This decreases the MV related encoding table sizes
This should have little effect on real world video encoding performance
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
(cherry picked from commit d7c75a5db0)
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Functionality used before didn't widen the values from limited to
full range. Additionally, now the decoder uses BT.709 where it
should be used according to the video resolution.
Default for not yet set colorimetry is BT.709 due to most observed
HDMV content being HD.
BT.709 coefficients were gathered from the first two parts of BT.709
to BT.2020 conversion guide in ARIB STD-B62 (Pt. 1, Chapter 6.2.2).
They were additionally confirmed by manually calculating values.
Fixes#4637
(cherry picked from commit 9779b62624)
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Fixes out of array read
Fixes: mozilla bug 1266129
Found-by: Tyson Smith
Tested-by: Tyson Smith
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
(cherry picked from commit 9f36ea57ae)
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Sometimes video fails to decode if H.264 configuration changes mid stream.
The reason is that configuration parser assumes that nal_ref_idc is equal to 11b
while actually some codecs but 01b there. The H.264 spec is somewhat
vague about this but it looks like it allows any non-zero nal_ref_idc for sps/pps.
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
(cherry picked from commit 3a727606c4)
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Currently, if the movie source filter is used and a seek_point is
specified on a file that has a negative start time, ffmpeg will fail.
An easy way to reproduce this is as follows:
$ ffmpeg -vsync passthrough -filter_complex 'color=d=10,setpts=PTS-1/TB' test.mp4
$ ffmpeg -filter_complex 'movie=filename=test.mp4:seek_point=2' -f null -
The problem is caused by checking for int64_t overflow the wrong way.
In general, to check whether a + b overflows, it is not enough to do:
a > INT64_MAX - b
because b might be negative; the correct way is:
b > 0 && > a > INT64_MAX - b
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
(cherry picked from commit c1f9734f97)
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Original mail and my own followup on ffmpeg-user earlier today:
I have a device sending out a MJPEG/RTP stream on a low quality setting.
Decoding and displaying the video with libavformat results in a washed
out, low contrast, greyish image. Playing the same stream with VLC results
in proper color representation.
Screenshots for comparison:
http://zevv.nl/div/libav/shot-ffplay.jpghttp://zevv.nl/div/libav/shot-vlc.jpg
A pcap capture of a few seconds of video and SDP file for playing the
stream are available at
http://zevv.nl/div/libav/mjpeg.pcaphttp://zevv.nl/div/libav/mjpeg.sdp
I believe the problem might be in the calculation of the quantization
tables in the function create_default_qtables(), the attached patch
solves the issue for me.
The problem is that the argument 'q' is of the type uint8_t. According to the
JPEG standard, if 1 <= q <= 50, the scale factor 'S' should be 5000 / Q.
Because the create_default_qtables() reuses the variable 'q' to store the
result of this calculation, for small values of q < 19, q wil subsequently
overflow and give wrong results in the calculated quantization tables. The
patch below uses a new variable 'S' (same name as in RFC2435) with the proper
range to store the result of the division.
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
(cherry picked from commit e3e6a2cff4)
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
This should theoretically improve the randomness slightly
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
(cherry picked from commit 2540d884f3)
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Trying to make heads and tails out of DTS 6.1 I can across this typo.
I also noticed that this wiki page is incorrect or misleading, the
channel order for 6.1 given does not match the source code. At the
least it should be clarified that the layout given does not apply to
DTS. https://trac.ffmpeg.org/wiki/AudioChannelManipulation
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
(cherry picked from commit 73d1398f0c)
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
This is safer, as a selected demuxer could still mean that it was auto-detected
by a user application
Reviewed-previously-by: Nicolas George <george@nsup.org>
Reviewed-previously-by: Andreas Cadhalpun <andreas.cadhalpun@googlemail.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
(cherry picked from commit 689211d572)
Conflicts:
libavformat/concatdec.c
RTCP synchronization packet was broken since commit in ffmpeg version > 2.8.3
(commit: e04b039b15) Since this commit (2e814d0329)
"rtpenc: Simplify code by introducing a macro for rescaling NTP timestamps", NTP_TO_RTP_FORMAT
uses av_rescale_rnd() function to add the data to the packet.
This causes an overflow in the av_rescale_rnd() function and it will return INT64_MIN.
Causing the NTP stamp in the RTCP packet to have an invalid value.
Github: Closes#182
Reverting commit '2e814d0329aded98c811d0502839618f08642685' solves the problem.
(cherry picked from commit 1109ed7973)
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
This zeroes the WebPAnimEncoderOptions.verbose field, silencing library info messages
printed to stderr.
Reviewed-by: James Zern <jzern@google.com>
Signed-off-by: James Almer <jamrial@gmail.com>
(cherry picked from commit 626b6b769c)
Previously errors could result in random entries to be lost.
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
(cherry picked from commit f3ace85d88)
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Sample rate of 11025 takes 16 bits but previous code would pick only 8.
Fixes assertion failure.
Reviewed-by: Rostislav Pehlivanov <atomnuker@gmail.com>
Signed-off-by: Paul B Mahol <onemda@gmail.com>
(cherry picked from commit 3e7d684912)
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
This feature is not know much or used much AFAIK, and it might be helpfull in
exploits.
No specific case is known where it can be used in an exploit though
subsequent commits depend on this commit though
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
(cherry picked from commit 984d58a344)
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
With this, user applications which use custom IO and have set a IO context will not have
their already opened IO context ignored and glob/seq being interpreted
Comments and tests from maintainers of user apps are welcome!
Liked-by: wm4 <nfxjfg@googlemail.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
(cherry picked from commit 7ccedc1c78)
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
This feature is mostly only used by NLE software, and is
both of dubious value being enabled by default, and a
possible security risk.
Signed-off-by: Derek Buitenhuis <derek.buitenhuis@gmail.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
(cherry picked from commit 712d962a6a)
Conflicts:
libavformat/isom.h
libavformat/mov.c
libavformat/version.h
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Fixes out of array access
Fixes: aaa479088e6fb40b04837b3119f47b04/asan_heap-oob_e38c68_8576_9d653078b2470700e2834636f12ff557.tga
Found-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
(cherry picked from commit 03d83ba34b)
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Fixes out of array access
Fixes: 83aedfb29af669c4d6e10f1bfad974d2/asan_heap-oob_1ab42fe_4984_9f6ec14462f8d8a00ea24b320572a963.tif
Found-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
(cherry picked from commit 89f464e9c2)
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Fixes: 372d2df1f04b49e25f109f07f90b1505/asan_heap-oob_2835d2e_8501_99e0114d7ba3a6db885d0b4684d200c1.cine
Fixes out of array read
Found-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
(cherry picked from commit 757248ea3c)
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Fixes: 372d2df1f04b49e25f109f07f90b1505/asan_heap-oob_2835d2e_8501_99e0114d7ba3a6db885d0b4684d200c1.cine
Fixes out of array read
Found-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
(cherry picked from commit ad3b6fa7d8)
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
* commit '8375dc1dd101d51baa430f34c0bcadfa37873896':
asfdec: handle the case when the stream index has an invalid value better
Merged-by: Hendrik Leppkes <h.leppkes@gmail.com>
(cherry picked from commit bf67ae3cfa)
Signed-off-by: Andreas Cadhalpun <Andreas.Cadhalpun@googlemail.com>
src and dst are only 8-bit-aligned, so accessing them as uint16_t causes
SIGBUS crashes on architectures like sparc.
This fixes ubsan runtime error: load of misaligned address for type
'const uint16_t', which requires 2 byte alignment
Reviewed-by: Michael Niedermayer <michael@niedermayer.cc>
Signed-off-by: Andreas Cadhalpun <Andreas.Cadhalpun@googlemail.com>
(cherry picked from commit 44ac13eed4)
Signed-off-by: Andreas Cadhalpun <Andreas.Cadhalpun@googlemail.com>
The size of decoding map can differ from one calculated
internally, producing artifacts while decoding video.
Signed-off-by: Paul B Mahol <onemda@gmail.com>
(cherry picked from commit c293ef258c)
Signed-off-by: Andreas Cadhalpun <Andreas.Cadhalpun@googlemail.com>
Fixes out of array accesses
Fixes: 0cf176e6d3ab9fe924f39738e513f547/asan_generic_4a54aa_3431_aaa28be1cb32e307a9890cad06f84fba.avi
Found-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
(cherry picked from commit 8f4c3e4b92)
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Fixes out of array access
Fixes: 0cf176e6d3ab9fe924f39738e513f547/asan_generic_4a54aa_3431_aaa28be1cb32e307a9890cad06f84fba.avi
Found-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
(cherry picked from commit 7ec9c5ce8a)
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Fixes: out of array reads
Fixes: 07e8b9c5d348ccdf7add0f37de20cf6c/asan_heap-oob_27e8df7_6849_e56653f768070ec8cb52f587048444c2.mov
Found-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
(cherry picked from commit eb7802afef)
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
This makes SWS more robust
Fixes: 07650a772d98aa63b0fed6370dc89037/asan_heap-oob_27ddeaf_2657_2c81ff264dee5d9712cb3251fb9c3bbb.264
Fixes: out of array read
Found-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
(cherry picked from commit 8f3a9a8c27)
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Fixes out of array read
Fixes: 03c406ec9530e594a074ce2979f8a1f0/asan_heap-oob_7dec26_4664_37c52495b2870a2eaac65f53958e76c1.flac
Found-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
(cherry picked from commit 115fb6d03e)
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
They are stored in a byte, thus more than 255 is not possible
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
(cherry picked from commit 59c915a403)
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Prevents that following scalers in the filter chain will do unintentional color range conversions.
Fixes Ticket #5096
Signed-off-by: Thomas Mundt <loudmax@yahoo.de>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
(cherry picked from commit 73ce8162f3)
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
This causes a overall slowdown of 0.1 % (tested with mpeg4 single thread encoding of matrixbench at QP=3)
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
(cherry picked from commit cccb0ffccc)
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
This can happen if s->ls changes from 0 to 1, but picture allocation is
skipped due to s->interlaced.
In that case ff_jpegls_decode_picture could be called even though the
s->picture_ptr frame has the wrong pixel format and thus a wrong
linesize, which results in a too small zero buffer being allocated.
This fixes an out-of-bounds read in ls_decode_line.
Reviewed-by: Michael Niedermayer <michael@niedermayer.cc>
Signed-off-by: Andreas Cadhalpun <Andreas.Cadhalpun@googlemail.com>
(cherry picked from commit 7ea2db6eaf)
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
If it is negative, it can cause the byte position to move backwards in
avio_skip, which in turn makes sm_size negative and thus size larger
than the size of the packet buffer, causing invalid writes in avio_read.
Also fix potential overflow of avio_tell(bc) + value_len.
Reviewed-by: Michael Niedermayer <michael@niedermayer.cc>
Signed-off-by: Andreas Cadhalpun <Andreas.Cadhalpun@googlemail.com>
(cherry picked from commit ce10f572c1)
Signed-off-by: Andreas Cadhalpun <Andreas.Cadhalpun@googlemail.com>
This is used to check if the input buffer is large enough, so if this
overflows it can cause a false negative leading to a segmentation fault
in bytestream2_get_bufferu.
Reviewed-by: Michael Niedermayer <michael@niedermayer.cc>
Signed-off-by: Andreas Cadhalpun <Andreas.Cadhalpun@googlemail.com>
(cherry picked from commit 9d38f06d05)
Signed-off-by: Andreas Cadhalpun <Andreas.Cadhalpun@googlemail.com>
More don't fit into the integer output.
Also use get_bits_long, since get_bits only supports reading up to 25
bits, while get_bits_long supports the full integer range.
Reviewed-by: Michael Niedermayer <michael@niedermayer.cc>
Signed-off-by: Andreas Cadhalpun <Andreas.Cadhalpun@googlemail.com>
(cherry picked from commit 4d5c3b02e9)
Signed-off-by: Andreas Cadhalpun <Andreas.Cadhalpun@googlemail.com>
Otherwise the too samll buffer is directly used in the frame, causing
segmentation faults, when trying to use the frame.
Signed-off-by: Andreas Cadhalpun <Andreas.Cadhalpun@googlemail.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Fixes out of array read
Fixes mozilla bug 1233606
Found-by: Tyson Smith
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
(cherry picked from commit b92b4775a0)
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
This also suppresses a ubsan warning
Fixes Mozilla bug 1230247
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
(cherry picked from commit ef8f6464a5)
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
The change was not correct and broke H264
This reverts commit cd83f899c9.
(cherry picked from commit 95b59bfb9d)
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
If that is the case, the loop setting predictor_state in
sonic_decode_frame causes out of bounds reads of int_samples, which has
only frame_size number of elements.
Reviewed-by: Michael Niedermayer <michael@niedermayer.cc>
Signed-off-by: Andreas Cadhalpun <Andreas.Cadhalpun@googlemail.com>
(cherry picked from commit 9637c2531f)
Signed-off-by: Andreas Cadhalpun <Andreas.Cadhalpun@googlemail.com>
Due to this typo max_center can be too large, causing nlsf to be set to
too large values, which in turn can cause nlsf[i - 1] + min_delta[i] to
overflow to a negative value, which is not allowed for nlsf and can
cause an out of bounds read in silk_lsf2lpc.
Reviewed-by: Michael Niedermayer <michael@niedermayer.cc>
Signed-off-by: Andreas Cadhalpun <Andreas.Cadhalpun@googlemail.com>
(cherry picked from commit f61d44b74a)
Signed-off-by: Andreas Cadhalpun <Andreas.Cadhalpun@googlemail.com>
A negative codec_id cannot be handled by the found_decoder API of
AVStream->info: if the codec_id is not recognized, found_decoder is set
to -codec_id, which has to be '<0' according to the API documentation.
This can cause NULL pointer dereferencing in try_decode_frame.
Also make sure the codec_type matches the expected one for codec_id.
Reviewed-by: Michael Niedermayer <michael@niedermayer.cc>
Signed-off-by: Andreas Cadhalpun <Andreas.Cadhalpun@googlemail.com>
(cherry picked from commit ecf63b7cc2)
Signed-off-by: Andreas Cadhalpun <Andreas.Cadhalpun@googlemail.com>
Also correct the check to reject log < 7, because UPDATE_CACHE only
guarantees 25 meaningful bits.
This fixes undefined behavior:
runtime error: shift exponent is negative
Testing with START/STOP timers in get_ue_golomb, one for the first
branch (A) and one for the second (B), shows that there is practically no
slowdown, e.g. for the cavs decoder:
With the check in the B branch:
629 decicycles in get_ue_golomb B, 4194260 runs, 44 skips
433 decicycles in get_ue_golomb A,268434102 runs, 1354 skips
Without the check:
624 decicycles in get_ue_golomb B, 4194273 runs, 31 skips
433 decicycles in get_ue_golomb A,268434203 runs, 1253 skips
Since the B branch is executed far less often than the A branch, this
change is negligible, even more so for the h264 decoder, where the ratio
B/A is a lot smaller.
Fixes: mozilla bug 1230239
Fixes: fbeb8b2c7c996e9b91c6b1af319d7ebc/asan_heap-oob_195450f_2743_e8856ece4579ea486670be2b236099a0.bit
Found-by: Tyson Smith
Found-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
Reviewed-by: Michael Niedermayer <michael@niedermayer.cc>
Signed-off-by: Andreas Cadhalpun <Andreas.Cadhalpun@googlemail.com>
(cherry picked from commit 22e960ad47)
Signed-off-by: Andreas Cadhalpun <Andreas.Cadhalpun@googlemail.com>
If the input contains too many too large values, the imdct can overflow.
Even if it didn't, the output would be larger than the valid range of 29
bits.
Note that this is a very delicate limit: Allowing values up to 1<<25
does not prevent input larger than 1<<29 from arriving at
sbr_sum_square, while limiting values to 1<<23 breaks the
fate-aac-fixed-al_sbr_hq_cm_48_5.1 test.
Signed-off-by: Andreas Cadhalpun <Andreas.Cadhalpun@googlemail.com>
(cherry picked from commit fdc94db37e)
Signed-off-by: Andreas Cadhalpun <Andreas.Cadhalpun@googlemail.com>
This also as a sideeffect fixes the non aligned case
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
(cherry picked from commit a066ff89bc)
The transpose_4x4H is wrong which cost me much time to find this bug. The orders of r2 and r3 are wrong,
this bug waste me much time while I make aarch64 arm instruction which used the function.
(cherry picked from commit c18176bd55)
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Fixes a mpegts file with hevc that fails estimating duration. Increasing number of
retries fixes the issue.
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
(cherry picked from commit 2d8c2f1a28)
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
If the chroma components are subsampled, smaller buffers are allocated
for them. In that case the maximal block_offset for the chroma
components is not as large as for the luma component.
This fixes out of bounds writes causing segmentation faults or memory
corruption.
Reviewed-by: Michael Niedermayer <michael@niedermayer.cc>
Signed-off-by: Andreas Cadhalpun <Andreas.Cadhalpun@googlemail.com>
(cherry picked from commit 5adb5d9d89)
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
VP8E_UPD_ENTROPY, VP8E_UPD_REFERENCE, VP8E_USE_REFERENCE were removed
from libvpx and the remaining values were never used here
Reviewed-by: Michael Niedermayer <michael@niedermayer.cc>
Signed-off-by: James Zern <jzern@google.com>
(cherry picked from commit 6540fe04a3)
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Fixes out of array read
Fixes: d41d8cd98f00b204e9800998ecf8427e/signal_sigsegv_321165b_7641_077dfcd8cbc80b1c0b470c8554cd6ffb.bit
Found-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
(cherry picked from commit 2140858524)
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Fixes out of array read
Fixes: 99d142c47e6ba3510a74b872a1a2ae72/asan_heap-oob_11b36f4_3811_0f5c69e7609a88a580135678de1df844.dxa
Found-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
(cherry picked from commit a08681f1e6)
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
ts->mux_rate is int (signed 32-bit) type. The period calculations
will start to overflow when mux_rate > 5mbps. This fixes overflows
by converting first to 64-bit type.
Fixes#5044.
Signed-off-by: Timo Teräs <timo.teras@iki.fi>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
(cherry picked from commit 64f7db554e)
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
The fps variable is explicitly set to -1 in case of some errors, the check must
thus be signed or the code setting it needs to use 0 as error code
the type of the field could be changed as well but its in an installed header
Fixes: integer overflow
Fixes: 9982cc157b1ea90429435640a989122f/asan_generic_3ad004a_3799_22cf198d9cd09928e2d9ad250474fa58.mov
Found-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
(cherry picked from commit b46dcd5209)
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Fixes integer overflow
Fixes: mozilla bug 1229167
Found-by: Tyson Smith
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
(cherry picked from commit f03c2ceec1)
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Fixes out of array read
Fixes: 0a7ff0c1d93da9cef28a315ec91b692a/asan_heap-oob_4a52e5_3604_9c56dbb20e308f4faeef7b35f688521a.ape
Found-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
(cherry picked from commit cd7524fdd1)
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Fixes: out of array read
Fixes: 76c515fc3779d1b838667c61ea13ce92/asan_heap-oob_1fc0d07_8913_794a4629a264ebdb25b58d3a94ed1785.bit
Found-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
(cherry picked from commit 891dc8f875)
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
The code expects actual positive numbers and gives completely wrong
results if INT64_MIN is treated as positive
Instead clip it into the valid range that is add 1 and treat it as
negative
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
(cherry picked from commit 25e37f5ea9)
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Fixes out of array read
Fixes: 59bb925e90201fa0f87f0a31945d43b5/asan_heap-oob_4a52e5_3388_66027f11e3d072f1e02401ecc6193361.jvt
Found-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
(cherry picked from commit aa427537b5)
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Fixes out of array access
Fixes: 482d8f2fd17c9f532b586458a33f267c/asan_heap-oob_4a52b6_7417_1d08d477736d66cdadd833d146bb8bae.mov
Found-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
(cherry picked from commit abee0a1c60)
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Fixes out of array read
Fixes: 2f95ddd996db8a6281d2e18c184595a7/asan_heap-oob_192fe91_3330_58e4441181e30a66c19f743dcb392347.bit
Found-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
(cherry picked from commit dad354f38d)
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Fixes out of array access
Fixes: 08664a2a7921ef48172f26495c7455be/asan_heap-oob_23036c6_3301_523388ef84285a0270caf67a43247b59.bit
Found-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
(cherry picked from commit d85aa76115)
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Fixes out of array access
Fixes: 01859c9a9ac6cd60a008274123275574/asan_heap-oob_1dff571_8250_50d3d1611e294c3519fd1fa82198b69b.avi
Found-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
(cherry picked from commit 75422280fb)
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Fixes out of array read
Fixes: 007c4a36608ebdf27ee260ad60a81184/asan_heap-oob_32076b4_2243_116b1cb29d91cc4974d6680e3d10bd91.bit
Found-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
(cherry picked from commit ef9f7bbfa4)
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Fixes out of array access
Fixes: 1430e9c43fae47a24c179c7c54f94918/signal_sigsegv_421427_2049_f2192b6829ab6e0eefcb035329c03c60.264
Found-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
(cherry picked from commit 4ea4d2f438)
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
The XTEA algorithm operates on 32 bit numbers, not on byte sequences.
The XTEA implementation in libavutil is written assuming big endian
numbers, while the rtmpe signature encryption assumes little endian.
This fixes rtmpe communication with rtmpe servers that use signature
type 8 (XTEA), e.g. crunchyroll.
CC: libav-stable@libav.org
Signed-off-by: Martin Storsjö <martin@martin.st>
(cherry picked from commit e7728319b92dbb4fb949155e33de7ff5358ddff3)
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Fixes out of array access
Fixes: ce19e41f0ef1e52a23edc488faecdb58/asan_heap-oob_2504e97_4202_ffa0df1baed14022b9bfd4f8ac23d0cb.smk
Found-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
(cherry picked from commit 4a9af07a49)
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Fixes out of array read
Fixes: cb3f38b08b4541523974667c7d1eee9e/asan_heap-oob_2659e18_9838_021fd5cd635bf76cede6398cd9ecbcdd.tak
Found-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
(cherry picked from commit 08b520636e)
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Fixes out of array read
Fixes: c50c4aa6cefda71b19a31ea12302980c/asan_heap-oob_12be5fd_7011_33ebd015a74976215934add72b9c8352.avi
Found-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
(cherry picked from commit 9caa9414cc)
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
The height of tables can be rounded up for MBAFF but this does not imply that is also true
for the previous frames
Fixes out of array reads
Fixes: c106b36fa36db8ff8f3ed0c82be7bea2/asan_heap-oob_32699f0_6321_467b9a1d7e03d7cfd310b7e65dc53bcc.mov
Found-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
(cherry picked from commit a105f52855)
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Fixes out of array read
Fixes: 61cf123c081ee2bb774d307c75bdb99e/asan_heap-oob_1224f76_5546_bee833ffae73f752b489b9eeaac52db7.dpx
Found-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
(cherry picked from commit c8aaae8e0f)
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Fixes out of array read
Fixes: 3c857d4d90365731524716e6d051e43a/signal_sigsegv_7f4f59bcc29e_1386_20abd2c8e655cb9c75b24368e65fe3b1.flv
Found-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
(cherry picked from commit 17705f5d4f)
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
It is used as size argument of ff_canopus_parse_info_tag, which uses it
as size argument to bytestream2_init, which only supports sizes up to
INT_MAX.
Changing it's type to unsigned simplifies the check.
Reviewed-by: Vittorio Giovara <vittorio.giovara@gmail.com>
Signed-off-by: Andreas Cadhalpun <Andreas.Cadhalpun@googlemail.com>
(cherry picked from commit 1ed7fcd42a)
Signed-off-by: Andreas Cadhalpun <Andreas.Cadhalpun@googlemail.com>
Fixes potential integer overflows
Fixes: 03e0abe721b1174856d41a1eb5d6a896/signal_sigabrt_7ffff6ae7cc9_3813_e71bf3541abed3ccba031cd5ba0269a4.avi
This fix is choosen to be simple to backport, better solution
for master is planed
Found-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
(cherry picked from commit 6ef819c40b)
Signed-off-by: Andreas Cadhalpun <Andreas.Cadhalpun@googlemail.com>
Fixes assertion failure
Fixes: 03e0abe721b1174856d41a1eb5d6a896/signal_sigabrt_7ffff6ae7cc9_3813_e71bf3541abed3ccba031cd5ba0269a4.avi
This fix is choosen to be simple to backport, better solution
for master is planed
Found-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
(cherry picked from commit a1a8cbcb35)
Signed-off-by: Andreas Cadhalpun <Andreas.Cadhalpun@googlemail.com>
Fixes out of array read
Fixes: 20dd01398dee0f6d83d7e5410a2ae8eb/signal_sigsegv_39eeb1f_4001_62efbdf1c60748dabf1ec310b59525fd.mov
Found-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
(cherry picked from commit ccba8aaff2)
Signed-off-by: Andreas Cadhalpun <Andreas.Cadhalpun@googlemail.com>
This prevents various values from getting an insanely huge exponent.
If someone knows a cleaner solution, thats welcome!
This is similar to commit 8978c74 for aacsbr.
Reviewed-by: Michael Niedermayer <michael@niedermayer.cc>
Signed-off-by: Andreas Cadhalpun <Andreas.Cadhalpun@googlemail.com>
(cherry picked from commit 0e36a14a42)
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
This is of use for defining comparator callbacks. Common approaches like
return x-y are not safe due to the risks of overflow.
Furthermore, the (x > y) - (x < y) trick is optimized to branchless
code.
This also documents this macro accordingly.
Reviewed-by: Michael Niedermayer <michael@niedermayer.cc>
Signed-off-by: Ganesh Ajjanagadde <gajjanagadde@gmail.com>
(cherry picked from commit 265f83fd35)
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Also support disabling them as they seem to cause problems to some
Users. They are also not allowed in IRT D-10 thus the default for
mxf_d10 is not to write them
This also decreases the filesize when no user comment are stored
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
(cherry picked from commit d9726893f3)
Conflicts:
libavformat/mxfenc.c
The CMP variable seems to have been inherited from fate-api-seek which set it to null
the mxf reference needed a change due to c7e14a279f
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
(cherry picked from commit b83c849e87)
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
The return type of strlen is size_t, i.e. unsigned, so if pd->buf_size
is 3, the right side overflows leading to a wrong result of the
comparison and subsequently a heap buffer overflow.
Reviewed-by: Paul B Mahol <onemda@gmail.com>
Signed-off-by: Andreas Cadhalpun <Andreas.Cadhalpun@googlemail.com>
(cherry picked from commit db374790c7)
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Fixes out of array access
Fixes: b877a6b788a25c70e8b1d014f8628549/asan_heap-oob_1da2c3f_2324_5a1b329b0b3c4bb6b1d775660ac56717.r3d
Found-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
(cherry picked from commit 43492ff3ab)
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Fixes out of array read
Fixes: a9502b60f4cecc19475382aee255f73c/asan_heap-oob_1e87fba_2548_a8ad47f6dde36644fe9cdc444d4632d0.sub
Found-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
(cherry picked from commit c719cd6cf7)
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Fixes out of array access
Fixes: 54e488b9da4abbceaf405d6492515697/asan_heap-oob_32769b0_160_a8755eb08ee8f9579348501945a33955.TIF
Found-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
(cherry picked from commit d4a731b84a)
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Fixes out of array access
Fixes: 24d05e8b84676799c735c9e27d97895e/asan_heap-oob_1b70f6a_2955_7c3652a7f370f9f3ef40642bc2c99bb2.bit
Found-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
(cherry picked from commit 93f30f825c)
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Fixes: 04715144ba237443010554be0d05343f/asan_heap-oob_1eafc76_1737_c685b48041a563461839e4e7ab97abb8.jpg
Fixes out of array access
Found-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
(cherry picked from commit d24888ef19)
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Avoids inheritance of file handles on Windows systems similar to the
O_CLOEXEC/FD_CLOEXEC flag on Linux.
Fixes file lock issues in Windows applications when a child process
is started with handle inheritance enabled (standard input/output
redirection) while a FFmpeg transcoding is running in the parent
process.
Links relevant to the subject:
https://msdn.microsoft.com/en-us/library/w7sa2b22.aspx
Describes the _wsopen() function and the O_NOINHERIT flag. File handles
opened by _wsopen() are inheritable by default.
https://msdn.microsoft.com/en-us/library/windows/desktop/ms682425%28v=vs.85%29.aspx
Describes handle inheritance when creating new processes. Handle
inheritance must be enabled (bInheritHandles = TRUE) e.g. when you want
to pass handles for stdin/stdout via lpStartupInfo.
Signed-off-by: Tobias Rapp <t.rapp@noa-audio.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
(cherry picked from commit 4746653466)
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Fixes null pointer dereference
Fixes part of Ticket4977
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
(cherry picked from commit 9368d2da3d33cac845f2fdf663df500b53625c5e)
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Context cookies must be updated when a playlist response return Setcookie header.
See: 770dd10504
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
This ensures that they are always set to valid values
Fixes Ticket4939
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
(cherry picked from commit a878dfa4f5)
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Some RTSP servers ("HiIpcam/V100R003 VodServer/1.0.0") respond to
our keepalive GET_PARAMETER request by a truncated RTSP header
(lacking the final empty line to indicate a complete response
header). Prior to 764ec70149, this worked just fine since we
reacted to the $ as interleaved packet indicator anywhere.
Since $ is a valid character within the response header lines,
764ec70149 changed it to be ignored there. But to keep
compatibility with such broken servers, we need to at least
allow reacting to it at the start of lines.
Fixes ticket #4952.
Signed-off-by: Martin Storsjö <martin@martin.st>
(cherry picked from commit e02dcdf6bb)
Commit 2b3e9bbfb5 caused problems for a
certain API user:
https://code.google.com/p/chromium/issues/detail?id=537725https://code.google.com/p/chromium/issues/detail?id=542032
The problem seems rather arbitrary, because if there's junk, anything
can happen. In this case, the imperfect junk skipping just caused it to
read different junk, from what I can see.
We can improve the accuracy of junk detection by a lot by checking if 2
consecutive frames use the same configuration. While in theory it might
be completely fine for the 1st frame to have a different format than the
2nd frame, it's exceedingly unlikely, and I can't think of a legitimate
use-case.
This is approximately the same mpg123 does for junk skipping. The
set of compared header bits is the same as the libavcodec mp3 parser
uses for similar purposes.
(cherry picked from commit de1b1a7da9)
Without EXT-X-MAP support we miss the first bytes of some streams.
These streams worked by luck before byte-ranged segment support was added in
da7759b357
Fixes ticket #4797.
(cherry picked from commit 9099079488)
Conflicts:
libavformat/hls.c
Commit ad701326b4 ("avformat/hls: open playlists immediately when
AVDISCARD_ALL is dropped") inadvertently caused first_packet to never be
cleared, causing select_cur_seq_no() to not use the specific code for
live streams.
In practice this means that when the user selects a different audio
track during live stream (i.e. non-VOD) playback, there may be some
additional delay as the code might select an incorrect segment at first,
and we have to wait for video to catch audio (if too late segment was
selected) or to download more following audio segments (if too early
segment was selected).
Fix that by restoring the zeroing of first_packet.
(cherry picked from commit fd74d45d51)
The variable is not a constant and can lead to race conditions
Fixes: repro.webm (not reproducable with FFmpeg alone)
Found-by: Dale Curtis <dalecurtis@google.com>
Tested-by: Dale Curtis <dalecurtis@google.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
(cherry picked from commit dabea74d0e)
When scaling only a slice of a frame the output was written always
in the first lines leaving the rest of the frame black.
(cherry picked from commit 5bd62a1b3c)
If there is no #EXT-X-BYTERANGE specified, there is no need to seek.
Seeking fails anyway for rtmp, because this protocol does not support
url_seek.
This fixes CNN.m3u from trac ticket 4797 (i.e. Debian bug #798189).
Reviewed-by: wm4 <nfxjfg@googlemail.com>
Signed-off-by: Andreas Cadhalpun <Andreas.Cadhalpun@googlemail.com>
(cherry picked from commit f9f0b4c08e)
Signed-off-by: Andreas Cadhalpun <Andreas.Cadhalpun@googlemail.com>
the pps offset is used to locate pps in the spspps_buf; however, the
current calc method is wrong because it is the offset of the original
avctx->extradata;
when there is only one sps in the avcc; the value is correct by
coincidence, however, it will
fail in avcc with multi sps
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
(cherry picked from commit 6b32d0d86b6bec2b5cb565d6ab4556f8cd66214a)
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Broken by commit ba12ba859a. This only
happens with HLS streams which use encryption and require preserving
cookies sent by the server.
Fixes trac issue #4846.
(cherry picked from commit 26eb294007)
Commits 43bc5cf9 and c5371f77 add code for skipping initial zeros in mp3
packets. This code forgot to report to the user that data was skipped at
all.
Since audio codecs allow partial packet decoding, the user application
has to rely on the return value. It will remove the data reported as
consumed by the decoder, and feed it to the decoder again. This resulted
in the mp3 frame after the zero region to be decoded over and over
again, until the zero region was finally skipped by the application.
Fix this by including the amount of skipped bytes to the number of
consumed bytes returned by the decode call.
Fixes trac ticket #4890.
(cherry picked from commit cb1da9fb8d)
Should fix compilation with mingw-w64 trunk, where ID3D11VideoDecoder is available
but ID3D11VideoContext still isn't.
Signed-off-by: James Almer <jamrial@gmail.com>
(cherry picked from commit b8e4df46ab)
The stream ID is essentially an arbitrary number defined by the .idx
file headers. They have to match the IDs in the .sub stream. The vobsub
demuxer assumed the IDs would just start from 0, increassing by 1 for
each stream. This is not correct. In the sample I had, the IDs were
starting from 1, leading to no subtitles being displayed at all.
Fix this by using the correct stream ID.
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
(cherry picked from commit a47ad06baf)
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Modified sps and pps access from old HEVCContext(s) structure to newly introduced HEVCParamSets(ps).
Signed-off-by: Shivraj Patil <shivraj.patil@imgtec.com>
Commit in master: b0732b0214
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
This fixes access to Grandstream cameras, which return 401 to ffmpeg
otherwise.
VLC sends Authorization: header with spaces between parameters, and it
is known to work with Grandstream devices and broad range of other HTTP
and RTSP servers, so author considers switching to such behaviour safe.
Just for record - RFC 2617 (HTTP Auth) does not specify the need in
spaces, so this is not a bug of FFmpeg.
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
(cherry picked from commit fdb3283872)
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
CID 1260 (as evidenced by incorrect decoding of a sample from ticket
4876) seems to use incorrect weight tables. It appears those tables
were not zigzag-scanned.
Apply zigzag on weight tables for new CIDs 1258, 1259, and 1260, and
fix an incorrect chroma table for CID 1256.
Fixes last issue from ticket #4876.
Found-by: Christophe Gisquet <christophe.gisquet@gmail.com>
Signed-off-by: Christophe Gisquet <christophe.gisquet@gmail.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
(cherry picked from commit 428424fe75)
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
This bit is 1 in some samples, and seems to coincide with interlaced
mbs and CID1260. 2008 specs do not know about it, and maintain qscale
is 11 bits. This looks oversized, but may help larger bitdepths.
Currently, it leads to an obviously incorrect qscale value, meaning
its syntax is shifted by 1. However, reading 11 bits also leads to
obviously incorrect decoding: qscale seems to be 10 bits.
However, as most profiles still have 11bits qscale, the feature is
restricted to the CID1260 profile.
The encoder writes 12 bits of syntax, last and first bits always 0,
which is now somewhat inconsistent with the decoder, but ends up with
the same effect (progressive + reserved bit).
Partially fixes ticket #4876.
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
(cherry picked from commit 2801a1352d)
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Dimensions / pixel formats for scaling must be set through the -s / pix_fmt options
or the scale / format filters. Otherwise there are mismatches between whet is
in/output to the scaler and for what the scaler is configured
Fixes Ticket4856
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
(cherry picked from commit a0af9fd954)
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Not requiring this can end up producing hilariously broken files
together with -c:s copy (e.g. a webvtt file containing binary subtitle data).
Signed-off-by: Simon Thelen <ffmpeg-dev@c-14.de>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
(cherry picked from commit b84232694e)
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Fixes linking in FFMS and f265 at least, when ffmpeg is compiled with
libsoxr.
Signed-off-by: Ricardo Constantino <wiiaboo@gmail.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
(cherry picked from commit 2641eeeefe)
Signed-off-by: Timothy Gu <timothygu99@gmail.com>
There's no consensus yet if this deprecation is desired, so it's removed
from this release for the time being
Signed-off-by: James Almer <jamrial@gmail.com>
This commit improves the TNS implementation to the point where it's
actually usable and very rarely results in nastyness (in all bitrates
except extremely low bitrates it's increasing the quality and prevents
some distortions from the coder being audiable).
Also adds a double filter support which is only used if the energy
difference between the top and bottom of the SFBs is above the
thresholds defined in the header file. Looking at the bitstream
that fdk_aac generates it sometimes used a double filter despite
the specs stating that a single filter should be enough for almost
all cases and purposes.
Unlike FAAC or fdk_aac we sometimes use a reverse filter in case
the energy difference isn't enought to use a double filter. This
actually works better.
Signed-off-by: Rostislav Pehlivanov <atomnuker@gmail.com>
This commit adds a flag to use the pure coefficients instead
of the processed ones (sce->coeffs). This is needed because
IS will apply the changes to the coefficients immediately
before the adjust_common_prediction function and it doesn't
make sense to measure stereo channel coefficient difference
when one of the channels coefficients are all zero.
Therefore add a flag to use pure coefficients in that case.
TNS is the only thing touching the coefficients before IS
so common window prediction will not take that into account
but the effect of the TNS filter per coefficient can be small
(a few percent) so to some approximation it's fine to just
ignore that.
Also fixed a small error which doesn't alter the results
that much. pow(sqrt(number), 3.0/4.0) == pow(number, 3.0/8.0) !=
pow(number, 3.0/4.0).
Signed-off-by: Rostislav Pehlivanov <atomnuker@gmail.com>
stream copy always has a input stream, it cannot use complex video/audio filters with unambigous input
Fixes CID1322348
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Fixes potential division by zero
Fixes: CID1292295
Reviewed-by: Ganesh Ajjanagadde <gajjanag@mit.edu>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
The assignment had incorrectly placed parentheses which resulted in ret
always being > 0.
Reviewed-by: wm4 <nfxjfg@googlemail.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
This macro avoids the undefined corner case with the *_MIN values
Previous version Reviewed-by: Ganesh Ajjanagadde <gajjanag@mit.edu>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
32bit is not sufficient for all cases
Fixes: signal_sigabrt_7ffff6ac8cc9_686_cov_1897408623_microsoft_new_way_to_shove_mpeg2_in_asf.dvr_ms
Found-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Matches what av_get_colorspace_name() and av_color_space_name() report.
Signed-off-by: Vittorio Giovara <vittorio.giovara@gmail.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
TNS had both IS and PNS switched on when it makes more sense
to have them both off.
Prediction had a redundant argument.
Signed-off-by: Rostislav Pehlivanov <atomnuker@gmail.com>
This commit reorders the coding tools such that they're doing what
the decoder does in reverse order. The very first thing the decoder
does is to decode M/S stereo if that's signalled, then prediction,
IS, and finally TNS and PNS in another function.
adjust_frame_information()'s application of IS and M/S was taken
out into two separate functions since prediction doesn't expect
to get the raw coefficients but rathe the coefficients at that
part of the encoding process.
The results show a much better PSNR when any combination of
Intensity Stereo, Mid/Side stereo and Prediction is used, which
is a sign of an increased encoder efficiency as well as the fact
that the decoder gets what it expects.
Otherwise, with only IS, PNS or prediction there are neither
regressions nor improvements except in the case of IS, which
now by itself (or with PNS) is less prone to artifacts. Enabling
M/S (using stereo_mode) as well will also reduce stereo artifacts
induced by IS, so in the very near future M/S may be enabled
by default.
Signed-off-by: Rostislav Pehlivanov <atomnuker@gmail.com>
This is mostly useful if libass was compiled with a font provider
other than fontconfig, but is still useful in that case.
Signed-off-by: Ricardo Constantino <wiiaboo@gmail.com>
PES header size is 6 bytes (00 00 01 bf XX XX), not 0.
BluRay text subtitles use private stream 2.
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Instead of returning EINVAL, which can cause a stream to fail to load, this
allows the tag to be passed through to the flv demuxer, where it's summarily
ignored.
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
If the selected coder isn't twoloop, this commit temporarily
disables IS and PNS.
The problem is in the encode_window_bands_info() being confused
and setting invalid band_types for non-marked (normal) bands.
Signed-off-by: Rostislav Pehlivanov <atomnuker@gmail.com>
IS and PNS increase quality a ton so as a result the PSNR changed.
Disable the extensions and keep the tests separate such that there
will be no red herrings if one test fails.
Signed-off-by: Rostislav Pehlivanov <atomnuker@gmail.com>
Since the changes made a few week ago (which were done more than a
month ago) the quality and stability of intensity stereo has been
notably good. There were some requests and wishes to have in on by
default and therefore it has been enabled. Should any regressions
arise changes will be made to preferably keep it operating rather
than just disabling it by default again.
Signed-off-by: Rostislav Pehlivanov <atomnuker@gmail.com>
It has been in the current encoder in its current implementation
for quite some time now, so enable it by default. Will increase
quality at all bitrates, especially at low ones.
Signed-off-by: Rostislav Pehlivanov <atomnuker@gmail.com>
Purely a cosmetic change, most of the zeroing of encoder resources
should happen at the top of the main loop.
Signed-off-by: Rostislav Pehlivanov <atomnuker@gmail.com>
This commit reworks the TNS implementation to a hybrid between what
the specifications say, what the decoder does and what's the best
thing to do.
The filter application function was copied from the decoder and
modified such that it applies the inverse AR filter to the
coefficients. The LPC coefficients themselves are fed into the
same quantization expression that the specifications say should
be used however further processing is not done, instead they're
converted to the form that the decoder expects them to be in
and are sent off to the compute_lpc_coeffs function exactly the
way the decoder does. This function does all conversions and will
return the exact coefficients that the decoder will generate, which
are then applied to the coefficients.
Having the exact same coefficients on both the encoder and decoder
is a must since otherwise the entire sfb's over which the filter
is applied will be attenuated.
Despite this major rework, TNS might not work fine on some audio
types at very low bitrates (e.g. sub 90kbps) as it can attenuate
some coefficients too much. Users are advised to experiment with
TNS at higher bitrates if they wish to use this tool or simply
wait for the implementation to be improved.
Signed-off-by: Rostislav Pehlivanov <atomnuker@gmail.com>
Turns out autocorrelating more than 750 coefficients at once
will cause a segfault, despite there being enough space to
hold an entire frame of samples into the buffer.
Signed-off-by: Rostislav Pehlivanov <atomnuker@gmail.com>
This commit adds a function to get the reflection coefficients on
floating point samples. It's functionally identical to
ff_lpc_calc_ref_coefs() except it works on float samples and will
return the global prediction gain. The Welch window implementation
which is more optimized works only on int32_t samples so a slower
generic expression was used.
Signed-off-by: Rostislav Pehlivanov <atomnuker@gmail.com>
Not needed anymore, it was only used by the AAC TNS
encoder and was replaced with a more suitable function
in the following commit.
Signed-off-by: Rostislav Pehlivanov <atomnuker@gmail.com>
Needed for following commits. Contains the starting sfb for
every samplerate and window type.
Signed-off-by: Rostislav Pehlivanov <atomnuker@gmail.com>
Fixes out of array access
Fixes: 87196d8bbc633629fc9dd851fce73e70/asan_heap-oob_26f6853_862_cov_585961513_sonic3dblast_intro-partial.avi
Found-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Without this fate-filter-join failes with
FF_API_GET_CHANNEL_LAYOUT_COMPAT disabled.
Reviewed-by: Ronald S. Bultje <rsbultje@gmail.com>
Signed-off-by: Andreas Cadhalpun <Andreas.Cadhalpun@googlemail.com>
* commit 'c457bdebe7af643b380aa0f6add3cb4335d218dc':
checkasm: Fix floating point arguments on 64-bit Windows
Merged-by: Hendrik Leppkes <h.leppkes@gmail.com>
* commit 'b1abd2aaf91be249f24cb74db9c205d9e4ca9da6':
vf_scale: Add an option to pass the scaler params
Merged-by: Hendrik Leppkes <h.leppkes@gmail.com>
* commit 'c23999be134bde0a0554261a9043be7dbc01de0c':
avconv_opt: Add an option that lists all supported hwaccels
Merged-by: Hendrik Leppkes <h.leppkes@gmail.com>
This uses a RGB intermediate, a more optimal solution would be to perform the rematrixing
directly in subsampled YUV, this is quite a bit more complicated though
Fixes Ticket4805
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
This was copied from the decoder, but is unneeded for the encoder.
tns_max_bands is unused and set to zero which zeroed out start, end
and size and thus no filter was actually applied.
Signed-off-by: Rostislav Pehlivanov <atomnuker@gmail.com>
Since the coefficients are stepped up to order + 1 it was possible
that it went over TNS_MAX_ORDER. Also just return in case the only
coefficient is less than the threshold.
Signed-off-by: Rostislav Pehlivanov <atomnuker@gmail.com>
The encoder-side filter isn't that important. The PSNR
shouldn't change so the FATE test should still be fine.
Signed-off-by: Rostislav Pehlivanov <atomnuker@gmail.com>
The order should never go above TNS_MAX_ORDER (and thus cause
the context to be reinitialized) but this is just in case.
Also fix a comparison, since the coefficients are zero-indexed.
Signed-off-by: Rostislav Pehlivanov <atomnuker@gmail.com>
It also made no sense to actually make the filter span the entire
window including the first band of the next window.
Signed-off-by: Rostislav Pehlivanov <atomnuker@gmail.com>
Tests fails on some ARM builds but it's close enough so it's okay.
NEON, half-precision floats, rounding errors, who knows.
Signed-off-by: Rostislav Pehlivanov <atomnuker@gmail.com>
This commit introduces a test for AAC-Main prediction
which was just reworked in this series of commits.
Signed-off-by: Rostislav Pehlivanov <atomnuker@gmail.com>
Pulses are already on the way so expect to see the list
gone in the close future.
TNS is already of sufficiently high quality to be enabled
by default (but isn't yet, so you too can help by testing!).
Signed-off-by: Rostislav Pehlivanov <atomnuker@gmail.com>
This commit abandons the way the specifications state to
quantize the coefficients, makes use of the new LPC float
functions and is much better.
The original way of converting non-normalized float samples
to int32_t which out LPC system expects was wrong and it was
wrong to assume the coefficients that are generated are also
valid. It was essentially a full garbage-in, garbage-out
system and it definitely shows when looking at spectrals
and listening. The high frequencies were very overattenuated.
The new LPC function performs the analysis directly.
The specifications state to quantize the coefficients into
four bit index values using an asin() function which of course
had to have ugly ternary operators because the function turns
negative if the coefficients are negative which when encoding
causes invalid bitstream to get generated.
This deviates from this by using the direct TNS tables, which
are fairly small since you only have 4 bits at most for index
values. The LPC values are directly quantized against the tables
and are then used to perform filtering after the requantization,
which simply fetches the array values.
The end result is that TNS works much better now and doesn't
attenuate anything but the actual signal, e.g. TNS removes
quantization errors and does it's job correctly now.
It might be enabled by default soon since it doesn't hurt and
helps reduce nastyness at low bitrates.
Signed-off-by: Rostislav Pehlivanov <atomnuker@gmail.com>
This commit removes the array which was made redundant with
the last commit. The current prediction system gets the
quantization error directly (and without the single-frame delay)
in the search_for_pred function.
Signed-off-by: Rostislav Pehlivanov <atomnuker@gmail.com>
This commit completely alters the algorithm of prediction.
The original commit which introduced prediction was completely
incorrect to even remotely care about what the actual coefficients
contain or whether any options were enabled. Not my actual fault.
This commit treats prediction the way the decoder does and expects
to do: like lossy encryption. Everything related to prediction now
happens at the very end but just before quantization and encoding
of coefficients. On the decoder side, prediction happens before
anything has had a chance to even access the coefficients.
Also the original implementation had problems because it actually
touched the band_type of special bands which already had their
scalefactor indices marked and it's a wonder the asserion wasn't
triggered when transmitting those.
Overall, this now drastically increases audio quality and you should
think about enabling it if you don't plan on playing anything encoded
on really old low power ultra-embedded devices since they might not
support decoding of prediction or AAC-Main. Though the specifications
were written ages ago and as times change so do the FLOPS.
Signed-off-by: Rostislav Pehlivanov <atomnuker@gmail.com>
This was missed when the original commits were done. FF_PROFILE_UNKNOWN
is what's in avctx->profile when no audio profile is specified.
Signed-off-by: Rostislav Pehlivanov <atomnuker@gmail.com>
This commit simply duplicates the functionality of ff_lpc_calc_coefs()
for the case of a Levinson-Durbin LPC with the only difference being
that floating point samples are accepted and the resulting coefficients
are raw and unquantized.
The motivation behind doing this is the fact that the AAC encoder
requires LPC in TNS and LTP and converting non-normalized floating
point coefficients to int32_t using SWR and again back for the LPC
coefficients was very impractical.
The current LPC interfaces were designed for int32_t in mind possibly
because FLAC and ALAC use this type for most internal operations.
The mathematics in case of floats remains of course identical.
Signed-off-by: Rostislav Pehlivanov <atomnuker@gmail.com>
This commit simply moves the TNS tables to a more appropriate
aactab.h since then they can be accessed by both the decoder
and encoder.
The encoder _shouldn't_ normally need the tables since the
specs describe a specific quantization process, but the exact
reason for this can be seen in the TNS commit following.
Signed-off-by: Rostislav Pehlivanov <atomnuker@gmail.com>
At least for vdpau, the hwaccel init code tries to check the video
profile and ensure that there is a matching vdpau profile available.
If it can't find a match, it will fail to initialise.
In the case of wmv3/vc1, I observed initialisation to fail all the
time. It turns out that this is due to the hwaccel being initialised
very early in the codec init, before the profile has been extracted
and set.
Conceptually, it's a simple fix to reorder the init code, but it gets
messy really fast because ff_get_format(), which is what implicitly
trigger hwaccel init, is called multiple times through various shared
init calls from h263, etc. It's incredibly hard to prove to my own
satisfaction that it's safe to move the vc1 specific init code
ahead of this generic code, but all the vc1 fate tests pass, and I've
visually inspected a couple of samples and things seem correct.
Signed-off-by: Philip Langdale <philipl@overt.org>
This prevents breaking existing command lines in case the "ab" default is removed from libavcodec
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
The amv one probably looks suspicious, but since it's an intra-only
codec, I couldn't possibly imagine what it would use the edge for,
and the vsynth fate result doesn't change, so it's probably OK.
The current algorithm is just "try all the combinations, and pick the best".
It's not very fast either, probably due to a lot of copying, but will do for
an initial implementation.
Signed-off-by: Donny Yang <work@kota.moe>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Better message that ffplay is not going to be built by printing out what
will be built.
Based on a patch by Moritz Barsnick.
Signed-off-by: rogerdpack <rogerpack2005@gmail.com>
Reviewed-by: Ganesh Ajjanagadde <gajjanag@mit.edu>
Signed-off-by: Timothy Gu <timothygu99@gmail.com>
Assert on `avctx->codec->encode2` to avoid a SEGFAULT on the subsequent
function call.
avcodec_encode_video2() uses a similar assertion.
Calling the wrong function on a stream is a serious inconsistency
which could at other places be potentially dangerous and exploitable,
it is thus safer to stop execution and not continue with such
inconsistency after returning an error.
Commit-message-extended-by commiter
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
The wiki, Ticket1464, and Ticket3970 warn about the usage of GCC 4.2.
This fixes Ticket3970.
Signed-off-by: Ganesh Ajjanagadde <gajjanagadde@gmail.com>
* commit '413d4e54a9bffe2d0afdc6d8a80f516e5df6a421':
nvenc: Properly free the fifos
Not merged, ffmpeg's nvenc doesn't use these fifos.
Merged-by: Hendrik Leppkes <h.leppkes@gmail.com>
* commit '2157df425bd909854fd4afcec4aa3311d8a3b31b':
hlsenc: Support outputting specific versions
Not merged, the version is auto-selected in ffmpeg based on enabled features.
Merged-by: Hendrik Leppkes <h.leppkes@gmail.com>
grep is not necessary for the functionality.
This avoids an unnecessary fork.
Signed-off-by: Ganesh Ajjanagadde <gajjanagadde@gmail.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
And update the preference for the newer codecs now that the libraries
seem stable and widespread enough.
Bug-Id: 695
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
This demuxer was broken on a large number of platforms due to usage of wrong
format specifier in sscanf. This patch fixes the problem, and also adds some
debug logging to reduce future debugging pain.
grep is not required for the functionality in this instance.
This avoids an unnecessary fork, and also avoids a duplicated dumpversion call.
Furthermore, it also corrects behavior when no minor version number is present, see e.g
https://github.com/joyent/node/pull/25671.
Signed-off-by: Ganesh Ajjanagadde <gajjanagadde@gmail.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Use a comment to list the reused tables, since it's more flexible than a
table name to keep information like this. The list will expand in later
commits.
* commit '167ea1fbf15ecefa30729f9b8d091ed431bf43bd':
xavs: Do not try to set the bitrate tolerance without a bitrate
Merged-by: Hendrik Leppkes <h.leppkes@gmail.com>
* commit 'f9ab4fe1f7c1e9d410ca5ee2c9ff8d2892aad068':
h264: Discard currently unsupported registered sei
Merged-by: Hendrik Leppkes <h.leppkes@gmail.com>
* commit '47b447aaff1bc30ba986ca757346a2c5c95b786a':
imgutils: Fix a typo in avcodec_get_pix_fmt_loss
Not merged, this code was refactored and moved to avutil.
Merged-by: Hendrik Leppkes <h.leppkes@gmail.com>
* commit 'd8ebb6157d12183ed3fc987cd2ba18b404758828':
hevcdsp: fix a function name
Not merged, ffmpeg has no function of this name anymore.
Merged-by: Hendrik Leppkes <h.leppkes@gmail.com>
* commit 'e13da244f41610ee073b2f72bcf62b60fa402bb5':
checkasm: x86: properly save rdx/edx in checked_call()
Merged-by: Hendrik Leppkes <h.leppkes@gmail.com>
Works only for flv, h263 and huffyuv decoders.
Makes only one pass through the file (this should be changed to two passes)
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Otherwise it is impossible to make '-movflags +rtphint' bitexact after
FF_API_LAVF_BITEXACT has been disabled.
Reviewed-by: Ronald S. Bultje <rsbultje@gmail.com>
Signed-off-by: Andreas Cadhalpun <Andreas.Cadhalpun@googlemail.com>
Including libavutil/internal.h breaks compilation of doc/print_options.c
with MSVC due to linking avpriv_strtod/avpriv_snprintf.
This reverts part of commit 095347f.
Reviewed-by: Michael Niedermayer <michael@niedermayer.cc>
Signed-off-by: Andreas Cadhalpun <Andreas.Cadhalpun@googlemail.com>
This fixes a -Wabsolute-value reported by clang 3.5+ complaining about misuse of fabs() for integer absolute value.
An additional benefit is the removal of floating point calculations.
Signed-off-by: Ganesh Ajjanagadde <gajjanagadde@gmail.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
FAIL(ret) expands to statements including a silly ret=ret.
This triggers a -Wself-assign on confirmed clang 3.6, and so we fix it.
Signed-off-by: Ganesh Ajjanagadde <gajjanagadde@gmail.com>
Reviewed-by: Nicolas George <george@nsup.org>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Fixes -Wunused-function warnings when compiling with --disable-yasm on x86.
Signed-off-by: Ganesh Ajjanagadde <gajjanagadde@gmail.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
This commit removes the last thing a Windows environment can
complain about the AAC encoder code. Leftover from an old revision.
Signed-off-by: Rostislav Pehlivanov <atomnuker@gmail.com>
Thanks to @nevcairiel for pointing this one out.
Another thing which stopped msvc from compiling.
Signed-off-by: Rostislav Pehlivanov <atomnuker@gmail.com>
When the encoder is ran without specifying -profile:a
the default avctx->profile value is -99 (FF_PROFILE_UKNOWN),
which used to be treated as AAC-LC.
Signed-off-by: Rostislav Pehlivanov <atomnuker@gmail.com>
Hotfix to deal with msvc. Sane compilers lack POSIX ffs().
It only saves a single bit or so and isn't worth it that much.
Signed-off-by: Rostislav Pehlivanov <atomnuker@gmail.com>
This commit finalizes AAC-Main profile encoding support
by implementing all mandatory and optional tools available
in the specifications and current decoders.
The AAC-Main profile reqires that prediction support be
present (although decoders don't require it to be enabled)
for an encoder to be deemed capable of AAC-Main encoding,
as well as TNS, PNS and IS, all of which were implemented
with previous commits or earlier of this year.
Users are encouraged to test the new functionality using either
-profile:a aac_main or -aac_pred 1, the former of which will enable
the prediction option by default and the latter will change the
profile to AAC-Main. No other options shall be changed by enabling
either, it's currently up to the users to decide what's best.
The current implementation works best using M/S and/or IS,
so users are also welcome to enable both options and any
other options (TNS, PNS) for maximum quality.
Signed-off-by: Rostislav Pehlivanov <atomnuker@gmail.com>
This commit implements temporal noise shaping support in the
encoder, along with an -aac_tns option to toggle it on or off
(off by default for now). TNS will increase audio quality
and reduce quantization noise by applying a multitap FIR filter
across allowed coefficients and transmit side information to the
decoder so it could create an inverse filter.
Users are encouraged to test the new functionality by enabling
-aac_tns 1 during encoding.
No major bugs are observable at this time so after a while if no
new problems appear and if the current implementation is deemed
of high enough quality and stability it will be enabled by default,
possibly at the same time the encoder has its experimental flag
removed and becomes the standard aac encoder in ffmpeg.
Signed-off-by: Rostislav Pehlivanov <atomnuker@gmail.com>
This commit permits for the use of the Main profile
in encoding. The functionality of that profile will
be added in the commits following. By itself, this
commit does not alter anything.
Signed-off-by: Rostislav Pehlivanov <atomnuker@gmail.com>
This commit moves the intensity stereo implementation
out from aaccoder and into a separate file. This was
possible using the previous commits.
This commit also drastically improves the IS implementation
by making it phase invariant e.g. it will always choose the
best possible phase regardless of whether M/S coding is on
or most of the coefficients have identical phases.
This also increases the quality and reduces any distortions
introduced by enablind intensity stereo.
Users are encouraged to test it out using the -aac_is 1
parameter as it has always been.
Signed-off-by: Rostislav Pehlivanov <atomnuker@gmail.com>
This commit updates the function definitions in the aaccoder_mips.c
file. This was broken around a month or so ago with the addition
of the rounding argument.
The previous commit in this series also introduced a separate array
to put the quantization error in, this also needed to be updated,
albeit non-functional, in the MIPS optimized aaccoder file.
Credits for the rounding goes to Claudio Freire.
Signed-off-by: Rostislav Pehlivanov <atomnuker@gmail.com>
This commit moves the quantizer to a separate header file.
This allows the quantizer to be used from a separate files outside
of aaccoder without having to put another function pointer and will
result in a slight speedup as the compiler can do more optimizations.
This is required for commits following.
Signed-off-by: Rostislav Pehlivanov <atomnuker@gmail.com>
This commit only creates and initializes an LTP
context which is needed for upcoming commits (TNS).
Signed-off-by: Rostislav Pehlivanov <atomnuker@gmail.com>
This commit simply populates the table pointer which is needed
for upcoming commits (TNS, prediction, etc.). Copied from
the decoder.
Signed-off-by: Rostislav Pehlivanov <atomnuker@gmail.com>
This commit moves the resetting of special bands (above RESERVED_BT)
to the main frame encoding function rather than the way it was done
previously in their corresponding search_for_... functions.
The reason why special bands need to be reset is that while normal
bands get chosen for every frame by the coder (twoloop by default)
the coders do not touch any special sfbs and will therefore
make them persist throughout the file.
If we zero them out any bands left unmarked will be chosen by
the second part of the coder (the trellis function in aaccoder.c).
Signed-off-by: Rostislav Pehlivanov <atomnuker@gmail.com>
This commit only changes the coding style to a saner way
of accessing coefficients (makes more sense to get the
memory address of a coefficients and start from there
rather than adding arbitrary numbers to offset a pointer).
Some compilers might detect an out of bounds access easier.
Also the way M/S and IS coefficients are calculated has been
changed, but should still have the same result (with the exception
that IS now applies from the normal coefficients rather than the
pristine ones, this is needed for upcoming commits).
Signed-off-by: Rostislav Pehlivanov <atomnuker@gmail.com>
Fixes a -Wunused-variable while compiling with --disable-yasm on x86
Signed-off-by: Ganesh Ajjanagadde <gajjanagadde@gmail.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Comment was previously slightly incorrect.
Also, it was placed in the wrong location.
Signed-off-by: Ganesh Ajjanagadde <gajjanagadde@gmail.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
The null muxer has AVFMT_RAWPICTURE set but can be fed with non-raw material
related to Ticket4778
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Works only with video stream.
First pass without seeking -- counts crcs of a frames and store it in an array.
After that it seeks a lot in different places and checks if crcs of these frames and crcs of frames in array are the same.
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Now we no longer have to rely on function pointers intentionally
declared without specified argument types.
This makes it easier to support functions with floating point parameters
or return values as well as functions returning 64-bit values on 32-bit
architectures. It also avoids having to explicitly cast strides to
ptrdiff_t for example.
Signed-off-by: Anton Khirnov <anton@khirnov.net>
If the return value doesn't fit in a single register rdx/edx can in some
cases be used in addition to rax/eax.
Doesn't affect any of the existing checkasm tests but might be useful later.
Also comment the relevant code a bit better.
Signed-off-by: Anton Khirnov <anton@khirnov.net>
If the return value doesn't fit in a single register rdx/edx can in some
cases be used in addition to rax/eax.
Doesn't affect any of the existing checkasm tests but might be useful later.
Also comment the relevant code a bit better.
Now we no longer have to rely on function pointers intentionally
declared without specified argument types.
This makes it easier to support functions with floating point parameters
or return values as well as functions returning 64-bit values on 32-bit
architectures. It also avoids having to explicitly cast strides to
ptrdiff_t for example.
Invalid buffer ids are defined by VA_INVALID_ID. Use that through out
vaapi_*.c support files now that we have private data initialized and
managed by libavcodec. Previously, the only requirement for the public
vaapi_context struct was to be zero-initialized.
This fixes support for 3rdparty VA drivers that strictly conform to
the API whereby an invalid buffer id is VA_INVALID_ID and the first
valid buffer id can actually be zero.
Signed-off-by: Gwenole Beauchesne <gwenole.beauchesne@intel.com>
Move libavcodec managed objects from the public struct vaapi_context
to a new privately owned FFVAContext. This is done so that to clean up
and streamline the public structure, but also to prepare for new codec
support, thus requiring new internal data to be added in there.
The AVCodecContext.hwaccel_context, that holds the public vaapi_context,
shall no longer be accessed from within vaapi_*.c codec support files.
Signed-off-by: Gwenole Beauchesne <gwenole.beauchesne@intel.com>
Deprecate older VA pixel formats (MOCO, IDCT) as it is now very unlikely
to ever be useful in the future. Only keep plain AV_PIX_FMT_VAAPI format
that is aliased to the older VLD variant.
This is an API change.
Signed-off-by: Gwenole Beauchesne <gwenole.beauchesne@intel.com>
Fixing small leaks that can occur when mkv_write_tracks fails in mkv_write_header
(e.g., if video track has unknown codec). Also changing mkv_write_seekhead to take
the MatroskaMuxContext to avoid having dangling pointers.
Signed-off-by: Neil Birkbeck <neil.birkbeck@gmail.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Currently, when forcing an I frame, via API, or via the ffmpeg cli,
using -force_key_frames, we still let x264 decide what sort of
keyframe to user. In some cases, it is useful to be able to force
an IDR frame, e.g. for cutting streams.
Signed-off-by: Derek Buitenhuis <derek.buitenhuis@gmail.com>
When building SDL with MinGW, it sets -mwindows with the
assumption that the application is a GUI application. If this
is linked without passing -mconsole to configure via
--extra-ldflags, stdout will be silenced from cmd.exe while
running FFmpeg.
The -mwindows flag that causes this behavior is included in the
sdl_libs variable, so append -mconsole there rather than create
an sdl_ldflags case just to insert it (especially if -mconsole
must come *after* -mwindows in order to be effective).
Reviewed-by: Timothy Gu <timothygu99@gmail.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
* commit '317cfaa5e09755ed0b34af512ec687963a67bdbf':
asfdec: prevent the memory leak in the asf_read_metada_obj
Merged-by: Hendrik Leppkes <h.leppkes@gmail.com>
* commit '58c3720a3cc71142b5d48d8ccdc9213f9a66cd33':
fate: Make sure a corner-case for ASF is covered
Adjusted fate ref to match the different timebase of the ffasf demuxer
Merged-by: Hendrik Leppkes <h.leppkes@gmail.com>
* commit '72839fce6457fdb5d51b4a5381ac52914ee66389':
hlsenc: Use AV_TIME_BASE units for all the computations
Not merged, duration/time computation is handled quite differently in ffmpeg's hlsenc
Merged-by: Hendrik Leppkes <h.leppkes@gmail.com>
* commit '7bf9647264308d2df74b2b50669f2d02a7ecc90b':
vp7: bound checking in vp7_decode_frame_header
Only partially merged, see 46f72ea507
Merged-by: Hendrik Leppkes <h.leppkes@gmail.com>
* commit 'f34b152eb7b7e8d2aee57c710a072cf74173fbe1':
libfdk-aacdec: Clean up properly if the init fails
Merged-by: Hendrik Leppkes <h.leppkes@gmail.com>
* commit '87de6ddb7b7674e329d5c96677bd8685bc7f7855':
libfdk-aacdec: Bump the max number of channels to 8
Merged-by: Hendrik Leppkes <h.leppkes@gmail.com>
* commit '26ac22e5e7394346e9d59f800e7d4e91f4518d33':
movenc: Add a new flag for writing global sidx indexes for dash
Conflicts:
libavformat/movenc.c
libavformat/movenc.h
Merged-by: Hendrik Leppkes <h.leppkes@gmail.com>
+ split color conversion from scaling
- disabled gamma correction, until it's refactored too
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
This filter can be used to scale one stream to match another or based on
another, useful to scale subtitles or other things to be overlayed
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
The h264 decoder reports 4.1 as its maximum level, but it will decode
5.1 4K video just fine. In practice, the published level limits in
vdpau do not communicate anything that's actually useful.
also do not return the error code but just break reading
metadata object in the case of the aspect ratio reading failure
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
Previously most of the error paths leaked.
Also add FF_CODEC_CAP_INIT_THREADSAFE while adding caps_internal;
this decoder wrapper doesn't have any static data that is initialized.
Signed-off-by: Martin Storsjö <martin@martin.st>
For ADTS streams, the output format (number of channels, frame size)
can change at any point (with the latest version of fdk-aac, the decoder
seems to change format after a handful of frames, not outputting the
right format immediately, for cases that worked fine with the earlier
version of the lib).
Previously, the decoder decoded straight into the output frame once the
number of channels and frame size was known. This obviously does not
work if the number of channels or frame size changes.
The alternative would be to allocate the AVFrame with the maximum number
of channels and frame size, and change them afterward decoding into it,
but that may cause confusion to users e.g. of the get_buffer callback.
This solution should be more robust.
CC: libav-stable@libav.org
Signed-off-by: Martin Storsjö <martin@martin.st>
In the latest version of fdk-aac, the decoder can output up to 8
channels; take this into account when preallocating buffers that
need to fit the output from any packet.
CC: libav-stable@libav.org
Signed-off-by: Martin Storsjö <martin@martin.st>
Don't try to detect the float ABI by checking at the toolchain
name or by trying to assemble and link files with eabi_attributes.
This fixes the float ABI detection when building using clang
with -fembed-bitcode, where the current eabi_attributes check
accidentally passes.
This issue was pointed out by James Howe <james.howe@hp.com>.
CC: libav-stable@libav.org
Signed-off-by: Martin Storsjö <martin@martin.st>
The value of wrap_flag in the Text Wrap Box specifies if the text is to
be wrapped or not. Uses 'end of line wrap' amongst the wrap styles
supported by ASS if the text is to be wrapped, i.e; fill as much text
in a line as possible, then break to next line.
The 3GPP spec has no provision for smart wrapping.
Signed-off-by: Niklesh <niklesh.lalwani@iitb.ac.in>
The description is yet crappy, it merely copies the description of the
added and undocumented options and their value range. More descriptive
documentation is welcome.
Stream timebase should be set using avpriv_set_pts_info, otherwise
avctx->pkt_timebase is not correct.
This should fix ticket #4766.
Patch is only compile tested.
Signed-off-by: Marton Balint <cus@passwd.hu>
Reviewed-by: Stephen Hutchinson <qyot27@gmail.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
As suggested, posting the combined patch with the fate changes.
The patch sets the default style in ASS from the default style
information present in the movtext header.
Signed-off-by: Niklesh <niklesh.lalwani@iitb.ac.in>
The double meaning of the faststart flag (moving a moov atom
to the start of files, making them streamable, for non-fragmented
files, vs inserting a global sidx index at the start of files
for fragmented files) is confusing - see 40ed1cbf1 for
explanation of its origins.
Since the second meaning of the flag hasn't been part of any
libav release yet, just rename it to get rid of the confusion
without any extra deprecation (which wouldn't get rid of the
potential confusion, of users adding -movflags faststart
even for fragmented files, where it isn't needed for making
them "streamable").
This gets back the old behaviour, where -movflags faststart
doesn't have any effect for fragmented files.
Signed-off-by: Martin Storsjö <martin@martin.st>
* commit 'f5e486f6f8c242bb2be01ad3ae952b5733ba1113':
x86inc: Fix instantiation of YMM registers
See e93d3a22cb
Merged-by: Hendrik Leppkes <h.leppkes@gmail.com>
* commit 'b114d28a18050b5ebd22fc067332e5487243889c':
x86inc: warn when instructions incompatible with current cpuflags are used
See a1684311b3
Merged-by: Hendrik Leppkes <h.leppkes@gmail.com>
* commit '9f1245eb9620a70feaa00ba745c6c7a56a839556':
x86inc: Support arbitrary stack alignments
See 826790f596
Merged-by: Hendrik Leppkes <h.leppkes@gmail.com>
* commit '8c75ba55a4367c854b577c849ea2195bd78c4c81':
x86inc: warn if XOP integer FMA instruction emulation is impossible
See 8db0f71b49
Merged-by: Hendrik Leppkes <h.leppkes@gmail.com>
* commit '8f4a06faf45c1cbcabec610f4b47824171379934':
checkasm: Remove unnecessary include
See 5e8e121fcc
Merged-by: Hendrik Leppkes <h.leppkes@gmail.com>
A parser should never be called with a mismatching codec
Found-by: Ganesh Ajjanagadde <gajjanag@mit.edu>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
FATE is non-interactive; it should not listen to user commands
Signed-off-by: Ganesh Ajjanagadde <gajjanagadde@gmail.com>
This should fix leaving the terminal in a messed up state with
zsh in case of crashes during fate
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Don't try to do a blocking wait for MMAL output if we haven't even sent
a single real packet, but only flush packets. Obviously we can't expect
to get anything back.
Additionally, don't send a flush packet to MMAL in the same case. It
appears the MMAL decoder will sometimes hang in mmal_vc_port_disable()
(called from ffmmal_close_decoder()), waiting for a reply from the GPU
which never arrives. Either MMAL disallows sending flush packets without
preceding real data, or it's a MMAL bug.
I can't come up with a nice way to handle this. It's hard to keep the
lock-stepped input/output in this case. You can't predict whether the
MMAL decoder will output a picture (because it's asynchronous), so
you have to assume in general that any packet could produce 0 or 1
frames. You can't continue to write input packets to the decoder,
because then you might get too many output frames, which you can't
get rid of because the lavc decoding API does not allow the decoder
to return an output frame without consuming an input frame (except
when flushing).
The ideal fix is a M:N decoding API (preferably asynchronous), which
would make this code potentially much cleaner. For now, this hack
will do.
The .text section is already 16-byte aligned by default on all supported
platforms so `SECTION_TEXT` isn't any different from `SECTION .text`.
Signed-off-by: Anton Khirnov <anton@khirnov.net>
Change ALLOC_STACK to always align the stack before allocating stack space for
consistency. Previously alignment would occur either before or after allocating
stack space depending on whether manual alignment was required or not.
Signed-off-by: Anton Khirnov <anton@khirnov.net>
Emulation requires a temporary register if arguments 1 and 4 are the same; this
doesn't obey the semantics of the original instruction, so we can't emulate
that in x86inc.
Also add pmacsdql emulation.
Signed-off-by: Henrik Gramner <henrik@gramner.com>
Signed-off-by: Anton Khirnov <anton@khirnov.net>
As well as tables littered everywhere, functions were spread
out all across the encoder's files. This moves them to a single
place where they can be used by either the encoder's main files
or additional encoder files. Additionally, it changes the type
of some to 'inline' to enable us to simply put them in a header
file and possibly gain some speed due to compiler optimizations.
Signed-off-by: Claudio Freire <klaussfreire@gmail.com>
* commit '5f200bbf98efe50f63d0515b115d2ba8dae297bc':
movenc: Place the sidx index after the initial moov/mdat pair
Merged-by: Hendrik Leppkes <h.leppkes@gmail.com>
* commit '8e34089e265a6b01e1e3301e8864439d26793753':
movenc: Check that frag_info entries exist in mov_write_sidx_tag
Merged-by: Hendrik Leppkes <h.leppkes@gmail.com>
* commit '1542ec96389f32e5081c6c607e4b6f5e257ccdf2':
cosmetics: Drop spurious spaces from if clauses
Conflicts:
libavcodec/vc1_block.c
Merged-by: Hendrik Leppkes <h.leppkes@gmail.com>
* commit '0f562f5b833d603e04123d198c59f8b2b5eb43e4':
h264: Do not print an error when the buffer has to be refilled
Conflicts:
libavcodec/h264.c
Merged-by: Hendrik Leppkes <h.leppkes@gmail.com>
For fragmented files with non-empty moov, with a fragment index
(sidx), place the index after the initial moov/mdat pair.
Previously, for this pathological case, the index was written
at the start of the file.
Signed-off-by: Martin Storsjö <martin@martin.st>
The same field is also used for writing the sidx index header,
for fragmented files, when the faststart flag is used.
Signed-off-by: Martin Storsjö <martin@martin.st>
This fixes crashes with pathological cases when trying to write
a sidx index (via the -movflags faststart option, in combination
with fragmenting options), when no fragments actually have been
written. (This is possible if the empty_moov flag isn't used,
so that all actual packet data is written in the moov/mdat pair,
and no moof/mdat pairs have been written.)
In these pathological cases, no sidx should be written at all.
Signed-off-by: Martin Storsjö <martin@martin.st>
The commit broke sub-movtext and sub-subripenc
fate output differs between mips ad x86 so updating fate ref is not
possible
This reverts commit d670848d4c.
FFplay was using a 5 frame packet buffer, this is not much (e.g. 200 ms for
25fps video), when HLS is requesting a new segment via HTTP, it may take longer
for the request to complete.
Should fix ticket #4720.
Reviewed-by: Michael Niedermayer <michael@niedermayer.cc>
Signed-off-by: Marton Balint <cus@passwd.hu>
Previously the code just appended the strings of flags which
worked with "+bitexact" but would not work with something like "0"
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
This simplifies allocating and initializing swscale contexts with custom options.
The function is internal currently but could be moved into the public header
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Fixes compilation with --disable-everything --enable-encoder=mjpeg
While there, clean up some recursive dependencies.
Reported-by: Bernhard Döbler, programmer bardware de
* commit '9469370fb32679352e66826daf77bdd2e6f067b5':
h264: Use AVERROR return codes instead of -1
Only partially merged, as the first hunk is not correct and would result
in endless log spam.
Merged-by: Hendrik Leppkes <h.leppkes@gmail.com>
This commit moves any tables specific to the encoder from aacenc
and aaccoder to a separate file called 'aacenctab.c/.h'.
This was done as a clean up attempt as the encoder was filled with
tables pasted in between functions which made it confusing to follow
and track where each table and definition had been used.
This commit solves this by simply exporting the smaller tables out to
the aacenctab.h while the larger ones are compiled using aacenctab.c
and are referenced from the header file.
Signed-off-by: Claudio Freire <klaussfreire@gmail.com>
At least the new videotoolbox decoder does not actually set a frame if
end_frame fails. This causes the API to return success and signals that
a picture was decoded, even though AVFrame->data[0] is NULL.
Fix this by propagating end_frame errors.
Compute individual stream durations in matroska muxer.
Write them as string tags in the same format as mkvmerge tool does.
Signed-off-by: Sasi Inguva <isasi@google.com>
The windows SDL audio driver plays the old data in the buffer in a loop if it
is not updated in time. So instead of waiting for data and blocking the the
audio thread, return silence if no data is available.
Should fix ticket #2289.
Reviewed-by: Michael Niedermayer <michael@niedermayer.cc>
Signed-off-by: Marton Balint <cus@passwd.hu>
* commit '98c9ade9853a9c413534ef243174d65f3f7506fa':
drawtext: Move the strftime expansion in a separate function
Not merged, the code does not exist anymore.
Merged-by: Hendrik Leppkes <h.leppkes@gmail.com>
The length of BOOL values is 16 bits in the Metadata Object but
32 bits in the Extended Content Description Object.
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
Change ALLOC_STACK to always align the stack before allocating stack space for
consistency. Previously alignment would occur either before or after allocating
stack space depending on whether manual alignment was required or not.
The FILE struct is opaque in MSVC 2015, and the members of this struct
were never meant to be accessed in any case.
No conditions are known where this check was needed to get characters
from stdin.
This is the same fix that Hendrik made to dxva2_hevc. It should be
equally required here, although I don't see any visual difference.
Nevertheless, best to stay consistent.
The latest nvidia 355.06 drivers fixes the interleaving bug when
video surfaces are rendered. It still seems to be broken for
read-back with getBits but that's sufficiently uninteresting that
I don't think we need to wait for it to remove the flag.
According to S377M, segmented frame layout is identical to separate
field layout except that the two fields are taken from a single scan
of the incoming image, ie: they are coincident in time. Thus the
resulting frame is progressive.
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
On Xcode's clang on OS X, $cc --version will output a 'Configured with:'
line to stderr, which clobbers the configure script output. As this line
serves no further purpose, it should be silenced.
The same applies to apple-gcc 4.2.1, which complains that it can not
understand the kernel version it is running on.
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
On Xcode's clang on OS X, $cc --version will output a 'Configured with:'
line to stderr, which clobbers the configure script output. As this line
serves no further purpose, it should be silenced.
The same applies to apple-gcc 4.2.1, which complains that it can not
understand the kernel version it is running on.
Reviewed-by: Carl Eugen Hoyos <cehoyos@ag.or.at>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Only two functions that use xop multiply-accumulate instructions where the
first operand is the same as the fourth actually took advantage of the macros.
This further reduces differences with x264's x86inc.
Reviewed-by: Ronald S. Bultje <rsbultje@gmail.com>
Signed-off-by: James Almer <jamrial@gmail.com>
I do not think having "git push" as example is a good idea.
The command has a very high chance of pushing things which are unwanted to be
pushed
Reviewed-by: Carl Eugen Hoyos <cehoyos@ag.or.at>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
ucNumDeltaPocsOfRefRpsIdx needs to contain the flat value from the SPS RPS,
and not the final computed value from the slice header RPS, as this calculation
is done internally by the driver again.
Sample-Id: http://trailers.divx.com/hevc/Sintel_4k_27qp_24fps_1aud_9subs.mkvi
The bug was fixed in 1.3.0, so only perform the workaround in earlier versions.
Reviewed-by: "Ronald S. Bultje" <rsbultje@gmail.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
* commit 'fdbc544d29176ba69d67dd879df4696f0a19052e':
asfdec: prevent the memory leak while reading metadata
Merged-by: Hendrik Leppkes <h.leppkes@gmail.com>
* commit '979cb55103fa8e8274806e496901203742c686d1':
hevc: Split the sei parsing in 3 functions
Conflicts:
libavcodec/hevc_sei.c
Merged-by: Hendrik Leppkes <h.leppkes@gmail.com>
* commit '043f46f5741e1a5caedf55d788e1a72aae3b7605':
hevc: Use switch instead of if-nests in decode_nal_sei_message
Conflicts:
libavcodec/hevc_sei.c
Merged-by: Hendrik Leppkes <h.leppkes@gmail.com>
* commit '2cd841c0776535be56e4db67485fdd9509c9b9f4':
hevc: Use a proper enum for the SEI values
Conflicts:
libavcodec/hevc_sei.c
Merged-by: Hendrik Leppkes <h.leppkes@gmail.com>
* commit 'cd4d9df22738e6f147521ccb72c7930db6050914':
asfdec: free AVDictionaries properly when closing the demuxer
Merged-by: Hendrik Leppkes <h.leppkes@gmail.com>
There is an SSE2 implementation so the SSE version is never used. The "SSE"
version also happens to contain SSE2 instructions on x86-64.
Signed-off-by: Anton Khirnov <anton@khirnov.net>
Commit 0a551cbe introduced "activation_bytes" option, and not specifying
this option (while calling ffmpeg / ffprobe) causes the program to quit
early. Before this commit, ffprobe was capable of processing metadata in
.aax files.
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
This commit adds a short description to the aac_coder option of the
AAC encoder in order to be consistent with the other options.
Generally, right now, the 'FAAC' method works fine with speech and
low broadband spectrum audio. 'Fast' is just as the name suggests.
'ANMR' still needs work and 'Twoloop', the default, works well with
every type of audio.
Signed-off-by: Rostislav Pehlivanov <atomnuker@gmail.com>
Extract two methods from decode_registered_user_data in order to improve
code readability. Also make the constant holding the allocation size a
64-bit unsigned integer so that the size comparison against INT_MAX makes
sense.
Bug-Id: CID1312090
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
This commit removes a redundant argument from the functions in aaccoder.
The argument lambda was redundant as it was just a copy of s->lambda,
to which all functions have access to anyway. This cleans up the function
pointers a bit which is helpful as there are a lot of other search_for_*
functions under development and with them populated it gets messy.
Reviewed-by: Claudio Freire <klaussfreire@gmail.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
* commit 'a0797950527120c85263c910eb6ba08fddcfdcb3':
fate/mp3: specify the number of output samples instead of filesize
Merged-by: Michael Niedermayer <michael@niedermayer.cc>
Needed for old compilers like GCC 4.2
Tested by trac user brad. Fixes ticket #4745
Reviewed-by: Michael Niedermayer <michael@niedermayer.cc>
Signed-off-by: James Almer <jamrial@gmail.com>
faults in fate otherwise breaks the terminal.
To reproduce, add a abort() into wav_read_header()
run make fate-acodec-adpcm-ima_wav
This reverts commit 92e62f49cf.
* commit '764ec70149728be82304c163ccc4e280f1629201':
rtsp: Only interpret $ as interleaved packet indicator at the start of replies
Merged-by: Michael Niedermayer <michael@niedermayer.cc>
* commit '6877537ff321136cf78ab03b8b91e6b6f218db5b':
hmac: add missing version bump and APIChanges entry
Conflicts:
libavutil/version.h
version.h is not changed as the code has been added 2 years ago in FFmpeg
See: 82ef67016e
Merged-by: Michael Niedermayer <michael@niedermayer.cc>
* commit '0c73a5a53cc97f4291bbe9e1e68226edf6161744':
hls: Save and forward avio options
Conflicts:
libavformat/hls.c
Merged-by: Michael Niedermayer <michael@niedermayer.cc>
* commit '5ae178539b91d25710b7bb322d156c31aea9f8bf':
http: Add the trailing endlines if they are missing
Merged-by: Michael Niedermayer <michael@niedermayer.cc>
Allow $ as character anywhere within normal RTSP replies - both
within the lines, and as the first character of RTSP header lines.
(The existing old comment indicated that an inline packet could
start at any line within a RTSP reply header, but that doesn't
sound valid to me, and I'm not sure if the existing code
handled that correctly either.)
CC: libav-stable@libav.org
Signed-off-by: Martin Storsjö <martin@martin.st>
* commit 'bf0cef5c3a114df452e5476167634dd8f51eb448':
checkasm: Include io.h for isatty, if available
Merged-by: Michael Niedermayer <michael@niedermayer.cc>
configure does check for isatty, and checkasm properly checks
HAVE_ISATTY, but on some platforms (e.g. WinRT), io.h needs to be
included for isatty to be available.
Signed-off-by: Martin Storsjö <martin@martin.st>
The test code is updated with some cosmetics to avoid the loop
using undefined AVHMACType values.
The old enum values will be removed in the next major bump, effectively
making both projects synced and without API or ABI issues.
Reviewed-by: Michael Niedermayer <michael@niedermayer.cc>
Signed-off-by: James Almer <jamrial@gmail.com>
* commit '65dd6a1f84cc5c9a91d279e8e8b72ff7adf58d31':
rtmpproto: use AVHMAC instead of a custom implementation
See: 6c87b86628
Merged-by: Michael Niedermayer <michael@niedermayer.cc>
There can be other headers than "Content-Type:" (in this case, a
"Content-Length:" header was following), so checking for a trailing
newline is wrong.
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Also replace custom tests for MD5 with those published in RFC 2202
Signed-off-by: James Almer <jamrial@gmail.com>
Signed-off-by: Martin Storsjö <martin@martin.st>
2nd channel makes sense only for CPE type.
Skip 2nd channel in preparation for resampler (in spectral_to _sample())
depending on block type.
Fixes fate failure with clang ftrapv.
Signed-off-by: Nedeljko Babic <nedeljko.babic@imgtec.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Fixes some files from Ticket679
This also changes subtitles to 4:2:0 matching the output format and thus
simplifying the blend code.
This restricts placement to the chroma sample resolution though, speak up
if you consider this a problem, say so, the code could be changed to use
YUV444 for subtitles and scaling them down while blending, this would be
slower though.
The current code only uses a single swscale context and reinitializes it
as needed, this could be changed as well if needed
Reviewed-by: Marton Balint <cus@passwd.hu>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
This makes it possible to remove more coded_frame usage without breaking the
publically visible coded_frame
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
* commit 'c6e0829e3696c894d24c8088c3ee30a9c17534c2':
configure: Don't force _WIN32_WINNT to an older version if targeting winphone/winrt
Merged-by: Michael Niedermayer <michael@niedermayer.cc>
* commit 'd75b55635a02444c2f188c26e431a1cec992babe':
dxva2/d3d11va: Set _WIN32_WINNT to 0x0602 instead of 0x0600
Merged-by: Michael Niedermayer <michael@niedermayer.cc>
This commit replaces the 1 microsecond delay by 500 microsecond for the
case when the MFX library does return MFX_WRN_DEVICE_BUSY status.
In general this warning never appears for simple encoding or
transcoding session because the GPU is so fast so it almost always is not busy and
any delay value just does not executes.
But for heavy transcoding tasks for example, when several QSV sessions
are running simultaneously then using a 1-microsecond delay may
result in 1000 iterations per each frame.
So here possible a paradoxical case when GPU loading also loads CPU by dummy tasks.
Official MFX/QSV samples by Intel are using 1 millisecond (i.e. 1000
microseconds) everywhere where MFX_WRN_DEVICE_BUSY does appear.
So 500us is a much more optimal value than 1us.
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
There was fixed number of loops (2048) in preparation for resampler, so
when number of samples is smaller than this, there would be an overflow on
ret_buf.
For some reason this behavior popped out only under valgrind with
--disable-memory-poisoning option.
This is now fixed and number of loops depends on actual number of samples.
Signed-off-by: Nedeljko Babic <nedeljko.babic@rt-rk.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
This avoids having to manually set _WIN32_WINNT in --extra-cflags
when targeting these API families, which only was necessary to
work around configure setting _WIN32_WINNT to an older version
by default.
Signed-off-by: Martin Storsjö <martin@martin.st>
If _WIN32_WINNT is unset, we force it to a new enough value to
make sure the necessary definitions are visible.
When targeting Windows Phone or Windows RT, _WIN32_WINNT should
be at least 0x0602 - otherwise the windows headers themselves
can cause errors (which technically are bugs in the headers).
Raising this value here shouldn't hurt; the alternative would
be to not touch it at all if WINAPI_FAMILY is set to phone/app,
or to force setting it to 0x0602 in configure if unset (for phone/app).
Signed-off-by: Martin Storsjö <martin@martin.st>
In version 10.4 of the DeckLink SDK, GetBufferedAudioSampleFrameCount() was changed to take an unsigned int instead of an unsigned long.
Signed-off-by: Chris Spencer <spencercw@gmail.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
* commit 'b7040e67ec18259ca634a0e29d98469b3484a87c':
h264: fix AVDISCARD_NONKEY for some interlaced content
Conflicts:
libavcodec/h264.c
Not merged, the used field is not initialized where it is used
Merged-by: Michael Niedermayer <michael@niedermayer.cc>
* commit 'b5c1c16247ab7d166c84eaf4564e49a1535fdaaf':
asfdec: do not align Data Object when Broadcast Flag is set
Merged-by: Michael Niedermayer <michael@niedermayer.cc>
* commit 'db21dde3f72c2331653399bdb8745350f015d847':
qsvdec_mpeg2: drop an incorrect comment
Conflicts:
libavcodec/qsvdec_mpeg2.c
No change as the removed comment was not in libavcodec/qsvdec_mpeg2.c
Merged-by: Michael Niedermayer <michael@niedermayer.cc>
* commit '3ee217853a6741b829a2683f49c590618891b1ab':
Support the Hap chunked frame format
Conflicts:
libavcodec/hap.h
libavcodec/hapdec.c
libavcodec/version.h
See: c7e6443441
Merged-by: Michael Niedermayer <michael@niedermayer.cc>
* commit '43dd004747fa697396b47d034a80e069facbea09':
hap: Move some per-stream setup into decoder init rather than per-frame
Conflicts:
libavcodec/hapdec.c
See: 6074956fa1
Merged-by: Michael Niedermayer <michael@niedermayer.cc>
When skip_frame is set to _NONKEY the decoder skips everything except intra
slices, which breaks frames that consist of an intra field together with any
other field type; half the frame becomes garbage. This patch fixes the issue by
letting non-intra slices through if they're part of a keyframe.
Signed-off-by: Anton Khirnov <anton@khirnov.net>
This change will reject frames with a texture type which does not match
the stream description.
Signed-off-by: Vittorio Giovara <vittorio.giovara@gmail.com>
This option is extremely codec specific and only a few codecs employ it.
Move it to codec private options instead: mpegenc family supports only 3
values, xavs and x264 use 5, and xvid has a different metric entirely.
Signed-off-by: Vittorio Giovara <vittorio.giovara@gmail.com>
This macro identifies whether VFPv3 is available; MSVC defaults
to hardfloat (except for older MSVC versions for CE, targeting
ARMv4).
Signed-off-by: Martin Storsjö <martin@martin.st>
* commit 'a67b67944aa9e6e794934d15f9fd9a9cf7173e09':
ac3enc_template: Use the correct context field
See: 320ce9f284
Merged-by: Michael Niedermayer <michael@niedermayer.cc>
it is not optimal when the buffer size is well known at allocation time
This avoids a memcpy()
about 1% faster
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
This parameter can be used to inform the allocation code about how much
downsizing might occur, and can be used to optimize how to allocate the
packet
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Avoid clipping due to quantization noise to produce audible
artifacts, by detecting near-clipping signals and both attenuating
them a little and encoding escape-encoded bands (usually the
loudest) rounding towards zero instead of nearest, which tends to
decrease overall energy and thus clipping.
Currently fate tests measure numerical error so this change makes
tests using asynth (which are near clipping) report higher error
not less, because of window attenuation. Yet, they sound better,
not worse (albeit subtle, other samples aren't subtle at all).
Only measuring psychoacoustically weighted error would make for
a representative test, so that will be left for a future patch.
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Failure should not be possible, if it does occur then the code is
buggy and should be fixed not silently clip
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
* commit '60a21b3d81c1a11cf5a08950eadd4e84ca2e597c':
configure: Check for _M_ARMT to detect thumb when using MSVC
Conflicts:
configure
Merged-by: Michael Niedermayer <michael@niedermayer.cc>
* commit '2192ff84dd720968108bc1ca54e239f4c94eb61d':
configure: Default to armasm for --toolchain=msvc when targeting arm
Merged-by: Michael Niedermayer <michael@niedermayer.cc>
* commit '6d3081e6c374ff7da12b07ed33d1662be1b32dbc':
doc: Remove the now unnecessary remark about PATH and link.exe
Merged-by: Michael Niedermayer <michael@niedermayer.cc>
* commit '9e8627a1ff9207b9e272d248da2e1bd0cc6fe2fe':
asfdec: interpret the first flag in an asf packet as length flag
Merged-by: Michael Niedermayer <michael@niedermayer.cc>
* commit '342b0ba5f93b09b1d0c2597db44605300e6fcc53':
configure: Only redirect strtoll to _strtoi64 if necessary
Conflicts:
configure
Merged-by: Michael Niedermayer <michael@niedermayer.cc>
* commit '5fd553d31272d5ed42a7a5a0ecaab7b3452da83a':
configure: Only redefine inline to __inline for msvc if necessary
Conflicts:
configure
Merged-by: Michael Niedermayer <michael@niedermayer.cc>
* commit '0cff125200ab53fa3ae70d85b4f614f269fe3426':
configure: Only add -FIstdlib.h for msvc/icl if necessary
Conflicts:
configure
Merged-by: Michael Niedermayer <michael@niedermayer.cc>
* commit '9b4b96c0dee90d260891ec765b28f6ca15594340':
force WINAPI_FAMILY to WINAPI_FAMILY_DESKTOP_APP to be able to use dxva.h
Conflicts:
libavcodec/dxva2_internal.h
See: c5327df838
Merged-by: Michael Niedermayer <michael@niedermayer.cc>
The struct definitions in dxva.h, which are necessary in order to
actually use d3d11va, are hidden when WINAPI_FAMILY targets Windows Phone
or WindowsRT.
Building with WINAPI_FAMILY=WINAPI_FAMILY_DESKTOP_APP is disallowed
when targeting ARM. ("Compiling Desktop applications for the ARM
platform is not supported.") So we set _CRT_BUILD_DESKTOP_APP to 0
to tell the runtime not to detect some issues with this mismatching.
The same tweaks to detect if the API is available is done in dxva2_internal.h
when compiling each DXVA2/D3D11VA decoders.
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
This is only necessary on MSVC 2010/2012 (and possibly on some
ICL versions). This both avoids an extra hack on newer MSVC
versions, and better documents what the extra compiler option
is used for.
Signed-off-by: Martin Storsjö <martin@martin.st>
The struct definitions in dxva.h, which are necessary in order to
actually use d3d11va, are hidden when WINAPI_FAMILY targets Windows Phone
or WindowsRT.
Building with WINAPI_FAMILY=WINAPI_FAMILY_DESKTOP_APP is disallowed
when targeting ARM. ("Compiling Desktop applications for the ARM
platform is not supported.") So we set _CRT_BUILD_DESKTOP_APP to 0
to tell the runtime not to detect some issues with this mismatching.
The same tweaks to detect if the API is available is done in dxva2_internal.h
when compiling each DXVA2/D3D11VA decoders.
Signed-off-by: Martin Storsjö <martin@martin.st>
Add support for fontsize in style records. The patch uses reset to
directly change back to default style instead of using closing tags,
since we are not handling the default styles right now.
Signed-off-by: Niklesh <niklesh.lalwani@iitb.ac.in>
This also switches to using a separate AVCodecContext for the inner mjpeg decoder
which is cleaner and avoids fields from being overwritten with wrong values
Fixes Ticket162
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Fixes displaying subtitles before any CLUT has been received
Fixes Ticket153
This will of course not display these initial subtitles in the correct
color (as that is not known at that point) but they should look clean
and not corrupted
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Silences warnings when using -Wshift-overflow (GCC 6+)
Reviewed-by: Michael Niedermayer <michael@niedermayer.cc>
Signed-off-by: James Almer <jamrial@gmail.com>
* commit 'bf52f773913cf74bdf0d2c8c2cb4473fa1b7801e':
lavc: add Intel libmfx-based MPEG2 decoder.
Conflicts:
configure
libavcodec/qsvdec_mpeg2.c
Some cosmetics merged, rest is related to the removed parser code and
thus not merged
Merged-by: Michael Niedermayer <michael@niedermayer.cc>
* commit '96dca089b19bf55293136277f5b081c56146e10e':
qsvdec: move qsv_process_data() from qsvdec_h264 to the common code
Conflicts:
libavcodec/qsvdec.c
libavcodec/qsvdec_h264.c
No change as the parser code has been removed
Merged-by: Michael Niedermayer <michael@niedermayer.cc>
* commit '22522d9c2c69624fe4d81d61ee65a56610f22f1d':
qsvdec: fix a memleak of async_fifo
Conflicts:
libavcodec/qsvdec.c
Merged-by: Michael Niedermayer <michael@niedermayer.cc>
* commit 'aa9d15d89bb4ee8a31607d3db1b8c5334eb88d2d':
qsvdec: avoid an infinite loop with no consumed data and no output
Conflicts:
libavcodec/qsvdec.c
Merged-by: Michael Niedermayer <michael@niedermayer.cc>
This side data does not serve or improve decoding the data, it thus
would semantically be metadata and not side data.
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
This is triggerable with the HEVC decoder. It is unclear yet whether the
bug is in the calling code or the MSDK, but it seems better to check for
this in any case.
Otherwise it would get translated like a library path (-L option),
which breaks setting the flag.
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
* commit 'c9edbe4af901e9bc9f05a62319637f9760df9a4a':
use a wrapper script to call MS link.exe to avoid mixing with /usr/bin/link.exe
See: 58ed7b6328
Merged-by: Michael Niedermayer <michael@niedermayer.cc>
favor link over link.exe in case some wrapper script already exists
fallback to "link" in the path if the one next to cl is not found
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
* commit 'a54e720e0289433d6bc3f7ba0a37fa5cabfaeea9':
configure: force -nologo- when detecting MSVC
Conflicts:
configure
Merged-by: Michael Niedermayer <michael@niedermayer.cc>
* commit '44f7df0c987965763c609f6dc36974b04182e58d':
dds: Write the palette in the native endian form
Conflicts:
libavcodec/dds.c
See: 36a87c2dc7
Merged-by: Michael Niedermayer <michael@niedermayer.cc>
The -nologo- option is the inverse of -nologo, reenabling printing the
"logo" version header. This is useful if the compiler actually is a
wrapper that forces -nologo.
Signed-off-by: Martin Storsjö <martin@martin.st>
this condition breaks reading from the pipe as data_reached variable
have to be set to break while in the asf_read_header just after the Data
Object is found
Signed-off-by: Anton Khirnov <anton@khirnov.net>
A bug was introduced in 977105407c whereby when
frame height wasn't divisible by the number of threads, pixels would be omitted
from the bottom rows during decode.
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
A bug was introduced in 6b2b26e7af whereby when
frame height wasn't divisible by the number of threads, pixels would be omitted
from the bottom rows during decode.
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
The current code expects query_formats() to be called exactly once, it
will leak if it's not called at all (filter initialized, but never
configured or used) or try to read freed memory if it's called more than
once.
Found-by: James Almer <jamrial@gmail.com>
CC: libav-stable@libav.org
* commit 'aed7715b8fa295980c221f1cd095d42cd3bd74a6':
asfdec: increment nb_streams right after the stream allocation
Merged-by: Michael Niedermayer <michael@niedermayer.cc>
* commit 'ee80f834cbb6dbacdc1efb4c658a7d775e82ebff':
asfdec: set nb_streams to 0 in the asf_read_close
Merged-by: Michael Niedermayer <michael@niedermayer.cc>
Fixes compilation of host tool aacps_fixed_tablegen
Reviewed-by: Michael Niedermayer <michael@niedermayer.cc>
Signed-off-by: James Almer <jamrial@gmail.com>
Use macros from aac_defines.h for adding suffixes
instead of local macros.
Signed-off-by: Nedeljko Babic <nedeljko.babic@imgtec.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
The test file they use needs avdevice to be created
Probably fixes Ticket 4455
Reviewed-by: James Almer <jamrial@gmail.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
The stats are a superset of the quality factor, also allowing the picture type and encoder "PSNR" stats to be exported
This also replaces the native by fixed little endian order for the affected side data
AV_PKT_DATA_QUALITY_FACTOR is left as a synonym of AV_PKT_DATA_QUALITY_STATS
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
* commit '2a187a074a7f5ad9f01f72ac9715ddfcb2dbb8ec':
asfdec: avoid crash in the case when chunk_len is 0 or pkt_len is 0
Merged-by: Michael Niedermayer <michael@niedermayer.cc>
* commit '93f16f338f9e8aba0c006752eb3afc3fe6e137fd':
asfdec: close the demuxer properly when read_header is failing
Merged-by: Michael Niedermayer <michael@niedermayer.cc>
* commit '5655236a67203d923755f285584c6e68abe7e33f':
asfdec: factor out seeking to the Data Object outside while
Merged-by: Michael Niedermayer <michael@niedermayer.cc>
* commit 'ecee1148af4989e1f9e16f0cdc9f98ad2045538c':
qsvenc_hevc: use the correct HW plugin UID
Merged-by: Michael Niedermayer <michael@niedermayer.cc>
* commit 'e605bf3b590d295f215fcc9fd58eb11be55b68cb':
checkasm: remove empty array initializer list in h264pred test
Merged-by: Michael Niedermayer <michael@niedermayer.cc>
This should not change anything as the spec requires specific values
for the fields, which where handled previously.
Ask for samples when these values do not match
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
This patch takes care of the secondary color changes in ASS through highlight and hilightcolor boxes.
Signed-off-by: Niklesh <niklesh.lalwani@iitb.ac.in>
This patch reorganizes the code to make it easier to add support for different text modifier boxes and other styles in the future.
Signed-off-by: Niklesh <niklesh.lalwani@iitb.ac.in>
And prevent eventual compilation failures once the relevant functions
and fields are removed.
Reviewed-by: Michael Niedermayer <michael@niedermayer.cc>
Signed-off-by: James Almer <jamrial@gmail.com>
It's done automatically by avcodec_open2() now.
Fixes memleaks in fate-libavcodec-options.
Reviewed-by: Michael Niedermayer <michael@niedermayer.cc>
Signed-off-by: James Almer <jamrial@gmail.com>
* commit '219b39a71a5694b1c14a07b86477f665a5b6849b':
parseutil: Use non ambiguous aliases for uhd
Conflicts:
doc/ffmpeg.texi
libavutil/parseutils.c
Merged-by: Michael Niedermayer <michael@niedermayer.cc>
This commit moves the generation of ff_aac_pow34sf_tab[] out of the
encoder and into the table generator. The original commit log for
this table in 2011 actually mentions that it should be moved outside
but this never happened.
This is the first commit which cleans up the encoder a little.
Reviewed-by: Claudio Freire <klaussfreire@gmail.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Enjoy some cache locality and use less threads.
About 5x speedup (from 60ms to 12ms to decode a 4k frame).
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
* commit '9ed6f9a17cc1f7d3699a1223783dadc1ee222069':
arm: use a local label instead of the function symbol in ff_prefetch_arm
See: cab6302534
Merged-by: Michael Niedermayer <michael@niedermayer.cc>
With side data now being added to every MPEG*/H26* video encoder
in the form of a quality scalar, software which simply stores
the pkt->data to get an ES stream would break.
This also as a side-effect makes the code faster
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
* commit '5d3addb937946eca5391e40b5e6308e74ac6f77b':
Add a quality factor packet side data
Conflicts:
doc/APIchanges
ffmpeg.c
libavcodec/avcodec.h
libavcodec/mpegvideo_enc.c
libavcodec/version.h
Merged-by: Michael Niedermayer <michael@niedermayer.cc>
* commit '75c1ed2e4c7250f5e75a11d0140727054ff0136b':
ffv1enc: Use input frame to set SAR and interlacing
Conflicts:
libavcodec/ffv1enc.c
No change as the removed coded_frame uses where not in the code anymore
Merged-by: Michael Niedermayer <michael@niedermayer.cc>
* commit 'd6006dd9f0d4d01023359230212f1f9fa4800e5b':
libvpxenc: Do not entangle coded_frame
Conflicts:
libavcodec/libvpxenc.c
Merged-by: Michael Niedermayer <michael@niedermayer.cc>
* commit '56672aeaee19216d2fd8eeb9964b1f71f0af2919':
svq1enc: Do not entangle coded_frame
Conflicts:
libavcodec/svq1enc.c
Merged-by: Michael Niedermayer <michael@niedermayer.cc>
* commit '05fb4c9aaf84b59f8ab1ce8d4c0f49dd12113024':
proresenc: Do not entangle coded_frame
Conflicts:
libavcodec/proresenc_kostya.c
Merged-by: Michael Niedermayer <michael@niedermayer.cc>
* commit '91767360d86ac786571593ab11c7291010ab3829':
a64multienc: Do not entangle coded_frame
Conflicts:
libavcodec/a64multienc.c
Merged-by: Michael Niedermayer <michael@niedermayer.cc>
The C functions return uint8/16_t but that is effectively int not unsigned int
Fixes fate-filter-tblend
We do not return uint8/16_t as that would require the compiler to truncate the
values, slowing it down.
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
The rationale is that coded_frame was only used to communicate key_frame,
pict_type and quality to the caller, as well as a few other random fields,
in a non predictable, let alone consistent way.
There was agreement that there was no use case for coded_frame, as it is
a full-sized AVFrame container used for just 2-3 int-sized properties,
which shouldn't even belong into the AVCodecContext in the first place.
The appropriate AVPacket flag can be used instead of key_frame, while
quality is exported with the new AVPacketSideData quality factor.
There is no replacement for the other fields as they were unreliable,
mishandled or just not used at all.
Signed-off-by: Vittorio Giovara <vittorio.giovara@gmail.com>
This is necessary to preserve the quality information currently exported
with coded_frame. Add the new side data to every encoder that needs it,
and use it in avconv.
Signed-off-by: Vittorio Giovara <vittorio.giovara@gmail.com>
Allocating coded_frame is what most encoders do anyway, so it makes
sense to always allocate and free it in a single place. Moreover a lot
of encoders freed the frame with av_freep() instead of the correct API
av_frame_free().
This bring uniformity to encoder behaviour and prevents applications
from erroneusly accessing this field when not allocated. Additionally
this helps isolating encoders that export information with coded_frame,
and heavily simplifies its deprecation.
Signed-off-by: Vittorio Giovara <vittorio.giovara@gmail.com>
This change (and the following ones of the same kind) is mainly to
simplify wrapping this section with an #if FF_API block later on.
No functional changes are applied, the fields of the context coded_frame
fields are directly initialized, instead of keeping a reference to the
coded_frame itself.
Signed-off-by: Vittorio Giovara <vittorio.giovara@gmail.com>
Fixes Ticket4664
The changed fate tests lack red/blue shades and thus look correct
either way
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
* commit '6b15874fc2c3f565732201f7907ae1112727d6ae':
af_resample: do not touch the timestamps if we are not resampling
Merged-by: Michael Niedermayer <michael@niedermayer.cc>
* commit '1959351aecf09fc3e90208ff775f4849801dc13f':
avconv: move the no streams failure to open_output_file()
Merged-by: Michael Niedermayer <michael@niedermayer.cc>
* commit 'bd2ab27c488ae92c7820efe11d4f53d84e94d58e':
avconv: use read_file() for reading the 2pass stats
Conflicts:
cmdutils.c
cmdutils.h
ffmpeg_opt.c
Merged-by: Michael Niedermayer <michael@niedermayer.cc>
* commit '59245e0c5e10a849e67c632cccf4f677b2442e82':
avconv: set the encoding/decoding_needed flags earlier
Conflicts:
ffmpeg.c
Merged-by: Michael Niedermayer <michael@niedermayer.cc>
* commit '56c2f37727015212a404cae0f444d8bc8704d691':
avconv: drop update_sample_fmt()
Conflicts:
ffmpeg.c
No change as the removed code is not in FFmpeg
Merged-by: Michael Niedermayer <michael@niedermayer.cc>
* commit '2883ef34b59c9b427c4cfad4620c3235e5778406':
asfdec: read the replicated data in a separate function
Merged-by: Michael Niedermayer <michael@niedermayer.cc>
* commit '0989d3ad1fbd7509815208b0a5792918492d2a68':
asfdec: convert condition for the replicated data reading to be safer
Merged-by: Michael Niedermayer <michael@niedermayer.cc>
* commit '406627287e015ce381795e85e2557b12bf60ca35':
asfdec: do not read replicated data when their length is 0
Merged-by: Michael Niedermayer <michael@niedermayer.cc>
This filter currently assumes that the input audio is continuous and
does some timestamps manipulation based on this assumption.
This is unnecessary if we are only converting the channel layout or the
sample format, without resampling. In such a case, just leave the
timestamps as they are.
The current code is less than straightforward due to the fact that
output streams can be created based on filtergraph definitions. This
change should make the code simpler and more readable. It will also be
useful in the future commits.
Since global options are processed before all the other options now, we
do not have to try creating the complex filtergraphs several times
anymore, it is enough to do it once after the input files are opened.
There is only one decoder left that supports this (libopus, which is not
used by default since we have a native one) and this code goes against
the avconv design, since it propagates information back from the encoder
to decoder.
Recent ICC versions that define GCC as >= 4.5 (like ICC 13) apparently can't
optimize the generic C versions of av_bswap*() on their own.
Reviewed-by: Michael Niedermayer <michaelni@gmx.at>
Signed-off-by: James Almer <jamrial@gmail.com>
Intel compiler also defines __GNUC__, so the Intel specific intrinsics were not
really being used.
Reviewed-by: Michael Niedermayer <michaelni@gmx.at>
Signed-off-by: James Almer <jamrial@gmail.com>
avoids null pointer dereference
Fixes: signal_sigsegv_d5de40_964_vp80-00-comprehensive-010.ivf with memlimit of 1048576
Found-by: Samuel Groß, Mateusz "j00ru" Jurczyk and Gynvael Coldwind
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Fixes: signal_sigsegv_d5de23_967_vp80_00_comprehensive_010.ivf with memlimit 524288
Found-by: Samuel Groß, Mateusz "j00ru" Jurczyk and Gynvael Coldwind
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Fixes null pointer dereference
Fixes: signal_sigsegv_b02a96_280_RL_420p_ffdirac.drc with memlimit of 67108864
Found-by: Samuel Groß, Mateusz "j00ru" Jurczyk and Gynvael Coldwind
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Avoids leaving stale pointers
Fixes: signal_sigabrt_7ffff70eccc9_819_sabtriple.rm with memlimit 536870912
Found-by: Samuel Groß, Mateusz "j00ru" Jurczyk and Gynvael Coldwind
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
* commit '82e6ac85ff9aa7631b8c01521b3d6b5ca0bc8014':
checkasm: test all architectures with optimisations
Merged-by: Michael Niedermayer <michael@niedermayer.cc>
* commit 'cb33f8d0f48b1e9d642ca1cbea142dcbedd08a27':
checkasm: Give macro a body to avoid potential unexpected syntax issues
See: a39512ba9e
Merged-by: Michael Niedermayer <michael@niedermayer.cc>
* commit '6cc4d3e9a982e926494f4b919d9733fe29774acf':
checkasm: exit with status 0 instead of 1 if there are no tests to perform
Merged-by: Michael Niedermayer <michael@niedermayer.cc>
* commit '256ef19844892c6cf8e0386e3287bae970ec6320':
h264: arm: use intra pred8x8 functions only for chroma_format_idc <= 1
Conflicts:
libavcodec/arm/h264pred_init_arm.c
See: 565cabf5c8
Merged-by: Michael Niedermayer <michael@niedermayer.cc>
* commit 'e1319aa1c1be9b64117c19170344fb78841dd67c':
libx264: Add support for the MPEG2 encoder
Conflicts:
configure
libavcodec/Makefile
libavcodec/libx264.c
Merged-by: Michael Niedermayer <michael@niedermayer.cc>
Fixes: signal_sigabrt_7ffff70eccc9_498_divx502.avi with memlimit 1572864
Found-by: Samuel Groß, Mateusz "j00ru" Jurczyk and Gynvael Coldwind
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
The upper halves are not guaranteed to be zero in x86-64.
Also use `test` instead of `and` when the result isn't used for anything other
than as a branch condition, this allows some register moves to be eliminated.
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
* commit '0cf5588d69922aa3e063bac6304c09c543a9ef52':
hq_hqa: Fix decoding when INFO section is absent
Merged-by: Michael Niedermayer <michael@niedermayer.cc>
* commit 'a53540840d26beb57a5e53b7f488c23ddf86e193':
APIchanges: Mention lavfi and lavd identification symbol addition
Conflicts:
doc/APIchanges
No change as these symbols have been added a very long time ago to FFmpeg
and are already listed in APIchanges
Merged-by: Michael Niedermayer <michael@niedermayer.cc>
* commit 'f1840b070dd449ad25e1ebbab463f10863a5e0f1':
Revert "mov: Double-check that alias path is not an absolute path"
Conflicts:
libavformat/mov.c
See: c9c7263e58
Merged-by: Michael Niedermayer <michael@niedermayer.cc>
Decays and attacks where by default set only for first channel
which caused poor defaults to be used which produced clipping
on any higher channel.
Reported-by: lachs0r
Signed-off-by: Paul B Mahol <onemda@gmail.com>
Export symbols by name rather then ordinal.
Remove PROTMODE directive as it does not make sense for 32 bit library.
Also silences a warning from some linkers.
Signed-off-by: Dave Yeo <dave.r.yeo@gmail.com>
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
* cehoyos/master:
lavfi/af_pan: Support a maximum of 64 channels.
lswr: Allow 64 channels internally.
lavc: Allow 64 channels internally.
Merged-by: Michael Niedermayer <michael@niedermayer.cc>
This is needed later for outpoint support which may leave the last file in a
not-eof state.
Reviewed-by: Nicolas George <george@nsup.org>
Signed-off-by: Marton Balint <cus@passwd.hu>
Some uses of Snappy require uncompressing to positions within an existing buffer. Also adds a function to get the uncompressed length of Snappy data.
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
This change will reject frames with a texture type which doesn't match the stream description.
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
This patch adds MSA (MIPS-SIMD-Arch) optimizations for VP9 MC functions in new file vp9_mc_msa.c
Signed-off-by: Shivraj Patil <shivraj.patil@imgtec.com>
Reviewed-by: "Ronald S. Bultje" <rsbultje@gmail.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Fixes: b4b47bc2b3fb7ca710bfffe5aa969e37_signal_sigabrt_7ffff70eccc9_744_nc_sample2.avi with memlimit of 4194304
Found-by: Samuel Groß, Mateusz "j00ru" Jurczyk and Gynvael Coldwind
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
* commit '4512ee78e19fdb011bdec1b3a8dc0b315c82a81e':
mpegts: Mark the muxer as supporting variable fps
Merged-by: Michael Niedermayer <michael@niedermayer.cc>
* commit 'c88c5eef53ff1619724ba47b722da64ec0593dab':
hevc: Split the struct setup from the pps parsing
Conflicts:
libavcodec/hevc_ps.c
Merged-by: Michael Niedermayer <michael@niedermayer.cc>
Fixes use of uninitialized memory
Fixes: a96874b9466b6edc660a519c7ad47977_signal_sigsegv_7ffff713351a_744_nc_sample.avi with memlimit 2147483648
Found-by: Samuel Groß, Mateusz "j00ru" Jurczyk and Gynvael Coldwind
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
With gcc-4.9.2 loongson faild in test fate-dca, this is caused by option
-fexpensive-optimizations in -O3 optimization. We disable it temporarily
before the bug been fixed up.
Signed-off-by: ZhouXiaoyong <zhouxiaoyong@loongson.cn>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Speed of all modes increased by a factor between 7.4 and 19.8 largely depending
on whether bytes are unpacked into words. Modes 2, 3, and 4 have been sped-up
by a factor of 43 (thanks quick sort!)
All modes are available on x86_64 but only modes 1, 10, 11, 12, 13, 14, 19, 20,
21, and 22 are available on x86 due to the number of SIMD registers used.
With a contribution from James Almer <jamrial@gmail.com>
Possibly fixes Ticket4671
the removed check is wrong and insufficient
Based on patch by Maksym Veremeyenko <verem@m1.tv>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
The internal line accumulator for 16bit can overflow, so I changed that
from int to uint64_t in the C code. The matching assembly looks a little
weird but output looks correct.
(avx2 should be trivial to add later.)
Reviewed-by: Paul B Mahol <onemda@gmail.com>
Reviewed-by: James Almer <jamrial@gmail.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Fixes: 39a25908b84604acdaa490138282d091_signal_sigsegv_7ffff713351a_331_WAWV.avi with memlimit of 262144
Found-by: Samuel Groß, Mateusz "j00ru" Jurczyk and Gynvael Coldwind
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Fixes: 260813283176b57b3c9974fe284eebc3_signal_sigsegv_7ffff713351a_991_xtrem_e2_m64q15_a32sxx.3gp with memlimit of 262144
Found-by: Samuel Groß, Mateusz "j00ru" Jurczyk and Gynvael Coldwind
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Fixes: 1013dbde2c360d939cc2dfc33e4f275c_signal_sigsegv_a0500f_45_320vp3.nsv with memlimit of 536870912
Found-by: Samuel Groß, Mateusz "j00ru" Jurczyk and Gynvael Coldwind
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Fixes: 18615ff56beedc63a884a8db0678b47c_signal_sigsegv_7ffff713351a_991_xtrem_e2_m64q15_a32sxx.3gp with memlimit of 524288
Found-by: Samuel Groß, Mateusz "j00ru" Jurczyk and Gynvael Coldwind
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
* commit 'a5a6a786bfebb85c269abc25559fd71963983581':
mp3: Forward seeking errors
Conflicts:
libavformat/mp3dec.c
No change as the avio_seek() that are part of seeking in mp3 are already
checked in FFmpeg
Merged-by: Michael Niedermayer <michael@niedermayer.cc>
* commit '8e373fe048812a25b238ea60a7052b8c07639a42':
hevc: Factor out the pixel format mapping from the sps parser
Conflicts:
libavcodec/hevc_ps.c
Merged-by: Michael Niedermayer <michael@niedermayer.cc>
* commit 'c571424c7f6276a6374e1784ce2a33d4b6a4292d':
asfdec: prevent memory leaks found with Coverity Scan
Merged-by: Michael Niedermayer <michael@niedermayer.cc>
Fixes: 0d0a2bace067d09c08f0fa5340496c23_signal_sigsegv_7ffff713351a_342_WobblyWindowsIntro.avi with memlimit of 67108864
Found-by: Samuel Groß, Mateusz "j00ru" Jurczyk and Gynvael Coldwind
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Fixes: 09e670595acbdafb226974b08dab66e3_signal_sigabrt_7ffff70eccc9_991_xtrem_e2_m64q15_a32sxx.3gp with memlimit of 1048576
Found-by: Samuel Groß, Mateusz "j00ru" Jurczyk and Gynvael Coldwind
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Fixes null pointer dereferences
Fixes: af1a5a33e67e479f439239097bd0d4fd_signal_sigsegv_7ffff713351a_152_Dolby_Rain_Logo.pmp with memlimit of 8388608
Found-by: Samuel Groß, Mateusz "j00ru" Jurczyk and Gynvael Coldwind
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
If it's not, then the new dependence-free parser will be used instead
Reviewed-by: Michael Niedermayer <michaelni@gmx.at>
Signed-off-by: James Almer <jamrial@gmail.com>
Fixes: af94b3a3d26586c08f557cafe8246251_signal_sigsegv_7ffff713351a_343_XFMode.ASF with 2097152 alloc limit
Found-by: Samuel Groß, Mateusz "j00ru" Jurczyk and Gynvael Coldwind
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Fixes: af94b3a3d26586c08f557cafe8246251_signal_sigsegv_7ffff713351a_343_XFMode.ASF with 1048576 alloc limit
Found-by: Samuel Groß, Mateusz "j00ru" Jurczyk and Gynvael Coldwind
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
* commit 'b9f76d19d81fbc7f088536f966c2d3dc23c34ddc':
hevc_ps: make sure failing to decode an SPS always returns an error
Conflicts:
libavcodec/hevc_ps.c
See: 15893adbdb
Merged-by: Michael Niedermayer <michael@niedermayer.cc>
* commit '077b55943330150db0eafd36bbee614697cabd98':
hevc: handle a NULL sps in set_sps() properly
Merged-by: Michael Niedermayer <michael@niedermayer.cc>
* commit '18156b53f9b642b71c182c5c9818175a61572d2b':
hevc: do not pass an entire HEVCContext into export_stream_params()
Merged-by: Michael Niedermayer <michael@niedermayer.cc>
Fixes crash in 1288a2fe8e9ae6b00ca40e089d08ca65_signal_sigsegv_7ffff71426a7_354_accident.san with allocation limit 65536
Found-by: Samuel Groß, Mateusz "j00ru" Jurczyk and Gynvael Coldwind
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Fixes: 06a4edb39ad8a9883175f9bd428334a2_signal_sigsegv_7ffff713351a_706_mov__alac__ALAC_6ch.mov
Found-by: Samuel Groß, Mateusz "j00ru" Jurczyk and Gynvael Coldwind
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Theres no known case where its use on local files improves performance
if you know of such a case, please contact us
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
internal.h is difficult to use due to circular dependancies
mem.h is a public header ff_* is not public
Alternative solutions probably are possible too
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Feel free to use either, they both work but the old one provides
more information but needs the hevc decoder
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
* commit 'd82e1adc2019135a2fc45372e0ed0b5ef107cdd0':
hevc: move splitting the packet into NALUs into a separate function
Conflicts:
libavcodec/hevc.c
libavcodec/hevc.h
libavcodec/hevc_parse.c
Merged-by: Michael Niedermayer <michael@niedermayer.cc>
* commit 'ae05b4865514fd71b5e9431e93aa0d03d7ba7751':
hevc: eliminate the second call to hls_nal_unit()
Conflicts:
libavcodec/hevc.c
Merged-by: Michael Niedermayer <michael@niedermayer.cc>
* commit 'd7bebe4805193783f0b6f292f9127a75709fb7d9':
hevc: skip invalid/ignored NALUs when splitting the packet
Merged-by: Michael Niedermayer <michael@niedermayer.cc>
* commit 'ab05ed4c322ed0488ac9b5d2ef5d4ffa55a946a7':
mpegvideo_parser: export pixel format and dimensions
Conflicts:
libavcodec/mpegvideo_parser.c
Merged-by: Michael Niedermayer <michael@niedermayer.cc>
* commit 'a9a2f3613040c4f90bf15cbd76f8671252ecc043':
doc: add a section about building with libmfx
Conflicts:
doc/general.texi
Merged-by: Michael Niedermayer <michael@niedermayer.cc>
* commit '86eee85daddb682fa072c2e2657c90a514b855e3':
bytestream2: set the reader to the end when reading more than available
Merged-by: Michael Niedermayer <michael@niedermayer.cc>
This also prevents an eventual compilation failure once request_channels
is removed.
Reviewed-by: Michael Niedermayer <michaelni@gmx.at>
Signed-off-by: James Almer <jamrial@gmail.com>
Also, make hls_nal_unit() work only on the provided NAL unit, without
requiring a whole decoding context.
This will allow splitting this code for reuse by the parser.
This prevents possible infinite loops with the calling code along the
lines of while (bytestream2_get_bytes_left()) { ... }, where the reader
does not advance.
CC: libav-stable@libav.org
It provides the following features:
* verify correctness by comparing output to the C version.
* detect failure to save and restore clobbered callee-saved registers.
* detect 32-bit parameters being used as if they were 64-bit in x86-64
(the upper halves are not guaranteed to be zero - but in practice
they very often are, which makes those bugs hard to spot otherwise).
* easy benchmarking.
Compile by running 'make checkasm'.
Execute by running 'tests/checkasm/checkasm'.
Optional arguments are '--bench' to run benchmarks for all functions,
'--bench=<pattern>' to run benchmarks for all functions that starts with
<pattern>, and '<integer>' to seed the PRNG for reproducible results.
Contains unit tests for most h264pred functions to get started, more tests
can be added afterwards using those as a reference.
Loosely based on code from x264. Currently only supports x86 and x86-64,
but additional architectures shouldn't be too much of an obstacle to add.
Note that functions with floating point parameters or floating point
return values are not supported. Some compiler-specific features or
preprocessor hacks would likely be required to add support for that.
Signed-off-by: Janne Grunau <janne-libav@jannau.net>
* commit '796268654c7807c9a1cfb322c838383e2b900d60':
asfdec: always reset packet state after seeking
Merged-by: Michael Niedermayer <michael@niedermayer.cc>
* commit 'c1d647b15afa69fa70f999a9ddcb98346409fb4d':
mp3: Make the seek more robust
Conflicts:
libavformat/mp3dec.c
Mostly not merged
See: b6267901c4 and various later commits
The bug is also not reproducable in FFmpeg
Merged-by: Michael Niedermayer <michael@niedermayer.cc>
This makes the output compatible with that of pretty much any other
tool that calculates PSNR.
Reviewed-by: Paul B Mahol <onemda@gmail.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
* commit '1410eeb6ea6bc5784e40032430afcdf54a79aedb':
imc: Use correct position for flcoeffs2 calculation
See: 75fd5ce4c1
Merged-by: Michael Niedermayer <michael@niedermayer.cc>
flcoeffs2[pos] should be the log2 of flcoeffs1[pos].
flcoeffs1[0] can be 0 here, thus flcoeffs2[pos] gets set to -inf,
causing problems further down.
This seems to have been copied from imc_decode_level_coefficients in
commit 4eb4bb3 without updating the position.
Reviewed-by: Michael Niedermayer <michaelni@gmx.at>
Signed-off-by: Andreas Cadhalpun <Andreas.Cadhalpun@googlemail.com>
flcoeffs2[pos] should be the log2 of flcoeffs1[pos].
flcoeffs1[0] can be 0 here, thus flcoeffs2[pos] gets set to -inf,
causing problems further down.
This seems to have been copied from imc_decode_level_coefficients in
commit 4eb4bb3 without updating the position.
Signed-off-by: Andreas Cadhalpun <Andreas.Cadhalpun@googlemail.com>
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
Fixes: asan_double-free_d34593_861_smp3.wmv
Found-by: Samuel Groß, Mateusz "j00ru" Jurczyk and Gynvael Coldwind
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
It asserts that the frame linesize is larger than 37, but it can be
smaller and decoding such frames works.
Before commit cc884a35 src_stride > 7*MB_SIZE was necessary, because the
blocks were interleaved in the tmp buffer and the last block was added
with an offset of 6*MB_SIZE.
It was changed for src_stride <= 7*MB_SIZE to write the blocks
sequentially, hence the larger tmp_step.
After that the assert was only necessary to make sure that the buffer
remained large enough.
Since commit bd2b6b33 s->scratchbuf is used as tmp buffer.
As part of commit 86e107a7 the minimal scratchbuf size was increased to
256*7*MB_SIZE, which is enough for any src_stride <= 7*MB_SIZE.
Also add a comment explaining the tmp_step calculation.
Signed-off-by: Andreas Cadhalpun <Andreas.Cadhalpun@googlemail.com>
Fixes: asan_heap-oob_394322e_138_cov_4265020547_CVPCMNL1_SVA_C.264
Found-by: Samuel Groß, Mateusz "j00ru" Jurczyk and Gynvael Coldwind
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
* commit '461b45efd04859b2672238bc8a6ecab9e9a14948':
lavc: Add nvenc.h to the skipheader
Conflicts:
libavcodec/Makefile
No change as there is no nvenc.h in FFmpeg
Merged-by: Michael Niedermayer <michaelni@gmx.at>
This ensures that no stale pointers leak through on any path
Fixes: signal_sigsegv_c3097a_991_xtrem_e2_m64q15_a32sxx.3gp
Found-by: Samuel Groß, Mateusz "j00ru" Jurczyk and Gynvael Coldwind
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Build system modified
There are several warnings occurring during build after this patch is
applied. The cause of most of these warnings is in that some definitions
needed here are logical part of sbr module and are added in later patches.
When this patches are applied these warnings stop occurring.
The only warning that is added here and is not fixed with later patches
is warning that warns that type mismatch for table ff_aac_eld_window_480.
The reason for this warning is in that ER AAC ELD 480 is not integrated in
to the fixed point implementation at this moment and there is no fixed point
version of this table.
Signed-off-by: Nedeljko Babic <nedeljko.babic@imgtec.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Add fixed point implementation of functions for generating tables
Signed-off-by: Nedeljko Babic <nedeljko.babic@imgtec.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* commit '84b223cc6d6ed4cc8bd295457a90f7c94a9dd784':
configure: Make the new qsv encoder depend on libmfx
Conflicts:
configure
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '40af330adf7fde8073271cf2b41ff9adc4c2bba9':
avconv: vda: Unlock the pixel buffer once it is accessed
See: c06fdacc3d
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '8fcd121b823caeadbe7597c9ae9229f6f164f949':
doc: Use the succinct syntax for the channelmap example
Conflicts:
doc/filters.texi
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '69ab9f53f901eac6a649e22d28cf093357870627':
hevc: split bitstream unescaping to a separate file
Conflicts:
libavcodec/Makefile
libavcodec/hevc.c
See: afa93d198a
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'fd124d8357b1becfde3ac8d5e3320127cf97a5b7':
hevc_ps: split the code for parsing the SPS and exporting it into the context
Conflicts:
libavcodec/hevc.c
libavcodec/hevc_ps.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '0e7c0ec344f542e68e3cc9680e8d41dffeffdb4e':
lavf/hevc: pad the RBSP buffer as required by the bistream reader
Merged-by: Michael Niedermayer <michaelni@gmx.at>
If init_get_bits fails the GetBitContext is invalid and must not be
used. Check the return value in dirac_header and propogate the error.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
For example, the encoder may return MFX_WRN_INCOMPATIBLE_VIDEO_PARAM warning
i.e. ret==5 old loop implementation will repeat several times until output buffer
overflow. New implementation explicitly uses loop only for device busy case.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* commit '02b7c630875c0bc63cee5ec597aa33baf9bf4e20':
h261: Signal freeze picture release for intra frames
Conflicts:
tests/ref/vsynth/vsynth1-h261
tests/ref/vsynth/vsynth2-h261
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Improves the accuracy of measurements, especially in short sections.
To quote the Intel 64 and IA-32 Architectures Software Developer's Manual:
"The RDTSC instruction is not a serializing instruction. It does not necessarily
wait until all previous instructions have been executed before reading the counter.
Similarly, subsequent instructions may begin execution before the read operation
is performed. If software requires RDTSC to be executed only after all previous
instructions have completed locally, it can either use RDTSCP (if the processor
supports that instruction) or execute the sequence LFENCE;RDTSC."
SSE2 is a requirement for lfence so only use it on SSE2-capable systems.
Prefer lfence;rdtsc over rdtscp since rdtscp is supported on fewer systems.
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
Avoid possible issues with memmapped hardware buffers in
case VDA is not doing a conversion on behalf of the user
and make the code more proper as working example.
CC: libav-stable@libav.org
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
Fixes out of array read
Fixes: asan_heap-oob_394322e_138_cov_4265020547_CVPCMNL1_SVA_C.264
Found-by: Samuel Groß, Mateusz "j00ru" Jurczyk and Gynvael Coldwind
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Otherwise a frame with non-zero nb_samples but without any data can be
returned.
Reviewed-by: Michael Niedermayer <michaelni@gmx.at>
Signed-off-by: Andreas Cadhalpun <Andreas.Cadhalpun@googlemail.com>
Since the new PNS implementation has been merged and is no longer considered
proof of concept (as it's much more complex and better than the previous), change
the comments to reflect that. We need people testing it (since all AAC profiles
require it to be on by default) and having it tagged as proof of concept might drive some away.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
When compiling libavutil/internal.h as C++11, clang warns that a space
is required between a string literal and an identifier. Put spaces
in concatenations of string literals and EXTERN_PREFIX.
Signed-off-by: Chris Watkins <watk@chromium.org>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Freeze picture release should be set to 1 when we're responding to a
fast update request. For simplicity we set it for all intra frames,
including those that starts a GOP.
Fixes issue where Tandberg MXP1700 does not recover from packet loss
state since it's waiting for the freeze picture relase indication.
Bug-Id: 873
CC: libav-stable@libav.org
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
Ref H.261 recommendation section 4.2.1.3, setting the still image flag
to 1 disables still image mode. Some decoders require this in order to
decode the bitstream as normal video.
Fixes H.261 calls to Cisco E20.
Also, reserved (aka spare) bits should be set to 1 unless specified
otherwise.
Bug-Id: 872
CC: libav-stable@libav.org
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
This patch adds MSA (MIPS-SIMD-Arch) optimizations for idctdsp functions in new file idctdsp_msa.c and simple_idct_msa.c
Signed-off-by: Shivraj Patil <shivraj.patil@imgtec.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Loongson has disabled all mipsfpu optimization as fate-test faild.
Signed-off-by: ZhouXiaoyong <zhouxiaoyong@loongson.cn>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
This patch adds MSA (MIPS-SIMD-Arch) optimizations for me_cmp functions in new file me_cmp_msa.c
Signed-off-by: Shivraj Patil <shivraj.patil@imgtec.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
This patch adds MSA (MIPS-SIMD-Arch) optimizations for mpegvideoencdsp functions in new file mpegvideoencdsp_msa.c
Signed-off-by: Shivraj Patil <shivraj.patil@imgtec.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
This should ensure that each frame get its metadata from its proper packet
regardless of frame delays caused by reordering or threading.
Signed-off-by: Marton Balint <cus@passwd.hu>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
the later is not optimal when the buffer size is well known at allocation time
This avoids a memcpy()
Overall 2.5% speedup with a random 1920x1080 video
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
This commit implements intensity stereo coding support
to the native aac encoder. This is a way to increase the efficiency
of the encoder by zeroing the right channel's spectral coefficients
(in a channel pair) and rederiving them in the decoder using information
from the scalefactor indices of special band types. This commit
confomrs to the official ISO 13818-7 specifications, although due to
their ambiguity certain deviations have been taken to ensure maximum
sound quality. This commit has been extensively tested and has shown
to not result in audiable audio artifacts unless in extreme cases.
This commit also adds an option, aac_is, which has the value of
0 by default. Intensity Stereo is part of the scalable aac profile
and is thus non-default.
The way IS coding works is that it rederives the right channel's
spectral coefficients from the left channel via the scalefactor
index values left in the right channel. Since an entire band's
spectral coefficients do not need to be coded, the encoder's
efficiency jumps up and it unzeroes some high frequency values
which it previously did not have enough bits to encode. That way
less information is lost than the information lost by rederiving
the spectral coefficients with some error. This is why the
filesize of files encoded with IS do not decrease significantly.
Users wishing that IS coding should reduce filesize are expected
to reduce their encoding bitrates appropriately.
This is V2 of the commit. The old version did not mark ms_mask as
0 since M/S and IS coding are incompactible, which resulted in
distortions with M/S coding enabled. This version also improves
phase detection by measuring it for every spectral coefficient in
the band and using a simple majority rule to determine whether the
coefficients are in or out of phase. Also, the energy values per
spectral coefficient were changed as to reflect the
official specifications.
Reviewed-by: Claudio Freire <klaussfreire@gmail.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
This commit adds support for the coding of intensity stereo spectral
coefficients. It also fixes the Mid/Side coding of band_types higher
than RESERVED_BT (M/S must not be applied to their spectral coefficients,
but marking M/S as present in encode_ms_info() is okay). Much
of the changes here were taken from the decoder and inverted.
This commit does not change the functionality of the decoder as the
previous patch in this series zeroes ms_mask and is_mask.
Reviewed-by: Claudio Freire <klaussfreire@gmail.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
This commit finalizes the PNS implementation previously added to the encoder
by moving it to a seperate function search_for_pns() and thus making it
coder-generic. This new implementation makes use of the spread field of
the psy bands and the lambda quality feedback paremeter. The spread of the
spectrum in a band prevents PNS from being used excessively and thus preserve
more phase information in high frequencies. The lambda parameter allows
the number of PNS-marked bands to vary based on the lambda parameter and the
amount of bits available, making better choices on which bands are to be marked
as noise. Comparisons with the previous PNS implementation can be found
here: https://trac.ffmpeg.org/attachment/wiki/Encode/AAC/
This is V2 of the patch, the changes from the previous version being that this
version uses the new band->spread metric from aacpsy and normalizes the
energy using the group size. These changes were suggested by Claudio Freire
on the mailing list. Another change is the use of lambda to alter the
frequency threshold. This change makes the actual threshold frequencies
vary between +-2Khz of what's specified, depending on frame encoding performance.
Reviewed-by: Claudio Freire <klaussfreire@gmail.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
This commit undoes commit c5d4f87e81
and removes PNS band marking from the twoloop coder, which has
been reimplemented in a better way in this series of patches.
Reviewed-by: Claudio Freire <klaussfreire@gmail.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
This commit enables the function added with commit 7c10b87 and uses that
new function for setting any special scalefactor indices. This commit does
not change the behaviour of the encoder since no bands are being marked as
either NOISE_BT(due to the previous PNS implementation removed in the
previous commit) or INTENSITY_BT2/INTENSITY_BT.
Reviewed-by: Claudio Freire <klaussfreire@gmail.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Newer versions of the nvenc hardware support The High 444 Predictive profile
of H.264, and can also do lossless encoding under this profile if desired.
This change introduces support for the profile, and exposes the appropriate
presets for requesting lossless encoding.
I tested lossless by generating a baseline sample with testsrc converted
to raw yuv444p, then encoded the sample with nvenc, then did a framemd5
comparision of both the raw video and the nvenc encode. The framemd5
reports were identical.
Signed-off-by: Philip Langdale <philipl@overt.org>
Signed-off-by: Timo Rothenpieler <timo@rothenpieler.org>
This change fixes a bug where a test that required a sample was being included
in the suite when SAMPLES was not set. It also improves the consistency of
variable names relating to the API tests.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'f046c3b5ac36848cce824b008e0347c621523041':
lavc: Move deprecation warning disabling to files including the table
lavc: Disable deprectation warnings coming from options table
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '832129431fd5c693b12c32a1563944c631feaf36':
lavu: Add version information for av_version_info()
Conflicts:
doc/APIchanges
libavutil/version.h
Merged-by: Michael Niedermayer <michaelni@gmx.at>
This commit resets any bands marked as M/S or IS upon encoding a frame.
This is needed because the arrays may contain some residual information
upon allocation on startup and because there isn't any mechanism to
reset the arrays once the frame has been encoded.
Reviewed-by: Claudio Freire <klaussfreire@gmail.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
There were some mistakes in the code for M/S stereo, this commit fixes them.
The start variable was not being reset for every window and every access to
the coefficients was incorrect as well. This fixes that by properly
addressing the coefficients using both windows and setting the start on every window to zero.
Reviewed-by: Claudio Freire <klaussfreire@gmail.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
This commit modifies 02dbed6 to use band->active_lines to better gauge how much information is contained within a single band and thus allow the perceptual noise subsitution to more accurately determine which bands to code as noise. The spread[w+g] used before this patch behaved more like a low-pass filter for PNS band_types, which could mistakingly mark some low frequency bands as noise.
Reviewed-by: Claudio Freire <klaussfreire@gmail.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* commit '80f955c90867561dcce769216bc497e13281eb38':
vda: Check the correct pointer for buffer allocation
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '76d4c62734fbb8a9f497712812f30ff5c27e787f':
webp: Make sure enough bytes are available
Conflicts:
libavcodec/webp.c
See: 0762152f7a
Merged-by: Michael Niedermayer <michaelni@gmx.at>
The loop always needs at least 8 bytes for chunk_type and chunk_size.
If fewer are left, bytestream2_get_le32 just returns 0 without
reading any bytes, leading to an infinite loop.
Signed-off-by: Andreas Cadhalpun <Andreas.Cadhalpun@googlemail.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* commit '016cac75c6061a1c03f812ddf258b8baefe70b00':
asfdec: prevent the infinite loop in detect unknown_subobject
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '9752d2e6cc9b9e8070ec515db8ed8374683d0856':
asfdec: prevent possible memory leak in the asf_read_metadata_obj
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '1316df7aa98c4784f190d107206d0bb12c590b89':
lavu: add an API function to return the Libav version string
Conflicts:
.gitignore
Makefile
cmdutils.c
doc/APIchanges
libavutil/avutil.h
libavutil/utils.c
See: f91126643a
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Every chunk needs at least 8 bytes for chunk_type and chunk_size.
Prevent a possible infinite loop.
CC: libav-stable@libav.org
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
They are used by dnxhd and mpegvideo_enc exclusively, move them to codec
private options instead.
Signed-off-by: Vittorio Giovara <vittorio.giovara@gmail.com>
This returns something like "v12_dev0-1332-g333a27c". This is much more
useful than the individual library versions, of which there are too
many, and which are very hard to map back to releases or git commits.
Signed-off-by: Janne Grunau <janne-libav@jannau.net>
More than 32 bits can't be stored in an integer and get_bits should not
be used with more than 25 bits.
Reviewed-by: Paul B Mahol <onemda@gmail.com>
Signed-off-by: Andreas Cadhalpun <Andreas.Cadhalpun@googlemail.com>
Now ff_qsv_init_internal_session() is able
to find appropriate display handle under linux using VAAPI.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
This avoids empty streams from being selected if a equivalent non empty one is available
The new system is also clearer and more systematic
This may need finetuning, which should be easy to do ...
Fixes Ticket2687
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
This also simplifies the code
Fixes: signal_sigabrt_7ffff6ac8cc9_2943_cov_3588637614_mss2_speech.wmv
Found-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'f91fe24e9bd6912c29bbb03d8afe878e045f9721':
g2meet: force simple idct for identical results over all fate configs
Conflicts:
tests/ref/fate/g2m3
tests/ref/fate/g2m4
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '9eec23b8a7fd0f91827bbc3ed0792c39a8cc9a8a':
g2meet: use av_ceil_log2 instead of a custom function
Merged-by: Michael Niedermayer <michaelni@gmx.at>
This patch adds MSA (MIPS-SIMD-Arch) optimizations for mpegvideo functions in new file mpegvideo_msa.c
Signed-off-by: Shivraj Patil <shivraj.patil@imgtec.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
This returns something like "N-73264-gb54ac84". This is much more useful
than the individual library versions, of which there are too much and
which are very hard to map back to releases or git commits.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'a1e2caa93e4f8102666a21222f01b74838b6497f':
mov: Log format rather than fourcc in stsd in trace mode
Conflicts:
libavformat/mov.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '2eef75fd7e1ac96ab9ca63bb4523078c908bc9b1':
mov: Adjust variable types to fix format warnings
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '3f872c9bfa8ee1032058cfa48068b5a73ef27b5e':
lavc: Add missing API guard to dtg_active_format option
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '4d1229dabf7a7e3b6a7b326afd79102256c3b008':
g2meet: Add FATE tests for all three G2M variants
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Fixes out of array access
Fixes: signal_sigsegv_3670fc0_2818_cov_2307326154_moon.mux
Found-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Fix warning from clang "absolute value function 'abs' given an argument
of type 'long long' but has parameter of type 'int' which may cause
truncation of value [-Wabsolute-value]".
ELS and ePIC decoder courtesy of Maxim Poliakovski,
cleanup and integration by Diego Biurrun.
Signed-off-by: Diego Biurrun <diego@biurrun.de>
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
If threading is used, the first (thread_count - 1) packets are read
before any frame/error is returned. Counting this as successful decoding
is wrong, because it also happens when no single frame could be decoded.
Reviewed-by: Michael Niedermayer <michaelni@gmx.at>
Signed-off-by: Andreas Cadhalpun <Andreas.Cadhalpun@googlemail.com>
* commit '271ce76d317c5432e151216cf23f12b77ed6cb7e':
h264: Parse registered data SEI message and AFD value
Conflicts:
libavcodec/h264.c
libavcodec/h264.h
libavcodec/h264_sei.c
libavcodec/version.h
See: d6e9566949
See: 22291c372f
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Most of the fate-dds-* and fate-txd-* tests already
output into the same pixel format regardless of
platform endianness, so there's no need to force
conversion to another format.
This fixes the tests fate-txd-16bpp, fate-txd-odd,
fate-dds-rgb16, fate-dds-rgb24 and fate-dds-xrgb on
big endian, where the tests seem to fail due to issues
with certain conversion codepaths in swscale.
Those conversion codepaths should of course be fixed, but
the individual decoder tests should use as little extra
conversion steps as possible.
Signed-off-by: Martin Storsjö <martin@martin.st>
* commit 'e95c7a61852cc5b9ce5445ff034b87553e61958a':
mov: Preserve the metadata even when bit-exactness is requested
Conflicts:
libavformat/movenc.c
tests/ref/vsynth/vsynth1-mpeg4
tests/ref/vsynth/vsynth2-mpeg4
See: a17ee4117d
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '3e3056f2a020dd77efdf379dbd4c06a65b4a499a':
h264: Allow stream and container cropping at the same time
Conflicts:
libavcodec/h264_slice.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
The container cropping is applied only when difference is within 16
pixels, and the smallest value between the two is chosen.
Bug-Id: 383
Signed-off-by: Vittorio Giovara <vittorio.giovara@gmail.com>
* commit '3ad678a85b96fc5fecd60e3d3a31ca5ffc89d67f':
fate: Update ac3 test to the new request_channel_layout option
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Fixes out of array access
Fixes: asan_heap-oob_4d5bb0_682_cov_3124593265_Fraunhofer__a_driving_force_in_innovation__small.mp4
Found-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Fixes out of array access
Fixes: asan_heap-oob_7f875d_3482_cov_1818465256_ssudec.mov
Found-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
the max value of the lookup in expanded form is:
(((1 << 7) - 1) << 1) - 65 + 1 + 64 = 254
add one entry of padding to inv_map_table[] to prevent out of bounds
access with non-conforming / fuzzed bitstreams
Signed-off-by: James Zern <jzern@google.com>
Reviewed-by: "Ronald S. Bultje" <rsbultje@gmail.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* commit '1b4c468477f3b8d372da8ef4e5405539ad9c1501':
riff: Validate the wav header size before trying to parse it
Conflicts:
libavformat/riffdec.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Fixes inconsistency and out of array access
Fixes: asan_heap-oob_17301a3_2100_cov_3226131691_ff_add_pixels_clamped_mmx.m2ts
Found-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Fixes out of array access
Fixes: asan_heap-oob_1dd60fd_267_cov_2954683513_5baad44ca4702949724234e35c5bb341.jpg
Found-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Previously these chunks where parsed again for each frame with threads
but not without leading to a different path and the potential for
inconsistencies
This also removes a related special case from decode_ihdr_chunk()
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Multiple IHDR chunks are forbidden in PNG
Fixes inconsistency and out of array accesses
Fixes: asan_heap-oob_4d5c5a_1738_cov_2638287726_c-m2-8f2b481b7fd9bd745e620b7c01a18df2.png
Found-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* cehoyos/master:
lavf/msnwc: Return 0 if the probe function does not detect msnwc-tcp.
lavf/mpegts: Return 0 if the probe function does not detect mpegts.
lavf/img2dec: Improve detection of valid Quickdraw images.
lavf/asfdec: Reduce minimum header size.
Changelog: Add jpeg 2000 improvements before they get forgotten.
lavf/img2dec: Autodetect dds frames.
Conflicts:
libavformat/version.h
Merged-by: Michael Niedermayer <michaelni@gmx.at>
This commit adds support for the coding of intensity stereo scalefactor indices.
It does not do any marking of such bands and as such does no functional changes
to the encoder. It removes any old twoloop specific code for PNS and moves it
into a seperate function which handles setting of scalefactor indices for
PNS and IS bands.
Reviewed-by: Claudio Freire <klaussfreire@gmail.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
This was suggested in the discussion about these functions
With this change the functions are available internally but are not
part of the public API
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
This patch adds MSA (MIPS-SIMD-Arch) optimizations for pixblock functions in new file pixblockdsp_msa.c
Adds new generic macros (needed for this patch) in libavutil/mips/generic_macros_msa.h
Signed-off-by: Shivraj Patil <shivraj.patil@imgtec.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
This commit adds support for both PNS and IS (intensity stereo) codebooks to the
encode_window_bands_info() quantizer, used by the faast, faac and anmr non-default,
native coders. This does not mean that both extensions now work with those coders,
some are simply unsuited and will trigger an assertion in the encoder while
others simply ignore the changed scalefactor indices and band types.
This commit simply adds support for encoding said band types with the alternative
coders. Future commits to the coders will be required to make them suitable.
Reviewed-by: Claudio Freire <klaussfreire@gmail.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
This commit extends the trellis quantizer (used by the default twoloop coder)
to accept and correctly encode codebooks needed for intensity stereo and perceptual noise substitution.
Reviewed-by: Claudio Freire <klaussfreire@gmail.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
This commit adds the energy spread to the struct for each band and removes 2 unused fields.
distortion and perceptual_weight were not referenced in any file nor were they set to any value,
so it was safe to remove them. The energy spread is currently only used in the aac psy model.
It's defined as being proportional to the tonality of each band.
Reviewed-by: Claudio Freire <klaussfreire@gmail.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'b08569a23948db107e5e6175cd4c695427d5339d':
lavf: Replace the ASF demuxer
Conflicts:
Changelog
libavformat/asf.h
libavformat/asfdec.c
libavformat/version.h
tests/ref/fate/wmv8-drm-nodec
tests/ref/seek/lavf-asf
The rewritten demuxer is placed in a new file, the current demuxer is
left as default. Carl has tested both and the one working better is
default.
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '441e8ae5efd681055e5af6f4317fb60110de9dd0':
FATE: drop the last truncated frame from the wmapro tests
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'd3ea79e8a65ddad4da11813bb43c46701295f68c':
FATE: drop the last truncated frame from the wma lossless test
Conflicts:
tests/fate/lossless-audio.mak
Merged-by: Michael Niedermayer <michaelni@gmx.at>
The old one is the result of the reverse engineering and guesswork.
The new one has been written following the now-available specification.
This work is part of Outreach Program for Women Summer 2014 activities
for the Libav project.
The fate references had to be changed because the old demuxer truncates
the last frame in some cases, the new one handles it properly.
The seek-test reference is changed because seeking works differently
in the new demuxer. When seeking, the packet is not read from the stream
directly, but it is rather constructed by the demuxer. That is why
position is -1 now in the reference.
Signed-off-by: Anton Khirnov <anton@khirnov.net>
This commit adds additional fields which are used by the native encoder to add intensity stereo support. It also adds some clarifying statements to the comments for the codebooks.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* commit '5ec0bdf2c524224f30ba4786f47324970aed4aaa':
h264: do not update the context fields copied between threads after finish_setup()
Conflicts:
libavcodec/h264.h
libavcodec/h264_slice.c
See: f111831ed6 and others
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '6d4d3fee63c46d921c4870feab79269af94e84e1':
h264: make sure the current picture is not made a long ref multiple times
See: 34ea5f418e
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '9a5e4fbec870c7d466b7a0aec92c70778efc96b5':
avconv: do not stop processing the input packet on decoding error
Conflicts:
ffmpeg.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'b114f6d48a06a4dad6882bc83e07463905f004c4':
avconv: factor out flushing the filters
Conflicts:
ffmpeg.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Otherwise sm_size can be larger than size, which results in a negative
packet size.
Reviewed-by: Michael Niedermayer <michaelni@gmx.at>
Signed-off-by: Andreas Cadhalpun <Andreas.Cadhalpun@googlemail.com>
* commit 'e49e0f58e273237f83b4486f3536931ed1943d18':
h264: make sure the slices do not overlap during slice threading
Conflicts:
libavcodec/h264.h
libavcodec/h264_slice.c
See: 43b434210e
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Any other x265 symbol may not exported, e.g. if the build is a
multilib (10-bit and 8-bit in one) build.
This is the only symbol we directly call, and is available in the
build number we check for.
Fixes the configure check on multilib x265 builds.
Signed-off-by: Derek Buitenhuis <derek.buitenhuis@gmail.com>
Any other x265 symbol may not exported, e.g. if the build is a
multilib (10-bit and 8-bit in one) build.
This is the only symbol we directly call, and is available in the
build number we check for.
Fixes the configure check on multilib x265 builds.
Signed-off-by: Derek Buitenhuis <derek.buitenhuis@gmail.com>
This HWAccel isn't really usable right now due to an nvidia driver bug,
so we don't want it selected by default.
HWAccels have a capabilities field and there's a comment about flags,
but no flags exist today, so let's add one for experimental hwaccels.
The intention of this change is to allow separation of API tests from the
existing tests, and also to have a place for the API test source/executable
files so they're not mixed in with the actual library code.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* commit '92fdc80cab2acad9f171ba38a08aa89b392bdadd':
nvenc: Fix NV12 input
Conflicts:
libavcodec/nvenc.c
Not merged, the changed code is not in FFmpeg
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '072756cdd2f949462520041e357f52f15d8c274d':
vc1dec: use get_bits_long and limit the read bits to 32
See: 1f1e0a2971
Merged-by: Michael Niedermayer <michaelni@gmx.at>
If nb_samples is zero, the bit_rate calculation results in a division by
zero.
Since ff_get_buffer fails if frame->nb_samples is zero, this can be
fixed by moving the bit_rate calculation after that function call.
That also makes it possible to reuse the already calculated
frame->nb_samples value.
Reviewed-by: Michael Niedermayer <michaelni@gmx.at>
Signed-off-by: Andreas Cadhalpun <Andreas.Cadhalpun@googlemail.com>
This fixes a segfault when decoding multi-channel MP3onMP4 files.
This is similar to commit cb72230d for MPADSPContext.
Reviewed-by: Michael Niedermayer <michaelni@gmx.at>
Signed-off-by: Andreas Cadhalpun <Andreas.Cadhalpun@googlemail.com>
Thats what the spec says should be done
aka iterate in the wrong space and use special cases to patch that up.
It sometimes can result in different order
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
This change introduces basic support for HEVC decoding through vdpau.
Right now, there are problems with the nvidia driver/library implementation
that mean that frames are incorrectly laid out in memory when they are
returned from the decoder, and it is normally impossible to recover the
complete decoded frame due to loss of data from alignment inconsistencies.
I obviously hope that nvidia will be fixing it in due course - I've verified
the problems exist with their example application.
As such, this support is not useful for any real world application, but I
believe that it is correct (with the caveat that the mangled frames may hide
problems) and will work properly once the nvidia problem is fixed.
Right now it appears that any file encoded by x265 or nvenc is decoded
correctly, but that's because these files don't use a bunch of HEVC
features.
Quick summary:
Features that seem to work:
1) Short Term References
2) Scaling Lists
3) Tiling
Features with known problems:
1) Long Term References
It's hard to tell what's going on here. After I read the nvidia example
app that does not set the IsLongTerm flag on LTRs, and changed my code,
a bunch of frames using LTR started to display correctly, but there
are still samples with glitches that are related to LTRs.
In terms of real world files, both x265 and nvenc only use short term
refs from this list. The divx encoder seems similar.
Signed-off-by: Philip Langdale <philipl@overt.org>
This also reduces the amount of memory needed
Fixes Ticket4672
The new code seems slightly faster as well, probably due to better cache usage
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Cross-compile toolchains without support for ranlib -D would fail.
This fixes the configure script to test the cross ranlib rather than the native ranlib.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Electronic Arts VP6 files may contain two video streams: one for the
primary video stream and another for the alpha mask. The file format
uses identical data structures for both streams.
Signed-off-by: Peter Ross <pross@xvid.org>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Result differs in pkt_duration and time_base.den for some reason.
Right now it tests only one example (adjusted to match the output).
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Drop unneeded var and avoid checking for NULL twice as
ffurl_closep() already does this.
Signed-off-by: Reynaldo H. Verdejo Pinochet <reynaldo@osg.samsung.com>
* commit '5dbd491eb38efab1d1313d4129ed76ab2e98176d':
TextureDSP: fix erroneous condition which produced blocky output for DXT
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Like the 5/3 case this is needed to avoid overflows and similarly for 16bpp
output pure 32bit operations are insufficient if high quality is wanted
Note, this code-path is only used in bitexact mode, so this should not
affect the speed of any real use-case
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'a88e21f5b78ef5e75b073ecbfd4e92921002a703':
Fix missing symbols when libvpx has only vp8 enabled
Not merged, the FFmpeg libvpx-vp8 encoder does not use anything from libvpx.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
The code is simply broken, the read packets are not aligned to
the mp3 frames, the file end or the id3 tag thus this simply
cannot reliably find the ID3v1 tag to remove it
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Ideally this should be discarded by the demuxer but this is not
possible without fully parsing which would be then very similar
to this. The current ID3v1 discard code in the demuxer does not work
and will be removed in a subsequent commit
The discard code could be adjusted if needed to also discard tags at
other locations than the end or to limit this possibly to input
from the mp3 demuxer or even to move the discarding to the
decoder.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Use new H264Ref.reference field to track field picture flags. The
H264Picture.reference flag in DPB is now irrelevant here.
This is a regression from git commit d8151a7, and that affected
multiple interlaced video streams.
Signed-off-by: Gwenole Beauchesne <gwenole.beauchesne@intel.com>
The pixel buffer base address is never unlocked this causes
a bug with some pixel format types that are produced natively
by the hardware decoder: the first buffer was always used.
Unlock the pixel buffer base address fixes the issue.
This should avoid problems on systems with little stack space and fix some crashes
in fate
crash found-by: jamrial
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'c0b105756f61d253bdabcc2bb49453a2557e7c3b':
txd: Use the TextureDSP module for decoding
Conflicts:
configure
libavcodec/s3tc.c
libavcodec/s3tc.h
libavcodec/txd.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
This patch adds MSA (MIPS-SIMD-Arch) optimizations for block functions in new file blockdsp_msa.c
Signed-off-by: Shivraj Patil <shivraj.patil@imgtec.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Using the internal DXTC routines brings support for non multiple of 4
textures. A new test is added to cover this feature. Hashes differ
since the decoding algorithm is different, though no visual changes
have been spotted.
Signed-off-by: Vittorio Giovara <vittorio.giovara@gmail.com>
This module implements generic texture decompression from different
families (DXTC, RGTC, BCn) and texture compression DXTC 1, 3, and 5.
Signed-off-by: Vittorio Giovara <vittorio.giovara@gmail.com>
This reduces the number of operations
Its not done for 9/7i as that would overflow thanks to JPEG2000 allowing
32 decomposition levels
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
thats how the specification defines it, this also improves numerical
accuracy of the integer wavelet implementation. It otherwise should
be equivalent, in case of overflows this can be reverted.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* commit '8655c54160767de1a6b96f8bc310d6e4eaceff48':
libvpx: Support the vp9 extended profiles
Conflicts:
Changelog
configure
libavcodec/libvpx.c
libavcodec/libvpx.h
libavcodec/libvpxdec.c
libavcodec/libvpxenc.c
libavcodec/version.h
mostly not merged, as requested by jamrial
See: 01e59d48ed
See: 079b7f6eac and others
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '05bf3f54e6078716f6267df530bf1d474ca3d606':
libvpx: Do not set vp8 only parameters when encoding in vp9
Conflicts:
libavcodec/libvpxenc.c
See: 238ec505e2
See: ae330070ee
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'c060d046aa2f89c0e601a2dcfbce53f0e36cf498':
af_resample: Set the number of samples in the last frame
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '6ec688e1bc76dd93151cbca1c340162ae4b10d77':
mp3: enable packed main_data decoding in MP4
Conflicts:
libavcodec/mpegaudiodec_template.c
Only the parts needed to support the available sample are merged
the remaining error checks are left in place
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Even if the jpeg2000 spec uses a wrong value this does not
make mathematics work this way, also this has been corrected in the 2004
version AFAIK
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
or if no rematrix and no resampling is performed and the input is 16bit
note reampling and rematrix itself always use more than 16bit internally
the "internal" sampling format is the format between these steps
Its unlikely the difference from this commit is audible in any case
unless there is some bug either before or after the change.
but multiple people prefer this and it slightly improves the precission
of computations.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Bump the minimum libvpx version to 1.3.0 and rework the configure logic
to fail only if no decoders and encoders are found.
Based on the original patch from Vittorio.
Signed-off-by: Vittorio Giovara <vittorio.giovara@gmail.com>
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
This is almost certainly closer to how the actual Nintendo players work,
and fixes some output pops in files with blank ADPC/SEEK tables (like
those from brawlcustommusic).
the vp9 bitstream supports 8 values:
unknown (default), bt601, bt709, smpte170, smpte240, bt2020, reserved
and sRGB.
Reviewed-by: Ronald S. Bultje <rsbultje@gmail.com>
Signed-off-by: James Zern <jzern@google.com>
The condition is impossible now.
the TPsot type is changed to unsigned int to prevent gcc from producing warnings
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
14496-3 suggests packing main_data of MP3 that is usually scattered
into multiple frames due to bit reservoir.
However, after packing main_data into a access unit, bitrate index
in the MPEG audio frame header doesn't match with actual frame size.
In order to accept this, this patch removes unnecessary frame size
checking on mp3 decoder.
Also, mov demuxer was changed to use MP3 parser only on special cases
(QT MOV with specific sample description) to avoid re-packetizing.
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
This patch adds MSA (MIPS-SIMD-Arch) optimizations for hpel functions in new file hpeldsp_msa.c
Adds new generic macros (needed for this patch) in libavutil/mips/generic_macros_msa.h
Signed-off-by: Shivraj Patil <shivraj.patil@imgtec.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
QP_store is only 8-bit-aligned, so accessing it as uint32_t causes
SIGBUS crashes on sparc.
The AV_RN32/AV_WN32 macros only do unaligned access in the
HAVE_FAST_UNALIGNED case.
Reviewed-by: Michael Niedermayer <michaelni@gmx.at>
Signed-off-by: Andreas Cadhalpun <Andreas.Cadhalpun@googlemail.com>
The APIC description must be unique, and some ID3v2 tag writers add
spaces to write several APIC entries with the same description. The
trailing spaces simply serve as a way to disambiguate the description.
Do this so that API users do not have to special-case mp3 to fix this
cosmetic issue.
Requested-by: wm4
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
This patch adds MSA (MIPS-SIMD-Arch) optimizations for qpel functions in new file qpeldsp_msa.c
Adds new generic macros (needed for this patch) in libavutil/mips/generic_macros_msa.h
Signed-off-by: Shivraj Patil <shivraj.patil@imgtec.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
This is needed to separate the end padding from the bitstream, allowing
to end it multiple times without disturbing it.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
WebPMemoryWriterClear() must be used instead of free() when
libwebp ABI version is > 0x0203.
Signed-off-by: James Almer <jamrial@gmail.com>
Signed-off-by: Vittorio Giovara <vittorio.giovara@gmail.com>
This patch adds MSA (MIPS-SIMD-Arch) optimizations for H263 lpf functions in new file h263dsp_msa.c
Signed-off-by: Shivraj Patil <shivraj.patil@imgtec.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Calling ffio_ensure_seekback() if ffio_init_checksum() has been called
on the same context can lead to out of bounds memory accesses and
crashes. The reason is that ffio_ensure_seekback() does not update
checksum_ptr after reallocating the buffer, resulting in a dangling
pointer.
This effectively fixes potential crashes when opening mp3 files.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
We are missing the handling of some special cases for this.
These cases should be unused and there should be no reason
to ever use them unless some spec dictates their use
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
The current check is too strict for newer makeinfo versions.
Existing version strings are:
makeinfo (GNU texinfo) 4.13
makeinfo (GNU texinfo) 5.2
texi2any (GNU texinfo) 5.9.93
Probably version 6 will come in the not too far future.
Reviewed-by: Timothy Gu <timothygu99@gmail.com>
Signed-off-by: Andreas Cadhalpun <Andreas.Cadhalpun@googlemail.com>
In the TTA extradata re-construction the values are written with
avio_wl16 and if they don't fit into uint16_t, this triggers an
av_assert2 in avio_w8.
Reviewed-by: Michael Niedermayer <michaelni@gmx.at>
Signed-off-by: Andreas Cadhalpun <Andreas.Cadhalpun@googlemail.com>
And default to 8000 if it is invalid.
An invalid sample rate can trigger av_assert2 in av_rescale_rnd.
Reviewed-by: Michael Niedermayer <michaelni@gmx.at>
Signed-off-by: Andreas Cadhalpun <Andreas.Cadhalpun@googlemail.com>
Fixes ticket #4628.
The problem arose, in the sample file at least, in the last block where the
minimum and maximum Rice partition orders were both 0. In that case, and any
other where pmax == pmin, the original UINT32_MAX placeholder value for
bits[opt_porder] was getting overwritten before the comparison to check if the
current partition order is a new optimal, so the correct partition order and
RiceContext params were not being set.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Added HLS encryption with -hls_key_info_file <key_info_file> option. The
first line of key_info_file specifies the key URI written to the
playlist. The key URL is used to access the encryption key during
playback. The second line specifies the path to the key file used to
obtain the key during the encryption process. The key file is read as a
single packed array of 16 octets in binary format. The optional third
line specifies the initialization vector (IV) as a hexadecimal string to
be used instead of the segment sequence number (default) for encryption.
Changes to key_info_file will result in segment encryption with the new
key/IV and an entry in the playlist for the new key URI/IV.
Key info file format:
<key URI>
<key file path>
<IV> (optional)
Example key URIs:
http://server/file.key
/path/to/file.key
file.key
Example key file paths:
file.key
/path/to/file.key
Example IV:
0123456789ABCDEF0123456789ABCDEF
Example:
ffmpeg -f lavfi -i testsrc -c:v h264 -hls_key_info_file file.keyinfo
foo.m3u8
file.keyinfo:
http://server/file.key
/path/to/file.key
0123456789ABCDEF0123456789ABCDEF
Example shell script:
BASE_URL=${1:-'.'}
openssl rand 16 > file.key
echo $BASE_URL/file.key > file.keyinfo
echo file.key >> file.keyinfo
echo $(openssl rand -hex 16) >> file.keyinfo
ffmpeg -f lavfi -re -i testsrc -c:v h264 -hls_flags delete_segments \
-hls_key_info_file file.keyinfo out.m3u8
--
Signed-off-by: Christian Suloway <csuloway@globaleagleent.com>
Signed-off-by: Dan Dennedy <dan@dennedy.org>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'a4fbd55d6e03eabdbecc3b7892ec09eb8062d066':
h264: er: Copy from the previous reference only if compatible
See: fdc64a1044
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '9af7e8045e3e63ab39adedae9a7c11b1c410af26':
lavc: Clarify the behaviour of dimension and format context fields
Conflicts:
libavcodec/avcodec.h
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '03ca6d70df192125a772dadd01acfe3905aa653f':
x264: Factor out the reconfiguration code
Conflicts:
libavcodec/libx264.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
This is more robust.
And only check if there is actually a frame returned.
Reviewed-by: Michael Niedermayer <michaelni@gmx.at>
Signed-off-by: Andreas Cadhalpun <Andreas.Cadhalpun@googlemail.com>
Also use the frame pixel format instead of the one from the codec
context, which is more robust.
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
Reviewed-by: Michael Niedermayer <michaelni@gmx.at>
Signed-off-by: Andreas Cadhalpun <Andreas.Cadhalpun@googlemail.com>
Also use the frame pixel format instead of the one from the codec
context, which is more robust.
Signed-off-by: Andreas Cadhalpun <Andreas.Cadhalpun@googlemail.com>
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
The AVCodecContext width, height, coded_width, coded_height and format
are used mainly as decoding hints and they get internally overwritten
during the data parsing stage.
Do not assume they match the last AVFrame provided by
avcodec_decode_video2 and assimilated functions since multi-threading
and other frame reordering might make those values to refer to frames
that will be outputted in the future.
CC: libav-stable@libav.org
* commit '74ea1167d91ccb2e1f2943efa030f2c278b598be':
tls_gnutls: fix hang on disconnection
See: 2222f419da
Merged-by: Michael Niedermayer <michaelni@gmx.at>
GNUTLS_SHUT_RDWR means GnuTLS will keep waiting for the server's
termination reply. But since we don't shutdown the TCP connection at
this point yet, GnuTLS will just keep skipping actual data from the
server, which basically is perceived as hang.
Use GNUTLS_SHUT_WR instead, which doesn't have this problem.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
GNUTLS_SHUT_RDWR means GnuTLS will keep waiting for the server's
termination reply. But since we don't shutdown the TCP connection at
this point yet, GnuTLS will just keep skipping actual data from the
server, which basically is perceived as hang.
Use GNUTLS_SHUT_WR instead, which doesn't have this problem.
Signed-off-by: Martin Storsjö <martin@martin.st>
Neccessary -> Necessary
formated -> formatted
thee -> the
eventhough -> even though
seperately -> separately
Reviewed-by: Michael Niedermayer <michaelni@gmx.at>
Signed-off-by: Andreas Cadhalpun <Andreas.Cadhalpun@googlemail.com>
Today, we track the short term RPS size for DXVA, but only if the
SliceHeader RPS is being used. Otherwise it's left uninitialized.
NVIDIA's VDPAU implementation requires that the size be accurately
tracked even if an SPS RPS is being used. In this case, it's really
counting the size of the RPS idx information, but you end up with
mangled output if the value is not accurate.
VDPAU also needs the size of the long term RPS.
Signed-off-by: Philip Langdale <philipl@overt.org>
Removes a defined but not used warning on files including softfloat.h
Reviewed-by: Michael Niedermayer <michaelni@gmx.at>
Signed-off-by: James Almer <jamrial@gmail.com>
Theres currently no case where this could be triggered
Found-by: Daemon404
Reviewed-by: Nicolas George <george@nsup.org>
Reviewed-by: Paul B Mahol <onemda@gmail.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
This reverts commit 04f0002, which made it impossible to enable VSX with
a generic cpu.
This changes the behavior back to what it was before commit b0af404.
Reviewed-by: Michael Niedermayer <michaelni@gmx.at>
Signed-off-by: Andreas Cadhalpun <Andreas.Cadhalpun@googlemail.com>
This patch adds MSA (MIPS-SIMD-Arch) optimizations for AVC qpel functions in new file h264qpel_msa.c
Adds new generic macros (needed for this patch) in libavutil/mips/generic_macros_msa.h
Added const to local static array.
Signed-off-by: Shivraj Patil <shivraj.patil@imgtec.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
This is what FFmpeg / FFplay do and it is more robust
Reviewed-by: Stefano Sabatini <stefasab@gmail.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
If we do check av_pix_fmt_desc_get() then we should fail and
not continue with an invalid pix_fmt
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'a7ac1a7b94447f33ae95be4d6d186e2775977f91':
flv: Name an enum and use its type
Conflicts:
libavformat/flvdec.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Inconsistencies between the dimensions/pixel format of avctx and the
frame can confuse API users.
For example this can crash the demuxing_decoding example.
Back up the previous values and restore them, when decoding the next
frame. This is necessary, because these can be different between the
returned frame and the last decoded frame.
Reviewed-by: Michael Niedermayer <michaelni@gmx.at>
Signed-off-by: Andreas Cadhalpun <Andreas.Cadhalpun@googlemail.com>
* commit 'e7af52a68dde9144b273a9598b60bf0f56e1323b':
mpegvideo: rv10: Move function declaration to a separate header
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'e3d0f49abb20a551bf6d885f75c354d6d0bbeb9d':
mpegvideo: h263: Move all tables to a single file
Conflicts:
libavcodec/h263.h
libavcodec/h263data.h
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '8b5007a31b8d1ddbe3661bf45a732336450b7d25':
mpegvideo: Move ER functions to a separate file
Conflicts:
libavcodec/mpegvideo.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Some files have SeekHead elements with broken IDs. They mismatch with
the ID of the destination element. These files are written by
"IDMmkvlib0.1" (as identified by the MuxingApp and WritingApp elements),
and the SeekHead IDs are actually endian-swapped.
This confuses the SeekHead logic of the demuxer. It will read some
elements twice, because the SeekHead ID is used to identify and remember
already read elements. With the file at hand, the stream list was
duplicated by reading the Tracks element twice.
Fix this by rejecting invalid EBML IDs in SeekHead entries. (This fix is
relatively specific to the broken file at hand, and doesn't protect
against some other cases of broken SeekHead, such as valid but
mismatching target element IDs.)
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Fixes clang warning "absolute value function 'fabsf' given an argument
of type 'double' but has parameter of type 'float' which may cause
truncation of value [-Wabsolute-value]".
Having this macro in an header only facilitates the use of such header.
The code increase is minimal and files have one less dependency
on mpegvideo.h.
These 2 are highly related so they are in the same commit
Fixes part of Ticket4605
Fixes p0_04.j2k
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
This is implemented but i suspect does not work correctly as no file using this
seems to decode correctly.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
This works with one of 2 RLCP samples i have, the other appears to also
use selective arithemtic coding bypass which may or may not be the reason why it does
not work
Sample: p0_16.j2k
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
This patch adds MSA (MIPS-SIMD-Arch) optimizations for AVC idct functions in new file h264idct_msa.c
Adds new generic macros (needed for this patch) in libavutil/mips/generic_macros_msa.h
Signed-off-by: Shivraj Patil <shivraj.patil@imgtec.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
This patch adds MSA (MIPS-SIMD-Arch) optimizations for AVC intra prediction functions in new file h264pred_msa.c
Adds new generic macros (needed for this patch) in libavutil/mips/generic_macros_msa.h
Signed-off-by: Shivraj Patil <shivraj.patil@imgtec.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
There is no support for non integer sample rates, using doubles/floats currently could
only lead to rounding differences between platforms
Previous version Reviewed-by: Mark Harris <mark.hsj@gmail.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
s patch adds MSA (MIPS-SIMD-Arch) optimizations for AVC chroma mc functions in new file h264chroma_msa.c
Adds new generic macros (needed for this patch) in libavutil/mips/generic_macros_msa.h
Signed-off-by: Shivraj Patil <shivraj.patil@imgtec.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Make the logic in libavformat/hevc.c parse_rps align with libavcodec/hevc_ps.c ff_hevc_decode_short_term_rps
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
This is required for the (not yet in git) private stream detection/export,
no other testcase known
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'd1dd0d404c085f4fce7b8358b4aea677761c5d88':
mpegvideo: Move block permutation function where is used
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'c6aa0554b0c3e31fec4580b68ea85b66966cd381':
mpegvideo: Drop release_unused_pictures() function
Conflicts:
libavcodec/mpegvideo.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '7061bf0925a7d6c5899bbe710b2b8cdae9005274':
mpegvideo: Move Picture-related functions to a separate file
Conflicts:
libavcodec/mpegvideo.c
libavcodec/mpegvideo.h
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Send a footer to correctly close client sockets.
This fixes network errors in client applications.
Signed-off-by: Stephan Holljes <klaxa1337@googlemail.com>
Reviewed-by: Nicolas George <george@nsup.org>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
display_matrix_size is only initialized when av_stream_get_side_data()
returns a side data pointer. The code is safe since the only effect this
has is setting the display_matrix pointer to NULL which it was already
anyway.
This patch adds MSA (MIPS-SIMD-Arch) optimizations for HEVC intra predition functions in new file hevcpred_msa.c
Adds new generic macros (needed for this patch) in libavutil/mips/generic_macros_msa.h
Signed-off-by: Shivraj Patil <shivraj.patil@imgtec.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
This patch adds MSA (MIPS-SIMD-Arch) optimizations for HEVC loop filter and sao functions in new file hevc_lpf_sao_msa.c
Adds new generic macros (needed for this patch) in libavutil/mips/generic_macros_msa.h
In this patch, in comparision with previous patch, duplicated c functions are removed.
Signed-off-by: Shivraj Patil <shivraj.patil@imgtec.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
If chan2 is not smaller than the number of channels, it can cause
segmentation faults due to dereferencing a NULL pointer.
Signed-off-by: Andreas Cadhalpun <Andreas.Cadhalpun@googlemail.com>
Reviewed-by: Paul B Mahol <onemda@gmail.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
The AVFrame values are closer to the AVFrame bitmap changed instead of
the AVCodecContext values, so this should be more robust
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
snprintf(error,sizeof(error),"Error while opening encoder for output stream #%d:%d - maybe incorrect parameters such as bit_rate, rate, width or height",
Some files were not shown because too many files have changed in this diff
Show More
Reference in New Issue
Block a user
Blocking a user prevents them from interacting with repositories, such as opening or commenting on pull requests or issues. Learn more about blocking a user.
