Build fips_premain_dso.exe in static build too.

instead of those from mingw build.

Visual Studio Express 2005 doesn't like fips_premain_dso.exe from mingw used
against its DLLs.

.cvsignore

@@ -1,5 +1,5 @@
 openssl.pc
-Makefile.ssl
+Makefile
 MINFO
 makefile.one
 tmp
@@ -14,3 +14,7 @@ cctest.c
 cctest.a
 libcrypto.so.*
 libssl.so.*
+libcrypto.sha1
+libcrypto.a.sha1
+*.flc
+semantic.cache

CHANGES

@@ -2,7 +2,445 @@
  OpenSSL CHANGES
  _______________
 
- Changes between 0.9.6h and 0.9.7  [XX xxx 2002]
+ Changes between 0.9.7i and 0.9.7j  [XX xxx XXXX]
+
+  *) Add new Windows build target VC-32-GMAKE for VC++. This uses GNU make 
+     from a Windows bash shell such as MSYS. It is autodetected from the
+     "config" script when run from a VC++ environment. Modify standard VC++
+     build to use fipscanister.o from the GNU make build. 
+     [Steve Henson]
+
+ Changes between 0.9.7h and 0.9.7i  [14 Oct 2005]
+
+  *) Wrapped the definition of EVP_MAX_MD_SIZE in a #ifdef OPENSSL_FIPS.
+     The value now differs depending on if you build for FIPS or not.
+     BEWARE!  A program linked with a shared FIPSed libcrypto can't be
+     safely run with a non-FIPSed libcrypto, as it may crash because of
+     the difference induced by this change.
+     [Andy Polyakov]
+
+ Changes between 0.9.7g and 0.9.7h  [11 Oct 2005]
+
+  *) Remove the functionality of SSL_OP_MSIE_SSLV2_RSA_PADDING
+     (part of SSL_OP_ALL).  This option used to disable the
+     countermeasure against man-in-the-middle protocol-version
+     rollback in the SSL 2.0 server implementation, which is a bad
+     idea.  (CVE-2005-2969)
+
+     [Bodo Moeller; problem pointed out by Yutaka Oiwa (Research Center
+     for Information Security, National Institute of Advanced Industrial
+     Science and Technology [AIST], Japan)]
+
+  *) Minimal support for X9.31 signatures and PSS padding modes. This is
+     mainly for FIPS compliance and not fully integrated at this stage.
+     [Steve Henson]
+
+  *) For DSA signing, unless DSA_FLAG_NO_EXP_CONSTTIME is set, perform
+     the exponentiation using a fixed-length exponent.  (Otherwise,
+     the information leaked through timing could expose the secret key
+     after many signatures; cf. Bleichenbacher's attack on DSA with
+     biased k.)
+     [Bodo Moeller]
+
+  *) Make a new fixed-window mod_exp implementation the default for
+     RSA, DSA, and DH private-key operations so that the sequence of
+     squares and multiplies and the memory access pattern are
+     independent of the particular secret key.  This will mitigate
+     cache-timing and potential related attacks.
+
+     BN_mod_exp_mont_consttime() is the new exponentiation implementation,
+     and this is automatically used by BN_mod_exp_mont() if the new flag
+     BN_FLG_EXP_CONSTTIME is set for the exponent.  RSA, DSA, and DH
+     will use this BN flag for private exponents unless the flag
+     RSA_FLAG_NO_EXP_CONSTTIME, DSA_FLAG_NO_EXP_CONSTTIME, or
+     DH_FLAG_NO_EXP_CONSTTIME, respectively, is set.
+
+     [Matthew D Wood (Intel Corp), with some changes by Bodo Moeller]
+
+  *) Change the client implementation for SSLv23_method() and
+     SSLv23_client_method() so that is uses the SSL 3.0/TLS 1.0
+     Client Hello message format if the SSL_OP_NO_SSLv2 option is set.
+     (Previously, the SSL 2.0 backwards compatible Client Hello
+     message format would be used even with SSL_OP_NO_SSLv2.)
+     [Bodo Moeller]
+
+  *) Add support for smime-type MIME parameter in S/MIME messages which some
+     clients need.
+     [Steve Henson]
+
+  *) New function BN_MONT_CTX_set_locked() to set montgomery parameters in
+     a threadsafe manner. Modify rsa code to use new function and add calls
+     to dsa and dh code (which had race conditions before).
+     [Steve Henson]
+
+  *) Include the fixed error library code in the C error file definitions
+     instead of fixing them up at runtime. This keeps the error code
+     structures constant.
+     [Steve Henson]
+
+ Changes between 0.9.7f and 0.9.7g  [11 Apr 2005]
+
+  [NB: OpenSSL 0.9.7h and later 0.9.7 patch levels were released after
+  OpenSSL 0.9.8.]
+
+  *) Fixes for newer kerberos headers. NB: the casts are needed because
+     the 'length' field is signed on one version and unsigned on another
+     with no (?) obvious way to tell the difference, without these VC++
+     complains. Also the "definition" of FAR (blank) is no longer included
+     nor is the error ENOMEM. KRB5_PRIVATE has to be set to 1 to pick up
+     some needed definitions.
+     [Steve Henson]
+
+  *) Undo Cygwin change.
+     [Ulf M<>ller]
+
+  *) Added support for proxy certificates according to RFC 3820.
+     Because they may be a security thread to unaware applications,
+     they must be explicitely allowed in run-time.  See
+     docs/HOWTO/proxy_certificates.txt for further information.
+     [Richard Levitte]
+
+ Changes between 0.9.7e and 0.9.7f  [22 Mar 2005]
+
+  *) Use (SSL_RANDOM_VALUE - 4) bytes of pseudo random data when generating
+     server and client random values. Previously
+     (SSL_RANDOM_VALUE - sizeof(time_t)) would be used which would result in
+     less random data when sizeof(time_t) > 4 (some 64 bit platforms).
+
+     This change has negligible security impact because:
+
+     1. Server and client random values still have 24 bytes of pseudo random
+        data.
+
+     2. Server and client random values are sent in the clear in the initial
+        handshake.
+
+     3. The master secret is derived using the premaster secret (48 bytes in
+        size for static RSA ciphersuites) as well as client server and random
+        values.
+
+     The OpenSSL team would like to thank the UK NISCC for bringing this issue
+     to our attention. 
+
+     [Stephen Henson, reported by UK NISCC]
+
+  *) Use Windows randomness collection on Cygwin.
+     [Ulf M<>ller]
+
+  *) Fix hang in EGD/PRNGD query when communication socket is closed
+     prematurely by EGD/PRNGD.
+     [Darren Tucker <dtucker@zip.com.au> via Lutz J<>nicke, resolves #1014]
+
+  *) Prompt for pass phrases when appropriate for PKCS12 input format.
+     [Steve Henson]
+
+  *) Back-port of selected performance improvements from development
+     branch, as well as improved support for PowerPC platforms.
+     [Andy Polyakov]
+
+  *) Add lots of checks for memory allocation failure, error codes to indicate
+     failure and freeing up memory if a failure occurs.
+     [Nauticus Networks SSL Team <openssl@nauticusnet.com>, Steve Henson]
+
+  *) Add new -passin argument to dgst.
+     [Steve Henson]
+
+  *) Perform some character comparisons of different types in X509_NAME_cmp:
+     this is needed for some certificates that reencode DNs into UTF8Strings
+     (in violation of RFC3280) and can't or wont issue name rollover
+     certificates.
+     [Steve Henson]
+
+  *) Make an explicit check during certificate validation to see that
+     the CA setting in each certificate on the chain is correct.  As a
+     side effect always do the following basic checks on extensions,
+     not just when there's an associated purpose to the check:
+
+      - if there is an unhandled critical extension (unless the user
+        has chosen to ignore this fault)
+      - if the path length has been exceeded (if one is set at all)
+      - that certain extensions fit the associated purpose (if one has
+        been given)
+     [Richard Levitte]
+
+ Changes between 0.9.7d and 0.9.7e  [25 Oct 2004]
+
+  *) Avoid a race condition when CRLs are checked in a multi threaded 
+     environment. This would happen due to the reordering of the revoked
+     entries during signature checking and serial number lookup. Now the
+     encoding is cached and the serial number sort performed under a lock.
+     Add new STACK function sk_is_sorted().
+     [Steve Henson]
+
+  *) Add Delta CRL to the extension code.
+     [Steve Henson]
+
+  *) Various fixes to s3_pkt.c so alerts are sent properly.
+     [David Holmes <d.holmes@f5.com>]
+
+  *) Reduce the chances of duplicate issuer name and serial numbers (in
+     violation of RFC3280) using the OpenSSL certificate creation utilities.
+     This is done by creating a random 64 bit value for the initial serial
+     number when a serial number file is created or when a self signed
+     certificate is created using 'openssl req -x509'. The initial serial
+     number file is created using 'openssl x509 -next_serial' in CA.pl
+     rather than being initialized to 1.
+     [Steve Henson]
+
+ Changes between 0.9.7c and 0.9.7d  [17 Mar 2004]
+
+  *) Fix null-pointer assignment in do_change_cipher_spec() revealed           
+     by using the Codenomicon TLS Test Tool (CVE-2004-0079)                    
+     [Joe Orton, Steve Henson]   
+
+  *) Fix flaw in SSL/TLS handshaking when using Kerberos ciphersuites
+     (CVE-2004-0112)
+     [Joe Orton, Steve Henson]   
+
+  *) Make it possible to have multiple active certificates with the same
+     subject in the CA index file.  This is done only if the keyword
+     'unique_subject' is set to 'no' in the main CA section (default
+     if 'CA_default') of the configuration file.  The value is saved
+     with the database itself in a separate index attribute file,
+     named like the index file with '.attr' appended to the name.
+     [Richard Levitte]
+
+  *) X509 verify fixes. Disable broken certificate workarounds when 
+     X509_V_FLAGS_X509_STRICT is set. Check CRL issuer has cRLSign set if
+     keyUsage extension present. Don't accept CRLs with unhandled critical
+     extensions: since verify currently doesn't process CRL extensions this
+     rejects a CRL with *any* critical extensions. Add new verify error codes
+     for these cases.
+     [Steve Henson]
+
+  *) When creating an OCSP nonce use an OCTET STRING inside the extnValue.
+     A clarification of RFC2560 will require the use of OCTET STRINGs and 
+     some implementations cannot handle the current raw format. Since OpenSSL
+     copies and compares OCSP nonces as opaque blobs without any attempt at
+     parsing them this should not create any compatibility issues.
+     [Steve Henson]
+
+  *) New md flag EVP_MD_CTX_FLAG_REUSE this allows md_data to be reused when
+     calling EVP_MD_CTX_copy_ex() to avoid calling OPENSSL_malloc(). Without
+     this HMAC (and other) operations are several times slower than OpenSSL
+     < 0.9.7.
+     [Steve Henson]
+
+  *) Print out GeneralizedTime and UTCTime in ASN1_STRING_print_ex().
+     [Peter Sylvester <Peter.Sylvester@EdelWeb.fr>]
+
+  *) Use the correct content when signing type "other".
+     [Steve Henson]
+
+ Changes between 0.9.7b and 0.9.7c  [30 Sep 2003]
+
+  *) Fix various bugs revealed by running the NISCC test suite:
+
+     Stop out of bounds reads in the ASN1 code when presented with
+     invalid tags (CVE-2003-0543 and CVE-2003-0544).
+     
+     Free up ASN1_TYPE correctly if ANY type is invalid (CVE-2003-0545).
+
+     If verify callback ignores invalid public key errors don't try to check
+     certificate signature with the NULL public key.
+
+     [Steve Henson]
+
+  *) New -ignore_err option in ocsp application to stop the server
+     exiting on the first error in a request.
+     [Steve Henson]
+
+  *) In ssl3_accept() (ssl/s3_srvr.c) only accept a client certificate
+     if the server requested one: as stated in TLS 1.0 and SSL 3.0
+     specifications.
+     [Steve Henson]
+
+  *) In ssl3_get_client_hello() (ssl/s3_srvr.c), tolerate additional
+     extra data after the compression methods not only for TLS 1.0
+     but also for SSL 3.0 (as required by the specification).
+     [Bodo Moeller; problem pointed out by Matthias Loepfe]
+
+  *) Change X509_certificate_type() to mark the key as exported/exportable
+     when it's 512 *bits* long, not 512 bytes.
+     [Richard Levitte]
+
+  *) Change AES_cbc_encrypt() so it outputs exact multiple of
+     blocks during encryption.
+     [Richard Levitte]
+
+  *) Various fixes to base64 BIO and non blocking I/O. On write 
+     flushes were not handled properly if the BIO retried. On read
+     data was not being buffered properly and had various logic bugs.
+     This also affects blocking I/O when the data being decoded is a
+     certain size.
+     [Steve Henson]
+
+  *) Various S/MIME bugfixes and compatibility changes:
+     output correct application/pkcs7 MIME type if
+     PKCS7_NOOLDMIMETYPE is set. Tolerate some broken signatures.
+     Output CR+LF for EOL if PKCS7_CRLFEOL is set (this makes opening
+     of files as .eml work). Correctly handle very long lines in MIME
+     parser.
+     [Steve Henson]
+
+ Changes between 0.9.7a and 0.9.7b  [10 Apr 2003]
+
+  *) Countermeasure against the Klima-Pokorny-Rosa extension of
+     Bleichbacher's attack on PKCS #1 v1.5 padding: treat
+     a protocol version number mismatch like a decryption error
+     in ssl3_get_client_key_exchange (ssl/s3_srvr.c).
+     [Bodo Moeller]
+
+  *) Turn on RSA blinding by default in the default implementation
+     to avoid a timing attack. Applications that don't want it can call
+     RSA_blinding_off() or use the new flag RSA_FLAG_NO_BLINDING.
+     They would be ill-advised to do so in most cases.
+     [Ben Laurie, Steve Henson, Geoff Thorpe, Bodo Moeller]
+
+  *) Change RSA blinding code so that it works when the PRNG is not
+     seeded (in this case, the secret RSA exponent is abused as
+     an unpredictable seed -- if it is not unpredictable, there
+     is no point in blinding anyway).  Make RSA blinding thread-safe
+     by remembering the creator's thread ID in rsa->blinding and
+     having all other threads use local one-time blinding factors
+     (this requires more computation than sharing rsa->blinding, but
+     avoids excessive locking; and if an RSA object is not shared
+     between threads, blinding will still be very fast).
+     [Bodo Moeller]
+
+  *) Fixed a typo bug that would cause ENGINE_set_default() to set an
+     ENGINE as defaults for all supported algorithms irrespective of
+     the 'flags' parameter. 'flags' is now honoured, so applications
+     should make sure they are passing it correctly.
+     [Geoff Thorpe]
+
+  *) Target "mingw" now allows native Windows code to be generated in
+     the Cygwin environment as well as with the MinGW compiler.
+     [Ulf Moeller] 
+
+ Changes between 0.9.7 and 0.9.7a  [19 Feb 2003]
+
+  *) In ssl3_get_record (ssl/s3_pkt.c), minimize information leaked
+     via timing by performing a MAC computation even if incorrrect
+     block cipher padding has been found.  This is a countermeasure
+     against active attacks where the attacker has to distinguish
+     between bad padding and a MAC verification error. (CVE-2003-0078)
+
+     [Bodo Moeller; problem pointed out by Brice Canvel (EPFL),
+     Alain Hiltgen (UBS), Serge Vaudenay (EPFL), and
+     Martin Vuagnoux (EPFL, Ilion)]
+
+  *) Make the no-err option work as intended.  The intention with no-err
+     is not to have the whole error stack handling routines removed from
+     libcrypto, it's only intended to remove all the function name and
+     reason texts, thereby removing some of the footprint that may not
+     be interesting if those errors aren't displayed anyway.
+
+     NOTE: it's still possible for any application or module to have it's
+     own set of error texts inserted.  The routines are there, just not
+     used by default when no-err is given.
+     [Richard Levitte]
+
+  *) Add support for FreeBSD on IA64.
+     [dirk.meyer@dinoex.sub.org via Richard Levitte, resolves #454]
+
+  *) Adjust DES_cbc_cksum() so it returns the same value as the MIT
+     Kerberos function mit_des_cbc_cksum().  Before this change,
+     the value returned by DES_cbc_cksum() was like the one from
+     mit_des_cbc_cksum(), except the bytes were swapped.
+     [Kevin Greaney <Kevin.Greaney@hp.com> and Richard Levitte]
+
+  *) Allow an application to disable the automatic SSL chain building.
+     Before this a rather primitive chain build was always performed in
+     ssl3_output_cert_chain(): an application had no way to send the 
+     correct chain if the automatic operation produced an incorrect result.
+
+     Now the chain builder is disabled if either:
+
+     1. Extra certificates are added via SSL_CTX_add_extra_chain_cert().
+
+     2. The mode flag SSL_MODE_NO_AUTO_CHAIN is set.
+
+     The reasoning behind this is that an application would not want the
+     auto chain building to take place if extra chain certificates are
+     present and it might also want a means of sending no additional
+     certificates (for example the chain has two certificates and the
+     root is omitted).
+     [Steve Henson]
+
+  *) Add the possibility to build without the ENGINE framework.
+     [Steven Reddie <smr@essemer.com.au> via Richard Levitte]
+
+  *) Under Win32 gmtime() can return NULL: check return value in
+     OPENSSL_gmtime(). Add error code for case where gmtime() fails.
+     [Steve Henson]
+
+  *) DSA routines: under certain error conditions uninitialized BN objects
+     could be freed. Solution: make sure initialization is performed early
+     enough. (Reported and fix supplied by Ivan D Nestlerode <nestler@MIT.EDU>,
+     Nils Larsch <nla@trustcenter.de> via PR#459)
+     [Lutz Jaenicke]
+
+  *) Another fix for SSLv2 session ID handling: the session ID was incorrectly
+     checked on reconnect on the client side, therefore session resumption
+     could still fail with a "ssl session id is different" error. This
+     behaviour is masked when SSL_OP_ALL is used due to
+     SSL_OP_MICROSOFT_SESS_ID_BUG being set.
+     Behaviour observed by Crispin Flowerday <crispin@flowerday.cx> as
+     followup to PR #377.
+     [Lutz Jaenicke]
+
+  *) IA-32 assembler support enhancements: unified ELF targets, support
+     for SCO/Caldera platforms, fix for Cygwin shared build.
+     [Andy Polyakov]
+
+  *) Add support for FreeBSD on sparc64.  As a consequence, support for
+     FreeBSD on non-x86 processors is separate from x86 processors on
+     the config script, much like the NetBSD support.
+     [Richard Levitte & Kris Kennaway <kris@obsecurity.org>]
+
+ Changes between 0.9.6h and 0.9.7  [31 Dec 2002]
+
+  [NB: OpenSSL 0.9.6i and later 0.9.6 patch levels were released after
+  OpenSSL 0.9.7.]
+
+  *) Fix session ID handling in SSLv2 client code: the SERVER FINISHED
+     code (06) was taken as the first octet of the session ID and the last
+     octet was ignored consequently. As a result SSLv2 client side session
+     caching could not have worked due to the session ID mismatch between
+     client and server.
+     Behaviour observed by Crispin Flowerday <crispin@flowerday.cx> as
+     PR #377.
+     [Lutz Jaenicke]
+
+  *) Change the declaration of needed Kerberos libraries to use EX_LIBS
+     instead of the special (and badly supported) LIBKRB5.  LIBKRB5 is
+     removed entirely.
+     [Richard Levitte]
+
+  *) The hw_ncipher.c engine requires dynamic locks.  Unfortunately, it
+     seems that in spite of existing for more than a year, many application
+     author have done nothing to provide the necessary callbacks, which
+     means that this particular engine will not work properly anywhere.
+     This is a very unfortunate situation which forces us, in the name
+     of usability, to give the hw_ncipher.c a static lock, which is part
+     of libcrypto.
+     NOTE: This is for the 0.9.7 series ONLY.  This hack will never
+     appear in 0.9.8 or later.  We EXPECT application authors to have
+     dealt properly with this when 0.9.8 is released (unless we actually
+     make such changes in the libcrypto locking code that changes will
+     have to be made anyway).
+     [Richard Levitte]
+
+  *) In asn1_d2i_read_bio() repeatedly call BIO_read() until all content
+     octets have been read, EOF or an error occurs. Without this change
+     some truncated ASN1 structures will not produce an error.
+     [Steve Henson]
+
+  *) Disable Heimdal support, since it hasn't been fully implemented.
+     Still give the possibility to force the use of Heimdal, but with
+     warnings and a request that patches get sent to openssl-dev.
+     [Richard Levitte]
 
   *) Add the VC-CE target, introduce the WINCE sysname, and add
      INSTALL.WCE and appropriate conditionals to make it build.
@@ -103,7 +541,7 @@
 
      Remote buffer overflow in SSL3 protocol - an attacker could
      supply an oversized master key in Kerberos-enabled versions.
-     (CAN-2002-0657)
+     (CVE-2002-0657)
      [Ben Laurie (CHATS)]
 
   *) Change the SSL kerb5 codes to match RFC 2712.
@@ -139,7 +577,7 @@
 	# is assumed to contain the absolute OpenSSL source directory.
 	mkdir -p objtree/"`uname -s`-`uname -r`-`uname -m`"
 	cd objtree/"`uname -s`-`uname -r`-`uname -m`"
-	(cd $OPENSSL_SOURCE; find . -type f -o -type l) | while read F; do
+	(cd $OPENSSL_SOURCE; find . -type f) | while read F; do
 		mkdir -p `dirname $F`
 		ln -s $OPENSSL_SOURCE/$F $F
 	done
@@ -1639,6 +2077,11 @@ des-cbc           3624.96k     5258.21k     5530.91k     5624.30k     5628.26k
      be reduced modulo  m.
      [Lenka Fibikova <fibikova@exp-math.uni-essen.de>, Bodo Moeller]
 
+#if 0
+     The following entry accidentily appeared in the CHANGES file
+     distributed with OpenSSL 0.9.7.  The modifications described in
+     it do *not* apply to OpenSSL 0.9.7.
+
   *) Remove a few calls to bn_wexpand() in BN_sqr() (the one in there
      was actually never needed) and in BN_mul().  The removal in BN_mul()
      required a small change in bn_mul_part_recursive() and the addition
@@ -1647,6 +2090,7 @@ des-cbc           3624.96k     5258.21k     5530.91k     5624.30k     5628.26k
      bn_sub_words() and bn_add_words() except they take arrays with
      differing sizes.
      [Richard Levitte]
+#endif
 
   *) In 'openssl passwd', verify passwords read from the terminal
      unless the '-salt' option is used (which usually means that
@@ -1778,7 +2222,99 @@ des-cbc           3624.96k     5258.21k     5530.91k     5624.30k     5628.26k
   *) Clean old EAY MD5 hack from e_os.h.
      [Richard Levitte]
 
- Changes between 0.9.6g and 0.9.6h  [xx XXX xxxx]
+ Changes between 0.9.6l and 0.9.6m  [17 Mar 2004]
+
+  *) Fix null-pointer assignment in do_change_cipher_spec() revealed
+     by using the Codenomicon TLS Test Tool (CVE-2004-0079)
+     [Joe Orton, Steve Henson]
+
+ Changes between 0.9.6k and 0.9.6l  [04 Nov 2003]
+
+  *) Fix additional bug revealed by the NISCC test suite:
+
+     Stop bug triggering large recursion when presented with
+     certain ASN.1 tags (CVE-2003-0851)
+     [Steve Henson]
+
+ Changes between 0.9.6j and 0.9.6k  [30 Sep 2003]
+
+  *) Fix various bugs revealed by running the NISCC test suite:
+
+     Stop out of bounds reads in the ASN1 code when presented with
+     invalid tags (CVE-2003-0543 and CVE-2003-0544).
+     
+     If verify callback ignores invalid public key errors don't try to check
+     certificate signature with the NULL public key.
+
+     [Steve Henson]
+
+  *) In ssl3_accept() (ssl/s3_srvr.c) only accept a client certificate
+     if the server requested one: as stated in TLS 1.0 and SSL 3.0
+     specifications.
+     [Steve Henson]
+
+  *) In ssl3_get_client_hello() (ssl/s3_srvr.c), tolerate additional
+     extra data after the compression methods not only for TLS 1.0
+     but also for SSL 3.0 (as required by the specification).
+     [Bodo Moeller; problem pointed out by Matthias Loepfe]
+
+  *) Change X509_certificate_type() to mark the key as exported/exportable
+     when it's 512 *bits* long, not 512 bytes.
+     [Richard Levitte]
+
+ Changes between 0.9.6i and 0.9.6j  [10 Apr 2003]
+
+  *) Countermeasure against the Klima-Pokorny-Rosa extension of
+     Bleichbacher's attack on PKCS #1 v1.5 padding: treat
+     a protocol version number mismatch like a decryption error
+     in ssl3_get_client_key_exchange (ssl/s3_srvr.c).
+     [Bodo Moeller]
+
+  *) Turn on RSA blinding by default in the default implementation
+     to avoid a timing attack. Applications that don't want it can call
+     RSA_blinding_off() or use the new flag RSA_FLAG_NO_BLINDING.
+     They would be ill-advised to do so in most cases.
+     [Ben Laurie, Steve Henson, Geoff Thorpe, Bodo Moeller]
+
+  *) Change RSA blinding code so that it works when the PRNG is not
+     seeded (in this case, the secret RSA exponent is abused as
+     an unpredictable seed -- if it is not unpredictable, there
+     is no point in blinding anyway).  Make RSA blinding thread-safe
+     by remembering the creator's thread ID in rsa->blinding and
+     having all other threads use local one-time blinding factors
+     (this requires more computation than sharing rsa->blinding, but
+     avoids excessive locking; and if an RSA object is not shared
+     between threads, blinding will still be very fast).
+     [Bodo Moeller]
+
+ Changes between 0.9.6h and 0.9.6i  [19 Feb 2003]
+
+  *) In ssl3_get_record (ssl/s3_pkt.c), minimize information leaked
+     via timing by performing a MAC computation even if incorrrect
+     block cipher padding has been found.  This is a countermeasure
+     against active attacks where the attacker has to distinguish
+     between bad padding and a MAC verification error. (CVE-2003-0078)
+
+     [Bodo Moeller; problem pointed out by Brice Canvel (EPFL),
+     Alain Hiltgen (UBS), Serge Vaudenay (EPFL), and
+     Martin Vuagnoux (EPFL, Ilion)]
+
+ Changes between 0.9.6g and 0.9.6h  [5 Dec 2002]
+
+  *) New function OPENSSL_cleanse(), which is used to cleanse a section of
+     memory from it's contents.  This is done with a counter that will
+     place alternating values in each byte.  This can be used to solve
+     two issues: 1) the removal of calls to memset() by highly optimizing
+     compilers, and 2) cleansing with other values than 0, since those can
+     be read through on certain media, for example a swap space on disk.
+     [Geoff Thorpe]
+
+  *) Bugfix: client side session caching did not work with external caching,
+     because the session->cipher setting was not restored when reloading
+     from the external cache. This problem was masked, when
+     SSL_OP_NETSCAPE_REUSE_CIPHER_CHANGE_BUG (part of SSL_OP_ALL) was set.
+     (Found by Steve Haslam <steve@araqnid.ddts.net>.)
+     [Lutz Jaenicke]
 
   *) Fix client_certificate (ssl/s2_clnt.c): The permissible total
      length of the REQUEST-CERTIFICATE message is 18 .. 34, not 17 .. 33.
@@ -1890,7 +2426,7 @@ des-cbc           3624.96k     5258.21k     5530.91k     5624.30k     5628.26k
   *) Add various sanity checks to asn1_get_length() to reject
      the ASN1 length bytes if they exceed sizeof(long), will appear
      negative or the content length exceeds the length of the
-     supplied buffer. (CAN-2002-0659)
+     supplied buffer. (CVE-2002-0659)
      [Steve Henson, Adi Stav <stav@mercury.co.il>, James Yonan <jim@ntlp.com>]
 
   *) Assertions for various potential buffer overflows, not known to
@@ -1898,15 +2434,15 @@ des-cbc           3624.96k     5258.21k     5530.91k     5624.30k     5628.26k
      [Ben Laurie (CHATS)]
 
   *) Various temporary buffers to hold ASCII versions of integers were
-     too small for 64 bit platforms. (CAN-2002-0655)
+     too small for 64 bit platforms. (CVE-2002-0655)
      [Matthew Byng-Maddick <mbm@aldigital.co.uk> and Ben Laurie (CHATS)>
 
   *) Remote buffer overflow in SSL3 protocol - an attacker could
-     supply an oversized session ID to a client. (CAN-2002-0656)
+     supply an oversized session ID to a client. (CVE-2002-0656)
      [Ben Laurie (CHATS)]
 
   *) Remote buffer overflow in SSL2 protocol - an attacker could
-     supply an oversized client master key. (CAN-2002-0656)
+     supply an oversized client master key. (CVE-2002-0656)
      [Ben Laurie (CHATS)]
 
  Changes between 0.9.6c and 0.9.6d  [9 May 2002]

Configure

@@ -10,7 +10,7 @@ use strict;
 
 # see INSTALL for instructions.
 
-my $usage="Usage: Configure [no-<cipher> ...] [-Dxxx] [-lxxx] [-Lxxx] [-fxxx] [-Kxxx] [no-hw-xxx|no-hw] [[no-]threads] [[no-]shared] [[no-]zlib|zlib-dynamic] [no-asm] [no-dso] [no-krb5] [386] [--prefix=DIR] [--openssldir=OPENSSLDIR] [--with-xxx[=vvv]] [--test-sanity] os/compiler[:flags]\n";
+my $usage="Usage: Configure [no-<cipher> ...] [-Dxxx] [-lxxx] [-Lxxx] [-fxxx] [-Kxxx] [no-engine] [no-hw-xxx|no-hw] [[no-]threads] [[no-]shared] [[no-]zlib|zlib-dynamic] [no-asm] [no-dso] [no-krb5] [386] [[no-]fips] [debug] [--prefix=DIR] [--openssldir=OPENSSLDIR] [--with-xxx[=vvv]] [--test-sanity] os/compiler[:flags]\n";
 
 # Options:
 #
@@ -38,6 +38,7 @@ my $usage="Usage: Configure [no-<cipher> ...] [-Dxxx] [-lxxx] [-Lxxx] [-fxxx] [-
 # --test-sanity Make a number of sanity checks on the data in this file.
 #               This is a debugging tool for OpenSSL developers.
 #
+# no-engine     do not compile in any engine code.
 # no-hw-xxx     do not compile support for specific crypto hardware.
 #               Generic OpenSSL-style methods relating to this support
 #               are always compiled but return NULL if the hardware
@@ -107,7 +108,6 @@ my $tlib="-lnsl -lsocket";
 my $bits1="THIRTY_TWO_BIT ";
 my $bits2="SIXTY_FOUR_BIT ";
 
-my $x86_sol_asm="asm/bn86-sol.o asm/co86-sol.o:asm/dx86-sol.o asm/yx86-sol.o:asm/bx86-sol.o:asm/mx86-sol.o:asm/sx86-sol.o:asm/cx86-sol.o:asm/rx86-sol.o:asm/rm86-sol.o:asm/r586-sol.o";
 my $x86_elf_asm="asm/bn86-elf.o asm/co86-elf.o:asm/dx86-elf.o asm/yx86-elf.o:asm/bx86-elf.o:asm/mx86-elf.o:asm/sx86-elf.o:asm/cx86-elf.o:asm/rx86-elf.o:asm/rm86-elf.o:asm/r586-elf.o";
 my $x86_out_asm="asm/bn86-out.o asm/co86-out.o:asm/dx86-out.o asm/yx86-out.o:asm/bx86-out.o:asm/mx86-out.o:asm/sx86-out.o:asm/cx86-out.o:asm/rx86-out.o:asm/rm86-out.o:asm/r586-out.o";
 my $x86_bsdi_asm="asm/bn86bsdi.o asm/co86bsdi.o:asm/dx86bsdi.o asm/yx86bsdi.o:asm/bx86bsdi.o:asm/mx86bsdi.o:asm/sx86bsdi.o:asm/cx86bsdi.o:asm/rx86bsdi.o:asm/rm86bsdi.o:asm/r586bsdi.o";
@@ -135,65 +135,82 @@ my %table=(
 # Our development configs
 "purify",	"purify gcc:-g -DPURIFY -Wall::(unknown)::-lsocket -lnsl::::",
 "debug",	"gcc:-DBN_DEBUG -DREF_CHECK -DCONF_DEBUG -DBN_CTX_DEBUG -DCRYPTO_MDEBUG -DOPENSSL_NO_ASM -ggdb -g2 -Wformat -Wshadow -Wmissing-prototypes -Wmissing-declarations -Werror::(unknown)::-lefence::::",
-"debug-ben",	"gcc:-DBN_DEBUG -DREF_CHECK -DCONF_DEBUG -DBN_CTX_DEBUG -DCRYPTO_MDEBUG -DPEDANTIC -DDEBUG_SAFESTACK -O2 -pedantic -Wall -Wshadow -Werror -pipe::(unknown)::::asm/bn86-elf.o asm/co86-elf.o",
+"debug-ben",	"gcc:-DBN_DEBUG -DREF_CHECK -DCONF_DEBUG -DBN_CTX_DEBUG -DCRYPTO_MDEBUG -DPEDANTIC -DDEBUG_SAFESTACK -O2 -Wall -Wshadow -Werror -pipe::(unknown)::::asm/bn86-elf.o asm/co86-elf.o",
 "debug-ben-openbsd","gcc:-DBN_DEBUG -DREF_CHECK -DCONF_DEBUG -DBN_CTX_DEBUG -DCRYPTO_MDEBUG -DPEDANTIC -DDEBUG_SAFESTACK -DOPENSSL_OPENBSD_DEV_CRYPTO -DOPENSSL_NO_ASM -O2 -pedantic -Wall -Wshadow -Werror -pipe::(unknown)::::",
 "debug-ben-openbsd-debug","gcc:-DBN_DEBUG -DREF_CHECK -DCONF_DEBUG -DBN_CTX_DEBUG -DCRYPTO_MDEBUG -DPEDANTIC -DDEBUG_SAFESTACK -DOPENSSL_OPENBSD_DEV_CRYPTO -DOPENSSL_NO_ASM -g3 -O2 -pedantic -Wall -Wshadow -Werror -pipe::(unknown)::::",
-"debug-ben-debug",	"gcc:-DBN_DEBUG -DREF_CHECK -DCONF_DEBUG -DBN_CTX_DEBUG -DCRYPTO_MDEBUG -DPEDANTIC -DDEBUG_SAFESTACK -g3 -O2 -pedantic -Wall -Wshadow -Werror -pipe::(unknown)::::::",
+"debug-ben-debug",	"gcc:-DBN_DEBUG -DREF_CHECK -DCONF_DEBUG -DBN_CTX_DEBUG -DCRYPTO_MDEBUG -DPEDANTIC -DDEBUG_SAFESTACK -g3 -O2 -Wall -Wshadow -Werror -pipe::(unknown)::::::",
 "debug-ben-strict",	"gcc:-DBN_DEBUG -DREF_CHECK -DCONF_DEBUG -DBN_CTX_DEBUG -DCRYPTO_MDEBUG -DCONST_STRICT -O2 -Wall -Wshadow -Werror -Wpointer-arith -Wcast-qual -Wwrite-strings -pipe::(unknown)::::::",
+"debug-ben-fips-debug","gcc:-DBN_DEBUG -DREF_CHECK -DCONF_DEBUG -DBN_CTX_DEBUG -DCRYPTO_MDEBUG -DPEDANTIC -DDEBUG_SAFESTACK -DOPENSSL_FIPS -g3 -O2 -pedantic -Wall -Wshadow -Werror -pipe::(unknown)::::asm/bn86-elf.o asm/co86-elf.o",
 "debug-rse","cc:-DTERMIOS -DL_ENDIAN -pipe -O -g -ggdb3 -Wall::(unknown):::BN_LLONG ${x86_gcc_des} ${x86_gcc_opts}:${x86_elf_asm}",
 "debug-bodo",	"gcc:-DL_ENDIAN -DBN_DEBUG -DREF_CHECK -DCONF_DEBUG -DBN_CTX_DEBUG -DBIO_PAIR_DEBUG -DPEDANTIC -g -m486 -pedantic -Wshadow -Wall::-D_REENTRANT:::BN_LLONG ${x86_gcc_des} ${x86_gcc_opts}:${x86_elf_asm}",
 "debug-ulf",	"gcc:-DL_ENDIAN -DREF_CHECK -DCONF_DEBUG -DBN_DEBUG -DBN_CTX_DEBUG -DCRYPTO_MDEBUG_ALL -g -O2 -m486 -Wall -Werror -Wshadow -pipe::-D_REENTRANT:::${x86_gcc_des} ${x86_gcc_opts}:${x86_elf_asm}",
-"debug-steve",	"gcc:-DL_ENDIAN -DREF_CHECK -DCONF_DEBUG -DBN_CTX_DEBUG -DDEBUG_SAFESTACK -DCRYPTO_MDEBUG_ALL -DPEDANTIC -g -mcpu=i486 -pedantic -Wall -Werror -Wshadow -pipe::-D_REENTRANT::-rdynamic -ldl:${x86_gcc_des} ${x86_gcc_opts}:${x86_elf_asm}:dlfcn",
+"debug-steve",	"gcc:-DL_ENDIAN -DREF_CHECK -DCONF_DEBUG -DBN_CTX_DEBUG -DDEBUG_SAFESTACK -DCRYPTO_MDEBUG_ALL -DPEDANTIC -g -mcpu=i486 -pedantic -Wno-long-long -Wall -Werror -Wshadow -pipe::-D_REENTRANT::-ldl:BN_LLONG ${x86_gcc_des} ${x86_gcc_opts}:${x86_elf_asm}:dlfcn",
 "debug-steve-linux-pseudo64",	"gcc:-DL_ENDIAN -DREF_CHECK -DCONF_DEBUG -DBN_CTX_DEBUG -DDEBUG_SAFESTACK -DCRYPTO_MDEBUG_ALL -DOPENSSL_NO_ASM -g -mcpu=i486 -Wall -Werror -Wshadow -pipe::-D_REENTRANT::-rdynamic -ldl:SIXTY_FOUR_BIT::dlfcn",
-"debug-levitte-linux-elf","gcc:-DLEVITTE_DEBUG -DREF_CHECK -DCONF_DEBUG -DBN_CTX_DEBUG -DCRYPTO_MDEBUG -DL_ENDIAN -DTERMIO -D_POSIX_SOURCE -DPEDANTIC -ggdb -g3 -mcpu=i486 -pedantic -ansi -Wall -Wshadow -Wcast-align -Wstrict-prototypes -Wmissing-prototypes -Wno-long-long -pipe::-D_REENTRANT::-ldl:BN_LLONG ${x86_gcc_des} ${x86_gcc_opts}:${x86_elf_asm}:dlfcn:linux-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
-"debug-levitte-linux-noasm","gcc:-DLEVITTE_DEBUG -DREF_CHECK -DCONF_DEBUG -DBN_CTX_DEBUG -DCRYPTO_MDEBUG -DOPENSSL_NO_ASM -DL_ENDIAN -DTERMIO -D_POSIX_SOURCE -DPEDANTIC -ggdb -g3 -mcpu=i486 -pedantic -ansi -Wall -Wshadow -Wcast-align -Wstrict-prototypes -Wmissing-prototypes -Wno-long-long -pipe::-D_REENTRANT::-ldl:BN_LLONG ${x86_gcc_des} ${x86_gcc_opts}::::::::::dlfcn:linux-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
-"debug-levitte-linux-elf-extreme","gcc:-DLEVITTE_DEBUG -DREF_CHECK -DCONF_DEBUG -DBN_CTX_DEBUG -DCRYPTO_MDEBUG -DL_ENDIAN -DTERMIO -D_POSIX_SOURCE -DPEDANTIC -ggdb -g3 -mcpu=i486 -pedantic -ansi -Wall -W -Wundef -Wshadow -Wcast-align -Wstrict-prototypes -Wmissing-prototypes -Wconversion -Wno-long-long -pipe::-D_REENTRANT::-ldl:BN_LLONG ${x86_gcc_des} ${x86_gcc_opts}:${x86_elf_asm}:dlfcn:linux-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
-"debug-levitte-linux-noasm-extreme","gcc:-DLEVITTE_DEBUG -DREF_CHECK -DCONF_DEBUG -DBN_CTX_DEBUG -DCRYPTO_MDEBUG -DOPENSSL_NO_ASM -DL_ENDIAN -DTERMIO -D_POSIX_SOURCE -DPEDANTIC -ggdb -g3 -mcpu=i486 -pedantic -ansi -Wall -W -Wundef -Wshadow -Wcast-align -Wstrict-prototypes -Wmissing-prototypes -Wconversion -Wno-long-long -pipe::-D_REENTRANT::-ldl:BN_LLONG ${x86_gcc_des} ${x86_gcc_opts}::::::::::dlfcn:linux-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
+"debug-levitte-linux-elf","gcc:-DLEVITTE_DEBUG -DREF_CHECK -DCONF_DEBUG -DBN_CTX_DEBUG -DCRYPTO_MDEBUG -DL_ENDIAN -DTERMIO -D_POSIX_SOURCE -DPEDANTIC -ggdb -g3 -mcpu=i486 -pedantic -ansi -Wall -Wshadow -Wcast-align -Wmissing-prototypes -Wno-long-long -pipe::-D_REENTRANT::-ldl:BN_LLONG ${x86_gcc_des} ${x86_gcc_opts}:${x86_elf_asm}:dlfcn:linux-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
+"debug-levitte-linux-noasm","gcc:-DLEVITTE_DEBUG -DREF_CHECK -DCONF_DEBUG -DBN_CTX_DEBUG -DCRYPTO_MDEBUG -DOPENSSL_NO_ASM -DL_ENDIAN -DTERMIO -D_POSIX_SOURCE -DPEDANTIC -ggdb -g3 -mcpu=i486 -pedantic -ansi -Wall -Wshadow -Wcast-align -Wmissing-prototypes -Wno-long-long -pipe::-D_REENTRANT::-ldl:BN_LLONG ${x86_gcc_des} ${x86_gcc_opts}::::::::::dlfcn:linux-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
+"debug-levitte-linux-elf-extreme","gcc:-DLEVITTE_DEBUG -DREF_CHECK -DCONF_DEBUG -DBN_CTX_DEBUG -DCRYPTO_MDEBUG -DL_ENDIAN -DTERMIO -D_POSIX_SOURCE -DPEDANTIC -ggdb -g3 -mcpu=i486 -pedantic -ansi -Wall -W -Wundef -Wshadow -Wcast-align -Wmissing-prototypes -Wconversion -Wno-long-long -pipe::-D_REENTRANT::-ldl:BN_LLONG ${x86_gcc_des} ${x86_gcc_opts}:${x86_elf_asm}:dlfcn:linux-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
+"debug-levitte-linux-noasm-extreme","gcc:-DLEVITTE_DEBUG -DREF_CHECK -DCONF_DEBUG -DBN_CTX_DEBUG -DCRYPTO_MDEBUG -DOPENSSL_NO_ASM -DL_ENDIAN -DTERMIO -D_POSIX_SOURCE -DPEDANTIC -ggdb -g3 -mcpu=i486 -pedantic -ansi -Wall -W -Wundef -Wshadow -Wcast-align -Wmissing-prototypes -Wconversion -Wno-long-long -pipe::-D_REENTRANT::-ldl:BN_LLONG ${x86_gcc_des} ${x86_gcc_opts}::::::::::dlfcn:linux-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
 "dist",		"cc:-O::(unknown)::::::",
 
 # Basic configs that should work on any (32 and less bit) box
 "gcc",		"gcc:-O3::(unknown):::BN_LLONG:::",
 "cc",		"cc:-O::(unknown)::::::",
 
+####VOS Configurations
+"vos-gcc","gcc:-b hppa1.1-stratus-vos -O3 -Wall -Wuninitialized -D_POSIX_C_SOURCE=200112L -D_BSD::(unknown):VOS:-Wl,-map:BN_LLONG:::::::::::::.so:",
+"debug-vos-gcc","gcc:-b hppa1.1-stratus-vos -O0 -g -Wall -D_POSIX_C_SOURCE=200112L -D_BSD -DBN_DEBUG -DREF_CHECK -DCONF_DEBUG -DBN_CTX_DEBUG -DCRYPTO_MDEBUG::(unknown):VOS:-Wl,-map:BN_LLONG:::::::::::::.so:",
+"vos-vcc","vcc:-b i386-stratus-vos -O3 -D_POSIX_C_SOURCE=200112L -D_BSD::(unknown):VOS:-Wl,-map::::::::::::::.so:",
+"debug-vos-vcc","vcc:-b i386-stratus-vos -O0 -g -D_POSIX_C_SOURCE=200112L -D_BSD -DBN_DEBUG -DREF_CHECK -DCONF_DEBUG -DBN_CTX_DEBUG -DCRYPTO_MDEBUG::(unknown):VOS:-Wl,-map::::::::::::::.so:",
+
 #### Solaris x86 with GNU C setups
 # -DOPENSSL_NO_INLINE_ASM switches off inline assembler. We have to do it
 # here because whenever GNU C instantiates an assembler template it
 # surrounds it with #APP #NO_APP comment pair which (at least Solaris
 # 7_x86) /usr/ccs/bin/as fails to assemble with "Illegal mnemonic"
 # error message.
-"solaris-x86-gcc","gcc:-O3 -fomit-frame-pointer -m486 -Wall -DL_ENDIAN -DOPENSSL_NO_INLINE_ASM::-D_REENTRANT::-lsocket -lnsl -ldl:BN_LLONG ${x86_gcc_des} ${x86_gcc_opts}:${x86_sol_asm}:dlfcn:solaris-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
+"solaris-x86-gcc","gcc:-O3 -fomit-frame-pointer -m486 -Wall -DL_ENDIAN -DOPENSSL_NO_INLINE_ASM::-D_REENTRANT::-lsocket -lnsl -ldl:BN_LLONG ${x86_gcc_des} ${x86_gcc_opts}:${x86_elf_asm}:dlfcn:solaris-shared:-fPIC:-shared:.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
+# -shared -static-libgcc might appear controversial, but modules taken
+# from static libgcc do not have relocations and linking them into our
+# shared objects doesn't have any negative side-effects. On the contrary,
+# doing so makes it possible to use gcc shared build with Sun C. Given
+# that gcc generates faster code [thanks to inline assembler], I would
+# actually recommend to consider using gcc shared build even with vendor
+# compiler:-)
+#						<appro@fy.chalmers.se>
+"solaris64-x86_64-gcc","gcc:-m64 -O3 -Wall -DL_ENDIAN -DMD32_REG_T=int::-D_REENTRANT::-lsocket -lnsl -ldl:SIXTY_FOUR_BIT_LONG RC4_CHUNK RC4_CHAR BF_PTR2 DES_INT DES_UNROLL:asm/x86_64-gcc.o::::::asm/rc4-x86_64.o:::dlfcn:solaris-shared:-fPIC:-m64 -shared -static-libgcc:.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
 
 #### Solaris x86 with Sun C setups
-"solaris-x86-cc","cc:-fast -O -Xa::-D_REENTRANT::-lsocket -lnsl -ldl:BN_LLONG RC4_CHAR RC4_CHUNK DES_PTR DES_UNROLL BF_PTR::::::::::dlfcn:solaris-shared:-KPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
+"solaris-x86-cc","cc:-fast -O -Xa::-D_REENTRANT::-lsocket -lnsl -ldl:BN_LLONG RC4_CHAR RC4_CHUNK DES_PTR DES_UNROLL BF_PTR::::::::::dlfcn:solaris-shared:-KPIC:-G -dy -z text:.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
+"solaris64-x86_64-cc","cc:-fast -xarch=amd64 -xstrconst -Xa -DL_ENDIAN::-D_REENTRANT::-lsocket -lnsl -ldl:SIXTY_FOUR_BIT_LONG RC4_CHUNK RC4_CHAR BF_PTR2 DES_INT DES_UNROLL::::::::::dlfcn:solaris-shared:-KPIC:-xarch=amd64 -G -dy -z text:.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
 
 #### SPARC Solaris with GNU C setups
-"solaris-sparcv7-gcc","gcc:-O3 -fomit-frame-pointer -Wall -DB_ENDIAN -DBN_DIV2W::-D_REENTRANT::-lsocket -lnsl -ldl:BN_LLONG RC4_CHAR RC4_CHUNK DES_UNROLL BF_PTR::::::::::dlfcn:solaris-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
-"solaris-sparcv8-gcc","gcc:-mv8 -O3 -fomit-frame-pointer -Wall -DB_ENDIAN -DBN_DIV2W::-D_REENTRANT::-lsocket -lnsl -ldl:BN_LLONG RC4_CHAR RC4_CHUNK DES_UNROLL BF_PTR:asm/sparcv8.o:::::::::dlfcn:solaris-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
+"solaris-sparcv7-gcc","gcc:-O3 -fomit-frame-pointer -Wall -DB_ENDIAN -DBN_DIV2W::-D_REENTRANT::-lsocket -lnsl -ldl:BN_LLONG RC4_CHAR RC4_CHUNK DES_UNROLL BF_PTR::::::::::dlfcn:solaris-shared:-fPIC:-shared:.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
+"solaris-sparcv8-gcc","gcc:-mv8 -O3 -fomit-frame-pointer -Wall -DB_ENDIAN -DBN_DIV2W::-D_REENTRANT::-lsocket -lnsl -ldl:BN_LLONG RC4_CHAR RC4_CHUNK DES_UNROLL BF_PTR:asm/sparcv8.o:::::::::dlfcn:solaris-shared:-fPIC:-shared:.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
 # -m32 should be safe to add as long as driver recognizes -mcpu=ultrasparc
-"solaris-sparcv9-gcc","gcc:-m32 -mcpu=ultrasparc -O3 -fomit-frame-pointer -Wall -DB_ENDIAN -DBN_DIV2W::-D_REENTRANT:ULTRASPARC:-lsocket -lnsl -ldl:BN_LLONG RC4_CHAR RC4_CHUNK DES_UNROLL BF_PTR:asm/sparcv8plus.o:::asm/md5-sparcv8plus.o::::::dlfcn:solaris-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
-"solaris64-sparcv9-gcc31","gcc:-mcpu=ultrasparc -m64 -O3 -fomit-frame-pointer -Wall -DB_ENDIAN::-D_REENTRANT:ULTRASPARC:-lsocket -lnsl -ldl:SIXTY_FOUR_BIT_LONG RC4_CHAR RC4_CHUNK DES_INT DES_PTR DES_RISC1 DES_UNROLL BF_PTR::::asm/md5-sparcv9.o::::::dlfcn:solaris-shared:-fPIC:-m64:.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
+"solaris-sparcv9-gcc","gcc:-m32 -mcpu=ultrasparc -O3 -fomit-frame-pointer -Wall -DB_ENDIAN -DBN_DIV2W::-D_REENTRANT:ULTRASPARC:-lsocket -lnsl -ldl:BN_LLONG RC4_CHAR RC4_CHUNK DES_UNROLL BF_PTR:asm/sparcv8plus.o:::asm/md5-sparcv8plus.o::::::dlfcn:solaris-shared:-fPIC:-shared:.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
+"solaris64-sparcv9-gcc31","gcc:-mcpu=ultrasparc -m64 -O3 -fomit-frame-pointer -Wall -DB_ENDIAN::-D_REENTRANT:ULTRASPARC:-lsocket -lnsl -ldl:SIXTY_FOUR_BIT_LONG RC4_CHAR RC4_CHUNK DES_INT DES_PTR DES_RISC1 DES_UNROLL BF_PTR::::asm/md5-sparcv9.o::::::dlfcn:solaris-shared:-fPIC:-m64 -shared:.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
 # gcc pre-2.8 doesn't understand -mcpu=ultrasparc, so fall down to -mv8
 # but keep the assembler modules.
-"solaris-sparcv9-gcc27","gcc:-mv8 -O3 -fomit-frame-pointer -Wall -DB_ENDIAN -DBN_DIV2W::-D_REENTRANT:ULTRASPARC:-lsocket -lnsl -ldl:BN_LLONG RC4_CHAR RC4_CHUNK DES_UNROLL BF_PTR:asm/sparcv8plus-gcc27.o:::asm/md5-sparcv8plus-gcc27.o::::::dlfcn:solaris-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
-"solaris64-sparcv9-gcc","gcc:-m64 -mcpu=ultrasparc -O3 -Wall -DB_ENDIAN::-D_REENTRANT:ULTRASPARC:-lsocket -lnsl -ldl:SIXTY_FOUR_BIT_LONG RC4_CHAR RC4_CHUNK DES_INT DES_PTR DES_RISC1 DES_UNROLL BF_PTR::::asm/md5-sparcv9.o::::::dlfcn:solaris-shared:-fPIC:-m64:.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
+"solaris-sparcv9-gcc27","gcc:-mv8 -O3 -fomit-frame-pointer -Wall -DB_ENDIAN -DBN_DIV2W::-D_REENTRANT:ULTRASPARC:-lsocket -lnsl -ldl:BN_LLONG RC4_CHAR RC4_CHUNK DES_UNROLL BF_PTR:asm/sparcv8plus-gcc27.o:::asm/md5-sparcv8plus-gcc27.o::::::dlfcn:solaris-shared:-fPIC:-shared:.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
+"solaris64-sparcv9-gcc","gcc:-m64 -mcpu=ultrasparc -O3 -Wall -DB_ENDIAN::-D_REENTRANT:ULTRASPARC:-lsocket -lnsl -ldl:SIXTY_FOUR_BIT_LONG RC4_CHAR RC4_CHUNK DES_INT DES_PTR DES_RISC1 DES_UNROLL BF_PTR::::asm/md5-sparcv9.o::::::dlfcn:solaris-shared:-fPIC:-m64 -shared:.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
 
 ####
-"debug-solaris-sparcv8-gcc","gcc:-DBN_DEBUG -DREF_CHECK -DCONF_DEBUG -DBN_CTX_DEBUG -DCRYPTO_MDEBUG_ALL -O -g -mv8 -Wall -DB_ENDIAN::-D_REENTRANT::-lsocket -lnsl -ldl:BN_LLONG RC4_CHAR RC4_CHUNK DES_UNROLL BF_PTR:asm/sparcv8.o:::::::::dlfcn:solaris-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
-"debug-solaris-sparcv9-gcc","gcc:-DBN_DEBUG -DREF_CHECK -DCONF_DEBUG -DBN_CTX_DEBUG -DCRYPTO_MDEBUG_ALL -O -g -mcpu=ultrasparc -Wall -DB_ENDIAN::-D_REENTRANT::-lsocket -lnsl -ldl:BN_LLONG RC4_CHAR RC4_CHUNK DES_UNROLL BF_PTR:asm/sparcv8plus.o:::::::::dlfcn:solaris-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
+"debug-solaris-sparcv8-gcc","gcc:-DBN_DEBUG -DREF_CHECK -DCONF_DEBUG -DBN_CTX_DEBUG -DCRYPTO_MDEBUG_ALL -O -g -mv8 -Wall -DB_ENDIAN::-D_REENTRANT::-lsocket -lnsl -ldl:BN_LLONG RC4_CHAR RC4_CHUNK DES_UNROLL BF_PTR:asm/sparcv8.o:::::::::dlfcn:solaris-shared:-fPIC:-shared:.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
+"debug-solaris-sparcv9-gcc","gcc:-DBN_DEBUG -DREF_CHECK -DCONF_DEBUG -DBN_CTX_DEBUG -DCRYPTO_MDEBUG_ALL -O -g -mcpu=ultrasparc -Wall -DB_ENDIAN::-D_REENTRANT::-lsocket -lnsl -ldl:BN_LLONG RC4_CHAR RC4_CHUNK DES_UNROLL BF_PTR:asm/sparcv8plus.o:::::::::dlfcn:solaris-shared:-fPIC:-shared:.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
 
 #### SPARC Solaris with Sun C setups
 # DO NOT use /xO[34] on sparc with SC3.0.  It is broken, and will not pass the tests
-"solaris-sparc-sc3","cc:-fast -O -Xa -DB_ENDIAN::-D_REENTRANT::-lsocket -lnsl -ldl:BN_LLONG RC4_CHAR RC4_CHUNK DES_PTR DES_UNROLL BF_PTR::::::::::dlfcn:solaris-shared:-KPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
+"solaris-sparc-sc3","cc:-fast -O -Xa -DB_ENDIAN::-D_REENTRANT::-lsocket -lnsl -ldl:BN_LLONG RC4_CHAR RC4_CHUNK DES_PTR DES_UNROLL BF_PTR::::::::::dlfcn:solaris-shared:-KPIC:-G -dy -z text:.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
 # SC4.0 doesn't pass 'make test', upgrade to SC5.0 or SC4.2.
 # SC4.2 is ok, better than gcc even on bn as long as you tell it -xarch=v8
 # SC5.0 note: Compiler common patch 107357-01 or later is required!
-"solaris-sparcv7-cc","cc:-xO5 -xstrconst -xdepend -Xa -DB_ENDIAN -DBN_DIV2W::-D_REENTRANT::-lsocket -lnsl -ldl:BN_LLONG RC4_CHAR RC4_CHUNK DES_PTR DES_RISC1 DES_UNROLL BF_PTR::::::::::dlfcn:solaris-shared:-KPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
-"solaris-sparcv8-cc","cc:-xarch=v8 -xO5 -xstrconst -xdepend -Xa -DB_ENDIAN -DBN_DIV2W::-D_REENTRANT::-lsocket -lnsl -ldl:BN_LLONG RC4_CHAR RC4_CHUNK DES_PTR DES_RISC1 DES_UNROLL BF_PTR:asm/sparcv8.o:::::::::dlfcn:solaris-shared:-KPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
-"solaris-sparcv9-cc","cc:-xtarget=ultra -xarch=v8plus -xO5 -xstrconst -xdepend -Xa -DB_ENDIAN -DBN_DIV2W::-D_REENTRANT:ULTRASPARC:-lsocket -lnsl -ldl:BN_LLONG RC4_CHAR RC4_CHUNK_LL DES_PTR DES_RISC1 DES_UNROLL BF_PTR:asm/sparcv8plus.o:::asm/md5-sparcv8plus.o::::::dlfcn:solaris-shared:-KPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
-"solaris64-sparcv9-cc","cc:-xtarget=ultra -xarch=v9 -xO5 -xstrconst -xdepend -Xa -DB_ENDIAN::-D_REENTRANT:ULTRASPARC:-lsocket -lnsl -ldl:SIXTY_FOUR_BIT_LONG RC4_CHAR RC4_CHUNK DES_INT DES_PTR DES_RISC1 DES_UNROLL BF_PTR::::asm/md5-sparcv9.o::::::dlfcn:solaris-shared:-KPIC:-xarch=v9:.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR):/usr/ccs/bin/ar rs",
+"solaris-sparcv7-cc","cc:-xO5 -xstrconst -xdepend -Xa -DB_ENDIAN -DBN_DIV2W::-D_REENTRANT::-lsocket -lnsl -ldl:BN_LLONG RC4_CHAR RC4_CHUNK DES_PTR DES_RISC1 DES_UNROLL BF_PTR::::::::::dlfcn:solaris-shared:-KPIC:-G -dy -z text:.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
+"solaris-sparcv8-cc","cc:-xarch=v8 -xO5 -xstrconst -xdepend -Xa -DB_ENDIAN -DBN_DIV2W::-D_REENTRANT::-lsocket -lnsl -ldl:BN_LLONG RC4_CHAR RC4_CHUNK DES_PTR DES_RISC1 DES_UNROLL BF_PTR:asm/sparcv8.o:::::::::dlfcn:solaris-shared:-KPIC:-G -dy -z text:.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
+"solaris-sparcv9-cc","cc:-xtarget=ultra -xarch=v8plus -xO5 -xstrconst -xdepend -Xa -DB_ENDIAN -DBN_DIV2W::-D_REENTRANT:ULTRASPARC:-lsocket -lnsl -ldl:BN_LLONG RC4_CHAR RC4_CHUNK_LL DES_PTR DES_RISC1 DES_UNROLL BF_PTR:asm/sparcv8plus.o:::asm/md5-sparcv8plus.o::::::dlfcn:solaris-shared:-KPIC:-G -dy -z text:.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
+"solaris64-sparcv9-cc","cc:-xtarget=ultra -xarch=v9 -xO5 -xstrconst -xdepend -Xa -DB_ENDIAN::-D_REENTRANT:ULTRASPARC:-lsocket -lnsl -ldl:SIXTY_FOUR_BIT_LONG RC4_CHAR RC4_CHUNK DES_INT DES_PTR DES_RISC1 DES_UNROLL BF_PTR::::asm/md5-sparcv9.o::::::dlfcn:solaris-shared:-KPIC:-xarch=v9 -G -dy -z text:.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR):/usr/ccs/bin/ar rs",
 ####
-"debug-solaris-sparcv8-cc","cc:-DBN_DEBUG -DREF_CHECK -DCONF_DEBUG -DBN_CTX_DEBUG -DCRYPTO_MDEBUG_ALL -xarch=v8 -g -O -xstrconst -Xa -DB_ENDIAN -DBN_DIV2W::-D_REENTRANT::-lsocket -lnsl -ldl:BN_LLONG RC4_CHAR RC4_CHUNK DES_PTR DES_RISC1 DES_UNROLL BF_PTR:asm/sparcv8.o:::::::::dlfcn:solaris-shared:-KPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
-"debug-solaris-sparcv9-cc","cc:-DBN_DEBUG -DREF_CHECK -DCONF_DEBUG -DBN_CTX_DEBUG -DCRYPTO_MDEBUG_ALL -xtarget=ultra -xarch=v8plus -g -O -xstrconst -Xa -DB_ENDIAN -DBN_DIV2W::-D_REENTRANT:ULTRASPARC:-lsocket -lnsl -ldl:BN_LLONG RC4_CHAR RC4_CHUNK_LL DES_PTR DES_RISC1 DES_UNROLL BF_PTR:asm/sparcv8plus.o:::asm/md5-sparcv8plus.o::::::dlfcn:solaris-shared:-KPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
+"debug-solaris-sparcv8-cc","cc:-DBN_DEBUG -DREF_CHECK -DCONF_DEBUG -DBN_CTX_DEBUG -DCRYPTO_MDEBUG_ALL -xarch=v8 -g -O -xstrconst -Xa -DB_ENDIAN -DBN_DIV2W::-D_REENTRANT::-lsocket -lnsl -ldl:BN_LLONG RC4_CHAR RC4_CHUNK DES_PTR DES_RISC1 DES_UNROLL BF_PTR:asm/sparcv8.o:::::::::dlfcn:solaris-shared:-KPIC:-G -dy -z text:.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
+"debug-solaris-sparcv9-cc","cc:-DBN_DEBUG -DREF_CHECK -DCONF_DEBUG -DBN_CTX_DEBUG -DCRYPTO_MDEBUG_ALL -xtarget=ultra -xarch=v8plus -g -O -xstrconst -Xa -DB_ENDIAN -DBN_DIV2W::-D_REENTRANT:ULTRASPARC:-lsocket -lnsl -ldl:BN_LLONG RC4_CHAR RC4_CHUNK_LL DES_PTR DES_RISC1 DES_UNROLL BF_PTR:asm/sparcv8plus.o:::asm/md5-sparcv8plus.o::::::dlfcn:solaris-shared:-KPIC:-G -dy -z text:.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
 
 #### SPARC Linux setups
 "linux-sparcv7","gcc:-DB_ENDIAN -DTERMIO -O3 -fomit-frame-pointer -Wall::-D_REENTRANT:::BN_LLONG RC4_CHAR RC4_CHUNK DES_UNROLL BF_PTR::",
@@ -203,9 +220,8 @@ my %table=(
 # it's a real mess with -mcpu=ultrasparc option under Linux, but
 # -Wa,-Av8plus should do the trick no matter what.
 "linux-sparcv9","gcc:-mcpu=ultrasparc -DB_ENDIAN -DTERMIO -O3 -fomit-frame-pointer -Wall -Wa,-Av8plus -DBN_DIV2W::-D_REENTRANT:ULTRASPARC:-ldl:BN_LLONG RC4_CHAR RC4_CHUNK DES_UNROLL BF_PTR:asm/sparcv8plus.o:::asm/md5-sparcv8plus.o::::::dlfcn:linux-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
-# !!!Folowing can't be even tested yet!!!
-#    We have to wait till 64-bit glibc for SPARC is operational!!!
-#"linux64-sparcv9","sparc64-linux-gcc:-m64 -mcpu=v9 -DB_ENDIAN -DTERMIO -O3 -fomit-frame-pointer -Wall -DBN_DIV2W::-D_REENTRANT:ULTRASPARC::BN_LLONG RC4_CHAR RC4_CHUNK DES_UNROLL BF_PTR::::asm/md5-sparcv9.o:",
+# GCC 3.1 is a requirement
+"linux64-sparcv9","gcc:-m64 -mcpu=ultrasparc -DB_ENDIAN -DTERMIO -O3 -fomit-frame-pointer -Wall::-D_REENTRANT:ULTRASPARC:-ldl:SIXTY_FOUR_BIT_LONG RC4_CHAR RC4_CHUNK DES_UNROLL BF_PTR::::asm/md5-sparcv9.o::::::dlfcn:linux-shared:-fPIC:-m64:.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
 
 # Sunos configs, assuming sparc for the gcc one.
 ##"sunos-cc", "cc:-O4 -DNOPROTO -DNOCONST::(unknown):SUNOS::DES_UNROLL:::",
@@ -217,13 +233,13 @@ my %table=(
 "irix-cc", "cc:-O2 -use_readonly_const -DTERMIOS -DB_ENDIAN::(unknown):::BN_LLONG RC4_CHAR RC4_CHUNK DES_PTR DES_RISC2 DES_UNROLL BF_PTR::::::::::dlfcn:irix-shared:::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
 #### IRIX 6.x configs
 # Only N32 and N64 ABIs are supported. If you need O32 ABI build, invoke
-# './Configure irix-[g]cc' manually.
+# './Configure irix-cc -o32' manually.
 # -mips4 flag is added by ./config when appropriate.
-"irix-mips3-gcc","gcc:-mabi=n32 -mmips-as -O3 -DTERMIOS -DB_ENDIAN -DBN_DIV3W::-D_SGI_MP_SOURCE:::MD2_CHAR RC4_INDEX RC4_CHAR RC4_CHUNK_LL DES_UNROLL DES_RISC2 DES_PTR BF_PTR SIXTY_FOUR_BIT:${mips3_irix_asm}:dlfcn:irix-shared:::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
-"irix-mips3-cc", "cc:-n32 -O2 -use_readonly_const -DTERMIOS -DB_ENDIAN -DBN_DIV3W::-D_SGI_MP_SOURCE:::DES_PTR RC4_CHAR RC4_CHUNK_LL DES_RISC2 DES_UNROLL BF_PTR SIXTY_FOUR_BIT:${mips3_irix_asm}:dlfcn:irix-shared:::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
+"irix-mips3-gcc","gcc:-mabi=n32 -mmips-as -O3 -DTERMIOS -DB_ENDIAN -DBN_DIV3W::-D_SGI_MP_SOURCE:::MD2_CHAR RC4_INDEX RC4_CHAR RC4_CHUNK_LL DES_UNROLL DES_RISC2 DES_PTR BF_PTR SIXTY_FOUR_BIT:${mips3_irix_asm}:dlfcn:irix-shared::-mabi=n32:.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
+"irix-mips3-cc", "cc:-n32 -mips3 -O2 -use_readonly_const -DTERMIOS -DB_ENDIAN -DBN_DIV3W::-D_SGI_MP_SOURCE:::DES_PTR RC4_CHAR RC4_CHUNK_LL DES_RISC2 DES_UNROLL BF_PTR SIXTY_FOUR_BIT:${mips3_irix_asm}:dlfcn:irix-shared::-n32:.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
 # N64 ABI builds.
-"irix64-mips4-gcc","gcc:-mabi=64 -mips4 -mmips-as -O3 -DTERMIOS -DB_ENDIAN -DBN_DIV3W::-D_SGI_MP_SOURCE:::RC4_CHAR RC4_CHUNK DES_RISC2 DES_UNROLL SIXTY_FOUR_BIT_LONG:${mips3_irix_asm}:dlfcn:irix-shared:::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
-"irix64-mips4-cc", "cc:-64 -mips4 -O2 -use_readonly_const -DTERMIOS -DB_ENDIAN -DBN_DIV3W::-D_SGI_MP_SOURCE:::RC4_CHAR RC4_CHUNK DES_RISC2 DES_UNROLL SIXTY_FOUR_BIT_LONG:${mips3_irix_asm}:dlfcn:irix-shared:::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
+"irix64-mips4-gcc","gcc:-mabi=64 -mips4 -mmips-as -O3 -DTERMIOS -DB_ENDIAN -DBN_DIV3W::-D_SGI_MP_SOURCE:::RC4_CHAR RC4_CHUNK DES_RISC2 DES_UNROLL SIXTY_FOUR_BIT_LONG:${mips3_irix_asm}:dlfcn:irix-shared::-mabi=64:.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
+"irix64-mips4-cc", "cc:-64 -mips4 -O2 -use_readonly_const -DTERMIOS -DB_ENDIAN -DBN_DIV3W::-D_SGI_MP_SOURCE:::RC4_CHAR RC4_CHUNK DES_RISC2 DES_UNROLL SIXTY_FOUR_BIT_LONG:${mips3_irix_asm}:dlfcn:irix-shared::-64:.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
 
 #### Unified HP-UX ANSI C configs.
 # Special notes:
@@ -255,56 +271,56 @@ my %table=(
 #
 #!#"hpux-parisc-cc","cc:-Ae +O3 +ESlit -z -DB_ENDIAN -DBN_DIV2W -DMD32_XARRAY::::-ldld:BN_LLONG DES_PTR DES_UNROLL DES_RISC1::::::::::dl",
 # Since there is mention of this in shlib/hpux10-cc.sh
-"hpux-parisc-cc-o4","cc:-Ae +O4 +ESlit -z -DB_ENDIAN -DBN_DIV2W -DMD32_XARRAY::::-ldld:BN_LLONG DES_PTR DES_UNROLL DES_RISC1::::::::::dl:hpux-shared:+Z::.sl.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
-"hpux-parisc-gcc","gcc:-O3 -DB_ENDIAN -DBN_DIV2W::::-Wl,+s -ldld:BN_LLONG DES_PTR DES_UNROLL DES_RISC1::::::::::dl:hpux-shared:-fPIC::.sl.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
-"hpux64-parisc-cc","cc:-Ae +DD64 +O3 +ESlit -z -DB_ENDIAN -DMD32_XARRAY::-D_REENTRANT::-ldl:SIXTY_FOUR_BIT_LONG MD2_CHAR RC4_INDEX RC4_CHAR DES_UNROLL DES_RISC1 DES_INT::::::::::dlfcn:hpux64-shared:+Z::.sl.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
+"hpux-parisc-cc-o4","cc:-Ae +O4 +ESlit -z -DB_ENDIAN -DBN_DIV2W -DMD32_XARRAY::::-Wl,+cdp,../%3a,+cdp,./%3a,+s,+b,\$(INSTALLTOP)/lib -ldld:BN_LLONG DES_PTR DES_UNROLL DES_RISC1::::::::::dl:hpux-shared:+Z:-b:.sl.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
+"hpux-parisc-gcc","gcc:-O3 -DB_ENDIAN -DBN_DIV2W::::-Wl,+cdp,../%3a,+cdp,./%3a,+s,+b,\$(INSTALLTOP)/lib -ldld:BN_LLONG DES_PTR DES_UNROLL DES_RISC1::::::::::dl:hpux-shared:-fPIC:-shared:.sl.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
+"hpux64-parisc-cc","cc:-Ae +DD64 +O3 +ESlit -z -DB_ENDIAN -DMD32_XARRAY::-D_REENTRANT::-Wl,+s,+b,\$(INSTALLTOP)/lib -ldl:SIXTY_FOUR_BIT_LONG MD2_CHAR RC4_INDEX RC4_CHAR DES_UNROLL DES_RISC1 DES_INT::::::::::dlfcn:hpux-shared:+Z:+DD64 -b:.sl.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
 # 64bit PARISC for GCC without optimization, which seems to make problems.
 # Submitted by <ross.alexander@uk.neceur.com>
-"hpux64-parisc-gcc","gcc:-DB_ENDIAN -DMD32_XARRAY::-D_REENTRANT::-ldl:SIXTY_FOUR_BIT_LONG MD2_CHAR RC4_INDEX RC4_CHAR DES_UNROLL DES_RISC1 DES_INT::::::::::dlfcn:hpux64-shared:-fpic::.sl.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
+"hpux64-parisc-gcc","gcc:-DB_ENDIAN -DMD32_XARRAY::-D_REENTRANT::-Wl,+s,+b,\$(INSTALLTOP)/lib -ldl:SIXTY_FOUR_BIT_LONG MD2_CHAR RC4_INDEX RC4_CHAR DES_UNROLL DES_RISC1 DES_INT::::::::::dlfcn:hpux-shared:-fpic:-shared:.sl.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
+"hpux64-parisc2-gcc","gcc:-O3 -DB_ENDIAN -DMD32_XARRAY::-D_REENTRANT::-Wl,+s,+b,\$(INSTALLTOP)/lib -ldl:SIXTY_FOUR_BIT_LONG MD2_CHAR RC4_INDEX RC4_CHAR DES_UNROLL DES_RISC1 DES_INT:asm/pa-risc2W.o:::::::::dlfcn:hpux-shared:-fPIC:-shared:.sl.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
 
 # IA-64 targets
-# I have no idea if this one actually works, feedback needed. <appro>
-"hpux-ia64-cc","cc:-Ae +DD32 +O3 +ESlit -z -DB_ENDIAN::-D_REENTRANT::-ldl:SIXTY_FOUR_BIT MD2_CHAR RC4_INDEX RC4_CHAR DES_UNROLL DES_RISC1 DES_INT:asm/ia64-cpp.o:::::::::dlfcn:hpux-shared:+Z::.sl.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
+"hpux-ia64-cc","cc:-Ae +DD32 +O3 +Olit=all -z -DB_ENDIAN::-D_REENTRANT::-Wl,+s,+b,\$(INSTALLTOP)/lib -ldl:SIXTY_FOUR_BIT MD2_CHAR RC4_INDEX RC4_CHAR DES_UNROLL DES_RISC1 DES_INT:asm/ia64-cpp.o::::asm/sha1-ia64.o::asm/rc4-ia64.o:::dlfcn:hpux-shared:+Z:-b:.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
 # Frank Geurts <frank.geurts@nl.abnamro.com> has patiently assisted with
 # with debugging of the following config.
-"hpux64-ia64-cc","cc:-Ae +DD64 +O3 +ESlit -z -DB_ENDIAN::-D_REENTRANT::-ldl:SIXTY_FOUR_BIT_LONG MD2_CHAR RC4_INDEX RC4_CHAR DES_UNROLL DES_RISC1 DES_INT:asm/ia64-cpp.o:::::::::dlfcn:hpux64-shared:+Z::.sl.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
+"hpux64-ia64-cc","cc:-Ae +DD64 +O3 +Olit=all -z -DB_ENDIAN::-D_REENTRANT::-Wl,+s,+b,\$(INSTALLTOP)/lib -ldl:SIXTY_FOUR_BIT_LONG MD2_CHAR RC4_INDEX RC4_CHAR DES_UNROLL DES_RISC1 DES_INT:asm/ia64-cpp.o::::asm/sha1-ia64.o::asm/rc4-ia64.o:::dlfcn:hpux-shared:+Z:+DD64 -b:.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
 
 # More attempts at unified 10.X and 11.X targets for HP C compiler.
 #
 # Chris Ruemmler <ruemmler@cup.hp.com>
 # Kevin Steves <ks@hp.se>
-"hpux-parisc-cc","cc:+O3 +Optrs_strongly_typed +Olibcalls -Ae +ESlit -DB_ENDIAN -DBN_DIV2W -DMD32_XARRAY::-D_REENTRANT::-Wl,+s -ldld:MD2_CHAR RC4_INDEX RC4_CHAR DES_UNROLL DES_RISC1 DES_INT::::::::::dl:hpux-shared:+Z::.sl.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
-"hpux-parisc2-cc","cc:+DA2.0 +DS2.0 +O3 +Optrs_strongly_typed +Olibcalls -Ae +ESlit -DB_ENDIAN -DMD32_XARRAY::-D_REENTRANT::-Wl,+s -ldld:SIXTY_FOUR_BIT MD2_CHAR RC4_INDEX RC4_CHAR DES_UNROLL DES_RISC1 DES_INT:asm/pa-risc2.o:::::::::dl:hpux-shared:+Z::.sl.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
-"hpux64-parisc2-cc","cc:+DD64 +O3 +Optrs_strongly_typed +Olibcalls -Ae +ESlit -DB_ENDIAN -DMD32_XARRAY::-D_REENTRANT::-ldl:SIXTY_FOUR_BIT_LONG MD2_CHAR RC4_INDEX RC4_CHAR DES_UNROLL DES_RISC1 DES_INT:asm/pa-risc2W.o:::::::::dlfcn:hpux64-shared:+Z::.sl.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
+"hpux-parisc-cc","cc:+O3 +Optrs_strongly_typed -Ae +ESlit -DB_ENDIAN -DBN_DIV2W -DMD32_XARRAY::-D_REENTRANT::-Wl,+cdp,../%3a,+cdp,./%3a,+s,+b,\$(INSTALLTOP)/lib -ldld:MD2_CHAR RC4_INDEX RC4_CHAR DES_UNROLL DES_RISC1 DES_INT::::::::::dl:hpux-shared:+Z:-b:.sl.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
+"hpux-parisc2-cc","cc:+DA2.0 +DS2.0 +O3 +Optrs_strongly_typed -Ae +ESlit -DB_ENDIAN -DMD32_XARRAY::-D_REENTRANT::-Wl,+cdp,../%3a,+cdp,./%3a,+s,+b,\$(INSTALLTOP)/lib -ldld:SIXTY_FOUR_BIT MD2_CHAR RC4_INDEX RC4_CHAR DES_UNROLL DES_RISC1 DES_INT:asm/pa-risc2.o:::::::::dl:hpux-shared:+Z:-b:.sl.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
+"hpux64-parisc2-cc","cc:+DD64 +O3 +Optrs_strongly_typed -Ae +ESlit -DB_ENDIAN -DMD32_XARRAY::-D_REENTRANT::-Wl,+s,+b,\$(INSTALLTOP)/lib -ldl:SIXTY_FOUR_BIT_LONG MD2_CHAR RC4_INDEX RC4_CHAR DES_UNROLL DES_RISC1 DES_INT:asm/pa-risc2W.o:::::::::dlfcn:hpux-shared:+Z:+DD64 -b:.sl.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
 # Isn't the line below meaningless? HP-UX cc optimizes for host by default.
 # hpux-parisc1_0-cc with +DAportable flag would make more sense. <appro>
-"hpux-parisc1_1-cc","cc:+DA1.1 +DS1.1 +O3 +Optrs_strongly_typed +Olibcalls -Ae +ESlit -DB_ENDIAN -DMD32_XARRAY::-D_REENTRANT::-Wl,+s -ldld:MD2_CHAR RC4_INDEX RC4_CHAR DES_UNROLL DES_RISC1 DES_INT::::::::::dl:hpux-shared:+Z::.sl.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
+"hpux-parisc1_1-cc","cc:+DA1.1 +DS1.1 +O3 +Optrs_strongly_typed -Ae +ESlit -DB_ENDIAN -DMD32_XARRAY::-D_REENTRANT::-Wl,+cdp,../%3a,+cdp,./%3a,+s,+b,\$(INSTALLTOP)/lib -ldld:MD2_CHAR RC4_INDEX RC4_CHAR DES_UNROLL DES_RISC1 DES_INT::::::::::dl:hpux-shared:+Z:-b:.sl.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
 
 # HPUX 9.X config.
 # Don't use the bundled cc.  It is broken.  Use HP ANSI C if possible, or
 # egcs.  gcc 2.8.1 is also broken.
 
-"hpux-cc",	"cc:-DB_ENDIAN -DBN_DIV2W -DMD32_XARRAY -Ae +ESlit +O3 -z::(unknown)::-Wl,+s -ldld:BN_LLONG DES_PTR DES_UNROLL DES_RISC1::::::::::dl:hpux-shared:+Z::.sl.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
+"hpux-cc",	"cc:-DB_ENDIAN -DBN_DIV2W -DMD32_XARRAY -Ae +ESlit +O3 -z::(unknown)::-Wl,+s,+b,\$(INSTALLTOP)/lib -ldld:BN_LLONG DES_PTR DES_UNROLL DES_RISC1::::::::::dl:hpux-shared:+Z:-b:.sl.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
 # If hpux-cc fails (e.g. during "make test"), try the next one; otherwise,
 # please report your OS and compiler version to the openssl-bugs@openssl.org
 # mailing list.
-"hpux-brokencc",	"cc:-DB_ENDIAN -DBN_DIV2W -Ae +ESlit +O2 -z::(unknown)::-Wl,+s -ldld:DES_PTR DES_UNROLL DES_RISC1::::::::::dl:hpux-shared:+Z::.sl.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
+"hpux-brokencc",	"cc:-DB_ENDIAN -DBN_DIV2W -Ae +ESlit +O2 -z::(unknown)::-Wl,+s,+b,\$(INSTALLTOP)/lib -ldld:DES_PTR DES_UNROLL DES_RISC1::::::::::dl:hpux-shared:+Z:-b:.sl.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
 
-"hpux-gcc",	"gcc:-DB_ENDIAN -DBN_DIV2W -O3::(unknown)::-Wl,+s -ldld:BN_LLONG DES_PTR DES_UNROLL DES_RISC1::::::::::dl:hpux-shared:-fPIC::.sl.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
+"hpux-gcc",	"gcc:-DB_ENDIAN -DBN_DIV2W -O3::(unknown)::-Wl,+s,+b,\$(INSTALLTOP)/lib -ldld:BN_LLONG DES_PTR DES_UNROLL DES_RISC1::::::::::dl:hpux-shared:-fPIC:-shared:.sl.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
 # If hpux-gcc fails, try this one:
-"hpux-brokengcc",	"gcc:-DB_ENDIAN -DBN_DIV2W -O3::(unknown)::-Wl,+s -ldld:DES_PTR DES_UNROLL DES_RISC1::::::::::dl:hpux-shared:-fPIC::.sl.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
+"hpux-brokengcc",	"gcc:-DB_ENDIAN -DBN_DIV2W -O3::(unknown)::-Wl,+s,+b,\$(INSTALLTOP)/lib -ldld:DES_PTR DES_UNROLL DES_RISC1::::::::::dl:hpux-shared:-fPIC:-shared:.sl.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
 
 # HPUX 9.X on Motorola 68k platforms with gcc
 "hpux-m68k-gcc",  "gcc:-DB_ENDIAN -DBN_DIV2W -O3::(unknown):::BN_LLONG DES_PTR DES_UNROLL:::::::::::::",
 
 # HPUX 10.X config.  Supports threads.
-"hpux10-cc",	"cc:-DB_ENDIAN -DBN_DIV2W -DMD32_XARRAY -Ae +ESlit +O3 -z::-D_REENTRANT::-Wl,+s -ldld:BN_LLONG DES_PTR DES_UNROLL DES_RISC1::::::::::dl:hpux-shared:+Z::.sl.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
+"hpux10-cc",	"cc:-DB_ENDIAN -DBN_DIV2W -DMD32_XARRAY -Ae +ESlit +O3 -z::-D_REENTRANT::-Wl,+s,+b,\$(INSTALLTOP)/lib -ldld:BN_LLONG DES_PTR DES_UNROLL DES_RISC1::::::::::dl:hpux-shared:+Z:-b:.sl.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
 # If hpux10-cc fails, try this one (if still fails, try deleting BN_LLONG):
-"hpux10-brokencc",	"cc:-DB_ENDIAN -DBN_DIV2W -Ae +ESlit +O2 -z::-D_REENTRANT::-Wl,+s -ldld:BN_LLONG DES_PTR DES_UNROLL DES_RISC1::::::::::dl:hpux-shared:+Z::.sl.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
+"hpux10-brokencc",	"cc:-DB_ENDIAN -DBN_DIV2W -Ae +ESlit +O2 -z::-D_REENTRANT::-Wl,+s,+b,\$(INSTALLTOP)/lib -ldld:BN_LLONG DES_PTR DES_UNROLL DES_RISC1::::::::::dl:hpux-shared:+Z:-b:.sl.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
 
-"hpux10-gcc",	"gcc:-DB_ENDIAN -DBN_DIV2W -O3::-D_REENTRANT::-Wl,+s -ldld:BN_LLONG DES_PTR DES_UNROLL DES_RISC1::::::::::dl:hpux-shared:-fPIC::.sl.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
+"hpux10-gcc",	"gcc:-DB_ENDIAN -DBN_DIV2W -O3::-D_REENTRANT::-Wl,+s,+b,\$(INSTALLTOP)/lib -ldld:BN_LLONG DES_PTR DES_UNROLL DES_RISC1::::::::::dl:hpux-shared:-fPIC:-shared:.sl.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
 # If hpux10-gcc fails, try this one:
-"hpux10-brokengcc",	"gcc:-DB_ENDIAN -DBN_DIV2W -O3::-D_REENTRANT::-Wl,+s -ldld:DES_PTR DES_UNROLL DES_RISC1::::::::::dl:hpux-shared:-fPIC::.sl.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
+"hpux10-brokengcc",	"gcc:-DB_ENDIAN -DBN_DIV2W -O3::-D_REENTRANT::-Wl,+s,+b,\$(INSTALLTOP)/lib -ldld:DES_PTR DES_UNROLL DES_RISC1::::::::::dl:hpux-shared:-fPIC:-shared:.sl.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
 
 # HPUX 11.X from www.globus.org.
 # Only works on PA-RISC 2.0 cpus, and not optimized.  Why?
@@ -383,19 +399,25 @@ my %table=(
 "debug-linux-pentium","gcc:-DBN_DEBUG -DREF_CHECK -DCONF_DEBUG -DBN_CTX_DEBUG -DCRYPTO_MDEBUG -DL_ENDIAN -DTERMIO -g -mcpu=pentium -Wall::-D_REENTRANT::-ldl:BN_LLONG ${x86_gcc_des} ${x86_gcc_opts}:${x86_elf_asm}:dlfcn",
 "debug-linux-ppro","gcc:-DBN_DEBUG -DREF_CHECK -DCONF_DEBUG -DBN_CTX_DEBUG -DCRYPTO_MDEBUG -DL_ENDIAN -DTERMIO -g -mcpu=pentiumpro -Wall::-D_REENTRANT::-ldl:BN_LLONG ${x86_gcc_des} ${x86_gcc_opts}:${x86_elf_asm}:dlfcn",
 "debug-linux-elf","gcc:-DBN_DEBUG -DREF_CHECK -DCONF_DEBUG -DBN_CTX_DEBUG -DCRYPTO_MDEBUG -DL_ENDIAN -DTERMIO -g -m486 -Wall::-D_REENTRANT::-lefence -ldl:BN_LLONG ${x86_gcc_des} ${x86_gcc_opts}:${x86_elf_asm}:dlfcn:linux-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
-"debug-linux-elf-noefence","gcc:-DBN_DEBUG -DREF_CHECK -DCONF_DEBUG -DBN_CTX_DEBUG -DCRYPTO_MDEBUG -DL_ENDIAN -DTERMIO -g -m486 -Wall::-D_REENTRANT::-ldl:BN_LLONG ${x86_gcc_des} ${x86_gcc_opts}:${x86_elf_asm}:dlfcn",
+"debug-linux-elf-noefence","gcc:-DBN_DEBUG -DREF_CHECK -DCONF_DEBUG -DBN_CTX_DEBUG -DCRYPTO_MDEBUG -DL_ENDIAN -DTERMIO -g -m486 -Wall::-D_REENTRANT::-ldl:BN_LLONG ${x86_gcc_des} ${x86_gcc_opts}:${x86_elf_asm}:dlfcn:linux-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
 "linux-aout",	"gcc:-DL_ENDIAN -DTERMIO -O3 -fomit-frame-pointer -m486 -Wall::(unknown):::BN_LLONG ${x86_gcc_des} ${x86_gcc_opts}:${x86_out_asm}",
-"linux-mipsel",   "gcc:-DL_ENDIAN -DTERMIO -O3 -fomit-frame-pointer -Wall::(unknown):::BN_LLONG:::",
-"linux-mips",   "gcc:-DB_ENDIAN -DTERMIO -O3 -fomit-frame-pointer -Wall::(unknown):::BN_LLONG:::",
-"linux-ppc",    "gcc:-DB_ENDIAN -DTERMIO -O3 -fomit-frame-pointer -Wall::-D_REENTRANT::-ldl:BN_LLONG RC4_CHAR RC4_CHUNK DES_RISC1 DES_UNROLL::::::::::dlfcn:linux-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
+"linux-mipsel",   "gcc:-DL_ENDIAN -DTERMIO -O3 -fomit-frame-pointer -Wall::-D_REENTRANT::-ldl:BN_LLONG RC2_CHAR RC4_INDEX DES_INT DES_UNROLL DES_RISC2::::::::::dlfcn:linux-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
+"linux-mips",   "gcc:-DB_ENDIAN -DTERMIO -O3 -fomit-frame-pointer -Wall::-D_REENTRANT::-ldl:BN_LLONG RC2_CHAR RC4_INDEX DES_INT DES_UNROLL DES_RISC2::::::::::dlfcn:linux-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
+"linux-ppc",    "gcc:-DB_ENDIAN -DTERMIO -O3 -fomit-frame-pointer -Wall::-D_REENTRANT::-ldl:BN_LLONG RC4_CHAR RC4_CHUNK DES_RISC1 DES_UNROLL:asm/linux_ppc32.o:::::::::dlfcn:linux-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
+# -bpowerpc64-linux is transient option, -m64 should be the one to use...
+"linux-ppc64",  "gcc:-bpowerpc64-linux -DB_ENDIAN -DTERMIO -O3 -fomit-frame-pointer -Wall::-D_REENTRANT::-ldl:SIXTY_FOUR_BIT_LONG RC4_CHAR RC4_CHUNK DES_RISC1 DES_UNROLL:asm/linux_ppc64.o:::::::::dlfcn:linux-shared:-fPIC:-bpowerpc64-linux:.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
 "linux-m68k",   "gcc:-DB_ENDIAN -DTERMIO -O2 -fomit-frame-pointer -Wall::-D_REENTRANT:::BN_LLONG::",
 "linux-s390",	"gcc:-DB_ENDIAN -DTERMIO -DNO_ASM -O3 -fomit-frame-pointer -Wall::-D_REENTRANT::-ldl:BN_LLONG::::::::::dlfcn:linux-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
 "linux-s390x",	"gcc:-DB_ENDIAN -DTERMIO -DNO_ASM -O3 -fomit-frame-pointer -Wall::-D_REENTRANT::-ldl:SIXTY_FOUR_BIT_LONG::::::::::dlfcn:linux-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
-"linux-ia64",   "gcc:-DL_ENDIAN -DTERMIO -O3 -fomit-frame-pointer -Wall::-D_REENTRANT::-ldl:SIXTY_FOUR_BIT_LONG RC4_CHUNK RC4_CHAR:asm/ia64.o:::::::::dlfcn:linux-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
+"linux-ia64",   "gcc:-DL_ENDIAN -DTERMIO -O3 -fomit-frame-pointer -Wall::-D_REENTRANT::-ldl:SIXTY_FOUR_BIT_LONG RC4_CHUNK RC4_CHAR:asm/ia64.o::::asm/sha1-ia64.o::asm/rc4-ia64.o:::dlfcn:linux-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
+"linux-ia64-ecc",   "ecc:-DL_ENDIAN -DTERMIO -O2 -Wall -no_cpprt::-D_REENTRANT::-ldl:SIXTY_FOUR_BIT_LONG RC4_CHUNK RC4_CHAR:asm/ia64.o::::asm/sha1-ia64.o::asm/rc4-ia64.o:::dlfcn:linux-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
+"linux-x86_64", "gcc:-m64 -DL_ENDIAN -DTERMIO -O3 -Wall -DMD32_REG_T=int::-D_REENTRANT::-ldl:SIXTY_FOUR_BIT_LONG RC4_CHUNK RC4_CHAR BF_PTR2 DES_INT DES_UNROLL:asm/x86_64-gcc.o::::::asm/rc4-x86_64.o:::dlfcn:linux-shared:-fPIC:-m64:.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
 "NetBSD-sparc",	"gcc:-DTERMIOS -O3 -fomit-frame-pointer -mv8 -Wall -DB_ENDIAN::(unknown):::BN_LLONG MD2_CHAR RC4_INDEX DES_UNROLL::::::::::dlfcn:bsd-gcc-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
 "NetBSD-m68",	"gcc:-DTERMIOS -O3 -fomit-frame-pointer -Wall -DB_ENDIAN::(unknown):::BN_LLONG MD2_CHAR RC4_INDEX DES_UNROLL::::::::::dlfcn:bsd-gcc-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
 "NetBSD-x86",	"gcc:-DTERMIOS -O3 -fomit-frame-pointer -m486 -Wall::(unknown):::BN_LLONG ${x86_gcc_des} ${x86_gcc_opts}::::::::::dlfcn:bsd-gcc-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
 "FreeBSD-elf",  "gcc:-DTERMIOS -DL_ENDIAN -fomit-frame-pointer -O3 -m486 -Wall::-pthread -D_REENTRANT -D_THREAD_SAFE -D_THREADSAFE:::BN_LLONG ${x86_gcc_des} ${x86_gcc_opts}:${x86_elf_asm}:dlfcn:bsd-gcc-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
+"FreeBSD-sparc64","gcc:-DB_ENDIAN -DTERMIOS -O3 -fomit-frame-pointer::-pthread -D_REENTRANT -D_THREAD_SAFE -D_THREADSAFE:::SIXTY_FOUR_BIT_LONG DES_INT DES_PTR DES_RISC2 BF_PTR::::::::::dlfcn:bsd-gcc-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
+"FreeBSD-ia64","gcc:-DL_ENDIAN -DTERMIOS -O -fomit-frame-pointer::(unknown):::SIXTY_FOUR_BIT_LONG RC4_CHUNK RC4_CHAR:asm/ia64-cpp.o:::::::::dlfcn:bsd-gcc-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
 "FreeBSD",      "gcc:-DTERMIOS -DL_ENDIAN -fomit-frame-pointer -O3 -m486 -Wall::(unknown):::BN_LLONG ${x86_gcc_des} ${x86_gcc_opts}:${x86_out_asm}",
 "bsdi-gcc",     "gcc:-O3 -ffast-math -DL_ENDIAN -DPERL5 -m486::(unknown):::RSA_LLONG ${x86_gcc_des} ${x86_gcc_opts}:${x86_bsdi_asm}",
 "bsdi-elf-gcc",     "gcc:-DPERL5 -DL_ENDIAN -fomit-frame-pointer -O3 -m486 -Wall::(unknown)::-ldl:BN_LLONG ${x86_gcc_des} ${x86_gcc_opts}:${x86_elf_asm}:dlfcn:bsd-gcc-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
@@ -403,7 +425,7 @@ my %table=(
 "nextstep3.3",	"cc:-O3 -Wall:<libc.h>:(unknown):::BN_LLONG ${x86_gcc_des} ${x86_gcc_opts}:::",
 
 # NCR MP-RAS UNIX ver 02.03.01
-"ncr-scde","cc:-O6 -Xa -Hoff=BEHAVED -686 -Hwide -Hiw::(unknown)::-lsocket -lnsl:${x86_gcc_des} ${x86_gcc_opts}:::",
+"ncr-scde","cc:-O6 -Xa -Hoff=BEHAVED -686 -Hwide -Hiw::(unknown)::-lsocket -lnsl -lc89:${x86_gcc_des} ${x86_gcc_opts}:::",
 
 # QNX 4
 "qnx4",	"cc:-DL_ENDIAN -DTERMIO::(unknown):::${x86_gcc_des} ${x86_gcc_opts}:",
@@ -412,35 +434,39 @@ my %table=(
 "qnx6",	"cc:-DL_ENDIAN -DTERMIOS::(unknown)::-lsocket:${x86_gcc_des} ${x86_gcc_opts}:",
 
 # Linux on ARM
-"linux-elf-arm","gcc:-DL_ENDIAN -DTERMIO -O3 -fomit-frame-pointer -Wall::-D_REENTRANT:::BN_LLONG::::::::::dlfcn:linux-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
+# ARM comes in both little- and big-endian flavors. The following line is
+# endian neutral, but ./config is free to throw in -D[BL]_ENDIAN...
+"linux-elf-arm","gcc:-DTERMIO -O3 -fomit-frame-pointer -Wall::-D_REENTRANT::-ldl:BN_LLONG::::::::::dlfcn:linux-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
 
+# SCO/Caldera targets.
+#
+# Originally we had like unixware-*, unixware-*-pentium, unixware-*-p6, etc.
+# Now we only have blended unixware-* as it's the only one used by ./config.
+# If you want to optimize for particular microarchitecture, bypass ./config
+# and './Configure unixware-7 -Kpentium_pro' or whatever appropriate.
+# Note that not all targets include assembler support. Mostly because of
+# lack of motivation to support out-of-date platforms with out-of-date
+# compiler drivers and assemblers. Tim Rice <tim@multitalents.net> has
+# patiently assisted to debug most of it.
+#
 # UnixWare 2.0x fails destest with -O
 "unixware-2.0","cc:-DFILIO_H -DNO_STRINGS_H::-Kthread::-lsocket -lnsl -lresolv -lx:${x86_gcc_des} ${x86_gcc_opts}:::",
-"unixware-2.0-pentium","cc:-DFILIO_H -DNO_STRINGS_H -Kpentium::-Kthread::-lsocket -lnsl -lresolv -lx:MD2_CHAR RC4_INDEX ${x86_gcc_des}::",
-
-# UnixWare 2.1
 "unixware-2.1","cc:-O -DFILIO_H::-Kthread::-lsocket -lnsl -lresolv -lx:${x86_gcc_des} ${x86_gcc_opts}:::",
-"unixware-2.1-pentium","cc:-O -DFILIO_H -Kpentium::-Kthread::-lsocket -lnsl -lresolv -lx:MD2_CHAR RC4_INDEX ${x86_gcc_des}::",
-"unixware-2.1-p6","cc:-O -DFILIO_H -Kp6::-Kthread::-lsocket -lnsl -lresolv -lx:MD2_CHAR RC4_INDEX ${x86_gcc_des}::",
+"unixware-7","cc:-O -DFILIO_H -Kalloca::-Kthread::-lsocket -lnsl:BN_LLONG MD2_CHAR RC4_INDEX ${x86_gcc_des}:${x86_elf_asm}:dlfcn:svr5-shared:-Kpic::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
+"unixware-7-gcc","gcc:-DL_ENDIAN -DFILIO_H -O3 -fomit-frame-pointer -m486 -Wall::-D_REENTRANT::-lsocket -lnsl:BN_LLONG ${x86_gcc_des} ${x86_gcc_opts}:${x86_elf_asm}:dlfcn:gnu-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
+"OpenUNIX-8","cc:-O -DFILIO_H -Kalloca::-Kthread::-lsocket -lnsl:BN_LLONG MD2_CHAR RC4_INDEX ${x86_gcc_des}:${x86_elf_asm}:dlfcn:svr5-shared:-Kpic::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
+"OpenUNIX-8-gcc","gcc:-O -DFILIO_H -fomit-frame-pointer::-pthread::-lsocket -lnsl:BN_LLONG MD2_CHAR RC4_INDEX ${x86_gcc_des}:${x86_elf_asm}:dlfcn:svr5-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
+"sco3-gcc",  "gcc:-O3 -fomit-frame-pointer -Dssize_t=int -DNO_SYS_UN_H::(unknown)::-lsocket:BN_LLONG ${x86_gcc_des} ${x86_gcc_opts}:::", # the SCO assembler doesn't seem to like our assembler files ...
+# SCO 5 - Ben Laurie <ben@algroup.co.uk> says the -O breaks the SCO cc.
+"sco5-cc",  "cc:-belf::(unknown)::-lsocket -lnsl:${x86_gcc_des} ${x86_gcc_opts}:${x86_elf_asm}:dlfcn:svr3-shared:-Kpic::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
+"sco5-gcc",  "gcc:-O3 -fomit-frame-pointer::(unknown)::-lsocket -lnsl:BN_LLONG ${x86_gcc_des} ${x86_gcc_opts}:${x86_elf_asm}:dlfcn:svr3-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
 
-# UnixWare 7
-"unixware-7","cc:-O -DFILIO_H -Kalloca::-Kthread::-lsocket -lnsl:BN_LLONG MD2_CHAR RC4_INDEX ${x86_gcc_des}::::::::::dlfcn:svr5-shared:-Kpic::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
-"unixware-7-pentium","cc:-O -DFILIO_H -Kalloca -Kpentium::-Kthread::-lsocket -lnsl:BN_LLONG MD2_CHAR RC4_INDEX ${x86_gcc_des}::::::::::dlfcn:svr5-shared:-Kpic::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
-"unixware-7-pentium_pro","cc:-O -DFILIO_H -Kalloca -Kpentium_pro::-Kthread::-lsocket -lnsl:BN_LLONG MD2_CHAR RC4_INDEX ${x86_gcc_des}::::::::::dlfcn:svr5-shared:-Kpic::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
-"unixware-7-gcc","gcc:-DL_ENDIAN -DFILIO_H -O3 -fomit-frame-pointer -m486 -Wall::-D_REENTRANT::-lsocket -lnsl:BN_LLONG ${x86_gcc_des} ${x86_gcc_opts}::::::::::dlfcn:gnu-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
-
-# OpenUNIX 8
-"OpenUNIX-8","cc:-O -DFILIO_H -Kalloca::-Kthread::-lsocket -lnsl:BN_LLONG MD2_CHAR RC4_INDEX ${x86_gcc_des}::::::::::dlfcn:svr5-shared:-Kpic::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
-"OpenUNIX-8-gcc","gcc:-O -DFILIO_H -fomit-frame-pointer::-pthread::-lsocket -lnsl:BN_LLONG MD2_CHAR RC4_INDEX ${x86_gcc_des}::::::::::dlfcn:svr5-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
-"OpenUNIX-8-pentium","cc:-O -DFILIO_H -Kalloca -Kpentium::-Kthread::-lsocket -lnsl:BN_LLONG MD2_CHAR RC4_INDEX ${x86_gcc_des}::::::::::dlfcn:svr5-shared:-Kpic::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
-"OpenUNIX-8-pentium_pro","cc:-O -DFILIO_H -Kalloca -Kpentium_pro::-Kthread::-lsocket -lnsl:BN_LLONG MD2_CHAR RC4_INDEX ${x86_gcc_des}::::::::::dlfcn:svr5-shared:-Kpic::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
 
 # IBM's AIX.
-"aix-cc",   "cc:-O -DB_ENDIAN -qmaxmem=16384::(unknown):AIX::BN_LLONG RC4_CHAR:::",
-"aix-gcc",  "gcc:-O3 -DB_ENDIAN::(unknown):AIX::BN_LLONG RC4_CHAR:::",
-"aix43-cc",   "cc:-O -DAIX -DB_ENDIAN -qmaxmem=16384::(unknown):::BN_LLONG RC4_CHAR::::::::::dlfcn:",
-"aix43-gcc",  "gcc:-O1 -DAIX -DB_ENDIAN::(unknown):::BN_LLONG RC4_CHAR::::::::::dlfcn:",
-"aix64-cc",   "cc:-O -DAIX -DB_ENDIAN -qmaxmem=16384 -q64::(unknown):::SIXTY_FOUR_BIT_LONG RC4_CHAR::::::::::dlfcn::::::-X 64",
+"aix3-cc",    "cc:-O -DB_ENDIAN -qmaxmem=16384::(unknown):AIX::BN_LLONG RC4_CHAR:::",
+"aix-gcc",    "gcc:-O3 -DB_ENDIAN::-D_THREAD_SAFE:AIX::BN_LLONG RC4_CHAR:asm/aix_ppc32.o:::::::::dlfcn:",
+"aix-cc",     "cc:-q32 -O -DB_ENDIAN -qmaxmem=16384::-qthreaded:AIX::BN_LLONG RC4_CHAR:asm/aix_ppc32.o:::::::::dlfcn:aix-shared::-q32:.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)::-X 32",
+"aix64-cc",   "cc:-q64 -O -DB_ENDIAN -qmaxmem=16384::-qthreaded:AIX::SIXTY_FOUR_BIT_LONG RC4_CHAR:asm/aix_ppc64.o:::::::::dlfcn:aix-shared::-q64:.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)::-X 64",
 
 #
 # Cray T90 and similar (SDSC)
@@ -473,15 +499,6 @@ my %table=(
 "dgux-R4-gcc",	"gcc:-O3 -fomit-frame-pointer::(unknown)::-lnsl -lsocket:RC4_INDEX DES_UNROLL:::",
 "dgux-R4-x86-gcc",	"gcc:-O3 -fomit-frame-pointer -DL_ENDIAN::(unknown)::-lnsl -lsocket:BN_LLONG ${x86_gcc_des} ${x86_gcc_opts}:${x86_elf_asm}",
 
-# SCO 3 - Tim Rice <tim@multitalents.net>
-"sco3-gcc",  "gcc:-O3 -fomit-frame-pointer -Dssize_t=int -DNO_SYS_UN_H::(unknown)::-lsocket:BN_LLONG ${x86_gcc_des} ${x86_gcc_opts}:::", # the SCO assembler doesn't seem to like our assembler files ...
-
-# SCO 5 - Ben Laurie <ben@algroup.co.uk> says the -O breaks the
-# SCO cc.
-"sco5-cc",  "cc:-belf::(unknown)::-lsocket -lresolv -lnsl:${x86_gcc_des} ${x86_gcc_opts}::::::::::dlfcn:svr3-shared:-Kpic", # des options?
-"sco5-cc-pentium",  "cc:-Kpentium::(unknown)::-lsocket:${x86_gcc_des} ${x86_gcc_opts}:::", # des options?
-"sco5-gcc",  "gcc:-O3 -fomit-frame-pointer::(unknown)::-lsocket -lresolv -lnsl:BN_LLONG ${x86_gcc_des} ${x86_gcc_opts}:${x86_elf_asm}:dlfcn:svr3-shared:-fPIC", # the SCO assembler doesn't seem to like our assembler files ...
-
 # Sinix/ReliantUNIX RM400
 # NOTE: The CDS++ Compiler up to V2.0Bsomething has the IRIX_CC_BUG optimizer problem. Better use -g  */
 "ReliantUNIX","cc:-KPIC -g -DTERMIOS -DB_ENDIAN::-Kthread:SNI:-lsocket -lnsl -lc -L/usr/ucblib -lucb:BN_LLONG DES_PTR DES_RISC2 DES_UNROLL BF_PTR::::::::::dlfcn:reliantunix-shared:::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
@@ -508,26 +525,24 @@ my %table=(
 "VC-MSDOS","cl:::(unknown):MSDOS::BN_LLONG MD2_CHAR DES_UNROLL DES_PTR RC4_INDEX SIXTEEN_BIT:::",
 
 # Borland C++ 4.5
-"BC-32","bcc32::::WIN32::BN_LLONG DES_PTR RC4_INDEX::::::::::win32",
+"BC-32","bcc32::::WIN32::BN_LLONG DES_PTR RC4_INDEX EXPORT_VAR_AS_FN::::::::::win32",
 "BC-16","bcc:::(unknown):WIN16::BN_LLONG DES_PTR RC4_INDEX SIXTEEN_BIT:::",
 
-# Mingw32
-# (Note: the real CFLAGS for Windows builds are defined by util/mk1mf.pl
-# and its library files in util/pl/*)
-"Mingw32", "gcc:-DL_ENDIAN -fomit-frame-pointer -O3 -m486 -Wall:::::BN_LLONG ${x86_gcc_des} ${x86_gcc_opts}::::::::::win32",
+# MinGW
+"mingw", "gcc:-DL_ENDIAN -fomit-frame-pointer -O3 -march=i486 -mno-cygwin -Wall -D_WIN32_WINNT=0x333:::MINGW32:-lwsock32 -lgdi32:BN_LLONG ${x86_gcc_des} ${x86_gcc_opts} EXPORT_VAR_AS_FN:${x86_out_asm}:win32:cygwin-shared:-D_WINDLL:-mno-cygwin:.dll.a",
 
 # UWIN 
 "UWIN", "cc:-DTERMIOS -DL_ENDIAN -O -Wall:::UWIN::BN_LLONG ${x86_gcc_des} ${x86_gcc_opts}::::::::::win32",
 
 # Cygwin
 "Cygwin-pre1.3", "gcc:-DTERMIOS -DL_ENDIAN -fomit-frame-pointer -O3 -m486 -Wall::(unknown):CYGWIN32::BN_LLONG ${x86_gcc_des} ${x86_gcc_opts}::::::::::win32",
-"Cygwin", "gcc:-DTERMIOS -DL_ENDIAN -fomit-frame-pointer -O3 -march=i486 -Wall:::CYGWIN32::BN_LLONG ${x86_gcc_des} ${x86_gcc_opts}:${x86_out_asm}:win32:cygwin-shared:::.dll",
+"Cygwin", "gcc:-DTERMIOS -DL_ENDIAN -fomit-frame-pointer -O3 -march=i486 -Wall:::CYGWIN32::BN_LLONG ${x86_gcc_des} ${x86_gcc_opts}:${x86_out_asm}:dlfcn:cygwin-shared:-D_WINDLL::.dll.a",
 
 # DJGPP
 "DJGPP", "gcc:-I/dev/env/WATT_ROOT/inc -DTERMIOS -DL_ENDIAN -fomit-frame-pointer -O2 -Wall:::MSDOS:-L/dev/env/WATT_ROOT/lib -lwatt:BN_LLONG ${x86_gcc_des} ${x86_gcc_opts}::::::::::",
 
 # Ultrix from Bernhard Simon <simon@zid.tuwien.ac.at>
-"ultrix-cc","cc:-std1 -O -Olimit 1000 -DL_ENDIAN::(unknown):::::::",
+"ultrix-cc","cc:-std1 -O -Olimit 2500 -DL_ENDIAN::(unknown):::::::",
 "ultrix-gcc","gcc:-O3 -DL_ENDIAN::(unknown):::::::",
 # K&R C is no longer supported; you need gcc on old Ultrix installations
 ##"ultrix","cc:-O2 -DNOPROTO -DNOCONST -DL_ENDIAN::(unknown):::::::",
@@ -547,7 +562,7 @@ my %table=(
 
 ##### MacOS X (a.k.a. Rhapsody or Darwin) setup
 "rhapsody-ppc-cc","cc:-O3 -DB_ENDIAN::(unknown):MACOSX_RHAPSODY::BN_LLONG RC4_CHAR RC4_CHUNK DES_UNROLL BF_PTR:::",
-"darwin-ppc-cc","cc:-O3 -fomit-frame-pointer -fno-common -DB_ENDIAN::-D_REENTRANT:MACOSX::BN_LLONG RC4_CHAR RC4_CHUNK DES_UNROLL BF_PTR:::::::::::darwin-shared:-fPIC::.\$(SHLIB_MAJOR).\$(SHLIB_MINOR).dylib",
+"darwin-ppc-cc","cc:-O3 -fomit-frame-pointer -DB_ENDIAN::-D_REENTRANT:MACOSX::BN_LLONG RC4_CHAR RC4_CHUNK DES_UNROLL BF_PTR:asm/osx_ppc32.o:::::::::dlfcn:darwin-shared:-fPIC -fno-common::.\$(SHLIB_MAJOR).\$(SHLIB_MINOR).dylib",
 "darwin-i386-cc","cc:-O3 -fomit-frame-pointer -fno-common -DB_ENDIAN::-D_REENTRANT:MACOSX::BN_LLONG RC4_CHAR RC4_CHUNK DES_UNROLL BF_PTR:::::::::::darwin-shared:-fPIC::.\$(SHLIB_MAJOR).\$(SHLIB_MINOR).dylib",
 
 ##### A/UX
@@ -566,6 +581,8 @@ my %table=(
 "vxworks-ppc405","ccppc:-g -msoft-float -mlongcall -DCPU=PPC405 -I\$(WIND_BASE)/target/h:::VXWORKS:-r:::::",
 "vxworks-ppc750","ccppc:-ansi -nostdinc -DPPC750 -D_REENTRANT -fvolatile -fno-builtin -fno-for-scope -fsigned-char -Wall -msoft-float -mlongcall -DCPU=PPC604 -I\$(WIND_BASE)/target/h \$(DEBUG_FLAG):::VXWORKS:-r:::::",
 "vxworks-ppc750-debug","ccppc:-ansi -nostdinc -DPPC750 -D_REENTRANT -fvolatile -fno-builtin -fno-for-scope -fsigned-char -Wall -msoft-float -mlongcall -DCPU=PPC604 -I\$(WIND_BASE)/target/h -DBN_DEBUG -DREF_CHECK -DCONF_DEBUG -DBN_CTX_DEBUG -DCRYPTO_MDEBUG -DPEDANTIC -DDEBUG_SAFESTACK -DDEBUG -g:::VXWORKS:-r:::::",
+"vxworks-ppc860","ccppc:-nostdinc -msoft-float -DCPU=PPC860 -DNO_STRINGS_H -I\$(WIND_BASE)/target/h:::VXWORKS:-r:::::",
+"vxworks-mipsle","ccmips:-B\$(WIND_BASE)/host/\$(WIND_HOST_TYPE)/lib/gcc-lib/ -DL_ENDIAN -EL -Wl,-EL -mips2 -mno-branch-likely -G 0 -fno-builtin -msoft-float -DCPU=MIPS32 -DMIPSEL -DNO_STRINGS_H -I\$(WIND_BASE)/target/h:::VXWORKS:-r::::::::::::::::ranlibmips:",
 
 ##### Compaq Non-Stop Kernel (Tandem)
 "tandem-c89","c89:-Ww -D__TANDEM -D_XOPEN_SOURCE -D_XOPEN_SOURCE_EXTENDED=1 -D_TANDEM_SOURCE -DB_ENDIAN::(unknown):::THIRTY_TWO_BIT:::",
@@ -612,7 +629,7 @@ my $threads=0;
 my $no_asm=0;
 my $no_dso=0;
 my @skip=();
-my $Makefile="Makefile.ssl";
+my $Makefile="Makefile";
 my $des_locl="crypto/des/des_locl.h";
 my $des	="crypto/des/des.h";
 my $bn	="crypto/bn/bn.h";
@@ -624,6 +641,7 @@ my $rc2	="crypto/rc2/rc2.h";
 my $bf	="crypto/bf/bf_locl.h";
 my $bn_asm	="bn_asm.o";
 my $des_enc="des_enc.o fcrypt_b.o";
+my $fips_des_enc="fips_des_enc.o";
 my $bf_enc	="bf_enc.o";
 my $cast_enc="c_enc.o";
 my $rc4_enc="rc4_enc.o";
@@ -634,6 +652,8 @@ my $rmd160_obj="";
 my $processor="";
 my $default_ranlib;
 my $perl;
+my $fips=0;
+my $debug=0;
 
 my $no_ssl2=0;
 my $no_ssl3=0;
@@ -643,10 +663,6 @@ my $no_sha=0;
 my $no_rsa=0;
 my $no_dh=0;
 
-$default_ranlib= &which("ranlib") or $default_ranlib="true";
-$perl=$ENV{'PERL'} or $perl=&which("perl5") or $perl=&which("perl")
-  or $perl="perl";
-
 &usage if ($#ARGV < 0);
 
 my $flags;
@@ -656,6 +672,7 @@ my $openssl_thread_defines;
 my $openssl_sys_defines="";
 my $openssl_other_defines;
 my $libs;
+my $libkrb5="";
 my $target;
 my $options;
 my $symlink;
@@ -696,6 +713,11 @@ PROCESS_ARGS:
 			$flags .= "-DOPENSSL_NO_ASM ";
 			$openssl_other_defines .= "#define OPENSSL_NO_ASM\n";
 			}
+		elsif (/^no-err$/)
+		 	{
+			$flags .= "-DOPENSSL_NO_ERR ";
+			$openssl_other_defines .= "#define OPENSSL_NO_ERR\n";
+			}
 		elsif (/^no-hw-(.+)$/)
 			{
 			my $hw=$1;
@@ -736,6 +758,8 @@ PROCESS_ARGS:
 			{ $no_ssl3 = 1; }
 		elsif (/^no-tls1?$/)
 			{ $no_tls1 = 1; }
+		elsif (/^no-fips$/)
+			{ $fips = 0; }
 		elsif (/^no-(.+)$/)
 			{
 			my $algo=$1;
@@ -801,6 +825,14 @@ PROCESS_ARGS:
 			}
 		elsif (/^386$/)
 			{ $processor=386; }
+		elsif (/^fips$/)
+			{
+			$fips=1;
+		        }
+		elsif (/^debug$/)
+			{
+			$debug=1;
+			}
 		elsif (/^rsaref$/)
 			{
 			# No RSAref support any more since it's not needed.
@@ -833,6 +865,14 @@ PROCESS_ARGS:
 				{
 				$withargs{"krb5-".$1}=$2;
 				}
+			elsif (/^--with-zlib-lib=(.*)$/)
+				{
+				$withargs{"zlib-lib"}=$1;
+				}
+			elsif (/^--with-zlib-include=(.*)$/)
+				{
+				$withargs{"zlib-include"}="-I$1";
+				}
 			else
 				{
 				print STDERR $usage;
@@ -846,7 +886,7 @@ PROCESS_ARGS:
 			}
 		else
 			{
-			die "target already defined - $target\n" if ($target ne "");
+			die "target already defined - $target (offending arg: $_)\n" if ($target ne "");
 			$target=$_;
 			}
 		unless ($_ eq $target) {
@@ -917,11 +957,15 @@ print "Configuring for $target\n";
 
 my $IsWindows=scalar grep /^$target$/,@WinTargets;
 
-$exe_ext=".exe" if ($target eq "Cygwin");
-$exe_ext=".exe" if ($target eq "DJGPP");
+$exe_ext=".exe" if ($target eq "Cygwin" || $target eq "DJGPP" || $target eq "mingw");
+$exe_ext=".pm" if ($target eq "vos-gcc" or $target eq "debug-vos-gcc" or $target eq "vos-vcc" or $target eq "debug-vos-vcc");
 $openssldir="/usr/local/ssl" if ($openssldir eq "" and $prefix eq "");
 $prefix=$openssldir if $prefix eq "";
 
+$default_ranlib= &which("ranlib") or $default_ranlib="true";
+$perl=$ENV{'PERL'} or $perl=&which("perl5") or $perl=&which("perl")
+  or $perl="perl";
+
 chop $openssldir if $openssldir =~ /\/$/;
 chop $prefix if $prefix =~ /\/$/;
 
@@ -932,6 +976,7 @@ $openssldir=$prefix . "/" . $openssldir if $openssldir !~ /(^\/|^[a-zA-Z]:[\\\/]
 print "IsWindows=$IsWindows\n";
 
 my @fields = split(/\s*:\s*/,$table{$target} . ":" x 30 , -1);
+for (@fields) { s/%([\dA-Fa-f]{2})/chr(hex($1))/eg; }
 my $cc = $fields[$idx_cc];
 my $cflags = $fields[$idx_cflags];
 my $unistd = $fields[$idx_unistd];
@@ -956,6 +1001,8 @@ my $shared_extension = $fields[$idx_shared_extension];
 my $ranlib = $fields[$idx_ranlib];
 my $arflags = $fields[$idx_arflags];
 
+my $no_shared_warn=0;
+
 $cflags="$flags$cflags" if ($flags ne "");
 
 # Kerberos settings.  The flavor must be provided from outside, either through
@@ -973,11 +1020,22 @@ else
 	my ($lresolv, $lpath, $lext);
 	if ($withargs{"krb5-flavor"} =~ /^[Hh]eimdal$/)
 		{
+		die "Sorry, Heimdal is currently not supported\n";
+		}
+	##### HACK to force use of Heimdal.
+	##### WARNING: Since we don't really have adequate support for Heimdal,
+	#####          using this will break the build.  You'll have to make
+	#####          changes to the source, and if you do, please send
+	#####          patches to openssl-dev@openssl.org
+	if ($withargs{"krb5-flavor"} =~ /^force-[Hh]eimdal$/)
+		{
+		warn "Heimdal isn't really supported.  Your build WILL break\n";
+		warn "If you fix the problems, please send a patch to openssl-dev\@openssl.org\n";
 		$withargs{"krb5-dir"} = "/usr/heimdal"
 			if $withargs{"krb5-dir"} eq "";
 		$withargs{"krb5-lib"} = "-L".$withargs{"krb5-dir"}.
 			"/lib -lgssapi -lkrb5 -lcom_err"
-			if $withargs{"krb5-lib"} eq "";
+			if $withargs{"krb5-lib"} eq "" && !$IsWindows;
 		$cflags="-DKRB5_HEIMDAL $cflags";
 		}
 	if ($withargs{"krb5-flavor"} =~ /^[Mm][Ii][Tt]/)
@@ -986,7 +1044,7 @@ else
 			if $withargs{"krb5-dir"} eq "";
 		$withargs{"krb5-lib"} = "-L".$withargs{"krb5-dir"}.
 			"/lib -lgssapi_krb5 -lkrb5 -lcom_err -lk5crypto"
-			if $withargs{"krb5-lib"} eq "";
+			if $withargs{"krb5-lib"} eq "" && !$IsWindows;
 		$cflags="-DKRB5_MIT $cflags";
 		$withargs{"krb5-flavor"} =~ s/^[Mm][Ii][Tt][._-]*//;
 		if ($withargs{"krb5-flavor"} =~ /^1[._-]*[01]/)
@@ -1005,7 +1063,7 @@ else
 			}
 		}
 	$withargs{"krb5-lib"} .= " -lresolv"
-		if ("$lresolv");
+		if ("$lresolv" ne "" && !$IsWindows);
 	$withargs{"krb5-include"} = "-I".$withargs{"krb5-dir"}."/include"
 		if $withargs{"krb5-include"} eq "" &&
 		   $withargs{"krb5-dir"} ne "";
@@ -1064,7 +1122,7 @@ else
 #		}
 	}	
 
-$lflags="$libs$lflags"if ($libs ne "");
+$lflags="$libs$lflags" if ($libs ne "");
 
 if ($no_asm)
 	{
@@ -1072,6 +1130,11 @@ if ($no_asm)
 	$sha1_obj=$md5_obj=$rmd160_obj="";
 	}
 
+if (!$no_shared)
+	{
+	$cast_obj="";	# CAST assembler is not PIC
+	}
+
 if ($threads)
 	{
 	$cflags=$thread_cflags;
@@ -1087,20 +1150,18 @@ if ($zlib)
 
 # You will find shlib_mark1 and shlib_mark2 explained in Makefile.org
 my $shared_mark = "";
-if ($shared_target ne "")
+if ($shared_target eq "")
+	{
+	$no_shared_warn = 1 if !$no_shared;
+	$no_shared = 1;
+	}
+if (!$no_shared)
 	{
 	if ($shared_cflag ne "")
 		{
-		$cflags = "$shared_cflag $cflags";
+		$cflags = "$shared_cflag -DOPENSSL_PIC $cflags";
+		$shared_ldflag = "$shared_ldflag $shared_cflag" if($fips);
 		}
-	if (!$no_shared)
-		{
-		#$shared_mark = "\$(SHARED_LIBS)";
-		}
-	}
-else
-	{
-	$no_shared = 1;
 	}
 
 if ($sys_id ne "")
@@ -1121,12 +1182,32 @@ if ($ranlib eq "")
 
 $bn_obj = $bn_asm unless $bn_obj ne "";
 
+my $fips_des_obj;
+my $fips_aes_obj;
+my $fips_sha1_obj;
+if ($fips)
+	{
+	if ($des_obj =~ /\-elf\.o$/)
+		{
+		$fips_des_obj='asm/fips-dx86-elf.o';
+		$openssl_other_defines.="#define OPENSSL_FIPS_DES_ASM\n";
+		$fips_aes_obj='asm/fips-ax86-elf.o';
+		$openssl_other_defines.="#define OPENSSL_FIPS_AES_ASM\n";
+		}
+	else	{
+		$fips_des_obj=$fips_des_enc;
+		$fips_aes_obj='fips_aes_core.o';
+		}
+	$fips_sha1_obj='asm/fips-sx86-elf.o' if ($sha1_obj =~ /\-elf\.o$/);
+	$des_obj=$sha1_obj="";
+	$openssl_other_defines.="#define OPENSSL_FIPS\n";
+	}
 $des_obj=$des_enc	unless ($des_obj =~ /\.o$/);
 $bf_obj=$bf_enc		unless ($bf_obj =~ /\.o$/);
 $cast_obj=$cast_enc	unless ($cast_obj =~ /\.o$/);
 $rc4_obj=$rc4_enc	unless ($rc4_obj =~ /\.o$/);
 $rc5_obj=$rc5_enc	unless ($rc5_obj =~ /\.o$/);
-if ($sha1_obj =~ /\.o$/)
+if ($sha1_obj =~ /\.o$/ || $fips_sha1_obj =~ /\.o$/)
 	{
 #	$sha1_obj=$sha1_enc;
 	$cflags.=" -DSHA1_ASM";
@@ -1142,6 +1223,12 @@ if ($rmd160_obj =~ /\.o$/)
 	$cflags.=" -DRMD160_ASM";
 	}
 
+if ($debug)
+	{
+	$cflags.=" -g";
+	$cflags=~s/-fomit-frame-pointer//;
+	}
+
 # "Stringify" the C flags string.  This permits it to be made part of a string
 # and works as well on command lines.
 $cflags =~ s/([\\\"])/\\\1/g;
@@ -1214,12 +1301,15 @@ while (<IN>)
 	s/^EXE_EXT=.*$/EXE_EXT= $exe_ext/;
 	s/^BN_ASM=.*$/BN_ASM= $bn_obj/;
 	s/^DES_ENC=.*$/DES_ENC= $des_obj/;
+	s/^FIPS_DES_ENC=.*$/FIPS_DES_ENC= $fips_des_obj/;
+	s/^FIPS_AES_ENC=.*$/FIPS_AES_ENC= $fips_aes_obj/;
 	s/^BF_ENC=.*$/BF_ENC= $bf_obj/;
 	s/^CAST_ENC=.*$/CAST_ENC= $cast_obj/;
 	s/^RC4_ENC=.*$/RC4_ENC= $rc4_obj/;
 	s/^RC5_ENC=.*$/RC5_ENC= $rc5_obj/;
 	s/^MD5_ASM_OBJ=.*$/MD5_ASM_OBJ= $md5_obj/;
 	s/^SHA1_ASM_OBJ=.*$/SHA1_ASM_OBJ= $sha1_obj/;
+	s/^FIPS_SHA1_ASM_OBJ=.*$/FIPS_SHA1_ASM_OBJ= $fips_sha1_obj/;
 	s/^RMD160_ASM_OBJ=.*$/RMD160_ASM_OBJ= $rmd160_obj/;
 	s/^PROCESSOR=.*/PROCESSOR= $processor/;
 	s/^RANLIB=.*/RANLIB= $ranlib/;
@@ -1227,6 +1317,8 @@ while (<IN>)
 	s/^PERL=.*/PERL= $perl/;
 	s/^KRB5_INCLUDES=.*/KRB5_INCLUDES=$withargs{"krb5-include"}/;
 	s/^LIBKRB5=.*/LIBKRB5=$withargs{"krb5-lib"}/;
+	s/^LIBZLIB=.*/LIBZLIB=$withargs{"zlib-lib"}/;
+	s/^ZLIB_INCLUDE=.*/ZLIB_INCLUDE=$withargs{"zlib-include"}/;
 	s/^SHLIB_TARGET=.*/SHLIB_TARGET=$shared_target/;
 	s/^SHLIB_MARK=.*/SHLIB_MARK=$shared_mark/;
 	s/^SHARED_LIBS=.*/SHARED_LIBS=\$(SHARED_CRYPTO) \$(SHARED_SSL)/ if (!$no_shared);
@@ -1274,8 +1366,6 @@ print "ARFLAGS       =$arflags\n";
 print "PERL          =$perl\n";
 print "KRB5_INCLUDES =",$withargs{"krb5-include"},"\n"
 	if $withargs{"krb5-include"} ne "";
-print "LIBKRB5       =",$withargs{"krb5-lib"},"\n"
-	if $withargs{"krb5-lib"} ne "";
 
 my $des_ptr=0;
 my $des_risc1=0;
@@ -1454,7 +1544,7 @@ if($IsWindows) {
 	printf OUT <<EOF;
 #ifndef MK1MF_BUILD
   /* auto-generated by Configure for crypto/cversion.c:
-   * for Unix builds, crypto/Makefile.ssl generates functional definitions;
+   * for Unix builds, crypto/Makefile generates functional definitions;
    * Windows builds (and other mk1mf builds) compile cversion.c with
    * -DMK1MF_BUILD and use definitions added to this file by util/mk1mf.pl. */
   #error "Windows builds (PLATFORM=$target) use mk1mf.pl-created Makefiles"
@@ -1462,7 +1552,7 @@ if($IsWindows) {
 EOF
 	close(OUT);
 } else {
-	my $make_command = "make -f Makefile.ssl PERL=\'$perl\'";
+	my $make_command = "make PERL=\'$perl\'";
 	my $make_targets = "";
 	$make_targets .= " links" if $symlink;
 	$make_targets .= " depend" if $depflags ne "" && $make_depend;
@@ -1471,12 +1561,10 @@ EOF
 		if $make_targets ne "";
 	if ( $perl =~ m@^/@) {
 	    &dofile("tools/c_rehash",$perl,'^#!/', '#!%s','^my \$dir;$', 'my $dir = "' . $openssldir . '";');
-	    &dofile("apps/der_chop",$perl,'^#!/', '#!%s');
 	    &dofile("apps/CA.pl",$perl,'^#!/', '#!%s');
 	} else {
 	    # No path for Perl known ...
 	    &dofile("tools/c_rehash",'/usr/local/bin/perl','^#!/', '#!%s','^my \$dir;$', 'my $dir = "' . $openssldir . '";');
-	    &dofile("apps/der_chop",'/usr/local/bin/perl','^#!/', '#!%s');
 	    &dofile("apps/CA.pl",'/usr/local/bin/perl','^#!/', '#!%s');
 	}
 	if ($depflags ne "" && !$make_depend) {
@@ -1502,6 +1590,16 @@ applications as the compiler options required on this system are not known.
 See file INSTALL for details if you need multi-threading.
 EOF
 
+print <<\EOF if ($no_shared_warn);
+
+You gave the option 'shared'.  Normally, that would give you shared libraries.
+Unfortunately, the OpenSSL configuration doesn't include shared library support
+for this platform yet, so it will pretend you gave the option 'no-shared'.  If
+you can inform the developpers (openssl-dev\@openssl.org) how to support shared
+libraries on this platform, they will at least look at it and try their best
+(but please first make sure you have tried with a current version of OpenSSL).
+EOF
+
 exit(0);
 
 sub usage
@@ -1543,10 +1641,10 @@ sub which
 	my $path;
 	foreach $path (split /:/, $ENV{PATH})
 		{
-		if (-f "$path/$name" and -x _)
+		if (-f "$path/$name$exe_ext" and -x _)
 			{
-			return "$path/$name" unless ($name eq "perl" and
-			 system("$path/$name -e " . '\'exit($]<5.0);\''));
+			return "$path/$name$exe_ext" unless ($name eq "perl" and
+			 system("$path/$name$exe_ext -e " . '\'exit($]<5.0);\''));
 			}
 		}
 	}
@@ -1574,12 +1672,13 @@ sub print_table_entry
 	{
 	my $target = shift;
 
+	my @fields = split(/\s*:\s*/,$table{$target} . ":" x 30 , -1);
+	for (@fields) { s/%([\dA-Fa-f]{2})/chr(hex($1))/eg; }
 	(my $cc,my $cflags,my $unistd,my $thread_cflag,my $sys_id,my $lflags,
 	my $bn_ops,my $bn_obj,my $des_obj,my $bf_obj,
 	my $md5_obj,my $sha1_obj,my $cast_obj,my $rc4_obj,my $rmd160_obj,
 	my $rc5_obj,my $dso_scheme,my $shared_target,my $shared_cflag,
-	my $shared_ldflag,my $shared_extension,my $ranlib,my $arflags)=
-	split(/\s*:\s*/,$table{$target} . ":" x 30 , -1);
+	my $shared_ldflag,my $shared_extension,my $ranlib,my $arflags)=@fields;
 			
 	print <<EOF
 
@@ -1622,6 +1721,7 @@ sub test_sanity
 	foreach $target (sort keys %table)
 		{
 		@fields = split(/\s*:\s*/,$table{$target} . ":" x 30 , -1);
+		for (@fields) { s/%([\dA-Fa-f]{2})/chr(hex($1))/eg; }
 
 		if ($fields[$idx_dso_scheme-1] =~ /^(dl|dlfcn|win32|vms)$/)
 			{

FAQ

@@ -44,12 +44,15 @@ OpenSSL  -  Frequently Asked Questions
 * What is special about OpenSSL on Redhat?
 * Why does the OpenSSL compilation fail on MacOS X?
 * Why does the OpenSSL test suite fail on MacOS X?
+* Why does the OpenSSL test suite fail in BN_sqr test [on a 64-bit platform]?
+* Why does OpenBSD-i386 build fail on des-586.s with "Unimplemented segment type"?
 
 [PROG] Questions about programming with OpenSSL
 
 * Is OpenSSL thread-safe?
 * I've compiled a program under Windows and it crashes: why?
 * How do I read or write a DER encoded buffer using the ASN1 functions?
+* OpenSSL uses DER but I need BER format: does OpenSSL support BER?
 * I've tried using <M_some_evil_pkcs12_macro> and I get errors why?
 * I've called <some function> and it fails, why?
 * I just get a load of numbers for the error output, what do they mean?
@@ -58,6 +61,7 @@ OpenSSL  -  Frequently Asked Questions
 * Can I use OpenSSL's SSL library with non-blocking I/O?
 * Why doesn't my server application receive a client certificate?
 * Why does compilation fail due to an undefined symbol NID_uniqueIdentifier?
+* I think I've detected a memory leak, is this a bug?
 
 ===============================================================================
 
@@ -66,7 +70,7 @@ OpenSSL  -  Frequently Asked Questions
 * Which is the current version of OpenSSL?
 
 The current version is available from <URL: http://www.openssl.org>.
-OpenSSL 0.9.6g was released on August 9, 2002.
+OpenSSL 0.9.7i was released on October 14, 2005.
 
 In addition to the current stable release, you can also access daily
 snapshots of the OpenSSL development version at <URL:
@@ -114,11 +118,14 @@ OpenSSL.  Information on the OpenSSL mailing lists is available from
 
 * Where can I get a compiled version of OpenSSL?
 
+You can finder pointers to binary distributions in
+http://www.openssl.org/related/binaries.html .
+
 Some applications that use OpenSSL are distributed in binary form.
 When using such an application, you don't need to install OpenSSL
 yourself; the application will include the required parts (e.g. DLLs).
 
-If you want to install OpenSSL on a Windows system and you don't have
+If you want to build OpenSSL on a Windows system and you don't have
 a C compiler, read the "Mingw32" section of INSTALL.W32 for information
 on how to obtain and install the free GNU C compiler.
 
@@ -134,8 +141,8 @@ less Unix-centric, it might have been used much earlier.
 
 With version 0.9.6 OpenSSL was extended to interface to external crypto
 hardware. This was realized in a special release '0.9.6-engine'. With
-version 0.9.7 (not yet released) the changes were merged into the main
-development line, so that the special release is no longer necessary.
+version 0.9.7 the changes were merged into the main development line,
+so that the special release is no longer necessary.
 
 * How do I check the authenticity of the OpenSSL distribution?
 
@@ -187,18 +194,30 @@ for permission to use their software with OpenSSL.
 
 Cryptographic software needs a source of unpredictable data to work
 correctly.  Many open source operating systems provide a "randomness
-device" that serves this purpose.  On other systems, applications have
-to call the RAND_add() or RAND_seed() function with appropriate data
-before generating keys or performing public key encryption.
-(These functions initialize the pseudo-random number generator, PRNG.)
+device" (/dev/urandom or /dev/random) that serves this purpose.
+All OpenSSL versions try to use /dev/urandom by default; starting with
+version 0.9.7, OpenSSL also tries /dev/random if /dev/urandom is not
+available.
 
-Some broken applications do not do this.  As of version 0.9.5, the
-OpenSSL functions that need randomness report an error if the random
-number generator has not been seeded with at least 128 bits of
-randomness.  If this error occurs, please contact the author of the
-application you are using.  It is likely that it never worked
-correctly.  OpenSSL 0.9.5 and later make the error visible by refusing
-to perform potentially insecure encryption.
+On other systems, applications have to call the RAND_add() or
+RAND_seed() function with appropriate data before generating keys or
+performing public key encryption. (These functions initialize the
+pseudo-random number generator, PRNG.)  Some broken applications do
+not do this.  As of version 0.9.5, the OpenSSL functions that need
+randomness report an error if the random number generator has not been
+seeded with at least 128 bits of randomness.  If this error occurs and
+is not discussed in the documentation of the application you are
+using, please contact the author of that application; it is likely
+that it never worked correctly.  OpenSSL 0.9.5 and later make the
+error visible by refusing to perform potentially insecure encryption.
+
+If you are using Solaris 8, you can add /dev/urandom and /dev/random
+devices by installing patch 112438 (Sparc) or 112439 (x86), which are
+available via the Patchfinder at <URL: http://sunsolve.sun.com>
+(Solaris 9 includes these devices by default). For /dev/random support
+for earlier Solaris versions, see Sun's statement at
+<URL: http://sunsolve.sun.com/pub-cgi/retrieve.pl?doc=fsrdb/27606&zone_32=SUNWski>
+(the SUNWski package is available in patch 105710).
 
 On systems without /dev/urandom and /dev/random, it is a good idea to
 use the Entropy Gathering Demon (EGD); see the RAND_egd() manpage for
@@ -231,18 +250,6 @@ OpenSSL command line tools. Applications using the OpenSSL library
 provide their own configuration options to specify the entropy source,
 please check out the documentation coming the with application.
 
-For Solaris 2.6, Tim Nibbe <tnibbe@sprint.net> and others have suggested
-installing the SUNski package from Sun patch 105710-01 (Sparc) which
-adds a /dev/random device and make sure it gets used, usually through
-$RANDFILE.  There are probably similar patches for the other Solaris
-versions.  An official statement from Sun with respect to /dev/random
-support can be found at
-  http://sunsolve.sun.com/pub-cgi/retrieve.pl?doc=fsrdb/27606&zone_32=SUNWski
-However, be warned that /dev/random is usually a blocking device, which
-may have some effects on OpenSSL.
-A third party /dev/random solution for Solaris is available at
-  http://www.cosy.sbg.ac.at/~andi/
-
 
 * Why do I get an "unable to write 'random state'" error message?
 
@@ -455,7 +462,7 @@ get the best result from OpenSSL.  A bit more complicated solution is the
 following:
 
 ----- snip:start -----
-  make DIRS=crypto SDIRS=sha "`grep '^CFLAG=' Makefile.ssl | \
+  make DIRS=crypto SDIRS=sha "`grep '^CFLAG=' Makefile | \
        sed -e 's/ -O[0-9] / -O0 /'`"
   rm `ls crypto/*.o crypto/sha/*.o | grep -v 'sha_dgst\.o'`
   make
@@ -465,6 +472,10 @@ This will only compile sha_dgst.c with -O0, the rest with the optimization
 level chosen by the configuration process.  When the above is done, do the
 test and installation and you're set.
 
+3. Reconfigure the toolkit with no-sha0 option to leave out SHA0. It
+should not be used and is not used in SSL/TLS nor any other recognized
+protocol in either case.
+
 
 * Why does the OpenSSL compilation fail with "ar: command not found"?
 
@@ -488,10 +499,13 @@ and then redo the compilation.  What you should really do is make sure
 Sometimes, you may get reports from VC++ command line (cl) that it
 can't find standard include files like stdio.h and other weirdnesses.
 One possible cause is that the environment isn't correctly set up.
-To solve that problem, one should run VCVARS32.BAT which is found in
-the 'bin' subdirectory of the VC++ installation directory (somewhere
-under 'Program Files').  This needs to be done prior to running NMAKE,
-and the changes are only valid for the current DOS session.
+To solve that problem for VC++ versions up to 6, one should run
+VCVARS32.BAT which is found in the 'bin' subdirectory of the VC++
+installation directory (somewhere under 'Program Files').  For VC++
+version 7 (and up?), which is also called VS.NET, the file is called
+VSVARS32.BAT instead.
+This needs to be done prior to running NMAKE, and the changes are only
+valid for the current DOS session.
 
 
 * What is special about OpenSSL on Redhat?
@@ -552,6 +566,37 @@ libraries you just built.
 Look in the file PROBLEMS for a more detailed explanation and for possible
 solutions.
 
+* Why does the OpenSSL test suite fail in BN_sqr test [on a 64-bit platform]?
+
+Failure in BN_sqr test is most likely caused by a failure to configure the
+toolkit for current platform or lack of support for the platform in question.
+Run './config -t' and './apps/openssl version -p'. Do these platform
+identifiers match? If they don't, then you most likely failed to run
+./config and you're hereby advised to do so before filing a bug report.
+If ./config itself fails to run, then it's most likely problem with your
+local environment and you should turn to your system administrator (or
+similar). If identifiers match (and/or no alternative identifier is
+suggested by ./config script), then the platform is unsupported. There might
+or might not be a workaround. Most notably on SPARC64 platforms with GNU
+C compiler you should be able to produce a working build by running
+'./config -m32'. I understand that -m32 might not be what you want/need,
+but the build should be operational. For further details turn to
+<openssl-dev@openssl.org>.
+
+* Why does OpenBSD-i386 build fail on des-586.s with "Unimplemented segment type"?
+
+As of 0.9.7 assembler routines were overhauled for position independence
+of the machine code, which is essential for shared library support. For
+some reason OpenBSD is equipped with an out-of-date GNU assembler which
+finds the new code offensive. To work around the problem, configure with
+no-asm (and sacrifice a great deal of performance) or patch your assembler
+according to <URL: http://www.openssl.org/~appro/gas-1.92.3.OpenBSD.patch>.
+For your convenience a pre-compiled replacement binary is provided at
+<URL: http://www.openssl.org/~appro/gas-1.92.3.static.aout.bin>.
+Reportedly elder *BSD a.out platforms also suffer from this problem and
+remedy should be same. Provided binary is statically linked and should be
+working across wider range of *BSD branches, not just OpenBSD.
+
 [PROG] ========================================================================
 
 * Is OpenSSL thread-safe?
@@ -644,6 +689,20 @@ and attempts to free the buffer will have unpredictable results
 because it no longer points to the same address.
 
 
+* OpenSSL uses DER but I need BER format: does OpenSSL support BER?
+
+The short answer is yes, because DER is a special case of BER and OpenSSL
+ASN1 decoders can process BER.
+
+The longer answer is that ASN1 structures can be encoded in a number of
+different ways. One set of ways is the Basic Encoding Rules (BER) with various
+permissible encodings. A restriction of BER is the Distinguished Encoding
+Rules (DER): these uniquely specify how a given structure is encoded.
+
+Therefore, because DER is a special case of BER, DER is an acceptable encoding
+for BER.
+
+
 * I've tried using <M_some_evil_pkcs12_macro> and I get errors why?
 
 This usually happens when you try compiling something using the PKCS#12
@@ -696,6 +755,7 @@ The general answer is to check the config.log file generated when running
 the OpenSSH configure script. It should contain the detailed information
 on why the OpenSSL library was not detected or considered incompatible.
 
+
 * Can I use OpenSSL's SSL library with non-blocking I/O?
 
 Yes; make sure to read the SSL_get_error(3) manual page!
@@ -725,5 +785,28 @@ The correct name according to RFC2256 (LDAP) is x500UniqueIdentifier.
 Change your code to use the new name when compiling against OpenSSL 0.9.7.
 
 
+* I think I've detected a memory leak, is this a bug?
+
+In most cases the cause of an apparent memory leak is an OpenSSL internal table
+that is allocated when an application starts up. Since such tables do not grow
+in size over time they are harmless.
+
+These internal tables can be freed up when an application closes using various
+functions.  Currently these include following:
+
+Thread-local cleanup functions:
+
+  ERR_remove_state()
+
+Application-global cleanup functions that are aware of usage (and therefore
+thread-safe):
+
+  ENGINE_cleanup() and CONF_modules_unload()
+
+"Brutal" (thread-unsafe) Application-global cleanup functions:
+
+  ERR_free_strings(), EVP_cleanup() and CRYPTO_cleanup_all_ex_data().
+
+
 ===============================================================================
 

INSTALL

@@ -123,7 +123,7 @@
      generic configurations "cc" or "gcc" should usually work on 32 bit
      systems.
 
-     Configure creates the file Makefile.ssl from Makefile.org and
+     Configure creates the file Makefile from Makefile.org and
      defines various macros in crypto/opensslconf.h (generated from
      crypto/opensslconf.h.in).
 
@@ -140,8 +140,8 @@
      standard headers).  If it is a problem with OpenSSL itself, please
      report the problem to <openssl-bugs@openssl.org> (note that your
      message will be recorded in the request tracker publicly readable
-     via http://www.openssl.org/rt2.html and will be forwarded to a public
-     mailing list). Include the output of "make report" in your message.
+     via http://www.openssl.org/support/rt2.html and will be forwarded to a
+     public mailing list). Include the output of "make report" in your message.
      Please check out the request tracker. Maybe the bug was already
      reported or has already been fixed.
 
@@ -158,11 +158,11 @@
      If a test fails, look at the output.  There may be reasons for
      the failure that isn't a problem in OpenSSL itself (like a missing
      or malfunctioning bc).  If it is a problem with OpenSSL itself,
-     try removing any compiler optimization flags from the CFLAGS line
-     in Makefile.ssl and run "make clean; make". Please send a bug
+     try removing any compiler optimization flags from the CFLAG line
+     in Makefile and run "make clean; make". Please send a bug
      report to <openssl-bugs@openssl.org>, including the output of
      "make report" in order to be added to the request tracker at
-     http://www.openssl.org/rt2.html.
+     http://www.openssl.org/support/rt2.html.
 
   4. If everything tests ok, install OpenSSL with
 
@@ -308,3 +308,25 @@
  to install additional support software to obtain random seed.
  Please check out the manual pages for RAND_add(), RAND_bytes(), RAND_egd(),
  and the FAQ for more information.
+
+ Note on support for multiple builds
+ -----------------------------------
+
+ OpenSSL is usually built in it's source tree.  Unfortunately, this doesn't
+ support building for multiple platforms from the same source tree very well.
+ It is however possible to build in a separate tree through the use of lots
+ of symbolic links, which should be prepared like this:
+
+	mkdir -p objtree/"`uname -s`-`uname -r`-`uname -m`"
+	cd objtree/"`uname -s`-`uname -r`-`uname -m`"
+	(cd $OPENSSL_SOURCE; find . -type f) | while read F; do
+		mkdir -p `dirname $F`
+		rm -f $F; ln -s $OPENSSL_SOURCE/$F $F
+		echo $F '->' $OPENSSL_SOURCE/$F
+	done
+	make -f Makefile.org clean
+
+ OPENSSL_SOURCE is an environment variable that contains the absolute (this
+ is important!) path to the OpenSSL source tree.
+
+ Also, operations like 'make update' should still be made in the source tree.

INSTALL.DJGPP

@@ -3,30 +3,45 @@
  INSTALLATION ON THE DOS PLATFORM WITH DJGPP
  -------------------------------------------
 
- Openssl has been ported to DOS, but only with long filename support. If
- you wish to compile on native DOS with 8+3 filenames, you will have to
- tweak the installation yourself, including renaming files with illegal
- or duplicate names.
+ OpenSSL has been ported to DJGPP, a Unix look-alike 32-bit run-time
+ environment for 16-bit DOS, but only with long filename support.
+ If you wish to compile on native DOS with 8+3 filenames, you will
+ have to tweak the installation yourself, including renaming files
+ with illegal or duplicate names.
 
  You should have a full DJGPP environment installed, including the
  latest versions of DJGPP, GCC, BINUTILS, BASH, etc. This package
  requires that PERL and BC also be installed.
 
- All of these can be obtained from the usual DJGPP mirror sites, such as
- "ftp://ftp.simtel.net/pub/simtelnet/gnu/djgpp". You also need to have
+ All of these can be obtained from the usual DJGPP mirror sites or
+ directly at "http://www.delorie.com/pub/djgpp". For help on which
+ files to download, see the DJGPP "ZIP PICKER" page at
+ "http://www.delorie.com/djgpp/zip-picker.html". You also need to have
  the WATT-32 networking package installed before you try to compile
- openssl. This can be obtained from "http://www.bgnett.no/~giva/". The
- Makefile assumes that the WATT-32 code is in directory "watt32" under
- /dev/env/DJDIR.
+ OpenSSL. This can be obtained from "http://www.bgnett.no/~giva/".
+ The Makefile assumes that the WATT-32 code is in the directory
+ specified by the environment variable WATT_ROOT. If you have watt-32
+ in directory "watt32" under your main DJGPP directory, specify
+ WATT_ROOT="/dev/env/DJDIR/watt32".
 
- To compile openssl, start your BASH shell. Then configure for DOS by
- running "./Configure" with appropriate arguments. The basic syntax for
- DOS is:
- ./Configure no-threads --prefix=/dev/env/DJDIR DJGPP
+ To compile OpenSSL, start your BASH shell, then configure for DJGPP by
+ running "./Configure" with appropriate arguments:
+
+	./Configure no-threads --prefix=/dev/env/DJDIR DJGPP
  
- You may run out of DPMI selectors when running in a DOS box under
- Windows. If so, just close the BASH shell, go back to Windows, and
- restart BASH. Then run "make" again.
+ And finally fire up "make". You may run out of DPMI selectors when
+ running in a DOS box under Windows. If so, just close the BASH
+ shell, go back to Windows, and restart BASH. Then run "make" again.
 
- Building openssl under DJGPP has been tested with DJGPP 2.03,
- GCC 2.952, GCC 2.953, perl 5.005_02 and perl 5.006_01.
+ RUN-TIME CAVEAT LECTOR
+ --------------
+
+ Quoting FAQ:
+
+  "Cryptographic software needs a source of unpredictable data to work
+   correctly.  Many open source operating systems provide a "randomness
+   device" (/dev/urandom or /dev/random) that serves this purpose."
+
+ As of version 0.9.7f DJGPP port checks upon /dev/urandom$ for a 3rd
+ party "randomness" DOS driver. One such driver, NOISE.SYS, can be
+ obtained from "http://www.rahul.net/dkaufman/index.html".

INSTALL.W32

@@ -10,33 +10,12 @@
 
  You need Perl for Win32.  Unless you will build on Cygwin, you will need
  ActiveState Perl, available from http://www.activestate.com/ActivePerl.
- For Cygwin users, there's more info in the Cygwin section.
 
  and one of the following C compilers:
 
   * Visual C++
   * Borland C
-  * GNU C (Mingw32 or Cygwin)
-
- If you want to compile in the assembly language routines with Visual C++ then
- you will need an assembler. This is worth doing because it will result in
- faster code: for example it will typically result in a 2 times speedup in the
- RSA routines. Currently the following assemblers are supported:
-
-  * Microsoft MASM (aka "ml")
-  * Free Netwide Assembler NASM.
-
- MASM was at one point distributed with VC++. It is now distributed with some
- Microsoft DDKs, for example the Windows NT 4.0 DDK and the Windows 98 DDK. If
- you do not have either of these DDKs then you can just download the binaries
- for the Windows 98 DDK and extract and rename the two files XXXXXml.exe and
- XXXXXml.err, to ml.exe and ml.err and install somewhere on your PATH. Both
- DDKs can be downloaded from the Microsoft developers site www.msdn.com.
-
- NASM is freely available. Version 0.98 was used during testing: other versions
- may also work. It is available from many places, see for example:
- http://www.kernel.org/pub/software/devel/nasm/binaries/win32/
- The NASM binary nasmw.exe needs to be installed anywhere on your PATH.
+  * GNU C (Cygwin or MinGW)
 
  If you are compiling from a tarball or a CVS snapshot then the Win32 files
  may well be not up to date. This may mean that some "tweaking" is required to
@@ -46,12 +25,34 @@
  Visual C++
  ----------
 
- Firstly you should run Configure:
+ If you want to compile in the assembly language routines with Visual C++ then
+ you will need an assembler. This is worth doing because it will result in
+ faster code: for example it will typically result in a 2 times speedup in the
+ RSA routines. Currently the following assemblers are supported:
+
+  * Microsoft MASM (aka "ml")
+  * Free Netwide Assembler NASM.
+
+ MASM is distributed with most versions of VC++. For the versions where it is
+ not included in VC++, it is also distributed with some Microsoft DDKs, for
+ example the Windows NT 4.0 DDK and the Windows 98 DDK. If you do not have
+ either of these DDKs then you can just download the binaries for the Windows
+ 98 DDK and extract and rename the two files XXXXXml.exe and XXXXXml.err, to
+ ml.exe and ml.err and install somewhere on your PATH. Both DDKs can be
+ downloaded from the Microsoft developers site www.msdn.com.
+
+ NASM is freely available. Version 0.98 was used during testing: other versions
+ may also work. It is available from many places, see for example:
+ http://www.kernel.org/pub/software/devel/nasm/binaries/win32/
+ The NASM binary nasmw.exe needs to be installed anywhere on your PATH.
+
+ Firstly you should run Configure (to build a FIPS-certified variant of
+ OpenSSL, add the option "fips"):
 
  > perl Configure VC-WIN32
 
  Next you need to build the Makefiles and optionally the assembly language
- files:
+ files (to build a FIPS-certified variant of OpenSSL, add the argument "fips"):
 
  - If you are using MASM then run:
 
@@ -100,10 +101,12 @@
  Borland C++ builder 5
  ---------------------
 
- * Configure for building with Borland Builder:
+ * Configure for building with Borland Builder (to build a FIPS-certified
+   variant of OpenSSL, add the option "fips"):
    > perl Configure BC-32
 
- * Create the appropriate makefile
+ * Create the appropriate makefile (to build a FIPS-certified variant of
+   OpenSSL, add the argument "fips")
    > ms\do_nasm
 
  * Build
@@ -119,62 +122,35 @@
  * Run make:
    > make -f bcb.mak
 
- GNU C (Mingw32)
- ---------------
-
- To build OpenSSL, you need the Mingw32 package and GNU make.
-
- * Compiler installation:
-
-   Mingw32 is available from <ftp://ftp.xraylith.wisc.edu/pub/khan/
-   gnu-win32/mingw32/gcc-2.95.2/gcc-2.95.2-msvcrt.exe>. Extract it
-   to a directory such as C:\gcc-2.95.2 and add c:\gcc-2.95.2\bin to
-   the PATH environment variable in "System Properties"; or edit and
-   run C:\gcc-2.95.2\mingw32.bat to set the PATH.
-
- * Compile OpenSSL:
-
-   > ms\mingw32
-
-   This will create the library and binaries in out. In case any problems
-   occur, try
-   > ms\mingw32 no-asm
-   instead.
-
-   libcrypto.a and libssl.a are the static libraries. To use the DLLs,
-   link with libeay32.a and libssl32.a instead.
-
-   See troubleshooting if you get error messages about functions not having
-   a number assigned.
-
- * You can now try the tests:
-
-   > cd out
-   > ..\ms\test
-
  GNU C (Cygwin)
  --------------
 
  Cygwin provides a bash shell and GNU tools environment running
  on NT 4.0, Windows 9x, Windows ME, Windows 2000, and Windows XP.
  Consequently, a make of OpenSSL with Cygwin is closer to a GNU
- bash environment such as Linux than to other W32 makes which are
- based on a single makefile approach. Cygwin implements Posix/Unix
- calls through cygwin1.dll, and is contrasted to Mingw32 which links
- dynamically to msvcrt.dll or crtdll.dll.
+ bash environment such as Linux than to other the other Win32
+ makes.
+
+ Cygwin implements a Posix/Unix runtime system (cygwin1.dll).
+ It is also possible to create Win32 binaries that only use the
+ Microsoft C runtime system (msvcrt.dll or crtdll.dll) using
+ MinGW. MinGW can be used in the Cygwin development environment
+ or in a standalone setup as described in the following section.
 
  To build OpenSSL using Cygwin:
 
  * Install Cygwin (see http://cygwin.com/)
 
- * Install Perl and ensure it is in the path (recent Cygwin perl 
-   (version 5.6.1-2 of the latter has been reported to work) or
-   ActivePerl)
+ * Install Perl and ensure it is in the path. Both Cygwin perl
+   (5.6.1-2 or newer) and ActivePerl work.
 
  * Run the Cygwin bash shell
 
  * $ tar zxvf openssl-x.x.x.tar.gz
    $ cd openssl-x.x.x
+
+   To build the Cygwin version of OpenSSL:
+
    $ ./config
    [...]
    $ make
@@ -182,7 +158,16 @@
    $ make test
    $ make install
 
- This will create a default install in /usr/local/ssl.
+   This will create a default install in /usr/local/ssl.
+
+   To build the MinGW version (native Windows) in Cygwin:
+
+   $ ./Configure mingw
+   [...]
+   $ make
+   [...]
+   $ make test
+   $ make install
 
  Cygwin Notes:
 
@@ -195,6 +180,37 @@
  non-fatal error in "make test" but is otherwise harmless.  If
  desired and needed, GNU bc can be built with Cygwin without change.
 
+ GNU C (MinGW)
+ -------------
+
+ * Compiler installation:
+
+   MinGW is available from http://www.mingw.org. Run the installer and
+   set the MinGW bin directory to the PATH in "System Properties" or
+   autoexec.bat.
+
+ * Compile OpenSSL:
+
+   > ms\mingw32
+
+   This will create the library and binaries in out. In case any problems
+   occur, try
+   > ms\mingw32 no-asm
+   instead.
+   If you want to build a FIPS-certified variant of OpenSSL, add the argument
+   "fips"
+
+   libcrypto.a and libssl.a are the static libraries. To use the DLLs,
+   link with libeay32.a and libssl32.a instead.
+
+   See troubleshooting if you get error messages about functions not having
+   a number assigned.
+
+ * You can now try the tests:
+
+   > cd out
+   > ..\ms\test
+
 
  Installation
  ------------
@@ -214,7 +230,7 @@
 	$ md c:\openssl\lib
 	$ md c:\openssl\include
 	$ md c:\openssl\include\openssl
-	$ copy /b inc32\*               c:\openssl\include\openssl
+	$ copy /b inc32\openssl\*       c:\openssl\include\openssl
 	$ copy /b out32dll\ssleay32.lib c:\openssl\lib
 	$ copy /b out32dll\libeay32.lib c:\openssl\lib
 	$ copy /b out32dll\ssleay32.dll c:\openssl\bin

INSTALL.WCE

@@ -11,6 +11,9 @@
  You also need Perl for Win32.  You will need ActiveState Perl, available
  from http://www.activestate.com/ActivePerl.
 
+ Windows CE support in OpenSSL relies on wcecompat.  All Windows CE specific
+ issues should be directed to www.essemer.com.au.
+
  The C Runtime Library implementation for Windows CE that is included with
  Microsoft eMbedded Visual C++ 3.0 is incomplete and in some places
  incorrect.  wcecompat plugs the holes and tries to bring the Windows CE

LICENSE

@@ -12,7 +12,7 @@
   ---------------
 
 /* ====================================================================
- * Copyright (c) 1998-2002 The OpenSSL Project.  All rights reserved.
+ * Copyright (c) 1998-2005 The OpenSSL Project.  All rights reserved.
  *
  * Redistribution and use in source and binary forms, with or without
  * modification, are permitted provided that the following conditions

MacOS/GetHTTPS.src/CPStringUtils.cpp

@@ -2750,4 +2750,4 @@ void SkipWhiteSpace(char **ioSrcCharPtr,const Boolean inStopAtEOL)
 			}
 		}
 	}
-}
+}

MacOS/GetHTTPS.src/ErrorHandling.cpp

@@ -167,4 +167,4 @@ void ThrowErrorMessageException(void)
 	ThrowDescriptiveException(gErrorMessage);
 }
 
-#endif
+#endif

Makefile.org

@@ -15,6 +15,11 @@ OPTIONS=
 CONFIGURE_ARGS=
 SHLIB_TARGET=
 
+# HERE indicates where this Makefile lives.  This can be used to indicate
+# where sub-Makefiles are expected to be.  Currently has very limited usage,
+# and should probably not be bothered with at all.
+HERE=.
+
 # INSTALL_PREFIX is for package builders so that they can configure
 # for, say, /usr/ and yet have everything installed to /tmp/somedir/usr/.
 # Normally it is left empty.
@@ -67,6 +72,14 @@ TAR= tar
 TARFLAGS= --no-recursion
 MAKEDEPPROG=makedepend
 
+# We let the C compiler driver to take care of .s files. This is done in
+# order to be excused from maintaining a separate set of architecture
+# dependent assembler flags. E.g. if you throw -mcpu=ultrasparc at SPARC
+# gcc, then the driver will automatically translate it to -xarch=v8plus
+# and pass it down to assembler.
+AS=$(CC) -c
+ASFLAG=$(CFLAG)
+
 # Set BN_ASM to bn_asm.o if you want to use the C version
 BN_ASM= bn_asm.o
 #BN_ASM= bn_asm.o
@@ -88,6 +101,8 @@ PROCESSOR=
 
 # Set DES_ENC to des_enc.o if you want to use the C version
 #There are 4 x86 assember options.
+FIPS_DES_ENC= des_enc.o fcrypt_b.o
+FIPS_AES_ENC= fips_aes_core.o
 DES_ENC= asm/dx86-out.o asm/yx86-out.o
 #DES_ENC= des_enc.o fcrypt_b.o          # C
 #DES_ENC= asm/dx86-elf.o asm/yx86-elf.o # elf
@@ -140,6 +155,7 @@ MD5_ASM_OBJ= asm/mx86-out.o
 
 # Also need SHA1_ASM defined
 SHA1_ASM_OBJ= asm/sx86-out.o
+FIPS_SHA1_ASM_OBJ= asm/sx86-out.o
 #SHA1_ASM_OBJ= asm/sx86-elf.o       # elf
 #SHA1_ASM_OBJ= asm/sx86-sol.o       # solaris
 #SHA1_ASM_OBJ= asm/sx86-out.o       # a.out, FreeBSD
@@ -156,31 +172,37 @@ RMD160_ASM_OBJ= asm/rm86-out.o
 KRB5_INCLUDES=
 LIBKRB5=
 
+# Zlib stuff
+ZLIB_INCLUDE=
+LIBZLIB=
+
 # When we're prepared to use shared libraries in the programs we link here
 # we might set SHLIB_MARK to '$(SHARED_LIBS)'.
 SHLIB_MARK=
 
-DIRS=   crypto ssl $(SHLIB_MARK) apps test tools
+DIRS=   crypto fips-1.0 ssl $(SHLIB_MARK) apps test tools
 SHLIBDIRS= crypto ssl
 
 # dirs in crypto to build
-SDIRS=  \
+SDIRS=  objects \
 	md2 md4 md5 sha mdc2 hmac ripemd \
 	des rc2 rc4 rc5 idea bf cast \
 	bn ec rsa dsa dh dso engine aes \
-	buffer bio stack lhash rand err objects \
+	buffer bio stack lhash rand err \
 	evp asn1 pem x509 x509v3 conf txt_db pkcs7 pkcs12 comp ocsp ui krb5
 
+FDIRS=	sha rand des aes dsa rsa dh hmac
+
 # tests to perform.  "alltests" is a special word indicating that all tests
 # should be performed.
 TESTS = alltests
 
-MAKEFILE= Makefile.ssl
-MAKE=     make -f Makefile.ssl
+MAKEFILE= Makefile
 
 MANDIR=$(OPENSSLDIR)/man
 MAN1=1
 MAN3=3
+MANSUFFIX=
 SHELL=/bin/sh
 
 TOP=    .
@@ -205,14 +227,25 @@ HEADER=         e_os.h
 # When we're prepared to use shared libraries in the programs we link here
 # we might remove 'clean-shared' from the targets to perform at this stage
 
-all: Makefile.ssl sub_all openssl.pc
+all: Makefile sub_all openssl.pc
 
 sub_all:
 	@for i in $(DIRS); \
 	do \
 	if [ -d "$$i" ]; then \
 		(cd $$i && echo "making all in $$i..." && \
-		$(MAKE) CC='${CC}' PLATFORM='${PLATFORM}' CFLAG='${CFLAG}' SDIRS='$(SDIRS)' INSTALLTOP='${INSTALLTOP}' PEX_LIBS='${PEX_LIBS}' EX_LIBS='${EX_LIBS}' BN_ASM='${BN_ASM}' DES_ENC='${DES_ENC}' BF_ENC='${BF_ENC}' CAST_ENC='${CAST_ENC}' RC4_ENC='${RC4_ENC}' RC5_ENC='${RC5_ENC}' SHA1_ASM_OBJ='${SHA1_ASM_OBJ}' MD5_ASM_OBJ='${MD5_ASM_OBJ}' RMD160_ASM_OBJ='${RMD160_ASM_OBJ}' AR='${AR}' PROCESSOR='${PROCESSOR}' PERL='${PERL}' RANLIB='${RANLIB}' KRB5_INCLUDES='${KRB5_INCLUDES}' LIBKRB5='${LIBKRB5}' EXE_EXT='${EXE_EXT}' SHARED_LIBS='${SHARED_LIBS}' SHLIB_EXT='${SHLIB_EXT}' SHLIB_TARGET='${SHLIB_TARGET}' all ) || exit 1; \
+		$(MAKE) CC='${CC}' PLATFORM='${PLATFORM}' CFLAG='${CFLAG}' AS='${AS}' ASFLAG='${ASFLAG}' SDIRS='$(SDIRS)' FDIRS='$(FDIRS)' INSTALLTOP='${INSTALLTOP}' PEX_LIBS='${PEX_LIBS}' EX_LIBS='${EX_LIBS}' BN_ASM='${BN_ASM}' DES_ENC='${DES_ENC}' FIPS_DES_ENC='${FIPS_DES_ENC}' FIPS_AES_ENC='${FIPS_AES_ENC}' BF_ENC='${BF_ENC}' CAST_ENC='${CAST_ENC}' RC4_ENC='${RC4_ENC}' RC5_ENC='${RC5_ENC}' SHA1_ASM_OBJ='${SHA1_ASM_OBJ}' FIPS_SHA1_ASM_OBJ='${FIPS_SHA1_ASM_OBJ}' MD5_ASM_OBJ='${MD5_ASM_OBJ}' RMD160_ASM_OBJ='${RMD160_ASM_OBJ}' AR='${AR}' PROCESSOR='${PROCESSOR}' PERL='${PERL}' RANLIB='${RANLIB}' KRB5_INCLUDES='${KRB5_INCLUDES}' LIBKRB5='${LIBKRB5}' EXE_EXT='${EXE_EXT}' SHARED_LIBS='${SHARED_LIBS}' SHLIB_EXT='${SHLIB_EXT}' SHLIB_TARGET='${SHLIB_TARGET}' all ) || exit 1; \
+	else \
+		$(MAKE) $$i; \
+	fi; \
+	done;
+
+sub_target:
+	@for i in $(DIRS); \
+	do \
+	if [ -d "$$i" ]; then \
+		(cd $$i && echo "making $(TARGET) in $$i..." && \
+		$(MAKE) CC='${CC}' PLATFORM='${PLATFORM}' CFLAG='${CFLAG}' AS='${AS}' ASFLAG='${ASFLAG}' SDIRS='$(SDIRS)' FDIRS='$(FDIRS)' INSTALLTOP='${INSTALLTOP}' PEX_LIBS='${PEX_LIBS}' EX_LIBS='${EX_LIBS}' BN_ASM='${BN_ASM}' DES_ENC='${DES_ENC}' FIPS_DES_ENC='${FIPS_DES_ENC}' FIPS_AES_ENC='${FIPS_AES_ENC}' BF_ENC='${BF_ENC}' CAST_ENC='${CAST_ENC}' RC4_ENC='${RC4_ENC}' RC5_ENC='${RC5_ENC}' SHA1_ASM_OBJ='${SHA1_ASM_OBJ}' FIPS_SHA1_ASM_OBJ='${FIPS_SHA1_ASM_OBJ}' MD5_ASM_OBJ='${MD5_ASM_OBJ}' RMD160_ASM_OBJ='${RMD160_ASM_OBJ}' AR='${AR}' PROCESSOR='${PROCESSOR}' PERL='${PERL}' RANLIB='${RANLIB}' KRB5_INCLUDES='${KRB5_INCLUDES}' LIBKRB5='${LIBKRB5}' EXE_EXT='${EXE_EXT}' SHARED_LIBS='${SHARED_LIBS}' SHLIB_EXT='${SHLIB_EXT}' SHLIB_TARGET='${SHLIB_TARGET}' TARGET='$(TARGET)' sub_target ) || exit 1; \
 	else \
 		$(MAKE) $$i; \
 	fi; \
@@ -265,39 +298,54 @@ do_bsd-gcc-shared: do_gnu-shared
 do_linux-shared: do_gnu-shared
 do_gnu-shared:
 	libs='-L. ${SHLIBDEPS}'; for i in ${SHLIBDIRS}; do \
-	( set -x; ${CC} ${SHARED_LDFLAGS} \
+	if [ "${SHLIBDIRS}" = "ssl" -a -n "$(LIBKRB5)" ]; then \
+		libs="$(LIBKRB5) $$libs"; \
+	fi; \
+	( set -x; $${FIPSLD:-${CC}} ${SHARED_LDFLAGS} \
 		-shared -o lib$$i.so.${SHLIB_MAJOR}.${SHLIB_MINOR} \
 		-Wl,-soname=lib$$i.so.${SHLIB_MAJOR}.${SHLIB_MINOR} \
 		-Wl,-Bsymbolic \
 		-Wl,--whole-archive lib$$i.a \
-		-Wl,--no-whole-archive $$libs ${EX_LIBS} -lc ) || exit 1; \
-	libs="$$libs -l$$i"; \
+		-Wl,--no-whole-archive $$libs ${EX_LIBS} ) || exit 1; \
+	libs="-l$$i $$libs"; \
 	done
 
-DETECT_GNU_LD=${CC} -v 2>&1 | grep '^gcc' >/dev/null 2>&1 && \
-	my_ld=`${CC} -print-prog-name=ld 2>&1` && \
-	[ -n "$$my_ld" ] && \
-	$$my_ld -v 2>&1 | grep 'GNU ld' >/dev/null 2>&1
+DETECT_GNU_LD=(${CC} -Wl,-V /dev/null 2>&1 | grep '^GNU ld' )>/dev/null
 
 # For Darwin AKA Mac OS/X (dyld)
 do_darwin-shared: 
 	libs='-L. ${SHLIBDEPS}'; for i in ${SHLIBDIRS}; do \
-	( set -x ; ${CC} --verbose -dynamiclib -o lib$$i${SHLIB_EXT} \
+	if [ "${SHLIBDIRS}" = "ssl" -a -n "$(LIBKRB5)" ]; then \
+		libs="$(LIBKRB5) $$libs"; \
+	fi; \
+	( set -x; $${FIPSLD:-${CC}} ${SHARED_LDFLAGS} \
+		--verbose -dynamiclib -o lib$$i${SHLIB_EXT} \
 		lib$$i.a $$libs -all_load -current_version ${SHLIB_MAJOR}.${SHLIB_MINOR} \
 		-compatibility_version ${SHLIB_MAJOR}.`echo ${SHLIB_MINOR} | cut -d. -f1` \
 		-install_name ${INSTALLTOP}/lib/lib$$i${SHLIB_EXT} ) || exit 1; \
-	libs="$$libs -l`basename $$i${SHLIB_EXT} .dylib`"; \
+	libs="-l`basename $$i${SHLIB_EXT} .dylib` $$libs"; \
 	echo "" ; \
 	done
 
 do_cygwin-shared:
 	libs='-L. ${SHLIBDEPS}'; for i in ${SHLIBDIRS}; do \
-	( set -x; ${CC}  -shared -o cyg$$i-$(SHLIB_VERSION_NUMBER).dll \
+	if [ "${SHLIBDIRS}" = "ssl" -a -n "$(LIBKRB5)" ]; then \
+		libs="$(LIBKRB5) $$libs"; \
+	fi; \
+	shlib=cyg$${i}-$(SHLIB_VERSION_NUMBER).dll; \
+	[ "$(PLATFORM)" = "mingw" ] && shlib=$${i}eay32.dll; \
+	[ -f apps/$$shlib ] && rm apps/$$shlib; \
+	[ -f test/$$shlib ] && rm test/$$shlib; \
+	base=;  [ $$i = "crypto" ] && base=-Wl,--image-base,0x63000000; \
+	( set -x; $${FIPSLD:-${CC}} ${SHARED_LDFLAGS} \
+		-shared $$base -o $$shlib \
 		-Wl,-Bsymbolic \
 		-Wl,--whole-archive lib$$i.a \
 		-Wl,--out-implib,lib$$i.dll.a \
-		-Wl,--no-whole-archive $$libs ) || exit 1; \
-	libs="$$libs -l$$i"; \
+		-Wl,--no-whole-archive $$libs ${EX_LIBS} ) || exit 1; \
+	cp -p $$shlib apps/; cp -p $$shlib test/; \
+	touch -c lib$$i.dll.a; \
+	libs="-l$$i $$libs"; \
 	done
 
 # This assumes that GNU utilities are *not* used
@@ -306,11 +354,14 @@ do_alpha-osf1-shared:
 		$(MAKE) do_gnu-shared; \
 	else \
 		libs='-L. ${SHLIBDEPS}'; for i in ${SHLIBDIRS}; do \
-		( set -x; ${CC} ${SHARED_LDFLAGS} \
+		if [ "${SHLIBDIRS}" = "ssl" -a -n "$(LIBKRB5)" ]; then \
+			libs="$(LIBKRB5) $$libs"; \
+		fi; \
+		( set -x; $${FIPSLD:-${CC}} ${SHARED_LDFLAGS} \
 			-shared -o lib$$i.so \
 			-set_version "${SHLIB_VERSION_HISTORY}${SHLIB_VERSION_NUMBER}" \
-			-all lib$$i.a -none $$libs ${EX_LIBS} -lc ) || exit 1; \
-		libs="$$libs -l$$i"; \
+			-all lib$$i.a -none $$libs ${EX_LIBS} ) || exit 1; \
+		libs="-l$$i $$libs"; \
 		done; \
 	fi
 
@@ -322,11 +373,14 @@ do_tru64-shared:
 		$(MAKE) do_gnu-shared; \
 	else \
 		libs='-L. ${SHLIBDEPS}'; for i in ${SHLIBDIRS}; do \
-		( set -x; ${CC} ${SHARED_LDFLAGS} \
+		if [ "${SHLIBDIRS}" = "ssl" -a -n "$(LIBKRB5)" ]; then \
+			libs="$(LIBKRB5) $$libs"; \
+		fi; \
+		( set -x; $${FIPSLD:-${CC}} ${SHARED_LDFLAGS} \
 			-shared -msym -o lib$$i.so \
 			-set_version "${SHLIB_VERSION_HISTORY}${SHLIB_VERSION_NUMBER}" \
-			-all lib$$i.a -none $$libs ${EX_LIBS} -lc ) || exit 1; \
-		libs="$$libs -l$$i"; \
+			-all lib$$i.a -none $$libs ${EX_LIBS} ) || exit 1; \
+		libs="-l$$i $$libs"; \
 		done; \
 	fi
 
@@ -338,12 +392,15 @@ do_tru64-shared-rpath:
 		$(MAKE) do_gnu-shared; \
 	else \
 		libs='-L. ${SHLIBDEPS}'; for i in ${SHLIBDIRS}; do \
-		( set -x; ${CC} ${SHARED_LDFLAGS} \
+		if [ "${SHLIBDIRS}" = "ssl" -a -n "$(LIBKRB5)" ]; then \
+			libs="$(LIBKRB5) $$libs"; \
+		fi; \
+		( set -x; $${FIPSLD:-${CC}} ${SHARED_LDFLAGS} \
 			-shared -msym -o lib$$i.so \
 			-rpath  ${INSTALLTOP}/lib \
 			-set_version "${SHLIB_VERSION_HISTORY}${SHLIB_VERSION_NUMBER}" \
-			-all lib$$i.a -none $$libs ${EX_LIBS} -lc ) || exit 1; \
-		libs="$$libs -l$$i"; \
+			-all lib$$i.a -none $$libs ${EX_LIBS} ) || exit 1; \
+		libs="-l$$i $$libs"; \
 		done; \
 	fi
 
@@ -354,12 +411,19 @@ do_solaris-shared:
 		$(MAKE) do_gnu-shared; \
 	else \
 		libs='-L. ${SHLIBDEPS}'; for i in ${SHLIBDIRS}; do \
+		if [ "${SHLIBDIRS}" = "ssl" -a -n "$(LIBKRB5)" ]; then \
+			libs="$(LIBKRB5) $$libs"; \
+		fi; \
 		( PATH=/usr/ccs/bin:$$PATH ; export PATH; \
-		  set -x; ${CC} ${SHARED_LDFLAGS} \
-			-G -o lib$$i.so.${SHLIB_MAJOR}.${SHLIB_MINOR} \
+		  MINUSZ='-z '; \
+		  (${CC} -v 2>&1 | grep gcc) > /dev/null && MINUSZ='-Wl,-z,'; \
+		  set -x; $${FIPSLD:-${CC}} ${SHARED_LDFLAGS} \
+			-o lib$$i.so.${SHLIB_MAJOR}.${SHLIB_MINOR} \
 			-h lib$$i.so.${SHLIB_MAJOR}.${SHLIB_MINOR} \
-			-z allextract lib$$i.a $$libs ${EX_LIBS} -lc ) || exit 1; \
-		libs="$$libs -l$$i"; \
+			-Wl,-Bsymbolic \
+			$${MINUSZ}allextract lib$$i.a $${MINUSZ}defaultextract \
+			$$libs ${EX_LIBS} ) || exit 1; \
+		libs="-l$$i $$libs"; \
 		done; \
 	fi
 
@@ -369,16 +433,20 @@ do_svr3-shared:
 		$(MAKE) do_gnu-shared; \
 	else \
 		libs='-L. ${SHLIBDEPS}'; for i in ${SHLIBDIRS}; do \
+		if [ "${SHLIBDIRS}" = "ssl" -a -n "$(LIBKRB5)" ]; then \
+			libs="$(LIBKRB5) $$libs"; \
+		fi; \
 		( PATH=/usr/ccs/bin:$$PATH ; export PATH; \
 		  find . -name "*.o" -print > allobjs ; \
 		  OBJS= ; export OBJS ; \
 		  for obj in `ar t lib$$i.a` ; do \
-		    OBJS="$${OBJS} `grep $$obj allobjs`" ; \
+		    OBJS="$${OBJS} `grep /$$obj allobjs`" ; \
 		  done ; \
-		  set -x; ${CC}  -G -o lib$$i.so.${SHLIB_MAJOR}.${SHLIB_MINOR} \
+		  set -x; $${FIPSLD:-${CC}} ${SHARED_LDFLAGS} \
+			-G -o lib$$i.so.${SHLIB_MAJOR}.${SHLIB_MINOR} \
 			-h lib$$i.so.${SHLIB_MAJOR}.${SHLIB_MINOR} \
 			$${OBJS} $$libs ${EX_LIBS} ) || exit 1; \
-		libs="$$libs -l$$i"; \
+		libs="-l$$i $$libs"; \
 		done; \
 	fi
 
@@ -388,17 +456,23 @@ do_svr5-shared:
 		$(MAKE) do_gnu-shared; \
 	else \
 		libs='-L. ${SHLIBDEPS}'; for i in ${SHLIBDIRS}; do \
+		if [ "${SHLIBDIRS}" = "ssl" -a -n "$(LIBKRB5)" ]; then \
+			libs="$(LIBKRB5) $$libs"; \
+		fi; \
 		( PATH=/usr/ccs/bin:$$PATH ; export PATH; \
+		  SHARE_FLAG='-G'; \
+		  (${CC} -v 2>&1 | grep gcc) > /dev/null && SHARE_FLAG='-shared'; \
 		  find . -name "*.o" -print > allobjs ; \
 		  OBJS= ; export OBJS ; \
 		  for obj in `ar t lib$$i.a` ; do \
-		    OBJS="$${OBJS} `grep $$obj allobjs`" ; \
+		    OBJS="$${OBJS} `grep /$$obj allobjs`" ; \
 		  done ; \
-		  set -x; ${CC} ${SHARED_LDFLAGS} \
-			-G -o lib$$i.so.${SHLIB_MAJOR}.${SHLIB_MINOR} \
+		  set -x; LD_LIBRARY_PATH=.:$$LD_LIBRARY_PATH \
+			$${FIPSLD:-${CC}} ${SHARED_LDFLAGS} \
+			$${SHARE_FLAG} -o lib$$i.so.${SHLIB_MAJOR}.${SHLIB_MINOR} \
 			-h lib$$i.so.${SHLIB_MAJOR}.${SHLIB_MINOR} \
 			$${OBJS} $$libs ${EX_LIBS} ) || exit 1; \
-		libs="$$libs -l$$i"; \
+		libs="-l$$i $$libs"; \
 		done; \
 	fi
 
@@ -408,53 +482,38 @@ do_irix-shared:
 		$(MAKE) do_gnu-shared; \
 	else \
 		libs='-L. ${SHLIBDEPS}'; for i in ${SHLIBDIRS}; do \
-		( set -x; ${CC} ${SHARED_LDFLAGS} \
+		if [ "${SHLIBDIRS}" = "ssl" -a -n "$(LIBKRB5)" ]; then \
+			libs="$(LIBKRB5) $$libs"; \
+		fi; \
+		( WHOLELIB="-all lib$$i.a -none"; \
+		  (${CC} -v 2>&1 | grep gcc) > /dev/null && WHOLELIB="-Wl,-all,lib$$i.a,-none"; \
+		  set -x; $${FIPSLD:-${CC}} ${SHARED_LDFLAGS} \
 			-shared -o lib$$i.so.${SHLIB_MAJOR}.${SHLIB_MINOR} \
 			-Wl,-soname,lib$$i.so.${SHLIB_MAJOR}.${SHLIB_MINOR} \
-			-all lib$$i.a $$libs ${EX_LIBS} -lc) || exit 1; \
-		libs="$$libs -l$$i"; \
+			$${WHOLELIB} $$libs ${EX_LIBS}) || exit 1; \
+		libs="-l$$i $$libs"; \
 		done; \
 	fi
 
 # This assumes that GNU utilities are *not* used
-# HP-UX includes the full pathname of libs we depend on, so we would get
-# ./libcrypto (with ./ as path information) compiled into libssl, hence
-# we omit the SHLIBDEPS. Applications must be linked with -lssl -lcrypto
-# anyway.
-# The object modules are loaded from lib$i.a using the undocumented -Fl
-# option.
-#
-# WARNING: Until DSO is fixed to support a search path, we support SHLIB_PATH
-#          by temporarily specifying "+s"!
 #
 do_hpux-shared:
 	for i in ${SHLIBDIRS}; do \
-	( set -x; /usr/ccs/bin/ld ${SHARED_LDFLAGS} \
- 		+vnocompatwarnings \
-		-b -z +s \
-		-o lib$$i.sl.${SHLIB_MAJOR}.${SHLIB_MINOR} \
-		+h lib$$i.sl.${SHLIB_MAJOR}.${SHLIB_MINOR} \
-		-Fl lib$$i.a -ldld -lc ) || exit 1; \
-	chmod a=rx lib$$i.sl.${SHLIB_MAJOR}.${SHLIB_MINOR}; \
-	done
-
-# This assumes that GNU utilities are *not* used
-# HP-UX includes the full pathname of libs we depend on, so we would get
-# ./libcrypto (with ./ as path information) compiled into libssl, hence
-# we omit the SHLIBDEPS. Applications must be linked with -lssl -lcrypto
-# anyway.
-#
-# HP-UX in 64bit mode has "+s" enabled by default; it will search for
-# shared libraries along LD_LIBRARY_PATH _and_ SHLIB_PATH.
-#
-do_hpux64-shared:
-	for i in ${SHLIBDIRS}; do \
-	( set -x; /usr/ccs/bin/ld ${SHARED_LDFLAGS} \
- 		-b -z \
-		-o lib$$i.sl.${SHLIB_MAJOR}.${SHLIB_MINOR} \
-		+h lib$$i.sl.${SHLIB_MAJOR}.${SHLIB_MINOR} \
-		+forceload lib$$i.a -ldl -lc ) || exit 1; \
-	chmod a=rx lib$$i.sl.${SHLIB_MAJOR}.${SHLIB_MINOR}; \
+	if [ "${SHLIBDIRS}" = "ssl" -a -n "$(LIBKRB5)" ]; then \
+		libs="$(LIBKRB5) $$libs"; \
+	fi; \
+	if expr $(PLATFORM) : '.*ia64' > /dev/null; then \
+		shlib=lib$$i.so.${SHLIB_MAJOR}.${SHLIB_MINOR}; \
+	else \
+		shlib=lib$$i.sl.${SHLIB_MAJOR}.${SHLIB_MINOR}; \
+	fi; \
+	[ -f $$shlib ] && rm -f $$shlib; \
+	ALLSYMSFLAGS='-Wl,-Fl'; \
+	expr $(PLATFORM) : 'hpux64' > /dev/null && ALLSYMSFLAGS='-Wl,+forceload'; \
+	( set -x; $${FIPSLD:-${CC}} ${SHARED_LDFLAGS} \
+		-Wl,-B,symbolic,+vnocompatwarnings,-z,+h,$$shlib \
+		-o $$shlib $$ALLSYMSFLAGS,lib$$i.a -ldld ) || exit 1; \
+	chmod a=rx $$shlib; \
 	done
 
 # The following method is said to work on all platforms.  Tests will
@@ -491,30 +550,39 @@ SHAREDFLAGS=${SHARED_LDFLAGS} -G -bE:lib$$i.exp -bM:SRE
 SHAREDCMD=$(CC)
 do_aix-shared:
 	libs='-L. ${SHLIBDEPS}'; for i in ${SHLIBDIRS}; do \
+	if [ "${SHLIBDIRS}" = "ssl" -a -n "$(LIBKRB5)" ]; then \
+		libs="$(LIBKRB5) $$libs"; \
+	fi; \
 	( set -x; \
-	  ld -r -o $$i.o $(ALLSYMSFLAG) lib$$i.a && \
+	  OBJECT_MODE=`expr x${SHARED_LDFLAGS} : 'x\-[a-z]\([0-9]*\)'`; \
+	  OBJECT_MODE=$${OBJECT_MODE:-32}; export OBJECT_MODE; \
+	  ld -r -o lib$$i.o $(ALLSYMSFLAG) lib$$i.a && \
 	  ( nm -Pg lib$$i.o | grep ' [BD] ' | cut -f1 -d' ' > lib$$i.exp; \
-	    $(SHAREDCMD) $(SHAREDFLAG) -o lib$$i.so lib$$i.o \
+	    $${FIPSLD:-${CC}} $(SHAREDFLAGS) \
+		-o lib$$i.so.${SHLIB_MAJOR}.${SHLIB_MINOR} lib$$i.o \
 		$$libs ${EX_LIBS} ) ) \
 	|| exit 1; \
-	libs="$$libs -l$$i"; \
+	libs="-l$$i $$libs"; \
 	done
 
 do_reliantunix-shared:
 	libs='-L. ${SHLIBDEPS}'; for i in ${SHLIBDIRS}; do \
+	if [ "${SHLIBDIRS}" = "ssl" -a -n "$(LIBKRB5)" ]; then \
+		libs="$(LIBKRB5) $$libs"; \
+	fi; \
 	tmpdir=/tmp/openssl.$$$$ ; rm -rf $$tmpdir ; \
 	( set -x; \
 	  ( Opwd=`pwd` ; mkdir $$tmpdir || exit 1; \
 	    cd $$tmpdir || exit 1 ; ar x $$Opwd/lib$$i.a ; \
-	    ${CC} -G -o lib$$i.so.${SHLIB_MAJOR}.${SHLIB_MINOR} *.o \
+	    $${FIPSLD:-${CC}} -G -o lib$$i.so.${SHLIB_MAJOR}.${SHLIB_MINOR} *.o \
 	  ) || exit 1; \
 	  cp $$tmpdir/lib$$i.so.${SHLIB_MAJOR}.${SHLIB_MINOR} . ; \
 	) || exit 1; \
 	rm -rf $$tmpdir ; \
-	libs="$$libs -l$$i"; \
+	libs="-l$$i $$libs"; \
 	done
 
-openssl.pc:
+openssl.pc: Makefile
 	@ ( echo 'prefix=$(INSTALLTOP)'; \
 	    echo 'exec_prefix=$${prefix}'; \
 	    echo 'libdir=$${exec_prefix}/lib'; \
@@ -524,29 +592,29 @@ openssl.pc:
 	    echo 'Description: Secure Sockets Layer and cryptography libraries and tools'; \
 	    echo 'Version: '$(VERSION); \
 	    echo 'Requires: '; \
-	    echo 'Libs: -L$${libdir} -lssl -lcrypto $(EX_LIBS)'; \
-	    echo 'Cflags: -I$${includedir}' ) > openssl.pc
+	    echo 'Libs: -L$${libdir} -lssl -lcrypto $(LIBKRB5) $(EX_LIBS)'; \
+	    echo 'Cflags: -I$${includedir} $(KRB5_INCLUDES)' ) > openssl.pc
 
-Makefile.ssl: Makefile.org
-	@echo "Makefile.ssl is older than Makefile.org."
+Makefile: Makefile.org
+	@echo "Makefile is older than Makefile.org."
 	@echo "Reconfigure the source tree (via './config' or 'perl Configure'), please."
 	@false
 
 libclean:
-	rm -f *.a */lib */*/lib
+	rm -f *.map *.so *.so.* engines/*.so *.a */lib */*/lib
 
-clean:
-	rm -f shlib/*.o *.o core a.out fluff *.map rehash.time testlog make.log cctest cctest.c
+clean:	libclean
+	rm -f shlib/*.o *.o core a.out fluff rehash.time testlog make.log cctest cctest.c
 	@for i in $(DIRS) ;\
 	do \
 	if [ -d "$$i" ]; then \
 		(cd $$i && echo "making clean in $$i..." && \
-		$(MAKE) SDIRS='${SDIRS}' clean ) || exit 1; \
+		$(MAKE) EXE_EXT='${EXE_EXT}' SDIRS='${SDIRS}' clean ) || exit 1; \
 		rm -f $(LIBS); \
 	fi; \
 	done;
 	rm -f openssl.pc
-	rm -f *.a *.o speed.* *.map *.so .pure core
+	rm -f speed.* .pure
 	rm -f $(TARFILE)
 	@for i in $(ONEDIRS) ;\
 	do \
@@ -558,7 +626,7 @@ makefile.one: files
 	sh util/do_ms.sh
 
 files:
-	$(PERL) $(TOP)/util/files.pl Makefile.ssl > $(TOP)/MINFO
+	$(PERL) $(TOP)/util/files.pl Makefile > $(TOP)/MINFO
 	@for i in $(DIRS) ;\
 	do \
 	if [ -d "$$i" ]; then \
@@ -568,19 +636,18 @@ files:
 	done;
 
 links:
-	@$(TOP)/util/point.sh Makefile.ssl Makefile
 	@$(PERL) $(TOP)/util/mkdir-p.pl include/openssl
 	@$(PERL) $(TOP)/util/mklink.pl include/openssl $(EXHEADER)
 	@for i in $(DIRS); do \
 	if [ -d "$$i" ]; then \
 		(cd $$i && echo "making links in $$i..." && \
-		$(MAKE) CC='${CC}' PLATFORM='${PLATFORM}' CFLAG='${CFLAG}' SDIRS='$(SDIRS)' INSTALLTOP='${INSTALLTOP}' PEX_LIBS='${PEX_LIBS}' EX_LIBS='${EX_LIBS}' BN_ASM='${BN_ASM}' DES_ENC='${DES_ENC}' BF_ENC='${BF_ENC}' CAST_ENC='${CAST_ENC}' RC4_ENC='${RC4_ENC}' RC5_ENC='${RC5_ENC}' SHA1_ASM_OBJ='${SHA1_ASM_OBJ}' MD5_ASM_OBJ='${MD5_ASM_OBJ}' RMD160_ASM_OBJ='${RMD160_ASM_OBJ}' AR='${AR}' PERL='${PERL}' KRB5_INCLUDES='${KRB5_INCLUDES}' LIBKRB5='${LIBKRB5}' links ) || exit 1; \
+		$(MAKE) CC='${CC}' PLATFORM='${PLATFORM}' CFLAG='${CFLAG}' SDIRS='$(SDIRS)' INSTALLTOP='${INSTALLTOP}' PEX_LIBS='${PEX_LIBS}' EX_LIBS='${EX_LIBS}' BN_ASM='${BN_ASM}' DES_ENC='${DES_ENC}' FIPS_DES_ENC='${FIPS_DES_ENC}' BF_ENC='${BF_ENC}' CAST_ENC='${CAST_ENC}' RC4_ENC='${RC4_ENC}' RC5_ENC='${RC5_ENC}' SHA1_ASM_OBJ='${SHA1_ASM_OBJ}' FIPS_SHA1_ASM_OBJ='${FIPS_SHA1_ASM_OBJ}' MD5_ASM_OBJ='${MD5_ASM_OBJ}' RMD160_ASM_OBJ='${RMD160_ASM_OBJ}' AR='${AR}' PERL='${PERL}' KRB5_INCLUDES='${KRB5_INCLUDES}' LIBKRB5='${LIBKRB5}' links ) || exit 1; \
 	fi; \
 	done;
 
 gentests:
 	@(cd test && echo "generating dummy tests (if needed)..." && \
-	$(MAKE) CC='${CC}' PLATFORM='${PLATFORM}' CFLAG='${CFLAG}' SDIRS='$(SDIRS)' INSTALLTOP='${INSTALLTOP}' PEX_LIBS='${PEX_LIBS}' EX_LIBS='${EX_LIBS}' BN_ASM='${BN_ASM}' DES_ENC='${DES_ENC}' BF_ENC='${BF_ENC}' CAST_ENC='${CAST_ENC}' RC4_ENC='${RC4_ENC}' RC5_ENC='${RC5_ENC}' SHA1_ASM_OBJ='${SHA1_ASM_OBJ}' MD5_ASM_OBJ='${MD5_ASM_OBJ}' RMD160_ASM_OBJ='${RMD160_ASM_OBJ}' AR='${AR}' PROCESSOR='${PROCESSOR}' PERL='${PERL}' RANLIB='${RANLIB}' TESTS='${TESTS}' KRB5_INCLUDES='${KRB5_INCLUDES}' LIBKRB5='${LIBKRB5}' EXE_EXT='${EXE_EXT}' SHARED_LIBS='${SHARED_LIBS}' SHLIB_EXT='${SHLIB_EXT}' SHLIB_TARGET='${SHLIB_TARGET}' TESTS='${TESTS}' OPENSSL_DEBUG_MEMORY=on generate );
+	$(MAKE) CC='${CC}' PLATFORM='${PLATFORM}' CFLAG='${CFLAG}' SDIRS='$(SDIRS)' INSTALLTOP='${INSTALLTOP}' PEX_LIBS='${PEX_LIBS}' EX_LIBS='${EX_LIBS}' BN_ASM='${BN_ASM}' DES_ENC='${DES_ENC}' FIPS_DES_ENC='${FIPS_DES_ENC}' BF_ENC='${BF_ENC}' CAST_ENC='${CAST_ENC}' RC4_ENC='${RC4_ENC}' RC5_ENC='${RC5_ENC}' SHA1_ASM_OBJ='${SHA1_ASM_OBJ}' FIPS_SHA1_ASM_OBJ='${FIPS_SHA1_ASM_OBJ}' MD5_ASM_OBJ='${MD5_ASM_OBJ}' RMD160_ASM_OBJ='${RMD160_ASM_OBJ}' AR='${AR}' PROCESSOR='${PROCESSOR}' PERL='${PERL}' RANLIB='${RANLIB}' TESTS='${TESTS}' KRB5_INCLUDES='${KRB5_INCLUDES}' LIBKRB5='${LIBKRB5}' EXE_EXT='${EXE_EXT}' SHARED_LIBS='${SHARED_LIBS}' SHLIB_EXT='${SHLIB_EXT}' SHLIB_TARGET='${SHLIB_TARGET}' TESTS='${TESTS}' OPENSSL_DEBUG_MEMORY=on generate );
 
 dclean:
 	rm -f *.bak
@@ -594,23 +661,18 @@ dclean:
 
 rehash: rehash.time
 rehash.time: certs
-	@(OPENSSL="`pwd`/apps/openssl"; OPENSSL_DEBUG_MEMORY=on; \
-		export OPENSSL OPENSSL_DEBUG_MEMORY; \
-		LD_LIBRARY_PATH="`pwd`"; DYLD_LIBRARY_PATH="`pwd`"; SHLIB_PATH="`pwd`"; LIBPATH="`pwd`"; \
-		if [ "$(PLATFORM)" != "Cygwin" ]; then PATH="`pwd`:$$PATH"; fi; \
-		export LD_LIBRARY_PATH DYLD_LIBRARY_PATH SHLIB_PATH LIBPATH PATH; \
-		$(PERL) tools/c_rehash certs)
+	@(OPENSSL="`pwd`/util/opensslwrap.sh"; \
+	  OPENSSL_DEBUG_MEMORY=on; \
+	  export OPENSSL OPENSSL_DEBUG_MEMORY; \
+	  $(PERL) tools/c_rehash certs)
 	touch rehash.time
 
 test:   tests
 
 tests: rehash
 	@(cd test && echo "testing..." && \
-	$(MAKE) CC='${CC}' PLATFORM='${PLATFORM}' CFLAG='${CFLAG}' SDIRS='$(SDIRS)' INSTALLTOP='${INSTALLTOP}' PEX_LIBS='${PEX_LIBS}' EX_LIBS='${EX_LIBS}' BN_ASM='${BN_ASM}' DES_ENC='${DES_ENC}' BF_ENC='${BF_ENC}' CAST_ENC='${CAST_ENC}' RC4_ENC='${RC4_ENC}' RC5_ENC='${RC5_ENC}' SHA1_ASM_OBJ='${SHA1_ASM_OBJ}' MD5_ASM_OBJ='${MD5_ASM_OBJ}' RMD160_ASM_OBJ='${RMD160_ASM_OBJ}' AR='${AR}' PROCESSOR='${PROCESSOR}' PERL='${PERL}' RANLIB='${RANLIB}' TESTS='${TESTS}' KRB5_INCLUDES='${KRB5_INCLUDES}' LIBKRB5='${LIBKRB5}' EXE_EXT='${EXE_EXT}' SHARED_LIBS='${SHARED_LIBS}' SHLIB_EXT='${SHLIB_EXT}' SHLIB_TARGET='${SHLIB_TARGET}' TESTS='${TESTS}' OPENSSL_DEBUG_MEMORY=on tests );
-	@LD_LIBRARY_PATH="`pwd`"; DYLD_LIBRARY_PATH="`pwd`"; SHLIB_PATH="`pwd`"; LIBPATH="`pwd`"; \
-		if [ "$(PLATFORM)" != "Cygwin" ]; then PATH="`pwd`:$$PATH"; fi; \
-		export LD_LIBRARY_PATH DYLD_LIBRARY_PATH SHLIB_PATH LIBPATH PATH; \
-		apps/openssl version -a
+	$(MAKE) CC='${CC}' PLATFORM='${PLATFORM}' CFLAG='${CFLAG}' SDIRS='$(SDIRS)' INSTALLTOP='${INSTALLTOP}' PEX_LIBS='${PEX_LIBS}' EX_LIBS='${EX_LIBS}' BN_ASM='${BN_ASM}' DES_ENC='${DES_ENC}' FIPS_DES_ENC='${FIPS_DES_ENC}' BF_ENC='${BF_ENC}' CAST_ENC='${CAST_ENC}' RC4_ENC='${RC4_ENC}' RC5_ENC='${RC5_ENC}' SHA1_ASM_OBJ='${SHA1_ASM_OBJ}' FIPS_SHA1_ASM_OBJ='${FIPS_SHA1_ASM_OBJ}' MD5_ASM_OBJ='${MD5_ASM_OBJ}' RMD160_ASM_OBJ='${RMD160_ASM_OBJ}' AR='${AR}' PROCESSOR='${PROCESSOR}' PERL='${PERL}' RANLIB='${RANLIB}' TESTS='${TESTS}' KRB5_INCLUDES='${KRB5_INCLUDES}' LIBKRB5='${LIBKRB5}' EXE_EXT='${EXE_EXT}' SHARED_LIBS='${SHARED_LIBS}' SHLIB_EXT='${SHLIB_EXT}' SHLIB_TARGET='${SHLIB_TARGET}' TESTS='${TESTS}' OPENSSL_DEBUG_MEMORY=on tests );
+	util/shlib_wrap.sh apps/openssl version -a
 
 report:
 	@$(PERL) util/selftest.pl
@@ -634,13 +696,8 @@ lint:
 	done;
 
 tags:
-	@for i in $(DIRS) ;\
-	do \
-	if [ -d "$$i" ]; then \
-		(cd $$i && echo "making tags $$i..." && \
-		$(MAKE) SDIRS='${SDIRS}' tags ) || exit 1; \
-	fi; \
-	done;
+	rm -f TAGS
+	find . -name '[^.]*.[ch]' | xargs etags -a
 
 errors:
 	$(PERL) util/mkerr.pl -recurse -write
@@ -660,11 +717,18 @@ crypto/objects/obj_dat.h: crypto/objects/obj_dat.pl crypto/objects/obj_mac.h
 crypto/objects/obj_mac.h: crypto/objects/objects.pl crypto/objects/objects.txt crypto/objects/obj_mac.num
 	$(PERL) crypto/objects/objects.pl crypto/objects/objects.txt crypto/objects/obj_mac.num crypto/objects/obj_mac.h
 
+apps/openssl-vms.cnf: apps/openssl.cnf
+	$(PERL) VMS/VMSify-conf.pl < apps/openssl.cnf > apps/openssl-vms.cnf
+
+crypto/bn/bn_prime.h: crypto/bn/bn_prime.pl
+	$(PERL) crypto/bn/bn_prime.pl >crypto/bn/bn_prime.h
+
+
 TABLE: Configure
 	(echo 'Output of `Configure TABLE'"':"; \
 	$(PERL) Configure TABLE) > TABLE
 
-update: depend errors stacks util/libeay.num util/ssleay.num crypto/objects/obj_dat.h TABLE
+update: errors stacks util/libeay.num util/ssleay.num crypto/objects/obj_dat.h apps/openssl-vms.cnf crypto/bn/bn_prime.h TABLE depend
 
 # Build distribution tar-file. As the list of files returned by "find" is
 # pretty long, on several platforms a "too many arguments" error or similar
@@ -701,16 +765,17 @@ dist:
 dist_pem_h:
 	(cd crypto/pem; $(MAKE) CC='${CC}' SDIRS='${SDIRS}' CFLAG='${CFLAG}' pem.h; $(MAKE) clean)
 
-install: all install_docs
+install: all install_docs install_sw
+
+install_sw:
 	@$(PERL) $(TOP)/util/mkdir-p.pl $(INSTALL_PREFIX)$(INSTALLTOP)/bin \
 		$(INSTALL_PREFIX)$(INSTALLTOP)/lib \
-		$(INSTALL_PREFIX)$(INSTALLTOP)/lib/pkginfo \
+		$(INSTALL_PREFIX)$(INSTALLTOP)/lib/pkgconfig \
 		$(INSTALL_PREFIX)$(INSTALLTOP)/include/openssl \
 		$(INSTALL_PREFIX)$(OPENSSLDIR)/misc \
 		$(INSTALL_PREFIX)$(OPENSSLDIR)/certs \
-		$(INSTALL_PREFIX)$(OPENSSLDIR)/private \
-		$(INSTALL_PREFIX)$(OPENSSLDIR)/lib
-	@for i in $(EXHEADER) ;\
+		$(INSTALL_PREFIX)$(OPENSSLDIR)/private
+	@headerlist="$(EXHEADER)"; for i in $$headerlist ;\
 	do \
 	(cp $$i $(INSTALL_PREFIX)$(INSTALLTOP)/include/openssl/$$i; \
 	chmod 644 $(INSTALL_PREFIX)$(INSTALLTOP)/include/openssl/$$i ); \
@@ -727,9 +792,13 @@ install: all install_docs
 		if [ -f "$$i" ]; then \
 		(       echo installing $$i; \
 			cp $$i $(INSTALL_PREFIX)$(INSTALLTOP)/lib/$$i.new; \
-			$(RANLIB) $(INSTALL_PREFIX)$(INSTALLTOP)/lib/$$i.new; \
+			if egrep 'define OPENSSL_FIPS' $(TOP)/include/openssl/opensslconf.h > /dev/null; then \
+				: ; \
+			else \
+				$(RANLIB) $(INSTALL_PREFIX)$(INSTALLTOP)/lib/$$i.new; \
+			fi; \
 			chmod 644 $(INSTALL_PREFIX)$(INSTALLTOP)/lib/$$i.new; \
-			mv $(INSTALL_PREFIX)$(INSTALLTOP)/lib/$$i.new $(INSTALL_PREFIX)$(INSTALLTOP)/lib/$$i ); \
+			mv -f $(INSTALL_PREFIX)$(INSTALLTOP)/lib/$$i.new $(INSTALL_PREFIX)$(INSTALLTOP)/lib/$$i ); \
 		fi; \
 	done;
 	@if [ -n "$(SHARED_LIBS)" ]; then \
@@ -741,15 +810,15 @@ install: all install_docs
 				if [ "$(PLATFORM)" != "Cygwin" ]; then \
 					cp $$i $(INSTALL_PREFIX)$(INSTALLTOP)/lib/$$i.new; \
 					chmod 555 $(INSTALL_PREFIX)$(INSTALLTOP)/lib/$$i.new; \
-					mv $(INSTALL_PREFIX)$(INSTALLTOP)/lib/$$i.new $(INSTALL_PREFIX)$(INSTALLTOP)/lib/$$i; \
+					mv -f $(INSTALL_PREFIX)$(INSTALLTOP)/lib/$$i.new $(INSTALL_PREFIX)$(INSTALLTOP)/lib/$$i; \
 				else \
-					c=`echo $$i | sed 's/^lib\(.*\)/cyg\1-$(SHLIB_VERSION_NUMBER)/'`; \
+					c=`echo $$i | sed 's/^lib\(.*\)\.dll/cyg\1-$(SHLIB_VERSION_NUMBER).dll/'`; \
 					cp $$c $(INSTALL_PREFIX)$(INSTALLTOP)/bin/$$c.new; \
 					chmod 755 $(INSTALL_PREFIX)$(INSTALLTOP)/bin/$$c.new; \
-					mv $(INSTALL_PREFIX)$(INSTALLTOP)/bin/$$c.new $(INSTALL_PREFIX)$(INSTALLTOP)/bin/$$c; \
+					mv -f $(INSTALL_PREFIX)$(INSTALLTOP)/bin/$$c.new $(INSTALL_PREFIX)$(INSTALLTOP)/bin/$$c; \
 					cp $$i.a $(INSTALL_PREFIX)$(INSTALLTOP)/lib/$$i.a.new; \
 					chmod 644 $(INSTALL_PREFIX)$(INSTALLTOP)/lib/$$i.a.new; \
-					mv $(INSTALL_PREFIX)$(INSTALLTOP)/lib/$$i.a.new $(INSTALL_PREFIX)$(INSTALLTOP)/lib/$$i.a; \
+					mv -f $(INSTALL_PREFIX)$(INSTALLTOP)/lib/$$i.a.new $(INSTALL_PREFIX)$(INSTALLTOP)/lib/$$i.a; \
 				fi ); \
 			fi; \
 		done; \
@@ -757,8 +826,15 @@ install: all install_docs
 			cd $(INSTALL_PREFIX)$(INSTALLTOP)/lib; \
 			set $(MAKE); \
 			$$1 -f $$here/Makefile link-shared ); \
+		if [ "$(INSTALLTOP)" != "/usr" ]; then \
+			echo 'OpenSSL shared libraries have been installed in:'; \
+			echo '  $(INSTALLTOP)'; \
+			echo ''; \
+			sed -e '1,/^$$/d' doc/openssl-shared.txt; \
+		fi; \
 	fi
-	cp openssl.pc $(INSTALL_PREFIX)$(INSTALLTOP)/lib/pkginfo
+	cp openssl.pc $(INSTALL_PREFIX)$(INSTALLTOP)/lib/pkgconfig
+	chmod 644 $(INSTALL_PREFIX)$(INSTALLTOP)/lib/pkgconfig/openssl.pc
 
 install_docs:
 	@$(PERL) $(TOP)/util/mkdir-p.pl \
@@ -767,25 +843,44 @@ install_docs:
 		$(INSTALL_PREFIX)$(MANDIR)/man5 \
 		$(INSTALL_PREFIX)$(MANDIR)/man7
 	@pod2man="`cd util; ./pod2mantest $(PERL)`"; \
+	here="`pwd`"; \
+	filecase=; \
+	if [ "$(PLATFORM)" = "DJGPP" -o "$(PLATFORM)" = "Cygwin" -o "$(PLATFORM)" = "mingw" ]; then \
+		filecase=-i; \
+	fi; \
 	for i in doc/apps/*.pod; do \
 		fn=`basename $$i .pod`; \
 		if [ "$$fn" = "config" ]; then sec=5; else sec=1; fi; \
-		echo "installing man$$sec/`basename $$i .pod`.$$sec"; \
+		echo "installing man$$sec/$$fn.$${sec}$(MANSUFFIX)"; \
 		(cd `$(PERL) util/dirname.pl $$i`; \
 		sh -c "$$pod2man \
 			--section=$$sec --center=OpenSSL \
 			--release=$(VERSION) `basename $$i`") \
-			>  $(INSTALL_PREFIX)$(MANDIR)/man$$sec/`basename $$i .pod`.$$sec; \
+			>  $(INSTALL_PREFIX)$(MANDIR)/man$$sec/$$fn.$${sec}$(MANSUFFIX); \
+		$(PERL) util/extract-names.pl < $$i | \
+			(grep -v $$filecase "^$$fn\$$"; true) | \
+			(grep -v "[	]"; true) | \
+			(cd $(INSTALL_PREFIX)$(MANDIR)/man$$sec/; \
+			 while read n; do \
+				$$here/util/point.sh $$fn.$${sec}$(MANSUFFIX) "$$n".$${sec}$(MANSUFFIX); \
+			 done); \
 	done; \
 	for i in doc/crypto/*.pod doc/ssl/*.pod; do \
 		fn=`basename $$i .pod`; \
 		if [ "$$fn" = "des_modes" ]; then sec=7; else sec=3; fi; \
-		echo "installing man$$sec/`basename $$i .pod`.$$sec"; \
+		echo "installing man$$sec/$$fn.$${sec}$(MANSUFFIX)"; \
 		(cd `$(PERL) util/dirname.pl $$i`; \
 		sh -c "$$pod2man \
 			--section=$$sec --center=OpenSSL \
 			--release=$(VERSION) `basename $$i`") \
-			>  $(INSTALL_PREFIX)$(MANDIR)/man$$sec/`basename $$i .pod`.$$sec; \
+			>  $(INSTALL_PREFIX)$(MANDIR)/man$$sec/$$fn.$${sec}$(MANSUFFIX); \
+		$(PERL) util/extract-names.pl < $$i | \
+			(grep -v $$filecase "^$$fn\$$"; true) | \
+			(grep -v "[	]"; true) | \
+			(cd $(INSTALL_PREFIX)$(MANDIR)/man$$sec/; \
+			 while read n; do \
+				$$here/util/point.sh $$fn.$${sec}$(MANSUFFIX) "$$n".$${sec}$(MANSUFFIX); \
+			 done); \
 	done
 
 # DO NOT DELETE THIS LINE -- make depend depends on it.

NEWS

@@ -5,6 +5,79 @@
   This file gives a brief overview of the major changes between each OpenSSL
   release. For more details please read the CHANGES file.
 
+  Major changes between OpenSSL 0.9.7i and OpenSSL 0.9.7j:
+
+      o Update Windows build system for FIPS.
+
+  Major changes between OpenSSL 0.9.7h and OpenSSL 0.9.7i:
+
+      o Give EVP_MAX_MD_SIZE it's old value, except for a FIPS build.
+
+  Major changes between OpenSSL 0.9.7g and OpenSSL 0.9.7h:
+
+      o Fix SSL 2.0 Rollback, CAN-2005-2969
+      o Allow use of fixed-length exponent on DSA signing
+      o Default fixed-window RSA, DSA, DH private-key operations
+
+  Major changes between OpenSSL 0.9.7f and OpenSSL 0.9.7g:
+
+      o More compilation issues fixed.
+      o Adaptation to more modern Kerberos API.
+      o Enhanced or corrected configuration for Solaris64, Mingw and Cygwin.
+      o Enhanced x86_64 assembler BIGNUM module.
+      o More constification.
+      o Added processing of proxy certificates (RFC 3820).
+
+  Major changes between OpenSSL 0.9.7e and OpenSSL 0.9.7f:
+
+      o Several compilation issues fixed.
+      o Many memory allocation failure checks added.
+      o Improved comparison of X509 Name type.
+      o Mandatory basic checks on certificates.
+      o Performance improvements.
+
+  Major changes between OpenSSL 0.9.7d and OpenSSL 0.9.7e:
+
+      o Fix race condition in CRL checking code.
+      o Fixes to PKCS#7 (S/MIME) code.
+
+  Major changes between OpenSSL 0.9.7c and OpenSSL 0.9.7d:
+
+      o Security: Fix Kerberos ciphersuite SSL/TLS handshaking bug
+      o Security: Fix null-pointer assignment in do_change_cipher_spec()
+      o Allow multiple active certificates with same subject in CA index
+      o Multiple X509 verification fixes
+      o Speed up HMAC and other operations
+
+  Major changes between OpenSSL 0.9.7b and OpenSSL 0.9.7c:
+
+      o Security: fix various ASN1 parsing bugs.
+      o New -ignore_err option to OCSP utility.
+      o Various interop and bug fixes in S/MIME code.
+      o SSL/TLS protocol fix for unrequested client certificates.
+
+  Major changes between OpenSSL 0.9.7a and OpenSSL 0.9.7b:
+
+      o Security: counter the Klima-Pokorny-Rosa extension of
+        Bleichbacher's attack 
+      o Security: make RSA blinding default.
+      o Configuration: Irix fixes, AIX fixes, better mingw support.
+      o Support for new platforms: linux-ia64-ecc.
+      o Build: shared library support fixes.
+      o ASN.1: treat domainComponent correctly.
+      o Documentation: fixes and additions.
+
+  Major changes between OpenSSL 0.9.7 and OpenSSL 0.9.7a:
+
+      o Security: Important security related bugfixes.
+      o Enhanced compatibility with MIT Kerberos.
+      o Can be built without the ENGINE framework.
+      o IA32 assembler enhancements.
+      o Support for new platforms: FreeBSD/IA64 and FreeBSD/Sparc64.
+      o Configuration: the no-err option now works properly.
+      o SSL/TLS: now handles manual certificate chain building.
+      o SSL/TLS: certain session ID malfunctions corrected.
+
   Major changes between OpenSSL 0.9.6 and OpenSSL 0.9.7:
 
       o New library section OCSP.
@@ -17,11 +90,15 @@
         a separate distribution.
       o New elliptic curve library section.
       o New AES (Rijndael) library section.
-      o Support for new platforms: Windows CE, Tandem OSS, A/UX, AIX 64-bit
+      o Support for new platforms: Windows CE, Tandem OSS, A/UX, AIX 64-bit,
+        Linux x86_64, Linux 64-bit on Sparc v9
       o Extended support for some platforms: VxWorks
       o Enhanced support for shared libraries.
+      o Now only builds PIC code when shared library support is requested.
       o Support for pkg-config.
       o Lots of new manuals.
+      o Makes symbolic links to or copies of manuals to cover all described
+        functions.
       o Change DES API to clean up the namespace (some applications link also
         against libdes providing similar functions having the same name).
         Provide macros for backward compatibility (will be removed in the
@@ -42,10 +119,27 @@
       o SSL/TLS: allow optional cipher choice according to server's preference.
       o SSL/TLS: allow server to explicitly set new session ids.
       o SSL/TLS: support Kerberos cipher suites (RFC2712).
+	Only supports MIT Kerberos for now.
       o SSL/TLS: allow more precise control of renegotiations and sessions.
       o SSL/TLS: add callback to retrieve SSL/TLS messages.
       o SSL/TLS: support AES cipher suites (RFC3268).
 
+  Major changes between OpenSSL 0.9.6j and OpenSSL 0.9.6k:
+
+      o Security: fix various ASN1 parsing bugs.
+      o SSL/TLS protocol fix for unrequested client certificates.
+
+  Major changes between OpenSSL 0.9.6i and OpenSSL 0.9.6j:
+
+      o Security: counter the Klima-Pokorny-Rosa extension of
+        Bleichbacher's attack 
+      o Security: make RSA blinding default.
+      o Build: shared library support fixes.
+
+  Major changes between OpenSSL 0.9.6h and OpenSSL 0.9.6i:
+
+      o Important security related bugfixes.
+
   Major changes between OpenSSL 0.9.6g and OpenSSL 0.9.6h:
 
       o New configuration targets for Tandem OSS and A/UX.

PROBLEMS

@@ -12,8 +12,8 @@ along the whole library path before it bothers looking for .a libraries.  This
 means that -L switches won't matter unless OpenSSL is built with shared
 library support.
 
-The workaround may be to change the following lines in apps/Makefile.ssl and
-test/Makefile.ssl:
+The workaround may be to change the following lines in apps/Makefile and
+test/Makefile:
 
   LIBCRYPTO=-L.. -lcrypto
   LIBSSL=-L.. -lssl
@@ -46,3 +46,119 @@ scripts use the same name for output and input files, which means different
 will interfere with each other and lead to test failure.
 
 The solution is simple for now: don't run parallell make when testing.
+
+
+* Bugs in gcc triggered
+
+- According to a problem report, there are bugs in gcc 3.0 that are
+  triggered by some of the code in OpenSSL, more specifically in
+  PEM_get_EVP_CIPHER_INFO().  The triggering code is the following:
+
+	header+=11;
+	if (*header != '4') return(0); header++;
+	if (*header != ',') return(0); header++;
+
+  What happens is that gcc might optimize a little too agressively, and
+  you end up with an extra incrementation when *header != '4'.
+
+  We recommend that you upgrade gcc to as high a 3.x version as you can.
+
+- According to multiple problem reports, some of our message digest
+  implementations trigger bug[s] in code optimizer in gcc 3.3 for sparc64
+  and gcc 2.96 for ppc. Former fails to complete RIPEMD160 test, while
+  latter - SHA one.
+
+  The recomendation is to upgrade your compiler. This naturally applies to
+  other similar cases.
+
+* solaris64-sparcv9-cc SHA-1 performance with WorkShop 6 compiler.
+
+As subject suggests SHA-1 might perform poorly (4 times slower)
+if compiled with WorkShop 6 compiler and -xarch=v9. The cause for
+this seems to be the fact that compiler emits multiplication to
+perform shift operations:-( To work the problem around configure
+with './Configure solaris64-sparcv9-cc -DMD32_REG_T=int'.
+
+* Problems with hp-parisc2-cc target when used with "no-asm" flag
+
+When using the hp-parisc2-cc target, wrong bignum code is generated.
+This is due to the SIXTY_FOUR_BIT build being compiled with the +O3
+aggressive optimization.
+The problem manifests itself by the BN_kronecker test hanging in an
+endless loop. Reason: the BN_kronecker test calls BN_generate_prime()
+which itself hangs. The reason could be tracked down to the bn_mul_comba8()
+function in bn_asm.c. At some occasions the higher 32bit value of r[7]
+is off by 1 (meaning: calculated=shouldbe+1). Further analysis failed,
+as no debugger support possible at +O3 and additional fprintf()'s
+introduced fixed the bug, therefore it is most likely a bug in the
+optimizer.
+The bug was found in the BN_kronecker test but may also lead to
+failures in other parts of the code.
+(See Ticket #426.)
+
+Workaround: modify the target to +O2 when building with no-asm.
+
+* Problems building shared libraries on SCO OpenServer Release 5.0.6
+  with gcc 2.95.3
+
+The symptoms appear when running the test suite, more specifically
+test/ectest, with the following result:
+
+OSSL_LIBPATH="`cd ..; pwd`"; LD_LIBRARY_PATH="$OSSL_LIBPATH:$LD_LIBRARY_PATH"; DYLD_LIBRARY_PATH="$OSSL_LIBPATH:$DYLD_LIBRARY_PATH"; SHLIB_PATH="$OSSL_LIBPATH:$SHLIB_PATH"; LIBPATH="$OSSL_LIBPATH:$LIBPATH"; if [ "debug-sco5-gcc" = "Cygwin" ]; then PATH="${LIBPATH}:$PATH"; fi; export LD_LIBRARY_PATH DYLD_LIBRARY_PATH SHLIB_PATH LIBPATH PATH; ./ectest
+ectest.c:186: ABORT
+
+The cause of the problem seems to be that isxdigit(), called from
+BN_hex2bn(), returns 0 on a perfectly legitimate hex digit.  Further
+investigation shows that any of the isxxx() macros return 0 on any
+input.  A direct look in the information array that the isxxx() use,
+called __ctype, shows that it contains all zeroes...
+
+Taking a look at the newly created libcrypto.so with nm, one can see
+that the variable __ctype is defined in libcrypto's .bss (which
+explains why it is filled with zeroes):
+
+$ nm -Pg libcrypto.so | grep __ctype
+__ctype B 0011659c
+__ctype2 U         
+
+Curiously, __ctype2 is undefined, in spite of being declared in
+/usr/include/ctype.h in exactly the same way as __ctype.
+
+Any information helping to solve this issue would be deeply
+appreciated.
+
+NOTE: building non-shared doesn't come with this problem.
+
+* ULTRIX build fails with shell errors, such as "bad substitution"
+  and "test: argument expected"
+
+The problem is caused by ULTRIX /bin/sh supporting only original
+Bourne shell syntax/semantics, and the trouble is that the vast
+majority is so accustomed to more modern syntax, that very few
+people [if any] would recognize the ancient syntax even as valid.
+This inevitably results in non-trivial scripts breaking on ULTRIX,
+and OpenSSL isn't an exclusion. Fortunately there is workaround,
+hire /bin/ksh to do the job /bin/sh fails to do.
+
+1. Trick make(1) to use /bin/ksh by setting up following environ-
+   ment variables *prior* you execute ./Configure and make:
+
+	PROG_ENV=POSIX
+	MAKESHELL=/bin/ksh
+	export PROG_ENV MAKESHELL
+
+   or if your shell is csh-compatible:
+
+	setenv PROG_ENV POSIX
+	setenv MAKESHELL /bin/ksh
+
+2. Trick /bin/sh to use alternative expression evaluator. Create
+   following 'test' script for example in /tmp:
+
+	#!/bin/ksh
+	${0##*/} "$@"
+
+   Then 'chmod a+x /tmp/test; ln /tmp/test /tmp/[' and *prepend*
+   your $PATH with chosen location, e.g. PATH=/tmp:$PATH. Alter-
+   natively just replace system /bin/test and /bin/[ with the
+   above script.

README

@@ -1,7 +1,7 @@
 
- OpenSSL 0.9.7-beta4 19 Nov 2002
+ OpenSSL 0.9.7j-dev XX xxx XXXX
 
- Copyright (c) 1998-2002 The OpenSSL Project
+ Copyright (c) 1998-2005 The OpenSSL Project
  Copyright (c) 1995-1998 Eric A. Young, Tim J. Hudson
  All rights reserved.
 
@@ -14,13 +14,13 @@
  protocols as well as a full-strength general purpose cryptography library.
  The project is managed by a worldwide community of volunteers that use the
  Internet to communicate, plan, and develop the OpenSSL toolkit and its
- related documentation. 
+ related documentation.
 
  OpenSSL is based on the excellent SSLeay library developed from Eric A. Young
  and Tim J. Hudson.  The OpenSSL toolkit is licensed under a dual-license (the
  OpenSSL license plus the SSLeay license) situation, which basically means
  that you are free to get and use it for commercial and non-commercial
- purposes as long as you fulfill the conditions of both licenses. 
+ purposes as long as you fulfill the conditions of both licenses.
 
  OVERVIEW
  --------
@@ -53,11 +53,11 @@
         MDC2 message digest. A DES based hash that is popular on smart cards.
 
      Public Key
-        RSA encryption/decryption/generation.  
+        RSA encryption/decryption/generation.
             There is no limit on the number of bits.
-        DSA encryption/decryption/generation.   
+        DSA encryption/decryption/generation.
             There is no limit on the number of bits.
-        Diffie-Hellman key-exchange/key generation.  
+        Diffie-Hellman key-exchange/key generation.
             There is no limit on the number of bits.
 
      X.509v3 certificates
@@ -80,16 +80,16 @@
         A simple stack.
         A Configuration loader that uses a format similar to MS .ini files.
 
- openssl: 
+ openssl:
      A command line tool that can be used for:
         Creation of RSA, DH and DSA key parameters
-        Creation of X.509 certificates, CSRs and CRLs 
+        Creation of X.509 certificates, CSRs and CRLs
         Calculation of Message Digests
         Encryption and Decryption with Ciphers
         SSL/TLS Client and Server Tests
         Handling of S/MIME signed or encrypted mail
 
-        
+
  PATENTS
  -------
 
@@ -104,13 +104,15 @@
  licensing conditions. Their web page is http://www.rsasecurity.com/.
 
  RC4 is a trademark of RSA Security, so use of this label should perhaps
- only be used with RSA Security's permission. 
+ only be used with RSA Security's permission.
 
  The IDEA algorithm is patented by Ascom in Austria, France, Germany, Italy,
  Japan, the Netherlands, Spain, Sweden, Switzerland, UK and the USA.  They
  should be contacted if that algorithm is to be used; their web page is
  http://www.ascom.ch/.
 
+ The MDC2 algorithm is patented by IBM.
+
  INSTALLATION
  ------------
 
@@ -129,7 +131,7 @@
  or application author.  We try to collect those in doc/PROBLEMS, with current
  thoughts on how they should be solved in a future of OpenSSL.
 
- SUPPORT 
+ SUPPORT
  -------
 
  If you have any problems with OpenSSL then please take the following steps
@@ -138,7 +140,7 @@
     - Download the current snapshot from ftp://ftp.openssl.org/snapshot/
       to see if the problem has already been addressed
     - Remove ASM versions of libraries
-    - Remove compiler optimisation flags 
+    - Remove compiler optimisation flags
 
  If you wish to report a bug then please include the following information in
  any bug report:
@@ -173,11 +175,17 @@
  textual explanation of what your patch does.
 
  Note: For legal reasons, contributions from the US can be accepted only
- if a TSA notification and a copy of the patch is sent to crypt@bis.doc.gov;
- see http://www.bis.doc.gov/Encryption/PubAvailEncSourceCodeNofify.html [sic]
- and http://w3.access.gpo.gov/bis/ear/pdf/740.pdf (EAR Section 740.13(e)).
+ if a TSU notification and a copy of the patch are sent to crypt@bis.doc.gov
+ (formerly BXA) with a copy to the ENC Encryption Request Coordinator;
+ please take some time to look at
+    http://www.bis.doc.gov/Encryption/PubAvailEncSourceCodeNofify.html [sic]
+ and
+    http://w3.access.gpo.gov/bis/ear/pdf/740.pdf (EAR Section 740.13(e))
+ for the details. If "your encryption source code is too large to serve as
+ an email attachment", they are glad to receive it by fax instead; hope you
+ have a cheap long-distance plan.
 
- The preferred format for changes is "diff -u" output. You might
+ Our preferred format for changes is "diff -u" output. You might
  generate it like this:
 
  # cd openssl-work
@@ -185,3 +193,4 @@
  # ./Configure dist; make clean
  # cd ..
  # diff -ur openssl-orig openssl-work > mydiffs.patch
+

STATUS

@@ -1,14 +1,28 @@
 
   OpenSSL STATUS                           Last modified at
-  ______________                           $Date: 2002/11/19 09:34:38 $
+  ______________                           $Date: 2005/10/14 22:15:44 $
 
   DEVELOPMENT STATE
 
-    o  OpenSSL 0.9.8:  Under development...
-    o  OpenSSL 0.9.7-beta4: Released on November 19th, 2002
-    o  OpenSSL 0.9.7-beta3: Released on July 30th, 2002
-    o  OpenSSL 0.9.7-beta2: Released on June 16th, 2002
-    o  OpenSSL 0.9.7-beta1: Released on June  1st, 2002
+    o  OpenSSL 0.9.9:  Under development...
+    o  OpenSSL 0.9.8a: Released on October   11th, 2005
+    o  OpenSSL 0.9.8:  Released on July       5th, 2005
+    o  OpenSSL 0.9.7i: Released on October   14th, 2005
+    o  OpenSSL 0.9.7h: Released on October   11th, 2005
+    o  OpenSSL 0.9.7g: Released on April     11th, 2005
+    o  OpenSSL 0.9.7f: Released on March     22nd, 2005
+    o  OpenSSL 0.9.7e: Released on October   25th, 2004
+    o  OpenSSL 0.9.7d: Released on March     17th, 2004
+    o  OpenSSL 0.9.7c: Released on September 30th, 2003
+    o  OpenSSL 0.9.7b: Released on April     10th, 2003
+    o  OpenSSL 0.9.7a: Released on February  19th, 2003
+    o  OpenSSL 0.9.7:  Released on December  31st, 2002
+    o  OpenSSL 0.9.6m: Released on March     17th, 2004
+    o  OpenSSL 0.9.6l: Released on November   4th, 2003
+    o  OpenSSL 0.9.6k: Released on September 30th, 2003
+    o  OpenSSL 0.9.6j: Released on April     10th, 2003
+    o  OpenSSL 0.9.6i: Released on February  19th, 2003
+    o  OpenSSL 0.9.6h: Released on December   5th, 2002
     o  OpenSSL 0.9.6g: Released on August     9th, 2002
     o  OpenSSL 0.9.6f: Released on August     8th, 2002
     o  OpenSSL 0.9.6e: Released on July      30th, 2002
@@ -29,8 +43,7 @@
 
   RELEASE SHOWSTOPPERS
 
-    o BN_mod_mul verification fails for mips3-sgi-irix
-      unless configured with no-asm
+    o 
 
   AVAILABLE PATCHES
 
@@ -53,9 +66,8 @@
 	UTIL (a new set of library functions to support some higher level
 	      functionality that is currently missing).
 	Shared library support for VMS.
-	Kerberos 5 authentication
+	Kerberos 5 authentication (Heimdal)
 	Constification
-	OCSP
 
   NEEDS PATCH
 

VMS/VMSify-conf.pl

@@ -0,0 +1,34 @@
+#! /usr/bin/perl
+
+use strict;
+use warnings;
+
+my @directory_vars = ( "dir", "certs", "crl_dir", "new_certs_dir" );
+my @file_vars = ( "database", "certificate", "serial", "crlnumber",
+		  "crl", "private_key", "RANDFILE" );
+while(<STDIN>) {
+    chomp;
+    foreach my $d (@directory_vars) {
+	if (/^(\s*\#?\s*${d}\s*=\s*)\.\/([^\s\#]*)([\s\#].*)$/) {
+	    $_ = "$1sys\\\$disk:\[.$2$3";
+	} elsif (/^(\s*\#?\s*${d}\s*=\s*)(\w[^\s\#]*)([\s\#].*)$/) {
+	    $_ = "$1sys\\\$disk:\[.$2$3";
+	}
+	s/^(\s*\#?\s*${d}\s*=\s*\$\w+)\/([^\s\#]*)([\s\#].*)$/$1.$2\]$3/;
+	while(/^(\s*\#?\s*${d}\s*=\s*(\$\w+\.|sys\\\$disk:\[\.)[\w\.]+)\/([^\]]*)\](.*)$/) {
+	    $_ = "$1.$3]$4";
+	}
+    }
+    foreach my $f (@file_vars) {
+	s/^(\s*\#?\s*${f}\s*=\s*)\.\/(.*)$/$1sys\\\$disk:\[\/$2/;
+	while(/^(\s*\#?\s*${f}\s*=\s*(\$\w+|sys\\\$disk:\[)[^\/]*)\/(\w+\/[^\s\#]*)([\s\#].*)$/) {
+	    $_ = "$1.$3$4";
+	}
+	if (/^(\s*\#?\s*${f}\s*=\s*(\$\w+|sys\\\$disk:\[)[^\/]*)\/(\w+)([\s\#].*)$/) {
+	    $_ = "$1]$3.$4";
+	} elsif  (/^(\s*\#?\s*${f}\s*=\s*(\$\w+|sys\\\$disk:\[)[^\/]*)\/([^\s\#]*)([\s\#].*)$/) {
+	    $_ = "$1]$3$4";
+	}
+   }
+    print $_,"\n";
+}

VMS/mkshared.com

@@ -266,6 +266,14 @@ $             falsesum = falsesum + 1
 $         endif
 $         if plat_entry .eqs. "VMS" then truesum = truesum + 1
 $         if plat_entry .eqs. "!VMS" then falsesum = falsesum + 1
+$         if f$trnlnm("OPENSSL_FIPS") .nes. ""
+$         then
+$           if plat_entry .eqs. "OPENSSL_FIPS" then truesum = truesum + 1
+$           if plat_entry .eqs. "!OPENSSL_FIPS" then falsesum = falsesum + 1
+$         else
+$           if plat_entry .eqs. "OPENSSL_FIPS" then falsesum = falsesum + 1
+$           if plat_entry .eqs. "!OPENSSL_FIPS" then truesum = truesum + 1
+$         endif
 $	  goto loop1
 $       endif
 $     endloop1:

apps/.cvsignore

@@ -3,3 +3,6 @@ Makefile.save
 der_chop
 der_chop.bak
 CA.pl
+openssl.sha1
+*.flc
+semantic.cache

apps/CA.pl.in

@@ -36,13 +36,21 @@
 # default openssl.cnf file has setup as per the following
 # demoCA ... where everything is stored
 
+my $openssl;
+if(defined $ENV{OPENSSL}) {
+	$openssl = $ENV{OPENSSL};
+} else {
+	$openssl = "openssl";
+	$ENV{OPENSSL} = $openssl;
+}
+
 $SSLEAY_CONFIG=$ENV{"SSLEAY_CONFIG"};
 $DAYS="-days 365";
-$REQ="openssl req $SSLEAY_CONFIG";
-$CA="openssl ca $SSLEAY_CONFIG";
-$VERIFY="openssl verify";
-$X509="openssl x509";
-$PKCS12="openssl pkcs12";
+$REQ="$openssl req $SSLEAY_CONFIG";
+$CA="$openssl ca $SSLEAY_CONFIG";
+$VERIFY="$openssl verify";
+$X509="$openssl x509";
+$PKCS12="$openssl pkcs12";
 
 $CATOP="./demoCA";
 $CAKEY="cakey.pem";
@@ -58,19 +66,19 @@ foreach (@ARGV) {
 	    exit 0;
 	} elsif (/^-newcert$/) {
 	    # create a certificate
-	    system ("$REQ -new -x509 -keyout newreq.pem -out newreq.pem $DAYS");
+	    system ("$REQ -new -x509 -keyout newkey.pem -out newcert.pem $DAYS");
 	    $RET=$?;
-	    print "Certificate (and private key) is in newreq.pem\n"
+	    print "Certificate is in newcert.pem, private key is in newkey.pem\n"
 	} elsif (/^-newreq$/) {
 	    # create a certificate request
-	    system ("$REQ -new -keyout newreq.pem -out newreq.pem $DAYS");
+	    system ("$REQ -new -keyout newkey.pem -out newreq.pem $DAYS");
 	    $RET=$?;
-	    print "Request (and private key) is in newreq.pem\n";
+	    print "Request is in newreq.pem, private key is in newkey.pem\n";
 	} elsif (/^-newreq-nodes$/) {
 	    # create a certificate request
-	    system ("$REQ -new -nodes -keyout newreq.pem -out newreq.pem $DAYS");
+	    system ("$REQ -new -nodes -keyout newkey.pem -out newreq.pem $DAYS");
 	    $RET=$?;
-	    print "Request (and private key) is in newreq.pem\n";
+	    print "Request is in newreq.pem, private key is in newkey.pem\n";
 	} elsif (/^-newca$/) {
 		# if explicitly asked for or it doesn't exist then setup the
 		# directory structure that Eric likes to manage things 
@@ -82,9 +90,6 @@ foreach (@ARGV) {
 		mkdir "${CATOP}/crl", $DIRMODE ;
 		mkdir "${CATOP}/newcerts", $DIRMODE;
 		mkdir "${CATOP}/private", $DIRMODE;
-		open OUT, ">${CATOP}/serial";
-		print OUT "01\n";
-		close OUT;
 		open OUT, ">${CATOP}/index.txt";
 		close OUT;
 	    }
@@ -106,13 +111,18 @@ foreach (@ARGV) {
 		    $RET=$?;
 		}
 	    }
+	    if (! -f "${CATOP}/serial" ) {
+		system ("$X509 -in ${CATOP}/$CACERT -noout "
+			. "-next_serial -out ${CATOP}/serial");
+	    }
 	} elsif (/^-pkcs12$/) {
 	    my $cname = $ARGV[1];
 	    $cname = "My Certificate" unless defined $cname;
-	    system ("$PKCS12 -in newcert.pem -inkey newreq.pem " .
+	    system ("$PKCS12 -in newcert.pem -inkey newkey.pem " .
 			"-certfile ${CATOP}/$CACERT -out newcert.p12 " .
 			"-export -name \"$cname\"");
 	    $RET=$?;
+	    print "PKCS #12 file is in newcert.p12\n";
 	    exit $RET;
 	} elsif (/^-xsign$/) {
 	    system ("$CA -policy policy_anything -infiles newreq.pem");

apps/CA.sh

@@ -30,11 +30,13 @@
 # default openssl.cnf file has setup as per the following
 # demoCA ... where everything is stored
 
+if [ -z "$OPENSSL" ]; then OPENSSL=openssl; fi
+
 DAYS="-days 365"
-REQ="openssl req $SSLEAY_CONFIG"
-CA="openssl ca $SSLEAY_CONFIG"
-VERIFY="openssl verify"
-X509="openssl x509"
+REQ="$OPENSSL req $SSLEAY_CONFIG"
+CA="$OPENSSL ca $SSLEAY_CONFIG"
+VERIFY="$OPENSSL verify"
+X509="$OPENSSL x509"
 
 CATOP=./demoCA
 CAKEY=./cakey.pem
@@ -49,15 +51,15 @@ case $i in
     ;;
 -newcert) 
     # create a certificate
-    $REQ -new -x509 -keyout newreq.pem -out newreq.pem $DAYS
+    $REQ -new -x509 -keyout newkey.pem -out newcert.pem $DAYS
     RET=$?
-    echo "Certificate (and private key) is in newreq.pem"
+    echo "Certificate is in newcert.pem, private key is in newkey.pem"
     ;;
 -newreq) 
     # create a certificate request
-    $REQ -new -keyout newreq.pem -out newreq.pem $DAYS
+    $REQ -new -keyout newkey.pem -out newreq.pem $DAYS
     RET=$?
-    echo "Request (and private key) is in newreq.pem"
+    echo "Request is in newreq.pem, private key is in newkey.pem"
     ;;
 -newca)     
     # if explicitly asked for or it doesn't exist then setup the directory

apps/Makefile

@@ -1,5 +1,5 @@
 #
-#  apps/Makefile.ssl
+#  apps/Makefile
 #
 
 DIR=		apps
@@ -10,10 +10,9 @@ CFLAG=		-g -static
 INSTALL_PREFIX=
 INSTALLTOP=	/usr/local/ssl
 OPENSSLDIR=	/usr/local/ssl
-MAKE=		make -f Makefile.ssl
 MAKEDEPPROG=	makedepend
 MAKEDEPEND=	$(TOP)/util/domd $(TOP) -MD $(MAKEDEPPROG)
-MAKEFILE=	Makefile.ssl
+MAKEFILE=	Makefile
 PERL=		perl
 RM=		rm -f
 # KRB5 stuff
@@ -37,7 +36,7 @@ LIBSSL=-L.. -lssl
 
 PROGRAM= openssl
 
-SCRIPTS=CA.sh CA.pl der_chop
+SCRIPTS=CA.sh CA.pl
 
 EXE= $(PROGRAM)$(EXE_EXT)
 
@@ -45,7 +44,7 @@ E_EXE=	verify asn1pars req dgst dh dhparam enc passwd gendh errstr \
 	ca crl rsa rsautl dsa dsaparam \
 	x509 genrsa gendsa s_server s_client speed \
 	s_time version pkcs7 crl2pkcs7 sess_id ciphers nseq pkcs12 \
-	pkcs8 spkac smime rand engine ocsp
+	pkcs8 spkac smime rand engine ocsp prime
 
 PROGS= $(PROGRAM).c
 
@@ -61,14 +60,14 @@ E_OBJ=	verify.o asn1pars.o req.o dgst.o dh.o dhparam.o enc.o passwd.o gendh.o er
 	rsa.o rsautl.o dsa.o dsaparam.o \
 	x509.o genrsa.o gendsa.o s_server.o s_client.o speed.o \
 	s_time.o $(A_OBJ) $(S_OBJ) $(RAND_OBJ) version.o sess_id.o \
-	ciphers.o nseq.o pkcs12.o pkcs8.o spkac.o smime.o rand.o engine.o ocsp.o
+	ciphers.o nseq.o pkcs12.o pkcs8.o spkac.o smime.o rand.o engine.o ocsp.o prime.o
 
 E_SRC=	verify.c asn1pars.c req.c dgst.c dh.c enc.c passwd.c gendh.c errstr.c ca.c \
 	pkcs7.c crl2p7.c crl.c \
 	rsa.c rsautl.c dsa.c dsaparam.c \
 	x509.c genrsa.c gendsa.c s_server.c s_client.c speed.c \
 	s_time.c $(A_SRC) $(S_SRC) $(RAND_SRC) version.c sess_id.c \
-	ciphers.c nseq.c pkcs12.c pkcs8.c spkac.c smime.c rand.c engine.c ocsp.c
+	ciphers.c nseq.c pkcs12.c pkcs8.c spkac.c smime.c rand.c engine.c ocsp.c prime.c
 
 SRC=$(E_SRC)
 
@@ -84,32 +83,37 @@ top:
 
 all:	exe
 
-exe:	$(PROGRAM)
+exe:	$(EXE)
 
 req: sreq.o $(A_OBJ) $(DLIBCRYPTO)
+	LD_LIBRARY_PATH=..:$$LD_LIBRARY_PATH \
 	$(CC) -o req $(CFLAG) sreq.o $(A_OBJ) $(RAND_OBJ) $(PEX_LIBS) $(LIBCRYPTO) $(EX_LIBS)
 
 sreq.o: req.c 
 	$(CC) -c $(INCLUDES) $(CFLAG) -o sreq.o req.c
 
 files:
-	$(PERL) $(TOP)/util/files.pl Makefile.ssl >> $(TOP)/MINFO
+	$(PERL) $(TOP)/util/files.pl Makefile >> $(TOP)/MINFO
 
 install:
 	@for i in $(EXE); \
 	do  \
 	(echo installing $$i; \
-	 cp $$i $(INSTALL_PREFIX)$(INSTALLTOP)/bin/$$i; \
-	 chmod 755 $(INSTALL_PREFIX)$(INSTALLTOP)/bin/$$i ); \
-	 done;
+	 cp $$i $(INSTALL_PREFIX)$(INSTALLTOP)/bin/$$i.new; \
+	 chmod 755 $(INSTALL_PREFIX)$(INSTALLTOP)/bin/$$i.new; \
+	 mv -f  $(INSTALL_PREFIX)$(INSTALLTOP)/bin/$$i.new \
+	 	$(INSTALL_PREFIX)$(INSTALLTOP)/bin/$$i; \
+	) done;
 	@for i in $(SCRIPTS); \
 	do  \
 	(echo installing $$i; \
-	 cp $$i $(INSTALL_PREFIX)$(OPENSSLDIR)/misc/$$i; \
-	 chmod 755 $(INSTALL_PREFIX)$(OPENSSLDIR)/misc/$$i ); \
+	 cp $$i $(INSTALL_PREFIX)$(OPENSSLDIR)/misc/$$i.new; \
+	 chmod 755 $(INSTALL_PREFIX)$(OPENSSLDIR)/misc/$$i.new; \
+	 mv -f $(INSTALL_PREFIX)$(OPENSSLDIR)/misc/$$i.new $(INSTALL_PREFIX)$(OPENSSLDIR)/misc/$$i ); \
 	 done
-	@cp openssl.cnf $(INSTALL_PREFIX)$(OPENSSLDIR); \
-	chmod 644 $(INSTALL_PREFIX)$(OPENSSLDIR)/openssl.cnf
+	@cp openssl.cnf $(INSTALL_PREFIX)$(OPENSSLDIR)/openssl.cnf.new; \
+	chmod 644 $(INSTALL_PREFIX)$(OPENSSLDIR)/openssl.cnf.new; \
+	mv -f  $(INSTALL_PREFIX)$(OPENSSLDIR)/openssl.cnf.new $(INSTALL_PREFIX)$(OPENSSLDIR)/openssl.cnf
 
 tags:
 	ctags $(SRC)
@@ -117,7 +121,6 @@ tags:
 tests:
 
 links:
-	@$(TOP)/util/point.sh Makefile.ssl Makefile
 
 lint:
 	lint -DLINT $(INCLUDES) $(SRC)>fluff
@@ -139,18 +142,24 @@ $(DLIBSSL):
 $(DLIBCRYPTO):
 	(cd ..; $(MAKE) DIRS=crypto all)
 
-$(PROGRAM): progs.h $(E_OBJ) $(PROGRAM).o $(DLIBCRYPTO) $(DLIBSSL)
-	$(RM) $(PROGRAM)
-	if [ "$(SHLIB_TARGET)" = "hpux-shared" -o "$(SHLIB_TARGET)" = "darwin-shared" ] ; then \
-	  $(CC) -o $(PROGRAM) $(CFLAGS) $(PROGRAM).o $(E_OBJ) $(PEX_LIBS) $(DLIBSSL) $(LIBKRB5) $(DLIBCRYPTO) $(EX_LIBS) ; \
+$(EXE): progs.h $(E_OBJ) $(PROGRAM).o $(DLIBCRYPTO) $(DLIBSSL)
+	$(RM) $(EXE)
+	@if egrep 'define OPENSSL_FIPS' $(TOP)/include/openssl/opensslconf.h > /dev/null; then \
+	  FIPSLD_CC=$(CC); CC=$(TOP)/fips-1.0/fipsld; export CC FIPSLD_CC; \
+	fi; \
+	SHARED_LIBS="$(SHARED_LIBS)"; \
+	if [ "$(SHLIB_TARGET)" = "darwin-shared" ] ; then \
+	  SHARED_LIBS=""; \
+	fi; \
+	if [ -z "$$SHARED_LIBS" ]; then \
+	  set -x; $${CC:-$(CC)} -o $(EXE) $(CFLAGS) $(PROGRAM).o $(E_OBJ) $(PEX_LIBS) $(DLIBSSL) $(LIBKRB5) $(DLIBCRYPTO) $(EX_LIBS) ; \
 	else \
-	  $(CC) -o $(PROGRAM) $(CFLAGS) $(PROGRAM).o $(E_OBJ) $(PEX_LIBS) $(LIBSSL) $(LIBKRB5) $(LIBCRYPTO) $(EX_LIBS) ; \
+	  set -x; LD_LIBRARY_PATH=..:$$LD_LIBRARY_PATH \
+	  $(CC) -o $(EXE) $(CFLAGS) $(PROGRAM).o $(E_OBJ) $(PEX_LIBS) $(LIBSSL) $(LIBKRB5) $(LIBCRYPTO) $(EX_LIBS) ; \
 	fi
-	-(cd ..; OPENSSL="`pwd`/apps/openssl"; export OPENSSL; \
-		LIBPATH="`pwd`"; LD_LIBRARY_PATH="`pwd`"; DYLD_LIBRARY_PATH="`pwd`"; SHLIB_PATH="`pwd`"; \
-		if [ "$(PLATFORM)" != "Cygwin" ]; then PATH="`pwd`:$$PATH"; fi; \
-		export LD_LIBRARY_PATH DYLD_LIBRARY_PATH SHLIB_PATH LIBPATH PATH; \
-		$(PERL) tools/c_rehash certs)
+	-(cd ..; \
+	  OPENSSL="`pwd`/util/opensslwrap.sh"; export OPENSSL; \
+	  $(PERL) tools/c_rehash certs)
 
 progs.h: progs.pl
 	$(PERL) progs.pl $(E_EXE) >progs.h
@@ -336,21 +345,22 @@ dgst.o: ../include/openssl/crypto.h ../include/openssl/des.h
 dgst.o: ../include/openssl/des_old.h ../include/openssl/dh.h
 dgst.o: ../include/openssl/dsa.h ../include/openssl/e_os2.h
 dgst.o: ../include/openssl/engine.h ../include/openssl/err.h
-dgst.o: ../include/openssl/evp.h ../include/openssl/idea.h
-dgst.o: ../include/openssl/lhash.h ../include/openssl/md2.h
-dgst.o: ../include/openssl/md4.h ../include/openssl/md5.h
-dgst.o: ../include/openssl/mdc2.h ../include/openssl/obj_mac.h
-dgst.o: ../include/openssl/objects.h ../include/openssl/opensslconf.h
-dgst.o: ../include/openssl/opensslv.h ../include/openssl/ossl_typ.h
-dgst.o: ../include/openssl/pem.h ../include/openssl/pem2.h
-dgst.o: ../include/openssl/pkcs7.h ../include/openssl/rand.h
-dgst.o: ../include/openssl/rc2.h ../include/openssl/rc4.h
-dgst.o: ../include/openssl/rc5.h ../include/openssl/ripemd.h
-dgst.o: ../include/openssl/rsa.h ../include/openssl/safestack.h
-dgst.o: ../include/openssl/sha.h ../include/openssl/stack.h
-dgst.o: ../include/openssl/symhacks.h ../include/openssl/txt_db.h
-dgst.o: ../include/openssl/ui.h ../include/openssl/ui_compat.h
-dgst.o: ../include/openssl/x509.h ../include/openssl/x509_vfy.h apps.h dgst.c
+dgst.o: ../include/openssl/evp.h ../include/openssl/hmac.h
+dgst.o: ../include/openssl/idea.h ../include/openssl/lhash.h
+dgst.o: ../include/openssl/md2.h ../include/openssl/md4.h
+dgst.o: ../include/openssl/md5.h ../include/openssl/mdc2.h
+dgst.o: ../include/openssl/obj_mac.h ../include/openssl/objects.h
+dgst.o: ../include/openssl/opensslconf.h ../include/openssl/opensslv.h
+dgst.o: ../include/openssl/ossl_typ.h ../include/openssl/pem.h
+dgst.o: ../include/openssl/pem2.h ../include/openssl/pkcs7.h
+dgst.o: ../include/openssl/rand.h ../include/openssl/rc2.h
+dgst.o: ../include/openssl/rc4.h ../include/openssl/rc5.h
+dgst.o: ../include/openssl/ripemd.h ../include/openssl/rsa.h
+dgst.o: ../include/openssl/safestack.h ../include/openssl/sha.h
+dgst.o: ../include/openssl/stack.h ../include/openssl/symhacks.h
+dgst.o: ../include/openssl/txt_db.h ../include/openssl/ui.h
+dgst.o: ../include/openssl/ui_compat.h ../include/openssl/x509.h
+dgst.o: ../include/openssl/x509_vfy.h apps.h dgst.c
 dh.o: ../e_os.h ../include/openssl/aes.h ../include/openssl/asn1.h
 dh.o: ../include/openssl/bio.h ../include/openssl/blowfish.h
 dh.o: ../include/openssl/bn.h ../include/openssl/buffer.h
@@ -629,24 +639,25 @@ openssl.o: ../include/openssl/des.h ../include/openssl/des_old.h
 openssl.o: ../include/openssl/dh.h ../include/openssl/dsa.h
 openssl.o: ../include/openssl/e_os2.h ../include/openssl/engine.h
 openssl.o: ../include/openssl/err.h ../include/openssl/evp.h
-openssl.o: ../include/openssl/idea.h ../include/openssl/kssl.h
-openssl.o: ../include/openssl/lhash.h ../include/openssl/md2.h
-openssl.o: ../include/openssl/md4.h ../include/openssl/md5.h
-openssl.o: ../include/openssl/mdc2.h ../include/openssl/obj_mac.h
-openssl.o: ../include/openssl/objects.h ../include/openssl/opensslconf.h
-openssl.o: ../include/openssl/opensslv.h ../include/openssl/ossl_typ.h
-openssl.o: ../include/openssl/pem.h ../include/openssl/pem2.h
-openssl.o: ../include/openssl/pkcs7.h ../include/openssl/rand.h
-openssl.o: ../include/openssl/rc2.h ../include/openssl/rc4.h
-openssl.o: ../include/openssl/rc5.h ../include/openssl/ripemd.h
-openssl.o: ../include/openssl/rsa.h ../include/openssl/safestack.h
-openssl.o: ../include/openssl/sha.h ../include/openssl/ssl.h
-openssl.o: ../include/openssl/ssl2.h ../include/openssl/ssl23.h
-openssl.o: ../include/openssl/ssl3.h ../include/openssl/stack.h
-openssl.o: ../include/openssl/symhacks.h ../include/openssl/tls1.h
-openssl.o: ../include/openssl/txt_db.h ../include/openssl/ui.h
-openssl.o: ../include/openssl/ui_compat.h ../include/openssl/x509.h
-openssl.o: ../include/openssl/x509_vfy.h apps.h openssl.c progs.h s_apps.h
+openssl.o: ../include/openssl/fips.h ../include/openssl/idea.h
+openssl.o: ../include/openssl/kssl.h ../include/openssl/lhash.h
+openssl.o: ../include/openssl/md2.h ../include/openssl/md4.h
+openssl.o: ../include/openssl/md5.h ../include/openssl/mdc2.h
+openssl.o: ../include/openssl/obj_mac.h ../include/openssl/objects.h
+openssl.o: ../include/openssl/opensslconf.h ../include/openssl/opensslv.h
+openssl.o: ../include/openssl/ossl_typ.h ../include/openssl/pem.h
+openssl.o: ../include/openssl/pem2.h ../include/openssl/pkcs7.h
+openssl.o: ../include/openssl/rand.h ../include/openssl/rc2.h
+openssl.o: ../include/openssl/rc4.h ../include/openssl/rc5.h
+openssl.o: ../include/openssl/ripemd.h ../include/openssl/rsa.h
+openssl.o: ../include/openssl/safestack.h ../include/openssl/sha.h
+openssl.o: ../include/openssl/ssl.h ../include/openssl/ssl2.h
+openssl.o: ../include/openssl/ssl23.h ../include/openssl/ssl3.h
+openssl.o: ../include/openssl/stack.h ../include/openssl/symhacks.h
+openssl.o: ../include/openssl/tls1.h ../include/openssl/txt_db.h
+openssl.o: ../include/openssl/ui.h ../include/openssl/ui_compat.h
+openssl.o: ../include/openssl/x509.h ../include/openssl/x509_vfy.h apps.h
+openssl.o: openssl.c progs.h s_apps.h
 passwd.o: ../e_os.h ../include/openssl/aes.h ../include/openssl/asn1.h
 passwd.o: ../include/openssl/bio.h ../include/openssl/blowfish.h
 passwd.o: ../include/openssl/bn.h ../include/openssl/buffer.h
@@ -741,6 +752,28 @@ pkcs8.o: ../include/openssl/stack.h ../include/openssl/symhacks.h
 pkcs8.o: ../include/openssl/txt_db.h ../include/openssl/ui.h
 pkcs8.o: ../include/openssl/ui_compat.h ../include/openssl/x509.h
 pkcs8.o: ../include/openssl/x509_vfy.h apps.h pkcs8.c
+prime.o: ../e_os.h ../include/openssl/aes.h ../include/openssl/asn1.h
+prime.o: ../include/openssl/bio.h ../include/openssl/blowfish.h
+prime.o: ../include/openssl/bn.h ../include/openssl/buffer.h
+prime.o: ../include/openssl/cast.h ../include/openssl/conf.h
+prime.o: ../include/openssl/crypto.h ../include/openssl/des.h
+prime.o: ../include/openssl/des_old.h ../include/openssl/dh.h
+prime.o: ../include/openssl/dsa.h ../include/openssl/e_os2.h
+prime.o: ../include/openssl/engine.h ../include/openssl/err.h
+prime.o: ../include/openssl/evp.h ../include/openssl/idea.h
+prime.o: ../include/openssl/lhash.h ../include/openssl/md2.h
+prime.o: ../include/openssl/md4.h ../include/openssl/md5.h
+prime.o: ../include/openssl/mdc2.h ../include/openssl/obj_mac.h
+prime.o: ../include/openssl/objects.h ../include/openssl/opensslconf.h
+prime.o: ../include/openssl/opensslv.h ../include/openssl/ossl_typ.h
+prime.o: ../include/openssl/pkcs7.h ../include/openssl/rand.h
+prime.o: ../include/openssl/rc2.h ../include/openssl/rc4.h
+prime.o: ../include/openssl/rc5.h ../include/openssl/ripemd.h
+prime.o: ../include/openssl/rsa.h ../include/openssl/safestack.h
+prime.o: ../include/openssl/sha.h ../include/openssl/stack.h
+prime.o: ../include/openssl/symhacks.h ../include/openssl/txt_db.h
+prime.o: ../include/openssl/ui.h ../include/openssl/ui_compat.h
+prime.o: ../include/openssl/x509.h ../include/openssl/x509_vfy.h apps.h prime.c
 rand.o: ../e_os.h ../include/openssl/aes.h ../include/openssl/asn1.h
 rand.o: ../include/openssl/bio.h ../include/openssl/blowfish.h
 rand.o: ../include/openssl/bn.h ../include/openssl/buffer.h

apps/apps.c

@@ -122,26 +122,14 @@
 #include <openssl/pkcs12.h>
 #include <openssl/ui.h>
 #include <openssl/safestack.h>
+#ifndef OPENSSL_NO_ENGINE
 #include <openssl/engine.h>
-
-#ifdef OPENSSL_SYS_WINDOWS
-#define strcasecmp _stricmp
-#else
-#  ifdef NO_STRINGS_H
-    int	strcasecmp();
-#  else
-#    include <strings.h>
-#  endif /* NO_STRINGS_H */
 #endif
 
 #define NON_MAIN
 #include "apps.h"
 #undef NON_MAIN
 
-#ifdef OPENSSL_SYS_WINDOWS
-#  include "bss_file.c"
-#endif
-
 typedef struct {
 	char *name;
 	unsigned long flag;
@@ -342,60 +330,6 @@ void program_name(char *in, char *out, int size)
 #endif
 #endif
 
-#ifdef OPENSSL_SYS_WIN32
-int WIN32_rename(char *from, char *to)
-	{
-#ifndef OPENSSL_SYS_WINCE
-	/* Windows rename gives an error if 'to' exists, so delete it
-	 * first and ignore file not found errror
-	 */
-	if((remove(to) != 0) && (errno != ENOENT))
-		return -1;
-#undef rename
-	return rename(from, to);
-#else
-	/* convert strings to UNICODE */
-	{
-	BOOL result = FALSE;
-	WCHAR* wfrom;
-	WCHAR* wto;
-	int i;
-	wfrom = malloc((strlen(from)+1)*2);
-	wto = malloc((strlen(to)+1)*2);
-	if (wfrom != NULL && wto != NULL)
-		{
-		for (i=0; i<(int)strlen(from)+1; i++)
-			wfrom[i] = (short)from[i];
-		for (i=0; i<(int)strlen(to)+1; i++)
-			wto[i] = (short)to[i];
-		result = MoveFile(wfrom, wto);
-		}
-	if (wfrom != NULL)
-		free(wfrom);
-	if (wto != NULL)
-		free(wto);
-	return result;
-	}
-#endif
-	}
-#endif
-
-#ifdef OPENSSL_SYS_VMS
-int VMS_strcasecmp(const char *str1, const char *str2)
-	{
-	while (*str1 && *str2)
-		{
-		int res = toupper(*str1) - toupper(*str2);
-		if (res) return res < 0 ? -1 : 1;
-		}
-	if (*str1)
-		return 1;
-	if (*str2)
-		return -1;
-	return 0;
-	}
-#endif
-
 int chopup_args(ARGS *arg, char *buf, int *argc, char **argv[])
 	{
 	int num,len,i;
@@ -427,10 +361,17 @@ int chopup_args(ARGS *arg, char *buf, int *argc, char **argv[])
 		/* The start of something good :-) */
 		if (num >= arg->count)
 			{
-			arg->count+=20;
-			arg->data=(char **)OPENSSL_realloc(arg->data,
-				sizeof(char *)*arg->count);
-			if (argc == 0) return(0);
+			char **tmp_p;
+			int tlen = arg->count + 20;
+			tmp_p = (char **)OPENSSL_realloc(arg->data,
+				sizeof(char *)*tlen);
+			if (tmp_p == NULL)
+				return 0;
+			arg->data  = tmp_p;
+			arg->count = tlen;
+			/* initialize newly allocated data */
+			for (i = num; i < arg->count; i++)
+				arg->data[i] = NULL;
 			}
 		arg->data[num++]=p;
 
@@ -503,7 +444,7 @@ static int ui_read(UI *ui, UI_STRING *uis)
 			{
 			const char *password =
 				((PW_CB_DATA *)UI_get0_user_data(ui))->password;
-			if (password[0] != '\0')
+			if (password && password[0] != '\0')
 				{
 				UI_set_result(ui, uis, password);
 				return 1;
@@ -527,7 +468,7 @@ static int ui_write(UI *ui, UI_STRING *uis)
 			{
 			const char *password =
 				((PW_CB_DATA *)UI_get0_user_data(ui))->password;
-			if (password[0] != '\0')
+			if (password && password[0] != '\0')
 				return 1;
 			}
 		default:
@@ -592,7 +533,7 @@ int password_callback(char *buf, int bufsiz, int verify,
 		char *prompt = NULL;
 
 		prompt = UI_construct_prompt(ui, "pass phrase",
-			cb_data->prompt_info);
+			prompt_info);
 
 		ui_flags |= UI_INPUT_FLAG_DEFAULT_PWD;
 		UI_ctrl(ui, UI_CTRL_PRINT_ERRORS, 1, 0, 0);
@@ -615,7 +556,7 @@ int password_callback(char *buf, int bufsiz, int verify,
 
 		if (buff)
 			{
-			memset(buff,0,(unsigned int)bufsiz);
+			OPENSSL_cleanse(buff,(unsigned int)bufsiz);
 			OPENSSL_free(buff);
 			}
 
@@ -625,13 +566,13 @@ int password_callback(char *buf, int bufsiz, int verify,
 			{
 			BIO_printf(bio_err, "User interface error\n");
 			ERR_print_errors(bio_err);
-			memset(buf,0,(unsigned int)bufsiz);
+			OPENSSL_cleanse(buf,(unsigned int)bufsiz);
 			res = 0;
 			}
 		if (ok == -2)
 			{
 			BIO_printf(bio_err,"aborted!\n");
-			memset(buf,0,(unsigned int)bufsiz);
+			OPENSSL_cleanse(buf,(unsigned int)bufsiz);
 			res = 0;
 			}
 		UI_free(ui);
@@ -741,6 +682,51 @@ int add_oid_section(BIO *err, CONF *conf)
 	return 1;
 }
 
+static int load_pkcs12(BIO *err, BIO *in, const char *desc,
+		pem_password_cb *pem_cb,  void *cb_data,
+		EVP_PKEY **pkey, X509 **cert, STACK_OF(X509) **ca)
+	{
+ 	const char *pass;
+	char tpass[PEM_BUFSIZE];
+	int len, ret = 0;
+	PKCS12 *p12;
+	p12 = d2i_PKCS12_bio(in, NULL);
+	if (p12 == NULL)
+		{
+		BIO_printf(err, "Error loading PKCS12 file for %s\n", desc);	
+		goto die;
+		}
+	/* See if an empty password will do */
+	if (PKCS12_verify_mac(p12, "", 0) || PKCS12_verify_mac(p12, NULL, 0))
+		pass = "";
+	else
+		{
+		if (!pem_cb)
+			pem_cb = (pem_password_cb *)password_callback;
+		len = pem_cb(tpass, PEM_BUFSIZE, 0, cb_data);
+		if (len < 0) 
+			{
+			BIO_printf(err, "Passpharse callback error for %s\n",
+					desc);
+			goto die;
+			}
+		if (len < PEM_BUFSIZE)
+			tpass[len] = 0;
+		if (!PKCS12_verify_mac(p12, tpass, len))
+			{
+			BIO_printf(err,
+	"Mac verify error (wrong password?) in PKCS12 file for %s\n", desc);	
+			goto die;
+			}
+		pass = tpass;
+		}
+	ret = PKCS12_parse(p12, pass, pkey, cert, ca);
+	die:
+	if (p12)
+		PKCS12_free(p12);
+	return ret;
+	}
+
 X509 *load_cert(BIO *err, const char *file, int format,
 	const char *pass, ENGINE *e, const char *cert_descrip)
 	{
@@ -821,11 +807,9 @@ X509 *load_cert(BIO *err, const char *file, int format,
 			(pem_password_cb *)password_callback, NULL);
 	else if (format == FORMAT_PKCS12)
 		{
-		PKCS12 *p12 = d2i_PKCS12_bio(cert, NULL);
-
-		PKCS12_parse(p12, NULL, NULL, &x, NULL);
-		PKCS12_free(p12);
-		p12 = NULL;
+		if (!load_pkcs12(err, cert,cert_descrip, NULL, NULL,
+					NULL, &x, NULL))
+			goto end;
 		}
 	else	{
 		BIO_printf(err,"bad input format specified for %s\n",
@@ -859,6 +843,7 @@ EVP_PKEY *load_key(BIO *err, const char *file, int format, int maybe_stdin,
 		BIO_printf(err,"no keyfile specified\n");
 		goto end;
 		}
+#ifndef OPENSSL_NO_ENGINE
 	if (format == FORMAT_ENGINE)
 		{
 		if (!e)
@@ -868,6 +853,7 @@ EVP_PKEY *load_key(BIO *err, const char *file, int format, int maybe_stdin,
 				ui_method, &cb_data);
 		goto end;
 		}
+#endif
 	key=BIO_new(BIO_s_file());
 	if (key == NULL)
 		{
@@ -902,11 +888,10 @@ EVP_PKEY *load_key(BIO *err, const char *file, int format, int maybe_stdin,
 #endif
 	else if (format == FORMAT_PKCS12)
 		{
-		PKCS12 *p12 = d2i_PKCS12_bio(key, NULL);
-
-		PKCS12_parse(p12, pass, &pkey, NULL, NULL);
-		PKCS12_free(p12);
-		p12 = NULL;
+		if (!load_pkcs12(err, key, key_descrip,
+				(pem_password_cb *)password_callback, &cb_data,
+				&pkey, NULL, NULL))
+			goto end;
 		}
 	else
 		{
@@ -935,6 +920,7 @@ EVP_PKEY *load_pubkey(BIO *err, const char *file, int format, int maybe_stdin,
 		BIO_printf(err,"no keyfile specified\n");
 		goto end;
 		}
+#ifndef OPENSSL_NO_ENGINE
 	if (format == FORMAT_ENGINE)
 		{
 		if (!e)
@@ -944,6 +930,7 @@ EVP_PKEY *load_pubkey(BIO *err, const char *file, int format, int maybe_stdin,
 				ui_method, &cb_data);
 		goto end;
 		}
+#endif
 	key=BIO_new(BIO_s_file());
 	if (key == NULL)
 		{
@@ -1329,6 +1316,7 @@ X509_STORE *setup_verify(BIO *bp, char *CAfile, char *CApath)
 	return NULL;
 }
 
+#ifndef OPENSSL_NO_ENGINE
 /* Try to load an engine in a shareable library */
 static ENGINE *try_load_engine(BIO *err, const char *engine, int debug)
 	{
@@ -1385,6 +1373,7 @@ ENGINE *setup_engine(BIO *err, const char *engine, int debug)
 		}
         return e;
         }
+#endif
 
 int load_config(BIO *err, CONF *cnf)
 	{
@@ -1407,14 +1396,634 @@ int load_config(BIO *err, CONF *cnf)
 char *make_config_name()
 	{
 	const char *t=X509_get_default_cert_area();
+	size_t len;
 	char *p;
 
-	p=OPENSSL_malloc(strlen(t)+strlen(OPENSSL_CONF)+2);
-	strcpy(p,t);
+	len=strlen(t)+strlen(OPENSSL_CONF)+2;
+	p=OPENSSL_malloc(len);
+	BUF_strlcpy(p,t,len);
 #ifndef OPENSSL_SYS_VMS
-	strcat(p,"/");
+	BUF_strlcat(p,"/",len);
 #endif
-	strcat(p,OPENSSL_CONF);
+	BUF_strlcat(p,OPENSSL_CONF,len);
 
 	return p;
 	}
+
+static unsigned long index_serial_hash(const char **a)
+	{
+	const char *n;
+
+	n=a[DB_serial];
+	while (*n == '0') n++;
+	return(lh_strhash(n));
+	}
+
+static int index_serial_cmp(const char **a, const char **b)
+	{
+	const char *aa,*bb;
+
+	for (aa=a[DB_serial]; *aa == '0'; aa++);
+	for (bb=b[DB_serial]; *bb == '0'; bb++);
+	return(strcmp(aa,bb));
+	}
+
+static int index_name_qual(char **a)
+	{ return(a[0][0] == 'V'); }
+
+static unsigned long index_name_hash(const char **a)
+	{ return(lh_strhash(a[DB_name])); }
+
+int index_name_cmp(const char **a, const char **b)
+	{ return(strcmp(a[DB_name],
+	     b[DB_name])); }
+
+static IMPLEMENT_LHASH_HASH_FN(index_serial_hash,const char **)
+static IMPLEMENT_LHASH_COMP_FN(index_serial_cmp,const char **)
+static IMPLEMENT_LHASH_HASH_FN(index_name_hash,const char **)
+static IMPLEMENT_LHASH_COMP_FN(index_name_cmp,const char **)
+
+#undef BSIZE
+#define BSIZE 256
+
+BIGNUM *load_serial(char *serialfile, int create, ASN1_INTEGER **retai)
+	{
+	BIO *in=NULL;
+	BIGNUM *ret=NULL;
+	MS_STATIC char buf[1024];
+	ASN1_INTEGER *ai=NULL;
+
+	ai=ASN1_INTEGER_new();
+	if (ai == NULL) goto err;
+
+	if ((in=BIO_new(BIO_s_file())) == NULL)
+		{
+		ERR_print_errors(bio_err);
+		goto err;
+		}
+
+	if (BIO_read_filename(in,serialfile) <= 0)
+		{
+		if (!create)
+			{
+			perror(serialfile);
+			goto err;
+			}
+		else
+			{
+			ret=BN_new();
+			if (ret == NULL || !rand_serial(ret, ai))
+				BIO_printf(bio_err, "Out of memory\n");
+			}
+		}
+	else
+		{
+		if (!a2i_ASN1_INTEGER(in,ai,buf,1024))
+			{
+			BIO_printf(bio_err,"unable to load number from %s\n",
+				serialfile);
+			goto err;
+			}
+		ret=ASN1_INTEGER_to_BN(ai,NULL);
+		if (ret == NULL)
+			{
+			BIO_printf(bio_err,"error converting number from bin to BIGNUM\n");
+			goto err;
+			}
+		}
+
+	if (ret && retai)
+		{
+		*retai = ai;
+		ai = NULL;
+		}
+ err:
+	if (in != NULL) BIO_free(in);
+	if (ai != NULL) ASN1_INTEGER_free(ai);
+	return(ret);
+	}
+
+int save_serial(char *serialfile, char *suffix, BIGNUM *serial, ASN1_INTEGER **retai)
+	{
+	char buf[1][BSIZE];
+	BIO *out = NULL;
+	int ret=0;
+	ASN1_INTEGER *ai=NULL;
+	int j;
+
+	if (suffix == NULL)
+		j = strlen(serialfile);
+	else
+		j = strlen(serialfile) + strlen(suffix) + 1;
+	if (j >= BSIZE)
+		{
+		BIO_printf(bio_err,"file name too long\n");
+		goto err;
+		}
+
+	if (suffix == NULL)
+		BUF_strlcpy(buf[0], serialfile, BSIZE);
+	else
+		{
+#ifndef OPENSSL_SYS_VMS
+		j = BIO_snprintf(buf[0], sizeof buf[0], "%s.%s", serialfile, suffix);
+#else
+		j = BIO_snprintf(buf[0], sizeof buf[0], "%s-%s", serialfile, suffix);
+#endif
+		}
+#ifdef RL_DEBUG
+	BIO_printf(bio_err, "DEBUG: writing \"%s\"\n", buf[0]);
+#endif
+	out=BIO_new(BIO_s_file());
+	if (out == NULL)
+		{
+		ERR_print_errors(bio_err);
+		goto err;
+		}
+	if (BIO_write_filename(out,buf[0]) <= 0)
+		{
+		perror(serialfile);
+		goto err;
+		}
+
+	if ((ai=BN_to_ASN1_INTEGER(serial,NULL)) == NULL)
+		{
+		BIO_printf(bio_err,"error converting serial to ASN.1 format\n");
+		goto err;
+		}
+	i2a_ASN1_INTEGER(out,ai);
+	BIO_puts(out,"\n");
+	ret=1;
+	if (retai)
+		{
+		*retai = ai;
+		ai = NULL;
+		}
+err:
+	if (out != NULL) BIO_free_all(out);
+	if (ai != NULL) ASN1_INTEGER_free(ai);
+	return(ret);
+	}
+
+int rotate_serial(char *serialfile, char *new_suffix, char *old_suffix)
+	{
+	char buf[5][BSIZE];
+	int i,j;
+	struct stat sb;
+
+	i = strlen(serialfile) + strlen(old_suffix);
+	j = strlen(serialfile) + strlen(new_suffix);
+	if (i > j) j = i;
+	if (j + 1 >= BSIZE)
+		{
+		BIO_printf(bio_err,"file name too long\n");
+		goto err;
+		}
+
+#ifndef OPENSSL_SYS_VMS
+	j = BIO_snprintf(buf[0], sizeof buf[0], "%s.%s",
+		serialfile, new_suffix);
+#else
+	j = BIO_snprintf(buf[0], sizeof buf[0], "%s-%s",
+		serialfile, new_suffix);
+#endif
+#ifndef OPENSSL_SYS_VMS
+	j = BIO_snprintf(buf[1], sizeof buf[1], "%s.%s",
+		serialfile, old_suffix);
+#else
+	j = BIO_snprintf(buf[1], sizeof buf[1], "%s-%s",
+		serialfile, old_suffix);
+#endif
+	if (stat(serialfile,&sb) < 0)
+		{
+		if (errno != ENOENT 
+#ifdef ENOTDIR
+			&& errno != ENOTDIR
+#endif
+		   )
+			goto err;
+		}
+	else
+		{
+#ifdef RL_DEBUG
+		BIO_printf(bio_err, "DEBUG: renaming \"%s\" to \"%s\"\n",
+			serialfile, buf[1]);
+#endif
+		if (rename(serialfile,buf[1]) < 0)
+			{
+			BIO_printf(bio_err,
+				"unable to rename %s to %s\n",
+				serialfile, buf[1]);
+			perror("reason");
+			goto err;
+			}
+		}
+#ifdef RL_DEBUG
+	BIO_printf(bio_err, "DEBUG: renaming \"%s\" to \"%s\"\n",
+		buf[0],serialfile);
+#endif
+	if (rename(buf[0],serialfile) < 0)
+		{
+		BIO_printf(bio_err,
+			"unable to rename %s to %s\n",
+			buf[0],serialfile);
+		perror("reason");
+		rename(buf[1],serialfile);
+		goto err;
+		}
+	return 1;
+ err:
+	return 0;
+	}
+
+int rand_serial(BIGNUM *b, ASN1_INTEGER *ai)
+	{
+	BIGNUM *btmp;
+	int ret = 0;
+	if (b)
+		btmp = b;
+	else
+		btmp = BN_new();
+
+	if (!btmp)
+		return 0;
+
+	if (!BN_pseudo_rand(btmp, SERIAL_RAND_BITS, 0, 0))
+		goto error;
+	if (ai && !BN_to_ASN1_INTEGER(btmp, ai))
+		goto error;
+
+	ret = 1;
+	
+	error:
+
+	if (!b)
+		BN_free(btmp);
+	
+	return ret;
+	}
+
+CA_DB *load_index(char *dbfile, DB_ATTR *db_attr)
+	{
+	CA_DB *retdb = NULL;
+	TXT_DB *tmpdb = NULL;
+	BIO *in = BIO_new(BIO_s_file());
+	CONF *dbattr_conf = NULL;
+	char buf[1][BSIZE];
+	long errorline= -1;
+
+	if (in == NULL)
+		{
+		ERR_print_errors(bio_err);
+		goto err;
+		}
+	if (BIO_read_filename(in,dbfile) <= 0)
+		{
+		perror(dbfile);
+		BIO_printf(bio_err,"unable to open '%s'\n",dbfile);
+		goto err;
+		}
+	if ((tmpdb = TXT_DB_read(in,DB_NUMBER)) == NULL)
+		{
+		if (tmpdb != NULL) TXT_DB_free(tmpdb);
+		goto err;
+		}
+
+#ifndef OPENSSL_SYS_VMS
+	BIO_snprintf(buf[0], sizeof buf[0], "%s.attr", dbfile);
+#else
+	BIO_snprintf(buf[0], sizeof buf[0], "%s-attr", dbfile);
+#endif
+	dbattr_conf = NCONF_new(NULL);
+	if (NCONF_load(dbattr_conf,buf[0],&errorline) <= 0)
+		{
+		if (errorline > 0)
+			{
+			BIO_printf(bio_err,
+				"error on line %ld of db attribute file '%s'\n"
+				,errorline,buf[0]);
+			goto err;
+			}
+		else
+			{
+			NCONF_free(dbattr_conf);
+			dbattr_conf = NULL;
+			}
+		}
+
+	if ((retdb = OPENSSL_malloc(sizeof(CA_DB))) == NULL)
+		{
+		fprintf(stderr, "Out of memory\n");
+		goto err;
+		}
+
+	retdb->db = tmpdb;
+	tmpdb = NULL;
+	if (db_attr)
+		retdb->attributes = *db_attr;
+	else
+		{
+		retdb->attributes.unique_subject = 1;
+		}
+
+	if (dbattr_conf)
+		{
+		char *p = NCONF_get_string(dbattr_conf,NULL,"unique_subject");
+		if (p)
+			{
+			BIO_printf(bio_err, "DEBUG[load_index]: unique_subject = \"%s\"\n", p);
+			switch(*p)
+				{
+			case 'f': /* false */
+			case 'F': /* FALSE */
+			case 'n': /* no */
+			case 'N': /* NO */
+				retdb->attributes.unique_subject = 0;
+				break;
+			case 't': /* true */
+			case 'T': /* TRUE */
+			case 'y': /* yes */
+			case 'Y': /* YES */
+			default:
+				retdb->attributes.unique_subject = 1;
+				break;
+				}
+			}
+		}
+
+ err:
+	if (dbattr_conf) NCONF_free(dbattr_conf);
+	if (tmpdb) TXT_DB_free(tmpdb);
+	if (in) BIO_free_all(in);
+	return retdb;
+	}
+
+int index_index(CA_DB *db)
+	{
+	if (!TXT_DB_create_index(db->db, DB_serial, NULL,
+				LHASH_HASH_FN(index_serial_hash),
+				LHASH_COMP_FN(index_serial_cmp)))
+		{
+		BIO_printf(bio_err,
+		  "error creating serial number index:(%ld,%ld,%ld)\n",
+		  			db->db->error,db->db->arg1,db->db->arg2);
+			return 0;
+		}
+
+	if (db->attributes.unique_subject
+		&& !TXT_DB_create_index(db->db, DB_name, index_name_qual,
+			LHASH_HASH_FN(index_name_hash),
+			LHASH_COMP_FN(index_name_cmp)))
+		{
+		BIO_printf(bio_err,"error creating name index:(%ld,%ld,%ld)\n",
+			db->db->error,db->db->arg1,db->db->arg2);
+		return 0;
+		}
+	return 1;
+	}
+
+int save_index(char *dbfile, char *suffix, CA_DB *db)
+	{
+	char buf[3][BSIZE];
+	BIO *out = BIO_new(BIO_s_file());
+	int j;
+
+	if (out == NULL)
+		{
+		ERR_print_errors(bio_err);
+		goto err;
+		}
+
+	j = strlen(dbfile) + strlen(suffix);
+	if (j + 6 >= BSIZE)
+		{
+		BIO_printf(bio_err,"file name too long\n");
+		goto err;
+		}
+
+#ifndef OPENSSL_SYS_VMS
+	j = BIO_snprintf(buf[2], sizeof buf[2], "%s.attr", dbfile);
+#else
+	j = BIO_snprintf(buf[2], sizeof buf[2], "%s-attr", dbfile);
+#endif
+#ifndef OPENSSL_SYS_VMS
+	j = BIO_snprintf(buf[1], sizeof buf[1], "%s.attr.%s", dbfile, suffix);
+#else
+	j = BIO_snprintf(buf[1], sizeof buf[1], "%s-attr-%s", dbfile, suffix);
+#endif
+#ifndef OPENSSL_SYS_VMS
+	j = BIO_snprintf(buf[0], sizeof buf[0], "%s.%s", dbfile, suffix);
+#else
+	j = BIO_snprintf(buf[0], sizeof buf[0], "%s-%s", dbfile, suffix);
+#endif
+#ifdef RL_DEBUG
+	BIO_printf(bio_err, "DEBUG: writing \"%s\"\n", buf[0]);
+#endif
+	if (BIO_write_filename(out,buf[0]) <= 0)
+		{
+		perror(dbfile);
+		BIO_printf(bio_err,"unable to open '%s'\n", dbfile);
+		goto err;
+		}
+	j=TXT_DB_write(out,db->db);
+	if (j <= 0) goto err;
+			
+	BIO_free(out);
+
+	out = BIO_new(BIO_s_file());
+#ifdef RL_DEBUG
+	BIO_printf(bio_err, "DEBUG: writing \"%s\"\n", buf[1]);
+#endif
+	if (BIO_write_filename(out,buf[1]) <= 0)
+		{
+		perror(buf[2]);
+		BIO_printf(bio_err,"unable to open '%s'\n", buf[2]);
+		goto err;
+		}
+	BIO_printf(out,"unique_subject = %s\n",
+		db->attributes.unique_subject ? "yes" : "no");
+	BIO_free(out);
+
+	return 1;
+ err:
+	return 0;
+	}
+
+int rotate_index(char *dbfile, char *new_suffix, char *old_suffix)
+	{
+	char buf[5][BSIZE];
+	int i,j;
+	struct stat sb;
+
+	i = strlen(dbfile) + strlen(old_suffix);
+	j = strlen(dbfile) + strlen(new_suffix);
+	if (i > j) j = i;
+	if (j + 6 >= BSIZE)
+		{
+		BIO_printf(bio_err,"file name too long\n");
+		goto err;
+		}
+
+#ifndef OPENSSL_SYS_VMS
+	j = BIO_snprintf(buf[4], sizeof buf[4], "%s.attr", dbfile);
+#else
+	j = BIO_snprintf(buf[4], sizeof buf[4], "%s-attr", dbfile);
+#endif
+#ifndef OPENSSL_SYS_VMS
+	j = BIO_snprintf(buf[2], sizeof buf[2], "%s.attr.%s",
+		dbfile, new_suffix);
+#else
+	j = BIO_snprintf(buf[2], sizeof buf[2], "%s-attr-%s",
+		dbfile, new_suffix);
+#endif
+#ifndef OPENSSL_SYS_VMS
+	j = BIO_snprintf(buf[0], sizeof buf[0], "%s.%s",
+		dbfile, new_suffix);
+#else
+	j = BIO_snprintf(buf[0], sizeof buf[0], "%s-%s",
+		dbfile, new_suffix);
+#endif
+#ifndef OPENSSL_SYS_VMS
+	j = BIO_snprintf(buf[1], sizeof buf[1], "%s.%s",
+		dbfile, old_suffix);
+#else
+	j = BIO_snprintf(buf[1], sizeof buf[1], "%s-%s",
+		dbfile, old_suffix);
+#endif
+#ifndef OPENSSL_SYS_VMS
+	j = BIO_snprintf(buf[3], sizeof buf[3], "%s.attr.%s",
+		dbfile, old_suffix);
+#else
+	j = BIO_snprintf(buf[3], sizeof buf[3], "%s-attr-%s",
+		dbfile, old_suffix);
+#endif
+	if (stat(dbfile,&sb) < 0)
+		{
+		if (errno != ENOENT 
+#ifdef ENOTDIR
+			&& errno != ENOTDIR
+#endif
+		   )
+			goto err;
+		}
+	else
+		{
+#ifdef RL_DEBUG
+		BIO_printf(bio_err, "DEBUG: renaming \"%s\" to \"%s\"\n",
+			dbfile, buf[1]);
+#endif
+		if (rename(dbfile,buf[1]) < 0)
+			{
+			BIO_printf(bio_err,
+				"unable to rename %s to %s\n",
+				dbfile, buf[1]);
+			perror("reason");
+			goto err;
+			}
+		}
+#ifdef RL_DEBUG
+	BIO_printf(bio_err, "DEBUG: renaming \"%s\" to \"%s\"\n",
+		buf[0],dbfile);
+#endif
+	if (rename(buf[0],dbfile) < 0)
+		{
+		BIO_printf(bio_err,
+			"unable to rename %s to %s\n",
+			buf[0],dbfile);
+		perror("reason");
+		rename(buf[1],dbfile);
+		goto err;
+		}
+	if (stat(buf[4],&sb) < 0)
+		{
+		if (errno != ENOENT 
+#ifdef ENOTDIR
+			&& errno != ENOTDIR
+#endif
+		   )
+			goto err;
+		}
+	else
+		{
+#ifdef RL_DEBUG
+		BIO_printf(bio_err, "DEBUG: renaming \"%s\" to \"%s\"\n",
+			buf[4],buf[3]);
+#endif
+		if (rename(buf[4],buf[3]) < 0)
+			{
+			BIO_printf(bio_err,
+				"unable to rename %s to %s\n",
+				buf[4], buf[3]);
+			perror("reason");
+			rename(dbfile,buf[0]);
+			rename(buf[1],dbfile);
+			goto err;
+			}
+		}
+#ifdef RL_DEBUG
+	BIO_printf(bio_err, "DEBUG: renaming \"%s\" to \"%s\"\n",
+		buf[2],buf[4]);
+#endif
+	if (rename(buf[2],buf[4]) < 0)
+		{
+		BIO_printf(bio_err,
+			"unable to rename %s to %s\n",
+			buf[2],buf[4]);
+		perror("reason");
+		rename(buf[3],buf[4]);
+		rename(dbfile,buf[0]);
+		rename(buf[1],dbfile);
+		goto err;
+		}
+	return 1;
+ err:
+	return 0;
+	}
+
+void free_index(CA_DB *db)
+	{
+	if (db)
+		{
+		if (db->db) TXT_DB_free(db->db);
+		OPENSSL_free(db);
+		}
+	}
+
+/* This code MUST COME AFTER anything that uses rename() */
+#ifdef OPENSSL_SYS_WIN32
+int WIN32_rename(char *from, char *to)
+	{
+#ifndef OPENSSL_SYS_WINCE
+	/* Windows rename gives an error if 'to' exists, so delete it
+	 * first and ignore file not found errror
+	 */
+	if((remove(to) != 0) && (errno != ENOENT))
+		return -1;
+#undef rename
+	return rename(from, to);
+#else
+	/* convert strings to UNICODE */
+	{
+	BOOL result = FALSE;
+	WCHAR* wfrom;
+	WCHAR* wto;
+	int i;
+	wfrom = malloc((strlen(from)+1)*2);
+	wto = malloc((strlen(to)+1)*2);
+	if (wfrom != NULL && wto != NULL)
+		{
+		for (i=0; i<(int)strlen(from)+1; i++)
+			wfrom[i] = (short)from[i];
+		for (i=0; i<(int)strlen(to)+1; i++)
+			wto[i] = (short)to[i];
+		result = MoveFile(wfrom, wto);
+		}
+	if (wfrom != NULL)
+		free(wfrom);
+	if (wto != NULL)
+		free(wto);
+	return result;
+	}
+#endif
+	}
+#endif

apps/apps.h

@@ -121,7 +121,9 @@
 #include <openssl/lhash.h>
 #include <openssl/conf.h>
 #include <openssl/txt_db.h>
+#ifndef OPENSSL_NO_ENGINE
 #include <openssl/engine.h>
+#endif
 #include <openssl/ossl_typ.h>
 
 int app_RAND_load_file(const char *file, BIO *bio_e, int dont_warn);
@@ -139,12 +141,6 @@ long app_RAND_load_files(char *file); /* `file' is a list of files to read,
 int WIN32_rename(char *oldname,char *newname);
 #endif
 
-/* VMS below version 7.0 doesn't have strcasecmp() */
-#ifdef OPENSSL_SYS_VMS
-#define strcasecmp(str1,str2) VMS_strcasecmp((str1),(str2))
-int VMS_strcasecmp(const char *str1, const char *str2);
-#endif
-
 #ifndef MONOLITH
 
 #define MAIN(a,v)	main(a,v)
@@ -152,9 +148,11 @@ int VMS_strcasecmp(const char *str1, const char *str2);
 #ifndef NON_MAIN
 CONF *config=NULL;
 BIO *bio_err=NULL;
+int in_FIPS_mode=0;
 #else
 extern CONF *config;
 extern BIO *bio_err;
+extern int in_FIPS_mode;
 #endif
 
 #else
@@ -163,6 +161,7 @@ extern BIO *bio_err;
 extern CONF *config;
 extern char *default_config_file;
 extern BIO *bio_err;
+extern int in_FIPS_mode;
 
 #endif
 
@@ -179,30 +178,57 @@ extern BIO *bio_err;
 		do_pipe_sig()
 #  define apps_shutdown()
 #else
-#  if defined(OPENSSL_SYS_MSDOS) || defined(OPENSSL_SYS_WIN16) || \
-   defined(OPENSSL_SYS_WIN32)
-#    ifdef _O_BINARY
-#      define apps_startup() \
-		do { _fmode=_O_BINARY; do_pipe_sig(); CRYPTO_malloc_init(); \
-		ERR_load_crypto_strings(); OpenSSL_add_all_algorithms(); \
-		ENGINE_load_builtin_engines(); setup_ui_method(); } while(0)
+#  ifndef OPENSSL_NO_ENGINE
+#    if defined(OPENSSL_SYS_MSDOS) || defined(OPENSSL_SYS_WIN16) || \
+     defined(OPENSSL_SYS_WIN32)
+#      ifdef _O_BINARY
+#        define apps_startup() \
+			do { _fmode=_O_BINARY; do_pipe_sig(); CRYPTO_malloc_init(); \
+			ERR_load_crypto_strings(); OpenSSL_add_all_algorithms(); \
+			ENGINE_load_builtin_engines(); setup_ui_method(); } while(0)
+#      else
+#        define apps_startup() \
+			do { _fmode=O_BINARY; do_pipe_sig(); CRYPTO_malloc_init(); \
+			ERR_load_crypto_strings(); OpenSSL_add_all_algorithms(); \
+			ENGINE_load_builtin_engines(); setup_ui_method(); } while(0)
+#      endif
 #    else
 #      define apps_startup() \
-		do { _fmode=O_BINARY; do_pipe_sig(); CRYPTO_malloc_init(); \
-		ERR_load_crypto_strings(); OpenSSL_add_all_algorithms(); \
-		ENGINE_load_builtin_engines(); setup_ui_method(); } while(0)
+			do { do_pipe_sig(); OpenSSL_add_all_algorithms(); \
+			ERR_load_crypto_strings(); ENGINE_load_builtin_engines(); \
+			setup_ui_method(); } while(0)
 #    endif
+#    define apps_shutdown() \
+			do { CONF_modules_unload(1); destroy_ui_method(); \
+			EVP_cleanup(); ENGINE_cleanup(); \
+			CRYPTO_cleanup_all_ex_data(); ERR_remove_state(0); \
+			ERR_free_strings(); } while(0)
 #  else
-#    define apps_startup() \
-		do { do_pipe_sig(); OpenSSL_add_all_algorithms(); \
-		ERR_load_crypto_strings(); ENGINE_load_builtin_engines(); \
-		setup_ui_method(); } while(0)
+#    if defined(OPENSSL_SYS_MSDOS) || defined(OPENSSL_SYS_WIN16) || \
+     defined(OPENSSL_SYS_WIN32)
+#      ifdef _O_BINARY
+#        define apps_startup() \
+			do { _fmode=_O_BINARY; do_pipe_sig(); CRYPTO_malloc_init(); \
+			ERR_load_crypto_strings(); OpenSSL_add_all_algorithms(); \
+			setup_ui_method(); } while(0)
+#      else
+#        define apps_startup() \
+			do { _fmode=O_BINARY; do_pipe_sig(); CRYPTO_malloc_init(); \
+			ERR_load_crypto_strings(); OpenSSL_add_all_algorithms(); \
+			setup_ui_method(); } while(0)
+#      endif
+#    else
+#      define apps_startup() \
+			do { do_pipe_sig(); OpenSSL_add_all_algorithms(); \
+			ERR_load_crypto_strings(); \
+			setup_ui_method(); } while(0)
+#    endif
+#    define apps_shutdown() \
+			do { CONF_modules_unload(1); destroy_ui_method(); \
+			EVP_cleanup(); \
+			CRYPTO_cleanup_all_ex_data(); ERR_remove_state(0); \
+			ERR_free_strings(); } while(0)
 #  endif
-#  define apps_shutdown() \
-		do { CONF_modules_unload(1); destroy_ui_method(); \
-		EVP_cleanup(); ENGINE_cleanup(); \
-		CRYPTO_cleanup_all_ex_data(); ERR_remove_state(0); \
-		ERR_free_strings(); } while(0)
 #endif
 
 typedef struct args_st
@@ -248,7 +274,9 @@ EVP_PKEY *load_pubkey(BIO *err, const char *file, int format, int maybe_stdin,
 STACK_OF(X509) *load_certs(BIO *err, const char *file, int format,
 	const char *pass, ENGINE *e, const char *cert_descrip);
 X509_STORE *setup_verify(BIO *bp, char *CAfile, char *CApath);
+#ifndef OPENSSL_NO_ENGINE
 ENGINE *setup_engine(BIO *err, const char *engine, int debug);
+#endif
 
 int load_config(BIO *err, CONF *cnf);
 char *make_config_name(void);
@@ -256,7 +284,39 @@ char *make_config_name(void);
 /* Functions defined in ca.c and also used in ocsp.c */
 int unpack_revinfo(ASN1_TIME **prevtm, int *preason, ASN1_OBJECT **phold,
 			ASN1_GENERALIZEDTIME **pinvtm, char *str);
-int make_serial_index(TXT_DB *db);
+
+#define DB_type         0
+#define DB_exp_date     1
+#define DB_rev_date     2
+#define DB_serial       3       /* index - unique */
+#define DB_file         4       
+#define DB_name         5       /* index - unique when active and not disabled */
+#define DB_NUMBER       6
+
+#define DB_TYPE_REV	'R'
+#define DB_TYPE_EXP	'E'
+#define DB_TYPE_VAL	'V'
+
+typedef struct db_attr_st
+	{
+	int unique_subject;
+	} DB_ATTR;
+typedef struct ca_db_st
+	{
+	DB_ATTR attributes;
+	TXT_DB *db;
+	} CA_DB;
+
+BIGNUM *load_serial(char *serialfile, int create, ASN1_INTEGER **retai);
+int save_serial(char *serialfile, char *suffix, BIGNUM *serial, ASN1_INTEGER **retai);
+int rotate_serial(char *serialfile, char *new_suffix, char *old_suffix);
+int rand_serial(BIGNUM *b, ASN1_INTEGER *ai);
+CA_DB *load_index(char *dbfile, DB_ATTR *dbattr);
+int index_index(CA_DB *db);
+int save_index(char *dbfile, char *suffix, CA_DB *db);
+int rotate_index(char *dbfile, char *new_suffix, char *old_suffix);
+void free_index(CA_DB *db);
+int index_name_cmp(const char **a, const char **b);
 
 X509_NAME *do_subject(char *str, long chtype);
 
@@ -279,4 +339,6 @@ X509_NAME *do_subject(char *str, long chtype);
 
 #define APP_PASS_LEN	1024
 
+#define SERIAL_RAND_BITS	64
+
 #endif

apps/asn1pars.c

@@ -182,7 +182,7 @@ int MAIN(int argc, char **argv)
 bad:
 		BIO_printf(bio_err,"%s [options] <infile\n",prog);
 		BIO_printf(bio_err,"where options are\n");
-		BIO_printf(bio_err," -inform arg   input format - one of DER TXT PEM\n");
+		BIO_printf(bio_err," -inform arg   input format - one of DER PEM\n");
 		BIO_printf(bio_err," -in arg       input file\n");
 		BIO_printf(bio_err," -out arg      output file (output format is always DER\n");
 		BIO_printf(bio_err," -noout arg    don't produce any output\n");
@@ -278,6 +278,7 @@ bad:
 		tmplen=num;
 		for (i=0; i<sk_num(osk); i++)
 			{
+			int typ;
 			ASN1_TYPE *atmp;
 			j=atoi(sk_value(osk,i));
 			if (j == 0)
@@ -296,6 +297,15 @@ bad:
 				ERR_print_errors(bio_err);
 				goto end;
 				}
+			typ = ASN1_TYPE_get(at);
+			if ((typ == V_ASN1_OBJECT)
+				|| (typ == V_ASN1_NULL))
+				{
+				BIO_printf(bio_err, "Can't parse %s type\n",
+					typ == V_ASN1_NULL ? "NULL" : "OBJECT");
+				ERR_print_errors(bio_err);
+				goto end;
+				}
 			/* hmm... this is a little evil but it works */
 			tmpbuf=at->value.asn1_string->data;
 			tmplen=at->value.asn1_string->length;
@@ -304,7 +314,15 @@ bad:
 		num=tmplen;
 		}
 
-	if (length == 0) length=(unsigned int)num;
+	if (offset >= num)
+		{
+		BIO_printf(bio_err, "Error: offset too large\n");
+		goto end;
+		}
+
+	num -= offset;
+
+	if ((length == 0) || ((long)length > num)) length=(unsigned int)num;
 	if(derout) {
 		if(BIO_write(derout, str + offset, length) != (int)length) {
 			BIO_printf(bio_err, "Error writing output\n");
@@ -332,6 +350,6 @@ end:
 	if (osk != NULL) sk_free(osk);
 	OBJ_cleanup();
 	apps_shutdown();
-	EXIT(ret);
+	OPENSSL_EXIT(ret);
 	}
 

apps/ciphers.c

@@ -203,6 +203,6 @@ end:
 	if (ssl != NULL) SSL_free(ssl);
 	if (STDout != NULL) BIO_free_all(STDout);
 	apps_shutdown();
-	EXIT(ret);
+	OPENSSL_EXIT(ret);
 	}
 

apps/crl.c

@@ -81,6 +81,7 @@ static char *crl_usage[]={
 " -in arg         - input file - default stdin\n",
 " -out arg        - output file - default stdout\n",
 " -hash           - print hash value\n",
+" -fingerprint    - print the crl fingerprint\n",
 " -issuer         - print issuer DN\n",
 " -lastupdate     - lastUpdate field\n",
 " -nextupdate     - nextUpdate field\n",
@@ -354,7 +355,11 @@ bad:
 
 	if (text) X509_CRL_print(out, x);
 
-	if (noout) goto end;
+	if (noout) 
+		{
+		ret = 0;
+		goto end;
+		}
 
 	if 	(outformat == FORMAT_ASN1)
 		i=(int)i2d_X509_CRL_bio(out,x);
@@ -377,7 +382,7 @@ end:
 		X509_STORE_free(store);
 	}
 	apps_shutdown();
-	EXIT(ret);
+	OPENSSL_EXIT(ret);
 	}
 
 static X509_CRL *load_crl(char *infile, int format)

apps/crl2p7.c

@@ -280,7 +280,7 @@ end:
 	if (crl != NULL) X509_CRL_free(crl);
 
 	apps_shutdown();
-	EXIT(ret);
+	OPENSSL_EXIT(ret);
 	}
 
 /*

apps/der_chop.in

@@ -1,305 +0,0 @@
-#!/usr/local/bin/perl
-#
-# der_chop ... this is one total hack that Eric is really not proud of
-#              so don't look at it and don't ask for support
-#
-# The "documentation" for this (i.e. all the comments) are my fault --tjh
-#
-# This program takes the "raw" output of derparse/asn1parse and 
-# converts it into tokens and then runs regular expression matches
-# to try to figure out what to grab to get the things that are needed
-# and it is possible that this will do the wrong thing as it is a *hack*
-#
-# SSLeay 0.5.2+ should have direct read support for x509 (via -inform NET)
-# [I know ... promises promises :-)]
-#
-# To convert a Netscape Certificate:
-#    der_chop < ServerCert.der > cert.pem
-# To convert a Netscape Key (and encrypt it again to protect it)
-#    rsa -inform NET -in ServerKey.der -des > key.pem
-#
-# 23-Apr-96 eay    Added the extra ASN.1 string types, I still think this
-#		   is an evil hack.  If nothing else the parsing should
-#		   be relative, not absolute.
-# 19-Apr-96 tjh    hacked (with eay) into 0.5.x format
-#
-# Tim Hudson
-# tjh@cryptsoft.com
-#
-
-
-require 'getopts.pl';
-
-$debug=0;
-
-# this was the 0.4.x way of doing things ...
-$cmd="derparse";
-$x509_cmd="x509";
-$crl_cmd="crl";
-$rc4_cmd="rc4";
-$md2_cmd="md2";
-$md4_cmd="md4";
-$rsa_cmd="rsa -des -inform der ";
-
-# this was the 0.5.x way of doing things ...
-$cmd="openssl asn1parse";
-$x509_cmd="openssl x509";
-$crl_cmd="openssl crl";
-$rc4_cmd="openssl rc4";
-$md2_cmd="openssl md2";
-$md4_cmd="openssl md4";
-$rsa_cmd="openssl rsa -des -inform der ";
-
-&Getopts('vd:') || die "usage:$0 [-v] [-d num] file";
-$depth=($opt_d =~ /^\d+$/)?$opt_d:0;
-
-&init_der();
-
-if ($#ARGV != -1)
-	{
-	foreach $file (@ARGV)
-		{
-		print STDERR "doing $file\n";
-		&dofile($file);
-		}
-	}
-else
-	{
-	$file="/tmp/a$$.DER";
-	open(OUT,">$file") || die "unable to open $file:$!\n";
-	for (;;)
-		{
-		$i=sysread(STDIN,$b,1024*10);
-		last if ($i <= 0);
-		$i=syswrite(OUT,$b,$i);
-		}
-	&dofile($file);
-	unlink($file);
-	}
-	
-sub dofile
-	{
-	local($file)=@_;
-	local(@p);
-
-	$b=&load_file($file);
-	@p=&load_file_parse($file);
-
-	foreach $_ (@p)
-		{
-		($off,$d,$hl,$len)=&parse_line($_);
-		$d-=$depth;
-		next if ($d != 0);
-		next if ($len == 0);
-
-		$o=substr($b,$off,$len+$hl);
-		($str,@data)=&der_str($o);
-		print "$str\n" if ($opt_v);
-		if ($str =~ /^$crl/)
-			{
-			open(OUT,"|$crl_cmd -inform d -hash -issuer") ||
-				die "unable to run $crl_cmd:$!\n";
-			print OUT $o;
-			close(OUT);
-			}
-		elsif ($str =~ /^$x509/)
-			{
-			open(OUT,"|$x509_cmd -inform d -hash -subject -issuer")
-				|| die "unable to run $x509_cmd:$!\n";
-			print OUT $o;
-			close(OUT);
-			}
-		elsif ($str =~ /^$rsa/)
-			{
-			($type)=($data[3] =~ /OBJECT_IDENTIFIER :(.*)\s*$/);
-			next unless ($type eq "rsaEncryption");
-			($off,$d,$hl,$len)=&parse_line($data[5]);
-			$os=substr($o,$off+$hl,$len);
-			open(OUT,"|$rsa_cmd")
-				|| die "unable to run $rsa_cmd:$!\n";
-			print OUT $os;
-			close(OUT);
-			}
-		elsif ($str =~ /^0G-1D-1G/)
-			{
-			($off,$d,$hl,$len)=&parse_line($data[1]);
-			$os=substr($o,$off+$hl,$len);
-			print STDERR "<$os>\n" if $opt_v;
-			&do_certificate($o,@data)
-				if (($os eq "certificate") &&
-				    ($str =! /^0G-1D-1G-2G-3F-3E-2D/));
-			&do_private_key($o,@data)
-				if (($os eq "private-key") &&
-				    ($str =! /^0G-1D-1G-2G-3F-3E-2D/));
-			}
-		}
-	}
-
-sub der_str
-	{
-	local($str)=@_;
-	local(*OUT,*IN,@a,$t,$d,$ret);
-	local($file)="/tmp/b$$.DER";
-	local(@ret);
-
-	open(OUT,">$file");
-	print OUT $str;
-	close(OUT);
-	open(IN,"$cmd -inform 'd' -in $file |") ||
-		die "unable to run $cmd:$!\n";
-	$ret="";
-	while (<IN>)
-		{
-		chop;
-		push(@ret,$_);
-
-		print STDERR "$_\n" if ($debug);
-
-		@a=split(/\s*:\s*/);
-		($d)=($a[1] =~ /d=\s*(\d+)/);
-		$a[2] =~ s/\s+$//;
-		$t=$DER_s2i{$a[2]};
-		$ret.="$d$t-";
-		}
-	close(IN);
-	unlink($file);
-	chop $ret;
-	$ret =~ s/(-3H(-4G-5F-5[IJKMQRS])+)+/-NAME/g;
-	$ret =~ s/(-3G-4B-4L)+/-RCERT/g;
-	return($ret,@ret);
-	}
-
-sub init_der
-	{
-	$crl= "0G-1G-2G-3F-3E-2G-NAME-2L-2L-2G-RCERT-1G-2F-2E-1C";
-	$x509="0G-1G-2B-2G-3F-3E-2G-NAME-2G-3L-3L-2G-NAME-2G-3G-4F-4E-3C-1G-2F-2E-1C";
-	$rsa= "0G-1B-1G-2F-2E-1D";
-
-	%DER_i2s=(
-		# SSLeay 0.4.x has this list
-		"A","EOC",
-		"B","INTEGER",
-		"C","BIT STRING",
-		"D","OCTET STRING",
-		"E","NULL",
-		"F","OBJECT",
-		"G","SEQUENCE",
-		"H","SET",
-		"I","PRINTABLESTRING",
-		"J","T61STRING",
-		"K","IA5STRING",
-		"L","UTCTIME",
-		"M","NUMERICSTRING",
-		"N","VIDEOTEXSTRING",
-		"O","GENERALIZEDTIME",
-		"P","GRAPHICSTRING",
-		"Q","ISO64STRING",
-		"R","GENERALSTRING",
-		"S","UNIVERSALSTRING",
-
-		# SSLeay 0.5.x changed some things ... and I'm
-		# leaving in the old stuff but adding in these
-		# to handle the new as well --tjh
-		# - Well I've just taken them out and added the extra new
-		# ones :-) - eay
-		);
-
-	foreach (keys %DER_i2s)
-		{ $DER_s2i{$DER_i2s{$_}}=$_; }
-	}
-
-sub parse_line
-	{
-	local($_)=@_;
-
-	return(/\s*(\d+):d=\s*(\d+)\s+hl=\s*(\d+)\s+l=\s*(\d+|inf)\s/);
-	}
-
-#  0:d=0 hl=4 l=377 cons: univ: SEQUENCE          
-#  4:d=1 hl=2 l= 11 prim: univ: OCTET_STRING      
-# 17:d=1 hl=4 l=360 cons: univ: SEQUENCE          
-# 21:d=2 hl=2 l= 12 cons: univ: SEQUENCE          
-# 23:d=3 hl=2 l=  8 prim: univ: OBJECT_IDENTIFIER :rc4
-# 33:d=3 hl=2 l=  0 prim: univ: NULL              
-# 35:d=2 hl=4 l=342 prim: univ: OCTET_STRING
-sub do_private_key
-	{
-	local($data,@struct)=@_;
-	local($file)="/tmp/b$$.DER";
-	local($off,$d,$hl,$len,$_,$b,@p,$s);
-
-	($type)=($struct[4] =~ /OBJECT_IDENTIFIER :(.*)\s*$/);
-	if ($type eq "rc4")
-		{
-		($off,$d,$hl,$len)=&parse_line($struct[6]);
-		open(OUT,"|$rc4_cmd >$file") ||
-			die "unable to run $rc4_cmd:$!\n";
-		print OUT substr($data,$off+$hl,$len);
-		close(OUT);
-
-		$b=&load_file($file);
-		unlink($file);
-
-		($s,@p)=&der_str($b);
-		die "unknown rsa key type\n$s\n"
-			if ($s ne '0G-1B-1G-2F-2E-1D');
-		local($off,$d,$hl,$len)=&parse_line($p[5]);
-		$b=substr($b,$off+$hl,$len);
-		($s,@p)=&der_str($b);
-		open(OUT,"|$rsa_cmd") || die "unable to run $rsa_cmd:$!\n";
-		print OUT $b;
-		close(OUT);
-		}
-	else
-		{
-		print "'$type' is unknown\n";
-		exit(1);
-		}
-	}
-
-sub do_certificate
-	{
-	local($data,@struct)=@_;
-	local($file)="/tmp/b$$.DER";
-	local($off,$d,$hl,$len,$_,$b,@p,$s);
-
-	($off,$d,$hl,$len)=&parse_line($struct[2]);
-	$b=substr($data,$off,$len+$hl);
-
-	open(OUT,"|$x509_cmd -inform d") || die "unable to run $x509_cmd:$!\n";
-	print OUT $b;
-	close(OUT);
-	}
-
-sub load_file
-	{
-	local($file)=@_;
-	local(*IN,$r,$b,$i);
-
-	$r="";
-	open(IN,"<$file") || die "unable to open $file:$!\n";
-	for (;;)
-		{
-		$i=sysread(IN,$b,10240);
-		last if ($i <= 0);
-		$r.=$b;
-		}
-	close(IN);
-	return($r);
-	}
-
-sub load_file_parse
-	{
-	local($file)=@_;
-	local(*IN,$r,@ret,$_,$i,$n,$b);
-
-	open(IN,"$cmd -inform d -in $file|")
-		|| die "unable to run der_parse\n";
-	while (<IN>)
-		{
-		chop;
-		push(@ret,$_);
-		}
-	return($r,@ret);
-	}
-

apps/dgst.c

@@ -66,6 +66,7 @@
 #include <openssl/objects.h>
 #include <openssl/x509.h>
 #include <openssl/pem.h>
+#include <openssl/hmac.h>
 
 #undef BUFSIZE
 #define BUFSIZE	1024*8
@@ -73,9 +74,11 @@
 #undef PROG
 #define PROG	dgst_main
 
+static HMAC_CTX hmac_ctx;
+
 int do_fp(BIO *out, unsigned char *buf, BIO *bp, int sep, int binout,
 	  EVP_PKEY *key, unsigned char *sigin, int siglen, const char *title,
-	  const char *file);
+	  const char *file,BIO *bmd,const char *hmac_key, int non_fips_allow);
 
 int MAIN(int, char **);
 
@@ -100,7 +103,12 @@ int MAIN(int argc, char **argv)
 	EVP_PKEY *sigkey = NULL;
 	unsigned char *sigbuf = NULL;
 	int siglen = 0;
+	char *passargin = NULL, *passin = NULL;
+#ifndef OPENSSL_NO_ENGINE
 	char *engine=NULL;
+#endif
+	char *hmac_key=NULL;
+	int non_fips_allow = 0;
 
 	apps_startup();
 
@@ -143,6 +151,12 @@ int MAIN(int argc, char **argv)
 			if (--argc < 1) break;
 			keyfile=*(++argv);
 			}
+		else if (!strcmp(*argv,"-passin"))
+			{
+			if (--argc < 1)
+				break;
+			passargin=*++argv;
+			}
 		else if (strcmp(*argv,"-verify") == 0)
 			{
 			if (--argc < 1) break;
@@ -166,17 +180,27 @@ int MAIN(int argc, char **argv)
 			if (--argc < 1) break;
 			keyform=str2fmt(*(++argv));
 			}
+#ifndef OPENSSL_NO_ENGINE
 		else if (strcmp(*argv,"-engine") == 0)
 			{
 			if (--argc < 1) break;
 			engine= *(++argv);
 			}
+#endif
 		else if (strcmp(*argv,"-hex") == 0)
 			out_bin = 0;
 		else if (strcmp(*argv,"-binary") == 0)
 			out_bin = 1;
 		else if (strcmp(*argv,"-d") == 0)
 			debug=1;
+		else if (strcmp(*argv,"-non-fips-allow") == 0)
+			non_fips_allow=1;
+		else if (!strcmp(*argv,"-hmac"))
+			{
+			if (--argc < 1)
+				break;
+			hmac_key=*++argv;
+			}
 		else if ((m=EVP_get_digestbyname(&((*argv)[1]))) != NULL)
 			md=m;
 		else
@@ -208,7 +232,9 @@ int MAIN(int argc, char **argv)
 		BIO_printf(bio_err,"-keyform arg    key file format (PEM or ENGINE)\n");
 		BIO_printf(bio_err,"-signature file signature to verify\n");
 		BIO_printf(bio_err,"-binary         output in binary form\n");
+#ifndef OPENSSL_NO_ENGINE
 		BIO_printf(bio_err,"-engine e       use engine e, possibly a hardware device.\n");
+#endif
 
 		BIO_printf(bio_err,"-%3s to use the %s message digest algorithm (default)\n",
 			LN_md5,LN_md5);
@@ -228,7 +254,9 @@ int MAIN(int argc, char **argv)
 		goto end;
 		}
 
-        e = setup_engine(bio_err, engine, 0);
+#ifndef OPENSSL_NO_ENGINE
+	e = setup_engine(bio_err, engine, 0);
+#endif
 
 	in=BIO_new(BIO_s_file());
 	bmd=BIO_new(BIO_f_md());
@@ -239,6 +267,12 @@ int MAIN(int argc, char **argv)
 		BIO_set_callback_arg(in,bio_err);
 		}
 
+	if(!app_passwd(bio_err, passargin, NULL, &passin, NULL))
+		{
+		BIO_printf(bio_err, "Error getting password\n");
+		goto end;
+		}
+
 	if ((in == NULL) || (bmd == NULL))
 		{
 		ERR_print_errors(bio_err);
@@ -280,7 +314,7 @@ int MAIN(int argc, char **argv)
 			sigkey = load_pubkey(bio_err, keyfile, keyform, 0, NULL,
 				e, "key file");
 		else
-			sigkey = load_key(bio_err, keyfile, keyform, 0, NULL,
+			sigkey = load_key(bio_err, keyfile, keyform, 0, passin,
 				e, "key file");
 		if (!sigkey)
 			{
@@ -310,18 +344,30 @@ int MAIN(int argc, char **argv)
 			goto end;
 		}
 	}
-		
 
+	if (non_fips_allow)
+		{
+		EVP_MD_CTX *md_ctx;
+		BIO_get_md_ctx(bmd,&md_ctx);
+		EVP_MD_CTX_set_flags(md_ctx, EVP_MD_CTX_FLAG_NON_FIPS_ALLOW);
+		}
 
 	/* we use md as a filter, reading from 'in' */
-	BIO_set_md(bmd,md);
+	if (!BIO_set_md(bmd,md))
+		{
+		BIO_printf(bio_err, "Error setting digest %s\n",
+							EVP_MD_name(md));
+		ERR_print_errors(bio_err);
+		goto end;
+		}
+		
 	inp=BIO_push(bmd,in);
 
 	if (argc == 0)
 		{
 		BIO_set_fp(in,stdin,BIO_NOCLOSE);
 		err=do_fp(out, buf,inp,separator, out_bin, sigkey, sigbuf,
-			  siglen,"","(stdin)");
+			  siglen,"","(stdin)",bmd,hmac_key, non_fips_allow);
 		}
 	else
 		{
@@ -339,13 +385,15 @@ int MAIN(int argc, char **argv)
 				}
 			if(!out_bin)
 				{
-				tmp=tofree=OPENSSL_malloc(strlen(name)+strlen(argv[i])+5);
-				sprintf(tmp,"%s(%s)= ",name,argv[i]);
+				size_t len = strlen(name)+strlen(argv[i])+(hmac_key ? 5 : 0)+5;
+				tmp=tofree=OPENSSL_malloc(len);
+				BIO_snprintf(tmp,len,"%s%s(%s)= ",
+							 hmac_key ? "HMAC-" : "",name,argv[i]);
 				}
 			else
 				tmp="";
 			r=do_fp(out,buf,inp,separator,out_bin,sigkey,sigbuf,
-				siglen,tmp,argv[i]);
+				siglen,tmp,argv[i],bmd,hmac_key,non_fips_allow);
 			if(r)
 			    err=r;
 			if(tofree)
@@ -356,25 +404,41 @@ int MAIN(int argc, char **argv)
 end:
 	if (buf != NULL)
 		{
-		memset(buf,0,BUFSIZE);
+		OPENSSL_cleanse(buf,BUFSIZE);
 		OPENSSL_free(buf);
 		}
 	if (in != NULL) BIO_free(in);
+	if (passin)
+		OPENSSL_free(passin);
 	BIO_free_all(out);
 	EVP_PKEY_free(sigkey);
 	if(sigbuf) OPENSSL_free(sigbuf);
 	if (bmd != NULL) BIO_free(bmd);
 	apps_shutdown();
-	EXIT(err);
+	OPENSSL_EXIT(err);
 	}
 
 int do_fp(BIO *out, unsigned char *buf, BIO *bp, int sep, int binout,
 	  EVP_PKEY *key, unsigned char *sigin, int siglen, const char *title,
-	  const char *file)
+	  const char *file,BIO *bmd,const char *hmac_key, int non_fips_allow)
 	{
-	int len;
+	unsigned int len;
 	int i;
+	EVP_MD_CTX *md_ctx;
 
+	if (hmac_key)
+		{
+		EVP_MD *md;
+
+		BIO_get_md(bmd,&md);
+		HMAC_CTX_init(&hmac_ctx);
+		if (non_fips_allow)
+			HMAC_CTX_set_flags(&hmac_ctx,
+					EVP_MD_CTX_FLAG_NON_FIPS_ALLOW);
+		HMAC_Init_ex(&hmac_ctx,hmac_key,strlen(hmac_key),md, NULL);
+		BIO_get_md_ctx(bmd,&md_ctx);
+		BIO_set_md_ctx(bmd,&hmac_ctx.md_ctx);
+		}
 	for (;;)
 		{
 		i=BIO_read(bp,(char *)buf,BUFSIZE);
@@ -417,6 +481,11 @@ int do_fp(BIO *out, unsigned char *buf, BIO *bp, int sep, int binout,
 			return 1;
 			}
 		}
+	else if(hmac_key)
+		{
+		HMAC_Final(&hmac_ctx,buf,&len);
+		HMAC_CTX_cleanup(&hmac_ctx);
+		}
 	else
 		len=BIO_gets(bp,(char *)buf,BUFSIZE);
 
@@ -424,7 +493,7 @@ int do_fp(BIO *out, unsigned char *buf, BIO *bp, int sep, int binout,
 	else 
 		{
 		BIO_write(out,title,strlen(title));
-		for (i=0; i<len; i++)
+		for (i=0; (unsigned int)i<len; i++)
 			{
 			if (sep && (i != 0))
 				BIO_printf(out, ":");
@@ -432,6 +501,10 @@ int do_fp(BIO *out, unsigned char *buf, BIO *bp, int sep, int binout,
 			}
 		BIO_printf(out, "\n");
 		}
+	if (hmac_key)
+		{
+		BIO_set_md_ctx(bmd,md_ctx);
+		}
 	return 0;
 	}
 

apps/dh.c

@@ -87,12 +87,17 @@ int MAIN(int, char **);
 
 int MAIN(int argc, char **argv)
 	{
+#ifndef OPENSSL_NO_ENGINE
 	ENGINE *e = NULL;
+#endif
 	DH *dh=NULL;
 	int i,badops=0,text=0;
 	BIO *in=NULL,*out=NULL;
 	int informat,outformat,check=0,noout=0,C=0,ret=1;
-	char *infile,*outfile,*prog,*engine;
+	char *infile,*outfile,*prog;
+#ifndef OPENSSL_NO_ENGINE
+	char *engine;
+#endif
 
 	apps_startup();
 
@@ -103,7 +108,9 @@ int MAIN(int argc, char **argv)
 	if (!load_config(bio_err, NULL))
 		goto end;
 
+#ifndef OPENSSL_NO_ENGINE
 	engine=NULL;
+#endif
 	infile=NULL;
 	outfile=NULL;
 	informat=FORMAT_PEM;
@@ -134,11 +141,13 @@ int MAIN(int argc, char **argv)
 			if (--argc < 1) goto bad;
 			outfile= *(++argv);
 			}
+#ifndef OPENSSL_NO_ENGINE
 		else if (strcmp(*argv,"-engine") == 0)
 			{
 			if (--argc < 1) goto bad;
 			engine= *(++argv);
 			}
+#endif
 		else if (strcmp(*argv,"-check") == 0)
 			check=1;
 		else if (strcmp(*argv,"-text") == 0)
@@ -170,13 +179,17 @@ bad:
 		BIO_printf(bio_err," -text         print a text form of the DH parameters\n");
 		BIO_printf(bio_err," -C            Output C code\n");
 		BIO_printf(bio_err," -noout        no output\n");
+#ifndef OPENSSL_NO_ENGINE
 		BIO_printf(bio_err," -engine e     use engine e, possibly a hardware device.\n");
+#endif
 		goto end;
 		}
 
 	ERR_load_crypto_strings();
 
+#ifndef OPENSSL_NO_ENGINE
         e = setup_engine(bio_err, engine, 0);
+#endif
 
 	in=BIO_new(BIO_s_file());
 	out=BIO_new(BIO_s_file());
@@ -333,6 +346,6 @@ end:
 	if (out != NULL) BIO_free_all(out);
 	if (dh != NULL) DH_free(dh);
 	apps_shutdown();
-	EXIT(ret);
+	OPENSSL_EXIT(ret);
 	}
 #endif

apps/dhparam.c

@@ -148,7 +148,9 @@ int MAIN(int, char **);
 
 int MAIN(int argc, char **argv)
 	{
+#ifndef OPENSSL_NO_ENGINE
 	ENGINE *e = NULL;
+#endif
 	DH *dh=NULL;
 	int i,badops=0,text=0;
 #ifndef OPENSSL_NO_DSA
@@ -157,7 +159,10 @@ int MAIN(int argc, char **argv)
 	BIO *in=NULL,*out=NULL;
 	int informat,outformat,check=0,noout=0,C=0,ret=1;
 	char *infile,*outfile,*prog;
-	char *inrand=NULL,*engine=NULL;
+	char *inrand=NULL;
+#ifndef OPENSSL_NO_ENGINE
+	char *engine=NULL;
+#endif
 	int num = 0, g = 0;
 
 	apps_startup();
@@ -199,11 +204,13 @@ int MAIN(int argc, char **argv)
 			if (--argc < 1) goto bad;
 			outfile= *(++argv);
 			}
+#ifndef OPENSSL_NO_ENGINE
 		else if (strcmp(*argv,"-engine") == 0)
 			{
 			if (--argc < 1) goto bad;
 			engine= *(++argv);
 			}
+#endif
 		else if (strcmp(*argv,"-check") == 0)
 			check=1;
 		else if (strcmp(*argv,"-text") == 0)
@@ -249,7 +256,9 @@ bad:
 		BIO_printf(bio_err," -2            generate parameters using  2 as the generator value\n");
 		BIO_printf(bio_err," -5            generate parameters using  5 as the generator value\n");
 		BIO_printf(bio_err," numbits       number of bits in to generate (default 512)\n");
+#ifndef OPENSSL_NO_ENGINE
 		BIO_printf(bio_err," -engine e     use engine e, possibly a hardware device.\n");
+#endif
 		BIO_printf(bio_err," -rand file%cfile%c...\n", LIST_SEPARATOR_CHAR, LIST_SEPARATOR_CHAR);
 		BIO_printf(bio_err,"               - load the file (or the files in the directory) into\n");
 		BIO_printf(bio_err,"               the random number generator\n");
@@ -259,7 +268,9 @@ bad:
 
 	ERR_load_crypto_strings();
 
+#ifndef OPENSSL_NO_ENGINE
         e = setup_engine(bio_err, engine, 0);
+#endif
 
 	if (g && !num)
 		num = DEFBITS;
@@ -519,7 +530,7 @@ end:
 	if (out != NULL) BIO_free_all(out);
 	if (dh != NULL) DH_free(dh);
 	apps_shutdown();
-	EXIT(ret);
+	OPENSSL_EXIT(ret);
 	}
 
 /* dh_cb is identical to dsa_cb in apps/dsaparam.c */

apps/dsa.c

@@ -90,7 +90,9 @@ int MAIN(int, char **);
 
 int MAIN(int argc, char **argv)
 	{
+#ifndef OPENSSL_NO_ENGINE
 	ENGINE *e = NULL;
+#endif
 	int ret=1;
 	DSA *dsa=NULL;
 	int i,badops=0;
@@ -98,7 +100,10 @@ int MAIN(int argc, char **argv)
 	BIO *in=NULL,*out=NULL;
 	int informat,outformat,text=0,noout=0;
 	int pubin = 0, pubout = 0;
-	char *infile,*outfile,*prog,*engine;
+	char *infile,*outfile,*prog;
+#ifndef OPENSSL_NO_ENGINE
+	char *engine;
+#endif
 	char *passargin = NULL, *passargout = NULL;
 	char *passin = NULL, *passout = NULL;
 	int modulus=0;
@@ -112,7 +117,9 @@ int MAIN(int argc, char **argv)
 	if (!load_config(bio_err, NULL))
 		goto end;
 
+#ifndef OPENSSL_NO_ENGINE
 	engine=NULL;
+#endif
 	infile=NULL;
 	outfile=NULL;
 	informat=FORMAT_PEM;
@@ -153,11 +160,13 @@ int MAIN(int argc, char **argv)
 			if (--argc < 1) goto bad;
 			passargout= *(++argv);
 			}
+#ifndef OPENSSL_NO_ENGINE
 		else if (strcmp(*argv,"-engine") == 0)
 			{
 			if (--argc < 1) goto bad;
 			engine= *(++argv);
 			}
+#endif
 		else if (strcmp(*argv,"-noout") == 0)
 			noout=1;
 		else if (strcmp(*argv,"-text") == 0)
@@ -189,7 +198,9 @@ bad:
 		BIO_printf(bio_err," -passin arg     input file pass phrase source\n");
 		BIO_printf(bio_err," -out arg        output file\n");
 		BIO_printf(bio_err," -passout arg    output file pass phrase source\n");
+#ifndef OPENSSL_NO_ENGINE
 		BIO_printf(bio_err," -engine e       use engine e, possibly a hardware device.\n");
+#endif
 		BIO_printf(bio_err," -des            encrypt PEM output with cbc des\n");
 		BIO_printf(bio_err," -des3           encrypt PEM output with ede cbc des using 168 bit key\n");
 #ifndef OPENSSL_NO_IDEA
@@ -207,7 +218,9 @@ bad:
 
 	ERR_load_crypto_strings();
 
+#ifndef OPENSSL_NO_ENGINE
         e = setup_engine(bio_err, engine, 0);
+#endif
 
 	if(!app_passwd(bio_err, passargin, passargout, &passin, &passout)) {
 		BIO_printf(bio_err, "Error getting passwords\n");
@@ -314,6 +327,6 @@ end:
 	if(passin) OPENSSL_free(passin);
 	if(passout) OPENSSL_free(passout);
 	apps_shutdown();
-	EXIT(ret);
+	OPENSSL_EXIT(ret);
 	}
 #endif

apps/dsaparam.c

@@ -90,7 +90,9 @@ int MAIN(int, char **);
 
 int MAIN(int argc, char **argv)
 	{
+#ifndef OPENSSL_NO_ENGINE
 	ENGINE *e = NULL;
+#endif
 	DSA *dsa=NULL;
 	int i,badops=0,text=0;
 	BIO *in=NULL,*out=NULL;
@@ -98,7 +100,9 @@ int MAIN(int argc, char **argv)
 	char *infile,*outfile,*prog,*inrand=NULL;
 	int numbits= -1,num,genkey=0;
 	int need_rand=0;
+#ifndef OPENSSL_NO_ENGINE
 	char *engine=NULL;
+#endif
 
 	apps_startup();
 
@@ -139,11 +143,13 @@ int MAIN(int argc, char **argv)
 			if (--argc < 1) goto bad;
 			outfile= *(++argv);
 			}
+#ifndef OPENSSL_NO_ENGINE
 		else if(strcmp(*argv, "-engine") == 0)
 			{
 			if (--argc < 1) goto bad;
 			engine = *(++argv);
 			}
+#endif
 		else if (strcmp(*argv,"-text") == 0)
 			text=1;
 		else if (strcmp(*argv,"-C") == 0)
@@ -191,7 +197,9 @@ bad:
 		BIO_printf(bio_err," -noout        no output\n");
 		BIO_printf(bio_err," -genkey       generate a DSA key\n");
 		BIO_printf(bio_err," -rand         files to use for random number input\n");
+#ifndef OPENSSL_NO_ENGINE
 		BIO_printf(bio_err," -engine e     use engine e, possibly a hardware device.\n");
+#endif
 		BIO_printf(bio_err," number        number of bits to use for generating private key\n");
 		goto end;
 		}
@@ -235,7 +243,9 @@ bad:
 			}
 		}
 
+#ifndef OPENSSL_NO_ENGINE
         e = setup_engine(bio_err, engine, 0);
+#endif
 
 	if (need_rand)
 		{
@@ -372,7 +382,7 @@ end:
 	if (out != NULL) BIO_free_all(out);
 	if (dsa != NULL) DSA_free(dsa);
 	apps_shutdown();
-	EXIT(ret);
+	OPENSSL_EXIT(ret);
 	}
 
 static void MS_CALLBACK dsa_cb(int p, int n, void *arg)

apps/enc.c

@@ -100,7 +100,9 @@ int MAIN(int, char **);
 
 int MAIN(int argc, char **argv)
 	{
+#ifndef OPENSSL_NO_ENGINE
 	ENGINE *e = NULL;
+#endif
 	static const char magic[]="Salted__";
 	char mbuf[sizeof magic-1];
 	char *strbuf=NULL;
@@ -112,14 +114,20 @@ int MAIN(int argc, char **argv)
 	unsigned char salt[PKCS5_SALT_LEN];
 	char *str=NULL, *passarg = NULL, *pass = NULL;
 	char *hkey=NULL,*hiv=NULL,*hsalt = NULL;
+	char *md=NULL;
 	int enc=1,printkey=0,i,base64=0;
 	int debug=0,olb64=0,nosalt=0;
 	const EVP_CIPHER *cipher=NULL,*c;
+	EVP_CIPHER_CTX *ctx = NULL;
 	char *inf=NULL,*outf=NULL;
 	BIO *in=NULL,*out=NULL,*b64=NULL,*benc=NULL,*rbio=NULL,*wbio=NULL;
 #define PROG_NAME_SIZE  39
 	char pname[PROG_NAME_SIZE+1];
+#ifndef OPENSSL_NO_ENGINE
 	char *engine = NULL;
+#endif
+	const EVP_MD *dgst=NULL;
+	int non_fips_allow = 0;
 
 	apps_startup();
 
@@ -163,11 +171,13 @@ int MAIN(int argc, char **argv)
 			if (--argc < 1) goto bad;
 			passarg= *(++argv);
 			}
+#ifndef OPENSSL_NO_ENGINE
 		else if (strcmp(*argv,"-engine") == 0)
 			{
 			if (--argc < 1) goto bad;
 			engine= *(++argv);
 			}
+#endif
 		else if	(strcmp(*argv,"-d") == 0)
 			enc=0;
 		else if	(strcmp(*argv,"-p") == 0)
@@ -247,6 +257,13 @@ int MAIN(int argc, char **argv)
 			if (--argc < 1) goto bad;
 			hiv= *(++argv);
 			}
+		else if (strcmp(*argv,"-md") == 0)
+			{
+			if (--argc < 1) goto bad;
+			md= *(++argv);
+			}
+		else if (strcmp(*argv,"-non-fips-allow") == 0)
+			non_fips_allow = 1;
 		else if	((argv[0][0] == '-') &&
 			((c=EVP_get_cipherbyname(&(argv[0][1]))) != NULL))
 			{
@@ -265,12 +282,16 @@ bad:
 			BIO_printf(bio_err,"%-14s encrypt\n","-e");
 			BIO_printf(bio_err,"%-14s decrypt\n","-d");
 			BIO_printf(bio_err,"%-14s base64 encode/decode, depending on encryption flag\n","-a/-base64");
-			BIO_printf(bio_err,"%-14s key is the next argument\n","-k");
-			BIO_printf(bio_err,"%-14s key is the first line of the file argument\n","-kfile");
+			BIO_printf(bio_err,"%-14s passphrase is the next argument\n","-k");
+			BIO_printf(bio_err,"%-14s passphrase is the first line of the file argument\n","-kfile");
+			BIO_printf(bio_err,"%-14s the next argument is the md to use to create a key\n","-md");
+			BIO_printf(bio_err,"%-14s   from a passphrase.  One of md2, md5, sha or sha1\n","");
 			BIO_printf(bio_err,"%-14s key/iv in hex is the next argument\n","-K/-iv");
 			BIO_printf(bio_err,"%-14s print the iv/key (then exit if -P)\n","-[pP]");
 			BIO_printf(bio_err,"%-14s buffer size\n","-bufsize <n>");
+#ifndef OPENSSL_NO_ENGINE
 			BIO_printf(bio_err,"%-14s use engine e, possibly a hardware device.\n","-engine e");
+#endif
 
 			BIO_printf(bio_err,"Cipher Types\n");
 			OBJ_NAME_do_all_sorted(OBJ_NAME_TYPE_CIPHER_METH,
@@ -284,7 +305,23 @@ bad:
 		argv++;
 		}
 
+#ifndef OPENSSL_NO_ENGINE
         e = setup_engine(bio_err, engine, 0);
+#endif
+
+	if (md && (dgst=EVP_get_digestbyname(md)) == NULL)
+		{
+		BIO_printf(bio_err,"%s is an unsupported message digest type\n",md);
+		goto end;
+		}
+
+	if (dgst == NULL)
+		{
+		if (in_FIPS_mode)
+			dgst = EVP_sha1();
+		else
+			dgst = EVP_md5();
+		}
 
 	if (bufsize != NULL)
 		{
@@ -363,9 +400,9 @@ bad:
 			{
 			char buf[200];
 
-			sprintf(buf,"enter %s %s password:",
-				OBJ_nid2ln(EVP_CIPHER_nid(cipher)),
-				(enc)?"encryption":"decryption");
+			BIO_snprintf(buf,sizeof buf,"enter %s %s password:",
+				     OBJ_nid2ln(EVP_CIPHER_nid(cipher)),
+				     (enc)?"encryption":"decryption");
 			strbuf[0]='\0';
 			i=EVP_read_pw_string((char *)strbuf,SIZE,buf,enc);
 			if (i == 0)
@@ -473,7 +510,7 @@ bad:
 				sptr = salt;
 			}
 
-			EVP_BytesToKey(cipher,EVP_md5(),sptr,
+			EVP_BytesToKey(cipher,dgst,sptr,
 				(unsigned char *)str,
 				strlen(str),1,key,iv);
 			/* zero the complete buffer or the string
@@ -481,9 +518,9 @@ bad:
 			 * bug picked up by
 			 * Larry J. Hughes Jr. <hughes@indiana.edu> */
 			if (str == strbuf)
-				memset(str,0,SIZE);
+				OPENSSL_cleanse(str,SIZE);
 			else
-				memset(str,0,strlen(str));
+				OPENSSL_cleanse(str,strlen(str));
 			}
 		if ((hiv != NULL) && !set_hex(hiv,iv,sizeof iv))
 			{
@@ -506,13 +543,43 @@ bad:
 
 		if ((benc=BIO_new(BIO_f_cipher())) == NULL)
 			goto end;
-		BIO_set_cipher(benc,cipher,key,iv,enc);
-		if (nopad)
+
+		/* Since we may be changing parameters work on the encryption
+		 * context rather than calling BIO_set_cipher().
+		 */
+
+		BIO_get_cipher_ctx(benc, &ctx);
+		if (!EVP_CipherInit_ex(ctx, cipher, NULL, NULL, NULL, enc))
 			{
-			EVP_CIPHER_CTX *ctx;
-			BIO_get_cipher_ctx(benc, &ctx);
-			EVP_CIPHER_CTX_set_padding(ctx, 0);
+			BIO_printf(bio_err, "Error setting cipher %s\n",
+					EVP_CIPHER_name(cipher));
+			ERR_print_errors(bio_err);
+			goto end;
 			}
+
+		if (non_fips_allow)
+			EVP_CIPHER_CTX_set_flags(ctx,
+				EVP_CIPH_FLAG_NON_FIPS_ALLOW);
+
+		if (!EVP_CipherInit_ex(ctx, NULL, NULL, key, iv, enc))
+			{
+			BIO_printf(bio_err, "Error setting cipher %s\n",
+					EVP_CIPHER_name(cipher));
+			ERR_print_errors(bio_err);
+			goto end;
+			}
+
+		if (nopad)
+			EVP_CIPHER_CTX_set_padding(ctx, 0);
+
+		if (!EVP_CipherInit_ex(ctx, NULL, NULL, key, iv, enc))
+			{
+			BIO_printf(bio_err, "Error setting cipher %s\n",
+					EVP_CIPHER_name(cipher));
+			ERR_print_errors(bio_err);
+			goto end;
+			}
+
 		if (debug)
 			{
 			BIO_set_callback(benc,BIO_debug_callback);
@@ -586,7 +653,7 @@ end:
 	if (b64 != NULL) BIO_free(b64);
 	if(pass) OPENSSL_free(pass);
 	apps_shutdown();
-	EXIT(ret);
+	OPENSSL_EXIT(ret);
 	}
 
 int set_hex(char *in, unsigned char *out, int size)

apps/engine.c

@@ -56,6 +56,8 @@
  *
  */
 
+#ifndef OPENSSL_NO_ENGINE
+
 #include <stdio.h>
 #include <stdlib.h>
 #include <string.h>
@@ -120,8 +122,8 @@ static int append_buf(char **buf, const char *s, int *size, int step)
 		return 0;
 
 	if (**buf != '\0')
-		strcat(*buf, ", ");
-	strcat(*buf, s);
+		BUF_strlcat(*buf, ", ", *size);
+	BUF_strlcat(*buf, s, *size);
 
 	return 1;
 	}
@@ -385,11 +387,15 @@ int MAIN(int argc, char **argv)
 		else if (strcmp(*argv,"-pre") == 0)
 			{
 			argc--; argv++;
+			if (argc == 0)
+				goto skip_arg_loop;
 			sk_push(pre_cmds,*argv);
 			}
 		else if (strcmp(*argv,"-post") == 0)
 			{
 			argc--; argv++;
+			if (argc == 0)
+				goto skip_arg_loop;
 			sk_push(post_cmds,*argv);
 			}
 		else if ((strncmp(*argv,"-h",2) == 0) ||
@@ -516,5 +522,12 @@ end:
 	sk_pop_free(post_cmds, identity);
 	if (bio_out != NULL) BIO_free_all(bio_out);
 	apps_shutdown();
-	EXIT(ret);
+	OPENSSL_EXIT(ret);
 	}
+#else
+
+# if PEDANTIC
+static void *dummy=&dummy;
+# endif
+
+#endif

apps/errstr.c

@@ -122,5 +122,5 @@ int MAIN(int argc, char **argv)
 			}
 		}
 	apps_shutdown();
-	EXIT(ret);
+	OPENSSL_EXIT(ret);
 	}

apps/gendh.c

@@ -81,13 +81,17 @@ int MAIN(int, char **);
 
 int MAIN(int argc, char **argv)
 	{
+#ifndef OPENSSL_NO_ENGINE
 	ENGINE *e = NULL;
+#endif
 	DH *dh=NULL;
 	int ret=1,num=DEFBITS;
 	int g=2;
 	char *outfile=NULL;
 	char *inrand=NULL;
+#ifndef OPENSSL_NO_ENGINE
 	char *engine=NULL;
+#endif
 	BIO *out=NULL;
 
 	apps_startup();
@@ -115,11 +119,13 @@ int MAIN(int argc, char **argv)
 			g=3; */
 		else if (strcmp(*argv,"-5") == 0)
 			g=5;
+#ifndef OPENSSL_NO_ENGINE
 		else if (strcmp(*argv,"-engine") == 0)
 			{
 			if (--argc < 1) goto bad;
 			engine= *(++argv);
 			}
+#endif
 		else if (strcmp(*argv,"-rand") == 0)
 			{
 			if (--argc < 1) goto bad;
@@ -138,14 +144,18 @@ bad:
 		BIO_printf(bio_err," -2        - use 2 as the generator value\n");
 	/*	BIO_printf(bio_err," -3        - use 3 as the generator value\n"); */
 		BIO_printf(bio_err," -5        - use 5 as the generator value\n");
+#ifndef OPENSSL_NO_ENGINE
 		BIO_printf(bio_err," -engine e - use engine e, possibly a hardware device.\n");
+#endif
 		BIO_printf(bio_err," -rand file%cfile%c...\n", LIST_SEPARATOR_CHAR, LIST_SEPARATOR_CHAR);
 		BIO_printf(bio_err,"           - load the file (or the files in the directory) into\n");
 		BIO_printf(bio_err,"             the random number generator\n");
 		goto end;
 		}
 		
+#ifndef OPENSSL_NO_ENGINE
         e = setup_engine(bio_err, engine, 0);
+#endif
 
 	out=BIO_new(BIO_s_file());
 	if (out == NULL)
@@ -198,7 +208,7 @@ end:
 	if (out != NULL) BIO_free_all(out);
 	if (dh != NULL) DH_free(dh);
 	apps_shutdown();
-	EXIT(ret);
+	OPENSSL_EXIT(ret);
 	}
 
 static void MS_CALLBACK dh_cb(int p, int n, void *arg)

apps/gendsa.c

@@ -77,7 +77,9 @@ int MAIN(int, char **);
 
 int MAIN(int argc, char **argv)
 	{
+#ifndef OPENSSL_NO_ENGINE
 	ENGINE *e = NULL;
+#endif
 	DSA *dsa=NULL;
 	int ret=1;
 	char *outfile=NULL;
@@ -85,7 +87,9 @@ int MAIN(int argc, char **argv)
 	char *passargout = NULL, *passout = NULL;
 	BIO *out=NULL,*in=NULL;
 	const EVP_CIPHER *enc=NULL;
+#ifndef OPENSSL_NO_ENGINE
 	char *engine=NULL;
+#endif
 
 	apps_startup();
 
@@ -111,11 +115,13 @@ int MAIN(int argc, char **argv)
 			if (--argc < 1) goto bad;
 			passargout= *(++argv);
 			}
+#ifndef OPENSSL_NO_ENGINE
 		else if (strcmp(*argv,"-engine") == 0)
 			{
 			if (--argc < 1) goto bad;
 			engine= *(++argv);
 			}
+#endif
 		else if (strcmp(*argv,"-rand") == 0)
 			{
 			if (--argc < 1) goto bad;
@@ -167,7 +173,9 @@ bad:
 		BIO_printf(bio_err," -aes128, -aes192, -aes256\n");
 		BIO_printf(bio_err,"                 encrypt PEM output with cbc aes\n");
 #endif
+#ifndef OPENSSL_NO_ENGINE
 		BIO_printf(bio_err," -engine e - use engine e, possibly a hardware device.\n");
+#endif
 		BIO_printf(bio_err," -rand file%cfile%c...\n", LIST_SEPARATOR_CHAR, LIST_SEPARATOR_CHAR);
 		BIO_printf(bio_err,"           - load the file (or the files in the directory) into\n");
 		BIO_printf(bio_err,"             the random number generator\n");
@@ -176,7 +184,9 @@ bad:
 		goto end;
 		}
 
+#ifndef OPENSSL_NO_ENGINE
         e = setup_engine(bio_err, engine, 0);
+#endif
 
 	if(!app_passwd(bio_err, NULL, passargout, NULL, &passout)) {
 		BIO_printf(bio_err, "Error getting password\n");
@@ -246,6 +256,6 @@ end:
 	if (dsa != NULL) DSA_free(dsa);
 	if(passout) OPENSSL_free(passout);
 	apps_shutdown();
-	EXIT(ret);
+	OPENSSL_EXIT(ret);
 	}
 #endif

apps/genrsa.c

@@ -81,16 +81,23 @@ int MAIN(int, char **);
 
 int MAIN(int argc, char **argv)
 	{
+#ifndef OPENSSL_NO_ENGINE
 	ENGINE *e = NULL;
+#endif
 	int ret=1;
 	RSA *rsa=NULL;
 	int i,num=DEFBITS;
 	long l;
+#ifdef OPENSSL_FIPS
+	int use_x931 = 0;
+#endif
 	const EVP_CIPHER *enc=NULL;
 	unsigned long f4=RSA_F4;
 	char *outfile=NULL;
 	char *passargout = NULL, *passout = NULL;
+#ifndef OPENSSL_NO_ENGINE
 	char *engine=NULL;
+#endif
 	char *inrand=NULL;
 	BIO *out=NULL;
 
@@ -122,11 +129,17 @@ int MAIN(int argc, char **argv)
 			f4=3;
 		else if (strcmp(*argv,"-F4") == 0 || strcmp(*argv,"-f4") == 0)
 			f4=RSA_F4;
+#ifdef OPENSSL_FIPS
+		else if (strcmp(*argv,"-x931") == 0)
+			use_x931 = 1;
+#endif
+#ifndef OPENSSL_NO_ENGINE
 		else if (strcmp(*argv,"-engine") == 0)
 			{
 			if (--argc < 1) goto bad;
 			engine= *(++argv);
 			}
+#endif
 		else if (strcmp(*argv,"-rand") == 0)
 			{
 			if (--argc < 1) goto bad;
@@ -177,7 +190,9 @@ bad:
 		BIO_printf(bio_err," -passout arg    output file pass phrase source\n");
 		BIO_printf(bio_err," -f4             use F4 (0x10001) for the E value\n");
 		BIO_printf(bio_err," -3              use 3 for the E value\n");
+#ifndef OPENSSL_NO_ENGINE
 		BIO_printf(bio_err," -engine e       use engine e, possibly a hardware device.\n");
+#endif
 		BIO_printf(bio_err," -rand file%cfile%c...\n", LIST_SEPARATOR_CHAR, LIST_SEPARATOR_CHAR);
 		BIO_printf(bio_err,"                 load the file (or the files in the directory) into\n");
 		BIO_printf(bio_err,"                 the random number generator\n");
@@ -191,7 +206,9 @@ bad:
 		goto err;
 	}
 
+#ifndef OPENSSL_NO_ENGINE
         e = setup_engine(bio_err, engine, 0);
+#endif
 
 	if (outfile == NULL)
 		{
@@ -223,11 +240,27 @@ bad:
 
 	BIO_printf(bio_err,"Generating RSA private key, %d bit long modulus\n",
 		num);
-	rsa=RSA_generate_key(num,f4,genrsa_cb,bio_err);
+#ifdef OPENSSL_FIPS
+	if (use_x931)
+		{
+		BIGNUM *pubexp;
+		pubexp = BN_new();
+		BN_set_word(pubexp, f4);
+		rsa = RSA_X931_generate_key(num, pubexp, genrsa_cb, bio_err);
+		BN_free(pubexp);
+		}
+	else
+#endif
+		rsa=RSA_generate_key(num,f4,genrsa_cb,bio_err);
 		
 	app_RAND_write_file(NULL, bio_err);
 
-	if (rsa == NULL) goto err;
+	if (rsa == NULL)
+		{
+		BIO_printf(bio_err, "Key Generation error\n");
+
+		goto err;
+		}
 	
 	/* We need to do the following for when the base number size is <
 	 * long, esp windows 3.1 :-(. */
@@ -258,7 +291,7 @@ err:
 	if (ret != 0)
 		ERR_print_errors(bio_err);
 	apps_shutdown();
-	EXIT(ret);
+	OPENSSL_EXIT(ret);
 	}
 
 static void MS_CALLBACK genrsa_cb(int p, int n, void *arg)

apps/makeapps.com

@@ -142,13 +142,13 @@ $ LIB_FILES = "VERIFY;ASN1PARS;REQ;DGST;DH;DHPARAM;ENC;PASSWD;GENDH;ERRSTR;"+-
 	      "RSA;RSAUTL;DSA;DSAPARAM;"+-
 	      "X509;GENRSA;GENDSA;S_SERVER;S_CLIENT;SPEED;"+-
 	      "S_TIME;APPS;S_CB;S_SOCKET;APP_RAND;VERSION;SESS_ID;"+-
-	      "CIPHERS;NSEQ;PKCS12;PKCS8;SPKAC;SMIME;RAND;ENGINE;OCSP"
+	      "CIPHERS;NSEQ;PKCS12;PKCS8;SPKAC;SMIME;RAND;ENGINE;OCSP;PRIME"
 $ APP_FILES := OPENSSL,'OBJ_DIR'VERIFY.OBJ,ASN1PARS.OBJ,REQ.OBJ,DGST.OBJ,DH.OBJ,DHPARAM.OBJ,ENC.OBJ,PASSWD.OBJ,GENDH.OBJ,ERRSTR.OBJ,-
 	       CA.OBJ,PKCS7.OBJ,CRL2P7.OBJ,CRL.OBJ,-
 	       RSA.OBJ,RSAUTL.OBJ,DSA.OBJ,DSAPARAM.OBJ,-
 	       X509.OBJ,GENRSA.OBJ,GENDSA.OBJ,S_SERVER.OBJ,S_CLIENT.OBJ,SPEED.OBJ,-
 	       S_TIME.OBJ,APPS.OBJ,S_CB.OBJ,S_SOCKET.OBJ,APP_RAND.OBJ,VERSION.OBJ,SESS_ID.OBJ,-
-	       CIPHERS.OBJ,NSEQ.OBJ,PKCS12.OBJ,PKCS8.OBJ,SPKAC.OBJ,SMIME.OBJ,RAND.OBJ,ENGINE.OBJ,OCSP.OBJ
+	       CIPHERS.OBJ,NSEQ.OBJ,PKCS12.OBJ,PKCS8.OBJ,SPKAC.OBJ,SMIME.OBJ,RAND.OBJ,ENGINE.OBJ,OCSP.OBJ,PRIME.OBJ
 $ TCPIP_PROGRAMS = ",,"
 $ IF COMPILER .EQS. "VAXC" THEN -
      TCPIP_PROGRAMS = ",OPENSSL,"
@@ -166,7 +166,7 @@ $!     TCPIP_PROGRAMS = ",S_SERVER,S_CLIENT,SESS_ID,CIPHERS,S_TIME,"
 $!
 $! Setup exceptional compilations
 $!
-$ COMPILEWITH_CC2 = ",S_SOCKET,S_SERVER,S_CLIENT,"
+$ COMPILEWITH_CC2 = ",S_SERVER,S_CLIENT,"
 $!
 $ PHASE := LIB
 $!
@@ -650,7 +650,7 @@ $ CCDEFS = "MONOLITH"
 $ IF F$TYPE(USER_CCDEFS) .NES. "" THEN CCDEFS = CCDEFS + "," + USER_CCDEFS
 $ CCEXTRAFLAGS = ""
 $ IF F$TYPE(USER_CCFLAGS) .NES. "" THEN CCEXTRAFLAGS = USER_CCFLAGS
-$ CCDISABLEWARNINGS = "LONGLONGTYPE,LONGLONGSUFX"
+$ CCDISABLEWARNINGS = "LONGLONGTYPE,LONGLONGSUFX,FOUNDCR"
 $ IF F$TYPE(USER_CCDISABLEWARNINGS) .NES. "" THEN -
 	CCDISABLEWARNINGS = CCDISABLEWARNINGS + "," + USER_CCDISABLEWARNINGS
 $!
@@ -679,7 +679,7 @@ $     IF ARCH.EQS."VAX" .AND. F$TRNLNM("DECC$CC_DEFAULT").NES."/DECC" -
 	 THEN CC = "CC/DECC"
 $     CC = CC + "/''CC_OPTIMIZE'/''DEBUGGER'/STANDARD=ANSI89" + -
            "/NOLIST/PREFIX=ALL" + -
-	   "/INCLUDE=(SYS$DISK:[-])" + CCEXTRAFLAGS
+	   "/INCLUDE=(SYS$DISK:[-],SYS$DISK:[-.CRYPTO])" + CCEXTRAFLAGS
 $!
 $!    Define The Linker Options File Name.
 $!
@@ -711,7 +711,7 @@ $	EXIT
 $     ENDIF
 $     IF F$TRNLNM("DECC$CC_DEFAULT").EQS."/DECC" THEN CC = "CC/VAXC"
 $     CC = CC + "/''CC_OPTIMIZE'/''DEBUGGER'/NOLIST" + -
-	   "/INCLUDE=(SYS$DISK:[-])" + CCEXTRAFLAGS
+	   "/INCLUDE=(SYS$DISK:[-],SYS$DISK:[-.CRYPTO])" + CCEXTRAFLAGS
 $     CCDEFS = CCDEFS + ",""VAXC"""
 $!
 $!    Define <sys> As SYS$COMMON:[SYSLIB]
@@ -743,7 +743,7 @@ $!    Use GNU C...
 $!
 $     IF F$TYPE(GCC) .EQS. "" THEN GCC := GCC
 $     CC = GCC+"/NOCASE_HACK/''GCC_OPTIMIZE'/''DEBUGGER'/NOLIST" + -
-	   "/INCLUDE=(SYS$DISK:[-])" + CCEXTRAFLAGS
+	   "/INCLUDE=(SYS$DISK:[-],SYS$DISK:[-.CRYPTO])" + CCEXTRAFLAGS
 $!
 $!    Define The Linker Options File Name.
 $!

apps/nseq.c

@@ -102,7 +102,7 @@ int MAIN(int argc, char **argv)
 		BIO_printf (bio_err, "-in file  input file\n");
 		BIO_printf (bio_err, "-out file output file\n");
 		BIO_printf (bio_err, "-toseq    output NS Sequence file\n");
-		EXIT(1);
+		OPENSSL_EXIT(1);
 	}
 
 	if (infile) {
@@ -162,6 +162,6 @@ end:
 	BIO_free_all(out);
 	NETSCAPE_CERT_SEQUENCE_free(seq);
 
-	EXIT(ret);
+	OPENSSL_EXIT(ret);
 }
 

apps/ocsp.c

@@ -55,6 +55,7 @@
  * Hudson (tjh@cryptsoft.com).
  *
  */
+#ifndef OPENSSL_NO_OCSP
 
 #include <stdio.h>
 #include <string.h>
@@ -67,19 +68,6 @@
 /* Maximum leeway in validity period: default 5 minutes */
 #define MAX_VALIDITY_PERIOD	(5 * 60)
 
-/* CA index.txt definitions */
-#define DB_type         0
-#define DB_exp_date     1
-#define DB_rev_date     2
-#define DB_serial       3       /* index - unique */
-#define DB_file         4       
-#define DB_name         5       /* index - unique for active */
-#define DB_NUMBER       6
-
-#define DB_TYPE_REV	'R'
-#define DB_TYPE_EXP	'E'
-#define DB_TYPE_VAL	'V'
-
 static int add_ocsp_cert(OCSP_REQUEST **req, X509 *cert, X509 *issuer,
 				STACK_OF(OCSP_CERTID) *ids);
 static int add_ocsp_serial(OCSP_REQUEST **req, char *serial, X509 *issuer,
@@ -88,12 +76,12 @@ static int print_ocsp_summary(BIO *out, OCSP_BASICRESP *bs, OCSP_REQUEST *req,
 				STACK *names, STACK_OF(OCSP_CERTID) *ids,
 				long nsec, long maxage);
 
-static int make_ocsp_response(OCSP_RESPONSE **resp, OCSP_REQUEST *req, TXT_DB *db,
+static int make_ocsp_response(OCSP_RESPONSE **resp, OCSP_REQUEST *req, CA_DB *db,
 			X509 *ca, X509 *rcert, EVP_PKEY *rkey,
 			STACK_OF(X509) *rother, unsigned long flags,
 			int nmin, int ndays);
 
-static char **lookup_serial(TXT_DB *db, ASN1_INTEGER *ser);
+static char **lookup_serial(CA_DB *db, ASN1_INTEGER *ser);
 static BIO *init_responder(char *port);
 static int do_responder(OCSP_REQUEST **preq, BIO **pcbio, BIO *acbio, char *port);
 static int send_ocsp_response(BIO *cbio, OCSP_RESPONSE *resp);
@@ -135,13 +123,14 @@ int MAIN(int argc, char **argv)
 	int accept_count = -1;
 	int badarg = 0;
 	int i;
+	int ignore_err = 0;
 	STACK *reqnames = NULL;
 	STACK_OF(OCSP_CERTID) *ids = NULL;
 
 	X509 *rca_cert = NULL;
 	char *ridx_filename = NULL;
 	char *rca_filename = NULL;
-	TXT_DB *rdb = NULL;
+	CA_DB *rdb = NULL;
 	int nmin = 0, ndays = -1;
 
 	if (bio_err == NULL) bio_err = BIO_new_fp(stderr, BIO_NOCLOSE);
@@ -194,6 +183,8 @@ int MAIN(int argc, char **argv)
 				}
 			else badarg = 1;
 			}
+		else if (!strcmp(*args, "-ignore_err"))
+			ignore_err = 1;
 		else if (!strcmp(*args, "-noverify"))
 			noverify = 1;
 		else if (!strcmp(*args, "-nonce"))
@@ -523,7 +514,7 @@ int MAIN(int argc, char **argv)
 		BIO_printf (bio_err, "-serial n          serial number to check\n");
 		BIO_printf (bio_err, "-signer file       certificate to sign OCSP request with\n");
 		BIO_printf (bio_err, "-signkey file      private key to sign OCSP request with\n");
-		BIO_printf (bio_err, "-sign_certs file   additional certificates to include in signed request\n");
+		BIO_printf (bio_err, "-sign_other file   additional certificates to include in signed request\n");
 		BIO_printf (bio_err, "-no_certs          don't include any certificates in signed request\n");
 		BIO_printf (bio_err, "-req_text          print text form of request\n");
 		BIO_printf (bio_err, "-resp_text         print text form of response\n");
@@ -543,10 +534,10 @@ int MAIN(int argc, char **argv)
 		BIO_printf (bio_err, "-validity_period n maximum validity discrepancy in seconds\n");
 		BIO_printf (bio_err, "-status_age n      maximum status age in seconds\n");
 		BIO_printf (bio_err, "-noverify          don't verify response at all\n");
-		BIO_printf (bio_err, "-verify_certs file additional certificates to search for signer\n");
+		BIO_printf (bio_err, "-verify_other file additional certificates to search for signer\n");
 		BIO_printf (bio_err, "-trust_other       don't verify additional certificates\n");
 		BIO_printf (bio_err, "-no_intern         don't search certificates contained in response for signer\n");
-		BIO_printf (bio_err, "-no_sig_verify     don't check signature on response\n");
+		BIO_printf (bio_err, "-no_signature_verify don't check signature on response\n");
 		BIO_printf (bio_err, "-no_cert_verify    don't check signing certificate\n");
 		BIO_printf (bio_err, "-no_chain          don't chain verify response\n");
 		BIO_printf (bio_err, "-no_cert_checks    don't do additional checks on signing certificate\n");
@@ -696,22 +687,9 @@ int MAIN(int argc, char **argv)
 
 	if (ridx_filename && !rdb)
 		{
-		BIO *db_bio = NULL;
-		db_bio = BIO_new_file(ridx_filename, "r");
-		if (!db_bio)
-			{
-			BIO_printf(bio_err, "Error opening index file %s\n", ridx_filename);
-			goto end;
-			}
-		rdb = TXT_DB_read(db_bio, DB_NUMBER);
-		BIO_free(db_bio);
-		if (!rdb)
-			{
-			BIO_printf(bio_err, "Error reading index file %s\n", ridx_filename);
-			goto end;
-			}
-		if (!make_serial_index(rdb))
-			goto end;
+		rdb = load_index(ridx_filename, NULL);
+		if (!rdb) goto end;
+		if (!index_index(rdb)) goto end;
 		}
 
 	if (rdb)
@@ -722,7 +700,12 @@ int MAIN(int argc, char **argv)
 		}
 	else if (host)
 		{
+#ifndef OPENSSL_NO_SOCK
 		cbio = BIO_new_connect(host);
+#else
+		BIO_printf(bio_err, "Error creating connect BIO - sockets not supported.\n");
+		goto end;
+#endif
 		if (!cbio)
 			{
 			BIO_printf(bio_err, "Error creating connect BIO\n");
@@ -732,7 +715,16 @@ int MAIN(int argc, char **argv)
 		if (use_ssl == 1)
 			{
 			BIO *sbio;
+#if !defined(OPENSSL_NO_SSL2) && !defined(OPENSSL_NO_SSL3)
 			ctx = SSL_CTX_new(SSLv23_client_method());
+#elif !defined(OPENSSL_NO_SSL3)
+			ctx = SSL_CTX_new(SSLv3_client_method());
+#elif !defined(OPENSSL_NO_SSL2)
+			ctx = SSL_CTX_new(SSLv2_client_method());
+#else
+			BIO_printf(bio_err, "SSL is disabled\n");
+			goto end;
+#endif
 			SSL_CTX_set_mode(ctx, SSL_MODE_AUTO_RETRY);
 			sbio = BIO_new_ssl(ctx, 1);
 			cbio = BIO_push(sbio, cbio);
@@ -794,6 +786,8 @@ int MAIN(int argc, char **argv)
 		{
 		BIO_printf(out, "Responder Error: %s (%ld)\n",
 				OCSP_response_status_str(i), i);
+		if (ignore_err)
+			goto redo_accept;
 		ret = 0;
 		goto end;
 		}
@@ -879,7 +873,7 @@ end:
 	X509_free(cert);
 	X509_free(rsigner);
 	X509_free(rca_cert);
-	TXT_DB_free(rdb);
+	free_index(rdb);
 	BIO_free_all(cbio);
 	BIO_free_all(acbio);
 	BIO_free(out);
@@ -899,7 +893,7 @@ end:
 		SSL_CTX_free(ctx);
 		}
 
-	EXIT(ret);
+	OPENSSL_EXIT(ret);
 }
 
 static int add_ocsp_cert(OCSP_REQUEST **req, X509 *cert, X509 *issuer,
@@ -1021,7 +1015,7 @@ static int print_ocsp_summary(BIO *out, OCSP_BASICRESP *bs, OCSP_REQUEST *req,
 	}
 
 
-static int make_ocsp_response(OCSP_RESPONSE **resp, OCSP_REQUEST *req, TXT_DB *db,
+static int make_ocsp_response(OCSP_RESPONSE **resp, OCSP_REQUEST *req, CA_DB *db,
 			X509 *ca, X509 *rcert, EVP_PKEY *rkey,
 			STACK_OF(X509) *rother, unsigned long flags,
 			int nmin, int ndays)
@@ -1113,7 +1107,7 @@ static int make_ocsp_response(OCSP_RESPONSE **resp, OCSP_REQUEST *req, TXT_DB *d
 
 	}
 
-static char **lookup_serial(TXT_DB *db, ASN1_INTEGER *ser)
+static char **lookup_serial(CA_DB *db, ASN1_INTEGER *ser)
 	{
 	int i;
 	BIGNUM *bn = NULL;
@@ -1126,7 +1120,7 @@ static char **lookup_serial(TXT_DB *db, ASN1_INTEGER *ser)
 		itmp = BN_bn2hex(bn);
 	row[DB_serial] = itmp;
 	BN_free(bn);
-	rrow=TXT_DB_get_by_index(db,DB_serial,row);
+	rrow=TXT_DB_get_by_index(db->db,DB_serial,row);
 	OPENSSL_free(itmp);
 	return rrow;
 	}
@@ -1139,7 +1133,11 @@ static BIO *init_responder(char *port)
 	bufbio = BIO_new(BIO_f_buffer());
 	if (!bufbio) 
 		goto err;
+#ifndef OPENSSL_NO_SOCK
 	acbio = BIO_new_accept(port);
+#else
+	BIO_printf(bio_err, "Error setting up accept BIO - sockets not supported.\n");
+#endif
 	if (!acbio)
 		goto err;
 	BIO_set_accept_bios(acbio, bufbio);
@@ -1226,3 +1224,4 @@ static int send_ocsp_response(BIO *cbio, OCSP_RESPONSE *resp)
 	return 1;
 	}
 
+#endif

apps/openssl-vms.cnf

@@ -3,8 +3,13 @@
 # This is mostly being used for generation of certificate requests.
 #
 
+# This definition stops the following lines choking if HOME isn't
+# defined.
+HOME			= .
 RANDFILE		= $ENV::HOME/.rnd
-oid_file		= $ENV::HOME/.oid
+
+# Extra OBJECT IDENTIFIER info:
+#oid_file		= $ENV::HOME/.oid
 oid_section		= new_oids
 
 # To use this configuration file with the "-extfile" option of the
@@ -29,22 +34,35 @@ default_ca	= CA_default		# The default ca section
 ####################################################################
 [ CA_default ]
 
-dir		= sys\$disk:[.demoCA	# Where everything is kept
+dir		= sys\$disk:[.demoCA		# Where everything is kept
 certs		= $dir.certs]		# Where the issued certs are kept
 crl_dir		= $dir.crl]		# Where the issued crl are kept
 database	= $dir]index.txt	# database index file.
-new_certs_dir	= $dir.newcerts]	# default place for new certs.
+#unique_subject	= no			# Set to 'no' to allow creation of
+					# several ctificates with same subject.
+new_certs_dir	= $dir.newcerts]		# default place for new certs.
 
 certificate	= $dir]cacert.pem 	# The CA certificate
-serial		= $dir]serial.		# The current serial number
+serial		= $dir]serial. 		# The current serial number
+#crlnumber	= $dir]crlnumber.	# the current crl number must be
+					# commented out to leave a V1 CRL
 crl		= $dir]crl.pem 		# The current CRL
 private_key	= $dir.private]cakey.pem# The private key
 RANDFILE	= $dir.private].rand	# private random number file
 
 x509_extensions	= usr_cert		# The extentions to add to the cert
 
+# Comment out the following two lines for the "traditional"
+# (and highly broken) format.
+name_opt 	= ca_default		# Subject Name options
+cert_opt 	= ca_default		# Certificate field options
+
+# Extension copying option: use with caution.
+# copy_extensions = copy
+
 # Extensions to add to a CRL. Note: Netscape communicator chokes on V2 CRLs
 # so this is commented out by default to leave a V1 CRL.
+# crlnumber must also be commented out to leave a V1 CRL.
 # crl_extensions	= crl_ext
 
 default_days	= 365			# how long to certify for
@@ -86,16 +104,19 @@ distinguished_name	= req_distinguished_name
 attributes		= req_attributes
 x509_extensions	= v3_ca	# The extentions to add to the self signed cert
 
-# This sets the permitted types in a DirectoryString. There are several
-# options. 
+# Passwords for private keys if not present they will be prompted for
+# input_password = secret
+# output_password = secret
+
+# This sets a mask for permitted string types. There are several options. 
 # default: PrintableString, T61String, BMPString.
 # pkix	 : PrintableString, BMPString.
 # utf8only: only UTF8Strings.
-# nobmp : PrintableString, T61String (no BMPStrings).
+# nombstr : PrintableString, T61String (no BMPStrings or UTF8Strings).
 # MASK:XXXX a literal mask value.
 # WARNING: current versions of Netscape crash on BMPStrings or UTF8Strings
 # so use this option with caution!
-dirstring_type = nobmp
+string_mask = nombstr
 
 # req_extensions = v3_req # The extensions to add to a certificate request
 
@@ -124,7 +145,7 @@ commonName			= Common Name (eg, YOUR name)
 commonName_max			= 64
 
 emailAddress			= Email Address
-emailAddress_max		= 40
+emailAddress_max		= 64
 
 # SET-ex3			= SET extension number 3
 
@@ -172,6 +193,9 @@ authorityKeyIdentifier=keyid,issuer:always
 # This stuff is for subjectAltName and issuerAltname.
 # Import the email address.
 # subjectAltName=email:copy
+# An alternative to produce certificates that aren't
+# deprecated according to PKIX.
+# subjectAltName=email:move
 
 # Copy subject details
 # issuerAltName=issuer:copy
@@ -234,3 +258,56 @@ basicConstraints = CA:true
 
 # issuerAltName=issuer:copy
 authorityKeyIdentifier=keyid:always,issuer:always
+
+[ proxy_cert_ext ]
+# These extensions should be added when creating a proxy certificate
+
+# This goes against PKIX guidelines but some CAs do it and some software
+# requires this to avoid interpreting an end user certificate as a CA.
+
+basicConstraints=CA:FALSE
+
+# Here are some examples of the usage of nsCertType. If it is omitted
+# the certificate can be used for anything *except* object signing.
+
+# This is OK for an SSL server.
+# nsCertType			= server
+
+# For an object signing certificate this would be used.
+# nsCertType = objsign
+
+# For normal client use this is typical
+# nsCertType = client, email
+
+# and for everything including object signing:
+# nsCertType = client, email, objsign
+
+# This is typical in keyUsage for a client certificate.
+# keyUsage = nonRepudiation, digitalSignature, keyEncipherment
+
+# This will be displayed in Netscape's comment listbox.
+nsComment			= "OpenSSL Generated Certificate"
+
+# PKIX recommendations harmless if included in all certificates.
+subjectKeyIdentifier=hash
+authorityKeyIdentifier=keyid,issuer:always
+
+# This stuff is for subjectAltName and issuerAltname.
+# Import the email address.
+# subjectAltName=email:copy
+# An alternative to produce certificates that aren't
+# deprecated according to PKIX.
+# subjectAltName=email:move
+
+# Copy subject details
+# issuerAltName=issuer:copy
+
+#nsCaRevocationUrl		= http://www.domain.dom/ca-crl.pem
+#nsBaseUrl
+#nsRevocationUrl
+#nsRenewalUrl
+#nsCaPolicyUrl
+#nsSslServerName
+
+# This really needs to be in place for it to be a proxy certificate.
+proxyCertInfo=critical,language:id-ppl-anyLanguage,pathlen:3,policy:foo

apps/openssl.c

@@ -122,11 +122,14 @@
 #include <openssl/x509.h>
 #include <openssl/pem.h>
 #include <openssl/ssl.h>
+#ifndef OPENSSL_NO_ENGINE
 #include <openssl/engine.h>
+#endif
 #define USE_SOCKETS /* needed for the _O_BINARY defs in the MS world */
 #include "progs.h"
 #include "s_apps.h"
 #include <openssl/err.h>
+#include <openssl/fips.h>
 
 /* The LHASH callbacks ("hash" & "cmp") have been replaced by functions with the
  * base prototypes (we cast each variable inside the function to the required
@@ -145,6 +148,7 @@ char *default_config_file=NULL;
 #ifdef MONOLITH
 CONF *config=NULL;
 BIO *bio_err=NULL;
+int in_FIPS_mode=0;
 #endif
 
 
@@ -161,7 +165,7 @@ static void lock_dbg_cb(int mode, int type, const char *file, int line)
 		goto err;
 		}
 
-	if (type < 0 || type > CRYPTO_NUM_LOCKS)
+	if (type < 0 || type >= CRYPTO_NUM_LOCKS)
 		{
 		errstr = "type out of bounds";
 		goto err;
@@ -225,10 +229,22 @@ int main(int Argc, char *Argv[])
 	char **argv,*p;
 	LHASH *prog=NULL;
 	long errline;
- 
+
 	arg.data=NULL;
 	arg.count=0;
 
+	in_FIPS_mode = 0;
+
+#ifdef OPENSSL_FIPS
+	if(getenv("OPENSSL_FIPS")) {
+		if (!FIPS_mode_set(1)) {
+			ERR_load_crypto_strings();
+			ERR_print_errors(BIO_new_fp(stderr,BIO_NOCLOSE));
+			EXIT(1);
+		}
+		in_FIPS_mode = 1;
+		}
+#endif
 	if (bio_err == NULL)
 		if ((bio_err=BIO_new(BIO_s_file())) != NULL)
 			BIO_set_fp(bio_err,stderr,BIO_NOCLOSE|BIO_FP_TEXT);
@@ -358,7 +374,7 @@ end:
 		BIO_free(bio_err);
 		bio_err=NULL;
 		}
-	EXIT(ret);
+	OPENSSL_EXIT(ret);
 	}
 
 #define LIST_STANDARD_COMMANDS "list-standard-commands"

apps/openssl.cnf

@@ -38,10 +38,14 @@ dir		= ./demoCA		# Where everything is kept
 certs		= $dir/certs		# Where the issued certs are kept
 crl_dir		= $dir/crl		# Where the issued crl are kept
 database	= $dir/index.txt	# database index file.
+#unique_subject	= no			# Set to 'no' to allow creation of
+					# several ctificates with same subject.
 new_certs_dir	= $dir/newcerts		# default place for new certs.
 
 certificate	= $dir/cacert.pem 	# The CA certificate
 serial		= $dir/serial 		# The current serial number
+#crlnumber	= $dir/crlnumber	# the current crl number must be
+					# commented out to leave a V1 CRL
 crl		= $dir/crl.pem 		# The current CRL
 private_key	= $dir/private/cakey.pem# The private key
 RANDFILE	= $dir/private/.rand	# private random number file
@@ -58,6 +62,7 @@ cert_opt 	= ca_default		# Certificate field options
 
 # Extensions to add to a CRL. Note: Netscape communicator chokes on V2 CRLs
 # so this is commented out by default to leave a V1 CRL.
+# crlnumber must also be commented out to leave a V1 CRL.
 # crl_extensions	= crl_ext
 
 default_days	= 365			# how long to certify for
@@ -253,3 +258,56 @@ basicConstraints = CA:true
 
 # issuerAltName=issuer:copy
 authorityKeyIdentifier=keyid:always,issuer:always
+
+[ proxy_cert_ext ]
+# These extensions should be added when creating a proxy certificate
+
+# This goes against PKIX guidelines but some CAs do it and some software
+# requires this to avoid interpreting an end user certificate as a CA.
+
+basicConstraints=CA:FALSE
+
+# Here are some examples of the usage of nsCertType. If it is omitted
+# the certificate can be used for anything *except* object signing.
+
+# This is OK for an SSL server.
+# nsCertType			= server
+
+# For an object signing certificate this would be used.
+# nsCertType = objsign
+
+# For normal client use this is typical
+# nsCertType = client, email
+
+# and for everything including object signing:
+# nsCertType = client, email, objsign
+
+# This is typical in keyUsage for a client certificate.
+# keyUsage = nonRepudiation, digitalSignature, keyEncipherment
+
+# This will be displayed in Netscape's comment listbox.
+nsComment			= "OpenSSL Generated Certificate"
+
+# PKIX recommendations harmless if included in all certificates.
+subjectKeyIdentifier=hash
+authorityKeyIdentifier=keyid,issuer:always
+
+# This stuff is for subjectAltName and issuerAltname.
+# Import the email address.
+# subjectAltName=email:copy
+# An alternative to produce certificates that aren't
+# deprecated according to PKIX.
+# subjectAltName=email:move
+
+# Copy subject details
+# issuerAltName=issuer:copy
+
+#nsCaRevocationUrl		= http://www.domain.dom/ca-crl.pem
+#nsBaseUrl
+#nsRevocationUrl
+#nsRenewalUrl
+#nsCaPolicyUrl
+#nsSslServerName
+
+# This really needs to be in place for it to be a proxy certificate.
+proxyCertInfo=critical,language:id-ppl-anyLanguage,pathlen:3,policy:foo

apps/passwd.c

@@ -292,7 +292,7 @@ err:
 	if (out)
 		BIO_free_all(out);
 	apps_shutdown();
-	EXIT(ret);
+	OPENSSL_EXIT(ret);
 	}
 
 
@@ -505,6 +505,6 @@ err:
 int MAIN(int argc, char **argv)
 	{
 	fputs("Program not available.\n", stderr)
-	EXIT(1);
+	OPENSSL_EXIT(1);
 	}
 #endif

apps/pkcs12.c

@@ -109,7 +109,7 @@ int MAIN(int argc, char **argv)
     int maciter = PKCS12_DEFAULT_ITER;
     int twopass = 0;
     int keytype = 0;
-    int cert_pbe = NID_pbe_WithSHA1And40BitRC2_CBC;
+    int cert_pbe;
     int key_pbe = NID_pbe_WithSHA1And3_Key_TripleDES_CBC;
     int ret = 1;
     int macver = 1;
@@ -120,10 +120,19 @@ int MAIN(int argc, char **argv)
     char *passin = NULL, *passout = NULL;
     char *inrand = NULL;
     char *CApath = NULL, *CAfile = NULL;
+#ifndef OPENSSL_NO_ENGINE
     char *engine=NULL;
+#endif
 
     apps_startup();
 
+#ifdef OPENSSL_FIPS
+    if (FIPS_mode())
+	cert_pbe = NID_pbe_WithSHA1And3_Key_TripleDES_CBC;
+    else
+#endif
+    cert_pbe = NID_pbe_WithSHA1And40BitRC2_CBC;
+
     enc = EVP_des_ede3_cbc();
     if (bio_err == NULL ) bio_err = BIO_new_fp (stderr, BIO_NOCLOSE);
 
@@ -252,11 +261,13 @@ int MAIN(int argc, char **argv)
 			args++;	
 			CAfile = *args;
 		    } else badarg = 1;
+#ifndef OPENSSL_NO_ENGINE
 		} else if (!strcmp(*args,"-engine")) {
 		    if (args[1]) {
 			args++;	
 			engine = *args;
 		    } else badarg = 1;
+#endif
 		} else badarg = 1;
 
 	} else badarg = 1;
@@ -304,14 +315,18 @@ int MAIN(int argc, char **argv)
 	BIO_printf (bio_err, "-password p   set import/export password source\n");
 	BIO_printf (bio_err, "-passin p     input file pass phrase source\n");
 	BIO_printf (bio_err, "-passout p    output file pass phrase source\n");
+#ifndef OPENSSL_NO_ENGINE
 	BIO_printf (bio_err, "-engine e     use engine e, possibly a hardware device.\n");
+#endif
 	BIO_printf(bio_err,  "-rand file%cfile%c...\n", LIST_SEPARATOR_CHAR, LIST_SEPARATOR_CHAR);
 	BIO_printf(bio_err,  "              load the file (or the files in the directory) into\n");
 	BIO_printf(bio_err,  "              the random number generator\n");
     	goto end;
     }
 
+#ifndef OPENSSL_NO_ENGINE
     e = setup_engine(bio_err, engine, 0);
+#endif
 
     if(passarg) {
 	if(export_cert) passargout = passarg;
@@ -549,7 +564,7 @@ int MAIN(int argc, char **argv)
 	    BIO_printf (bio_err, "Can't read Password\n");
 	    goto export_end;
         }
-	if (!twopass) strcpy(macpass, pass);
+	if (!twopass) BUF_strlcpy(macpass, pass, sizeof macpass);
 	/* Turn certbags into encrypted authsafe */
 	authsafe = PKCS12_pack_p7encdata(cert_pbe, cpass, -1, NULL, 0,
 								 iter, bags);
@@ -650,7 +665,7 @@ int MAIN(int argc, char **argv)
     CRYPTO_pop_info();
 #endif
 
-    if (!twopass) strcpy(macpass, pass);
+    if (!twopass) BUF_strlcpy(macpass, pass, sizeof macpass);
 
     if (options & INFO) BIO_printf (bio_err, "MAC Iteration %ld\n", p12->mac->iter ? ASN1_INTEGER_get (p12->mac->iter) : 1);
     if(macver) {
@@ -658,7 +673,7 @@ int MAIN(int argc, char **argv)
     CRYPTO_push_info("verify MAC");
 #endif
 	/* If we enter empty password try no password first */
-	if(!macpass[0] && PKCS12_verify_mac(p12, NULL, 0)) {
+	if(!mpass[0] && PKCS12_verify_mac(p12, NULL, 0)) {
 		/* If mac and crypto pass the same set it to NULL too */
 		if(!twopass) cpass = NULL;
 	} else if (!PKCS12_verify_mac(p12, mpass, -1)) {
@@ -696,15 +711,16 @@ int MAIN(int argc, char **argv)
     if(passin) OPENSSL_free(passin);
     if(passout) OPENSSL_free(passout);
     apps_shutdown();
-    EXIT(ret);
+    OPENSSL_EXIT(ret);
 }
 
 int dump_certs_keys_p12 (BIO *out, PKCS12 *p12, char *pass,
 	     int passlen, int options, char *pempass)
 {
-	STACK_OF(PKCS7) *asafes;
+	STACK_OF(PKCS7) *asafes = NULL;
 	STACK_OF(PKCS12_SAFEBAG) *bags;
 	int i, bagnid;
+	int ret = 0;
 	PKCS7 *p7;
 
 	if (!( asafes = PKCS12_unpack_authsafes(p12))) return 0;
@@ -722,16 +738,22 @@ int dump_certs_keys_p12 (BIO *out, PKCS12 *p12, char *pass,
 			}
 			bags = PKCS12_unpack_p7encdata(p7, pass, passlen);
 		} else continue;
-		if (!bags) return 0;
+		if (!bags) goto err;
 	    	if (!dump_certs_pkeys_bags (out, bags, pass, passlen, 
 						 options, pempass)) {
 			sk_PKCS12_SAFEBAG_pop_free (bags, PKCS12_SAFEBAG_free);
-			return 0;
+			goto err;
 		}
 		sk_PKCS12_SAFEBAG_pop_free (bags, PKCS12_SAFEBAG_free);
+		bags = NULL;
 	}
-	sk_PKCS7_pop_free (asafes, PKCS7_free);
-	return 1;
+	ret = 1;
+
+	err:
+
+	if (asafes)
+		sk_PKCS7_pop_free (asafes, PKCS7_free);
+	return ret;
 }
 
 int dump_certs_pkeys_bags (BIO *out, STACK_OF(PKCS12_SAFEBAG) *bags,

apps/pkcs7.c

@@ -82,7 +82,9 @@ int MAIN(int, char **);
 
 int MAIN(int argc, char **argv)
 	{
+#ifndef OPENSSL_NO_ENGINE
 	ENGINE *e = NULL;
+#endif
 	PKCS7 *p7=NULL;
 	int i,badops=0;
 	BIO *in=NULL,*out=NULL;
@@ -90,7 +92,9 @@ int MAIN(int argc, char **argv)
 	char *infile,*outfile,*prog;
 	int print_certs=0,text=0,noout=0;
 	int ret=1;
+#ifndef OPENSSL_NO_ENGINE
 	char *engine=NULL;
+#endif
 
 	apps_startup();
 
@@ -98,6 +102,9 @@ int MAIN(int argc, char **argv)
 		if ((bio_err=BIO_new(BIO_s_file())) != NULL)
 			BIO_set_fp(bio_err,stderr,BIO_NOCLOSE|BIO_FP_TEXT);
 
+	if (!load_config(bio_err, NULL))
+		goto end;
+
 	infile=NULL;
 	outfile=NULL;
 	informat=FORMAT_PEM;
@@ -134,11 +141,13 @@ int MAIN(int argc, char **argv)
 			text=1;
 		else if (strcmp(*argv,"-print_certs") == 0)
 			print_certs=1;
+#ifndef OPENSSL_NO_ENGINE
 		else if (strcmp(*argv,"-engine") == 0)
 			{
 			if (--argc < 1) goto bad;
 			engine= *(++argv);
 			}
+#endif
 		else
 			{
 			BIO_printf(bio_err,"unknown option %s\n",*argv);
@@ -161,14 +170,18 @@ bad:
 		BIO_printf(bio_err," -print_certs  print any certs or crl in the input\n");
 		BIO_printf(bio_err," -text         print full details of certificates\n");
 		BIO_printf(bio_err," -noout        don't output encoded data\n");
+#ifndef OPENSSL_NO_ENGINE
 		BIO_printf(bio_err," -engine e     use engine e, possibly a hardware device.\n");
+#endif
 		ret = 1;
 		goto end;
 		}
 
 	ERR_load_crypto_strings();
 
+#ifndef OPENSSL_NO_ENGINE
         e = setup_engine(bio_err, engine, 0);
+#endif
 
 	in=BIO_new(BIO_s_file());
 	out=BIO_new(BIO_s_file());
@@ -301,5 +314,5 @@ end:
 	if (in != NULL) BIO_free(in);
 	if (out != NULL) BIO_free_all(out);
 	apps_shutdown();
-	EXIT(ret);
+	OPENSSL_EXIT(ret);
 	}

apps/pkcs8.c

@@ -1,6 +1,6 @@
 /* pkcs8.c */
 /* Written by Dr Stephen N Henson (shenson@bigfoot.com) for the OpenSSL
- * project 1999.
+ * project 1999-2004.
  */
 /* ====================================================================
  * Copyright (c) 1999 The OpenSSL Project.  All rights reserved.
@@ -68,7 +68,7 @@
 int MAIN(int, char **);
 
 int MAIN(int argc, char **argv)
-{
+	{
 	ENGINE *e = NULL;
 	char **args, *infile = NULL, *outfile = NULL;
 	char *passargin = NULL, *passargout = NULL;
@@ -85,7 +85,9 @@ int MAIN(int argc, char **argv)
 	EVP_PKEY *pkey=NULL;
 	char pass[50], *passin = NULL, *passout = NULL, *p8pass = NULL;
 	int badarg = 0;
+#ifndef OPENSSL_NO_ENGINE
 	char *engine=NULL;
+#endif
 
 	if (bio_err == NULL) bio_err = BIO_new_fp (stderr, BIO_NOCLOSE);
 
@@ -98,43 +100,70 @@ int MAIN(int argc, char **argv)
 	ERR_load_crypto_strings();
 	OpenSSL_add_all_algorithms();
 	args = argv + 1;
-	while (!badarg && *args && *args[0] == '-') {
-		if (!strcmp(*args,"-v2")) {
-			if (args[1]) {
+	while (!badarg && *args && *args[0] == '-')
+		{
+		if (!strcmp(*args,"-v2"))
+			{
+			if (args[1])
+				{
 				args++;
 				cipher=EVP_get_cipherbyname(*args);
-				if(!cipher) {
+				if (!cipher)
+					{
 					BIO_printf(bio_err,
 						 "Unknown cipher %s\n", *args);
 					badarg = 1;
+					}
 				}
-			} else badarg = 1;
-		} else if (!strcmp(*args,"-v1")) {
-			if (args[1]) {
+			else
+				badarg = 1;
+			}
+		else if (!strcmp(*args,"-v1"))
+			{
+			if (args[1])
+				{
 				args++;
 				pbe_nid=OBJ_txt2nid(*args);
-				if(pbe_nid == NID_undef) {
+				if (pbe_nid == NID_undef)
+					{
 					BIO_printf(bio_err,
 						 "Unknown PBE algorithm %s\n", *args);
 					badarg = 1;
+					}
 				}
-			} else badarg = 1;
-		} else if (!strcmp(*args,"-inform")) {
-			if (args[1]) {
+			else
+				badarg = 1;
+			}
+		else if (!strcmp(*args,"-inform"))
+			{
+			if (args[1])
+				{
 				args++;
 				informat=str2fmt(*args);
-			} else badarg = 1;
-		} else if (!strcmp(*args,"-outform")) {
-			if (args[1]) {
+				}
+			else badarg = 1;
+			}
+		else if (!strcmp(*args,"-outform"))
+			{
+			if (args[1])
+				{
 				args++;
 				outformat=str2fmt(*args);
-			} else badarg = 1;
-		} else if (!strcmp (*args, "-topk8")) topk8 = 1;
-		else if (!strcmp (*args, "-noiter")) iter = 1;
-		else if (!strcmp (*args, "-nocrypt")) nocrypt = 1;
-		else if (!strcmp (*args, "-nooct")) p8_broken = PKCS8_NO_OCTET;
-		else if (!strcmp (*args, "-nsdb")) p8_broken = PKCS8_NS_DB;
-		else if (!strcmp (*args, "-embed")) p8_broken = PKCS8_EMBEDDED_PARAM;
+				}
+			else badarg = 1;
+			}
+		else if (!strcmp (*args, "-topk8"))
+			topk8 = 1;
+		else if (!strcmp (*args, "-noiter"))
+			iter = 1;
+		else if (!strcmp (*args, "-nocrypt"))
+			nocrypt = 1;
+		else if (!strcmp (*args, "-nooct"))
+			p8_broken = PKCS8_NO_OCTET;
+		else if (!strcmp (*args, "-nsdb"))
+			p8_broken = PKCS8_NS_DB;
+		else if (!strcmp (*args, "-embed"))
+			p8_broken = PKCS8_EMBEDDED_PARAM;
 		else if (!strcmp(*args,"-passin"))
 			{
 			if (!args[1]) goto bad;
@@ -145,26 +174,37 @@ int MAIN(int argc, char **argv)
 			if (!args[1]) goto bad;
 			passargout= *(++args);
 			}
+#ifndef OPENSSL_NO_ENGINE
 		else if (strcmp(*args,"-engine") == 0)
 			{
 			if (!args[1]) goto bad;
 			engine= *(++args);
 			}
-		else if (!strcmp (*args, "-in")) {
-			if (args[1]) {
+#endif
+		else if (!strcmp (*args, "-in"))
+			{
+			if (args[1])
+				{
 				args++;
 				infile = *args;
-			} else badarg = 1;
-		} else if (!strcmp (*args, "-out")) {
-			if (args[1]) {
+				}
+			else badarg = 1;
+			}
+		else if (!strcmp (*args, "-out"))
+			{
+			if (args[1])
+				{
 				args++;
 				outfile = *args;
-			} else badarg = 1;
-		} else badarg = 1;
+				}
+			else badarg = 1;
+			}
+		else badarg = 1;
 		args++;
-	}
+		}
 
-	if (badarg) {
+	if (badarg)
+		{
 		bad:
 		BIO_printf(bio_err, "Usage pkcs8 [options]\n");
 		BIO_printf(bio_err, "where options are\n");
@@ -182,147 +222,202 @@ int MAIN(int argc, char **argv)
 		BIO_printf(bio_err, "-nocrypt        use or expect unencrypted private key\n");
 		BIO_printf(bio_err, "-v2 alg         use PKCS#5 v2.0 and cipher \"alg\"\n");
 		BIO_printf(bio_err, "-v1 obj         use PKCS#5 v1.5 and cipher \"alg\"\n");
+#ifndef OPENSSL_NO_ENGINE
 		BIO_printf(bio_err," -engine e       use engine e, possibly a hardware device.\n");
-		return (1);
-	}
+#endif
+		return 1;
+		}
 
+#ifndef OPENSSL_NO_ENGINE
         e = setup_engine(bio_err, engine, 0);
+#endif
 
-	if(!app_passwd(bio_err, passargin, passargout, &passin, &passout)) {
+	if (!app_passwd(bio_err, passargin, passargout, &passin, &passout))
+		{
 		BIO_printf(bio_err, "Error getting passwords\n");
-		return (1);
-	}
+		return 1;
+		}
 
-	if ((pbe_nid == -1) && !cipher) pbe_nid = NID_pbeWithMD5AndDES_CBC;
+	if ((pbe_nid == -1) && !cipher)
+		pbe_nid = NID_pbeWithMD5AndDES_CBC;
 
-	if (infile) {
-		if (!(in = BIO_new_file(infile, "rb"))) {
+	if (infile)
+		{
+		if (!(in = BIO_new_file(infile, "rb")))
+			{
 			BIO_printf(bio_err,
 				 "Can't open input file %s\n", infile);
 			return (1);
+			}
 		}
-	} else in = BIO_new_fp (stdin, BIO_NOCLOSE);
+	else
+		in = BIO_new_fp (stdin, BIO_NOCLOSE);
 
-	if (outfile) {
-		if (!(out = BIO_new_file (outfile, "wb"))) {
+	if (outfile)
+		{
+		if (!(out = BIO_new_file (outfile, "wb")))
+			{
 			BIO_printf(bio_err,
 				 "Can't open output file %s\n", outfile);
 			return (1);
+			}
 		}
-	} else {
+	else
+		{
 		out = BIO_new_fp (stdout, BIO_NOCLOSE);
 #ifdef OPENSSL_SYS_VMS
-		{
+			{
 			BIO *tmpbio = BIO_new(BIO_f_linebuffer());
 			out = BIO_push(tmpbio, out);
-		}
+			}
 #endif
-	}
+		}
 	if (topk8)
 		{
 		BIO_free(in); /* Not needed in this section */
 		pkey = load_key(bio_err, infile, informat, 1,
 			passin, e, "key");
-		if (!pkey) {
-			return (1);
-		}
-		if (!(p8inf = EVP_PKEY2PKCS8_broken(pkey, p8_broken))) {
-			BIO_printf(bio_err, "Error converting key\n", outfile);
-			ERR_print_errors(bio_err);
-			return (1);
-		}
-		if(nocrypt) {
-			if(outformat == FORMAT_PEM) 
-				PEM_write_bio_PKCS8_PRIV_KEY_INFO(out, p8inf);
-			else if(outformat == FORMAT_ASN1)
-				i2d_PKCS8_PRIV_KEY_INFO_bio(out, p8inf);
-			else {
-				BIO_printf(bio_err, "Bad format specified for key\n");
-				return (1);
+		if (!pkey)
+			{
+			BIO_free_all(out);
+			return 1;
 			}
-		} else {
-			if(passout) p8pass = passout;
-			else {
+		if (!(p8inf = EVP_PKEY2PKCS8_broken(pkey, p8_broken)))
+			{
+			BIO_printf(bio_err, "Error converting key\n");
+			ERR_print_errors(bio_err);
+			EVP_PKEY_free(pkey);
+			BIO_free_all(out);
+			return 1;
+			}
+		if (nocrypt)
+			{
+			if (outformat == FORMAT_PEM) 
+				PEM_write_bio_PKCS8_PRIV_KEY_INFO(out, p8inf);
+			else if (outformat == FORMAT_ASN1)
+				i2d_PKCS8_PRIV_KEY_INFO_bio(out, p8inf);
+			else
+				{
+				BIO_printf(bio_err, "Bad format specified for key\n");
+				PKCS8_PRIV_KEY_INFO_free(p8inf);
+				EVP_PKEY_free(pkey);
+				BIO_free_all(out);
+				return (1);
+				}
+			}
+		else
+			{
+			if (passout)
+				p8pass = passout;
+			else
+				{
 				p8pass = pass;
 				if (EVP_read_pw_string(pass, sizeof pass, "Enter Encryption Password:", 1))
+					{
+					PKCS8_PRIV_KEY_INFO_free(p8inf);
+					EVP_PKEY_free(pkey);
+					BIO_free_all(out);
 					return (1);
-			}
+					}
+				}
 			app_RAND_load_file(NULL, bio_err, 0);
 			if (!(p8 = PKCS8_encrypt(pbe_nid, cipher,
 					p8pass, strlen(p8pass),
-					NULL, 0, iter, p8inf))) {
-				BIO_printf(bio_err, "Error encrypting key\n",
-								 outfile);
+					NULL, 0, iter, p8inf)))
+				{
+				BIO_printf(bio_err, "Error encrypting key\n");
 				ERR_print_errors(bio_err);
+				PKCS8_PRIV_KEY_INFO_free(p8inf);
+				EVP_PKEY_free(pkey);
+				BIO_free_all(out);
 				return (1);
-			}
+				}
 			app_RAND_write_file(NULL, bio_err);
-			if(outformat == FORMAT_PEM) 
+			if (outformat == FORMAT_PEM) 
 				PEM_write_bio_PKCS8(out, p8);
-			else if(outformat == FORMAT_ASN1)
+			else if (outformat == FORMAT_ASN1)
 				i2d_PKCS8_bio(out, p8);
-			else {
+			else
+				{
 				BIO_printf(bio_err, "Bad format specified for key\n");
+				PKCS8_PRIV_KEY_INFO_free(p8inf);
+				EVP_PKEY_free(pkey);
+				BIO_free_all(out);
 				return (1);
-			}
+				}
 			X509_SIG_free(p8);
-		}
+			}
+
 		PKCS8_PRIV_KEY_INFO_free (p8inf);
 		EVP_PKEY_free(pkey);
 		BIO_free_all(out);
-		if(passin) OPENSSL_free(passin);
-		if(passout) OPENSSL_free(passout);
+		if (passin)
+			OPENSSL_free(passin);
+		if (passout)
+			OPENSSL_free(passout);
 		return (0);
-	}
+		}
 
-	if(nocrypt) {
-		if(informat == FORMAT_PEM) 
+	if (nocrypt)
+		{
+		if (informat == FORMAT_PEM) 
 			p8inf = PEM_read_bio_PKCS8_PRIV_KEY_INFO(in,NULL,NULL, NULL);
-		else if(informat == FORMAT_ASN1)
+		else if (informat == FORMAT_ASN1)
 			p8inf = d2i_PKCS8_PRIV_KEY_INFO_bio(in, NULL);
-		else {
+		else
+			{
 			BIO_printf(bio_err, "Bad format specified for key\n");
 			return (1);
+			}
 		}
-	} else {
-		if(informat == FORMAT_PEM) 
+	else
+		{
+		if (informat == FORMAT_PEM) 
 			p8 = PEM_read_bio_PKCS8(in, NULL, NULL, NULL);
-		else if(informat == FORMAT_ASN1)
+		else if (informat == FORMAT_ASN1)
 			p8 = d2i_PKCS8_bio(in, NULL);
-		else {
+		else
+			{
 			BIO_printf(bio_err, "Bad format specified for key\n");
 			return (1);
-		}
+			}
 
-		if (!p8) {
-			BIO_printf (bio_err, "Error reading key\n", outfile);
+		if (!p8)
+			{
+			BIO_printf (bio_err, "Error reading key\n");
 			ERR_print_errors(bio_err);
 			return (1);
-		}
-		if(passin) p8pass = passin;
-		else {
+			}
+		if (passin)
+			p8pass = passin;
+		else
+			{
 			p8pass = pass;
 			EVP_read_pw_string(pass, sizeof pass, "Enter Password:", 0);
-		}
+			}
 		p8inf = PKCS8_decrypt(p8, p8pass, strlen(p8pass));
 		X509_SIG_free(p8);
-	}
+		}
 
-	if (!p8inf) {
-		BIO_printf(bio_err, "Error decrypting key\n", outfile);
+	if (!p8inf)
+		{
+		BIO_printf(bio_err, "Error decrypting key\n");
 		ERR_print_errors(bio_err);
 		return (1);
-	}
+		}
 
-	if (!(pkey = EVP_PKCS82PKEY(p8inf))) {
-		BIO_printf(bio_err, "Error converting key\n", outfile);
+	if (!(pkey = EVP_PKCS82PKEY(p8inf)))
+		{
+		BIO_printf(bio_err, "Error converting key\n");
 		ERR_print_errors(bio_err);
 		return (1);
-	}
+		}
 	
-	if (p8inf->broken) {
+	if (p8inf->broken)
+		{
 		BIO_printf(bio_err, "Warning: broken key encoding: ");
-		switch (p8inf->broken) {
+		switch (p8inf->broken)
+			{
 			case PKCS8_NO_OCTET:
 			BIO_printf(bio_err, "No Octet String in PrivateKey\n");
 			break;
@@ -342,21 +437,24 @@ int MAIN(int argc, char **argv)
 	}
 	
 	PKCS8_PRIV_KEY_INFO_free(p8inf);
-	if(outformat == FORMAT_PEM) 
+	if (outformat == FORMAT_PEM) 
 		PEM_write_bio_PrivateKey(out, pkey, NULL, NULL, 0, NULL, passout);
-	else if(outformat == FORMAT_ASN1)
+	else if (outformat == FORMAT_ASN1)
 		i2d_PrivateKey_bio(out, pkey);
-	else {
+	else
+		{
 		BIO_printf(bio_err, "Bad format specified for key\n");
 			return (1);
-	}
+		}
 
 	end:
 	EVP_PKEY_free(pkey);
 	BIO_free_all(out);
 	BIO_free(in);
-	if(passin) OPENSSL_free(passin);
-	if(passout) OPENSSL_free(passout);
+	if (passin)
+		OPENSSL_free(passin);
+	if (passout)
+		OPENSSL_free(passout);
 
 	return (0);
-}
+	}

apps/prime.c

@@ -0,0 +1,128 @@
+/* ====================================================================
+ * Copyright (c) 2004 The OpenSSL Project.  All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer. 
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ *
+ * 3. All advertising materials mentioning features or use of this
+ *    software must display the following acknowledgment:
+ *    "This product includes software developed by the OpenSSL Project
+ *    for use in the OpenSSL Toolkit. (http://www.openssl.org/)"
+ *
+ * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
+ *    endorse or promote products derived from this software without
+ *    prior written permission. For written permission, please contact
+ *    openssl-core@openssl.org.
+ *
+ * 5. Products derived from this software may not be called "OpenSSL"
+ *    nor may "OpenSSL" appear in their names without prior written
+ *    permission of the OpenSSL Project.
+ *
+ * 6. Redistributions of any form whatsoever must retain the following
+ *    acknowledgment:
+ *    "This product includes software developed by the OpenSSL Project
+ *    for use in the OpenSSL Toolkit (http://www.openssl.org/)"
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
+ * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
+ * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE OpenSSL PROJECT OR
+ * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
+ * OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ */
+
+#include <string.h>
+
+#include "apps.h"
+#include <openssl/bn.h>
+
+
+#undef PROG
+#define PROG prime_main
+
+int MAIN(int argc, char **argv)
+    {
+    int hex=0;
+    int checks=20;
+    BIGNUM *bn=NULL;
+    BIO *bio_out;
+
+    apps_startup();
+
+    if (bio_err == NULL)
+	if ((bio_err=BIO_new(BIO_s_file())) != NULL)
+	    BIO_set_fp(bio_err,stderr,BIO_NOCLOSE|BIO_FP_TEXT);
+
+    --argc;
+    ++argv;
+    while (argc >= 1 && **argv == '-')
+	{
+	if(!strcmp(*argv,"-hex"))
+	    hex=1;
+	else if(!strcmp(*argv,"-checks"))
+	    if(--argc < 1)
+		goto bad;
+	    else
+		checks=atoi(*++argv);
+	else
+	    {
+	    BIO_printf(bio_err,"Unknown option '%s'\n",*argv);
+	    goto bad;
+	    }
+	--argc;
+	++argv;
+	}
+
+    if (argv[0] == NULL)
+	{
+	BIO_printf(bio_err,"No prime specified\n");
+	goto bad;
+	}
+
+   if ((bio_out=BIO_new(BIO_s_file())) != NULL)
+	{
+	BIO_set_fp(bio_out,stdout,BIO_NOCLOSE);
+#ifdef OPENSSL_SYS_VMS
+	    {
+	    BIO *tmpbio = BIO_new(BIO_f_linebuffer());
+	    bio_out = BIO_push(tmpbio, bio_out);
+	    }
+#endif
+	}
+
+    if(hex)
+	BN_hex2bn(&bn,argv[0]);
+    else
+	BN_dec2bn(&bn,argv[0]);
+
+    BN_print(bio_out,bn);
+    BIO_printf(bio_out," is %sprime\n",
+	       BN_is_prime(bn,checks,NULL,NULL,NULL) ? "" : "not ");
+
+    BN_free(bn);
+    BIO_free_all(bio_out);
+
+    return 0;
+
+    bad:
+    BIO_printf(bio_err,"options are\n");
+    BIO_printf(bio_err,"%-14s hex\n","-hex");
+    BIO_printf(bio_err,"%-14s number of checks\n","-checks <n>");
+    return 1;
+    }

apps/progs.h

@@ -35,7 +35,10 @@ extern int pkcs8_main(int argc,char *argv[]);
 extern int spkac_main(int argc,char *argv[]);
 extern int smime_main(int argc,char *argv[]);
 extern int rand_main(int argc,char *argv[]);
+extern int prime_main(int argc,char *argv[]);
+#ifndef OPENSSL_NO_ENGINE
 extern int engine_main(int argc,char *argv[]);
+#endif
 extern int ocsp_main(int argc,char *argv[]);
 
 #define FUNC_TYPE_GENERAL	1
@@ -92,7 +95,9 @@ FUNCTION functions[] = {
 #if !defined(OPENSSL_NO_SOCK) && !(defined(OPENSSL_NO_SSL2) && defined(OPENSSL_NO_SSL3))
 	{FUNC_TYPE_GENERAL,"s_client",s_client_main},
 #endif
+#ifndef OPENSSL_NO_SPEED
 	{FUNC_TYPE_GENERAL,"speed",speed_main},
+#endif
 #if !defined(OPENSSL_NO_SOCK) && !(defined(OPENSSL_NO_SSL2) && defined(OPENSSL_NO_SSL3))
 	{FUNC_TYPE_GENERAL,"s_time",s_time_main},
 #endif
@@ -111,7 +116,10 @@ FUNCTION functions[] = {
 	{FUNC_TYPE_GENERAL,"spkac",spkac_main},
 	{FUNC_TYPE_GENERAL,"smime",smime_main},
 	{FUNC_TYPE_GENERAL,"rand",rand_main},
+	{FUNC_TYPE_GENERAL,"prime",prime_main},
+#ifndef OPENSSL_NO_ENGINE
 	{FUNC_TYPE_GENERAL,"engine",engine_main},
+#endif
 	{FUNC_TYPE_GENERAL,"ocsp",ocsp_main},
 #ifndef OPENSSL_NO_MD2
 	{FUNC_TYPE_MD,"md2",dgst_main},

apps/rand.c

@@ -76,7 +76,9 @@ int MAIN(int, char **);
 
 int MAIN(int argc, char **argv)
 	{
+#ifndef OPENSSL_NO_ENGINE
 	ENGINE *e = NULL;
+#endif
 	int i, r, ret = 1;
 	int badopt;
 	char *outfile = NULL;
@@ -84,7 +86,9 @@ int MAIN(int argc, char **argv)
 	int base64 = 0;
 	BIO *out = NULL;
 	int num = -1;
+#ifndef OPENSSL_NO_ENGINE
 	char *engine=NULL;
+#endif
 
 	apps_startup();
 
@@ -106,6 +110,7 @@ int MAIN(int argc, char **argv)
 			else
 				badopt = 1;
 			}
+#ifndef OPENSSL_NO_ENGINE
 		else if (strcmp(argv[i], "-engine") == 0)
 			{
 			if ((argv[i+1] != NULL) && (engine == NULL))
@@ -113,6 +118,7 @@ int MAIN(int argc, char **argv)
 			else
 				badopt = 1;
 			}
+#endif
 		else if (strcmp(argv[i], "-rand") == 0)
 			{
 			if ((argv[i+1] != NULL) && (inrand == NULL))
@@ -150,13 +156,17 @@ int MAIN(int argc, char **argv)
 		BIO_printf(bio_err, "Usage: rand [options] num\n");
 		BIO_printf(bio_err, "where options are\n");
 		BIO_printf(bio_err, "-out file             - write to file\n");
+#ifndef OPENSSL_NO_ENGINE
 		BIO_printf(bio_err, "-engine e             - use engine e, possibly a hardware device.\n");
+#endif
 		BIO_printf(bio_err, "-rand file%cfile%c... - seed PRNG from files\n", LIST_SEPARATOR_CHAR, LIST_SEPARATOR_CHAR);
 		BIO_printf(bio_err, "-base64               - encode output\n");
 		goto err;
 		}
 
+#ifndef OPENSSL_NO_ENGINE
         e = setup_engine(bio_err, engine, 0);
+#endif
 
 	app_RAND_load_file(NULL, bio_err, (inrand != NULL));
 	if (inrand != NULL)
@@ -213,5 +223,5 @@ err:
 	if (out)
 		BIO_free_all(out);
 	apps_shutdown();
-	EXIT(ret);
+	OPENSSL_EXIT(ret);
 	}

apps/req.c

@@ -135,7 +135,6 @@ static int req_check_len(int len,int n_min,int n_max);
 static int check_end(char *str, char *end);
 #ifndef MONOLITH
 static char *default_config_file=NULL;
-static CONF *config=NULL;
 #endif
 static CONF *req_conf=NULL;
 static int batch=0;
@@ -163,7 +162,9 @@ int MAIN(int argc, char **argv)
 	int informat,outformat,verify=0,noout=0,text=0,keyform=FORMAT_PEM;
 	int nodes=0,kludge=0,newhdr=0,subject=0,pubkey=0;
 	char *infile,*outfile,*prog,*keyfile=NULL,*template=NULL,*keyout=NULL;
+#ifndef OPENSSL_NO_ENGINE
 	char *engine=NULL;
+#endif
 	char *extensions = NULL;
 	char *req_exts = NULL;
 	const EVP_CIPHER *cipher=NULL;
@@ -174,7 +175,7 @@ int MAIN(int argc, char **argv)
 	char *passin = NULL, *passout = NULL;
 	char *p;
 	char *subj = NULL;
-	const EVP_MD *md_alg=NULL,*digest=EVP_md5();
+	const EVP_MD *md_alg=NULL,*digest;
 	unsigned long chtype = MBSTRING_ASC;
 #ifndef MONOLITH
 	char *to_free;
@@ -196,6 +197,13 @@ int MAIN(int argc, char **argv)
 	informat=FORMAT_PEM;
 	outformat=FORMAT_PEM;
 
+#ifdef  OPENSSL_FIPS
+	if (FIPS_mode())
+		digest = EVP_sha1();
+	else
+#endif
+		digest = EVP_md5();
+
 	prog=argv[0];
 	argc--;
 	argv++;
@@ -211,11 +219,13 @@ int MAIN(int argc, char **argv)
 			if (--argc < 1) goto bad;
 			outformat=str2fmt(*(++argv));
 			}
+#ifndef OPENSSL_NO_ENGINE
 		else if (strcmp(*argv,"-engine") == 0)
 			{
 			if (--argc < 1) goto bad;
 			engine= *(++argv);
 			}
+#endif
 		else if (strcmp(*argv,"-key") == 0)
 			{
 			if (--argc < 1) goto bad;
@@ -429,7 +439,9 @@ bad:
 		BIO_printf(bio_err," -verify        verify signature on REQ\n");
 		BIO_printf(bio_err," -modulus       RSA modulus\n");
 		BIO_printf(bio_err," -nodes         don't encrypt the output key\n");
+#ifndef OPENSSL_NO_ENGINE
 		BIO_printf(bio_err," -engine e      use engine e, possibly a hardware device\n");
+#endif
 		BIO_printf(bio_err," -subject       output the request's subject\n");
 		BIO_printf(bio_err," -passin        private key password source\n");
 		BIO_printf(bio_err," -key file      use the private key contained in file\n");
@@ -454,7 +466,7 @@ bad:
 		BIO_printf(bio_err," -extensions .. specify certificate extension section (override value in config file)\n");
 		BIO_printf(bio_err," -reqexts ..    specify request extension section (override value in config file)\n");
 		BIO_printf(bio_err," -utf8          input characters are UTF8 (default ASCII)\n");
-		BIO_printf(bio_err," -nameopt arg   - various certificate name options\n");
+		BIO_printf(bio_err," -nameopt arg    - various certificate name options\n");
 		BIO_printf(bio_err," -reqopt arg    - various request text options\n\n");
 		goto end;
 		}
@@ -494,13 +506,16 @@ bad:
 	else
 		{
 		req_conf=config;
-		if( verbose )
-			BIO_printf(bio_err,"Using configuration from %s\n",
-			default_config_file);
+
 		if (req_conf == NULL)
 			{
-			BIO_printf(bio_err,"Unable to load config info\n");
+			BIO_printf(bio_err,"Unable to load config info from %s\n", default_config_file);
+			if (newreq)
+				goto end;
 			}
+		else if( verbose )
+			BIO_printf(bio_err,"Using configuration from %s\n",
+			default_config_file);
 		}
 
 	if (req_conf != NULL)
@@ -618,7 +633,9 @@ bad:
 	if ((in == NULL) || (out == NULL))
 		goto end;
 
+#ifndef OPENSSL_NO_ENGINE
         e = setup_engine(bio_err, engine, 0);
+#endif
 
 	if (keyfile != NULL)
 		{
@@ -817,14 +834,16 @@ loop:
 			if ((x509ss=X509_new()) == NULL) goto end;
 
 			/* Set version to V3 */
-			if(!X509_set_version(x509ss, 2)) goto end;
+			if(extensions && !X509_set_version(x509ss, 2)) goto end;
 			if (serial)
 				{
 				if (!X509_set_serialNumber(x509ss, serial)) goto end;
 				}
 			else
 				{
-				if (!ASN1_INTEGER_set(X509_get_serialNumber(x509ss),0L)) goto end;
+				if (!rand_serial(NULL,
+					X509_get_serialNumber(x509ss)))
+						goto end;
 				}
 
 			if (!X509_set_issuer_name(x509ss, X509_REQ_get_subject_name(req))) goto end;
@@ -1075,7 +1094,7 @@ end:
 	if (dsa_params != NULL) DSA_free(dsa_params);
 #endif
 	apps_shutdown();
-	EXIT(ex);
+	OPENSSL_EXIT(ex);
 	}
 
 static int make_REQ(X509_REQ *req, EVP_PKEY *pkey, char *subj, int attribs,
@@ -1216,33 +1235,39 @@ start:		for (;;)
 				}
 			/* If OBJ not recognised ignore it */
 			if ((nid=OBJ_txt2nid(type)) == NID_undef) goto start;
-
-			if(strlen(v->name) > sizeof buf-9)
+			if (BIO_snprintf(buf,sizeof buf,"%s_default",v->name)
+				>= sizeof buf)
 			   {
 			   BIO_printf(bio_err,"Name '%s' too long\n",v->name);
 			   return 0;
 			   }
 
-			sprintf(buf,"%s_default",v->name);
 			if ((def=NCONF_get_string(req_conf,dn_sect,buf)) == NULL)
 				{
 				ERR_clear_error();
 				def="";
 				}
-			sprintf(buf,"%s_value",v->name);
+				
+			BIO_snprintf(buf,sizeof buf,"%s_value",v->name);
 			if ((value=NCONF_get_string(req_conf,dn_sect,buf)) == NULL)
 				{
 				ERR_clear_error();
 				value=NULL;
 				}
 
-			sprintf(buf,"%s_min",v->name);
+			BIO_snprintf(buf,sizeof buf,"%s_min",v->name);
 			if (!NCONF_get_number(req_conf,dn_sect,buf, &n_min))
+				{
+				ERR_clear_error();
 				n_min = -1;
+				}
 
-			sprintf(buf,"%s_max",v->name);
+			BIO_snprintf(buf,sizeof buf,"%s_max",v->name);
 			if (!NCONF_get_number(req_conf,dn_sect,buf, &n_max))
+				{
+				ERR_clear_error();
 				n_max = -1;
+				}
 
 			if (!add_DN_object(subj,v->value,def,value,nid,
 				n_min,n_max, chtype))
@@ -1275,13 +1300,13 @@ start2:			for (;;)
 				if ((nid=OBJ_txt2nid(type)) == NID_undef)
 					goto start2;
 
-				if(strlen(v->name) > sizeof buf-9)
+				if (BIO_snprintf(buf,sizeof buf,"%s_default",type)
+					>= sizeof buf)
 				   {
 				   BIO_printf(bio_err,"Name '%s' too long\n",v->name);
 				   return 0;
 				   }
 
-				sprintf(buf,"%s_default",type);
 				if ((def=NCONF_get_string(req_conf,attr_sect,buf))
 					== NULL)
 					{
@@ -1290,7 +1315,7 @@ start2:			for (;;)
 					}
 				
 				
-				sprintf(buf,"%s_value",type);
+				BIO_snprintf(buf,sizeof buf,"%s_value",type);
 				if ((value=NCONF_get_string(req_conf,attr_sect,buf))
 					== NULL)
 					{
@@ -1298,11 +1323,11 @@ start2:			for (;;)
 					value=NULL;
 					}
 
-				sprintf(buf,"%s_min",type);
+				BIO_snprintf(buf,sizeof buf,"%s_min",type);
 				if (!NCONF_get_number(req_conf,attr_sect,buf, &n_min))
 					n_min = -1;
 
-				sprintf(buf,"%s_max",type);
+				BIO_snprintf(buf,sizeof buf,"%s_max",type);
 				if (!NCONF_get_number(req_conf,attr_sect,buf, &n_max))
 					n_max = -1;
 
@@ -1384,9 +1409,8 @@ start:
 	(void)BIO_flush(bio_err);
 	if(value != NULL)
 		{
-		OPENSSL_assert(strlen(value) < sizeof buf-2);
-		strcpy(buf,value);
-		strcat(buf,"\n");
+		BUF_strlcpy(buf,value,sizeof buf);
+		BUF_strlcat(buf,"\n",sizeof buf);
 		BIO_printf(bio_err,"%s\n",value);
 		}
 	else
@@ -1408,8 +1432,8 @@ start:
 		{
 		if ((def == NULL) || (def[0] == '\0'))
 			return(1);
-		strcpy(buf,def);
-		strcat(buf,"\n");
+		BUF_strlcpy(buf,def,sizeof buf);
+		BUF_strlcat(buf,"\n",sizeof buf);
 		}
 	else if ((buf[0] == '.') && (buf[1] == '\n')) return(1);
 
@@ -1443,9 +1467,8 @@ start:
 	(void)BIO_flush(bio_err);
 	if (value != NULL)
 		{
-		OPENSSL_assert(strlen(value) < sizeof buf-2);
-		strcpy(buf,value);
-		strcat(buf,"\n");
+		BUF_strlcpy(buf,value,sizeof buf);
+		BUF_strlcat(buf,"\n",sizeof buf);
 		BIO_printf(bio_err,"%s\n",value);
 		}
 	else
@@ -1467,8 +1490,8 @@ start:
 		{
 		if ((def == NULL) || (def[0] == '\0'))
 			return(1);
-		strcpy(buf,def);
-		strcat(buf,"\n");
+		BUF_strlcpy(buf,def,sizeof buf);
+		BUF_strlcat(buf,"\n",sizeof buf);
 		}
 	else if ((buf[0] == '.') && (buf[1] == '\n')) return(1);
 

apps/rsa.c

@@ -104,7 +104,9 @@ int MAIN(int argc, char **argv)
 	char *infile,*outfile,*prog;
 	char *passargin = NULL, *passargout = NULL;
 	char *passin = NULL, *passout = NULL;
+#ifndef OPENSSL_NO_ENGINE
 	char *engine=NULL;
+#endif
 	int modulus=0;
 
 	apps_startup();
@@ -156,11 +158,13 @@ int MAIN(int argc, char **argv)
 			if (--argc < 1) goto bad;
 			passargout= *(++argv);
 			}
+#ifndef OPENSSL_NO_ENGINE
 		else if (strcmp(*argv,"-engine") == 0)
 			{
 			if (--argc < 1) goto bad;
 			engine= *(++argv);
 			}
+#endif
 		else if (strcmp(*argv,"-sgckey") == 0)
 			sgckey=1;
 		else if (strcmp(*argv,"-pubin") == 0)
@@ -212,13 +216,17 @@ bad:
 		BIO_printf(bio_err," -check          verify key consistency\n");
 		BIO_printf(bio_err," -pubin          expect a public key in input file\n");
 		BIO_printf(bio_err," -pubout         output a public key\n");
+#ifndef OPENSSL_NO_ENGINE
 		BIO_printf(bio_err," -engine e       use engine e, possibly a hardware device.\n");
+#endif
 		goto end;
 		}
 
 	ERR_load_crypto_strings();
 
+#ifndef OPENSSL_NO_ENGINE
         e = setup_engine(bio_err, engine, 0);
+#endif
 
 	if(!app_passwd(bio_err, passargin, passargout, &passin, &passout)) {
 		BIO_printf(bio_err, "Error getting passwords\n");
@@ -369,7 +377,7 @@ end:
 	if(passin) OPENSSL_free(passin);
 	if(passout) OPENSSL_free(passout);
 	apps_shutdown();
-	EXIT(ret);
+	OPENSSL_EXIT(ret);
 	}
 #else /* !OPENSSL_NO_RSA */
 

apps/rsautl.c

@@ -3,7 +3,7 @@
  * project 2000.
  */
 /* ====================================================================
- * Copyright (c) 2000 The OpenSSL Project.  All rights reserved.
+ * Copyright (c) 2000-2005 The OpenSSL Project.  All rights reserved.
  *
  * Redistribution and use in source and binary forms, with or without
  * modification, are permitted provided that the following conditions
@@ -85,7 +85,9 @@ int MAIN(int argc, char **argv)
 	ENGINE *e = NULL;
 	BIO *in = NULL, *out = NULL;
 	char *infile = NULL, *outfile = NULL;
+#ifndef OPENSSL_NO_ENGINE
 	char *engine = NULL;
+#endif
 	char *keyfile = NULL;
 	char rsa_mode = RSA_VERIFY, key_type = KEY_PRIVKEY;
 	int keyform = FORMAT_PEM;
@@ -95,6 +97,7 @@ int MAIN(int argc, char **argv)
 	EVP_PKEY *pkey = NULL;
 	RSA *rsa = NULL;
 	unsigned char *rsa_in = NULL, *rsa_out = NULL, pad;
+	char *passargin = NULL, *passin = NULL;
 	int rsa_inlen, rsa_outlen = 0;
 	int keysize;
 
@@ -122,12 +125,17 @@ int MAIN(int argc, char **argv)
 		} else if(!strcmp(*argv, "-inkey")) {
 			if (--argc < 1) badarg = 1;
 			keyfile = *(++argv);
+		} else if (!strcmp(*argv,"-passin")) {
+			if (--argc < 1) badarg = 1;
+			passargin= *(++argv);
 		} else if (strcmp(*argv,"-keyform") == 0) {
 			if (--argc < 1) badarg = 1;
 			keyform=str2fmt(*(++argv));
+#ifndef OPENSSL_NO_ENGINE
 		} else if(!strcmp(*argv, "-engine")) {
 			if (--argc < 1) badarg = 1;
 			engine = *(++argv);
+#endif
 		} else if(!strcmp(*argv, "-pubin")) {
 			key_type = KEY_PUBKEY;
 		} else if(!strcmp(*argv, "-certin")) {
@@ -139,6 +147,7 @@ int MAIN(int argc, char **argv)
 		else if(!strcmp(*argv, "-oaep")) pad = RSA_PKCS1_OAEP_PADDING;
 		else if(!strcmp(*argv, "-ssl")) pad = RSA_SSLV23_PADDING;
 		else if(!strcmp(*argv, "-pkcs")) pad = RSA_PKCS1_PADDING;
+		else if(!strcmp(*argv, "-x931")) pad = RSA_X931_PADDING;
 		else if(!strcmp(*argv, "-sign")) {
 			rsa_mode = RSA_SIGN;
 			need_priv = 1;
@@ -162,7 +171,13 @@ int MAIN(int argc, char **argv)
 		goto end;
 	}
 
+#ifndef OPENSSL_NO_ENGINE
         e = setup_engine(bio_err, engine, 0);
+#endif
+	if(!app_passwd(bio_err, passargin, NULL, &passin, NULL)) {
+		BIO_printf(bio_err, "Error getting password\n");
+		goto end;
+	}
 
 /* FIXME: seed PRNG only if needed */
 	app_RAND_load_file(NULL, bio_err, 0);
@@ -170,7 +185,7 @@ int MAIN(int argc, char **argv)
 	switch(key_type) {
 		case KEY_PRIVKEY:
 		pkey = load_key(bio_err, keyfile, keyform, 0,
-			NULL, e, "Private Key");
+			passin, e, "Private Key");
 		break;
 
 		case KEY_PUBKEY:
@@ -284,6 +299,7 @@ int MAIN(int argc, char **argv)
 	BIO_free_all(out);
 	if(rsa_in) OPENSSL_free(rsa_in);
 	if(rsa_out) OPENSSL_free(rsa_out);
+	if(passin) OPENSSL_free(passin);
 	return ret;
 }
 
@@ -305,7 +321,10 @@ static void usage()
 	BIO_printf(bio_err, "-encrypt        encrypt with public key\n");
 	BIO_printf(bio_err, "-decrypt        decrypt with private key\n");
 	BIO_printf(bio_err, "-hexdump        hex dump output\n");
+#ifndef OPENSSL_NO_ENGINE
 	BIO_printf(bio_err, "-engine e       use engine e, possibly a hardware device.\n");
+	BIO_printf (bio_err, "-passin arg    pass phrase source\n");
+#endif
 
 }
 

apps/s_apps.h

@@ -112,6 +112,14 @@
 #include <sys/types.h>
 #include <openssl/opensslconf.h>
 
+#if defined(OPENSSL_SYS_WINDOWS) || defined(OPENSSL_SYS_MSDOS)
+#include <conio.h>
+#endif
+
+#ifdef OPENSSL_SYS_MSDOS
+#define _kbhit kbhit
+#endif
+
 #if defined(OPENSSL_SYS_VMS) && !defined(FD_SET)
 /* VAX C does not defined fd_set and friends, but it's actually quite simple */
 /* These definitions are borrowed from SOCKETSHR.	/Richard Levitte */

apps/s_client.c

@@ -136,10 +136,6 @@ typedef unsigned int u_int;
 #include <openssl/rand.h>
 #include "s_apps.h"
 
-#ifdef OPENSSL_SYS_WINDOWS
-#include <conio.h>
-#endif
-
 #ifdef OPENSSL_SYS_WINCE
 /* Windows CE incorrectly defines fileno as returning void*, so to avoid problems below... */
 #ifdef fileno
@@ -201,6 +197,9 @@ static void sc_usage(void)
 	BIO_printf(bio_err," -pause        - sleep(1) after each read(2) and write(2) system call\n");
 	BIO_printf(bio_err," -showcerts    - show all certificates in the chain\n");
 	BIO_printf(bio_err," -debug        - extra output\n");
+#ifdef WATT32
+	BIO_printf(bio_err," -wdebug       - WATT-32 tcp debugging\n");
+#endif
 	BIO_printf(bio_err," -msg          - Show protocol messages\n");
 	BIO_printf(bio_err," -nbio_test    - more ssl protocol testing\n");
 	BIO_printf(bio_err," -state        - print the 'ssl' states\n");
@@ -221,8 +220,10 @@ static void sc_usage(void)
 	BIO_printf(bio_err," -starttls prot - use the STARTTLS command before starting TLS\n");
 	BIO_printf(bio_err,"                 for those protocols that support it, where\n");
 	BIO_printf(bio_err,"                 'prot' defines which one to assume.  Currently,\n");
-	BIO_printf(bio_err,"                 only \"smtp\" is supported.\n");
+	BIO_printf(bio_err,"                 only \"smtp\" and \"pop3\" are supported.\n");
+#ifndef OPENSSL_NO_ENGINE
 	BIO_printf(bio_err," -engine id    - Initialise and use the specified engine\n");
+#endif
 	BIO_printf(bio_err," -rand file%cfile%c...\n", LIST_SEPARATOR_CHAR, LIST_SEPARATOR_CHAR);
 
 	}
@@ -249,14 +250,16 @@ int MAIN(int argc, char **argv)
 	int write_tty,read_tty,write_ssl,read_ssl,tty_on,ssl_pending;
 	SSL_CTX *ctx=NULL;
 	int ret=1,in_init=1,i,nbio_test=0;
-	int smtp_starttls = 0;
+	int starttls_proto = 0;
 	int prexit = 0, vflags = 0;
 	SSL_METHOD *meth=NULL;
 	BIO *sbio;
 	char *inrand=NULL;
+#ifndef OPENSSL_NO_ENGINE
 	char *engine_id=NULL;
 	ENGINE *e=NULL;
-#ifdef OPENSSL_SYS_WINDOWS
+#endif
+#if defined(OPENSSL_SYS_WINDOWS) || defined(OPENSSL_SYS_MSDOS)
 	struct timeval tv;
 #endif
 
@@ -348,6 +351,10 @@ int MAIN(int argc, char **argv)
 			c_Pause=1;
 		else if	(strcmp(*argv,"-debug") == 0)
 			c_debug=1;
+#ifdef WATT32
+		else if	(strcmp(*argv,"-wdebug") == 0)
+			dbug_init();
+#endif
 		else if	(strcmp(*argv,"-msg") == 0)
 			c_msg=1;
 		else if	(strcmp(*argv,"-showcerts") == 0)
@@ -411,15 +418,19 @@ int MAIN(int argc, char **argv)
 			if (--argc < 1) goto bad;
 			++argv;
 			if (strcmp(*argv,"smtp") == 0)
-				smtp_starttls = 1;
+				starttls_proto = 1;
+			else if (strcmp(*argv,"pop3") == 0)
+				starttls_proto = 2;
 			else
 				goto bad;
 			}
+#ifndef OPENSSL_NO_ENGINE
 		else if	(strcmp(*argv,"-engine") == 0)
 			{
 			if (--argc < 1) goto bad;
 			engine_id = *(++argv);
 			}
+#endif
 		else if (strcmp(*argv,"-rand") == 0)
 			{
 			if (--argc < 1) goto bad;
@@ -444,7 +455,9 @@ bad:
 	OpenSSL_add_ssl_algorithms();
 	SSL_load_error_strings();
 
+#ifndef OPENSSL_NO_ENGINE
         e = setup_engine(bio_err, engine_id, 1);
+#endif
 
 	if (!app_RAND_load_file(NULL, bio_err, 1) && inrand == NULL
 		&& !RAND_status())
@@ -579,12 +592,20 @@ re_start:
 	sbuf_off=0;
 
 	/* This is an ugly hack that does a lot of assumptions */
-	if (smtp_starttls)
+	if (starttls_proto == 1)
 		{
 		BIO_read(sbio,mbuf,BUFSIZZ);
+		BIO_printf(sbio,"EHLO some.host.name\r\n");
+		BIO_read(sbio,mbuf,BUFSIZZ);
 		BIO_printf(sbio,"STARTTLS\r\n");
 		BIO_read(sbio,sbuf,BUFSIZZ);
 		}
+	if (starttls_proto == 2)
+		{
+		BIO_read(sbio,mbuf,BUFSIZZ);
+		BIO_printf(sbio,"STLS\r\n");
+		BIO_read(sbio,sbuf,BUFSIZZ);
+		}
 
 	for (;;)
 		{
@@ -605,11 +626,11 @@ re_start:
 				print_stuff(bio_c_out,con,full_log);
 				if (full_log > 0) full_log--;
 
-				if (smtp_starttls)
+				if (starttls_proto)
 					{
 					BIO_printf(bio_err,"%s",mbuf);
 					/* We don't need to know any more */
-					smtp_starttls = 0;
+					starttls_proto = 0;
 					}
 
 				if (reconnect)
@@ -628,7 +649,7 @@ re_start:
 
 		if (!ssl_pending)
 			{
-#ifndef OPENSSL_SYS_WINDOWS
+#if !defined(OPENSSL_SYS_WINDOWS) && !defined(OPENSSL_SYS_MSDOS)
 			if (tty_on)
 				{
 				if (read_tty)  FD_SET(fileno(stdin),&readfds);
@@ -655,8 +676,8 @@ re_start:
 			 * will choke the compiler: if you do have a cast then
 			 * you can either go for (int *) or (void *).
 			 */
-#ifdef OPENSSL_SYS_WINDOWS
-			/* Under Windows we make the assumption that we can
+#if defined(OPENSSL_SYS_WINDOWS) || defined(OPENSSL_SYS_MSDOS)
+                        /* Under Windows/DOS we make the assumption that we can
 			 * always write to the tty: therefore if we need to
 			 * write to the tty we just fall through. Otherwise
 			 * we timeout the select every second and see if there
@@ -670,7 +691,7 @@ re_start:
 					tv.tv_usec = 0;
 					i=select(width,(void *)&readfds,(void *)&writefds,
 						 NULL,&tv);
-#ifdef OPENSSL_SYS_WINCE
+#if defined(OPENSSL_SYS_WINCE) || defined(OPENSSL_SYS_MSDOS)
 					if(!i && (!_kbhit() || !read_tty) ) continue;
 #else
 					if(!i && (!((_kbhit()) || (WAIT_OBJECT_0 == WaitForSingleObject(GetStdHandle(STD_INPUT_HANDLE), 0))) || !read_tty) ) continue;
@@ -839,8 +860,8 @@ printf("read=%d pending=%d peek=%d\n",k,SSL_pending(con),SSL_peek(con,zbuf,10240
 				}
 			}
 
-#ifdef OPENSSL_SYS_WINDOWS
-#ifdef OPENSSL_SYS_WINCE
+#if defined(OPENSSL_SYS_WINDOWS) || defined(OPENSSL_SYS_MSDOS)
+#if defined(OPENSSL_SYS_WINCE) || defined(OPENSSL_SYS_MSDOS)
 		else if (_kbhit())
 #else
 		else if ((_kbhit()) || (WAIT_OBJECT_0 == WaitForSingleObject(GetStdHandle(STD_INPUT_HANDLE), 0)))
@@ -908,16 +929,16 @@ end:
 	if (con != NULL) SSL_free(con);
 	if (con2 != NULL) SSL_free(con2);
 	if (ctx != NULL) SSL_CTX_free(ctx);
-	if (cbuf != NULL) { memset(cbuf,0,BUFSIZZ); OPENSSL_free(cbuf); }
-	if (sbuf != NULL) { memset(sbuf,0,BUFSIZZ); OPENSSL_free(sbuf); }
-	if (mbuf != NULL) { memset(mbuf,0,BUFSIZZ); OPENSSL_free(mbuf); }
+	if (cbuf != NULL) { OPENSSL_cleanse(cbuf,BUFSIZZ); OPENSSL_free(cbuf); }
+	if (sbuf != NULL) { OPENSSL_cleanse(sbuf,BUFSIZZ); OPENSSL_free(sbuf); }
+	if (mbuf != NULL) { OPENSSL_cleanse(mbuf,BUFSIZZ); OPENSSL_free(mbuf); }
 	if (bio_c_out != NULL)
 		{
 		BIO_free(bio_c_out);
 		bio_c_out=NULL;
 		}
 	apps_shutdown();
-	EXIT(ret);
+	OPENSSL_EXIT(ret);
 	}
 
 

apps/s_server.c

@@ -140,10 +140,6 @@ typedef unsigned int u_int;
 #include <openssl/rand.h>
 #include "s_apps.h"
 
-#ifdef OPENSSL_SYS_WINDOWS
-#include <conio.h>
-#endif
-
 #ifdef OPENSSL_SYS_WINCE
 /* Windows CE incorrectly defines fileno as returning void*, so to avoid problems below... */
 #ifdef fileno
@@ -242,7 +238,9 @@ static int s_msg=0;
 static int s_quiet=0;
 
 static int hack=0;
+#ifndef OPENSSL_NO_ENGINE
 static char *engine_id=NULL;
+#endif
 static const char *session_id_prefix=NULL;
 
 #ifdef MONOLITH
@@ -267,7 +265,9 @@ static void s_server_init(void)
 	s_msg=0;
 	s_quiet=0;
 	hack=0;
+#ifndef OPENSSL_NO_ENGINE
 	engine_id=NULL;
+#endif
 	}
 #endif
 
@@ -316,7 +316,9 @@ static void sv_usage(void)
 	BIO_printf(bio_err," -WWW          - Respond to a 'GET /<path> HTTP/1.0' with file ./<path>\n");
 	BIO_printf(bio_err," -HTTP         - Respond to a 'GET /<path> HTTP/1.0' with file ./<path>\n");
         BIO_printf(bio_err,"                 with the assumption it contains a complete HTTP response.\n");
+#ifndef OPENSSL_NO_ENGINE
 	BIO_printf(bio_err," -engine id    - Initialise and use the specified engine\n");
+#endif
 	BIO_printf(bio_err," -id_prefix arg - Generate SSL/TLS session IDs prefixed by 'arg'\n");
 	BIO_printf(bio_err," -rand file%cfile%c...\n", LIST_SEPARATOR_CHAR, LIST_SEPARATOR_CHAR);
 	}
@@ -490,7 +492,9 @@ int MAIN(int argc, char *argv[])
 	int no_tmp_rsa=0,no_dhe=0,nocert=0;
 	int state=0;
 	SSL_METHOD *meth=NULL;
+#ifndef OPENSSL_NO_ENGINE
 	ENGINE *e=NULL;
+#endif
 	char *inrand=NULL;
 
 #if !defined(OPENSSL_NO_SSL2) && !defined(OPENSSL_NO_SSL3)
@@ -665,11 +669,13 @@ int MAIN(int argc, char *argv[])
 			if (--argc < 1) goto bad;
 			session_id_prefix = *(++argv);
 			}
+#ifndef OPENSSL_NO_ENGINE
 		else if (strcmp(*argv,"-engine") == 0)
 			{
 			if (--argc < 1) goto bad;
 			engine_id= *(++argv);
 			}
+#endif
 		else if (strcmp(*argv,"-rand") == 0)
 			{
 			if (--argc < 1) goto bad;
@@ -694,7 +700,9 @@ bad:
 	SSL_load_error_strings();
 	OpenSSL_add_ssl_algorithms();
 
+#ifndef OPENSSL_NO_ENGINE
         e = setup_engine(bio_err, engine_id, 1);
+#endif
 
 	if (!app_RAND_load_file(NULL, bio_err, 1) && inrand == NULL
 		&& !RAND_status())
@@ -868,7 +876,7 @@ end:
 		bio_s_out=NULL;
 		}
 	apps_shutdown();
-	EXIT(ret);
+	OPENSSL_EXIT(ret);
 	}
 
 static void print_stats(BIO *bio, SSL_CTX *ssl_ctx)
@@ -905,7 +913,7 @@ static int sv_body(char *hostname, int s, unsigned char *context)
 	unsigned long l;
 	SSL *con=NULL;
 	BIO *sbio;
-#ifdef OPENSSL_SYS_WINDOWS
+#if defined(OPENSSL_SYS_WINDOWS) || defined(OPENSSL_SYS_MSDOS)
 	struct timeval tv;
 #endif
 
@@ -979,7 +987,7 @@ static int sv_body(char *hostname, int s, unsigned char *context)
 		if (!read_from_sslcon)
 			{
 			FD_ZERO(&readfds);
-#ifndef OPENSSL_SYS_WINDOWS
+#if !defined(OPENSSL_SYS_WINDOWS) && !defined(OPENSSL_SYS_MSDOS)
 			FD_SET(fileno(stdin),&readfds);
 #endif
 			FD_SET(s,&readfds);
@@ -989,8 +997,8 @@ static int sv_body(char *hostname, int s, unsigned char *context)
 			 * the compiler: if you do have a cast then you can either
 			 * go for (int *) or (void *).
 			 */
-#ifdef OPENSSL_SYS_WINDOWS
-			/* Under Windows we can't select on stdin: only
+#if defined(OPENSSL_SYS_WINDOWS) || defined(OPENSSL_SYS_MSDOS)
+                        /* Under DOS (non-djgpp) and Windows we can't select on stdin: only
 			 * on sockets. As a workaround we timeout the select every
 			 * second and check for any keypress. In a proper Windows
 			 * application we wouldn't do this because it is inefficient.
@@ -1184,7 +1192,7 @@ err:
 	BIO_printf(bio_s_out,"CONNECTION CLOSED\n");
 	if (buf != NULL)
 		{
-		memset(buf,0,bufsize);
+		OPENSSL_cleanse(buf,bufsize);
 		OPENSSL_free(buf);
 		}
 	if (ret >= 0)
@@ -1251,7 +1259,13 @@ static int init_ssl_connection(SSL *con)
 	if (SSL_ctrl(con,SSL_CTRL_GET_FLAGS,0,NULL) &
 		TLS1_FLAGS_TLS_PADDING_BUG)
 		BIO_printf(bio_s_out,"Peer has incorrect TLSv1 block padding\n");
-
+#ifndef OPENSSL_NO_KRB5
+	if (con->kssl_ctx->client_princ != NULL)
+		{
+		BIO_printf(bio_s_out,"Kerberos peer principal is %s\n",
+			con->kssl_ctx->client_princ);
+		}
+#endif /* OPENSSL_NO_KRB5 */
 	return(1);
 	}
 

apps/s_socket.c

@@ -153,7 +153,6 @@ static int ssl_sock_init(void)
 #ifdef WATT32
 	extern int _watt_do_exit;
 	_watt_do_exit = 0;
-	dbug_init();
 	if (sock_init())
 		return (0);
 #elif defined(OPENSSL_SYS_WINDOWS)
@@ -389,7 +388,7 @@ redoit:
 			perror("OPENSSL_malloc");
 			return(0);
 			}
-		strcpy(*host,h1->h_name);
+		BUF_strlcpy(*host,h1->h_name,strlen(h1->h_name)+1);
 
 		h2=GetHostByName(*host);
 		if (h2 == NULL)

apps/s_time.c

@@ -502,7 +502,7 @@ int MAIN(int argc, char **argv)
 
 		if (s_www_path != NULL)
 			{
-			sprintf(buf,"GET %s HTTP/1.0\r\n\r\n",s_www_path);
+			BIO_snprintf(buf,sizeof buf,"GET %s HTTP/1.0\r\n\r\n",s_www_path);
 			SSL_write(scon,buf,strlen(buf));
 			while ((i=SSL_read(scon,buf,sizeof(buf))) > 0)
 				bytes_read+=i;
@@ -557,7 +557,7 @@ next:
 
 	if (s_www_path != NULL)
 		{
-		sprintf(buf,"GET %s HTTP/1.0\r\n\r\n",s_www_path);
+		BIO_snprintf(buf,sizeof buf,"GET %s HTTP/1.0\r\n\r\n",s_www_path);
 		SSL_write(scon,buf,strlen(buf));
 		while (SSL_read(scon,buf,sizeof(buf)) > 0)
 			;
@@ -595,7 +595,7 @@ next:
 
 		if (s_www_path)
 			{
-			sprintf(buf,"GET %s HTTP/1.0\r\n\r\n",s_www_path);
+			BIO_snprintf(buf,sizeof buf,"GET %s HTTP/1.0\r\n\r\n",s_www_path);
 			SSL_write(scon,buf,strlen(buf));
 			while ((i=SSL_read(scon,buf,sizeof(buf))) > 0)
 				bytes_read+=i;
@@ -642,7 +642,7 @@ end:
 		tm_ctx=NULL;
 		}
 	apps_shutdown();
-	EXIT(ret);
+	OPENSSL_EXIT(ret);
 	}
 
 /***********************************************************************

apps/sess_id.c

@@ -273,7 +273,7 @@ end:
 	if (out != NULL) BIO_free_all(out);
 	if (x != NULL) SSL_SESSION_free(x);
 	apps_shutdown();
-	EXIT(ret);
+	OPENSSL_EXIT(ret);
 	}
 
 static SSL_SESSION *load_sess_id(char *infile, int format)

apps/smime.c

@@ -104,7 +104,9 @@ int MAIN(int argc, char **argv)
 	int need_rand = 0;
 	int informat = FORMAT_SMIME, outformat = FORMAT_SMIME;
         int keyform = FORMAT_PEM;
+#ifndef OPENSSL_NO_ENGINE
 	char *engine=NULL;
+#endif
 
 	args = argv + 1;
 	ret = 1;
@@ -166,6 +168,10 @@ int MAIN(int argc, char **argv)
 				flags |= PKCS7_BINARY;
 		else if (!strcmp (*args, "-nosigs"))
 				flags |= PKCS7_NOSIGS;
+		else if (!strcmp (*args, "-nooldmime"))
+				flags |= PKCS7_NOOLDMIMETYPE;
+		else if (!strcmp (*args, "-crlfeol"))
+				flags |= PKCS7_CRLFEOL;
 		else if (!strcmp (*args, "-crl_check"))
 				store_flags |= X509_V_FLAG_CRL_CHECK;
 		else if (!strcmp (*args, "-crl_check_all"))
@@ -176,11 +182,13 @@ int MAIN(int argc, char **argv)
 				inrand = *args;
 			} else badarg = 1;
 			need_rand = 1;
+#ifndef OPENSSL_NO_ENGINE
 		} else if (!strcmp(*args,"-engine")) {
 			if (args[1]) {
 				args++;
 				engine = *args;
 			} else badarg = 1;
+#endif
 		} else if (!strcmp(*args,"-passin")) {
 			if (args[1]) {
 				args++;
@@ -330,7 +338,9 @@ int MAIN(int argc, char **argv)
 		BIO_printf (bio_err, "-CAfile file   trusted certificates file\n");
 		BIO_printf (bio_err, "-crl_check     check revocation status of signer's certificate using CRLs\n");
 		BIO_printf (bio_err, "-crl_check_all check revocation status of signer's certificate chain using CRLs\n");
+#ifndef OPENSSL_NO_ENGINE
 		BIO_printf (bio_err, "-engine e      use engine e, possibly a hardware device.\n");
+#endif
 		BIO_printf (bio_err, "-passin arg    input file pass phrase source\n");
 		BIO_printf(bio_err,  "-rand file%cfile%c...\n", LIST_SEPARATOR_CHAR, LIST_SEPARATOR_CHAR);
 		BIO_printf(bio_err,  "               load the file (or the files in the directory) into\n");
@@ -339,7 +349,9 @@ int MAIN(int argc, char **argv)
 		goto end;
 	}
 
+#ifndef OPENSSL_NO_ENGINE
         e = setup_engine(bio_err, engine, 0);
+#endif
 
 	if(!app_passwd(bio_err, passargin, NULL, &passin, NULL)) {
 		BIO_printf(bio_err, "Error getting password\n");

apps/speed.c

@@ -58,6 +58,8 @@
 
 /* most of this code has been pilfered from my libdes speed.c program */
 
+#ifndef OPENSSL_NO_SPEED
+
 #undef SECONDS
 #define SECONDS		3	
 #define RSA_SECONDS	10
@@ -370,7 +372,9 @@ int MAIN(int, char **);
 
 int MAIN(int argc, char **argv)
 	{
+#ifndef OPENSSL_NO_ENGINE
 	ENGINE *e = NULL;
+#endif
 	unsigned char *buf=NULL,*buf2=NULL;
 	int mret=1;
 	long count=0,save_count=0;
@@ -590,6 +594,7 @@ int MAIN(int argc, char **argv)
 			j--;	/* Otherwise, -elapsed gets confused with
 				   an algorithm. */
 			}
+#ifndef OPENSSL_NO_ENGINE
 		else if	((argc > 0) && (strcmp(*argv,"-engine") == 0))
 			{
 			argc--;
@@ -606,6 +611,7 @@ int MAIN(int argc, char **argv)
 			   means all of them should be run) */
 			j--;
 			}
+#endif
 #ifdef HAVE_FORK
 		else if	((argc > 0) && (strcmp(*argv,"-multi") == 0))
 			{
@@ -767,6 +773,7 @@ int MAIN(int argc, char **argv)
 			{
 			dsa_doit[R_DSA_512]=1;
 			dsa_doit[R_DSA_1024]=1;
+			dsa_doit[R_DSA_2048]=1;
 			}
 		else
 #endif
@@ -865,7 +872,9 @@ int MAIN(int argc, char **argv)
 #if defined(TIMES) || defined(USE_TOD)
 			BIO_printf(bio_err,"-elapsed        measure time in real time instead of CPU user time.\n");
 #endif
+#ifndef OPENSSL_NO_ENGINE
 			BIO_printf(bio_err,"-engine e       use engine e, possibly a hardware device.\n");
+#endif
 			BIO_printf(bio_err,"-evp e          use EVP e.\n");
 			BIO_printf(bio_err,"-decrypt        time decryption instead of encryption (only EVP).\n");
 			BIO_printf(bio_err,"-mr             produce machine readable output.\n");
@@ -998,6 +1007,9 @@ int MAIN(int argc, char **argv)
 	c[D_CBC_RC5][0]=count;
 	c[D_CBC_BF][0]=count;
 	c[D_CBC_CAST][0]=count;
+	c[D_CBC_128_AES][0]=count;
+	c[D_CBC_192_AES][0]=count;
+	c[D_CBC_256_AES][0]=count;
 
 	for (i=1; i<SIZE_NUM; i++)
 		{
@@ -1023,6 +1035,9 @@ int MAIN(int argc, char **argv)
 		c[D_CBC_RC5][i]=c[D_CBC_RC5][i-1]*l0/l1;
 		c[D_CBC_BF][i]=c[D_CBC_BF][i-1]*l0/l1;
 		c[D_CBC_CAST][i]=c[D_CBC_CAST][i-1]*l0/l1;
+		c[D_CBC_128_AES][i]=c[D_CBC_128_AES][i-1]*l0/l1;
+		c[D_CBC_192_AES][i]=c[D_CBC_192_AES][i-1]*l0/l1;
+		c[D_CBC_256_AES][i]=c[D_CBC_256_AES][i-1]*l0/l1;
 		}
 #ifndef OPENSSL_NO_RSA
 	rsa_c[R_RSA_512][0]=count/2000;
@@ -1380,6 +1395,7 @@ int MAIN(int argc, char **argv)
 					EVP_DecryptInit_ex(&ctx,evp_cipher,NULL,key16,iv);
 				else
 					EVP_EncryptInit_ex(&ctx,evp_cipher,NULL,key16,iv);
+				EVP_CIPHER_CTX_set_padding(&ctx, 0);
 
 				Time_F(START);
 				if(decrypt)
@@ -1393,6 +1409,7 @@ int MAIN(int argc, char **argv)
 				else
 					EVP_EncryptFinal_ex(&ctx,buf,&outl);
 				d=Time_F(STOP);
+				EVP_CIPHER_CTX_cleanup(&ctx);
 				}
 			if (evp_md)
 				{
@@ -1689,7 +1706,7 @@ show_res:
 				k,rsa_bits[k],rsa_results[k][0],
 				rsa_results[k][1]);
 		else
-			fprintf(stdout,"rsa %4u bits %8.4fs %8.4fs %8.1f %8.1f\n",
+			fprintf(stdout,"rsa %4u bits %8.6fs %8.6fs %8.1f %8.1f\n",
 				rsa_bits[k],rsa_results[k][0],rsa_results[k][1],
 				1.0/rsa_results[k][0],1.0/rsa_results[k][1]);
 		}
@@ -1708,7 +1725,7 @@ show_res:
 			fprintf(stdout,"+F3:%u:%u:%f:%f\n",
 				k,dsa_bits[k],dsa_results[k][0],dsa_results[k][1]);
 		else
-			fprintf(stdout,"dsa %4u bits %8.4fs %8.4fs %8.1f %8.1f\n",
+			fprintf(stdout,"dsa %4u bits %8.6fs %8.6fs %8.1f %8.1f\n",
 				dsa_bits[k],dsa_results[k][0],dsa_results[k][1],
 				1.0/dsa_results[k][0],1.0/dsa_results[k][1]);
 		}
@@ -1729,7 +1746,7 @@ end:
 			DSA_free(dsa_key[i]);
 #endif
 	apps_shutdown();
-	EXIT(mret);
+	OPENSSL_EXIT(mret);
 	}
 
 static void print_message(const char *s, long num, int length)
@@ -1939,3 +1956,4 @@ static int do_multi(int multi)
 	return 1;
 	}
 #endif
+#endif

apps/spkac.c

@@ -92,7 +92,9 @@ int MAIN(int argc, char **argv)
 	CONF *conf = NULL;
 	NETSCAPE_SPKI *spki = NULL;
 	EVP_PKEY *pkey = NULL;
+#ifndef OPENSSL_NO_ENGINE
 	char *engine=NULL;
+#endif
 
 	apps_startup();
 
@@ -141,11 +143,13 @@ int MAIN(int argc, char **argv)
 			if (--argc < 1) goto bad;
 			spksect= *(++argv);
 			}
+#ifndef OPENSSL_NO_ENGINE
 		else if (strcmp(*argv,"-engine") == 0)
 			{
 			if (--argc < 1) goto bad;
 			engine= *(++argv);
 			}
+#endif
 		else if (strcmp(*argv,"-noout") == 0)
 			noout=1;
 		else if (strcmp(*argv,"-pubkey") == 0)
@@ -171,7 +175,9 @@ bad:
 		BIO_printf(bio_err," -noout         don't print SPKAC\n");
 		BIO_printf(bio_err," -pubkey        output public key\n");
 		BIO_printf(bio_err," -verify        verify SPKAC signature\n");
+#ifndef OPENSSL_NO_ENGINE
 		BIO_printf(bio_err," -engine e      use engine e, possibly a hardware device.\n");
+#endif
 		goto end;
 		}
 
@@ -181,7 +187,9 @@ bad:
 		goto end;
 	}
 
+#ifndef OPENSSL_NO_ENGINE
         e = setup_engine(bio_err, engine, 0);
+#endif
 
 	if(keyfile) {
 		pkey = load_key(bio_err,
@@ -295,5 +303,5 @@ end:
 	EVP_PKEY_free(pkey);
 	if(passin) OPENSSL_free(passin);
 	apps_shutdown();
-	EXIT(ret);
+	OPENSSL_EXIT(ret);
 	}

apps/verify.c

@@ -86,7 +86,9 @@ int MAIN(int argc, char **argv)
 	STACK_OF(X509) *untrusted = NULL, *trusted = NULL;
 	X509_STORE *cert_ctx=NULL;
 	X509_LOOKUP *lookup=NULL;
+#ifndef OPENSSL_NO_ENGINE
 	char *engine=NULL;
+#endif
 
 	cert_ctx=X509_STORE_new();
 	if (cert_ctx == NULL) goto end;
@@ -142,11 +144,13 @@ int MAIN(int argc, char **argv)
 				if (argc-- < 1) goto end;
 				trustfile= *(++argv);
 				}
+#ifndef OPENSSL_NO_ENGINE
 			else if (strcmp(*argv,"-engine") == 0)
 				{
 				if (--argc < 1) goto end;
 				engine= *(++argv);
 				}
+#endif
 			else if (strcmp(*argv,"-help") == 0)
 				goto end;
 			else if (strcmp(*argv,"-ignore_critical") == 0)
@@ -170,7 +174,9 @@ int MAIN(int argc, char **argv)
 			break;
 		}
 
+#ifndef OPENSSL_NO_ENGINE
         e = setup_engine(bio_err, engine, 0);
+#endif
 
 	lookup=X509_STORE_add_lookup(cert_ctx,X509_LOOKUP_file());
 	if (lookup == NULL) abort();
@@ -219,7 +225,11 @@ int MAIN(int argc, char **argv)
 	ret=0;
 end:
 	if (ret == 1) {
-		BIO_printf(bio_err,"usage: verify [-verbose] [-CApath path] [-CAfile file] [-purpose purpose] [-crl_check] [-engine e] cert1 cert2 ...\n");
+		BIO_printf(bio_err,"usage: verify [-verbose] [-CApath path] [-CAfile file] [-purpose purpose] [-crl_check]");
+#ifndef OPENSSL_NO_ENGINE
+		BIO_printf(bio_err," [-engine e]");
+#endif
+		BIO_printf(bio_err," cert1 cert2 ...\n");
 		BIO_printf(bio_err,"recognized usages:\n");
 		for(i = 0; i < X509_PURPOSE_get_count(); i++) {
 			X509_PURPOSE *ptmp;
@@ -232,7 +242,7 @@ end:
 	sk_X509_pop_free(untrusted, X509_free);
 	sk_X509_pop_free(trusted, X509_free);
 	apps_shutdown();
-	EXIT(ret);
+	OPENSSL_EXIT(ret);
 	}
 
 static int check(X509_STORE *ctx, char *file, STACK_OF(X509) *uchain, STACK_OF(X509) *tchain, int purpose, ENGINE *e)
@@ -344,6 +354,7 @@ static int MS_CALLBACK cb(int ok, X509_STORE_CTX *ctx)
 		if (ctx->error == X509_V_ERR_DEPTH_ZERO_SELF_SIGNED_CERT) ok=1;
 		/* Continue after extension errors too */
 		if (ctx->error == X509_V_ERR_INVALID_CA) ok=1;
+		if (ctx->error == X509_V_ERR_INVALID_NON_CA) ok=1;
 		if (ctx->error == X509_V_ERR_PATH_LENGTH_EXCEEDED) ok=1;
 		if (ctx->error == X509_V_ERR_INVALID_PURPOSE) ok=1;
 		if (ctx->error == X509_V_ERR_DEPTH_ZERO_SELF_SIGNED_CERT) ok=1;

apps/version.c

@@ -200,5 +200,5 @@ int MAIN(int argc, char **argv)
 	if (dir)  printf("%s\n",SSLeay_version(SSLEAY_DIR));
 end:
 	apps_shutdown();
-	EXIT(ret);
+	OPENSSL_EXIT(ret);
 	}

apps/x509.c

@@ -131,7 +131,9 @@ static char *x509_usage[]={
 " -extensions     - section from config file with X509V3 extensions to add\n",
 " -clrext         - delete extensions before signing and input certificate\n",
 " -nameopt arg    - various certificate name options\n",
+#ifndef OPENSSL_NO_ENGINE
 " -engine e       - use engine e, possibly a hardware device.\n",
+#endif
 " -certopt arg    - various certificate text options\n",
 NULL
 };
@@ -166,7 +168,7 @@ int MAIN(int argc, char **argv)
 	char *CAkeyfile=NULL,*CAserial=NULL;
 	char *alias=NULL;
 	int text=0,serial=0,hash=0,subject=0,issuer=0,startdate=0,enddate=0;
-	int ocspid=0;
+	int next_serial=0,ocspid=0;
 	int noout=0,sign_flag=0,CA_flag=0,CA_createserial=0,email=0;
 	int trustout=0,clrtrust=0,clrreject=0,aliasout=0,clrext=0;
 	int C=0;
@@ -177,13 +179,15 @@ int MAIN(int argc, char **argv)
 	X509_REQ *rq=NULL;
 	int fingerprint=0;
 	char buf[256];
-	const EVP_MD *md_alg,*digest=EVP_md5();
+	const EVP_MD *md_alg,*digest;
 	CONF *extconf = NULL;
 	char *extsect = NULL, *extfile = NULL, *passin = NULL, *passargin = NULL;
 	int need_rand = 0;
 	int checkend=0,checkoffset=0;
 	unsigned long nmflag = 0, certflag = 0;
+#ifndef OPENSSL_NO_ENGINE
 	char *engine=NULL;
+#endif
 
 	reqfile=0;
 
@@ -212,6 +216,13 @@ int MAIN(int argc, char **argv)
 	if (ctx == NULL) goto end;
 	X509_STORE_set_verify_cb_func(ctx,callb);
 
+#ifdef  OPENSSL_FIPS
+	if (FIPS_mode())
+		digest = EVP_sha1();
+	else
+#endif
+		digest = EVP_md5();
+
 	argc--;
 	argv++;
 	num=0;
@@ -354,23 +365,21 @@ int MAIN(int argc, char **argv)
 			if (--argc < 1) goto bad;
 			if (!set_name_ex(&nmflag, *(++argv))) goto bad;
 			}
-		else if (strcmp(*argv,"-setalias") == 0)
-			{
-			if (--argc < 1) goto bad;
-			alias= *(++argv);
-			trustout = 1;
-			}
+#ifndef OPENSSL_NO_ENGINE
 		else if (strcmp(*argv,"-engine") == 0)
 			{
 			if (--argc < 1) goto bad;
 			engine= *(++argv);
 			}
+#endif
 		else if (strcmp(*argv,"-C") == 0)
 			C= ++num;
 		else if (strcmp(*argv,"-email") == 0)
 			email= ++num;
 		else if (strcmp(*argv,"-serial") == 0)
 			serial= ++num;
+		else if (strcmp(*argv,"-next_serial") == 0)
+			next_serial= ++num;
 		else if (strcmp(*argv,"-modulus") == 0)
 			modulus= ++num;
 		else if (strcmp(*argv,"-pubkey") == 0)
@@ -450,7 +459,9 @@ bad:
 		goto end;
 		}
 
+#ifndef OPENSSL_NO_ENGINE
         e = setup_engine(bio_err, engine, 0);
+#endif
 
 	if (need_rand)
 		app_RAND_load_file(NULL, bio_err, 0);
@@ -589,12 +600,19 @@ bad:
 		if ((x=X509_new()) == NULL) goto end;
 		ci=x->cert_info;
 
-		if (sno)
+		if (sno == NULL)
 			{
-			if (!X509_set_serialNumber(x, sno))
+			sno = ASN1_INTEGER_new();
+			if (!sno || !rand_serial(NULL, sno))
 				goto end;
+			if (!X509_set_serialNumber(x, sno)) 
+				goto end;
+			ASN1_INTEGER_free(sno);
+			sno = NULL;
 			}
-		else if (!ASN1_INTEGER_set(X509_get_serialNumber(x),0)) goto end;
+		else if (!X509_set_serialNumber(x, sno)) 
+			goto end;
+
 		if (!X509_set_issuer_name(x,req->req_info->subject)) goto end;
 		if (!X509_set_subject_name(x,req->req_info->subject)) goto end;
 
@@ -615,7 +633,7 @@ bad:
 		if (xca == NULL) goto end;
 		}
 
-	if (!noout || text)
+	if (!noout || text || next_serial)
 		{
 		OBJ_create("2.99999.3",
 			"SET.ex3","SET x509v3 extension 3");
@@ -689,6 +707,24 @@ bad:
 				i2a_ASN1_INTEGER(STDout,x->cert_info->serialNumber);
 				BIO_printf(STDout,"\n");
 				}
+			else if (next_serial == i)
+				{
+				BIGNUM *bnser;
+				ASN1_INTEGER *ser;
+				ser = X509_get_serialNumber(x);
+				bnser = ASN1_INTEGER_to_BN(ser, NULL);
+				if (!bnser)
+					goto end;
+				if (!BN_add_word(bnser, 1))
+					goto end;
+				ser = BN_to_ASN1_INTEGER(bnser, NULL);
+				if (!ser)
+					goto end;
+				BN_free(bnser);
+				i2a_ASN1_INTEGER(out, ser);
+				ASN1_INTEGER_free(ser);
+				BIO_puts(out, "\n");
+				}
 			else if (email == i) 
 				{
 				int j;
@@ -945,9 +981,9 @@ bad:
 
 	if (checkend)
 		{
-		time_t tnow=time(NULL);
+		time_t tcheck=time(NULL) + checkoffset;
 
-		if (ASN1_UTCTIME_cmp_time_t(X509_get_notAfter(x), tnow+checkoffset) == -1)
+		if (X509_cmp_time(X509_get_notAfter(x), &tcheck) < 0)
 			{
 			BIO_printf(out,"Certificate will expire\n");
 			ret=1;
@@ -1017,108 +1053,47 @@ end:
 	sk_ASN1_OBJECT_pop_free(reject, ASN1_OBJECT_free);
 	if (passin) OPENSSL_free(passin);
 	apps_shutdown();
-	EXIT(ret);
+	OPENSSL_EXIT(ret);
 	}
 
-static ASN1_INTEGER *load_serial(char *CAfile, char *serialfile, int create)
+static ASN1_INTEGER *x509_load_serial(char *CAfile, char *serialfile, int create)
 	{
 	char *buf = NULL, *p;
-	MS_STATIC char buf2[1024];
-	ASN1_INTEGER *bs = NULL, *bs2 = NULL;
-	BIO *io = NULL;
+	ASN1_INTEGER *bs = NULL;
 	BIGNUM *serial = NULL;
+	size_t len;
 
-	buf=OPENSSL_malloc( ((serialfile == NULL)
-			?(strlen(CAfile)+strlen(POSTFIX)+1)
-			:(strlen(serialfile)))+1);
+	len = ((serialfile == NULL)
+		?(strlen(CAfile)+strlen(POSTFIX)+1)
+		:(strlen(serialfile)))+1;
+	buf=OPENSSL_malloc(len);
 	if (buf == NULL) { BIO_printf(bio_err,"out of mem\n"); goto end; }
 	if (serialfile == NULL)
 		{
-		strcpy(buf,CAfile);
+		BUF_strlcpy(buf,CAfile,len);
 		for (p=buf; *p; p++)
 			if (*p == '.')
 				{
 				*p='\0';
 				break;
 				}
-		strcat(buf,POSTFIX);
+		BUF_strlcat(buf,POSTFIX,len);
 		}
 	else
-		strcpy(buf,serialfile);
-	serial=BN_new();
-	bs=ASN1_INTEGER_new();
-	if ((serial == NULL) || (bs == NULL))
-		{
-		ERR_print_errors(bio_err);
-		goto end;
-		}
+		BUF_strlcpy(buf,serialfile,len);
 
-	io=BIO_new(BIO_s_file());
-	if (io == NULL)
-		{
-		ERR_print_errors(bio_err);
-		goto end;
-		}
-	
-	if (BIO_read_filename(io,buf) <= 0)
-		{
-		if (!create)
-			{
-			perror(buf);
-			goto end;
-			}
-		else
-			{
-			ASN1_INTEGER_set(bs,1);
-			BN_one(serial);
-			}
-		}
-	else 
-		{
-		if (!a2i_ASN1_INTEGER(io,bs,buf2,sizeof buf2))
-			{
-			BIO_printf(bio_err,"unable to load serial number from %s\n",buf);
-			ERR_print_errors(bio_err);
-			goto end;
-			}
-		else
-			{
-			serial=BN_bin2bn(bs->data,bs->length,serial);
-			if (serial == NULL)
-				{
-				BIO_printf(bio_err,"error converting bin 2 bn");
-				goto end;
-				}
-			}
-		}
+	serial = load_serial(buf, create, NULL);
+	if (serial == NULL) goto end;
 
 	if (!BN_add_word(serial,1))
 		{ BIO_printf(bio_err,"add_word failure\n"); goto end; }
-	if (!(bs2 = BN_to_ASN1_INTEGER(serial, NULL)))
-		{ BIO_printf(bio_err,"error converting bn 2 asn1_integer\n"); goto end; }
-	if (BIO_write_filename(io,buf) <= 0)
-		{
-		BIO_printf(bio_err,"error attempting to write serial number file\n");
-		perror(buf);
-		goto end;
-		}
-	i2a_ASN1_INTEGER(io,bs2);
-	BIO_puts(io,"\n");
 
-	BIO_free(io);
+	if (!save_serial(buf, NULL, serial, &bs)) goto end;
+
+ end:
 	if (buf) OPENSSL_free(buf);
-	ASN1_INTEGER_free(bs2);
 	BN_free(serial);
-	io=NULL;
 	return bs;
-
-	end:
-	if (buf) OPENSSL_free(buf);
-	BIO_free(io);
-	ASN1_INTEGER_free(bs);
-	BN_free(serial);
-	return NULL;
-
 	}
 
 static int x509_certify(X509_STORE *ctx, char *CAfile, const EVP_MD *digest,
@@ -1140,10 +1115,10 @@ static int x509_certify(X509_STORE *ctx, char *CAfile, const EVP_MD *digest,
 		goto end;
 		}
 	if (sno) bs = sno;
-	else if (!(bs = load_serial(CAfile, serialfile, create)))
+	else if (!(bs = x509_load_serial(CAfile, serialfile, create)))
 		goto end;
 
-	if (!X509_STORE_add_cert(ctx,x)) goto end;
+/*	if (!X509_STORE_add_cert(ctx,x)) goto end;*/
 
 	/* NOTE: this certificate can/should be self signed, unless it was
 	 * a certificate request in which case it is not. */

bugs/SSLv3

@@ -29,7 +29,7 @@ RC4-MD5, but a re-connect tries to use DES-CBC-SHA.  So netscape, when
 doing a re-connect, always takes the first cipher in the cipher list.
 
 If we accept a netscape connection, demand a client cert, have a
-non-self-sighed CA which does not have it's CA in netscape, and the
+non-self-signed CA which does not have it's CA in netscape, and the
 browser has a cert, it will crash/hang.  Works for 3.x and 4.xbeta
 
 Netscape browsers do not really notice the server sending a

certs/ICE-CA.pem

@@ -1,59 +0,0 @@
-Certificate:
-    Data:
-        Version: 3 (0x2)
-        Serial Number: 1 (0x1)
-        Signature Algorithm: md5WithRSAEncryption
-        Issuer: O=European ICE-TEL project, OU=V3-Certification Authority
-        Validity
-            Not Before: Apr  2 17:35:53 1997 GMT
-            Not After : Apr  2 17:35:53 1998 GMT
-        Subject: O=European ICE-TEL project, OU=V3-Certification Authority, L=Darmstadt
-        Subject Public Key Info:
-            Public Key Algorithm: rsa
-            RSA Public Key: (512 bit)
-                Modulus (512 bit):
-                    00:82:75:ba:f6:d1:60:b5:f9:15:b3:6a:dd:29:8f:
-                    8b:a4:6f:1a:88:e0:50:43:40:0b:79:41:d5:d3:16:
-                    44:7d:74:65:17:42:06:52:0b:e9:50:c8:10:cd:24:
-                    e2:ae:8d:22:30:73:e6:b4:b7:93:1f:e5:6e:a2:ae:
-                    49:11:a5:c9:45
-                Exponent: 65537 (0x10001)
-        X509v3 extensions:
-            X509v3 Authority Key Identifier: 
-                0.........z.."p......e..
-            X509v3 Subject Key Identifier: 
-                ..~r..:..B.44fu......3
-            X509v3 Key Usage: critical
-                ....
-            X509v3 Certificate Policies: critical
-                0.0...*...
-            X509v3 Subject Alternative Name: 
-                0!..secude-support@darmstadt.gmd.de
-            X509v3 Issuer Alternative Name: 
-                0I..ice-tel-ca@darmstadt.gmd.de.*http://www.darmstadt.gmd.de/ice-tel/euroca
-            X509v3 Basic Constraints: critical
-                0....
-            X509v3 CRL Distribution Points: 
-                0200...,.*http://www.darmstadt.gmd.de/ice-tel/euroca
-    Signature Algorithm: md5WithRSAEncryption
-        17:a2:88:b7:99:5a:05:41:e4:13:34:67:e6:1f:3e:26:ec:4b:
-        69:f9:3e:28:22:be:9d:1c:ab:41:6f:0c:00:85:fe:45:74:f6:
-        98:f0:ce:9b:65:53:4a:50:42:c7:d4:92:bd:d7:a2:a8:3d:98:
-        88:73:cd:60:28:79:a3:fc:48:7a
------BEGIN CERTIFICATE-----
-MIICzDCCAnagAwIBAgIBATANBgkqhkiG9w0BAQQFADBIMSEwHwYDVQQKExhFdXJv
-cGVhbiBJQ0UtVEVMIHByb2plY3QxIzAhBgNVBAsTGlYzLUNlcnRpZmljYXRpb24g
-QXV0aG9yaXR5MB4XDTk3MDQwMjE3MzU1M1oXDTk4MDQwMjE3MzU1M1owXDEhMB8G
-A1UEChMYRXVyb3BlYW4gSUNFLVRFTCBwcm9qZWN0MSMwIQYDVQQLExpWMy1DZXJ0
-aWZpY2F0aW9uIEF1dGhvcml0eTESMBAGA1UEBxMJRGFybXN0YWR0MFkwCgYEVQgB
-AQICAgADSwAwSAJBAIJ1uvbRYLX5FbNq3SmPi6RvGojgUENAC3lB1dMWRH10ZRdC
-BlIL6VDIEM0k4q6NIjBz5rS3kx/lbqKuSRGlyUUCAwEAAaOCATgwggE0MB8GA1Ud
-IwQYMBaAFIr3yNUOx3ro1yJw4AuJ1bbsZbzPMB0GA1UdDgQWBBR+cvL4OoacQog0
-NGZ1w9T80aIRMzAOBgNVHQ8BAf8EBAMCAfYwFAYDVR0gAQH/BAowCDAGBgQqAwQF
-MCoGA1UdEQQjMCGBH3NlY3VkZS1zdXBwb3J0QGRhcm1zdGFkdC5nbWQuZGUwUgYD
-VR0SBEswSYEbaWNlLXRlbC1jYUBkYXJtc3RhZHQuZ21kLmRlhipodHRwOi8vd3d3
-LmRhcm1zdGFkdC5nbWQuZGUvaWNlLXRlbC9ldXJvY2EwDwYDVR0TAQH/BAUwAwEB
-/zA7BgNVHR8ENDAyMDCgLqAshipodHRwOi8vd3d3LmRhcm1zdGFkdC5nbWQuZGUv
-aWNlLXRlbC9ldXJvY2EwDQYJKoZIhvcNAQEEBQADQQAXooi3mVoFQeQTNGfmHz4m
-7Etp+T4oIr6dHKtBbwwAhf5FdPaY8M6bZVNKUELH1JK916KoPZiIc81gKHmj/Eh6
------END CERTIFICATE-----

certs/ICE-root.pem

@@ -1,48 +0,0 @@
-Certificate:
-    Data:
-        Version: 3 (0x2)
-        Serial Number: 0 (0x0)
-        Signature Algorithm: md5WithRSAEncryption
-        Issuer: O=European ICE-TEL project, OU=V3-Certification Authority
-        Validity
-            Not Before: Apr  2 17:33:36 1997 GMT
-            Not After : Apr  2 17:33:36 1998 GMT
-        Subject: O=European ICE-TEL project, OU=V3-Certification Authority
-        Subject Public Key Info:
-            Public Key Algorithm: rsa
-            RSA Public Key: (512 bit)
-                Modulus (512 bit):
-                    00:80:3e:eb:ae:47:a9:fe:10:54:0b:81:8b:9c:2b:
-                    82:ab:3a:61:36:65:8b:f3:73:9f:ac:ac:7a:15:a7:
-                    13:8f:b4:c4:ba:a3:0f:bc:a5:58:8d:cc:b1:93:31:
-                    9e:81:9e:8c:19:61:86:fa:52:73:54:d1:97:76:22:
-                    e7:c7:9f:41:cd
-                Exponent: 65537 (0x10001)
-        X509v3 extensions:
-            X509v3 Subject Key Identifier: 
-                ........z.."p......e..
-            X509v3 Key Usage: critical
-                ....
-            X509v3 Subject Alternative Name: 
-                0I.*http://www.darmstadt.gmd.de/ice-tel/euroca..ice-tel-ca@darmstadt.gmd.de
-            X509v3 Basic Constraints: critical
-                0....
-    Signature Algorithm: md5WithRSAEncryption
-        76:69:61:db:b7:cf:8b:06:9e:d8:8c:96:53:d2:4d:a8:23:a6:
-        03:44:e8:8f:24:a5:c0:84:a8:4b:77:d4:2d:2b:7d:37:91:67:
-        f2:2c:ce:02:31:4c:6b:cc:ce:f2:68:a6:11:11:ab:7d:88:b8:
-        7e:22:9f:25:06:60:bd:79:30:3d
------BEGIN CERTIFICATE-----
-MIICFjCCAcCgAwIBAgIBADANBgkqhkiG9w0BAQQFADBIMSEwHwYDVQQKExhFdXJv
-cGVhbiBJQ0UtVEVMIHByb2plY3QxIzAhBgNVBAsTGlYzLUNlcnRpZmljYXRpb24g
-QXV0aG9yaXR5MB4XDTk3MDQwMjE3MzMzNloXDTk4MDQwMjE3MzMzNlowSDEhMB8G
-A1UEChMYRXVyb3BlYW4gSUNFLVRFTCBwcm9qZWN0MSMwIQYDVQQLExpWMy1DZXJ0
-aWZpY2F0aW9uIEF1dGhvcml0eTBZMAoGBFUIAQECAgIAA0sAMEgCQQCAPuuuR6n+
-EFQLgYucK4KrOmE2ZYvzc5+srHoVpxOPtMS6ow+8pViNzLGTMZ6BnowZYYb6UnNU
-0Zd2IufHn0HNAgMBAAGjgZcwgZQwHQYDVR0OBBYEFIr3yNUOx3ro1yJw4AuJ1bbs
-ZbzPMA4GA1UdDwEB/wQEAwIB9jBSBgNVHREESzBJhipodHRwOi8vd3d3LmRhcm1z
-dGFkdC5nbWQuZGUvaWNlLXRlbC9ldXJvY2GBG2ljZS10ZWwtY2FAZGFybXN0YWR0
-LmdtZC5kZTAPBgNVHRMBAf8EBTADAQH/MA0GCSqGSIb3DQEBBAUAA0EAdmlh27fP
-iwae2IyWU9JNqCOmA0TojySlwISoS3fULSt9N5Fn8izOAjFMa8zO8mimERGrfYi4
-fiKfJQZgvXkwPQ==
------END CERTIFICATE-----

certs/ICE-user.pem

@@ -1,63 +0,0 @@
-Certificate:
-    Data:
-        Version: 3 (0x2)
-        Serial Number: 1 (0x1)
-        Signature Algorithm: md5WithRSAEncryption
-        Issuer: O=European ICE-TEL project, OU=V3-Certification Authority, L=Darmstadt
-        Validity
-            Not Before: Apr  2 17:35:59 1997 GMT
-            Not After : Apr  2 17:35:59 1998 GMT
-        Subject: O=European ICE-TEL project, OU=V3-Certification Authority, L=Darmstadt, CN=USER
-        Subject Public Key Info:
-            Public Key Algorithm: rsa
-            RSA Public Key: (512 bit)
-                Modulus (512 bit):
-                    00:a8:a8:53:63:49:1b:93:c3:c3:0b:6c:88:11:55:
-                    de:7e:6a:e2:f9:52:a0:dc:69:25:c4:c8:bf:55:e1:
-                    31:a8:ce:e4:a9:29:85:99:8a:15:9a:de:f6:2f:e1:
-                    b4:50:5f:5e:04:75:a6:f4:76:dc:3c:0e:39:dc:3a:
-                    be:3e:a4:61:8b
-                Exponent: 65537 (0x10001)
-        X509v3 extensions:
-            X509v3 Authority Key Identifier: 
-                0...~r..:..B.44fu......3
-            X509v3 Subject Key Identifier: 
-                ...... .*...1.*.......
-            X509v3 Key Usage: critical
-                ....
-            X509v3 Certificate Policies: critical
-                0.0...*...0.......
-            X509v3 Subject Alternative Name: 
-                0:..user@darmstadt.gmd.de.!http://www.darmstadt.gmd.de/~user
-            X509v3 Issuer Alternative Name: 
-                0....gmdca@gmd.de..http://www.gmd.de..saturn.darmstadt.gmd.de.\1!0...U.
-..European ICE-TEL project1#0!..U....V3-Certification Authority1.0...U....Darmstadt..141.12.62.26
-            X509v3 Basic Constraints: critical
-                0.
-            X509v3 CRL Distribution Points: 
-                0.0.......gmdca@gmd.de
-    Signature Algorithm: md5WithRSAEncryption
-        69:0c:e1:b7:a7:f2:d8:fb:e8:69:c0:13:cd:37:ad:21:06:22:
-        4d:e8:c6:db:f1:04:0b:b7:e0:b3:d6:0c:81:03:ce:c3:6a:3e:
-        c7:e7:24:24:a4:92:64:c2:83:83:06:42:53:0e:6f:09:1e:84:
-        9a:f7:6f:63:9b:94:99:83:d6:a4
------BEGIN CERTIFICATE-----
-MIIDTzCCAvmgAwIBAgIBATANBgkqhkiG9w0BAQQFADBcMSEwHwYDVQQKExhFdXJv
-cGVhbiBJQ0UtVEVMIHByb2plY3QxIzAhBgNVBAsTGlYzLUNlcnRpZmljYXRpb24g
-QXV0aG9yaXR5MRIwEAYDVQQHEwlEYXJtc3RhZHQwHhcNOTcwNDAyMTczNTU5WhcN
-OTgwNDAyMTczNTU5WjBrMSEwHwYDVQQKExhFdXJvcGVhbiBJQ0UtVEVMIHByb2pl
-Y3QxIzAhBgNVBAsTGlYzLUNlcnRpZmljYXRpb24gQXV0aG9yaXR5MRIwEAYDVQQH
-EwlEYXJtc3RhZHQxDTALBgNVBAMTBFVTRVIwWTAKBgRVCAEBAgICAANLADBIAkEA
-qKhTY0kbk8PDC2yIEVXefmri+VKg3GklxMi/VeExqM7kqSmFmYoVmt72L+G0UF9e
-BHWm9HbcPA453Dq+PqRhiwIDAQABo4IBmDCCAZQwHwYDVR0jBBgwFoAUfnLy+DqG
-nEKINDRmdcPU/NGiETMwHQYDVR0OBBYEFJfc4B8gjSoRmLUx4Sq/ucIYiMrPMA4G
-A1UdDwEB/wQEAwIB8DAcBgNVHSABAf8EEjAQMAYGBCoDBAUwBgYECQgHBjBDBgNV
-HREEPDA6gRV1c2VyQGRhcm1zdGFkdC5nbWQuZGWGIWh0dHA6Ly93d3cuZGFybXN0
-YWR0LmdtZC5kZS9+dXNlcjCBsQYDVR0SBIGpMIGmgQxnbWRjYUBnbWQuZGWGEWh0
-dHA6Ly93d3cuZ21kLmRlghdzYXR1cm4uZGFybXN0YWR0LmdtZC5kZaRcMSEwHwYD
-VQQKExhFdXJvcGVhbiBJQ0UtVEVMIHByb2plY3QxIzAhBgNVBAsTGlYzLUNlcnRp
-ZmljYXRpb24gQXV0aG9yaXR5MRIwEAYDVQQHEwlEYXJtc3RhZHSHDDE0MS4xMi42
-Mi4yNjAMBgNVHRMBAf8EAjAAMB0GA1UdHwQWMBQwEqAQoA6BDGdtZGNhQGdtZC5k
-ZTANBgkqhkiG9w0BAQQFAANBAGkM4ben8tj76GnAE803rSEGIk3oxtvxBAu34LPW
-DIEDzsNqPsfnJCSkkmTCg4MGQlMObwkehJr3b2OblJmD1qQ=
------END CERTIFICATE-----

certs/ICE.crl

@@ -1,9 +0,0 @@
------BEGIN X509 CRL-----
-MIIBNDCBnjANBgkqhkiG9w0BAQIFADBFMSEwHwYDVQQKExhFdXJvcGVhbiBJQ0Ut
-VEVMIFByb2plY3QxIDAeBgNVBAsTF0NlcnRpZmljYXRpb24gQXV0aG9yaXR5Fw05
-NzA2MDkxNDQyNDNaFw05NzA3MDkxNDQyNDNaMCgwEgIBChcNOTcwMzAzMTQ0MjU0
-WjASAgEJFw05NjEwMDIxMjI5MjdaMA0GCSqGSIb3DQEBAgUAA4GBAH4vgWo2Tej/
-i7kbiw4Imd30If91iosjClNpBFwvwUDBclPEeMuYimHbLOk4H8Nofc0fw11+U/IO
-KSNouUDcqG7B64oY7c4SXKn+i1MWOb5OJiWeodX3TehHjBlyWzoNMWCnYA8XqFP1
-mOKp8Jla1BibEZf14+/HqCi2hnZUiEXh
------END X509 CRL-----

certs/argena.pem

@@ -0,0 +1,39 @@
+-----BEGIN CERTIFICATE-----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+-----END CERTIFICATE-----

certs/argeng.pem

@@ -0,0 +1,23 @@
+-----BEGIN CERTIFICATE-----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+-----END CERTIFICATE-----

certs/eng1.pem

@@ -0,0 +1,23 @@
+-----BEGIN CERTIFICATE-----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+-----END CERTIFICATE-----

certs/eng2.pem

@@ -0,0 +1,23 @@
+-----BEGIN CERTIFICATE-----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+-----END CERTIFICATE-----

certs/eng3.pem

@@ -0,0 +1,34 @@
+-----BEGIN CERTIFICATE-----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+-----END CERTIFICATE-----

certs/eng4.pem

@@ -0,0 +1,23 @@
+-----BEGIN CERTIFICATE-----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+-----END CERTIFICATE-----

certs/eng5.pem

@@ -0,0 +1,23 @@
+-----BEGIN CERTIFICATE-----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-----END CERTIFICATE-----

certs/expired/vsign3.pem

@@ -0,0 +1,18 @@
+subject=/C=US/O=VeriSign, Inc./OU=Class 3 Public Primary Certification Authority
+notBefore=Jan 29 00:00:00 1996 GMT
+notAfter=Jan  7 23:59:59 2004 GMT
+-----BEGIN CERTIFICATE-----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+-----END CERTIFICATE-----

certs/vsign3.pem

@@ -1,18 +1,17 @@
 subject=/C=US/O=VeriSign, Inc./OU=Class 3 Public Primary Certification Authority
 notBefore=Jan 29 00:00:00 1996 GMT
-notAfter=Jan  7 23:59:59 2004 GMT
+notAfter=Aug  1 23:59:59 2028 GMT
 -----BEGIN CERTIFICATE-----
-MIICPTCCAaYCEQDknv3zOugOz6URPhmkJAIyMA0GCSqGSIb3DQEBAgUAMF8xCzAJ
-BgNVBAYTAlVTMRcwFQYDVQQKEw5WZXJpU2lnbiwgSW5jLjE3MDUGA1UECxMuQ2xh
-c3MgMyBQdWJsaWMgUHJpbWFyeSBDZXJ0aWZpY2F0aW9uIEF1dGhvcml0eTAeFw05
-NjAxMjkwMDAwMDBaFw0wNDAxMDcyMzU5NTlaMF8xCzAJBgNVBAYTAlVTMRcwFQYD
-VQQKEw5WZXJpU2lnbiwgSW5jLjE3MDUGA1UECxMuQ2xhc3MgMyBQdWJsaWMgUHJp
-bWFyeSBDZXJ0aWZpY2F0aW9uIEF1dGhvcml0eTCBnzANBgkqhkiG9w0BAQEFAAOB
-jQAwgYkCgYEAyVxZnvIbigEUtBDfBEDb41evakVAj4QMC9Ez2dkRz+4CWB8l9yqo
-RAWq7AMfeH+ek7maAKojfdashaJjRcdyJ8z0TMZ1cdI5709C8HXfCpDGjiBvmA/4
-rCNfcCk2pMmG57GaIMtTpYXnPb59mv4kRTPcdhXtD6JxZExlLoFoRacCAwEAATAN
-BgkqhkiG9w0BAQIFAAOBgQBhcOwvP579K+ZoVCGwZ3kIDCCWMYoNer62Jt95LCJp
-STbjl3diYaIy13pUITa6Ask05yXaRDWw0lyAXbOU+Pms7qRgdSoflUkjsUp89LNH
-ciFbfperVKxi513srpvSybIk+4Kt6WcVS7qqpvCXoPawl1cAyAw8CaCCBLpB2veZ
-pA==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 -----END CERTIFICATE-----

certs/wellsfgo.pem

@@ -0,0 +1,23 @@
+-----BEGIN CERTIFICATE-----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+-----END CERTIFICATE-----

config

@@ -23,6 +23,7 @@
 PREFIX=""
 SUFFIX=""
 TEST="false"
+EXE=""
 
 # pick up any command line args to config
 for i
@@ -53,6 +54,22 @@ SYSTEM=`(uname -s) 2>/dev/null`  || SYSTEM="unknown"
 VERSION=`(uname -v) 2>/dev/null` || VERSION="unknown"
 
 
+
+ 
+
+# Check for VC++ presence first.
+#
+#if [ "x$MSVCDIR" != "x" -o "x$VCINSTALLDIR" != "x" ]; then
+#	perl Configure VC-WIN32 $*
+#	cmd /c ms\\do_masm.bat
+#	perl util/mk1mf.pl VC-WIN32-GMAKE >mak.tmp
+#	rm Makefile
+#	mv mak.tmp Makefile
+#	echo "Configured for VC++ using GNU make"
+#	exit 0
+#fi
+#
+
 # Now test for ISC and SCO, since it is has a braindamaged uname.
 #
 # We need to work around FreeBSD 1.1.5.1 
@@ -74,34 +91,27 @@ if [ "x$XREL" != "x" ]; then
 		echo "whatever-whatever-sco5"; exit 0
 		;;
 	    4.2MP)
-		if [ "x$VERSION" = "x2.01" ]; then
-		    echo "${MACHINE}-whatever-unixware201"; exit 0
-		elif [ "x$VERSION" = "x2.02" ]; then
-		    echo "${MACHINE}-whatever-unixware202"; exit 0
-		elif [ "x$VERSION" = "x2.03" ]; then
-		    echo "${MACHINE}-whatever-unixware203"; exit 0
-		elif [ "x$VERSION" = "x2.1.1" ]; then
-		    echo "${MACHINE}-whatever-unixware211"; exit 0
-		elif [ "x$VERSION" = "x2.1.2" ]; then
-		    echo "${MACHINE}-whatever-unixware212"; exit 0
-		elif [ "x$VERSION" = "x2.1.3" ]; then
-		    echo "${MACHINE}-whatever-unixware213"; exit 0
-		else
-		    echo "${MACHINE}-whatever-unixware2"; exit 0
-		fi
+		case "x${VERSION}" in
+		    x2.0*) echo "whatever-whatever-unixware20"; exit 0 ;;
+		    x2.1*) echo "whatever-whatever-unixware21"; exit 0 ;;
+		    x2*)   echo "whatever-whatever-unixware2";  exit 0 ;;
+		esac
 		;;
 	    4.2)
-		echo "whatever-whatever-unixware1"; exit 0
-		;;
-	    OpenUNIX)
-		if [ "`echo x$VERSION | sed -e 's/\..*//'`" = "x8" ]; then
-		    echo "${MACHINE}-unknown-OpenUNIX${VERSION}"; exit 0
-		fi
+		echo "i386-whatever-unixware1"; exit 0
 		;;
 	    5)
-		if [ "`echo x$VERSION | sed -e 's/\..*//'`" = "x7" ]; then
-		    echo "${MACHINE}-sco-unixware7"; exit 0
-		fi
+		case "x${VERSION}" in
+		    # We hardcode i586 in place of ${MACHINE} for the
+		    # following reason. The catch is that even though Pentium
+		    # is minimum requirement for platforms in question,
+		    # ${MACHINE} gets always assigned to i386. Now, problem
+		    # with i386 is that it makes ./config pass 386 to
+		    # ./Configure, which in turn makes make generate
+		    # inefficient SHA-1 (for this moment) code.
+		    x7*)  echo "i586-sco-unixware7";           exit 0 ;;
+		    x8*)  echo "i586-unkn-OpenUNIX${VERSION}"; exit 0 ;;
+		esac
 		;;
 	esac
     fi
@@ -117,16 +127,16 @@ case "${SYSTEM}:${RELEASE}:${VERSION}:${MACHINE}" in
 	echo "m68k-apple-aux3"; exit 0
 	;;
 
-    AIX:[3456789]:4:*)
-	echo "${MACHINE}-ibm-aix43"; exit 0
+    AIX:[3-9]:4:*)
+	echo "${MACHINE}-ibm-aix"; exit 0
 	;;
 
-    AIX:*:[56789]:*)
-	echo "${MACHINE}-ibm-aix43"; exit 0
+    AIX:*:[5-9]:*)
+	echo "${MACHINE}-ibm-aix"; exit 0
 	;;
 
     AIX:*)
-	echo "${MACHINE}-ibm-aix"; exit 0
+	echo "${MACHINE}-ibm-aix3"; exit 0
 	;;
 
     dgux:*)
@@ -141,7 +151,7 @@ case "${SYSTEM}:${RELEASE}:${VERSION}:${MACHINE}" in
 	HPUXVER=`echo ${RELEASE}|sed -e 's/[^.]*.[0B]*//'`
 	case "$HPUXVER" in
 	    1[0-9].*)	# HPUX 10 and 11 targets are unified
-		echo "${MACHINE}-hp-hpux10"; exit 0
+		echo "${MACHINE}-hp-hpux1x"; exit 0
 		;;
 	    *)
 		echo "${MACHINE}-hp-hpux"; exit 0
@@ -196,7 +206,7 @@ case "${SYSTEM}:${RELEASE}:${VERSION}:${MACHINE}" in
 	echo "${MACHINE}-whatever-bsdi"; exit 0
 	;;
 
-    FreeBSD:*)
+    FreeBSD:*:*:*386*)
         VERS=`echo ${RELEASE} | sed -e 's/[-(].*//'`
         MACH=`sysctl -n hw.model`
         ARCH='whatever'
@@ -205,7 +215,6 @@ case "${SYSTEM}:${RELEASE}:${VERSION}:${MACHINE}" in
            *486*       ) MACH="i486"     ;;
            Pentium\ II*) MACH="i686"     ;;
            Pentium*    ) MACH="i586"     ;;
-           Alpha*      ) MACH="alpha"    ;;
            *           ) MACH="$MACHINE" ;;
         esac
         case ${MACH} in
@@ -214,6 +223,10 @@ case "${SYSTEM}:${RELEASE}:${VERSION}:${MACHINE}" in
         echo "${MACH}-${ARCH}-freebsd${VERS}"; exit 0
         ;;
 
+    FreeBSD:*)
+	echo "${MACHINE}-whatever-freebsd"; exit 0
+	;;
+
     NetBSD:*:*:*386*)
         echo "`(/usr/sbin/sysctl -n hw.model || /sbin/sysctl -n hw.model) | sed 's,.*\(.\)86-class.*,i\186,'`-whatever-netbsd"; exit 0
 	;;
@@ -292,6 +305,14 @@ case "${SYSTEM}:${RELEASE}:${VERSION}:${MACHINE}" in
 	echo "${MACHINE}-whatever-sysv4"; exit 0
 	;;
 
+    VOS:*:*:i786)
+     echo "i386-stratus-vos"; exit 0
+     ;;
+
+    VOS:*:*:*)
+     echo "hppa1.1-stratus-vos"; exit 0
+     ;;
+
     *:4*:R4*:m88k)
 	echo "${MACHINE}-whatever-sysv4"; exit 0
 	;;
@@ -332,6 +353,13 @@ case "${SYSTEM}:${RELEASE}:${VERSION}:${MACHINE}" in
 	echo "mips-sony-newsos4"; exit 0;
 	;;
 
+    MINGW*)
+	echo "${MACHINE}-whatever-mingw"; echo 0;
+	# Save fipslib path so VC++ build can find it
+	(cd /usr/local/ssl/lib ; pwd -W ) > util/fipslib_path.txt
+	# Extract _chkstk.o so VC++ can use it, to avoid __alloca link error
+	(cd ms ; ar x `gcc -print-libgcc-file-name` _chkstk.o)
+	;;
     CYGWIN*)
 	case "$RELEASE" in
 	    [bB]*|1.0|1.[12].*)
@@ -414,9 +442,10 @@ if [ "$SYSTEM" = "HP-UX" ];then
   GCC_BITS="32"
   if [ $GCCVER -ge 30 ]; then
     # PA64 support only came in with gcc 3.0.x.
-    # We look for the preprocessor symbol __LP64__ indicating
-    # 64bit bit long and pointer.  sizeof(int) == 32 on HPUX64.
-    if gcc -v -E -x c /dev/null 2>&1 | grep __LP64__ > /dev/null; then
+    # We check if the preprocessor symbol __LP64__ is defined...
+    if echo "__LP64__" | gcc -v -E -x c - 2>/dev/null | grep "^__LP64__" 2>&1 > /dev/null; then
+      : # __LP64__ has slipped through, it therefore is not defined
+    else
       GCC_BITS="64"
     fi
   fi
@@ -436,7 +465,7 @@ if [ "$SYSTEM" = "SunOS" ]; then
   	egrep -e '^cc: .* C [0-9]\.[0-9]' | \
 	sed 's/.* C \([0-9]\)\.\([0-9]\).*/\1\2/'`
   CCVER=${CCVER:-0}
-  if [ $CCVER -gt 40 ]; then
+  if [ $MACHINE != i86pc -a $CCVER -gt 40 ]; then
     CC=cc	# overrides gcc!!!
     if [ $CCVER -eq 50 ]; then
       echo "WARNING! Detected WorkShop C 5.0. Do make sure you have"
@@ -461,6 +490,10 @@ if [ "${SYSTEM}-${MACHINE}" = "Linux-alpha" ]; then
   fi
 fi
 
+if [ "${SYSTEM}" = "AIX" ]; then	# favor vendor cc over gcc
+    (cc) 2>&1 | grep -iv "not found" > /dev/null && CC=cc
+fi
+
 CCVER=${CCVER:-0}
 
 # read the output of the embedded GuessOS 
@@ -473,7 +506,7 @@ echo Operating system: $GUESSOS
 # more time that I want to waste at the moment
 case "$GUESSOS" in
   mips2-sgi-irix)
-	CPU=`(hinv -t cpu) 2>/dev/null | sed 's/^CPU:[^R]*R\([0-9]*\).*/\1/'`
+	CPU=`(hinv -t cpu) 2>/dev/null | head -1 | sed 's/^CPU:[^R]*R\([0-9]*\).*/\1/'`
 	CPU=${CPU:-0}
 	if [ $CPU -ge 4000 ]; then
 		options="$options -mips2"
@@ -481,29 +514,29 @@ case "$GUESSOS" in
 	OUT="irix-$CC"
 	;;
   mips3-sgi-irix)
-	CPU=`(hinv -t cpu) 2>/dev/null | sed 's/^CPU:[^R]*R\([0-9]*\).*/\1/'`
-	CPU=${CPU:-0}
-	if [ $CPU -ge 5000 ]; then
-		options="$options -mips4"
-	else
-		options="$options -mips3"
-	fi
+	#CPU=`(hinv -t cpu) 2>/dev/null | head -1 | sed 's/^CPU:[^R]*R\([0-9]*\).*/\1/'`
+	#CPU=${CPU:-0}
+	#if [ $CPU -ge 5000 ]; then
+	#	options="$options -mips4"
+	#else
+	#	options="$options -mips3"
+	#fi
 	OUT="irix-mips3-$CC"
 	;;
   mips4-sgi-irix64)
 	echo "WARNING! If you wish to build 64-bit library, then you have to"
 	echo "         invoke './Configure irix64-mips4-$CC' *manually*."
-	if [ "$TEST" = "false" ]; then
+	if [ "$TEST" = "false" -a -t 1 ]; then
 	  echo "         You have about 5 seconds to press Ctrl-C to abort."
-	  (stty -icanon min 0 time 50; read waste) < /dev/tty
+	  (trap "stty `stty -g`" 2 0; stty -icanon min 0 time 50; read waste) <&1
 	fi
-        CPU=`(hinv -t cpu) 2>/dev/null | sed 's/^CPU:[^R]*R\([0-9]*\).*/\1/'`
-        CPU=${CPU:-0}
-        if [ $CPU -ge 5000 ]; then
-                options="$options -mips4"
-        else
-                options="$options -mips3"
-        fi
+        #CPU=`(hinv -t cpu) 2>/dev/null | head -1 | sed 's/^CPU:[^R]*R\([0-9]*\).*/\1/'`
+        #CPU=${CPU:-0}
+        #if [ $CPU -ge 5000 ]; then
+        #        options="$options -mips4"
+        #else
+        #        options="$options -mips3"
+        #fi
 	OUT="irix-mips3-$CC"
 	;;
   alpha-*-linux2)
@@ -537,9 +570,14 @@ EOF
 	rm dummy dummy.c
 	;;
   ppc64-*-linux2)
-	#Use the standard target for PPC architecture until we create a
-	#special one for the 64bit architecture.
-	OUT="linux-ppc" ;;
+	echo "WARNING! If you wish to build 64-bit library, then you have to"
+	echo "         invoke './Configure linux-ppc64' *manually*."
+	if [ "$TEST" = "false" -a -t 1 ]; then
+	    echo "         You have about 5 seconds to press Ctrl-C to abort."
+	    (trap "stty `stty -g`" 2 0; stty -icanon min 0 time 50; read waste) <&1
+	fi
+	OUT="linux-ppc"
+	;;
   ppc-*-linux2) OUT="linux-ppc" ;;
   m68k-*-linux*) OUT="linux-m68k" ;;
   ia64-*-linux?) OUT="linux-ia64" ;;
@@ -547,12 +585,13 @@ EOF
   ppc-apple-darwin*) OUT="darwin-ppc-cc" ;;
   i386-apple-darwin*) OUT="darwin-i386-cc" ;;
   sparc64-*-linux2)
-	#Before we can uncomment following lines we have to wait at least
-	#till 64-bit glibc for SPARC is operational:-(
-	#echo "WARNING! If you wish to build 64-bit library, then you have to"
-	#echo "         invoke './Configure linux64-sparcv9' *manually*."
-	#echo "         Type return if you want to continue, Ctrl-C to abort."
-	#read waste < /dev/tty
+	echo "WARNING! If you *know* that your GNU C supports 64-bit/V9 ABI"
+	echo "         and wish to build 64-bit library, then you have to"
+	echo "         invoke './Configure linux64-sparcv9' *manually*."
+	if [ "$TEST" = "false" -a -t 1 ]; then
+	  echo "          You have about 5 seconds to press Ctrl-C to abort."
+	  (trap "stty `stty -g`" 2 0; stty -icanon min 0 time 50; read waste) <&1
+	fi
 	OUT="linux-sparcv9" ;;
   sparc-*-linux2)
 	KARCH=`awk '/^type/{print$3}' /proc/cpuinfo`
@@ -582,9 +621,12 @@ EOF
 
 	options="$options -mschedule=$CPUSCHEDULE -march=$CPUARCH"
 	OUT="linux-parisc" ;;
-  arm*-*-linux2) OUT="linux-elf-arm" ;;
+  arm*b-*-linux2) OUT="linux-elf-arm"; options="$options -DB_ENDIAN" ;;
+  arm*l-*-linux2) OUT="linux-elf-arm"; options="$options -DL_ENDIAN" ;;
+  arm*-*-linux2)  OUT="linux-elf-arm" ;;
   s390-*-linux2) OUT="linux-s390" ;;
   s390x-*-linux?) OUT="linux-s390x" ;;
+  x86_64-*-linux?) OUT="linux-x86_64" ;;
   *-*-linux2) OUT="linux-elf"
 	if [ "$GCCVER" -gt 28 ]; then
           if grep '^model.*Pentium' /proc/cpuinfo >/dev/null ; then
@@ -605,9 +647,9 @@ EOF
 	    if [ "$CC" = "cc" -a $CCVER -ge 50 ]; then
 		echo "WARNING! If you wish to build 64-bit library, then you have to"
 		echo "         invoke './Configure solaris64-sparcv9-cc' *manually*."
-		if [ "$TEST" = "false" ]; then
+		if [ "$TEST" = "false" -a -t 1 ]; then
 		  echo "         You have about 5 seconds to press Ctrl-C to abort."
-		  (stty -icanon min 0 time 50; read waste) < /dev/tty
+		  (trap "stty `stty -g`" 2 0; stty -icanon min 0 time 50; read waste) <&1
 		fi
 	    elif [ "$CC" = "gcc" -a "$GCC_ARCH" = "-m64" ]; then
 		# $GCC_ARCH denotes default ABI chosen by compiler driver
@@ -617,17 +659,17 @@ EOF
 		OUT="solaris64-sparcv9-gcc"
 		echo "WARNING! If you wish to build 32-bit library, then you have to"
 		echo "         invoke './Configure solaris-sparcv9-gcc' *manually*."
-		if [ "$TEST" = "false" ]; then
+		if [ "$TEST" = "false" -a -t 1 ]; then
 		  echo "         You have about 5 seconds to press Ctrl-C to abort."
-		  (stty -icanon min 0 time 50; read waste) < /dev/tty
+		  (trap "stty `stty -g`" 2 0; stty -icanon min 0 time 50; read waste) <&1
 		fi
 	    elif [ "$GCC_ARCH" = "-m32" ]; then
 		echo "NOTICE! If you *know* that your GNU C supports 64-bit/V9 ABI"
 		echo "        and wish to build 64-bit library, then you have to"
 		echo "        invoke './Configure solaris64-sparcv9-gcc' *manually*."
-		if [ "$TEST" = "false" ]; then
+		if [ "$TEST" = "false" -a -t 1 ]; then
 		  echo "         You have about 5 seconds to press Ctrl-C to abort."
-		  (stty -icanon min 0 time 50; read waste) < /dev/tty
+		  (trap "stty `stty -g`" 2 0; stty -icanon min 0 time 50; read waste) <&1
 		fi
 	    fi
 	fi
@@ -635,9 +677,18 @@ EOF
   sun4m-*-solaris2)	OUT="solaris-sparcv8-$CC" ;;
   sun4d-*-solaris2)	OUT="solaris-sparcv8-$CC" ;;
   sun4*-*-solaris2)	OUT="solaris-sparcv7-$CC" ;;
-  *86*-*-solaris2) OUT="solaris-x86-$CC" ;;
+  *86*-*-solaris2)
+	ISA64=`(isalist) 2>/dev/null | grep amd64`
+	if [ "$ISA64" != "" ]; then
+	    OUT="solaris64-x86_64-$CC"
+	else
+	    OUT="solaris-x86-$CC"
+	fi
+	;;
   *-*-sunos4) OUT="sunos-$CC" ;;
   alpha*-*-freebsd*) OUT="FreeBSD-alpha" ;;
+  sparc64-*-freebsd*) OUT="FreeBSD-sparc64" ;;
+  ia64-*-freebsd*) OUT="FreeBSD-ia64" ;;
   *-freebsd[3-9]*) OUT="FreeBSD-elf" ;;
   *-freebsd[1-2]*) OUT="FreeBSD" ;;
   *86*-*-netbsd) OUT="NetBSD-x86" ;;
@@ -674,6 +725,10 @@ EOF
   *-*-UnixWare21*) OUT="unixware-2.1" ;;
   *-*-Unixware20*) OUT="unixware-2.0" ;;
   *-*-Unixware21*) OUT="unixware-2.1" ;;
+  *-*-vos)
+	options="$options no-threads no-shared no-asm no-dso"
+	EXE=".pm"
+	OUT="vos-$CC" ;;
   BS2000-siemens-sysv4) OUT="BS2000-OSD" ;;
   RM*-siemens-sysv4) OUT="ReliantUNIX" ;;
   *-siemens-sysv4) OUT="SINIX" ;;
@@ -681,7 +736,7 @@ EOF
 	if [ $CC = "gcc" ];
 	then
 	  if [ $GCC_BITS = "64" ]; then
-	    OUT="hpux64-parisc-gcc"
+	    OUT="hpux64-parisc2-gcc"
 	  else
 	    OUT="hpux-parisc-gcc"
 	  fi
@@ -694,10 +749,12 @@ EOF
 	CPU_VERSION=${CPU_VERSION:-0}
 	# See <sys/unistd.h> for further info on CPU_VERSION.
 	if   [ $CPU_VERSION -ge 768 ]; then	# IA-64 CPU
-	     echo "NOTICE! 64-bit is the only ABI currently operational on HP-UXi."
-	     echo "        Post request to openssl-dev@openssl.org for 32-bit support."
-	     if [ "$TEST" = "false" ]; then
-		(stty -icanon min 0 time 50; read waste) < /dev/tty
+	     echo "WARNING! 64-bit ABI is the default configured ABI on HP-UXi."
+	     echo "         If you wish to build 32-bit library, the you have to"
+	     echo "         invoke './Configure hpux-ia64-cc' *manually*."
+	     if [ "$TEST" = "false" -a -t 1 ]; then
+		echo "         You have about 5 seconds to press Ctrl-C to abort."
+		(trap "stty `stty -g`" 2 0; stty -icanon min 0 time 50; read waste) <&1
 	     fi
 	     OUT="hpux64-ia64-cc"
 	elif [ $CPU_VERSION -ge 532 ]; then	# PA-RISC 2.x CPU
@@ -707,9 +764,9 @@ EOF
 	     if [ $KERNEL_BITS -eq 64 -a "$CC" = "cc" ]; then
 		echo "WARNING! If you wish to build 64-bit library then you have to"
 		echo "         invoke './Configure hpux64-parisc2-cc' *manually*."
-		if [ "$TEST" = "false" ]; then
+		if [ "$TEST" = "false" -a -t 1 ]; then
 		  echo "         You have about 5 seconds to press Ctrl-C to abort."
-		  (stty -icanon min 0 time 50; read waste) < /dev/tty
+		  (trap "stty `stty -g`" 2 0; stty -icanon min 0 time 50; read waste) <&1
 		fi
 	     fi
 	elif [ $CPU_VERSION -ge 528 ]; then	# PA-RISC 1.1+ CPU
@@ -721,8 +778,28 @@ EOF
 	fi
 	options="$options -D_REENTRANT" ;;
   *-hpux)	OUT="hpux-parisc-$CC" ;;
+  *-aix)
+	KERNEL_BITS=`(getconf KERNEL_BITMODE) 2>/dev/null`
+	KERNEL_BITS=${KERNEL_BITS:-32}
+	OBJECT_MODE=${OBJECT_MODE:-32}
+	if [ "$CC" = "gcc" ]; then
+	    OUT="aix-gcc"
+	elif [ $OBJECT_MODE -eq 64 ]; then
+	    echo 'Your $OBJECT_MODE was found to be set to 64' 
+	    OUT="aix64-cc"
+	else
+	    OUT="aix-cc"
+	    if [ $KERNEL_BITS -eq 64 ]; then
+		echo "WARNING! If you wish to build 64-bit kit, then you have to"
+		echo "         invoke './Configure aix64-cc' *manually*."
+		if [ "$TEST" = "false" -a -t 1 ]; then
+		    echo "         You have ~5 seconds to press Ctrl-C to abort."
+		    (trap "stty `stty -g`" 2 0; stty -icanon min 0 time 50; read waste) <&1
+		fi
+	    fi
+	fi
+	;;
   # these are all covered by the catchall below
-  # *-aix) OUT="aix-$CC" ;;
   # *-dgux) OUT="dgux" ;;
   mips-sony-newsos4) OUT="newsos4-gcc" ;;
   *-*-cygwin_pre1.3) OUT="Cygwin-pre1.3" ;;
@@ -799,8 +876,8 @@ fi
 
 if [ ".$PERL" = . ] ; then
 	for i in . `echo $PATH | sed 's/:/ /g'`; do
-		if [ -f "$i/perl5" ] ; then
-			PERL="$i/perl5"
+		if [ -f "$i/perl5$EXE" ] ; then
+			PERL="$i/perl5$EXE"
 			break;
 		fi;
 	done
@@ -808,9 +885,9 @@ fi
 
 if [ ".$PERL" = . ] ; then
 	for i in . `echo $PATH | sed 's/:/ /g'`; do
-		if [ -f "$i/perl" ] ; then
-			if "$i/perl" -e 'exit($]<5.0)'; then
-				PERL="$i/perl"
+		if [ -f "$i/perl$EXE" ] ; then
+			if "$i/perl$EXE" -e 'exit($]<5.0)'; then
+				PERL="$i/perl$EXE"
 				break;
 			fi;
 		fi;

crypto/.cvsignore

@@ -2,3 +2,5 @@ lib
 buildinf.h
 opensslconf.h
 Makefile.save
+*.flc
+semantic.cache

crypto/Makefile

@@ -1,5 +1,5 @@
 #
-# SSLeay/crypto/Makefile
+# OpenSSL/crypto/Makefile
 #
 
 DIR=		crypto
@@ -11,10 +11,9 @@ CFLAG=		-g
 INSTALL_PREFIX=
 OPENSSLDIR=     /usr/local/ssl
 INSTALLTOP=	/usr/local/ssl
-MAKE=           make -f Makefile.ssl
 MAKEDEPPROG=	makedepend
 MAKEDEPEND=	$(TOP)/util/domd $(TOP) -MD $(MAKEDEPPROG)
-MAKEFILE=       Makefile.ssl
+MAKEFILE=       Makefile
 RM=             rm -f
 AR=		ar r
 
@@ -36,25 +35,25 @@ GENERAL=Makefile README crypto-lib.com install.com
 
 LIB= $(TOP)/libcrypto.a
 SHARED_LIB= libcrypto$(SHLIB_EXT)
-LIBSRC=	cryptlib.c mem.c mem_dbg.c cversion.c ex_data.c tmdiff.c cpt_err.c ebcdic.c uid.c o_time.c
-LIBOBJ= cryptlib.o mem.o mem_dbg.o cversion.o ex_data.o tmdiff.o cpt_err.o ebcdic.o uid.o o_time.o
+LIBSRC=	cryptlib.c mem.c mem_clr.c mem_dbg.c cversion.c ex_data.c tmdiff.c cpt_err.c ebcdic.c uid.c o_time.c o_str.c
+LIBOBJ= cryptlib.o mem.o mem_clr.o mem_dbg.o cversion.o ex_data.o tmdiff.o cpt_err.o ebcdic.o uid.o o_time.o o_str.o
 
 SRC= $(LIBSRC)
 
 EXHEADER= crypto.h tmdiff.h opensslv.h opensslconf.h ebcdic.h symhacks.h \
 	ossl_typ.h
-HEADER=	cryptlib.h buildinf.h md32_common.h o_time.h $(EXHEADER)
+HEADER=	cryptlib.h buildinf.h md32_common.h o_time.h o_str.h $(EXHEADER)
 
 ALL=    $(GENERAL) $(SRC) $(HEADER)
 
 top:
 	@(cd ..; $(MAKE) DIRS=$(DIR) all)
 
-all: buildinf.h lib subdirs shared
+all: shared
 
-buildinf.h: ../Makefile.ssl
+buildinf.h: ../Makefile
 	( echo "#ifndef MK1MF_BUILD"; \
-	echo '  /* auto-generated by crypto/Makefile.ssl for crypto/cversion.c */'; \
+	echo '  /* auto-generated by crypto/Makefile for crypto/cversion.c */'; \
 	echo '  #define CFLAGS "$(CC) $(CFLAG)"'; \
 	echo '  #define PLATFORM "$(PLATFORM)"'; \
 	echo "  #define DATE \"`LC_ALL=C LC_TIME=C date`\""; \
@@ -73,7 +72,7 @@ subdirs:
 	done;
 
 files:
-	$(PERL) $(TOP)/util/files.pl Makefile.ssl >> $(TOP)/MINFO
+	$(PERL) $(TOP)/util/files.pl Makefile >> $(TOP)/MINFO
 	@for i in $(SDIRS) ;\
 	do \
 	(cd $$i && echo "making 'files' in crypto/$$i..." && \
@@ -81,11 +80,9 @@ files:
 	done;
 
 links:
-	@$(TOP)/util/point.sh Makefile.ssl Makefile
 	@$(PERL) $(TOP)/util/mklink.pl ../include/openssl $(EXHEADER)
 	@$(PERL) $(TOP)/util/mklink.pl ../test $(TEST)
 	@$(PERL) $(TOP)/util/mklink.pl ../apps $(APPS)
-	@$(TOP)/util/point.sh Makefile.ssl Makefile
 	@for i in $(SDIRS); do \
 	(cd $$i && echo "making links in crypto/$$i..." && \
 	$(MAKE) CC='$(CC)' INCLUDES='${INCLUDES}' CFLAG='${CFLAG}' INSTALLTOP='${INSTALLTOP}' PEX_LIBS='${PEX_LIBS}' EX_LIBS='${EX_LIBS}' BN_ASM='${BN_ASM}' DES_ENC='${DES_ENC}' SHA1_ASM_OBJ='${SHA1_ASM_OBJ}' MD5_ASM_OBJ='${MD5_ASM_OBJ}' RMD160_ASM_OBJ='${RMD160_ASM_OBJ}' BF_ENC='${BF_ENC}' CAST_ENC='${CAST_ENC}' RC4_ENC='${RC4_ENC}' RC5_ENC='${RC5_ENC}' AR='${AR}' PERL='${PERL}' links ); \
@@ -96,8 +93,9 @@ lib:	$(LIBOBJ)
 	$(RANLIB) $(LIB) || echo Never mind.
 	@touch lib
 
-shared:
-	if [ -n "$(SHARED_LIBS)" ]; then \
+shared: buildinf.h lib subdirs
+	@if [ -n "$(SHARED_LIBS)" ]; then \
+		egrep 'define OPENSSL_FIPS' $(TOP)/include/openssl/opensslconf.h > /dev/null || \
 		(cd ..; $(MAKE) $(SHARED_LIB)); \
 	fi
 
@@ -116,7 +114,7 @@ tests:
 	done;
 
 install:
-	@for i in $(EXHEADER) ;\
+	@headerlist="$(EXHEADER)"; for i in $$headerlist ;\
 	do \
 	(cp $$i $(INSTALL_PREFIX)$(INSTALLTOP)/include/openssl/$$i; \
 	chmod 644 $(INSTALL_PREFIX)$(INSTALLTOP)/include/openssl/$$i ); \
@@ -141,7 +139,7 @@ depend:
 	@for i in $(SDIRS) ;\
 	do \
 	(cd $$i && echo "making depend in crypto/$$i..." && \
-	$(MAKE) MAKEFILE='${MAKEFILE}' INCLUDES='${INCLUDES}' CFLAG='${CFLAG}' DEPFLAG='${DEPFLAG}' PERL='${PERL}' depend ); \
+	$(MAKE) MAKEFILE='${MAKEFILE}' INCLUDES='${INCLUDES}' CFLAG='${CFLAG}' DEPFLAG='${DEPFLAG}' MAKEDEPPROG='${MAKEDEPPROG}' KRB5_INCLUDES='${KRB5_INCLUDES}' PERL='${PERL}' depend ); \
 	done;
 
 clean:
@@ -193,12 +191,18 @@ mem.o: ../include/openssl/err.h ../include/openssl/lhash.h
 mem.o: ../include/openssl/opensslconf.h ../include/openssl/opensslv.h
 mem.o: ../include/openssl/safestack.h ../include/openssl/stack.h
 mem.o: ../include/openssl/symhacks.h cryptlib.h mem.c
+mem_clr.o: ../include/openssl/crypto.h ../include/openssl/e_os2.h
+mem_clr.o: ../include/openssl/opensslconf.h ../include/openssl/opensslv.h
+mem_clr.o: ../include/openssl/safestack.h ../include/openssl/stack.h
+mem_clr.o: ../include/openssl/symhacks.h mem_clr.c
 mem_dbg.o: ../e_os.h ../include/openssl/bio.h ../include/openssl/buffer.h
 mem_dbg.o: ../include/openssl/crypto.h ../include/openssl/e_os2.h
 mem_dbg.o: ../include/openssl/err.h ../include/openssl/lhash.h
 mem_dbg.o: ../include/openssl/opensslconf.h ../include/openssl/opensslv.h
 mem_dbg.o: ../include/openssl/safestack.h ../include/openssl/stack.h
 mem_dbg.o: ../include/openssl/symhacks.h cryptlib.h mem_dbg.c
+o_str.o: ../e_os.h ../include/openssl/e_os2.h ../include/openssl/opensslconf.h
+o_str.o: o_str.c o_str.h
 o_time.o: ../include/openssl/e_os2.h ../include/openssl/opensslconf.h o_time.c
 o_time.o: o_time.h
 tmdiff.o: ../e_os.h ../include/openssl/bio.h ../include/openssl/buffer.h