER *cipher = NULL;
+	int informat, outformat;
+	int pubin = 0, pubout = 0, pubtext = 0, text = 0, noout = 0;
+	EVP_PKEY *pkey=NULL;
+	char *passin = NULL, *passout = NULL;
+	int badarg = 0;
+#ifndef OPENSSL_NO_ENGINE
+	char *engine=NULL;
+#endif
+	int ret = 1;
+
+	if (bio_err == NULL)
+		bio_err = BIO_new_fp (stderr, BIO_NOCLOSE);
+
+	if (!load_config(bio_err, NULL))
+		goto end;
+
+	informat=FORMAT_PEM;
+	outformat=FORMAT_PEM;
+
+	ERR_load_crypto_strings();
+	OpenSSL_add_all_algorithms();
+	args = argv + 1;
+	while (!badarg && *args && *args[0] == '-')
+		{
+		if (!strcmp(*args,"-inform"))
+			{
+			if (args[1])
+				{
+				args++;
+				informat=str2fmt(*args);
+				}
+			else badarg = 1;
+			}
+		else if (!strcmp(*args,"-outform"))
+			{
+			if (args[1])
+				{
+				args++;
+				outformat=str2fmt(*args);
+				}
+			else badarg = 1;
+			}
+		else if (!strcmp(*args,"-passin"))
+			{
+			if (!args[1]) goto bad;
+			passargin= *(++args);
+			}
+		else if (!strcmp(*args,"-passout"))
+			{
+			if (!args[1]) goto bad;
+			passargout= *(++args);
+			}
+#ifndef OPENSSL_NO_ENGINE
+		else if (strcmp(*args,"-engine") == 0)
+			{
+			if (!args[1]) goto bad;
+			engine= *(++args);
+			}
+#endif
+		else if (!strcmp (*args, "-in"))
+			{
+			if (args[1])
+				{
+				args++;
+				infile = *args;
+				}
+			else badarg = 1;
+			}
+		else if (!strcmp (*args, "-out"))
+			{
+			if (args[1])
+				{
+				args++;
+				outfile = *args;
+				}
+			else badarg = 1;
+			}
+		else if (strcmp(*args,"-pubin") == 0)
+			{
+			pubin=1;
+			pubout=1;
+			pubtext=1;
+			}
+		else if (strcmp(*args,"-pubout") == 0)
+			pubout=1;
+		else if (strcmp(*args,"-text_pub") == 0)
+			{
+			pubtext=1;
+			text=1;
+			}
+		else if (strcmp(*args,"-text") == 0)
+			text=1;
+		else if (strcmp(*args,"-noout") == 0)
+			noout=1;
+		else
+			{
+			cipher = EVP_get_cipherbyname(*args + 1);
+			if (!cipher)
+				{
+				BIO_printf(bio_err, "Unknown cipher %s\n",
+								*args + 1);
+				badarg = 1;
+				}
+			}
+		args++;
+		}
+
+	if (badarg)
+		{
+		bad:
+		BIO_printf(bio_err, "Usage pkey [options]\n");
+		BIO_printf(bio_err, "where options are\n");
+		BIO_printf(bio_err, "-in file        input file\n");
+		BIO_printf(bio_err, "-inform X       input format (DER or PEM)\n");
+		BIO_printf(bio_err, "-passin arg     input file pass phrase source\n");
+		BIO_printf(bio_err, "-outform X      output format (DER or PEM)\n");
+		BIO_printf(bio_err, "-out file       output file\n");
+		BIO_printf(bio_err, "-passout arg    output file pass phrase source\n");
+#ifndef OPENSSL_NO_ENGINE
+		BIO_printf(bio_err, "-engine e       use engine e, possibly a hardware device.\n");
+#endif
+		return 1;
+		}
+
+#ifndef OPENSSL_NO_ENGINE
+        e = setup_engine(bio_err, engine, 0);
+#endif
+
+	if (!app_passwd(bio_err, passargin, passargout, &passin, &passout))
+		{
+		BIO_printf(bio_err, "Error getting passwords\n");
+		goto end;
+		}
+
+	if (outfile)
+		{
+		if (!(out = BIO_new_file (outfile, "wb")))
+			{
+			BIO_printf(bio_err,
+				 "Can't open output file %s\n", outfile);
+			goto end;
+			}
+		}
+	else
+		{
+		out = BIO_new_fp (stdout, BIO_NOCLOSE);
+#ifdef OPENSSL_SYS_VMS
+			{
+			BIO *tmpbio = BIO_new(BIO_f_linebuffer());
+			out = BIO_push(tmpbio, out);
+			}
+#endif
+		}
+
+	if (pubin)
+		pkey = load_pubkey(bio_err, infile, informat, 1,
+			passin, e, "Public Key");
+	else
+		pkey = load_key(bio_err, infile, informat, 1,
+			passin, e, "key");
+	if (!pkey)
+		goto end;
+
+	if (!noout)
+		{
+		if (outformat == FORMAT_PEM) 
+			{
+			if (pubout)
+				PEM_write_bio_PUBKEY(out,pkey);
+			else
+				PEM_write_bio_PrivateKey(out, pkey, cipher,
+							NULL, 0, NULL, passout);
+			}
+		else if (outformat == FORMAT_ASN1)
+			{
+			if (pubout)
+				i2d_PUBKEY_bio(out, pkey);
+			else
+				i2d_PrivateKey_bio(out, pkey);
+			}
+		else
+			{
+			BIO_printf(bio_err, "Bad format specified for key\n");
+			goto end;
+			}
+
+		}
+
+	if (text)
+		{
+		if (pubtext)
+			EVP_PKEY_print_public(out, pkey, 0, NULL);
+		else
+			EVP_PKEY_print_private(out, pkey, 0, NULL);
+		}
+
+	ret = 0;
+
+	end:
+	EVP_PKEY_free(pkey);
+	BIO_free_all(out);
+	BIO_free(in);
+	if (passin)
+		OPENSSL_free(passin);
+	if (passout)
+		OPENSSL_free(passout);
+
+	return ret;
+	}

apps/pkeyparam.c

@@ -0,0 +1,201 @@
+/* apps/pkeyparam.c */
+/* Written by Dr Stephen N Henson (steve@openssl.org) for the OpenSSL
+ * project 2006
+ */
+/* ====================================================================
+ * Copyright (c) 2006 The OpenSSL Project.  All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer. 
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ *
+ * 3. All advertising materials mentioning features or use of this
+ *    software must display the following acknowledgment:
+ *    "This product includes software developed by the OpenSSL Project
+ *    for use in the OpenSSL Toolkit. (http://www.OpenSSL.org/)"
+ *
+ * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
+ *    endorse or promote products derived from this software without
+ *    prior written permission. For written permission, please contact
+ *    licensing@OpenSSL.org.
+ *
+ * 5. Products derived from this software may not be called "OpenSSL"
+ *    nor may "OpenSSL" appear in their names without prior written
+ *    permission of the OpenSSL Project.
+ *
+ * 6. Redistributions of any form whatsoever must retain the following
+ *    acknowledgment:
+ *    "This product includes software developed by the OpenSSL Project
+ *    for use in the OpenSSL Toolkit (http://www.OpenSSL.org/)"
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
+ * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
+ * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE OpenSSL PROJECT OR
+ * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
+ * OF THE POSSIBILITY OF SUCH DAMAGE.
+ * ====================================================================
+ *
+ * This product includes cryptographic software written by Eric Young
+ * (eay@cryptsoft.com).  This product includes software written by Tim
+ * Hudson (tjh@cryptsoft.com).
+ *
+ */
+#include <stdio.h>
+#include <string.h>
+#include "apps.h"
+#include <openssl/pem.h>
+#include <openssl/err.h>
+#include <openssl/evp.h>
+
+#define PROG pkeyparam_main
+
+int MAIN(int, char **);
+
+int MAIN(int argc, char **argv)
+	{
+	char **args, *infile = NULL, *outfile = NULL;
+	BIO *in = NULL, *out = NULL;
+	int text = 0, noout = 0;
+	EVP_PKEY *pkey=NULL;
+	int badarg = 0;
+#ifndef OPENSSL_NO_ENGINE
+	ENGINE *e = NULL;
+	char *engine=NULL;
+#endif
+	int ret = 1;
+
+	if (bio_err == NULL)
+		bio_err = BIO_new_fp (stderr, BIO_NOCLOSE);
+
+	if (!load_config(bio_err, NULL))
+		goto end;
+
+	ERR_load_crypto_strings();
+	OpenSSL_add_all_algorithms();
+	args = argv + 1;
+	while (!badarg && *args && *args[0] == '-')
+		{
+		if (!strcmp (*args, "-in"))
+			{
+			if (args[1])
+				{
+				args++;
+				infile = *args;
+				}
+			else badarg = 1;
+			}
+		else if (!strcmp (*args, "-out"))
+			{
+			if (args[1])
+				{
+				args++;
+				outfile = *args;
+				}
+			else badarg = 1;
+			}
+#ifndef OPENSSL_NO_ENGINE
+		else if (strcmp(*args,"-engine") == 0)
+			{
+			if (!args[1]) goto bad;
+			engine= *(++args);
+			}
+#endif
+
+		else if (strcmp(*args,"-text") == 0)
+			text=1;
+		else if (strcmp(*args,"-noout") == 0)
+			noout=1;
+		args++;
+		}
+
+	if (badarg)
+		{
+#ifndef OPENSSL_NO_ENGINE
+		bad:
+#endif
+		BIO_printf(bio_err, "Usage pkeyparam [options]\n");
+		BIO_printf(bio_err, "where options are\n");
+		BIO_printf(bio_err, "-in file        input file\n");
+		BIO_printf(bio_err, "-out file       output file\n");
+		BIO_printf(bio_err, "-text           print parameters as text\n");
+		BIO_printf(bio_err, "-noout          don't output encoded parameters\n");
+#ifndef OPENSSL_NO_ENGINE
+		BIO_printf(bio_err, "-engine e       use engine e, possibly a hardware device.\n");
+#endif
+		return 1;
+		}
+
+#ifndef OPENSSL_NO_ENGINE
+        e = setup_engine(bio_err, engine, 0);
+#endif
+
+	if (infile)
+		{
+		if (!(in = BIO_new_file (infile, "r")))
+			{
+			BIO_printf(bio_err,
+				 "Can't open input file %s\n", infile);
+			goto end;
+			}
+		}
+	else
+		in = BIO_new_fp (stdin, BIO_NOCLOSE);
+
+	if (outfile)
+		{
+		if (!(out = BIO_new_file (outfile, "w")))
+			{
+			BIO_printf(bio_err,
+				 "Can't open output file %s\n", outfile);
+			goto end;
+			}
+		}
+	else
+		{
+		out = BIO_new_fp (stdout, BIO_NOCLOSE);
+#ifdef OPENSSL_SYS_VMS
+			{
+			BIO *tmpbio = BIO_new(BIO_f_linebuffer());
+			out = BIO_push(tmpbio, out);
+			}
+#endif
+		}
+
+	pkey = PEM_read_bio_Parameters(in, NULL);
+	if (!pkey)
+		{
+		BIO_printf(bio_err, "Error reading paramters\n");
+		ERR_print_errors(bio_err);
+		goto end;
+		}
+
+	if (!noout)
+		PEM_write_bio_Parameters(out,pkey);
+
+	if (text)
+		EVP_PKEY_print_params(out, pkey, 0, NULL);
+
+	ret = 0;
+
+	end:
+	EVP_PKEY_free(pkey);
+	BIO_free_all(out);
+	BIO_free(in);
+
+	return ret;
+	}

apps/pkeyutl.c

@@ -0,0 +1,570 @@
+/* Written by Dr Stephen N Henson (steve@openssl.org) for the OpenSSL
+ * project 2006.
+ */
+/* ====================================================================
+ * Copyright (c) 2006 The OpenSSL Project.  All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer. 
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ *
+ * 3. All advertising materials mentioning features or use of this
+ *    software must display the following acknowledgment:
+ *    "This product includes software developed by the OpenSSL Project
+ *    for use in the OpenSSL Toolkit. (http://www.OpenSSL.org/)"
+ *
+ * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
+ *    endorse or promote products derived from this software without
+ *    prior written permission. For written permission, please contact
+ *    licensing@OpenSSL.org.
+ *
+ * 5. Products derived from this software may not be called "OpenSSL"
+ *    nor may "OpenSSL" appear in their names without prior written
+ *    permission of the OpenSSL Project.
+ *
+ * 6. Redistributions of any form whatsoever must retain the following
+ *    acknowledgment:
+ *    "This product includes software developed by the OpenSSL Project
+ *    for use in the OpenSSL Toolkit (http://www.OpenSSL.org/)"
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
+ * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
+ * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE OpenSSL PROJECT OR
+ * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
+ * OF THE POSSIBILITY OF SUCH DAMAGE.
+ * ====================================================================
+ *
+ * This product includes cryptographic software written by Eric Young
+ * (eay@cryptsoft.com).  This product includes software written by Tim
+ * Hudson (tjh@cryptsoft.com).
+ *
+ */
+
+
+#include "apps.h"
+#include <string.h>
+#include <openssl/err.h>
+#include <openssl/pem.h>
+#include <openssl/evp.h>
+
+#define KEY_PRIVKEY	1
+#define KEY_PUBKEY	2
+#define KEY_CERT	3
+
+static void usage(void);
+
+#undef PROG
+
+#define PROG pkeyutl_main
+
+static EVP_PKEY_CTX *init_ctx(int *pkeysize,
+				char *keyfile, int keyform, int key_type,
+				char *passargin, int pkey_op, ENGINE *e);
+
+static int setup_peer(BIO *err, EVP_PKEY_CTX *ctx, int peerform,
+							const char *file);
+
+static int do_keyop(EVP_PKEY_CTX *ctx, int pkey_op,
+		unsigned char *out, size_t *poutlen,
+		unsigned char *in, size_t inlen);
+
+int MAIN(int argc, char **);
+
+int MAIN(int argc, char **argv)
+{
+	BIO *in = NULL, *out = NULL;
+	char *infile = NULL, *outfile = NULL, *sigfile = NULL;
+	ENGINE *e = NULL;
+	int pkey_op = EVP_PKEY_OP_SIGN, key_type = KEY_PRIVKEY;
+	int keyform = FORMAT_PEM, peerform = FORMAT_PEM;
+	char badarg = 0, rev = 0;
+	char hexdump = 0, asn1parse = 0;
+	EVP_PKEY_CTX *ctx = NULL;
+	char *passargin = NULL;
+	int keysize = -1;
+
+	unsigned char *buf_in = NULL, *buf_out = NULL, *sig = NULL;
+	size_t buf_outlen;
+	int buf_inlen = 0, siglen = -1;
+
+	int ret = 1, rv = -1;
+
+	argc--;
+	argv++;
+
+	if(!bio_err) bio_err = BIO_new_fp(stderr, BIO_NOCLOSE);
+
+	if (!load_config(bio_err, NULL))
+		goto end;
+	ERR_load_crypto_strings();
+	OpenSSL_add_all_algorithms();
+	
+	while(argc >= 1)
+		{
+		if (!strcmp(*argv,"-in"))
+			{
+			if (--argc < 1) badarg = 1;
+                        infile= *(++argv);
+			}
+		else if (!strcmp(*argv,"-out"))
+			{
+			if (--argc < 1) badarg = 1;
+			outfile= *(++argv);
+			}
+		else if (!strcmp(*argv,"-sigfile"))
+			{
+			if (--argc < 1) badarg = 1;
+			sigfile= *(++argv);
+			}
+		else if(!strcmp(*argv, "-inkey"))
+			{
+			if (--argc < 1)
+				badarg = 1;
+			else
+				{
+				ctx = init_ctx(&keysize,
+						*(++argv), keyform, key_type,
+						passargin, pkey_op, e);
+				if (!ctx)
+					{
+					BIO_puts(bio_err,
+						"Error initializing context\n");
+					ERR_print_errors(bio_err);
+					badarg = 1;
+					}
+				}
+			}
+		else if (!strcmp(*argv,"-peerkey"))
+			{
+			if (--argc < 1)
+				badarg = 1;
+			else if (!setup_peer(bio_err, ctx, peerform, *(++argv)))
+				badarg = 1;
+			}
+		else if (!strcmp(*argv,"-passin"))
+			{
+			if (--argc < 1) badarg = 1;
+			passargin= *(++argv);
+			}
+		else if (strcmp(*argv,"-peerform") == 0)
+			{
+			if (--argc < 1) badarg = 1;
+			peerform=str2fmt(*(++argv));
+			}
+		else if (strcmp(*argv,"-keyform") == 0)
+			{
+			if (--argc < 1) badarg = 1;
+			keyform=str2fmt(*(++argv));
+			}
+#ifndef OPENSSL_NO_ENGINE
+		else if(!strcmp(*argv, "-engine"))
+			{
+			if (--argc < 1)
+				badarg = 1;
+			else
+				e = setup_engine(bio_err, *(++argv), 0);
+			}
+#endif
+		else if(!strcmp(*argv, "-pubin"))
+			key_type = KEY_PUBKEY;
+		else if(!strcmp(*argv, "-certin"))
+			key_type = KEY_CERT;
+		else if(!strcmp(*argv, "-asn1parse"))
+			asn1parse = 1;
+		else if(!strcmp(*argv, "-hexdump"))
+			hexdump = 1;
+		else if(!strcmp(*argv, "-sign"))
+			pkey_op = EVP_PKEY_OP_SIGN;
+		else if(!strcmp(*argv, "-verify"))
+			pkey_op = EVP_PKEY_OP_VERIFY;
+		else if(!strcmp(*argv, "-verifyrecover"))
+			pkey_op = EVP_PKEY_OP_VERIFYRECOVER;
+		else if(!strcmp(*argv, "-rev"))
+			rev = 1;
+		else if(!strcmp(*argv, "-encrypt"))
+			pkey_op = EVP_PKEY_OP_ENCRYPT;
+		else if(!strcmp(*argv, "-decrypt"))
+			pkey_op = EVP_PKEY_OP_DECRYPT;
+		else if(!strcmp(*argv, "-derive"))
+			pkey_op = EVP_PKEY_OP_DERIVE;
+		else if (strcmp(*argv,"-pkeyopt") == 0)
+			{
+			if (--argc < 1)
+				badarg = 1;
+			else if (!ctx)
+				{
+				BIO_puts(bio_err,
+					"-pkeyopt command before -inkey\n");
+				badarg = 1;
+				}
+			else if (pkey_ctrl_string(ctx, *(++argv)) <= 0)
+				{
+				BIO_puts(bio_err, "parameter setting error\n");
+				ERR_print_errors(bio_err);
+				goto end;
+				}
+			}
+		else badarg = 1;
+		if(badarg)
+			{
+			usage();
+			goto end;
+			}
+		argc--;
+		argv++;
+		}
+
+	if (!ctx)
+		{
+		usage();
+		goto end;
+		}
+
+	if (sigfile && (pkey_op != EVP_PKEY_OP_VERIFY))
+		{
+		BIO_puts(bio_err, "Signature file specified for non verify\n");
+		goto end;
+		}
+
+	if (!sigfile && (pkey_op == EVP_PKEY_OP_VERIFY))
+		{
+		BIO_puts(bio_err, "No signature file specified for verify\n");
+		goto end;
+		}
+
+/* FIXME: seed PRNG only if needed */
+	app_RAND_load_file(NULL, bio_err, 0);
+
+	if (pkey_op != EVP_PKEY_OP_DERIVE)
+		{
+		if(infile)
+			{
+			if(!(in = BIO_new_file(infile, "rb")))
+				{
+				BIO_puts(bio_err,
+					"Error Opening Input File\n");
+				ERR_print_errors(bio_err);	
+				goto end;
+				}
+			}
+		else
+			in = BIO_new_fp(stdin, BIO_NOCLOSE);
+		}
+
+	if(outfile)
+		{
+		if(!(out = BIO_new_file(outfile, "wb")))
+			{
+			BIO_printf(bio_err, "Error Creating Output File\n");
+			ERR_print_errors(bio_err);	
+			goto end;
+			}
+		}
+	else
+		{
+		out = BIO_new_fp(stdout, BIO_NOCLOSE);
+#ifdef OPENSSL_SYS_VMS
+		{
+		    BIO *tmpbio = BIO_new(BIO_f_linebuffer());
+		    out = BIO_push(tmpbio, out);
+		}
+#endif
+	}
+
+	if (sigfile)
+		{
+		BIO *sigbio = BIO_new_file(sigfile, "rb");
+		if (!sigbio)
+			{
+			BIO_printf(bio_err, "Can't open signature file %s\n",
+								sigfile);
+			goto end;
+			}
+		siglen = bio_to_mem(&sig, keysize * 10, sigbio);
+		BIO_free(sigbio);
+		if (siglen <= 0)
+			{
+			BIO_printf(bio_err, "Error reading signature data\n");
+			goto end;
+			}
+		}
+	
+	if (in)
+		{
+		/* Read the input data */
+		buf_inlen = bio_to_mem(&buf_in, keysize * 10, in);
+		if(buf_inlen <= 0)
+			{
+			BIO_printf(bio_err, "Error reading input Data\n");
+			exit(1);
+			}
+		if(rev)
+			{
+			size_t i;
+			unsigned char ctmp;
+			size_t l = (size_t)buf_inlen;
+			for(i = 0; i < l/2; i++)
+				{
+				ctmp = buf_in[i];
+				buf_in[i] = buf_in[l - 1 - i];
+				buf_in[l - 1 - i] = ctmp;
+				}
+			}
+		}
+
+	if(pkey_op == EVP_PKEY_OP_VERIFY)
+		{
+		rv  = EVP_PKEY_verify(ctx, sig, (size_t)siglen,
+				      buf_in, (size_t)buf_inlen);
+		if (rv == 0)
+			BIO_puts(out, "Signature Verification Failure\n");
+		else if (rv == 1)
+			BIO_puts(out, "Signature Verified Successfully\n");
+		if (rv >= 0)
+			goto end;
+		}
+	else
+		{	
+		rv = do_keyop(ctx, pkey_op, NULL, (size_t *)&buf_outlen,
+			      buf_in, (size_t)buf_inlen);
+		if (rv > 0)
+			{
+			buf_out = OPENSSL_malloc(buf_outlen);
+			if (!buf_out)
+				rv = -1;
+			else
+				rv = do_keyop(ctx, pkey_op,
+						buf_out, (size_t *)&buf_outlen,
+						buf_in, (size_t)buf_inlen);
+			}
+		}
+
+	if(rv <= 0)
+		{
+		BIO_printf(bio_err, "Public Key operation error\n");
+		ERR_print_errors(bio_err);
+		goto end;
+		}
+	ret = 0;
+	if(asn1parse)
+		{
+		if(!ASN1_parse_dump(out, buf_out, buf_outlen, 1, -1))
+			ERR_print_errors(bio_err);
+		}
+	else if(hexdump)
+		BIO_dump(out, (char *)buf_out, buf_outlen);
+	else
+		BIO_write(out, buf_out, buf_outlen);
+
+	end:
+	if (ctx)
+		EVP_PKEY_CTX_free(ctx);
+	BIO_free(in);
+	BIO_free_all(out);
+	if (buf_in)
+		OPENSSL_free(buf_in);
+	if (buf_out)
+		OPENSSL_free(buf_out);
+	if (sig)
+		OPENSSL_free(sig);
+	return ret;
+}
+
+static void usage()
+{
+	BIO_printf(bio_err, "Usage: pkeyutl [options]\n");
+	BIO_printf(bio_err, "-in file        input file\n");
+	BIO_printf(bio_err, "-out file       output file\n");
+	BIO_printf(bio_err, "-signature file signature file (verify operation only)\n");
+	BIO_printf(bio_err, "-inkey file     input key\n");
+	BIO_printf(bio_err, "-keyform arg    private key format - default PEM\n");
+	BIO_printf(bio_err, "-pubin          input is a public key\n");
+	BIO_printf(bio_err, "-certin         input is a certificate carrying a public key\n");
+	BIO_printf(bio_err, "-pkeyopt X:Y    public key options\n");
+	BIO_printf(bio_err, "-sign           sign with private key\n");
+	BIO_printf(bio_err, "-verify         verify with public key\n");
+	BIO_printf(bio_err, "-verifyrecover  verify with public key, recover original data\n");
+	BIO_printf(bio_err, "-encrypt        encrypt with public key\n");
+	BIO_printf(bio_err, "-decrypt        decrypt with private key\n");
+	BIO_printf(bio_err, "-derive         derive shared secret\n");
+	BIO_printf(bio_err, "-hexdump        hex dump output\n");
+#ifndef OPENSSL_NO_ENGINE
+	BIO_printf(bio_err, "-engine e       use engine e, possibly a hardware device.\n");
+#endif
+	BIO_printf(bio_err, "-passin arg     pass phrase source\n");
+
+}
+
+static EVP_PKEY_CTX *init_ctx(int *pkeysize,
+				char *keyfile, int keyform, int key_type,
+				char *passargin, int pkey_op, ENGINE *e)
+	{
+	EVP_PKEY *pkey = NULL;
+	EVP_PKEY_CTX *ctx = NULL;
+	char *passin = NULL;
+	int rv = -1;
+	X509 *x;
+	if(((pkey_op == EVP_PKEY_OP_SIGN) || (pkey_op == EVP_PKEY_OP_DECRYPT) 
+		|| (pkey_op == EVP_PKEY_OP_DERIVE))
+		&& (key_type != KEY_PRIVKEY))
+		{
+		BIO_printf(bio_err, "A private key is needed for this operation\n");
+		goto end;
+		}
+	if(!app_passwd(bio_err, passargin, NULL, &passin, NULL))
+		{
+		BIO_printf(bio_err, "Error getting password\n");
+		goto end;
+		}
+	switch(key_type)
+		{
+		case KEY_PRIVKEY:
+		pkey = load_key(bio_err, keyfile, keyform, 0,
+			passin, e, "Private Key");
+		break;
+
+		case KEY_PUBKEY:
+		pkey = load_pubkey(bio_err, keyfile, keyform, 0,
+			NULL, e, "Public Key");
+		break;
+
+		case KEY_CERT:
+		x = load_cert(bio_err, keyfile, keyform,
+			NULL, e, "Certificate");
+		if(x)
+			{
+			pkey = X509_get_pubkey(x);
+			X509_free(x);
+			}
+		break;
+
+		}
+
+	*pkeysize = EVP_PKEY_size(pkey);
+
+	if (!pkey)
+		goto end;
+
+	ctx = EVP_PKEY_CTX_new(pkey, e);
+
+	EVP_PKEY_free(pkey);
+
+	if (!ctx)
+		goto end;
+
+	switch(pkey_op)
+		{
+		case EVP_PKEY_OP_SIGN:
+		rv = EVP_PKEY_sign_init(ctx);
+		break;
+
+		case EVP_PKEY_OP_VERIFY:
+		rv = EVP_PKEY_verify_init(ctx);
+		break;
+
+		case EVP_PKEY_OP_VERIFYRECOVER:
+		rv = EVP_PKEY_verify_recover_init(ctx);
+		break;
+
+		case EVP_PKEY_OP_ENCRYPT:
+		rv = EVP_PKEY_encrypt_init(ctx);
+		break;
+
+		case EVP_PKEY_OP_DECRYPT:
+		rv = EVP_PKEY_decrypt_init(ctx);
+		break;
+
+		case EVP_PKEY_OP_DERIVE:
+		rv = EVP_PKEY_derive_init(ctx);
+		break;
+		}
+
+	if (rv <= 0)
+		{
+		EVP_PKEY_CTX_free(ctx);
+		ctx = NULL;
+		}
+
+	end:
+
+	if (passin)
+		OPENSSL_free(passin);
+
+	return ctx;
+
+
+	}
+
+static int setup_peer(BIO *err, EVP_PKEY_CTX *ctx, int peerform,
+							const char *file)
+	{
+	EVP_PKEY *peer = NULL;
+	int ret;
+	if (!ctx)
+		{
+		BIO_puts(err, "-peerkey command before -inkey\n");
+		return 0;
+		}
+		
+	peer = load_pubkey(bio_err, file, peerform, 0, NULL, NULL, "Peer Key");
+
+	if (!peer)
+		{
+		BIO_printf(bio_err, "Error reading peer key %s\n", file);
+		ERR_print_errors(err);
+		return 0;
+		}
+
+	ret = EVP_PKEY_derive_set_peer(ctx, peer);
+
+	EVP_PKEY_free(peer);
+	if (ret <= 0)
+		ERR_print_errors(err);
+	return ret;
+	}
+
+static int do_keyop(EVP_PKEY_CTX *ctx, int pkey_op,
+		unsigned char *out, size_t *poutlen,
+		unsigned char *in, size_t inlen)
+	{
+	int rv = 0;
+	switch(pkey_op)
+		{
+		case EVP_PKEY_OP_VERIFYRECOVER:
+		rv  = EVP_PKEY_verify_recover(ctx, out, poutlen, in, inlen);
+		break;
+
+		case EVP_PKEY_OP_SIGN:
+		rv  = EVP_PKEY_sign(ctx, out, poutlen, in, inlen);
+		break;
+
+		case EVP_PKEY_OP_ENCRYPT:
+		rv  = EVP_PKEY_encrypt(ctx, out, poutlen, in, inlen);
+		break;
+
+		case EVP_PKEY_OP_DECRYPT:
+		rv  = EVP_PKEY_decrypt(ctx, out, poutlen, in, inlen);
+		break; 
+
+		case EVP_PKEY_OP_DERIVE:
+		rv  = EVP_PKEY_derive(ctx, out, poutlen);
+		break;
+
+		}
+	return rv;
+	}

apps/prime.c

@@ -115,7 +115,7 @@ int MAIN(int argc, char **argv)
 
     BN_print(bio_out,bn);
     BIO_printf(bio_out," is %sprime\n",
-	       BN_is_prime(bn,checks,NULL,NULL,NULL) ? "" : "not ");
+	       BN_is_prime_ex(bn,checks,NULL,NULL) ? "" : "not ");
 
     BN_free(bn);
     BIO_free_all(bio_out);

apps/progs.h

@@ -28,6 +28,7 @@ extern int speed_main(int argc,char *argv[]);
 extern int s_time_main(int argc,char *argv[]);
 extern int version_main(int argc,char *argv[]);
 extern int pkcs7_main(int argc,char *argv[]);
+extern int cms_main(int argc,char *argv[]);
 extern int crl2pkcs7_main(int argc,char *argv[]);
 extern int sess_id_main(int argc,char *argv[]);
 extern int ciphers_main(int argc,char *argv[]);
@@ -109,6 +110,9 @@ FUNCTION functions[] = {
 #endif
 	{FUNC_TYPE_GENERAL,"version",version_main},
 	{FUNC_TYPE_GENERAL,"pkcs7",pkcs7_main},
+#ifndef OPENSSL_NO_CMS
+	{FUNC_TYPE_GENERAL,"cms",cms_main},
+#endif
 	{FUNC_TYPE_GENERAL,"crl2pkcs7",crl2pkcs7_main},
 	{FUNC_TYPE_GENERAL,"sess_id",sess_id_main},
 #if !defined(OPENSSL_NO_SOCK) && !(defined(OPENSSL_NO_SSL2) && defined(OPENSSL_NO_SSL3))
@@ -165,6 +169,24 @@ FUNCTION functions[] = {
 #endif
 #ifndef OPENSSL_NO_AES
 	{FUNC_TYPE_CIPHER,"aes-256-ecb",enc_main},
+#endif
+#ifndef OPENSSL_NO_CAMELLIA
+	{FUNC_TYPE_CIPHER,"camellia-128-cbc",enc_main},
+#endif
+#ifndef OPENSSL_NO_CAMELLIA
+	{FUNC_TYPE_CIPHER,"camellia-128-ecb",enc_main},
+#endif
+#ifndef OPENSSL_NO_CAMELLIA
+	{FUNC_TYPE_CIPHER,"camellia-192-cbc",enc_main},
+#endif
+#ifndef OPENSSL_NO_CAMELLIA
+	{FUNC_TYPE_CIPHER,"camellia-192-ecb",enc_main},
+#endif
+#ifndef OPENSSL_NO_CAMELLIA
+	{FUNC_TYPE_CIPHER,"camellia-256-cbc",enc_main},
+#endif
+#ifndef OPENSSL_NO_CAMELLIA
+	{FUNC_TYPE_CIPHER,"camellia-256-ecb",enc_main},
 #endif
 	{FUNC_TYPE_CIPHER,"base64",enc_main},
 #ifndef OPENSSL_NO_DES
@@ -179,6 +201,9 @@ FUNCTION functions[] = {
 #ifndef OPENSSL_NO_IDEA
 	{FUNC_TYPE_CIPHER,"idea",enc_main},
 #endif
+#ifndef OPENSSL_NO_SEED
+	{FUNC_TYPE_CIPHER,"seed",enc_main},
+#endif
 #ifndef OPENSSL_NO_RC4
 	{FUNC_TYPE_CIPHER,"rc4",enc_main},
 #endif
@@ -245,6 +270,18 @@ FUNCTION functions[] = {
 #ifndef OPENSSL_NO_IDEA
 	{FUNC_TYPE_CIPHER,"idea-ofb",enc_main},
 #endif
+#ifndef OPENSSL_NO_SEED
+	{FUNC_TYPE_CIPHER,"seed-cbc",enc_main},
+#endif
+#ifndef OPENSSL_NO_SEED
+	{FUNC_TYPE_CIPHER,"seed-ecb",enc_main},
+#endif
+#ifndef OPENSSL_NO_SEED
+	{FUNC_TYPE_CIPHER,"seed-cfb",enc_main},
+#endif
+#ifndef OPENSSL_NO_SEED
+	{FUNC_TYPE_CIPHER,"seed-ofb",enc_main},
+#endif
 #ifndef OPENSSL_NO_RC2
 	{FUNC_TYPE_CIPHER,"rc2-cbc",enc_main},
 #endif

apps/progs.pl

@@ -43,6 +43,8 @@ foreach (@ARGV)
 		{ print "#ifndef OPENSSL_NO_DH\n${str}#endif\n"; }
 	elsif ( ($_ =~ /^pkcs12$/))
 		{ print "#if !defined(OPENSSL_NO_DES) && !defined(OPENSSL_NO_SHA1)\n${str}#endif\n"; }
+	elsif ( ($_ =~ /^cms$/))
+		{ print "#ifndef OPENSSL_NO_CMS\n${str}#endif\n"; }
 	else
 		{ print $str; }
 	}
@@ -57,14 +59,18 @@ foreach (
 	"aes-128-cbc", "aes-128-ecb",
 	"aes-192-cbc", "aes-192-ecb",
 	"aes-256-cbc", "aes-256-ecb",
+	"camellia-128-cbc", "camellia-128-ecb",
+	"camellia-192-cbc", "camellia-192-ecb",
+	"camellia-256-cbc", "camellia-256-ecb",
 	"base64",
-	"des", "des3", "desx", "idea", "rc4", "rc4-40",
+	"des", "des3", "desx", "idea", "seed", "rc4", "rc4-40",
 	"rc2", "bf", "cast", "rc5",
 	"des-ecb", "des-ede",    "des-ede3",
 	"des-cbc", "des-ede-cbc","des-ede3-cbc",
 	"des-cfb", "des-ede-cfb","des-ede3-cfb",
 	"des-ofb", "des-ede-ofb","des-ede3-ofb",
-	"idea-cbc","idea-ecb",   "idea-cfb", "idea-ofb",
+	"idea-cbc","idea-ecb",    "idea-cfb", "idea-ofb",
+	"seed-cbc","seed-ecb",    "seed-cfb", "seed-ofb",
 	"rc2-cbc", "rc2-ecb", "rc2-cfb","rc2-ofb", "rc2-64-cbc", "rc2-40-cbc",
 	"bf-cbc",  "bf-ecb",     "bf-cfb",   "bf-ofb",
 	"cast5-cbc","cast5-ecb", "cast5-cfb","cast5-ofb",
@@ -75,7 +81,9 @@ foreach (
 	$t=sprintf("\t{FUNC_TYPE_CIPHER,\"%s\",enc_main},\n",$_);
 	if    ($_ =~ /des/)  { $t="#ifndef OPENSSL_NO_DES\n${t}#endif\n"; }
 	elsif ($_ =~ /aes/)  { $t="#ifndef OPENSSL_NO_AES\n${t}#endif\n"; }
+	elsif ($_ =~ /camellia/)  { $t="#ifndef OPENSSL_NO_CAMELLIA\n${t}#endif\n"; }
 	elsif ($_ =~ /idea/) { $t="#ifndef OPENSSL_NO_IDEA\n${t}#endif\n"; }
+	elsif ($_ =~ /seed/) { $t="#ifndef OPENSSL_NO_SEED\n${t}#endif\n"; }
 	elsif ($_ =~ /rc4/)  { $t="#ifndef OPENSSL_NO_RC4\n${t}#endif\n"; }
 	elsif ($_ =~ /rc2/)  { $t="#ifndef OPENSSL_NO_RC2\n${t}#endif\n"; }
 	elsif ($_ =~ /bf/)   { $t="#ifndef OPENSSL_NO_BF\n${t}#endif\n"; }

apps/rand.c

@@ -68,7 +68,8 @@
 
 /* -out file         - write to file
  * -rand file:file   - PRNG seed files
- * -base64           - encode output
+ * -base64           - base64 encode output
+ * -hex              - hex encode output
  * num               - write 'num' bytes
  */
 
@@ -84,6 +85,7 @@ int MAIN(int argc, char **argv)
 	char *outfile = NULL;
 	char *inrand = NULL;
 	int base64 = 0;
+	int hex = 0;
 	BIO *out = NULL;
 	int num = -1;
 #ifndef OPENSSL_NO_ENGINE
@@ -133,6 +135,13 @@ int MAIN(int argc, char **argv)
 			else
 				badopt = 1;
 			}
+		else if (strcmp(argv[i], "-hex") == 0)
+			{
+			if (!hex)
+				hex = 1;
+			else
+				badopt = 1;
+			}
 		else if (isdigit((unsigned char)argv[i][0]))
 			{
 			if (num < 0)
@@ -148,6 +157,9 @@ int MAIN(int argc, char **argv)
 			badopt = 1;
 		}
 
+	if (hex && base64)
+		badopt = 1;
+
 	if (num < 0)
 		badopt = 1;
 	
@@ -160,7 +172,8 @@ int MAIN(int argc, char **argv)
 		BIO_printf(bio_err, "-engine e             - use engine e, possibly a hardware device.\n");
 #endif
 		BIO_printf(bio_err, "-rand file%cfile%c... - seed PRNG from files\n", LIST_SEPARATOR_CHAR, LIST_SEPARATOR_CHAR);
-		BIO_printf(bio_err, "-base64               - encode output\n");
+		BIO_printf(bio_err, "-base64               - base64 encode output\n");
+		BIO_printf(bio_err, "-hex                  - hex encode output\n");
 		goto err;
 		}
 
@@ -210,10 +223,18 @@ int MAIN(int argc, char **argv)
 		r = RAND_bytes(buf, chunk);
 		if (r <= 0)
 			goto err;
-		BIO_write(out, buf, chunk);
+		if (!hex) 
+			BIO_write(out, buf, chunk);
+		else
+			{
+			for (i = 0; i < chunk; i++)
+				BIO_printf(out, "%02x", buf[i]);
+			}
 		num -= chunk;
 		}
-	BIO_flush(out);
+	if (hex)
+		BIO_puts(out, "\n");
+	(void)BIO_flush(out);
 
 	app_RAND_write_file(NULL, bio_err);
 	ret = 0;

apps/req.c

@@ -79,7 +79,13 @@
 #include <openssl/x509v3.h>
 #include <openssl/objects.h>
 #include <openssl/pem.h>
-#include "../crypto/cryptlib.h"
+#include <openssl/bn.h>
+#ifndef OPENSSL_NO_RSA
+#include <openssl/rsa.h>
+#endif
+#ifndef OPENSSL_NO_DSA
+#include <openssl/dsa.h>
+#endif
 
 #define SECTION		"req"
 
@@ -344,6 +350,7 @@ int MAIN(int argc, char **argv)
 				{
 				X509 *xtmp=NULL;
 				EVP_PKEY *dtmp;
+				EC_GROUP *group;
 
 				pkey_type=TYPE_EC;
 				p+=3;
@@ -354,10 +361,10 @@ int MAIN(int argc, char **argv)
 					}
 				if ((ec_params = EC_KEY_new()) == NULL)
 					goto end;
-				if ((ec_params->group = PEM_read_bio_ECPKParameters(in, NULL, NULL, NULL)) == NULL)
+				group = PEM_read_bio_ECPKParameters(in, NULL, NULL, NULL);
+				if (group == NULL)
 					{
-					if (ec_params)
-						EC_KEY_free(ec_params);
+					EC_KEY_free(ec_params);
 					ERR_clear_error();
 					(void)BIO_reset(in);
 					if ((xtmp=PEM_read_bio_X509(in,NULL,NULL,NULL)) == NULL)
@@ -369,7 +376,7 @@ int MAIN(int argc, char **argv)
 					if ((dtmp=X509_get_pubkey(xtmp))==NULL)
 						goto end;
 					if (dtmp->type == EVP_PKEY_EC)
-						ec_params = ECParameters_dup(dtmp->pkey.eckey);
+						ec_params = EC_KEY_dup(dtmp->pkey.ec);
 					EVP_PKEY_free(dtmp);
 					X509_free(xtmp);
 					if (ec_params == NULL)
@@ -378,12 +385,16 @@ int MAIN(int argc, char **argv)
 						goto end;
 						}
 					}
+				else
+					{
+					if (EC_KEY_set_group(ec_params, group) == 0)
+						goto end;
+					EC_GROUP_free(group);
+					}
 
 				BIO_free(in);
 				in=NULL;
-				
-				newkey = EC_GROUP_get_degree(ec_params->group);
-
+				newkey = EC_GROUP_get_degree(EC_KEY_get0_group(ec_params));
 				}
 			else
 #endif
@@ -708,8 +719,7 @@ bad:
 			   message */
 			goto end;
 			}
-		if (EVP_PKEY_type(pkey->type) == EVP_PKEY_DSA || 
-			EVP_PKEY_type(pkey->type) == EVP_PKEY_EC)
+		else
 			{
 			char *randfile = NCONF_get_string(req_conf,SECTION,"RANDFILE");
 			if (randfile == NULL)
@@ -720,7 +730,9 @@ bad:
 
 	if (newreq && (pkey == NULL))
 		{
+#ifndef OPENSSL_NO_RSA
 		BN_GENCB cb;
+#endif
 		char *randfile = NCONF_get_string(req_conf,SECTION,"RANDFILE");
 		if (randfile == NULL)
 			ERR_clear_error();

apps/rsa.c

@@ -56,6 +56,7 @@
  * [including the GNU Public Licence.]
  */
 
+#include <openssl/opensslconf.h>
 #ifndef OPENSSL_NO_RSA
 #include <stdio.h>
 #include <stdlib.h>
@@ -80,9 +81,13 @@
  * -des		- encrypt output if PEM format with DES in cbc mode
  * -des3	- encrypt output if PEM format
  * -idea	- encrypt output if PEM format
+ * -seed	- encrypt output if PEM format
  * -aes128	- encrypt output if PEM format
  * -aes192	- encrypt output if PEM format
  * -aes256	- encrypt output if PEM format
+ * -camellia128 - encrypt output if PEM format
+ * -camellia192 - encrypt output if PEM format
+ * -camellia256 - encrypt output if PEM format
  * -text	- print a text version
  * -modulus	- print the RSA key modulus
  * -check	- verify key consistency
@@ -207,9 +212,16 @@ bad:
 #ifndef OPENSSL_NO_IDEA
 		BIO_printf(bio_err," -idea           encrypt PEM output with cbc idea\n");
 #endif
+#ifndef OPENSSL_NO_SEED
+		BIO_printf(bio_err," -seed           encrypt PEM output with cbc seed\n");
+#endif
 #ifndef OPENSSL_NO_AES
 		BIO_printf(bio_err," -aes128, -aes192, -aes256\n");
 		BIO_printf(bio_err,"                 encrypt PEM output with cbc aes\n");
+#endif
+#ifndef OPENSSL_NO_CAMELLIA
+		BIO_printf(bio_err," -camellia128, -camellia192, -camellia256\n");
+		BIO_printf(bio_err,"                 encrypt PEM output with cbc camellia\n");
 #endif
 		BIO_printf(bio_err," -text           print the key in text\n");
 		BIO_printf(bio_err," -noout          don't print key out\n");

apps/rsautl.c

@@ -1,5 +1,5 @@
 /* rsautl.c */
-/* Written by Dr Stephen N Henson (shenson@bigfoot.com) for the OpenSSL
+/* Written by Dr Stephen N Henson (steve@openssl.org) for the OpenSSL
  * project 2000.
  */
 /* ====================================================================
@@ -56,6 +56,7 @@
  *
  */
 
+#include <openssl/opensslconf.h>
 #ifndef OPENSSL_NO_RSA
 
 #include "apps.h"
@@ -118,24 +119,36 @@ int MAIN(int argc, char **argv)
 	while(argc >= 1)
 	{
 		if (!strcmp(*argv,"-in")) {
-			if (--argc < 1) badarg = 1;
-                        infile= *(++argv);
+			if (--argc < 1)
+				badarg = 1;
+			else
+				infile= *(++argv);
 		} else if (!strcmp(*argv,"-out")) {
-			if (--argc < 1) badarg = 1;
-			outfile= *(++argv);
+			if (--argc < 1)
+				badarg = 1;
+			else
+				outfile= *(++argv);
 		} else if(!strcmp(*argv, "-inkey")) {
-			if (--argc < 1) badarg = 1;
-			keyfile = *(++argv);
+			if (--argc < 1)
+				badarg = 1;
+			else
+				keyfile = *(++argv);
 		} else if (!strcmp(*argv,"-passin")) {
-			if (--argc < 1) badarg = 1;
-			passargin= *(++argv);
+			if (--argc < 1)
+				badarg = 1;
+			else
+				passargin= *(++argv);
 		} else if (strcmp(*argv,"-keyform") == 0) {
-			if (--argc < 1) badarg = 1;
-			keyform=str2fmt(*(++argv));
+			if (--argc < 1)
+				badarg = 1;
+			else
+				keyform=str2fmt(*(++argv));
 #ifndef OPENSSL_NO_ENGINE
 		} else if(!strcmp(*argv, "-engine")) {
-			if (--argc < 1) badarg = 1;
-			engine = *(++argv);
+			if (--argc < 1)
+				badarg = 1;
+			else
+				engine = *(++argv);
 #endif
 		} else if(!strcmp(*argv, "-pubin")) {
 			key_type = KEY_PUBKEY;
@@ -148,6 +161,7 @@ int MAIN(int argc, char **argv)
 		else if(!strcmp(*argv, "-oaep")) pad = RSA_PKCS1_OAEP_PADDING;
 		else if(!strcmp(*argv, "-ssl")) pad = RSA_SSLV23_PADDING;
 		else if(!strcmp(*argv, "-pkcs")) pad = RSA_PKCS1_PADDING;
+		else if(!strcmp(*argv, "-x931")) pad = RSA_X931_PADDING;
 		else if(!strcmp(*argv, "-sign")) {
 			rsa_mode = RSA_SIGN;
 			need_priv = 1;

apps/s_apps.h

@@ -167,4 +167,7 @@ long MS_CALLBACK bio_dump_callback(BIO *bio, int cmd, const char *argp,
 #ifdef HEADER_SSL_H
 void MS_CALLBACK apps_ssl_info_callback(const SSL *s, int where, int ret);
 void MS_CALLBACK msg_cb(int write_p, int version, int content_type, const void *buf, size_t len, SSL *ssl, void *arg);
+void MS_CALLBACK tlsext_cb(SSL *s, int client_server, int type,
+					unsigned char *data, int len,
+					void *arg);
 #endif

apps/s_cb.c

@@ -573,5 +573,64 @@ void MS_CALLBACK msg_cb(int write_p, int version, int content_type, const void *
 			BIO_printf(bio, " ...");
 		BIO_printf(bio, "\n");
 		}
-	BIO_flush(bio);
+	(void)BIO_flush(bio);
+	}
+
+void MS_CALLBACK tlsext_cb(SSL *s, int client_server, int type,
+					unsigned char *data, int len,
+					void *arg)
+	{
+	BIO *bio = arg;
+	char *extname;
+
+	switch(type)
+		{
+		case TLSEXT_TYPE_server_name:
+		extname = "server name";
+		break;
+
+		case TLSEXT_TYPE_max_fragment_length:
+		extname = "max fragment length";
+		break;
+
+		case TLSEXT_TYPE_client_certificate_url:
+		extname = "client certificate URL";
+		break;
+
+		case TLSEXT_TYPE_trusted_ca_keys:
+		extname = "trusted CA keys";
+		break;
+
+		case TLSEXT_TYPE_truncated_hmac:
+		extname = "truncated HMAC";
+		break;
+
+		case TLSEXT_TYPE_status_request:
+		extname = "status request";
+		break;
+
+		case TLSEXT_TYPE_elliptic_curves:
+		extname = "elliptic curves";
+		break;
+
+		case TLSEXT_TYPE_ec_point_formats:
+		extname = "EC point formats";
+		break;
+
+		case TLSEXT_TYPE_session_ticket:
+		extname = "server ticket";
+		break;
+
+
+		default:
+		extname = "unknown";
+		break;
+
+		}
+	
+	BIO_printf(bio, "TLS %s extension \"%s\" (id=%d), len=%d\n",
+			client_server ? "server": "client",
+			extname, type, len);
+	BIO_dump(bio, (char *)data, len);
+	(void)BIO_flush(bio);
 	}

apps/s_client.c

@@ -134,6 +134,7 @@ typedef unsigned int u_int;
 #include <openssl/err.h>
 #include <openssl/pem.h>
 #include <openssl/rand.h>
+#include <openssl/ocsp.h>
 #include "s_apps.h"
 #include "timeouts.h"
 
@@ -171,11 +172,18 @@ static int c_nbio=0;
 #endif
 static int c_Pause=0;
 static int c_debug=0;
+#ifndef OPENSSL_NO_TLSEXT
+static int c_tlsextdebug=0;
+static int c_status_req=0;
+#endif
 static int c_msg=0;
 static int c_showcerts=0;
 
 static void sc_usage(void);
 static void print_stuff(BIO *berr,SSL *con,int full);
+#ifndef OPENSSL_NO_TLSEXT
+static int ocsp_resp_cb(SSL *s, void *arg);
+#endif
 static BIO *bio_c_out=NULL;
 static int c_quiet=0;
 static int c_ign_eof=0;
@@ -188,7 +196,7 @@ static void sc_usage(void)
 	BIO_printf(bio_err," -port port     - use -connect instead\n");
 	BIO_printf(bio_err," -connect host:port - who to connect to (default is %s:%s)\n",SSL_HOST_NAME,PORT_STR);
 
-	BIO_printf(bio_err," -verify arg   - turn on peer certificate verification\n");
+	BIO_printf(bio_err," -verify depth - turn on peer certificate verification\n");
 	BIO_printf(bio_err," -cert arg     - certificate file to use, PEM format assumed\n");
 	BIO_printf(bio_err," -certform arg - certificate format (PEM or DER) PEM default\n");
 	BIO_printf(bio_err," -key arg      - Private key file to use, in cert file if\n");
@@ -213,6 +221,7 @@ static void sc_usage(void)
 	BIO_printf(bio_err," -crlf         - convert LF from terminal into CRLF\n");
 	BIO_printf(bio_err," -quiet        - no s_client output\n");
 	BIO_printf(bio_err," -ign_eof      - ignore input eof (default when -quiet)\n");
+	BIO_printf(bio_err," -no_ign_eof   - don't ignore input eof\n");
 	BIO_printf(bio_err," -ssl2         - just use SSLv2\n");
 	BIO_printf(bio_err," -ssl3         - just use SSLv3\n");
 	BIO_printf(bio_err," -tls1         - just use TLSv1\n");
@@ -226,14 +235,53 @@ static void sc_usage(void)
 	BIO_printf(bio_err," -starttls prot - use the STARTTLS command before starting TLS\n");
 	BIO_printf(bio_err,"                 for those protocols that support it, where\n");
 	BIO_printf(bio_err,"                 'prot' defines which one to assume.  Currently,\n");
-	BIO_printf(bio_err,"                 only \"smtp\" and \"pop3\" are supported.\n");
+	BIO_printf(bio_err,"                 only \"smtp\", \"pop3\", \"imap\", \"ftp\" and \"xmpp\"\n");
+	BIO_printf(bio_err,"                 are supported.\n");
 #ifndef OPENSSL_NO_ENGINE
 	BIO_printf(bio_err," -engine id    - Initialise and use the specified engine\n");
 #endif
 	BIO_printf(bio_err," -rand file%cfile%c...\n", LIST_SEPARATOR_CHAR, LIST_SEPARATOR_CHAR);
-
+	BIO_printf(bio_err," -sess_out arg - file to write SSL session to\n");
+	BIO_printf(bio_err," -sess_in arg  - file to read SSL session from\n");
+#ifndef OPENSSL_NO_TLSEXT
+	BIO_printf(bio_err," -servername host  - Set TLS extension servername in ClientHello\n");
+	BIO_printf(bio_err," -tlsextdebug      - hex dump of all TLS extensions received\n");
+	BIO_printf(bio_err," -status           - request certificate status from server\n");
+	BIO_printf(bio_err," -no_ticket        - disable use of RFC4507bis session tickets\n");
+#endif
 	}
 
+#ifndef OPENSSL_NO_TLSEXT
+
+/* This is a context that we pass to callbacks */
+typedef struct tlsextctx_st {
+   BIO * biodebug;
+   int ack;
+} tlsextctx;
+
+
+static int MS_CALLBACK ssl_servername_cb(SSL *s, int *ad, void *arg)
+	{
+	tlsextctx * p = (tlsextctx *) arg;
+	const char * hn= SSL_get_servername(s, TLSEXT_NAMETYPE_host_name);
+	if (SSL_get_servername_type(s) != -1) 
+ 	        p->ack = !SSL_session_reused(s) && hn != NULL;
+	else 
+		BIO_printf(bio_err,"Can't use SSL_get_servername\n");
+	
+	return SSL_TLSEXT_ERR_OK;
+	}
+#endif
+enum
+{
+	PROTO_OFF	= 0,
+	PROTO_SMTP,
+	PROTO_POP3,
+	PROTO_IMAP,
+	PROTO_FTP,
+	PROTO_XMPP
+};
+
 int MAIN(int, char **);
 
 int MAIN(int argc, char **argv)
@@ -260,24 +308,40 @@ int MAIN(int argc, char **argv)
 	int write_tty,read_tty,write_ssl,read_ssl,tty_on,ssl_pending;
 	SSL_CTX *ctx=NULL;
 	int ret=1,in_init=1,i,nbio_test=0;
-	int starttls_proto = 0;
+	int starttls_proto = PROTO_OFF;
 	int prexit = 0, vflags = 0;
 	SSL_METHOD *meth=NULL;
+#ifdef sock_type
+#undef sock_type
+#endif
 	int sock_type=SOCK_STREAM;
 	BIO *sbio;
 	char *inrand=NULL;
+	int mbuf_len=0;
 #ifndef OPENSSL_NO_ENGINE
 	char *engine_id=NULL;
-	ENGINE *e=NULL;
+	char *ssl_client_engine_id=NULL;
+	ENGINE *ssl_client_engine=NULL;
 #endif
+	ENGINE *e=NULL;
 #if defined(OPENSSL_SYS_WINDOWS) || defined(OPENSSL_SYS_MSDOS) || defined(OPENSSL_SYS_NETWARE)
 	struct timeval tv;
 #endif
 
+#ifndef OPENSSL_NO_TLSEXT
+	char *servername = NULL; 
+        tlsextctx tlsextcbp = 
+        {NULL,0};
+#endif
+	char *sess_in = NULL;
+	char *sess_out = NULL;
 	struct sockaddr peer;
 	int peerlen = sizeof(peer);
 	int enable_timeouts = 0 ;
 	long mtu = 0;
+#ifndef OPENSSL_NO_JPAKE
+	char *jpake_secret = NULL;
+#endif
 
 #if !defined(OPENSSL_NO_SSL2) && !defined(OPENSSL_NO_SSL3)
 	meth=SSLv23_client_method();
@@ -348,6 +412,16 @@ int MAIN(int argc, char **argv)
 			if (--argc < 1) goto bad;
 			cert_file= *(++argv);
 			}
+		else if	(strcmp(*argv,"-sess_out") == 0)
+			{
+			if (--argc < 1) goto bad;
+			sess_out = *(++argv);
+			}
+		else if	(strcmp(*argv,"-sess_in") == 0)
+			{
+			if (--argc < 1) goto bad;
+			sess_in = *(++argv);
+			}
 		else if	(strcmp(*argv,"-certform") == 0)
 			{
 			if (--argc < 1) goto bad;
@@ -368,10 +442,18 @@ int MAIN(int argc, char **argv)
 			}
 		else if	(strcmp(*argv,"-ign_eof") == 0)
 			c_ign_eof=1;
+		else if	(strcmp(*argv,"-no_ign_eof") == 0)
+			c_ign_eof=0;
 		else if	(strcmp(*argv,"-pause") == 0)
 			c_Pause=1;
 		else if	(strcmp(*argv,"-debug") == 0)
 			c_debug=1;
+#ifndef OPENSSL_NO_TLSEXT
+		else if	(strcmp(*argv,"-tlsextdebug") == 0)
+			c_tlsextdebug=1;
+		else if	(strcmp(*argv,"-status") == 0)
+			c_status_req=1;
+#endif
 #ifdef WATT32
 		else if (strcmp(*argv,"-wdebug") == 0)
 			dbug_init();
@@ -447,6 +529,10 @@ int MAIN(int argc, char **argv)
 			off|=SSL_OP_NO_SSLv3;
 		else if (strcmp(*argv,"-no_ssl2") == 0)
 			off|=SSL_OP_NO_SSLv2;
+#ifndef OPENSSL_NO_TLSEXT
+		else if	(strcmp(*argv,"-no_ticket") == 0)
+			{ off|=SSL_OP_NO_TICKET; }
+#endif
 		else if (strcmp(*argv,"-serverpref") == 0)
 			off|=SSL_OP_CIPHER_SERVER_PREFERENCE;
 		else if	(strcmp(*argv,"-cipher") == 0)
@@ -463,9 +549,15 @@ int MAIN(int argc, char **argv)
 			if (--argc < 1) goto bad;
 			++argv;
 			if (strcmp(*argv,"smtp") == 0)
-				starttls_proto = 1;
+				starttls_proto = PROTO_SMTP;
 			else if (strcmp(*argv,"pop3") == 0)
-				starttls_proto = 2;
+				starttls_proto = PROTO_POP3;
+			else if (strcmp(*argv,"imap") == 0)
+				starttls_proto = PROTO_IMAP;
+			else if (strcmp(*argv,"ftp") == 0)
+				starttls_proto = PROTO_FTP;
+			else if (strcmp(*argv, "xmpp") == 0)
+				starttls_proto = PROTO_XMPP;
 			else
 				goto bad;
 			}
@@ -475,12 +567,32 @@ int MAIN(int argc, char **argv)
 			if (--argc < 1) goto bad;
 			engine_id = *(++argv);
 			}
+		else if	(strcmp(*argv,"-ssl_client_engine") == 0)
+			{
+			if (--argc < 1) goto bad;
+			ssl_client_engine_id = *(++argv);
+			}
 #endif
 		else if (strcmp(*argv,"-rand") == 0)
 			{
 			if (--argc < 1) goto bad;
 			inrand= *(++argv);
 			}
+#ifndef OPENSSL_NO_TLSEXT
+		else if (strcmp(*argv,"-servername") == 0)
+			{
+			if (--argc < 1) goto bad;
+			servername= *(++argv);
+			/* meth=TLSv1_client_method(); */
+			}
+#endif
+#ifndef OPENSSL_NO_JPAKE
+		else if (strcmp(*argv,"-jpake") == 0)
+			{
+			if (--argc < 1) goto bad;
+			jpake_secret = *++argv;
+			}
+#endif
 		else
 			{
 			BIO_printf(bio_err,"unknown option %s\n",*argv);
@@ -502,6 +614,16 @@ bad:
 
 #ifndef OPENSSL_NO_ENGINE
         e = setup_engine(bio_err, engine_id, 1);
+	if (ssl_client_engine_id)
+		{
+		ssl_client_engine = ENGINE_by_id(ssl_client_engine_id);
+		if (!ssl_client_engine)
+			{
+			BIO_printf(bio_err,
+					"Error getting client auth engine\n");
+			goto end;
+			}
+		}
 #endif
 	if (!app_passwd(bio_err, passarg, NULL, &pass, NULL))
 		{
@@ -569,6 +691,20 @@ bad:
 		goto end;
 		}
 
+#ifndef OPENSSL_NO_ENGINE
+	if (ssl_client_engine)
+		{
+		if (!SSL_CTX_set_client_cert_engine(ctx, ssl_client_engine))
+			{
+			BIO_puts(bio_err, "Error setting client auth engine\n");
+			ERR_print_errors(bio_err);
+			ENGINE_free(ssl_client_engine);
+			goto end;
+			}
+		ENGINE_free(ssl_client_engine);
+		}
+#endif
+
 	if (bugs)
 		SSL_CTX_set_options(ctx,SSL_OP_ALL|off);
 	else
@@ -604,8 +740,51 @@ bad:
 
 	store = SSL_CTX_get_cert_store(ctx);
 	X509_STORE_set_flags(store, vflags);
+#ifndef OPENSSL_NO_TLSEXT
+	if (servername != NULL)
+		{
+		tlsextcbp.biodebug = bio_err;
+		SSL_CTX_set_tlsext_servername_callback(ctx, ssl_servername_cb);
+		SSL_CTX_set_tlsext_servername_arg(ctx, &tlsextcbp);
+		}
+#endif
 
 	con=SSL_new(ctx);
+	if (sess_in)
+		{
+		SSL_SESSION *sess;
+		BIO *stmp = BIO_new_file(sess_in, "r");
+		if (!stmp)
+			{
+			BIO_printf(bio_err, "Can't open session file %s\n",
+						sess_in);
+			ERR_print_errors(bio_err);
+			goto end;
+			}
+		sess = PEM_read_bio_SSL_SESSION(stmp, NULL, 0, NULL);
+		BIO_free(stmp);
+		if (!sess)
+			{
+			BIO_printf(bio_err, "Can't open session file %s\n",
+						sess_in);
+			ERR_print_errors(bio_err);
+			goto end;
+			}
+		SSL_set_session(con, sess);
+		SSL_SESSION_free(sess);
+		}
+#ifndef OPENSSL_NO_TLSEXT
+	if (servername != NULL)
+		{
+		if (!SSL_set_tlsext_host_name(con,servername))
+			{
+			BIO_printf(bio_err,"Unable to set TLS servername extension.\n");
+			ERR_print_errors(bio_err);
+			goto end;
+			}
+		}
+#endif
+
 #ifndef OPENSSL_NO_KRB5
 	if (con  &&  (con->kssl_ctx = kssl_ctx_new()) != NULL)
                 {
@@ -651,7 +830,7 @@ re_start:
 			goto end;
 			}
 
-		BIO_ctrl_set_connected(sbio, 1, &peer);
+		(void)BIO_ctrl_set_connected(sbio, 1, &peer);
 
 		if ( enable_timeouts)
 			{
@@ -676,8 +855,6 @@ re_start:
 	else
 		sbio=BIO_new_socket(s,BIO_NOCLOSE);
 
-
-
 	if (nbio_test)
 		{
 		BIO *test;
@@ -690,13 +867,41 @@ re_start:
 		{
 		con->debug=1;
 		BIO_set_callback(sbio,bio_dump_callback);
-		BIO_set_callback_arg(sbio,bio_c_out);
+		BIO_set_callback_arg(sbio,(char *)bio_c_out);
 		}
 	if (c_msg)
 		{
 		SSL_set_msg_callback(con, msg_cb);
 		SSL_set_msg_callback_arg(con, bio_c_out);
 		}
+#ifndef OPENSSL_NO_TLSEXT
+	if (c_tlsextdebug)
+		{
+		SSL_set_tlsext_debug_callback(con, tlsext_cb);
+		SSL_set_tlsext_debug_arg(con, bio_c_out);
+		}
+	if (c_status_req)
+		{
+		SSL_set_tlsext_status_type(con, TLSEXT_STATUSTYPE_ocsp);
+		SSL_CTX_set_tlsext_status_cb(ctx, ocsp_resp_cb);
+		SSL_CTX_set_tlsext_status_arg(ctx, bio_c_out);
+#if 0
+{
+STACK_OF(OCSP_RESPID) *ids = sk_OCSP_RESPID_new_null();
+OCSP_RESPID *id = OCSP_RESPID_new();
+id->value.byKey = ASN1_OCTET_STRING_new();
+id->type = V_OCSP_RESPID_KEY;
+ASN1_STRING_set(id->value.byKey, "Hello World", -1);
+sk_OCSP_RESPID_push(ids, id);
+SSL_set_tlsext_status_ids(con, ids);
+}
+#endif
+		}
+#endif
+#ifndef OPENSSL_NO_JPAKE
+	if (jpake_secret)
+		jpake_client_auth(bio_c_out, sbio, jpake_secret);
+#endif
 
 	SSL_set_bio(con,sbio,sbio);
 	SSL_set_connect_state(con);
@@ -716,18 +921,115 @@ re_start:
 	sbuf_off=0;
 
 	/* This is an ugly hack that does a lot of assumptions */
-	if (starttls_proto == 1)
+	/* We do have to handle multi-line responses which may come
+ 	   in a single packet or not. We therefore have to use
+	   BIO_gets() which does need a buffering BIO. So during
+	   the initial chitchat we do push a buffering BIO into the
+	   chain that is removed again later on to not disturb the
+	   rest of the s_client operation. */
+	if (starttls_proto == PROTO_SMTP)
 		{
-		BIO_read(sbio,mbuf,BUFSIZZ);
+		int foundit=0;
+		BIO *fbio = BIO_new(BIO_f_buffer());
+		BIO_push(fbio, sbio);
+		/* wait for multi-line response to end from SMTP */
+		do
+			{
+			mbuf_len = BIO_gets(fbio,mbuf,BUFSIZZ);
+			}
+		while (mbuf_len>3 && mbuf[3]=='-');
+		/* STARTTLS command requires EHLO... */
+		BIO_printf(fbio,"EHLO openssl.client.net\r\n");
+		(void)BIO_flush(fbio);
+		/* wait for multi-line response to end EHLO SMTP response */
+		do
+			{
+			mbuf_len = BIO_gets(fbio,mbuf,BUFSIZZ);
+			if (strstr(mbuf,"STARTTLS"))
+				foundit=1;
+			}
+		while (mbuf_len>3 && mbuf[3]=='-');
+		(void)BIO_flush(fbio);
+		BIO_pop(fbio);
+		BIO_free(fbio);
+		if (!foundit)
+			BIO_printf(bio_err,
+				   "didn't found starttls in server response,"
+				   " try anyway...\n");
 		BIO_printf(sbio,"STARTTLS\r\n");
 		BIO_read(sbio,sbuf,BUFSIZZ);
 		}
-	if (starttls_proto == 2)
+	else if (starttls_proto == PROTO_POP3)
 		{
 		BIO_read(sbio,mbuf,BUFSIZZ);
 		BIO_printf(sbio,"STLS\r\n");
 		BIO_read(sbio,sbuf,BUFSIZZ);
 		}
+	else if (starttls_proto == PROTO_IMAP)
+		{
+		int foundit=0;
+		BIO *fbio = BIO_new(BIO_f_buffer());
+		BIO_push(fbio, sbio);
+		BIO_gets(fbio,mbuf,BUFSIZZ);
+		/* STARTTLS command requires CAPABILITY... */
+		BIO_printf(fbio,". CAPABILITY\r\n");
+		(void)BIO_flush(fbio);
+		/* wait for multi-line CAPABILITY response */
+		do
+			{
+			mbuf_len = BIO_gets(fbio,mbuf,BUFSIZZ);
+			if (strstr(mbuf,"STARTTLS"))
+				foundit=1;
+			}
+		while (mbuf_len>3 && mbuf[0]!='.');
+		(void)BIO_flush(fbio);
+		BIO_pop(fbio);
+		BIO_free(fbio);
+		if (!foundit)
+			BIO_printf(bio_err,
+				   "didn't found STARTTLS in server response,"
+				   " try anyway...\n");
+		BIO_printf(sbio,". STARTTLS\r\n");
+		BIO_read(sbio,sbuf,BUFSIZZ);
+		}
+	else if (starttls_proto == PROTO_FTP)
+		{
+		BIO *fbio = BIO_new(BIO_f_buffer());
+		BIO_push(fbio, sbio);
+		/* wait for multi-line response to end from FTP */
+		do
+			{
+			mbuf_len = BIO_gets(fbio,mbuf,BUFSIZZ);
+			}
+		while (mbuf_len>3 && mbuf[3]=='-');
+		(void)BIO_flush(fbio);
+		BIO_pop(fbio);
+		BIO_free(fbio);
+		BIO_printf(sbio,"AUTH TLS\r\n");
+		BIO_read(sbio,sbuf,BUFSIZZ);
+		}
+	if (starttls_proto == PROTO_XMPP)
+		{
+		int seen = 0;
+		BIO_printf(sbio,"<stream:stream "
+		    "xmlns:stream='http://etherx.jabber.org/streams' "
+		    "xmlns='jabber:client' to='%s' version='1.0'>", host);
+		seen = BIO_read(sbio,mbuf,BUFSIZZ);
+		mbuf[seen] = 0;
+		while (!strstr(mbuf, "<starttls xmlns='urn:ietf:params:xml:ns:xmpp-tls'"))
+			{
+			if (strstr(mbuf, "/stream:features>"))
+				goto shut;
+			seen = BIO_read(sbio,mbuf,BUFSIZZ);
+			mbuf[seen] = 0;
+			}
+		BIO_printf(sbio, "<starttls xmlns='urn:ietf:params:xml:ns:xmpp-tls'/>");
+		seen = BIO_read(sbio,sbuf,BUFSIZZ);
+		sbuf[seen] = 0;
+		if (!strstr(sbuf, "<proceed"))
+			goto shut;
+		mbuf[0] = 0;
+		}
 
 	for (;;)
 		{
@@ -745,6 +1047,17 @@ re_start:
 			if (in_init)
 				{
 				in_init=0;
+				if (sess_out)
+					{
+					BIO *stmp = BIO_new_file(sess_out, "w");
+					if (stmp)
+						{
+						PEM_write_bio_SSL_SESSION(stmp, SSL_get_session(con));
+						BIO_free(stmp);
+						}
+					else 
+						BIO_printf(bio_err, "Error writing session file %s\n", sess_out);
+					}
 				print_stuff(bio_c_out,con,full_log);
 				if (full_log > 0) full_log--;
 
@@ -752,7 +1065,7 @@ re_start:
 					{
 					BIO_printf(bio_err,"%s",mbuf);
 					/* We don't need to know any more */
-					starttls_proto = 0;
+					starttls_proto = PROTO_OFF;
 					}
 
 				if (reconnect)
@@ -1093,7 +1406,9 @@ static void print_stuff(BIO *bio, SSL *s, int full)
 	SSL_CIPHER *c;
 	X509_NAME *xn;
 	int j,i;
+#ifndef OPENSSL_NO_COMP
 	const COMP_METHOD *comp, *expansion;
+#endif
 
 	if (full)
 		{
@@ -1196,17 +1511,47 @@ static void print_stuff(BIO *bio, SSL *s, int full)
 							 EVP_PKEY_bits(pktmp));
 		EVP_PKEY_free(pktmp);
 	}
+#ifndef OPENSSL_NO_COMP
 	comp=SSL_get_current_compression(s);
 	expansion=SSL_get_current_expansion(s);
 	BIO_printf(bio,"Compression: %s\n",
 		comp ? SSL_COMP_get_name(comp) : "NONE");
 	BIO_printf(bio,"Expansion: %s\n",
 		expansion ? SSL_COMP_get_name(expansion) : "NONE");
+#endif
 	SSL_SESSION_print(bio,SSL_get_session(s));
 	BIO_printf(bio,"---\n");
 	if (peer != NULL)
 		X509_free(peer);
 	/* flush, or debugging output gets mixed with http response */
-	BIO_flush(bio);
+	(void)BIO_flush(bio);
 	}
 
+#ifndef OPENSSL_NO_TLSEXT
+
+static int ocsp_resp_cb(SSL *s, void *arg)
+	{
+	const unsigned char *p;
+	int len;
+	OCSP_RESPONSE *rsp;
+	len = SSL_get_tlsext_status_ocsp_resp(s, &p);
+	BIO_puts(arg, "OCSP response: ");
+	if (!p)
+		{
+		BIO_puts(arg, "no response sent\n");
+		return 1;
+		}
+	rsp = d2i_OCSP_RESPONSE(NULL, &p, len);
+	if (!rsp)
+		{
+		BIO_puts(arg, "response parse error\n");
+		BIO_dump_indent(arg, (char *)p, len, 4);
+		return 0;
+		}
+	BIO_puts(arg, "\n======================================\n");
+	OCSP_RESPONSE_print(arg, rsp, 0);
+	BIO_puts(arg, "======================================\n");
+	OCSP_RESPONSE_free(rsp);
+	return 1;
+	}
+#endif  /* ndef OPENSSL_NO_TLSEXT */

apps/s_server.c

@@ -153,6 +153,13 @@ typedef unsigned int u_int;
 #include <openssl/x509.h>
 #include <openssl/ssl.h>
 #include <openssl/rand.h>
+#include <openssl/ocsp.h>
+#ifndef OPENSSL_NO_DH
+#include <openssl/dh.h>
+#endif
+#ifndef OPENSSL_NO_RSA
+#include <openssl/rsa.h>
+#endif
 #include "s_apps.h"
 #include "timeouts.h"
 
@@ -232,6 +239,9 @@ static int bufsize=BUFSIZZ;
 static int accept_socket= -1;
 
 #define TEST_CERT	"server.pem"
+#ifndef OPENSSL_NO_TLSEXT
+#define TEST_CERT2	"server2.pem"
+#endif
 #undef PROG
 #define PROG		s_server_main
 
@@ -241,6 +251,9 @@ static char *cipher=NULL;
 static int s_server_verify=SSL_VERIFY_NONE;
 static int s_server_session_id_context = 1; /* anything will do */
 static const char *s_cert_file=TEST_CERT,*s_key_file=NULL;
+#ifndef OPENSSL_NO_TLSEXT
+static const char *s_cert_file2=TEST_CERT2,*s_key_file2=NULL;
+#endif
 static char *s_dcert_file=NULL,*s_dkey_file=NULL;
 #ifdef FIONBIO
 static int s_nbio=0;
@@ -248,10 +261,18 @@ static int s_nbio=0;
 static int s_nbio_test=0;
 int s_crlf=0;
 static SSL_CTX *ctx=NULL;
+#ifndef OPENSSL_NO_TLSEXT
+static SSL_CTX *ctx2=NULL;
+#endif
 static int www=0;
 
 static BIO *bio_s_out=NULL;
 static int s_debug=0;
+#ifndef OPENSSL_NO_TLSEXT
+static int s_tlsextdebug=0;
+static int s_tlsextstatus=0;
+static int cert_status_cb(SSL *s, void *arg);
+#endif
 static int s_msg=0;
 static int s_quiet=0;
 
@@ -262,6 +283,9 @@ static char *engine_id=NULL;
 static const char *session_id_prefix=NULL;
 
 static int enable_timeouts = 0;
+#ifdef mtu
+#undef mtu
+#endif
 static long mtu;
 static int cert_chain = 0;
 
@@ -276,6 +300,11 @@ static void s_server_init(void)
 	s_dkey_file=NULL;
 	s_cert_file=TEST_CERT;
 	s_key_file=NULL;
+#ifndef OPENSSL_NO_TLSEXT
+	s_cert_file2=TEST_CERT2;
+	s_key_file2=NULL;
+	ctx2=NULL;
+#endif
 #ifdef FIONBIO
 	s_nbio=0;
 #endif
@@ -304,6 +333,11 @@ static void sv_usage(void)
 	BIO_printf(bio_err," -Verify arg   - turn on peer certificate verification, must have a cert.\n");
 	BIO_printf(bio_err," -cert arg     - certificate file to use\n");
 	BIO_printf(bio_err,"                 (default is %s)\n",TEST_CERT);
+	BIO_printf(bio_err," -crl_check    - check the peer certificate has not been revoked by its CA.\n" \
+	                   "                 The CRL(s) are appended to the certificate file\n");
+	BIO_printf(bio_err," -crl_check_all - check the peer certificate has not been revoked by its CA\n" \
+	                   "                 or any other CRL in the CA chain. CRL(s) are appened to the\n" \
+	                   "                 the certificate file.\n");
 	BIO_printf(bio_err," -certform arg - certificate format (PEM or DER) PEM default\n");
 	BIO_printf(bio_err," -key arg      - Private Key file to use, in cert file if\n");
 	BIO_printf(bio_err,"                 not specified (default is %s)\n",TEST_CERT);
@@ -362,6 +396,16 @@ static void sv_usage(void)
 #endif
 	BIO_printf(bio_err," -id_prefix arg - Generate SSL/TLS session IDs prefixed by 'arg'\n");
 	BIO_printf(bio_err," -rand file%cfile%c...\n", LIST_SEPARATOR_CHAR, LIST_SEPARATOR_CHAR);
+#ifndef OPENSSL_NO_TLSEXT
+	BIO_printf(bio_err," -servername host - servername for HostName TLS extension\n");
+	BIO_printf(bio_err," -servername_fatal - on mismatch send fatal alert (default warning alert)\n");
+	BIO_printf(bio_err," -cert2 arg    - certificate file to use for servername\n");
+	BIO_printf(bio_err,"                 (default is %s)\n",TEST_CERT2);
+	BIO_printf(bio_err," -key2 arg     - Private Key file to use for servername, in cert file if\n");
+	BIO_printf(bio_err,"                 not specified (default is %s)\n",TEST_CERT2);
+	BIO_printf(bio_err," -tlsextdebug  - hex dump of all TLS extensions received\n");
+	BIO_printf(bio_err," -no_ticket    - disable use of RFC4507bis session tickets\n");
+#endif
 	}
 
 static int local_argc=0;
@@ -517,8 +561,191 @@ static int ebcdic_puts(BIO *bp, const char *str)
 }
 #endif
 
+#ifndef OPENSSL_NO_TLSEXT
+
+/* This is a context that we pass to callbacks */
+typedef struct tlsextctx_st {
+   char * servername;
+   BIO * biodebug;
+   int extension_error;
+} tlsextctx;
+
+
+static int MS_CALLBACK ssl_servername_cb(SSL *s, int *ad, void *arg)
+	{
+	tlsextctx * p = (tlsextctx *) arg;
+	const char * servername = SSL_get_servername(s, TLSEXT_NAMETYPE_host_name);
+        if (servername && p->biodebug) 
+		BIO_printf(p->biodebug,"Hostname in TLS extension: \"%s\"\n",servername);
+        
+	if (!p->servername)
+		return SSL_TLSEXT_ERR_NOACK;
+	
+	if (servername)
+		{
+    		if (strcmp(servername,p->servername)) 
+			return p->extension_error;
+		if (ctx2)
+			{
+			BIO_printf(p->biodebug,"Swiching server context.\n");
+			SSL_set_SSL_CTX(s,ctx2);
+			}     
+		}
+	return SSL_TLSEXT_ERR_OK;
+}
+
+/* Structure passed to cert status callback */
+
+typedef struct tlsextstatusctx_st {
+   /* Default responder to use */
+   char *host, *path, *port;
+   int use_ssl;
+   int timeout;
+   BIO *err;
+   int verbose;
+} tlsextstatusctx;
+
+static tlsextstatusctx tlscstatp = {NULL, NULL, NULL, 0, -1, NULL, 0};
+
+/* Certificate Status callback. This is called when a client includes a
+ * certificate status request extension.
+ *
+ * This is a simplified version. It examines certificates each time and
+ * makes one OCSP responder query for each request.
+ *
+ * A full version would store details such as the OCSP certificate IDs and
+ * minimise the number of OCSP responses by caching them until they were
+ * considered "expired".
+ */
+
+static int cert_status_cb(SSL *s, void *arg)
+	{
+	tlsextstatusctx *srctx = arg;
+	BIO *err = srctx->err;
+	char *host, *port, *path;
+	int use_ssl;
+	unsigned char *rspder = NULL;
+	int rspderlen;
+	STACK *aia = NULL;
+	X509 *x = NULL;
+	X509_STORE_CTX inctx;
+	X509_OBJECT obj;
+	OCSP_REQUEST *req = NULL;
+	OCSP_RESPONSE *resp = NULL;
+	OCSP_CERTID *id = NULL;
+	STACK_OF(X509_EXTENSION) *exts;
+	int ret = SSL_TLSEXT_ERR_NOACK;
+	int i;
+#if 0
+STACK_OF(OCSP_RESPID) *ids;
+SSL_get_tlsext_status_ids(s, &ids);
+BIO_printf(err, "cert_status: received %d ids\n", sk_OCSP_RESPID_num(ids));
+#endif
+	if (srctx->verbose)
+		BIO_puts(err, "cert_status: callback called\n");
+	/* Build up OCSP query from server certificate */
+	x = SSL_get_certificate(s);
+	aia = X509_get1_ocsp(x);
+	if (aia)
+		{
+		if (!OCSP_parse_url(sk_value(aia, 0),
+			&host, &port, &path, &use_ssl))
+			{
+			BIO_puts(err, "cert_status: can't parse AIA URL\n");
+			goto err;
+			}
+		if (srctx->verbose)
+			BIO_printf(err, "cert_status: AIA URL: %s\n",
+					sk_value(aia, 0));
+		}
+	else
+		{
+		if (!srctx->host)
+			{
+			BIO_puts(srctx->err, "cert_status: no AIA and no default responder URL\n");
+			goto done;
+			}
+		host = srctx->host;
+		path = srctx->path;
+		port = srctx->port;
+		use_ssl = srctx->use_ssl;
+		}
+		
+	if (!X509_STORE_CTX_init(&inctx,
+				SSL_CTX_get_cert_store(SSL_get_SSL_CTX(s)),
+				NULL, NULL))
+		goto err;
+	if (X509_STORE_get_by_subject(&inctx,X509_LU_X509,
+				X509_get_issuer_name(x),&obj) <= 0)
+		{
+		BIO_puts(err, "cert_status: Can't retrieve issuer certificate.\n");
+		X509_STORE_CTX_cleanup(&inctx);
+		goto done;
+		}
+	req = OCSP_REQUEST_new();
+	if (!req)
+		goto err;
+	id = OCSP_cert_to_id(NULL, x, obj.data.x509);
+	X509_free(obj.data.x509);
+	X509_STORE_CTX_cleanup(&inctx);
+	if (!id)
+		goto err;
+	if (!OCSP_request_add0_id(req, id))
+		goto err;
+	id = NULL;
+	/* Add any extensions to the request */
+	SSL_get_tlsext_status_exts(s, &exts);
+	for (i = 0; i < sk_X509_EXTENSION_num(exts); i++)
+		{
+		X509_EXTENSION *ext = sk_X509_EXTENSION_value(exts, i);
+		if (!OCSP_REQUEST_add_ext(req, ext, -1))
+			goto err;
+		}
+	resp = process_responder(err, req, host, path, port, use_ssl,
+					srctx->timeout);
+	if (!resp)
+		{
+		BIO_puts(err, "cert_status: error querying responder\n");
+		goto done;
+		}
+	rspderlen = i2d_OCSP_RESPONSE(resp, &rspder);
+	if (rspderlen <= 0)
+		goto err;
+	SSL_set_tlsext_status_ocsp_resp(s, rspder, rspderlen);
+	if (srctx->verbose)
+		{
+		BIO_puts(err, "cert_status: ocsp response sent:\n");
+		OCSP_RESPONSE_print(err, resp, 2);
+		}
+	ret = SSL_TLSEXT_ERR_OK;
+	done:
+	if (ret != SSL_TLSEXT_ERR_OK)
+		ERR_print_errors(err);
+	if (aia)
+		{
+		OPENSSL_free(host);
+		OPENSSL_free(path);
+		OPENSSL_free(port);
+		X509_email_free(aia);
+		}
+	if (id)
+		OCSP_CERTID_free(id);
+	if (req)
+		OCSP_REQUEST_free(req);
+	if (resp)
+		OCSP_RESPONSE_free(resp);
+	return ret;
+	err:
+	ret = SSL_TLSEXT_ERR_ALERT_FATAL;
+	goto done;
+	}
+#endif
 int MAIN(int, char **);
 
+#ifndef OPENSSL_NO_JPAKE
+static char *jpake_secret = NULL;
+#endif
+
 int MAIN(int argc, char *argv[])
 	{
 	X509_STORE *store = NULL;
@@ -527,17 +754,17 @@ int MAIN(int argc, char *argv[])
 	char *CApath=NULL,*CAfile=NULL;
 	unsigned char *context = NULL;
 	char *dhfile = NULL;
+#ifndef OPENSSL_NO_ECDH
 	char *named_curve = NULL;
+#endif
 	int badop=0,bugs=0;
 	int ret=1;
 	int off=0;
 	int no_tmp_rsa=0,no_dhe=0,no_ecdhe=0,nocert=0;
 	int state=0;
 	SSL_METHOD *meth=NULL;
-    int sock_type=SOCK_STREAM;
-#ifndef OPENSSL_NO_ENGINE
+        int socket_type=SOCK_STREAM;
 	ENGINE *e=NULL;
-#endif
 	char *inrand=NULL;
 	int s_cert_format = FORMAT_PEM, s_key_format = FORMAT_PEM;
 	char *passarg = NULL, *pass = NULL;
@@ -545,6 +772,13 @@ int MAIN(int argc, char *argv[])
 	int s_dcert_format = FORMAT_PEM, s_dkey_format = FORMAT_PEM;
 	X509 *s_cert = NULL, *s_dcert = NULL;
 	EVP_PKEY *s_key = NULL, *s_dkey = NULL;
+#ifndef OPENSSL_NO_TLSEXT
+	EVP_PKEY *s_key2 = NULL;
+	X509 *s_cert2 = NULL;
+#endif
+#ifndef OPENSSL_NO_TLSEXT
+        tlsextctx tlsextcbp = {NULL, NULL, SSL_TLSEXT_ERR_ALERT_WARNING};
+#endif
 
 #if !defined(OPENSSL_NO_SSL2) && !defined(OPENSSL_NO_SSL3)
 	meth=SSLv23_server_method();
@@ -681,7 +915,7 @@ int MAIN(int argc, char *argv[])
 			{
 			vflags |= X509_V_FLAG_CRL_CHECK;
 			}
-		else if (strcmp(*argv,"-crl_check") == 0)
+		else if (strcmp(*argv,"-crl_check_all") == 0)
 			{
 			vflags |= X509_V_FLAG_CRL_CHECK|X509_V_FLAG_CRL_CHECK_ALL;
 			}
@@ -710,6 +944,37 @@ int MAIN(int argc, char *argv[])
 			}
 		else if	(strcmp(*argv,"-debug") == 0)
 			{ s_debug=1; }
+#ifndef OPENSSL_NO_TLSEXT
+		else if	(strcmp(*argv,"-tlsextdebug") == 0)
+			s_tlsextdebug=1;
+		else if	(strcmp(*argv,"-status") == 0)
+			s_tlsextstatus=1;
+		else if	(strcmp(*argv,"-status_verbose") == 0)
+			{
+			s_tlsextstatus=1;
+			tlscstatp.verbose = 1;
+			}
+		else if (!strcmp(*argv, "-status_timeout"))
+			{
+			s_tlsextstatus=1;
+                        if (--argc < 1) goto bad;
+			tlscstatp.timeout = atoi(*(++argv));
+			}
+		else if (!strcmp(*argv, "-status_url"))
+			{
+			s_tlsextstatus=1;
+                        if (--argc < 1) goto bad;
+			if (!OCSP_parse_url(*(++argv),
+					&tlscstatp.host,
+					&tlscstatp.port,
+					&tlscstatp.path,
+					&tlscstatp.use_ssl))
+				{
+				BIO_printf(bio_err, "Error parsing URL\n");
+				goto bad;
+				}
+			}
+#endif
 		else if	(strcmp(*argv,"-msg") == 0)
 			{ s_msg=1; }
 		else if	(strcmp(*argv,"-hack") == 0)
@@ -740,6 +1005,10 @@ int MAIN(int argc, char *argv[])
 			{ off|=SSL_OP_NO_SSLv3; }
 		else if	(strcmp(*argv,"-no_tls1") == 0)
 			{ off|=SSL_OP_NO_TLSv1; }
+#ifndef OPENSSL_NO_TLSEXT
+		else if	(strcmp(*argv,"-no_ticket") == 0)
+			{ off|=SSL_OP_NO_TICKET; }
+#endif
 #ifndef OPENSSL_NO_SSL2
 		else if	(strcmp(*argv,"-ssl2") == 0)
 			{ meth=SSLv2_server_method(); }
@@ -756,7 +1025,7 @@ int MAIN(int argc, char *argv[])
 		else if	(strcmp(*argv,"-dtls1") == 0)
 			{ 
 			meth=DTLSv1_server_method();
-			sock_type = SOCK_DGRAM;
+			socket_type = SOCK_DGRAM;
 			}
 		else if (strcmp(*argv,"-timeout") == 0)
 			enable_timeouts = 1;
@@ -785,6 +1054,33 @@ int MAIN(int argc, char *argv[])
 			if (--argc < 1) goto bad;
 			inrand= *(++argv);
 			}
+#ifndef OPENSSL_NO_TLSEXT
+		else if (strcmp(*argv,"-servername") == 0)
+			{
+			if (--argc < 1) goto bad;
+			tlsextcbp.servername= *(++argv);
+			}
+		else if (strcmp(*argv,"-servername_fatal") == 0)
+			{ tlsextcbp.extension_error = SSL_TLSEXT_ERR_ALERT_FATAL; }
+		else if	(strcmp(*argv,"-cert2") == 0)
+			{
+			if (--argc < 1) goto bad;
+			s_cert_file2= *(++argv);
+			}
+		else if	(strcmp(*argv,"-key2") == 0)
+			{
+			if (--argc < 1) goto bad;
+			s_key_file2= *(++argv);
+			}
+			
+#endif
+#ifndef OPENSSL_NO_JPAKE
+		else if (strcmp(*argv,"-jpake") == 0)
+			{
+			if (--argc < 1) goto bad;
+			jpake_secret = *(++argv);
+			}
+#endif
 		else
 			{
 			BIO_printf(bio_err,"unknown option %s\n",*argv);
@@ -817,24 +1113,52 @@ bad:
 
 	if (s_key_file == NULL)
 		s_key_file = s_cert_file;
+#ifndef OPENSSL_NO_TLSEXT
+	if (s_key_file2 == NULL)
+		s_key_file2 = s_cert_file2;
+#endif
 
-	s_key = load_key(bio_err, s_key_file, s_key_format, 0, pass, e,
-		       "server certificate private key file");
-	if (!s_key)
+	if (nocert == 0)
 		{
-		ERR_print_errors(bio_err);
-		goto end;
-		}
+		s_key = load_key(bio_err, s_key_file, s_key_format, 0, pass, e,
+		       "server certificate private key file");
+		if (!s_key)
+			{
+			ERR_print_errors(bio_err);
+			goto end;
+			}
 
-	s_cert = load_cert(bio_err,s_cert_file,s_cert_format,
+		s_cert = load_cert(bio_err,s_cert_file,s_cert_format,
 			NULL, e, "server certificate file");
 
-	if (!s_cert)
-		{
-		ERR_print_errors(bio_err);
-		goto end;
-		}
+		if (!s_cert)
+			{
+			ERR_print_errors(bio_err);
+			goto end;
+			}
 
+#ifndef OPENSSL_NO_TLSEXT
+		if (tlsextcbp.servername) 
+			{
+			s_key2 = load_key(bio_err, s_key_file2, s_key_format, 0, pass, e,
+				"second server certificate private key file");
+			if (!s_key2)
+				{
+				ERR_print_errors(bio_err);
+				goto end;
+				}
+			
+			s_cert2 = load_cert(bio_err,s_cert_file2,s_cert_format,
+				NULL, e, "second server certificate file");
+			
+			if (!s_cert2)
+				{
+				ERR_print_errors(bio_err);
+				goto end;
+				}
+			}
+#endif
+		}
 	if (s_dcert_file)
 		{
 
@@ -891,6 +1215,10 @@ bad:
 		s_key_file=NULL;
 		s_dcert_file=NULL;
 		s_dkey_file=NULL;
+#ifndef OPENSSL_NO_TLSEXT
+		s_cert_file2=NULL;
+		s_key_file2=NULL;
+#endif
 		}
 
 	ctx=SSL_CTX_new(meth);
@@ -922,7 +1250,7 @@ bad:
 	/* DTLS: partial reads end up discarding unread UDP bytes :-( 
 	 * Setting read ahead solves this problem.
 	 */
-	if (sock_type == SOCK_DGRAM) SSL_CTX_set_read_ahead(ctx, 1);
+	if (socket_type == SOCK_DGRAM) SSL_CTX_set_read_ahead(ctx, 1);
 
 	if (state) SSL_CTX_set_info_callback(ctx,apps_ssl_info_callback);
 
@@ -949,6 +1277,62 @@ bad:
 		}
 	store = SSL_CTX_get_cert_store(ctx);
 	X509_STORE_set_flags(store, vflags);
+#ifndef OPENSSL_NO_TLSEXT
+	if (s_cert2)
+		{
+		ctx2=SSL_CTX_new(meth);
+		if (ctx2 == NULL)
+			{
+			ERR_print_errors(bio_err);
+			goto end;
+			}
+		}
+	
+	if (ctx2)
+		{
+		BIO_printf(bio_s_out,"Setting secondary ctx parameters\n");
+
+		if (session_id_prefix)
+			{
+			if(strlen(session_id_prefix) >= 32)
+				BIO_printf(bio_err,
+					"warning: id_prefix is too long, only one new session will be possible\n");
+			else if(strlen(session_id_prefix) >= 16)
+				BIO_printf(bio_err,
+					"warning: id_prefix is too long if you use SSLv2\n");
+			if(!SSL_CTX_set_generate_session_id(ctx2, generate_session_id))
+				{
+				BIO_printf(bio_err,"error setting 'id_prefix'\n");
+				ERR_print_errors(bio_err);
+				goto end;
+				}
+			BIO_printf(bio_err,"id_prefix '%s' set.\n", session_id_prefix);
+			}
+		SSL_CTX_set_quiet_shutdown(ctx2,1);
+		if (bugs) SSL_CTX_set_options(ctx2,SSL_OP_ALL);
+		if (hack) SSL_CTX_set_options(ctx2,SSL_OP_NETSCAPE_DEMO_CIPHER_CHANGE_BUG);
+		SSL_CTX_set_options(ctx2,off);
+
+		/* DTLS: partial reads end up discarding unread UDP bytes :-( 
+		 * Setting read ahead solves this problem.
+		 */
+		if (socket_type == SOCK_DGRAM) SSL_CTX_set_read_ahead(ctx2, 1);
+
+
+		if (state) SSL_CTX_set_info_callback(ctx2,apps_ssl_info_callback);
+
+		SSL_CTX_sess_set_cache_size(ctx2,128);
+
+		if ((!SSL_CTX_load_verify_locations(ctx2,CAfile,CApath)) ||
+			(!SSL_CTX_set_default_verify_paths(ctx2)))
+			{
+			ERR_print_errors(bio_err);
+			}
+		store = SSL_CTX_get_cert_store(ctx2);
+		X509_STORE_set_flags(store, vflags);
+		}
+#endif 
+
 
 #ifndef OPENSSL_NO_DH
 	if (!no_dhe)
@@ -972,6 +1356,24 @@ bad:
 		(void)BIO_flush(bio_s_out);
 
 		SSL_CTX_set_tmp_dh(ctx,dh);
+#ifndef OPENSSL_NO_TLSEXT
+		if (ctx2)
+			{
+			if (!dhfile)
+				{ 
+				DH *dh2=load_dh_param(s_cert_file2);
+				if (dh2 != NULL)
+					{
+					BIO_printf(bio_s_out,"Setting temp DH parameters\n");
+					(void)BIO_flush(bio_s_out);
+
+					DH_free(dh);
+					dh = dh2;
+					}
+				}
+			SSL_CTX_set_tmp_dh(ctx2,dh);
+			}
+#endif
 		DH_free(dh);
 		}
 #endif
@@ -981,13 +1383,6 @@ bad:
 		{
 		EC_KEY *ecdh=NULL;
 
-		ecdh = EC_KEY_new();
-		if (ecdh == NULL)
-			{
-			BIO_printf(bio_err,"Could not create ECDH struct.\n");
-			goto end;
-			}
-
 		if (named_curve)
 			{
 			int nid = OBJ_sn2nid(named_curve);
@@ -998,9 +1393,8 @@ bad:
 					named_curve);
 				goto end;
 				}
-
-			ecdh->group = EC_GROUP_new_by_nid(nid);
-			if (ecdh->group == NULL)
+			ecdh = EC_KEY_new_by_curve_name(nid);
+			if (ecdh == NULL)
 				{
 				BIO_printf(bio_err, "unable to create curve (%s)\n", 
 					named_curve);
@@ -1008,15 +1402,15 @@ bad:
 				}
 			}
 
-		if (ecdh->group != NULL)
+		if (ecdh != NULL)
 			{
 			BIO_printf(bio_s_out,"Setting temp ECDH parameters\n");
 			}
 		else
 			{
 			BIO_printf(bio_s_out,"Using default temp ECDH parameters\n");
-			ecdh->group=EC_GROUP_new_by_nid(NID_sect163r2);
-			if (ecdh->group == NULL) 
+			ecdh = EC_KEY_new_by_curve_name(NID_sect163r2);
+			if (ecdh == NULL) 
 				{
 				BIO_printf(bio_err, "unable to create curve (sect163r2)\n");
 				goto end;
@@ -1025,12 +1419,20 @@ bad:
 		(void)BIO_flush(bio_s_out);
 
 		SSL_CTX_set_tmp_ecdh(ctx,ecdh);
+#ifndef OPENSSL_NO_TLSEXT
+		if (ctx2) 
+			SSL_CTX_set_tmp_ecdh(ctx2,ecdh);
+#endif
 		EC_KEY_free(ecdh);
 		}
 #endif
 	
 	if (!set_cert_key_stuff(ctx,s_cert,s_key))
 		goto end;
+#ifndef OPENSSL_NO_TLSEXT
+	if (ctx2 && !set_cert_key_stuff(ctx2,s_cert2,s_key2))
+		goto end; 
+#endif
 	if (s_dcert != NULL)
 		{
 		if (!set_cert_key_stuff(ctx,s_dcert,s_dkey))
@@ -1040,7 +1442,13 @@ bad:
 #ifndef OPENSSL_NO_RSA
 #if 1
 	if (!no_tmp_rsa)
+		{
 		SSL_CTX_set_tmp_rsa_callback(ctx,tmp_rsa_cb);
+#ifndef OPENSSL_NO_TLSEXT
+		if (ctx2) 
+			SSL_CTX_set_tmp_rsa_callback(ctx2,tmp_rsa_cb);
+#endif	
+		}
 #else
 	if (!no_tmp_rsa && SSL_CTX_need_tmp_RSA(ctx))
 		{
@@ -1056,6 +1464,16 @@ bad:
 			ERR_print_errors(bio_err);
 			goto end;
 			}
+#ifndef OPENSSL_NO_TLSEXT
+			if (ctx2)
+				{
+				if (!SSL_CTX_set_tmp_rsa(ctx2,rsa))
+					{
+					ERR_print_errors(bio_err);
+					goto end;
+					}
+				}
+#endif
 		RSA_free(rsa);
 		BIO_printf(bio_s_out,"\n");
 		}
@@ -1067,19 +1485,46 @@ bad:
 		BIO_printf(bio_err,"error setting cipher list\n");
 		ERR_print_errors(bio_err);
 		goto end;
+#ifndef OPENSSL_NO_TLSEXT
+		if (ctx2 && !SSL_CTX_set_cipher_list(ctx2,cipher))
+			{
+			BIO_printf(bio_err,"error setting cipher list\n");
+			ERR_print_errors(bio_err);
+			goto end;
+			}
+#endif
 	}
 	SSL_CTX_set_verify(ctx,s_server_verify,verify_callback);
 	SSL_CTX_set_session_id_context(ctx,(void*)&s_server_session_id_context,
 		sizeof s_server_session_id_context);
 
-	if (CAfile != NULL)
-	    SSL_CTX_set_client_CA_list(ctx,SSL_load_client_CA_file(CAfile));
+#ifndef OPENSSL_NO_TLSEXT
+	if (ctx2)
+		{
+		SSL_CTX_set_verify(ctx2,s_server_verify,verify_callback);
+		SSL_CTX_set_session_id_context(ctx2,(void*)&s_server_session_id_context,
+			sizeof s_server_session_id_context);
 
+		tlsextcbp.biodebug = bio_s_out;
+		SSL_CTX_set_tlsext_servername_callback(ctx2, ssl_servername_cb);
+		SSL_CTX_set_tlsext_servername_arg(ctx2, &tlsextcbp);
+		SSL_CTX_set_tlsext_servername_callback(ctx, ssl_servername_cb);
+		SSL_CTX_set_tlsext_servername_arg(ctx, &tlsextcbp);
+		}
+#endif
+	if (CAfile != NULL)
+		{
+		SSL_CTX_set_client_CA_list(ctx,SSL_load_client_CA_file(CAfile));
+#ifndef OPENSSL_NO_TLSEXT
+		if (ctx2) 
+			SSL_CTX_set_client_CA_list(ctx2,SSL_load_client_CA_file(CAfile));
+#endif
+		}
 	BIO_printf(bio_s_out,"ACCEPT\n");
 	if (www)
-		do_server(port,sock_type,&accept_socket,www_body, context);
+		do_server(port,socket_type,&accept_socket,www_body, context);
 	else
-		do_server(port,sock_type,&accept_socket,sv_body, context);
+		do_server(port,socket_type,&accept_socket,sv_body, context);
 	print_stats(bio_s_out,ctx);
 	ret=0;
 end:
@@ -1096,6 +1541,13 @@ end:
 		OPENSSL_free(pass);
 	if (dpass)
 		OPENSSL_free(dpass);
+#ifndef OPENSSL_NO_TLSEXT
+	if (ctx2 != NULL) SSL_CTX_free(ctx2);
+	if (s_cert2)
+		X509_free(s_cert2);
+	if (s_key2)
+		EVP_PKEY_free(s_key2);
+#endif
 	if (bio_s_out != NULL)
 		{
         BIO_free(bio_s_out);
@@ -1162,6 +1614,19 @@ static int sv_body(char *hostname, int s, unsigned char *context)
 
 	if (con == NULL) {
 		con=SSL_new(ctx);
+#ifndef OPENSSL_NO_TLSEXT
+	if (s_tlsextdebug)
+		{
+		SSL_set_tlsext_debug_callback(con, tlsext_cb);
+		SSL_set_tlsext_debug_arg(con, bio_s_out);
+		}
+	if (s_tlsextstatus)
+		{
+		SSL_CTX_set_tlsext_status_cb(ctx, cert_status_cb);
+		tlscstatp.err = bio_err;
+		SSL_CTX_set_tlsext_status_arg(ctx, &tlscstatp);
+		}
+#endif
 #ifndef OPENSSL_NO_KRB5
 		if ((con->kssl_ctx = kssl_ctx_new()) != NULL)
                         {
@@ -1217,6 +1682,11 @@ static int sv_body(char *hostname, int s, unsigned char *context)
 		test=BIO_new(BIO_f_nbio_test());
 		sbio=BIO_push(test,sbio);
 		}
+#ifndef OPENSSL_NO_JPAKE
+	if(jpake_secret)
+		jpake_server_auth(bio_s_out, sbio, jpake_secret);
+#endif
+
 	SSL_set_bio(con,sbio,sbio);
 	SSL_set_accept_state(con);
 	/* SSL_set_fd(con,s); */
@@ -1225,13 +1695,20 @@ static int sv_body(char *hostname, int s, unsigned char *context)
 		{
 		con->debug=1;
 		BIO_set_callback(SSL_get_rbio(con),bio_dump_callback);
-		BIO_set_callback_arg(SSL_get_rbio(con),bio_s_out);
+		BIO_set_callback_arg(SSL_get_rbio(con),(char *)bio_s_out);
 		}
 	if (s_msg)
 		{
 		SSL_set_msg_callback(con, msg_cb);
 		SSL_set_msg_callback_arg(con, bio_s_out);
 		}
+#ifndef OPENSSL_NO_TLSEXT
+	if (s_tlsextdebug)
+		{
+		SSL_set_tlsext_debug_callback(con, tlsext_cb);
+		SSL_set_tlsext_debug_arg(con, bio_s_out);
+		}
+#endif
 
 	width=s+1;
 	for (;;)
@@ -1597,6 +2074,13 @@ static int www_body(char *hostname, int s, unsigned char *context)
 	if (!BIO_set_write_buffer_size(io,bufsize)) goto err;
 
 	if ((con=SSL_new(ctx)) == NULL) goto err;
+#ifndef OPENSSL_NO_TLSEXT
+		if (s_tlsextdebug)
+			{
+			SSL_set_tlsext_debug_callback(con, tlsext_cb);
+			SSL_set_tlsext_debug_arg(con, bio_s_out);
+			}
+#endif
 #ifndef OPENSSL_NO_KRB5
 	if ((con->kssl_ctx = kssl_ctx_new()) != NULL)
 		{
@@ -1629,7 +2113,7 @@ static int www_body(char *hostname, int s, unsigned char *context)
 		{
 		con->debug=1;
 		BIO_set_callback(SSL_get_rbio(con),bio_dump_callback);
-		BIO_set_callback_arg(SSL_get_rbio(con),bio_s_out);
+		BIO_set_callback_arg(SSL_get_rbio(con),(char *)bio_s_out);
 		}
 	if (s_msg)
 		{

apps/s_socket.c

@@ -87,8 +87,12 @@ typedef unsigned int u_int;
 
 #ifndef OPENSSL_NO_SOCK
 
+#if defined(OPENSSL_SYS_NETWARE) && defined(NETWARE_BSDSOCK)
+#include "netdb.h"
+#endif
+
 static struct hostent *GetHostByName(char *name);
-#if defined(OPENSSL_SYS_WINDOWS) || defined(OPENSSL_SYS_NETWARE)
+#if defined(OPENSSL_SYS_WINDOWS) || (defined(OPENSSL_SYS_NETWARE) && !defined(NETWARE_BSDSOCK))
 static void ssl_sock_cleanup(void);
 #endif
 static int ssl_sock_init(void);
@@ -104,7 +108,7 @@ static int host_ip(char *str, unsigned char ip[4]);
 #define SOCKET_PROTOCOL	IPPROTO_TCP
 #endif
 
-#ifdef OPENSSL_SYS_NETWARE
+#if defined(OPENSSL_SYS_NETWARE) && !defined(NETWARE_BSDSOCK)
 static int wsa_init_done=0;
 #endif
 
@@ -156,7 +160,7 @@ static void ssl_sock_cleanup(void)
 		WSACleanup();
 		}
 	}
-#elif defined(OPENSSL_SYS_NETWARE)
+#elif defined(OPENSSL_SYS_NETWARE) && !defined(NETWARE_BSDSOCK)
 static void sock_cleanup(void)
     {
     if (wsa_init_done)
@@ -199,7 +203,7 @@ static int ssl_sock_init(void)
 		SetWindowLong(topWnd,GWL_WNDPROC,(LONG)lpTopHookProc);
 #endif /* OPENSSL_SYS_WIN16 */
 		}
-#elif defined(OPENSSL_SYS_NETWARE)
+#elif defined(OPENSSL_SYS_NETWARE) && !defined(NETWARE_BSDSOCK)
    WORD wVerReq;
    WSADATA wsaData;
    int err;
@@ -398,7 +402,7 @@ redoit:
 	ret=accept(acc_sock,(struct sockaddr *)&from,(void *)&len);
 	if (ret == INVALID_SOCKET)
 		{
-#if defined(OPENSSL_SYS_WINDOWS) || defined(OPENSSL_SYS_NETWARE)
+#if defined(OPENSSL_SYS_WINDOWS) || (defined(OPENSSL_SYS_NETWARE) && !defined(NETWARE_BSDSOCK))
 		i=WSAGetLastError();
 		BIO_printf(bio_err,"accept error %d\n",i);
 #else

apps/smime.c

@@ -1,5 +1,5 @@
 /* smime.c */
-/* Written by Dr Stephen N Henson (shenson@bigfoot.com) for the OpenSSL
+/* Written by Dr Stephen N Henson (steve@openssl.org) for the OpenSSL
  * project.
  */
 /* ====================================================================
@@ -145,6 +145,10 @@ int MAIN(int argc, char **argv)
 		else if (!strcmp (*args, "-des")) 
 				cipher = EVP_des_cbc();
 #endif
+#ifndef OPENSSL_NO_SEED
+		else if (!strcmp (*args, "-seed")) 
+				cipher = EVP_seed_cbc();
+#endif
 #ifndef OPENSSL_NO_RC2
 		else if (!strcmp (*args, "-rc2-40")) 
 				cipher = EVP_rc2_40_cbc();
@@ -160,6 +164,14 @@ int MAIN(int argc, char **argv)
 				cipher = EVP_aes_192_cbc();
 		else if (!strcmp(*args,"-aes256"))
 				cipher = EVP_aes_256_cbc();
+#endif
+#ifndef OPENSSL_NO_CAMELLIA
+		else if (!strcmp(*args,"-camellia128"))
+				cipher = EVP_camellia_128_cbc();
+		else if (!strcmp(*args,"-camellia192"))
+				cipher = EVP_camellia_192_cbc();
+		else if (!strcmp(*args,"-camellia256"))
+				cipher = EVP_camellia_256_cbc();
 #endif
 		else if (!strcmp (*args, "-text")) 
 				flags |= PKCS7_TEXT;
@@ -384,9 +396,9 @@ int MAIN(int argc, char **argv)
 		}
 	else if (operation == SMIME_DECRYPT)
 		{
-		if (!recipfile)
+		if (!recipfile && !keyfile)
 			{
-			BIO_printf(bio_err, "No recipient certificate and key specified\n");
+			BIO_printf(bio_err, "No recipient certificate or key specified\n");
 			badarg = 1;
 			}
 		}
@@ -415,6 +427,9 @@ int MAIN(int argc, char **argv)
 		BIO_printf (bio_err, "-des3          encrypt with triple DES\n");
 		BIO_printf (bio_err, "-des           encrypt with DES\n");
 #endif
+#ifndef OPENSSL_NO_SEED
+		BIO_printf (bio_err, "-seed          encrypt with SEED\n");
+#endif
 #ifndef OPENSSL_NO_RC2
 		BIO_printf (bio_err, "-rc2-40        encrypt with RC2-40 (default)\n");
 		BIO_printf (bio_err, "-rc2-64        encrypt with RC2-64\n");
@@ -423,6 +438,10 @@ int MAIN(int argc, char **argv)
 #ifndef OPENSSL_NO_AES
 		BIO_printf (bio_err, "-aes128, -aes192, -aes256\n");
 		BIO_printf (bio_err, "               encrypt PEM output with cbc aes\n");
+#endif
+#ifndef OPENSSL_NO_CAMELLIA
+		BIO_printf (bio_err, "-camellia128, -camellia192, -camellia256\n");
+		BIO_printf (bio_err, "               encrypt PEM output with cbc camellia\n");
 #endif
 		BIO_printf (bio_err, "-nointern      don't search certificates in message for signer\n");
 		BIO_printf (bio_err, "-nosigs        don't verify message signature\n");
@@ -638,12 +657,6 @@ int MAIN(int argc, char **argv)
 		if ((flags & PKCS7_DETACHED) && (outformat == FORMAT_SMIME))
 			flags |= PKCS7_STREAM;
 		p7 = PKCS7_sign(signer, key, other, in, flags);
-		/* Don't need to rewind for partial signing */
-		if (!(flags & PKCS7_STREAM) && (BIO_reset(in) != 0))
-			{
-			BIO_printf(bio_err, "Can't rewind input file\n");
-			goto end;
-			}
 		}
 	else
 		{

apps/speed.c

@@ -164,6 +164,9 @@
 #ifndef OPENSSL_NO_AES
 #include <openssl/aes.h>
 #endif
+#ifndef OPENSSL_NO_CAMELLIA
+#include <openssl/camellia.h>
+#endif
 #ifndef OPENSSL_NO_MD2
 #include <openssl/md2.h>
 #endif
@@ -198,6 +201,9 @@
 #ifndef OPENSSL_NO_IDEA
 #include <openssl/idea.h>
 #endif
+#ifndef OPENSSL_NO_SEED
+#include <openssl/seed.h>
+#endif
 #ifndef OPENSSL_NO_BF
 #include <openssl/blowfish.h>
 #endif
@@ -269,7 +275,7 @@ static void print_result(int alg,int run_no,int count,double time_used);
 static int do_multi(int multi);
 #endif
 
-#define ALGOR_NUM	21
+#define ALGOR_NUM	28
 #define SIZE_NUM	5
 #define RSA_NUM		4
 #define DSA_NUM		3
@@ -279,16 +285,27 @@ static int do_multi(int multi);
 
 static const char *names[ALGOR_NUM]={
   "md2","mdc2","md4","md5","hmac(md5)","sha1","rmd160","rc4",
-  "des cbc","des ede3","idea cbc",
+  "des cbc","des ede3","idea cbc","seed cbc",
   "rc2 cbc","rc5-32/12 cbc","blowfish cbc","cast cbc",
-  "aes-128 cbc","aes-192 cbc","aes-256 cbc","evp","sha256","sha512"};
+  "aes-128 cbc","aes-192 cbc","aes-256 cbc",
+  "camellia-128 cbc","camellia-192 cbc","camellia-256 cbc",
+  "evp","sha256","sha512",
+  "aes-128 ige","aes-192 ige","aes-256 ige"};
 static double results[ALGOR_NUM][SIZE_NUM];
 static int lengths[SIZE_NUM]={16,64,256,1024,8*1024};
 static double rsa_results[RSA_NUM][2];
 static double dsa_results[DSA_NUM][2];
+#ifndef OPENSSL_NO_ECDSA
 static double ecdsa_results[EC_NUM][2];
+#endif
+#ifndef OPENSSL_NO_ECDH
 static double ecdh_results[EC_NUM][1];
+#endif
 
+#if defined(OPENSSL_NO_DSA) && !(defined(OPENSSL_NO_ECDSA) && defined(OPENSSL_NO_ECDH))
+static const char rnd_seed[] = "string to make the random number generator think it has entropy";
+static int rnd_fake = 0;
+#endif
 
 #ifdef SIGALRM
 #if defined(__STDC__) || defined(sgi) || defined(_AIX)
@@ -448,6 +465,7 @@ static double Time_F(int s)
 #endif /* if defined(OPENSSL_SYS_NETWARE) */
 
 
+#ifndef OPENSSL_NO_ECDH
 static const int KDF1_SHA1_len = 20;
 static void *KDF1_SHA1(const void *in, size_t inlen, void *out, size_t *outlen)
 	{
@@ -459,8 +477,9 @@ static void *KDF1_SHA1(const void *in, size_t inlen, void *out, size_t *outlen)
 	return SHA1(in, inlen, out);
 #else
 	return NULL;
-#endif
+#endif	/* OPENSSL_NO_SHA */
 	}
+#endif	/* OPENSSL_NO_ECDH */
 
 
 int MAIN(int, char **);
@@ -496,9 +515,13 @@ int MAIN(int argc, char **argv)
 #endif
 #ifndef OPENSSL_NO_SHA
 	unsigned char sha[SHA_DIGEST_LENGTH];
+#ifndef OPENSSL_NO_SHA256
 	unsigned char sha256[SHA256_DIGEST_LENGTH];
+#endif
+#ifndef OPENSSL_NO_SHA512
 	unsigned char sha512[SHA512_DIGEST_LENGTH];
 #endif
+#endif
 #ifndef OPENSSL_NO_RIPEMD
 	unsigned char rmd160[RIPEMD160_DIGEST_LENGTH];
 #endif
@@ -514,6 +537,9 @@ int MAIN(int argc, char **argv)
 #ifndef OPENSSL_NO_IDEA
 	IDEA_KEY_SCHEDULE idea_ks;
 #endif
+#ifndef OPENSSL_NO_SEED
+	SEED_KEY_SCHEDULE seed_ks;
+#endif
 #ifndef OPENSSL_NO_BF
 	BF_KEY bf_ks;
 #endif
@@ -523,6 +549,7 @@ int MAIN(int argc, char **argv)
 	static const unsigned char key16[16]=
 		{0x12,0x34,0x56,0x78,0x9a,0xbc,0xde,0xf0,
 		 0x34,0x56,0x78,0x9a,0xbc,0xde,0xf0,0x12};
+#ifndef OPENSSL_NO_AES
 	static const unsigned char key24[24]=
 		{0x12,0x34,0x56,0x78,0x9a,0xbc,0xde,0xf0,
 		 0x34,0x56,0x78,0x9a,0xbc,0xde,0xf0,0x12,
@@ -532,13 +559,25 @@ int MAIN(int argc, char **argv)
 		 0x34,0x56,0x78,0x9a,0xbc,0xde,0xf0,0x12,
 		 0x56,0x78,0x9a,0xbc,0xde,0xf0,0x12,0x34,
 		 0x78,0x9a,0xbc,0xde,0xf0,0x12,0x34,0x56};
+#endif
+#ifndef OPENSSL_NO_CAMELLIA
+	static const unsigned char ckey24[24]=
+		{0x12,0x34,0x56,0x78,0x9a,0xbc,0xde,0xf0,
+		 0x34,0x56,0x78,0x9a,0xbc,0xde,0xf0,0x12,
+		 0x56,0x78,0x9a,0xbc,0xde,0xf0,0x12,0x34};
+	static const unsigned char ckey32[32]=
+		{0x12,0x34,0x56,0x78,0x9a,0xbc,0xde,0xf0,
+		 0x34,0x56,0x78,0x9a,0xbc,0xde,0xf0,0x12,
+		 0x56,0x78,0x9a,0xbc,0xde,0xf0,0x12,0x34,
+		 0x78,0x9a,0xbc,0xde,0xf0,0x12,0x34,0x56};
+#endif
 #ifndef OPENSSL_NO_AES
 #define MAX_BLOCK_SIZE 128
 #else
 #define MAX_BLOCK_SIZE 64
 #endif
 	unsigned char DES_iv[8];
-	unsigned char iv[MAX_BLOCK_SIZE/8];
+	unsigned char iv[2*MAX_BLOCK_SIZE/8];
 #ifndef OPENSSL_NO_DES
 	DES_cblock *buf_as_des_cblock = NULL;
 	static DES_cblock key ={0x12,0x34,0x56,0x78,0x9a,0xbc,0xde,0xf0};
@@ -551,6 +590,9 @@ int MAIN(int argc, char **argv)
 #ifndef OPENSSL_NO_AES
 	AES_KEY aes_ks1, aes_ks2, aes_ks3;
 #endif
+#ifndef OPENSSL_NO_CAMELLIA
+	CAMELLIA_KEY camellia_ks1, camellia_ks2, camellia_ks3;
+#endif
 #define	D_MD2		0
 #define	D_MDC2		1
 #define	D_MD4		2
@@ -562,16 +604,23 @@ int MAIN(int argc, char **argv)
 #define	D_CBC_DES	8
 #define	D_EDE3_DES	9
 #define	D_CBC_IDEA	10
-#define	D_CBC_RC2	11
-#define	D_CBC_RC5	12
-#define	D_CBC_BF	13
-#define	D_CBC_CAST	14
-#define D_CBC_128_AES	15
-#define D_CBC_192_AES	16
-#define D_CBC_256_AES	17
-#define D_EVP		18
-#define D_SHA256	19
-#define D_SHA512	20
+#define	D_CBC_SEED	11
+#define	D_CBC_RC2	12
+#define	D_CBC_RC5	13
+#define	D_CBC_BF	14
+#define	D_CBC_CAST	15
+#define D_CBC_128_AES	16
+#define D_CBC_192_AES	17
+#define D_CBC_256_AES	18
+#define D_CBC_128_CML   19 
+#define D_CBC_192_CML   20
+#define D_CBC_256_CML   21 
+#define D_EVP		22
+#define D_SHA256	23	
+#define D_SHA512	24
+#define D_IGE_128_AES   25
+#define D_IGE_192_AES   26
+#define D_IGE_256_AES   27
 	double d=0.0;
 	long c[ALGOR_NUM][SIZE_NUM];
 #define	R_DSA_512	0
@@ -689,8 +738,12 @@ int MAIN(int argc, char **argv)
 
 	int rsa_doit[RSA_NUM];
 	int dsa_doit[DSA_NUM];
+#ifndef OPENSSL_NO_ECDSA
 	int ecdsa_doit[EC_NUM];
+#endif
+#ifndef OPENSSL_NO_ECDH
         int ecdh_doit[EC_NUM];
+#endif
 	int doit[ALGOR_NUM];
 	int pr_header=0;
 	const EVP_CIPHER *evp_cipher=NULL;
@@ -878,11 +931,15 @@ int MAIN(int argc, char **argv)
 							doit[D_SHA256]=1,
 							doit[D_SHA512]=1;
 		else
+#ifndef OPENSSL_NO_SHA256
 			if (strcmp(*argv,"sha256") == 0) doit[D_SHA256]=1;
 		else
+#endif
+#ifndef OPENSSL_NO_SHA512
 			if (strcmp(*argv,"sha512") == 0) doit[D_SHA512]=1;
 		else
 #endif
+#endif
 #ifndef OPENSSL_NO_RIPEMD
 			if (strcmp(*argv,"ripemd") == 0) doit[D_RMD160]=1;
 		else
@@ -904,6 +961,15 @@ int MAIN(int argc, char **argv)
 			if (strcmp(*argv,"aes-128-cbc") == 0) doit[D_CBC_128_AES]=1;
 		else	if (strcmp(*argv,"aes-192-cbc") == 0) doit[D_CBC_192_AES]=1;
 		else	if (strcmp(*argv,"aes-256-cbc") == 0) doit[D_CBC_256_AES]=1;
+		else    if (strcmp(*argv,"aes-128-ige") == 0) doit[D_IGE_128_AES]=1;
+		else	if (strcmp(*argv,"aes-192-ige") == 0) doit[D_IGE_192_AES]=1;
+		else	if (strcmp(*argv,"aes-256-ige") == 0) doit[D_IGE_256_AES]=1;
+                else
+#endif
+#ifndef OPENSSL_NO_CAMELLIA
+			if (strcmp(*argv,"camellia-128-cbc") == 0) doit[D_CBC_128_CML]=1;
+		else    if (strcmp(*argv,"camellia-192-cbc") == 0) doit[D_CBC_192_CML]=1;
+		else    if (strcmp(*argv,"camellia-256-cbc") == 0) doit[D_CBC_256_CML]=1;
 		else
 #endif
 #ifndef OPENSSL_NO_RSA
@@ -947,6 +1013,11 @@ int MAIN(int argc, char **argv)
 		else if (strcmp(*argv,"idea") == 0) doit[D_CBC_IDEA]=1;
 		else
 #endif
+#ifndef OPENSSL_NO_SEED
+		     if (strcmp(*argv,"seed-cbc") == 0) doit[D_CBC_SEED]=1;
+		else if (strcmp(*argv,"seed") == 0) doit[D_CBC_SEED]=1;
+		else
+#endif
 #ifndef OPENSSL_NO_BF
 		     if (strcmp(*argv,"bf-cbc") == 0) doit[D_CBC_BF]=1;
 		else if (strcmp(*argv,"blowfish") == 0) doit[D_CBC_BF]=1;
@@ -976,6 +1047,15 @@ int MAIN(int argc, char **argv)
 			}
 		else
 #endif
+#ifndef OPENSSL_NO_CAMELLIA
+			if (strcmp(*argv,"camellia") == 0)
+			{
+			doit[D_CBC_128_CML]=1;
+			doit[D_CBC_192_CML]=1;
+			doit[D_CBC_256_CML]=1;
+			}
+		else
+#endif
 #ifndef OPENSSL_NO_RSA
 			if (strcmp(*argv,"rsa") == 0)
 			{
@@ -1064,8 +1144,12 @@ int MAIN(int argc, char **argv)
 #endif
 #ifndef OPENSSL_NO_SHA1
 			BIO_printf(bio_err,"sha1     ");
-			BIO_printf(bio_err,"sha256  ");
-			BIO_printf(bio_err,"sha512  ");
+#endif
+#ifndef OPENSSL_NO_SHA256
+			BIO_printf(bio_err,"sha256   ");
+#endif
+#ifndef OPENSSL_NO_SHA512
+			BIO_printf(bio_err,"sha512   ");
 #endif
 #ifndef OPENSSL_NO_RIPEMD160
 			BIO_printf(bio_err,"rmd160");
@@ -1079,6 +1163,9 @@ int MAIN(int argc, char **argv)
 #ifndef OPENSSL_NO_IDEA
 			BIO_printf(bio_err,"idea-cbc ");
 #endif
+#ifndef OPENSSL_NO_SEED
+			BIO_printf(bio_err,"seed-cbc ");
+#endif
 #ifndef OPENSSL_NO_RC2
 			BIO_printf(bio_err,"rc2-cbc  ");
 #endif
@@ -1088,7 +1175,7 @@ int MAIN(int argc, char **argv)
 #ifndef OPENSSL_NO_BF
 			BIO_printf(bio_err,"bf-cbc");
 #endif
-#if !defined(OPENSSL_NO_IDEA) || !defined(OPENSSL_NO_RC2) || \
+#if !defined(OPENSSL_NO_IDEA) || !defined(OPENSSL_NO_SEED) || !defined(OPENSSL_NO_RC2) || \
     !defined(OPENSSL_NO_BF) || !defined(OPENSSL_NO_RC5)
 			BIO_printf(bio_err,"\n");
 #endif
@@ -1097,6 +1184,11 @@ int MAIN(int argc, char **argv)
 #endif
 #ifndef OPENSSL_NO_AES
 			BIO_printf(bio_err,"aes-128-cbc aes-192-cbc aes-256-cbc ");
+			BIO_printf(bio_err,"aes-128-ige aes-192-ige aes-256-ige ");
+#endif
+#ifndef OPENSSL_NO_CAMELLIA
+			BIO_printf(bio_err,"\n");
+			BIO_printf(bio_err,"camellia-128-cbc camellia-192-cbc camellia-256-cbc ");
 #endif
 #ifndef OPENSSL_NO_RC4
 			BIO_printf(bio_err,"rc4");
@@ -1126,6 +1218,9 @@ int MAIN(int argc, char **argv)
 #ifndef OPENSSL_NO_IDEA
 			BIO_printf(bio_err,"idea     ");
 #endif
+#ifndef OPENSSL_NO_SEED
+			BIO_printf(bio_err,"seed     ");
+#endif
 #ifndef OPENSSL_NO_RC2
 			BIO_printf(bio_err,"rc2      ");
 #endif
@@ -1135,15 +1230,19 @@ int MAIN(int argc, char **argv)
 #ifndef OPENSSL_NO_AES
 			BIO_printf(bio_err,"aes      ");
 #endif
+#ifndef OPENSSL_NO_CAMELLIA
+			BIO_printf(bio_err,"camellia ");
+#endif
 #ifndef OPENSSL_NO_RSA
 			BIO_printf(bio_err,"rsa      ");
 #endif
 #ifndef OPENSSL_NO_BF
 			BIO_printf(bio_err,"blowfish");
 #endif
-#if !defined(OPENSSL_NO_IDEA) || !defined(OPENSSL_NO_RC2) || \
-    !defined(OPENSSL_NO_DES) || !defined(OPENSSL_NO_RSA) || \
-    !defined(OPENSSL_NO_BF) || !defined(OPENSSL_NO_AES)
+#if !defined(OPENSSL_NO_IDEA) || !defined(OPENSSL_NO_SEED) || \
+    !defined(OPENSSL_NO_RC2) || !defined(OPENSSL_NO_DES) || \
+    !defined(OPENSSL_NO_RSA) || !defined(OPENSSL_NO_BF) || \
+    !defined(OPENSSL_NO_AES) || !defined(OPENSSL_NO_CAMELLIA)
 			BIO_printf(bio_err,"\n");
 #endif
 
@@ -1237,9 +1336,17 @@ int MAIN(int argc, char **argv)
 	AES_set_encrypt_key(key24,192,&aes_ks2);
 	AES_set_encrypt_key(key32,256,&aes_ks3);
 #endif
+#ifndef OPENSSL_NO_CAMELLIA
+	Camellia_set_key(key16,128,&camellia_ks1);
+	Camellia_set_key(ckey24,192,&camellia_ks2);
+	Camellia_set_key(ckey32,256,&camellia_ks3);
+#endif
 #ifndef OPENSSL_NO_IDEA
 	idea_set_encrypt_key(key16,&idea_ks);
 #endif
+#ifndef OPENSSL_NO_SEED
+	SEED_set_key(key16,&seed_ks);
+#endif
 #ifndef OPENSSL_NO_RC4
 	RC4_set_key(&rc4_ks,16,key16);
 #endif
@@ -1283,6 +1390,7 @@ int MAIN(int argc, char **argv)
 	c[D_CBC_DES][0]=count;
 	c[D_EDE3_DES][0]=count/3;
 	c[D_CBC_IDEA][0]=count;
+	c[D_CBC_SEED][0]=count;
 	c[D_CBC_RC2][0]=count;
 	c[D_CBC_RC5][0]=count;
 	c[D_CBC_BF][0]=count;
@@ -1290,8 +1398,14 @@ int MAIN(int argc, char **argv)
 	c[D_CBC_128_AES][0]=count;
 	c[D_CBC_192_AES][0]=count;
 	c[D_CBC_256_AES][0]=count;
+	c[D_CBC_128_CML][0]=count;
+	c[D_CBC_192_CML][0]=count;
+	c[D_CBC_256_CML][0]=count;
 	c[D_SHA256][0]=count;
 	c[D_SHA512][0]=count;
+	c[D_IGE_128_AES][0]=count;
+	c[D_IGE_192_AES][0]=count;
+	c[D_IGE_256_AES][0]=count;
 
 	for (i=1; i<SIZE_NUM; i++)
 		{
@@ -1315,6 +1429,7 @@ int MAIN(int argc, char **argv)
 		c[D_CBC_DES][i]=c[D_CBC_DES][i-1]*l0/l1;
 		c[D_EDE3_DES][i]=c[D_EDE3_DES][i-1]*l0/l1;
 		c[D_CBC_IDEA][i]=c[D_CBC_IDEA][i-1]*l0/l1;
+		c[D_CBC_SEED][i]=c[D_CBC_SEED][i-1]*l0/l1;
 		c[D_CBC_RC2][i]=c[D_CBC_RC2][i-1]*l0/l1;
 		c[D_CBC_RC5][i]=c[D_CBC_RC5][i-1]*l0/l1;
 		c[D_CBC_BF][i]=c[D_CBC_BF][i-1]*l0/l1;
@@ -1322,6 +1437,12 @@ int MAIN(int argc, char **argv)
 		c[D_CBC_128_AES][i]=c[D_CBC_128_AES][i-1]*l0/l1;
 		c[D_CBC_192_AES][i]=c[D_CBC_192_AES][i-1]*l0/l1;
 		c[D_CBC_256_AES][i]=c[D_CBC_256_AES][i-1]*l0/l1;
+ 		c[D_CBC_128_CML][i]=c[D_CBC_128_CML][i-1]*l0/l1;
+		c[D_CBC_192_CML][i]=c[D_CBC_192_CML][i-1]*l0/l1;
+		c[D_CBC_256_CML][i]=c[D_CBC_256_CML][i-1]*l0/l1;
+		c[D_IGE_128_AES][i]=c[D_IGE_128_AES][i-1]*l0/l1;
+		c[D_IGE_192_AES][i]=c[D_IGE_192_AES][i-1]*l0/l1;
+		c[D_IGE_256_AES][i]=c[D_IGE_256_AES][i-1]*l0/l1;
 		}
 #ifndef OPENSSL_NO_RSA
 	rsa_c[R_RSA_512][0]=count/2000;
@@ -1715,6 +1836,93 @@ int MAIN(int argc, char **argv)
 			}
 		}
 
+	if (doit[D_IGE_128_AES])
+		{
+		for (j=0; j<SIZE_NUM; j++)
+			{
+			print_message(names[D_IGE_128_AES],c[D_IGE_128_AES][j],lengths[j]);
+			Time_F(START);
+			for (count=0,run=1; COND(c[D_IGE_128_AES][j]); count++)
+				AES_ige_encrypt(buf,buf2,
+					(unsigned long)lengths[j],&aes_ks1,
+					iv,AES_ENCRYPT);
+			d=Time_F(STOP);
+			print_result(D_IGE_128_AES,j,count,d);
+			}
+		}
+	if (doit[D_IGE_192_AES])
+		{
+		for (j=0; j<SIZE_NUM; j++)
+			{
+			print_message(names[D_IGE_192_AES],c[D_IGE_192_AES][j],lengths[j]);
+			Time_F(START);
+			for (count=0,run=1; COND(c[D_IGE_192_AES][j]); count++)
+				AES_ige_encrypt(buf,buf2,
+					(unsigned long)lengths[j],&aes_ks2,
+					iv,AES_ENCRYPT);
+			d=Time_F(STOP);
+			print_result(D_IGE_192_AES,j,count,d);
+			}
+		}
+	if (doit[D_IGE_256_AES])
+		{
+		for (j=0; j<SIZE_NUM; j++)
+			{
+			print_message(names[D_IGE_256_AES],c[D_IGE_256_AES][j],lengths[j]);
+			Time_F(START);
+			for (count=0,run=1; COND(c[D_IGE_256_AES][j]); count++)
+				AES_ige_encrypt(buf,buf2,
+					(unsigned long)lengths[j],&aes_ks3,
+					iv,AES_ENCRYPT);
+			d=Time_F(STOP);
+			print_result(D_IGE_256_AES,j,count,d);
+			}
+		}
+#endif
+#ifndef OPENSSL_NO_CAMELLIA
+	if (doit[D_CBC_128_CML])
+		{
+		for (j=0; j<SIZE_NUM; j++)
+			{
+			print_message(names[D_CBC_128_CML],c[D_CBC_128_CML][j],lengths[j]);
+			Time_F(START);
+			for (count=0,run=1; COND(c[D_CBC_128_CML][j]); count++)
+				Camellia_cbc_encrypt(buf,buf,
+				        (unsigned long)lengths[j],&camellia_ks1,
+				        iv,CAMELLIA_ENCRYPT);
+			d=Time_F(STOP);
+			print_result(D_CBC_128_CML,j,count,d);
+			}
+		}
+	if (doit[D_CBC_192_CML])
+		{
+		for (j=0; j<SIZE_NUM; j++)
+			{
+			print_message(names[D_CBC_192_CML],c[D_CBC_192_CML][j],lengths[j]);
+			Time_F(START);
+			for (count=0,run=1; COND(c[D_CBC_192_CML][j]); count++)
+				Camellia_cbc_encrypt(buf,buf,
+				        (unsigned long)lengths[j],&camellia_ks2,
+				        iv,CAMELLIA_ENCRYPT);
+			d=Time_F(STOP);
+			print_result(D_CBC_192_CML,j,count,d);
+			}
+		}
+	if (doit[D_CBC_256_CML])
+		{
+		for (j=0; j<SIZE_NUM; j++)
+			{
+			print_message(names[D_CBC_256_CML],c[D_CBC_256_CML][j],lengths[j]);
+			Time_F(START);
+			for (count=0,run=1; COND(c[D_CBC_256_CML][j]); count++)
+				Camellia_cbc_encrypt(buf,buf,
+				        (unsigned long)lengths[j],&camellia_ks3,
+				        iv,CAMELLIA_ENCRYPT);
+			d=Time_F(STOP);
+			print_result(D_CBC_256_CML,j,count,d);
+			}
+		}
+
 #endif
 #ifndef OPENSSL_NO_IDEA
 	if (doit[D_CBC_IDEA])
@@ -1732,6 +1940,21 @@ int MAIN(int argc, char **argv)
 			}
 		}
 #endif
+#ifndef OPENSSL_NO_SEED
+	if (doit[D_CBC_SEED])
+		{
+		for (j=0; j<SIZE_NUM; j++)
+			{
+			print_message(names[D_CBC_SEED],c[D_CBC_SEED][j],lengths[j]);
+			Time_F(START);
+			for (count=0,run=1; COND(c[D_CBC_SEED][j]); count++)
+				SEED_cbc_encrypt(buf,buf,
+					(unsigned long)lengths[j],&seed_ks,iv,1);
+			d=Time_F(STOP);
+			print_result(D_CBC_SEED,j,count,d);
+			}
+		}
+#endif
 #ifndef OPENSSL_NO_RC2
 	if (doit[D_CBC_RC2])
 		{
@@ -1909,7 +2132,7 @@ int MAIN(int argc, char **argv)
 				{
 				ret=RSA_verify(NID_md5_sha1, buf,36, buf2,
 					rsa_num, rsa_key[j]);
-				if (ret == 0)
+				if (ret <= 0)
 					{
 					BIO_printf(bio_err,
 						"RSA verify failure\n");
@@ -2040,7 +2263,7 @@ int MAIN(int argc, char **argv)
 		int ret;
 
 		if (!ecdsa_doit[j]) continue; /* Ignore Curve */ 
-		ecdsa[j] = EC_KEY_new();
+		ecdsa[j] = EC_KEY_new_by_curve_name(test_curves[j]);
 		if (ecdsa[j] == NULL) 
 			{
 			BIO_printf(bio_err,"ECDSA failure.\n");
@@ -2049,100 +2272,89 @@ int MAIN(int argc, char **argv)
 			} 
 		else 
 			{
-			ecdsa[j]->group = EC_GROUP_new_by_nid(test_curves[j]);
-			/* Could not obtain group information */
-			if (ecdsa[j]->group == NULL) 
+#if 1
+			EC_KEY_precompute_mult(ecdsa[j], NULL);
+#endif
+			/* Perform ECDSA signature test */
+			EC_KEY_generate_key(ecdsa[j]);
+			ret = ECDSA_sign(0, buf, 20, ecdsasig, 
+				&ecdsasiglen, ecdsa[j]);
+			if (ret == 0) 
 				{
-				BIO_printf(bio_err,"ECDSA failure.Could not obtain group information\n");
+				BIO_printf(bio_err,"ECDSA sign failure.  No ECDSA sign will be done.\n");
 				ERR_print_errors(bio_err);
 				rsa_count=1;
 				} 
 			else 
 				{
-#if 1
-				EC_GROUP_precompute_mult(ecdsa[j]->group, NULL);
-#endif
-				/* Perform ECDSA signature test */
-				EC_KEY_generate_key(ecdsa[j]);
-				ret = ECDSA_sign(0, buf, 20, ecdsasig, 
-					&ecdsasiglen, ecdsa[j]);
-				if (ret == 0) 
-					{
-					BIO_printf(bio_err,"ECDSA sign failure.  No ECDSA sign will be done.\n");
-					ERR_print_errors(bio_err);
-					rsa_count=1;
-					} 
-				else 
-					{
-					pkey_print_message("sign","ecdsa",
-						ecdsa_c[j][0], 
-						test_curves_bits[j],
-						ECDSA_SECONDS);
-
-					Time_F(START);
-					for (count=0,run=1; COND(ecdsa_c[j][0]);
-						count++) 
-						{
-						ret=ECDSA_sign(0, buf, 20, 
-							ecdsasig, &ecdsasiglen,
-							ecdsa[j]);
-						if (ret == 0) 
-							{
-							BIO_printf(bio_err, "ECDSA sign failure\n");
-							ERR_print_errors(bio_err);
-							count=1;
-							break;
-							}
-						}
-					d=Time_F(STOP);
-
-					BIO_printf(bio_err, mr ? "+R5:%ld:%d:%.2f\n" :
-						"%ld %d bit ECDSA signs in %.2fs \n", 
-						count, test_curves_bits[j], d);
-					ecdsa_results[j][0]=d/(double)count;
-					rsa_count=count;
-					}
-
-				/* Perform ECDSA verification test */
-				ret=ECDSA_verify(0, buf, 20, ecdsasig, 
-					ecdsasiglen, ecdsa[j]);
-				if (ret != 1) 
-					{
-					BIO_printf(bio_err,"ECDSA verify failure.  No ECDSA verify will be done.\n");
-					ERR_print_errors(bio_err);
-					ecdsa_doit[j] = 0;
-					} 
-				else 
-					{
-					pkey_print_message("verify","ecdsa",
-					ecdsa_c[j][1],
+				pkey_print_message("sign","ecdsa",
+					ecdsa_c[j][0], 
 					test_curves_bits[j],
 					ECDSA_SECONDS);
-					Time_F(START);
-					for (count=0,run=1; COND(ecdsa_c[j][1]); count++) 
-						{
-						ret=ECDSA_verify(0, buf, 20, ecdsasig, ecdsasiglen, ecdsa[j]);
-						if (ret != 1) 
-							{
-							BIO_printf(bio_err, "ECDSA verify failure\n");
-							ERR_print_errors(bio_err);
-							count=1;
-							break;
-							}
-						}
-					d=Time_F(STOP);
-					BIO_printf(bio_err, mr? "+R6:%ld:%d:%.2f\n"
-							: "%ld %d bit ECDSA verify in %.2fs\n",
-					count, test_curves_bits[j], d);
-					ecdsa_results[j][1]=d/(double)count;
-					}
 
-				if (rsa_count <= 1) 
+				Time_F(START);
+				for (count=0,run=1; COND(ecdsa_c[j][0]);
+					count++) 
 					{
-					/* if longer than 10s, don't do any more */
-					for (j++; j<EC_NUM; j++)
-					ecdsa_doit[j]=0;
+					ret=ECDSA_sign(0, buf, 20, 
+						ecdsasig, &ecdsasiglen,
+						ecdsa[j]);
+					if (ret == 0) 
+						{
+						BIO_printf(bio_err, "ECDSA sign failure\n");
+						ERR_print_errors(bio_err);
+						count=1;
+						break;
+						}
 					}
+				d=Time_F(STOP);
+
+				BIO_printf(bio_err, mr ? "+R5:%ld:%d:%.2f\n" :
+					"%ld %d bit ECDSA signs in %.2fs \n", 
+					count, test_curves_bits[j], d);
+				ecdsa_results[j][0]=d/(double)count;
+				rsa_count=count;
+				}
+
+			/* Perform ECDSA verification test */
+			ret=ECDSA_verify(0, buf, 20, ecdsasig, 
+				ecdsasiglen, ecdsa[j]);
+			if (ret != 1) 
+				{
+				BIO_printf(bio_err,"ECDSA verify failure.  No ECDSA verify will be done.\n");
+				ERR_print_errors(bio_err);
+				ecdsa_doit[j] = 0;
+				} 
+			else 
+				{
+				pkey_print_message("verify","ecdsa",
+				ecdsa_c[j][1],
+				test_curves_bits[j],
+				ECDSA_SECONDS);
+				Time_F(START);
+				for (count=0,run=1; COND(ecdsa_c[j][1]); count++) 
+					{
+					ret=ECDSA_verify(0, buf, 20, ecdsasig, ecdsasiglen, ecdsa[j]);
+					if (ret != 1) 
+						{
+						BIO_printf(bio_err, "ECDSA verify failure\n");
+						ERR_print_errors(bio_err);
+						count=1;
+						break;
+						}
+					}
+				d=Time_F(STOP);
+				BIO_printf(bio_err, mr? "+R6:%ld:%d:%.2f\n"
+						: "%ld %d bit ECDSA verify in %.2fs\n",
+				count, test_curves_bits[j], d);
+				ecdsa_results[j][1]=d/(double)count;
+				}
+
+			if (rsa_count <= 1) 
+				{
+				/* if longer than 10s, don't do any more */
+				for (j++; j<EC_NUM; j++)
+				ecdsa_doit[j]=0;
 				}
 			}
 		}
@@ -2158,8 +2370,8 @@ int MAIN(int argc, char **argv)
 	for (j=0; j<EC_NUM; j++)
 		{
 		if (!ecdh_doit[j]) continue;
-		ecdh_a[j] = EC_KEY_new();
-		ecdh_b[j] = EC_KEY_new();
+		ecdh_a[j] = EC_KEY_new_by_curve_name(test_curves[j]);
+		ecdh_b[j] = EC_KEY_new_by_curve_name(test_curves[j]);
 		if ((ecdh_a[j] == NULL) || (ecdh_b[j] == NULL))
 			{
 			BIO_printf(bio_err,"ECDH failure.\n");
@@ -2168,90 +2380,79 @@ int MAIN(int argc, char **argv)
 			}
 		else
 			{
-			ecdh_a[j]->group = EC_GROUP_new_by_nid(test_curves[j]);
-			if (ecdh_a[j]->group == NULL)
+			/* generate two ECDH key pairs */
+			if (!EC_KEY_generate_key(ecdh_a[j]) ||
+				!EC_KEY_generate_key(ecdh_b[j]))
 				{
-				BIO_printf(bio_err,"ECDH failure.\n");
+				BIO_printf(bio_err,"ECDH key generation failure.\n");
 				ERR_print_errors(bio_err);
-				rsa_count=1;
+				rsa_count=1;		
 				}
 			else
 				{
-				ecdh_b[j]->group = EC_GROUP_dup(ecdh_a[j]->group);
-
-				/* generate two ECDH key pairs */
-				if (!EC_KEY_generate_key(ecdh_a[j]) ||
-					!EC_KEY_generate_key(ecdh_b[j]))
+				/* If field size is not more than 24 octets, then use SHA-1 hash of result;
+				 * otherwise, use result (see section 4.8 of draft-ietf-tls-ecc-03.txt).
+				 */
+				int field_size, outlen;
+				void *(*kdf)(const void *in, size_t inlen, void *out, size_t *xoutlen);
+				field_size = EC_GROUP_get_degree(EC_KEY_get0_group(ecdh_a[j]));
+				if (field_size <= 24 * 8)
 					{
-					BIO_printf(bio_err,"ECDH key generation failure.\n");
-					ERR_print_errors(bio_err);
-					rsa_count=1;		
+					outlen = KDF1_SHA1_len;
+					kdf = KDF1_SHA1;
 					}
 				else
 					{
-					/* If field size is not more than 24 octets, then use SHA-1 hash of result;
-					 * otherwise, use result (see section 4.8 of draft-ietf-tls-ecc-03.txt).
-					 */
-					int field_size, outlen;
-					void *(*kdf)(const void *in, size_t inlen, void *out, size_t *xoutlen);
-					field_size = EC_GROUP_get_degree(ecdh_a[j]->group);
-					if (field_size <= 24 * 8)
-						{
-						outlen = KDF1_SHA1_len;
-						kdf = KDF1_SHA1;
-						}
-					else
-						{
-						outlen = (field_size+7)/8;
-						kdf = NULL;
-						}
-					secret_size_a = ECDH_compute_key(secret_a, outlen,
-						ecdh_b[j]->pub_key,
-						ecdh_a[j], kdf);
-					secret_size_b = ECDH_compute_key(secret_b, outlen,
-						ecdh_a[j]->pub_key,
-						ecdh_b[j], kdf);
-					if (secret_size_a != secret_size_b) 
-						ecdh_checks = 0;
-					else
-						ecdh_checks = 1;
-
-					for (secret_idx = 0; 
-					    (secret_idx < secret_size_a)
-						&& (ecdh_checks == 1);
-					    secret_idx++)
-						{
-						if (secret_a[secret_idx] != secret_b[secret_idx])
-						ecdh_checks = 0;
-						}
-
-					if (ecdh_checks == 0)
-						{
-						BIO_printf(bio_err,"ECDH computations don't match.\n");
-						ERR_print_errors(bio_err);
-						rsa_count=1;		
-						}
-
-					pkey_print_message("","ecdh",
-					ecdh_c[j][0], 
-					test_curves_bits[j],
-					ECDH_SECONDS);
-					Time_F(START);
-					for (count=0,run=1; COND(ecdh_c[j][0]); count++)
-						{
-						ECDH_compute_key(secret_a, outlen,
-						ecdh_b[j]->pub_key,
-						ecdh_a[j], kdf);
-						}
-					d=Time_F(STOP);
-					BIO_printf(bio_err, mr ? "+R7:%ld:%d:%.2f\n" :"%ld %d-bit ECDH ops in %.2fs\n",
-					count, test_curves_bits[j], d);
-					ecdh_results[j][0]=d/(double)count;
-					rsa_count=count;
+					outlen = (field_size+7)/8;
+					kdf = NULL;
 					}
+				secret_size_a = ECDH_compute_key(secret_a, outlen,
+					EC_KEY_get0_public_key(ecdh_b[j]),
+					ecdh_a[j], kdf);
+				secret_size_b = ECDH_compute_key(secret_b, outlen,
+					EC_KEY_get0_public_key(ecdh_a[j]),
+					ecdh_b[j], kdf);
+				if (secret_size_a != secret_size_b) 
+					ecdh_checks = 0;
+				else
+					ecdh_checks = 1;
+
+				for (secret_idx = 0; 
+				    (secret_idx < secret_size_a)
+					&& (ecdh_checks == 1);
+				    secret_idx++)
+					{
+					if (secret_a[secret_idx] != secret_b[secret_idx])
+					ecdh_checks = 0;
+					}
+
+				if (ecdh_checks == 0)
+					{
+					BIO_printf(bio_err,"ECDH computations don't match.\n");
+					ERR_print_errors(bio_err);
+					rsa_count=1;		
+					}
+
+				pkey_print_message("","ecdh",
+				ecdh_c[j][0], 
+				test_curves_bits[j],
+				ECDH_SECONDS);
+				Time_F(START);
+				for (count=0,run=1; COND(ecdh_c[j][0]); count++)
+					{
+					ECDH_compute_key(secret_a, outlen,
+					EC_KEY_get0_public_key(ecdh_b[j]),
+					ecdh_a[j], kdf);
+					}
+				d=Time_F(STOP);
+				BIO_printf(bio_err, mr ? "+R7:%ld:%d:%.2f\n" :"%ld %d-bit ECDH ops in %.2fs\n",
+				count, test_curves_bits[j], d);
+				ecdh_results[j][0]=d/(double)count;
+				rsa_count=count;
 				}
 			}
 
+
 		if (rsa_count <= 1)
 			{
 			/* if longer than 10s, don't do any more */
@@ -2365,7 +2566,7 @@ show_res:
 				k,rsa_bits[k],rsa_results[k][0],
 				rsa_results[k][1]);
 		else
-			fprintf(stdout,"rsa %4u bits %8.4fs %8.4fs %8.1f %8.1f\n",
+			fprintf(stdout,"rsa %4u bits %8.6fs %8.6fs %8.1f %8.1f\n",
 				rsa_bits[k],rsa_results[k][0],rsa_results[k][1],
 				1.0/rsa_results[k][0],1.0/rsa_results[k][1]);
 		}
@@ -2384,7 +2585,7 @@ show_res:
 			fprintf(stdout,"+F3:%u:%u:%f:%f\n",
 				k,dsa_bits[k],dsa_results[k][0],dsa_results[k][1]);
 		else
-			fprintf(stdout,"dsa %4u bits %8.4fs %8.4fs %8.1f %8.1f\n",
+			fprintf(stdout,"dsa %4u bits %8.6fs %8.6fs %8.1f %8.1f\n",
 				dsa_bits[k],dsa_results[k][0],dsa_results[k][1],
 				1.0/dsa_results[k][0],1.0/dsa_results[k][1]);
 		}
@@ -2516,6 +2717,7 @@ static void print_result(int alg,int run_no,int count,double time_used)
 	results[alg][run_no]=((double)count)/time_used*lengths[run_no];
 	}
 
+#ifdef HAVE_FORK
 static char *sstrsep(char **string, const char *delim)
     {
     char isdelim[256];
@@ -2547,7 +2749,6 @@ static char *sstrsep(char **string, const char *delim)
     return token;
     }
 
-#ifdef HAVE_FORK
 static int do_multi(int multi)
 	{
 	int n;
@@ -2559,6 +2760,8 @@ static int do_multi(int multi)
 	for(n=0 ; n < multi ; ++n)
 		{
 		pipe(fd);
+		fflush(stdout);
+		fflush(stderr);
 		if(fork())
 			{
 			close(fd[1]);

apps/spkac.c

@@ -1,6 +1,6 @@
 /* apps/spkac.c */
 
-/* Written by Dr Stephen N Henson (shenson@bigfoot.com) for the OpenSSL
+/* Written by Dr Stephen N Henson (steve@openssl.org) for the OpenSSL
  * project 1999. Based on an original idea by Massimiliano Pala
  * (madwolf@openca.org).
  */
@@ -285,7 +285,7 @@ bad:
 	pkey = NETSCAPE_SPKI_get_pubkey(spki);
 	if(verify) {
 		i = NETSCAPE_SPKI_verify(spki, pkey);
-		if(i) BIO_printf(bio_err, "Signature OK\n");
+		if (i > 0) BIO_printf(bio_err, "Signature OK\n");
 		else {
 			BIO_printf(bio_err, "Signature Failure\n");
 			ERR_print_errors(bio_err);

apps/tsget

@@ -0,0 +1,195 @@
+#!/usr/bin/perl -w
+# Written by Zoltan Glozik <zglozik@stones.com>.
+# Copyright (c) 2002 The OpenTSA Project.  All rights reserved.
+$::version = '$Id: tsget,v 1.1 2006/02/12 23:11:21 ulf Exp $';
+
+use strict;
+use IO::Handle;
+use Getopt::Std;
+use File::Basename;
+use WWW::Curl::easy;
+
+use vars qw(%options);
+
+# Callback for reading the body.
+sub read_body {
+    my ($maxlength, $state) = @_;
+    my $return_data = "";
+    my $data_len = length ${$state->{data}};
+    if ($state->{bytes} < $data_len) {
+	$data_len = $data_len - $state->{bytes};
+	$data_len = $maxlength if $data_len > $maxlength;
+	$return_data = substr ${$state->{data}}, $state->{bytes}, $data_len;
+	$state->{bytes} += $data_len;
+    }
+    return $return_data;
+}
+
+# Callback for writing the body into a variable.
+sub write_body {
+    my ($data, $pointer) = @_;
+    ${$pointer} .= $data;
+    return length($data);
+}
+
+# Initialise a new Curl object.
+sub create_curl {
+    my $url = shift;
+
+    # Create Curl object.
+    my $curl = WWW::Curl::easy::new();
+
+    # Error-handling related options.
+    $curl->setopt(CURLOPT_VERBOSE, 1) if $options{d};
+    $curl->setopt(CURLOPT_FAILONERROR, 1);
+    $curl->setopt(CURLOPT_USERAGENT, "OpenTSA tsget.pl/" . (split / /, $::version)[2]);
+
+    # Options for POST method.
+    $curl->setopt(CURLOPT_UPLOAD, 1);
+    $curl->setopt(CURLOPT_CUSTOMREQUEST, "POST");
+    $curl->setopt(CURLOPT_HTTPHEADER,
+		["Content-Type: application/timestamp-query",
+		"Accept: application/timestamp-reply"]);
+    $curl->setopt(CURLOPT_READFUNCTION, \&read_body);
+    $curl->setopt(CURLOPT_HEADERFUNCTION, sub { return length($_[0]); });
+
+    # Options for getting the result.
+    $curl->setopt(CURLOPT_WRITEFUNCTION, \&write_body);
+
+    # SSL related options.
+    $curl->setopt(CURLOPT_SSLKEYTYPE, "PEM");
+    $curl->setopt(CURLOPT_SSL_VERIFYPEER, 1);	# Verify server's certificate.
+    $curl->setopt(CURLOPT_SSL_VERIFYHOST, 2);	# Check server's CN.
+    $curl->setopt(CURLOPT_SSLKEY, $options{k}) if defined($options{k});
+    $curl->setopt(CURLOPT_SSLKEYPASSWD, $options{p}) if defined($options{p});
+    $curl->setopt(CURLOPT_SSLCERT, $options{c}) if defined($options{c});
+    $curl->setopt(CURLOPT_CAINFO, $options{C}) if defined($options{C});
+    $curl->setopt(CURLOPT_CAPATH, $options{P}) if defined($options{P});
+    $curl->setopt(CURLOPT_RANDOM_FILE, $options{r}) if defined($options{r});
+    $curl->setopt(CURLOPT_EGDSOCKET, $options{g}) if defined($options{g});
+
+    # Setting destination.
+    $curl->setopt(CURLOPT_URL, $url);
+
+    return $curl;
+}
+
+# Send a request and returns the body back.
+sub get_timestamp {
+    my $curl = shift;
+    my $body = shift;
+    my $ts_body;
+    local $::error_buf;
+
+    # Error-handling related options.
+    $curl->setopt(CURLOPT_ERRORBUFFER, "::error_buf");
+
+    # Options for POST method.
+    $curl->setopt(CURLOPT_INFILE, {data => $body, bytes => 0});
+    $curl->setopt(CURLOPT_INFILESIZE, length(${$body}));
+
+    # Options for getting the result.
+    $curl->setopt(CURLOPT_FILE, \$ts_body);
+
+    # Send the request...
+    my $error_code = $curl->perform();
+    my $error_string;
+    if ($error_code != 0) {
+        my $http_code = $curl->getinfo(CURLINFO_HTTP_CODE);
+	$error_string = "could not get timestamp";
+	$error_string .= ", http code: $http_code" unless $http_code == 0;
+	$error_string .= ", curl code: $error_code";
+	$error_string .= " ($::error_buf)" if defined($::error_buf);
+    } else {
+        my $ct = $curl->getinfo(CURLINFO_CONTENT_TYPE);
+	if (lc($ct) ne "application/timestamp-reply") {
+	    $error_string = "unexpected content type returned: $ct";
+        }
+    }
+    return ($ts_body, $error_string);
+
+}
+
+# Print usage information and exists.
+sub usage {
+
+    print STDERR "usage: $0 -h <server_url> [-e <extension>] [-o <output>] ";
+    print STDERR "[-v] [-d] [-k <private_key.pem>] [-p <key_password>] ";
+    print STDERR "[-c <client_cert.pem>] [-C <CA_certs.pem>] [-P <CA_path>] ";
+    print STDERR "[-r <file:file...>] [-g <EGD_socket>] [<request>]...\n";
+    exit 1;
+}
+
+# ----------------------------------------------------------------------
+#   Main program
+# ----------------------------------------------------------------------
+
+# Getting command-line options (default comes from TSGET environment variable).
+my $getopt_arg =  "h:e:o:vdk:p:c:C:P:r:g:";
+if (exists $ENV{TSGET}) {
+    my @old_argv = @ARGV;
+    @ARGV = split /\s+/, $ENV{TSGET};
+    getopts($getopt_arg, \%options) or usage;
+    @ARGV = @old_argv;
+}
+getopts($getopt_arg, \%options) or usage;
+
+# Checking argument consistency.
+if (!exists($options{h}) || (@ARGV == 0 && !exists($options{o}))
+    || (@ARGV > 1 && exists($options{o}))) {
+    print STDERR "Inconsistent command line options.\n";
+    usage;
+}
+# Setting defaults.
+@ARGV = ("-") unless @ARGV != 0;
+$options{e} = ".tsr" unless defined($options{e});
+
+# Processing requests.
+my $curl = create_curl $options{h};
+undef $/;   # For reading whole files.
+REQUEST: foreach (@ARGV) {
+    my $input = $_;
+    my ($base, $path) = fileparse($input, '\.[^.]*');
+    my $output_base = $base . $options{e};
+    my $output = defined($options{o}) ? $options{o} : $path . $output_base;
+
+    STDERR->printflush("$input: ") if $options{v};
+    # Read request.
+    my $body;
+    if ($input eq "-") {
+	# Read the request from STDIN;
+	$body = <STDIN>;
+    } else {
+	# Read the request from file.
+        open INPUT, "<" . $input
+	    or warn("$input: could not open input file: $!\n"), next REQUEST;
+        $body = <INPUT>;
+        close INPUT
+	    or warn("$input: could not close input file: $!\n"), next REQUEST;
+    }
+
+    # Send request.
+    STDERR->printflush("sending request") if $options{v};
+
+    my ($ts_body, $error) = get_timestamp $curl, \$body;
+    if (defined($error)) {
+	die "$input: fatal error: $error\n";
+    }
+    STDERR->printflush(", reply received") if $options{v};
+
+    # Write response.
+    if ($output eq "-") {
+	# Write to STDOUT.
+        print $ts_body;
+    } else {
+	# Write to file.
+        open OUTPUT, ">", $output
+	    or warn("$output: could not open output file: $!\n"), next REQUEST;
+        print OUTPUT $ts_body;
+        close OUTPUT
+	    or warn("$output: could not close output file: $!\n"), next REQUEST;
+    }
+    STDERR->printflush(", $output written.\n") if $options{v};
+}
+$curl->cleanup();
+WWW::Curl::easy::global_cleanup();

apps/verify.c

@@ -266,7 +266,7 @@ static int check(X509_STORE *ctx, char *file, STACK_OF(X509) *uchain, STACK_OF(X
 
 	ret=0;
 end:
-	if (i)
+	if (i > 0)
 		{
 		fprintf(stdout,"OK\n");
 		ret=1;
@@ -367,4 +367,3 @@ static int MS_CALLBACK cb(int ok, X509_STORE_CTX *ctx)
 		ERR_clear_error();
 	return(ok);
 	}
-

apps/version.c

@@ -167,7 +167,7 @@ int MAIN(int argc, char **argv)
 			date=version=cflags=options=platform=dir=1;
 		else
 			{
-			BIO_printf(bio_err,"usage:version -[avbofp]\n");
+			BIO_printf(bio_err,"usage:version -[avbofpd]\n");
 			ret=1;
 			goto end;
 			}

apps/x509.c

@@ -73,8 +73,12 @@
 #include <openssl/x509v3.h>
 #include <openssl/objects.h>
 #include <openssl/pem.h>
+#ifndef OPENSSL_NO_RSA
 #include <openssl/rsa.h>
+#endif
+#ifndef OPENSSL_NO_DSA
 #include <openssl/dsa.h>
+#endif
 
 #undef PROG
 #define PROG x509_main
@@ -110,6 +114,7 @@ static const char *x509_usage[]={
 " -alias          - output certificate alias\n",
 " -noout          - no certificate output\n",
 " -ocspid         - print OCSP hash values for the subject name and public key\n",
+" -ocsp_uri       - print OCSP Responder URL(s)\n",
 " -trustout       - output a \"trusted\" certificate\n",
 " -clrtrust       - clear all trusted purposes\n",
 " -clrreject      - clear all rejected purposes\n",
@@ -175,6 +180,7 @@ int MAIN(int argc, char **argv)
 	int next_serial=0;
 	int subject_hash=0,issuer_hash=0,ocspid=0;
 	int noout=0,sign_flag=0,CA_flag=0,CA_createserial=0,email=0;
+	int ocsp_uri=0;
 	int trustout=0,clrtrust=0,clrreject=0,aliasout=0,clrext=0;
 	int C=0;
 	int x509req=0,days=DEF_DAYS,modulus=0,pubkey=0;
@@ -374,6 +380,8 @@ int MAIN(int argc, char **argv)
 			C= ++num;
 		else if (strcmp(*argv,"-email") == 0)
 			email= ++num;
+		else if (strcmp(*argv,"-ocsp_uri") == 0)
+			ocsp_uri= ++num;
 		else if (strcmp(*argv,"-serial") == 0)
 			serial= ++num;
 		else if (strcmp(*argv,"-next_serial") == 0)
@@ -727,11 +735,14 @@ bad:
 				ASN1_INTEGER_free(ser);
 				BIO_puts(out, "\n");
 				}
-			else if (email == i) 
+			else if ((email == i) || (ocsp_uri == i))
 				{
 				int j;
 				STACK *emlst;
-				emlst = X509_get1_email(x);
+				if (email == i)
+					emlst = X509_get1_email(x);
+				else
+					emlst = X509_get1_ocsp(x);
 				for (j = 0; j < sk_num(emlst); j++)
 					BIO_printf(STDout, "%s\n", sk_value(emlst, j));
 				X509_email_free(emlst);
@@ -1140,7 +1151,7 @@ static int x509_certify(X509_STORE *ctx, char *CAfile, const EVP_MD *digest,
 	/* NOTE: this certificate can/should be self signed, unless it was
 	 * a certificate request in which case it is not. */
 	X509_STORE_CTX_set_cert(&xsc,x);
-	if (!reqfile && !X509_verify_cert(&xsc))
+	if (!reqfile && X509_verify_cert(&xsc) <= 0)
 		goto end;
 
 	if (!X509_check_private_key(xca,pkey))

bugs/VC16.bug

@@ -1,18 +0,0 @@
-Microsoft (R) C/C++ Optimizing Compiler Version 8.00c
-
-Compile with /O2 chokes the compiler on these files
-
-crypto\md\md5_dgst.c		warning '@(#)reg86.c:1.26', line 1110
-crypto\des\ofb64ede.c		warning '@(#)grammar.c:1.147', line 168
-crypto\des\ofb64enc.c		warning '@(#)grammar.c:1.147', line 168
-crypto\des\qud_cksm.c		warning '@(#)grammar.c:1.147', line 168
-crypto\rc2\rc2ofb64.c		warning '@(#)grammar.c:1.147', line 168
-crypto\objects\obj_dat.c	warning	'@(#)grammar.c:1.147', line 168
-				fatal	'@(#)grammar.c:1.147', line 168
-crypto\objects\obj_lib.c	warning	'@(#)grammar.c:1.147', line 168
-				fatal	'@(#)grammar.c:1.147', line 168
-ssl\ssl_auth.c			warning	'@(#)grammar.c:1.147', line 168
-				fatal	'@(#)grammar.c:1.147', line 168
-
-Turning on /G3 with build flags that worked fine for /G2 came up with
-divide by zero errors in 'normal' code in speed.c :-(

certs/README.RootCerts

@@ -0,0 +1,4 @@
+The OpenSSL project does not (any longer) include root CA certificates.
+
+Please check out the FAQ:
+  * How can I set up a bundle of commercial root CA certificates?

certs/RegTP-5R.pem

@@ -1,19 +0,0 @@
-issuer= CN=5R-CA 1:PN+0.2.262.1.10.7.20=#130131,O=Regulierungsbeh\C3\88orde f\C3\88ur Telekommunikation und Post,C=DE
-notBefore=Mar 22 08:55:51 2000 GMT
-notAfter=Mar 22 08:55:51 2005 GMT
-subject= CN=5R-CA 1:PN+0.2.262.1.10.7.20=#130131,O=Regulierungsbeh\C3\88orde f\C3\88ur Telekommunikation und Post,C=DE
------BEGIN CERTIFICATE-----
-MIICaDCCAdSgAwIBAgIDDIOqMAoGBiskAwMBAgUAMG8xCzAJBgNVBAYTAkRFMT0w
-OwYDVQQKFDRSZWd1bGllcnVuZ3NiZWjIb3JkZSBmyHVyIFRlbGVrb21tdW5pa2F0
-aW9uIHVuZCBQb3N0MSEwDAYHAoIGAQoHFBMBMTARBgNVBAMUCjVSLUNBIDE6UE4w
-IhgPMjAwMDAzMjIwODU1NTFaGA8yMDA1MDMyMjA4NTU1MVowbzELMAkGA1UEBhMC
-REUxPTA7BgNVBAoUNFJlZ3VsaWVydW5nc2JlaMhvcmRlIGbIdXIgVGVsZWtvbW11
-bmlrYXRpb24gdW5kIFBvc3QxITAMBgcCggYBCgcUEwExMBEGA1UEAxQKNVItQ0Eg
-MTpQTjCBoTANBgkqhkiG9w0BAQEFAAOBjwAwgYsCgYEAih5BUycfBpqKhU8RDsaS
-vV5AtzWeXQRColL9CH3t0DKnhjKAlJ8iccFtJNv+d3bh8bb9sh0maRSo647xP7hs
-HTjKgTE4zM5BYNfXvST79OtcMgAzrnDiGjQIIWv8xbfV1MqxxdtZJygrwzRMb9jG
-CAGoJEymoyzAMNG7tSdBWnUCBQDAAAABoxIwEDAOBgNVHQ8BAf8EBAMCAQYwCgYG
-KyQDAwECBQADgYEAOaK8ihVSBUcL2IdVBxZYYUKwMz5m7H3zqhN8W9w+iafWudH6
-b+aahkbENEwzg3C3v5g8nze7v7ssacQze657LHjP+e7ksUDIgcS4R1pU2eN16bjS
-P/qGPF3rhrIEHoK5nJULkjkZYTtNiOvmQ/+G70TXDi3Os/TwLlWRvu+7YLM=
------END CERTIFICATE-----

certs/RegTP-6R.pem

@@ -1,19 +0,0 @@
-issuer= CN=6R-Ca 1:PN+0.2.262.1.10.7.20=#130131,O=Regulierungsbeh\C3\88orde f\C3\88ur Telekommunikation und Post,C=DE
-notBefore=Feb  1 09:52:17 2001 GMT
-notAfter=Jun  1 09:52:17 2005 GMT
-subject= CN=6R-Ca 1:PN+0.2.262.1.10.7.20=#130131,O=Regulierungsbeh\C3\88orde f\C3\88ur Telekommunikation und Post,C=DE
------BEGIN CERTIFICATE-----
-MIICaDCCAdSgAwIBAgIDMtGNMAoGBiskAwMBAgUAMG8xCzAJBgNVBAYTAkRFMT0w
-OwYDVQQKFDRSZWd1bGllcnVuZ3NiZWjIb3JkZSBmyHVyIFRlbGVrb21tdW5pa2F0
-aW9uIHVuZCBQb3N0MSEwDAYHAoIGAQoHFBMBMTARBgNVBAMUCjZSLUNhIDE6UE4w
-IhgPMjAwMTAyMDEwOTUyMTdaGA8yMDA1MDYwMTA5NTIxN1owbzELMAkGA1UEBhMC
-REUxPTA7BgNVBAoUNFJlZ3VsaWVydW5nc2JlaMhvcmRlIGbIdXIgVGVsZWtvbW11
-bmlrYXRpb24gdW5kIFBvc3QxITAMBgcCggYBCgcUEwExMBEGA1UEAxQKNlItQ2Eg
-MTpQTjCBoTANBgkqhkiG9w0BAQEFAAOBjwAwgYsCgYEAg6KrFSTNXKqe+2GKGeW2
-wTmbVeflNkp5H/YxA9K1zmEn5XjKm0S0jH4Wfms6ipPlURVaFwTfnB1s++AnJAWf
-mayaE9BP/pdIY6WtZGgW6aZc32VDMCMKPWyBNyagsJVDmzlakIA5cXBVa7Xqqd3P
-ew8i2feMnQXcqHfDv02CW88CBQDAAAABoxIwEDAOBgNVHQ8BAf8EBAMCAQYwCgYG
-KyQDAwECBQADgYEAOkqkUwdaTCt8wcJLA2zLuOwL5ADHMWLhv6gr5zEF+VckA6qe
-IVLVf8e7fYlRmzQd+5OJcGglCQJLGT+ZplI3Mjnrd4plkoTNKV4iOzBcvJD7K4tn
-XPvs9wCFcC7QU7PLvc1FDsAlr7e4wyefZRDL+wbqNfI7QZTSF1ubLd9AzeQ=
------END CERTIFICATE-----

certs/demo/nortelCA.pem

@@ -1,16 +0,0 @@
------BEGIN CERTIFICATE-----
-MIICajCCAdMCBDGA0QUwDQYJKoZIhvcNAQEEBQAwfTELMAkGA1UEBhMCQ2ExDzAN
-BgNVBAcTBk5lcGVhbjEeMBwGA1UECxMVTm8gTGlhYmlsaXR5IEFjY2VwdGVkMR8w
-HQYDVQQKExZGb3IgRGVtbyBQdXJwb3NlcyBPbmx5MRwwGgYDVQQDExNFbnRydXN0
-IERlbW8gV2ViIENBMB4XDTk2MDQyNjEzMzUwMVoXDTA2MDQyNjEzMzUwMVowfTEL
-MAkGA1UEBhMCQ2ExDzANBgNVBAcTBk5lcGVhbjEeMBwGA1UECxMVTm8gTGlhYmls
-aXR5IEFjY2VwdGVkMR8wHQYDVQQKExZGb3IgRGVtbyBQdXJwb3NlcyBPbmx5MRww
-GgYDVQQDExNFbnRydXN0IERlbW8gV2ViIENBMIGdMA0GCSqGSIb3DQEBAQUAA4GL
-ADCBhwKBgQCaroS7O1DA0hm4IefNYU1cx/nqOmzEnk291d1XqznDeF4wEgakbkCc
-zTKxK791yNpXG5RmngqH7cygDRTHZJ6mfCRn0wGC+AI00F2vYTGqPGRQL1N3lZT0
-YDKFC0SQeMMjFIZ1aeQigroFQnHo0VB3zWIMpNkka8PY9lxHZAmWwQIBAzANBgkq
-hkiG9w0BAQQFAAOBgQBAx0UMVA1s54lMQyXjMX5kj99FJN5itb8bK1Rk+cegPQPF
-cWO9SEWyEjjBjIkjjzAwBkaEszFsNGxemxtXvwjIm1xEUMTVlPEWTs2qnDvAUA9W
-YqhWbhH0toGT36236QAsqCZ76rbTRVSSX2BHyJwJMG2tCRv7kRJ//NIgxj3H4w==
------END CERTIFICATE-----
-

certs/demo/timCA.pem

@@ -1,16 +0,0 @@
-Tims test GCI CA
-
------BEGIN CERTIFICATE-----
-MIIB8DCCAZoCAQAwDQYJKoZIhvcNAQEEBQAwgYIxCzAJBgNVBAYTAkFVMRMwEQYD
-VQQIEwpRdWVlbnNsYW5kMREwDwYDVQQHEwhCcmlzYmFuZTEaMBgGA1UEChMRQ3J5
-cHRTb2Z0IFB0eSBMdGQxFDASBgNVBAsTC2RldmVsb3BtZW50MRkwFwYDVQQDExBD
-cnlwdFNvZnQgRGV2IENBMB4XDTk3MDMyMjEzMzQwNFoXDTk4MDMyMjEzMzQwNFow
-gYIxCzAJBgNVBAYTAkFVMRMwEQYDVQQIEwpRdWVlbnNsYW5kMREwDwYDVQQHEwhC
-cmlzYmFuZTEaMBgGA1UEChMRQ3J5cHRTb2Z0IFB0eSBMdGQxFDASBgNVBAsTC2Rl
-dmVsb3BtZW50MRkwFwYDVQQDExBDcnlwdFNvZnQgRGV2IENBMFwwDQYJKoZIhvcN
-AQEBBQADSwAwSAJBAOAOAqogG5QwAmLhzyO4CoRnx/wVy4NZP4dxJy83O1EnL0rw
-OdsamJKvPOLHgSXo3gDu9uVyvCf/QJmZAmC5ml8CAwEAATANBgkqhkiG9w0BAQQF
-AANBADRRS/GVdd7rAqRW6SdmgLJduOU2yq3avBu99kRqbp9A/dLu6r6jU+eP4oOA
-TfdbFZtAAD2Hx9jUtY3tfdrJOb8= 
------END CERTIFICATE-----
-

certs/demo/tjhCA.pem

@@ -1,15 +0,0 @@
------BEGIN CERTIFICATE-----
-MIICVjCCAgACAQAwDQYJKoZIhvcNAQEEBQAwgbUxCzAJBgNVBAYTAkFVMRMwEQYD
-VQQIEwpRdWVlbnNsYW5kMREwDwYDVQQHEwhCcmlzYmFuZTEaMBgGA1UEChMRQ3J5
-cHRTb2Z0IFB0eSBMdGQxLDAqBgNVBAsTI1dPUlRITEVTUyBDRVJUSUZJQ0FUSU9O
-IEFVVEhPUklUSUVTMTQwMgYDVQQDEytaRVJPIFZBTFVFIENBIC0gREVNT05TVFJB
-VElPTiBQVVJQT1NFUyBPTkxZMB4XDTk3MDQwMzEzMjI1NFoXDTk4MDQwMzEzMjI1
-NFowgbUxCzAJBgNVBAYTAkFVMRMwEQYDVQQIEwpRdWVlbnNsYW5kMREwDwYDVQQH
-EwhCcmlzYmFuZTEaMBgGA1UEChMRQ3J5cHRTb2Z0IFB0eSBMdGQxLDAqBgNVBAsT
-I1dPUlRITEVTUyBDRVJUSUZJQ0FUSU9OIEFVVEhPUklUSUVTMTQwMgYDVQQDEyta
-RVJPIFZBTFVFIENBIC0gREVNT05TVFJBVElPTiBQVVJQT1NFUyBPTkxZMFwwDQYJ
-KoZIhvcNAQEBBQADSwAwSAJBAOZ7T7yqP/tyspcko3yPY1y0Cm2EmwNvzW4QgVXR
-Fjs3HmJ4xtSpXdo6mwcGezL3Abt/aQXaxv9PU8xt+Jr0OFUCAwEAATANBgkqhkiG
-9w0BAQQFAANBAOQpYmGgyCqCy1OljgJhCqQOu627oVlHzK1L+t9vBaMfn40AVUR4
-WzQVWO31KTgi5vTK1U+3h46fgUWqQ0h+6rU=
------END CERTIFICATE-----

certs/demo/vsigntca.pem

@@ -1,18 +0,0 @@
-subject=/O=VeriSign, Inc/OU=www.verisign.com/repository/TestCPS Incorp. By Ref. Liab. LTD./OU=For VeriSign authorized testing only. No assurances (C)VS1997
-notBefore=Mar  4 00:00:00 1997 GMT
-notAfter=Mar  4 23:59:59 2025 GMT
------BEGIN CERTIFICATE-----
-MIICTTCCAfcCEEdoCqpuXxnoK27q7d58Qc4wDQYJKoZIhvcNAQEEBQAwgakxFjAU
-BgNVBAoTDVZlcmlTaWduLCBJbmMxRzBFBgNVBAsTPnd3dy52ZXJpc2lnbi5jb20v
-cmVwb3NpdG9yeS9UZXN0Q1BTIEluY29ycC4gQnkgUmVmLiBMaWFiLiBMVEQuMUYw
-RAYDVQQLEz1Gb3IgVmVyaVNpZ24gYXV0aG9yaXplZCB0ZXN0aW5nIG9ubHkuIE5v
-IGFzc3VyYW5jZXMgKEMpVlMxOTk3MB4XDTk3MDMwNDAwMDAwMFoXDTI1MDMwNDIz
-NTk1OVowgakxFjAUBgNVBAoTDVZlcmlTaWduLCBJbmMxRzBFBgNVBAsTPnd3dy52
-ZXJpc2lnbi5jb20vcmVwb3NpdG9yeS9UZXN0Q1BTIEluY29ycC4gQnkgUmVmLiBM
-aWFiLiBMVEQuMUYwRAYDVQQLEz1Gb3IgVmVyaVNpZ24gYXV0aG9yaXplZCB0ZXN0
-aW5nIG9ubHkuIE5vIGFzc3VyYW5jZXMgKEMpVlMxOTk3MFwwDQYJKoZIhvcNAQEB
-BQADSwAwSAJBAMak6xImJx44jMKcbkACy5/CyMA2fqXK4PlzTtCxRq5tFkDzne7s
-cI8oFK/J+gFZNE3bjidDxf07O3JOYG9RGx8CAwEAATANBgkqhkiG9w0BAQQFAANB
-ADT523tENOKrEheZFpsJx1UUjPrG7TwYc/C4NBHrZI4gZJcKVFIfNulftVS6UMYW
-ToLEMaUojc3DuNXHG21PDG8=
------END CERTIFICATE-----

certs/eng1.pem

@@ -1,23 +0,0 @@
------BEGIN CERTIFICATE-----
-MIID3TCCAsWgAwIBAgIBADANBgkqhkiG9w0BAQUFADCBqDELMAkGA1UEBhMCQ0Ex
-CzAJBgNVBAgTAk9OMRAwDgYDVQQHEwdUb3JvbnRvMRgwFgYDVQQKEw9CYW5rRW5n
-aW5lIEluYy4xKTAnBgNVBAsTIENlcnRpZmljYXRpb24gQXV0aG9yaXR5IERpdmlz
-aW9uMRMwEQYDVQQDEwpiYW5rZW5naW5lMSAwHgYJKoZIhvcNAQkBFhFjYUBiYW5r
-ZW5naW5lLmNvbTAeFw05ODAxMDEwMDAwMDBaFw0zODAxMTcwMDAwMDBaMIGoMQsw
-CQYDVQQGEwJDQTELMAkGA1UECBMCT04xEDAOBgNVBAcTB1Rvcm9udG8xGDAWBgNV
-BAoTD0JhbmtFbmdpbmUgSW5jLjEpMCcGA1UECxMgQ2VydGlmaWNhdGlvbiBBdXRo
-b3JpdHkgRGl2aXNpb24xEzARBgNVBAMTCmJhbmtlbmdpbmUxIDAeBgkqhkiG9w0B
-CQEWEWNhQGJhbmtlbmdpbmUuY29tMIIBIjANBgkqhkiG9w0BAQEFAAOCAQ8AMIIB
-CgKCAQEA14LoTUAl1/hEy+Kh1kLHiBdW2zD3V4IhM7xxTVKsYsIH56nr69ATTIxU
-P36eRzeZ137qt1AxHFjDCidk3m1Ul6l59ProPexdslLLM2npM3f2cteg+toyiYiS
-EJKjyzIu1xF1j9qzGkymSY/4DsXLZNk9FaczxMk/Ooc6Os1M3AverL4VG4rYIb6f
-eR32cIKJ9Q1fGuyKk7ipq1XQfPW8a8TgZdbHbe7U9Gk3iasGMHHvpR9Ep3mGbgdT
-uQ98SBEuIwe1BUCGg/MXpVy48MNXfAMotBgGw4pl9yqSjMni2FB+E9Q9DHFs2RgX
-MqzKuo8zcPxKx2kZ6Arj8+27dw2clQIDAQABoxAwDjAMBgNVHRMEBTADAQH/MA0G
-CSqGSIb3DQEBBQUAA4IBAQBauupHX9EhpC/r57d6b5kkeWvognxIP9//TO4iw3qb
-zIXEkPXmJmwVzlzoKJWqiya+aw19SP0+G6CzsFOBo/9ehmz+hZ8bhYX4MjlWzX5u
-Tnkhz172j9fOBUmrTVPkcRIs6zjCD5PQAGoBPP1/Zdy2N36lZ0U7lg07Opirj/yJ
-PSJeM2j0fwIFAroiVckvdT0BVwB6S/cPaAQGPghbbr1YGSmYrMriSv825ILJUfxz
-rJYunGR9FiY9Ob7+jwJwiZMS4CxSPktutxr/3hOvr1+ALS7IcVakhhA3PuZAJbdH
-FRclR9qMM8aBnBZmf+Uv3K3uhT+UBzzY654U9Yi1JYnA
------END CERTIFICATE-----

certs/eng2.pem

@@ -1,23 +0,0 @@
------BEGIN CERTIFICATE-----
-MIID3TCCAsWgAwIBAgIBADANBgkqhkiG9w0BAQUFADCBqDELMAkGA1UEBhMCQ0Ex
-CzAJBgNVBAgTAk9OMRAwDgYDVQQHEwdUb3JvbnRvMRgwFgYDVQQKEw9DZXJ0RW5n
-aW5lIEluYy4xKTAnBgNVBAsTIENlcnRpZmljYXRpb24gQXV0aG9yaXR5IERpdmlz
-aW9uMRMwEQYDVQQDEwpjZXJ0ZW5naW5lMSAwHgYJKoZIhvcNAQkBFhFjYUBjZXJ0
-ZW5naW5lLmNvbTAeFw05ODAxMDEwMDAwMDBaFw0zODAxMTcwMDAwMDBaMIGoMQsw
-CQYDVQQGEwJDQTELMAkGA1UECBMCT04xEDAOBgNVBAcTB1Rvcm9udG8xGDAWBgNV
-BAoTD0NlcnRFbmdpbmUgSW5jLjEpMCcGA1UECxMgQ2VydGlmaWNhdGlvbiBBdXRo
-b3JpdHkgRGl2aXNpb24xEzARBgNVBAMTCmNlcnRlbmdpbmUxIDAeBgkqhkiG9w0B
-CQEWEWNhQGNlcnRlbmdpbmUuY29tMIIBIjANBgkqhkiG9w0BAQEFAAOCAQ8AMIIB
-CgKCAQEA7aTXURShaeVt9u/dP3Q2dVib3jTCZvEyc6yfpGgaYWewXWuP4HOSfI4h
-GZblbpl+dzJc6RjhR+pguIRtbT5FJB8SJGjRqoujBEOQOxtVtc2fjM9Dqh0iOvMW
-WS6buxHG55GVrHAQaO5HXEScKQBa9ZyNmpSXPTEBrDMej1OAGOkc524/TZrgFPF4
-AiJLLkxCcP8NuzUKlW3WzNMSSoCtjkUKy4wjSLlAWCFM0T9Df6/+Z8ZUQTzHoKCD
-ncH5Qnynd7DlOwKQ2JwwxRhYGiGVTUN0GUq7qA11kW3+vnbFesKQXoF6o2PVx9s2
-YXviI2NXXUjZ0pVnsnFCc45Pm8XojwIDAQABoxAwDjAMBgNVHRMEBTADAQH/MA0G
-CSqGSIb3DQEBBQUAA4IBAQBP/aHOKJ00Akzc9HWM1X30hlWZFBaQi4pqD4Uhk8+p
-KzzwFP5DRLBOz8TYBbtdXrS6hxVMr2sqWmhVkuyepWhHZazKGyHY/y0FbOXsewAV
-1QxxSyx7ve89pCKv4/w0rQcP916iHc8Y/TCpmz7eITa3GId+8H/XTaBi8GBp9X9O
-w8m25FmEB1NT+eJwefvfdKowjy4tSorKdW/eJspxNuTSRGmUy8G71W5dYvgpAlx6
-mdnHyzxEGvRYNNI2bS0ifXgbEFNWqSas9q34ea5KOpkJu8T/KyXfSb6rPOsBSb0t
-wMowwGtCVH2C4Lw/8zo0EjhMpTOsPaub408PrZ+NQ2bl
------END CERTIFICATE-----

certs/eng3.pem

@@ -1,34 +0,0 @@
------BEGIN CERTIFICATE-----
-MIIF3TCCA8WgAwIBAgIBADANBgkqhkiG9w0BAQUFADCBqDELMAkGA1UEBhMCQ0Ex
-CzAJBgNVBAgTAk9OMRAwDgYDVQQHEwdUb3JvbnRvMRgwFgYDVQQKEw9Gb3J0RW5n
-aW5lIEluYy4xKTAnBgNVBAsTIENlcnRpZmljYXRpb24gQXV0aG9yaXR5IERpdmlz
-aW9uMRMwEQYDVQQDEwpmb3J0ZW5naW5lMSAwHgYJKoZIhvcNAQkBFhFjYUBmb3J0
-ZW5naW5lLmNvbTAeFw05ODAxMDEwMDAwMDBaFw0zODAxMTcwMDAwMDBaMIGoMQsw
-CQYDVQQGEwJDQTELMAkGA1UECBMCT04xEDAOBgNVBAcTB1Rvcm9udG8xGDAWBgNV
-BAoTD0ZvcnRFbmdpbmUgSW5jLjEpMCcGA1UECxMgQ2VydGlmaWNhdGlvbiBBdXRo
-b3JpdHkgRGl2aXNpb24xEzARBgNVBAMTCmZvcnRlbmdpbmUxIDAeBgkqhkiG9w0B
-CQEWEWNhQGZvcnRlbmdpbmUuY29tMIICIjANBgkqhkiG9w0BAQEFAAOCAg8AMIIC
-CgKCAgEAyr7GbpwDxx1v3EYbo0gcO+ligEhlDqG2e7u/AbWGoVAqc8+q6auUJUtz
-4i7oh0yNadu1o9kpXW+znkgO0zlrgjGskqqMO1ooppzTJdFy/P8gR6x1Iuv3kWtX
-OuzwPPEjv09LWlhyJsN+oU4ztTVf07I0Q9zYupcoDQ58XKRheI9KdDB2DYSmxywA
-WSLQwIeG0Qa7gvokeQlpkgkEC7viEecJ3752KXBJHnh7As51mxnlpmG6sDy67Eli
-HDw5tHETRqbtnscGBjskGQBqR5xt7+QnnthZrN8HJHDoa9zgGephwizhkL44lXLF
-YK9W5XhFbblw2c+mAcHkokRiwD7CPeIoyD2a/Jcw3n5hegKTlNhd4BFGVF6JR7gF
-OFk2QfHXit5uthsij9Xhl7WAgQUqLgggD9MphqPf4nY66OZUJV9ZsmB+Qfp8UizB
-0WAOegactKVyRqHtRa+KIEXQXNtZgjcmMk9CYkP0nIbKtgKXaH6+9VMHNOryCnFE
-7pSsuPUkypncFWCHGSeiFO3w4w4J4csltxBADQzxfRu5KZnlToQN7bVpI/Q31tVX
-E5bjrJcq6Oj/OTqZ3ID+OqbkUdAg0ggjRKcTgxnLHd/AbMzJ6PsclDDf7cLs0WSl
-xMxQR/z5bNST1rNtT9rsiv2TOhfvCBxO9AOjBioO8PLO032HTNECAwEAAaMQMA4w
-DAYDVR0TBAUwAwEB/zANBgkqhkiG9w0BAQUFAAOCAgEAVyBpPWfT2VOyvVpslGKx
-8h0+CWP8cilygGRtZJ5dAJzc//1REAHdvK+TgZ4Foz3dqHhXI+RNN0FpzuWaYMjW
-ZTS0kAmcOQuGY1Oo4PGlPHI21pNz29oFDTJr0ZmLBJ4JKVsE2soJg55jdk9MZHA7
-K//7HH9RsmrWZOE5DZDlrxp6+naixhMwnlPKKisIy9GNZUPqGdUWABMdB/BUVVNl
-NU5TtWpIXUClMd8a+eoKcItBeYXowkHOBpinPkDX3clFDIUfWiw0Ro08s8SrrFqR
-8Szwbrj52Xv1RM56oGqCjnkvJctxihODV7NcpxoAFjIZokDom0q6zPrrTUsLFQov
-Plovc3w5hmALiDMshaTvE1nm3Psn4yQ+FlRE8epTZrQiIGypZkZC6lcz0mYawueW
-cThYWGFhVG4ktQzOjjNRsNxopW+W7cF1zQTxiWUDnxIKSj7gtdQ2jiubxEEhfVag
-r8DMtAccNVTZVURpGi56TptOOuotrTqqC+2GviW4hlxvdvmuQN0OlXlUwzz2Trxc
-FamNnuA54lZw/8arLtxsFmHrcnPw53+1spumLD0S5UkxHNu40h6LIVpZz3H+0rLz
-uFofTfiyMjcfK2AyHQTgUCbsrvgNuLDQUbyFGVchdFUkhztX3DhEVnxnnrpY4BVj
-QdTqWIvw7lGlSuDCjxEQAOc=
------END CERTIFICATE-----

certs/eng4.pem

@@ -1,23 +0,0 @@
------BEGIN CERTIFICATE-----
-MIID3TCCAsWgAwIBAgIBADANBgkqhkiG9w0BAQUFADCBqDELMAkGA1UEBhMCQ0Ex
-CzAJBgNVBAgTAk9OMRAwDgYDVQQHEwdUb3JvbnRvMRgwFgYDVQQKEw9NYWlsRW5n
-aW5lIEluYy4xKTAnBgNVBAsTIENlcnRpZmljYXRpb24gQXV0aG9yaXR5IERpdmlz
-aW9uMRMwEQYDVQQDEwptYWlsZW5naW5lMSAwHgYJKoZIhvcNAQkBFhFjYUBtYWls
-ZW5naW5lLmNvbTAeFw05ODAxMDEwMDAwMDBaFw0zODAxMTcwMDAwMDBaMIGoMQsw
-CQYDVQQGEwJDQTELMAkGA1UECBMCT04xEDAOBgNVBAcTB1Rvcm9udG8xGDAWBgNV
-BAoTD01haWxFbmdpbmUgSW5jLjEpMCcGA1UECxMgQ2VydGlmaWNhdGlvbiBBdXRo
-b3JpdHkgRGl2aXNpb24xEzARBgNVBAMTCm1haWxlbmdpbmUxIDAeBgkqhkiG9w0B
-CQEWEWNhQG1haWxlbmdpbmUuY29tMIIBIjANBgkqhkiG9w0BAQEFAAOCAQ8AMIIB
-CgKCAQEAqXmfsU+lx+NFmn6tN17RTOyaddHqLnr/3rzEDIyT9TN+tF9TG7jmK7lJ
-Jrj5arQ3nTFaLF8JuND2U1z/cLPw6/TX+1tE3v3CNUDSjaisyUDiUyp3TE8hMMMz
-zfZQn0JsGgNhhWxqyzjhRQGtKL4+xtn8VsF/8zGgZYke7nlmVKz/FslDFTnNoodL
-BAEGiu9JQS9qqpbSs20NdZ6LXPL2A4iTjnsNFBW3jIMVIn/JVVyaycU7ue2oFviD
-vLNpkVZcR7A+jjIdIumOc5VSF0y7y74cQC5YwkR2mLK7UBYDK6NCY3ta/C4M8NsM
-0FpmvRl0+A1ivZtVwqI98dxDtp7HeQIDAQABoxAwDjAMBgNVHRMEBTADAQH/MA0G
-CSqGSIb3DQEBBQUAA4IBAQAjfNn5BCzxylBDakFQGWKE/P43PRibMOEzfd7+DzbY
-WIekoz3i00DwoH3b6j4gwlDJRAOq4dF6/Pt/uBOHDo/op+ef+9ErmKPd+ehXN9h3
-7QbccTgz7DtVwA4iRlDRLru+JuXzT+OsCHuFZMOLJ+KD2JAGh3W68JjdcLkrlcpt
-AU0wc5aOHPPfEBdIah8y8QtNzXRVzoBt8zzvgCARkXxTS2u/9QaXR1hML0JtDgQS
-SdZ6Kd8SN6yzqxD+buYD5sOfJmjBF/n3lqFHNMHnnGXy2TAXZtIAWzffU3A0cGPB
-N6FZ026a86HbF1X4k+xszhbJu/ikczyuWnCJIg3fTYSD
------END CERTIFICATE-----

certs/eng5.pem

@@ -1,23 +0,0 @@
------BEGIN CERTIFICATE-----
-MIID6TCCAtGgAwIBAgIBADANBgkqhkiG9w0BAQUFADCBrjELMAkGA1UEBhMCQ0Ex
-CzAJBgNVBAgTAk9OMRAwDgYDVQQHEwdUb3JvbnRvMRowGAYDVQQKExFUcmFkZXJF
-bmdpbmUgSW5jLjEpMCcGA1UECxMgQ2VydGlmaWNhdGlvbiBBdXRob3JpdHkgRGl2
-aXNpb24xFTATBgNVBAMTDHRyYWRlcmVuZ2luZTEiMCAGCSqGSIb3DQEJARYTY2FA
-dHJhZGVyZW5naW5lLmNvbTAeFw05ODAxMDEwMDAwMDBaFw0zODAxMTcwMDAwMDBa
-MIGuMQswCQYDVQQGEwJDQTELMAkGA1UECBMCT04xEDAOBgNVBAcTB1Rvcm9udG8x
-GjAYBgNVBAoTEVRyYWRlckVuZ2luZSBJbmMuMSkwJwYDVQQLEyBDZXJ0aWZpY2F0
-aW9uIEF1dGhvcml0eSBEaXZpc2lvbjEVMBMGA1UEAxMMdHJhZGVyZW5naW5lMSIw
-IAYJKoZIhvcNAQkBFhNjYUB0cmFkZXJlbmdpbmUuY29tMIIBIjANBgkqhkiG9w0B
-AQEFAAOCAQ8AMIIBCgKCAQEAzyX5QE+5SN+zgNn1v3zp9HmP4hQOWW8WuEVItZVP
-9bt/xj5NeJd1kyPL/SqnF2qHcL3o/74r0Ga55aKHniwKYgQTlp5ELGfQ568QQeN9
-xNIHtUXeStI9zCNZyZC+4YqObdMR/ivKA/WsLfUVMl2lV5JzJJz1BOE0gKEYiEyz
-gIq5oLzkP/mOXoHRvWSZD2D0eHYIO7ovV2epVFK7g7p+dC4QoeIUEli+GF/Myg88
-dV/qmi+Sybck2RLPXa8Nh27/ETVQ7kE1Eafmx7EyCqIhG+5lwJAy3HwHUBwAYuzj
-iuZz5lD8aQmr8SKuvy3eOH9SVN5wh3YBlrNGwTStkESVLwIDAQABoxAwDjAMBgNV
-HRMEBTADAQH/MA0GCSqGSIb3DQEBBQUAA4IBAQAWOPAUhZd3x9EQiFJcuxFTMd9q
-axgcriCzJsM6D96sYGko9xTeLhX/lr1bliVYI5AlupoLXAdMzGHJkOgaTirKjQXr
-F9nymDdUWKe3TmwGob5016nQlH7qRKvGO3hka0rOGRK2U/2JT/4Qp8iH/DFi6cyM
-uP0q8n64SAkxZXLzUuFQXqf7U/SNjzb9XJQEIAdjp7eYd3Qb4jDsDcX0FrKMF1aV
-r0dCDnS7am7WTXPYCDGdSkPgEHEtLYIYH3lZp5sKdVZ9wl4F0WNFkRWRUr7AXPjw
-50uLmUNmKCd8JZLMGA1TRNSTi7U9EcrWt0OkMWm74T2WVnAgNsDv2WrWsGfj
------END CERTIFICATE-----

certs/expired/ICE-CA.pem

@@ -1,59 +0,0 @@
-Certificate:
-    Data:
-        Version: 3 (0x2)
-        Serial Number: 1 (0x1)
-        Signature Algorithm: md5WithRSAEncryption
-        Issuer: O=European ICE-TEL project, OU=V3-Certification Authority
-        Validity
-            Not Before: Apr  2 17:35:53 1997 GMT
-            Not After : Apr  2 17:35:53 1998 GMT
-        Subject: O=European ICE-TEL project, OU=V3-Certification Authority, L=Darmstadt
-        Subject Public Key Info:
-            Public Key Algorithm: rsa
-            RSA Public Key: (512 bit)
-                Modulus (512 bit):
-                    00:82:75:ba:f6:d1:60:b5:f9:15:b3:6a:dd:29:8f:
-                    8b:a4:6f:1a:88:e0:50:43:40:0b:79:41:d5:d3:16:
-                    44:7d:74:65:17:42:06:52:0b:e9:50:c8:10:cd:24:
-                    e2:ae:8d:22:30:73:e6:b4:b7:93:1f:e5:6e:a2:ae:
-                    49:11:a5:c9:45
-                Exponent: 65537 (0x10001)
-        X509v3 extensions:
-            X509v3 Authority Key Identifier: 
-                0.........z.."p......e..
-            X509v3 Subject Key Identifier: 
-                ..~r..:..B.44fu......3
-            X509v3 Key Usage: critical
-                ....
-            X509v3 Certificate Policies: critical
-                0.0...*...
-            X509v3 Subject Alternative Name: 
-                0!..secude-support@darmstadt.gmd.de
-            X509v3 Issuer Alternative Name: 
-                0I..ice-tel-ca@darmstadt.gmd.de.*http://www.darmstadt.gmd.de/ice-tel/euroca
-            X509v3 Basic Constraints: critical
-                0....
-            X509v3 CRL Distribution Points: 
-                0200...,.*http://www.darmstadt.gmd.de/ice-tel/euroca
-    Signature Algorithm: md5WithRSAEncryption
-        17:a2:88:b7:99:5a:05:41:e4:13:34:67:e6:1f:3e:26:ec:4b:
-        69:f9:3e:28:22:be:9d:1c:ab:41:6f:0c:00:85:fe:45:74:f6:
-        98:f0:ce:9b:65:53:4a:50:42:c7:d4:92:bd:d7:a2:a8:3d:98:
-        88:73:cd:60:28:79:a3:fc:48:7a
------BEGIN CERTIFICATE-----
-MIICzDCCAnagAwIBAgIBATANBgkqhkiG9w0BAQQFADBIMSEwHwYDVQQKExhFdXJv
-cGVhbiBJQ0UtVEVMIHByb2plY3QxIzAhBgNVBAsTGlYzLUNlcnRpZmljYXRpb24g
-QXV0aG9yaXR5MB4XDTk3MDQwMjE3MzU1M1oXDTk4MDQwMjE3MzU1M1owXDEhMB8G
-A1UEChMYRXVyb3BlYW4gSUNFLVRFTCBwcm9qZWN0MSMwIQYDVQQLExpWMy1DZXJ0
-aWZpY2F0aW9uIEF1dGhvcml0eTESMBAGA1UEBxMJRGFybXN0YWR0MFkwCgYEVQgB
-AQICAgADSwAwSAJBAIJ1uvbRYLX5FbNq3SmPi6RvGojgUENAC3lB1dMWRH10ZRdC
-BlIL6VDIEM0k4q6NIjBz5rS3kx/lbqKuSRGlyUUCAwEAAaOCATgwggE0MB8GA1Ud
-IwQYMBaAFIr3yNUOx3ro1yJw4AuJ1bbsZbzPMB0GA1UdDgQWBBR+cvL4OoacQog0
-NGZ1w9T80aIRMzAOBgNVHQ8BAf8EBAMCAfYwFAYDVR0gAQH/BAowCDAGBgQqAwQF
-MCoGA1UdEQQjMCGBH3NlY3VkZS1zdXBwb3J0QGRhcm1zdGFkdC5nbWQuZGUwUgYD
-VR0SBEswSYEbaWNlLXRlbC1jYUBkYXJtc3RhZHQuZ21kLmRlhipodHRwOi8vd3d3
-LmRhcm1zdGFkdC5nbWQuZGUvaWNlLXRlbC9ldXJvY2EwDwYDVR0TAQH/BAUwAwEB
-/zA7BgNVHR8ENDAyMDCgLqAshipodHRwOi8vd3d3LmRhcm1zdGFkdC5nbWQuZGUv
-aWNlLXRlbC9ldXJvY2EwDQYJKoZIhvcNAQEEBQADQQAXooi3mVoFQeQTNGfmHz4m
-7Etp+T4oIr6dHKtBbwwAhf5FdPaY8M6bZVNKUELH1JK916KoPZiIc81gKHmj/Eh6
------END CERTIFICATE-----

certs/expired/ICE-root.pem

@@ -1,48 +0,0 @@
-Certificate:
-    Data:
-        Version: 3 (0x2)
-        Serial Number: 0 (0x0)
-        Signature Algorithm: md5WithRSAEncryption
-        Issuer: O=European ICE-TEL project, OU=V3-Certification Authority
-        Validity
-            Not Before: Apr  2 17:33:36 1997 GMT
-            Not After : Apr  2 17:33:36 1998 GMT
-        Subject: O=European ICE-TEL project, OU=V3-Certification Authority
-        Subject Public Key Info:
-            Public Key Algorithm: rsa
-            RSA Public Key: (512 bit)
-                Modulus (512 bit):
-                    00:80:3e:eb:ae:47:a9:fe:10:54:0b:81:8b:9c:2b:
-                    82:ab:3a:61:36:65:8b:f3:73:9f:ac:ac:7a:15:a7:
-                    13:8f:b4:c4:ba:a3:0f:bc:a5:58:8d:cc:b1:93:31:
-                    9e:81:9e:8c:19:61:86:fa:52:73:54:d1:97:76:22:
-                    e7:c7:9f:41:cd
-                Exponent: 65537 (0x10001)
-        X509v3 extensions:
-            X509v3 Subject Key Identifier: 
-                ........z.."p......e..
-            X509v3 Key Usage: critical
-                ....
-            X509v3 Subject Alternative Name: 
-                0I.*http://www.darmstadt.gmd.de/ice-tel/euroca..ice-tel-ca@darmstadt.gmd.de
-            X509v3 Basic Constraints: critical
-                0....
-    Signature Algorithm: md5WithRSAEncryption
-        76:69:61:db:b7:cf:8b:06:9e:d8:8c:96:53:d2:4d:a8:23:a6:
-        03:44:e8:8f:24:a5:c0:84:a8:4b:77:d4:2d:2b:7d:37:91:67:
-        f2:2c:ce:02:31:4c:6b:cc:ce:f2:68:a6:11:11:ab:7d:88:b8:
-        7e:22:9f:25:06:60:bd:79:30:3d
------BEGIN CERTIFICATE-----
-MIICFjCCAcCgAwIBAgIBADANBgkqhkiG9w0BAQQFADBIMSEwHwYDVQQKExhFdXJv
-cGVhbiBJQ0UtVEVMIHByb2plY3QxIzAhBgNVBAsTGlYzLUNlcnRpZmljYXRpb24g
-QXV0aG9yaXR5MB4XDTk3MDQwMjE3MzMzNloXDTk4MDQwMjE3MzMzNlowSDEhMB8G
-A1UEChMYRXVyb3BlYW4gSUNFLVRFTCBwcm9qZWN0MSMwIQYDVQQLExpWMy1DZXJ0
-aWZpY2F0aW9uIEF1dGhvcml0eTBZMAoGBFUIAQECAgIAA0sAMEgCQQCAPuuuR6n+
-EFQLgYucK4KrOmE2ZYvzc5+srHoVpxOPtMS6ow+8pViNzLGTMZ6BnowZYYb6UnNU
-0Zd2IufHn0HNAgMBAAGjgZcwgZQwHQYDVR0OBBYEFIr3yNUOx3ro1yJw4AuJ1bbs
-ZbzPMA4GA1UdDwEB/wQEAwIB9jBSBgNVHREESzBJhipodHRwOi8vd3d3LmRhcm1z
-dGFkdC5nbWQuZGUvaWNlLXRlbC9ldXJvY2GBG2ljZS10ZWwtY2FAZGFybXN0YWR0
-LmdtZC5kZTAPBgNVHRMBAf8EBTADAQH/MA0GCSqGSIb3DQEBBAUAA0EAdmlh27fP
-iwae2IyWU9JNqCOmA0TojySlwISoS3fULSt9N5Fn8izOAjFMa8zO8mimERGrfYi4
-fiKfJQZgvXkwPQ==
------END CERTIFICATE-----

certs/expired/ICE-user.pem

@@ -1,63 +0,0 @@
-Certificate:
-    Data:
-        Version: 3 (0x2)
-        Serial Number: 1 (0x1)
-        Signature Algorithm: md5WithRSAEncryption
-        Issuer: O=European ICE-TEL project, OU=V3-Certification Authority, L=Darmstadt
-        Validity
-            Not Before: Apr  2 17:35:59 1997 GMT
-            Not After : Apr  2 17:35:59 1998 GMT
-        Subject: O=European ICE-TEL project, OU=V3-Certification Authority, L=Darmstadt, CN=USER
-        Subject Public Key Info:
-            Public Key Algorithm: rsa
-            RSA Public Key: (512 bit)
-                Modulus (512 bit):
-                    00:a8:a8:53:63:49:1b:93:c3:c3:0b:6c:88:11:55:
-                    de:7e:6a:e2:f9:52:a0:dc:69:25:c4:c8:bf:55:e1:
-                    31:a8:ce:e4:a9:29:85:99:8a:15:9a:de:f6:2f:e1:
-                    b4:50:5f:5e:04:75:a6:f4:76:dc:3c:0e:39:dc:3a:
-                    be:3e:a4:61:8b
-                Exponent: 65537 (0x10001)
-        X509v3 extensions:
-            X509v3 Authority Key Identifier: 
-                0...~r..:..B.44fu......3
-            X509v3 Subject Key Identifier: 
-                ...... .*...1.*.......
-            X509v3 Key Usage: critical
-                ....
-            X509v3 Certificate Policies: critical
-                0.0...*...0.......
-            X509v3 Subject Alternative Name: 
-                0:..user@darmstadt.gmd.de.!http://www.darmstadt.gmd.de/~user
-            X509v3 Issuer Alternative Name: 
-                0....gmdca@gmd.de..http://www.gmd.de..saturn.darmstadt.gmd.de.\1!0...U.
-..European ICE-TEL project1#0!..U....V3-Certification Authority1.0...U....Darmstadt..141.12.62.26
-            X509v3 Basic Constraints: critical
-                0.
-            X509v3 CRL Distribution Points: 
-                0.0.......gmdca@gmd.de
-    Signature Algorithm: md5WithRSAEncryption
-        69:0c:e1:b7:a7:f2:d8:fb:e8:69:c0:13:cd:37:ad:21:06:22:
-        4d:e8:c6:db:f1:04:0b:b7:e0:b3:d6:0c:81:03:ce:c3:6a:3e:
-        c7:e7:24:24:a4:92:64:c2:83:83:06:42:53:0e:6f:09:1e:84:
-        9a:f7:6f:63:9b:94:99:83:d6:a4
------BEGIN CERTIFICATE-----
-MIIDTzCCAvmgAwIBAgIBATANBgkqhkiG9w0BAQQFADBcMSEwHwYDVQQKExhFdXJv
-cGVhbiBJQ0UtVEVMIHByb2plY3QxIzAhBgNVBAsTGlYzLUNlcnRpZmljYXRpb24g
-QXV0aG9yaXR5MRIwEAYDVQQHEwlEYXJtc3RhZHQwHhcNOTcwNDAyMTczNTU5WhcN
-OTgwNDAyMTczNTU5WjBrMSEwHwYDVQQKExhFdXJvcGVhbiBJQ0UtVEVMIHByb2pl
-Y3QxIzAhBgNVBAsTGlYzLUNlcnRpZmljYXRpb24gQXV0aG9yaXR5MRIwEAYDVQQH
-EwlEYXJtc3RhZHQxDTALBgNVBAMTBFVTRVIwWTAKBgRVCAEBAgICAANLADBIAkEA
-qKhTY0kbk8PDC2yIEVXefmri+VKg3GklxMi/VeExqM7kqSmFmYoVmt72L+G0UF9e
-BHWm9HbcPA453Dq+PqRhiwIDAQABo4IBmDCCAZQwHwYDVR0jBBgwFoAUfnLy+DqG
-nEKINDRmdcPU/NGiETMwHQYDVR0OBBYEFJfc4B8gjSoRmLUx4Sq/ucIYiMrPMA4G
-A1UdDwEB/wQEAwIB8DAcBgNVHSABAf8EEjAQMAYGBCoDBAUwBgYECQgHBjBDBgNV
-HREEPDA6gRV1c2VyQGRhcm1zdGFkdC5nbWQuZGWGIWh0dHA6Ly93d3cuZGFybXN0
-YWR0LmdtZC5kZS9+dXNlcjCBsQYDVR0SBIGpMIGmgQxnbWRjYUBnbWQuZGWGEWh0
-dHA6Ly93d3cuZ21kLmRlghdzYXR1cm4uZGFybXN0YWR0LmdtZC5kZaRcMSEwHwYD
-VQQKExhFdXJvcGVhbiBJQ0UtVEVMIHByb2plY3QxIzAhBgNVBAsTGlYzLUNlcnRp
-ZmljYXRpb24gQXV0aG9yaXR5MRIwEAYDVQQHEwlEYXJtc3RhZHSHDDE0MS4xMi42
-Mi4yNjAMBgNVHRMBAf8EAjAAMB0GA1UdHwQWMBQwEqAQoA6BDGdtZGNhQGdtZC5k
-ZTANBgkqhkiG9w0BAQQFAANBAGkM4ben8tj76GnAE803rSEGIk3oxtvxBAu34LPW
-DIEDzsNqPsfnJCSkkmTCg4MGQlMObwkehJr3b2OblJmD1qQ=
------END CERTIFICATE-----

certs/expired/RegTP-4R.pem

@@ -1,19 +0,0 @@
-issuer= CN=4R-CA 1:PN+0.2.262.1.10.7.20=#130131,O=Regulierungsbeh\C3\88orde f\C3\88ur Telekommunikation und Post,C=DE
-notBefore=Jan 21 16:04:53 1999 GMT
-notAfter=Jan 21 16:04:53 2004 GMT
-subject= CN=4R-CA 1:PN+0.2.262.1.10.7.20=#130131,O=Regulierungsbeh\C3\88orde f\C3\88ur Telekommunikation und Post,C=DE
------BEGIN CERTIFICATE-----
-MIICZzCCAdOgAwIBAgIEOwVn1DAKBgYrJAMDAQIFADBvMQswCQYDVQQGEwJERTE9
-MDsGA1UEChQ0UmVndWxpZXJ1bmdzYmVoyG9yZGUgZsh1ciBUZWxla29tbXVuaWth
-dGlvbiB1bmQgUG9zdDEhMAwGBwKCBgEKBxQTATEwEQYDVQQDFAo0Ui1DQSAxOlBO
-MCIYDzE5OTkwMTIxMTYwNDUzWhgPMjAwNDAxMjExNjA0NTNaMG8xCzAJBgNVBAYT
-AkRFMT0wOwYDVQQKFDRSZWd1bGllcnVuZ3NiZWjIb3JkZSBmyHVyIFRlbGVrb21t
-dW5pa2F0aW9uIHVuZCBQb3N0MSEwDAYHAoIGAQoHFBMBMTARBgNVBAMUCjRSLUNB
-IDE6UE4wgZ8wDQYJKoZIhvcNAQEBBQADgY0AMIGJAoGAjzHbq2asUlqeWbXTQHso
-aVF6YIPVH3c/B2cbuy9HJ/lnE6x0asOzM2DGDqi47xkdAxPc0LZ0fxO87rkmz7xs
-jJObnVrMXpyUSDSp5Y0wqKJdsFdr6mGFOQZteIti8AJnr8xMkwnWVyuOlEXsFe1h
-5gxwQXrOcPinE6qu1t/3PmECBMAAAAGjEjAQMA4GA1UdDwEB/wQEAwIBBjAKBgYr
-JAMDAQIFAAOBgQA+RdocBmA2VV9E5aKPBcp01tdZAvvW9Tve3docArVKR/4/yvSX
-Z+wvzzk+uu4qBp49HN3nqPYMrzbTmjBFu4ce5fkZ7dHF0W1sSBL0rox5z36Aq2re
-JjfEOEmSnNe0+opuh4FSVOssXblXTE8lEQU0FhhItgDx2ADnWZibaxLG4w==
------END CERTIFICATE-----

certs/expired/factory.pem

@@ -1,15 +0,0 @@
------BEGIN CERTIFICATE-----
-MIICTTCCAbagAwIBAgIBADANBgkqhkiG9w0BAQQFADBMMQswCQYDVQQGEwJHQjEM
-MAoGA1UEChMDVUNMMRgwFgYDVQQLEw9JQ0UtVEVMIFByb2plY3QxFTATBgNVBAMT
-DFRydXN0RmFjdG9yeTAeFw05NzA0MjIxNDM5MTRaFw05ODA0MjIxNDM5MTRaMEwx
-CzAJBgNVBAYTAkdCMQwwCgYDVQQKEwNVQ0wxGDAWBgNVBAsTD0lDRS1URUwgUHJv
-amVjdDEVMBMGA1UEAxMMVHJ1c3RGYWN0b3J5MIGcMAoGBFUIAQECAgQAA4GNADCB
-iQKBgQCEieR8NcXkUW1f0G6aC6u0i8q/98JqS6RxK5YmHIGKCkuTWAUjzLfUa4dt
-U9igGCjTuxaDqlzEim+t/02pmiBZT9HaX++35MjQPUWmsChcYU5WyzGErXi+rQaw
-zlwS73zM8qiPj/97lXYycWhgL0VaiDSPxRXEUdWoaGruom4mNQIDAQABo0IwQDAd
-BgNVHQ4EFgQUHal1LZr7oVg5z6lYzrhTgZRCmcUwDgYDVR0PAQH/BAQDAgH2MA8G
-A1UdEwEB/wQFMAMBAf8wDQYJKoZIhvcNAQEEBQADgYEAfaggfl6FZoioecjv0dq8
-/DXo/u11iMZvXn08gjX/zl2b4wtPbShOSY5FhkSm8GeySasz+/Nwb/uzfnIhokWi
-lfPZHtlCWtXbIy/TN51eJyq04ceDCQDWvLC2enVg9KB+GJ34b5c5VaPRzq8MBxsA
-S7ELuYGtmYgYm9NZOIr7yU0=
------END CERTIFICATE-----

certs/expired/rsa-cca.pem

@@ -1,19 +0,0 @@
-subject=/C=US/O=RSA Data Security, Inc./OU=Commercial Certification Authority
-issuer= /C=US/O=RSA Data Security, Inc./OU=Commercial Certification Authority
-notBefore=941104185834Z
-notAfter =991103185834Z
------BEGIN X509 CERTIFICATE-----
-
-MIICIzCCAZACBQJBAAAWMA0GCSqGSIb3DQEBAgUAMFwxCzAJBgNVBAYTAlVTMSAw
-HgYDVQQKExdSU0EgRGF0YSBTZWN1cml0eSwgSW5jLjErMCkGA1UECxMiQ29tbWVy
-Y2lhbCBDZXJ0aWZpY2F0aW9uIEF1dGhvcml0eTAeFw05NDExMDQxODU4MzRaFw05
-OTExMDMxODU4MzRaMFwxCzAJBgNVBAYTAlVTMSAwHgYDVQQKExdSU0EgRGF0YSBT
-ZWN1cml0eSwgSW5jLjErMCkGA1UECxMiQ29tbWVyY2lhbCBDZXJ0aWZpY2F0aW9u
-IEF1dGhvcml0eTCBmzANBgkqhkiG9w0BAQEFAAOBiQAwgYUCfgCk+4Fie84QJ93o
-975sbsZwmdu41QUDaSiCnHJ/lj+O7Kwpkj+KFPhCdr69XQO5kNTQvAayUTNfxMK/
-touPmbZiImDd298ggrTKoi8tUO2UMt7gVY3UaOLgTNLNBRYulWZcYVI4HlGogqHE
-7yXpCuaLK44xZtn42f29O2nZ6wIDAQABMA0GCSqGSIb3DQEBAgUAA34AdrW2EP4j
-9/dZYkuwX5zBaLxJu7NJbyFHXSudVMQAKD+YufKKg5tgf+tQx6sFEC097TgCwaVI
-0v5loMC86qYjFmZsGySp8+x5NRhPJsjjr1BKx6cxa9B8GJ1Qv6km+iYrRpwUqbtb
-MJhCKLVLU7tDCZJAuqiqWqTGtotXTcU=
------END X509 CERTIFICATE-----

certs/expired/rsa-ssca.pem

@@ -1,19 +0,0 @@
-subject=/C=US/O=RSA Data Security, Inc./OU=Secure Server Certification Authority
-issuer= /C=US/O=RSA Data Security, Inc./OU=Secure Server Certification Authority
-notBefore=941109235417Z
-notAfter =991231235417Z
------BEGIN X509 CERTIFICATE-----
-
-MIICKTCCAZYCBQJBAAABMA0GCSqGSIb3DQEBAgUAMF8xCzAJBgNVBAYTAlVTMSAw
-HgYDVQQKExdSU0EgRGF0YSBTZWN1cml0eSwgSW5jLjEuMCwGA1UECxMlU2VjdXJl
-IFNlcnZlciBDZXJ0aWZpY2F0aW9uIEF1dGhvcml0eTAeFw05NDExMDkyMzU0MTda
-Fw05OTEyMzEyMzU0MTdaMF8xCzAJBgNVBAYTAlVTMSAwHgYDVQQKExdSU0EgRGF0
-YSBTZWN1cml0eSwgSW5jLjEuMCwGA1UECxMlU2VjdXJlIFNlcnZlciBDZXJ0aWZp
-Y2F0aW9uIEF1dGhvcml0eTCBmzANBgkqhkiG9w0BAQEFAAOBiQAwgYUCfgCSznrB
-roM+WqqJg1esJQF2DK2ujiw3zus1eGRUA+WEQFHJv48I4oqCCNIWhjdV6bEhAq12
-aIGaBaJLyUslZiJWbIgHj/eBWW2EB2VwE3F2Ppt3TONQiVaYSLkdpykaEy5KEVmc
-HhXVSVQsczppgrGXOZxtcGdI5d0t1sgeewIDAQABMA0GCSqGSIb3DQEBAgUAA34A
-iNHReSHO4ovo+MF9NFM/YYPZtgs4F7boviGNjwC4i1N+RGceIr2XJ+CchcxK9oU7
-suK+ktPlDemvXA4MRpX/oRxePug2WHpzpgr4IhFrwwk4fia7c+8AvQKk8xQNMD9h
-cHsg/jKjn7P0Z1LctO6EjJY2IN6BCINxIYoPnqk=
------END X509 CERTIFICATE-----

certs/expired/vsign2.pem

@@ -1,18 +0,0 @@
-subject=/C=US/O=VeriSign, Inc./OU=Class 2 Public Primary Certification Authority
-notBefore=Jan 29 00:00:00 1996 GMT
-notAfter=Jan  7 23:59:59 2004 GMT
------BEGIN CERTIFICATE-----
-MIICPTCCAaYCEQC6WslMBTuS1qe2307QU5INMA0GCSqGSIb3DQEBAgUAMF8xCzAJ
-BgNVBAYTAlVTMRcwFQYDVQQKEw5WZXJpU2lnbiwgSW5jLjE3MDUGA1UECxMuQ2xh
-c3MgMiBQdWJsaWMgUHJpbWFyeSBDZXJ0aWZpY2F0aW9uIEF1dGhvcml0eTAeFw05
-NjAxMjkwMDAwMDBaFw0wNDAxMDcyMzU5NTlaMF8xCzAJBgNVBAYTAlVTMRcwFQYD
-VQQKEw5WZXJpU2lnbiwgSW5jLjE3MDUGA1UECxMuQ2xhc3MgMiBQdWJsaWMgUHJp
-bWFyeSBDZXJ0aWZpY2F0aW9uIEF1dGhvcml0eTCBnzANBgkqhkiG9w0BAQEFAAOB
-jQAwgYkCgYEAtlqLow1qI4OAa885h/QhEzMGTCWi7VUSl8WngLn6g8EgoPovFQ18
-oWBrfnks+gYPOq72G2+x0v8vKFJfg31LxHq3+GYfgFT8t8KOWUoUV0bRmpO+QZED
-uxWAk1zr58wIbD8+s0r8/0tsI9VQgiZEGY4jw3HqGSRHBJ51v8imAB8CAwEAATAN
-BgkqhkiG9w0BAQIFAAOBgQC2AB+TV6QHp0DOZUA/VV7t7/pUSaUw1iF8YYfug5ML
-v7Qz8pisnwa/TqjOFIFMywROWMPPX+5815pvy0GKt3+BuP+EYcYnQ2UdDOyxAArd
-G6S7x3ggKLKi3TaVLuFUT79guXdoEZkj6OpS6KoATmdOu5C1RZtG644W78QzWzM9
-1Q==
------END CERTIFICATE-----

certs/expired/vsign3.pem

@@ -1,18 +0,0 @@
-subject=/C=US/O=VeriSign, Inc./OU=Class 3 Public Primary Certification Authority
-notBefore=Jan 29 00:00:00 1996 GMT
-notAfter=Jan  7 23:59:59 2004 GMT
------BEGIN CERTIFICATE-----
-MIICPTCCAaYCEQDknv3zOugOz6URPhmkJAIyMA0GCSqGSIb3DQEBAgUAMF8xCzAJ
-BgNVBAYTAlVTMRcwFQYDVQQKEw5WZXJpU2lnbiwgSW5jLjE3MDUGA1UECxMuQ2xh
-c3MgMyBQdWJsaWMgUHJpbWFyeSBDZXJ0aWZpY2F0aW9uIEF1dGhvcml0eTAeFw05
-NjAxMjkwMDAwMDBaFw0wNDAxMDcyMzU5NTlaMF8xCzAJBgNVBAYTAlVTMRcwFQYD
-VQQKEw5WZXJpU2lnbiwgSW5jLjE3MDUGA1UECxMuQ2xhc3MgMyBQdWJsaWMgUHJp
-bWFyeSBDZXJ0aWZpY2F0aW9uIEF1dGhvcml0eTCBnzANBgkqhkiG9w0BAQEFAAOB
-jQAwgYkCgYEAyVxZnvIbigEUtBDfBEDb41evakVAj4QMC9Ez2dkRz+4CWB8l9yqo
-RAWq7AMfeH+ek7maAKojfdashaJjRcdyJ8z0TMZ1cdI5709C8HXfCpDGjiBvmA/4
-rCNfcCk2pMmG57GaIMtTpYXnPb59mv4kRTPcdhXtD6JxZExlLoFoRacCAwEAATAN
-BgkqhkiG9w0BAQIFAAOBgQBhcOwvP579K+ZoVCGwZ3kIDCCWMYoNer62Jt95LCJp
-STbjl3diYaIy13pUITa6Ask05yXaRDWw0lyAXbOU+Pms7qRgdSoflUkjsUp89LNH
-ciFbfperVKxi513srpvSybIk+4Kt6WcVS7qqpvCXoPawl1cAyAw8CaCCBLpB2veZ
-pA==
------END CERTIFICATE-----