Now we have entropy code separate from scan/iscan code. The next step
in future is to move iscan code from common part to the encoder.
Change-Id: Id9732f7d80aec00af35c1d58d1137c4c96c91451
A new set of MSVC warnings were introduced by change
I3f36d3f7cd8d15195a6e2fafd1777cdaf9ecb847
In particular MSVC does not like:-
typedef const int16_t subpel_kernel[SUBPEL_TAPS];
struct subpix_fn_table {
const subpel_kernel *filter_x;
const subpel_kernel *filter_y;
};
causes new warning in MSVC.
warning C4114: same type qualifier used more than once
Change-Id: Iae596fd13aadf36169faf00c68eabe9a32a9b156
The idea is to have the following names for each transform size:
vp9_idct4x4_add
vp9_idct4x4_1_add
vp9_idct4x4_10_add
vp9_idct4x4_16_add
vp9_idct8x8_add
vp9_idct8x8_1_add
vp9_idct8x8_10_add
vp9_idct8x8_64_add
etc for 16x16, 32x32
The actual list of renames in this patch:
vp9_idct_add_lossless -> vp9_iwht4x4_add
vp9_short_iwalsh4x4_add -> vp9_iwht4x4_16_add
vp9_short_iwalsh4x4_1_add -> vp9_iwht4x4_1_add
vp9_idct_add -> vp9_idct4x4_add
vp9_short_idct4x4_add -> vp9_idct4x4_16_add
vp9_short_idct4x4_1_add -> vp9_idct4x4_1_add
Change-Id: I6f43f7437c68dd30cdd05d72e213765578ed30b1
Moving INTERPOLATIONFILTERTYPE enum and subpix_fn_table struct to
vp9_filter.h. Adding convenient typedef for subpel kernels.
Function vp9_setup_interp_filters() besides setting xd->subpix.filter_x &
xd->subpix.filter_y has a side effect of also setting scale factors. This
is not required inside decode_modes_b() because scale factors have been
already set by set_ref() calls. That's why replacing
vp9_setup_interp_filters() call with newly created vp9_get_filter_kernel()
call. The behavior of vp9_setup_interp_filters() is unchanged (it
is used from the encoder).
Change-Id: I3f36d3f7cd8d15195a6e2fafd1777cdaf9ecb847
This commit defines b_mode_info as a struct type. This will allow
us to further remove the use of PARTITION_INFO in the encoding process.
Change-Id: I975b0f7d557b5e0f66545a61b472def76b671cce
In subpixel filters, prefetched source data, unrolled loops,
and interleaved instructions.
In HORIZx4, integrated the idea in Scott's CL (commit:
d22a504d11), which was suggested by
Erik/Tamar from Intel. Further tweaking was done to combine row 0,
2, and row 1, 3 in registers to do more 2-row-in-1 operations until
the last add.
Test showed a ~2% decoder speedup.
Change-Id: Ib53d04ede8166c38c3dc744da8c6f737ce26a0e3
Moving functions from vp9_idct_blk to vp9_idct because these functions are
used from both encoder and decoder. Removing duplicated code from
vp9_encodemb.c and reusing existing functions.
Change-Id: Ia0a6782f8c4c409efb891651b871dd4bf22d5fe8
The codec should effectively run with motion vector of range (-2048, 2047)
in full pixels, for sequences of 1080p and below. Add assertions to clarify
this behavior.
Change-Id: Ia0cac28249f587d8f8882205228fa480263ab313
Moving out decode_tokens function calls and adding decode_blocks boolean
variable. We only have to decode if eobtotal > 0, i.e. we have at least one
non-zero coefficient. Also inlining and remove vp9_set_pred_flag_mbskip
function.
Change-Id: I7be38b12ee8206faf0beea2bbf4d52be42575b03
Interleaved the instructions, reduced register dependency, and
prefetched the source data. This improved the decoder speed
by 0.6% - 2%.
Change-Id: I568067aa0c629b2e58219326899c82aedf7eccca
byte version of ronalds d153 ssse3 optimizations for
4x4 and 8x8
(commit: fc91a2a112238a1aee568f3b840585de4e928fca)
Change-Id: Iec4426032311483f615fd9e0dceba3ee85ddebd7
We don't need these functions anymore. The only one which was actually
used is vp9_add_constant_residual_32x32. Addition of
vp9_short_idct32x32_1_add eliminates this single usage. SSE2 optimized
version of vp9_short_idct32x32_1_add will be added in the next patch set,
right now it is only C implementation. Now we have all idct functions
implemented in a consistent manner.
Change-Id: I63df79a13cf62aa2c9360a7a26933c100f9ebda3
Both vp9_init_mbmode_probs() and vp9_zero(cm->ref_frame_sign_bias) are
called inside vp9_setup_past_independence() which called in any case for
encoder/decoder after VP9_COMMON struct creation.
Change-Id: I3724d1a4fb8060101ff0290dd6a158f0b5c57bb4
Replace current code which corrupts the stack by
duplicate of vp8 code to save and restore neon
registers.
Change-Id: Ibb0220b9aa985d10533befa0a455ebce57a2891a
- full ASM version, no more C gateway file.
- integrate combine-add with last step of 2nd pass.
- remove a few push/pop pairs.
- some instruction reordering to hide latency.
Change-Id: Ic9d9933c908b65d1bf7ba8fd47b524cda808c9c6
Current x86inc.asm didn't handle 32bit PIC build properly.
TEXTRELs were seen in the library built. The PIC macros from
libvpx's x86_abi_support.asm was used to fix this problem.
The assembly code was modified to use the macros.
Notes: We need this fix in for decoder building. Functions in
encoder will be fixed later.
Change-Id: Ifa548d37b1d0bc7d0528db75009cc18cd5eb1838
The sub8x8 check can be directly inferred from block_idx, hence
removed from the arguments if get_sub_block_mv.
Change-Id: Ib766d57e81248fb92df0f6d9b163e6c77b933ccd
This is incompatible with most toolchains other than gcc.
Revert "Deleted #include <inttypes.h>"
This reverts commit 4d018be950.
This reverts commit d22a504d11.
Change-Id: I1751dc6831f4395ee064e6748281418e967e1dcf
Reformatted version of a patch submitted by Erik/Tamar
from Intel. For the test clips used, the decoder
performance improved by ~2%.
Change-Id: Ifbc37ac6311bca9ff1cfefe3f2e9b7f13a4a511b
mode_info_context was stored as a grid of MODE_INFO structs.
The grid now constists of pointers to MODE_INFO structs. The
MODE_INFO structs are now stored as a stream (decoder only),
eliminating unnecessary copies and is a little more cache
friendly.
Change-Id: I031d376284c6eb98a38ad5595b797f048a6cfc0d
Sample app: vp9_spatial_scalable_encoder
vpx_codec_control extensions:
VP9E_SET_SVC
VP9E_SET_WIDTH, VP9E_SET_HEIGHT, VP9E_SET_LAYER
VP9E_SET_MIN_Q, VP9E_SET_MAX_Q
expanded buffer size for vp9_convolve
modified setting of initial width in vp9_onyx_if.c so that layer size
can be set prior to initial encode
Default number of layers set to 3 (VPX_SS_DEFAULT_LAYERS)
Number of layers set explicitly in vpx_codec_enc_cfg.ss_number_layers
Change-Id: I2c7a6fe6d665113671337032f7ad032430ac4197
The commit changes the border pixel extension from 160 pixel each side
to what is necessary in arnr filter or motion estimation portion, i.e.
16 pixel on top and left side. For right or bottom side, the extension
is changed to either round up image size to multiple of 64 or at least
16 pixels.
Change-Id: Ic05e19b94368c1ab4df568723aae5734e6c3d2c5
Adds a new end-usage option for constant quality encoding in vpx. This
first version implemented for VP9, encodes all regular inter frames
using the quality specified in the --cq-level= option, while encoding
all key frames and golden/altref frames at a quality better than that.
The current performance on derfraw300 is +0.910% up from bitrate control,
but achieved without multiple recode loops per frame.
The decision for qp for each altref/golden/key frame will be improved
in subsequent patches based on better use of stats from the first pass.
Further, the qp for regular inter frames may also be varied around the
provided cq-level.
Change-Id: I6c4a2a68563679d60e0616ebcb11698578615fb3
mode_info_context was stored as a grid of MODE_INFO structs.
The grid now constists of a pointer to a MODE_INFO struct and
a "in the image" flag. The MODE_INFO structs are now stored
as a stream, eliminating unnecessary copies and is a little
more cache friendly.
For the test clips used, the decoder performance improved
by ~4.3% (1080p) and ~9.7% (720p).
Patch Set 2: Re-encoded clips with latest. Now ~1.7% (1080p)
and 5.9% (720p).
Change-Id: I846f29e88610fce2523ca697a9a9ef2a182e9256
The 32x32 forward transform can potentially reach peak coefficient
value close to 32700, while the rounding factor can go upto 610.
This could cause overflow issue in the SSSE3 implementation of 32x32
quantization process.
This commit resolves this issue by replacing the addition operations
with saturated addition operations in 32x32 block quantization.
Change-Id: Id6b98996458e16c5b6241338ca113c332bef6e70
Moves counting of mv branches to where we have a new mv, instead of after
the whole frame is summed.
Change-Id: I945d9f6d9199ba2443fe816c92d5849340d17bbd
This commit fixed the potential overflow issue in the SSE2
implementation of 32x32 forward DCT. It resolved the corrupted
coded frames in the border of scenes.
Change-Id: If87eef2d46209269f74ef27e7295b6707fbf56f9
- Intermediate height was not correct i.e. when block size is 4 and
y_step_q4 is 6. In this case intermediate height was
(4*6) >> 4 = 1 and vertical interpolation needs two source pixels
plus 7 extra pixels for taps.
- Also if the current output block is 16x16 and we are using 4x upscaling
we need only 12 rows after horizontal filtering instead of 16.
Patch Set 2: Intermediate_height updated after CL 66723
"Fix bug in convolution functions (filter selection)"
Change-Id: I5a1a1bc2ac9d5edb3a6e0818de618bf318fdd589
The 32x32 quantization process can potentially have the intermediate
stacks over 16-bit range, thereby causing enc/dec mismatch. This commit
fixes this overflow issue in the SSSE3 implementation, as well as the
prototype, of 32x32 quantization.
This fixes issue 607 from webm@googlecode.
Change-Id: I85635e6ca236b90c3dcfc40d449215c7b9caa806
This patch is a reformatted version of optimizations done by
engineers at Intel (Erik/Tamar) who have been providing
performance feedback for VP9. For the test clips used (720p, 1080p),
up to 1.2% performance improvement was seen.
Change-Id: Ic1a7149098740079d5453b564da6fbfdd0b2f3d2
Make the current head working properly, while working on fixing an
issue in the SSSE3 implementation of 32x32 quantization.
Change-Id: Ic029da3fd7f1f5e58bc641341cbd226ec49a16bc
Previous change c4048dbd limits the mv search range assuming max block
size of 64x64, this commit change the search range using actual block
size instead.
Change-Id: Ibe07ab02b62bf64bd9f8675d2b997af20a2c7e11
Making code more compact, adding consts, removing redundant arguments,
adding do/while(0) for macros.
Change-Id: Ic9ec0bc58cee0910a5450b7fb8cfbf35fa9d0d16
(In response to Issue 604:
https://code.google.com/p/webm/issues/detail?id=604)
There were bugs in the convolution code for two cases:
1. Where the filter table was assumed to be aligned to a
256 byte boundary. The offset of the pixel in the
source buffer was computed incorrectly.
2. Where no such alignment assumption was made. An
incorrect address for the filter table base was used.
To fix both problems, I now assume that the filter table is
256-byte aligned and modify the pixel offset calculation to
match.
A later patch should remove the restriction that the filter
table is aligned to a 256-byte boundary.
There was also a bug in the ConvolveTest unit test
(convolve_test.cc).
(Bug & initial fix suggestion submitted by Tero Rintaluoma
and Sami Pietilä).
Change-Id: I71985551e62846e55e40de9e7e3959d4805baa82
vp9_short_idct10_16x16_add is used to handle the block that only have valid data
at top left 4x4 block. All the other datas are 0. So we could cut many
unnecessary calculations in order to save instructions.
Change-Id: I6e30a3fee1ece5af7f258532416d0bfddd1143f0
It is possible to have invalid scale factors and not access them
during decoding. Error is reported if we really try to use invalid scale
factors.
Change-Id: Ie532d3ea7325ee0c7a6ada08269f804350c80fdf
Adding set_contexts contexts function and call it instead of
set_contexts_on_border. Calling txfrm_block_to_raster_xy to get aoff and
loff.
Change-Id: I41897e344afd2cae1f923f4fdbe63daccf6fe80e
Moving foreach_predicted_block_in_plane function to vp9_reconinter.c
because there is only one usage.
Change-Id: I9852feae43fc3cf809b817fc541d043bc5496209
Updating implementation of vp9_get_pred_context_single_ref_p2 using
has_second_ref function to make code easier to read.
Change-Id: I5ba642712f59861a48aab974e73aa01640d086fe
vp9_short_idct10_8x8_add is used to handle the block that only have valid data
at top left 4x4 block. All the other datas are 0. So we could cut several
unnecessary calculations in order to save instructions.
Change-Id: I34fda95e29082b789aded97c2df193991c2d9195
Updating implementation of vp9_get_pred_context_single_ref_p1 using
has_second_ref function to make code easier to read.
Change-Id: Ie8f60403a7195117ceb2c6c43176ca9a9e70b909
As the pixel values beyond image border are duplicates of pixels
on edge, the change limits the mv search range, any mv beyond
the limits no longer produce new/different prediction values
as entire block with pixels used for subpel interpolation are
outside image border.
Change-Id: I4c6fdf06e33c1cef1489f5470ce0fb4e5e01fb79
Updating all foreach_transformed_block_visitor functions to work with
plane block size instead of general block. Removing a lot of duplicated
code.
Change-Id: I6a9069e27528c611f5a648e1da0c5a5fd17f1bb4
This change set is intermediate. The next one will remove all repetitive
plane_bsize calculations, because it will be passed as argument to
foreach_transformed_block_visitor.
Change-Id: Ifc12e0b330e017c6851a28746b3a5460b9bf7f0b
The intent was to initialize the deltas for the
segment to the computed value, irrespective of mode
and reference frame if (mode_ref_delta_enabled == 0).
(In response to bug posted by Manjit Hota to codec-devel
and webm-discuss lists)
Change-Id: I10435cb63d0f88359bb4c14f22181878a1988e72
When the frame size changes the last frame segment map must
be resized to match and initialized to 0.
Change-Id: Idc10de109f55dbe9af3a6caae355a2974712243d
VP9_COMMON is the right place to segmentatation struct because it has
global segmentation parameters, not something specific to macroblock
processing.
Change-Id: Ib9ada0c06c253996eb3b5f6cccf6a323fbbba708
This commit unifies the rate-distortion cost calculation process of
luma and chroma components. It allows early termination to be enabled
later in the rd search loop of chroma components, in consistent with
luma pixels.
Change-Id: I2e52a7c6496176bf2a5e3ef338d34ceb8aad9b3d
Making foreach_transformed_block_in_plane more clear (it's not finished
yet). Using explicit tx_size variable consistently instead of
(ss_txfrm_size / 2) or (ss_txfrm_size >> 1) expression.
Change-Id: I1b9bba2c0a9f817fca72c88324bbe6004766fb7d
The macro block mode info context originally contained an
entry for each 16x16 macroblock. In VP9 each entry refers
to an 8x8 region not a macro block, so the naming is misleading.
This first stage clean up changes the names of 3 entries in the
structure to remove the mb_ prefix.
TODO clean up the nomenclature more widely in respect of
mbmi and bmi.
Change-Id: Ia7305c6d0cb805dfe8cdc98dad21338f502e49c6
Enable SSE2 implementation of high precision 32x32 forward DCT. The
intermediate stacks are of 32-bits. The run-time goes down from
32126 cycles to 13442 cycles.
Change-Id: Ib5ccafe3176c65bd6f2dbdef790bd47bbc880e56
Adding function build_inter_predictors_for_planes to build inter
predictors for specified planes. This function allows to remove
condition "#if CONFIG_ALPHA" and use MAX_MB_PLANE for general case.
Renaming 'which_mv' local var to 'ref', and 'weight' argument to 'ref'.
Change-Id: I1a97160c9263006929d38953f266bc68e9c56c7d
Invert loops to operate vertically in the inner loop. This allows
removing redundant loads.
Also add preloading of data.
Change-Id: I4fa85c0ab1735bcb1dd6ea58937efac949172bdc
Each iteration of the horizontal loop reuses 7 of the 11 source
values. Loading only the 4 new values saves some time.
Also add preload for source data.
Overall 4% faster on Chromebook.
Change-Id: I8f69e749f2b7f79e9734620dcee51dbfcd716b44
Loop filter configuration doesn't belong to macroblock, so moving it from
MACROBLOCKD to VP9_COMMON. Also moving the declaration of loopfilter struct
from vp9_blockd.h to vp9_loopfilter.h.
Change-Id: I4b3e34be9623b47cda35f9b1f9951f8c5b1d5d28
The memset sets 16 bytes rather than the correct size of the
final array dimension (MAX_MODE_LF_DELTAS).
(In response to bug posted by Manjit Hota to codec-devel
and webm-discuss lists)
Change-Id: I8980f5aa71ddc9d7ef57c5b4700bc28ddf8651c7
Using block width and block height instead of their logarithms. Using
SUBPEL_BITS and SUBPEL_SHIFTS constants instead of magic numbers.
Change-Id: I4e10e93c907c8a5e1cb27dfe74d1fcdcc4995448
Removing the old one bsize_from_dim_lookup. Now we have a way to determine
block size for plane using its subsampling values (ss_size_lookup). And
then we can find the number of pixels in the block (num_pels_log2_lookup).
Change-Id: I6fc981da2ae093de81741d3d78eaefed11015db9
Functions scale_mv_q4 and scale_mv_q3_to_q4 were almost identical except
q3->q4 conversion in scale_mv_q3_to_q4. Now q3->q4 conversion happens
directly in vp9_build_inter_predictor.
Also adding useful constants: SUBPEL_BITS and SUBPEL_MASK.
Change-Id: Ia0a6ad2ac07c45fdf95a5139ece6286c035e9639
Enable use_x86inc as a commandline option. Fix Bug with sse2 when
x86inc is disabled. Adds Sad asm protection to x86inc protection
Change-Id: Iee0f9dd235ea10e8ace512eb362ba9bebe8c9df6
There was no benefit having this function. For example, inside
read_switchable_filter_type switchable filter context was calculated twice.
Change-Id: I79cd5bf95cbc0f6d8bf91a2e32289e01b18dcff1
Converting arguments of two functions (clamp_mv_ref, lower_mv_precision)
from int_mv* to MV*. Rewriting is_inside function to make it much shorter.
Change-Id: Ie4c4cf3eccd46707c7df099ec21fb1b61c72fc7a
Support enabling it or disabling it. Moved read out to configure.sh
so that its done once instead of in make and in config.
Change-Id: I73a9190cf31de9f03e8a577f478fa522f8c01c8b
Currently the only threaded option for vp9 decode. Enabled when the
decoder config thread count is > 1.
Change-Id: I082959abac9e31aa4a38ed9fd68b94680e57f4df
This changeset allows to remove vp9_switchable_interp and
vp9_switchable_interp_map arrays and make code much clear. Actually we
still have to use these mapping but only inside read_interp_filter_type and
write_interp_filter_type functions.
Change-Id: I4026c6f8c4acefba6c81421b7bacbaa52cc45f50
Chromium does not support 32bit builds for Mac which use x86inc.asm.
Make the files which include it work if 64bit or not PIC enabled
starting with vp9_copy_sse2.asm
Consolidate these targets in vp9_rtcd_defs.sh
Change-Id: If18f0b957a611efd085a3ee7d245cf1eb91e8248
This is an attempt at rewriting vp9_find_mv_refs_idx. I believe that it gains
about 1-2% decode speed
Change-Id: Ia5359c94ce9bb43b32652890e605e9a385485c1b
Loading to single lanes in multiple registers is expensive since
it requires a read and write of each register which saturates
the register file access. Loading to single registers followed
by a separate transpose reduces this pressure.
Change-Id: I4cc35887ddbca80e5e635b50d2b1d158de9668ee
Removing assign_and_clamp_mv function, making implementation of clamp_mv
and clamp_mv2 more clear and consistent.
Change-Id: Iecd08e1c1bf0379f8314ebe01811f8253f4ade58
Adds a function to compute source variance for various
sb_types to be used for pruning mode and partition searches.
[The existing activity measure function is currently specialized
for only 16x16 MBs and needs to be updated].
Change-Id: I22a41e6f1430184201487326fdbebb9b47e6fc24
The inverse 32x32 transform detects all zero entries and skips the
computations accordingly per 8 rows in the first 1-D operation. The
function vp9_short_idct10_32x32_add performs differently and is not
used anywhere, hence removed.
Change-Id: Ic4fad422debbde7b6b6ffed47c69fbd4268a906c
This commit exploits the sparsity of quantized coefficient matrix.
It detects each 32x8 array and skip the corresponding inverse
transformation if all entries are zero.
For ped1080p at 8000 kbps, this on average reduces the runtime of
32x32 inverse 2D-DCT SSE2 function from 6256 cycles -> 5200
cycles. It makes the overall encoding process about 2% faster at
speed 0. The speed-up is more pronounceable for the decoding process.
Change-Id: If20056c3566bd117642a76f8884c83e8bc8efbcf
This commit provides special handle on 16x16 inverse 2D-DCT, where
only DC coefficient is quantized to be non-zero value.
Change-Id: I7bf71be7fa13384fab453dc8742b5b50e77a277c
Fixes a warning on MSVS 2012 where the alignment of vp9_default_iscan_8x8
didn't match between its declaration and definition.
Change-Id: I1466a15635f4b22594d705d570b7e399bfb6cf21
This commit enables a special handle for the 8x8 inverse 2D-DCT,
where only DC coefficient is quantized to be non-zero. For bus_cif
at 2000 kbps, it provides about 1% speed-up at speed 0.
Change-Id: I2523222359eec26b144cf8fd4c63a4ad63b1b011
Removing unused constants, macros, and function declarations. Using
ROUND_POWER_OF_TWO macro, vp9_zero, vp9_copy where possible. Moving
#include from *.h to *.c. Merging for loops for motion vectors.
Change-Id: Ic3bf841764a2bb177128bb3a6d7aa8f68229cd13
Add SSE2 implementation to handle the special case of inverse 2D-DCT
where only DC coefficient is non-zero.
Change-Id: I2c6a59e21e5e77b8cf39a4af5eecf4d5ade32e2f
Adding common merge_probs and merge_probs2 functions. Changing ints to
usigned ints in some places.
Change-Id: Icf088ffdea7cf5b95284a128916409bdd53506b0
Adding plane type check condition because it was always used outside of
get_tx_type_{4x4, 8x8, 16x16}.
Change-Id: I02f0bbfee8063474865bd903eb25b54d26e07230
Counts are separate from frame context. We have several frame contexts but
need only one copy of all counts.
Change-Id: I5279b0321cb450bbea7049adaa9275306a7cef7d
All filters are interpolating now, so we don't need this array, all
values from this array are evaluated to true.
Change-Id: I9af6d8219ae0eb984063cd15e4e2296374ae4961
many structures use bw and bh and they have different meanings. This cl attempts
to start this clean up and remove unneccessary 2 step look up log and then
shift operations...
also removed partition type multiple operation code in bitstream.c.
Change-Id: I7e03e552bdfc0939738e430862e3073d30fdd5db
Renamed:
MAX_MB_SEGMENTS to MAX_SEGMENTS
MB_SEG_TREE_PROBS to SEG_TREE_PROBS
The minimum unit for segmentation in the segment map
is now 8x8 so it is misleading to use MB_ as macro-block
traditionally refers to a 16x16 region.
Change-Id: I0b55a6f0426bb46dd13435fcfa5bae0a30a7fa22
Moving common encoder/decoder code to update_tx_counts. Also renaming
vp9_get_pred_probs_tx_size to get_tx_probs2 and adding get_tx_probs to
call vp9_get_pred_context_tx_size inside read_selected_tx_size only once
(twice before).
Change-Id: Ia50247f3893de88ef8e9041b0d44be44a40aaa4d
Update logic for both mode and mvref was the same, so using MODE_COUNT_SAT,
MODE_MAX_UPDATE_FACTOR, update_ct, update_ct2 for both cases. Removing
function update_tx_ct because it was identical to update_mode_ct2.
Change-Id: Iff566be27dbd6cde4c2ec04e8d988f207046b8f0
Stack the rate-distortion statistics in the sub8x8 rd loop. This allows
the encoder to skip the forward transform, quantization, and coeff cost
estimation, in the sub8x8 rd optimization search, if the motion
vector(s) are of integer pixel value, and have been tested in the
previous prediction filter type rd loops of the same block.
This gives about 2% speed-up for bus_cif at 2000 kpbs, for speed 0.
Its efficacy depends how frequently the motion search will select an
integer motion vector.
Change-Id: Iee15d4283ad4adea05522c1d40b198b127e6dd97
Adding loopfilter struct with fields from MACROBLOCKD and VP9Common.
Eventually it will be moved to vp9_loopfilter.h for better code structure.
Change-Id: Iaf5fb71c33719cdfa1b991f671caf071be9ea035
Changing fc->tx_probs back to fc->pre_tx_probs. This change actually
affects the bitstream but current test vectors work. Chrome branch is not
affected at all. Broken since:
cc662dd Adding struct tx_probs and struct tx_counts to cleanup the code.
Change-Id: I36dd4b3678e902e10aba8dd49b0012eb558c209d
Renaming vp9_sb_mv_ref_tree to vp9_inter_mode_tree, and
vp9_sb_mv_ref_encoding_array to vp9_inter_mode_encodings.
Change-Id: I0e91fbf81350d3ec5a2599064c74089b5d06133a
This prevents a duplicate memcpy of a 128-byte struct every time
set_scale_factors() is called (which is a lot), thus leading to a
decrease from 3.7 MB to 1.85 MB of struct copying per 64x64 block
RD/partition loop.
Overall, this decreases encoding time of the first 50 frames of bus
@ 1500kbps (speed 0) from 1min5.9 to 1min4.9, i.e. about a 1.5%
overall speedup. We can likely get more gains by removing the copy
of the other struct (and replacing it with an indexing) as well.
Change-Id: I3dceb7e79f71e6fe911b11cc994cf89a869dde7a
these are only used in the encoder.
frames_since_golden / frames_till_alt_ref_frame -> VP[89]_COMP
Change-Id: Ie14a6f46987bced685ddb449b85dc261caba6dfe
These arrays have constant values (no any updates). Removing two
corresponding memcpy calls. Making a little cleanup in vp9_entropymode.h
as well: removing redundant 'extern' keyword and moving all function
declarations at the end.
Change-Id: Ia16b38b46aec2e2500f5df29c40a297ae241dede
Call the individually optimized horizontal and vertical functions. This
implementation abuses the temp buffer.
This will be replaced with a custom optimized function.
Over 2x speedup.
Change-Id: I5b908d2a73d264e9810d6022bbff73207a3055dd
Removing tile_rows and tile_columns from VP9Common, removing redundant
constants MIN_TILE_WIDTH and MAX_TILE_WIDTH, changing signature of
vp9_get_tile_n_bits.
Change-Id: I8ff3104a38179b2c6900df965c144c1d6f602267
Cosmetic code changes, renaming 'flat' local var to 'mask', removing
unused field 'blim' from loopfilter_info_n and loop_filter_info structs.
Change-Id: I51e6ccf727fe361ad9a08e29e1201aa7abd4987f
This commit enables SSE2 implementation of 16x16 inverse ADST/DCT
hybrid transform. The runtime goes from 5742 cycles -> 1821 cycles.
This provides about 1% encoding speed-up at speed 0.
Change-Id: I1678d0988bf30b9efd524877705bbb3645edb17b
Making implementation of vp9_set_pred_flag_{seg_id, mbskip} consistent
with vp9_get_segment_id without using confusing sub(a, b) macro. Passing
mi_row and mi_col to functions explicitly instead of replying on
mb_to_right_edge and mb_to_bottom_edge.
Change-Id: I54c1087dd2ba9036f8ba7eb165b073e807d00435
In the prior code, the above context pointers used for entropy
decoding were initialized on the first frame, and not updated when
the frame size changed. The per-frame code which initializes the
contexts assumes that the contexts are contiguous, leading to an
incomplete initialization when the frame is smaller. This commit
updates the pointers so that the context is contigous whenever
the frame size changes.
Change-Id: I08b53e3a30c8289491212311682ff1b8028cff6c
This is a short term optimization till we work out a decoder
implementation requiring no frame border extension.
Change-Id: I02d15bfde4d926b50a4e58b393d8c4062d1be70f
Renaming flatmask4 to flat_mask4, flatmask5 to flat_mask5, hevmask to
hev_mask, filter to filter4, mbfilter to filter8, wide_mbfilter to
filter16.
Change-Id: Ic61c73e59c2eee505257584867aafac99833cea1
Change the mbfilter Neon code from executing both branches if all
vectors follow only one branch.
The code is about 5% faster when executing only one branch and about
1% slower when executing both branches.
-PS5: Remove local stack space from mbfilter.
Change-Id: I6a23f9b318a9f4568a2718b4c9348db988fe2182
This commit enables SSE2 implementation of 8x8 inverse ADST/DCT
transform. The runtime goes from 1216 cycles -> 266 cycles.
For bus_cif at 2000 kbps, the overall runtime reduces from
253707ms -> 248430ms, i.e., 2% speed-up at speed 0.
Change-Id: Ib0372e17e9162d7b11a10d653b1c8be547c878fb
Adding missed parenthesis around boolean expressions. Bitstream is changed.
Regenerating test vectors.
Change-Id: I4cc00b761e9473f92f180a9fc3a0c607f0aaae56
Super basic conversion from the other implementations. Any changes to
one should be trivial to copy over keep in sync.
Change-Id: I1720b4128e0aba4b2779e3761f6494f8a09d3ea8
this was never fleshed out in the context of VP8, for which it was
added. for VP9 it has no meaning.
Change-Id: Iba2ecc026d9e947067b96690245d337e51e26eff
Implements some of the helper functions more efficiently with
lookups rathers than branches. Modeling function is consolidated
to reduce some computations.
Also merged the two enums BLOCK_SIZE_TYPES and BlockSize into
one because there is no need to keep them separate (even though
the semantics are a little different).
No bitstream or output change.
About 0.5% speedup
Change-Id: I7d71a66e8031ddb340744dc493f22976052b8f9f
Adding segmentation struct to vp9_seg_common.h. Struct members are from
macroblockd and VP9Common structs. Moving segmentation related constants
and enums to vp9_seg_common.h.
Change-Id: I23fabc33f11a359249f5f80d161daf569d02ec03
Independent horizontal and vertical implementations.
Requires that blocks be built from 4x4 and [xy]_step_q4 == 16
6-10% improvement. CIF improved the least.
Change-Id: I137f5ceae4440adc0960bf88e4453e55a618bcda
Enable SSE2 4x4 inverse ADST/DCT transform. The runtime goes from
292 cycles down to 89 cycles. Running bus_cif at 2000 kbps, the
overall runtime of speed 0 goes from 301s to 295s (2% speed-up).
Change-Id: I24098136e7fee7ab2fbf1c11755bdf2ca37f3628
Where possible, do the 16 pixel wide filter while doing the horizontal
filtering pass. The same approach can be taken for the mbloop_filter
when that's implemented. Doing so on the vertical pass is a little more
involved, but possible.
Change-Id: I010cb505e623464247ae8f67fa25a0cdac091320
Adds a speed feature to eliminate full-rd computation if the modeled
rd or rd based on a different parameter in the same mode is already
a lot larger than the best rd yet.
Specifically, only search the sharp and smooth filters if the modeled
rd cost based on the regular filter is within a certain factor of the
best rd cost so far. Also, skip full-rd computation of non splitmv
inter modes if the modeled rd cost based on pred error is within the
same factor of the best rd cost so far.
Also adds some enhancements in the rd search for splitmv mode to
speed things up by early breakouts. Negligible impact on performance.
Resuts on derfraw300:
psnr: -0.013% with the splitmv enhancements, -0.24% with the rd
breakout feature on.
speedup: 6% with splitmv enhancements, 20% with also residual breakout
(tested on football sequence at 600 Kbps)
Change-Id: I37abc308ea9f110c1679ce649b6a7e73ab1ad5fc
This commit enables 16x16 ADST/DCT forward hybrid transform using SSE2
operations. It reduces the runtime from 5433 cycles to 1621 cycles, at
no compression performance loss.
Change-Id: I75fd7f1984e9e28846af459f810ff0d6ae125230
Replace case statement with lookup.
Small speed gain at low speed settings but at speed 2+ where the
number of motion searches etc. falls the impact rises to ~3-4%.
Change-Id: Idff639b7b302ee65e042b7bf836943ac0a06fad8
Change-Id: I5940719a4a161f8c26ac9a6753f1678494cec644
- The vp9 mbfilter C code will branch on flat and mask. This CL
will perform both branches and combine the data. A later CL will
perform a check to see if all patch will take one branch.
- These functions are about 1.75 times faster than the C code on
Nexus 7.
PS #3
- Changed all functions to dub limit, blimit, and thresh from
vld {dx[]}, freeing up r4-r6.
- Changed code to use vbif to reduce one instruction and free
up a d register.
Change-Id: I028dae0e434dc9891c3677bdb182e201ffb04777
This probably has a mildly negative impact on performance, but will
(in future commits - or possibly merged with this one) allow SIMD
implementations of individual intra prediction functions. We may
perhaps want to consider having separate functions per txfm-size
also (i.e. 4x4, 8x8, 16x16 and 32x32 intra prediction functions for
each intra prediction mode), but I haven't played much with that
yet.
Change-Id: Ie739985eee0a3fcbb7aed29ee6910fdb653ea269
In the rare case were 4x4 interior filtering was called for but no
8x8 or larger filtering takes place, the previous code was skipping
the filtering. This patch fixes the issue by including the interior
mask in the overall mask for the filter application loops.
Change-Id: I4a0b65056c64f97478827c2ff41e0914fc7779d0
Encode time for first 50 frames of bus (speed 0) @ 1500kbps goes from
2min10.9 to 2min10.5, i.e. 0.3% faster overall, basically because we
prevent the call overhead.
Change-Id: I1eab1a95dd3eae282f9b866f1f0b3dcadff073d5
intermediate_height for horizontal filtering must be at least 8
pixels to be able to do vertical filtering correctly. Currently
it can be less for small block and y_step_q4 sizes.
Change-Id: I2ee28b0591b2041c2fa9844d0ae2ff8a1a59cc21
(1) Refines the modeling function and uses that to add some speed
features. Specifically, intead of using a flag use_largest_txfm as
a speed feature, an enum tx_size_search_method is used, of which
two of the types are USE_FULL_RD and USE_LARGESTALL. Two other
new types are added:
USE_LARGESTINTRA (use largest only for intra)
USE_LARGESTINTRA_MODELINTER (use largest for intra, and model for
inter)
(2) Another change is that the framework for deciding transform type
is simplified to use a heuristic count based method rather than
an rd based method using txfm_cache. In practice the new method
is found to work just as well - with derf only -0.01 down.
The new method is more compatible with the new framework where
certain rd costs are based on full rd and certain others are
based on modeled rd or are not computed. In this patch the existing
rd based method is still kept for use in the USE_FULL_RD mode.
In the other modes, the count based method is used.
However the recommendation is to remove it eventually since the
benefit is limited, and will remove a lot of complications in
the code
(3) Finally a bug is fixed with the existing use_largest_txfm speed feature
that causes mismatches when the lossless mode and 4x4 WH transform is
forced.
Results on derf:
USE_FULL_RD: +0.03% (due to change in the tables), 0% encode time reduction
USE_LARGESTINTRA: -0.21%, 15% encode time reduction (this one is a
pretty good compromise)
USE_LARGESTINTRA_MODELINTER: -0.98%, 22% encode time reduction
(currently the benefit of modeling is limited for txfm size selection,
but keeping this enum as a placeholder) .
USE_LARGESTALL: -1.05%, 27% encode-time reduction (same as existing
use_largest_txfm speed feature).
Change-Id: I4d60a5f9ce78fbc90cddf2f97ed91d8bc0d4f936
This should significantly speedup cost_coeffs(). Basically what the
patch does is to make the neighbour arrays padded by one item to
prevent an eob check in get_coef_context(), then it populates each
col/row scan and left/top edge coefficient with two times the same
neighbour - this prevents a single/double context branch in
get_coef_context(). Lastly, it populates neighbour arrays in pixel
order (rather than scan order), so we don't have to dereference the
scantable to get the correct neighbours.
Total encoding time of first 50 frames of bus (speed 0) at 1500kbps
goes from 2min10.1 to 2min5.3, i.e. a 2.6% overall speed increase.
Change-Id: I42bcd2210fd7bec03767ef0e2945a665b851df56
Encode time of bus (speed 0) 50 frames @ 1500kbps goes from 2min14.4 to
2min10.1, i.e. a 2.3% overall speed increase.
Change-Id: I3699580e74ec26c7d24e03681bc47ba25ee1ee87
Total encoding time for first 50 frames of bus (speed 0) @ 1500kbps
goes 2min34.8 to 2min14.4, i.e. a 10.4% overall speedup. The code is
x86-64 only, it needs some minor modifications to be 32bit compatible,
because it uses 15 xmm registers, whereas 32bit only has 8.
Change-Id: I2df53770c2e850813ffa713e1a91b45b0082b904
since:
92479d9 Make update_partition_context faster
fixes:
vp9/common/vp9_blockd.h:408:22: error:
non-constant-expression cannot be narrowed from type 'int' to 'char' in
initializer list [-Wc++11-narrowing]
char pcvalue[2] = {~(0xe << boffset), ~(0xf <<boffset)};
^~~~~~~~~~~~~~~~~
Change-Id: Id5b00b9a72d00a2b314081a23879bd1fa3ce983b
This commit enables SSE2 4x4 foward hybrid transform. The runtime
goes from 249 cycles down to 74 cycles. Overall around 2% speed-up
at no compression performance change.
Change-Id: Iad4d526346e05c7be896466c05500711bb763660
Makes cost_coeffs() a lot faster:
4x4: 236 -> 181 cycles
8x8: 888 -> 588 cycles
16x16: 3550 -> 2483 cycles
32x32: 17392 -> 12010 cycles
Total encode time of first 50 frames of bus (speed 0) @ 1500kbps goes
from 2min51.6 to 2min43.9, i.e. 4.7% overall speedup.
Change-Id: I16b8d595946393c8dc661599550b3f37f5718896
Adding CHECK_MEM_ERROR macro to vp9_common.h and removing two duplicated
ones from vp9_onyx_int.h and vp9_onyxd_int.h.
Change-Id: I916afec61b3019f18193135dac7c35ed0f89b8b6
This commit replaces zrun_zbin_boost, a method of biasing non-zero
coefficients following runs of zero-coefficients to be rounded towards
zero, with an explicit skip-block choice in the RD loop.
The logic is basically that if individual coefficients should be rounded
towards zero (from a RD point of view), the trellis/optimize loop should
take care of it. If whole blocks should be zero (from a RD point of
view), a single RD check is much more efficient than a complete
serialization of the quantization loop.
Quality change: derf +0.5% psnr, +1.6% ssim; yt +0.6% psnr, +1.1% ssim.
SIMD for quantize will follow in a separate patch. Results for other
test sets pending.
Change-Id: Ife5fa641163ac5150ac428011e87188f1937c1f4
Using vp9_set_pred_flag function instead of custom code, adding
decode_tokens function which is now called from decode_atom,
decode_sb_intra, and decode_sb.
Change-Id: Ie163a7106c0241099da9c5fe03069bd71f9d9ff8
- Added vp9_loop_filter_horizontal_edge_neon and
vp9_loop_filter_vertical_edge_neon.
- The functions are based off the vp8 loopfilter
functions.
- Matches x86 md5 checksum.
Change-Id: Id1c4dddb03584227e5ecd29f574a6ac27738fdd0
This commit enables configurable reference buffer pointer for intra
predictor. This allows later removal of spatial dependency between
blocks inside a 64x64 superblock in the rate-distortion optimization
loop.
Change-Id: I02418c2077efe19adc86e046a6b49364a980f5b1
Use vpx_memset for updating the partition contexts. Thanks to Noah
for pointing out the need of refactoring in this part.
Change-Id: I67fb78429d632298f1cd8a0be346cc76f79392a6
Makes first 50 frames of bus @ 1500kbps encode from 3min22.7 to 3min18.2,
i.e. 2.3% faster. In addition, use the sub_pixel_avg functions to calc
the variance of the averaging predictor. This is slightly suboptimal
because the function is subpixel-position-aware, but it will (at least
for the SSE2 version) not actually use a bilinear filter for a full-pixel
position, thus leading to approximately the same performance compared to
if we implemented an actual average-aware full-pixel variance function.
That gains another 0.3 seconds (i.e. encode time goes to 3min17.4), thus
leading to a total gain of 2.7%.
Change-Id: I3f059d2b04243921868cfed2568d4fa65d7b5acd
This commit makes use of the butterfly structure to enable the sse2
version implementation of 8x8 ADST/DCT hybrid transform coding.
The runtime of hybrid transform module goes down from 1170 cycles
to 245 cycles. Overall speed-up around 1.5%.
Change-Id: Ic808ffd21ece8a9d0410d8c0243d7b6c28ac3b3f
This reduced the size of the MODE_INFO array (mip and prev_mip)
by 425,568 bytes each for 1080p resolutions.
Change-Id: Ifa513ec2d0a49e8ec0867ec90620762fb7f1261d
For cases where there's no transform set in bit 0 (the left edge of
the SB) but bit 0 of mask_4x4_int is set (the edge 4 pixels from the
left edge needs filtering), it was incorrectly being skipped before.
This situation only happens on the leftmost edge of the image, as
the edge at column 0 is intentionally skipped since there aren't
pixels to the left to read.
Change-Id: Ib2fbbcb40166e90af31b1a0e13b85b68c226cbd3
Change vp9_block_error() to return a 64bit error variable, change all
callers to expect a 64bit return value (this will prevent overflows,
which we basically don't check for at all right now). Remove duplicate
block_error() function, which fixed that through truncation. Remove
old (incompatible) mmx/sse2 block_error SIMD versions and replace with
a new one that returns a 64bit value.
Encoding time of first 50 frames of bus @ 1500kbps goes from 3min29 to
3min23, i.e. a 3% overall speedup.
Change-Id: Ib71ac5508b5ee8a80f1753cd85d72df1629abe68
Encoding of bus @ 1500kbps (first 50 frames) goes from 3min57 to
3min35, i.e. approximately a 10.5% speedup. Note that the SIMD versions
which use a bilinear filter (x_offset & 7 || y_offset & 7) aren't
perfectly interleaved, and can probably be improved further in the
future. I've marked this with a few TODOs/FIXMEs in the code.
Change-Id: I5c9e900c0f0d32e431a50fecae213b510b2549f9
The new print out includes skips and has prefixed sections so you can
grep to find things like transforms chosen on each frame.
Change-Id: I195043424647d9514cfc3ff6720a5b20d010fa1b
This commit makes use of dual fdct32x32 versions for rate-distortion
optimization loop and encoding process, respectively. The one for
rd loop requires only 16 bits precision for intermediate steps.
The original fdct32x32 that allows higher intermediate precision (18
bits) was retained for the encoding process only.
This allows speed-up for fdct32x32 in the rd loop. No performance
loss observed.
Change-Id: I3237770e39a8f87ed17ae5513c87228533397cc3
This seems to only be used in the encoder. Also remove an empty wrapper
file that contained forward declarations for this function, but didn't
actually define any actual functions.
Change-Id: Ifc561eef7ebe374a7d03698055e51e105f6d614b
vp9_default_inter_mode_probs was being accessed with a different type
than it was defined with. Ensure that its declaration is included
prior to its definition.
Change-Id: I2f963f513ab2f4e339f8a3c17e3d0f03749eba16
All elements of this table are equal to 252, so replace it with a
single constant VP9_COEF_UPDATE_PROB.
Change-Id: I1e2d1d284326ce6df9899a740c2fc344b3ec81c9
The encoding time for bus at CIF goes from 661s to 625s. This commit
also enabled unit test of sad8x4/4x8 in sad_test.cc.
Change-Id: If3d10ebb56bda584bdb69bcf056599d580b12cb1
The encoding time for bus at CIF goes from 661s to 625s. This commit
also enabled unit test of sad8x4/4x8 in sad_test.cc.
Change-Id: If3d10ebb56bda584bdb69bcf056599d580b12cb1
Modified to work with 8x8 blocks of memory. Will revisit
later for further optimizations. For the HD clip used, the
decoder improved by almost 20%.
Change-Id: Iaa4785be293a32a42e8db07141bd699f504b8c67
Modified to work with 8x8 blocks of memory. Will revisit
later for further optimizations. For the HD clip used, the
decoder improved my 20%.
Change-Id: Ia0057f55d66d1445882351ea6c43b595a5a980e5
This commit fixed the allowable partition types for bottom-right
corner blocks.
When a block has over half of its pixels as valid content in both
vertical and horizontal directions, allow all the four partition
types in the bit-stream. Otherwise, apply partition type constraints.
Change-Id: I2252e2de7125a8bfb1c824bf34299a13c81102e3
* New probs for subpel filters/tx_count
* Makes a change to not reset to defaults for the tx_size
probs if an intermediate frame reverts to using a fixed tx_size.
* A few updates to the parameters for backward adaptation for mode/mv
* some cosmetic cleanups
derf300: +0.06%
Change-Id: I22994d659bc31ca7a4fc8820fde24001e64a2920
Remove the bilinear filter mode, and the no-loopfilter mode, and the
related vp9_setup_version() function.
Change-Id: I32311367812faf37863131df3af37d63d03973d7
This commit has no impact but to help us debug issues. To Use call like
this:
vp9_print_modes_and_motion_vectors(cpi->common.mi, cpi->common.mi_rows,
cpi->common.mi_cols,
cpi->common.current_video_frame,
"decode_mi.stt");
Change-Id: I89e27725dae351370eb7f311a20a145ed4f1d041
No bitstream change.
Removes unused filters and the code for the case of 2 switchable filters;
also changes the 8tap-smooth filter coefficients for integer shifts to be
interpolating to be consistent with the way it is implemented currently.
Change-Id: I96c542fd8c06f4e0df507a645976f58e6de92aae
Implements ability to signal and decode frames that are
encoded using only intra coding modes. Only the decode
side has been implemented here.
Change-Id: I53ac6a8d90422cd08ba389e5236e15b45f9e93de
Change the argument of get_uv_tx_size() to be an MBMI pointer, so that the
correct column's MBMI can be passed to the function.
Change-Id: Ied6b8ec33b77cdd353119e8fd2d157811815fc98
Fixed point scaling factors are calculated once for each
reference frame by using integer division. Otherwise fixed point
scaling routines are used in all scaling calculations. This makes it
possible to calculate fixed point scaling factors on device driver
software and pass them to hardware and thus avoid division on hardware.
TODO:
- Missing check for maximum frame dimensions
(currently scaling uses 14 bits)
- Missing check for maximum scaling ratio
(upscaling 16:1, downscaling 2:1)
Problems:
- Straightforward fixed point implementation can cause error +-1
compared to integer division (i.e. in x_step_q4). Should only
be an issue for frames larger than 16k.
Change-Id: I3cf4dabd610a4dc18da3bdb31ae244ebaf5d579c
Was always using sb_type of first column in a row of 8x8 units when
determining decoded block edges as a subcondition for loop filter
skipping.
Change-Id: Ib17554633a63a90b70cdaa7bed65db035a8ad9d8
Reduces TX_SIZE contexts to 2 for each kind. The code is
cleaner and there is hardly any performance difference with
more than two contexts.
Results: almost neutral
Change-Id: I17656bd6db76224ae2856adf882504560e7dbaa4
Made changes to the frame header to write the sync
code in the frame header for a non-displayable,
intra-only frame.
Extended reset_frame_context to 2-bits.
(Submitting on behalf of Dmitri)
Change-Id: Ie836ae0df9ed572fb4f08aabe9351a555c4f3b96
Adds coding of transform size within a frame by use of context
of transform sizes selected in left and above blocks.
Also incorporates code for generating stats.
TODO: generate and incorporate new default stats
Change-Id: I6a7af099f6ad61d448521d9a51167aedaf638ed6
Refactors mbskip coding to be compatible with coding of the rest of
the symbols. Adds forward/backward adaptation and removes a lot of
the legacy code.
Results:
fast50: +1.6%
derfraw300: +0.317%
Change-Id: I395a2976d15af044d3b8ded5acfa45f6f065f980
The partition types of blocks sitting on the frame boundary are
constrained by the block size and the position of each sub-block
relative to the frame. Hence we use truncated probability models
to handle the coding of such information.
100 frames run:
yt 0.138%
Change-Id: I85d9b45665c15280069c0234ea6f778af586d87d
This can only happen if partition is partly out-of-frame, in which
case the referenced mv is either out-of-frame also (and thus has the
same value as an already-read one), or it is actually uninitialized,
in which case we don't want to use it.
Change-Id: Icf39fa4d987c7abcbebb9bbdcdd6311e8fb9d3c9
With the removal of i4X4 and SPLIT_MV modes, the two entries for the
modes are no longer used. This patch remove the coding of the deltas.
Change-Id: Iea4eb500404ebe9706159380a03b8eca542fb4c3
Changes to the coding of transform sizes, along with forward
and backward probability updates.
Results:
derf300: +0.241%
Context based coding of transform sizes will be in a separate
patch.
Change-Id: I97241d60a926f014fee2de21fa4446ca56495756
Added condition to not to skip filtering of transform block edges when
the edge is also a decoding block edge.
Change-Id: Iaccb6206c4202b78e5dca3b89379556e0f4aba0c
Wrong max data size (skip has no data) and use of vp9_get_segdata()
when it should be vp9_segfeature_active().
Change-Id: I1eb97d33df6e2a42cc589049f704266fe3639902
ref_frame in MB_Mode_Info was changed in the ref frame coding patch
to be an array to handle first and second reference frame, this patch
fix the loop filter code that use the pointer directly as reference
frame.
Change-Id: I71afa5a49deb50c1bc38029fd07470b984c6dfe9
Code intra/inter, then comp/single, then the ref frame selection.
Use contextualization for all steps. Don't code two past frames
in comp pred mode.
Change-Id: I4639a78cd5cccb283023265dbcc07898c3e7cf95
Split partition probabilities between keyframes and non-keyframes,
since they are fairly different. Also have per-blocksize interframe
y intramode probabilities, since these vary heavily between different
blocksizes.
Lastly, replace default probabilities for partitioning and intra modes
with new ones generated from current codec. Replace counts with actual
probabilities also.
Change-Id: I77ca996e25e4a28e03bdbc542f27a3e64ca1234f
This version of the loop filter supports non-4:2:0 subsampling and
a fourth plane, as well as changing the filtering order to be more
friendly to hardware implementations.
The filters are applied first to all vertical edges within the
64x64 SB, followed by the top horizontal edge and any internal
horizontal edges. Since filtering is applied on each 4x4 edge
serially, a dependency is created from filtering one block edge
to the next. It would be possible to remove this depencnecy by
building all filtering decisions from the unfiltered
reconstruction data.
Change-Id: I08f3e9683eb7bded8a76651cbc50fc0dfdd05fa7
This avoids encoding tokens for blocks that are entirely
in the UMV border. This changes the bitstream.
Change-Id: I32b4df46ac8a990d0c37cee92fd34f8ddd4fb6c9
This commit makes the coding/reconstruction operations of intra
coding rate-distortion loop for UV components consistent with those
of the encoding process.
key frame coding gains:
derf: 0.11%
stdhd: 0.42%
Change-Id: I8d49f83924a320e3689ef2d60096c49d7f0c7a40
Adds backward adaptation and differential forward updates of switchable
interpolation filter probabilities. Also adds some cosmetic cleanups
and minor fixes on mv_ref probabilities.
derfraw300: +0.353% (with most coming from switchable interp changes)
Change-Id: Ie2718be73528c945fd0d80cfd63ca2d9cb3032de
Restrict get_matching_candidate() to considering
mvs at 8x8 and larger sizes for last frame case.
This is to reduce the HW load of using vectors down
to the 4x4 level from the previous frame.
Change-Id: I6505e610fd63a4e22d67f136aec7905a01b893ba
This speed 1 - uses variance threshold stolen from static-thresh
to determine split. Any superblock with greater than the variance
set by static thresh * quantizer index squared is split. In addition
transform size is set to largest size less than or equal to partition
size, sub pixel filter is set to normal, and only 12 modes are used
at all.
Change-Id: If7a2858ee70f96d1eb989c04fd87a332b147abef
We leave it in rdopt.c as a local define for now - this can be removed
later. In all other places, we remove it, thereby slightly decreasing
the size of some arrays in the bitstream.
Change-Id: Ic2a9beb97a4eda0b086f62c039d994b192f99ca5
It remains as a local define in rdopt.c so we can distinguish between
split and non-split modes in the RD loop, but disappears outside that
scope in the codec.
Change-Id: I98c18fe5ab7e4fbd1d6620ec5695e2ea20513ce9
The commit changed to use a new variant of Walsh-Hadamard Transform
by Tim Terriberry. This new variant has the best compression among a
number of variants that developed by Tim.
Change-Id: Icb3a88515463cfc644b17ca046fcd139db2557e9
The first 240 coeff positions (15 top-left blocks) are scanned in the
same order as in scatter scan, after that the coeffs are scanned in
"block bands", each band at a time, all coeffs in one band before
moving on to the next band. This brings down the amount of 4x4 coeff
blocks that need to be buffered while scanning, from 15 blocks to 8 blocks.
Change-Id: I478a991d63c48bd5e64d36e59fed7a00c9a651ba
This patch removes the implicit segmentation
experiment from the code base as the benefits
were still unproven as of the bitstream deadline.
Change-Id: I273b99d8d621d1853eac4182f97982cb5957247e
