prepare for 1.0.1c release

DTLS to fix DoS attack.

Thanks to Codenomicon for discovering this issue using Fuzz-o-Matic
fuzzing as a service testing platform.
(CVE-2012-2333)

ACKNOWLEDGMENTS

@@ -0,0 +1,25 @@
+The OpenSSL project depends on volunteer efforts and financial support from
+the end user community. That support comes in the form of donations and paid
+sponsorships, software support contracts, paid consulting services
+and commissioned software development.
+
+Since all these activities support the continued development and improvement
+of OpenSSL we consider all these clients and customers as sponsors of the
+OpenSSL project.
+
+We would like to identify and thank the following such sponsors for their past
+or current significant support of the OpenSSL project:
+
+Very significant support:
+
+	OpenGear: www.opengear.com
+
+Significant support:
+
+	PSW Group: www.psw.net
+
+Please note that we ask permission to identify sponsors and that some sponsors
+we consider eligible for inclusion here have requested to remain anonymous.
+
+Additional sponsorship or financial support is always welcome: for more
+information please contact the OpenSSL Software Foundation.

CHANGES

@@ -2,7 +2,605 @@
  OpenSSL CHANGES
  _______________
 
- Changes between 0.9.8j and 0.9.9  [xx XXX xxxx]
+ Changes between 1.0.1b and 1.0.1c [10 May 2012]
+
+  *) Sanity check record length before skipping explicit IV in TLS
+     1.2, 1.1 and DTLS to fix DoS attack.
+
+     Thanks to Codenomicon for discovering this issue using Fuzz-o-Matic
+     fuzzing as a service testing platform.
+     (CVE-2012-2333)
+     [Steve Henson]
+
+  *) Initialise tkeylen properly when encrypting CMS messages.
+     Thanks to Solar Designer of Openwall for reporting this issue.
+     [Steve Henson]
+
+  *) In FIPS mode don't try to use composite ciphers as they are not
+     approved.
+     [Steve Henson]
+
+ Changes between 1.0.1a and 1.0.1b [26 Apr 2012]
+
+  *) OpenSSL 1.0.0 sets SSL_OP_ALL to 0x80000FFFL and OpenSSL 1.0.1 and
+     1.0.1a set SSL_OP_NO_TLSv1_1 to 0x00000400L which would unfortunately
+     mean any application compiled against OpenSSL 1.0.0 headers setting
+     SSL_OP_ALL would also set SSL_OP_NO_TLSv1_1, unintentionally disablng
+     TLS 1.1 also. Fix this by changing the value of SSL_OP_NO_TLSv1_1 to
+     0x10000000L Any application which was previously compiled against
+     OpenSSL 1.0.1 or 1.0.1a headers and which cares about SSL_OP_NO_TLSv1_1
+     will need to be recompiled as a result. Letting be results in
+     inability to disable specifically TLS 1.1 and in client context,
+     in unlike event, limit maximum offered version to TLS 1.0 [see below].
+     [Steve Henson]
+
+  *) In order to ensure interoperabilty SSL_OP_NO_protocolX does not
+     disable just protocol X, but all protocols above X *if* there are
+     protocols *below* X still enabled. In more practical terms it means
+     that if application wants to disable TLS1.0 in favor of TLS1.1 and
+     above, it's not sufficient to pass SSL_OP_NO_TLSv1, one has to pass
+     SSL_OP_NO_TLSv1|SSL_OP_NO_SSLv3|SSL_OP_NO_SSLv2. This applies to
+     client side.
+     [Andy Polyakov]
+
+ Changes between 1.0.1 and 1.0.1a [19 Apr 2012]
+
+  *) Check for potentially exploitable overflows in asn1_d2i_read_bio
+     BUF_mem_grow and BUF_mem_grow_clean. Refuse attempts to shrink buffer
+     in CRYPTO_realloc_clean.
+
+     Thanks to Tavis Ormandy, Google Security Team, for discovering this
+     issue and to Adam Langley <agl@chromium.org> for fixing it.
+     (CVE-2012-2110)
+     [Adam Langley (Google), Tavis Ormandy, Google Security Team]
+
+  *) Don't allow TLS 1.2 SHA-256 ciphersuites in TLS 1.0, 1.1 connections.
+     [Adam Langley]
+
+  *) Workarounds for some broken servers that "hang" if a client hello
+     record length exceeds 255 bytes.
+
+     1. Do not use record version number > TLS 1.0 in initial client
+        hello: some (but not all) hanging servers will now work.
+     2. If we set OPENSSL_MAX_TLS1_2_CIPHER_LENGTH this will truncate
+	the number of ciphers sent in the client hello. This should be
+        set to an even number, such as 50, for example by passing:
+        -DOPENSSL_MAX_TLS1_2_CIPHER_LENGTH=50 to config or Configure.
+        Most broken servers should now work.
+     3. If all else fails setting OPENSSL_NO_TLS1_2_CLIENT will disable
+	TLS 1.2 client support entirely.
+     [Steve Henson]
+
+  *) Fix SEGV in Vector Permutation AES module observed in OpenSSH.
+     [Andy Polyakov]
+
+ Changes between 1.0.0h and 1.0.1  [14 Mar 2012]
+
+  *) Add compatibility with old MDC2 signatures which use an ASN1 OCTET
+     STRING form instead of a DigestInfo.
+     [Steve Henson]
+
+  *) The format used for MDC2 RSA signatures is inconsistent between EVP
+     and the RSA_sign/RSA_verify functions. This was made more apparent when
+     OpenSSL used RSA_sign/RSA_verify for some RSA signatures in particular
+     those which went through EVP_PKEY_METHOD in 1.0.0 and later. Detect 
+     the correct format in RSA_verify so both forms transparently work.
+     [Steve Henson]
+
+  *) Some servers which support TLS 1.0 can choke if we initially indicate
+     support for TLS 1.2 and later renegotiate using TLS 1.0 in the RSA
+     encrypted premaster secret. As a workaround use the maximum pemitted
+     client version in client hello, this should keep such servers happy
+     and still work with previous versions of OpenSSL.
+     [Steve Henson]
+
+  *) Add support for TLS/DTLS heartbeats.
+     [Robin Seggelmann <seggelmann@fh-muenster.de>]
+
+  *) Add support for SCTP.
+     [Robin Seggelmann <seggelmann@fh-muenster.de>]
+
+  *) Improved PRNG seeding for VOS.
+     [Paul Green <Paul.Green@stratus.com>]
+
+  *) Extensive assembler packs updates, most notably:
+
+	- x86[_64]:     AES-NI, PCLMULQDQ, RDRAND support;
+	- x86[_64]:     SSSE3 support (SHA1, vector-permutation AES);
+	- x86_64:       bit-sliced AES implementation;
+	- ARM:          NEON support, contemporary platforms optimizations;
+	- s390x:        z196 support;
+	- *:            GHASH and GF(2^m) multiplication implementations;
+
+     [Andy Polyakov]
+
+  *) Make TLS-SRP code conformant with RFC 5054 API cleanup
+     (removal of unnecessary code)
+     [Peter Sylvester <peter.sylvester@edelweb.fr>]
+
+  *) Add TLS key material exporter from RFC 5705.
+     [Eric Rescorla]
+
+  *) Add DTLS-SRTP negotiation from RFC 5764.
+     [Eric Rescorla]
+
+  *) Add Next Protocol Negotiation,
+     http://tools.ietf.org/html/draft-agl-tls-nextprotoneg-00. Can be
+     disabled with a no-npn flag to config or Configure. Code donated
+     by Google.
+     [Adam Langley <agl@google.com> and Ben Laurie]
+
+  *) Add optional 64-bit optimized implementations of elliptic curves NIST-P224,
+     NIST-P256, NIST-P521, with constant-time single point multiplication on
+     typical inputs. Compiler support for the nonstandard type __uint128_t is
+     required to use this (present in gcc 4.4 and later, for 64-bit builds).
+     Code made available under Apache License version 2.0.
+
+     Specify "enable-ec_nistp_64_gcc_128" on the Configure (or config) command
+     line to include this in your build of OpenSSL, and run "make depend" (or
+     "make update"). This enables the following EC_METHODs:
+
+         EC_GFp_nistp224_method()
+         EC_GFp_nistp256_method()
+         EC_GFp_nistp521_method()
+
+     EC_GROUP_new_by_curve_name() will automatically use these (while
+     EC_GROUP_new_curve_GFp() currently prefers the more flexible
+     implementations).
+     [Emilia K<>sper, Adam Langley, Bodo Moeller (Google)]
+
+  *) Use type ossl_ssize_t instad of ssize_t which isn't available on
+     all platforms. Move ssize_t definition from e_os.h to the public
+     header file e_os2.h as it now appears in public header file cms.h
+     [Steve Henson]
+
+  *) New -sigopt option to the ca, req and x509 utilities. Additional
+     signature parameters can be passed using this option and in
+     particular PSS. 
+     [Steve Henson]
+
+  *) Add RSA PSS signing function. This will generate and set the
+     appropriate AlgorithmIdentifiers for PSS based on those in the
+     corresponding EVP_MD_CTX structure. No application support yet.
+     [Steve Henson]
+
+  *) Support for companion algorithm specific ASN1 signing routines.
+     New function ASN1_item_sign_ctx() signs a pre-initialised
+     EVP_MD_CTX structure and sets AlgorithmIdentifiers based on
+     the appropriate parameters.
+     [Steve Henson]
+
+  *) Add new algorithm specific ASN1 verification initialisation function
+     to EVP_PKEY_ASN1_METHOD: this is not in EVP_PKEY_METHOD since the ASN1
+     handling will be the same no matter what EVP_PKEY_METHOD is used.
+     Add a PSS handler to support verification of PSS signatures: checked
+     against a number of sample certificates.
+     [Steve Henson]
+
+  *) Add signature printing for PSS. Add PSS OIDs.
+     [Steve Henson, Martin Kaiser <lists@kaiser.cx>]
+
+  *) Add algorithm specific signature printing. An individual ASN1 method
+     can now print out signatures instead of the standard hex dump. 
+
+     More complex signatures (e.g. PSS) can print out more meaningful
+     information. Include DSA version that prints out the signature
+     parameters r, s.
+     [Steve Henson]
+
+  *) Password based recipient info support for CMS library: implementing
+     RFC3211.
+     [Steve Henson]
+
+  *) Split password based encryption into PBES2 and PBKDF2 functions. This
+     neatly separates the code into cipher and PBE sections and is required
+     for some algorithms that split PBES2 into separate pieces (such as
+     password based CMS).
+     [Steve Henson]
+
+  *) Session-handling fixes:
+     - Fix handling of connections that are resuming with a session ID,
+       but also support Session Tickets.
+     - Fix a bug that suppressed issuing of a new ticket if the client
+       presented a ticket with an expired session.
+     - Try to set the ticket lifetime hint to something reasonable.
+     - Make tickets shorter by excluding irrelevant information.
+     - On the client side, don't ignore renewed tickets.
+     [Adam Langley, Bodo Moeller (Google)]
+
+  *) Fix PSK session representation.
+     [Bodo Moeller]
+
+  *) Add RC4-MD5 and AESNI-SHA1 "stitched" implementations.
+
+     This work was sponsored by Intel.
+     [Andy Polyakov]
+
+  *) Add GCM support to TLS library. Some custom code is needed to split
+     the IV between the fixed (from PRF) and explicit (from TLS record)
+     portions. This adds all GCM ciphersuites supported by RFC5288 and 
+     RFC5289. Generalise some AES* cipherstrings to inlclude GCM and
+     add a special AESGCM string for GCM only.
+     [Steve Henson]
+
+  *) Expand range of ctrls for AES GCM. Permit setting invocation
+     field on decrypt and retrieval of invocation field only on encrypt.
+     [Steve Henson]
+
+  *) Add HMAC ECC ciphersuites from RFC5289. Include SHA384 PRF support.
+     As required by RFC5289 these ciphersuites cannot be used if for
+     versions of TLS earlier than 1.2.
+     [Steve Henson]
+
+  *) For FIPS capable OpenSSL interpret a NULL default public key method
+     as unset and return the appopriate default but do *not* set the default.
+     This means we can return the appopriate method in applications that
+     swicth between FIPS and non-FIPS modes.
+     [Steve Henson]
+
+  *) Redirect HMAC and CMAC operations to FIPS module in FIPS mode. If an
+     ENGINE is used then we cannot handle that in the FIPS module so we
+     keep original code iff non-FIPS operations are allowed.
+     [Steve Henson]
+
+  *) Add -attime option to openssl utilities.
+     [Peter Eckersley <pde@eff.org>, Ben Laurie and Steve Henson]
+
+  *) Redirect DSA and DH operations to FIPS module in FIPS mode.
+     [Steve Henson]
+
+  *) Redirect ECDSA and ECDH operations to FIPS module in FIPS mode. Also use
+     FIPS EC methods unconditionally for now.
+     [Steve Henson]
+
+  *) New build option no-ec2m to disable characteristic 2 code.
+     [Steve Henson]
+
+  *) Backport libcrypto audit of return value checking from 1.1.0-dev; not
+     all cases can be covered as some introduce binary incompatibilities.
+     [Steve Henson]
+
+  *) Redirect RSA operations to FIPS module including keygen,
+     encrypt, decrypt, sign and verify. Block use of non FIPS RSA methods.
+     [Steve Henson]
+
+  *) Add similar low level API blocking to ciphers.
+     [Steve Henson]
+
+  *) Low level digest APIs are not approved in FIPS mode: any attempt
+     to use these will cause a fatal error. Applications that *really* want
+     to use them can use the private_* version instead.
+     [Steve Henson]
+
+  *) Redirect cipher operations to FIPS module for FIPS builds. 
+     [Steve Henson]
+
+  *) Redirect digest operations to FIPS module for FIPS builds. 
+     [Steve Henson]
+
+  *) Update build system to add "fips" flag which will link in fipscanister.o
+     for static and shared library builds embedding a signature if needed.
+     [Steve Henson]
+
+  *) Output TLS supported curves in preference order instead of numerical
+     order. This is currently hardcoded for the highest order curves first.
+     This should be configurable so applications can judge speed vs strength.
+     [Steve Henson]
+
+  *) Add TLS v1.2 server support for client authentication. 
+     [Steve Henson]
+
+  *) Add support for FIPS mode in ssl library: disable SSLv3, non-FIPS ciphers
+     and enable MD5.
+     [Steve Henson]
+
+  *) Functions FIPS_mode_set() and FIPS_mode() which call the underlying
+     FIPS modules versions.
+     [Steve Henson]
+
+  *) Add TLS v1.2 client side support for client authentication. Keep cache
+     of handshake records longer as we don't know the hash algorithm to use
+     until after the certificate request message is received.
+     [Steve Henson]
+
+  *) Initial TLS v1.2 client support. Add a default signature algorithms
+     extension including all the algorithms we support. Parse new signature
+     format in client key exchange. Relax some ECC signing restrictions for
+     TLS v1.2 as indicated in RFC5246.
+     [Steve Henson]
+
+  *) Add server support for TLS v1.2 signature algorithms extension. Switch
+     to new signature format when needed using client digest preference.
+     All server ciphersuites should now work correctly in TLS v1.2. No client
+     support yet and no support for client certificates.
+     [Steve Henson]
+
+  *) Initial TLS v1.2 support. Add new SHA256 digest to ssl code, switch
+     to SHA256 for PRF when using TLS v1.2 and later. Add new SHA256 based
+     ciphersuites. At present only RSA key exchange ciphersuites work with
+     TLS v1.2. Add new option for TLS v1.2 replacing the old and obsolete
+     SSL_OP_PKCS1_CHECK flags with SSL_OP_NO_TLSv1_2. New TLSv1.2 methods
+     and version checking.
+     [Steve Henson]
+
+  *) New option OPENSSL_NO_SSL_INTERN. If an application can be compiled
+     with this defined it will not be affected by any changes to ssl internal
+     structures. Add several utility functions to allow openssl application
+     to work with OPENSSL_NO_SSL_INTERN defined.
+     [Steve Henson]
+
+  *) Add SRP support.
+     [Tom Wu <tjw@cs.stanford.edu> and Ben Laurie]
+
+  *) Add functions to copy EVP_PKEY_METHOD and retrieve flags and id.
+     [Steve Henson]
+
+  *) Permit abbreviated handshakes when renegotiating using the function
+     SSL_renegotiate_abbreviated().
+     [Robin Seggelmann <seggelmann@fh-muenster.de>]
+
+  *) Add call to ENGINE_register_all_complete() to
+     ENGINE_load_builtin_engines(), so some implementations get used
+     automatically instead of needing explicit application support.
+     [Steve Henson]
+
+  *) Add support for TLS key exporter as described in RFC5705.
+     [Robin Seggelmann <seggelmann@fh-muenster.de>, Steve Henson]
+
+  *) Initial TLSv1.1 support. Since TLSv1.1 is very similar to TLS v1.0 only
+     a few changes are required:
+
+       Add SSL_OP_NO_TLSv1_1 flag.
+       Add TLSv1_1 methods.
+       Update version checking logic to handle version 1.1.
+       Add explicit IV handling (ported from DTLS code).
+       Add command line options to s_client/s_server.
+     [Steve Henson]
+
+ Changes between 1.0.0g and 1.0.0h [12 Mar 2012]
+
+  *) Fix MMA (Bleichenbacher's attack on PKCS #1 v1.5 RSA padding) weakness
+     in CMS and PKCS7 code. When RSA decryption fails use a random key for
+     content decryption and always return the same error. Note: this attack
+     needs on average 2^20 messages so it only affects automated senders. The
+     old behaviour can be reenabled in the CMS code by setting the
+     CMS_DEBUG_DECRYPT flag: this is useful for debugging and testing where
+     an MMA defence is not necessary.
+     Thanks to Ivan Nestlerode <inestlerode@us.ibm.com> for discovering
+     this issue. (CVE-2012-0884)
+     [Steve Henson]
+
+  *) Fix CVE-2011-4619: make sure we really are receiving a 
+     client hello before rejecting multiple SGC restarts. Thanks to
+     Ivan Nestlerode <inestlerode@us.ibm.com> for discovering this bug.
+     [Steve Henson]
+
+ Changes between 1.0.0f and 1.0.0g [18 Jan 2012]
+
+  *) Fix for DTLS DoS issue introduced by fix for CVE-2011-4109.
+     Thanks to Antonio Martin, Enterprise Secure Access Research and
+     Development, Cisco Systems, Inc. for discovering this bug and
+     preparing a fix. (CVE-2012-0050)
+     [Antonio Martin]
+
+ Changes between 1.0.0e and 1.0.0f [4 Jan 2012]
+
+  *) Nadhem Alfardan and Kenny Paterson have discovered an extension
+     of the Vaudenay padding oracle attack on CBC mode encryption
+     which enables an efficient plaintext recovery attack against
+     the OpenSSL implementation of DTLS. Their attack exploits timing
+     differences arising during decryption processing. A research
+     paper describing this attack can be found at:
+                  http://www.isg.rhul.ac.uk/~kp/dtls.pdf
+     Thanks go to Nadhem Alfardan and Kenny Paterson of the Information
+     Security Group at Royal Holloway, University of London
+     (www.isg.rhul.ac.uk) for discovering this flaw and to Robin Seggelmann
+     <seggelmann@fh-muenster.de> and Michael Tuexen <tuexen@fh-muenster.de>
+     for preparing the fix. (CVE-2011-4108)
+     [Robin Seggelmann, Michael Tuexen]
+
+  *) Clear bytes used for block padding of SSL 3.0 records.
+     (CVE-2011-4576)
+     [Adam Langley (Google)]
+
+  *) Only allow one SGC handshake restart for SSL/TLS. Thanks to George
+     Kadianakis <desnacked@gmail.com> for discovering this issue and
+     Adam Langley for preparing the fix. (CVE-2011-4619)
+     [Adam Langley (Google)]
+
+  *) Check parameters are not NULL in GOST ENGINE. (CVE-2012-0027)
+     [Andrey Kulikov <amdeich@gmail.com>]
+
+  *) Prevent malformed RFC3779 data triggering an assertion failure.
+     Thanks to Andrew Chi, BBN Technologies, for discovering the flaw
+     and Rob Austein <sra@hactrn.net> for fixing it. (CVE-2011-4577)
+     [Rob Austein <sra@hactrn.net>]
+
+  *) Improved PRNG seeding for VOS.
+     [Paul Green <Paul.Green@stratus.com>]
+
+  *) Fix ssl_ciph.c set-up race.
+     [Adam Langley (Google)]
+
+  *) Fix spurious failures in ecdsatest.c.
+     [Emilia K<>sper (Google)]
+
+  *) Fix the BIO_f_buffer() implementation (which was mixing different
+     interpretations of the '..._len' fields).
+     [Adam Langley (Google)]
+
+  *) Fix handling of BN_BLINDING: now BN_BLINDING_invert_ex (rather than
+     BN_BLINDING_invert_ex) calls BN_BLINDING_update, ensuring that concurrent
+     threads won't reuse the same blinding coefficients.
+
+     This also avoids the need to obtain the CRYPTO_LOCK_RSA_BLINDING
+     lock to call BN_BLINDING_invert_ex, and avoids one use of
+     BN_BLINDING_update for each BN_BLINDING structure (previously,
+     the last update always remained unused).
+     [Emilia K<>sper (Google)]
+
+  *) In ssl3_clear, preserve s3->init_extra along with s3->rbuf.
+     [Bob Buckholz (Google)]
+
+ Changes between 1.0.0d and 1.0.0e [6 Sep 2011]
+
+  *) Fix bug where CRLs with nextUpdate in the past are sometimes accepted
+     by initialising X509_STORE_CTX properly. (CVE-2011-3207)
+     [Kaspar Brand <ossl@velox.ch>]
+
+  *) Fix SSL memory handling for (EC)DH ciphersuites, in particular
+     for multi-threaded use of ECDH. (CVE-2011-3210)
+     [Adam Langley (Google)]
+
+  *) Fix x509_name_ex_d2i memory leak on bad inputs.
+     [Bodo Moeller]
+
+  *) Remove hard coded ecdsaWithSHA1 signature tests in ssl code and check
+     signature public key algorithm by using OID xref utilities instead.
+     Before this you could only use some ECC ciphersuites with SHA1 only.
+     [Steve Henson]
+
+  *) Add protection against ECDSA timing attacks as mentioned in the paper
+     by Billy Bob Brumley and Nicola Tuveri, see:
+
+	http://eprint.iacr.org/2011/232.pdf
+
+     [Billy Bob Brumley and Nicola Tuveri]
+
+ Changes between 1.0.0c and 1.0.0d [8 Feb 2011]
+
+  *) Fix parsing of OCSP stapling ClientHello extension. CVE-2011-0014
+     [Neel Mehta, Adam Langley, Bodo Moeller (Google)]
+
+  *) Fix bug in string printing code: if *any* escaping is enabled we must
+     escape the escape character (backslash) or the resulting string is
+     ambiguous.
+     [Steve Henson]
+
+ Changes between 1.0.0b and 1.0.0c  [2 Dec 2010]
+
+  *) Disable code workaround for ancient and obsolete Netscape browsers
+     and servers: an attacker can use it in a ciphersuite downgrade attack.
+     Thanks to Martin Rex for discovering this bug. CVE-2010-4180
+     [Steve Henson]
+
+  *) Fixed J-PAKE implementation error, originally discovered by
+     Sebastien Martini, further info and confirmation from Stefan
+     Arentz and Feng Hao. Note that this fix is a security fix. CVE-2010-4252
+     [Ben Laurie]
+
+ Changes between 1.0.0a and 1.0.0b  [16 Nov 2010]
+
+  *) Fix extension code to avoid race conditions which can result in a buffer
+     overrun vulnerability: resumed sessions must not be modified as they can
+     be shared by multiple threads. CVE-2010-3864
+     [Steve Henson]
+
+  *) Fix WIN32 build system to correctly link an ENGINE directory into
+     a DLL. 
+     [Steve Henson]
+
+ Changes between 1.0.0 and 1.0.0a  [01 Jun 2010]
+
+  *) Check return value of int_rsa_verify in pkey_rsa_verifyrecover 
+     (CVE-2010-1633)
+     [Steve Henson, Peter-Michael Hager <hager@dortmund.net>]
+
+ Changes between 0.9.8n and 1.0.0  [29 Mar 2010]
+
+  *) Add "missing" function EVP_CIPHER_CTX_copy(). This copies a cipher
+     context. The operation can be customised via the ctrl mechanism in
+     case ENGINEs want to include additional functionality.
+     [Steve Henson]
+
+  *) Tolerate yet another broken PKCS#8 key format: private key value negative.
+     [Steve Henson]
+
+  *) Add new -subject_hash_old and -issuer_hash_old options to x509 utility to
+     output hashes compatible with older versions of OpenSSL.
+     [Willy Weisz <weisz@vcpc.univie.ac.at>]
+
+  *) Fix compression algorithm handling: if resuming a session use the
+     compression algorithm of the resumed session instead of determining
+     it from client hello again. Don't allow server to change algorithm.
+     [Steve Henson]
+
+  *) Add load_crls() function to apps tidying load_certs() too. Add option
+     to verify utility to allow additional CRLs to be included.
+     [Steve Henson]
+
+  *) Update OCSP request code to permit adding custom headers to the request:
+     some responders need this.
+     [Steve Henson]
+
+  *) The function EVP_PKEY_sign() returns <=0 on error: check return code
+     correctly.
+     [Julia Lawall <julia@diku.dk>]
+
+  *) Update verify callback code in apps/s_cb.c and apps/verify.c, it
+     needlessly dereferenced structures, used obsolete functions and
+     didn't handle all updated verify codes correctly.
+     [Steve Henson]
+
+  *) Disable MD2 in the default configuration.
+     [Steve Henson]
+
+  *) In BIO_pop() and BIO_push() use the ctrl argument (which was NULL) to
+     indicate the initial BIO being pushed or popped. This makes it possible
+     to determine whether the BIO is the one explicitly called or as a result
+     of the ctrl being passed down the chain. Fix BIO_pop() and SSL BIOs so
+     it handles reference counts correctly and doesn't zero out the I/O bio
+     when it is not being explicitly popped. WARNING: applications which
+     included workarounds for the old buggy behaviour will need to be modified
+     or they could free up already freed BIOs.
+     [Steve Henson]
+
+  *) Extend the uni2asc/asc2uni => OPENSSL_uni2asc/OPENSSL_asc2uni
+     renaming to all platforms (within the 0.9.8 branch, this was
+     done conditionally on Netware platforms to avoid a name clash).
+     [Guenter <lists@gknw.net>]
+
+  *) Add ECDHE and PSK support to DTLS.
+     [Michael Tuexen <tuexen@fh-muenster.de>]
+
+  *) Add CHECKED_STACK_OF macro to safestack.h, otherwise safestack can't
+     be used on C++.
+     [Steve Henson]
+
+  *) Add "missing" function EVP_MD_flags() (without this the only way to
+     retrieve a digest flags is by accessing the structure directly. Update
+     EVP_MD_do_all*() and EVP_CIPHER_do_all*() to include the name a digest
+     or cipher is registered as in the "from" argument. Print out all
+     registered digests in the dgst usage message instead of manually 
+     attempting to work them out.
+     [Steve Henson]
+
+  *) If no SSLv2 ciphers are used don't use an SSLv2 compatible client hello:
+     this allows the use of compression and extensions. Change default cipher
+     string to remove SSLv2 ciphersuites. This effectively avoids ancient SSLv2
+     by default unless an application cipher string requests it.
+     [Steve Henson]
+
+  *) Alter match criteria in PKCS12_parse(). It used to try to use local
+     key ids to find matching certificates and keys but some PKCS#12 files
+     don't follow the (somewhat unwritten) rules and this strategy fails.
+     Now just gather all certificates together and the first private key
+     then look for the first certificate that matches the key.
+     [Steve Henson]
+
+  *) Support use of registered digest and cipher names for dgst and cipher
+     commands instead of having to add each one as a special case. So now
+     you can do:
+
+        openssl sha256 foo
+
+     as well as:
+
+        openssl dgst -sha256 foo
+
+     and this works for ENGINE based algorithms too.
+
+     [Steve Henson]
 
   *) Update Gost ENGINE to support parameter files.
      [Victor B. Wagner <vitus@cryptocom.ru>]
@@ -749,7 +1347,349 @@
   *) Change 'Configure' script to enable Camellia by default.
      [NTT]
 
- Changes between 0.9.8j and 0.9.8k  [xx XXX xxxx]
+ Changes between 0.9.8s and 0.9.8t [18 Jan 2012]
+
+  *) Fix for DTLS DoS issue introduced by fix for CVE-2011-4109.
+     Thanks to Antonio Martin, Enterprise Secure Access Research and
+     Development, Cisco Systems, Inc. for discovering this bug and
+     preparing a fix. (CVE-2012-0050)
+     [Antonio Martin]
+  
+ Changes between 0.9.8r and 0.9.8s [4 Jan 2012]
+
+  *) Nadhem Alfardan and Kenny Paterson have discovered an extension
+     of the Vaudenay padding oracle attack on CBC mode encryption
+     which enables an efficient plaintext recovery attack against
+     the OpenSSL implementation of DTLS. Their attack exploits timing
+     differences arising during decryption processing. A research
+     paper describing this attack can be found at:
+                  http://www.isg.rhul.ac.uk/~kp/dtls.pdf
+     Thanks go to Nadhem Alfardan and Kenny Paterson of the Information
+     Security Group at Royal Holloway, University of London
+     (www.isg.rhul.ac.uk) for discovering this flaw and to Robin Seggelmann
+     <seggelmann@fh-muenster.de> and Michael Tuexen <tuexen@fh-muenster.de>
+     for preparing the fix. (CVE-2011-4108)
+     [Robin Seggelmann, Michael Tuexen]
+
+  *) Stop policy check failure freeing same buffer twice. (CVE-2011-4109)
+     [Ben Laurie, Kasper <ekasper@google.com>]
+
+  *) Clear bytes used for block padding of SSL 3.0 records.
+     (CVE-2011-4576)
+     [Adam Langley (Google)]
+
+  *) Only allow one SGC handshake restart for SSL/TLS. Thanks to George
+     Kadianakis <desnacked@gmail.com> for discovering this issue and
+     Adam Langley for preparing the fix. (CVE-2011-4619)
+     [Adam Langley (Google)]
+ 
+  *) Prevent malformed RFC3779 data triggering an assertion failure.
+     Thanks to Andrew Chi, BBN Technologies, for discovering the flaw
+     and Rob Austein <sra@hactrn.net> for fixing it. (CVE-2011-4577)
+     [Rob Austein <sra@hactrn.net>]
+
+  *) Fix ssl_ciph.c set-up race.
+     [Adam Langley (Google)]
+
+  *) Fix spurious failures in ecdsatest.c.
+     [Emilia K<>sper (Google)]
+
+  *) Fix the BIO_f_buffer() implementation (which was mixing different
+     interpretations of the '..._len' fields).
+     [Adam Langley (Google)]
+
+  *) Fix handling of BN_BLINDING: now BN_BLINDING_invert_ex (rather than
+     BN_BLINDING_invert_ex) calls BN_BLINDING_update, ensuring that concurrent
+     threads won't reuse the same blinding coefficients.
+
+     This also avoids the need to obtain the CRYPTO_LOCK_RSA_BLINDING
+     lock to call BN_BLINDING_invert_ex, and avoids one use of
+     BN_BLINDING_update for each BN_BLINDING structure (previously,
+     the last update always remained unused).
+     [Emilia K<>sper (Google)]
+
+  *) Fix SSL memory handling for (EC)DH ciphersuites, in particular
+     for multi-threaded use of ECDH.
+     [Adam Langley (Google)]
+
+  *) Fix x509_name_ex_d2i memory leak on bad inputs.
+     [Bodo Moeller]
+
+  *) Add protection against ECDSA timing attacks as mentioned in the paper
+     by Billy Bob Brumley and Nicola Tuveri, see:
+
+	http://eprint.iacr.org/2011/232.pdf
+
+     [Billy Bob Brumley and Nicola Tuveri]
+
+ Changes between 0.9.8q and 0.9.8r [8 Feb 2011]
+
+  *) Fix parsing of OCSP stapling ClientHello extension. CVE-2011-0014
+     [Neel Mehta, Adam Langley, Bodo Moeller (Google)]
+
+  *) Fix bug in string printing code: if *any* escaping is enabled we must
+     escape the escape character (backslash) or the resulting string is
+     ambiguous.
+     [Steve Henson]
+
+ Changes between 0.9.8p and 0.9.8q [2 Dec 2010]
+
+  *) Disable code workaround for ancient and obsolete Netscape browsers
+     and servers: an attacker can use it in a ciphersuite downgrade attack.
+     Thanks to Martin Rex for discovering this bug. CVE-2010-4180
+     [Steve Henson]
+
+  *) Fixed J-PAKE implementation error, originally discovered by
+     Sebastien Martini, further info and confirmation from Stefan
+     Arentz and Feng Hao. Note that this fix is a security fix. CVE-2010-4252
+     [Ben Laurie]
+
+ Changes between 0.9.8o and 0.9.8p [16 Nov 2010]
+
+  *) Fix extension code to avoid race conditions which can result in a buffer
+     overrun vulnerability: resumed sessions must not be modified as they can
+     be shared by multiple threads. CVE-2010-3864
+     [Steve Henson]
+
+  *) Fix for double free bug in ssl/s3_clnt.c CVE-2010-2939
+     [Steve Henson]
+
+  *) Don't reencode certificate when calculating signature: cache and use
+     the original encoding instead. This makes signature verification of
+     some broken encodings work correctly.
+     [Steve Henson]
+
+  *) ec2_GF2m_simple_mul bugfix: compute correct result if the output EC_POINT
+     is also one of the inputs.
+     [Emilia K<>sper <emilia.kasper@esat.kuleuven.be> (Google)]
+
+  *) Don't repeatedly append PBE algorithms to table if they already exist.
+     Sort table on each new add. This effectively makes the table read only
+     after all algorithms are added and subsequent calls to PKCS12_pbe_add
+     etc are non-op.
+     [Steve Henson]
+
+ Changes between 0.9.8n and 0.9.8o [01 Jun 2010]
+
+  [NB: OpenSSL 0.9.8o and later 0.9.8 patch levels were released after
+  OpenSSL 1.0.0.]
+
+  *) Correct a typo in the CMS ASN1 module which can result in invalid memory
+     access or freeing data twice (CVE-2010-0742)
+     [Steve Henson, Ronald Moesbergen <intercommit@gmail.com>]
+
+  *) Add SHA2 algorithms to SSL_library_init(). SHA2 is becoming far more
+     common in certificates and some applications which only call
+     SSL_library_init and not OpenSSL_add_all_algorithms() will fail.
+     [Steve Henson]
+
+  *) VMS fixes: 
+     Reduce copying into .apps and .test in makevms.com
+     Don't try to use blank CA certificate in CA.com
+     Allow use of C files from original directories in maketests.com
+     [Steven M. Schweda" <sms@antinode.info>]
+
+ Changes between 0.9.8m and 0.9.8n [24 Mar 2010]
+
+  *) When rejecting SSL/TLS records due to an incorrect version number, never
+     update s->server with a new major version number.  As of
+     - OpenSSL 0.9.8m if 'short' is a 16-bit type,
+     - OpenSSL 0.9.8f if 'short' is longer than 16 bits,
+     the previous behavior could result in a read attempt at NULL when
+     receiving specific incorrect SSL/TLS records once record payload
+     protection is active.  (CVE-2010-0740)
+     [Bodo Moeller, Adam Langley <agl@chromium.org>]
+
+  *) Fix for CVE-2010-0433 where some kerberos enabled versions of OpenSSL 
+     could be crashed if the relevant tables were not present (e.g. chrooted).
+     [Tomas Hoger <thoger@redhat.com>]
+
+ Changes between 0.9.8l and 0.9.8m [25 Feb 2010]
+
+  *) Always check bn_wexpend() return values for failure.  (CVE-2009-3245)
+     [Martin Olsson, Neel Mehta]
+
+  *) Fix X509_STORE locking: Every 'objs' access requires a lock (to
+     accommodate for stack sorting, always a write lock!).
+     [Bodo Moeller]
+
+  *) On some versions of WIN32 Heap32Next is very slow. This can cause
+     excessive delays in the RAND_poll(): over a minute. As a workaround
+     include a time check in the inner Heap32Next loop too.
+     [Steve Henson]
+
+  *) The code that handled flushing of data in SSL/TLS originally used the
+     BIO_CTRL_INFO ctrl to see if any data was pending first. This caused
+     the problem outlined in PR#1949. The fix suggested there however can
+     trigger problems with buggy BIO_CTRL_WPENDING (e.g. some versions
+     of Apache). So instead simplify the code to flush unconditionally.
+     This should be fine since flushing with no data to flush is a no op.
+     [Steve Henson]
+
+  *) Handle TLS versions 2.0 and later properly and correctly use the
+     highest version of TLS/SSL supported. Although TLS >= 2.0 is some way
+     off ancient servers have a habit of sticking around for a while...
+     [Steve Henson]
+
+  *) Modify compression code so it frees up structures without using the
+     ex_data callbacks. This works around a problem where some applications
+     call CRYPTO_cleanup_all_ex_data() before application exit (e.g. when
+     restarting) then use compression (e.g. SSL with compression) later.
+     This results in significant per-connection memory leaks and
+     has caused some security issues including CVE-2008-1678 and
+     CVE-2009-4355.
+     [Steve Henson]
+
+  *) Constify crypto/cast (i.e., <openssl/cast.h>): a CAST_KEY doesn't
+     change when encrypting or decrypting.
+     [Bodo Moeller]
+
+  *) Add option SSL_OP_LEGACY_SERVER_CONNECT which will allow clients to
+     connect and renegotiate with servers which do not support RI.
+     Until RI is more widely deployed this option is enabled by default.
+     [Steve Henson]
+
+  *) Add "missing" ssl ctrls to clear options and mode.
+     [Steve Henson]
+
+  *) If client attempts to renegotiate and doesn't support RI respond with
+     a no_renegotiation alert as required by RFC5746.  Some renegotiating
+     TLS clients will continue a connection gracefully when they receive
+     the alert. Unfortunately OpenSSL mishandled this alert and would hang
+     waiting for a server hello which it will never receive. Now we treat a
+     received no_renegotiation alert as a fatal error. This is because
+     applications requesting a renegotiation might well expect it to succeed
+     and would have no code in place to handle the server denying it so the
+     only safe thing to do is to terminate the connection.
+     [Steve Henson]
+
+  *) Add ctrl macro SSL_get_secure_renegotiation_support() which returns 1 if
+     peer supports secure renegotiation and 0 otherwise. Print out peer
+     renegotiation support in s_client/s_server.
+     [Steve Henson]
+
+  *) Replace the highly broken and deprecated SPKAC certification method with
+     the updated NID creation version. This should correctly handle UTF8.
+     [Steve Henson]
+
+  *) Implement RFC5746. Re-enable renegotiation but require the extension
+     as needed. Unfortunately, SSL3_FLAGS_ALLOW_UNSAFE_LEGACY_RENEGOTIATION
+     turns out to be a bad idea. It has been replaced by
+     SSL_OP_ALLOW_UNSAFE_LEGACY_RENEGOTIATION which can be set with
+     SSL_CTX_set_options(). This is really not recommended unless you
+     know what you are doing.
+     [Eric Rescorla <ekr@networkresonance.com>, Ben Laurie, Steve Henson]
+
+  *) Fixes to stateless session resumption handling. Use initial_ctx when
+     issuing and attempting to decrypt tickets in case it has changed during
+     servername handling. Use a non-zero length session ID when attempting
+     stateless session resumption: this makes it possible to determine if
+     a resumption has occurred immediately after receiving server hello
+     (several places in OpenSSL subtly assume this) instead of later in
+     the handshake.
+     [Steve Henson]
+
+  *) The functions ENGINE_ctrl(), OPENSSL_isservice(),
+     CMS_get1_RecipientRequest() and RAND_bytes() can return <=0 on error
+     fixes for a few places where the return code is not checked
+     correctly.
+     [Julia Lawall <julia@diku.dk>]
+
+  *) Add --strict-warnings option to Configure script to include devteam
+     warnings in other configurations.
+     [Steve Henson]
+
+  *) Add support for --libdir option and LIBDIR variable in makefiles. This
+     makes it possible to install openssl libraries in locations which
+     have names other than "lib", for example "/usr/lib64" which some
+     systems need.
+     [Steve Henson, based on patch from Jeremy Utley]
+
+  *) Don't allow the use of leading 0x80 in OIDs. This is a violation of
+     X690 8.9.12 and can produce some misleading textual output of OIDs.
+     [Steve Henson, reported by Dan Kaminsky]
+
+  *) Delete MD2 from algorithm tables. This follows the recommendation in
+     several standards that it is not used in new applications due to
+     several cryptographic weaknesses. For binary compatibility reasons
+     the MD2 API is still compiled in by default.
+     [Steve Henson]
+
+  *) Add compression id to {d2i,i2d}_SSL_SESSION so it is correctly saved
+     and restored.
+     [Steve Henson]
+
+  *) Rename uni2asc and asc2uni functions to OPENSSL_uni2asc and
+     OPENSSL_asc2uni conditionally on Netware platforms to avoid a name
+     clash.
+     [Guenter <lists@gknw.net>]
+
+  *) Fix the server certificate chain building code to use X509_verify_cert(),
+     it used to have an ad-hoc builder which was unable to cope with anything
+     other than a simple chain.
+     [David Woodhouse <dwmw2@infradead.org>, Steve Henson]
+
+  *) Don't check self signed certificate signatures in X509_verify_cert()
+     by default (a flag can override this): it just wastes time without
+     adding any security. As a useful side effect self signed root CAs
+     with non-FIPS digests are now usable in FIPS mode.
+     [Steve Henson]
+
+  *) In dtls1_process_out_of_seq_message() the check if the current message
+     is already buffered was missing. For every new message was memory
+     allocated, allowing an attacker to perform an denial of service attack
+     with sending out of seq handshake messages until there is no memory
+     left. Additionally every future messege was buffered, even if the
+     sequence number made no sense and would be part of another handshake.
+     So only messages with sequence numbers less than 10 in advance will be
+     buffered.  (CVE-2009-1378)
+     [Robin Seggelmann, discovered by Daniel Mentz] 	
+
+  *) Records are buffered if they arrive with a future epoch to be
+     processed after finishing the corresponding handshake. There is
+     currently no limitation to this buffer allowing an attacker to perform
+     a DOS attack with sending records with future epochs until there is no
+     memory left. This patch adds the pqueue_size() function to detemine
+     the size of a buffer and limits the record buffer to 100 entries.
+     (CVE-2009-1377)
+     [Robin Seggelmann, discovered by Daniel Mentz] 	
+
+  *) Keep a copy of frag->msg_header.frag_len so it can be used after the
+     parent structure is freed.  (CVE-2009-1379)
+     [Daniel Mentz] 	
+
+  *) Handle non-blocking I/O properly in SSL_shutdown() call.
+     [Darryl Miles <darryl-mailinglists@netbauds.net>]
+
+  *) Add 2.5.4.* OIDs
+     [Ilya O. <vrghost@gmail.com>]
+
+ Changes between 0.9.8k and 0.9.8l  [5 Nov 2009]
+
+  *) Disable renegotiation completely - this fixes a severe security
+     problem (CVE-2009-3555) at the cost of breaking all
+     renegotiation. Renegotiation can be re-enabled by setting
+     SSL3_FLAGS_ALLOW_UNSAFE_LEGACY_RENEGOTIATION in s3->flags at
+     run-time. This is really not recommended unless you know what
+     you're doing.
+     [Ben Laurie]
+
+ Changes between 0.9.8j and 0.9.8k  [25 Mar 2009]
+
+  *) Don't set val to NULL when freeing up structures, it is freed up by
+     underlying code. If sizeof(void *) > sizeof(long) this can result in
+     zeroing past the valid field. (CVE-2009-0789)
+     [Paolo Ganci <Paolo.Ganci@AdNovum.CH>]
+
+  *) Fix bug where return value of CMS_SignerInfo_verify_content() was not
+     checked correctly. This would allow some invalid signed attributes to
+     appear to verify correctly. (CVE-2009-0591)
+     [Ivan Nestlerode <inestlerode@us.ibm.com>]
+
+  *) Reject UniversalString and BMPString types with invalid lengths. This
+     prevents a crash in ASN1_STRING_print_ex() which assumes the strings have
+     a legal length. (CVE-2009-0590)
+     [Steve Henson]
 
   *) Set S/MIME signing as the default purpose rather than setting it 
      unconditionally. This allows applications to override it at the store
@@ -772,12 +1712,12 @@
 
   *) Support NumericString type for name components.
      [Steve Henson]
-  
+
   *) Allow CC in the environment to override the automatically chosen
      compiler. Note that nothing is done to ensure flags work with the
      chosen compiler.
      [Ben Laurie]
-  
+
  Changes between 0.9.8i and 0.9.8j  [07 Jan 2009]
 
   *) Properly check EVP_VerifyFinal() and similar return values
@@ -818,6 +1758,10 @@
 
  Changes between 0.9.8h and 0.9.8i  [15 Sep 2008]
 
+  *) Fix NULL pointer dereference if a DTLS server received
+     ChangeCipherSpec as first record (CVE-2009-1386).
+     [PR #1679]
+
   *) Fix a state transitition in s3_srvr.c and d1_srvr.c
      (was using SSL3_ST_CW_CLNT_HELLO_B, should be ..._ST_SW_SRVR_...).
      [Nagendra Modadugu]
@@ -2221,19 +3165,6 @@
      differing sizes.
      [Richard Levitte]
 
- Changes between 0.9.7m and 0.9.7n  [xx XXX xxxx]
-
-  *) In the SSL/TLS server implementation, be strict about session ID
-     context matching (which matters if an application uses a single
-     external cache for different purposes).  Previously,
-     out-of-context reuse was forbidden only if SSL_VERIFY_PEER was
-     set.  This did ensure strict client verification, but meant that,
-     with applications using a single external cache for quite
-     different requirements, clients could circumvent ciphersuite
-     restrictions for a given session ID context by starting a session
-     in a different context.
-     [Bodo Moeller]
-
  Changes between 0.9.7l and 0.9.7m  [23 Feb 2007]
 
   *) Cleanse PEM buffers before freeing them since they may contain 

CHANGES.SSLeay

@@ -148,7 +148,7 @@ eric (about to go bushwalking for the 4 day easter break :-)
       This would tend to cause memory overwrites since SSLv3 has
       a maximum packet size of 16k.  If your program uses
       buffers <= 16k, you would probably never see this problem.
-    - Fixed a new errors that were cause by malloc() not returning
+    - Fixed a few errors that were cause by malloc() not returning
       0 initialised memory..
     - SSL_OP_NETSCAPE_CA_DN_BUG was being switched on when using
       SSL_CTX_set_options(ssl_ctx,SSL_OP_ALL); which was a bad thing

Configure

@@ -10,7 +10,7 @@ use strict;
 
 # see INSTALL for instructions.
 
-my $usage="Usage: Configure [no-<cipher> ...] [enable-<cipher> ...] [experimental-<cipher> ...] [-Dxxx] [-lxxx] [-Lxxx] [-fxxx] [-Kxxx] [no-hw-xxx|no-hw] [[no-]threads] [[no-]shared] [[no-]zlib|zlib-dynamic] [no-asm] [no-dso] [no-krb5] [386] [--prefix=DIR] [--openssldir=OPENSSLDIR] [--with-xxx[=vvv]] [--test-sanity] os/compiler[:flags]\n";
+my $usage="Usage: Configure [no-<cipher> ...] [enable-<cipher> ...] [experimental-<cipher> ...] [-Dxxx] [-lxxx] [-Lxxx] [-fxxx] [-Kxxx] [no-hw-xxx|no-hw] [[no-]threads] [[no-]shared] [[no-]zlib|zlib-dynamic] [no-asm] [no-dso] [no-krb5] [sctp] [386] [--prefix=DIR] [--openssldir=OPENSSLDIR] [--with-xxx[=vvv]] [--test-sanity] os/compiler[:flags]\n";
 
 # Options:
 #
@@ -56,6 +56,7 @@ my $usage="Usage: Configure [no-<cipher> ...] [enable-<cipher> ...] [experimenta
 # [no-]zlib     [don't] compile support for zlib compression.
 # zlib-dynamic	Like "zlib", but the zlib library is expected to be a shared
 #		library and will be loaded in run-time by the OpenSSL library.
+# sctp          include SCTP support
 # 386           generate 80386 code
 # no-sse2	disables IA-32 SSE2 code, above option implies no-sse2
 # no-<cipher>   build without specified algorithm (rsa, idea, rc5, ...)
@@ -104,6 +105,8 @@ my $usage="Usage: Configure [no-<cipher> ...] [enable-<cipher> ...] [experimenta
 
 my $gcc_devteam_warn = "-Wall -pedantic -DPEDANTIC -Wno-long-long -Wsign-compare -Wmissing-prototypes -Wshadow -Wformat -Werror -DCRYPTO_MDEBUG_ALL -DCRYPTO_MDEBUG_ABORT -DREF_CHECK -DOPENSSL_NO_DEPRECATED";
 
+my $strict_warnings = 0;
+
 my $x86_gcc_des="DES_PTR DES_RISC1 DES_UNROLL";
 
 # MD2_CHAR slags pentium pros
@@ -121,21 +124,24 @@ my $tlib="-lnsl -lsocket";
 my $bits1="THIRTY_TWO_BIT ";
 my $bits2="SIXTY_FOUR_BIT ";
 
-my $x86_asm="x86cpuid.o:bn-586.o co-586.o x86-mont.o:des-586.o crypt586.o:aes-586.o:bf-586.o:md5-586.o:sha1-586.o sha256-586.o sha512-586.o:cast-586.o:rc4-586.o:rmd-586.o:rc5-586.o:wp_block.o wp-mmx.o:cmll-x86.o";
+my $x86_asm="x86cpuid.o:bn-586.o co-586.o x86-mont.o x86-gf2m.o:des-586.o crypt586.o:aes-586.o vpaes-x86.o aesni-x86.o:bf-586.o:md5-586.o:sha1-586.o sha256-586.o sha512-586.o:cast-586.o:rc4-586.o:rmd-586.o:rc5-586.o:wp_block.o wp-mmx.o:cmll-x86.o:ghash-x86.o:";
 
 my $x86_elf_asm="$x86_asm:elf";
 
-my $x86_64_asm="x86_64cpuid.o:x86_64-gcc.o x86_64-mont.o::aes-x86_64.o::md5-x86_64.o:sha1-x86_64.o sha256-x86_64.o sha512-x86_64.o::rc4-x86_64.o:::wp-x86_64.o:cmll-x86_64.o cmll_misc.o";
-my $ia64_asm="ia64cpuid.o:bn-ia64.o::aes_core.o aes_cbc.o aes-ia64.o::md5-ia64.o:sha1-ia64.o sha256-ia64.o sha512-ia64.o::rc4-ia64.o rc4_skey.o:::::void";
-my $sparcv9_asm="sparcv9cap.o sparccpuid.o:bn-sparcv9.o sparcv9-mont.o sparcv9a-mont.o:des_enc-sparc.o fcrypt_b.o:aes_core.o aes_cbc.o aes-sparcv9.o:::sha1-sparcv9.o sha256-sparcv9.o sha512-sparcv9.o:::::::void";
-my $sparcv8_asm=":sparcv8.o:des_enc-sparc.o fcrypt_b.o:::::::::::void";
-my $alpha_asm="alphacpuid.o:bn_asm.o alpha-mont.o::::::::::::void";
-my $mips3_asm=":bn-mips3.o::::::::::::void";
-my $s390x_asm="s390xcpuid.o:bn-s390x.o s390x-mont.o::aes-s390x.o:::sha1-s390x.o sha256-s390x.o sha512-s390x.o::rc4-s390x.o:::::void";
-my $armv4_asm=":bn_asm.o armv4-mont.o::aes_cbc.o aes-armv4.o:::sha1-armv4-large.o sha256-armv4.o sha512-armv4.o:::::::void";
-my $ppc32_asm="ppccpuid.o:bn-ppc.o::aes_core.o aes_cbc.o aes-ppc.o:::sha1-ppc.o sha256-ppc.o::::::";
-my $ppc64_asm="ppccpuid.o:bn-ppc.o ppc-mont.o::aes_core.o aes_cbc.o aes-ppc.o:::sha1-ppc.o sha256-ppc.o sha512-ppc.o::::::";
-my $no_asm=":::::::::::::void";
+my $x86_64_asm="x86_64cpuid.o:x86_64-gcc.o x86_64-mont.o x86_64-mont5.o x86_64-gf2m.o modexp512-x86_64.o::aes-x86_64.o vpaes-x86_64.o bsaes-x86_64.o aesni-x86_64.o aesni-sha1-x86_64.o::md5-x86_64.o:sha1-x86_64.o sha256-x86_64.o sha512-x86_64.o::rc4-x86_64.o rc4-md5-x86_64.o:::wp-x86_64.o:cmll-x86_64.o cmll_misc.o:ghash-x86_64.o:";
+my $ia64_asm="ia64cpuid.o:bn-ia64.o ia64-mont.o::aes_core.o aes_cbc.o aes-ia64.o::md5-ia64.o:sha1-ia64.o sha256-ia64.o sha512-ia64.o::rc4-ia64.o rc4_skey.o:::::ghash-ia64.o::void";
+my $sparcv9_asm="sparcv9cap.o sparccpuid.o:bn-sparcv9.o sparcv9-mont.o sparcv9a-mont.o:des_enc-sparc.o fcrypt_b.o:aes_core.o aes_cbc.o aes-sparcv9.o:::sha1-sparcv9.o sha256-sparcv9.o sha512-sparcv9.o:::::::ghash-sparcv9.o::void";
+my $sparcv8_asm=":sparcv8.o:des_enc-sparc.o fcrypt_b.o:::::::::::::void";
+my $alpha_asm="alphacpuid.o:bn_asm.o alpha-mont.o:::::sha1-alpha.o:::::::ghash-alpha.o::void";
+my $mips32_asm=":bn-mips.o::aes_cbc.o aes-mips.o:::sha1-mips.o sha256-mips.o::::::::";
+my $mips64_asm=":bn-mips.o mips-mont.o::aes_cbc.o aes-mips.o:::sha1-mips.o sha256-mips.o sha512-mips.o::::::::";
+my $s390x_asm="s390xcap.o s390xcpuid.o:bn-s390x.o s390x-mont.o s390x-gf2m.o::aes-s390x.o aes-ctr.o aes-xts.o:::sha1-s390x.o sha256-s390x.o sha512-s390x.o::rc4-s390x.o:::::ghash-s390x.o:";
+my $armv4_asm="armcap.o armv4cpuid.o:bn_asm.o armv4-mont.o armv4-gf2m.o::aes_cbc.o aes-armv4.o:::sha1-armv4-large.o sha256-armv4.o sha512-armv4.o:::::::ghash-armv4.o::void";
+my $parisc11_asm="pariscid.o:bn_asm.o parisc-mont.o::aes_core.o aes_cbc.o aes-parisc.o:::sha1-parisc.o sha256-parisc.o sha512-parisc.o::rc4-parisc.o:::::ghash-parisc.o::32";
+my $parisc20_asm="pariscid.o:pa-risc2W.o parisc-mont.o::aes_core.o aes_cbc.o aes-parisc.o:::sha1-parisc.o sha256-parisc.o sha512-parisc.o::rc4-parisc.o:::::ghash-parisc.o::64";
+my $ppc32_asm="ppccpuid.o ppccap.o:bn-ppc.o ppc-mont.o ppc64-mont.o::aes_core.o aes_cbc.o aes-ppc.o:::sha1-ppc.o sha256-ppc.o::::::::";
+my $ppc64_asm="ppccpuid.o ppccap.o:bn-ppc.o ppc-mont.o ppc64-mont.o::aes_core.o aes_cbc.o aes-ppc.o:::sha1-ppc.o sha256-ppc.o sha512-ppc.o::::::::";
+my $no_asm=":::::::::::::::void";
 
 # As for $BSDthreads. Idea is to maintain "collective" set of flags,
 # which would cover all BSD flavors. -pthread applies to them all, 
@@ -146,7 +152,7 @@ my $no_asm=":::::::::::::void";
 # seems to be sufficient?
 my $BSDthreads="-pthread -D_THREAD_SAFE -D_REENTRANT";
 
-#config-string	$cc : $cflags : $unistd : $thread_cflag : $sys_id : $lflags : $bn_ops : $cpuid_obj : $bn_obj : $des_obj : $aes_obj : $bf_obj : $md5_obj : $sha1_obj : $cast_obj : $rc4_obj : $rmd160_obj : $rc5_obj : $wp_obj : $cmll_obj : $dso_scheme : $shared_target : $shared_cflag : $shared_ldflag : $shared_extension : $ranlib : $arflags : $multilib
+#config-string	$cc : $cflags : $unistd : $thread_cflag : $sys_id : $lflags : $bn_ops : $cpuid_obj : $bn_obj : $des_obj : $aes_obj : $bf_obj : $md5_obj : $sha1_obj : $cast_obj : $rc4_obj : $rmd160_obj : $rc5_obj : $wp_obj : $cmll_obj : $modes_obj : $engines_obj : $dso_scheme : $shared_target : $shared_cflag : $shared_ldflag : $shared_extension : $ranlib : $arflags : $multilib
 
 my %table=(
 # File 'TABLE' (created by 'make TABLE') contains the data from this list,
@@ -161,29 +167,34 @@ my %table=(
 # Our development configs
 "purify",	"purify gcc:-g -DPURIFY -Wall::(unknown)::-lsocket -lnsl::::",
 "debug",	"gcc:-DBN_DEBUG -DREF_CHECK -DCONF_DEBUG -DBN_CTX_DEBUG -DCRYPTO_MDEBUG -DOPENSSL_NO_ASM -ggdb -g2 -Wformat -Wshadow -Wmissing-prototypes -Wmissing-declarations -Werror::(unknown)::-lefence::::",
-"debug-ben",	"gcc:-DBN_DEBUG -DREF_CHECK -DCONF_DEBUG -DBN_CTX_DEBUG -DCRYPTO_MDEBUG -DPEDANTIC -DDEBUG_SAFESTACK -O2 -pedantic -Wall -Wshadow -Werror -pipe::(unknown):::::bn86-elf.o co86-elf.o",
+"debug-ben",	"gcc:$gcc_devteam_warn -DBN_DEBUG -DREF_CHECK -DCONF_DEBUG -DBN_CTX_DEBUG -DCRYPTO_MDEBUG -DDEBUG_SAFESTACK -O2 -pipe::(unknown):::::",
 "debug-ben-openbsd","gcc:-DBN_DEBUG -DREF_CHECK -DCONF_DEBUG -DBN_CTX_DEBUG -DCRYPTO_MDEBUG -DPEDANTIC -DDEBUG_SAFESTACK -DOPENSSL_OPENBSD_DEV_CRYPTO -DOPENSSL_NO_ASM -O2 -pedantic -Wall -Wshadow -Werror -pipe::(unknown)::::",
 "debug-ben-openbsd-debug","gcc:-DBN_DEBUG -DREF_CHECK -DCONF_DEBUG -DBN_CTX_DEBUG -DCRYPTO_MDEBUG -DPEDANTIC -DDEBUG_SAFESTACK -DOPENSSL_OPENBSD_DEV_CRYPTO -DOPENSSL_NO_ASM -g3 -O2 -pedantic -Wall -Wshadow -Werror -pipe::(unknown)::::",
-"debug-ben-debug",	"gcc:$gcc_devteam_warn -DBN_DEBUG -DCONF_DEBUG -DBN_CTX_DEBUG -DDEBUG_SAFESTACK -g3 -O2 -pipe::(unknown)::::::",
+"debug-ben-debug",	"gcc44:$gcc_devteam_warn -DBN_DEBUG -DCONF_DEBUG -DDEBUG_SAFESTACK -DDEBUG_UNUSED -g3 -O2 -pipe::(unknown)::::::",
+"debug-ben-macos",	"cc:$gcc_devteam_warn -arch i386 -DBN_DEBUG -DCONF_DEBUG -DDEBUG_SAFESTACK -DDEBUG_UNUSED -DOPENSSL_THREADS -D_REENTRANT -DDSO_DLFCN -DHAVE_DLFCN_H -O3 -DL_ENDIAN -g3 -pipe::(unknown)::-Wl,-search_paths_first::::",
+"debug-ben-macos-gcc46",	"gcc-mp-4.6:$gcc_devteam_warn -Wconversion -DBN_DEBUG -DCONF_DEBUG -DDEBUG_SAFESTACK -DDEBUG_UNUSED -DOPENSSL_THREADS -D_REENTRANT -DDSO_DLFCN -DHAVE_DLFCN_H -O3 -DL_ENDIAN -g3 -pipe::(unknown)::::::",
 "debug-ben-no-opt",	"gcc: -Wall -Wmissing-prototypes -Wstrict-prototypes -Wmissing-declarations -DDEBUG_SAFESTACK -DCRYPTO_MDEBUG -Werror -DL_ENDIAN -DTERMIOS -Wall -g3::(unknown)::::::",
 "debug-ben-strict",	"gcc:-DBN_DEBUG -DREF_CHECK -DCONF_DEBUG -DBN_CTX_DEBUG -DCRYPTO_MDEBUG -DCONST_STRICT -O2 -Wall -Wshadow -Werror -Wpointer-arith -Wcast-qual -Wwrite-strings -pipe::(unknown)::::::",
 "debug-rse","cc:-DTERMIOS -DL_ENDIAN -pipe -O -g -ggdb3 -Wall::(unknown):::BN_LLONG ${x86_gcc_des} ${x86_gcc_opts}:${x86_elf_asm}",
-"debug-bodo",	"gcc:-DL_ENDIAN -DBN_DEBUG -DREF_CHECK -DCONF_DEBUG -DBIO_PAIR_DEBUG -DPEDANTIC -g -march=i486 -pedantic -Wshadow -Wall -Wcast-align -Wstrict-prototypes -Wmissing-prototypes -Wno-long-long -Wundef -Wconversion::-D_REENTRANT:::BN_LLONG ${x86_gcc_des} ${x86_gcc_opts}:${x86_elf_asm}",
+"debug-bodo",	"gcc:$gcc_devteam_warn -DBN_DEBUG -DBN_DEBUG_RAND -DCONF_DEBUG -DBIO_PAIR_DEBUG -m64 -DL_ENDIAN -DTERMIO -g -DMD32_REG_T=int::-D_REENTRANT::-ldl:SIXTY_FOUR_BIT_LONG RC4_CHUNK DES_INT DES_UNROLL:${x86_64_asm}:elf:dlfcn:linux-shared:-fPIC:-m64:.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR):::64",
 "debug-ulf", "gcc:-DTERMIOS -DL_ENDIAN -march=i486 -Wall -DBN_DEBUG -DBN_DEBUG_RAND -DREF_CHECK -DCONF_DEBUG -DBN_CTX_DEBUG -DCRYPTO_MDEBUG -DOPENSSL_NO_ASM -g -Wformat -Wshadow -Wmissing-prototypes -Wmissing-declarations:::CYGWIN32:::${no_asm}:win32:cygwin-shared:::.dll",
-"debug-steve64", "gcc:$gcc_devteam_warn -m64 -DL_ENDIAN -DTERMIO -DCONF_DEBUG -DDEBUG_SAFESTACK -g -DMD32_REG_T=int::-D_REENTRANT::-ldl:SIXTY_FOUR_BIT_LONG RC4_CHUNK BF_PTR2 DES_INT DES_UNROLL:${x86_64_asm}:elf:dlfcn:linux-shared:-fPIC:-m64:.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
+"debug-steve64", "gcc:$gcc_devteam_warn -m64 -DL_ENDIAN -DTERMIO -DCONF_DEBUG -DDEBUG_SAFESTACK -g::-D_REENTRANT::-ldl:SIXTY_FOUR_BIT_LONG RC4_CHUNK DES_INT DES_UNROLL:${x86_64_asm}:elf:dlfcn:linux-shared:-fPIC:-m64:.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
 "debug-steve32", "gcc:$gcc_devteam_warn -m32 -DL_ENDIAN -DCONF_DEBUG -DDEBUG_SAFESTACK -g -pipe::-D_REENTRANT::-rdynamic -ldl:BN_LLONG ${x86_gcc_des} ${x86_gcc_opts}:${x86_elf_asm}:dlfcn:linux-shared:-fPIC:-m32:.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
-"debug-steve-opt", "gcc:$gcc_devteam_warn -m64 -O3 -DL_ENDIAN -DTERMIO -DCONF_DEBUG -DDEBUG_SAFESTACK -g -DMD32_REG_T=int::-D_REENTRANT::-ldl:SIXTY_FOUR_BIT_LONG RC4_CHUNK BF_PTR2 DES_INT DES_UNROLL:${x86_64_asm}:elf:dlfcn:linux-shared:-fPIC:-m64:.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
+"debug-steve-opt", "gcc:$gcc_devteam_warn -m64 -O3 -DL_ENDIAN -DTERMIO -DCONF_DEBUG -DDEBUG_SAFESTACK -g::-D_REENTRANT::-ldl:SIXTY_FOUR_BIT_LONG RC4_CHUNK DES_INT DES_UNROLL:${x86_64_asm}:elf:dlfcn:linux-shared:-fPIC:-m64:.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
 "debug-levitte-linux-elf","gcc:-DLEVITTE_DEBUG -DREF_CHECK -DCONF_DEBUG -DBN_DEBUG -DBN_DEBUG_RAND -DCRYPTO_MDEBUG -DENGINE_CONF_DEBUG -DL_ENDIAN -DTERMIO -D_POSIX_SOURCE -DPEDANTIC -ggdb -g3 -mcpu=i486 -pedantic -ansi -Wall -Wshadow -Wcast-align -Wstrict-prototypes -Wmissing-prototypes -Wno-long-long -Wundef -Wconversion -pipe::-D_REENTRANT::-ldl:BN_LLONG ${x86_gcc_des} ${x86_gcc_opts}:${x86_elf_asm}:dlfcn:linux-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
 "debug-levitte-linux-noasm","gcc:-DLEVITTE_DEBUG -DREF_CHECK -DCONF_DEBUG -DBN_DEBUG -DBN_DEBUG_RAND -DCRYPTO_MDEBUG -DENGINE_CONF_DEBUG -DOPENSSL_NO_ASM -DL_ENDIAN -DTERMIO -D_POSIX_SOURCE -DPEDANTIC -ggdb -g3 -mcpu=i486 -pedantic -ansi -Wall -Wshadow -Wcast-align -Wstrict-prototypes -Wmissing-prototypes -Wno-long-long -Wundef -Wconversion -pipe::-D_REENTRANT::-ldl:BN_LLONG ${x86_gcc_des} ${x86_gcc_opts}:${no_asm}:dlfcn:linux-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
 "debug-levitte-linux-elf-extreme","gcc:-DLEVITTE_DEBUG -DREF_CHECK -DCONF_DEBUG -DBN_DEBUG -DBN_DEBUG_RAND -DCRYPTO_MDEBUG -DENGINE_CONF_DEBUG -DL_ENDIAN -DTERMIO -D_POSIX_SOURCE -DPEDANTIC -ggdb -g3 -mcpu=i486 -pedantic -ansi -Wall -W -Wundef -Wshadow -Wcast-align -Wstrict-prototypes -Wmissing-prototypes -Wno-long-long -Wundef -Wconversion -pipe::-D_REENTRANT::-ldl:BN_LLONG ${x86_gcc_des} ${x86_gcc_opts}:${x86_elf_asm}:dlfcn:linux-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
 "debug-levitte-linux-noasm-extreme","gcc:-DLEVITTE_DEBUG -DREF_CHECK -DCONF_DEBUG -DBN_DEBUG -DBN_DEBUG_RAND -DCRYPTO_MDEBUG -DENGINE_CONF_DEBUG -DOPENSSL_NO_ASM -DL_ENDIAN -DTERMIO -D_POSIX_SOURCE -DPEDANTIC -ggdb -g3 -mcpu=i486 -pedantic -ansi -Wall -W -Wundef -Wshadow -Wcast-align -Wstrict-prototypes -Wmissing-prototypes -Wno-long-long -Wundef -Wconversion -pipe::-D_REENTRANT::-ldl:BN_LLONG ${x86_gcc_des} ${x86_gcc_opts}:${no_asm}:dlfcn:linux-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
-"debug-geoff32","gcc:-DBN_DEBUG -DBN_DEBUG_RAND -DBN_STRICT -DPURIFY -DOPENSSL_NO_DEPRECATED -DOPENSSL_NO_ASM -DOPENSSL_NO_INLINE_ASM -DL_ENDIAN -DTERMIO -DPEDANTIC -DMD32_REG_T=int -O1 -ggdb2 -Wall -Werror -Wundef -pedantic -Wshadow -Wpointer-arith -Wbad-function-cast -Wcast-align -Wsign-compare -Wmissing-prototypes -Wmissing-declarations -Wno-long-long::-D_REENTRANT::-ldl:BN_LLONG:${no_asm}:dlfcn:linux-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
-"debug-geoff64","gcc:-DBN_DEBUG -DBN_DEBUG_RAND -DBN_STRICT -DPURIFY -DOPENSSL_NO_DEPRECATED -DOPENSSL_NO_ASM -DOPENSSL_NO_INLINE_ASM -DL_ENDIAN -DTERMIO -DPEDANTIC -DMD32_REG_T=int -O1 -ggdb2 -Wall -Werror -Wundef -pedantic -Wshadow -Wpointer-arith -Wbad-function-cast -Wcast-align -Wsign-compare -Wmissing-prototypes -Wmissing-declarations -Wno-long-long::-D_REENTRANT::-ldl:SIXTY_FOUR_BIT_LONG RC4_CHAR RC4_CHUNK DES_INT DES_UNROLL BF_PTR:${no_asm}:dlfcn:linux-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
+"debug-geoff32","gcc:-DBN_DEBUG -DBN_DEBUG_RAND -DBN_STRICT -DPURIFY -DOPENSSL_NO_DEPRECATED -DOPENSSL_NO_ASM -DOPENSSL_NO_INLINE_ASM -DL_ENDIAN -DTERMIO -DPEDANTIC -O1 -ggdb2 -Wall -Werror -Wundef -pedantic -Wshadow -Wpointer-arith -Wbad-function-cast -Wcast-align -Wsign-compare -Wmissing-prototypes -Wmissing-declarations -Wno-long-long::-D_REENTRANT::-ldl:BN_LLONG:${no_asm}:dlfcn:linux-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
+"debug-geoff64","gcc:-DBN_DEBUG -DBN_DEBUG_RAND -DBN_STRICT -DPURIFY -DOPENSSL_NO_DEPRECATED -DOPENSSL_NO_ASM -DOPENSSL_NO_INLINE_ASM -DL_ENDIAN -DTERMIO -DPEDANTIC -O1 -ggdb2 -Wall -Werror -Wundef -pedantic -Wshadow -Wpointer-arith -Wbad-function-cast -Wcast-align -Wsign-compare -Wmissing-prototypes -Wmissing-declarations -Wno-long-long::-D_REENTRANT::-ldl:SIXTY_FOUR_BIT_LONG RC4_CHAR RC4_CHUNK DES_INT DES_UNROLL BF_PTR:${no_asm}:dlfcn:linux-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
 "debug-linux-pentium","gcc:-DBN_DEBUG -DREF_CHECK -DCONF_DEBUG -DBN_CTX_DEBUG -DCRYPTO_MDEBUG -DL_ENDIAN -DTERMIO -g -mcpu=pentium -Wall::-D_REENTRANT::-ldl:BN_LLONG ${x86_gcc_des} ${x86_gcc_opts}:${x86_elf_asm}:dlfcn",
 "debug-linux-ppro","gcc:-DBN_DEBUG -DREF_CHECK -DCONF_DEBUG -DBN_CTX_DEBUG -DCRYPTO_MDEBUG -DL_ENDIAN -DTERMIO -g -mcpu=pentiumpro -Wall::-D_REENTRANT::-ldl:BN_LLONG ${x86_gcc_des} ${x86_gcc_opts}:${x86_elf_asm}:dlfcn",
 "debug-linux-elf","gcc:-DBN_DEBUG -DREF_CHECK -DCONF_DEBUG -DBN_CTX_DEBUG -DCRYPTO_MDEBUG -DL_ENDIAN -DTERMIO -g -march=i486 -Wall::-D_REENTRANT::-lefence -ldl:BN_LLONG ${x86_gcc_des} ${x86_gcc_opts}:${x86_elf_asm}:dlfcn:linux-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
 "debug-linux-elf-noefence","gcc:-DBN_DEBUG -DREF_CHECK -DCONF_DEBUG -DBN_CTX_DEBUG -DCRYPTO_MDEBUG -DL_ENDIAN -DTERMIO -g -march=i486 -Wall::-D_REENTRANT::-ldl:BN_LLONG ${x86_gcc_des} ${x86_gcc_opts}:${x86_elf_asm}:dlfcn:linux-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
-"debug-linux-ia32-aes", "gcc:-DAES_EXPERIMENTAL -DL_ENDIAN -DTERMIO -O3 -fomit-frame-pointer -Wall::-D_REENTRANT::-ldl:BN_LLONG ${x86_gcc_des} ${x86_gcc_opts}:x86cpuid.o:bn-586.o co-586.o x86-mont.o:des-586.o crypt586.o:aes_x86core.o aes_cbc.o:bf-586.o:md5-586.o:sha1-586.o sha256-586.o sha512-586.o:cast-586.o:rc4-586.o:rmd-586.o:rc5-586.o:wp_block.o wp-mmx.o::elf:dlfcn:linux-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
+"debug-linux-ia32-aes", "gcc:-DAES_EXPERIMENTAL -DL_ENDIAN -DTERMIO -O3 -fomit-frame-pointer -Wall::-D_REENTRANT::-ldl:BN_LLONG ${x86_gcc_des} ${x86_gcc_opts}:x86cpuid.o:bn-586.o co-586.o x86-mont.o:des-586.o crypt586.o:aes_x86core.o aes_cbc.o aesni-x86.o:bf-586.o:md5-586.o:sha1-586.o sha256-586.o sha512-586.o:cast-586.o:rc4-586.o:rmd-586.o:rc5-586.o:wp_block.o wp-mmx.o::ghash-x86.o::elf:dlfcn:linux-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
+"debug-linux-generic32","gcc:-DBN_DEBUG -DREF_CHECK -DCONF_DEBUG -DCRYPTO_MDEBUG -DTERMIO -g -Wall::-D_REENTRANT::-ldl:BN_LLONG RC4_CHAR RC4_CHUNK DES_INT DES_UNROLL BF_PTR:${no_asm}:dlfcn:linux-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
+"debug-linux-generic64","gcc:-DBN_DEBUG -DREF_CHECK -DCONF_DEBUG -DCRYPTO_MDEBUG -DTERMIO -g -Wall::-D_REENTRANT::-ldl:SIXTY_FOUR_BIT_LONG RC4_CHAR RC4_CHUNK DES_INT DES_UNROLL BF_PTR:${no_asm}:dlfcn:linux-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
+"debug-linux-x86_64","gcc:-DBN_DEBUG -DREF_CHECK -DCONF_DEBUG -DCRYPTO_MDEBUG -m64 -DL_ENDIAN -DTERMIO -g -Wall::-D_REENTRANT::-ldl:SIXTY_FOUR_BIT_LONG RC4_CHUNK DES_INT DES_UNROLL:${x86_64_asm}:elf:dlfcn:linux-shared:-fPIC:-m64:.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR):::64",
 "dist",		"cc:-O::(unknown)::::::",
 
 # Basic configs that should work on any (32 and less bit) box
@@ -191,8 +202,8 @@ my %table=(
 "cc",		"cc:-O::(unknown)::::::",
 
 ####VOS Configurations
-"vos-gcc","gcc:-O3 -Wall -D_POSIX_C_SOURCE=200112L -D_BSD -DB_ENDIAN::(unknown):VOS:-Wl,-map:BN_LLONG:${no_asm}:::::.so:",
-"debug-vos-gcc","gcc:-O0 -g -Wall -D_POSIX_C_SOURCE=200112L -D_BSD -DB_ENDIAN -DBN_DEBUG -DREF_CHECK -DCONF_DEBUG -DCRYPTO_MDEBUG::(unknown):VOS:-Wl,-map:BN_LLONG:${no_asm}:::::.so:",
+"vos-gcc","gcc:-O3 -Wall -DOPENSSL_SYSNAME_VOS -D_POSIX_C_SOURCE=200112L -D_BSD -D_VOS_EXTENDED_NAMES -DB_ENDIAN::(unknown):VOS:-Wl,-map:BN_LLONG:${no_asm}:::::.so:",
+"debug-vos-gcc","gcc:-O0 -g -Wall -DOPENSSL_SYSNAME_VOS -D_POSIX_C_SOURCE=200112L -D_BSD -D_VOS_EXTENDED_NAMES -DB_ENDIAN -DBN_DEBUG -DREF_CHECK -DCONF_DEBUG -DCRYPTO_MDEBUG::(unknown):VOS:-Wl,-map:BN_LLONG:${no_asm}:::::.so:",
 
 #### Solaris x86 with GNU C setups
 # -DOPENSSL_NO_INLINE_ASM switches off inline assembler. We have to do it
@@ -209,11 +220,11 @@ my %table=(
 # actually recommend to consider using gcc shared build even with vendor
 # compiler:-)
 #						<appro@fy.chalmers.se>
-"solaris64-x86_64-gcc","gcc:-m64 -O3 -Wall -DL_ENDIAN -DMD32_REG_T=int::-D_REENTRANT::-lsocket -lnsl -ldl:SIXTY_FOUR_BIT_LONG RC4_CHUNK BF_PTR2 DES_INT DES_UNROLL:${x86_64_asm}:elf:dlfcn:solaris-shared:-fPIC:-m64 -shared -static-libgcc:.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR):::/64",
+"solaris64-x86_64-gcc","gcc:-m64 -O3 -Wall -DL_ENDIAN::-D_REENTRANT::-lsocket -lnsl -ldl:SIXTY_FOUR_BIT_LONG RC4_CHUNK DES_INT DES_UNROLL:${x86_64_asm}:elf:dlfcn:solaris-shared:-fPIC:-m64 -shared -static-libgcc:.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR):::/64",
  
 #### Solaris x86 with Sun C setups
 "solaris-x86-cc","cc:-fast -O -Xa::-D_REENTRANT::-lsocket -lnsl -ldl:BN_LLONG RC4_CHAR RC4_CHUNK DES_PTR DES_UNROLL BF_PTR:${no_asm}:dlfcn:solaris-shared:-KPIC:-G -dy -z text:.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
-"solaris64-x86_64-cc","cc:-fast -xarch=amd64 -xstrconst -Xa -DL_ENDIAN::-D_REENTRANT::-lsocket -lnsl -ldl:SIXTY_FOUR_BIT_LONG RC4_CHUNK BF_PTR2 DES_INT DES_UNROLL:${x86_64_asm}:elf:dlfcn:solaris-shared:-KPIC:-xarch=amd64 -G -dy -z text:.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR):::/64",
+"solaris64-x86_64-cc","cc:-fast -xarch=amd64 -xstrconst -Xa -DL_ENDIAN::-D_REENTRANT::-lsocket -lnsl -ldl:SIXTY_FOUR_BIT_LONG RC4_CHUNK DES_INT DES_UNROLL:${x86_64_asm}:elf:dlfcn:solaris-shared:-KPIC:-xarch=amd64 -G -dy -z text:.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR):::/64",
 
 #### SPARC Solaris with GNU C setups
 "solaris-sparcv7-gcc","gcc:-O3 -fomit-frame-pointer -Wall -DB_ENDIAN -DBN_DIV2W::-D_REENTRANT::-lsocket -lnsl -ldl:BN_LLONG RC4_CHAR RC4_CHUNK DES_UNROLL BF_PTR:${no_asm}:dlfcn:solaris-shared:-fPIC:-shared:.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
@@ -243,16 +254,16 @@ my %table=(
 
 #### IRIX 5.x configs
 # -mips2 flag is added by ./config when appropriate.
-"irix-gcc","gcc:-O3 -DTERMIOS -DB_ENDIAN::(unknown):::BN_LLONG MD2_CHAR RC4_INDEX RC4_CHAR RC4_CHUNK DES_UNROLL DES_RISC2 DES_PTR BF_PTR:${no_asm}:dlfcn:irix-shared:::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
-"irix-cc", "cc:-O2 -use_readonly_const -DTERMIOS -DB_ENDIAN::(unknown):::BN_LLONG RC4_CHAR RC4_CHUNK DES_PTR DES_RISC2 DES_UNROLL BF_PTR:${no_asm}:dlfcn:irix-shared:::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
+"irix-gcc","gcc:-O3 -DTERMIOS -DB_ENDIAN::(unknown):::BN_LLONG MD2_CHAR RC4_INDEX RC4_CHAR RC4_CHUNK DES_UNROLL DES_RISC2 DES_PTR BF_PTR:${mips32_asm}:o32:dlfcn:irix-shared:::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
+"irix-cc", "cc:-O2 -use_readonly_const -DTERMIOS -DB_ENDIAN::(unknown):::BN_LLONG RC4_CHAR RC4_CHUNK DES_PTR DES_RISC2 DES_UNROLL BF_PTR:${mips32_asm}:o32:dlfcn:irix-shared:::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
 #### IRIX 6.x configs
 # Only N32 and N64 ABIs are supported. If you need O32 ABI build, invoke
 # './Configure irix-cc -o32' manually.
-"irix-mips3-gcc","gcc:-mabi=n32 -O3 -DTERMIOS -DB_ENDIAN -DBN_DIV3W::-D_SGI_MP_SOURCE:::MD2_CHAR RC4_INDEX RC4_CHAR RC4_CHUNK_LL DES_UNROLL DES_RISC2 DES_PTR BF_PTR SIXTY_FOUR_BIT:${mips3_asm}:dlfcn:irix-shared::-mabi=n32:.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR):::32",
-"irix-mips3-cc", "cc:-n32 -mips3 -O2 -use_readonly_const -G0 -rdata_shared -DTERMIOS -DB_ENDIAN -DBN_DIV3W::-D_SGI_MP_SOURCE:::DES_PTR RC4_CHAR RC4_CHUNK_LL DES_RISC2 DES_UNROLL BF_PTR SIXTY_FOUR_BIT:${mips3_asm}:dlfcn:irix-shared::-n32:.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR):::32",
+"irix-mips3-gcc","gcc:-mabi=n32 -O3 -DTERMIOS -DB_ENDIAN -DBN_DIV3W::-D_SGI_MP_SOURCE:::MD2_CHAR RC4_INDEX RC4_CHAR RC4_CHUNK_LL DES_UNROLL DES_RISC2 DES_PTR BF_PTR SIXTY_FOUR_BIT:${mips64_asm}:n32:dlfcn:irix-shared::-mabi=n32:.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR):::32",
+"irix-mips3-cc", "cc:-n32 -mips3 -O2 -use_readonly_const -G0 -rdata_shared -DTERMIOS -DB_ENDIAN -DBN_DIV3W::-D_SGI_MP_SOURCE:::DES_PTR RC4_CHAR RC4_CHUNK_LL DES_RISC2 DES_UNROLL BF_PTR SIXTY_FOUR_BIT:${mips64_asm}:n32:dlfcn:irix-shared::-n32:.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR):::32",
 # N64 ABI builds.
-"irix64-mips4-gcc","gcc:-mabi=64 -mips4 -O3 -DTERMIOS -DB_ENDIAN -DBN_DIV3W::-D_SGI_MP_SOURCE:::RC4_CHAR RC4_CHUNK DES_RISC2 DES_UNROLL SIXTY_FOUR_BIT_LONG:${mips3_asm}:dlfcn:irix-shared::-mabi=64:.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR):::64",
-"irix64-mips4-cc", "cc:-64 -mips4 -O2 -use_readonly_const -G0 -rdata_shared -DTERMIOS -DB_ENDIAN -DBN_DIV3W::-D_SGI_MP_SOURCE:::RC4_CHAR RC4_CHUNK DES_RISC2 DES_UNROLL SIXTY_FOUR_BIT_LONG:${mips3_asm}:dlfcn:irix-shared::-64:.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR):::64",
+"irix64-mips4-gcc","gcc:-mabi=64 -mips4 -O3 -DTERMIOS -DB_ENDIAN -DBN_DIV3W::-D_SGI_MP_SOURCE:::RC4_CHAR RC4_CHUNK DES_RISC2 DES_UNROLL SIXTY_FOUR_BIT_LONG:${mips64_asm}:64:dlfcn:irix-shared::-mabi=64:.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR):::64",
+"irix64-mips4-cc", "cc:-64 -mips4 -O2 -use_readonly_const -G0 -rdata_shared -DTERMIOS -DB_ENDIAN -DBN_DIV3W::-D_SGI_MP_SOURCE:::RC4_CHAR RC4_CHUNK DES_RISC2 DES_UNROLL SIXTY_FOUR_BIT_LONG:${mips64_asm}:64:dlfcn:irix-shared::-64:.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR):::64",
 
 #### Unified HP-UX ANSI C configs.
 # Special notes:
@@ -285,17 +296,18 @@ my %table=(
 # Since there is mention of this in shlib/hpux10-cc.sh
 "hpux-parisc-cc-o4","cc:-Ae +O4 +ESlit -z -DB_ENDIAN -DBN_DIV2W -DMD32_XARRAY::-D_REENTRANT::-ldld:BN_LLONG DES_PTR DES_UNROLL DES_RISC1:${no_asm}:dl:hpux-shared:+Z:-b:.sl.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
 "hpux-parisc-gcc","gcc:-O3 -DB_ENDIAN -DBN_DIV2W::-D_REENTRANT::-Wl,+s -ldld:BN_LLONG DES_PTR DES_UNROLL DES_RISC1:${no_asm}:dl:hpux-shared:-fPIC:-shared:.sl.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
-"hpux-parisc2-gcc","gcc:-march=2.0 -O3 -DB_ENDIAN -D_REENTRANT::::-Wl,+s -ldld:SIXTY_FOUR_BIT RC4_CHAR RC4_CHUNK DES_PTR DES_UNROLL DES_RISC1::pa-risc2.o::::::::::::void:dl:hpux-shared:-fPIC:-shared:.sl.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
-"hpux64-parisc2-gcc","gcc:-O3 -DB_ENDIAN -D_REENTRANT::::-ldl:SIXTY_FOUR_BIT_LONG MD2_CHAR RC4_INDEX RC4_CHAR DES_UNROLL DES_RISC1 DES_INT::pa-risc2W.o::::::::::::void:dlfcn:hpux-shared:-fpic:-shared:.sl.\$(SHLIB_MAJOR).\$(SHLIB_MINOR):::/pa20_64",
+"hpux-parisc1_1-gcc","gcc:-O3 -DB_ENDIAN -DBN_DIV2W::-D_REENTRANT::-Wl,+s -ldld:BN_LLONG DES_PTR DES_UNROLL DES_RISC1:${parisc11_asm}:dl:hpux-shared:-fPIC:-shared:.sl.\$(SHLIB_MAJOR).\$(SHLIB_MINOR):::/pa1.1",
+"hpux-parisc2-gcc","gcc:-march=2.0 -O3 -DB_ENDIAN -D_REENTRANT::::-Wl,+s -ldld:SIXTY_FOUR_BIT RC4_CHAR RC4_CHUNK DES_PTR DES_UNROLL DES_RISC1:".eval{my $asm=$parisc20_asm;$asm=~s/2W\./2\./;$asm=~s/:64/:32/;$asm}.":dl:hpux-shared:-fPIC:-shared:.sl.\$(SHLIB_MAJOR).\$(SHLIB_MINOR):::/pa20_32",
+"hpux64-parisc2-gcc","gcc:-O3 -DB_ENDIAN -D_REENTRANT::::-ldl:SIXTY_FOUR_BIT_LONG MD2_CHAR RC4_INDEX RC4_CHAR DES_UNROLL DES_RISC1 DES_INT::pa-risc2W.o::::::::::::::void:dlfcn:hpux-shared:-fpic:-shared:.sl.\$(SHLIB_MAJOR).\$(SHLIB_MINOR):::/pa20_64",
 
 # More attempts at unified 10.X and 11.X targets for HP C compiler.
 #
 # Chris Ruemmler <ruemmler@cup.hp.com>
 # Kevin Steves <ks@hp.se>
 "hpux-parisc-cc","cc:+O3 +Optrs_strongly_typed -Ae +ESlit -DB_ENDIAN -DBN_DIV2W -DMD32_XARRAY::-D_REENTRANT::-Wl,+s -ldld:MD2_CHAR RC4_INDEX RC4_CHAR DES_UNROLL DES_RISC1 DES_INT:${no_asm}:dl:hpux-shared:+Z:-b:.sl.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
-"hpux-parisc1_0-cc","cc:+DAportable +O3 +Optrs_strongly_typed -Ae +ESlit -DB_ENDIAN -DMD32_XARRAY::-D_REENTRANT::-Wl,+s -ldld:MD2_CHAR RC4_INDEX RC4_CHAR DES_UNROLL DES_RISC1 DES_INT:${no_asm}:dl:hpux-shared:+Z:-b:.sl.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
-"hpux-parisc2-cc","cc:+DA2.0 +DS2.0 +O3 +Optrs_strongly_typed -Ae +ESlit -DB_ENDIAN -DMD32_XARRAY -D_REENTRANT::::-Wl,+s -ldld:SIXTY_FOUR_BIT MD2_CHAR RC4_INDEX RC4_CHAR DES_UNROLL DES_RISC1 DES_INT::pa-risc2.o::::::::::::void:dl:hpux-shared:+Z:-b:.sl.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
-"hpux64-parisc2-cc","cc:+DD64 +O3 +Optrs_strongly_typed -Ae +ESlit -DB_ENDIAN -DMD32_XARRAY -D_REENTRANT::::-ldl:SIXTY_FOUR_BIT_LONG MD2_CHAR RC4_INDEX RC4_CHAR DES_UNROLL DES_RISC1 DES_INT::pa-risc2W.o::::::::::::void:dlfcn:hpux-shared:+Z:+DD64 -b:.sl.\$(SHLIB_MAJOR).\$(SHLIB_MINOR):::/pa20_64",
+"hpux-parisc1_1-cc","cc:+DA1.1 +O3 +Optrs_strongly_typed -Ae +ESlit -DB_ENDIAN -DMD32_XARRAY::-D_REENTRANT::-Wl,+s -ldld:MD2_CHAR RC4_INDEX RC4_CHAR DES_UNROLL DES_RISC1 DES_INT:${parisc11_asm}:dl:hpux-shared:+Z:-b:.sl.\$(SHLIB_MAJOR).\$(SHLIB_MINOR):::/pa1.1",
+"hpux-parisc2-cc","cc:+DA2.0 +DS2.0 +O3 +Optrs_strongly_typed -Ae +ESlit -DB_ENDIAN -DMD32_XARRAY -D_REENTRANT::::-Wl,+s -ldld:SIXTY_FOUR_BIT MD2_CHAR RC4_INDEX RC4_CHAR DES_UNROLL DES_RISC1 DES_INT:".eval{my $asm=$parisc20_asm;$asm=~s/2W\./2\./;$asm=~s/:64/:32/;$asm}.":dl:hpux-shared:+Z:-b:.sl.\$(SHLIB_MAJOR).\$(SHLIB_MINOR):::/pa20_32",
+"hpux64-parisc2-cc","cc:+DD64 +O3 +Optrs_strongly_typed -Ae +ESlit -DB_ENDIAN -DMD32_XARRAY -D_REENTRANT::::-ldl:SIXTY_FOUR_BIT_LONG MD2_CHAR RC4_INDEX RC4_CHAR DES_UNROLL DES_RISC1 DES_INT:${parisc20_asm}:dlfcn:hpux-shared:+Z:+DD64 -b:.sl.\$(SHLIB_MAJOR).\$(SHLIB_MINOR):::/pa20_64",
 
 # HP/UX IA-64 targets
 "hpux-ia64-cc","cc:-Ae +DD32 +O2 +Olit=all -z -DB_ENDIAN -D_REENTRANT::::-ldl:SIXTY_FOUR_BIT MD2_CHAR RC4_INDEX DES_UNROLL DES_RISC1 DES_INT:${ia64_asm}:dlfcn:hpux-shared:+Z:+DD32 -b:.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR):::/hpux32",
@@ -346,8 +358,22 @@ my %table=(
 "linux-ia64",	"gcc:-DL_ENDIAN -DTERMIO -O3 -Wall::-D_REENTRANT::-ldl:SIXTY_FOUR_BIT_LONG RC4_CHUNK DES_UNROLL DES_INT:${ia64_asm}:dlfcn:linux-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
 "linux-ia64-ecc","ecc:-DL_ENDIAN -DTERMIO -O2 -Wall -no_cpprt::-D_REENTRANT::-ldl:SIXTY_FOUR_BIT_LONG RC4_CHUNK DES_INT:${ia64_asm}:dlfcn:linux-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
 "linux-ia64-icc","icc:-DL_ENDIAN -DTERMIO -O2 -Wall -no_cpprt::-D_REENTRANT::-ldl:SIXTY_FOUR_BIT_LONG RC4_CHUNK DES_RISC1 DES_INT:${ia64_asm}:dlfcn:linux-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
-"linux-x86_64",	"gcc:-m64 -DL_ENDIAN -DTERMIO -O3 -Wall -DMD32_REG_T=int::-D_REENTRANT::-ldl:SIXTY_FOUR_BIT_LONG RC4_CHUNK BF_PTR2 DES_INT DES_UNROLL:${x86_64_asm}:elf:dlfcn:linux-shared:-fPIC:-m64:.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR):::64",
-"linux-s390x",	"gcc:-m64 -DB_ENDIAN -DTERMIO -O3 -Wall::-D_REENTRANT::-ldl:SIXTY_FOUR_BIT_LONG RC4_CHAR RC4_CHUNK DES_INT DES_UNROLL:${s390x_asm}:dlfcn:linux-shared:-fPIC:-m64:.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR):::64",
+"linux-x86_64",	"gcc:-m64 -DL_ENDIAN -DTERMIO -O3 -Wall::-D_REENTRANT::-ldl:SIXTY_FOUR_BIT_LONG RC4_CHUNK DES_INT DES_UNROLL:${x86_64_asm}:elf:dlfcn:linux-shared:-fPIC:-m64:.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR):::64",
+"linux64-s390x",	"gcc:-m64 -DB_ENDIAN -DTERMIO -O3 -Wall::-D_REENTRANT::-ldl:SIXTY_FOUR_BIT_LONG RC4_CHAR RC4_CHUNK DES_INT DES_UNROLL:${s390x_asm}:64:dlfcn:linux-shared:-fPIC:-m64:.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR):::64",
+#### So called "highgprs" target for z/Architecture CPUs
+# "Highgprs" is kernel feature first implemented in Linux 2.6.32, see
+# /proc/cpuinfo. The idea is to preserve most significant bits of
+# general purpose registers not only upon 32-bit process context
+# switch, but even on asynchronous signal delivery to such process.
+# This makes it possible to deploy 64-bit instructions even in legacy
+# application context and achieve better [or should we say adequate]
+# performance. The build is binary compatible with linux-generic32,
+# and the idea is to be able to install the resulting libcrypto.so
+# alongside generic one, e.g. as /lib/highgprs/libcrypto.so.x.y, for
+# ldconfig and run-time linker to autodiscover. Unfortunately it
+# doesn't work just yet, because of couple of bugs in glibc
+# sysdeps/s390/dl-procinfo.c affecting ldconfig and ld.so.1...
+"linux32-s390x",	"gcc:-m31 -Wa,-mzarch -DB_ENDIAN -DTERMIO -O3 -Wall::-D_REENTRANT::-ldl:BN_LLONG RC4_CHAR RC4_CHUNK DES_INT DES_UNROLL:".eval{my $asm=$s390x_asm;$asm=~s/bn\-s390x\.o/bn_asm.o/;$asm}.":31:dlfcn:linux-shared:-fPIC:-m31:.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR):::/highgprs",
 #### SPARC Linux setups
 # Ray Miller <ray.miller@computing-services.oxford.ac.uk> has patiently
 # assisted with debugging of following two configs.
@@ -375,6 +401,11 @@ my %table=(
 "linux-alpha-ccc","ccc:-fast -readonly_strings -DL_ENDIAN -DTERMIO::-D_REENTRANT:::SIXTY_FOUR_BIT_LONG RC4_CHUNK DES_INT DES_PTR DES_RISC1 DES_UNROLL:${alpha_asm}",
 "linux-alpha+bwx-ccc","ccc:-fast -readonly_strings -DL_ENDIAN -DTERMIO::-D_REENTRANT:::SIXTY_FOUR_BIT_LONG RC4_CHAR RC4_CHUNK DES_INT DES_PTR DES_RISC1 DES_UNROLL:${alpha_asm}",
 
+# Android: linux-* but without -DTERMIO and pointers to headers and libs.
+"android","gcc:-mandroid -I\$(ANDROID_DEV)/include -B\$(ANDROID_DEV)/lib -O3 -fomit-frame-pointer -Wall::-D_REENTRANT::-ldl:BN_LLONG RC4_CHAR RC4_CHUNK DES_INT DES_UNROLL BF_PTR:${no_asm}:dlfcn:linux-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
+"android-x86","gcc:-mandroid -I\$(ANDROID_DEV)/include -B\$(ANDROID_DEV)/lib -O3 -fomit-frame-pointer -Wall::-D_REENTRANT::-ldl:BN_LLONG ${x86_gcc_des} ${x86_gcc_opts}:".eval{my $asm=${x86_elf_asm};$asm=~s/:elf/:android/;$asm}.":dlfcn:linux-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
+"android-armv7","gcc:-march=armv7-a -mandroid -I\$(ANDROID_DEV)/include -B\$(ANDROID_DEV)/lib -O3 -fomit-frame-pointer -Wall::-D_REENTRANT::-ldl:BN_LLONG RC4_CHAR RC4_CHUNK DES_INT DES_UNROLL BF_PTR:${armv4_asm}:dlfcn:linux-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
+
 #### *BSD [do see comment about ${BSDthreads} above!]
 "BSD-generic32","gcc:-DTERMIOS -O3 -fomit-frame-pointer -Wall::${BSDthreads}:::BN_LLONG RC2_CHAR RC4_INDEX DES_INT DES_UNROLL:${no_asm}:dlfcn:bsd-gcc-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
 "BSD-x86",	"gcc:-DL_ENDIAN -DTERMIOS -O3 -fomit-frame-pointer -Wall::${BSDthreads}:::BN_LLONG ${x86_gcc_des} ${x86_gcc_opts}:${x86_asm}:a.out:dlfcn:bsd-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
@@ -388,7 +419,7 @@ my %table=(
 # triggered by RIPEMD160 code.
 "BSD-sparc64",	"gcc:-DB_ENDIAN -DTERMIOS -O3 -DMD32_REG_T=int -Wall::${BSDthreads}:::BN_LLONG RC2_CHAR RC4_CHUNK DES_INT DES_PTR DES_RISC2 BF_PTR:${sparcv9_asm}:dlfcn:bsd-gcc-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
 "BSD-ia64",	"gcc:-DL_ENDIAN -DTERMIOS -O3 -Wall::${BSDthreads}:::SIXTY_FOUR_BIT_LONG RC4_CHUNK DES_UNROLL DES_INT:${ia64_asm}:dlfcn:bsd-gcc-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
-"BSD-x86_64",	"gcc:-DL_ENDIAN -DTERMIOS -O3 -DMD32_REG_T=int -Wall::${BSDthreads}:::SIXTY_FOUR_BIT_LONG RC4_CHUNK DES_INT DES_UNROLL:${x86_64_asm}:elf:dlfcn:bsd-gcc-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
+"BSD-x86_64",	"gcc:-DL_ENDIAN -DTERMIOS -O3 -Wall::${BSDthreads}:::SIXTY_FOUR_BIT_LONG RC4_CHUNK DES_INT DES_UNROLL:${x86_64_asm}:elf:dlfcn:bsd-gcc-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
 
 "bsdi-elf-gcc",     "gcc:-DPERL5 -DL_ENDIAN -fomit-frame-pointer -O3 -march=i486 -Wall::(unknown)::-ldl:BN_LLONG ${x86_gcc_des} ${x86_gcc_opts}:${x86_elf_asm}:dlfcn:bsd-gcc-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
 
@@ -400,7 +431,8 @@ my %table=(
 
 # QNX
 "qnx4",	"cc:-DL_ENDIAN -DTERMIO::(unknown):::${x86_gcc_des} ${x86_gcc_opts}:",
-"qnx6",	"cc:-DL_ENDIAN -DTERMIOS::(unknown)::-lsocket:${x86_gcc_des} ${x86_gcc_opts}:",
+"QNX6",       "gcc:-DTERMIOS::::-lsocket::${no_asm}:dlfcn:bsd-gcc-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
+"QNX6-i386",  "gcc:-DL_ENDIAN -DTERMIOS -O2 -Wall::::-lsocket:${x86_gcc_des} ${x86_gcc_opts}:${x86_elf_asm}:dlfcn:bsd-gcc-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
 
 # BeOS
 "beos-x86-r5",   "gcc:-DL_ENDIAN -DTERMIOS -O3 -fomit-frame-pointer -mcpu=pentium -Wall::-D_REENTRANT:BEOS:-lbe -lnet:BN_LLONG ${x86_gcc_des} ${x86_gcc_opts}:${x86_elf_asm}:beos:beos-shared:-fPIC -DPIC:-shared:.so",
@@ -484,19 +516,22 @@ my %table=(
 # Visual C targets
 #
 # Win64 targets, WIN64I denotes IA-64 and WIN64A - AMD64
-"VC-WIN64I","cl:-W3 -Gs0 -Gy -nologo -DOPENSSL_SYSNAME_WIN32 -DWIN32_LEAN_AND_MEAN -DL_ENDIAN -DUNICODE -D_UNICODE -D_CRT_SECURE_NO_DEPRECATE:::WIN64I::SIXTY_FOUR_BIT RC4_CHUNK_LL DES_INT EXPORT_VAR_AS_FN:ia64cpuid.o:ia64.o::aes_core.o aes_cbc.o aes-ia64.o::md5-ia64.o:sha1-ia64.o sha256-ia64.o sha512-ia64.o:::::::ias:win32",
-"VC-WIN64A","cl:-W3 -Gs0 -Gy -nologo -DOPENSSL_SYSNAME_WIN32 -DWIN32_LEAN_AND_MEAN -DL_ENDIAN -DUNICODE -D_UNICODE -D_CRT_SECURE_NO_DEPRECATE:::WIN64A::SIXTY_FOUR_BIT RC4_CHUNK_LL DES_INT EXPORT_VAR_AS_FN:x86_64cpuid.o:bn_asm.o x86_64-mont.o::aes-x86_64.o::md5-x86_64.o:sha1-x86_64.o sha256-x86_64.o sha512-x86_64.o::rc4-x86_64.o:::wp-x86_64.o::ml64:win32",
+"VC-WIN64I","cl:-W3 -Gs0 -Gy -nologo -DOPENSSL_SYSNAME_WIN32 -DWIN32_LEAN_AND_MEAN -DL_ENDIAN -DUNICODE -D_UNICODE -D_CRT_SECURE_NO_DEPRECATE:::WIN64I::SIXTY_FOUR_BIT RC4_CHUNK_LL DES_INT EXPORT_VAR_AS_FN:ia64cpuid.o:ia64.o ia64-mont.o::aes_core.o aes_cbc.o aes-ia64.o::md5-ia64.o:sha1-ia64.o sha256-ia64.o sha512-ia64.o:::::::ghash-ia64.o::ias:win32",
+"VC-WIN64A","cl:-W3 -Gs0 -Gy -nologo -DOPENSSL_SYSNAME_WIN32 -DWIN32_LEAN_AND_MEAN -DL_ENDIAN -DUNICODE -D_UNICODE -D_CRT_SECURE_NO_DEPRECATE:::WIN64A::SIXTY_FOUR_BIT RC4_CHUNK_LL DES_INT EXPORT_VAR_AS_FN:".eval{my $asm=$x86_64_asm;$asm=~s/x86_64-gcc\.o/bn_asm.o/;$asm}.":auto:win32",
+"debug-VC-WIN64I","cl:-W3 -Gs0 -Gy -Zi -nologo -DOPENSSL_SYSNAME_WIN32 -DWIN32_LEAN_AND_MEAN -DL_ENDIAN -DUNICODE -D_UNICODE -D_CRT_SECURE_NO_DEPRECATE:::WIN64I::SIXTY_FOUR_BIT RC4_CHUNK_LL DES_INT EXPORT_VAR_AS_FN:ia64cpuid.o:ia64.o::aes_core.o aes_cbc.o aes-ia64.o::md5-ia64.o:sha1-ia64.o sha256-ia64.o sha512-ia64.o:::::::ghash-ia64.o::ias:win32",
+"debug-VC-WIN64A","cl:-W3 -Gs0 -Gy -Zi -nologo -DOPENSSL_SYSNAME_WIN32 -DWIN32_LEAN_AND_MEAN -DL_ENDIAN -DUNICODE -D_UNICODE -D_CRT_SECURE_NO_DEPRECATE:::WIN64A::SIXTY_FOUR_BIT RC4_CHUNK_LL DES_INT EXPORT_VAR_AS_FN:".eval{my $asm=$x86_64_asm;$asm=~s/x86_64-gcc\.o/bn_asm.o/;$asm}.":auto:win32",
 # x86 Win32 target defaults to ANSI API, if you want UNICODE, complement
 # 'perl Configure VC-WIN32' with '-DUNICODE -D_UNICODE'
-"VC-WIN32","cl:-W3 -WX -Gs0 -GF -Gy -nologo -DOPENSSL_SYSNAME_WIN32 -DWIN32_LEAN_AND_MEAN -DL_ENDIAN -D_CRT_SECURE_NO_DEPRECATE:::WIN32::BN_LLONG RC4_INDEX EXPORT_VAR_AS_FN ${x86_gcc_opts}:${x86_asm}:win32n:win32",
+"VC-WIN32","cl:-W3 -Gs0 -GF -Gy -nologo -DOPENSSL_SYSNAME_WIN32 -DWIN32_LEAN_AND_MEAN -DL_ENDIAN -D_CRT_SECURE_NO_DEPRECATE:::WIN32::BN_LLONG RC4_INDEX EXPORT_VAR_AS_FN ${x86_gcc_opts}:${x86_asm}:win32n:win32",
 # Unified CE target
+"debug-VC-WIN32","cl:-W3 -WX -Gs0 -GF -Gy -Zi -nologo -DOPENSSL_SYSNAME_WIN32 -DWIN32_LEAN_AND_MEAN -DL_ENDIAN -D_CRT_SECURE_NO_DEPRECATE:::WIN32::BN_LLONG RC4_INDEX EXPORT_VAR_AS_FN ${x86_gcc_opts}:${x86_asm}:win32n:win32",
 "VC-CE","cl::::WINCE::BN_LLONG RC4_INDEX EXPORT_VAR_AS_FN ${x86_gcc_opts}:${no_asm}:win32",
 
 # Borland C++ 4.5
 "BC-32","bcc32::::WIN32::BN_LLONG DES_PTR RC4_INDEX EXPORT_VAR_AS_FN:${no_asm}:win32",
 
 # MinGW
-"mingw", "gcc:-mno-cygwin -DL_ENDIAN -fomit-frame-pointer -O3 -march=i486 -Wall:::MINGW32:-lws2_32 -lgdi32:BN_LLONG ${x86_gcc_des} ${x86_gcc_opts} EXPORT_VAR_AS_FN:${x86_asm}:coff:win32:cygwin-shared:-D_WINDLL -DOPENSSL_USE_APPLINK:-mno-cygwin:.dll.a",
+"mingw", "gcc:-mno-cygwin -DL_ENDIAN -DWIN32_LEAN_AND_MEAN -fomit-frame-pointer -O3 -march=i486 -Wall::-D_MT:MINGW32:-lws2_32 -lgdi32 -lcrypt32:BN_LLONG ${x86_gcc_des} ${x86_gcc_opts} EXPORT_VAR_AS_FN:${x86_asm}:coff:win32:cygwin-shared:-D_WINDLL -DOPENSSL_USE_APPLINK:-mno-cygwin:.dll.a",
 # As for OPENSSL_USE_APPLINK. Applink makes it possible to use .dll
 # compiled with one compiler with application compiled with another
 # compiler. It's possible to engage Applink support in mingw64 build,
@@ -504,7 +539,7 @@ my %table=(
 # handling, one can't seriously consider its binaries for using with
 # non-mingw64 run-time environment. And as mingw64 is always consistent
 # with itself, Applink is never engaged and can as well be omitted.
-"mingw64", "gcc:-mno-cygwin -DL_ENDIAN -O3 -Wall -DWIN32_LEAN_AND_MEAN -DUNICODE -D_UNICODE:::MINGW64:-lws2_32 -lgdi32:SIXTY_FOUR_BIT RC4_CHUNK_LL DES_INT EXPORT_VAR_AS_FN:${x86_64_asm}:mingw64:win32:cygwin-shared:-D_WINDLL:-mno-cygwin:.dll.a",
+"mingw64", "gcc:-mno-cygwin -DL_ENDIAN -O3 -Wall -DWIN32_LEAN_AND_MEAN -DUNICODE -D_UNICODE::-D_MT:MINGW64:-lws2_32 -lgdi32 -lcrypt32:SIXTY_FOUR_BIT RC4_CHUNK_LL DES_INT EXPORT_VAR_AS_FN:${x86_64_asm}:mingw64:win32:cygwin-shared:-D_WINDLL:-mno-cygwin:.dll.a",
 
 # UWIN 
 "UWIN", "cc:-DTERMIOS -DL_ENDIAN -O -Wall:::UWIN::BN_LLONG ${x86_gcc_des} ${x86_gcc_opts}:${no_asm}:win32",
@@ -540,12 +575,14 @@ my %table=(
 
 ##### MacOS X (a.k.a. Rhapsody or Darwin) setup
 "rhapsody-ppc-cc","cc:-O3 -DB_ENDIAN::(unknown):MACOSX_RHAPSODY::BN_LLONG RC4_CHAR RC4_CHUNK DES_UNROLL BF_PTR:${no_asm}::",
-"darwin-ppc-cc","cc:-arch ppc -O3 -DB_ENDIAN::-D_REENTRANT:MACOSX:-Wl,-search_paths_first%:BN_LLONG RC4_CHAR RC4_CHUNK DES_UNROLL BF_PTR:${ppc32_asm}:osx32:dlfcn:darwin-shared:-fPIC -fno-common:-arch ppc -dynamiclib:.\$(SHLIB_MAJOR).\$(SHLIB_MINOR).dylib",
+"darwin-ppc-cc","cc:-arch ppc -O3 -DB_ENDIAN -Wa,-force_cpusubtype_ALL::-D_REENTRANT:MACOSX:-Wl,-search_paths_first%:BN_LLONG RC4_CHAR RC4_CHUNK DES_UNROLL BF_PTR:${ppc32_asm}:osx32:dlfcn:darwin-shared:-fPIC -fno-common:-arch ppc -dynamiclib:.\$(SHLIB_MAJOR).\$(SHLIB_MINOR).dylib",
 "darwin64-ppc-cc","cc:-arch ppc64 -O3 -DB_ENDIAN::-D_REENTRANT:MACOSX:-Wl,-search_paths_first%:SIXTY_FOUR_BIT_LONG RC4_CHAR RC4_CHUNK DES_UNROLL BF_PTR:${ppc64_asm}:osx64:dlfcn:darwin-shared:-fPIC -fno-common:-arch ppc64 -dynamiclib:.\$(SHLIB_MAJOR).\$(SHLIB_MINOR).dylib",
-"darwin-i386-cc","cc:-arch i386 -O3 -fomit-frame-pointer -DL_ENDIAN::-D_REENTRANT:MACOSX:-Wl,-search_paths_first%:BN_LLONG RC4_INT RC4_CHUNK DES_UNROLL BF_PTR:${x86_asm}:macosx:dlfcn:darwin-shared:-fPIC -fno-common:-arch i386 -dynamiclib:.\$(SHLIB_MAJOR).\$(SHLIB_MINOR).dylib",
+"darwin-i386-cc","cc:-arch i386 -O3 -fomit-frame-pointer -DL_ENDIAN::-D_REENTRANT:MACOSX:-Wl,-search_paths_first%:BN_LLONG RC4_INT RC4_CHUNK DES_UNROLL BF_PTR:".eval{my $asm=$x86_asm;$asm=~s/cast\-586\.o//;$asm}.":macosx:dlfcn:darwin-shared:-fPIC -fno-common:-arch i386 -dynamiclib:.\$(SHLIB_MAJOR).\$(SHLIB_MINOR).dylib",
 "debug-darwin-i386-cc","cc:-arch i386 -g3 -DL_ENDIAN::-D_REENTRANT:MACOSX:-Wl,-search_paths_first%:BN_LLONG RC4_INT RC4_CHUNK DES_UNROLL BF_PTR:${x86_asm}:macosx:dlfcn:darwin-shared:-fPIC -fno-common:-arch i386 -dynamiclib:.\$(SHLIB_MAJOR).\$(SHLIB_MINOR).dylib",
-"darwin64-x86_64-cc","cc:-arch x86_64 -O3 -DL_ENDIAN -DMD32_REG_T=int -Wall::-D_REENTRANT:MACOSX:-Wl,-search_paths_first%:SIXTY_FOUR_BIT_LONG RC4_CHAR RC4_CHUNK BF_PTR2 DES_INT DES_UNROLL:${x86_64_asm}:macosx:dlfcn:darwin-shared:-fPIC -fno-common:-arch x86_64 -dynamiclib:.\$(SHLIB_MAJOR).\$(SHLIB_MINOR).dylib",
+"darwin64-x86_64-cc","cc:-arch x86_64 -O3 -DL_ENDIAN -Wall::-D_REENTRANT:MACOSX:-Wl,-search_paths_first%:SIXTY_FOUR_BIT_LONG RC4_CHAR RC4_CHUNK DES_INT DES_UNROLL:".eval{my $asm=$x86_64_asm;$asm=~s/rc4\-[^:]+//;$asm}.":macosx:dlfcn:darwin-shared:-fPIC -fno-common:-arch x86_64 -dynamiclib:.\$(SHLIB_MAJOR).\$(SHLIB_MINOR).dylib",
 "debug-darwin-ppc-cc","cc:-DBN_DEBUG -DREF_CHECK -DCONF_DEBUG -DCRYPTO_MDEBUG -DB_ENDIAN -g -Wall -O::-D_REENTRANT:MACOSX::BN_LLONG RC4_CHAR RC4_CHUNK DES_UNROLL BF_PTR:${ppc32_asm}:osx32:dlfcn:darwin-shared:-fPIC:-dynamiclib:.\$(SHLIB_MAJOR).\$(SHLIB_MINOR).dylib",
+# iPhoneOS/iOS
+"iphoneos-cross","llvm-gcc:-O3 -isysroot \$(CROSS_TOP)/SDKs/\$(CROSS_SDK) -fomit-frame-pointer -fno-common::-D_REENTRANT:iOS:-Wl,-search_paths_first%:BN_LLONG RC4_CHAR RC4_CHUNK DES_UNROLL BF_PTR:${no_asm}:dlfcn:darwin-shared:-fPIC -fno-common:-dynamiclib:.\$(SHLIB_MAJOR).\$(SHLIB_MINOR).dylib",
 
 ##### A/UX
 "aux3-gcc","gcc:-O2 -DTERMIO::(unknown):AUX:-lbsd:RC4_CHAR RC4_CHUNK DES_UNROLL BF_PTR:::",
@@ -560,20 +597,28 @@ my %table=(
 "OS2-EMX", "gcc::::::::",
 
 ##### VxWorks for various targets
+"vxworks-ppc60x","ccppc:-D_REENTRANT -mrtp -mhard-float -mstrict-align -fno-implicit-fp -DPPC32_fp60x -O2 -fstrength-reduce -fno-builtin -fno-strict-aliasing -Wall -DCPU=PPC32 -DTOOL_FAMILY=gnu -DTOOL=gnu -I\$(WIND_BASE)/target/usr/h -I\$(WIND_BASE)/target/usr/h/wrn/coreip:::VXWORKS:-Wl,--defsym,__wrs_rtp_base=0xe0000000 -L \$(WIND_BASE)/target/usr/lib/ppc/PPC32/common:::::",
+"vxworks-ppcgen","ccppc:-D_REENTRANT -mrtp -msoft-float -mstrict-align -O1 -fno-builtin -fno-strict-aliasing -Wall -DCPU=PPC32 -DTOOL_FAMILY=gnu -DTOOL=gnu -I\$(WIND_BASE)/target/usr/h -I\$(WIND_BASE)/target/usr/h/wrn/coreip:::VXWORKS:-Wl,--defsym,__wrs_rtp_base=0xe0000000 -L \$(WIND_BASE)/target/usr/lib/ppc/PPC32/sfcommon:::::",
 "vxworks-ppc405","ccppc:-g -msoft-float -mlongcall -DCPU=PPC405 -I\$(WIND_BASE)/target/h:::VXWORKS:-r:::::",
 "vxworks-ppc750","ccppc:-ansi -nostdinc -DPPC750 -D_REENTRANT -fvolatile -fno-builtin -fno-for-scope -fsigned-char -Wall -msoft-float -mlongcall -DCPU=PPC604 -I\$(WIND_BASE)/target/h \$(DEBUG_FLAG):::VXWORKS:-r:::::",
 "vxworks-ppc750-debug","ccppc:-ansi -nostdinc -DPPC750 -D_REENTRANT -fvolatile -fno-builtin -fno-for-scope -fsigned-char -Wall -msoft-float -mlongcall -DCPU=PPC604 -I\$(WIND_BASE)/target/h -DBN_DEBUG -DREF_CHECK -DCONF_DEBUG -DBN_CTX_DEBUG -DCRYPTO_MDEBUG -DPEDANTIC -DDEBUG_SAFESTACK -DDEBUG -g:::VXWORKS:-r:::::",
 "vxworks-ppc860","ccppc:-nostdinc -msoft-float -DCPU=PPC860 -DNO_STRINGS_H -I\$(WIND_BASE)/target/h:::VXWORKS:-r:::::",
-"vxworks-mipsle","ccmips:-B\$(WIND_BASE)/host/\$(WIND_HOST_TYPE)/lib/gcc-lib/ -DL_ENDIAN -EL -Wl,-EL -mips2 -mno-branch-likely -G 0 -fno-builtin -msoft-float -DCPU=MIPS32 -DMIPSEL -DNO_STRINGS_H -I\$(WIND_BASE)/target/h:::VXWORKS:-r::${no_asm}::::::ranlibmips:",
+"vxworks-simlinux","ccpentium:-B\$(WIND_BASE)/host/\$(WIND_HOST_TYPE)/lib/gcc-lib/ -D_VSB_CONFIG_FILE=\"\$(WIND_BASE)/target/lib/h/config/vsbConfig.h\" -DL_ENDIAN -DCPU=SIMLINUX -DTOOL_FAMILY=gnu -DTOOL=gnu -fno-builtin -fno-defer-pop -DNO_STRINGS_H -I\$(WIND_BASE)/target/h -I\$(WIND_BASE)/target/h/wrn/coreip -DOPENSSL_NO_HW_PADLOCK:::VXWORKS:-r::${no_asm}::::::ranlibpentium:",
+"vxworks-mips","ccmips:-mrtp -mips2 -O -G 0 -B\$(WIND_BASE)/host/\$(WIND_HOST_TYPE)/lib/gcc-lib/ -D_VSB_CONFIG_FILE=\"\$(WIND_BASE)/target/lib/h/config/vsbConfig.h\" -DCPU=MIPS32 -msoft-float -mno-branch-likely -DTOOL_FAMILY=gnu -DTOOL=gnu -fno-builtin -fno-defer-pop -DNO_STRINGS_H -I\$(WIND_BASE)/target/usr/h -I\$(WIND_BASE)/target/h/wrn/coreip::-D_REENTRANT:VXWORKS:-Wl,--defsym,__wrs_rtp_base=0xe0000000 -L \$(WIND_BASE)/target/usr/lib/mips/MIPSI32/sfcommon::${mips32_asm}:o32::::::ranlibmips:",
 
 ##### Compaq Non-Stop Kernel (Tandem)
 "tandem-c89","c89:-Ww -D__TANDEM -D_XOPEN_SOURCE -D_XOPEN_SOURCE_EXTENDED=1 -D_TANDEM_SOURCE -DB_ENDIAN::(unknown):::THIRTY_TWO_BIT:::",
 
+# uClinux
+"uClinux-dist","$ENV{'CC'}:\$(CFLAGS)::-D_REENTRANT::\$(LDFLAGS) \$(LDLIBS):BN_LLONG:${no_asm}:$ENV{'LIBSSL_dlfcn'}:linux-shared:-fPIC:-shared:.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR):$ENV{'RANLIB'}::",
+"uClinux-dist64","$ENV{'CC'}:\$(CFLAGS)::-D_REENTRANT::\$(LDFLAGS) \$(LDLIBS):SIXTY_FOUR_BIT_LONG:${no_asm}:$ENV{'LIBSSL_dlfcn'}:linux-shared:-fPIC:-shared:.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR):$ENV{'RANLIB'}::",
+
 );
 
 my @MK1MF_Builds=qw(VC-WIN64I VC-WIN64A
-		    VC-NT VC-CE VC-WIN32
-		    BC-32 OS2-EMX
+		    debug-VC-WIN64I debug-VC-WIN64A
+		    VC-NT VC-CE VC-WIN32 debug-VC-WIN32
+		    BC-32 
 		    netware-clib netware-clib-bsdsock
 		    netware-libc netware-libc-bsdsock);
 
@@ -598,6 +643,8 @@ my $idx_rmd160_obj = $idx++;
 my $idx_rc5_obj = $idx++;
 my $idx_wp_obj = $idx++;
 my $idx_cmll_obj = $idx++;
+my $idx_modes_obj = $idx++;
+my $idx_engines_obj = $idx++;
 my $idx_perlasm_scheme = $idx++;
 my $idx_dso_scheme = $idx++;
 my $idx_shared_target = $idx++;
@@ -609,10 +656,14 @@ my $idx_arflags = $idx++;
 my $idx_multilib = $idx++;
 
 my $prefix="";
+my $libdir="";
 my $openssldir="";
 my $exe_ext="";
-my $install_prefix="";
+my $install_prefix= "$ENV{'INSTALL_PREFIX'}";
 my $cross_compile_prefix="";
+my $fipsdir="/usr/local/ssl/fips-2.0";
+my $fipslibdir="";
+my $baseaddr="0xFB00000";
 my $no_threads=0;
 my $threads=0;
 my $no_shared=0; # but "no-shared" is default
@@ -647,27 +698,34 @@ my $cmll_enc="camellia.o cmll_misc.o cmll_cbc.o";
 my $processor="";
 my $default_ranlib;
 my $perl;
+my $fips=0;
 
+if (exists $ENV{FIPSDIR})
+	{
+	$fipsdir = $ENV{FIPSDIR};
+	$fipsdir =~ s/\/$//;
+	}
 
 # All of the following is disabled by default (RC5 was enabled before 0.9.8):
 
 my %disabled = ( # "what"         => "comment" [or special keyword "experimental"]
+		 "ec_nistp_64_gcc_128" => "default",
 		 "gmp"		  => "default",
-                 "jpake"          => "experimental",
-                 "mdc2"           => "default",
-                 "rc5"            => "default",
+		 "jpake"          => "experimental",
+		 "md2"            => "default",
+		 "rc5"            => "default",
 		 "rfc3779"	  => "default",
-                 "shared"         => "default",
+		 "sctp"       => "default",
+		 "shared"         => "default",
 		 "store"	  => "experimental",
-                 "zlib"           => "default",
-                 "zlib-dynamic"   => "default"
-               );
+		 "zlib"           => "default",
+		 "zlib-dynamic"   => "default"
+	       );
 my @experimental = ();
 
 # This is what $depflags will look like with the above defaults
 # (we need this to see if we should advise the user to run "make depend"):
-my $default_depflags = " -DOPENSSL_NO_GMP -DOPENSSL_NO_JPAKE -DOPENSSL_NO_MDC2 -DOPENSSL_NO_RC5 -DOPENSSL_NO_RFC3779 -DOPENSSL_NO_STORE";
-
+my $default_depflags = " -DOPENSSL_NO_EC_NISTP_64_GCC_128 -DOPENSSL_NO_GMP -DOPENSSL_NO_JPAKE -DOPENSSL_NO_MD2 -DOPENSSL_NO_RC5 -DOPENSSL_NO_RFC3779 -DOPENSSL_NO_SCTP -DOPENSSL_NO_STORE";
 
 # Explicit "no-..." options will be collected in %disabled along with the defaults.
 # To remove something from %disabled, use "enable-foo" (unless it's experimental).
@@ -725,6 +783,7 @@ PROCESS_ARGS:
 
 		# rewrite some options in "enable-..." form
 		s /^-?-?shared$/enable-shared/;
+		s /^sctp$/enable-sctp/;
 		s /^threads$/enable-threads/;
 		s /^zlib$/enable-zlib/;
 		s /^zlib-dynamic$/enable-zlib-dynamic/;
@@ -765,6 +824,10 @@ PROCESS_ARGS:
 			{
 			exit(&test_sanity());
 			}
+		elsif (/^--strict-warnings/)
+			{
+			$strict_warnings = 1;
+			}
 		elsif (/^reconfigure/ || /^reconf/)
 			{
 			if (open(IN,"<$Makefile"))
@@ -790,6 +853,10 @@ PROCESS_ARGS:
 			}
 		elsif (/^386$/)
 			{ $processor=386; }
+		elsif (/^fips$/)
+			{
+			$fips=1;
+			}
 		elsif (/^rsaref$/)
 			{
 			# No RSAref support any more since it's not needed.
@@ -804,12 +871,17 @@ PROCESS_ARGS:
 				}
 			elsif (/^-[^-]/ or /^\+/)
 				{
+				$_ =~ s/%([0-9a-f]{1,2})/chr(hex($1))/gei;
 				$flags.=$_." ";
 				}
 			elsif (/^--prefix=(.*)$/)
 				{
 				$prefix=$1;
 				}
+			elsif (/^--libdir=(.*)$/)
+				{
+				$libdir=$1;
+				}
 			elsif (/^--openssldir=(.*)$/)
 				{
 				$openssldir=$1;
@@ -830,6 +902,18 @@ PROCESS_ARGS:
 				{
 				$withargs{"zlib-include"}="-I$1";
 				}
+			elsif (/^--with-fipsdir=(.*)$/)
+				{
+				$fipsdir="$1";
+				}
+			elsif (/^--with-fipslibdir=(.*)$/)
+				{
+				$fipslibdir="$1";
+				}
+			elsif (/^--with-baseaddr=(.*)$/)
+				{
+				$baseaddr="$1";
+				}
 			elsif (/^--cross-compile-prefix=(.*)$/)
 				{
 				$cross_compile_prefix=$1;
@@ -904,6 +988,17 @@ if (defined($disabled{"md5"}) || defined($disabled{"rsa"}))
 	$disabled{"ssl2"} = "forced";
 	}
 
+if ($fips && $fipslibdir eq "")
+	{
+	$fipslibdir = $fipsdir . "/lib/";
+	}
+
+# RSAX ENGINE sets default non-FIPS RSA method.
+if ($fips)
+	{
+	$disabled{"rsax"} = "forced";
+	}
+
 # SSL 3.0 and TLS requires MD5 and SHA and either RSA or DSA+DH
 if (defined($disabled{"md5"}) || defined($disabled{"sha"})
     || (defined($disabled{"rsa"})
@@ -918,6 +1013,19 @@ if (defined($disabled{"tls1"}))
 	$disabled{"tlsext"} = "forced";
 	}
 
+if (defined($disabled{"ec"}) || defined($disabled{"dsa"})
+    || defined($disabled{"dh"}))
+	{
+	$disabled{"gost"} = "forced";
+	}
+
+# SRP and HEARTBEATS require TLSEXT
+if (defined($disabled{"tlsext"}))
+	{
+	$disabled{"srp"} = "forced";
+	$disabled{"heartbeats"} = "forced";
+	}
+
 if ($target eq "TABLE") {
 	foreach $target (sort keys %table) {
 		print_table_entry($target);
@@ -967,7 +1075,7 @@ foreach (sort (keys %disabled))
 	else
 		{
 		my ($ALGO, $algo);
-		($ALGO = $algo = $_) =~ tr/[a-z]/[A-Z]/;
+		($ALGO = $algo = $_) =~ tr/[\-a-z]/[_A-Z]/;
 
 		if (/^asm$/ || /^err$/ || /^hw$/ || /^hw-/)
 			{
@@ -987,6 +1095,8 @@ foreach (sort (keys %disabled))
 			else
 				{
 				push @skip, $algo;
+				# fix-up crypto/directory name(s)
+				@skip[$#skip]="whrlpool" if $algo eq "whirlpool";
 				print " (skip dir)";
 
 				$depflags .= " -DOPENSSL_NO_$ALGO";
@@ -1019,6 +1129,9 @@ $prefix=$openssldir if $prefix eq "";
 $default_ranlib= &which("ranlib") or $default_ranlib="true";
 $perl=$ENV{'PERL'} or $perl=&which("perl5") or $perl=&which("perl")
   or $perl="perl";
+my $make = $ENV{'MAKE'} || "make";
+
+$cross_compile_prefix=$ENV{'CROSS_COMPILE'} if $cross_compile_prefix eq "";
 
 chop $openssldir if $openssldir =~ /\/$/;
 chop $prefix if $prefix =~ /.\/$/;
@@ -1054,16 +1167,27 @@ my $rmd160_obj = $fields[$idx_rmd160_obj];
 my $rc5_obj = $fields[$idx_rc5_obj];
 my $wp_obj = $fields[$idx_wp_obj];
 my $cmll_obj = $fields[$idx_cmll_obj];
+my $modes_obj = $fields[$idx_modes_obj];
+my $engines_obj = $fields[$idx_engines_obj];
 my $perlasm_scheme = $fields[$idx_perlasm_scheme];
 my $dso_scheme = $fields[$idx_dso_scheme];
 my $shared_target = $fields[$idx_shared_target];
 my $shared_cflag = $fields[$idx_shared_cflag];
 my $shared_ldflag = $fields[$idx_shared_ldflag];
 my $shared_extension = $fields[$idx_shared_extension];
-my $ranlib = $fields[$idx_ranlib];
+my $ranlib = $ENV{'RANLIB'} || $fields[$idx_ranlib];
+my $ar = $ENV{'AR'} || "ar";
 my $arflags = $fields[$idx_arflags];
 my $multilib = $fields[$idx_multilib];
 
+# if $prefix/lib$multilib is not an existing directory, then
+# assume that it's not searched by linker automatically, in
+# which case adding $multilib suffix causes more grief than
+# we're ready to tolerate, so don't...
+$multilib="" if !-d "$prefix/lib$multilib";
+
+$libdir="lib$multilib" if $libdir eq "";
+
 $cflags = "$cflags$exp_cflags";
 
 # '%' in $lflags is used to split flags to "pre-" and post-flags
@@ -1071,6 +1195,12 @@ my ($prelflags,$postlflags)=split('%',$lflags);
 if (defined($postlflags))	{ $lflags=$postlflags;	}
 else				{ $lflags=$prelflags; undef $prelflags;	}
 
+if ($target =~ /^mingw/ && `$cc --target-help 2>&1` !~ m/\-mno\-cygwin/m)
+	{
+	$cflags =~ s/\-mno\-cygwin\s*//;
+	$shared_ldflag =~ s/\-mno\-cygwin\s*//;
+	}
+
 my $no_shared_warn=0;
 my $no_user_cflags=0;
 
@@ -1199,7 +1329,7 @@ if ($no_asm)
 	{
 	$cpuid_obj=$bn_obj=
 	$des_obj=$aes_obj=$bf_obj=$cast_obj=$rc4_obj=$rc5_obj=$cmll_obj=
-	$sha1_obj=$md5_obj=$rmd160_obj=$wp_obj="";
+	$modes_obj=$sha1_obj=$md5_obj=$rmd160_obj=$wp_obj=$engines_obj="";
 	}
 
 if (!$no_shared)
@@ -1218,7 +1348,14 @@ if ($zlib)
 	$cflags = "-DZLIB $cflags";
 	if (defined($disabled{"zlib-dynamic"}))
 		{
-		$lflags = "$lflags -lz";
+		if (defined($withargs{"zlib-lib"}))
+			{
+			$lflags = "$lflags -L" . $withargs{"zlib-lib"} . " -lz";
+			}
+		else
+			{
+			$lflags = "$lflags -lz";
+			}
 		}
 	else
 		{
@@ -1256,7 +1393,7 @@ if (!$IsMK1MF)
 		}
 	}
 
-$cpuid_obj.=" uplink.o uplink-cof.o" if ($cflags =~ /\-DOPENSSL_USE_APPLINK/);
+$cpuid_obj.=" uplink.o uplink-x86.o" if ($cflags =~ /\-DOPENSSL_USE_APPLINK/);
 
 #
 # Platform fix-ups
@@ -1324,6 +1461,14 @@ $cflags.=" -DOPENSSL_BN_ASM_PART_WORDS" if ($bn_obj =~ /bn-586/);
 $cflags.=" -DOPENSSL_IA32_SSE2" if (!$no_sse2 && $bn_obj =~ /86/);
 
 $cflags.=" -DOPENSSL_BN_ASM_MONT" if ($bn_obj =~ /-mont/);
+$cflags.=" -DOPENSSL_BN_ASM_MONT5" if ($bn_obj =~ /-mont5/);
+$cflags.=" -DOPENSSL_BN_ASM_GF2m" if ($bn_obj =~ /-gf2m/);
+
+if ($fips)
+	{
+	$openssl_other_defines.="#define OPENSSL_FIPS\n";
+	$cflags .= " -I\$(FIPSDIR)/include";
+	}
 
 $cpuid_obj="mem_clr.o"	unless ($cpuid_obj =~ /\.o$/);
 $des_obj=$des_enc	unless ($des_obj =~ /\.o$/);
@@ -1357,12 +1502,20 @@ if ($rmd160_obj =~ /\.o$/)
 if ($aes_obj =~ /\.o$/)
 	{
 	$cflags.=" -DAES_ASM";
+	# aes-ctr.o is not a real file, only indication that assembler
+	# module implements AES_ctr32_encrypt...
+	$cflags.=" -DAES_CTR_ASM" if ($aes_obj =~ s/\s*aes\-ctr\.o//);
+	# aes-xts.o indicates presense of AES_xts_[en|de]crypt...
+	$cflags.=" -DAES_XTS_ASM" if ($aes_obj =~ s/\s*aes\-xts\.o//);
+	$aes_obj =~ s/\s*(vpaes|aesni)\-x86\.o//g if ($no_sse2);
+	$cflags.=" -DVPAES_ASM" if ($aes_obj =~ m/vpaes/);
+	$cflags.=" -DBSAES_ASM" if ($aes_obj =~ m/bsaes/);
 	}
 else	{
 	$aes_obj=$aes_enc;
 	}
 $wp_obj="" if ($wp_obj =~ /mmx/ && $processor eq "386");
-if ($wp_obj =~ /\.o$/)
+if ($wp_obj =~ /\.o$/ && !$disabled{"whirlpool"})
 	{
 	$cflags.=" -DWHIRLPOOL_ASM";
 	}
@@ -1370,6 +1523,10 @@ else	{
 	$wp_obj="wp_block.o";
 	}
 $cmll_obj=$cmll_enc	unless ($cmll_obj =~ /.o$/);
+if ($modes_obj =~ /ghash/)
+	{
+	$cflags.=" -DGHASH_ASM";
+	}
 
 # "Stringify" the C flags string.  This permits it to be made part of a string
 # and works as well on command lines.
@@ -1407,6 +1564,16 @@ if ($shlib_version_number =~ /(^[0-9]*)\.([0-9\.]*)/)
 	$shlib_minor=$2;
 	}
 
+if ($strict_warnings)
+	{
+	my $wopt;
+	die "ERROR --strict-warnings requires gcc" unless ($cc =~ /gcc$/);
+	foreach $wopt (split /\s+/, $gcc_devteam_warn)
+		{
+		$cflags .= " $wopt" unless ($cflags =~ /$wopt/)
+		}
+	}
+
 open(IN,'<Makefile.org') || die "unable to read Makefile.org:$!\n";
 unlink("$Makefile.new") || die "unable to remove old $Makefile.new:$!\n" if -e "$Makefile.new";
 open(OUT,">$Makefile.new") || die "unable to create $Makefile.new:$!\n";
@@ -1425,6 +1592,7 @@ while (<IN>)
 		}
 	$sdirs = 0 unless /\\$/;
         s/engines // if (/^DIRS=/ && $disabled{"engine"});
+	s/ccgost// if (/^ENGDIRS=/ && $disabled{"gost"});
 	s/^VERSION=.*/VERSION=$version/;
 	s/^MAJOR=.*/MAJOR=$major/;
 	s/^MINOR=.*/MINOR=$minor/;
@@ -1436,20 +1604,22 @@ while (<IN>)
 	s/^INSTALLTOP=.*$/INSTALLTOP=$prefix/;
 	s/^MULTILIB=.*$/MULTILIB=$multilib/;
 	s/^OPENSSLDIR=.*$/OPENSSLDIR=$openssldir/;
+	s/^LIBDIR=.*$/LIBDIR=$libdir/;
 	s/^INSTALL_PREFIX=.*$/INSTALL_PREFIX=$install_prefix/;
 	s/^PLATFORM=.*$/PLATFORM=$target/;
 	s/^OPTIONS=.*$/OPTIONS=$options/;
 	s/^CONFIGURE_ARGS=.*$/CONFIGURE_ARGS=$argvstring/;
 	if ($cross_compile_prefix)
 		{
-		s/^CC=.*$/CROSS_COMPILE_PREFIX= $cross_compile_prefix\nCC= \$\(CROSS_COMPILE_PREFIX\)$cc/;
-		s/^AR=\s*/AR= \$\(CROSS_COMPILE_PREFIX\)/;
-		s/^NM=\s*/NM= \$\(CROSS_COMPILE_PREFIX\)/;
-		s/^RANLIB=\s*/RANLIB= \$\(CROSS_COMPILE_PREFIX\)/;
-		s/^MAKEDEPPROG=.*$/MAKEDEPPROG= \$\(CROSS_COMPILE_PREFIX\)$cc/ if $cc eq "gcc";
+		s/^CC=.*$/CROSS_COMPILE= $cross_compile_prefix\nCC= \$\(CROSS_COMPILE\)$cc/;
+		s/^AR=\s*/AR= \$\(CROSS_COMPILE\)/;
+		s/^NM=\s*/NM= \$\(CROSS_COMPILE\)/;
+		s/^RANLIB=\s*/RANLIB= \$\(CROSS_COMPILE\)/;
+		s/^MAKEDEPPROG=.*$/MAKEDEPPROG= \$\(CROSS_COMPILE\)$cc/ if $cc eq "gcc";
 		}
 	else	{
 		s/^CC=.*$/CC= $cc/;
+		s/^AR=\s*ar/AR= $ar/;
 		s/^RANLIB=.*/RANLIB= $ranlib/;
 		s/^MAKEDEPPROG=.*$/MAKEDEPPROG= $cc/ if $cc eq "gcc";
 		}
@@ -1471,6 +1641,8 @@ while (<IN>)
 	s/^RMD160_ASM_OBJ=.*$/RMD160_ASM_OBJ= $rmd160_obj/;
 	s/^WP_ASM_OBJ=.*$/WP_ASM_OBJ= $wp_obj/;
 	s/^CMLL_ENC=.*$/CMLL_ENC= $cmll_obj/;
+	s/^MODES_ASM_OBJ.=*$/MODES_ASM_OBJ= $modes_obj/;
+	s/^ENGINES_ASM_OBJ.=*$/ENGINES_ASM_OBJ= $engines_obj/;
 	s/^PERLASM_SCHEME=.*$/PERLASM_SCHEME= $perlasm_scheme/;
 	s/^PROCESSOR=.*/PROCESSOR= $processor/;
 	s/^ARFLAGS=.*/ARFLAGS= $arflags/;
@@ -1479,6 +1651,12 @@ while (<IN>)
 	s/^LIBKRB5=.*/LIBKRB5=$withargs{"krb5-lib"}/;
 	s/^LIBZLIB=.*/LIBZLIB=$withargs{"zlib-lib"}/;
 	s/^ZLIB_INCLUDE=.*/ZLIB_INCLUDE=$withargs{"zlib-include"}/;
+
+	s/^FIPSDIR=.*/FIPSDIR=$fipsdir/;
+	s/^FIPSLIBDIR=.*/FIPSLIBDIR=$fipslibdir/;
+	s/^FIPSCANLIB=.*/FIPSCANLIB=libcrypto/ if $fips;
+	s/^BASEADDR=.*/BASEADDR=$baseaddr/;
+
 	s/^SHLIB_TARGET=.*/SHLIB_TARGET=$shared_target/;
 	s/^SHLIB_MARK=.*/SHLIB_MARK=$shared_mark/;
 	s/^SHARED_LIBS=.*/SHARED_LIBS=\$(SHARED_CRYPTO) \$(SHARED_SSL)/ if (!$no_shared);
@@ -1522,7 +1700,9 @@ print "RC5_ENC       =$rc5_obj\n";
 print "MD5_OBJ_ASM   =$md5_obj\n";
 print "SHA1_OBJ_ASM  =$sha1_obj\n";
 print "RMD160_OBJ_ASM=$rmd160_obj\n";
-print "CMLL_ENC=     =$cmll_obj\n";
+print "CMLL_ENC      =$cmll_obj\n";
+print "MODES_OBJ     =$modes_obj\n";
+print "ENGINES_OBJ   =$engines_obj\n";
 print "PROCESSOR     =$processor\n";
 print "RANLIB        =$ranlib\n";
 print "ARFLAGS       =$arflags\n";
@@ -1622,10 +1802,7 @@ while (<IN>)
 		}
 	elsif	(/^#define\s+ENGINESDIR/)
 		{
-		# $foo is to become "$prefix/lib$multilib/engines";
-		# as Makefile.org and engines/Makefile are adapted for
-		# $multilib suffix.
-		my $foo = "$prefix/lib/engines";
+		my $foo = "$prefix/$libdir/engines";
 		$foo =~ s/\\/\\\\/g;
 		print OUT "#define ENGINESDIR \"$foo\"\n";
 		}
@@ -1733,7 +1910,7 @@ if($IsMK1MF) {
 EOF
 	close(OUT);
 } else {
-	my $make_command = "make PERL=\'$perl\'";
+	my $make_command = "$make PERL=\'$perl\'";
 	my $make_targets = "";
 	$make_targets .= " links" if $symlink;
 	$make_targets .= " depend" if $depflags ne $default_depflags && $make_depend;
@@ -1741,11 +1918,11 @@ EOF
 	(system $make_command.$make_targets) == 0 or exit $?
 		if $make_targets ne "";
 	if ( $perl =~ m@^/@) {
-	    &dofile("tools/c_rehash",$perl,'^#!/', '#!%s','^my \$dir;$', 'my $dir = "' . $openssldir . '";');
+	    &dofile("tools/c_rehash",$perl,'^#!/', '#!%s','^my \$dir;$', 'my $dir = "' . $openssldir . '";', '^my \$prefix;$', 'my $prefix = "' . $prefix . '";');
 	    &dofile("apps/CA.pl",$perl,'^#!/', '#!%s');
 	} else {
 	    # No path for Perl known ...
-	    &dofile("tools/c_rehash",'/usr/local/bin/perl','^#!/', '#!%s','^my \$dir;$', 'my $dir = "' . $openssldir . '";');
+	    &dofile("tools/c_rehash",'/usr/local/bin/perl','^#!/', '#!%s','^my \$dir;$', 'my $dir = "' . $openssldir . '";',  '^my \$prefix;$', 'my $prefix = "' . $prefix . '";');
 	    &dofile("apps/CA.pl",'/usr/local/bin/perl','^#!/', '#!%s');
 	}
 	if ($depflags ne $default_depflags && !$make_depend) {
@@ -1918,7 +2095,8 @@ sub print_table_entry
 	(my $cc,my $cflags,my $unistd,my $thread_cflag,my $sys_id,my $lflags,
 	my $bn_ops,my $cpuid_obj,my $bn_obj,my $des_obj,my $aes_obj, my $bf_obj,
 	my $md5_obj,my $sha1_obj,my $cast_obj,my $rc4_obj,my $rmd160_obj,
-	my $rc5_obj,my $wp_obj,my $cmll_obj,my $perlasm_scheme,my $dso_scheme,my $shared_target,my $shared_cflag,
+	my $rc5_obj,my $wp_obj,my $cmll_obj,my $modes_obj, my $engines_obj,
+	my $perlasm_scheme,my $dso_scheme,my $shared_target,my $shared_cflag,
 	my $shared_ldflag,my $shared_extension,my $ranlib,my $arflags,my $multilib)=
 	split(/\s*:\s*/,$table{$target} . ":" x 30 , -1);
 			
@@ -1945,6 +2123,8 @@ sub print_table_entry
 \$rc5_obj      = $rc5_obj
 \$wp_obj       = $wp_obj
 \$cmll_obj     = $cmll_obj
+\$modes_obj    = $modes_obj
+\$engines_obj  = $engines_obj
 \$perlasm_scheme = $perlasm_scheme
 \$dso_scheme   = $dso_scheme
 \$shared_target= $shared_target
@@ -1970,23 +2150,23 @@ sub test_sanity
 		{
 		@fields = split(/\s*:\s*/,$table{$target} . ":" x 30 , -1);
 
-		if ($fields[$idx_dso_scheme-1] =~ /^(dl|dlfcn|win32|vms)$/)
+		if ($fields[$idx_dso_scheme-1] =~ /^(beos|dl|dlfcn|win32|vms)$/)
 			{
 			$errorcnt++;
 			print STDERR "SANITY ERROR: '$target' has the dso_scheme [$idx_dso_scheme] values\n";
 			print STDERR "              in the previous field\n";
 			}
-		elsif ($fields[$idx_dso_scheme+1] =~ /^(dl|dlfcn|win32|vms)$/)
+		elsif ($fields[$idx_dso_scheme+1] =~ /^(beos|dl|dlfcn|win32|vms)$/)
 			{
 			$errorcnt++;
 			print STDERR "SANITY ERROR: '$target' has the dso_scheme [$idx_dso_scheme] values\n";
 			print STDERR "              in the following field\n";
 			}
-		elsif ($fields[$idx_dso_scheme] !~ /^(dl|dlfcn|win32|vms|)$/)
+		elsif ($fields[$idx_dso_scheme] !~ /^(beos|dl|dlfcn|win32|vms|)$/)
 			{
 			$errorcnt++;
 			print STDERR "SANITY ERROR: '$target' has the dso_scheme [$idx_dso_scheme] field = ",$fields[$idx_dso_scheme],"\n";
-			print STDERR "              valid values are 'dl', 'dlfcn', 'win32' and 'vms'\n";
+			print STDERR "              valid values are 'beos', 'dl', 'dlfcn', 'win32' and 'vms'\n";
 			}
 		}
 	print STDERR "No sanity errors detected!\n" if $errorcnt == 0;

FAQ

@@ -10,6 +10,7 @@ OpenSSL  -  Frequently Asked Questions
 * Why aren't tools like 'autoconf' and 'libtool' used?
 * What is an 'engine' version?
 * How do I check the authenticity of the OpenSSL distribution?
+* How does the versioning scheme work?
 
 [LEGAL] Legal questions
 
@@ -52,6 +53,9 @@ OpenSSL  -  Frequently Asked Questions
 * Why does the OpenSSL test suite fail in sha512t on x86 CPU?
 * Why does compiler fail to compile sha512.c?
 * Test suite still fails, what to do?
+* I think I've found a bug, what should I do?
+* I'm SURE I've found a bug, how do I report it?
+* I've found a security issue, how do I report it?
 
 [PROG] Questions about programming with OpenSSL
 
@@ -70,6 +74,7 @@ OpenSSL  -  Frequently Asked Questions
 * I think I've detected a memory leak, is this a bug?
 * Why does Valgrind complain about the use of uninitialized data?
 * Why doesn't a memory BIO work when a file does?
+* Where are the declarations and implementations of d2i_X509() etc?
 
 ===============================================================================
 
@@ -78,7 +83,7 @@ OpenSSL  -  Frequently Asked Questions
 * Which is the current version of OpenSSL?
 
 The current version is available from <URL: http://www.openssl.org>.
-OpenSSL 0.9.8j was released on Jan 7th, 2009.
+OpenSSL 1.0.1c was released on May 10th, 2012.
 
 In addition to the current stable release, you can also access daily
 snapshots of the OpenSSL development version at <URL:
@@ -94,14 +99,19 @@ explains how to install this library.
 
 OpenSSL includes a command line utility that can be used to perform a
 variety of cryptographic functions.  It is described in the openssl(1)
-manpage.  Documentation for developers is currently being written.  A
-few manual pages already are available; overviews over libcrypto and
+manpage.  Documentation for developers is currently being written. Many
+manual pages are available; overviews over libcrypto and
 libssl are given in the crypto(3) and ssl(3) manpages.
 
 The OpenSSL manpages are installed in /usr/local/ssl/man/ (or a
 different directory if you specified one as described in INSTALL).
 In addition, you can read the most current versions at
-<URL: http://www.openssl.org/docs/>.
+<URL: http://www.openssl.org/docs/>. Note that the online documents refer
+to the very latest development versions of OpenSSL and may include features
+not present in released versions. If in doubt refer to the documentation
+that came with the version of OpenSSL you are using. The pod format
+documentation is included in each OpenSSL distribution under the docs
+directory.
 
 For information on parts of libcrypto that are not yet documented, you
 might want to read Ariel Glenn's documentation on SSLeay 0.9, OpenSSL's
@@ -127,7 +137,7 @@ OpenSSL.  Information on the OpenSSL mailing lists is available from
 * Where can I get a compiled version of OpenSSL?
 
 You can finder pointers to binary distributions in
-http://www.openssl.org/related/binaries.html .
+<URL: http://www.openssl.org/related/binaries.html> .
 
 Some applications that use OpenSSL are distributed in binary form.
 When using such an application, you don't need to install OpenSSL
@@ -166,6 +176,19 @@ just do:
 
    pgp TARBALL.asc
 
+* How does the versioning scheme work?
+
+After the release of OpenSSL 1.0.0 the versioning scheme changed. Letter 
+releases (e.g. 1.0.1a) can only contain bug and security fixes and no
+new features. Minor releases change the last number (e.g. 1.0.2) and 
+can contain new features that retain binary compatibility. Changes to
+the middle number are considered major releases and neither source nor
+binary compatibility is guaranteed.
+
+Therefore the answer to the common question "when will feature X be
+backported to OpenSSL 1.0.0/0.9.8?" is "never" but it could appear
+in the next minor release.
+
 [LEGAL] =======================================================================
 
 * Do I need patent licenses to use OpenSSL?
@@ -277,7 +300,7 @@ current directory in this case, but this has changed with 0.9.6a.)
 Check out the CA.pl(1) manual page. This provides a simple wrapper round
 the 'req', 'verify', 'ca' and 'pkcs12' utilities. For finer control check
 out the manual pages for the individual utilities and the certificate
-extensions documentation (currently in doc/openssl.txt).
+extensions documentation (in ca(1), req(1), x509v3_config(5) )
 
 
 * Why can't I create certificate requests?
@@ -459,7 +482,7 @@ administrators.
 Other projects do have other policies so you can for example extract the CA
 bundle used by Mozilla and/or modssl as described in this article:
 
-  http://www.mail-archive.com/modssl-users@modssl.org/msg16980.html
+  <URL: http://www.mail-archive.com/modssl-users@modssl.org/msg16980.html>
 
 
 [BUILD] =======================================================================
@@ -501,7 +524,7 @@ when you run the test suite (using "make test").  The message returned is
 "bc: 1 not implemented".
 
 The best way to deal with this is to find another implementation of bc
-and compile/install it.  GNU bc (see http://www.gnu.org/software/software.html
+and compile/install it.  GNU bc (see <URL: http://www.gnu.org/software/software.html>
 for download instructions) can be safely used, for example.
 
 
@@ -512,7 +535,7 @@ that the OpenSSL bntest throws at it.  This gets triggered when you run the
 test suite (using "make test").  The message returned is "bc: stack empty".
 
 The best way to deal with this is to find another implementation of bc
-and compile/install it.  GNU bc (see http://www.gnu.org/software/software.html
+and compile/install it.  GNU bc (see <URL: http://www.gnu.org/software/software.html>
 for download instructions) can be safely used, for example.
 
 
@@ -705,6 +728,46 @@ never make sense, and tend to emerge when you least expect them. In order
 to identify one, drop optimization level, e.g. by editing CFLAG line in
 top-level Makefile, recompile and re-run the test.
 
+* I think I've found a bug, what should I do?
+
+If you are a new user then it is quite likely you haven't found a bug and
+something is happening you aren't familiar with. Check this FAQ, the associated
+documentation and the mailing lists for similar queries. If you are still
+unsure whether it is a bug or not submit a query to the openssl-users mailing
+list.
+
+
+* I'm SURE I've found a bug, how do I report it?
+
+Bug reports with no security implications should be sent to the request
+tracker. This can be done by mailing the report to <rt@openssl.org> (or its
+alias <openssl-bugs@openssl.org>), please note that messages sent to the
+request tracker also appear in the public openssl-dev mailing list.
+
+The report should be in plain text. Any patches should be sent as
+plain text attachments because some mailers corrupt patches sent inline.
+If your issue affects multiple versions of OpenSSL check any patches apply
+cleanly and, if possible include patches to each affected version.
+
+The report should be given a meaningful subject line briefly summarising the
+issue. Just "bug in OpenSSL" or "bug in OpenSSL 0.9.8n" is not very helpful.
+
+By sending reports to the request tracker the bug can then be given a priority
+and assigned to the appropriate maintainer. The history of discussions can be
+accessed and if the issue has been addressed or a reason why not. If patches
+are only sent to openssl-dev they can be mislaid if a team member has to
+wade through months of old messages to review the discussion.
+
+See also <URL: http://www.openssl.org/support/rt.html>
+
+
+* I've found a security issue, how do I report it?
+
+If you think your bug has security implications then please send it to
+openssl-security@openssl.org if you don't get a prompt reply at least 
+acknowledging receipt then resend or mail it directly to one of the
+more active team members (e.g. Steve).
+
 [PROG] ========================================================================
 
 * Is OpenSSL thread-safe?
@@ -718,7 +781,7 @@ file.
 Multi-threaded applications must provide two callback functions to
 OpenSSL by calling CRYPTO_set_locking_callback() and
 CRYPTO_set_id_callback(), for all versions of OpenSSL up to and
-including 0.9.8[abc...]. As of version 0.9.9, CRYPTO_set_id_callback()
+including 0.9.8[abc...]. As of version 1.0.0, CRYPTO_set_id_callback()
 and associated APIs are deprecated by CRYPTO_THREADID_set_callback()
 and friends. This is described in the threads(3) manpage.
 
@@ -964,4 +1027,15 @@ is needed. This must be done by calling:
 See the manual pages for more details.
 
 
+* Where are the declarations and implementations of d2i_X509() etc?
+
+These are defined and implemented by macros of the form:
+
+
+ DECLARE_ASN1_FUNCTIONS(X509) and IMPLEMENT_ASN1_FUNCTIONS(X509)
+
+The implementation passes an ASN1 "template" defining the structure into an
+ASN1 interpreter using generalised functions such as ASN1_item_d2i().
+
+
 ===============================================================================

INSTALL

@@ -103,6 +103,12 @@
                 define preprocessor symbols, specify additional libraries,
                 library directories or other compiler options.
 
+  -DHAVE_CRYPTODEV Enable the BSD cryptodev engine even if we are not using
+		BSD. Useful if you are running ocf-linux or something
+		similar. Once enabled you can also enable the use of
+		cryptodev digests, which is usually slower unless you have
+		large amounts data. Use -DUSE_CRYPTODEV_DIGESTS to force
+		it.
 
  Installation in Detail
  ----------------------

INSTALL.VMS

@@ -71,7 +71,7 @@ the top to understand how to use them.  However, if you want to
 compile all you can get, the simplest is to use MAKEVMS.COM in the top
 directory.  The syntax is the following:
 
-  @MAKEVMS <option> <rsaref-p> <debug-p> [<compiler>]
+  @MAKEVMS <option> <bits> <debug-p> [<compiler>]
 
 <option> must be one of the following:
 
@@ -87,24 +87,11 @@ directory.  The syntax is the following:
       TEST      Just build the "[.xxx.EXE.TEST]" test programs for OpenSSL.
       APPS      Just build the "[.xxx.EXE.APPS]" application programs for OpenSSL.
 
-<rsaref-p> must be one of the following:
+<bits> must be one of the following:
 
-      RSAREF    compile using the RSAREF Library
-      NORSAREF  compile without using RSAREF
-
-Note 0: The RSAREF library IS NO LONGER NEEDED.  The RSA patent
-        expires September 20, 2000, and RSA Security chose to make
-        the algorithm public domain two weeks before that.
-
-Note 1: If you still want to use RSAREF, the library is NOT INCLUDED
-        and you have to download it.  RSA Security doesn't carry it
-        any more, but there are a number of places where you can find
-        it.  You have to get the ".tar-Z" file as the ".zip" file
-        doesn't have the directory structure stored.  You have to
-        extract the file into the [.RSAREF] directory as that is where
-        the scripts will look for the files.
-
-Note 2: I have never done this, so I've no idea if it works or not.
+      ""        compile using default pointer size
+      32        compile using 32 bit pointer size
+      64        compile using 64 bit pointer size
 
 <debug-p> must be one of the following:
 
@@ -117,12 +104,13 @@ Note 2: I have never done this, so I've no idea if it works or not.
       GNUC      For GNU C.
 
 
-You will find the crypto library in [.xxx.EXE.CRYPTO], called LIBCRYPTO.OLB,
-where xxx is VAX or AXP.  You will find the SSL library in [.xxx.EXE.SSL],
-named LIBSSL.OLB, and you will find a bunch of useful programs in
-[.xxx.EXE.APPS].  However, these shouldn't be used right off unless it's
-just to test them.  For production use, make sure you install first, see
-Installation below.
+You will find the crypto library in [.xxx.EXE.CRYPTO] (where xxx is VAX,
+ALPHA or IA64), called SSL_LIBCRYPTO32.OLB or SSL_LIBCRYPTO.OLB depending
+on how it was built.  You will find the SSL library in [.xxx.EXE.SSL],
+named SSL_LIBSSL32.OLB or SSL_LIBSSL.OLB, and you will find a bunch of
+useful programs in [.xxx.EXE.APPS].  However, these shouldn't be used
+right off unless it's just to test them.  For production use, make sure
+you install first, see Installation below.
 
 Note 1: Some programs in this package require a TCP/IP library.
 
@@ -170,12 +158,14 @@ Installation:
 
 Installation is easy, just do the following:
 
-  @INSTALL <root>
+  @INSTALL <root> <bits>
 
 <root> is the directory in which everything will be installed,
 subdirectories, libraries, header files, programs and startup command
 procedures.
 
+<bits> works the same way as for MAKEVMS.COM
+
 N.B.: INSTALL.COM builds a new directory structure, different from
 the directory tree where you have now build OpenSSL.
 
@@ -196,6 +186,10 @@ following command procedures:
         sets up the symbols to the applications.  Should be called
         from for example SYS$MANAGER:SYLOGIN.COM 
 
+  OPENSSL_UNDO.COM
+
+	deassigns the logical names created with OPENSSL_STARTUP.COM.
+
 The logical names that are set up are the following:
 
   SSLROOT       a dotted concealed logical name pointing at the
@@ -203,7 +197,6 @@ The logical names that are set up are the following:
 
   SSLCERTS      Initially an empty directory, this is the default
 		location for certificate files.
-  SSLMISC	Various scripts.
   SSLPRIVATE	Initially an empty directory, this is the default
 		location for private key files.
 
@@ -211,8 +204,9 @@ The logical names that are set up are the following:
 		programs.
   SSLINCLUDE    Contains the header files needed if you want to
 		compile programs with libcrypto or libssl.
-  SSLLIB        Contains the OpenSSL library files (LIBCRYPTO.OLB
-		and LIBSSL.OLB) themselves.
+  SSLLIB        Contains the OpenSSL library files themselves:
+  		- SSL_LIBCRYPTO32.OLB and SSL_LIBSSL32.OLB or
+		- SSL_LIBCRYPTO.OLB and SSL_LIBSSL.OLB
 
   OPENSSL	Same as SSLINCLUDE.  This is because the standard
 		way to include OpenSSL header files from version
@@ -296,4 +290,4 @@ have any ideas.
 
 --
 Richard Levitte <richard@levitte.org>
-2000-02-27
+2000-02-27, 2011-03-18

INSTALL.W32

@@ -27,7 +27,7 @@
 
 - Netwide Assembler, a.k.a. NASM, available from http://nasm.sourceforge.net/
   is required if you intend to utilize assembler modules. Note that NASM
-  is the only supported assembler.
+  is now the only supported assembler.
 
  If you are compiling from a tarball or a CVS snapshot then the Win32 files
  may well be not up to date. This may mean that some "tweaking" is required to
@@ -41,9 +41,9 @@
  C++, then you will need already mentioned Netwide Assembler binary,
  nasmw.exe or nasm.exe, to be available on your %PATH%.
 
- Firstly you should run Configure:
+ Firstly you should run Configure with platform VC-WIN32:
 
- > perl Configure VC-WIN32 --prefix=c:/some/openssl/dir
+ > perl Configure VC-WIN32 --prefix=c:\some\openssl\dir
 
  Where the prefix argument specifies where OpenSSL will be installed to.
 
@@ -56,6 +56,7 @@
 
  - If you don't want to use the assembly language files at all then run:
 
+   > perl Configure VC-WIN32 no-asm --prefix=c:/some/openssl/dir
    > ms\do_ms
 
  If you get errors about things not having numbers assigned then check the
@@ -80,16 +81,13 @@
 
  There are various changes you can make to the Win32 compile
  environment. By default the library is not compiled with debugging
- symbols. If you add 'debug' to the mk1mf.pl lines in the do_* batch
- file then debugging symbols will be compiled in. Note that mk1mf.pl
- expects the platform to be the last argument on the command line, so
- 'debug' must appear before that, as all other options.
+ symbols. If you use the platform debug-VC-WIN32 instead of VC-WIN32
+ then debugging symbols will be compiled in.
 
-
- By default in 0.9.8 OpenSSL will compile builtin ENGINES into the
- libeay32.dll shared library. If you specify the "no-static-engine"
+ By default in 1.0.0 OpenSSL will compile builtin ENGINES into the
+ separate shared librariesy. If you specify the "enable-static-engine"
  option on the command line to Configure the shared library build
- (ms\ntdll.mak) will compile the engines as separate DLLs.
+ (ms\ntdll.mak) will compile the engines into libeay32.dll instead.
 
  The default Win32 environment is to leave out any Windows NT specific
  features.
@@ -102,7 +100,6 @@
  ms\nt.mak
 
 
-
  Borland C++ builder 5
  ---------------------
 
@@ -188,6 +185,15 @@
    required. Run the installers and do whatever magic they say it takes
    to start MSYS bash shell with GNU tools on its PATH.
 
+   N.B. Since source tar-ball can contain symbolic links, it's essential
+   that you use accompanying MSYS tar to unpack the source. It will
+   either handle them in one way or another or fail to extract them,
+   which does the trick too. Latter means that you may safely ignore all
+   "cannot create symlink" messages, as they will be "re-created" at
+   configure stage by copying corresponding files. Alternative programs
+   were observed to create empty files instead, which results in build
+   failure.
+
  * Compile OpenSSL:
 
    $ ./config
@@ -300,7 +306,18 @@
  desktop, which is not available to service processes. The toolkit is
  designed to detect in which context it's currently executed, GUI,
  console app or service, and act accordingly, namely whether or not to
- actually make GUI calls.
+ actually make GUI calls. Additionally those who wish to
+ /DELAYLOAD:GDI32.DLL and /DELAYLOAD:USER32.DLL and actually keep them
+ off service process should consider implementing and exporting from
+ .exe image in question own _OPENSSL_isservice not relying on USER32.DLL.
+ E.g., on Windows Vista and later you could:
+
+	__declspec(dllexport) __cdecl BOOL _OPENSSL_isservice(void)
+	{   DWORD sess;
+	    if (ProcessIdToSessionId(GetCurrentProcessId(),&sess))
+	        return sess==0;
+	    return FALSE;
+	}
 
  If you link with OpenSSL .DLLs, then you're expected to include into
  your application code small "shim" snippet, which provides glue between

LICENSE

@@ -12,7 +12,7 @@
   ---------------
 
 /* ====================================================================
- * Copyright (c) 1998-2008 The OpenSSL Project.  All rights reserved.
+ * Copyright (c) 1998-2011 The OpenSSL Project.  All rights reserved.
  *
  * Redistribution and use in source and binary forms, with or without
  * modification, are permitted provided that the following conditions

Makefile.org

@@ -71,6 +71,7 @@ PERL= perl
 TAR= tar
 TARFLAGS= --no-recursion
 MAKEDEPPROG=makedepend
+LIBDIR=lib
 
 # We let the C compiler driver to take care of .s files. This is done in
 # order to be excused from maintaining a separate set of architecture
@@ -98,6 +99,8 @@ SHA1_ASM_OBJ=
 RMD160_ASM_OBJ= 
 WP_ASM_OBJ=
 CMLL_ENC=
+MODES_ASM_OBJ=
+ENGINES_ASM_OBJ=
 PERLASM_SCHEME=
 
 # KRB5 stuff
@@ -108,7 +111,32 @@ LIBKRB5=
 ZLIB_INCLUDE=
 LIBZLIB=
 
+# TOP level FIPS install directory.
+FIPSDIR=
+
+# This is the location of fipscanister.o and friends.
+# The FIPS module build will place it $(INSTALLTOP)/lib
+# but since $(INSTALLTOP) can only take the default value
+# when the module is built it will be in /usr/local/ssl/lib
+# $(INSTALLTOP) for this build may be different so hard
+# code the path.
+
+FIPSLIBDIR=
+
+# The location of the library which contains fipscanister.o
+# normally it will be libcrypto unless fipsdso is set in which
+# case it will be libfips. If not compiling in FIPS mode at all
+# this is empty making it a useful test for a FIPS compile.
+
+FIPSCANLIB=
+
+# Shared library base address. Currently only used on Windows.
+#
+
+BASEADDR=
+
 DIRS=   crypto ssl engines apps test tools
+ENGDIRS= ccgost
 SHLIBDIRS= crypto ssl
 
 # dirs in crypto to build
@@ -119,7 +147,7 @@ SDIRS=  \
 	bn ec rsa dsa ecdsa dh ecdh dso engine \
 	buffer bio stack lhash rand err \
 	evp asn1 pem x509 x509v3 conf txt_db pkcs7 pkcs12 comp ocsp ui krb5 \
-	cms pqueue ts jpake store
+	cms pqueue ts jpake srp store cmac
 # keep in mind that the above list is adjusted by ./Configure
 # according to no-xxx arguments...
 
@@ -170,7 +198,7 @@ CLEARENV=	TOP= && unset TOP $${LIB+LIB} $${LIBS+LIBS}	\
 		$${EXHEADER+EXHEADER} $${HEADER+HEADER}		\
 		$${GENERAL+GENERAL} $${CFLAGS+CFLAGS}		\
 		$${ASFLAGS+ASFLAGS} $${AFLAGS+AFLAGS}		\
-		$${LDCMD+LDCMD} $${LDFLAGS+LDFLAGS}		\
+		$${LDCMD+LDCMD} $${LDFLAGS+LDFLAGS} $${SCRIPTS+SCRIPTS}	\
 		$${SHAREDCMD+SHAREDCMD} $${SHAREDFLAGS+SHAREDFLAGS}	\
 		$${SHARED_LIB+SHARED_LIB} $${LIBEXTRAS+LIBEXTRAS}
 
@@ -178,16 +206,18 @@ BUILDENV=	PLATFORM='$(PLATFORM)' PROCESSOR='$(PROCESSOR)' \
 		CC='$(CC)' CFLAG='$(CFLAG)' 			\
 		AS='$(CC)' ASFLAG='$(CFLAG) -c'			\
 		AR='$(AR)' NM='$(NM)' RANLIB='$(RANLIB)'	\
-		CROSS_COMPILE_PREFIX='$(CROSS_COMPILE_PREFIX)'	\
-		PERL='$(PERL)'					\
-		SDIRS='$(SDIRS)' LIBRPATH='$(INSTALLTOP)/lib'	\
+		CROSS_COMPILE='$(CROSS_COMPILE)'	\
+		PERL='$(PERL)' ENGDIRS='$(ENGDIRS)'		\
+		SDIRS='$(SDIRS)' LIBRPATH='$(INSTALLTOP)/$(LIBDIR)'	\
 		INSTALL_PREFIX='$(INSTALL_PREFIX)'		\
 		INSTALLTOP='$(INSTALLTOP)' OPENSSLDIR='$(OPENSSLDIR)'	\
+		LIBDIR='$(LIBDIR)'				\
 		MAKEDEPEND='$$$${TOP}/util/domd $$$${TOP} -MD $(MAKEDEPPROG)' \
 		DEPFLAG='-DOPENSSL_NO_DEPRECATED $(DEPFLAG)'	\
 		MAKEDEPPROG='$(MAKEDEPPROG)'			\
 		SHARED_LDFLAGS='$(SHARED_LDFLAGS)'		\
 		KRB5_INCLUDES='$(KRB5_INCLUDES)' LIBKRB5='$(LIBKRB5)'	\
+		ZLIB_INCLUDE='$(ZLIB_INCLUDE)' LIBZLIB='$(LIBZLIB)'	\
 		EXE_EXT='$(EXE_EXT)' SHARED_LIBS='$(SHARED_LIBS)'	\
 		SHLIB_EXT='$(SHLIB_EXT)' SHLIB_TARGET='$(SHLIB_TARGET)'	\
 		PEX_LIBS='$(PEX_LIBS)' EX_LIBS='$(EX_LIBS)'	\
@@ -200,7 +230,12 @@ BUILDENV=	PLATFORM='$(PLATFORM)' PROCESSOR='$(PROCESSOR)' \
 		MD5_ASM_OBJ='$(MD5_ASM_OBJ)'			\
 		RMD160_ASM_OBJ='$(RMD160_ASM_OBJ)'		\
 		WP_ASM_OBJ='$(WP_ASM_OBJ)'			\
+		MODES_ASM_OBJ='$(MODES_ASM_OBJ)'		\
+		ENGINES_ASM_OBJ='$(ENGINES_ASM_OBJ)'		\
 		PERLASM_SCHEME='$(PERLASM_SCHEME)'		\
+		FIPSLIBDIR='${FIPSLIBDIR}'			\
+		FIPSDIR='${FIPSDIR}'				\
+		FIPSCANLIB="$${FIPSCANLIB:-$(FIPSCANLIB)}"	\
 		THIS=$${THIS:-$@} MAKEFILE=Makefile MAKEOVERRIDES=
 # MAKEOVERRIDES= effectively "equalizes" GNU-ish and SysV-ish make flavors,
 # which in turn eliminates ambiguities in variable treatment with -e.
@@ -254,9 +289,20 @@ all_testapps: build_libs build_testapps
 build_testapps:
 	@dir=crypto; target=testapps; $(BUILD_ONE_CMD)
 
-libcrypto$(SHLIB_EXT): libcrypto.a
+fips_premain_dso$(EXE_EXT): libcrypto.a
+	[ -z "$(FIPSCANLIB)" ] || $(CC) $(CFLAG) -Iinclude \
+		-DFINGERPRINT_PREMAIN_DSO_LOAD -o $@  \
+		$(FIPSLIBDIR)fips_premain.c $(FIPSLIBDIR)fipscanister.o \
+		libcrypto.a $(EX_LIBS)
+
+libcrypto$(SHLIB_EXT): libcrypto.a fips_premain_dso$(EXE_EXT)
 	@if [ "$(SHLIB_TARGET)" != "" ]; then \
-		$(MAKE) SHLIBDIRS=crypto build-shared; \
+		if [ "$(FIPSCANLIB)" = "libcrypto" ]; then \
+			FIPSLD_LIBCRYPTO=libcrypto.a ; \
+			FIPSLD_CC="$(CC)"; CC=$(FIPSDIR)/bin/fipsld; \
+			export CC FIPSLD_CC FIPSLD_LIBCRYPTO; \
+		fi; \
+		$(MAKE) -e SHLIBDIRS=crypto build-shared; \
 	else \
 		echo "There's no support for shared libraries on this platform" >&2; \
 		exit 1; \
@@ -297,7 +343,7 @@ build-shared: do_$(SHLIB_TARGET) link-shared
 
 do_$(SHLIB_TARGET):
 	@ set -e; libs='-L. $(SHLIBDEPS)'; for i in $(SHLIBDIRS); do \
-		if [ "$(SHLIBDIRS)" = "ssl" -a -n "$(LIBKRB5)" ]; then \
+		if [ "$$i" = "ssl" -a -n "$(LIBKRB5)" ]; then \
 			libs="$(LIBKRB5) $$libs"; \
 		fi; \
 		$(CLEARENV) && $(MAKE) -f Makefile.shared -e $(BUILDENV) \
@@ -311,40 +357,43 @@ do_$(SHLIB_TARGET):
 libcrypto.pc: Makefile
 	@ ( echo 'prefix=$(INSTALLTOP)'; \
 	    echo 'exec_prefix=$${prefix}'; \
-	    echo 'libdir=$${exec_prefix}/lib'; \
+	    echo 'libdir=$${exec_prefix}/$(LIBDIR)'; \
 	    echo 'includedir=$${prefix}/include'; \
 	    echo ''; \
 	    echo 'Name: OpenSSL-libcrypto'; \
 	    echo 'Description: OpenSSL cryptography library'; \
 	    echo 'Version: '$(VERSION); \
 	    echo 'Requires: '; \
-	    echo 'Libs: -L$${libdir} -lcrypto $(EX_LIBS)'; \
+	    echo 'Libs: -L$${libdir} -lcrypto'; \
+	    echo 'Libs.private: $(EX_LIBS)'; \
 	    echo 'Cflags: -I$${includedir} $(KRB5_INCLUDES)' ) > libcrypto.pc
 
 libssl.pc: Makefile
 	@ ( echo 'prefix=$(INSTALLTOP)'; \
 	    echo 'exec_prefix=$${prefix}'; \
-	    echo 'libdir=$${exec_prefix}/lib'; \
+	    echo 'libdir=$${exec_prefix}/$(LIBDIR)'; \
 	    echo 'includedir=$${prefix}/include'; \
 	    echo ''; \
 	    echo 'Name: OpenSSL'; \
 	    echo 'Description: Secure Sockets Layer and cryptography libraries'; \
 	    echo 'Version: '$(VERSION); \
 	    echo 'Requires: '; \
-	    echo 'Libs: -L$${libdir} -lssl -lcrypto $(EX_LIBS)'; \
+	    echo 'Libs: -L$${libdir} -lssl -lcrypto'; \
+	    echo 'Libs.private: $(EX_LIBS)'; \
 	    echo 'Cflags: -I$${includedir} $(KRB5_INCLUDES)' ) > libssl.pc
 
 openssl.pc: Makefile
 	@ ( echo 'prefix=$(INSTALLTOP)'; \
 	    echo 'exec_prefix=$${prefix}'; \
-	    echo 'libdir=$${exec_prefix}/lib'; \
+	    echo 'libdir=$${exec_prefix}/$(LIBDIR)'; \
 	    echo 'includedir=$${prefix}/include'; \
 	    echo ''; \
 	    echo 'Name: OpenSSL'; \
 	    echo 'Description: Secure Sockets Layer and cryptography libraries and tools'; \
 	    echo 'Version: '$(VERSION); \
 	    echo 'Requires: '; \
-	    echo 'Libs: -L$${libdir} -lssl -lcrypto $(EX_LIBS)'; \
+	    echo 'Libs: -L$${libdir} -lssl -lcrypto'; \
+	    echo 'Libs.private: $(EX_LIBS)'; \
 	    echo 'Cflags: -I$${includedir} $(KRB5_INCLUDES)' ) > openssl.pc
 
 Makefile: Makefile.org Configure config
@@ -353,7 +402,7 @@ Makefile: Makefile.org Configure config
 	@false
 
 libclean:
-	rm -f *.map *.so *.so.* *.dll engines/*.so engines/*.dll *.a engines/*.a */lib */*/lib
+	rm -f *.map *.so *.so.* *.dylib *.dll engines/*.so engines/*.dll engines/*.dylib *.a engines/*.a */lib */*/lib
 
 clean:	libclean
 	rm -f shlib/*.o *.o core a.out fluff rehash.time testlog make.log cctest cctest.c
@@ -390,7 +439,7 @@ dclean:
 
 rehash: rehash.time
 rehash.time: certs apps
-	@if [ -z "$(CROSS_COMPILE_PREFIX)" ]; then \
+	@if [ -z "$(CROSS_COMPILE)" ]; then \
 		(OPENSSL="`pwd`/util/opensslwrap.sh"; \
 		[ -x "apps/openssl.exe" ] && OPENSSL="apps/openssl.exe" || :; \
 		OPENSSL_DEBUG_MEMORY=on; \
@@ -403,8 +452,8 @@ test:   tests
 
 tests: rehash
 	@(cd test && echo "testing..." && \
-	$(CLEARENV) && $(MAKE) -e $(BUILDENV) TOP=.. TESTS='$(TESTS)' OPENSSL_DEBUG_MEMORY=on tests );
-	util/opensslwrap.sh version -a
+	$(CLEARENV) && $(MAKE) -e $(BUILDENV) TOP=.. TESTS='$(TESTS)' OPENSSL_DEBUG_MEMORY=on OPENSSL_CONF=../apps/openssl.cnf tests );
+	OPENSSL_CONF=apps/openssl.cnf util/opensslwrap.sh version -a
 
 report:
 	@$(PERL) util/selftest.pl
@@ -420,9 +469,9 @@ tags:
 	find . -name '[^.]*.[ch]' | xargs etags -a
 
 errors:
+	$(PERL) util/ck_errf.pl -strict */*.c */*/*.c
 	$(PERL) util/mkerr.pl -recurse -write
 	(cd engines; $(MAKE) PERL=$(PERL) errors)
-	$(PERL) util/ck_errf.pl */*.c */*/*.c
 
 stacks:
 	$(PERL) util/mkstack.pl -write
@@ -492,9 +541,9 @@ install: all install_docs install_sw
 
 install_sw:
 	@$(PERL) $(TOP)/util/mkdir-p.pl $(INSTALL_PREFIX)$(INSTALLTOP)/bin \
-		$(INSTALL_PREFIX)$(INSTALLTOP)/lib \
-		$(INSTALL_PREFIX)$(INSTALLTOP)/lib/engines \
-		$(INSTALL_PREFIX)$(INSTALLTOP)/lib/pkgconfig \
+		$(INSTALL_PREFIX)$(INSTALLTOP)/$(LIBDIR) \
+		$(INSTALL_PREFIX)$(INSTALLTOP)/$(LIBDIR)/engines \
+		$(INSTALL_PREFIX)$(INSTALLTOP)/$(LIBDIR)/pkgconfig \
 		$(INSTALL_PREFIX)$(INSTALLTOP)/include/openssl \
 		$(INSTALL_PREFIX)$(OPENSSLDIR)/misc \
 		$(INSTALL_PREFIX)$(OPENSSLDIR)/certs \
@@ -505,14 +554,14 @@ install_sw:
 	chmod 644 $(INSTALL_PREFIX)$(INSTALLTOP)/include/openssl/$$i ); \
 	done;
 	@set -e; target=install; $(RECURSIVE_BUILD_CMD)
-	@set -e; for i in $(LIBS) ;\
+	@set -e; liblist="$(LIBS)"; for i in $$liblist ;\
 	do \
 		if [ -f "$$i" ]; then \
 		(       echo installing $$i; \
-			cp $$i $(INSTALL_PREFIX)$(INSTALLTOP)/lib/$$i.new; \
-			$(RANLIB) $(INSTALL_PREFIX)$(INSTALLTOP)/lib/$$i.new; \
-			chmod 644 $(INSTALL_PREFIX)$(INSTALLTOP)/lib/$$i.new; \
-			mv -f $(INSTALL_PREFIX)$(INSTALLTOP)/lib/$$i.new $(INSTALL_PREFIX)$(INSTALLTOP)/lib/$$i ); \
+			cp $$i $(INSTALL_PREFIX)$(INSTALLTOP)/$(LIBDIR)/$$i.new; \
+			$(RANLIB) $(INSTALL_PREFIX)$(INSTALLTOP)/$(LIBDIR)/$$i.new; \
+			chmod 644 $(INSTALL_PREFIX)$(INSTALLTOP)/$(LIBDIR)/$$i.new; \
+			mv -f $(INSTALL_PREFIX)$(INSTALLTOP)/$(LIBDIR)/$$i.new $(INSTALL_PREFIX)$(INSTALLTOP)/$(LIBDIR)/$$i ); \
 		fi; \
 	done;
 	@set -e; if [ -n "$(SHARED_LIBS)" ]; then \
@@ -522,17 +571,17 @@ install_sw:
 			if [ -f "$$i" -o -f "$$i.a" ]; then \
 			(       echo installing $$i; \
 				if [ "$(PLATFORM)" != "Cygwin" ]; then \
-					cp $$i $(INSTALL_PREFIX)$(INSTALLTOP)/lib/$$i.new; \
-					chmod 555 $(INSTALL_PREFIX)$(INSTALLTOP)/lib/$$i.new; \
-					mv -f $(INSTALL_PREFIX)$(INSTALLTOP)/lib/$$i.new $(INSTALL_PREFIX)$(INSTALLTOP)/lib/$$i; \
+					cp $$i $(INSTALL_PREFIX)$(INSTALLTOP)/$(LIBDIR)/$$i.new; \
+					chmod 555 $(INSTALL_PREFIX)$(INSTALLTOP)/$(LIBDIR)/$$i.new; \
+					mv -f $(INSTALL_PREFIX)$(INSTALLTOP)/$(LIBDIR)/$$i.new $(INSTALL_PREFIX)$(INSTALLTOP)/$(LIBDIR)/$$i; \
 				else \
 					c=`echo $$i | sed 's/^lib\(.*\)\.dll\.a/cyg\1-$(SHLIB_VERSION_NUMBER).dll/'`; \
 					cp $$c $(INSTALL_PREFIX)$(INSTALLTOP)/bin/$$c.new; \
 					chmod 755 $(INSTALL_PREFIX)$(INSTALLTOP)/bin/$$c.new; \
 					mv -f $(INSTALL_PREFIX)$(INSTALLTOP)/bin/$$c.new $(INSTALL_PREFIX)$(INSTALLTOP)/bin/$$c; \
-					cp $$i $(INSTALL_PREFIX)$(INSTALLTOP)/lib/$$i.new; \
-					chmod 644 $(INSTALL_PREFIX)$(INSTALLTOP)/lib/$$i.new; \
-					mv -f $(INSTALL_PREFIX)$(INSTALLTOP)/lib/$$i.new $(INSTALL_PREFIX)$(INSTALLTOP)/lib/$$i; \
+					cp $$i $(INSTALL_PREFIX)$(INSTALLTOP)/$(LIBDIR)/$$i.new; \
+					chmod 644 $(INSTALL_PREFIX)$(INSTALLTOP)/$(LIBDIR)/$$i.new; \
+					mv -f $(INSTALL_PREFIX)$(INSTALLTOP)/$(LIBDIR)/$$i.new $(INSTALL_PREFIX)$(INSTALLTOP)/$(LIBDIR)/$$i; \
 				fi ); \
 				if expr $(PLATFORM) : 'mingw' > /dev/null; then \
 				(	case $$i in \
@@ -547,7 +596,7 @@ install_sw:
 			fi; \
 		done; \
 		(	here="`pwd`"; \
-			cd $(INSTALL_PREFIX)$(INSTALLTOP)/lib; \
+			cd $(INSTALL_PREFIX)$(INSTALLTOP)/$(LIBDIR); \
 			$(MAKE) -f $$here/Makefile HERE="$$here" link-shared ); \
 		if [ "$(INSTALLTOP)" != "/usr" ]; then \
 			echo 'OpenSSL shared libraries have been installed in:'; \
@@ -556,12 +605,12 @@ install_sw:
 			sed -e '1,/^$$/d' doc/openssl-shared.txt; \
 		fi; \
 	fi
-	cp libcrypto.pc $(INSTALL_PREFIX)$(INSTALLTOP)/lib/pkgconfig
-	chmod 644 $(INSTALL_PREFIX)$(INSTALLTOP)/lib/pkgconfig/libcrypto.pc
-	cp libssl.pc $(INSTALL_PREFIX)$(INSTALLTOP)/lib/pkgconfig
-	chmod 644 $(INSTALL_PREFIX)$(INSTALLTOP)/lib/pkgconfig/libssl.pc
-	cp openssl.pc $(INSTALL_PREFIX)$(INSTALLTOP)/lib/pkgconfig
-	chmod 644 $(INSTALL_PREFIX)$(INSTALLTOP)/lib/pkgconfig/openssl.pc
+	cp libcrypto.pc $(INSTALL_PREFIX)$(INSTALLTOP)/$(LIBDIR)/pkgconfig
+	chmod 644 $(INSTALL_PREFIX)$(INSTALLTOP)/$(LIBDIR)/pkgconfig/libcrypto.pc
+	cp libssl.pc $(INSTALL_PREFIX)$(INSTALLTOP)/$(LIBDIR)/pkgconfig
+	chmod 644 $(INSTALL_PREFIX)$(INSTALLTOP)/$(LIBDIR)/pkgconfig/libssl.pc
+	cp openssl.pc $(INSTALL_PREFIX)$(INSTALLTOP)/$(LIBDIR)/pkgconfig
+	chmod 644 $(INSTALL_PREFIX)$(INSTALLTOP)/$(LIBDIR)/pkgconfig/openssl.pc
 
 install_html_docs:
 	here="`pwd`"; \
@@ -579,7 +628,7 @@ install_html_docs:
 				grep -v $$filecase "^$$fn\$$" | \
 				(cd $(INSTALL_PREFIX)$(HTMLDIR)/$$subdir; \
 				 while read n; do \
-					$$here/util/point.sh $$fn.$(HTMLSUFFIX) "$$n".$(HTMLSUFFIX); \
+					PLATFORM=$(PLATFORM) $$here/util/point.sh $$fn.$(HTMLSUFFIX) "$$n".$(HTMLSUFFIX); \
 				 done); \
 		done; \
 	done
@@ -590,7 +639,7 @@ install_docs:
 		$(INSTALL_PREFIX)$(MANDIR)/man3 \
 		$(INSTALL_PREFIX)$(MANDIR)/man5 \
 		$(INSTALL_PREFIX)$(MANDIR)/man7
-	@pod2man="`cd util; ./pod2mantest $(PERL)`"; \
+	@pod2man="`cd ./util; ./pod2mantest $(PERL)`"; \
 	here="`pwd`"; \
 	filecase=; \
 	if [ "$(PLATFORM)" = "DJGPP" -o "$(PLATFORM)" = "Cygwin" -o "$(PLATFORM)" = "mingw" ]; then \
@@ -610,7 +659,7 @@ install_docs:
 			(grep -v "[	]"; true) | \
 			(cd $(INSTALL_PREFIX)$(MANDIR)/man$$sec/; \
 			 while read n; do \
-				$$here/util/point.sh $$fn.$${sec}$(MANSUFFIX) "$$n".$${sec}$(MANSUFFIX); \
+				PLATFORM=$(PLATFORM) $$here/util/point.sh $$fn.$${sec}$(MANSUFFIX) "$$n".$${sec}$(MANSUFFIX); \
 			 done); \
 	done; \
 	set -e; for i in doc/crypto/*.pod doc/ssl/*.pod; do \
@@ -627,7 +676,7 @@ install_docs:
 			(grep -v "[	]"; true) | \
 			(cd $(INSTALL_PREFIX)$(MANDIR)/man$$sec/; \
 			 while read n; do \
-				$$here/util/point.sh $$fn.$${sec}$(MANSUFFIX) "$$n".$${sec}$(MANSUFFIX); \
+				PLATFORM=$(PLATFORM) $$here/util/point.sh $$fn.$${sec}$(MANSUFFIX) "$$n".$${sec}$(MANSUFFIX); \
 			 done); \
 	done
 

Makefile.shared

@@ -135,7 +135,7 @@ LINK_SO_A_VIA_O=	\
   ALL=$$ALLSYMSFLAGS; ALLSYMSFLAGS=; NOALLSYMSFLAGS=; \
   ( $(SET_X); \
     ld $(LDFLAGS) -r -o lib$(LIBNAME).o $$ALL lib$(LIBNAME).a $(LIBEXTRAS) ); \
-  $(LINK_SO) && rm -f $(LIBNAME).o
+  $(LINK_SO) && rm -f lib$(LIBNAME).o
 
 LINK_SO_A_UNPACKED=	\
   UNPACKDIR=link_tmp.$$$$; rm -rf $$UNPACKDIR; mkdir $$UNPACKDIR; \
@@ -207,17 +207,29 @@ link_app.bsd:
 	fi; $(LINK_APP)
 
 # For Darwin AKA Mac OS/X (dyld)
-# link_o.darwin produces .so, because we let it use dso_dlfcn module,
-# which has .so extension hard-coded. One can argue that one should
-# develop special dso module for MacOS X. At least manual encourages
-# to use native NSModule(3) API and refers to dlfcn as termporary hack.
+# Originally link_o.darwin produced .so, because it was hard-coded
+# in dso_dlfcn module. At later point dso_dlfcn switched to .dylib
+# extension in order to allow for run-time linking with vendor-
+# supplied shared libraries such as libz, so that link_o.darwin had
+# to be harmonized with it. This caused minor controversy, because
+# it was believed that dlopen can't be used to dynamically load
+# .dylib-s, only so called bundle modules (ones linked with -bundle
+# flag). The belief seems to be originating from pre-10.4 release,
+# where dlfcn functionality was emulated by dlcompat add-on. In
+# 10.4 dlopen was rewritten as native part of dyld and is documented
+# to be capable of loading both dynamic libraries and bundles. In
+# order to provide compatibility with pre-10.4 dlopen, modules are
+# linked with -bundle flag, which makes .dylib extension misleading.
+# It works, because dlopen is [and always was] extension-agnostic.
+# Alternative to this heuristic approach is to develop specific
+# MacOS X dso module relying on whichever "native" dyld interface.
 link_o.darwin:
 	@ $(CALC_VERSIONS); \
 	SHLIB=lib$(LIBNAME); \
-	SHLIB_SUFFIX=.so; \
+	SHLIB_SUFFIX=.dylib; \
 	ALLSYMSFLAGS='-all_load'; \
 	NOALLSYMSFLAGS=''; \
-	SHAREDFLAGS="$(CFLAGS) $(SHARED_LDFLAGS)"; \
+	SHAREDFLAGS="$(CFLAGS) `echo $(SHARED_LDFLAGS) | sed s/dynamiclib/bundle/`"; \
 	if [ -n "$(LIBVERSION)" ]; then \
 		SHAREDFLAGS="$$SHAREDFLAGS -current_version $(LIBVERSION)"; \
 	fi; \
@@ -238,7 +250,7 @@ link_a.darwin:
 	if [ -n "$$SHLIB_SOVER_NODOT" ]; then \
 		SHAREDFLAGS="$$SHAREDFLAGS -compatibility_version $$SHLIB_SOVER_NODOT"; \
 	fi; \
-	SHAREDFLAGS="$$SHAREDFLAGS -install_name $(INSTALLTOP)/lib/$$SHLIB$(SHLIB_EXT)"; \
+	SHAREDFLAGS="$$SHAREDFLAGS -install_name $(INSTALLTOP)/$(LIBDIR)/$$SHLIB$(SHLIB_EXT)"; \
 	$(LINK_SO_A)
 link_app.darwin:	# is there run-path on darwin?
 	$(LINK_APP)
@@ -281,7 +293,7 @@ link_a.cygwin:
 	fi; \
 	dll_name=$$SHLIB$$SHLIB_SOVER$$SHLIB_SUFFIX; \
 	$(PERL) util/mkrc.pl $$dll_name | \
-		$(CROSS_COMPILE_PREFIX)windres -o rc.o; \
+		$(CROSS_COMPILE)windres -o rc.o; \
 	extras="$$extras rc.o"; \
 	ALLSYMSFLAGS='-Wl,--whole-archive'; \
 	NOALLSYMSFLAGS='-Wl,--no-whole-archive'; \

NEWS

@@ -5,8 +5,170 @@
   This file gives a brief overview of the major changes between each OpenSSL
   release. For more details please read the CHANGES file.
 
+  Major changes between OpenSSL 1.0.1b and OpenSSL 1.0.1c:
+
+      o Fix TLS/DTLS record length checking bug CVE-2012-2333
+      o Don't attempt to use non-FIPS composite ciphers in FIPS mode.
+
+  Major changes between OpenSSL 1.0.1a and OpenSSL 1.0.1b:
+
+      o Fix compilation error on non-x86 platforms.
+      o Make FIPS capable OpenSSL ciphers work in non-FIPS mode.
+      o Fix SSL_OP_NO_TLSv1_1 clash with SSL_OP_ALL in OpenSSL 1.0.0
+
+  Major changes between OpenSSL 1.0.1 and OpenSSL 1.0.1a:
+
+      o Fix for ASN1 overflow bug CVE-2012-2110
+      o Workarounds for some servers that hang on long client hellos.
+      o Fix SEGV in AES code.
+
+  Major changes between OpenSSL 1.0.0h and OpenSSL 1.0.1:
+
+      o TLS/DTLS heartbeat support.
+      o SCTP support.
+      o RFC 5705 TLS key material exporter.
+      o RFC 5764 DTLS-SRTP negotiation.
+      o Next Protocol Negotiation.
+      o PSS signatures in certificates, requests and CRLs.
+      o Support for password based recipient info for CMS.
+      o Support TLS v1.2 and TLS v1.1.
+      o Preliminary FIPS capability for unvalidated 2.0 FIPS module.
+      o SRP support.
+
+  Major changes between OpenSSL 1.0.0g and OpenSSL 1.0.0h:
+
+      o Fix for CMS/PKCS#7 MMA CVE-2012-0884
+      o Corrected fix for CVE-2011-4619
+      o Various DTLS fixes.
+
+  Major changes between OpenSSL 1.0.0f and OpenSSL 1.0.0g:
+
+      o Fix for DTLS DoS issue CVE-2012-0050
+
+  Major changes between OpenSSL 1.0.0e and OpenSSL 1.0.0f:
+
+      o Fix for DTLS plaintext recovery attack CVE-2011-4108
+      o Clear block padding bytes of SSL 3.0 records CVE-2011-4576
+      o Only allow one SGC handshake restart for SSL/TLS CVE-2011-4619
+      o Check parameters are not NULL in GOST ENGINE CVE-2012-0027
+      o Check for malformed RFC3779 data CVE-2011-4577
+
+  Major changes between OpenSSL 1.0.0d and OpenSSL 1.0.0e:
+
+      o Fix for CRL vulnerability issue CVE-2011-3207
+      o Fix for ECDH crashes CVE-2011-3210
+      o Protection against EC timing attacks.
+      o Support ECDH ciphersuites for certificates using SHA2 algorithms.
+      o Various DTLS fixes.
+
+  Major changes between OpenSSL 1.0.0c and OpenSSL 1.0.0d:
+
+      o Fix for security issue CVE-2011-0014
+
+  Major changes between OpenSSL 1.0.0b and OpenSSL 1.0.0c:
+
+      o Fix for security issue CVE-2010-4180
+      o Fix for CVE-2010-4252
+      o Fix mishandling of absent EC point format extension.
+      o Fix various platform compilation issues.
+      o Corrected fix for security issue CVE-2010-3864.
+
+  Major changes between OpenSSL 1.0.0a and OpenSSL 1.0.0b:
+
+      o Fix for security issue CVE-2010-3864.
+      o Fix for CVE-2010-2939
+      o Fix WIN32 build system for GOST ENGINE.
+
+  Major changes between OpenSSL 1.0.0 and OpenSSL 1.0.0a:
+
+      o Fix for security issue CVE-2010-1633.
+      o GOST MAC and CFB fixes.
+
+  Major changes between OpenSSL 0.9.8n and OpenSSL 1.0.0:
+
+      o RFC3280 path validation: sufficient to process PKITS tests.
+      o Integrated support for PVK files and keyblobs.
+      o Change default private key format to PKCS#8.
+      o CMS support: able to process all examples in RFC4134
+      o Streaming ASN1 encode support for PKCS#7 and CMS.
+      o Multiple signer and signer add support for PKCS#7 and CMS.
+      o ASN1 printing support.
+      o Whirlpool hash algorithm added.
+      o RFC3161 time stamp support.
+      o New generalised public key API supporting ENGINE based algorithms.
+      o New generalised public key API utilities.
+      o New ENGINE supporting GOST algorithms.
+      o SSL/TLS GOST ciphersuite support.
+      o PKCS#7 and CMS GOST support.
+      o RFC4279 PSK ciphersuite support.
+      o Supported points format extension for ECC ciphersuites.
+      o ecdsa-with-SHA224/256/384/512 signature types.
+      o dsa-with-SHA224 and dsa-with-SHA256 signature types.
+      o Opaque PRF Input TLS extension support.
+      o Updated time routines to avoid OS limitations.
+
+  Major changes between OpenSSL 0.9.8q and OpenSSL 0.9.8r:
+
+      o Fix for security issue CVE-2011-0014
+
+  Major changes between OpenSSL 0.9.8p and OpenSSL 0.9.8q:
+
+      o Fix for security issue CVE-2010-4180
+      o Fix for CVE-2010-4252
+
+  Major changes between OpenSSL 0.9.8o and OpenSSL 0.9.8p:
+
+      o Fix for security issue CVE-2010-3864.
+
+  Major changes between OpenSSL 0.9.8n and OpenSSL 0.9.8o:
+
+      o Fix for security issue CVE-2010-0742.
+      o Various DTLS fixes.
+      o Recognise SHA2 certificates if only SSL algorithms added.
+      o Fix for no-rc4 compilation.
+      o Chil ENGINE unload workaround.
+
+  Major changes between OpenSSL 0.9.8m and OpenSSL 0.9.8n:
+
+      o CFB cipher definition fixes.
+      o Fix security issues CVE-2010-0740 and CVE-2010-0433.
+
+  Major changes between OpenSSL 0.9.8l and OpenSSL 0.9.8m:
+
+      o Cipher definition fixes.
+      o Workaround for slow RAND_poll() on some WIN32 versions.
+      o Remove MD2 from algorithm tables.
+      o SPKAC handling fixes.
+      o Support for RFC5746 TLS renegotiation extension.
+      o Compression memory leak fixed.
+      o Compression session resumption fixed.
+      o Ticket and SNI coexistence fixes.
+      o Many fixes to DTLS handling. 
+
+  Major changes between OpenSSL 0.9.8k and OpenSSL 0.9.8l:
+
+      o Temporary work around for CVE-2009-3555: disable renegotiation.
+
+  Major changes between OpenSSL 0.9.8j and OpenSSL 0.9.8k:
+
+      o Fix various build issues.
+      o Fix security issues (CVE-2009-0590, CVE-2009-0591, CVE-2009-0789)
+
+  Major changes between OpenSSL 0.9.8i and OpenSSL 0.9.8j:
+
+      o Fix security issue (CVE-2008-5077)
+      o Merge FIPS 140-2 branch code.
+
+  Major changes between OpenSSL 0.9.8g and OpenSSL 0.9.8h:
+
+      o CryptoAPI ENGINE support.
+      o Various precautionary measures.
+      o Fix for bugs affecting certificate request creation.
+      o Support for local machine keyset attribute in PKCS#12 files.
+
   Major changes between OpenSSL 0.9.8f and OpenSSL 0.9.8g:
 
+      o Backport of CMS functionality to 0.9.8.
       o Fixes for bugs introduced with 0.9.8f.
 
   Major changes between OpenSSL 0.9.8e and OpenSSL 0.9.8f:

PROBLEMS

@@ -36,7 +36,9 @@ may differ on your machine.
 
 
 As long as Apple doesn't fix the problem with ld, this problem building
-OpenSSL will remain as is.
+OpenSSL will remain as is. Well, the problem was addressed in 0.9.8f by
+passing -Wl,-search_paths_first, but it's unknown if the flag was
+supported from the initial MacOS X release.
 
 
 * Parallell make leads to errors

README

@@ -1,7 +1,7 @@
 
- OpenSSL 0.9.9-dev XX xxx XXXX
+ OpenSSL 1.0.1c 10 May 2012
 
- Copyright (c) 1998-2008 The OpenSSL Project
+ Copyright (c) 1998-2011 The OpenSSL Project
  Copyright (c) 1995-1998 Eric A. Young, Tim J. Hudson
  All rights reserved.
 
@@ -112,8 +112,6 @@
  should be contacted if that algorithm is to be used; their web page is
  http://www.ascom.ch/.
 
- The MDC2 algorithm is patented by IBM.
-
  NTT and Mitsubishi have patents and pending patents on the Camellia
  algorithm, but allow use at no charge without requiring an explicit
  licensing agreement: http://info.isl.ntt.co.jp/crypt/eng/info/chiteki.html
@@ -139,6 +137,9 @@
  SUPPORT
  -------
 
+ See the OpenSSL website www.openssl.org for details of how to obtain
+ commercial technical support.
+
  If you have any problems with OpenSSL then please take the following steps
  first:
 
@@ -165,6 +166,10 @@
 
     openssl-bugs@openssl.org
 
+ Note that the request tracker should NOT be used for general assistance
+ or support queries. Just because something doesn't work the way you expect
+ does not mean it is necessarily a bug in OpenSSL.
+
  Note that mail to openssl-bugs@openssl.org is recorded in the publicly
  readable request tracker database and is forwarded to a public
  mailing list. Confidential mail may be sent to openssl-security@openssl.org
@@ -175,10 +180,22 @@
 
  Development is coordinated on the openssl-dev mailing list (see
  http://www.openssl.org for information on subscribing). If you
- would like to submit a patch, send it to openssl-dev@openssl.org with
+ would like to submit a patch, send it to openssl-bugs@openssl.org with
  the string "[PATCH]" in the subject. Please be sure to include a
  textual explanation of what your patch does.
 
+ If you are unsure as to whether a feature will be useful for the general
+ OpenSSL community please discuss it on the openssl-dev mailing list first.
+ Someone may be already working on the same thing or there may be a good
+ reason as to why that feature isn't implemented.
+
+ Patches should be as up to date as possible, preferably relative to the
+ current CVS or the last snapshot. They should follow the coding style of
+ OpenSSL and compile without warnings. Some of the core team developer targets
+ can be used for testing purposes, (debug-steve64, debug-geoff etc). OpenSSL
+ compiles on many varied platforms: try to ensure you only use portable
+ features.
+
  Note: For legal reasons, contributions from the US can be accepted only
  if a TSU notification and a copy of the patch are sent to crypt@bis.doc.gov
  (formerly BXA) with a copy to the ENC Encryption Request Coordinator;

STATUS

@@ -1,10 +1,36 @@
 
   OpenSSL STATUS                           Last modified at
-  ______________                           $Date: 2008/05/28 22:30:28 $
+  ______________                           $Date: 2012/05/10 15:16:36 $
 
   DEVELOPMENT STATE
 
-    o  OpenSSL 0.9.9:  Under development...
+    o  OpenSSL 1.1.0:  Under development...
+    o  OpenSSL 1.0.1c: Released on May       10th, 2012
+    o  OpenSSL 1.0.1b: Released on April     26th, 2012
+    o  OpenSSL 1.0.1a: Released on April     19th, 2012
+    o  OpenSSL 1.0.1:  Released on March     14th, 2012
+    o  OpenSSL 1.0.0h: Released on March     12th, 2012
+    o  OpenSSL 1.0.0g: Released on January   18th, 2012
+    o  OpenSSL 1.0.0f: Released on January    4th, 2012
+    o  OpenSSL 1.0.0e: Released on September  6th, 2011
+    o  OpenSSL 1.0.0d: Released on February   8nd, 2011
+    o  OpenSSL 1.0.0c: Released on December   2nd, 2010
+    o  OpenSSL 1.0.0b: Released on November  16th, 2010
+    o  OpenSSL 1.0.0a: Released on June      1st,  2010
+    o  OpenSSL 1.0.0:  Released on March     29th, 2010
+    o  OpenSSL 0.9.8u: Released on March     12th, 2012
+    o  OpenSSL 0.9.8t: Released on January   18th, 2012
+    o  OpenSSL 0.9.8s: Released on January    4th, 2012
+    o  OpenSSL 0.9.8r: Released on February   8nd, 2011
+    o  OpenSSL 0.9.8q: Released on December   2nd, 2010
+    o  OpenSSL 0.9.8p: Released on November  16th, 2010
+    o  OpenSSL 0.9.8o: Released on June       1st, 2010
+    o  OpenSSL 0.9.8n: Released on March     24th, 2010
+    o  OpenSSL 0.9.8m: Released on February  25th, 2010
+    o  OpenSSL 0.9.8l: Released on November   5th, 2009
+    o  OpenSSL 0.9.8k: Released on March     25th, 2009
+    o  OpenSSL 0.9.8j: Released on January    7th, 2009
+    o  OpenSSL 0.9.8i: Released on September 15th, 2008
     o  OpenSSL 0.9.8h: Released on May       28th, 2008
     o  OpenSSL 0.9.8g: Released on October   19th, 2007
     o  OpenSSL 0.9.8f: Released on October   11th, 2007

VMS/install-vms.com

@@ -0,0 +1,67 @@
+$! install-vms.com -- Installs the files in a given directory tree
+$!
+$! Author: Richard Levitte <richard@levitte.org>
+$! Time of creation: 23-MAY-1998 19:22
+$!
+$! P1	root of the directory tree
+$!
+$!
+$! Announce/identify.
+$!
+$ proc = f$environment( "procedure")
+$ write sys$output "@@@ "+ -
+   f$parse( proc, , , "name")+ f$parse( proc, , , "type")
+$!
+$ on error then goto tidy
+$ on control_c then goto tidy
+$!
+$ if p1 .eqs. ""
+$ then
+$   write sys$output "First argument missing."
+$   write sys$output -
+     "Should be the directory where you want things installed."
+$   exit
+$ endif
+$
+$ if (f$getsyi( "cpu") .lt. 128)
+$ then
+$   arch = "VAX"
+$ else
+$   arch = f$edit( f$getsyi( "arch_name"), "upcase")
+$   if (arch .eqs. "") then arch = "UNK"
+$ endif
+$
+$ root = f$parse( P1, "[]A.;0", , , "SYNTAX_ONLY, NO_CONCEAL")- "A.;0"
+$ root_dev = f$parse( root, , , "device", "syntax_only")
+$ root_dir = f$parse( root, , , "directory", "syntax_only") - -
+   "[000000." - "][" - "[" - "]"
+$ root = root_dev + "[" + root_dir
+$
+$ define /nolog wrk_sslroot 'root'.] /translation_attributes = concealed
+$ define /nolog wrk_sslinclude wrk_sslroot:[include]
+$
+$ if f$parse( "wrk_sslroot:[000000]") .eqs. "" then -
+   create /directory /log wrk_sslroot:[000000]
+$ if f$parse( "wrk_sslinclude:") .eqs. "" then -
+   create /directory /log wrk_sslinclude:
+$ if f$parse( "wrk_sslroot:[vms]") .eqs. "" then -
+   create /directory /log wrk_sslroot:[vms]
+$!
+$ copy /log /protection = world:re openssl_startup.com wrk_sslroot:[vms]
+$ copy /log /protection = world:re openssl_undo.com wrk_sslroot:[vms]
+$ copy /log /protection = world:re openssl_utils.com wrk_sslroot:[vms]
+$!
+$ tidy:
+$!
+$ call deass wrk_sslroot
+$ call deass wrk_sslinclude
+$!
+$ exit
+$!
+$ deass: subroutine
+$ if (f$trnlnm( p1, "LNM$PROCESS") .nes. "")
+$ then
+$   deassign /process 'p1'
+$ endif
+$ endsubroutine
+$!

VMS/install.com

@@ -1,72 +0,0 @@
-$! INSTALL.COM -- Installs the files in a given directory tree
-$!
-$! Author: Richard Levitte <richard@levitte.org>
-$! Time of creation: 23-MAY-1998 19:22
-$!
-$! P1	root of the directory tree
-$!
-$	IF P1 .EQS. ""
-$	THEN
-$	    WRITE SYS$OUTPUT "First argument missing."
-$	    WRITE SYS$OUTPUT "Should be the directory where you want things installed."
-$	    EXIT
-$	ENDIF
-$
-$	ROOT = F$PARSE(P1,"[]A.;0",,,"SYNTAX_ONLY,NO_CONCEAL") - "A.;0"
-$	ROOT_DEV = F$PARSE(ROOT,,,"DEVICE","SYNTAX_ONLY")
-$	ROOT_DIR = F$PARSE(ROOT,,,"DIRECTORY","SYNTAX_ONLY") -
-		   - "[000000." - "][" - "[" - "]"
-$	ROOT = ROOT_DEV + "[" + ROOT_DIR
-$
-$	DEFINE/NOLOG WRK_SSLROOT 'ROOT'.] /TRANS=CONC
-$	DEFINE/NOLOG WRK_SSLVLIB WRK_SSLROOT:[VAX_LIB]
-$	DEFINE/NOLOG WRK_SSLALIB WRK_SSLROOT:[ALPHA_LIB]
-$	DEFINE/NOLOG WRK_SSLINCLUDE WRK_SSLROOT:[INCLUDE]
-$	DEFINE/NOLOG WRK_SSLVEXE WRK_SSLROOT:[VAX_EXE]
-$	DEFINE/NOLOG WRK_SSLAEXE WRK_SSLROOT:[ALPHA_EXE]
-$	DEFINE/NOLOG WRK_SSLCERTS WRK_SSLROOT:[CERTS]
-$	DEFINE/NOLOG WRK_SSLPRIVATE WRK_SSLROOT:[PRIVATE]
-$
-$	IF F$PARSE("WRK_SSLROOT:[000000]") .EQS. "" THEN -
-	   CREATE/DIR/LOG WRK_SSLROOT:[000000]
-$	IF F$PARSE("WRK_SSLINCLUDE:") .EQS. "" THEN -
-	   CREATE/DIR/LOG WRK_SSLINCLUDE:
-$	IF F$PARSE("WRK_SSLROOT:[VMS]") .EQS. "" THEN -
-	   CREATE/DIR/LOG WRK_SSLROOT:[VMS]
-$
-$	IF F$SEARCH("WRK_SSLINCLUDE:vms_idhacks.h") .NES. "" THEN -
-	   DELETE WRK_SSLINCLUDE:vms_idhacks.h;*
-$
-$	OPEN/WRITE SF WRK_SSLROOT:[VMS]OPENSSL_STARTUP.COM
-$	WRITE SYS$OUTPUT "%OPEN-I-CREATED,  ",F$SEARCH("WRK_SSLROOT:[VMS]OPENSSL_STARTUP.COM")," created."
-$	WRITE SF "$! Startup file for Openssl 0.9.2-RL 15-Mar-1999"
-$	WRITE SF "$!"
-$	WRITE SF "$! Do not edit this file, as it will be regenerated during next installation."
-$	WRITE SF "$! Instead, add or change SSLROOT:[VMS]OPENSSL_SYSTARTUP.COM"
-$	WRITE SF "$!"
-$	WRITE SF "$! P1	a qualifier to DEFINE.  For example ""/SYSTEM"" to get the logical names"
-$	WRITE SF "$!	defined in the system logical name table."
-$	WRITE SF "$!"
-$	WRITE SF "$	ARCH = ""VAX"""
-$	WRITE SF "$	IF F$GETSYI(""CPU"") .GE. 128 THEN ARCH = ""ALPHA"""
-$	WRITE SF "$	DEFINE/NOLOG'P1	SSLROOT		",ROOT,".] /TRANS=CONC"
-$	WRITE SF "$	DEFINE/NOLOG'P1	SSLLIB		SSLROOT:['ARCH'_LIB]"
-$	WRITE SF "$	DEFINE/NOLOG'P1	SSLINCLUDE	SSLROOT:[INCLUDE]"
-$	WRITE SF "$	DEFINE/NOLOG'P1	SSLEXE		SSLROOT:['ARCH'_EXE]"
-$	WRITE SF "$	DEFINE/NOLOG'P1	SSLCERTS	SSLROOT:[CERTS]"
-$	WRITE SF "$	DEFINE/NOLOG'P1	SSLPRIVATE	SSLROOT:[PRIVATE]"
-$	WRITE SF "$"
-$	WRITE SF "$!	This is program can include <openssl/{foo}.h>"
-$	WRITE SF "$	DEFINE/NOLOG'P1	OPENSSL		SSLINCLUDE:"
-$	WRITE SF "$"
-$	WRITE SF "$	IF F$SEARCH(""SSLROOT:[VMS]OPENSSL_SYSTARTUP.COM"") .NES."""" THEN -"
-$	WRITE SF "	   @SSLROOT:[VMS]OPENSSL_SYSTARTUP.COM"
-$	WRITE SF "$"
-$	WRITE SF "$	EXIT"
-$	CLOSE SF
-$	SET FILE/PROT=WORLD:RE WRK_SSLROOT:[VMS]OPENSSL_STARTUP.COM
-$
-$	COPY OPENSSL_UTILS.COM WRK_SSLROOT:[VMS]/LOG
-$	SET FILE/PROT=WORLD:RE WRK_SSLROOT:[VMS]OPENSSL_UTILS.COM
-$
-$	EXIT

VMS/mkshared.com

@@ -1,77 +1,168 @@
-$! MKSHARED.COM -- script to created shareable images on VMS
+$! MKSHARED.COM -- Create shareable images.
 $!
-$! No command line parameters.  This should be run at the start of the source
-$! tree (the same directory where one finds INSTALL.VMS).
+$! P1: "64" for 64-bit pointers.
 $!
-$! Input:	[.UTIL]LIBEAY.NUM,[.AXP.EXE.CRYPTO]LIBCRYPTO.OLB
-$!		[.UTIL]SSLEAY.NUM,[.AXP.EXE.SSL]LIBSSL.OLB
-$! Output:	[.AXP.EXE.CRYPTO]LIBCRYPTO.OPT,.MAP,.EXE
-$!		[.AXP.EXE.SSL]LIBSSL.OPT,.MAP,.EXE
+$! P2: Zlib object library path (optional).
+$!
+$! Input:	[.UTIL]LIBEAY.NUM,[.xxx.EXE.CRYPTO]SSL_LIBCRYPTO[32].OLB
+$!		[.UTIL]SSLEAY.NUM,[.xxx.EXE.SSL]SSL_LIBSSL[32].OLB
+$!		[.CRYPTO.xxx]OPENSSLCONF.H
+$! Output:	[.xxx.EXE.CRYPTO]SSL_LIBCRYPTO_SHR[32].OPT,.MAP,.EXE
+$!		[.xxx.EXE.SSL]SSL_LIBSSL_SRH[32].OPT,.MAP,.EXE
 $!
 $! So far, tests have only been made on VMS for Alpha.  VAX will come in time.
 $! ===========================================================================
-$
+$!
+$! Announce/identify.
+$!
+$ proc = f$environment( "procedure")
+$ write sys$output "@@@ "+ -
+   f$parse( proc, , , "name")+ f$parse( proc, , , "type")
+$!
+$! Save the original default device:[directory].
+$!
+$ def_orig = f$environment( "default")
+$ on error then goto tidy
+$ on control_c then goto tidy
+$!
+$! SET DEFAULT to the main kit directory.
+$!
+$ proc = f$environment("procedure")
+$ proc = f$parse( "A.;", proc)- "A.;"
+$ set default 'proc'
+$ set default [-]
+$!
 $! ----- Prepare info for processing: version number and file info
 $ gosub read_version_info
 $ if libver .eqs. ""
 $ then
 $   write sys$error "ERROR: Couldn't find any library version info..."
-$   exit
+$   go to tidy:
 $ endif
 $
-$ if f$getsyi("CPU") .ge. 128
+$ if (f$getsyi("cpu") .lt. 128)
 $ then
-$   libid  = "Crypto"
-$   libnum = "[.UTIL]LIBEAY.NUM"
-$   libdir = "[.AXP.EXE.CRYPTO]"
-$   libolb = "''libdir'LIBCRYPTO.OLB"
-$   libopt = "''libdir'LIBCRYPTO.OPT"
-$   libmap = "''libdir'LIBCRYPTO.MAP"
-$   libgoal= "''libdir'LIBCRYPTO.EXE"
-$   libref = ""
-$   gosub create_axp_shr
-$   libid  = "SSL"
-$   libnum = "[.UTIL]SSLEAY.NUM"
-$   libdir = "[.AXP.EXE.SSL]"
-$   libolb = "''libdir'LIBSSL.OLB"
-$   libopt = "''libdir'LIBSSL.OPT"
-$   libmap = "''libdir'LIBSSL.MAP"
-$   libgoal= "''libdir'LIBSSL.EXE"
-$   libref = "[.AXP.EXE.CRYPTO]LIBCRYPTO.EXE"
-$   gosub create_axp_shr
+$   arch_vax = 1
+$   arch = "VAX"
 $ else
+$   arch_vax = 0
+$   arch = f$edit( f$getsyi( "ARCH_NAME"), "UPCASE")
+$   if (arch .eqs. "") then arch = "UNK"
+$ endif
+$!
+$ archd = arch
+$ lib32 = "32"
+$ shr = "SHR32"
+$!
+$ if (p1 .nes. "")
+$ then
+$   if (p1 .eqs. "64")
+$   then
+$     archd = arch+ "_64"
+$     lib32 = ""
+$     shr = "SHR"
+$   else
+$     if (p1 .nes. "32")
+$     then
+$       write sys$output "Second argument invalid."
+$       write sys$output "It should be "32", "64", or nothing."
+$       exit
+$     endif
+$   endif
+$ endif
+$!
+$! ----- Prepare info for processing: disabled algorithms info
+$ gosub read_disabled_algorithms_info
+$!
+$ ZLIB = p2
+$ zlib_lib = ""
+$ if (ZLIB .nes. "")
+$ then
+$   file2 = f$parse( ZLIB, "libz.olb", , , "syntax_only")
+$   if (f$search( file2) .eqs. "")
+$   then
+$     write sys$output ""
+$     write sys$output "The Option ", ZLIB, " Is Invalid."
+$     write sys$output "    Can't find library: ''file2'"
+$     write sys$output ""
+$     goto tidy
+$   endif
+$   zlib_lib = ", ''file2' /library"
+$ endif
+$!
+$ if (arch_vax)
+$ then
 $   libtit = "CRYPTO_TRANSFER_VECTOR"
 $   libid  = "Crypto"
 $   libnum = "[.UTIL]LIBEAY.NUM"
-$   libdir = "[.VAX.EXE.CRYPTO]"
-$   libmar = "''libdir'LIBCRYPTO.MAR"
-$   libolb = "''libdir'LIBCRYPTO.OLB"
-$   libopt = "''libdir'LIBCRYPTO.OPT"
-$   libobj = "''libdir'LIBCRYPTO.OBJ"
-$   libmap = "''libdir'LIBCRYPTO.MAP"
-$   libgoal= "''libdir'LIBCRYPTO.EXE"
+$   libdir = "[.''ARCHD'.EXE.CRYPTO]"
+$   libmar = "''libdir'SSL_LIBCRYPTO_''shr'.MAR"
+$   libolb = "''libdir'SSL_LIBCRYPTO''lib32'.OLB"
+$   libopt = "''libdir'SSL_LIBCRYPTO_''shr'.OPT"
+$   libobj = "''libdir'SSL_LIBCRYPTO_''shr'.OBJ"
+$   libmap = "''libdir'SSL_LIBCRYPTO_''shr'.MAP"
+$   libgoal= "''libdir'SSL_LIBCRYPTO_''shr'.EXE"
 $   libref = ""
 $   libvec = "LIBCRYPTO"
-$   gosub create_vax_shr
+$   if f$search( libolb) .nes. "" then gosub create_vax_shr
 $   libtit = "SSL_TRANSFER_VECTOR"
 $   libid  = "SSL"
 $   libnum = "[.UTIL]SSLEAY.NUM"
-$   libdir = "[.VAX.EXE.SSL]"
-$   libmar = "''libdir'LIBSSL.MAR"
-$   libolb = "''libdir'LIBSSL.OLB"
-$   libopt = "''libdir'LIBSSL.OPT"
-$   libobj = "''libdir'LIBSSL.OBJ"
-$   libmap = "''libdir'LIBSSL.MAP"
-$   libgoal= "''libdir'LIBSSL.EXE"
-$   libref = "[.VAX.EXE.CRYPTO]LIBCRYPTO.EXE"
+$   libdir = "[.''ARCHD'.EXE.SSL]"
+$   libmar = "''libdir'SSL_LIBSSL_''shr'.MAR"
+$   libolb = "''libdir'SSL_LIBSSL''lib32'.OLB"
+$   libopt = "''libdir'SSL_LIBSSL_''shr'.OPT"
+$   libobj = "''libdir'SSL_LIBSSL_''shr'.OBJ"
+$   libmap = "''libdir'SSL_LIBSSL_''shr'.MAP"
+$   libgoal= "''libdir'SSL_LIBSSL_''shr'.EXE"
+$   libref = "[.''ARCHD'.EXE.CRYPTO]SSL_LIBCRYPTO_''shr'.EXE"
 $   libvec = "LIBSSL"
-$   gosub create_vax_shr
+$   if f$search( libolb) .nes. "" then gosub create_vax_shr
+$ else
+$   libid  = "Crypto"
+$   libnum = "[.UTIL]LIBEAY.NUM"
+$   libdir = "[.''ARCHD'.EXE.CRYPTO]"
+$   libolb = "''libdir'SSL_LIBCRYPTO''lib32'.OLB"
+$   libopt = "''libdir'SSL_LIBCRYPTO_''shr'.OPT"
+$   libmap = "''libdir'SSL_LIBCRYPTO_''shr'.MAP"
+$   libgoal= "''libdir'SSL_LIBCRYPTO_''shr'.EXE"
+$   libref = ""
+$   if f$search( libolb) .nes. "" then gosub create_nonvax_shr
+$   libid  = "SSL"
+$   libnum = "[.UTIL]SSLEAY.NUM"
+$   libdir = "[.''ARCHD'.EXE.SSL]"
+$   libolb = "''libdir'SSL_LIBSSL''lib32'.OLB"
+$   libopt = "''libdir'SSL_LIBSSL_''shr'.OPT"
+$   libmap = "''libdir'SSL_LIBSSL_''shr'.MAP"
+$   libgoal= "''libdir'SSL_LIBSSL_''shr'.EXE"
+$   libref = "[.''ARCHD'.EXE.CRYPTO]SSL_LIBCRYPTO_''shr'.EXE"
+$   if f$search( libolb) .nes. "" then gosub create_nonvax_shr
 $ endif
+$!
+$ tidy:
+$!
+$! Close any open files.
+$!
+$ if (f$trnlnm( "libnum", "LNM$PROCESS", 0, "SUPERVISOR") .nes. "") then -
+   close libnum
+$!
+$ if (f$trnlnm( "mar", "LNM$PROCESS", 0, "SUPERVISOR") .nes. "") then -
+   close mar
+$!
+$ if (f$trnlnm( "opt", "LNM$PROCESS", 0, "SUPERVISOR") .nes. "") then -
+   close opt
+$!
+$ if (f$trnlnm( "vf", "LNM$PROCESS", 0, "SUPERVISOR") .nes. "") then -
+   close vf
+$!
+$! Restore the original default device:[directory].
+$!
+$ set default 'def_orig'
 $ exit
 $
-$! ----- Soubroutines to actually build the shareable libraries
-$! The way things work, there's a main shareable library creator for each
-$! supported architecture, which is called from the main code above.
+$! ----- Subroutines to build the shareable libraries
+$! For each supported architecture, there's a main shareable library
+$! creator, which is called from the main code above.
 $! The creator will define a number of variables to tell the next levels of
 $! subroutines what routines to use to write to the option files, call the
 $! main processor, read_func_num, and when that is done, it will write version
@@ -97,28 +188,29 @@ $! read_func_num depends on the following variables from the creator:
 $! libwriter	The name of the writer routine to call for each .num file line
 $! -----
 $
-$! ----- Subroutines for AXP
+$! ----- Subroutines for non-VAX
 $! -----
 $! The creator routine
-$ create_axp_shr:
-$   open/write opt 'libopt'
+$ create_nonvax_shr:
+$   open /write opt 'libopt'
 $   write opt "identification=""",libid," ",libverstr,""""
-$   write opt libolb,"/lib"
+$   write opt libolb, " /library"
 $   if libref .nes. "" then write opt libref,"/SHARE"
 $   write opt "SYMBOL_VECTOR=(-"
 $   libfirstentry := true
 $   libwrch   := opt
-$   libwriter := write_axp_transfer_entry
+$   libwriter := write_nonvax_transfer_entry
 $   textcount = 0
 $   gosub read_func_num
 $   write opt ")"
 $   write opt "GSMATCH=",libvmatch,",",libver
 $   close opt
-$   link/map='libmap'/full/share='libgoal' 'libopt'/option
+$   link /map = 'libmap' /full /share = 'libgoal' 'libopt' /options -
+     'zlib_lib'
 $   return
 $
 $! The record writer routine
-$ write_axp_transfer_entry:
+$ write_nonvax_transfer_entry:
 $   if libentry .eqs. ".dummy" then return
 $   if info_kind .eqs. "VARIABLE"
 $   then
@@ -144,11 +236,11 @@ $   libfirstentry := false
 $   textcount = textcount + textcount_this
 $   return
 $
-$! ----- Subroutines for AXP
+$! ----- Subroutines for VAX
 $! -----
 $! The creator routine
 $ create_vax_shr:
-$   open/write mar 'libmar'
+$   open /write mar 'libmar'
 $   type sys$input:/out=mar:
 ;
 ; Transfer vector for VAX shareable image
@@ -183,10 +275,10 @@ $!   libwriter := write_vax_vtransfer_entry
 $!   gosub read_func_num
 $   write mar "	.END"
 $   close mar
-$   open/write opt 'libopt'
+$   open /write opt 'libopt'
 $   write opt "identification=""",libid," ",libverstr,""""
 $   write opt libobj
-$   write opt libolb,"/lib"
+$   write opt libolb, " /library"
 $   if libref .nes. "" then write opt libref,"/SHARE"
 $   type sys$input:/out=opt:
 !
@@ -205,7 +297,8 @@ $   libwriter := write_vax_psect_attr
 $   gosub read_func_num
 $   close opt
 $   macro/obj='libobj' 'libmar'
-$   link/map='libmap'/full/share='libgoal' 'libopt'/option
+$   link /map = 'libmap' /full /share = 'libgoal' 'libopt' /options -
+     'zlib_lib'
 $   return
 $
 $! The record writer routine for VAX functions
@@ -227,9 +320,9 @@ $   return
 $
 $! ----- Common subroutines
 $! -----
-$! The .num file reader.  This one has great responsability.
+$! The .num file reader.  This one has great responsibility.
 $ read_func_num:
-$   open libnum 'libnum'
+$   open /read libnum 'libnum'
 $   goto read_nums
 $
 $ read_nums:
@@ -237,35 +330,46 @@ $   libentrynum=0
 $   liblastentry:=false
 $   entrycount=0
 $   loop:
-$     read/end=loop_end/err=loop_end libnum line
-$     entrynum=f$int(f$element(1," ",f$edit(line,"COMPRESS,TRIM")))
-$     entryinfo=f$element(2," ",f$edit(line,"COMPRESS,TRIM"))
-$     curentry=f$element(0," ",f$edit(line,"COMPRESS,TRIM"))
-$     info_exist=f$element(0,":",entryinfo)
-$     info_platforms=","+f$element(1,":",entryinfo)+","
-$     info_kind=f$element(2,":",entryinfo)
-$     info_algorithms=","+f$element(3,":",entryinfo)+","
+$     read /end=loop_end /err=loop_end libnum line
+$     lin = f$edit( line, "COMPRESS,TRIM")
+$!    Skip a "#" comment line.
+$     if (f$extract( 0, 1, lin) .eqs. "#") then goto loop
+$     entrynum = f$int(f$element( 1, " ", lin))
+$     entryinfo = f$element( 2, " ", lin)
+$     curentry = f$element( 0, " ", lin)
+$     info_exist = f$element( 0, ":", entryinfo)
+$     info_platforms = ","+ f$element(1, ":", entryinfo)+ ","
+$     info_kind = f$element( 2, ":", entryinfo)
+$     info_algorithms = ","+ f$element( 3, ":", entryinfo)+ ","
 $     if info_exist .eqs. "NOEXIST" then goto loop
 $     truesum = 0
 $     falsesum = 0
 $     negatives = 1
 $     plat_i = 0
 $     loop1:
-$       plat_entry = f$element(plat_i,",",info_platforms)
+$       plat_entry = f$element( plat_i, ",", info_platforms)
 $       plat_i = plat_i + 1
 $       if plat_entry .eqs. "" then goto loop1
 $       if plat_entry .nes. ","
 $       then
 $         if f$extract(0,1,plat_entry) .nes. "!" then negatives = 0
-$         if f$getsyi("CPU") .lt. 128
+$         if (arch_vax)
 $         then
 $           if plat_entry .eqs. "EXPORT_VAR_AS_FUNCTION" then -
 $             truesum = truesum + 1
 $           if plat_entry .eqs. "!EXPORT_VAR_AS_FUNCTION" then -
 $             falsesum = falsesum + 1
 $         endif
-$         if plat_entry .eqs. "VMS" then truesum = truesum + 1
-$         if plat_entry .eqs. "!VMS" then falsesum = falsesum + 1
+$!
+$         if ((plat_entry .eqs. "VMS") .or. -
+            ((plat_entry .eqs. "ZLIB") .and. (ZLIB .nes. "")) .or. -
+            (arch_vax .and. (plat_entry .eqs. "VMSVAX"))) then -
+            truesum = truesum + 1
+$!
+$         if ((plat_entry .eqs. "!VMS") .or. -
+            (arch_vax .and. (plat_entry .eqs. "!VMSVAX"))) then -
+            falsesum = falsesum + 1
+$!
 $	  goto loop1
 $       endif
 $     endloop1:
@@ -284,8 +388,7 @@ $	alg_i = alg_i + 1
 $       if alg_entry .eqs. "" then goto loop2
 $       if alg_entry .nes. ","
 $       then
-$         if alg_entry .eqs. "KRB5" then goto loop ! Special for now
-$	  if alg_entry .eqs. "STATIC_ENGINE" then goto loop ! Special for now
+$	  if disabled_algorithms - ("," + alg_entry + ",") .nes disabled_algorithms then goto loop
 $         if f$trnlnm("OPENSSL_NO_"+alg_entry) .nes. "" then goto loop
 $	  goto loop2
 $       endif
@@ -328,7 +431,7 @@ $
 $! The version number reader
 $ read_version_info:
 $   libver = ""
-$   open/read vf [.CRYPTO]OPENSSLV.H
+$   open /read vf [.CRYPTO]OPENSSLV.H
 $   loop_rvi:
 $     read/err=endloop_rvi/end=endloop_rvi vf rvi_line
 $     if rvi_line - "SHLIB_VERSION_NUMBER """ .eqs. rvi_line then -
@@ -352,3 +455,22 @@ $     endif
 $   endloop_rvi:
 $   close vf
 $   return
+$
+$! The disabled algorithms reader
+$ read_disabled_algorithms_info:
+$   disabled_algorithms = ","
+$   open /read cf [.CRYPTO.'ARCH']OPENSSLCONF.H
+$   loop_rci:
+$     read/err=endloop_rci/end=endloop_rci cf rci_line
+$     rci_line = f$edit(rci_line,"TRIM,COMPRESS")
+$     rci_ei = 0
+$     if f$extract(0,9,rci_line) .eqs. "# define " then rci_ei = 2
+$     if f$extract(0,8,rci_line) .eqs. "#define " then rci_ei = 1
+$     if rci_ei .eq. 0 then goto loop_rci
+$     rci_e = f$element(rci_ei," ",rci_line)
+$     if f$extract(0,11,rci_e) .nes. "OPENSSL_NO_" then goto loop_rci
+$     disabled_algorithms = disabled_algorithms + f$extract(11,999,rci_e) + ","
+$     goto loop_rci
+$   endloop_rci:
+$   close cf
+$   return

VMS/openssl_startup.com

@@ -0,0 +1,108 @@
+$!
+$! Startup file for OpenSSL 1.x.
+$!
+$! 2011-03-05 SMS.
+$!
+$! This procedure must reside in the OpenSSL installation directory.
+$! It will fail if it is copied to a different location.
+$!
+$! P1  qualifier(s) for DEFINE.  For example, "/SYSTEM" to get the
+$!     logical names defined in the system logical name table.
+$!
+$! P2  "64", to use executables which were built with 64-bit pointers.
+$!
+$! Good (default) and bad status values.
+$!
+$ status =    %x00010001 ! RMS$_NORMAL, normal successful completion.
+$ rms_e_fnf = %x00018292 ! RMS$_FNF, file not found.
+$!
+$! Prepare for problems.
+$!
+$ orig_dev_dir = f$environment( "DEFAULT")
+$ on control_y then goto clean_up
+$ on error then goto clean_up
+$!
+$! Determine hardware architecture.
+$!
+$ if (f$getsyi( "cpu") .lt. 128)
+$ then
+$   arch_name = "VAX"
+$ else
+$   arch_name = f$edit( f$getsyi( "arch_name"), "upcase")
+$   if (arch_name .eqs. "") then arch_name = "UNK"
+$ endif
+$!
+$ if (p2 .eqs. "64")
+$ then
+$   arch_name_exe = arch_name+ "_64"
+$ else
+$   arch_name_exe = arch_name
+$ endif
+$!
+$! Derive the OpenSSL installation device:[directory] from the location
+$! of this command procedure.
+$!
+$ proc = f$environment( "procedure")
+$ proc_dev_dir = f$parse( "A.;", proc, , , "no_conceal") - "A.;"
+$ proc_dev = f$parse( proc_dev_dir, , , "device", "syntax_only")
+$ proc_dir = f$parse( proc_dev_dir, , , "directory", "syntax_only") - -
+   ".][000000"- "[000000."- "]["- "["- "]"
+$ proc_dev_dir = proc_dev+ "["+ proc_dir+ "]"
+$ set default 'proc_dev_dir'
+$ set default [-]
+$ ossl_dev_dir = f$environment( "default")
+$!
+$! Check existence of expected directories (to see if this procedure has
+$! been moved away from its proper place).
+$!
+$ if ((f$search( "certs.dir;1") .eqs. "") .or. -
+   (f$search( "include.dir;1") .eqs. "") .or. -
+   (f$search( "private.dir;1") .eqs. "") .or. -
+   (f$search( "vms.dir;1") .eqs. ""))
+$ then
+$    write sys$output -
+      "   Can't find expected common OpenSSL directories in:"
+$    write sys$output "   ''ossl_dev_dir'"
+$    status = rms_e_fnf
+$    goto clean_up
+$ endif
+$!
+$ if ((f$search( "''arch_name_exe'_exe.dir;1") .eqs. "") .or. -
+   (f$search( "''arch_name'_lib.dir;1") .eqs. ""))
+$ then
+$    write sys$output -
+      "   Can't find expected architecture-specific OpenSSL directories in:"
+$    write sys$output "   ''ossl_dev_dir'"
+$    status = rms_e_fnf
+$    goto clean_up
+$ endif
+$!
+$! All seems well (enough).  Define the OpenSSL logical names.
+$!
+$ ossl_root = ossl_dev_dir- "]"+ ".]"
+$ define /translation_attributes = concealed /nolog'p1 SSLROOT 'ossl_root'
+$ define /nolog 'p1' SSLCERTS     sslroot:[certs]
+$ define /nolog 'p1' SSLINCLUDE   sslroot:[include]
+$ define /nolog 'p1' SSLPRIVATE   sslroot:[private]
+$ define /nolog 'p1' SSLEXE       sslroot:['arch_name_exe'_exe]
+$ define /nolog 'p1' SSLLIB       sslroot:['arch_name'_lib]
+$!
+$! Defining OPENSSL lets a C program use "#include <openssl/{foo}.h>":
+$ define /nolog 'p1' OPENSSL      SSLINCLUDE:
+$!
+$! Run a site-specific procedure, if it exists.
+$!
+$ if f$search( "sslroot:[vms]openssl_systartup.com") .nes."" then -
+   @ sslroot:[vms]openssl_systartup.com
+$!
+$! Restore the original default dev:[dir] (if known).
+$!
+$ clean_up:
+$!
+$ if (f$type( orig_dev_dir) .nes. "")
+$ then
+$    set default 'orig_dev_dir'
+$ endif
+$!
+$ EXIT 'status'
+$!

VMS/openssl_undo.com

@@ -0,0 +1,20 @@
+$!
+$! Deassign OpenSSL logical names.
+$!
+$ call deass "OPENSSL" "''p1'"
+$ call deass "SSLCERTS" "''p1'"
+$ call deass "SSLEXE" "''p1'"
+$ call deass "SSLINCLUDE" "''p1'"
+$ call deass "SSLLIB" "''p1'"
+$ call deass "SSLPRIVATE" "''p1'"
+$ call deass "SSLROOT" "''p1'"
+$!
+$ exit
+$!
+$deass: subroutine
+$ if (f$trnlnm( p1) .nes. "")
+$ then
+$    deassign 'p2' 'p1'
+$ endif
+$ endsubroutine
+$!

VMS/openssl_utils.com

@@ -8,31 +8,39 @@ $!
 $!
 $! Slightly modified by Richard Levitte <richard@levitte.org>
 $!
+$!
+$! Always define OPENSSL.  Others are optional (non-null P1).
+$!
 $ OPENSSL  :== $SSLEXE:OPENSSL
-$ VERIFY   :== $SSLEXE:OPENSSL VERIFY
-$ ASN1PARSE:== $SSLEXE:OPENSSL ASN1PARS
-$ REQ      :== $SSLEXE:OPENSSL REQ
-$ DGST     :== $SSLEXE:OPENSSL DGST
-$ DH       :== $SSLEXE:OPENSSL DH
-$ ENC      :== $SSLEXE:OPENSSL ENC
-$ GENDH    :== $SSLEXE:OPENSSL GENDH
-$ ERRSTR   :== $SSLEXE:OPENSSL ERRSTR
-$ CA       :== $SSLEXE:OPENSSL CA
-$ CRL      :== $SSLEXE:OPENSSL CRL
-$ RSA      :== $SSLEXE:OPENSSL RSA
-$ DSA      :== $SSLEXE:OPENSSL DSA
-$ DSAPARAM :== $SSLEXE:OPENSSL DSAPARAM
-$ X509     :== $SSLEXE:OPENSSL X509
-$ GENRSA   :== $SSLEXE:OPENSSL GENRSA
-$ GENDSA   :== $SSLEXE:OPENSSL GENDSA
-$ S_SERVER :== $SSLEXE:OPENSSL S_SERVER
-$ S_CLIENT :== $SSLEXE:OPENSSL S_CLIENT
-$ SPEED    :== $SSLEXE:OPENSSL SPEED
-$ S_TIME   :== $SSLEXE:OPENSSL S_TIME
-$ VERSION  :== $SSLEXE:OPENSSL VERSION
-$ PKCS7    :== $SSLEXE:OPENSSL PKCS7
-$ CRL2PKCS7:== $SSLEXE:OPENSSL CRL2P7
-$ SESS_ID  :== $SSLEXE:OPENSSL SESS_ID
-$ CIPHERS  :== $SSLEXE:OPENSSL CIPHERS
-$ NSEQ     :== $SSLEXE:OPENSSL NSEQ
-$ PKCS12   :== $SSLEXE:OPENSSL PKCS12
+$
+$ IF (P1 .NES. "")
+$ THEN
+$     VERIFY   :== $SSLEXE:OPENSSL VERIFY
+$     ASN1PARSE:== $SSLEXE:OPENSSL ASN1PARS
+$! REQ could conflict with REQUEST.
+$     OREQ     :== $SSLEXE:OPENSSL REQ
+$     DGST     :== $SSLEXE:OPENSSL DGST
+$     DH       :== $SSLEXE:OPENSSL DH
+$     ENC      :== $SSLEXE:OPENSSL ENC
+$     GENDH    :== $SSLEXE:OPENSSL GENDH
+$     ERRSTR   :== $SSLEXE:OPENSSL ERRSTR
+$     CA       :== $SSLEXE:OPENSSL CA
+$     CRL      :== $SSLEXE:OPENSSL CRL
+$     RSA      :== $SSLEXE:OPENSSL RSA
+$     DSA      :== $SSLEXE:OPENSSL DSA
+$     DSAPARAM :== $SSLEXE:OPENSSL DSAPARAM
+$     X509     :== $SSLEXE:OPENSSL X509
+$     GENRSA   :== $SSLEXE:OPENSSL GENRSA
+$     GENDSA   :== $SSLEXE:OPENSSL GENDSA
+$     S_SERVER :== $SSLEXE:OPENSSL S_SERVER
+$     S_CLIENT :== $SSLEXE:OPENSSL S_CLIENT
+$     SPEED    :== $SSLEXE:OPENSSL SPEED
+$     S_TIME   :== $SSLEXE:OPENSSL S_TIME
+$     VERSION  :== $SSLEXE:OPENSSL VERSION
+$     PKCS7    :== $SSLEXE:OPENSSL PKCS7
+$     CRL2PKCS7:== $SSLEXE:OPENSSL CRL2P7
+$     SESS_ID  :== $SSLEXE:OPENSSL SESS_ID
+$     CIPHERS  :== $SSLEXE:OPENSSL CIPHERS
+$     NSEQ     :== $SSLEXE:OPENSSL NSEQ
+$     PKCS12   :== $SSLEXE:OPENSSL PKCS12
+$ ENDIF

apps/CA.com

@@ -37,14 +37,25 @@ $ VERIFY = openssl + " verify"
 $ X509   = openssl + " x509"
 $ PKCS12 = openssl + " pkcs12"
 $ echo   = "write sys$Output"
+$ RET = 1
 $!
-$ s = F$PARSE(F$ENVIRONMENT("DEFAULT"),"[]") - "].;"
-$ CATOP  := 's'.demoCA
-$ CAKEY  := ]cakey.pem
-$ CACERT := ]cacert.pem
+$! 2010-12-20 SMS.
+$! Use a concealed logical name to reduce command line lengths, to
+$! avoid DCL errors on VAX:
+$!     %DCL-W-TKNOVF, command element is too long - shorten
+$! (Path segments like "openssl-1_0_1-stable-SNAP-20101217" accumulate
+$! quickly.)
+$!
+$ CATOP = F$PARSE( F$ENVIRONMENT( "DEFAULT"), "[]")- "].;"+ ".demoCA.]"
+$ define /translation_attributes = concealed CATOP 'CATOP'
+$!
+$ on error then goto clean_up
+$ on control_y then goto clean_up
+$!
+$ CAKEY  = "CATOP:[private]cakey.pem"
+$ CACERT = "CATOP:[000000]cacert.pem"
 $
 $ __INPUT := SYS$COMMAND
-$ RET = 1
 $!
 $ i = 1
 $opt_loop:
@@ -55,7 +66,7 @@ $
 $ IF (prog_opt .EQS. "?" .OR. prog_opt .EQS. "-h" .OR. prog_opt .EQS. "-help") 
 $ THEN
 $   echo "usage: CA -newcert|-newreq|-newca|-sign|-verify" 
-$   exit
+$   goto clean_up
 $ ENDIF
 $!
 $ IF (prog_opt .EQS. "-input")
@@ -69,7 +80,7 @@ $!
 $ IF (prog_opt .EQS. "-newcert")
 $ THEN
 $   ! Create a certificate.
-$   DEFINE/USER SYS$INPUT '__INPUT'
+$   DEFINE /USER_MODE SYS$INPUT '__INPUT'
 $   REQ -new -x509 -keyout newreq.pem -out newreq.pem 'DAYS'
 $   RET=$STATUS
 $   echo "Certificate (and private key) is in newreq.pem"
@@ -79,7 +90,7 @@ $!
 $ IF (prog_opt .EQS. "-newreq")
 $ THEN
 $   ! Create a certificate request
-$   DEFINE/USER SYS$INPUT '__INPUT'
+$   DEFINE /USER_MODE SYS$INPUT '__INPUT'
 $   REQ -new -keyout newreq.pem -out newreq.pem 'DAYS'
 $   RET=$STATUS
 $   echo "Request (and private key) is in newreq.pem"
@@ -90,41 +101,40 @@ $ IF (prog_opt .EQS. "-newca")
 $ THEN
 $   ! If explicitly asked for or it doesn't exist then setup the directory
 $   ! structure that Eric likes to manage things.
-$   IF F$SEARCH(CATOP+"]serial.") .EQS. ""
+$   IF F$SEARCH( "CATOP:[000000]serial.") .EQS. ""
 $   THEN
-$     CREATE /DIR /PROTECTION=OWNER:RWED 'CATOP']
-$     CREATE /DIR /PROTECTION=OWNER:RWED 'CATOP'.certs]
-$     CREATE /DIR /PROTECTION=OWNER:RWED 'CATOP'.crl]
-$     CREATE /DIR /PROTECTION=OWNER:RWED 'CATOP'.newcerts]
-$     CREATE /DIR /PROTECTION=OWNER:RWED 'CATOP'.private]
+$     CREATE /DIRECTORY /PROTECTION=OWNER:RWED CATOP:[000000]
+$     CREATE /DIRECTORY /PROTECTION=OWNER:RWED CATOP:[certs]
+$     CREATE /DIRECTORY /PROTECTION=OWNER:RWED CATOP:[crl]
+$     CREATE /DIRECTORY /PROTECTION=OWNER:RWED CATOP:[newcerts]
+$     CREATE /DIRECTORY /PROTECTION=OWNER:RWED CATOP:[private]
 $
-$     OPEN   /WRITE ser_file 'CATOP']serial. 
+$     OPEN /WRITE ser_file CATOP:[000000]serial. 
 $     WRITE ser_file "01"
 $     CLOSE ser_file
-$     APPEND/NEW NL: 'CATOP']index.txt
+$     APPEND /NEW_VERSION NL: CATOP:[000000]index.txt
 $
 $     ! The following is to make sure access() doesn't get confused.  It
 $     ! really needs one file in the directory to give correct answers...
-$     COPY NLA0: 'CATOP'.certs].;
-$     COPY NLA0: 'CATOP'.crl].;
-$     COPY NLA0: 'CATOP'.newcerts].;
-$     COPY NLA0: 'CATOP'.private].;
+$     COPY NLA0: CATOP:[certs].;
+$     COPY NLA0: CATOP:[crl].;
+$     COPY NLA0: CATOP:[newcerts].;
+$     COPY NLA0: CATOP:[private].;
 $   ENDIF
 $!
-$   IF F$SEARCH(CATOP+".private"+CAKEY) .EQS. ""
+$   IF F$SEARCH( CAKEY) .EQS. ""
 $   THEN
 $     READ '__INPUT' FILE -
-	   /PROMT="CA certificate filename (or enter to create)"
-$     IF F$SEARCH(FILE) .NES. ""
+       /PROMPT="CA certificate filename (or enter to create): "
+$     IF (FILE .NES. "") .AND. (F$SEARCH(FILE) .NES. "")
 $     THEN
-$       COPY 'FILE' 'CATOP'.private'CAKEY'
-$	RET=$STATUS
+$       COPY 'FILE' 'CAKEY'
+$       RET=$STATUS
 $     ELSE
 $       echo "Making CA certificate ..."
-$       DEFINE/USER SYS$INPUT '__INPUT'
-$       REQ -new -x509 -keyout 'CATOP'.private'CAKEY' -
-		       -out 'CATOP''CACERT' 'DAYS'
-$	RET=$STATUS
+$       DEFINE /USER_MODE SYS$INPUT '__INPUT'
+$       REQ -new -x509 -keyout 'CAKEY' -out 'CACERT' 'DAYS'
+$       RET=$STATUS
 $     ENDIF
 $   ENDIF
 $   GOTO opt_loop_continue
@@ -135,16 +145,16 @@ $ THEN
 $   i = i + 1
 $   cname = P'i'
 $   IF cname .EQS. "" THEN cname = "My certificate"
-$   PKCS12 -in newcert.pem -inkey newreq.pem -certfile 'CATOP''CACERT -
-	   -out newcert.p12 -export -name "''cname'"
+$   PKCS12 -in newcert.pem -inkey newreq.pem -certfile 'CACERT' -
+     -out newcert.p12 -export -name "''cname'"
 $   RET=$STATUS
-$   exit RET
+$   goto clean_up
 $ ENDIF
 $!
 $ IF (prog_opt .EQS. "-xsign")
 $ THEN
 $!
-$   DEFINE/USER SYS$INPUT '__INPUT'
+$   DEFINE /USER_MODE SYS$INPUT '__INPUT'
 $   CA -policy policy_anything -infiles newreq.pem
 $   RET=$STATUS
 $   GOTO opt_loop_continue
@@ -153,7 +163,7 @@ $!
 $ IF ((prog_opt .EQS. "-sign") .OR. (prog_opt .EQS. "-signreq"))
 $ THEN
 $!   
-$   DEFINE/USER SYS$INPUT '__INPUT'
+$   DEFINE /USER_MODE SYS$INPUT '__INPUT'
 $   CA -policy policy_anything -out newcert.pem -infiles newreq.pem
 $   RET=$STATUS
 $   type newcert.pem
@@ -165,9 +175,9 @@ $ IF (prog_opt .EQS. "-signcert")
 $  THEN
 $!   
 $   echo "Cert passphrase will be requested twice - bug?"
-$   DEFINE/USER SYS$INPUT '__INPUT'
+$   DEFINE /USER_MODE SYS$INPUT '__INPUT'
 $   X509 -x509toreq -in newreq.pem -signkey newreq.pem -out tmp.pem
-$   DEFINE/USER SYS$INPUT '__INPUT'
+$   DEFINE /USER_MODE SYS$INPUT '__INPUT'
 $   CA -policy policy_anything -out newcert.pem -infiles tmp.pem
 y
 y
@@ -182,17 +192,17 @@ $!
 $   i = i + 1
 $   IF (p'i' .EQS. "")
 $   THEN
-$     DEFINE/USER SYS$INPUT '__INPUT'
-$     VERIFY "-CAfile" 'CATOP''CACERT' newcert.pem
+$     DEFINE /USER_MODE SYS$INPUT '__INPUT'
+$     VERIFY "-CAfile" 'CACERT' newcert.pem
 $   ELSE
 $     j = i
 $    verify_opt_loop:
 $     IF j .GT. 8 THEN GOTO verify_opt_loop_end
 $     IF p'j' .NES. ""
 $     THEN 
-$       DEFINE/USER SYS$INPUT '__INPUT'
+$       DEFINE /USER_MODE SYS$INPUT '__INPUT'
 $       __tmp = p'j'
-$       VERIFY "-CAfile" 'CATOP''CACERT' '__tmp'
+$       VERIFY "-CAfile" 'CACERT' '__tmp'
 $       tmp=$STATUS
 $       IF tmp .NE. 0 THEN RET=tmp
 $     ENDIF
@@ -208,8 +218,8 @@ $ IF (prog_opt .NES. "")
 $ THEN
 $!   
 $   echo "Unknown argument ''prog_opt'"
-$   
-$   EXIT 3
+$   RET = 3
+$   goto clean_up
 $ ENDIF
 $
 $opt_loop_continue:
@@ -217,4 +227,10 @@ $ i = i + 1
 $ GOTO opt_loop
 $
 $opt_loop_end:
+$!
+$clean_up:
+$!
+$ if f$trnlnm( "CATOP", "LNM$PROCESS") .nes. "" then -
+   deassign /process CATOP
+$!
 $ EXIT 'RET'

apps/CA.sh

@@ -5,10 +5,10 @@
 #      things easier between now and when Eric is convinced to fix it :-)
 #
 # CA -newca ... will setup the right stuff
-# CA -newreq ... will generate a certificate request 
-# CA -sign ... will sign the generated request and output 
+# CA -newreq ... will generate a certificate request
+# CA -sign ... will sign the generated request and output
 #
-# At the end of that grab newreq.pem and newcert.pem (one has the key 
+# At the end of that grab newreq.pem and newcert.pem (one has the key
 # and the other the certificate) and cat them together and that is what
 # you want/need ... I'll make even this a little cleaner later.
 #
@@ -16,8 +16,8 @@
 # 12-Jan-96 tjh    Added more things ... including CA -signcert which
 #                  converts a certificate to a request and then signs it.
 # 10-Jan-96 eay    Fixed a few more bugs and added the SSLEAY_CONFIG
-#		   environment variable so this can be driven from
-#		   a script.
+#                  environment variable so this can be driven from
+#                  a script.
 # 25-Jul-96 eay    Cleaned up filenames some more.
 # 11-Jun-96 eay    Fixed a few filename missmatches.
 # 03-May-96 eay    Modified to use 'ssleay cmd' instead of 'cmd'.
@@ -29,52 +29,87 @@
 
 # default openssl.cnf file has setup as per the following
 # demoCA ... where everything is stored
+cp_pem() {
+    infile=$1
+    outfile=$2
+    bound=$3
+    flag=0
+    exec <$infile;
+    while read line; do
+	if [ $flag -eq 1 ]; then
+		echo $line|grep "^-----END.*$bound"  2>/dev/null 1>/dev/null
+		if [ $? -eq 0 ] ; then
+			echo $line >>$outfile
+			break
+		else
+			echo $line >>$outfile
+		fi
+	fi
+
+	echo $line|grep "^-----BEGIN.*$bound"  2>/dev/null 1>/dev/null
+	if [ $? -eq 0 ]; then
+		echo $line >$outfile
+		flag=1
+	fi
+    done
+}
+
+usage() {
+ echo "usage: $0 -newcert|-newreq|-newreq-nodes|-newca|-sign|-verify" >&2
+}
 
 if [ -z "$OPENSSL" ]; then OPENSSL=openssl; fi
 
-DAYS="-days 365"	# 1 year
+if [ -z "$DAYS" ] ; then DAYS="-days 365" ; fi	# 1 year
 CADAYS="-days 1095"	# 3 years
 REQ="$OPENSSL req $SSLEAY_CONFIG"
 CA="$OPENSSL ca $SSLEAY_CONFIG"
 VERIFY="$OPENSSL verify"
 X509="$OPENSSL x509"
+PKCS12="openssl pkcs12"
 
-CATOP=./demoCA
+if [ -z "$CATOP" ] ; then CATOP=./demoCA ; fi
 CAKEY=./cakey.pem
 CAREQ=./careq.pem
 CACERT=./cacert.pem
 
-for i
-do
-case $i in
+RET=0
+
+while [ "$1" != "" ] ; do
+case $1 in
 -\?|-h|-help)
-    echo "usage: CA -newcert|-newreq|-newca|-sign|-verify" >&2
+    usage
     exit 0
     ;;
--newcert) 
+-newcert)
     # create a certificate
     $REQ -new -x509 -keyout newkey.pem -out newcert.pem $DAYS
     RET=$?
     echo "Certificate is in newcert.pem, private key is in newkey.pem"
     ;;
--newreq) 
+-newreq)
     # create a certificate request
     $REQ -new -keyout newkey.pem -out newreq.pem $DAYS
     RET=$?
     echo "Request is in newreq.pem, private key is in newkey.pem"
     ;;
--newca)     
+-newreq-nodes) 
+    # create a certificate request
+    $REQ -new -nodes -keyout newreq.pem -out newreq.pem $DAYS
+    RET=$?
+    echo "Request (and private key) is in newreq.pem"
+    ;;
+-newca)
     # if explicitly asked for or it doesn't exist then setup the directory
-    # structure that Eric likes to manage things 
+    # structure that Eric likes to manage things
     NEW="1"
     if [ "$NEW" -o ! -f ${CATOP}/serial ]; then
 	# create the directory hierarchy
-	mkdir ${CATOP} 
-	mkdir ${CATOP}/certs 
-	mkdir ${CATOP}/crl 
-	mkdir ${CATOP}/newcerts
-	mkdir ${CATOP}/private
-	echo "00" > ${CATOP}/serial
+	mkdir -p ${CATOP}
+	mkdir -p ${CATOP}/certs
+	mkdir -p ${CATOP}/crl
+	mkdir -p ${CATOP}/newcerts
+	mkdir -p ${CATOP}/private
 	touch ${CATOP}/index.txt
     fi
     if [ ! -f ${CATOP}/private/$CAKEY ]; then
@@ -83,37 +118,60 @@ case $i in
 
 	# ask user for existing CA certificate
 	if [ "$FILE" ]; then
-	    cp $FILE ${CATOP}/private/$CAKEY
+	    cp_pem $FILE ${CATOP}/private/$CAKEY PRIVATE
+	    cp_pem $FILE ${CATOP}/$CACERT CERTIFICATE
 	    RET=$?
+	    if [ ! -f "${CATOP}/serial" ]; then
+		$X509 -in ${CATOP}/$CACERT -noout -next_serial \
+		      -out ${CATOP}/serial
+	    fi
 	else
 	    echo "Making CA certificate ..."
 	    $REQ -new -keyout ${CATOP}/private/$CAKEY \
 			   -out ${CATOP}/$CAREQ
-	    $CA -out ${CATOP}/$CACERT $CADAYS -batch \
+	    $CA -create_serial -out ${CATOP}/$CACERT $CADAYS -batch \
 			   -keyfile ${CATOP}/private/$CAKEY -selfsign \
-			   -infiles ${CATOP}/$CAREQ 
+			   -extensions v3_ca \
+			   -infiles ${CATOP}/$CAREQ
 	    RET=$?
 	fi
     fi
     ;;
 -xsign)
-    $CA -policy policy_anything -infiles newreq.pem 
+    $CA -policy policy_anything -infiles newreq.pem
     RET=$?
     ;;
--sign|-signreq) 
+-pkcs12)
+    if [ -z "$2" ] ; then
+	CNAME="My Certificate"
+    else
+	CNAME="$2"
+    fi
+    $PKCS12 -in newcert.pem -inkey newreq.pem -certfile ${CATOP}/$CACERT \
+	    -out newcert.p12 -export -name "$CNAME"
+    RET=$?
+    exit $RET
+    ;;
+-sign|-signreq)
     $CA -policy policy_anything -out newcert.pem -infiles newreq.pem
     RET=$?
     cat newcert.pem
     echo "Signed certificate is in newcert.pem"
     ;;
--signcert) 
+-signCA)
+    $CA -policy policy_anything -out newcert.pem -extensions v3_ca -infiles newreq.pem
+    RET=$?
+    echo "Signed CA certificate is in newcert.pem"
+    ;;
+-signcert)
     echo "Cert passphrase will be requested twice - bug?"
     $X509 -x509toreq -in newreq.pem -signkey newreq.pem -out tmp.pem
     $CA -policy policy_anything -out newcert.pem -infiles tmp.pem
+    RET=$?
     cat newcert.pem
     echo "Signed certificate is in newcert.pem"
     ;;
--verify) 
+-verify)
     shift
     if [ -z "$1" ]; then
 	    $VERIFY -CAfile $CATOP/$CACERT newcert.pem
@@ -127,13 +185,14 @@ case $i in
 	    fi
 	done
     fi
-    exit 0
+    exit $RET
     ;;
 *)
-    echo "Unknown arg $i";
+    echo "Unknown arg $i" >&2
+    usage
     exit 1
     ;;
 esac
+shift
 done
 exit $RET
-

apps/Makefile

@@ -39,7 +39,7 @@ E_EXE=	verify asn1pars req dgst dh dhparam enc passwd gendh errstr \
 	ca crl rsa rsautl dsa dsaparam ec ecparam \
 	x509 genrsa gendsa genpkey s_server s_client speed \
 	s_time version pkcs7 cms crl2pkcs7 sess_id ciphers nseq pkcs12 \
-	pkcs8 pkey pkeyparam pkeyutl spkac smime rand engine ocsp prime ts
+	pkcs8 pkey pkeyparam pkeyutl spkac smime rand engine ocsp prime ts srp
 
 PROGS= $(PROGRAM).c
 
@@ -56,7 +56,7 @@ E_OBJ=	verify.o asn1pars.o req.o dgst.o dh.o dhparam.o enc.o passwd.o gendh.o er
 	x509.o genrsa.o gendsa.o genpkey.o s_server.o s_client.o speed.o \
 	s_time.o $(A_OBJ) $(S_OBJ) $(RAND_OBJ) version.o sess_id.o \
 	ciphers.o nseq.o pkcs12.o pkcs8.o pkey.o pkeyparam.o pkeyutl.o \
-	spkac.o smime.o cms.o rand.o engine.o ocsp.o prime.o ts.o
+	spkac.o smime.o cms.o rand.o engine.o ocsp.o prime.o ts.o srp.o
 
 E_SRC=	verify.c asn1pars.c req.c dgst.c dh.c enc.c passwd.c gendh.c errstr.c ca.c \
 	pkcs7.c crl2p7.c crl.c \
@@ -64,7 +64,7 @@ E_SRC=	verify.c asn1pars.c req.c dgst.c dh.c enc.c passwd.c gendh.c errstr.c ca.
 	x509.c genrsa.c gendsa.c genpkey.c s_server.c s_client.c speed.c \
 	s_time.c $(A_SRC) $(S_SRC) $(RAND_SRC) version.c sess_id.c \
 	ciphers.c nseq.c pkcs12.c pkcs8.c pkey.c pkeyparam.c pkeyutl.c \
-	spkac.c smime.c cms.c rand.c engine.c ocsp.c prime.c ts.c
+	spkac.c smime.c cms.c rand.c engine.c ocsp.c prime.c ts.c srp.c
 
 SRC=$(E_SRC)
 
@@ -153,6 +153,8 @@ $(EXE): progs.h $(E_OBJ) $(PROGRAM).o $(DLIBCRYPTO) $(DLIBSSL)
 	$(RM) $(EXE)
 	shlib_target=; if [ -n "$(SHARED_LIBS)" ]; then \
 		shlib_target="$(SHLIB_TARGET)"; \
+	elif [ -n "$(FIPSCANLIB)" ]; then \
+	  FIPSLD_CC="$(CC)"; CC=$(FIPSDIR)/bin/fipsld; export CC FIPSLD_CC; \
 	fi; \
 	LIBRARIES="$(LIBSSL) $(LIBKRB5) $(LIBCRYPTO)" ; \
 	$(MAKE) -f $(TOP)/Makefile.shared -e \
@@ -245,13 +247,13 @@ ciphers.o: ../include/openssl/opensslconf.h ../include/openssl/opensslv.h
 ciphers.o: ../include/openssl/ossl_typ.h ../include/openssl/pem.h
 ciphers.o: ../include/openssl/pem2.h ../include/openssl/pkcs7.h
 ciphers.o: ../include/openssl/pqueue.h ../include/openssl/safestack.h
-ciphers.o: ../include/openssl/sha.h ../include/openssl/ssl.h
-ciphers.o: ../include/openssl/ssl2.h ../include/openssl/ssl23.h
-ciphers.o: ../include/openssl/ssl3.h ../include/openssl/stack.h
-ciphers.o: ../include/openssl/symhacks.h ../include/openssl/tls1.h
-ciphers.o: ../include/openssl/txt_db.h ../include/openssl/x509.h
-ciphers.o: ../include/openssl/x509_vfy.h ../include/openssl/x509v3.h apps.h
-ciphers.o: ciphers.c
+ciphers.o: ../include/openssl/sha.h ../include/openssl/srtp.h
+ciphers.o: ../include/openssl/ssl.h ../include/openssl/ssl2.h
+ciphers.o: ../include/openssl/ssl23.h ../include/openssl/ssl3.h
+ciphers.o: ../include/openssl/stack.h ../include/openssl/symhacks.h
+ciphers.o: ../include/openssl/tls1.h ../include/openssl/txt_db.h
+ciphers.o: ../include/openssl/x509.h ../include/openssl/x509_vfy.h
+ciphers.o: ../include/openssl/x509v3.h apps.h ciphers.c
 cms.o: ../e_os.h ../include/openssl/asn1.h ../include/openssl/bio.h
 cms.o: ../include/openssl/buffer.h ../include/openssl/cms.h
 cms.o: ../include/openssl/conf.h ../include/openssl/crypto.h
@@ -427,13 +429,13 @@ engine.o: ../include/openssl/opensslconf.h ../include/openssl/opensslv.h
 engine.o: ../include/openssl/ossl_typ.h ../include/openssl/pem.h
 engine.o: ../include/openssl/pem2.h ../include/openssl/pkcs7.h
 engine.o: ../include/openssl/pqueue.h ../include/openssl/safestack.h
-engine.o: ../include/openssl/sha.h ../include/openssl/ssl.h
-engine.o: ../include/openssl/ssl2.h ../include/openssl/ssl23.h
-engine.o: ../include/openssl/ssl3.h ../include/openssl/stack.h
-engine.o: ../include/openssl/symhacks.h ../include/openssl/tls1.h
-engine.o: ../include/openssl/txt_db.h ../include/openssl/x509.h
-engine.o: ../include/openssl/x509_vfy.h ../include/openssl/x509v3.h apps.h
-engine.o: engine.c
+engine.o: ../include/openssl/sha.h ../include/openssl/srtp.h
+engine.o: ../include/openssl/ssl.h ../include/openssl/ssl2.h
+engine.o: ../include/openssl/ssl23.h ../include/openssl/ssl3.h
+engine.o: ../include/openssl/stack.h ../include/openssl/symhacks.h
+engine.o: ../include/openssl/tls1.h ../include/openssl/txt_db.h
+engine.o: ../include/openssl/x509.h ../include/openssl/x509_vfy.h
+engine.o: ../include/openssl/x509v3.h apps.h engine.c
 errstr.o: ../e_os.h ../include/openssl/asn1.h ../include/openssl/bio.h
 errstr.o: ../include/openssl/buffer.h ../include/openssl/comp.h
 errstr.o: ../include/openssl/conf.h ../include/openssl/crypto.h
@@ -448,13 +450,13 @@ errstr.o: ../include/openssl/opensslconf.h ../include/openssl/opensslv.h
 errstr.o: ../include/openssl/ossl_typ.h ../include/openssl/pem.h
 errstr.o: ../include/openssl/pem2.h ../include/openssl/pkcs7.h
 errstr.o: ../include/openssl/pqueue.h ../include/openssl/safestack.h
-errstr.o: ../include/openssl/sha.h ../include/openssl/ssl.h
-errstr.o: ../include/openssl/ssl2.h ../include/openssl/ssl23.h
-errstr.o: ../include/openssl/ssl3.h ../include/openssl/stack.h
-errstr.o: ../include/openssl/symhacks.h ../include/openssl/tls1.h
-errstr.o: ../include/openssl/txt_db.h ../include/openssl/x509.h
-errstr.o: ../include/openssl/x509_vfy.h ../include/openssl/x509v3.h apps.h
-errstr.o: errstr.c
+errstr.o: ../include/openssl/sha.h ../include/openssl/srtp.h
+errstr.o: ../include/openssl/ssl.h ../include/openssl/ssl2.h
+errstr.o: ../include/openssl/ssl23.h ../include/openssl/ssl3.h
+errstr.o: ../include/openssl/stack.h ../include/openssl/symhacks.h
+errstr.o: ../include/openssl/tls1.h ../include/openssl/txt_db.h
+errstr.o: ../include/openssl/x509.h ../include/openssl/x509_vfy.h
+errstr.o: ../include/openssl/x509v3.h apps.h errstr.c
 gendh.o: ../e_os.h ../include/openssl/asn1.h ../include/openssl/bio.h
 gendh.o: ../include/openssl/bn.h ../include/openssl/buffer.h
 gendh.o: ../include/openssl/conf.h ../include/openssl/crypto.h
@@ -556,12 +558,12 @@ ocsp.o: ../include/openssl/opensslv.h ../include/openssl/ossl_typ.h
 ocsp.o: ../include/openssl/pem.h ../include/openssl/pem2.h
 ocsp.o: ../include/openssl/pkcs7.h ../include/openssl/pqueue.h
 ocsp.o: ../include/openssl/safestack.h ../include/openssl/sha.h
-ocsp.o: ../include/openssl/ssl.h ../include/openssl/ssl2.h
-ocsp.o: ../include/openssl/ssl23.h ../include/openssl/ssl3.h
-ocsp.o: ../include/openssl/stack.h ../include/openssl/symhacks.h
-ocsp.o: ../include/openssl/tls1.h ../include/openssl/txt_db.h
-ocsp.o: ../include/openssl/x509.h ../include/openssl/x509_vfy.h
-ocsp.o: ../include/openssl/x509v3.h apps.h ocsp.c
+ocsp.o: ../include/openssl/srtp.h ../include/openssl/ssl.h
+ocsp.o: ../include/openssl/ssl2.h ../include/openssl/ssl23.h
+ocsp.o: ../include/openssl/ssl3.h ../include/openssl/stack.h
+ocsp.o: ../include/openssl/symhacks.h ../include/openssl/tls1.h
+ocsp.o: ../include/openssl/txt_db.h ../include/openssl/x509.h
+ocsp.o: ../include/openssl/x509_vfy.h ../include/openssl/x509v3.h apps.h ocsp.c
 openssl.o: ../e_os.h ../include/openssl/asn1.h ../include/openssl/bio.h
 openssl.o: ../include/openssl/buffer.h ../include/openssl/comp.h
 openssl.o: ../include/openssl/conf.h ../include/openssl/crypto.h
@@ -576,13 +578,13 @@ openssl.o: ../include/openssl/opensslconf.h ../include/openssl/opensslv.h
 openssl.o: ../include/openssl/ossl_typ.h ../include/openssl/pem.h
 openssl.o: ../include/openssl/pem2.h ../include/openssl/pkcs7.h
 openssl.o: ../include/openssl/pqueue.h ../include/openssl/safestack.h
-openssl.o: ../include/openssl/sha.h ../include/openssl/ssl.h
-openssl.o: ../include/openssl/ssl2.h ../include/openssl/ssl23.h
-openssl.o: ../include/openssl/ssl3.h ../include/openssl/stack.h
-openssl.o: ../include/openssl/symhacks.h ../include/openssl/tls1.h
-openssl.o: ../include/openssl/txt_db.h ../include/openssl/x509.h
-openssl.o: ../include/openssl/x509_vfy.h ../include/openssl/x509v3.h apps.h
-openssl.o: openssl.c progs.h s_apps.h
+openssl.o: ../include/openssl/sha.h ../include/openssl/srtp.h
+openssl.o: ../include/openssl/ssl.h ../include/openssl/ssl2.h
+openssl.o: ../include/openssl/ssl23.h ../include/openssl/ssl3.h
+openssl.o: ../include/openssl/stack.h ../include/openssl/symhacks.h
+openssl.o: ../include/openssl/tls1.h ../include/openssl/txt_db.h
+openssl.o: ../include/openssl/x509.h ../include/openssl/x509_vfy.h
+openssl.o: ../include/openssl/x509v3.h apps.h openssl.c progs.h s_apps.h
 passwd.o: ../e_os.h ../include/openssl/asn1.h ../include/openssl/bio.h
 passwd.o: ../include/openssl/buffer.h ../include/openssl/conf.h
 passwd.o: ../include/openssl/crypto.h ../include/openssl/des.h
@@ -789,8 +791,9 @@ s_cb.o: ../include/openssl/objects.h ../include/openssl/ocsp.h
 s_cb.o: ../include/openssl/opensslconf.h ../include/openssl/opensslv.h
 s_cb.o: ../include/openssl/ossl_typ.h ../include/openssl/pem.h
 s_cb.o: ../include/openssl/pem2.h ../include/openssl/pkcs7.h
-s_cb.o: ../include/openssl/pqueue.h ../include/openssl/safestack.h
-s_cb.o: ../include/openssl/sha.h ../include/openssl/ssl.h
+s_cb.o: ../include/openssl/pqueue.h ../include/openssl/rand.h
+s_cb.o: ../include/openssl/safestack.h ../include/openssl/sha.h
+s_cb.o: ../include/openssl/srtp.h ../include/openssl/ssl.h
 s_cb.o: ../include/openssl/ssl2.h ../include/openssl/ssl23.h
 s_cb.o: ../include/openssl/ssl3.h ../include/openssl/stack.h
 s_cb.o: ../include/openssl/symhacks.h ../include/openssl/tls1.h
@@ -812,7 +815,8 @@ s_client.o: ../include/openssl/opensslv.h ../include/openssl/ossl_typ.h
 s_client.o: ../include/openssl/pem.h ../include/openssl/pem2.h
 s_client.o: ../include/openssl/pkcs7.h ../include/openssl/pqueue.h
 s_client.o: ../include/openssl/rand.h ../include/openssl/safestack.h
-s_client.o: ../include/openssl/sha.h ../include/openssl/ssl.h
+s_client.o: ../include/openssl/sha.h ../include/openssl/srp.h
+s_client.o: ../include/openssl/srtp.h ../include/openssl/ssl.h
 s_client.o: ../include/openssl/ssl2.h ../include/openssl/ssl23.h
 s_client.o: ../include/openssl/ssl3.h ../include/openssl/stack.h
 s_client.o: ../include/openssl/symhacks.h ../include/openssl/tls1.h
@@ -836,6 +840,7 @@ s_server.o: ../include/openssl/pem.h ../include/openssl/pem2.h
 s_server.o: ../include/openssl/pkcs7.h ../include/openssl/pqueue.h
 s_server.o: ../include/openssl/rand.h ../include/openssl/rsa.h
 s_server.o: ../include/openssl/safestack.h ../include/openssl/sha.h
+s_server.o: ../include/openssl/srp.h ../include/openssl/srtp.h
 s_server.o: ../include/openssl/ssl.h ../include/openssl/ssl2.h
 s_server.o: ../include/openssl/ssl23.h ../include/openssl/ssl3.h
 s_server.o: ../include/openssl/stack.h ../include/openssl/symhacks.h
@@ -843,20 +848,21 @@ s_server.o: ../include/openssl/tls1.h ../include/openssl/txt_db.h
 s_server.o: ../include/openssl/ui.h ../include/openssl/x509.h
 s_server.o: ../include/openssl/x509_vfy.h ../include/openssl/x509v3.h apps.h
 s_server.o: s_apps.h s_server.c timeouts.h
-s_socket.o: ../e_os.h ../include/openssl/asn1.h ../include/openssl/bio.h
-s_socket.o: ../include/openssl/buffer.h ../include/openssl/comp.h
-s_socket.o: ../include/openssl/conf.h ../include/openssl/crypto.h
-s_socket.o: ../include/openssl/dtls1.h ../include/openssl/e_os2.h
-s_socket.o: ../include/openssl/ec.h ../include/openssl/ecdh.h
-s_socket.o: ../include/openssl/ecdsa.h ../include/openssl/engine.h
-s_socket.o: ../include/openssl/evp.h ../include/openssl/hmac.h
-s_socket.o: ../include/openssl/kssl.h ../include/openssl/lhash.h
-s_socket.o: ../include/openssl/obj_mac.h ../include/openssl/objects.h
-s_socket.o: ../include/openssl/ocsp.h ../include/openssl/opensslconf.h
-s_socket.o: ../include/openssl/opensslv.h ../include/openssl/ossl_typ.h
-s_socket.o: ../include/openssl/pem.h ../include/openssl/pem2.h
-s_socket.o: ../include/openssl/pkcs7.h ../include/openssl/pqueue.h
-s_socket.o: ../include/openssl/safestack.h ../include/openssl/sha.h
+s_socket.o: ../e_os.h ../e_os2.h ../include/openssl/asn1.h
+s_socket.o: ../include/openssl/bio.h ../include/openssl/buffer.h
+s_socket.o: ../include/openssl/comp.h ../include/openssl/conf.h
+s_socket.o: ../include/openssl/crypto.h ../include/openssl/dtls1.h
+s_socket.o: ../include/openssl/e_os2.h ../include/openssl/ec.h
+s_socket.o: ../include/openssl/ecdh.h ../include/openssl/ecdsa.h
+s_socket.o: ../include/openssl/engine.h ../include/openssl/evp.h
+s_socket.o: ../include/openssl/hmac.h ../include/openssl/kssl.h
+s_socket.o: ../include/openssl/lhash.h ../include/openssl/obj_mac.h
+s_socket.o: ../include/openssl/objects.h ../include/openssl/ocsp.h
+s_socket.o: ../include/openssl/opensslconf.h ../include/openssl/opensslv.h
+s_socket.o: ../include/openssl/ossl_typ.h ../include/openssl/pem.h
+s_socket.o: ../include/openssl/pem2.h ../include/openssl/pkcs7.h
+s_socket.o: ../include/openssl/pqueue.h ../include/openssl/safestack.h
+s_socket.o: ../include/openssl/sha.h ../include/openssl/srtp.h
 s_socket.o: ../include/openssl/ssl.h ../include/openssl/ssl2.h
 s_socket.o: ../include/openssl/ssl23.h ../include/openssl/ssl3.h
 s_socket.o: ../include/openssl/stack.h ../include/openssl/symhacks.h
@@ -877,13 +883,13 @@ s_time.o: ../include/openssl/opensslconf.h ../include/openssl/opensslv.h
 s_time.o: ../include/openssl/ossl_typ.h ../include/openssl/pem.h
 s_time.o: ../include/openssl/pem2.h ../include/openssl/pkcs7.h
 s_time.o: ../include/openssl/pqueue.h ../include/openssl/safestack.h
-s_time.o: ../include/openssl/sha.h ../include/openssl/ssl.h
-s_time.o: ../include/openssl/ssl2.h ../include/openssl/ssl23.h
-s_time.o: ../include/openssl/ssl3.h ../include/openssl/stack.h
-s_time.o: ../include/openssl/symhacks.h ../include/openssl/tls1.h
-s_time.o: ../include/openssl/txt_db.h ../include/openssl/x509.h
-s_time.o: ../include/openssl/x509_vfy.h ../include/openssl/x509v3.h apps.h
-s_time.o: s_apps.h s_time.c
+s_time.o: ../include/openssl/sha.h ../include/openssl/srtp.h
+s_time.o: ../include/openssl/ssl.h ../include/openssl/ssl2.h
+s_time.o: ../include/openssl/ssl23.h ../include/openssl/ssl3.h
+s_time.o: ../include/openssl/stack.h ../include/openssl/symhacks.h
+s_time.o: ../include/openssl/tls1.h ../include/openssl/txt_db.h
+s_time.o: ../include/openssl/x509.h ../include/openssl/x509_vfy.h
+s_time.o: ../include/openssl/x509v3.h apps.h s_apps.h s_time.c
 sess_id.o: ../e_os.h ../include/openssl/asn1.h ../include/openssl/bio.h
 sess_id.o: ../include/openssl/buffer.h ../include/openssl/comp.h
 sess_id.o: ../include/openssl/conf.h ../include/openssl/crypto.h
@@ -898,13 +904,13 @@ sess_id.o: ../include/openssl/opensslconf.h ../include/openssl/opensslv.h
 sess_id.o: ../include/openssl/ossl_typ.h ../include/openssl/pem.h
 sess_id.o: ../include/openssl/pem2.h ../include/openssl/pkcs7.h
 sess_id.o: ../include/openssl/pqueue.h ../include/openssl/safestack.h
-sess_id.o: ../include/openssl/sha.h ../include/openssl/ssl.h
-sess_id.o: ../include/openssl/ssl2.h ../include/openssl/ssl23.h
-sess_id.o: ../include/openssl/ssl3.h ../include/openssl/stack.h
-sess_id.o: ../include/openssl/symhacks.h ../include/openssl/tls1.h
-sess_id.o: ../include/openssl/txt_db.h ../include/openssl/x509.h
-sess_id.o: ../include/openssl/x509_vfy.h ../include/openssl/x509v3.h apps.h
-sess_id.o: sess_id.c
+sess_id.o: ../include/openssl/sha.h ../include/openssl/srtp.h
+sess_id.o: ../include/openssl/ssl.h ../include/openssl/ssl2.h
+sess_id.o: ../include/openssl/ssl23.h ../include/openssl/ssl3.h
+sess_id.o: ../include/openssl/stack.h ../include/openssl/symhacks.h
+sess_id.o: ../include/openssl/tls1.h ../include/openssl/txt_db.h
+sess_id.o: ../include/openssl/x509.h ../include/openssl/x509_vfy.h
+sess_id.o: ../include/openssl/x509v3.h apps.h sess_id.c
 smime.o: ../e_os.h ../include/openssl/asn1.h ../include/openssl/bio.h
 smime.o: ../include/openssl/buffer.h ../include/openssl/conf.h
 smime.o: ../include/openssl/crypto.h ../include/openssl/e_os2.h
@@ -932,21 +938,21 @@ speed.o: ../include/openssl/ec.h ../include/openssl/ecdh.h
 speed.o: ../include/openssl/ecdsa.h ../include/openssl/engine.h
 speed.o: ../include/openssl/err.h ../include/openssl/evp.h
 speed.o: ../include/openssl/hmac.h ../include/openssl/idea.h
-speed.o: ../include/openssl/lhash.h ../include/openssl/md2.h
-speed.o: ../include/openssl/md4.h ../include/openssl/md5.h
-speed.o: ../include/openssl/obj_mac.h ../include/openssl/objects.h
-speed.o: ../include/openssl/ocsp.h ../include/openssl/opensslconf.h
-speed.o: ../include/openssl/opensslv.h ../include/openssl/ossl_typ.h
-speed.o: ../include/openssl/pkcs7.h ../include/openssl/rand.h
-speed.o: ../include/openssl/rc2.h ../include/openssl/rc4.h
-speed.o: ../include/openssl/ripemd.h ../include/openssl/rsa.h
-speed.o: ../include/openssl/safestack.h ../include/openssl/seed.h
-speed.o: ../include/openssl/sha.h ../include/openssl/stack.h
-speed.o: ../include/openssl/symhacks.h ../include/openssl/txt_db.h
-speed.o: ../include/openssl/ui.h ../include/openssl/ui_compat.h
-speed.o: ../include/openssl/whrlpool.h ../include/openssl/x509.h
-speed.o: ../include/openssl/x509_vfy.h ../include/openssl/x509v3.h apps.h
-speed.o: speed.c testdsa.h testrsa.h
+speed.o: ../include/openssl/lhash.h ../include/openssl/md4.h
+speed.o: ../include/openssl/md5.h ../include/openssl/mdc2.h
+speed.o: ../include/openssl/modes.h ../include/openssl/obj_mac.h
+speed.o: ../include/openssl/objects.h ../include/openssl/ocsp.h
+speed.o: ../include/openssl/opensslconf.h ../include/openssl/opensslv.h
+speed.o: ../include/openssl/ossl_typ.h ../include/openssl/pkcs7.h
+speed.o: ../include/openssl/rand.h ../include/openssl/rc2.h
+speed.o: ../include/openssl/rc4.h ../include/openssl/ripemd.h
+speed.o: ../include/openssl/rsa.h ../include/openssl/safestack.h
+speed.o: ../include/openssl/seed.h ../include/openssl/sha.h
+speed.o: ../include/openssl/stack.h ../include/openssl/symhacks.h
+speed.o: ../include/openssl/txt_db.h ../include/openssl/ui.h
+speed.o: ../include/openssl/ui_compat.h ../include/openssl/whrlpool.h
+speed.o: ../include/openssl/x509.h ../include/openssl/x509_vfy.h
+speed.o: ../include/openssl/x509v3.h apps.h speed.c testdsa.h testrsa.h
 spkac.o: ../e_os.h ../include/openssl/asn1.h ../include/openssl/bio.h
 spkac.o: ../include/openssl/buffer.h ../include/openssl/conf.h
 spkac.o: ../include/openssl/crypto.h ../include/openssl/e_os2.h
@@ -963,6 +969,21 @@ spkac.o: ../include/openssl/stack.h ../include/openssl/symhacks.h
 spkac.o: ../include/openssl/txt_db.h ../include/openssl/x509.h
 spkac.o: ../include/openssl/x509_vfy.h ../include/openssl/x509v3.h apps.h
 spkac.o: spkac.c
+srp.o: ../e_os.h ../include/openssl/asn1.h ../include/openssl/bio.h
+srp.o: ../include/openssl/bn.h ../include/openssl/buffer.h
+srp.o: ../include/openssl/conf.h ../include/openssl/crypto.h
+srp.o: ../include/openssl/e_os2.h ../include/openssl/ec.h
+srp.o: ../include/openssl/ecdh.h ../include/openssl/ecdsa.h
+srp.o: ../include/openssl/engine.h ../include/openssl/err.h
+srp.o: ../include/openssl/evp.h ../include/openssl/lhash.h
+srp.o: ../include/openssl/obj_mac.h ../include/openssl/objects.h
+srp.o: ../include/openssl/ocsp.h ../include/openssl/opensslconf.h
+srp.o: ../include/openssl/opensslv.h ../include/openssl/ossl_typ.h
+srp.o: ../include/openssl/pkcs7.h ../include/openssl/safestack.h
+srp.o: ../include/openssl/sha.h ../include/openssl/srp.h
+srp.o: ../include/openssl/stack.h ../include/openssl/symhacks.h
+srp.o: ../include/openssl/txt_db.h ../include/openssl/x509.h
+srp.o: ../include/openssl/x509_vfy.h ../include/openssl/x509v3.h apps.h srp.c
 ts.o: ../e_os.h ../include/openssl/asn1.h ../include/openssl/bio.h
 ts.o: ../include/openssl/bn.h ../include/openssl/buffer.h
 ts.o: ../include/openssl/conf.h ../include/openssl/crypto.h
@@ -1005,17 +1026,16 @@ version.o: ../include/openssl/des_old.h ../include/openssl/e_os2.h
 version.o: ../include/openssl/ec.h ../include/openssl/ecdh.h
 version.o: ../include/openssl/ecdsa.h ../include/openssl/engine.h
 version.o: ../include/openssl/evp.h ../include/openssl/idea.h
-version.o: ../include/openssl/lhash.h ../include/openssl/md2.h
-version.o: ../include/openssl/obj_mac.h ../include/openssl/objects.h
-version.o: ../include/openssl/ocsp.h ../include/openssl/opensslconf.h
-version.o: ../include/openssl/opensslv.h ../include/openssl/ossl_typ.h
-version.o: ../include/openssl/pkcs7.h ../include/openssl/rc4.h
-version.o: ../include/openssl/safestack.h ../include/openssl/sha.h
-version.o: ../include/openssl/stack.h ../include/openssl/symhacks.h
-version.o: ../include/openssl/txt_db.h ../include/openssl/ui.h
-version.o: ../include/openssl/ui_compat.h ../include/openssl/x509.h
-version.o: ../include/openssl/x509_vfy.h ../include/openssl/x509v3.h apps.h
-version.o: version.c
+version.o: ../include/openssl/lhash.h ../include/openssl/obj_mac.h
+version.o: ../include/openssl/objects.h ../include/openssl/ocsp.h
+version.o: ../include/openssl/opensslconf.h ../include/openssl/opensslv.h
+version.o: ../include/openssl/ossl_typ.h ../include/openssl/pkcs7.h
+version.o: ../include/openssl/rc4.h ../include/openssl/safestack.h
+version.o: ../include/openssl/sha.h ../include/openssl/stack.h
+version.o: ../include/openssl/symhacks.h ../include/openssl/txt_db.h
+version.o: ../include/openssl/ui.h ../include/openssl/ui_compat.h
+version.o: ../include/openssl/x509.h ../include/openssl/x509_vfy.h
+version.o: ../include/openssl/x509v3.h apps.h version.c
 x509.o: ../e_os.h ../include/openssl/asn1.h ../include/openssl/bio.h
 x509.o: ../include/openssl/bn.h ../include/openssl/buffer.h
 x509.o: ../include/openssl/conf.h ../include/openssl/crypto.h

apps/apps.c

@@ -109,14 +109,16 @@
  *
  */
 
+#if !defined(_POSIX_C_SOURCE) && defined(OPENSSL_SYS_VMS)
 #define _POSIX_C_SOURCE 2	/* On VMS, you need to define this to get
 				   the declaration of fileno().  The value
 				   2 is to make sure no function defined
 				   in POSIX-2 is left undefined. */
+#endif
 #include <stdio.h>
 #include <stdlib.h>
 #include <string.h>
-#ifndef OPENSSL_SYSNAME_WIN32
+#if !defined(OPENSSL_SYSNAME_WIN32) && !defined(NETWARE_CLIB)
 #include <strings.h>
 #endif
 #include <sys/types.h>
@@ -255,17 +257,12 @@ int args_from_file(char *file, int *argc, char **argv[])
 
 int str2fmt(char *s)
 	{
+	if (s == NULL)
+		return FORMAT_UNDEF;
 	if 	((*s == 'D') || (*s == 'd'))
 		return(FORMAT_ASN1);
 	else if ((*s == 'T') || (*s == 't'))
 		return(FORMAT_TEXT);
-	else if ((*s == 'P') || (*s == 'p'))
- 		{
- 		if (s[1] == 'V' || s[1] == 'v')
- 			return FORMAT_PVK;
- 		else
-  			return(FORMAT_PEM);
- 		}
   	else if ((*s == 'N') || (*s == 'n'))
   		return(FORMAT_NETSCAPE);
   	else if ((*s == 'S') || (*s == 's'))
@@ -278,6 +275,13 @@ int str2fmt(char *s)
 		return(FORMAT_PKCS12);
 	else if ((*s == 'E') || (*s == 'e'))
 		return(FORMAT_ENGINE);
+	else if ((*s == 'P') || (*s == 'p'))
+ 		{
+ 		if (s[1] == 'V' || s[1] == 'v')
+ 			return FORMAT_PVK;
+ 		else
+  			return(FORMAT_PEM);
+ 		}
 	else
 		return(FORMAT_UNDEF);
 	}
@@ -375,13 +379,12 @@ void program_name(char *in, char *out, int size)
 
 int chopup_args(ARGS *arg, char *buf, int *argc, char **argv[])
 	{
-	int num,len,i;
+	int num,i;
 	char *p;
 
 	*argc=0;
 	*argv=NULL;
 
-	len=strlen(buf);
 	i=0;
 	if (arg->count == 0)
 		{
@@ -795,7 +798,9 @@ X509 *load_cert(BIO *err, const char *file, int format,
 	if (file == NULL)
 		{
 #ifdef _IONBF
+# ifndef OPENSSL_NO_SETVBUF_IONBF
 		setvbuf(stdin, NULL, _IONBF, 0);
+# endif /* ndef OPENSSL_NO_SETVBUF_IONBF */
 #endif
 		BIO_set_fp(cert,stdin,BIO_NOCLOSE);
 		}
@@ -873,10 +878,17 @@ EVP_PKEY *load_key(BIO *err, const char *file, int format, int maybe_stdin,
 	if (format == FORMAT_ENGINE)
 		{
 		if (!e)
-			BIO_printf(bio_err,"no engine specified\n");
+			BIO_printf(err,"no engine specified\n");
 		else
+			{
 			pkey = ENGINE_load_private_key(e, file,
 				ui_method, &cb_data);
+			if (!pkey) 
+				{
+				BIO_printf(err,"cannot load %s from engine\n",key_descrip);
+				ERR_print_errors(err);
+				}	
+			}
 		goto end;
 		}
 #endif
@@ -889,7 +901,9 @@ EVP_PKEY *load_key(BIO *err, const char *file, int format, int maybe_stdin,
 	if (file == NULL && maybe_stdin)
 		{
 #ifdef _IONBF
+# ifndef OPENSSL_NO_SETVBUF_IONBF
 		setvbuf(stdin, NULL, _IONBF, 0);
+# endif /* ndef OPENSSL_NO_SETVBUF_IONBF */
 #endif
 		BIO_set_fp(key,stdin,BIO_NOCLOSE);
 		}
@@ -921,11 +935,13 @@ EVP_PKEY *load_key(BIO *err, const char *file, int format, int maybe_stdin,
 				&pkey, NULL, NULL))
 			goto end;
 		}
+#if !defined(OPENSSL_NO_RSA) && !defined(OPENSSL_NO_DSA) && !defined (OPENSSL_NO_RC4)
 	else if (format == FORMAT_MSBLOB)
 		pkey = b2i_PrivateKey_bio(key);
 	else if (format == FORMAT_PVK)
 		pkey = b2i_PVK_bio(key, (pem_password_cb *)password_callback,
 								&cb_data);
+#endif
 	else
 		{
 		BIO_printf(err,"bad input format specified for key file\n");
@@ -933,8 +949,11 @@ EVP_PKEY *load_key(BIO *err, const char *file, int format, int maybe_stdin,
 		}
  end:
 	if (key != NULL) BIO_free(key);
-	if (pkey == NULL)
+	if (pkey == NULL) 
+		{
 		BIO_printf(err,"unable to load %s\n", key_descrip);
+		ERR_print_errors(err);
+		}	
 	return(pkey);
 	}
 
@@ -973,7 +992,9 @@ EVP_PKEY *load_pubkey(BIO *err, const char *file, int format, int maybe_stdin,
 	if (file == NULL && maybe_stdin)
 		{
 #ifdef _IONBF
+# ifndef OPENSSL_NO_SETVBUF_IONBF
 		setvbuf(stdin, NULL, _IONBF, 0);
+# endif /* ndef OPENSSL_NO_SETVBUF_IONBF */
 #endif
 		BIO_set_fp(key,stdin,BIO_NOCLOSE);
 		}
@@ -989,6 +1010,7 @@ EVP_PKEY *load_pubkey(BIO *err, const char *file, int format, int maybe_stdin,
 		{
 		pkey=d2i_PUBKEY_bio(key, NULL);
 		}
+#ifndef OPENSSL_NO_RSA
 	else if (format == FORMAT_ASN1RSA)
 		{
 		RSA *rsa;
@@ -1018,7 +1040,7 @@ EVP_PKEY *load_pubkey(BIO *err, const char *file, int format, int maybe_stdin,
 		else
 			pkey = NULL;
 		}
-
+#endif
 	else if (format == FORMAT_PEM)
 		{
 		pkey=PEM_read_bio_PUBKEY(key,NULL,
@@ -1028,8 +1050,10 @@ EVP_PKEY *load_pubkey(BIO *err, const char *file, int format, int maybe_stdin,
 	else if (format == FORMAT_NETSCAPE || format == FORMAT_IISSGC)
 		pkey = load_netscape_key(err, key, file, key_descrip, format);
 #endif
+#if !defined(OPENSSL_NO_RSA) && !defined(OPENSSL_NO_DSA)
 	else if (format == FORMAT_MSBLOB)
 		pkey = b2i_PublicKey_bio(key);
+#endif
 	else
 		{
 		BIO_printf(err,"bad input format specified for key file\n");
@@ -1088,76 +1112,122 @@ error:
 	}
 #endif /* ndef OPENSSL_NO_RC4 */
 
-STACK_OF(X509) *load_certs(BIO *err, const char *file, int format,
-	const char *pass, ENGINE *e, const char *cert_descrip)
+static int load_certs_crls(BIO *err, const char *file, int format,
+	const char *pass, ENGINE *e, const char *desc,
+	STACK_OF(X509) **pcerts, STACK_OF(X509_CRL) **pcrls)
 	{
-	BIO *certs;
 	int i;
-	STACK_OF(X509) *othercerts = NULL;
-	STACK_OF(X509_INFO) *allcerts = NULL;
+	BIO *bio;
+	STACK_OF(X509_INFO) *xis = NULL;
 	X509_INFO *xi;
 	PW_CB_DATA cb_data;
+	int rv = 0;
 
 	cb_data.password = pass;
 	cb_data.prompt_info = file;
 
-	if((certs = BIO_new(BIO_s_file())) == NULL)
+	if (format != FORMAT_PEM)
 		{
-		ERR_print_errors(err);
-		goto end;
+		BIO_printf(err,"bad input format specified for %s\n", desc);
+		return 0;
 		}
 
 	if (file == NULL)
-		BIO_set_fp(certs,stdin,BIO_NOCLOSE);
+		bio = BIO_new_fp(stdin,BIO_NOCLOSE);
 	else
+		bio = BIO_new_file(file, "r");
+
+	if (bio == NULL)
 		{
-		if (BIO_read_filename(certs,file) <= 0)
-			{
-			BIO_printf(err, "Error opening %s %s\n",
-				cert_descrip, file);
-			ERR_print_errors(err);
+		BIO_printf(err, "Error opening %s %s\n",
+				desc, file ? file : "stdin");
+		ERR_print_errors(err);
+		return 0;
+		}
+
+	xis = PEM_X509_INFO_read_bio(bio, NULL,
+				(pem_password_cb *)password_callback, &cb_data);
+
+	BIO_free(bio);
+
+	if (pcerts)
+		{
+		*pcerts = sk_X509_new_null();
+		if (!*pcerts)
 			goto end;
+		}
+
+	if (pcrls)
+		{
+		*pcrls = sk_X509_CRL_new_null();
+		if (!*pcrls)
+			goto end;
+		}
+
+	for(i = 0; i < sk_X509_INFO_num(xis); i++)
+		{
+		xi = sk_X509_INFO_value (xis, i);
+		if (xi->x509 && pcerts)
+			{
+			if (!sk_X509_push(*pcerts, xi->x509))
+				goto end;
+			xi->x509 = NULL;
+			}
+		if (xi->crl && pcrls)
+			{
+			if (!sk_X509_CRL_push(*pcrls, xi->crl))
+				goto end;
+			xi->crl = NULL;
 			}
 		}
 
-	if      (format == FORMAT_PEM)
+	if (pcerts && sk_X509_num(*pcerts) > 0)
+		rv = 1;
+
+	if (pcrls && sk_X509_CRL_num(*pcrls) > 0)
+		rv = 1;
+
+	end:
+
+	if (xis)
+		sk_X509_INFO_pop_free(xis, X509_INFO_free);
+
+	if (rv == 0)
 		{
-		othercerts = sk_X509_new_null();
-		if(!othercerts)
+		if (pcerts)
 			{
-			sk_X509_free(othercerts);
-			othercerts = NULL;
-			goto end;
+			sk_X509_pop_free(*pcerts, X509_free);
+			*pcerts = NULL;
 			}
-		allcerts = PEM_X509_INFO_read_bio(certs, NULL,
-				(pem_password_cb *)password_callback, &cb_data);
-		for(i = 0; i < sk_X509_INFO_num(allcerts); i++)
+		if (pcrls)
 			{
-			xi = sk_X509_INFO_value (allcerts, i);
-			if (xi->x509)
-				{
-				sk_X509_push(othercerts, xi->x509);
-				xi->x509 = NULL;
-				}
+			sk_X509_CRL_pop_free(*pcrls, X509_CRL_free);
+			*pcrls = NULL;
 			}
-		goto end;
-		}
-	else	{
-		BIO_printf(err,"bad input format specified for %s\n",
-			cert_descrip);
-		goto end;
-		}
-end:
-	if (othercerts == NULL)
-		{
-		BIO_printf(err,"unable to load certificates\n");
+		BIO_printf(err,"unable to load %s\n",
+				pcerts ? "certificates" : "CRLs");
 		ERR_print_errors(err);
 		}
-	if (allcerts) sk_X509_INFO_pop_free(allcerts, X509_INFO_free);
-	if (certs != NULL) BIO_free(certs);
-	return(othercerts);
+	return rv;
 	}
 
+STACK_OF(X509) *load_certs(BIO *err, const char *file, int format,
+	const char *pass, ENGINE *e, const char *desc)
+	{
+	STACK_OF(X509) *certs;
+	if (!load_certs_crls(err, file, format, pass, e, desc, &certs, NULL))
+		return NULL;
+	return certs;
+	}	
+
+STACK_OF(X509_CRL) *load_crls(BIO *err, const char *file, int format,
+	const char *pass, ENGINE *e, const char *desc)
+	{
+	STACK_OF(X509_CRL) *crls;
+	if (!load_certs_crls(err, file, format, pass, e, desc, NULL, &crls))
+		return NULL;
+	return crls;
+	}	
 
 #define X509V3_EXT_UNKNOWN_MASK		(0xfL << 16)
 /* Return error for unknown extensions */
@@ -1481,7 +1551,7 @@ char *make_config_name()
 	return p;
 	}
 
-static unsigned long index_serial_hash(const CSTRING *a)
+static unsigned long index_serial_hash(const OPENSSL_CSTRING *a)
 	{
 	const char *n;
 
@@ -1490,7 +1560,7 @@ static unsigned long index_serial_hash(const CSTRING *a)
 	return(lh_strhash(n));
 	}
 
-static int index_serial_cmp(const CSTRING *a, const CSTRING *b)
+static int index_serial_cmp(const OPENSSL_CSTRING *a, const OPENSSL_CSTRING *b)
 	{
 	const char *aa,*bb;
 
@@ -1502,16 +1572,16 @@ static int index_serial_cmp(const CSTRING *a, const CSTRING *b)
 static int index_name_qual(char **a)
 	{ return(a[0][0] == 'V'); }
 
-static unsigned long index_name_hash(const CSTRING *a)
+static unsigned long index_name_hash(const OPENSSL_CSTRING *a)
 	{ return(lh_strhash(a[DB_name])); }
 
-int index_name_cmp(const CSTRING *a, const CSTRING *b)
+int index_name_cmp(const OPENSSL_CSTRING *a, const OPENSSL_CSTRING *b)
 	{ return(strcmp(a[DB_name], b[DB_name])); }
 
-static IMPLEMENT_LHASH_HASH_FN(index_serial, CSTRING)
-static IMPLEMENT_LHASH_COMP_FN(index_serial, CSTRING)
-static IMPLEMENT_LHASH_HASH_FN(index_name, CSTRING)
-static IMPLEMENT_LHASH_COMP_FN(index_name, CSTRING)
+static IMPLEMENT_LHASH_HASH_FN(index_serial, OPENSSL_CSTRING)
+static IMPLEMENT_LHASH_COMP_FN(index_serial, OPENSSL_CSTRING)
+static IMPLEMENT_LHASH_HASH_FN(index_name, OPENSSL_CSTRING)
+static IMPLEMENT_LHASH_COMP_FN(index_name, OPENSSL_CSTRING)
 
 #undef BSIZE
 #define BSIZE 256
@@ -2185,9 +2255,10 @@ int args_verify(char ***pargs, int *pargc,
 	ASN1_OBJECT *otmp = NULL;
 	unsigned long flags = 0;
 	int i;
-	int purpose = 0;
+	int purpose = 0, depth = -1;
 	char **oldargs = *pargs;
 	char *arg = **pargs, *argn = (*pargs)[1];
+	time_t at_time = 0;
 	if (!strcmp(arg, "-policy"))
 		{
 		if (!argn)
@@ -2225,6 +2296,42 @@ int args_verify(char ***pargs, int *pargc,
 			}
 		(*pargs)++;
 		}
+	else if (strcmp(arg,"-verify_depth") == 0)
+		{
+		if (!argn)
+			*badarg = 1;
+		else
+			{
+			depth = atoi(argn);
+			if(depth < 0)
+				{
+				BIO_printf(err, "invalid depth\n");
+				*badarg = 1;
+				}
+			}
+		(*pargs)++;
+		}
+	else if (strcmp(arg,"-attime") == 0)
+		{
+		if (!argn)
+			*badarg = 1;
+		else
+			{
+			long timestamp;
+			/* interpret the -attime argument as seconds since
+			 * Epoch */
+			if (sscanf(argn, "%li", &timestamp) != 1)
+				{
+				BIO_printf(bio_err,
+						"Error parsing timestamp %s\n",
+					   	argn);
+				*badarg = 1;
+				}
+			/* on some platforms time_t may be a float */
+			at_time = (time_t) timestamp;
+			}
+		(*pargs)++;
+		}
 	else if (!strcmp(arg, "-ignore_critical"))
 		flags |= X509_V_FLAG_IGNORE_CRITICAL;
 	else if (!strcmp(arg, "-issuer_checks"))
@@ -2249,6 +2356,8 @@ int args_verify(char ***pargs, int *pargc,
 		flags |= X509_V_FLAG_USE_DELTAS;
 	else if (!strcmp(arg, "-policy_print"))
 		flags |= X509_V_FLAG_NOTIFY_POLICY;
+	else if (!strcmp(arg, "-check_ss_sig"))
+		flags |= X509_V_FLAG_CHECK_SS_SIGNATURE;
 	else
 		return 0;
 
@@ -2274,6 +2383,12 @@ int args_verify(char ***pargs, int *pargc,
 	if (purpose)
 		X509_VERIFY_PARAM_set_purpose(*pm, purpose);
 
+	if (depth >= 0)
+		X509_VERIFY_PARAM_set_depth(*pm, depth);
+
+	if (at_time) 
+		X509_VERIFY_PARAM_set_time(*pm, at_time);
+
 	end:
 
 	(*pargs)++;
@@ -2605,6 +2720,50 @@ void jpake_server_auth(BIO *out, BIO *conn, const char *secret)
 
 #endif
 
+#if !defined(OPENSSL_NO_TLSEXT) && !defined(OPENSSL_NO_NEXTPROTONEG)
+/* next_protos_parse parses a comma separated list of strings into a string
+ * in a format suitable for passing to SSL_CTX_set_next_protos_advertised.
+ *   outlen: (output) set to the length of the resulting buffer on success.
+ *   err: (maybe NULL) on failure, an error message line is written to this BIO.
+ *   in: a NUL termianted string like "abc,def,ghi"
+ *
+ *   returns: a malloced buffer or NULL on failure.
+ */
+unsigned char *next_protos_parse(unsigned short *outlen, const char *in)
+	{
+	size_t len;
+	unsigned char *out;
+	size_t i, start = 0;
+
+	len = strlen(in);
+	if (len >= 65535)
+		return NULL;
+
+	out = OPENSSL_malloc(strlen(in) + 1);
+	if (!out)
+		return NULL;
+
+	for (i = 0; i <= len; ++i)
+		{
+		if (i == len || in[i] == ',')
+			{
+			if (i - start > 255)
+				{
+				OPENSSL_free(out);
+				return NULL;
+				}
+			out[start] = i - start;
+			start = i + 1;
+			}
+		else
+			out[i+1] = in[i];
+		}
+
+	*outlen = len + 1;
+	return out;
+	}
+#endif  /* !OPENSSL_NO_TLSEXT && !OPENSSL_NO_NEXTPROTONEG */
+
 /*
  * Platform-specific sections
  */

apps/apps.h

@@ -168,6 +168,12 @@ extern BIO *bio_err;
 #define do_pipe_sig()
 #endif
 
+#ifdef OPENSSL_NO_COMP
+#define zlib_cleanup() 
+#else
+#define zlib_cleanup() COMP_zlib_cleanup()
+#endif
+
 #if defined(MONOLITH) && !defined(OPENSSL_C)
 #  define apps_startup() \
 		do_pipe_sig()
@@ -182,7 +188,7 @@ extern BIO *bio_err;
 			do { CONF_modules_unload(1); destroy_ui_method(); \
 			OBJ_cleanup(); EVP_cleanup(); ENGINE_cleanup(); \
 			CRYPTO_cleanup_all_ex_data(); ERR_remove_thread_state(NULL); \
-			ERR_free_strings(); COMP_zlib_cleanup();} while(0)
+			ERR_free_strings(); zlib_cleanup();} while(0)
 #  else
 #    define apps_startup() \
 			do { do_pipe_sig(); CRYPTO_malloc_init(); \
@@ -192,7 +198,7 @@ extern BIO *bio_err;
 			do { CONF_modules_unload(1); destroy_ui_method(); \
 			OBJ_cleanup(); EVP_cleanup(); \
 			CRYPTO_cleanup_all_ex_data(); ERR_remove_thread_state(NULL); \
-			ERR_free_strings(); } while(0)
+			ERR_free_strings(); zlib_cleanup(); } while(0)
 #  endif
 #endif
 
@@ -245,6 +251,8 @@ EVP_PKEY *load_pubkey(BIO *err, const char *file, int format, int maybe_stdin,
 	const char *pass, ENGINE *e, const char *key_descrip);
 STACK_OF(X509) *load_certs(BIO *err, const char *file, int format,
 	const char *pass, ENGINE *e, const char *cert_descrip);
+STACK_OF(X509_CRL) *load_crls(BIO *err, const char *file, int format,
+	const char *pass, ENGINE *e, const char *cert_descrip);
 X509_STORE *setup_verify(BIO *bp, char *CAfile, char *CApath);
 #ifndef OPENSSL_NO_ENGINE
 ENGINE *setup_engine(BIO *err, const char *engine, int debug);
@@ -253,6 +261,7 @@ ENGINE *setup_engine(BIO *err, const char *engine, int debug);
 #ifndef OPENSSL_NO_OCSP
 OCSP_RESPONSE *process_responder(BIO *err, OCSP_REQUEST *req,
 			char *host, char *path, char *port, int use_ssl,
+			STACK_OF(CONF_VALUE) *headers,
 			int req_timeout);
 #endif
 
@@ -295,9 +304,9 @@ int save_index(const char *dbfile, const char *suffix, CA_DB *db);
 int rotate_index(const char *dbfile, const char *new_suffix, const char *old_suffix);
 void free_index(CA_DB *db);
 #define index_name_cmp_noconst(a, b) \
-	index_name_cmp((const CSTRING *)CHECKED_PTR_OF(STRING, a), \
-	(const CSTRING *)CHECKED_PTR_OF(STRING, b))
-int index_name_cmp(const CSTRING *a, const CSTRING *b);
+	index_name_cmp((const OPENSSL_CSTRING *)CHECKED_PTR_OF(OPENSSL_STRING, a), \
+	(const OPENSSL_CSTRING *)CHECKED_PTR_OF(OPENSSL_STRING, b))
+int index_name_cmp(const OPENSSL_CSTRING *a, const OPENSSL_CSTRING *b);
 int parse_yesno(const char *str, int def);
 
 X509_NAME *parse_name(char *str, long chtype, int multirdn);
@@ -308,6 +317,12 @@ int bio_to_mem(unsigned char **out, int maxlen, BIO *in);
 int pkey_ctrl_string(EVP_PKEY_CTX *ctx, char *value);
 int init_gen_str(BIO *err, EVP_PKEY_CTX **pctx,
 			const char *algname, ENGINE *e, int do_param);
+int do_X509_sign(BIO *err, X509 *x, EVP_PKEY *pkey, const EVP_MD *md,
+			STACK_OF(OPENSSL_STRING) *sigopts);
+int do_X509_REQ_sign(BIO *err, X509_REQ *x, EVP_PKEY *pkey, const EVP_MD *md,
+			STACK_OF(OPENSSL_STRING) *sigopts);
+int do_X509_CRL_sign(BIO *err, X509_CRL *x, EVP_PKEY *pkey, const EVP_MD *md,
+			STACK_OF(OPENSSL_STRING) *sigopts);
 #ifndef OPENSSL_NO_PSK
 extern char *psk_key;
 #endif
@@ -316,6 +331,10 @@ void jpake_client_auth(BIO *out, BIO *conn, const char *secret);
 void jpake_server_auth(BIO *out, BIO *conn, const char *secret);
 #endif
 
+#if !defined(OPENSSL_NO_TLSEXT) && !defined(OPENSSL_NO_NEXTPROTONEG)
+unsigned char *next_protos_parse(unsigned short *outlen, const char *in);
+#endif  /* !OPENSSL_NO_TLSEXT && !OPENSSL_NO_NEXTPROTONEG */
+
 #define FORMAT_UNDEF    0
 #define FORMAT_ASN1     1
 #define FORMAT_TEXT     2
@@ -348,4 +367,7 @@ int raw_write_stdout(const void *,int);
 #define TM_START	0
 #define TM_STOP		1
 double app_tminterval (int stop,int usertime);
+
+#define OPENSSL_NO_SSL_INTERN
+
 #endif

apps/asn1pars.c

@@ -96,7 +96,7 @@ int MAIN(int argc, char **argv)
 	unsigned char *tmpbuf;
 	const unsigned char *ctmpbuf;
 	BUF_MEM *buf=NULL;
-	STACK_OF(STRING) *osk=NULL;
+	STACK_OF(OPENSSL_STRING) *osk=NULL;
 	ASN1_TYPE *at=NULL;
 
 	informat=FORMAT_PEM;
@@ -113,7 +113,7 @@ int MAIN(int argc, char **argv)
 	prog=argv[0];
 	argc--;
 	argv++;
-	if ((osk=sk_STRING_new_null()) == NULL)
+	if ((osk=sk_OPENSSL_STRING_new_null()) == NULL)
 		{
 		BIO_printf(bio_err,"Memory allocation failure\n");
 		goto end;
@@ -169,7 +169,7 @@ int MAIN(int argc, char **argv)
 		else if (strcmp(*argv,"-strparse") == 0)
 			{
 			if (--argc < 1) goto bad;
-			sk_STRING_push(osk,*(++argv));
+			sk_OPENSSL_STRING_push(osk,*(++argv));
 			}
 		else if (strcmp(*argv,"-genstr") == 0)
 			{
@@ -302,18 +302,18 @@ bad:
 
 	/* If any structs to parse go through in sequence */
 
-	if (sk_STRING_num(osk))
+	if (sk_OPENSSL_STRING_num(osk))
 		{
 		tmpbuf=(unsigned char *)str;
 		tmplen=num;
-		for (i=0; i<sk_STRING_num(osk); i++)
+		for (i=0; i<sk_OPENSSL_STRING_num(osk); i++)
 			{
 			ASN1_TYPE *atmp;
 			int typ;
-			j=atoi(sk_STRING_value(osk,i));
+			j=atoi(sk_OPENSSL_STRING_value(osk,i));
 			if (j == 0)
 				{
-				BIO_printf(bio_err,"'%s' is an invalid number\n",sk_STRING_value(osk,i));
+				BIO_printf(bio_err,"'%s' is an invalid number\n",sk_OPENSSL_STRING_value(osk,i));
 				continue;
 				}
 			tmpbuf+=j;
@@ -378,7 +378,7 @@ end:
 		ERR_print_errors(bio_err);
 	if (buf != NULL) BUF_MEM_free(buf);
 	if (at != NULL) ASN1_TYPE_free(at);
-	if (osk != NULL) sk_STRING_free(osk);
+	if (osk != NULL) sk_OPENSSL_STRING_free(osk);
 	OBJ_cleanup();
 	apps_shutdown();
 	OPENSSL_EXIT(ret);
@@ -408,6 +408,7 @@ static int do_generate(BIO *bio, char *genstr, char *genconf, BUF_MEM *buf)
 
 	atyp = ASN1_generate_nconf(genstr, cnf);
 	NCONF_free(cnf);
+	cnf = NULL;
 
 	if (!atyp)
 		return -1;

apps/ca.c

@@ -197,27 +197,30 @@ extern int EF_ALIGNMENT;
 
 static void lookup_fail(const char *name, const char *tag);
 static int certify(X509 **xret, char *infile,EVP_PKEY *pkey,X509 *x509,
-		   const EVP_MD *dgst,STACK_OF(CONF_VALUE) *policy,CA_DB *db,
+		   const EVP_MD *dgst,STACK_OF(OPENSSL_STRING) *sigopts,
+		   STACK_OF(CONF_VALUE) *policy,CA_DB *db,
 		   BIGNUM *serial, char *subj,unsigned long chtype, int multirdn, int email_dn, char *startdate,
 		   char *enddate, long days, int batch, char *ext_sect, CONF *conf,
 		   int verbose, unsigned long certopt, unsigned long nameopt,
 		   int default_op, int ext_copy, int selfsign);
 static int certify_cert(X509 **xret, char *infile,EVP_PKEY *pkey,X509 *x509,
-			const EVP_MD *dgst,STACK_OF(CONF_VALUE) *policy,
+			const EVP_MD *dgst,STACK_OF(OPENSSL_STRING) *sigopts,
+			STACK_OF(CONF_VALUE) *policy,
 			CA_DB *db, BIGNUM *serial, char *subj,unsigned long chtype, int multirdn, int email_dn,
 			char *startdate, char *enddate, long days, int batch,
 			char *ext_sect, CONF *conf,int verbose, unsigned long certopt,
 			unsigned long nameopt, int default_op, int ext_copy,
 			ENGINE *e);
 static int certify_spkac(X509 **xret, char *infile,EVP_PKEY *pkey,X509 *x509,
-			 const EVP_MD *dgst,STACK_OF(CONF_VALUE) *policy,
+			 const EVP_MD *dgst,STACK_OF(OPENSSL_STRING) *sigopts,
+			 STACK_OF(CONF_VALUE) *policy,
 			 CA_DB *db, BIGNUM *serial,char *subj,unsigned long chtype, int multirdn, int email_dn,
 			 char *startdate, char *enddate, long days, char *ext_sect,
 			 CONF *conf, int verbose, unsigned long certopt, 
 			 unsigned long nameopt, int default_op, int ext_copy);
-static int fix_data(int nid, int *type);
 static void write_new_certificate(BIO *bp, X509 *x, int output_der, int notext);
 static int do_body(X509 **xret, EVP_PKEY *pkey, X509 *x509, const EVP_MD *dgst,
+	STACK_OF(OPENSSL_STRING) *sigopts,
 	STACK_OF(CONF_VALUE) *policy, CA_DB *db, BIGNUM *serial,char *subj,unsigned long chtype, int multirdn,
 	int email_dn, char *startdate, char *enddate, long days, int batch,
        	int verbose, X509_REQ *req, char *ext_sect, CONF *conf,
@@ -312,6 +315,7 @@ int MAIN(int argc, char **argv)
 	const EVP_MD *dgst=NULL;
 	STACK_OF(CONF_VALUE) *attribs=NULL;
 	STACK_OF(X509) *cert_sk=NULL;
+	STACK_OF(OPENSSL_STRING) *sigopts = NULL;
 #undef BSIZE
 #define BSIZE 256
 	MS_STATIC char buf[3][BSIZE];
@@ -436,6 +440,15 @@ EF_ALIGNMENT=0;
 			if (--argc < 1) goto bad;
 			outdir= *(++argv);
 			}
+		else if (strcmp(*argv,"-sigopt") == 0)
+			{
+			if (--argc < 1)
+				goto bad;
+			if (!sigopts)
+				sigopts = sk_OPENSSL_STRING_new_null();
+			if (!sigopts || !sk_OPENSSL_STRING_push(sigopts, *(++argv)))
+				goto bad;
+			}
 		else if (strcmp(*argv,"-notext") == 0)
 			notext=1;
 		else if (strcmp(*argv,"-batch") == 0)
@@ -883,9 +896,9 @@ bad:
 	if (db == NULL) goto err;
 
 	/* Lets check some fields */
-	for (i=0; i<sk_PSTRING_num(db->db->data); i++)
+	for (i=0; i<sk_OPENSSL_PSTRING_num(db->db->data); i++)
 		{
-		pp=sk_PSTRING_value(db->db->data,i);
+		pp=sk_OPENSSL_PSTRING_value(db->db->data,i);
 		if ((pp[DB_type][0] != DB_TYPE_REV) &&
 			(pp[DB_rev_date][0] != '\0'))
 			{
@@ -938,7 +951,7 @@ bad:
 #endif
 		TXT_DB_write(out,db->db);
 		BIO_printf(bio_err,"%d entries loaded from the database\n",
-			   sk_PSTRING_num(db->db->data));
+			   sk_OPENSSL_PSTRING_num(db->db->data));
 		BIO_printf(bio_err,"generating index\n");
 		}
 	
@@ -1171,8 +1184,9 @@ bad:
 		if (spkac_file != NULL)
 			{
 			total++;
-			j=certify_spkac(&x,spkac_file,pkey,x509,dgst,attribs,db,
-				serial,subj,chtype,multirdn,email_dn,startdate,enddate,days,extensions,
+			j=certify_spkac(&x,spkac_file,pkey,x509,dgst,sigopts,
+				attribs,db, serial,subj,chtype,multirdn,
+				email_dn,startdate,enddate,days,extensions,
 				conf,verbose,certopt,nameopt,default_op,ext_copy);
 			if (j < 0) goto err;
 			if (j > 0)
@@ -1195,7 +1209,8 @@ bad:
 		if (ss_cert_file != NULL)
 			{
 			total++;
-			j=certify_cert(&x,ss_cert_file,pkey,x509,dgst,attribs,
+			j=certify_cert(&x,ss_cert_file,pkey,x509,dgst,sigopts,
+				attribs,
 				db,serial,subj,chtype,multirdn,email_dn,startdate,enddate,days,batch,
 				extensions,conf,verbose, certopt, nameopt,
 				default_op, ext_copy, e);
@@ -1215,7 +1230,7 @@ bad:
 		if (infile != NULL)
 			{
 			total++;
-			j=certify(&x,infile,pkey,x509p,dgst,attribs,db,
+			j=certify(&x,infile,pkey,x509p,dgst,sigopts, attribs,db,
 				serial,subj,chtype,multirdn,email_dn,startdate,enddate,days,batch,
 				extensions,conf,verbose, certopt, nameopt,
 				default_op, ext_copy, selfsign);
@@ -1235,7 +1250,7 @@ bad:
 		for (i=0; i<argc; i++)
 			{
 			total++;
-			j=certify(&x,argv[i],pkey,x509p,dgst,attribs,db,
+			j=certify(&x,argv[i],pkey,x509p,dgst,sigopts,attribs,db,
 				serial,subj,chtype,multirdn,email_dn,startdate,enddate,days,batch,
 				extensions,conf,verbose, certopt, nameopt,
 				default_op, ext_copy, selfsign);
@@ -1263,7 +1278,12 @@ bad:
 				BIO_printf(bio_err,"\n%d out of %d certificate requests certified, commit? [y/n]",total_done,total);
 				(void)BIO_flush(bio_err);
 				buf[0][0]='\0';
-				fgets(buf[0],10,stdin);
+				if (!fgets(buf[0],10,stdin))
+					{
+					BIO_printf(bio_err,"CERTIFICATION CANCELED: I/O error\n"); 
+					ret=0;
+					goto err;
+					}
 				if ((buf[0][0] != 'y') && (buf[0][0] != 'Y'))
 					{
 					BIO_printf(bio_err,"CERTIFICATION CANCELED\n"); 
@@ -1403,14 +1423,19 @@ bad:
 		if (!tmptm) goto err;
 		X509_gmtime_adj(tmptm,0);
 		X509_CRL_set_lastUpdate(crl, tmptm);	
-		X509_time_adj_ex(tmptm, crldays, crlhours*60*60 + crlsec, NULL);
+		if (!X509_time_adj_ex(tmptm, crldays, crlhours*60*60 + crlsec,
+			NULL))
+			{
+			BIO_puts(bio_err, "error setting CRL nextUpdate\n");
+			goto err;
+			}
 		X509_CRL_set_nextUpdate(crl, tmptm);	
 
 		ASN1_TIME_free(tmptm);
 
-		for (i=0; i<sk_PSTRING_num(db->db->data); i++)
+		for (i=0; i<sk_OPENSSL_PSTRING_num(db->db->data); i++)
 			{
-			pp=sk_PSTRING_value(db->db->data,i);
+			pp=sk_OPENSSL_PSTRING_value(db->db->data,i);
 			if (pp[DB_type][0] == DB_TYPE_REV)
 				{
 				if ((r=X509_REVOKED_new()) == NULL) goto err;
@@ -1474,7 +1499,7 @@ bad:
 			crlnumber = NULL;
 			}
 
-		if (!X509_CRL_sign(crl,pkey,dgst)) goto err;
+		if (!do_X509_CRL_sign(bio_err,crl,pkey,dgst,sigopts)) goto err;
 
 		PEM_write_bio_X509_CRL(Sout,crl);
 
@@ -1528,6 +1553,8 @@ err:
 	BN_free(serial);
 	BN_free(crlnumber);
 	free_index(db);
+	if (sigopts)
+		sk_OPENSSL_STRING_free(sigopts);
 	EVP_PKEY_free(pkey);
 	if (x509) X509_free(x509);
 	X509_CRL_free(crl);
@@ -1544,8 +1571,10 @@ static void lookup_fail(const char *name, const char *tag)
 	}
 
 static int certify(X509 **xret, char *infile, EVP_PKEY *pkey, X509 *x509,
-	     const EVP_MD *dgst, STACK_OF(CONF_VALUE) *policy, CA_DB *db,
-	     BIGNUM *serial, char *subj,unsigned long chtype, int multirdn, int email_dn, char *startdate, char *enddate,
+	     const EVP_MD *dgst, STACK_OF(OPENSSL_STRING) *sigopts,
+	     STACK_OF(CONF_VALUE) *policy, CA_DB *db,
+	     BIGNUM *serial, char *subj,unsigned long chtype, int multirdn,
+	     int email_dn, char *startdate, char *enddate,
 	     long days, int batch, char *ext_sect, CONF *lconf, int verbose,
 	     unsigned long certopt, unsigned long nameopt, int default_op,
 	     int ext_copy, int selfsign)
@@ -1601,7 +1630,8 @@ static int certify(X509 **xret, char *infile, EVP_PKEY *pkey, X509 *x509,
 	else
 		BIO_printf(bio_err,"Signature ok\n");
 
-	ok=do_body(xret,pkey,x509,dgst,policy,db,serial,subj,chtype,multirdn, email_dn,
+	ok=do_body(xret,pkey,x509,dgst,sigopts, policy,db,serial,subj,chtype,
+		multirdn, email_dn,
 		startdate,enddate,days,batch,verbose,req,ext_sect,lconf,
 		certopt, nameopt, default_op, ext_copy, selfsign);
 
@@ -1612,7 +1642,8 @@ err:
 	}
 
 static int certify_cert(X509 **xret, char *infile, EVP_PKEY *pkey, X509 *x509,
-	     const EVP_MD *dgst, STACK_OF(CONF_VALUE) *policy, CA_DB *db,
+	     const EVP_MD *dgst, STACK_OF(OPENSSL_STRING) *sigopts,
+	     STACK_OF(CONF_VALUE) *policy, CA_DB *db,
 	     BIGNUM *serial, char *subj, unsigned long chtype, int multirdn, int email_dn, char *startdate, char *enddate,
 	     long days, int batch, char *ext_sect, CONF *lconf, int verbose,
 	     unsigned long certopt, unsigned long nameopt, int default_op,
@@ -1655,7 +1686,7 @@ static int certify_cert(X509 **xret, char *infile, EVP_PKEY *pkey, X509 *x509,
 	if ((rreq=X509_to_X509_REQ(req,NULL,EVP_md5())) == NULL)
 		goto err;
 
-	ok=do_body(xret,pkey,x509,dgst,policy,db,serial,subj,chtype,multirdn,email_dn,startdate,enddate,
+	ok=do_body(xret,pkey,x509,dgst,sigopts,policy,db,serial,subj,chtype,multirdn,email_dn,startdate,enddate,
 		days,batch,verbose,rreq,ext_sect,lconf, certopt, nameopt, default_op,
 		ext_copy, 0);
 
@@ -1666,7 +1697,8 @@ err:
 	}
 
 static int do_body(X509 **xret, EVP_PKEY *pkey, X509 *x509, const EVP_MD *dgst,
-	     STACK_OF(CONF_VALUE) *policy, CA_DB *db, BIGNUM *serial, char *subj,
+	     STACK_OF(OPENSSL_STRING) *sigopts, STACK_OF(CONF_VALUE) *policy,
+             CA_DB *db, BIGNUM *serial, char *subj,
 	     unsigned long chtype, int multirdn,
 	     int email_dn, char *startdate, char *enddate, long days, int batch,
 	     int verbose, X509_REQ *req, char *ext_sect, CONF *lconf,
@@ -1685,9 +1717,9 @@ static int do_body(X509 **xret, EVP_PKEY *pkey, X509 *x509, const EVP_MD *dgst,
 	int ok= -1,i,j,last,nid;
 	const char *p;
 	CONF_VALUE *cv;
-	STRING row[DB_NUMBER];
-	STRING *irow=NULL;
-	STRING *rrow=NULL;
+	OPENSSL_STRING row[DB_NUMBER];
+	OPENSSL_STRING *irow=NULL;
+	OPENSSL_STRING *rrow=NULL;
 	char buf[25];
 
 	tmptm=ASN1_UTCTIME_new();
@@ -1929,7 +1961,7 @@ again2:
 
 	if (db->attributes.unique_subject)
 		{
-		STRING *crow=row;
+		OPENSSL_STRING *crow=row;
 
 		rrow=TXT_DB_get_by_index(db->db,DB_name,crow);
 		if (rrow != NULL)
@@ -2117,7 +2149,12 @@ again2:
 		BIO_printf(bio_err,"Sign the certificate? [y/n]:");
 		(void)BIO_flush(bio_err);
 		buf[0]='\0';
-		fgets(buf,sizeof(buf)-1,stdin);
+		if (!fgets(buf,sizeof(buf)-1,stdin))
+			{
+			BIO_printf(bio_err,"CERTIFICATE WILL NOT BE CERTIFIED: I/O error\n");
+			ok=0;
+			goto err;
+			}
 		if (!((buf[0] == 'y') || (buf[0] == 'Y')))
 			{
 			BIO_printf(bio_err,"CERTIFICATE WILL NOT BE CERTIFIED\n");
@@ -2132,7 +2169,7 @@ again2:
 		EVP_PKEY_copy_parameters(pktmp,pkey);
 	EVP_PKEY_free(pktmp);
 
-	if (!X509_sign(ret,pkey,dgst))
+	if (!do_X509_sign(bio_err, ret,pkey,dgst, sigopts))
 		goto err;
 
 	/* We now just add it to the database */
@@ -2226,7 +2263,8 @@ static void write_new_certificate(BIO *bp, X509 *x, int output_der, int notext)
 	}
 
 static int certify_spkac(X509 **xret, char *infile, EVP_PKEY *pkey, X509 *x509,
-	     const EVP_MD *dgst, STACK_OF(CONF_VALUE) *policy, CA_DB *db,
+	     const EVP_MD *dgst, STACK_OF(OPENSSL_STRING) *sigopts,
+	     STACK_OF(CONF_VALUE) *policy, CA_DB *db,
 	     BIGNUM *serial, char *subj,unsigned long chtype, int multirdn, int email_dn, char *startdate, char *enddate,
 	     long days, char *ext_sect, CONF *lconf, int verbose, unsigned long certopt,
 	     unsigned long nameopt, int default_op, int ext_copy)
@@ -2319,25 +2357,9 @@ static int certify_spkac(X509 **xret, char *infile, EVP_PKEY *pkey, X509 *x509,
 			continue;
 			}
 
-		/*
-		if ((nid == NID_pkcs9_emailAddress) && (email_dn == 0))
-			continue;
-		*/
-		
-		j=ASN1_PRINTABLE_type((unsigned char *)buf,-1);
-		if (fix_data(nid, &j) == 0)
-			{
-			BIO_printf(bio_err,
-				"invalid characters in string %s\n",buf);
+		if (!X509_NAME_add_entry_by_NID(n, nid, chtype,
+				(unsigned char *)buf, -1, -1, 0))
 			goto err;
-			}
-
-		if ((ne=X509_NAME_ENTRY_create_by_NID(&ne,nid,j,
-			(unsigned char *)buf,
-			strlen(buf))) == NULL)
-			goto err;
-
-		if (!X509_NAME_add_entry(n,ne,-1, 0)) goto err;
 		}
 	if (spki == NULL)
 		{
@@ -2368,9 +2390,9 @@ static int certify_spkac(X509 **xret, char *infile, EVP_PKEY *pkey, X509 *x509,
 
 	X509_REQ_set_pubkey(req,pktmp);
 	EVP_PKEY_free(pktmp);
-	ok=do_body(xret,pkey,x509,dgst,policy,db,serial,subj,chtype,multirdn,email_dn,startdate,enddate,
-		   days,1,verbose,req,ext_sect,lconf, certopt, nameopt, default_op,
-			ext_copy, 0);
+	ok=do_body(xret,pkey,x509,dgst,sigopts,policy,db,serial,subj,chtype,
+		   multirdn,email_dn,startdate,enddate, days,1,verbose,req,
+		   ext_sect,lconf, certopt, nameopt, default_op, ext_copy, 0);
 err:
 	if (req != NULL) X509_REQ_free(req);
 	if (parms != NULL) CONF_free(parms);
@@ -2380,21 +2402,6 @@ err:
 	return(ok);
 	}
 
-static int fix_data(int nid, int *type)
-	{
-	if (nid == NID_pkcs9_emailAddress)
-		*type=V_ASN1_IA5STRING;
-	if ((nid == NID_commonName) && (*type == V_ASN1_IA5STRING))
-		*type=V_ASN1_T61STRING;
-	if ((nid == NID_pkcs9_challengePassword) && (*type == V_ASN1_IA5STRING))
-		*type=V_ASN1_T61STRING;
-	if ((nid == NID_pkcs9_unstructuredName) && (*type == V_ASN1_T61STRING))
-		return(0);
-	if (nid == NID_pkcs9_unstructuredName)
-		*type=V_ASN1_IA5STRING;
-	return(1);
-	}
-
 static int check_time_format(const char *str)
 	{
 	return ASN1_TIME_set_string(NULL, str);
@@ -2553,7 +2560,7 @@ static int get_certificate_status(const char *serial, CA_DB *db)
 			
 	/* Make it Upper Case */
 	for (i=0; row[DB_serial][i] != '\0'; i++)
-		row[DB_serial][i] = toupper(row[DB_serial][i]);
+		row[DB_serial][i] = toupper((unsigned char)row[DB_serial][i]);
 	
 
 	ok=1;
@@ -2632,9 +2639,9 @@ static int do_updatedb (CA_DB *db)
 	else
 		a_y2k = 0;
 
-	for (i = 0; i < sk_PSTRING_num(db->db->data); i++)
+	for (i = 0; i < sk_OPENSSL_PSTRING_num(db->db->data); i++)
 		{
-		rrow = sk_PSTRING_value(db->db->data, i);
+		rrow = sk_OPENSSL_PSTRING_value(db->db->data, i);
 
 		if (rrow[DB_type][0] == 'V')
 		 	{

apps/ciphers.c

@@ -196,7 +196,7 @@ int MAIN(int argc, char **argv)
 			
 			if (Verbose)
 				{
-				unsigned long id = c->id;
+				unsigned long id = SSL_CIPHER_get_id(c);
 				int id0 = (int)(id >> 24);
 				int id1 = (int)((id >> 16) & 0xffL);
 				int id2 = (int)((id >> 8) & 0xffL);

apps/client.pem

@@ -1,24 +1,52 @@
-issuer= /C=AU/ST=Queensland/O=CryptSoft Pty Ltd/CN=Test CA (1024 bit)
-subject=/C=AU/ST=Queensland/O=CryptSoft Pty Ltd/CN=Client test cert (512 bit)
+subject= C = UK, O = OpenSSL Group, OU = FOR TESTING PURPOSES ONLY, CN = Test Client Cert
+issuer= C = UK, O = OpenSSL Group, OU = FOR TESTING PURPOSES ONLY, CN = OpenSSL Test Intermediate CA
 -----BEGIN CERTIFICATE-----
-MIIB6TCCAVICAQIwDQYJKoZIhvcNAQEEBQAwWzELMAkGA1UEBhMCQVUxEzARBgNV
-BAgTClF1ZWVuc2xhbmQxGjAYBgNVBAoTEUNyeXB0U29mdCBQdHkgTHRkMRswGQYD
-VQQDExJUZXN0IENBICgxMDI0IGJpdCkwHhcNOTcwNjA5MTM1NzU2WhcNOTgwNjA5
-MTM1NzU2WjBjMQswCQYDVQQGEwJBVTETMBEGA1UECBMKUXVlZW5zbGFuZDEaMBgG
-A1UEChMRQ3J5cHRTb2Z0IFB0eSBMdGQxIzAhBgNVBAMTGkNsaWVudCB0ZXN0IGNl
-cnQgKDUxMiBiaXQpMFwwDQYJKoZIhvcNAQEBBQADSwAwSAJBALtv55QyzG6i2Plw
-Z1pah7++Gv8L5j6Hnyr/uTZE1NLG0ABDDexmq/R4KedLjFEIYjocDui+IXs62NNt
-XrT8odkCAwEAATANBgkqhkiG9w0BAQQFAAOBgQBwtMmI7oGUG8nKmftQssATViH5
-NRRtoEw07DxJp/LfatHdrhqQB73eGdL5WILZJXk46Xz2e9WMSUjVCSYhdKxtflU3
-UR2Ajv1Oo0sTNdfz0wDqJNirLNtzyhhsaq8qMTrLwXrCP31VxBiigFSQSUFnZyTE
-9TKwhS4GlwbtCfxSKQ==
+MIID5zCCAs+gAwIBAgIJALnu1NlVpZ6yMA0GCSqGSIb3DQEBBQUAMHAxCzAJBgNV
+BAYTAlVLMRYwFAYDVQQKDA1PcGVuU1NMIEdyb3VwMSIwIAYDVQQLDBlGT1IgVEVT
+VElORyBQVVJQT1NFUyBPTkxZMSUwIwYDVQQDDBxPcGVuU1NMIFRlc3QgSW50ZXJt
+ZWRpYXRlIENBMB4XDTExMTIwODE0MDE0OFoXDTIxMTAxNjE0MDE0OFowZDELMAkG
+A1UEBhMCVUsxFjAUBgNVBAoMDU9wZW5TU0wgR3JvdXAxIjAgBgNVBAsMGUZPUiBU
+RVNUSU5HIFBVUlBPU0VTIE9OTFkxGTAXBgNVBAMMEFRlc3QgQ2xpZW50IENlcnQw
+ggEiMA0GCSqGSIb3DQEBAQUAA4IBDwAwggEKAoIBAQC0ranbHRLcLVqN+0BzcZpY
++yOLqxzDWT1LD9eW1stC4NzXX9/DCtSIVyN7YIHdGLrIPr64IDdXXaMRzgZ2rOKs
+lmHCAiFpO/ja99gGCJRxH0xwQatqAULfJVHeUhs7OEGOZc2nWifjqKvGfNTilP7D
+nwi69ipQFq9oS19FmhwVHk2wg7KZGHI1qDyG04UrfCZMRitvS9+UVhPpIPjuiBi2
+x3/FZIpL5gXJvvFK6xHY63oq2asyzBATntBgnP4qJFWWcvRx24wF1PnZabxuVoL2
+bPnQ/KvONDrw3IdqkKhYNTul7jEcu3OlcZIMw+7DiaKJLAzKb/bBF5gm/pwW6As9
+AgMBAAGjgY8wgYwwDAYDVR0TAQH/BAIwADAOBgNVHQ8BAf8EBAMCBeAwLAYJYIZI
+AYb4QgENBB8WHU9wZW5TU0wgR2VuZXJhdGVkIENlcnRpZmljYXRlMB0GA1UdDgQW
+BBSZHKyLoTh7Mb409Zn/mK1ceSDAjDAfBgNVHSMEGDAWgBQ2w2yI55X+sL3szj49
+hqshgYfa2jANBgkqhkiG9w0BAQUFAAOCAQEAD0mL7PtPYgCEuDyOQSbLpeND5hVS
+curxQdGnrJ6Acrhodb7E9ccATokeb0PLx6HBLQUicxhTZIQ9FbO43YkQcOU6C3BB
+IlwskqmtN6+VmrQzNolHCDzvxNZs9lYL2VbGPGqVRyjZeHpoAlf9cQr8PgDb4d4b
+vUx2KAhHQvV2nkmYvKyXcgnRuHggumF87mkxidriGAEFwH4qfOqetUg64WyxP7P2
+QLipm04SyQa7ONtIApfVXgHcE42Py4/f4arzCzMjKe3VyhGkS7nsT55X/fWgTaRm
+CQPkO+H94P958WTvQDt77bQ+D3IvYaVvfil8n6HJMOJfFT0LJuSUbpSXJg==
 -----END CERTIFICATE-----
 -----BEGIN RSA PRIVATE KEY-----
-MIIBOwIBAAJBALtv55QyzG6i2PlwZ1pah7++Gv8L5j6Hnyr/uTZE1NLG0ABDDexm
-q/R4KedLjFEIYjocDui+IXs62NNtXrT8odkCAwEAAQJAbwXq0vJ/+uyEvsNgxLko
-/V86mGXQ/KrSkeKlL0r4ENxjcyeMAGoKu6J9yMY7+X9+Zm4nxShNfTsf/+Freoe1
-HQIhAPOSm5Q1YI+KIsII2GeVJx1U69+wnd71OasIPakS1L1XAiEAxQAW+J3/JWE0
-ftEYakbhUOKL8tD1OaFZS71/5GdG7E8CIQCefUMmySSvwd6kC0VlATSWbW+d+jp/
-nWmM1KvqnAo5uQIhALqEADu5U1Wvt8UN8UDGBRPQulHWNycuNV45d3nnskWPAiAw
-ueTyr6WsZ5+SD8g/Hy3xuvF3nPmJRH+rwvVihlcFOg==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 -----END RSA PRIVATE KEY-----

apps/cms.c

@@ -71,9 +71,9 @@
 static int save_certs(char *signerfile, STACK_OF(X509) *signers);
 static int cms_cb(int ok, X509_STORE_CTX *ctx);
 static void receipt_request_print(BIO *out, CMS_ContentInfo *cms);
-static CMS_ReceiptRequest *make_receipt_request(STACK_OF(STRING) *rr_to,
+static CMS_ReceiptRequest *make_receipt_request(STACK_OF(OPENSSL_STRING) *rr_to,
 						int rr_allorfirst,
-						STACK_OF(STRING) *rr_from);
+					STACK_OF(OPENSSL_STRING) *rr_from);
 
 #define SMIME_OP	0x10
 #define SMIME_IP	0x20
@@ -108,7 +108,7 @@ int MAIN(int argc, char **argv)
 	const char *inmode = "r", *outmode = "w";
 	char *infile = NULL, *outfile = NULL, *rctfile = NULL;
 	char *signerfile = NULL, *recipfile = NULL;
-	STACK_OF(STRING) *sksigners = NULL, *skkeys = NULL;
+	STACK_OF(OPENSSL_STRING) *sksigners = NULL, *skkeys = NULL;
 	char *certfile = NULL, *keyfile = NULL, *contfile=NULL;
 	char *certsoutfile = NULL;
 	const EVP_CIPHER *cipher = NULL;
@@ -122,7 +122,7 @@ int MAIN(int argc, char **argv)
 	int flags = CMS_DETACHED, noout = 0, print = 0;
 	int verify_retcode = 0;
 	int rr_print = 0, rr_allorfirst = -1;
-	STACK_OF(STRING) *rr_to = NULL, *rr_from = NULL;
+	STACK_OF(OPENSSL_STRING) *rr_to = NULL, *rr_from = NULL;
 	CMS_ReceiptRequest *rr = NULL;
 	char *to = NULL, *from = NULL, *subject = NULL;
 	char *CAfile = NULL, *CApath = NULL;
@@ -136,6 +136,7 @@ int MAIN(int argc, char **argv)
 	char *engine=NULL;
 #endif
 	unsigned char *secret_key = NULL, *secret_keyid = NULL;
+	unsigned char *pwri_pass = NULL, *pwri_tmp = NULL;
 	size_t secret_keylen = 0, secret_keyidlen = 0;
 
 	ASN1_OBJECT *econtent_type = NULL;
@@ -281,8 +282,8 @@ int MAIN(int argc, char **argv)
 				goto argerr;
 			args++;
 			if (!rr_from)
-				rr_from = sk_STRING_new_null();
-			sk_STRING_push(rr_from, *args);
+				rr_from = sk_OPENSSL_STRING_new_null();
+			sk_OPENSSL_STRING_push(rr_from, *args);
 			}
 		else if (!strcmp(*args,"-receipt_request_to"))
 			{
@@ -290,8 +291,8 @@ int MAIN(int argc, char **argv)
 				goto argerr;
 			args++;
 			if (!rr_to)
-				rr_to = sk_STRING_new_null();
-			sk_STRING_push(rr_to, *args);
+				rr_to = sk_OPENSSL_STRING_new_null();
+			sk_OPENSSL_STRING_push(rr_to, *args);
 			}
 		else if (!strcmp (*args, "-print"))
 				{
@@ -326,6 +327,13 @@ int MAIN(int argc, char **argv)
 				}
 			secret_keyidlen = (size_t)ltmp;
 			}
+		else if (!strcmp(*args,"-pwri_password"))
+			{
+			if (!args[1])
+				goto argerr;
+			args++;
+			pwri_pass = (unsigned char *)*args;
+			}
 		else if (!strcmp(*args,"-econtent_type"))
 			{
 			if (!args[1])
@@ -387,13 +395,13 @@ int MAIN(int argc, char **argv)
 			if (signerfile)
 				{
 				if (!sksigners)
-					sksigners = sk_STRING_new_null();
-				sk_STRING_push(sksigners, signerfile);
+					sksigners = sk_OPENSSL_STRING_new_null();
+				sk_OPENSSL_STRING_push(sksigners, signerfile);
 				if (!keyfile)
 					keyfile = signerfile;
 				if (!skkeys)
-					skkeys = sk_STRING_new_null();
-				sk_STRING_push(skkeys, keyfile);
+					skkeys = sk_OPENSSL_STRING_new_null();
+				sk_OPENSSL_STRING_push(skkeys, keyfile);
 				keyfile = NULL;
 				}
 			signerfile = *++args;
@@ -435,12 +443,12 @@ int MAIN(int argc, char **argv)
 					goto argerr;
 					}
 				if (!sksigners)
-					sksigners = sk_STRING_new_null();
-				sk_STRING_push(sksigners, signerfile);
+					sksigners = sk_OPENSSL_STRING_new_null();
+				sk_OPENSSL_STRING_push(sksigners, signerfile);
 				signerfile = NULL;
 				if (!skkeys)
-					skkeys = sk_STRING_new_null();
-				sk_STRING_push(skkeys, keyfile);
+					skkeys = sk_OPENSSL_STRING_new_null();
+				sk_OPENSSL_STRING_push(skkeys, keyfile);
 				}
 			keyfile = *++args;
 			}
@@ -539,13 +547,13 @@ int MAIN(int argc, char **argv)
 		if (signerfile)
 			{
 			if (!sksigners)
-				sksigners = sk_STRING_new_null();
-			sk_STRING_push(sksigners, signerfile);
+				sksigners = sk_OPENSSL_STRING_new_null();
+			sk_OPENSSL_STRING_push(sksigners, signerfile);
 			if (!skkeys)
-				skkeys = sk_STRING_new_null();
+				skkeys = sk_OPENSSL_STRING_new_null();
 			if (!keyfile)
 				keyfile = signerfile;
-			sk_STRING_push(skkeys, keyfile);
+			sk_OPENSSL_STRING_push(skkeys, keyfile);
 			}
 		if (!sksigners)
 			{
@@ -559,7 +567,7 @@ int MAIN(int argc, char **argv)
 
 	else if (operation == SMIME_DECRYPT)
 		{
-		if (!recipfile && !keyfile && !secret_key)
+		if (!recipfile && !keyfile && !secret_key && !pwri_pass)
 			{
 			BIO_printf(bio_err, "No recipient certificate or key specified\n");
 			badarg = 1;
@@ -567,7 +575,7 @@ int MAIN(int argc, char **argv)
 		}
 	else if (operation == SMIME_ENCRYPT)
 		{
-		if (!*args && !secret_key)
+		if (!*args && !secret_key && !pwri_pass)
 			{
 			BIO_printf(bio_err, "No recipient(s) certificate(s) specified\n");
 			badarg = 1;
@@ -618,7 +626,7 @@ int MAIN(int argc, char **argv)
 		BIO_printf (bio_err, "-certsout file certificate output file\n");
 		BIO_printf (bio_err, "-signer file   signer certificate file\n");
 		BIO_printf (bio_err, "-recip  file   recipient certificate file for decryption\n");
-		BIO_printf (bio_err, "-skeyid        use subject key identifier\n");
+		BIO_printf (bio_err, "-keyid         use subject key identifier\n");
 		BIO_printf (bio_err, "-in file       input file\n");
 		BIO_printf (bio_err, "-inform arg    input format SMIME (default), PEM or DER\n");
 		BIO_printf (bio_err, "-inkey file    input private key (if not signer or recipient)\n");
@@ -704,7 +712,7 @@ int MAIN(int argc, char **argv)
 
 		if (secret_key && !secret_keyid)
 			{
-			BIO_printf(bio_err, "No sectre key id\n");
+			BIO_printf(bio_err, "No secret key id\n");
 			goto end;
 			}
 
@@ -880,7 +888,7 @@ int MAIN(int argc, char **argv)
 		{
 		if (!(store = setup_verify(bio_err, CAfile, CApath)))
 			goto end;
-		X509_STORE_set_verify_cb_func(store, cms_cb);
+		X509_STORE_set_verify_cb(store, cms_cb);
 		if (vpm)
 			X509_STORE_set1_param(store, vpm);
 		}
@@ -917,6 +925,17 @@ int MAIN(int argc, char **argv)
 			secret_key = NULL;
 			secret_keyid = NULL;
 			}
+		if (pwri_pass)
+			{
+			pwri_tmp = (unsigned char *)BUF_strdup((char *)pwri_pass);
+			if (!pwri_tmp)
+				goto end;
+			if (!CMS_add0_recipient_password(cms,
+						-1, NID_undef, NID_undef,
+						 pwri_tmp, -1, NULL))
+				goto end;
+			pwri_tmp = NULL;
+			}
 		if (!(flags & CMS_STREAM))
 			{
 			if (!CMS_final(cms, in, NULL, flags))
@@ -980,11 +999,11 @@ int MAIN(int argc, char **argv)
 			}
 		else
 			flags |= CMS_REUSE_DIGEST;
-		for (i = 0; i < sk_STRING_num(sksigners); i++)
+		for (i = 0; i < sk_OPENSSL_STRING_num(sksigners); i++)
 			{
 			CMS_SignerInfo *si;
-			signerfile = sk_STRING_value(sksigners, i);
-			keyfile = sk_STRING_value(skkeys, i);
+			signerfile = sk_OPENSSL_STRING_value(sksigners, i);
+			keyfile = sk_OPENSSL_STRING_value(skkeys, i);
 			signer = load_cert(bio_err, signerfile,FORMAT_PEM, NULL,
 					e, "signer certificate");
 			if (!signer)
@@ -1043,6 +1062,16 @@ int MAIN(int argc, char **argv)
 				}
 			}
 
+		if (pwri_pass)
+			{
+			if (!CMS_decrypt_set1_password(cms, pwri_pass, -1))
+				{
+				BIO_puts(bio_err,
+					"Error decrypting CMS using password\n");
+				goto end;
+				}
+			}
+
 		if (!CMS_decrypt(cms, NULL, NULL, indata, out, flags))
 			{
 			BIO_printf(bio_err, "Error decrypting CMS structure\n");
@@ -1160,21 +1189,23 @@ end:
 	if (vpm)
 		X509_VERIFY_PARAM_free(vpm);
 	if (sksigners)
-		sk_STRING_free(sksigners);
+		sk_OPENSSL_STRING_free(sksigners);
 	if (skkeys)
-		sk_STRING_free(skkeys);
+		sk_OPENSSL_STRING_free(skkeys);
 	if (secret_key)
 		OPENSSL_free(secret_key);
 	if (secret_keyid)
 		OPENSSL_free(secret_keyid);
+	if (pwri_tmp)
+		OPENSSL_free(pwri_tmp);
 	if (econtent_type)
 		ASN1_OBJECT_free(econtent_type);
 	if (rr)
 		CMS_ReceiptRequest_free(rr);
 	if (rr_to)
-		sk_STRING_free(rr_to);
+		sk_OPENSSL_STRING_free(rr_to);
 	if (rr_from)
-		sk_STRING_free(rr_from);
+		sk_OPENSSL_STRING_free(rr_from);
 	X509_STORE_free(store);
 	X509_free(cert);
 	X509_free(recip);
@@ -1296,7 +1327,7 @@ static void receipt_request_print(BIO *out, CMS_ContentInfo *cms)
 		}
 	}
 
-static STACK_OF(GENERAL_NAMES) *make_names_stack(STACK_OF(STRING) *ns)
+static STACK_OF(GENERAL_NAMES) *make_names_stack(STACK_OF(OPENSSL_STRING) *ns)
 	{
 	int i;
 	STACK_OF(GENERAL_NAMES) *ret;
@@ -1305,9 +1336,9 @@ static STACK_OF(GENERAL_NAMES) *make_names_stack(STACK_OF(STRING) *ns)
 	ret = sk_GENERAL_NAMES_new_null();
 	if (!ret)
 		goto err;
-	for (i = 0; i < sk_STRING_num(ns); i++)
+	for (i = 0; i < sk_OPENSSL_STRING_num(ns); i++)
 		{
-		char *str = sk_STRING_value(ns, i);
+		char *str = sk_OPENSSL_STRING_value(ns, i);
 		gen = a2i_GENERAL_NAME(NULL, NULL, NULL, GEN_EMAIL, str, 0);
 		if (!gen)
 			goto err;
@@ -1335,9 +1366,9 @@ static STACK_OF(GENERAL_NAMES) *make_names_stack(STACK_OF(STRING) *ns)
 	}
 
 
-static CMS_ReceiptRequest *make_receipt_request(STACK_OF(STRING) *rr_to,
+static CMS_ReceiptRequest *make_receipt_request(STACK_OF(OPENSSL_STRING) *rr_to,
 						int rr_allorfirst,
-						STACK_OF(STRING) *rr_from)
+						STACK_OF(OPENSSL_STRING) *rr_from)
 	{
 	STACK_OF(GENERAL_NAMES) *rct_to, *rct_from;
 	CMS_ReceiptRequest *rr;

apps/crl2p7.c

@@ -92,7 +92,7 @@ int MAIN(int argc, char **argv)
 	PKCS7 *p7 = NULL;
 	PKCS7_SIGNED *p7s = NULL;
 	X509_CRL *crl=NULL;
-	STACK_OF(STRING) *certflst=NULL;
+	STACK_OF(OPENSSL_STRING) *certflst=NULL;
 	STACK_OF(X509_CRL) *crl_stack=NULL;
 	STACK_OF(X509) *cert_stack=NULL;
 	int ret=1,nocrl=0;
@@ -140,8 +140,8 @@ int MAIN(int argc, char **argv)
 		else if (strcmp(*argv,"-certfile") == 0)
 			{
 			if (--argc < 1) goto bad;
-			if(!certflst) certflst = sk_STRING_new_null();
-			sk_STRING_push(certflst,*(++argv));
+			if(!certflst) certflst = sk_OPENSSL_STRING_new_null();
+			sk_OPENSSL_STRING_push(certflst,*(++argv));
 			}
 		else
 			{
@@ -226,8 +226,8 @@ bad:
 	if ((cert_stack=sk_X509_new_null()) == NULL) goto end;
 	p7s->cert=cert_stack;
 
-	if(certflst) for(i = 0; i < sk_STRING_num(certflst); i++) {
-		certfile = sk_STRING_value(certflst, i);
+	if(certflst) for(i = 0; i < sk_OPENSSL_STRING_num(certflst); i++) {
+		certfile = sk_OPENSSL_STRING_value(certflst, i);
 		if (add_certs_from_file(cert_stack,certfile) < 0)
 			{
 			BIO_printf(bio_err, "error loading certificates\n");
@@ -236,7 +236,7 @@ bad:
 			}
 	}
 
-	sk_STRING_free(certflst);
+	sk_OPENSSL_STRING_free(certflst);
 
 	if (outfile == NULL)
 		{

apps/demoSRP/srp_verifier.txt

@@ -0,0 +1,6 @@
+# This is a file that will be filled by the openssl srp routine.
+# You can initialize the file with additional groups, these are
+# records starting with a I followed by the g and N values and the id.
+# The exact values ... you have to dig this out from the source of srp.c
+# or srp_vfy.c
+# The last value of an I is used as the default group for new users.  

apps/demoSRP/srp_verifier.txt.attr

@@ -0,0 +1 @@
+unique_subject = yes

apps/dgst.c

@@ -79,6 +79,26 @@ int do_fp(BIO *out, unsigned char *buf, BIO *bp, int sep, int binout,
 	  const char *sig_name, const char *md_name,
 	  const char *file,BIO *bmd);
 
+static void list_md_fn(const EVP_MD *m,
+			const char *from, const char *to, void *arg)
+	{
+	const char *mname;
+	/* Skip aliases */
+	if (!m)
+		return;
+	mname = OBJ_nid2ln(EVP_MD_type(m));
+	/* Skip shortnames */
+	if (strcmp(from, mname))
+		return;
+	/* Skip clones */
+	if (EVP_MD_flags(m) & EVP_MD_FLAG_PKEY_DIGEST)
+		return;
+	if (strchr(mname, ' '))
+		mname= EVP_MD_name(m);
+	BIO_printf(arg, "-%-14s to use the %s message digest algorithm\n",
+			mname, mname);
+	}
+
 int MAIN(int, char **);
 
 int MAIN(int argc, char **argv)
@@ -107,7 +127,8 @@ int MAIN(int argc, char **argv)
 #endif
 	char *hmac_key=NULL;
 	char *mac_name=NULL;
-	STACK_OF(STRING) *sigopts = NULL, *macopts = NULL;
+	int non_fips_allow = 0;
+	STACK_OF(OPENSSL_STRING) *sigopts = NULL, *macopts = NULL;
 
 	apps_startup();
 
@@ -135,6 +156,8 @@ int MAIN(int argc, char **argv)
 		if ((*argv)[0] != '-') break;
 		if (strcmp(*argv,"-c") == 0)
 			separator=1;
+		else if (strcmp(*argv,"-r") == 0)
+			separator=2;
 		else if (strcmp(*argv,"-rand") == 0)
 			{
 			if (--argc < 1) break;
@@ -193,6 +216,10 @@ int MAIN(int argc, char **argv)
 			out_bin = 1;
 		else if (strcmp(*argv,"-d") == 0)
 			debug=1;
+		else if (strcmp(*argv,"-non-fips-allow") == 0)
+			non_fips_allow=1;
+		else if (!strcmp(*argv,"-fips-fingerprint"))
+			hmac_key = "etaonrishdlcupfm";
 		else if (!strcmp(*argv,"-hmac"))
 			{
 			if (--argc < 1)
@@ -210,8 +237,8 @@ int MAIN(int argc, char **argv)
 			if (--argc < 1)
 				break;
 			if (!sigopts)
-				sigopts = sk_STRING_new_null();
-			if (!sigopts || !sk_STRING_push(sigopts, *(++argv)))
+				sigopts = sk_OPENSSL_STRING_new_null();
+			if (!sigopts || !sk_OPENSSL_STRING_push(sigopts, *(++argv)))
 				break;
 			}
 		else if (strcmp(*argv,"-macopt") == 0)
@@ -219,8 +246,8 @@ int MAIN(int argc, char **argv)
 			if (--argc < 1)
 				break;
 			if (!macopts)
-				macopts = sk_STRING_new_null();
-			if (!macopts || !sk_STRING_push(macopts, *(++argv)))
+				macopts = sk_OPENSSL_STRING_new_null();
+			if (!macopts || !sk_OPENSSL_STRING_push(macopts, *(++argv)))
 				break;
 			}
 		else if ((m=EVP_get_digestbyname(&((*argv)[1]))) != NULL)
@@ -242,6 +269,7 @@ int MAIN(int argc, char **argv)
 		BIO_printf(bio_err,"unknown option '%s'\n",*argv);
 		BIO_printf(bio_err,"options are\n");
 		BIO_printf(bio_err,"-c              to output the digest with separating colons\n");
+		BIO_printf(bio_err,"-r              to output the digest in coreutils format\n");
 		BIO_printf(bio_err,"-d              to output debug info\n");
 		BIO_printf(bio_err,"-hex            output as hex dump\n");
 		BIO_printf(bio_err,"-binary         output in binary form\n");
@@ -249,43 +277,17 @@ int MAIN(int argc, char **argv)
 		BIO_printf(bio_err,"-verify file    verify a signature using public key in file\n");
 		BIO_printf(bio_err,"-prverify file  verify a signature using private key in file\n");
 		BIO_printf(bio_err,"-keyform arg    key file format (PEM or ENGINE)\n");
+		BIO_printf(bio_err,"-out filename   output to filename rather than stdout\n");
 		BIO_printf(bio_err,"-signature file signature to verify\n");
 		BIO_printf(bio_err,"-sigopt nm:v    signature parameter\n");
 		BIO_printf(bio_err,"-hmac key       create hashed MAC with key\n");
+		BIO_printf(bio_err,"-mac algorithm  create MAC (not neccessarily HMAC)\n"); 
+		BIO_printf(bio_err,"-macopt nm:v    MAC algorithm parameters or key\n");
 #ifndef OPENSSL_NO_ENGINE
 		BIO_printf(bio_err,"-engine e       use engine e, possibly a hardware device.\n");
 #endif
 
-		BIO_printf(bio_err,"-%-14s to use the %s message digest algorithm (default)\n",
-			LN_md5,LN_md5);
-		BIO_printf(bio_err,"-%-14s to use the %s message digest algorithm\n",
-			LN_md4,LN_md4);
-		BIO_printf(bio_err,"-%-14s to use the %s message digest algorithm\n",
-			LN_md2,LN_md2);
-#ifndef OPENSSL_NO_SHA
-		BIO_printf(bio_err,"-%-14s to use the %s message digest algorithm\n",
-			LN_sha1,LN_sha1);
-#ifndef OPENSSL_NO_SHA256
-		BIO_printf(bio_err,"-%-14s to use the %s message digest algorithm\n",
-			LN_sha224,LN_sha224);
-		BIO_printf(bio_err,"-%-14s to use the %s message digest algorithm\n",
-			LN_sha256,LN_sha256);
-#endif
-#ifndef OPENSSL_NO_SHA512
-		BIO_printf(bio_err,"-%-14s to use the %s message digest algorithm\n",
-			LN_sha384,LN_sha384);
-		BIO_printf(bio_err,"-%-14s to use the %s message digest algorithm\n",
-			LN_sha512,LN_sha512);
-#endif
-#endif
-		BIO_printf(bio_err,"-%-14s to use the %s message digest algorithm\n",
-			LN_mdc2,LN_mdc2);
-		BIO_printf(bio_err,"-%-14s to use the %s message digest algorithm\n",
-			LN_ripemd160,LN_ripemd160);
-#ifndef OPENSSL_NO_WHIRLPOOL
-		BIO_printf(bio_err,"-%-14s to use the %s message digest algorithm\n",
-			SN_whirlpool,SN_whirlpool);
-#endif
+		EVP_MD_do_all_sorted(list_md_fn, bio_err);
 		goto end;
 		}
 
@@ -371,9 +373,9 @@ int MAIN(int argc, char **argv)
 		if (macopts)
 			{
 			char *macopt;
-			for (i = 0; i < sk_STRING_num(macopts); i++)
+			for (i = 0; i < sk_OPENSSL_STRING_num(macopts); i++)
 				{
-				macopt = sk_STRING_value(macopts, i);
+				macopt = sk_OPENSSL_STRING_value(macopts, i);
 				if (pkey_ctrl_string(mac_ctx, macopt) <= 0)
 					{
 					BIO_printf(bio_err,
@@ -398,6 +400,13 @@ int MAIN(int argc, char **argv)
 			goto end;
 		}
 
+	if (non_fips_allow)
+		{
+		EVP_MD_CTX *md_ctx;
+		BIO_get_md_ctx(bmd,&md_ctx);
+		EVP_MD_CTX_set_flags(md_ctx, EVP_MD_CTX_FLAG_NON_FIPS_ALLOW);
+		}
+
 	if (hmac_key)
 		{
 		sigkey = EVP_PKEY_new_mac_key(EVP_PKEY_HMAC, e,
@@ -430,9 +439,9 @@ int MAIN(int argc, char **argv)
 		if (sigopts)
 			{
 			char *sigopt;
-			for (i = 0; i < sk_STRING_num(sigopts); i++)
+			for (i = 0; i < sk_OPENSSL_STRING_num(sigopts); i++)
 				{
-				sigopt = sk_STRING_value(sigopts, i);
+				sigopt = sk_OPENSSL_STRING_value(sigopts, i);
 				if (pkey_ctrl_string(pctx, sigopt) <= 0)
 					{
 					BIO_printf(bio_err,
@@ -537,9 +546,9 @@ end:
 	BIO_free_all(out);
 	EVP_PKEY_free(sigkey);
 	if (sigopts)
-		sk_STRING_free(sigopts);
+		sk_OPENSSL_STRING_free(sigopts);
 	if (macopts)
-		sk_STRING_free(macopts);
+		sk_OPENSSL_STRING_free(macopts);
 	if(sigbuf) OPENSSL_free(sigbuf);
 	if (bmd != NULL) BIO_free(bmd);
 	apps_shutdown();
@@ -598,9 +607,22 @@ int do_fp(BIO *out, unsigned char *buf, BIO *bp, int sep, int binout,
 			}
 		}
 	else
+		{
 		len=BIO_gets(bp,(char *)buf,BUFSIZE);
+		if ((int)len <0)
+			{
+			ERR_print_errors(bio_err);
+			return 1;
+			}
+		}
 
 	if(binout) BIO_write(out, buf, len);
+	else if (sep == 2)
+		{
+		for (i=0; i<(int)len; i++)
+			BIO_printf(out, "%02x",buf[i]);
+		BIO_printf(out, " *%s\n", file);
+		}
 	else 
 		{
 		if (sig_name)

apps/dh.c

@@ -88,9 +88,6 @@ int MAIN(int, char **);
 
 int MAIN(int argc, char **argv)
 	{
-#ifndef OPENSSL_NO_ENGINE
-	ENGINE *e = NULL;
-#endif
 	DH *dh=NULL;
 	int i,badops=0,text=0;
 	BIO *in=NULL,*out=NULL;
@@ -189,7 +186,7 @@ bad:
 	ERR_load_crypto_strings();
 
 #ifndef OPENSSL_NO_ENGINE
-        e = setup_engine(bio_err, engine, 0);
+        setup_engine(bio_err, engine, 0);
 #endif
 
 	in=BIO_new(BIO_s_file());
@@ -349,4 +346,10 @@ end:
 	apps_shutdown();
 	OPENSSL_EXIT(ret);
 	}
+#else /* !OPENSSL_NO_DH */
+
+# if PEDANTIC
+static void *dummy=&dummy;
+# endif
+
 #endif

apps/dhparam.c

@@ -149,9 +149,6 @@ int MAIN(int, char **);
 
 int MAIN(int argc, char **argv)
 	{
-#ifndef OPENSSL_NO_ENGINE
-	ENGINE *e = NULL;
-#endif
 	DH *dh=NULL;
 	int i,badops=0,text=0;
 #ifndef OPENSSL_NO_DSA
@@ -270,7 +267,7 @@ bad:
 	ERR_load_crypto_strings();
 
 #ifndef OPENSSL_NO_ENGINE
-        e = setup_engine(bio_err, engine, 0);
+        setup_engine(bio_err, engine, 0);
 #endif
 
 	if (g && !num)
@@ -554,4 +551,10 @@ static int MS_CALLBACK dh_cb(int p, int n, BN_GENCB *cb)
 	return 1;
 	}
 
+#else /* !OPENSSL_NO_DH */
+
+# if PEDANTIC
+static void *dummy=&dummy;
+# endif
+
 #endif

apps/dsa.c

@@ -334,6 +334,7 @@ bad:
 			i=PEM_write_bio_DSA_PUBKEY(out,dsa);
 		else i=PEM_write_bio_DSAPrivateKey(out,dsa,enc,
 							NULL,0,NULL, passout);
+#if !defined(OPENSSL_NO_RSA) && !defined(OPENSSL_NO_RC4)
 	} else if (outformat == FORMAT_MSBLOB || outformat == FORMAT_PVK) {
 		EVP_PKEY *pk;
 		pk = EVP_PKEY_new();
@@ -345,11 +346,12 @@ bad:
 		else
 			i = i2b_PrivateKey_bio(out, pk);
 		EVP_PKEY_free(pk);
+#endif
 	} else {
 		BIO_printf(bio_err,"bad output format specified for outfile\n");
 		goto end;
 		}
-	if (!i)
+	if (i <= 0)
 		{
 		BIO_printf(bio_err,"unable to write private key\n");
 		ERR_print_errors(bio_err);
@@ -365,4 +367,10 @@ end:
 	apps_shutdown();
 	OPENSSL_EXIT(ret);
 	}
+#else /* !OPENSSL_NO_DSA */
+
+# if PEDANTIC
+static void *dummy=&dummy;
+# endif
+
 #endif

apps/dsaparam.c

@@ -111,9 +111,6 @@ int MAIN(int, char **);
 
 int MAIN(int argc, char **argv)
 	{
-#ifndef OPENSSL_NO_ENGINE
-	ENGINE *e = NULL;
-#endif
 	DSA *dsa=NULL;
 	int i,badops=0,text=0;
 	BIO *in=NULL,*out=NULL;
@@ -278,7 +275,7 @@ bad:
 		}
 
 #ifndef OPENSSL_NO_ENGINE
-        e = setup_engine(bio_err, engine, 0);
+        setup_engine(bio_err, engine, 0);
 #endif
 
 	if (need_rand)
@@ -357,12 +354,10 @@ bad:
 	if (C)
 		{
 		unsigned char *data;
-		int l,len,bits_p,bits_q,bits_g;
+		int l,len,bits_p;
 
 		len=BN_num_bytes(dsa->p);
 		bits_p=BN_num_bits(dsa->p);
-		bits_q=BN_num_bits(dsa->q);
-		bits_g=BN_num_bits(dsa->g);
 		data=(unsigned char *)OPENSSL_malloc(len+20);
 		if (data == NULL)
 			{
@@ -475,4 +470,10 @@ static int MS_CALLBACK dsa_cb(int p, int n, BN_GENCB *cb)
 #endif
 	return 1;
 	}
+#else /* !OPENSSL_NO_DSA */
+
+# if PEDANTIC
+static void *dummy=&dummy;
+# endif
+
 #endif

apps/ec.c

@@ -85,9 +85,6 @@ int MAIN(int, char **);
 
 int MAIN(int argc, char **argv)
 {
-#ifndef OPENSSL_NO_ENGINE
-	ENGINE 	*e = NULL;
-#endif
 	int 	ret = 1;
 	EC_KEY 	*eckey = NULL;
 	const EC_GROUP *group;
@@ -254,7 +251,7 @@ bad:
 	ERR_load_crypto_strings();
 
 #ifndef OPENSSL_NO_ENGINE
-        e = setup_engine(bio_err, engine, 0);
+        setup_engine(bio_err, engine, 0);
 #endif
 
 	if(!app_passwd(bio_err, passargin, passargout, &passin, &passout)) 
@@ -400,4 +397,10 @@ end:
 	apps_shutdown();
 	OPENSSL_EXIT(ret);
 }
+#else /* !OPENSSL_NO_EC */
+
+# if PEDANTIC
+static void *dummy=&dummy;
+# endif
+
 #endif

apps/ecparam.c

@@ -129,9 +129,6 @@ int MAIN(int argc, char **argv)
 	char	*infile = NULL, *outfile = NULL, *prog;
 	BIO 	*in = NULL, *out = NULL;
 	int 	informat, outformat, noout = 0, C = 0, ret = 1;
-#ifndef OPENSSL_NO_ENGINE
-	ENGINE	*e = NULL;
-#endif
 	char	*engine = NULL;
 
 	BIGNUM	*ec_p = NULL, *ec_a = NULL, *ec_b = NULL,
@@ -340,7 +337,7 @@ bad:
 		}
 
 #ifndef OPENSSL_NO_ENGINE
-	e = setup_engine(bio_err, engine, 0);
+	setup_engine(bio_err, engine, 0);
 #endif
 
 	if (list_curves)
@@ -725,4 +722,10 @@ static int ecparam_print_var(BIO *out, BIGNUM *in, const char *var,
 	BIO_printf(out, "\n\t};\n\n");
 	return 1;
 	}
+#else /* !OPENSSL_NO_EC */
+
+# if PEDANTIC
+static void *dummy=&dummy;
+# endif
+
 #endif

apps/enc.c

@@ -101,9 +101,6 @@ int MAIN(int, char **);
 
 int MAIN(int argc, char **argv)
 	{
-#ifndef OPENSSL_NO_ENGINE
-	ENGINE *e = NULL;
-#endif
 	static const char magic[]="Salted__";
 	char mbuf[sizeof magic-1];
 	char *strbuf=NULL;
@@ -132,6 +129,7 @@ int MAIN(int argc, char **argv)
 	char *engine = NULL;
 #endif
 	const EVP_MD *dgst=NULL;
+	int non_fips_allow = 0;
 
 	apps_startup();
 
@@ -243,7 +241,12 @@ int MAIN(int argc, char **argv)
 				goto bad;
 				}
 			buf[0]='\0';
-			fgets(buf,sizeof buf,infile);
+			if (!fgets(buf,sizeof buf,infile))
+				{
+				BIO_printf(bio_err,"unable to read key from '%s'\n",
+					file);
+				goto bad;
+				}
 			fclose(infile);
 			i=strlen(buf);
 			if ((i > 0) &&
@@ -279,6 +282,8 @@ int MAIN(int argc, char **argv)
 			if (--argc < 1) goto bad;
 			md= *(++argv);
 			}
+		else if (strcmp(*argv,"-non-fips-allow") == 0)
+			non_fips_allow = 1;
 		else if	((argv[0][0] == '-') &&
 			((c=EVP_get_cipherbyname(&(argv[0][1]))) != NULL))
 			{
@@ -323,7 +328,7 @@ bad:
 		}
 
 #ifndef OPENSSL_NO_ENGINE
-        e = setup_engine(bio_err, engine, 0);
+        setup_engine(bio_err, engine, 0);
 #endif
 
 	if (md && (dgst=EVP_get_digestbyname(md)) == NULL)
@@ -391,8 +396,10 @@ bad:
 
 	if (inf == NULL)
 	        {
+#ifndef OPENSSL_NO_SETVBUF_IONBF
 		if (bufsize != NULL)
 			setvbuf(stdin, (char *)NULL, _IONBF, 0);
+#endif /* ndef OPENSSL_NO_SETVBUF_IONBF */
 		BIO_set_fp(in,stdin,BIO_NOCLOSE);
 	        }
 	else
@@ -445,8 +452,10 @@ bad:
 	if (outf == NULL)
 		{
 		BIO_set_fp(out,stdout,BIO_NOCLOSE);
+#ifndef OPENSSL_NO_SETVBUF_IONBF
 		if (bufsize != NULL)
 			setvbuf(stdout, (char *)NULL, _IONBF, 0);
+#endif /* ndef OPENSSL_NO_SETVBUF_IONBF */
 #ifdef OPENSSL_SYS_VMS
 		{
 		BIO *tmpbio = BIO_new(BIO_f_linebuffer());
@@ -583,6 +592,11 @@ bad:
 		 */
 
 		BIO_get_cipher_ctx(benc, &ctx);
+
+		if (non_fips_allow)
+			EVP_CIPHER_CTX_set_flags(ctx,
+				EVP_CIPH_FLAG_NON_FIPS_ALLOW);
+
 		if (!EVP_CipherInit_ex(ctx, cipher, NULL, NULL, NULL, enc))
 			{
 			BIO_printf(bio_err, "Error setting cipher %s\n",

apps/engine.c

@@ -200,7 +200,7 @@ static int util_verbose(ENGINE *e, int verbose, BIO *bio_out, const char *indent
 	char *desc = NULL;
 	int flags;
 	int xpos = 0;
-	STACK_OF(STRING) *cmds = NULL;
+	STACK_OF(OPENSSL_STRING) *cmds = NULL;
 	if(!ENGINE_ctrl(e, ENGINE_CTRL_HAS_CTRL_FUNCTION, 0, NULL, NULL) ||
 			((num = ENGINE_ctrl(e, ENGINE_CTRL_GET_FIRST_CMD_TYPE,
 					0, NULL, NULL)) <= 0))
@@ -211,7 +211,7 @@ static int util_verbose(ENGINE *e, int verbose, BIO *bio_out, const char *indent
 		return 1;
 		}
 
-	cmds = sk_STRING_new_null();
+	cmds = sk_OPENSSL_STRING_new_null();
 
 	if(!cmds)
 		goto err;
@@ -284,16 +284,16 @@ static int util_verbose(ENGINE *e, int verbose, BIO *bio_out, const char *indent
 		BIO_printf(bio_out, "\n");
 	ret = 1;
 err:
-	if(cmds) sk_STRING_pop_free(cmds, identity);
+	if(cmds) sk_OPENSSL_STRING_pop_free(cmds, identity);
 	if(name) OPENSSL_free(name);
 	if(desc) OPENSSL_free(desc);
 	return ret;
 	}
 
-static void util_do_cmds(ENGINE *e, STACK_OF(STRING) *cmds, BIO *bio_out,
-			 const char *indent)
+static void util_do_cmds(ENGINE *e, STACK_OF(OPENSSL_STRING) *cmds,
+			BIO *bio_out, const char *indent)
 	{
-	int loop, res, num = sk_STRING_num(cmds);
+	int loop, res, num = sk_OPENSSL_STRING_num(cmds);
 
 	if(num < 0)
 		{
@@ -304,7 +304,7 @@ static void util_do_cmds(ENGINE *e, STACK_OF(STRING) *cmds, BIO *bio_out,
 		{
 		char buf[256];
 		const char *cmd, *arg;
-		cmd = sk_STRING_value(cmds, loop);
+		cmd = sk_OPENSSL_STRING_value(cmds, loop);
 		res = 1; /* assume success */
 		/* Check if this command has no ":arg" */
 		if((arg = strstr(cmd, ":")) == NULL)
@@ -344,9 +344,9 @@ int MAIN(int argc, char **argv)
 	const char **pp;
 	int verbose=0, list_cap=0, test_avail=0, test_avail_noise = 0;
 	ENGINE *e;
-	STACK_OF(STRING) *engines = sk_STRING_new_null();
-	STACK_OF(STRING) *pre_cmds = sk_STRING_new_null();
-	STACK_OF(STRING) *post_cmds = sk_STRING_new_null();
+	STACK_OF(OPENSSL_STRING) *engines = sk_OPENSSL_STRING_new_null();
+	STACK_OF(OPENSSL_STRING) *pre_cmds = sk_OPENSSL_STRING_new_null();
+	STACK_OF(OPENSSL_STRING) *post_cmds = sk_OPENSSL_STRING_new_null();
 	int badops=1;
 	BIO *bio_out=NULL;
 	const char *indent = "     ";
@@ -393,20 +393,20 @@ int MAIN(int argc, char **argv)
 			argc--; argv++;
 			if (argc == 0)
 				goto skip_arg_loop;
-			sk_STRING_push(pre_cmds,*argv);
+			sk_OPENSSL_STRING_push(pre_cmds,*argv);
 			}
 		else if (strcmp(*argv,"-post") == 0)
 			{
 			argc--; argv++;
 			if (argc == 0)
 				goto skip_arg_loop;
-			sk_STRING_push(post_cmds,*argv);
+			sk_OPENSSL_STRING_push(post_cmds,*argv);
 			}
 		else if ((strncmp(*argv,"-h",2) == 0) ||
 				(strcmp(*argv,"-?") == 0))
 			goto skip_arg_loop;
 		else
-			sk_STRING_push(engines,*argv);
+			sk_OPENSSL_STRING_push(engines,*argv);
 		argc--;
 		argv++;
 		}
@@ -421,17 +421,17 @@ skip_arg_loop:
 		goto end;
 		}
 
-	if (sk_STRING_num(engines) == 0)
+	if (sk_OPENSSL_STRING_num(engines) == 0)
 		{
 		for(e = ENGINE_get_first(); e != NULL; e = ENGINE_get_next(e))
 			{
-			sk_STRING_push(engines,(char *)ENGINE_get_id(e));
+			sk_OPENSSL_STRING_push(engines,(char *)ENGINE_get_id(e));
 			}
 		}
 
-	for (i=0; i<sk_STRING_num(engines); i++)
+	for (i=0; i<sk_OPENSSL_STRING_num(engines); i++)
 		{
-		const char *id = sk_STRING_value(engines,i);
+		const char *id = sk_OPENSSL_STRING_value(engines,i);
 		if ((e = ENGINE_by_id(id)) != NULL)
 			{
 			const char *name = ENGINE_get_name(e);
@@ -533,9 +533,9 @@ skip_pmeths:
 end:
 
 	ERR_print_errors(bio_err);
-	sk_STRING_pop_free(engines, identity);
-	sk_STRING_pop_free(pre_cmds, identity);
-	sk_STRING_pop_free(post_cmds, identity);
+	sk_OPENSSL_STRING_pop_free(engines, identity);
+	sk_OPENSSL_STRING_pop_free(pre_cmds, identity);
+	sk_OPENSSL_STRING_pop_free(post_cmds, identity);
 	if (bio_out != NULL) BIO_free_all(bio_out);
 	apps_shutdown();
 	OPENSSL_EXIT(ret);

apps/gendh.c

@@ -89,9 +89,6 @@ int MAIN(int, char **);
 int MAIN(int argc, char **argv)
 	{
 	BN_GENCB cb;
-#ifndef OPENSSL_NO_ENGINE
-	ENGINE *e = NULL;
-#endif
 	DH *dh=NULL;
 	int ret=1,num=DEFBITS;
 	int g=2;
@@ -163,7 +160,7 @@ bad:
 		}
 		
 #ifndef OPENSSL_NO_ENGINE
-        e = setup_engine(bio_err, engine, 0);
+        setup_engine(bio_err, engine, 0);
 #endif
 
 	out=BIO_new(BIO_s_file());
@@ -235,4 +232,10 @@ static int MS_CALLBACK dh_cb(int p, int n, BN_GENCB *cb)
 #endif
 	return 1;
 	}
+#else /* !OPENSSL_NO_DH */
+
+# if PEDANTIC
+static void *dummy=&dummy;
+# endif
+
 #endif

apps/gendsa.c

@@ -78,9 +78,6 @@ int MAIN(int, char **);
 
 int MAIN(int argc, char **argv)
 	{
-#ifndef OPENSSL_NO_ENGINE
-	ENGINE *e = NULL;
-#endif
 	DSA *dsa=NULL;
 	int ret=1;
 	char *outfile=NULL;
@@ -206,7 +203,7 @@ bad:
 		}
 
 #ifndef OPENSSL_NO_ENGINE
-        e = setup_engine(bio_err, engine, 0);
+        setup_engine(bio_err, engine, 0);
 #endif
 
 	if(!app_passwd(bio_err, NULL, passargout, NULL, &passout)) {
@@ -279,4 +276,10 @@ end:
 	apps_shutdown();
 	OPENSSL_EXIT(ret);
 	}
+#else /* !OPENSSL_NO_DSA */
+
+# if PEDANTIC
+static void *dummy=&dummy;
+# endif
+
 #endif

apps/genrsa.c

@@ -105,9 +105,9 @@ int MAIN(int argc, char **argv)
 	char *inrand=NULL;
 	BIO *out=NULL;
 	BIGNUM *bn = BN_new();
-	RSA *rsa = RSA_new();
+	RSA *rsa = NULL;
 
-	if(!bn || !rsa) goto err;
+	if(!bn) goto err;
 
 	apps_startup();
 	BN_GENCB_set(&cb, genrsa_cb, bio_err);
@@ -265,6 +265,13 @@ bad:
 
 	BIO_printf(bio_err,"Generating RSA private key, %d bit long modulus\n",
 		num);
+#ifdef OPENSSL_NO_ENGINE
+	rsa = RSA_new();
+#else
+	rsa = RSA_new_method(e);
+#endif
+	if (!rsa)
+		goto err;
 
 	if(!BN_set_word(bn, f4) || !RSA_generate_key_ex(rsa, num, bn, &cb))
 		goto err;

apps/install-apps.com

@@ -0,0 +1,107 @@
+$! INSTALL.COM -- Installs the files in a given directory tree
+$!
+$! Author: Richard Levitte <richard@levitte.org>
+$! Time of creation: 22-MAY-1998 10:13
+$!
+$! P1  root of the directory tree
+$! P2  "64" for 64-bit pointers.
+$!
+$!
+$! Announce/identify.
+$!
+$ proc = f$environment( "procedure")
+$ write sys$output "@@@ "+ -
+   f$parse( proc, , , "name")+ f$parse( proc, , , "type")
+$!
+$ on error then goto tidy
+$ on control_c then goto tidy
+$!
+$ if (p1 .eqs. "")
+$ then
+$   write sys$output "First argument missing."
+$   write sys$output -
+     "It should be the directory where you want things installed."
+$   exit
+$ endif
+$!
+$ if (f$getsyi("cpu") .lt. 128)
+$ then
+$   arch = "VAX"
+$ else
+$   arch = f$edit( f$getsyi( "arch_name"), "upcase")
+$   if (arch .eqs. "") then arch = "UNK"
+$ endif
+$!
+$ archd = arch
+$!
+$ if (p2 .nes. "")
+$ then
+$   if (p2 .eqs. "64")
+$   then
+$     archd = arch+ "_64"
+$   else
+$     if (p2 .nes. "32")
+$     then
+$       write sys$output "Second argument invalid."
+$       write sys$output "It should be "32", "64", or nothing."
+$       exit
+$     endif
+$   endif
+$ endif
+$!
+$ root = f$parse( p1, "[]A.;0", , , "syntax_only, no_conceal") - "A.;0"
+$ root_dev = f$parse(root,,,"device","syntax_only")
+$ root_dir = f$parse(root,,,"directory","syntax_only") - -
+   "[000000." - "][" - "[" - "]"
+$ root = root_dev + "[" + root_dir
+$!
+$ define /nolog wrk_sslroot 'root'.] /trans=conc
+$ define /nolog wrk_sslxexe wrk_sslroot:['archd'_exe]
+$!
+$ if f$parse("wrk_sslroot:[000000]") .eqs. "" then -
+   create /directory /log wrk_sslroot:[000000]
+$ if f$parse("wrk_sslxexe:") .eqs. "" then -
+   create /directory /log wrk_sslxexe:
+$!
+$ exe := openssl
+$!
+$ exe_dir := [-.'archd'.exe.apps]
+$!
+$! Executables.
+$!
+$ i = 0
+$ loop_exe:
+$   e = f$edit(f$element( i, ",", exe), "trim")
+$   i = i + 1
+$   if e .eqs. "," then goto loop_exe_end
+$   set noon
+$   file = exe_dir+ e+ ".exe"
+$   if f$search( file) .nes. ""
+$   then
+$     copy /protection = w:re 'file' wrk_sslxexe: /log
+$   endif
+$   set on
+$ goto loop_exe
+$ loop_exe_end:
+$!
+$! Miscellaneous.
+$!
+$ set noon
+$ copy /protection = w:re ca.com wrk_sslxexe:ca.com /log
+$ copy /protection = w:re openssl-vms.cnf wrk_sslroot:[000000]openssl.cnf /log
+$ set on
+$!
+$ tidy:
+$!
+$ call deass wrk_sslroot
+$ call deass wrk_sslxexe
+$!
+$ exit
+$!
+$ deass: subroutine
+$ if (f$trnlnm( p1, "LNM$PROCESS") .nes. "")
+$ then
+$   deassign /process 'p1'
+$ endif
+$ endsubroutine
+$!

apps/install.com

@@ -1,69 +0,0 @@
-$! INSTALL.COM -- Installs the files in a given directory tree
-$!
-$! Author: Richard Levitte <richard@levitte.org>
-$! Time of creation: 22-MAY-1998 10:13
-$!
-$! P1	root of the directory tree
-$!
-$	IF P1 .EQS. ""
-$	THEN
-$	    WRITE SYS$OUTPUT "First argument missing."
-$	    WRITE SYS$OUTPUT "Should be the directory where you want things installed."
-$	    EXIT
-$	ENDIF
-$
-$	ROOT = F$PARSE(P1,"[]A.;0",,,"SYNTAX_ONLY,NO_CONCEAL") - "A.;0"
-$	ROOT_DEV = F$PARSE(ROOT,,,"DEVICE","SYNTAX_ONLY")
-$	ROOT_DIR = F$PARSE(ROOT,,,"DIRECTORY","SYNTAX_ONLY") -
-		   - "[000000." - "][" - "[" - "]"
-$	ROOT = ROOT_DEV + "[" + ROOT_DIR
-$
-$	DEFINE/NOLOG WRK_SSLROOT 'ROOT'.] /TRANS=CONC
-$	DEFINE/NOLOG WRK_SSLVEXE WRK_SSLROOT:[VAX_EXE]
-$	DEFINE/NOLOG WRK_SSLAEXE WRK_SSLROOT:[ALPHA_EXE]
-$	DEFINE/NOLOG WRK_SSLLIB WRK_SSLROOT:[LIB]
-$
-$	IF F$PARSE("WRK_SSLROOT:[000000]") .EQS. "" THEN -
-	   CREATE/DIR/LOG WRK_SSLROOT:[000000]
-$	IF F$PARSE("WRK_SSLVEXE:") .EQS. "" THEN -
-	   CREATE/DIR/LOG WRK_SSLVEXE:
-$	IF F$PARSE("WRK_SSLAEXE:") .EQS. "" THEN -
-	   CREATE/DIR/LOG WRK_SSLAEXE:
-$	IF F$PARSE("WRK_SSLLIB:") .EQS. "" THEN -
-	   CREATE/DIR/LOG WRK_SSLLIB:
-$
-$	EXE := openssl
-$
-$	VEXE_DIR := [-.VAX.EXE.APPS]
-$	AEXE_DIR := [-.AXP.EXE.APPS]
-$
-$	I = 0
-$ LOOP_EXE: 
-$	E = F$EDIT(F$ELEMENT(I, ",", EXE),"TRIM")
-$	I = I + 1
-$	IF E .EQS. "," THEN GOTO LOOP_EXE_END
-$	SET NOON
-$	IF F$SEARCH(VEXE_DIR+E+".EXE") .NES. ""
-$	THEN
-$	  COPY 'VEXE_DIR''E'.EXE WRK_SSLVEXE:'E'.EXE/log
-$	  SET FILE/PROT=W:RE WRK_SSLVEXE:'E'.EXE
-$	ENDIF
-$	IF F$SEARCH(AEXE_DIR+E+".EXE") .NES. ""
-$	THEN
-$	  COPY 'AEXE_DIR''E'.EXE WRK_SSLAEXE:'E'.EXE/log
-$	  SET FILE/PROT=W:RE WRK_SSLAEXE:'E'.EXE
-$	ENDIF
-$	SET ON
-$	GOTO LOOP_EXE
-$ LOOP_EXE_END:
-$
-$	SET NOON
-$	COPY CA.COM WRK_SSLAEXE:CA.COM/LOG
-$	SET FILE/PROT=W:RE WRK_SSLAEXE:CA.COM
-$	COPY CA.COM WRK_SSLVEXE:CA.COM/LOG
-$	SET FILE/PROT=W:RE WRK_SSLVEXE:CA.COM
-$	COPY OPENSSL-VMS.CNF WRK_SSLROOT:[000000]OPENSSL.CNF/LOG
-$	SET FILE/PROT=W:R WRK_SSLROOT:[000000]OPENSSL.CNF
-$	SET ON
-$
-$	EXIT

apps/makeapps.com

@@ -6,11 +6,12 @@ $!               A-Com Computing, Inc.
 $!               byer@mail.all-net.net
 $!
 $!  Changes by Richard Levitte <richard@levitte.org>
+$!             Zoltan Arpadffy <zoli@polarhome.com>   
 $!
 $!  This command files compiles and creates all the various different
 $!  "application" programs for the different types of encryption for OpenSSL.
 $!  The EXE's are placed in the directory [.xxx.EXE.APPS] where "xxx" denotes
-$!  either AXP or VAX depending on your machine architecture.
+$!  ALPHA, IA64 or VAX, depending on your machine architecture.
 $!
 $!  It was written so it would try to determine what "C" compiler to
 $!  use or you can specify which "C" compiler to use.
@@ -24,7 +25,7 @@ $!	   VAXC	 For VAX C.
 $!	   DECC	 For DEC C.
 $!	   GNUC	 For GNU C.
 $!
-$!  If you don't speficy a compiler, it will try to determine which
+$!  If you don't specify a compiler, it will try to determine which
 $!  "C" compiler to use.
 $!
 $!  P3, if defined, sets a TCP/IP library to use, through one of the following
@@ -38,33 +39,63 @@ $!  P4, if defined, sets a compiler thread NOT needed on OpenVMS 7.1 (and up)
 $!
 $!  P5, if defined, sets a choice of programs to compile.
 $!
+$!  P6, if defined, specifies the C pointer size.  Ignored on VAX.
+$!      ("64=ARGV" gives more efficient code with HP C V7.3 or newer.)
+$!      Supported values are:
+$!
+$!      ""       Compile with default (/NOPOINTER_SIZE)
+$!      32       Compile with /POINTER_SIZE=32 (SHORT)
+$!      64       Compile with /POINTER_SIZE=64[=ARGV] (LONG[=ARGV])
+$!               (Automatically select ARGV if compiler supports it.)
+$!      64=      Compile with /POINTER_SIZE=64 (LONG).
+$!      64=ARGV  Compile with /POINTER_SIZE=64=ARGV (LONG=ARGV).
+$!
+$!  P7, if defined, specifies a directory where ZLIB files (zlib.h,
+$!  libz.olb) may be found.  Optionally, a non-default object library
+$!  name may be included ("dev:[dir]libz_64.olb", for example).
+$!
+$!
+$! Announce/identify.
+$!
+$ proc = f$environment( "procedure")
+$ write sys$output "@@@ "+ -
+   f$parse( proc, , , "name")+ f$parse( proc, , , "type")
+$!
+$ on control_c then goto exit
 $!
 $! Define A TCP/IP Library That We Will Need To Link To.
 $! (That Is, If We Need To Link To One.)
 $!
 $ TCPIP_LIB = ""
+$ ZLIB_LIB = ""
 $!
 $! Check What Architecture We Are Using.
 $!
-$ IF (F$GETSYI("CPU").GE.128)
+$ IF (F$GETSYI("CPU").LT.128)
 $ THEN
 $!
-$!  The Architecture Is AXP.
+$!  The Architecture Is VAX.
 $!
-$   ARCH := AXP
+$   ARCH = "VAX"
 $!
 $! Else...
 $!
 $ ELSE
 $!
-$!  The Architecture Is VAX.
+$!  The Architecture Is Alpha, IA64 or whatever comes in the future.
 $!
-$   ARCH := VAX
+$   ARCH = F$EDIT( F$GETSYI( "ARCH_NAME"), "UPCASE")
+$   IF (ARCH .EQS. "") THEN ARCH = "UNK"
 $!
 $! End The Architecture Check.
 $!
 $ ENDIF
 $!
+$ ARCHD = ARCH
+$ LIB32 = "32"
+$ OPT_FILE = ""
+$ POINTER_SIZE = ""
+$!
 $! Define what programs should be compiled
 $!
 $ PROGRAMS := OPENSSL
@@ -73,25 +104,40 @@ $! Check To Make Sure We Have Valid Command Line Parameters.
 $!
 $ GOSUB CHECK_OPTIONS
 $!
+$! Define The CRYPTO Library.
+$!
+$ CRYPTO_LIB := SYS$DISK:[-.'ARCHD'.EXE.CRYPTO]SSL_LIBCRYPTO'LIB32'.OLB
+$!
+$! Define The SSL Library.
+$!
+$ SSL_LIB := SYS$DISK:[-.'ARCHD'.EXE.SSL]SSL_LIBSSL'LIB32'.OLB
+$!
+$! Define The OBJ and EXE Directories.
+$!
+$ OBJ_DIR := SYS$DISK:[-.'ARCHD'.OBJ.APPS]
+$ EXE_DIR := SYS$DISK:[-.'ARCHD'.EXE.APPS]
+$!
+$! Specify the destination directory in any /MAP option.
+$!
+$ if (LINKMAP .eqs. "MAP")
+$ then
+$   LINKMAP = LINKMAP+ "=''EXE_DIR'"
+$ endif
+$!
+$! Add the location prefix to the linker options file name.
+$!
+$ if (OPT_FILE .nes. "")
+$ then
+$   OPT_FILE = EXE_DIR+ OPT_FILE
+$ endif
+$!
 $! Initialise logical names and such
 $!
 $ GOSUB INITIALISE
 $!
 $! Tell The User What Kind of Machine We Run On.
 $!
-$ WRITE SYS$OUTPUT "Compiling On A ",ARCH," Machine."
-$!
-$! Define The CRYPTO Library.
-$!
-$ CRYPTO_LIB := SYS$DISK:[-.'ARCH'.EXE.CRYPTO]LIBCRYPTO.OLB
-$!
-$! Define The SSL Library.
-$!
-$ SSL_LIB := SYS$DISK:[-.'ARCH'.EXE.SSL]LIBSSL.OLB
-$!
-$! Define The OBJ Directory.
-$!
-$ OBJ_DIR := SYS$DISK:[-.'ARCH'.OBJ.APPS]
+$ WRITE SYS$OUTPUT "Host system architecture: ''ARCHD'"
 $!
 $! Check To See If The OBJ Directory Exists.
 $!
@@ -106,10 +152,6 @@ $! End The OBJ Directory Check.
 $!
 $ ENDIF
 $!
-$! Define The EXE Directory.
-$!
-$ EXE_DIR := SYS$DISK:[-.'ARCH'.EXE.APPS]
-$!
 $! Check To See If The EXE Directory Exists.
 $!
 $ IF (F$PARSE(EXE_DIR).EQS."")
@@ -132,6 +174,9 @@ $!
 $ GOSUB CHECK_OPT_FILE
 $!
 $! Define The Application Files.
+$! NOTE: Some might think this list ugly.  However, it's made this way to
+$! reflect the E_OBJ variable in Makefile as closely as possible, thereby
+$! making it fairly easy to verify that the lists are the same.
 $!
 $ LIB_OPENSSL = "VERIFY,ASN1PARS,REQ,DGST,DH,DHPARAM,ENC,PASSWD,GENDH,ERRSTR,"+-
 	     	"CA,PKCS7,CRL2P7,CRL,"+-
@@ -139,14 +184,17 @@ $ LIB_OPENSSL = "VERIFY,ASN1PARS,REQ,DGST,DH,DHPARAM,ENC,PASSWD,GENDH,ERRSTR,"+-
 	      	"X509,GENRSA,GENDSA,GENPKEY,S_SERVER,S_CLIENT,SPEED,"+-
 	      	"S_TIME,APPS,S_CB,S_SOCKET,APP_RAND,VERSION,SESS_ID,"+-
 	      	"CIPHERS,NSEQ,PKCS12,PKCS8,PKEY,PKEYPARAM,PKEYUTL,"+ -
-	      	"SPKAC,SMIME,CMS,RAND,ENGINE,OCSP,PRIME,TS"
+	      	"SPKAC,SMIME,CMS,RAND,ENGINE,OCSP,PRIME,TS,SRP"
+$!
+$ LIB_OPENSSL = LIB_OPENSSL+ ",VMS_DECC_INIT"
+$!
 $ TCPIP_PROGRAMS = ",,"
 $ IF COMPILER .EQS. "VAXC" THEN -
      TCPIP_PROGRAMS = ",OPENSSL,"
 $!
 $! Setup exceptional compilations
 $!
-$ COMPILEWITH_CC2 = ",S_SERVER,S_CLIENT,"
+$ COMPILEWITH_CC2 = ",S_SOCKET,S_SERVER,S_CLIENT,"
 $!
 $ PHASE := LIB
 $!
@@ -164,6 +212,10 @@ $!  Make The Application File Name
 $!
 $ CURRENT_APP = F$EDIT(F$ELEMENT(APP_COUNTER,",",PROGRAMS),"TRIM")
 $!
+$!  Create The Executable File Name.
+$!
+$   EXE_FILE = EXE_DIR + CURRENT_APP + ".EXE"
+$!
 $!  Check To See If We Are At The End Of The File List.
 $!
 $ IF (CURRENT_APP.EQS.",")
@@ -193,7 +245,7 @@ $   LIB_COUNTER = -1
 $!
 $!  Create a .OPT file for the object files
 $!
-$   OPEN/WRITE OBJECTS 'EXE_DIR''CURRENT_APP'.OPT
+$   OPEN /WRITE OBJECTS 'EXE_DIR''CURRENT_APP'.OPT
 $!
 $!  Top Of The File Loop.
 $!
@@ -227,10 +279,6 @@ $!
 $!  Create The Object File Name.
 $!
 $   OBJECT_FILE = OBJ_DIR + FILE_NAME + ".OBJ"
-$!
-$!  Create The Executable File Name.
-$!
-$   EXE_FILE = EXE_DIR + FILE_NAME + ".EXE"
 $   ON WARNING THEN GOTO NEXT_LIB
 $!
 $!  Check To See If The File We Want To Compile Actually Exists.
@@ -284,34 +332,18 @@ $   GOTO NEXT_APP
 $ ENDIF
 $!
 $! Link The Program.
-$! Check To See If We Are To Link With A Specific TCP/IP Library.
 $!
 $ ON WARNING THEN GOTO NEXT_APP
 $!
-$ IF (TCPIP_LIB.NES."")
-$ THEN
-$!
 $! Don't Link With The RSAREF Routines And TCP/IP Library.
 $!
-$   LINK/'DEBUGGER'/'TRACEBACK' /EXE='EXE_FILE' -
-	'EXE_DIR''CURRENT_APP'.OPT/OPTION, -
-        'SSL_LIB'/LIBRARY,'CRYPTO_LIB'/LIBRARY, -
-        'TCPIP_LIB','OPT_FILE'/OPTION
-$!
-$! Else...
-$!
-$ ELSE
-$!
-$! Don't Link With The RSAREF Routines And Link With A TCP/IP Library.
-$!
-$   LINK/'DEBUGGER'/'TRACEBACK' /EXE='EXE_FILE' -
-	'EXE_DIR''CURRENT_APP'.OPT/OPTION, -
-        'SSL_LIB'/LIBRARY,'CRYPTO_LIB'/LIBRARY, -
-        'OPT_FILE'/OPTION
-$!
-$! End The TCP/IP Library Check.
-$!
-$ ENDIF
+$ LINK /'DEBUGGER' /'LINKMAP' /'TRACEBACK' /EXE='EXE_FILE' -
+  'EXE_DIR''CURRENT_APP'.OPT /OPTIONS, -
+  'SSL_LIB' /LIBRARY, -
+  'CRYPTO_LIB' /LIBRARY -
+  'TCPIP_LIB' -
+  'ZLIB_LIB' -
+  ,'OPT_FILE' /OPTIONS
 $!
 $! Go Back And Do It Again.
 $!
@@ -346,7 +378,7 @@ $!
 $     CREATE 'OPT_FILE'
 $DECK
 !
-! Default System Options File To Link Agianst 
+! Default System Options File To Link Against 
 ! The Sharable VAX C Runtime Library.
 !
 SYS$SHARE:VAXCRTL.EXE/SHARE
@@ -375,7 +407,7 @@ $!
 $     CREATE 'OPT_FILE'
 $DECK
 !
-! Default System Options File To Link Agianst 
+! Default System Options File To Link Against 
 ! The Sharable C Runtime Library.
 !
 GNU_CC:[000000]GCCLIB/LIBRARY
@@ -410,7 +442,7 @@ $!
 $       CREATE 'OPT_FILE'
 $DECK
 !
-! Default System Options File To Link Agianst 
+! Default System Options File To Link Against 
 ! The Sharable DEC C Runtime Library.
 !
 SYS$SHARE:DECC$SHR.EXE/SHARE
@@ -420,19 +452,19 @@ $!    Else...
 $!
 $     ELSE
 $!
-$!      Create The AXP Linker Option File.
+$!      Create The non-VAX Linker Option File.
 $!
 $       CREATE 'OPT_FILE'
 $DECK
 !
-! Default System Options File For AXP To Link Agianst 
+! Default System Options File For non-VAX To Link Against 
 ! The Sharable C Runtime Library.
 !
 SYS$SHARE:CMA$OPEN_LIB_SHR/SHARE
 SYS$SHARE:CMA$OPEN_RTL/SHARE
 $EOD
 $!
-$!    End The VAX/AXP DEC C Option File Check.
+$!    End The DEC C Option File Check.
 $!
 $     ENDIF
 $!
@@ -509,14 +541,15 @@ $!
 $ IF (P1.EQS."NODEBUG")
 $ THEN
 $!
-$!   P1 Is NODEBUG, So Compile Without Debugger Information.
+$!  P1 Is NODEBUG, So Compile Without Debugger Information.
 $!
-$    DEBUGGER  = "NODEBUG"
-$    TRACEBACK = "NOTRACEBACK" 
-$    GCC_OPTIMIZE = "OPTIMIZE"
-$    CC_OPTIMIZE = "OPTIMIZE"
-$    WRITE SYS$OUTPUT "No Debugger Information Will Be Produced During Compile."
-$    WRITE SYS$OUTPUT "Compiling With Compiler Optimization."
+$   DEBUGGER  = "NODEBUG"
+$   LINKMAP = "NOMAP"
+$   TRACEBACK = "NOTRACEBACK" 
+$   GCC_OPTIMIZE = "OPTIMIZE"
+$   CC_OPTIMIZE = "OPTIMIZE"
+$   WRITE SYS$OUTPUT "No Debugger Information Will Be Produced During Compile."
+$   WRITE SYS$OUTPUT "Compiling With Compiler Optimization."
 $!
 $! Else...
 $!
@@ -530,6 +563,7 @@ $!
 $!    Compile With Debugger Information.
 $!
 $     DEBUGGER  = "DEBUG"
+$     LINKMAP = "MAP"
 $     TRACEBACK = "TRACEBACK"
 $     GCC_OPTIMIZE = "NOOPTIMIZE"
 $     CC_OPTIMIZE = "NOOPTIMIZE"
@@ -537,7 +571,7 @@ $     WRITE SYS$OUTPUT "Debugger Information Will Be Produced During Compile."
 $     WRITE SYS$OUTPUT "Compiling Without Compiler Optimization."
 $   ELSE
 $!
-$!    Tell The User Entered An Invalid Option..
+$!    Tell The User Entered An Invalid Option.
 $!
 $     WRITE SYS$OUTPUT ""
 $     WRITE SYS$OUTPUT "The Option ",P1," Is Invalid.  The Valid Options Are:"
@@ -550,7 +584,7 @@ $!    Time To EXIT.
 $!
 $     EXIT
 $!
-$!  End The Valid Arguement Check.
+$!  End The Valid Argument Check.
 $!
 $   ENDIF
 $!
@@ -558,6 +592,87 @@ $! End The P1 Check.
 $!
 $ ENDIF
 $!
+$! Check P6 (POINTER_SIZE).
+$!
+$ IF (P6 .NES. "") .AND. (ARCH .NES. "VAX")
+$ THEN
+$!
+$   IF (P6 .EQS. "32")
+$   THEN
+$     POINTER_SIZE = " /POINTER_SIZE=32"
+$   ELSE
+$     POINTER_SIZE = F$EDIT( P6, "COLLAPSE, UPCASE")
+$     IF ((POINTER_SIZE .EQS. "64") .OR. -
+       (POINTER_SIZE .EQS. "64=") .OR. -
+       (POINTER_SIZE .EQS. "64=ARGV"))
+$     THEN
+$       ARCHD = ARCH+ "_64"
+$       LIB32 = ""
+$       IF (F$EXTRACT( 2, 1, POINTER_SIZE) .EQS. "=")
+$       THEN
+$!        Explicit user choice: "64" or "64=ARGV".
+$         IF (POINTER_SIZE .EQS. "64=") THEN POINTER_SIZE = "64"
+$       ELSE
+$         SET NOON
+$         DEFINE /USER_MODE SYS$OUTPUT NL:
+$         DEFINE /USER_MODE SYS$ERROR NL:
+$         CC /NOLIST /NOOBJECT /POINTER_SIZE=64=ARGV NL:
+$         IF ($STATUS .AND. %X0FFF0000) .EQ. %X00030000
+$         THEN
+$           ! If we got here, it means DCL complained like this:
+$           ! %DCL-W-NOVALU, value not allowed - remove value specification
+$           !  \64=\
+$           !
+$           ! If the compiler was run, logicals defined in /USER would
+$           ! have been deassigned automatically.  However, when DCL
+$           ! complains, they aren't, so we do it here (it might be
+$           ! unnecessary, but just in case there will be another error
+$           ! message further on that we don't want to miss)
+$           DEASSIGN /USER_MODE SYS$ERROR
+$           DEASSIGN /USER_MODE SYS$OUTPUT
+$         ELSE
+$           POINTER_SIZE = POINTER_SIZE + "=ARGV"
+$         ENDIF
+$         SET ON
+$       ENDIF
+$       POINTER_SIZE = " /POINTER_SIZE=''POINTER_SIZE'"
+$!
+$     ELSE
+$!
+$!      Tell The User Entered An Invalid Option.
+$!
+$       WRITE SYS$OUTPUT ""
+$       WRITE SYS$OUTPUT "The Option ", P6, -
+         " Is Invalid.  The Valid Options Are:"
+$       WRITE SYS$OUTPUT ""
+$       WRITE SYS$OUTPUT -
+         "    """"  :  Compile with default (short) pointers."
+$       WRITE SYS$OUTPUT -
+         "    32  :  Compile with 32-bit (short) pointers."
+$       WRITE SYS$OUTPUT -
+         "    64       :  Compile with 64-bit (long) pointers (auto ARGV)."
+$       WRITE SYS$OUTPUT -
+         "    64=      :  Compile with 64-bit (long) pointers (no ARGV)."
+$       WRITE SYS$OUTPUT -
+         "    64=ARGV  :  Compile with 64-bit (long) pointers (ARGV)."
+$       WRITE SYS$OUTPUT ""
+$! 
+$!      Time To EXIT.
+$!
+$       EXIT
+$!
+$     ENDIF
+$!
+$   ENDIF
+$!
+$! End The P6 (POINTER_SIZE) Check.
+$!
+$ ENDIF
+$!
+$! Set basic C compiler /INCLUDE directories.
+$!
+$ CC_INCLUDES = "SYS$DISK:[-],SYS$DISK:[-.CRYPTO]"
+$!
 $! Check To See If P2 Is Blank.
 $!
 $ IF (P2.EQS."")
@@ -581,7 +696,7 @@ $   ELSE
 $!
 $!  Check To See If We Have VAXC Or DECC.
 $!
-$     IF (ARCH.EQS."AXP").OR.(F$TRNLNM("DECC$CC_DEFAULT").NES."")
+$     IF (ARCH.NES."VAX").OR.(F$TRNLNM("DECC$CC_DEFAULT").NES."")
 $     THEN 
 $!
 $!      Looks Like DECC, Set To Use DECC.
@@ -658,11 +773,64 @@ $ CCDEFS = "MONOLITH"
 $ IF F$TYPE(USER_CCDEFS) .NES. "" THEN CCDEFS = CCDEFS + "," + USER_CCDEFS
 $ CCEXTRAFLAGS = ""
 $ IF F$TYPE(USER_CCFLAGS) .NES. "" THEN CCEXTRAFLAGS = USER_CCFLAGS
-$ CCDISABLEWARNINGS = "LONGLONGTYPE,LONGLONGSUFX,FOUNDCR"
+$ CCDISABLEWARNINGS = "" !!! "LONGLONGTYPE,LONGLONGSUFX,FOUNDCR"
 $ IF F$TYPE(USER_CCDISABLEWARNINGS) .NES. "" THEN -
 	CCDISABLEWARNINGS = CCDISABLEWARNINGS + "," + USER_CCDISABLEWARNINGS
 $!
-$!  Check To See If The User Entered A Valid Paramter.
+$! Check To See If We Have A ZLIB Option.
+$!
+$ ZLIB = P7
+$ IF (ZLIB .NES. "")
+$ THEN
+$!
+$!  Check for expected ZLIB files.
+$!
+$   err = 0
+$   file1 = f$parse( "zlib.h", ZLIB, , , "SYNTAX_ONLY")
+$   if (f$search( file1) .eqs. "")
+$   then
+$     WRITE SYS$OUTPUT ""
+$     WRITE SYS$OUTPUT "The Option ", ZLIB, " Is Invalid."
+$     WRITE SYS$OUTPUT "    Can't find header: ''file1'"
+$     err = 1
+$   endif
+$   file1 = f$parse( "A.;", ZLIB)- "A.;"
+$!
+$   file2 = f$parse( ZLIB, "libz.olb", , , "SYNTAX_ONLY")
+$   if (f$search( file2) .eqs. "")
+$   then
+$     if (err .eq. 0)
+$     then
+$       WRITE SYS$OUTPUT ""
+$       WRITE SYS$OUTPUT "The Option ", ZLIB, " Is Invalid."
+$     endif
+$     WRITE SYS$OUTPUT "    Can't find library: ''file2'"
+$     WRITE SYS$OUTPUT ""
+$     err = err+ 2
+$   endif
+$   if (err .eq. 1)
+$   then
+$     WRITE SYS$OUTPUT ""
+$   endif
+$!
+$   if (err .ne. 0)
+$   then
+$     EXIT
+$   endif
+$!
+$   CCDEFS = """ZLIB=1"", "+ CCDEFS
+$   CC_INCLUDES = CC_INCLUDES+ ", "+ file1
+$   ZLIB_LIB = ", ''file2' /library"
+$!
+$!  Print info
+$!
+$   WRITE SYS$OUTPUT "ZLIB library spec: ", file2
+$!
+$! End The ZLIB Check.
+$!
+$ ENDIF
+$!
+$!  Check To See If The User Entered A Valid Parameter.
 $!
 $ IF (P2.EQS."VAXC").OR.(P2.EQS."DECC").OR.(P2.EQS."GNUC")
 $ THEN
@@ -685,13 +853,13 @@ $!
 $     CC = "CC"
 $     IF ARCH.EQS."VAX" .AND. F$TRNLNM("DECC$CC_DEFAULT").NES."/DECC" -
 	 THEN CC = "CC/DECC"
-$     CC = CC + "/''CC_OPTIMIZE'/''DEBUGGER'/STANDARD=ANSI89" + -
-           "/NOLIST/PREFIX=ALL" + -
-	   "/INCLUDE=(SYS$DISK:[-],SYS$DISK:[-.CRYPTO])" + CCEXTRAFLAGS
+$     CC = CC + " /''CC_OPTIMIZE' /''DEBUGGER' /STANDARD=RELAXED"+ -
+       "''POINTER_SIZE' /NOLIST /PREFIX=ALL" + -
+       " /INCLUDE=(''CC_INCLUDES') " + CCEXTRAFLAGS
 $!
 $!    Define The Linker Options File Name.
 $!
-$     OPT_FILE = "SYS$DISK:[]VAX_DECC_OPTIONS.OPT"
+$     OPT_FILE = "VAX_DECC_OPTIONS.OPT"
 $!
 $!  End DECC Check.
 $!
@@ -712,14 +880,14 @@ $!
 $!    Compile Using VAXC.
 $!
 $     CC = "CC"
-$     IF ARCH.EQS."AXP"
+$     IF ARCH.NES."VAX"
 $     THEN
-$	WRITE SYS$OUTPUT "There is no VAX C on Alpha!"
+$	WRITE SYS$OUTPUT "There is no VAX C on ''ARCH'!"
 $	EXIT
 $     ENDIF
 $     IF F$TRNLNM("DECC$CC_DEFAULT").EQS."/DECC" THEN CC = "CC/VAXC"
 $     CC = CC + "/''CC_OPTIMIZE'/''DEBUGGER'/NOLIST" + -
-	   "/INCLUDE=(SYS$DISK:[-],SYS$DISK:[-.CRYPTO])" + CCEXTRAFLAGS
+	   "/INCLUDE=(''CC_INCLUDES')" + CCEXTRAFLAGS
 $     CCDEFS = CCDEFS + ",""VAXC"""
 $!
 $!    Define <sys> As SYS$COMMON:[SYSLIB]
@@ -728,7 +896,7 @@ $     DEFINE/NOLOG SYS SYS$COMMON:[SYSLIB]
 $!
 $!    Define The Linker Options File Name.
 $!
-$     OPT_FILE = "SYS$DISK:[]VAX_VAXC_OPTIONS.OPT"
+$     OPT_FILE = "VAX_VAXC_OPTIONS.OPT"
 $!
 $!  End VAXC Check
 $!
@@ -751,11 +919,11 @@ $!    Use GNU C...
 $!
 $     IF F$TYPE(GCC) .EQS. "" THEN GCC := GCC
 $     CC = GCC+"/NOCASE_HACK/''GCC_OPTIMIZE'/''DEBUGGER'/NOLIST" + -
-	   "/INCLUDE=(SYS$DISK:[-],SYS$DISK:[-.CRYPTO])" + CCEXTRAFLAGS
+	   "/INCLUDE=(''CC_INCLUDES')" + CCEXTRAFLAGS
 $!
 $!    Define The Linker Options File Name.
 $!
-$     OPT_FILE = "SYS$DISK:[]VAX_GNUC_OPTIONS.OPT"
+$     OPT_FILE = "VAX_GNUC_OPTIONS.OPT"
 $!
 $!  End The GNU C Check.
 $!
@@ -765,7 +933,7 @@ $!  Set up default defines
 $!
 $   CCDEFS = """FLAT_INC=1""," + CCDEFS
 $!
-$!  Else The User Entered An Invalid Arguement.
+$!  Else The User Entered An Invalid Argument.
 $!
 $ ELSE
 $!
@@ -797,7 +965,7 @@ $   THEN
 $!
 $!    Set the library to use SOCKETSHR
 $!
-$     TCPIP_LIB = "SYS$DISK:[-.VMS]SOCKETSHR_SHR.OPT/OPT"
+$     TCPIP_LIB = ",SYS$DISK:[-.VMS]SOCKETSHR_SHR.OPT /OPTIONS"
 $!
 $!    Done with SOCKETSHR
 $!
@@ -823,13 +991,13 @@ $   THEN
 $!
 $!    Set the library to use UCX.
 $!
-$     TCPIP_LIB = "SYS$DISK:[-.VMS]UCX_SHR_DECC.OPT/OPT"
+$     TCPIP_LIB = ",SYS$DISK:[-.VMS]UCX_SHR_DECC.OPT /OPTIONS"
 $     IF F$TRNLNM("UCX$IPC_SHR") .NES. ""
 $     THEN
-$       TCPIP_LIB = "SYS$DISK:[-.VMS]UCX_SHR_DECC_LOG.OPT/OPT"
+$       TCPIP_LIB = ",SYS$DISK:[-.VMS]UCX_SHR_DECC_LOG.OPT /OPTIONS"
 $     ELSE
 $       IF COMPILER .NES. "DECC" .AND. ARCH .EQS. "VAX" THEN -
-	  TCPIP_LIB = "SYS$DISK:[-.VMS]UCX_SHR_VAXC.OPT/OPT"
+	  TCPIP_LIB = ",SYS$DISK:[-.VMS]UCX_SHR_VAXC.OPT /OPTIONS"
 $     ENDIF
 $!
 $!    Done with UCX
@@ -843,7 +1011,7 @@ $   THEN
 $!
 $!    Set the library to use TCPIP.
 $!
-$     TCPIP_LIB = "SYS$DISK:[-.VMS]TCPIP_SHR_DECC.OPT/OPT"
+$     TCPIP_LIB = ",SYS$DISK:[-.VMS]TCPIP_SHR_DECC.OPT /OPTIONS"
 $!
 $!    Done with TCPIP
 $!
@@ -868,9 +1036,9 @@ $   CCDEFS = CCDEFS + ",TCPIP_TYPE_''P3'"
 $!
 $!  Print info
 $!
-$   WRITE SYS$OUTPUT "TCP/IP library spec: ", TCPIP_LIB
+$   WRITE SYS$OUTPUT "TCP/IP library spec: ", TCPIP_LIB- ","
 $!
-$!  Else The User Entered An Invalid Arguement.
+$!  Else The User Entered An Invalid Argument.
 $!
 $ ELSE
 $!
@@ -898,13 +1066,13 @@ $ IF COMPILER .EQS. "DECC"
 $ THEN
 $   IF CCDISABLEWARNINGS .NES. ""
 $   THEN
-$     CCDISABLEWARNINGS = "/WARNING=(DISABLE=(" + CCDISABLEWARNINGS + "))"
+$     CCDISABLEWARNINGS = " /WARNING=(DISABLE=(" + CCDISABLEWARNINGS + "))"
 $   ENDIF
 $ ELSE
 $   CCDISABLEWARNINGS = ""
 $ ENDIF
-$ CC2 = CC + "/DEFINE=(" + CCDEFS + ",_POSIX_C_SOURCE)" + CCDISABLEWARNINGS
-$ CC = CC + "/DEFINE=(" + CCDEFS + ")" + CCDISABLEWARNINGS
+$ CC2 = CC + " /DEFINE=(" + CCDEFS + ",_POSIX_C_SOURCE)" + CCDISABLEWARNINGS
+$ CC = CC + " /DEFINE=(" + CCDEFS + ")" + CCDISABLEWARNINGS
 $!
 $! Show user the result
 $!
@@ -970,7 +1138,7 @@ $ __INCLUDE = __TOP + "INCLUDE.OPENSSL]"
 $!
 $! Set up the logical name OPENSSL to point at the include directory
 $!
-$ DEFINE OPENSSL/NOLOG '__INCLUDE'
+$ DEFINE OPENSSL /NOLOG '__INCLUDE'
 $!
 $! Done
 $!
@@ -978,15 +1146,24 @@ $ RETURN
 $!
 $ CLEANUP:
 $!
-$! Restore the logical name OPENSSL if it had a value
+$! Restore the saved logical name OPENSSL, if it had a value.
 $!
-$ IF __SAVE_OPENSSL .EQS. ""
-$ THEN
-$   DEASSIGN OPENSSL
-$ ELSE
-$   DEFINE/NOLOG OPENSSL '__SAVE_OPENSSL'
-$ ENDIF
+$ if (f$type( __SAVE_OPENSSL) .nes. "")
+$ then
+$   IF __SAVE_OPENSSL .EQS. ""
+$   THEN
+$     DEASSIGN OPENSSL
+$   ELSE
+$     DEFINE /NOLOG OPENSSL '__SAVE_OPENSSL'
+$   ENDIF
+$ endif
+$!
+$! Close any open files.
+$!
+$ if (f$trnlnm( "objects", "LNM$PROCESS", 0, "SUPERVISOR") .nes. "") then -
+   close objects
 $!
 $! Done
 $!
 $ RETURN
+$!

apps/ocsp.c

@@ -62,6 +62,8 @@
 				   on OpenVMS */
 #endif
 
+#define USE_SOCKETS
+
 #include <stdio.h>
 #include <stdlib.h>
 #include <string.h>
@@ -73,6 +75,7 @@
 #include <openssl/ssl.h>
 #include <openssl/evp.h>
 #include <openssl/bn.h>
+#include <openssl/x509v3.h>
 
 #if defined(NETWARE_CLIB)
 #  ifdef NETWARE_BSDSOCK
@@ -97,7 +100,7 @@ static int add_ocsp_cert(OCSP_REQUEST **req, X509 *cert, const EVP_MD *cert_id_m
 static int add_ocsp_serial(OCSP_REQUEST **req, char *serial, const EVP_MD * cert_id_md, X509 *issuer,
 				STACK_OF(OCSP_CERTID) *ids);
 static int print_ocsp_summary(BIO *out, OCSP_BASICRESP *bs, OCSP_REQUEST *req,
-			      STACK_OF(STRING) *names,
+			      STACK_OF(OPENSSL_STRING) *names,
 			      STACK_OF(OCSP_CERTID) *ids, long nsec,
 			      long maxage);
 
@@ -111,6 +114,7 @@ static BIO *init_responder(char *port);
 static int do_responder(OCSP_REQUEST **preq, BIO **pcbio, BIO *acbio, char *port);
 static int send_ocsp_response(BIO *cbio, OCSP_RESPONSE *resp);
 static OCSP_RESPONSE *query_responder(BIO *err, BIO *cbio, char *path,
+				STACK_OF(CONF_VALUE) *headers,
 				OCSP_REQUEST *req, int req_timeout);
 
 #undef PROG
@@ -129,6 +133,7 @@ int MAIN(int argc, char **argv)
 	char *rsignfile = NULL, *rkeyfile = NULL;
 	char *outfile = NULL;
 	int add_nonce = 1, noverify = 0, use_ssl = -1;
+	STACK_OF(CONF_VALUE) *headers = NULL;
 	OCSP_REQUEST *req = NULL;
 	OCSP_RESPONSE *resp = NULL;
 	OCSP_BASICRESP *bs = NULL;
@@ -151,7 +156,7 @@ int MAIN(int argc, char **argv)
 	int badarg = 0;
 	int i;
 	int ignore_err = 0;
-	STACK_OF(STRING) *reqnames = NULL;
+	STACK_OF(OPENSSL_STRING) *reqnames = NULL;
 	STACK_OF(OCSP_CERTID) *ids = NULL;
 
 	X509 *rca_cert = NULL;
@@ -168,7 +173,7 @@ int MAIN(int argc, char **argv)
 	SSL_load_error_strings();
 	OpenSSL_add_ssl_algorithms();
 	args = argv + 1;
-	reqnames = sk_STRING_new_null();
+	reqnames = sk_OPENSSL_STRING_new_null();
 	ids = sk_OCSP_CERTID_new_null();
 	while (!badarg && *args && *args[0] == '-')
 		{
@@ -228,6 +233,16 @@ int MAIN(int argc, char **argv)
 				}
 			else badarg = 1;
 			}
+		else if (!strcmp(*args, "-header"))
+			{
+			if (args[1] && args[2])
+				{
+				if (!X509V3_add_value(args[1], args[2], &headers))
+					goto end;
+				args += 2;
+				}
+			else badarg = 1;
+			}
 		else if (!strcmp(*args, "-ignore_err"))
 			ignore_err = 1;
 		else if (!strcmp(*args, "-noverify"))
@@ -430,7 +445,7 @@ int MAIN(int argc, char **argv)
 				if (!cert_id_md) cert_id_md = EVP_sha1();
 				if(!add_ocsp_cert(&req, cert, cert_id_md, issuer, ids))
 					goto end;
-				if(!sk_STRING_push(reqnames, *args))
+				if(!sk_OPENSSL_STRING_push(reqnames, *args))
 					goto end;
 				}
 			else badarg = 1;
@@ -443,7 +458,7 @@ int MAIN(int argc, char **argv)
 				if (!cert_id_md) cert_id_md = EVP_sha1();
 				if(!add_ocsp_serial(&req, *args, cert_id_md, issuer, ids))
 					goto end;
-				if(!sk_STRING_push(reqnames, *args))
+				if(!sk_OPENSSL_STRING_push(reqnames, *args))
 					goto end;
 				}
 			else badarg = 1;
@@ -754,7 +769,7 @@ int MAIN(int argc, char **argv)
 		{
 #ifndef OPENSSL_NO_SOCK
 		resp = process_responder(bio_err, req, host, path,
-						port, use_ssl, req_timeout);
+					port, use_ssl, headers, req_timeout);
 		if (!resp)
 			goto end;
 #else
@@ -899,10 +914,11 @@ end:
 	OCSP_REQUEST_free(req);
 	OCSP_RESPONSE_free(resp);
 	OCSP_BASICRESP_free(bs);
-	sk_STRING_free(reqnames);
+	sk_OPENSSL_STRING_free(reqnames);
 	sk_OCSP_CERTID_free(ids);
 	sk_X509_pop_free(sign_other, X509_free);
 	sk_X509_pop_free(verify_other, X509_free);
+	sk_CONF_VALUE_pop_free(headers, X509V3_conf_free);
 
 	if (use_ssl != -1)
 		{
@@ -969,7 +985,7 @@ static int add_ocsp_serial(OCSP_REQUEST **req, char *serial,const EVP_MD *cert_i
 	}
 
 static int print_ocsp_summary(BIO *out, OCSP_BASICRESP *bs, OCSP_REQUEST *req,
-			      STACK_OF(STRING) *names,
+			      STACK_OF(OPENSSL_STRING) *names,
 			      STACK_OF(OCSP_CERTID) *ids, long nsec,
 			      long maxage)
 	{
@@ -981,13 +997,13 @@ static int print_ocsp_summary(BIO *out, OCSP_BASICRESP *bs, OCSP_REQUEST *req,
 
 	ASN1_GENERALIZEDTIME *rev, *thisupd, *nextupd;
 
-	if (!bs || !req || !sk_STRING_num(names) || !sk_OCSP_CERTID_num(ids))
+	if (!bs || !req || !sk_OPENSSL_STRING_num(names) || !sk_OCSP_CERTID_num(ids))
 		return 1;
 
 	for (i = 0; i < sk_OCSP_CERTID_num(ids); i++)
 		{
 		id = sk_OCSP_CERTID_value(ids, i);
-		name = sk_STRING_value(names, i);
+		name = sk_OPENSSL_STRING_value(names, i);
 		BIO_printf(out, "%s: ", name);
 
 		if(!OCSP_resp_find_status(bs, id, &status, &reason,
@@ -1258,10 +1274,12 @@ static int send_ocsp_response(BIO *cbio, OCSP_RESPONSE *resp)
 	}
 
 static OCSP_RESPONSE *query_responder(BIO *err, BIO *cbio, char *path,
+				STACK_OF(CONF_VALUE) *headers,
 				OCSP_REQUEST *req, int req_timeout)
 	{
 	int fd;
 	int rv;
+	int i;
 	OCSP_REQ_CTX *ctx = NULL;
 	OCSP_RESPONSE *rsp = NULL;
 	fd_set confds;
@@ -1278,16 +1296,13 @@ static OCSP_RESPONSE *query_responder(BIO *err, BIO *cbio, char *path,
 		return NULL;
 		}
 
-	if (req_timeout == -1)
-		return OCSP_sendreq_bio(cbio, path, req);
-
 	if (BIO_get_fd(cbio, &fd) <= 0)
 		{
 		BIO_puts(err, "Can't get connection fd\n");
 		goto err;
 		}
 
-	if (rv <= 0)
+	if (req_timeout != -1 && rv <= 0)
 		{
 		FD_ZERO(&confds);
 		openssl_fdset(fd, &confds);
@@ -1302,15 +1317,27 @@ static OCSP_RESPONSE *query_responder(BIO *err, BIO *cbio, char *path,
 		}
 
 
-	ctx = OCSP_sendreq_new(cbio, path, req, -1);
+	ctx = OCSP_sendreq_new(cbio, path, NULL, -1);
 	if (!ctx)
 		return NULL;
+
+	for (i = 0; i < sk_CONF_VALUE_num(headers); i++)
+		{
+		CONF_VALUE *hdr = sk_CONF_VALUE_value(headers, i);
+		if (!OCSP_REQ_CTX_add1_header(ctx, hdr->name, hdr->value))
+			goto err;
+		}
+
+	if (!OCSP_REQ_CTX_set1_req(ctx, req))
+		goto err;
 	
 	for (;;)
 		{
 		rv = OCSP_sendreq_nbio(&rsp, ctx);
 		if (rv != -1)
 			break;
+		if (req_timeout == -1)
+			continue;
 		FD_ZERO(&confds);
 		openssl_fdset(fd, &confds);
 		tv.tv_usec = 0;
@@ -1334,7 +1361,7 @@ static OCSP_RESPONSE *query_responder(BIO *err, BIO *cbio, char *path,
 			BIO_puts(err, "Select error\n");
 			break;
 			}
-			
+
 		}
 	err:
 	if (ctx)
@@ -1345,6 +1372,7 @@ static OCSP_RESPONSE *query_responder(BIO *err, BIO *cbio, char *path,
 
 OCSP_RESPONSE *process_responder(BIO *err, OCSP_REQUEST *req,
 			char *host, char *path, char *port, int use_ssl,
+			STACK_OF(CONF_VALUE) *headers,
 			int req_timeout)
 	{
 	BIO *cbio = NULL;
@@ -1379,14 +1407,14 @@ OCSP_RESPONSE *process_responder(BIO *err, OCSP_REQUEST *req,
 		sbio = BIO_new_ssl(ctx, 1);
 		cbio = BIO_push(sbio, cbio);
 		}
-	resp = query_responder(err, cbio, path, req, req_timeout);
+	resp = query_responder(err, cbio, path, headers, req, req_timeout);
 	if (!resp)
 		BIO_printf(bio_err, "Error querying OCSP responsder\n");
 	end:
-	if (ctx)
-		SSL_CTX_free(ctx);
 	if (cbio)
 		BIO_free_all(cbio);
+	if (ctx)
+		SSL_CTX_free(ctx);
 	return resp;
 	}
 

apps/openssl-vms.cnf

@@ -145,7 +145,7 @@ localityName			= Locality Name (eg, city)
 organizationalUnitName		= Organizational Unit Name (eg, section)
 #organizationalUnitName_default	=
 
-commonName			= Common Name (eg, YOUR name)
+commonName			= Common Name (e.g. server FQDN or YOUR name)
 commonName_max			= 64
 
 emailAddress			= Email Address
@@ -231,7 +231,7 @@ keyUsage = nonRepudiation, digitalSignature, keyEncipherment
 
 subjectKeyIdentifier=hash
 
-authorityKeyIdentifier=keyid:always,issuer:always
+authorityKeyIdentifier=keyid:always,issuer
 
 # This is what PKIX recommends but some broken software chokes on critical
 # extensions.
@@ -264,7 +264,7 @@ basicConstraints = CA:true
 # Only issuerAltName and authorityKeyIdentifier make any sense in a CRL.
 
 # issuerAltName=issuer:copy
-authorityKeyIdentifier=keyid:always,issuer:always
+authorityKeyIdentifier=keyid:always
 
 [ proxy_cert_ext ]
 # These extensions should be added when creating a proxy certificate
@@ -297,7 +297,7 @@ nsComment			= "OpenSSL Generated Certificate"
 
 # PKIX recommendations harmless if included in all certificates.
 subjectKeyIdentifier=hash
-authorityKeyIdentifier=keyid,issuer:always
+authorityKeyIdentifier=keyid,issuer
 
 # This stuff is for subjectAltName and issuerAltname.
 # Import the email address.

apps/openssl.c

@@ -129,6 +129,9 @@
 #include "progs.h"
 #include "s_apps.h"
 #include <openssl/err.h>
+#ifdef OPENSSL_FIPS
+#include <openssl/fips.h>
+#endif
 
 /* The LHASH callbacks ("hash" & "cmp") have been replaced by functions with the
  * base prototypes (we cast each variable inside the function to the required
@@ -212,8 +215,13 @@ static void lock_dbg_cb(int mode, int type, const char *file, int line)
 		}
 	}
 
+#if defined( OPENSSL_SYS_VMS) && (__INITIAL_POINTER_SIZE == 64)
+# define ARGV _Argv
+#else
+# define ARGV Argv
+#endif
 
-int main(int Argc, char *Argv[])
+int main(int Argc, char *ARGV[])
 	{
 	ARGS arg;
 #define PROG_NAME_SIZE	39
@@ -227,7 +235,55 @@ int main(int Argc, char *Argv[])
 	char **argv,*p;
 	LHASH_OF(FUNCTION) *prog=NULL;
 	long errline;
- 
+
+#if defined( OPENSSL_SYS_VMS) && (__INITIAL_POINTER_SIZE == 64)
+	/* 2011-03-22 SMS.
+	 * If we have 32-bit pointers everywhere, then we're safe, and
+	 * we bypass this mess, as on non-VMS systems.  (See ARGV,
+	 * above.)
+	 * Problem 1: Compaq/HP C before V7.3 always used 32-bit
+	 * pointers for argv[].
+	 * Fix 1: For a 32-bit argv[], when we're using 64-bit pointers
+	 * everywhere else, we always allocate and use a 64-bit
+	 * duplicate of argv[].
+	 * Problem 2: Compaq/HP C V7.3 (Alpha, IA64) before ECO1 failed
+	 * to NULL-terminate a 64-bit argv[].  (As this was written, the
+	 * compiler ECO was available only on IA64.)
+	 * Fix 2: Unless advised not to (VMS_TRUST_ARGV), we test a
+	 * 64-bit argv[argc] for NULL, and, if necessary, use a
+	 * (properly) NULL-terminated (64-bit) duplicate of argv[].
+	 * The same code is used in either case to duplicate argv[].
+	 * Some of these decisions could be handled in preprocessing,
+	 * but the code tends to get even uglier, and the penalty for
+	 * deciding at compile- or run-time is tiny.
+	 */
+	char **Argv = NULL;
+	int free_Argv = 0;
+
+	if ((sizeof( _Argv) < 8)        /* 32-bit argv[]. */
+# if !defined( VMS_TRUST_ARGV)
+	 || (_Argv[ Argc] != NULL)      /* Untrusted argv[argc] not NULL. */
+# endif
+		)
+		{
+		int i;
+		Argv = OPENSSL_malloc( (Argc+ 1)* sizeof( char *));
+		if (Argv == NULL)
+			{ ret = -1; goto end; }
+		for(i = 0; i < Argc; i++)
+			Argv[i] = _Argv[i];
+		Argv[ Argc] = NULL;     /* Certain NULL termination. */
+		free_Argv = 1;
+		}
+	else
+		{
+		/* Use the known-good 32-bit argv[] (which needs the
+		 * type cast to satisfy the compiler), or the trusted or
+		 * tested-good 64-bit argv[] as-is. */
+		Argv = (char **)_Argv;
+		}
+#endif /* defined( OPENSSL_SYS_VMS) && (__INITIAL_POINTER_SIZE == 64) */
+
 	arg.data=NULL;
 	arg.count=0;
 
@@ -257,6 +313,19 @@ int main(int Argc, char *Argv[])
 		CRYPTO_set_locking_callback(lock_dbg_cb);
 		}
 
+	if(getenv("OPENSSL_FIPS")) {
+#ifdef OPENSSL_FIPS
+		if (!FIPS_mode_set(1)) {
+			ERR_load_crypto_strings();
+			ERR_print_errors(BIO_new_fp(stderr,BIO_NOCLOSE));
+			EXIT(1);
+		}
+#else
+		fprintf(stderr, "FIPS mode not supported.\n");
+		EXIT(1);
+#endif
+		}
+
 	apps_startup();
 
 	/* Lets load up our environment a little */
@@ -330,7 +399,8 @@ int main(int Argc, char *Argv[])
 			else	prompt="OpenSSL> ";
 			fputs(prompt,stdout);
 			fflush(stdout);
-			fgets(p,n,stdin);
+			if (!fgets(p,n,stdin))
+				goto end;
 			if (p[0] == '\0') goto end;
 			i=strlen(p);
 			if (i <= 1) break;
@@ -372,6 +442,13 @@ end:
 		BIO_free(bio_err);
 		bio_err=NULL;
 		}
+#if defined( OPENSSL_SYS_VMS) && (__INITIAL_POINTER_SIZE == 64)
+	/* Free any duplicate Argv[] storage. */
+	if (free_Argv)
+		{
+		OPENSSL_free(Argv);
+		}
+#endif
 	OPENSSL_EXIT(ret);
 	}
 
@@ -392,6 +469,21 @@ static int do_cmd(LHASH_OF(FUNCTION) *prog, int argc, char *argv[])
 		{ ret=0; goto end; }
 	f.name=argv[0];
 	fp=lh_FUNCTION_retrieve(prog,&f);
+	if (fp == NULL)
+		{
+		if (EVP_get_digestbyname(argv[0]))
+			{
+			f.type = FUNC_TYPE_MD;
+			f.func = dgst_main;
+			fp = &f;
+			}
+		else if (EVP_get_cipherbyname(argv[0]))
+			{
+			f.type = FUNC_TYPE_CIPHER;
+			f.func = enc_main;
+			fp = &f;
+			}
+		}
 	if (fp != NULL)
 		{
 		ret=fp->func(argc,argv);

apps/openssl.cnf

@@ -145,7 +145,7 @@ localityName			= Locality Name (eg, city)
 organizationalUnitName		= Organizational Unit Name (eg, section)
 #organizationalUnitName_default	=
 
-commonName			= Common Name (eg, YOUR name)
+commonName			= Common Name (e.g. server FQDN or YOUR name)
 commonName_max			= 64
 
 emailAddress			= Email Address
@@ -231,7 +231,7 @@ keyUsage = nonRepudiation, digitalSignature, keyEncipherment
 
 subjectKeyIdentifier=hash
 
-authorityKeyIdentifier=keyid:always,issuer:always
+authorityKeyIdentifier=keyid:always,issuer
 
 # This is what PKIX recommends but some broken software chokes on critical
 # extensions.
@@ -264,7 +264,7 @@ basicConstraints = CA:true
 # Only issuerAltName and authorityKeyIdentifier make any sense in a CRL.
 
 # issuerAltName=issuer:copy
-authorityKeyIdentifier=keyid:always,issuer:always
+authorityKeyIdentifier=keyid:always
 
 [ proxy_cert_ext ]
 # These extensions should be added when creating a proxy certificate
@@ -297,7 +297,7 @@ nsComment			= "OpenSSL Generated Certificate"
 
 # PKIX recommendations harmless if included in all certificates.
 subjectKeyIdentifier=hash
-authorityKeyIdentifier=keyid,issuer:always
+authorityKeyIdentifier=keyid,issuer
 
 # This stuff is for subjectAltName and issuerAltname.
 # Import the email address.

apps/pkcs12.c

@@ -117,7 +117,7 @@ int MAIN(int argc, char **argv)
     int ret = 1;
     int macver = 1;
     int noprompt = 0;
-    STACK_OF(STRING) *canames = NULL;
+    STACK_OF(OPENSSL_STRING) *canames = NULL;
     char *cpass = NULL, *mpass = NULL;
     char *passargin = NULL, *passargout = NULL, *passarg = NULL;
     char *passin = NULL, *passout = NULL;
@@ -222,8 +222,8 @@ int MAIN(int argc, char **argv)
 		} else if (!strcmp (*args, "-caname")) {
 		    if (args[1]) {
 			args++;	
-			if (!canames) canames = sk_STRING_new_null();
-			sk_STRING_push(canames, *args);
+			if (!canames) canames = sk_OPENSSL_STRING_new_null();
+			sk_OPENSSL_STRING_push(canames, *args);
 		    } else badarg = 1;
 		} else if (!strcmp (*args, "-in")) {
 		    if (args[1]) {
@@ -549,9 +549,9 @@ int MAIN(int argc, char **argv)
 
 	/* Add any CA names */
 
-	for (i = 0; i < sk_STRING_num(canames); i++)
+	for (i = 0; i < sk_OPENSSL_STRING_num(canames); i++)
 		{
-		catmp = (unsigned char *)sk_STRING_value(canames, i);
+		catmp = (unsigned char *)sk_OPENSSL_STRING_value(canames, i);
 		X509_alias_set1(sk_X509_value(certs, i), catmp, -1);
 		}
 
@@ -647,7 +647,7 @@ int MAIN(int argc, char **argv)
 
     if (!twopass) BUF_strlcpy(macpass, pass, sizeof macpass);
 
-    if (options & INFO) BIO_printf (bio_err, "MAC Iteration %ld\n", p12->mac->iter ? ASN1_INTEGER_get (p12->mac->iter) : 1);
+    if ((options & INFO) && p12->mac) BIO_printf (bio_err, "MAC Iteration %ld\n", p12->mac->iter ? ASN1_INTEGER_get (p12->mac->iter) : 1);
     if(macver) {
 #ifdef CRYPTO_MDEBUG
     CRYPTO_push_info("verify MAC");
@@ -687,7 +687,7 @@ int MAIN(int argc, char **argv)
 #endif
     BIO_free(in);
     BIO_free_all(out);
-    if (canames) sk_STRING_free(canames);
+    if (canames) sk_OPENSSL_STRING_free(canames);
     if(passin) OPENSSL_free(passin);
     if(passout) OPENSSL_free(passout);
     apps_shutdown();
@@ -923,7 +923,7 @@ int print_attribs (BIO *out, STACK_OF(X509_ATTRIBUTE) *attrlst,const char *name)
 			av = sk_ASN1_TYPE_value(attr->value.set, 0);
 			switch(av->type) {
 				case V_ASN1_BMPSTRING:
-        			value = uni2asc(av->value.bmpstring->data,
+        			value = OPENSSL_uni2asc(av->value.bmpstring->data,
                                 	       av->value.bmpstring->length);
 				BIO_printf(out, "%s\n", value);
 				OPENSSL_free(value);

apps/pkcs7.c

@@ -82,9 +82,6 @@ int MAIN(int, char **);
 
 int MAIN(int argc, char **argv)
 	{
-#ifndef OPENSSL_NO_ENGINE
-	ENGINE *e = NULL;
-#endif
 	PKCS7 *p7=NULL;
 	int i,badops=0;
 	BIO *in=NULL,*out=NULL;
@@ -182,7 +179,7 @@ bad:
 	ERR_load_crypto_strings();
 
 #ifndef OPENSSL_NO_ENGINE
-        e = setup_engine(bio_err, engine, 0);
+        setup_engine(bio_err, engine, 0);
 #endif
 
 	in=BIO_new(BIO_s_file());

apps/pkcs8.c

@@ -275,7 +275,6 @@ int MAIN(int argc, char **argv)
 		}
 	if (topk8)
 		{
-		BIO_free(in); /* Not needed in this section */
 		pkey = load_key(bio_err, infile, informat, 1,
 			passin, e, "key");
 		if (!pkey)
@@ -404,6 +403,10 @@ int MAIN(int argc, char **argv)
 			BIO_printf(bio_err, "DSA public key include in PrivateKey\n");
 			break;
 
+			case PKCS8_NEG_PRIVKEY:
+			BIO_printf(bio_err, "DSA private key value is negative\n");
+			break;
+
 			default:
 			BIO_printf(bio_err, "Unknown broken type\n");
 			break;

apps/pkeyparam.c

@@ -74,7 +74,6 @@ int MAIN(int argc, char **argv)
 	EVP_PKEY *pkey=NULL;
 	int badarg = 0;
 #ifndef OPENSSL_NO_ENGINE
-	ENGINE *e = NULL;
 	char *engine=NULL;
 #endif
 	int ret = 1;
@@ -141,7 +140,7 @@ int MAIN(int argc, char **argv)
 		}
 
 #ifndef OPENSSL_NO_ENGINE
-        e = setup_engine(bio_err, engine, 0);
+        setup_engine(bio_err, engine, 0);
 #endif
 
 	if (infile)
@@ -179,7 +178,7 @@ int MAIN(int argc, char **argv)
 	pkey = PEM_read_bio_Parameters(in, NULL);
 	if (!pkey)
 		{
-		BIO_printf(bio_err, "Error reading paramters\n");
+		BIO_printf(bio_err, "Error reading parameters\n");
 		ERR_print_errors(bio_err);
 		goto end;
 		}

apps/pkeyutl.c

@@ -119,17 +119,17 @@ int MAIN(int argc, char **argv)
 		if (!strcmp(*argv,"-in"))
 			{
 			if (--argc < 1) badarg = 1;
-                        infile= *(++argv);
+                        else infile= *(++argv);
 			}
 		else if (!strcmp(*argv,"-out"))
 			{
 			if (--argc < 1) badarg = 1;
-			outfile= *(++argv);
+			else outfile= *(++argv);
 			}
 		else if (!strcmp(*argv,"-sigfile"))
 			{
 			if (--argc < 1) badarg = 1;
-			sigfile= *(++argv);
+			else sigfile= *(++argv);
 			}
 		else if(!strcmp(*argv, "-inkey"))
 			{
@@ -159,17 +159,17 @@ int MAIN(int argc, char **argv)
 		else if (!strcmp(*argv,"-passin"))
 			{
 			if (--argc < 1) badarg = 1;
-			passargin= *(++argv);
+			else passargin= *(++argv);
 			}
 		else if (strcmp(*argv,"-peerform") == 0)
 			{
 			if (--argc < 1) badarg = 1;
-			peerform=str2fmt(*(++argv));
+			else peerform=str2fmt(*(++argv));
 			}
 		else if (strcmp(*argv,"-keyform") == 0)
 			{
 			if (--argc < 1) badarg = 1;
-			keyform=str2fmt(*(++argv));
+			else keyform=str2fmt(*(++argv));
 			}
 #ifndef OPENSSL_NO_ENGINE
 		else if(!strcmp(*argv, "-engine"))
@@ -390,7 +390,7 @@ static void usage()
 	BIO_printf(bio_err, "Usage: pkeyutl [options]\n");
 	BIO_printf(bio_err, "-in file        input file\n");
 	BIO_printf(bio_err, "-out file       output file\n");
-	BIO_printf(bio_err, "-signature file signature file (verify operation only)\n");
+	BIO_printf(bio_err, "-sigfile file signature file (verify operation only)\n");
 	BIO_printf(bio_err, "-inkey file     input key\n");
 	BIO_printf(bio_err, "-keyform arg    private key format - default PEM\n");
 	BIO_printf(bio_err, "-pubin          input is a public key\n");

apps/progs.h

@@ -46,6 +46,7 @@ extern int engine_main(int argc,char *argv[]);
 extern int ocsp_main(int argc,char *argv[]);
 extern int prime_main(int argc,char *argv[]);
 extern int ts_main(int argc,char *argv[]);
+extern int srp_main(int argc,char *argv[]);
 
 #define FUNC_TYPE_GENERAL	1
 #define FUNC_TYPE_MD		2
@@ -142,9 +143,14 @@ FUNCTION functions[] = {
 #ifndef OPENSSL_NO_ENGINE
 	{FUNC_TYPE_GENERAL,"engine",engine_main},
 #endif
+#ifndef OPENSSL_NO_OCSP
 	{FUNC_TYPE_GENERAL,"ocsp",ocsp_main},
+#endif
 	{FUNC_TYPE_GENERAL,"prime",prime_main},
 	{FUNC_TYPE_GENERAL,"ts",ts_main},
+#ifndef OPENSSL_NO_SRP
+	{FUNC_TYPE_GENERAL,"srp",srp_main},
+#endif
 #ifndef OPENSSL_NO_MD2
 	{FUNC_TYPE_MD,"md2",dgst_main},
 #endif

apps/progs.pl

@@ -22,6 +22,7 @@ typedef struct {
 	const char *name;
 	int (*func)(int argc,char *argv[]);
 	} FUNCTION;
+DECLARE_LHASH_OF(FUNCTION);
 
 FUNCTION functions[] = {
 EOF
@@ -48,6 +49,10 @@ foreach (@ARGV)
 		{ print "#if !defined(OPENSSL_NO_DES) && !defined(OPENSSL_NO_SHA1)\n${str}#endif\n"; }
 	elsif ( ($_ =~ /^cms$/))
 		{ print "#ifndef OPENSSL_NO_CMS\n${str}#endif\n"; }
+	elsif ( ($_ =~ /^ocsp$/))
+		{ print "#ifndef OPENSSL_NO_OCSP\n${str}#endif\n"; }
+	elsif ( ($_ =~ /^srp$/))
+		{ print "#ifndef OPENSSL_NO_SRP\n${str}#endif\n"; }
 	else
 		{ print $str; }
 	}

apps/rand.c

@@ -77,9 +77,6 @@ int MAIN(int, char **);
 
 int MAIN(int argc, char **argv)
 	{
-#ifndef OPENSSL_NO_ENGINE
-	ENGINE *e = NULL;
-#endif
 	int i, r, ret = 1;
 	int badopt;
 	char *outfile = NULL;
@@ -178,7 +175,7 @@ int MAIN(int argc, char **argv)
 		}
 
 #ifndef OPENSSL_NO_ENGINE
-        e = setup_engine(bio_err, engine, 0);
+        setup_engine(bio_err, engine, 0);
 #endif
 
 	app_RAND_load_file(NULL, bio_err, (inrand != NULL));

apps/req.c

@@ -165,7 +165,7 @@ int MAIN(int argc, char **argv)
 	EVP_PKEY_CTX *genctx = NULL;
 	const char *keyalg = NULL;
 	char *keyalgstr = NULL;
-	STACK_OF(STRING) *pkeyopts = NULL;
+	STACK_OF(OPENSSL_STRING) *pkeyopts = NULL, *sigopts = NULL;
 	EVP_PKEY *pkey=NULL;
 	int i=0,badops=0,newreq=0,verbose=0,pkey_type=-1;
 	long newkey = -1;
@@ -306,8 +306,17 @@ int MAIN(int argc, char **argv)
 			if (--argc < 1)
 				goto bad;
 			if (!pkeyopts)
-				pkeyopts = sk_STRING_new_null();
-			if (!pkeyopts || !sk_STRING_push(pkeyopts, *(++argv)))
+				pkeyopts = sk_OPENSSL_STRING_new_null();
+			if (!pkeyopts || !sk_OPENSSL_STRING_push(pkeyopts, *(++argv)))
+				goto bad;
+			}
+		else if (strcmp(*argv,"-sigopt") == 0)
+			{
+			if (--argc < 1)
+				goto bad;
+			if (!sigopts)
+				sigopts = sk_OPENSSL_STRING_new_null();
+			if (!sigopts || !sk_OPENSSL_STRING_push(sigopts, *(++argv)))
 				goto bad;
 			}
 		else if (strcmp(*argv,"-batch") == 0)
@@ -365,11 +374,6 @@ int MAIN(int argc, char **argv)
 			serial = s2i_ASN1_INTEGER(NULL, *(++argv));
 			if (!serial) goto bad;
 			}
-		else if ((md_alg=EVP_get_digestbyname(&((*argv)[1]))) != NULL)
-			{
-			/* ok */
-			digest=md_alg;
-			}
 		else if (strcmp(*argv,"-extensions") == 0)
 			{
 			if (--argc < 1) goto bad;
@@ -380,6 +384,11 @@ int MAIN(int argc, char **argv)
 			if (--argc < 1) goto bad;
 			req_exts = *(++argv);
 			}
+		else if ((md_alg=EVP_get_digestbyname(&((*argv)[1]))) != NULL)
+			{
+			/* ok */
+			digest=md_alg;
+			}
 		else
 			{
 			BIO_printf(bio_err,"unknown option %s\n",*argv);
@@ -667,9 +676,9 @@ bad:
 		if (pkeyopts)
 			{
 			char *genopt;
-			for (i = 0; i < sk_STRING_num(pkeyopts); i++)
+			for (i = 0; i < sk_OPENSSL_STRING_num(pkeyopts); i++)
 				{
-				genopt = sk_STRING_value(pkeyopts, i);
+				genopt = sk_OPENSSL_STRING_value(pkeyopts, i);
 				if (pkey_ctrl_string(genctx, genopt) <= 0)
 					{
 					BIO_printf(bio_err,
@@ -858,8 +867,9 @@ loop:
 					extensions);
 				goto end;
 				}
-			
-			if (!(i=X509_sign(x509ss,pkey,digest)))
+
+			i=do_X509_sign(bio_err, x509ss, pkey, digest, sigopts);
+			if (!i)
 				{
 				ERR_print_errors(bio_err);
 				goto end;
@@ -883,7 +893,8 @@ loop:
 					req_exts);
 				goto end;
 				}
-			if (!(i=X509_REQ_sign(req,pkey,digest)))
+			i=do_X509_REQ_sign(bio_err, req, pkey, digest, sigopts);
+			if (!i)
 				{
 				ERR_print_errors(bio_err);
 				goto end;
@@ -1083,7 +1094,9 @@ end:
 	if (genctx)
 		EVP_PKEY_CTX_free(genctx);
 	if (pkeyopts)
-		sk_STRING_free(pkeyopts);
+		sk_OPENSSL_STRING_free(pkeyopts);
+	if (sigopts)
+		sk_OPENSSL_STRING_free(sigopts);
 #ifndef OPENSSL_NO_ENGINE
 	if (gen_eng)
 		ENGINE_free(gen_eng);
@@ -1336,11 +1349,17 @@ start2:			for (;;)
 
 				BIO_snprintf(buf,sizeof buf,"%s_min",type);
 				if (!NCONF_get_number(req_conf,attr_sect,buf, &n_min))
+					{
+					ERR_clear_error();
 					n_min = -1;
+					}
 
 				BIO_snprintf(buf,sizeof buf,"%s_max",type);
 				if (!NCONF_get_number(req_conf,attr_sect,buf, &n_max))
+					{
+					ERR_clear_error();
 					n_max = -1;
+					}
 
 				if (!add_attribute_object(req,
 					v->value,def,value,nid,n_min,n_max, chtype))
@@ -1441,7 +1460,8 @@ start:
 		buf[0]='\0';
 		if (!batch)
 			{
-			fgets(buf,sizeof buf,stdin);
+			if (!fgets(buf,sizeof buf,stdin))
+				return 0;
 			}
 		else
 			{
@@ -1499,7 +1519,8 @@ start:
 		buf[0]='\0';
 		if (!batch)
 			{
-			fgets(buf,sizeof buf,stdin);
+			if (!fgets(buf,sizeof buf,stdin))
+				return 0;
 			}
 		else
 			{
@@ -1715,7 +1736,7 @@ static EVP_PKEY_CTX *set_keygen_ctx(BIO *err, const char *gstr, int *pkey_type,
 		ERR_print_errors(err);
 		return NULL;
 		}
-
+#ifndef OPENSSL_NO_RSA
 	if ((*pkey_type == EVP_PKEY_RSA) && (keylen != -1))
 		{
 		if (EVP_PKEY_CTX_set_rsa_keygen_bits(gctx, keylen) <= 0)
@@ -1726,6 +1747,7 @@ static EVP_PKEY_CTX *set_keygen_ctx(BIO *err, const char *gstr, int *pkey_type,
 			return NULL;
 			}
 		}
+#endif
 
 	return gctx;
 	}
@@ -1747,3 +1769,68 @@ static int genpkey_cb(EVP_PKEY_CTX *ctx)
 #endif
 	return 1;
 	}
+
+static int do_sign_init(BIO *err, EVP_MD_CTX *ctx, EVP_PKEY *pkey,
+			const EVP_MD *md, STACK_OF(OPENSSL_STRING) *sigopts)
+	{
+	EVP_PKEY_CTX *pkctx = NULL;
+	int i;
+	EVP_MD_CTX_init(ctx);
+	if (!EVP_DigestSignInit(ctx, &pkctx, md, NULL, pkey))
+		return 0;
+	for (i = 0; i < sk_OPENSSL_STRING_num(sigopts); i++)
+		{
+		char *sigopt = sk_OPENSSL_STRING_value(sigopts, i);
+		if (pkey_ctrl_string(pkctx, sigopt) <= 0)
+			{
+			BIO_printf(err, "parameter error \"%s\"\n", sigopt);
+			ERR_print_errors(bio_err);
+			return 0;
+			}
+		}
+	return 1;
+	}
+
+int do_X509_sign(BIO *err, X509 *x, EVP_PKEY *pkey, const EVP_MD *md,
+			STACK_OF(OPENSSL_STRING) *sigopts)
+	{
+	int rv;
+	EVP_MD_CTX mctx;
+	EVP_MD_CTX_init(&mctx);
+	rv = do_sign_init(err, &mctx, pkey, md, sigopts);
+	if (rv > 0)
+		rv = X509_sign_ctx(x, &mctx);
+	EVP_MD_CTX_cleanup(&mctx);
+	return rv > 0 ? 1 : 0;
+	}
+
+
+int do_X509_REQ_sign(BIO *err, X509_REQ *x, EVP_PKEY *pkey, const EVP_MD *md,
+			STACK_OF(OPENSSL_STRING) *sigopts)
+	{
+	int rv;
+	EVP_MD_CTX mctx;
+	EVP_MD_CTX_init(&mctx);
+	rv = do_sign_init(err, &mctx, pkey, md, sigopts);
+	if (rv > 0)
+		rv = X509_REQ_sign_ctx(x, &mctx);
+	EVP_MD_CTX_cleanup(&mctx);
+	return rv > 0 ? 1 : 0;
+	}
+		
+	
+
+int do_X509_CRL_sign(BIO *err, X509_CRL *x, EVP_PKEY *pkey, const EVP_MD *md,
+			STACK_OF(OPENSSL_STRING) *sigopts)
+	{
+	int rv;
+	EVP_MD_CTX mctx;
+	EVP_MD_CTX_init(&mctx);
+	rv = do_sign_init(err, &mctx, pkey, md, sigopts);
+	if (rv > 0)
+		rv = X509_CRL_sign_ctx(x, &mctx);
+	EVP_MD_CTX_cleanup(&mctx);
+	return rv > 0 ? 1 : 0;
+	}
+		
+	

apps/rsa.c

@@ -409,6 +409,7 @@ bad:
 			}
 		else i=PEM_write_bio_RSAPrivateKey(out,rsa,
 						enc,NULL,0,NULL,passout);
+#if !defined(OPENSSL_NO_DSA) && !defined(OPENSSL_NO_RC4)
 	} else if (outformat == FORMAT_MSBLOB || outformat == FORMAT_PVK) {
 		EVP_PKEY *pk;
 		pk = EVP_PKEY_new();
@@ -420,11 +421,12 @@ bad:
 		else
 			i = i2b_PrivateKey_bio(out, pk);
 		EVP_PKEY_free(pk);
+#endif
 	} else	{
 		BIO_printf(bio_err,"bad output format specified for outfile\n");
 		goto end;
 		}
-	if (!i)
+	if (i <= 0)
 		{
 		BIO_printf(bio_err,"unable to write key\n");
 		ERR_print_errors(bio_err);

apps/rsautl.c

@@ -342,4 +342,10 @@ static void usage()
 
 }
 
+#else /* !OPENSSL_NO_RSA */
+
+# if PEDANTIC
+static void *dummy=&dummy;
+# endif
+
 #endif

apps/s_apps.h

@@ -171,3 +171,6 @@ void MS_CALLBACK tlsext_cb(SSL *s, int client_server, int type,
 					unsigned char *data, int len,
 					void *arg);
 #endif
+
+int MS_CALLBACK generate_cookie_callback(SSL *ssl, unsigned char *cookie, unsigned int *cookie_len);
+int MS_CALLBACK verify_cookie_callback(SSL *ssl, unsigned char *cookie, unsigned int cookie_len);

apps/s_cb.c

@@ -117,17 +117,21 @@
 #undef NON_MAIN
 #undef USE_SOCKETS
 #include <openssl/err.h>
+#include <openssl/rand.h>
 #include <openssl/x509.h>
 #include <openssl/ssl.h>
 #include "s_apps.h"
 
+#define	COOKIE_SECRET_LENGTH	16
+
 int verify_depth=0;
 int verify_error=X509_V_OK;
 int verify_return_error=0;
+unsigned char cookie_secret[COOKIE_SECRET_LENGTH];
+int cookie_initialized=0;
 
 int MS_CALLBACK verify_callback(int ok, X509_STORE_CTX *ctx)
 	{
-	char buf[256];
 	X509 *err_cert;
 	int err,depth;
 
@@ -135,8 +139,15 @@ int MS_CALLBACK verify_callback(int ok, X509_STORE_CTX *ctx)
 	err=	X509_STORE_CTX_get_error(ctx);
 	depth=	X509_STORE_CTX_get_error_depth(ctx);
 
-	X509_NAME_oneline(X509_get_subject_name(err_cert),buf,sizeof buf);
-	BIO_printf(bio_err,"depth=%d %s\n",depth,buf);
+	BIO_printf(bio_err,"depth=%d ",depth);
+	if (err_cert)
+		{
+		X509_NAME_print_ex(bio_err, X509_get_subject_name(err_cert),
+					0, XN_FLAG_ONELINE);
+		BIO_puts(bio_err, "\n");
+		}
+	else
+		BIO_puts(bio_err, "<no cert>\n");
 	if (!ok)
 		{
 		BIO_printf(bio_err,"verify error:num=%d:%s\n",err,
@@ -153,25 +164,33 @@ int MS_CALLBACK verify_callback(int ok, X509_STORE_CTX *ctx)
 			verify_error=X509_V_ERR_CERT_CHAIN_TOO_LONG;
 			}
 		}
-	switch (ctx->error)
+	switch (err)
 		{
 	case X509_V_ERR_UNABLE_TO_GET_ISSUER_CERT:
-		X509_NAME_oneline(X509_get_issuer_name(ctx->current_cert),buf,sizeof buf);
-		BIO_printf(bio_err,"issuer= %s\n",buf);
+		BIO_puts(bio_err,"issuer= ");
+		X509_NAME_print_ex(bio_err, X509_get_issuer_name(err_cert),
+					0, XN_FLAG_ONELINE);
+		BIO_puts(bio_err, "\n");
 		break;
 	case X509_V_ERR_CERT_NOT_YET_VALID:
 	case X509_V_ERR_ERROR_IN_CERT_NOT_BEFORE_FIELD:
 		BIO_printf(bio_err,"notBefore=");
-		ASN1_TIME_print(bio_err,X509_get_notBefore(ctx->current_cert));
+		ASN1_TIME_print(bio_err,X509_get_notBefore(err_cert));
 		BIO_printf(bio_err,"\n");
 		break;
 	case X509_V_ERR_CERT_HAS_EXPIRED:
 	case X509_V_ERR_ERROR_IN_CERT_NOT_AFTER_FIELD:
 		BIO_printf(bio_err,"notAfter=");
-		ASN1_TIME_print(bio_err,X509_get_notAfter(ctx->current_cert));
+		ASN1_TIME_print(bio_err,X509_get_notAfter(err_cert));
 		BIO_printf(bio_err,"\n");
 		break;
+	case X509_V_ERR_NO_EXPLICIT_POLICY:
+		policies_print(bio_err, ctx);
+		break;
 		}
+	if (err == X509_V_OK && ok == 2)
+		policies_print(bio_err, ctx);
+
 	BIO_printf(bio_err,"verify return:%d\n",ok);
 	return(ok);
 	}
@@ -338,6 +357,18 @@ void MS_CALLBACK msg_cb(int write_p, int version, int content_type, const void *
 	case TLS1_VERSION:
 		str_version = "TLS 1.0 ";
 		break;
+	case TLS1_1_VERSION:
+		str_version = "TLS 1.1 ";
+		break;
+	case TLS1_2_VERSION:
+		str_version = "TLS 1.2 ";
+		break;
+	case DTLS1_VERSION:
+		str_version = "DTLS 1.0 ";
+		break;
+	case DTLS1_BAD_VER:
+		str_version = "DTLS 1.0 (bad) ";
+		break;
 	default:
 		str_version = "???";
 		}
@@ -403,7 +434,10 @@ void MS_CALLBACK msg_cb(int write_p, int version, int content_type, const void *
 			}
 		}
 
-	if (version == SSL3_VERSION || version == TLS1_VERSION)
+	if (version == SSL3_VERSION ||
+	    version == TLS1_VERSION ||
+	    version == DTLS1_VERSION ||
+	    version == DTLS1_BAD_VER)
 		{
 		switch (content_type)
 			{
@@ -521,6 +555,9 @@ void MS_CALLBACK msg_cb(int write_p, int version, int content_type, const void *
 				case 114:
 					str_details2 = " bad_certificate_hash_value";
 					break;
+				case 115:
+					str_details2 = " unknown_psk_identity";
+					break;
 					}
 				}
 			}
@@ -542,6 +579,9 @@ void MS_CALLBACK msg_cb(int write_p, int version, int content_type, const void *
 				case 2:
 					str_details1 = ", ServerHello";
 					break;
+				case 3:
+					str_details1 = ", HelloVerifyRequest";
+					break;
 				case 11:
 					str_details1 = ", Certificate";
 					break;
@@ -566,6 +606,26 @@ void MS_CALLBACK msg_cb(int write_p, int version, int content_type, const void *
 					}
 				}
 			}
+
+#ifndef OPENSSL_NO_HEARTBEATS
+		if (content_type == 24) /* Heartbeat */
+			{
+			str_details1 = ", Heartbeat";
+			
+			if (len > 0)
+				{
+				switch (((const unsigned char*)buf)[0])
+					{
+				case 1:
+					str_details1 = ", HeartbeatRequest";
+					break;
+				case 2:
+					str_details1 = ", HeartbeatResponse";
+					break;
+					}
+				}
+			}
+#endif
 		}
 
 	BIO_printf(bio, "%s %s%s [length %04lx]%s%s\n", str_write_p, str_version, str_content_type, (unsigned long)len, str_details1, str_details2);
@@ -626,6 +686,22 @@ void MS_CALLBACK tlsext_cb(SSL *s, int client_server, int type,
 		extname = "status request";
 		break;
 
+		case TLSEXT_TYPE_user_mapping:
+		extname = "user mapping";
+		break;
+
+		case TLSEXT_TYPE_client_authz:
+		extname = "client authz";
+		break;
+
+		case TLSEXT_TYPE_server_authz:
+		extname = "server authz";
+		break;
+
+		case TLSEXT_TYPE_cert_type:
+		extname = "cert type";
+		break;
+
 		case TLSEXT_TYPE_elliptic_curves:
 		extname = "elliptic curves";
 		break;
@@ -634,8 +710,28 @@ void MS_CALLBACK tlsext_cb(SSL *s, int client_server, int type,
 		extname = "EC point formats";
 		break;
 
+		case TLSEXT_TYPE_srp:
+		extname = "SRP";
+		break;
+
+		case TLSEXT_TYPE_signature_algorithms:
+		extname = "signature algorithms";
+		break;
+
+		case TLSEXT_TYPE_use_srtp:
+		extname = "use SRTP";
+		break;
+
+		case TLSEXT_TYPE_heartbeat:
+		extname = "heartbeat";
+		break;
+
 		case TLSEXT_TYPE_session_ticket:
-		extname = "server ticket";
+		extname = "session ticket";
+		break;
+
+		case TLSEXT_TYPE_renegotiate: 
+		extname = "renegotiation info";
 		break;
 
 #ifdef TLSEXT_TYPE_opaque_prf_input
@@ -643,6 +739,11 @@ void MS_CALLBACK tlsext_cb(SSL *s, int client_server, int type,
 		extname = "opaque PRF input";
 		break;
 #endif
+#ifdef TLSEXT_TYPE_next_proto_neg
+		case TLSEXT_TYPE_next_proto_neg:
+		extname = "next protocol";
+		break;
+#endif
 
 		default:
 		extname = "unknown";
@@ -656,3 +757,172 @@ void MS_CALLBACK tlsext_cb(SSL *s, int client_server, int type,
 	BIO_dump(bio, (char *)data, len);
 	(void)BIO_flush(bio);
 	}
+
+int MS_CALLBACK generate_cookie_callback(SSL *ssl, unsigned char *cookie, unsigned int *cookie_len)
+	{
+	unsigned char *buffer, result[EVP_MAX_MD_SIZE];
+	unsigned int length, resultlength;
+	union {
+		struct sockaddr sa;
+		struct sockaddr_in s4;
+#if OPENSSL_USE_IPV6
+		struct sockaddr_in6 s6;
+#endif
+	} peer;
+
+	/* Initialize a random secret */
+	if (!cookie_initialized)
+		{
+		if (!RAND_bytes(cookie_secret, COOKIE_SECRET_LENGTH))
+			{
+			BIO_printf(bio_err,"error setting random cookie secret\n");
+			return 0;
+			}
+		cookie_initialized = 1;
+		}
+
+	/* Read peer information */
+	(void)BIO_dgram_get_peer(SSL_get_rbio(ssl), &peer);
+
+	/* Create buffer with peer's address and port */
+	length = 0;
+	switch (peer.sa.sa_family)
+		{
+	case AF_INET:
+		length += sizeof(struct in_addr);
+		length += sizeof(peer.s4.sin_port);
+		break;
+#if OPENSSL_USE_IPV6
+	case AF_INET6:
+		length += sizeof(struct in6_addr);
+		length += sizeof(peer.s6.sin6_port);
+		break;
+#endif
+	default:
+		OPENSSL_assert(0);
+		break;
+		}
+	buffer = OPENSSL_malloc(length);
+
+	if (buffer == NULL)
+		{
+		BIO_printf(bio_err,"out of memory\n");
+		return 0;
+		}
+
+	switch (peer.sa.sa_family)
+		{
+	case AF_INET:
+		memcpy(buffer,
+		       &peer.s4.sin_port,
+		       sizeof(peer.s4.sin_port));
+		memcpy(buffer + sizeof(peer.s4.sin_port),
+		       &peer.s4.sin_addr,
+		       sizeof(struct in_addr));
+		break;
+#if OPENSSL_USE_IPV6
+	case AF_INET6:
+		memcpy(buffer,
+		       &peer.s6.sin6_port,
+		       sizeof(peer.s6.sin6_port));
+		memcpy(buffer + sizeof(peer.s6.sin6_port),
+		       &peer.s6.sin6_addr,
+		       sizeof(struct in6_addr));
+		break;
+#endif
+	default:
+		OPENSSL_assert(0);
+		break;
+		}
+
+	/* Calculate HMAC of buffer using the secret */
+	HMAC(EVP_sha1(), cookie_secret, COOKIE_SECRET_LENGTH,
+	     buffer, length, result, &resultlength);
+	OPENSSL_free(buffer);
+
+	memcpy(cookie, result, resultlength);
+	*cookie_len = resultlength;
+
+	return 1;
+	}
+
+int MS_CALLBACK verify_cookie_callback(SSL *ssl, unsigned char *cookie, unsigned int cookie_len)
+	{
+	unsigned char *buffer, result[EVP_MAX_MD_SIZE];
+	unsigned int length, resultlength;
+	union {
+		struct sockaddr sa;
+		struct sockaddr_in s4;
+#if OPENSSL_USE_IPV6
+		struct sockaddr_in6 s6;
+#endif
+	} peer;
+
+	/* If secret isn't initialized yet, the cookie can't be valid */
+	if (!cookie_initialized)
+		return 0;
+
+	/* Read peer information */
+	(void)BIO_dgram_get_peer(SSL_get_rbio(ssl), &peer);
+
+	/* Create buffer with peer's address and port */
+	length = 0;
+	switch (peer.sa.sa_family)
+		{
+	case AF_INET:
+		length += sizeof(struct in_addr);
+		length += sizeof(peer.s4.sin_port);
+		break;
+#if OPENSSL_USE_IPV6
+	case AF_INET6:
+		length += sizeof(struct in6_addr);
+		length += sizeof(peer.s6.sin6_port);
+		break;
+#endif
+	default:
+		OPENSSL_assert(0);
+		break;
+		}
+	buffer = OPENSSL_malloc(length);
+	
+	if (buffer == NULL)
+		{
+		BIO_printf(bio_err,"out of memory\n");
+		return 0;
+		}
+
+	switch (peer.sa.sa_family)
+		{
+	case AF_INET:
+		memcpy(buffer,
+		       &peer.s4.sin_port,
+		       sizeof(peer.s4.sin_port));
+		memcpy(buffer + sizeof(peer.s4.sin_port),
+		       &peer.s4.sin_addr,
+		       sizeof(struct in_addr));
+		break;
+#if OPENSSL_USE_IPV6
+	case AF_INET6:
+		memcpy(buffer,
+		       &peer.s6.sin6_port,
+		       sizeof(peer.s6.sin6_port));
+		memcpy(buffer + sizeof(peer.s6.sin6_port),
+		       &peer.s6.sin6_addr,
+		       sizeof(struct in6_addr));
+		break;
+#endif
+	default:
+		OPENSSL_assert(0);
+		break;
+		}
+
+	/* Calculate HMAC of buffer using the secret */
+	HMAC(EVP_sha1(), cookie_secret, COOKIE_SECRET_LENGTH,
+	     buffer, length, result, &resultlength);
+	OPENSSL_free(buffer);
+
+	if (cookie_len == resultlength && memcmp(result, cookie, resultlength) == 0)
+		return 1;
+
+	return 0;
+	}

apps/s_client.c

@@ -163,6 +163,9 @@ typedef unsigned int u_int;
 #include <openssl/rand.h>
 #include <openssl/ocsp.h>
 #include <openssl/bn.h>
+#ifndef OPENSSL_NO_SRP
+#include <openssl/srp.h>
+#endif
 #include "s_apps.h"
 #include "timeouts.h"
 
@@ -203,6 +206,9 @@ static int c_status_req=0;
 static int c_msg=0;
 static int c_showcerts=0;
 
+static char *keymatexportlabel=NULL;
+static int keymatexportlen=20;
+
 static void sc_usage(void);
 static void print_stuff(BIO *berr,SSL *con,int full);
 #ifndef OPENSSL_NO_TLSEXT
@@ -315,13 +321,22 @@ static void sc_usage(void)
 # ifndef OPENSSL_NO_JPAKE
 	BIO_printf(bio_err," -jpake arg    - JPAKE secret to use\n");
 # endif
+#endif
+#ifndef OPENSSL_NO_SRP
+	BIO_printf(bio_err," -srpuser user     - SRP authentification for 'user'\n");
+	BIO_printf(bio_err," -srppass arg      - password for 'user'\n");
+	BIO_printf(bio_err," -srp_lateuser     - SRP username into second ClientHello message\n");
+	BIO_printf(bio_err," -srp_moregroups   - Tolerate other than the known g N values.\n");
+	BIO_printf(bio_err," -srp_strength int - minimal mength in bits for N (default %d).\n",SRP_MINIMAL_N);
 #endif
 	BIO_printf(bio_err," -ssl2         - just use SSLv2\n");
 	BIO_printf(bio_err," -ssl3         - just use SSLv3\n");
+	BIO_printf(bio_err," -tls1_2       - just use TLSv1.2\n");
+	BIO_printf(bio_err," -tls1_1       - just use TLSv1.1\n");
 	BIO_printf(bio_err," -tls1         - just use TLSv1\n");
 	BIO_printf(bio_err," -dtls1        - just use DTLSv1\n");    
-	BIO_printf(bio_err," -mtu          - set the MTU\n");
-	BIO_printf(bio_err," -no_tls1/-no_ssl3/-no_ssl2 - turn off that protocol\n");
+	BIO_printf(bio_err," -mtu          - set the link layer MTU\n");
+	BIO_printf(bio_err," -no_tls1_2/-no_tls1_1/-no_tls1/-no_ssl3/-no_ssl2 - turn off that protocol\n");
 	BIO_printf(bio_err," -bugs         - Switch on all SSL implementation bug workarounds\n");
 	BIO_printf(bio_err," -serverpref   - Use server's cipher preferences (only SSLv2)\n");
 	BIO_printf(bio_err," -cipher       - preferred cipher to use, use the 'openssl ciphers'\n");
@@ -342,7 +357,14 @@ static void sc_usage(void)
 	BIO_printf(bio_err," -tlsextdebug      - hex dump of all TLS extensions received\n");
 	BIO_printf(bio_err," -status           - request certificate status from server\n");
 	BIO_printf(bio_err," -no_ticket        - disable use of RFC4507bis session tickets\n");
+# if !defined(OPENSSL_NO_NEXTPROTONEG)
+	BIO_printf(bio_err," -nextprotoneg arg - enable NPN extension, considering named protocols supported (comma-separated list)\n");
+# endif
 #endif
+	BIO_printf(bio_err," -legacy_renegotiation - enable use of legacy renegotiation (dangerous)\n");
+	BIO_printf(bio_err," -use_srtp profiles - Offer SRTP key management with a colon-separated profile list\n");
+ 	BIO_printf(bio_err," -keymatexport label   - Export keying material using label\n");
+ 	BIO_printf(bio_err," -keymatexportlen len  - Export len bytes of keying material (default 20)\n");
 	}
 
 #ifndef OPENSSL_NO_TLSEXT
@@ -365,6 +387,156 @@ static int MS_CALLBACK ssl_servername_cb(SSL *s, int *ad, void *arg)
 	
 	return SSL_TLSEXT_ERR_OK;
 	}
+
+#ifndef OPENSSL_NO_SRP
+
+/* This is a context that we pass to all callbacks */
+typedef struct srp_arg_st
+	{
+	char *srppassin;
+	char *srplogin;
+	int msg;   /* copy from c_msg */
+	int debug; /* copy from c_debug */
+	int amp;   /* allow more groups */
+	int strength /* minimal size for N */ ;
+	} SRP_ARG;
+
+#define SRP_NUMBER_ITERATIONS_FOR_PRIME 64
+
+static int srp_Verify_N_and_g(BIGNUM *N, BIGNUM *g)
+	{
+	BN_CTX *bn_ctx = BN_CTX_new();
+	BIGNUM *p = BN_new();
+	BIGNUM *r = BN_new();
+	int ret =
+		g != NULL && N != NULL && bn_ctx != NULL && BN_is_odd(N) &&
+		BN_is_prime_ex(N, SRP_NUMBER_ITERATIONS_FOR_PRIME, bn_ctx, NULL) &&
+		p != NULL && BN_rshift1(p, N) &&
+
+		/* p = (N-1)/2 */
+		BN_is_prime_ex(p, SRP_NUMBER_ITERATIONS_FOR_PRIME, bn_ctx, NULL) &&
+		r != NULL &&
+
+		/* verify g^((N-1)/2) == -1 (mod N) */
+		BN_mod_exp(r, g, p, N, bn_ctx) &&
+		BN_add_word(r, 1) &&
+		BN_cmp(r, N) == 0;
+
+	if(r)
+		BN_free(r);
+	if(p)
+		BN_free(p);
+	if(bn_ctx)
+		BN_CTX_free(bn_ctx);
+	return ret;
+	}
+
+/* This callback is used here for two purposes:
+   - extended debugging
+   - making some primality tests for unknown groups
+   The callback is only called for a non default group.
+
+   An application does not need the call back at all if
+   only the stanard groups are used.  In real life situations, 
+   client and server already share well known groups, 
+   thus there is no need to verify them. 
+   Furthermore, in case that a server actually proposes a group that
+   is not one of those defined in RFC 5054, it is more appropriate 
+   to add the group to a static list and then compare since 
+   primality tests are rather cpu consuming.
+*/
+
+static int MS_CALLBACK ssl_srp_verify_param_cb(SSL *s, void *arg)
+	{
+	SRP_ARG *srp_arg = (SRP_ARG *)arg;
+	BIGNUM *N = NULL, *g = NULL;
+	if (!(N = SSL_get_srp_N(s)) || !(g = SSL_get_srp_g(s)))
+		return 0;
+	if (srp_arg->debug || srp_arg->msg || srp_arg->amp == 1)
+		{
+    		BIO_printf(bio_err, "SRP parameters:\n"); 
+		BIO_printf(bio_err,"\tN="); BN_print(bio_err,N);
+		BIO_printf(bio_err,"\n\tg="); BN_print(bio_err,g);
+		BIO_printf(bio_err,"\n");
+		}
+
+	if (SRP_check_known_gN_param(g,N))
+		return 1;
+
+	if (srp_arg->amp == 1)
+		{
+		if (srp_arg->debug)
+			BIO_printf(bio_err, "SRP param N and g are not known params, going to check deeper.\n");
+
+/* The srp_moregroups is a real debugging feature.
+   Implementors should rather add the value to the known ones.
+   The minimal size has already been tested.
+*/
+		if (BN_num_bits(g) <= BN_BITS && srp_Verify_N_and_g(N,g))
+			return 1;
+		}	
+	BIO_printf(bio_err, "SRP param N and g rejected.\n");
+	return 0;
+	}
+
+#define PWD_STRLEN 1024
+
+static char * MS_CALLBACK ssl_give_srp_client_pwd_cb(SSL *s, void *arg)
+	{
+	SRP_ARG *srp_arg = (SRP_ARG *)arg;
+	char *pass = (char *)OPENSSL_malloc(PWD_STRLEN+1);
+	PW_CB_DATA cb_tmp;
+	int l;
+
+	cb_tmp.password = (char *)srp_arg->srppassin;
+	cb_tmp.prompt_info = "SRP user";
+	if ((l = password_callback(pass, PWD_STRLEN, 0, &cb_tmp))<0)
+		{
+		BIO_printf (bio_err, "Can't read Password\n");
+		OPENSSL_free(pass);
+		return NULL;
+		}
+	*(pass+l)= '\0';
+
+	return pass;
+	}
+
+#endif
+	char *srtp_profiles = NULL;
+
+# ifndef OPENSSL_NO_NEXTPROTONEG
+/* This the context that we pass to next_proto_cb */
+typedef struct tlsextnextprotoctx_st {
+	unsigned char *data;
+	unsigned short len;
+	int status;
+} tlsextnextprotoctx;
+
+static tlsextnextprotoctx next_proto;
+
+static int next_proto_cb(SSL *s, unsigned char **out, unsigned char *outlen, const unsigned char *in, unsigned int inlen, void *arg)
+	{
+	tlsextnextprotoctx *ctx = arg;
+
+	if (!c_quiet)
+		{
+		/* We can assume that |in| is syntactically valid. */
+		unsigned i;
+		BIO_printf(bio_c_out, "Protocols advertised by server: ");
+		for (i = 0; i < inlen; )
+			{
+			if (i)
+				BIO_write(bio_c_out, ", ", 2);
+			BIO_write(bio_c_out, &in[i + 1], in[i]);
+			i += in[i] + 1;
+			}
+		BIO_write(bio_c_out, "\n", 1);
+		}
+
+	ctx->status = SSL_select_next_proto(out, outlen, in, inlen, ctx->data, ctx->len);
+	return SSL_TLSEXT_ERR_OK;
+	}
+# endif
 #endif
 
 enum
@@ -381,9 +553,11 @@ int MAIN(int, char **);
 
 int MAIN(int argc, char **argv)
 	{
-	int off=0;
+	unsigned int off=0, clr=0;
 	SSL *con=NULL;
-	X509_STORE *store = NULL;
+#ifndef OPENSSL_NO_KRB5
+	KSSL_CTX *kctx;
+#endif
 	int s,k,width,state=0;
 	char *cbuf=NULL,*sbuf=NULL,*mbuf=NULL;
 	int cbuf_len,cbuf_off;
@@ -404,12 +578,15 @@ int MAIN(int argc, char **argv)
 	SSL_CTX *ctx=NULL;
 	int ret=1,in_init=1,i,nbio_test=0;
 	int starttls_proto = PROTO_OFF;
-	int prexit = 0, vflags = 0;
+	int prexit = 0;
+	X509_VERIFY_PARAM *vpm = NULL;
+	int badarg = 0;
 	const SSL_METHOD *meth=NULL;
 	int socket_type=SOCK_STREAM;
 	BIO *sbio;
 	char *inrand=NULL;
 	int mbuf_len=0;
+	struct timeval timeout, *timeoutp;
 #ifndef OPENSSL_NO_ENGINE
 	char *engine_id=NULL;
 	char *ssl_client_engine_id=NULL;
@@ -426,6 +603,9 @@ int MAIN(int argc, char **argv)
 	char *servername = NULL; 
         tlsextctx tlsextcbp = 
         {NULL,0};
+# ifndef OPENSSL_NO_NEXTPROTONEG
+	const char *next_proto_neg_in = NULL;
+# endif
 #endif
 	char *sess_in = NULL;
 	char *sess_out = NULL;
@@ -436,15 +616,14 @@ int MAIN(int argc, char **argv)
 #ifndef OPENSSL_NO_JPAKE
 	char *jpake_secret = NULL;
 #endif
-
-#if !defined(OPENSSL_NO_SSL2) && !defined(OPENSSL_NO_SSL3)
-	meth=SSLv23_client_method();
-#elif !defined(OPENSSL_NO_SSL3)
-	meth=SSLv3_client_method();
-#elif !defined(OPENSSL_NO_SSL2)
-	meth=SSLv2_client_method();
+#ifndef OPENSSL_NO_SRP
+	char * srppass = NULL;
+	int srp_lateuser = 0;
+	SRP_ARG srp_arg = {NULL,NULL,0,0,0,1024};
 #endif
 
+	meth=SSLv23_client_method();
+
 	apps_startup();
 	c_Pause=0;
 	c_quiet=0;
@@ -521,10 +700,12 @@ int MAIN(int argc, char **argv)
 			if (--argc < 1) goto bad;
 			cert_format = str2fmt(*(++argv));
 			}
-		else if	(strcmp(*argv,"-crl_check") == 0)
-			vflags |= X509_V_FLAG_CRL_CHECK;
-		else if	(strcmp(*argv,"-crl_check_all") == 0)
-			vflags |= X509_V_FLAG_CRL_CHECK|X509_V_FLAG_CRL_CHECK_ALL;
+		else if (args_verify(&argv, &argc, &badarg, bio_err, &vpm))
+			{
+			if (badarg)
+				goto bad;
+			continue;
+			}
 		else if (strcmp(*argv,"-verify_return_error") == 0)
 			verify_return_error = 1;
 		else if	(strcmp(*argv,"-prexit") == 0)
@@ -576,13 +757,44 @@ int MAIN(int argc, char **argv)
 			psk_key=*(++argv);
 			for (j = 0; j < strlen(psk_key); j++)
                                 {
-                                if (isxdigit((int)psk_key[j]))
+                                if (isxdigit((unsigned char)psk_key[j]))
                                         continue;
                                 BIO_printf(bio_err,"Not a hex number '%s'\n",*argv);
                                 goto bad;
                                 }
 			}
 #endif
+#ifndef OPENSSL_NO_SRP
+		else if (strcmp(*argv,"-srpuser") == 0)
+			{
+			if (--argc < 1) goto bad;
+			srp_arg.srplogin= *(++argv);
+			meth=TLSv1_client_method();
+			}
+		else if (strcmp(*argv,"-srppass") == 0)
+			{
+			if (--argc < 1) goto bad;
+			srppass= *(++argv);
+			meth=TLSv1_client_method();
+			}
+		else if (strcmp(*argv,"-srp_strength") == 0)
+			{
+			if (--argc < 1) goto bad;
+			srp_arg.strength=atoi(*(++argv));
+			BIO_printf(bio_err,"SRP minimal length for N is %d\n",srp_arg.strength);
+			meth=TLSv1_client_method();
+			}
+		else if (strcmp(*argv,"-srp_lateuser") == 0)
+			{
+			srp_lateuser= 1;
+			meth=TLSv1_client_method();
+			}
+		else if	(strcmp(*argv,"-srp_moregroups") == 0)
+			{
+			srp_arg.amp=1;
+			meth=TLSv1_client_method();
+			}
+#endif
 #ifndef OPENSSL_NO_SSL2
 		else if	(strcmp(*argv,"-ssl2") == 0)
 			meth=SSLv2_client_method();
@@ -592,6 +804,10 @@ int MAIN(int argc, char **argv)
 			meth=SSLv3_client_method();
 #endif
 #ifndef OPENSSL_NO_TLS1
+		else if	(strcmp(*argv,"-tls1_2") == 0)
+			meth=TLSv1_2_client_method();
+		else if	(strcmp(*argv,"-tls1_1") == 0)
+			meth=TLSv1_1_client_method();
 		else if	(strcmp(*argv,"-tls1") == 0)
 			meth=TLSv1_client_method();
 #endif
@@ -640,6 +856,10 @@ int MAIN(int argc, char **argv)
 			if (--argc < 1) goto bad;
 			CAfile= *(++argv);
 			}
+		else if (strcmp(*argv,"-no_tls1_2") == 0)
+			off|=SSL_OP_NO_TLSv1_2;
+		else if (strcmp(*argv,"-no_tls1_1") == 0)
+			off|=SSL_OP_NO_TLSv1_1;
 		else if (strcmp(*argv,"-no_tls1") == 0)
 			off|=SSL_OP_NO_TLSv1;
 		else if (strcmp(*argv,"-no_ssl3") == 0)
@@ -651,9 +871,22 @@ int MAIN(int argc, char **argv)
 #ifndef OPENSSL_NO_TLSEXT
 		else if	(strcmp(*argv,"-no_ticket") == 0)
 			{ off|=SSL_OP_NO_TICKET; }
+# ifndef OPENSSL_NO_NEXTPROTONEG
+		else if (strcmp(*argv,"-nextprotoneg") == 0)
+			{
+			if (--argc < 1) goto bad;
+			next_proto_neg_in = *(++argv);
+			}
+# endif
 #endif
 		else if (strcmp(*argv,"-serverpref") == 0)
 			off|=SSL_OP_CIPHER_SERVER_PREFERENCE;
+		else if (strcmp(*argv,"-legacy_renegotiation") == 0)
+			off|=SSL_OP_ALLOW_UNSAFE_LEGACY_RENEGOTIATION;
+		else if	(strcmp(*argv,"-legacy_server_connect") == 0)
+			{ off|=SSL_OP_LEGACY_SERVER_CONNECT; }
+		else if	(strcmp(*argv,"-no_legacy_server_connect") == 0)
+			{ clr|=SSL_OP_LEGACY_SERVER_CONNECT; }
 		else if	(strcmp(*argv,"-cipher") == 0)
 			{
 			if (--argc < 1) goto bad;
@@ -712,7 +945,23 @@ int MAIN(int argc, char **argv)
 			jpake_secret = *++argv;
 			}
 #endif
-		else
+		else if (strcmp(*argv,"-use_srtp") == 0)
+			{
+			if (--argc < 1) goto bad;
+			srtp_profiles = *(++argv);
+			}
+		else if (strcmp(*argv,"-keymatexport") == 0)
+			{
+			if (--argc < 1) goto bad;
+			keymatexportlabel= *(++argv);
+			}
+		else if (strcmp(*argv,"-keymatexportlen") == 0)
+			{
+			if (--argc < 1) goto bad;
+			keymatexportlen=atoi(*(++argv));
+			if (keymatexportlen == 0) goto bad;
+			}
+                else
 			{
 			BIO_printf(bio_err,"unknown option %s\n",*argv);
 			badop=1;
@@ -738,19 +987,33 @@ bad:
 			goto end;
 			}
 		psk_identity = "JPAKE";
+		if (cipher)
+			{
+			BIO_printf(bio_err, "JPAKE sets cipher to PSK\n");
+			goto end;
+			}
+		cipher = "PSK";
 		}
-
-	if (cipher)
-		{
-		BIO_printf(bio_err, "JPAKE sets cipher to PSK\n");
-		goto end;
-		}
-	cipher = "PSK";
 #endif
 
 	OpenSSL_add_ssl_algorithms();
 	SSL_load_error_strings();
 
+#if !defined(OPENSSL_NO_TLSEXT) && !defined(OPENSSL_NO_NEXTPROTONEG)
+	next_proto.status = -1;
+	if (next_proto_neg_in)
+		{
+		next_proto.data = next_protos_parse(&next_proto.len, next_proto_neg_in);
+		if (next_proto.data == NULL)
+			{
+			BIO_printf(bio_err, "Error parsing -nextprotoneg argument\n");
+			goto end;
+			}
+		}
+	else
+		next_proto.data = NULL;
+#endif
+
 #ifndef OPENSSL_NO_ENGINE
         e = setup_engine(bio_err, engine_id, 1);
 	if (ssl_client_engine_id)
@@ -824,6 +1087,14 @@ bad:
 			}
 		}
 
+#ifndef OPENSSL_NO_SRP
+	if(!app_passwd(bio_err, srppass, NULL, &srp_arg.srppassin, NULL))
+		{
+		BIO_printf(bio_err, "Error getting password\n");
+		goto end;
+		}
+#endif
+
 	ctx=SSL_CTX_new(meth);
 	if (ctx == NULL)
 		{
@@ -831,6 +1102,9 @@ bad:
 		goto end;
 		}
 
+	if (vpm)
+		SSL_CTX_set1_param(ctx, vpm);
+
 #ifndef OPENSSL_NO_ENGINE
 	if (ssl_client_engine)
 		{
@@ -856,16 +1130,26 @@ bad:
 			BIO_printf(bio_c_out, "PSK key given or JPAKE in use, setting client callback\n");
 		SSL_CTX_set_psk_client_callback(ctx, psk_client_cb);
 		}
+	if (srtp_profiles != NULL)
+		SSL_CTX_set_tlsext_use_srtp(ctx, srtp_profiles);
 #endif
 	if (bugs)
 		SSL_CTX_set_options(ctx,SSL_OP_ALL|off);
 	else
 		SSL_CTX_set_options(ctx,off);
+
+	if (clr)
+		SSL_CTX_clear_options(ctx, clr);
 	/* DTLS: partial reads end up discarding unread UDP bytes :-( 
 	 * Setting read ahead solves this problem.
 	 */
 	if (socket_type == SOCK_DGRAM) SSL_CTX_set_read_ahead(ctx, 1);
 
+#if !defined(OPENSSL_NO_TLSEXT) && !defined(OPENSSL_NO_NEXTPROTONEG)
+	if (next_proto.data)
+		SSL_CTX_set_next_proto_select_cb(ctx, next_proto_cb, &next_proto);
+#endif
+
 	if (state) SSL_CTX_set_info_callback(ctx,apps_ssl_info_callback);
 	if (cipher != NULL)
 		if(!SSL_CTX_set_cipher_list(ctx,cipher)) {
@@ -890,8 +1174,6 @@ bad:
 		/* goto end; */
 		}
 
-	store = SSL_CTX_get_cert_store(ctx);
-	X509_STORE_set_flags(store, vflags);
 #ifndef OPENSSL_NO_TLSEXT
 	if (servername != NULL)
 		{
@@ -899,6 +1181,24 @@ bad:
 		SSL_CTX_set_tlsext_servername_callback(ctx, ssl_servername_cb);
 		SSL_CTX_set_tlsext_servername_arg(ctx, &tlsextcbp);
 		}
+#ifndef OPENSSL_NO_SRP
+        if (srp_arg.srplogin)
+		{
+		if (!srp_lateuser && !SSL_CTX_set_srp_username(ctx, srp_arg.srplogin))
+			{
+			BIO_printf(bio_err,"Unable to set SRP username\n");
+			goto end;
+			}
+		srp_arg.msg = c_msg;
+		srp_arg.debug = c_debug ;
+		SSL_CTX_set_srp_cb_arg(ctx,&srp_arg);
+		SSL_CTX_set_srp_client_pwd_callback(ctx, ssl_give_srp_client_pwd_cb);
+		SSL_CTX_set_srp_strength(ctx, srp_arg.strength);
+		if (c_msg || c_debug || srp_arg.amp == 0)
+			SSL_CTX_set_srp_verify_param_callback(ctx, ssl_srp_verify_param_cb);
+		}
+
+#endif
 #endif
 
 	con=SSL_new(ctx);
@@ -937,9 +1237,10 @@ bad:
 		}
 #endif
 #ifndef OPENSSL_NO_KRB5
-	if (con  &&  (con->kssl_ctx = kssl_ctx_new()) != NULL)
+	if (con  &&  (kctx = kssl_ctx_new()) != NULL)
                 {
-                kssl_ctx_setstring(con->kssl_ctx, KSSL_SERVER, host);
+		SSL_set0_kssl_ctx(con, kctx);
+                kssl_ctx_setstring(kctx, KSSL_SERVER, host);
 		}
 #endif	/* OPENSSL_NO_KRB5  */
 /*	SSL_set_cipher_list(con,"RC4-MD5"); */
@@ -971,11 +1272,10 @@ re_start:
 			}
 		}
 #endif                                              
-	if (c_Pause & 0x01) con->debug=1;
+	if (c_Pause & 0x01) SSL_set_debug(con, 1);
 
 	if ( SSL_version(con) == DTLS1_VERSION)
 		{
-		struct timeval timeout;
 
 		sbio=BIO_new_dgram(s,BIO_NOCLOSE);
 		if (getsockname(s, &peer, (void *)&peerlen) < 0)
@@ -999,10 +1299,10 @@ re_start:
 			BIO_ctrl(sbio, BIO_CTRL_DGRAM_SET_SEND_TIMEOUT, 0, &timeout);
 			}
 
-		if (socket_mtu > 0)
+		if (socket_mtu > 28)
 			{
 			SSL_set_options(con, SSL_OP_NO_QUERY_MTU);
-			SSL_set_mtu(con, socket_mtu);
+			SSL_set_mtu(con, socket_mtu - 28);
 			}
 		else
 			/* want to do MTU discovery */
@@ -1021,7 +1321,7 @@ re_start:
 
 	if (c_debug)
 		{
-		con->debug=1;
+		SSL_set_debug(con, 1);
 		BIO_set_callback(sbio,bio_dump_callback);
 		BIO_set_callback_arg(sbio,(char *)bio_c_out);
 		}
@@ -1192,6 +1492,12 @@ SSL_set_tlsext_status_ids(con, ids);
 		FD_ZERO(&readfds);
 		FD_ZERO(&writefds);
 
+		if ((SSL_version(con) == DTLS1_VERSION) &&
+			DTLSv1_get_timeout(con, &timeout))
+			timeoutp = &timeout;
+		else
+			timeoutp = NULL;
+
 		if (SSL_in_init(con) && !SSL_total_renegotiations(con))
 			{
 			in_init=1;
@@ -1296,7 +1602,7 @@ SSL_set_tlsext_status_ids(con, ids);
 					if(!i && (!((_kbhit()) || (WAIT_OBJECT_0 == WaitForSingleObject(GetStdHandle(STD_INPUT_HANDLE), 0))) || !read_tty) ) continue;
 #endif
 				} else 	i=select(width,(void *)&readfds,(void *)&writefds,
-					 NULL,NULL);
+					 NULL,timeoutp);
 			}
 #elif defined(OPENSSL_SYS_NETWARE)
 			if(!write_tty) {
@@ -1306,7 +1612,7 @@ SSL_set_tlsext_status_ids(con, ids);
 					i=select(width,(void *)&readfds,(void *)&writefds,
 						NULL,&tv);
 				} else 	i=select(width,(void *)&readfds,(void *)&writefds,
-					NULL,NULL);
+					NULL,timeoutp);
 			}
 #elif defined(OPENSSL_SYS_BEOS_R5)
 			/* Under BeOS-R5 the situation is similar to DOS */
@@ -1324,12 +1630,12 @@ SSL_set_tlsext_status_ids(con, ids);
 					if (!i && (stdin_set != 1 || !read_tty))
 						continue;
 				} else 	i=select(width,(void *)&readfds,(void *)&writefds,
-					 NULL,NULL);
+					 NULL,timeoutp);
 			}
 			(void)fcntl(fileno(stdin), F_SETFL, 0);
 #else
 			i=select(width,(void *)&readfds,(void *)&writefds,
-				 NULL,NULL);
+				 NULL,timeoutp);
 #endif
 			if ( i < 0)
 				{
@@ -1340,6 +1646,11 @@ SSL_set_tlsext_status_ids(con, ids);
 				}
 			}
 
+		if ((SSL_version(con) == DTLS1_VERSION) && DTLSv1_handle_timeout(con) > 0)
+			{
+			BIO_printf(bio_err,"TIMEOUT occured\n");
+			}
+
 		if (!ssl_pending && FD_ISSET(SSL_get_fd(con),&writefds))
 			{
 			k=SSL_write(con,&(cbuf[cbuf_off]),
@@ -1544,6 +1855,14 @@ printf("read=%d pending=%d peek=%d\n",k,SSL_pending(con),SSL_peek(con,zbuf,10240
 				SSL_renegotiate(con);
 				cbuf_len=0;
 				}
+#ifndef OPENSSL_NO_HEARTBEATS
+			else if ((!c_ign_eof) && (cbuf[0] == 'B'))
+ 				{
+				BIO_printf(bio_err,"HEARTBEATING\n");
+				SSL_heartbeat(con);
+				cbuf_len=0;
+				}
+#endif
 			else
 				{
 				cbuf_len=i;
@@ -1605,6 +1924,7 @@ static void print_stuff(BIO *bio, SSL *s, int full)
 #ifndef OPENSSL_NO_COMP
 	const COMP_METHOD *comp, *expansion;
 #endif
+	unsigned char *exportedkeymat;
 
 	if (full)
 		{
@@ -1695,7 +2015,7 @@ static void print_stuff(BIO *bio, SSL *s, int full)
 			BIO_number_read(SSL_get_rbio(s)),
 			BIO_number_written(SSL_get_wbio(s)));
 		}
-	BIO_printf(bio,((s->hit)?"---\nReused, ":"---\nNew, "));
+	BIO_printf(bio,(SSL_cache_hit(s)?"---\nReused, ":"---\nNew, "));
 	c=SSL_get_current_cipher(s);
 	BIO_printf(bio,"%s, Cipher is %s\n",
 		SSL_CIPHER_get_version(c),
@@ -1707,6 +2027,8 @@ static void print_stuff(BIO *bio, SSL *s, int full)
 							 EVP_PKEY_bits(pktmp));
 		EVP_PKEY_free(pktmp);
 	}
+	BIO_printf(bio, "Secure Renegotiation IS%s supported\n",
+			SSL_get_secure_renegotiation_support(s) ? "" : " NOT");
 #ifndef OPENSSL_NO_COMP
 	comp=SSL_get_current_compression(s);
 	expansion=SSL_get_current_expansion(s);
@@ -1715,7 +2037,66 @@ static void print_stuff(BIO *bio, SSL *s, int full)
 	BIO_printf(bio,"Expansion: %s\n",
 		expansion ? SSL_COMP_get_name(expansion) : "NONE");
 #endif
+ 
+#ifdef SSL_DEBUG
+	{
+	/* Print out local port of connection: useful for debugging */
+	int sock;
+	struct sockaddr_in ladd;
+	socklen_t ladd_size = sizeof(ladd);
+	sock = SSL_get_fd(s);
+	getsockname(sock, (struct sockaddr *)&ladd, &ladd_size);
+	BIO_printf(bio_c_out, "LOCAL PORT is %u\n", ntohs(ladd.sin_port));
+	}
+#endif
+
+#if !defined(OPENSSL_NO_TLSEXT) && !defined(OPENSSL_NO_NEXTPROTONEG)
+	if (next_proto.status != -1) {
+		const unsigned char *proto;
+		unsigned int proto_len;
+		SSL_get0_next_proto_negotiated(s, &proto, &proto_len);
+		BIO_printf(bio, "Next protocol: (%d) ", next_proto.status);
+		BIO_write(bio, proto, proto_len);
+		BIO_write(bio, "\n", 1);
+	}
+#endif
+
+ 	{
+ 	SRTP_PROTECTION_PROFILE *srtp_profile=SSL_get_selected_srtp_profile(s);
+ 
+	if(srtp_profile)
+		BIO_printf(bio,"SRTP Extension negotiated, profile=%s\n",
+			   srtp_profile->name);
+	}
+ 
 	SSL_SESSION_print(bio,SSL_get_session(s));
+	if (keymatexportlabel != NULL)
+		{
+		BIO_printf(bio, "Keying material exporter:\n");
+		BIO_printf(bio, "    Label: '%s'\n", keymatexportlabel);
+		BIO_printf(bio, "    Length: %i bytes\n", keymatexportlen);
+		exportedkeymat = OPENSSL_malloc(keymatexportlen);
+		if (exportedkeymat != NULL)
+			{
+			if (!SSL_export_keying_material(s, exportedkeymat,
+						        keymatexportlen,
+						        keymatexportlabel,
+						        strlen(keymatexportlabel),
+						        NULL, 0, 0))
+				{
+				BIO_printf(bio, "    Error\n");
+				}
+			else
+				{
+				BIO_printf(bio, "    Keying material: ");
+				for (i=0; i<keymatexportlen; i++)
+					BIO_printf(bio, "%02X",
+						   exportedkeymat[i]);
+				BIO_printf(bio, "\n");
+				}
+			OPENSSL_free(exportedkeymat);
+			}
+		}
 	BIO_printf(bio,"---\n");
 	if (peer != NULL)
 		X509_free(peer);

apps/s_server.c

@@ -186,6 +186,9 @@ typedef unsigned int u_int;
 #ifndef OPENSSL_NO_RSA
 #include <openssl/rsa.h>
 #endif
+#ifndef OPENSSL_NO_SRP
+#include <openssl/srp.h>
+#endif
 #include "s_apps.h"
 #include "timeouts.h"
 
@@ -290,6 +293,9 @@ static int cert_status_cb(SSL *s, void *arg);
 static int s_msg=0;
 static int s_quiet=0;
 
+static char *keymatexportlabel=NULL;
+static int keymatexportlen=20;
+
 static int hack=0;
 #ifndef OPENSSL_NO_ENGINE
 static char *engine_id=NULL;
@@ -298,7 +304,10 @@ static const char *session_id_prefix=NULL;
 
 static int enable_timeouts = 0;
 static long socket_mtu;
+#ifndef OPENSSL_NO_DTLS1
 static int cert_chain = 0;
+#endif
+
 
 #ifndef OPENSSL_NO_PSK
 static char *psk_identity="Client_identity";
@@ -367,6 +376,52 @@ static unsigned int psk_server_cb(SSL *ssl, const char *identity,
         }
 #endif
 
+#ifndef OPENSSL_NO_SRP
+/* This is a context that we pass to callbacks */
+typedef struct srpsrvparm_st
+	{
+	char *login;
+	SRP_VBASE *vb;
+	SRP_user_pwd *user;
+	} srpsrvparm;
+
+/* This callback pretends to require some asynchronous logic in order to obtain
+   a verifier. When the callback is called for a new connection we return
+   with a negative value. This will provoke the accept etc to return with
+   an LOOKUP_X509. The main logic of the reinvokes the suspended call 
+   (which would normally occur after a worker has finished) and we
+   set the user parameters. 
+*/
+static int MS_CALLBACK ssl_srp_server_param_cb(SSL *s, int *ad, void *arg)
+	{
+	srpsrvparm *p = (srpsrvparm *)arg;
+	if (p->login == NULL && p->user == NULL )
+		{
+		p->login = SSL_get_srp_username(s);
+		BIO_printf(bio_err, "SRP username = \"%s\"\n", p->login);
+		return (-1) ;
+		}
+
+	if (p->user == NULL)
+		{
+		BIO_printf(bio_err, "User %s doesn't exist\n", p->login);
+		return SSL3_AL_FATAL;
+		}
+	if (SSL_set_srp_server_param(s, p->user->N, p->user->g, p->user->s, p->user->v,
+				     p->user->info) < 0)
+		{
+		*ad = SSL_AD_INTERNAL_ERROR;
+		return SSL3_AL_FATAL;
+		}
+	BIO_printf(bio_err, "SRP parameters set: username = \"%s\" info=\"%s\" \n", p->login,p->user->info);
+	/* need to check whether there are memory leaks */
+	p->user = NULL;
+	p->login = NULL;
+	return SSL_ERROR_NONE;
+	}
+
+#endif
+
 #ifdef MONOLITH
 static void s_server_init(void)
 	{
@@ -453,17 +508,25 @@ static void sv_usage(void)
 # ifndef OPENSSL_NO_JPAKE
 	BIO_printf(bio_err," -jpake arg    - JPAKE secret to use\n");
 # endif
+#endif
+#ifndef OPENSSL_NO_SRP
+	BIO_printf(bio_err," -srpvfile file      - The verifier file for SRP\n");
+	BIO_printf(bio_err," -srpuserseed string - A seed string for a default user salt.\n");
 #endif
 	BIO_printf(bio_err," -ssl2         - Just talk SSLv2\n");
 	BIO_printf(bio_err," -ssl3         - Just talk SSLv3\n");
+	BIO_printf(bio_err," -tls1_2       - Just talk TLSv1.2\n");
+	BIO_printf(bio_err," -tls1_1       - Just talk TLSv1.1\n");
 	BIO_printf(bio_err," -tls1         - Just talk TLSv1\n");
 	BIO_printf(bio_err," -dtls1        - Just talk DTLSv1\n");
 	BIO_printf(bio_err," -timeout      - Enable timeouts\n");
-	BIO_printf(bio_err," -mtu          - Set MTU\n");
+	BIO_printf(bio_err," -mtu          - Set link layer MTU\n");
 	BIO_printf(bio_err," -chain        - Read a certificate chain\n");
 	BIO_printf(bio_err," -no_ssl2      - Just disable SSLv2\n");
 	BIO_printf(bio_err," -no_ssl3      - Just disable SSLv3\n");
 	BIO_printf(bio_err," -no_tls1      - Just disable TLSv1\n");
+	BIO_printf(bio_err," -no_tls1_1    - Just disable TLSv1.1\n");
+	BIO_printf(bio_err," -no_tls1_2    - Just disable TLSv1.2\n");
 #ifndef OPENSSL_NO_DH
 	BIO_printf(bio_err," -no_dhe       - Disable ephemeral DH\n");
 #endif
@@ -489,7 +552,14 @@ static void sv_usage(void)
 	BIO_printf(bio_err,"                 not specified (default is %s)\n",TEST_CERT2);
 	BIO_printf(bio_err," -tlsextdebug  - hex dump of all TLS extensions received\n");
 	BIO_printf(bio_err," -no_ticket    - disable use of RFC4507bis session tickets\n");
+	BIO_printf(bio_err," -legacy_renegotiation - enable use of legacy renegotiation (dangerous)\n");
+# ifndef OPENSSL_NO_NEXTPROTONEG
+	BIO_printf(bio_err," -nextprotoneg arg - set the advertised protocols for the NPN extension (comma-separated list)\n");
+# endif
+        BIO_printf(bio_err," -use_srtp profiles - Offer SRTP key management with a colon-separated profile list\n");
 #endif
+	BIO_printf(bio_err," -keymatexport label   - Export keying material using label\n");
+	BIO_printf(bio_err," -keymatexportlen len  - Export len bytes of keying material (default 20)\n");
 	}
 
 static int local_argc=0;
@@ -671,7 +741,7 @@ static int MS_CALLBACK ssl_servername_cb(SSL *s, int *ad, void *arg)
 			return p->extension_error;
 		if (ctx2)
 			{
-			BIO_printf(p->biodebug,"Swiching server context.\n");
+			BIO_printf(p->biodebug,"Switching server context.\n");
 			SSL_set_SSL_CTX(s,ctx2);
 			}     
 		}
@@ -710,7 +780,7 @@ static int cert_status_cb(SSL *s, void *arg)
 	int use_ssl;
 	unsigned char *rspder = NULL;
 	int rspderlen;
-	STACK_OF(STRING) *aia = NULL;
+	STACK_OF(OPENSSL_STRING) *aia = NULL;
 	X509 *x = NULL;
 	X509_STORE_CTX inctx;
 	X509_OBJECT obj;
@@ -732,7 +802,7 @@ BIO_printf(err, "cert_status: received %d ids\n", sk_OCSP_RESPID_num(ids));
 	aia = X509_get1_ocsp(x);
 	if (aia)
 		{
-		if (!OCSP_parse_url(sk_STRING_value(aia, 0),
+		if (!OCSP_parse_url(sk_OPENSSL_STRING_value(aia, 0),
 			&host, &port, &path, &use_ssl))
 			{
 			BIO_puts(err, "cert_status: can't parse AIA URL\n");
@@ -740,7 +810,7 @@ BIO_printf(err, "cert_status: received %d ids\n", sk_OCSP_RESPID_num(ids));
 			}
 		if (srctx->verbose)
 			BIO_printf(err, "cert_status: AIA URL: %s\n",
-					sk_STRING_value(aia, 0));
+					sk_OPENSSL_STRING_value(aia, 0));
 		}
 	else
 		{
@@ -785,7 +855,7 @@ BIO_printf(err, "cert_status: received %d ids\n", sk_OCSP_RESPID_num(ids));
 		if (!OCSP_REQUEST_add_ext(req, ext, -1))
 			goto err;
 		}
-	resp = process_responder(err, req, host, path, port, use_ssl,
+	resp = process_responder(err, req, host, path, port, use_ssl, NULL,
 					srctx->timeout);
 	if (!resp)
 		{
@@ -823,6 +893,26 @@ BIO_printf(err, "cert_status: received %d ids\n", sk_OCSP_RESPID_num(ids));
 	ret = SSL_TLSEXT_ERR_ALERT_FATAL;
 	goto done;
 	}
+
+# ifndef OPENSSL_NO_NEXTPROTONEG
+/* This is the context that we pass to next_proto_cb */
+typedef struct tlsextnextprotoctx_st {
+	unsigned char *data;
+	unsigned int len;
+} tlsextnextprotoctx;
+
+static int next_proto_cb(SSL *s, const unsigned char **data, unsigned int *len, void *arg)
+	{
+	tlsextnextprotoctx *next_proto = arg;
+
+	*data = next_proto->data;
+	*len = next_proto->len;
+
+	return SSL_TLSEXT_ERR_OK;
+	}
+# endif  /* ndef OPENSSL_NO_NEXTPROTONEG */
+
+
 #endif
 
 int MAIN(int, char **);
@@ -830,11 +920,15 @@ int MAIN(int, char **);
 #ifndef OPENSSL_NO_JPAKE
 static char *jpake_secret = NULL;
 #endif
+#ifndef OPENSSL_NO_SRP
+	static srpsrvparm srp_callback_parm;
+#endif
+static char *srtp_profiles = NULL;
 
 int MAIN(int argc, char *argv[])
 	{
-	X509_STORE *store = NULL;
-	int vflags = 0;
+	X509_VERIFY_PARAM *vpm = NULL;
+	int badarg = 0;
 	short port=PORT;
 	char *CApath=NULL,*CAfile=NULL;
 	unsigned char *context = NULL;
@@ -857,24 +951,25 @@ int MAIN(int argc, char *argv[])
 	int s_dcert_format = FORMAT_PEM, s_dkey_format = FORMAT_PEM;
 	X509 *s_cert = NULL, *s_dcert = NULL;
 	EVP_PKEY *s_key = NULL, *s_dkey = NULL;
+	int no_cache = 0;
 #ifndef OPENSSL_NO_TLSEXT
 	EVP_PKEY *s_key2 = NULL;
 	X509 *s_cert2 = NULL;
-#endif
-#ifndef OPENSSL_NO_TLSEXT
         tlsextctx tlsextcbp = {NULL, NULL, SSL_TLSEXT_ERR_ALERT_WARNING};
+# ifndef OPENSSL_NO_NEXTPROTONEG
+	const char *next_proto_neg_in = NULL;
+	tlsextnextprotoctx next_proto;
+# endif
 #endif
 #ifndef OPENSSL_NO_PSK
 	/* by default do not send a PSK identity hint */
 	static char *psk_identity_hint=NULL;
 #endif
-#if !defined(OPENSSL_NO_SSL2) && !defined(OPENSSL_NO_SSL3)
-	meth=SSLv23_server_method();
-#elif !defined(OPENSSL_NO_SSL3)
-	meth=SSLv3_server_method();
-#elif !defined(OPENSSL_NO_SSL2)
-	meth=SSLv2_server_method();
+#ifndef OPENSSL_NO_SRP
+	char *srpuserseed = NULL;
+	char *srp_verifier_file = NULL;
 #endif
+	meth=SSLv23_server_method();
 
 	local_argc=argc;
 	local_argv=argv;
@@ -999,18 +1094,20 @@ int MAIN(int argc, char *argv[])
 			if (--argc < 1) goto bad;
 			CApath= *(++argv);
 			}
-		else if (strcmp(*argv,"-crl_check") == 0)
+		else if (strcmp(*argv,"-no_cache") == 0)
+			no_cache = 1;
+		else if (args_verify(&argv, &argc, &badarg, bio_err, &vpm))
 			{
-			vflags |= X509_V_FLAG_CRL_CHECK;
-			}
-		else if (strcmp(*argv,"-crl_check_all") == 0)
-			{
-			vflags |= X509_V_FLAG_CRL_CHECK|X509_V_FLAG_CRL_CHECK_ALL;
+			if (badarg)
+				goto bad;
+			continue;
 			}
 		else if (strcmp(*argv,"-verify_return_error") == 0)
 			verify_return_error = 1;
 		else if	(strcmp(*argv,"-serverpref") == 0)
 			{ off|=SSL_OP_CIPHER_SERVER_PREFERENCE; }
+		else if (strcmp(*argv,"-legacy_renegotiation") == 0)
+			off|=SSL_OP_ALLOW_UNSAFE_LEGACY_RENEGOTIATION;
 		else if	(strcmp(*argv,"-cipher") == 0)
 			{
 			if (--argc < 1) goto bad;
@@ -1097,12 +1194,26 @@ int MAIN(int argc, char *argv[])
 			psk_key=*(++argv);
 			for (i=0; i<strlen(psk_key); i++)
 				{
-				if (isxdigit((int)psk_key[i]))
+				if (isxdigit((unsigned char)psk_key[i]))
 					continue;
 				BIO_printf(bio_err,"Not a hex number '%s'\n",*argv);
 				goto bad;
 				}
 			}
+#endif
+#ifndef OPENSSL_NO_SRP
+		else if (strcmp(*argv, "-srpvfile") == 0)
+			{
+			if (--argc < 1) goto bad;
+			srp_verifier_file = *(++argv);
+			meth=TLSv1_server_method();
+			}
+		else if (strcmp(*argv, "-srpuserseed") == 0)
+			{
+			if (--argc < 1) goto bad;
+			srpuserseed = *(++argv);
+			meth=TLSv1_server_method();
+			}
 #endif
 		else if	(strcmp(*argv,"-www") == 0)
 			{ www=1; }
@@ -1116,6 +1227,10 @@ int MAIN(int argc, char *argv[])
 			{ off|=SSL_OP_NO_SSLv3; }
 		else if	(strcmp(*argv,"-no_tls1") == 0)
 			{ off|=SSL_OP_NO_TLSv1; }
+		else if	(strcmp(*argv,"-no_tls1_1") == 0)
+			{ off|=SSL_OP_NO_TLSv1_1; }
+		else if	(strcmp(*argv,"-no_tls1_2") == 0)
+			{ off|=SSL_OP_NO_TLSv1_2; }
 		else if	(strcmp(*argv,"-no_comp") == 0)
 			{ off|=SSL_OP_NO_COMPRESSION; }
 #ifndef OPENSSL_NO_TLSEXT
@@ -1133,6 +1248,10 @@ int MAIN(int argc, char *argv[])
 #ifndef OPENSSL_NO_TLS1
 		else if	(strcmp(*argv,"-tls1") == 0)
 			{ meth=TLSv1_server_method(); }
+		else if	(strcmp(*argv,"-tls1_1") == 0)
+			{ meth=TLSv1_1_server_method(); }
+		else if	(strcmp(*argv,"-tls1_2") == 0)
+			{ meth=TLSv1_2_server_method(); }
 #endif
 #ifndef OPENSSL_NO_DTLS1
 		else if	(strcmp(*argv,"-dtls1") == 0)
@@ -1185,7 +1304,13 @@ int MAIN(int argc, char *argv[])
 			if (--argc < 1) goto bad;
 			s_key_file2= *(++argv);
 			}
-			
+# ifndef OPENSSL_NO_NEXTPROTONEG
+		else if	(strcmp(*argv,"-nextprotoneg") == 0)
+			{
+			if (--argc < 1) goto bad;
+			next_proto_neg_in = *(++argv);
+			}
+# endif
 #endif
 #if !defined(OPENSSL_NO_JPAKE) && !defined(OPENSSL_NO_PSK)
 		else if (strcmp(*argv,"-jpake") == 0)
@@ -1194,6 +1319,22 @@ int MAIN(int argc, char *argv[])
 			jpake_secret = *(++argv);
 			}
 #endif
+		else if (strcmp(*argv,"-use_srtp") == 0)
+			{
+			if (--argc < 1) goto bad;
+			srtp_profiles = *(++argv);
+			}
+		else if (strcmp(*argv,"-keymatexport") == 0)
+			{
+			if (--argc < 1) goto bad;
+			keymatexportlabel= *(++argv);
+			}
+		else if (strcmp(*argv,"-keymatexportlen") == 0)
+			{
+			if (--argc < 1) goto bad;
+			keymatexportlen=atoi(*(++argv));
+			if (keymatexportlen == 0) goto bad;
+			}
 		else
 			{
 			BIO_printf(bio_err,"unknown option %s\n",*argv);
@@ -1290,6 +1431,22 @@ bad:
 				goto end;
 				}
 			}
+
+# ifndef OPENSSL_NO_NEXTPROTONEG
+		if (next_proto_neg_in)
+			{
+			unsigned short len;
+			next_proto.data = next_protos_parse(&len,
+				next_proto_neg_in);
+			if (next_proto.data == NULL)
+				goto end;
+			next_proto.len = len;
+			}
+		else
+			{
+			next_proto.data = NULL;
+			}
+# endif
 #endif
 		}
 
@@ -1388,8 +1545,13 @@ bad:
 	if (socket_type == SOCK_DGRAM) SSL_CTX_set_read_ahead(ctx, 1);
 
 	if (state) SSL_CTX_set_info_callback(ctx,apps_ssl_info_callback);
+	if (no_cache)
+		SSL_CTX_set_session_cache_mode(ctx, SSL_SESS_CACHE_OFF);
+	else
+		SSL_CTX_sess_set_cache_size(ctx,128);
 
-	SSL_CTX_sess_set_cache_size(ctx,128);
+	if (srtp_profiles != NULL)
+		SSL_CTX_set_tlsext_use_srtp(ctx, srtp_profiles);
 
 #if 0
 	if (cipher == NULL) cipher=getenv("SSL_CIPHER");
@@ -1410,8 +1572,8 @@ bad:
 		ERR_print_errors(bio_err);
 		/* goto end; */
 		}
-	store = SSL_CTX_get_cert_store(ctx);
-	X509_STORE_set_flags(store, vflags);
+	if (vpm)
+		SSL_CTX_set1_param(ctx, vpm);
 
 #ifndef OPENSSL_NO_TLSEXT
 	if (s_cert2)
@@ -1455,16 +1617,24 @@ bad:
 
 		if (state) SSL_CTX_set_info_callback(ctx2,apps_ssl_info_callback);
 
-		SSL_CTX_sess_set_cache_size(ctx2,128);
+		if (no_cache)
+			SSL_CTX_set_session_cache_mode(ctx2,SSL_SESS_CACHE_OFF);
+		else
+			SSL_CTX_sess_set_cache_size(ctx2,128);
 
 		if ((!SSL_CTX_load_verify_locations(ctx2,CAfile,CApath)) ||
 			(!SSL_CTX_set_default_verify_paths(ctx2)))
 			{
 			ERR_print_errors(bio_err);
 			}
-		store = SSL_CTX_get_cert_store(ctx2);
-		X509_STORE_set_flags(store, vflags);
+		if (vpm)
+			SSL_CTX_set1_param(ctx2, vpm);
 		}
+
+# ifndef OPENSSL_NO_NEXTPROTONEG
+	if (next_proto.data)
+		SSL_CTX_set_next_protos_advertised_cb(ctx, next_proto_cb, &next_proto);
+# endif
 #endif 
 
 #ifndef OPENSSL_NO_DH
@@ -1654,6 +1824,10 @@ bad:
 	SSL_CTX_set_session_id_context(ctx,(void*)&s_server_session_id_context,
 		sizeof s_server_session_id_context);
 
+	/* Set DTLS cookie generation and verification callbacks */
+	SSL_CTX_set_cookie_generate_cb(ctx, generate_cookie_callback);
+	SSL_CTX_set_cookie_verify_cb(ctx, verify_cookie_callback);
+
 #ifndef OPENSSL_NO_TLSEXT
 	if (ctx2)
 		{
@@ -1669,6 +1843,25 @@ bad:
 		}
 #endif
 
+#ifndef OPENSSL_NO_SRP
+	if (srp_verifier_file != NULL)
+		{
+		srp_callback_parm.vb = SRP_VBASE_new(srpuserseed);
+		srp_callback_parm.user = NULL;
+		srp_callback_parm.login = NULL;
+		if ((ret = SRP_VBASE_init(srp_callback_parm.vb, srp_verifier_file)) != SRP_NO_ERROR)
+			{
+			BIO_printf(bio_err,
+				   "Cannot initialize SRP verifier file \"%s\":ret=%d\n",
+				   srp_verifier_file, ret);
+				goto end;
+			}
+		SSL_CTX_set_verify(ctx, SSL_VERIFY_NONE,verify_callback);
+		SSL_CTX_set_srp_cb_arg(ctx, &srp_callback_parm);  			
+		SSL_CTX_set_srp_username_callback(ctx, ssl_srp_server_param_cb);
+		}
+	else
+#endif
 	if (CAfile != NULL)
 		{
 		SSL_CTX_set_client_CA_list(ctx,SSL_load_client_CA_file(CAfile));
@@ -1750,8 +1943,14 @@ static int sv_body(char *hostname, int s, unsigned char *context)
 	unsigned long l;
 	SSL *con=NULL;
 	BIO *sbio;
+#ifndef OPENSSL_NO_KRB5
+	KSSL_CTX *kctx;
+#endif
+	struct timeval timeout;
 #if defined(OPENSSL_SYS_WINDOWS) || defined(OPENSSL_SYS_MSDOS) || defined(OPENSSL_SYS_NETWARE) || defined(OPENSSL_SYS_BEOS_R5)
 	struct timeval tv;
+#else
+	struct timeval *timeoutp;
 #endif
 
 	if ((buf=OPENSSL_malloc(bufsize)) == NULL)
@@ -1787,12 +1986,11 @@ static int sv_body(char *hostname, int s, unsigned char *context)
 		}
 #endif
 #ifndef OPENSSL_NO_KRB5
-		if ((con->kssl_ctx = kssl_ctx_new()) != NULL)
+		if ((kctx = kssl_ctx_new()) != NULL)
                         {
-                        kssl_ctx_setstring(con->kssl_ctx, KSSL_SERVICE,
-								KRB5SVC);
-                        kssl_ctx_setstring(con->kssl_ctx, KSSL_KEYTAB,
-								KRB5KEYTAB);
+			SSL_set0_kssl_ctx(con, kctx);
+                        kssl_ctx_setstring(kctx, KSSL_SERVICE, KRB5SVC);
+                        kssl_ctx_setstring(kctx, KSSL_KEYTAB, KRB5KEYTAB);
                         }
 #endif	/* OPENSSL_NO_KRB5 */
 		if(context)
@@ -1808,7 +2006,6 @@ static int sv_body(char *hostname, int s, unsigned char *context)
 
 	if (SSL_version(con) == DTLS1_VERSION)
 		{
-		struct timeval timeout;
 
 		sbio=BIO_new_dgram(s,BIO_NOCLOSE);
 
@@ -1823,10 +2020,10 @@ static int sv_body(char *hostname, int s, unsigned char *context)
 			BIO_ctrl(sbio, BIO_CTRL_DGRAM_SET_SEND_TIMEOUT, 0, &timeout);
 			}
 
-		if (socket_mtu > 0)
+		if (socket_mtu > 28)
 			{
 			SSL_set_options(con, SSL_OP_NO_QUERY_MTU);
-			SSL_set_mtu(con, socket_mtu);
+			SSL_set_mtu(con, socket_mtu - 28);
 			}
 		else
 			/* want to do MTU discovery */
@@ -1856,7 +2053,7 @@ static int sv_body(char *hostname, int s, unsigned char *context)
 
 	if (s_debug)
 		{
-		con->debug=1;
+		SSL_set_debug(con, 1);
 		BIO_set_callback(SSL_get_rbio(con),bio_dump_callback);
 		BIO_set_callback_arg(SSL_get_rbio(con),(char *)bio_s_out);
 		}
@@ -1919,7 +2116,19 @@ static int sv_body(char *hostname, int s, unsigned char *context)
 				read_from_terminal = 1;
 			(void)fcntl(fileno(stdin), F_SETFL, 0);
 #else
-			i=select(width,(void *)&readfds,NULL,NULL,NULL);
+			if ((SSL_version(con) == DTLS1_VERSION) &&
+				DTLSv1_get_timeout(con, &timeout))
+				timeoutp = &timeout;
+			else
+				timeoutp = NULL;
+
+			i=select(width,(void *)&readfds,NULL,NULL,timeoutp);
+
+			if ((SSL_version(con) == DTLS1_VERSION) && DTLSv1_handle_timeout(con) > 0)
+				{
+				BIO_printf(bio_err,"TIMEOUT occured\n");
+				}
+
 			if (i <= 0) continue;
 			if (FD_ISSET(fileno(stdin),&readfds))
 				read_from_terminal = 1;
@@ -1973,6 +2182,16 @@ static int sv_body(char *hostname, int s, unsigned char *context)
 					goto err;
 					}
 
+#ifndef OPENSSL_NO_HEARTBEATS
+				if ((buf[0] == 'B') &&
+					((buf[1] == '\n') || (buf[1] == '\r')))
+					{
+					BIO_printf(bio_err,"HEARTBEATING\n");
+					SSL_heartbeat(con);
+					i=0;
+					continue;
+					}
+#endif
 				if ((buf[0] == 'r') && 
 					((buf[1] == '\n') || (buf[1] == '\r')))
 					{
@@ -2016,6 +2235,18 @@ static int sv_body(char *hostname, int s, unsigned char *context)
 { static count=0; if (++count == 100) { count=0; SSL_renegotiate(con); } }
 #endif
 				k=SSL_write(con,&(buf[l]),(unsigned int)i);
+#ifndef OPENSSL_NO_SRP
+				while (SSL_get_error(con,k) == SSL_ERROR_WANT_X509_LOOKUP)
+					{
+					BIO_printf(bio_s_out,"LOOKUP renego during write\n");
+					srp_callback_parm.user = SRP_VBASE_get_by_user(srp_callback_parm.vb, srp_callback_parm.login); 
+					if (srp_callback_parm.user) 
+						BIO_printf(bio_s_out,"LOOKUP done %s\n",srp_callback_parm.user->info);
+					else 
+						BIO_printf(bio_s_out,"LOOKUP not successful\n");
+						k=SSL_write(con,&(buf[l]),(unsigned int)i);
+					}
+#endif
 				switch (SSL_get_error(con,k))
 					{
 				case SSL_ERROR_NONE:
@@ -2063,6 +2294,18 @@ static int sv_body(char *hostname, int s, unsigned char *context)
 				{
 again:	
 				i=SSL_read(con,(char *)buf,bufsize);
+#ifndef OPENSSL_NO_SRP
+				while (SSL_get_error(con,i) == SSL_ERROR_WANT_X509_LOOKUP)
+					{
+					BIO_printf(bio_s_out,"LOOKUP renego during read\n");
+					srp_callback_parm.user = SRP_VBASE_get_by_user(srp_callback_parm.vb, srp_callback_parm.login); 
+					if (srp_callback_parm.user) 
+						BIO_printf(bio_s_out,"LOOKUP done %s\n",srp_callback_parm.user->info);
+					else 
+						BIO_printf(bio_s_out,"LOOKUP not successful\n");
+					i=SSL_read(con,(char *)buf,bufsize);
+					}
+#endif
 				switch (SSL_get_error(con,i))
 					{
 				case SSL_ERROR_NONE:
@@ -2075,7 +2318,6 @@ again:
 					break;
 				case SSL_ERROR_WANT_WRITE:
 				case SSL_ERROR_WANT_READ:
-				case SSL_ERROR_WANT_X509_LOOKUP:
 					BIO_printf(bio_s_out,"Read BLOCK\n");
 					break;
 				case SSL_ERROR_SYSCALL:
@@ -2130,8 +2372,30 @@ static int init_ssl_connection(SSL *con)
 	X509 *peer;
 	long verify_error;
 	MS_STATIC char buf[BUFSIZ];
+#ifndef OPENSSL_NO_KRB5
+	char *client_princ;
+#endif
+#if !defined(OPENSSL_NO_TLSEXT) && !defined(OPENSSL_NO_NEXTPROTONEG)
+	const unsigned char *next_proto_neg;
+	unsigned next_proto_neg_len;
+#endif
+	unsigned char *exportedkeymat;
 
-	if ((i=SSL_accept(con)) <= 0)
+
+	i=SSL_accept(con);
+#ifndef OPENSSL_NO_SRP
+	while (i <= 0 &&  SSL_get_error(con,i) == SSL_ERROR_WANT_X509_LOOKUP) 
+		{
+			BIO_printf(bio_s_out,"LOOKUP during accept %s\n",srp_callback_parm.login);
+			srp_callback_parm.user = SRP_VBASE_get_by_user(srp_callback_parm.vb, srp_callback_parm.login); 
+			if (srp_callback_parm.user) 
+				BIO_printf(bio_s_out,"LOOKUP done %s\n",srp_callback_parm.user->info);
+			else 
+				BIO_printf(bio_s_out,"LOOKUP not successful\n");
+			i=SSL_accept(con);
+		}
+#endif
+	if (i <= 0)
 		{
 		if (BIO_sock_should_retry(i))
 			{
@@ -2169,17 +2433,67 @@ static int init_ssl_connection(SSL *con)
 		BIO_printf(bio_s_out,"Shared ciphers:%s\n",buf);
 	str=SSL_CIPHER_get_name(SSL_get_current_cipher(con));
 	BIO_printf(bio_s_out,"CIPHER is %s\n",(str != NULL)?str:"(NONE)");
-	if (con->hit) BIO_printf(bio_s_out,"Reused session-id\n");
+#if !defined(OPENSSL_NO_TLSEXT) && !defined(OPENSSL_NO_NEXTPROTONEG)
+	SSL_get0_next_proto_negotiated(con, &next_proto_neg, &next_proto_neg_len);
+	if (next_proto_neg)
+		{
+		BIO_printf(bio_s_out,"NEXTPROTO is ");
+		BIO_write(bio_s_out, next_proto_neg, next_proto_neg_len);
+		BIO_printf(bio_s_out, "\n");
+		}
+#endif
+	{
+	SRTP_PROTECTION_PROFILE *srtp_profile
+	  = SSL_get_selected_srtp_profile(con);
+
+	if(srtp_profile)
+		BIO_printf(bio_s_out,"SRTP Extension negotiated, profile=%s\n",
+			   srtp_profile->name);
+	}
+	if (SSL_cache_hit(con)) BIO_printf(bio_s_out,"Reused session-id\n");
 	if (SSL_ctrl(con,SSL_CTRL_GET_FLAGS,0,NULL) &
 		TLS1_FLAGS_TLS_PADDING_BUG)
-		BIO_printf(bio_s_out,"Peer has incorrect TLSv1 block padding\n");
+		BIO_printf(bio_s_out,
+			   "Peer has incorrect TLSv1 block padding\n");
 #ifndef OPENSSL_NO_KRB5
-	if (con->kssl_ctx->client_princ != NULL)
+	client_princ = kssl_ctx_get0_client_princ(SSL_get0_kssl_ctx(con));
+	if (client_princ != NULL)
 		{
 		BIO_printf(bio_s_out,"Kerberos peer principal is %s\n",
-			con->kssl_ctx->client_princ);
+								client_princ);
 		}
 #endif /* OPENSSL_NO_KRB5 */
+	BIO_printf(bio_s_out, "Secure Renegotiation IS%s supported\n",
+		      SSL_get_secure_renegotiation_support(con) ? "" : " NOT");
+	if (keymatexportlabel != NULL)
+		{
+		BIO_printf(bio_s_out, "Keying material exporter:\n");
+		BIO_printf(bio_s_out, "    Label: '%s'\n", keymatexportlabel);
+		BIO_printf(bio_s_out, "    Length: %i bytes\n",
+			   keymatexportlen);
+		exportedkeymat = OPENSSL_malloc(keymatexportlen);
+		if (exportedkeymat != NULL)
+			{
+			if (!SSL_export_keying_material(con, exportedkeymat,
+						        keymatexportlen,
+						        keymatexportlabel,
+						        strlen(keymatexportlabel),
+						        NULL, 0, 0))
+				{
+				BIO_printf(bio_s_out, "    Error\n");
+				}
+			else
+				{
+				BIO_printf(bio_s_out, "    Keying material: ");
+				for (i=0; i<keymatexportlen; i++)
+					BIO_printf(bio_s_out, "%02X",
+						   exportedkeymat[i]);
+				BIO_printf(bio_s_out, "\n");
+				}
+			OPENSSL_free(exportedkeymat);
+			}
+		}
+
 	return(1);
 	}
 
@@ -2197,6 +2511,9 @@ err:
 	return(ret);
 	}
 #endif
+#ifndef OPENSSL_NO_KRB5
+	char *client_princ;
+#endif
 
 #if 0
 static int load_CA(SSL_CTX *ctx, char *file)
@@ -2223,11 +2540,13 @@ static int www_body(char *hostname, int s, unsigned char *context)
 	{
 	char *buf=NULL;
 	int ret=1;
-	int i,j,k,blank,dot;
+	int i,j,k,dot;
 	SSL *con;
 	const SSL_CIPHER *c;
 	BIO *io,*ssl_bio,*sbio;
-	long total_bytes;
+#ifndef OPENSSL_NO_KRB5
+	KSSL_CTX *kctx;
+#endif
 
 	buf=OPENSSL_malloc(bufsize);
 	if (buf == NULL) return(0);
@@ -2259,10 +2578,10 @@ static int www_body(char *hostname, int s, unsigned char *context)
 			}
 #endif
 #ifndef OPENSSL_NO_KRB5
-	if ((con->kssl_ctx = kssl_ctx_new()) != NULL)
+	if ((kctx = kssl_ctx_new()) != NULL)
 		{
-		kssl_ctx_setstring(con->kssl_ctx, KSSL_SERVICE, KRB5SVC);
-		kssl_ctx_setstring(con->kssl_ctx, KSSL_KEYTAB, KRB5KEYTAB);
+		kssl_ctx_setstring(kctx, KSSL_SERVICE, KRB5SVC);
+		kssl_ctx_setstring(kctx, KSSL_KEYTAB, KRB5KEYTAB);
 		}
 #endif	/* OPENSSL_NO_KRB5 */
 	if(context) SSL_set_session_id_context(con, context,
@@ -2288,7 +2607,7 @@ static int www_body(char *hostname, int s, unsigned char *context)
 
 	if (s_debug)
 		{
-		con->debug=1;
+		SSL_set_debug(con, 1);
 		BIO_set_callback(SSL_get_rbio(con),bio_dump_callback);
 		BIO_set_callback_arg(SSL_get_rbio(con),(char *)bio_s_out);
 		}
@@ -2298,13 +2617,23 @@ static int www_body(char *hostname, int s, unsigned char *context)
 		SSL_set_msg_callback_arg(con, bio_s_out);
 		}
 
-	blank=0;
 	for (;;)
 		{
 		if (hack)
 			{
 			i=SSL_accept(con);
-
+#ifndef OPENSSL_NO_SRP
+			while (i <= 0 &&  SSL_get_error(con,i) == SSL_ERROR_WANT_X509_LOOKUP) 
+		{
+			BIO_printf(bio_s_out,"LOOKUP during accept %s\n",srp_callback_parm.login);
+			srp_callback_parm.user = SRP_VBASE_get_by_user(srp_callback_parm.vb, srp_callback_parm.login); 
+			if (srp_callback_parm.user) 
+				BIO_printf(bio_s_out,"LOOKUP done %s\n",srp_callback_parm.user->info);
+			else 
+				BIO_printf(bio_s_out,"LOOKUP not successful\n");
+			i=SSL_accept(con);
+		}
+#endif
 			switch (SSL_get_error(con,i))
 				{
 			case SSL_ERROR_NONE:
@@ -2410,7 +2739,7 @@ static int www_body(char *hostname, int s, unsigned char *context)
 					}
 				BIO_puts(io,"\n");
 				}
-			BIO_printf(io,((con->hit)
+			BIO_printf(io,(SSL_cache_hit(con)
 				?"---\nReused, "
 				:"---\nNew, "));
 			c=SSL_get_current_cipher(con);
@@ -2528,7 +2857,6 @@ static int www_body(char *hostname, int s, unsigned char *context)
                                         BIO_puts(io,"HTTP/1.0 200 ok\r\nContent-type: text/plain\r\n\r\n");
                                 }
 			/* send the file */
-			total_bytes=0;
 			for (;;)
 				{
 				i=BIO_read(file,buf,bufsize);

apps/s_socket.c

@@ -62,6 +62,12 @@
 #include <errno.h>
 #include <signal.h>
 
+#ifdef FLAT_INC
+#include "e_os2.h"
+#else
+#include "../e_os2.h"
+#endif
+
 /* With IPv6, it looks like Digital has mixed up the proper order of
    recursive header file inclusion, resulting in the compiler complaining
    that u_int isn't defined, but only if _POSIX_C_SOURCE is defined, which
@@ -232,11 +238,10 @@ int init_client(int *sock, char *host, int port, int type)
 	{
 	unsigned char ip[4];
 
+	memset(ip, '\0', sizeof ip);
 	if (!host_ip(host,&(ip[0])))
-		{
-		return(0);
-		}
-	return(init_client_ip(sock,ip,port,type));
+		return 0;
+	return init_client_ip(sock,ip,port,type);
 	}
 
 static int init_client_ip(int *sock, unsigned char ip[4], int port, int type)
@@ -321,7 +326,7 @@ static int init_server_long(int *sock, int port, char *ip, int type)
 	{
 	int ret=0;
 	struct sockaddr_in server;
-	int s= -1,i;
+	int s= -1;
 
 	if (!ssl_sock_init()) return(0);
 
@@ -360,7 +365,6 @@ static int init_server_long(int *sock, int port, char *ip, int type)
 		}
 	/* Make it 128 for linux */
 	if (type==SOCK_STREAM && listen(s,128) == -1) goto err;
-	i=0;
 	*sock=s;
 	ret=1;
 err:
@@ -378,7 +382,7 @@ static int init_server(int *sock, int port, int type)
 
 static int do_accept(int acc_sock, int *sock, char **host)
 	{
-	int ret,i;
+	int ret;
 	struct hostent *h1,*h2;
 	static struct sockaddr_in from;
 	int len;
@@ -401,6 +405,7 @@ redoit:
 	if (ret == INVALID_SOCKET)
 		{
 #if defined(OPENSSL_SYS_WINDOWS) || (defined(OPENSSL_SYS_NETWARE) && !defined(NETWARE_BSDSOCK))
+		int i;
 		i=WSAGetLastError();
 		BIO_printf(bio_err,"accept error %d\n",i);
 #else
@@ -455,7 +460,6 @@ redoit:
 			BIO_printf(bio_err,"gethostbyname failure\n");
 			return(0);
 			}
-		i=0;
 		if (h2->h_addrtype != AF_INET)
 			{
 			BIO_printf(bio_err,"gethostbyname addr is not AF_INET\n");

apps/server.pem

@@ -1,369 +1,52 @@
-issuer= /C=AU/ST=Queensland/O=CryptSoft Pty Ltd/CN=Test CA (1024 bit)
-subject= /C=AU/ST=Queensland/O=CryptSoft Pty Ltd/CN=Server test cert (512 bit)
+subject= C = UK, O = OpenSSL Group, OU = FOR TESTING PURPOSES ONLY, CN = Test Server Cert
+issuer= C = UK, O = OpenSSL Group, OU = FOR TESTING PURPOSES ONLY, CN = OpenSSL Test Intermediate CA
 -----BEGIN CERTIFICATE-----
-MIIB6TCCAVICAQYwDQYJKoZIhvcNAQEEBQAwWzELMAkGA1UEBhMCQVUxEzARBgNV
-BAgTClF1ZWVuc2xhbmQxGjAYBgNVBAoTEUNyeXB0U29mdCBQdHkgTHRkMRswGQYD
-VQQDExJUZXN0IENBICgxMDI0IGJpdCkwHhcNMDAxMDE2MjIzMTAzWhcNMDMwMTE0
-MjIzMTAzWjBjMQswCQYDVQQGEwJBVTETMBEGA1UECBMKUXVlZW5zbGFuZDEaMBgG
-A1UEChMRQ3J5cHRTb2Z0IFB0eSBMdGQxIzAhBgNVBAMTGlNlcnZlciB0ZXN0IGNl
-cnQgKDUxMiBiaXQpMFwwDQYJKoZIhvcNAQEBBQADSwAwSAJBAJ+zw4Qnlf8SMVIP
-Fe9GEcStgOY2Ww/dgNdhjeD8ckUJNP5VZkVDTGiXav6ooKXfX3j/7tdkuD8Ey2//
-Kv7+ue0CAwEAATANBgkqhkiG9w0BAQQFAAOBgQCT0grFQeZaqYb5EYfk20XixZV4
-GmyAbXMftG1Eo7qGiMhYzRwGNWxEYojf5PZkYZXvSqZ/ZXHXa4g59jK/rJNnaVGM
-k+xIX8mxQvlV0n5O9PIha5BX5teZnkHKgL8aKKLKW1BK7YTngsfSzzaeame5iKfz
-itAE+OjGF+PFKbwX8Q==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 -----END CERTIFICATE-----
 -----BEGIN RSA PRIVATE KEY-----
-MIIBPAIBAAJBAJ+zw4Qnlf8SMVIPFe9GEcStgOY2Ww/dgNdhjeD8ckUJNP5VZkVD
-TGiXav6ooKXfX3j/7tdkuD8Ey2//Kv7+ue0CAwEAAQJAN6W31vDEP2DjdqhzCDDu
-OA4NACqoiFqyblo7yc2tM4h4xMbC3Yx5UKMN9ZkCtX0gzrz6DyF47bdKcWBzNWCj
-gQIhANEoojVt7hq+SQ6MCN6FTAysGgQf56Q3TYoJMoWvdiXVAiEAw3e3rc+VJpOz
-rHuDo6bgpjUAAXM+v3fcpsfZSNO6V7kCIQCtbVjanpUwvZkMI9by02oUk9taki3b
-PzPfAfNPYAbCJQIhAJXNQDWyqwn/lGmR11cqY2y9nZ1+5w3yHGatLrcDnQHxAiEA
-vnlEGo8K85u+KwIOimM48ZG8oTk7iFdkqLJR1utT3aU=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 -----END RSA PRIVATE KEY-----
-subject=/C=US/O=AT&T Bell Laboratories/OU=Prototype Research CA
-issuer= /C=US/O=AT&T Bell Laboratories/OU=Prototype Research CA
-notBefore=950413210656Z
-notAfter =970412210656Z
------BEGIN X509 CERTIFICATE-----
-
-MIICCDCCAXECAQAwDQYJKoZIhvcNAQEEBQAwTjELMAkGA1UEBhMCVVMxHzAdBgNV
-BAoUFkFUJlQgQmVsbCBMYWJvcmF0b3JpZXMxHjAcBgNVBAsUFVByb3RvdHlwZSBS
-ZXNlYXJjaCBDQTAeFw05NTA0MTMyMTA2NTZaFw05NzA0MTIyMTA2NTZaME4xCzAJ
-BgNVBAYTAlVTMR8wHQYDVQQKFBZBVCZUIEJlbGwgTGFib3JhdG9yaWVzMR4wHAYD
-VQQLFBVQcm90b3R5cGUgUmVzZWFyY2ggQ0EwgZwwDQYJKoZIhvcNAQEBBQADgYoA
-MIGGAoGAebOmgtSCl+wCYZc86UGYeTLY8cjmW2P0FN8ToT/u2pECCoFdrlycX0OR
-3wt0ZhpFXLVNeDnHwEE9veNUih7pCL2ZBFqoIoQkB1lZmXRiVtjGonz8BLm/qrFM
-YHb0lme/Ol+s118mwKVxnn6bSAeI/OXKhLaVdYZWk+aEaxEDkVkCAQ8wDQYJKoZI
-hvcNAQEEBQADgYEAAZMG14lZmZ8bahkaHaTV9dQf4p2FZiQTFwHP9ZyGsXPC+LT5
-dG5iTaRmyjNIJdPWohZDl97kAci79aBndvuEvRKOjLHs3WRGBIwERnAcnY9Mz8u/
-zIHK23PjYVxGGaZd669OJwD0CYyqH22HH9nFUGaoJdsv39ChW0NRdLE9+y8=
------END X509 CERTIFICATE-----
-issuer= /C=AU/ST=Queensland/O=CryptSoft Pty Ltd/CN=Test PCA (1024 bit)
-subject=/C=AU/ST=Queensland/O=CryptSoft Pty Ltd/CN=Test CA (1024 bit)
------BEGIN CERTIFICATE-----
-MIICJjCCAY8CAQAwDQYJKoZIhvcNAQEEBQAwXDELMAkGA1UEBhMCQVUxEzARBgNV
-BAgTClF1ZWVuc2xhbmQxGjAYBgNVBAoTEUNyeXB0U29mdCBQdHkgTHRkMRwwGgYD
-VQQDExNUZXN0IFBDQSAoMTAyNCBiaXQpMB4XDTk3MDYwOTEzNTc0M1oXDTAxMDYw
-OTEzNTc0M1owWzELMAkGA1UEBhMCQVUxEzARBgNVBAgTClF1ZWVuc2xhbmQxGjAY
-BgNVBAoTEUNyeXB0U29mdCBQdHkgTHRkMRswGQYDVQQDExJUZXN0IENBICgxMDI0
-IGJpdCkwgZ8wDQYJKoZIhvcNAQEBBQADgY0AMIGJAoGBAKO7o8t116VP6cgybTsZ
-DCZhr95nYlZuya3aCi1IKoztqwWnjbmDFIriOqGFPrZQ+moMETC9D59iRW/dFXSv
-1F65ka/XY2hLh9exCCo7XuUcDs53Qp3bI3AmMqHjgzE8oO3ajyJAzJkTTOUecQU2
-mw/gI4tMM0LqWMQS7luTy4+xAgMBAAEwDQYJKoZIhvcNAQEEBQADgYEAM7achv3v
-hLQJcv/65eGEpBXM40ZDVoFQFFJWaY5p883HTqLB1x4FdzsXHH0QKBTcKpWwqyu4
-YDm3fb8oDugw72bCzfyZK/zVZPR/hVlqI/fvU109Qoc+7oPvIXWky71HfcK6ZBCA
-q30KIqGM/uoM60INq97qjDmCJapagcNBGQs=
------END CERTIFICATE-----
------BEGIN RSA PRIVATE KEY-----
-MIICXQIBAAKBgQCju6PLddelT+nIMm07GQwmYa/eZ2JWbsmt2gotSCqM7asFp425
-gxSK4jqhhT62UPpqDBEwvQ+fYkVv3RV0r9ReuZGv12NoS4fXsQgqO17lHA7Od0Kd
-2yNwJjKh44MxPKDt2o8iQMyZE0zlHnEFNpsP4COLTDNC6ljEEu5bk8uPsQIDAQAB
-AoGAVZmpFZsDZfr0l2S9tLLwpjRWNOlKATQkno6q2WesT0eGLQufTciY+c8ypfU6
-hyio8r5iUl/VhhdjhAtKx1mRpiotftHo/eYf8rtsrnprOnWG0bWjLjtIoMbcxGn2
-J3bN6LJmbJMjDs0eJ3KnTu646F3nDUw2oGAwmpzKXA1KAP0CQQDRvQhxk2D3Pehs
-HvG665u2pB5ipYQngEFlZO7RHJZzJOZEWSLuuMqaF/7pTfA5jiBvWqCgJeCRRInL
-21ru4dlPAkEAx9jj7BgKn5TYnMoBSSe0afjsV9oApVpN1Nacb1YDtCwy+scp3++s
-nFxlv98wxIlSdpwMUn+AUWfjiWR7Tu/G/wJBAJ/KjwZIrFVxewP0x2ILYsTRYLzz
-MS4PDsO7FB+I0i7DbBOifXS2oNSpd3I0CNMwrxFnUHzynpbOStVfN3ZL5w0CQQCa
-pwFahxBRhkJKsxhjoFJBX9yl75JoY4Wvm5Tbo9ih6UJaRx3kqfkN14L2BKYcsZgb
-KY9vmDOYy6iNfjDeWTfJAkBkfPUb8oTJ/nSP5zN6sqGxSY4krc4xLxpRmxoJ8HL2
-XfhqXkTzbU13RX9JJ/NZ8vQN9Vm2NhxRGJocQkmcdVtJ
------END RSA PRIVATE KEY-----
------BEGIN X509 CERTIFICATE-----
-MIICYDCCAiACAgEoMAkGBSsOAwINBQAwfDELMAkGA1UEBhMCVVMxNjA0BgNVBAoT
-LU5hdGlvbmFsIEFlcm9uYXV0aWNzIGFuZCBTcGFjZSBBZG1pbmlzdHJhdGlvbjEZ
-MBcGA1UECxMQVGVzdCBFbnZpcm9ubWVudDEaMBgGA1UECxMRRFNTLU5BU0EtUGls
-b3QtQ0EwHhcNOTYwMjI2MTYzMjQ1WhcNOTcwMjI1MTYzMjQ1WjB8MQswCQYDVQQG
-EwJVUzE2MDQGA1UEChMtTmF0aW9uYWwgQWVyb25hdXRpY3MgYW5kIFNwYWNlIEFk
-bWluaXN0cmF0aW9uMRkwFwYDVQQLExBUZXN0IEVudmlyb25tZW50MRowGAYDVQQL
-ExFEU1MtTkFTQS1QaWxvdC1DQTCB8jAJBgUrDgMCDAUAA4HkADCB4AJBAMA/ssKb
-hPNUG7ZlASfVwEJU21O5OyF/iyBzgHI1O8eOhJGUYO8cc8wDMjR508Mr9cp6Uhl/
-ZB7FV5GkLNEnRHYCQQDUEaSg45P2qrDwixTRhFhmWz5Nvc4lRFQ/42XPcchiJBLb
-bn3QK74T2IxY1yY+kCNq8XrIqf5fJJzIH0J/xUP3AhUAsg2wsQHfDGYk/BOSulX3
-fVd0geUCQQCzCFUQAh+ZkEmp5804cs6ZWBhrUAfnra8lJItYo9xPcXgdIfLfibcX
-R71UsyO77MRD7B0+Ag2tq794IleCVcEEMAkGBSsOAwINBQADLwAwLAIUUayDfreR
-Yh2WeU86/pHNdkUC1IgCFEfxe1f0oMpxJyrJ5XIxTi7vGdoK
------END X509 CERTIFICATE-----
------BEGIN X509 CERTIFICATE-----
-
-MIICGTCCAdgCAwCqTDAJBgUrDgMCDQUAMHwxCzAJBgNVBAYTAlVTMTYwNAYDVQQK
-Ey1OYXRpb25hbCBBZXJvbmF1dGljcyBhbmQgU3BhY2UgQWRtaW5pc3RyYXRpb24x
-GTAXBgNVBAsTEFRlc3QgRW52aXJvbm1lbnQxGjAYBgNVBAsTEURTUy1OQVNBLVBp
-bG90LUNBMB4XDTk2MDUxNDE3MDE0MVoXDTk3MDUxNDE3MDE0MVowMzELMAkGA1UE
-BhMCQVUxDzANBgNVBAoTBk1pbmNvbTETMBEGA1UEAxMKRXJpYyBZb3VuZzCB8jAJ
-BgUrDgMCDAUAA4HkADCB4AJBAKbfHz6vE6pXXMTpswtGUec2tvnfLJUsoxE9qs4+
-ObZX7LmLvragNPUeiTJx7UOWZ5DfBj6bXLc8eYne0lP1g3ACQQDUEaSg45P2qrDw
-ixTRhFhmWz5Nvc4lRFQ/42XPcchiJBLbbn3QK74T2IxY1yY+kCNq8XrIqf5fJJzI
-H0J/xUP3AhUAsg2wsQHfDGYk/BOSulX3fVd0geUCQQCzCFUQAh+ZkEmp5804cs6Z
-WBhrUAfnra8lJItYo9xPcXgdIfLfibcXR71UsyO77MRD7B0+Ag2tq794IleCVcEE
-MAkGBSsOAwINBQADMAAwLQIUWsuuJRE3VT4ueWkWMAJMJaZjj1ECFQCYY0zX4bzM
-LC7obsrHD8XAHG+ZRG==
------END X509 CERTIFICATE-----
------BEGIN CERTIFICATE-----
-MIICTTCCAbagAwIBAgIBADANBgkqhkiG9w0BAQQFADBMMQswCQYDVQQGEwJHQjEM
-MAoGA1UEChMDVUNMMRgwFgYDVQQLEw9JQ0UtVEVMIFByb2plY3QxFTATBgNVBAMT
-DFRydXN0RmFjdG9yeTAeFw05NzA0MjIxNDM5MTRaFw05ODA0MjIxNDM5MTRaMEwx
-CzAJBgNVBAYTAkdCMQwwCgYDVQQKEwNVQ0wxGDAWBgNVBAsTD0lDRS1URUwgUHJv
-amVjdDEVMBMGA1UEAxMMVHJ1c3RGYWN0b3J5MIGcMAoGBFUIAQECAgQAA4GNADCB
-iQKBgQCEieR8NcXkUW1f0G6aC6u0i8q/98JqS6RxK5YmHIGKCkuTWAUjzLfUa4dt
-U9igGCjTuxaDqlzEim+t/02pmiBZT9HaX++35MjQPUWmsChcYU5WyzGErXi+rQaw
-zlwS73zM8qiPj/97lXYycWhgL0VaiDSPxRXEUdWoaGruom4mNQIDAQABo0IwQDAd
-BgNVHQ4EFgQUHal1LZr7oVg5z6lYzrhTgZRCmcUwDgYDVR0PAQH/BAQDAgH2MA8G
-A1UdEwEB/wQFMAMBAf8wDQYJKoZIhvcNAQEEBQADgYEAfaggfl6FZoioecjv0dq8
-/DXo/u11iMZvXn08gjX/zl2b4wtPbShOSY5FhkSm8GeySasz+/Nwb/uzfnIhokWi
-lfPZHtlCWtXbIy/TN51eJyq04ceDCQDWvLC2enVg9KB+GJ34b5c5VaPRzq8MBxsA
-S7ELuYGtmYgYm9NZOIr7yU0=
------END CERTIFICATE-----
------BEGIN CERTIFICATE-----
-MIIB6jCCAZQCAgEtMA0GCSqGSIb3DQEBBAUAMIGAMQswCQYDVQQGEwJVUzE2MDQG
-A1UEChMtTmF0aW9uYWwgQWVyb25hdXRpY3MgYW5kIFNwYWNlIEFkbWluaXN0cmF0
-aW9uMRkwFwYDVQQLExBUZXN0IEVudmlyb25tZW50MR4wHAYDVQQLExVNRDUtUlNB
-LU5BU0EtUGlsb3QtQ0EwHhcNOTYwNDMwMjIwNTAwWhcNOTcwNDMwMjIwNTAwWjCB
-gDELMAkGA1UEBhMCVVMxNjA0BgNVBAoTLU5hdGlvbmFsIEFlcm9uYXV0aWNzIGFu
-ZCBTcGFjZSBBZG1pbmlzdHJhdGlvbjEZMBcGA1UECxMQVGVzdCBFbnZpcm9ubWVu
-dDEeMBwGA1UECxMVTUQ1LVJTQS1OQVNBLVBpbG90LUNBMFkwCgYEVQgBAQICAgAD
-SwAwSAJBALmmX5+GqAvcrWK13rfDrNX9UfeA7f+ijyBgeFQjYUoDpFqapw4nzQBL
-bAXug8pKkRwa2Zh8YODhXsRWu2F/UckCAwEAATANBgkqhkiG9w0BAQQFAANBAH9a
-OBA+QCsjxXgnSqHx04gcU8S49DVUb1f2XVoLnHlIb8RnX0k5O6mpHT5eti9bLkiW
-GJNMJ4L0AJ/ac+SmHZc=
------END CERTIFICATE-----
------BEGIN CERTIFICATE-----
-MIICajCCAdMCBDGA0QUwDQYJKoZIhvcNAQEEBQAwfTELMAkGA1UEBhMCQ2ExDzAN
-BgNVBAcTBk5lcGVhbjEeMBwGA1UECxMVTm8gTGlhYmlsaXR5IEFjY2VwdGVkMR8w
-HQYDVQQKExZGb3IgRGVtbyBQdXJwb3NlcyBPbmx5MRwwGgYDVQQDExNFbnRydXN0
-IERlbW8gV2ViIENBMB4XDTk2MDQyNjEzMzUwMVoXDTA2MDQyNjEzMzUwMVowfTEL
-MAkGA1UEBhMCQ2ExDzANBgNVBAcTBk5lcGVhbjEeMBwGA1UECxMVTm8gTGlhYmls
-aXR5IEFjY2VwdGVkMR8wHQYDVQQKExZGb3IgRGVtbyBQdXJwb3NlcyBPbmx5MRww
-GgYDVQQDExNFbnRydXN0IERlbW8gV2ViIENBMIGdMA0GCSqGSIb3DQEBAQUAA4GL
-ADCBhwKBgQCaroS7O1DA0hm4IefNYU1cx/nqOmzEnk291d1XqznDeF4wEgakbkCc
-zTKxK791yNpXG5RmngqH7cygDRTHZJ6mfCRn0wGC+AI00F2vYTGqPGRQL1N3lZT0
-YDKFC0SQeMMjFIZ1aeQigroFQnHo0VB3zWIMpNkka8PY9lxHZAmWwQIBAzANBgkq
-hkiG9w0BAQQFAAOBgQBAx0UMVA1s54lMQyXjMX5kj99FJN5itb8bK1Rk+cegPQPF
-cWO9SEWyEjjBjIkjjzAwBkaEszFsNGxemxtXvwjIm1xEUMTVlPEWTs2qnDvAUA9W
-YqhWbhH0toGT36236QAsqCZ76rbTRVSSX2BHyJwJMG2tCRv7kRJ//NIgxj3H4w==
------END CERTIFICATE-----
-
-issuer= /C=AU/ST=Queensland/O=CryptSoft Pty Ltd/CN=Test PCA (1024 bit)
-subject=/C=AU/ST=Queensland/O=CryptSoft Pty Ltd/CN=Test PCA (1024 bit)
------BEGIN CERTIFICATE-----
-MIICJzCCAZACAQAwDQYJKoZIhvcNAQEEBQAwXDELMAkGA1UEBhMCQVUxEzARBgNV
-BAgTClF1ZWVuc2xhbmQxGjAYBgNVBAoTEUNyeXB0U29mdCBQdHkgTHRkMRwwGgYD
-VQQDExNUZXN0IFBDQSAoMTAyNCBiaXQpMB4XDTk3MDYwOTEzNTczN1oXDTAxMDYw
-OTEzNTczN1owXDELMAkGA1UEBhMCQVUxEzARBgNVBAgTClF1ZWVuc2xhbmQxGjAY
-BgNVBAoTEUNyeXB0U29mdCBQdHkgTHRkMRwwGgYDVQQDExNUZXN0IFBDQSAoMTAy
-NCBiaXQpMIGfMA0GCSqGSIb3DQEBAQUAA4GNADCBiQKBgQCdoWk/3+WcMlfjIrkg
-40ketmnQaEogQe1LLcuOJV6rKfUSAsPgwgsabJ/wn8TxA1yy3eKJbFl3OiUXMRsp
-22Jp85PmemiDzyUIStwk72qhp1imbANZvlmlCFKiQrjUyuDfu4TABmn+kkt3vR1Y
-BEOGt+IFye1UBVSATVdRJ2UVhwIDAQABMA0GCSqGSIb3DQEBBAUAA4GBABNA1u/S
-Cg/LJZWb7GliiKJsvuhxlE4E5JxQF2zMub/CSNbF97//tYSyj96sxeFQxZXbcjm9
-xt6mr/xNLA4szNQMJ4P+L7b5e/jC5DSqlwS+CUYJgaFs/SP+qJoCSu1bR3IM9XWO
-cRBpDmcBbYLkSyB92WURvsZ1LtjEcn+cdQVI
------END CERTIFICATE-----
------BEGIN RSA PRIVATE KEY-----
-MIICXAIBAAKBgQCdoWk/3+WcMlfjIrkg40ketmnQaEogQe1LLcuOJV6rKfUSAsPg
-wgsabJ/wn8TxA1yy3eKJbFl3OiUXMRsp22Jp85PmemiDzyUIStwk72qhp1imbANZ
-vlmlCFKiQrjUyuDfu4TABmn+kkt3vR1YBEOGt+IFye1UBVSATVdRJ2UVhwIDAQAB
-AoGAba4fTtuap5l7/8ZsbE7Z1O32KJY4ZcOZukLOLUUhXxXduT+FTgGWujc0/rgc
-z9qYCLlNZHOouMYTgtSfYvuMuLZ11VIt0GYH+nRioLShE59Yy+zCRyC+gPigS1kz
-xvo14AsOIPYV14Tk/SsHyq6E0eTk7VzaIE197giiINUERPECQQDSKmtPTh/lRKw7
-HSZSM0I1mFWn/1zqrAbontRQY5w98QWIOe5qmzYyFbPXYT3d9BzlsMyhgiRNoBbD
-yvohSHXJAkEAwAHx6ezAZeWWzD5yXD36nyjpkVCw7Tk7TSmOceLJMWt1QcrCfqlS
-xA5jjpQ6Z8suU5DdtWAryM2sAir1WisYzwJAd6Zcx56jvAQ3xcPXsE6scBTVFzrj
-7FqZ6E+cclPzfLQ+QQsyOBE7bpI6e/FJppY26XGZXo3YGzV8IGXrt40oOQJALETG
-h86EFXo3qGOFbmsDy4pdP5nBERCu8X1xUCSfintiD4c2DInxgS5oGclnJeMcjTvL
-QjQoJCX3UJCi/OUO1QJBAKgcDHWjMvt+l1pjJBsSEZ0HX9AAIIVx0RQmbFGS+F2Q
-hhu5l77WnnZOQ9vvhV5u7NPCUF9nhU3jh60qWWO8mkc=
------END RSA PRIVATE KEY-----
-subject=/C=US/O=RSA Data Security, Inc./OU=Commercial Certification Authority
-issuer= /C=US/O=RSA Data Security, Inc./OU=Commercial Certification Authority
-notBefore=941104185834Z
-notAfter =991103185834Z
------BEGIN X509 CERTIFICATE-----
-
-MIICIzCCAZACBQJBAAAWMA0GCSqGSIb3DQEBAgUAMFwxCzAJBgNVBAYTAlVTMSAw
-HgYDVQQKExdSU0EgRGF0YSBTZWN1cml0eSwgSW5jLjErMCkGA1UECxMiQ29tbWVy
-Y2lhbCBDZXJ0aWZpY2F0aW9uIEF1dGhvcml0eTAeFw05NDExMDQxODU4MzRaFw05
-OTExMDMxODU4MzRaMFwxCzAJBgNVBAYTAlVTMSAwHgYDVQQKExdSU0EgRGF0YSBT
-ZWN1cml0eSwgSW5jLjErMCkGA1UECxMiQ29tbWVyY2lhbCBDZXJ0aWZpY2F0aW9u
-IEF1dGhvcml0eTCBmzANBgkqhkiG9w0BAQEFAAOBiQAwgYUCfgCk+4Fie84QJ93o
-975sbsZwmdu41QUDaSiCnHJ/lj+O7Kwpkj+KFPhCdr69XQO5kNTQvAayUTNfxMK/
-touPmbZiImDd298ggrTKoi8tUO2UMt7gVY3UaOLgTNLNBRYulWZcYVI4HlGogqHE
-7yXpCuaLK44xZtn42f29O2nZ6wIDAQABMA0GCSqGSIb3DQEBAgUAA34AdrW2EP4j
-9/dZYkuwX5zBaLxJu7NJbyFHXSudVMQAKD+YufKKg5tgf+tQx6sFEC097TgCwaVI
-0v5loMC86qYjFmZsGySp8+x5NRhPJsjjr1BKx6cxa9B8GJ1Qv6km+iYrRpwUqbtb
-MJhCKLVLU7tDCZJAuqiqWqTGtotXTcU=
------END X509 CERTIFICATE-----
-subject=/C=US/O=RSA Data Security, Inc./OU=Secure Server Certification Authority
-issuer= /C=US/O=RSA Data Security, Inc./OU=Secure Server Certification Authority
-notBefore=941109235417Z
-notAfter =991231235417Z
------BEGIN X509 CERTIFICATE-----
-
-MIICKTCCAZYCBQJBAAABMA0GCSqGSIb3DQEBAgUAMF8xCzAJBgNVBAYTAlVTMSAw
-HgYDVQQKExdSU0EgRGF0YSBTZWN1cml0eSwgSW5jLjEuMCwGA1UECxMlU2VjdXJl
-IFNlcnZlciBDZXJ0aWZpY2F0aW9uIEF1dGhvcml0eTAeFw05NDExMDkyMzU0MTda
-Fw05OTEyMzEyMzU0MTdaMF8xCzAJBgNVBAYTAlVTMSAwHgYDVQQKExdSU0EgRGF0
-YSBTZWN1cml0eSwgSW5jLjEuMCwGA1UECxMlU2VjdXJlIFNlcnZlciBDZXJ0aWZp
-Y2F0aW9uIEF1dGhvcml0eTCBmzANBgkqhkiG9w0BAQEFAAOBiQAwgYUCfgCSznrB
-roM+WqqJg1esJQF2DK2ujiw3zus1eGRUA+WEQFHJv48I4oqCCNIWhjdV6bEhAq12
-aIGaBaJLyUslZiJWbIgHj/eBWW2EB2VwE3F2Ppt3TONQiVaYSLkdpykaEy5KEVmc
-HhXVSVQsczppgrGXOZxtcGdI5d0t1sgeewIDAQABMA0GCSqGSIb3DQEBAgUAA34A
-iNHReSHO4ovo+MF9NFM/YYPZtgs4F7boviGNjwC4i1N+RGceIr2XJ+CchcxK9oU7
-suK+ktPlDemvXA4MRpX/oRxePug2WHpzpgr4IhFrwwk4fia7c+8AvQKk8xQNMD9h
-cHsg/jKjn7P0Z1LctO6EjJY2IN6BCINxIYoPnqk=
------END X509 CERTIFICATE-----
-subject=/C=ZA/SP=Western Cape/L=Cape Town/O=Thawte Consulting cc
-	/OU=Certification Services Division/CN=Thawte Server CA
-	/Email=server-certs@thawte.com
-issuer= /C=ZA/SP=Western Cape/L=Cape Town/O=Thawte Consulting cc
-	/OU=Certification Services Division/CN=Thawte Server CA
-	/Email=server-certs@thawte.com
------BEGIN CERTIFICATE-----
-MIIC+TCCAmICAQAwDQYJKoZIhvcNAQEEBQAwgcQxCzAJBgNVBAYTAlpBMRUwEwYD
-VQQIEwxXZXN0ZXJuIENhcGUxEjAQBgNVBAcTCUNhcGUgVG93bjEdMBsGA1UEChMU
-VGhhd3RlIENvbnN1bHRpbmcgY2MxKDAmBgNVBAsTH0NlcnRpZmljYXRpb24gU2Vy
-dmljZXMgRGl2aXNpb24xGTAXBgNVBAMTEFRoYXd0ZSBTZXJ2ZXIgQ0ExJjAkBgkq
-hkiG9w0BCQEWF3NlcnZlci1jZXJ0c0B0aGF3dGUuY29tMB4XDTk2MDcyNzE4MDc1
-N1oXDTk4MDcyNzE4MDc1N1owgcQxCzAJBgNVBAYTAlpBMRUwEwYDVQQIEwxXZXN0
-ZXJuIENhcGUxEjAQBgNVBAcTCUNhcGUgVG93bjEdMBsGA1UEChMUVGhhd3RlIENv
-bnN1bHRpbmcgY2MxKDAmBgNVBAsTH0NlcnRpZmljYXRpb24gU2VydmljZXMgRGl2
-aXNpb24xGTAXBgNVBAMTEFRoYXd0ZSBTZXJ2ZXIgQ0ExJjAkBgkqhkiG9w0BCQEW
-F3NlcnZlci1jZXJ0c0B0aGF3dGUuY29tMIGfMA0GCSqGSIb3DQEBAQUAA4GNADCB
-iQKBgQDTpFBuyP9Wa+bPXbbqDGh1R6KqwtqEJfyo9EdR2oW1IHSUhh4PdcnpCGH1
-Bm0wbhUZAulSwGLbTZme4moMRDjN/r7jZAlwxf6xaym2L0nIO9QnBCUQly/nkG3A
-KEKZ10xD3sP1IW1Un13DWOHA5NlbsLjctHvfNjrCtWYiEtaHDQIDAQABMA0GCSqG
-SIb3DQEBBAUAA4GBAIsvn7ifX3RUIrvYXtpI4DOfARkTogwm6o7OwVdl93yFhDcX
-7h5t0XZ11MUAMziKdde3rmTvzUYIUCYoY5b032IwGMTvdiclK+STN6NP2m5nvFAM
-qJT5gC5O+j/jBuZRQ4i0AMYQr5F4lT8oBJnhgafw6PL8aDY2vMHGSPl9+7uf
------END CERTIFICATE-----
-
------BEGIN CERTIFICATE-----
-MIIDDTCCAnYCAQAwDQYJKoZIhvcNAQEEBQAwgc4xCzAJBgNVBAYTAlpBMRUwEwYD
-VQQIEwxXZXN0ZXJuIENhcGUxEjAQBgNVBAcTCUNhcGUgVG93bjEdMBsGA1UEChMU
-VGhhd3RlIENvbnN1bHRpbmcgY2MxKDAmBgNVBAsTH0NlcnRpZmljYXRpb24gU2Vy
-dmljZXMgRGl2aXNpb24xITAfBgNVBAMTGFRoYXd0ZSBQcmVtaXVtIFNlcnZlciBD
-QTEoMCYGCSqGSIb3DQEJARYZcHJlbWl1bS1zZXJ2ZXJAdGhhd3RlLmNvbTAeFw05
-NjA3MjcxODA3MTRaFw05ODA3MjcxODA3MTRaMIHOMQswCQYDVQQGEwJaQTEVMBMG
-A1UECBMMV2VzdGVybiBDYXBlMRIwEAYDVQQHEwlDYXBlIFRvd24xHTAbBgNVBAoT
-FFRoYXd0ZSBDb25zdWx0aW5nIGNjMSgwJgYDVQQLEx9DZXJ0aWZpY2F0aW9uIFNl
-cnZpY2VzIERpdmlzaW9uMSEwHwYDVQQDExhUaGF3dGUgUHJlbWl1bSBTZXJ2ZXIg
-Q0ExKDAmBgkqhkiG9w0BCQEWGXByZW1pdW0tc2VydmVyQHRoYXd0ZS5jb20wgZ8w
-DQYJKoZIhvcNAQEBBQADgY0AMIGJAoGBANI2NmqL18JbntqBQWKPOO5JBFXW0O8c
-G5UWR+8YSDU6UvQragaPOy/qVuOvho2eF/eetGV1Ak3vywmiIVHYm9Bn0LoNkgYU
-c9STy5cqAJxcTgy8+hVS/PJEbtoRSm4Iny8t4/mqOoZztkZTWMiJBb2DEbhzP6oH
-jfRCTedAnRw3AgMBAAEwDQYJKoZIhvcNAQEEBQADgYEAutFIgTRZVYerIZfL9lvR
-w9Eifvvo5KTZ3h+Bj+VzNnyw4Qc/IyXkPOu6SIiH9LQ3sCmWBdxpe+qr4l77rLj2
-GYuMtESFfn1XVALzkYgC7JcPuTOjMfIiMByt+uFf8AV8x0IW/Qkuv+hEQcyM9vxK
-3VZdLbCVIhNoEsysrxCpxcI=
------END CERTIFICATE-----
-Tims test GCI CA
-
------BEGIN CERTIFICATE-----
-MIIB8DCCAZoCAQAwDQYJKoZIhvcNAQEEBQAwgYIxCzAJBgNVBAYTAkFVMRMwEQYD
-VQQIEwpRdWVlbnNsYW5kMREwDwYDVQQHEwhCcmlzYmFuZTEaMBgGA1UEChMRQ3J5
-cHRTb2Z0IFB0eSBMdGQxFDASBgNVBAsTC2RldmVsb3BtZW50MRkwFwYDVQQDExBD
-cnlwdFNvZnQgRGV2IENBMB4XDTk3MDMyMjEzMzQwNFoXDTk4MDMyMjEzMzQwNFow
-gYIxCzAJBgNVBAYTAkFVMRMwEQYDVQQIEwpRdWVlbnNsYW5kMREwDwYDVQQHEwhC
-cmlzYmFuZTEaMBgGA1UEChMRQ3J5cHRTb2Z0IFB0eSBMdGQxFDASBgNVBAsTC2Rl
-dmVsb3BtZW50MRkwFwYDVQQDExBDcnlwdFNvZnQgRGV2IENBMFwwDQYJKoZIhvcN
-AQEBBQADSwAwSAJBAOAOAqogG5QwAmLhzyO4CoRnx/wVy4NZP4dxJy83O1EnL0rw
-OdsamJKvPOLHgSXo3gDu9uVyvCf/QJmZAmC5ml8CAwEAATANBgkqhkiG9w0BAQQF
-AANBADRRS/GVdd7rAqRW6SdmgLJduOU2yq3avBu99kRqbp9A/dLu6r6jU+eP4oOA
-TfdbFZtAAD2Hx9jUtY3tfdrJOb8= 
------END CERTIFICATE-----
-
------BEGIN CERTIFICATE-----
-MIICVjCCAgACAQAwDQYJKoZIhvcNAQEEBQAwgbUxCzAJBgNVBAYTAkFVMRMwEQYD
-VQQIEwpRdWVlbnNsYW5kMREwDwYDVQQHEwhCcmlzYmFuZTEaMBgGA1UEChMRQ3J5
-cHRTb2Z0IFB0eSBMdGQxLDAqBgNVBAsTI1dPUlRITEVTUyBDRVJUSUZJQ0FUSU9O
-IEFVVEhPUklUSUVTMTQwMgYDVQQDEytaRVJPIFZBTFVFIENBIC0gREVNT05TVFJB
-VElPTiBQVVJQT1NFUyBPTkxZMB4XDTk3MDQwMzEzMjI1NFoXDTk4MDQwMzEzMjI1
-NFowgbUxCzAJBgNVBAYTAkFVMRMwEQYDVQQIEwpRdWVlbnNsYW5kMREwDwYDVQQH
-EwhCcmlzYmFuZTEaMBgGA1UEChMRQ3J5cHRTb2Z0IFB0eSBMdGQxLDAqBgNVBAsT
-I1dPUlRITEVTUyBDRVJUSUZJQ0FUSU9OIEFVVEhPUklUSUVTMTQwMgYDVQQDEyta
-RVJPIFZBTFVFIENBIC0gREVNT05TVFJBVElPTiBQVVJQT1NFUyBPTkxZMFwwDQYJ
-KoZIhvcNAQEBBQADSwAwSAJBAOZ7T7yqP/tyspcko3yPY1y0Cm2EmwNvzW4QgVXR
-Fjs3HmJ4xtSpXdo6mwcGezL3Abt/aQXaxv9PU8xt+Jr0OFUCAwEAATANBgkqhkiG
-9w0BAQQFAANBAOQpYmGgyCqCy1OljgJhCqQOu627oVlHzK1L+t9vBaMfn40AVUR4
-WzQVWO31KTgi5vTK1U+3h46fgUWqQ0h+6rU=
------END CERTIFICATE-----
------BEGIN CERTIFICATE-----
-MIAwgKADAgECAgEAMA0GCSqGSIb3DQEBBAUAMGIxETAPBgNVBAcTCEludGVybmV0
-MRcwFQYDVQQKEw5WZXJpU2lnbiwgSW5jLjE0MDIGA1UECxMrVmVyaVNpZ24gQ2xh
-c3MgMSBDQSAtIEluZGl2aWR1YWwgU3Vic2NyaWJlcjAeFw05NjA0MDgxMDIwMjda
-Fw05NzA0MDgxMDIwMjdaMGIxETAPBgNVBAcTCEludGVybmV0MRcwFQYDVQQKEw5W
-ZXJpU2lnbiwgSW5jLjE0MDIGA1UECxMrVmVyaVNpZ24gQ2xhc3MgMSBDQSAtIElu
-ZGl2aWR1YWwgU3Vic2NyaWJlcjCAMA0GCSqGSIb3DQEBAQUAA4GNADCBiQKBgQC2
-FKbPTdAFDdjKI9BvqrQpkmOOLPhvltcunXZLEbE2jVfJw/0cxrr+Hgi6M8qV6r7j
-W80GqLd5HUQq7XPysVKDaBBwZJHXPmv5912dFEObbpdFmIFH0S3L3bty10w/cari
-QPJUObwW7s987LrbP2wqsxaxhhKdrpM01bjV0Pc+qQIDAQABAAAAADANBgkqhkiG
-9w0BAQQFAAOBgQA+1nJryNt8VBRjRr07ArDAV/3jAH7GjDc9jsrxZS68ost9v06C
-TvTNKGL+LISNmFLXl+JXhgGB0JZ9fvyYzNgHQ46HBUng1H6voalfJgS2KdEo50wW
-8EFZYMDkT1k4uynwJqkVN2QJK/2q4/A/VCov5h6SlM8Affg2W+1TLqvqkwAA
------END CERTIFICATE-----
-
- subject=/L=Internet/O=VeriSign, Inc./OU=VeriSign Class 2 CA - Individual Subscriber
- issuer= /L=Internet/O=VeriSign, Inc./OU=VeriSign Class 2 CA - Individual Subscriber
-
------BEGIN CERTIFICATE-----
-MIIEkzCCA/ygAwIBAgIRANDTUpSRL3nTFeMrMayFSPAwDQYJKoZIhvcNAQECBQAw
-YjERMA8GA1UEBxMISW50ZXJuZXQxFzAVBgNVBAoTDlZlcmlTaWduLCBJbmMuMTQw
-MgYDVQQLEytWZXJpU2lnbiBDbGFzcyAyIENBIC0gSW5kaXZpZHVhbCBTdWJzY3Jp
-YmVyMB4XDTk2MDYwNDAwMDAwMFoXDTk4MDYwNDIzNTk1OVowYjERMA8GA1UEBxMI
-SW50ZXJuZXQxFzAVBgNVBAoTDlZlcmlTaWduLCBJbmMuMTQwMgYDVQQLEytWZXJp
-U2lnbiBDbGFzcyAyIENBIC0gSW5kaXZpZHVhbCBTdWJzY3JpYmVyMIGfMA0GCSqG
-SIb3DQEBAQUAA4GNADCBiQKBgQC6A+2czKGRcYMfm8gdnk+0de99TDDzsqo0v5nb
-RsbUmMcdRQ7nsMbRWe0SAb/9QoLTZ/cJ0iOBqdrkz7UpqqKarVoTSdlSMVM92tWp
-3bJncZHQD1t4xd6lQVdI1/T6R+5J0T1ukOdsI9Jmf+F28S6g3R3L1SFwiHKeZKZv
-z+793wIDAQABo4ICRzCCAkMwggIpBgNVHQMBAf8EggIdMIICGTCCAhUwggIRBgtg
-hkgBhvhFAQcBATCCAgAWggGrVGhpcyBjZXJ0aWZpY2F0ZSBpbmNvcnBvcmF0ZXMg
-YnkgcmVmZXJlbmNlLCBhbmQgaXRzIHVzZSBpcyBzdHJpY3RseSBzdWJqZWN0IHRv
-LCB0aGUgVmVyaVNpZ24gQ2VydGlmaWNhdGlvbiBQcmFjdGljZSBTdGF0ZW1lbnQg
-KENQUyksIGF2YWlsYWJsZSBhdDogaHR0cHM6Ly93d3cudmVyaXNpZ24uY29tL0NQ
-Uy0xLjA7IGJ5IEUtbWFpbCBhdCBDUFMtcmVxdWVzdHNAdmVyaXNpZ24uY29tOyBv
-ciBieSBtYWlsIGF0IFZlcmlTaWduLCBJbmMuLCAyNTkzIENvYXN0IEF2ZS4sIE1v
-dW50YWluIFZpZXcsIENBIDk0MDQzIFVTQSBUZWwuICsxICg0MTUpIDk2MS04ODMw
-IENvcHlyaWdodCAoYykgMTk5NiBWZXJpU2lnbiwgSW5jLiAgQWxsIFJpZ2h0cyBS
-ZXNlcnZlZC4gQ0VSVEFJTiBXQVJSQU5USUVTIERJU0NMQUlNRUQgYW5kIExJQUJJ
-TElUWSBMSU1JVEVELqAOBgxghkgBhvhFAQcBAQGhDgYMYIZIAYb4RQEHAQECMC8w
-LRYraHR0cHM6Ly93d3cudmVyaXNpZ24uY29tL3JlcG9zaXRvcnkvQ1BTLTEuMDAU
-BglghkgBhvhCAQEBAf8EBAMCAgQwDQYJKoZIhvcNAQECBQADgYEApRJRkNBqLLgs
-53IR/d18ODdLOWMTZ+QOOxBrq460iBEdUwgF8vmPRX1ku7UiDeNzaLlurE6eFqHq
-2zPyK5j60zfTLVJMWKcQWwTJLjHtXrW8pxhNtFc6Fdvy5ZkHnC/9NIl7/t4U6WqB
-p4y+p7SdMIkEwIZfds0VbnQyX5MRUJY=
------END CERTIFICATE-----
-
- subject=/C=US/O=VeriSign, Inc./OU=Class 3 Public Primary Certification Authority
- issuer= /C=US/O=VeriSign, Inc./OU=Class 3 Public Primary Certification Authority
------BEGIN CERTIFICATE-----
-MIICMTCCAZoCBQKhAAABMA0GCSqGSIb3DQEBAgUAMF8xCzAJBgNVBAYTAlVTMRcw
-FQYDVQQKEw5WZXJpU2lnbiwgSW5jLjE3MDUGA1UECxMuQ2xhc3MgMyBQdWJsaWMg
-UHJpbWFyeSBDZXJ0aWZpY2F0aW9uIEF1dGhvcml0eTAeFw05NjAxMjkwMDAwMDBa
-Fw05OTEyMzEyMzU5NTlaMF8xCzAJBgNVBAYTAlVTMRcwFQYDVQQKEw5WZXJpU2ln
-biwgSW5jLjE3MDUGA1UECxMuQ2xhc3MgMyBQdWJsaWMgUHJpbWFyeSBDZXJ0aWZp
-Y2F0aW9uIEF1dGhvcml0eTCBnzANBgkqhkiG9w0BAQEFAAOBjQAwgYkCgYEAyVxZ
-nvIbigEUtBDfBEDb41evakVAj4QMC9Ez2dkRz+4CWB8l9yqoRAWq7AMfeH+ek7ma
-AKojfdashaJjRcdyJ8z0TMZ1cdI5709C8HXfCpDGjiBvmA/4rCNfcCk2pMmG57Ga
-IMtTpYXnPb59mv4kRTPcdhXtD6JxZExlLoFoRacCAwEAATANBgkqhkiG9w0BAQIF
-AAOBgQB1Zmw+0c2B27X4LzZRtvdCvM1Cr9wO+hVs+GeTVzrrtpLotgHKjLeOQ7RJ
-Zfk+7r11Ri7J/CVdqMcvi5uPaM+0nJcYwE3vH9mvgrPmZLiEXIqaB1JDYft0nls6
-NvxMsvwaPxUupVs8G5DsiCnkWRb5zget7Ond2tIxik/W2O8XjQ==
------END CERTIFICATE-----
- subject=/C=US/O=VeriSign, Inc./OU=Class 4 Public Primary Certification Authority
- issuer= /C=US/O=VeriSign, Inc./OU=Class 4 Public Primary Certification Authority
------BEGIN CERTIFICATE-----
-MIICMTCCAZoCBQKmAAABMA0GCSqGSIb3DQEBAgUAMF8xCzAJBgNVBAYTAlVTMRcw
-FQYDVQQKEw5WZXJpU2lnbiwgSW5jLjE3MDUGA1UECxMuQ2xhc3MgNCBQdWJsaWMg
-UHJpbWFyeSBDZXJ0aWZpY2F0aW9uIEF1dGhvcml0eTAeFw05NjAxMjkwMDAwMDBa
-Fw05OTEyMzEyMzU5NTlaMF8xCzAJBgNVBAYTAlVTMRcwFQYDVQQKEw5WZXJpU2ln
-biwgSW5jLjE3MDUGA1UECxMuQ2xhc3MgNCBQdWJsaWMgUHJpbWFyeSBDZXJ0aWZp
-Y2F0aW9uIEF1dGhvcml0eTCBnzANBgkqhkiG9w0BAQEFAAOBjQAwgYkCgYEA0LJ1
-9njQrlpQ9OlQqZ+M1++RlHDo0iSQdomF1t+s5gEXMoDwnZNHvJplnR+Xrr/phnVj
-IIm9gFidBAydqMEk6QvlMXi9/C0MN2qeeIDpRnX57aP7E3vIwUzSo+/1PLBij0pd
-O92VZ48TucE81qcmm+zDO3rZTbxtm+gVAePwR6kCAwEAATANBgkqhkiG9w0BAQIF
-AAOBgQBT3dPwnCR+QKri/AAa19oM/DJhuBUNlvP6Vxt/M3yv6ZiaYch6s7f/sdyZ
-g9ysEvxwyR84Qu1E9oAuW2szaayc01znX1oYx7EteQSWQZGZQbE8DbqEOcY7l/Am
-yY7uvcxClf8exwI/VAx49byqYHwCaejcrOICdmHEPgPq0ook0Q==
------END CERTIFICATE-----

apps/server2.pem

@@ -1,376 +1,52 @@
-issuer= /C=AU/ST=Queensland/O=CryptSoft Pty Ltd/CN=Test CA (1024 bit)
-subject=/C=AU/ST=Queensland/O=CryptSoft Pty Ltd/CN=Server test cert (1024 bit)
+subject= C = UK, O = OpenSSL Group, OU = FOR TESTING PURPOSES ONLY, CN = Test Server Cert #2
+issuer= C = UK, O = OpenSSL Group, OU = FOR TESTING PURPOSES ONLY, CN = OpenSSL Test Intermediate CA
 -----BEGIN CERTIFICATE-----
-MIICLjCCAZcCAQEwDQYJKoZIhvcNAQEEBQAwWzELMAkGA1UEBhMCQVUxEzARBgNV
-BAgTClF1ZWVuc2xhbmQxGjAYBgNVBAoTEUNyeXB0U29mdCBQdHkgTHRkMRswGQYD
-VQQDExJUZXN0IENBICgxMDI0IGJpdCkwHhcNOTcwNjA5MTM1NzU0WhcNOTgwNjA5
-MTM1NzU0WjBkMQswCQYDVQQGEwJBVTETMBEGA1UECBMKUXVlZW5zbGFuZDEaMBgG
-A1UEChMRQ3J5cHRTb2Z0IFB0eSBMdGQxJDAiBgNVBAMTG1NlcnZlciB0ZXN0IGNl
-cnQgKDEwMjQgYml0KTCBnzANBgkqhkiG9w0BAQEFAAOBjQAwgYkCgYEAsxH1PBPm
-RkxrR11eV4bzNi4N9n11CI8nV29+ARlT1+qDe/mjVUvXlmsr1v/vf71G9GgqopSa
-6RXrICLVdk/FYYYzhPvl1M+OrjaXDFO8BzBAF1Lnz6c7aRZvGRJNrRSr2nZEkqDf
-JW9dY7r2VZEpD5QeuaRYUnuECkqeieB65GMCAwEAATANBgkqhkiG9w0BAQQFAAOB
-gQCWsOta6C0wiVzXz8wPmJKyTrurMlgUss2iSuW9366iwofZddsNg7FXniMzkIf6
-dp7jnmWZwKZ9cXsNUS2o4OL07qOk2HOywC0YsNZQsOBu1CBTYYkIefDiKFL1zQHh
-8lwwNd4NP+OE3NzUNkCfh4DnFfg9WHkXUlD5UpxNRJ4gJA==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==
 -----END CERTIFICATE-----
 -----BEGIN RSA PRIVATE KEY-----
-MIICXgIBAAKBgQCzEfU8E+ZGTGtHXV5XhvM2Lg32fXUIjydXb34BGVPX6oN7+aNV
-S9eWayvW/+9/vUb0aCqilJrpFesgItV2T8VhhjOE++XUz46uNpcMU7wHMEAXUufP
-pztpFm8ZEk2tFKvadkSSoN8lb11juvZVkSkPlB65pFhSe4QKSp6J4HrkYwIDAQAB
-AoGBAKy8jvb0Lzby8q11yNLf7+78wCVdYi7ugMHcYA1JVFK8+zb1WfSm44FLQo/0
-dSChAjgz36TTexeLODPYxleJndjVcOMVzsLJjSM8dLpXsTS4FCeMbhw2s2u+xqKY
-bbPWfk+HOTyJjfnkcC5Nbg44eOmruq0gSmBeUXVM5UntlTnxAkEA7TGCA3h7kx5E
-Bl4zl2pc3gPAGt+dyfk5Po9mGJUUXhF5p2zueGmYWW74TmOWB1kzt4QRdYMzFePq
-zfDNXEa1CwJBAMFErdY0xp0UJ13WwBbUTk8rujqQdHtjw0klhpbuKkjxu2hN0wwM
-6p0D9qxF7JHaghqVRI0fAW/EE0OzdHMR9QkCQQDNR26dMFXKsoPu+vItljj/UEGf
-QG7gERiQ4yxaFBPHgdpGo0kT31eh9x9hQGDkxTe0GNG/YSgCRvm8+C3TMcKXAkBD
-dhGn36wkUFCddMSAM4NSJ1VN8/Z0y5HzCmI8dM3VwGtGMUQlxKxwOl30LEQzdS5M
-0SWojNYXiT2gOBfBwtbhAkEAhafl5QEOIgUz+XazS/IlZ8goNKdDVfYgK3mHHjvv
-nY5G+AuGebdNkXJr4KSWxDcN+C2i47zuj4QXA16MAOandA==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 -----END RSA PRIVATE KEY-----
-subject=/C=US/O=AT&T Bell Laboratories/OU=Prototype Research CA
-issuer= /C=US/O=AT&T Bell Laboratories/OU=Prototype Research CA
-notBefore=950413210656Z
-notAfter =970412210656Z
------BEGIN X509 CERTIFICATE-----
-
-MIICCDCCAXECAQAwDQYJKoZIhvcNAQEEBQAwTjELMAkGA1UEBhMCVVMxHzAdBgNV
-BAoUFkFUJlQgQmVsbCBMYWJvcmF0b3JpZXMxHjAcBgNVBAsUFVByb3RvdHlwZSBS
-ZXNlYXJjaCBDQTAeFw05NTA0MTMyMTA2NTZaFw05NzA0MTIyMTA2NTZaME4xCzAJ
-BgNVBAYTAlVTMR8wHQYDVQQKFBZBVCZUIEJlbGwgTGFib3JhdG9yaWVzMR4wHAYD
-VQQLFBVQcm90b3R5cGUgUmVzZWFyY2ggQ0EwgZwwDQYJKoZIhvcNAQEBBQADgYoA
-MIGGAoGAebOmgtSCl+wCYZc86UGYeTLY8cjmW2P0FN8ToT/u2pECCoFdrlycX0OR
-3wt0ZhpFXLVNeDnHwEE9veNUih7pCL2ZBFqoIoQkB1lZmXRiVtjGonz8BLm/qrFM
-YHb0lme/Ol+s118mwKVxnn6bSAeI/OXKhLaVdYZWk+aEaxEDkVkCAQ8wDQYJKoZI
-hvcNAQEEBQADgYEAAZMG14lZmZ8bahkaHaTV9dQf4p2FZiQTFwHP9ZyGsXPC+LT5
-dG5iTaRmyjNIJdPWohZDl97kAci79aBndvuEvRKOjLHs3WRGBIwERnAcnY9Mz8u/
-zIHK23PjYVxGGaZd669OJwD0CYyqH22HH9nFUGaoJdsv39ChW0NRdLE9+y8=
------END X509 CERTIFICATE-----
-issuer= /C=AU/ST=Queensland/O=CryptSoft Pty Ltd/CN=Test PCA (1024 bit)
-subject=/C=AU/ST=Queensland/O=CryptSoft Pty Ltd/CN=Test CA (1024 bit)
------BEGIN CERTIFICATE-----
-MIICJjCCAY8CAQAwDQYJKoZIhvcNAQEEBQAwXDELMAkGA1UEBhMCQVUxEzARBgNV
-BAgTClF1ZWVuc2xhbmQxGjAYBgNVBAoTEUNyeXB0U29mdCBQdHkgTHRkMRwwGgYD
-VQQDExNUZXN0IFBDQSAoMTAyNCBiaXQpMB4XDTk3MDYwOTEzNTc0M1oXDTAxMDYw
-OTEzNTc0M1owWzELMAkGA1UEBhMCQVUxEzARBgNVBAgTClF1ZWVuc2xhbmQxGjAY
-BgNVBAoTEUNyeXB0U29mdCBQdHkgTHRkMRswGQYDVQQDExJUZXN0IENBICgxMDI0
-IGJpdCkwgZ8wDQYJKoZIhvcNAQEBBQADgY0AMIGJAoGBAKO7o8t116VP6cgybTsZ
-DCZhr95nYlZuya3aCi1IKoztqwWnjbmDFIriOqGFPrZQ+moMETC9D59iRW/dFXSv
-1F65ka/XY2hLh9exCCo7XuUcDs53Qp3bI3AmMqHjgzE8oO3ajyJAzJkTTOUecQU2
-mw/gI4tMM0LqWMQS7luTy4+xAgMBAAEwDQYJKoZIhvcNAQEEBQADgYEAM7achv3v
-hLQJcv/65eGEpBXM40ZDVoFQFFJWaY5p883HTqLB1x4FdzsXHH0QKBTcKpWwqyu4
-YDm3fb8oDugw72bCzfyZK/zVZPR/hVlqI/fvU109Qoc+7oPvIXWky71HfcK6ZBCA
-q30KIqGM/uoM60INq97qjDmCJapagcNBGQs=
------END CERTIFICATE-----
------BEGIN RSA PRIVATE KEY-----
-MIICXQIBAAKBgQCju6PLddelT+nIMm07GQwmYa/eZ2JWbsmt2gotSCqM7asFp425
-gxSK4jqhhT62UPpqDBEwvQ+fYkVv3RV0r9ReuZGv12NoS4fXsQgqO17lHA7Od0Kd
-2yNwJjKh44MxPKDt2o8iQMyZE0zlHnEFNpsP4COLTDNC6ljEEu5bk8uPsQIDAQAB
-AoGAVZmpFZsDZfr0l2S9tLLwpjRWNOlKATQkno6q2WesT0eGLQufTciY+c8ypfU6
-hyio8r5iUl/VhhdjhAtKx1mRpiotftHo/eYf8rtsrnprOnWG0bWjLjtIoMbcxGn2
-J3bN6LJmbJMjDs0eJ3KnTu646F3nDUw2oGAwmpzKXA1KAP0CQQDRvQhxk2D3Pehs
-HvG665u2pB5ipYQngEFlZO7RHJZzJOZEWSLuuMqaF/7pTfA5jiBvWqCgJeCRRInL
-21ru4dlPAkEAx9jj7BgKn5TYnMoBSSe0afjsV9oApVpN1Nacb1YDtCwy+scp3++s
-nFxlv98wxIlSdpwMUn+AUWfjiWR7Tu/G/wJBAJ/KjwZIrFVxewP0x2ILYsTRYLzz
-MS4PDsO7FB+I0i7DbBOifXS2oNSpd3I0CNMwrxFnUHzynpbOStVfN3ZL5w0CQQCa
-pwFahxBRhkJKsxhjoFJBX9yl75JoY4Wvm5Tbo9ih6UJaRx3kqfkN14L2BKYcsZgb
-KY9vmDOYy6iNfjDeWTfJAkBkfPUb8oTJ/nSP5zN6sqGxSY4krc4xLxpRmxoJ8HL2
-XfhqXkTzbU13RX9JJ/NZ8vQN9Vm2NhxRGJocQkmcdVtJ
------END RSA PRIVATE KEY-----
------BEGIN X509 CERTIFICATE-----
-MIICYDCCAiACAgEoMAkGBSsOAwINBQAwfDELMAkGA1UEBhMCVVMxNjA0BgNVBAoT
-LU5hdGlvbmFsIEFlcm9uYXV0aWNzIGFuZCBTcGFjZSBBZG1pbmlzdHJhdGlvbjEZ
-MBcGA1UECxMQVGVzdCBFbnZpcm9ubWVudDEaMBgGA1UECxMRRFNTLU5BU0EtUGls
-b3QtQ0EwHhcNOTYwMjI2MTYzMjQ1WhcNOTcwMjI1MTYzMjQ1WjB8MQswCQYDVQQG
-EwJVUzE2MDQGA1UEChMtTmF0aW9uYWwgQWVyb25hdXRpY3MgYW5kIFNwYWNlIEFk
-bWluaXN0cmF0aW9uMRkwFwYDVQQLExBUZXN0IEVudmlyb25tZW50MRowGAYDVQQL
-ExFEU1MtTkFTQS1QaWxvdC1DQTCB8jAJBgUrDgMCDAUAA4HkADCB4AJBAMA/ssKb
-hPNUG7ZlASfVwEJU21O5OyF/iyBzgHI1O8eOhJGUYO8cc8wDMjR508Mr9cp6Uhl/
-ZB7FV5GkLNEnRHYCQQDUEaSg45P2qrDwixTRhFhmWz5Nvc4lRFQ/42XPcchiJBLb
-bn3QK74T2IxY1yY+kCNq8XrIqf5fJJzIH0J/xUP3AhUAsg2wsQHfDGYk/BOSulX3
-fVd0geUCQQCzCFUQAh+ZkEmp5804cs6ZWBhrUAfnra8lJItYo9xPcXgdIfLfibcX
-R71UsyO77MRD7B0+Ag2tq794IleCVcEEMAkGBSsOAwINBQADLwAwLAIUUayDfreR
-Yh2WeU86/pHNdkUC1IgCFEfxe1f0oMpxJyrJ5XIxTi7vGdoK
------END X509 CERTIFICATE-----
------BEGIN X509 CERTIFICATE-----
-
-MIICGTCCAdgCAwCqTDAJBgUrDgMCDQUAMHwxCzAJBgNVBAYTAlVTMTYwNAYDVQQK
-Ey1OYXRpb25hbCBBZXJvbmF1dGljcyBhbmQgU3BhY2UgQWRtaW5pc3RyYXRpb24x
-GTAXBgNVBAsTEFRlc3QgRW52aXJvbm1lbnQxGjAYBgNVBAsTEURTUy1OQVNBLVBp
-bG90LUNBMB4XDTk2MDUxNDE3MDE0MVoXDTk3MDUxNDE3MDE0MVowMzELMAkGA1UE
-BhMCQVUxDzANBgNVBAoTBk1pbmNvbTETMBEGA1UEAxMKRXJpYyBZb3VuZzCB8jAJ
-BgUrDgMCDAUAA4HkADCB4AJBAKbfHz6vE6pXXMTpswtGUec2tvnfLJUsoxE9qs4+
-ObZX7LmLvragNPUeiTJx7UOWZ5DfBj6bXLc8eYne0lP1g3ACQQDUEaSg45P2qrDw
-ixTRhFhmWz5Nvc4lRFQ/42XPcchiJBLbbn3QK74T2IxY1yY+kCNq8XrIqf5fJJzI
-H0J/xUP3AhUAsg2wsQHfDGYk/BOSulX3fVd0geUCQQCzCFUQAh+ZkEmp5804cs6Z
-WBhrUAfnra8lJItYo9xPcXgdIfLfibcXR71UsyO77MRD7B0+Ag2tq794IleCVcEE
-MAkGBSsOAwINBQADMAAwLQIUWsuuJRE3VT4ueWkWMAJMJaZjj1ECFQCYY0zX4bzM
-LC7obsrHD8XAHG+ZRG==
------END X509 CERTIFICATE-----
------BEGIN CERTIFICATE-----
-MIICTTCCAbagAwIBAgIBADANBgkqhkiG9w0BAQQFADBMMQswCQYDVQQGEwJHQjEM
-MAoGA1UEChMDVUNMMRgwFgYDVQQLEw9JQ0UtVEVMIFByb2plY3QxFTATBgNVBAMT
-DFRydXN0RmFjdG9yeTAeFw05NzA0MjIxNDM5MTRaFw05ODA0MjIxNDM5MTRaMEwx
-CzAJBgNVBAYTAkdCMQwwCgYDVQQKEwNVQ0wxGDAWBgNVBAsTD0lDRS1URUwgUHJv
-amVjdDEVMBMGA1UEAxMMVHJ1c3RGYWN0b3J5MIGcMAoGBFUIAQECAgQAA4GNADCB
-iQKBgQCEieR8NcXkUW1f0G6aC6u0i8q/98JqS6RxK5YmHIGKCkuTWAUjzLfUa4dt
-U9igGCjTuxaDqlzEim+t/02pmiBZT9HaX++35MjQPUWmsChcYU5WyzGErXi+rQaw
-zlwS73zM8qiPj/97lXYycWhgL0VaiDSPxRXEUdWoaGruom4mNQIDAQABo0IwQDAd
-BgNVHQ4EFgQUHal1LZr7oVg5z6lYzrhTgZRCmcUwDgYDVR0PAQH/BAQDAgH2MA8G
-A1UdEwEB/wQFMAMBAf8wDQYJKoZIhvcNAQEEBQADgYEAfaggfl6FZoioecjv0dq8
-/DXo/u11iMZvXn08gjX/zl2b4wtPbShOSY5FhkSm8GeySasz+/Nwb/uzfnIhokWi
-lfPZHtlCWtXbIy/TN51eJyq04ceDCQDWvLC2enVg9KB+GJ34b5c5VaPRzq8MBxsA
-S7ELuYGtmYgYm9NZOIr7yU0=
------END CERTIFICATE-----
------BEGIN CERTIFICATE-----
-MIIB6jCCAZQCAgEtMA0GCSqGSIb3DQEBBAUAMIGAMQswCQYDVQQGEwJVUzE2MDQG
-A1UEChMtTmF0aW9uYWwgQWVyb25hdXRpY3MgYW5kIFNwYWNlIEFkbWluaXN0cmF0
-aW9uMRkwFwYDVQQLExBUZXN0IEVudmlyb25tZW50MR4wHAYDVQQLExVNRDUtUlNB
-LU5BU0EtUGlsb3QtQ0EwHhcNOTYwNDMwMjIwNTAwWhcNOTcwNDMwMjIwNTAwWjCB
-gDELMAkGA1UEBhMCVVMxNjA0BgNVBAoTLU5hdGlvbmFsIEFlcm9uYXV0aWNzIGFu
-ZCBTcGFjZSBBZG1pbmlzdHJhdGlvbjEZMBcGA1UECxMQVGVzdCBFbnZpcm9ubWVu
-dDEeMBwGA1UECxMVTUQ1LVJTQS1OQVNBLVBpbG90LUNBMFkwCgYEVQgBAQICAgAD
-SwAwSAJBALmmX5+GqAvcrWK13rfDrNX9UfeA7f+ijyBgeFQjYUoDpFqapw4nzQBL
-bAXug8pKkRwa2Zh8YODhXsRWu2F/UckCAwEAATANBgkqhkiG9w0BAQQFAANBAH9a
-OBA+QCsjxXgnSqHx04gcU8S49DVUb1f2XVoLnHlIb8RnX0k5O6mpHT5eti9bLkiW
-GJNMJ4L0AJ/ac+SmHZc=
------END CERTIFICATE-----
------BEGIN CERTIFICATE-----
-MIICajCCAdMCBDGA0QUwDQYJKoZIhvcNAQEEBQAwfTELMAkGA1UEBhMCQ2ExDzAN
-BgNVBAcTBk5lcGVhbjEeMBwGA1UECxMVTm8gTGlhYmlsaXR5IEFjY2VwdGVkMR8w
-HQYDVQQKExZGb3IgRGVtbyBQdXJwb3NlcyBPbmx5MRwwGgYDVQQDExNFbnRydXN0
-IERlbW8gV2ViIENBMB4XDTk2MDQyNjEzMzUwMVoXDTA2MDQyNjEzMzUwMVowfTEL
-MAkGA1UEBhMCQ2ExDzANBgNVBAcTBk5lcGVhbjEeMBwGA1UECxMVTm8gTGlhYmls
-aXR5IEFjY2VwdGVkMR8wHQYDVQQKExZGb3IgRGVtbyBQdXJwb3NlcyBPbmx5MRww
-GgYDVQQDExNFbnRydXN0IERlbW8gV2ViIENBMIGdMA0GCSqGSIb3DQEBAQUAA4GL
-ADCBhwKBgQCaroS7O1DA0hm4IefNYU1cx/nqOmzEnk291d1XqznDeF4wEgakbkCc
-zTKxK791yNpXG5RmngqH7cygDRTHZJ6mfCRn0wGC+AI00F2vYTGqPGRQL1N3lZT0
-YDKFC0SQeMMjFIZ1aeQigroFQnHo0VB3zWIMpNkka8PY9lxHZAmWwQIBAzANBgkq
-hkiG9w0BAQQFAAOBgQBAx0UMVA1s54lMQyXjMX5kj99FJN5itb8bK1Rk+cegPQPF
-cWO9SEWyEjjBjIkjjzAwBkaEszFsNGxemxtXvwjIm1xEUMTVlPEWTs2qnDvAUA9W
-YqhWbhH0toGT36236QAsqCZ76rbTRVSSX2BHyJwJMG2tCRv7kRJ//NIgxj3H4w==
------END CERTIFICATE-----
-
-issuer= /C=AU/ST=Queensland/O=CryptSoft Pty Ltd/CN=Test PCA (1024 bit)
-subject=/C=AU/ST=Queensland/O=CryptSoft Pty Ltd/CN=Test PCA (1024 bit)
------BEGIN CERTIFICATE-----
-MIICJzCCAZACAQAwDQYJKoZIhvcNAQEEBQAwXDELMAkGA1UEBhMCQVUxEzARBgNV
-BAgTClF1ZWVuc2xhbmQxGjAYBgNVBAoTEUNyeXB0U29mdCBQdHkgTHRkMRwwGgYD
-VQQDExNUZXN0IFBDQSAoMTAyNCBiaXQpMB4XDTk3MDYwOTEzNTczN1oXDTAxMDYw
-OTEzNTczN1owXDELMAkGA1UEBhMCQVUxEzARBgNVBAgTClF1ZWVuc2xhbmQxGjAY
-BgNVBAoTEUNyeXB0U29mdCBQdHkgTHRkMRwwGgYDVQQDExNUZXN0IFBDQSAoMTAy
-NCBiaXQpMIGfMA0GCSqGSIb3DQEBAQUAA4GNADCBiQKBgQCdoWk/3+WcMlfjIrkg
-40ketmnQaEogQe1LLcuOJV6rKfUSAsPgwgsabJ/wn8TxA1yy3eKJbFl3OiUXMRsp
-22Jp85PmemiDzyUIStwk72qhp1imbANZvlmlCFKiQrjUyuDfu4TABmn+kkt3vR1Y
-BEOGt+IFye1UBVSATVdRJ2UVhwIDAQABMA0GCSqGSIb3DQEBBAUAA4GBABNA1u/S
-Cg/LJZWb7GliiKJsvuhxlE4E5JxQF2zMub/CSNbF97//tYSyj96sxeFQxZXbcjm9
-xt6mr/xNLA4szNQMJ4P+L7b5e/jC5DSqlwS+CUYJgaFs/SP+qJoCSu1bR3IM9XWO
-cRBpDmcBbYLkSyB92WURvsZ1LtjEcn+cdQVI
------END CERTIFICATE-----
------BEGIN RSA PRIVATE KEY-----
-MIICXAIBAAKBgQCdoWk/3+WcMlfjIrkg40ketmnQaEogQe1LLcuOJV6rKfUSAsPg
-wgsabJ/wn8TxA1yy3eKJbFl3OiUXMRsp22Jp85PmemiDzyUIStwk72qhp1imbANZ
-vlmlCFKiQrjUyuDfu4TABmn+kkt3vR1YBEOGt+IFye1UBVSATVdRJ2UVhwIDAQAB
-AoGAba4fTtuap5l7/8ZsbE7Z1O32KJY4ZcOZukLOLUUhXxXduT+FTgGWujc0/rgc
-z9qYCLlNZHOouMYTgtSfYvuMuLZ11VIt0GYH+nRioLShE59Yy+zCRyC+gPigS1kz
-xvo14AsOIPYV14Tk/SsHyq6E0eTk7VzaIE197giiINUERPECQQDSKmtPTh/lRKw7
-HSZSM0I1mFWn/1zqrAbontRQY5w98QWIOe5qmzYyFbPXYT3d9BzlsMyhgiRNoBbD
-yvohSHXJAkEAwAHx6ezAZeWWzD5yXD36nyjpkVCw7Tk7TSmOceLJMWt1QcrCfqlS
-xA5jjpQ6Z8suU5DdtWAryM2sAir1WisYzwJAd6Zcx56jvAQ3xcPXsE6scBTVFzrj
-7FqZ6E+cclPzfLQ+QQsyOBE7bpI6e/FJppY26XGZXo3YGzV8IGXrt40oOQJALETG
-h86EFXo3qGOFbmsDy4pdP5nBERCu8X1xUCSfintiD4c2DInxgS5oGclnJeMcjTvL
-QjQoJCX3UJCi/OUO1QJBAKgcDHWjMvt+l1pjJBsSEZ0HX9AAIIVx0RQmbFGS+F2Q
-hhu5l77WnnZOQ9vvhV5u7NPCUF9nhU3jh60qWWO8mkc=
------END RSA PRIVATE KEY-----
-subject=/C=US/O=RSA Data Security, Inc./OU=Commercial Certification Authority
-issuer= /C=US/O=RSA Data Security, Inc./OU=Commercial Certification Authority
-notBefore=941104185834Z
-notAfter =991103185834Z
------BEGIN X509 CERTIFICATE-----
-
-MIICIzCCAZACBQJBAAAWMA0GCSqGSIb3DQEBAgUAMFwxCzAJBgNVBAYTAlVTMSAw
-HgYDVQQKExdSU0EgRGF0YSBTZWN1cml0eSwgSW5jLjErMCkGA1UECxMiQ29tbWVy
-Y2lhbCBDZXJ0aWZpY2F0aW9uIEF1dGhvcml0eTAeFw05NDExMDQxODU4MzRaFw05
-OTExMDMxODU4MzRaMFwxCzAJBgNVBAYTAlVTMSAwHgYDVQQKExdSU0EgRGF0YSBT
-ZWN1cml0eSwgSW5jLjErMCkGA1UECxMiQ29tbWVyY2lhbCBDZXJ0aWZpY2F0aW9u
-IEF1dGhvcml0eTCBmzANBgkqhkiG9w0BAQEFAAOBiQAwgYUCfgCk+4Fie84QJ93o
-975sbsZwmdu41QUDaSiCnHJ/lj+O7Kwpkj+KFPhCdr69XQO5kNTQvAayUTNfxMK/
-touPmbZiImDd298ggrTKoi8tUO2UMt7gVY3UaOLgTNLNBRYulWZcYVI4HlGogqHE
-7yXpCuaLK44xZtn42f29O2nZ6wIDAQABMA0GCSqGSIb3DQEBAgUAA34AdrW2EP4j
-9/dZYkuwX5zBaLxJu7NJbyFHXSudVMQAKD+YufKKg5tgf+tQx6sFEC097TgCwaVI
-0v5loMC86qYjFmZsGySp8+x5NRhPJsjjr1BKx6cxa9B8GJ1Qv6km+iYrRpwUqbtb
-MJhCKLVLU7tDCZJAuqiqWqTGtotXTcU=
------END X509 CERTIFICATE-----
-subject=/C=US/O=RSA Data Security, Inc./OU=Secure Server Certification Authority
-issuer= /C=US/O=RSA Data Security, Inc./OU=Secure Server Certification Authority
-notBefore=941109235417Z
-notAfter =991231235417Z
------BEGIN X509 CERTIFICATE-----
-
-MIICKTCCAZYCBQJBAAABMA0GCSqGSIb3DQEBAgUAMF8xCzAJBgNVBAYTAlVTMSAw
-HgYDVQQKExdSU0EgRGF0YSBTZWN1cml0eSwgSW5jLjEuMCwGA1UECxMlU2VjdXJl
-IFNlcnZlciBDZXJ0aWZpY2F0aW9uIEF1dGhvcml0eTAeFw05NDExMDkyMzU0MTda
-Fw05OTEyMzEyMzU0MTdaMF8xCzAJBgNVBAYTAlVTMSAwHgYDVQQKExdSU0EgRGF0
-YSBTZWN1cml0eSwgSW5jLjEuMCwGA1UECxMlU2VjdXJlIFNlcnZlciBDZXJ0aWZp
-Y2F0aW9uIEF1dGhvcml0eTCBmzANBgkqhkiG9w0BAQEFAAOBiQAwgYUCfgCSznrB
-roM+WqqJg1esJQF2DK2ujiw3zus1eGRUA+WEQFHJv48I4oqCCNIWhjdV6bEhAq12
-aIGaBaJLyUslZiJWbIgHj/eBWW2EB2VwE3F2Ppt3TONQiVaYSLkdpykaEy5KEVmc
-HhXVSVQsczppgrGXOZxtcGdI5d0t1sgeewIDAQABMA0GCSqGSIb3DQEBAgUAA34A
-iNHReSHO4ovo+MF9NFM/YYPZtgs4F7boviGNjwC4i1N+RGceIr2XJ+CchcxK9oU7
-suK+ktPlDemvXA4MRpX/oRxePug2WHpzpgr4IhFrwwk4fia7c+8AvQKk8xQNMD9h
-cHsg/jKjn7P0Z1LctO6EjJY2IN6BCINxIYoPnqk=
------END X509 CERTIFICATE-----
-subject=/C=ZA/SP=Western Cape/L=Cape Town/O=Thawte Consulting cc
-	/OU=Certification Services Division/CN=Thawte Server CA
-	/Email=server-certs@thawte.com
-issuer= /C=ZA/SP=Western Cape/L=Cape Town/O=Thawte Consulting cc
-	/OU=Certification Services Division/CN=Thawte Server CA
-	/Email=server-certs@thawte.com
------BEGIN CERTIFICATE-----
-MIIC+TCCAmICAQAwDQYJKoZIhvcNAQEEBQAwgcQxCzAJBgNVBAYTAlpBMRUwEwYD
-VQQIEwxXZXN0ZXJuIENhcGUxEjAQBgNVBAcTCUNhcGUgVG93bjEdMBsGA1UEChMU
-VGhhd3RlIENvbnN1bHRpbmcgY2MxKDAmBgNVBAsTH0NlcnRpZmljYXRpb24gU2Vy
-dmljZXMgRGl2aXNpb24xGTAXBgNVBAMTEFRoYXd0ZSBTZXJ2ZXIgQ0ExJjAkBgkq
-hkiG9w0BCQEWF3NlcnZlci1jZXJ0c0B0aGF3dGUuY29tMB4XDTk2MDcyNzE4MDc1
-N1oXDTk4MDcyNzE4MDc1N1owgcQxCzAJBgNVBAYTAlpBMRUwEwYDVQQIEwxXZXN0
-ZXJuIENhcGUxEjAQBgNVBAcTCUNhcGUgVG93bjEdMBsGA1UEChMUVGhhd3RlIENv
-bnN1bHRpbmcgY2MxKDAmBgNVBAsTH0NlcnRpZmljYXRpb24gU2VydmljZXMgRGl2
-aXNpb24xGTAXBgNVBAMTEFRoYXd0ZSBTZXJ2ZXIgQ0ExJjAkBgkqhkiG9w0BCQEW
-F3NlcnZlci1jZXJ0c0B0aGF3dGUuY29tMIGfMA0GCSqGSIb3DQEBAQUAA4GNADCB
-iQKBgQDTpFBuyP9Wa+bPXbbqDGh1R6KqwtqEJfyo9EdR2oW1IHSUhh4PdcnpCGH1
-Bm0wbhUZAulSwGLbTZme4moMRDjN/r7jZAlwxf6xaym2L0nIO9QnBCUQly/nkG3A
-KEKZ10xD3sP1IW1Un13DWOHA5NlbsLjctHvfNjrCtWYiEtaHDQIDAQABMA0GCSqG
-SIb3DQEBBAUAA4GBAIsvn7ifX3RUIrvYXtpI4DOfARkTogwm6o7OwVdl93yFhDcX
-7h5t0XZ11MUAMziKdde3rmTvzUYIUCYoY5b032IwGMTvdiclK+STN6NP2m5nvFAM
-qJT5gC5O+j/jBuZRQ4i0AMYQr5F4lT8oBJnhgafw6PL8aDY2vMHGSPl9+7uf
------END CERTIFICATE-----
-
------BEGIN CERTIFICATE-----
-MIIDDTCCAnYCAQAwDQYJKoZIhvcNAQEEBQAwgc4xCzAJBgNVBAYTAlpBMRUwEwYD
-VQQIEwxXZXN0ZXJuIENhcGUxEjAQBgNVBAcTCUNhcGUgVG93bjEdMBsGA1UEChMU
-VGhhd3RlIENvbnN1bHRpbmcgY2MxKDAmBgNVBAsTH0NlcnRpZmljYXRpb24gU2Vy
-dmljZXMgRGl2aXNpb24xITAfBgNVBAMTGFRoYXd0ZSBQcmVtaXVtIFNlcnZlciBD
-QTEoMCYGCSqGSIb3DQEJARYZcHJlbWl1bS1zZXJ2ZXJAdGhhd3RlLmNvbTAeFw05
-NjA3MjcxODA3MTRaFw05ODA3MjcxODA3MTRaMIHOMQswCQYDVQQGEwJaQTEVMBMG
-A1UECBMMV2VzdGVybiBDYXBlMRIwEAYDVQQHEwlDYXBlIFRvd24xHTAbBgNVBAoT
-FFRoYXd0ZSBDb25zdWx0aW5nIGNjMSgwJgYDVQQLEx9DZXJ0aWZpY2F0aW9uIFNl
-cnZpY2VzIERpdmlzaW9uMSEwHwYDVQQDExhUaGF3dGUgUHJlbWl1bSBTZXJ2ZXIg
-Q0ExKDAmBgkqhkiG9w0BCQEWGXByZW1pdW0tc2VydmVyQHRoYXd0ZS5jb20wgZ8w
-DQYJKoZIhvcNAQEBBQADgY0AMIGJAoGBANI2NmqL18JbntqBQWKPOO5JBFXW0O8c
-G5UWR+8YSDU6UvQragaPOy/qVuOvho2eF/eetGV1Ak3vywmiIVHYm9Bn0LoNkgYU
-c9STy5cqAJxcTgy8+hVS/PJEbtoRSm4Iny8t4/mqOoZztkZTWMiJBb2DEbhzP6oH
-jfRCTedAnRw3AgMBAAEwDQYJKoZIhvcNAQEEBQADgYEAutFIgTRZVYerIZfL9lvR
-w9Eifvvo5KTZ3h+Bj+VzNnyw4Qc/IyXkPOu6SIiH9LQ3sCmWBdxpe+qr4l77rLj2
-GYuMtESFfn1XVALzkYgC7JcPuTOjMfIiMByt+uFf8AV8x0IW/Qkuv+hEQcyM9vxK
-3VZdLbCVIhNoEsysrxCpxcI=
------END CERTIFICATE-----
-Tims test GCI CA
-
------BEGIN CERTIFICATE-----
-MIIB8DCCAZoCAQAwDQYJKoZIhvcNAQEEBQAwgYIxCzAJBgNVBAYTAkFVMRMwEQYD
-VQQIEwpRdWVlbnNsYW5kMREwDwYDVQQHEwhCcmlzYmFuZTEaMBgGA1UEChMRQ3J5
-cHRTb2Z0IFB0eSBMdGQxFDASBgNVBAsTC2RldmVsb3BtZW50MRkwFwYDVQQDExBD
-cnlwdFNvZnQgRGV2IENBMB4XDTk3MDMyMjEzMzQwNFoXDTk4MDMyMjEzMzQwNFow
-gYIxCzAJBgNVBAYTAkFVMRMwEQYDVQQIEwpRdWVlbnNsYW5kMREwDwYDVQQHEwhC
-cmlzYmFuZTEaMBgGA1UEChMRQ3J5cHRTb2Z0IFB0eSBMdGQxFDASBgNVBAsTC2Rl
-dmVsb3BtZW50MRkwFwYDVQQDExBDcnlwdFNvZnQgRGV2IENBMFwwDQYJKoZIhvcN
-AQEBBQADSwAwSAJBAOAOAqogG5QwAmLhzyO4CoRnx/wVy4NZP4dxJy83O1EnL0rw
-OdsamJKvPOLHgSXo3gDu9uVyvCf/QJmZAmC5ml8CAwEAATANBgkqhkiG9w0BAQQF
-AANBADRRS/GVdd7rAqRW6SdmgLJduOU2yq3avBu99kRqbp9A/dLu6r6jU+eP4oOA
-TfdbFZtAAD2Hx9jUtY3tfdrJOb8= 
------END CERTIFICATE-----
-
------BEGIN CERTIFICATE-----
-MIICVjCCAgACAQAwDQYJKoZIhvcNAQEEBQAwgbUxCzAJBgNVBAYTAkFVMRMwEQYD
-VQQIEwpRdWVlbnNsYW5kMREwDwYDVQQHEwhCcmlzYmFuZTEaMBgGA1UEChMRQ3J5
-cHRTb2Z0IFB0eSBMdGQxLDAqBgNVBAsTI1dPUlRITEVTUyBDRVJUSUZJQ0FUSU9O
-IEFVVEhPUklUSUVTMTQwMgYDVQQDEytaRVJPIFZBTFVFIENBIC0gREVNT05TVFJB
-VElPTiBQVVJQT1NFUyBPTkxZMB4XDTk3MDQwMzEzMjI1NFoXDTk4MDQwMzEzMjI1
-NFowgbUxCzAJBgNVBAYTAkFVMRMwEQYDVQQIEwpRdWVlbnNsYW5kMREwDwYDVQQH
-EwhCcmlzYmFuZTEaMBgGA1UEChMRQ3J5cHRTb2Z0IFB0eSBMdGQxLDAqBgNVBAsT
-I1dPUlRITEVTUyBDRVJUSUZJQ0FUSU9OIEFVVEhPUklUSUVTMTQwMgYDVQQDEyta
-RVJPIFZBTFVFIENBIC0gREVNT05TVFJBVElPTiBQVVJQT1NFUyBPTkxZMFwwDQYJ
-KoZIhvcNAQEBBQADSwAwSAJBAOZ7T7yqP/tyspcko3yPY1y0Cm2EmwNvzW4QgVXR
-Fjs3HmJ4xtSpXdo6mwcGezL3Abt/aQXaxv9PU8xt+Jr0OFUCAwEAATANBgkqhkiG
-9w0BAQQFAANBAOQpYmGgyCqCy1OljgJhCqQOu627oVlHzK1L+t9vBaMfn40AVUR4
-WzQVWO31KTgi5vTK1U+3h46fgUWqQ0h+6rU=
------END CERTIFICATE-----
------BEGIN CERTIFICATE-----
-MIAwgKADAgECAgEAMA0GCSqGSIb3DQEBBAUAMGIxETAPBgNVBAcTCEludGVybmV0
-MRcwFQYDVQQKEw5WZXJpU2lnbiwgSW5jLjE0MDIGA1UECxMrVmVyaVNpZ24gQ2xh
-c3MgMSBDQSAtIEluZGl2aWR1YWwgU3Vic2NyaWJlcjAeFw05NjA0MDgxMDIwMjda
-Fw05NzA0MDgxMDIwMjdaMGIxETAPBgNVBAcTCEludGVybmV0MRcwFQYDVQQKEw5W
-ZXJpU2lnbiwgSW5jLjE0MDIGA1UECxMrVmVyaVNpZ24gQ2xhc3MgMSBDQSAtIElu
-ZGl2aWR1YWwgU3Vic2NyaWJlcjCAMA0GCSqGSIb3DQEBAQUAA4GNADCBiQKBgQC2
-FKbPTdAFDdjKI9BvqrQpkmOOLPhvltcunXZLEbE2jVfJw/0cxrr+Hgi6M8qV6r7j
-W80GqLd5HUQq7XPysVKDaBBwZJHXPmv5912dFEObbpdFmIFH0S3L3bty10w/cari
-QPJUObwW7s987LrbP2wqsxaxhhKdrpM01bjV0Pc+qQIDAQABAAAAADANBgkqhkiG
-9w0BAQQFAAOBgQA+1nJryNt8VBRjRr07ArDAV/3jAH7GjDc9jsrxZS68ost9v06C
-TvTNKGL+LISNmFLXl+JXhgGB0JZ9fvyYzNgHQ46HBUng1H6voalfJgS2KdEo50wW
-8EFZYMDkT1k4uynwJqkVN2QJK/2q4/A/VCov5h6SlM8Affg2W+1TLqvqkwAA
------END CERTIFICATE-----
-
- subject=/L=Internet/O=VeriSign, Inc./OU=VeriSign Class 2 CA - Individual Subscriber
- issuer= /L=Internet/O=VeriSign, Inc./OU=VeriSign Class 2 CA - Individual Subscriber
-
------BEGIN CERTIFICATE-----
-MIIEkzCCA/ygAwIBAgIRANDTUpSRL3nTFeMrMayFSPAwDQYJKoZIhvcNAQECBQAw
-YjERMA8GA1UEBxMISW50ZXJuZXQxFzAVBgNVBAoTDlZlcmlTaWduLCBJbmMuMTQw
-MgYDVQQLEytWZXJpU2lnbiBDbGFzcyAyIENBIC0gSW5kaXZpZHVhbCBTdWJzY3Jp
-YmVyMB4XDTk2MDYwNDAwMDAwMFoXDTk4MDYwNDIzNTk1OVowYjERMA8GA1UEBxMI
-SW50ZXJuZXQxFzAVBgNVBAoTDlZlcmlTaWduLCBJbmMuMTQwMgYDVQQLEytWZXJp
-U2lnbiBDbGFzcyAyIENBIC0gSW5kaXZpZHVhbCBTdWJzY3JpYmVyMIGfMA0GCSqG
-SIb3DQEBAQUAA4GNADCBiQKBgQC6A+2czKGRcYMfm8gdnk+0de99TDDzsqo0v5nb
-RsbUmMcdRQ7nsMbRWe0SAb/9QoLTZ/cJ0iOBqdrkz7UpqqKarVoTSdlSMVM92tWp
-3bJncZHQD1t4xd6lQVdI1/T6R+5J0T1ukOdsI9Jmf+F28S6g3R3L1SFwiHKeZKZv
-z+793wIDAQABo4ICRzCCAkMwggIpBgNVHQMBAf8EggIdMIICGTCCAhUwggIRBgtg
-hkgBhvhFAQcBATCCAgAWggGrVGhpcyBjZXJ0aWZpY2F0ZSBpbmNvcnBvcmF0ZXMg
-YnkgcmVmZXJlbmNlLCBhbmQgaXRzIHVzZSBpcyBzdHJpY3RseSBzdWJqZWN0IHRv
-LCB0aGUgVmVyaVNpZ24gQ2VydGlmaWNhdGlvbiBQcmFjdGljZSBTdGF0ZW1lbnQg
-KENQUyksIGF2YWlsYWJsZSBhdDogaHR0cHM6Ly93d3cudmVyaXNpZ24uY29tL0NQ
-Uy0xLjA7IGJ5IEUtbWFpbCBhdCBDUFMtcmVxdWVzdHNAdmVyaXNpZ24uY29tOyBv
-ciBieSBtYWlsIGF0IFZlcmlTaWduLCBJbmMuLCAyNTkzIENvYXN0IEF2ZS4sIE1v
-dW50YWluIFZpZXcsIENBIDk0MDQzIFVTQSBUZWwuICsxICg0MTUpIDk2MS04ODMw
-IENvcHlyaWdodCAoYykgMTk5NiBWZXJpU2lnbiwgSW5jLiAgQWxsIFJpZ2h0cyBS
-ZXNlcnZlZC4gQ0VSVEFJTiBXQVJSQU5USUVTIERJU0NMQUlNRUQgYW5kIExJQUJJ
-TElUWSBMSU1JVEVELqAOBgxghkgBhvhFAQcBAQGhDgYMYIZIAYb4RQEHAQECMC8w
-LRYraHR0cHM6Ly93d3cudmVyaXNpZ24uY29tL3JlcG9zaXRvcnkvQ1BTLTEuMDAU
-BglghkgBhvhCAQEBAf8EBAMCAgQwDQYJKoZIhvcNAQECBQADgYEApRJRkNBqLLgs
-53IR/d18ODdLOWMTZ+QOOxBrq460iBEdUwgF8vmPRX1ku7UiDeNzaLlurE6eFqHq
-2zPyK5j60zfTLVJMWKcQWwTJLjHtXrW8pxhNtFc6Fdvy5ZkHnC/9NIl7/t4U6WqB
-p4y+p7SdMIkEwIZfds0VbnQyX5MRUJY=
------END CERTIFICATE-----
-
- subject=/C=US/O=VeriSign, Inc./OU=Class 3 Public Primary Certification Authority
- issuer= /C=US/O=VeriSign, Inc./OU=Class 3 Public Primary Certification Authority
------BEGIN CERTIFICATE-----
-MIICMTCCAZoCBQKhAAABMA0GCSqGSIb3DQEBAgUAMF8xCzAJBgNVBAYTAlVTMRcw
-FQYDVQQKEw5WZXJpU2lnbiwgSW5jLjE3MDUGA1UECxMuQ2xhc3MgMyBQdWJsaWMg
-UHJpbWFyeSBDZXJ0aWZpY2F0aW9uIEF1dGhvcml0eTAeFw05NjAxMjkwMDAwMDBa
-Fw05OTEyMzEyMzU5NTlaMF8xCzAJBgNVBAYTAlVTMRcwFQYDVQQKEw5WZXJpU2ln
-biwgSW5jLjE3MDUGA1UECxMuQ2xhc3MgMyBQdWJsaWMgUHJpbWFyeSBDZXJ0aWZp
-Y2F0aW9uIEF1dGhvcml0eTCBnzANBgkqhkiG9w0BAQEFAAOBjQAwgYkCgYEAyVxZ
-nvIbigEUtBDfBEDb41evakVAj4QMC9Ez2dkRz+4CWB8l9yqoRAWq7AMfeH+ek7ma
-AKojfdashaJjRcdyJ8z0TMZ1cdI5709C8HXfCpDGjiBvmA/4rCNfcCk2pMmG57Ga
-IMtTpYXnPb59mv4kRTPcdhXtD6JxZExlLoFoRacCAwEAATANBgkqhkiG9w0BAQIF
-AAOBgQB1Zmw+0c2B27X4LzZRtvdCvM1Cr9wO+hVs+GeTVzrrtpLotgHKjLeOQ7RJ
-Zfk+7r11Ri7J/CVdqMcvi5uPaM+0nJcYwE3vH9mvgrPmZLiEXIqaB1JDYft0nls6
-NvxMsvwaPxUupVs8G5DsiCnkWRb5zget7Ond2tIxik/W2O8XjQ==
------END CERTIFICATE-----
- subject=/C=US/O=VeriSign, Inc./OU=Class 4 Public Primary Certification Authority
- issuer= /C=US/O=VeriSign, Inc./OU=Class 4 Public Primary Certification Authority
------BEGIN CERTIFICATE-----
-MIICMTCCAZoCBQKmAAABMA0GCSqGSIb3DQEBAgUAMF8xCzAJBgNVBAYTAlVTMRcw
-FQYDVQQKEw5WZXJpU2lnbiwgSW5jLjE3MDUGA1UECxMuQ2xhc3MgNCBQdWJsaWMg
-UHJpbWFyeSBDZXJ0aWZpY2F0aW9uIEF1dGhvcml0eTAeFw05NjAxMjkwMDAwMDBa
-Fw05OTEyMzEyMzU5NTlaMF8xCzAJBgNVBAYTAlVTMRcwFQYDVQQKEw5WZXJpU2ln
-biwgSW5jLjE3MDUGA1UECxMuQ2xhc3MgNCBQdWJsaWMgUHJpbWFyeSBDZXJ0aWZp
-Y2F0aW9uIEF1dGhvcml0eTCBnzANBgkqhkiG9w0BAQEFAAOBjQAwgYkCgYEA0LJ1
-9njQrlpQ9OlQqZ+M1++RlHDo0iSQdomF1t+s5gEXMoDwnZNHvJplnR+Xrr/phnVj
-IIm9gFidBAydqMEk6QvlMXi9/C0MN2qeeIDpRnX57aP7E3vIwUzSo+/1PLBij0pd
-O92VZ48TucE81qcmm+zDO3rZTbxtm+gVAePwR6kCAwEAATANBgkqhkiG9w0BAQIF
-AAOBgQBT3dPwnCR+QKri/AAa19oM/DJhuBUNlvP6Vxt/M3yv6ZiaYch6s7f/sdyZ
-g9ysEvxwyR84Qu1E9oAuW2szaayc01znX1oYx7EteQSWQZGZQbE8DbqEOcY7l/Am
-yY7uvcxClf8exwI/VAx49byqYHwCaejcrOICdmHEPgPq0ook0Q==
------END CERTIFICATE-----

apps/sess_id.c

@@ -90,6 +90,7 @@ int MAIN(int, char **);
 int MAIN(int argc, char **argv)
 	{
 	SSL_SESSION *x=NULL;
+	X509 *peer = NULL;
 	int ret=1,i,num,badops=0;
 	BIO *out=NULL;
 	int informat,outformat;
@@ -163,16 +164,17 @@ bad:
 	ERR_load_crypto_strings();
 	x=load_sess_id(infile,informat);
 	if (x == NULL) { goto end; }
+	peer = SSL_SESSION_get0_peer(x);
 
 	if(context)
 	    {
-	    x->sid_ctx_length=strlen(context);
-	    if(x->sid_ctx_length > SSL_MAX_SID_CTX_LENGTH)
+	    size_t ctx_len = strlen(context);
+	    if(ctx_len > SSL_MAX_SID_CTX_LENGTH)
 		{
 		BIO_printf(bio_err,"Context too long\n");
 		goto end;
 		}
-	    memcpy(x->sid_ctx,context,x->sid_ctx_length);
+	    SSL_SESSION_set1_id_context(x, (unsigned char *)context, ctx_len);
 	    }
 
 #ifdef undef
@@ -231,10 +233,10 @@ bad:
 
 		if (cert)
 			{
-			if (x->peer == NULL)
+			if (peer == NULL)
 				BIO_puts(out,"No certificate present\n");
 			else
-				X509_print(out,x->peer);
+				X509_print(out,peer);
 			}
 		}
 
@@ -253,12 +255,12 @@ bad:
 			goto end;
 			}
 		}
-	else if (!noout && (x->peer != NULL)) /* just print the certificate */
+	else if (!noout && (peer != NULL)) /* just print the certificate */
 		{
 		if 	(outformat == FORMAT_ASN1)
-			i=(int)i2d_X509_bio(out,x->peer);
+			i=(int)i2d_X509_bio(out,peer);
 		else if (outformat == FORMAT_PEM)
-			i=PEM_write_bio_X509(out,x->peer);
+			i=PEM_write_bio_X509(out,peer);
 		else	{
 			BIO_printf(bio_err,"bad output format specified for outfile\n");
 			goto end;

apps/smime.c

@@ -93,7 +93,7 @@ int MAIN(int argc, char **argv)
 	const char *inmode = "r", *outmode = "w";
 	char *infile = NULL, *outfile = NULL;
 	char *signerfile = NULL, *recipfile = NULL;
-	STACK_OF(STRING) *sksigners = NULL, *skkeys = NULL;
+	STACK_OF(OPENSSL_STRING) *sksigners = NULL, *skkeys = NULL;
 	char *certfile = NULL, *keyfile = NULL, *contfile=NULL;
 	const EVP_CIPHER *cipher = NULL;
 	PKCS7 *p7 = NULL;
@@ -260,13 +260,13 @@ int MAIN(int argc, char **argv)
 			if (signerfile)
 				{
 				if (!sksigners)
-					sksigners = sk_STRING_new_null();
-				sk_STRING_push(sksigners, signerfile);
+					sksigners = sk_OPENSSL_STRING_new_null();
+				sk_OPENSSL_STRING_push(sksigners, signerfile);
 				if (!keyfile)
 					keyfile = signerfile;
 				if (!skkeys)
-					skkeys = sk_STRING_new_null();
-				sk_STRING_push(skkeys, keyfile);
+					skkeys = sk_OPENSSL_STRING_new_null();
+				sk_OPENSSL_STRING_push(skkeys, keyfile);
 				keyfile = NULL;
 				}
 			signerfile = *++args;
@@ -302,12 +302,12 @@ int MAIN(int argc, char **argv)
 					goto argerr;
 					}
 				if (!sksigners)
-					sksigners = sk_STRING_new_null();
-				sk_STRING_push(sksigners, signerfile);
+					sksigners = sk_OPENSSL_STRING_new_null();
+				sk_OPENSSL_STRING_push(sksigners, signerfile);
 				signerfile = NULL;
 				if (!skkeys)
-					skkeys = sk_STRING_new_null();
-				sk_STRING_push(skkeys, keyfile);
+					skkeys = sk_OPENSSL_STRING_new_null();
+				sk_OPENSSL_STRING_push(skkeys, keyfile);
 				}
 			keyfile = *++args;
 			}
@@ -389,13 +389,13 @@ int MAIN(int argc, char **argv)
 		if (signerfile)
 			{
 			if (!sksigners)
-				sksigners = sk_STRING_new_null();
-			sk_STRING_push(sksigners, signerfile);
+				sksigners = sk_OPENSSL_STRING_new_null();
+			sk_OPENSSL_STRING_push(sksigners, signerfile);
 			if (!skkeys)
-				skkeys = sk_STRING_new_null();
+				skkeys = sk_OPENSSL_STRING_new_null();
 			if (!keyfile)
 				keyfile = signerfile;
-			sk_STRING_push(skkeys, keyfile);
+			sk_OPENSSL_STRING_push(skkeys, keyfile);
 			}
 		if (!sksigners)
 			{
@@ -671,7 +671,7 @@ int MAIN(int argc, char **argv)
 		{
 		if (!(store = setup_verify(bio_err, CAfile, CApath)))
 			goto end;
-		X509_STORE_set_verify_cb_func(store, smime_cb);
+		X509_STORE_set_verify_cb(store, smime_cb);
 		if (vpm)
 			X509_STORE_set1_param(store, vpm);
 		}
@@ -707,10 +707,10 @@ int MAIN(int argc, char **argv)
 			}
 		else
 			flags |= PKCS7_REUSE_DIGEST;
-		for (i = 0; i < sk_STRING_num(sksigners); i++)
+		for (i = 0; i < sk_OPENSSL_STRING_num(sksigners); i++)
 			{
-			signerfile = sk_STRING_value(sksigners, i);
-			keyfile = sk_STRING_value(skkeys, i);
+			signerfile = sk_OPENSSL_STRING_value(sksigners, i);
+			keyfile = sk_OPENSSL_STRING_value(skkeys, i);
 			signer = load_cert(bio_err, signerfile,FORMAT_PEM, NULL,
 					e, "signer certificate");
 			if (!signer)
@@ -807,9 +807,9 @@ end:
 	if (vpm)
 		X509_VERIFY_PARAM_free(vpm);
 	if (sksigners)
-		sk_STRING_free(sksigners);
+		sk_OPENSSL_STRING_free(sksigners);
 	if (skkeys)
-		sk_STRING_free(skkeys);
+		sk_OPENSSL_STRING_free(skkeys);
 	X509_STORE_free(store);
 	X509_free(cert);
 	X509_free(recip);

apps/speed.c

@@ -108,8 +108,14 @@
 #include <signal.h>
 #endif
 
-#ifdef _WIN32
+#if defined(_WIN32) || defined(__CYGWIN__)
 #include <windows.h>
+# if defined(__CYGWIN__) && !defined(_WIN32)
+  /* <windows.h> should define _WIN32, which normally is mutually
+   * exclusive with __CYGWIN__, but if it didn't... */
+#  define _WIN32
+  /* this is done because Cygwin alarm() fails sometimes. */
+# endif
 #endif
 
 #include <openssl/bn.h>
@@ -183,9 +189,38 @@
 #ifndef OPENSSL_NO_ECDH
 #include <openssl/ecdh.h>
 #endif
+#include <openssl/modes.h>
 
-#if !defined(OPENSSL_SYS_VMS) && !defined(OPENSSL_SYS_WINDOWS) && !defined(OPENSSL_SYS_MACINTOSH_CLASSIC) && !defined(OPENSSL_SYS_OS2) && !defined(OPENSSL_SYS_NETWARE)
-# define HAVE_FORK 1
+#ifdef OPENSSL_FIPS
+#ifdef OPENSSL_DOING_MAKEDEPEND
+#undef AES_set_encrypt_key
+#undef AES_set_decrypt_key
+#undef DES_set_key_unchecked
+#endif
+#define BF_set_key	private_BF_set_key
+#define CAST_set_key	private_CAST_set_key
+#define idea_set_encrypt_key	private_idea_set_encrypt_key
+#define SEED_set_key	private_SEED_set_key
+#define RC2_set_key	private_RC2_set_key
+#define RC4_set_key	private_RC4_set_key
+#define DES_set_key_unchecked	private_DES_set_key_unchecked
+#define AES_set_encrypt_key	private_AES_set_encrypt_key
+#define AES_set_decrypt_key	private_AES_set_decrypt_key
+#define Camellia_set_key	private_Camellia_set_key
+#endif
+
+#ifndef HAVE_FORK
+# if defined(OPENSSL_SYS_VMS) || defined(OPENSSL_SYS_WINDOWS) || defined(OPENSSL_SYS_MACINTOSH_CLASSIC) || defined(OPENSSL_SYS_OS2) || defined(OPENSSL_SYS_NETWARE)
+#  define HAVE_FORK 0
+# else
+#  define HAVE_FORK 1
+# endif
+#endif
+
+#if HAVE_FORK
+#undef NO_FORK
+#else
+#define NO_FORK
 #endif
 
 #undef BUFSIZE
@@ -200,11 +235,11 @@ static void print_message(const char *s,long num,int length);
 static void pkey_print_message(const char *str, const char *str2,
 	long num, int bits, int sec);
 static void print_result(int alg,int run_no,int count,double time_used);
-#ifdef HAVE_FORK
+#ifndef NO_FORK
 static int do_multi(int multi);
 #endif
 
-#define ALGOR_NUM	29
+#define ALGOR_NUM	30
 #define SIZE_NUM	5
 #define RSA_NUM		4
 #define DSA_NUM		3
@@ -219,11 +254,15 @@ static const char *names[ALGOR_NUM]={
   "aes-128 cbc","aes-192 cbc","aes-256 cbc",
   "camellia-128 cbc","camellia-192 cbc","camellia-256 cbc",
   "evp","sha256","sha512","whirlpool",
-  "aes-128 ige","aes-192 ige","aes-256 ige"};
+  "aes-128 ige","aes-192 ige","aes-256 ige","ghash"};
 static double results[ALGOR_NUM][SIZE_NUM];
 static int lengths[SIZE_NUM]={16,64,256,1024,8*1024};
+#ifndef OPENSSL_NO_RSA
 static double rsa_results[RSA_NUM][2];
+#endif
+#ifndef OPENSSL_NO_DSA
 static double dsa_results[DSA_NUM][2];
+#endif
 #ifndef OPENSSL_NO_ECDSA
 static double ecdsa_results[EC_NUM][2];
 #endif
@@ -259,9 +298,12 @@ static SIGRETTYPE sig_done(int sig)
 
 #if defined(_WIN32)
 
+#if !defined(SIGALRM)
 #define SIGALRM
+#endif
 static unsigned int lapse,schlock;
-static void alarm(unsigned int secs) { lapse = secs*1000; }
+static void alarm_win32(unsigned int secs) { lapse = secs*1000; }
+#define alarm alarm_win32
 
 static DWORD WINAPI sleepy(VOID *arg)
 	{
@@ -320,9 +362,6 @@ int MAIN(int, char **);
 
 int MAIN(int argc, char **argv)
 	{
-#ifndef OPENSSL_NO_ENGINE
-	ENGINE *e = NULL;
-#endif
 	unsigned char *buf=NULL,*buf2=NULL;
 	int mret=1;
 	long count=0,save_count=0;
@@ -416,7 +455,6 @@ int MAIN(int argc, char **argv)
 	unsigned char DES_iv[8];
 	unsigned char iv[2*MAX_BLOCK_SIZE/8];
 #ifndef OPENSSL_NO_DES
-	DES_cblock *buf_as_des_cblock = NULL;
 	static DES_cblock key ={0x12,0x34,0x56,0x78,0x9a,0xbc,0xde,0xf0};
 	static DES_cblock key2={0x34,0x56,0x78,0x9a,0xbc,0xde,0xf0,0x12};
 	static DES_cblock key3={0x56,0x78,0x9a,0xbc,0xde,0xf0,0x12,0x34};
@@ -459,6 +497,7 @@ int MAIN(int argc, char **argv)
 #define D_IGE_128_AES   26
 #define D_IGE_192_AES   27
 #define D_IGE_256_AES   28
+#define D_GHASH		29
 	double d=0.0;
 	long c[ALGOR_NUM][SIZE_NUM];
 #define	R_DSA_512	0
@@ -587,7 +626,7 @@ int MAIN(int argc, char **argv)
 	const EVP_CIPHER *evp_cipher=NULL;
 	const EVP_MD *evp_md=NULL;
 	int decrypt=0;
-#ifdef HAVE_FORK
+#ifndef NO_FORK
 	int multi=0;
 #endif
 
@@ -630,9 +669,6 @@ int MAIN(int argc, char **argv)
 		BIO_printf(bio_err,"out of memory\n");
 		goto end;
 		}
-#ifndef OPENSSL_NO_DES
-	buf_as_des_cblock = (DES_cblock *)buf;
-#endif
 	if ((buf2=(unsigned char *)OPENSSL_malloc((int)BUFSIZE)) == NULL)
 		{
 		BIO_printf(bio_err,"out of memory\n");
@@ -707,7 +743,7 @@ int MAIN(int argc, char **argv)
 				BIO_printf(bio_err,"no engine given\n");
 				goto end;
 				}
-                        e = setup_engine(bio_err, *argv, 0);
+                        setup_engine(bio_err, *argv, 0);
 			/* j will be increased again further down.  We just
 			   don't want speed to confuse an engine with an
 			   algorithm, especially when none is given (which
@@ -715,7 +751,7 @@ int MAIN(int argc, char **argv)
 			j--;
 			}
 #endif
-#ifdef HAVE_FORK
+#ifndef NO_FORK
 		else if	((argc > 0) && (strcmp(*argv,"-multi") == 0))
 			{
 			argc--;
@@ -887,6 +923,10 @@ int MAIN(int argc, char **argv)
 			doit[D_CBC_192_AES]=1;
 			doit[D_CBC_256_AES]=1;
 			}
+		else if (strcmp(*argv,"ghash") == 0)
+			{
+			doit[D_GHASH]=1;
+			}
 		else
 #endif
 #ifndef OPENSSL_NO_CAMELLIA
@@ -1103,7 +1143,7 @@ int MAIN(int argc, char **argv)
 			BIO_printf(bio_err,"-evp e          use EVP e.\n");
 			BIO_printf(bio_err,"-decrypt        time decryption instead of encryption (only EVP).\n");
 			BIO_printf(bio_err,"-mr             produce machine readable output.\n");
-#ifdef HAVE_FORK
+#ifndef NO_FORK
 			BIO_printf(bio_err,"-multi n        run n benchmarks in parallel.\n");
 #endif
 			goto end;
@@ -1113,7 +1153,7 @@ int MAIN(int argc, char **argv)
 		j++;
 		}
 
-#ifdef HAVE_FORK
+#ifndef NO_FORK
 	if(multi && do_multi(multi))
 		goto show_res;
 #endif
@@ -1129,6 +1169,14 @@ int MAIN(int argc, char **argv)
 			rsa_doit[i]=1;
 		for (i=0; i<DSA_NUM; i++)
 			dsa_doit[i]=1;
+#ifndef OPENSSL_NO_ECDSA
+		for (i=0; i<EC_NUM; i++)
+			ecdsa_doit[i]=1;
+#endif
+#ifndef OPENSSL_NO_ECDH
+		for (i=0; i<EC_NUM; i++)
+			ecdh_doit[i]=1;
+#endif
 		}
 	for (i=0; i<ALGOR_NUM; i++)
 		if (doit[i]) pr_header++;
@@ -1215,7 +1263,8 @@ int MAIN(int argc, char **argv)
 		count*=2;
 		Time_F(START);
 		for (it=count; it; it--)
-			DES_ecb_encrypt(buf_as_des_cblock,buf_as_des_cblock,
+			DES_ecb_encrypt((DES_cblock *)buf,
+				(DES_cblock *)buf,
 				&sch,DES_ENCRYPT);
 		d=Time_F(STOP);
 		} while (d <3);
@@ -1248,6 +1297,7 @@ int MAIN(int argc, char **argv)
 	c[D_IGE_128_AES][0]=count;
 	c[D_IGE_192_AES][0]=count;
 	c[D_IGE_256_AES][0]=count;
+	c[D_GHASH][0]=count;
 
 	for (i=1; i<SIZE_NUM; i++)
 		{
@@ -1442,7 +1492,7 @@ int MAIN(int argc, char **argv)
 # error "You cannot disable DES on systems without SIGALRM."
 #endif /* OPENSSL_NO_DES */
 #else
-#define COND(c)	(run)
+#define COND(c)	(run && count<0x7fffffff)
 #define COUNT(d) (count)
 #ifndef _WIN32
 	signal(SIGALRM,sig_done);
@@ -1738,7 +1788,22 @@ int MAIN(int argc, char **argv)
 			print_result(D_IGE_256_AES,j,count,d);
 			}
 		}
+	if (doit[D_GHASH])
+		{
+		GCM128_CONTEXT *ctx = CRYPTO_gcm128_new(&aes_ks1,(block128_f)AES_encrypt);
+		CRYPTO_gcm128_setiv (ctx,(unsigned char *)"0123456789ab",12);
 
+		for (j=0; j<SIZE_NUM; j++)
+			{
+			print_message(names[D_GHASH],c[D_GHASH][j],lengths[j]);
+			Time_F(START);
+			for (count=0,run=1; COND(c[D_GHASH][j]); count++)
+				CRYPTO_gcm128_aad(ctx,buf,lengths[j]);
+			d=Time_F(STOP);
+			print_result(D_GHASH,j,count,d);
+			}
+		CRYPTO_gcm128_release(ctx);
+		}
 
 #endif
 #ifndef OPENSSL_NO_CAMELLIA
@@ -2324,7 +2389,7 @@ int MAIN(int argc, char **argv)
 		}
 	if (rnd_fake) RAND_cleanup();
 #endif
-#ifdef HAVE_FORK
+#ifndef NO_FORK
 show_res:
 #endif
 	if(!mr)
@@ -2532,7 +2597,7 @@ static void pkey_print_message(const char *str, const char *str2, long num,
 	BIO_printf(bio_err,mr ? "+DTP:%d:%s:%s:%d\n"
 			   : "Doing %d bit %s %s's for %ds: ",bits,str,str2,tm);
 	(void)BIO_flush(bio_err);
-	alarm(RSA_SECONDS);
+	alarm(tm);
 #else
 	BIO_printf(bio_err,mr ? "+DNP:%ld:%d:%s:%s\n"
 			   : "Doing %ld %d bit %s %s's: ",num,bits,str,str2);
@@ -2550,7 +2615,7 @@ static void print_result(int alg,int run_no,int count,double time_used)
 	results[alg][run_no]=((double)count)/time_used*lengths[run_no];
 	}
 
-#ifdef HAVE_FORK
+#ifndef NO_FORK
 static char *sstrsep(char **string, const char *delim)
     {
     char isdelim[256];
@@ -2592,7 +2657,11 @@ static int do_multi(int multi)
 	fds=malloc(multi*sizeof *fds);
 	for(n=0 ; n < multi ; ++n)
 		{
-		pipe(fd);
+		if (pipe(fd) == -1)
+			{
+			fprintf(stderr, "pipe failure\n");
+			exit(1);
+			}
 		fflush(stdout);
 		fflush(stderr);
 		if(fork())
@@ -2604,7 +2673,11 @@ static int do_multi(int multi)
 			{
 			close(fd[0]);
 			close(1);
-			dup(fd[1]);
+			if (dup(fd[1]) == -1)
+				{
+				fprintf(stderr, "dup failed\n");
+				exit(1);
+				}
 			close(fd[1]);
 			mr=1;
 			usertime=0;
@@ -2687,6 +2760,7 @@ static int do_multi(int multi)
 				else
 					rsa_results[k][1]=d;
 				}
+#ifndef OPENSSL_NO_DSA
 			else if(!strncmp(buf,"+F3:",4))
 				{
 				int k;
@@ -2708,6 +2782,7 @@ static int do_multi(int multi)
 				else
 					dsa_results[k][1]=d;
 				}
+#endif
 #ifndef OPENSSL_NO_ECDSA
 			else if(!strncmp(buf,"+F4:",4))
 				{

apps/srp.c

@@ -0,0 +1,756 @@
+/* apps/srp.c */
+/* Written by Peter Sylvester (peter.sylvester@edelweb.fr)  
+ * for the EdelKey project and contributed to the OpenSSL project 2004.
+ */
+/* ====================================================================
+ * Copyright (c) 2004 The OpenSSL Project.  All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer. 
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ *
+ * 3. All advertising materials mentioning features or use of this
+ *    software must display the following acknowledgment:
+ *    "This product includes software developed by the OpenSSL Project
+ *    for use in the OpenSSL Toolkit. (http://www.OpenSSL.org/)"
+ *
+ * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
+ *    endorse or promote products derived from this software without
+ *    prior written permission. For written permission, please contact
+ *    licensing@OpenSSL.org.
+ *
+ * 5. Products derived from this software may not be called "OpenSSL"
+ *    nor may "OpenSSL" appear in their names without prior written
+ *    permission of the OpenSSL Project.
+ *
+ * 6. Redistributions of any form whatsoever must retain the following
+ *    acknowledgment:
+ *    "This product includes software developed by the OpenSSL Project
+ *    for use in the OpenSSL Toolkit (http://www.OpenSSL.org/)"
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
+ * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
+ * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE OpenSSL PROJECT OR
+ * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
+ * OF THE POSSIBILITY OF SUCH DAMAGE.
+ * ====================================================================
+ *
+ * This product includes cryptographic software written by Eric Young
+ * (eay@cryptsoft.com).  This product includes software written by Tim
+ * Hudson (tjh@cryptsoft.com).
+ *
+ */
+#include <openssl/opensslconf.h>
+
+#ifndef OPENSSL_NO_SRP
+#include <stdio.h>
+#include <stdlib.h>
+#include <string.h>
+#include <openssl/conf.h>
+#include <openssl/bio.h>
+#include <openssl/err.h>
+#include <openssl/txt_db.h>
+#include <openssl/buffer.h>
+#include <openssl/srp.h>
+
+#include "apps.h"
+
+#undef PROG
+#define PROG srp_main
+
+#define BASE_SECTION	"srp"
+#define CONFIG_FILE "openssl.cnf"
+
+#define ENV_RANDFILE		"RANDFILE"
+
+#define ENV_DATABASE		"srpvfile"
+#define ENV_DEFAULT_SRP		"default_srp"
+
+static char *srp_usage[]={
+"usage: srp [args] [user] \n",
+"\n",
+" -verbose        Talk alot while doing things\n",
+" -config file    A config file\n",
+" -name arg       The particular srp definition to use\n",
+" -srpvfile arg   The srp verifier file name\n",
+" -add            add an user and srp verifier\n",
+" -modify         modify the srp verifier of an existing user\n",
+" -delete         delete user from verifier file\n",
+" -list           list user\n",
+" -gn arg         g and N values to be used for new verifier\n",
+" -userinfo arg   additional info to be set for user\n",
+" -passin arg     input file pass phrase source\n",
+" -passout arg    output file pass phrase source\n",
+#ifndef OPENSSL_NO_ENGINE
+" -engine e         - use engine e, possibly a hardware device.\n",
+#endif
+NULL
+};
+
+#ifdef EFENCE
+extern int EF_PROTECT_FREE;
+extern int EF_PROTECT_BELOW;
+extern int EF_ALIGNMENT;
+#endif
+
+static CONF *conf=NULL;
+static char *section=NULL;
+
+#define VERBOSE if (verbose) 
+#define VVERBOSE if (verbose>1) 
+
+
+int MAIN(int, char **);
+
+static int get_index(CA_DB *db, char* id, char type)
+	{
+	char ** pp;
+	int i;
+	if (id == NULL) return -1;
+	if (type == DB_SRP_INDEX) 
+	for (i = 0; i < sk_OPENSSL_PSTRING_num(db->db->data); i++)
+		{
+		pp = (char **)sk_OPENSSL_PSTRING_value(db->db->data, i);
+		if (pp[DB_srptype][0] == DB_SRP_INDEX  && !strcmp(id, pp[DB_srpid])) 
+			return i;
+		}
+	else for (i = 0; i < sk_OPENSSL_PSTRING_num(db->db->data); i++)
+		{
+		pp = (char **)sk_OPENSSL_PSTRING_value(db->db->data, i);
+
+		if (pp[DB_srptype][0] != DB_SRP_INDEX && !strcmp(id,pp[DB_srpid])) 
+			return i;
+		}
+
+	return -1 ; 
+	}
+
+static void print_entry(CA_DB *db, BIO *bio, int indx, int verbose, char *s)
+	{
+	if (indx >= 0 && verbose)
+		{
+		int j;
+		char **pp = (char **)sk_OPENSSL_PSTRING_value(db->db->data, indx);
+		BIO_printf(bio, "%s \"%s\"\n", s, pp[DB_srpid]);
+		for (j = 0; j < DB_NUMBER; j++)
+			{
+			BIO_printf(bio_err,"  %d = \"%s\"\n", j, pp[j]);
+			}
+		}
+	}
+
+static void print_index(CA_DB *db, BIO *bio, int indexindex, int verbose)
+	{
+	print_entry(db, bio, indexindex, verbose, "g N entry") ;
+	}
+
+static void print_user(CA_DB *db, BIO *bio, int userindex, int verbose)
+	{
+	if (verbose > 0)
+		{
+		char **pp = (char **)sk_OPENSSL_PSTRING_value(db->db->data, userindex);
+
+		if (pp[DB_srptype][0] != 'I')
+			{
+			print_entry(db, bio, userindex, verbose, "User entry");
+			print_entry(db, bio, get_index(db, pp[DB_srpgN], 'I'), verbose, "g N entry");
+			}
+
+		}
+	}
+
+static int update_index(CA_DB *db, BIO *bio, char **row)
+	{
+	char ** irow;
+	int i;
+
+	if ((irow=(char **)OPENSSL_malloc(sizeof(char *)*(DB_NUMBER+1))) == NULL)
+		{
+		BIO_printf(bio_err,"Memory allocation failure\n");
+		return 0;
+		}
+
+	for (i=0; i<DB_NUMBER; i++)
+		{
+		irow[i]=row[i];
+		row[i]=NULL;
+		}
+	irow[DB_NUMBER]=NULL;
+
+	if (!TXT_DB_insert(db->db,irow))
+		{
+		BIO_printf(bio,"failed to update srpvfile\n");
+		BIO_printf(bio,"TXT_DB error number %ld\n",db->db->error);
+		OPENSSL_free(irow);
+		return 0;
+		}
+	return 1;
+	}
+
+static void lookup_fail(const char *name, char *tag)
+	{
+	BIO_printf(bio_err,"variable lookup failed for %s::%s\n",name,tag);
+	}
+
+
+static char *srp_verify_user(const char *user, const char *srp_verifier,
+			     char *srp_usersalt, const char *g, const char *N,
+			     const char *passin, BIO *bio, int verbose)
+	{
+	char password[1024];
+	PW_CB_DATA cb_tmp;
+	char *verifier = NULL;
+	char *gNid = NULL;
+
+	cb_tmp.prompt_info = user;
+	cb_tmp.password = passin;
+
+ 	if (password_callback(password, 1024, 0, &cb_tmp) >0)
+		{
+		VERBOSE BIO_printf(bio,"Validating\n   user=\"%s\"\n srp_verifier=\"%s\"\n srp_usersalt=\"%s\"\n g=\"%s\"\n N=\"%s\"\n",user,srp_verifier,srp_usersalt, g, N);
+		BIO_printf(bio, "Pass %s\n", password);
+
+		if (!(gNid=SRP_create_verifier(user, password, &srp_usersalt, &verifier, N, g)))
+			{
+			BIO_printf(bio, "Internal error validating SRP verifier\n");
+			}
+		else
+			{
+			if (strcmp(verifier, srp_verifier))
+				gNid = NULL;
+			OPENSSL_free(verifier);
+			}
+		}
+	return gNid;
+	}
+
+static char *srp_create_user(char *user, char **srp_verifier,
+			     char **srp_usersalt, char *g, char *N,
+			     char *passout, BIO *bio, int verbose)
+	{
+ 	char password[1024];
+        PW_CB_DATA cb_tmp;
+	char *gNid = NULL;
+	char *salt = NULL;
+        cb_tmp.prompt_info = user;
+        cb_tmp.password = passout;
+
+	if (password_callback(password,1024,1,&cb_tmp) >0)
+		{
+		VERBOSE BIO_printf(bio,"Creating\n user=\"%s\"\n g=\"%s\"\n N=\"%s\"\n",user,g,N);
+		if (!(gNid =SRP_create_verifier(user, password, &salt, srp_verifier, N, g)))
+			{
+			BIO_printf(bio,"Internal error creating SRP verifier\n");
+			}
+		else 
+			*srp_usersalt = salt;
+		VVERBOSE BIO_printf(bio,"gNid=%s salt =\"%s\"\n verifier =\"%s\"\n", gNid,salt, *srp_verifier);
+
+		}
+	return gNid;
+	}
+
+int MAIN(int argc, char **argv)
+	{
+	int add_user = 0;
+	int list_user= 0;
+	int delete_user= 0;
+	int modify_user= 0;
+	char * user = NULL;
+
+	char *passargin = NULL, *passargout = NULL;
+	char *passin = NULL, *passout = NULL;
+        char * gN = NULL;
+	int gNindex = -1;
+	char ** gNrow = NULL;
+	int maxgN = -1;
+
+	char * userinfo = NULL;
+
+	int badops=0;
+	int ret=1;
+	int errors=0;
+	int verbose=0;
+	int doupdatedb=0;
+	char *configfile=NULL;
+	char *dbfile=NULL;
+	CA_DB *db=NULL;
+	char **pp ;
+	int i;
+	long errorline = -1;
+	char *randfile=NULL;
+#ifndef OPENSSL_NO_ENGINE
+	char *engine = NULL;
+#endif
+	char *tofree=NULL;
+	DB_ATTR db_attr;
+
+#ifdef EFENCE
+EF_PROTECT_FREE=1;
+EF_PROTECT_BELOW=1;
+EF_ALIGNMENT=0;
+#endif
+
+	apps_startup();
+
+	conf = NULL;
+	section = NULL;
+
+	if (bio_err == NULL)
+		if ((bio_err=BIO_new(BIO_s_file())) != NULL)
+			BIO_set_fp(bio_err,stderr,BIO_NOCLOSE|BIO_FP_TEXT);
+
+	argc--;
+	argv++;
+	while (argc >= 1 && badops == 0)
+		{
+		if	(strcmp(*argv,"-verbose") == 0)
+			verbose++;
+		else if	(strcmp(*argv,"-config") == 0)
+			{
+			if (--argc < 1) goto bad;
+			configfile= *(++argv);
+			}
+		else if (strcmp(*argv,"-name") == 0)
+			{
+			if (--argc < 1) goto bad;
+			section= *(++argv);
+			}
+		else if	(strcmp(*argv,"-srpvfile") == 0)
+			{
+			if (--argc < 1) goto bad;
+			dbfile= *(++argv);
+			}
+		else if (strcmp(*argv,"-add") == 0)
+			add_user=1;
+		else if (strcmp(*argv,"-delete") == 0)
+			delete_user=1;
+		else if (strcmp(*argv,"-modify") == 0)
+			modify_user=1;
+		else if (strcmp(*argv,"-list") == 0)
+			list_user=1;
+		else if (strcmp(*argv,"-gn") == 0)
+			{
+			if (--argc < 1) goto bad;
+			gN= *(++argv);
+			}
+		else if (strcmp(*argv,"-userinfo") == 0)
+			{
+			if (--argc < 1) goto bad;
+			userinfo= *(++argv);
+			}
+		else if (strcmp(*argv,"-passin") == 0)
+			{
+			if (--argc < 1) goto bad;
+			passargin= *(++argv);
+			}
+		else if (strcmp(*argv,"-passout") == 0)
+			{
+			if (--argc < 1) goto bad;
+			passargout= *(++argv);
+			}
+#ifndef OPENSSL_NO_ENGINE
+		else if (strcmp(*argv,"-engine") == 0)
+			{
+			if (--argc < 1) goto bad;
+			engine= *(++argv);
+			}
+#endif
+
+		else if (**argv == '-')
+			{
+bad:
+			BIO_printf(bio_err,"unknown option %s\n",*argv);
+			badops=1;
+			break;
+			}
+		else 
+			break;
+	
+		argc--;
+		argv++;
+		}
+
+	if (dbfile && configfile)
+		{
+		BIO_printf(bio_err,"-dbfile and -configfile cannot be specified together.\n");
+		badops = 1;
+		}
+	if (add_user+delete_user+modify_user+list_user != 1)
+		{
+		BIO_printf(bio_err,"Exactly one of the options -add, -delete, -modify -list must be specified.\n");
+		badops = 1;
+		}
+	if (delete_user+modify_user+delete_user== 1 && argc <= 0)
+		{
+		BIO_printf(bio_err,"Need at least one user for options -add, -delete, -modify. \n");
+		badops = 1;
+		}
+	if ((passin || passout) && argc != 1 )
+		{
+		BIO_printf(bio_err,"-passin, -passout arguments only valid with one user.\n");
+		badops = 1;
+		}
+
+	if (badops)
+		{
+		for (pp=srp_usage; (*pp != NULL); pp++)
+			BIO_printf(bio_err,"%s",*pp);
+
+		BIO_printf(bio_err," -rand file%cfile%c...\n", LIST_SEPARATOR_CHAR, LIST_SEPARATOR_CHAR);
+		BIO_printf(bio_err,"                 load the file (or the files in the directory) into\n");
+		BIO_printf(bio_err,"                 the random number generator\n");
+		goto err;
+		}
+
+	ERR_load_crypto_strings();
+
+#ifndef OPENSSL_NO_ENGINE
+	setup_engine(bio_err, engine, 0);
+#endif
+
+	if(!app_passwd(bio_err, passargin, passargout, &passin, &passout))
+		{
+		BIO_printf(bio_err, "Error getting passwords\n");
+		goto err;
+		}
+
+        if (!dbfile)
+		{
+
+
+	/*****************************************************************/
+		tofree=NULL;
+		if (configfile == NULL) configfile = getenv("OPENSSL_CONF");
+		if (configfile == NULL) configfile = getenv("SSLEAY_CONF");
+		if (configfile == NULL)
+			{
+			const char *s=X509_get_default_cert_area();
+			size_t len;
+
+#ifdef OPENSSL_SYS_VMS
+			len = strlen(s)+sizeof(CONFIG_FILE);
+			tofree=OPENSSL_malloc(len);
+			strcpy(tofree,s);
+#else
+			len = strlen(s)+sizeof(CONFIG_FILE)+1;
+			tofree=OPENSSL_malloc(len);
+			BUF_strlcpy(tofree,s,len);
+			BUF_strlcat(tofree,"/",len);
+#endif
+			BUF_strlcat(tofree,CONFIG_FILE,len);
+			configfile=tofree;
+			}
+
+		VERBOSE BIO_printf(bio_err,"Using configuration from %s\n",configfile);
+		conf = NCONF_new(NULL);
+		if (NCONF_load(conf,configfile,&errorline) <= 0)
+			{
+			if (errorline <= 0)
+				BIO_printf(bio_err,"error loading the config file '%s'\n",
+					configfile);
+			else
+				BIO_printf(bio_err,"error on line %ld of config file '%s'\n"
+					,errorline,configfile);
+			goto err;
+			}
+		if(tofree)
+			{
+			OPENSSL_free(tofree);
+			tofree = NULL;
+			}
+
+		if (!load_config(bio_err, conf))
+			goto err;
+
+	/* Lets get the config section we are using */
+		if (section == NULL)
+			{
+			VERBOSE BIO_printf(bio_err,"trying to read " ENV_DEFAULT_SRP " in \" BASE_SECTION \"\n");
+
+			section=NCONF_get_string(conf,BASE_SECTION,ENV_DEFAULT_SRP);
+			if (section == NULL)
+				{
+				lookup_fail(BASE_SECTION,ENV_DEFAULT_SRP);
+				goto err;
+				}
+			}
+         
+		if (randfile == NULL && conf)
+	        	randfile = NCONF_get_string(conf, BASE_SECTION, "RANDFILE");
+
+	
+		VERBOSE BIO_printf(bio_err,"trying to read " ENV_DATABASE " in section \"%s\"\n",section);
+
+		if ((dbfile=NCONF_get_string(conf,section,ENV_DATABASE)) == NULL)
+			{
+			lookup_fail(section,ENV_DATABASE);
+			goto err;
+			}
+
+        	}
+	if (randfile == NULL)
+		ERR_clear_error();
+       	else 
+		app_RAND_load_file(randfile, bio_err, 0);
+
+	VERBOSE BIO_printf(bio_err,"Trying to read SRP verifier file \"%s\"\n",dbfile);
+
+	db = load_index(dbfile, &db_attr);
+	if (db == NULL) goto err;
+
+	/* Lets check some fields */
+	for (i = 0; i < sk_OPENSSL_PSTRING_num(db->db->data); i++)
+		{
+		pp = (char **)sk_OPENSSL_PSTRING_value(db->db->data, i);
+	
+		if (pp[DB_srptype][0] == DB_SRP_INDEX)
+			{
+			maxgN = i;
+			if (gNindex < 0 && gN != NULL && !strcmp(gN, pp[DB_srpid]))
+				gNindex = i;
+
+			print_index(db, bio_err, i, verbose > 1);
+			}
+		}
+	
+	VERBOSE BIO_printf(bio_err, "Database initialised\n");
+
+	if (gNindex >= 0)
+		{
+		gNrow = (char **)sk_OPENSSL_PSTRING_value(db->db->data, gNindex);
+		print_entry(db, bio_err, gNindex, verbose > 1, "Default g and N") ;
+		}
+	else if (maxgN > 0 && !SRP_get_default_gN(gN))
+		{
+		BIO_printf(bio_err, "No g and N value for index \"%s\"\n", gN);
+		goto err;
+		}
+	else
+		{
+		VERBOSE BIO_printf(bio_err, "Database has no g N information.\n");
+		gNrow = NULL;
+		}
+	
+
+	VVERBOSE BIO_printf(bio_err,"Starting user processing\n");
+
+	if (argc > 0)
+		user = *(argv++) ;
+
+	while (list_user || user)
+		{
+		int userindex = -1;
+		if (user) 
+			VVERBOSE BIO_printf(bio_err, "Processing user \"%s\"\n", user);
+		if ((userindex = get_index(db, user, 'U')) >= 0)
+			{
+			print_user(db, bio_err, userindex, (verbose > 0) || list_user);
+			}
+		
+		if (list_user)
+			{
+			if (user == NULL)
+				{
+				BIO_printf(bio_err,"List all users\n");
+
+				for (i = 0; i < sk_OPENSSL_PSTRING_num(db->db->data); i++)
+					{
+					print_user(db,bio_err, i, 1);
+					}
+				list_user = 0;
+				}
+			else if (userindex < 0)
+				{
+				BIO_printf(bio_err, "user \"%s\" does not exist, ignored. t\n",
+					   user);
+				errors++;
+				}
+			}
+		else if (add_user)
+			{
+			if (userindex >= 0)
+				{
+				/* reactivation of a new user */
+				char **row = (char **)sk_OPENSSL_PSTRING_value(db->db->data, userindex);
+				BIO_printf(bio_err, "user \"%s\" reactivated.\n", user);
+				row[DB_srptype][0] = 'V';
+
+				doupdatedb = 1;
+				}
+			else
+				{
+				char *row[DB_NUMBER] ; char *gNid;
+				row[DB_srpverifier] = NULL;
+				row[DB_srpsalt] = NULL;
+				row[DB_srpinfo] = NULL;
+				if (!(gNid = srp_create_user(user,&(row[DB_srpverifier]), &(row[DB_srpsalt]),gNrow?gNrow[DB_srpsalt]:gN,gNrow?gNrow[DB_srpverifier]:NULL, passout, bio_err,verbose)))
+					{
+						BIO_printf(bio_err, "Cannot create srp verifier for user \"%s\", operation abandoned .\n", user);
+						errors++;
+						goto err;
+					}
+				row[DB_srpid] = BUF_strdup(user);
+				row[DB_srptype] = BUF_strdup("v");
+				row[DB_srpgN] = BUF_strdup(gNid);
+
+				if (!row[DB_srpid] || !row[DB_srpgN] || !row[DB_srptype] || !row[DB_srpverifier] || !row[DB_srpsalt] ||
+					(userinfo && (!(row[DB_srpinfo] = BUF_strdup(userinfo)))) || 
+					!update_index(db, bio_err, row))
+					{
+					if (row[DB_srpid]) OPENSSL_free(row[DB_srpid]);
+					if (row[DB_srpgN]) OPENSSL_free(row[DB_srpgN]);
+					if (row[DB_srpinfo]) OPENSSL_free(row[DB_srpinfo]);
+					if (row[DB_srptype]) OPENSSL_free(row[DB_srptype]);
+					if (row[DB_srpverifier]) OPENSSL_free(row[DB_srpverifier]);
+					if (row[DB_srpsalt]) OPENSSL_free(row[DB_srpsalt]);
+					goto err;
+					}
+				doupdatedb = 1;
+				}
+			}
+		else if (modify_user)
+			{
+			if (userindex < 0)
+				{
+				BIO_printf(bio_err,"user \"%s\" does not exist, operation ignored.\n",user);
+				errors++;
+				}
+			else
+				{
+
+				char **row = (char **)sk_OPENSSL_PSTRING_value(db->db->data, userindex);
+				char type = row[DB_srptype][0];
+				if (type == 'v')
+					{
+					BIO_printf(bio_err,"user \"%s\" already updated, operation ignored.\n",user);
+					errors++;
+					}
+				else
+					{
+					char *gNid;
+
+					if (row[DB_srptype][0] == 'V')
+						{
+						int user_gN;
+						char **irow = NULL;
+						VERBOSE BIO_printf(bio_err,"Verifying password for user \"%s\"\n",user);
+						if ( (user_gN = get_index(db, row[DB_srpgN], DB_SRP_INDEX)) >= 0)
+							irow = (char **)sk_OPENSSL_PSTRING_value(db->db->data, userindex);
+
+ 						if (!srp_verify_user(user, row[DB_srpverifier], row[DB_srpsalt], irow ? irow[DB_srpsalt] : row[DB_srpgN], irow ? irow[DB_srpverifier] : NULL, passin, bio_err, verbose))
+							{
+							BIO_printf(bio_err, "Invalid password for user \"%s\", operation abandoned.\n", user);
+							errors++;
+							goto err;
+							}
+						} 
+					VERBOSE BIO_printf(bio_err,"Password for user \"%s\" ok.\n",user);
+
+					if (!(gNid=srp_create_user(user,&(row[DB_srpverifier]), &(row[DB_srpsalt]),gNrow?gNrow[DB_srpsalt]:NULL, gNrow?gNrow[DB_srpverifier]:NULL, passout, bio_err,verbose)))
+						{
+							BIO_printf(bio_err, "Cannot create srp verifier for user \"%s\", operation abandoned.\n", user);
+							errors++;
+							goto err;
+						}
+
+					row[DB_srptype][0] = 'v';
+					row[DB_srpgN] = BUF_strdup(gNid);
+ 
+					if (!row[DB_srpid] || !row[DB_srpgN] || !row[DB_srptype] || !row[DB_srpverifier] || !row[DB_srpsalt] ||
+						(userinfo && (!(row[DB_srpinfo] = BUF_strdup(userinfo)))))  
+						goto err;
+
+					doupdatedb = 1;
+					}
+				}
+			}
+		else if (delete_user)
+			{
+			if (userindex < 0)
+				{
+				BIO_printf(bio_err, "user \"%s\" does not exist, operation ignored. t\n", user);
+				errors++;
+				}
+			else
+				{
+				char **xpp = (char **)sk_OPENSSL_PSTRING_value(db->db->data, userindex);
+				BIO_printf(bio_err, "user \"%s\" revoked. t\n", user);
+
+				xpp[DB_srptype][0] = 'R';
+				
+				doupdatedb = 1;
+				}
+			}
+		if (--argc > 0)
+			user = *(argv++) ;
+		else
+			{
+			user = NULL;
+			list_user = 0;
+			}
+		}
+
+	VERBOSE BIO_printf(bio_err,"User procession done.\n");
+
+
+	if (doupdatedb)
+		{
+		/* Lets check some fields */
+		for (i = 0; i < sk_OPENSSL_PSTRING_num(db->db->data); i++)
+			{
+			pp = (char **)sk_OPENSSL_PSTRING_value(db->db->data, i);
+	
+			if (pp[DB_srptype][0] == 'v')
+				{
+				pp[DB_srptype][0] = 'V';
+				print_user(db, bio_err, i, verbose);
+				}
+			}
+
+		VERBOSE BIO_printf(bio_err, "Trying to update srpvfile.\n");
+		if (!save_index(dbfile, "new", db)) goto err;
+				
+		VERBOSE BIO_printf(bio_err, "Temporary srpvfile created.\n");
+		if (!rotate_index(dbfile, "new", "old")) goto err;
+
+		VERBOSE BIO_printf(bio_err, "srpvfile updated.\n");
+		}
+
+	ret = (errors != 0);
+err:
+	if (errors != 0)
+	VERBOSE BIO_printf(bio_err,"User errors %d.\n",errors);
+
+	VERBOSE BIO_printf(bio_err,"SRP terminating with code %d.\n",ret);
+	if(tofree)
+		OPENSSL_free(tofree);
+	if (ret) ERR_print_errors(bio_err);
+	if (randfile) app_RAND_write_file(randfile, bio_err);
+	if (conf) NCONF_free(conf);
+	if (db) free_index(db);
+
+	OBJ_cleanup();
+	apps_shutdown();
+	OPENSSL_EXIT(ret);
+	}
+
+
+
+#endif
+

apps/ts.c

@@ -165,6 +165,9 @@ int MAIN(int argc, char **argv)
 		BIO_set_fp(bio_err, stderr, BIO_NOCLOSE | BIO_FP_TEXT);
 		}
 
+	if (!load_config(bio_err, NULL))
+		goto cleanup;
+
 	for (argc--, argv++; argc > 0; argc--, argv++)
 		{
 		if (strcmp(*argv, "-config") == 0)
@@ -646,7 +649,7 @@ static ASN1_INTEGER *create_nonce(int bits)
 
 	/* Generating random byte sequence. */
 	if (len > (int)sizeof(buf)) goto err;
-	if (!RAND_bytes(buf, len)) goto err;
+	if (RAND_bytes(buf, len) <= 0) goto err;
 
 	/* Find the first non-zero byte and creating ASN1_INTEGER object. */
 	for (i = 0; i < len && !buf[i]; ++i);
@@ -1080,7 +1083,7 @@ static X509_STORE *create_cert_store(char *ca_path, char *ca_file)
 	cert_ctx = X509_STORE_new();
 
 	/* Setting the callback for certificate chain verification. */
-	X509_STORE_set_verify_cb_func(cert_ctx, verify_cb);
+	X509_STORE_set_verify_cb(cert_ctx, verify_cb);
 
 	/* Adding a trusted certificate directory source. */
 	if (ca_path)

apps/tsget

@@ -1,13 +1,13 @@
 #!/usr/bin/perl -w
 # Written by Zoltan Glozik <zglozik@stones.com>.
 # Copyright (c) 2002 The OpenTSA Project.  All rights reserved.
-$::version = '$Id: tsget,v 1.1 2006/02/12 23:11:21 ulf Exp $';
+$::version = '$Id: tsget,v 1.1.2.2 2009/09/07 17:57:02 steve Exp $';
 
 use strict;
 use IO::Handle;
 use Getopt::Std;
 use File::Basename;
-use WWW::Curl::easy;
+use WWW::Curl::Easy;
 
 use vars qw(%options);
 
@@ -37,7 +37,7 @@ sub create_curl {
     my $url = shift;
 
     # Create Curl object.
-    my $curl = WWW::Curl::easy::new();
+    my $curl = WWW::Curl::Easy::new();
 
     # Error-handling related options.
     $curl->setopt(CURLOPT_VERBOSE, 1) if $options{d};
@@ -49,7 +49,7 @@ sub create_curl {
     $curl->setopt(CURLOPT_CUSTOMREQUEST, "POST");
     $curl->setopt(CURLOPT_HTTPHEADER,
 		["Content-Type: application/timestamp-query",
-		"Accept: application/timestamp-reply"]);
+		"Accept: application/timestamp-reply,application/timestamp-response"]);
     $curl->setopt(CURLOPT_READFUNCTION, \&read_body);
     $curl->setopt(CURLOPT_HEADERFUNCTION, sub { return length($_[0]); });
 
@@ -102,7 +102,8 @@ sub get_timestamp {
 	$error_string .= " ($::error_buf)" if defined($::error_buf);
     } else {
         my $ct = $curl->getinfo(CURLINFO_CONTENT_TYPE);
-	if (lc($ct) ne "application/timestamp-reply") {
+	if (lc($ct) ne "application/timestamp-reply"
+	    && lc($ct) ne "application/timestamp-response") {
 	    $error_string = "unexpected content type returned: $ct";
         }
     }
@@ -192,4 +193,4 @@ REQUEST: foreach (@ARGV) {
     STDERR->printflush(", $output written.\n") if $options{v};
 }
 $curl->cleanup();
-WWW::Curl::easy::global_cleanup();
+WWW::Curl::Easy::global_cleanup();

apps/verify.c

@@ -70,8 +70,9 @@
 #define PROG	verify_main
 
 static int MS_CALLBACK cb(int ok, X509_STORE_CTX *ctx);
-static int check(X509_STORE *ctx, char *file, STACK_OF(X509) *uchain, STACK_OF(X509) *tchain, int purpose, ENGINE *e);
-static STACK_OF(X509) *load_untrusted(char *file);
+static int check(X509_STORE *ctx, char *file,
+		STACK_OF(X509) *uchain, STACK_OF(X509) *tchain,
+		STACK_OF(X509_CRL) *crls, ENGINE *e);
 static int v_verbose=0, vflags = 0;
 
 int MAIN(int, char **);
@@ -80,10 +81,10 @@ int MAIN(int argc, char **argv)
 	{
 	ENGINE *e = NULL;
 	int i,ret=1, badarg = 0;
-	int purpose = -1;
 	char *CApath=NULL,*CAfile=NULL;
-	char *untfile = NULL, *trustfile = NULL;
+	char *untfile = NULL, *trustfile = NULL, *crlfile = NULL;
 	STACK_OF(X509) *untrusted = NULL, *trusted = NULL;
+	STACK_OF(X509_CRL) *crls = NULL;
 	X509_STORE *cert_ctx=NULL;
 	X509_LOOKUP *lookup=NULL;
 	X509_VERIFY_PARAM *vpm = NULL;
@@ -93,7 +94,7 @@ int MAIN(int argc, char **argv)
 
 	cert_ctx=X509_STORE_new();
 	if (cert_ctx == NULL) goto end;
-	X509_STORE_set_verify_cb_func(cert_ctx,cb);
+	X509_STORE_set_verify_cb(cert_ctx,cb);
 
 	ERR_load_crypto_strings();
 
@@ -139,6 +140,11 @@ int MAIN(int argc, char **argv)
 				if (argc-- < 1) goto end;
 				trustfile= *(++argv);
 				}
+			else if (strcmp(*argv,"-CRLfile") == 0)
+				{
+				if (argc-- < 1) goto end;
+				crlfile= *(++argv);
+				}
 #ifndef OPENSSL_NO_ENGINE
 			else if (strcmp(*argv,"-engine") == 0)
 				{
@@ -192,30 +198,39 @@ int MAIN(int argc, char **argv)
 
 	ERR_clear_error();
 
-	if(untfile) {
-		if(!(untrusted = load_untrusted(untfile))) {
-			BIO_printf(bio_err, "Error loading untrusted file %s\n", untfile);
-			ERR_print_errors(bio_err);
+	if(untfile)
+		{
+		untrusted = load_certs(bio_err, untfile, FORMAT_PEM,
+					NULL, e, "untrusted certificates");
+		if(!untrusted)
 			goto end;
 		}
-	}
 
-	if(trustfile) {
-		if(!(trusted = load_untrusted(trustfile))) {
-			BIO_printf(bio_err, "Error loading untrusted file %s\n", trustfile);
-			ERR_print_errors(bio_err);
+	if(trustfile)
+		{
+		trusted = load_certs(bio_err, trustfile, FORMAT_PEM,
+					NULL, e, "trusted certificates");
+		if(!trusted)
 			goto end;
 		}
-	}
 
-	if (argc < 1) check(cert_ctx, NULL, untrusted, trusted, purpose, e);
+	if(crlfile)
+		{
+		crls = load_crls(bio_err, crlfile, FORMAT_PEM,
+					NULL, e, "other CRLs");
+		if(!crls)
+			goto end;
+		}
+
+	if (argc < 1) check(cert_ctx, NULL, untrusted, trusted, crls, e);
 	else
 		for (i=0; i<argc; i++)
-			check(cert_ctx,argv[i], untrusted, trusted, purpose, e);
+			check(cert_ctx,argv[i], untrusted, trusted, crls, e);
 	ret=0;
 end:
 	if (ret == 1) {
 		BIO_printf(bio_err,"usage: verify [-verbose] [-CApath path] [-CAfile file] [-purpose purpose] [-crl_check]");
+		BIO_printf(bio_err," [-attime timestamp]");
 #ifndef OPENSSL_NO_ENGINE
 		BIO_printf(bio_err," [-engine e]");
 #endif
@@ -232,11 +247,14 @@ end:
 	if (cert_ctx != NULL) X509_STORE_free(cert_ctx);
 	sk_X509_pop_free(untrusted, X509_free);
 	sk_X509_pop_free(trusted, X509_free);
+	sk_X509_CRL_pop_free(crls, X509_CRL_free);
 	apps_shutdown();
 	OPENSSL_EXIT(ret);
 	}
 
-static int check(X509_STORE *ctx, char *file, STACK_OF(X509) *uchain, STACK_OF(X509) *tchain, int purpose, ENGINE *e)
+static int check(X509_STORE *ctx, char *file,
+		STACK_OF(X509) *uchain, STACK_OF(X509) *tchain,
+		STACK_OF(X509_CRL) *crls, ENGINE *e)
 	{
 	X509 *x=NULL;
 	int i=0,ret=0;
@@ -260,7 +278,8 @@ static int check(X509_STORE *ctx, char *file, STACK_OF(X509) *uchain, STACK_OF(X
 		goto end;
 		}
 	if(tchain) X509_STORE_CTX_trusted_stack(csc, tchain);
-	if(purpose >= 0) X509_STORE_CTX_set_purpose(csc, purpose);
+	if (crls)
+		X509_STORE_CTX_set0_crls(csc, crls);
 	i=X509_verify_cert(csc);
 	X509_STORE_CTX_free(csc);
 
@@ -278,90 +297,53 @@ end:
 	return(ret);
 	}
 
-static STACK_OF(X509) *load_untrusted(char *certfile)
-{
-	STACK_OF(X509_INFO) *sk=NULL;
-	STACK_OF(X509) *stack=NULL, *ret=NULL;
-	BIO *in=NULL;
-	X509_INFO *xi;
-
-	if(!(stack = sk_X509_new_null())) {
-		BIO_printf(bio_err,"memory allocation failure\n");
-		goto end;
-	}
-
-	if(!(in=BIO_new_file(certfile, "r"))) {
-		BIO_printf(bio_err,"error opening the file, %s\n",certfile);
-		goto end;
-	}
-
-	/* This loads from a file, a stack of x509/crl/pkey sets */
-	if(!(sk=PEM_X509_INFO_read_bio(in,NULL,NULL,NULL))) {
-		BIO_printf(bio_err,"error reading the file, %s\n",certfile);
-		goto end;
-	}
-
-	/* scan over it and pull out the certs */
-	while (sk_X509_INFO_num(sk))
-		{
-		xi=sk_X509_INFO_shift(sk);
-		if (xi->x509 != NULL)
-			{
-			sk_X509_push(stack,xi->x509);
-			xi->x509=NULL;
-			}
-		X509_INFO_free(xi);
-		}
-	if(!sk_X509_num(stack)) {
-		BIO_printf(bio_err,"no certificates in file, %s\n",certfile);
-		sk_X509_free(stack);
-		goto end;
-	}
-	ret=stack;
-end:
-	BIO_free(in);
-	sk_X509_INFO_free(sk);
-	return(ret);
-	}
-
 static int MS_CALLBACK cb(int ok, X509_STORE_CTX *ctx)
 	{
-	char buf[256];
+	int cert_error = X509_STORE_CTX_get_error(ctx);
+	X509 *current_cert = X509_STORE_CTX_get_current_cert(ctx);
 
 	if (!ok)
 		{
-		if (ctx->current_cert)
+		if (current_cert)
 			{
-			X509_NAME_oneline(
-				X509_get_subject_name(ctx->current_cert),buf,
-				sizeof buf);
-			printf("%s\n",buf);
+			X509_NAME_print_ex_fp(stdout,
+				X509_get_subject_name(current_cert),
+				0, XN_FLAG_ONELINE);
+			printf("\n");
+			}
+		printf("%serror %d at %d depth lookup:%s\n",
+			X509_STORE_CTX_get0_parent_ctx(ctx) ? "[CRL path]" : "",
+			cert_error,
+			X509_STORE_CTX_get_error_depth(ctx),
+			X509_verify_cert_error_string(cert_error));
+		switch(cert_error)
+			{
+			case X509_V_ERR_NO_EXPLICIT_POLICY:
+				policies_print(NULL, ctx);
+			case X509_V_ERR_CERT_HAS_EXPIRED:
+
+			/* since we are just checking the certificates, it is
+			 * ok if they are self signed. But we should still warn
+			 * the user.
+			 */
+
+			case X509_V_ERR_DEPTH_ZERO_SELF_SIGNED_CERT:
+			/* Continue after extension errors too */
+			case X509_V_ERR_INVALID_CA:
+			case X509_V_ERR_INVALID_NON_CA:
+			case X509_V_ERR_PATH_LENGTH_EXCEEDED:
+			case X509_V_ERR_INVALID_PURPOSE:
+			case X509_V_ERR_CRL_HAS_EXPIRED:
+			case X509_V_ERR_CRL_NOT_YET_VALID:
+			case X509_V_ERR_UNHANDLED_CRITICAL_EXTENSION:
+			ok = 1;
+
 			}
-		printf("error %d at %d depth lookup:%s\n",ctx->error,
-			ctx->error_depth,
-			X509_verify_cert_error_string(ctx->error));
-		if (ctx->error == X509_V_ERR_CERT_HAS_EXPIRED) ok=1;
-		/* since we are just checking the certificates, it is
-		 * ok if they are self signed. But we should still warn
-		 * the user.
- 		 */
-		if (ctx->error == X509_V_ERR_DEPTH_ZERO_SELF_SIGNED_CERT) ok=1;
-		/* Continue after extension errors too */
-		if (ctx->error == X509_V_ERR_INVALID_CA) ok=1;
-		if (ctx->error == X509_V_ERR_INVALID_NON_CA) ok=1;
-		if (ctx->error == X509_V_ERR_PATH_LENGTH_EXCEEDED) ok=1;
-		if (ctx->error == X509_V_ERR_INVALID_PURPOSE) ok=1;
-		if (ctx->error == X509_V_ERR_DEPTH_ZERO_SELF_SIGNED_CERT) ok=1;
-		if (ctx->error == X509_V_ERR_CRL_HAS_EXPIRED) ok=1;
-		if (ctx->error == X509_V_ERR_CRL_NOT_YET_VALID) ok=1;
-		if (ctx->error == X509_V_ERR_UNHANDLED_CRITICAL_EXTENSION) ok=1;
 
-		if (ctx->error == X509_V_ERR_NO_EXPLICIT_POLICY)
-			policies_print(NULL, ctx);
 		return ok;
 
 		}
-	if ((ctx->error == X509_V_OK) && (ok == 2))
+	if (cert_error == X509_V_OK && ok == 2)
 		policies_print(NULL, ctx);
 	if (!v_verbose)
 		ERR_clear_error();

apps/vms_decc_init.c

@@ -0,0 +1,188 @@
+#if defined( __VMS) && !defined( OPENSSL_NO_DECC_INIT) && \
+ defined( __DECC) && !defined( __VAX) && (__CRTL_VER >= 70301000)
+# define USE_DECC_INIT 1
+#endif
+
+#ifdef USE_DECC_INIT
+
+/*
+ * 2010-04-26 SMS.
+ *
+ *----------------------------------------------------------------------
+ *
+ *       decc_init()
+ *
+ *    On non-VAX systems, uses LIB$INITIALIZE to set a collection of C
+ *    RTL features without using the DECC$* logical name method.
+ *
+ *----------------------------------------------------------------------
+ */
+
+#include <stdio.h>
+#include <stdlib.h>
+#include <unixlib.h>
+
+
+/* Global storage. */
+
+/* Flag to sense if decc_init() was called. */
+
+int decc_init_done = -1;
+
+
+/* Structure to hold a DECC$* feature name and its desired value. */
+
+typedef struct
+{
+    char *name;
+    int value;
+} decc_feat_t;
+
+
+/* Array of DECC$* feature names and their desired values.
+ * Note: DECC$ARGV_PARSE_STYLE is the urgent one.
+ */
+
+decc_feat_t decc_feat_array[] =
+{
+ /* Preserve command-line case with SET PROCESS/PARSE_STYLE=EXTENDED */
+ { "DECC$ARGV_PARSE_STYLE", 1 },
+
+ /* Preserve case for file names on ODS5 disks. */
+ { "DECC$EFS_CASE_PRESERVE", 1 },
+
+ /* Enable multiple dots (and most characters) in ODS5 file names,
+  * while preserving VMS-ness of ";version".
+  */
+ { "DECC$EFS_CHARSET", 1 },
+
+ /* List terminator. */
+ { (char *)NULL, 0 }
+};
+
+
+/* LIB$INITIALIZE initialization function. */
+
+static void decc_init( void)
+{
+    char *openssl_debug_decc_init;
+    int verbose = 0;
+    int feat_index;
+    int feat_value;
+    int feat_value_max;
+    int feat_value_min;
+    int i;
+    int sts;
+
+    /* Get debug option. */
+    openssl_debug_decc_init = getenv( "OPENSSL_DEBUG_DECC_INIT");
+    if (openssl_debug_decc_init != NULL)
+    {
+        verbose = strtol( openssl_debug_decc_init, NULL, 10);
+        if (verbose <= 0)
+        {
+            verbose = 1;
+        }
+    }
+
+    /* Set the global flag to indicate that LIB$INITIALIZE worked. */
+    decc_init_done = 1;
+
+    /* Loop through all items in the decc_feat_array[]. */
+
+    for (i = 0; decc_feat_array[ i].name != NULL; i++)
+    {
+        /* Get the feature index. */
+        feat_index = decc$feature_get_index( decc_feat_array[ i].name);
+        if (feat_index >= 0)
+        {
+            /* Valid item.  Collect its properties. */
+            feat_value = decc$feature_get_value( feat_index, 1);
+            feat_value_min = decc$feature_get_value( feat_index, 2);
+            feat_value_max = decc$feature_get_value( feat_index, 3);
+
+            /* Check the validity of our desired value. */
+            if ((decc_feat_array[ i].value >= feat_value_min) &&
+             (decc_feat_array[ i].value <= feat_value_max))
+            {
+                /* Valid value.  Set it if necessary. */
+                if (feat_value != decc_feat_array[ i].value)
+                {
+                    sts = decc$feature_set_value( feat_index,
+                     1,
+                     decc_feat_array[ i].value);
+
+                     if (verbose > 1)
+                     {
+                         fprintf( stderr, " %s = %d, sts = %d.\n",
+                          decc_feat_array[ i].name,
+                          decc_feat_array[ i].value,
+                          sts);
+                     }
+                }
+            }
+            else
+            {
+                /* Invalid DECC feature value. */
+                fprintf( stderr,
+                 " INVALID DECC$FEATURE VALUE, %d: %d <= %s <= %d.\n",
+                 feat_value,
+                 feat_value_min, decc_feat_array[ i].name, feat_value_max);
+            }
+        }
+        else
+        {
+            /* Invalid DECC feature name. */
+            fprintf( stderr,
+             " UNKNOWN DECC$FEATURE: %s.\n", decc_feat_array[ i].name);
+        }
+    }
+
+    if (verbose > 0)
+    {
+        fprintf( stderr, " DECC_INIT complete.\n");
+    }
+}
+
+/* Get "decc_init()" into a valid, loaded LIB$INITIALIZE PSECT. */
+
+#pragma nostandard
+
+/* Establish the LIB$INITIALIZE PSECTs, with proper alignment and
+ * other attributes.  Note that "nopic" is significant only on VAX.
+ */
+#pragma extern_model save
+
+#if __INITIAL_POINTER_SIZE == 64
+# define PSECT_ALIGN 3
+#else
+# define PSECT_ALIGN 2
+#endif
+
+#pragma extern_model strict_refdef "LIB$INITIALIZ" PSECT_ALIGN, nopic, nowrt
+const int spare[ 8] = { 0 };
+
+#pragma extern_model strict_refdef "LIB$INITIALIZE" PSECT_ALIGN, nopic, nowrt
+void (*const x_decc_init)() = decc_init;
+
+#pragma extern_model restore
+
+/* Fake reference to ensure loading the LIB$INITIALIZE PSECT. */
+
+#pragma extern_model save
+
+int LIB$INITIALIZE( void);
+
+#pragma extern_model strict_refdef
+int dmy_lib$initialize = (int) LIB$INITIALIZE;
+
+#pragma extern_model restore
+
+#pragma standard
+
+#else /* def USE_DECC_INIT */
+
+/* Dummy code to avoid a %CC-W-EMPTYFILE complaint. */
+int decc_init_dummy( void);
+
+#endif /* def USE_DECC_INIT */

apps/x509.c

@@ -99,7 +99,13 @@ static const char *x509_usage[]={
 " -passin arg     - private key password source\n",
 " -serial         - print serial number value\n",
 " -subject_hash   - print subject hash value\n",
+#ifndef OPENSSL_NO_MD5
+" -subject_hash_old   - print old-style (MD5) subject hash value\n",
+#endif
 " -issuer_hash    - print issuer hash value\n",
+#ifndef OPENSSL_NO_MD5
+" -issuer_hash_old    - print old-style (MD5) issuer hash value\n",
+#endif
 " -hash           - synonym for -subject_hash\n",
 " -subject        - print subject DN\n",
 " -issuer         - print issuer DN\n",
@@ -114,7 +120,7 @@ static const char *x509_usage[]={
 " -alias          - output certificate alias\n",
 " -noout          - no certificate output\n",
 " -ocspid         - print OCSP hash values for the subject name and public key\n",
-" -ocspurl        - print OCSP Responder URL(s)\n",
+" -ocsp_uri       - print OCSP Responder URL(s)\n",
 " -trustout       - output a \"trusted\" certificate\n",
 " -clrtrust       - clear all trusted purposes\n",
 " -clrreject      - clear all rejected purposes\n",
@@ -151,9 +157,10 @@ static int MS_CALLBACK callb(int ok, X509_STORE_CTX *ctx);
 static int sign (X509 *x, EVP_PKEY *pkey,int days,int clrext, const EVP_MD *digest,
 						CONF *conf, char *section);
 static int x509_certify (X509_STORE *ctx,char *CAfile,const EVP_MD *digest,
-			 X509 *x,X509 *xca,EVP_PKEY *pkey,char *serial,
-			 int create,int days, int clrext, CONF *conf, char *section,
-						ASN1_INTEGER *sno);
+			 X509 *x,X509 *xca,EVP_PKEY *pkey,
+			 STACK_OF(OPENSSL_STRING) *sigopts,
+			 char *serial, int create ,int days, int clrext,
+			 CONF *conf, char *section, ASN1_INTEGER *sno);
 static int purpose_print(BIO *bio, X509 *cert, X509_PURPOSE *pt);
 static int reqfile=0;
 
@@ -166,6 +173,7 @@ int MAIN(int argc, char **argv)
 	X509_REQ *req=NULL;
 	X509 *x=NULL,*xca=NULL;
 	ASN1_OBJECT *objtmp;
+	STACK_OF(OPENSSL_STRING) *sigopts = NULL;
 	EVP_PKEY *Upkey=NULL,*CApkey=NULL;
 	ASN1_INTEGER *sno = NULL;
 	int i,num,badops=0;
@@ -179,6 +187,9 @@ int MAIN(int argc, char **argv)
 	int text=0,serial=0,subject=0,issuer=0,startdate=0,enddate=0;
 	int next_serial=0;
 	int subject_hash=0,issuer_hash=0,ocspid=0;
+#ifndef OPENSSL_NO_MD5
+	int subject_hash_old=0,issuer_hash_old=0;
+#endif
 	int noout=0,sign_flag=0,CA_flag=0,CA_createserial=0,email=0;
 	int ocsp_uri=0;
 	int trustout=0,clrtrust=0,clrreject=0,aliasout=0,clrext=0;
@@ -225,7 +236,7 @@ int MAIN(int argc, char **argv)
 
 	ctx=X509_STORE_new();
 	if (ctx == NULL) goto end;
-	X509_STORE_set_verify_cb_func(ctx,callb);
+	X509_STORE_set_verify_cb(ctx,callb);
 
 	argc--;
 	argv++;
@@ -262,6 +273,15 @@ int MAIN(int argc, char **argv)
 			if (--argc < 1) goto bad;
 			CAkeyformat=str2fmt(*(++argv));
 			}
+		else if (strcmp(*argv,"-sigopt") == 0)
+			{
+			if (--argc < 1)
+				goto bad;
+			if (!sigopts)
+				sigopts = sk_OPENSSL_STRING_new_null();
+			if (!sigopts || !sk_OPENSSL_STRING_push(sigopts, *(++argv)))
+				goto bad;
+			}
 		else if (strcmp(*argv,"-days") == 0)
 			{
 			if (--argc < 1) goto bad;
@@ -397,8 +417,16 @@ int MAIN(int argc, char **argv)
 		else if (strcmp(*argv,"-hash") == 0
 			|| strcmp(*argv,"-subject_hash") == 0)
 			subject_hash= ++num;
+#ifndef OPENSSL_NO_MD5
+		else if (strcmp(*argv,"-subject_hash_old") == 0)
+			subject_hash_old= ++num;
+#endif
 		else if (strcmp(*argv,"-issuer_hash") == 0)
 			issuer_hash= ++num;
+#ifndef OPENSSL_NO_MD5
+		else if (strcmp(*argv,"-issuer_hash_old") == 0)
+			issuer_hash_old= ++num;
+#endif
 		else if (strcmp(*argv,"-subject") == 0)
 			subject= ++num;
 		else if (strcmp(*argv,"-issuer") == 0)
@@ -539,7 +567,6 @@ bad:
 	if (reqfile)
 		{
 		EVP_PKEY *pkey;
-		X509_CINF *ci;
 		BIO *in;
 
 		if (!sign_flag && !CA_flag)
@@ -607,7 +634,6 @@ bad:
 		print_name(bio_err, "subject=", X509_REQ_get_subject_name(req), nmflag);
 
 		if ((x=X509_new()) == NULL) goto end;
-		ci=x->cert_info;
 
 		if (sno == NULL)
 			{
@@ -626,7 +652,7 @@ bad:
 		if (!X509_set_subject_name(x,req->req_info->subject)) goto end;
 
 		X509_gmtime_adj(X509_get_notBefore(x),0);
-	        X509_gmtime_adj(X509_get_notAfter(x),(long)60*60*24*days);
+	        X509_time_adj_ex(X509_get_notAfter(x),days, 0, NULL);
 
 		pkey = X509_REQ_get_pubkey(req);
 		X509_set_pubkey(x,pkey);
@@ -738,14 +764,14 @@ bad:
 			else if ((email == i) || (ocsp_uri == i))
 				{
 				int j;
-				STACK_OF(STRING) *emlst;
+				STACK_OF(OPENSSL_STRING) *emlst;
 				if (email == i)
 					emlst = X509_get1_email(x);
 				else
 					emlst = X509_get1_ocsp(x);
-				for (j = 0; j < sk_STRING_num(emlst); j++)
+				for (j = 0; j < sk_OPENSSL_STRING_num(emlst); j++)
 					BIO_printf(STDout, "%s\n",
-						   sk_STRING_value(emlst, j));
+						   sk_OPENSSL_STRING_value(emlst, j));
 				X509_email_free(emlst);
 				}
 			else if (aliasout == i)
@@ -759,10 +785,22 @@ bad:
 				{
 				BIO_printf(STDout,"%08lx\n",X509_subject_name_hash(x));
 				}
+#ifndef OPENSSL_NO_MD5
+			else if (subject_hash_old == i)
+				{
+				BIO_printf(STDout,"%08lx\n",X509_subject_name_hash_old(x));
+				}
+#endif
 			else if (issuer_hash == i)
 				{
 				BIO_printf(STDout,"%08lx\n",X509_issuer_name_hash(x));
 				}
+#ifndef OPENSSL_NO_MD5
+			else if (issuer_hash_old == i)
+				{
+				BIO_printf(STDout,"%08lx\n",X509_issuer_name_hash_old(x));
+				}
+#endif
 			else if (pprint == i)
 				{
 				X509_PURPOSE *ptmp;
@@ -943,7 +981,8 @@ bad:
 				
 				assert(need_rand);
 				if (!x509_certify(ctx,CAfile,digest,x,xca,
-					CApkey, CAserial,CA_createserial,days, clrext,
+					CApkey, sigopts,
+					CAserial,CA_createserial,days, clrext,
 					extconf, extsect, sno))
 					goto end;
 				}
@@ -960,7 +999,7 @@ bad:
 				else
 					{
 					pk=load_key(bio_err,
-						keyfile, FORMAT_PEM, 0,
+						keyfile, keyformat, 0,
 						passin, e, "request key");
 					if (pk == NULL) goto end;
 					}
@@ -1054,6 +1093,8 @@ end:
 	X509_free(xca);
 	EVP_PKEY_free(Upkey);
 	EVP_PKEY_free(CApkey);
+	if (sigopts)
+		sk_OPENSSL_STRING_free(sigopts);
 	X509_REQ_free(rq);
 	ASN1_INTEGER_free(sno);
 	sk_ASN1_OBJECT_pop_free(trust, ASN1_OBJECT_free);
@@ -1104,8 +1145,11 @@ static ASN1_INTEGER *x509_load_serial(char *CAfile, char *serialfile, int create
 	}
 
 static int x509_certify(X509_STORE *ctx, char *CAfile, const EVP_MD *digest,
-	     X509 *x, X509 *xca, EVP_PKEY *pkey, char *serialfile, int create,
-	     int days, int clrext, CONF *conf, char *section, ASN1_INTEGER *sno)
+	     		X509 *x, X509 *xca, EVP_PKEY *pkey,
+			STACK_OF(OPENSSL_STRING) *sigopts,
+	  		char *serialfile, int create,
+	     		int days, int clrext, CONF *conf, char *section,
+			ASN1_INTEGER *sno)
 	{
 	int ret=0;
 	ASN1_INTEGER *bs=NULL;
@@ -1130,6 +1174,7 @@ static int x509_certify(X509_STORE *ctx, char *CAfile, const EVP_MD *digest,
 	/* NOTE: this certificate can/should be self signed, unless it was
 	 * a certificate request in which case it is not. */
 	X509_STORE_CTX_set_cert(&xsc,x);
+	X509_STORE_CTX_set_flags(&xsc, X509_V_FLAG_CHECK_SS_SIGNATURE);
 	if (!reqfile && X509_verify_cert(&xsc) <= 0)
 		goto end;
 
@@ -1146,7 +1191,7 @@ static int x509_certify(X509_STORE *ctx, char *CAfile, const EVP_MD *digest,
 		goto end;
 
 	/* hardwired expired */
-	if (X509_gmtime_adj(X509_get_notAfter(x),(long)60*60*24*days) == NULL)
+	if (X509_time_adj_ex(X509_get_notAfter(x),days, 0, NULL) == NULL)
 		goto end;
 
 	if (clrext)
@@ -1163,7 +1208,8 @@ static int x509_certify(X509_STORE *ctx, char *CAfile, const EVP_MD *digest,
                 if (!X509V3_EXT_add_nconf(conf, &ctx2, section, x)) goto end;
 		}
 
-	if (!X509_sign(x,pkey,digest)) goto end;
+	if (!do_X509_sign(bio_err, x, pkey, digest, sigopts))
+		goto end;
 	ret=1;
 end:
 	X509_STORE_CTX_cleanup(&xsc);

config

@@ -48,10 +48,10 @@ done
 
 # First get uname entries that we use below
 
-MACHINE=`(uname -m) 2>/dev/null` || MACHINE="unknown"
-RELEASE=`(uname -r) 2>/dev/null` || RELEASE="unknown"
-SYSTEM=`(uname -s) 2>/dev/null`  || SYSTEM="unknown"
-VERSION=`(uname -v) 2>/dev/null` || VERSION="unknown"
+[ "$MACHINE" ] || MACHINE=`(uname -m) 2>/dev/null` || MACHINE="unknown"
+[ "$RELEASE" ] || RELEASE=`(uname -r) 2>/dev/null` || RELEASE="unknown"
+[ "$SYSTEM" ] || SYSTEM=`(uname -s) 2>/dev/null`  || SYSTEM="unknown"
+[ "$BUILD" ] || VERSION=`(uname -v) 2>/dev/null` || VERSION="unknown"
 
 
 # Now test for ISC and SCO, since it is has a braindamaged uname.
@@ -370,6 +370,10 @@ case "${SYSTEM}:${RELEASE}:${VERSION}:${MACHINE}" in
     NONSTOP_KERNEL*)
        echo "nsr-tandem-nsk"; exit 0;
        ;;
+
+    vxworks*)
+       echo "${MACHINE}-whatever-vxworks"; exit 0;
+       ;;
 esac
 
 #
@@ -407,23 +411,18 @@ exit 0
 # this is where the translation occurs into SSLeay terms
 # ---------------------------------------------------------------------------
 
-GCCVER=`(gcc -dumpversion) 2>/dev/null`
-if [ "$GCCVER" != "" ]; then
-  # then strip off whatever prefix egcs prepends the number with...
-  # Hopefully, this will work for any future prefixes as well.
-  GCCVER=`echo $GCCVER | LC_ALL=C sed 's/^[a-zA-Z]*\-//'`
-  # Since gcc 3.1 gcc --version behaviour has changed.  gcc -dumpversion
-  # does give us what we want though, so we use that.  We just just the
-  # major and minor version numbers.
-  # peak single digit before and after first dot, e.g. 2.95.1 gives 29
-  GCCVER=`echo $GCCVER | sed 's/\([0-9]\)\.\([0-9]\).*/\1\2/'`
-fi
-
 # Only set CC if not supplied already
-if [ -z "$CC" ]; then
-# figure out if gcc is available and if so we use it otherwise
-# we fallback to whatever cc does on the system
+if [ -z "$CROSS_COMPILE$CC" ]; then
+  GCCVER=`sh -c "gcc -dumpversion" 2>/dev/null`
   if [ "$GCCVER" != "" ]; then
+    # then strip off whatever prefix egcs prepends the number with...
+    # Hopefully, this will work for any future prefixes as well.
+    GCCVER=`echo $GCCVER | LC_ALL=C sed 's/^[a-zA-Z]*\-//'`
+    # Since gcc 3.1 gcc --version behaviour has changed.  gcc -dumpversion
+    # does give us what we want though, so we use that.  We just just the
+    # major and minor version numbers.
+    # peak single digit before and after first dot, e.g. 2.95.1 gives 29
+    GCCVER=`echo $GCCVER | sed 's/\([0-9]\)\.\([0-9]\).*/\1\2/'`
     CC=gcc
   else
     CC=cc
@@ -496,6 +495,12 @@ echo Operating system: $GUESSOS
 # script above so we end up with values in vars but that would take
 # more time that I want to waste at the moment
 case "$GUESSOS" in
+  uClinux*64*)
+    OUT=uClinux-dist64
+	;;
+  uClinux*)
+    OUT=uClinux-dist
+	;;
   mips2-sgi-irix)
 	CPU=`(hinv -t cpu) 2>/dev/null | head -1 | sed 's/^CPU:[^R]*R\([0-9]*\).*/\1/'`
 	CPU=${CPU:-0}
@@ -533,7 +538,7 @@ case "$GUESSOS" in
   ppc-apple-rhapsody) OUT="rhapsody-ppc-cc" ;;
   ppc-apple-darwin*)
 	ISA64=`(sysctl -n hw.optional.64bitops) 2>/dev/null`
-	if [ "$ISA64" = "1" ]; then
+	if [ "$ISA64" = "1" -a -z "$KERNEL_BITS" ]; then
 	    echo "WARNING! If you wish to build 64-bit library, then you have to"
 	    echo "         invoke './Configure darwin64-ppc-cc' *manually*."
 	    if [ "$TEST" = "false" -a -t 1 ]; then
@@ -541,10 +546,14 @@ case "$GUESSOS" in
 	      (trap "stty `stty -g`" 2 0; stty -icanon min 0 time 50; read waste) <&1
 	    fi
 	fi
-	OUT="darwin-ppc-cc" ;;
+	if [ "$ISA64" = "1" -a "$KERNEL_BITS" = "64" ]; then
+	    OUT="darwin64-ppc-cc"
+	else
+	    OUT="darwin-ppc-cc"
+	fi ;;
   i?86-apple-darwin*)
 	ISA64=`(sysctl -n hw.optional.x86_64) 2>/dev/null`
-	if [ "$ISA64" = "1" ]; then
+	if [ "$ISA64" = "1" -a -z "$KERNEL_BITS" ]; then
 	    echo "WARNING! If you wish to build 64-bit library, then you have to"
 	    echo "         invoke './Configure darwin64-x86_64-cc' *manually*."
 	    if [ "$TEST" = "false" -a -t 1 ]; then
@@ -552,7 +561,17 @@ case "$GUESSOS" in
 	      (trap "stty `stty -g`" 2 0; stty -icanon min 0 time 50; read waste) <&1
 	    fi
 	fi
-	OUT="darwin-i386-cc" ;;
+	if [ "$ISA64" = "1" -a "$KERNEL_BITS" = "64" ]; then
+	    OUT="darwin64-x86_64-cc"
+	else
+	    OUT="darwin-i386-cc"
+	fi ;;
+  armv6+7-*-iphoneos)
+	options="$options -arch%20armv6 -arch%20armv7"
+	OUT="iphoneos-cross" ;;
+  *-*-iphoneos)
+	options="$options -arch%20${MACHINE}"
+	OUT="iphoneos-cross" ;;
   alpha-*-linux2)
         ISA=`awk '/cpu model/{print$4;exit(0);}' /proc/cpuinfo`
 	case ${ISA:-generic} in
@@ -577,6 +596,11 @@ case "$GUESSOS" in
 	OUT="linux-ppc"
 	;;
   ppc-*-linux2) OUT="linux-ppc" ;;
+  ppc60x-*-vxworks*) OUT="vxworks-ppc60x" ;;
+  ppcgen-*-vxworks*) OUT="vxworks-ppcgen" ;;
+  pentium-*-vxworks*) OUT="vxworks-pentium" ;;
+  simlinux-*-vxworks*) OUT="vxworks-simlinux" ;;
+  mips-*-vxworks*) OUT="vxworks-mips";;
   ia64-*-linux?) OUT="linux-ia64" ;;
   sparc64-*-linux2)
 	echo "WARNING! If you *know* that your GNU C supports 64-bit/V9 ABI"
@@ -618,12 +642,24 @@ case "$GUESSOS" in
 	options="$options -DB_ENDIAN -mschedule=$CPUSCHEDULE -march=$CPUARCH"
 	OUT="linux-generic32" ;;
   armv[1-3]*-*-linux2) OUT="linux-generic32" ;;
+  armv[7-9]*-*-linux2) OUT="linux-armv4"; options="$options -march=armv7-a" ;;
   arm*-*-linux2) OUT="linux-armv4" ;;
   sh*b-*-linux2) OUT="linux-generic32"; options="$options -DB_ENDIAN" ;;
   sh*-*-linux2)  OUT="linux-generic32"; options="$options -DL_ENDIAN" ;;
   m68k*-*-linux2) OUT="linux-generic32"; options="$options -DB_ENDIAN" ;;
   s390-*-linux2) OUT="linux-generic32"; options="$options -DB_ENDIAN" ;;
-  s390x-*-linux2) OUT="linux-s390x" ;;
+  s390x-*-linux2)
+	# To be uncommented when glibc bug is fixed, see Configure...
+	#if egrep -e '^features.* highgprs' /proc/cpuinfo >/dev/null ; then
+	#  echo "WARNING! If you wish to build \"highgprs\" 32-bit library, then you"
+	#  echo "         have to invoke './Configure linux32-s390x' *manually*."
+	#  if [ "$TEST" = "false" -a -t -1 ]; then
+	#    echo "         You have about 5 seconds to press Ctrl-C to abort."
+	#    (trap "stty `stty -g`" 2 0; stty -icanon min 0 time 50; read waste) <&1
+	#  fi
+	#fi
+	OUT="linux64-s390x"
+	;;
   x86_64-*-linux?) OUT="linux-x86_64" ;;
   *86-*-linux2) OUT="linux-elf"
 	if [ "$GCCVER" -gt 28 ]; then
@@ -642,7 +678,7 @@ case "$GUESSOS" in
   sun4[uv]*-*-solaris2)
 	OUT="solaris-sparcv9-$CC"
 	ISA64=`(isalist) 2>/dev/null | grep sparcv9`
-	if [ "$ISA64" != "" ]; then
+	if [ "$ISA64" != "" -a "$KERNEL_BITS" = "" ]; then
 	    if [ "$CC" = "cc" -a $CCVER -ge 50 ]; then
 		echo "WARNING! If you wish to build 64-bit library, then you have to"
 		echo "         invoke './Configure solaris64-sparcv9-cc' *manually*."
@@ -672,13 +708,16 @@ case "$GUESSOS" in
 		fi
 	    fi
 	fi
+	if [ "$ISA64" != "" -a "$KERNEL_BITS" = "64" ]; then
+	    OUT="solaris64-sparcv9-$CC"
+	fi
 	;;
   sun4m-*-solaris2)	OUT="solaris-sparcv8-$CC" ;;
   sun4d-*-solaris2)	OUT="solaris-sparcv8-$CC" ;;
   sun4*-*-solaris2)	OUT="solaris-sparcv7-$CC" ;;
   *86*-*-solaris2)
 	ISA64=`(isalist) 2>/dev/null | grep amd64`
-	if [ "$ISA64" != "" ]; then
+	if [ "$ISA64" != "" -a ${KERNEL_BITS:-64} -eq 64 ]; then
 	    OUT="solaris64-x86_64-$CC"
 	else
 	    OUT="solaris-x86-$CC"
@@ -730,20 +769,17 @@ case "$GUESSOS" in
 	if [ $CC = "gcc" -a $GCC_BITS = "64" ]; then
 	    OUT="hpux64-parisc2-gcc"
 	fi
-	KERNEL_BITS=`(getconf KERNEL_BITS) 2>/dev/null`
+	[ "$KERNEL_BITS" ] || KERNEL_BITS=`(getconf KERNEL_BITS) 2>/dev/null`
 	KERNEL_BITS=${KERNEL_BITS:-32}
 	CPU_VERSION=`(getconf CPU_VERSION) 2>/dev/null`
 	CPU_VERSION=${CPU_VERSION:-0}
 	# See <sys/unistd.h> for further info on CPU_VERSION.
 	if   [ $CPU_VERSION -ge 768 ]; then	# IA-64 CPU
-	     echo "WARNING! 64-bit ABI is the default configured ABI on HP-UXi."
-	     echo "         If you wish to build 32-bit library, the you have to"
-	     echo "         invoke './Configure hpux-ia64-cc' *manually*."
-	     if [ "$TEST" = "false" -a -t 1 ]; then
-		echo "         You have about 5 seconds to press Ctrl-C to abort."
-		(trap "stty `stty -g`" 2 0; stty -icanon min 0 time 50; read waste) <&1
-	     fi
-	     OUT="hpux64-ia64-cc"
+	     if [ $KERNEL_BITS -eq 64 -a "$CC" = "cc" ]; then
+	        OUT="hpux64-ia64-cc"
+             else
+	        OUT="hpux-ia64-cc"
+             fi
 	elif [ $CPU_VERSION -ge 532 ]; then	# PA-RISC 2.x CPU
 	     OUT=${OUT:-"hpux-parisc2-${CC}"}
 	     if [ $KERNEL_BITS -eq 64 -a "$CC" = "cc" ]; then
@@ -764,11 +800,15 @@ case "$GUESSOS" in
 	options="$options -D_REENTRANT" ;;
   *-hpux)	OUT="hpux-parisc-$CC" ;;
   *-aix)
-	KERNEL_BITS=`(getconf KERNEL_BITMODE) 2>/dev/null`
+	[ "$KERNEL_BITS" ] || KERNEL_BITS=`(getconf KERNEL_BITMODE) 2>/dev/null`
 	KERNEL_BITS=${KERNEL_BITS:-32}
 	OBJECT_MODE=${OBJECT_MODE:-32}
 	if [ "$CC" = "gcc" ]; then
 	    OUT="aix-gcc"
+          if [ $OBJECT_MODE -eq 64 ]; then
+            echo 'Your $OBJECT_MODE was found to be set to 64'
+            OUT="aix64-gcc"
+          fi
 	elif [ $OBJECT_MODE -eq 64 ]; then
 	    echo 'Your $OBJECT_MODE was found to be set to 64' 
 	    OUT="aix64-cc"
@@ -798,6 +838,10 @@ case "$GUESSOS" in
   j90-cray-unicos) OUT="cray-j90" ;;
   nsr-tandem-nsk) OUT="tandem-c89" ;;
   beos-*) OUT="$GUESSOS" ;;
+  x86pc-*-qnx6) OUT="QNX6-i386" ;;
+  *-*-qnx6) OUT="QNX6" ;;
+  x86-*-android|i?86-*-android) OUT="android-x86" ;;
+  armv[7-9]*-*-android) OUT="android-armv7" ;;
   *) OUT=`echo $GUESSOS | awk -F- '{print $3}'`;;
 esac
 
@@ -813,6 +857,12 @@ esac
 #  options="$options -DATALLA"
 #fi
 
+if expr "$options" : '.*no\-asm' > /dev/null; then :; else
+  sh -c "$CROSS_COMPILE${CC:-gcc} -Wa,--help -c -o /tmp/null.$$.o -x assembler /dev/null && rm /tmp/null.$$.o" 2>&1 | \
+  grep \\--noexecstack >/dev/null && \
+  options="$options -Wa,--noexecstack"
+fi
+
 # gcc < 2.8 does not support -march=ultrasparc
 if [ "$OUT" = solaris-sparcv9-gcc -a $GCCVER -lt 28 ]
 then

crypto/LPdir_vms.c

@@ -40,22 +40,18 @@
 #ifndef LPDIR_H
 #include "LPdir.h"
 #endif
+#include "vms_rms.h"
 
-/* Because some compiler options hide this macor */
+/* Some compiler options hide EVMSERR. */
 #ifndef EVMSERR
-#define EVMSERR		65535  /* error for non-translatable VMS errors */
+# define EVMSERR	65535  /* error for non-translatable VMS errors */
 #endif
 
 struct LP_dir_context_st
 {
   unsigned long VMS_context;
-#ifdef NAML$C_MAXRSS
-  char filespec[NAML$C_MAXRSS+1];
-  char result[NAML$C_MAXRSS+1];
-#else
-  char filespec[256];
-  char result[256];
-#endif
+  char filespec[ NAMX_MAXRSS+ 1];
+  char result[ NAMX_MAXRSS+ 1];
   struct dsc$descriptor_d filespec_dsc;
   struct dsc$descriptor_d result_dsc;
 };
@@ -66,6 +62,16 @@ const char *LP_find_file(LP_DIR_CTX **ctx, const char *directory)
   char *p, *r;
   size_t l;
   unsigned long flags = 0;
+
+/* Arrange 32-bit pointer to (copied) string storage, if needed. */
+#if __INITIAL_POINTER_SIZE == 64
+# pragma pointer_size save
+# pragma pointer_size 32
+        char *ctx_filespec_32p;
+# pragma pointer_size restore
+        char ctx_filespec_32[ NAMX_MAXRSS+ 1];
+#endif /* __INITIAL_POINTER_SIZE == 64 */
+
 #ifdef NAML$C_MAXRSS
   flags |= LIB$M_FIL_LONG_NAMES;
 #endif
@@ -93,13 +99,7 @@ const char *LP_find_file(LP_DIR_CTX **ctx, const char *directory)
 
       filespeclen += 4;		/* "*.*;" */
 
-      if (filespeclen >
-#ifdef NAML$C_MAXRSS
-	  NAML$C_MAXRSS
-#else
-	  255
-#endif
-	  )
+      if (filespeclen > NAMX_MAXRSS)
 	{
 	  errno = ENAMETOOLONG;
 	  return 0;
@@ -115,14 +115,21 @@ const char *LP_find_file(LP_DIR_CTX **ctx, const char *directory)
 
       strcpy((*ctx)->filespec,directory);
       strcat((*ctx)->filespec,"*.*;");
+
+/* Arrange 32-bit pointer to (copied) string storage, if needed. */
+#if __INITIAL_POINTER_SIZE == 64
+# define CTX_FILESPEC ctx_filespec_32p
+        /* Copy the file name to storage with a 32-bit pointer. */
+        ctx_filespec_32p = ctx_filespec_32;
+        strcpy( ctx_filespec_32p, (*ctx)->filespec);
+#else /* __INITIAL_POINTER_SIZE == 64 */
+# define CTX_FILESPEC (*ctx)->filespec
+#endif /* __INITIAL_POINTER_SIZE == 64 [else] */
+
       (*ctx)->filespec_dsc.dsc$w_length = filespeclen;
       (*ctx)->filespec_dsc.dsc$b_dtype = DSC$K_DTYPE_T;
       (*ctx)->filespec_dsc.dsc$b_class = DSC$K_CLASS_S;
-      (*ctx)->filespec_dsc.dsc$a_pointer = (*ctx)->filespec;
-      (*ctx)->result_dsc.dsc$w_length = 0;
-      (*ctx)->result_dsc.dsc$b_dtype = DSC$K_DTYPE_T;
-      (*ctx)->result_dsc.dsc$b_class = DSC$K_CLASS_D;
-      (*ctx)->result_dsc.dsc$a_pointer = 0;
+      (*ctx)->filespec_dsc.dsc$a_pointer = CTX_FILESPEC;
     }
 
   (*ctx)->result_dsc.dsc$w_length = 0;

crypto/Makefile

@@ -5,9 +5,9 @@
 DIR=		crypto
 TOP=		..
 CC=		cc
-INCLUDE=	-I. -I$(TOP) -I../include
+INCLUDE=	-I. -I$(TOP) -I../include $(ZLIB_INCLUDE)
 # INCLUDES targets sudbirs!
-INCLUDES=	-I.. -I../.. -I../asn1 -I../evp -I../../include
+INCLUDES=	-I.. -I../.. -I../modes -I../asn1 -I../evp -I../../include $(ZLIB_INCLUDE)
 CFLAG=		-g
 MAKEDEPPROG=	makedepend
 MAKEDEPEND=	$(TOP)/util/domd $(TOP) -MD $(MAKEDEPPROG)
@@ -34,8 +34,10 @@ GENERAL=Makefile README crypto-lib.com install.com
 
 LIB= $(TOP)/libcrypto.a
 SHARED_LIB= libcrypto$(SHLIB_EXT)
-LIBSRC=	cryptlib.c mem.c mem_clr.c mem_dbg.c cversion.c ex_data.c cpt_err.c ebcdic.c uid.c o_time.c o_str.c o_dir.c
-LIBOBJ= cryptlib.o mem.o mem_dbg.o cversion.o ex_data.o cpt_err.o ebcdic.o uid.o o_time.o o_str.o o_dir.o $(CPUID_OBJ)
+LIBSRC=	cryptlib.c mem.c mem_clr.c mem_dbg.c cversion.c ex_data.c cpt_err.c \
+	ebcdic.c uid.c o_time.c o_str.c o_dir.c o_fips.c o_init.c fips_ers.c
+LIBOBJ= cryptlib.o mem.o mem_dbg.o cversion.o ex_data.o cpt_err.o ebcdic.o \
+	uid.o o_time.o o_str.o o_dir.o o_fips.o o_init.o fips_ers.o $(CPUID_OBJ)
 
 SRC= $(LIBSRC)
 
@@ -67,14 +69,15 @@ applink.o:	$(TOP)/ms/applink.c
 uplink.o:	$(TOP)/ms/uplink.c applink.o
 	$(CC) $(CFLAGS) -c -o $@ $(TOP)/ms/uplink.c
 
-uplink-cof.s:	$(TOP)/ms/uplink.pl
-	$(PERL) $(TOP)/ms/uplink.pl coff > $@
+uplink-x86.s:	$(TOP)/ms/uplink-x86.pl
+	$(PERL) $(TOP)/ms/uplink-x86.pl $(PERLASM_SCHEME) > $@
 
-x86_64cpuid.s: x86_64cpuid.pl
-	$(PERL) x86_64cpuid.pl $(PERLASM_SCHEME) > $@
-ia64cpuid.s: ia64cpuid.S
-	$(CC) $(CFLAGS) -E ia64cpuid.S > $@
-ppccpuid.s:		ppccpuid.pl;	$(PERL) ppccpuid.pl $(PERLASM_SCHEME) $@
+x86_64cpuid.s: x86_64cpuid.pl;	$(PERL) x86_64cpuid.pl $(PERLASM_SCHEME) > $@
+ia64cpuid.s: ia64cpuid.S;	$(CC) $(CFLAGS) -E ia64cpuid.S > $@
+ppccpuid.s:	ppccpuid.pl;	$(PERL) ppccpuid.pl $(PERLASM_SCHEME) $@
+pariscid.s:	pariscid.pl;	$(PERL) pariscid.pl $(PERLASM_SCHEME) $@
+alphacpuid.s:	alphacpuid.pl
+	$(PERL) $< | $(CC) -E - | tee $@ > /dev/null
 
 testapps:
 	[ -z "$(THIS)" ] || (	if echo $(SDIRS) | fgrep ' des '; \
@@ -100,6 +103,7 @@ lib:	$(LIB)
 	@touch lib
 $(LIB):	$(LIBOBJ)
 	$(AR) $(LIB) $(LIBOBJ)
+	[ -z "$(FIPSLIBDIR)" ] || $(AR) $(LIB) $(FIPSLIBDIR)fipscanister.o
 	$(RANLIB) $(LIB) || echo Never mind.
 
 shared: buildinf.h lib subdirs
@@ -169,6 +173,7 @@ ex_data.o: ../include/openssl/opensslconf.h ../include/openssl/opensslv.h
 ex_data.o: ../include/openssl/ossl_typ.h ../include/openssl/safestack.h
 ex_data.o: ../include/openssl/stack.h ../include/openssl/symhacks.h cryptlib.h
 ex_data.o: ex_data.c
+fips_ers.o: ../include/openssl/opensslconf.h fips_ers.c
 mem.o: ../e_os.h ../include/openssl/bio.h ../include/openssl/buffer.h
 mem.o: ../include/openssl/crypto.h ../include/openssl/e_os2.h
 mem.o: ../include/openssl/err.h ../include/openssl/lhash.h
@@ -189,6 +194,19 @@ mem_dbg.o: ../include/openssl/stack.h ../include/openssl/symhacks.h cryptlib.h
 mem_dbg.o: mem_dbg.c
 o_dir.o: ../e_os.h ../include/openssl/e_os2.h ../include/openssl/opensslconf.h
 o_dir.o: LPdir_unix.c o_dir.c o_dir.h
+o_fips.o: ../e_os.h ../include/openssl/bio.h ../include/openssl/buffer.h
+o_fips.o: ../include/openssl/crypto.h ../include/openssl/e_os2.h
+o_fips.o: ../include/openssl/err.h ../include/openssl/lhash.h
+o_fips.o: ../include/openssl/opensslconf.h ../include/openssl/opensslv.h
+o_fips.o: ../include/openssl/ossl_typ.h ../include/openssl/safestack.h
+o_fips.o: ../include/openssl/stack.h ../include/openssl/symhacks.h cryptlib.h
+o_fips.o: o_fips.c
+o_init.o: ../e_os.h ../include/openssl/bio.h ../include/openssl/crypto.h
+o_init.o: ../include/openssl/e_os2.h ../include/openssl/err.h
+o_init.o: ../include/openssl/lhash.h ../include/openssl/opensslconf.h
+o_init.o: ../include/openssl/opensslv.h ../include/openssl/ossl_typ.h
+o_init.o: ../include/openssl/safestack.h ../include/openssl/stack.h
+o_init.o: ../include/openssl/symhacks.h o_init.c
 o_str.o: ../e_os.h ../include/openssl/e_os2.h ../include/openssl/opensslconf.h
 o_str.o: o_str.c o_str.h
 o_time.o: ../include/openssl/e_os2.h ../include/openssl/opensslconf.h o_time.c

crypto/aes/Makefile

@@ -50,9 +50,21 @@ aes-ia64.s: asm/aes-ia64.S
 
 aes-586.s:	asm/aes-586.pl ../perlasm/x86asm.pl
 	$(PERL) asm/aes-586.pl $(PERLASM_SCHEME) $(CFLAGS) $(PROCESSOR) > $@
+vpaes-x86.s:	asm/vpaes-x86.pl ../perlasm/x86asm.pl
+	$(PERL) asm/vpaes-x86.pl $(PERLASM_SCHEME) $(CFLAGS) $(PROCESSOR) > $@
+aesni-x86.s:	asm/aesni-x86.pl ../perlasm/x86asm.pl
+	$(PERL) asm/aesni-x86.pl $(PERLASM_SCHEME) $(CFLAGS) $(PROCESSOR) > $@
 
 aes-x86_64.s: asm/aes-x86_64.pl
 	$(PERL) asm/aes-x86_64.pl $(PERLASM_SCHEME) > $@
+vpaes-x86_64.s:	asm/vpaes-x86_64.pl
+	$(PERL) asm/vpaes-x86_64.pl $(PERLASM_SCHEME) > $@
+bsaes-x86_64.s:	asm/bsaes-x86_64.pl
+	$(PERL) asm/bsaes-x86_64.pl $(PERLASM_SCHEME) > $@
+aesni-x86_64.s: asm/aesni-x86_64.pl
+	$(PERL) asm/aesni-x86_64.pl $(PERLASM_SCHEME) > $@
+aesni-sha1-x86_64.s:	asm/aesni-sha1-x86_64.pl
+	$(PERL) asm/aesni-sha1-x86_64.pl $(PERLASM_SCHEME) > $@
 
 aes-sparcv9.s: asm/aes-sparcv9.pl
 	$(PERL) asm/aes-sparcv9.pl $(CFLAGS) > $@
@@ -60,8 +72,15 @@ aes-sparcv9.s: asm/aes-sparcv9.pl
 aes-ppc.s:	asm/aes-ppc.pl
 	$(PERL) asm/aes-ppc.pl $(PERLASM_SCHEME) $@
 
+aes-parisc.s:	asm/aes-parisc.pl
+	$(PERL) asm/aes-parisc.pl $(PERLASM_SCHEME) $@
+
+aes-mips.S:	asm/aes-mips.pl
+	$(PERL) asm/aes-mips.pl $(PERLASM_SCHEME) $@
+
 # GNU make "catch all"
-aes-%.s:	asm/aes-%.pl;	$(PERL) $< $(CFLAGS) > $@
+aes-%.S:	asm/aes-%.pl;	$(PERL) $< $(PERLASM_SCHEME) > $@
+aes-armv4.o:	aes-armv4.S
 
 files:
 	$(PERL) $(TOP)/util/files.pl Makefile >> $(TOP)/MINFO
@@ -117,9 +136,11 @@ aes_ige.o: ../../include/openssl/lhash.h ../../include/openssl/opensslconf.h
 aes_ige.o: ../../include/openssl/opensslv.h ../../include/openssl/ossl_typ.h
 aes_ige.o: ../../include/openssl/safestack.h ../../include/openssl/stack.h
 aes_ige.o: ../../include/openssl/symhacks.h ../cryptlib.h aes_ige.c aes_locl.h
-aes_misc.o: ../../include/openssl/aes.h ../../include/openssl/e_os2.h
-aes_misc.o: ../../include/openssl/opensslconf.h
-aes_misc.o: ../../include/openssl/opensslv.h aes_locl.h aes_misc.c
+aes_misc.o: ../../include/openssl/aes.h ../../include/openssl/crypto.h
+aes_misc.o: ../../include/openssl/e_os2.h ../../include/openssl/opensslconf.h
+aes_misc.o: ../../include/openssl/opensslv.h ../../include/openssl/ossl_typ.h
+aes_misc.o: ../../include/openssl/safestack.h ../../include/openssl/stack.h
+aes_misc.o: ../../include/openssl/symhacks.h aes_locl.h aes_misc.c
 aes_ofb.o: ../../include/openssl/aes.h ../../include/openssl/modes.h
 aes_ofb.o: ../../include/openssl/opensslconf.h aes_ofb.c
 aes_wrap.o: ../../e_os.h ../../include/openssl/aes.h

crypto/aes/aes.h

@@ -90,6 +90,11 @@ int AES_set_encrypt_key(const unsigned char *userKey, const int bits,
 int AES_set_decrypt_key(const unsigned char *userKey, const int bits,
 	AES_KEY *key);
 
+int private_AES_set_encrypt_key(const unsigned char *userKey, const int bits,
+	AES_KEY *key);
+int private_AES_set_decrypt_key(const unsigned char *userKey, const int bits,
+	AES_KEY *key);
+
 void AES_encrypt(const unsigned char *in, unsigned char *out,
 	const AES_KEY *key);
 void AES_decrypt(const unsigned char *in, unsigned char *out,

crypto/aes/aes_core.c

@@ -625,7 +625,7 @@ static const u32 rcon[] = {
 /**
  * Expand the cipher key into the encryption key schedule.
  */
-int AES_set_encrypt_key(const unsigned char *userKey, const int bits,
+int private_AES_set_encrypt_key(const unsigned char *userKey, const int bits,
 			AES_KEY *key) {
 
 	u32 *rk;
@@ -726,7 +726,7 @@ int AES_set_encrypt_key(const unsigned char *userKey, const int bits,
 /**
  * Expand the cipher key into the decryption key schedule.
  */
-int AES_set_decrypt_key(const unsigned char *userKey, const int bits,
+int private_AES_set_decrypt_key(const unsigned char *userKey, const int bits,
 			 AES_KEY *key) {
 
         u32 *rk;
@@ -734,7 +734,7 @@ int AES_set_decrypt_key(const unsigned char *userKey, const int bits,
 	u32 temp;
 
 	/* first, start with an encryption schedule */
-	status = AES_set_encrypt_key(userKey, bits, key);
+	status = private_AES_set_encrypt_key(userKey, bits, key);
 	if (status < 0)
 		return status;
 
@@ -1201,7 +1201,7 @@ static const u32 rcon[] = {
 /**
  * Expand the cipher key into the encryption key schedule.
  */
-int AES_set_encrypt_key(const unsigned char *userKey, const int bits,
+int private_AES_set_encrypt_key(const unsigned char *userKey, const int bits,
 			AES_KEY *key) {
 	u32 *rk;
    	int i = 0;
@@ -1301,7 +1301,7 @@ int AES_set_encrypt_key(const unsigned char *userKey, const int bits,
 /**
  * Expand the cipher key into the decryption key schedule.
  */
-int AES_set_decrypt_key(const unsigned char *userKey, const int bits,
+int private_AES_set_decrypt_key(const unsigned char *userKey, const int bits,
 			 AES_KEY *key) {
 
         u32 *rk;
@@ -1309,7 +1309,7 @@ int AES_set_decrypt_key(const unsigned char *userKey, const int bits,
 	u32 temp;
 
 	/* first, start with an encryption schedule */
-	status = AES_set_encrypt_key(userKey, bits, key);
+	status = private_AES_set_encrypt_key(userKey, bits, key);
 	if (status < 0)
 		return status;
 

crypto/aes/aes_misc.c

@@ -50,6 +50,7 @@
  */
 
 #include <openssl/opensslv.h>
+#include <openssl/crypto.h>
 #include <openssl/aes.h>
 #include "aes_locl.h"
 
@@ -62,3 +63,23 @@ const char *AES_options(void) {
         return "aes(partial)";
 #endif
 }
+
+/* FIPS wrapper functions to block low level AES calls in FIPS mode */
+
+int AES_set_encrypt_key(const unsigned char *userKey, const int bits,
+			AES_KEY *key)
+	{
+#ifdef OPENSSL_FIPS
+	fips_cipher_abort(AES);
+#endif
+	return private_AES_set_encrypt_key(userKey, bits, key);
+	}
+
+int AES_set_decrypt_key(const unsigned char *userKey, const int bits,
+			AES_KEY *key)
+	{
+#ifdef OPENSSL_FIPS
+	fips_cipher_abort(AES);
+#endif
+	return private_AES_set_decrypt_key(userKey, bits, key);
+	}

crypto/aes/aes_wrap.c

@@ -85,9 +85,9 @@ int AES_wrap_key(AES_KEY *key, const unsigned char *iv,
 			A[7] ^= (unsigned char)(t & 0xff);
 			if (t > 0xff)	
 				{
-				A[6] ^= (unsigned char)((t & 0xff) >> 8);
-				A[5] ^= (unsigned char)((t & 0xff) >> 16);
-				A[4] ^= (unsigned char)((t & 0xff) >> 24);
+				A[6] ^= (unsigned char)((t >> 8) & 0xff);
+				A[5] ^= (unsigned char)((t >> 16) & 0xff);
+				A[4] ^= (unsigned char)((t >> 24) & 0xff);
 				}
 			memcpy(R, B + 8, 8);
 			}
@@ -119,9 +119,9 @@ int AES_unwrap_key(AES_KEY *key, const unsigned char *iv,
 			A[7] ^= (unsigned char)(t & 0xff);
 			if (t > 0xff)	
 				{
-				A[6] ^= (unsigned char)((t & 0xff) >> 8);
-				A[5] ^= (unsigned char)((t & 0xff) >> 16);
-				A[4] ^= (unsigned char)((t & 0xff) >> 24);
+				A[6] ^= (unsigned char)((t >> 8) & 0xff);
+				A[5] ^= (unsigned char)((t >> 16) & 0xff);
+				A[4] ^= (unsigned char)((t >> 24) & 0xff);
 				}
 			memcpy(B + 8, R, 8);
 			AES_decrypt(B, B, key);

crypto/aes/asm/aes-586.pl

@@ -39,7 +39,7 @@
 # but exhibits up to 10% improvement on other cores.
 #
 # Second version is "monolithic" replacement for aes_core.c, which in
-# addition to AES_[de|en]crypt implements AES_set_[de|en]cryption_key.
+# addition to AES_[de|en]crypt implements private_AES_set_[de|en]cryption_key.
 # This made it possible to implement little-endian variant of the
 # algorithm without modifying the base C code. Motivating factor for
 # the undertaken effort was that it appeared that in tight IA-32
@@ -2854,12 +2854,12 @@ sub enckey()
     &set_label("exit");
 &function_end("_x86_AES_set_encrypt_key");
 
-# int AES_set_encrypt_key(const unsigned char *userKey, const int bits,
+# int private_AES_set_encrypt_key(const unsigned char *userKey, const int bits,
 #                        AES_KEY *key)
-&function_begin_B("AES_set_encrypt_key");
+&function_begin_B("private_AES_set_encrypt_key");
 	&call	("_x86_AES_set_encrypt_key");
 	&ret	();
-&function_end_B("AES_set_encrypt_key");
+&function_end_B("private_AES_set_encrypt_key");
 
 sub deckey()
 { my ($i,$key,$tp1,$tp2,$tp4,$tp8) = @_;
@@ -2916,9 +2916,9 @@ sub deckey()
 	&mov	(&DWP(4*$i,$key),$tp1);
 }
 
-# int AES_set_decrypt_key(const unsigned char *userKey, const int bits,
+# int private_AES_set_decrypt_key(const unsigned char *userKey, const int bits,
 #                        AES_KEY *key)
-&function_begin_B("AES_set_decrypt_key");
+&function_begin_B("private_AES_set_decrypt_key");
 	&call	("_x86_AES_set_encrypt_key");
 	&cmp	("eax",0);
 	&je	(&label("proceed"));
@@ -2974,7 +2974,7 @@ sub deckey()
 	&jb	(&label("permute"));
 
 	&xor	("eax","eax");			# return success
-&function_end("AES_set_decrypt_key");
+&function_end("private_AES_set_decrypt_key");
 &asciz("AES for x86, CRYPTOGAMS by <appro\@openssl.org>");
 
 &asm_finish();

crypto/aes/asm/aes-sparcv9.pl

@@ -1176,6 +1176,7 @@ ___
 # As UltraSPARC T1, a.k.a. Niagara, has shared FPU, FP nops can have
 # undesired effect, so just omit them and sacrifice some portion of
 # percent in performance...
-$code =~ s/fmovs.*$//gem;
+$code =~ s/fmovs.*$//gm;
 
 print $code;
+close STDOUT;	# ensure flush

crypto/aes/asm/aes-x86_64.pl

@@ -588,6 +588,9 @@ $code.=<<___;
 .globl	AES_encrypt
 .type	AES_encrypt,\@function,3
 .align	16
+.globl	asm_AES_encrypt
+.hidden	asm_AES_encrypt
+asm_AES_encrypt:
 AES_encrypt:
 	push	%rbx
 	push	%rbp
@@ -1184,6 +1187,9 @@ $code.=<<___;
 .globl	AES_decrypt
 .type	AES_decrypt,\@function,3
 .align	16
+.globl	asm_AES_decrypt
+.hidden	asm_AES_decrypt
+asm_AES_decrypt:
 AES_decrypt:
 	push	%rbx
 	push	%rbp
@@ -1277,13 +1283,13 @@ $code.=<<___;
 ___
 }
 
-# int AES_set_encrypt_key(const unsigned char *userKey, const int bits,
+# int private_AES_set_encrypt_key(const unsigned char *userKey, const int bits,
 #                        AES_KEY *key)
 $code.=<<___;
-.globl	AES_set_encrypt_key
-.type	AES_set_encrypt_key,\@function,3
+.globl	private_AES_set_encrypt_key
+.type	private_AES_set_encrypt_key,\@function,3
 .align	16
-AES_set_encrypt_key:
+private_AES_set_encrypt_key:
 	push	%rbx
 	push	%rbp
 	push	%r12			# redundant, but allows to share 
@@ -1304,7 +1310,7 @@ AES_set_encrypt_key:
 	add	\$56,%rsp
 .Lenc_key_epilogue:
 	ret
-.size	AES_set_encrypt_key,.-AES_set_encrypt_key
+.size	private_AES_set_encrypt_key,.-private_AES_set_encrypt_key
 
 .type	_x86_64_AES_set_encrypt_key,\@abi-omnipotent
 .align	16
@@ -1547,13 +1553,13 @@ $code.=<<___;
 ___
 }
 
-# int AES_set_decrypt_key(const unsigned char *userKey, const int bits,
+# int private_AES_set_decrypt_key(const unsigned char *userKey, const int bits,
 #                        AES_KEY *key)
 $code.=<<___;
-.globl	AES_set_decrypt_key
-.type	AES_set_decrypt_key,\@function,3
+.globl	private_AES_set_decrypt_key
+.type	private_AES_set_decrypt_key,\@function,3
 .align	16
-AES_set_decrypt_key:
+private_AES_set_decrypt_key:
 	push	%rbx
 	push	%rbp
 	push	%r12
@@ -1622,7 +1628,7 @@ $code.=<<___;
 	add	\$56,%rsp
 .Ldec_key_epilogue:
 	ret
-.size	AES_set_decrypt_key,.-AES_set_decrypt_key
+.size	private_AES_set_decrypt_key,.-private_AES_set_decrypt_key
 ___
 
 # void AES_cbc_encrypt (const void char *inp, unsigned char *out,
@@ -1648,6 +1654,9 @@ $code.=<<___;
 .type	AES_cbc_encrypt,\@function,6
 .align	16
 .extern	OPENSSL_ia32cap_P
+.globl	asm_AES_cbc_encrypt
+.hidden	asm_AES_cbc_encrypt
+asm_AES_cbc_encrypt:
 AES_cbc_encrypt:
 	cmp	\$0,%rdx	# check length
 	je	.Lcbc_epilogue
@@ -2766,13 +2775,13 @@ cbc_se_handler:
 	.rva	.LSEH_end_AES_decrypt
 	.rva	.LSEH_info_AES_decrypt
 
-	.rva	.LSEH_begin_AES_set_encrypt_key
-	.rva	.LSEH_end_AES_set_encrypt_key
-	.rva	.LSEH_info_AES_set_encrypt_key
+	.rva	.LSEH_begin_private_AES_set_encrypt_key
+	.rva	.LSEH_end_private_AES_set_encrypt_key
+	.rva	.LSEH_info_private_AES_set_encrypt_key
 
-	.rva	.LSEH_begin_AES_set_decrypt_key
-	.rva	.LSEH_end_AES_set_decrypt_key
-	.rva	.LSEH_info_AES_set_decrypt_key
+	.rva	.LSEH_begin_private_AES_set_decrypt_key
+	.rva	.LSEH_end_private_AES_set_decrypt_key
+	.rva	.LSEH_info_private_AES_set_decrypt_key
 
 	.rva	.LSEH_begin_AES_cbc_encrypt
 	.rva	.LSEH_end_AES_cbc_encrypt
@@ -2788,11 +2797,11 @@ cbc_se_handler:
 	.byte	9,0,0,0
 	.rva	block_se_handler
 	.rva	.Ldec_prologue,.Ldec_epilogue	# HandlerData[]
-.LSEH_info_AES_set_encrypt_key:
+.LSEH_info_private_AES_set_encrypt_key:
 	.byte	9,0,0,0
 	.rva	key_se_handler
 	.rva	.Lenc_key_prologue,.Lenc_key_epilogue	# HandlerData[]
-.LSEH_info_AES_set_decrypt_key:
+.LSEH_info_private_AES_set_decrypt_key:
 	.byte	9,0,0,0
 	.rva	key_se_handler
 	.rva	.Ldec_key_prologue,.Ldec_key_epilogue	# HandlerData[]