Change band calculation back to simpler model based
on the order in which coefficients are coded in scan order
not the absolute coefficient positions.
With the scatter scan experiment enabled the results were
appear broadly neutral on derf (-0.028) but up a little on std-hd +0.134).
Without the scatterscan experiment on the results were up derf as well.
Change-Id: Ie9ef03ce42a6b24b849a4bebe950d4a5dffa6791
Move set_partition_seg_context_ to common file. Use consistent
context setup conditions for partition probability model update at
encoder and decoder.
Change-Id: I24b7ed3b1c48e3d2568191a46b70136b99b67b1a
Use 4x4 block coding for UV components arbitrarily in I4X4_PRED and
SPLITMV coding modes. This is a temporary solution to enable
bit-stream support for recursive partition down to 4x4 block size.
Will separate the functionalities of 4x4 block coding rate-distortion
out from those of superblocks.
Change-Id: I03dc15d5897014f175f3f2c91e9b266091d56797
In current code, motion vectors got from single prediction mode are used
in compound prediction mode directly. These motion vectors may not give
accurate prediction since they are searched independently. In this patch,
we took Pascal's suggestion, and did joint motion search in compound
prediction mode to find better motion vectors in this situation.
Test results:
Overall PSNR: 0.570%(derf), 0.918%(stdhd);
SSIM: 0.572%(derf), 1.009%(stdhd);
The encoder is a little slower. This can be improved since some c
code is used in motion search.
Change-Id: Ib30c9240f6c56c9b070867b4ca89412a76d9f3c6
This commit enables the search for the optimal superblock
partition types in the recursion form. The intention is to
make the optimization process more concise and ready to
support partition down to 4x4 block size next.
Change-Id: Iae279a67df3a7cc372553c84c775bc4d2f3e4336
The previous code was somewhat vestigial for 16x16 MI units, but was
incorrect when called with chroma blocks larger than 4x4 because the
block index caused a reference to a non-existent BMI. This patch uses
the same MV for all chroma subblocks in SPLITMV mode, which is
suboptimal for non-4:2:0 subsamplings, but as SPLITMV may be removed
in the near future, will use this as a stop gap.
Change-Id: I3211cee5ccf1cfb426e5eef5353b0ce5bb92b4cd
Make framebuffer allocations according to the chroma subsamping
factors in use. A bit is placed in the raw part of the frame header for
each of the two subsampling factors. This will be moved in a future
commit to make them part of the TBD feature set bits, probably only set
on keyframes, etc.
Change-Id: I59ed38d3a3c0d4af3c7c277617de28d04a001853
The chroma planes are not used during the first pass encode,
but the vp9_encode_sb() function was operating on them anyway.
This was causing the use of uninitialized memory.
Change-Id: I5ebafcd3d5e34ed91a8336dad159b573995a939f
Update and buffer left/above partition information context per 8x8
block. This allows to further enable recursive partition down to
4x4 block size, and hence deprecating I4X4_PRED and SPLITMV.
This commit also fixes a context buffer swap/restore issue in 32x32
partition type search. This gives 0.1% performance gain for derf/yt.
Will refactor the superblock partition type search into recursion
form.
Change-Id: Ib61975aca5f12b78d8018481d7fa1393d085689b
Makes the temporary storage of the filtered data agnostic to
the number of planes and how they're subsampled.
Change-Id: I12f352cd69a47ebe1ac622af30db29b49becb7f4
Skip Q values between the q.0 mode and a real q of
2.0 as these are not valuable from an RD perspective.
Change-Id: I110c4858c57f97315953f4d88a2596d4764360df
There is only one instance of these structures, no need for them
to be allocated separately on the heap.
Change-Id: I1333cc92d06bbe21be643c2b2f0e3936f0264cac
This setup is now handled by vp9_build_intra_predictors()
when left_available and/or up_available is zero.
Change-Id: I59cec0ab95f8be69ce885fd20727510e4deef8a0
Iterating over all planes in the loop instead of custom y,uv code inside
handle_inter_mode function.
Change-Id: I301f9276d6d544c2fd7203d84f1318ac80ea625d
Disable the use of scaled reference frame for motion search in
SPLITMV mode. This fixes the unit test failure issue triggered
when merging sb8x8 from experimental list.
Change-Id: I02ac25fd8db8d5762f8fee29513b947189875fa0
This allows removing a large number of transform size specific functions,
as well as supporting 444/alpha by routing all code through the
subsampling-aware path.
Change-Id: Ieb085cebe9f37f24fc24de179898b22abfda08a4
The number of reference buffers is extended to 8 and
a reference sign-bias added for the LAST_FRAME.
Whilst the number of reference buffers used by an
individual frame remains unchanged at 3, these may
now be selected from 8 possible buffers.
Change-Id: I2d247b9c1c2b3a339d6c9fac125e81ba373f75a7
With this, encoder/decoder appear to match with sb8x8 experiment.
Needs some larger-scale testing.
Change-Id: I44d3cac37b3c98264985ed0a0fc763c30089aa64
Creates a common encode (subtract, transform, quantize, optimize,
inverse transform, reconstruct) function for all sb sizes, including
the old 16x16 path.
Change-Id: I964dff1ea7a0a5c378046a069ad83495f54df007
Don't allow i4x4 except for sb8x8 recursion step. Read only 4 (not 16)
i4x4 submodes if we are i4x4.
Change-Id: Iaaaced1a134006b2c96eed66f014300eae41e0ed
If a reference frame is inter, the only valid modes would
be inter modes. This check is unnecessary.
Change-Id: Ib8433ab5a3418f94149ee4e3062d48d7740d225a
This doesn't affect the output, because in previous cases where the
values were uninitialized, this was because the mb_row/col is outside
the codable area, and thus encode_sb will test them for the next
decomposition-level, but return right after that on size-check. All
this does is prevent a warning in valgrind.
Change-Id: I90d8a29e6f8ebb2b0143684e08fe77ae3a0816b1
The decode_mb only carries I8X8_PRED decoding, which will be covered
by the regular MB intra modes when SB8X8 is on. To be removed later.
Change-Id: I3b9ee55917a30b42518b81987bc10c22b1a19e7f
Work-in-progress, not yet ready for review. TODO items:
- bitstream writing (encoder) and reading (decoder)
- decoder reconstruction
Change-Id: I5afb7284e7e0480847b47cd0097cb469433c9081
Changing the order of probabilities inside mb_segment_tree_probs in order
to use treed_read/treed_write function instead of custom code.
Change-Id: I843487d5057913b9358db73da270893eefecc6c8
Moving common code from encoder and decoder to vp9_get_qindex function.
Also moving quant-related constants from vp9_onyxc_int.h to
vp9_quant_common.h.
Change-Id: I70c5bfbaa1c8bf00fde0bfc459d077f88b6d46c8
Separate the decoding process of 4x4 block based coding (both intra
and inter) from decode_mb and move it into decode_atom_. This allows
to further move the rest per 16x16 block decoding of decode_mb into
decode_sb, and hence eventually deprecating decode_mb when SB8X8 is
enabled.
Change-Id: I678cb8007d8a57b792d7a23020edb0c74fbf4237
Separate the functionality of I4X4_PRED from decode_mb. Use
decode_atom_intra instead, to enable recursive partition of superblock
down to 8x8.
Change-Id: Ifc89a3be82225398954169d0a839abdbbfd8ca3b
Also fixed two minor subtle boundary conditions in intra prediction
code, and replaced memcpy/memset with vpx_ prefixed version.
Change-Id: I9cddff3be831228b628f1f2f065a61feacbcbee6
The commmit changed to use same intra prediction function for all
block sizes.
Some details on the changes:
1. All directional modes except DC/TM/V/H now have built-in filtering
for all pixels with filter taps either (1, 2, 1)/4 or (1, 1)/2.
2. Above edge get automatic extended to double width (bw*2), which
makes a lot of the prediciton mode computation simpler.
3. Same intra prediction function is called with different size
for i4x4_pred and all other larger size.
Overall, the change helped keyframe only coding for both cif size
and std-hd size test sets by .5% consistently on all encodings.
For normal coding with single/auto key frame, the change now also
is consistently net positive for all encodings. The overall gains
is about .15% on std-hd set.
Change-Id: I01ceb31fbc73d49776262e6bdc06853b03bbd1d1
Updates the tokenizer to use the common block walker used by the
detokenizer, to support non-4:2:0 and more than 3 planes.
Change-Id: If1854117a9c7c1427349209fa2b3051ce6459dcb
This doesn't change output, because the argument isn't actually used
ATM. However, we should fix it for consistency.
Change-Id: I7b7326a8e92c0d411c999ec2c781204b516ed53d
Unify the tokenize_ function and enable configurable block size for
superblock 8x8. We are immigrating the functionalities of
macroblock handles into superblock ones, and eventually will remove
encode_mb and decode_mb. To be continued on detokenize_ module.
Change-Id: I9f81e8c2291082535cf5e0c4b662eb24fb7c8a7f
Output changes slightly because of a minor bug in (at least) the sb32x16
block2above tx16x16 tables that previously existed in vp9_blockd.c.
Change-Id: I624af28ac200a8322d64454cf05c79e9502968cc
Turns model based reverse updates on for coefficients in an
effort to reduce the memory requirement for counters.
With this patch the counters needed will be reduced by about
75% since only 3 counts are needed instead of 12.
The impact in performance is:
derf300: -0.252%
stdhd250: -0.046%
However retraining should alleviate some of the drop in
performance.
Change-Id: I6f2b3e13f6d5520aa3400b0b228fb5e8b4a43caa
First patch to make sb decoding based on the transform size. This patch
is working for the sb modes, combining the parts of decode_mb that fit
into this framework will come as a second patch.
Change-Id: I26123416a7a87e096bbdb5eb944ce5bb198384f8
Conflicts:
vp9/common/vp9_findnearmv.c
vp9/common/vp9_rtcd_defs.sh
vp9/decoder/vp9_decodframe.c
vp9/decoder/x86/vp9_dequantize_sse2.c
vp9/encoder/vp9_rdopt.c
vp9/vp9_common.mk
Resolve file name changes in favor of master. Resolve rdopt changes in
favor of experimental, preserving the newer experiments.
Change-Id: If51ed8f457470281c7b20a5c1a2f4ce2cf76c20f
All members can be referenced from their per-plane counterparts, and
removes assumptions about 24 blocks per macroblock.
Change-Id: I7ff2fa72d22c29163eb558981c8193765a8113d9
The previous commit 15255ee "Move dequant from BLOCKD to per-plane MACROBLOCKD"
removed the vp9_asm_enc_offsets.c file, but didn't update the various secondary
build systems that special case these files. Restore it for now, to ensure any
in-progress changes and builds continue working, to allow time to more carefully
coordinate removal of these files.
Change-Id: I24b78db3fb874d5fbd226548b7366a05ed98e536
This originally was "Removed update_blockd_bmi()". Now,
this patch removed bmi from blockd and uses the bmi found
in mode_info_context. Eliminates unnecessary bmi copies between
blockd and mode_info_context.
Change-Id: I287a4972974bb363f49e528daa9b2a2293f4bc76
vp9_dequantize_x86 has only sse2 functions.
vp9_dct_sse2_intrinsics has no namespace collision and can drop
_intrinsics.
vp9_idct_mmx.h is unused.
Change-Id: Ic16e31fb372a1d1e841a62ecb4189fe8f95808ec
Basic assumption: when talking about transform units, use b_; when
talking about macroblock indices, use mb_.
Change-Id: Ifd163f595d4924ff892de4eb0401ccd56dc81884
The quantizer can vary per-plane, and the dequantization vector is
available in the per-plane part of MACROBLOCKD. The previous code would
incorrectly use the Y quantizer for the whole macroblock.
Change-Id: I3ab418aef9168ea0ddcfa4b7c0be32ae48b536d7
The underlying storage for these buffers is in the per-plane MACROBLOCKD
area, so read it from there directly.
Change-Id: Id6bd835117fdd9dea07db95ad06eff9f12afaaf7
All members can be referenced from their per-plane counterparts, and
removes assumptions about 24 blocks per macroblock.
Change-Id: I593fb0715e74cd84b48facd1c9b18c3ae1185d4b
Remove similarly named header file. It is obsolete.
Move file to match naming style.
Adjust make file to include the file correctly and remove extra
unnecessary #if guard.
Change-Id: Ifba07ba9938a5df08a9f4eda54a3ac4d6983f7bf
Using ALLOWED_REFS_PER_FRAME constants instead of hard coded 3, replacing
memcpy with plain struct assignment.
Change-Id: Ibc86f5d175fcb3f3a3eddacf593525370f1f854c
Function set_mb_row() and set_mb_col() do similar work and are always
called together, this commit merged them into a single function for
clarity and easy maintainence. This was a TODO item.
Change-Id: I956bd9ed6afb8b2b0469b20fd8bc893b26f8a0f3
This commit enables selecting probability models for recursive block
partition information syntax, depending on its above/left partition
information, as well as the current block size. These conditional
probability models are reasonably stationary and consistent across
frames, hence the backward adaptive approach is used to maintain and
update the contextual models.
It achieves coding performance gains (on top of enabling rectangular
block sizes):
derf: 0.242%
yt: 0.391%
hd: 0.376%
stdhd: 0.645%
Change-Id: Ie513d9673337f0d27abd65fb566b711d0844ec2e
This minor tweak makes segment 0 neutral and used by
key frames and also extends beyond 4 segments.
Change-Id: Ife4744602aba66ac9432746db3113cc5cd88a482
Also some further simplification following removal
of top node code.
There is an issue in regards to the shared file vp8cx.h
in regard to the roi_map as this interface assumes that
there are only 4 segments. I have left the value here as
4 for now meaning that the roi_map interface is broken
for VP9.
Note that this change would have been easier if I hadn't
had to search for hard wire instances of the number 4
and <= 3.
Change-Id: Ia8b6deea4be4dbd20deb1656e689dd43a5f190e8
Remove top node optimization.
The improvement this gives is not sufficient to justify
the extra complexity.
Change-Id: I2bb4a12a50ffd52cacfa4a3e8acbb2e522066905
Quantizers can vary per plane, but not per block. Move these values to
the per-plane part of MACROBLOCK.
Change-Id: I320a55e38b7b28b29aec751a4aca5ccd0c9b9326
This commit moves the coeff storage from the MACROBLOCK struct to its
per-plane part. The next commit will remove the coeff member from the
BLOCK structure so that it is consistently accessed per-plane.
Also refactors vp9_sb_block_error_c and vp9_sb_uv_block_error_c to be
variable subsampling aware.
Change-Id: I18c30f87f27c3a012119b6c1970d5fa499804455
This commit enables rectangular block prediction of compound
inter-intra mode. It combines the mb/sb32/sb64 prediction functions
into a unified version with configurable block width and height.
This fixes the enc/dec mismatch of the codebase when
comp-interintra-pred is enabled.
Change-Id: I1d0db2f1f184007802df04fcd12b9dadb3189ff0
Clean Windows build warnings:
warning C4028: formal parameter <N> different from declaration
This was fixed independently in master and experimental but the fixes
were in opposite directions. One added const to the declaration and the
other removed it from the implementation.
Also update the variable names. This doesn't modify the data so call it
ref, matching the functions in the vicinity, rather than dst.
Change-Id: I2ffc6b4a874cb98c26487b909d20a5e099b5582c
Fix warning on windows: signed/unsigned mismatch on lines 415, 454
Comparison was between size_t data_sz >= int index_sz on 415 and
unsigned int data_sz >= int index_sz on 454. Both might be changed to
size_t but that would be tracing and replacing all comparisons is
outside the scope of this change.
In the rest of these two functions ensure unsigned values are used
consistently.
Change-Id: I922b399ceca612a92f44b9d1d331c1c6bae9d768
Also use explicitely named enum values in sb_type comparisons, rather
than relying on absolute integer values, because enum values may
change in the future.
Change-Id: I72d42971a98157af93413a25ac2c7e6f9b369cec
First in a series of commits making certain MACROBLOCK members
addressable per-plane. This commit also refactors the block subtraction
functions vp9_subtract_b, vp9_subtract_sby_c, etc to be
loops-over-planes and variable subsampling aware.
Change-Id: I371d092b914ae0a495dfd852ea1a3d2467be6ec3
This version of speed 1 only disables modes at higher resolution that
had distortions >2x the best mode we found...
The hope is that this could be a replacement for speed 0 ...
Change-Id: I7421f1016b8958314469da84c4dccddf25390720
Mostly for cleanup purposes. Now we should be able to rework
the encoder/decoder to use a common idct/add function.
Change-Id: I1597cc59812f362ecec0a3493b6101a6cc6fa7ff
This fixes an intermittent mismatch issue cause by moving
the lossless mode decoding bit to after the loop filter
setup information. We need to ensure that the lossless bit
is decoded prior to loop filter setup.
Change-Id: I3faa3fff8e1013b7405dac91268350e059ed121e
Adds an experiment that codes an end-of-orientation symbol
for every eligible zero encountered in scan order.
This cleans out various other sub-experiments that were part
of the origiinal patch, which will be later included if found
useful.
Results are slightly positive on all sets (0.1 - 0.2% range).
Change-Id: I57765c605fefc7fb9d1b57f1b356843602abefaf
Removes the redundant dst pointers from vp9_build_inter_predictors_sb{y,uv}
and the remaining mb specific functions.
Change-Id: I7b6bf439d9394b85ea79b4fe61a3ffc1025720da
Wherever there are real pixels available before falling back to use
assumed values 127 and 129.
This also make DC_PRED for i4x4 consistent with DC_PRED for larger
blocks.
Change-Id: I54372924826118da023f402c802ac6ce0caa70c3
First in a series of commits moving the framebuffers pointers to
per-plane data, so that they can be indexed numerically rather than
by name.
Change-Id: I6e0d60fd4d51e6375c384eb7321776564df21775
For 1080 material, this buffer is currently 2,270,928 bytes. This patch swaps
ptrs instead of copying and uses the last show_frame flag instead of setting
the entire buffer to zero. For the test clip used, the decoder improved by up
to 1%.
Change-Id: I686825712ad56043e09ada9808dc489f875a6ce0
Remove the unnecessary _s_ from their names, and add a new
vp9_recon_sb() that calls the y and uv variants.
Change-Id: I7ffaa5ff5605a8472cac2a53de8cf889353039a6
Similar to the prior change that removed the rounding from non-SPLITMV
modes. Improves quality by a similar amount (Additional +0.087% on derf)
Change-Id: I39d80b4a3037a3aa7e285eb2320346ddaf646f52
Further simplification of mvref search to return
only the top two candidates. Distance weights removed
as the test order reflects distance anyway.
Change-Id: I0518cab7280258fec2058670add4f853fab7b855
As we are no longer able to sort the candidate
mvrefs in both encoder and decode and given
that the cost of explicit signalling has proved
prohibitive, it no longer makes sense to find more
than 2 candidates.
This patch:
Modifies and simplifies add_candidate_mv()
Removes the forced addition of a 0 vector in the
MAX_MV_REF_CANDIDATES-1 position (in preparation
to reducing MAX_MV_REF_CANDIDATES to 2).
Re-orders the addition of candidates slightly.
This actually gives small gains (circa 0.2% on std-hd)
A subsequent patch will remove NEW_MVREF experiment,
reduce MAX_MV_REF_CANDIDATES to 2 and remove distance
weights as these are implicit now in the order.
Change-Id: I3dbe1a6f8a1a18b3c108257069c22a1141a207a4
Adjustments take heavier account of the frame near a kf
in deciding boost and limit the total number that can contribute.
Also adjusted the minq calculations such that in most cases we
generate a smaller key frame.
Modified the code that accounts for how static the sequence is and
added some adjustment based on image size. This is still very
crude but smaller images tend to behave better with a larger
delta between KF Q and other frames than larger image formats.
Changes give sizable gains in overall PSNR on all the test sets but the
biggest gains (~3%) were on the std-hd set.
The gains were smaller for SSIM but still significant.
Average PSNR results are mixed because this metric can very easily
be altered by having a very good / lossless coding of one or two frames.
Some of the YT and YT-HD clips in particular have blank lead ins and
allowing lossless coding of these appears to make a big difference to
average PSNR but it reality does not help much at all.
Change-Id: I6bfe485a1d330b47c783832f1717c95c535464ec
Consider the previous behavior for the MV 1 3/8 (11/8 pel). In the
existing code, the fractional part of the MV is considered separately,
and rounded is applied, giving a result of 6/8. Rounding is not required
in this case, as we're increasing the precision from a q3 to a q4, and
the correct value 11/16 can be represented exactly.
Slight gain observed (+.033 average on derf)
Change-Id: I320e160e8b12f1dd66aa0ce7966b5088870fe9f8
This commit converts the luma versions of vp9_build_inter_predictors_sb
to use a common function. Update the convolution functions to support
block sizes larger than 16x16, and add a foreach_predicted_block walker.
Next step will be to calculate the UV motion vector and implement SBUV,
then fold in vp9_build_inter16x16_predictors_mb and SPLITMV.
At the 16x16, 32x32, and 64x64 levels implemented in this commit, each
plane is predicted with only a single call to vp9_build_inter_predictor.
This is not yet called for SPLITMV. If the notion of SPLITMV/I8X8/I4X4
goes away, then the prediction block walker can go away, since we'll
always predict the whole bsize in a single step. Implemented using a
block walker at this stage for SPLITMV, as a 4x4 "prediction block size"
within the BLOCK_SIZE_MB16X16 macroblock. It would also support other
rectangular sizes too, if the blocks smaller than 16x16 remain
implemented as a SPLITMV-like thing. Just using 4x4 for now.
There's also a potential to combine with the foreach_transformed_block
walker if the logic for calculating the size of the subsampled
transform is made more straightforward, perhaps as a consequence of
supporing smaller macroblocks than 16x16. Will watch what happens there.
Change-Id: Iddd9973398542216601b630c628b9b7fdee33fe2
Use in-place buffers (dst of MACROBLOCKD) for macroblock prediction.
This makes the macroblock buffer handling consistent with those of
superblock. Remove predictor buffer MACROBLOCKD.
Change-Id: Id1bcd898961097b1e6230c10f0130753a59fc6df
Updates the common convoloution code to support blocks larger than
16x16, and rectangular blocks. This uncovered a bug in the SSSE3
filtering routines due to the order of application of saturation.
This commit fixes that bug, adjusts the unit test to bias its
random values towards the extremes, and adds a test to ensure that
all filters conform to the expected pairwise addition structure.
Change-Id: I81f69668b1de0de5a8ed43f0643845641525c8f0
Moving all the probability updates after frame context selection.
This makes it clean and simple to store all the probs in single
struct that can be sent to hardware codec.
Change-Id: I2ec3de81adbd468d8ef34a914caae80a18c3ef56
List of moved functions: vp9_decode_uniform, vp9_decode_term_subexp,
vo9_inv_recenter_nonneg, vp9_decode_unsigned_max.
Change-Id: Ib518beb90b791690c5c93de17b8bdbf560033b41
Adds RD integration for 32x16, 16x32, 64x32 and 32x64 rectangular blocks.
Derf almost +0.6%, HD a little over +1.0%, STDHD +1.3%.
Change-Id: Id651fdb6a655fdbb5c47009757e63317acfb88a5
Enable recursive partition information coding from SB64X64 down to
MB16X16. The bit-stream syntax is now supporting rectangular block
sizes. It starts from SB64X64 and recursively describes the partition
type of the current block. If the partition type is PARTITION_NONE,
the block is coded as a single unit; if it is PARTITION_HORZ or
PARTITION_VERT, the block is segmented into two independently coded
rectangular units, with no further partition needed; otherwise, the
block is segmented into 4 square blocks. i.e., PARTITION_SPLIT case,
each can be potentially further partitioned.
Forward adaptive probability modeling is used for the partition
information coding, conditioned on the current block size.
Change-Id: I499365fb547839d555498e3bcc0387d8a3587d87
This function is now called from configures the ARNR
filter so it belongs with the other temporal filter
functions.
Change-Id: I64211875918364b5b8edfb97743e573c6def1663
Normalization of the frame boost value was being done
when it reached the value 1028. The intention was to
keep to a range of 10 bits, so it should have been
clipped above 1023.
Change-Id: I0afdddc1d2eb9e7822ec4578903cbe6ec0b33b91
This flag was added to VP8 to allow a mode where MB-level skipping
was not allowed, saving a bit per mb. It was never used in practice,
and hasn't been tested in VP9, so remove it.
Change-Id: Id450ec6904c6d06c1919508e7efc52d05cde5631
tx_type == DCT_DCT check is an implementation detail of iht_add. Also
adding dequant_add_y function with explicit DCT_DCT check inside.
Change-Id: Ia3cb0225601752cdef0ff6f0acd3a09d9dbd8938
In decoder, the scaling calculation, such as (mv * x_num / x_den),
is fairly time-consuming. In this patch, we check if the scaling
happens or not at frame level, and then decide which function to
call to skip scaling calculation when no scaling is needed. Tests
showed a 3% decoder performance gain.
Change-Id: I270901dd0331048e50368cfd51ce273dd82b8733
This is the first CL with vp9_reader changes. All another macro
definitions will be replaced after.
Change-Id: I1c6bd9c9a612ec1663d484d6adb4fb720af54063
Static threshold results slightly up (+0.1% on derf), probably b/c
we now take the filter (sharp/lowpass) into account for the breakout
decision.
Change-Id: I9f597601da434205142afd05f32690e7ba8fd690
This is work-in-progress, it implements multiple ARF
encoding behind an experimental flag.
It adds the ability to insert multiple ARF frames into a
single ARF group. This patch implements the reordering
of the coded frames, and implements a fixed-length coding
pattern. It applies a fixed quantizer strategy based on
where the frame is in the coding sequence.
Further work to modify the rate control strategy is
ongoing and will be submitted via a set of future patches.
In this first step, each ARF group is recursively
bisected and an ARF frame added at that position in the
sequence. The recursion continues until ARF frames are
within MIN_GF_INTERVAL frames.
The code sits behind the "multiple-arf" experimental
flag ("CONFIG_MULTIPLE_ARF"). The experimental flag
"oneshotq" ("CONFIG_ONESHOTQ") also needs to be enabled
for this patch to work correctly.
Change-Id: Ie473b05ebb43ac473c0cfb659b2b8042823085e2
Combine superblock inter predictors into a unified function that
allows configurable block width and height. The inter predictions
of block sizes smaller than 16x16 are handled differently. To be
continued on merging them later.
Change-Id: I14075959dd5e221f00c205c99ca35c1c31ef728e
To match the order of directional intra prediction modes for larger
blocks, also renamed the i4x4 prediction modes to mirror the larger
variants.
Change-Id: I77cea4d0add6c7758460bf9c7a2fe59aca601f0b
The probabilities derived from these statistics are used in bitstream
writing; therefore, we should only do this when we actually decide to
use macroblock coding (over superblock coding). Derf gains +0.15%.
Change-Id: I196814c070a7c79889590658ce10a6eb07454389
The intra predictor supports configurable block sizes. It can handle
intra prediction down to 4x4 sizes, when enabled in BLOCK_SIZE_TYPE.
Change-Id: I7399ec2512393aa98aadda9813ca0c83e19af854
Rename pick_mb_modes to pick_mb_mode, since it now handles only a
single macroblock. This is consistent with pick_sb_mode handling a
single non-macroblock.
Change-Id: I896fdfa06436b2d8c24d6474718cc74420df6b3b
This patch changes the default with the modecoefprob expt
to use mode-based forward updates with one-node pegged
modeling.
The maximum difference with fully trained tables is now
less that 0.1%.
Change-Id: I06b44322e10c6703f93f3c1d48d973b1136a0618
This patch will use the dest buffer instead of the
predictor buffer. This will allow us in future commits
to remove the extra mem copy that occurs in the dequant
functions when eob == 0. We should also be able to remove
extra params that are passed into the dequant functions.
Change-Id: I7241bc1ab797a430418b1f3a95b5476db7455f6a
More specifically, remove vp9_quantize_mb*, vp9_optimize_mb*,
vp9_inverse_transform_mb* and vp9_transform_mb*. Instead, use the
generic _sb* functions that take a size argument, and call them with
BLOCK_SIZE_MB16X16.
Change-Id: I33024afea95d3a23ffbc1df7da426e4645110f29
With these fixed, the codec produces identical results regardless of
what literal values are used for the enum members in BLOCK_SIZE_*.
Change-Id: I26db8e08019b58ba432af1f0950ebe6b0eb4ad8c
Merge various super_block_yrd and super_block_uvrd versions into one
common function that works for all sizes. Make transform size selection
size-agnostic also. This fixes a slight bug in the intra UV superblock
code where it used the wrong transform size for txsz > 8x8, and stores
the txsz selection for superblocks properly (instead of forgetting it).
Lastly, it removes the trellis search that was done for 16x16 intra
predictors, since trellis is relatively expensive and should thus only
be done after RD mode selection.
Gives basically identical results on derf (+0.009%).
Change-Id: If4485c6f0a0fe4038b3172f7a238477c35a6f8d3
The unified dequantization, inverse transform, and adding functions
support rectangular block sizes. Also separate the operations on
luma and chroma components, in the consideration of the txfm_size
for uv components in rectangular block sizes.
Change-Id: I2a13246b2a9086b37d575d346070990d854cc110
The strategy to run fast loop filter picking for encoder speed-up
should be revisited at a later stage.
Change-Id: I3b75e06d767cff41be952a42e63b3292f4eab996
Merge sb32x32 and sb64x64 functions; allow for rectangular sizes. Code
gives identical encoder results before and after. There are a few
macros for rectangular block sizes under the sbsegment experiment; this
experiment is not yet functional and should not yet be used.
Change-Id: I71f93b5d2a1596e99a6f01f29c3f0a456694d728
Restructure the code to avoid the majority of per-block-size
switches, code duplication, etc. All block types (mb/sb32/sb64)
can be handled by the same code.
Change-Id: I4022718d66e31a15a7074e43f3b98cd0a5124ea7
Removing several commented code blocks, using uint32_t and uint8_t types,
removing redundant code.
Change-Id: Ifc5cc9863897925ea2a7cab4f7309ccf28d80bfe
Clamp only the motion vectors inferred from neighboring reference
macroblocks. The motion vectors obtained through motion search in
NEWMV mode are constrained during the search process, which allows
a relatively larger referencing region than the inferred mvs.
Hence further clamping the best mv provided by the motion search may
affect the efficacy of NEWMV mode.
Synchronized the decoding process. The decoded mvs in NEWMV modes
should be guaranteed to fit in the effective range. Put a mv range
clamping function there for security purpose.
This improves the coding performance of high motion sequences, e.g.,
derf set:
foreman 0.233%
husky 0.175%
icd 0.135%
mother_daughter 0.337%
pamphlet 0.561%
stdhd set:
blue_sky 0.408%
city 0.455%
also saw sunflower goes down by -0.469%.
Change-Id: I3fcbba669e56dab779857a8126a91b926e899cb5
Start grouping data per-plane, as part of refactoring to support
additional planes, and chroma planes with other-than 4:2:0
subsampling.
Change-Id: Idb76a0e23ab239180c818025bae1f36f1608bb23
Inside decode_sb_4x4 it should be
"get_tx_type_4x4(mb, y_idx * y_size + x_idx)"
but it was
"get_tx_type_4x4(mb, y_idx * (2 * y_size) + x_idx)".
Also making code of decode_sb_4x4, decode_sb_8x8, and decode_sb_16x16
formatted in the same way.
Change-Id: I15c7bef4fb575f7e9da19f953912324cb35d24dd
This function expects real Q values as inputs
not index values.
The use-age her impacts the Q chosen for force key
frames. Though this is a bug fix I have not yet verified
whether following the bug fix the q multiplier value used is
correct.
Change-Id: I49f6da894d90baeb1e86c820c335f02dc80d3b66
This code was only called in the BPRED case, but had no real special
case associated with it. Made BPRED behave like all other modes. No
bitstream change.
Change-Id: I87ba11fe723928b6314d094979011228d5ba006f
Took vp9_setup_scale_factors_for_frame() out from
vp9_setup_interp_filters(), so that it is only called once per
frame instead of per macroblock. Decoder tests showed a 1.5%
performance gain.
Change-Id: I770cb09eb2140ab85132f82aed388ac0bdd3a0aa
General code cleanup in loopfilter code. Modification of setup_frame_size,
so now VP9_COMMON is modified in one place after all width/height checks
passed.
Change-Id: Iedf32df43a912d7aae788ed276ac6c429973f6fe
Rename the file and clean up includes. In the future we would like to
pattern match the files which need additional compiler flags.
Change-Id: I2c76256467f392a78dd4ccc71e6e0a580e158e56
Adding decode_sb_8x8 and decode_sb_4x4 with common code for superblock
decoding. Renaming decode_superblock32 to decode_sb32 and
decode_superblock64 to decode_sb64.
Change-Id: Id006d7e398b9bfa3acec4326e1e0c537ebfefdd3
Using clamp and MIN/MAX functions instead of plain C code. Lower case
variable names. Removing redundant parenthesis.
Change-Id: Ibf7cc5fbe4fbdb5029049a599af71534176e6f42
We used to calculate SSIM only over the postproc buffer, whereas we
calculate PSNR for both. Compared to postproc-SSIM, this is about 0.3%
higher for derf, 1.4% lower for hd and 0.5% lower for stdhd, although
it is highly variable on a per-clip basis.
Change-Id: I8dd491f0f5b4201dedfb15d288c854d5d4caa10f
The patch adds the flexibility to use standard EOB based coding
on smaller block sizes and nzc based coding on larger blocksizes.
The tx-sizes that use nzc based coding and those that use EOB based
coding are controlled by a function get_nzc_used().
By default, this function uses nzc based coding for 16x16 and 32x32
transform blocks, which seem to bridge the performance gap
substantially.
All sets are now lower by 0.5% to 0.7%, as opposed to ~1.8% before.
Change-Id: I06abed3df57b52d241ea1f51b0d571c71e38fd0b
This threshold effectively limits the amount of motion
from one end of a GF/ARF group to the other.
This patch makes the threshold depend on image size.
Change-Id: Id45d1d7bced815f86ddd037be53164894b00b82f
Almost all arguments for vp9_build_inter32x32_predictors_sb and
vp9_build_inter64x64_predictors_sb can be deduced from the first macroblock
argument.
Change-Id: I5d477a607586d05698d5b3b9b9bc03891dd3fe83
Extracting setup_frame_size and update_frame_context functions. Introducing
vp9_read_prob function as shortcut for (vp9_prob)vp9_read_literal(r, 8).
Change-Id: Ia5c68fd725b2d1b9c5eb20f69cacb62361b5a3dd
Wrote sse2 version of vp9_short_idct_32x32 function. Compared
to c version, the sse2 version is 5X faster.
Change-Id: I071ab7378358346ab4d9c6e2980f713c3c209864
This gains about 0.2% on derf, 0.1% on hd and 0.4% on stdhd. I can put
this under an experimental flag if wanted, just trying to get my patch
queue in shape.
Change-Id: Ibe1a30fe0e0b07bec4802e0f3ff0ba22e505f576
Adds an experiment to use a weighted prediction of two INTER
predictors, where the weight is one of (1/4, 3/4), (3/8, 5/8),
(1/2, 1/2), (5/8, 3/8) or (3/4, 1/4), and is chosen implicitly
based on consistency of the predictors to the already
reconstructed pixels to the top and left of the current macroblock
or superblock.
Currently the weighting is not applied to SPLITMV modes, which
default to the usual (1/2, 1/2) weighting. However the code is in
place controlled by a macro. The same weighting is used for Y and
UV components, where the weight is derived from analyzing the Y
component only.
Results (over compound inter-intra experiment)
derf: +0.18%
yt: +0.34%
hd: +0.49%
stdhd: +0.23%
The experiment suggests bigger benefit for explicitly signaled weights.
Change-Id: I5438539ff4485c5752874cd1eb078ff14bf5235a
These are mostly just for experimental purposes. I saw small gains (in
the 0.1% range) when playing with this on derf.
Change-Id: Ib21eed477bbb46bddcd73b21c5c708a5b46abedc
Now that the first AC coefficient in both directions use the same DC
as their context, there no longer is a purpose in letting both have
their own band. Merging these two bands allows us to split bands for
some of the very high-frequency AC bands.
In addition, I'm redoing the banding for the 1D-ADST col/row scans. I
don't think the old banding made any sense at all (it merged the last
coefficient of the first row/col in the same band as the first two of
the second row/col), which was clearly an oversight from the band being
applied in scan-order (rather than in their actual position). Now,
coefficients at the same position will be in the same band, regardless
what scan order is used. I think this makes most sense for the purpose
of banding, which is basically "predict energy for this coefficient
depending on the energy of context coefficients" (i.e. pt).
After full re-training, together with previous patch, derf gains about
1.2-1.3%, and hd/stdhd gain about 0.9-1.0%.
Change-Id: I7a0cc12ba724e88b278034113cb4adaaebf87e0c
Pearson correlation for above or left is significantly higher than for
previous-in-scan-order (absolute values depend on position in scan, but
in general, we gain about 0.1-0.2 by using either above or left; using
both basically just makes this even better). For eob branch skipping,
we continue to use the previous token in scan order.
This helps about 0.9% on derf after re-training on a limited data set.
Full re-training and results on larger-resolution clips are pending.
Note that this commit breaks trellis, so we can probably get further
gains out of it by fixing trellis at some later point.
Change-Id: Iead68e296fc3a105cca746b5e3da9555d6010cfe
Reoptimizes the 8-tap smooth filter.
Results:
derf: +0.101%
yt: +0.157%
hd: +0.791%
stdhd: +0.264%
The next step will be to reoptimize the other two filters.
Change-Id: I3d256a510ad9c7c30c33fae4a70fb43dfc708ed0
Lower case variable names, declaration and initialization on the same line,
removing redundant casts to double.
Change-Id: I7ea3905bed827aa6faac11a78401b85e448b57f9
Lower case variable names, removing redundant variables, declaration and
initialization on the same line.
Change-Id: Ie0c6c95b14103990eb6a9d7784f8259c662e1251
Moving code from vp9_decode_frame function into setup_loopfilter and
setup_segmentation functions. A little bit of cleanup.
Change-Id: I2cce1813e4d7aeec701ccf752bf57e3bdd41b51c
Adds a per-frame, strength adjustable, in loop deringing filter. Uses
the existing vp9_post_proc_down_and_across 5 tap thresholded blur
code, with a brute force search for the threshold.
Results almost strictly positive on the YT HD set, either having no
effect or helping PSNR in the range of 1-3% (overall average 0.8%).
Results more mixed for the CIF set, (-0.5 min, 1.4 max, 0.1 avg).
This has an almost strictly negative impact to SSIM, so examining a
different filter or a more balanced search heuristic is in order.
Other test set results pending.
Change-Id: I5ca6ee8fe292dfa3f2eab7f65332423fa1710b58
Replaces the default tables for single coefficient magnitudes with
those obtained from an appropriate distribution. The EOB node
is left unchanged. The model is represeted as a 256-size codebook
where the index corresponds to the probability of the Zero or the
One node. Two variations are implemented corresponding to whether
the Zero node or the One-node is used as the peg. The main advantage
is that the default prob tables will become considerably smaller and
manageable. Besides there is substantially less risk of over-fitting
for a training set.
Various distributions are tried and the one that gives the best
results is the family of Generalized Gaussian distributions with
shape parameter 0.75. The results are within about 0.2% of fully
trained tables for the Zero peg variant, and within 0.1% of the
One peg variant.
The forward updates are optionally (controlled by a macro)
model-based, i.e. restricted to only convey probabilities from the
codebook. Backward updates can also be optionally (controlled by
another macro) model-based, but is turned off by default. Currently
model-based forward updates work about the same as unconstrained
updates, but there is a drop in performance with backward-updates
being model based.
The model based approach also allows the probabilities for the key
frames to be adjusted from the defaults based on the base_qindex of
the frame. Currently the adjustment function is a placeholder that
adjusts the prob of EOB and Zero node from the nominal one at higher
quality (lower qindex) or lower quality (higher qindex) ends of the
range. The rest of the probabilities are then derived based on the
model from the adjusted prob of zero.
Change-Id: Iae050f3cbcc6d8b3f204e8dc395ae47b3b2192c9
Lower case variable names, code simplification by using already defined
clamp and read_le16 functions.
Change-Id: I8fd544365bd8d1daed86d7b2ae0843e4ef80df08
As things stand the zero bin mode boost is hurting somewhat.
In part this seems to be because the boost applied as is
interferes with the rd mode selection loop.
Average gains (derf 0.072, yt 0.243, ythd 0.179 std-hd 0.212%)
Change-Id: Icaecea3908d9a7352370e49b8fa822f2c2c49dc1
Wrote sse2 version of vp9_short_idct10_16x16 function. Compared
to c version, the sse2 version is 2.3X faster.
Change-Id: I314c4f09369648721798321eeed6f58e38857f26
Making consistent initialization of mb_to_{top,botton,left,right}_edge
variables after set_mb_row & set_mb_col calls. A little bit of code cleanup
additionally.
Change-Id: I245bfe32c5701e9836956dc25cf8c770d109cbc1
Wrote sse2 version of vp9_short_idct16x16 function. Compared to c
version, the sse2 version is over 2.5X faster.
Change-Id: I38536e2b846427a2cc5c5423aaf305fd0e605d61
Renaming Width to width, Height to height and Version to version in
several structs and function signatures.
Change-Id: I084c3f7e747cb2ce3345aff27a3dff9b13a87543
Wrote sse2 functions of vp9_short_idct8x8 and vp9_short_idct10_8x8.
Compared to c version, the sse2 version is 2X faster. The decoder
test didn't show noticeable gain since 8x8 idct doesn't take much
of decoding time (less than 1% in my test).
Change-Id: I56313e18cd481700b3b52c4eda5ca204ca6365f3
If the intended display size is different than the size the frame is
coded at, then send that size explicitly in the bitstream. Adds a new
bit to the frame header to indicate whether the extra size fields
are present.
Change-Id: I525c66f22d207efaf1e5f903c6a2a91b80245854
Adjust the filter length and strength for each
ARF group based on a measure of difficulty (the boost)
and the active q range.
Remove lower limit on RDMULT value.
Average gains on the different sets in range 0.4%-0.9%.
However the ARNR changes give a very big boost on a
few clips.
Eg. Soccer ~5%, in derf set and Cyclist ~ 10% in the std-hd set
Change-Id: I2078d78798e27ad2bcc2b32d703ea37b67412ec4
This fix resolves some of the mismatch issues being seen
recently. While this is the right thing to do when tiling
is used for this experiment, it is not the underlying cause
of the the mismatches.
Something else is causing writing outside of the allowable
frame area in the encoder leading to this mismatch.
Change-Id: If52c6f67555aa18ab8762865384e323b47237277
These variables are unused, and are subject to overflowing, causing
assertions when built with -ftrapv.
Change-Id: Ia00a3201af309906c05bcd4b23a643925ed6ea86
If the second reference is better than the first in the long term,
it was possible to try to take the fractional exponent of a
negative number, giving an undefined result.
Change-Id: I1dd08286747ceae960eb03bb5d98a383cc9d253b
Moving identical code to separate functions, variable declaration and
initialization on the same line.
Change-Id: Ifa6474a64189f9d8051e88e19850453b0227752c
Updates the YV12_BUFFER_CONFIG structure to be crop-aware. The
exiting width/height parameters are left unchanged, storing the
width and height algined to a 16 byte boundary. The cropped
dimensions are added as new fields.
This fixes a nasty visual pulse when switching between scaled and
unscaled frame dimensions due to a mismatch between the scaling
ratio and the 16-byte aligned sizes.
Change-Id: Id4a3f6aea6b9b9ae38bdfa1b87b7eb2cfcdd57b6
This is like VP8_COPY_REFERENCE, but returns a pointer to the reference
frame rather than a copy of it. This is useful when the application
doesn't know what the size of the reference is, as is the case when
scaling is in effect.
Change-Id: I63667109f65510364d0e397ebe56217140772085
Enable entropy coding of motion vectors up to +/-2048. Also
extend the motion search range accordingly.
Change-Id: Iac2bb015e8934521cef83a19edbe967d9f097436
The superframe index marker byte carries data in the lower 5 bits. Only the
upper 3 should be used as part of the mask to detect it. By masking with
0xf0, the previous code was incorrect for frames over 65k bytes.
Change-Id: I6248889f5af227457f359a56b2348ef6db87a3b4
If a superframe (ARF) is generated while flushing the lagged frames
at the end of the clip, the buffer pointer wasn't being properly
updated to account for the size of the index, causing the next
frame to overwrite the index on the previous frame.
Change-Id: Ib158cc8e4183d663bdfb9ba002dd4c98916abdc9
If the bool-coded partition naturally ends in a byte that matches the
superframe index marker, it could lead to a parse error. This commit
ensures that if such a marker is seen, it is padded out with an
additional zero byte to disambiguate it.
Change-Id: Id977de05745b6fa9ef08afb71e210a2a3ecca02e
When coding the frame that corresponds to the midpoint frame
defining an ARF, do not update the last reference frame buffer.
Previously this buffer was updated meaning that when coding the next
ARF all the reference buffers were the same (or nearly so).
Turning the update off means that the frame before is still available
as an alternative predictor and for use in compound prediction.
Also fixed inconsistency in test for mismatch (patch from JK).
Net average gains (derf 0.049, yt 0.163, yt-hd 0.207, std-hd 0.286)
Change-Id: Ifee21da21ccbb1648ac2eafe890d3ce60562c7bc
Removing redundant code, introducing new functions for better
decomposition, adding 'clamp' function to vp9_common.h.
Change-Id: Ic3b8ca13bbc38f60f0c9c43910b5802005e31aaf
This patch puts in an adjustment to the maximum gf/arf
interval based on the active q range. It sets a fixed
baseline maximum of 16 but can drop this down to 12 at
lower q. This required some re-ordering in the first pass
code to insure we have a Q range estimate before defining
the first gf sequence.
The main gains seed are int he STD hd set on 50fps clips
where previously the interval could rise as high as 25.
On the std hd clip the gains are around 2.8% with limit set
to 300 frames.
When combined with the one shot rate control flags we get
combined of:
derf 1.55% (limit300), yt 7.25%, hd 5.17% std-hd 5.84% (limit300)
Change-Id: Ib380d51354511f2ff0f171a8df4e74291c0421f9
Remove the temporary branch count arrays and build the adapted probabilities
while walking the tree. Gives an additional 1.5% or so on CIF.
Change-Id: I875d61e5e0ec778e5d2f7f9d0837b989a91cf3a3
The previous implementation visited each node in the tree multiple times
because it used each symbol's encoding to revisit the branches taken and
increment its count. Instead, we can traverse the tree depth first and
calculate the probabilities and branch counts as we walk back up. The
complexity goes from somewhere between O(nlogn) and O(n^2) (depending on
how balanced the tree is) to O(n).
Only tested one clip (256kbps, CIF), saw 13% decoding perf improvement.
Note that this optimization should port trivially to VP8 as well. In VP8,
the decoder doesn't use this function, but it does routinely show up
on the profile for realtime encoding.
Change-Id: I4f2848e4f41dc9a7694f73f3e75034bce08d1b12
Adds probability updates for extra bits for the nzcs, code for
getting nzc stats, plus some minor cleanups and fixes.
Change-Id: If2814e7f04fb52f5025ad9f400f3e6c50a00b543
Added SSE2 idct4_1d which is called by vp9_short_iht4x4. Also,
modified the parameter type passed to vp9_short_iht functions to
make it work with rtcd prototype.
Change-Id: I81ba7cb4db6738f1923383b52a06deb760923ffe
Increase the motion search range by 4x. Change MV_CLASS tree of the
entropy coding to allow two additional mv classes to cover the
extended motion vector limit. The codec determines the effective
motion search range conditioned on the actual frame dimension.
It provides coding gains:
stdhd 0.39%
yt 0.56%
hd 0.47%
Major coding performance gains are packed in several sequences with
intense motion activities, e.g., ped_1080p gains 7% at high bit-rates,
and on average 3%.
TODO: Need to further tune the rate control and motion search units.
Change-Id: Ib842540a6796fbee5a797809433ef6a477c6d78d
This also changes the RD search to take account of the correct block
index when searching (this is required for ADST positioning to work
correctly in combination with tx_select).
Change-Id: Ie50d05b3a024a64ecd0b376887aa38ac5f7b6af6
Yaowu found this function had a compiling issue with MSVC because
of using _mm_storel_pi((__m64 *)(dest + 0 * stride), (__m128)p0).
To be safe, changed back to use integer store instruction.
Also, for some build, diff could not always be 16-byte aligned.
Changed that in the code.
Change-Id: I9995e5446af15dad18f3c5c0bad1ae68abef6c0d
This patch revamps the entropy coding of coefficients to code first
a non-zero count per coded block and correspondingly remove the EOB
token from the token set.
STATUS:
Main encode/decode code achieving encode/decode sync - done.
Forward and backward probability updates to the nzcs - done.
Rd costing updates for nzcs - done.
Note: The dynamic progrmaming apporach used in trellis quantization
is not exactly compatible with nzcs. A suboptimal approach has been
used instead where branch costs are updated to account for changes
in the nzcs.
TODO:
Training the default probs/counts for nzcs
Change-Id: I951bc1e22f47885077a7453a09b0493daa77883d
Added a variant of the one shot maxQ flag
for two pass that forces a fixed Q for the
normal inter frames. Disabled by default.
Also small adjustment to the Bits per MB
estimation.
Change-Id: I87efdfb2d094fe1340ca9ddae37470d7b278c8b8
A 'superframe' is a group of frames that share the same PTS, but have a
defined decoding order. This commit adds the ability to append an index
to such a group of frames, allowing for random access to the constituent
frames. This could be useful for frame-level parallelism or partial
decoding in a multilayer scenario.
Decoding the stream serially without such an index should work as a
fallback, and VP9/TestSuperframeIndexIsOptional verifies that.
Change-Id: Idff83b7560e1a7077d8fb067bfbc45b567e78b1c
Split macroblock and superblock tokenization and detokenization
functions and coefficient-related data structs so that the bitstream
layout and related code of superblock coefficients looks less like it's
a hack to fit macroblocks in superblocks.
In addition, unify chroma transform size selection from luma transform
size (i.e. always use the same size, as long as it fits the predictor);
in practice, this means 32x32 and 64x64 superblocks using the 16x16 luma
transform will now use the 16x16 (instead of the 8x8) chroma transform,
and 64x64 superblocks using the 32x32 luma transform will now use the
32x32 (instead of the 16x16) chroma transform.
Lastly, add a trellis optimize function for 32x32 transform blocks.
HD gains about 0.3%, STDHD about 0.15% and derf about 0.1%. There's
a few negative points here and there that I might want to analyze
a little closer.
Change-Id: Ibad7c3ddfe1acfc52771dfc27c03e9783e054430
Fixed a couple of variable/function definitions, as well as header
handling to support 16K sequence coding at high bit-rates.
The width and height are each specified by two bytes in the header.
Use an extra byte to explicitly indicate the scaling factors in
both directions, each ranging from 0 to 15.
Tested coding up to 16400x16400 dimension.
Change-Id: Ibc2225c6036620270f2c0cf5172d1760aaec10ec
Simplified idct32x32 calculation when there are only 10 or less
non-zero coefficients in 32x32 block. This helps the decoder
performance.
Change-Id: If7f8893d27b64a9892b4b2621a37fdf4ac0c2a6d
The ABOVESPREFMV experiment uses four pixels to the left of the
current block, which don't exist for the left-most column.
Change-Id: I4cf0b42ae8f54c0b3e7b1ed8755704b74fafc39c
Removing redundant variables, using x *= y instead x = x * y, moving
variable declarations into inner blocks.
Change-Id: I884f95c755f55d51b7c1c6585f10296919063e41
The width and height stored in the reference frames are padded out to
a multiple of 16. The Width and Height variables in common are the
displayed size, which may be smaller. The incorrect comparison was
causing scaling related code to be called when it shouldn't have
been. A notable case where this happens is 1080p, since 1088 != 1080.
Change-Id: I55f743eeeeaefbf2e777e193bc9a77ff726e16b5
sse4_1 code used uint16_t for returning sad, but that
won't work for 32x32 or 64x64. This code fixes the
assembly for those and also reenables sse4_1 on linux
Change-Id: I5ce7288d581db870a148e5f7c5092826f59edd81
Fixing code style, using array lookup instead of switch statements for
forward hybrid transforms (in the same way as for their inverses).
Consistent usage of ROUND_POWER_OF_TWO macro in appropriate places.
Change-Id: I0d3822ae11f928905fdbfbe4158f91d97c71015f
This function was part of an optimization used in VP8 that required
caching two macroblocks. This is unused in VP9, and might not
survive refactoring to support superblocks, so removing it for now.
Change-Id: I744e585206ccc1ef9a402665c33863fc9fb46f0d
This patch makes the encoder's use of ref_frame_map and active_ref_idx
consistent with the decoder. ref_frame_map[] maps a reference buffer
index to its actual location in the yv12_fb array, since many
references may share an underlying buffer. active_ref_idx[] mirrors
cpi->{lst,gld,alt}_fb_idx, holding the active references in each
slot.
This also fixes a bug in setup_buffer_inter() where the incorrect
reference was used to populate the scaling factors.
Change-Id: Id3728f6d77cffcd27c248903bf51f9c3e594287e
Fixes a bug in vp9_set_internal_size() that prevented returning to
the unscaled state. Updated the ResizeInternalTest to scale both
down and up. Added a check that all frames are within 2.5% of the
quality of the initial keyframe.
Change-Id: I3b7ef17cdac144ed05b9148dce6badfa75cff5c8
This avoids duplicating all the filters twice. Includes fixups to the
convolve routines and associated tests to make this work.
Change-Id: I922f86021594e55072ddb63b42b2313605db6e00
This patch extends the previous support for using references of a
different resolution in ZEROMV mode to all inter prediction modes.
Subpixel based best-mv scoring is disabled when the reference frame
differs in resolution from the current frame.
Change-Id: Id4dc3e5e6692de98d9857fd56bfad3ac57e944ac
This commit updates the 4x4 prediction to consistently use the
build_2x1_inter_predictor() method. That function is updated to
calculate the scale offset, rather than relying on the caller
to calculate it. In the case that the 2x1 prediction can not
be used, the scale offset is recalculated for each 1x1 block.
The idea here is that the offsets are calculated before each
call to vp9_build_scaled_inter_predictor().
Change-Id: I0ac3343dd54e2846efa3c4195fcd328b709ca04d
This patch allows coding frames using references of different
resolution, in ZEROMV mode. For compound prediction, either
reference may be scaled.
To test, I use the resize_test and enable WRITE_RECON_BUFFER
in vp9_onyxd_if.c. It's also useful to apply this patch to
test/i420_video_source.h:
--- a/test/i420_video_source.h
+++ b/test/i420_video_source.h
@@ -93,6 +93,7 @@ class I420VideoSource : public VideoSource {
virtual void FillFrame() {
// Read a frame from input_file.
+ if (frame_ != 3)
if (fread(img_->img_data, raw_sz_, 1, input_file_) == 0) {
limit_ = frame_;
}
This forces the frame that the resolution changes on to be coded
with no motion, only scaling, and improves the quality of the
result.
Change-Id: I1ee75d19a437ff801192f767fd02a36bcbd1d496
Wrote SSE2 version of vp9_dc_only_idct_add_c function. In order to
improve performance, clipped the absolute diff values to [0, 255].
This allowed us to keep the additions/subtractions in 8 bits.
Test showed an over 2% decoder performance increase.
Change-Id: Ie1a236d23d207e4ffcd1fc9f3d77462a9c7fe09d
Ensure that all inter prediction goes through a common code path
that takes scaling into account. Removes a bunch of duplicate
1st/2nd predictor code. Also introduces a 16x8 mode for 8x8
MVs, similar to the 8x4 trick we were doing before. This has an
unexpected effect with EIGHTTAP_SMOOTH, so it's disabled in that
case for now.
Change-Id: Ia053e823a8bc616a988a0af30452e1e75a739cba
The commit improves the 32x32 forward dct implementation:
1. change to use same constants and rounding as other forward dcts
2. select rounding to specifically minimize the roundtrip error, which
improved average 19/block to .77/block using 100000 random input.
Test showed a small but consistent gain on all test sets, about .15%
Change-Id: If0afd6a71880a522f60c1c234be0462092c2eb53
Removing switch statements for inverse hybrid transforms. Making code style
consistent for all similar transform implementations. Renaming shortpitch
and short_pitch variables to half_pitch.
Change-Id: I875f7a82aae4e8063a58777bf1cc3f1e67b48582
