In the prior code, the above context pointers used for entropy
decoding were initialized on the first frame, and not updated when
the frame size changed. The per-frame code which initializes the
contexts assumes that the contexts are contiguous, leading to an
incomplete initialization when the frame is smaller. This commit
updates the pointers so that the context is contigous whenever
the frame size changes.
Conflicts:
vp9/common/vp9_alloccommon.c
Change-Id: I08b53e3a30c8289491212311682ff1b8028cff6c
This is a short term optimization till we work out a decoder
implementation requiring no frame border extension.
Change-Id: I02d15bfde4d926b50a4e58b393d8c4062d1be70f
This is required because upon downscaling, if a motion vector points
partially into the UMV (e.g. all minus 1 of 64+7 pixels, i.e. 70),
then we can point up to 140 pixels into the larger-resolution (2x)
reference buffer UMV, which means the UMV for reference buffers in
downscaling needs to be 140 rounded up to the nearest multiple of 32,
i.e. 160.
Longer-term, we should probably handle the UMV differently by detecting
edge coverage on-the-fly and using a temporary buffer for edge extensions
instead of adding 160 pixels on all sides of the image (which means a
CIF image uses 3x its own area size for borders).
Change-Id: I5184443e6731cd6721fc6a5d430a53e7d91b4f7e
In the rare case were 4x4 interior filtering was called for but no
8x8 or larger filtering takes place, the previous code was skipping
the filtering. This patch fixes the issue by including the interior
mask in the overall mask for the filter application loops.
Change-Id: I4a0b65056c64f97478827c2ff41e0914fc7779d0
For cases where there's no transform set in bit 0 (the left edge of
the SB) but bit 0 of mask_4x4_int is set (the edge 4 pixels from the
left edge needs filtering), it was incorrectly being skipped before.
This situation only happens on the leftmost edge of the image, as
the edge at column 0 is intentionally skipped since there aren't
pixels to the left to read.
Change-Id: Ib2fbbcb40166e90af31b1a0e13b85b68c226cbd3
Change vp9_block_error() to return a 64bit error variable, change all
callers to expect a 64bit return value (this will prevent overflows,
which we basically don't check for at all right now). Remove duplicate
block_error() function, which fixed that through truncation. Remove
old (incompatible) mmx/sse2 block_error SIMD versions and replace with
a new one that returns a 64bit value.
Encoding time of first 50 frames of bus @ 1500kbps goes from 3min29 to
3min23, i.e. a 3% overall speedup.
Change-Id: Ib71ac5508b5ee8a80f1753cd85d72df1629abe68
Encoding of bus @ 1500kbps (first 50 frames) goes from 3min57 to
3min35, i.e. approximately a 10.5% speedup. Note that the SIMD versions
which use a bilinear filter (x_offset & 7 || y_offset & 7) aren't
perfectly interleaved, and can probably be improved further in the
future. I've marked this with a few TODOs/FIXMEs in the code.
Change-Id: I5c9e900c0f0d32e431a50fecae213b510b2549f9
This reverts commit 90a9900abb
Seems to break the Mac build:
src/include/gtest/internal/gtest-port.h:1208:: pthread_mutex_lock(&mutex_)failed with error 22
Abort trap: 6
Change-Id: Icbe31161d7c27f1b0a28d33409e7712430bbf0ae
Improves the rd modeling function and implements them using interpolation
from a table which is a little faster. Also uses sse as input to the
modeling function rather than var - since there is no dc prediction
used and as a result the sse works a little better.
derfraw300: +0.05%
Speedup: ~1%
Change-Id: I151353c6451e0e8fe3ae18ab9842f8f67e5151ff
This uses variance to split partition. Variance is calculated using
nearest mv, always from last ref frame.
Change-Id: Idd015b4a9aa3bc82591759eac239680c07496896
The new print out includes skips and has prefixed sections so you can
grep to find things like transforms chosen on each frame.
Change-Id: I195043424647d9514cfc3ff6720a5b20d010fa1b
currently threading is internal to libvpx so thread safety is unneeded
in libgtest -- visual studio builds already operate in this way as they
do not have pthread.h available by default.
this removes an unconditional link to libpthread using $(extralibs)
should libvpx require it.
Change-Id: Ieae1d693406653a54b54fba818c598836797d33b
Tests resolutions of 8, 10, 16, 18, 32, 34, 64, 66 to exercise the
border conditions, as well as non-SB aligned sizes.
Change-Id: Ie7c2b7860ac3727e23202042f2e86792652912f8
Optimized the quantization function by making it a two-pass
process. The first pass does a quick checking of the transform
coefficients against the base ZBIN, and only keep the good
enough set of coefficients for quantization. A skipping
check is added. If all coefficients are within the base ZBIN, no
quantization is needed. The second pass is the actual quantization
pass, which only processes the coefficient subset determined
in first pass. This reduces the computation. Furthermore, an
alternitive method is used for large transform size, which often
has sparse nonzero quantized coefficients.
Overall, the encoder speedup is about 4%. The quantization function
itself gets 20% faster.
Change-Id: I3a9dd0da6db030260b6d9c314a9fa48ecae89f22
This commit makes use of dual fdct32x32 versions for rate-distortion
optimization loop and encoding process, respectively. The one for
rd loop requires only 16 bits precision for intermediate steps.
The original fdct32x32 that allows higher intermediate precision (18
bits) was retained for the encoding process only.
This allows speed-up for fdct32x32 in the rd loop. No performance
loss observed.
Change-Id: I3237770e39a8f87ed17ae5513c87228533397cc3
This seems to only be used in the encoder. Also remove an empty wrapper
file that contained forward declarations for this function, but didn't
actually define any actual functions.
Change-Id: Ifc561eef7ebe374a7d03698055e51e105f6d614b
The error happened because of vp8_decrypt_cb typedef redefinition in both
treereader.h and vp8dx.h. Removing typedef from vp8dx.h in favor of raw
function pointer declaration.
Change-Id: I0266eb341ce433d40caf0abf8748694d505ee786
This allows code calling the library can choose an arbitrary
encryption algorithm.
Decoder control parameter VP8_SET_DECRYPT_KEY is renamed to
VP8D_SET_DECRYPTOR, and now takes an small config struct instead
of just a byte array.
Change-Id: I0462b3388d8d45057e4f79a6b6777fe713dc546e
quiets a warning on every file; the preference is to use a 64-bit
compiler, which is readily available at and above this version.
Change-Id: I56e7eb569022e7148249d93fe386ad5ea0eee3fc
vp9_default_inter_mode_probs was being accessed with a different type
than it was defined with. Ensure that its declaration is included
prior to its definition.
Change-Id: I2f963f513ab2f4e339f8a3c17e3d0f03749eba16
All elements of this table are equal to 252, so replace it with a
single constant VP9_COEF_UPDATE_PROB.
Change-Id: I1e2d1d284326ce6df9899a740c2fc344b3ec81c9
The encoding time for bus at CIF goes from 661s to 625s. This commit
also enabled unit test of sad8x4/4x8 in sad_test.cc.
Change-Id: If3d10ebb56bda584bdb69bcf056599d580b12cb1
Avoid calling decode_block, inverse transform/add in the block is
a skip block for SBs smaller than 8x8 and intra-coded SBs.
Change-Id: I1684182f4a0050c8d6bb46cba6830d9425e7127d
The encoding time for bus at CIF goes from 661s to 625s. This commit
also enabled unit test of sad8x4/4x8 in sad_test.cc.
Change-Id: If3d10ebb56bda584bdb69bcf056599d580b12cb1
These files can stand in until we get proper syntax vectors. They
should provide some additional assurance against inadvertant
bitstream changes.
Change-Id: I12f6c9a5f054e30df40a7ff1f33145abf7e1d59d
Modified to work with 8x8 blocks of memory. Will revisit
later for further optimizations. For the HD clip used, the
decoder improved by almost 20%.
Change-Id: Iaa4785be293a32a42e8db07141bd699f504b8c67
Allows vpxdec to operate multiple times on the same input. Mostly
useful for debugging/development.
Change-Id: Icf25ece22e387052eade4438971eee5ff4f798ba
Modified to work with 8x8 blocks of memory. Will revisit
later for further optimizations. For the HD clip used, the
decoder improved my 20%.
Change-Id: Ia0057f55d66d1445882351ea6c43b595a5a980e5
vpxdec stays in a loop when decoding vp9. This patch is a
quick fix to stop the loop when all data has been decoded.
Eventually we should move the vp9_get_raw_frame() call into
vp8_get_frame().
Change-Id: I3f97b6b4e1fe9ba69f746a29fc54c3304956f661
The encode-side scaling was not indexing through the image correctly
for the chroma planes, causing a green checkerboard-like output in
the unit test.
Change-Id: I9abbd73615404cd6699588be3e64dcf59005bc14
Previous code indexed using the tile length coded in the bitstream
without checking that the read would be valid.
Change-Id: Ia5047762223a4f80d75016dd546dc2ef18b6887d
Removes the case of coding prob = 0 for forward updates, since that
is not an allowed probability to code.
Slightly improves efficiency but may not matter in practice.
Change-Id: I3b4caf82e8f0891992f0706d4089cc5a27568dba
This commit fixed the allowable partition types for bottom-right
corner blocks.
When a block has over half of its pixels as valid content in both
vertical and horizontal directions, allow all the four partition
types in the bit-stream. Otherwise, apply partition type constraints.
Change-Id: I2252e2de7125a8bfb1c824bf34299a13c81102e3
* New probs for subpel filters/tx_count
* Makes a change to not reset to defaults for the tx_size
probs if an intermediate frame reverts to using a fixed tx_size.
* A few updates to the parameters for backward adaptation for mode/mv
* some cosmetic cleanups
derf300: +0.06%
Change-Id: I22994d659bc31ca7a4fc8820fde24001e64a2920
Remove the bilinear filter mode, and the no-loopfilter mode, and the
related vp9_setup_version() function.
Change-Id: I32311367812faf37863131df3af37d63d03973d7
This commit has no impact but to help us debug issues. To Use call like
this:
vp9_print_modes_and_motion_vectors(cpi->common.mi, cpi->common.mi_rows,
cpi->common.mi_cols,
cpi->common.current_video_frame,
"decode_mi.stt");
Change-Id: I89e27725dae351370eb7f311a20a145ed4f1d041
If the codec fails to return a frame on the second frame (as in a VP8 alt-ref,
then img will be a null pointer and dereferencing it while trying to write
the color format (again) will crash.
Change-Id: Ie48710d4c5715f532d453c879c71c20ccdeb81cc
No bitstream change.
Removes unused filters and the code for the case of 2 switchable filters;
also changes the 8tap-smooth filter coefficients for integer shifts to be
interpolating to be consistent with the way it is implemented currently.
Change-Id: I96c542fd8c06f4e0df507a645976f58e6de92aae
Implements ability to signal and decode frames that are
encoded using only intra coding modes. Only the decode
side has been implemented here.
Change-Id: I53ac6a8d90422cd08ba389e5236e15b45f9e93de
Change the argument of get_uv_tx_size() to be an MBMI pointer, so that the
correct column's MBMI can be passed to the function.
Change-Id: Ied6b8ec33b77cdd353119e8fd2d157811815fc98
Fixed point scaling factors are calculated once for each
reference frame by using integer division. Otherwise fixed point
scaling routines are used in all scaling calculations. This makes it
possible to calculate fixed point scaling factors on device driver
software and pass them to hardware and thus avoid division on hardware.
TODO:
- Missing check for maximum frame dimensions
(currently scaling uses 14 bits)
- Missing check for maximum scaling ratio
(upscaling 16:1, downscaling 2:1)
Problems:
- Straightforward fixed point implementation can cause error +-1
compared to integer division (i.e. in x_step_q4). Should only
be an issue for frames larger than 16k.
Change-Id: I3cf4dabd610a4dc18da3bdb31ae244ebaf5d579c
Was always using sb_type of first column in a row of 8x8 units when
determining decoded block edges as a subcondition for loop filter
skipping.
Change-Id: Ib17554633a63a90b70cdaa7bed65db035a8ad9d8
Reduces TX_SIZE contexts to 2 for each kind. The code is
cleaner and there is hardly any performance difference with
more than two contexts.
Results: almost neutral
Change-Id: I17656bd6db76224ae2856adf882504560e7dbaa4
For key frames everything is the same as before. For inter frames we try
to reference last/golden/altref frame size. If there is no match then the
actual size is encoded. Also we don't allow zero width and height anymore.
Change-Id: I49d791fd94af749c823579b0c5ef17c961372678
Made changes to the frame header to write the sync
code in the frame header for a non-displayable,
intra-only frame.
Extended reset_frame_context to 2-bits.
(Submitting on behalf of Dmitri)
Change-Id: Ie836ae0df9ed572fb4f08aabe9351a555c4f3b96
Adds coding of transform size within a frame by use of context
of transform sizes selected in left and above blocks.
Also incorporates code for generating stats.
TODO: generate and incorporate new default stats
Change-Id: I6a7af099f6ad61d448521d9a51167aedaf638ed6
Refactors mbskip coding to be compatible with coding of the rest of
the symbols. Adds forward/backward adaptation and removes a lot of
the legacy code.
Results:
fast50: +1.6%
derfraw300: +0.317%
Change-Id: I395a2976d15af044d3b8ded5acfa45f6f065f980
The partition types of blocks sitting on the frame boundary are
constrained by the block size and the position of each sub-block
relative to the frame. Hence we use truncated probability models
to handle the coding of such information.
100 frames run:
yt 0.138%
Change-Id: I85d9b45665c15280069c0234ea6f778af586d87d
This can only happen if partition is partly out-of-frame, in which
case the referenced mv is either out-of-frame also (and thus has the
same value as an already-read one), or it is actually uninitialized,
in which case we don't want to use it.
Change-Id: Icf39fa4d987c7abcbebb9bbdcdd6311e8fb9d3c9
Just an intermediate change set to simplify merges. Reordering several
uncompressed header bits, code restructuring + minor cleanups.
Change-Id: I28272f520762f8c4e3ad230ae39fff5102ba5c0d
With the removal of i4X4 and SPLIT_MV modes, the two entries for the
modes are no longer used. This patch remove the coding of the deltas.
Change-Id: Iea4eb500404ebe9706159380a03b8eca542fb4c3
Changes to the coding of transform sizes, along with forward
and backward probability updates.
Results:
derf300: +0.241%
Context based coding of transform sizes will be in a separate
patch.
Change-Id: I97241d60a926f014fee2de21fa4446ca56495756
Added condition to not to skip filtering of transform block edges when
the edge is also a decoding block edge.
Change-Id: Iaccb6206c4202b78e5dca3b89379556e0f4aba0c
Wrong max data size (skip has no data) and use of vp9_get_segdata()
when it should be vp9_segfeature_active().
Change-Id: I1eb97d33df6e2a42cc589049f704266fe3639902
In the longer term the encoder should allow compound as long
as one of the buffers has opposite sign bias and as per the decoder
this buffer is then set as the fixed reference. However at the moment
the encoder and RD loop only supports the case where the ALTREF_FRAME
buffer (or third of the 3 allowed in any given frame) is the odd one out.
This patch fixes a bug that would allow compound inter and set
fixed ref to ALTREF_FRAME when it is not the odd one out.
Change-Id: Ic83a69486e088a147ba83a4aedc2a0042f6b3721
Adds the ability to have the decoder show one of the existing reference
frames directly, without having to code it indirectly as a series of
skip blocks.
Change-Id: Ib6c26c5f6a8709863cf304ab890db8559687d25e
This gets rid of the warning
"C4146: unary minus applied to unsigned type, result still unsigned"
with visual c++.
Change-Id: I6eb24da983136d798221db4d3a5f50dc2857a03b
ref_frame in MB_Mode_Info was changed in the ref frame coding patch
to be an array to handle first and second reference frame, this patch
fix the loop filter code that use the pointer directly as reference
frame.
Change-Id: I71afa5a49deb50c1bc38029fd07470b984c6dfe9
Code intra/inter, then comp/single, then the ref frame selection.
Use contextualization for all steps. Don't code two past frames
in comp pred mode.
Change-Id: I4639a78cd5cccb283023265dbcc07898c3e7cf95
Split partition probabilities between keyframes and non-keyframes,
since they are fairly different. Also have per-blocksize interframe
y intramode probabilities, since these vary heavily between different
blocksizes.
Lastly, replace default probabilities for partitioning and intra modes
with new ones generated from current codec. Replace counts with actual
probabilities also.
Change-Id: I77ca996e25e4a28e03bdbc542f27a3e64ca1234f
This version of the loop filter supports non-4:2:0 subsampling and
a fourth plane, as well as changing the filtering order to be more
friendly to hardware implementations.
The filters are applied first to all vertical edges within the
64x64 SB, followed by the top horizontal edge and any internal
horizontal edges. Since filtering is applied on each 4x4 edge
serially, a dependency is created from filtering one block edge
to the next. It would be possible to remove this depencnecy by
building all filtering decisions from the unfiltered
reconstruction data.
Change-Id: I08f3e9683eb7bded8a76651cbc50fc0dfdd05fa7
Added structures to support independent rd thresholds
for different block sizes (and set experimental block
size correction factors).
Added structure to to allow dynamic adaptation of thresholds
per mode and per block size basis depending on how often
the mode/block size combination is seen (currently fixed factor).
Removed some unused variables.
TODO
- Adaptation of thresholds based on how often each mode chosen.
- The baseline mode values could also be adjusted based on
the block size (e.g. for a particular intra mode use a low threshold
for 4x4 prediction blocks but a relatively high value for 64x64.
Change-Id: Iddee65ff3324ee309815ae7c1c5a8584720e7568
This avoids encoding tokens for blocks that are entirely
in the UMV border. This changes the bitstream.
Change-Id: I32b4df46ac8a990d0c37cee92fd34f8ddd4fb6c9
This commit makes the coding/reconstruction operations of intra
coding rate-distortion loop for UV components consistent with those
of the encoding process.
key frame coding gains:
derf: 0.11%
stdhd: 0.42%
Change-Id: I8d49f83924a320e3689ef2d60096c49d7f0c7a40
If the codec was configured with --enable-internal-stats,
a seg fault would occur. This patch fixes the problem.
Change-Id: Id10a577973d185e93037c59e5b36bebdded327da
Adds backward adaptation and differential forward updates of switchable
interpolation filter probabilities. Also adds some cosmetic cleanups
and minor fixes on mv_ref probabilities.
derfraw300: +0.353% (with most coming from switchable interp changes)
Change-Id: Ie2718be73528c945fd0d80cfd63ca2d9cb3032de
Condition the existing zbin boost logic for gf/altf mode to temporal layers==1,
since gf/altf reference frames are used in temporal layers as reference frames.
Change-Id: I618bb20730e5f193e078215d06f54997c363dd7b
This commit makes operations of the superblock intra coding rate
distortion optimization consistent with those used in the encoding
process. Given the test prediction mode and transform size, the rd
optimizer encodes and reconstructs each transformed block of the
superblock consecutively, then computes the total rate-distortion
costs accosicated with the current superblock to select the coding
decisions.
It achieves coding performance gains:
derf 0.353%
yt 1.111%
Change-Id: I0da2eb7a71361dfb8c1384927fc536b0c2790d07
Fixes an issue where newer versions of GCC would try to compile the
visual studio inline assembly.
Fixes issue #571
Change-Id: I8e4500a9277447fdab0b55e5efa1f24ca97bdc03
Enable iterative motion search for compound inter-inter prediction
of block sizes 4x4/4x8/8x4 only when best coding quality is selected.
The iterative motion search provides about 0.1% gains for derf and
stdhd at this point, at the expense of longer runtime.
Change-Id: Idc03e7f827e51f1bb8d269bc3752ee297a6bbfe5
Migrates costing changes/fixes from the rebalance expt to the head
without the expt on.
Rebased.
Change-Id: I51677d62f77ed08aca8d21a4c9a13103eb8de93f
Results:
derfraw300: +0.126%
Restrict get_matching_candidate() to considering
mvs at 8x8 and larger sizes for last frame case.
This is to reduce the HW load of using vectors down
to the 4x4 level from the previous frame.
Change-Id: I6505e610fd63a4e22d67f136aec7905a01b893ba
This speed 1 - uses variance threshold stolen from static-thresh
to determine split. Any superblock with greater than the variance
set by static thresh * quantizer index squared is split. In addition
transform size is set to largest size less than or equal to partition
size, sub pixel filter is set to normal, and only 12 modes are used
at all.
Change-Id: If7a2858ee70f96d1eb989c04fd87a332b147abef
We leave it in rdopt.c as a local define for now - this can be removed
later. In all other places, we remove it, thereby slightly decreasing
the size of some arrays in the bitstream.
Change-Id: Ic2a9beb97a4eda0b086f62c039d994b192f99ca5
It remains as a local define in rdopt.c so we can distinguish between
split and non-split modes in the RD loop, but disappears outside that
scope in the codec.
Change-Id: I98c18fe5ab7e4fbd1d6620ec5695e2ea20513ce9
The commit changed to use a new variant of Walsh-Hadamard Transform
by Tim Terriberry. This new variant has the best compression among a
number of variants that developed by Tim.
Change-Id: Icb3a88515463cfc644b17ca046fcd139db2557e9
Fixes an issue with reducing branch cts in the encoder causing
a drop in performance. The bug was introduced in a previous
clean up patch.
Test: Went back to the offending patch, applied this same fix
to it, and checked that results are identical to the parent
of that patch.
Change-Id: I0bad8e2d930235d0284300fcebf836ceb56f2498
The first 240 coeff positions (15 top-left blocks) are scanned in the
same order as in scatter scan, after that the coeffs are scanned in
"block bands", each band at a time, all coeffs in one band before
moving on to the next band. This brings down the amount of 4x4 coeff
blocks that need to be buffered while scanning, from 15 blocks to 8 blocks.
Change-Id: I478a991d63c48bd5e64d36e59fed7a00c9a651ba
This patch removes the implicit segmentation
experiment from the code base as the benefits
were still unproven as of the bitstream deadline.
Change-Id: I273b99d8d621d1853eac4182f97982cb5957247e
This commit enables iterative motion search for 4x4/4x8/8x4 block
size compound inter-inter prediction.
WIP: borg run testing
Change-Id: I2b318db4a03cdca5a8002b3fa6c0fa89b129288b
Fixes:
error C2121: '#' : invalid character : possibly the result of a macro expansion
Change-Id: I63d7ebba29f3a3cbb546406be39270290e9dc47d
(cherry picked from commit a91e5b4fdc)
Added two flags to the frame header:
intra_only:
Signals that the frame is encoded using only INTRA
coding modes.
reset_frame_context:
Indicates that the coding context specified
in the frame header should be reset to default values before the
frame is encoded/decoded.
Change-Id: I182d46f1f84fb67a13c46ad767f246a38d7861a2
We could remove calling set_scale_factors() since it is also
done in set_refs() right after vp9_decode_mb_mode_mv() call in
decode_modes_b().
Change-Id: I9e62c90ffb770240987cd42815786567261b5d97
This patch changes the coefficient tree to move the EOB to below
the ZERO node in order to save number of bool decodes.
The advantages of moving EOB one step down as opposed to two steps down
in the other parallel patch are: 1. The coef modeling based on
the One-node becomes independent of the tree structure above it, and
2. Fewer conext/counter increases are needed.
The drawback is that the potential savings in bool decodes will be
less, but assuming that 0s are much more predominant than 1's the
potential savings is still likely to be substantial.
Results on derf300: -0.237%
Change-Id: Ie784be13dc98291306b338e8228703a4c2ea2242
For 4x4 blocks valgrind points out the cache was uninitalized.
This resolves the issue by setting it.
Change-Id: I22733000da048643762813a84fbda66d8e4040d2
This commit makes clean-ups in the rate-distortion loop for 4x4,
4x8, and 8x4 block sizes for the use of iterative motion search.
Removed unnecessary use of bmi in handle_inter_mode.
Deprecated loop over labels in the 4x4/4x8/8x4 block rd search.
Change-Id: I71203dbb68b65e66f073b37abd90d82ef5ae6826
This patch checks at the frame level to see if the previous
mode info context can be used. This patch eliminates the
flag check that was done for every mode and removes another
check that was done prior to every vp9_find_mv_refs().
Change-Id: I9da5e18b7e7e28f8b1f90d527cad087073df2d73
scales for second reference frame vars are unitialized if the
second ref frame is one of of those disallowed by refframeflags
Change-Id: I4ce42de391178c1699dcaede18c5f12c84993c61
Proposal for tuning the residual coding by changing how the context
from previous tokens is calculated. Storing the energy class of previous
tokens instead of the token itself eases the critical path of
HW implementations.
Change-Id: I6d71d856b84518f6c88de771ddd818436f794bab
Adding API to read/write uncompressed frame header bits (it is not final
yet). Separate functions to read/write uncompressed header. Moving
clr_type, error_resilient_mode, refresh_frame_context,
frame_parallel_decoding_mode, frame_context_idx from compressed partition
to uncompressed frame header.
Change-Id: Id3ed8a387980c652ae147549412f4ec24a0a5bd0
This commit pulls the iterative motion search for compound inter-
inter out from handle_inter_mode_ as a separate function. Hence,
it is applicable to 4x4/4x8/8x4 level compound inter search to be
enabled later.
Also edit the rd loop for 4x4 inter block sizes for cosmetic
purpose.
Change-Id: Ibc71a11cbe5a26cd52faba01026cf8446cf4d2b4
Removed one 4x4 prediction step that was unnessary in the rd loop.
Removed a unused modecosts estimate from encoder side.
Change-Id: I65221a52719d6876492996955ef04142d2752d86
1. remove prediction mode conversion
2. unified bmode, same for key and non-key frame
3. set I4X4_PRED count for pdf to 0, as I4X4_PRED is no longer
coded ever. It is determined by ref_frame and block partition
Change-Id: If5b282957c24339b241acdb9f2afef85658fe47d
This commit removes the use of bmi_ in the first-pass encoding by
forcing encode_intra4x4block_ to use DC_PRED, followed by DCT_DCT
only, as John suggested. This makes the need for bmi buffer only
up to 4 entries, instead of 16.
Change-Id: I3410007dfae789ee46a09ae20c39d3ce3c7954aa
Hardware implementation needs to load coeff probs based on the
transform size. For selectable transform size, moving these bits
earlier in the bitstream adds some delay giving time to preload
the probs and speeds up the decoding process.
Change-Id: I3bfc1f662ae6f219c9286fe9ae6310c7d8a63ea7
Also do per-partition motion vector referencing in <sb8x8 partitions,
and adjust mvref finding for sub8x8 partitions.
Change-Id: Id3ed1ed4d2a8910d11d327db6cc63b8eb79f941f
This code does not seem to be necessary anymore.
For the 1080p clip used, the decoder performance improved by
~2%.
Change-Id: I66bb0496d4998b0d6c6637c746b642b77bdbef88
1) Added an initialization of rd_tx_select_threshs[].
2) Made updating transform size counts to be consistent
Change-Id: Iaa9d6c6be825b0364c9d61a9802873d01356815c
As intra coded blocks are always decoded using decode_sb_intra(), this
commmit removed the code no longer in use.
Change-Id: I09f14fa9cdc875656e8fbe245f72c8fd83b9e31e
The changing in intra coding to base on transform block, i.e. pred->
txfm->quant->dequant-itxfm->recon, made all blocks within a prediction
unit behave consistently, there is no longer a need to handle blocks
differently based on the position within a predicitn block. So this
commit simplifies the decision of transform type to be based on
prediction mode only.
Change-Id: If96cb72386f2e9186126ace88afa35ef085b6c96
This commit refactors the iterative motion search for compound
inter-inter mode, to make it support all partition types including
4x4/4x8/8x4 block sizes.
Change-Id: I5f1212b0f307377291763e45c6bdc9693b5f04c8
Move 4x4/4x8/8x4 partition coding out of experimental list.
This commit fixed the unit test failure issues. It also resolved
the merge conflicts between 4x4 block level partition and iterative
motion search for comp_inter_inter.
Change-Id: I898671f0631f5ddc4f5cc68d4c62ead7de9c5a58
Reverts to using 128 bit LUT for the coef models rather than 48
to ease hardware implementation.
Also incorporates some cleanups including removing various
hooks to support different lookup tables based on block_type and
ref_type.
Change-Id: I54100c120cca07a2ebd3a7776bc4630fa6a153f6
This commit changed the encoding and decoding of intra blocks to be
based on transform block. In each prediction block, the intra coding
iterates thorough each transform block based on raster scan order.
This commit also fixed a bug in D135 prediction code.
TODO next:
The RD mode/txfm_size selection should take this into account when
computing RD values.
Change-Id: I6d1be2faa4c4948a52e830b6a9a84a6b2b6850f6
This commit allows the rate-distortion optimization of intra coding
capable of supporting 8x4 and 4x8 partition settings.
It enables the entropy coding of intra modes in key frame using a
unified contextual probability model conditioned on its above/left
prediction modes.
Coding performance:
derf 0.464%
Change-Id: Ieed055084e11fcb64d5d5faeb0e706d30268ba18
The arm assembly files are named .s after conversion, to reuse
as much of the existing makefile infrastructure for conversion to
gas format as possible. Within the generated visual studio project,
only the converted assembly sources are available, which might not
be optimal for actually developing it, but is acceptable for
just building the library.
Multithreading is disabled since the traditional win32 threading
functions aren't available on WinRT/Windows Phone 8.
Building of vpx itself and the examples succeed, while building the
tests fail due to them using functions not available in the
windows store/windows phone API subsets - therefore the unit tests
are disabled.
This works for building in Visual Studio Express 2012 for Windows
Phone, while Visual Studio Express 2012 for Windows 8 (for
"Windows Store" apps) seems to reject the vcxproj files due to
not supporting "classic style native application or managed
projects". The built static library should be compatible with that
platform though.
Change-Id: Idcd7eca60bfaaaeb09392a9cd7a02e4a670e3b30
Previously, the microsoft arm assembler errored out, saying that
bilinear_taps_coeff was an undefined symbol.
Change-Id: Ib938f0b454c41ccbd801e70a7c9acc0fa04e3c55
The branch instructions are encoded as 16 bit instructions
by the microsoft assembler, while they are encoded as 32 bit
instructions by gnu binutils.
Change-Id: I622b9025df3520c08eef8447df078f5517fb4b67
The API is not final yet and can be changed. Actual layout of
uncompressed frame part will be finalized later. Right now moving
clr_type, error_resilient_mode, refresh_frame_context,
frame_parallel_decoding_mode from first compressed partition to
uncompressed frame part.
Change-Id: I3afc5d4ea92c5a114f4c3d88f96858cccc15b76e
* changes:
msvs: Don't link to winmm.lib
msvs: Pass dependency project vcxproj files to the project generation script
msvs: Support producing both vcproj and vcxproj depending on configure variables
configure: Add x86*-vs10/11 targets
gen_msvs_sln: Support producing versions 10 and 11, handle vcxproj files
Add a new script for producing vcxproj files
Uses more aggrerssive interpolation to reduce storage for the
model tables by almost more than half. Only 48 lists of probs are
stored (as opposed to 128 before), corresponding to ONE_NODE
probabilities of:
1,
3, 7, 11, ..., 115, 119,
127, 135, ..., 247, 255.
Besides, only 1 table is used as opposed to 2 before. So the overall
memory needed for the tables is just 48 * 8 = 384 bytes.
The table currently used is based on a new Pareto distribution with
heavier tail than a generalized Gaussian - which improves results on
derf by about 0.1% over a single table Generaized Gaussian.
Results overall on derfraw300 is -0.14%.
Change-Id: I19bd03559cbf5894a9f8594b8023dcc3e546f6bd
Use a separate counter for resetting the pattern upon
a change in temporal layers, and set/initialize the
layer context parameters for the new temporal layer state.
Also moved the setting of layer configuation in init_config()
to a separate function.
Change-Id: Ic7fc023a1e5490020509e107004645098f4c00f0
This is required since the microsoft assembler claims that
add.w r12, pc, #10
generated unpredictable behaviour.
Change-Id: Ia8e1830def965c88ca4e2f48a24107bac6a4cb9d
The formats are basically the same, but a few minor details need
to be adjusted. Addiitonally, when building for the WinRT/Windows
Phone 8 platforms, one has to build for thumb, so convert instructions
accordingly.
Change-Id: I3c3902aa20fd3bfc29168d3a1bf17111e5481dcb
Linking to this library doesn't seem to be necessary, and this library
isn't available in the windows phone API subset.
Change-Id: I179837d6f9c7407f1cb6101533dc978316a30adf
This is required since the dependencies are specified within the
vcxproj files themselves, not in the solution file. This doesn't
do anything for the old vcproj files.
Change-Id: If7818d8e9dbf4aac5bcb34abe648946cf24db51c
Cleans up the experiment. Actually uses reduced counts for backward
updates, and reduced number of probabilities in the context.
No change in bitstream when the experiment is on.
Between expt on and off:
derfraw300 is down only -0.062% (which is better than when expts
were run previously).
Change-Id: I55285a049a0c22810bdb42914212ab5a4f8521b5
This patch eliminates the intermediate diff buffer usage by
combining the short idct and the add residual into one function.
The encoder can use the same code as well.
Change-Id: I296604bf73579c45105de0dd1adbcc91bcc53c22
The new code is 0x49, 0x83, 0x42
There is nothing particularly special about this code bitstream wise.
Its derivation is the word "sync" coded using 4x6bit alphabetic indices.
Change-Id: Ie2430a854af32ddc5a5c25a6c1c90cf6497ba647
The recursive partition type search is enabled down to 4x4, 4x8 and
8x4, followed by the corresponding rate-distortion optimization for
the per-partition encoding mode decisions.
The bit-stream writing/reading synchronized in supporting the
rectangular partition of 8x8 block.
This provides above 1% coding performance gains on derf.
To do next:
1. re-design the rate-distortion loop for inter prediction below 8x8.
2. re-design the rate-distortion loop for intra prediction below 4x4.
3. make the loop-filter aware of rectangular partition of 8x8 block.
4. clean the unused probability models.
5. update default probability values.
Change-Id: Idd41a315b16879db08f045a322241f46f1d53f20
Correct the stride parameter of 4x8 in vp9_sub_pixel_variance4x8_
and vp9_sub_pixel_avg_variance4x8.
Change-Id: I2ca74d4043817503b21737563994270e3b0619ff
Replace vp9_kf_default_bmode_counts structure with
direct default probabilities. The probability structure is
smaller and it removes the need to specify in the bitstream
how to convert the counts to probabilities.
Note that I have concerns still about the size and value of
the large intra mode context. This may cause problems for
HW but it also means we rely heavily on reverse update as
forwards update of a structure this size is problematic. I
intend to review this more generally in the next few days to
see if we can come up with a competitive solution that does
not rely on such a large context.
Change-Id: I0a36071079d5d26a57ab0e9fbf91af4199aa7984
This is a mostly-working implementation of an extra channel in the
bitstream. Configure with --enable-alpha to test. Notable TODOs:
- Add extra channel to all mismatch tests, PSNR, SSIM, etc
- Configurable subsampling
- Variable number of planes (currently always uses all 4)
- Loop filtering
- Per-plane lossless quantizer
- ARNR support
This implementation just uses the same contents as the Y channel
for the A channel, due to lack of content and general pain in
playing back 4 channel content. A later patch will use the actual
alpha channel passed in from outside the codec.
Change-Id: Ibf81f023b1c570bd84b3064e9b4b8ae52e087592
Deprecate set_block_index. Replace it with get_sb_index_ for
consistency with partition search and bit-stream writing/reading.
Use b_width/height_log2 instead of mi_width/height_log2, to support
4x4 resolution partition types.
Change-Id: Ic1e71981e163c669f7ea6b3c12b831c284c4a494
Replace mi_width/height_log2 with b_width/height_log2 in partition
type parsing at bit-stream writing stage. This allows parsing
resolution at 4x4 block level and makes the 4x4/4x8/8x4 partition
coding consistent with other superblock types.
Change-Id: I7db3617ea042e0db2dc898999b0c323bff91a22f
Test on cif set showed small but consistent compression gain for
almost all encodings with overall impact of .08%. The gains average
aournd .12% combined with D63 adst change.
Test encoding on std-hd set is ongoing..
Change-Id: If4d94799cf0486fb9c770b193e5c386d13d99d59
This patch eliminates the intermediate diff buffer usage by
combining the short idct and the add residual into one function.
The encoder can use the same code as well.
Change-Id: Iacfd57324fbe2b7beca5d7f3dcae25c976e67f45
These building blocks enable rate-distortion optimization search
over block sizes of 8x4 and 4x8. Need to convert them into mmx/sse
forms.
Change-Id: I570ea2d22d14ceec3fe3575128d7dfa172a577de
This patch creates a new inter mode contest that avoids
a dependence on the reconstructed motion vectors from
neighboring blocks. This was a change requested by
a hardware vendor to improve decode performance.
As part of this change I have also made some modifications
to stats output code (under a flag) to allow accumulation of
inter mode context flags over multiple clips
Some further changes will be required to accommodate the
deprecation of the split mv mode over the next few days.
Performance as stands is around -0.25% on derf and
std-hd but up on the YT and YT-HD sets. With further tuning
or some adjustment to the context criteria it should be
possible to make this change broadly neutral.
Change-Id: Ia15cb4470969b9e87332a59c546ae0bd40676f6c
Adds a subsampling aware border extension function. This may be reworked
soon to support more than 3 planes.
Change-Id: I76b81901ad10bb1e678dd4f0d22740ca6c76c43b
This commit allows proper transform type (DCT/ADST) selection in
the settings of partition 4x4 level.
Change-Id: Iec6f922a46480d777e7ca9142a99e8c131f0077b
Always initialize the mode_info with sb_type of BLOCK_SIZE_MB16X16
for the first-pass encoding test.
Change-Id: Ic86393eeef981bdd523a5b44cfac3f0b24c068b7
Combining encode_nmv_component with encode_nmv_component_fp
and read_nmv_component with read_nmv_component_fp. Bitstream is slightly
changed (only the order of bits), here are the results on test sets:
stdhd: +0.047, yt: -0.038, derf: +0.001, hd: -0.011.
Change-Id: I1be312e976796df78ca63368702d0ee19f2b8c50
Using == ended up matching no matter what string was passed in
(which so far only happened if when the -thumb parameter
was set).
Change-Id: Ifa7b611d016d984aec3b697b5a1a07839f7508dc
This patch eliminates the intermediate diff buffer usage by
combining the short idct and the add residual into one function.
The encoder can use the same code as well.
Change-Id: Iea7976b22b1927d24b8004d2a3fddae7ecca3ba1
Trial use of a combination of reference frame,
prediction block size and mv to define segmentation.
Change-Id: Ie8946a0446dbad777fdcf7626f89e5af0994db50
This patch eliminates the intermediate diff buffer usage by
combining the short idct and the add residual into one function.
The encoder can use the same code as well.
Change-Id: I4ea09df0e162591e420d869b7431c2e7f89a8c1a
This commit allows the rate-distortion optimization recursion
at encoder to go down to 4x4 block size. It deprecates the use
of I4X4_PRED and SPLITMV syntax elements from bit-stream
writing/reading. Will remove the unused probability models in
the next patch.
The partition type search and bit-stream are now capable of
supporting the rectangular partition of 8x8 block, i.e., 8x4
and 4x8. Need to revise the rate-distortion parts to get these
two partition tested in the rd loop.
Change-Id: I0dfe3b90a1507ad6138db10cc58e6e237a06a9d6
Allow motion search multiple times iteratively, and break out
the loop if this search couldn't find better motion vectors.
Limit the maximum number of search to 2.
Tests results:
1. stdhd set: 0.311%(overall psnr); 0.346%(ssim).
positive gain on 10 out of 16 clips(best: 2.746% on sunflower;
worst: -0.434% on old_town_cross).
2. derf set: 0.016%(overall psnr); 0.062%(ssim).
positive gain on half of the clips(best: 0.499% on bowing;
worst: -0.387 on city).
Change-Id: Ibf0a51776d4caf7707be0586346db08128117559
Change band calculation back to simpler model based
on the order in which coefficients are coded in scan order
not the absolute coefficient positions.
With the scatter scan experiment enabled the results were
appear broadly neutral on derf (-0.028) but up a little on std-hd +0.134).
Without the scatterscan experiment on the results were up derf as well.
Change-Id: Ie9ef03ce42a6b24b849a4bebe950d4a5dffa6791
Currently this only supports thumb2.
This involves rewriting certain instructions that can't be expressed
in thumb2 into equivalent instruction sequences. The regexps for
rewriting are currently written pretty narrowly, only covering the
exact cases currently encountered in the code base.
No IT instructions are added (since that would require more logic than
plain regexps), so using the thumb mode requires enabling
-mimplicit-it=always/thumb.
Change-Id: I1f676ad1d351381f02bcf00105102aa8dd7ae364
Move set_partition_seg_context_ to common file. Use consistent
context setup conditions for partition probability model update at
encoder and decoder.
Change-Id: I24b7ed3b1c48e3d2568191a46b70136b99b67b1a
Use 4x4 block coding for UV components arbitrarily in I4X4_PRED and
SPLITMV coding modes. This is a temporary solution to enable
bit-stream support for recursive partition down to 4x4 block size.
Will separate the functionalities of 4x4 block coding rate-distortion
out from those of superblocks.
Change-Id: I03dc15d5897014f175f3f2c91e9b266091d56797
In current code, motion vectors got from single prediction mode are used
in compound prediction mode directly. These motion vectors may not give
accurate prediction since they are searched independently. In this patch,
we took Pascal's suggestion, and did joint motion search in compound
prediction mode to find better motion vectors in this situation.
Test results:
Overall PSNR: 0.570%(derf), 0.918%(stdhd);
SSIM: 0.572%(derf), 1.009%(stdhd);
The encoder is a little slower. This can be improved since some c
code is used in motion search.
Change-Id: Ib30c9240f6c56c9b070867b4ca89412a76d9f3c6
This commit enables the search for the optimal superblock
partition types in the recursion form. The intention is to
make the optimization process more concise and ready to
support partition down to 4x4 block size next.
Change-Id: Iae279a67df3a7cc372553c84c775bc4d2f3e4336
The previous code was somewhat vestigial for 16x16 MI units, but was
incorrect when called with chroma blocks larger than 4x4 because the
block index caused a reference to a non-existent BMI. This patch uses
the same MV for all chroma subblocks in SPLITMV mode, which is
suboptimal for non-4:2:0 subsamplings, but as SPLITMV may be removed
in the near future, will use this as a stop gap.
Change-Id: I3211cee5ccf1cfb426e5eef5353b0ce5bb92b4cd
Make framebuffer allocations according to the chroma subsamping
factors in use. A bit is placed in the raw part of the frame header for
each of the two subsampling factors. This will be moved in a future
commit to make them part of the TBD feature set bits, probably only set
on keyframes, etc.
Change-Id: I59ed38d3a3c0d4af3c7c277617de28d04a001853
The chroma planes are not used during the first pass encode,
but the vp9_encode_sb() function was operating on them anyway.
This was causing the use of uninitialized memory.
Change-Id: I5ebafcd3d5e34ed91a8336dad159b573995a939f
Code was previously using VPX_IMG_FMT_VPXI420, which was intended to be the
"vpx" non-YUV colorspace variant.
Change-Id: Icf8771eeefeb574055ed638a93450c3d0ed5b9f5
Update and buffer left/above partition information context per 8x8
block. This allows to further enable recursive partition down to
4x4 block size, and hence deprecating I4X4_PRED and SPLITMV.
This commit also fixes a context buffer swap/restore issue in 32x32
partition type search. This gives 0.1% performance gain for derf/yt.
Will refactor the superblock partition type search into recursion
form.
Change-Id: Ib61975aca5f12b78d8018481d7fa1393d085689b
Makes the temporary storage of the filtered data agnostic to
the number of planes and how they're subsampled.
Change-Id: I12f352cd69a47ebe1ac622af30db29b49becb7f4
Skip Q values between the q.0 mode and a real q of
2.0 as these are not valuable from an RD perspective.
Change-Id: I110c4858c57f97315953f4d88a2596d4764360df
Disables the part of the error-resilient test that tests the
quality after dropping undroppable frames. It's not clear how
to set the threshold for this correctly at the moment.
Change-Id: I3ee4a0d475498f44711fdef05749f305e8d08591
This reverts commit b24735c622
since the adjusted threshold doesn't allow the existing tests
to pass. Will disable the failing test in a separate commit.
Change-Id: I26d41cf6175f300bbad493cecdc96e6b0dd6f2fe
There is only one instance of these structures, no need for them
to be allocated separately on the heap.
Change-Id: I1333cc92d06bbe21be643c2b2f0e3936f0264cac
Adds a new experiment CONFIG_NON420 that allows other chroma subsamplings
to be passed to the codec. This commit allows the data to be passed from
a y4m input file through vpxenc to the codec, where they're currently
rejected. Later commits will finish support for this inside the codec.
Change-Id: Ib3aac604d8cad9e24cef395fa1067f16ba7e8e43
This setup is now handled by vp9_build_intra_predictors()
when left_available and/or up_available is zero.
Change-Id: I59cec0ab95f8be69ce885fd20727510e4deef8a0
Iterating over all planes in the loop instead of custom y,uv code inside
handle_inter_mode function.
Change-Id: I301f9276d6d544c2fd7203d84f1318ac80ea625d
Disable the use of scaled reference frame for motion search in
SPLITMV mode. This fixes the unit test failure issue triggered
when merging sb8x8 from experimental list.
Change-Id: I02ac25fd8db8d5762f8fee29513b947189875fa0
This allows removing a large number of transform size specific functions,
as well as supporting 444/alpha by routing all code through the
subsampling-aware path.
Change-Id: Ieb085cebe9f37f24fc24de179898b22abfda08a4
The number of reference buffers is extended to 8 and
a reference sign-bias added for the LAST_FRAME.
Whilst the number of reference buffers used by an
individual frame remains unchanged at 3, these may
now be selected from 8 possible buffers.
Change-Id: I2d247b9c1c2b3a339d6c9fac125e81ba373f75a7
With this, encoder/decoder appear to match with sb8x8 experiment.
Needs some larger-scale testing.
Change-Id: I44d3cac37b3c98264985ed0a0fc763c30089aa64
Creates a common encode (subtract, transform, quantize, optimize,
inverse transform, reconstruct) function for all sb sizes, including
the old 16x16 path.
Change-Id: I964dff1ea7a0a5c378046a069ad83495f54df007
Don't allow i4x4 except for sb8x8 recursion step. Read only 4 (not 16)
i4x4 submodes if we are i4x4.
Change-Id: Iaaaced1a134006b2c96eed66f014300eae41e0ed
input_ is filled with random values just afterward.
the size was wrong anyway as input_ is allocated with memalign so
sizeof(input_)==sizeof(uint8_t*)
Change-Id: I014b832ac60960cd22b6f369dbc9fd648d4055b5
When using 'always_inline' 'inline' should be specified as well.
Thanks to Digit for identifying this:
https://chromiumcodereview.appspot.com/14820003/
Change-Id: If1647fac91b85ecabe6d3cd04290d5c08c5a11ea
If a reference frame is inter, the only valid modes would
be inter modes. This check is unnecessary.
Change-Id: Ib8433ab5a3418f94149ee4e3062d48d7740d225a
This doesn't affect the output, because in previous cases where the
values were uninitialized, this was because the mb_row/col is outside
the codable area, and thus encode_sb will test them for the next
decomposition-level, but return right after that on size-check. All
this does is prevent a warning in valgrind.
Change-Id: I90d8a29e6f8ebb2b0143684e08fe77ae3a0816b1
The support for detecting hardfp toolchains in af9dd50e is a
step in the right direction, but that particular switch case
isn't executed at all if the toolchain variable is set.
This fixes cross building from x86 ubuntu to armhf ubuntu,
in configurations such as
"CROSS=arm-linux-gnueabihf- ./configure --target=armv7-linux-gcc".
Change-Id: I6f141361e40374fbab564f9196d90e598fe9a0f6
The decode_mb only carries I8X8_PRED decoding, which will be covered
by the regular MB intra modes when SB8X8 is on. To be removed later.
Change-Id: I3b9ee55917a30b42518b81987bc10c22b1a19e7f
Work-in-progress, not yet ready for review. TODO items:
- bitstream writing (encoder) and reading (decoder)
- decoder reconstruction
Change-Id: I5afb7284e7e0480847b47cd0097cb469433c9081
Changing the order of probabilities inside mb_segment_tree_probs in order
to use treed_read/treed_write function instead of custom code.
Change-Id: I843487d5057913b9358db73da270893eefecc6c8
Moving common code from encoder and decoder to vp9_get_qindex function.
Also moving quant-related constants from vp9_onyxc_int.h to
vp9_quant_common.h.
Change-Id: I70c5bfbaa1c8bf00fde0bfc459d077f88b6d46c8
Separate the decoding process of 4x4 block based coding (both intra
and inter) from decode_mb and move it into decode_atom_. This allows
to further move the rest per 16x16 block decoding of decode_mb into
decode_sb, and hence eventually deprecating decode_mb when SB8X8 is
enabled.
Change-Id: I678cb8007d8a57b792d7a23020edb0c74fbf4237
Separate the functionality of I4X4_PRED from decode_mb. Use
decode_atom_intra instead, to enable recursive partition of superblock
down to 8x8.
Change-Id: Ifc89a3be82225398954169d0a839abdbbfd8ca3b
Ensures that the full 64 pixel border is available for prediction (need a minimum of
64+INTERP_EXTEND on all sides, and 32+INTERP_EXTEND on UV). Value also must be a
multiple of 32 to keep UV stride alignment. The smaller border was causing the prediction
to read outside the frame, which can cause a mismatch.
TODO: Get rid of this explicit border and use edge emulation instead.
Change-Id: I3f68453a088ec0ab4349d0f5cc02b573be06d7c4
Also fixed two minor subtle boundary conditions in intra prediction
code, and replaced memcpy/memset with vpx_ prefixed version.
Change-Id: I9cddff3be831228b628f1f2f065a61feacbcbee6
The commmit changed to use same intra prediction function for all
block sizes.
Some details on the changes:
1. All directional modes except DC/TM/V/H now have built-in filtering
for all pixels with filter taps either (1, 2, 1)/4 or (1, 1)/2.
2. Above edge get automatic extended to double width (bw*2), which
makes a lot of the prediciton mode computation simpler.
3. Same intra prediction function is called with different size
for i4x4_pred and all other larger size.
Overall, the change helped keyframe only coding for both cif size
and std-hd size test sets by .5% consistently on all encodings.
For normal coding with single/auto key frame, the change now also
is consistently net positive for all encodings. The overall gains
is about .15% on std-hd set.
Change-Id: I01ceb31fbc73d49776262e6bdc06853b03bbd1d1
Updates the tokenizer to use the common block walker used by the
detokenizer, to support non-4:2:0 and more than 3 planes.
Change-Id: If1854117a9c7c1427349209fa2b3051ce6459dcb
This doesn't change output, because the argument isn't actually used
ATM. However, we should fix it for consistency.
Change-Id: I7b7326a8e92c0d411c999ec2c781204b516ed53d
Unify the tokenize_ function and enable configurable block size for
superblock 8x8. We are immigrating the functionalities of
macroblock handles into superblock ones, and eventually will remove
encode_mb and decode_mb. To be continued on detokenize_ module.
Change-Id: I9f81e8c2291082535cf5e0c4b662eb24fb7c8a7f
Output changes slightly because of a minor bug in (at least) the sb32x16
block2above tx16x16 tables that previously existed in vp9_blockd.c.
Change-Id: I624af28ac200a8322d64454cf05c79e9502968cc
Turns model based reverse updates on for coefficients in an
effort to reduce the memory requirement for counters.
With this patch the counters needed will be reduced by about
75% since only 3 counts are needed instead of 12.
The impact in performance is:
derf300: -0.252%
stdhd250: -0.046%
However retraining should alleviate some of the drop in
performance.
Change-Id: I6f2b3e13f6d5520aa3400b0b228fb5e8b4a43caa
First patch to make sb decoding based on the transform size. This patch
is working for the sb modes, combining the parts of decode_mb that fit
into this framework will come as a second patch.
Change-Id: I26123416a7a87e096bbdb5eb944ce5bb198384f8
Conflicts:
vp9/common/vp9_findnearmv.c
vp9/common/vp9_rtcd_defs.sh
vp9/decoder/vp9_decodframe.c
vp9/decoder/x86/vp9_dequantize_sse2.c
vp9/encoder/vp9_rdopt.c
vp9/vp9_common.mk
Resolve file name changes in favor of master. Resolve rdopt changes in
favor of experimental, preserving the newer experiments.
Change-Id: If51ed8f457470281c7b20a5c1a2f4ce2cf76c20f
All members can be referenced from their per-plane counterparts, and
removes assumptions about 24 blocks per macroblock.
Change-Id: I7ff2fa72d22c29163eb558981c8193765a8113d9
The previous commit 15255ee "Move dequant from BLOCKD to per-plane MACROBLOCKD"
removed the vp9_asm_enc_offsets.c file, but didn't update the various secondary
build systems that special case these files. Restore it for now, to ensure any
in-progress changes and builds continue working, to allow time to more carefully
coordinate removal of these files.
Change-Id: I24b78db3fb874d5fbd226548b7366a05ed98e536
This originally was "Removed update_blockd_bmi()". Now,
this patch removed bmi from blockd and uses the bmi found
in mode_info_context. Eliminates unnecessary bmi copies between
blockd and mode_info_context.
Change-Id: I287a4972974bb363f49e528daa9b2a2293f4bc76
vp9_dequantize_x86 has only sse2 functions.
vp9_dct_sse2_intrinsics has no namespace collision and can drop
_intrinsics.
vp9_idct_mmx.h is unused.
Change-Id: Ic16e31fb372a1d1e841a62ecb4189fe8f95808ec
Basic assumption: when talking about transform units, use b_; when
talking about macroblock indices, use mb_.
Change-Id: Ifd163f595d4924ff892de4eb0401ccd56dc81884
The quantizer can vary per-plane, and the dequantization vector is
available in the per-plane part of MACROBLOCKD. The previous code would
incorrectly use the Y quantizer for the whole macroblock.
Change-Id: I3ab418aef9168ea0ddcfa4b7c0be32ae48b536d7
The underlying storage for these buffers is in the per-plane MACROBLOCKD
area, so read it from there directly.
Change-Id: Id6bd835117fdd9dea07db95ad06eff9f12afaaf7
All members can be referenced from their per-plane counterparts, and
removes assumptions about 24 blocks per macroblock.
Change-Id: I593fb0715e74cd84b48facd1c9b18c3ae1185d4b
Remove similarly named header file. It is obsolete.
Move file to match naming style.
Adjust make file to include the file correctly and remove extra
unnecessary #if guard.
Change-Id: Ifba07ba9938a5df08a9f4eda54a3ac4d6983f7bf
Using ALLOWED_REFS_PER_FRAME constants instead of hard coded 3, replacing
memcpy with plain struct assignment.
Change-Id: Ibc86f5d175fcb3f3a3eddacf593525370f1f854c
Function set_mb_row() and set_mb_col() do similar work and are always
called together, this commit merged them into a single function for
clarity and easy maintainence. This was a TODO item.
Change-Id: I956bd9ed6afb8b2b0469b20fd8bc893b26f8a0f3
This commit enables selecting probability models for recursive block
partition information syntax, depending on its above/left partition
information, as well as the current block size. These conditional
probability models are reasonably stationary and consistent across
frames, hence the backward adaptive approach is used to maintain and
update the contextual models.
It achieves coding performance gains (on top of enabling rectangular
block sizes):
derf: 0.242%
yt: 0.391%
hd: 0.376%
stdhd: 0.645%
Change-Id: Ie513d9673337f0d27abd65fb566b711d0844ec2e
The only reason for the _intrinsics part of the file name was for the
interim period where only one of the functions was redone and the base
file name was the same.
Change-Id: I7851154f1633d48821bee885b1cadb2148e65a23
This minor tweak makes segment 0 neutral and used by
key frames and also extends beyond 4 segments.
Change-Id: Ife4744602aba66ac9432746db3113cc5cd88a482
Also some further simplification following removal
of top node code.
There is an issue in regards to the shared file vp8cx.h
in regard to the roi_map as this interface assumes that
there are only 4 segments. I have left the value here as
4 for now meaning that the roi_map interface is broken
for VP9.
Note that this change would have been easier if I hadn't
had to search for hard wire instances of the number 4
and <= 3.
Change-Id: Ia8b6deea4be4dbd20deb1656e689dd43a5f190e8
Remove top node optimization.
The improvement this gives is not sufficient to justify
the extra complexity.
Change-Id: I2bb4a12a50ffd52cacfa4a3e8acbb2e522066905
Quantizers can vary per plane, but not per block. Move these values to
the per-plane part of MACROBLOCK.
Change-Id: I320a55e38b7b28b29aec751a4aca5ccd0c9b9326
This commit moves the coeff storage from the MACROBLOCK struct to its
per-plane part. The next commit will remove the coeff member from the
BLOCK structure so that it is consistently accessed per-plane.
Also refactors vp9_sb_block_error_c and vp9_sb_uv_block_error_c to be
variable subsampling aware.
Change-Id: I18c30f87f27c3a012119b6c1970d5fa499804455
This commit enables rectangular block prediction of compound
inter-intra mode. It combines the mb/sb32/sb64 prediction functions
into a unified version with configurable block width and height.
This fixes the enc/dec mismatch of the codebase when
comp-interintra-pred is enabled.
Change-Id: I1d0db2f1f184007802df04fcd12b9dadb3189ff0
Clean Windows build warnings:
warning C4028: formal parameter <N> different from declaration
This was fixed independently in master and experimental but the fixes
were in opposite directions. One added const to the declaration and the
other removed it from the implementation.
Also update the variable names. This doesn't modify the data so call it
ref, matching the functions in the vicinity, rather than dst.
Change-Id: I2ffc6b4a874cb98c26487b909d20a5e099b5582c
Fix warning on windows: signed/unsigned mismatch on lines 415, 454
Comparison was between size_t data_sz >= int index_sz on 415 and
unsigned int data_sz >= int index_sz on 454. Both might be changed to
size_t but that would be tracing and replacing all comparisons is
outside the scope of this change.
In the rest of these two functions ensure unsigned values are used
consistently.
Change-Id: I922b399ceca612a92f44b9d1d331c1c6bae9d768
Also use explicitely named enum values in sb_type comparisons, rather
than relying on absolute integer values, because enum values may
change in the future.
Change-Id: I72d42971a98157af93413a25ac2c7e6f9b369cec
First in a series of commits making certain MACROBLOCK members
addressable per-plane. This commit also refactors the block subtraction
functions vp9_subtract_b, vp9_subtract_sby_c, etc to be
loops-over-planes and variable subsampling aware.
Change-Id: I371d092b914ae0a495dfd852ea1a3d2467be6ec3
This version of speed 1 only disables modes at higher resolution that
had distortions >2x the best mode we found...
The hope is that this could be a replacement for speed 0 ...
Change-Id: I7421f1016b8958314469da84c4dccddf25390720
Mostly for cleanup purposes. Now we should be able to rework
the encoder/decoder to use a common idct/add function.
Change-Id: I1597cc59812f362ecec0a3493b6101a6cc6fa7ff
This fixes an intermittent mismatch issue cause by moving
the lossless mode decoding bit to after the loop filter
setup information. We need to ensure that the lossless bit
is decoded prior to loop filter setup.
Change-Id: I3faa3fff8e1013b7405dac91268350e059ed121e
Adds an experiment that codes an end-of-orientation symbol
for every eligible zero encountered in scan order.
This cleans out various other sub-experiments that were part
of the origiinal patch, which will be later included if found
useful.
Results are slightly positive on all sets (0.1 - 0.2% range).
Change-Id: I57765c605fefc7fb9d1b57f1b356843602abefaf
Removes the redundant dst pointers from vp9_build_inter_predictors_sb{y,uv}
and the remaining mb specific functions.
Change-Id: I7b6bf439d9394b85ea79b4fe61a3ffc1025720da
Wherever there are real pixels available before falling back to use
assumed values 127 and 129.
This also make DC_PRED for i4x4 consistent with DC_PRED for larger
blocks.
Change-Id: I54372924826118da023f402c802ac6ce0caa70c3
First in a series of commits moving the framebuffers pointers to
per-plane data, so that they can be indexed numerically rather than
by name.
Change-Id: I6e0d60fd4d51e6375c384eb7321776564df21775
For 1080 material, this buffer is currently 2,270,928 bytes. This patch swaps
ptrs instead of copying and uses the last show_frame flag instead of setting
the entire buffer to zero. For the test clip used, the decoder improved by up
to 1%.
Change-Id: I686825712ad56043e09ada9808dc489f875a6ce0
Remove the unnecessary _s_ from their names, and add a new
vp9_recon_sb() that calls the y and uv variants.
Change-Id: I7ffaa5ff5605a8472cac2a53de8cf889353039a6
Similar to the prior change that removed the rounding from non-SPLITMV
modes. Improves quality by a similar amount (Additional +0.087% on derf)
Change-Id: I39d80b4a3037a3aa7e285eb2320346ddaf646f52
Further simplification of mvref search to return
only the top two candidates. Distance weights removed
as the test order reflects distance anyway.
Change-Id: I0518cab7280258fec2058670add4f853fab7b855
As we are no longer able to sort the candidate
mvrefs in both encoder and decode and given
that the cost of explicit signalling has proved
prohibitive, it no longer makes sense to find more
than 2 candidates.
This patch:
Modifies and simplifies add_candidate_mv()
Removes the forced addition of a 0 vector in the
MAX_MV_REF_CANDIDATES-1 position (in preparation
to reducing MAX_MV_REF_CANDIDATES to 2).
Re-orders the addition of candidates slightly.
This actually gives small gains (circa 0.2% on std-hd)
A subsequent patch will remove NEW_MVREF experiment,
reduce MAX_MV_REF_CANDIDATES to 2 and remove distance
weights as these are implicit now in the order.
Change-Id: I3dbe1a6f8a1a18b3c108257069c22a1141a207a4
Adjustments take heavier account of the frame near a kf
in deciding boost and limit the total number that can contribute.
Also adjusted the minq calculations such that in most cases we
generate a smaller key frame.
Modified the code that accounts for how static the sequence is and
added some adjustment based on image size. This is still very
crude but smaller images tend to behave better with a larger
delta between KF Q and other frames than larger image formats.
Changes give sizable gains in overall PSNR on all the test sets but the
biggest gains (~3%) were on the std-hd set.
The gains were smaller for SSIM but still significant.
Average PSNR results are mixed because this metric can very easily
be altered by having a very good / lossless coding of one or two frames.
Some of the YT and YT-HD clips in particular have blank lead ins and
allowing lossless coding of these appears to make a big difference to
average PSNR but it reality does not help much at all.
Change-Id: I6bfe485a1d330b47c783832f1717c95c535464ec
Consider the previous behavior for the MV 1 3/8 (11/8 pel). In the
existing code, the fractional part of the MV is considered separately,
and rounded is applied, giving a result of 6/8. Rounding is not required
in this case, as we're increasing the precision from a q3 to a q4, and
the correct value 11/16 can be represented exactly.
Slight gain observed (+.033 average on derf)
Change-Id: I320e160e8b12f1dd66aa0ce7966b5088870fe9f8
This commit converts the luma versions of vp9_build_inter_predictors_sb
to use a common function. Update the convolution functions to support
block sizes larger than 16x16, and add a foreach_predicted_block walker.
Next step will be to calculate the UV motion vector and implement SBUV,
then fold in vp9_build_inter16x16_predictors_mb and SPLITMV.
At the 16x16, 32x32, and 64x64 levels implemented in this commit, each
plane is predicted with only a single call to vp9_build_inter_predictor.
This is not yet called for SPLITMV. If the notion of SPLITMV/I8X8/I4X4
goes away, then the prediction block walker can go away, since we'll
always predict the whole bsize in a single step. Implemented using a
block walker at this stage for SPLITMV, as a 4x4 "prediction block size"
within the BLOCK_SIZE_MB16X16 macroblock. It would also support other
rectangular sizes too, if the blocks smaller than 16x16 remain
implemented as a SPLITMV-like thing. Just using 4x4 for now.
There's also a potential to combine with the foreach_transformed_block
walker if the logic for calculating the size of the subsampled
transform is made more straightforward, perhaps as a consequence of
supporing smaller macroblocks than 16x16. Will watch what happens there.
Change-Id: Iddd9973398542216601b630c628b9b7fdee33fe2
Use in-place buffers (dst of MACROBLOCKD) for macroblock prediction.
This makes the macroblock buffer handling consistent with those of
superblock. Remove predictor buffer MACROBLOCKD.
Change-Id: Id1bcd898961097b1e6230c10f0130753a59fc6df
Updates the common convoloution code to support blocks larger than
16x16, and rectangular blocks. This uncovered a bug in the SSSE3
filtering routines due to the order of application of saturation.
This commit fixes that bug, adjusts the unit test to bias its
random values towards the extremes, and adds a test to ensure that
all filters conform to the expected pairwise addition structure.
Change-Id: I81f69668b1de0de5a8ed43f0643845641525c8f0
Moving all the probability updates after frame context selection.
This makes it clean and simple to store all the probs in single
struct that can be sent to hardware codec.
Change-Id: I2ec3de81adbd468d8ef34a914caae80a18c3ef56
List of moved functions: vp9_decode_uniform, vp9_decode_term_subexp,
vo9_inv_recenter_nonneg, vp9_decode_unsigned_max.
Change-Id: Ib518beb90b791690c5c93de17b8bdbf560033b41
Add the config directory to the rtcd generation script. libvpx is
configured in the jni directory but ndk-build is intended to be run from
the next directory up. Currently it needs to be run from the jni
directory but this is being looked in to.
Add a trailing slash to allow the variable to be empty.
Reduce offset generation to the files which are actually used.
Change-Id: Ia84fac37e8998ba647423d0ee45fc66a891ce10c
Adds RD integration for 32x16, 16x32, 64x32 and 32x64 rectangular blocks.
Derf almost +0.6%, HD a little over +1.0%, STDHD +1.3%.
Change-Id: Id651fdb6a655fdbb5c47009757e63317acfb88a5
Enable recursive partition information coding from SB64X64 down to
MB16X16. The bit-stream syntax is now supporting rectangular block
sizes. It starts from SB64X64 and recursively describes the partition
type of the current block. If the partition type is PARTITION_NONE,
the block is coded as a single unit; if it is PARTITION_HORZ or
PARTITION_VERT, the block is segmented into two independently coded
rectangular units, with no further partition needed; otherwise, the
block is segmented into 4 square blocks. i.e., PARTITION_SPLIT case,
each can be potentially further partitioned.
Forward adaptive probability modeling is used for the partition
information coding, conditioned on the current block size.
Change-Id: I499365fb547839d555498e3bcc0387d8a3587d87
This function is now called from configures the ARNR
filter so it belongs with the other temporal filter
functions.
Change-Id: I64211875918364b5b8edfb97743e573c6def1663
Normalization of the frame boost value was being done
when it reached the value 1028. The intention was to
keep to a range of 10 bits, so it should have been
clipped above 1023.
Change-Id: I0afdddc1d2eb9e7822ec4578903cbe6ec0b33b91
This flag was added to VP8 to allow a mode where MB-level skipping
was not allowed, saving a bit per mb. It was never used in practice,
and hasn't been tested in VP9, so remove it.
Change-Id: Id450ec6904c6d06c1919508e7efc52d05cde5631
tx_type == DCT_DCT check is an implementation detail of iht_add. Also
adding dequant_add_y function with explicit DCT_DCT check inside.
Change-Id: Ia3cb0225601752cdef0ff6f0acd3a09d9dbd8938
In decoder, the scaling calculation, such as (mv * x_num / x_den),
is fairly time-consuming. In this patch, we check if the scaling
happens or not at frame level, and then decide which function to
call to skip scaling calculation when no scaling is needed. Tests
showed a 3% decoder performance gain.
Change-Id: I270901dd0331048e50368cfd51ce273dd82b8733
This is the first CL with vp9_reader changes. All another macro
definitions will be replaced after.
Change-Id: I1c6bd9c9a612ec1663d484d6adb4fb720af54063
Static threshold results slightly up (+0.1% on derf), probably b/c
we now take the filter (sharp/lowpass) into account for the breakout
decision.
Change-Id: I9f597601da434205142afd05f32690e7ba8fd690
This is work-in-progress, it implements multiple ARF
encoding behind an experimental flag.
It adds the ability to insert multiple ARF frames into a
single ARF group. This patch implements the reordering
of the coded frames, and implements a fixed-length coding
pattern. It applies a fixed quantizer strategy based on
where the frame is in the coding sequence.
Further work to modify the rate control strategy is
ongoing and will be submitted via a set of future patches.
In this first step, each ARF group is recursively
bisected and an ARF frame added at that position in the
sequence. The recursion continues until ARF frames are
within MIN_GF_INTERVAL frames.
The code sits behind the "multiple-arf" experimental
flag ("CONFIG_MULTIPLE_ARF"). The experimental flag
"oneshotq" ("CONFIG_ONESHOTQ") also needs to be enabled
for this patch to work correctly.
Change-Id: Ie473b05ebb43ac473c0cfb659b2b8042823085e2
Combine superblock inter predictors into a unified function that
allows configurable block width and height. The inter predictions
of block sizes smaller than 16x16 are handled differently. To be
continued on merging them later.
Change-Id: I14075959dd5e221f00c205c99ca35c1c31ef728e
To match the order of directional intra prediction modes for larger
blocks, also renamed the i4x4 prediction modes to mirror the larger
variants.
Change-Id: I77cea4d0add6c7758460bf9c7a2fe59aca601f0b
Use local variable for setting the improved prediction mode.
cpi->sf.improved_mv_pred is set/fixed at the frame level
and should not be changed inside pick_inter_mode.
Change-Id: Ie28d9171ac000e631af0e30204970e3d4fff3078
The probabilities derived from these statistics are used in bitstream
writing; therefore, we should only do this when we actually decide to
use macroblock coding (over superblock coding). Derf gains +0.15%.
Change-Id: I196814c070a7c79889590658ce10a6eb07454389
The intra predictor supports configurable block sizes. It can handle
intra prediction down to 4x4 sizes, when enabled in BLOCK_SIZE_TYPE.
Change-Id: I7399ec2512393aa98aadda9813ca0c83e19af854
Rename pick_mb_modes to pick_mb_mode, since it now handles only a
single macroblock. This is consistent with pick_sb_mode handling a
single non-macroblock.
Change-Id: I896fdfa06436b2d8c24d6474718cc74420df6b3b
This patch changes the default with the modecoefprob expt
to use mode-based forward updates with one-node pegged
modeling.
The maximum difference with fully trained tables is now
less that 0.1%.
Change-Id: I06b44322e10c6703f93f3c1d48d973b1136a0618
This patch will use the dest buffer instead of the
predictor buffer. This will allow us in future commits
to remove the extra mem copy that occurs in the dequant
functions when eob == 0. We should also be able to remove
extra params that are passed into the dequant functions.
Change-Id: I7241bc1ab797a430418b1f3a95b5476db7455f6a
More specifically, remove vp9_quantize_mb*, vp9_optimize_mb*,
vp9_inverse_transform_mb* and vp9_transform_mb*. Instead, use the
generic _sb* functions that take a size argument, and call them with
BLOCK_SIZE_MB16X16.
Change-Id: I33024afea95d3a23ffbc1df7da426e4645110f29
With these fixed, the codec produces identical results regardless of
what literal values are used for the enum members in BLOCK_SIZE_*.
Change-Id: I26db8e08019b58ba432af1f0950ebe6b0eb4ad8c
Merge various super_block_yrd and super_block_uvrd versions into one
common function that works for all sizes. Make transform size selection
size-agnostic also. This fixes a slight bug in the intra UV superblock
code where it used the wrong transform size for txsz > 8x8, and stores
the txsz selection for superblocks properly (instead of forgetting it).
Lastly, it removes the trellis search that was done for 16x16 intra
predictors, since trellis is relatively expensive and should thus only
be done after RD mode selection.
Gives basically identical results on derf (+0.009%).
Change-Id: If4485c6f0a0fe4038b3172f7a238477c35a6f8d3
The unified dequantization, inverse transform, and adding functions
support rectangular block sizes. Also separate the operations on
luma and chroma components, in the consideration of the txfm_size
for uv components in rectangular block sizes.
Change-Id: I2a13246b2a9086b37d575d346070990d854cc110
The strategy to run fast loop filter picking for encoder speed-up
should be revisited at a later stage.
Change-Id: I3b75e06d767cff41be952a42e63b3292f4eab996
Merge sb32x32 and sb64x64 functions; allow for rectangular sizes. Code
gives identical encoder results before and after. There are a few
macros for rectangular block sizes under the sbsegment experiment; this
experiment is not yet functional and should not yet be used.
Change-Id: I71f93b5d2a1596e99a6f01f29c3f0a456694d728
Restructure the code to avoid the majority of per-block-size
switches, code duplication, etc. All block types (mb/sb32/sb64)
can be handled by the same code.
Change-Id: I4022718d66e31a15a7074e43f3b98cd0a5124ea7
Removing several commented code blocks, using uint32_t and uint8_t types,
removing redundant code.
Change-Id: Ifc5cc9863897925ea2a7cab4f7309ccf28d80bfe
Clamp only the motion vectors inferred from neighboring reference
macroblocks. The motion vectors obtained through motion search in
NEWMV mode are constrained during the search process, which allows
a relatively larger referencing region than the inferred mvs.
Hence further clamping the best mv provided by the motion search may
affect the efficacy of NEWMV mode.
Synchronized the decoding process. The decoded mvs in NEWMV modes
should be guaranteed to fit in the effective range. Put a mv range
clamping function there for security purpose.
This improves the coding performance of high motion sequences, e.g.,
derf set:
foreman 0.233%
husky 0.175%
icd 0.135%
mother_daughter 0.337%
pamphlet 0.561%
stdhd set:
blue_sky 0.408%
city 0.455%
also saw sunflower goes down by -0.469%.
Change-Id: I3fcbba669e56dab779857a8126a91b926e899cb5
the one from gtest in this case: testing::internal::Random.
this will make the tests deterministic between platforms. addresses
issue #568.
Change-Id: I5a8a92f5c33f52cb0a219c1dd3d02335acbbf163
Start grouping data per-plane, as part of refactoring to support
additional planes, and chroma planes with other-than 4:2:0
subsampling.
Change-Id: Idb76a0e23ab239180c818025bae1f36f1608bb23
Inside decode_sb_4x4 it should be
"get_tx_type_4x4(mb, y_idx * y_size + x_idx)"
but it was
"get_tx_type_4x4(mb, y_idx * (2 * y_size) + x_idx)".
Also making code of decode_sb_4x4, decode_sb_8x8, and decode_sb_16x16
formatted in the same way.
Change-Id: I15c7bef4fb575f7e9da19f953912324cb35d24dd
This function expects real Q values as inputs
not index values.
The use-age her impacts the Q chosen for force key
frames. Though this is a bug fix I have not yet verified
whether following the bug fix the q multiplier value used is
correct.
Change-Id: I49f6da894d90baeb1e86c820c335f02dc80d3b66
This code was only called in the BPRED case, but had no real special
case associated with it. Made BPRED behave like all other modes. No
bitstream change.
Change-Id: I87ba11fe723928b6314d094979011228d5ba006f
Took vp9_setup_scale_factors_for_frame() out from
vp9_setup_interp_filters(), so that it is only called once per
frame instead of per macroblock. Decoder tests showed a 1.5%
performance gain.
Change-Id: I770cb09eb2140ab85132f82aed388ac0bdd3a0aa
General code cleanup in loopfilter code. Modification of setup_frame_size,
so now VP9_COMMON is modified in one place after all width/height checks
passed.
Change-Id: Iedf32df43a912d7aae788ed276ac6c429973f6fe
Rename the file and clean up includes. In the future we would like to
pattern match the files which need additional compiler flags.
Change-Id: I2c76256467f392a78dd4ccc71e6e0a580e158e56
Adding decode_sb_8x8 and decode_sb_4x4 with common code for superblock
decoding. Renaming decode_superblock32 to decode_sb32 and
decode_superblock64 to decode_sb64.
Change-Id: Id006d7e398b9bfa3acec4326e1e0c537ebfefdd3
Using clamp and MIN/MAX functions instead of plain C code. Lower case
variable names. Removing redundant parenthesis.
Change-Id: Ibf7cc5fbe4fbdb5029049a599af71534176e6f42
Uncommenting Track elements related to BlockAdditional and adding
the new AlphaMode element as specified in the matroska spec here:
http://matroska.org/technical/specs/index.html#AlphaMode
Change-Id: I87895931e8885e4832efa74776ab1bea91a634e2
We used to calculate SSIM only over the postproc buffer, whereas we
calculate PSNR for both. Compared to postproc-SSIM, this is about 0.3%
higher for derf, 1.4% lower for hd and 0.5% lower for stdhd, although
it is highly variable on a per-clip basis.
Change-Id: I8dd491f0f5b4201dedfb15d288c854d5d4caa10f
The patch adds the flexibility to use standard EOB based coding
on smaller block sizes and nzc based coding on larger blocksizes.
The tx-sizes that use nzc based coding and those that use EOB based
coding are controlled by a function get_nzc_used().
By default, this function uses nzc based coding for 16x16 and 32x32
transform blocks, which seem to bridge the performance gap
substantially.
All sets are now lower by 0.5% to 0.7%, as opposed to ~1.8% before.
Change-Id: I06abed3df57b52d241ea1f51b0d571c71e38fd0b
This threshold effectively limits the amount of motion
from one end of a GF/ARF group to the other.
This patch makes the threshold depend on image size.
Change-Id: Id45d1d7bced815f86ddd037be53164894b00b82f
Almost all arguments for vp9_build_inter32x32_predictors_sb and
vp9_build_inter64x64_predictors_sb can be deduced from the first macroblock
argument.
Change-Id: I5d477a607586d05698d5b3b9b9bc03891dd3fe83
Extracting setup_frame_size and update_frame_context functions. Introducing
vp9_read_prob function as shortcut for (vp9_prob)vp9_read_literal(r, 8).
Change-Id: Ia5c68fd725b2d1b9c5eb20f69cacb62361b5a3dd
Wrote sse2 version of vp9_short_idct_32x32 function. Compared
to c version, the sse2 version is 5X faster.
Change-Id: I071ab7378358346ab4d9c6e2980f713c3c209864
Pick up VP8 encryption, quantization changes, and some fixes to vpxenc
Conflicts:
test/decode_test_driver.cc
test/decode_test_driver.h
test/encode_test_driver.cc
vp8/vp8cx.mk
vpxdec.c
vpxenc.c
Change-Id: I9fbcc64808ead47e22f1f22501965cc7f0c4791c
This gains about 0.2% on derf, 0.1% on hd and 0.4% on stdhd. I can put
this under an experimental flag if wanted, just trying to get my patch
queue in shape.
Change-Id: Ibe1a30fe0e0b07bec4802e0f3ff0ba22e505f576
Adds an experiment to use a weighted prediction of two INTER
predictors, where the weight is one of (1/4, 3/4), (3/8, 5/8),
(1/2, 1/2), (5/8, 3/8) or (3/4, 1/4), and is chosen implicitly
based on consistency of the predictors to the already
reconstructed pixels to the top and left of the current macroblock
or superblock.
Currently the weighting is not applied to SPLITMV modes, which
default to the usual (1/2, 1/2) weighting. However the code is in
place controlled by a macro. The same weighting is used for Y and
UV components, where the weight is derived from analyzing the Y
component only.
Results (over compound inter-intra experiment)
derf: +0.18%
yt: +0.34%
hd: +0.49%
stdhd: +0.23%
The experiment suggests bigger benefit for explicitly signaled weights.
Change-Id: I5438539ff4485c5752874cd1eb078ff14bf5235a
These are mostly just for experimental purposes. I saw small gains (in
the 0.1% range) when playing with this on derf.
Change-Id: Ib21eed477bbb46bddcd73b21c5c708a5b46abedc
Now that the first AC coefficient in both directions use the same DC
as their context, there no longer is a purpose in letting both have
their own band. Merging these two bands allows us to split bands for
some of the very high-frequency AC bands.
In addition, I'm redoing the banding for the 1D-ADST col/row scans. I
don't think the old banding made any sense at all (it merged the last
coefficient of the first row/col in the same band as the first two of
the second row/col), which was clearly an oversight from the band being
applied in scan-order (rather than in their actual position). Now,
coefficients at the same position will be in the same band, regardless
what scan order is used. I think this makes most sense for the purpose
of banding, which is basically "predict energy for this coefficient
depending on the energy of context coefficients" (i.e. pt).
After full re-training, together with previous patch, derf gains about
1.2-1.3%, and hd/stdhd gain about 0.9-1.0%.
Change-Id: I7a0cc12ba724e88b278034113cb4adaaebf87e0c
Pearson correlation for above or left is significantly higher than for
previous-in-scan-order (absolute values depend on position in scan, but
in general, we gain about 0.1-0.2 by using either above or left; using
both basically just makes this even better). For eob branch skipping,
we continue to use the previous token in scan order.
This helps about 0.9% on derf after re-training on a limited data set.
Full re-training and results on larger-resolution clips are pending.
Note that this commit breaks trellis, so we can probably get further
gains out of it by fixing trellis at some later point.
Change-Id: Iead68e296fc3a105cca746b5e3da9555d6010cfe
Reoptimizes the 8-tap smooth filter.
Results:
derf: +0.101%
yt: +0.157%
hd: +0.791%
stdhd: +0.264%
The next step will be to reoptimize the other two filters.
Change-Id: I3d256a510ad9c7c30c33fae4a70fb43dfc708ed0
Lower case variable names, declaration and initialization on the same line,
removing redundant casts to double.
Change-Id: I7ea3905bed827aa6faac11a78401b85e448b57f9
Lower case variable names, removing redundant variables, declaration and
initialization on the same line.
Change-Id: Ie0c6c95b14103990eb6a9d7784f8259c662e1251
Moving code from vp9_decode_frame function into setup_loopfilter and
setup_segmentation functions. A little bit of cleanup.
Change-Id: I2cce1813e4d7aeec701ccf752bf57e3bdd41b51c
Adds a per-frame, strength adjustable, in loop deringing filter. Uses
the existing vp9_post_proc_down_and_across 5 tap thresholded blur
code, with a brute force search for the threshold.
Results almost strictly positive on the YT HD set, either having no
effect or helping PSNR in the range of 1-3% (overall average 0.8%).
Results more mixed for the CIF set, (-0.5 min, 1.4 max, 0.1 avg).
This has an almost strictly negative impact to SSIM, so examining a
different filter or a more balanced search heuristic is in order.
Other test set results pending.
Change-Id: I5ca6ee8fe292dfa3f2eab7f65332423fa1710b58
Replaces the default tables for single coefficient magnitudes with
those obtained from an appropriate distribution. The EOB node
is left unchanged. The model is represeted as a 256-size codebook
where the index corresponds to the probability of the Zero or the
One node. Two variations are implemented corresponding to whether
the Zero node or the One-node is used as the peg. The main advantage
is that the default prob tables will become considerably smaller and
manageable. Besides there is substantially less risk of over-fitting
for a training set.
Various distributions are tried and the one that gives the best
results is the family of Generalized Gaussian distributions with
shape parameter 0.75. The results are within about 0.2% of fully
trained tables for the Zero peg variant, and within 0.1% of the
One peg variant.
The forward updates are optionally (controlled by a macro)
model-based, i.e. restricted to only convey probabilities from the
codebook. Backward updates can also be optionally (controlled by
another macro) model-based, but is turned off by default. Currently
model-based forward updates work about the same as unconstrained
updates, but there is a drop in performance with backward-updates
being model based.
The model based approach also allows the probabilities for the key
frames to be adjusted from the defaults based on the base_qindex of
the frame. Currently the adjustment function is a placeholder that
adjusts the prob of EOB and Zero node from the nominal one at higher
quality (lower qindex) or lower quality (higher qindex) ends of the
range. The rest of the probabilities are then derived based on the
model from the adjusted prob of zero.
Change-Id: Iae050f3cbcc6d8b3f204e8dc395ae47b3b2192c9
Lower case variable names, code simplification by using already defined
clamp and read_le16 functions.
Change-Id: I8fd544365bd8d1daed86d7b2ae0843e4ef80df08
Changing 0x00 ('') fourcc byte to 0x30 ('0'). For VP8 from
0x00385056 to 0x30385056, for VP9 from 0x00395056 to 0x30395056.
Change-Id: I26b1b603c20dd41f7aeabf8cd7893dfd5b1c8b59
As things stand the zero bin mode boost is hurting somewhat.
In part this seems to be because the boost applied as is
interferes with the rd mode selection loop.
Average gains (derf 0.072, yt 0.243, ythd 0.179 std-hd 0.212%)
Change-Id: Icaecea3908d9a7352370e49b8fa822f2c2c49dc1
Wrote sse2 version of vp9_short_idct10_16x16 function. Compared
to c version, the sse2 version is 2.3X faster.
Change-Id: I314c4f09369648721798321eeed6f58e38857f26
Making consistent initialization of mb_to_{top,botton,left,right}_edge
variables after set_mb_row & set_mb_col calls. A little bit of code cleanup
additionally.
Change-Id: I245bfe32c5701e9836956dc25cf8c770d109cbc1
Wrote sse2 version of vp9_short_idct16x16 function. Compared to c
version, the sse2 version is over 2.5X faster.
Change-Id: I38536e2b846427a2cc5c5423aaf305fd0e605d61
Renaming Width to width, Height to height and Version to version in
several structs and function signatures.
Change-Id: I084c3f7e747cb2ce3345aff27a3dff9b13a87543
Wrote sse2 functions of vp9_short_idct8x8 and vp9_short_idct10_8x8.
Compared to c version, the sse2 version is 2X faster. The decoder
test didn't show noticeable gain since 8x8 idct doesn't take much
of decoding time (less than 1% in my test).
Change-Id: I56313e18cd481700b3b52c4eda5ca204ca6365f3
If the intended display size is different than the size the frame is
coded at, then send that size explicitly in the bitstream. Adds a new
bit to the frame header to indicate whether the extra size fields
are present.
Change-Id: I525c66f22d207efaf1e5f903c6a2a91b80245854
Adjust the filter length and strength for each
ARF group based on a measure of difficulty (the boost)
and the active q range.
Remove lower limit on RDMULT value.
Average gains on the different sets in range 0.4%-0.9%.
However the ARNR changes give a very big boost on a
few clips.
Eg. Soccer ~5%, in derf set and Cyclist ~ 10% in the std-hd set
Change-Id: I2078d78798e27ad2bcc2b32d703ea37b67412ec4
This fix resolves some of the mismatch issues being seen
recently. While this is the right thing to do when tiling
is used for this experiment, it is not the underlying cause
of the the mismatches.
Something else is causing writing outside of the allowable
frame area in the encoder leading to this mismatch.
Change-Id: If52c6f67555aa18ab8762865384e323b47237277
These variables are unused, and are subject to overflowing, causing
assertions when built with -ftrapv.
Change-Id: Ia00a3201af309906c05bcd4b23a643925ed6ea86
If the second reference is better than the first in the long term,
it was possible to try to take the fractional exponent of a
negative number, giving an undefined result.
Change-Id: I1dd08286747ceae960eb03bb5d98a383cc9d253b
Moving identical code to separate functions, variable declaration and
initialization on the same line.
Change-Id: Ifa6474a64189f9d8051e88e19850453b0227752c
and denoising.c
Adding -Wshadow to CFLAGS generated a bunch of warnings. This patch
removes these warnings.
Change-Id: I434a9f4bfac9ad4ab7d2a67a35ef21e6636280da
ratectrl.c and quantize.c
Adding -Wshadow to CFLAGS generated a bunch of warnings. This patch
removes these warnings.
Change-Id: I8c8faa9fde57c1c49662d332a90bc8d9a0f4a2ce
Adding -Wshadow to CFLAGS generated a bunch of warnings. This commit
is based on work already done by jzern.
Change-Id: Iefc08a7ab601c4d1b507f039577433bfb1c6cc9d
Updates the YV12_BUFFER_CONFIG structure to be crop-aware. The
exiting width/height parameters are left unchanged, storing the
width and height algined to a 16 byte boundary. The cropped
dimensions are added as new fields.
This fixes a nasty visual pulse when switching between scaled and
unscaled frame dimensions due to a mismatch between the scaling
ratio and the 16-byte aligned sizes.
Change-Id: Id4a3f6aea6b9b9ae38bdfa1b87b7eb2cfcdd57b6
This is like VP8_COPY_REFERENCE, but returns a pointer to the reference
frame rather than a copy of it. This is useful when the application
doesn't know what the size of the reference is, as is the case when
scaling is in effect.
Change-Id: I63667109f65510364d0e397ebe56217140772085
Enable entropy coding of motion vectors up to +/-2048. Also
extend the motion search range accordingly.
Change-Id: Iac2bb015e8934521cef83a19edbe967d9f097436
The superframe index marker byte carries data in the lower 5 bits. Only the
upper 3 should be used as part of the mask to detect it. By masking with
0xf0, the previous code was incorrect for frames over 65k bytes.
Change-Id: I6248889f5af227457f359a56b2348ef6db87a3b4
If a superframe (ARF) is generated while flushing the lagged frames
at the end of the clip, the buffer pointer wasn't being properly
updated to account for the size of the index, causing the next
frame to overwrite the index on the previous frame.
Change-Id: Ib158cc8e4183d663bdfb9ba002dd4c98916abdc9
If the bool-coded partition naturally ends in a byte that matches the
superframe index marker, it could lead to a parse error. This commit
ensures that if such a marker is seen, it is padded out with an
additional zero byte to disambiguate it.
Change-Id: Id977de05745b6fa9ef08afb71e210a2a3ecca02e
When coding the frame that corresponds to the midpoint frame
defining an ARF, do not update the last reference frame buffer.
Previously this buffer was updated meaning that when coding the next
ARF all the reference buffers were the same (or nearly so).
Turning the update off means that the frame before is still available
as an alternative predictor and for use in compound prediction.
Also fixed inconsistency in test for mismatch (patch from JK).
Net average gains (derf 0.049, yt 0.163, yt-hd 0.207, std-hd 0.286)
Change-Id: Ifee21da21ccbb1648ac2eafe890d3ce60562c7bc
Removing redundant code, introducing new functions for better
decomposition, adding 'clamp' function to vp9_common.h.
Change-Id: Ic3b8ca13bbc38f60f0c9c43910b5802005e31aaf
This fixes a potential crash with VP8 streams that have an alt-ref on
the first frame, as well as potentially scaling the output in cases
where that wasn't desired.
Change-Id: I1fd74b5ab43329fbbffecb004dfd44de34c4dc22
This patch puts in an adjustment to the maximum gf/arf
interval based on the active q range. It sets a fixed
baseline maximum of 16 but can drop this down to 12 at
lower q. This required some re-ordering in the first pass
code to insure we have a Q range estimate before defining
the first gf sequence.
The main gains seed are int he STD hd set on 50fps clips
where previously the interval could rise as high as 25.
On the std hd clip the gains are around 2.8% with limit set
to 300 frames.
When combined with the one shot rate control flags we get
combined of:
derf 1.55% (limit300), yt 7.25%, hd 5.17% std-hd 5.84% (limit300)
Change-Id: Ib380d51354511f2ff0f171a8df4e74291c0421f9
Remove the temporary branch count arrays and build the adapted probabilities
while walking the tree. Gives an additional 1.5% or so on CIF.
Change-Id: I875d61e5e0ec778e5d2f7f9d0837b989a91cf3a3
The previous implementation visited each node in the tree multiple times
because it used each symbol's encoding to revisit the branches taken and
increment its count. Instead, we can traverse the tree depth first and
calculate the probabilities and branch counts as we walk back up. The
complexity goes from somewhere between O(nlogn) and O(n^2) (depending on
how balanced the tree is) to O(n).
Only tested one clip (256kbps, CIF), saw 13% decoding perf improvement.
Note that this optimization should port trivially to VP8 as well. In VP8,
the decoder doesn't use this function, but it does routinely show up
on the profile for realtime encoding.
Change-Id: I4f2848e4f41dc9a7694f73f3e75034bce08d1b12
Adds probability updates for extra bits for the nzcs, code for
getting nzc stats, plus some minor cleanups and fixes.
Change-Id: If2814e7f04fb52f5025ad9f400f3e6c50a00b543
Added SSE2 idct4_1d which is called by vp9_short_iht4x4. Also,
modified the parameter type passed to vp9_short_iht functions to
make it work with rtcd prototype.
Change-Id: I81ba7cb4db6738f1923383b52a06deb760923ffe
Increase the motion search range by 4x. Change MV_CLASS tree of the
entropy coding to allow two additional mv classes to cover the
extended motion vector limit. The codec determines the effective
motion search range conditioned on the actual frame dimension.
It provides coding gains:
stdhd 0.39%
yt 0.56%
hd 0.47%
Major coding performance gains are packed in several sequences with
intense motion activities, e.g., ped_1080p gains 7% at high bit-rates,
and on average 3%.
TODO: Need to further tune the rate control and motion search units.
Change-Id: Ib842540a6796fbee5a797809433ef6a477c6d78d
This also changes the RD search to take account of the correct block
index when searching (this is required for ADST positioning to work
correctly in combination with tx_select).
Change-Id: Ie50d05b3a024a64ecd0b376887aa38ac5f7b6af6
Yaowu found this function had a compiling issue with MSVC because
of using _mm_storel_pi((__m64 *)(dest + 0 * stride), (__m128)p0).
To be safe, changed back to use integer store instruction.
Also, for some build, diff could not always be 16-byte aligned.
Changed that in the code.
Change-Id: I9995e5446af15dad18f3c5c0bad1ae68abef6c0d
This patch revamps the entropy coding of coefficients to code first
a non-zero count per coded block and correspondingly remove the EOB
token from the token set.
STATUS:
Main encode/decode code achieving encode/decode sync - done.
Forward and backward probability updates to the nzcs - done.
Rd costing updates for nzcs - done.
Note: The dynamic progrmaming apporach used in trellis quantization
is not exactly compatible with nzcs. A suboptimal approach has been
used instead where branch costs are updated to account for changes
in the nzcs.
TODO:
Training the default probs/counts for nzcs
Change-Id: I951bc1e22f47885077a7453a09b0493daa77883d
Added a variant of the one shot maxQ flag
for two pass that forces a fixed Q for the
normal inter frames. Disabled by default.
Also small adjustment to the Bits per MB
estimation.
Change-Id: I87efdfb2d094fe1340ca9ddae37470d7b278c8b8
Improved coding performance made this test fail. Adjust the threshold
so that it passes again. A more stable metric is an open TODO.
Change-Id: I56e18749ced48123ee2488888a3eed631759912b
A 'superframe' is a group of frames that share the same PTS, but have a
defined decoding order. This commit adds the ability to append an index
to such a group of frames, allowing for random access to the constituent
frames. This could be useful for frame-level parallelism or partial
decoding in a multilayer scenario.
Decoding the stream serially without such an index should work as a
fallback, and VP9/TestSuperframeIndexIsOptional verifies that.
Change-Id: Idff83b7560e1a7077d8fb067bfbc45b567e78b1c
Writing all #define guards using the same style. Inlining macro
VP8DX_BOOL_DECODER_FILL into vp8dx_bool_decoder_fill. Removing unnecessary
includes.
Change-Id: I483fa979ab34008bf7835b5f34c6471c44daf956
Split macroblock and superblock tokenization and detokenization
functions and coefficient-related data structs so that the bitstream
layout and related code of superblock coefficients looks less like it's
a hack to fit macroblocks in superblocks.
In addition, unify chroma transform size selection from luma transform
size (i.e. always use the same size, as long as it fits the predictor);
in practice, this means 32x32 and 64x64 superblocks using the 16x16 luma
transform will now use the 16x16 (instead of the 8x8) chroma transform,
and 64x64 superblocks using the 32x32 luma transform will now use the
32x32 (instead of the 16x16) chroma transform.
Lastly, add a trellis optimize function for 32x32 transform blocks.
HD gains about 0.3%, STDHD about 0.15% and derf about 0.1%. There's
a few negative points here and there that I might want to analyze
a little closer.
Change-Id: Ibad7c3ddfe1acfc52771dfc27c03e9783e054430
Adds an option, --scale, that will rescale any frames produced by
the decoder that don't match the resolution of the first frame to
that resolution. This is useful for playback of files that use
spatial resampling.
Change-Id: I867adc650d535df7ec5b107549359712ea3aaaa0
Fixes a rollover of the cx_time variable for encodes that take
over ~4200 seconds. Also enable the time estimate in first pass.
Change-Id: Ib5a98ee71bccd79a804d709cec7260651d0b7141
Scales the input of the encoder using libyuv's "box filter". Each stream
may have a different width and height specified. If the width (or
height) parameter is missing (or is explicitly set to 0) then the value
will be calculated based on the specified height (or width) and the
input file's dimensions, preserving its aspect ratio. Leaving the height
unspecified behaves similarly.
Change-Id: I700ef89ce54fb87588420a71c39c0e3e73b1a40e
Allows the user to specify whether decode errors should be fatal or not.
Also makes mismatches optionally fatal.
Change-Id: I58cff4a82f3d42f5653b91cf348a7f669377e632
Make the progress line more useful by providing per-frame updates of
processing frame rate and estimated time remaining.
Fixes issue #534.
Change-Id: Ic91551878ff4b2f5db1cedaafb588add220cfa52
Fixed a couple of variable/function definitions, as well as header
handling to support 16K sequence coding at high bit-rates.
The width and height are each specified by two bytes in the header.
Use an extra byte to explicitly indicate the scaling factors in
both directions, each ranging from 0 to 15.
Tested coding up to 16400x16400 dimension.
Change-Id: Ibc2225c6036620270f2c0cf5172d1760aaec10ec
Remove dependency of this function on asm_offsets. ssse3/sse4 next.
Change quant_shift calculation so it be done using SIMD. Pre-calculate
as much as possible to simplify EOB selection.
Take advantage of qcoeff being zero'd by tying the if statements
together.
Speed parity with previous implementation with gcc x86_64 linux
Change-Id: Ife97556a1eca3a74b09def1a3d04084974dff1fb
Simplified idct32x32 calculation when there are only 10 or less
non-zero coefficients in 32x32 block. This helps the decoder
performance.
Change-Id: If7f8893d27b64a9892b4b2621a37fdf4ac0c2a6d
The ABOVESPREFMV experiment uses four pixels to the left of the
current block, which don't exist for the left-most column.
Change-Id: I4cf0b42ae8f54c0b3e7b1ed8755704b74fafc39c
Removing redundant variables, using x *= y instead x = x * y, moving
variable declarations into inner blocks.
Change-Id: I884f95c755f55d51b7c1c6585f10296919063e41
The width and height stored in the reference frames are padded out to
a multiple of 16. The Width and Height variables in common are the
displayed size, which may be smaller. The incorrect comparison was
causing scaling related code to be called when it shouldn't have
been. A notable case where this happens is 1080p, since 1088 != 1080.
Change-Id: I55f743eeeeaefbf2e777e193bc9a77ff726e16b5
sse4_1 code used uint16_t for returning sad, but that
won't work for 32x32 or 64x64. This code fixes the
assembly for those and also reenables sse4_1 on linux
Change-Id: I5ce7288d581db870a148e5f7c5092826f59edd81
Fixing code style, using array lookup instead of switch statements for
forward hybrid transforms (in the same way as for their inverses).
Consistent usage of ROUND_POWER_OF_TWO macro in appropriate places.
Change-Id: I0d3822ae11f928905fdbfbe4158f91d97c71015f
Fixes a rollover of the cx_time variable for encodes that take
over ~4200 seconds. Also enable the time estimate in first pass.
Change-Id: Ib5a98ee71bccd79a804d709cec7260651d0b7141
Since the 8-tap lowpass filter is non-interpolating, the results are
different between applying it at whole-pel values and not. This
means that 1D-only versions are requried to be implemented, as
opposed to being an optimization of the 2D case. Calling the 2D
filter instead of the horizontal-only filter is not equivalent
in this case. Update the test to pass invalid filters to the
unused stage of the 1D-only calls, to verify they're unused.
Change-Id: Idc1c490f059adadd4cc80dbe770c1ccefe628b0a
Updates the convolve test to verify that all filters match the
reference implementation. This verifies commit 30f866f, which
fixed some problems with the SSE3 version of the filters for
the vp9_sub_pel_filters_8s and vp9_sub_pel_filters_8lp banks
due to overflow and order of operations.
Change-Id: I6b5fe1a41bc20062e2e64633b1355ae58c9c592c
This function was part of an optimization used in VP8 that required
caching two macroblocks. This is unused in VP9, and might not
survive refactoring to support superblocks, so removing it for now.
Change-Id: I744e585206ccc1ef9a402665c33863fc9fb46f0d
Adds an option, --scale, that will rescale any frames produced by
the decoder that don't match the resolution of the first frame to
that resolution. This is useful for playback of files that use
spatial resampling.
Change-Id: I867adc650d535df7ec5b107549359712ea3aaaa0
Scales the input of the encoder using libyuv's "box filter". Each stream
may have a different width and height specified. If the width (or
height) parameter is missing (or is explicitly set to 0) then the value
will be calculated based on the specified height (or width) and the
input file's dimensions, preserving its aspect ratio. Leaving the height
unspecified behaves similarly.
Change-Id: Ic7026810b13be030826be80dc6f7fc4aaf0c35d0
This patch makes the encoder's use of ref_frame_map and active_ref_idx
consistent with the decoder. ref_frame_map[] maps a reference buffer
index to its actual location in the yv12_fb array, since many
references may share an underlying buffer. active_ref_idx[] mirrors
cpi->{lst,gld,alt}_fb_idx, holding the active references in each
slot.
This also fixes a bug in setup_buffer_inter() where the incorrect
reference was used to populate the scaling factors.
Change-Id: Id3728f6d77cffcd27c248903bf51f9c3e594287e
Fixes a bug in vp9_set_internal_size() that prevented returning to
the unscaled state. Updated the ResizeInternalTest to scale both
down and up. Added a check that all frames are within 2.5% of the
quality of the initial keyframe.
Change-Id: I3b7ef17cdac144ed05b9148dce6badfa75cff5c8
This avoids duplicating all the filters twice. Includes fixups to the
convolve routines and associated tests to make this work.
Change-Id: I922f86021594e55072ddb63b42b2313605db6e00
This patch extends the previous support for using references of a
different resolution in ZEROMV mode to all inter prediction modes.
Subpixel based best-mv scoring is disabled when the reference frame
differs in resolution from the current frame.
Change-Id: Id4dc3e5e6692de98d9857fd56bfad3ac57e944ac
This commit updates the 4x4 prediction to consistently use the
build_2x1_inter_predictor() method. That function is updated to
calculate the scale offset, rather than relying on the caller
to calculate it. In the case that the 2x1 prediction can not
be used, the scale offset is recalculated for each 1x1 block.
The idea here is that the offsets are calculated before each
call to vp9_build_scaled_inter_predictor().
Change-Id: I0ac3343dd54e2846efa3c4195fcd328b709ca04d
This patch allows coding frames using references of different
resolution, in ZEROMV mode. For compound prediction, either
reference may be scaled.
To test, I use the resize_test and enable WRITE_RECON_BUFFER
in vp9_onyxd_if.c. It's also useful to apply this patch to
test/i420_video_source.h:
--- a/test/i420_video_source.h
+++ b/test/i420_video_source.h
@@ -93,6 +93,7 @@ class I420VideoSource : public VideoSource {
virtual void FillFrame() {
// Read a frame from input_file.
+ if (frame_ != 3)
if (fread(img_->img_data, raw_sz_, 1, input_file_) == 0) {
limit_ = frame_;
}
This forces the frame that the resolution changes on to be coded
with no motion, only scaling, and improves the quality of the
result.
Change-Id: I1ee75d19a437ff801192f767fd02a36bcbd1d496
Wrote SSE2 version of vp9_dc_only_idct_add_c function. In order to
improve performance, clipped the absolute diff values to [0, 255].
This allowed us to keep the additions/subtractions in 8 bits.
Test showed an over 2% decoder performance increase.
Change-Id: Ie1a236d23d207e4ffcd1fc9f3d77462a9c7fe09d
Reduce dependency on offsets file by using intrinsics. Disassembly shows
improvements over previous assembly specifically in register management,
preloading, and {pro,epi}log. Speed change is within margin of error.
Change-Id: I8131b4b4d62bc092407fe847bfaa8f2c0e1384ff
Ensure that all inter prediction goes through a common code path
that takes scaling into account. Removes a bunch of duplicate
1st/2nd predictor code. Also introduces a 16x8 mode for 8x8
MVs, similar to the 8x4 trick we were doing before. This has an
unexpected effect with EIGHTTAP_SMOOTH, so it's disabled in that
case for now.
Change-Id: Ia053e823a8bc616a988a0af30452e1e75a739cba
Also
1. Removed the test code for fDCT from the iDCT test.
2. changed the criteria of round trip error to be below 1/block, this
is quite strict comparing to smaller transforms when size differences
are accounted for.
Change-Id: Idb46a6380b04c93fc8e2845c75f5a850366b0090
The commit improves the 32x32 forward dct implementation:
1. change to use same constants and rounding as other forward dcts
2. select rounding to specifically minimize the roundtrip error, which
improved average 19/block to .77/block using 100000 random input.
Test showed a small but consistent gain on all test sets, about .15%
Change-Id: If0afd6a71880a522f60c1c234be0462092c2eb53
Removing switch statements for inverse hybrid transforms. Making code style
consistent for all similar transform implementations. Renaming shortpitch
and short_pitch variables to half_pitch.
Change-Id: I875f7a82aae4e8063a58777bf1cc3f1e67b48582
Increase the first stage dynamic range by 4 times, and reduce it
back with proper rounding before applying the second stage. Hence
it still fits in the given dynamic range and slightly improves
the key frame coding performance.
Change-Id: Ia4c5907446f20a95dc3de079c314b3ad1221d8aa
Rebased.
Remove the old matrix multiplication transform computation. The 16x16
ADST/DCT can be switched on/off and evaluated by setting ACTIVE_HT16
300/0 in vp9/common/vp9_blockd.h.
Change-Id: Icab2dbd18538987e1dc4e88c45abfc4cfc6e133f
Some minor refactoring code relating to estimates of
bits per MB at a given Q and estimating the allowed Q range.
Most of the changes here were included in a previous commit.
This commit seeks to separate out the refactoring from more
the material changes.
Two #define control flags have been added for experimentation.
ONE_SHOT_Q_ESTIMATE force the two pass encoder to
use its initial Q range estimate for the whole clip even if this results
in a miss on the target data rate. In effect this tightens the Q range
seen at the expense of rate control accuracy.
DISABLE_RC_LONG_TERM_MEM is a related flag that disables the
long term memory in the rate control. Local adjustments are still
made to try and better hit the rate target on a per frame basis but
the impact of rate control misses is not propagated to the remainder
of the clip. This means that for example an overshoot early on will not
cause frames later in the clip to be starved of bits. Again the result
of this relaxation amy be less rate control accuracy especially on short
clips.
The flags are disabled by default for now.
Change-Id: I7482f980146d8ea033b5d50cc689f772e4bd119e
This commit added pre/post scaling for first half of fDCT16x16 to
reduce error, by simulation of 100,000 blocks for random inputs,
the average sse reduced from 2.1/block to 0.0498/block.
also enabled tests for 16x16 fDCT and iDCT
Change-Id: Id2a95f0464c6dd4118797d456237ae90274c0f02
This patch alters the balance of context between the
coefficient bands (reflecting the position of coefficients
within a transform blocks) and the energy of the previous
token (or tokens) within a block.
In this case the number of coefficient bands is reduced
but more previous token energy bands are supported.
Some initial rebalancing of the default tables has been
by running multiple derf clips at multiple data rates using
the ENTOPY_STATS macro. Further balancing needs to be
done using larger image formatsd especially in regard to
the bigger transform sizes which are not as well represented
in encodings of smaller image formats.
Change-Id: If9736e95c391e711b04aef6393d26f60f36e1f8a
The commit added a final rounding choice for 8x8 forward dct to get
rid of a sign bias at DC position and improve the accuracry in term
of round trip error for 8x8 fDCT/iDCT.
This commit also enabled forward 8x8 dct test.
Change-Id: Ib67f99b0a24d513e230c7812bc04569d472fdc50
The issue that potentially broke the encoding process was due to the fact
that the length of token link is calculated from the total number of tokens
coded, while it is possible, in high bit-rate setting, this length is
greater than the buffer length initially assigned to the cpi->tok.
This patch increases the initially allocated buffer length assigned to
cpi->tok from
(mb_rows * mb_cols * 24 * 16) to (mb_rows * mb_cols * (1 + 24 * 16)).
It resolves the buffer overflow problem.
Change-Id: I8661a8d39ea0a3c24303e3f71a170787a1d5b1df
Removing redundant 'extern' keywords and parentheses, fixing indentation,
making variable names lower case, using short expressions x *= c
instead of x = x * c, minor code simplifications.
Change-Id: If6a25fcf306d1db26e90d27e3c24a32735c607de
1. changed 4x4 test name to Vp9Fdct4x4Test to be consistent
2. remove forward 8x8 dct test code from idct8x8_test.cc
3. temporarily disable other forward dct tests to allow fdct work in
progress
Change-Id: I566aeed9c7c34da5a206190aa7d0e847a4008b36
The over quant code was added in VP8 post
bitstream freeze to allow compression to lower
data rates
In VP9 the real qualtizer range has been greatly
extended anyway.
Change-Id: I5d384fa5e9a83ef75a3df34ee30627bd21901526
This patch includes 4x4, 8x8, and 16x16 forward butterfly ADST/DCT
hybrid transform. The kernel of 4x4 ADST is sin((2k+1)*(n+1)/(2N+1)).
The kernel of 8x8/16x16 ADST is of the form sin((2k+1)*(2n+1)/4N).
Change-Id: I8f1ab3843ce32eb287ab766f92e0611e1c5cb4c1
Allows the user to specify whether decode errors should be fatal or not.
Also makes mismatches optionally fatal.
Change-Id: I58cff4a82f3d42f5653b91cf348a7f669377e632
Removing redundant 'extern' keyword from function declarations and making
function arguments lower case.
Change-Id: Idae9a2183b067f2b6c85ad84738d275e8bbff9d9
Refactors the switchable filter search in the rd loop to
improve encode speed.
Uses a piecewise approximation to a closed form expression to estimate
rd cost for a Laplacian source with a given variance and quantization
step-size.
About 40% encode time reduction is achieved.
Results (on a feb 12 baseline) show a slight drop:
derf: -0.019%
yt: +0.010%
std-hd: -0.162%
hd: -0.050%
Change-Id: Ie861badf5bba1e3b1052e29a0ef1b7e256edbcd0
The issue that potentially broke the encoding process was due to the fact
that the length of token link is calculated from the total number of tokens
coded, while it is possible, in high bit-rate setting, this length is
greater than the buffer length initially assigned to the cpi->tok.
This patch increases the initially allocated buffer length assigned to
cpi->tok from
(mb_rows * mb_cols * 24 * 16) to (mb_rows * mb_cols * (1 + 24 * 16)).
It resolves the buffer overflow problem.
Change-Id: I8661a8d39ea0a3c24303e3f71a170787a1d5b1df
- Using multiplication and shifting instead of division in
intra prediction.
- Maximum absolute difference is 1 for division statements
in d45, d27, d63 prediction modes. However, errors can
cumulate for large block sizes when using already predicted
values.
- Maximum number of non-matching result values in loops using
division are:
4x4 0/16
8x8 0/64
16x16 10/256
32x32 13/1024
64x64 122/4096
Overall PSNR
derf: 0.005
yt: -0.022
std-hd: 0.021
hd: -0.006
Change-Id: I3979a02eb6351636442c1af1e23d6c4e6ec1d01d
The issue was caused by a out-of-order merge, which leads to wrong
functions are called at lossless mode.
Change-Id: If157729abab62954c729e0377e7f53edb7db22ca
rebased.
This patch includes 16x16 butterfly inverse ADST/DCT hybrid
transform. It uses the variant ADST of kernel
sin((2k+1)*(2n+1)/4N),
which allows a butterfly implementation.
The coding gains as compared to DCT 16x16 are about 0.1% for
both derf and std-hd. It is noteworthy that for std-hd sets
many sequences gains about 0.5%, some 0.2%. There are also few
points that provides -1% to -3% performance. Hence the average
goes to about 0.1%.
Change-Id: Ie80ac84cf403390f6e5d282caa58723739e5ec17
The commit changes the coding mode to lossless whenever the lowest
quantizer is choosen.
As expected, test results showed no difference for cif and std-hd
set where Q0 is rarely used. For yt and yt-hd set, Q0 is used for
a number of clips, where this commit helped a lot in the high end.
Average over all clips in the sets:
yt: 2.391% 1.017% 1.066%
hd: 1.937% .764% .787%
Change-Id: I9fa9df8646fd70cb09ffe9e4202b86b67da16765
The 32x32 value in case of splitmv was uninitialized. this leads to
all kind of erratic behaviour down the line. Also fill in dummy values
for superblocks in keyframes (the values are currently unused, but we
run into integer overflows anyway, which makes detecting bad cases
harder). Lastly, in case we did not find any RD value at all, don't
set tx_diff to INT_MIN, but instead set it to zero (since if we couldn't
find a mode, it's unlikely that any particular transform would have made
that worse or better; rather, it's likely equally bad for all tx_sizes).
Change-Id: If236fd3aa2037e5b398d03f3b1978fbbc5ce740e
This issue breaks the encoding process of the codebase. The effect
emerges only in particular test sequence at certain bit-rates and
frame limits.
Change-Id: I02e080f2a49624eef9a21c424053dc2a1d902452
Since there is no Y2, these values are always zero. This changes the
bitstream results slightly, hence a separate commit.
Change-Id: I2f838f184341868f35113ec77ca89da53c4644e0
These allow sending partial bitstream packets over the network before
encoding a complete frame is completed, thus lowering end-to-end
latency. The tile-rows are not independent.
Change-Id: I99986595cbcbff9153e2a14f49b4aa7dee4768e2
Since addition of the larger-scale transforms (16x16, 32x32), these
don't give a benefit at macroblock-sizes anymore. At superblock-sizes,
2nd-order transform was never used over the larger transforms. Future
work should test whether there is a benefit for that use case.
Change-Id: I90cadfc42befaf201de3eb0c4f7330c56e33330a
This patch abstracts the selection of the coefficient band
context into a function as a precursor to further experiments
with the coefficient context.
It also removes the large per TX size coefficient band structures
and uses a single matrix for all block sizes within the test function.
This may have an impact on quality (results to follow) but is only an
intermediate step in the process of redefining the context. Also the
quality impact will be larger initially because the default tables will
be out of step with the new banding.
In particular the 4x4 will in this case only use 7 bands. If needed we
can add back block size dependency localized within the function, but
this can follow on after the other changes to the definition of the
context.
Change-Id: Id7009c2f4f9bb1d02b861af85fd8223d4285bde5
Reverted part of change
I19981d1ef0b33e4e5732739574f367fe82771a84
That gives rise to an enc/dec mismatch.
As things stand the memsets are still needed.
Change-Id: I9fa076a703909aa0c4da0059ac6ae19aa530db30
This is an initial step to facilitate experimentation
with changes to the prior token context used to code
coefficients to take better account of the energy of
preceding tokens.
This patch merely abstracts the selection of context into
two functions and does not alter the output.
Change-Id: I117fff0b49c61da83aed641e36620442f86def86
1. Added a bit in frame header to to indicate if a frame is encoded
in lossless mode, so decoder does not make the decision based on Q0
2. Minor changes to make sure that lossy coding works same as when
the lossless experiment is not enabled.
3. Renamed function pointers for transforms to be consistent, using
prefix fwd_txm and inv_txm for forward and inverse respectively
To encode in lossless mode, using "--lossless=1 --min-q=0 --max-q=0"
with vpxenc.
Change-Id: Ifae53b26d2ffbe378d707e29d96817b8a5e6c068
Initial ssse3 convolve avg functions and is one step closer
to using x86inc.asm. The decoder performance improved by 8% for
the test clip used. This should be revisited later to see if
averaging outside the loop is better than having many similar
filter functions.
Change-Id: Ice3fafb423b02710b0448ffca18b296bcac649e9
Removal of the NEWCOEFCONTEXT experiment to
reduce code clutter and make it easier to experiment with
some other changes to the coefficient coding context.
Change-Id: Icd17b421384c354df6117cc714747647c5eb7e98
Make the progress line more useful by providing per-frame updates of
processing frame rate and estimated time remaining.
Fixes issue #534.
Change-Id: Ic91551878ff4b2f5db1cedaafb588add220cfa52
A couple of scalar optimizations speeding up quantization by about 1.6x. Overall encoder speedup is around 3%.
Change-Id: I19981d1ef0b33e4e5732739574f367fe82771a84
This is after discussion with the hardware team. Update the unit test
to take these sizes into account. Split out some duplicate code into
a separate file so it can be shared.
Change-Id: I8311d11b0191d8bb37e8eb4ac962beb217e1bff5
Implement convolve8_avg using common functions which are already optimized
instead of using more obscure ones which have only C versions. Encoder
overall speed-up of about 12%.
Change-Id: I8c57aa76936c8a48f22b115f19f61d9f2ae1e4b6
fixed format issues.
Implement the inverse 4x4 ADST using 9 multiplications. For this
particular dimension, the original ADST transform can be
factorized into simpler operations, hence is retained.
Change-Id: Ie5d9749942468df299ab74e90d92cd899569e960
Experimental tweaks to various thresholds to measure
quality / speed trade off.
Add flag that allows static segmentation to be turned off
and disables it unless in the second pass of a two pass
encode.
Change-Id: I219702ffe858412a83db801cbbbd869924b8c61b
A 16 bit overflow condition occurs when using the EIGHTTAP_SMOOTH filters.
(vp9_sub_pel_filters_8lp) Changed the order of the adds to fix this problem.
Also added ssse3 support for 4x4 subpixel filtering.
Change-Id: I475eaadae920794c2de5e01e9735c059a856518e
Replace as_mv.{first, second} with a two element array, so that they
can easily be processed with an index variable.
Change-Id: I1e429155544d2a94a5b72a5b467c53d8b8728190
Also port the 4x4, 16x16, 8x16 and 16x8 versions to x86inc.asm; this
makes them all slightly faster, particularly on x86-64. Remove SSE3
sad16x16 version, since the SSE2 version is now faster.
About 1.5% overall encoding speedup.
Change-Id: Id4011a78cce7839f554b301d0800d5ca021af797
Cache the constant offset in one variable to prevent re-loading that
in each loop iteration, and mark the function as inline so we can use
the fact that the transform size is always known in the caller.
Almost 1% faster encoding overall.
Change-Id: Id78325a60b025057d8f4ecd9003a74086ccbf85a
Pass the current mb row and column around rather than the
recon_yoffset and recon_uvoffset, since those offsets will
change from predictor to predictor, based on the reference
frame selection.
Change-Id: If3f9df059e00f5048ca729d3d083ff428e1859c1
* changes:
Initial support for resolution changes on P-frames
Avoid allocating memory when resizing frames
Adds a test for the VP8E_SET_SCALEMODE control
Allows inter-frames to change resolution. Currently these are
almost equivalent to keyframes, as only intra prediction modes
are allowed, but without the other context resets that occur on
keyframes.
Change-Id: Icd1a2a5af0d9462cc792588427b0a1f5b12e40d3
As long as the new frame is smaller than the size that was originally
allocated, we don't need to free and reallocate the memory allocated.
Instead, do the allocation on the size of the first frame. We could
make this passed in from the application instead, if we wanted to
support external upscaling.
Change-Id: I204d17a130728bbd91155bb4bd863a99bb99b038
Tests that the external interface to set the internal codec scaling
works as expected. Also updates the test to pull the height from
the decoded frame size rather than parsing the keyframe header,
in anticipation of allowing resolution changes on non-keyframes.
Change-Id: I3ed92117d8e5288fbbd1e7b618f2f233d0fe2c17
This commit adds the 8 tap SSSE3 subpixel filters back into the code
underneath the convolve API. The C code is still called for 4x4
blocks, as well as compound prediction modes. This restores the
encode performance to be within about 8% of the baseline.
Change-Id: Ife0d81477075ae33c05b53c65003951efdc8b09c
Tweak to default mode context to account for the fact
that when there are no non zero motion candidates
Nearest is now the preferred mode for coding a 0,0
vector.
Also resolve duplicate function name and typos.
Change-Id: I76802788d46c84e3d1c771be216a537ab7b12817
Refactor the 8x8 inverse hybrid transform. It is now consistent
with the new inverse DCT. Overall performance loss (due to the
use of this variant ADST, and the rounding errors in the butterfly
implementation) for std-hd is -0.02.
Fixed BUILD warning.
Devise a variant of the original ADST, which allows butterfly
computation structure. This new transform has kernel of the
form: sin((2k+1)*(2n+1) / (4N)). One of its butterfly structures
using floating-point multiplications was reported in Z. Wang,
"Fast algorithms for the discrete W transform and for the discrete
Fourier transform", IEEE Trans. on ASSP, 1984.
This patch includes the butterfly implementation of the inverse
ADST/DCT hybrid transform of dimension 8x8.
Change-Id: I3533cb715f749343a80b9087ce34b3e776d1581d
Added switches and code to skip/breakout from
doing SB32 and SB64 tests based on whether
the 16x16 MB tests used split modes. Also to
optionally skip 64x64 if 16x16 was chosen over
32x32.
Impact varies depending on clip from a few %
up to almost 50% on encode speed. Only the
split mode breakout is currently enabled.
Change-Id: Ib5836140b064b350ffa3057778ed2cadcc495cf8
This patch adds column-based tiling. The idea is to make each tile
independently decodable (after reading the common frame header) and
also independendly encodable (minus within-frame cost adjustments in
the RD loop) to speed-up hardware & software en/decoders if they used
multi-threading. Column-based tiling has the added advantage (over
other tiling methods) that it minimizes realtime use-case latency,
since all threads can start encoding data as soon as the first SB-row
worth of data is available to the encoder.
There is some test code that does random tile ordering in the decoder,
to confirm that each tile is indeed independently decodable from other
tiles in the same frame. At tile edges, all contexts assume default
values (i.e. 0, 0 motion vector, no coefficients, DC intra4x4 mode),
and motion vector search and ordering do not cross tiles in the same
frame.
t log
Tile independence is not maintained between frames ATM, i.e. tile 0 of
frame 1 is free to use motion vectors that point into any tile of frame
0. We support 1 (i.e. no tiling), 2 or 4 column-tiles.
The loopfilter crosses tile boundaries. I discussed this briefly with Aki
and he says that's OK. An in-loop loopfilter would need to do some sync
between tile threads, but that shouldn't be a big issue.
Resuls: with tiling disabled, we go up slightly because of improved edge
use in the intra4x4 prediction. With 2 tiles, we lose about ~1% on derf,
~0.35% on HD and ~0.55% on STD/HD. With 4 tiles, we lose another ~1.5%
on derf ~0.77% on HD and ~0.85% on STD/HD. Most of this loss is
concentrated in the low-bitrate end of clips, and most of it is because
of the loss of edges at tile boundaries and the resulting loss of intra
predictors.
TODO:
- more tiles (perhaps allow row-based tiling also, and max. 8 tiles)?
- maybe optionally (for EC purposes), motion vectors themselves
should not cross tile edges, or we should emulate such borders as
if they were off-frame, to limit error propagation to within one
tile only. This doesn't have to be the default behaviour but could
be an optional bitstream flag.
Change-Id: I5951c3a0742a767b20bc9fb5af685d9892c2c96f
Update the code to call the new convolution functions to do subpixel
prediction rather than the existing functions. Remove the old C and
assembly code, since it is unused. This causes a 50% performance
reduction on the decoder, but that will be resolved when the asm for
the new functions is available.
There is no consensus for whether 6-tap or 2-tap predictors will be
supported in the final codec, so these filters are implemented in
terms of the 8-tap code, so that quality testing of these modes
can continue. Implementing the lower complexity algorithms is a
simple exercise, should it be necessary.
This code produces slightly better results in the EIGHTTAP_SMOOTH
case, since the filter is now applied in only one direction when
the subpel motion is only in one direction. Like the previous code,
the filtering is skipped entirely on full-pel MVs. This combination
seems to give the best quality gains, but this may be indicative of a
bug in the encoder's filter selection, since the encoder could
achieve the result of skipping the filtering on full-pel by selecting
one of the other filters. This should be revisited.
Quality gains on derf positive on almost all clips. The only clip
that seemed to be hurt at all datarates was football
(-0.115% PSNR average, -0.587% min). Overall averages 0.375% PSNR,
0.347% SSIM.
Change-Id: I7d469716091b1d89b4b08adde5863999319d69ff
This commit introduces a new convolution function which will be used to
replace the existing subpixel interpolation functions. It is much the
same as the existing functions, but allows for changing the filter
kernel on a per-pixel basis, and doesn't bake in knowledge of the
filter to be applied or the size of the resulting block into the
function name.
Replacing the existing subpel filters will come in a later commit.
Change-Id: Ic9a5615f2f456cb77f96741856fc650d6d78bb91
This commit changes the 4x4 iDCT to use same algorithm & constants as
other iDCTs. The 4x4 fDCT is also changed to be based on the new iDCT.
Change-Id: Ib1a902693228af903862e1f5a08078c36f2089b0
This commit makes the NearestMV match the chosen
best reference MV. It can be a 0,0 or non zero vector
which means the the compound nearest mv mode can
combine a 0,0 and a non zero vector.
Change-Id: I2213d09996ae2916e53e6458d7d110350dcffd7a
and called this function in vp9_dequant_idct_add_32x32_c when
eob == 1. For the test clip used, the decoder performance improved
by 21+%. Based on Yaowu's 16 point idct work.
Change-Id: Ib579a90fed531d45777980e04bf0c9b23c093c43
Separate out code to set the main encode speed
related rd thresholds. Some values changed from
the initial defaults for various new modes.
Quality test results pending but even the addition
of some further non-zero defaults helps encode speed
somewhat in limited testing on derf clips.
Adjustment of thresholds for quality / speed tradeoff
to follow.
Change-Id: I117ee473157e151a1b93193d5f393449328de20d
fixed a function prototypes to prevent compiler warnings;
removed a function not in use;
un-capitialize "Refstride" to ref_stride
Change-Id: Ib4472b6084f357d96328c6a06e795b6813a9edba
This commit changes the inverse 16 point dct to use the same algorithm
as the one for 32 point idct. In fact, now 16 point dct uses the exact
version of the souce code for even portion of the 32 point idct.
Tests showed current implementation has significant better accuracy
than the previous version. With this implementation and the minor bug
fix on forward 16 point dct, encoding tests showed about 0.2% better
compression of CIF set, test results on std-hd setting pending.
Change-Id: I68224b60c816ba03434e9f08bee147c7e344fb63
The commit fixes a minor error in 16 point fdct where in a rotation can
produce result of -1 instead of 0.
Change-Id: I45aac4a52bcd06225c6d04e643547a13e1c1aade
This commit changes the 32x32 idct to use integer only. The algorithm
was taken directly from "A Fast Computational Algorithm for the
Discrete Cosine Tranform" by W. Chen, et al., which was published in
IEEE Transaction on Communication Vol. Com.-25 No. 9, 1977. The signal
flow graph in the original paper is for a 32 point forward dct, the
current implementation of inverse DCT was done by follow the graph in
reversed direction.
With this implementation, the 32 point inverse dct contains a 16 point
inverse dct in its even portion, similarly the 16 point idct further
contains 8 point and 4 point inverse dcts.
As of patch 4, encoding tests showed there is no compression loss when
compared against the floating point baseline. Numbers even showed very
small postives. (cif: .01%, std-hd: .05%).
Change-Id: I2d2d17a424b0b04b42422ef33ec53f5802b0f378
Started adding support for multiple internal decoder instances. Also added
code to limit the vp8 config options available when using frame-based
multithreading.
Change-Id: I0f1ee7abcfcff59204f50162e28254b8dd6972eb
This is identical to the later decisions made in encode_superblock().
This commit doesn't actually change anything, but makes the mbmi state
more consistent between the RD loop and the final encode result.
Change-Id: I9e735afb7c5a52e5b61728cb88c67ef9b9bf59be
The RD loop would change the pointer after the first mode (DC) was tested,
leading to corrupt block objects being provided for the others. This
would essentially render the i8x8 predictor useless.
Change-Id: I16c5906ca64fb34878ac32ce59af8974e4582bb8
Remove eob_max_offset markers and replace
with the generic skip_block flag to indicate
to the quantizer that all coeffs to be set to 0
and eob position set to 0;
Change-Id: Id477e8f8d4ec1a5562758904071013c24b76bfd7
Adds a special combination mode specific to intra prediciton
mode D45.
Current results with the compound inter/intra experiment:
derf: 0.2%
yt: 0.55%
std-hd: 0.75%
hd: 0.74%
Change-Id: I8976bdf3b9b0b66ab8c5c628bbc62c14fc72ca86
Trying to create Visual Studio project files would fail with:
make[1]: *** No rule to make target `obj_int_extract.bat', needed by
`.projects'. Stop.
Change-Id: Ie55458427ddea199a3de9973eaf2a37f711f839e
First step in simplifying the segment mode and
segment EOB flags into a simpler segment skip
flag that implies 0,0 mv and EOB at position 0.
Change-Id: Ib750cac31a7a02dc21082580498efd9f7d8d72a5
Simplification to eliminate a number of very large data
data structures. All zero run, zbin boosts for different
transform sizes are now limited to a maximum run length
of 15 before they max out the boost.
Some further work still needs be done to refactor, rationalize
and optimize the multiple quantizer functions.
The simplification coupled with tweaks to the 16 element array
now used for all transform sizes, has minimal effect on quality.
Change-Id: I6f3948b8ca0418b60d4db9030ff19026a34ed423
We'd backup and restore all cols for a 64x64 SB, but the array wouldn't
be big enough to hold all that data.
Change-Id: Ic68ea721bf07e0b2f3937bd16b0b734bcc743ce1
Adds a flag to disable features that would inhibit frame parallel
decoding. This includes backward adaptation and MV sorting based
on search in ref frame buffer.
Also includes some minor clean-ups.
Change-Id: I434846717a47b7bcb244b37ea670c5cdf776f14d
When error concealment is enabled, it swaps the mi and prev_mi ptrs after
each frame is decoded. The postproc uses the mi ptr for the mode info context.
Now the postproc will use the correct mode info context.
Change-Id: I537ae5450f319c624999b44525bb52bb30047b7b
Move SSE4 detection below compiler configuration. Otherwise ${CC} may
not be populated.
We are specifically interested in -msse4.1. Narrow detection code.
Change-Id: I0ffac49e91b3fdb2aceb6eb6b90dc1c10b159111
Added a quick eob == 0 check. Once the integer version of the dct32x32 is
complete, we can check for other eob cases.
For the 1080p clip used, the decoder performance improved by 4%.
Change-Id: I9390b6ed3c8be0c0c0a0c44c578d9a031d6e026e
Visual Studio reports and error on the line
static const int bsize2 = bsize >> 1;
"error C2099: initializer is not a constant"
Also warnings on signed/unsigned mismatch
Change-Id: I76cb06f736bd9c90107a26bfb3c130ec3f6c33de
Adds an error-resilient mode where frames can be continued
to be decoded even when there are errors (due to network losses)
on a prior frame. Specifically, backward updates are turned off
and probabilities of various symbols are reset to defaults at
the beginning of each frame. Further, the last frame's mvs are
not used for the mv reference list, and the sorting of the
initial list based on search on previous frames is turned off
as well.
Also adds a test where an arbitrary set of frames are skipped
from decoding to simulate errors. The test verifies (1) that if
the error frames are droppable - i.e. frame buffer updates have
been turned off - there are no mismatch errors for the remaining
frames after the error frames; and (2) if the error-frames are non
droppable, there are not only no decoding errors but the mismatch
PSNR between the decoder's version of the post-error frames and the
encoder's version is at least 20 dB.
Change-Id: Ie6e2bcd436b1e8643270356d3a930e8989ff52a5
This commit starts to convert the tests to a system where the codec
to be used is provided by a factory object. Currently no tests are
instantiated for VP9 since they all fail for various reasons, but it
was verified that they're called and the correct codec is
instantiated.
Change-Id: Ia7506df2ca3a7651218ba3ca560634f08c9fbdeb
Updated the instrinsic code to match Yaowu's latest loopfilter change.
(I584393906c4f5f948a581d6590959522572743bb)
The decoder performance improved by ~30% for the test clip used.
Change-Id: I026cfc75d5bcb7d8d58be6f0440ac9e126ef39d2
* changes:
Use alt-ref frame context for keyframes
Preserve the previous golden frame on golden updates
Generalize and increase frame coding contexts
Start to anonymize reference frames
Update encoder to use fb_idx_ref_cnt
Remove buffer-to-buffer copy logic
This matches the behavior prior to generalizing the frame context
selection, and intuitively makes sense in that the first forward ref
is immediately after the keyframe, so it's quality is improved a bit
by using the keyframe's entropy context rather than the default.
Change-Id: Ia82cef79382b9d8cfafdc44ba0533d4dc3e44053
Linking when we don't use it but it is available is probably harmless.
Gtest requires pthreads. Don't automatically enable unit tests if we
don't have it.
Change-Id: I5e6c3b609f840c7b6dbb36fc65809f0ef84685f8
The loop filtering used for MB edge or internal edge of a MB using 8x8
tranform was reading 5 pixel each side and writting 3 pixel each side.
With suggestion from Aki and Scott on hardware&software performance,
this commit changed to read 4 pixel each side and write 3 pixel each
side.
Change-Id: I584393906c4f5f948a581d6590959522572743bb
This file is currently unused, as the asm that depended on it has been
disabled for the current roll into Chromium. It's expected that it
will return in some form, so wrap it in an x86 check rather than
deleting it. This extra file isn't really an issue with the libvpx
build system, but affects the gyp builds since on ARM (android) it
tries to do the ADS->GAS conversion on all .asm files reported in
libvpx_srcs.txt.
Change-Id: I080fbc22ab59fff41264ae230a48fa753594135b
This commit restores the quality lost when the buffer-to-buffer copy
logic was removed. Note that this is specific to the current use of
golden frames and will need rework when RTC functionality is added.
Change-Id: I7324a75acd96eafd9e0f9b8633d782e390d5dc21
Previously there were two frame coding contexts tracked, one for normal
frames and one for alt-ref frames. Generalize this by signalling the
context to use in the bitstream, rather than tieing it to the alt ref
refresh bit. Also increase the number of contexts available to 4, which
may be useful for temporal scalability.
Change-Id: I7b66daaddd55c535c20cd16713541fab182b1662
Remove lst_fb_idx, gld_fb_idx, alt_fb_idx, refresh_last_frame,
refresh_golden_frame, refresh_alt_ref_frame from common. Gold/Alt are
encode side conventions. From the decoder's perspective, we want to be
dealing with numbered references.
Updates to active_ref 2 signal mode context switches, vestigial from
refresh_alt_ref_frame. This needs some clean up to make sense with
increased numbers of reference frames, as well as reimplementing the
swapping of alt/golden which was previously done using the
buffer-to-buffer copy mechanism removed in an earlier commit.
Change-Id: I7334445158b7666f9295d2a2dd22aa03f4485f58
Do reference counting the same way on the encoder as the decoder does,
rather than maintaining the 'flags' member of YV12_BUFFER_CONFIG.
Change-Id: I91dc210ffca081acaf9d5c09a06e7461b3c3139c
This is the first in a series of commits to add additional reference
frames to the codec. Each frame will be able to update any of the
available references, but copying between references is not
supported.
Change-Id: I5945b5ce6cc3582c495102b4e7eed4f08c44d5a1
Uses a single 1D table to implement the weighting of the predictors
for the compound inter-intra experiment.
Change-Id: I204ffbe4f9fc79d5d43b6c724ad253d800461012
These variables have the type int64_t, not long long. long long could
be a larger type than 64 bits. Emulate INT64_MAX for older versions of
MSVC, and remove the unreferenced vpx_ports/vpxtypes.h
Change-Id: Ideaca71838fcd3849d816d5ab17aa347c97d03b0
This experiment gives little gains and adds relatively much code
complexity (and it hinders other experiments), so let's get rid of
it.
Change-Id: Id25e79a137a1b8a01138aa27a1fa0ba4a2df274a
In commit 9a1d73d, loop filtering was added for UV 4x4 boundaries
when TX_8X8 is used by a MB. This commit further refined the decision
to be based on the actual transform used for the UV planes. When
UV planes use 4x4 transform, i.e. when prediction mode used is either
I8X8_PRED or SPLITMV, UV planes are filtered on 4x4 boundaries, and no
filtering is applied on 4x4 block boundaries when UV planes use 8X8
transform.
Change-Id: Ibb404face0a1d129b4b4abaf67c55d82e8df8bec
This prevents ill-defined behaviour, such as setting x->skip for a mode
that is excluded because of frame-level flags (e.g. filter selection,
compound prediction selection), then not breaking out of the RD loop
because the mode is not allowed, but keeping the flag on. Whatever mode
is iterated through next in the RD loop will then carry this flag, and
all sort of bad stuff happens, such as x->skip being set on intra pred
modes.
Change-Id: I5bec46b36e38292174acb1c564b3caf00a9b4b9a
Previous commit does not build cleanly on Jenkins with the DWT/DCT
hybrid experiment enabled (--enable-dwtdcthybrid).
Change-Id: Ia67e8f59d17ef2d5200ec6b90dfe6711ed6835a5
Fixes some scaling issues. Adds an option to only compute the
dct on the low-low subband for 32x32 and 64x64 blocks using
only a single 16x16 dct after 1 and 2 wavelet decomposition
levels respectively. Also adds an option to use a 8x8 dct
as building block.
Currenlty with the 2/6 filter and with a single 16x16 dct on
the low low band, the reuslts compared to full 32x32 dct is
as follows:
derf: -0.15%
yt: -0.29%
std-hd: -0.18%
hd: -0.6%
These are my current recommended settings, since the 2/6 filter
is very simple.
Results with 8x8 dct are about 0.3% worse.
Change-Id: I00100cdc96e32deced591985785ef0d06f325e44
and vp9_mb_lpf_vertical_edge_w_sse2. This was quickly done so we can
run some tests over the weekend. Future commits will optimize/refactor these
functions further.
The decoder performance improved by ~17% for the clip used.
Change-Id: I612687cd5a7670ee840a0cbc3c68dc2b84d4af76
Updated the rtcd_defs and used the sse2 uv version
of the loopfilter. The performance improved by ~8%
for the test clip used.
Change-Id: I5a0bca3b6674198d40ca4a77b8cc722ddde79c36
The commit changed to not to use wider lpf within a superblock when
32x32 transform is used for the block.
The commit also changed to use the shorter version of loop filtering:
for UV planes.
Change-Id: I344c1fb9a3be9d1200782a788bcb0b001fedcff8
This patch removes the old pred-filter experiment and replaces it
with one that is implemented using the switchable filter framework.
If the pred-filter experiment is enabled, three interopolation
filters are tested during mode selection; the standard 8-tap
interpolation filter, a sharp 8-tap filter and a (new) 8-tap
smoothing filter.
The 6-tap filter code has been preserved for now and if the
enable-6tap experiment is enabled (in addition to the pred-filter
experiment) the original 6-tap filter replaces the new 8-tap smooth
filter in the switchable mode.
The new experiment applies the prediction filter in cases of a
fractional-pel motion vector. Future patches will apply the filter
where the mv is pel-aligned and also to intra predicted blocks.
Change-Id: I08e8cba978f2bbf3019f8413f376b8e2cd85eba4
This is to add to the 64x64 transform experiment as an alternative to
a 64x64 DCT.
Two levels of wavelet decomposition is used on a 64x64 block, followed
by 16x16 DCT on the four lowest subbands. The highest three subbands
are left untransformed after the first level DWT.
Change-Id: I3d48d5800468d655191933894df6b46e15adca56
This is to fix a decoder crash when decoder skips a number of frame to
continue decoding from a later key frame.
Change-Id: I3ba116eba6c3440e0528a21f53745f694302e4ad
This commit did a couple of minor cleanup/refactoring to prepare for
futher loop filter experiments. It merged y_only version of loop filter
function into the regular one, which makes sure that same logic is used
for functions for picking level and for actual loop filtering.
Change-Id: Id10c94dccd45f58e5310bacfdf6ee63cbb60b86f
Mode selection for SBs could enter an infinite loop because
the interpolation filter mode index was not being reset
correctly.
Change-Id: I4bbe726f29ef5b6836e94884067c46084713cc11
This experimental change reorders the search so
that all possible references that match the target
reference frame are tested first and these in order
of distance from the current block. These will usually
be the highest scoring candidates.
If we do not find enough good candidates this way
we try non matching cases. These will usually be lower
scoring candidates.
The change in order together with breakouts when
we have found enough candidates should reduce
the computational cost and especially reduce the number
of sort operations.
Quality Results:
Std Hd +0.228%, Hd +0.074%, YT +0.046%, derf +0.137%
This effect is probably due to the fact that more distant
weak candidates are now less likely to get "promoted" over
near candidates even if they are repeated.
Change-Id: Iec37e77d88a48ad0ee1f315b14327a95d63f81f6
Use the proper seg/mode/ref filter offsets when selecting the
frame loop filter level for fast mode (pick_filter_level_fast).
Change-Id: I2473e2131c800ad19755cb6211ad735fecfe2ac0
Old Scheme:
When SWITCHABLE filter selection is enabled the encoder
evaluates the use of each interpolation filter type and
selects the best one to use at the MB level. A frame-
level flag can be set to force the use of a particular
filter type for all MBs in a frame if it is more efficient
to encode that way. The logic here involved a Q dependent
threshold that assumed that the second 8-tap filter was
a high-pass filter. However, this requires a trip around
the recode loop. If the frame-level flag indicates use
of a particular filter, the other filters are not
evaluated in the pick_mode loop.
New Scheme:
Each filter type is evaluated at the MB level and a record
of the best filter is kept, irrespective of what filter
is signaled at the frame-level. Once all MBs have been
encoded, a decision is made as to what frame-level mode
to set for the *next* frame. If one filter is used by 80%
or more of the MBs, then this filter is forced since it
is assumed that this will be more efficient if the
next frame has similar characteristics. i.e. there is a
one-frame lag between measuring the filter selection and
setting the frame-level mode to use.
Change-Id: I6a7e7ced8f27e120fafb99db2dc9c6293f8d20f7
Remove special case function cost_coeffs_2x2() and change function
cost_coeffs() to handle 2nd order haar block as it is handle all
other block types already.
Change-Id: I2aac6f81ee0ae9e03d6a8da4f8681d69b79ce41f
Read mode before calling vp9_find_best_ref_mvs(). If the mode is
ZEROMV, the best ref_mvs are not needed. Then, we can skip calling
vp9_find_best_ref_mvs().
Change-Id: I5baa3658dd3f1c7107211cbbbcf919b4584be2e2
The 2-D inverse transform X = M1*Z*Transposed_M2 was calculated
in 2 steps from left to right:
1. Vertical transform: Y = M1*Z
2. Horizontal transform: X= Y*Transposed_M2
In SIMD, a transpose is needed in vertical transform.
Here, switched the calculation order to do it from right to left.
In this way, we could eliminate that transpose by writing the
intermediate results out to their transposed positions.
Change-Id: I34dfe5eb01292f6e363712420d99475e2e81e12c
Various fixups to resolve issues when building vp9-preview under the more stringent
checks placed on the experimental branch.
Change-Id: I21749de83552e1e75c799003f849e6a0f1a35b07
Adds an experiment to derive the previous context of a coefficient
not just from the previous coefficient in the scan order but from a
combination of several neighboring coefficients previously encountered
in scan order. A precomputed table of neighbors for each location
for each scan type and block size is used. Currently 5 neighbors are
used.
Results are about 0.2% positive using a strategy where the max coef
magnitude from the 5 neigbors is used to derive the context.
Change-Id: Ie708b54d8e1898af742846ce2d1e2b0d89fd4ad5
Remove an extra level of escaping around the $@ variable to get valid output.
Prior to this change, modifying header files did not trigger a rebuild of
sources dependent on them.
Change-Id: I93ecc60371b705b64dc8a2583a5d31126fe3f851
This patch changes the token packing to call the bool encoder API rather
than inlining it into the token packing function, and similarly removes
a special get_signed case from the detokenizer. This allows easier
experimentation with changing the bool coder as a whole.
Change-Id: I52c3625bbe4960b68cfb873b0e39ade0c82f9e91
ndk-build is intended to be launched from the application directory,
not the jni directory. Clarify the path in the comments.
Change-Id: Ie0faa89a13d967088a4fd2fd1c647962a9c04217
For coefficients, use int16_t (instead of short); for pixel values in
16-bit intermediates, use uint16_t (instead of unsigned short); for all
others, use uint8_t (instead of unsigned char).
Change-Id: I3619cd9abf106c3742eccc2e2f5e89a62774f7da
The MAX_PSNR was used to assign a "psnr" number when the mse is close
to zero. The direct assignment is used to prevent divide by zero in
computation. Changing it from 60 to 100 to be consistent against what
is being done in VP9
Change-Id: I4854ffc4961e59d372ec8005a0d52ca46e3c4c1a
The mismatch was caused by an improper merge of cleanup code around
tokenize_b() and stuff_b() with TX32X32 experiment.
Change-Id: I225ae62f015983751f017386548d9c988c30664c
Modifies the scanning pattern and uses a floating point 16x16
dct implementation for now to handle scaling better.
Also experiments are in progress with 2/6 and 9/7 wavelets.
Results have improved to within ~0.25% of 32x32 dct for std-hd
and about 0.03% for derf. This difference can probably be bridged by
re-optimizing the entropy stats for these transforms. Currently
the stats used are common between 32x32 dct and dwt/dct.
Experiments are in progress with various scan pattern - wavelet
combinations.
Ideally the subbands should be tokenized separately, and an
experiment will be condcuted next on that.
Change-Id: Ia9cbfc2d63cb7a47e562b2cd9341caf962bcc110
Gives 0.5-0.6% improvement on derf and stdhd, and 1.1% on hd. The
old tables basically derive from times that we had only 4x4 or
only 4x4 and 8x8 DCTs.
Note that some values are filled with 128, because e.g. ADST ever
only occurs as Y-with-DC, as does 32x32; 16x16 ever only occurs
as Y-with-DC or as UV (as complement of 32x32 Y); and 8x8 Y2 ever
only has 4 coefficients max. If preferred, I can add values of
other tables in their place (e.g. use 4x4 2nd order high-frequency
probabilities for 8x8 2nd order), so that they make at least some
sense if we ever implement a larger 2nd order transform for the
8x8 DCT (etc.), please let me know
Change-Id: I917db356f2aff8865f528eb873c56ef43aa5ce22
Add a function clip_pixel() to clip a pixel value to the [0,255] range
of allowed values, and use this where-ever appropriate (e.g. prediction,
reconstruction). Likewise, consistently use the recently added function
clip_prob(), which calculates a binary probability in the [1,255] range.
If possible, try to use get_prob() or its sister get_binary_prob() to
calculate binary probabilities, for consistency.
Since in some places, this means that binary probability calculations
are changed (we use {255,256}*count0/(total) in a range of places,
and all of these are now changed to use 256*count0+(total>>1)/total),
this changes the encoding result, so this patch warrants some extensive
testing.
Change-Id: Ibeeff8d886496839b8e0c0ace9ccc552351f7628
This reverts commit 8bb82fded5.
This is an incorrect workaround. It has been fixed in the GYP files
upstream.
Change-Id: If42f997747ce878b874508fdf7ae5a73a6fa1b2b
WIP: Fixing unsafe threading in VP8 encoder.
Use the passed in macroblock instead of the macroblock located in
cpi.
Change-Id: I1bfa07de6ea463f2baeaae1bae5d950691bc4afc
Some further changes and refactoring of mv
reference code and selection of center point for
searches. Mainly relates to not passing so many
different local copies of things around.
Some place holder comments.
Change-Id: I309f10ffe9a9cde7663e7eae19eb594371c8d055
This commit changed the ENTROPY_CONTEXT conversion between MBs that
have different transform sizes.
In additioin, this commit also did a number of cleanup/bug fix:
1. removed duplicate function vp9_fix_contexts() and changed to use
vp8_reset_mb_token_contexts() for both encoder and decoder
2. fixed a bug in stuff_mb_16x16 where wrong context was used for
the UV.
3. changed reset all context to 0 if a MB is skipped to simplify the
logic.
Change-Id: I7bc57a5fb6dbf1f85eac1543daaeb3a61633275c
In addition to allowing tests to use the RTCD-enabled functions (perhaps transitively)
without having run a full encode/decode test yet, this fixes a linking issue with
Apple's G++ whereby the Common symbols (the function pointers themselves) wouldn't
be resolved. Fixing this linking issue is the primary impetus for this patch, as none
of the tests exercise the RTCD functionality except through the main API.
Change-Id: I12aed91ca37a707e5309aa6cb9c38a649c06bc6a
Don't use vp9_decode_coefs_4x4() for 2nd order DC or luma blocks. The
code introduces some overhead which is unnecessary for these cases.
Also, remove variable declarations that are only used once, remove
magic offsets into the coefficient buffer (use xd->block[i].qcoeff
instead of xd->qcoeff + magic_offset), and fix a few Google Style
Guide violations.
Change-Id: I0ae653fd80ca7f1e4bccd87ecef95ddfff8f28b4
Use these, instead of the 4/5-dimensional arrays, to hold statistics,
counts, accumulations and probabilities for coefficient tokens. This
commit also re-allows ENTROPY_STATS to compile.
Change-Id: If441ffac936f52a3af91d8f2922ea8a0ceabdaa5
This adds Debargha's DCT/DWT hybrid and a regular 32x32 DCT, and adds
code all over the place to wrap that in the bitstream/encoder/decoder/RD.
Some implementation notes (these probably need careful review):
- token range is extended by 1 bit, since the value range out of this
transform is [-16384,16383].
- the coefficients coming out of the FDCT are manually scaled back by
1 bit, or else they won't fit in int16_t (they are 17 bits). Because
of this, the RD error scoring does not right-shift the MSE score by
two (unlike for 4x4/8x8/16x16).
- to compensate for this loss in precision, the quantizer is halved
also. This is currently a little hacky.
- FDCT and IDCT is double-only right now. Needs a fixed-point impl.
- There are no default probabilities for the 32x32 transform yet; I'm
simply using the 16x16 luma ones. A future commit will add newly
generated probabilities for all transforms.
- No ADST version. I don't think we'll add one for this level; if an
ADST is desired, transform-size selection can scale back to 16x16
or lower, and use an ADST at that level.
Additional notes specific to Debargha's DWT/DCT hybrid:
- coefficient scale is different for the top/left 16x16 (DCT-over-DWT)
block than for the rest (DWT pixel differences) of the block. Therefore,
RD error scoring isn't easily scalable between coefficient and pixel
domain. Thus, unfortunately, we need to compute the RD distortion in
the pixel domain until we figure out how to scale these appropriately.
Change-Id: I00386f20f35d7fabb19aba94c8162f8aee64ef2b
The loopfilter thread from the previous frame can be running while
starting the current frame. cpi->Source will change during this time causing
the wrong data to be copied. The refresh_x_frame flags also change, which
will cause incorrect updates of the denoised buffers.
Change-Id: I7d982b4fcb40a0610801332aa85f3b792c64e4c3
The denoiser was writing to LAST_FRAME buffer. If LAST_FRAME isn't being
updated, the reference frame buffers were out of sync between the encoder and the
denoised raw buffers. This patch resolves the discrepancy by always writing to a work
buffer (INTRA_FRAME) and then copying from that buffer to any buffers that needs to
be updated.
Change-Id: I6dd855b9749978b542bc3d515914d5f16faf25df
Multi-threaded code was not updated to disable background
refresh for non base-layer frames at the time it was
disabled in the main C-code.
Change-Id: Id6cc376130b7def046942121cfd0526b4f0a71d4
This patch reduces the cpu cost of the MV ref
search by only allowing insert for candidates
that would be in the current top 4.
This could alter the outcome and slightly favors
near candidates which are tested first but also
limits the worst case loop count to 4 and means in
many cases it will drop out and not happen.
Change-Id: Idd795a825f9fd681f30f4fcd550c34c38939e113
The commit changed the trellis quantization function optimize_b() to
work for MBs using all transform sizes, and eliminated the function
for MB using 16x16 transform only, optimize_b_16x16.
Change-Id: I3fa650587ab5198ed16315b38754783a72b33ba2
Only declare the functions in vpx_scale RTCD and include the relevant
header.
Remove unused files and functions in vpx_scale to avoid wasting time
renaming. vpx_scale/win32/scaleopt.c contains functions which have not
been called in a long time but are potentially optimized.
The 'vp8' functions have not been renamed yet. That is for after the
cleanup.
Change-Id: I2c325a101d60fa9d27e7dfcd5b52a864b4a1e09c
This is enabled by default in the main configure.sh, but apparently
is supposed to be disabled if the hardware doesn't support it.
Unaligned reads is only supported on armv6 and newer.
Change-Id: Ie1412e36a14036bbb4fe7b89aa36a178f35b2228
fixes, e.g.:
In file included from ../vpx/internal/../vpx_decoder.h:33:0,
from ../vpx/internal/vpx_codec_internal.h:46,
from ../vp8/common/onyx.h:21,
from ../vp8/encoder/block.h:15,
from ../test/subtract_test.cc:18:
../vpx/internal/../vpx_codec.h:52:0: warning: "DECLSPEC_DEPRECATED"
redefined
/usr/x86_64-w64-mingw32/sys-root/mingw/include/winnt.h:164:0: note: this
is the location of the previous definition
Change-Id: Iddc9318451d3e4e4a78b4d706518083fffff5c61
Don't use the switch to gf_rate_correction factor when
temporal layers is used (i.e., cpi->oxcf.number_of_layers > 1).
In temporal layers, we prefer to avoid this as any frame
(e.g., base layer frame at anchor of pattern) may update
both last and golden (and possibly alt-ref), and so we would get
different rate correction factors within the same layer.
This change will make sure one rate correction factor exists for each layer.
Also, made some other code in qp-regulate that depends on
alt/golden update specific to the 1 layer case.
Change-Id: I41a6d085bd477f9307ef3b3c311695214273892c
xmm[6-11] should be saved and restored for Windows x64; prevents an
encoder mismatch and some datarate issues.
Change-Id: I03c38eb18ec20c6c441cae19416393058baad1ee
xmm6/xmm7 should be saved and restored for Windows x64; prevents an
encoder mismatch and some datarate issues.
Change-Id: Ifa1a82ab25fbdc5112d66f5332e14b16e69ac164
https://codereview.chromium.org/11413061/
The Android NDK automatically manages the include directories. Trying
to do so manually for the Android GYP files can cause the wrong setjmp.h
to be included.
Change-Id: I5c3769f983fcbad1ed602feda781690c6e4e97b3
Exlcude key frame from buffer underrun check, and increase
lowest bitrate in BasicBufferModel.
Both changes are needed because of a known issue (#495).
Change-Id: If5e994f813d7d5ae870c1a72be404c8f7dbbdf27
This change converts push to stmdb and pop to ldmia. In addition word boundaries
are obeyed using \b avoiding substituion where not appropriate.
Patch provided by ihf@chromium.org.
TEST=Used on many Daisy assembly files.
BUG=None.
Change-Id: Ie5b197b158edd0467294551d0b640c8db6530d95
So that, in case of error, the arrays are not filled with trash
pointers that are attempted a free() during vp8mt_de_alloc_temp_buffers()
Change-Id: Ic074549c2903a43316510eb42e4f393e7d3ee528
* be found in the AUTHORS file in the root of the source tree.
*/
#ifndef DETOKENIZE_H
#define DETOKENIZE_H
#ifndef DETOKENIZE_H_
#define DETOKENIZE_H_
#include"onyxd_int.h"
voidvp8_reset_mb_tokens_context(MACROBLOCKD*x);
intvp8_decode_mb_tokens(VP8D_COMP*,MACROBLOCKD*);
#endif /* DETOKENIZE_H */
#endif // DETOKENIZE_H
Some files were not shown because too many files have changed in this diff
Show More
Reference in New Issue
Block a user
Blocking a user prevents them from interacting with repositories, such as opening or commenting on pull requests or issues. Learn more about blocking a user.
