Small fault corrected

The tag will be OpenSSL_0_9_6h.

CHANGES

@@ -2,6 +2,909 @@
  OpenSSL CHANGES
  _______________
 
+ Changes between 0.9.6g and 0.9.6h  [21 Dec 2002]
+
+  *) New function OPENSSL_cleanse(), which is used to cleanse a section of
+     memory from it's contents.  This is done with a counter that will
+     place alternating values in each byte.  This can be used to solve
+     two issues: 1) the removal of calls to memset() by highly optimizing
+     compilers, and 2) cleansing with other values than 0, since those can
+     be read through on certain media, for example a swap space on disk.
+     [Geoff Thorpe]
+
+  *) Bugfix: client side session caching did not work with external caching,
+     because the session->cipher setting was not restored when reloading
+     from the external cache. This problem was masked, when
+     SSL_OP_NETSCAPE_REUSE_CIPHER_CHANGE_BUG (part of SSL_OP_ALL) was set.
+     (Found by Steve Haslam <steve@araqnid.ddts.net>.)
+     [Lutz Jaenicke]
+
+  *) Fix client_certificate (ssl/s2_clnt.c): The permissible total
+     length of the REQUEST-CERTIFICATE message is 18 .. 34, not 17 .. 33.
+     [Zeev Lieber <zeev-l@yahoo.com>]
+
+  *) Undo an undocumented change introduced in 0.9.6e which caused
+     repeated calls to OpenSSL_add_all_ciphers() and 
+     OpenSSL_add_all_digests() to be ignored, even after calling
+     EVP_cleanup().
+     [Richard Levitte]
+
+  *) Change the default configuration reader to deal with last line not
+     being properly terminated.
+     [Richard Levitte]
+
+  *) Change X509_NAME_cmp() so it applies the special rules on handling
+     DN values that are of type PrintableString, as well as RDNs of type
+     emailAddress where the value has the type ia5String.
+     [stefank@valicert.com via Richard Levitte]
+
+  *) Add a SSL_SESS_CACHE_NO_INTERNAL_STORE flag to take over half
+     the job SSL_SESS_CACHE_NO_INTERNAL_LOOKUP was inconsistently
+     doing, define a new flag (SSL_SESS_CACHE_NO_INTERNAL) to be
+     the bitwise-OR of the two for use by the majority of applications
+     wanting this behaviour, and update the docs. The documented
+     behaviour and actual behaviour were inconsistent and had been
+     changing anyway, so this is more a bug-fix than a behavioural
+     change.
+     [Geoff Thorpe, diagnosed by Nadav Har'El]
+
+  *) Don't impose a 16-byte length minimum on session IDs in ssl/s3_clnt.c
+     (the SSL 3.0 and TLS 1.0 specifications allow any length up to 32 bytes).
+     [Bodo Moeller]
+
+  *) Fix initialization code race conditions in
+        SSLv23_method(),  SSLv23_client_method(),   SSLv23_server_method(),
+        SSLv2_method(),   SSLv2_client_method(),    SSLv2_server_method(),
+        SSLv3_method(),   SSLv3_client_method(),    SSLv3_server_method(),
+        TLSv1_method(),   TLSv1_client_method(),    TLSv1_server_method(),
+        ssl2_get_cipher_by_char(),
+        ssl3_get_cipher_by_char().
+     [Patrick McCormick <patrick@tellme.com>, Bodo Moeller]
+
+  *) Reorder cleanup sequence in SSL_CTX_free(): only remove the ex_data after
+     the cached sessions are flushed, as the remove_cb() might use ex_data
+     contents. Bug found by Sam Varshavchik <mrsam@courier-mta.com>
+     (see [openssl.org #212]).
+     [Geoff Thorpe, Lutz Jaenicke]
+
+  *) Fix typo in OBJ_txt2obj which incorrectly passed the content
+     length, instead of the encoding length to d2i_ASN1_OBJECT.
+     [Steve Henson]
+
+ Changes between 0.9.6f and 0.9.6g  [9 Aug 2002]
+
+  *) [In 0.9.6g-engine release:]
+     Fix crypto/engine/vendor_defns/cswift.h for WIN32 (use '_stdcall').
+     [Lynn Gazis <lgazis@rainbow.com>]
+
+ Changes between 0.9.6e and 0.9.6f  [8 Aug 2002]
+
+  *) Fix ASN1 checks. Check for overflow by comparing with LONG_MAX
+     and get fix the header length calculation.
+     [Florian Weimer <Weimer@CERT.Uni-Stuttgart.DE>,
+	Alon Kantor <alonk@checkpoint.com> (and others),
+	Steve Henson]
+
+  *) Use proper error handling instead of 'assertions' in buffer
+     overflow checks added in 0.9.6e.  This prevents DoS (the
+     assertions could call abort()).
+     [Arne Ansper <arne@ats.cyber.ee>, Bodo Moeller]
+
+ Changes between 0.9.6d and 0.9.6e  [30 Jul 2002]
+
+  *) Add various sanity checks to asn1_get_length() to reject
+     the ASN1 length bytes if they exceed sizeof(long), will appear
+     negative or the content length exceeds the length of the
+     supplied buffer.
+     [Steve Henson, Adi Stav <stav@mercury.co.il>, James Yonan <jim@ntlp.com>]
+
+  *) Fix cipher selection routines: ciphers without encryption had no flags
+     for the cipher strength set and where therefore not handled correctly
+     by the selection routines (PR #130).
+     [Lutz Jaenicke]
+
+  *) Fix EVP_dsa_sha macro.
+     [Nils Larsch]
+
+  *) New option
+          SSL_OP_DONT_INSERT_EMPTY_FRAGMENTS
+     for disabling the SSL 3.0/TLS 1.0 CBC vulnerability countermeasure
+     that was added in OpenSSL 0.9.6d.
+
+     As the countermeasure turned out to be incompatible with some
+     broken SSL implementations, the new option is part of SSL_OP_ALL.
+     SSL_OP_ALL is usually employed when compatibility with weird SSL
+     implementations is desired (e.g. '-bugs' option to 's_client' and
+     's_server'), so the new option is automatically set in many
+     applications.
+     [Bodo Moeller]
+
+  *) Changes in security patch:
+
+     Changes marked "(CHATS)" were sponsored by the Defense Advanced
+     Research Projects Agency (DARPA) and Air Force Research Laboratory,
+     Air Force Materiel Command, USAF, under agreement number
+     F30602-01-2-0537.
+
+  *) Add various sanity checks to asn1_get_length() to reject
+     the ASN1 length bytes if they exceed sizeof(long), will appear
+     negative or the content length exceeds the length of the
+     supplied buffer. (CAN-2002-0659)
+     [Steve Henson, Adi Stav <stav@mercury.co.il>, James Yonan <jim@ntlp.com>]
+
+  *) Assertions for various potential buffer overflows, not known to
+     happen in practice.
+     [Ben Laurie (CHATS)]
+
+  *) Various temporary buffers to hold ASCII versions of integers were
+     too small for 64 bit platforms. (CAN-2002-0655)
+     [Matthew Byng-Maddick <mbm@aldigital.co.uk> and Ben Laurie (CHATS)>
+
+  *) Remote buffer overflow in SSL3 protocol - an attacker could
+     supply an oversized session ID to a client. (CAN-2002-0656)
+     [Ben Laurie (CHATS)]
+
+  *) Remote buffer overflow in SSL2 protocol - an attacker could
+     supply an oversized client master key. (CAN-2002-0656)
+     [Ben Laurie (CHATS)]
+
+ Changes between 0.9.6c and 0.9.6d  [9 May 2002]
+
+  *) Fix crypto/asn1/a_sign.c so that 'parameters' is omitted (not
+     encoded as NULL) with id-dsa-with-sha1.
+     [Nils Larsch <nla@trustcenter.de>; problem pointed out by Bodo Moeller]
+
+  *) Check various X509_...() return values in apps/req.c.
+     [Nils Larsch <nla@trustcenter.de>]
+
+  *) Fix BASE64 decode (EVP_DecodeUpdate) for data with CR/LF ended lines:
+     an end-of-file condition would erronously be flagged, when the CRLF
+     was just at the end of a processed block. The bug was discovered when
+     processing data through a buffering memory BIO handing the data to a
+     BASE64-decoding BIO. Bug fund and patch submitted by Pavel Tsekov
+     <ptsekov@syntrex.com> and Nedelcho Stanev.
+     [Lutz Jaenicke]
+
+  *) Implement a countermeasure against a vulnerability recently found
+     in CBC ciphersuites in SSL 3.0/TLS 1.0: Send an empty fragment
+     before application data chunks to avoid the use of known IVs
+     with data potentially chosen by the attacker.
+     [Bodo Moeller]
+
+  *) Fix length checks in ssl3_get_client_hello().
+     [Bodo Moeller]
+
+  *) TLS/SSL library bugfix: use s->s3->in_read_app_data differently
+     to prevent ssl3_read_internal() from incorrectly assuming that
+     ssl3_read_bytes() found application data while handshake
+     processing was enabled when in fact s->s3->in_read_app_data was
+     merely automatically cleared during the initial handshake.
+     [Bodo Moeller; problem pointed out by Arne Ansper <arne@ats.cyber.ee>]
+
+  *) Fix object definitions for Private and Enterprise: they were not
+     recognized in their shortname (=lowercase) representation. Extend
+     obj_dat.pl to issue an error when using undefined keywords instead
+     of silently ignoring the problem (Svenning Sorensen
+     <sss@sss.dnsalias.net>).
+     [Lutz Jaenicke]
+
+  *) Fix DH_generate_parameters() so that it works for 'non-standard'
+     generators, i.e. generators other than 2 and 5.  (Previously, the
+     code did not properly initialise the 'add' and 'rem' values to
+     BN_generate_prime().)
+
+     In the new general case, we do not insist that 'generator' is
+     actually a primitive root: This requirement is rather pointless;
+     a generator of the order-q subgroup is just as good, if not
+     better.
+     [Bodo Moeller]
+ 
+  *) Map new X509 verification errors to alerts. Discovered and submitted by
+     Tom Wu <tom@arcot.com>.
+     [Lutz Jaenicke]
+
+  *) Fix ssl3_pending() (ssl/s3_lib.c) to prevent SSL_pending() from
+     returning non-zero before the data has been completely received
+     when using non-blocking I/O.
+     [Bodo Moeller; problem pointed out by John Hughes]
+
+  *) Some of the ciphers missed the strength entry (SSL_LOW etc).
+     [Ben Laurie, Lutz Jaenicke]
+
+  *) Fix bug in SSL_clear(): bad sessions were not removed (found by
+     Yoram Zahavi <YoramZ@gilian.com>).
+     [Lutz Jaenicke]
+
+  *) Add information about CygWin 1.3 and on, and preserve proper
+     configuration for the versions before that.
+     [Corinna Vinschen <vinschen@redhat.com> and Richard Levitte]
+
+  *) Make removal from session cache (SSL_CTX_remove_session()) more robust:
+     check whether we deal with a copy of a session and do not delete from
+     the cache in this case. Problem reported by "Izhar Shoshani Levi"
+     <izhar@checkpoint.com>.
+     [Lutz Jaenicke]
+
+  *) Do not store session data into the internal session cache, if it
+     is never intended to be looked up (SSL_SESS_CACHE_NO_INTERNAL_LOOKUP
+     flag is set). Proposed by Aslam <aslam@funk.com>.
+     [Lutz Jaenicke]
+
+  *) Have ASN1_BIT_STRING_set_bit() really clear a bit when the requested
+     value is 0.
+     [Richard Levitte]
+
+  *) [In 0.9.6d-engine release:]
+     Fix a crashbug and a logic bug in hwcrhk_load_pubkey().
+     [Toomas Kiisk <vix@cyber.ee> via Richard Levitte]
+
+  *) Add the configuration target linux-s390x.
+     [Neale Ferguson <Neale.Ferguson@SoftwareAG-USA.com> via Richard Levitte]
+
+  *) The earlier bugfix for the SSL3_ST_SW_HELLO_REQ_C case of
+     ssl3_accept (ssl/s3_srvr.c) incorrectly used a local flag
+     variable as an indication that a ClientHello message has been
+     received.  As the flag value will be lost between multiple
+     invocations of ssl3_accept when using non-blocking I/O, the
+     function may not be aware that a handshake has actually taken
+     place, thus preventing a new session from being added to the
+     session cache.
+
+     To avoid this problem, we now set s->new_session to 2 instead of
+     using a local variable.
+     [Lutz Jaenicke, Bodo Moeller]
+
+  *) Bugfix: Return -1 from ssl3_get_server_done (ssl3/s3_clnt.c)
+     if the SSL_R_LENGTH_MISMATCH error is detected.
+     [Geoff Thorpe, Bodo Moeller]
+
+  *) New 'shared_ldflag' column in Configure platform table.
+     [Richard Levitte]
+
+  *) Fix EVP_CIPHER_mode macro.
+     ["Dan S. Camper" <dan@bti.net>]
+
+  *) Fix ssl3_read_bytes (ssl/s3_pkt.c): To ignore messages of unknown
+     type, we must throw them away by setting rr->length to 0.
+     [D P Chang <dpc@qualys.com>]
+
+ Changes between 0.9.6b and 0.9.6c  [21 dec 2001]
+
+  *) Fix BN_rand_range bug pointed out by Dominikus Scherkl
+     <Dominikus.Scherkl@biodata.com>.  (The previous implementation
+     worked incorrectly for those cases where  range = 10..._2  and
+     3*range  is two bits longer than  range.)
+     [Bodo Moeller]
+
+  *) Only add signing time to PKCS7 structures if it is not already
+     present.
+     [Steve Henson]
+
+  *) Fix crypto/objects/objects.h: "ld-ce" should be "id-ce",
+     OBJ_ld_ce should be OBJ_id_ce.
+     Also some ip-pda OIDs in crypto/objects/objects.txt were
+     incorrect (cf. RFC 3039).
+     [Matt Cooper, Frederic Giudicelli, Bodo Moeller]
+
+  *) Release CRYPTO_LOCK_DYNLOCK when CRYPTO_destroy_dynlockid()
+     returns early because it has nothing to do.
+     [Andy Schneider <andy.schneider@bjss.co.uk>]
+
+  *) [In 0.9.6c-engine release:]
+     Fix mutex callback return values in crypto/engine/hw_ncipher.c.
+     [Andy Schneider <andy.schneider@bjss.co.uk>]
+
+  *) [In 0.9.6c-engine release:]
+     Add support for Cryptographic Appliance's keyserver technology.
+     (Use engine 'keyclient')
+     [Cryptographic Appliances and Geoff Thorpe]
+
+  *) Add a configuration entry for OS/390 Unix.  The C compiler 'c89'
+     is called via tools/c89.sh because arguments have to be
+     rearranged (all '-L' options must appear before the first object
+     modules).
+     [Richard Shapiro <rshapiro@abinitio.com>]
+
+  *) [In 0.9.6c-engine release:]
+     Add support for Broadcom crypto accelerator cards, backported
+     from 0.9.7.
+     [Broadcom, Nalin Dahyabhai <nalin@redhat.com>, Mark Cox]
+
+  *) [In 0.9.6c-engine release:]
+     Add support for SureWare crypto accelerator cards from 
+     Baltimore Technologies.  (Use engine 'sureware')
+     [Baltimore Technologies and Mark Cox]
+
+  *) [In 0.9.6c-engine release:]
+     Add support for crypto accelerator cards from Accelerated
+     Encryption Processing, www.aep.ie.  (Use engine 'aep')
+     [AEP Inc. and Mark Cox]
+
+  *) Add a configuration entry for gcc on UnixWare.
+     [Gary Benson <gbenson@redhat.com>]
+
+  *) Change ssl/s2_clnt.c and ssl/s2_srvr.c so that received handshake
+     messages are stored in a single piece (fixed-length part and
+     variable-length part combined) and fix various bugs found on the way.
+     [Bodo Moeller]
+
+  *) Disable caching in BIO_gethostbyname(), directly use gethostbyname()
+     instead.  BIO_gethostbyname() does not know what timeouts are
+     appropriate, so entries would stay in cache even when they have
+     become invalid.
+     [Bodo Moeller; problem pointed out by Rich Salz <rsalz@zolera.com>
+
+  *) Change ssl23_get_client_hello (ssl/s23_srvr.c) behaviour when
+     faced with a pathologically small ClientHello fragment that does
+     not contain client_version: Instead of aborting with an error,
+     simply choose the highest available protocol version (i.e.,
+     TLS 1.0 unless it is disabled).  In practice, ClientHello
+     messages are never sent like this, but this change gives us
+     strictly correct behaviour at least for TLS.
+     [Bodo Moeller]
+
+  *) Fix SSL handshake functions and SSL_clear() such that SSL_clear()
+     never resets s->method to s->ctx->method when called from within
+     one of the SSL handshake functions.
+     [Bodo Moeller; problem pointed out by Niko Baric]
+
+  *) In ssl3_get_client_hello (ssl/s3_srvr.c), generate a fatal alert
+     (sent using the client's version number) if client_version is
+     smaller than the protocol version in use.  Also change
+     ssl23_get_client_hello (ssl/s23_srvr.c) to select TLS 1.0 if
+     the client demanded SSL 3.0 but only TLS 1.0 is enabled; then
+     the client will at least see that alert.
+     [Bodo Moeller]
+
+  *) Fix ssl3_get_message (ssl/s3_both.c) to handle message fragmentation
+     correctly.
+     [Bodo Moeller]
+
+  *) Avoid infinite loop in ssl3_get_message (ssl/s3_both.c) if a
+     client receives HelloRequest while in a handshake.
+     [Bodo Moeller; bug noticed by Andy Schneider <andy.schneider@bjss.co.uk>]
+
+  *) Bugfix in ssl3_accept (ssl/s3_srvr.c): Case SSL3_ST_SW_HELLO_REQ_C
+     should end in 'break', not 'goto end' which circuments various
+     cleanups done in state SSL_ST_OK.   But session related stuff
+     must be disabled for SSL_ST_OK in the case that we just sent a
+     HelloRequest.
+
+     Also avoid some overhead by not calling ssl_init_wbio_buffer()
+     before just sending a HelloRequest.
+     [Bodo Moeller, Eric Rescorla <ekr@rtfm.com>]
+
+  *) Fix ssl/s3_enc.c, ssl/t1_enc.c and ssl/s3_pkt.c so that we don't
+     reveal whether illegal block cipher padding was found or a MAC
+     verification error occured.  (Neither SSLerr() codes nor alerts
+     are directly visible to potential attackers, but the information
+     may leak via logfiles.)
+
+     Similar changes are not required for the SSL 2.0 implementation
+     because the number of padding bytes is sent in clear for SSL 2.0,
+     and the extra bytes are just ignored.  However ssl/s2_pkt.c
+     failed to verify that the purported number of padding bytes is in
+     the legal range.
+     [Bodo Moeller]
+
+  *) Add OpenUNIX-8 support including shared libraries
+     (Boyd Lynn Gerber <gerberb@zenez.com>).
+     [Lutz Jaenicke]
+
+  *) Improve RSA_padding_check_PKCS1_OAEP() check again to avoid
+     'wristwatch attack' using huge encoding parameters (cf.
+     James H. Manger's CRYPTO 2001 paper).  Note that the
+     RSA_PKCS1_OAEP_PADDING case of RSA_private_decrypt() does not use
+     encoding parameters and hence was not vulnerable.
+     [Bodo Moeller]
+
+  *) BN_sqr() bug fix.
+     [Ulf M<>ller, reported by Jim Ellis <jim.ellis@cavium.com>]
+
+  *) Rabin-Miller test analyses assume uniformly distributed witnesses,
+     so use BN_pseudo_rand_range() instead of using BN_pseudo_rand()
+     followed by modular reduction.
+     [Bodo Moeller; pointed out by Adam Young <AYoung1@NCSUS.JNJ.COM>]
+
+  *) Add BN_pseudo_rand_range() with obvious functionality: BN_rand_range()
+     equivalent based on BN_pseudo_rand() instead of BN_rand().
+     [Bodo Moeller]
+
+  *) s3_srvr.c: allow sending of large client certificate lists (> 16 kB).
+     This function was broken, as the check for a new client hello message
+     to handle SGC did not allow these large messages.
+     (Tracked down by "Douglas E. Engert" <deengert@anl.gov>.)
+     [Lutz Jaenicke]
+
+  *) Add alert descriptions for TLSv1 to SSL_alert_desc_string[_long]().
+     [Lutz Jaenicke]
+
+  *) Fix buggy behaviour of BIO_get_num_renegotiates() and BIO_ctrl()
+     for BIO_C_GET_WRITE_BUF_SIZE ("Stephen Hinton" <shinton@netopia.com>).
+     [Lutz Jaenicke]
+
+  *) Rework the configuration and shared library support for Tru64 Unix.
+     The configuration part makes use of modern compiler features and
+     still retains old compiler behavior for those that run older versions
+     of the OS.  The shared library support part includes a variant that
+     uses the RPATH feature, and is available through the special
+     configuration target "alpha-cc-rpath", which will never be selected
+     automatically.
+     [Tim Mooney <mooney@dogbert.cc.ndsu.NoDak.edu> via Richard Levitte]
+
+  *) In ssl3_get_key_exchange (ssl/s3_clnt.c), call ssl3_get_message()
+     with the same message size as in ssl3_get_certificate_request().
+     Otherwise, if no ServerKeyExchange message occurs, CertificateRequest
+     messages might inadvertently be reject as too long.
+     [Petr Lampa <lampa@fee.vutbr.cz>]
+
+  *) Enhanced support for IA-64 Unix platforms (well, Linux and HP-UX).
+     [Andy Polyakov]
+
+  *) Modified SSL library such that the verify_callback that has been set
+     specificly for an SSL object with SSL_set_verify() is actually being
+     used. Before the change, a verify_callback set with this function was
+     ignored and the verify_callback() set in the SSL_CTX at the time of
+     the call was used. New function X509_STORE_CTX_set_verify_cb() introduced
+     to allow the necessary settings.
+     [Lutz Jaenicke]
+
+  *) Initialize static variable in crypto/dsa/dsa_lib.c and crypto/dh/dh_lib.c
+     explicitly to NULL, as at least on Solaris 8 this seems not always to be
+     done automatically (in contradiction to the requirements of the C
+     standard). This made problems when used from OpenSSH.
+     [Lutz Jaenicke]
+
+  *) In OpenSSL 0.9.6a and 0.9.6b, crypto/dh/dh_key.c ignored
+     dh->length and always used
+
+          BN_rand_range(priv_key, dh->p).
+
+     BN_rand_range() is not necessary for Diffie-Hellman, and this
+     specific range makes Diffie-Hellman unnecessarily inefficient if
+     dh->length (recommended exponent length) is much smaller than the
+     length of dh->p.  We could use BN_rand_range() if the order of
+     the subgroup was stored in the DH structure, but we only have
+     dh->length.
+
+     So switch back to
+
+          BN_rand(priv_key, l, ...)
+
+     where 'l' is dh->length if this is defined, or BN_num_bits(dh->p)-1
+     otherwise.
+     [Bodo Moeller]
+
+  *) In
+
+          RSA_eay_public_encrypt
+          RSA_eay_private_decrypt
+          RSA_eay_private_encrypt (signing)
+          RSA_eay_public_decrypt (signature verification)
+
+     (default implementations for RSA_public_encrypt,
+     RSA_private_decrypt, RSA_private_encrypt, RSA_public_decrypt),
+     always reject numbers >= n.
+     [Bodo Moeller]
+
+  *) In crypto/rand/md_rand.c, use a new short-time lock CRYPTO_LOCK_RAND2
+     to synchronize access to 'locking_thread'.  This is necessary on
+     systems where access to 'locking_thread' (an 'unsigned long'
+     variable) is not atomic.
+     [Bodo Moeller]
+
+  *) In crypto/rand/md_rand.c, set 'locking_thread' to current thread's ID
+     *before* setting the 'crypto_lock_rand' flag.  The previous code had
+     a race condition if 0 is a valid thread ID.
+     [Travis Vitek <vitek@roguewave.com>]
+
+  *) Add support for shared libraries under Irix.
+     [Albert Chin-A-Young <china@thewrittenword.com>]
+
+  *) Add configuration option to build on Linux on both big-endian and
+     little-endian MIPS.
+     [Ralf Baechle <ralf@uni-koblenz.de>]
+
+  *) Add the possibility to create shared libraries on HP-UX.
+     [Richard Levitte]
+
+ Changes between 0.9.6a and 0.9.6b  [9 Jul 2001]
+
+  *) Change ssleay_rand_bytes (crypto/rand/md_rand.c)
+     to avoid a SSLeay/OpenSSL PRNG weakness pointed out by
+     Markku-Juhani O. Saarinen <markku-juhani.saarinen@nokia.com>:
+     PRNG state recovery was possible based on the output of
+     one PRNG request appropriately sized to gain knowledge on
+     'md' followed by enough consecutive 1-byte PRNG requests
+     to traverse all of 'state'.
+
+     1. When updating 'md_local' (the current thread's copy of 'md')
+        during PRNG output generation, hash all of the previous
+        'md_local' value, not just the half used for PRNG output.
+
+     2. Make the number of bytes from 'state' included into the hash
+        independent from the number of PRNG bytes requested.
+
+     The first measure alone would be sufficient to avoid
+     Markku-Juhani's attack.  (Actually it had never occurred
+     to me that the half of 'md_local' used for chaining was the
+     half from which PRNG output bytes were taken -- I had always
+     assumed that the secret half would be used.)  The second
+     measure makes sure that additional data from 'state' is never
+     mixed into 'md_local' in small portions; this heuristically
+     further strengthens the PRNG.
+     [Bodo Moeller]
+
+  *) Fix crypto/bn/asm/mips3.s.
+     [Andy Polyakov]
+
+  *) When only the key is given to "enc", the IV is undefined. Print out
+     an error message in this case.
+     [Lutz Jaenicke]
+
+  *) Handle special case when X509_NAME is empty in X509 printing routines.
+     [Steve Henson]
+
+  *) In dsa_do_verify (crypto/dsa/dsa_ossl.c), verify that r and s are
+     positive and less than q.
+     [Bodo Moeller]
+
+  *) Don't change *pointer in CRYPTO_add_lock() is add_lock_callback is
+     used: it isn't thread safe and the add_lock_callback should handle
+     that itself.
+     [Paul Rose <Paul.Rose@bridge.com>]
+
+  *) Verify that incoming data obeys the block size in
+     ssl3_enc (ssl/s3_enc.c) and tls1_enc (ssl/t1_enc.c).
+     [Bodo Moeller]
+
+  *) Fix OAEP check.
+     [Ulf M<>ller, Bodo M<>ller]
+
+  *) The countermeasure against Bleichbacher's attack on PKCS #1 v1.5
+     RSA encryption was accidentally removed in s3_srvr.c in OpenSSL 0.9.5
+     when fixing the server behaviour for backwards-compatible 'client
+     hello' messages.  (Note that the attack is impractical against
+     SSL 3.0 and TLS 1.0 anyway because length and version checking
+     means that the probability of guessing a valid ciphertext is
+     around 2^-40; see section 5 in Bleichenbacher's CRYPTO '98
+     paper.)
+
+     Before 0.9.5, the countermeasure (hide the error by generating a
+     random 'decryption result') did not work properly because
+     ERR_clear_error() was missing, meaning that SSL_get_error() would
+     detect the supposedly ignored error.
+
+     Both problems are now fixed.
+     [Bodo Moeller]
+
+  *) In crypto/bio/bf_buff.c, increase DEFAULT_BUFFER_SIZE to 4096
+     (previously it was 1024).
+     [Bodo Moeller]
+
+  *) Fix for compatibility mode trust settings: ignore trust settings
+     unless some valid trust or reject settings are present.
+     [Steve Henson]
+
+  *) Fix for blowfish EVP: its a variable length cipher.
+     [Steve Henson]
+
+  *) Fix various bugs related to DSA S/MIME verification. Handle missing
+     parameters in DSA public key structures and return an error in the
+     DSA routines if parameters are absent.
+     [Steve Henson]
+
+  *) In versions up to 0.9.6, RAND_file_name() resorted to file ".rnd"
+     in the current directory if neither $RANDFILE nor $HOME was set.
+     RAND_file_name() in 0.9.6a returned NULL in this case.  This has
+     caused some confusion to Windows users who haven't defined $HOME.
+     Thus RAND_file_name() is changed again: e_os.h can define a
+     DEFAULT_HOME, which will be used if $HOME is not set.
+     For Windows, we use "C:"; on other platforms, we still require
+     environment variables.
+
+  *) Move 'if (!initialized) RAND_poll()' into regions protected by
+     CRYPTO_LOCK_RAND.  This is not strictly necessary, but avoids
+     having multiple threads call RAND_poll() concurrently.
+     [Bodo Moeller]
+
+  *) In crypto/rand/md_rand.c, replace 'add_do_not_lock' flag by a
+     combination of a flag and a thread ID variable.
+     Otherwise while one thread is in ssleay_rand_bytes (which sets the
+     flag), *other* threads can enter ssleay_add_bytes without obeying
+     the CRYPTO_LOCK_RAND lock (and may even illegally release the lock
+     that they do not hold after the first thread unsets add_do_not_lock).
+     [Bodo Moeller]
+
+  *) Change bctest again: '-x' expressions are not available in all
+     versions of 'test'.
+     [Bodo Moeller]
+
+ Changes between 0.9.6 and 0.9.6a  [5 Apr 2001]
+
+  *) Fix a couple of memory leaks in PKCS7_dataDecode()
+     [Steve Henson, reported by Heyun Zheng <hzheng@atdsprint.com>]
+
+  *) Change Configure and Makefiles to provide EXE_EXT, which will contain
+     the default extension for executables, if any.  Also, make the perl
+     scripts that use symlink() to test if it really exists and use "cp"
+     if it doesn't.  All this made OpenSSL compilable and installable in
+     CygWin.
+     [Richard Levitte]
+
+  *) Fix for asn1_GetSequence() for indefinite length constructed data.
+     If SEQUENCE is length is indefinite just set c->slen to the total
+     amount of data available.
+     [Steve Henson, reported by shige@FreeBSD.org]
+     [This change does not apply to 0.9.7.]
+
+  *) Change bctest to avoid here-documents inside command substitution
+     (workaround for FreeBSD /bin/sh bug).
+     For compatibility with Ultrix, avoid shell functions (introduced
+     in the bctest version that searches along $PATH).
+     [Bodo Moeller]
+
+  *) Rename 'des_encrypt' to 'des_encrypt1'.  This avoids the clashes
+     with des_encrypt() defined on some operating systems, like Solaris
+     and UnixWare.
+     [Richard Levitte]
+
+  *) Check the result of RSA-CRT (see D. Boneh, R. DeMillo, R. Lipton:
+     On the Importance of Eliminating Errors in Cryptographic
+     Computations, J. Cryptology 14 (2001) 2, 101-119,
+     http://theory.stanford.edu/~dabo/papers/faults.ps.gz).
+     [Ulf Moeller]
+  
+  *) MIPS assembler BIGNUM division bug fix. 
+     [Andy Polyakov]
+
+  *) Disabled incorrect Alpha assembler code.
+     [Richard Levitte]
+
+  *) Fix PKCS#7 decode routines so they correctly update the length
+     after reading an EOC for the EXPLICIT tag.
+     [Steve Henson]
+     [This change does not apply to 0.9.7.]
+
+  *) Fix bug in PKCS#12 key generation routines. This was triggered
+     if a 3DES key was generated with a 0 initial byte. Include
+     PKCS12_BROKEN_KEYGEN compilation option to retain the old
+     (but broken) behaviour.
+     [Steve Henson]
+
+  *) Enhance bctest to search for a working bc along $PATH and print
+     it when found.
+     [Tim Rice <tim@multitalents.net> via Richard Levitte]
+
+  *) Fix memory leaks in err.c: free err_data string if necessary;
+     don't write to the wrong index in ERR_set_error_data.
+     [Bodo Moeller]
+
+  *) Implement ssl23_peek (analogous to ssl23_read), which previously
+     did not exist.
+     [Bodo Moeller]
+
+  *) Replace rdtsc with _emit statements for VC++ version 5.
+     [Jeremy Cooper <jeremy@baymoo.org>]
+
+  *) Make it possible to reuse SSLv2 sessions.
+     [Richard Levitte]
+
+  *) In copy_email() check for >= 0 as a return value for
+     X509_NAME_get_index_by_NID() since 0 is a valid index.
+     [Steve Henson reported by Massimiliano Pala <madwolf@opensca.org>]
+
+  *) Avoid coredump with unsupported or invalid public keys by checking if
+     X509_get_pubkey() fails in PKCS7_verify(). Fix memory leak when
+     PKCS7_verify() fails with non detached data.
+     [Steve Henson]
+
+  *) Don't use getenv in library functions when run as setuid/setgid.
+     New function OPENSSL_issetugid().
+     [Ulf Moeller]
+
+  *) Avoid false positives in memory leak detection code (crypto/mem_dbg.c)
+     due to incorrect handling of multi-threading:
+
+     1. Fix timing glitch in the MemCheck_off() portion of CRYPTO_mem_ctrl().
+
+     2. Fix logical glitch in is_MemCheck_on() aka CRYPTO_is_mem_check_on().
+
+     3. Count how many times MemCheck_off() has been called so that
+        nested use can be treated correctly.  This also avoids 
+        inband-signalling in the previous code (which relied on the
+        assumption that thread ID 0 is impossible).
+     [Bodo Moeller]
+
+  *) Add "-rand" option also to s_client and s_server.
+     [Lutz Jaenicke]
+
+  *) Fix CPU detection on Irix 6.x.
+     [Kurt Hockenbury <khockenb@stevens-tech.edu> and
+      "Bruce W. Forsberg" <bruce.forsberg@baesystems.com>]
+
+  *) Fix X509_NAME bug which produced incorrect encoding if X509_NAME
+     was empty.
+     [Steve Henson]
+     [This change does not apply to 0.9.7.]
+
+  *) Use the cached encoding of an X509_NAME structure rather than
+     copying it. This is apparently the reason for the libsafe "errors"
+     but the code is actually correct.
+     [Steve Henson]
+
+  *) Add new function BN_rand_range(), and fix DSA_sign_setup() to prevent
+     Bleichenbacher's DSA attack.
+     Extend BN_[pseudo_]rand: As before, top=1 forces the highest two bits
+     to be set and top=0 forces the highest bit to be set; top=-1 is new
+     and leaves the highest bit random.
+     [Ulf Moeller, Bodo Moeller]
+
+  *) In the NCONF_...-based implementations for CONF_... queries
+     (crypto/conf/conf_lib.c), if the input LHASH is NULL, avoid using
+     a temporary CONF structure with the data component set to NULL
+     (which gives segmentation faults in lh_retrieve).
+     Instead, use NULL for the CONF pointer in CONF_get_string and
+     CONF_get_number (which may use environment variables) and directly
+     return NULL from CONF_get_section.
+     [Bodo Moeller]
+
+  *) Fix potential buffer overrun for EBCDIC.
+     [Ulf Moeller]
+
+  *) Tolerate nonRepudiation as being valid for S/MIME signing and certSign
+     keyUsage if basicConstraints absent for a CA.
+     [Steve Henson]
+
+  *) Make SMIME_write_PKCS7() write mail header values with a format that
+     is more generally accepted (no spaces before the semicolon), since
+     some programs can't parse those values properly otherwise.  Also make
+     sure BIO's that break lines after each write do not create invalid
+     headers.
+     [Richard Levitte]
+
+  *) Make the CRL encoding routines work with empty SEQUENCE OF. The
+     macros previously used would not encode an empty SEQUENCE OF
+     and break the signature.
+     [Steve Henson]
+     [This change does not apply to 0.9.7.]
+
+  *) Zero the premaster secret after deriving the master secret in
+     DH ciphersuites.
+     [Steve Henson]
+
+  *) Add some EVP_add_digest_alias registrations (as found in
+     OpenSSL_add_all_digests()) to SSL_library_init()
+     aka OpenSSL_add_ssl_algorithms().  This provides improved
+     compatibility with peers using X.509 certificates
+     with unconventional AlgorithmIdentifier OIDs.
+     [Bodo Moeller]
+
+  *) Fix for Irix with NO_ASM.
+     ["Bruce W. Forsberg" <bruce.forsberg@baesystems.com>]
+
+  *) ./config script fixes.
+     [Ulf Moeller, Richard Levitte]
+
+  *) Fix 'openssl passwd -1'.
+     [Bodo Moeller]
+
+  *) Change PKCS12_key_gen_asc() so it can cope with non null
+     terminated strings whose length is passed in the passlen
+     parameter, for example from PEM callbacks. This was done
+     by adding an extra length parameter to asc2uni().
+     [Steve Henson, reported by <oddissey@samsung.co.kr>]
+
+  *) Fix C code generated by 'openssl dsaparam -C': If a BN_bin2bn
+     call failed, free the DSA structure.
+     [Bodo Moeller]
+
+  *) Fix to uni2asc() to cope with zero length Unicode strings.
+     These are present in some PKCS#12 files.
+     [Steve Henson]
+
+  *) Increase s2->wbuf allocation by one byte in ssl2_new (ssl/s2_lib.c).
+     Otherwise do_ssl_write (ssl/s2_pkt.c) will write beyond buffer limits
+     when writing a 32767 byte record.
+     [Bodo Moeller; problem reported by Eric Day <eday@concentric.net>]
+
+  *) In RSA_eay_public_{en,ed}crypt and RSA_eay_mod_exp (rsa_eay.c),
+     obtain lock CRYPTO_LOCK_RSA before setting rsa->_method_mod_{n,p,q}.
+
+     (RSA objects have a reference count access to which is protected
+     by CRYPTO_LOCK_RSA [see rsa_lib.c, s3_srvr.c, ssl_cert.c, ssl_rsa.c],
+     so they are meant to be shared between threads.)
+     [Bodo Moeller, Geoff Thorpe; original patch submitted by
+     "Reddie, Steven" <Steven.Reddie@ca.com>]
+
+  *) Fix a deadlock in CRYPTO_mem_leaks().
+     [Bodo Moeller]
+
+  *) Use better test patterns in bntest.
+     [Ulf M<>ller]
+
+  *) rand_win.c fix for Borland C.
+     [Ulf M<>ller]
+ 
+  *) BN_rshift bugfix for n == 0.
+     [Bodo Moeller]
+
+  *) Add a 'bctest' script that checks for some known 'bc' bugs
+     so that 'make test' does not abort just because 'bc' is broken.
+     [Bodo Moeller]
+
+  *) Store verify_result within SSL_SESSION also for client side to
+     avoid potential security hole. (Re-used sessions on the client side
+     always resulted in verify_result==X509_V_OK, not using the original
+     result of the server certificate verification.)
+     [Lutz Jaenicke]
+
+  *) Fix ssl3_pending: If the record in s->s3->rrec is not of type
+     SSL3_RT_APPLICATION_DATA, return 0.
+     Similarly, change ssl2_pending to return 0 if SSL_in_init(s) is true.
+     [Bodo Moeller]
+
+  *) Fix SSL_peek:
+     Both ssl2_peek and ssl3_peek, which were totally broken in earlier
+     releases, have been re-implemented by renaming the previous
+     implementations of ssl2_read and ssl3_read to ssl2_read_internal
+     and ssl3_read_internal, respectively, and adding 'peek' parameters
+     to them.  The new ssl[23]_{read,peek} functions are calls to
+     ssl[23]_read_internal with the 'peek' flag set appropriately.
+     A 'peek' parameter has also been added to ssl3_read_bytes, which
+     does the actual work for ssl3_read_internal.
+     [Bodo Moeller]
+
+  *) Initialise "ex_data" member of RSA/DSA/DH structures prior to calling
+     the method-specific "init()" handler. Also clean up ex_data after
+     calling the method-specific "finish()" handler. Previously, this was
+     happening the other way round.
+     [Geoff Thorpe]
+
+  *) Increase BN_CTX_NUM (the number of BIGNUMs in a BN_CTX) to 16.
+     The previous value, 12, was not always sufficient for BN_mod_exp().
+     [Bodo Moeller]
+
+  *) Make sure that shared libraries get the internal name engine with
+     the full version number and not just 0.  This should mark the
+     shared libraries as not backward compatible.  Of course, this should
+     be changed again when we can guarantee backward binary compatibility.
+     [Richard Levitte]
+
+  *) Fix typo in get_cert_by_subject() in by_dir.c
+     [Jean-Marc Desperrier <jean-marc.desperrier@certplus.com>]
+
+  *) Rework the system to generate shared libraries:
+
+     - Make note of the expected extension for the shared libraries and
+       if there is a need for symbolic links from for example libcrypto.so.0
+       to libcrypto.so.0.9.7.  There is extended info in Configure for
+       that.
+
+     - Make as few rebuilds of the shared libraries as possible.
+
+     - Still avoid linking the OpenSSL programs with the shared libraries.
+
+     - When installing, install the shared libraries separately from the
+       static ones.
+     [Richard Levitte]
+
+  *) Fix SSL_CTX_set_read_ahead macro to actually use its argument.
+
+     Copy SSL_CTX's read_ahead flag to SSL object directly in SSL_new
+     and not in SSL_clear because the latter is also used by the
+     accept/connect functions; previously, the settings made by
+     SSL_set_read_ahead would be lost during the handshake.
+     [Bodo Moeller; problems reported by Anders Gertz <gertz@epact.se>]     
+
+  *) Correct util/mkdef.pl to be selective about disabled algorithms.
+     Previously, it would create entries for disableed algorithms no
+     matter what.
+     [Richard Levitte]
+
+  *) Added several new manual pages for SSL_* function.
+     [Lutz Jaenicke]
+
  Changes between 0.9.5a and 0.9.6  [24 Sep 2000]
 
   *) In ssl23_get_client_hello, generate an error message when faced
@@ -351,7 +1254,7 @@
      default is static libraries only, and the OpenSSL programs
      are always statically linked for now, but there are
      preparations for dynamic linking in place.
-     This has been tested on Linux and True64.
+     This has been tested on Linux and Tru64.
      [Richard Levitte]
 
   *) Randomness polling function for Win9x, as described in:
@@ -2078,7 +2981,7 @@
                                      copied!)
      [Bodo Moeller]
 
-  *) Bugfix: SSL_set_mode ignored its parameter, only SSL_CTX_set_mode
+  *) Bugfix: SSL_set_options ignored its parameter, only SSL_CTX_set_options
      worked.
 
   *) Fix problems with no-hmac etc.

Configure

@@ -10,7 +10,7 @@ use strict;
 
 # see INSTALL for instructions.
 
-my $usage="Usage: Configure [no-<cipher> ...] [-Dxxx] [-lxxx] [-Lxxx] [-fxxx] [-Kxxx] [rsaref] [no-threads] [no-asm] [no-dso] [386] [--prefix=DIR] [--openssldir=OPENSSLDIR] os/compiler[:flags]\n";
+my $usage="Usage: Configure [no-<cipher> ...] [-Dxxx] [-lxxx] [-Lxxx] [-fxxx] [-Kxxx] [rsaref] [no-threads] [no-asm] [no-dso] [386] [--prefix=DIR] [--openssldir=OPENSSLDIR] [--test-sanity] os/compiler[:flags]\n";
 
 # Options:
 #
@@ -23,6 +23,9 @@ my $usage="Usage: Configure [no-<cipher> ...] [-Dxxx] [-lxxx] [-Lxxx] [-fxxx] [-
 #               default).  This needn't be set in advance, you can
 #               just as well use "make INSTALL_PREFIX=/whatever install".
 #
+# --test-sanity Make a number of sanity checks on the data in this file.
+#               This is a debugging tool for OpenSSL developers.
+#
 # rsaref        use RSAref
 # [no-]threads  [don't] try to create a library that is suitable for
 #               multithreaded applications (default is "threads" if we
@@ -89,10 +92,15 @@ my $x86_elf_asm="asm/bn86-elf.o asm/co86-elf.o:asm/dx86-elf.o asm/yx86-elf.o:asm
 my $x86_out_asm="asm/bn86-out.o asm/co86-out.o:asm/dx86-out.o asm/yx86-out.o:asm/bx86-out.o:asm/mx86-out.o:asm/sx86-out.o:asm/cx86-out.o:asm/rx86-out.o:asm/rm86-out.o:asm/r586-out.o";
 my $x86_bsdi_asm="asm/bn86bsdi.o asm/co86bsdi.o:asm/dx86bsdi.o asm/yx86bsdi.o:asm/bx86bsdi.o:asm/mx86bsdi.o:asm/sx86bsdi.o:asm/cx86bsdi.o:asm/rx86bsdi.o:asm/rm86bsdi.o:asm/r586bsdi.o";
 
+my $mips3_irix_asm="asm/mips3.o::::::::";
+# There seems to be boundary faults in asm/alpha.s.
+#my $alpha_asm="asm/alpha.o::::::::";
+my $alpha_asm="::::::::";
+
 # -DB_ENDIAN slows things down on a sparc for md5, but helps sha1.
 # So the md5_locl.h file has an undef B_ENDIAN if sun is defined
 
-#config-string	$cc : $cflags : $unistd : $thread_cflag : $lflags : $bn_ops : $bn_obj : $des_obj : $bf_obj : $md5_obj : $sha1_obj : $cast_obj : $rc4_obj : $rmd160_obj : $rc5_obj : $dso_scheme : $shared_target : $shared_cflag
+#config-string	$cc : $cflags : $unistd : $thread_cflag : $lflags : $bn_ops : $bn_obj : $des_obj : $bf_obj : $md5_obj : $sha1_obj : $cast_obj : $rc4_obj : $rmd160_obj : $rc5_obj : $dso_scheme : $shared_target : $shared_cflag : $shared_ldflag : $shared_extension : $ranlib
 
 my %table=(
 # File 'TABLE' (created by 'make TABLE') contains the data from this list,
@@ -111,10 +119,10 @@ my %table=(
 "debug-ben-debug",	"gcc:-DBN_DEBUG -DREF_CHECK -DCONF_DEBUG -DBN_CTX_DEBUG -DCRYPTO_MDEBUG -DPEDANTIC -DDEBUG_SAFESTACK -g3 -O2 -pedantic -Wall -Wshadow -Werror -pipe::(unknown):::::",
 "debug-ben-strict",	"gcc:-DBN_DEBUG -DREF_CHECK -DCONF_DEBUG -DBN_CTX_DEBUG -DCRYPTO_MDEBUG -DCONST_STRICT -O2 -Wall -Wshadow -Werror -Wpointer-arith -Wcast-qual -Wwrite-strings -pipe::(unknown):::::",
 "debug-rse","cc:-DTERMIOS -DL_ENDIAN -pipe -O -g -ggdb3 -Wall::(unknown)::BN_LLONG ${x86_gcc_des} ${x86_gcc_opts}:${x86_elf_asm}",
-"debug-bodo",	"gcc:-DL_ENDIAN -DBN_DEBUG -DREF_CHECK -DCONF_DEBUG -DBN_CTX_DEBUG -DCRYPTO_MDEBUG_ALL -DBIO_PAIR_DEBUG -g -m486 -pedantic -Wshadow -Wall::-D_REENTRANT::BN_LLONG ${x86_gcc_des} ${x86_gcc_opts}:${x86_elf_asm}",
-"debug-ulf",	"gcc:-DL_ENDIAN -DREF_CHECK -DCONF_DEBUG -DBN_DEBUG -DBN_CTX_DEBUG -DCRYPTO_MDEBUG_ALL -g -O2 -m486 -Wall -Werror -Wshadow -pipe::-D_REENTRANT::${x86_gcc_des} ${x86_gcc_opts}:${x86_elf_asm}",
+"debug-bodo",	"gcc:-DL_ENDIAN -DBN_DEBUG -DREF_CHECK -DCONF_DEBUG -DBN_CTX_DEBUG -DCRYPTO_MDEBUG_ALL -DPEDANTIC -DBIO_PAIR_DEBUG -g -m486 -pedantic -Wshadow -Wall::-D_REENTRANT::BN_LLONG ${x86_gcc_des} ${x86_gcc_opts}:${x86_elf_asm}",
+"debug-ulf",	"gcc:-DL_ENDIAN -DREF_CHECK -DCONF_DEBUG -DBN_DEBUG -DBN_CTX_DEBUG -DCRYPTO_MDEBUG_ALL -DPEDANTIC -g -O2 -m486 -Wall -Werror -Wshadow -pipe::-D_REENTRANT::${x86_gcc_des} ${x86_gcc_opts}:${x86_elf_asm}",
 "debug-steve",	"gcc:-DL_ENDIAN -DREF_CHECK -DCONF_DEBUG -DBN_CTX_DEBUG -DDEBUG_SAFESTACK -DCRYPTO_MDEBUG_ALL -DPEDANTIC -g -O2 -m486 -pedantic -Wall -Werror -Wshadow -pipe::-D_REENTRANT::${x86_gcc_des} ${x86_gcc_opts}:${x86_elf_asm}",
-"debug-levitte-linux-elf","gcc:-DUSE_ALLOCATING_PRINT -DRL_DEBUG -DREF_CHECK -DCONF_DEBUG -DBN_CTX_DEBUG -DCRYPTO_MDEBUG -DNO_ASM -DL_ENDIAN -DTERMIO -D_POSIX_SOURCE -ggdb -g3 -m486 -pedantic -ansi -Wall -Wshadow -Wid-clash-31 -pipe::-D_REENTRANT:-ldl:::::::::::dlfcn",
+"debug-levitte-linux-elf","gcc:-DUSE_ALLOCATING_PRINT -DRL_DEBUG -DREF_CHECK -DCONF_DEBUG -DBN_CTX_DEBUG -DCRYPTO_MDEBUG -DPEDANTIC -DNO_ASM -DL_ENDIAN -DTERMIO -D_POSIX_SOURCE -ggdb -g3 -m486 -pedantic -ansi -Wall -Wshadow -Wstrict-prototypes -Wmissing-prototypes -pipe::-D_REENTRANT:-ldl:::::::::::dlfcn:linux-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
 "dist",		"cc:-O::(unknown):::::",
 
 # Basic configs that should work on any (32 and less bit) box
@@ -127,41 +135,45 @@ my %table=(
 # surrounds it with #APP #NO_APP comment pair which (at least Solaris
 # 7_x86) /usr/ccs/bin/as fails to assemble with "Illegal mnemonic"
 # error message.
-"solaris-x86-gcc","gcc:-O3 -fomit-frame-pointer -m486 -Wall -DL_ENDIAN -DNO_INLINE_ASM::-D_REENTRANT:-lsocket -lnsl -ldl:BN_LLONG ${x86_gcc_des} ${x86_gcc_opts}:${x86_sol_asm}:dlfcn:solaris-shared:-fPIC",
+"solaris-x86-gcc","gcc:-O3 -fomit-frame-pointer -m486 -Wall -DL_ENDIAN -DNO_INLINE_ASM::-D_REENTRANT:-lsocket -lnsl -ldl:BN_LLONG ${x86_gcc_des} ${x86_gcc_opts}:${x86_sol_asm}:dlfcn:solaris-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
+
+#### Solaris x86 with Sun C setups
+"solaris-x86-cc","cc:-fast -O -Xa::-D_REENTRANT:-lsocket -lnsl -ldl:BN_LLONG RC4_CHAR RC4_CHUNK DES_PTR DES_UNROLL BF_PTR::::::::::dlfcn:solaris-shared:-KPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
 
 #### SPARC Solaris with GNU C setups
-"solaris-sparcv7-gcc","gcc:-O3 -fomit-frame-pointer -Wall -DB_ENDIAN -DBN_DIV2W::-D_REENTRANT:-lsocket -lnsl -ldl:BN_LLONG RC4_CHAR RC4_CHUNK DES_UNROLL BF_PTR::::::::::dlfcn:solaris-shared:-fPIC",
-"solaris-sparcv8-gcc","gcc:-mv8 -O3 -fomit-frame-pointer -Wall -DB_ENDIAN -DBN_DIV2W::-D_REENTRANT:-lsocket -lnsl -ldl:BN_LLONG RC4_CHAR RC4_CHUNK DES_UNROLL BF_PTR:asm/sparcv8.o:::::::::dlfcn:solaris-shared:-fPIC",
-"solaris-sparcv9-gcc","gcc:-mcpu=ultrasparc -O3 -fomit-frame-pointer -Wall -DB_ENDIAN -DBN_DIV2W -DULTRASPARC::-D_REENTRANT:-lsocket -lnsl -ldl:BN_LLONG RC4_CHAR RC4_CHUNK DES_UNROLL BF_PTR:asm/sparcv8plus.o:::asm/md5-sparcv8plus.o::::::dlfcn:solaris-shared:-fPIC",
+"solaris-sparcv7-gcc","gcc:-O3 -fomit-frame-pointer -Wall -DB_ENDIAN -DBN_DIV2W::-D_REENTRANT:-lsocket -lnsl -ldl:BN_LLONG RC4_CHAR RC4_CHUNK DES_UNROLL BF_PTR::::::::::dlfcn:solaris-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
+"solaris-sparcv8-gcc","gcc:-mv8 -O3 -fomit-frame-pointer -Wall -DB_ENDIAN -DBN_DIV2W::-D_REENTRANT:-lsocket -lnsl -ldl:BN_LLONG RC4_CHAR RC4_CHUNK DES_UNROLL BF_PTR:asm/sparcv8.o:::::::::dlfcn:solaris-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
+"solaris-sparcv9-gcc","gcc:-mcpu=ultrasparc -O3 -fomit-frame-pointer -Wall -DB_ENDIAN -DBN_DIV2W -DULTRASPARC::-D_REENTRANT:-lsocket -lnsl -ldl:BN_LLONG RC4_CHAR RC4_CHUNK DES_UNROLL BF_PTR:asm/sparcv8plus.o:::asm/md5-sparcv8plus.o::::::dlfcn:solaris-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
+"solaris64-sparcv9-gcc31","gcc:-mcpu=ultrasparc -m64 -O3 -fomit-frame-pointer -Wall -DB_ENDIAN -DULTRASPARC::-D_REENTRANT:-lsocket -lnsl -ldl:SIXTY_FOUR_BIT_LONG RC4_CHAR RC4_CHUNK DES_INT DES_PTR DES_RISC1 DES_UNROLL BF_PTR::::asm/md5-sparcv9.o::::::dlfcn:solaris-shared:-fPIC:-m64:.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
 # gcc pre-2.8 doesn't understand -mcpu=ultrasparc, so fall down to -mv8
 # but keep the assembler modules.
-"solaris-sparcv9-gcc27","gcc:-mv8 -O3 -fomit-frame-pointer -Wall -DB_ENDIAN -DBN_DIV2W -DULTRASPARC::-D_REENTRANT:-lsocket -lnsl -ldl:BN_LLONG RC4_CHAR RC4_CHUNK DES_UNROLL BF_PTR:asm/sparcv8plus-gcc27.o:::asm/md5-sparcv8plus-gcc27.o::::::dlfcn:solaris-shared:-fPIC",
+"solaris-sparcv9-gcc27","gcc:-mv8 -O3 -fomit-frame-pointer -Wall -DB_ENDIAN -DBN_DIV2W -DULTRASPARC::-D_REENTRANT:-lsocket -lnsl -ldl:BN_LLONG RC4_CHAR RC4_CHUNK DES_UNROLL BF_PTR:asm/sparcv8plus-gcc27.o:::asm/md5-sparcv8plus-gcc27.o::::::dlfcn:solaris-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
 ####
-"debug-solaris-sparcv8-gcc","gcc:-DBN_DEBUG -DREF_CHECK -DCONF_DEBUG -DBN_CTX_DEBUG -DCRYPTO_MDEBUG_ALL -O -g -mv8 -Wall -DB_ENDIAN::-D_REENTRANT:-lsocket -lnsl -ldl:BN_LLONG RC4_CHAR RC4_CHUNK DES_UNROLL BF_PTR:asm/sparcv8.o:::::::::dlfcn:solaris-shared:-fPIC",
-"debug-solaris-sparcv9-gcc","gcc:-DBN_DEBUG -DREF_CHECK -DCONF_DEBUG -DBN_CTX_DEBUG -DCRYPTO_MDEBUG_ALL -O -g -mcpu=ultrasparc -Wall -DB_ENDIAN::-D_REENTRANT:-lsocket -lnsl -ldl:BN_LLONG RC4_CHAR RC4_CHUNK DES_UNROLL BF_PTR:asm/sparcv8plus.o:::::::::dlfcn:solaris-shared:-fPIC",
+"debug-solaris-sparcv8-gcc","gcc:-DBN_DEBUG -DREF_CHECK -DCONF_DEBUG -DBN_CTX_DEBUG -DCRYPTO_MDEBUG_ALL -O -g -mv8 -Wall -DB_ENDIAN::-D_REENTRANT:-lsocket -lnsl -ldl:BN_LLONG RC4_CHAR RC4_CHUNK DES_UNROLL BF_PTR:asm/sparcv8.o:::::::::dlfcn:solaris-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
+"debug-solaris-sparcv9-gcc","gcc:-DBN_DEBUG -DREF_CHECK -DCONF_DEBUG -DBN_CTX_DEBUG -DCRYPTO_MDEBUG_ALL -O -g -mcpu=ultrasparc -Wall -DB_ENDIAN::-D_REENTRANT:-lsocket -lnsl -ldl:BN_LLONG RC4_CHAR RC4_CHUNK DES_UNROLL BF_PTR:asm/sparcv8plus.o:::::::::dlfcn:solaris-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
 
 #### SPARC Solaris with Sun C setups
 # DO NOT use /xO[34] on sparc with SC3.0.  It is broken, and will not pass the tests
-"solaris-sparc-sc3","cc:-fast -O -Xa -DB_ENDIAN::-D_REENTRANT:-lsocket -lnsl -ldl:BN_LLONG RC4_CHAR RC4_CHUNK DES_PTR DES_UNROLL BF_PTR::::::::::dlfcn:solaris-shared:-KPIC",
+"solaris-sparc-sc3","cc:-fast -O -Xa -DB_ENDIAN::-D_REENTRANT:-lsocket -lnsl -ldl:BN_LLONG RC4_CHAR RC4_CHUNK DES_PTR DES_UNROLL BF_PTR::::::::::dlfcn:solaris-shared:-KPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
 # SC4.0 doesn't pass 'make test', upgrade to SC5.0 or SC4.2.
 # SC4.2 is ok, better than gcc even on bn as long as you tell it -xarch=v8
 # SC5.0 note: Compiler common patch 107357-01 or later is required!
-"solaris-sparcv7-cc","cc:-xO5 -xstrconst -xdepend -Xa -DB_ENDIAN -DBN_DIV2W::-D_REENTRANT:-lsocket -lnsl -ldl:BN_LLONG RC4_CHAR RC4_CHUNK DES_PTR DES_RISC1 DES_UNROLL BF_PTR::::::::::dlfcn:solaris-shared:-KPIC",
-"solaris-sparcv8-cc","cc:-xarch=v8 -xO5 -xstrconst -xdepend -Xa -DB_ENDIAN -DBN_DIV2W::-D_REENTRANT:-lsocket -lnsl -ldl:BN_LLONG RC4_CHAR RC4_CHUNK DES_PTR DES_RISC1 DES_UNROLL BF_PTR:asm/sparcv8.o:::::::::dlfcn:solaris-shared:-KPIC",
-"solaris-sparcv9-cc","cc:-xtarget=ultra -xarch=v8plus -xO5 -xstrconst -xdepend -Xa -DB_ENDIAN -DBN_DIV2W -DULTRASPARC::-D_REENTRANT:-lsocket -lnsl -ldl:BN_LLONG RC4_CHAR RC4_CHUNK_LL DES_PTR DES_RISC1 DES_UNROLL BF_PTR:asm/sparcv8plus.o:::asm/md5-sparcv8plus.o::::::dlfcn:solaris-shared:-KPIC",
-"solaris64-sparcv9-cc","cc:-xtarget=ultra -xarch=v9 -xO5 -xstrconst -xdepend -Xa -DB_ENDIAN -DULTRASPARC::-D_REENTRANT:-lsocket -lnsl -ldl:SIXTY_FOUR_BIT_LONG RC4_CHAR RC4_CHUNK DES_INT DES_PTR DES_RISC1 DES_UNROLL BF_PTR::::asm/md5-sparcv9.o::::::dlfcn:solaris-shared:-KPIC",
+"solaris-sparcv7-cc","cc:-xO5 -xstrconst -xdepend -Xa -DB_ENDIAN -DBN_DIV2W::-D_REENTRANT:-lsocket -lnsl -ldl:BN_LLONG RC4_CHAR RC4_CHUNK DES_PTR DES_RISC1 DES_UNROLL BF_PTR::::::::::dlfcn:solaris-shared:-KPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
+"solaris-sparcv8-cc","cc:-xarch=v8 -xO5 -xstrconst -xdepend -Xa -DB_ENDIAN -DBN_DIV2W::-D_REENTRANT:-lsocket -lnsl -ldl:BN_LLONG RC4_CHAR RC4_CHUNK DES_PTR DES_RISC1 DES_UNROLL BF_PTR:asm/sparcv8.o:::::::::dlfcn:solaris-shared:-KPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
+"solaris-sparcv9-cc","cc:-xtarget=ultra -xarch=v8plus -xO5 -xstrconst -xdepend -Xa -DB_ENDIAN -DBN_DIV2W -DULTRASPARC::-D_REENTRANT:-lsocket -lnsl -ldl:BN_LLONG RC4_CHAR RC4_CHUNK_LL DES_PTR DES_RISC1 DES_UNROLL BF_PTR:asm/sparcv8plus.o:::asm/md5-sparcv8plus.o::::::dlfcn:solaris-shared:-KPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
+"solaris64-sparcv9-cc","cc:-xtarget=ultra -xarch=v9 -xO5 -xstrconst -xdepend -Xa -DB_ENDIAN -DULTRASPARC::-D_REENTRANT:-lsocket -lnsl -ldl:SIXTY_FOUR_BIT_LONG RC4_CHAR RC4_CHUNK DES_INT DES_PTR DES_RISC1 DES_UNROLL BF_PTR::::asm/md5-sparcv9.o::::::dlfcn:solaris-shared:-KPIC:-xarch=v9:.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR):/usr/ccs/bin/ar rs",
 ####
-"debug-solaris-sparcv8-cc","cc:-DBN_DEBUG -DREF_CHECK -DCONF_DEBUG -DBN_CTX_DEBUG -DCRYPTO_MDEBUG_ALL -xarch=v8 -g -O -xstrconst -Xa -DB_ENDIAN -DBN_DIV2W::-D_REENTRANT:-lsocket -lnsl -ldl:BN_LLONG RC4_CHAR RC4_CHUNK DES_PTR DES_RISC1 DES_UNROLL BF_PTR:asm/sparcv8.o:::::::::dlfcn:solaris-shared:-KPIC",
-"debug-solaris-sparcv9-cc","cc:-DBN_DEBUG -DREF_CHECK -DCONF_DEBUG -DBN_CTX_DEBUG -DCRYPTO_MDEBUG_ALL -xtarget=ultra -xarch=v8plus -g -O -xstrconst -Xa -DB_ENDIAN -DBN_DIV2W -DULTRASPARC::-D_REENTRANT:-lsocket -lnsl -ldl:BN_LLONG RC4_CHAR RC4_CHUNK_LL DES_PTR DES_RISC1 DES_UNROLL BF_PTR:asm/sparcv8plus.o:::asm/md5-sparcv8plus.o::::::dlfcn:solaris-shared:-KPIC",
+"debug-solaris-sparcv8-cc","cc:-DBN_DEBUG -DREF_CHECK -DCONF_DEBUG -DBN_CTX_DEBUG -DCRYPTO_MDEBUG_ALL -xarch=v8 -g -O -xstrconst -Xa -DB_ENDIAN -DBN_DIV2W::-D_REENTRANT:-lsocket -lnsl -ldl:BN_LLONG RC4_CHAR RC4_CHUNK DES_PTR DES_RISC1 DES_UNROLL BF_PTR:asm/sparcv8.o:::::::::dlfcn:solaris-shared:-KPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
+"debug-solaris-sparcv9-cc","cc:-DBN_DEBUG -DREF_CHECK -DCONF_DEBUG -DBN_CTX_DEBUG -DCRYPTO_MDEBUG_ALL -xtarget=ultra -xarch=v8plus -g -O -xstrconst -Xa -DB_ENDIAN -DBN_DIV2W -DULTRASPARC::-D_REENTRANT:-lsocket -lnsl -ldl:BN_LLONG RC4_CHAR RC4_CHUNK_LL DES_PTR DES_RISC1 DES_UNROLL BF_PTR:asm/sparcv8plus.o:::asm/md5-sparcv8plus.o::::::dlfcn:solaris-shared:-KPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
 
 #### SPARC Linux setups
 "linux-sparcv7","gcc:-DB_ENDIAN -DTERMIO -O3 -fomit-frame-pointer -Wall::-D_REENTRANT::BN_LLONG RC4_CHAR RC4_CHUNK DES_UNROLL BF_PTR::",
 # Ray Miller <ray.miller@computing-services.oxford.ac.uk> has patiently
 # assisted with debugging of following two configs.
-"linux-sparcv8","gcc:-mv8 -DB_ENDIAN -DTERMIO -O3 -fomit-frame-pointer -Wall -DBN_DIV2W::-D_REENTRANT::BN_LLONG RC4_CHAR RC4_CHUNK DES_UNROLL BF_PTR:asm/sparcv8.o::::",
+"linux-sparcv8","gcc:-mv8 -DB_ENDIAN -DTERMIO -O3 -fomit-frame-pointer -Wall -DBN_DIV2W::-D_REENTRANT:-ldl:BN_LLONG RC4_CHAR RC4_CHUNK DES_UNROLL BF_PTR:asm/sparcv8.o:::::::::dlfcn:linux-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
 # it's a real mess with -mcpu=ultrasparc option under Linux, but
 # -Wa,-Av8plus should do the trick no matter what.
-"linux-sparcv9","gcc:-mcpu=ultrasparc -DB_ENDIAN -DTERMIO -O3 -fomit-frame-pointer -Wall -Wa,-Av8plus -DULTRASPARC -DBN_DIV2W::-D_REENTRANT::BN_LLONG RC4_CHAR RC4_CHUNK DES_UNROLL BF_PTR:asm/sparcv8plus.o:::asm/md5-sparcv8plus.o:",
+"linux-sparcv9","gcc:-mcpu=ultrasparc -DB_ENDIAN -DTERMIO -O3 -fomit-frame-pointer -Wall -Wa,-Av8plus -DULTRASPARC -DBN_DIV2W::-D_REENTRANT:-ldl:BN_LLONG RC4_CHAR RC4_CHUNK DES_UNROLL BF_PTR:asm/sparcv8plus.o:::asm/md5-sparcv8plus.o::::::dlfcn:linux-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
 # !!!Folowing can't be even tested yet!!!
 #    We have to wait till 64-bit glibc for SPARC is operational!!!
 #"linux64-sparcv9","sparc64-linux-gcc:-m64 -mcpu=v9 -DB_ENDIAN -DTERMIO -O3 -fomit-frame-pointer -Wall -DULTRASPARC -DBN_DIV2W::-D_REENTRANT::BN_LLONG RC4_CHAR RC4_CHUNK DES_UNROLL BF_PTR::::asm/md5-sparcv9.o:",
@@ -172,17 +184,17 @@ my %table=(
 
 #### IRIX 5.x configs
 # -mips2 flag is added by ./config when appropriate.
-"irix-gcc","gcc:-O3 -DTERMIOS -DB_ENDIAN::(unknown)::BN_LLONG MD2_CHAR RC4_INDEX RC4_CHAR RC4_CHUNK DES_UNROLL DES_RISC2 DES_PTR BF_PTR:::",
-"irix-cc", "cc:-O2 -use_readonly_const -DTERMIOS -DB_ENDIAN::(unknown)::BN_LLONG RC4_CHAR RC4_CHUNK DES_PTR DES_RISC2 DES_UNROLL BF_PTR:::",
+"irix-gcc","gcc:-O3 -DTERMIOS -DB_ENDIAN::(unknown)::BN_LLONG MD2_CHAR RC4_INDEX RC4_CHAR RC4_CHUNK DES_UNROLL DES_RISC2 DES_PTR BF_PTR::::::::::dlfcn:irix-shared:::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
+"irix-cc", "cc:-O2 -use_readonly_const -DTERMIOS -DB_ENDIAN::(unknown)::BN_LLONG RC4_CHAR RC4_CHUNK DES_PTR DES_RISC2 DES_UNROLL BF_PTR::::::::::dlfcn:irix-shared:::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
 #### IRIX 6.x configs
 # Only N32 and N64 ABIs are supported. If you need O32 ABI build, invoke
 # './Configure irix-[g]cc' manually.
 # -mips4 flag is added by ./config when appropriate.
-"irix-mips3-gcc","gcc:-mabi=n32 -mmips-as -O3 -DTERMIOS -DB_ENDIAN -DBN_DIV3W::-D_SGI_MP_SOURCE::MD2_CHAR RC4_INDEX RC4_CHAR RC4_CHUNK_LL DES_UNROLL DES_RISC2 DES_PTR BF_PTR SIXTY_FOUR_BIT:asm/mips3.o::",
-"irix-mips3-cc", "cc:-n32 -O2 -use_readonly_const -DTERMIOS -DB_ENDIAN -DBN_DIV3W::-D_SGI_MP_SOURCE::DES_PTR RC4_CHAR RC4_CHUNK_LL DES_RISC2 DES_UNROLL BF_PTR SIXTY_FOUR_BIT:asm/mips3.o::",
+"irix-mips3-gcc","gcc:-mabi=n32 -mmips-as -O3 -DTERMIOS -DB_ENDIAN -DBN_DIV3W::-D_SGI_MP_SOURCE::MD2_CHAR RC4_INDEX RC4_CHAR RC4_CHUNK_LL DES_UNROLL DES_RISC2 DES_PTR BF_PTR SIXTY_FOUR_BIT:${mips3_irix_asm}:dlfcn:irix-shared:::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
+"irix-mips3-cc", "cc:-n32 -O2 -use_readonly_const -DTERMIOS -DB_ENDIAN -DBN_DIV3W::-D_SGI_MP_SOURCE::DES_PTR RC4_CHAR RC4_CHUNK_LL DES_RISC2 DES_UNROLL BF_PTR SIXTY_FOUR_BIT:${mips3_irix_asm}:dlfcn:irix-shared:::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
 # N64 ABI builds.
-"irix64-mips4-gcc","gcc:-mabi=64 -mips4 -mmips-as -O3 -DTERMIOS -DB_ENDIAN -DBN_DIV3W::-D_SGI_MP_SOURCE::RC4_CHAR RC4_CHUNK DES_RISC2 DES_UNROLL SIXTY_FOUR_BIT_LONG:asm/mips3.o::",
-"irix64-mips4-cc", "cc:-64 -mips4 -O2 -use_readonly_const -DTERMIOS -DB_ENDIAN -DBN_DIV3W::-D_SGI_MP_SOURCE::RC4_CHAR RC4_CHUNK DES_RISC2 DES_UNROLL SIXTY_FOUR_BIT_LONG:asm/mips3.o::",
+"irix64-mips4-gcc","gcc:-mabi=64 -mips4 -mmips-as -O3 -DTERMIOS -DB_ENDIAN -DBN_DIV3W::-D_SGI_MP_SOURCE::RC4_CHAR RC4_CHUNK DES_RISC2 DES_UNROLL SIXTY_FOUR_BIT_LONG:${mips3_irix_asm}:dlfcn:irix-shared:::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
+"irix64-mips4-cc", "cc:-64 -mips4 -O2 -use_readonly_const -DTERMIOS -DB_ENDIAN -DBN_DIV3W::-D_SGI_MP_SOURCE::RC4_CHAR RC4_CHUNK DES_RISC2 DES_UNROLL SIXTY_FOUR_BIT_LONG:${mips3_irix_asm}:dlfcn:irix-shared:::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
 
 #### Unified HP-UX ANSI C configs.
 # Special notes:
@@ -214,41 +226,45 @@ my %table=(
 #
 #!#"hpux-parisc-cc","cc:-Ae +O3 +ESlit -z -DB_ENDIAN -DBN_DIV2W -DMD32_XARRAY:::-ldld:BN_LLONG DES_PTR DES_UNROLL DES_RISC1::::::::::dl",
 # Since there is mention of this in shlib/hpux10-cc.sh
-"hpux-parisc-cc-o4","cc:-Ae +O4 +ESlit -z -DB_ENDIAN -DBN_DIV2W -DMD32_XARRAY:::-ldld:BN_LLONG DES_PTR DES_UNROLL DES_RISC1::::::::::dl",
-"hpux-parisc-gcc","gcc:-O3 -DB_ENDIAN -DBN_DIV2W:::-ldld:BN_LLONG DES_PTR DES_UNROLL DES_RISC1::::::::::dl",
-"hpux64-parisc-cc","cc:-Ae +DD64 +O3 +ESlit -z -DB_ENDIAN -DMD32_XARRAY::-D_REENTRANT:-ldl:SIXTY_FOUR_BIT_LONG MD2_CHAR RC4_INDEX RC4_CHAR DES_UNROLL DES_RISC1 DES_INT::::::::::dlfcn",
+"hpux-parisc-cc-o4","cc:-Ae +O4 +ESlit -z -DB_ENDIAN -DBN_DIV2W -DMD32_XARRAY:::-ldld:BN_LLONG DES_PTR DES_UNROLL DES_RISC1::::::::::dl:hpux-shared:+Z::.sl.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
+"hpux-parisc-gcc","gcc:-O3 -DB_ENDIAN -DBN_DIV2W:::-ldld:BN_LLONG DES_PTR DES_UNROLL DES_RISC1::::::::::dl:hpux-shared:-fPIC::.sl.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
+"hpux64-parisc-cc","cc:-Ae +DD64 +O3 +ESlit -z -DB_ENDIAN -DMD32_XARRAY::-D_REENTRANT:-ldl:SIXTY_FOUR_BIT_LONG MD2_CHAR RC4_INDEX RC4_CHAR DES_UNROLL DES_RISC1 DES_INT::::::::::dlfcn:hpux64-shared:+Z::.sl.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
+"hpux64-parisc-gcc","gcc:-DB_ENDIAN -DMD32_XARRAY::-D_REENTRANT:-ldl:SIXTY_FOUR_BIT_LONG MD2_CHAR RC4_INDEX RC4_CHAR DES_UNROLL DES_RISC1 DES_INT::::::::::dlfcn:hpux64-shared:-fpic::.sl.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
 
 # More attempts at unified 10.X and 11.X targets for HP C compiler.
 #
 # Chris Ruemmler <ruemmler@cup.hp.com>
 # Kevin Steves <ks@hp.se>
-"hpux-parisc-cc","cc:+O3 +Optrs_strongly_typed +Olibcalls -Ae +ESlit -DB_ENDIAN -DBN_DIV2W -DMD32_XARRAY::-D_REENTRANT:-ldld:MD2_CHAR RC4_INDEX RC4_CHAR DES_UNROLL DES_RISC1 DES_INT::::::::::dl",
-"hpux-parisc2-cc","cc:+DA2.0 +DS2.0 +O3 +Optrs_strongly_typed +Olibcalls -Ae +ESlit -DB_ENDIAN -DMD32_XARRAY::-D_REENTRANT:-ldld:SIXTY_FOUR_BIT MD2_CHAR RC4_INDEX RC4_CHAR DES_UNROLL DES_RISC1 DES_INT:asm/pa-risc2.o:::::::::dl",
-"hpux64-parisc2-cc","cc:+DD64 +O3 +Optrs_strongly_typed +Olibcalls -Ae +ESlit -DB_ENDIAN -DMD32_XARRAY::-D_REENTRANT:-ldl:SIXTY_FOUR_BIT_LONG MD2_CHAR RC4_INDEX RC4_CHAR DES_UNROLL DES_RISC1 DES_INT:asm/pa-risc2W.o:::::::::dlfcn",
-"hpux-parisc1_1-cc","cc:+DA1.1 +DS1.1 +O3 +Optrs_strongly_typed +Olibcalls -Ae +ESlit -DB_ENDIAN -DMD32_XARRAY::-D_REENTRANT:-ldld:MD2_CHAR RC4_INDEX RC4_CHAR DES_UNROLL DES_RISC1 DES_INT::::::::::dl",
+"hpux-parisc-cc","cc:+O3 +Optrs_strongly_typed +Olibcalls -Ae +ESlit -DB_ENDIAN -DBN_DIV2W -DMD32_XARRAY::-D_REENTRANT:-ldld:MD2_CHAR RC4_INDEX RC4_CHAR DES_UNROLL DES_RISC1 DES_INT::::::::::dl:hpux-shared:+Z::.sl.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
+"hpux-parisc2-cc","cc:+DA2.0 +DS2.0 +O3 +Optrs_strongly_typed +Olibcalls -Ae +ESlit -DB_ENDIAN -DMD32_XARRAY::-D_REENTRANT:-ldld:SIXTY_FOUR_BIT MD2_CHAR RC4_INDEX RC4_CHAR DES_UNROLL DES_RISC1 DES_INT:asm/pa-risc2.o:::::::::dl:hpux-shared:+Z::.sl.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
+"hpux64-parisc2-cc","cc:+DD64 +O3 +Optrs_strongly_typed +Olibcalls -Ae +ESlit -DB_ENDIAN -DMD32_XARRAY::-D_REENTRANT:-ldl:SIXTY_FOUR_BIT_LONG MD2_CHAR RC4_INDEX RC4_CHAR DES_UNROLL DES_RISC1 DES_INT:asm/pa-risc2W.o:::::::::dlfcn:hpux64-shared:+Z::.sl.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
+"hpux-parisc1_1-cc","cc:+DA1.1 +DS1.1 +O3 +Optrs_strongly_typed +Olibcalls -Ae +ESlit -DB_ENDIAN -DMD32_XARRAY::-D_REENTRANT:-ldld:MD2_CHAR RC4_INDEX RC4_CHAR DES_UNROLL DES_RISC1 DES_INT::::::::::dl:hpux-shared:+Z::.sl.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
 
 # HPUX 9.X config.
 # Don't use the bundled cc.  It is broken.  Use HP ANSI C if possible, or
 # egcs.  gcc 2.8.1 is also broken.
 
-"hpux-cc",	"cc:-DB_ENDIAN -DBN_DIV2W -DMD32_XARRAY -Ae +ESlit +O3 -z::(unknown):-ldld:BN_LLONG DES_PTR DES_UNROLL DES_RISC1::::::::::dl",
+"hpux-cc",	"cc:-DB_ENDIAN -DBN_DIV2W -DMD32_XARRAY -Ae +ESlit +O3 -z::(unknown):-ldld:BN_LLONG DES_PTR DES_UNROLL DES_RISC1::::::::::dl:hpux-shared:+Z::.sl.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
 # If hpux-cc fails (e.g. during "make test"), try the next one; otherwise,
 # please report your OS and compiler version to the openssl-bugs@openssl.org
 # mailing list.
-"hpux-brokencc",	"cc:-DB_ENDIAN -DBN_DIV2W -Ae +ESlit +O2 -z::(unknown):-ldld:DES_PTR DES_UNROLL DES_RISC1::::::::::dl",
+"hpux-brokencc",	"cc:-DB_ENDIAN -DBN_DIV2W -Ae +ESlit +O2 -z::(unknown):-ldld:DES_PTR DES_UNROLL DES_RISC1::::::::::dl:hpux-shared:+Z::.sl.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
 
-"hpux-gcc",	"gcc:-DB_ENDIAN -DBN_DIV2W -O3::(unknown):-ldld:BN_LLONG DES_PTR DES_UNROLL DES_RISC1::::::::::dl",
+"hpux-gcc",	"gcc:-DB_ENDIAN -DBN_DIV2W -O3::(unknown):-ldld:BN_LLONG DES_PTR DES_UNROLL DES_RISC1::::::::::dl:hpux-shared:-fPIC::.sl.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
 # If hpux-gcc fails, try this one:
-"hpux-brokengcc",	"gcc:-DB_ENDIAN -DBN_DIV2W -O3::(unknown):-ldld:DES_PTR DES_UNROLL DES_RISC1::::::::::dl",
+"hpux-brokengcc",	"gcc:-DB_ENDIAN -DBN_DIV2W -O3::(unknown):-ldld:DES_PTR DES_UNROLL DES_RISC1::::::::::dl:hpux-shared:-fPIC::.sl.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
+
+# HPUX 9.X on Motorola 68k platforms with gcc
+"hpux-m68k-gcc",  "gcc:-DB_ENDIAN -DBN_DIV2W -O3::(unknown)::BN_LLONG DES_PTR DES_UNROLL:::",
 
 # HPUX 10.X config.  Supports threads.
-"hpux10-cc",	"cc:-DB_ENDIAN -DBN_DIV2W -DMD32_XARRAY -Ae +ESlit +O3 -z::-D_REENTRANT:-ldld:BN_LLONG DES_PTR DES_UNROLL DES_RISC1::::::::::dl",
+"hpux10-cc",	"cc:-DB_ENDIAN -DBN_DIV2W -DMD32_XARRAY -Ae +ESlit +O3 -z::-D_REENTRANT:-ldld:BN_LLONG DES_PTR DES_UNROLL DES_RISC1::::::::::dl:hpux-shared:+Z::.sl.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
 # If hpux10-cc fails, try this one (if still fails, try deleting BN_LLONG):
-"hpux10-brokencc",	"cc:-DB_ENDIAN -DBN_DIV2W -Ae +ESlit +O2 -z::-D_REENTRANT:-ldld:BN_LLONG DES_PTR DES_UNROLL DES_RISC1::::::::::dl",
+"hpux10-brokencc",	"cc:-DB_ENDIAN -DBN_DIV2W -Ae +ESlit +O2 -z::-D_REENTRANT:-ldld:BN_LLONG DES_PTR DES_UNROLL DES_RISC1::::::::::dl:hpux-shared:+Z::.sl.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
 
-"hpux10-gcc",	"gcc:-DB_ENDIAN -DBN_DIV2W -O3::-D_REENTRANT:-ldld:BN_LLONG DES_PTR DES_UNROLL DES_RISC1::::::::::dl",
+"hpux10-gcc",	"gcc:-DB_ENDIAN -DBN_DIV2W -O3::-D_REENTRANT:-ldld:BN_LLONG DES_PTR DES_UNROLL DES_RISC1::::::::::dl:hpux-shared:-fPIC::.sl.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
 # If hpux10-gcc fails, try this one:
-"hpux10-brokengcc",	"gcc:-DB_ENDIAN -DBN_DIV2W -O3::-D_REENTRANT:-ldld:DES_PTR DES_UNROLL DES_RISC1::::::::::dl",
+"hpux10-brokengcc",	"gcc:-DB_ENDIAN -DBN_DIV2W -O3::-D_REENTRANT:-ldld:DES_PTR DES_UNROLL DES_RISC1::::::::::dl:hpux-shared:-fPIC::.sl.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
 
 # HPUX 11.X from www.globus.org.
 # Only works on PA-RISC 2.0 cpus, and not optimized.  Why?
@@ -259,13 +275,43 @@ my %table=(
 #### HP MPE/iX http://jazz.external.hp.com/src/openssl/
 "MPE/iX-gcc", "gcc:-D_ENDIAN -DBN_DIV2W -O3 -DMPE -D_POSIX_SOURCE -D_SOCKET_SOURCE -I/SYSLOG/PUB::(unknown):-L/SYSLOG/PUB -lsyslog -lsocket -lcurses:BN_LLONG DES_PTR DES_UNROLL DES_RISC1:::",
 
-# Dec Alpha, OSF/1 - the alpha164-cc is the flags for a 21164A with
-# the new compiler
+#### PARISC Linux setups
+"linux-parisc","gcc:-DB_ENDIAN -DTERMIO -O3 -fomit-frame-pointer -Wall -DBN_DIV2W::-D_REENTRANT::BN_LLONG RC4_CHAR RC4_CHUNK DES_UNROLL BF_PTR::",
+
+# Dec Alpha, OSF/1 - the alpha164-cc is historical, for the conversion
+# from the older DEC C Compiler to the newer compiler.  It's now the
+# same as the preferred entry, alpha-cc.  If you are still using the
+# older compiler (you're at 3.x or earlier, or perhaps very early 4.x)
+# you should use `alphaold-cc'.
+#
+#	"What's in a name? That which we call a rose
+#	 By any other word would smell as sweet."
+#
+# - William Shakespeare, "Romeo & Juliet", Act II, scene II.
+#
+# For OSF/1 3.2b and earlier, and Digital UNIX 3.2c - 3.2g, with the
+# vendor compiler, use alphaold-cc.
+# For Digital UNIX 4.0 - 4.0e, with the vendor compiler, use alpha-cc.
+# For Tru64 UNIX 4.f - current, with the vendor compiler, use alpha-cc.
+#
+# There's also an alternate target available (which `config' will never
+# select) called alpha-cc-rpath.  This target builds an RPATH into the
+# shared libraries, which is very convenient on Tru64 since binaries
+# linked against that shared library will automatically inherit that RPATH,
+# and hence know where to look for the openssl libraries, even if they're in
+# an odd place.
+#
 # For gcc, the following gave a %50 speedup on a 164 over the 'DES_INT' version
-"alpha-gcc","gcc:-O3::(unknown)::SIXTY_FOUR_BIT_LONG RC4_CHUNK DES_UNROLL DES_RISC1:asm/alpha.o:::::::::dlfcn:true64-shared",
-"alpha-cc", "cc:-std1 -tune host -O4 -readonly_strings::(unknown)::SIXTY_FOUR_BIT_LONG RC4_CHUNK:asm/alpha.o:::::::::dlfcn:true64-shared",
-"alpha164-cc", "cc:-std1 -tune host -fast -readonly_strings::(unknown)::SIXTY_FOUR_BIT_LONG RC4_CHUNK:asm/alpha.o:::::::::dlfcn:true64-shared",
-"FreeBSD-alpha","gcc:-DTERMIOS -O -fomit-frame-pointer::(unknown)::SIXTY_FOUR_BIT_LONG RC4_CHUNK DES_INT DES_PTR DES_RISC2:::",
+#
+"alpha-gcc","gcc:-O3::(unknown)::SIXTY_FOUR_BIT_LONG RC4_CHUNK DES_UNROLL DES_RISC1:${alpha_asm}:dlfcn:alpha-osf1-shared:::.so",
+"alphaold-cc", "cc:-std1 -tune host -O4 -readonly_strings::(unknown)::SIXTY_FOUR_BIT_LONG RC4_CHUNK:${alpha_asm}:dlfcn:alpha-osf1-shared:::.so",
+"alpha164-cc", "cc:-std1 -tune host -fast -readonly_strings::-pthread::SIXTY_FOUR_BIT_LONG RC4_CHUNK:${alpha_asm}:dlfcn:tru64-shared:::.so",
+"alpha-cc", "cc:-std1 -tune host -fast -readonly_strings::-pthread::SIXTY_FOUR_BIT_LONG RC4_CHUNK:${alpha_asm}:dlfcn:tru64-shared:::.so",
+"alpha-cc-rpath", "cc:-std1 -tune host -fast -readonly_strings::-pthread::SIXTY_FOUR_BIT_LONG RC4_CHUNK:${alpha_asm}:dlfcn:tru64-shared-rpath:::.so",
+#
+# This probably belongs in a different section.
+#
+"FreeBSD-alpha","gcc:-DTERMIOS -O -fomit-frame-pointer::(unknown)::SIXTY_FOUR_BIT_LONG RC4_CHUNK DES_INT DES_PTR DES_RISC2::::::::::dlfcn:bsd-gcc-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
 
 #### Alpha Linux with GNU C and Compaq C setups
 # Special notes:
@@ -280,31 +326,34 @@ my %table=(
 #
 #					<appro@fy.chalmers.se>
 #
-"linux-alpha-gcc","gcc:-O3 -DL_ENDIAN -DTERMIO::-D_REENTRANT::SIXTY_FOUR_BIT_LONG RC4_CHUNK DES_RISC1 DES_UNROLL:asm/alpha.o::",
-"linux-alpha+bwx-gcc","gcc:-O3 -DL_ENDIAN -DTERMIO::-D_REENTRANT::SIXTY_FOUR_BIT_LONG RC4_CHAR RC4_CHUNK DES_RISC1 DES_UNROLL:asm/alpha.o::",
-"linux-alpha-ccc","ccc:-fast -readonly_strings -DL_ENDIAN -DTERMIO::-D_REENTRANT::SIXTY_FOUR_BIT_LONG RC4_CHUNK DES_INT DES_PTR DES_RISC1 DES_UNROLL:asm/alpha.o::",
-"linux-alpha+bwx-ccc","ccc:-fast -readonly_strings -DL_ENDIAN -DTERMIO::-D_REENTRANT::SIXTY_FOUR_BIT_LONG RC4_CHAR RC4_CHUNK DES_INT DES_PTR DES_RISC1 DES_UNROLL:asm/alpha.o::",
+"linux-alpha-gcc","gcc:-O3 -DL_ENDIAN -DTERMIO::-D_REENTRANT:-ldl:SIXTY_FOUR_BIT_LONG RC4_CHUNK DES_RISC1 DES_UNROLL:${alpha_asm}:dlfcn:linux-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
+"linux-alpha+bwx-gcc","gcc:-O3 -DL_ENDIAN -DTERMIO::-D_REENTRANT:-ldl:SIXTY_FOUR_BIT_LONG RC4_CHAR RC4_CHUNK DES_RISC1 DES_UNROLL:${alpha_asm}:dlfcn:linux-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
+"linux-alpha-ccc","ccc:-fast -readonly_strings -DL_ENDIAN -DTERMIO::-D_REENTRANT::SIXTY_FOUR_BIT_LONG RC4_CHUNK DES_INT DES_PTR DES_RISC1 DES_UNROLL:${alpha_asm}",
+"linux-alpha+bwx-ccc","ccc:-fast -readonly_strings -DL_ENDIAN -DTERMIO::-D_REENTRANT::SIXTY_FOUR_BIT_LONG RC4_CHAR RC4_CHUNK DES_INT DES_PTR DES_RISC1 DES_UNROLL:${alpha_asm}",
 
 # assembler versions -- currently defunct:
-##"OpenBSD-alpha","gcc:-DTERMIOS -O3 -fomit-frame-pointer::(unknown):SIXTY_FOUR_BIT_LONG DES_INT DES_PTR DES_RISC2:asm/alpha.o::",
+##"OpenBSD-alpha","gcc:-DTERMIOS -O3 -fomit-frame-pointer::(unknown):SIXTY_FOUR_BIT_LONG DES_INT DES_PTR DES_RISC2:${alpha_asm}",
 
 # The intel boxes :-), It would be worth seeing if bsdi-gcc can use the
 # bn86-elf.o file file since it is hand tweaked assembler.
-"linux-elf",	"gcc:-DL_ENDIAN -DTERMIO -O3 -fomit-frame-pointer -m486 -Wall::-D_REENTRANT:-ldl:BN_LLONG ${x86_gcc_des} ${x86_gcc_opts}:${x86_elf_asm}:dlfcn:linux-shared:-fPIC",
-"debug-linux-elf","gcc:-DBN_DEBUG -DREF_CHECK -DCONF_DEBUG -DBN_CTX_DEBUG -DCRYPTO_MDEBUG -DL_ENDIAN -DTERMIO -g -m486 -Wall::-D_REENTRANT:-lefence -ldl:BN_LLONG ${x86_gcc_des} ${x86_gcc_opts}:${x86_elf_asm}:dlfcn",
+"linux-elf",	"gcc:-DL_ENDIAN -DTERMIO -O3 -fomit-frame-pointer -m486 -Wall::-D_REENTRANT:-ldl:BN_LLONG ${x86_gcc_des} ${x86_gcc_opts}:${x86_elf_asm}:dlfcn:linux-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
+"debug-linux-elf","gcc:-DBN_DEBUG -DREF_CHECK -DCONF_DEBUG -DBN_CTX_DEBUG -DCRYPTO_MDEBUG -DL_ENDIAN -DTERMIO -g -m486 -Wall::-D_REENTRANT:-lefence -ldl:BN_LLONG ${x86_gcc_des} ${x86_gcc_opts}:${x86_elf_asm}:dlfcn:linux-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
 "debug-linux-elf-noefence","gcc:-DBN_DEBUG -DREF_CHECK -DCONF_DEBUG -DBN_CTX_DEBUG -DCRYPTO_MDEBUG -DL_ENDIAN -DTERMIO -g -m486 -Wall::-D_REENTRANT:-ldl:BN_LLONG ${x86_gcc_des} ${x86_gcc_opts}:${x86_elf_asm}:dlfcn",
 "linux-aout",	"gcc:-DL_ENDIAN -DTERMIO -O3 -fomit-frame-pointer -m486 -Wall::(unknown)::BN_LLONG ${x86_gcc_des} ${x86_gcc_opts}:${x86_out_asm}",
-"linux-mips",   "gcc:-DL_ENDIAN -DTERMIO -O3 -fomit-frame-pointer -Wall::(unknown)::BN_LLONG:::",
-"linux-ppc",    "gcc:-DB_ENDIAN -DTERMIO -O3 -fomit-frame-pointer -Wall::-D_REENTRANT::BN_LLONG::",
+"linux-mipsel",   "gcc:-DL_ENDIAN -DTERMIO -O3 -fomit-frame-pointer -Wall::(unknown)::BN_LLONG:::",
+"linux-mips",   "gcc:-DB_ENDIAN -DTERMIO -O3 -fomit-frame-pointer -Wall::(unknown)::BN_LLONG:::",
+"linux-ppc",	"gcc:-DB_ENDIAN -DTERMIO -O3 -fomit-frame-pointer -Wall::-D_REENTRANT:-ldl:BN_LLONG RC4_CHAR RC4_CHUNK DES_RISC1 DES_UNROLL::::::::::dlfcn:linux-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
 "linux-m68k",   "gcc:-DB_ENDIAN -DTERMIO -O2 -fomit-frame-pointer -Wall::-D_REENTRANT::BN_LLONG::",
-"linux-ia64",   "gcc:-DL_ENDIAN -DTERMIO -O3 -fomit-frame-pointer -Wall::(unknown)::SIXTY_FOUR_BIT_LONG::",
-"NetBSD-sparc",	"gcc:-DTERMIOS -O3 -fomit-frame-pointer -mv8 -Wall -DB_ENDIAN::(unknown)::BN_LLONG MD2_CHAR RC4_INDEX DES_UNROLL:::",
-"NetBSD-m68",	"gcc:-DTERMIOS -O3 -fomit-frame-pointer -Wall -DB_ENDIAN::(unknown)::BN_LLONG MD2_CHAR RC4_INDEX DES_UNROLL:::",
-"NetBSD-x86",	"gcc:-DTERMIOS -O3 -fomit-frame-pointer -m486 -Wall::(unknown)::BN_LLONG ${x86_gcc_des} ${x86_gcc_opts}:",
-"FreeBSD-elf",  "gcc:-DTERMIOS -DL_ENDIAN -fomit-frame-pointer -O3 -m486 -Wall::(unknown)::BN_LLONG ${x86_gcc_des} ${x86_gcc_opts}:${x86_elf_asm}",
+"linux-s390",	"gcc:-DB_ENDIAN -DTERMIO -DNO_ASM -O3 -fomit-frame-pointer -Wall::-D_REENTRANT:-ldl:BN_LLONG::::::::::dlfcn:linux-shared:-fPIC::.so.\$(SHLIB_MAJOR),\$(SHLIB_MINOR)",
+"linux-s390x", "gcc:-DB_ENDIAN -DTERMIO -DNO_ASM -O3 -fomit-frame-pointer -Wall::-D_REENTRANT:-ldl:SIXTY_FOUR_BIT_LONG::::::::::dlfcn:linux-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
+"linux-ia64",   "gcc:-DL_ENDIAN -DTERMIO -O3 -fomit-frame-pointer -Wall::-D_REENTRANT:-ldl:SIXTY_FOUR_BIT_LONG RC4_CHUNK RC4_CHAR:asm/ia64.o:::::::::dlfcn:linux-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
+"NetBSD-sparc",	"gcc:-DTERMIOS -O3 -fomit-frame-pointer -mv8 -Wall -DB_ENDIAN::(unknown)::BN_LLONG MD2_CHAR RC4_INDEX DES_UNROLL::::::::::dlfcn:bsd-gcc-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
+"NetBSD-m68",	"gcc:-DTERMIOS -O3 -fomit-frame-pointer -Wall -DB_ENDIAN::(unknown)::BN_LLONG MD2_CHAR RC4_INDEX DES_UNROLL::::::::::dlfcn:bsd-gcc-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
+"NetBSD-x86",	"gcc:-DTERMIOS -O3 -fomit-frame-pointer -m486 -Wall::(unknown)::BN_LLONG ${x86_gcc_des} ${x86_gcc_opts}::::::::::dlfcn:bsd-gcc-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
+"FreeBSD-elf",  "gcc:-DTERMIOS -DL_ENDIAN -fomit-frame-pointer -O3 -m486 -Wall::-pthread -D_REENTRANT -D_THREAD_SAFE -D_THREADSAFE::BN_LLONG ${x86_gcc_des} ${x86_gcc_opts}:${x86_elf_asm}:dlfcn:bsd-gcc-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
 "FreeBSD",      "gcc:-DTERMIOS -DL_ENDIAN -fomit-frame-pointer -O3 -m486 -Wall::(unknown)::BN_LLONG ${x86_gcc_des} ${x86_gcc_opts}:${x86_out_asm}",
 "bsdi-gcc",     "gcc:-O3 -ffast-math -DL_ENDIAN -DPERL5 -m486::(unknown)::RSA_LLONG ${x86_gcc_des} ${x86_gcc_opts}:${x86_bsdi_asm}",
-"bsdi-elf-gcc",     "gcc:-DPERL5 -DL_ENDIAN -fomit-frame-pointer -O3 -m486 -Wall::(unknown)::BN_LLONG ${x86_gcc_des} ${x86_gcc_opts}:${x86_elf_asm}",
+"bsdi-elf-gcc",     "gcc:-DPERL5 -DL_ENDIAN -fomit-frame-pointer -O3 -m486 -Wall::(unknown):-ldl:BN_LLONG ${x86_gcc_des} ${x86_gcc_opts}:${x86_elf_asm}:dlfcn:bsd-gcc-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
 "nextstep",	"cc:-O -Wall:<libc.h>:(unknown)::BN_LLONG ${x86_gcc_des} ${x86_gcc_opts}:::",
 "nextstep3.3",	"cc:-O3 -Wall:<libc.h>:(unknown)::BN_LLONG ${x86_gcc_des} ${x86_gcc_opts}:::",
 # NCR MP-RAS UNIX ver 02.03.01
@@ -313,22 +362,43 @@ my %table=(
 # QNX 4
 "qnx4",	"cc:-DL_ENDIAN -DTERMIO::(unknown)::${x86_gcc_des} ${x86_gcc_opts}:",
 
-# Linux on ARM
-"linux-elf-arm","gcc:-DL_ENDIAN -DTERMIO -O3 -fomit-frame-pointer -Wall::-D_REENTRANT::BN_LLONG::::::::::dlfcn:linux-shared:-fPIC",
+# QNX 6
+"qnx6",	"cc:-DL_ENDIAN -DTERMIOS::(unknown):-lsocket:${x86_gcc_des} ${x86_gcc_opts}:",
 
-# UnixWare 2.0
-"unixware-2.0","cc:-O -DFILIO_H::(unknown):-lsocket -lnsl:${x86_gcc_des} ${x86_gcc_opts}:::",
-"unixware-2.0-pentium","cc:-O -DFILIO_H -Kpentium -Kthread::(unknown):-lsocket -lnsl:MD2_CHAR RC4_INDEX ${x86_gcc_des}::",
+# Linux on ARM
+"linux-elf-arm","gcc:-DL_ENDIAN -DTERMIO -O3 -fomit-frame-pointer -Wall::-D_REENTRANT::BN_LLONG::::::::::dlfcn:linux-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
+
+# UnixWare 2.0x fails destest with -O
+"unixware-2.0","cc:-DFILIO_H::-Kthread:-lsocket -lnsl -lx:${x86_gcc_des} ${x86_gcc_opts}:::",
+"unixware-2.0-pentium","cc:-DFILIO_H -Kpentium::-Kthread:-lsocket -lnsl -lx:MD2_CHAR RC4_INDEX ${x86_gcc_des}::",
+
+# UnixWare 2.1
+"unixware-2.1","cc:-O -DFILIO_H::-Kthread:-lsocket -lnsl -lx:${x86_gcc_des} ${x86_gcc_opts}:::",
+"unixware-2.1-pentium","cc:-O -DFILIO_H -Kpentium::-Kthread:-lsocket -lnsl -lx:MD2_CHAR RC4_INDEX ${x86_gcc_des}::",
+"unixware-2.1-p6","cc:-O -DFILIO_H -Kp6::-Kthread:-lsocket -lnsl -lx:MD2_CHAR RC4_INDEX ${x86_gcc_des}::",
 
 # UnixWare 7
-"unixware-7","cc:-O -DFILIO_H -Kalloca::-Kthread:-lsocket -lnsl:MD2_CHAR RC4_INDEX ${x86_gcc_des}::",
+"unixware-7","cc:-O -DFILIO_H -Kalloca::-Kthread:-lsocket -lnsl:BN_LLONG MD2_CHAR RC4_INDEX ${x86_gcc_des}::",
+"unixware-7-pentium","cc:-O -DFILIO_H -Kalloca -Kpentium::-Kthread:-lsocket -lnsl:BN_LLONG MD2_CHAR RC4_INDEX ${x86_gcc_des}::",
+"unixware-7-pentium_pro","cc:-O -DFILIO_H -Kalloca -Kpentium_pro::-Kthread:-lsocket -lnsl:BN_LLONG MD2_CHAR RC4_INDEX ${x86_gcc_des}::",
+"unixware-7-gcc","gcc:-DL_ENDIAN -DFILIO_H -O3 -fomit-frame-pointer -m486 -Wall::-D_REENTRANT:-lsocket -lnsl:BN_LLONG ${x86_gcc_des} ${x86_gcc_opts}::::::::::dlfcn:gnu-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
+
+# OpenUNIX 8
+"OpenUNIX-8","cc:-O -DFILIO_H -Kalloca::-Kthread:-lsocket -lnsl:BN_LLONG MD2_CHAR RC4_INDEX ${x86_gcc_des}::",
+"OpenUNIX-8-gcc","gcc:-O -DFILIO_H -fomit-frame-pointer::-pthread:-lsocket -lnsl:BN_LLONG MD2_CHAR RC4_INDEX ${x86_gcc_des}::",
+"OpenUNIX-8-pentium","cc:-O -DFILIO_H -Kalloca -Kpentium::-Kthread:-lsocket -lnsl:BN_LLONG MD2_CHAR RC4_INDEX ${x86_gcc_des}::",
+"OpenUNIX-8-pentium_pro","cc:-O -DFILIO_H -Kalloca -Kpentium_pro::-Kthread:-lsocket -lnsl:BN_LLONG MD2_CHAR RC4_INDEX ${x86_gcc_des}::",
+"OpenUNIX-8-shared","cc:-O -DFILIO_H -Kalloca::-Kthread:-lsocket -lnsl:MD2_CHAR RC4_INDEX ${x86_gcc_des}::::::::::dlfcn:svr5-shared:-Kpic",
+"OpenUNIX-8-gcc-shared","gcc:-O3 -DFILIO_H -fomit-frame-pointer::-pthread:-lsocket -lnsl:BN_LLONG ${x86_gcc_des} ${x86_gcc_opts}:${x86_elf_asm}:dlfcn:svr5-shared:-fPIC",
 
 # IBM's AIX.
 "aix-cc",   "cc:-O -DAIX -DB_ENDIAN -qmaxmem=16384::(unknown)::BN_LLONG RC4_CHAR:::",
 "aix-gcc",  "gcc:-O3 -DAIX -DB_ENDIAN::(unknown)::BN_LLONG RC4_CHAR:::",
+"aix43-cc",   "cc:-O -DAIX -DB_ENDIAN -qmaxmem=16384::(unknown)::BN_LLONG RC4_CHAR::::::::::dlfcn:",
+"aix43-gcc",  "gcc:-O1 -DAIX -DB_ENDIAN::(unknown)::BN_LLONG RC4_CHAR::::::::::dlfcn:",
 
 #
-# Cray T90 (SDSC)
+# Cray T90 and similar (SDSC)
 # It's Big-endian, but the algorithms work properly when B_ENDIAN is NOT
 # defined.  The T90 ints and longs are 8 bytes long, and apparently the
 # B_ENDIAN code assumes 4 byte ints.  Fortunately, the non-B_ENDIAN and
@@ -338,7 +408,10 @@ my %table=(
 #'Taking the address of a bit field is not allowed. '
 #'An expression with bit field exists as the operand of "sizeof" '
 # (written by Wayne Schroeder <schroede@SDSC.EDU>)
-"cray-t90-cc", "cc: -DBIT_FIELD_LIMITS -DTERMIOS::(unknown)::SIXTY_FOUR_BIT_LONG DES_INT:::",
+#
+# j90 is considered the base machine type for unicos machines,
+# so this configuration is now called "cray-j90" ...
+"cray-j90", "cc: -DBIT_FIELD_LIMITS -DTERMIOS::(unknown)::SIXTY_FOUR_BIT_LONG DES_INT:::",
 
 #
 # Cray T3E (Research Center Juelich, beckman@acl.lanl.gov)
@@ -352,13 +425,19 @@ my %table=(
 
 # DGUX, 88100.
 "dgux-R3-gcc",	"gcc:-O3 -fomit-frame-pointer::(unknown)::RC4_INDEX DES_UNROLL:::",
-"dgux-R4-gcc",	"gcc:-O3 -fomit-frame-pointer::(unknown):-lnsl -lsocket:RC4_INDEX:RC4_INDEX DES_UNROLL:::",
+"dgux-R4-gcc",	"gcc:-O3 -fomit-frame-pointer::(unknown):-lnsl -lsocket:RC4_INDEX DES_UNROLL:::",
 "dgux-R4-x86-gcc",	"gcc:-O3 -fomit-frame-pointer -DL_ENDIAN::(unknown):-lnsl -lsocket:BN_LLONG ${x86_gcc_des} ${x86_gcc_opts}:${x86_elf_asm}",
 
+# SCO 3 - Tim Rice <tim@multitalents.net>
+"sco3-gcc",  "gcc:-O3 -fomit-frame-pointer -Dssize_t=int -DNO_SYS_UN_H::(unknown):-lsocket:BN_LLONG ${x86_gcc_des} ${x86_gcc_opts}:::", # the SCO assembler doesn't seem to like our assembler files ...
+
 # SCO 5 - Ben Laurie <ben@algroup.co.uk> says the -O breaks the
 # SCO cc.
-"sco5-cc",  "cc:::(unknown):-lsocket:${x86_gcc_des} ${x86_gcc_opts}:::", # des options?
+"sco5-cc",  "cc:-belf::(unknown):-lsocket -lresolv:${x86_gcc_des} ${x86_gcc_opts}:::", # des options?
+"sco5-cc-pentium",  "cc:-Kpentium::(unknown):-lsocket:${x86_gcc_des} ${x86_gcc_opts}:::", # des options?
 "sco5-gcc",  "gcc:-O3 -fomit-frame-pointer::(unknown):-lsocket:BN_LLONG ${x86_gcc_des} ${x86_gcc_opts}:::", # the SCO assembler doesn't seem to like our assembler files ...
+"sco5-cc-shared","cc:-belf:::-lsocket -lresolv -lnsl:MD2_CHAR RC4_INDEX ${x86_gcc_des}::::::::::dlfcn:svr3-shared:-Kpic",
+"sco5-gcc-shared","gcc:-O3 -fomit-frame-pointer:::-lsocket -lresolv -lnsl:BN_LLONG ${x86_gcc_des} ${x86_gcc_opts}::::::::::dlfcn:svr3-shared:-fPIC", # the SCO assembler doesn't seem to like our assembler files ...
 
 # Sinix/ReliantUNIX RM400
 # NOTE: The CDS++ Compiler up to V2.0Bsomething has the IRIX_CC_BUG optimizer problem. Better use -g  */
@@ -369,6 +448,12 @@ my %table=(
 # SIEMENS BS2000/OSD: an EBCDIC-based mainframe
 "BS2000-OSD","c89:-O -XLLML -XLLMK -XL -DB_ENDIAN -DTERMIOS -DCHARSET_EBCDIC::(unknown):-lsocket -lnsl:THIRTY_TWO_BIT DES_PTR DES_UNROLL MD2_CHAR RC4_INDEX RC4_CHAR BF_PTR:::",
 
+# OS/390 Unix an EBCDIC-based Unix system on IBM mainframe
+# You need to compile using the c89.sh wrapper in the tools directory, because the
+# IBM compiler does not like the -L switch after any object modules.
+#
+"OS390-Unix","c89.sh:-O -DB_ENDIAN -DCHARSET_EBCDIC -DNO_SYS_PARAM_H  -D_ALL_SOURCE::(unknown)::THIRTY_TWO_BIT DES_PTR DES_UNROLL MD2_CHAR RC4_INDEX RC4_CHAR BF_PTR:::",
+
 # Windows NT, Microsoft Visual C++ 4.0
 
 "VC-NT","cl:::::BN_LLONG RC4_INDEX ${x86_gcc_opts}::::::::::win32",
@@ -387,8 +472,12 @@ my %table=(
 # and its library files in util/pl/*)
 "Mingw32", "gcc:-DL_ENDIAN -fomit-frame-pointer -O3 -m486 -Wall::::BN_LLONG ${x86_gcc_des} ${x86_gcc_opts}::::::::::win32",
 
-# CygWin32
-"CygWin32", "gcc:-DTERMIOS -DL_ENDIAN -fomit-frame-pointer -O3 -m486 -Wall::::BN_LLONG ${x86_gcc_des} ${x86_gcc_opts}::::::::::win32",
+# UWIN 
+"UWIN", "cc:-DTERMIOS -DL_ENDIAN -O -Wall::::BN_LLONG ${x86_gcc_des} ${x86_gcc_opts}::::::::::win32",
+
+# Cygwin
+"Cygwin-pre1.3", "gcc:-DTERMIOS -DL_ENDIAN -fomit-frame-pointer -O2 -m486 -Wall::(unknown)::BN_LLONG ${x86_gcc_des} ${x86_gcc_opts}::::::::::win32",
+"Cygwin", "gcc:-DTERMIOS -DL_ENDIAN -fomit-frame-pointer -O2 -march=i486 -Wall::::BN_LLONG ${x86_gcc_des} ${x86_gcc_opts}::::::::::win32:cygwin-shared:::.dll",
 
 # Ultrix from Bernhard Simon <simon@zid.tuwien.ac.at>
 "ultrix-cc","cc:-std1 -O -Olimit 1000 -DL_ENDIAN::(unknown)::::::",
@@ -397,24 +486,58 @@ my %table=(
 ##"ultrix","cc:-O2 -DNOPROTO -DNOCONST -DL_ENDIAN::(unknown)::::::",
 
 # Some OpenBSD from Bob Beck <beck@obtuse.com>
-"OpenBSD-alpha","gcc:-DTERMIOS -O3 -fomit-frame-pointer::(unknown)::SIXTY_FOUR_BIT_LONG DES_INT DES_PTR DES_RISC2:::",
-"OpenBSD-x86",  "gcc:-DL_ENDIAN -DTERMIOS -O3 -fomit-frame-pointer -m486::(unknown)::BN_LLONG ${x86_gcc_des} ${x86_gcc_opts}:${x86_out_asm}:dlfcn",
-"OpenBSD",      "gcc:-DTERMIOS -O3 -fomit-frame-pointer::(unknown)::BN_LLONG RC2_CHAR RC4_INDEX DES_UNROLL:::",
-"OpenBSD-mips","gcc:-O2 -DL_ENDIAN::(unknown):BN_LLONG MD2_CHAR RC4_INDEX RC4_CHAR DES_UNROLL DES_RISC2 DES_PTR BF_PTR::::",
+"OpenBSD-alpha","gcc:-DTERMIOS -O3 -fomit-frame-pointer::(unknown)::SIXTY_FOUR_BIT_LONG DES_INT DES_PTR DES_RISC2::::::::::dlfcn:bsd-gcc-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
+"OpenBSD-x86",  "gcc:-DL_ENDIAN -DTERMIOS -O3 -fomit-frame-pointer -m486::(unknown)::BN_LLONG ${x86_gcc_des} ${x86_gcc_opts}:${x86_out_asm}:dlfcn:bsd-gcc-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
+"OpenBSD",      "gcc:-DTERMIOS -O3 -fomit-frame-pointer::(unknown)::BN_LLONG RC2_CHAR RC4_INDEX DES_UNROLL::::::::::dlfcn:bsd-gcc-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
+"OpenBSD-mips","gcc:-O2 -DL_ENDIAN::(unknown):BN_LLONG MD2_CHAR RC4_INDEX RC4_CHAR DES_UNROLL DES_RISC2 DES_PTR BF_PTR:::::::::::dlfcn:bsd-gcc-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
 
-##### MacOS X (a.k.a. Rhapsody) setup
+##### MacOS X (a.k.a. Rhapsody or Darwin) setup
 "rhapsody-ppc-cc","cc:-O3 -DB_ENDIAN::(unknown)::BN_LLONG RC4_CHAR RC4_CHUNK DES_UNROLL BF_PTR:::",
+"darwin-ppc-cc","cc:-O3 -D_DARWIN -DB_ENDIAN -fno-common::-D_REENTRANT::BN_LLONG RC4_CHAR RC4_CHUNK DES_UNROLL BF_PTR:::::::::::darwin-shared:-fPIC::.\$(SHLIB_MAJOR).\$(SHLIB_MINOR).dylib",
+
+##### A/UX
+"aux3-gcc","gcc:-O2 -DTERMIO::(unknown):-lbsd:RC4_CHAR RC4_CHUNK DES_UNROLL BF_PTR:::",
 
 ##### Sony NEWS-OS 4.x
 "newsos4-gcc","gcc:-O -DB_ENDIAN -DNEWS4::(unknown):-lmld -liberty:BN_LLONG RC4_CHAR RC4_CHUNK DES_PTR DES_RISC1 DES_UNROLL BF_PTR::::",
 
+##### VxWorks for various targets
+"vxworks-ppc405","ccppc:-g -msoft-float -mlongcall -DVXWORKS -DCPU=PPC405 -I\$(WIND_BASE)/target/h:::-r:::::",
+
+##### Compaq Non-Stop Kernel (Tandem)
+"tandem-c89","c89:-Ww -D__TANDEM -D_XOPEN_SOURCE -D_XOPEN_SOURCE_EXTENDED=1 -D_TANDEM_SOURCE -DB_ENDIAN::(unknown)::THIRTY_TWO_BIT:::",
+
 );
 
 my @WinTargets=qw(VC-NT VC-WIN32 VC-WIN16 VC-W31-16 VC-W31-32 VC-MSDOS BC-32
 	BC-16 Mingw32);
 
+my $idx = 0;
+my $idx_cc = $idx++;
+my $idx_cflags = $idx++;
+my $idx_unistd = $idx++;
+my $idx_thread_cflag = $idx++;
+my $idx_lflags = $idx++;
+my $idx_bn_ops = $idx++;
+my $idx_bn_obj = $idx++;
+my $idx_des_obj = $idx++;
+my $idx_bf_obj = $idx++;
+my $idx_md5_obj = $idx++;
+my $idx_sha1_obj = $idx++;
+my $idx_cast_obj = $idx++;
+my $idx_rc4_obj = $idx++;
+my $idx_rmd160_obj = $idx++;
+my $idx_rc5_obj = $idx++;
+my $idx_dso_scheme = $idx++;
+my $idx_shared_target = $idx++;
+my $idx_shared_cflag = $idx++;
+my $idx_shared_ldflag = $idx++;
+my $idx_shared_extension = $idx++;
+my $idx_ranlib = $idx++;
+
 my $prefix="";
 my $openssldir="";
+my $exe_ext="";
 my $install_prefix="";
 my $no_threads=0;
 my $no_shared=1;
@@ -442,10 +565,10 @@ my $md5_obj="";
 my $sha1_obj="";
 my $rmd160_obj="";
 my $processor="";
-my $ranlib;
+my $default_ranlib;
 my $perl;
 
-$ranlib=&which("ranlib") or $ranlib="true";
+$default_ranlib= &which("ranlib") or $default_ranlib="true";
 $perl=$ENV{'PERL'} or $perl=&which("perl5") or $perl=&which("perl")
   or $perl="perl";
 
@@ -460,6 +583,7 @@ my $libs;
 my $target;
 my $options;
 my $symlink;
+my $make_depend=0;
 
 my @argvcopy=@ARGV;
 my $argvstring="";
@@ -484,7 +608,11 @@ PROCESS_ARGS:
 	foreach (@argvcopy)
 		{
 		s /^-no-/no-/; # some people just can't read the instructions
-		if (/^no-asm$/)
+		if (/^--test-sanity$/)
+			{
+			exit(&test_sanity());
+			}
+		elsif (/^no-asm$/)
 		 	{
 			$no_asm=1;
 			$flags .= "-DNO_ASM ";
@@ -498,7 +626,7 @@ PROCESS_ARGS:
 			{ $threads=1; }
 		elsif (/^no-shared$/)
 			{ $no_shared=1; }
-		elsif (/^shared$/)
+		elsif (/^shared$/ || /^-shared$/ || /^--shared$/)
 			{ $no_shared=0; }
 		elsif (/^no-symlinks$/)
 			{ $symlink=0; }
@@ -613,12 +741,17 @@ if ($target eq "LIST") {
 	exit 0;
 }
 
+if ($target =~ m/^CygWin32(-.*)$/) {
+	$target = "Cygwin".$1;
+}
+
 print "Configuring for $target\n";
 
 &usage if (!defined($table{$target}));
 
 my $IsWindows=scalar grep /^$target$/,@WinTargets;
 
+$exe_ext=".exe" if ($target eq "Cygwin");
 $openssldir="/usr/local/ssl" if ($openssldir eq "" and $prefix eq "");
 $prefix=$openssldir if $prefix eq "";
 
@@ -631,9 +764,29 @@ $openssldir=$prefix . "/" . $openssldir if $openssldir !~ /^\//;
 
 print "IsWindows=$IsWindows\n";
 
-(my $cc,my $cflags,my $unistd,my $thread_cflag,my $lflags,my $bn_ops,my $bn_obj,my $des_obj,my $bf_obj,
- $md5_obj,$sha1_obj,my $cast_obj,my $rc4_obj,$rmd160_obj,my $rc5_obj,my $dso_scheme,my $shared_target,my $shared_cflag)=
-	split(/\s*:\s*/,$table{$target} . ":" x 22 , -1);
+my @fields = split(/\s*:\s*/,$table{$target} . ":" x 30 , -1);
+my $cc = $fields[$idx_cc];
+my $cflags = $fields[$idx_cflags];
+my $unistd = $fields[$idx_unistd];
+my $thread_cflag = $fields[$idx_thread_cflag];
+my $lflags = $fields[$idx_lflags];
+my $bn_ops = $fields[$idx_bn_ops];
+my $bn_obj = $fields[$idx_bn_obj];
+my $des_obj = $fields[$idx_des_obj];
+my $bf_obj = $fields[$idx_bf_obj];
+my $md5_obj = $fields[$idx_md5_obj];
+my $sha1_obj = $fields[$idx_sha1_obj];
+my $cast_obj = $fields[$idx_cast_obj];
+my $rc4_obj = $fields[$idx_rc4_obj];
+my $rmd160_obj = $fields[$idx_rmd160_obj];
+my $rc5_obj = $fields[$idx_rc5_obj];
+my $dso_scheme = $fields[$idx_dso_scheme];
+my $shared_target = $fields[$idx_shared_target];
+my $shared_cflag = $fields[$idx_shared_cflag];
+my $shared_ldflag = $fields[$idx_shared_ldflag];
+my $shared_extension = $fields[$idx_shared_extension];
+my $ranlib = $fields[$idx_ranlib];
+
 $cflags="$flags$cflags" if ($flags ne "");
 
 # The DSO code currently always implements all functions so that no
@@ -708,17 +861,27 @@ if ($threads)
 	}
 
 # You will find shlib_mark1 and shlib_mark2 explained in Makefile.org
-my $shared_mark1 = "";
-my $shared_mark2 = "";
-if ($shared_cflag ne "")
+my $shared_mark = "";
+if ($shared_target ne "")
 	{
-	$cflags = "$shared_cflag $cflags";
+	if ($shared_cflag ne "")
+		{
+		$cflags = "$shared_cflag $cflags";
+		}
 	if (!$no_shared)
 		{
-		$shared_mark1 = ".shlib-clean.";
-		$shared_mark2 = ".shlib.";
+		#$shared_mark = "\$(SHARED_LIBS)";
 		}
 	}
+else
+	{
+	$no_shared = 1;
+	}
+
+if ($ranlib eq "")
+	{
+	$ranlib = $default_ranlib;
+	}
 
 #my ($bn1)=split(/\s+/,$bn_obj);
 #$bn1 = "" unless defined $bn1;
@@ -748,6 +911,10 @@ if ($rmd160_obj =~ /\.o$/)
 	$cflags.=" -DRMD160_ASM";
 	}
 
+# "Stringify" the C flags string.  This permits it to be made part of a string
+# and works as well on command lines.
+$cflags =~ s/([\\\"])/\\\1/g;
+
 my $version = "unknown";
 my $major = "unknown";
 my $minor = "unknown";
@@ -800,6 +967,7 @@ while (<IN>)
 	s/^SHLIB_VERSION_HISTORY=.*/SHLIB_VERSION_HISTORY=$shlib_version_history/;
 	s/^SHLIB_MAJOR=.*/SHLIB_MAJOR=$shlib_major/;
 	s/^SHLIB_MINOR=.*/SHLIB_MINOR=$shlib_minor/;
+	s/^SHLIB_EXT=.*/SHLIB_EXT=$shared_extension/;
 	s/^INSTALLTOP=.*$/INSTALLTOP=$prefix/;
 	s/^OPENSSLDIR=.*$/OPENSSLDIR=$openssldir/;
 	s/^INSTALL_PREFIX=.*$/INSTALL_PREFIX=$install_prefix/;
@@ -810,6 +978,7 @@ while (<IN>)
 	s/^CFLAG=.*$/CFLAG= $cflags/;
 	s/^DEPFLAG=.*$/DEPFLAG= $depflags/;
 	s/^EX_LIBS=.*$/EX_LIBS= $lflags/;
+	s/^EXE_EXT=.*$/EXE_EXT= $exe_ext/;
 	s/^BN_ASM=.*$/BN_ASM= $bn_obj/;
 	s/^DES_ENC=.*$/DES_ENC= $des_obj/;
 	s/^BF_ENC=.*$/BF_ENC= $bf_obj/;
@@ -823,9 +992,27 @@ while (<IN>)
 	s/^RANLIB=.*/RANLIB= $ranlib/;
 	s/^PERL=.*/PERL= $perl/;
 	s/^SHLIB_TARGET=.*/SHLIB_TARGET=$shared_target/;
-	s/^SHLIB_MARK1=.*/SHLIB_MARK1=$shared_mark1/;
-	s/^SHLIB_MARK2=.*/SHLIB_MARK2=$shared_mark2/;
-	s/^LIBS=.*/LIBS=libcrypto\.so\* libssl\.so\*/ if (!$no_shared);
+	s/^SHLIB_MARK=.*/SHLIB_MARK=$shared_mark/;
+	s/^SHARED_LIBS=.*/SHARED_LIBS=\$(SHARED_CRYPTO) \$(SHARED_SSL)/ if (!$no_shared);
+	if ($shared_extension ne "" && $shared_extension =~ /^\.s([ol])\.[^\.]*$/)
+		{
+		my $sotmp = $1;
+		s/^SHARED_LIBS_LINK_EXTS=.*/SHARED_LIBS_LINK_EXTS=.s$sotmp/;
+		}
+	elsif ($shared_extension ne "" && $shared_extension =~ /^\.[^\.]*\.dylib$/)
+		{
+		s/^SHARED_LIBS_LINK_EXTS=.*/SHARED_LIBS_LINK_EXTS=.dylib/;
+		}
+	elsif ($shared_extension ne "" && $shared_extension =~ /^\.s([ol])\.[^\.]*\.[^\.]*$/)
+		{
+		my $sotmp = $1;
+		s/^SHARED_LIBS_LINK_EXTS=.*/SHARED_LIBS_LINK_EXTS=.s$sotmp.\$(SHLIB_MAJOR) .s$sotmp/;
+		}
+	elsif ($shared_extension ne "" && $shared_extension =~ /^\.[^\.]*\.[^\.]*\.dylib$/)
+		{
+		s/^SHARED_LIBS_LINK_EXTS=.*/SHARED_LIBS_LINK_EXTS=.\$(SHLIB_MAJOR).dylib .dylib/;
+		}
+	s/^SHARED_LDFLAGS=.*/SHARED_LDFLAGS=$shared_ldflag/;
 	print OUT $_."\n";
 	}
 close(IN);
@@ -1008,11 +1195,13 @@ if($IsWindows) {
 EOF
 	close(OUT);
 } else {
-	(system "make -f Makefile.ssl PERL=\'$perl\' links") == 0 or exit $?
-		if $symlink;
-	### (system 'make depend') == 0 or exit $? if $depflags ne "";
-	# Run "make depend" manually if you want to be able to delete
-	# the source code files of ciphers you left out.
+	my $make_command = "make -f Makefile.ssl PERL=\'$perl\'";
+	my $make_targets = "";
+	$make_targets .= " links" if $symlink;
+	$make_targets .= " depend" if $depflags ne "" && $make_depend;
+	$make_targets .= " gentests" if $symlink;
+	(system $make_command.$make_targets) == 0 or exit $?
+		if $make_targets ne "";
 	if ( $perl =~ m@^/@) {
 	    &dofile("tools/c_rehash",$perl,'^#!/', '#!%s','^my \$dir;$', 'my $dir = "' . $openssldir . '";');
 	    &dofile("apps/der_chop",$perl,'^#!/', '#!%s');
@@ -1022,6 +1211,15 @@ EOF
 	    &dofile("tools/c_rehash",'/usr/local/bin/perl','^#!/', '#!%s','^my \$dir;$', 'my $dir = "' . $openssldir . '";');
 	    &dofile("apps/der_chop",'/usr/local/bin/perl','^#!/', '#!%s');
 	    &dofile("apps/CA.pl",'/usr/local/bin/perl','^#!/', '#!%s');
+	}
+	if ($depflags ne "" && !$make_depend) {
+		print <<EOF;
+
+Since you've disabled at least one algorithm, you need to do the following
+before building:
+
+	make depend
+EOF
 	}	    
 }
 
@@ -1112,8 +1310,9 @@ sub print_table_entry
 	(my $cc,my $cflags,my $unistd,my $thread_cflag,my $lflags,my $bn_ops,
 	my $bn_obj,my $des_obj,my $bf_obj,
 	my $md5_obj,my $sha1_obj,my $cast_obj,my $rc4_obj,my $rmd160_obj,
-	my $rc5_obj,my $dso_scheme,my $shared_target,my $shared_cflag)=
-	split(/\s*:\s*/,$table{$target} . ":" x 22 , -1);
+	my $rc5_obj,my $dso_scheme,my $shared_target,my $shared_cflag,
+	my $shared_ldflag,my $shared_extension,my $ranlib)=
+	split(/\s*:\s*/,$table{$target} . ":" x 30 , -1);
 			
 	print <<EOF
 
@@ -1136,5 +1335,44 @@ sub print_table_entry
 \$dso_scheme   = $dso_scheme
 \$shared_target= $shared_target
 \$shared_cflag = $shared_cflag
+\$shared_ldflag = $shared_ldflag
+\$shared_extension = $shared_extension
+\$ranlib       = $ranlib
 EOF
 	}
+
+sub test_sanity
+	{
+	my $errorcnt = 0;
+
+	print STDERR "=" x 70, "\n";
+	print STDERR "=== SANITY TESTING!\n";
+	print STDERR "=== No configuration will be done, all other arguments will be ignored!\n";
+	print STDERR "=" x 70, "\n";
+
+	foreach $target (sort keys %table)
+		{
+		@fields = split(/\s*:\s*/,$table{$target} . ":" x 30 , -1);
+
+		if ($fields[$idx_dso_scheme-1] =~ /^(dl|dlfcn|win32|vms)$/)
+			{
+			$errorcnt++;
+			print STDERR "SANITY ERROR: '$target' has the dso_scheme [$idx_dso_scheme] values\n";
+			print STDERR "              in the previous field\n";
+			}
+		elsif ($fields[$idx_dso_scheme+1] =~ /^(dl|dlfcn|win32|vms)$/)
+			{
+			$errorcnt++;
+			print STDERR "SANITY ERROR: '$target' has the dso_scheme [$idx_dso_scheme] values\n";
+			print STDERR "              in the following field\n";
+			}
+		elsif ($fields[$idx_dso_scheme] !~ /^(dl|dlfcn|win32|vms|)$/)
+			{
+			$errorcnt++;
+			print STDERR "SANITY ERROR: '$target' has the dso_scheme [$idx_dso_scheme] field = ",$fields[$idx_dso_scheme],"\n";
+			print STDERR "              valid values are 'dl', 'dlfcn', 'win32' and 'vms'\n";
+			}
+		}
+	print STDERR "No sanity errors detected!\n" if $errorcnt == 0;
+	return $errorcnt;
+	}

FAQ

@@ -1,20 +1,25 @@
 OpenSSL  -  Frequently Asked Questions
 --------------------------------------
 
+[MISC] Miscellaneous questions
+
 * Which is the current version of OpenSSL?
 * Where is the documentation?
 * How can I contact the OpenSSL developers?
-* Do I need patent licenses to use OpenSSL?
-* Is OpenSSL thread-safe?
-* Why do I get a "PRNG not seeded" error message?
-* Why does the linker complain about undefined symbols?
 * Where can I get a compiled version of OpenSSL?
-* I've compiled a program under Windows and it crashes: why?
-* How do I read or write a DER encoded buffer using the ASN1 functions?
-* I've tried using <M_some_evil_pkcs12_macro> and I get errors why?
-* I've called <some function> and it fails, why?
-* I just get a load of numbers for the error output, what do they mean?
-* Why do I get errors about unknown algorithms?
+* Why aren't tools like 'autoconf' and 'libtool' used?
+* What is an 'engine' version?
+* How do I check the authenticity of the OpenSSL distribution?
+
+[LEGAL] Legal questions
+
+* Do I need patent licenses to use OpenSSL?
+* Can I use OpenSSL with GPL software? 
+
+[USER] Questions on using the OpenSSL applications
+
+* Why do I get a "PRNG not seeded" error message?
+* Why do I get an "unable to write 'random state'" error message?
 * How do I create certificates or certificate requests?
 * Why can't I create certificate requests?
 * Why does <SSL program> fail with a certificate verify error?
@@ -22,17 +27,43 @@ OpenSSL  -  Frequently Asked Questions
 * How can I create DSA certificates?
 * Why can't I make an SSL connection using a DSA certificate?
 * How can I remove the passphrase on a private key?
-* Why can't the OpenSSH configure script detect OpenSSL?
+* Why can't I use OpenSSL certificates with SSL client authentication?
+* Why does my browser give a warning about a mismatched hostname?
+* How do I install a CA certificate into a browser?
+
+[BUILD] Questions about building and testing OpenSSL
+
+* Why does the linker complain about undefined symbols?
 * Why does the OpenSSL test fail with "bc: command not found"?
 * Why does the OpenSSL test fail with "bc: 1 no implemented"?
-* Why does the OpenSSL compilation fail on Alpha True64 Unix?
+* Why does the OpenSSL test fail with "bc: stack empty"?
+* Why does the OpenSSL compilation fail on Alpha Tru64 Unix?
 * Why does the OpenSSL compilation fail with "ar: command not found"?
+* Why does the OpenSSL compilation fail on Win32 with VC++?
+* What is special about OpenSSL on Redhat?
+* Why does the OpenSSL test suite fail on MacOS X?
 
+[PROG] Questions about programming with OpenSSL
+
+* Is OpenSSL thread-safe?
+* I've compiled a program under Windows and it crashes: why?
+* How do I read or write a DER encoded buffer using the ASN1 functions?
+* I've tried using <M_some_evil_pkcs12_macro> and I get errors why?
+* I've called <some function> and it fails, why?
+* I just get a load of numbers for the error output, what do they mean?
+* Why do I get errors about unknown algorithms?
+* Why can't the OpenSSH configure script detect OpenSSL?
+* Can I use OpenSSL's SSL library with non-blocking I/O?
+* Why doesn't my server application receive a client certificate?
+
+===============================================================================
+
+[MISC] ========================================================================
 
 * Which is the current version of OpenSSL?
 
 The current version is available from <URL: http://www.openssl.org>.
-OpenSSL 0.9.6 was released on September 24th, 2000.
+OpenSSL 0.9.6h was released on 5 December 2002.
 
 In addition to the current stable release, you can also access daily
 snapshots of the OpenSSL development version at <URL:
@@ -78,6 +109,46 @@ OpenSSL.  Information on the OpenSSL mailing lists is available from
 <URL: http://www.openssl.org>.
 
 
+* Where can I get a compiled version of OpenSSL?
+
+Some applications that use OpenSSL are distributed in binary form.
+When using such an application, you don't need to install OpenSSL
+yourself; the application will include the required parts (e.g. DLLs).
+
+If you want to install OpenSSL on a Windows system and you don't have
+a C compiler, read the "Mingw32" section of INSTALL.W32 for information
+on how to obtain and install the free GNU C compiler.
+
+A number of Linux and *BSD distributions include OpenSSL.
+
+
+* Why aren't tools like 'autoconf' and 'libtool' used?
+
+autoconf will probably be used in future OpenSSL versions. If it was
+less Unix-centric, it might have been used much earlier.
+
+* What is an 'engine' version?
+
+With version 0.9.6 OpenSSL was extended to interface to external crypto
+hardware. This was realized in a special release '0.9.6-engine'. With
+version 0.9.7 (not yet released) the changes were merged into the main
+development line, so that the special release is no longer necessary.
+
+* How do I check the authenticity of the OpenSSL distribution?
+
+We provide MD5 digests and ASC signatures of each tarball.
+Use MD5 to check that a tarball from a mirror site is identical:
+
+   md5sum TARBALL | awk '{print $1;}' | cmp - TARBALL.md5
+
+You can check authenticity using pgp or gpg. You need the OpenSSL team
+member public key used to sign it (download it from a key server). Then
+just do:
+
+   pgp TARBALL.asc
+
+[LEGAL] =======================================================================
+
 * Do I need patent licenses to use OpenSSL?
 
 The patents section of the README file lists patents that may apply to
@@ -89,17 +160,25 @@ You can configure OpenSSL so as not to use RC5 and IDEA by using
  ./config no-rc5 no-idea
 
 
-* Is OpenSSL thread-safe?
+* Can I use OpenSSL with GPL software?
 
-Yes (with limitations: an SSL connection may not concurrently be used
-by multiple threads).  On Windows and many Unix systems, OpenSSL
-automatically uses the multi-threaded versions of the standard
-libraries.  If your platform is not one of these, consult the INSTALL
-file.
+On many systems including the major Linux and BSD distributions, yes (the
+GPL does not place restrictions on using libraries that are part of the
+normal operating system distribution).
 
-Multi-threaded applications must provide two callback functions to
-OpenSSL.  This is described in the threads(3) manpage.
+On other systems, the situation is less clear. Some GPL software copyright
+holders claim that you infringe on their rights if you use OpenSSL with
+their software on operating systems that don't normally include OpenSSL.
 
+If you develop open source software that uses OpenSSL, you may find it
+useful to choose an other license than the GPL, or state explicitly that
+"This program is released under the GPL with the additional exemption that
+compiling, linking, and/or using OpenSSL is allowed."  If you are using
+GPL software developed by others, you may want to ask the copyright holder
+for permission to use their software with OpenSSL.
+
+
+[USER] ========================================================================
 
 * Why do I get a "PRNG not seeded" error message?
 
@@ -108,6 +187,7 @@ correctly.  Many open source operating systems provide a "randomness
 device" that serves this purpose.  On other systems, applications have
 to call the RAND_add() or RAND_seed() function with appropriate data
 before generating keys or performing public key encryption.
+(These functions initialize the pseudo-random number generator, PRNG.)
 
 Some broken applications do not do this.  As of version 0.9.5, the
 OpenSSL functions that need randomness report an error if the random
@@ -117,27 +197,177 @@ application you are using.  It is likely that it never worked
 correctly.  OpenSSL 0.9.5 and later make the error visible by refusing
 to perform potentially insecure encryption.
 
-On systems without /dev/urandom, it is a good idea to use the Entropy
-Gathering Demon; see the RAND_egd() manpage for details.
+On systems without /dev/urandom and /dev/random, it is a good idea to
+use the Entropy Gathering Demon (EGD); see the RAND_egd() manpage for
+details.  Starting with version 0.9.7, OpenSSL will automatically look
+for an EGD socket at /var/run/egd-pool, /dev/egd-pool, /etc/egd-pool and
+/etc/entropy.
 
-Most components of the openssl command line tool try to use the
-file $HOME/.rnd (or $RANDFILE, if this environment variable is set)
-for seeding the PRNG.  If this file does not exist or is too short,
-the "PRNG not seeded" error message may occur.
+Most components of the openssl command line utility automatically try
+to seed the random number generator from a file.  The name of the
+default seeding file is determined as follows: If environment variable
+RANDFILE is set, then it names the seeding file.  Otherwise if
+environment variable HOME is set, then the seeding file is $HOME/.rnd.
+If neither RANDFILE nor HOME is set, versions up to OpenSSL 0.9.6 will
+use file .rnd in the current directory while OpenSSL 0.9.6a uses no
+default seeding file at all.  OpenSSL 0.9.6b and later will behave
+similarly to 0.9.6a, but will use a default of "C:\" for HOME on
+Windows systems if the environment variable has not been set.
 
-[Note to OpenSSL 0.9.5 users: The command "openssl rsa" in version
-0.9.5 does not do this and will fail on systems without /dev/urandom
-when trying to password-encrypt an RSA key!  This is a bug in the
-library; try a later version instead.]
+If the default seeding file does not exist or is too short, the "PRNG
+not seeded" error message may occur.
+
+The openssl command line utility will write back a new state to the
+default seeding file (and create this file if necessary) unless
+there was no sufficient seeding.
+
+Pointing $RANDFILE to an Entropy Gathering Daemon socket does not work.
+Use the "-rand" option of the OpenSSL command line tools instead.
+The $RANDFILE environment variable and $HOME/.rnd are only used by the
+OpenSSL command line tools. Applications using the OpenSSL library
+provide their own configuration options to specify the entropy source,
+please check out the documentation coming the with application.
 
 For Solaris 2.6, Tim Nibbe <tnibbe@sprint.net> and others have suggested
 installing the SUNski package from Sun patch 105710-01 (Sparc) which
 adds a /dev/random device and make sure it gets used, usually through
 $RANDFILE.  There are probably similar patches for the other Solaris
-versions.  However, be warned that /dev/random is usually a blocking
-device, which may have some effects on OpenSSL.
+versions.  An official statement from Sun with respect to /dev/random
+support can be found at
+  http://sunsolve.sun.com/pub-cgi/retrieve.pl?doc=fsrdb/27606&zone_32=SUNWski
+However, be warned that /dev/random is usually a blocking device, which
+may have some effects on OpenSSL.
+A third party /dev/random solution for Solaris is available at
+  http://www.cosy.sbg.ac.at/~andi/
 
 
+* Why do I get an "unable to write 'random state'" error message?
+
+
+Sometimes the openssl command line utility does not abort with
+a "PRNG not seeded" error message, but complains that it is
+"unable to write 'random state'".  This message refers to the
+default seeding file (see previous answer).  A possible reason
+is that no default filename is known because neither RANDFILE
+nor HOME is set.  (Versions up to 0.9.6 used file ".rnd" in the
+current directory in this case, but this has changed with 0.9.6a.)
+
+
+* How do I create certificates or certificate requests?
+
+Check out the CA.pl(1) manual page. This provides a simple wrapper round
+the 'req', 'verify', 'ca' and 'pkcs12' utilities. For finer control check
+out the manual pages for the individual utilities and the certificate
+extensions documentation (currently in doc/openssl.txt).
+
+
+* Why can't I create certificate requests?
+
+You typically get the error:
+
+	unable to find 'distinguished_name' in config
+	problems making Certificate Request
+
+This is because it can't find the configuration file. Check out the
+DIAGNOSTICS section of req(1) for more information.
+
+
+* Why does <SSL program> fail with a certificate verify error?
+
+This problem is usually indicated by log messages saying something like
+"unable to get local issuer certificate" or "self signed certificate".
+When a certificate is verified its root CA must be "trusted" by OpenSSL
+this typically means that the CA certificate must be placed in a directory
+or file and the relevant program configured to read it. The OpenSSL program
+'verify' behaves in a similar way and issues similar error messages: check
+the verify(1) program manual page for more information.
+
+
+* Why can I only use weak ciphers when I connect to a server using OpenSSL?
+
+This is almost certainly because you are using an old "export grade" browser
+which only supports weak encryption. Upgrade your browser to support 128 bit
+ciphers.
+
+
+* How can I create DSA certificates?
+
+Check the CA.pl(1) manual page for a DSA certificate example.
+
+
+* Why can't I make an SSL connection to a server using a DSA certificate?
+
+Typically you'll see a message saying there are no shared ciphers when
+the same setup works fine with an RSA certificate. There are two possible
+causes. The client may not support connections to DSA servers most web
+browsers (including Netscape and MSIE) only support connections to servers
+supporting RSA cipher suites. The other cause is that a set of DH parameters
+has not been supplied to the server. DH parameters can be created with the
+dhparam(1) command and loaded using the SSL_CTX_set_tmp_dh() for example:
+check the source to s_server in apps/s_server.c for an example.
+
+
+* How can I remove the passphrase on a private key?
+
+Firstly you should be really *really* sure you want to do this. Leaving
+a private key unencrypted is a major security risk. If you decide that
+you do have to do this check the EXAMPLES sections of the rsa(1) and
+dsa(1) manual pages.
+
+
+* Why can't I use OpenSSL certificates with SSL client authentication?
+
+What will typically happen is that when a server requests authentication
+it will either not include your certificate or tell you that you have
+no client certificates (Netscape) or present you with an empty list box
+(MSIE). The reason for this is that when a server requests a client
+certificate it includes a list of CAs names which it will accept. Browsers
+will only let you select certificates from the list on the grounds that
+there is little point presenting a certificate which the server will
+reject.
+
+The solution is to add the relevant CA certificate to your servers "trusted
+CA list". How you do this depends on the server software in uses. You can
+print out the servers list of acceptable CAs using the OpenSSL s_client tool:
+
+openssl s_client -connect www.some.host:443 -prexit
+
+If your server only requests certificates on certain URLs then you may need
+to manually issue an HTTP GET command to get the list when s_client connects:
+
+GET /some/page/needing/a/certificate.html
+
+If your CA does not appear in the list then this confirms the problem.
+
+
+* Why does my browser give a warning about a mismatched hostname?
+
+Browsers expect the server's hostname to match the value in the commonName
+(CN) field of the certificate. If it does not then you get a warning.
+
+
+* How do I install a CA certificate into a browser?
+
+The usual way is to send the DER encoded certificate to the browser as
+MIME type application/x-x509-ca-cert, for example by clicking on an appropriate
+link. On MSIE certain extensions such as .der or .cacert may also work, or you
+can import the certificate using the certificate import wizard.
+
+You can convert a certificate to DER form using the command:
+
+openssl x509 -in ca.pem -outform DER -out ca.der
+
+Occasionally someone suggests using a command such as:
+
+openssl pkcs12 -export -out cacert.p12 -in cacert.pem -inkey cakey.pem
+
+DO NOT DO THIS! This command will give away your CAs private key and
+reduces its security to zero: allowing anyone to forge certificates in
+whatever name they choose.
+
+
+[BUILD] =======================================================================
+
 * Why does the linker complain about undefined symbols?
 
 Maybe the compilation was interrupted, and make doesn't notice that
@@ -162,25 +392,197 @@ If none of these helps, you may want to try using the current snapshot.
 If the problem persists, please submit a bug report.
 
 
-* Where can I get a compiled version of OpenSSL?
+* Why does the OpenSSL test fail with "bc: command not found"?
 
-Some applications that use OpenSSL are distributed in binary form.
-When using such an application, you don't need to install OpenSSL
-yourself; the application will include the required parts (e.g. DLLs).
+You didn't install "bc", the Unix calculator.  If you want to run the
+tests, get GNU bc from ftp://ftp.gnu.org or from your OS distributor.
 
-If you want to install OpenSSL on a Windows system and you don't have
-a C compiler, read the "Mingw32" section of INSTALL.W32 for information
-on how to obtain and install the free GNU C compiler.
 
-A number of Linux and *BSD distributions include OpenSSL.
+* Why does the OpenSSL test fail with "bc: 1 no implemented"?
+
+On some SCO installations or versions, bc has a bug that gets triggered
+when you run the test suite (using "make test").  The message returned is
+"bc: 1 not implemented".
+
+The best way to deal with this is to find another implementation of bc
+and compile/install it.  GNU bc (see http://www.gnu.org/software/software.html
+for download instructions) can be safely used, for example.
+
+
+* Why does the OpenSSL test fail with "bc: stack empty"?
+
+On some DG/ux versions, bc seems to have a too small stack for calculations
+that the OpenSSL bntest throws at it.  This gets triggered when you run the
+test suite (using "make test").  The message returned is "bc: stack empty".
+
+The best way to deal with this is to find another implementation of bc
+and compile/install it.  GNU bc (see http://www.gnu.org/software/software.html
+for download instructions) can be safely used, for example.
+
+
+* Why does the OpenSSL compilation fail on Alpha Tru64 Unix?
+
+On some Alpha installations running Tru64 Unix and Compaq C, the compilation
+of crypto/sha/sha_dgst.c fails with the message 'Fatal:  Insufficient virtual
+memory to continue compilation.'  As far as the tests have shown, this may be
+a compiler bug.  What happens is that it eats up a lot of resident memory
+to build something, probably a table.  The problem is clearly in the
+optimization code, because if one eliminates optimization completely (-O0),
+the compilation goes through (and the compiler consumes about 2MB of resident
+memory instead of 240MB or whatever one's limit is currently).
+
+There are three options to solve this problem:
+
+1. set your current data segment size soft limit higher.  Experience shows
+that about 241000 kbytes seems to be enough on an AlphaServer DS10.  You do
+this with the command 'ulimit -Sd nnnnnn', where 'nnnnnn' is the number of
+kbytes to set the limit to.
+
+2. If you have a hard limit that is lower than what you need and you can't
+get it changed, you can compile all of OpenSSL with -O0 as optimization
+level.  This is however not a very nice thing to do for those who expect to
+get the best result from OpenSSL.  A bit more complicated solution is the
+following:
+
+----- snip:start -----
+  make DIRS=crypto SDIRS=sha "`grep '^CFLAG=' Makefile.ssl | \
+       sed -e 's/ -O[0-9] / -O0 /'`"
+  rm `ls crypto/*.o crypto/sha/*.o | grep -v 'sha_dgst\.o'`
+  make
+----- snip:end -----
+
+This will only compile sha_dgst.c with -O0, the rest with the optimization
+level chosen by the configuration process.  When the above is done, do the
+test and installation and you're set.
+
+
+* Why does the OpenSSL compilation fail with "ar: command not found"?
+
+Getting this message is quite usual on Solaris 2, because Sun has hidden
+away 'ar' and other development commands in directories that aren't in
+$PATH by default.  One of those directories is '/usr/ccs/bin'.  The
+quickest way to fix this is to do the following (it assumes you use sh
+or any sh-compatible shell):
+
+----- snip:start -----
+  PATH=${PATH}:/usr/ccs/bin; export PATH
+----- snip:end -----
+
+and then redo the compilation.  What you should really do is make sure
+'/usr/ccs/bin' is permanently in your $PATH, for example through your
+'.profile' (again, assuming you use a sh-compatible shell).
+
+
+* Why does the OpenSSL compilation fail on Win32 with VC++?
+
+Sometimes, you may get reports from VC++ command line (cl) that it
+can't find standard include files like stdio.h and other weirdnesses.
+One possible cause is that the environment isn't correctly set up.
+To solve that problem, one should run VCVARS32.BAT which is found in
+the 'bin' subdirectory of the VC++ installation directory (somewhere
+under 'Program Files').  This needs to be done prior to running NMAKE,
+and the changes are only valid for the current DOS session.
+
+
+* What is special about OpenSSL on Redhat?
+
+Red Hat Linux (release 7.0 and later) include a preinstalled limited
+version of OpenSSL. For patent reasons, support for IDEA, RC5 and MDC2
+is disabled in this version. The same may apply to other Linux distributions.
+Users may therefore wish to install more or all of the features left out.
+
+To do this you MUST ensure that you do not overwrite the openssl that is in
+/usr/bin on your Red Hat machine. Several packages depend on this file,
+including sendmail and ssh. /usr/local/bin is a good alternative choice. The
+libraries that come with Red Hat 7.0 onwards have different names and so are
+not affected. (eg For Red Hat 7.2 they are /lib/libssl.so.0.9.6b and
+/lib/libcrypto.so.0.9.6b with symlinks /lib/libssl.so.2 and
+/lib/libcrypto.so.2 respectively).
+
+Please note that we have been advised by Red Hat attempting to recompile the
+openssl rpm with all the cryptography enabled will not work. All other
+packages depend on the original Red Hat supplied openssl package. It is also
+worth noting that due to the way Red Hat supplies its packages, updates to
+openssl on each distribution never change the package version, only the
+build number. For example, on Red Hat 7.1, the latest openssl package has
+version number 0.9.6 and build number 9 even though it contains all the
+relevant updates in packages up to and including 0.9.6b.
+
+A possible way around this is to persuade Red Hat to produce a non-US
+version of Red Hat Linux.
+
+FYI: Patent numbers and expiry dates of US patents:
+MDC-2: 4,908,861 13/03/2007
+IDEA:  5,214,703 25/05/2010
+RC5:   5,724,428 03/03/2015
+
+
+* Why does the OpenSSL test suite fail on MacOS X?
+
+If the failure happens when running 'make test' and the RC4 test fails,
+it's very probable that you have OpenSSL 0.9.6b delivered with the
+operating system (you can find out by running '/usr/bin/openssl version')
+and that you were trying to build OpenSSL 0.9.6d.  The problem is that
+the loader ('ld') in MacOS X has a misfeature that's quite difficult to
+go around and has linked the programs "openssl" and the test programs
+with /usr/lib/libcrypto.dylib and /usr/lib/libssl.dylib instead of the
+libraries you just built.
+Look in the file PROBLEMS for a more detailed explanation and for possible
+solutions.
+
+[PROG] ========================================================================
+
+* Is OpenSSL thread-safe?
+
+Yes (with limitations: an SSL connection may not concurrently be used
+by multiple threads).  On Windows and many Unix systems, OpenSSL
+automatically uses the multi-threaded versions of the standard
+libraries.  If your platform is not one of these, consult the INSTALL
+file.
+
+Multi-threaded applications must provide two callback functions to
+OpenSSL.  This is described in the threads(3) manpage.
 
 
 * I've compiled a program under Windows and it crashes: why?
 
-This is usually because you've missed the comment in INSTALL.W32. You
-must link with the multithreaded DLL version of the VC++ runtime library
-otherwise the conflict will cause a program to crash: typically on the
-first BIO related read or write operation.
+This is usually because you've missed the comment in INSTALL.W32.
+Your application must link against the same version of the Win32
+C-Runtime against which your openssl libraries were linked.  The
+default version for OpenSSL is /MD - "Multithreaded DLL".
+
+If you are using Microsoft Visual C++'s IDE (Visual Studio), in
+many cases, your new project most likely defaulted to "Debug
+Singlethreaded" - /ML.  This is NOT interchangeable with /MD and your
+program will crash, typically on the first BIO related read or write
+operation.
+
+For each of the six possible link stage configurations within Win32,
+your application must link  against the same by which OpenSSL was
+built.  If you are using MS Visual C++ (Studio) this can be changed
+by:
+
+1.  Select Settings... from the Project Menu.
+2.  Select the C/C++ Tab.
+3.  Select "Code Generation from the "Category" drop down list box
+4.  Select the Appropriate library (see table below) from the "Use
+    run-time library" drop down list box.  Perform this step for both
+    your debug and release versions of your application (look at the
+    top left of the settings panel to change between the two)
+
+    Single Threaded           /ML        -  MS VC++ often defaults to
+                                            this for the release
+                                            version of a new project.
+    Debug Single Threaded     /MLd       -  MS VC++ often defaults to
+                                            this for the debug version
+                                            of a new project.
+    Multithreaded             /MT
+    Debug Multithreaded       /MTd
+    Multithreaded DLL         /MD        -  OpenSSL defaults to this.
+    Debug Multithreaded DLL   /MDd
+
+Note that debug and release libraries are NOT interchangeable.  If you
+built OpenSSL with /MD your application must use /MD and cannot use /MDd.
 
 
 * How do I read or write a DER encoded buffer using the ASN1 functions?
@@ -259,174 +661,39 @@ is forgetting to load OpenSSL's table of algorithms with
 OpenSSL_add_all_algorithms(). See the manual page for more information.
 
 
-* How do I create certificates or certificate requests?
-
-Check out the CA.pl(1) manual page. This provides a simple wrapper round
-the 'req', 'verify', 'ca' and 'pkcs12' utilities. For finer control check
-out the manual pages for the individual utilities and the certificate
-extensions documentation (currently in doc/openssl.txt).
-
-
-* Why can't I create certificate requests?
-
-You typically get the error:
-
-	unable to find 'distinguished_name' in config
-	problems making Certificate Request
-
-This is because it can't find the configuration file. Check out the
-DIAGNOSTICS section of req(1) for more information.
-
-
-* Why does <SSL program> fail with a certificate verify error?
-
-This problem is usually indicated by log messages saying something like
-"unable to get local issuer certificate" or "self signed certificate".
-When a certificate is verified its root CA must be "trusted" by OpenSSL
-this typically means that the CA certificate must be placed in a directory
-or file and the relevant program configured to read it. The OpenSSL program
-'verify' behaves in a similar way and issues similar error messages: check
-the verify(1) program manual page for more information.
-
-
-* Why can I only use weak ciphers when I connect to a server using OpenSSL?
-
-This is almost certainly because you are using an old "export grade" browser
-which only supports weak encryption. Upgrade your browser to support 128 bit
-ciphers.
-
-
-* How can I create DSA certificates?
-
-Check the CA.pl(1) manual page for a DSA certificate example.
-
-
-* Why can't I make an SSL connection to a server using a DSA certificate?
-
-Typically you'll see a message saying there are no shared ciphers when
-the same setup works fine with an RSA certificate. There are two possible
-causes. The client may not support connections to DSA servers most web
-browsers (including Netscape and MSIE) only support connections to servers
-supporting RSA cipher suites. The other cause is that a set of DH parameters
-has not been supplied to the server. DH parameters can be created with the
-dhparam(1) command and loaded using the SSL_CTX_set_tmp_dh() for example:
-check the source to s_server in apps/s_server.c for an example.
-
-
-* How can I remove the passphrase on a private key?
-
-Firstly you should be really *really* sure you want to do this. Leaving
-a private key unencrypted is a major security risk. If you decide that
-you do have to do this check the EXAMPLES sections of the rsa(1) and
-dsa(1) manual pages.
-
-
 * Why can't the OpenSSH configure script detect OpenSSL?
 
-There is a problem with OpenSSH 1.2.2p1, in that the configure script
-can't find the installed OpenSSL libraries.  The problem is actually
-a small glitch that is easily solved with the following patch to be
-applied to the OpenSSH distribution:
+Several reasons for problems with the automatic detection exist.
+OpenSSH requires at least version 0.9.5a of the OpenSSL libraries.
+Sometimes the distribution has installed an older version in the system
+locations that is detected instead of a new one installed. The OpenSSL
+library might have been compiled for another CPU or another mode (32/64 bits).
+Permissions might be wrong.
 
------ snip:start -----
---- openssh-1.2.2p1/configure.in.orig	Thu Mar 23 18:56:58 2000
-+++ openssh-1.2.2p1/configure.in	Thu Mar 23 18:55:05 2000
-@@ -152,10 +152,10 @@
- AC_MSG_CHECKING([for OpenSSL/SSLeay directory])
- for ssldir in "" $tryssldir /usr /usr/local/openssl /usr/lib/openssl /usr/local/ssl /usr/lib/ssl /usr/local /usr/pkg /opt /opt/openssl ; do
- 	if test ! -z "$ssldir" ; then
--		LIBS="$saved_LIBS -L$ssldir"
-+		LIBS="$saved_LIBS -L$ssldir/lib"
- 		CFLAGS="$CFLAGS -I$ssldir/include"
- 		if test "x$need_dash_r" = "x1" ; then
--			LIBS="$LIBS -R$ssldir"
-+			LIBS="$LIBS -R$ssldir/lib"
- 		fi
- 	fi
- 	LIBS="$LIBS -lcrypto"
---- openssh-1.2.2p1/configure.orig	Thu Mar 23 18:55:02 2000
-+++ openssh-1.2.2p1/configure	Thu Mar 23 18:57:08 2000
-@@ -1890,10 +1890,10 @@
- echo "configure:1891: checking for OpenSSL/SSLeay directory" >&5
- for ssldir in "" $tryssldir /usr /usr/local/openssl /usr/lib/openssl /usr/local/ssl /usr/lib/ssl /usr/local /usr/pkg /opt /opt/openssl ; do
- 	if test ! -z "$ssldir" ; then
--		LIBS="$saved_LIBS -L$ssldir"
-+		LIBS="$saved_LIBS -L$ssldir/lib"
- 		CFLAGS="$CFLAGS -I$ssldir/include"
- 		if test "x$need_dash_r" = "x1" ; then
--			LIBS="$LIBS -R$ssldir"
-+			LIBS="$LIBS -R$ssldir/lib"
- 		fi
- 	fi
- 	LIBS="$LIBS -lcrypto"
------ snip:end -----
+The general answer is to check the config.log file generated when running
+the OpenSSH configure script. It should contain the detailed information
+on why the OpenSSL library was not detected or considered incompatible.
+
+* Can I use OpenSSL's SSL library with non-blocking I/O?
+
+Yes; make sure to read the SSL_get_error(3) manual page!
+
+A pitfall to avoid: Don't assume that SSL_read() will just read from
+the underlying transport or that SSL_write() will just write to it --
+it is also possible that SSL_write() cannot do any useful work until
+there is data to read, or that SSL_read() cannot do anything until it
+is possible to send data.  One reason for this is that the peer may
+request a new TLS/SSL handshake at any time during the protocol,
+requiring a bi-directional message exchange; both SSL_read() and
+SSL_write() will try to continue any pending handshake.
 
 
-* Why does the OpenSSL test fail with "bc: command not found"?
+* Why doesn't my server application receive a client certificate?
 
-You didn't install "bc", the Unix calculator.  If you want to run the
-tests, get GNU bc from ftp://ftp.gnu.org or from your OS distributor.
+Due to the TLS protocol definition, a client will only send a certificate,
+if explicitly asked by the server. Use the SSL_VERIFY_PEER flag of the
+SSL_CTX_set_verify() function to enable the use of client certificates.
 
 
-* Why does the OpenSSL test fail with "bc: 1 no implemented"?
-
-On some SCO installations or versions, bc has a bug that gets triggered when
-you run the test suite (using "make test").  The message returned is "bc:
-1 not implemented".  The best way to deal with this is to find another
-implementation of bc and compile/install it.  For example, GNU bc (see
-http://www.gnu.org/software/software.html for download instructions) can
-be safely used.
-
-
-* Why does the OpenSSL compilation fail on Alpha True64 Unix?
-
-On some Alpha installations running True64 Unix and Compaq C, the compilation
-of crypto/sha/sha_dgst.c fails with the message 'Fatal:  Insufficient virtual
-memory to continue compilation.'  As far as the tests have shown, this may be
-a compiler bug.  What happens is that it eats up a lot of resident memory
-to build something, probably a table.  The problem is clearly in the
-optimization code, because if one eliminates optimization completely (-O0),
-the compilation goes through (and the compiler consumes about 2MB of resident
-memory instead of 240MB or whatever one's limit is currently).
-
-There are three options to solve this problem:
-
-1. set your current data segment size soft limit higher.  Experience shows
-that about 241000 kbytes seems to be enough on an AlphaServer DS10.  You do
-this with the command 'ulimit -Sd nnnnnn', where 'nnnnnn' is the number of
-kbytes to set the limit to.
-
-2. If you have a hard limit that is lower than what you need and you can't
-get it changed, you can compile all of OpenSSL with -O0 as optimization
-level.  This is however not a very nice thing to do for those who expect to
-get the best result from OpenSSL.  A bit more complicated solution is the
-following:
-
------ snip:start -----
-  make DIRS=crypto SDIRS=sha "`grep '^CFLAG=' Makefile.ssl | \
-       sed -e 's/ -O[0-9] / -O0 /'`"
-  rm `ls crypto/*.o crypto/sha/*.o | grep -v 'sha_dgst\.o'`
-  make
------ snip:end -----
-
-This will only compile sha_dgst.c with -O0, the rest with the optimization
-level chosen by the configuration process.  When the above is done, do the
-test and installation and you're set.
-
-
-* Why does the OpenSSL compilation fail with "ar: command not found"?
-
-Getting this message is quite usual on Solaris 2, because Sun has hidden
-away 'ar' and other development commands in directories that aren't in
-$PATH by default.  One of those directories is '/usr/ccs/bin'.  The
-quickest way to fix this is to do the following (it assumes you use sh
-or any sh-compatible shell):
-
------ snip:start -----
-  PATH=${PATH}:/usr/ccs/bin; export PATH
------ snip:end -----
-
-and then redo the compilation.  What you should really do is make sure
-'/usr/ccs/bin' is permanently in your $PATH, for example through your
-'.profile' (again, assuming you use a sh-compatible shell).
+===============================================================================
 

INSTALL

@@ -7,8 +7,11 @@
 
  To install OpenSSL, you will need:
 
+  * make
   * Perl 5
   * an ANSI C compiler
+  * a development environment in form of development libraries and C
+    header files
   * a supported Unix operating system
 
  Quick Start
@@ -43,9 +46,6 @@
   --openssldir=DIR Directory for OpenSSL files. If no prefix is specified,
                 the library files and binaries are also installed there.
 
-  rsaref        Build with RSADSI's RSAREF toolkit (this assumes that
-                librsaref.a is in the library search path).
-
   no-threads    Don't try to build with support for multi-threaded
                 applications.
 
@@ -125,11 +125,14 @@
      directory, and the binary will be in the "apps" directory.
 
      If "make" fails, look at the output.  There may be reasons for
-     the failure that isn't a problem in OpenSSL itself (like missing
+     the failure that aren't problems in OpenSSL itself (like missing
      standard headers).  If it is a problem with OpenSSL itself, please
      report the problem to <openssl-bugs@openssl.org> (note that your
-     message will be forwarded to a public mailing list).  Include the
-     output of "make report" in your message.
+     message will be recorded in the request tracker publicly readable
+     via http://www.openssl.org/rt2.html and will be forwarded to a public
+     mailing list). Include the output of "make report" in your message.
+     Please check out the request tracker. Maybe the bug was already
+     reported or has already been fixed.
 
      [If you encounter assembler error messages, try the "no-asm"
      configuration option as an immediate fix.]
@@ -147,7 +150,8 @@
      try removing any compiler optimization flags from the CFLAGS line
      in Makefile.ssl and run "make clean; make". Please send a bug
      report to <openssl-bugs@openssl.org>, including the output of
-     "make report".
+     "make report" in order to be added to the request tracker at
+     http://www.openssl.org/rt2.html.
 
   4. If everything tests ok, install OpenSSL with
 
@@ -269,6 +273,11 @@
  Note on shared libraries
  ------------------------
 
+ Shared library is currently an experimental feature.  The only reason to
+ have them would be to conserve memory on systems where several program
+ are using OpenSSL.  Binary backward compatibility can't be guaranteed
+ before OpenSSL version 1.0.
+
  For some systems, the OpenSSL Configure script knows what is needed to
  build shared libraries for libcrypto and libssl.  On these systems,
  the shared libraries are currently not created by default, but giving
@@ -276,3 +285,15 @@
  targets for shared library creation, like linux-shared.  Those targets
  can currently be used on their own just as well, but this is expected
  to change in future versions of OpenSSL.
+
+ Note on random number generation
+ --------------------------------
+
+ Availability of cryptographically secure random numbers is required for
+ secret key generation. OpenSSL provides several options to seed the
+ internal PRNG. If not properly seeded, the internal PRNG will refuse
+ to deliver random bytes and a "PRNG not seeded error" will occur.
+ On systems without /dev/urandom (or similar) device, it may be necessary
+ to install additional support software to obtain random seed.
+ Please check out the manual pages for RAND_add(), RAND_bytes(), RAND_egd(),
+ and the FAQ for more information.

INSTALL.MacOS

@@ -1,7 +1,7 @@
-OpenSSL - Port To The Macintosh
-===============================
+OpenSSL - Port To The Macintosh OS 9 or Earlier
+===============================================
 
-Thanks to Roy Wood <roy@centricsystems.ca> initial support for MacOS (pre
+Thanks to Roy Wood <roy@centricsystems.ca> initial support for Mac OS (pre
 X) is now provided. "Initial" means that unlike other platforms where you
 get an SDK and a "swiss army" openssl application, on Macintosh you only
 get one sample application which fetches a page over HTTPS(*) and dumps it
@@ -42,7 +42,7 @@ Installation procedure:
 	BSD sockets and some other POSIX APIs. The GUSI distribution is
 	expected to be found in the same directory as openssl source tree,
 	i.e. in the parent directory to the one where this very file,
-	namely INSTALL.MacOS. For more informations about GUSI, see
+	namely INSTALL.MacOS. For more information about GUSI, see
 	http://www.iis.ee.ethz.ch/~neeri/macintosh/gusi-qa.html
 
 Finally some essential comments from our generous contributor:-)

INSTALL.VMS

@@ -8,6 +8,7 @@ Intro:
 
 This file is divided in the following parts:
 
+  Requirements			- Mandatory reading.
   Checking the distribution	- Mandatory reading.
   Compilation			- Mandatory reading.
   Logical names			- Mandatory reading.
@@ -19,6 +20,15 @@ This file is divided in the following parts:
   TODO				- Things that are to come.
 
 
+Requirements:
+=============
+
+To build and install OpenSSL, you will need:
+
+ * DEC C or some other ANSI C compiler.  VAX C is *not* supported.
+   [Note: OpenSSL has only been tested with DEC C.  Compiling with 
+    a different ANSI C compiler may require some work]
+
 Checking the distribution:
 ==========================
 

INSTALL.W32

@@ -2,16 +2,19 @@
  INSTALLATION ON THE WIN32 PLATFORM
  ----------------------------------
 
- Heres a few comments about building OpenSSL in Windows environments. Most of
- this is tested on Win32 but it may also work in Win 3.1 with some
+ Heres a few comments about building OpenSSL in Windows environments.  Most
+ of this is tested on Win32 but it may also work in Win 3.1 with some
  modification.
 
- You need Perl for Win32 (available from http://www.activestate.com/ActivePerl)
+ You need Perl for Win32.  Unless you will build on Cygwin, you will need
+ ActiveState Perl, available from http://www.activestate.com/ActivePerl.
+ For Cygwin users, there's more info in the Cygwin section.
+
  and one of the following C compilers:
 
   * Visual C++
   * Borland C
-  * GNU C (Mingw32 or Cygwin32)
+  * GNU C (Mingw32 or Cygwin)
 
  If you want to compile in the assembly language routines with Visual C++ then
  you will need an assembler. This is worth doing because it will result in
@@ -78,8 +81,9 @@
 
  There are various changes you can make to the Win32 compile environment. By
  default the library is not compiled with debugging symbols. If you add 'debug'
- to the mk1mk.pl lines in the do_* batch file then debugging symbols will be
- compiled in.
+ to the mk1mf.pl lines in the do_* batch file then debugging symbols will be
+ compiled in. Note that mk1mf.pl expects the platform to be the last argument
+ on the command line, so 'debug' must appear before that, as all other options.
 
  The default Win32 environment is to leave out any Windows NT specific
  features.
@@ -91,6 +95,18 @@
  You can also build a static version of the library using the Makefile
  ms\nt.mak
 
+ Borland C++ builder 5
+ ---------------------
+
+ * Configure for building with Borland Builder:
+   > perl Configure BC-32
+
+ * Create the appropriate makefile
+   > ms\do_nasm
+
+ * Build
+   > make -f ms\bcb.mak
+
  Borland C++ builder 3 and 4
  ---------------------------
 
@@ -134,28 +150,30 @@
    > cd out
    > ..\ms\test
 
- GNU C (CygWin32)
- ---------------
+ GNU C (Cygwin)
+ --------------
 
- CygWin32 provides a bash shell and GNU tools environment running on
+ Cygwin provides a bash shell and GNU tools environment running on
  NT 4.0, Windows 9x and Windows 2000. Consequently, a make of OpenSSL
- with CygWin is closer to a GNU bash environment such as Linux rather
+ with Cygwin is closer to a GNU bash environment such as Linux rather
  than other W32 makes that are based on a single makefile approach.
- CygWin32 implements Posix/Unix calls through cygwin1.dll, and is
+ Cygwin implements Posix/Unix calls through cygwin1.dll, and is
  contrasted to Mingw32 which links dynamically to msvcrt.dll or
  crtdll.dll.
 
- To build OpenSSL using CygWin32:
+ To build OpenSSL using Cygwin:
 
- * Install CygWin32 (see http://sourceware.cygnus.com/cygwin)
+ * Install Cygwin (see http://sourceware.cygnus.com/cygwin)
 
- * Install Perl and ensure it is in the path
+ * Install Perl and ensure it is in the path (recent Cygwin perl 
+   (version 5.6.1-2 of the latter has been reported to work) or
+   ActivePerl)
 
- * Run the CygWin bash shell
+ * Run the Cygwin bash shell
 
  * $ tar zxvf openssl-x.x.x.tar.gz
    $ cd openssl-x.x.x
-   $ ./Configure no-threads CygWin32
+   $ ./config
    [...]
    $ make
    [...]
@@ -164,27 +182,28 @@
 
  This will create a default install in /usr/local/ssl.
 
- CygWin32 Notes:
+ Cygwin Notes:
 
  "make test" and normal file operations may fail in directories
- mounted as text (i.e. mount -t c:\somewhere /home) due to CygWin
+ mounted as text (i.e. mount -t c:\somewhere /home) due to Cygwin
  stripping of carriage returns. To avoid this ensure that a binary
  mount is used, e.g. mount -b c:\somewhere /home.
 
- As of version 1.1.1 CygWin32 is relatively unstable in its handling
+ As of version 1.1.1 Cygwin is relatively unstable in its handling
  of cr/lf issues. These make procedures succeeded with versions 1.1 and
  the snapshot 20000524 (Slow!).
 
- "bc" is not provided in the CygWin32 distribution.  This causes a
+ "bc" is not provided in the Cygwin distribution.  This causes a
  non-fatal error in "make test" but is otherwise harmless.  If
- desired, GNU bc can be built with CygWin32 without change.
+ desired, GNU bc can be built with Cygwin without change.
 
 
  Installation
  ------------
 
- There's currently no real installation procedure for Win32.  There are,
- however, some suggestions:
+ If you used the Cygwin procedure above, you have already installed and
+ can skip this section.  For all other procedures, there's currently no real
+ installation procedure for Win32.  There are, however, some suggestions:
 
     - do nothing.  The include files are found in the inc32/ subdirectory,
       all binaries are found in out32dll/ or out32/ depending if you built

LICENSE

@@ -12,7 +12,7 @@
   ---------------
 
 /* ====================================================================
- * Copyright (c) 1998-2000 The OpenSSL Project.  All rights reserved.
+ * Copyright (c) 1998-2002 The OpenSSL Project.  All rights reserved.
  *
  * Redistribution and use in source and binary forms, with or without
  * modification, are permitted provided that the following conditions

MacOS/GetHTTPS.src/MacSocket.cpp

@@ -1287,7 +1287,7 @@ EXITPOINT:
 
 //	Send some bytes
 
-int MacSocket_send(const int inSocketNum,void *inBuff,int inBuffLength)
+int MacSocket_send(const int inSocketNum,const void *inBuff,int inBuffLength)
 {
 OSErr			errCode = noErr;
 int				bytesSent = 0;
@@ -1604,4 +1604,4 @@ EPInfo* epi = (EPInfo*) context;
 		}
 	}
 }
-*/
+*/

MacOS/GetHTTPS.src/MacSocket.h

@@ -62,7 +62,7 @@ int MacSocket_recv(const int inSocketNum,void *outBuff,int outBuffLength,const B
 
 //	Call this to send data on a socket
 
-int MacSocket_send(const int inSocketNum,void *inBuff,int inBuffLength);
+int MacSocket_send(const int inSocketNum,const void *inBuff,int inBuffLength);
 
 
 //	If zero bytes were read in a call to MacSocket_recv(), it may be that the remote end has done a half-close

Makefile.org

@@ -9,6 +9,7 @@ SHLIB_VERSION_NUMBER=
 SHLIB_VERSION_HISTORY=
 SHLIB_MAJOR=
 SHLIB_MINOR=
+SHLIB_EXT=
 PLATFORM=dist
 OPTIONS=
 CONFIGURE_ARGS=
@@ -56,8 +57,9 @@ CC= gcc
 #CFLAG= -DL_ENDIAN -DTERMIO -O3 -fomit-frame-pointer -m486 -Wall -Wuninitialized -DSHA1_ASM -DMD5_ASM -DRMD160_ASM
 CFLAG= -DTERMIOS -DL_ENDIAN -fomit-frame-pointer -O3 -m486 -Wall -DSHA1_ASM -DMD5_ASM -DRMD160_ASM
 DEPFLAG= 
-PEX_LIBS= -L. -L.. -L../.. -L../../..
+PEX_LIBS= 
 EX_LIBS= 
+EXE_EXT= 
 AR=ar r
 RANLIB= ranlib
 PERL= perl
@@ -149,14 +151,11 @@ RMD160_ASM_OBJ= asm/rm86-out.o
 #RMD160_ASM_OBJ= asm/rm86-out.o       # a.out, FreeBSD
 #RMD160_ASM_OBJ= asm/rm86bsdi.o       # bsdi
 
-# To do special treatment, use "directory names" starting with a period.
 # When we're prepared to use shared libraries in the programs we link here
-# we might have SHLIB_MARK1 get the value ".shlib." and SHLIB_MARK2 be empty,
-# or have that configurable.
-SHLIB_MARK1=.shlib-clean.
-SHLIB_MARK2=.shlib.
+# we might set SHLIB_MARK to '$(SHARED_LIBS)'.
+SHLIB_MARK=
 
-DIRS=   crypto ssl rsaref $(SHLIB_MARK1) apps test tools $(SHLIB_MARK2)
+DIRS=   crypto ssl rsaref $(SHLIB_MARK) apps test tools
 SHLIBDIRS= crypto ssl
 
 # dirs in crypto to build
@@ -180,7 +179,11 @@ ONEDIRS=out tmp
 EDIRS=  times doc bugs util include certs ms shlib mt demos perl sf dep VMS
 WDIRS=  windows
 LIBS=   libcrypto.a libssl.a
-SHARED_LIBS=libcrypto.so libssl.so
+SHARED_CRYPTO=libcrypto$(SHLIB_EXT)
+SHARED_SSL=libssl$(SHLIB_EXT)
+SHARED_LIBS=
+SHARED_LIBS_LINK_EXTS=
+SHARED_LDFLAGS=
 
 GENERAL=        Makefile
 BASENAME=       openssl
@@ -190,108 +193,288 @@ WTARFILE=       $(NAME)-win.tar
 EXHEADER=       e_os.h e_os2.h
 HEADER=         e_os.h
 
-all: Makefile.ssl
-	@need_shlib=true; \
-	for i in $(DIRS) ;\
-	do \
-	if [ "$$i" = ".shlib-clean." ]; then \
-		if [ "$(SHLIB_TARGET)" != "" ]; then \
-			$(MAKE) clean-shared; \
-		fi; \
-	elif [ "$$i" = ".shlib." ]; then \
-		if [ "$(SHLIB_TARGET)" != "" ]; then \
-			$(MAKE) $(SHARED_LIBS); \
-		fi; \
-		need_shlib=false; \
-	else \
-		(cd $$i && echo "making all in $$i..." && \
-		$(MAKE) CC='${CC}' PLATFORM='${PLATFORM}' CFLAG='${CFLAG}' INSTALLTOP='${INSTALLTOP}' PEX_LIBS='${PEX_LIBS}' EX_LIBS='${EX_LIBS}' BN_ASM='${BN_ASM}' DES_ENC='${DES_ENC}' BF_ENC='${BF_ENC}' CAST_ENC='${CAST_ENC}' RC4_ENC='${RC4_ENC}' RC5_ENC='${RC5_ENC}' SHA1_ASM_OBJ='${SHA1_ASM_OBJ}' MD5_ASM_OBJ='${MD5_ASM_OBJ}' RMD160_ASM_OBJ='${RMD160_ASM_OBJ}' SDIRS='${SDIRS}' AR='${AR}' PROCESSOR='${PROCESSOR}' PERL='${PERL}' RANLIB='${RANLIB}' all ) || exit 1; \
-	fi; \
-	done; \
-	if $$need_shlib && [ "$(SHLIB_MARK1)" != "" -o "$(SHLIB_MARK1)" != "" ]; then \
-		$(MAKE) $(SHARED_LIBS); \
-	fi
+# When we're prepared to use shared libraries in the programs we link here
+# we might remove 'clean-shared' from the targets to perform at this stage
+
+all: clean-shared Makefile.ssl sub_all
 
 sub_all:
-	@need_shlib=true; \
-	for i in $(DIRS) ;\
+	@for i in $(DIRS); \
 	do \
-	if [ "$$i" = ".shlib-clean." ]; then \
-		if [ "$(SHLIB_TARGET)" != "" ]; then \
-			$(MAKE) clean-shared; \
-		fi; \
-	elif [ "$$i" = ".shlib." ]; then \
-		if [ "$(SHLIB_TARGET)" != "" ]; then \
-			$(MAKE) $(SHARED_LIBS); \
-		fi; \
-		need_shlib=false; \
-	else \
+	if [ -d "$$i" ]; then \
 		(cd $$i && echo "making all in $$i..." && \
-		$(MAKE) CC='${CC}' PLATFORM='${PLATFORM}' CFLAG='${CFLAG}' SDIRS='$(SDIRS)' INSTALLTOP='${INSTALLTOP}' PEX_LIBS='${PEX_LIBS}' EX_LIBS='${EX_LIBS}' BN_ASM='${BN_ASM}' DES_ENC='${DES_ENC}' BF_ENC='${BF_ENC}' CAST_ENC='${CAST_ENC}' RC4_ENC='${RC4_ENC}' RC5_ENC='${RC5_ENC}' SHA1_ASM_OBJ='${SHA1_ASM_OBJ}' MD5_ASM_OBJ='${MD5_ASM_OBJ}' RMD160_ASM_OBJ='${RMD160_ASM_OBJ}' AR='${AR}' PROCESSOR='${PROCESSOR}' PERL='${PERL}' RANLIB='${RANLIB}' all ) || exit 1; \
+		$(MAKE) CC='${CC}' PLATFORM='${PLATFORM}' CFLAG='${CFLAG}' SDIRS='$(SDIRS)' INSTALLTOP='${INSTALLTOP}' PEX_LIBS='${PEX_LIBS}' EX_LIBS='${EX_LIBS}' BN_ASM='${BN_ASM}' DES_ENC='${DES_ENC}' BF_ENC='${BF_ENC}' CAST_ENC='${CAST_ENC}' RC4_ENC='${RC4_ENC}' RC5_ENC='${RC5_ENC}' SHA1_ASM_OBJ='${SHA1_ASM_OBJ}' MD5_ASM_OBJ='${MD5_ASM_OBJ}' RMD160_ASM_OBJ='${RMD160_ASM_OBJ}' AR='${AR}' PROCESSOR='${PROCESSOR}' PERL='${PERL}' RANLIB='${RANLIB}' EXE_EXT='${EXE_EXT}' all ) || exit 1; \
+	else \
+		$(MAKE) $$i; \
 	fi; \
 	done; \
-	if $$need_shlib && [ "$(SHLIB_MARK1)" != "" -o "$(SHLIB_MARK1)" != "" ]; then \
+	if echo "$(DIRS)" | \
+	    egrep '(^| )(crypto|ssl)( |$$)' > /dev/null 2>&1 && \
+	   [ -n "$(SHARED_LIBS)" ]; then \
 		$(MAKE) $(SHARED_LIBS); \
 	fi
 
-libcrypto.so: libcrypto.a
+libcrypto$(SHLIB_EXT): libcrypto.a
 	@if [ "$(SHLIB_TARGET)" != "" ]; then \
-		$(MAKE) SHLIBDIRS=crypto $(SHLIB_TARGET); \
+		$(MAKE) SHLIBDIRS=crypto build-shared; \
 	else \
 		echo "There's no support for shared libraries on this platform" >&2; \
 	fi
-libssl.so: libcrypto.so libssl.a
+libssl$(SHLIB_EXT): libcrypto$(SHLIB_EXT) libssl.a
 	@if [ "$(SHLIB_TARGET)" != "" ]; then \
-		$(MAKE) SHLIBDIRS=ssl SHLIBDEPS='-L. -lcrypto' $(SHLIB_TARGET); \
+		$(MAKE) SHLIBDIRS=ssl SHLIBDEPS='-lcrypto' build-shared; \
 	else \
 		echo "There's no support for shared libraries on this platform" >&2; \
 	fi
 
 clean-shared:
-	for i in ${SHLIBDIRS}; do \
-	rm -f lib$$i.so \
-		lib$$i.so.${SHLIB_MAJOR} \
-		lib$$i.so.${SHLIB_MAJOR}.${SHLIB_MINOR}; \
+	@for i in $(SHLIBDIRS); do \
+		if [ -n "$(SHARED_LIBS_LINK_EXTS)" ]; then \
+			tmp="$(SHARED_LIBS_LINK_EXTS)"; \
+			for j in $${tmp:-x}; do \
+				( set -x; rm -f lib$$i$$j ); \
+			done; \
+		fi; \
+		( set -x; rm -f lib$$i$(SHLIB_EXT) ); \
+		if [ "$(PLATFORM)" = "Cygwin" ]; then \
+			( set -x; rm -f cyg$$i$(SHLIB_EXT) lib$$i$(SHLIB_EXT).a ); \
+		fi; \
 	done
 
-linux-shared:
-	libs='${SHLIBDEPS}'; for i in ${SHLIBDIRS}; do \
-	rm -f lib$$i.so \
-		lib$$i.so.${SHLIB_MAJOR} \
-		lib$$i.so.${SHLIB_MAJOR}.${SHLIB_MINOR}; \
-	( set -x; ${CC}  -shared -o lib$$i.so.${SHLIB_MAJOR}.${SHLIB_MINOR} \
-		-Wl,-S,-soname=lib$$i.so.${SHLIB_MAJOR} \
+link-shared:
+	@if [ -n "$(SHARED_LIBS_LINK_EXTS)" ]; then \
+		tmp="$(SHARED_LIBS_LINK_EXTS)"; \
+		for i in $(SHLIBDIRS); do \
+			prev=lib$$i$(SHLIB_EXT); \
+			for j in $${tmp:-x}; do \
+				( set -x; \
+				rm -f lib$$i$$j; ln -s $$prev lib$$i$$j ); \
+				prev=lib$$i$$j; \
+			done; \
+		done; \
+	fi
+
+build-shared: clean-shared do_$(SHLIB_TARGET) link-shared
+
+do_bsd-gcc-shared: do_gnu-shared
+do_linux-shared: do_gnu-shared
+do_gnu-shared:
+	libs='-L. ${SHLIBDEPS}'; for i in ${SHLIBDIRS}; do \
+	( set -x; ${CC} ${SHARED_LDFLAGS} \
+		-shared -o lib$$i.so.${SHLIB_MAJOR}.${SHLIB_MINOR} \
+		-Wl,-soname=lib$$i.so.${SHLIB_MAJOR}.${SHLIB_MINOR} \
+		-Wl,-Bsymbolic \
 		-Wl,--whole-archive lib$$i.a \
 		-Wl,--no-whole-archive $$libs ${EX_LIBS} -lc ) || exit 1; \
+	libs="$$libs -l$$i"; \
+	done
+
+DETECT_GNU_LD=${CC} -v 2>&1 | grep '^gcc' >/dev/null 2>&1 && \
+	my_ld=`${CC} -print-prog-name=ld 2>&1` && \
+	[ -n "$$my_ld" ] && \
+	$$my_ld -v 2>&1 | grep 'GNU ld' >/dev/null 2>&1
+
+# For Darwin AKA Mac OS/X (dyld)
+do_darwin-shared: 
+	libs='-L. ${SHLIBDEPS}'; for i in ${SHLIBDIRS}; do \
+	( set -x ; ${CC} --verbose -dynamiclib -o lib$$i${SHLIB_EXT} \
+		lib$$i.a $$libs -all_load -current_version ${SHLIB_MAJOR}.${SHLIB_MINOR} \
+		-compatibility_version ${SHLIB_MAJOR}.`echo ${SHLIB_MINOR} | cut -d. -f1` \
+		-install_name ${INSTALLTOP}/lib/lib$$i${SHLIB_EXT} ) || exit 1; \
+	libs="$$libs -l`basename $$i${SHLIB_EXT} .dylib`"; \
+	echo "" ; \
+	done
+
+do_cygwin-shared:
+	libs='-L. ${SHLIBDEPS}'; for i in ${SHLIBDIRS}; do \
+	( set -x; ${CC}  -shared -o cyg$$i.dll \
+		-Wl,-Bsymbolic \
+		-Wl,--whole-archive lib$$i.a \
+		-Wl,--out-implib,lib$$i.dll.a \
+		-Wl,--no-whole-archive $$libs ) || exit 1; \
+	libs="$$libs -l$$i"; \
+	done
+
+# This assumes that GNU utilities are *not* used
+do_alpha-osf1-shared:
+	if ${DETECT_GNU_LD}; then \
+		$(MAKE) do_gnu-shared; \
+	else \
+		libs='-L. ${SHLIBDEPS}'; for i in ${SHLIBDIRS}; do \
+		( set -x; ${CC} ${SHARED_LDFLAGS} \
+			-shared -o lib$$i.so \
+			-set_version "${SHLIB_VERSION_HISTORY}${SHLIB_VERSION_NUMBER}" \
+			-all lib$$i.a -none $$libs ${EX_LIBS} -lc ) || exit 1; \
+		libs="$$libs -l$$i"; \
+		done; \
+	fi
+
+# This assumes that GNU utilities are *not* used
+# The difference between alpha-osf1-shared and tru64-shared is the `-msym'
+# option passed to the linker.
+do_tru64-shared:
+	if ${DETECT_GNU_LD}; then \
+		$(MAKE) do_gnu-shared; \
+	else \
+		libs='-L. ${SHLIBDEPS}'; for i in ${SHLIBDIRS}; do \
+		( set -x; ${CC} ${SHARED_LDFLAGS} \
+			-shared -msym -o lib$$i.so \
+			-set_version "${SHLIB_VERSION_HISTORY}${SHLIB_VERSION_NUMBER}" \
+			-all lib$$i.a -none $$libs ${EX_LIBS} -lc ) || exit 1; \
+		libs="$$libs -l$$i"; \
+		done; \
+	fi
+
+# This assumes that GNU utilities are *not* used
+# The difference between tru64-shared and tru64-shared-rpath is the
+# -rpath ${INSTALLTOP}/lib passed to the linker.
+do_tru64-shared-rpath:
+	if ${DETECT_GNU_LD}; then \
+		$(MAKE) do_gnu-shared; \
+	else \
+		libs='-L. ${SHLIBDEPS}'; for i in ${SHLIBDIRS}; do \
+		( set -x; ${CC} ${SHARED_LDFLAGS} \
+			-shared -msym -o lib$$i.so \
+			-rpath  ${INSTALLTOP}/lib \
+			-set_version "${SHLIB_VERSION_HISTORY}${SHLIB_VERSION_NUMBER}" \
+			-all lib$$i.a -none $$libs ${EX_LIBS} -lc ) || exit 1; \
+		libs="$$libs -l$$i"; \
+		done; \
+	fi
+
+
+# This assumes that GNU utilities are *not* used
+do_solaris-shared:
+	if ${DETECT_GNU_LD}; then \
+		$(MAKE) do_gnu-shared; \
+	else \
+		libs='-L. ${SHLIBDEPS}'; for i in ${SHLIBDIRS}; do \
+		( PATH=/usr/ccs/bin:$$PATH ; export PATH; \
+		  set -x; ${CC} ${SHARED_LDFLAGS} \
+			-G -o lib$$i.so.${SHLIB_MAJOR}.${SHLIB_MINOR} \
+			-h lib$$i.so.${SHLIB_MAJOR}.${SHLIB_MINOR} \
+			-z allextract lib$$i.a $$libs ${EX_LIBS} -lc ) || exit 1; \
+		libs="$$libs -l$$i"; \
+		done; \
+	fi
+
+# OpenServer 5 native compilers used
+do_svr3-shared:
+	if ${DETECT_GNU_LD}; then \
+		$(MAKE) do_gnu-shared; \
+	else \
+		libs='-L. ${SHLIBDEPS}'; for i in ${SHLIBDIRS}; do \
+		( PATH=/usr/ccs/bin:$$PATH ; export PATH; \
+		  find . -name "*.o" -print > allobjs ; \
+		  OBJS= ; export OBJS ; \
+		  for obj in `ar t lib$$i.a` ; do \
+		    OBJS="$${OBJS} `grep $$obj allobjs`" ; \
+		  done ; \
+		  set -x; ${CC}  -G -o lib$$i.so.${SHLIB_MAJOR}.${SHLIB_MINOR} \
+			-h lib$$i.so.${SHLIB_MAJOR}.${SHLIB_MINOR} \
+			$${OBJS} $$libs ${EX_LIBS} ) || exit 1; \
+		libs="$$libs -l$$i"; \
+		done; \
+	fi
+
+# UnixWare 7 and OpenUNIX 8 native compilers used
+do_svr5-shared:
+	if ${DETECT_GNU_LD}; then \
+		$(MAKE) do_gnu-shared; \
+	else \
+		libs='-L. ${SHLIBDEPS}'; for i in ${SHLIBDIRS}; do \
+		( PATH=/usr/ccs/bin:$$PATH ; export PATH; \
+		  find . -name "*.o" -print > allobjs ; \
+		  OBJS= ; export OBJS ; \
+		  for obj in `ar t lib$$i.a` ; do \
+		    OBJS="$${OBJS} `grep $$obj allobjs`" ; \
+		  done ; \
+		  set -x; ${CC} ${SHARED_LDFLAGS} \
+			-G -o lib$$i.so.${SHLIB_MAJOR}.${SHLIB_MINOR} \
+			-h lib$$i.so.${SHLIB_MAJOR}.${SHLIB_MINOR} \
+			$${OBJS} $$libs ${EX_LIBS} ) || exit 1; \
+		libs="$$libs -l$$i"; \
+		done; \
+	fi
+
+# This assumes that GNU utilities are *not* used
+do_irix-shared:
+	if ${DETECT_GNU_LD}; then \
+		$(MAKE) do_gnu-shared; \
+	else \
+		libs='-L. ${SHLIBDEPS}'; for i in ${SHLIBDIRS}; do \
+		( set -x; ${CC} ${SHARED_LDFLAGS} \
+			-shared -o lib$$i.so.${SHLIB_MAJOR}.${SHLIB_MINOR} \
+			-Wl,-soname,lib$$i.so.${SHLIB_MAJOR}.${SHLIB_MINOR} \
+			-all lib$$i.a $$libs ${EX_LIBS} -lc) || exit 1; \
+		libs="$$libs -l$$i"; \
+		done; \
+	fi
+
+# This assumes that GNU utilities are *not* used
+do_hpux-shared:
+	libs='-L. ${SHLIBDEPS}'; for i in ${SHLIBDIRS}; do \
+	( set -x; /usr/ccs/bin/ld ${SHARED_LDFLAGS} \
+		+vnocompatwarnings \
+		-b -z -o lib$$i.sl.${SHLIB_MAJOR}.${SHLIB_MINOR} \
+		+h lib$$i.sl.${SHLIB_MAJOR}.${SHLIB_MINOR} \
+		-Fl lib$$i.a $$libs ${EX_LIBS} -lc ) || exit 1; \
+	chmod a=rx lib$$i.sl.${SHLIB_MAJOR}.${SHLIB_MINOR} ; \
 	libs="$$libs -L. -l$$i"; \
+	done
+
+# This assumes that GNU utilities are *not* used
+do_hpux64-shared:
+	libs='-L. ${SHLIBDEPS}'; for i in ${SHLIBDIRS}; do \
+	( set -x; /usr/ccs/bin/ld ${SHARED_LDFLAGS} \
+		-b -z -o lib$$i.sl.${SHLIB_MAJOR}.${SHLIB_MINOR} \
+		+h lib$$i.sl.${SHLIB_MAJOR}.${SHLIB_MINOR} \
+		+forceload lib$$i.a $$libs ${EX_LIBS} -lc ) || exit 1; \
+	chmod a=rx lib$$i.sl.${SHLIB_MAJOR}.${SHLIB_MINOR} ; \
+	libs="$$libs -L. -l$$i"; \
+	done
+
+# The following method is said to work on all platforms.  Tests will
+# determine if that's how it's gong to be used.
+# This assumes that for all but GNU systems, GNU utilities are *not* used.
+# ALLSYMSFLAGS would be:
+#  GNU systems: --whole-archive
+#  Tru64 Unix:  -all
+#  Solaris:     -z allextract
+#  Irix:        -all
+#  HP/UX-32bit: -Fl
+#  HP/UX-64bit: +forceload
+#  AIX:		-bnogc
+# SHAREDFLAGS would be:
+#  GNU systems: -shared -Wl,-soname=lib$$i.so.${SHLIB_MAJOR}.${SHLIB_MINOR}
+#  Tru64 Unix:  -shared \
+#		-set_version "${SHLIB_VERSION_HISTORY}${SHLIB_VERSION_NUMBER}"
+#  Solaris:     -G -h lib$$i.so.${SHLIB_MAJOR}.${SHLIB_MINOR}
+#  Irix:        -shared -Wl,-soname,lib$$i.so.${SHLIB_MAJOR}.${SHLIB_MINOR}
+#  HP/UX-32bit: +vnocompatwarnings -b -z +s \
+#		+h lib$$i.sl.${SHLIB_MAJOR}.${SHLIB_MINOR}
+#  HP/UX-64bit: -b -z +h lib$$i.sl.${SHLIB_MAJOR}.${SHLIB_MINOR}
+#  AIX:		-G -bE:lib$$i.exp -bM:SRE
+# SHAREDCMD would be:
+#  GNU systems: $(CC)
+#  Tru64 Unix:  $(CC)
+#  Solaris:     $(CC)
+#  Irix:        $(CC)
+#  HP/UX-32bit: /usr/ccs/bin/ld
+#  HP/UX-64bit: /usr/ccs/bin/ld
+#  AIX:		$(CC)
+ALLSYMSFLAG=-bnogc
+SHAREDFLAGS=${SHARED_LDFLAGS} -G -bE:lib$$i.exp -bM:SRE
+SHAREDCMD=$(CC)
+do_aix-shared:
+	libs='-L. ${SHLIBDEPS}'; for i in ${SHLIBDIRS}; do \
 	( set -x; \
-		ln -s lib$$i.so.${SHLIB_MAJOR}.${SHLIB_MINOR} \
-			lib$$i.so.${SHLIB_MAJOR}; \
-		ln -s lib$$i.so.${SHLIB_MAJOR} lib$$i.so ); \
-	done
-
-# This assumes that GNU utilities are *not* used
-true64-shared:
-	libs='${SHLIBDEPS}'; for i in ${SHLIBDIRS}; do \
-	( set -x; ${CC}  -shared -no_archive -o lib$$i.so \
-		-set_version "${SHLIB_VERSION_HISTORY}${SHLIB_VERSION_NUMBER}" \
-		-all lib$$i.a -none $$libs ${EX_LIBS} -lc ) || exit 1; \
-	libs="$$libs -L. -l$$i"; \
-	done
-
-# This assumes that GNU utilities are *not* used
-solaris-shared:
-	libs='${SHLIBDEPS}'; for i in ${SHLIBDIRS}; do \
-	rm -f lib$$i.so \
-		lib$$i.so.${SHLIB_MAJOR} \
-		lib$$i.so.${SHLIB_MAJOR}.${SHLIB_MINOR}; \
-	( set -x; ${CC}  -G -o lib$$i.so.${SHLIB_MAJOR}.${SHLIB_MINOR} \
-		-h lib$$i.so.${SHLIB_MAJOR} \
-		-z allextract lib$$i.a $$libs ${EX_LIBS} -lc ) || exit 1; \
-	libs="$$libs -L. -l$$i"; \
-	ln -s lib$$i.so.${SHLIB_MAJOR}.${SHLIB_MINOR} \
-		lib$$i.so.${SHLIB_MAJOR}; \
-	ln -s lib$$i.so.${SHLIB_MAJOR} lib$$i.so; \
+	  ld -r -o $$i.o $(ALLSYMSFLAG) lib$$i.a && \
+	  ( nm -Pg lib$$i.o | grep ' [BD] ' | cut -f1 -d' ' > lib$$i.exp; \
+	    $(SHAREDCMD) $(SHAREDFLAG) -o lib$$i.so lib$$i.o \
+		$$libs ${EX_LIBS} ) ) \
+	|| exit 1; \
+	libs="$$libs -l$$i"; \
 	done
 
 Makefile.ssl: Makefile.org
@@ -306,7 +489,7 @@ clean:
 	rm -f shlib/*.o *.o core a.out fluff *.map rehash.time testlog make.log cctest cctest.c
 	@for i in $(DIRS) ;\
 	do \
-	if echo "$$i" | grep -v '^\.'; then \
+	if [ -d "$$i" ]; then \
 		(cd $$i && echo "making clean in $$i..." && \
 		$(MAKE) SDIRS='${SDIRS}' clean ) || exit 1; \
 		rm -f $(LIBS); \
@@ -327,7 +510,7 @@ files:
 	$(PERL) $(TOP)/util/files.pl Makefile.ssl > $(TOP)/MINFO
 	@for i in $(DIRS) ;\
 	do \
-	if echo "$$i" | grep -v '^\.'; then \
+	if [ -d "$$i" ]; then \
 		(cd $$i && echo "making 'files' in $$i..." && \
 		$(MAKE) SDIRS='${SDIRS}' PERL='${PERL}' files ) || exit 1; \
 	fi; \
@@ -338,17 +521,21 @@ links:
 	@$(PERL) $(TOP)/util/mkdir-p.pl include/openssl
 	@$(PERL) $(TOP)/util/mklink.pl include/openssl $(EXHEADER)
 	@for i in $(DIRS); do \
-	if echo "$$i" | grep -v '^\.'; then \
+	if [ -d "$$i" ]; then \
 		(cd $$i && echo "making links in $$i..." && \
 		$(MAKE) CC='${CC}' PLATFORM='${PLATFORM}' CFLAG='${CFLAG}' SDIRS='$(SDIRS)' INSTALLTOP='${INSTALLTOP}' PEX_LIBS='${PEX_LIBS}' EX_LIBS='${EX_LIBS}' BN_ASM='${BN_ASM}' DES_ENC='${DES_ENC}' BF_ENC='${BF_ENC}' CAST_ENC='${CAST_ENC}' RC4_ENC='${RC4_ENC}' RC5_ENC='${RC5_ENC}' SHA1_ASM_OBJ='${SHA1_ASM_OBJ}' MD5_ASM_OBJ='${MD5_ASM_OBJ}' RMD160_ASM_OBJ='${RMD160_ASM_OBJ}' AR='${AR}' PERL='${PERL}' links ) || exit 1; \
 	fi; \
 	done;
 
+gentests:
+	@(cd test && echo "generating dummy tests (if needed)..." && \
+	$(MAKE) CC='${CC}' PLATFORM='${PLATFORM}' CFLAG='${CFLAG}' SDIRS='$(SDIRS)' INSTALLTOP='${INSTALLTOP}' PEX_LIBS='${PEX_LIBS}' EX_LIBS='${EX_LIBS}' BN_ASM='${BN_ASM}' DES_ENC='${DES_ENC}' BF_ENC='${BF_ENC}' CAST_ENC='${CAST_ENC}' RC4_ENC='${RC4_ENC}' RC5_ENC='${RC5_ENC}' SHA1_ASM_OBJ='${SHA1_ASM_OBJ}' MD5_ASM_OBJ='${MD5_ASM_OBJ}' RMD160_ASM_OBJ='${RMD160_ASM_OBJ}' AR='${AR}' PROCESSOR='${PROCESSOR}' PERL='${PERL}' RANLIB='${RANLIB}' TESTS='${TESTS}' KRB5_INCLUDES='${KRB5_INCLUDES}' LIBKRB5='${LIBKRB5}' EXE_EXT='${EXE_EXT}' SHARED_LIBS='${SHARED_LIBS}' SHLIB_EXT='${SHLIB_EXT}' SHLIB_TARGET='${SHLIB_TARGET}' TESTS='${TESTS}' OPENSSL_DEBUG_MEMORY=on generate );
+
 dclean:
 	rm -f *.bak
 	@for i in $(DIRS) ;\
 	do \
-	if echo "$$i" | grep -v '^\.'; then \
+	if [ -d "$$i" ]; then \
 		(cd $$i && echo "making dclean in $$i..." && \
 		$(MAKE) SDIRS='${SDIRS}' PERL='${PERL}' dclean ) || exit 1; \
 	fi; \
@@ -363,7 +550,7 @@ test:   tests
 
 tests: rehash
 	@(cd test && echo "testing..." && \
-	$(MAKE) CC='${CC}' CFLAG='${CFLAG}' INSTALLTOP='${INSTALLTOP}' PEX_LIBS='${PEX_LIBS}' EX_LIBS='${EX_LIBS}' BN_ASM='${BN_ASM}' DES_ENC='${DES_ENC}' BF_ENC='${BF_ENC}' CAST_ENC='${CAST_ENC}' RC4_ENC='${RC4_ENC}' RC5_ENC='${RC5_ENC}' SDIRS='${SDIRS}' SHA1_ASM_OBJ='${SHA1_ASM_OBJ}' MD5_ASM_OBJ='${MD5_ASM_OBJ}' RMD160_ASM_OBJ='${RMD160_ASM_OBJ}' AR='${AR}' tests );
+	$(MAKE) CC='${CC}' PLATFORM='${PLATFORM}' CFLAG='${CFLAG}' SDIRS='$(SDIRS)' INSTALLTOP='${INSTALLTOP}' PEX_LIBS='${PEX_LIBS}' EX_LIBS='${EX_LIBS}' BN_ASM='${BN_ASM}' DES_ENC='${DES_ENC}' BF_ENC='${BF_ENC}' CAST_ENC='${CAST_ENC}' RC4_ENC='${RC4_ENC}' RC5_ENC='${RC5_ENC}' SHA1_ASM_OBJ='${SHA1_ASM_OBJ}' MD5_ASM_OBJ='${MD5_ASM_OBJ}' RMD160_ASM_OBJ='${RMD160_ASM_OBJ}' AR='${AR}' PROCESSOR='${PROCESSOR}' PERL='${PERL}' RANLIB='${RANLIB}' TESTS='${TESTS}' EXE_EXT='${EXE_EXT}' SHARED_LIBS='${SHARED_LIBS}' SHLIB_EXT='${SHLIB_EXT}' SHLIB_TARGET='${SHLIB_TARGET}' OPENSSL_DEBUG_MEMORY=on tests );
 	@apps/openssl version -a
 
 report:
@@ -372,16 +559,16 @@ report:
 depend:
 	@for i in $(DIRS) ;\
 	do \
-	if echo "$$i" | grep -v '^\.'; then \
+	if [ -d "$$i" ]; then \
 		(cd $$i && echo "making dependencies $$i..." && \
-		$(MAKE) SDIRS='${SDIRS}' DEPFLAG='${DEPFLAG}' depend ) || exit 1; \
+		$(MAKE) SDIRS='${SDIRS}' DEPFLAG='${DEPFLAG}' PERL='${PERL}' depend ) || exit 1; \
 	fi; \
 	done;
 
 lint:
 	@for i in $(DIRS) ;\
 	do \
-	if echo "$$i" | grep -v '^\.'; then \
+	if [ -d "$$i" ]; then \
 		(cd $$i && echo "making lint $$i..." && \
 		$(MAKE) SDIRS='${SDIRS}' lint ) || exit 1; \
 	fi; \
@@ -390,49 +577,58 @@ lint:
 tags:
 	@for i in $(DIRS) ;\
 	do \
-	if echo "$$i" | grep -v '^\.'; then \
+	if [ -d "$$i" ]; then \
 		(cd $$i && echo "making tags $$i..." && \
 		$(MAKE) SDIRS='${SDIRS}' tags ) || exit 1; \
 	fi; \
 	done;
 
 errors:
-	perl util/mkerr.pl -recurse -write
+	$(PERL) util/mkerr.pl -recurse -write
 
 stacks:
-	perl util/mkstack.pl -write
+	$(PERL) util/mkstack.pl -write
 
 util/libeay.num::
-	perl util/mkdef.pl crypto update
+	$(PERL) util/mkdef.pl crypto update
 
 util/ssleay.num::
-	perl util/mkdef.pl ssl update
+	$(PERL) util/mkdef.pl ssl update
 
 crypto/objects/obj_dat.h: crypto/objects/obj_mac.h crypto/objects/obj_dat.pl
-	perl crypto/objects/obj_dat.pl crypto/objects/obj_mac.h crypto/objects/obj_dat.h
+	$(PERL) crypto/objects/obj_dat.pl crypto/objects/obj_mac.h crypto/objects/obj_dat.h
 crypto/objects/obj_mac.h: crypto/objects/objects.pl crypto/objects/objects.txt 
-	perl crypto/objects/objects.pl crypto/objects/objects.txt crypto/objects/obj_mac.num crypto/objects/obj_mac.h
+	$(PERL) crypto/objects/objects.pl crypto/objects/objects.txt crypto/objects/obj_mac.num crypto/objects/obj_mac.h
 
 TABLE: Configure
 	(echo 'Output of `Configure TABLE'"':"; \
-	perl Configure TABLE) > TABLE
+	$(PERL) Configure TABLE) > TABLE
 
 update: depend errors stacks util/libeay.num util/ssleay.num crypto/objects/obj_dat.h TABLE
 
+# Build distribution tar-file. As the list of files returned by "find" is
+# pretty long, on several platforms a "too many arguments" error or similar
+# would occur. Therefore the list of files is temporarily stored into a file
+# and read directly, requiring GNU-Tar. Call "make TAR=gtar dist" if the normal
+# tar does not support the --files-from option.
 tar:
-	@$(TAR) $(TARFLAGS) -cvf - \
-		`find * \! -path CVS/\* \! -path \*/CVS/\* \! -name CVS \! -name .cvsignore \! -name STATUS \! -name TABLE | sort` |\
+	find . -type d -print | xargs chmod 755
+	find . -type f -print | xargs chmod a+r
+	find . -type f -perm -0100 -print | xargs chmod a+x
+	find * \! -path CVS/\* \! -path \*/CVS/\* \! -name CVS \! -name .cvsignore \! -name STATUS \! -name TABLE | sort > ../$(TARFILE).list; \
+	$(TAR) $(TARFLAGS) --files-from ../$(TARFILE).list -cvf - | \
 	tardy --user_number=0  --user_name=openssl \
 	      --group_number=0 --group_name=openssl \
 	      --prefix=openssl-$(VERSION) - |\
 	gzip --best >../$(TARFILE).gz; \
+	rm -f ../$(TARFILE).list; \
 	ls -l ../$(TARFILE).gz
 
 dist:   
 	$(PERL) Configure dist
 	@$(MAKE) dist_pem_h
 	@$(MAKE) SDIRS='${SDIRS}' clean
-	@$(MAKE) tar
+	@$(MAKE) TAR='${TAR}' TARFLAGS='${TARFLAGS}' tar
 
 dist_pem_h:
 	(cd crypto/pem; $(MAKE) CC='${CC}' SDIRS='${SDIRS}' CFLAG='${CFLAG}' pem.h; $(MAKE) clean)
@@ -452,20 +648,47 @@ install: all install_docs
 	done;
 	@for i in $(DIRS) ;\
 	do \
-	if echo "$$i" | grep -v '^\.'; then \
+	if [ -d "$$i" ]; then \
 		(cd $$i; echo "installing $$i..."; \
-		$(MAKE) CC='${CC}' CFLAG='${CFLAG}' INSTALL_PREFIX='${INSTALL_PREFIX}' INSTALLTOP='${INSTALLTOP}' OPENSSLDIR='${OPENSSLDIR}' EX_LIBS='${EX_LIBS}' SDIRS='${SDIRS}' RANLIB='${RANLIB}' install ); \
+		$(MAKE) CC='${CC}' CFLAG='${CFLAG}' INSTALL_PREFIX='${INSTALL_PREFIX}' INSTALLTOP='${INSTALLTOP}' OPENSSLDIR='${OPENSSLDIR}' EX_LIBS='${EX_LIBS}' SDIRS='${SDIRS}' RANLIB='${RANLIB}' EXE_EXT='${EXE_EXT}' install ); \
 	fi; \
 	done
 	@for i in $(LIBS) ;\
 	do \
 		if [ -f "$$i" ]; then \
 		(       echo installing $$i; \
-			cp $$i $(INSTALL_PREFIX)$(INSTALLTOP)/lib; \
-			$(RANLIB) $(INSTALL_PREFIX)$(INSTALLTOP)/lib/$$i; \
-			chmod 644 $(INSTALL_PREFIX)$(INSTALLTOP)/lib/$$i ); \
-		fi \
+			cp $$i $(INSTALL_PREFIX)$(INSTALLTOP)/lib/$$i.new; \
+			$(RANLIB) $(INSTALL_PREFIX)$(INSTALLTOP)/lib/$$i.new; \
+			chmod 644 $(INSTALL_PREFIX)$(INSTALLTOP)/lib/$$i.new; \
+			mv $(INSTALL_PREFIX)$(INSTALLTOP)/lib/$$i.new $(INSTALL_PREFIX)$(INSTALLTOP)/lib/$$i ); \
+		fi; \
 	done
+	@if [ -n "$(SHARED_LIBS)" ]; then \
+		tmp="$(SHARED_LIBS)"; \
+		for i in $${tmp:-x}; \
+		do \
+			if [ -f "$$i" -o -f "$$i.a" ]; then \
+			(       echo installing $$i; \
+				if [ "$(PLATFORM)" != "Cygwin" ]; then \
+					cp $$i $(INSTALL_PREFIX)$(INSTALLTOP)/lib/$$i.new; \
+					chmod 555 $(INSTALL_PREFIX)$(INSTALLTOP)/lib/$$i.new; \
+					mv $(INSTALL_PREFIX)$(INSTALLTOP)/lib/$$i.new $(INSTALL_PREFIX)$(INSTALLTOP)/lib/$$i; \
+				else \
+					c=`echo $$i | sed 's/^lib/cyg/'`; \
+					cp $$c $(INSTALL_PREFIX)$(INSTALLTOP)/bin/$$c.new; \
+					chmod 755 $(INSTALL_PREFIX)$(INSTALLTOP)/bin/$$c.new; \
+					mv $(INSTALL_PREFIX)$(INSTALLTOP)/bin/$$c.new $(INSTALL_PREFIX)$(INSTALLTOP)/bin/$$c; \
+					cp $$i.a $(INSTALL_PREFIX)$(INSTALLTOP)/lib/$$i.a.new; \
+					chmod 644 $(INSTALL_PREFIX)$(INSTALLTOP)/lib/$$i.a.new; \
+					mv $(INSTALL_PREFIX)$(INSTALLTOP)/lib/$$i.a.new $(INSTALL_PREFIX)$(INSTALLTOP)/lib/$$i.a; \
+				fi ); \
+			fi; \
+		done; \
+		(	here="`pwd`"; \
+			cd $(INSTALL_PREFIX)$(INSTALLTOP)/lib; \
+			set $(MAKE); \
+			$$1 -f $$here/Makefile link-shared ); \
+	fi
 
 install_docs:
 	@$(PERL) $(TOP)/util/mkdir-p.pl \
@@ -473,30 +696,26 @@ install_docs:
 		$(INSTALL_PREFIX)$(MANDIR)/man3 \
 		$(INSTALL_PREFIX)$(MANDIR)/man5 \
 		$(INSTALL_PREFIX)$(MANDIR)/man7
-	@echo installing man 1 and man 5
-	@for i in doc/apps/*.pod; do \
+	@pod2man="`cd util; ./pod2mantest $(PERL)`"; \
+	for i in doc/apps/*.pod; do \
 		fn=`basename $$i .pod`; \
-		sec=`[ "$$fn" = "config" ] && echo 5 || echo 1`; \
-		(cd `dirname $$i`; \
-		$(PERL) ../../util/pod2man.pl --section=$$sec --center=OpenSSL \
-			 --release=$(VERSION) `basename $$i`) \
+		if [ "$$fn" = "config" ]; then sec=5; else sec=1; fi; \
+		echo "installing man$$sec/`basename $$i .pod`.$$sec"; \
+		(cd `$(PERL) util/dirname.pl $$i`; \
+		sh -c "$$pod2man \
+			--section=$$sec --center=OpenSSL \
+			--release=$(VERSION) `basename $$i`") \
+			>  $(INSTALL_PREFIX)$(MANDIR)/man$$sec/`basename $$i .pod`.$$sec; \
+	done; \
+	for i in doc/crypto/*.pod doc/ssl/*.pod; do \
+		fn=`basename $$i .pod`; \
+		if [ "$$fn" = "des_modes" ]; then sec=7; else sec=3; fi; \
+		echo "installing man$$sec/`basename $$i .pod`.$$sec"; \
+		(cd `$(PERL) util/dirname.pl $$i`; \
+		sh -c "$$pod2man \
+			--section=$$sec --center=OpenSSL \
+			--release=$(VERSION) `basename $$i`") \
 			>  $(INSTALL_PREFIX)$(MANDIR)/man$$sec/`basename $$i .pod`.$$sec; \
 	done
-	@echo installing man 3 and man 7
-	@for i in doc/crypto/*.pod doc/ssl/*.pod; do \
-		fn=`basename $$i .pod`; \
-		sec=`[ "$$fn" = "des_modes" ] && echo 7 || echo 3`; \
-		(cd `dirname $$i`; \
-		$(PERL) ../../util/pod2man.pl --section=$$sec --center=OpenSSL \
-			--release=$(VERSION) `basename $$i`) \
-			>  $(INSTALL_PREFIX)$(MANDIR)/man$$sec/`basename $$i .pod`.$$sec; \
-	done
-
-shlib: all
-	if [ ! -d shlib_dir ] ; then mkdir shlib_dir ; else rm -f shlib_dir/* ; fi
-	cd shlib_dir ; ar -x ../libcrypto.a && $(CC) -shared ./*.o -Wl,-soname -Wl,libcrypto.so.0.9 \
-            -o ./libcrypto.so.0.9.4 && rm *.o
-	cd shlib_dir ; ar -x ../libssl.a && $(CC) -shared ./*.o -Wl,-soname -Wl,libssl.so.0.9 \
-            -o ./libssl.so.0.9.4 && rm *.o
 
 # DO NOT DELETE THIS LINE -- make depend depends on it.

NEWS

@@ -5,6 +5,93 @@
   This file gives a brief overview of the major changes between each OpenSSL
   release. For more details please read the CHANGES file.
 
+  Major changes between OpenSSL 0.9.6g and OpenSSL 0.9.6h:
+
+      o New configuration targets for Tandem OSS and A/UX.
+      o New OIDs for Microsoft attributes.
+      o Better handling of SSL session caching.
+      o Better comparison of distinguished names.
+      o Better handling of shared libraries in a mixed GNU/non-GNU environment.
+      o Support assembler code with Borland C.
+      o Fixes for length problems.
+      o Fixes for uninitialised variables.
+      o Fixes for memory leaks, some unusual crashes and some race conditions.
+      o Fixes for smaller building problems.
+      o Updates of manuals, FAQ and other instructive documents.
+
+  Major changes between OpenSSL 0.9.6f and OpenSSL 0.9.6g:
+
+      o Important building fixes on Unix.
+
+  Major changes between OpenSSL 0.9.6e and OpenSSL 0.9.6f:
+
+      o Various important bugfixes.
+
+  Major changes between OpenSSL 0.9.6d and OpenSSL 0.9.6e:
+
+      o Important security related bugfixes.
+      o Various SSL/TLS library bugfixes.
+
+  Major changes between OpenSSL 0.9.6c and OpenSSL 0.9.6d:
+
+      o Various SSL/TLS library bugfixes.
+      o Fix DH parameter generation for 'non-standard' generators.
+
+  Major changes between OpenSSL 0.9.6b and OpenSSL 0.9.6c:
+
+      o Various SSL/TLS library bugfixes.
+      o BIGNUM library fixes.
+      o RSA OAEP and random number generation fixes.
+      o Object identifiers corrected and added.
+      o Add assembler BN routines for IA64.
+      o Add support for OS/390 Unix, UnixWare with gcc, OpenUNIX 8,
+        MIPS Linux; shared library support for Irix, HP-UX.
+      o Add crypto accelerator support for AEP, Baltimore SureWare,
+        Broadcom and Cryptographic Appliance's keyserver
+        [in 0.9.6c-engine release].
+
+  Major changes between OpenSSL 0.9.6a and OpenSSL 0.9.6b:
+
+      o Security fix: PRNG improvements.
+      o Security fix: RSA OAEP check.
+      o Security fix: Reinsert and fix countermeasure to Bleichbacher's
+        attack.
+      o MIPS bug fix in BIGNUM.
+      o Bug fix in "openssl enc".
+      o Bug fix in X.509 printing routine.
+      o Bug fix in DSA verification routine and DSA S/MIME verification.
+      o Bug fix to make PRNG thread-safe.
+      o Bug fix in RAND_file_name().
+      o Bug fix in compatibility mode trust settings.
+      o Bug fix in blowfish EVP.
+      o Increase default size for BIO buffering filter.
+      o Compatibility fixes in some scripts.
+
+  Major changes between OpenSSL 0.9.6 and OpenSSL 0.9.6a:
+
+      o Security fix: change behavior of OpenSSL to avoid using
+        environment variables when running as root.
+      o Security fix: check the result of RSA-CRT to reduce the
+        possibility of deducing the private key from an incorrectly
+        calculated signature.
+      o Security fix: prevent Bleichenbacher's DSA attack.
+      o Security fix: Zero the premaster secret after deriving the
+        master secret in DH ciphersuites.
+      o Reimplement SSL_peek(), which had various problems.
+      o Compatibility fix: the function des_encrypt() renamed to
+        des_encrypt1() to avoid clashes with some Unixen libc.
+      o Bug fixes for Win32, HP/UX and Irix.
+      o Bug fixes in BIGNUM, SSL, PKCS#7, PKCS#12, X.509, CONF and
+        memory checking routines.
+      o Bug fixes for RSA operations in threaded environments.
+      o Bug fixes in misc. openssl applications.
+      o Remove a few potential memory leaks.
+      o Add tighter checks of BIGNUM routines.
+      o Shared library support has been reworked for generality.
+      o More documentation.
+      o New function BN_rand_range().
+      o Add "-rand" option to openssl s_client and s_server.
+
   Major changes between OpenSSL 0.9.5a and OpenSSL 0.9.6:
 
       o Some documentation for BIO and SSL libraries.

PROBLEMS

@@ -0,0 +1,58 @@
+* System libcrypto.dylib and libssl.dylib are used by system ld on MacOS X.
+[NOTE: This is currently undergoing tests, and may be removed soon]
+
+This is really a misfeature in ld, which seems to look for .dylib libraries
+along the whole library path before it bothers looking for .a libraries.  This
+means that -L switches won't matter unless OpenSSL is built with shared
+library support.
+
+The workaround may be to change the following lines in apps/Makefile.ssl and
+test/Makefile.ssl:
+
+  LIBCRYPTO=-L.. -lcrypto
+  LIBSSL=-L.. -lssl
+
+to:
+
+  LIBCRYPTO=../libcrypto.a
+  LIBSSL=../libssl.a
+
+It's possible that something similar is needed for shared library support
+as well.  That hasn't been well tested yet.
+
+
+Another solution that many seem to recommend is to move the libraries
+/usr/lib/libcrypto.0.9.dylib, /usr/lib/libssl.0.9.dylib to a different
+directory, build and install OpenSSL and anything that depends on your
+build, then move libcrypto.0.9.dylib and libssl.0.9.dylib back to their
+original places.  Note that the version numbers on those two libraries
+may differ on your machine.
+
+
+As long as Apple doesn't fix the problem with ld, this problem building
+OpenSSL will remain as is.
+
+
+* Parallell make leads to errors
+
+While running tests, running a parallell make is a bad idea.  Many test
+scripts use the same name for output and input files, which means different
+will interfere with each other and lead to test failure.
+
+The solution is simple for now: don't run parallell make when testing.
+
+
+* Bugs in gcc 3.0 triggered
+
+According to a problem report, there are bugs in gcc 3.0 that are
+triggered by some of the code in OpenSSL, more specifically in
+PEM_get_EVP_CIPHER_INFO().  The triggering code is the following:
+
+	header+=11;
+	if (*header != '4') return(0); header++;
+	if (*header != ',') return(0); header++;
+
+What happens is that gcc might optimize a little too agressively, and
+you end up with an extra incrementation when *header != '4'.
+
+We recommend that you upgrade gcc to as high a 3.x version as you can.

README

@@ -1,7 +1,7 @@
 
- OpenSSL 0.9.6 24 Sep 2000
+ OpenSSL 0.9.6h  5 Dec 2002
 
- Copyright (c) 1998-2000 The OpenSSL Project
+ Copyright (c) 1998-2002 The OpenSSL Project
  Copyright (c) 1995-1998 Eric A. Young, Tim J. Hudson
  All rights reserved.
 
@@ -62,7 +62,7 @@
 
      X.509v3 certificates
         X509 encoding/decoding into/from binary ASN1 and a PEM
-             based ascii-binary encoding which supports encryption with a
+             based ASCII-binary encoding which supports encryption with a
              private key.  Program to generate RSA and DSA certificate
              requests and to generate RSA and DSA certificates.
 
@@ -97,7 +97,7 @@
  locations around the world. _YOU_ are responsible for ensuring that your use
  of any algorithms is legal by checking if there are any patents in your
  country.  The file contains some of the patents that we know about or are
- rumoured to exist. This is not a definitive list.
+ rumored to exist. This is not a definitive list.
 
  RSA Security holds software patents on the RC5 algorithm.  If you
  intend to use this cipher, you must contact RSA Security for
@@ -107,8 +107,8 @@
  only be used with RSA Security's permission. 
 
  The IDEA algorithm is patented by Ascom in Austria, France, Germany, Italy,
- Japan, Netherlands, Spain, Sweden, Switzerland, UK and the USA.  They should
- be contacted if that algorithm is to be used, their web page is
+ Japan, the Netherlands, Spain, Sweden, Switzerland, UK and the USA.  They
+ should be contacted if that algorithm is to be used; their web page is
  http://www.ascom.ch/.
 
  INSTALLATION
@@ -119,8 +119,15 @@
  INSTALL.VMS.
 
  Read the documentation in the doc/ directory.  It is quite rough, but it
- lists the functions, you will probably have to look at the code to work out
- how to used them. Look at the example programs.
+ lists the functions; you will probably have to look at the code to work out
+ how to use them. Look at the example programs.
+
+ PROBLEMS
+ --------
+
+ For some platforms, there are some known problems that may affect the user
+ or application author.  We try to collect those in doc/PROBLEMS, with current
+ thoughts on how they should be solved in a future of OpenSSL.
 
  SUPPORT 
  -------
@@ -146,11 +153,13 @@
     - Problem Description (steps that will reproduce the problem, if known)
     - Stack Traceback (if the application dumps core)
 
- Report the bug to the OpenSSL project at:
+ Report the bug to the OpenSSL project via the Request Tracker
+ (http://www.openssl.org/rt2.html) by mail to:
 
     openssl-bugs@openssl.org
 
- Note that mail to openssl-bugs@openssl.org is forwarded to a public
+ Note that mail to openssl-bugs@openssl.org is recorded in the publicly
+ readable request tracker database and is forwarded to a public
  mailing list. Confidential mail may be sent to openssl-security@openssl.org
  (PGP key available from the key servers).
 
@@ -164,7 +173,9 @@
  textual explanation of what your patch does.
 
  Note: For legal reasons, contributions from the US can be accepted only
- if a copy of the patch is sent to crypt@bxa.doc.gov
+ if a TSA notification and a copy of the patch is sent to crypt@bis.doc.gov;
+ see http://www.bis.doc.gov/Encryption/PubAvailEncSourceCodeNofify.html [sic]
+ and http://w3.access.gpo.gov/bis/ear/pdf/740.pdf (EAR Section 740.13(e)).
 
  The preferred format for changes is "diff -u" output. You might
  generate it like this:

README.ENGINE

@@ -5,7 +5,7 @@
   With OpenSSL 0.9.6, a new component has been added to support external 
   crypto devices, for example accelerator cards.  The component is called
   ENGINE, and has still a pretty experimental status and almost no
-  documentation.  It's designed to be faily easily extensible by the
+  documentation.  It's designed to be fairly easily extensible by the
   calling programs.
 
   There's currently built-in support for the following crypto devices:
@@ -48,7 +48,7 @@
   No external crypto device is chosen unless you say so.  You have actively
   tell the openssl utility commands to use it through a new command line
   switch called "-engine".  And if you want to use the ENGINE library to
-  do something similar, you must also explicitely choose an external crypto
+  do something similar, you must also explicitly choose an external crypto
   device, or the built-in crypto routines will be used, just as in the
   default OpenSSL distribution.
 
@@ -56,7 +56,7 @@
   PROBLEMS
   ========
 
-  It seems like the ENGINE part doesn't work too well with Cryptoswift on
+  It seems like the ENGINE part doesn't work too well with CryptoSwift on
   Win32.  A quick test done right before the release showed that trying
   "openssl speed -engine cswift" generated errors.  If the DSO gets enabled,
   an attempt is made to write at memory address 0x00000002.

STATUS

@@ -1,9 +1,18 @@
 
   OpenSSL STATUS                           Last modified at
-  ______________                           $Date: 2000/09/24 15:42:34 $
+  ______________                           $Date: 2002/12/05 21:40:43 $
 
   DEVELOPMENT STATE
 
+    o  OpenSSL 0.9.7:  Under development...
+    o  OpenSSL 0.9.6h: Released on December   5th, 2002
+    o  OpenSSL 0.9.6g: Released on August     9th, 2002
+    o  OpenSSL 0.9.6f: Released on August     8th, 2002
+    o  OpenSSL 0.9.6e: Released on July      30th, 2002
+    o  OpenSSL 0.9.6d: Released on May        9th, 2002
+    o  OpenSSL 0.9.6c: Released on December  21st, 2001
+    o  OpenSSL 0.9.6b: Released on July       9th, 2001
+    o  OpenSSL 0.9.6a: Released on April      5th, 2001
     o  OpenSSL 0.9.6:  Released on September 24th, 2000
     o  OpenSSL 0.9.5a: Released on April      1st, 2000
     o  OpenSSL 0.9.5:  Released on February  28th, 2000
@@ -15,38 +24,44 @@
 
   RELEASE SHOWSTOPPERS
 
+    o none
+
   AVAILABLE PATCHES
 
-    o CA.pl patch (Damien Miller)
+    o 
 
   IN PROGRESS
 
     o Steve is currently working on (in no particular order):
         ASN1 code redesign, butchery, replacement.
+        OCSP
         EVP cipher enhancement.
-        Proper (or at least usable) certificate chain verification.
+        Enhanced certificate chain verification.
 	Private key, certificate and CRL API and implementation.
 	Developing and bugfixing PKCS#7 (S/MIME code).
         Various X509 issues: character sets, certificate request extensions.
     o Geoff and Richard are currently working on:
 	ENGINE (the new code that gives hardware support among others).
     o Richard is currently working on:
+	UI (User Interface)
 	UTIL (a new set of library functions to support some higher level
 	      functionality that is currently missing).
-	Dynamic thread-lock support.
 	Shared library support for VMS.
+	Kerberos 5 authentication
+	Constification
+	OCSP
 
   NEEDS PATCH
 
-    o  non-blocking socket on AIX
-    o  $(PERL) in */Makefile.ssl
-    o  "Sign the certificate?" - "n" creates empty certificate file
+    o  apps/ca.c: "Sign the certificate?" - "n" creates empty certificate file
+
+    o  Whenever strncpy is used, make sure the resulting string is NULL-terminated
+       or an error is reported
+
+    o  "OpenSSL STATUS" is never up-to-date.
 
   OPEN ISSUES
 
-    o internal_verify doesn't know about X509.v3 (basicConstraints
-      CA flag ...)
-
     o  The Makefile hierarchy and build mechanism is still not a round thing:
 
        1. The config vs. Configure scripts
@@ -89,4 +104,14 @@
 
   WISHES
 
-    o 
+    o  SRP in TLS.
+       [wished by:
+        Dj <derek@yo.net>, Tom Wu <tom@arcot.com>,
+        Tom Holroyd <tomh@po.crl.go.jp>]
+
+       See http://search.ietf.org/internet-drafts/draft-ietf-tls-srp-00.txt
+       as well as http://www-cs-students.stanford.edu/~tjw/srp/.
+
+       Tom Holroyd tells us there is a SRP patch for OpenSSH at
+       http://members.tripod.com/professor_tom/archives/, that could
+       be useful.

apps/app_rand.c

@@ -177,8 +177,10 @@ long app_RAND_load_files(char *name)
 		if (*n == '\0') break;
 
 		egd=RAND_egd(n);
-		if (egd > 0) tot+=egd;
-		tot+=RAND_load_file(n,-1);
+		if (egd > 0)
+			tot+=egd;
+		else
+			tot+=RAND_load_file(n,-1);
 		if (last) break;
 		}
 	if (tot > 512)

apps/apps.c

@@ -228,9 +228,16 @@ void program_name(char *in, char *out, int size)
 
 	q=strrchr(p,'.');
 	if (q == NULL)
-		q = in+size;
-	strncpy(out,p,q-p);
-	out[q-p]='\0';
+		q = p + strlen(p);
+	strncpy(out,p,size-1);
+	if (q-p >= size)
+		{
+		out[size-1]='\0';
+		}
+	else
+		{
+		out[q-p]='\0';
+		}
 	}
 #else
 void program_name(char *in, char *out, int size)
@@ -755,7 +762,7 @@ int set_name_ex(unsigned long *flags, const char *arg)
 
 void print_name(BIO *out, char *title, X509_NAME *nm, unsigned long lflags)
 {
-	char buf[256];
+	char *buf;
 	char mline = 0;
 	int indent = 0;
 	if(title) BIO_puts(out, title);
@@ -764,9 +771,10 @@ void print_name(BIO *out, char *title, X509_NAME *nm, unsigned long lflags)
 		indent = 4;
 	}
 	if(lflags == XN_FLAG_COMPAT) {
-		X509_NAME_oneline(nm,buf,256);
-		BIO_puts(out,buf);
+		buf = X509_NAME_oneline(nm, 0, 0);
+		BIO_puts(out, buf);
 		BIO_puts(out, "\n");
+		OPENSSL_free(buf);
 	} else {
 		if(mline) BIO_puts(out, "\n");
 		X509_NAME_print_ex(out, nm, indent, lflags);

apps/apps.h

@@ -92,8 +92,10 @@ int WIN32_rename(char *oldname,char *newname);
 #define MAIN(a,v)	main(a,v)
 
 #ifndef NON_MAIN
+LHASH *config=NULL;
 BIO *bio_err=NULL;
 #else
+extern LHASH *config;
 extern BIO *bio_err;
 #endif
 

apps/asn1pars.c

@@ -181,7 +181,7 @@ bad:
 		BIO_printf(bio_err,"where options are\n");
 		BIO_printf(bio_err," -inform arg   input format - one of DER TXT PEM\n");
 		BIO_printf(bio_err," -in arg       input file\n");
-		BIO_printf(bio_err," -out arg      output file\n");
+		BIO_printf(bio_err," -out arg      output file (output format is always DER\n");
 		BIO_printf(bio_err," -noout arg    don't produce any output\n");
 		BIO_printf(bio_err," -offset arg   offset into file\n");
 		BIO_printf(bio_err," -length arg   length of section in file\n");
@@ -192,7 +192,6 @@ bad:
 		BIO_printf(bio_err," -strparse offset\n");
 		BIO_printf(bio_err,"               a series of these can be used to 'dig' into multiple\n");
 		BIO_printf(bio_err,"               ASN1 blob wrappings\n");
-		BIO_printf(bio_err," -out filename output DER encoding to file\n");
 		goto end;
 		}
 
@@ -329,6 +328,6 @@ end:
 	if (at != NULL) ASN1_TYPE_free(at);
 	if (osk != NULL) sk_free(osk);
 	OBJ_cleanup();
-	EXIT(ret);
+	OPENSSL_EXIT(ret);
 	}
 

apps/ca-cert.srl

@@ -1 +1 @@
-05
+07

apps/ca.c

@@ -82,7 +82,7 @@
 #    else
 #      include <unixlib.h>
 #    endif
-#  else
+#  elif !defined(VXWORKS)
 #    include <sys/file.h>
 #  endif
 #endif
@@ -543,7 +543,7 @@ bad:
 		goto err;
 		}
 		pkey=PEM_read_bio_PrivateKey(in,NULL,NULL,key);
-		if(key) memset(key,0,strlen(key));
+		if(key) OPENSSL_cleanse(key,strlen(key));
 	if (pkey == NULL)
 		{
 		BIO_printf(bio_err,"unable to load CA private key\n");
@@ -606,12 +606,14 @@ bad:
 	       that to access().  However, time's too short to do that just
 	       now.
             */
+#ifndef VXWORKS
 		if (access(outdir,R_OK|W_OK|X_OK) != 0)
 			{
 			BIO_printf(bio_err,"I am unable to access the %s directory\n",outdir);
 			perror(outdir);
 			goto err;
 			}
+#endif
 
 		if (stat(outdir,&sb) != 0)
 			{
@@ -829,9 +831,14 @@ bad:
 			}
 		if (verbose)
 			{
-			if ((f=BN_bn2hex(serial)) == NULL) goto err;
-			BIO_printf(bio_err,"next serial number is %s\n",f);
-			OPENSSL_free(f);
+			if (BN_is_zero(serial))
+				BIO_printf(bio_err,"next serial number is 00\n");
+			else
+				{
+				if ((f=BN_bn2hex(serial)) == NULL) goto err;
+				BIO_printf(bio_err,"next serial number is %s\n",f);
+				OPENSSL_free(f);
+				}
 			}
 
 		if ((attribs=CONF_get_section(conf,policy)) == NULL)
@@ -1108,7 +1115,7 @@ bad:
 			}
 		if ((crldays == 0) && (crlhours == 0))
 			{
-			BIO_printf(bio_err,"cannot lookup how long until the next CRL is issuer\n");
+			BIO_printf(bio_err,"cannot lookup how long until the next CRL is issued\n");
 			goto err;
 			}
 
@@ -1220,7 +1227,11 @@ bad:
 			X509_free(revcert);
 
 			strncpy(buf[0],dbfile,BSIZE-4);
+#ifndef VMS
 			strcat(buf[0],".new");
+#else
+			strcat(buf[0],"-new");
+#endif
 			if (BIO_write_filename(out,buf[0]) <= 0)
 				{
 				perror(dbfile);
@@ -1230,7 +1241,11 @@ bad:
 			j=TXT_DB_write(out,db);
 			if (j <= 0) goto err;
 			strncpy(buf[1],dbfile,BSIZE-4);
+#ifndef VMS
 			strcat(buf[1],".old");
+#else
+			strcat(buf[1],"-old");
+#endif
 			if (rename(dbfile,buf[1]) < 0)
 				{
 				BIO_printf(bio_err,"unable to rename %s to %s\n", dbfile, buf[1]);
@@ -1267,7 +1282,7 @@ err:
 	X509_CRL_free(crl);
 	CONF_free(conf);
 	OBJ_cleanup();
-	EXIT(ret);
+	OPENSSL_EXIT(ret);
 	}
 
 static void lookup_fail(char *name, char *tag)
@@ -1332,7 +1347,7 @@ static BIGNUM *load_serial(char *serialfile)
 	ret=ASN1_INTEGER_to_BN(ai,NULL);
 	if (ret == NULL)
 		{
-		BIO_printf(bio_err,"error converting number from bin to BIGNUM");
+		BIO_printf(bio_err,"error converting number from bin to BIGNUM\n");
 		goto err;
 		}
 err:
@@ -1720,7 +1735,10 @@ again2:
 		BIO_printf(bio_err,"The subject name appears to be ok, checking data base for clashes\n");
 
 	row[DB_name]=X509_NAME_oneline(subject,NULL,0);
-	row[DB_serial]=BN_bn2hex(serial);
+	if (BN_is_zero(serial))
+		row[DB_serial]=BUF_strdup("00");
+	else
+		row[DB_serial]=BN_bn2hex(serial);
 	if ((row[DB_name] == NULL) || (row[DB_serial] == NULL))
 		{
 		BIO_printf(bio_err,"Memory allocation failure\n");
@@ -2134,7 +2152,10 @@ static int do_revoke(X509 *x509, TXT_DB *db)
 		row[i]=NULL;
 	row[DB_name]=X509_NAME_oneline(X509_get_subject_name(x509),NULL,0);
 	bn = ASN1_INTEGER_to_BN(X509_get_serialNumber(x509),NULL);
-	row[DB_serial]=BN_bn2hex(bn);
+	if (BN_is_zero(bn))
+		row[DB_serial]=BUF_strdup("00");
+	else
+		row[DB_serial]=BN_bn2hex(bn);
 	BN_free(bn);
 	if ((row[DB_name] == NULL) || (row[DB_serial] == NULL))
 		{

apps/ciphers.c

@@ -202,6 +202,6 @@ end:
 	if (ctx != NULL) SSL_CTX_free(ctx);
 	if (ssl != NULL) SSL_free(ssl);
 	if (STDout != NULL) BIO_free_all(STDout);
-	EXIT(ret);
+	OPENSSL_EXIT(ret);
 	}
 

apps/crl.c

@@ -364,7 +364,7 @@ end:
 		X509_STORE_CTX_cleanup(&ctx);
 		X509_STORE_free(store);
 	}
-	EXIT(ret);
+	OPENSSL_EXIT(ret);
 	}
 
 static X509_CRL *load_crl(char *infile, int format)

apps/crl2p7.c

@@ -166,7 +166,7 @@ bad:
 		BIO_printf(bio_err," -certfile arg  certificates file of chain to a trusted CA\n");
 		BIO_printf(bio_err,"                (can be used more than once)\n");
 		BIO_printf(bio_err," -nocrl         no crl to load, just certs from '-certfile'\n");
-		EXIT(1);
+		OPENSSL_EXIT(1);
 		}
 
 	ERR_load_crypto_strings();
@@ -278,7 +278,7 @@ end:
 	if (p7 != NULL) PKCS7_free(p7);
 	if (crl != NULL) X509_CRL_free(crl);
 
-	EXIT(ret);
+	OPENSSL_EXIT(ret);
 	}
 
 /*

apps/dgst.c

@@ -73,7 +73,7 @@
 #undef PROG
 #define PROG	dgst_main
 
-void do_fp(BIO *out, unsigned char *buf, BIO *bp, int sep, char binout,
+void do_fp(BIO *out, unsigned char *buf, BIO *bp, int sep, int binout,
 		EVP_PKEY *key, unsigned char *sigin, int siglen);
 
 int MAIN(int, char **);
@@ -87,13 +87,13 @@ int MAIN(int argc, char **argv)
 	BIO *bmd=NULL;
 	BIO *out = NULL;
 	const char *name;
-#define PROG_NAME_SIZE  16
-	char pname[PROG_NAME_SIZE];
+#define PROG_NAME_SIZE  39
+	char pname[PROG_NAME_SIZE+1];
 	int separator=0;
 	int debug=0;
 	const char *outfile = NULL, *keyfile = NULL;
 	const char *sigfile = NULL, *randfile = NULL;
-	char out_bin = -1, want_pub = 0, do_verify = 0;
+	int out_bin = -1, want_pub = 0, do_verify = 0;
 	EVP_PKEY *sigkey = NULL;
 	unsigned char *sigbuf = NULL;
 	int siglen = 0;
@@ -327,7 +327,7 @@ int MAIN(int argc, char **argv)
 end:
 	if (buf != NULL)
 		{
-		memset(buf,0,BUFSIZE);
+		OPENSSL_cleanse(buf,BUFSIZE);
 		OPENSSL_free(buf);
 		}
 	if (in != NULL) BIO_free(in);
@@ -335,10 +335,10 @@ end:
 	EVP_PKEY_free(sigkey);
 	if(sigbuf) OPENSSL_free(sigbuf);
 	if (bmd != NULL) BIO_free(bmd);
-	EXIT(err);
+	OPENSSL_EXIT(err);
 	}
 
-void do_fp(BIO *out, unsigned char *buf, BIO *bp, int sep, char binout,
+void do_fp(BIO *out, unsigned char *buf, BIO *bp, int sep, int binout,
 			EVP_PKEY *key, unsigned char *sigin, int siglen)
 	{
 	int len;

apps/dh.c

@@ -319,6 +319,6 @@ end:
 	if (in != NULL) BIO_free(in);
 	if (out != NULL) BIO_free_all(out);
 	if (dh != NULL) DH_free(dh);
-	EXIT(ret);
+	OPENSSL_EXIT(ret);
 	}
 #endif

apps/dhparam.c

@@ -506,7 +506,7 @@ end:
 	if (in != NULL) BIO_free(in);
 	if (out != NULL) BIO_free_all(out);
 	if (dh != NULL) DH_free(dh);
-	EXIT(ret);
+	OPENSSL_EXIT(ret);
 	}
 
 /* dh_cb is identical to dsa_cb in apps/dsaparam.c */

apps/dsa.c

@@ -293,6 +293,6 @@ end:
 	if(dsa != NULL) DSA_free(dsa);
 	if(passin) OPENSSL_free(passin);
 	if(passout) OPENSSL_free(passout);
-	EXIT(ret);
+	OPENSSL_EXIT(ret);
 	}
 #endif

apps/dsaparam.c

@@ -176,7 +176,7 @@ bad:
 		BIO_printf(bio_err," -outform arg  output format - DER or PEM\n");
 		BIO_printf(bio_err," -in arg       input file\n");
 		BIO_printf(bio_err," -out arg      output file\n");
-		BIO_printf(bio_err," -text         print the key in text\n");
+		BIO_printf(bio_err," -text         print as text\n");
 		BIO_printf(bio_err," -C            Output C code\n");
 		BIO_printf(bio_err," -noout        no output\n");
 		BIO_printf(bio_err," -rand         files to use for random number input\n");
@@ -311,7 +311,7 @@ bad:
 		printf("\tdsa->g=BN_bin2bn(dsa%d_g,sizeof(dsa%d_g),NULL);\n",
 			bits_p,bits_p);
 		printf("\tif ((dsa->p == NULL) || (dsa->q == NULL) || (dsa->g == NULL))\n");
-		printf("\t\treturn(NULL);\n");
+		printf("\t\t{ DSA_free(dsa); return(NULL); }\n");
 		printf("\treturn(dsa);\n\t}\n");
 		}
 
@@ -357,7 +357,7 @@ end:
 	if (in != NULL) BIO_free(in);
 	if (out != NULL) BIO_free_all(out);
 	if (dsa != NULL) DSA_free(dsa);
-	EXIT(ret);
+	OPENSSL_EXIT(ret);
 	}
 
 static void MS_CALLBACK dsa_cb(int p, int n, void *arg)

apps/enc.c

@@ -99,8 +99,8 @@ int MAIN(int argc, char **argv)
 	const EVP_CIPHER *cipher=NULL,*c;
 	char *inf=NULL,*outf=NULL;
 	BIO *in=NULL,*out=NULL,*b64=NULL,*benc=NULL,*rbio=NULL,*wbio=NULL;
-#define PROG_NAME_SIZE  16
-	char pname[PROG_NAME_SIZE];
+#define PROG_NAME_SIZE  39
+	char pname[PROG_NAME_SIZE+1];
 
 	apps_startup();
 
@@ -506,15 +506,23 @@ bad:
 			 * bug picked up by
 			 * Larry J. Hughes Jr. <hughes@indiana.edu> */
 			if (str == strbuf)
-				memset(str,0,SIZE);
+				OPENSSL_cleanse(str,SIZE);
 			else
-				memset(str,0,strlen(str));
+				OPENSSL_cleanse(str,strlen(str));
 			}
 		if ((hiv != NULL) && !set_hex(hiv,iv,8))
 			{
 			BIO_printf(bio_err,"invalid hex iv value\n");
 			goto end;
 			}
+		if ((hiv == NULL) && (str == NULL))
+			{
+			/* No IV was explicitly set and no IV was generated
+			 * during EVP_BytesToKey. Hence the IV is undefined,
+			 * making correct decryption impossible. */
+			BIO_printf(bio_err, "iv undefined\n");
+			goto end;
+			}
 		if ((hkey != NULL) && !set_hex(hkey,key,24))
 			{
 			BIO_printf(bio_err,"invalid hex key value\n");
@@ -596,7 +604,7 @@ end:
 	if (benc != NULL) BIO_free(benc);
 	if (b64 != NULL) BIO_free(b64);
 	if(pass) OPENSSL_free(pass);
-	EXIT(ret);
+	OPENSSL_EXIT(ret);
 	}
 
 int set_hex(char *in, unsigned char *out, int size)

apps/errstr.c

@@ -121,5 +121,5 @@ int MAIN(int argc, char **argv)
 			ret++;
 			}
 		}
-	EXIT(ret);
+	OPENSSL_EXIT(ret);
 	}

apps/gendh.c

@@ -184,7 +184,7 @@ end:
 		ERR_print_errors(bio_err);
 	if (out != NULL) BIO_free_all(out);
 	if (dh != NULL) DH_free(dh);
-	EXIT(ret);
+	OPENSSL_EXIT(ret);
 	}
 
 static void MS_CALLBACK dh_cb(int p, int n, void *arg)

apps/gendsa.c

@@ -220,6 +220,6 @@ end:
 	if (out != NULL) BIO_free_all(out);
 	if (dsa != NULL) DSA_free(dsa);
 	if(passout) OPENSSL_free(passout);
-	EXIT(ret);
+	OPENSSL_EXIT(ret);
 	}
 #endif

apps/genrsa.c

@@ -224,7 +224,7 @@ err:
 	if(passout) OPENSSL_free(passout);
 	if (ret != 0)
 		ERR_print_errors(bio_err);
-	EXIT(ret);
+	OPENSSL_EXIT(ret);
 	}
 
 static void MS_CALLBACK genrsa_cb(int p, int n, void *arg)

apps/makeapps.com

@@ -1077,7 +1077,7 @@ $ CC = CC + "/DEFINE=(" + CCDEFS + ")" + CCDISABLEWARNINGS
 $!
 $! Show user the result
 $!
-$ WRITE SYS$OUTPUT "Main Compiling Command: ",CC
+$ WRITE/SYMBOL SYS$OUTPUT "Main Compiling Command: ",CC
 $!
 $! Special Threads For OpenVMS v7.1 Or Later
 $!
@@ -1133,6 +1133,7 @@ $!
 $! Save directory information
 $!
 $ __HERE = F$PARSE(F$PARSE("A.;",F$ENVIRONMENT("PROCEDURE"))-"A.;","[]A.;") - "A.;"
+$ __HERE = F$EDIT(__HERE,"UPCASE")
 $ __TOP = __HERE - "APPS]"
 $ __INCLUDE = __TOP + "INCLUDE.OPENSSL]"
 $!

apps/nseq.c

@@ -102,7 +102,7 @@ int MAIN(int argc, char **argv)
 		BIO_printf (bio_err, "-in file  input file\n");
 		BIO_printf (bio_err, "-out file output file\n");
 		BIO_printf (bio_err, "-toseq    output NS Sequence file\n");
-		EXIT(1);
+		OPENSSL_EXIT(1);
 	}
 
 	if (infile) {
@@ -162,6 +162,6 @@ end:
 	BIO_free_all(out);
 	NETSCAPE_CERT_SEQUENCE_free(seq);
 
-	EXIT(ret);
+	OPENSSL_EXIT(ret);
 }
 

apps/openssl.c

@@ -77,19 +77,19 @@ static unsigned long MS_CALLBACK hash(FUNCTION *a);
 static int MS_CALLBACK cmp(FUNCTION *a,FUNCTION *b);
 static LHASH *prog_init(void );
 static int do_cmd(LHASH *prog,int argc,char *argv[]);
-LHASH *config=NULL;
 char *default_config_file=NULL;
 
 /* Make sure there is only one when MONOLITH is defined */
 #ifdef MONOLITH
+LHASH *config=NULL;
 BIO *bio_err=NULL;
 #endif
 
 int main(int Argc, char *Argv[])
 	{
 	ARGS arg;
-#define PROG_NAME_SIZE	16
-	char pname[PROG_NAME_SIZE];
+#define PROG_NAME_SIZE	39
+	char pname[PROG_NAME_SIZE+1];
 	FUNCTION f,*fp;
 	MS_STATIC char *prompt,buf[1024],config_name[256];
 	int n,i,ret=0;
@@ -215,7 +215,7 @@ end:
 		BIO_free(bio_err);
 		bio_err=NULL;
 		}
-	EXIT(ret);
+	OPENSSL_EXIT(ret);
 	}
 
 #define LIST_STANDARD_COMMANDS "list-standard-commands"

apps/passwd.c

@@ -272,6 +272,7 @@ int MAIN(int argc, char **argv)
 			}
 		while (!done);
 		}
+	ret = 0;
 
 err:
 	ERR_print_errors(bio_err);
@@ -283,7 +284,7 @@ err:
 		BIO_free(in);
 	if (out)
 		BIO_free_all(out);
-	EXIT(ret);
+	OPENSSL_EXIT(ret);
 	}
 
 
@@ -315,7 +316,7 @@ static char *md5crypt(const char *passwd, const char *magic, const char *salt)
 	strncat(out_buf, "$", 1);
 	strncat(out_buf, salt, 8);
 	assert(strlen(out_buf) <= 6 + 8); /* "$apr1$..salt.." */
-	salt_out = out_buf + 6;
+	salt_out = out_buf + 2 + strlen(magic);
 	salt_len = strlen(salt_out);
 	assert(salt_len <= 8);
 	
@@ -497,6 +498,6 @@ err:
 int MAIN(int argc, char **argv)
 	{
 	fputs("Program not available.\n", stderr)
-	EXIT(1);
+	OPENSSL_EXIT(1);
 	}
 #endif

apps/pca-cert.srl

@@ -1 +1 @@
-01
+07

apps/pkcs12.c

@@ -480,9 +480,10 @@ int MAIN(int argc, char **argv)
 		    /* Exclude verified certificate */
 		    for (i = 1; i < sk_X509_num (chain2) ; i++) 
 			sk_X509_push(certs, sk_X509_value (chain2, i));
-		}
-		sk_X509_free(chain2);
-		if (vret) {
+		    /* Free first certificate */
+		    X509_free(sk_X509_value(chain2, 0));
+		    sk_X509_free(chain2);
+		} else {
 			BIO_printf (bio_err, "Error %s getting chain.\n",
 					X509_verify_cert_error_string(vret));
 			goto export_end;
@@ -509,8 +510,6 @@ int MAIN(int argc, char **argv)
 	}
 	sk_X509_pop_free(certs, X509_free);
 	certs = NULL;
-	/* ucert is part of certs so it is already freed */
-	ucert = NULL;
 
 #ifdef CRYPTO_MDEBUG
 	CRYPTO_pop_info();
@@ -598,7 +597,6 @@ int MAIN(int argc, char **argv)
 	if (certs) sk_X509_pop_free(certs, X509_free);
 	if (safes) sk_PKCS7_pop_free(safes, PKCS7_free);
 	if (bags) sk_PKCS12_SAFEBAG_pop_free(bags, PKCS12_SAFEBAG_free);
-	if (ucert) X509_free(ucert);
 
 #ifdef CRYPTO_MDEBUG
 	CRYPTO_pop_info();
@@ -668,7 +666,7 @@ int MAIN(int argc, char **argv)
     if (canames) sk_free(canames);
     if(passin) OPENSSL_free(passin);
     if(passout) OPENSSL_free(passout);
-    EXIT(ret);
+    OPENSSL_EXIT(ret);
 }
 
 int dump_certs_keys_p12 (BIO *out, PKCS12 *p12, char *pass,
@@ -749,7 +747,10 @@ int dump_certs_pkeys_bag (BIO *out, PKCS12_SAFEBAG *bag, char *pass,
 		print_attribs (out, bag->attrib, "Bag Attributes");
 		if (!(p8 = M_PKCS12_decrypt_skey (bag, pass, passlen)))
 				return 0;
-		if (!(pkey = EVP_PKCS82PKEY (p8))) return 0;
+		if (!(pkey = EVP_PKCS82PKEY (p8))) {
+			PKCS8_PRIV_KEY_INFO_free(p8);
+			return 0;
+		}
 		print_attribs (out, p8->attributes, "Key Attributes");
 		PKCS8_PRIV_KEY_INFO_free(p8);
 		PEM_write_bio_PrivateKey (out, pkey, enc, NULL, 0, NULL, pempass);

apps/pkcs7.c

@@ -88,7 +88,7 @@ int MAIN(int argc, char **argv)
 	int informat,outformat;
 	char *infile,*outfile,*prog;
 	int print_certs=0,text=0,noout=0;
-	int ret=0;
+	int ret=1;
 
 	apps_startup();
 
@@ -154,7 +154,7 @@ bad:
 		BIO_printf(bio_err," -print_certs  print any certs or crl in the input\n");
 		BIO_printf(bio_err," -text         print full details of certificates\n");
 		BIO_printf(bio_err," -noout        don't output encoded data\n");
-		EXIT(1);
+		OPENSSL_EXIT(1);
 		}
 
 	ERR_load_crypto_strings();
@@ -289,5 +289,5 @@ end:
 	if (p7 != NULL) PKCS7_free(p7);
 	if (in != NULL) BIO_free(in);
 	if (out != NULL) BIO_free_all(out);
-	EXIT(ret);
+	OPENSSL_EXIT(ret);
 	}

apps/pkcs8.c

@@ -236,7 +236,8 @@ int MAIN(int argc, char **argv)
 			if(passout) p8pass = passout;
 			else {
 				p8pass = pass;
-				EVP_read_pw_string(pass, 50, "Enter Encryption Password:", 1);
+				if (EVP_read_pw_string(pass, 50, "Enter Encryption Password:", 1))
+					return (1);
 			}
 			app_RAND_load_file(NULL, bio_err, 0);
 			if (!(p8 = PKCS8_encrypt(pbe_nid, cipher,

apps/rand.c

@@ -144,5 +144,5 @@ err:
 	ERR_print_errors(bio_err);
 	if (out)
 		BIO_free_all(out);
-	EXIT(ret);
+	OPENSSL_EXIT(ret);
 	}

apps/req.c

@@ -283,7 +283,7 @@ int MAIN(int argc, char **argv)
 						goto end;
 						}
 
-					dtmp=X509_get_pubkey(xtmp);
+					if ((dtmp=X509_get_pubkey(xtmp)) == NULL) goto end;
 					if (dtmp->type == EVP_PKEY_DSA)
 						dsa_params=DSAparams_dup(dtmp->pkey.dsa);
 					EVP_PKEY_free(dtmp);
@@ -383,8 +383,7 @@ bad:
 		BIO_printf(bio_err,"                the random number generator\n");
 		BIO_printf(bio_err," -newkey rsa:bits generate a new RSA key of 'bits' in size\n");
 		BIO_printf(bio_err," -newkey dsa:file generate a new DSA key, parameters taken from CA in 'file'\n");
-
-		BIO_printf(bio_err," -[digest]      Digest to sign with (md5, sha1, md2, mdc2)\n");
+		BIO_printf(bio_err," -[digest]      Digest to sign with (md5, sha1, md2, mdc2, md4)\n");
 		BIO_printf(bio_err," -config file   request template file.\n");
 		BIO_printf(bio_err," -new           new request.\n");
 		BIO_printf(bio_err," -x509          output a x509 structure instead of a cert. req.\n");
@@ -423,7 +422,7 @@ bad:
 
 	if (template != NULL)
 		{
-		long errline;
+		long errline = -1;
 
 		BIO_printf(bio_err,"Using configuration from %s\n",template);
 		req_conf=CONF_load(NULL,template,&errline);
@@ -685,16 +684,15 @@ loop:
 
 	if (newreq || x509)
 		{
-#ifndef NO_DSA
-		if (pkey->type == EVP_PKEY_DSA)
-			digest=EVP_dss1();
-#endif
-
 		if (pkey == NULL)
 			{
 			BIO_printf(bio_err,"you need to specify a private key\n");
 			goto end;
 			}
+#ifndef NO_DSA
+		if (pkey->type == EVP_PKEY_DSA)
+			digest=EVP_dss1();
+#endif
 		if (req == NULL)
 			{
 			req=X509_REQ_new();
@@ -720,17 +718,14 @@ loop:
 
 			/* Set version to V3 */
 			if(!X509_set_version(x509ss, 2)) goto end;
-			ASN1_INTEGER_set(X509_get_serialNumber(x509ss),0L);
+			if (!ASN1_INTEGER_set(X509_get_serialNumber(x509ss),0L)) goto end;
 
-			X509_set_issuer_name(x509ss,
-				X509_REQ_get_subject_name(req));
-			X509_gmtime_adj(X509_get_notBefore(x509ss),0);
-			X509_gmtime_adj(X509_get_notAfter(x509ss),
-				(long)60*60*24*days);
-			X509_set_subject_name(x509ss,
-				X509_REQ_get_subject_name(req));
+			if (!X509_set_issuer_name(x509ss, X509_REQ_get_subject_name(req))) goto end;
+			if (!X509_gmtime_adj(X509_get_notBefore(x509ss),0)) goto end;
+			if (!X509_gmtime_adj(X509_get_notAfter(x509ss), (long)60*60*24*days)) goto end;
+			if (!X509_set_subject_name(x509ss, X509_REQ_get_subject_name(req))) goto end;
 			tmppkey = X509_REQ_get_pubkey(req);
-			X509_set_pubkey(x509ss,tmppkey);
+			if (!tmppkey || !X509_set_pubkey(x509ss,tmppkey)) goto end;
 			EVP_PKEY_free(tmppkey);
 
 			/* Set up V3 context struct */
@@ -914,7 +909,7 @@ end:
 #ifndef NO_DSA
 	if (dsa_params != NULL) DSA_free(dsa_params);
 #endif
-	EXIT(ex);
+	OPENSSL_EXIT(ex);
 	}
 
 static int make_REQ(X509_REQ *req, EVP_PKEY *pkey, int attribs)
@@ -961,7 +956,7 @@ static int make_REQ(X509_REQ *req, EVP_PKEY *pkey, int attribs)
 	else i = prompt_info(req, dn_sk, dn_sect, attr_sk, attr_sect, attribs);
 	if(!i) goto err;
 
-	X509_REQ_set_pubkey(req,pkey);
+	if (!X509_REQ_set_pubkey(req,pkey)) goto err;
 
 	ret=1;
 err:

apps/rsa.c

@@ -389,7 +389,7 @@ end:
 	if(rsa != NULL) RSA_free(rsa);
 	if(passin) OPENSSL_free(passin);
 	if(passout) OPENSSL_free(passout);
-	EXIT(ret);
+	OPENSSL_EXIT(ret);
 	}
 #else /* !NO_RSA */
 

apps/rsautl.c

@@ -55,6 +55,9 @@
  * Hudson (tjh@cryptsoft.com).
  *
  */
+
+#ifndef NO_RSA
+
 #include "apps.h"
 #include <string.h>
 #include <openssl/err.h>
@@ -288,3 +291,4 @@ static void usage()
 	BIO_printf(bio_err, "-hexdump        hex dump output\n");
 }
 
+#endif

apps/s_client.c

@@ -79,6 +79,7 @@ typedef unsigned int u_int;
 #include <openssl/ssl.h>
 #include <openssl/err.h>
 #include <openssl/pem.h>
+#include <openssl/rand.h>
 #include "s_apps.h"
 
 #ifdef WINDOWS
@@ -152,6 +153,7 @@ static void sc_usage(void)
 	BIO_printf(bio_err," -bugs         - Switch on all SSL implementation bug workarounds\n");
 	BIO_printf(bio_err," -cipher       - preferred cipher to use, use the 'openssl ciphers'\n");
 	BIO_printf(bio_err,"                 command to see what is available\n");
+	BIO_printf(bio_err," -rand file%cfile%c...\n", LIST_SEPARATOR_CHAR, LIST_SEPARATOR_CHAR);
 
 	}
 
@@ -179,6 +181,7 @@ int MAIN(int argc, char **argv)
 	int prexit = 0;
 	SSL_METHOD *meth=NULL;
 	BIO *sbio;
+	char *inrand=NULL;
 #ifdef WINDOWS
 	struct timeval tv;
 #endif
@@ -316,6 +319,11 @@ int MAIN(int argc, char **argv)
 		else if (strcmp(*argv,"-nbio") == 0)
 			{ c_nbio=1; }
 #endif
+		else if (strcmp(*argv,"-rand") == 0)
+			{
+			if (--argc < 1) goto bad;
+			inrand= *(++argv);
+			}
 		else
 			{
 			BIO_printf(bio_err,"unknown option %s\n",*argv);
@@ -332,7 +340,14 @@ bad:
 		goto end;
 		}
 
-	app_RAND_load_file(NULL, bio_err, 0);
+	if (!app_RAND_load_file(NULL, bio_err, 1) && inrand == NULL
+		&& !RAND_status())
+		{
+		BIO_printf(bio_err,"warning, not much extra random data, consider using the -rand option\n");
+		}
+	if (inrand != NULL)
+		BIO_printf(bio_err,"%ld semi-random bytes loaded\n",
+			app_RAND_load_files(inrand));
 
 	if (bio_c_out == NULL)
 		{
@@ -753,14 +768,14 @@ end:
 	if (con != NULL) SSL_free(con);
 	if (con2 != NULL) SSL_free(con2);
 	if (ctx != NULL) SSL_CTX_free(ctx);
-	if (cbuf != NULL) { memset(cbuf,0,BUFSIZZ); OPENSSL_free(cbuf); }
-	if (sbuf != NULL) { memset(sbuf,0,BUFSIZZ); OPENSSL_free(sbuf); }
+	if (cbuf != NULL) { OPENSSL_cleanse(cbuf,BUFSIZZ); OPENSSL_free(cbuf); }
+	if (sbuf != NULL) { OPENSSL_cleanse(sbuf,BUFSIZZ); OPENSSL_free(sbuf); }
 	if (bio_c_out != NULL)
 		{
 		BIO_free(bio_c_out);
 		bio_c_out=NULL;
 		}
-	EXIT(ret);
+	OPENSSL_EXIT(ret);
 	}
 
 
@@ -881,5 +896,7 @@ static void print_stuff(BIO *bio, SSL *s, int full)
 	BIO_printf(bio,"---\n");
 	if (peer != NULL)
 		X509_free(peer);
+	/* flush, or debugging output gets mixed with http response */
+	BIO_flush(bio);
 	}
 

apps/s_server.c

@@ -83,6 +83,7 @@ typedef unsigned int u_int;
 #include <openssl/pem.h>
 #include <openssl/x509.h>
 #include <openssl/ssl.h>
+#include <openssl/rand.h>
 #include "s_apps.h"
 
 #ifdef WINDOWS
@@ -242,6 +243,7 @@ static void sv_usage(void)
 	BIO_printf(bio_err," -bugs         - Turn on SSL bug compatibility\n");
 	BIO_printf(bio_err," -www          - Respond to a 'GET /' with a status page\n");
 	BIO_printf(bio_err," -WWW          - Respond to a 'GET /<path> HTTP/1.0' with file ./<path>\n");
+	BIO_printf(bio_err," -rand file%cfile%c...\n", LIST_SEPARATOR_CHAR, LIST_SEPARATOR_CHAR);
 	}
 
 static int local_argc=0;
@@ -251,10 +253,10 @@ static char **local_argv;
 static int ebcdic_new(BIO *bi);
 static int ebcdic_free(BIO *a);
 static int ebcdic_read(BIO *b, char *out, int outl);
-static int ebcdic_write(BIO *b, char *in, int inl);
-static long ebcdic_ctrl(BIO *b, int cmd, long num, char *ptr);
+static int ebcdic_write(BIO *b, const char *in, int inl);
+static long ebcdic_ctrl(BIO *b, int cmd, long num, void *ptr);
 static int ebcdic_gets(BIO *bp, char *buf, int size);
-static int ebcdic_puts(BIO *bp, char *str);
+static int ebcdic_puts(BIO *bp, const char *str);
 
 #define BIO_TYPE_EBCDIC_FILTER	(18|0x0200)
 static BIO_METHOD methods_ebcdic=
@@ -319,7 +321,7 @@ static int ebcdic_read(BIO *b, char *out, int outl)
 	return(ret);
 }
 
-static int ebcdic_write(BIO *b, char *in, int inl)
+static int ebcdic_write(BIO *b, const char *in, int inl)
 {
 	EBCDIC_OUTBUFF *wbuf;
 	int ret=0;
@@ -352,7 +354,7 @@ static int ebcdic_write(BIO *b, char *in, int inl)
 	return(ret);
 }
 
-static long ebcdic_ctrl(BIO *b, int cmd, long num, char *ptr)
+static long ebcdic_ctrl(BIO *b, int cmd, long num, void *ptr)
 {
 	long ret;
 
@@ -371,7 +373,7 @@ static long ebcdic_ctrl(BIO *b, int cmd, long num, char *ptr)
 
 static int ebcdic_gets(BIO *bp, char *buf, int size)
 {
-	int i, ret;
+	int i, ret=0;
 	if (bp->next_bio == NULL) return(0);
 /*	return(BIO_gets(bp->next_bio,buf,size));*/
 	for (i=0; i<size-1; ++i)
@@ -390,7 +392,7 @@ static int ebcdic_gets(BIO *bp, char *buf, int size)
 	return (ret < 0 && i == 0) ? ret : i;
 }
 
-static int ebcdic_puts(BIO *bp, char *str)
+static int ebcdic_puts(BIO *bp, const char *str)
 {
 	if (bp->next_bio == NULL) return(0);
 	return ebcdic_write(bp, str, strlen(str));
@@ -411,6 +413,7 @@ int MAIN(int argc, char *argv[])
 	int no_tmp_rsa=0,no_dhe=0,nocert=0;
 	int state=0;
 	SSL_METHOD *meth=NULL;
+	char *inrand=NULL;
 #ifndef NO_DH
 	DH *dh=NULL;
 #endif
@@ -565,6 +568,11 @@ int MAIN(int argc, char *argv[])
 		else if	(strcmp(*argv,"-tls1") == 0)
 			{ meth=TLSv1_server_method(); }
 #endif
+		else if (strcmp(*argv,"-rand") == 0)
+			{
+			if (--argc < 1) goto bad;
+			inrand= *(++argv);
+			}
 		else
 			{
 			BIO_printf(bio_err,"unknown option %s\n",*argv);
@@ -581,7 +589,14 @@ bad:
 		goto end;
 		}
 
-	app_RAND_load_file(NULL, bio_err, 0);
+	if (!app_RAND_load_file(NULL, bio_err, 1) && inrand == NULL
+		&& !RAND_status())
+		{
+		BIO_printf(bio_err,"warning, not much extra random data, consider using the -rand option\n");
+		}
+	if (inrand != NULL)
+		BIO_printf(bio_err,"%ld semi-random bytes loaded\n",
+			app_RAND_load_files(inrand));
 
 	if (bio_s_out == NULL)
 		{
@@ -676,7 +691,8 @@ bad:
 
 #ifndef NO_RSA
 #if 1
-	SSL_CTX_set_tmp_rsa_callback(ctx,tmp_rsa_cb);
+	if (!no_tmp_rsa)
+		SSL_CTX_set_tmp_rsa_callback(ctx,tmp_rsa_cb);
 #else
 	if (!no_tmp_rsa && SSL_CTX_need_tmp_RSA(ctx))
 		{
@@ -725,7 +741,7 @@ end:
 		BIO_free(bio_s_out);
 		bio_s_out=NULL;
 		}
-	EXIT(ret);
+	OPENSSL_EXIT(ret);
 	}
 
 static void print_stats(BIO *bio, SSL_CTX *ssl_ctx)
@@ -1027,7 +1043,7 @@ err:
 	BIO_printf(bio_s_out,"CONNECTION CLOSED\n");
 	if (buf != NULL)
 		{
-		memset(buf,0,bufsize);
+		OPENSSL_cleanse(buf,bufsize);
 		OPENSSL_free(buf);
 		}
 	if (ret >= 0)
@@ -1234,7 +1250,7 @@ static int www_body(char *hostname, int s, unsigned char *context)
 			else
 				{
 				BIO_printf(bio_s_out,"read R BLOCK\n");
-#ifndef MSDOS
+#if !defined(MSDOS) && !defined(VXWORKS)
 				sleep(1);
 #endif
 				continue;
@@ -1336,15 +1352,29 @@ static int www_body(char *hostname, int s, unsigned char *context)
 
 			/* skip the '/' */
 			p= &(buf[5]);
-			dot=0;
+
+			dot = 1;
 			for (e=p; *e != '\0'; e++)
 				{
-				if (e[0] == ' ') break;
-				if (	(e[0] == '.') &&
-					(strncmp(&(e[-1]),"/../",4) == 0))
-					dot=1;
+				if (e[0] == ' ')
+					break;
+
+				switch (dot)
+					{
+				case 1:
+					dot = (e[0] == '.') ? 2 : 0;
+					break;
+				case 2:
+					dot = (e[0] == '.') ? 3 : 0;
+					break;
+				case 3:
+					dot = (e[0] == '/') ? -1 : 0;
+					break;
+					}
+				if (dot == 0)
+					dot = (e[0] == '/') ? 1 : 0;
 				}
-			
+			dot = (dot == 3) || (dot == -1); /* filename contains ".." component */
 
 			if (*e == '\0')
 				{
@@ -1368,9 +1398,11 @@ static int www_body(char *hostname, int s, unsigned char *context)
 				break;
 				}
 
+#if 0
 			/* append if a directory lookup */
 			if (e[-1] == '/')
 				strcat(p,"index.html");
+#endif
 
 			/* if a directory, do the index thang */
 			if (stat(p,&st_buf) < 0)
@@ -1382,7 +1414,13 @@ static int www_body(char *hostname, int s, unsigned char *context)
 				}
 			if (S_ISDIR(st_buf.st_mode))
 				{
+#if 0 /* must check buffer size */
 				strcat(p,"/index.html");
+#else
+				BIO_puts(io,text);
+				BIO_printf(io,"'%s' is a directory\r\n",p);
+				break;
+#endif
 				}
 
 			if ((file=BIO_new_file(p,"r")) == NULL)

apps/s_time.c

@@ -82,7 +82,7 @@
 #include "wintext.h"
 #endif
 
-#if !defined(MSDOS) && (!defined(VMS) || defined(__DECC))
+#if !defined(MSDOS) && !defined(VXWORKS) && (!defined(VMS) || defined(__DECC)) || defined (_DARWIN)
 #define TIMES
 #endif
 
@@ -102,7 +102,7 @@
 #undef TIMES
 #endif
 
-#ifndef TIMES
+#if !defined(TIMES) && !defined(VXWORKS)
 #include <sys/timeb.h>
 #endif
 
@@ -116,6 +116,11 @@
 #include <sys/param.h>
 #endif
 
+#ifdef VXWORKS
+#include <tickLib.h>
+#undef SIGALRM
+#endif
+
 /* The following if from times(3) man page.  It may need to be changed
 */
 #ifndef HZ
@@ -139,6 +144,8 @@
 #undef BUFSIZZ
 #define BUFSIZZ 1024*10
 
+#undef min
+#undef max
 #define min(a,b) (((a) < (b)) ? (a) : (b))
 #define max(a,b) (((a) > (b)) ? (a) : (b))
 
@@ -368,6 +375,22 @@ static double tm_Time_F(int s)
 		ret=((double)(tend.tms_utime-tstart.tms_utime))/HZ;
 		return((ret == 0.0)?1e-6:ret);
 	}
+#elif defined(VXWORKS)
+        {
+	static unsigned long tick_start, tick_end;
+
+	if( s == START )
+		{
+		tick_start = tickGet();
+		return 0;
+		}
+	else
+		{
+		tick_end = tickGet();
+		ret = (double)(tick_end - tick_start) / (double)sysClkRateGet();
+		return((ret == 0.0)?1e-6:ret);
+		}
+        }
 #else /* !times() */
 	static struct timeb tstart,tend;
 	long i;
@@ -443,7 +466,7 @@ int MAIN(int argc, char **argv)
 
 	if (tm_cipher == NULL ) {
 		fprintf( stderr, "No CIPHER specified\n" );
-/*		EXIT(1); */
+/*		OPENSSL_EXIT(1); */
 	}
 
 	if (!(perform & 1)) goto next;
@@ -610,7 +633,7 @@ end:
 		SSL_CTX_free(tm_ctx);
 		tm_ctx=NULL;
 		}
-	EXIT(ret);
+	OPENSSL_EXIT(ret);
 	}
 
 /***********************************************************************

apps/server.pem

@@ -1,17 +1,17 @@
 issuer= /C=AU/ST=Queensland/O=CryptSoft Pty Ltd/CN=Test CA (1024 bit)
-subject=/C=AU/ST=Queensland/O=CryptSoft Pty Ltd/CN=Server test cert (512 bit)
+subject= /C=AU/ST=Queensland/O=CryptSoft Pty Ltd/CN=Server test cert (512 bit)
 -----BEGIN CERTIFICATE-----
-MIIB6TCCAVICAQQwDQYJKoZIhvcNAQEEBQAwWzELMAkGA1UEBhMCQVUxEzARBgNV
+MIIB6TCCAVICAQYwDQYJKoZIhvcNAQEEBQAwWzELMAkGA1UEBhMCQVUxEzARBgNV
 BAgTClF1ZWVuc2xhbmQxGjAYBgNVBAoTEUNyeXB0U29mdCBQdHkgTHRkMRswGQYD
-VQQDExJUZXN0IENBICgxMDI0IGJpdCkwHhcNOTgwNjI5MjM1MjQwWhcNMDAwNjI4
-MjM1MjQwWjBjMQswCQYDVQQGEwJBVTETMBEGA1UECBMKUXVlZW5zbGFuZDEaMBgG
+VQQDExJUZXN0IENBICgxMDI0IGJpdCkwHhcNMDAxMDE2MjIzMTAzWhcNMDMwMTE0
+MjIzMTAzWjBjMQswCQYDVQQGEwJBVTETMBEGA1UECBMKUXVlZW5zbGFuZDEaMBgG
 A1UEChMRQ3J5cHRTb2Z0IFB0eSBMdGQxIzAhBgNVBAMTGlNlcnZlciB0ZXN0IGNl
 cnQgKDUxMiBiaXQpMFwwDQYJKoZIhvcNAQEBBQADSwAwSAJBAJ+zw4Qnlf8SMVIP
 Fe9GEcStgOY2Ww/dgNdhjeD8ckUJNP5VZkVDTGiXav6ooKXfX3j/7tdkuD8Ey2//
-Kv7+ue0CAwEAATANBgkqhkiG9w0BAQQFAAOBgQCVvvfkGSe2GHgDFfmOua4Isjb9
-JVhImWMASiOClkZlMESDJjsszg/6+d/W+8TrbObhazpl95FivXBVucbj9dudh7AO
-IZu1h1MAPlyknc9Ud816vz3FejB4qqUoaXjnlkrIgEbr/un7jSS86WOe0hRhwHkJ
-FUGcPZf9ND22Etc+AQ==
+Kv7+ue0CAwEAATANBgkqhkiG9w0BAQQFAAOBgQCT0grFQeZaqYb5EYfk20XixZV4
+GmyAbXMftG1Eo7qGiMhYzRwGNWxEYojf5PZkYZXvSqZ/ZXHXa4g59jK/rJNnaVGM
+k+xIX8mxQvlV0n5O9PIha5BX5teZnkHKgL8aKKLKW1BK7YTngsfSzzaeame5iKfz
+itAE+OjGF+PFKbwX8Q==
 -----END CERTIFICATE-----
 -----BEGIN RSA PRIVATE KEY-----
 MIIBPAIBAAJBAJ+zw4Qnlf8SMVIPFe9GEcStgOY2Ww/dgNdhjeD8ckUJNP5VZkVD

apps/sess_id.c

@@ -272,7 +272,7 @@ bad:
 end:
 	if (out != NULL) BIO_free_all(out);
 	if (x != NULL) SSL_SESSION_free(x);
-	EXIT(ret);
+	OPENSSL_EXIT(ret);
 	}
 
 static SSL_SESSION *load_sess_id(char *infile, int format)

apps/smime.c

@@ -290,6 +290,7 @@ int MAIN(int argc, char **argv)
 		BIO_printf (bio_err, "-text          include or delete text MIME headers\n");
 		BIO_printf (bio_err, "-CApath dir    trusted certificates directory\n");
 		BIO_printf (bio_err, "-CAfile file   trusted certificates file\n");
+		BIO_printf (bio_err, "-passin arg    input file pass phrase source\n");
 		BIO_printf(bio_err,  "-rand file%cfile%c...\n", LIST_SEPARATOR_CHAR, LIST_SEPARATOR_CHAR);
 		BIO_printf(bio_err,  "               load the file (or the files in the directory) into\n");
 		BIO_printf(bio_err,  "               the random number generator\n");
@@ -413,7 +414,10 @@ int MAIN(int argc, char **argv)
 		p7 = PKCS7_encrypt(encerts, in, cipher, flags);
 	} else if(operation == SMIME_SIGN) {
 		p7 = PKCS7_sign(signer, key, other, in, flags);
-		BIO_reset(in);
+		if (BIO_reset(in) != 0 && (flags & PKCS7_DETACHED)) {
+		  BIO_printf(bio_err, "Can't rewind input file\n");
+		  goto end;
+		}
 	} else {
 		if(informat == FORMAT_SMIME) 
 			p7 = SMIME_read_PKCS7(in, &indata);
@@ -453,9 +457,9 @@ int MAIN(int argc, char **argv)
 	} else if(operation == SMIME_VERIFY) {
 		STACK_OF(X509) *signers;
 		if(PKCS7_verify(p7, other, store, indata, out, flags)) {
-			BIO_printf(bio_err, "Verification Successful\n");
+			BIO_printf(bio_err, "Verification successful\n");
 		} else {
-			BIO_printf(bio_err, "Verification Failure\n");
+			BIO_printf(bio_err, "Verification failure\n");
 			goto end;
 		}
 		signers = PKCS7_get0_signers(p7, other, flags);

apps/speed.c

@@ -82,12 +82,12 @@
 #include <openssl/rand.h>
 #include <openssl/err.h>
 
-#if defined(__FreeBSD__)
+#if defined(__FreeBSD__) || defined(__NetBSD__) || defined(__OpenBSD__) || defined(_DARWIN)
 # define USE_TOD
-#elif !defined(MSDOS) && (!defined(VMS) || defined(__DECC))
+#elif !defined(MSDOS) && !defined(VXWORKS) && (!defined(VMS) || defined(__DECC))
 # define TIMES
 #endif
-#if !defined(_UNICOS) && !defined(__OpenBSD__) && !defined(sgi) && !defined(__FreeBSD__) && !(defined(__bsdi) || defined(__bsdi__)) && !defined(_AIX) && !defined(MPE)
+#if !defined(_UNICOS) && !defined(__OpenBSD__) && !defined(sgi) && !defined(__FreeBSD__) && !(defined(__bsdi) || defined(__bsdi__)) && !defined(_AIX) && !defined(MPE) && !defined(__NetBSD__) && !defined(_DARWIN) && !defined(VXWORKS)
 # define TIMEB
 #endif
 
@@ -115,7 +115,7 @@
 #include <sys/timeb.h>
 #endif
 
-#if !defined(TIMES) && !defined(TIMEB) && !defined(USE_TOD)
+#if !defined(TIMES) && !defined(TIMEB) && !defined(USE_TOD) && !defined(VXWORKS)
 #error "It seems neither struct tms nor struct timeb is supported in this platform!"
 #endif
 
@@ -224,7 +224,7 @@ static double Time_F(int s, int usertime)
 
 #ifdef USE_TOD
 	if(usertime)
-	    {
+		{
 		static struct rusage tstart,tend;
 
 		if (s == START)
@@ -284,7 +284,23 @@ static double Time_F(int s, int usertime)
 # if defined(TIMES) && defined(TIMEB)
 	else
 # endif
-# ifdef TIMEB
+# ifdef VXWORKS
+		{
+		static unsigned long tick_start, tick_end;
+
+		if( s == START )
+			{
+			tick_start = tickGet();
+			return 0;
+			}
+		else
+			{
+			tick_end = tickGet();
+			ret = (double)(tick_end - tick_start) / (double)sysClkRateGet();
+			return((ret < 0.001)?0.001:ret);
+			}
+                }
+# elif defined(TIMEB)
 		{
 		static struct timeb tstart,tend;
 		long i;
@@ -303,6 +319,7 @@ static double Time_F(int s, int usertime)
 			}
 		}
 # endif
+
 #endif
 	}
 
@@ -318,7 +335,9 @@ int MAIN(int argc, char **argv)
 #define DSA_NUM		3
 	long count,rsa_count;
 	int i,j,k;
+#ifndef NO_RSA
 	unsigned rsa_num;
+#endif
 #ifndef NO_MD2
 	unsigned char md2[MD2_DIGEST_LENGTH];
 #endif
@@ -670,7 +689,7 @@ int MAIN(int argc, char **argv)
 			BIO_printf(bio_err,"\n");
 #endif
 
-#ifdef TIMES
+#if defined(TIMES) || defined(USE_TOD)
 			BIO_printf(bio_err,"\n");
 			BIO_printf(bio_err,"Available options:\n");
 			BIO_printf(bio_err,"-elapsed        measure time in real time instead of CPU user time.\n");
@@ -831,6 +850,7 @@ int MAIN(int argc, char **argv)
 		}
 #endif
 
+#ifndef NO_DSA
 	dsa_c[R_DSA_512][0]=count/1000;
 	dsa_c[R_DSA_512][1]=count/1000/2;
 	for (i=1; i<DSA_NUM; i++)
@@ -848,6 +868,7 @@ int MAIN(int argc, char **argv)
 				}
 			}				
 		}
+#endif
 
 #define COND(d)	(count < (d))
 #define COUNT(d) (d)
@@ -1173,7 +1194,7 @@ int MAIN(int argc, char **argv)
 			{
 			BIO_printf(bio_err,"RSA verify failure.  No RSA verify will be done.\n");
 			ERR_print_errors(bio_err);
-			dsa_doit[j] = 0;
+			rsa_doit[j] = 0;
 			}
 		else
 			{
@@ -1391,7 +1412,7 @@ end:
 		if (dsa_key[i] != NULL)
 			DSA_free(dsa_key[i]);
 #endif
-	EXIT(mret);
+	OPENSSL_EXIT(mret);
 	}
 
 static void print_message(char *s, long num, int length)

apps/spkac.c

@@ -288,5 +288,5 @@ end:
 	BIO_free(key);
 	EVP_PKEY_free(pkey);
 	if(passin) OPENSSL_free(passin);
-	EXIT(ret);
+	OPENSSL_EXIT(ret);
 	}

apps/verify.c

@@ -213,7 +213,7 @@ end:
 	if (cert_ctx != NULL) X509_STORE_free(cert_ctx);
 	sk_X509_pop_free(untrusted, X509_free);
 	sk_X509_pop_free(trusted, X509_free);
-	EXIT(ret);
+	OPENSSL_EXIT(ret);
 	}
 
 static int check(X509_STORE *ctx, char *file, STACK_OF(X509) *uchain, STACK_OF(X509) *tchain, int purpose)

apps/version.c

@@ -128,5 +128,5 @@ int MAIN(int argc, char **argv)
 		}
 	if (cflags)  printf("%s\n",SSLeay_version(SSLEAY_CFLAGS));
 end:
-	EXIT(ret);
+	OPENSSL_EXIT(ret);
 	}

apps/x509.c

@@ -121,7 +121,7 @@ static char *x509_usage[]={
 " -CAkey arg      - set the CA key, must be PEM format\n",
 "                   missing, it is assumed to be in the CA file.\n",
 " -CAcreateserial - create serial number file if it does not exist\n",
-" -CAserial       - serial file\n",
+" -CAserial arg   - serial file\n",
 " -text           - print the certificate in text form\n",
 " -C              - print out C code forms\n",
 " -md2/-md5/-sha1/-mdc2 - digest to use\n",
@@ -233,7 +233,7 @@ int MAIN(int argc, char **argv)
 		else if (strcmp(*argv,"-CAkeyform") == 0)
 			{
 			if (--argc < 1) goto bad;
-			CAformat=str2fmt(*(++argv));
+			CAkeyformat=str2fmt(*(++argv));
 			}
 		else if (strcmp(*argv,"-days") == 0)
 			{
@@ -447,7 +447,7 @@ bad:
 
 	if (extfile)
 		{
-		long errorline;
+		long errorline = -1;
 		X509V3_CTX ctx2;
 		if (!(extconf=CONF_load(NULL,extfile,&errorline)))
 			{
@@ -867,8 +867,10 @@ bad:
 
 				BIO_printf(bio_err,"Generating certificate request\n");
 
+#ifndef NO_DSA
 		                if (pk->type == EVP_PKEY_DSA)
 		                        digest=EVP_dss1();
+#endif
 
 				rq=X509_to_X509_REQ(x,pk,digest);
 				EVP_PKEY_free(pk);
@@ -959,7 +961,7 @@ end:
 	sk_ASN1_OBJECT_pop_free(trust, ASN1_OBJECT_free);
 	sk_ASN1_OBJECT_pop_free(reject, ASN1_OBJECT_free);
 	if (passin) OPENSSL_free(passin);
-	EXIT(ret);
+	OPENSSL_EXIT(ret);
 	}
 
 static int x509_certify(X509_STORE *ctx, char *CAfile, const EVP_MD *digest,

config

@@ -49,10 +49,18 @@ if [ "x$XREL" != "x" ]; then
 		echo "whatever-whatever-sco5"; exit 0
 		;;
 	    4.2MP)
-		if [ "x$VERSION" = "x2.1.1" ]; then
+		if [ "x$VERSION" = "x2.01" ]; then
+		    echo "${MACHINE}-whatever-unixware201"; exit 0
+		elif [ "x$VERSION" = "x2.02" ]; then
+		    echo "${MACHINE}-whatever-unixware202"; exit 0
+		elif [ "x$VERSION" = "x2.03" ]; then
+		    echo "${MACHINE}-whatever-unixware203"; exit 0
+		elif [ "x$VERSION" = "x2.1.1" ]; then
 		    echo "${MACHINE}-whatever-unixware211"; exit 0
 		elif [ "x$VERSION" = "x2.1.2" ]; then
 		    echo "${MACHINE}-whatever-unixware212"; exit 0
+		elif [ "x$VERSION" = "x2.1.3" ]; then
+		    echo "${MACHINE}-whatever-unixware213"; exit 0
 		else
 		    echo "${MACHINE}-whatever-unixware2"; exit 0
 		fi
@@ -60,6 +68,11 @@ if [ "x$XREL" != "x" ]; then
 	    4.2)
 		echo "whatever-whatever-unixware1"; exit 0
 		;;
+     OpenUNIX)
+		if [ "`echo x$VERSION | sed -e 's/\..*//'`" = "x8" ]; then
+		    echo "${MACHINE}-unknown-OpenUNIX${VERSION}"; exit 0
+		fi
+		;;
 	    5)
 		if [ "`echo x$VERSION | sed -e 's/\..*//'`" = "x7" ]; then
 		    echo "${MACHINE}-sco-unixware7"; exit 0
@@ -79,6 +92,14 @@ case "${SYSTEM}:${RELEASE}:${VERSION}:${MACHINE}" in
 	echo "m68k-apple-aux3"; exit 0
 	;;
 
+    AIX:[3456789]:4:*)
+	echo "${MACHINE}-ibm-aix43"; exit 0
+	;;
+
+    AIX:*:[56789]:*)
+	echo "${MACHINE}-ibm-aix43"; exit 0
+	;;
+
     AIX:*)
 	echo "${MACHINE}-ibm-aix"; exit 0
 	;;
@@ -168,7 +189,7 @@ case "${SYSTEM}:${RELEASE}:${VERSION}:${MACHINE}" in
         ;;
 
     NetBSD:*:*:*386*)
-        echo "`/usr/sbin/sysctl -n hw.model | sed 's,.*\(.\)86-class.*,i\186,'`-whatever-netbsd"; exit 0
+        echo "`(/usr/sbin/sysctl -n hw.model || /sbin/sysctl -n hw.model) | sed 's,.*\(.\)86-class.*,i\186,'`-whatever-netbsd"; exit 0
 	;;
 
     NetBSD:*)
@@ -179,15 +200,33 @@ case "${SYSTEM}:${RELEASE}:${VERSION}:${MACHINE}" in
 	echo "${MACHINE}-whatever-openbsd"; exit 0
 	;;
 
+    OpenUNIX:*)
+	echo "${MACHINE}-unknown-OpenUNIX${VERSION}"; exit 0
+	;;
+
     OSF1:*:*:*alpha*)
-	echo "${MACHINE}-dec-osf"; exit 0
+	OSFMAJOR=`echo ${RELEASE}| sed -e 's/^V\([0-9]*\)\..*$/\1/'`
+	case "$OSFMAJOR" in
+	    4|5)
+		echo "${MACHINE}-dec-tru64"; exit 0
+		;;
+	    1|2|3)
+		echo "${MACHINE}-dec-osf"; exit 0
+		;;
+	    *)
+		echo "${MACHINE}-dec-osf"; exit 0
+		;;
+	esac
 	;;
 
     QNX:*)
-	case "$VERSION" in
+	case "$RELEASE" in
 	    4*)
 		echo "${MACHINE}-whatever-qnx4"
 		;;
+	    6*)
+		echo "${MACHINE}-whatever-qnx6"
+		;;
 	    *)
 		echo "${MACHINE}-whatever-qnx"
 		;;
@@ -203,6 +242,10 @@ case "${SYSTEM}:${RELEASE}:${VERSION}:${MACHINE}" in
 	echo "ppc-apple-rhapsody"; exit 0
 	;;
 
+    Darwin:*)
+	echo "ppc-apple-darwin"; exit 0
+	;;
+
     SunOS:5.*)
 	echo "${MACHINE}-whatever-solaris2"; exit 0
 	;;
@@ -255,6 +298,29 @@ case "${SYSTEM}:${RELEASE}:${VERSION}:${MACHINE}" in
 	echo "mips-sony-newsos4"; exit 0;
 	;;
 
+    CYGWIN*)
+	case "$RELEASE" in
+	    [bB]*|1.0|1.[12].*)
+		echo "${MACHINE}-whatever-cygwin_pre1.3"
+		;;
+	    *)
+		echo "${MACHINE}-whatever-cygwin"
+		;;
+	esac
+	exit 0
+	;;
+
+    *"CRAY T3E")
+       echo "t3e-cray-unicosmk"; exit 0;
+       ;;
+
+    *CRAY*)
+       echo "j90-cray-unicos"; exit 0;
+       ;;
+
+    NONSTOP_KERNEL*)
+       echo "nsr-tandem-nsk"; exit 0;
+       ;;
 esac
 
 #
@@ -319,17 +385,33 @@ done
 
 # figure out if gcc is available and if so we use it otherwise
 # we fallback to whatever cc does on the system
-GCCVER=`(gcc --version) 2>/dev/null`
+GCCVER=`(gcc -dumpversion) 2>/dev/null`
 if [ "$GCCVER" != "" ]; then
   CC=gcc
-  # then strip off whatever prefix Cygnus prepends the number with...
-  GCCVER=`echo $GCCVER | sed 's/^[a-z]*\-//'`
+  # then strip off whatever prefix egcs prepends the number with...
+  # Hopefully, this will work for any future prefixes as well.
+  GCCVER=`echo $GCCVER | sed 's/^[a-zA-Z]*\-//'`
+  # Since gcc 3.1 gcc --version behaviour has changed.  gcc -dumpversion
+  # does give us what we want though, so we use that.  We just just the
+  # major and minor version numbers.
   # peak single digit before and after first dot, e.g. 2.95.1 gives 29
   GCCVER=`echo $GCCVER | sed 's/\([0-9]\)\.\([0-9]\).*/\1\2/'`
 else
   CC=cc
 fi
-
+GCCVER=${GCCVER:-0}
+if [ "$SYSTEM" = "HP-UX" ];then
+  # By default gcc is a ILP32 compiler (with long long == 64).
+  GCC_BITS="32"
+  if [ $GCCVER -ge 30 ]; then
+    # PA64 support only came in with gcc 3.0.x.
+    # We look for the preprocessor symbol __LP64__ indicating
+    # 64bit bit long and pointer.  sizeof(int) == 32 on HPUX64.
+    if gcc -v -E -x c /dev/null 2>&1 | grep __LP64__ > /dev/null; then
+      GCC_BITS="64"
+    fi
+  fi
+fi
 if [ "$SYSTEM" = "SunOS" ]; then
   # check for WorkShop C, expected output is "cc: blah-blah C x.x"
   CCVER=`(cc -V 2>&1) 2>/dev/null | \
@@ -393,10 +475,17 @@ case "$GUESSOS" in
 	;;
   mips4-sgi-irix64)
 	echo "WARNING! If you wish to build 64-bit library, then you have to"
-	echo "         invoke './Configre irix64-mips4-$CC' *manually*."
-	echo "         Type Ctrl-C if you don't want to continue."
-	read waste < /dev/tty
-	options="$options -mips4"
+	echo "         invoke './Configure irix64-mips4-$CC' *manually*."
+	echo "         Type return if you want to continue, Ctrl-C to abort."
+	# Do not stop if /dev/tty is unavailable
+	(read waste < /dev/tty) || true
+        CPU=`(hinv -t cpu) 2>/dev/null | sed 's/^CPU:[^R]*R\([0-9]*\).*/\1/'`
+        CPU=${CPU:-0}
+        if [ $CPU -ge 5000 ]; then
+                options="$options -mips4"
+        else
+                options="$options -mips3"
+        fi
 	OUT="irix-mips3-$CC"
 	;;
   alpha-*-linux2)
@@ -413,28 +502,71 @@ case "$GUESSOS" in
 	    esac
 	fi
 	;;
-  mips-*-linux?) OUT="linux-mips" ;;
+  mips-*-linux?)
+          cat >dummy.c <<EOF
+#include <stdio.h>  /* for printf() prototype */
+        int main (argc, argv) int argc; char *argv[]; {
+#ifdef __MIPSEB__
+  printf ("linux-%s\n", argv[1]);
+#endif
+#ifdef __MIPSEL__
+  printf ("linux-%sel\n", argv[1]);
+#endif
+  return 0;
+}
+EOF
+	${CC} -o dummy dummy.c && OUT=`./dummy ${MACHINE}`
+	rm dummy dummy.c
+	;;
+  ppc64-*-linux2)
+	#Use the standard target for PPC architecture until we create a
+	#special one for the 64bit architecture.
+	OUT="linux-ppc" ;;
   ppc-*-linux2) OUT="linux-ppc" ;;
   m68k-*-linux*) OUT="linux-m68k" ;;
   ia64-*-linux?) OUT="linux-ia64" ;;
   ppc-apple-rhapsody) OUT="rhapsody-ppc-cc" ;;
+  ppc-apple-darwin) OUT="darwin-ppc-cc" ;;
   sparc64-*-linux2)
 	#Before we can uncomment following lines we have to wait at least
 	#till 64-bit glibc for SPARC is operational:-(
 	#echo "WARNING! If you wish to build 64-bit library, then you have to"
 	#echo "         invoke './Configure linux64-sparcv9' *manually*."
-	#echo "         Type Ctrl-C if you don't want to continue."
-	#read waste < /dev/tty
+	#echo "         Type return if you want to continue, Ctrl-C to abort."
+	# Do not stop if /dev/tty is unavailable
+	#(read waste < /dev/tty) || true
 	OUT="linux-sparcv9" ;;
   sparc-*-linux2)
-	KARCH=`awk '/type/{print$3}' /proc/cpuinfo`
+	KARCH=`awk '/^type/{print$3}' /proc/cpuinfo`
 	case ${KARCH:-sun4} in
 	sun4u*)	OUT="linux-sparcv9" ;;
 	sun4m)	OUT="linux-sparcv8" ;;
 	sun4d)	OUT="linux-sparcv8" ;;
 	*)	OUT="linux-sparcv7" ;;
 	esac ;;
+  parisc-*-linux2)
+        CPUARCH=`awk '/cpu family/{print substr($5,1,3)}' /proc/cpuinfo`
+	CPUSCHEDULE=`awk '/^cpu.[ 	]: PA/{print substr($3,3)}' /proc/cpuinfo`
+
+	# ??TODO ??  Model transformations
+	# 0. CPU Architecture for the 1.1 processor has letter suffixes. We strip that off
+	#    assuming no further arch. identification will ever be used by GCC.
+	# 1. I'm most concerned about whether is a 7300LC is closer to a 7100 versus a 7100LC.
+	# 2. The variant 64-bit processors cause concern should GCC support explicit schedulers
+	#    for these chips in the future.
+	#         PA7300LC -> 7100LC (1.1)
+	#         PA8200   -> 8000   (2.0)
+	#         PA8500   -> 8000   (2.0)
+	#         PA8600   -> 8000   (2.0)
+
+	CPUSCHEDULE=`echo $CPUSCHEDULE|sed -e 's/7300LC/7100LC/' -e 's/8?00/8000/'`
+	# Finish Model transformations
+
+	options="$options -mschedule=$CPUSCHEDULE -march=$CPUARCH"
+	OUT="linux-parisc" ;;
   arm*-*-linux2) OUT="linux-elf-arm" ;;
+  s390-*-linux2) OUT="linux-s390" ;;
+  s390x-*-linux?) OUT="linux-s390x" ;;
   *-*-linux2) OUT="linux-elf" ;;
   *-*-linux1) OUT="linux-aout" ;;
   sun4u*-*-solaris2)
@@ -442,8 +574,9 @@ case "$GUESSOS" in
 	if [ "$ISA64" != "" -a "$CC" = "cc" -a $CCVER -ge 50 ]; then
 		echo "WARNING! If you wish to build 64-bit library, then you have to"
 		echo "         invoke './Configure solaris64-sparcv9-cc' *manually*."
-		echo "         Type Ctrl-C if you don't want to continue."
-		read waste < /dev/tty
+		echo "         Type return if you want to continue, Ctrl-C to abort."
+		# Do not stop if /dev/tty is unavailable
+		(read waste < /dev/tty) || true
 	fi
 	OUT="solaris-sparcv9-$CC" ;;
   sun4m-*-solaris2)	OUT="solaris-sparcv8-$CC" ;;
@@ -462,23 +595,49 @@ case "$GUESSOS" in
   pmax*-*-openbsd) OUT="OpenBSD-mips" ;;
   *-*-openbsd) OUT="OpenBSD" ;;
   *86*-*-bsdi4) OUT="bsdi-elf-gcc" ;;
-  *-*-osf) OUT="alpha-cc" ;;
+  *-*-osf) OUT="alphaold-cc" ;;
+  *-*-tru64) OUT="alpha-cc" ;;
+  *-*-OpenUNIX*)
+	if [ "$CC" = "gcc" ]; then
+	  OUT="OpenUNIX-8-gcc" 
+	else    
+	  OUT="OpenUNIX-8" 
+	fi
+	;;
   *-*-unixware7) OUT="unixware-7" ;;
   *-*-UnixWare7) OUT="unixware-7" ;;
   *-*-Unixware7) OUT="unixware-7" ;;
-  *-*-unixware[1-2]*) OUT="unixware-2.0" ;;
-  *-*-UnixWare[1-2]*) OUT="unixware-2.0" ;;
-  *-*-Unixware[1-2]*) OUT="unixware-2.0" ;;
+  *-*-unixware20*) OUT="unixware-2.0" ;;
+  *-*-unixware21*) OUT="unixware-2.1" ;;
+  *-*-UnixWare20*) OUT="unixware-2.0" ;;
+  *-*-UnixWare21*) OUT="unixware-2.1" ;;
+  *-*-Unixware20*) OUT="unixware-2.0" ;;
+  *-*-Unixware21*) OUT="unixware-2.1" ;;
   BS2000-siemens-sysv4) OUT="BS2000-OSD" ;;
   RM*-siemens-sysv4) OUT="ReliantUNIX" ;;
   *-siemens-sysv4) OUT="SINIX" ;;
-  *-hpux1*)	OUT="hpux-parisc-$CC"
-		options="$options -D_REENTRANT" ;;
+  *-hpux1*)
+	if [ $CC = "gcc" ];
+	then
+	  if [ $GCC_BITS = "64" ]; then
+	    OUT="hpux64-parisc-gcc"
+	  else
+	    OUT="hpux-parisc-gcc"
+	  fi
+	else
+	  OUT="hpux-parisc-$CC"
+	fi
+	options="$options -D_REENTRANT" ;;
   *-hpux)	OUT="hpux-parisc-$CC" ;;
   # these are all covered by the catchall below
   # *-aix) OUT="aix-$CC" ;;
   # *-dgux) OUT="dgux" ;;
   mips-sony-newsos4) OUT="newsos4-gcc" ;;
+  *-*-cygwin_pre1.3) OUT="Cygwin-pre1.3" ;;
+  *-*-cygwin) OUT="Cygwin" ;;
+  t3e-cray-unicosmk) OUT="cray-t3e" ;;
+  j90-cray-unicos) OUT="cray-j90" ;;
+  nsr-tandem-nsk) OUT="tandem-c89" ;;
   *) OUT=`echo $GUESSOS | awk -F- '{print $3}'`;;
 esac
 
@@ -507,7 +666,7 @@ case "$GUESSOS" in
   i386-*) options="$options 386" ;;
 esac
 
-for i in bf cast des dh dsa hmac md2 md5 mdc2 rc2 rc4 rc5 ripemd rsa sha
+for i in bf cast des dh dsa hmac idea md2 md5 mdc2 rc2 rc4 rc5 ripemd rsa sha
 do
   if [ ! -d crypto/$i ]
   then
@@ -557,7 +716,7 @@ OUT="$PREFIX$OUT"
 
 $PERL ./Configure LIST | grep "$OUT" > /dev/null
 if [ $? = "0" ]; then
-  #echo Configuring for $OUT
+  echo Configuring for $OUT
 
   if [ "$TEST" = "true" ]; then
     echo $PERL ./Configure $OUT $options

crypto/Makefile.ssl

@@ -6,7 +6,7 @@ DIR=		crypto
 TOP=		..
 CC=		cc
 INCLUDE=	-I. -I../include
-INCLUDES=	-I.. -I../../include
+INCLUDES=	-I.. -I../.. -I../../include
 CFLAG=		-g
 INSTALL_PREFIX=
 OPENSSLDIR=     /usr/local/ssl
@@ -34,8 +34,8 @@ SDIRS=	md2 md5 sha mdc2 hmac ripemd \
 GENERAL=Makefile README crypto-lib.com install.com
 
 LIB= $(TOP)/libcrypto.a
-LIBSRC=	cryptlib.c mem.c mem_dbg.c cversion.c ex_data.c tmdiff.c cpt_err.c ebcdic.c
-LIBOBJ= cryptlib.o mem.o mem_dbg.o cversion.o ex_data.o tmdiff.o cpt_err.o ebcdic.o
+LIBSRC=	cryptlib.c mem.c mem_clr.c mem_dbg.c cversion.c ex_data.c tmdiff.c cpt_err.c ebcdic.c uid.c
+LIBOBJ= cryptlib.o mem.o mem_clr.o mem_dbg.o cversion.o ex_data.o tmdiff.o cpt_err.o ebcdic.o uid.o
 
 SRC= $(LIBSRC)
 
@@ -51,11 +51,11 @@ all: buildinf.h lib subdirs
 
 buildinf.h: ../Makefile.ssl
 	( echo "#ifndef MK1MF_BUILD"; \
-	echo "  /* auto-generated by crypto/Makefile.ssl for crypto/cversion.c */"; \
-	echo "  #define CFLAGS \"$(CC) $(CFLAG)\""; \
-	echo "  #define PLATFORM \"$(PLATFORM)\""; \
-	echo "  #define DATE \"`date`\""; \
-	echo "#endif" ) >buildinf.h
+	echo '  /* auto-generated by crypto/Makefile.ssl for crypto/cversion.c */'; \
+	echo '  #define CFLAGS "$(CC) $(CFLAG)"'; \
+	echo '  #define PLATFORM "$(PLATFORM)"'; \
+	echo "  #define DATE \"`LC_ALL=C LC_TIME=C date`\""; \
+	echo '#endif' ) >buildinf.h
 
 testapps:
 	if echo ${SDIRS} | fgrep ' des '; \
@@ -90,7 +90,8 @@ links:
 
 lib:	$(LIBOBJ)
 	$(AR) $(LIB) $(LIBOBJ)
-	$(RANLIB) $(LIB)
+	@echo You may get an error following this line.  Please ignore.
+	- $(RANLIB) $(LIB)
 	@touch lib
 
 libs:
@@ -128,12 +129,12 @@ lint:
 
 depend:
 	if [ ! -f buildinf.h ]; then touch buildinf.h; fi # fake buildinf.h if it does not exist
-	$(MAKEDEPEND) $(INCLUDE) $(DEPFLAG) $(PROGS) $(LIBSRC)
+	$(MAKEDEPEND) -- $(INCLUDE) $(DEPFLAG) -- $(PROGS) $(LIBSRC)
 	if [ ! -s buildinf.h ]; then rm buildinf.h; fi
 	@for i in $(SDIRS) ;\
 	do \
 	(cd $$i; echo "making depend in crypto/$$i..."; \
-	$(MAKE) MAKEFILE='${MAKEFILE}' INCLUDES='${INCLUDES}' DEPFLAG='${DEPFLAG}' depend ); \
+	$(MAKE) MAKEFILE='${MAKEFILE}' INCLUDES='${INCLUDES}' DEPFLAG='${DEPFLAG}' PERL='${PERL}' depend ); \
 	done;
 
 clean:
@@ -184,6 +185,9 @@ mem.o: ../include/openssl/e_os2.h ../include/openssl/err.h
 mem.o: ../include/openssl/lhash.h ../include/openssl/opensslconf.h
 mem.o: ../include/openssl/opensslv.h ../include/openssl/safestack.h
 mem.o: ../include/openssl/stack.h ../include/openssl/symhacks.h cryptlib.h
+mem_clr.o: ../include/openssl/crypto.h ../include/openssl/opensslv.h
+mem_clr.o: ../include/openssl/safestack.h ../include/openssl/stack.h
+mem_clr.o: ../include/openssl/symhacks.h
 mem_dbg.o: ../include/openssl/bio.h ../include/openssl/buffer.h
 mem_dbg.o: ../include/openssl/crypto.h ../include/openssl/e_os.h
 mem_dbg.o: ../include/openssl/e_os2.h ../include/openssl/err.h
@@ -197,3 +201,6 @@ tmdiff.o: ../include/openssl/lhash.h ../include/openssl/opensslconf.h
 tmdiff.o: ../include/openssl/opensslv.h ../include/openssl/safestack.h
 tmdiff.o: ../include/openssl/stack.h ../include/openssl/symhacks.h
 tmdiff.o: ../include/openssl/tmdiff.h cryptlib.h
+uid.o: ../include/openssl/crypto.h ../include/openssl/opensslv.h
+uid.o: ../include/openssl/safestack.h ../include/openssl/stack.h
+uid.o: ../include/openssl/symhacks.h

crypto/asn1/Makefile.ssl

@@ -75,7 +75,8 @@ all:	lib
 
 lib:	$(LIBOBJ)
 	$(AR) $(LIB) $(LIBOBJ)
-	$(RANLIB) $(LIB)
+	@echo You may get an error following this line.  Please ignore.
+	- $(RANLIB) $(LIB)
 	@touch lib
 
 files:
@@ -103,7 +104,7 @@ lint:
 	lint -DLINT $(INCLUDES) $(SRC)>fluff
 
 depend:
-	$(MAKEDEPEND) $(INCLUDES) $(DEPFLAG) $(PROGS) $(LIBSRC)
+	$(MAKEDEPEND) -- $(INCLUDES) $(DEPFLAG) -- $(PROGS) $(LIBSRC)
 
 dclean:
 	$(PERL) -pe 'if (/^# DO NOT DELETE THIS LINE/) {print; exit(0);}' $(MAKEFILE) >Makefile.new
@@ -935,40 +936,40 @@ t_bitst.o: ../../include/openssl/buffer.h ../../include/openssl/cast.h
 t_bitst.o: ../../include/openssl/conf.h ../../include/openssl/crypto.h
 t_bitst.o: ../../include/openssl/des.h ../../include/openssl/dh.h
 t_bitst.o: ../../include/openssl/dsa.h ../../include/openssl/e_os.h
-t_bitst.o: ../../include/openssl/e_os.h ../../include/openssl/e_os2.h
-t_bitst.o: ../../include/openssl/err.h ../../include/openssl/evp.h
-t_bitst.o: ../../include/openssl/idea.h ../../include/openssl/lhash.h
-t_bitst.o: ../../include/openssl/md2.h ../../include/openssl/md4.h
-t_bitst.o: ../../include/openssl/md5.h ../../include/openssl/mdc2.h
-t_bitst.o: ../../include/openssl/obj_mac.h ../../include/openssl/objects.h
-t_bitst.o: ../../include/openssl/opensslconf.h ../../include/openssl/opensslv.h
-t_bitst.o: ../../include/openssl/pkcs7.h ../../include/openssl/rc2.h
-t_bitst.o: ../../include/openssl/rc4.h ../../include/openssl/rc5.h
-t_bitst.o: ../../include/openssl/ripemd.h ../../include/openssl/rsa.h
-t_bitst.o: ../../include/openssl/safestack.h ../../include/openssl/sha.h
-t_bitst.o: ../../include/openssl/stack.h ../../include/openssl/symhacks.h
-t_bitst.o: ../../include/openssl/x509.h ../../include/openssl/x509_vfy.h
-t_bitst.o: ../../include/openssl/x509v3.h ../cryptlib.h
+t_bitst.o: ../../include/openssl/e_os2.h ../../include/openssl/err.h
+t_bitst.o: ../../include/openssl/evp.h ../../include/openssl/idea.h
+t_bitst.o: ../../include/openssl/lhash.h ../../include/openssl/md2.h
+t_bitst.o: ../../include/openssl/md4.h ../../include/openssl/md5.h
+t_bitst.o: ../../include/openssl/mdc2.h ../../include/openssl/obj_mac.h
+t_bitst.o: ../../include/openssl/objects.h ../../include/openssl/opensslconf.h
+t_bitst.o: ../../include/openssl/opensslv.h ../../include/openssl/pkcs7.h
+t_bitst.o: ../../include/openssl/rc2.h ../../include/openssl/rc4.h
+t_bitst.o: ../../include/openssl/rc5.h ../../include/openssl/ripemd.h
+t_bitst.o: ../../include/openssl/rsa.h ../../include/openssl/safestack.h
+t_bitst.o: ../../include/openssl/sha.h ../../include/openssl/stack.h
+t_bitst.o: ../../include/openssl/symhacks.h ../../include/openssl/x509.h
+t_bitst.o: ../../include/openssl/x509_vfy.h ../../include/openssl/x509v3.h
+t_bitst.o: ../cryptlib.h
 t_crl.o: ../../include/openssl/asn1.h ../../include/openssl/bio.h
 t_crl.o: ../../include/openssl/blowfish.h ../../include/openssl/bn.h
 t_crl.o: ../../include/openssl/buffer.h ../../include/openssl/cast.h
 t_crl.o: ../../include/openssl/conf.h ../../include/openssl/crypto.h
 t_crl.o: ../../include/openssl/des.h ../../include/openssl/dh.h
 t_crl.o: ../../include/openssl/dsa.h ../../include/openssl/e_os.h
-t_crl.o: ../../include/openssl/e_os.h ../../include/openssl/e_os2.h
-t_crl.o: ../../include/openssl/err.h ../../include/openssl/evp.h
-t_crl.o: ../../include/openssl/idea.h ../../include/openssl/lhash.h
-t_crl.o: ../../include/openssl/md2.h ../../include/openssl/md4.h
-t_crl.o: ../../include/openssl/md5.h ../../include/openssl/mdc2.h
-t_crl.o: ../../include/openssl/obj_mac.h ../../include/openssl/objects.h
-t_crl.o: ../../include/openssl/opensslconf.h ../../include/openssl/opensslv.h
-t_crl.o: ../../include/openssl/pkcs7.h ../../include/openssl/rc2.h
-t_crl.o: ../../include/openssl/rc4.h ../../include/openssl/rc5.h
-t_crl.o: ../../include/openssl/ripemd.h ../../include/openssl/rsa.h
-t_crl.o: ../../include/openssl/safestack.h ../../include/openssl/sha.h
-t_crl.o: ../../include/openssl/stack.h ../../include/openssl/symhacks.h
-t_crl.o: ../../include/openssl/x509.h ../../include/openssl/x509_vfy.h
-t_crl.o: ../../include/openssl/x509v3.h ../cryptlib.h
+t_crl.o: ../../include/openssl/e_os2.h ../../include/openssl/err.h
+t_crl.o: ../../include/openssl/evp.h ../../include/openssl/idea.h
+t_crl.o: ../../include/openssl/lhash.h ../../include/openssl/md2.h
+t_crl.o: ../../include/openssl/md4.h ../../include/openssl/md5.h
+t_crl.o: ../../include/openssl/mdc2.h ../../include/openssl/obj_mac.h
+t_crl.o: ../../include/openssl/objects.h ../../include/openssl/opensslconf.h
+t_crl.o: ../../include/openssl/opensslv.h ../../include/openssl/pkcs7.h
+t_crl.o: ../../include/openssl/rc2.h ../../include/openssl/rc4.h
+t_crl.o: ../../include/openssl/rc5.h ../../include/openssl/ripemd.h
+t_crl.o: ../../include/openssl/rsa.h ../../include/openssl/safestack.h
+t_crl.o: ../../include/openssl/sha.h ../../include/openssl/stack.h
+t_crl.o: ../../include/openssl/symhacks.h ../../include/openssl/x509.h
+t_crl.o: ../../include/openssl/x509_vfy.h ../../include/openssl/x509v3.h
+t_crl.o: ../cryptlib.h
 t_pkey.o: ../../include/openssl/bio.h ../../include/openssl/bn.h
 t_pkey.o: ../../include/openssl/buffer.h ../../include/openssl/crypto.h
 t_pkey.o: ../../include/openssl/dh.h ../../include/openssl/dsa.h
@@ -984,20 +985,20 @@ t_req.o: ../../include/openssl/buffer.h ../../include/openssl/cast.h
 t_req.o: ../../include/openssl/conf.h ../../include/openssl/crypto.h
 t_req.o: ../../include/openssl/des.h ../../include/openssl/dh.h
 t_req.o: ../../include/openssl/dsa.h ../../include/openssl/e_os.h
-t_req.o: ../../include/openssl/e_os.h ../../include/openssl/e_os2.h
-t_req.o: ../../include/openssl/err.h ../../include/openssl/evp.h
-t_req.o: ../../include/openssl/idea.h ../../include/openssl/lhash.h
-t_req.o: ../../include/openssl/md2.h ../../include/openssl/md4.h
-t_req.o: ../../include/openssl/md5.h ../../include/openssl/mdc2.h
-t_req.o: ../../include/openssl/obj_mac.h ../../include/openssl/objects.h
-t_req.o: ../../include/openssl/opensslconf.h ../../include/openssl/opensslv.h
-t_req.o: ../../include/openssl/pkcs7.h ../../include/openssl/rc2.h
-t_req.o: ../../include/openssl/rc4.h ../../include/openssl/rc5.h
-t_req.o: ../../include/openssl/ripemd.h ../../include/openssl/rsa.h
-t_req.o: ../../include/openssl/safestack.h ../../include/openssl/sha.h
-t_req.o: ../../include/openssl/stack.h ../../include/openssl/symhacks.h
-t_req.o: ../../include/openssl/x509.h ../../include/openssl/x509_vfy.h
-t_req.o: ../../include/openssl/x509v3.h ../cryptlib.h
+t_req.o: ../../include/openssl/e_os2.h ../../include/openssl/err.h
+t_req.o: ../../include/openssl/evp.h ../../include/openssl/idea.h
+t_req.o: ../../include/openssl/lhash.h ../../include/openssl/md2.h
+t_req.o: ../../include/openssl/md4.h ../../include/openssl/md5.h
+t_req.o: ../../include/openssl/mdc2.h ../../include/openssl/obj_mac.h
+t_req.o: ../../include/openssl/objects.h ../../include/openssl/opensslconf.h
+t_req.o: ../../include/openssl/opensslv.h ../../include/openssl/pkcs7.h
+t_req.o: ../../include/openssl/rc2.h ../../include/openssl/rc4.h
+t_req.o: ../../include/openssl/rc5.h ../../include/openssl/ripemd.h
+t_req.o: ../../include/openssl/rsa.h ../../include/openssl/safestack.h
+t_req.o: ../../include/openssl/sha.h ../../include/openssl/stack.h
+t_req.o: ../../include/openssl/symhacks.h ../../include/openssl/x509.h
+t_req.o: ../../include/openssl/x509_vfy.h ../../include/openssl/x509v3.h
+t_req.o: ../cryptlib.h
 t_spki.o: ../../include/openssl/asn1.h ../../include/openssl/asn1_mac.h
 t_spki.o: ../../include/openssl/bio.h ../../include/openssl/blowfish.h
 t_spki.o: ../../include/openssl/bn.h ../../include/openssl/buffer.h
@@ -1023,20 +1024,20 @@ t_x509.o: ../../include/openssl/buffer.h ../../include/openssl/cast.h
 t_x509.o: ../../include/openssl/conf.h ../../include/openssl/crypto.h
 t_x509.o: ../../include/openssl/des.h ../../include/openssl/dh.h
 t_x509.o: ../../include/openssl/dsa.h ../../include/openssl/e_os.h
-t_x509.o: ../../include/openssl/e_os.h ../../include/openssl/e_os2.h
-t_x509.o: ../../include/openssl/err.h ../../include/openssl/evp.h
-t_x509.o: ../../include/openssl/idea.h ../../include/openssl/lhash.h
-t_x509.o: ../../include/openssl/md2.h ../../include/openssl/md4.h
-t_x509.o: ../../include/openssl/md5.h ../../include/openssl/mdc2.h
-t_x509.o: ../../include/openssl/obj_mac.h ../../include/openssl/objects.h
-t_x509.o: ../../include/openssl/opensslconf.h ../../include/openssl/opensslv.h
-t_x509.o: ../../include/openssl/pkcs7.h ../../include/openssl/rc2.h
-t_x509.o: ../../include/openssl/rc4.h ../../include/openssl/rc5.h
-t_x509.o: ../../include/openssl/ripemd.h ../../include/openssl/rsa.h
-t_x509.o: ../../include/openssl/safestack.h ../../include/openssl/sha.h
-t_x509.o: ../../include/openssl/stack.h ../../include/openssl/symhacks.h
-t_x509.o: ../../include/openssl/x509.h ../../include/openssl/x509_vfy.h
-t_x509.o: ../../include/openssl/x509v3.h ../cryptlib.h
+t_x509.o: ../../include/openssl/e_os2.h ../../include/openssl/err.h
+t_x509.o: ../../include/openssl/evp.h ../../include/openssl/idea.h
+t_x509.o: ../../include/openssl/lhash.h ../../include/openssl/md2.h
+t_x509.o: ../../include/openssl/md4.h ../../include/openssl/md5.h
+t_x509.o: ../../include/openssl/mdc2.h ../../include/openssl/obj_mac.h
+t_x509.o: ../../include/openssl/objects.h ../../include/openssl/opensslconf.h
+t_x509.o: ../../include/openssl/opensslv.h ../../include/openssl/pkcs7.h
+t_x509.o: ../../include/openssl/rc2.h ../../include/openssl/rc4.h
+t_x509.o: ../../include/openssl/rc5.h ../../include/openssl/ripemd.h
+t_x509.o: ../../include/openssl/rsa.h ../../include/openssl/safestack.h
+t_x509.o: ../../include/openssl/sha.h ../../include/openssl/stack.h
+t_x509.o: ../../include/openssl/symhacks.h ../../include/openssl/x509.h
+t_x509.o: ../../include/openssl/x509_vfy.h ../../include/openssl/x509v3.h
+t_x509.o: ../cryptlib.h
 t_x509a.o: ../../include/openssl/asn1.h ../../include/openssl/asn1_mac.h
 t_x509a.o: ../../include/openssl/bio.h ../../include/openssl/blowfish.h
 t_x509a.o: ../../include/openssl/bn.h ../../include/openssl/buffer.h
@@ -1309,21 +1310,20 @@ x_x509.o: ../../include/openssl/bn.h ../../include/openssl/buffer.h
 x_x509.o: ../../include/openssl/cast.h ../../include/openssl/conf.h
 x_x509.o: ../../include/openssl/crypto.h ../../include/openssl/des.h
 x_x509.o: ../../include/openssl/dh.h ../../include/openssl/dsa.h
-x_x509.o: ../../include/openssl/e_os.h ../../include/openssl/e_os.h
-x_x509.o: ../../include/openssl/e_os2.h ../../include/openssl/err.h
-x_x509.o: ../../include/openssl/evp.h ../../include/openssl/idea.h
-x_x509.o: ../../include/openssl/lhash.h ../../include/openssl/md2.h
-x_x509.o: ../../include/openssl/md4.h ../../include/openssl/md5.h
-x_x509.o: ../../include/openssl/mdc2.h ../../include/openssl/obj_mac.h
-x_x509.o: ../../include/openssl/objects.h ../../include/openssl/opensslconf.h
-x_x509.o: ../../include/openssl/opensslv.h ../../include/openssl/pkcs7.h
-x_x509.o: ../../include/openssl/rc2.h ../../include/openssl/rc4.h
-x_x509.o: ../../include/openssl/rc5.h ../../include/openssl/ripemd.h
-x_x509.o: ../../include/openssl/rsa.h ../../include/openssl/safestack.h
-x_x509.o: ../../include/openssl/sha.h ../../include/openssl/stack.h
-x_x509.o: ../../include/openssl/symhacks.h ../../include/openssl/x509.h
-x_x509.o: ../../include/openssl/x509_vfy.h ../../include/openssl/x509v3.h
-x_x509.o: ../cryptlib.h
+x_x509.o: ../../include/openssl/e_os.h ../../include/openssl/e_os2.h
+x_x509.o: ../../include/openssl/err.h ../../include/openssl/evp.h
+x_x509.o: ../../include/openssl/idea.h ../../include/openssl/lhash.h
+x_x509.o: ../../include/openssl/md2.h ../../include/openssl/md4.h
+x_x509.o: ../../include/openssl/md5.h ../../include/openssl/mdc2.h
+x_x509.o: ../../include/openssl/obj_mac.h ../../include/openssl/objects.h
+x_x509.o: ../../include/openssl/opensslconf.h ../../include/openssl/opensslv.h
+x_x509.o: ../../include/openssl/pkcs7.h ../../include/openssl/rc2.h
+x_x509.o: ../../include/openssl/rc4.h ../../include/openssl/rc5.h
+x_x509.o: ../../include/openssl/ripemd.h ../../include/openssl/rsa.h
+x_x509.o: ../../include/openssl/safestack.h ../../include/openssl/sha.h
+x_x509.o: ../../include/openssl/stack.h ../../include/openssl/symhacks.h
+x_x509.o: ../../include/openssl/x509.h ../../include/openssl/x509_vfy.h
+x_x509.o: ../../include/openssl/x509v3.h ../cryptlib.h
 x_x509a.o: ../../include/openssl/asn1.h ../../include/openssl/asn1_mac.h
 x_x509a.o: ../../include/openssl/bio.h ../../include/openssl/blowfish.h
 x_x509a.o: ../../include/openssl/bn.h ../../include/openssl/buffer.h

crypto/asn1/a_bitstr.c

@@ -89,8 +89,6 @@ int i2c_ASN1_BIT_STRING(ASN1_BIT_STRING *a, unsigned char **pp)
 	if (a == NULL) return(0);
 
 	len=a->length;
-	ret=1+len;
-	if (pp == NULL) return(ret);
 
 	if (len > 0)
 		{
@@ -118,6 +116,10 @@ int i2c_ASN1_BIT_STRING(ASN1_BIT_STRING *a, unsigned char **pp)
 		}
 	else
 		bits=0;
+
+	ret=1+len;
+	if (pp == NULL) return(ret);
+
 	p= *pp;
 
 	*(p++)=(unsigned char)bits;
@@ -224,6 +226,7 @@ int ASN1_BIT_STRING_set_bit(ASN1_BIT_STRING *a, int n, int value)
 	w=n/8;
 	v=1<<(7-(n&0x07));
 	iv= ~v;
+	if (!value) v=0;
 
 	a->flags&= ~(ASN1_STRING_FLAG_BITS_LEFT|0x07); /* clear, set on write */
 

crypto/asn1/a_enum.c

@@ -205,7 +205,18 @@ ASN1_ENUMERATED *BN_to_ASN1_ENUMERATED(BIGNUM *bn, ASN1_ENUMERATED *ai)
 	else ret->type=V_ASN1_ENUMERATED;
 	j=BN_num_bits(bn);
 	len=((j == 0)?0:((j/8)+1));
-	ret->data=(unsigned char *)OPENSSL_malloc(len+4);
+	if (ret->length < len+4)
+		{
+		unsigned char *new_data=
+			OPENSSL_realloc(ret->data, len+4);
+		if (!new_data)
+			{
+			ASN1err(ASN1_F_BN_TO_ASN1_INTEGER,ERR_R_MALLOC_FAILURE);
+			goto err;
+			}
+		ret->data=new_data;
+		}
+
 	ret->length=BN_bn2bin(bn,ret->data);
 	return(ret);
 err:

crypto/asn1/a_gentm.c

@@ -203,7 +203,7 @@ ASN1_GENERALIZEDTIME *ASN1_GENERALIZEDTIME_set(ASN1_GENERALIZEDTIME *s,
 	if (s == NULL)
 		return(NULL);
 
-#if defined(THREADS) && !defined(WIN32)
+#if defined(THREADS) && !defined(WIN32) && ! defined(_DARWIN)
 	gmtime_r(&t,&data); /* should return &data, but doesn't on some systems, so we don't even look at the return value */
 	ts=&data;
 #else

crypto/asn1/a_int.c

@@ -451,7 +451,16 @@ ASN1_INTEGER *BN_to_ASN1_INTEGER(BIGNUM *bn, ASN1_INTEGER *ai)
 	else ret->type=V_ASN1_INTEGER;
 	j=BN_num_bits(bn);
 	len=((j == 0)?0:((j/8)+1));
-	ret->data=(unsigned char *)OPENSSL_malloc(len+4);
+	if (ret->length < len+4)
+		{
+		unsigned char *new_data= OPENSSL_realloc(ret->data, len+4);
+		if (!new_data)
+			{
+			ASN1err(ASN1_F_BN_TO_ASN1_INTEGER,ERR_R_MALLOC_FAILURE);
+			goto err;
+			}
+		ret->data=new_data;
+		}
 	ret->length=BN_bn2bin(bn,ret->data);
 	return(ret);
 err:

crypto/asn1/a_set.c

@@ -116,7 +116,7 @@ int i2d_ASN1_SET(STACK *a, unsigned char **pp, int (*func)(), int ex_tag,
 		}
 
         pStart  = p; /* Catch the beg of Setblobs*/
-        rgSetBlob = (MYBLOB *)OPENSSL_malloc( sk_num(a) * sizeof(MYBLOB)); /* In this array
+        if (!(rgSetBlob = (MYBLOB *)OPENSSL_malloc( sk_num(a) * sizeof(MYBLOB)))) return 0; /* In this array
 we will store the SET blobs */
 
         for (i=0; i<sk_num(a); i++)
@@ -133,7 +133,7 @@ SetBlob
  /* Now we have to sort the blobs. I am using a simple algo.
     *Sort ptrs *Copy to temp-mem *Copy from temp-mem to user-mem*/
         qsort( rgSetBlob, sk_num(a), sizeof(MYBLOB), SetBlobCmp);
-        pTempMem = OPENSSL_malloc(totSize);
+        if (!(pTempMem = OPENSSL_malloc(totSize))) return 0;
 
 /* Copy to temp mem */
         p = pTempMem;

crypto/asn1/a_sign.c

@@ -55,6 +55,59 @@
  * copied and put under another distribution licence
  * [including the GNU Public Licence.]
  */
+/* ====================================================================
+ * Copyright (c) 1998-2002 The OpenSSL Project.  All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer. 
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ *
+ * 3. All advertising materials mentioning features or use of this
+ *    software must display the following acknowledgment:
+ *    "This product includes software developed by the OpenSSL Project
+ *    for use in the OpenSSL Toolkit. (http://www.openssl.org/)"
+ *
+ * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
+ *    endorse or promote products derived from this software without
+ *    prior written permission. For written permission, please contact
+ *    openssl-core@openssl.org.
+ *
+ * 5. Products derived from this software may not be called "OpenSSL"
+ *    nor may "OpenSSL" appear in their names without prior written
+ *    permission of the OpenSSL Project.
+ *
+ * 6. Redistributions of any form whatsoever must retain the following
+ *    acknowledgment:
+ *    "This product includes software developed by the OpenSSL Project
+ *    for use in the OpenSSL Toolkit (http://www.openssl.org/)"
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
+ * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
+ * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE OpenSSL PROJECT OR
+ * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
+ * OF THE POSSIBILITY OF SUCH DAMAGE.
+ * ====================================================================
+ *
+ * This product includes cryptographic software written by Eric Young
+ * (eay@cryptsoft.com).  This product includes software written by Tim
+ * Hudson (tjh@cryptsoft.com).
+ *
+ */
 
 #include <stdio.h>
 #include <time.h>
@@ -87,7 +140,14 @@ int ASN1_sign(int (*i2d)(), X509_ALGOR *algor1, X509_ALGOR *algor2,
 		else
 			a=algor2;
 		if (a == NULL) continue;
-		if (	(a->parameter == NULL) || 
+                if (type->pkey_type == NID_dsaWithSHA1)
+			{
+			/* special case: RFC 2459 tells us to omit 'parameters'
+			 * with id-dsa-with-sha1 */
+			ASN1_TYPE_free(a->parameter);
+			a->parameter = NULL;
+			}
+		else if ((a->parameter == NULL) || 
 			(a->parameter->type != V_ASN1_NULL))
 			{
 			ASN1_TYPE_free(a->parameter);
@@ -139,10 +199,10 @@ int ASN1_sign(int (*i2d)(), X509_ALGOR *algor1, X509_ALGOR *algor2,
 	signature->flags&= ~(ASN1_STRING_FLAG_BITS_LEFT|0x07);
 	signature->flags|=ASN1_STRING_FLAG_BITS_LEFT;
 err:
-	memset(&ctx,0,sizeof(ctx));
+	OPENSSL_cleanse(&ctx,sizeof(ctx));
 	if (buf_in != NULL)
-		{ memset((char *)buf_in,0,(unsigned int)inl); OPENSSL_free(buf_in); }
+		{ OPENSSL_cleanse((char *)buf_in,(unsigned int)inl); OPENSSL_free(buf_in); }
 	if (buf_out != NULL)
-		{ memset((char *)buf_out,0,outll); OPENSSL_free(buf_out); }
+		{ OPENSSL_cleanse((char *)buf_out,outll); OPENSSL_free(buf_out); }
 	return(outl);
 	}

crypto/asn1/a_strex.c

@@ -519,7 +519,7 @@ int ASN1_STRING_to_UTF8(unsigned char **out, ASN1_STRING *in)
 {
 	ASN1_STRING stmp, *str = &stmp;
 	int mbflag, type, ret;
-	if(!*out || !in) return -1;
+	if(!in) return -1;
 	type = in->type;
 	if((type < 0) || (type > 30)) return -1;
 	mbflag = tag2nbyte[type];
@@ -528,6 +528,6 @@ int ASN1_STRING_to_UTF8(unsigned char **out, ASN1_STRING *in)
 	stmp.data = NULL;
 	ret = ASN1_mbstring_copy(&str, in->data, in->length, mbflag, B_ASN1_UTF8STRING);
 	if(ret < 0) return ret;
-	if(out) *out = stmp.data;
+	*out = stmp.data;
 	return stmp.length;
 }

crypto/asn1/a_strnid.c

@@ -105,9 +105,9 @@ int ASN1_STRING_set_default_mask_asc(char *p)
 		mask = strtoul(p + 5, &end, 0);
 		if(*end) return 0;
 	} else if(!strcmp(p, "nombstr"))
-			 mask = ~(B_ASN1_BMPSTRING|B_ASN1_UTF8STRING);
+		mask = ~((unsigned long)(B_ASN1_BMPSTRING|B_ASN1_UTF8STRING));
 	else if(!strcmp(p, "pkix"))
-			mask = ~B_ASN1_T61STRING;
+			mask = ~((unsigned long)B_ASN1_T61STRING);
 	else if(!strcmp(p, "utf8only")) mask = B_ASN1_UTF8STRING;
 	else if(!strcmp(p, "default"))
 	    mask = 0xFFFFFFFFL;
@@ -133,7 +133,7 @@ ASN1_STRING *ASN1_STRING_set_by_NID(ASN1_STRING **out, const unsigned char *in,
 	if(tbl) {
 		mask = tbl->mask;
 		if(!(tbl->flags & STABLE_NO_MASK)) mask &= global_mask;
-		ret = ASN1_mbstring_ncopy(out, in, inlen, inform, tbl->mask,
+		ret = ASN1_mbstring_ncopy(out, in, inlen, inform, mask,
 					tbl->minsize, tbl->maxsize);
 	} else ret = ASN1_mbstring_copy(out, in, inlen, inform, DIRSTRING_TYPE & global_mask);
 	if(ret <= 0) return NULL;

crypto/asn1/a_time.c

@@ -113,7 +113,7 @@ ASN1_TIME *d2i_ASN1_TIME(ASN1_TIME **a, unsigned char **pp, long length)
 ASN1_TIME *ASN1_TIME_set(ASN1_TIME *s, time_t t)
 	{
 	struct tm *ts;
-#if defined(THREADS) && !defined(WIN32) && !defined(__CYGWIN32__)
+#if defined(THREADS) && !defined(WIN32) && !defined(__CYGWIN32__) && !defined(_DARWIN)
 	struct tm data;
 
 	gmtime_r(&t,&data);

crypto/asn1/a_utctm.c

@@ -203,7 +203,7 @@ ASN1_UTCTIME *ASN1_UTCTIME_set(ASN1_UTCTIME *s, time_t t)
 	if (s == NULL)
 		return(NULL);
 
-#if defined(THREADS) && !defined(WIN32) && !defined(__CYGWIN32__)
+#if defined(THREADS) && !defined(WIN32) && !defined(__CYGWIN32__) && !defined(_DARWIN)
 	gmtime_r(&t,&data); /* should return &data, but doesn't on some systems, so we don't even look at the return value */
 	ts=&data;
 #else
@@ -246,6 +246,8 @@ ASN1_UTCTIME *ASN1_UTCTIME_set(ASN1_UTCTIME *s, time_t t)
 		ts=(struct tm *)localtime(&t);
 		}
 #endif
+	if (ts == NULL)
+		return(NULL);
 	p=(char *)s->data;
 	if ((p == NULL) || (s->length < 14))
 		{
@@ -270,6 +272,9 @@ ASN1_UTCTIME *ASN1_UTCTIME_set(ASN1_UTCTIME *s, time_t t)
 int ASN1_UTCTIME_cmp_time_t(const ASN1_UTCTIME *s, time_t t)
 	{
 	struct tm *tm;
+#if defined(THREADS) && !defined(WIN32) && !defined(__CYGWIN32__) && !defined(_DARWIN)
+	struct tm data;
+#endif
 	int offset;
 	int year;
 
@@ -286,8 +291,9 @@ int ASN1_UTCTIME_cmp_time_t(const ASN1_UTCTIME *s, time_t t)
 
 	t -= offset*60; /* FIXME: may overflow in extreme cases */
 
-#if defined(THREADS) && !defined(WIN32) && !defined(__CYGWIN32__)
-	{ struct tm data; gmtime_r(&t, &data); tm = &data; }
+#if defined(THREADS) && !defined(WIN32) && !defined(__CYGWIN32__) && !defined(_DARWIN)
+	gmtime_r(&t, &data);
+	tm = &data;
 #else
 	tm = gmtime(&t);
 #endif

crypto/asn1/a_verify.c

@@ -100,7 +100,7 @@ int ASN1_verify(int (*i2d)(), X509_ALGOR *a, ASN1_BIT_STRING *signature,
 	EVP_VerifyInit(&ctx,type);
 	EVP_VerifyUpdate(&ctx,(unsigned char *)buf_in,inl);
 
-	memset(buf_in,0,(unsigned int)inl);
+	OPENSSL_cleanse(buf_in,(unsigned int)inl);
 	OPENSSL_free(buf_in);
 
 	if (EVP_VerifyFinal(&ctx,(unsigned char *)signature->data,

crypto/asn1/asn1.h

@@ -834,8 +834,6 @@ void ASN1_HEADER_free(ASN1_HEADER *a);
 
 int ASN1_UNIVERSALSTRING_to_string(ASN1_UNIVERSALSTRING *s);
 
-void ERR_load_ASN1_strings(void);
-
 /* Not used that much at this point, except for the first two */
 ASN1_METHOD *X509_asn1_meth(void);
 ASN1_METHOD *RSAPrivateKey_asn1_meth(void);
@@ -877,6 +875,7 @@ void ASN1_STRING_TABLE_cleanup(void);
 /* The following lines are auto generated by the script mkerr.pl. Any changes
  * made after this point may be overwritten when the script is next run.
  */
+void ERR_load_ASN1_strings(void);
 
 /* Error codes for the ASN1 functions. */
 
@@ -1148,4 +1147,3 @@ void ASN1_STRING_TABLE_cleanup(void);
 }
 #endif
 #endif
-

crypto/asn1/asn1_lib.c

@@ -57,6 +57,7 @@
  */
 
 #include <stdio.h>
+#include <limits.h>
 #include "cryptlib.h"
 #include <openssl/asn1.h>
 #include <openssl/asn1_mac.h>
@@ -124,15 +125,13 @@ int ASN1_get_object(unsigned char **pp, long *plength, int *ptag, int *pclass,
 		(int)(omax+ *pp));
 
 #endif
-#if 0
-	if ((p+ *plength) > (omax+ *pp))
+	if (*plength > (omax - (p - *pp)))
 		{
 		ASN1err(ASN1_F_ASN1_GET_OBJECT,ASN1_R_TOO_LONG);
 		/* Set this so that even if things are not long enough
 		 * the values are set correctly */
 		ret|=0x80;
 		}
-#endif
 	*pp=p;
 	return(ret|inf);
 err:
@@ -143,7 +142,7 @@ err:
 static int asn1_get_length(unsigned char **pp, int *inf, long *rl, int max)
 	{
 	unsigned char *p= *pp;
-	long ret=0;
+	unsigned long ret=0;
 	int i;
 
 	if (max-- < 1) return(0);
@@ -159,6 +158,8 @@ static int asn1_get_length(unsigned char **pp, int *inf, long *rl, int max)
 		i= *p&0x7f;
 		if (*(p++) & 0x80)
 			{
+			if (i > sizeof(long))
+				return 0;
 			if (max-- == 0) return(0);
 			while (i-- > 0)
 				{
@@ -170,8 +171,10 @@ static int asn1_get_length(unsigned char **pp, int *inf, long *rl, int max)
 		else
 			ret=i;
 		}
+	if (ret > LONG_MAX)
+		return 0;
 	*pp=p;
-	*rl=ret;
+	*rl=(long)ret;
 	return(1);
 	}
 
@@ -301,7 +304,7 @@ int asn1_GetSequence(ASN1_CTX *c, long *length)
 		return(0);
 		}
 	if (c->inf == (1|V_ASN1_CONSTRUCTED))
-		c->slen= *length+ *(c->pp)-c->p;
+		c->slen= *length;
 	c->eos=0;
 	return(1);
 	}
@@ -407,7 +410,7 @@ int ASN1_STRING_cmp(ASN1_STRING *a, ASN1_STRING *b)
 
 void asn1_add_error(unsigned char *address, int offset)
 	{
-	char buf1[16],buf2[16];
+	char buf1[DECIMAL_SIZE(address)+1],buf2[DECIMAL_SIZE(offset)+1];
 
 	sprintf(buf1,"%lu",(unsigned long)address);
 	sprintf(buf2,"%d",offset);

crypto/asn1/asn1_mac.h

@@ -196,6 +196,9 @@ err:\
 	if ((a != NULL) && (sk_##type##_num(a) != 0)) \
 		M_ASN1_I2D_put_SEQUENCE_type(type,a,f);
 
+#define M_ASN1_I2D_put_SEQUENCE_opt_ex_type(type,a,f) \
+	if (a) M_ASN1_I2D_put_SEQUENCE_type(type,a,f);
+
 #define M_ASN1_D2I_get_IMP_set_opt(b,func,free_func,tag) \
 	if ((c.slen != 0) && \
 		(M_ASN1_next == \
@@ -389,6 +392,9 @@ err:\
 		if ((a != NULL) && (sk_##type##_num(a) != 0)) \
 			M_ASN1_I2D_len_SEQUENCE_type(type,a,f);
 
+#define M_ASN1_I2D_len_SEQUENCE_opt_ex_type(type,a,f) \
+		if (a) M_ASN1_I2D_len_SEQUENCE_type(type,a,f);
+
 #define M_ASN1_I2D_len_IMP_SET(a,f,x) \
 		ret+=i2d_ASN1_SET(a,NULL,f,x,V_ASN1_CONTEXT_SPECIFIC,IS_SET);
 
@@ -452,6 +458,15 @@ err:\
 			ret+=ASN1_object_size(1,v,mtag); \
 			}
 
+#define M_ASN1_I2D_len_EXP_SEQUENCE_opt_ex_type(type,a,f,mtag,tag,v) \
+		if (a)\
+			{ \
+			v=i2d_ASN1_SET_OF_##type(a,NULL,f,tag, \
+						 V_ASN1_UNIVERSAL, \
+						 IS_SEQUENCE); \
+			ret+=ASN1_object_size(1,v,mtag); \
+			}
+
 /* Put Macros */
 #define M_ASN1_I2D_put(a,f)	f(a,&p)
 
@@ -536,6 +551,14 @@ err:\
 					       IS_SEQUENCE); \
 			}
 
+#define M_ASN1_I2D_put_EXP_SEQUENCE_opt_ex_type(type,a,f,mtag,tag,v) \
+		if (a) \
+			{ \
+			ASN1_put_object(&p,1,v,mtag,V_ASN1_CONTEXT_SPECIFIC); \
+			i2d_ASN1_SET_OF_##type(a,&p,f,tag,V_ASN1_UNIVERSAL, \
+					       IS_SEQUENCE); \
+			}
+
 #define M_ASN1_I2D_seq_total() \
 		r=ASN1_object_size(1,ret,V_ASN1_SEQUENCE); \
 		if (pp == NULL) return(r); \

crypto/asn1/d2i_dhp.c

@@ -87,6 +87,7 @@ DH *d2i_DHparams(DH **a, unsigned char **pp, long length)
 		}
 
 	M_ASN1_BIT_STRING_free(bs);
+	bs = NULL;
 
 	M_ASN1_D2I_Finish_2(a);
 

crypto/asn1/d2i_dsap.c

@@ -84,6 +84,7 @@ DSA *d2i_DSAparams(DSA **a, unsigned char **pp, long length)
 	if ((ret->g=BN_bin2bn(bs->data,bs->length,ret->g)) == NULL) goto err_bn;
 
 	M_ASN1_BIT_STRING_free(bs);
+	bs = NULL;
 
 	M_ASN1_D2I_Finish_2(a);
 

crypto/asn1/d2i_r_pr.c

@@ -108,6 +108,7 @@ RSA *d2i_RSAPrivateKey(RSA **a, unsigned char **pp, long length)
 		goto err_bn;
 
 	M_ASN1_INTEGER_free(bs);
+	bs = NULL;
 
 	M_ASN1_D2I_Finish_2(a);
 err_bn:

crypto/asn1/n_pkey.c

@@ -181,7 +181,7 @@ int i2d_RSA_NET(RSA *a, unsigned char **pp, int (*cb)(), int sgckey)
 	}
 		
 	EVP_BytesToKey(EVP_rc4(),EVP_md5(),NULL,buf,i,1,key,NULL);
-	memset(buf,0,256);
+	OPENSSL_cleanse(buf,256);
 
 	EVP_CIPHER_CTX_init(&ctx);
 	EVP_EncryptInit(&ctx,EVP_rc4(),key,NULL);
@@ -292,7 +292,7 @@ RSA *d2i_RSA_NET_2(RSA **a, unsigned char **pp, long length,
 	}
 		
 	EVP_BytesToKey(EVP_rc4(),EVP_md5(),NULL,buf,i,1,key,NULL);
-	memset(buf,0,256);
+	OPENSSL_cleanse(buf,256);
 
 	EVP_CIPHER_CTX_init(&ctx);
 	EVP_DecryptInit(&ctx,EVP_rc4(),key,NULL);

crypto/asn1/p7_lib.c

@@ -307,12 +307,14 @@ PKCS7 *d2i_PKCS7(PKCS7 **a, unsigned char **pp, long length)
 			}
 		if (Tinf == (1|V_ASN1_CONSTRUCTED))
 			{
+			c.q=c.p;
 			if (!ASN1_check_infinite_end(&c.p,c.slen))
 				{
 				c.error=ERR_R_MISSING_ASN1_EOS;
 				c.line=__LINE__;
 				goto err;
 				}
+			c.slen-=(c.p-c.q);
 			}
 		}
 	else

crypto/asn1/p8_pkey.c

@@ -119,8 +119,8 @@ void PKCS8_PRIV_KEY_INFO_free (PKCS8_PRIV_KEY_INFO *a)
 	X509_ALGOR_free(a->pkeyalg);
 	/* Clear sensitive data */
 	if (a->pkey->value.octet_string)
-		memset (a->pkey->value.octet_string->data,
-				 0, a->pkey->value.octet_string->length);
+		OPENSSL_cleanse(a->pkey->value.octet_string->data,
+				a->pkey->value.octet_string->length);
 	ASN1_TYPE_free (a->pkey);
 	sk_X509_ATTRIBUTE_pop_free (a->attributes, X509_ATTRIBUTE_free);
 	OPENSSL_free (a);

crypto/asn1/t_pkey.c

@@ -96,10 +96,34 @@ int RSA_print(BIO *bp, RSA *x, int off)
 	char str[128];
 	const char *s;
 	unsigned char *m=NULL;
-	int i,ret=0;
+	int ret=0;
+	size_t buf_len=0, i;
 
-	i=RSA_size(x);
-	m=(unsigned char *)OPENSSL_malloc((unsigned int)i+10);
+	if (x->n)
+		buf_len = (size_t)BN_num_bytes(x->n);
+	if (x->e)
+		if (buf_len < (i = (size_t)BN_num_bytes(x->e)))
+			buf_len = i;
+	if (x->d)
+		if (buf_len < (i = (size_t)BN_num_bytes(x->d)))
+			buf_len = i;
+	if (x->p)
+		if (buf_len < (i = (size_t)BN_num_bytes(x->p)))
+			buf_len = i;
+	if (x->q)
+		if (buf_len < (i = (size_t)BN_num_bytes(x->q)))
+			buf_len = i;
+	if (x->dmp1)
+		if (buf_len < (i = (size_t)BN_num_bytes(x->dmp1)))
+			buf_len = i;
+	if (x->dmq1)
+		if (buf_len < (i = (size_t)BN_num_bytes(x->dmq1)))
+			buf_len = i;
+	if (x->iqmp)
+		if (buf_len < (i = (size_t)BN_num_bytes(x->iqmp)))
+			buf_len = i;
+
+	m=(unsigned char *)OPENSSL_malloc(buf_len+10);
 	if (m == NULL)
 		{
 		RSAerr(RSA_F_RSA_PRINT,ERR_R_MALLOC_FAILURE);
@@ -161,22 +185,25 @@ int DSA_print(BIO *bp, DSA *x, int off)
 	{
 	char str[128];
 	unsigned char *m=NULL;
-	int i,ret=0;
-	BIGNUM *bn=NULL;
+	int ret=0;
+	size_t buf_len=0,i;
 
-	if (x->p != NULL)
-		bn=x->p;
-	else if (x->priv_key != NULL)
-		bn=x->priv_key;
-	else if (x->pub_key != NULL)
-		bn=x->pub_key;
-		
-	/* larger than needed but what the hell :-) */
-	if (bn != NULL)
-		i=BN_num_bytes(bn)*2;
-	else
-		i=256;
-	m=(unsigned char *)OPENSSL_malloc((unsigned int)i+10);
+	if (x->p)
+		buf_len = (size_t)BN_num_bytes(x->p);
+	if (x->q)
+		if (buf_len < (i = (size_t)BN_num_bytes(x->q)))
+			buf_len = i;
+	if (x->g)
+		if (buf_len < (i = (size_t)BN_num_bytes(x->g)))
+			buf_len = i;
+	if (x->priv_key)
+		if (buf_len < (i = (size_t)BN_num_bytes(x->priv_key)))
+			buf_len = i;
+	if (x->pub_key)
+		if (buf_len < (i = (size_t)BN_num_bytes(x->pub_key)))
+			buf_len = i;
+
+	m=(unsigned char *)OPENSSL_malloc(buf_len+10);
 	if (m == NULL)
 		{
 		DSAerr(DSA_F_DSA_PRINT,ERR_R_MALLOC_FAILURE);
@@ -281,10 +308,15 @@ int DHparams_print_fp(FILE *fp, DH *x)
 int DHparams_print(BIO *bp, DH *x)
 	{
 	unsigned char *m=NULL;
-	int reason=ERR_R_BUF_LIB,i,ret=0;
+	int reason=ERR_R_BUF_LIB,ret=0;
+	size_t buf_len=0, i;
 
-	i=BN_num_bytes(x->p);
-	m=(unsigned char *)OPENSSL_malloc((unsigned int)i+10);
+	if (x->p)
+		buf_len = (size_t)BN_num_bytes(x->p);
+	if (x->g)
+		if (buf_len < (i = (size_t)BN_num_bytes(x->g)))
+			buf_len = i;
+	m=(unsigned char *)OPENSSL_malloc(buf_len+10);
 	if (m == NULL)
 		{
 		reason=ERR_R_MALLOC_FAILURE;
@@ -334,10 +366,18 @@ int DSAparams_print_fp(FILE *fp, DSA *x)
 int DSAparams_print(BIO *bp, DSA *x)
 	{
 	unsigned char *m=NULL;
-	int reason=ERR_R_BUF_LIB,i,ret=0;
+	int reason=ERR_R_BUF_LIB,ret=0;
+	size_t buf_len=0, i;
 
-	i=BN_num_bytes(x->p);
-	m=(unsigned char *)OPENSSL_malloc((unsigned int)i+10);
+	if (x->p)
+		buf_len = (size_t)BN_num_bytes(x->p);
+	if (x->q)
+		if (buf_len < (i = (size_t)BN_num_bytes(x->q)))
+			buf_len = i;
+	if (x->g)
+		if (buf_len < (i = (size_t)BN_num_bytes(x->g)))
+			buf_len = i;
+	m=(unsigned char *)OPENSSL_malloc(buf_len+10);
 	if (m == NULL)
 		{
 		reason=ERR_R_MALLOC_FAILURE;

crypto/asn1/t_x509.c

@@ -349,6 +349,8 @@ int X509_NAME_print(BIO *bp, X509_NAME *name, int obase)
 	ll=80-2-obase;
 
 	s=X509_NAME_oneline(name,buf,256);
+	if (!*s)
+		return 1;
 	s++; /* skip the first slash */
 
 	l=ll;

crypto/asn1/x_crl.c

@@ -71,14 +71,14 @@ int i2d_X509_REVOKED(X509_REVOKED *a, unsigned char **pp)
 
 	M_ASN1_I2D_len(a->serialNumber,i2d_ASN1_INTEGER);
 	M_ASN1_I2D_len(a->revocationDate,i2d_ASN1_TIME);
-	M_ASN1_I2D_len_SEQUENCE_opt_type(X509_EXTENSION,a->extensions,
+	M_ASN1_I2D_len_SEQUENCE_opt_ex_type(X509_EXTENSION,a->extensions,
 					 i2d_X509_EXTENSION);
 
 	M_ASN1_I2D_seq_total();
 
 	M_ASN1_I2D_put(a->serialNumber,i2d_ASN1_INTEGER);
 	M_ASN1_I2D_put(a->revocationDate,i2d_ASN1_TIME);
-	M_ASN1_I2D_put_SEQUENCE_opt_type(X509_EXTENSION,a->extensions,
+	M_ASN1_I2D_put_SEQUENCE_opt_ex_type(X509_EXTENSION,a->extensions,
 					 i2d_X509_EXTENSION);
 
 	M_ASN1_I2D_finish();
@@ -121,7 +121,7 @@ int i2d_X509_CRL_INFO(X509_CRL_INFO *a, unsigned char **pp)
 		{ M_ASN1_I2D_len(a->nextUpdate,i2d_ASN1_TIME); }
 	M_ASN1_I2D_len_SEQUENCE_opt_type(X509_REVOKED,a->revoked,
 					 i2d_X509_REVOKED);
-	M_ASN1_I2D_len_EXP_SEQUENCE_opt_type(X509_EXTENSION,a->extensions,
+	M_ASN1_I2D_len_EXP_SEQUENCE_opt_ex_type(X509_EXTENSION,a->extensions,
 					     i2d_X509_EXTENSION,0,
 					     V_ASN1_SEQUENCE,v1);
 
@@ -138,7 +138,7 @@ int i2d_X509_CRL_INFO(X509_CRL_INFO *a, unsigned char **pp)
 		{ M_ASN1_I2D_put(a->nextUpdate,i2d_ASN1_TIME); }
 	M_ASN1_I2D_put_SEQUENCE_opt_type(X509_REVOKED,a->revoked,
 					 i2d_X509_REVOKED);
-	M_ASN1_I2D_put_EXP_SEQUENCE_opt_type(X509_EXTENSION,a->extensions,
+	M_ASN1_I2D_put_EXP_SEQUENCE_opt_ex_type(X509_EXTENSION,a->extensions,
 					     i2d_X509_EXTENSION,0,
 					     V_ASN1_SEQUENCE,v1);
 
@@ -260,7 +260,7 @@ X509_CRL_INFO *X509_CRL_INFO_new(void)
 	M_ASN1_New(ret->lastUpdate,M_ASN1_UTCTIME_new);
 	ret->nextUpdate=NULL;
 	M_ASN1_New(ret->revoked,sk_X509_REVOKED_new_null);
-	M_ASN1_New(ret->extensions,sk_X509_EXTENSION_new_null);
+	ret->extensions = NULL;
 	sk_X509_REVOKED_set_cmp_func(ret->revoked,X509_REVOKED_cmp);
 	return(ret);
 	M_ASN1_New_Error(ASN1_F_X509_CRL_INFO_NEW);

crypto/asn1/x_name.c

@@ -141,10 +141,12 @@ static int i2d_X509_NAME_entries(X509_NAME *a)
 			}
 		size+=i2d_X509_NAME_ENTRY(ne,NULL);
 		}
-
-	ret+=ASN1_object_size(1,size,V_ASN1_SET);
 	if (fe != NULL)
+		{
+		/* SET OF needed only if entries is non empty */
+		ret+=ASN1_object_size(1,size,V_ASN1_SET);
 		fe->size=size;
+		}
 
 	r=ASN1_object_size(1,ret,V_ASN1_SEQUENCE);
 

crypto/asn1/x_pubkey.c

@@ -156,7 +156,7 @@ int X509_PUBKEY_set(X509_PUBKEY **x, EVP_PKEY *pkey)
 		dsa->write_params=0;
 		ASN1_TYPE_free(a->parameter);
 		i=i2d_DSAparams(dsa,NULL);
-		p=(unsigned char *)OPENSSL_malloc(i);
+		if ((p=(unsigned char *)OPENSSL_malloc(i)) == NULL) goto err;
 		pp=p;
 		i2d_DSAparams(dsa,&pp);
 		a->parameter=ASN1_TYPE_new();
@@ -234,7 +234,7 @@ EVP_PKEY *X509_PUBKEY_get(X509_PUBKEY *key)
 	a=key->algor;
 	if (ret->type == EVP_PKEY_DSA)
 		{
-		if (a->parameter->type == V_ASN1_SEQUENCE)
+		if (a->parameter && (a->parameter->type == V_ASN1_SEQUENCE))
 			{
 			ret->pkey.dsa->write_params=0;
 			p=a->parameter->value.sequence->data;

crypto/bf/Makefile.ssl

@@ -44,7 +44,8 @@ all:	lib
 
 lib:	$(LIBOBJ)
 	$(AR) $(LIB) $(LIBOBJ)
-	$(RANLIB) $(LIB)
+	@echo You may get an error following this line.  Please ignore.
+	- $(RANLIB) $(LIB)
 	@touch lib
 
 # elf
@@ -95,7 +96,7 @@ lint:
 	lint -DLINT $(INCLUDES) $(SRC)>fluff
 
 depend:
-	$(MAKEDEPEND) $(INCLUDES) $(DEPFLAG) $(PROGS) $(LIBSRC)
+	$(MAKEDEPEND) -- $(INCLUDES) $(DEPFLAG) -- $(PROGS) $(LIBSRC)
 
 dclean:
 	$(PERL) -pe 'if (/^# DO NOT DELETE THIS LINE/) {print; exit(0);}' $(MAKEFILE) >Makefile.new

crypto/bf/bftest.c

@@ -63,6 +63,8 @@
 #include <string.h>
 #include <stdlib.h>
 
+#include "../e_os.h"
+
 #ifdef NO_BF
 int main(int argc, char *argv[])
 {
@@ -275,7 +277,7 @@ int main(int argc, char *argv[])
 	else
 		ret=test();
 
-	exit(ret);
+	EXIT(ret);
 	return(0);
 	}
 

crypto/bio/Makefile.ssl

@@ -49,7 +49,8 @@ all:	lib
 
 lib:	$(LIBOBJ)
 	$(AR) $(LIB) $(LIBOBJ)
-	$(RANLIB) $(LIB)
+	@echo You may get an error following this line.  Please ignore.
+	- $(RANLIB) $(LIB)
 	@touch lib
 
 files:
@@ -77,7 +78,7 @@ lint:
 	lint -DLINT $(INCLUDES) $(SRC)>fluff
 
 depend:
-	$(MAKEDEPEND) $(INCLUDES) $(DEPFLAG) $(PROGS) $(LIBSRC)
+	$(MAKEDEPEND) -- $(INCLUDES) $(DEPFLAG) -- $(PROGS) $(LIBSRC)
 
 dclean:
 	$(PERL) -pe 'if (/^# DO NOT DELETE THIS LINE/) {print; exit(0);}' $(MAKEFILE) >Makefile.new
@@ -95,13 +96,13 @@ b_dump.o: ../../include/openssl/lhash.h ../../include/openssl/opensslconf.h
 b_dump.o: ../../include/openssl/opensslv.h ../../include/openssl/safestack.h
 b_dump.o: ../../include/openssl/stack.h ../../include/openssl/symhacks.h
 b_dump.o: ../cryptlib.h
-b_print.o: ../../include/openssl/bio.h ../../include/openssl/buffer.h
-b_print.o: ../../include/openssl/crypto.h ../../include/openssl/e_os.h
-b_print.o: ../../include/openssl/e_os2.h ../../include/openssl/err.h
-b_print.o: ../../include/openssl/lhash.h ../../include/openssl/opensslconf.h
-b_print.o: ../../include/openssl/opensslv.h ../../include/openssl/safestack.h
-b_print.o: ../../include/openssl/stack.h ../../include/openssl/symhacks.h
-b_print.o: ../cryptlib.h
+b_print.o: ../../include/openssl/bio.h ../../include/openssl/bn.h
+b_print.o: ../../include/openssl/buffer.h ../../include/openssl/crypto.h
+b_print.o: ../../include/openssl/e_os.h ../../include/openssl/e_os2.h
+b_print.o: ../../include/openssl/err.h ../../include/openssl/lhash.h
+b_print.o: ../../include/openssl/opensslconf.h ../../include/openssl/opensslv.h
+b_print.o: ../../include/openssl/safestack.h ../../include/openssl/stack.h
+b_print.o: ../../include/openssl/symhacks.h ../cryptlib.h
 b_sock.o: ../../include/openssl/bio.h ../../include/openssl/buffer.h
 b_sock.o: ../../include/openssl/crypto.h ../../include/openssl/e_os.h
 b_sock.o: ../../include/openssl/e_os2.h ../../include/openssl/err.h

crypto/bio/b_print.c

@@ -56,6 +56,13 @@
  * [including the GNU Public Licence.]
  */
 
+/* disable assert() unless BIO_DEBUG has been defined */
+#ifndef BIO_DEBUG
+# ifndef NDEBUG
+#  define NDEBUG
+# endif
+#endif
+
 /* 
  * Stolen from tjh's ssl/ssl_trc.c stuff.
  */
@@ -69,6 +76,7 @@
 #ifndef NO_SYS_TYPES_H
 #include <sys/types.h>
 #endif
+#include <openssl/bn.h>         /* To get BN_LLONG properly defined */
 #include <openssl/bio.h>
 
 #ifdef BN_LLONG
@@ -101,14 +109,18 @@
  * o ...                                       (for OpenSSL)
  */
 
-#if HAVE_LONG_DOUBLE
+#ifdef HAVE_LONG_DOUBLE
 #define LDOUBLE long double
 #else
 #define LDOUBLE double
 #endif
 
 #if HAVE_LONG_LONG
-#define LLONG long long
+# if defined(WIN32) && !defined(__GNUC__)
+# define LLONG _int64
+# else
+# define LLONG long long
+# endif
 #else
 #define LLONG long
 #endif
@@ -151,7 +163,7 @@ static void _dopr(char **sbuffer, char **buffer,
 
 /* some handy macros */
 #define char_to_int(p) (p - '0')
-#define MAX(p,q) ((p >= q) ? p : q)
+#define OSSL_MAX(p,q) ((p >= q) ? p : q)
 
 static void
 _dopr(
@@ -502,13 +514,13 @@ fmtint(
     convert[place] = 0;
 
     zpadlen = max - place;
-    spadlen = min - MAX(max, place) - (signvalue ? 1 : 0);
+    spadlen = min - OSSL_MAX(max, place) - (signvalue ? 1 : 0);
     if (zpadlen < 0)
         zpadlen = 0;
     if (spadlen < 0)
         spadlen = 0;
     if (flags & DP_F_ZERO) {
-        zpadlen = MAX(zpadlen, spadlen);
+        zpadlen = OSSL_MAX(zpadlen, spadlen);
         spadlen = 0;
     }
     if (flags & DP_F_MINUS)
@@ -564,7 +576,7 @@ pow10(int exp)
 }
 
 static long
-round(LDOUBLE value)
+roundv(LDOUBLE value)
 {
     long intpart;
     intpart = (long) value;
@@ -616,7 +628,7 @@ fmtfp(
 
     /* we "cheat" by converting the fractional part to integer by
        multiplying by a factor of 10 */
-    fracpart = round((pow10(max)) * (ufvalue - intpart));
+    fracpart = roundv((pow10(max)) * (ufvalue - intpart));
 
     if (fracpart >= pow10(max)) {
         intpart++;
@@ -640,7 +652,7 @@ fmtfp(
             (caps ? "0123456789ABCDEF"
               : "0123456789abcdef")[fracpart % 10];
         fracpart = (fracpart / 10);
-    } while (fracpart && (fplace < 20));
+    } while (fplace < max);
     if (fplace == 20)
         fplace--;
     fconvert[fplace] = 0;
@@ -711,12 +723,13 @@ doapr_outch(
     if (buffer) {
 	while (*currlen >= *maxlen) {
 	    if (*buffer == NULL) {
-		assert(*sbuffer != NULL);
 		if (*maxlen == 0)
 		    *maxlen = 1024;
 		*buffer = OPENSSL_malloc(*maxlen);
-		if (*currlen > 0)
+		if (*currlen > 0) {
+		    assert(*sbuffer != NULL);
 		    memcpy(*buffer, *sbuffer, *currlen);
+		}
 		*sbuffer = NULL;
 	    } else {
 		*maxlen += 1024;
@@ -756,7 +769,9 @@ int BIO_vprintf (BIO *bio, const char *format, va_list args)
 	{
 	int ret;
 	size_t retlen;
-	MS_STATIC char hugebuf[1024*10];
+	char hugebuf[1024*2];	/* Was previously 10k, which is unreasonable
+				   in small-stack environments, like threads
+				   or DOS programs. */
 	char *hugebufp = hugebuf;
 	size_t hugebufsize = sizeof(hugebuf);
 	char *dynbuf = NULL;

crypto/bio/b_sock.c

@@ -72,9 +72,9 @@
 #endif
 
 #ifdef SO_MAXCONN
-#define MAX_LISTEN  SOMAXCONN
-#elif defined(SO_MAXCONN)
 #define MAX_LISTEN  SO_MAXCONN
+#elif defined(SOMAXCONN)
+#define MAX_LISTEN  SOMAXCONN
 #else
 #define MAX_LISTEN  32
 #endif
@@ -95,8 +95,10 @@ static struct ghbn_cache_st
 	} ghbn_cache[GHBN_NUM];
 
 static int get_ip(const char *str,unsigned char *ip);
+#if 0
 static void ghbn_free(struct hostent *a);
 static struct hostent *ghbn_dup(struct hostent *a);
+#endif
 int BIO_get_host_ip(const char *str, unsigned char *ip)
 	{
 	int i;
@@ -113,8 +115,8 @@ int BIO_get_host_ip(const char *str, unsigned char *ip)
 
 	/* At this point, we have something that is most probably correct
 	   in some way, so let's init the socket. */
-	if (!BIO_sock_init())
-		return(0); /* don't generate another error code here */
+	if (BIO_sock_init() != 1)
+		return 0; /* don't generate another error code here */
 
 	/* If the string actually contained an IP address, we need not do
 	   anything more */
@@ -266,6 +268,7 @@ long BIO_ghbn_ctrl(int cmd, int iarg, char *parg)
 	return(1);
 	}
 
+#if 0
 static struct hostent *ghbn_dup(struct hostent *a)
 	{
 	struct hostent *ret;
@@ -342,21 +345,27 @@ static void ghbn_free(struct hostent *a)
 	if (a->h_name != NULL) OPENSSL_free(a->h_name);
 	OPENSSL_free(a);
 	}
+#endif
 
 struct hostent *BIO_gethostbyname(const char *name)
 	{
+#if 1
+	/* Caching gethostbyname() results forever is wrong,
+	 * so we have to let the true gethostbyname() worry about this */
+	return gethostbyname(name);
+#else
 	struct hostent *ret;
 	int i,lowi=0,j;
 	unsigned long low= (unsigned long)-1;
 
-/*	return(gethostbyname(name)); */
 
-#if 0 /* It doesn't make sense to use locking here: The function interface
-	   * is not thread-safe, because threads can never be sure when
-	   * some other thread destroys the data they were given a pointer to.
-	   */
+#  if 0
+	/* It doesn't make sense to use locking here: The function interface
+	 * is not thread-safe, because threads can never be sure when
+	 * some other thread destroys the data they were given a pointer to.
+	 */
 	CRYPTO_w_lock(CRYPTO_LOCK_GETHOSTBYNAME);
-#endif
+#  endif
 	j=strlen(name);
 	if (j < 128)
 		{
@@ -384,20 +393,21 @@ struct hostent *BIO_gethostbyname(const char *name)
 		 * parameter is 'char *', instead of 'const char *'
 		 */
 		ret=gethostbyname(
-#ifndef CONST_STRICT
+#  ifndef CONST_STRICT
 		    (char *)
-#endif
+#  endif
 		    name);
 
 		if (ret == NULL)
 			goto end;
 		if (j > 128) /* too big to cache */
 			{
-#if 0 /* If we were trying to make this function thread-safe (which
-	   * is bound to fail), we'd have to give up in this case
-	   * (or allocate more memory). */
+#  if 0
+			/* If we were trying to make this function thread-safe (which
+			 * is bound to fail), we'd have to give up in this case
+			 * (or allocate more memory). */
 			ret = NULL;
-#endif
+#  endif
 			goto end;
 			}
 
@@ -421,12 +431,14 @@ struct hostent *BIO_gethostbyname(const char *name)
 		ghbn_cache[i].order=BIO_ghbn_miss+BIO_ghbn_hits;
 		}
 end:
-#if 0
+#  if 0
 	CRYPTO_w_unlock(CRYPTO_LOCK_GETHOSTBYNAME);
-#endif
+#  endif
 	return(ret);
+#endif
 	}
 
+
 int BIO_sock_init(void)
 	{
 #ifdef WINDOWS
@@ -519,15 +531,15 @@ int BIO_get_accept_socket(char *host, int bind_mode)
 	{
 	int ret=0;
 	struct sockaddr_in server,client;
-	int s= -1,cs;
+	int s=INVALID_SOCKET,cs;
 	unsigned char ip[4];
 	unsigned short port;
-	char *str,*e;
+	char *str=NULL,*e;
 	const char *h,*p;
 	unsigned long l;
 	int err_num;
 
-	if (!BIO_sock_init()) return(INVALID_SOCKET);
+	if (BIO_sock_init() != 1) return(INVALID_SOCKET);
 
 	if ((str=BUF_strdup(host)) == NULL) return(INVALID_SOCKET);
 
@@ -553,7 +565,7 @@ int BIO_get_accept_socket(char *host, int bind_mode)
 		h="*";
 		}
 
-	if (!BIO_get_port(p,&port)) return(INVALID_SOCKET);
+	if (!BIO_get_port(p,&port)) goto err;
 
 	memset((char *)&server,0,sizeof(server));
 	server.sin_family=AF_INET;
@@ -563,7 +575,7 @@ int BIO_get_accept_socket(char *host, int bind_mode)
 		server.sin_addr.s_addr=INADDR_ANY;
 	else
 		{
-		if (!BIO_get_host_ip(h,&(ip[0]))) return(INVALID_SOCKET);
+                if (!BIO_get_host_ip(h,&(ip[0]))) goto err;
 		l=(unsigned long)
 			((unsigned long)ip[0]<<24L)|
 			((unsigned long)ip[1]<<16L)|

crypto/bio/bf_buff.c

@@ -70,7 +70,7 @@ static long buffer_ctrl(BIO *h, int cmd, long arg1, void *arg2);
 static int buffer_new(BIO *h);
 static int buffer_free(BIO *data);
 static long buffer_callback_ctrl(BIO *h, int cmd, bio_info_cb *fp);
-#define DEFAULT_BUFFER_SIZE	1024
+#define DEFAULT_BUFFER_SIZE	4096
 
 static BIO_METHOD methods_buffer=
 	{

crypto/bio/bf_lbuf.c

@@ -200,7 +200,7 @@ static int linebuffer_write(BIO *b, const char *in, int inl)
 					}
 				}
 
-#ifdef DEBUG
+#if 0
 BIO_write(b->next_bio, "<*<", 3);
 #endif
 			i=BIO_write(b->next_bio,
@@ -210,13 +210,13 @@ BIO_write(b->next_bio, "<*<", 3);
 				ctx->obuf_len = orig_olen;
 				BIO_copy_next_retry(b);
 
-#ifdef DEBUG
+#if 0
 BIO_write(b->next_bio, ">*>", 3);
 #endif
 				if (i < 0) return((num > 0)?num:i);
 				if (i == 0) return(num);
 				}
-#ifdef DEBUG
+#if 0
 BIO_write(b->next_bio, ">*>", 3);
 #endif
 			if (i < ctx->obuf_len)
@@ -229,20 +229,20 @@ BIO_write(b->next_bio, ">*>", 3);
 		   buffer if a NL was found and there is anything to write. */
 		if ((foundnl || p - in > ctx->obuf_size) && p - in > 0)
 			{
-#ifdef DEBUG
+#if 0
 BIO_write(b->next_bio, "<*<", 3);
 #endif
 			i=BIO_write(b->next_bio,in,p - in);
 			if (i <= 0)
 				{
 				BIO_copy_next_retry(b);
-#ifdef DEBUG
+#if 0
 BIO_write(b->next_bio, ">*>", 3);
 #endif
 				if (i < 0) return((num > 0)?num:i);
 				if (i == 0) return(num);
 				}
-#ifdef DEBUG
+#if 0
 BIO_write(b->next_bio, ">*>", 3);
 #endif
 			num+=i;

crypto/bio/bf_nbio.c

@@ -104,7 +104,7 @@ static int nbiof_new(BIO *bi)
 	{
 	NBIO_TEST *nt;
 
-	nt=(NBIO_TEST *)OPENSSL_malloc(sizeof(NBIO_TEST));
+	if (!(nt=(NBIO_TEST *)OPENSSL_malloc(sizeof(NBIO_TEST)))) return(0);
 	nt->lrn= -1;
 	nt->lwn= -1;
 	bi->ptr=(char *)nt;

crypto/bio/bio.h

@@ -356,8 +356,8 @@ typedef struct bio_f_buffer_ctx_struct
 #define BIO_set_conn_int_port(b,port) BIO_ctrl(b,BIO_C_SET_CONNECT,3,(char *)port)
 #define BIO_get_conn_hostname(b)  BIO_ptr_ctrl(b,BIO_C_GET_CONNECT,0)
 #define BIO_get_conn_port(b)      BIO_ptr_ctrl(b,BIO_C_GET_CONNECT,1)
-#define BIO_get_conn_ip(b,ip) BIO_ptr_ctrl(b,BIO_C_SET_CONNECT,2)
-#define BIO_get_conn_int_port(b,port) BIO_int_ctrl(b,BIO_C_SET_CONNECT,3,port)
+#define BIO_get_conn_ip(b) 		 BIO_ptr_ctrl(b,BIO_C_GET_CONNECT,2)
+#define BIO_get_conn_int_port(b) BIO_int_ctrl(b,BIO_C_GET_CONNECT,3)
 
 
 #define BIO_set_nbio(b,n)	BIO_ctrl(b,BIO_C_SET_NBIO,(n),NULL)
@@ -431,7 +431,7 @@ int BIO_read_filename(BIO *b,const char *name);
 #define BIO_set_ssl_renegotiate_bytes(b,num) \
 	BIO_ctrl(b,BIO_C_SET_SSL_RENEGOTIATE_BYTES,num,NULL);
 #define BIO_get_num_renegotiates(b) \
-	BIO_ctrl(b,BIO_C_SET_SSL_NUM_RENEGOTIATES,0,NULL);
+	BIO_ctrl(b,BIO_C_GET_SSL_NUM_RENEGOTIATES,0,NULL);
 #define BIO_set_ssl_renegotiate_timeout(b,seconds) \
 	BIO_ctrl(b,BIO_C_SET_SSL_RENEGOTIATE_TIMEOUT,seconds,NULL);
 
@@ -588,8 +588,6 @@ int BIO_sock_init(void );
 void BIO_sock_cleanup(void);
 int BIO_set_tcp_ndelay(int sock,int turn_on);
 
-void ERR_load_BIO_strings(void );
-
 BIO *BIO_new_socket(int sock, int close_flag);
 BIO *BIO_new_fd(int fd, int close_flag);
 BIO *BIO_new_connect(char *host_port);
@@ -615,6 +613,7 @@ int BIO_vsnprintf(char *buf, size_t n, const char *format, va_list args);
 /* The following lines are auto generated by the script mkerr.pl. Any changes
  * made after this point may be overwritten when the script is next run.
  */
+void ERR_load_BIO_strings(void);
 
 /* Error codes for the BIO functions. */
 
@@ -684,4 +683,3 @@ int BIO_vsnprintf(char *buf, size_t n, const char *format, va_list args);
 }
 #endif
 #endif
-

crypto/bio/bss_bio.c

@@ -7,9 +7,18 @@
  * for which no specific BIO method is available.
  * See ssl/ssltest.c for some hints on how this can be used. */
 
+/* BIO_DEBUG implies BIO_PAIR_DEBUG */
+#ifdef BIO_DEBUG
+# ifndef BIO_PAIR_DEBUG
+#  define BIO_PAIR_DEBUG
+# endif
+#endif
+
+/* disable assert() unless BIO_PAIR_DEBUG has been defined */
 #ifndef BIO_PAIR_DEBUG
-# undef NDEBUG /* avoid conflicting definitions */
-# define NDEBUG
+# ifndef NDEBUG
+#  define NDEBUG
+# endif
 #endif
 
 #include <assert.h>
@@ -23,7 +32,12 @@
 #include <openssl/crypto.h>
 
 #include "openssl/e_os.h"
-#ifndef SSIZE_MAX
+
+/* VxWorks defines SSiZE_MAX with an empty value causing compile errors */
+#if defined(VXWORKS)
+# undef SSIZE_MAX
+# define SSIZE_MAX INT_MAX
+#elif !defined(SSIZE_MAX)
 # define SSIZE_MAX INT_MAX
 #endif
 
@@ -474,7 +488,8 @@ static long bio_ctrl(BIO *bio, int cmd, long num, void *ptr)
 		break;
 
 	case BIO_C_GET_WRITE_BUF_SIZE:
-		num = (long) b->size;
+		ret = (long) b->size;
+		break;
 
 	case BIO_C_MAKE_BIO_PAIR:
 		{

crypto/bio/bss_log.c

@@ -75,7 +75,7 @@
 #  include <starlet.h>
 #elif defined(__ultrix)
 #  include <sys/syslog.h>
-#elif !defined(MSDOS) /* Unix */
+#elif !defined(MSDOS) && !defined(VXWORKS) /* Unix */
 #  include <syslog.h>
 #endif