This prevents a duplicate memcpy of a 128-byte struct every time
set_scale_factors() is called (which is a lot), thus leading to a
decrease from 3.7 MB to 1.85 MB of struct copying per 64x64 block
RD/partition loop.
Overall, this decreases encoding time of the first 50 frames of bus
@ 1500kbps (speed 0) from 1min5.9 to 1min4.9, i.e. about a 1.5%
overall speedup. We can likely get more gains by removing the copy
of the other struct (and replacing it with an indexing) as well.
Change-Id: I3dceb7e79f71e6fe911b11cc994cf89a869dde7a
these are only used in the encoder.
frames_since_golden / frames_till_alt_ref_frame -> VP[89]_COMP
Change-Id: Ie14a6f46987bced685ddb449b85dc261caba6dfe
These arrays have constant values (no any updates). Removing two
corresponding memcpy calls. Making a little cleanup in vp9_entropymode.h
as well: removing redundant 'extern' keyword and moving all function
declarations at the end.
Change-Id: Ia16b38b46aec2e2500f5df29c40a297ae241dede
Call the individually optimized horizontal and vertical functions. This
implementation abuses the temp buffer.
This will be replaced with a custom optimized function.
Over 2x speedup.
Change-Id: I5b908d2a73d264e9810d6022bbff73207a3055dd
Removing tile_rows and tile_columns from VP9Common, removing redundant
constants MIN_TILE_WIDTH and MAX_TILE_WIDTH, changing signature of
vp9_get_tile_n_bits.
Change-Id: I8ff3104a38179b2c6900df965c144c1d6f602267
Cosmetic code changes, renaming 'flat' local var to 'mask', removing
unused field 'blim' from loopfilter_info_n and loop_filter_info structs.
Change-Id: I51e6ccf727fe361ad9a08e29e1201aa7abd4987f
This commit enables SSE2 implementation of 16x16 inverse ADST/DCT
hybrid transform. The runtime goes from 5742 cycles -> 1821 cycles.
This provides about 1% encoding speed-up at speed 0.
Change-Id: I1678d0988bf30b9efd524877705bbb3645edb17b
Making implementation of vp9_set_pred_flag_{seg_id, mbskip} consistent
with vp9_get_segment_id without using confusing sub(a, b) macro. Passing
mi_row and mi_col to functions explicitly instead of replying on
mb_to_right_edge and mb_to_bottom_edge.
Change-Id: I54c1087dd2ba9036f8ba7eb165b073e807d00435
In the prior code, the above context pointers used for entropy
decoding were initialized on the first frame, and not updated when
the frame size changed. The per-frame code which initializes the
contexts assumes that the contexts are contiguous, leading to an
incomplete initialization when the frame is smaller. This commit
updates the pointers so that the context is contigous whenever
the frame size changes.
Change-Id: I08b53e3a30c8289491212311682ff1b8028cff6c
This is a short term optimization till we work out a decoder
implementation requiring no frame border extension.
Change-Id: I02d15bfde4d926b50a4e58b393d8c4062d1be70f
Renaming flatmask4 to flat_mask4, flatmask5 to flat_mask5, hevmask to
hev_mask, filter to filter4, mbfilter to filter8, wide_mbfilter to
filter16.
Change-Id: Ic61c73e59c2eee505257584867aafac99833cea1
Change the mbfilter Neon code from executing both branches if all
vectors follow only one branch.
The code is about 5% faster when executing only one branch and about
1% slower when executing both branches.
-PS5: Remove local stack space from mbfilter.
Change-Id: I6a23f9b318a9f4568a2718b4c9348db988fe2182
This commit enables SSE2 implementation of 8x8 inverse ADST/DCT
transform. The runtime goes from 1216 cycles -> 266 cycles.
For bus_cif at 2000 kbps, the overall runtime reduces from
253707ms -> 248430ms, i.e., 2% speed-up at speed 0.
Change-Id: Ib0372e17e9162d7b11a10d653b1c8be547c878fb
Adding missed parenthesis around boolean expressions. Bitstream is changed.
Regenerating test vectors.
Change-Id: I4cc00b761e9473f92f180a9fc3a0c607f0aaae56
Super basic conversion from the other implementations. Any changes to
one should be trivial to copy over keep in sync.
Change-Id: I1720b4128e0aba4b2779e3761f6494f8a09d3ea8
this was never fleshed out in the context of VP8, for which it was
added. for VP9 it has no meaning.
Change-Id: Iba2ecc026d9e947067b96690245d337e51e26eff
Implements some of the helper functions more efficiently with
lookups rathers than branches. Modeling function is consolidated
to reduce some computations.
Also merged the two enums BLOCK_SIZE_TYPES and BlockSize into
one because there is no need to keep them separate (even though
the semantics are a little different).
No bitstream or output change.
About 0.5% speedup
Change-Id: I7d71a66e8031ddb340744dc493f22976052b8f9f
Adding segmentation struct to vp9_seg_common.h. Struct members are from
macroblockd and VP9Common structs. Moving segmentation related constants
and enums to vp9_seg_common.h.
Change-Id: I23fabc33f11a359249f5f80d161daf569d02ec03
Independent horizontal and vertical implementations.
Requires that blocks be built from 4x4 and [xy]_step_q4 == 16
6-10% improvement. CIF improved the least.
Change-Id: I137f5ceae4440adc0960bf88e4453e55a618bcda
Enable SSE2 4x4 inverse ADST/DCT transform. The runtime goes from
292 cycles down to 89 cycles. Running bus_cif at 2000 kbps, the
overall runtime of speed 0 goes from 301s to 295s (2% speed-up).
Change-Id: I24098136e7fee7ab2fbf1c11755bdf2ca37f3628
Where possible, do the 16 pixel wide filter while doing the horizontal
filtering pass. The same approach can be taken for the mbloop_filter
when that's implemented. Doing so on the vertical pass is a little more
involved, but possible.
Change-Id: I010cb505e623464247ae8f67fa25a0cdac091320
Adds a speed feature to eliminate full-rd computation if the modeled
rd or rd based on a different parameter in the same mode is already
a lot larger than the best rd yet.
Specifically, only search the sharp and smooth filters if the modeled
rd cost based on the regular filter is within a certain factor of the
best rd cost so far. Also, skip full-rd computation of non splitmv
inter modes if the modeled rd cost based on pred error is within the
same factor of the best rd cost so far.
Also adds some enhancements in the rd search for splitmv mode to
speed things up by early breakouts. Negligible impact on performance.
Resuts on derfraw300:
psnr: -0.013% with the splitmv enhancements, -0.24% with the rd
breakout feature on.
speedup: 6% with splitmv enhancements, 20% with also residual breakout
(tested on football sequence at 600 Kbps)
Change-Id: I37abc308ea9f110c1679ce649b6a7e73ab1ad5fc
This commit enables 16x16 ADST/DCT forward hybrid transform using SSE2
operations. It reduces the runtime from 5433 cycles to 1621 cycles, at
no compression performance loss.
Change-Id: I75fd7f1984e9e28846af459f810ff0d6ae125230
Replace case statement with lookup.
Small speed gain at low speed settings but at speed 2+ where the
number of motion searches etc. falls the impact rises to ~3-4%.
Change-Id: Idff639b7b302ee65e042b7bf836943ac0a06fad8
Change-Id: I5940719a4a161f8c26ac9a6753f1678494cec644
- The vp9 mbfilter C code will branch on flat and mask. This CL
will perform both branches and combine the data. A later CL will
perform a check to see if all patch will take one branch.
- These functions are about 1.75 times faster than the C code on
Nexus 7.
PS #3
- Changed all functions to dub limit, blimit, and thresh from
vld {dx[]}, freeing up r4-r6.
- Changed code to use vbif to reduce one instruction and free
up a d register.
Change-Id: I028dae0e434dc9891c3677bdb182e201ffb04777
This probably has a mildly negative impact on performance, but will
(in future commits - or possibly merged with this one) allow SIMD
implementations of individual intra prediction functions. We may
perhaps want to consider having separate functions per txfm-size
also (i.e. 4x4, 8x8, 16x16 and 32x32 intra prediction functions for
each intra prediction mode), but I haven't played much with that
yet.
Change-Id: Ie739985eee0a3fcbb7aed29ee6910fdb653ea269
In the rare case were 4x4 interior filtering was called for but no
8x8 or larger filtering takes place, the previous code was skipping
the filtering. This patch fixes the issue by including the interior
mask in the overall mask for the filter application loops.
Change-Id: I4a0b65056c64f97478827c2ff41e0914fc7779d0
Encode time for first 50 frames of bus (speed 0) @ 1500kbps goes from
2min10.9 to 2min10.5, i.e. 0.3% faster overall, basically because we
prevent the call overhead.
Change-Id: I1eab1a95dd3eae282f9b866f1f0b3dcadff073d5
intermediate_height for horizontal filtering must be at least 8
pixels to be able to do vertical filtering correctly. Currently
it can be less for small block and y_step_q4 sizes.
Change-Id: I2ee28b0591b2041c2fa9844d0ae2ff8a1a59cc21
(1) Refines the modeling function and uses that to add some speed
features. Specifically, intead of using a flag use_largest_txfm as
a speed feature, an enum tx_size_search_method is used, of which
two of the types are USE_FULL_RD and USE_LARGESTALL. Two other
new types are added:
USE_LARGESTINTRA (use largest only for intra)
USE_LARGESTINTRA_MODELINTER (use largest for intra, and model for
inter)
(2) Another change is that the framework for deciding transform type
is simplified to use a heuristic count based method rather than
an rd based method using txfm_cache. In practice the new method
is found to work just as well - with derf only -0.01 down.
The new method is more compatible with the new framework where
certain rd costs are based on full rd and certain others are
based on modeled rd or are not computed. In this patch the existing
rd based method is still kept for use in the USE_FULL_RD mode.
In the other modes, the count based method is used.
However the recommendation is to remove it eventually since the
benefit is limited, and will remove a lot of complications in
the code
(3) Finally a bug is fixed with the existing use_largest_txfm speed feature
that causes mismatches when the lossless mode and 4x4 WH transform is
forced.
Results on derf:
USE_FULL_RD: +0.03% (due to change in the tables), 0% encode time reduction
USE_LARGESTINTRA: -0.21%, 15% encode time reduction (this one is a
pretty good compromise)
USE_LARGESTINTRA_MODELINTER: -0.98%, 22% encode time reduction
(currently the benefit of modeling is limited for txfm size selection,
but keeping this enum as a placeholder) .
USE_LARGESTALL: -1.05%, 27% encode-time reduction (same as existing
use_largest_txfm speed feature).
Change-Id: I4d60a5f9ce78fbc90cddf2f97ed91d8bc0d4f936
This should significantly speedup cost_coeffs(). Basically what the
patch does is to make the neighbour arrays padded by one item to
prevent an eob check in get_coef_context(), then it populates each
col/row scan and left/top edge coefficient with two times the same
neighbour - this prevents a single/double context branch in
get_coef_context(). Lastly, it populates neighbour arrays in pixel
order (rather than scan order), so we don't have to dereference the
scantable to get the correct neighbours.
Total encoding time of first 50 frames of bus (speed 0) at 1500kbps
goes from 2min10.1 to 2min5.3, i.e. a 2.6% overall speed increase.
Change-Id: I42bcd2210fd7bec03767ef0e2945a665b851df56
Encode time of bus (speed 0) 50 frames @ 1500kbps goes from 2min14.4 to
2min10.1, i.e. a 2.3% overall speed increase.
Change-Id: I3699580e74ec26c7d24e03681bc47ba25ee1ee87
Total encoding time for first 50 frames of bus (speed 0) @ 1500kbps
goes 2min34.8 to 2min14.4, i.e. a 10.4% overall speedup. The code is
x86-64 only, it needs some minor modifications to be 32bit compatible,
because it uses 15 xmm registers, whereas 32bit only has 8.
Change-Id: I2df53770c2e850813ffa713e1a91b45b0082b904
since:
92479d9 Make update_partition_context faster
fixes:
vp9/common/vp9_blockd.h:408:22: error:
non-constant-expression cannot be narrowed from type 'int' to 'char' in
initializer list [-Wc++11-narrowing]
char pcvalue[2] = {~(0xe << boffset), ~(0xf <<boffset)};
^~~~~~~~~~~~~~~~~
Change-Id: Id5b00b9a72d00a2b314081a23879bd1fa3ce983b
This commit enables SSE2 4x4 foward hybrid transform. The runtime
goes from 249 cycles down to 74 cycles. Overall around 2% speed-up
at no compression performance change.
Change-Id: Iad4d526346e05c7be896466c05500711bb763660
Makes cost_coeffs() a lot faster:
4x4: 236 -> 181 cycles
8x8: 888 -> 588 cycles
16x16: 3550 -> 2483 cycles
32x32: 17392 -> 12010 cycles
Total encode time of first 50 frames of bus (speed 0) @ 1500kbps goes
from 2min51.6 to 2min43.9, i.e. 4.7% overall speedup.
Change-Id: I16b8d595946393c8dc661599550b3f37f5718896
Adding CHECK_MEM_ERROR macro to vp9_common.h and removing two duplicated
ones from vp9_onyx_int.h and vp9_onyxd_int.h.
Change-Id: I916afec61b3019f18193135dac7c35ed0f89b8b6
This commit replaces zrun_zbin_boost, a method of biasing non-zero
coefficients following runs of zero-coefficients to be rounded towards
zero, with an explicit skip-block choice in the RD loop.
The logic is basically that if individual coefficients should be rounded
towards zero (from a RD point of view), the trellis/optimize loop should
take care of it. If whole blocks should be zero (from a RD point of
view), a single RD check is much more efficient than a complete
serialization of the quantization loop.
Quality change: derf +0.5% psnr, +1.6% ssim; yt +0.6% psnr, +1.1% ssim.
SIMD for quantize will follow in a separate patch. Results for other
test sets pending.
Change-Id: Ife5fa641163ac5150ac428011e87188f1937c1f4
Using vp9_set_pred_flag function instead of custom code, adding
decode_tokens function which is now called from decode_atom,
decode_sb_intra, and decode_sb.
Change-Id: Ie163a7106c0241099da9c5fe03069bd71f9d9ff8
- Added vp9_loop_filter_horizontal_edge_neon and
vp9_loop_filter_vertical_edge_neon.
- The functions are based off the vp8 loopfilter
functions.
- Matches x86 md5 checksum.
Change-Id: Id1c4dddb03584227e5ecd29f574a6ac27738fdd0
This commit enables configurable reference buffer pointer for intra
predictor. This allows later removal of spatial dependency between
blocks inside a 64x64 superblock in the rate-distortion optimization
loop.
Change-Id: I02418c2077efe19adc86e046a6b49364a980f5b1
Use vpx_memset for updating the partition contexts. Thanks to Noah
for pointing out the need of refactoring in this part.
Change-Id: I67fb78429d632298f1cd8a0be346cc76f79392a6
Makes first 50 frames of bus @ 1500kbps encode from 3min22.7 to 3min18.2,
i.e. 2.3% faster. In addition, use the sub_pixel_avg functions to calc
the variance of the averaging predictor. This is slightly suboptimal
because the function is subpixel-position-aware, but it will (at least
for the SSE2 version) not actually use a bilinear filter for a full-pixel
position, thus leading to approximately the same performance compared to
if we implemented an actual average-aware full-pixel variance function.
That gains another 0.3 seconds (i.e. encode time goes to 3min17.4), thus
leading to a total gain of 2.7%.
Change-Id: I3f059d2b04243921868cfed2568d4fa65d7b5acd
This commit makes use of the butterfly structure to enable the sse2
version implementation of 8x8 ADST/DCT hybrid transform coding.
The runtime of hybrid transform module goes down from 1170 cycles
to 245 cycles. Overall speed-up around 1.5%.
Change-Id: Ic808ffd21ece8a9d0410d8c0243d7b6c28ac3b3f
This reduced the size of the MODE_INFO array (mip and prev_mip)
by 425,568 bytes each for 1080p resolutions.
Change-Id: Ifa513ec2d0a49e8ec0867ec90620762fb7f1261d
For cases where there's no transform set in bit 0 (the left edge of
the SB) but bit 0 of mask_4x4_int is set (the edge 4 pixels from the
left edge needs filtering), it was incorrectly being skipped before.
This situation only happens on the leftmost edge of the image, as
the edge at column 0 is intentionally skipped since there aren't
pixels to the left to read.
Change-Id: Ib2fbbcb40166e90af31b1a0e13b85b68c226cbd3
Change vp9_block_error() to return a 64bit error variable, change all
callers to expect a 64bit return value (this will prevent overflows,
which we basically don't check for at all right now). Remove duplicate
block_error() function, which fixed that through truncation. Remove
old (incompatible) mmx/sse2 block_error SIMD versions and replace with
a new one that returns a 64bit value.
Encoding time of first 50 frames of bus @ 1500kbps goes from 3min29 to
3min23, i.e. a 3% overall speedup.
Change-Id: Ib71ac5508b5ee8a80f1753cd85d72df1629abe68
Encoding of bus @ 1500kbps (first 50 frames) goes from 3min57 to
3min35, i.e. approximately a 10.5% speedup. Note that the SIMD versions
which use a bilinear filter (x_offset & 7 || y_offset & 7) aren't
perfectly interleaved, and can probably be improved further in the
future. I've marked this with a few TODOs/FIXMEs in the code.
Change-Id: I5c9e900c0f0d32e431a50fecae213b510b2549f9
The new print out includes skips and has prefixed sections so you can
grep to find things like transforms chosen on each frame.
Change-Id: I195043424647d9514cfc3ff6720a5b20d010fa1b
This commit makes use of dual fdct32x32 versions for rate-distortion
optimization loop and encoding process, respectively. The one for
rd loop requires only 16 bits precision for intermediate steps.
The original fdct32x32 that allows higher intermediate precision (18
bits) was retained for the encoding process only.
This allows speed-up for fdct32x32 in the rd loop. No performance
loss observed.
Change-Id: I3237770e39a8f87ed17ae5513c87228533397cc3
This seems to only be used in the encoder. Also remove an empty wrapper
file that contained forward declarations for this function, but didn't
actually define any actual functions.
Change-Id: Ifc561eef7ebe374a7d03698055e51e105f6d614b
vp9_default_inter_mode_probs was being accessed with a different type
than it was defined with. Ensure that its declaration is included
prior to its definition.
Change-Id: I2f963f513ab2f4e339f8a3c17e3d0f03749eba16
All elements of this table are equal to 252, so replace it with a
single constant VP9_COEF_UPDATE_PROB.
Change-Id: I1e2d1d284326ce6df9899a740c2fc344b3ec81c9
The encoding time for bus at CIF goes from 661s to 625s. This commit
also enabled unit test of sad8x4/4x8 in sad_test.cc.
Change-Id: If3d10ebb56bda584bdb69bcf056599d580b12cb1
The encoding time for bus at CIF goes from 661s to 625s. This commit
also enabled unit test of sad8x4/4x8 in sad_test.cc.
Change-Id: If3d10ebb56bda584bdb69bcf056599d580b12cb1
Modified to work with 8x8 blocks of memory. Will revisit
later for further optimizations. For the HD clip used, the
decoder improved by almost 20%.
Change-Id: Iaa4785be293a32a42e8db07141bd699f504b8c67
Modified to work with 8x8 blocks of memory. Will revisit
later for further optimizations. For the HD clip used, the
decoder improved my 20%.
Change-Id: Ia0057f55d66d1445882351ea6c43b595a5a980e5
This commit fixed the allowable partition types for bottom-right
corner blocks.
When a block has over half of its pixels as valid content in both
vertical and horizontal directions, allow all the four partition
types in the bit-stream. Otherwise, apply partition type constraints.
Change-Id: I2252e2de7125a8bfb1c824bf34299a13c81102e3
* New probs for subpel filters/tx_count
* Makes a change to not reset to defaults for the tx_size
probs if an intermediate frame reverts to using a fixed tx_size.
* A few updates to the parameters for backward adaptation for mode/mv
* some cosmetic cleanups
derf300: +0.06%
Change-Id: I22994d659bc31ca7a4fc8820fde24001e64a2920
Remove the bilinear filter mode, and the no-loopfilter mode, and the
related vp9_setup_version() function.
Change-Id: I32311367812faf37863131df3af37d63d03973d7
This commit has no impact but to help us debug issues. To Use call like
this:
vp9_print_modes_and_motion_vectors(cpi->common.mi, cpi->common.mi_rows,
cpi->common.mi_cols,
cpi->common.current_video_frame,
"decode_mi.stt");
Change-Id: I89e27725dae351370eb7f311a20a145ed4f1d041
No bitstream change.
Removes unused filters and the code for the case of 2 switchable filters;
also changes the 8tap-smooth filter coefficients for integer shifts to be
interpolating to be consistent with the way it is implemented currently.
Change-Id: I96c542fd8c06f4e0df507a645976f58e6de92aae
Implements ability to signal and decode frames that are
encoded using only intra coding modes. Only the decode
side has been implemented here.
Change-Id: I53ac6a8d90422cd08ba389e5236e15b45f9e93de
Change the argument of get_uv_tx_size() to be an MBMI pointer, so that the
correct column's MBMI can be passed to the function.
Change-Id: Ied6b8ec33b77cdd353119e8fd2d157811815fc98
Fixed point scaling factors are calculated once for each
reference frame by using integer division. Otherwise fixed point
scaling routines are used in all scaling calculations. This makes it
possible to calculate fixed point scaling factors on device driver
software and pass them to hardware and thus avoid division on hardware.
TODO:
- Missing check for maximum frame dimensions
(currently scaling uses 14 bits)
- Missing check for maximum scaling ratio
(upscaling 16:1, downscaling 2:1)
Problems:
- Straightforward fixed point implementation can cause error +-1
compared to integer division (i.e. in x_step_q4). Should only
be an issue for frames larger than 16k.
Change-Id: I3cf4dabd610a4dc18da3bdb31ae244ebaf5d579c
Was always using sb_type of first column in a row of 8x8 units when
determining decoded block edges as a subcondition for loop filter
skipping.
Change-Id: Ib17554633a63a90b70cdaa7bed65db035a8ad9d8
Reduces TX_SIZE contexts to 2 for each kind. The code is
cleaner and there is hardly any performance difference with
more than two contexts.
Results: almost neutral
Change-Id: I17656bd6db76224ae2856adf882504560e7dbaa4
Made changes to the frame header to write the sync
code in the frame header for a non-displayable,
intra-only frame.
Extended reset_frame_context to 2-bits.
(Submitting on behalf of Dmitri)
Change-Id: Ie836ae0df9ed572fb4f08aabe9351a555c4f3b96
Adds coding of transform size within a frame by use of context
of transform sizes selected in left and above blocks.
Also incorporates code for generating stats.
TODO: generate and incorporate new default stats
Change-Id: I6a7af099f6ad61d448521d9a51167aedaf638ed6
Refactors mbskip coding to be compatible with coding of the rest of
the symbols. Adds forward/backward adaptation and removes a lot of
the legacy code.
Results:
fast50: +1.6%
derfraw300: +0.317%
Change-Id: I395a2976d15af044d3b8ded5acfa45f6f065f980
The partition types of blocks sitting on the frame boundary are
constrained by the block size and the position of each sub-block
relative to the frame. Hence we use truncated probability models
to handle the coding of such information.
100 frames run:
yt 0.138%
Change-Id: I85d9b45665c15280069c0234ea6f778af586d87d
This can only happen if partition is partly out-of-frame, in which
case the referenced mv is either out-of-frame also (and thus has the
same value as an already-read one), or it is actually uninitialized,
in which case we don't want to use it.
Change-Id: Icf39fa4d987c7abcbebb9bbdcdd6311e8fb9d3c9
With the removal of i4X4 and SPLIT_MV modes, the two entries for the
modes are no longer used. This patch remove the coding of the deltas.
Change-Id: Iea4eb500404ebe9706159380a03b8eca542fb4c3
Changes to the coding of transform sizes, along with forward
and backward probability updates.
Results:
derf300: +0.241%
Context based coding of transform sizes will be in a separate
patch.
Change-Id: I97241d60a926f014fee2de21fa4446ca56495756
Added condition to not to skip filtering of transform block edges when
the edge is also a decoding block edge.
Change-Id: Iaccb6206c4202b78e5dca3b89379556e0f4aba0c
Wrong max data size (skip has no data) and use of vp9_get_segdata()
when it should be vp9_segfeature_active().
Change-Id: I1eb97d33df6e2a42cc589049f704266fe3639902
ref_frame in MB_Mode_Info was changed in the ref frame coding patch
to be an array to handle first and second reference frame, this patch
fix the loop filter code that use the pointer directly as reference
frame.
Change-Id: I71afa5a49deb50c1bc38029fd07470b984c6dfe9
Code intra/inter, then comp/single, then the ref frame selection.
Use contextualization for all steps. Don't code two past frames
in comp pred mode.
Change-Id: I4639a78cd5cccb283023265dbcc07898c3e7cf95
Split partition probabilities between keyframes and non-keyframes,
since they are fairly different. Also have per-blocksize interframe
y intramode probabilities, since these vary heavily between different
blocksizes.
Lastly, replace default probabilities for partitioning and intra modes
with new ones generated from current codec. Replace counts with actual
probabilities also.
Change-Id: I77ca996e25e4a28e03bdbc542f27a3e64ca1234f
This version of the loop filter supports non-4:2:0 subsampling and
a fourth plane, as well as changing the filtering order to be more
friendly to hardware implementations.
The filters are applied first to all vertical edges within the
64x64 SB, followed by the top horizontal edge and any internal
horizontal edges. Since filtering is applied on each 4x4 edge
serially, a dependency is created from filtering one block edge
to the next. It would be possible to remove this depencnecy by
building all filtering decisions from the unfiltered
reconstruction data.
Change-Id: I08f3e9683eb7bded8a76651cbc50fc0dfdd05fa7
This avoids encoding tokens for blocks that are entirely
in the UMV border. This changes the bitstream.
Change-Id: I32b4df46ac8a990d0c37cee92fd34f8ddd4fb6c9
This commit makes the coding/reconstruction operations of intra
coding rate-distortion loop for UV components consistent with those
of the encoding process.
key frame coding gains:
derf: 0.11%
stdhd: 0.42%
Change-Id: I8d49f83924a320e3689ef2d60096c49d7f0c7a40
Adds backward adaptation and differential forward updates of switchable
interpolation filter probabilities. Also adds some cosmetic cleanups
and minor fixes on mv_ref probabilities.
derfraw300: +0.353% (with most coming from switchable interp changes)
Change-Id: Ie2718be73528c945fd0d80cfd63ca2d9cb3032de
Restrict get_matching_candidate() to considering
mvs at 8x8 and larger sizes for last frame case.
This is to reduce the HW load of using vectors down
to the 4x4 level from the previous frame.
Change-Id: I6505e610fd63a4e22d67f136aec7905a01b893ba
This speed 1 - uses variance threshold stolen from static-thresh
to determine split. Any superblock with greater than the variance
set by static thresh * quantizer index squared is split. In addition
transform size is set to largest size less than or equal to partition
size, sub pixel filter is set to normal, and only 12 modes are used
at all.
Change-Id: If7a2858ee70f96d1eb989c04fd87a332b147abef
We leave it in rdopt.c as a local define for now - this can be removed
later. In all other places, we remove it, thereby slightly decreasing
the size of some arrays in the bitstream.
Change-Id: Ic2a9beb97a4eda0b086f62c039d994b192f99ca5
It remains as a local define in rdopt.c so we can distinguish between
split and non-split modes in the RD loop, but disappears outside that
scope in the codec.
Change-Id: I98c18fe5ab7e4fbd1d6620ec5695e2ea20513ce9
The commit changed to use a new variant of Walsh-Hadamard Transform
by Tim Terriberry. This new variant has the best compression among a
number of variants that developed by Tim.
Change-Id: Icb3a88515463cfc644b17ca046fcd139db2557e9
The first 240 coeff positions (15 top-left blocks) are scanned in the
same order as in scatter scan, after that the coeffs are scanned in
"block bands", each band at a time, all coeffs in one band before
moving on to the next band. This brings down the amount of 4x4 coeff
blocks that need to be buffered while scanning, from 15 blocks to 8 blocks.
Change-Id: I478a991d63c48bd5e64d36e59fed7a00c9a651ba
This patch removes the implicit segmentation
experiment from the code base as the benefits
were still unproven as of the bitstream deadline.
Change-Id: I273b99d8d621d1853eac4182f97982cb5957247e
Added two flags to the frame header:
intra_only:
Signals that the frame is encoded using only INTRA
coding modes.
reset_frame_context:
Indicates that the coding context specified
in the frame header should be reset to default values before the
frame is encoded/decoded.
Change-Id: I182d46f1f84fb67a13c46ad767f246a38d7861a2
This patch changes the coefficient tree to move the EOB to below
the ZERO node in order to save number of bool decodes.
The advantages of moving EOB one step down as opposed to two steps down
in the other parallel patch are: 1. The coef modeling based on
the One-node becomes independent of the tree structure above it, and
2. Fewer conext/counter increases are needed.
The drawback is that the potential savings in bool decodes will be
less, but assuming that 0s are much more predominant than 1's the
potential savings is still likely to be substantial.
Results on derf300: -0.237%
Change-Id: Ie784be13dc98291306b338e8228703a4c2ea2242
This patch checks at the frame level to see if the previous
mode info context can be used. This patch eliminates the
flag check that was done for every mode and removes another
check that was done prior to every vp9_find_mv_refs().
Change-Id: I9da5e18b7e7e28f8b1f90d527cad087073df2d73
Proposal for tuning the residual coding by changing how the context
from previous tokens is calculated. Storing the energy class of previous
tokens instead of the token itself eases the critical path of
HW implementations.
Change-Id: I6d71d856b84518f6c88de771ddd818436f794bab
Adding API to read/write uncompressed frame header bits (it is not final
yet). Separate functions to read/write uncompressed header. Moving
clr_type, error_resilient_mode, refresh_frame_context,
frame_parallel_decoding_mode, frame_context_idx from compressed partition
to uncompressed frame header.
Change-Id: Id3ed8a387980c652ae147549412f4ec24a0a5bd0
Removed one 4x4 prediction step that was unnessary in the rd loop.
Removed a unused modecosts estimate from encoder side.
Change-Id: I65221a52719d6876492996955ef04142d2752d86
1. remove prediction mode conversion
2. unified bmode, same for key and non-key frame
3. set I4X4_PRED count for pdf to 0, as I4X4_PRED is no longer
coded ever. It is determined by ref_frame and block partition
Change-Id: If5b282957c24339b241acdb9f2afef85658fe47d
This commit removes the use of bmi_ in the first-pass encoding by
forcing encode_intra4x4block_ to use DC_PRED, followed by DCT_DCT
only, as John suggested. This makes the need for bmi buffer only
up to 4 entries, instead of 16.
Change-Id: I3410007dfae789ee46a09ae20c39d3ce3c7954aa
Also do per-partition motion vector referencing in <sb8x8 partitions,
and adjust mvref finding for sub8x8 partitions.
Change-Id: Id3ed1ed4d2a8910d11d327db6cc63b8eb79f941f
The changing in intra coding to base on transform block, i.e. pred->
txfm->quant->dequant-itxfm->recon, made all blocks within a prediction
unit behave consistently, there is no longer a need to handle blocks
differently based on the position within a predicitn block. So this
commit simplifies the decision of transform type to be based on
prediction mode only.
Change-Id: If96cb72386f2e9186126ace88afa35ef085b6c96
Move 4x4/4x8/8x4 partition coding out of experimental list.
This commit fixed the unit test failure issues. It also resolved
the merge conflicts between 4x4 block level partition and iterative
motion search for comp_inter_inter.
Change-Id: I898671f0631f5ddc4f5cc68d4c62ead7de9c5a58
Reverts to using 128 bit LUT for the coef models rather than 48
to ease hardware implementation.
Also incorporates some cleanups including removing various
hooks to support different lookup tables based on block_type and
ref_type.
Change-Id: I54100c120cca07a2ebd3a7776bc4630fa6a153f6
This commit changed the encoding and decoding of intra blocks to be
based on transform block. In each prediction block, the intra coding
iterates thorough each transform block based on raster scan order.
This commit also fixed a bug in D135 prediction code.
TODO next:
The RD mode/txfm_size selection should take this into account when
computing RD values.
Change-Id: I6d1be2faa4c4948a52e830b6a9a84a6b2b6850f6
This commit allows the rate-distortion optimization of intra coding
capable of supporting 8x4 and 4x8 partition settings.
It enables the entropy coding of intra modes in key frame using a
unified contextual probability model conditioned on its above/left
prediction modes.
Coding performance:
derf 0.464%
Change-Id: Ieed055084e11fcb64d5d5faeb0e706d30268ba18
The API is not final yet and can be changed. Actual layout of
uncompressed frame part will be finalized later. Right now moving
clr_type, error_resilient_mode, refresh_frame_context,
frame_parallel_decoding_mode from first compressed partition to
uncompressed frame part.
Change-Id: I3afc5d4ea92c5a114f4c3d88f96858cccc15b76e
Uses more aggrerssive interpolation to reduce storage for the
model tables by almost more than half. Only 48 lists of probs are
stored (as opposed to 128 before), corresponding to ONE_NODE
probabilities of:
1,
3, 7, 11, ..., 115, 119,
127, 135, ..., 247, 255.
Besides, only 1 table is used as opposed to 2 before. So the overall
memory needed for the tables is just 48 * 8 = 384 bytes.
The table currently used is based on a new Pareto distribution with
heavier tail than a generalized Gaussian - which improves results on
derf by about 0.1% over a single table Generaized Gaussian.
Results overall on derfraw300 is -0.14%.
Change-Id: I19bd03559cbf5894a9f8594b8023dcc3e546f6bd
Cleans up the experiment. Actually uses reduced counts for backward
updates, and reduced number of probabilities in the context.
No change in bitstream when the experiment is on.
Between expt on and off:
derfraw300 is down only -0.062% (which is better than when expts
were run previously).
Change-Id: I55285a049a0c22810bdb42914212ab5a4f8521b5
