fips/Makefile: $(CC) -dumpversion can't be used to identify gcc, HP C

doesn't return error code in reply to -dumpversion.

.cvsignore

@@ -1,5 +1,4 @@
 openssl.pc
-Makefile.ssl
 MINFO
 makefile.one
 tmp
@@ -14,3 +13,6 @@ cctest.c
 cctest.a
 libcrypto.so.*
 libssl.so.*
+*.flc
+semantic.cache
+Makefile

ChangeLog.0_9_7-stable_not-in-head

@@ -0,0 +1,163 @@
+This file, together with ChangeLog.0_9_7-stable_not-in-head_FIPS,
+provides a collection of those CVS change log entries for the
+0.9.7 branch (OpenSSL_0_9_7-stable) that do not appear similarly in
+0.9.8-dev (CVS head).
+    
+ChangeLog.0_9_7-stable_not-in-head_FIPS  -  "FIPS" related changes
+ChangeLog.0_9_7-stable_not-in-head       -  everything else
+
+Some obvious false positives have been eliminated: e.g., we do not
+care about a simple "make update"; and we don't care about changes
+identified to the 0.9.7 branch that were explicitly identified as
+backports from head.
+    
+Eliminating all other entries (and finally this file and its
+compantion), either as false positives or as things that should go
+into 0.9.8, remains to be done.  Any additional changes to 0.9.7 that
+are not immediately put into 0.9.8, but belong there as well, should
+be added to the end of this file.
+
+
+2002-11-04 17:33  levitte
+
+	Changed:
+		Configure (1.314.2.38), "Exp", lines: +4 -2
+
+	Return my normal debug targets to something not so extreme, and
+	make the extreme ones special (or 'extreme', if you will :-)).
+
+2002-12-16 19:17  appro
+
+	Changed:
+		crypto/bn/bn_lcl.h (1.23.2.3), "Exp", lines: +3 -0
+		crypto/bn/bn_mul.c (1.28.2.4), "Exp", lines: +84 -445
+
+	This is rollback to 0.9.6h bn_mul.c to address problem reported in
+	RT#272.
+
+2003-07-27 15:46  ben
+
+	Changed:
+		crypto/aes/aes.h (1.1.2.5), "Exp", lines: +3 -0
+		crypto/aes/aes_cfb.c (1.1.2.4), "Exp", lines: +57 -0
+
+	Add untested CFB-r mode. Will be tested soon.
+
+2003-07-28 17:07  ben
+
+	Changed:
+		Makefile.org (1.154.2.69), "Exp", lines: +5 -1
+		crypto/aes/aes.h (1.1.2.6), "Exp", lines: +3 -0
+		crypto/aes/aes_cfb.c (1.1.2.5), "Exp", lines: +19 -0
+		crypto/dsa/Makefile.ssl (1.49.2.6), "Exp", lines: +3 -2
+		crypto/err/Makefile.ssl (1.48.2.4), "Exp", lines: +17 -16
+		crypto/evp/e_aes.c (1.6.2.5), "Exp", lines: +8 -0
+		crypto/evp/e_des.c (1.5.2.2), "Exp", lines: +1 -1
+		crypto/evp/e_des3.c (1.8.2.3), "Exp", lines: +2 -2
+		crypto/evp/evp.h (1.86.2.11), "Exp", lines: +28 -11
+		crypto/evp/evp_locl.h (1.7.2.3), "Exp", lines: +2 -2
+		crypto/objects/obj_dat.h (1.49.2.13), "Exp", lines: +10 -5
+		crypto/objects/obj_mac.h (1.19.2.13), "Exp", lines: +5 -0
+		crypto/objects/obj_mac.num (1.15.2.9), "Exp", lines: +1 -0
+		crypto/objects/objects.txt (1.20.2.14), "Exp", lines: +4 -0
+		fips/Makefile.ssl (1.1.2.3), "Exp", lines: +7 -0
+		fips/aes/Makefile.ssl (1.1.2.2), "Exp", lines: +23 -1
+		fips/aes/fips_aesavs.c (1.1.2.3), "Exp", lines: +9 -1
+		test/Makefile.ssl (1.84.2.30), "Exp", lines: +101 -43
+
+	Add support for partial CFB modes, make tests work, update
+	dependencies.
+
+2003-07-29 12:56  ben
+
+	Changed:
+		crypto/aes/aes_cfb.c (1.1.2.6), "Exp", lines: +9 -6
+		crypto/evp/c_allc.c (1.8.2.3), "Exp", lines: +1 -0
+		crypto/evp/evp_test.c (1.14.2.11), "Exp", lines: +17 -8
+		crypto/evp/evptests.txt (1.9.2.2), "Exp", lines: +48 -1
+
+	Working CFB1 and test vectors.
+
+2003-07-29 15:24  ben
+
+	Changed:
+		crypto/evp/e_aes.c (1.6.2.6), "Exp", lines: +14 -0
+		crypto/objects/obj_dat.h (1.49.2.14), "Exp", lines: +15 -5
+		crypto/objects/obj_mac.h (1.19.2.14), "Exp", lines: +10 -0
+		crypto/objects/obj_mac.num (1.15.2.10), "Exp", lines: +2 -0
+		crypto/objects/objects.txt (1.20.2.15), "Exp", lines: +2 -0
+		fips/aes/Makefile.ssl (1.1.2.3), "Exp", lines: +1 -1
+		fips/aes/fips_aesavs.c (1.1.2.4), "Exp", lines: +34 -19
+
+	The rest of the keysizes for CFB1, working AES AVS test for CFB1.
+
+2003-07-29 19:05  ben
+
+	Changed:
+		crypto/aes/aes.h (1.1.2.7), "Exp", lines: +3 -0
+		crypto/aes/aes_cfb.c (1.1.2.7), "Exp", lines: +14 -0
+		crypto/evp/c_allc.c (1.8.2.4), "Exp", lines: +1 -0
+		crypto/evp/e_aes.c (1.6.2.7), "Exp", lines: +4 -9
+		crypto/evp/evptests.txt (1.9.2.3), "Exp", lines: +48 -0
+		crypto/objects/obj_dat.h (1.49.2.15), "Exp", lines: +20 -5
+		crypto/objects/obj_mac.h (1.19.2.15), "Exp", lines: +15 -0
+		crypto/objects/obj_mac.num (1.15.2.11), "Exp", lines: +3 -0
+		crypto/objects/objects.txt (1.20.2.16), "Exp", lines: +3 -0
+		fips/aes/fips_aesavs.c (1.1.2.7), "Exp", lines: +11 -0
+
+	AES CFB8.
+
+2003-07-30 20:30  ben
+
+	Changed:
+		Makefile.org (1.154.2.70), "Exp", lines: +16 -5
+		crypto/des/cfb_enc.c (1.7.2.1), "Exp", lines: +2 -1
+		crypto/des/des_enc.c (1.11.2.2), "Exp", lines: +4 -0
+		crypto/evp/e_aes.c (1.6.2.8), "Exp", lines: +7 -14
+		crypto/evp/e_des.c (1.5.2.3), "Exp", lines: +37 -1
+		crypto/evp/evp.h (1.86.2.12), "Exp", lines: +6 -0
+		crypto/evp/evp_locl.h (1.7.2.4), "Exp", lines: +9 -0
+		crypto/objects/obj_dat.h (1.49.2.16), "Exp", lines: +48 -23
+		crypto/objects/obj_mac.h (1.19.2.16), "Exp", lines: +31 -6
+		crypto/objects/obj_mac.num (1.15.2.12), "Exp", lines: +5 -0
+		crypto/objects/objects.txt (1.20.2.17), "Exp", lines: +12 -6
+		fips/Makefile.ssl (1.1.2.4), "Exp", lines: +8 -1
+		fips/fips_make_sha1 (1.1.2.3), "Exp", lines: +3 -0
+		fips/aes/Makefile.ssl (1.1.2.4), "Exp", lines: +1 -1
+		fips/des/.cvsignore (1.1.2.1), "Exp", lines: +3 -0
+		fips/des/Makefile.ssl (1.1.2.1), "Exp", lines: +96 -0
+		fips/des/fingerprint.sha1 (1.1.2.1), "Exp", lines: +2 -0
+		fips/des/fips_des_enc.c (1.1.2.1), "Exp", lines: +288 -0
+		fips/des/fips_des_locl.h (1.1.2.1), "Exp", lines: +428 -0
+		fips/des/fips_desmovs.c (1.1.2.1), "Exp", lines: +659 -0
+
+	Whoops, forgot FIPS DES, also add EVPs for DES CFB1 and 8.
+
+2003-08-01 12:25  ben
+
+	Changed:
+		crypto/des/cfb_enc.c (1.7.2.2), "Exp", lines: +45 -36
+		crypto/evp/c_allc.c (1.8.2.5), "Exp", lines: +2 -0
+		crypto/evp/e_des.c (1.5.2.4), "Exp", lines: +8 -3
+		crypto/evp/evptests.txt (1.9.2.4), "Exp", lines: +6 -0
+
+	Fix DES CFB-r.
+
+2003-08-01 12:31  ben
+
+	Changed:
+		crypto/evp/evptests.txt (1.9.2.5), "Exp", lines: +4 -0
+
+	DES CFB8 test.
+
+2005-04-19 16:21  appro
+
+	Changed:
+		Configure (1.314.2.117), "Exp", lines: +24 -21
+		Makefile.org (1.154.2.100), "Exp", lines: +1 -11
+		TABLE (1.99.2.52), "Exp", lines: +20 -20
+		apps/Makefile (1.1.4.15), "Exp", lines: +1 -1
+		test/Makefile (1.1.4.12), "Exp", lines: +1 -1
+
+	Enable shared link on HP-UX.
+

FAQ

@@ -31,6 +31,7 @@ OpenSSL  -  Frequently Asked Questions
 * Why does my browser give a warning about a mismatched hostname?
 * How do I install a CA certificate into a browser?
 * Why is OpenSSL x509 DN output not conformant to RFC2253?
+* What is a "128 bit certificate"? Can I create one with OpenSSL?
 
 [BUILD] Questions about building and testing OpenSSL
 
@@ -46,12 +47,16 @@ OpenSSL  -  Frequently Asked Questions
 * Why does the OpenSSL test suite fail on MacOS X?
 * Why does the OpenSSL test suite fail in BN_sqr test [on a 64-bit platform]?
 * Why does OpenBSD-i386 build fail on des-586.s with "Unimplemented segment type"?
+* Why does the OpenSSL test suite fail in sha512t on x86 CPU?
+* Why does compiler fail to compile sha512.c?
+* Test suite still fails, what to do?
 
 [PROG] Questions about programming with OpenSSL
 
 * Is OpenSSL thread-safe?
 * I've compiled a program under Windows and it crashes: why?
 * How do I read or write a DER encoded buffer using the ASN1 functions?
+* OpenSSL uses DER but I need BER format: does OpenSSL support BER?
 * I've tried using <M_some_evil_pkcs12_macro> and I get errors why?
 * I've called <some function> and it fails, why?
 * I just get a load of numbers for the error output, what do they mean?
@@ -60,6 +65,7 @@ OpenSSL  -  Frequently Asked Questions
 * Can I use OpenSSL's SSL library with non-blocking I/O?
 * Why doesn't my server application receive a client certificate?
 * Why does compilation fail due to an undefined symbol NID_uniqueIdentifier?
+* I think I've detected a memory leak, is this a bug?
 
 ===============================================================================
 
@@ -68,7 +74,7 @@ OpenSSL  -  Frequently Asked Questions
 * Which is the current version of OpenSSL?
 
 The current version is available from <URL: http://www.openssl.org>.
-OpenSSL 0.9.7a was released on February 19, 2003.
+OpenSSL 0.9.8e was released on February 23rd, 2007.
 
 In addition to the current stable release, you can also access daily
 snapshots of the OpenSSL development version at <URL:
@@ -116,11 +122,14 @@ OpenSSL.  Information on the OpenSSL mailing lists is available from
 
 * Where can I get a compiled version of OpenSSL?
 
+You can finder pointers to binary distributions in
+http://www.openssl.org/related/binaries.html .
+
 Some applications that use OpenSSL are distributed in binary form.
 When using such an application, you don't need to install OpenSSL
 yourself; the application will include the required parts (e.g. DLLs).
 
-If you want to install OpenSSL on a Windows system and you don't have
+If you want to build OpenSSL on a Windows system and you don't have
 a C compiler, read the "Mingw32" section of INSTALL.W32 for information
 on how to obtain and install the free GNU C compiler.
 
@@ -136,8 +145,8 @@ less Unix-centric, it might have been used much earlier.
 
 With version 0.9.6 OpenSSL was extended to interface to external crypto
 hardware. This was realized in a special release '0.9.6-engine'. With
-version 0.9.7 (not yet released) the changes were merged into the main
+version 0.9.7 the changes were merged into the main development line,
-development line, so that the special release is no longer necessary.
+so that the special release is no longer necessary.
 
 * How do I check the authenticity of the OpenSSL distribution?
 
@@ -147,7 +156,8 @@ Use MD5 to check that a tarball from a mirror site is identical:
    md5sum TARBALL | awk '{print $1;}' | cmp - TARBALL.md5
 
 You can check authenticity using pgp or gpg. You need the OpenSSL team
-member public key used to sign it (download it from a key server). Then
+member public key used to sign it (download it from a key server, see a
+list of keys at <URL: http://www.openssl.org/about/>). Then
 just do:
 
    pgp TARBALL.asc
@@ -161,8 +171,8 @@ you if you want to use OpenSSL.  For information on intellectual
 property rights, please consult a lawyer.  The OpenSSL team does not
 offer legal advice.
 
-You can configure OpenSSL so as not to use RC5 and IDEA by using
+You can configure OpenSSL so as not to use IDEA, MDC2 and RC5 by using
- ./config no-rc5 no-idea
+ ./config no-idea no-mdc2 no-rc5
 
 
 * Can I use OpenSSL with GPL software?
@@ -378,6 +388,43 @@ interface, the "-nameopt" option could be introduded. See the manual
 page of the "openssl x509" commandline tool for details. The old behaviour
 has however been left as default for the sake of compatibility.
 
+* What is a "128 bit certificate"? Can I create one with OpenSSL?
+
+The term "128 bit certificate" is a highly misleading marketing term. It does
+*not* refer to the size of the public key in the certificate! A certificate
+containing a 128 bit RSA key would have negligible security.
+
+There were various other names such as "magic certificates", "SGC
+certificates", "step up certificates" etc.
+
+You can't generally create such a certificate using OpenSSL but there is no
+need to any more. Nowadays web browsers using unrestricted strong encryption
+are generally available.
+
+When there were tight export restrictions on the export of strong encryption
+software from the US only weak encryption algorithms could be freely exported
+(initially 40 bit and then 56 bit). It was widely recognised that this was
+inadequate. A relaxation the rules allowed the use of strong encryption but
+only to an authorised server.
+
+Two slighly different techniques were developed to support this, one used by
+Netscape was called "step up", the other used by MSIE was called "Server Gated
+Cryptography" (SGC). When a browser initially connected to a server it would
+check to see if the certificate contained certain extensions and was issued by
+an authorised authority. If these test succeeded it would reconnect using
+strong encryption.
+
+Only certain (initially one) certificate authorities could issue the
+certificates and they generally cost more than ordinary certificates.
+
+Although OpenSSL can create certificates containing the appropriate extensions
+the certificate would not come from a permitted authority and so would not
+be recognized.
+
+The export laws were later changed to allow almost unrestricted use of strong
+encryption so these certificates are now obsolete.
+
+
 [BUILD] =======================================================================
 
 * Why does the linker complain about undefined symbols?
@@ -467,6 +514,10 @@ This will only compile sha_dgst.c with -O0, the rest with the optimization
 level chosen by the configuration process.  When the above is done, do the
 test and installation and you're set.
 
+3. Reconfigure the toolkit with no-sha0 option to leave out SHA0. It 
+should not be used and is not used in SSL/TLS nor any other recognized
+protocol in either case.
+
 
 * Why does the OpenSSL compilation fail with "ar: command not found"?
 
@@ -588,6 +639,35 @@ Reportedly elder *BSD a.out platforms also suffer from this problem and
 remedy should be same. Provided binary is statically linked and should be
 working across wider range of *BSD branches, not just OpenBSD.
 
+* Why does the OpenSSL test suite fail in sha512t on x86 CPU?
+
+If the test program in question fails withs SIGILL, Illegal Instruction
+exception, then you more than likely to run SSE2-capable CPU, such as
+Intel P4, under control of kernel which does not support SSE2
+instruction extentions. See accompanying INSTALL file and
+OPENSSL_ia32cap(3) documentation page for further information.
+
+* Why does compiler fail to compile sha512.c?
+
+OpenSSL SHA-512 implementation depends on compiler support for 64-bit
+integer type. Few elder compilers [ULTRIX cc, SCO compiler to mention a
+couple] lack support for this and therefore are incapable of compiling
+the module in question. The recommendation is to disable SHA-512 by
+adding no-sha512 to ./config [or ./Configure] command line. Another
+possible alternative might be to switch to GCC.
+
+* Test suite still fails, what to do?
+
+Another common reason for failure to complete some particular test is
+simply bad code generated by a buggy component in toolchain or deficiency
+in run-time environment. There are few cases documented in PROBLEMS file,
+consult it for possible workaround before you beat the drum. Even if you
+don't find solution or even mention there, do reserve for possibility of
+a compiler bug. Compiler bugs might appear in rather bizarre ways, they
+never make sense, and tend to emerge when you least expect them. In order
+to identify one, drop optimization level, e.g. by editing CFLAG line in
+top-level Makefile, recompile and re-run the test.
+
 [PROG] ========================================================================
 
 * Is OpenSSL thread-safe?
@@ -599,8 +679,9 @@ libraries.  If your platform is not one of these, consult the INSTALL
 file.
 
 Multi-threaded applications must provide two callback functions to
-OpenSSL.  This is described in the threads(3) manpage.
+OpenSSL by calling CRYPTO_set_locking_callback() and
-
+CRYPTO_set_id_callback().  This is described in the threads(3)
+manpage.
 
 * I've compiled a program under Windows and it crashes: why?
 
@@ -642,12 +723,26 @@ by:
 Note that debug and release libraries are NOT interchangeable.  If you
 built OpenSSL with /MD your application must use /MD and cannot use /MDd.
 
+As per 0.9.8 the above limitation is eliminated for .DLLs. OpenSSL
+.DLLs compiled with some specific run-time option [we insist on the
+default /MD] can be deployed with application compiled with different
+option or even different compiler. But there is a catch! Instead of
+re-compiling OpenSSL toolkit, as you would have to with prior versions,
+you have to compile small C snippet with compiler and/or options of
+your choice. The snippet gets installed as
+<install-root>/include/openssl/applink.c and should be either added to
+your application project or simply #include-d in one [and only one]
+of your application source files. Failure to link this shim module
+into your application manifests itself as fatal "no OPENSSL_Applink"
+run-time error. An explicit reminder is due that in this situation
+[mixing compiler options] it is as important to add CRYPTO_malloc_init
+prior first call to OpenSSL.
 
 * How do I read or write a DER encoded buffer using the ASN1 functions?
 
 You have two options. You can either use a memory BIO in conjunction
-with the i2d_XXX_bio() or d2i_XXX_bio() functions or you can use the
+with the i2d_*_bio() or d2i_*_bio() functions or you can use the
-i2d_XXX(), d2i_XXX() functions directly. Since these are often the
+i2d_*(), d2i_*() functions directly. Since these are often the
 cause of grief here are some code fragments using PKCS7 as an example:
 
  unsigned char *buf, *p;
@@ -680,6 +775,20 @@ and attempts to free the buffer will have unpredictable results
 because it no longer points to the same address.
 
 
+* OpenSSL uses DER but I need BER format: does OpenSSL support BER?
+
+The short answer is yes, because DER is a special case of BER and OpenSSL
+ASN1 decoders can process BER.
+
+The longer answer is that ASN1 structures can be encoded in a number of
+different ways. One set of ways is the Basic Encoding Rules (BER) with various
+permissible encodings. A restriction of BER is the Distinguished Encoding
+Rules (DER): these uniquely specify how a given structure is encoded.
+
+Therefore, because DER is a special case of BER, DER is an acceptable encoding
+for BER.
+
+
 * I've tried using <M_some_evil_pkcs12_macro> and I get errors why?
 
 This usually happens when you try compiling something using the PKCS#12
@@ -732,6 +841,7 @@ The general answer is to check the config.log file generated when running
 the OpenSSH configure script. It should contain the detailed information
 on why the OpenSSL library was not detected or considered incompatible.
 
+
 * Can I use OpenSSL's SSL library with non-blocking I/O?
 
 Yes; make sure to read the SSL_get_error(3) manual page!
@@ -761,5 +871,28 @@ The correct name according to RFC2256 (LDAP) is x500UniqueIdentifier.
 Change your code to use the new name when compiling against OpenSSL 0.9.7.
 
 
+* I think I've detected a memory leak, is this a bug?
+
+In most cases the cause of an apparent memory leak is an OpenSSL internal table
+that is allocated when an application starts up. Since such tables do not grow
+in size over time they are harmless.
+
+These internal tables can be freed up when an application closes using various
+functions.  Currently these include following:
+
+Thread-local cleanup functions:
+
+  ERR_remove_state()
+
+Application-global cleanup functions that are aware of usage (and therefore
+thread-safe):
+
+  ENGINE_cleanup() and CONF_modules_unload()
+
+"Brutal" (thread-unsafe) Application-global cleanup functions:
+
+  ERR_free_strings(), EVP_cleanup() and CRYPTO_cleanup_all_ex_data().
+
+
 ===============================================================================
 

INSTALL

@@ -2,8 +2,10 @@
  INSTALLATION ON THE UNIX PLATFORM
  ---------------------------------
 
- [Installation on DOS (with djgpp), Windows, OpenVMS and MacOS (before MacOS X)
+ [Installation on DOS (with djgpp), Windows, OpenVMS, MacOS (before MacOS X)
-  is described in INSTALL.DJGPP, INSTALL.W32, INSTALL.VMS and INSTALL.MacOS.
+  and NetWare is described in INSTALL.DJGPP, INSTALL.W32, INSTALL.VMS,
+  INSTALL.MacOS and INSTALL.NW.
+  
   This document describes installation on operating systems in the Unix
   family.]
 
@@ -73,14 +75,30 @@
   no-asm        Do not use assembler code.
 
   386           Use the 80386 instruction set only (the default x86 code is
-                more efficient, but requires at least a 486).
+                more efficient, but requires at least a 486). Note: Use
+                compiler flags for any other CPU specific configuration,
+                e.g. "-m32" to build x86 code on an x64 system.
+
+  no-sse2	Exclude SSE2 code pathes. Normally SSE2 extention is
+		detected at run-time, but the decision whether or not the
+		machine code will be executed is taken solely on CPU
+		capability vector. This means that if you happen to run OS
+		kernel which does not support SSE2 extension on Intel P4
+		processor, then your application might be exposed to
+		"illegal instruction" exception. There might be a way
+		to enable support in kernel, e.g. FreeBSD kernel can be
+		compiled with CPU_ENABLE_SSE, and there is a way to
+		disengage SSE2 code pathes upon application start-up,
+		but if you aim for wider "audience" running such kernel,
+		consider no-sse2. Both 386 and no-asm options above imply
+		no-sse2.
 
   no-<cipher>   Build without the specified cipher (bf, cast, des, dh, dsa,
                 hmac, md2, md5, mdc2, rc2, rc4, rc5, rsa, sha).
                 The crypto/<cipher> directory can be removed after running
                 "make depend".
 
-  -Dxxx, -lxxx, -Lxxx, -fxxx, -Kxxx These system specific options will
+  -Dxxx, -lxxx, -Lxxx, -fxxx, -mxxx, -Kxxx These system specific options will
                 be passed through to the compiler to allow you to
                 define preprocessor symbols, specify additional libraries,
                 library directories or other compiler options.
@@ -284,10 +302,10 @@
  Note on shared libraries
  ------------------------
 
- Shared library is currently an experimental feature.  The only reason to
+ Shared libraries have certain caveats.  Binary backward compatibility
- have them would be to conserve memory on systems where several program
+ can't be guaranteed before OpenSSL version 1.0.  The only reason to
- are using OpenSSL.  Binary backward compatibility can't be guaranteed
+ use them would be to conserve memory on systems where several programs
- before OpenSSL version 1.0.
+ are using OpenSSL.
 
  For some systems, the OpenSSL Configure script knows what is needed to
  build shared libraries for libcrypto and libssl.  On these systems,
@@ -312,7 +330,7 @@
  Note on support for multiple builds
  -----------------------------------
 
- OpenSSL is usually built in it's source tree.  Unfortunately, this doesn't
+ OpenSSL is usually built in its source tree.  Unfortunately, this doesn't
  support building for multiple platforms from the same source tree very well.
  It is however possible to build in a separate tree through the use of lots
  of symbolic links, which should be prepared like this:

INSTALL.DJGPP

@@ -3,32 +3,45 @@
  INSTALLATION ON THE DOS PLATFORM WITH DJGPP
  -------------------------------------------
 
- Openssl has been ported to DOS, but only with long filename support. If
+ OpenSSL has been ported to DJGPP, a Unix look-alike 32-bit run-time
- you wish to compile on native DOS with 8+3 filenames, you will have to
+ environment for 16-bit DOS, but only with long filename support.
- tweak the installation yourself, including renaming files with illegal
+ If you wish to compile on native DOS with 8+3 filenames, you will
- or duplicate names.
+ have to tweak the installation yourself, including renaming files
+ with illegal or duplicate names.
 
  You should have a full DJGPP environment installed, including the
  latest versions of DJGPP, GCC, BINUTILS, BASH, etc. This package
  requires that PERL and BC also be installed.
 
- All of these can be obtained from the usual DJGPP mirror sites, such
+ All of these can be obtained from the usual DJGPP mirror sites or
- as "ftp://ftp.simtel.net/pub/simtelnet/gnu/djgpp". You also need to
+ directly at "http://www.delorie.com/pub/djgpp". For help on which
- have the WATT-32 networking package installed before you try to compile
+ files to download, see the DJGPP "ZIP PICKER" page at
- openssl. This can be obtained from "http://www.bgnett.no/~giva/".
+ "http://www.delorie.com/djgpp/zip-picker.html". You also need to have
+ the WATT-32 networking package installed before you try to compile
+ OpenSSL. This can be obtained from "http://www.bgnett.no/~giva/".
  The Makefile assumes that the WATT-32 code is in the directory
  specified by the environment variable WATT_ROOT. If you have watt-32
  in directory "watt32" under your main DJGPP directory, specify
  WATT_ROOT="/dev/env/DJDIR/watt32".
 
- To compile openssl, start your BASH shell. Then configure for DOS by
+ To compile OpenSSL, start your BASH shell, then configure for DJGPP by
- running "./Configure" with appropriate arguments. The basic syntax for
+ running "./Configure" with appropriate arguments:
- DOS is:
+
 	./Configure no-threads --prefix=/dev/env/DJDIR DJGPP
  
- You may run out of DPMI selectors when running in a DOS box under
+ And finally fire up "make". You may run out of DPMI selectors when
- Windows. If so, just close the BASH shell, go back to Windows, and
+ running in a DOS box under Windows. If so, just close the BASH
- restart BASH. Then run "make" again.
+ shell, go back to Windows, and restart BASH. Then run "make" again.
 
- Building openssl under DJGPP has been tested with DJGPP 2.03,
+ RUN-TIME CAVEAT LECTOR
- GCC 2.952, GCC 2.953, perl 5.005_02 and perl 5.006_01.
+ --------------
+
+ Quoting FAQ:
+
+  "Cryptographic software needs a source of unpredictable data to work
+   correctly.  Many open source operating systems provide a "randomness
+   device" (/dev/urandom or /dev/random) that serves this purpose."
+
+ As of version 0.9.7f DJGPP port checks upon /dev/urandom$ for a 3rd
+ party "randomness" DOS driver. One such driver, NOISE.SYS, can be
+ obtained from "http://www.rahul.net/dkaufman/index.html".

INSTALL.NW

@@ -0,0 +1,444 @@
+
+INSTALLATION ON THE NETWARE PLATFORM
+------------------------------------
+
+Notes about building OpenSSL for NetWare.
+
+
+BUILD PLATFORM:
+---------------
+The build scripts (batch files, perl scripts, etc) have been developed and
+tested on W2K.  The scripts should run fine on other Windows
+platforms (NT, Win9x, WinXP) but they haven't been tested.  They may require 
+some modifications.
+
+
+Supported NetWare Platforms - NetWare 5.x, NetWare 6.x:
+------------------------------------------
+OpenSSL uses the WinSock interfaces introduced in NetWare 5.  Therefore,
+previous versions of NetWare, 4.x and 3.x, are not supported.
+
+On NetWare there are two c-runtime libraries.  There is the legacy CLIB 
+interfaces and the newer LibC interfaces.  Being ANSI-C libraries, the 
+functionality in CLIB and LibC is similar but the LibC interfaces are built 
+using Novell Kernal Services (NKS) which is designed to leverage 
+multi-processor environments.
+
+The NetWare port of OpenSSL can configured to build using CLIB or LibC.  The 
+CLIB build was developed and tested using NetWare 5.0 sp6.0a.  The LibC 
+build was developed and tested using the NetWare 6.0 FCS.  
+
+The necessary LibC functionality ships with NetWare 6.  However, earlier 
+NetWare 5.x versions will require updates in order to run the OpenSSL LibC
+build.
+
+As of June 2005, the LibC build can be configured to use BSD sockets instead
+of WinSock sockets. Call Configure (usually through netware\build.bat) using
+a target of "netware-libc-bsdsock" instead of "netware-libc".
+
+
+REQUIRED TOOLS:
+---------------
+Based upon the configuration and build options used, some or all of the
+following tools may be required:
+
+
+* Perl for Win32 - required (http://www.activestate.com/ActivePerl)
+   Used to run the various perl scripts on the build platform.
+
+
+* Perl 5.8.0 for NetWare v3.20 (or later) - required 
+   (http://developer.novell.com) Used to run the test script on NetWare 
+   after building.
+
+
+* Metrowerks CodeWarrior PDK 2.1 (or later) for NetWare - required:
+   Provides command line tools used for building.
+
+   Tools:
+   mwccnlm.exe  - C/C++ Compiler for NetWare
+   mwldnlm.exe  - Linker for NetWare
+   mwasmnlm.exe - x86 assembler for NetWare (if using assembly option)
+
+
+* Assemblers - optional:
+   If you intend to build using the assembly options you will need an
+   assembler.  Work has been completed to support two assemblers, Metrowerks
+   and NASM.  However, during development, a bug was found in the Metrowerks
+   assembler which generates incorrect code.  Until this problem is fixed,
+   the Metrowerks assembler cannot be used.
+
+   mwasmnlm.exe - Metrowerks x86 assembler - part of CodeWarrior tools.
+         (version 2.2 Built Aug 23, 1999 - not useable due to code
+          generation bug)
+
+   nasmw.exe - Netwide Assembler NASM
+         version 0.98 was used in development and testing
+
+* Make Tool - required:
+   In order to build you will need a make tool.  Two make tools are
+   supported, GNU make (gmake.exe) or Microsoft nmake.exe.
+
+   gmake.exe - GNU make for Windows (version 3.75 used for development)
+         http://www.gnu.org/software/make/make.html
+
+   nmake.exe - Microsoft make (Version 6.00.8168.0 used for development)
+
+
+* Novell Developer Kit (NDK) - required: (http://developer.novell.com)
+
+   CLIB - BUILDS:
+
+      WinSock2 Developer Components for NetWare:
+         For initial development, the October 27, 2000 version was used.
+         However, future versions should also work.
+
+         NOTE:  The WinSock2 components include headers & import files for
+         NetWare, but you will also need the winsock2.h and supporting
+         headers (pshpack4.h, poppack.h, qos.h) delivered in the
+         Microsoft SDK.  Note: The winsock2.h support headers may change
+         with various versions of winsock2.h.  Check the dependencies
+         section on the NDK WinSock2 download page for the latest
+         information on dependencies. These components are unsupported by
+         Novell. They are provided as a courtesy, but it is strongly
+         suggested that all development be done using LIBC, not CLIB.
+
+         As of June 2005, the WinSock2 components are available at:
+         http://forgeftp.novell.com//ws2comp/
+
+
+      NLM and NetWare libraries for C (including CLIB and XPlat):
+         If you are going to build a CLIB version of OpenSSL, you will
+         need the CLIB headers and imports.  The March, 2001 NDK release or 
+         later is recommended.
+
+         Earlier versions should work but haven't been tested.  In recent
+         versions the import files have been consolidated and function
+         names moved.  This means you may run into link problems
+         (undefined symbols) when using earlier versions.   The functions
+         are available in earlier versions, but you will have to modifiy
+         the make files to include additional import files (see
+         openssl\util\pl\netware.pl).
+
+
+   LIBC - BUILDS:
+   
+      Libraries for C (LibC) - LibC headers and import files
+         If you are going to build a LibC version of OpenSSL, you will
+         need the LibC headers and imports.  The March 14, 2002 NDK release or
+         later is required.  
+         
+         NOTE: The LibC SDK includes the necessary WinSock2 support.  It
+         It is not necessary to download the WinSock2 Developer when building
+         for LibC. The LibC SDK also includes the appropriate BSD socket support
+         if configuring to use BSD sockets.
+
+
+BUILDING:
+---------
+Before building, you will need to set a few environment variables.  You can
+set them manually or you can modify the "netware\set_env.bat" file.
+
+The set_env.bat file is a template you can use to set up the path
+and environment variables you will need to build.  Modify the
+various lines to point to YOUR tools and run set_env.bat.
+
+   netware\set_env.bat [target]
+
+      target        - "netware-clib" - CLib NetWare build
+                    - "netware-libc" - LibC NetWare build
+
+If you don't use set_env.bat, you will need to set up the following
+environment variables:
+
+   path - Set path to point to the tools you will use.
+
+   MWCIncludes - The location of the NDK include files.
+         
+            CLIB ex: set MWCIncludes=c:\ndk\nwsdk\include\nlm
+            LibC ex: set MWCIncludes=c:\ndk\libc\include
+
+   PRELUDE - The absolute path of the prelude object to link with.  For
+            a CLIB build it is recommended you use the "clibpre.o" files shipped
+            with the Metrowerks PDK for NetWare.  For a LibC build you should 
+            use the "libcpre.o" file delivered with the LibC NDK components.
+
+            CLIB ex: set PRELUDE=c:\ndk\nwsdk\imports\clibpre.o
+            LibC ex: set PRELUDE=c:\ndk\libc\imports\libcpre.o
+
+   IMPORTS - The locaton of the NDK import files.
+
+            CLIB ex: set IMPORTS=c:\ndk\nwsdk\imports
+            LibC ex: set IMPORTS=c:\ndk\libc\imports
+
+
+In order to build, you need to run the Perl scripts to configure the build
+process and generate a make file.  There is a batch file,
+"netware\build.bat", to automate the process.
+
+Build.bat runs the build configuration scripts and generates a make file.
+If an assembly option is specified, it also runs the scripts to generate 
+the assembly code.  Always run build.bat from the "openssl" directory.
+
+   netware\build [target] [debug opts] [assembly opts] [configure opts]
+
+      target        - "netware-clib" - CLib NetWare build (WinSock Sockets)
+                    - "netware-libc" - LibC NetWare build (WinSock Sockets)
+                    - "netware-libc-bsdsock" - LibC NetWare build (BSD Sockets)
+ 
+      debug opts    - "debug"  - build debug
+
+      assembly opts - "nw-mwasm" - use Metrowerks assembler
+                      "nw-nasm"  - use NASM assembler
+                      "no-asm"   - don't use assembly
+
+      configure opts- all unrecognized arguments are passed to the
+                      perl configure script
+
+   examples:
+
+      CLIB build, debug, without assembly:
+         netware\build.bat netware-clib debug no-asm
+
+      LibC build, non-debug, using NASM assembly:
+         netware\build.bat netware-libc nw-nasm
+
+      LibC build, BSD sockets, non-debug, without assembly:
+         netware\build.bat netware-libc-bsdsock no-asm
+
+Running build.bat generates a make file to be processed by your make 
+tool (gmake or nmake):
+
+   CLIB ex: gmake -f netware\nlm_clib_dbg.mak 
+   LibC ex: gmake -f netware\nlm_libc.mak 
+   LibC ex: gmake -f netware\nlm_libc_bsdsock.mak 
+
+
+You can also run the build scripts manually if you do not want to use the
+build.bat file.  Run the following scripts in the "\openssl"
+subdirectory (in the order listed below):
+
+   perl configure no-asm [other config opts] [netware-clib|netware-libc|netware-libc-bsdsock]
+      configures no assembly build for specified netware environment
+      (CLIB or LibC).
+
+   perl util\mkfiles.pl >MINFO
+      generates a listing of source files (used by mk1mf)
+
+   perl util\mk1mf.pl no-asm [other config opts] [netware-clib|netware-libc|netware-libc-bsdsock >netware\nlm.mak
+      generates the makefile for NetWare
+
+   gmake -f netware\nlm.mak
+      build with the make tool (nmake.exe also works)
+
+NOTE:  If you are building using the assembly option, you must also run the
+various Perl scripts to generate the assembly files.  See build.bat
+for an example of running the various assembly scripts.  You must use the
+"no-asm" option to build without assembly.  The configure and mk1mf scripts
+also have various other options.  See the scripts for more information.
+
+
+The output from the build is placed in the following directories:
+
+   CLIB Debug build:
+      out_nw_clib.dbg     - static libs & test nlm(s)
+      tmp_nw_clib.dbg     - temporary build files
+      outinc_nw_clib      - necessary include files
+
+   CLIB Non-debug build:
+      out_nw_clib         - static libs & test nlm(s)
+      tmp_nw_clib         - temporary build files
+      outinc_nw_clib      - necesary include files
+
+   LibC Debug build:
+      out_nw_libc.dbg     - static libs & test nlm(s)
+      tmp_nw_libc.dbg     - temporary build files
+      outinc_nw_libc      - necessary include files
+
+   LibC Non-debug build:
+      out_nw_libc         - static libs & test nlm(s)
+      tmp_nw_libc         - temporary build files
+      outinc_nw_libc      - necesary include files
+
+
+TESTING:
+--------
+The build process creates the OpenSSL static libs ( crypto.lib, ssl.lib,
+rsaglue.lib ) and several test programs.  You should copy the test programs
+to your NetWare server and run the tests.
+
+The batch file "netware\cpy_tests.bat" will copy all the necessary files
+to your server for testing.  In order to run the batch file, you need a
+drive mapped to your target server.  It will create an "OpenSSL" directory
+on the drive and copy the test files to it.  CAUTION: If a directory with the
+name of "OpenSSL" already exists, it will be deleted.
+
+To run cpy_tests.bat:
+
+   netware\cpy_tests [output directory] [NetWare drive]
+
+      output directory - "out_nw_clib.dbg", "out_nw_libc", etc.
+      NetWare drive    - drive letter of mapped drive
+
+      CLIB ex: netware\cpy_tests out_nw_clib m:
+      LibC ex: netware\cpy_tests out_nw_libc m:
+
+
+The Perl script, "do_tests.pl", in the "OpenSSL" directory on the server
+should be used to execute the tests.  Before running the script, make sure
+your SEARCH PATH includes the "OpenSSL" directory.  For example, if you
+copied the files to the "sys:" volume you use the command:
+
+   SEARCH ADD SYS:\OPENSSL
+
+
+To run do_tests.pl type (at the console prompt):
+
+   perl \openssl\do_tests.pl [options]
+
+      options:
+         -p    - pause after executing each test
+
+The do_tests.pl script generates a log file "\openssl\test_out\tests.log"
+which should be reviewed for errors.  Any errors will be denoted by the word
+"ERROR" in the log.
+
+DEVELOPING WITH THE OPENSSL SDK:
+--------------------------------
+Now that everything is built and tested, you are ready to use the OpenSSL
+libraries in your development.
+
+There is no real installation procedure, just copy the static libs and
+headers to your build location.  The libs (crypto.lib & ssl.lib) are
+located in the appropriate "out_nw_XXXX" directory 
+(out_nw_clib, out_nw_libc, etc).  
+
+The headers are located in the appropriate "outinc_nw_XXX" directory 
+(outinc_nw_clib, outinc_nw_libc).  
+
+One suggestion is to create the following directory 
+structure for the OpenSSL SDK:
+
+   \openssl
+      |- bin
+      |   |- openssl.nlm
+      |   |- (other tests you want)
+      |
+      |- lib
+      |   | - crypto.lib
+      |   | - ssl.lib
+      |
+      |- include
+      |   | - openssl
+      |   |    | - (all the headers in "outinc_nw\openssl")
+
+
+The program "openssl.nlm" can be very useful.  It has dozens of
+options and you may want to keep it handy for debugging, testing, etc.
+
+When building your apps using OpenSSL, define "NETWARE".  It is needed by
+some of the OpenSSL headers.  One way to do this is with a compile option,
+for example "-DNETWARE".
+
+
+
+NOTES:
+------
+
+Resource leaks in Tests
+------------------------
+Some OpenSSL tests do not clean up resources and NetWare reports
+the resource leaks when the tests unload.  If this really bugs you,
+you can stop the messages by setting the developer option off at the console
+prompt (set developer option = off).  Or better yet, fix the tests to
+clean up the resources!
+
+
+Multi-threaded Development
+---------------------------
+The NetWare version of OpenSSL is thread-safe however, multi-threaded
+applications must provide the necessary locking function callbacks.  This
+is described in doc\threads.doc.  The file "openssl\crypto\threads\mttest.c"
+is a multi-threaded test program and demonstrates the locking functions.
+
+
+What is openssl2.nlm?
+---------------------
+The openssl program has numerous options and can be used for many different
+things.  Many of the options operate in an interactive mode requiring the
+user to enter data.  Because of this, a default screen is created for the
+program.  However, when running the test script it is not desirable to
+have a seperate screen.  Therefore, the build also creates openssl2.nlm.
+Openssl2.nlm is functionally identical but uses the console screen.
+Openssl2 can be used when a non-interactive mode is desired.
+
+NOTE:  There are may other possibilities (command line options, etc)
+which could have been used to address the screen issue.  The openssl2.nlm
+option was chosen because it impacted only the build not the code.
+
+
+Why only static libraries?
+--------------------------
+Globals, globals, and more globals.  The OpenSSL code uses many global
+variables that are allocated and initialized when used for the first time.
+
+On NetWare, most applications (at least historically) run in the kernel.
+When running in the kernel, there is one instance of global variables.
+For regular application type NLM(s) this isn't a problem because they are
+the only ones using the globals.  However, for a library NLM (an NLM which
+exposes functions and has no threads of execution), the globals cause
+problems.  Applications could inadvertently step on each other if they
+change some globals.  Even worse, the first application that triggers a
+global to be allocated and initialized has the allocated memory charged to
+itself.  Now when that application unloads, NetWare will clean up all the
+applicaton's memory.  The global pointer variables inside OpenSSL now
+point to freed memory.  An abend waiting to happen!
+
+To work correctly in the kernel, library NLM(s) that use globals need to
+provide a set of globals (instance data) for each application.  Another
+option is to require the library only be loaded in a protected address
+space along with the application using it.
+
+Modifying the OpenSSL code to provide a set of globals (instance data) for
+each application isn't technically difficult, but due to the large number
+globals it would require substantial code changes and it wasn't done.  Hence,
+the build currently only builds static libraries which are then linked
+into each application.
+
+NOTE:  If you are building a library NLM that uses the OpenSSL static
+libraries, you will still have to deal with the global variable issue.
+This is because when you link in the OpenSSL code you bring in all the
+globals.  One possible solution for the global pointer variables is to
+register memory functions with OpenSSL which allocate memory and charge it
+to your library NLM (see the function CRYPTO_set_mem_functions).  However,
+be aware that now all memory allocated by OpenSSL is charged to your NLM.
+
+
+CodeWarrior Tools and W2K
+---------------------------
+There have been problems reported with the CodeWarrior Linker
+(mwldnlm.exe) in the PDK 2.1 for NetWare when running on Windows 2000.  The
+problems cause the link step to fail.  The only work around is to obtain an
+updated linker from Metrowerks.  It is expected Metrowerks will release
+PDK 3.0 (in beta testing at this time - May, 2001) in the near future which
+will fix these problems.
+
+
+Makefile "vclean"
+------------------
+The generated makefile has a "vclean" target which cleans up the build
+directories.  If you have been building successfully and suddenly
+experience problems, use "vclean" (gmake -f netware\nlm.mak vclean) and retry.
+
+
+"Undefined Symbol" Linker errors
+--------------------------------
+There have been linker errors reported when doing a CLIB build.  The problems
+occur because some versions of the CLIB SDK import files inadvertently 
+left out some symbols.  One symbol in particular is "_lrotl".  The missing
+functions are actually delivered in the binaries, but they were left out of
+the import files.  The issues should be fixed in the September 2001 release 
+of the NDK.  If you experience the problems you can temporarily
+work around it by manually adding the missing symbols to your version of 
+"clib.imp".
+

INSTALL.W32

@@ -3,6 +3,7 @@
  ----------------------------------
 
  [Instructions for building for Windows CE can be found in INSTALL.WCE]
+ [Instructions for building for Win64 can be found in INSTALL.W64]
 
  Heres a few comments about building OpenSSL in Windows environments.  Most
  of this is tested on Win32 but it may also work in Win 3.1 with some
@@ -10,13 +11,20 @@
 
  You need Perl for Win32.  Unless you will build on Cygwin, you will need
  ActiveState Perl, available from http://www.activestate.com/ActivePerl.
- For Cygwin users, there's more info in the Cygwin section.
 
  and one of the following C compilers:
 
   * Visual C++
   * Borland C
-  * GNU C (Mingw32 or Cygwin)
+  * GNU C (Cygwin or MinGW)
+
+ If you are compiling from a tarball or a CVS snapshot then the Win32 files
+ may well be not up to date. This may mean that some "tweaking" is required to
+ get it all to work. See the trouble shooting section later on for if (when?)
+ it goes wrong.
+
+ Visual C++
+ ----------
 
  If you want to compile in the assembly language routines with Visual C++ then
  you will need an assembler. This is worth doing because it will result in
@@ -39,17 +47,11 @@
  http://www.kernel.org/pub/software/devel/nasm/binaries/win32/
  The NASM binary nasmw.exe needs to be installed anywhere on your PATH.
 
- If you are compiling from a tarball or a CVS snapshot then the Win32 files
- may well be not up to date. This may mean that some "tweaking" is required to
- get it all to work. See the trouble shooting section later on for if (when?)
- it goes wrong.
-
- Visual C++
- ----------
-
  Firstly you should run Configure:
 
- > perl Configure VC-WIN32
+ > perl Configure VC-WIN32 --prefix=c:/some/openssl/dir
+
+Where the prefix argument specifies where OpenSSL will be installed to.
 
  Next you need to build the Makefiles and optionally the assembly language
  files:
@@ -77,8 +79,12 @@
  If all is well it should compile and you will have some DLLs and executables
  in out32dll. If you want to try the tests then do:
  
- > cd out32dll
+ > nmake -f ms\ntdll.mak test
- > ..\ms\test
+
+
+To install OpenSSL to the specified location do:
+
+> nmake -f ms\ntdll.mak install
 
  Tweaks:
 
@@ -88,6 +94,12 @@
  compiled in. Note that mk1mf.pl expects the platform to be the last argument
  on the command line, so 'debug' must appear before that, as all other options.
 
+
+ By default in 0.9.8 OpenSSL will compile builtin ENGINES into the libeay32.dll
+ shared library. If you specify the "no-static-engine" option on the command
+ line to Configure the shared library build (ms\ntdll.mak) will compile the
+ engines as separate DLLs.
+
  The default Win32 environment is to leave out any Windows NT specific
  features.
 
@@ -98,6 +110,8 @@
  You can also build a static version of the library using the Makefile
  ms\nt.mak
 
+
+
  Borland C++ builder 5
  ---------------------
 
@@ -120,18 +134,72 @@
  * Run make:
    > make -f bcb.mak
 
- GNU C (Mingw32)
+ GNU C (Cygwin)
- ---------------
+ --------------
 
- To build OpenSSL, you need the Mingw32 package and GNU make.
+ Cygwin provides a bash shell and GNU tools environment running
+ on NT 4.0, Windows 9x, Windows ME, Windows 2000, and Windows XP.
+ Consequently, a make of OpenSSL with Cygwin is closer to a GNU
+ bash environment such as Linux than to other the other Win32
+ makes.
+
+ Cygwin implements a Posix/Unix runtime system (cygwin1.dll).
+ It is also possible to create Win32 binaries that only use the
+ Microsoft C runtime system (msvcrt.dll or crtdll.dll) using
+ MinGW. MinGW can be used in the Cygwin development environment
+ or in a standalone setup as described in the following section.
+
+ To build OpenSSL using Cygwin:
+
+ * Install Cygwin (see http://cygwin.com/)
+
+ * Install Perl and ensure it is in the path. Both Cygwin perl
+   (5.6.1-2 or newer) and ActivePerl work.
+
+ * Run the Cygwin bash shell
+
+ * $ tar zxvf openssl-x.x.x.tar.gz
+   $ cd openssl-x.x.x
+
+   To build the Cygwin version of OpenSSL:
+
+   $ ./config
+   [...]
+   $ make
+   [...]
+   $ make test
+   $ make install
+
+   This will create a default install in /usr/local/ssl.
+
+   To build the MinGW version (native Windows) in Cygwin:
+
+   $ ./Configure mingw
+   [...]
+   $ make
+   [...]
+   $ make test
+   $ make install
+
+ Cygwin Notes:
+
+ "make test" and normal file operations may fail in directories
+ mounted as text (i.e. mount -t c:\somewhere /home) due to Cygwin
+ stripping of carriage returns. To avoid this ensure that a binary
+ mount is used, e.g. mount -b c:\somewhere /home.
+
+ "bc" is not provided in older Cygwin distribution.  This causes a
+ non-fatal error in "make test" but is otherwise harmless.  If
+ desired and needed, GNU bc can be built with Cygwin without change.
+
+ GNU C (MinGW)
+ -------------
 
  * Compiler installation:
 
-   Mingw32 is available from <ftp://ftp.xraylith.wisc.edu/pub/khan/
+   MinGW is available from http://www.mingw.org. Run the installer and
-   gnu-win32/mingw32/gcc-2.95.2/gcc-2.95.2-msvcrt.exe>. Extract it
+   set the MinGW bin directory to the PATH in "System Properties" or
-   to a directory such as C:\gcc-2.95.2 and add c:\gcc-2.95.2\bin to
+   autoexec.bat.
-   the PATH environment variable in "System Properties"; or edit and
-   run C:\gcc-2.95.2\mingw32.bat to set the PATH.
 
  * Compile OpenSSL:
 
@@ -153,49 +221,6 @@
    > cd out
    > ..\ms\test
 
- GNU C (Cygwin)
- --------------
-
- Cygwin provides a bash shell and GNU tools environment running
- on NT 4.0, Windows 9x, Windows ME, Windows 2000, and Windows XP.
- Consequently, a make of OpenSSL with Cygwin is closer to a GNU
- bash environment such as Linux than to other W32 makes which are
- based on a single makefile approach. Cygwin implements Posix/Unix
- calls through cygwin1.dll, and is contrasted to Mingw32 which links
- dynamically to msvcrt.dll or crtdll.dll.
-
- To build OpenSSL using Cygwin:
-
- * Install Cygwin (see http://cygwin.com/)
-
- * Install Perl and ensure it is in the path (recent Cygwin perl 
-   (version 5.6.1-2 of the latter has been reported to work) or
-   ActivePerl)
-
- * Run the Cygwin bash shell
-
- * $ tar zxvf openssl-x.x.x.tar.gz
-   $ cd openssl-x.x.x
-   $ ./config
-   [...]
-   $ make
-   [...]
-   $ make test
-   $ make install
-
- This will create a default install in /usr/local/ssl.
-
- Cygwin Notes:
-
- "make test" and normal file operations may fail in directories
- mounted as text (i.e. mount -t c:\somewhere /home) due to Cygwin
- stripping of carriage returns. To avoid this ensure that a binary
- mount is used, e.g. mount -b c:\somewhere /home.
-
- "bc" is not provided in older Cygwin distribution.  This causes a
- non-fatal error in "make test" but is otherwise harmless.  If
- desired and needed, GNU bc can be built with Cygwin without change.
-
 
  Installation
  ------------
@@ -215,7 +240,7 @@
 	$ md c:\openssl\lib
 	$ md c:\openssl\include
 	$ md c:\openssl\include\openssl
-	$ copy /b inc32\*               c:\openssl\include\openssl
+	$ copy /b inc32\openssl\*       c:\openssl\include\openssl
 	$ copy /b out32dll\ssleay32.lib c:\openssl\lib
 	$ copy /b out32dll\libeay32.lib c:\openssl\lib
 	$ copy /b out32dll\ssleay32.dll c:\openssl\bin
@@ -276,3 +301,21 @@
  (e.g. fopen()), and OpenSSL cannot change these; so in general you cannot
  rely on CRYPTO_malloc_init() solving your problem, and you should
  consistently use the multithreaded library.
+
+ Linking your application
+ ------------------------
+
+ If you link with static OpenSSL libraries [those built with ms/nt.mak],
+ then you're expected to additionally link your application with
+ WSOCK32.LIB, ADVAPI32.LIB, GDI32.LIB and USER32.LIB. Those developing
+ non-interactive service applications might feel concerned about linking
+ with latter two, as they are justly associated with interactive desktop,
+ which is not available to service processes. The toolkit is designed
+ to detect in which context it's currently executed, GUI, console app
+ or service, and act accordingly, namely whether or not to actually make
+ GUI calls.
+
+ If you link with OpenSSL .DLLs, then you're expected to include into
+ your application code small "shim" snippet, which provides glue between
+ OpenSSL BIO layer and your compiler run-time. Look up OPENSSL_Applink
+ reference page for further details.

INSTALL.W64

@@ -0,0 +1,66 @@
+
+ INSTALLATION ON THE WIN64 PLATFORM
+ ----------------------------------
+
+ Caveat lector
+ -------------
+
+ As of moment of this writing Win64 support is classified "initial"
+ for the following reasons.
+
+ - No assembler modules are engaged upon initial 0.9.8 release.
+ - API might change within 0.9.8 life-span, *but* in a manner which
+   doesn't break backward binary compatibility. Or in other words,
+   application programs compiled with initial 0.9.8 headers will
+   be expected to work with future minor release .DLL without need
+   to re-compile, even if future minor release features modified API.
+ - Above mentioned API modifications have everything to do with
+   elimination of a number of limitations, which are normally
+   considered inherent to 32-bit platforms. Which in turn is why they
+   are treated as limitations on 64-bit platform such as Win64:-)
+   The current list comprises [but not necessarily limited to]:
+
+   - null-terminated strings may not be longer than 2G-1 bytes,
+     longer strings are treated as zero-length;
+   - dynamically and *internally* allocated chunks can't be larger
+     than 2G-1 bytes;
+   - inability to encrypt/decrypt chunks of data larger than 4GB
+     [it's possibly to *hash* chunks of arbitrary size through];
+
+   Neither of these is actually big deal and hardly encountered
+   in real-life applications.
+
+ Compiling procedure
+ -------------------
+
+ You will need Perl. You can run under Cygwin or you can download
+ ActiveState Perl from http://www.activestate.com/ActivePerl.
+
+ You will need Microsoft Platform SDK, available for download at
+ http://www.microsoft.com/msdownload/platformsdk/sdkupdate/. As per
+ April 2005 Platform SDK is equipped with Win64 compilers, as well
+ as assemblers, but it might change in the future.
+
+ To build for Win64/x64:
+
+ > perl Configure VC-WIN64A
+ > ms\do_win64a
+ > nmake -f ms\ntdll.mak
+ > cd out32dll
+ > ..\ms\test
+
+ To build for Win64/IA64:
+
+ > perl Configure VC-WIN64I
+ > ms\do_win64i
+ > nmake -f ms\ntdll.mak
+ > cd out32dll
+ > ..\ms\test
+
+ Naturally test-suite itself has to be executed on the target platform.
+
+ Installation
+ ------------
+
+ TBD, for now see INSTALL.W32.
+

INSTALL.WCE

@@ -11,8 +11,11 @@
  You also need Perl for Win32.  You will need ActiveState Perl, available
  from http://www.activestate.com/ActivePerl.
 
- Windows CE support in OpenSSL relies on wcecompat.  All Windows CE specific
+ Windows CE support in OpenSSL relies on wcecompat and therefore it's
- issues should be directed to www.essemer.com.au.
+ appropriate to check http://www.essemer.com.au/windowsce/ for updates in
+ case of compilation problems. As for the moment of this writing version
+ 1.1 is available and actually required for WCE 4.2 and newer platforms.
+ All Windows CE specific issues should be directed to www.essemer.com.au.
 
  The C Runtime Library implementation for Windows CE that is included with
  Microsoft eMbedded Visual C++ 3.0 is incomplete and in some places

LICENSE

@@ -12,7 +12,7 @@
   ---------------
 
 /* ====================================================================
- * Copyright (c) 1998-2002 The OpenSSL Project.  All rights reserved.
+ * Copyright (c) 1998-2007 The OpenSSL Project.  All rights reserved.
  *
  * Redistribution and use in source and binary forms, with or without
  * modification, are permitted provided that the following conditions

Makefile.shared

@@ -0,0 +1,609 @@
+#
+# Helper makefile to link shared libraries in a portable way.
+# This is much simpler than libtool, and hopefully not too error-prone.
+#
+# The following variables need to be set on the command line to build
+# properly
+
+# CC contains the current compiler.  This one MUST be defined
+CC=cc
+CFLAGS=$(CFLAG)
+# LDFLAGS contains flags to be used when temporary object files (when building
+# shared libraries) are created, or when an application is linked.
+# SHARED_LDFLAGS contains flags to be used when the shared library is created.
+LDFLAGS=
+SHARED_LDFLAGS=
+
+# LIBNAME contains just the name of the library, without prefix ("lib"
+# on Unix, "cyg" for certain forms under Cygwin...) or suffix (.a, .so,
+# .dll, ...).  This one MUST have a value when using this makefile to
+# build shared libraries.
+# For example, to build libfoo.so, you need to do the following:
+#LIBNAME=foo
+LIBNAME=
+
+# APPNAME contains just the name of the application, without suffix (""
+# on Unix, ".exe" on Windows, ...).  This one MUST have a value when using
+# this makefile to build applications.
+# For example, to build foo, you need to do the following:
+#APPNAME=foo
+APPNAME=
+
+# OBJECTS contains all the object files to link together into the application.
+# This must contain at least one object file.
+#OBJECTS=foo.o
+OBJECTS=
+
+# LIBEXTRAS contains extra modules to link together with the library.
+# For example, if a second library, say libbar.a needs to be linked into
+# libfoo.so, you need to do the following:
+#LIBEXTRAS=libbar.a
+# Note that this MUST be used when using the link_o targets, to hold the
+# names of all object files that go into the target library.
+LIBEXTRAS=
+
+# LIBVERSION contains the current version of the library.
+# For example, to build libfoo.so.1.2, you need to do the following:
+#LIBVERSION=1.2
+LIBVERSION=
+
+# LIBCOMPATVERSIONS contains the compatibility versions (a list) of
+# the library.  They MUST be in decreasing order.
+# For example, if libfoo.so.1.2.1 is backward compatible with libfoo.so.1.2
+# and libfoo.so.1, you need to do the following:
+#LIBCOMPATVERSIONS=1.2 1
+# Note that on systems that use sonames, the last number will appear as
+# part of it.
+# It's also possible, for systems that support it (Tru64, for example),
+# to add extra compatibility info with more precision, by adding a second
+# list of versions, separated from the first with a semicolon, like this:
+#LIBCOMPATVERSIONS=1.2 1;1.2.0 1.1.2 1.1.1 1.1.0 1.0.0
+LIBCOMPATVERSIONS=
+
+# LIBDEPS contains all the flags necessary to cover all necessary
+# dependencies to other libraries.
+LIBDEPS=
+
+#------------------------------------------------------------------------------
+# The rest is private to this makefile.
+
+SET_X=:
+#SET_X=set -x
+
+top:
+	echo "Trying to use this makefile interactively?  Don't."
+
+CALC_VERSIONS=	\
+	SHLIB_COMPAT=; SHLIB_SOVER=; \
+	if [ -n "$(LIBVERSION)$(LIBCOMPATVERSIONS)" ]; then \
+		prev=""; \
+		for v in `echo "$(LIBVERSION) $(LIBCOMPATVERSIONS)" | cut -d';' -f1`; do \
+			SHLIB_SOVER_NODOT=$$v; \
+			SHLIB_SOVER=.$$v; \
+			if [ -n "$$prev" ]; then \
+				SHLIB_COMPAT="$$SHLIB_COMPAT .$$prev"; \
+			fi; \
+			prev=$$v; \
+		done; \
+	fi
+
+LINK_APP=	\
+  ( $(SET_X);   \
+    LIBDEPS="$${LIBDEPS:-$(LIBDEPS)}"; \
+    LDCMD="$${LDCMD:-$(CC)}"; LDFLAGS="$${LDFLAGS:-$(CFLAGS)}"; \
+    LIBPATH=`for x in $$LIBDEPS; do if echo $$x | grep '^ *-L' > /dev/null 2>&1; then echo $$x | sed -e 's/^ *-L//'; fi; done | uniq`; \
+    LIBPATH=`echo $$LIBPATH | sed -e 's/ /:/g'`; \
+    LD_LIBRARY_PATH=$$LIBPATH:$$LD_LIBRARY_PATH \
+    $${LDCMD} $${LDFLAGS} -o $${APPNAME:=$(APPNAME)} $(OBJECTS) $${LIBDEPS} )
+
+LINK_SO=	\
+  ( $(SET_X);   \
+    LIBDEPS="$${LIBDEPS:-$(LIBDEPS)}"; \
+    SHAREDCMD="$${SHAREDCMD:-$(CC)}"; \
+    SHAREDFLAGS="$${SHAREDFLAGS:-$(CFLAGS) $(SHARED_LDFLAGS)}"; \
+    LIBPATH=`for x in $$LIBDEPS; do if echo $$x | grep '^ *-L' > /dev/null 2>&1; then echo $$x | sed -e 's/^ *-L//'; fi; done | uniq`; \
+    LIBPATH=`echo $$LIBPATH | sed -e 's/ /:/g'`; \
+    LD_LIBRARY_PATH=$$LIBPATH:$$LD_LIBRARY_PATH \
+    $${SHAREDCMD} $${SHAREDFLAGS} \
+	-o $$SHLIB$$SHLIB_SOVER$$SHLIB_SUFFIX \
+	$$ALLSYMSFLAGS $$SHOBJECTS $$NOALLSYMSFLAGS $$LIBDEPS \
+  ) && $(SYMLINK_SO)
+
+SYMLINK_SO=	\
+	if [ -n "$$INHIBIT_SYMLINKS" ]; then :; else \
+		prev=$$SHLIB$$SHLIB_SOVER$$SHLIB_SUFFIX; \
+		if [ -n "$$SHLIB_COMPAT" ]; then \
+			for x in $$SHLIB_COMPAT; do \
+				( $(SET_X); rm -f $$SHLIB$$x$$SHLIB_SUFFIX; \
+				  ln -s $$prev $$SHLIB$$x$$SHLIB_SUFFIX ); \
+				prev=$$SHLIB$$x$$SHLIB_SUFFIX; \
+			done; \
+		fi; \
+		if [ -n "$$SHLIB_SOVER" ]; then \
+			( $(SET_X); rm -f $$SHLIB$$SHLIB_SUFFIX; \
+			  ln -s $$prev $$SHLIB$$SHLIB_SUFFIX ); \
+		fi; \
+	fi
+
+LINK_SO_A=	SHOBJECTS="lib$(LIBNAME).a $(LIBEXTRAS)"; $(LINK_SO)
+LINK_SO_O=	SHOBJECTS="$(LIBEXTRAS)"; $(LINK_SO)
+
+LINK_SO_A_VIA_O=	\
+  SHOBJECTS=lib$(LIBNAME).o; \
+  ALL=$$ALLSYMSFLAGS; ALLSYMSFLAGS=; NOALLSYMSFLAGS=; \
+  ( $(SET_X); \
+    ld $(LDFLAGS) -r -o lib$(LIBNAME).o $$ALL lib$(LIBNAME).a $(LIBEXTRAS) ); \
+  $(LINK_SO) && rm -f $(LIBNAME).o
+
+LINK_SO_A_UNPACKED=	\
+  UNPACKDIR=link_tmp.$$$$; rm -rf $$UNPACKDIR; mkdir $$UNPACKDIR; \
+  (cd $$UNPACKDIR; ar x ../lib$(LIBNAME).a) && \
+  ([ -z "$(LIBEXTRAS)" ] || cp $(LIBEXTRAS) $$UNPACKDIR) && \
+  SHOBJECTS=$$UNPACKDIR/*.o; \
+  $(LINK_SO) && rm -rf $$UNPACKDIR
+
+DETECT_GNU_LD=(${CC} -Wl,-V /dev/null 2>&1 | grep '^GNU ld' )>/dev/null
+
+DO_GNU_SO=$(CALC_VERSIONS); \
+	SHLIB=lib$(LIBNAME).so; \
+	SHLIB_SUFFIX=; \
+	ALLSYMSFLAGS='-Wl,--whole-archive'; \
+	NOALLSYMSFLAGS='-Wl,--no-whole-archive'; \
+	SHAREDFLAGS="$(CFLAGS) $(SHARED_LDFLAGS) -shared -Wl,-Bsymbolic -Wl,-soname=$$SHLIB$$SHLIB_SOVER$$SHLIB_SUFFIX"
+
+DO_GNU_APP=LDFLAGS="$(CFLAGS) -Wl,-rpath,$(LIBRPATH)"
+
+#This is rather special.  It's a special target with which one can link
+#applications without bothering with any features that have anything to
+#do with shared libraries, for example when linking against static
+#libraries.  It's mostly here to avoid a lot of conditionals everywhere
+#else...
+link_app.:
+	$(LINK_APP)
+
+link_o.gnu:
+	@ $(DO_GNU_SO); $(LINK_SO_O)
+link_a.gnu:
+	@ $(DO_GNU_SO); $(LINK_SO_A)
+link_app.gnu:
+	@ $(DO_GNU_APP); $(LINK_APP)
+
+link_o.bsd:
+	@if ${DETECT_GNU_LD}; then $(DO_GNU_SO); else \
+	$(CALC_VERSIONS); \
+	SHLIB=lib$(LIBNAME).so; \
+	SHLIB_SUFFIX=; \
+	LIBDEPS=" "; \
+	ALLSYMSFLAGS="-Wl,-Bforcearchive"; \
+	NOALLSYMSFLAGS=; \
+	SHAREDFLAGS="$(CFLAGS) $(SHARED_LDFLAGS) -shared -nostdlib"; \
+	fi; $(LINK_SO_O)
+link_a.bsd:
+	@if ${DETECT_GNU_LD}; then $(DO_GNU_SO); else \
+	$(CALC_VERSIONS); \
+	SHLIB=lib$(LIBNAME).so; \
+	SHLIB_SUFFIX=; \
+	LIBDEPS=" "; \
+	ALLSYMSFLAGS="-Wl,-Bforcearchive"; \
+	NOALLSYMSFLAGS=; \
+	SHAREDFLAGS="$(CFLAGS) $(SHARED_LDFLAGS) -shared -nostdlib"; \
+	fi; $(LINK_SO_A)
+link_app.bsd:
+	@if ${DETECT_GNU_LD}; then $(DO_GNU_APP); else \
+	LDFLAGS="$(CFLAGS) -Wl,-rpath,$(LIBPATH)"; \
+	fi; $(LINK_APP)
+
+# For Darwin AKA Mac OS/X (dyld)
+# link_o.darwin produces .so, because we let it use dso_dlfcn module,
+# which has .so extension hard-coded. One can argue that one should
+# develop special dso module for MacOS X. At least manual encourages
+# to use native NSModule(3) API and refers to dlfcn as termporary hack.
+link_o.darwin:
+	@ $(CALC_VERSIONS); \
+	SHLIB=`expr "$$THIS" : '.*/\([^/\.]*\)\.'`; \
+	SHLIB=$${SHLIB:-lib$(LIBNAME)}; \
+	SHLIB_SUFFIX=`expr "$$THIS" : '.*\(\.[^\.]*\)$$'`; \
+	SHLIB_SUFFIX=$${SHLIB_SUFFIX:-.so}; \
+	ALLSYMSFLAGS='-all_load'; \
+	NOALLSYMSFLAGS=''; \
+	SHAREDFLAGS="$(CFLAGS) $(SHARED_LDFLAGS)"; \
+	if [ -n "$(LIBVERSION)" ]; then \
+		SHAREDFLAGS="$$SHAREDFLAGS -current_version $(LIBVERSION)"; \
+	fi; \
+	if [ -n "$$SHLIB_SOVER_NODOT" ]; then \
+		SHAREDFLAGS="$$SHAREDFLAGS -compatibility_version $$SHLIB_SOVER_NODOT"; \
+	fi; \
+	$(LINK_SO_O)
+link_a.darwin:
+	@ $(CALC_VERSIONS); \
+	SHLIB=lib$(LIBNAME); \
+	SHLIB_SUFFIX=.dylib; \
+	ALLSYMSFLAGS='-all_load'; \
+	NOALLSYMSFLAGS=''; \
+	SHAREDFLAGS="$(CFLAGS) $(SHARED_LDFLAGS)"; \
+	if [ -n "$(LIBVERSION)" ]; then \
+		SHAREDFLAGS="$$SHAREDFLAGS -current_version $(LIBVERSION)"; \
+	fi; \
+	if [ -n "$$SHLIB_SOVER_NODOT" ]; then \
+		SHAREDFLAGS="$$SHAREDFLAGS -compatibility_version $$SHLIB_SOVER_NODOT"; \
+	fi; \
+	SHAREDFLAGS="$$SHAREDFLAGS -install_name ${INSTALLTOP}/lib/$$SHLIB${SHLIB_EXT}"; \
+	$(LINK_SO_A)
+link_app.darwin:	# is there run-path on darwin?
+	$(LINK_APP)
+
+link_o.cygwin:
+	@ $(CALC_VERSIONS); \
+	INHIBIT_SYMLINKS=yes; \
+	SHLIB=cyg$(LIBNAME); \
+	base=-Wl,--enable-auto-image-base; \
+	if expr $(PLATFORM) : 'mingw' > /dev/null; then \
+		SHLIB=$(LIBNAME)eay32; base=; \
+	fi; \
+	SHLIB_SUFFIX=.dll; \
+	LIBVERSION="$(LIBVERSION)"; \
+	SHLIB_SOVER=${LIBVERSION:+"-$(LIBVERSION)"}; \
+	ALLSYMSFLAGS='-Wl,--whole-archive'; \
+	NOALLSYMSFLAGS='-Wl,--no-whole-archive'; \
+	SHAREDFLAGS="$(CFLAGS) $(SHARED_LDFLAGS) -shared $$base -Wl,-Bsymbolic -Wl,--out-implib,lib$(LIBNAME).dll.a"; \
+	$(LINK_SO_O)
+link_a.cygwin:
+	@ $(CALC_VERSIONS); \
+	INHIBIT_SYMLINKS=yes; \
+	SHLIB=cyg$(LIBNAME); \
+	base=-Wl,--enable-auto-image-base; \
+	if expr $(PLATFORM) : 'mingw' > /dev/null; then \
+		SHLIB=$(LIBNAME)eay32; \
+		base=;  [ $(LIBNAME) = "crypto" ] && base=-Wl,--image-base,0x63000000; \
+	fi; \
+	SHLIB_SUFFIX=.dll; \
+	SHLIB_SOVER=-$(LIBVERSION); \
+	ALLSYMSFLAGS='-Wl,--whole-archive'; \
+	NOALLSYMSFLAGS='-Wl,--no-whole-archive'; \
+	SHAREDFLAGS="$(CFLAGS) $(SHARED_LDFLAGS) -shared $$base -Wl,-Bsymbolic -Wl,--out-implib,lib$(LIBNAME).dll.a"; \
+	[ -f apps/$$SHLIB$$SHLIB_SUFFIX ] && rm apps/$$SHLIB$$SHLIB_SUFFIX; \
+	[ -f test/$$SHLIB$$SHLIB_SUFFIX ] && rm test/$$SHLIB$$SHLIB_SUFFIX; \
+	$(LINK_SO_A) || exit 1; \
+	cp -p $$SHLIB$$SHLIB_SOVER$$SHLIB_SUFFIX apps/; \
+	cp -p $$SHLIB$$SHLIB_SOVER$$SHLIB_SUFFIX test/
+link_app.cygwin:
+	$(LINK_APP)
+
+link_o.alpha-osf1:
+	@ if ${DETECT_GNU_LD}; then \
+		$(DO_GNU_SO); \
+	else \
+		SHLIB=lib$(LIBNAME).so; \
+		SHLIB_SUFFIX=; \
+		SHLIB_HIST=`echo "$(LIBCOMPATVERSIONS)" | cut -d';' -f2 | sed -e 's/ */:/'`; \
+		if [ -n "$$SHLIB_HIST" ]; then \
+			SHLIB_HIST="$${SHLIB_HIST}:$(LIBVERSION)"; \
+		else \
+			SHLIB_HIST="$(LIBVERSION)"; \
+		fi; \
+		SHLIB_SOVER=; \
+		ALLSYMSFLAGS='-all'; \
+		NOALLSYMSFLAGS='-none'; \
+		SHAREDFLAGS="$(CFLAGS) $(SHARED_LDFLAGS) -shared -Wl,-B,symbolic"; \
+		if [ -n "$$SHLIB_HIST" ]; then \
+			SHAREDFLAGS="$$SHAREDFLAGS -set_version $$SHLIB_HIST"; \
+		fi; \
+	fi; \
+	$(LINK_SO_O)
+link_a.alpha-osf1:
+	@ if ${DETECT_GNU_LD}; then \
+		$(DO_GNU_SO); \
+	else \
+		SHLIB=lib$(LIBNAME).so; \
+		SHLIB_SUFFIX=; \
+		SHLIB_HIST=`echo "$(LIBCOMPATVERSIONS)" | cut -d';' -f2 | sed -e 's/ */:/'`; \
+		if [ -n "$$SHLIB_HIST" ]; then \
+			SHLIB_HIST="$${SHLIB_HIST}:$(LIBVERSION)"; \
+		else \
+			SHLIB_HIST="$(LIBVERSION)"; \
+		fi; \
+		SHLIB_SOVER=; \
+		ALLSYMSFLAGS='-all'; \
+		NOALLSYMSFLAGS='-none'; \
+		SHAREDFLAGS="$(CFLAGS) $(SHARED_LDFLAGS) -shared -Wl,-B,symbolic"; \
+		if [ -n "$$SHLIB_HIST" ]; then \
+			SHAREDFLAGS="$$SHAREDFLAGS -set_version $$SHLIB_HIST"; \
+		fi; \
+	fi; \
+	$(LINK_SO_A)
+link_app.alpha-osf1:
+	@if ${DETECT_GNU_LD}; then \
+		$(DO_GNU_APP); \
+	else \
+		LDFLAGS="$(CFLAGS) -rpath $(LIBRPATH)"; \
+	fi; \
+	$(LINK_APP)
+
+link_o.solaris:
+	@ if ${DETECT_GNU_LD}; then \
+		$(DO_GNU_SO); \
+	else \
+		$(CALC_VERSIONS); \
+		MINUSZ='-z '; \
+		($(CC) -v 2>&1 | grep gcc) > /dev/null && MINUSZ='-Wl,-z,'; \
+		SHLIB=lib$(LIBNAME).so; \
+		SHLIB_SUFFIX=; \
+		ALLSYMSFLAGS="$${MINUSZ}allextract"; \
+		NOALLSYMSFLAGS="$${MINUSZ}defaultextract"; \
+		SHAREDFLAGS="$(CFLAGS) $(SHARED_LDFLAGS) -h $$SHLIB$$SHLIB_SOVER$$SHLIB_SUFFIX -Wl,-Bsymbolic"; \
+	fi; \
+	$(LINK_SO_O)
+link_a.solaris:
+	@ if ${DETECT_GNU_LD}; then \
+		$(DO_GNU_SO); \
+	else \
+		$(CALC_VERSIONS); \
+		MINUSZ='-z '; \
+		(${CC} -v 2>&1 | grep gcc) > /dev/null && MINUSZ='-Wl,-z,'; \
+		SHLIB=lib$(LIBNAME).so; \
+		SHLIB_SUFFIX=;\
+		ALLSYMSFLAGS="$${MINUSZ}allextract"; \
+		NOALLSYMSFLAGS="$${MINUSZ}defaultextract"; \
+		SHAREDFLAGS="$(CFLAGS) $(SHARED_LDFLAGS) -h $$SHLIB$$SHLIB_SOVER$$SHLIB_SUFFIX -Wl,-Bsymbolic"; \
+	fi; \
+	$(LINK_SO_A)
+link_app.solaris:
+	@ if ${DETECT_GNU_LD}; then \
+		$(DO_GNU_APP); \
+	else \
+		LDFLAGS="$(CFLAGS) -R $(LIBRPATH)"; \
+	fi; \
+	$(LINK_APP)
+
+# OpenServer 5 native compilers used
+link_o.svr3:
+	@ if ${DETECT_GNU_LD}; then \
+		$(DO_GNU_SO); \
+	else \
+		$(CALC_VERSIONS); \
+		SHLIB=lib$(LIBNAME).so; \
+		SHLIB_SUFFIX=; \
+		ALLSYMSFLAGS=''; \
+		NOALLSYMSFLAGS=''; \
+		SHAREDFLAGS="$(CFLAGS) -G -h $$SHLIB$$SHLIB_SOVER$$SHLIB_SUFFIX"; \
+	fi; \
+	$(LINK_SO_O)
+link_a.svr3:
+	@ if ${DETECT_GNU_LD}; then \
+		$(DO_GNU_SO); \
+	else \
+		$(CALC_VERSIONS); \
+		SHLIB=lib$(LIBNAME).so; \
+		SHLIB_SUFFIX=; \
+		ALLSYMSFLAGS=''; \
+		NOALLSYMSFLAGS=''; \
+		SHAREDFLAGS="$(CFLAGS) -G -h $$SHLIB$$SHLIB_SOVER$$SHLIB_SUFFIX"; \
+	fi; \
+	$(LINK_SO_A_UNPACKED)
+link_app.svr3:
+	@${DETECT_GNU_LD} && $(DO_GNU_APP); \
+	$(LINK_APP)
+
+# UnixWare 7 and OpenUNIX 8 native compilers used
+link_o.svr5:
+	@ if ${DETECT_GNU_LD}; then \
+		$(DO_GNU_SO); \
+	else \
+		$(CALC_VERSIONS); \
+		SHARE_FLAG='-G'; \
+		($(CC) -v 2>&1 | grep gcc) > /dev/null && SHARE_FLAG='-shared'; \
+		SHLIB=lib$(LIBNAME).so; \
+		SHLIB_SUFFIX=; \
+		ALLSYMSFLAGS=''; \
+		NOALLSYMSFLAGS=''; \
+		SHAREDFLAGS="$(CFLAGS) $${SHARE_FLAG} -h $$SHLIB$$SHLIB_SOVER$$SHLIB_SUFFIX"; \
+	fi; \
+	$(LINK_SO_O)
+link_a.svr5:
+	@ if ${DETECT_GNU_LD}; then \
+		$(DO_GNU_SO); \
+	else \
+		$(CALC_VERSIONS); \
+		SHARE_FLAG='-G'; \
+		(${CC} -v 2>&1 | grep gcc) > /dev/null && SHARE_FLAG='-shared'; \
+		SHLIB=lib$(LIBNAME).so; \
+		SHLIB_SUFFIX=; \
+		ALLSYMSFLAGS=''; \
+		NOALLSYMSFLAGS=''; \
+		SHAREDFLAGS="$(CFLAGS) $${SHARE_FLAG} -h $$SHLIB$$SHLIB_SOVER$$SHLIB_SUFFIX"; \
+	fi; \
+	$(LINK_SO_A_UNPACKED)
+link_app.svr5:
+	@${DETECT_GNU_LD} && $(DO_GNU_APP); \
+	$(LINK_APP)
+
+link_o.irix:
+	@ if ${DETECT_GNU_LD}; then \
+		$(DO_GNU_SO); \
+	else \
+		$(CALC_VERSIONS); \
+		SHLIB=lib$(LIBNAME).so; \
+		SHLIB_SUFFIX=; \
+		MINUSWL=""; \
+		($(CC) -v 2>&1 | grep gcc) > /dev/null && MINUSWL="-Wl,"; \
+		ALLSYMSFLAGS="$${MINUSWL}-all"; \
+		NOALLSYMSFLAGS="$${MINUSWL}-none"; \
+		SHAREDFLAGS="$(CFLAGS) $(SHARED_LDFLAGS) -shared -Wl,-soname,$$SHLIB$$SHLIB_SOVER$$SHLIB_SUFFIX,-B,symbolic"; \
+	fi; \
+	$(LINK_SO_O)
+link_a.irix:
+	@ if ${DETECT_GNU_LD}; then \
+		$(DO_GNU_SO); \
+	else \
+		$(CALC_VERSIONS); \
+		SHLIB=lib$(LIBNAME).so; \
+		SHLIB_SUFFIX=; \
+		MINUSWL=""; \
+		($(CC) -v 2>&1 | grep gcc) > /dev/null && MINUSWL="-Wl,"; \
+		ALLSYMSFLAGS="$${MINUSWL}-all"; \
+		NOALLSYMSFLAGS="$${MINUSWL}-none"; \
+		SHAREDFLAGS="$(CFLAGS) $(SHARED_LDFLAGS) -shared -Wl,-soname,$$SHLIB$$SHLIB_SOVER$$SHLIB_SUFFIX,-B,symbolic"; \
+	fi; \
+	$(LINK_SO_A)
+link_app.irix:
+	@LDFLAGS="$(CFLAGS) -Wl,-rpath,$(LIBRPATH)"; \
+	$(LINK_APP)
+
+# 32-bit PA-RISC HP-UX embeds the -L pathname of libs we link with, so
+# we compensate for it with +cdp ../: and +cdp ./:. Yes, these rewrite
+# rules imply that we can only link one level down in catalog structure,
+# but that's what takes place for the moment of this writing. +cdp option
+# was introduced in HP-UX 11.x and applies in 32-bit PA-RISC link
+# editor context only [it's simply ignored in other cases, which are all
+# ELFs by the way].
+#
+link_o.hpux:
+	@if ${DETECT_GNU_LD}; then $(DO_GNU_SO); else \
+	$(CALC_VERSIONS); \
+	SHLIB=lib$(LIBNAME).sl; \
+	expr "$(CFLAGS)" : '.*DSO_DLFCN' > /dev/null && SHLIB=lib$(LIBNAME).so; \
+	SHLIB_SUFFIX=; \
+	ALLSYMSFLAGS='-Wl,-Fl'; \
+	NOALLSYMSFLAGS=''; \
+	expr $(PLATFORM) : 'hpux64' > /dev/null && ALLSYMSFLAGS='-Wl,+forceload'; \
+	SHAREDFLAGS="$(CFLAGS) $(SHARED_LDFLAGS) -Wl,-B,symbolic,+vnocompatwarnings,-z,+s,+h,$$SHLIB$$SHLIB_SOVER$$SHLIB_SUFFIX,+cdp,../:,+cdp,./:"; \
+	fi; \
+	rm -f $$SHLIB$$SHLIB_SOVER$$SHLIB_SUFFIX || :; \
+	$(LINK_SO_O) && chmod a=rx $$SHLIB$$SHLIB_SOVER$$SHLIB_SUFFIX
+link_a.hpux:
+	@if ${DETECT_GNU_LD}; then $(DO_GNU_SO); else \
+	$(CALC_VERSIONS); \
+	SHLIB=lib$(LIBNAME).sl; \
+	expr $(PLATFORM) : '.*ia64' > /dev/null && SHLIB=lib$(LIBNAME).so; \
+	SHLIB_SUFFIX=; \
+	ALLSYMSFLAGS='-Wl,-Fl'; \
+	NOALLSYMSFLAGS=''; \
+	expr $(PLATFORM) : 'hpux64' > /dev/null && ALLSYMSFLAGS='-Wl,+forceload'; \
+	SHAREDFLAGS="$(CFLAGS) $(SHARED_LDFLAGS) -Wl,-B,symbolic,+vnocompatwarnings,-z,+s,+h,$$SHLIB$$SHLIB_SOVER$$SHLIB_SUFFIX,+cdp,../:,+cdp,./:"; \
+	fi; \
+	rm -f $$SHLIB$$SHLIB_SOVER$$SHLIB_SUFFIX || :; \
+	$(LINK_SO_A) && chmod a=rx $$SHLIB$$SHLIB_SOVER$$SHLIB_SUFFIX
+link_app.hpux:
+	@if ${DETECT_GNU_LD}; then $(DO_GNU_APP); else \
+	LDFLAGS="$(CFLAGS) -Wl,+s,+cdp,../:,+cdp,./:,+b,$(LIBRPATH)"; \
+	fi; \
+	$(LINK_APP)
+
+link_o.aix:
+	@ $(CALC_VERSIONS); \
+	OBJECT_MODE=`expr x$(SHARED_LDFLAGS) : 'x\-[a-z]*\(64\)'` || :; \
+	OBJECT_MODE=$${OBJECT_MODE:-32}; export OBJECT_MODE; \
+	SHLIB=lib$(LIBNAME).so; \
+	SHLIB_SUFFIX=; \
+	ALLSYMSFLAGS=''; \
+	NOALLSYMSFLAGS=''; \
+	SHAREDFLAGS='$(CFLAGS) $(SHARED_LDFLAGS) -Wl,-G,-bexpall,-bnolibpath,-bM:SRE'; \
+	$(LINK_SO_O);
+link_a.aix:
+	@ $(CALC_VERSIONS); \
+	OBJECT_MODE=`expr x$(SHARED_LDFLAGS) : 'x\-[a-z]*\(64\)'` || : ; \
+	OBJECT_MODE=$${OBJECT_MODE:-32}; export OBJECT_MODE; \
+	SHLIB=lib$(LIBNAME).so; \
+	SHLIB_SUFFIX=; \
+	ALLSYMSFLAGS='-bnogc'; \
+	NOALLSYMSFLAGS=''; \
+	SHAREDFLAGS='$(CFLAGS) $(SHARED_LDFLAGS) -Wl,-G,-bexpall,-bnolibpath,-bM:SRE'; \
+	$(LINK_SO_A_VIA_O)
+link_app.aix:
+	LDFLAGS="$(CFLAGS) -Wl,-brtl,-blibpath:$(LIBRPATH):$${LIBPATH:-/usr/lib:/lib}"; \
+	$(LINK_APP)
+
+link_o.reliantunix:
+	@ $(CALC_VERSIONS); \
+	SHLIB=lib$(LIBNAME).so; \
+	SHLIB_SUFFIX=; \
+	ALLSYMSFLAGS=; \
+	NOALLSYMSFLAGS=''; \
+	SHAREDFLAGS='$(CFLAGS) -G'; \
+	$(LINK_SO_O)
+link_a.reliantunix:
+	@ $(CALC_VERSIONS); \
+	SHLIB=lib$(LIBNAME).so; \
+	SHLIB_SUFFIX=; \
+	ALLSYMSFLAGS=; \
+	NOALLSYMSFLAGS=''; \
+	SHAREDFLAGS='$(CFLAGS) -G'; \
+	$(LINK_SO_A_UNPACKED)
+link_app.reliantunix:
+	$(LINK_APP)
+
+# Targets to build symbolic links when needed
+symlink.gnu symlink.solaris symlink.svr3 symlink.svr5 symlink.irix \
+symlink.aix symlink.reliantunix:
+	@ $(CALC_VERSIONS); \
+	SHLIB=lib$(LIBNAME).so; \
+	$(SYMLINK_SO)
+symlink.darwin:
+	@ $(CALC_VERSIONS); \
+	SHLIB=lib$(LIBNAME); \
+	SHLIB_SUFFIX=.dylib; \
+	$(SYMLINK_SO)
+symlink.hpux:
+	@ $(CALC_VERSIONS); \
+	SHLIB=lib$(LIBNAME).sl; \
+	expr $(PLATFORM) : '.*ia64' > /dev/null && SHLIB=lib$(LIBNAME).so; \
+	$(SYMLINK_SO)
+# The following lines means those specific architectures do no symlinks
+symlink.cygwin symlink.alpha-osf1 symlink.tru64 symlink.tru64-rpath:
+
+# Compatibility targets
+link_o.bsd-gcc-shared link_o.linux-shared link_o.gnu-shared: link_o.gnu
+link_a.bsd-gcc-shared link_a.linux-shared link_a.gnu-shared: link_a.gnu
+link_app.bsd-gcc-shared link_app.linux-shared link_app.gnu-shared: link_app.gnu
+symlink.bsd-gcc-shared symlink.bsd-shared symlink.linux-shared symlink.gnu-shared: symlink.gnu
+link_o.bsd-shared: link_o.bsd
+link_a.bsd-shared: link_a.bsd
+link_app.bsd-shared: link_app.bsd
+link_o.darwin-shared: link_o.darwin
+link_a.darwin-shared: link_a.darwin
+link_app.darwin-shared: link_app.darwin
+symlink.darwin-shared: symlink.darwin
+link_o.cygwin-shared: link_o.cygwin
+link_a.cygwin-shared: link_a.cygwin
+link_app.cygwin-shared: link_app.cygwin
+symlink.cygwin-shared: symlink.cygwin
+link_o.alpha-osf1-shared: link_o.alpha-osf1
+link_a.alpha-osf1-shared: link_a.alpha-osf1
+link_app.alpha-osf1-shared: link_app.alpha-osf1
+symlink.alpha-osf1-shared: symlink.alpha-osf1
+link_o.tru64-shared: link_o.tru64
+link_a.tru64-shared: link_a.tru64
+link_app.tru64-shared: link_app.tru64
+symlink.tru64-shared: symlink.tru64
+link_o.tru64-shared-rpath: link_o.tru64-rpath
+link_a.tru64-shared-rpath: link_a.tru64-rpath
+link_app.tru64-shared-rpath: link_app.tru64-rpath
+symlink.tru64-shared-rpath: symlink.tru64-rpath
+link_o.solaris-shared: link_o.solaris
+link_a.solaris-shared: link_a.solaris
+link_app.solaris-shared: link_app.solaris
+symlink.solaris-shared: symlink.solaris
+link_o.svr3-shared: link_o.svr3
+link_a.svr3-shared: link_a.svr3
+link_app.svr3-shared: link_app.svr3
+symlink.svr3-shared: symlink.svr3
+link_o.svr5-shared: link_o.svr5
+link_a.svr5-shared: link_a.svr5
+link_app.svr5-shared: link_app.svr5
+symlink.svr5-shared: symlink.svr5
+link_o.irix-shared: link_o.irix
+link_a.irix-shared: link_a.irix
+link_app.irix-shared: link_app.irix
+symlink.irix-shared: symlink.irix
+link_o.hpux-shared: link_o.hpux
+link_a.hpux-shared: link_a.hpux
+link_app.hpux-shared: link_app.hpux
+symlink.hpux-shared: symlink.hpux
+link_o.aix-shared: link_o.aix
+link_a.aix-shared: link_a.aix
+link_app.aix-shared: link_app.aix
+symlink.aix-shared: symlink.aix
+link_o.reliantunix-shared: link_o.reliantunix
+link_a.reliantunix-shared: link_a.reliantunix
+link_app.reliantunix-shared: link_app.reliantunix
+symlink.reliantunix-shared: symlink.reliantunix

NEWS

@@ -5,6 +5,183 @@
   This file gives a brief overview of the major changes between each OpenSSL
   release. For more details please read the CHANGES file.
 
+  Major changes between OpenSSL 0.9.8d and OpenSSL 0.9.8e:
+
+      o Various ciphersuite selection fixes.
+      o RFC3779 support.
+
+  Major changes between OpenSSL 0.9.8c and OpenSSL 0.9.8d:
+
+      o Introduce limits to prevent malicious key DoS  (CVE-2006-2940)
+      o Fix security issues (CVE-2006-2937, CVE-2006-3737, CVE-2006-4343)
+      o Changes to ciphersuite selection algorithm
+
+  Major changes between OpenSSL 0.9.8b and OpenSSL 0.9.8c:
+
+      o Fix Daniel Bleichenbacher forged signature attack, CVE-2006-4339
+      o New cipher Camellia
+
+  Major changes between OpenSSL 0.9.8a and OpenSSL 0.9.8b:
+
+      o Cipher string fixes.
+      o Fixes for VC++ 2005.
+      o Updated ECC cipher suite support.
+      o New functions EVP_CIPHER_CTX_new() and EVP_CIPHER_CTX_free().
+      o Zlib compression usage fixes.
+      o Built in dynamic engine compilation support on Win32.
+      o Fixes auto dynamic engine loading in Win32.
+
+  Major changes between OpenSSL 0.9.8 and OpenSSL 0.9.8a:
+
+      o Fix potential SSL 2.0 rollback, CVE-2005-2969
+      o Extended Windows CE support
+
+  Major changes between OpenSSL 0.9.7g and OpenSSL 0.9.8:
+
+      o Major work on the BIGNUM library for higher efficiency and to
+        make operations more streamlined and less contradictory.  This
+        is the result of a major audit of the BIGNUM library.
+      o Addition of BIGNUM functions for fields GF(2^m) and NIST
+        curves, to support the Elliptic Crypto functions.
+      o Major work on Elliptic Crypto; ECDH and ECDSA added, including
+        the use through EVP, X509 and ENGINE.
+      o New ASN.1 mini-compiler that's usable through the OpenSSL
+        configuration file.
+      o Added support for ASN.1 indefinite length constructed encoding.
+      o New PKCS#12 'medium level' API to manipulate PKCS#12 files.
+      o Complete rework of shared library construction and linking
+        programs with shared or static libraries, through a separate
+        Makefile.shared.
+      o Rework of the passing of parameters from one Makefile to another.
+      o Changed ENGINE framework to load dynamic engine modules
+        automatically from specifically given directories.
+      o New structure and ASN.1 functions for CertificatePair.
+      o Changed the ZLIB compression method to be stateful.
+      o Changed the key-generation and primality testing "progress"
+        mechanism to take a structure that contains the ticker
+        function and an argument.
+      o New engine module: GMP (performs private key exponentiation).
+      o New engine module: VIA PadLOck ACE extension in VIA C3
+        Nehemiah processors.
+      o Added support for IPv6 addresses in certificate extensions.
+        See RFC 1884, section 2.2.
+      o Added support for certificate policy mappings, policy
+        constraints and name constraints.
+      o Added support for multi-valued AVAs in the OpenSSL
+        configuration file.
+      o Added support for multiple certificates with the same subject
+        in the 'openssl ca' index file.
+      o Make it possible to create self-signed certificates using
+        'openssl ca -selfsign'.
+      o Make it possible to generate a serial number file with
+        'openssl ca -create_serial'.
+      o New binary search functions with extended functionality.
+      o New BUF functions.
+      o New STORE structure and library to provide an interface to all
+        sorts of data repositories.  Supports storage of public and
+        private keys, certificates, CRLs, numbers and arbitrary blobs.
+	This library is unfortunately unfinished and unused withing
+	OpenSSL.
+      o New control functions for the error stack.
+      o Changed the PKCS#7 library to support one-pass S/MIME
+        processing.
+      o Added the possibility to compile without old deprecated
+        functionality with the OPENSSL_NO_DEPRECATED macro or the
+        'no-deprecated' argument to the config and Configure scripts.
+      o Constification of all ASN.1 conversion functions, and other
+        affected functions.
+      o Improved platform support for PowerPC.
+      o New FIPS 180-2 algorithms (SHA-224, -256, -384 and -512).
+      o New X509_VERIFY_PARAM structure to support parametrisation
+        of X.509 path validation.
+      o Major overhaul of RC4 performance on Intel P4, IA-64 and
+        AMD64.
+      o Changed the Configure script to have some algorithms disabled
+        by default.  Those can be explicitely enabled with the new
+        argument form 'enable-xxx'.
+      o Change the default digest in 'openssl' commands from MD5 to
+        SHA-1.
+      o Added support for DTLS.
+      o New BIGNUM blinding.
+      o Added support for the RSA-PSS encryption scheme
+      o Added support for the RSA X.931 padding.
+      o Added support for BSD sockets on NetWare.
+      o Added support for files larger than 2GB.
+      o Added initial support for Win64.
+      o Added alternate pkg-config files.
+
+  Major changes between OpenSSL 0.9.7k and OpenSSL 0.9.7l:
+
+      o Introduce limits to prevent malicious key DoS  (CVE-2006-2940)
+      o Fix security issues (CVE-2006-2937, CVE-2006-3737, CVE-2006-4343)
+
+  Major changes between OpenSSL 0.9.7j and OpenSSL 0.9.7k:
+
+      o Fix Daniel Bleichenbacher forged signature attack, CVE-2006-4339
+
+  Major changes between OpenSSL 0.9.7i and OpenSSL 0.9.7j:
+
+      o Visual C++ 2005 fixes.
+      o Update Windows build system for FIPS.
+
+  Major changes between OpenSSL 0.9.7h and OpenSSL 0.9.7i:
+
+      o Give EVP_MAX_MD_SIZE it's old value, except for a FIPS build.
+
+  Major changes between OpenSSL 0.9.7g and OpenSSL 0.9.7h:
+
+      o Fix SSL 2.0 Rollback, CVE-2005-2969
+      o Allow use of fixed-length exponent on DSA signing
+      o Default fixed-window RSA, DSA, DH private-key operations
+
+  Major changes between OpenSSL 0.9.7f and OpenSSL 0.9.7g:
+
+      o More compilation issues fixed.
+      o Adaptation to more modern Kerberos API.
+      o Enhanced or corrected configuration for Solaris64, Mingw and Cygwin.
+      o Enhanced x86_64 assembler BIGNUM module.
+      o More constification.
+      o Added processing of proxy certificates (RFC 3820).
+
+  Major changes between OpenSSL 0.9.7e and OpenSSL 0.9.7f:
+
+      o Several compilation issues fixed.
+      o Many memory allocation failure checks added.
+      o Improved comparison of X509 Name type.
+      o Mandatory basic checks on certificates.
+      o Performance improvements.
+
+  Major changes between OpenSSL 0.9.7d and OpenSSL 0.9.7e:
+
+      o Fix race condition in CRL checking code.
+      o Fixes to PKCS#7 (S/MIME) code.
+
+  Major changes between OpenSSL 0.9.7c and OpenSSL 0.9.7d:
+
+      o Security: Fix Kerberos ciphersuite SSL/TLS handshaking bug
+      o Security: Fix null-pointer assignment in do_change_cipher_spec()
+      o Allow multiple active certificates with same subject in CA index
+      o Multiple X509 verification fixes
+      o Speed up HMAC and other operations
+
+  Major changes between OpenSSL 0.9.7b and OpenSSL 0.9.7c:
+
+      o Security: fix various ASN1 parsing bugs.
+      o New -ignore_err option to OCSP utility.
+      o Various interop and bug fixes in S/MIME code.
+      o SSL/TLS protocol fix for unrequested client certificates.
+
+  Major changes between OpenSSL 0.9.7a and OpenSSL 0.9.7b:
+
+      o Security: counter the Klima-Pokorny-Rosa extension of
+        Bleichbacher's attack 
+      o Security: make RSA blinding default.
+      o Configuration: Irix fixes, AIX fixes, better mingw support.
+      o Support for new platforms: linux-ia64-ecc.
+      o Build: shared library support fixes.
+      o ASN.1: treat domainComponent correctly.
+      o Documentation: fixes and additions.
+
   Major changes between OpenSSL 0.9.7 and OpenSSL 0.9.7a:
 
       o Security: Important security related bugfixes.
@@ -62,6 +239,18 @@
       o SSL/TLS: add callback to retrieve SSL/TLS messages.
       o SSL/TLS: support AES cipher suites (RFC3268).
 
+  Major changes between OpenSSL 0.9.6j and OpenSSL 0.9.6k:
+
+      o Security: fix various ASN1 parsing bugs.
+      o SSL/TLS protocol fix for unrequested client certificates.
+
+  Major changes between OpenSSL 0.9.6i and OpenSSL 0.9.6j:
+
+      o Security: counter the Klima-Pokorny-Rosa extension of
+        Bleichbacher's attack 
+      o Security: make RSA blinding default.
+      o Build: shared library support fixes.
+
   Major changes between OpenSSL 0.9.6h and OpenSSL 0.9.6i:
 
       o Important security related bugfixes.

Netware/build.bat

@@ -0,0 +1,228 @@
+@echo off
+
+rem ========================================================================
+rem   Batch file to automate building OpenSSL for NetWare.
+rem
+rem   usage:
+rem      build [target] [debug opts] [assembly opts] [configure opts]
+rem
+rem      target        - "netware-clib" - CLib NetWare build (WinSock Sockets)
+rem                    - "netware-clib-bsdsock" - CLib NetWare build (BSD Sockets)
+rem                    - "netware-libc" - LibC NetWare build (WinSock Sockets)
+rem                    - "netware-libc-bsdsock" - LibC NetWare build (BSD Sockets)
+rem 
+rem      debug opts    - "debug"  - build debug
+rem
+rem      assembly opts - "nw-mwasm" - use Metrowerks assembler
+rem                    - "nw-nasm"  - use NASM assembler
+rem                    - "no-asm"   - don't use assembly
+rem
+rem      configure opts- all unrecognized arguments are passed to the
+rem                       perl configure script
+rem
+rem   If no arguments are specified the default is to build non-debug with
+rem   no assembly.  NOTE: there is no default BLD_TARGET.
+rem
+
+
+
+rem   No assembly is the default - Uncomment section below to change
+rem   the assembler default
+set ASM_MODE=
+set ASSEMBLER=
+set NO_ASM=no-asm
+
+rem   Uncomment to default to the Metrowerks assembler
+rem set ASM_MODE=nw-mwasm
+rem set ASSEMBLER=Metrowerks
+rem set NO_ASM=
+
+rem   Uncomment to default to the NASM assembler
+rem set ASM_MODE=nw-nasm
+rem set ASSEMBLER=NASM
+rem set NO_ASM=
+
+rem   No default Bld target
+set BLD_TARGET=no_target
+rem set BLD_TARGET=netware-clib
+rem set BLD_TARGET=netware-libc
+
+
+rem   Default to build non-debug
+set DEBUG=
+                                    
+rem   Uncomment to default to debug build
+rem set DEBUG=debug
+
+
+set CONFIG_OPTS=
+set ARG_PROCESSED=NO
+
+
+rem   Process command line args
+:opts
+if "a%1" == "a" goto endopt
+if "%1" == "no-asm"   set NO_ASM=no-asm
+if "%1" == "no-asm"   set ARG_PROCESSED=YES
+if "%1" == "debug"    set DEBUG=debug
+if "%1" == "debug"    set ARG_PROCESSED=YES
+if "%1" == "nw-nasm"  set ASM_MODE=nw-nasm
+if "%1" == "nw-nasm"  set ASSEMBLER=NASM
+if "%1" == "nw-nasm"  set NO_ASM=
+if "%1" == "nw-nasm"  set ARG_PROCESSED=YES
+if "%1" == "nw-mwasm" set ASM_MODE=nw-mwasm
+if "%1" == "nw-mwasm" set ASSEMBLER=Metrowerks
+if "%1" == "nw-mwasm" set NO_ASM=
+if "%1" == "nw-mwasm" set ARG_PROCESSED=YES
+if "%1" == "netware-clib" set BLD_TARGET=netware-clib
+if "%1" == "netware-clib" set ARG_PROCESSED=YES
+if "%1" == "netware-clib-bsdsock" set BLD_TARGET=netware-clib-bsdsock
+if "%1" == "netware-clib-bsdsock" set ARG_PROCESSED=YES
+if "%1" == "netware-libc" set BLD_TARGET=netware-libc
+if "%1" == "netware-libc" set ARG_PROCESSED=YES
+if "%1" == "netware-libc-bsdsock" set BLD_TARGET=netware-libc-bsdsock
+if "%1" == "netware-libc-bsdsock" set ARG_PROCESSED=YES
+
+rem   If we didn't recognize the argument, consider it an option for config
+if "%ARG_PROCESSED%" == "NO" set CONFIG_OPTS=%CONFIG_OPTS% %1
+if "%ARG_PROCESSED%" == "YES" set ARG_PROCESSED=NO
+
+shift
+goto opts
+:endopt
+
+rem make sure a valid BLD_TARGET was specified
+if "%BLD_TARGET%" == "no_target" goto no_target
+
+rem build the nlm make file name which includes target and debug info
+set NLM_MAKE=
+if "%BLD_TARGET%" == "netware-clib" set NLM_MAKE=netware\nlm_clib
+if "%BLD_TARGET%" == "netware-clib-bsdsock" set NLM_MAKE=netware\nlm_clib_bsdsock
+if "%BLD_TARGET%" == "netware-libc" set NLM_MAKE=netware\nlm_libc
+if "%BLD_TARGET%" == "netware-libc-bsdsock" set NLM_MAKE=netware\nlm_libc_bsdsock
+if "%DEBUG%" == "" set NLM_MAKE=%NLM_MAKE%.mak
+if "%DEBUG%" == "debug" set NLM_MAKE=%NLM_MAKE%_dbg.mak
+
+if "%NO_ASM%" == "no-asm" set ASM_MODE=
+if "%NO_ASM%" == "no-asm" set ASSEMBLER=
+if "%NO_ASM%" == "no-asm" set CONFIG_OPTS=%CONFIG_OPTS% no-asm
+if "%NO_ASM%" == "no-asm" goto do_config
+
+
+rem ==================================================
+echo Generating x86 for %ASSEMBLER% assembler
+
+echo Bignum
+cd crypto\bn\asm
+rem perl x86.pl %ASM_MODE% > bn-nw.asm
+perl bn-586.pl %ASM_MODE% > bn-nw.asm
+perl co-586.pl %ASM_MODE% > co-nw.asm
+cd ..\..\..
+
+echo AES
+cd crypto\aes\asm
+perl aes-586.pl %ASM_MODE% > a-nw.asm
+cd ..\..\..
+
+echo DES
+cd crypto\des\asm
+perl des-586.pl %ASM_MODE% > d-nw.asm
+cd ..\..\..
+
+echo "crypt(3)"
+
+cd crypto\des\asm
+perl crypt586.pl %ASM_MODE% > y-nw.asm
+cd ..\..\..
+
+echo Blowfish
+
+cd crypto\bf\asm
+perl bf-586.pl %ASM_MODE% > b-nw.asm
+cd ..\..\..
+
+echo CAST5
+cd crypto\cast\asm
+perl cast-586.pl %ASM_MODE% > c-nw.asm
+cd ..\..\..
+
+echo RC4
+cd crypto\rc4\asm
+perl rc4-586.pl %ASM_MODE% > r4-nw.asm
+cd ..\..\..
+
+echo MD5
+cd crypto\md5\asm
+perl md5-586.pl %ASM_MODE% > m5-nw.asm
+cd ..\..\..
+
+echo SHA1
+cd crypto\sha\asm
+perl sha1-586.pl %ASM_MODE% > s1-nw.asm
+cd ..\..\..
+
+echo RIPEMD160
+cd crypto\ripemd\asm
+perl rmd-586.pl %ASM_MODE% > rm-nw.asm
+cd ..\..\..
+
+echo RC5\32
+cd crypto\rc5\asm
+perl rc5-586.pl %ASM_MODE% > r5-nw.asm
+cd ..\..\..
+
+echo CPUID
+cd crypto
+perl x86cpuid.pl %ASM_MODE% > x86cpuid-nw.asm
+cd ..\
+
+rem ===============================================================
+rem
+:do_config
+
+echo .
+echo configure options: %CONFIG_OPTS% %BLD_TARGET%
+echo .
+perl configure %CONFIG_OPTS% %BLD_TARGET%
+
+perl util\mkfiles.pl >MINFO
+
+echo .
+echo mk1mf.pl options: %DEBUG% %ASM_MODE% %CONFIG_OPTS% %BLD_TARGET%
+echo .
+perl util\mk1mf.pl %DEBUG% %ASM_MODE% %CONFIG_OPTS% %BLD_TARGET% >%NLM_MAKE%
+
+make -f %NLM_MAKE% vclean
+echo .
+echo The makefile "%NLM_MAKE%" has been created use your maketool to
+echo build (ex: make -f %NLM_MAKE%)
+goto end
+
+rem ===============================================================
+rem
+:no_target
+echo .
+echo .  No build target specified!!!
+echo .
+echo .  usage: build [target] [debug opts] [assembly opts] [configure opts]
+echo .
+echo .     target        - "netware-clib" - CLib NetWare build (WinSock Sockets)
+echo .                   - "netware-clib-bsdsock" - CLib NetWare build (BSD Sockets)
+echo .                   - "netware-libc" - LibC NetWare build (WinSock Sockets)
+echo .                   - "netware-libc-bsdsock" - LibC NetWare build (BSD Sockets)
+echo .
+echo .     debug opts    - "debug"  - build debug
+echo .
+echo .     assembly opts - "nw-mwasm" - use Metrowerks assembler
+echo .                     "nw-nasm"  - use NASM assembler
+echo .                     "no-asm"   - don't use assembly
+echo .
+echo .     configure opts- all unrecognized arguments are passed to the
+echo .                      perl configure script
+echo .
+echo .  If no debug or assembly opts are specified the default is to build
+echo .  non-debug without assembly
+echo .
+
+        
+:end        

Netware/cpy_tests.bat

@@ -0,0 +1,113 @@
+@echo off
+
+rem   Batch file to copy OpenSSL stuff to a NetWare server for testing
+
+rem   This batch file will create an "opensssl" directory at the root of the
+rem   specified NetWare drive and copy the required files to run the tests.
+rem   It should be run from inside the "openssl\netware" subdirectory.
+
+rem   Usage:
+rem      cpy_tests.bat <test subdirectory> <NetWare drive>
+rem          <test subdirectory> - out_nw.dbg | out_nw
+rem          <NetWare drive> - any mapped drive letter
+rem
+rem      example ( copy from debug build to m: dirve ):
+rem              cpy_tests.bat out_nw.dbg m:
+rem
+rem      CAUTION:  If a directory named OpenSSL exists on the target drive
+rem                it will be deleted first.
+
+
+if "%1" == "" goto usage
+if "%2" == "" goto usage
+
+rem   Assume running in \openssl directory unless cpy_tests.bat exists then
+rem   it must be the \openssl\netware directory
+set loc=.
+if exist cpy_tests.bat set loc=..
+
+rem   make sure the local build subdirectory specified is valid
+if not exist %loc%\%1\NUL goto invalid_dir
+
+rem   make sure target drive is valid
+if not exist %2\NUL goto invalid_drive
+
+rem   If an OpenSSL directory exists on the target drive, remove it
+if exist %2\openssl\NUL goto remove_openssl
+goto do_copy
+
+:remove_openssl
+echo .
+echo OpenSSL directory exists on %2 - it will be removed!
+pause
+rmdir %2\openssl /s /q
+
+:do_copy
+rem   make an "openssl" directory and others at the root of the NetWare drive
+mkdir %2\openssl
+mkdir %2\openssl\test_out
+mkdir %2\openssl\apps
+mkdir %2\openssl\certs
+mkdir %2\openssl\test
+
+
+rem   copy the test nlms
+copy %loc%\%1\*.nlm %2\openssl\
+
+rem   copy the test perl script
+copy %loc%\netware\do_tests.pl %2\openssl\
+
+rem   copy the certs directory stuff
+xcopy %loc%\certs\*.*         %2\openssl\certs\ /s
+
+rem   copy the test directory stuff
+copy %loc%\test\CAss.cnf      %2\openssl\test\
+copy %loc%\test\Uss.cnf       %2\openssl\test\
+copy %loc%\test\pkcs7.pem     %2\openssl\test\
+copy %loc%\test\pkcs7-1.pem   %2\openssl\test\
+copy %loc%\test\testcrl.pem   %2\openssl\test\
+copy %loc%\test\testp7.pem    %2\openssl\test\
+copy %loc%\test\testreq2.pem  %2\openssl\test\
+copy %loc%\test\testrsa.pem   %2\openssl\test\
+copy %loc%\test\testsid.pem   %2\openssl\test\
+copy %loc%\test\testx509.pem  %2\openssl\test\
+copy %loc%\test\v3-cert1.pem  %2\openssl\test\
+copy %loc%\test\v3-cert2.pem  %2\openssl\test\
+copy %loc%\crypto\evp\evptests.txt %2\openssl\test\
+
+rem   copy the apps directory stuff
+copy %loc%\apps\client.pem    %2\openssl\apps\
+copy %loc%\apps\server.pem    %2\openssl\apps\
+copy %loc%\apps\openssl.cnf   %2\openssl\apps\
+
+echo .
+echo Tests copied
+echo Run the test script at the console by typing:
+echo     "Perl \openssl\do_tests.pl"
+echo .
+echo Make sure the Search path includes the OpenSSL subdirectory
+
+goto end
+
+:invalid_dir
+echo.
+echo Invalid build directory specified: %1
+echo.
+goto usage
+
+:invalid_drive
+echo.
+echo Invalid drive: %2
+echo.
+goto usage
+
+:usage
+echo.
+echo usage: cpy_tests.bat [test subdirectory] [NetWare drive]
+echo     [test subdirectory] - out_nw_clib.dbg, out_nw_libc.dbg, etc. 
+echo     [NetWare drive]     - any mapped drive letter
+echo.
+echo example: cpy_test out_nw_clib.dbg M:
+echo  (copy from clib debug build area to M: drive)
+
+:end

Netware/do_tests.pl

@@ -0,0 +1,624 @@
+# perl script to run OpenSSL tests
+
+
+my $base_path      = "\\openssl";
+
+my $output_path    = "$base_path\\test_out";
+my $cert_path      = "$base_path\\certs";
+my $test_path      = "$base_path\\test";
+my $app_path       = "$base_path\\apps";
+
+my $tmp_cert       = "$output_path\\cert.tmp";
+my $OpenSSL_config = "$app_path\\openssl.cnf";
+my $log_file       = "$output_path\\tests.log";
+
+my $pause = 0;
+
+
+#  process the command line args to see if they wanted us to pause
+#  between executing each command
+foreach $i (@ARGV)
+{
+   if ($i =~ /^-p$/)
+   { $pause=1; }
+}
+
+
+
+main();
+
+
+############################################################################
+sub main()
+{
+   # delete all the output files in the output directory
+   unlink <$output_path\\*.*>;
+
+   # open the main log file
+   open(OUT, ">$log_file") || die "unable to open $log_file\n";
+
+   print( OUT "========================================================\n");
+   my $outFile = "$output_path\\version.out";
+   system("openssl2 version (CLIB_OPT)/>$outFile");
+   log_output("CHECKING FOR OPENSSL VERSION:", $outFile);
+
+   algorithm_tests();
+   encryption_tests();
+   evp_tests();
+   pem_tests();
+   verify_tests();
+   ca_tests();
+   ssl_tests();
+
+   close(OUT);
+
+   print("\nCompleted running tests.\n\n");
+   print("Check log file for errors: $log_file\n");
+}
+
+############################################################################
+sub algorithm_tests
+{
+   my $i;
+   my $outFile;
+   my @tests = ( rsa_test, destest, ideatest, bftest, bntest, shatest, sha1test,
+                 sha256t, sha512t, dsatest, md2test, md4test, md5test, mdc2test,
+                 rc2test, rc4test, rc5test, randtest, rmdtest, dhtest, ecdhtest,
+                 ecdsatest, ectest, exptest, casttest, hmactest );
+
+   print( "\nRUNNING CRYPTO ALGORITHM TESTS:\n\n");
+
+   print( OUT "\n========================================================\n");
+   print( OUT "CRYPTO ALGORITHM TESTS:\n\n");
+
+   foreach $i (@tests)
+   {
+      if (-e "$base_path\\$i.nlm")
+      {
+         $outFile = "$output_path\\$i.out";
+         system("$i (CLIB_OPT)/>$outFile");
+         log_desc("Test: $i\.nlm:");
+         log_output("", $outFile );
+      }
+      else
+      {
+         log_desc("Test: $i\.nlm: file not found");
+      }
+   }
+}
+
+############################################################################
+sub encryption_tests
+{
+   my $i;
+   my $outFile;
+   my @enc_tests = ( "enc", "rc4", "des-cfb", "des-ede-cfb", "des-ede3-cfb",
+                     "des-ofb", "des-ede-ofb", "des-ede3-ofb",
+                     "des-ecb", "des-ede", "des-ede3", "des-cbc",
+                     "des-ede-cbc", "des-ede3-cbc", "idea-ecb", "idea-cfb",
+                     "idea-ofb", "idea-cbc", "rc2-ecb", "rc2-cfb",
+                     "rc2-ofb", "rc2-cbc", "bf-ecb", "bf-cfb",
+                     "bf-ofb", "bf-cbc" );
+
+   my $input = "$base_path\\do_tests.pl";
+   my $cipher = "$output_path\\cipher.out";
+   my $clear = "$output_path\\clear.out";
+
+   print( "\nRUNNING ENCRYPTION & DECRYPTION TESTS:\n\n");
+
+   print( OUT "\n========================================================\n");
+   print( OUT "FILE ENCRYPTION & DECRYPTION TESTS:\n\n");
+
+   foreach $i (@enc_tests)
+   {
+      log_desc("Testing: $i");
+
+      # do encryption
+      $outFile = "$output_path\\enc.out";
+      system("openssl2 $i -e -bufsize 113 -k test -in $input -out $cipher (CLIB_OPT)/>$outFile" );
+      log_output("Encrypting: $input --> $cipher", $outFile);
+
+      # do decryption
+      $outFile = "$output_path\\dec.out";
+      system("openssl2 $i -d -bufsize 157 -k test -in $cipher -out $clear (CLIB_OPT)/>$outFile");
+      log_output("Decrypting: $cipher --> $clear", $outFile);
+
+      # compare files
+      $x = compare_files( $input, $clear, 1);
+      if ( $x == 0 )
+      {
+         print( "\rSUCCESS - files match: $input, $clear\n");
+         print( OUT "SUCCESS - files match: $input, $clear\n");
+      }
+      else
+      {
+         print( "\rERROR: files don't match\n");
+         print( OUT "ERROR: files don't match\n");
+      }
+
+      do_wait();
+
+      # Now do the same encryption but use Base64
+
+      # do encryption B64
+      $outFile = "$output_path\\B64enc.out";
+      system("openssl2 $i -a -e -bufsize 113 -k test -in $input -out $cipher (CLIB_OPT)/>$outFile");
+      log_output("Encrypting(B64): $cipher --> $clear", $outFile);
+
+      # do decryption B64
+      $outFile = "$output_path\\B64dec.out";
+      system("openssl2 $i -a -d -bufsize 157 -k test -in $cipher -out $clear (CLIB_OPT)/>$outFile");
+      log_output("Decrypting(B64): $cipher --> $clear", $outFile);
+
+      # compare files
+      $x = compare_files( $input, $clear, 1);
+      if ( $x == 0 )
+      {
+         print( "\rSUCCESS - files match: $input, $clear\n");
+         print( OUT "SUCCESS - files match: $input, $clear\n");
+      }
+      else
+      {
+         print( "\rERROR: files don't match\n");
+         print( OUT "ERROR: files don't match\n");
+      }
+
+      do_wait();
+
+   } # end foreach
+
+   # delete the temporary files
+   unlink($cipher);
+   unlink($clear);
+}
+
+
+############################################################################
+sub pem_tests
+{
+   my $i;
+   my $tmp_out;
+   my $outFile = "$output_path\\pem.out";
+
+   my %pem_tests = (
+         "crl"      => "testcrl.pem",
+          "pkcs7"   => "testp7.pem",
+          "req"     => "testreq2.pem",
+          "rsa"     => "testrsa.pem",
+          "x509"    => "testx509.pem",
+          "x509"    => "v3-cert1.pem",
+          "sess_id" => "testsid.pem"  );
+
+
+   print( "\nRUNNING PEM TESTS:\n\n");
+
+   print( OUT "\n========================================================\n");
+   print( OUT "PEM TESTS:\n\n");
+
+   foreach $i (keys(%pem_tests))
+   {
+      log_desc( "Testing: $i");
+
+      my $input = "$test_path\\$pem_tests{$i}";
+
+      $tmp_out = "$output_path\\$pem_tests{$i}";
+
+      if ($i ne "req" )
+      {
+         system("openssl2 $i -in $input -out $tmp_out (CLIB_OPT)/>$outFile");
+         log_output( "openssl2 $i -in $input -out $tmp_out", $outFile);
+      }
+      else
+      {
+         system("openssl2 $i -in $input -out $tmp_out -config $OpenSSL_config (CLIB_OPT)/>$outFile");
+         log_output( "openssl2 $i -in $input -out $tmp_out -config $OpenSSL_config", $outFile );
+      }
+
+      $x = compare_files( $input, $tmp_out);
+      if ( $x == 0 )
+      {
+         print( "\rSUCCESS - files match: $input, $tmp_out\n");
+         print( OUT "SUCCESS - files match: $input, $tmp_out\n");
+      }
+      else
+      {
+         print( "\rERROR: files don't match\n");
+         print( OUT "ERROR: files don't match\n");
+      }
+      do_wait();
+
+   } # end foreach
+}
+
+
+############################################################################
+sub verify_tests
+{
+   my $i;
+   my $outFile = "$output_path\\verify.out";
+
+   $cert_path =~ s/\\/\//g;
+   my @cert_files = <$cert_path/*.pem>;
+
+   print( "\nRUNNING VERIFY TESTS:\n\n");
+
+   print( OUT "\n========================================================\n");
+   print( OUT "VERIFY TESTS:\n\n");
+
+   make_tmp_cert_file();
+
+   foreach $i (@cert_files)
+   {
+      system("openssl2 verify -CAfile $tmp_cert $i (CLIB_OPT)/>$outFile");
+      log_desc("Verifying cert: $i");
+      log_output("openssl2 verify -CAfile $tmp_cert $i", $outFile);
+   }
+}
+
+
+############################################################################
+sub ssl_tests
+{
+   my $outFile = "$output_path\\ssl_tst.out";
+   my($CAcert) = "$output_path\\certCA.ss";
+   my($Ukey)   = "$output_path\\keyU.ss";
+   my($Ucert)  = "$output_path\\certU.ss";
+   my($ssltest)= "ssltest -key $Ukey -cert $Ucert -c_key $Ukey -c_cert $Ucert -CAfile $CAcert";
+
+   print( "\nRUNNING SSL TESTS:\n\n");
+
+   print( OUT "\n========================================================\n");
+   print( OUT "SSL TESTS:\n\n");
+
+   system("ssltest -ssl2 (CLIB_OPT)/>$outFile");
+   log_desc("Testing sslv2:");
+   log_output("ssltest -ssl2", $outFile);
+
+   system("$ssltest -ssl2 -server_auth (CLIB_OPT)/>$outFile");
+   log_desc("Testing sslv2 with server authentication:");
+   log_output("$ssltest -ssl2 -server_auth", $outFile);
+
+   system("$ssltest -ssl2 -client_auth (CLIB_OPT)/>$outFile");
+   log_desc("Testing sslv2 with client authentication:");
+   log_output("$ssltest -ssl2 -client_auth", $outFile);
+
+   system("$ssltest -ssl2 -server_auth -client_auth (CLIB_OPT)/>$outFile");
+   log_desc("Testing sslv2 with both client and server authentication:");
+   log_output("$ssltest -ssl2 -server_auth -client_auth", $outFile);
+
+   system("ssltest -ssl3 (CLIB_OPT)/>$outFile");
+   log_desc("Testing sslv3:");
+   log_output("ssltest -ssl3", $outFile);
+
+   system("$ssltest -ssl3 -server_auth (CLIB_OPT)/>$outFile");
+   log_desc("Testing sslv3 with server authentication:");
+   log_output("$ssltest -ssl3 -server_auth", $outFile);
+
+   system("$ssltest -ssl3 -client_auth (CLIB_OPT)/>$outFile");
+   log_desc("Testing sslv3 with client authentication:");
+   log_output("$ssltest -ssl3 -client_auth", $outFile);
+
+   system("$ssltest -ssl3 -server_auth -client_auth (CLIB_OPT)/>$outFile");
+   log_desc("Testing sslv3 with both client and server authentication:");
+   log_output("$ssltest -ssl3 -server_auth -client_auth", $outFile);
+
+   system("ssltest (CLIB_OPT)/>$outFile");
+   log_desc("Testing sslv2/sslv3:");
+   log_output("ssltest", $outFile);
+
+   system("$ssltest -server_auth (CLIB_OPT)/>$outFile");
+   log_desc("Testing sslv2/sslv3 with server authentication:");
+   log_output("$ssltest -server_auth", $outFile);
+
+   system("$ssltest -client_auth (CLIB_OPT)/>$outFile");
+   log_desc("Testing sslv2/sslv3 with client authentication:");
+   log_output("$ssltest -client_auth ", $outFile);
+
+   system("$ssltest -server_auth -client_auth (CLIB_OPT)/>$outFile");
+   log_desc("Testing sslv2/sslv3 with both client and server authentication:");
+   log_output("$ssltest -server_auth -client_auth", $outFile);
+
+   system("ssltest -bio_pair -ssl2 (CLIB_OPT)/>$outFile");
+   log_desc("Testing sslv2 via BIO pair:");
+   log_output("ssltest -bio_pair -ssl2", $outFile);
+
+   system("ssltest -bio_pair -dhe1024dsa -v (CLIB_OPT)/>$outFile");
+   log_desc("Testing sslv2/sslv3 with 1024 bit DHE via BIO pair:");
+   log_output("ssltest -bio_pair -dhe1024dsa -v", $outFile);
+
+   system("$ssltest -bio_pair -ssl2 -server_auth (CLIB_OPT)/>$outFile");
+   log_desc("Testing sslv2 with server authentication via BIO pair:");
+   log_output("$ssltest -bio_pair -ssl2 -server_auth", $outFile);
+
+   system("$ssltest -bio_pair -ssl2 -client_auth (CLIB_OPT)/>$outFile");
+   log_desc("Testing sslv2 with client authentication via BIO pair:");
+   log_output("$ssltest -bio_pair -ssl2 -client_auth", $outFile);
+
+   system("$ssltest -bio_pair -ssl2 -server_auth -client_auth (CLIB_OPT)/>$outFile");
+   log_desc("Testing sslv2 with both client and server authentication via BIO pair:");
+   log_output("$ssltest -bio_pair -ssl2 -server_auth -client_auth", $outFile);
+
+   system("ssltest -bio_pair -ssl3 (CLIB_OPT)/>$outFile");
+   log_desc("Testing sslv3 via BIO pair:");
+   log_output("ssltest -bio_pair -ssl3", $outFile);
+
+   system("$ssltest -bio_pair -ssl3 -server_auth (CLIB_OPT)/>$outFile");
+   log_desc("Testing sslv3 with server authentication via BIO pair:");
+   log_output("$ssltest -bio_pair -ssl3 -server_auth", $outFile);
+
+   system("$ssltest -bio_pair -ssl3 -client_auth (CLIB_OPT)/>$outFile");
+   log_desc("Testing sslv3 with client authentication  via BIO pair:");
+   log_output("$ssltest -bio_pair -ssl3 -client_auth", $outFile);
+
+   system("$ssltest -bio_pair -ssl3 -server_auth -client_auth (CLIB_OPT)/>$outFile");
+   log_desc("Testing sslv3 with both client and server authentication via BIO pair:");
+   log_output("$ssltest -bio_pair -ssl3 -server_auth -client_auth", $outFile);
+
+   system("ssltest -bio_pair (CLIB_OPT)/>$outFile");
+   log_desc("Testing sslv2/sslv3 via BIO pair:");
+   log_output("ssltest -bio_pair", $outFile);
+
+   system("$ssltest -bio_pair -server_auth (CLIB_OPT)/>$outFile");
+   log_desc("Testing sslv2/sslv3 with server authentication via BIO pair:");
+   log_output("$ssltest -bio_pair -server_auth", $outFile);
+
+   system("$ssltest -bio_pair -client_auth (CLIB_OPT)/>$outFile");
+   log_desc("Testing sslv2/sslv3 with client authentication via BIO pair:");
+   log_output("$ssltest -bio_pair -client_auth", $outFile);
+
+   system("$ssltest -bio_pair -server_auth -client_auth (CLIB_OPT)/>$outFile");
+   log_desc("Testing sslv2/sslv3 with both client and server authentication via BIO pair:");
+   log_output("$ssltest -bio_pair -server_auth -client_auth", $outFile);
+}
+
+
+############################################################################
+sub ca_tests
+{
+   my $outFile = "$output_path\\ca_tst.out";
+
+   my($CAkey)     = "$output_path\\keyCA.ss";
+   my($CAcert)    = "$output_path\\certCA.ss";
+   my($CAserial)  = "$output_path\\certCA.srl";
+   my($CAreq)     = "$output_path\\reqCA.ss";
+   my($CAreq2)    = "$output_path\\req2CA.ss";
+
+   my($CAconf)    = "$test_path\\CAss.cnf";
+
+   my($Uconf)     = "$test_path\\Uss.cnf";
+
+   my($Ukey)      = "$output_path\\keyU.ss";
+   my($Ureq)      = "$output_path\\reqU.ss";
+   my($Ucert)     = "$output_path\\certU.ss";
+
+   print( "\nRUNNING CA TESTS:\n\n");
+
+   print( OUT "\n========================================================\n");
+   print( OUT "CA TESTS:\n");
+
+   system("openssl2 req -config $CAconf -out $CAreq -keyout $CAkey -new (CLIB_OPT)/>$outFile");
+   log_desc("Make a certificate request using req:");
+   log_output("openssl2 req -config $CAconf -out $CAreq -keyout $CAkey -new", $outFile);
+
+   system("openssl2 x509 -CAcreateserial -in $CAreq -days 30 -req -out $CAcert -signkey $CAkey (CLIB_OPT)/>$outFile");
+   log_desc("Convert the certificate request into a self signed certificate using x509:");
+   log_output("openssl2 x509 -CAcreateserial -in $CAreq -days 30 -req -out $CAcert -signkey $CAkey", $outFile);
+
+   system("openssl2 x509 -in $CAcert -x509toreq -signkey $CAkey -out $CAreq2 (CLIB_OPT)/>$outFile");
+   log_desc("Convert a certificate into a certificate request using 'x509':");
+   log_output("openssl2 x509 -in $CAcert -x509toreq -signkey $CAkey -out $CAreq2", $outFile);
+
+   system("openssl2 req -config $OpenSSL_config -verify -in $CAreq -noout (CLIB_OPT)/>$outFile");
+   log_output("openssl2 req -config $OpenSSL_config -verify -in $CAreq -noout", $outFile);
+
+   system("openssl2 req -config $OpenSSL_config -verify -in $CAreq2 -noout (CLIB_OPT)/>$outFile");
+   log_output( "openssl2 req -config $OpenSSL_config -verify -in $CAreq2 -noout", $outFile);
+
+   system("openssl2 verify -CAfile $CAcert $CAcert (CLIB_OPT)/>$outFile");
+   log_output("openssl2 verify -CAfile $CAcert $CAcert", $outFile);
+
+   system("openssl2 req -config $Uconf -out $Ureq -keyout $Ukey -new (CLIB_OPT)/>$outFile");
+   log_desc("Make another certificate request using req:");
+   log_output("openssl2 req -config $Uconf -out $Ureq -keyout $Ukey -new", $outFile);
+
+   system("openssl2 x509 -CAcreateserial -in $Ureq -days 30 -req -out $Ucert -CA $CAcert -CAkey $CAkey -CAserial $CAserial (CLIB_OPT)/>$outFile");
+   log_desc("Sign certificate request with the just created CA via x509:");
+   log_output("openssl2 x509 -CAcreateserial -in $Ureq -days 30 -req -out $Ucert -CA $CAcert -CAkey $CAkey -CAserial $CAserial", $outFile);
+
+   system("openssl2 verify -CAfile $CAcert $Ucert (CLIB_OPT)/>$outFile");
+   log_output("openssl2 verify -CAfile $CAcert $Ucert", $outFile);
+
+   system("openssl2 x509 -subject -issuer -startdate -enddate -noout -in $Ucert (CLIB_OPT)/>$outFile");
+   log_desc("Certificate details");
+   log_output("openssl2 x509 -subject -issuer -startdate -enddate -noout -in $Ucert", $outFile);
+
+   print(OUT "--\n");
+   print(OUT "The generated CA certificate is $CAcert\n");
+   print(OUT "The generated CA private key is $CAkey\n");
+   print(OUT "The current CA signing serial number is in $CAserial\n");
+
+   print(OUT "The generated user certificate is $Ucert\n");
+   print(OUT "The generated user private key is $Ukey\n");
+   print(OUT "--\n");
+}
+
+############################################################################
+sub evp_tests
+{
+   my $i = 'evp_test';
+
+   print( "\nRUNNING EVP TESTS:\n\n");
+
+   print( OUT "\n========================================================\n");
+   print( OUT "EVP TESTS:\n\n");
+
+   if (-e "$base_path\\$i.nlm")
+   {
+       my $outFile = "$output_path\\$i.out";
+       system("$i $test_path\\evptests.txt (CLIB_OPT)/>$outFile");
+       log_desc("Test: $i\.nlm:");
+       log_output("", $outFile );
+   }
+   else
+   {
+       log_desc("Test: $i\.nlm: file not found");
+   }
+}
+
+############################################################################
+sub log_output( $ $ )
+{
+   my( $desc, $file ) = @_;
+   my($error) = 0;
+   my($key);
+   my($msg);
+
+   if ($desc)
+   {
+      print("\r$desc\n");
+      print(OUT "$desc\n");
+   }
+
+      # loop waiting for test program to complete
+   while ( stat($file) == 0)
+      { print(". "); sleep(1); }
+
+
+      # copy test output to log file
+   open(IN, "<$file");
+   while (<IN>)
+   {
+      print(OUT $_);
+      if ( $_ =~ /ERROR/ )
+      {
+         $error = 1;
+      }
+   }
+      # close and delete the temporary test output file
+   close(IN);
+   unlink($file);
+
+   if ( $error == 0 )
+   {
+      $msg = "Test Succeeded";
+   }
+   else
+   {
+      $msg = "Test Failed";
+   }
+
+   print(OUT "$msg\n");
+
+   if ($pause)
+   {
+      print("$msg - press ENTER to continue...");
+      $key = getc;
+      print("\n");
+   }
+
+      # Several of the testing scripts run a loop loading the
+      # same NLM with different options.
+      # On slow NetWare machines there appears to be some delay in the
+      # OS actually unloading the test nlms and the OS complains about.
+      # the NLM already being loaded.  This additional pause is to
+      # to help provide a little more time for unloading before trying to
+      # load again.
+   sleep(1);
+}
+
+
+############################################################################
+sub log_desc( $ )
+{
+   my( $desc ) = @_;
+
+   print("\n");
+   print("$desc\n");
+
+   print(OUT "\n");
+   print(OUT "$desc\n");
+   print(OUT "======================================\n");
+}
+
+############################################################################
+sub compare_files( $ $ $ )
+{
+   my( $file1, $file2, $binary ) = @_;
+   my( $n1, $n2, $b1, $b2 );
+   my($ret) = 1;
+
+   open(IN0, $file1) || die "\nunable to open $file1\n";
+   open(IN1, $file2) || die "\nunable to open $file2\n";
+
+  if ($binary)
+  {
+      binmode IN0;
+      binmode IN1;
+  }
+
+   for (;;)
+   {
+      $n1 = read(IN0, $b1, 512);
+      $n2 = read(IN1, $b2, 512);
+
+      if ($n1 != $n2) {last;}
+      if ($b1 != $b2) {last;}
+
+      if ($n1 == 0)
+      {
+         $ret = 0;
+         last;
+      }
+   }
+   close(IN0);
+   close(IN1);
+   return($ret);
+}
+
+############################################################################
+sub do_wait()
+{
+   my($key);
+
+   if ($pause)
+   {
+      print("Press ENTER to continue...");
+      $key = getc;
+      print("\n");
+   }
+}
+
+
+############################################################################
+sub make_tmp_cert_file()
+{
+   my @cert_files = <$cert_path/*.pem>;
+
+      # delete the file if it already exists
+   unlink($tmp_cert);
+
+   open( TMP_CERT, ">$tmp_cert") || die "\nunable to open $tmp_cert\n";
+
+   print("building temporary cert file\n");
+
+   # create a temporary cert file that contains all the certs
+   foreach $i (@cert_files)
+   {
+      open( IN_CERT, $i ) || die "\nunable to open $i\n";
+
+      for(;;)
+      {
+         $n = sysread(IN_CERT, $data, 1024);
+
+         if ($n == 0)
+         {
+            close(IN_CERT);
+            last;
+         };
+
+         syswrite(TMP_CERT, $data, $n);
+      }
+   }
+
+   close( TMP_CERT );
+}

Netware/globals.txt

@@ -0,0 +1,254 @@
+An initial review of the OpenSSL code was done to determine how many 
+global variables where present.  The idea was to determine the amount of 
+work required to pull the globals into an instance data structure in 
+order to build a Library NLM for NetWare.  This file contains the results 
+of the review.  Each file is listed along with the globals in the file.  
+The initial review was done very quickly so this list is probably
+not a comprehensive list.
+
+
+cryptlib.c
+===========================================
+
+static STACK *app_locks=NULL;
+
+static STACK_OF(CRYPTO_dynlock) *dyn_locks=NULL;
+
+static void (MS_FAR *locking_callback)(int mode,int type,
+   const char *file,int line)=NULL;
+static int (MS_FAR *add_lock_callback)(int *pointer,int amount,
+   int type,const char *file,int line)=NULL;
+static unsigned long (MS_FAR *id_callback)(void)=NULL;
+static struct CRYPTO_dynlock_value *(MS_FAR *dynlock_create_callback)
+   (const char *file,int line)=NULL;
+static void (MS_FAR *dynlock_lock_callback)(int mode,
+   struct CRYPTO_dynlock_value *l, const char *file,int line)=NULL;
+static void (MS_FAR *dynlock_destroy_callback)(struct CRYPTO_dynlock_value *l,
+   const char *file,int line)=NULL;
+
+
+mem.c
+===========================================
+static int allow_customize = 1;      /* we provide flexible functions for */
+static int allow_customize_debug = 1;/* exchanging memory-related functions at
+
+/* may be changed as long as `allow_customize' is set */
+static void *(*malloc_locked_func)(size_t)  = malloc;
+static void (*free_locked_func)(void *)     = free;
+static void *(*malloc_func)(size_t)         = malloc;
+static void *(*realloc_func)(void *, size_t)= realloc;
+static void (*free_func)(void *)            = free;
+
+/* use default functions from mem_dbg.c */
+static void (*malloc_debug_func)(void *,int,const char *,int,int)
+   = CRYPTO_dbg_malloc;
+static void (*realloc_debug_func)(void *,void *,int,const char *,int,int)
+   = CRYPTO_dbg_realloc;
+static void (*free_debug_func)(void *,int) = CRYPTO_dbg_free;
+static void (*set_debug_options_func)(long) = CRYPTO_dbg_set_options;
+static long (*get_debug_options_func)(void) = CRYPTO_dbg_get_options;
+
+
+mem_dbg.c
+===========================================
+static int mh_mode=CRYPTO_MEM_CHECK_OFF;
+static unsigned long order = 0; /* number of memory requests */
+static LHASH *mh=NULL; /* hash-table of memory requests (address as key) */
+
+static LHASH *amih=NULL; /* hash-table with those app_mem_info_st's */
+static long options =             /* extra information to be recorded */
+static unsigned long disabling_thread = 0;
+
+
+err.c
+===========================================
+static LHASH *error_hash=NULL;
+static LHASH *thread_hash=NULL;
+
+several files have routines with static "init" to track if error strings
+   have been loaded ( may not want seperate error strings for each process )
+   The "init" variable can't be left "global" because the error has is a ptr
+   that is malloc'ed.  The malloc'ed error has is dependant on the "init"
+   vars.
+
+   files:
+      pem_err.c
+      cpt_err.c
+      pk12err.c
+      asn1_err.c
+      bio_err.c
+      bn_err.c
+      buf_err.c
+      comp_err.c
+      conf_err.c
+      cpt_err.c
+      dh_err.c
+      dsa_err.c
+      dso_err.c
+      evp_err.c
+      obj_err.c
+      pkcs7err.c
+      rand_err.c
+      rsa_err.c
+      rsar_err.c
+      ssl_err.c
+      x509_err.c
+      v3err.c
+		err.c
+
+These file have similar "init" globals but they are for other stuff not
+error strings:
+
+		bn_lib.c
+		ecc_enc.c
+		s23_clnt.c
+		s23_meth.c
+		s23_srvr.c
+		s2_clnt.c
+		s2_lib.c
+		s2_meth.c
+		s2_srvr.c
+		s3_clnt.c
+		s3_lib.c
+		s3_srvr.c
+		t1_clnt.c
+		t1_meth.c
+		t1_srvr.c
+
+rand_lib.c
+===========================================
+static RAND_METHOD *rand_meth= &rand_ssleay_meth;
+
+md_rand.c
+===========================================
+static int state_num=0,state_index=0;
+static unsigned char state[STATE_SIZE+MD_DIGEST_LENGTH];
+static unsigned char md[MD_DIGEST_LENGTH];
+static long md_count[2]={0,0};
+static double entropy=0;
+static int initialized=0;
+
+/* This should be set to 1 only when ssleay_rand_add() is called inside
+   an already locked state, so it doesn't try to lock and thereby cause
+   a hang.  And it should always be reset back to 0 before unlocking. */
+static int add_do_not_lock=0;
+
+obj_dat.c
+============================================
+static int new_nid=NUM_NID;
+static LHASH *added=NULL;
+
+b_sock.c
+===========================================
+static unsigned long BIO_ghbn_hits=0L;
+static unsigned long BIO_ghbn_miss=0L;
+static struct ghbn_cache_st
+   {
+   char name[129];
+   struct hostent *ent;
+   unsigned long order;
+   } ghbn_cache[GHBN_NUM];
+
+static int wsa_init_done=0;
+
+
+bio_lib.c
+===========================================
+static STACK_OF(CRYPTO_EX_DATA_FUNCS) *bio_meth=NULL;
+static int bio_meth_num=0;
+
+
+bn_lib.c
+========================================
+static int bn_limit_bits=0;
+static int bn_limit_num=8;        /* (1<<bn_limit_bits) */
+static int bn_limit_bits_low=0;
+static int bn_limit_num_low=8;    /* (1<<bn_limit_bits_low) */
+static int bn_limit_bits_high=0;
+static int bn_limit_num_high=8;   /* (1<<bn_limit_bits_high) */
+static int bn_limit_bits_mont=0;
+static int bn_limit_num_mont=8;   /* (1<<bn_limit_bits_mont) */
+
+conf_lib.c
+========================================
+static CONF_METHOD *default_CONF_method=NULL;
+
+dh_lib.c
+========================================
+static DH_METHOD *default_DH_method;
+static int dh_meth_num = 0;
+static STACK_OF(CRYPTO_EX_DATA_FUNCS) *dh_meth = NULL;
+
+dsa_lib.c
+========================================
+static DSA_METHOD *default_DSA_method;
+static int dsa_meth_num = 0;
+static STACK_OF(CRYPTO_EX_DATA_FUNCS) *dsa_meth = NULL;
+
+dso_lib.c
+========================================
+static DSO_METHOD *default_DSO_meth = NULL;
+
+rsa_lib.c
+========================================
+static RSA_METHOD *default_RSA_meth=NULL;
+static int rsa_meth_num=0;
+static STACK_OF(CRYPTO_EX_DATA_FUNCS) *rsa_meth=NULL;
+
+x509_trs.c
+=======================================
+static int (*default_trust)(int id, X509 *x, int flags) = obj_trust;
+static STACK_OF(X509_TRUST) *trtable = NULL;
+
+x509_req.c
+=======================================
+static int *ext_nids = ext_nid_list;
+
+o_names.c
+======================================
+static LHASH *names_lh=NULL;
+static STACK_OF(NAME_FUNCS) *name_funcs_stack;
+static int free_type;
+static int names_type_num=OBJ_NAME_TYPE_NUM;
+
+
+th-lock.c - NEED to add support for locking for NetWare
+==============================================
+static long *lock_count;
+(other platform specific globals)
+
+x_x509.c
+==============================================
+static int x509_meth_num = 0;
+static STACK_OF(CRYPTO_EX_DATA_FUNCS) *x509_meth = NULL;
+
+
+evp_pbe.c
+============================================
+static STACK *pbe_algs;
+
+evp_key.c
+============================================
+static char prompt_string[80];
+
+ssl_ciph.c
+============================================
+static STACK_OF(SSL_COMP) *ssl_comp_methods=NULL;
+
+ssl_lib.c
+=============================================
+static STACK_OF(CRYPTO_EX_DATA_FUNCS) *ssl_meth=NULL;
+static STACK_OF(CRYPTO_EX_DATA_FUNCS) *ssl_ctx_meth=NULL;
+static int ssl_meth_num=0;
+static int ssl_ctx_meth_num=0;
+
+ssl_sess.c
+=============================================
+static int ssl_session_num=0;
+static STACK_OF(CRYPTO_EX_DATA_FUNCS) *ssl_session_meth=NULL;
+
+x509_vfy.c
+============================================
+static STACK_OF(CRYPTO_EX_DATA_FUNCS) *x509_store_ctx_method=NULL;
+static int x509_store_ctx_num=0;
+

Netware/readme.txt

@@ -0,0 +1,19 @@
+
+Contents of the openssl\netware directory
+==========================================
+
+Regular files:
+
+readme.txt     - this file
+do_tests.pl    - perl script used to run the OpenSSL tests on NetWare
+cpy_tests.bat  - batch to to copy test stuff to NetWare server
+build.bat      - batch file to help with builds
+set_env.bat    - batch file to help setup build environments
+globals.txt    - results of initial code review to identify OpenSSL global variables
+
+
+The following files are generated by the various scripts.  They are
+recreated each time and it is okay to delete them.
+
+*.def - command files used by Metrowerks linker
+*.mak - make files generated by mk1mf.pl

Netware/set_env.bat

@@ -0,0 +1,112 @@
+@echo off
+
+rem ========================================================================
+rem   Batch file to assist in setting up the necessary enviroment for
+rem   building OpenSSL for NetWare.
+rem
+rem   usage:
+rem      set_env [target]
+rem
+rem      target      - "netware-clib" - Clib build
+rem                  - "netware-libc" - LibC build
+rem
+rem
+
+if "a%1" == "a" goto usage
+               
+set LIBC_BUILD=
+set CLIB_BUILD=
+set GNUC=
+
+if "%1" == "netware-clib" set CLIB_BUILD=Y
+if "%1" == "netware-clib" set LIBC_BUILD=
+
+if "%1" == "netware-libc" set LIBC_BUILD=Y
+if "%1" == "netware-libc" set CLIB_BUILD=
+
+if "%2" == "gnuc" set GNUC=Y
+if "%2" == "codewarrior" set GNUC=
+
+rem   Location of tools (compiler, linker, etc)
+if "%NDKBASE%" == "" set NDKBASE=c:\Novell
+
+rem   If Perl for Win32 is not already in your path, add it here
+set PERL_PATH=
+
+rem   Define path to the Metrowerks command line tools
+rem   or GNU Crosscompiler gcc / nlmconv
+rem   ( compiler, assembler, linker)
+if "%GNUC%" == "Y" set COMPILER_PATH=c:\usr\i586-netware\bin;c:\usr\bin
+if "%GNUC%" == "" set COMPILER_PATH=c:\prg\cwcmdl40
+
+rem   If using gnu make define path to utility
+rem set GNU_MAKE_PATH=%NDKBASE%\gnu
+set GNU_MAKE_PATH=c:\prg\tools
+
+rem   If using ms nmake define path to nmake
+rem set MS_NMAKE_PATH=%NDKBASE%\msvc\600\bin
+
+rem   If using NASM assembler define path
+rem set NASM_PATH=%NDKBASE%\nasm
+set NASM_PATH=c:\prg\tools
+
+rem   Update path to include tool paths
+set path=%path%;%COMPILER_PATH%
+if not "%GNU_MAKE_PATH%" == "" set path=%path%;%GNU_MAKE_PATH%
+if not "%MS_NMAKE_PATH%" == "" set path=%path%;%MS_NMAKE_PATH%
+if not "%NASM_PATH%"     == "" set path=%path%;%NASM_PATH%
+if not "%PERL_PATH%"     == "" set path=%path%;%PERL_PATH%
+
+rem   Set INCLUDES to location of Novell NDK includes
+if "%LIBC_BUILD%" == "Y" set INCLUDE=%NDKBASE%\ndk\libc\include;%NDKBASE%\ndk\libc\include\winsock
+if "%CLIB_BUILD%" == "Y" set INCLUDE=%NDKBASE%\ndk\nwsdk\include\nlm;%NDKBASE%\ws295sdk\include
+
+rem   Set Imports to location of Novell NDK import files
+if "%LIBC_BUILD%" == "Y" set IMPORTS=%NDKBASE%\ndk\libc\imports
+if "%CLIB_BUILD%" == "Y" set IMPORTS=%NDKBASE%\ndk\nwsdk\imports
+
+rem   Set PRELUDE to the absolute path of the prelude object to link with in
+rem   the Metrowerks NetWare PDK - NOTE: for Clib builds "clibpre.o" is 
+rem   recommended, for LibC NKS builds libcpre.o must be used
+if "%GNUC%" == "Y" goto gnuc
+if "%LIBC_BUILD%" == "Y" set PRELUDE=%IMPORTS%\libcpre.o
+rem if "%CLIB_BUILD%" == "Y" set PRELUDE=%IMPORTS%\clibpre.o
+if "%CLIB_BUILD%" == "Y" set PRELUDE=%IMPORTS%\prelude.o
+echo using MetroWerks CodeWarrior 
+goto info
+
+:gnuc
+if "%LIBC_BUILD%" == "Y" set PRELUDE=%IMPORTS%\libcpre.gcc.o
+rem if "%CLIB_BUILD%" == "Y" set PRELUDE=%IMPORTS%\clibpre.gcc.o
+if "%CLIB_BUILD%" == "Y" set PRELUDE=%IMPORTS%\prelude.gcc.o
+echo using GNU GCC Compiler 
+
+:info
+echo.
+
+if "%LIBC_BUILD%" == "Y" echo Enviroment configured for LibC build
+if "%LIBC_BUILD%" == "Y" echo use "netware\build.bat netware-libc ..." 
+
+if "%CLIB_BUILD%" == "Y" echo Enviroment configured for CLib build
+if "%CLIB_BUILD%" == "Y" echo use "netware\build.bat netware-clib ..." 
+
+goto end
+
+:usage
+rem ===============================================================
+echo.
+echo No target build specified!
+echo.
+echo usage: set_env [target] [compiler]
+echo.
+echo target      - "netware-clib" - Clib build
+echo             - "netware-libc" - LibC build
+echo.
+echo compiler    - "gnuc"         - GNU GCC Compiler
+echo             - "codewarrior"  - MetroWerks CodeWarrior (default)
+echo.
+
+:end
+echo.
+
+

PROBLEMS

@@ -12,8 +12,8 @@ along the whole library path before it bothers looking for .a libraries.  This
 means that -L switches won't matter unless OpenSSL is built with shared
 library support.
 
-The workaround may be to change the following lines in apps/Makefile.ssl and
+The workaround may be to change the following lines in apps/Makefile and
-test/Makefile.ssl:
+test/Makefile:
 
   LIBCRYPTO=-L.. -lcrypto
   LIBSSL=-L.. -lssl
@@ -48,9 +48,9 @@ will interfere with each other and lead to test failure.
 The solution is simple for now: don't run parallell make when testing.
 
 
-* Bugs in gcc 3.0 triggered
+* Bugs in gcc triggered
 
-According to a problem report, there are bugs in gcc 3.0 that are
+- According to a problem report, there are bugs in gcc 3.0 that are
   triggered by some of the code in OpenSSL, more specifically in
   PEM_get_EVP_CIPHER_INFO().  The triggering code is the following:
 
@@ -63,6 +63,20 @@ you end up with an extra incrementation when *header != '4'.
 
   We recommend that you upgrade gcc to as high a 3.x version as you can.
 
+- According to multiple problem reports, some of our message digest
+  implementations trigger bug[s] in code optimizer in gcc 3.3 for sparc64
+  and gcc 2.96 for ppc. Former fails to complete RIPEMD160 test, while
+  latter - SHA one.
+
+  The recomendation is to upgrade your compiler. This naturally applies to
+  other similar cases.
+
+- There is a subtle Solaris x86-specific gcc run-time environment bug, which
+  "falls between" OpenSSL [0.9.8 and later], Solaris ld and GCC. The bug
+  manifests itself as Segmentation Fault upon early application start-up.
+  The problem can be worked around by patching the environment according to
+  http://www.openssl.org/~appro/values.c.
+
 * solaris64-sparcv9-cc SHA-1 performance with WorkShop 6 compiler.
 
 As subject suggests SHA-1 might perform poorly (4 times slower)
@@ -90,11 +104,94 @@ failures in other parts of the code.
 
 Workaround: modify the target to +O2 when building with no-asm.
 
-* Poor support for AIX shared builds.
+* Problems building shared libraries on SCO OpenServer Release 5.0.6
+  with gcc 2.95.3
 
-do_aix-shared rule is not flexible enough to parameterize through a
+The symptoms appear when running the test suite, more specifically
-config-line. './Configure aix43-cc shared' is working, but not
+test/ectest, with the following result:
-'./Configure aix64-gcc shared'. In latter case make fails to create shared
+
-libraries. It's possible to build 64-bit shared libraries by running
+OSSL_LIBPATH="`cd ..; pwd`"; LD_LIBRARY_PATH="$OSSL_LIBPATH:$LD_LIBRARY_PATH"; DYLD_LIBRARY_PATH="$OSSL_LIBPATH:$DYLD_LIBRARY_PATH"; SHLIB_PATH="$OSSL_LIBPATH:$SHLIB_PATH"; LIBPATH="$OSSL_LIBPATH:$LIBPATH"; if [ "debug-sco5-gcc" = "Cygwin" ]; then PATH="${LIBPATH}:$PATH"; fi; export LD_LIBRARY_PATH DYLD_LIBRARY_PATH SHLIB_PATH LIBPATH PATH; ./ectest
-'env OBJECT_MODE=64 make', but we need more elegant solution. Preferably one
+ectest.c:186: ABORT
-supporting even gcc shared builds. See RT#463 for background information.
+
+The cause of the problem seems to be that isxdigit(), called from
+BN_hex2bn(), returns 0 on a perfectly legitimate hex digit.  Further
+investigation shows that any of the isxxx() macros return 0 on any
+input.  A direct look in the information array that the isxxx() use,
+called __ctype, shows that it contains all zeroes...
+
+Taking a look at the newly created libcrypto.so with nm, one can see
+that the variable __ctype is defined in libcrypto's .bss (which
+explains why it is filled with zeroes):
+
+$ nm -Pg libcrypto.so | grep __ctype
+__ctype B 0011659c
+__ctype2 U         
+
+Curiously, __ctype2 is undefined, in spite of being declared in
+/usr/include/ctype.h in exactly the same way as __ctype.
+
+Any information helping to solve this issue would be deeply
+appreciated.
+
+NOTE: building non-shared doesn't come with this problem.
+
+* ULTRIX build fails with shell errors, such as "bad substitution"
+  and "test: argument expected"
+
+The problem is caused by ULTRIX /bin/sh supporting only original
+Bourne shell syntax/semantics, and the trouble is that the vast
+majority is so accustomed to more modern syntax, that very few
+people [if any] would recognize the ancient syntax even as valid.
+This inevitably results in non-trivial scripts breaking on ULTRIX,
+and OpenSSL isn't an exclusion. Fortunately there is workaround,
+hire /bin/ksh to do the job /bin/sh fails to do.
+
+1. Trick make(1) to use /bin/ksh by setting up following environ-
+   ment variables *prior* you execute ./Configure and make:
+
+	PROG_ENV=POSIX
+	MAKESHELL=/bin/ksh
+	export PROG_ENV MAKESHELL
+
+   or if your shell is csh-compatible:
+
+	setenv PROG_ENV POSIX
+	setenv MAKESHELL /bin/ksh
+
+2. Trick /bin/sh to use alternative expression evaluator. Create
+   following 'test' script for example in /tmp:
+
+	#!/bin/ksh
+	${0##*/} "$@"
+
+   Then 'chmod a+x /tmp/test; ln /tmp/test /tmp/[' and *prepend*
+   your $PATH with chosen location, e.g. PATH=/tmp:$PATH. Alter-
+   natively just replace system /bin/test and /bin/[ with the
+   above script.
+
+* hpux64-ia64-cc fails blowfish test.
+
+Compiler bug, presumably at particular patch level. It should be noted
+that same compiler generates correct 32-bit code, a.k.a. hpux-ia64-cc
+target. Drop optimization level to +O2 when compiling 64-bit bf_skey.o.
+
+* no-engines generates errors.
+
+Unfortunately, the 'no-engines' configuration option currently doesn't
+work properly.  Use 'no-hw' and you'll will at least get no hardware
+support.  We'll see how we fix that on OpenSSL versions past 0.9.8.
+
+* 'make test' fails in BN_sqr [commonly with "error 139" denoting SIGSEGV]
+  if elder GNU binutils were deployed to link shared libcrypto.so.
+
+As subject suggests the failure is caused by a bug in elder binutils,
+either as or ld, and was observed on FreeBSD and Linux. There are two
+options. First is naturally to upgrade binutils, the second one - to
+reconfigure with additional no-sse2 [or 386] option passed to ./config.
+
+* If configured with ./config no-dso, toolkit still gets linked with -ldl,
+  which most notably poses a problem when linking with dietlibc.
+
+We don't have framework to associate -ldl with no-dso, therefore the only
+way is to edit Makefile right after ./config no-dso and remove -ldl from
+EX_LIBS line.

README

@@ -1,10 +1,16 @@
 
- OpenSSL 0.9.7a Feb 19 2003
+ OpenSSL 0.9.8h-fips-dev test version
 
- Copyright (c) 1998-2003 The OpenSSL Project
+ Copyright (c) 1998-2007 The OpenSSL Project
  Copyright (c) 1995-1998 Eric A. Young, Tim J. Hudson
  All rights reserved.
 
+ WARNING
+ -------
+
+ This version of OpenSSL is a port of the FIPS 140-2 code to OpenSSL
+ 0.9.8. See the file README.FIPS for brief usage details.
+
  DESCRIPTION
  -----------
 
@@ -36,12 +42,13 @@
      actually logically part of it. It includes routines for the following:
 
      Ciphers
-        libdes - EAY's libdes DES encryption package which has been floating
+        libdes - EAY's libdes DES encryption package which was floating
-                 around the net for a few years.  It includes 15
+                 around the net for a few years, and was then relicensed by
-                 'modes/variations' of DES (1, 2 and 3 key versions of ecb,
+                 him as part of SSLeay.  It includes 15 'modes/variations'
-                 cbc, cfb and ofb; pcbc and a more general form of cfb and
+                 of DES (1, 2 and 3 key versions of ecb, cbc, cfb and ofb;
-                 ofb) including desx in cbc mode, a fast crypt(3), and
+                 pcbc and a more general form of cfb and ofb) including desx
-                 routines to read passwords from the keyboard.
+                 in cbc mode, a fast crypt(3), and routines to read
+                 passwords from the keyboard.
         RC4 encryption,
         RC2 encryption      - 4 different modes, ecb, cbc, cfb and ofb.
         Blowfish encryption - 4 different modes, ecb, cbc, cfb and ofb.
@@ -111,6 +118,12 @@
  should be contacted if that algorithm is to be used; their web page is
  http://www.ascom.ch/.
 
+ The MDC2 algorithm is patented by IBM.
+
+ NTT and Mitsubishi have patents and pending patents on the Camellia
+ algorithm, but allow use at no charge without requiring an explicit
+ licensing agreement: http://info.isl.ntt.co.jp/crypt/eng/info/chiteki.html
+
  INSTALLATION
  ------------
 
@@ -173,11 +186,17 @@
  textual explanation of what your patch does.
 
  Note: For legal reasons, contributions from the US can be accepted only
- if a TSA notification and a copy of the patch is sent to crypt@bis.doc.gov;
+ if a TSU notification and a copy of the patch are sent to crypt@bis.doc.gov
- see http://www.bis.doc.gov/Encryption/PubAvailEncSourceCodeNofify.html [sic]
+ (formerly BXA) with a copy to the ENC Encryption Request Coordinator;
- and http://w3.access.gpo.gov/bis/ear/pdf/740.pdf (EAR Section 740.13(e)).
+ please take some time to look at
+    http://www.bis.doc.gov/Encryption/PubAvailEncSourceCodeNofify.html [sic]
+ and
+    http://w3.access.gpo.gov/bis/ear/pdf/740.pdf (EAR Section 740.13(e))
+ for the details. If "your encryption source code is too large to serve as
+ an email attachment", they are glad to receive it by fax instead; hope you
+ have a cheap long-distance plan.
 
- The preferred format for changes is "diff -u" output. You might
+ Our preferred format for changes is "diff -u" output. You might
  generate it like this:
 
  # cd openssl-work
@@ -185,3 +204,4 @@
  # ./Configure dist; make clean
  # cd ..
  # diff -ur openssl-orig openssl-work > mydiffs.patch
+

README.FIPS

@@ -0,0 +1,84 @@
+Brief instructions on using OpenSSL 0.9.8 FIPS 140-2 test branch.
+
+NOTE: this distribution is NOT FIPS140-2 validated. These instructions are
+intended for people who wish to test the OpenSSL FIPS 140-2 1.2 module. More
+complete instructions will be made available after validation.
+
+1. Build from test tarball.
+
+Download the OpenSSL test 1.2 source tree. The current version has the CVS tag
+FIPS_098_TEST_8 or can be downloaded from:
+
+ftp://ftp.openssl.org/snapshot/openssl-fips-test-1.2.0.tar.gz
+
+Ignore any instructions in that tree: they are likely to be out of date.
+
+If you are using a Unix like environment run the following commands. You may
+NOT specify ANY other options at this stage.
+
+./config fipscanisterbuild
+make
+make install
+
+This will build and install the test 1.2 module and binaries under
+/usr/local/fips-1.0
+
+For Windows you need VC++, perl and NASM installed. This is now a pure VC++
+build: no alternative compilers or tools are required. From a VC++ environment
+do:
+
+ms\do_fips
+
+It should report that the compile was successful.
+
+This will compile binaries into the out32dll directory. They can be copied to
+a more convenient location.
+
+2. Link test module to a more recent version of OpenSSL.
+
+Once the test module has been installed it can be linked against a more recent
+version of OpenSSL. Currently only versions from the 0.9.8-fips stable branch
+can be used. It has the CVS tag OpenSSL-fips-0_9_8-stable daily snaphots can
+also be downloaded as:
+
+ftp://ftp.openssl.org/snapshot/openssl-0.9.8-fips-test-SNAP-YYMMDD.tar.gz
+
+For a Unix build the standrd build procedure is followed and the option "fips"
+is passed to either the config or Configure scripts. The fipscanisterbuild
+option MUST NOT be used. Any other options may be included. Static libraries
+can be built using the no-shared option.
+
+For example:
+
+./config fips
+
+./config fips no-shared
+
+For Windows builds the options "fips" and --with-fipslibdir=<path> are passed
+to the Configure script where <path> is wherever the module was installed
+For example:
+
+perl Configure fips --with-fipslibdir=C:\some\path\fips
+
+Then the build process continues in the normal way for example:
+
+ms\do_nasm
+nmake -f ms\ntdll.mak
+
+for DLLs or
+
+ms\do_nasm
+nmake -f ms\nt.mak
+
+for static builds.
+
+3. Test new version of OpenSSL.
+
+The new test FIPS enabled OpenSSL can now be tested in the usual way.
+
+Additionally binary compatibility tests against OpenSSL 0.9.8x would be
+MOST welcomed. This will help avoid any major issues when the 0.9.8-fips
+branch is merged into 0.9.8 branch.
+
+Any problems should be reported to the openssl-dev mailing list.
+

STATUS

@@ -1,12 +1,34 @@
 
   OpenSSL STATUS                           Last modified at
-  ______________                           $Date: 2003/02/19 12:33:52 $
+  ______________                           $Date: 2007/02/23 12:12:27 $
 
   DEVELOPMENT STATE
 
-    o  OpenSSL 0.9.8:  Under development...
+    o  OpenSSL 0.9.9:  Under development...
+    o  OpenSSL 0.9.8e: Released on February  23rd, 2007
+    o  OpenSSL 0.9.8d: Released on September 28th, 2006
+    o  OpenSSL 0.9.8c: Released on September  5th, 2006
+    o  OpenSSL 0.9.8b: Released on May        4th, 2006
+    o  OpenSSL 0.9.8a: Released on October   11th, 2005
+    o  OpenSSL 0.9.8:  Released on July       5th, 2005
+    o  OpenSSL 0.9.7m: Released on February  23rd, 2007
+    o  OpenSSL 0.9.7l: Released on September 28th, 2006
+    o  OpenSSL 0.9.7k: Released on September  5th, 2006
+    o  OpenSSL 0.9.7j: Released on May        4th, 2006
+    o  OpenSSL 0.9.7i: Released on October   14th, 2005
+    o  OpenSSL 0.9.7h: Released on October   11th, 2005
+    o  OpenSSL 0.9.7g: Released on April     11th, 2005
+    o  OpenSSL 0.9.7f: Released on March     22nd, 2005
+    o  OpenSSL 0.9.7e: Released on October   25th, 2004
+    o  OpenSSL 0.9.7d: Released on March     17th, 2004
+    o  OpenSSL 0.9.7c: Released on September 30th, 2003
+    o  OpenSSL 0.9.7b: Released on April     10th, 2003
     o  OpenSSL 0.9.7a: Released on February  19th, 2003
     o  OpenSSL 0.9.7:  Released on December  31st, 2002
+    o  OpenSSL 0.9.6m: Released on March     17th, 2004
+    o  OpenSSL 0.9.6l: Released on November   4th, 2003
+    o  OpenSSL 0.9.6k: Released on September 30th, 2003
+    o  OpenSSL 0.9.6j: Released on April     10th, 2003
     o  OpenSSL 0.9.6i: Released on February  19th, 2003
     o  OpenSSL 0.9.6h: Released on December   5th, 2002
     o  OpenSSL 0.9.6g: Released on August     9th, 2002
@@ -29,17 +51,8 @@
 
   RELEASE SHOWSTOPPERS
 
-    o [2002-11-21]
+    o The Makefiles fail with some SysV makes.
-      PR 343 mentions that scrubbing memory with 'memset(ptr, 0, n)' may
+    o 
-      be optimized away in modern compilers.  This is definitely not good
-      and needs to be fixed immediately.  The formula to use is presented
-      in:
-
-      http://online.securityfocus.com/archive/82/297918/2002-10-27/2002-11-02/0
-
-      The problem report that mentions this is:
-
-      https://www.aet.TU-Cottbus.DE/rt2/Ticket/Display.html?id=343
 
   AVAILABLE PATCHES
 
@@ -55,18 +68,18 @@
 	Private key, certificate and CRL API and implementation.
 	Developing and bugfixing PKCS#7 (S/MIME code).
         Various X509 issues: character sets, certificate request extensions.
-    o Geoff and Richard are currently working on:
-	ENGINE (the new code that gives hardware support among others).
     o Richard is currently working on:
-	UI (User Interface)
-	UTIL (a new set of library functions to support some higher level
-	      functionality that is currently missing).
-	Shared library support for VMS.
-	Kerberos 5 authentication (Heimdal)
 	Constification
+	Attribute Certificate support
+	Certificate Pair support
+	Storage Engines (primarly an LDAP storage engine)
+	Certificate chain validation with full RFC 3280 compatibility
 
   NEEDS PATCH
 
+    o  0.9.8-dev: COMPLEMENTOFALL and COMPLEMENTOFDEFAULT do not
+       handle ECCdraft cipher suites correctly.
+
     o  apps/ca.c: "Sign the certificate?" - "n" creates empty certificate file
 
     o  "OpenSSL STATUS" is never up-to-date.

VMS/VMSify-conf.pl

@@ -0,0 +1,34 @@
+#! /usr/bin/perl
+
+use strict;
+use warnings;
+
+my @directory_vars = ( "dir", "certs", "crl_dir", "new_certs_dir" );
+my @file_vars = ( "database", "certificate", "serial", "crlnumber",
+		  "crl", "private_key", "RANDFILE" );
+while(<STDIN>) {
+    chomp;
+    foreach my $d (@directory_vars) {
+	if (/^(\s*\#?\s*${d}\s*=\s*)\.\/([^\s\#]*)([\s\#].*)$/) {
+	    $_ = "$1sys\\\$disk:\[.$2$3";
+	} elsif (/^(\s*\#?\s*${d}\s*=\s*)(\w[^\s\#]*)([\s\#].*)$/) {
+	    $_ = "$1sys\\\$disk:\[.$2$3";
+	}
+	s/^(\s*\#?\s*${d}\s*=\s*\$\w+)\/([^\s\#]*)([\s\#].*)$/$1.$2\]$3/;
+	while(/^(\s*\#?\s*${d}\s*=\s*(\$\w+\.|sys\\\$disk:\[\.)[\w\.]+)\/([^\]]*)\](.*)$/) {
+	    $_ = "$1.$3]$4";
+	}
+    }
+    foreach my $f (@file_vars) {
+	s/^(\s*\#?\s*${f}\s*=\s*)\.\/(.*)$/$1sys\\\$disk:\[\/$2/;
+	while(/^(\s*\#?\s*${f}\s*=\s*(\$\w+|sys\\\$disk:\[)[^\/]*)\/(\w+\/[^\s\#]*)([\s\#].*)$/) {
+	    $_ = "$1.$3$4";
+	}
+	if (/^(\s*\#?\s*${f}\s*=\s*(\$\w+|sys\\\$disk:\[)[^\/]*)\/(\w+)([\s\#].*)$/) {
+	    $_ = "$1]$3.$4";
+	} elsif  (/^(\s*\#?\s*${f}\s*=\s*(\$\w+|sys\\\$disk:\[)[^\/]*)\/([^\s\#]*)([\s\#].*)$/) {
+	    $_ = "$1]$3$4";
+	}
+   }
+    print $_,"\n";
+}

VMS/mkshared.com

@@ -285,6 +285,7 @@ $       if alg_entry .eqs. "" then goto loop2
 $       if alg_entry .nes. ","
 $       then
 $         if alg_entry .eqs. "KRB5" then goto loop ! Special for now
+$	  if alg_entry .eqs. "STATIC_ENGINE" then goto loop ! Special for now
 $         if f$trnlnm("OPENSSL_NO_"+alg_entry) .nes. "" then goto loop
 $	  goto loop2
 $       endif

apps/.cvsignore

@@ -3,3 +3,5 @@ Makefile.save
 der_chop
 der_chop.bak
 CA.pl
+*.flc
+semantic.cache

apps/CA.pl.in

@@ -36,16 +36,26 @@
 # default openssl.cnf file has setup as per the following
 # demoCA ... where everything is stored
 
+my $openssl;
+if(defined $ENV{OPENSSL}) {
+	$openssl = $ENV{OPENSSL};
+} else {
+	$openssl = "openssl";
+	$ENV{OPENSSL} = $openssl;
+}
+
 $SSLEAY_CONFIG=$ENV{"SSLEAY_CONFIG"};
-$DAYS="-days 365";
+$DAYS="-days 365";	# 1 year
-$REQ="openssl req $SSLEAY_CONFIG";
+$CADAYS="-days 1095";	# 3 years
-$CA="openssl ca $SSLEAY_CONFIG";
+$REQ="$openssl req $SSLEAY_CONFIG";
-$VERIFY="openssl verify";
+$CA="$openssl ca $SSLEAY_CONFIG";
-$X509="openssl x509";
+$VERIFY="$openssl verify";
-$PKCS12="openssl pkcs12";
+$X509="$openssl x509";
+$PKCS12="$openssl pkcs12";
 
 $CATOP="./demoCA";
 $CAKEY="cakey.pem";
+$CAREQ="careq.pem";
 $CACERT="cacert.pem";
 
 $DIRMODE = 0777;
@@ -58,19 +68,19 @@ foreach (@ARGV) {
 	    exit 0;
 	} elsif (/^-newcert$/) {
 	    # create a certificate
-	    system ("$REQ -new -x509 -keyout newreq.pem -out newreq.pem $DAYS");
+	    system ("$REQ -new -x509 -keyout newkey.pem -out newcert.pem $DAYS");
 	    $RET=$?;
-	    print "Certificate (and private key) is in newreq.pem\n"
+	    print "Certificate is in newcert.pem, private key is in newkey.pem\n"
 	} elsif (/^-newreq$/) {
 	    # create a certificate request
-	    system ("$REQ -new -keyout newreq.pem -out newreq.pem $DAYS");
+	    system ("$REQ -new -keyout newkey.pem -out newreq.pem $DAYS");
 	    $RET=$?;
-	    print "Request (and private key) is in newreq.pem\n";
+	    print "Request is in newreq.pem, private key is in newkey.pem\n";
 	} elsif (/^-newreq-nodes$/) {
 	    # create a certificate request
-	    system ("$REQ -new -nodes -keyout newreq.pem -out newreq.pem $DAYS");
+	    system ("$REQ -new -nodes -keyout newkey.pem -out newreq.pem $DAYS");
 	    $RET=$?;
-	    print "Request (and private key) is in newreq.pem\n";
+	    print "Request is in newreq.pem, private key is in newkey.pem\n";
 	} elsif (/^-newca$/) {
 		# if explicitly asked for or it doesn't exist then setup the
 		# directory structure that Eric likes to manage things 
@@ -82,11 +92,11 @@ foreach (@ARGV) {
 		mkdir "${CATOP}/crl", $DIRMODE ;
 		mkdir "${CATOP}/newcerts", $DIRMODE;
 		mkdir "${CATOP}/private", $DIRMODE;
-		open OUT, ">${CATOP}/serial";
-		print OUT "01\n";
-		close OUT;
 		open OUT, ">${CATOP}/index.txt";
 		close OUT;
+		open OUT, ">${CATOP}/crlnumber";
+		print OUT "01\n";
+		close OUT;
 	    }
 	    if ( ! -f "${CATOP}/private/$CAKEY" ) {
 		print "CA certificate filename (or enter to create)\n";
@@ -101,18 +111,24 @@ foreach (@ARGV) {
 		    $RET=$?;
 		} else {
 		    print "Making CA certificate ...\n";
-		    system ("$REQ -new -x509 -keyout " .
+		    system ("$REQ -new -keyout " .
-			"${CATOP}/private/$CAKEY -out ${CATOP}/$CACERT $DAYS");
+			"${CATOP}/private/$CAKEY -out ${CATOP}/$CAREQ");
+		    system ("$CA -create_serial " .
+			"-out ${CATOP}/$CACERT $CADAYS -batch " . 
+			"-keyfile ${CATOP}/private/$CAKEY -selfsign " .
+			"-extensions v3_ca " .
+			"-infiles ${CATOP}/$CAREQ ");
 		    $RET=$?;
 		}
 	    }
 	} elsif (/^-pkcs12$/) {
 	    my $cname = $ARGV[1];
 	    $cname = "My Certificate" unless defined $cname;
-	    system ("$PKCS12 -in newcert.pem -inkey newreq.pem " .
+	    system ("$PKCS12 -in newcert.pem -inkey newkey.pem " .
 			"-certfile ${CATOP}/$CACERT -out newcert.p12 " .
 			"-export -name \"$cname\"");
 	    $RET=$?;
+	    print "PKCS #12 file is in newcert.p12\n";
 	    exit $RET;
 	} elsif (/^-xsign$/) {
 	    system ("$CA -policy policy_anything -infiles newreq.pem");

apps/CA.sh

@@ -30,14 +30,18 @@
 # default openssl.cnf file has setup as per the following
 # demoCA ... where everything is stored
 
-DAYS="-days 365"
+if [ -z "$OPENSSL" ]; then OPENSSL=openssl; fi
-REQ="openssl req $SSLEAY_CONFIG"
+
-CA="openssl ca $SSLEAY_CONFIG"
+DAYS="-days 365"	# 1 year
-VERIFY="openssl verify"
+CADAYS="-days 1095"	# 3 years
-X509="openssl x509"
+REQ="$OPENSSL req $SSLEAY_CONFIG"
+CA="$OPENSSL ca $SSLEAY_CONFIG"
+VERIFY="$OPENSSL verify"
+X509="$OPENSSL x509"
 
 CATOP=./demoCA
 CAKEY=./cakey.pem
+CAREQ=./careq.pem
 CACERT=./cacert.pem
 
 for i
@@ -49,15 +53,15 @@ case $i in
     ;;
 -newcert) 
     # create a certificate
-    $REQ -new -x509 -keyout newreq.pem -out newreq.pem $DAYS
+    $REQ -new -x509 -keyout newkey.pem -out newcert.pem $DAYS
     RET=$?
-    echo "Certificate (and private key) is in newreq.pem"
+    echo "Certificate is in newcert.pem, private key is in newkey.pem"
     ;;
 -newreq) 
     # create a certificate request
-    $REQ -new -keyout newreq.pem -out newreq.pem $DAYS
+    $REQ -new -keyout newkey.pem -out newreq.pem $DAYS
     RET=$?
-    echo "Request (and private key) is in newreq.pem"
+    echo "Request is in newreq.pem, private key is in newkey.pem"
     ;;
 -newca)     
     # if explicitly asked for or it doesn't exist then setup the directory
@@ -70,7 +74,7 @@ case $i in
 	mkdir ${CATOP}/crl 
 	mkdir ${CATOP}/newcerts
 	mkdir ${CATOP}/private
-	echo "01" > ${CATOP}/serial
+	echo "00" > ${CATOP}/serial
 	touch ${CATOP}/index.txt
     fi
     if [ ! -f ${CATOP}/private/$CAKEY ]; then
@@ -83,8 +87,11 @@ case $i in
 	    RET=$?
 	else
 	    echo "Making CA certificate ..."
-	    $REQ -new -x509 -keyout ${CATOP}/private/$CAKEY \
+	    $REQ -new -keyout ${CATOP}/private/$CAKEY \
-			   -out ${CATOP}/$CACERT $DAYS
+			   -out ${CATOP}/$CAREQ
+	    $CA -out ${CATOP}/$CACERT $CADAYS -batch \
+			   -keyfile ${CATOP}/private/$CAKEY -selfsign \
+			   -infiles ${CATOP}/$CAREQ 
 	    RET=$?
 	fi
     fi

apps/Makefile

@@ -0,0 +1,926 @@
+#
+#  apps/Makefile
+#
+
+DIR=		apps
+TOP=		..
+CC=		cc
+INCLUDES=	-I$(TOP) -I../include $(KRB5_INCLUDES)
+CFLAG=		-g -static
+MAKEFILE=	Makefile
+PERL=		perl
+RM=		rm -f
+# KRB5 stuff
+KRB5_INCLUDES=
+LIBKRB5=
+
+PEX_LIBS=
+EX_LIBS= 
+EXE_EXT= 
+
+SHLIB_TARGET=
+
+CFLAGS= -DMONOLITH $(INCLUDES) $(CFLAG)
+
+GENERAL=Makefile makeapps.com install.com
+
+DLIBCRYPTO=../libcrypto.a
+DLIBSSL=../libssl.a
+LIBCRYPTO=-L.. -lcrypto
+LIBSSL=-L.. -lssl
+
+PROGRAM= openssl
+
+SCRIPTS=CA.sh CA.pl
+
+EXE= $(PROGRAM)$(EXE_EXT)
+
+E_EXE=	verify asn1pars req dgst dh dhparam enc passwd gendh errstr \
+	ca crl rsa rsautl dsa dsaparam ec ecparam \
+	x509 genrsa gendsa s_server s_client speed \
+	s_time version pkcs7 cms crl2pkcs7 sess_id ciphers nseq pkcs12 \
+	pkcs8 spkac smime rand engine ocsp prime
+
+PROGS= $(PROGRAM).c
+
+A_OBJ=apps.o
+A_SRC=apps.c
+S_OBJ=	s_cb.o s_socket.o
+S_SRC=	s_cb.c s_socket.c
+RAND_OBJ=app_rand.o
+RAND_SRC=app_rand.c
+
+E_OBJ=	verify.o asn1pars.o req.o dgst.o dh.o dhparam.o enc.o passwd.o gendh.o errstr.o \
+	ca.o pkcs7.o crl2p7.o crl.o \
+	rsa.o rsautl.o dsa.o dsaparam.o ec.o ecparam.o \
+	x509.o genrsa.o gendsa.o s_server.o s_client.o speed.o \
+	s_time.o $(A_OBJ) $(S_OBJ) $(RAND_OBJ) version.o sess_id.o \
+	ciphers.o nseq.o pkcs12.o pkcs8.o spkac.o smime.o rand.o engine.o \
+	ocsp.o prime.o cms.o
+
+E_SRC=	verify.c asn1pars.c req.c dgst.c dh.c enc.c passwd.c gendh.c errstr.c ca.c \
+	pkcs7.c crl2p7.c crl.c \
+	rsa.c rsautl.c dsa.c dsaparam.c ec.c ecparam.c \
+	x509.c genrsa.c gendsa.c s_server.c s_client.c speed.c \
+	s_time.c $(A_SRC) $(S_SRC) $(RAND_SRC) version.c sess_id.c \
+	ciphers.c nseq.c pkcs12.c pkcs8.c spkac.c smime.c rand.c engine.c \
+	ocsp.c prime.c cms.c
+
+SRC=$(E_SRC)
+
+EXHEADER=
+HEADER=	apps.h progs.h s_apps.h \
+	testdsa.h testrsa.h \
+	$(EXHEADER)
+
+ALL=    $(GENERAL) $(SRC) $(HEADER)
+
+top:
+	@(cd ..; $(MAKE) DIRS=$(DIR) all)
+
+all:	exe
+
+exe:	$(EXE)
+
+req: sreq.o $(A_OBJ) $(DLIBCRYPTO)
+	shlib_target=; if [ -n "$(SHARED_LIBS)" ]; then \
+		shlib_target="$(SHLIB_TARGET)"; \
+	fi; \
+	$(MAKE) -f $(TOP)/Makefile.shared -e \
+		APPNAME=req OBJECTS="sreq.o $(A_OBJ) $(RAND_OBJ)" \
+		LIBDEPS="$(PEX_LIBS) $(LIBCRYPTO) $(EX_LIBS)" \
+		link_app.$${shlib_target}
+
+sreq.o: req.c 
+	$(CC) -c $(INCLUDES) $(CFLAG) -o sreq.o req.c
+
+files:
+	$(PERL) $(TOP)/util/files.pl Makefile >> $(TOP)/MINFO
+
+install:
+	@[ -n "$(INSTALLTOP)" ] # should be set by top Makefile...
+	@set -e; for i in $(EXE); \
+	do  \
+	(echo installing $$i; \
+	 cp $$i $(INSTALL_PREFIX)$(INSTALLTOP)/bin/$$i.new; \
+	 chmod 755 $(INSTALL_PREFIX)$(INSTALLTOP)/bin/$$i.new; \
+	 mv -f $(INSTALL_PREFIX)$(INSTALLTOP)/bin/$$i.new $(INSTALL_PREFIX)$(INSTALLTOP)/bin/$$i ); \
+	 done;
+	@set -e; for i in $(SCRIPTS); \
+	do  \
+	(echo installing $$i; \
+	 cp $$i $(INSTALL_PREFIX)$(OPENSSLDIR)/misc/$$i.new; \
+	 chmod 755 $(INSTALL_PREFIX)$(OPENSSLDIR)/misc/$$i.new; \
+	 mv -f $(INSTALL_PREFIX)$(OPENSSLDIR)/misc/$$i.new $(INSTALL_PREFIX)$(OPENSSLDIR)/misc/$$i ); \
+	 done
+	@cp openssl.cnf $(INSTALL_PREFIX)$(OPENSSLDIR)/openssl.cnf.new; \
+	chmod 644 $(INSTALL_PREFIX)$(OPENSSLDIR)/openssl.cnf.new; \
+	mv -f  $(INSTALL_PREFIX)$(OPENSSLDIR)/openssl.cnf.new $(INSTALL_PREFIX)$(OPENSSLDIR)/openssl.cnf
+
+tags:
+	ctags $(SRC)
+
+tests:
+
+links:
+
+lint:
+	lint -DLINT $(INCLUDES) $(SRC)>fluff
+
+depend:
+	@if [ -z "$(THIS)" ]; then \
+	    $(MAKE) -f $(TOP)/Makefile reflect THIS=$@; \
+	else \
+	    $(MAKEDEPEND) -- $(CFLAG) $(INCLUDES) $(DEPFLAG) -- $(PROGS) $(SRC); \
+	fi
+
+dclean:
+	$(PERL) -pe 'if (/^# DO NOT DELETE THIS LINE/) {print; exit(0);}' $(MAKEFILE) >Makefile.new
+	mv -f Makefile.new $(MAKEFILE)
+
+clean:
+	rm -f *.o *.obj lib tags core .pure .nfs* *.old *.bak fluff $(EXE)
+	rm -f req
+
+$(DLIBSSL):
+	(cd ..; $(MAKE) DIRS=ssl all)
+
+$(DLIBCRYPTO):
+	(cd ..; $(MAKE) DIRS=crypto all)
+
+$(EXE): progs.h $(E_OBJ) $(PROGRAM).o $(DLIBCRYPTO) $(DLIBSSL)
+	$(RM) $(EXE)
+	shlib_target=; if [ -n "$(SHARED_LIBS)" ]; then \
+		shlib_target="$(SHLIB_TARGET)"; \
+	elif [ -n "$(FIPSCANLIB)" ]; then \
+	  FIPSLD_CC=$(CC); CC=$(TOP)/fips/fipsld; export CC FIPSLD_CC; \
+	fi; \
+	LIBRARIES="$(LIBSSL) $(LIBKRB5) $(LIBCRYPTO)" ; \
+	[ "x$(FIPSCANLIB)" = "xlibfips" ] && LIBRARIES="$$LIBRARIES -lfips"; \
+	$(MAKE) -f $(TOP)/Makefile.shared -e \
+		CC=$${CC} APPNAME=$(EXE) OBJECTS="$(PROGRAM).o $(E_OBJ)" \
+		LIBDEPS="$(PEX_LIBS) $$LIBRARIES $(EX_LIBS)" \
+		link_app.$${shlib_target}
+	-(cd ..; \
+	  OPENSSL="`pwd`/util/opensslwrap.sh"; export OPENSSL; \
+	  $(PERL) tools/c_rehash certs)
+
+progs.h: progs.pl
+	$(PERL) progs.pl $(E_EXE) >progs.h
+	$(RM) $(PROGRAM).o
+
+# DO NOT DELETE THIS LINE -- make depend depends on it.
+
+app_rand.o: ../e_os.h ../include/openssl/asn1.h ../include/openssl/bio.h
+app_rand.o: ../include/openssl/buffer.h ../include/openssl/conf.h
+app_rand.o: ../include/openssl/crypto.h ../include/openssl/e_os2.h
+app_rand.o: ../include/openssl/ec.h ../include/openssl/ecdh.h
+app_rand.o: ../include/openssl/ecdsa.h ../include/openssl/engine.h
+app_rand.o: ../include/openssl/evp.h ../include/openssl/fips.h
+app_rand.o: ../include/openssl/lhash.h ../include/openssl/obj_mac.h
+app_rand.o: ../include/openssl/objects.h ../include/openssl/opensslconf.h
+app_rand.o: ../include/openssl/opensslv.h ../include/openssl/ossl_typ.h
+app_rand.o: ../include/openssl/pkcs7.h ../include/openssl/rand.h
+app_rand.o: ../include/openssl/safestack.h ../include/openssl/sha.h
+app_rand.o: ../include/openssl/stack.h ../include/openssl/symhacks.h
+app_rand.o: ../include/openssl/txt_db.h ../include/openssl/x509.h
+app_rand.o: ../include/openssl/x509_vfy.h app_rand.c apps.h
+apps.o: ../e_os.h ../include/openssl/asn1.h ../include/openssl/bio.h
+apps.o: ../include/openssl/bn.h ../include/openssl/buffer.h
+apps.o: ../include/openssl/conf.h ../include/openssl/crypto.h
+apps.o: ../include/openssl/e_os2.h ../include/openssl/ec.h
+apps.o: ../include/openssl/ecdh.h ../include/openssl/ecdsa.h
+apps.o: ../include/openssl/engine.h ../include/openssl/err.h
+apps.o: ../include/openssl/evp.h ../include/openssl/fips.h
+apps.o: ../include/openssl/lhash.h ../include/openssl/obj_mac.h
+apps.o: ../include/openssl/objects.h ../include/openssl/opensslconf.h
+apps.o: ../include/openssl/opensslv.h ../include/openssl/ossl_typ.h
+apps.o: ../include/openssl/pem.h ../include/openssl/pem2.h
+apps.o: ../include/openssl/pkcs12.h ../include/openssl/pkcs7.h
+apps.o: ../include/openssl/rsa.h ../include/openssl/safestack.h
+apps.o: ../include/openssl/sha.h ../include/openssl/stack.h
+apps.o: ../include/openssl/symhacks.h ../include/openssl/txt_db.h
+apps.o: ../include/openssl/ui.h ../include/openssl/x509.h
+apps.o: ../include/openssl/x509_vfy.h ../include/openssl/x509v3.h apps.c apps.h
+asn1pars.o: ../e_os.h ../include/openssl/asn1.h ../include/openssl/bio.h
+asn1pars.o: ../include/openssl/buffer.h ../include/openssl/conf.h
+asn1pars.o: ../include/openssl/crypto.h ../include/openssl/e_os2.h
+asn1pars.o: ../include/openssl/ec.h ../include/openssl/ecdh.h
+asn1pars.o: ../include/openssl/ecdsa.h ../include/openssl/engine.h
+asn1pars.o: ../include/openssl/err.h ../include/openssl/evp.h
+asn1pars.o: ../include/openssl/fips.h ../include/openssl/lhash.h
+asn1pars.o: ../include/openssl/obj_mac.h ../include/openssl/objects.h
+asn1pars.o: ../include/openssl/opensslconf.h ../include/openssl/opensslv.h
+asn1pars.o: ../include/openssl/ossl_typ.h ../include/openssl/pem.h
+asn1pars.o: ../include/openssl/pem2.h ../include/openssl/pkcs7.h
+asn1pars.o: ../include/openssl/safestack.h ../include/openssl/sha.h
+asn1pars.o: ../include/openssl/stack.h ../include/openssl/symhacks.h
+asn1pars.o: ../include/openssl/txt_db.h ../include/openssl/x509.h
+asn1pars.o: ../include/openssl/x509_vfy.h apps.h asn1pars.c
+ca.o: ../e_os.h ../include/openssl/asn1.h ../include/openssl/bio.h
+ca.o: ../include/openssl/bn.h ../include/openssl/buffer.h
+ca.o: ../include/openssl/conf.h ../include/openssl/crypto.h
+ca.o: ../include/openssl/e_os2.h ../include/openssl/ec.h
+ca.o: ../include/openssl/ecdh.h ../include/openssl/ecdsa.h
+ca.o: ../include/openssl/engine.h ../include/openssl/err.h
+ca.o: ../include/openssl/evp.h ../include/openssl/fips.h
+ca.o: ../include/openssl/lhash.h ../include/openssl/obj_mac.h
+ca.o: ../include/openssl/objects.h ../include/openssl/ocsp.h
+ca.o: ../include/openssl/opensslconf.h ../include/openssl/opensslv.h
+ca.o: ../include/openssl/ossl_typ.h ../include/openssl/pem.h
+ca.o: ../include/openssl/pem2.h ../include/openssl/pkcs7.h
+ca.o: ../include/openssl/safestack.h ../include/openssl/sha.h
+ca.o: ../include/openssl/stack.h ../include/openssl/symhacks.h
+ca.o: ../include/openssl/txt_db.h ../include/openssl/x509.h
+ca.o: ../include/openssl/x509_vfy.h ../include/openssl/x509v3.h apps.h ca.c
+ciphers.o: ../e_os.h ../include/openssl/asn1.h ../include/openssl/bio.h
+ciphers.o: ../include/openssl/bn.h ../include/openssl/buffer.h
+ciphers.o: ../include/openssl/comp.h ../include/openssl/conf.h
+ciphers.o: ../include/openssl/crypto.h ../include/openssl/dtls1.h
+ciphers.o: ../include/openssl/e_os2.h ../include/openssl/ec.h
+ciphers.o: ../include/openssl/ecdh.h ../include/openssl/ecdsa.h
+ciphers.o: ../include/openssl/engine.h ../include/openssl/err.h
+ciphers.o: ../include/openssl/evp.h ../include/openssl/fips.h
+ciphers.o: ../include/openssl/kssl.h ../include/openssl/lhash.h
+ciphers.o: ../include/openssl/obj_mac.h ../include/openssl/objects.h
+ciphers.o: ../include/openssl/opensslconf.h ../include/openssl/opensslv.h
+ciphers.o: ../include/openssl/ossl_typ.h ../include/openssl/pem.h
+ciphers.o: ../include/openssl/pem2.h ../include/openssl/pkcs7.h
+ciphers.o: ../include/openssl/pq_compat.h ../include/openssl/pqueue.h
+ciphers.o: ../include/openssl/safestack.h ../include/openssl/sha.h
+ciphers.o: ../include/openssl/ssl.h ../include/openssl/ssl2.h
+ciphers.o: ../include/openssl/ssl23.h ../include/openssl/ssl3.h
+ciphers.o: ../include/openssl/stack.h ../include/openssl/symhacks.h
+ciphers.o: ../include/openssl/tls1.h ../include/openssl/txt_db.h
+ciphers.o: ../include/openssl/x509.h ../include/openssl/x509_vfy.h apps.h
+ciphers.o: ciphers.c
+crl.o: ../e_os.h ../include/openssl/asn1.h ../include/openssl/bio.h
+crl.o: ../include/openssl/buffer.h ../include/openssl/conf.h
+crl.o: ../include/openssl/crypto.h ../include/openssl/e_os2.h
+crl.o: ../include/openssl/ec.h ../include/openssl/ecdh.h
+crl.o: ../include/openssl/ecdsa.h ../include/openssl/engine.h
+crl.o: ../include/openssl/err.h ../include/openssl/evp.h
+crl.o: ../include/openssl/fips.h ../include/openssl/lhash.h
+crl.o: ../include/openssl/obj_mac.h ../include/openssl/objects.h
+crl.o: ../include/openssl/opensslconf.h ../include/openssl/opensslv.h
+crl.o: ../include/openssl/ossl_typ.h ../include/openssl/pem.h
+crl.o: ../include/openssl/pem2.h ../include/openssl/pkcs7.h
+crl.o: ../include/openssl/safestack.h ../include/openssl/sha.h
+crl.o: ../include/openssl/stack.h ../include/openssl/symhacks.h
+crl.o: ../include/openssl/txt_db.h ../include/openssl/x509.h
+crl.o: ../include/openssl/x509_vfy.h ../include/openssl/x509v3.h apps.h crl.c
+crl2p7.o: ../e_os.h ../include/openssl/asn1.h ../include/openssl/bio.h
+crl2p7.o: ../include/openssl/buffer.h ../include/openssl/conf.h
+crl2p7.o: ../include/openssl/crypto.h ../include/openssl/e_os2.h
+crl2p7.o: ../include/openssl/ec.h ../include/openssl/ecdh.h
+crl2p7.o: ../include/openssl/ecdsa.h ../include/openssl/engine.h
+crl2p7.o: ../include/openssl/err.h ../include/openssl/evp.h
+crl2p7.o: ../include/openssl/fips.h ../include/openssl/lhash.h
+crl2p7.o: ../include/openssl/obj_mac.h ../include/openssl/objects.h
+crl2p7.o: ../include/openssl/opensslconf.h ../include/openssl/opensslv.h
+crl2p7.o: ../include/openssl/ossl_typ.h ../include/openssl/pem.h
+crl2p7.o: ../include/openssl/pem2.h ../include/openssl/pkcs7.h
+crl2p7.o: ../include/openssl/safestack.h ../include/openssl/sha.h
+crl2p7.o: ../include/openssl/stack.h ../include/openssl/symhacks.h
+crl2p7.o: ../include/openssl/txt_db.h ../include/openssl/x509.h
+crl2p7.o: ../include/openssl/x509_vfy.h apps.h crl2p7.c
+dgst.o: ../e_os.h ../include/openssl/asn1.h ../include/openssl/bio.h
+dgst.o: ../include/openssl/buffer.h ../include/openssl/conf.h
+dgst.o: ../include/openssl/crypto.h ../include/openssl/e_os2.h
+dgst.o: ../include/openssl/ec.h ../include/openssl/ecdh.h
+dgst.o: ../include/openssl/ecdsa.h ../include/openssl/engine.h
+dgst.o: ../include/openssl/err.h ../include/openssl/evp.h
+dgst.o: ../include/openssl/fips.h ../include/openssl/hmac.h
+dgst.o: ../include/openssl/lhash.h ../include/openssl/obj_mac.h
+dgst.o: ../include/openssl/objects.h ../include/openssl/opensslconf.h
+dgst.o: ../include/openssl/opensslv.h ../include/openssl/ossl_typ.h
+dgst.o: ../include/openssl/pem.h ../include/openssl/pem2.h
+dgst.o: ../include/openssl/pkcs7.h ../include/openssl/safestack.h
+dgst.o: ../include/openssl/sha.h ../include/openssl/stack.h
+dgst.o: ../include/openssl/symhacks.h ../include/openssl/txt_db.h
+dgst.o: ../include/openssl/x509.h ../include/openssl/x509_vfy.h apps.h dgst.c
+dh.o: ../e_os.h ../include/openssl/asn1.h ../include/openssl/bio.h
+dh.o: ../include/openssl/bn.h ../include/openssl/buffer.h
+dh.o: ../include/openssl/conf.h ../include/openssl/crypto.h
+dh.o: ../include/openssl/dh.h ../include/openssl/e_os2.h
+dh.o: ../include/openssl/ec.h ../include/openssl/ecdh.h
+dh.o: ../include/openssl/ecdsa.h ../include/openssl/engine.h
+dh.o: ../include/openssl/err.h ../include/openssl/evp.h
+dh.o: ../include/openssl/fips.h ../include/openssl/lhash.h
+dh.o: ../include/openssl/obj_mac.h ../include/openssl/objects.h
+dh.o: ../include/openssl/opensslconf.h ../include/openssl/opensslv.h
+dh.o: ../include/openssl/ossl_typ.h ../include/openssl/pem.h
+dh.o: ../include/openssl/pem2.h ../include/openssl/pkcs7.h
+dh.o: ../include/openssl/safestack.h ../include/openssl/sha.h
+dh.o: ../include/openssl/stack.h ../include/openssl/symhacks.h
+dh.o: ../include/openssl/txt_db.h ../include/openssl/x509.h
+dh.o: ../include/openssl/x509_vfy.h apps.h dh.c
+dsa.o: ../e_os.h ../include/openssl/asn1.h ../include/openssl/bio.h
+dsa.o: ../include/openssl/bn.h ../include/openssl/buffer.h
+dsa.o: ../include/openssl/conf.h ../include/openssl/crypto.h
+dsa.o: ../include/openssl/dsa.h ../include/openssl/e_os2.h
+dsa.o: ../include/openssl/ec.h ../include/openssl/ecdh.h
+dsa.o: ../include/openssl/ecdsa.h ../include/openssl/engine.h
+dsa.o: ../include/openssl/err.h ../include/openssl/evp.h
+dsa.o: ../include/openssl/fips.h ../include/openssl/lhash.h
+dsa.o: ../include/openssl/obj_mac.h ../include/openssl/objects.h
+dsa.o: ../include/openssl/opensslconf.h ../include/openssl/opensslv.h
+dsa.o: ../include/openssl/ossl_typ.h ../include/openssl/pem.h
+dsa.o: ../include/openssl/pem2.h ../include/openssl/pkcs7.h
+dsa.o: ../include/openssl/safestack.h ../include/openssl/sha.h
+dsa.o: ../include/openssl/stack.h ../include/openssl/symhacks.h
+dsa.o: ../include/openssl/txt_db.h ../include/openssl/x509.h
+dsa.o: ../include/openssl/x509_vfy.h apps.h dsa.c
+dsaparam.o: ../e_os.h ../include/openssl/asn1.h ../include/openssl/bio.h
+dsaparam.o: ../include/openssl/bn.h ../include/openssl/buffer.h
+dsaparam.o: ../include/openssl/conf.h ../include/openssl/crypto.h
+dsaparam.o: ../include/openssl/dh.h ../include/openssl/dsa.h
+dsaparam.o: ../include/openssl/e_os2.h ../include/openssl/ec.h
+dsaparam.o: ../include/openssl/ecdh.h ../include/openssl/ecdsa.h
+dsaparam.o: ../include/openssl/engine.h ../include/openssl/err.h
+dsaparam.o: ../include/openssl/evp.h ../include/openssl/fips.h
+dsaparam.o: ../include/openssl/lhash.h ../include/openssl/obj_mac.h
+dsaparam.o: ../include/openssl/objects.h ../include/openssl/opensslconf.h
+dsaparam.o: ../include/openssl/opensslv.h ../include/openssl/ossl_typ.h
+dsaparam.o: ../include/openssl/pem.h ../include/openssl/pem2.h
+dsaparam.o: ../include/openssl/pkcs7.h ../include/openssl/rand.h
+dsaparam.o: ../include/openssl/rsa.h ../include/openssl/safestack.h
+dsaparam.o: ../include/openssl/sha.h ../include/openssl/stack.h
+dsaparam.o: ../include/openssl/store.h ../include/openssl/symhacks.h
+dsaparam.o: ../include/openssl/txt_db.h ../include/openssl/ui.h
+dsaparam.o: ../include/openssl/x509.h ../include/openssl/x509_vfy.h apps.h
+dsaparam.o: dsaparam.c
+ec.o: ../e_os.h ../include/openssl/asn1.h ../include/openssl/bio.h
+ec.o: ../include/openssl/buffer.h ../include/openssl/conf.h
+ec.o: ../include/openssl/crypto.h ../include/openssl/e_os2.h
+ec.o: ../include/openssl/ec.h ../include/openssl/ecdh.h
+ec.o: ../include/openssl/ecdsa.h ../include/openssl/engine.h
+ec.o: ../include/openssl/err.h ../include/openssl/evp.h
+ec.o: ../include/openssl/fips.h ../include/openssl/lhash.h
+ec.o: ../include/openssl/obj_mac.h ../include/openssl/objects.h
+ec.o: ../include/openssl/opensslconf.h ../include/openssl/opensslv.h
+ec.o: ../include/openssl/ossl_typ.h ../include/openssl/pem.h
+ec.o: ../include/openssl/pem2.h ../include/openssl/pkcs7.h
+ec.o: ../include/openssl/safestack.h ../include/openssl/sha.h
+ec.o: ../include/openssl/stack.h ../include/openssl/symhacks.h
+ec.o: ../include/openssl/txt_db.h ../include/openssl/x509.h
+ec.o: ../include/openssl/x509_vfy.h apps.h ec.c
+ecparam.o: ../e_os.h ../include/openssl/asn1.h ../include/openssl/bio.h
+ecparam.o: ../include/openssl/bn.h ../include/openssl/buffer.h
+ecparam.o: ../include/openssl/conf.h ../include/openssl/crypto.h
+ecparam.o: ../include/openssl/e_os2.h ../include/openssl/ec.h
+ecparam.o: ../include/openssl/ecdh.h ../include/openssl/ecdsa.h
+ecparam.o: ../include/openssl/engine.h ../include/openssl/err.h
+ecparam.o: ../include/openssl/evp.h ../include/openssl/fips.h
+ecparam.o: ../include/openssl/lhash.h ../include/openssl/obj_mac.h
+ecparam.o: ../include/openssl/objects.h ../include/openssl/opensslconf.h
+ecparam.o: ../include/openssl/opensslv.h ../include/openssl/ossl_typ.h
+ecparam.o: ../include/openssl/pem.h ../include/openssl/pem2.h
+ecparam.o: ../include/openssl/pkcs7.h ../include/openssl/safestack.h
+ecparam.o: ../include/openssl/sha.h ../include/openssl/stack.h
+ecparam.o: ../include/openssl/symhacks.h ../include/openssl/txt_db.h
+ecparam.o: ../include/openssl/x509.h ../include/openssl/x509_vfy.h apps.h
+ecparam.o: ecparam.c
+enc.o: ../e_os.h ../include/openssl/asn1.h ../include/openssl/bio.h
+enc.o: ../include/openssl/buffer.h ../include/openssl/conf.h
+enc.o: ../include/openssl/crypto.h ../include/openssl/e_os2.h
+enc.o: ../include/openssl/ec.h ../include/openssl/ecdh.h
+enc.o: ../include/openssl/ecdsa.h ../include/openssl/engine.h
+enc.o: ../include/openssl/err.h ../include/openssl/evp.h
+enc.o: ../include/openssl/fips.h ../include/openssl/lhash.h
+enc.o: ../include/openssl/obj_mac.h ../include/openssl/objects.h
+enc.o: ../include/openssl/opensslconf.h ../include/openssl/opensslv.h
+enc.o: ../include/openssl/ossl_typ.h ../include/openssl/pem.h
+enc.o: ../include/openssl/pem2.h ../include/openssl/pkcs7.h
+enc.o: ../include/openssl/rand.h ../include/openssl/safestack.h
+enc.o: ../include/openssl/sha.h ../include/openssl/stack.h
+enc.o: ../include/openssl/symhacks.h ../include/openssl/txt_db.h
+enc.o: ../include/openssl/x509.h ../include/openssl/x509_vfy.h apps.h enc.c
+engine.o: ../e_os.h ../include/openssl/asn1.h ../include/openssl/bio.h
+engine.o: ../include/openssl/bn.h ../include/openssl/buffer.h
+engine.o: ../include/openssl/comp.h ../include/openssl/conf.h
+engine.o: ../include/openssl/crypto.h ../include/openssl/dtls1.h
+engine.o: ../include/openssl/e_os2.h ../include/openssl/ec.h
+engine.o: ../include/openssl/ecdh.h ../include/openssl/ecdsa.h
+engine.o: ../include/openssl/engine.h ../include/openssl/err.h
+engine.o: ../include/openssl/evp.h ../include/openssl/fips.h
+engine.o: ../include/openssl/kssl.h ../include/openssl/lhash.h
+engine.o: ../include/openssl/obj_mac.h ../include/openssl/objects.h
+engine.o: ../include/openssl/opensslconf.h ../include/openssl/opensslv.h
+engine.o: ../include/openssl/ossl_typ.h ../include/openssl/pem.h
+engine.o: ../include/openssl/pem2.h ../include/openssl/pkcs7.h
+engine.o: ../include/openssl/pq_compat.h ../include/openssl/pqueue.h
+engine.o: ../include/openssl/safestack.h ../include/openssl/sha.h
+engine.o: ../include/openssl/ssl.h ../include/openssl/ssl2.h
+engine.o: ../include/openssl/ssl23.h ../include/openssl/ssl3.h
+engine.o: ../include/openssl/stack.h ../include/openssl/symhacks.h
+engine.o: ../include/openssl/tls1.h ../include/openssl/txt_db.h
+engine.o: ../include/openssl/x509.h ../include/openssl/x509_vfy.h apps.h
+engine.o: engine.c
+errstr.o: ../e_os.h ../include/openssl/asn1.h ../include/openssl/bio.h
+errstr.o: ../include/openssl/bn.h ../include/openssl/buffer.h
+errstr.o: ../include/openssl/comp.h ../include/openssl/conf.h
+errstr.o: ../include/openssl/crypto.h ../include/openssl/dtls1.h
+errstr.o: ../include/openssl/e_os2.h ../include/openssl/ec.h
+errstr.o: ../include/openssl/ecdh.h ../include/openssl/ecdsa.h
+errstr.o: ../include/openssl/engine.h ../include/openssl/err.h
+errstr.o: ../include/openssl/evp.h ../include/openssl/fips.h
+errstr.o: ../include/openssl/kssl.h ../include/openssl/lhash.h
+errstr.o: ../include/openssl/obj_mac.h ../include/openssl/objects.h
+errstr.o: ../include/openssl/opensslconf.h ../include/openssl/opensslv.h
+errstr.o: ../include/openssl/ossl_typ.h ../include/openssl/pem.h
+errstr.o: ../include/openssl/pem2.h ../include/openssl/pkcs7.h
+errstr.o: ../include/openssl/pq_compat.h ../include/openssl/pqueue.h
+errstr.o: ../include/openssl/safestack.h ../include/openssl/sha.h
+errstr.o: ../include/openssl/ssl.h ../include/openssl/ssl2.h
+errstr.o: ../include/openssl/ssl23.h ../include/openssl/ssl3.h
+errstr.o: ../include/openssl/stack.h ../include/openssl/symhacks.h
+errstr.o: ../include/openssl/tls1.h ../include/openssl/txt_db.h
+errstr.o: ../include/openssl/x509.h ../include/openssl/x509_vfy.h apps.h
+errstr.o: errstr.c
+gendh.o: ../e_os.h ../include/openssl/asn1.h ../include/openssl/bio.h
+gendh.o: ../include/openssl/bn.h ../include/openssl/buffer.h
+gendh.o: ../include/openssl/conf.h ../include/openssl/crypto.h
+gendh.o: ../include/openssl/dh.h ../include/openssl/dsa.h
+gendh.o: ../include/openssl/e_os2.h ../include/openssl/ec.h
+gendh.o: ../include/openssl/ecdh.h ../include/openssl/ecdsa.h
+gendh.o: ../include/openssl/engine.h ../include/openssl/err.h
+gendh.o: ../include/openssl/evp.h ../include/openssl/fips.h
+gendh.o: ../include/openssl/lhash.h ../include/openssl/obj_mac.h
+gendh.o: ../include/openssl/objects.h ../include/openssl/opensslconf.h
+gendh.o: ../include/openssl/opensslv.h ../include/openssl/ossl_typ.h
+gendh.o: ../include/openssl/pem.h ../include/openssl/pem2.h
+gendh.o: ../include/openssl/pkcs7.h ../include/openssl/rand.h
+gendh.o: ../include/openssl/rsa.h ../include/openssl/safestack.h
+gendh.o: ../include/openssl/sha.h ../include/openssl/stack.h
+gendh.o: ../include/openssl/store.h ../include/openssl/symhacks.h
+gendh.o: ../include/openssl/txt_db.h ../include/openssl/ui.h
+gendh.o: ../include/openssl/x509.h ../include/openssl/x509_vfy.h apps.h gendh.c
+gendsa.o: ../e_os.h ../include/openssl/asn1.h ../include/openssl/bio.h
+gendsa.o: ../include/openssl/bn.h ../include/openssl/buffer.h
+gendsa.o: ../include/openssl/conf.h ../include/openssl/crypto.h
+gendsa.o: ../include/openssl/dsa.h ../include/openssl/e_os2.h
+gendsa.o: ../include/openssl/ec.h ../include/openssl/ecdh.h
+gendsa.o: ../include/openssl/ecdsa.h ../include/openssl/engine.h
+gendsa.o: ../include/openssl/err.h ../include/openssl/evp.h
+gendsa.o: ../include/openssl/fips.h ../include/openssl/lhash.h
+gendsa.o: ../include/openssl/obj_mac.h ../include/openssl/objects.h
+gendsa.o: ../include/openssl/opensslconf.h ../include/openssl/opensslv.h
+gendsa.o: ../include/openssl/ossl_typ.h ../include/openssl/pem.h
+gendsa.o: ../include/openssl/pem2.h ../include/openssl/pkcs7.h
+gendsa.o: ../include/openssl/safestack.h ../include/openssl/sha.h
+gendsa.o: ../include/openssl/stack.h ../include/openssl/symhacks.h
+gendsa.o: ../include/openssl/txt_db.h ../include/openssl/x509.h
+gendsa.o: ../include/openssl/x509_vfy.h apps.h gendsa.c
+genrsa.o: ../e_os.h ../include/openssl/asn1.h ../include/openssl/bio.h
+genrsa.o: ../include/openssl/bn.h ../include/openssl/buffer.h
+genrsa.o: ../include/openssl/conf.h ../include/openssl/crypto.h
+genrsa.o: ../include/openssl/dh.h ../include/openssl/dsa.h
+genrsa.o: ../include/openssl/e_os2.h ../include/openssl/ec.h
+genrsa.o: ../include/openssl/ecdh.h ../include/openssl/ecdsa.h
+genrsa.o: ../include/openssl/engine.h ../include/openssl/err.h
+genrsa.o: ../include/openssl/evp.h ../include/openssl/fips.h
+genrsa.o: ../include/openssl/lhash.h ../include/openssl/obj_mac.h
+genrsa.o: ../include/openssl/objects.h ../include/openssl/opensslconf.h
+genrsa.o: ../include/openssl/opensslv.h ../include/openssl/ossl_typ.h
+genrsa.o: ../include/openssl/pem.h ../include/openssl/pem2.h
+genrsa.o: ../include/openssl/pkcs7.h ../include/openssl/rand.h
+genrsa.o: ../include/openssl/rsa.h ../include/openssl/safestack.h
+genrsa.o: ../include/openssl/sha.h ../include/openssl/stack.h
+genrsa.o: ../include/openssl/store.h ../include/openssl/symhacks.h
+genrsa.o: ../include/openssl/txt_db.h ../include/openssl/ui.h
+genrsa.o: ../include/openssl/x509.h ../include/openssl/x509_vfy.h apps.h
+genrsa.o: genrsa.c
+nseq.o: ../e_os.h ../include/openssl/asn1.h ../include/openssl/bio.h
+nseq.o: ../include/openssl/buffer.h ../include/openssl/conf.h
+nseq.o: ../include/openssl/crypto.h ../include/openssl/e_os2.h
+nseq.o: ../include/openssl/ec.h ../include/openssl/ecdh.h
+nseq.o: ../include/openssl/ecdsa.h ../include/openssl/engine.h
+nseq.o: ../include/openssl/err.h ../include/openssl/evp.h
+nseq.o: ../include/openssl/fips.h ../include/openssl/lhash.h
+nseq.o: ../include/openssl/obj_mac.h ../include/openssl/objects.h
+nseq.o: ../include/openssl/opensslconf.h ../include/openssl/opensslv.h
+nseq.o: ../include/openssl/ossl_typ.h ../include/openssl/pem.h
+nseq.o: ../include/openssl/pem2.h ../include/openssl/pkcs7.h
+nseq.o: ../include/openssl/safestack.h ../include/openssl/sha.h
+nseq.o: ../include/openssl/stack.h ../include/openssl/symhacks.h
+nseq.o: ../include/openssl/txt_db.h ../include/openssl/x509.h
+nseq.o: ../include/openssl/x509_vfy.h apps.h nseq.c
+ocsp.o: ../e_os.h ../include/openssl/asn1.h ../include/openssl/bio.h
+ocsp.o: ../include/openssl/bn.h ../include/openssl/buffer.h
+ocsp.o: ../include/openssl/comp.h ../include/openssl/conf.h
+ocsp.o: ../include/openssl/crypto.h ../include/openssl/dtls1.h
+ocsp.o: ../include/openssl/e_os2.h ../include/openssl/ec.h
+ocsp.o: ../include/openssl/ecdh.h ../include/openssl/ecdsa.h
+ocsp.o: ../include/openssl/engine.h ../include/openssl/err.h
+ocsp.o: ../include/openssl/evp.h ../include/openssl/fips.h
+ocsp.o: ../include/openssl/kssl.h ../include/openssl/lhash.h
+ocsp.o: ../include/openssl/obj_mac.h ../include/openssl/objects.h
+ocsp.o: ../include/openssl/ocsp.h ../include/openssl/opensslconf.h
+ocsp.o: ../include/openssl/opensslv.h ../include/openssl/ossl_typ.h
+ocsp.o: ../include/openssl/pem.h ../include/openssl/pem2.h
+ocsp.o: ../include/openssl/pkcs7.h ../include/openssl/pq_compat.h
+ocsp.o: ../include/openssl/pqueue.h ../include/openssl/safestack.h
+ocsp.o: ../include/openssl/sha.h ../include/openssl/ssl.h
+ocsp.o: ../include/openssl/ssl2.h ../include/openssl/ssl23.h
+ocsp.o: ../include/openssl/ssl3.h ../include/openssl/stack.h
+ocsp.o: ../include/openssl/symhacks.h ../include/openssl/tls1.h
+ocsp.o: ../include/openssl/txt_db.h ../include/openssl/x509.h
+ocsp.o: ../include/openssl/x509_vfy.h ../include/openssl/x509v3.h apps.h ocsp.c
+openssl.o: ../e_os.h ../include/openssl/asn1.h ../include/openssl/bio.h
+openssl.o: ../include/openssl/bn.h ../include/openssl/buffer.h
+openssl.o: ../include/openssl/comp.h ../include/openssl/conf.h
+openssl.o: ../include/openssl/crypto.h ../include/openssl/dtls1.h
+openssl.o: ../include/openssl/e_os2.h ../include/openssl/ec.h
+openssl.o: ../include/openssl/ecdh.h ../include/openssl/ecdsa.h
+openssl.o: ../include/openssl/engine.h ../include/openssl/err.h
+openssl.o: ../include/openssl/evp.h ../include/openssl/fips.h
+openssl.o: ../include/openssl/kssl.h ../include/openssl/lhash.h
+openssl.o: ../include/openssl/obj_mac.h ../include/openssl/objects.h
+openssl.o: ../include/openssl/opensslconf.h ../include/openssl/opensslv.h
+openssl.o: ../include/openssl/ossl_typ.h ../include/openssl/pem.h
+openssl.o: ../include/openssl/pem2.h ../include/openssl/pkcs7.h
+openssl.o: ../include/openssl/pq_compat.h ../include/openssl/pqueue.h
+openssl.o: ../include/openssl/safestack.h ../include/openssl/sha.h
+openssl.o: ../include/openssl/ssl.h ../include/openssl/ssl2.h
+openssl.o: ../include/openssl/ssl23.h ../include/openssl/ssl3.h
+openssl.o: ../include/openssl/stack.h ../include/openssl/symhacks.h
+openssl.o: ../include/openssl/tls1.h ../include/openssl/txt_db.h
+openssl.o: ../include/openssl/x509.h ../include/openssl/x509_vfy.h apps.h
+openssl.o: openssl.c progs.h s_apps.h
+passwd.o: ../e_os.h ../include/openssl/asn1.h ../include/openssl/bio.h
+passwd.o: ../include/openssl/buffer.h ../include/openssl/conf.h
+passwd.o: ../include/openssl/crypto.h ../include/openssl/des.h
+passwd.o: ../include/openssl/des_old.h ../include/openssl/e_os2.h
+passwd.o: ../include/openssl/ec.h ../include/openssl/ecdh.h
+passwd.o: ../include/openssl/ecdsa.h ../include/openssl/engine.h
+passwd.o: ../include/openssl/err.h ../include/openssl/evp.h
+passwd.o: ../include/openssl/fips.h ../include/openssl/lhash.h
+passwd.o: ../include/openssl/md5.h ../include/openssl/obj_mac.h
+passwd.o: ../include/openssl/objects.h ../include/openssl/opensslconf.h
+passwd.o: ../include/openssl/opensslv.h ../include/openssl/ossl_typ.h
+passwd.o: ../include/openssl/pkcs7.h ../include/openssl/rand.h
+passwd.o: ../include/openssl/safestack.h ../include/openssl/sha.h
+passwd.o: ../include/openssl/stack.h ../include/openssl/symhacks.h
+passwd.o: ../include/openssl/txt_db.h ../include/openssl/ui.h
+passwd.o: ../include/openssl/ui_compat.h ../include/openssl/x509.h
+passwd.o: ../include/openssl/x509_vfy.h apps.h passwd.c
+pkcs12.o: ../e_os.h ../include/openssl/asn1.h ../include/openssl/bio.h
+pkcs12.o: ../include/openssl/buffer.h ../include/openssl/conf.h
+pkcs12.o: ../include/openssl/crypto.h ../include/openssl/e_os2.h
+pkcs12.o: ../include/openssl/ec.h ../include/openssl/ecdh.h
+pkcs12.o: ../include/openssl/ecdsa.h ../include/openssl/engine.h
+pkcs12.o: ../include/openssl/err.h ../include/openssl/evp.h
+pkcs12.o: ../include/openssl/fips.h ../include/openssl/lhash.h
+pkcs12.o: ../include/openssl/obj_mac.h ../include/openssl/objects.h
+pkcs12.o: ../include/openssl/opensslconf.h ../include/openssl/opensslv.h
+pkcs12.o: ../include/openssl/ossl_typ.h ../include/openssl/pem.h
+pkcs12.o: ../include/openssl/pem2.h ../include/openssl/pkcs12.h
+pkcs12.o: ../include/openssl/pkcs7.h ../include/openssl/safestack.h
+pkcs12.o: ../include/openssl/sha.h ../include/openssl/stack.h
+pkcs12.o: ../include/openssl/symhacks.h ../include/openssl/txt_db.h
+pkcs12.o: ../include/openssl/x509.h ../include/openssl/x509_vfy.h apps.h
+pkcs12.o: pkcs12.c
+pkcs7.o: ../e_os.h ../include/openssl/asn1.h ../include/openssl/bio.h
+pkcs7.o: ../include/openssl/buffer.h ../include/openssl/conf.h
+pkcs7.o: ../include/openssl/crypto.h ../include/openssl/e_os2.h
+pkcs7.o: ../include/openssl/ec.h ../include/openssl/ecdh.h
+pkcs7.o: ../include/openssl/ecdsa.h ../include/openssl/engine.h
+pkcs7.o: ../include/openssl/err.h ../include/openssl/evp.h
+pkcs7.o: ../include/openssl/fips.h ../include/openssl/lhash.h
+pkcs7.o: ../include/openssl/obj_mac.h ../include/openssl/objects.h
+pkcs7.o: ../include/openssl/opensslconf.h ../include/openssl/opensslv.h
+pkcs7.o: ../include/openssl/ossl_typ.h ../include/openssl/pem.h
+pkcs7.o: ../include/openssl/pem2.h ../include/openssl/pkcs7.h
+pkcs7.o: ../include/openssl/safestack.h ../include/openssl/sha.h
+pkcs7.o: ../include/openssl/stack.h ../include/openssl/symhacks.h
+pkcs7.o: ../include/openssl/txt_db.h ../include/openssl/x509.h
+pkcs7.o: ../include/openssl/x509_vfy.h apps.h pkcs7.c
+pkcs8.o: ../e_os.h ../include/openssl/asn1.h ../include/openssl/bio.h
+pkcs8.o: ../include/openssl/buffer.h ../include/openssl/conf.h
+pkcs8.o: ../include/openssl/crypto.h ../include/openssl/e_os2.h
+pkcs8.o: ../include/openssl/ec.h ../include/openssl/ecdh.h
+pkcs8.o: ../include/openssl/ecdsa.h ../include/openssl/engine.h
+pkcs8.o: ../include/openssl/err.h ../include/openssl/evp.h
+pkcs8.o: ../include/openssl/fips.h ../include/openssl/lhash.h
+pkcs8.o: ../include/openssl/obj_mac.h ../include/openssl/objects.h
+pkcs8.o: ../include/openssl/opensslconf.h ../include/openssl/opensslv.h
+pkcs8.o: ../include/openssl/ossl_typ.h ../include/openssl/pem.h
+pkcs8.o: ../include/openssl/pem2.h ../include/openssl/pkcs12.h
+pkcs8.o: ../include/openssl/pkcs7.h ../include/openssl/safestack.h
+pkcs8.o: ../include/openssl/sha.h ../include/openssl/stack.h
+pkcs8.o: ../include/openssl/symhacks.h ../include/openssl/txt_db.h
+pkcs8.o: ../include/openssl/x509.h ../include/openssl/x509_vfy.h apps.h pkcs8.c
+prime.o: ../e_os.h ../include/openssl/asn1.h ../include/openssl/bio.h
+prime.o: ../include/openssl/bn.h ../include/openssl/buffer.h
+prime.o: ../include/openssl/conf.h ../include/openssl/crypto.h
+prime.o: ../include/openssl/e_os2.h ../include/openssl/ec.h
+prime.o: ../include/openssl/ecdh.h ../include/openssl/ecdsa.h
+prime.o: ../include/openssl/engine.h ../include/openssl/evp.h
+prime.o: ../include/openssl/fips.h ../include/openssl/lhash.h
+prime.o: ../include/openssl/obj_mac.h ../include/openssl/objects.h
+prime.o: ../include/openssl/opensslconf.h ../include/openssl/opensslv.h
+prime.o: ../include/openssl/ossl_typ.h ../include/openssl/pkcs7.h
+prime.o: ../include/openssl/safestack.h ../include/openssl/sha.h
+prime.o: ../include/openssl/stack.h ../include/openssl/symhacks.h
+prime.o: ../include/openssl/txt_db.h ../include/openssl/x509.h
+prime.o: ../include/openssl/x509_vfy.h apps.h prime.c
+rand.o: ../e_os.h ../include/openssl/asn1.h ../include/openssl/bio.h
+rand.o: ../include/openssl/buffer.h ../include/openssl/conf.h
+rand.o: ../include/openssl/crypto.h ../include/openssl/e_os2.h
+rand.o: ../include/openssl/ec.h ../include/openssl/ecdh.h
+rand.o: ../include/openssl/ecdsa.h ../include/openssl/engine.h
+rand.o: ../include/openssl/err.h ../include/openssl/evp.h
+rand.o: ../include/openssl/fips.h ../include/openssl/lhash.h
+rand.o: ../include/openssl/obj_mac.h ../include/openssl/objects.h
+rand.o: ../include/openssl/opensslconf.h ../include/openssl/opensslv.h
+rand.o: ../include/openssl/ossl_typ.h ../include/openssl/pkcs7.h
+rand.o: ../include/openssl/rand.h ../include/openssl/safestack.h
+rand.o: ../include/openssl/sha.h ../include/openssl/stack.h
+rand.o: ../include/openssl/symhacks.h ../include/openssl/txt_db.h
+rand.o: ../include/openssl/x509.h ../include/openssl/x509_vfy.h apps.h rand.c
+req.o: ../e_os.h ../include/openssl/asn1.h ../include/openssl/bio.h
+req.o: ../include/openssl/bn.h ../include/openssl/buffer.h
+req.o: ../include/openssl/conf.h ../include/openssl/crypto.h
+req.o: ../include/openssl/dh.h ../include/openssl/dsa.h
+req.o: ../include/openssl/e_os2.h ../include/openssl/ec.h
+req.o: ../include/openssl/ecdh.h ../include/openssl/ecdsa.h
+req.o: ../include/openssl/engine.h ../include/openssl/err.h
+req.o: ../include/openssl/evp.h ../include/openssl/fips.h
+req.o: ../include/openssl/lhash.h ../include/openssl/obj_mac.h
+req.o: ../include/openssl/objects.h ../include/openssl/opensslconf.h
+req.o: ../include/openssl/opensslv.h ../include/openssl/ossl_typ.h
+req.o: ../include/openssl/pem.h ../include/openssl/pem2.h
+req.o: ../include/openssl/pkcs7.h ../include/openssl/rand.h
+req.o: ../include/openssl/rsa.h ../include/openssl/safestack.h
+req.o: ../include/openssl/sha.h ../include/openssl/stack.h
+req.o: ../include/openssl/store.h ../include/openssl/symhacks.h
+req.o: ../include/openssl/txt_db.h ../include/openssl/ui.h
+req.o: ../include/openssl/x509.h ../include/openssl/x509_vfy.h
+req.o: ../include/openssl/x509v3.h apps.h req.c
+rsa.o: ../e_os.h ../include/openssl/asn1.h ../include/openssl/bio.h
+rsa.o: ../include/openssl/bn.h ../include/openssl/buffer.h
+rsa.o: ../include/openssl/conf.h ../include/openssl/crypto.h
+rsa.o: ../include/openssl/e_os2.h ../include/openssl/ec.h
+rsa.o: ../include/openssl/ecdh.h ../include/openssl/ecdsa.h
+rsa.o: ../include/openssl/engine.h ../include/openssl/err.h
+rsa.o: ../include/openssl/evp.h ../include/openssl/fips.h
+rsa.o: ../include/openssl/lhash.h ../include/openssl/obj_mac.h
+rsa.o: ../include/openssl/objects.h ../include/openssl/opensslconf.h
+rsa.o: ../include/openssl/opensslv.h ../include/openssl/ossl_typ.h
+rsa.o: ../include/openssl/pem.h ../include/openssl/pem2.h
+rsa.o: ../include/openssl/pkcs7.h ../include/openssl/rsa.h
+rsa.o: ../include/openssl/safestack.h ../include/openssl/sha.h
+rsa.o: ../include/openssl/stack.h ../include/openssl/symhacks.h
+rsa.o: ../include/openssl/txt_db.h ../include/openssl/x509.h
+rsa.o: ../include/openssl/x509_vfy.h apps.h rsa.c
+rsautl.o: ../e_os.h ../include/openssl/asn1.h ../include/openssl/bio.h
+rsautl.o: ../include/openssl/buffer.h ../include/openssl/conf.h
+rsautl.o: ../include/openssl/crypto.h ../include/openssl/e_os2.h
+rsautl.o: ../include/openssl/ec.h ../include/openssl/ecdh.h
+rsautl.o: ../include/openssl/ecdsa.h ../include/openssl/engine.h
+rsautl.o: ../include/openssl/err.h ../include/openssl/evp.h
+rsautl.o: ../include/openssl/fips.h ../include/openssl/lhash.h
+rsautl.o: ../include/openssl/obj_mac.h ../include/openssl/objects.h
+rsautl.o: ../include/openssl/opensslconf.h ../include/openssl/opensslv.h
+rsautl.o: ../include/openssl/ossl_typ.h ../include/openssl/pem.h
+rsautl.o: ../include/openssl/pem2.h ../include/openssl/pkcs7.h
+rsautl.o: ../include/openssl/rsa.h ../include/openssl/safestack.h
+rsautl.o: ../include/openssl/sha.h ../include/openssl/stack.h
+rsautl.o: ../include/openssl/symhacks.h ../include/openssl/txt_db.h
+rsautl.o: ../include/openssl/x509.h ../include/openssl/x509_vfy.h apps.h
+rsautl.o: rsautl.c
+s_cb.o: ../e_os.h ../include/openssl/asn1.h ../include/openssl/bio.h
+s_cb.o: ../include/openssl/bn.h ../include/openssl/buffer.h
+s_cb.o: ../include/openssl/comp.h ../include/openssl/conf.h
+s_cb.o: ../include/openssl/crypto.h ../include/openssl/dtls1.h
+s_cb.o: ../include/openssl/e_os2.h ../include/openssl/ec.h
+s_cb.o: ../include/openssl/ecdh.h ../include/openssl/ecdsa.h
+s_cb.o: ../include/openssl/engine.h ../include/openssl/err.h
+s_cb.o: ../include/openssl/evp.h ../include/openssl/fips.h
+s_cb.o: ../include/openssl/kssl.h ../include/openssl/lhash.h
+s_cb.o: ../include/openssl/obj_mac.h ../include/openssl/objects.h
+s_cb.o: ../include/openssl/opensslconf.h ../include/openssl/opensslv.h
+s_cb.o: ../include/openssl/ossl_typ.h ../include/openssl/pem.h
+s_cb.o: ../include/openssl/pem2.h ../include/openssl/pkcs7.h
+s_cb.o: ../include/openssl/pq_compat.h ../include/openssl/pqueue.h
+s_cb.o: ../include/openssl/safestack.h ../include/openssl/sha.h
+s_cb.o: ../include/openssl/ssl.h ../include/openssl/ssl2.h
+s_cb.o: ../include/openssl/ssl23.h ../include/openssl/ssl3.h
+s_cb.o: ../include/openssl/stack.h ../include/openssl/symhacks.h
+s_cb.o: ../include/openssl/tls1.h ../include/openssl/txt_db.h
+s_cb.o: ../include/openssl/x509.h ../include/openssl/x509_vfy.h apps.h s_apps.h
+s_cb.o: s_cb.c
+s_client.o: ../e_os.h ../include/openssl/asn1.h ../include/openssl/bio.h
+s_client.o: ../include/openssl/bn.h ../include/openssl/buffer.h
+s_client.o: ../include/openssl/comp.h ../include/openssl/conf.h
+s_client.o: ../include/openssl/crypto.h ../include/openssl/dtls1.h
+s_client.o: ../include/openssl/e_os2.h ../include/openssl/ec.h
+s_client.o: ../include/openssl/ecdh.h ../include/openssl/ecdsa.h
+s_client.o: ../include/openssl/engine.h ../include/openssl/err.h
+s_client.o: ../include/openssl/evp.h ../include/openssl/fips.h
+s_client.o: ../include/openssl/kssl.h ../include/openssl/lhash.h
+s_client.o: ../include/openssl/obj_mac.h ../include/openssl/objects.h
+s_client.o: ../include/openssl/opensslconf.h ../include/openssl/opensslv.h
+s_client.o: ../include/openssl/ossl_typ.h ../include/openssl/pem.h
+s_client.o: ../include/openssl/pem2.h ../include/openssl/pkcs7.h
+s_client.o: ../include/openssl/pq_compat.h ../include/openssl/pqueue.h
+s_client.o: ../include/openssl/rand.h ../include/openssl/safestack.h
+s_client.o: ../include/openssl/sha.h ../include/openssl/ssl.h
+s_client.o: ../include/openssl/ssl2.h ../include/openssl/ssl23.h
+s_client.o: ../include/openssl/ssl3.h ../include/openssl/stack.h
+s_client.o: ../include/openssl/symhacks.h ../include/openssl/tls1.h
+s_client.o: ../include/openssl/txt_db.h ../include/openssl/x509.h
+s_client.o: ../include/openssl/x509_vfy.h apps.h s_apps.h s_client.c timeouts.h
+s_server.o: ../e_os.h ../include/openssl/asn1.h ../include/openssl/bio.h
+s_server.o: ../include/openssl/bn.h ../include/openssl/buffer.h
+s_server.o: ../include/openssl/comp.h ../include/openssl/conf.h
+s_server.o: ../include/openssl/crypto.h ../include/openssl/dh.h
+s_server.o: ../include/openssl/dsa.h ../include/openssl/dtls1.h
+s_server.o: ../include/openssl/e_os2.h ../include/openssl/ec.h
+s_server.o: ../include/openssl/ecdh.h ../include/openssl/ecdsa.h
+s_server.o: ../include/openssl/engine.h ../include/openssl/err.h
+s_server.o: ../include/openssl/evp.h ../include/openssl/fips.h
+s_server.o: ../include/openssl/kssl.h ../include/openssl/lhash.h
+s_server.o: ../include/openssl/obj_mac.h ../include/openssl/objects.h
+s_server.o: ../include/openssl/opensslconf.h ../include/openssl/opensslv.h
+s_server.o: ../include/openssl/ossl_typ.h ../include/openssl/pem.h
+s_server.o: ../include/openssl/pem2.h ../include/openssl/pkcs7.h
+s_server.o: ../include/openssl/pq_compat.h ../include/openssl/pqueue.h
+s_server.o: ../include/openssl/rand.h ../include/openssl/rsa.h
+s_server.o: ../include/openssl/safestack.h ../include/openssl/sha.h
+s_server.o: ../include/openssl/ssl.h ../include/openssl/ssl2.h
+s_server.o: ../include/openssl/ssl23.h ../include/openssl/ssl3.h
+s_server.o: ../include/openssl/stack.h ../include/openssl/store.h
+s_server.o: ../include/openssl/symhacks.h ../include/openssl/tls1.h
+s_server.o: ../include/openssl/txt_db.h ../include/openssl/ui.h
+s_server.o: ../include/openssl/x509.h ../include/openssl/x509_vfy.h apps.h
+s_server.o: s_apps.h s_server.c timeouts.h
+s_socket.o: ../e_os.h ../include/openssl/asn1.h ../include/openssl/bio.h
+s_socket.o: ../include/openssl/bn.h ../include/openssl/buffer.h
+s_socket.o: ../include/openssl/comp.h ../include/openssl/conf.h
+s_socket.o: ../include/openssl/crypto.h ../include/openssl/dtls1.h
+s_socket.o: ../include/openssl/e_os2.h ../include/openssl/ec.h
+s_socket.o: ../include/openssl/ecdh.h ../include/openssl/ecdsa.h
+s_socket.o: ../include/openssl/engine.h ../include/openssl/evp.h
+s_socket.o: ../include/openssl/fips.h ../include/openssl/kssl.h
+s_socket.o: ../include/openssl/lhash.h ../include/openssl/obj_mac.h
+s_socket.o: ../include/openssl/objects.h ../include/openssl/opensslconf.h
+s_socket.o: ../include/openssl/opensslv.h ../include/openssl/ossl_typ.h
+s_socket.o: ../include/openssl/pem.h ../include/openssl/pem2.h
+s_socket.o: ../include/openssl/pkcs7.h ../include/openssl/pq_compat.h
+s_socket.o: ../include/openssl/pqueue.h ../include/openssl/safestack.h
+s_socket.o: ../include/openssl/sha.h ../include/openssl/ssl.h
+s_socket.o: ../include/openssl/ssl2.h ../include/openssl/ssl23.h
+s_socket.o: ../include/openssl/ssl3.h ../include/openssl/stack.h
+s_socket.o: ../include/openssl/symhacks.h ../include/openssl/tls1.h
+s_socket.o: ../include/openssl/txt_db.h ../include/openssl/x509.h
+s_socket.o: ../include/openssl/x509_vfy.h apps.h s_apps.h s_socket.c
+s_time.o: ../e_os.h ../include/openssl/asn1.h ../include/openssl/bio.h
+s_time.o: ../include/openssl/bn.h ../include/openssl/buffer.h
+s_time.o: ../include/openssl/comp.h ../include/openssl/conf.h
+s_time.o: ../include/openssl/crypto.h ../include/openssl/dtls1.h
+s_time.o: ../include/openssl/e_os2.h ../include/openssl/ec.h
+s_time.o: ../include/openssl/ecdh.h ../include/openssl/ecdsa.h
+s_time.o: ../include/openssl/engine.h ../include/openssl/err.h
+s_time.o: ../include/openssl/evp.h ../include/openssl/fips.h
+s_time.o: ../include/openssl/kssl.h ../include/openssl/lhash.h
+s_time.o: ../include/openssl/obj_mac.h ../include/openssl/objects.h
+s_time.o: ../include/openssl/opensslconf.h ../include/openssl/opensslv.h
+s_time.o: ../include/openssl/ossl_typ.h ../include/openssl/pem.h
+s_time.o: ../include/openssl/pem2.h ../include/openssl/pkcs7.h
+s_time.o: ../include/openssl/pq_compat.h ../include/openssl/pqueue.h
+s_time.o: ../include/openssl/safestack.h ../include/openssl/sha.h
+s_time.o: ../include/openssl/ssl.h ../include/openssl/ssl2.h
+s_time.o: ../include/openssl/ssl23.h ../include/openssl/ssl3.h
+s_time.o: ../include/openssl/stack.h ../include/openssl/symhacks.h
+s_time.o: ../include/openssl/tls1.h ../include/openssl/txt_db.h
+s_time.o: ../include/openssl/x509.h ../include/openssl/x509_vfy.h apps.h
+s_time.o: s_apps.h s_time.c
+sess_id.o: ../e_os.h ../include/openssl/asn1.h ../include/openssl/bio.h
+sess_id.o: ../include/openssl/bn.h ../include/openssl/buffer.h
+sess_id.o: ../include/openssl/comp.h ../include/openssl/conf.h
+sess_id.o: ../include/openssl/crypto.h ../include/openssl/dtls1.h
+sess_id.o: ../include/openssl/e_os2.h ../include/openssl/ec.h
+sess_id.o: ../include/openssl/ecdh.h ../include/openssl/ecdsa.h
+sess_id.o: ../include/openssl/engine.h ../include/openssl/err.h
+sess_id.o: ../include/openssl/evp.h ../include/openssl/fips.h
+sess_id.o: ../include/openssl/kssl.h ../include/openssl/lhash.h
+sess_id.o: ../include/openssl/obj_mac.h ../include/openssl/objects.h
+sess_id.o: ../include/openssl/opensslconf.h ../include/openssl/opensslv.h
+sess_id.o: ../include/openssl/ossl_typ.h ../include/openssl/pem.h
+sess_id.o: ../include/openssl/pem2.h ../include/openssl/pkcs7.h
+sess_id.o: ../include/openssl/pq_compat.h ../include/openssl/pqueue.h
+sess_id.o: ../include/openssl/safestack.h ../include/openssl/sha.h
+sess_id.o: ../include/openssl/ssl.h ../include/openssl/ssl2.h
+sess_id.o: ../include/openssl/ssl23.h ../include/openssl/ssl3.h
+sess_id.o: ../include/openssl/stack.h ../include/openssl/symhacks.h
+sess_id.o: ../include/openssl/tls1.h ../include/openssl/txt_db.h
+sess_id.o: ../include/openssl/x509.h ../include/openssl/x509_vfy.h apps.h
+sess_id.o: sess_id.c
+smime.o: ../e_os.h ../include/openssl/asn1.h ../include/openssl/bio.h
+smime.o: ../include/openssl/buffer.h ../include/openssl/conf.h
+smime.o: ../include/openssl/crypto.h ../include/openssl/e_os2.h
+smime.o: ../include/openssl/ec.h ../include/openssl/ecdh.h
+smime.o: ../include/openssl/ecdsa.h ../include/openssl/engine.h
+smime.o: ../include/openssl/err.h ../include/openssl/evp.h
+smime.o: ../include/openssl/fips.h ../include/openssl/lhash.h
+smime.o: ../include/openssl/obj_mac.h ../include/openssl/objects.h
+smime.o: ../include/openssl/opensslconf.h ../include/openssl/opensslv.h
+smime.o: ../include/openssl/ossl_typ.h ../include/openssl/pem.h
+smime.o: ../include/openssl/pem2.h ../include/openssl/pkcs7.h
+smime.o: ../include/openssl/safestack.h ../include/openssl/sha.h
+smime.o: ../include/openssl/stack.h ../include/openssl/symhacks.h
+smime.o: ../include/openssl/txt_db.h ../include/openssl/x509.h
+smime.o: ../include/openssl/x509_vfy.h ../include/openssl/x509v3.h apps.h
+smime.o: smime.c
+speed.o: ../e_os.h ../include/openssl/aes.h ../include/openssl/asn1.h
+speed.o: ../include/openssl/bio.h ../include/openssl/blowfish.h
+speed.o: ../include/openssl/bn.h ../include/openssl/buffer.h
+speed.o: ../include/openssl/cast.h ../include/openssl/conf.h
+speed.o: ../include/openssl/crypto.h ../include/openssl/des.h
+speed.o: ../include/openssl/des_old.h ../include/openssl/dsa.h
+speed.o: ../include/openssl/e_os2.h ../include/openssl/ec.h
+speed.o: ../include/openssl/ecdh.h ../include/openssl/ecdsa.h
+speed.o: ../include/openssl/engine.h ../include/openssl/err.h
+speed.o: ../include/openssl/evp.h ../include/openssl/fips.h
+speed.o: ../include/openssl/hmac.h ../include/openssl/idea.h
+speed.o: ../include/openssl/lhash.h ../include/openssl/md2.h
+speed.o: ../include/openssl/md4.h ../include/openssl/md5.h
+speed.o: ../include/openssl/obj_mac.h ../include/openssl/objects.h
+speed.o: ../include/openssl/opensslconf.h ../include/openssl/opensslv.h
+speed.o: ../include/openssl/ossl_typ.h ../include/openssl/pkcs7.h
+speed.o: ../include/openssl/rand.h ../include/openssl/rc2.h
+speed.o: ../include/openssl/rc4.h ../include/openssl/ripemd.h
+speed.o: ../include/openssl/rsa.h ../include/openssl/safestack.h
+speed.o: ../include/openssl/sha.h ../include/openssl/stack.h
+speed.o: ../include/openssl/symhacks.h ../include/openssl/txt_db.h
+speed.o: ../include/openssl/ui.h ../include/openssl/ui_compat.h
+speed.o: ../include/openssl/x509.h ../include/openssl/x509_vfy.h apps.h speed.c
+speed.o: testdsa.h testrsa.h
+spkac.o: ../e_os.h ../include/openssl/asn1.h ../include/openssl/bio.h
+spkac.o: ../include/openssl/buffer.h ../include/openssl/conf.h
+spkac.o: ../include/openssl/crypto.h ../include/openssl/e_os2.h
+spkac.o: ../include/openssl/ec.h ../include/openssl/ecdh.h
+spkac.o: ../include/openssl/ecdsa.h ../include/openssl/engine.h
+spkac.o: ../include/openssl/err.h ../include/openssl/evp.h
+spkac.o: ../include/openssl/fips.h ../include/openssl/lhash.h
+spkac.o: ../include/openssl/obj_mac.h ../include/openssl/objects.h
+spkac.o: ../include/openssl/opensslconf.h ../include/openssl/opensslv.h
+spkac.o: ../include/openssl/ossl_typ.h ../include/openssl/pem.h
+spkac.o: ../include/openssl/pem2.h ../include/openssl/pkcs7.h
+spkac.o: ../include/openssl/safestack.h ../include/openssl/sha.h
+spkac.o: ../include/openssl/stack.h ../include/openssl/symhacks.h
+spkac.o: ../include/openssl/txt_db.h ../include/openssl/x509.h
+spkac.o: ../include/openssl/x509_vfy.h apps.h spkac.c
+verify.o: ../e_os.h ../include/openssl/asn1.h ../include/openssl/bio.h
+verify.o: ../include/openssl/buffer.h ../include/openssl/conf.h
+verify.o: ../include/openssl/crypto.h ../include/openssl/e_os2.h
+verify.o: ../include/openssl/ec.h ../include/openssl/ecdh.h
+verify.o: ../include/openssl/ecdsa.h ../include/openssl/engine.h
+verify.o: ../include/openssl/err.h ../include/openssl/evp.h
+verify.o: ../include/openssl/fips.h ../include/openssl/lhash.h
+verify.o: ../include/openssl/obj_mac.h ../include/openssl/objects.h
+verify.o: ../include/openssl/opensslconf.h ../include/openssl/opensslv.h
+verify.o: ../include/openssl/ossl_typ.h ../include/openssl/pem.h
+verify.o: ../include/openssl/pem2.h ../include/openssl/pkcs7.h
+verify.o: ../include/openssl/safestack.h ../include/openssl/sha.h
+verify.o: ../include/openssl/stack.h ../include/openssl/symhacks.h
+verify.o: ../include/openssl/txt_db.h ../include/openssl/x509.h
+verify.o: ../include/openssl/x509_vfy.h ../include/openssl/x509v3.h apps.h
+verify.o: verify.c
+version.o: ../e_os.h ../include/openssl/asn1.h ../include/openssl/bio.h
+version.o: ../include/openssl/blowfish.h ../include/openssl/bn.h
+version.o: ../include/openssl/buffer.h ../include/openssl/conf.h
+version.o: ../include/openssl/crypto.h ../include/openssl/des.h
+version.o: ../include/openssl/des_old.h ../include/openssl/e_os2.h
+version.o: ../include/openssl/ec.h ../include/openssl/ecdh.h
+version.o: ../include/openssl/ecdsa.h ../include/openssl/engine.h
+version.o: ../include/openssl/evp.h ../include/openssl/fips.h
+version.o: ../include/openssl/idea.h ../include/openssl/lhash.h
+version.o: ../include/openssl/md2.h ../include/openssl/obj_mac.h
+version.o: ../include/openssl/objects.h ../include/openssl/opensslconf.h
+version.o: ../include/openssl/opensslv.h ../include/openssl/ossl_typ.h
+version.o: ../include/openssl/pkcs7.h ../include/openssl/rc4.h
+version.o: ../include/openssl/safestack.h ../include/openssl/sha.h
+version.o: ../include/openssl/stack.h ../include/openssl/symhacks.h
+version.o: ../include/openssl/txt_db.h ../include/openssl/ui.h
+version.o: ../include/openssl/ui_compat.h ../include/openssl/x509.h
+version.o: ../include/openssl/x509_vfy.h apps.h version.c
+x509.o: ../e_os.h ../include/openssl/asn1.h ../include/openssl/bio.h
+x509.o: ../include/openssl/bn.h ../include/openssl/buffer.h
+x509.o: ../include/openssl/conf.h ../include/openssl/crypto.h
+x509.o: ../include/openssl/dsa.h ../include/openssl/e_os2.h
+x509.o: ../include/openssl/ec.h ../include/openssl/ecdh.h
+x509.o: ../include/openssl/ecdsa.h ../include/openssl/engine.h
+x509.o: ../include/openssl/err.h ../include/openssl/evp.h
+x509.o: ../include/openssl/fips.h ../include/openssl/lhash.h
+x509.o: ../include/openssl/obj_mac.h ../include/openssl/objects.h
+x509.o: ../include/openssl/opensslconf.h ../include/openssl/opensslv.h
+x509.o: ../include/openssl/ossl_typ.h ../include/openssl/pem.h
+x509.o: ../include/openssl/pem2.h ../include/openssl/pkcs7.h
+x509.o: ../include/openssl/rsa.h ../include/openssl/safestack.h
+x509.o: ../include/openssl/sha.h ../include/openssl/stack.h
+x509.o: ../include/openssl/symhacks.h ../include/openssl/txt_db.h
+x509.o: ../include/openssl/x509.h ../include/openssl/x509_vfy.h
+x509.o: ../include/openssl/x509v3.h apps.h x509.c

apps/apps.h

@@ -114,9 +114,7 @@
 
 #include "e_os.h"
 
-#include <openssl/buffer.h>
 #include <openssl/bio.h>
-#include <openssl/crypto.h>
 #include <openssl/x509.h>
 #include <openssl/lhash.h>
 #include <openssl/conf.h>
@@ -124,6 +122,9 @@
 #ifndef OPENSSL_NO_ENGINE
 #include <openssl/engine.h>
 #endif
+#ifndef OPENSSL_NO_OCSP
+#include <openssl/ocsp.h>
+#endif
 #include <openssl/ossl_typ.h>
 
 int app_RAND_load_file(const char *file, BIO *bio_e, int dont_warn);
@@ -138,13 +139,7 @@ long app_RAND_load_files(char *file); /* `file' is a list of files to read,
 
 #ifdef OPENSSL_SYS_WIN32
 #define rename(from,to) WIN32_rename((from),(to))
-int WIN32_rename(char *oldname,char *newname);
+int WIN32_rename(const char *oldname,const char *newname);
-#endif
-
-/* VMS below version 7.0 doesn't have strcasecmp() */
-#ifdef OPENSSL_SYS_VMS
-#define strcasecmp(str1,str2) VMS_strcasecmp((str1),(str2))
-int VMS_strcasecmp(const char *str1, const char *str2);
 #endif
 
 #ifndef MONOLITH
@@ -154,9 +149,11 @@ int VMS_strcasecmp(const char *str1, const char *str2);
 #ifndef NON_MAIN
 CONF *config=NULL;
 BIO *bio_err=NULL;
+int in_FIPS_mode=0;
 #else
 extern CONF *config;
 extern BIO *bio_err;
+extern int in_FIPS_mode;
 #endif
 
 #else
@@ -165,10 +162,13 @@ extern BIO *bio_err;
 extern CONF *config;
 extern char *default_config_file;
 extern BIO *bio_err;
+extern int in_FIPS_mode;
 
 #endif
 
+#ifndef OPENSSL_SYS_NETWARE
 #include <signal.h>
+#endif
 
 #ifdef SIGPIPE
 #define do_pipe_sig()	signal(SIGPIPE,SIG_IGN)
@@ -234,6 +234,12 @@ extern BIO *bio_err;
 #  endif
 #endif
 
+#ifdef OPENSSL_SYSNAME_WIN32
+#  define openssl_fdset(a,b) FD_SET((unsigned int)a, b)
+#else
+#  define openssl_fdset(a,b) FD_SET(a, b)
+#endif
+
 typedef struct args_st
 	{
 	char **data;
@@ -260,7 +266,7 @@ void program_name(char *in,char *out,int size);
 int chopup_args(ARGS *arg,char *buf, int *argc, char **argv[]);
 #ifdef HEADER_X509_H
 int dump_cert_text(BIO *out, X509 *x);
-void print_name(BIO *out, char *title, X509_NAME *nm, unsigned long lflags);
+void print_name(BIO *out, const char *title, X509_NAME *nm, unsigned long lflags);
 #endif
 int set_cert_ex(unsigned long *flags, const char *arg);
 int set_name_ex(unsigned long *flags, const char *arg);
@@ -281,15 +287,57 @@ X509_STORE *setup_verify(BIO *bp, char *CAfile, char *CApath);
 ENGINE *setup_engine(BIO *err, const char *engine, int debug);
 #endif
 
+#ifndef OPENSSL_NO_OCSP
+OCSP_RESPONSE *process_responder(BIO *err, OCSP_REQUEST *req,
+			char *host, char *path, char *port, int use_ssl,
+			int req_timeout);
+#endif
+
 int load_config(BIO *err, CONF *cnf);
 char *make_config_name(void);
 
 /* Functions defined in ca.c and also used in ocsp.c */
 int unpack_revinfo(ASN1_TIME **prevtm, int *preason, ASN1_OBJECT **phold,
-			ASN1_GENERALIZEDTIME **pinvtm, char *str);
+			ASN1_GENERALIZEDTIME **pinvtm, const char *str);
-int make_serial_index(TXT_DB *db);
 
-X509_NAME *do_subject(char *str, long chtype);
+#define DB_type         0
+#define DB_exp_date     1
+#define DB_rev_date     2
+#define DB_serial       3       /* index - unique */
+#define DB_file         4       
+#define DB_name         5       /* index - unique when active and not disabled */
+#define DB_NUMBER       6
+
+#define DB_TYPE_REV	'R'
+#define DB_TYPE_EXP	'E'
+#define DB_TYPE_VAL	'V'
+
+typedef struct db_attr_st
+	{
+	int unique_subject;
+	} DB_ATTR;
+typedef struct ca_db_st
+	{
+	DB_ATTR attributes;
+	TXT_DB *db;
+	} CA_DB;
+
+BIGNUM *load_serial(char *serialfile, int create, ASN1_INTEGER **retai);
+int save_serial(char *serialfile, char *suffix, BIGNUM *serial, ASN1_INTEGER **retai);
+int rotate_serial(char *serialfile, char *new_suffix, char *old_suffix);
+int rand_serial(BIGNUM *b, ASN1_INTEGER *ai);
+CA_DB *load_index(char *dbfile, DB_ATTR *dbattr);
+int index_index(CA_DB *db);
+int save_index(const char *dbfile, const char *suffix, CA_DB *db);
+int rotate_index(const char *dbfile, const char *new_suffix, const char *old_suffix);
+void free_index(CA_DB *db);
+int index_name_cmp(const char **a, const char **b);
+int parse_yesno(const char *str, int def);
+
+X509_NAME *parse_name(char *str, long chtype, int multirdn);
+int args_verify(char ***pargs, int *pargc,
+			int *badarg, BIO *err, X509_VERIFY_PARAM **pm);
+void policies_print(BIO *out, X509_STORE_CTX *ctx);
 
 #define FORMAT_UNDEF    0
 #define FORMAT_ASN1     1
@@ -310,4 +358,6 @@ X509_NAME *do_subject(char *str, long chtype);
 
 #define APP_PASS_LEN	1024
 
+#define SERIAL_RAND_BITS	64
+
 #endif

apps/asn1pars.c

@@ -82,6 +82,8 @@
 
 int MAIN(int, char **);
 
+static int do_generate(BIO *bio, char *genstr, char *genconf, BUF_MEM *buf);
+
 int MAIN(int argc, char **argv)
 	{
 	int i,badops=0,offset=0,ret=1,j;
@@ -90,7 +92,9 @@ int MAIN(int argc, char **argv)
 	BIO *in=NULL,*out=NULL,*b64=NULL, *derout = NULL;
 	int informat,indent=0, noout = 0, dump = 0;
 	char *infile=NULL,*str=NULL,*prog,*oidfile=NULL, *derfile=NULL;
+	char *genstr=NULL, *genconf=NULL;
 	unsigned char *tmpbuf;
+	const unsigned char *ctmpbuf;
 	BUF_MEM *buf=NULL;
 	STACK *osk=NULL;
 	ASN1_TYPE *at=NULL;
@@ -167,6 +171,16 @@ int MAIN(int argc, char **argv)
 			if (--argc < 1) goto bad;
 			sk_push(osk,*(++argv));
 			}
+		else if (strcmp(*argv,"-genstr") == 0)
+			{
+			if (--argc < 1) goto bad;
+			genstr= *(++argv);
+			}
+		else if (strcmp(*argv,"-genconf") == 0)
+			{
+			if (--argc < 1) goto bad;
+			genconf= *(++argv);
+			}
 		else
 			{
 			BIO_printf(bio_err,"unknown option %s\n",*argv);
@@ -182,7 +196,7 @@ int MAIN(int argc, char **argv)
 bad:
 		BIO_printf(bio_err,"%s [options] <infile\n",prog);
 		BIO_printf(bio_err,"where options are\n");
-		BIO_printf(bio_err," -inform arg   input format - one of DER TXT PEM\n");
+		BIO_printf(bio_err," -inform arg   input format - one of DER PEM\n");
 		BIO_printf(bio_err," -in arg       input file\n");
 		BIO_printf(bio_err," -out arg      output file (output format is always DER\n");
 		BIO_printf(bio_err," -noout arg    don't produce any output\n");
@@ -195,6 +209,8 @@ bad:
 		BIO_printf(bio_err," -strparse offset\n");
 		BIO_printf(bio_err,"               a series of these can be used to 'dig' into multiple\n");
 		BIO_printf(bio_err,"               ASN1 blob wrappings\n");
+		BIO_printf(bio_err," -genstr str   string to generate ASN1 structure from\n");
+		BIO_printf(bio_err," -genconf file file to generate ASN1 structure from\n");
 		goto end;
 		}
 
@@ -248,6 +264,19 @@ bad:
 	if ((buf=BUF_MEM_new()) == NULL) goto end;
 	if (!BUF_MEM_grow(buf,BUFSIZ*8)) goto end; /* Pre-allocate :-) */
 
+	if (genstr || genconf)
+		{
+		num = do_generate(bio_err, genstr, genconf, buf);
+		if (num < 0)
+			{
+			ERR_print_errors(bio_err);
+			goto end;
+			}
+		}
+
+	else
+		{
+
 		if (informat == FORMAT_PEM)
 			{
 			BIO *tmp;
@@ -268,6 +297,7 @@ bad:
 			if (i <= 0) break;
 			num+=i;
 			}
+		}
 	str=buf->data;
 
 	/* If any structs to parse go through in sequence */
@@ -279,6 +309,7 @@ bad:
 		for (i=0; i<sk_num(osk); i++)
 			{
 			ASN1_TYPE *atmp;
+			int typ;
 			j=atoi(sk_value(osk,i));
 			if (j == 0)
 				{
@@ -288,7 +319,8 @@ bad:
 			tmpbuf+=j;
 			tmplen-=j;
 			atmp = at;
-			at = d2i_ASN1_TYPE(NULL,&tmpbuf,tmplen);
+			ctmpbuf = tmpbuf;
+			at = d2i_ASN1_TYPE(NULL,&ctmpbuf,tmplen);
 			ASN1_TYPE_free(atmp);
 			if(!at)
 				{
@@ -296,6 +328,15 @@ bad:
 				ERR_print_errors(bio_err);
 				goto end;
 				}
+			typ = ASN1_TYPE_get(at);
+			if ((typ == V_ASN1_OBJECT)
+				|| (typ == V_ASN1_NULL))
+				{
+				BIO_printf(bio_err, "Can't parse %s type\n",
+					typ == V_ASN1_NULL ? "NULL" : "OBJECT");
+				ERR_print_errors(bio_err);
+				goto end;
+				}
 			/* hmm... this is a little evil but it works */
 			tmpbuf=at->value.asn1_string->data;
 			tmplen=at->value.asn1_string->length;
@@ -304,7 +345,15 @@ bad:
 		num=tmplen;
 		}
 
-	if (length == 0) length=(unsigned int)num;
+	if (offset >= num)
+		{
+		BIO_printf(bio_err, "Error: offset too large\n");
+		goto end;
+		}
+
+	num -= offset;
+
+	if ((length == 0) || ((long)length > num)) length=(unsigned int)num;
 	if(derout) {
 		if(BIO_write(derout, str + offset, length) != (int)length) {
 			BIO_printf(bio_err, "Error writing output\n");
@@ -335,3 +384,61 @@ end:
 	OPENSSL_EXIT(ret);
 	}
 
+static int do_generate(BIO *bio, char *genstr, char *genconf, BUF_MEM *buf)
+	{
+	CONF *cnf = NULL;
+	int len;
+	long errline;
+	unsigned char *p;
+	ASN1_TYPE *atyp = NULL;
+
+	if (genconf)
+		{
+		cnf = NCONF_new(NULL);
+		if (!NCONF_load(cnf, genconf, &errline))
+			goto conferr;
+		if (!genstr)
+			genstr = NCONF_get_string(cnf, "default", "asn1");
+		if (!genstr)
+			{
+			BIO_printf(bio, "Can't find 'asn1' in '%s'\n", genconf);
+			goto err;
+			}
+		}
+
+	atyp = ASN1_generate_nconf(genstr, cnf);
+	NCONF_free(cnf);
+
+	if (!atyp)
+		return -1;
+
+	len = i2d_ASN1_TYPE(atyp, NULL);
+
+	if (len <= 0)
+		goto err;
+
+	if (!BUF_MEM_grow(buf,len))
+		goto err;
+
+	p=(unsigned char *)buf->data;
+
+	i2d_ASN1_TYPE(atyp, &p);
+
+	ASN1_TYPE_free(atyp);
+	return len;
+
+	conferr:
+
+	if (errline > 0)
+		BIO_printf(bio, "Error on line %ld of config file '%s'\n",
+							errline, genconf);
+	else
+		BIO_printf(bio, "Error loading config file '%s'\n", genconf);
+
+	err:
+	NCONF_free(cnf);
+	ASN1_TYPE_free(atyp);
+
+	return -1;
+
+	}

apps/ciphers.c

@@ -69,7 +69,7 @@
 #undef PROG
 #define PROG	ciphers_main
 
-static char *ciphers_usage[]={
+static const char *ciphers_usage[]={
 "usage: ciphers args\n",
 " -v          - verbose mode, a textual listing of the ciphers in SSLeay\n",
 " -ssl2       - SSL2 mode\n",
@@ -84,7 +84,7 @@ int MAIN(int argc, char **argv)
 	{
 	int ret=1,i;
 	int verbose=0;
-	char **pp;
+	const char **pp;
 	const char *p;
 	int badops=0;
 	SSL_CTX *ctx=NULL;

apps/crl.c

@@ -72,7 +72,7 @@
 #undef POSTFIX
 #define	POSTFIX	".rvk"
 
-static char *crl_usage[]={
+static const char *crl_usage[]={
 "usage: crl args\n",
 "\n",
 " -inform arg     - input format - default PEM (DER or PEM)\n",
@@ -81,6 +81,7 @@ static char *crl_usage[]={
 " -in arg         - input file - default stdin\n",
 " -out arg        - output file - default stdout\n",
 " -hash           - print hash value\n",
+" -fingerprint    - print the crl fingerprint\n",
 " -issuer         - print issuer DN\n",
 " -lastupdate     - lastUpdate field\n",
 " -nextupdate     - nextUpdate field\n",
@@ -107,14 +108,14 @@ int MAIN(int argc, char **argv)
 	char *infile=NULL,*outfile=NULL;
 	int hash=0,issuer=0,lastupdate=0,nextupdate=0,noout=0,text=0;
 	int fingerprint = 0;
-	char **pp;
+	const char **pp;
 	X509_STORE *store = NULL;
 	X509_STORE_CTX ctx;
 	X509_LOOKUP *lookup = NULL;
 	X509_OBJECT xobj;
 	EVP_PKEY *pkey;
 	int do_ver = 0;
-	const EVP_MD *md_alg,*digest=EVP_md5();
+	const EVP_MD *md_alg,*digest=EVP_sha1();
 
 	apps_startup();
 
@@ -354,7 +355,11 @@ bad:
 
 	if (text) X509_CRL_print(out, x);
 
-	if (noout) goto end;
+	if (noout) 
+		{
+		ret = 0;
+		goto end;
+		}
 
 	if 	(outformat == FORMAT_ASN1)
 		i=(int)i2d_X509_CRL_bio(out,x);

apps/der_chop.in

@@ -1,305 +0,0 @@
-#!/usr/local/bin/perl
-#
-# der_chop ... this is one total hack that Eric is really not proud of
-#              so don't look at it and don't ask for support
-#
-# The "documentation" for this (i.e. all the comments) are my fault --tjh
-#
-# This program takes the "raw" output of derparse/asn1parse and 
-# converts it into tokens and then runs regular expression matches
-# to try to figure out what to grab to get the things that are needed
-# and it is possible that this will do the wrong thing as it is a *hack*
-#
-# SSLeay 0.5.2+ should have direct read support for x509 (via -inform NET)
-# [I know ... promises promises :-)]
-#
-# To convert a Netscape Certificate:
-#    der_chop < ServerCert.der > cert.pem
-# To convert a Netscape Key (and encrypt it again to protect it)
-#    rsa -inform NET -in ServerKey.der -des > key.pem
-#
-# 23-Apr-96 eay    Added the extra ASN.1 string types, I still think this
-#		   is an evil hack.  If nothing else the parsing should
-#		   be relative, not absolute.
-# 19-Apr-96 tjh    hacked (with eay) into 0.5.x format
-#
-# Tim Hudson
-# tjh@cryptsoft.com
-#
-
-
-require 'getopts.pl';
-
-$debug=0;
-
-# this was the 0.4.x way of doing things ...
-$cmd="derparse";
-$x509_cmd="x509";
-$crl_cmd="crl";
-$rc4_cmd="rc4";
-$md2_cmd="md2";
-$md4_cmd="md4";
-$rsa_cmd="rsa -des -inform der ";
-
-# this was the 0.5.x way of doing things ...
-$cmd="openssl asn1parse";
-$x509_cmd="openssl x509";
-$crl_cmd="openssl crl";
-$rc4_cmd="openssl rc4";
-$md2_cmd="openssl md2";
-$md4_cmd="openssl md4";
-$rsa_cmd="openssl rsa -des -inform der ";
-
-&Getopts('vd:') || die "usage:$0 [-v] [-d num] file";
-$depth=($opt_d =~ /^\d+$/)?$opt_d:0;
-
-&init_der();
-
-if ($#ARGV != -1)
-	{
-	foreach $file (@ARGV)
-		{
-		print STDERR "doing $file\n";
-		&dofile($file);
-		}
-	}
-else
-	{
-	$file="/tmp/a$$.DER";
-	open(OUT,">$file") || die "unable to open $file:$!\n";
-	for (;;)
-		{
-		$i=sysread(STDIN,$b,1024*10);
-		last if ($i <= 0);
-		$i=syswrite(OUT,$b,$i);
-		}
-	&dofile($file);
-	unlink($file);
-	}
-	
-sub dofile
-	{
-	local($file)=@_;
-	local(@p);
-
-	$b=&load_file($file);
-	@p=&load_file_parse($file);
-
-	foreach $_ (@p)
-		{
-		($off,$d,$hl,$len)=&parse_line($_);
-		$d-=$depth;
-		next if ($d != 0);
-		next if ($len == 0);
-
-		$o=substr($b,$off,$len+$hl);
-		($str,@data)=&der_str($o);
-		print "$str\n" if ($opt_v);
-		if ($str =~ /^$crl/)
-			{
-			open(OUT,"|$crl_cmd -inform d -hash -issuer") ||
-				die "unable to run $crl_cmd:$!\n";
-			print OUT $o;
-			close(OUT);
-			}
-		elsif ($str =~ /^$x509/)
-			{
-			open(OUT,"|$x509_cmd -inform d -hash -subject -issuer")
-				|| die "unable to run $x509_cmd:$!\n";
-			print OUT $o;
-			close(OUT);
-			}
-		elsif ($str =~ /^$rsa/)
-			{
-			($type)=($data[3] =~ /OBJECT_IDENTIFIER :(.*)\s*$/);
-			next unless ($type eq "rsaEncryption");
-			($off,$d,$hl,$len)=&parse_line($data[5]);
-			$os=substr($o,$off+$hl,$len);
-			open(OUT,"|$rsa_cmd")
-				|| die "unable to run $rsa_cmd:$!\n";
-			print OUT $os;
-			close(OUT);
-			}
-		elsif ($str =~ /^0G-1D-1G/)
-			{
-			($off,$d,$hl,$len)=&parse_line($data[1]);
-			$os=substr($o,$off+$hl,$len);
-			print STDERR "<$os>\n" if $opt_v;
-			&do_certificate($o,@data)
-				if (($os eq "certificate") &&
-				    ($str =! /^0G-1D-1G-2G-3F-3E-2D/));
-			&do_private_key($o,@data)
-				if (($os eq "private-key") &&
-				    ($str =! /^0G-1D-1G-2G-3F-3E-2D/));
-			}
-		}
-	}
-
-sub der_str
-	{
-	local($str)=@_;
-	local(*OUT,*IN,@a,$t,$d,$ret);
-	local($file)="/tmp/b$$.DER";
-	local(@ret);
-
-	open(OUT,">$file");
-	print OUT $str;
-	close(OUT);
-	open(IN,"$cmd -inform 'd' -in $file |") ||
-		die "unable to run $cmd:$!\n";
-	$ret="";
-	while (<IN>)
-		{
-		chop;
-		push(@ret,$_);
-
-		print STDERR "$_\n" if ($debug);
-
-		@a=split(/\s*:\s*/);
-		($d)=($a[1] =~ /d=\s*(\d+)/);
-		$a[2] =~ s/\s+$//;
-		$t=$DER_s2i{$a[2]};
-		$ret.="$d$t-";
-		}
-	close(IN);
-	unlink($file);
-	chop $ret;
-	$ret =~ s/(-3H(-4G-5F-5[IJKMQRS])+)+/-NAME/g;
-	$ret =~ s/(-3G-4B-4L)+/-RCERT/g;
-	return($ret,@ret);
-	}
-
-sub init_der
-	{
-	$crl= "0G-1G-2G-3F-3E-2G-NAME-2L-2L-2G-RCERT-1G-2F-2E-1C";
-	$x509="0G-1G-2B-2G-3F-3E-2G-NAME-2G-3L-3L-2G-NAME-2G-3G-4F-4E-3C-1G-2F-2E-1C";
-	$rsa= "0G-1B-1G-2F-2E-1D";
-
-	%DER_i2s=(
-		# SSLeay 0.4.x has this list
-		"A","EOC",
-		"B","INTEGER",
-		"C","BIT STRING",
-		"D","OCTET STRING",
-		"E","NULL",
-		"F","OBJECT",
-		"G","SEQUENCE",
-		"H","SET",
-		"I","PRINTABLESTRING",
-		"J","T61STRING",
-		"K","IA5STRING",
-		"L","UTCTIME",
-		"M","NUMERICSTRING",
-		"N","VIDEOTEXSTRING",
-		"O","GENERALIZEDTIME",
-		"P","GRAPHICSTRING",
-		"Q","ISO64STRING",
-		"R","GENERALSTRING",
-		"S","UNIVERSALSTRING",
-
-		# SSLeay 0.5.x changed some things ... and I'm
-		# leaving in the old stuff but adding in these
-		# to handle the new as well --tjh
-		# - Well I've just taken them out and added the extra new
-		# ones :-) - eay
-		);
-
-	foreach (keys %DER_i2s)
-		{ $DER_s2i{$DER_i2s{$_}}=$_; }
-	}
-
-sub parse_line
-	{
-	local($_)=@_;
-
-	return(/\s*(\d+):d=\s*(\d+)\s+hl=\s*(\d+)\s+l=\s*(\d+|inf)\s/);
-	}
-
-#  0:d=0 hl=4 l=377 cons: univ: SEQUENCE          
-#  4:d=1 hl=2 l= 11 prim: univ: OCTET_STRING      
-# 17:d=1 hl=4 l=360 cons: univ: SEQUENCE          
-# 21:d=2 hl=2 l= 12 cons: univ: SEQUENCE          
-# 23:d=3 hl=2 l=  8 prim: univ: OBJECT_IDENTIFIER :rc4
-# 33:d=3 hl=2 l=  0 prim: univ: NULL              
-# 35:d=2 hl=4 l=342 prim: univ: OCTET_STRING
-sub do_private_key
-	{
-	local($data,@struct)=@_;
-	local($file)="/tmp/b$$.DER";
-	local($off,$d,$hl,$len,$_,$b,@p,$s);
-
-	($type)=($struct[4] =~ /OBJECT_IDENTIFIER :(.*)\s*$/);
-	if ($type eq "rc4")
-		{
-		($off,$d,$hl,$len)=&parse_line($struct[6]);
-		open(OUT,"|$rc4_cmd >$file") ||
-			die "unable to run $rc4_cmd:$!\n";
-		print OUT substr($data,$off+$hl,$len);
-		close(OUT);
-
-		$b=&load_file($file);
-		unlink($file);
-
-		($s,@p)=&der_str($b);
-		die "unknown rsa key type\n$s\n"
-			if ($s ne '0G-1B-1G-2F-2E-1D');
-		local($off,$d,$hl,$len)=&parse_line($p[5]);
-		$b=substr($b,$off+$hl,$len);
-		($s,@p)=&der_str($b);
-		open(OUT,"|$rsa_cmd") || die "unable to run $rsa_cmd:$!\n";
-		print OUT $b;
-		close(OUT);
-		}
-	else
-		{
-		print "'$type' is unknown\n";
-		exit(1);
-		}
-	}
-
-sub do_certificate
-	{
-	local($data,@struct)=@_;
-	local($file)="/tmp/b$$.DER";
-	local($off,$d,$hl,$len,$_,$b,@p,$s);
-
-	($off,$d,$hl,$len)=&parse_line($struct[2]);
-	$b=substr($data,$off,$len+$hl);
-
-	open(OUT,"|$x509_cmd -inform d") || die "unable to run $x509_cmd:$!\n";
-	print OUT $b;
-	close(OUT);
-	}
-
-sub load_file
-	{
-	local($file)=@_;
-	local(*IN,$r,$b,$i);
-
-	$r="";
-	open(IN,"<$file") || die "unable to open $file:$!\n";
-	for (;;)
-		{
-		$i=sysread(IN,$b,10240);
-		last if ($i <= 0);
-		$r.=$b;
-		}
-	close(IN);
-	return($r);
-	}
-
-sub load_file_parse
-	{
-	local($file)=@_;
-	local(*IN,$r,@ret,$_,$i,$n,$b);
-
-	open(IN,"$cmd -inform d -in $file|")
-		|| die "unable to run der_parse\n";
-	while (<IN>)
-		{
-		chop;
-		push(@ret,$_);
-		}
-	return($r,@ret);
-	}
-

apps/dgst.c

@@ -66,6 +66,7 @@
 #include <openssl/objects.h>
 #include <openssl/x509.h>
 #include <openssl/pem.h>
+#include <openssl/hmac.h>
 
 #undef BUFSIZE
 #define BUFSIZE	1024*8
@@ -75,7 +76,7 @@
 
 int do_fp(BIO *out, unsigned char *buf, BIO *bp, int sep, int binout,
 	  EVP_PKEY *key, unsigned char *sigin, int siglen, const char *title,
-	  const char *file);
+	  const char *file,BIO *bmd,const char *hmac_key, int non_fips_allow);
 
 int MAIN(int, char **);
 
@@ -100,12 +101,16 @@ int MAIN(int argc, char **argv)
 	EVP_PKEY *sigkey = NULL;
 	unsigned char *sigbuf = NULL;
 	int siglen = 0;
+	unsigned int sig_flags = 0;
+	char *passargin = NULL, *passin = NULL;
 #ifndef OPENSSL_NO_ENGINE
 	char *engine=NULL;
 #endif
+	char *hmac_key=NULL;
+	int non_fips_allow = 0;
 
 	apps_startup();
-
+ERR_load_crypto_strings();
 	if ((buf=(unsigned char *)OPENSSL_malloc(BUFSIZE)) == NULL)
 		{
 		BIO_printf(bio_err,"out of memory\n");
@@ -145,6 +150,12 @@ int MAIN(int argc, char **argv)
 			if (--argc < 1) break;
 			keyfile=*(++argv);
 			}
+		else if (!strcmp(*argv,"-passin"))
+			{
+			if (--argc < 1)
+				break;
+			passargin=*++argv;
+			}
 		else if (strcmp(*argv,"-verify") == 0)
 			{
 			if (--argc < 1) break;
@@ -158,6 +169,27 @@ int MAIN(int argc, char **argv)
 			keyfile=*(++argv);
 			do_verify = 1;
 			}
+		else if (strcmp(*argv,"-x931") == 0)
+			sig_flags = EVP_MD_CTX_FLAG_PAD_X931;
+		else if (strcmp(*argv,"-pss_saltlen") == 0)
+			{
+			int saltlen;
+			if (--argc < 1) break;
+			saltlen=atoi(*(++argv));
+			if (saltlen == -1)
+				sig_flags = EVP_MD_CTX_FLAG_PSS_MREC;
+			else if (saltlen == -2)
+				sig_flags = EVP_MD_CTX_FLAG_PSS_MDLEN;
+			else if (saltlen < -2 || saltlen >= 0xFFFE)
+				{
+				BIO_printf(bio_err, "Invalid PSS salt length %d\n", saltlen);
+				goto end;
+				}
+			else
+				sig_flags = saltlen;
+			sig_flags <<= 16;
+			sig_flags |= EVP_MD_CTX_FLAG_PAD_PSS;
+			}
 		else if (strcmp(*argv,"-signature") == 0)
 			{
 			if (--argc < 1) break;
@@ -181,6 +213,16 @@ int MAIN(int argc, char **argv)
 			out_bin = 1;
 		else if (strcmp(*argv,"-d") == 0)
 			debug=1;
+		else if (strcmp(*argv,"-non-fips-allow") == 0)
+			non_fips_allow=1;
+		else if (!strcmp(*argv,"-fips-fingerprint"))
+			hmac_key = "etaonrishdlcupfm";
+		else if (!strcmp(*argv,"-hmac"))
+			{
+			if (--argc < 1)
+				break;
+			hmac_key=*++argv;
+			}
 		else if ((m=EVP_get_digestbyname(&((*argv)[1]))) != NULL)
 			md=m;
 		else
@@ -212,23 +254,38 @@ int MAIN(int argc, char **argv)
 		BIO_printf(bio_err,"-keyform arg    key file format (PEM or ENGINE)\n");
 		BIO_printf(bio_err,"-signature file signature to verify\n");
 		BIO_printf(bio_err,"-binary         output in binary form\n");
+		BIO_printf(bio_err,"-hmac key       create hashed MAC with key\n");
 #ifndef OPENSSL_NO_ENGINE
 		BIO_printf(bio_err,"-engine e       use engine e, possibly a hardware device.\n");
 #endif
 
-		BIO_printf(bio_err,"-%3s to use the %s message digest algorithm (default)\n",
+		BIO_printf(bio_err,"-%-14s to use the %s message digest algorithm (default)\n",
 			LN_md5,LN_md5);
-		BIO_printf(bio_err,"-%3s to use the %s message digest algorithm\n",
+		BIO_printf(bio_err,"-%-14s to use the %s message digest algorithm\n",
 			LN_md4,LN_md4);
-		BIO_printf(bio_err,"-%3s to use the %s message digest algorithm\n",
+		BIO_printf(bio_err,"-%-14s to use the %s message digest algorithm\n",
 			LN_md2,LN_md2);
-		BIO_printf(bio_err,"-%3s to use the %s message digest algorithm\n",
+#ifndef OPENSSL_NO_SHA
+		BIO_printf(bio_err,"-%-14s to use the %s message digest algorithm\n",
 			LN_sha1,LN_sha1);
-		BIO_printf(bio_err,"-%3s to use the %s message digest algorithm\n",
+		BIO_printf(bio_err,"-%-14s to use the %s message digest algorithm\n",
 			LN_sha,LN_sha);
-		BIO_printf(bio_err,"-%3s to use the %s message digest algorithm\n",
+#ifndef OPENSSL_NO_SHA256
+		BIO_printf(bio_err,"-%-14s to use the %s message digest algorithm\n",
+			LN_sha224,LN_sha224);
+		BIO_printf(bio_err,"-%-14s to use the %s message digest algorithm\n",
+			LN_sha256,LN_sha256);
+#endif
+#ifndef OPENSSL_NO_SHA512
+		BIO_printf(bio_err,"-%-14s to use the %s message digest algorithm\n",
+			LN_sha384,LN_sha384);
+		BIO_printf(bio_err,"-%-14s to use the %s message digest algorithm\n",
+			LN_sha512,LN_sha512);
+#endif
+#endif
+		BIO_printf(bio_err,"-%-14s to use the %s message digest algorithm\n",
 			LN_mdc2,LN_mdc2);
-		BIO_printf(bio_err,"-%3s to use the %s message digest algorithm\n",
+		BIO_printf(bio_err,"-%-14s to use the %s message digest algorithm\n",
 			LN_ripemd160,LN_ripemd160);
 		err=1;
 		goto end;
@@ -244,7 +301,13 @@ int MAIN(int argc, char **argv)
 		{
 		BIO_set_callback(in,BIO_debug_callback);
 		/* needed for windows 3.1 */
-		BIO_set_callback_arg(in,bio_err);
+		BIO_set_callback_arg(in,(char *)bio_err);
+		}
+
+	if(!app_passwd(bio_err, passargin, NULL, &passin, NULL))
+		{
+		BIO_printf(bio_err, "Error getting password\n");
+		goto end;
 		}
 
 	if ((in == NULL) || (bmd == NULL))
@@ -288,7 +351,7 @@ int MAIN(int argc, char **argv)
 			sigkey = load_pubkey(bio_err, keyfile, keyform, 0, NULL,
 				e, "key file");
 		else
-			sigkey = load_key(bio_err, keyfile, keyform, 0, NULL,
+			sigkey = load_key(bio_err, keyfile, keyform, 0, passin,
 				e, "key file");
 		if (!sigkey)
 			{
@@ -319,17 +382,35 @@ int MAIN(int argc, char **argv)
 		}
 	}
 
+	if (non_fips_allow)
+		{
+		EVP_MD_CTX *md_ctx;
+		BIO_get_md_ctx(bmd,&md_ctx);
+		EVP_MD_CTX_set_flags(md_ctx, EVP_MD_CTX_FLAG_NON_FIPS_ALLOW);
+		}
 
+	if (sig_flags)
+		{
+		EVP_MD_CTX *md_ctx;
+		BIO_get_md_ctx(bmd,&md_ctx);
+		EVP_MD_CTX_set_flags(md_ctx, sig_flags);
+		}
 
 	/* we use md as a filter, reading from 'in' */
-	BIO_set_md(bmd,md);
+	if (!BIO_set_md(bmd,md))
+		{
+		BIO_printf(bio_err, "Error setting digest %s\n", pname);
+		ERR_print_errors(bio_err);
+		goto end;
+		}
+		
 	inp=BIO_push(bmd,in);
 
 	if (argc == 0)
 		{
 		BIO_set_fp(in,stdin,BIO_NOCLOSE);
 		err=do_fp(out, buf,inp,separator, out_bin, sigkey, sigbuf,
-			  siglen,"","(stdin)");
+			  siglen,"","(stdin)",bmd,hmac_key,non_fips_allow);
 		}
 	else
 		{
@@ -347,13 +428,15 @@ int MAIN(int argc, char **argv)
 				}
 			if(!out_bin)
 				{
-				tmp=tofree=OPENSSL_malloc(strlen(name)+strlen(argv[i])+5);
+				size_t len = strlen(name)+strlen(argv[i])+(hmac_key ? 5 : 0)+5;
-				sprintf(tmp,"%s(%s)= ",name,argv[i]);
+				tmp=tofree=OPENSSL_malloc(len);
+				BIO_snprintf(tmp,len,"%s%s(%s)= ",
+							 hmac_key ? "HMAC-" : "",name,argv[i]);
 				}
 			else
 				tmp="";
 			r=do_fp(out,buf,inp,separator,out_bin,sigkey,sigbuf,
-				siglen,tmp,argv[i]);
+				siglen,tmp,argv[i],bmd,hmac_key,non_fips_allow);
 			if(r)
 			    err=r;
 			if(tofree)
@@ -368,6 +451,8 @@ end:
 		OPENSSL_free(buf);
 		}
 	if (in != NULL) BIO_free(in);
+	if (passin)
+		OPENSSL_free(passin);
 	BIO_free_all(out);
 	EVP_PKEY_free(sigkey);
 	if(sigbuf) OPENSSL_free(sigbuf);
@@ -378,11 +463,23 @@ end:
 
 int do_fp(BIO *out, unsigned char *buf, BIO *bp, int sep, int binout,
 	  EVP_PKEY *key, unsigned char *sigin, int siglen, const char *title,
-	  const char *file)
+	  const char *file,BIO *bmd,const char *hmac_key,int non_fips_allow)
 	{
-	int len;
+	unsigned int len;
 	int i;
+	EVP_MD_CTX *md_ctx;
+	HMAC_CTX hmac_ctx;
 
+	if (hmac_key)
+		{
+		EVP_MD *md;
+
+		BIO_get_md(bmd,&md);
+		HMAC_CTX_init(&hmac_ctx);
+		HMAC_Init_ex(&hmac_ctx,hmac_key,strlen(hmac_key),md, NULL);
+		BIO_get_md_ctx(bmd,&md_ctx);
+		BIO_set_md_ctx(bmd,&hmac_ctx.md_ctx);
+		}
 	for (;;)
 		{
 		i=BIO_read(bp,(char *)buf,BUFSIZE);
@@ -425,6 +522,11 @@ int do_fp(BIO *out, unsigned char *buf, BIO *bp, int sep, int binout,
 			return 1;
 			}
 		}
+	else if(hmac_key)
+		{
+		HMAC_Final(&hmac_ctx,buf,&len);
+		HMAC_CTX_cleanup(&hmac_ctx);
+		}
 	else
 		len=BIO_gets(bp,(char *)buf,BUFSIZE);
 
@@ -432,7 +534,7 @@ int do_fp(BIO *out, unsigned char *buf, BIO *bp, int sep, int binout,
 	else 
 		{
 		BIO_write(out,title,strlen(title));
-		for (i=0; i<len; i++)
+		for (i=0; i<(int)len; i++)
 			{
 			if (sep && (i != 0))
 				BIO_printf(out, ":");
@@ -440,6 +542,10 @@ int do_fp(BIO *out, unsigned char *buf, BIO *bp, int sep, int binout,
 			}
 		BIO_printf(out, "\n");
 		}
+	if (hmac_key)
+		{
+		BIO_set_md_ctx(bmd,md_ctx);
+		}
 	return 0;
 	}
 

apps/dh.c

@@ -57,6 +57,7 @@
  * [including the GNU Public Licence.]
  */
 
+#include <openssl/opensslconf.h>	/* for OPENSSL_NO_DH */
 #ifndef OPENSSL_NO_DH
 #include <stdio.h>
 #include <stdlib.h>

apps/dhparam.c

@@ -109,6 +109,7 @@
  *
  */
 
+#include <openssl/opensslconf.h>	/* for OPENSSL_NO_DH */
 #ifndef OPENSSL_NO_DH
 #include <stdio.h>
 #include <stdlib.h>
@@ -142,7 +143,7 @@
  * -C
  */
 
-static void MS_CALLBACK dh_cb(int p, int n, void *arg);
+static int MS_CALLBACK dh_cb(int p, int n, BN_GENCB *cb);
 
 int MAIN(int, char **);
 
@@ -294,6 +295,8 @@ bad:
 
 	if(num) {
 
+		BN_GENCB cb;
+		BN_GENCB_set(&cb, dh_cb, bio_err);
 		if (!app_RAND_load_file(NULL, bio_err, 1) && inrand == NULL)
 			{
 			BIO_printf(bio_err,"warning, not much extra random data, consider using the -rand option\n");
@@ -305,12 +308,13 @@ bad:
 #ifndef OPENSSL_NO_DSA
 		if (dsaparam)
 			{
-			DSA *dsa;
+			DSA *dsa = DSA_new();
 			
 			BIO_printf(bio_err,"Generating DSA parameters, %d bit long prime\n",num);
-			dsa = DSA_generate_parameters(num, NULL, 0, NULL, NULL, dh_cb, bio_err);
+			if(!dsa || !DSA_generate_parameters_ex(dsa, num,
-			if (dsa == NULL)
+						NULL, 0, NULL, NULL, &cb))
 				{
+				if(dsa) DSA_free(dsa);
 				ERR_print_errors(bio_err);
 				goto end;
 				}
@@ -326,12 +330,12 @@ bad:
 		else
 #endif
 			{
+			dh = DH_new();
 			BIO_printf(bio_err,"Generating DH parameters, %d bit long safe prime, generator %d\n",num,g);
 			BIO_printf(bio_err,"This is going to take a long time\n");
-			dh=DH_generate_parameters(num,g,dh_cb,bio_err);
+			if(!dh || !DH_generate_parameters_ex(dh, num, g, &cb))
-			
-			if (dh == NULL)
 				{
+				if(dh) DH_free(dh);
 				ERR_print_errors(bio_err);
 				goto end;
 				}
@@ -534,7 +538,7 @@ end:
 	}
 
 /* dh_cb is identical to dsa_cb in apps/dsaparam.c */
-static void MS_CALLBACK dh_cb(int p, int n, void *arg)
+static int MS_CALLBACK dh_cb(int p, int n, BN_GENCB *cb)
 	{
 	char c='*';
 
@@ -542,11 +546,12 @@ static void MS_CALLBACK dh_cb(int p, int n, void *arg)
 	if (p == 1) c='+';
 	if (p == 2) c='*';
 	if (p == 3) c='\n';
-	BIO_write((BIO *)arg,&c,1);
+	BIO_write(cb->arg,&c,1);
-	(void)BIO_flush((BIO *)arg);
+	(void)BIO_flush(cb->arg);
 #ifdef LINT
 	p=n;
 #endif
+	return 1;
 	}
 
 #endif

apps/dsa.c

@@ -56,6 +56,7 @@
  * [including the GNU Public Licence.]
  */
 
+#include <openssl/opensslconf.h>	/* for OPENSSL_NO_DSA */
 #ifndef OPENSSL_NO_DSA
 #include <stdio.h>
 #include <stdlib.h>
@@ -68,6 +69,7 @@
 #include <openssl/evp.h>
 #include <openssl/x509.h>
 #include <openssl/pem.h>
+#include <openssl/bn.h>
 
 #undef PROG
 #define PROG	dsa_main
@@ -82,6 +84,10 @@
  * -aes128	- encrypt output if PEM format
  * -aes192	- encrypt output if PEM format
  * -aes256	- encrypt output if PEM format
+ * -camellia128 - encrypt output if PEM format
+ * -camellia192 - encrypt output if PEM format
+ * -camellia256 - encrypt output if PEM format
+ * -seed        - encrypt output if PEM format
  * -text	- print a text version
  * -modulus	- print the DSA public key
  */
@@ -209,6 +215,13 @@ bad:
 #ifndef OPENSSL_NO_AES
 		BIO_printf(bio_err," -aes128, -aes192, -aes256\n");
 		BIO_printf(bio_err,"                 encrypt PEM output with cbc aes\n");
+#endif
+#ifndef OPENSSL_NO_CAMELLIA
+		BIO_printf(bio_err," -camellia128, -camellia192, -camellia256\n");
+		BIO_printf(bio_err,"                 encrypt PEM output with cbc camellia\n");
+#endif
+#ifndef OPENSSL_NO_SEED
+		BIO_printf(bio_err," -seed           encrypt PEM output with cbc seed\n");
 #endif
 		BIO_printf(bio_err," -text           print the key in text\n");
 		BIO_printf(bio_err," -noout          don't print key out\n");
@@ -227,36 +240,26 @@ bad:
 		goto end;
 	}
 
-	in=BIO_new(BIO_s_file());
 	out=BIO_new(BIO_s_file());
-	if ((in == NULL) || (out == NULL))
+	if (out == NULL)
 		{
 		ERR_print_errors(bio_err);
 		goto end;
 		}
 
-	if (infile == NULL)
-		BIO_set_fp(in,stdin,BIO_NOCLOSE);
-	else
-		{
-		if (BIO_read_filename(in,infile) <= 0)
-			{
-			perror(infile);
-			goto end;
-			}
-		}
-
 	BIO_printf(bio_err,"read DSA key\n");
-	if	(informat == FORMAT_ASN1) {
-		if(pubin) dsa=d2i_DSA_PUBKEY_bio(in,NULL);
-		else dsa=d2i_DSAPrivateKey_bio(in,NULL);
-	} else if (informat == FORMAT_PEM) {
-		if(pubin) dsa=PEM_read_bio_DSA_PUBKEY(in,NULL, NULL, NULL);
-		else dsa=PEM_read_bio_DSAPrivateKey(in,NULL,NULL,passin);
-	} else
 	{
-		BIO_printf(bio_err,"bad input format specified for key\n");
+		EVP_PKEY	*pkey;
-		goto end;
+		if (pubin)
+			pkey = load_pubkey(bio_err, infile, informat, 1,
+				passin, e, "Public Key");
+		else
+			pkey = load_key(bio_err, infile, informat, 1,
+				passin, e, "Private Key");
+
+		if (pkey != NULL)
+		dsa = pkey == NULL ? NULL : EVP_PKEY_get1_DSA(pkey);
+		EVP_PKEY_free(pkey);
 	}
 	if (dsa == NULL)
 		{

apps/dsaparam.c

@@ -56,6 +56,13 @@
  * [including the GNU Public Licence.]
  */
 
+#include <openssl/opensslconf.h>	/* for OPENSSL_NO_DSA */
+/* Until the key-gen callbacks are modified to use newer prototypes, we allow
+ * deprecated functions for openssl-internal code */
+#ifdef OPENSSL_NO_DEPRECATED
+#undef OPENSSL_NO_DEPRECATED
+#endif
+
 #ifndef OPENSSL_NO_DSA
 #include <assert.h>
 #include <stdio.h>
@@ -82,9 +89,23 @@
  * -C
  * -noout
  * -genkey
+ *  #ifdef GENCB_TEST
+ * -timebomb n  - interrupt keygen after <n> seconds
+ *  #endif
  */
 
-static void MS_CALLBACK dsa_cb(int p, int n, void *arg);
+#ifdef GENCB_TEST
+
+static int stop_keygen_flag = 0;
+
+static void timebomb_sigalarm(int foo)
+	{
+	stop_keygen_flag = 1;
+	}
+
+#endif
+
+static int MS_CALLBACK dsa_cb(int p, int n, BN_GENCB *cb);
 
 int MAIN(int, char **);
 
@@ -103,6 +124,9 @@ int MAIN(int argc, char **argv)
 #ifndef OPENSSL_NO_ENGINE
 	char *engine=NULL;
 #endif
+#ifdef GENCB_TEST
+	int timebomb=0;
+#endif
 
 	apps_startup();
 
@@ -149,6 +173,13 @@ int MAIN(int argc, char **argv)
 			if (--argc < 1) goto bad;
 			engine = *(++argv);
 			}
+#endif
+#ifdef GENCB_TEST
+		else if(strcmp(*argv, "-timebomb") == 0)
+			{
+			if (--argc < 1) goto bad;
+			timebomb = atoi(*(++argv));
+			}
 #endif
 		else if (strcmp(*argv,"-text") == 0)
 			text=1;
@@ -199,6 +230,9 @@ bad:
 		BIO_printf(bio_err," -rand         files to use for random number input\n");
 #ifndef OPENSSL_NO_ENGINE
 		BIO_printf(bio_err," -engine e     use engine e, possibly a hardware device.\n");
+#endif
+#ifdef GENCB_TEST
+		BIO_printf(bio_err," -timebomb n   interrupt keygen after <n> seconds\n");
 #endif
 		BIO_printf(bio_err," number        number of bits to use for generating private key\n");
 		goto end;
@@ -257,10 +291,47 @@ bad:
 
 	if (numbits > 0)
 		{
+		BN_GENCB cb;
+		BN_GENCB_set(&cb, dsa_cb, bio_err);
 		assert(need_rand);
+		dsa = DSA_new();
+		if(!dsa)
+			{
+			BIO_printf(bio_err,"Error allocating DSA object\n");
+			goto end;
+			}
 		BIO_printf(bio_err,"Generating DSA parameters, %d bit long prime\n",num);
 	        BIO_printf(bio_err,"This could take some time\n");
-	        dsa=DSA_generate_parameters(num,NULL,0,NULL,NULL, dsa_cb,bio_err);
+#ifdef GENCB_TEST
+		if(timebomb > 0)
+	{
+		struct sigaction act;
+		act.sa_handler = timebomb_sigalarm;
+		act.sa_flags = 0;
+		BIO_printf(bio_err,"(though I'll stop it if not done within %d secs)\n",
+				timebomb);
+		if(sigaction(SIGALRM, &act, NULL) != 0)
+			{
+			BIO_printf(bio_err,"Error, couldn't set SIGALRM handler\n");
+			goto end;
+			}
+		alarm(timebomb);
+	}
+#endif
+	        if(!DSA_generate_parameters_ex(dsa,num,NULL,0,NULL,NULL, &cb))
+			{
+#ifdef GENCB_TEST
+			if(stop_keygen_flag)
+				{
+				BIO_printf(bio_err,"DSA key generation time-stopped\n");
+				/* This is an asked-for behaviour! */
+				ret = 0;
+				goto end;
+				}
+#endif
+			BIO_printf(bio_err,"Error, DSA key generation failed\n");
+			goto end;
+			}
 		}
 	else if	(informat == FORMAT_ASN1)
 		dsa=d2i_DSAparams_bio(in,NULL);
@@ -385,7 +456,7 @@ end:
 	OPENSSL_EXIT(ret);
 	}
 
-static void MS_CALLBACK dsa_cb(int p, int n, void *arg)
+static int MS_CALLBACK dsa_cb(int p, int n, BN_GENCB *cb)
 	{
 	char c='*';
 
@@ -393,10 +464,15 @@ static void MS_CALLBACK dsa_cb(int p, int n, void *arg)
 	if (p == 1) c='+';
 	if (p == 2) c='*';
 	if (p == 3) c='\n';
-	BIO_write(arg,&c,1);
+	BIO_write(cb->arg,&c,1);
-	(void)BIO_flush(arg);
+	(void)BIO_flush(cb->arg);
 #ifdef LINT
 	p=n;
 #endif
+#ifdef GENCB_TEST
+	if(stop_keygen_flag)
+		return 0;
+#endif
+	return 1;
 	}
 #endif

apps/ec.c

@@ -0,0 +1,403 @@
+/* apps/ec.c */
+/*
+ * Written by Nils Larsch for the OpenSSL project.
+ */
+/* ====================================================================
+ * Copyright (c) 1998-2005 The OpenSSL Project.  All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer. 
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ *
+ * 3. All advertising materials mentioning features or use of this
+ *    software must display the following acknowledgment:
+ *    "This product includes software developed by the OpenSSL Project
+ *    for use in the OpenSSL Toolkit. (http://www.openssl.org/)"
+ *
+ * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
+ *    endorse or promote products derived from this software without
+ *    prior written permission. For written permission, please contact
+ *    openssl-core@openssl.org.
+ *
+ * 5. Products derived from this software may not be called "OpenSSL"
+ *    nor may "OpenSSL" appear in their names without prior written
+ *    permission of the OpenSSL Project.
+ *
+ * 6. Redistributions of any form whatsoever must retain the following
+ *    acknowledgment:
+ *    "This product includes software developed by the OpenSSL Project
+ *    for use in the OpenSSL Toolkit (http://www.openssl.org/)"
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
+ * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
+ * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE OpenSSL PROJECT OR
+ * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
+ * OF THE POSSIBILITY OF SUCH DAMAGE.
+ * ====================================================================
+ *
+ * This product includes cryptographic software written by Eric Young
+ * (eay@cryptsoft.com).  This product includes software written by Tim
+ * Hudson (tjh@cryptsoft.com).
+ *
+ */
+
+#include <openssl/opensslconf.h>
+#ifndef OPENSSL_NO_EC
+#include <stdio.h>
+#include <stdlib.h>
+#include <string.h>
+#include "apps.h"
+#include <openssl/bio.h>
+#include <openssl/err.h>
+#include <openssl/evp.h>
+#include <openssl/pem.h>
+
+#undef PROG
+#define PROG	ec_main
+
+/* -inform arg    - input format - default PEM (one of DER, NET or PEM)
+ * -outform arg   - output format - default PEM
+ * -in arg        - input file - default stdin
+ * -out arg       - output file - default stdout
+ * -des           - encrypt output if PEM format with DES in cbc mode
+ * -text          - print a text version
+ * -param_out     - print the elliptic curve parameters
+ * -conv_form arg - specifies the point encoding form
+ * -param_enc arg - specifies the parameter encoding
+ */
+
+int MAIN(int, char **);
+
+int MAIN(int argc, char **argv)
+{
+#ifndef OPENSSL_NO_ENGINE
+	ENGINE 	*e = NULL;
+#endif
+	int 	ret = 1;
+	EC_KEY 	*eckey = NULL;
+	const EC_GROUP *group;
+	int 	i, badops = 0;
+	const EVP_CIPHER *enc = NULL;
+	BIO 	*in = NULL, *out = NULL;
+	int 	informat, outformat, text=0, noout=0;
+	int  	pubin = 0, pubout = 0, param_out = 0;
+	char 	*infile, *outfile, *prog, *engine;
+	char 	*passargin = NULL, *passargout = NULL;
+	char 	*passin = NULL, *passout = NULL;
+	point_conversion_form_t form = POINT_CONVERSION_UNCOMPRESSED;
+	int	new_form = 0;
+	int	asn1_flag = OPENSSL_EC_NAMED_CURVE;
+	int 	new_asn1_flag = 0;
+
+	apps_startup();
+
+	if (bio_err == NULL)
+		if ((bio_err=BIO_new(BIO_s_file())) != NULL)
+			BIO_set_fp(bio_err, stderr, BIO_NOCLOSE|BIO_FP_TEXT);
+
+	if (!load_config(bio_err, NULL))
+		goto end;
+
+	engine = NULL;
+	infile = NULL;
+	outfile = NULL;
+	informat = FORMAT_PEM;
+	outformat = FORMAT_PEM;
+
+	prog = argv[0];
+	argc--;
+	argv++;
+	while (argc >= 1)
+		{
+		if (strcmp(*argv,"-inform") == 0)
+			{
+			if (--argc < 1) goto bad;
+			informat=str2fmt(*(++argv));
+			}
+		else if (strcmp(*argv,"-outform") == 0)
+			{
+			if (--argc < 1) goto bad;
+			outformat=str2fmt(*(++argv));
+			}
+		else if (strcmp(*argv,"-in") == 0)
+			{
+			if (--argc < 1) goto bad;
+			infile= *(++argv);
+			}
+		else if (strcmp(*argv,"-out") == 0)
+			{
+			if (--argc < 1) goto bad;
+			outfile= *(++argv);
+			}
+		else if (strcmp(*argv,"-passin") == 0)
+			{
+			if (--argc < 1) goto bad;
+			passargin= *(++argv);
+			}
+		else if (strcmp(*argv,"-passout") == 0)
+			{
+			if (--argc < 1) goto bad;
+			passargout= *(++argv);
+			}
+		else if (strcmp(*argv, "-engine") == 0)
+			{
+			if (--argc < 1) goto bad;
+			engine= *(++argv);
+			}
+		else if (strcmp(*argv, "-noout") == 0)
+			noout = 1;
+		else if (strcmp(*argv, "-text") == 0)
+			text = 1;
+		else if (strcmp(*argv, "-conv_form") == 0)
+			{
+			if (--argc < 1)
+				goto bad;
+			++argv;
+			new_form = 1;
+			if (strcmp(*argv, "compressed") == 0)
+				form = POINT_CONVERSION_COMPRESSED;
+			else if (strcmp(*argv, "uncompressed") == 0)
+				form = POINT_CONVERSION_UNCOMPRESSED;
+			else if (strcmp(*argv, "hybrid") == 0)
+				form = POINT_CONVERSION_HYBRID;
+			else
+				goto bad;
+			}
+		else if (strcmp(*argv, "-param_enc") == 0)
+			{
+			if (--argc < 1)
+				goto bad;
+			++argv;
+			new_asn1_flag = 1;
+			if (strcmp(*argv, "named_curve") == 0)
+				asn1_flag = OPENSSL_EC_NAMED_CURVE;
+			else if (strcmp(*argv, "explicit") == 0)
+				asn1_flag = 0;
+			else
+				goto bad;
+			}
+		else if (strcmp(*argv, "-param_out") == 0)
+			param_out = 1;
+		else if (strcmp(*argv, "-pubin") == 0)
+			pubin=1;
+		else if (strcmp(*argv, "-pubout") == 0)
+			pubout=1;
+		else if ((enc=EVP_get_cipherbyname(&(argv[0][1]))) == NULL)
+			{
+			BIO_printf(bio_err, "unknown option %s\n", *argv);
+			badops=1;
+			break;
+			}
+		argc--;
+		argv++;
+		}
+
+	if (badops)
+		{
+bad:
+		BIO_printf(bio_err, "%s [options] <infile >outfile\n", prog);
+		BIO_printf(bio_err, "where options are\n");
+		BIO_printf(bio_err, " -inform arg     input format - "
+				"DER or PEM\n");
+		BIO_printf(bio_err, " -outform arg    output format - "
+				"DER or PEM\n");
+		BIO_printf(bio_err, " -in arg         input file\n");
+		BIO_printf(bio_err, " -passin arg     input file pass "
+				"phrase source\n");
+		BIO_printf(bio_err, " -out arg        output file\n");
+		BIO_printf(bio_err, " -passout arg    output file pass "
+				"phrase source\n");
+		BIO_printf(bio_err, " -engine e       use engine e, "
+				"possibly a hardware device.\n");
+		BIO_printf(bio_err, " -des            encrypt PEM output, "
+				"instead of 'des' every other \n"
+				"                 cipher "
+				"supported by OpenSSL can be used\n");
+		BIO_printf(bio_err, " -text           print the key\n");
+		BIO_printf(bio_err, " -noout          don't print key out\n");
+		BIO_printf(bio_err, " -param_out      print the elliptic "
+				"curve parameters\n");
+		BIO_printf(bio_err, " -conv_form arg  specifies the "
+				"point conversion form \n");
+		BIO_printf(bio_err, "                 possible values:"
+				" compressed\n");
+		BIO_printf(bio_err, "                                 "
+				" uncompressed (default)\n");
+		BIO_printf(bio_err, "                                  "
+				" hybrid\n");
+		BIO_printf(bio_err, " -param_enc arg  specifies the way"
+				" the ec parameters are encoded\n");
+		BIO_printf(bio_err, "                 in the asn1 der "
+				"encoding\n");
+		BIO_printf(bio_err, "                 possible values:"
+				" named_curve (default)\n");
+		BIO_printf(bio_err,"                                  "
+				"explicit\n");
+		goto end;
+		}
+
+	ERR_load_crypto_strings();
+
+#ifndef OPENSSL_NO_ENGINE
+        e = setup_engine(bio_err, engine, 0);
+#endif
+
+	if(!app_passwd(bio_err, passargin, passargout, &passin, &passout)) 
+		{
+		BIO_printf(bio_err, "Error getting passwords\n");
+		goto end;
+		}
+
+	in = BIO_new(BIO_s_file());
+	out = BIO_new(BIO_s_file());
+	if ((in == NULL) || (out == NULL))
+		{
+		ERR_print_errors(bio_err);
+		goto end;
+		}
+
+	if (infile == NULL)
+		BIO_set_fp(in, stdin, BIO_NOCLOSE);
+	else
+		{
+		if (BIO_read_filename(in, infile) <= 0)
+			{
+			perror(infile);
+			goto end;
+			}
+		}
+
+	BIO_printf(bio_err, "read EC key\n");
+	if (informat == FORMAT_ASN1) 
+		{
+		if (pubin) 
+			eckey = d2i_EC_PUBKEY_bio(in, NULL);
+		else 
+			eckey = d2i_ECPrivateKey_bio(in, NULL);
+		} 
+	else if (informat == FORMAT_PEM) 
+		{
+		if (pubin) 
+			eckey = PEM_read_bio_EC_PUBKEY(in, NULL, NULL, 
+				NULL);
+		else 
+			eckey = PEM_read_bio_ECPrivateKey(in, NULL, NULL,
+				passin);
+		} 
+	else
+		{
+		BIO_printf(bio_err, "bad input format specified for key\n");
+		goto end;
+		}
+	if (eckey == NULL)
+		{
+		BIO_printf(bio_err,"unable to load Key\n");
+		ERR_print_errors(bio_err);
+		goto end;
+		}
+
+	if (outfile == NULL)
+		{
+		BIO_set_fp(out, stdout, BIO_NOCLOSE);
+#ifdef OPENSSL_SYS_VMS
+			{
+			BIO *tmpbio = BIO_new(BIO_f_linebuffer());
+			out = BIO_push(tmpbio, out);
+			}
+#endif
+		}
+	else
+		{
+		if (BIO_write_filename(out, outfile) <= 0)
+			{
+			perror(outfile);
+			goto end;
+			}
+		}
+
+	group = EC_KEY_get0_group(eckey);
+
+	if (new_form)
+		EC_KEY_set_conv_form(eckey, form);
+
+	if (new_asn1_flag)
+		EC_KEY_set_asn1_flag(eckey, asn1_flag);
+
+	if (text) 
+		if (!EC_KEY_print(out, eckey, 0))
+			{
+			perror(outfile);
+			ERR_print_errors(bio_err);
+			goto end;
+			}
+
+	if (noout) 
+		{
+		ret = 0;
+		goto end;
+		}
+
+	BIO_printf(bio_err, "writing EC key\n");
+	if (outformat == FORMAT_ASN1) 
+		{
+		if (param_out)
+			i = i2d_ECPKParameters_bio(out, group);
+		else if (pubin || pubout) 
+			i = i2d_EC_PUBKEY_bio(out, eckey);
+		else 
+			i = i2d_ECPrivateKey_bio(out, eckey);
+		} 
+	else if (outformat == FORMAT_PEM) 
+		{
+		if (param_out)
+			i = PEM_write_bio_ECPKParameters(out, group);
+		else if (pubin || pubout)
+			i = PEM_write_bio_EC_PUBKEY(out, eckey);
+		else 
+			i = PEM_write_bio_ECPrivateKey(out, eckey, enc,
+						NULL, 0, NULL, passout);
+		} 
+	else 
+		{
+		BIO_printf(bio_err, "bad output format specified for "
+			"outfile\n");
+		goto end;
+		}
+
+	if (!i)
+		{
+		BIO_printf(bio_err, "unable to write private key\n");
+		ERR_print_errors(bio_err);
+		}
+	else
+		ret=0;
+end:
+	if (in)
+		BIO_free(in);
+	if (out)
+		BIO_free_all(out);
+	if (eckey)
+		EC_KEY_free(eckey);
+	if (passin)
+		OPENSSL_free(passin);
+	if (passout)
+		OPENSSL_free(passout);
+	apps_shutdown();
+	OPENSSL_EXIT(ret);
+}
+#endif

apps/ecparam.c

@@ -0,0 +1,728 @@
+/* apps/ecparam.c */
+/*
+ * Written by Nils Larsch for the OpenSSL project.
+ */
+/* ====================================================================
+ * Copyright (c) 1998-2005 The OpenSSL Project.  All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer. 
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ *
+ * 3. All advertising materials mentioning features or use of this
+ *    software must display the following acknowledgment:
+ *    "This product includes software developed by the OpenSSL Project
+ *    for use in the OpenSSL Toolkit. (http://www.openssl.org/)"
+ *
+ * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
+ *    endorse or promote products derived from this software without
+ *    prior written permission. For written permission, please contact
+ *    openssl-core@openssl.org.
+ *
+ * 5. Products derived from this software may not be called "OpenSSL"
+ *    nor may "OpenSSL" appear in their names without prior written
+ *    permission of the OpenSSL Project.
+ *
+ * 6. Redistributions of any form whatsoever must retain the following
+ *    acknowledgment:
+ *    "This product includes software developed by the OpenSSL Project
+ *    for use in the OpenSSL Toolkit (http://www.openssl.org/)"
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
+ * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
+ * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE OpenSSL PROJECT OR
+ * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
+ * OF THE POSSIBILITY OF SUCH DAMAGE.
+ * ====================================================================
+ *
+ * This product includes cryptographic software written by Eric Young
+ * (eay@cryptsoft.com).  This product includes software written by Tim
+ * Hudson (tjh@cryptsoft.com).
+ *
+ */
+/* ====================================================================
+ * Copyright 2002 Sun Microsystems, Inc. ALL RIGHTS RESERVED.
+ *
+ * Portions of the attached software ("Contribution") are developed by 
+ * SUN MICROSYSTEMS, INC., and are contributed to the OpenSSL project.
+ *
+ * The Contribution is licensed pursuant to the OpenSSL open source
+ * license provided above.
+ *
+ * The elliptic curve binary polynomial software is originally written by 
+ * Sheueling Chang Shantz and Douglas Stebila of Sun Microsystems Laboratories.
+ *
+ */
+
+#include <openssl/opensslconf.h>
+#ifndef OPENSSL_NO_EC
+#include <assert.h>
+#include <stdio.h>
+#include <stdlib.h>
+#include <time.h>
+#include <string.h>
+#include "apps.h"
+#include <openssl/bio.h>
+#include <openssl/err.h>
+#include <openssl/bn.h>
+#include <openssl/ec.h>
+#include <openssl/x509.h>
+#include <openssl/pem.h>
+
+#undef PROG
+#define PROG	ecparam_main
+
+/* -inform arg      - input format - default PEM (DER or PEM)
+ * -outform arg     - output format - default PEM
+ * -in  arg         - input file  - default stdin
+ * -out arg         - output file - default stdout
+ * -noout           - do not print the ec parameter
+ * -text            - print the ec parameters in text form
+ * -check           - validate the ec parameters
+ * -C               - print a 'C' function creating the parameters
+ * -name arg        - use the ec parameters with 'short name' name
+ * -list_curves     - prints a list of all currently available curve 'short names'
+ * -conv_form arg   - specifies the point conversion form 
+ *                  - possible values: compressed
+ *                                     uncompressed (default)
+ *                                     hybrid
+ * -param_enc arg   - specifies the way the ec parameters are encoded
+ *                    in the asn1 der encoding
+ *                    possible values: named_curve (default)
+ *                                     explicit
+ * -no_seed         - if 'explicit' parameters are choosen do not use the seed
+ * -genkey          - generate ec key
+ * -rand file       - files to use for random number input
+ * -engine e        - use engine e, possibly a hardware device
+ */
+
+
+static int ecparam_print_var(BIO *,BIGNUM *,const char *,int,unsigned char *);
+
+int MAIN(int, char **);
+
+int MAIN(int argc, char **argv)
+	{
+	EC_GROUP *group = NULL;
+	point_conversion_form_t form = POINT_CONVERSION_UNCOMPRESSED; 
+	int 	new_form = 0;
+	int 	asn1_flag = OPENSSL_EC_NAMED_CURVE;
+	int 	new_asn1_flag = 0;
+	char 	*curve_name = NULL, *inrand = NULL;
+	int	list_curves = 0, no_seed = 0, check = 0,
+		badops = 0, text = 0, i, need_rand = 0, genkey = 0;
+	char	*infile = NULL, *outfile = NULL, *prog;
+	BIO 	*in = NULL, *out = NULL;
+	int 	informat, outformat, noout = 0, C = 0, ret = 1;
+#ifndef OPENSSL_NO_ENGINE
+	ENGINE	*e = NULL;
+#endif
+	char	*engine = NULL;
+
+	BIGNUM	*ec_p = NULL, *ec_a = NULL, *ec_b = NULL,
+		*ec_gen = NULL, *ec_order = NULL, *ec_cofactor = NULL;
+	unsigned char *buffer = NULL;
+
+	apps_startup();
+
+	if (bio_err == NULL)
+		if ((bio_err=BIO_new(BIO_s_file())) != NULL)
+			BIO_set_fp(bio_err,stderr,BIO_NOCLOSE|BIO_FP_TEXT);
+
+	if (!load_config(bio_err, NULL))
+		goto end;
+
+	informat=FORMAT_PEM;
+	outformat=FORMAT_PEM;
+
+	prog=argv[0];
+	argc--;
+	argv++;
+	while (argc >= 1)
+		{
+		if 	(strcmp(*argv,"-inform") == 0)
+			{
+			if (--argc < 1) goto bad;
+			informat=str2fmt(*(++argv));
+			}
+		else if (strcmp(*argv,"-outform") == 0)
+			{
+			if (--argc < 1) goto bad;
+			outformat=str2fmt(*(++argv));
+			}
+		else if (strcmp(*argv,"-in") == 0)
+			{
+			if (--argc < 1) goto bad;
+			infile= *(++argv);
+			}
+		else if (strcmp(*argv,"-out") == 0)
+			{
+			if (--argc < 1) goto bad;
+			outfile= *(++argv);
+			}
+		else if (strcmp(*argv,"-text") == 0)
+			text = 1;
+		else if (strcmp(*argv,"-C") == 0)
+			C = 1;
+		else if (strcmp(*argv,"-check") == 0)
+			check = 1;
+		else if (strcmp (*argv, "-name") == 0)
+			{
+			if (--argc < 1)
+				goto bad;
+			curve_name = *(++argv);
+			}
+		else if (strcmp(*argv, "-list_curves") == 0)
+			list_curves = 1;
+		else if (strcmp(*argv, "-conv_form") == 0)
+			{
+			if (--argc < 1)
+				goto bad;
+			++argv;
+			new_form = 1;
+			if (strcmp(*argv, "compressed") == 0)
+				form = POINT_CONVERSION_COMPRESSED;
+			else if (strcmp(*argv, "uncompressed") == 0)
+				form = POINT_CONVERSION_UNCOMPRESSED;
+			else if (strcmp(*argv, "hybrid") == 0)
+				form = POINT_CONVERSION_HYBRID;
+			else
+				goto bad;
+			}
+		else if (strcmp(*argv, "-param_enc") == 0)
+			{
+			if (--argc < 1)
+				goto bad;
+			++argv;
+			new_asn1_flag = 1;
+			if (strcmp(*argv, "named_curve") == 0)
+				asn1_flag = OPENSSL_EC_NAMED_CURVE;
+			else if (strcmp(*argv, "explicit") == 0)
+				asn1_flag = 0;
+			else
+				goto bad;
+			}
+		else if (strcmp(*argv, "-no_seed") == 0)
+			no_seed = 1;
+		else if (strcmp(*argv, "-noout") == 0)
+			noout=1;
+		else if (strcmp(*argv,"-genkey") == 0)
+			{
+			genkey=1;
+			need_rand=1;
+			}
+		else if (strcmp(*argv, "-rand") == 0)
+			{
+			if (--argc < 1) goto bad;
+			inrand= *(++argv);
+			need_rand=1;
+			}
+		else if(strcmp(*argv, "-engine") == 0)
+			{
+			if (--argc < 1) goto bad;
+			engine = *(++argv);
+			}	
+		else
+			{
+			BIO_printf(bio_err,"unknown option %s\n",*argv);
+			badops=1;
+			break;
+			}
+		argc--;
+		argv++;
+		}
+
+	if (badops)
+		{
+bad:
+		BIO_printf(bio_err, "%s [options] <infile >outfile\n",prog);
+		BIO_printf(bio_err, "where options are\n");
+		BIO_printf(bio_err, " -inform arg       input format - "
+				"default PEM (DER or PEM)\n");
+		BIO_printf(bio_err, " -outform arg      output format - "
+				"default PEM\n");
+		BIO_printf(bio_err, " -in  arg          input file  - "
+				"default stdin\n");
+		BIO_printf(bio_err, " -out arg          output file - "
+				"default stdout\n");
+		BIO_printf(bio_err, " -noout            do not print the "
+				"ec parameter\n");
+		BIO_printf(bio_err, " -text             print the ec "
+				"parameters in text form\n");
+		BIO_printf(bio_err, " -check            validate the ec "
+				"parameters\n");
+		BIO_printf(bio_err, " -C                print a 'C' "
+				"function creating the parameters\n");
+		BIO_printf(bio_err, " -name arg         use the "
+				"ec parameters with 'short name' name\n");
+		BIO_printf(bio_err, " -list_curves      prints a list of "
+				"all currently available curve 'short names'\n");
+		BIO_printf(bio_err, " -conv_form arg    specifies the "
+				"point conversion form \n");
+		BIO_printf(bio_err, "                   possible values:"
+				" compressed\n");
+		BIO_printf(bio_err, "                                   "
+				" uncompressed (default)\n");
+		BIO_printf(bio_err, "                                   "
+				" hybrid\n");
+		BIO_printf(bio_err, " -param_enc arg    specifies the way"
+				" the ec parameters are encoded\n");
+		BIO_printf(bio_err, "                   in the asn1 der "
+				"encoding\n");
+		BIO_printf(bio_err, "                   possible values:"
+				" named_curve (default)\n");
+		BIO_printf(bio_err, "                                   "
+				" explicit\n");
+		BIO_printf(bio_err, " -no_seed          if 'explicit'"
+				" parameters are choosen do not"
+				" use the seed\n");
+		BIO_printf(bio_err, " -genkey           generate ec"
+				" key\n");
+		BIO_printf(bio_err, " -rand file        files to use for"
+				" random number input\n");
+		BIO_printf(bio_err, " -engine e         use engine e, "
+				"possibly a hardware device\n");
+		goto end;
+		}
+
+	ERR_load_crypto_strings();
+
+	in=BIO_new(BIO_s_file());
+	out=BIO_new(BIO_s_file());
+	if ((in == NULL) || (out == NULL))
+		{
+		ERR_print_errors(bio_err);
+		goto end;
+		}
+
+	if (infile == NULL)
+		BIO_set_fp(in,stdin,BIO_NOCLOSE);
+	else
+		{
+		if (BIO_read_filename(in,infile) <= 0)
+			{
+			perror(infile);
+			goto end;
+			}
+		}
+	if (outfile == NULL)
+		{
+		BIO_set_fp(out,stdout,BIO_NOCLOSE);
+#ifdef OPENSSL_SYS_VMS
+		{
+		BIO *tmpbio = BIO_new(BIO_f_linebuffer());
+		out = BIO_push(tmpbio, out);
+		}
+#endif
+		}
+	else
+		{
+		if (BIO_write_filename(out,outfile) <= 0)
+			{
+			perror(outfile);
+			goto end;
+			}
+		}
+
+#ifndef OPENSSL_NO_ENGINE
+	e = setup_engine(bio_err, engine, 0);
+#endif
+
+	if (list_curves)
+		{
+		EC_builtin_curve *curves = NULL;
+		size_t crv_len = 0;
+		size_t n = 0;
+
+		crv_len = EC_get_builtin_curves(NULL, 0);
+
+		curves = OPENSSL_malloc((int)(sizeof(EC_builtin_curve) * crv_len));
+
+		if (curves == NULL)
+			goto end;
+
+		if (!EC_get_builtin_curves(curves, crv_len))
+			{
+			OPENSSL_free(curves);
+			goto end;
+			}
+
+		
+		for (n = 0; n < crv_len; n++)
+			{
+			const char *comment;
+			const char *sname;
+			comment = curves[n].comment;
+			sname   = OBJ_nid2sn(curves[n].nid);
+			if (comment == NULL)
+				comment = "CURVE DESCRIPTION NOT AVAILABLE";
+			if (sname == NULL)
+				sname = "";
+
+			BIO_printf(out, "  %-10s: ", sname);
+			BIO_printf(out, "%s\n", comment);
+			} 
+
+		OPENSSL_free(curves);
+		ret = 0;
+		goto end;
+		}
+
+	if (curve_name != NULL)
+		{
+		int nid;
+
+		/* workaround for the SECG curve names secp192r1
+		 * and secp256r1 (which are the same as the curves
+		 * prime192v1 and prime256v1 defined in X9.62)
+		 */
+		if (!strcmp(curve_name, "secp192r1"))
+			{
+			BIO_printf(bio_err, "using curve name prime192v1 "
+				"instead of secp192r1\n");
+			nid = NID_X9_62_prime192v1;
+			}
+		else if (!strcmp(curve_name, "secp256r1"))
+			{
+			BIO_printf(bio_err, "using curve name prime256v1 "
+				"instead of secp256r1\n");
+			nid = NID_X9_62_prime256v1;
+			}
+		else
+			nid = OBJ_sn2nid(curve_name);
+	
+		if (nid == 0)
+			{
+			BIO_printf(bio_err, "unknown curve name (%s)\n", 
+				curve_name);
+			goto end;
+			}
+
+		group = EC_GROUP_new_by_curve_name(nid);
+		if (group == NULL)
+			{
+			BIO_printf(bio_err, "unable to create curve (%s)\n", 
+				curve_name);
+			goto end;
+			}
+		EC_GROUP_set_asn1_flag(group, asn1_flag);
+		EC_GROUP_set_point_conversion_form(group, form);
+		}
+	else if (informat == FORMAT_ASN1)
+		{
+		group = d2i_ECPKParameters_bio(in, NULL);
+		}
+	else if (informat == FORMAT_PEM)
+		{
+		group = PEM_read_bio_ECPKParameters(in,NULL,NULL,NULL);
+		}
+	else
+		{
+		BIO_printf(bio_err, "bad input format specified\n");
+		goto end;
+		}
+
+	if (group == NULL)
+		{
+		BIO_printf(bio_err, 
+			"unable to load elliptic curve parameters\n");
+		ERR_print_errors(bio_err);
+		goto end;
+		}
+
+	if (new_form)
+		EC_GROUP_set_point_conversion_form(group, form);
+
+	if (new_asn1_flag)
+		EC_GROUP_set_asn1_flag(group, asn1_flag);
+
+	if (no_seed)
+		{
+		EC_GROUP_set_seed(group, NULL, 0);
+		}
+
+	if (text)
+		{
+		if (!ECPKParameters_print(out, group, 0))
+			goto end;
+		}
+
+	if (check)
+		{
+		if (group == NULL)
+			BIO_printf(bio_err, "no elliptic curve parameters\n");
+		BIO_printf(bio_err, "checking elliptic curve parameters: ");
+		if (!EC_GROUP_check(group, NULL))
+			{
+			BIO_printf(bio_err, "failed\n");
+			ERR_print_errors(bio_err);
+			}
+		else
+			BIO_printf(bio_err, "ok\n");
+			
+		}
+
+	if (C)
+		{
+		size_t	buf_len = 0, tmp_len = 0;
+		const EC_POINT *point;
+		int	is_prime, len = 0;
+		const EC_METHOD *meth = EC_GROUP_method_of(group);
+
+		if ((ec_p = BN_new()) == NULL || (ec_a = BN_new()) == NULL ||
+		    (ec_b = BN_new()) == NULL || (ec_gen = BN_new()) == NULL ||
+		    (ec_order = BN_new()) == NULL || 
+		    (ec_cofactor = BN_new()) == NULL )
+			{
+			perror("OPENSSL_malloc");
+			goto end;
+			}
+
+		is_prime = (EC_METHOD_get_field_type(meth) == 
+			NID_X9_62_prime_field);
+
+		if (is_prime)
+			{
+			if (!EC_GROUP_get_curve_GFp(group, ec_p, ec_a,
+				ec_b, NULL))
+				goto end;
+			}
+		else
+			{
+			/* TODO */
+			goto end;
+			}
+
+		if ((point = EC_GROUP_get0_generator(group)) == NULL)
+			goto end;
+		if (!EC_POINT_point2bn(group, point, 
+			EC_GROUP_get_point_conversion_form(group), ec_gen, 
+			NULL))
+			goto end;
+		if (!EC_GROUP_get_order(group, ec_order, NULL))
+			goto end;
+		if (!EC_GROUP_get_cofactor(group, ec_cofactor, NULL))
+			goto end;
+
+		if (!ec_p || !ec_a || !ec_b || !ec_gen || 
+			!ec_order || !ec_cofactor)
+			goto end;
+
+		len = BN_num_bits(ec_order);
+
+		if ((tmp_len = (size_t)BN_num_bytes(ec_p)) > buf_len)
+			buf_len = tmp_len;
+		if ((tmp_len = (size_t)BN_num_bytes(ec_a)) > buf_len)
+			buf_len = tmp_len;
+		if ((tmp_len = (size_t)BN_num_bytes(ec_b)) > buf_len)
+			buf_len = tmp_len;
+		if ((tmp_len = (size_t)BN_num_bytes(ec_gen)) > buf_len)
+			buf_len = tmp_len;
+		if ((tmp_len = (size_t)BN_num_bytes(ec_order)) > buf_len)
+			buf_len = tmp_len;
+		if ((tmp_len = (size_t)BN_num_bytes(ec_cofactor)) > buf_len)
+			buf_len = tmp_len;
+
+		buffer = (unsigned char *)OPENSSL_malloc(buf_len);
+
+		if (buffer == NULL)
+			{
+			perror("OPENSSL_malloc");
+			goto end;
+			}
+
+		ecparam_print_var(out, ec_p, "ec_p", len, buffer);
+		ecparam_print_var(out, ec_a, "ec_a", len, buffer);
+		ecparam_print_var(out, ec_b, "ec_b", len, buffer);
+		ecparam_print_var(out, ec_gen, "ec_gen", len, buffer);
+		ecparam_print_var(out, ec_order, "ec_order", len, buffer);
+		ecparam_print_var(out, ec_cofactor, "ec_cofactor", len, 
+			buffer);
+
+		BIO_printf(out, "\n\n");
+
+		BIO_printf(out, "EC_GROUP *get_ec_group_%d(void)\n\t{\n", len);
+		BIO_printf(out, "\tint ok=0;\n");
+		BIO_printf(out, "\tEC_GROUP *group = NULL;\n");
+		BIO_printf(out, "\tEC_POINT *point = NULL;\n");
+		BIO_printf(out, "\tBIGNUM   *tmp_1 = NULL, *tmp_2 = NULL, "
+				"*tmp_3 = NULL;\n\n");
+		BIO_printf(out, "\tif ((tmp_1 = BN_bin2bn(ec_p_%d, "
+				"sizeof(ec_p_%d), NULL)) == NULL)\n\t\t"
+				"goto err;\n", len, len);
+		BIO_printf(out, "\tif ((tmp_2 = BN_bin2bn(ec_a_%d, "
+				"sizeof(ec_a_%d), NULL)) == NULL)\n\t\t"
+				"goto err;\n", len, len);
+		BIO_printf(out, "\tif ((tmp_3 = BN_bin2bn(ec_b_%d, "
+				"sizeof(ec_b_%d), NULL)) == NULL)\n\t\t"
+				"goto err;\n", len, len);
+		if (is_prime)
+			{
+			BIO_printf(out, "\tif ((group = EC_GROUP_new_curve_"
+				"GFp(tmp_1, tmp_2, tmp_3, NULL)) == NULL)"
+				"\n\t\tgoto err;\n\n");
+			}
+		else
+			{
+			/* TODO */
+			goto end;
+			}
+		BIO_printf(out, "\t/* build generator */\n");
+		BIO_printf(out, "\tif ((tmp_1 = BN_bin2bn(ec_gen_%d, "
+				"sizeof(ec_gen_%d), tmp_1)) == NULL)"
+				"\n\t\tgoto err;\n", len, len);
+		BIO_printf(out, "\tpoint = EC_POINT_bn2point(group, tmp_1, "
+				"NULL, NULL);\n");
+		BIO_printf(out, "\tif (point == NULL)\n\t\tgoto err;\n");
+		BIO_printf(out, "\tif ((tmp_2 = BN_bin2bn(ec_order_%d, "
+				"sizeof(ec_order_%d), tmp_2)) == NULL)"
+				"\n\t\tgoto err;\n", len, len);
+		BIO_printf(out, "\tif ((tmp_3 = BN_bin2bn(ec_cofactor_%d, "
+				"sizeof(ec_cofactor_%d), tmp_3)) == NULL)"
+				"\n\t\tgoto err;\n", len, len);
+		BIO_printf(out, "\tif (!EC_GROUP_set_generator(group, point,"
+				" tmp_2, tmp_3))\n\t\tgoto err;\n");
+		BIO_printf(out, "\n\tok=1;\n");
+		BIO_printf(out, "err:\n");
+		BIO_printf(out, "\tif (tmp_1)\n\t\tBN_free(tmp_1);\n");
+		BIO_printf(out, "\tif (tmp_2)\n\t\tBN_free(tmp_2);\n");
+		BIO_printf(out, "\tif (tmp_3)\n\t\tBN_free(tmp_3);\n");
+		BIO_printf(out, "\tif (point)\n\t\tEC_POINT_free(point);\n");
+		BIO_printf(out, "\tif (!ok)\n");
+		BIO_printf(out, "\t\t{\n");
+		BIO_printf(out, "\t\tEC_GROUP_free(group);\n");
+		BIO_printf(out, "\t\tgroup = NULL;\n");
+		BIO_printf(out, "\t\t}\n");
+		BIO_printf(out, "\treturn(group);\n\t}\n");
+	}
+
+	if (!noout)
+		{
+		if (outformat == FORMAT_ASN1)
+			i = i2d_ECPKParameters_bio(out, group);
+		else if (outformat == FORMAT_PEM)
+			i = PEM_write_bio_ECPKParameters(out, group);
+		else	
+			{
+			BIO_printf(bio_err,"bad output format specified for"
+				" outfile\n");
+			goto end;
+			}
+		if (!i)
+			{
+			BIO_printf(bio_err, "unable to write elliptic "
+				"curve parameters\n");
+			ERR_print_errors(bio_err);
+			goto end;
+			}
+		}
+	
+	if (need_rand)
+		{
+		app_RAND_load_file(NULL, bio_err, (inrand != NULL));
+		if (inrand != NULL)
+			BIO_printf(bio_err,"%ld semi-random bytes loaded\n",
+				app_RAND_load_files(inrand));
+		}
+
+	if (genkey)
+		{
+		EC_KEY *eckey = EC_KEY_new();
+
+		if (eckey == NULL)
+			goto end;
+
+		assert(need_rand);
+
+		if (EC_KEY_set_group(eckey, group) == 0)
+			goto end;
+		
+		if (!EC_KEY_generate_key(eckey))
+			{
+			EC_KEY_free(eckey);
+			goto end;
+			}
+		if (outformat == FORMAT_ASN1)
+			i = i2d_ECPrivateKey_bio(out, eckey);
+		else if (outformat == FORMAT_PEM)
+			i = PEM_write_bio_ECPrivateKey(out, eckey, NULL,
+				NULL, 0, NULL, NULL);
+		else	
+			{
+			BIO_printf(bio_err, "bad output format specified "
+				"for outfile\n");
+			EC_KEY_free(eckey);
+			goto end;
+			}
+		EC_KEY_free(eckey);
+		}
+
+	if (need_rand)
+		app_RAND_write_file(NULL, bio_err);
+
+	ret=0;
+end:
+	if (ec_p)
+		BN_free(ec_p);
+	if (ec_a)
+		BN_free(ec_a);
+	if (ec_b)
+		BN_free(ec_b);
+	if (ec_gen)
+		BN_free(ec_gen);
+	if (ec_order)
+		BN_free(ec_order);
+	if (ec_cofactor)
+		BN_free(ec_cofactor);
+	if (buffer)
+		OPENSSL_free(buffer);
+	if (in != NULL)
+		BIO_free(in);
+	if (out != NULL)
+		BIO_free_all(out);
+	if (group != NULL)
+		EC_GROUP_free(group);
+	apps_shutdown();
+	OPENSSL_EXIT(ret);
+}
+
+static int ecparam_print_var(BIO *out, BIGNUM *in, const char *var,
+	int len, unsigned char *buffer)
+	{
+	BIO_printf(out, "static unsigned char %s_%d[] = {", var, len);
+	if (BN_is_zero(in))
+		BIO_printf(out, "\n\t0x00");
+	else 
+		{
+		int i, l;
+
+		l = BN_bn2bin(in, buffer);
+		for (i=0; i<l-1; i++)
+			{
+			if ((i%12) == 0) 
+				BIO_printf(out, "\n\t");
+			BIO_printf(out, "0x%02X,", buffer[i]);
+			}
+		if ((i%12) == 0) 
+			BIO_printf(out, "\n\t");
+		BIO_printf(out, "0x%02X", buffer[i]);
+		}
+	BIO_printf(out, "\n\t};\n\n");
+	return 1;
+	}
+#endif

apps/enc.c

@@ -114,9 +114,11 @@ int MAIN(int argc, char **argv)
 	unsigned char salt[PKCS5_SALT_LEN];
 	char *str=NULL, *passarg = NULL, *pass = NULL;
 	char *hkey=NULL,*hiv=NULL,*hsalt = NULL;
+	char *md=NULL;
 	int enc=1,printkey=0,i,base64=0;
 	int debug=0,olb64=0,nosalt=0;
 	const EVP_CIPHER *cipher=NULL,*c;
+	EVP_CIPHER_CTX *ctx = NULL;
 	char *inf=NULL,*outf=NULL;
 	BIO *in=NULL,*out=NULL,*b64=NULL,*benc=NULL,*rbio=NULL,*wbio=NULL;
 #define PROG_NAME_SIZE  39
@@ -124,6 +126,8 @@ int MAIN(int argc, char **argv)
 #ifndef OPENSSL_NO_ENGINE
 	char *engine = NULL;
 #endif
+	const EVP_MD *dgst=NULL;
+	int non_fips_allow = 0;
 
 	apps_startup();
 
@@ -253,6 +257,13 @@ int MAIN(int argc, char **argv)
 			if (--argc < 1) goto bad;
 			hiv= *(++argv);
 			}
+		else if (strcmp(*argv,"-md") == 0)
+			{
+			if (--argc < 1) goto bad;
+			md= *(++argv);
+			}
+		else if (strcmp(*argv,"-non-fips-allow") == 0)
+			non_fips_allow = 1;
 		else if	((argv[0][0] == '-') &&
 			((c=EVP_get_cipherbyname(&(argv[0][1]))) != NULL))
 			{
@@ -271,8 +282,10 @@ bad:
 			BIO_printf(bio_err,"%-14s encrypt\n","-e");
 			BIO_printf(bio_err,"%-14s decrypt\n","-d");
 			BIO_printf(bio_err,"%-14s base64 encode/decode, depending on encryption flag\n","-a/-base64");
-			BIO_printf(bio_err,"%-14s key is the next argument\n","-k");
+			BIO_printf(bio_err,"%-14s passphrase is the next argument\n","-k");
-			BIO_printf(bio_err,"%-14s key is the first line of the file argument\n","-kfile");
+			BIO_printf(bio_err,"%-14s passphrase is the first line of the file argument\n","-kfile");
+			BIO_printf(bio_err,"%-14s the next argument is the md to use to create a key\n","-md");
+			BIO_printf(bio_err,"%-14s   from a passphrase.  One of md2, md5, sha or sha1\n","");
 			BIO_printf(bio_err,"%-14s key/iv in hex is the next argument\n","-K/-iv");
 			BIO_printf(bio_err,"%-14s print the iv/key (then exit if -P)\n","-[pP]");
 			BIO_printf(bio_err,"%-14s buffer size\n","-bufsize <n>");
@@ -296,6 +309,20 @@ bad:
         e = setup_engine(bio_err, engine, 0);
 #endif
 
+	if (md && (dgst=EVP_get_digestbyname(md)) == NULL)
+		{
+		BIO_printf(bio_err,"%s is an unsupported message digest type\n",md);
+		goto end;
+		}
+
+	if (dgst == NULL)
+		{
+		if (in_FIPS_mode)
+			dgst = EVP_sha1();
+		else
+			dgst = EVP_md5();
+		}
+
 	if (bufsize != NULL)
 		{
 		unsigned long n;
@@ -319,7 +346,7 @@ bad:
 			}
 
 		/* It must be large enough for a base64 encoded line */
-		if (n < 80) n=80;
+		if (base64 && n < 80) n=80;
 
 		bsize=(int)n;
 		if (verbose) BIO_printf(bio_err,"bufsize=%d\n",bsize);
@@ -344,12 +371,16 @@ bad:
 		{
 		BIO_set_callback(in,BIO_debug_callback);
 		BIO_set_callback(out,BIO_debug_callback);
-		BIO_set_callback_arg(in,bio_err);
+		BIO_set_callback_arg(in,(char *)bio_err);
-		BIO_set_callback_arg(out,bio_err);
+		BIO_set_callback_arg(out,(char *)bio_err);
 		}
 
 	if (inf == NULL)
+	        {
+		if (bufsize != NULL)
+			setvbuf(stdin, (char *)NULL, _IONBF, 0);
 		BIO_set_fp(in,stdin,BIO_NOCLOSE);
+	        }
 	else
 		{
 		if (BIO_read_filename(in,inf) <= 0)
@@ -373,7 +404,7 @@ bad:
 			{
 			char buf[200];
 
-			sprintf(buf,"enter %s %s password:",
+			BIO_snprintf(buf,sizeof buf,"enter %s %s password:",
 				     OBJ_nid2ln(EVP_CIPHER_nid(cipher)),
 				     (enc)?"encryption":"decryption");
 			strbuf[0]='\0';
@@ -400,6 +431,8 @@ bad:
 	if (outf == NULL)
 		{
 		BIO_set_fp(out,stdout,BIO_NOCLOSE);
+		if (bufsize != NULL)
+			setvbuf(stdout, (char *)NULL, _IONBF, 0);
 #ifdef OPENSSL_SYS_VMS
 		{
 		BIO *tmpbio = BIO_new(BIO_f_linebuffer());
@@ -426,7 +459,7 @@ bad:
 		if (debug)
 			{
 			BIO_set_callback(b64,BIO_debug_callback);
-			BIO_set_callback_arg(b64,bio_err);
+			BIO_set_callback_arg(b64,(char *)bio_err);
 			}
 		if (olb64)
 			BIO_set_flags(b64,BIO_FLAGS_BASE64_NO_NL);
@@ -483,7 +516,7 @@ bad:
 				sptr = salt;
 			}
 
-			EVP_BytesToKey(cipher,EVP_md5(),sptr,
+			EVP_BytesToKey(cipher,dgst,sptr,
 				(unsigned char *)str,
 				strlen(str),1,key,iv);
 			/* zero the complete buffer or the string
@@ -516,17 +549,40 @@ bad:
 
 		if ((benc=BIO_new(BIO_f_cipher())) == NULL)
 			goto end;
-		BIO_set_cipher(benc,cipher,key,iv,enc);
+
-		if (nopad)
+		/* Since we may be changing parameters work on the encryption
-			{
+		 * context rather than calling BIO_set_cipher().
-			EVP_CIPHER_CTX *ctx;
+		 */
+
 		BIO_get_cipher_ctx(benc, &ctx);
-			EVP_CIPHER_CTX_set_padding(ctx, 0);
+
+		if (non_fips_allow)
+			EVP_CIPHER_CTX_set_flags(ctx,
+				EVP_CIPH_FLAG_NON_FIPS_ALLOW);
+
+		if (!EVP_CipherInit_ex(ctx, cipher, NULL, NULL, NULL, enc))
+			{
+			BIO_printf(bio_err, "Error setting cipher %s\n",
+				EVP_CIPHER_name(cipher));
+			ERR_print_errors(bio_err);
+			goto end;
 			}
+
+		if (nopad)
+			EVP_CIPHER_CTX_set_padding(ctx, 0);
+
+		if (!EVP_CipherInit_ex(ctx, NULL, NULL, key, iv, enc))
+			{
+			BIO_printf(bio_err, "Error setting cipher %s\n",
+				EVP_CIPHER_name(cipher));
+			ERR_print_errors(bio_err);
+			goto end;
+			}
+
 		if (debug)
 			{
 			BIO_set_callback(benc,BIO_debug_callback);
-			BIO_set_callback_arg(benc,bio_err);
+			BIO_set_callback_arg(benc,(char *)bio_err);
 			}
 
 		if (printkey)
@@ -534,7 +590,7 @@ bad:
 			if (!nosalt)
 				{
 				printf("salt=");
-				for (i=0; i<sizeof salt; i++)
+				for (i=0; i<(int)sizeof(salt); i++)
 					printf("%02X",salt[i]);
 				printf("\n");
 				}

apps/engine.c

@@ -72,14 +72,15 @@
 #undef PROG
 #define PROG	engine_main
 
-static char *engine_usage[]={
+static const char *engine_usage[]={
 "usage: engine opts [engine ...]\n",
 " -v[v[v[v]]] - verbose mode, for each engine, list its 'control commands'\n",
 "               -vv will additionally display each command's description\n",
 "               -vvv will also add the input flags for each command\n",
 "               -vvvv will also show internal input flags\n",
 " -c          - for each engine, also list the capabilities\n",
-" -t          - for each engine, check that they are really available\n",
+" -t[t]       - for each engine, check that they are really available\n",
+"               -tt will display error trace for unavailable engines\n",
 " -pre <cmd>  - runs command 'cmd' against the ENGINE before any attempts\n",
 "               to load it (if -t is used)\n",
 " -post <cmd> - runs command 'cmd' against the ENGINE after loading it\n",
@@ -122,8 +123,8 @@ static int append_buf(char **buf, const char *s, int *size, int step)
 		return 0;
 
 	if (**buf != '\0')
-		strcat(*buf, ", ");
+		BUF_strlcat(*buf, ", ", *size);
-	strcat(*buf, s);
+	BUF_strlcat(*buf, s, *size);
 
 	return 1;
 	}
@@ -343,8 +344,8 @@ int MAIN(int, char **);
 int MAIN(int argc, char **argv)
 	{
 	int ret=1,i;
-	char **pp;
+	const char **pp;
-	int verbose=0, list_cap=0, test_avail=0;
+	int verbose=0, list_cap=0, test_avail=0, test_avail_noise = 0;
 	ENGINE *e;
 	STACK *engines = sk_new_null();
 	STACK *pre_cmds = sk_new_null();
@@ -382,16 +383,26 @@ int MAIN(int argc, char **argv)
 			}
 		else if (strcmp(*argv,"-c") == 0)
 			list_cap=1;
-		else if (strcmp(*argv,"-t") == 0)
+		else if (strncmp(*argv,"-t",2) == 0)
+			{
 			test_avail=1;
+			if(strspn(*argv + 1, "t") < strlen(*argv + 1))
+				goto skip_arg_loop;
+			if((test_avail_noise = strlen(*argv + 1) - 1) > 1)
+				goto skip_arg_loop;
+			}
 		else if (strcmp(*argv,"-pre") == 0)
 			{
 			argc--; argv++;
+			if (argc == 0)
+				goto skip_arg_loop;
 			sk_push(pre_cmds,*argv);
 			}
 		else if (strcmp(*argv,"-post") == 0)
 			{
 			argc--; argv++;
+			if (argc == 0)
+				goto skip_arg_loop;
 			sk_push(post_cmds,*argv);
 			}
 		else if ((strncmp(*argv,"-h",2) == 0) ||
@@ -498,6 +509,7 @@ skip_digests:
 				else
 					{
 					BIO_printf(bio_out, "[ unavailable ]\n");
+					if(test_avail_noise)
 						ERR_print_errors_fp(stdout);
 					ERR_clear_error();
 					}
@@ -512,6 +524,7 @@ skip_digests:
 
 	ret=0;
 end:
+
 	ERR_print_errors(bio_err);
 	sk_pop_free(engines, identity);
 	sk_pop_free(pre_cmds, identity);
@@ -520,4 +533,10 @@ end:
 	apps_shutdown();
 	OPENSSL_EXIT(ret);
 	}
+#else
+
+# if PEDANTIC
+static void *dummy=&dummy;
+# endif
+
 #endif

apps/gendh.c

@@ -57,6 +57,13 @@
  * [including the GNU Public Licence.]
  */
 
+#include <openssl/opensslconf.h>
+/* Until the key-gen callbacks are modified to use newer prototypes, we allow
+ * deprecated functions for openssl-internal code */
+#ifdef OPENSSL_NO_DEPRECATED
+#undef OPENSSL_NO_DEPRECATED
+#endif
+
 #ifndef OPENSSL_NO_DH
 #include <stdio.h>
 #include <string.h>
@@ -75,12 +82,13 @@
 #undef PROG
 #define PROG gendh_main
 
-static void MS_CALLBACK dh_cb(int p, int n, void *arg);
+static int MS_CALLBACK dh_cb(int p, int n, BN_GENCB *cb);
 
 int MAIN(int, char **);
 
 int MAIN(int argc, char **argv)
 	{
+	BN_GENCB cb;
 #ifndef OPENSSL_NO_ENGINE
 	ENGINE *e = NULL;
 #endif
@@ -96,6 +104,7 @@ int MAIN(int argc, char **argv)
 
 	apps_startup();
 
+	BN_GENCB_set(&cb, dh_cb, bio_err);
 	if (bio_err == NULL)
 		if ((bio_err=BIO_new(BIO_s_file())) != NULL)
 			BIO_set_fp(bio_err,stderr,BIO_NOCLOSE|BIO_FP_TEXT);
@@ -193,9 +202,9 @@ bad:
 
 	BIO_printf(bio_err,"Generating DH parameters, %d bit long safe prime, generator %d\n",num,g);
 	BIO_printf(bio_err,"This is going to take a long time\n");
-	dh=DH_generate_parameters(num,g,dh_cb,bio_err);
 
-	if (dh == NULL) goto end;
+	if(((dh = DH_new()) == NULL) || !DH_generate_parameters_ex(dh, num, g, &cb))
+		goto end;
 		
 	app_RAND_write_file(NULL, bio_err);
 
@@ -211,7 +220,7 @@ end:
 	OPENSSL_EXIT(ret);
 	}
 
-static void MS_CALLBACK dh_cb(int p, int n, void *arg)
+static int MS_CALLBACK dh_cb(int p, int n, BN_GENCB *cb)
 	{
 	char c='*';
 
@@ -219,10 +228,11 @@ static void MS_CALLBACK dh_cb(int p, int n, void *arg)
 	if (p == 1) c='+';
 	if (p == 2) c='*';
 	if (p == 3) c='\n';
-	BIO_write((BIO *)arg,&c,1);
+	BIO_write(cb->arg,&c,1);
-	(void)BIO_flush((BIO *)arg);
+	(void)BIO_flush(cb->arg);
 #ifdef LINT
 	p=n;
 #endif
+	return 1;
 	}
 #endif

apps/gendsa.c

@@ -56,6 +56,7 @@
  * [including the GNU Public Licence.]
  */
 
+#include <openssl/opensslconf.h>	/* for OPENSSL_NO_DSA */
 #ifndef OPENSSL_NO_DSA
 #include <stdio.h>
 #include <string.h>
@@ -139,6 +140,10 @@ int MAIN(int argc, char **argv)
 		else if (strcmp(*argv,"-idea") == 0)
 			enc=EVP_idea_cbc();
 #endif
+#ifndef OPENSSL_NO_SEED
+		else if (strcmp(*argv,"-seed") == 0)
+			enc=EVP_seed_cbc();
+#endif
 #ifndef OPENSSL_NO_AES
 		else if (strcmp(*argv,"-aes128") == 0)
 			enc=EVP_aes_128_cbc();
@@ -146,6 +151,14 @@ int MAIN(int argc, char **argv)
 			enc=EVP_aes_192_cbc();
 		else if (strcmp(*argv,"-aes256") == 0)
 			enc=EVP_aes_256_cbc();
+#endif
+#ifndef OPENSSL_NO_CAMELLIA
+		else if (strcmp(*argv,"-camellia128") == 0)
+			enc=EVP_camellia_128_cbc();
+		else if (strcmp(*argv,"-camellia192") == 0)
+			enc=EVP_camellia_192_cbc();
+		else if (strcmp(*argv,"-camellia256") == 0)
+			enc=EVP_camellia_256_cbc();
 #endif
 		else if (**argv != '-' && dsaparams == NULL)
 			{
@@ -169,10 +182,18 @@ bad:
 #ifndef OPENSSL_NO_IDEA
 		BIO_printf(bio_err," -idea     - encrypt the generated key with IDEA in cbc mode\n");
 #endif
+#ifndef OPENSSL_NO_SEED
+		BIO_printf(bio_err," -seed\n");
+		BIO_printf(bio_err,"                 encrypt PEM output with cbc seed\n");
+#endif
 #ifndef OPENSSL_NO_AES
 		BIO_printf(bio_err," -aes128, -aes192, -aes256\n");
 		BIO_printf(bio_err,"                 encrypt PEM output with cbc aes\n");
 #endif
+#ifndef OPENSSL_NO_CAMELLIA
+		BIO_printf(bio_err," -camellia128, -camellia192, -camellia256\n");
+		BIO_printf(bio_err,"                 encrypt PEM output with cbc camellia\n");
+#endif
 #ifndef OPENSSL_NO_ENGINE
 		BIO_printf(bio_err," -engine e - use engine e, possibly a hardware device.\n");
 #endif

apps/genrsa.c

@@ -56,6 +56,13 @@
  * [including the GNU Public Licence.]
  */
 
+#include <openssl/opensslconf.h>
+/* Until the key-gen callbacks are modified to use newer prototypes, we allow
+ * deprecated functions for openssl-internal code */
+#ifdef OPENSSL_NO_DEPRECATED
+#undef OPENSSL_NO_DEPRECATED
+#endif
+
 #ifndef OPENSSL_NO_RSA
 #include <stdio.h>
 #include <string.h>
@@ -75,19 +82,20 @@
 #undef PROG
 #define PROG genrsa_main
 
-static void MS_CALLBACK genrsa_cb(int p, int n, void *arg);
+static int MS_CALLBACK genrsa_cb(int p, int n, BN_GENCB *cb);
 
 int MAIN(int, char **);
 
 int MAIN(int argc, char **argv)
 	{
+	BN_GENCB cb;
 #ifndef OPENSSL_NO_ENGINE
 	ENGINE *e = NULL;
 #endif
 	int ret=1;
-	RSA *rsa=NULL;
 	int i,num=DEFBITS;
 	long l;
+	int use_x931 = 0;
 	const EVP_CIPHER *enc=NULL;
 	unsigned long f4=RSA_F4;
 	char *outfile=NULL;
@@ -97,8 +105,13 @@ int MAIN(int argc, char **argv)
 #endif
 	char *inrand=NULL;
 	BIO *out=NULL;
+	BIGNUM *bn = BN_new();
+	RSA *rsa = RSA_new();
+
+	if(!bn || !rsa) goto err;
 
 	apps_startup();
+	BN_GENCB_set(&cb, genrsa_cb, bio_err);
 
 	if (bio_err == NULL)
 		if ((bio_err=BIO_new(BIO_s_file())) != NULL)
@@ -126,6 +139,8 @@ int MAIN(int argc, char **argv)
 			f4=3;
 		else if (strcmp(*argv,"-F4") == 0 || strcmp(*argv,"-f4") == 0)
 			f4=RSA_F4;
+		else if (strcmp(*argv,"-x931") == 0)
+			use_x931 = 1;
 #ifndef OPENSSL_NO_ENGINE
 		else if (strcmp(*argv,"-engine") == 0)
 			{
@@ -148,6 +163,10 @@ int MAIN(int argc, char **argv)
 		else if (strcmp(*argv,"-idea") == 0)
 			enc=EVP_idea_cbc();
 #endif
+#ifndef OPENSSL_NO_SEED
+		else if (strcmp(*argv,"-seed") == 0)
+			enc=EVP_seed_cbc();
+#endif
 #ifndef OPENSSL_NO_AES
 		else if (strcmp(*argv,"-aes128") == 0)
 			enc=EVP_aes_128_cbc();
@@ -155,6 +174,14 @@ int MAIN(int argc, char **argv)
 			enc=EVP_aes_192_cbc();
 		else if (strcmp(*argv,"-aes256") == 0)
 			enc=EVP_aes_256_cbc();
+#endif
+#ifndef OPENSSL_NO_CAMELLIA
+		else if (strcmp(*argv,"-camellia128") == 0)
+			enc=EVP_camellia_128_cbc();
+		else if (strcmp(*argv,"-camellia192") == 0)
+			enc=EVP_camellia_192_cbc();
+		else if (strcmp(*argv,"-camellia256") == 0)
+			enc=EVP_camellia_256_cbc();
 #endif
 		else if (strcmp(*argv,"-passout") == 0)
 			{
@@ -175,9 +202,17 @@ bad:
 #ifndef OPENSSL_NO_IDEA
 		BIO_printf(bio_err," -idea           encrypt the generated key with IDEA in cbc mode\n");
 #endif
+#ifndef OPENSSL_NO_SEED
+		BIO_printf(bio_err," -seed\n");
+		BIO_printf(bio_err,"                 encrypt PEM output with cbc seed\n");
+#endif
 #ifndef OPENSSL_NO_AES
 		BIO_printf(bio_err," -aes128, -aes192, -aes256\n");
 		BIO_printf(bio_err,"                 encrypt PEM output with cbc aes\n");
+#endif
+#ifndef OPENSSL_NO_CAMELLIA
+		BIO_printf(bio_err," -camellia128, -camellia192, -camellia256\n");
+		BIO_printf(bio_err,"                 encrypt PEM output with cbc camellia\n");
 #endif
 		BIO_printf(bio_err," -out file       output the key to 'file\n");
 		BIO_printf(bio_err," -passout arg    output file pass phrase source\n");
@@ -233,12 +268,22 @@ bad:
 
 	BIO_printf(bio_err,"Generating RSA private key, %d bit long modulus\n",
 		num);
-	rsa=RSA_generate_key(num,f4,genrsa_cb,bio_err);
+
+	if (use_x931)
+		{
+		BIGNUM *pubexp;
+		pubexp = BN_new();
+		if (!BN_set_word(pubexp, f4))
+			goto err;
+		if (!RSA_X931_generate_key_ex(rsa, num, pubexp, &cb))
+			goto err;
+		BN_free(pubexp);
+		}
+	else if(!BN_set_word(bn, f4) || !RSA_generate_key_ex(rsa, num, bn, &cb))
+		goto err;
 		
 	app_RAND_write_file(NULL, bio_err);
 
-	if (rsa == NULL) goto err;
-	
 	/* We need to do the following for when the base number size is <
 	 * long, esp windows 3.1 :-(. */
 	l=0L;
@@ -262,8 +307,9 @@ bad:
 
 	ret=0;
 err:
-	if (rsa != NULL) RSA_free(rsa);
+	if (bn) BN_free(bn);
-	if (out != NULL) BIO_free_all(out);
+	if (rsa) RSA_free(rsa);
+	if (out) BIO_free_all(out);
 	if(passout) OPENSSL_free(passout);
 	if (ret != 0)
 		ERR_print_errors(bio_err);
@@ -271,7 +317,7 @@ err:
 	OPENSSL_EXIT(ret);
 	}
 
-static void MS_CALLBACK genrsa_cb(int p, int n, void *arg)
+static int MS_CALLBACK genrsa_cb(int p, int n, BN_GENCB *cb)
 	{
 	char c='*';
 
@@ -279,11 +325,12 @@ static void MS_CALLBACK genrsa_cb(int p, int n, void *arg)
 	if (p == 1) c='+';
 	if (p == 2) c='*';
 	if (p == 3) c='\n';
-	BIO_write((BIO *)arg,&c,1);
+	BIO_write(cb->arg,&c,1);
-	(void)BIO_flush((BIO *)arg);
+	(void)BIO_flush(cb->arg);
 #ifdef LINT
 	p=n;
 #endif
+	return 1;
 	}
 #else /* !OPENSSL_NO_RSA */
 

apps/makeapps.com

@@ -139,30 +139,13 @@ $! Define The Application Files.
 $!
 $ LIB_FILES = "VERIFY;ASN1PARS;REQ;DGST;DH;DHPARAM;ENC;PASSWD;GENDH;ERRSTR;"+-
 	      "CA;PKCS7;CRL2P7;CRL;"+-
-	      "RSA;RSAUTL;DSA;DSAPARAM;"+-
+	      "RSA;RSAUTL;DSA;DSAPARAM;EC;ECPARAM;"+-
 	      "X509;GENRSA;GENDSA;S_SERVER;S_CLIENT;SPEED;"+-
 	      "S_TIME;APPS;S_CB;S_SOCKET;APP_RAND;VERSION;SESS_ID;"+-
-	      "CIPHERS;NSEQ;PKCS12;PKCS8;SPKAC;SMIME;RAND;ENGINE;OCSP"
+	      "CIPHERS;NSEQ;PKCS12;PKCS8;SPKAC;SMIME;RAND;ENGINE;OCSP;PRIME"
-$ APP_FILES := OPENSSL,'OBJ_DIR'VERIFY.OBJ,ASN1PARS.OBJ,REQ.OBJ,DGST.OBJ,DH.OBJ,DHPARAM.OBJ,ENC.OBJ,PASSWD.OBJ,GENDH.OBJ,ERRSTR.OBJ,-
-	       CA.OBJ,PKCS7.OBJ,CRL2P7.OBJ,CRL.OBJ,-
-	       RSA.OBJ,RSAUTL.OBJ,DSA.OBJ,DSAPARAM.OBJ,-
-	       X509.OBJ,GENRSA.OBJ,GENDSA.OBJ,S_SERVER.OBJ,S_CLIENT.OBJ,SPEED.OBJ,-
-	       S_TIME.OBJ,APPS.OBJ,S_CB.OBJ,S_SOCKET.OBJ,APP_RAND.OBJ,VERSION.OBJ,SESS_ID.OBJ,-
-	       CIPHERS.OBJ,NSEQ.OBJ,PKCS12.OBJ,PKCS8.OBJ,SPKAC.OBJ,SMIME.OBJ,RAND.OBJ,ENGINE.OBJ,OCSP.OBJ
 $ TCPIP_PROGRAMS = ",,"
 $ IF COMPILER .EQS. "VAXC" THEN -
      TCPIP_PROGRAMS = ",OPENSSL,"
-$!$ APP_FILES := VERIFY;ASN1PARS;REQ;DGST;DH;ENC;GENDH;ERRSTR;CA;-
-$!	       PKCS7;CRL2P7;CRL;-
-$!	       RSA;DSA;DSAPARAM;-
-$!	       X509;GENRSA;GENDSA;-
-$!	       S_SERVER,'OBJ_DIR'S_SOCKET.OBJ,'OBJ_DIR'S_CB.OBJ;-
-$!	       S_CLIENT,'OBJ_DIR'S_SOCKET.OBJ,'OBJ_DIR'S_CB.OBJ;-
-$!	       SPEED;-
-$!	       S_TIME,'OBJ_DIR'S_CB.OBJ;VERSION;SESS_ID;CIPHERS;NSEQ
-$!$ TCPIP_PROGRAMS = ",,"
-$!$ IF COMPILER .EQS. "VAXC" THEN -
-$!     TCPIP_PROGRAMS = ",S_SERVER,S_CLIENT,SESS_ID,CIPHERS,S_TIME,"
 $!
 $! Setup exceptional compilations
 $!
@@ -650,7 +633,7 @@ $ CCDEFS = "MONOLITH"
 $ IF F$TYPE(USER_CCDEFS) .NES. "" THEN CCDEFS = CCDEFS + "," + USER_CCDEFS
 $ CCEXTRAFLAGS = ""
 $ IF F$TYPE(USER_CCFLAGS) .NES. "" THEN CCEXTRAFLAGS = USER_CCFLAGS
-$ CCDISABLEWARNINGS = "LONGLONGTYPE,LONGLONGSUFX"
+$ CCDISABLEWARNINGS = "LONGLONGTYPE,LONGLONGSUFX,FOUNDCR"
 $ IF F$TYPE(USER_CCDISABLEWARNINGS) .NES. "" THEN -
 	CCDISABLEWARNINGS = CCDISABLEWARNINGS + "," + USER_CCDISABLEWARNINGS
 $!
@@ -679,7 +662,7 @@ $     IF ARCH.EQS."VAX" .AND. F$TRNLNM("DECC$CC_DEFAULT").NES."/DECC" -
 	 THEN CC = "CC/DECC"
 $     CC = CC + "/''CC_OPTIMIZE'/''DEBUGGER'/STANDARD=ANSI89" + -
            "/NOLIST/PREFIX=ALL" + -
-	   "/INCLUDE=(SYS$DISK:[-])" + CCEXTRAFLAGS
+	   "/INCLUDE=(SYS$DISK:[-],SYS$DISK:[-.CRYPTO])" + CCEXTRAFLAGS
 $!
 $!    Define The Linker Options File Name.
 $!
@@ -711,7 +694,7 @@ $	EXIT
 $     ENDIF
 $     IF F$TRNLNM("DECC$CC_DEFAULT").EQS."/DECC" THEN CC = "CC/VAXC"
 $     CC = CC + "/''CC_OPTIMIZE'/''DEBUGGER'/NOLIST" + -
-	   "/INCLUDE=(SYS$DISK:[-])" + CCEXTRAFLAGS
+	   "/INCLUDE=(SYS$DISK:[-],SYS$DISK:[-.CRYPTO])" + CCEXTRAFLAGS
 $     CCDEFS = CCDEFS + ",""VAXC"""
 $!
 $!    Define <sys> As SYS$COMMON:[SYSLIB]
@@ -743,7 +726,7 @@ $!    Use GNU C...
 $!
 $     IF F$TYPE(GCC) .EQS. "" THEN GCC := GCC
 $     CC = GCC+"/NOCASE_HACK/''GCC_OPTIMIZE'/''DEBUGGER'/NOLIST" + -
-	   "/INCLUDE=(SYS$DISK:[-])" + CCEXTRAFLAGS
+	   "/INCLUDE=(SYS$DISK:[-],SYS$DISK:[-.CRYPTO])" + CCEXTRAFLAGS
 $!
 $!    Define The Linker Options File Name.
 $!

apps/ocsp.c

@@ -56,31 +56,18 @@
  *
  */
 #ifndef OPENSSL_NO_OCSP
-
+#define USE_SOCKETS
 #include <stdio.h>
+#include <stdlib.h>
 #include <string.h>
-#include "apps.h"
+#include "apps.h" /* needs to be included before the openssl headers! */
-#include <openssl/pem.h>
+#include <openssl/e_os2.h>
-#include <openssl/ocsp.h>
-#include <openssl/err.h>
 #include <openssl/ssl.h>
+#include <openssl/err.h>
 
 /* Maximum leeway in validity period: default 5 minutes */
 #define MAX_VALIDITY_PERIOD	(5 * 60)
 
-/* CA index.txt definitions */
-#define DB_type         0
-#define DB_exp_date     1
-#define DB_rev_date     2
-#define DB_serial       3       /* index - unique */
-#define DB_file         4       
-#define DB_name         5       /* index - unique for active */
-#define DB_NUMBER       6
-
-#define DB_TYPE_REV	'R'
-#define DB_TYPE_EXP	'E'
-#define DB_TYPE_VAL	'V'
-
 static int add_ocsp_cert(OCSP_REQUEST **req, X509 *cert, X509 *issuer,
 				STACK_OF(OCSP_CERTID) *ids);
 static int add_ocsp_serial(OCSP_REQUEST **req, char *serial, X509 *issuer,
@@ -89,15 +76,17 @@ static int print_ocsp_summary(BIO *out, OCSP_BASICRESP *bs, OCSP_REQUEST *req,
 				STACK *names, STACK_OF(OCSP_CERTID) *ids,
 				long nsec, long maxage);
 
-static int make_ocsp_response(OCSP_RESPONSE **resp, OCSP_REQUEST *req, TXT_DB *db,
+static int make_ocsp_response(OCSP_RESPONSE **resp, OCSP_REQUEST *req, CA_DB *db,
 			X509 *ca, X509 *rcert, EVP_PKEY *rkey,
 			STACK_OF(X509) *rother, unsigned long flags,
 			int nmin, int ndays);
 
-static char **lookup_serial(TXT_DB *db, ASN1_INTEGER *ser);
+static char **lookup_serial(CA_DB *db, ASN1_INTEGER *ser);
 static BIO *init_responder(char *port);
 static int do_responder(OCSP_REQUEST **preq, BIO **pcbio, BIO *acbio, char *port);
 static int send_ocsp_response(BIO *cbio, OCSP_RESPONSE *resp);
+static OCSP_RESPONSE *query_responder(BIO *err, BIO *cbio, char *path,
+				OCSP_REQUEST *req, int req_timeout);
 
 #undef PROG
 #define PROG ocsp_main
@@ -124,11 +113,11 @@ int MAIN(int argc, char **argv)
 	BIO *acbio = NULL, *cbio = NULL;
 	BIO *derbio = NULL;
 	BIO *out = NULL;
+	int req_timeout = -1;
 	int req_text = 0, resp_text = 0;
 	long nsec = MAX_VALIDITY_PERIOD, maxage = -1;
 	char *CAfile = NULL, *CApath = NULL;
 	X509_STORE *store = NULL;
-	SSL_CTX *ctx = NULL;
 	STACK_OF(X509) *sign_other = NULL, *verify_other = NULL, *rother = NULL;
 	char *sign_certfile = NULL, *verify_certfile = NULL, *rcertfile = NULL;
 	unsigned long sign_flags = 0, verify_flags = 0, rflags = 0;
@@ -136,13 +125,14 @@ int MAIN(int argc, char **argv)
 	int accept_count = -1;
 	int badarg = 0;
 	int i;
+	int ignore_err = 0;
 	STACK *reqnames = NULL;
 	STACK_OF(OCSP_CERTID) *ids = NULL;
 
 	X509 *rca_cert = NULL;
 	char *ridx_filename = NULL;
 	char *rca_filename = NULL;
-	TXT_DB *rdb = NULL;
+	CA_DB *rdb = NULL;
 	int nmin = 0, ndays = -1;
 
 	if (bio_err == NULL) bio_err = BIO_new_fp(stderr, BIO_NOCLOSE);
@@ -150,6 +140,7 @@ int MAIN(int argc, char **argv)
 	if (!load_config(bio_err, NULL))
 		goto end;
 	SSL_load_error_strings();
+	OpenSSL_add_ssl_algorithms();
 	args = argv + 1;
 	reqnames = sk_new_null();
 	ids = sk_OCSP_CERTID_new_null();
@@ -164,6 +155,22 @@ int MAIN(int argc, char **argv)
 				}
 			else badarg = 1;
 			}
+		else if (!strcmp(*args, "-timeout"))
+			{
+			if (args[1])
+				{
+				args++;
+				req_timeout = atol(*args);
+				if (req_timeout < 0)
+					{
+					BIO_printf(bio_err,
+						"Illegal timeout value %s\n",
+						*args);
+					badarg = 1;
+					}
+				}
+			else badarg = 1;
+			}
 		else if (!strcmp(*args, "-url"))
 			{
 			if (args[1])
@@ -195,6 +202,8 @@ int MAIN(int argc, char **argv)
 				}
 			else badarg = 1;
 			}
+		else if (!strcmp(*args, "-ignore_err"))
+			ignore_err = 1;
 		else if (!strcmp(*args, "-noverify"))
 			noverify = 1;
 		else if (!strcmp(*args, "-nonce"))
@@ -524,7 +533,7 @@ int MAIN(int argc, char **argv)
 		BIO_printf (bio_err, "-serial n          serial number to check\n");
 		BIO_printf (bio_err, "-signer file       certificate to sign OCSP request with\n");
 		BIO_printf (bio_err, "-signkey file      private key to sign OCSP request with\n");
-		BIO_printf (bio_err, "-sign_certs file   additional certificates to include in signed request\n");
+		BIO_printf (bio_err, "-sign_other file   additional certificates to include in signed request\n");
 		BIO_printf (bio_err, "-no_certs          don't include any certificates in signed request\n");
 		BIO_printf (bio_err, "-req_text          print text form of request\n");
 		BIO_printf (bio_err, "-resp_text         print text form of response\n");
@@ -544,10 +553,10 @@ int MAIN(int argc, char **argv)
 		BIO_printf (bio_err, "-validity_period n maximum validity discrepancy in seconds\n");
 		BIO_printf (bio_err, "-status_age n      maximum status age in seconds\n");
 		BIO_printf (bio_err, "-noverify          don't verify response at all\n");
-		BIO_printf (bio_err, "-verify_certs file additional certificates to search for signer\n");
+		BIO_printf (bio_err, "-verify_other file additional certificates to search for signer\n");
 		BIO_printf (bio_err, "-trust_other       don't verify additional certificates\n");
 		BIO_printf (bio_err, "-no_intern         don't search certificates contained in response for signer\n");
-		BIO_printf (bio_err, "-no_sig_verify     don't check signature on response\n");
+		BIO_printf (bio_err, "-no_signature_verify don't check signature on response\n");
 		BIO_printf (bio_err, "-no_cert_verify    don't check signing certificate\n");
 		BIO_printf (bio_err, "-no_chain          don't chain verify response\n");
 		BIO_printf (bio_err, "-no_cert_checks    don't do additional checks on signing certificate\n");
@@ -697,22 +706,9 @@ int MAIN(int argc, char **argv)
 
 	if (ridx_filename && !rdb)
 		{
-		BIO *db_bio = NULL;
+		rdb = load_index(ridx_filename, NULL);
-		db_bio = BIO_new_file(ridx_filename, "r");
+		if (!rdb) goto end;
-		if (!db_bio)
+		if (!index_index(rdb)) goto end;
-			{
-			BIO_printf(bio_err, "Error opening index file %s\n", ridx_filename);
-			goto end;
-			}
-		rdb = TXT_DB_read(db_bio, DB_NUMBER);
-		BIO_free(db_bio);
-		if (!rdb)
-			{
-			BIO_printf(bio_err, "Error reading index file %s\n", ridx_filename);
-			goto end;
-			}
-		if (!make_serial_index(rdb))
-			goto end;
 		}
 
 	if (rdb)
@@ -724,47 +720,14 @@ int MAIN(int argc, char **argv)
 	else if (host)
 		{
 #ifndef OPENSSL_NO_SOCK
-		cbio = BIO_new_connect(host);
+		resp = process_responder(bio_err, req, host, path,
+						port, use_ssl, req_timeout);
+		if (!resp)
+			goto end;
 #else
 		BIO_printf(bio_err, "Error creating connect BIO - sockets not supported.\n");
 		goto end;
 #endif
-		if (!cbio)
-			{
-			BIO_printf(bio_err, "Error creating connect BIO\n");
-			goto end;
-			}
-		if (port) BIO_set_conn_port(cbio, port);
-		if (use_ssl == 1)
-			{
-			BIO *sbio;
-#if !defined(OPENSSL_NO_SSL2) && !defined(OPENSSL_NO_SSL3)
-			ctx = SSL_CTX_new(SSLv23_client_method());
-#elif !defined(OPENSSL_NO_SSL3)
-			ctx = SSL_CTX_new(SSLv3_client_method());
-#elif !defined(OPENSSL_NO_SSL2)
-			ctx = SSL_CTX_new(SSLv2_client_method());
-#else
-			BIO_printf(bio_err, "SSL is disabled\n");
-			goto end;
-#endif
-			SSL_CTX_set_mode(ctx, SSL_MODE_AUTO_RETRY);
-			sbio = BIO_new_ssl(ctx, 1);
-			cbio = BIO_push(sbio, cbio);
-			}
-		if (BIO_do_connect(cbio) <= 0)
-			{
-			BIO_printf(bio_err, "Error connecting BIO\n");
-			goto end;
-			}
-		resp = OCSP_sendreq_bio(cbio, path, req);
-		BIO_free_all(cbio);
-		cbio = NULL;
-		if (!resp)
-			{
-			BIO_printf(bio_err, "Error querying OCSP responsder\n");
-			goto end;
-			}
 		}
 	else if (respin)
 		{
@@ -807,8 +770,10 @@ int MAIN(int argc, char **argv)
 
 	if (i != OCSP_RESPONSE_STATUS_SUCCESSFUL)
 		{
-		BIO_printf(out, "Responder Error: %s (%ld)\n",
+		BIO_printf(out, "Responder Error: %s (%d)\n",
 				OCSP_response_status_str(i), i);
+		if (ignore_err)
+			goto redo_accept;
 		ret = 0;
 		goto end;
 		}
@@ -871,7 +836,7 @@ int MAIN(int argc, char **argv)
 
 		if(i <= 0)
 			{
-			BIO_printf(bio_err, "Response Verify Failure\n", i);
+			BIO_printf(bio_err, "Response Verify Failure\n");
 			ERR_print_errors(bio_err);
 			}
 		else
@@ -894,7 +859,7 @@ end:
 	X509_free(cert);
 	X509_free(rsigner);
 	X509_free(rca_cert);
-	TXT_DB_free(rdb);
+	free_index(rdb);
 	BIO_free_all(cbio);
 	BIO_free_all(acbio);
 	BIO_free(out);
@@ -911,7 +876,6 @@ end:
 		OPENSSL_free(host);
 		OPENSSL_free(port);
 		OPENSSL_free(path);
-		SSL_CTX_free(ctx);
 		}
 
 	OPENSSL_EXIT(ret);
@@ -1036,7 +1000,7 @@ static int print_ocsp_summary(BIO *out, OCSP_BASICRESP *bs, OCSP_REQUEST *req,
 	}
 
 
-static int make_ocsp_response(OCSP_RESPONSE **resp, OCSP_REQUEST *req, TXT_DB *db,
+static int make_ocsp_response(OCSP_RESPONSE **resp, OCSP_REQUEST *req, CA_DB *db,
 			X509 *ca, X509 *rcert, EVP_PKEY *rkey,
 			STACK_OF(X509) *rother, unsigned long flags,
 			int nmin, int ndays)
@@ -1128,20 +1092,21 @@ static int make_ocsp_response(OCSP_RESPONSE **resp, OCSP_REQUEST *req, TXT_DB *d
 
 	}
 
-static char **lookup_serial(TXT_DB *db, ASN1_INTEGER *ser)
+static char **lookup_serial(CA_DB *db, ASN1_INTEGER *ser)
 	{
 	int i;
 	BIGNUM *bn = NULL;
 	char *itmp, *row[DB_NUMBER],**rrow;
 	for (i = 0; i < DB_NUMBER; i++) row[i] = NULL;
 	bn = ASN1_INTEGER_to_BN(ser,NULL);
+	OPENSSL_assert(bn); /* FIXME: should report an error at this point and abort */
 	if (BN_is_zero(bn))
 		itmp = BUF_strdup("00");
 	else
 		itmp = BN_bn2hex(bn);
 	row[DB_serial] = itmp;
 	BN_free(bn);
-	rrow=TXT_DB_get_by_index(db,DB_serial,row);
+	rrow=TXT_DB_get_by_index(db->db,DB_serial,row);
 	OPENSSL_free(itmp);
 	return rrow;
 	}
@@ -1241,8 +1206,141 @@ static int send_ocsp_response(BIO *cbio, OCSP_RESPONSE *resp)
 		return 0;
 	BIO_printf(cbio, http_resp, i2d_OCSP_RESPONSE(resp, NULL));
 	i2d_OCSP_RESPONSE_bio(cbio, resp);
-	BIO_flush(cbio);
+	(void)BIO_flush(cbio);
 	return 1;
 	}
 
+static OCSP_RESPONSE *query_responder(BIO *err, BIO *cbio, char *path,
+				OCSP_REQUEST *req, int req_timeout)
+	{
+	int fd;
+	int rv;
+	OCSP_REQ_CTX *ctx = NULL;
+	OCSP_RESPONSE *rsp = NULL;
+	fd_set confds;
+	struct timeval tv;
+
+	if (req_timeout != -1)
+		BIO_set_nbio(cbio, 1);
+
+	rv = BIO_do_connect(cbio);
+
+	if ((rv <= 0) && ((req_timeout == -1) || !BIO_should_retry(cbio)))
+		{
+		BIO_puts(err, "Error connecting BIO\n");
+		return NULL;
+		}
+
+	if (req_timeout == -1)
+		return OCSP_sendreq_bio(cbio, path, req);
+
+	if (BIO_get_fd(cbio, &fd) <= 0)
+		{
+		BIO_puts(err, "Can't get connection fd\n");
+		goto err;
+		}
+
+	if (rv <= 0)
+		{
+		FD_ZERO(&confds);
+		openssl_fdset(fd, &confds);
+		tv.tv_usec = 0;
+		tv.tv_sec = req_timeout;
+		rv = select(fd + 1, NULL, (void *)&confds, NULL, &tv);
+		if (rv == 0)
+			{
+			BIO_puts(err, "Timeout on connect\n");
+			return NULL;
+			}
+		}
+
+
+	ctx = OCSP_sendreq_new(cbio, path, req, -1);
+	if (!ctx)
+		return NULL;
+	
+	for (;;)
+		{
+		rv = OCSP_sendreq_nbio(&rsp, ctx);
+		if (rv != -1)
+			break;
+		FD_ZERO(&confds);
+		openssl_fdset(fd, &confds);
+		tv.tv_usec = 0;
+		tv.tv_sec = req_timeout;
+		if (BIO_should_read(cbio))
+			rv = select(fd + 1, (void *)&confds, NULL, NULL, &tv);
+		else if (BIO_should_write(cbio))
+			rv = select(fd + 1, NULL, (void *)&confds, NULL, &tv);
+		else
+			{
+			BIO_puts(err, "Unexpected retry condition\n");
+			goto err;
+			}
+		if (rv == 0)
+			{
+			BIO_puts(err, "Timeout on request\n");
+			break;
+			}
+		if (rv == -1)
+			{
+			BIO_puts(err, "Select error\n");
+			break;
+			}
+			
+		}
+	err:
+	if (ctx)
+		OCSP_REQ_CTX_free(ctx);
+
+	return rsp;
+	}
+
+OCSP_RESPONSE *process_responder(BIO *err, OCSP_REQUEST *req,
+			char *host, char *path, char *port, int use_ssl,
+			int req_timeout)
+	{
+	BIO *cbio = NULL;
+	SSL_CTX *ctx = NULL;
+	OCSP_RESPONSE *resp = NULL;
+	cbio = BIO_new_connect(host);
+	if (!cbio)
+		{
+		BIO_printf(err, "Error creating connect BIO\n");
+		goto end;
+		}
+	if (port) BIO_set_conn_port(cbio, port);
+	if (use_ssl == 1)
+		{
+		BIO *sbio;
+#if !defined(OPENSSL_NO_SSL2) && !defined(OPENSSL_NO_SSL3)
+		ctx = SSL_CTX_new(SSLv23_client_method());
+#elif !defined(OPENSSL_NO_SSL3)
+		ctx = SSL_CTX_new(SSLv3_client_method());
+#elif !defined(OPENSSL_NO_SSL2)
+		ctx = SSL_CTX_new(SSLv2_client_method());
+#else
+		BIO_printf(err, "SSL is disabled\n");
+			goto end;
+#endif
+		if (ctx == NULL)
+			{
+			BIO_printf(err, "Error creating SSL context.\n");
+			goto end;
+			}
+		SSL_CTX_set_mode(ctx, SSL_MODE_AUTO_RETRY);
+		sbio = BIO_new_ssl(ctx, 1);
+		cbio = BIO_push(sbio, cbio);
+		}
+	resp = query_responder(err, cbio, path, req, req_timeout);
+	if (!resp)
+		BIO_printf(bio_err, "Error querying OCSP responsder\n");
+	end:
+	if (ctx)
+		SSL_CTX_free(ctx);
+	if (cbio)
+		BIO_free_all(cbio);
+	return resp;
+	}
+
 #endif

apps/openssl-vms.cnf

@@ -3,9 +3,13 @@
 # This is mostly being used for generation of certificate requests.
 #
 
+# This definition stops the following lines choking if HOME isn't
+# defined.
+HOME			= .
 RANDFILE		= $ENV::HOME/.rnd
-oid_file		= $ENV::HOME/.oid
+
-oid_section		= new_oids
+# Uncomment out to enable OpenSSL configuration see config(3)
+# openssl_conf = openssl_init
 
 # To use this configuration file with the "-extfile" option of the
 # "openssl x509" utility, name here the section containing the
@@ -14,13 +18,22 @@ oid_section		= new_oids
 # (Alternatively, use a configuration file that has only
 # X.509v3 extensions in its main [= default] section.)
 
+[openssl_init]
+# Extra OBJECT IDENTIFIER info:
+oid_section = new_oids
+alg_section = algs
+
 [ new_oids ]
 
-# We can add new OIDs in here for use by 'ca' and 'req'.
+# We can add new OIDs in here for use by any config aware application
 # Add a simple OID like this:
-# testoid1=1.2.3.4
+# shortname=Long Object Identifier Name, 1.2.3.4
 # Or use config file substitution like this:
-# testoid2=${testoid1}.5.6
+# testoid2=OID2 LONG NAME, ${testoid1}.5.6, OTHER OID
+
+[ algs ]
+# Algorithm configuration options. Currently just fips_mode
+fips_mode = no
 
 ####################################################################
 [ ca ]
@@ -33,23 +46,36 @@ dir		= sys\$disk:[.demoCA	# Where everything is kept
 certs		= $dir.certs]		# Where the issued certs are kept
 crl_dir		= $dir.crl]		# Where the issued crl are kept
 database	= $dir]index.txt	# database index file.
+#unique_subject	= no			# Set to 'no' to allow creation of
+					# several ctificates with same subject.
 new_certs_dir	= $dir.newcerts]		# default place for new certs.
 
 certificate	= $dir]cacert.pem 	# The CA certificate
 serial		= $dir]serial. 		# The current serial number
+crlnumber	= $dir]crlnumber.	# the current crl number
+					# must be commented out to leave a V1 CRL
 crl		= $dir]crl.pem 		# The current CRL
 private_key	= $dir.private]cakey.pem# The private key
 RANDFILE	= $dir.private].rand	# private random number file
 
 x509_extensions	= usr_cert		# The extentions to add to the cert
 
+# Comment out the following two lines for the "traditional"
+# (and highly broken) format.
+name_opt 	= ca_default		# Subject Name options
+cert_opt 	= ca_default		# Certificate field options
+
+# Extension copying option: use with caution.
+# copy_extensions = copy
+
 # Extensions to add to a CRL. Note: Netscape communicator chokes on V2 CRLs
 # so this is commented out by default to leave a V1 CRL.
+# crlnumber must also be commented out to leave a V1 CRL.
 # crl_extensions	= crl_ext
 
 default_days	= 365			# how long to certify for
 default_crl_days= 30			# how long before next CRL
-default_md	= md5			# which md to use.
+default_md	= sha1			# which md to use.
 preserve	= no			# keep passed DN ordering
 
 # A few difference way of specifying how similar the request should look
@@ -86,16 +112,19 @@ distinguished_name	= req_distinguished_name
 attributes		= req_attributes
 x509_extensions	= v3_ca	# The extentions to add to the self signed cert
 
-# This sets the permitted types in a DirectoryString. There are several
+# Passwords for private keys if not present they will be prompted for
-# options. 
+# input_password = secret
+# output_password = secret
+
+# This sets a mask for permitted string types. There are several options. 
 # default: PrintableString, T61String, BMPString.
 # pkix	 : PrintableString, BMPString.
 # utf8only: only UTF8Strings.
-# nobmp : PrintableString, T61String (no BMPStrings).
+# nombstr : PrintableString, T61String (no BMPStrings or UTF8Strings).
 # MASK:XXXX a literal mask value.
 # WARNING: current versions of Netscape crash on BMPStrings or UTF8Strings
 # so use this option with caution!
-dirstring_type = nobmp
+string_mask = nombstr
 
 # req_extensions = v3_req # The extensions to add to a certificate request
 
@@ -124,7 +153,7 @@ commonName			= Common Name (eg, YOUR name)
 commonName_max			= 64
 
 emailAddress			= Email Address
-emailAddress_max		= 40
+emailAddress_max		= 64
 
 # SET-ex3			= SET extension number 3
 
@@ -167,11 +196,14 @@ nsComment			= "OpenSSL Generated Certificate"
 
 # PKIX recommendations harmless if included in all certificates.
 subjectKeyIdentifier=hash
-authorityKeyIdentifier=keyid,issuer:always
+authorityKeyIdentifier=keyid,issuer
 
 # This stuff is for subjectAltName and issuerAltname.
 # Import the email address.
 # subjectAltName=email:copy
+# An alternative to produce certificates that aren't
+# deprecated according to PKIX.
+# subjectAltName=email:move
 
 # Copy subject details
 # issuerAltName=issuer:copy
@@ -234,3 +266,56 @@ basicConstraints = CA:true
 
 # issuerAltName=issuer:copy
 authorityKeyIdentifier=keyid:always,issuer:always
+
+[ proxy_cert_ext ]
+# These extensions should be added when creating a proxy certificate
+
+# This goes against PKIX guidelines but some CAs do it and some software
+# requires this to avoid interpreting an end user certificate as a CA.
+
+basicConstraints=CA:FALSE
+
+# Here are some examples of the usage of nsCertType. If it is omitted
+# the certificate can be used for anything *except* object signing.
+
+# This is OK for an SSL server.
+# nsCertType			= server
+
+# For an object signing certificate this would be used.
+# nsCertType = objsign
+
+# For normal client use this is typical
+# nsCertType = client, email
+
+# and for everything including object signing:
+# nsCertType = client, email, objsign
+
+# This is typical in keyUsage for a client certificate.
+# keyUsage = nonRepudiation, digitalSignature, keyEncipherment
+
+# This will be displayed in Netscape's comment listbox.
+nsComment			= "OpenSSL Generated Certificate"
+
+# PKIX recommendations harmless if included in all certificates.
+subjectKeyIdentifier=hash
+authorityKeyIdentifier=keyid,issuer:always
+
+# This stuff is for subjectAltName and issuerAltname.
+# Import the email address.
+# subjectAltName=email:copy
+# An alternative to produce certificates that aren't
+# deprecated according to PKIX.
+# subjectAltName=email:move
+
+# Copy subject details
+# issuerAltName=issuer:copy
+
+#nsCaRevocationUrl		= http://www.domain.dom/ca-crl.pem
+#nsBaseUrl
+#nsRevocationUrl
+#nsRenewalUrl
+#nsCaPolicyUrl
+#nsSslServerName
+
+# This really needs to be in place for it to be a proxy certificate.
+proxyCertInfo=critical,language:id-ppl-anyLanguage,pathlen:3,policy:foo

apps/openssl.c

@@ -56,7 +56,7 @@
  * [including the GNU Public Licence.]
  */
 /* ====================================================================
- * Copyright (c) 1998-2001 The OpenSSL Project.  All rights reserved.
+ * Copyright (c) 1998-2006 The OpenSSL Project.  All rights reserved.
  *
  * Redistribution and use in source and binary forms, with or without
  * modification, are permitted provided that the following conditions
@@ -147,6 +147,7 @@ char *default_config_file=NULL;
 #ifdef MONOLITH
 CONF *config=NULL;
 BIO *bio_err=NULL;
+int in_FIPS_mode=0;
 #endif
 
 
@@ -163,7 +164,7 @@ static void lock_dbg_cb(int mode, int type, const char *file, int line)
 		goto err;
 		}
 
-	if (type < 0 || type > CRYPTO_NUM_LOCKS)
+	if (type < 0 || type >= CRYPTO_NUM_LOCKS)
 		{
 		errstr = "type out of bounds";
 		goto err;
@@ -220,7 +221,8 @@ int main(int Argc, char *Argv[])
 #define PROG_NAME_SIZE	39
 	char pname[PROG_NAME_SIZE+1];
 	FUNCTION f,*fp;
-	MS_STATIC char *prompt,buf[1024];
+	MS_STATIC const char *prompt;
+	MS_STATIC char buf[1024];
 	char *to_free=NULL;
 	int n,i,ret=0;
 	int argc;
@@ -231,6 +233,19 @@ int main(int Argc, char *Argv[])
 	arg.data=NULL;
 	arg.count=0;
 
+	in_FIPS_mode = 0;
+
+#ifdef OPENSSL_FIPS
+	if(getenv("OPENSSL_FIPS")) {
+		if (!FIPS_mode_set(1)) {
+			ERR_load_crypto_strings();
+			ERR_print_errors(BIO_new_fp(stderr,BIO_NOCLOSE));
+			EXIT(1);
+		}
+		in_FIPS_mode = 1;
+		}
+#endif
+
 	if (bio_err == NULL)
 		if ((bio_err=BIO_new(BIO_s_file())) != NULL)
 			BIO_set_fp(bio_err,stderr,BIO_NOCLOSE|BIO_FP_TEXT);
@@ -444,7 +459,11 @@ static int do_cmd(LHASH *prog, int argc, char *argv[])
 		for (fp=functions; fp->name != NULL; fp++)
 			{
 			nl=0;
+#ifdef OPENSSL_NO_CAMELLIA
 			if (((i++) % 5) == 0)
+#else
+			if (((i++) % 4) == 0)
+#endif
 				{
 				BIO_printf(bio_err,"\n");
 				nl=1;
@@ -465,7 +484,11 @@ static int do_cmd(LHASH *prog, int argc, char *argv[])
 					BIO_printf(bio_err,"\nCipher commands (see the `enc' command for more details)\n");
 					}
 				}
+#ifdef OPENSSL_NO_CAMELLIA
 			BIO_printf(bio_err,"%-15s",fp->name);
+#else
+			BIO_printf(bio_err,"%-18s",fp->name);
+#endif
 			}
 		BIO_printf(bio_err,"\n\n");
 		ret=0;
@@ -488,7 +511,7 @@ static LHASH *prog_init(void)
 	{
 	LHASH *ret;
 	FUNCTION *f;
-	int i;
+	size_t i;
 
 	/* Purely so it looks nice when the user hits ? */
 	for(i=0,f=functions ; f->name != NULL ; ++f,++i)
@@ -506,12 +529,12 @@ static LHASH *prog_init(void)
 /* static int MS_CALLBACK cmp(FUNCTION *a, FUNCTION *b) */
 static int MS_CALLBACK cmp(const void *a_void, const void *b_void)
 	{
-	return(strncmp(((FUNCTION *)a_void)->name,
+	return(strncmp(((const FUNCTION *)a_void)->name,
-			((FUNCTION *)b_void)->name,8));
+			((const FUNCTION *)b_void)->name,8));
 	}
 
 /* static unsigned long MS_CALLBACK hash(FUNCTION *a) */
 static unsigned long MS_CALLBACK hash(const void *a_void)
 	{
-	return(lh_strhash(((FUNCTION *)a_void)->name));
+	return(lh_strhash(((const FUNCTION *)a_void)->name));
 	}

apps/openssl.cnf

@@ -8,9 +8,8 @@
 HOME			= .
 RANDFILE		= $ENV::HOME/.rnd
 
-# Extra OBJECT IDENTIFIER info:
+# Uncomment out to enable OpenSSL configuration see config(3)
-#oid_file		= $ENV::HOME/.oid
+# openssl_conf = openssl_init
-oid_section		= new_oids
 
 # To use this configuration file with the "-extfile" option of the
 # "openssl x509" utility, name here the section containing the
@@ -19,13 +18,22 @@ oid_section		= new_oids
 # (Alternatively, use a configuration file that has only
 # X.509v3 extensions in its main [= default] section.)
 
+[openssl_init]
+# Extra OBJECT IDENTIFIER info:
+oid_section = new_oids
+alg_section = algs
+
 [ new_oids ]
 
-# We can add new OIDs in here for use by 'ca' and 'req'.
+# We can add new OIDs in here for use by any config aware application
 # Add a simple OID like this:
-# testoid1=1.2.3.4
+# shortname=Long Object Identifier Name, 1.2.3.4
 # Or use config file substitution like this:
-# testoid2=${testoid1}.5.6
+# testoid2=OID2 LONG NAME, ${testoid1}.5.6, OTHER OID
+
+[ algs ]
+# Algorithm configuration options. Currently just fips_mode
+fips_mode = no
 
 ####################################################################
 [ ca ]
@@ -38,10 +46,14 @@ dir		= ./demoCA		# Where everything is kept
 certs		= $dir/certs		# Where the issued certs are kept
 crl_dir		= $dir/crl		# Where the issued crl are kept
 database	= $dir/index.txt	# database index file.
+#unique_subject	= no			# Set to 'no' to allow creation of
+					# several ctificates with same subject.
 new_certs_dir	= $dir/newcerts		# default place for new certs.
 
 certificate	= $dir/cacert.pem 	# The CA certificate
 serial		= $dir/serial 		# The current serial number
+crlnumber	= $dir/crlnumber	# the current crl number
+					# must be commented out to leave a V1 CRL
 crl		= $dir/crl.pem 		# The current CRL
 private_key	= $dir/private/cakey.pem# The private key
 RANDFILE	= $dir/private/.rand	# private random number file
@@ -58,11 +70,12 @@ cert_opt 	= ca_default		# Certificate field options
 
 # Extensions to add to a CRL. Note: Netscape communicator chokes on V2 CRLs
 # so this is commented out by default to leave a V1 CRL.
+# crlnumber must also be commented out to leave a V1 CRL.
 # crl_extensions	= crl_ext
 
 default_days	= 365			# how long to certify for
 default_crl_days= 30			# how long before next CRL
-default_md	= md5			# which md to use.
+default_md	= sha1			# which md to use.
 preserve	= no			# keep passed DN ordering
 
 # A few difference way of specifying how similar the request should look
@@ -183,7 +196,7 @@ nsComment			= "OpenSSL Generated Certificate"
 
 # PKIX recommendations harmless if included in all certificates.
 subjectKeyIdentifier=hash
-authorityKeyIdentifier=keyid,issuer:always
+authorityKeyIdentifier=keyid,issuer
 
 # This stuff is for subjectAltName and issuerAltname.
 # Import the email address.
@@ -253,3 +266,56 @@ basicConstraints = CA:true
 
 # issuerAltName=issuer:copy
 authorityKeyIdentifier=keyid:always,issuer:always
+
+[ proxy_cert_ext ]
+# These extensions should be added when creating a proxy certificate
+
+# This goes against PKIX guidelines but some CAs do it and some software
+# requires this to avoid interpreting an end user certificate as a CA.
+
+basicConstraints=CA:FALSE
+
+# Here are some examples of the usage of nsCertType. If it is omitted
+# the certificate can be used for anything *except* object signing.
+
+# This is OK for an SSL server.
+# nsCertType			= server
+
+# For an object signing certificate this would be used.
+# nsCertType = objsign
+
+# For normal client use this is typical
+# nsCertType = client, email
+
+# and for everything including object signing:
+# nsCertType = client, email, objsign
+
+# This is typical in keyUsage for a client certificate.
+# keyUsage = nonRepudiation, digitalSignature, keyEncipherment
+
+# This will be displayed in Netscape's comment listbox.
+nsComment			= "OpenSSL Generated Certificate"
+
+# PKIX recommendations harmless if included in all certificates.
+subjectKeyIdentifier=hash
+authorityKeyIdentifier=keyid,issuer:always
+
+# This stuff is for subjectAltName and issuerAltname.
+# Import the email address.
+# subjectAltName=email:copy
+# An alternative to produce certificates that aren't
+# deprecated according to PKIX.
+# subjectAltName=email:move
+
+# Copy subject details
+# issuerAltName=issuer:copy
+
+#nsCaRevocationUrl		= http://www.domain.dom/ca-crl.pem
+#nsBaseUrl
+#nsRevocationUrl
+#nsRenewalUrl
+#nsCaPolicyUrl
+#nsSslServerName
+
+# This really needs to be in place for it to be a proxy certificate.
+proxyCertInfo=critical,language:id-ppl-anyLanguage,pathlen:3,policy:foo

apps/passwd.c

@@ -312,7 +312,8 @@ static char *md5crypt(const char *passwd, const char *magic, const char *salt)
 	static char out_buf[6 + 9 + 24 + 2]; /* "$apr1$..salt..$.......md5hash..........\0" */
 	unsigned char buf[MD5_DIGEST_LENGTH];
 	char *salt_out;
-	int n, i;
+	int n;
+	unsigned int i;
 	EVP_MD_CTX md,md2;
 	size_t passwd_len, salt_len;
 
@@ -358,13 +359,13 @@ static char *md5crypt(const char *passwd, const char *magic, const char *salt)
 	for (i = 0; i < 1000; i++)
 		{
 		EVP_DigestInit_ex(&md2,EVP_md5(), NULL);
-		EVP_DigestUpdate(&md2, (i & 1) ? (unsigned char *) passwd : buf,
+		EVP_DigestUpdate(&md2, (i & 1) ? (unsigned const char *) passwd : buf,
 		                       (i & 1) ? passwd_len : sizeof buf);
 		if (i % 3)
 			EVP_DigestUpdate(&md2, salt_out, salt_len);
 		if (i % 7)
 			EVP_DigestUpdate(&md2, passwd, passwd_len);
-		EVP_DigestUpdate(&md2, (i & 1) ? buf : (unsigned char *) passwd,
+		EVP_DigestUpdate(&md2, (i & 1) ? buf : (unsigned const char *) passwd,
 		                       (i & 1) ? sizeof buf : passwd_len);
 		EVP_DigestFinal_ex(&md2, buf, NULL);
 		}
@@ -473,7 +474,8 @@ static int do_passwd(int passed_salt, char **salt_p, char **salt_malloc_p,
 	if ((strlen(passwd) > pw_maxlen))
 		{
 		if (!quiet)
-			BIO_printf(bio_err, "Warning: truncating password to %u characters\n", pw_maxlen);
+			/* XXX: really we should know how to print a size_t, not cast it */
+			BIO_printf(bio_err, "Warning: truncating password to %u characters\n", (unsigned)pw_maxlen);
 		passwd[pw_maxlen] = 0;
 		}
 	assert(strlen(passwd) <= pw_maxlen);

apps/pkcs12.c

@@ -1,11 +1,9 @@
 /* pkcs12.c */
-#if !defined(OPENSSL_NO_DES) && !defined(OPENSSL_NO_SHA1)
-
 /* Written by Dr Stephen N Henson (shenson@bigfoot.com) for the OpenSSL
- * project 1999.
+ * project.
  */
 /* ====================================================================
- * Copyright (c) 1999 The OpenSSL Project.  All rights reserved.
+ * Copyright (c) 1999-2006 The OpenSSL Project.  All rights reserved.
  *
  * Redistribution and use in source and binary forms, with or without
  * modification, are permitted provided that the following conditions
@@ -58,6 +56,9 @@
  *
  */
 
+#include <openssl/opensslconf.h>
+#if !defined(OPENSSL_NO_DES) && !defined(OPENSSL_NO_SHA1)
+
 #include <stdio.h>
 #include <stdlib.h>
 #include <string.h>
@@ -83,7 +84,7 @@ int dump_certs_keys_p12(BIO *out, PKCS12 *p12, char *pass, int passlen, int opti
 int dump_certs_pkeys_bags(BIO *out, STACK_OF(PKCS12_SAFEBAG) *bags, char *pass,
 			  int passlen, int options, char *pempass);
 int dump_certs_pkeys_bag(BIO *out, PKCS12_SAFEBAG *bags, char *pass, int passlen, int options, char *pempass);
-int print_attribs(BIO *out, STACK_OF(X509_ATTRIBUTE) *attrlst, char *name);
+int print_attribs(BIO *out, STACK_OF(X509_ATTRIBUTE) *attrlst,const char *name);
 void hex_prin(BIO *out, unsigned char *buf, int len);
 int alg_print(BIO *x, X509_ALGOR *alg);
 int cert_load(BIO *in, STACK_OF(X509) *sk);
@@ -99,6 +100,7 @@ int MAIN(int argc, char **argv)
     char **args;
     char *name = NULL;
     char *csp_name = NULL;
+    int add_lmk = 0;
     PKCS12 *p12 = NULL;
     char pass[50], macpass[50];
     int export_cert = 0;
@@ -109,7 +111,7 @@ int MAIN(int argc, char **argv)
     int maciter = PKCS12_DEFAULT_ITER;
     int twopass = 0;
     int keytype = 0;
-    int cert_pbe = NID_pbe_WithSHA1And40BitRC2_CBC;
+    int cert_pbe;
     int key_pbe = NID_pbe_WithSHA1And3_Key_TripleDES_CBC;
     int ret = 1;
     int macver = 1;
@@ -126,6 +128,13 @@ int MAIN(int argc, char **argv)
 
     apps_startup();
 
+#ifdef OPENSSL_FIPS
+    if (FIPS_mode())
+	cert_pbe = NID_pbe_WithSHA1And3_Key_TripleDES_CBC;
+    else
+#endif
+    cert_pbe = NID_pbe_WithSHA1And40BitRC2_CBC;
+
     enc = EVP_des_ede3_cbc();
     if (bio_err == NULL ) bio_err = BIO_new_fp (stderr, BIO_NOCLOSE);
 
@@ -152,24 +161,37 @@ int MAIN(int argc, char **argv)
     			cert_pbe = NID_pbe_WithSHA1And3_Key_TripleDES_CBC;
 		else if (!strcmp (*args, "-export")) export_cert = 1;
 		else if (!strcmp (*args, "-des")) enc=EVP_des_cbc();
+		else if (!strcmp (*args, "-des3")) enc = EVP_des_ede3_cbc();
 #ifndef OPENSSL_NO_IDEA
 		else if (!strcmp (*args, "-idea")) enc=EVP_idea_cbc();
 #endif
-		else if (!strcmp (*args, "-des3")) enc = EVP_des_ede3_cbc();
+#ifndef OPENSSL_NO_SEED
+		else if (!strcmp(*args, "-seed")) enc=EVP_seed_cbc();
+#endif
 #ifndef OPENSSL_NO_AES
 		else if (!strcmp(*args,"-aes128")) enc=EVP_aes_128_cbc();
 		else if (!strcmp(*args,"-aes192")) enc=EVP_aes_192_cbc();
 		else if (!strcmp(*args,"-aes256")) enc=EVP_aes_256_cbc();
+#endif
+#ifndef OPENSSL_NO_CAMELLIA
+		else if (!strcmp(*args,"-camellia128")) enc=EVP_camellia_128_cbc();
+		else if (!strcmp(*args,"-camellia192")) enc=EVP_camellia_192_cbc();
+		else if (!strcmp(*args,"-camellia256")) enc=EVP_camellia_256_cbc();
 #endif
 		else if (!strcmp (*args, "-noiter")) iter = 1;
 		else if (!strcmp (*args, "-maciter"))
 					 maciter = PKCS12_DEFAULT_ITER;
 		else if (!strcmp (*args, "-nomaciter"))
 					 maciter = 1;
+		else if (!strcmp (*args, "-nomac"))
+					 maciter = -1;
 		else if (!strcmp (*args, "-nodes")) enc=NULL;
 		else if (!strcmp (*args, "-certpbe")) {
 			if (args[1]) {
 				args++;
+				if (!strcmp(*args, "NONE"))
+					cert_pbe = -1;
+				else
 					cert_pbe=OBJ_txt2nid(*args);
 				if(cert_pbe == NID_undef) {
 					BIO_printf(bio_err,
@@ -180,6 +202,9 @@ int MAIN(int argc, char **argv)
 		} else if (!strcmp (*args, "-keypbe")) {
 			if (args[1]) {
 				args++;
+				if (!strcmp(*args, "NONE"))
+					key_pbe = -1;
+				else
 					key_pbe=OBJ_txt2nid(*args);
 				if(key_pbe == NID_undef) {
 					BIO_printf(bio_err,
@@ -207,7 +232,9 @@ int MAIN(int argc, char **argv)
 			args++;	
 			name = *args;
 		    } else badarg = 1;
-		} else if (!strcmp (*args, "-CSP")) {
+		} else if (!strcmp (*args, "-LMK"))
+			add_lmk = 1;
+		else if (!strcmp (*args, "-CSP")) {
 		    if (args[1]) {
 			args++;	
 			csp_name = *args;
@@ -292,9 +319,16 @@ int MAIN(int argc, char **argv)
 #ifndef OPENSSL_NO_IDEA
 	BIO_printf (bio_err, "-idea         encrypt private keys with idea\n");
 #endif
+#ifndef OPENSSL_NO_SEED
+	BIO_printf (bio_err, "-seed         encrypt private keys with seed\n");
+#endif
 #ifndef OPENSSL_NO_AES
 	BIO_printf (bio_err, "-aes128, -aes192, -aes256\n");
 	BIO_printf (bio_err, "              encrypt PEM output with cbc aes\n");
+#endif
+#ifndef OPENSSL_NO_CAMELLIA
+	BIO_printf (bio_err, "-camellia128, -camellia192, -camellia256\n");
+	BIO_printf (bio_err, "              encrypt PEM output with cbc camellia\n");
 #endif
 	BIO_printf (bio_err, "-nodes        don't encrypt private keys\n");
 	BIO_printf (bio_err, "-noiter       don't use encryption iteration\n");
@@ -314,6 +348,8 @@ int MAIN(int argc, char **argv)
 	BIO_printf(bio_err,  "-rand file%cfile%c...\n", LIST_SEPARATOR_CHAR, LIST_SEPARATOR_CHAR);
 	BIO_printf(bio_err,  "              load the file (or the files in the directory) into\n");
 	BIO_printf(bio_err,  "              the random number generator\n");
+  	BIO_printf(bio_err,  "-CSP name     Microsoft CSP name\n");
+ 	BIO_printf(bio_err,  "-LMK          Add local machine keyset attribute to private key\n");
     	goto end;
     }
 
@@ -365,24 +401,6 @@ int MAIN(int argc, char **argv)
 	    goto end;
    }
 
-#if 0
-   if (certfile) {
-    	if(!(certsin = BIO_new_file(certfile, "r"))) {
-	    BIO_printf(bio_err, "Can't open certificate file %s\n", certfile);
-	    perror (certfile);
-	    goto end;
-	}
-    }
-
-    if (keyname) {
-    	if(!(inkey = BIO_new_file(keyname, "r"))) {
-	    BIO_printf(bio_err, "Can't key certificate file %s\n", keyname);
-	    perror (keyname);
-	    goto end;
-	}
-     }
-#endif
-
 #ifdef CRYPTO_MDEBUG
     CRYPTO_pop_info();
     CRYPTO_push_info("write files");
@@ -419,25 +437,29 @@ int MAIN(int argc, char **argv)
 
     if (export_cert) {
 	EVP_PKEY *key = NULL;
-	STACK_OF(PKCS12_SAFEBAG) *bags = NULL;
+	X509 *ucert = NULL, *x = NULL;
-	STACK_OF(PKCS7) *safes = NULL;
-	PKCS12_SAFEBAG *bag = NULL;
-	PKCS8_PRIV_KEY_INFO *p8 = NULL;
-	PKCS7 *authsafe = NULL;
-	X509 *ucert = NULL;
 	STACK_OF(X509) *certs=NULL;
-	char *catmp = NULL;
+	unsigned char *catmp = NULL;
 	int i;
-	unsigned char keyid[EVP_MAX_MD_SIZE];
+
-	unsigned int keyidlen = 0;
+	if ((options & (NOCERTS|NOKEYS)) == (NOCERTS|NOKEYS))
+		{	
+		BIO_printf(bio_err, "Nothing to do!\n");
+		goto export_end;
+		}
+
+	if (options & NOCERTS)
+		chain = 0;
 
 #ifdef CRYPTO_MDEBUG
 	CRYPTO_push_info("process -export_cert");
 	CRYPTO_push_info("reading private key");
 #endif
-	key = load_key(bio_err, keyname ? keyname : infile, FORMAT_PEM, 1,
+	if (!(options & NOKEYS))
-		passin, e, "private key");
+		{
-	if (!key) {
+		key = load_key(bio_err, keyname ? keyname : infile,
+				FORMAT_PEM, 1, passin, e, "private key");
+		if (!key)
 			goto export_end;
 		}
 
@@ -447,9 +469,37 @@ int MAIN(int argc, char **argv)
 #endif
 
 	/* Load in all certs in input file */
-	if(!(certs = load_certs(bio_err, infile, FORMAT_PEM, NULL, e,
+	if(!(options & NOCERTS))
-		"certificates"))) {
+		{
+		certs = load_certs(bio_err, infile, FORMAT_PEM, NULL, e,
+							"certificates");
+		if (!certs)
 			goto export_end;
+
+		if (key)
+			{
+			/* Look for matching private key */
+			for(i = 0; i < sk_X509_num(certs); i++)
+				{
+				x = sk_X509_value(certs, i);
+				if(X509_check_private_key(x, key))
+					{
+					ucert = x;
+					/* Zero keyid and alias */
+					X509_keyid_set1(ucert, NULL, 0);
+					X509_alias_set1(ucert, NULL, 0);
+					/* Remove from list */
+					(void)sk_X509_delete(certs, i);
+					break;
+					}
+				}
+			if (!ucert)
+				{
+				BIO_printf(bio_err, "No certificate matches private key\n");
+				goto export_end;
+				}
+			}
+
 		}
 
 #ifdef CRYPTO_MDEBUG
@@ -457,17 +507,17 @@ int MAIN(int argc, char **argv)
 	CRYPTO_push_info("reading certs from input 2");
 #endif
 
-	for(i = 0; i < sk_X509_num(certs); i++) {
+	/* Add any more certificates asked for */
-		ucert = sk_X509_value(certs, i);
+	if(certfile)
-		if(X509_check_private_key(ucert, key)) {
+		{
-			X509_digest(ucert, EVP_sha1(), keyid, &keyidlen);
+		STACK_OF(X509) *morecerts=NULL;
-			break;
+		if(!(morecerts = load_certs(bio_err, certfile, FORMAT_PEM,
-		}
+					    NULL, e,
-	}
+					    "certificates from certfile")))
-	if(!keyidlen) {
-		ucert = NULL;
-		BIO_printf(bio_err, "No certificate matches private key\n");
 			goto export_end;
+		while(sk_X509_num(morecerts) > 0)
+			sk_X509_push(certs, sk_X509_shift(morecerts));
+		sk_X509_free(morecerts);
  		}
 
 #ifdef CRYPTO_MDEBUG
@@ -475,22 +525,6 @@ int MAIN(int argc, char **argv)
 	CRYPTO_push_info("reading certs from certfile");
 #endif
 
-	bags = sk_PKCS12_SAFEBAG_new_null ();
-
-	/* Add any more certificates asked for */
-	if (certfile) {
-		STACK_OF(X509) *morecerts=NULL;
-		if(!(morecerts = load_certs(bio_err, certfile, FORMAT_PEM,
-					    NULL, e,
-					    "certificates from certfile"))) {
-			goto export_end;
-		}
-		while(sk_X509_num(morecerts) > 0) {
-			sk_X509_push(certs, sk_X509_shift(morecerts));
-		}
-		sk_X509_free(morecerts);
- 	}
-
 #ifdef CRYPTO_MDEBUG
 	CRYPTO_pop_info();
 	CRYPTO_push_info("building chain");
@@ -520,98 +554,58 @@ int MAIN(int argc, char **argv)
 		    X509_free(sk_X509_value(chain2, 0));
 		    sk_X509_free(chain2);
 		} else {
+			if (vret >= 0)
 				BIO_printf (bio_err, "Error %s getting chain.\n",
 					X509_verify_cert_error_string(vret));
+			else
+				ERR_print_errors(bio_err);
 			goto export_end;
 		}			
     	}
 
-#ifdef CRYPTO_MDEBUG
+	/* Add any CA names */
-	CRYPTO_pop_info();
-	CRYPTO_push_info("building bags");
-#endif
 
-	/* We now have loads of certificates: include them all */
+	for (i = 0; i < sk_num(canames); i++)
-	for(i = 0; i < sk_X509_num(certs); i++) {
+		{
-		X509 *cert = NULL;
+		catmp = (unsigned char *)sk_value(canames, i);
-		cert = sk_X509_value(certs, i);
+		X509_alias_set1(sk_X509_value(certs, i), catmp, -1);
-		bag = PKCS12_x5092certbag(cert);
-		/* If it matches private key set id */
-		if(cert == ucert) {
-			if(name) PKCS12_add_friendlyname(bag, name, -1);
-			PKCS12_add_localkeyid(bag, keyid, keyidlen);
-		} else if((catmp = sk_shift(canames))) 
-				PKCS12_add_friendlyname(bag, catmp, -1);
-		sk_PKCS12_SAFEBAG_push(bags, bag);
 		}
-	sk_X509_pop_free(certs, X509_free);
+
-	certs = NULL;
+	if (csp_name && key)
+		EVP_PKEY_add1_attr_by_NID(key, NID_ms_csp_name,
+				MBSTRING_ASC, (unsigned char *)csp_name, -1);
+
+	if (add_lmk && key)
+		EVP_PKEY_add1_attr_by_NID(key, NID_LocalKeySet, 0, NULL, -1);
 
 #ifdef CRYPTO_MDEBUG
 	CRYPTO_pop_info();
-	CRYPTO_push_info("encrypting bags");
+	CRYPTO_push_info("reading password");
 #endif
 
 	if(!noprompt &&
-		EVP_read_pw_string(pass, sizeof pass, "Enter Export Password:", 1)) {
+		EVP_read_pw_string(pass, sizeof pass, "Enter Export Password:", 1))
+		{
 	    	BIO_printf (bio_err, "Can't read Password\n");
 	    	goto export_end;
         	}
-	if (!twopass) strcpy(macpass, pass);
+	if (!twopass) BUF_strlcpy(macpass, pass, sizeof macpass);
-	/* Turn certbags into encrypted authsafe */
-	authsafe = PKCS12_pack_p7encdata(cert_pbe, cpass, -1, NULL, 0,
-								 iter, bags);
-	sk_PKCS12_SAFEBAG_pop_free(bags, PKCS12_SAFEBAG_free);
-	bags = NULL;
 
-	if (!authsafe) {
+#ifdef CRYPTO_MDEBUG
+	CRYPTO_pop_info();
+	CRYPTO_push_info("creating PKCS#12 structure");
+#endif
+
+	p12 = PKCS12_create(cpass, name, key, ucert, certs,
+				key_pbe, cert_pbe, iter, -1, keytype);
+
+	if (!p12)
+		{
 	    	ERR_print_errors (bio_err);
 		goto export_end;
 		}
 
-	safes = sk_PKCS7_new_null ();
+	if (maciter != -1)
-	sk_PKCS7_push (safes, authsafe);
-
-#ifdef CRYPTO_MDEBUG
-	CRYPTO_pop_info();
-	CRYPTO_push_info("building shrouded key bag");
-#endif
-
-	/* Make a shrouded key bag */
-	p8 = EVP_PKEY2PKCS8 (key);
-	if(keytype) PKCS8_add_keyusage(p8, keytype);
-	bag = PKCS12_MAKE_SHKEYBAG(key_pbe, cpass, -1, NULL, 0, iter, p8);
-	PKCS8_PRIV_KEY_INFO_free(p8);
-	p8 = NULL;
-        if (name) PKCS12_add_friendlyname (bag, name, -1);
-	if(csp_name) PKCS12_add_CSPName_asc(bag, csp_name, -1);
-	PKCS12_add_localkeyid (bag, keyid, keyidlen);
-	bags = sk_PKCS12_SAFEBAG_new_null();
-	sk_PKCS12_SAFEBAG_push (bags, bag);
-
-#ifdef CRYPTO_MDEBUG
-	CRYPTO_pop_info();
-	CRYPTO_push_info("encrypting shrouded key bag");
-#endif
-
-	/* Turn it into unencrypted safe bag */
-	authsafe = PKCS12_pack_p7data (bags);
-	sk_PKCS12_SAFEBAG_pop_free(bags, PKCS12_SAFEBAG_free);
-	bags = NULL;
-	sk_PKCS7_push (safes, authsafe);
-
-#ifdef CRYPTO_MDEBUG
-	CRYPTO_pop_info();
-	CRYPTO_push_info("building pkcs12");
-#endif
-
-	p12 = PKCS12_init(NID_pkcs7_data);
-
-	PKCS12_pack_authsafes(p12, safes);
-
-	sk_PKCS7_pop_free(safes, PKCS7_free);
-	safes = NULL;
-
 		PKCS12_set_mac(p12, mpass, -1, NULL, 0, maciter, NULL);
 
 #ifdef CRYPTO_MDEBUG
@@ -632,8 +626,7 @@ int MAIN(int argc, char **argv)
 
 	if (key) EVP_PKEY_free(key);
 	if (certs) sk_X509_pop_free(certs, X509_free);
-	if (safes) sk_PKCS7_pop_free(safes, PKCS7_free);
+	if (ucert) X509_free(ucert);
-	if (bags) sk_PKCS12_SAFEBAG_pop_free(bags, PKCS12_SAFEBAG_free);
 
 #ifdef CRYPTO_MDEBUG
 	CRYPTO_pop_info();
@@ -658,7 +651,7 @@ int MAIN(int argc, char **argv)
     CRYPTO_pop_info();
 #endif
 
-    if (!twopass) strcpy(macpass, pass);
+    if (!twopass) BUF_strlcpy(macpass, pass, sizeof macpass);
 
     if (options & INFO) BIO_printf (bio_err, "MAC Iteration %ld\n", p12->mac->iter ? ASN1_INTEGER_get (p12->mac->iter) : 1);
     if(macver) {
@@ -666,7 +659,7 @@ int MAIN(int argc, char **argv)
     CRYPTO_push_info("verify MAC");
 #endif
 	/* If we enter empty password try no password first */
-	if(!macpass[0] && PKCS12_verify_mac(p12, NULL, 0)) {
+	if(!mpass[0] && PKCS12_verify_mac(p12, NULL, 0)) {
 		/* If mac and crypto pass the same set it to NULL too */
 		if(!twopass) cpass = NULL;
 	} else if (!PKCS12_verify_mac(p12, mpass, -1)) {
@@ -710,9 +703,10 @@ int MAIN(int argc, char **argv)
 int dump_certs_keys_p12 (BIO *out, PKCS12 *p12, char *pass,
 	     int passlen, int options, char *pempass)
 {
-	STACK_OF(PKCS7) *asafes;
+	STACK_OF(PKCS7) *asafes = NULL;
 	STACK_OF(PKCS12_SAFEBAG) *bags;
 	int i, bagnid;
+	int ret = 0;
 	PKCS7 *p7;
 
 	if (!( asafes = PKCS12_unpack_authsafes(p12))) return 0;
@@ -730,16 +724,22 @@ int dump_certs_keys_p12 (BIO *out, PKCS12 *p12, char *pass,
 			}
 			bags = PKCS12_unpack_p7encdata(p7, pass, passlen);
 		} else continue;
-		if (!bags) return 0;
+		if (!bags) goto err;
 	    	if (!dump_certs_pkeys_bags (out, bags, pass, passlen, 
 						 options, pempass)) {
 			sk_PKCS12_SAFEBAG_pop_free (bags, PKCS12_SAFEBAG_free);
-			return 0;
+			goto err;
 		}
 		sk_PKCS12_SAFEBAG_pop_free (bags, PKCS12_SAFEBAG_free);
+		bags = NULL;
 	}
+	ret = 1;
+
+	err:
+
+	if (asafes)
 		sk_PKCS7_pop_free (asafes, PKCS7_free);
-	return 1;
+	return ret;
 }
 
 int dump_certs_pkeys_bags (BIO *out, STACK_OF(PKCS12_SAFEBAG) *bags,
@@ -834,7 +834,7 @@ int get_cert_chain (X509 *cert, X509_STORE *store, STACK_OF(X509) **chain)
 {
 	X509_STORE_CTX store_ctx;
 	STACK_OF(X509) *chn;
-	int i;
+	int i = 0;
 
 	/* FIXME: Should really check the return status of X509_STORE_CTX_init
 	 * for an error, but how that fits into the return value of this
@@ -842,13 +842,17 @@ int get_cert_chain (X509 *cert, X509_STORE *store, STACK_OF(X509) **chain)
 	X509_STORE_CTX_init(&store_ctx, store, cert, NULL);
 	if (X509_verify_cert(&store_ctx) <= 0) {
 		i = X509_STORE_CTX_get_error (&store_ctx);
+		if (i == 0)
+			/* avoid returning 0 if X509_verify_cert() did not
+			 * set an appropriate error value in the context */
+			i = -1;
+		chn = NULL;
 		goto err;
-	}
+	} else
 		chn = X509_STORE_CTX_get1_chain(&store_ctx);
-	i = 0;
-	*chain = chn;
 err:
 	X509_STORE_CTX_cleanup(&store_ctx);
+	*chain = chn;
 	
 	return i;
 }	
@@ -856,13 +860,16 @@ err:
 int alg_print (BIO *x, X509_ALGOR *alg)
 {
 	PBEPARAM *pbe;
-	unsigned char *p;
+	const unsigned char *p;
 	p = alg->parameter->value.sequence->data;
 	pbe = d2i_PBEPARAM(NULL, &p, alg->parameter->value.sequence->length);
-	BIO_printf (bio_err, "%s, Iteration %d\n", 
+	if (!pbe)
-	OBJ_nid2ln(OBJ_obj2nid(alg->algorithm)), ASN1_INTEGER_get(pbe->iter));
+		return 1;
+	BIO_printf (bio_err, "%s, Iteration %ld\n", 
+		OBJ_nid2ln(OBJ_obj2nid(alg->algorithm)),
+		ASN1_INTEGER_get(pbe->iter));
 	PBEPARAM_free (pbe);
-	return 0;
+	return 1;
 }
 
 /* Load all certificates from a given file */
@@ -894,7 +901,7 @@ int cert_load(BIO *in, STACK_OF(X509) *sk)
 
 /* Generalised attribute print: handle PKCS#8 and bag attributes */
 
-int print_attribs (BIO *out, STACK_OF(X509_ATTRIBUTE) *attrlst, char *name)
+int print_attribs (BIO *out, STACK_OF(X509_ATTRIBUTE) *attrlst,const char *name)
 {
 	X509_ATTRIBUTE *attr;
 	ASN1_TYPE *av;

apps/pkcs7.c

@@ -102,6 +102,9 @@ int MAIN(int argc, char **argv)
 		if ((bio_err=BIO_new(BIO_s_file())) != NULL)
 			BIO_set_fp(bio_err,stderr,BIO_NOCLOSE|BIO_FP_TEXT);
 
+	if (!load_config(bio_err, NULL))
+		goto end;
+
 	infile=NULL;
 	outfile=NULL;
 	informat=FORMAT_PEM;

apps/pkcs8.c

@@ -1,6 +1,6 @@
 /* pkcs8.c */
 /* Written by Dr Stephen N Henson (shenson@bigfoot.com) for the OpenSSL
- * project 1999.
+ * project 1999-2004.
  */
 /* ====================================================================
  * Copyright (c) 1999 The OpenSSL Project.  All rights reserved.
@@ -100,43 +100,70 @@ int MAIN(int argc, char **argv)
 	ERR_load_crypto_strings();
 	OpenSSL_add_all_algorithms();
 	args = argv + 1;
-	while (!badarg && *args && *args[0] == '-') {
+	while (!badarg && *args && *args[0] == '-')
-		if (!strcmp(*args,"-v2")) {
+		{
-			if (args[1]) {
+		if (!strcmp(*args,"-v2"))
+			{
+			if (args[1])
+				{
 				args++;
 				cipher=EVP_get_cipherbyname(*args);
-				if(!cipher) {
+				if (!cipher)
+					{
 					BIO_printf(bio_err,
 						 "Unknown cipher %s\n", *args);
 					badarg = 1;
 					}
-			} else badarg = 1;
+				}
-		} else if (!strcmp(*args,"-v1")) {
+			else
-			if (args[1]) {
+				badarg = 1;
+			}
+		else if (!strcmp(*args,"-v1"))
+			{
+			if (args[1])
+				{
 				args++;
 				pbe_nid=OBJ_txt2nid(*args);
-				if(pbe_nid == NID_undef) {
+				if (pbe_nid == NID_undef)
+					{
 					BIO_printf(bio_err,
 						 "Unknown PBE algorithm %s\n", *args);
 					badarg = 1;
 					}
-			} else badarg = 1;
+				}
-		} else if (!strcmp(*args,"-inform")) {
+			else
-			if (args[1]) {
+				badarg = 1;
+			}
+		else if (!strcmp(*args,"-inform"))
+			{
+			if (args[1])
+				{
 				args++;
 				informat=str2fmt(*args);
-			} else badarg = 1;
+				}
-		} else if (!strcmp(*args,"-outform")) {
+			else badarg = 1;
-			if (args[1]) {
+			}
+		else if (!strcmp(*args,"-outform"))
+			{
+			if (args[1])
+				{
 				args++;
 				outformat=str2fmt(*args);
-			} else badarg = 1;
+				}
-		} else if (!strcmp (*args, "-topk8")) topk8 = 1;
+			else badarg = 1;
-		else if (!strcmp (*args, "-noiter")) iter = 1;
+			}
-		else if (!strcmp (*args, "-nocrypt")) nocrypt = 1;
+		else if (!strcmp (*args, "-topk8"))
-		else if (!strcmp (*args, "-nooct")) p8_broken = PKCS8_NO_OCTET;
+			topk8 = 1;
-		else if (!strcmp (*args, "-nsdb")) p8_broken = PKCS8_NS_DB;
+		else if (!strcmp (*args, "-noiter"))
-		else if (!strcmp (*args, "-embed")) p8_broken = PKCS8_EMBEDDED_PARAM;
+			iter = 1;
+		else if (!strcmp (*args, "-nocrypt"))
+			nocrypt = 1;
+		else if (!strcmp (*args, "-nooct"))
+			p8_broken = PKCS8_NO_OCTET;
+		else if (!strcmp (*args, "-nsdb"))
+			p8_broken = PKCS8_NS_DB;
+		else if (!strcmp (*args, "-embed"))
+			p8_broken = PKCS8_EMBEDDED_PARAM;
 		else if (!strcmp(*args,"-passin"))
 			{
 			if (!args[1]) goto bad;
@@ -154,21 +181,30 @@ int MAIN(int argc, char **argv)
 			engine= *(++args);
 			}
 #endif
-		else if (!strcmp (*args, "-in")) {
+		else if (!strcmp (*args, "-in"))
-			if (args[1]) {
+			{
+			if (args[1])
+				{
 				args++;
 				infile = *args;
-			} else badarg = 1;
+				}
-		} else if (!strcmp (*args, "-out")) {
+			else badarg = 1;
-			if (args[1]) {
+			}
+		else if (!strcmp (*args, "-out"))
+			{
+			if (args[1])
+				{
 				args++;
 				outfile = *args;
-			} else badarg = 1;
+				}
-		} else badarg = 1;
+			else badarg = 1;
+			}
+		else badarg = 1;
 		args++;
 		}
 
-	if (badarg) {
+	if (badarg)
+		{
 		bad:
 		BIO_printf(bio_err, "Usage pkcs8 [options]\n");
 		BIO_printf(bio_err, "where options are\n");
@@ -189,35 +225,45 @@ int MAIN(int argc, char **argv)
 #ifndef OPENSSL_NO_ENGINE
 		BIO_printf(bio_err," -engine e       use engine e, possibly a hardware device.\n");
 #endif
-		return (1);
+		return 1;
 		}
 
 #ifndef OPENSSL_NO_ENGINE
         e = setup_engine(bio_err, engine, 0);
 #endif
 
-	if(!app_passwd(bio_err, passargin, passargout, &passin, &passout)) {
+	if (!app_passwd(bio_err, passargin, passargout, &passin, &passout))
+		{
 		BIO_printf(bio_err, "Error getting passwords\n");
-		return (1);
+		return 1;
 		}
 
-	if ((pbe_nid == -1) && !cipher) pbe_nid = NID_pbeWithMD5AndDES_CBC;
+	if ((pbe_nid == -1) && !cipher)
+		pbe_nid = NID_pbeWithMD5AndDES_CBC;
 
-	if (infile) {
+	if (infile)
-		if (!(in = BIO_new_file(infile, "rb"))) {
+		{
+		if (!(in = BIO_new_file(infile, "rb")))
+			{
 			BIO_printf(bio_err,
 				 "Can't open input file %s\n", infile);
 			return (1);
 			}
-	} else in = BIO_new_fp (stdin, BIO_NOCLOSE);
+		}
+	else
+		in = BIO_new_fp (stdin, BIO_NOCLOSE);
 
-	if (outfile) {
+	if (outfile)
-		if (!(out = BIO_new_file (outfile, "wb"))) {
+		{
+		if (!(out = BIO_new_file (outfile, "wb")))
+			{
 			BIO_printf(bio_err,
 				 "Can't open output file %s\n", outfile);
 			return (1);
 			}
-	} else {
+		}
+	else
+		{
 		out = BIO_new_fp (stdout, BIO_NOCLOSE);
 #ifdef OPENSSL_SYS_VMS
 			{
@@ -231,37 +277,59 @@ int MAIN(int argc, char **argv)
 		BIO_free(in); /* Not needed in this section */
 		pkey = load_key(bio_err, infile, informat, 1,
 			passin, e, "key");
-		if (!pkey) {
+		if (!pkey)
-			return (1);
+			{
+			BIO_free_all(out);
+			return 1;
 			}
-		if (!(p8inf = EVP_PKEY2PKCS8_broken(pkey, p8_broken))) {
+		if (!(p8inf = EVP_PKEY2PKCS8_broken(pkey, p8_broken)))
-			BIO_printf(bio_err, "Error converting key\n", outfile);
+			{
+			BIO_printf(bio_err, "Error converting key\n");
 			ERR_print_errors(bio_err);
-			return (1);
+			EVP_PKEY_free(pkey);
+			BIO_free_all(out);
+			return 1;
 			}
-		if(nocrypt) {
+		if (nocrypt)
+			{
 			if (outformat == FORMAT_PEM) 
 				PEM_write_bio_PKCS8_PRIV_KEY_INFO(out, p8inf);
 			else if (outformat == FORMAT_ASN1)
 				i2d_PKCS8_PRIV_KEY_INFO_bio(out, p8inf);
-			else {
+			else
+				{
 				BIO_printf(bio_err, "Bad format specified for key\n");
+				PKCS8_PRIV_KEY_INFO_free(p8inf);
+				EVP_PKEY_free(pkey);
+				BIO_free_all(out);
 				return (1);
 				}
-		} else {
+			}
-			if(passout) p8pass = passout;
+		else
-			else {
+			{
+			if (passout)
+				p8pass = passout;
+			else
+				{
 				p8pass = pass;
 				if (EVP_read_pw_string(pass, sizeof pass, "Enter Encryption Password:", 1))
+					{
+					PKCS8_PRIV_KEY_INFO_free(p8inf);
+					EVP_PKEY_free(pkey);
+					BIO_free_all(out);
 					return (1);
 					}
+				}
 			app_RAND_load_file(NULL, bio_err, 0);
 			if (!(p8 = PKCS8_encrypt(pbe_nid, cipher,
 					p8pass, strlen(p8pass),
-					NULL, 0, iter, p8inf))) {
+					NULL, 0, iter, p8inf)))
-				BIO_printf(bio_err, "Error encrypting key\n",
+				{
-								 outfile);
+				BIO_printf(bio_err, "Error encrypting key\n");
 				ERR_print_errors(bio_err);
+				PKCS8_PRIV_KEY_INFO_free(p8inf);
+				EVP_PKEY_free(pkey);
+				BIO_free_all(out);
 				return (1);
 				}
 			app_RAND_write_file(NULL, bio_err);
@@ -269,46 +337,61 @@ int MAIN(int argc, char **argv)
 				PEM_write_bio_PKCS8(out, p8);
 			else if (outformat == FORMAT_ASN1)
 				i2d_PKCS8_bio(out, p8);
-			else {
+			else
+				{
 				BIO_printf(bio_err, "Bad format specified for key\n");
+				PKCS8_PRIV_KEY_INFO_free(p8inf);
+				EVP_PKEY_free(pkey);
+				BIO_free_all(out);
 				return (1);
 				}
 			X509_SIG_free(p8);
 			}
+
 		PKCS8_PRIV_KEY_INFO_free (p8inf);
 		EVP_PKEY_free(pkey);
 		BIO_free_all(out);
-		if(passin) OPENSSL_free(passin);
+		if (passin)
-		if(passout) OPENSSL_free(passout);
+			OPENSSL_free(passin);
+		if (passout)
+			OPENSSL_free(passout);
 		return (0);
 		}
 
-	if(nocrypt) {
+	if (nocrypt)
+		{
 		if (informat == FORMAT_PEM) 
 			p8inf = PEM_read_bio_PKCS8_PRIV_KEY_INFO(in,NULL,NULL, NULL);
 		else if (informat == FORMAT_ASN1)
 			p8inf = d2i_PKCS8_PRIV_KEY_INFO_bio(in, NULL);
-		else {
+		else
+			{
 			BIO_printf(bio_err, "Bad format specified for key\n");
 			return (1);
 			}
-	} else {
+		}
+	else
+		{
 		if (informat == FORMAT_PEM) 
 			p8 = PEM_read_bio_PKCS8(in, NULL, NULL, NULL);
 		else if (informat == FORMAT_ASN1)
 			p8 = d2i_PKCS8_bio(in, NULL);
-		else {
+		else
+			{
 			BIO_printf(bio_err, "Bad format specified for key\n");
 			return (1);
 			}
 
-		if (!p8) {
+		if (!p8)
-			BIO_printf (bio_err, "Error reading key\n", outfile);
+			{
+			BIO_printf (bio_err, "Error reading key\n");
 			ERR_print_errors(bio_err);
 			return (1);
 			}
-		if(passin) p8pass = passin;
+		if (passin)
-		else {
+			p8pass = passin;
+		else
+			{
 			p8pass = pass;
 			EVP_read_pw_string(pass, sizeof pass, "Enter Password:", 0);
 			}
@@ -316,21 +399,25 @@ int MAIN(int argc, char **argv)
 		X509_SIG_free(p8);
 		}
 
-	if (!p8inf) {
+	if (!p8inf)
-		BIO_printf(bio_err, "Error decrypting key\n", outfile);
+		{
+		BIO_printf(bio_err, "Error decrypting key\n");
 		ERR_print_errors(bio_err);
 		return (1);
 		}
 
-	if (!(pkey = EVP_PKCS82PKEY(p8inf))) {
+	if (!(pkey = EVP_PKCS82PKEY(p8inf)))
-		BIO_printf(bio_err, "Error converting key\n", outfile);
+		{
+		BIO_printf(bio_err, "Error converting key\n");
 		ERR_print_errors(bio_err);
 		return (1);
 		}
 	
-	if (p8inf->broken) {
+	if (p8inf->broken)
+		{
 		BIO_printf(bio_err, "Warning: broken key encoding: ");
-		switch (p8inf->broken) {
+		switch (p8inf->broken)
+			{
 			case PKCS8_NO_OCTET:
 			BIO_printf(bio_err, "No Octet String in PrivateKey\n");
 			break;
@@ -354,7 +441,8 @@ int MAIN(int argc, char **argv)
 		PEM_write_bio_PrivateKey(out, pkey, NULL, NULL, 0, NULL, passout);
 	else if (outformat == FORMAT_ASN1)
 		i2d_PrivateKey_bio(out, pkey);
-	else {
+	else
+		{
 		BIO_printf(bio_err, "Bad format specified for key\n");
 			return (1);
 		}
@@ -363,8 +451,10 @@ int MAIN(int argc, char **argv)
 	EVP_PKEY_free(pkey);
 	BIO_free_all(out);
 	BIO_free(in);
-	if(passin) OPENSSL_free(passin);
+	if (passin)
-	if(passout) OPENSSL_free(passout);
+		OPENSSL_free(passin);
+	if (passout)
+		OPENSSL_free(passout);
 
 	return (0);
 	}

apps/prime.c

@@ -0,0 +1,130 @@
+/* ====================================================================
+ * Copyright (c) 2004 The OpenSSL Project.  All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer. 
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ *
+ * 3. All advertising materials mentioning features or use of this
+ *    software must display the following acknowledgment:
+ *    "This product includes software developed by the OpenSSL Project
+ *    for use in the OpenSSL Toolkit. (http://www.openssl.org/)"
+ *
+ * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
+ *    endorse or promote products derived from this software without
+ *    prior written permission. For written permission, please contact
+ *    openssl-core@openssl.org.
+ *
+ * 5. Products derived from this software may not be called "OpenSSL"
+ *    nor may "OpenSSL" appear in their names without prior written
+ *    permission of the OpenSSL Project.
+ *
+ * 6. Redistributions of any form whatsoever must retain the following
+ *    acknowledgment:
+ *    "This product includes software developed by the OpenSSL Project
+ *    for use in the OpenSSL Toolkit (http://www.openssl.org/)"
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
+ * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
+ * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE OpenSSL PROJECT OR
+ * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
+ * OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ */
+
+#include <string.h>
+
+#include "apps.h"
+#include <openssl/bn.h>
+
+
+#undef PROG
+#define PROG prime_main
+
+int MAIN(int, char **);
+
+int MAIN(int argc, char **argv)
+    {
+    int hex=0;
+    int checks=20;
+    BIGNUM *bn=NULL;
+    BIO *bio_out;
+
+    apps_startup();
+
+    if (bio_err == NULL)
+	if ((bio_err=BIO_new(BIO_s_file())) != NULL)
+	    BIO_set_fp(bio_err,stderr,BIO_NOCLOSE|BIO_FP_TEXT);
+
+    --argc;
+    ++argv;
+    while (argc >= 1 && **argv == '-')
+	{
+	if(!strcmp(*argv,"-hex"))
+	    hex=1;
+	else if(!strcmp(*argv,"-checks"))
+	    if(--argc < 1)
+		goto bad;
+	    else
+		checks=atoi(*++argv);
+	else
+	    {
+	    BIO_printf(bio_err,"Unknown option '%s'\n",*argv);
+	    goto bad;
+	    }
+	--argc;
+	++argv;
+	}
+
+    if (argv[0] == NULL)
+	{
+	BIO_printf(bio_err,"No prime specified\n");
+	goto bad;
+	}
+
+   if ((bio_out=BIO_new(BIO_s_file())) != NULL)
+	{
+	BIO_set_fp(bio_out,stdout,BIO_NOCLOSE);
+#ifdef OPENSSL_SYS_VMS
+	    {
+	    BIO *tmpbio = BIO_new(BIO_f_linebuffer());
+	    bio_out = BIO_push(tmpbio, bio_out);
+	    }
+#endif
+	}
+
+    if(hex)
+	BN_hex2bn(&bn,argv[0]);
+    else
+	BN_dec2bn(&bn,argv[0]);
+
+    BN_print(bio_out,bn);
+    BIO_printf(bio_out," is %sprime\n",
+	       BN_is_prime_ex(bn,checks,NULL,NULL) ? "" : "not ");
+
+    BN_free(bn);
+    BIO_free_all(bio_out);
+
+    return 0;
+
+    bad:
+    BIO_printf(bio_err,"options are\n");
+    BIO_printf(bio_err,"%-14s hex\n","-hex");
+    BIO_printf(bio_err,"%-14s number of checks\n","-checks <n>");
+    return 1;
+    }

apps/progs.h

@@ -17,6 +17,8 @@ extern int rsa_main(int argc,char *argv[]);
 extern int rsautl_main(int argc,char *argv[]);
 extern int dsa_main(int argc,char *argv[]);
 extern int dsaparam_main(int argc,char *argv[]);
+extern int ec_main(int argc,char *argv[]);
+extern int ecparam_main(int argc,char *argv[]);
 extern int x509_main(int argc,char *argv[]);
 extern int genrsa_main(int argc,char *argv[]);
 extern int gendsa_main(int argc,char *argv[]);
@@ -26,6 +28,7 @@ extern int speed_main(int argc,char *argv[]);
 extern int s_time_main(int argc,char *argv[]);
 extern int version_main(int argc,char *argv[]);
 extern int pkcs7_main(int argc,char *argv[]);
+extern int cms_main(int argc,char *argv[]);
 extern int crl2pkcs7_main(int argc,char *argv[]);
 extern int sess_id_main(int argc,char *argv[]);
 extern int ciphers_main(int argc,char *argv[]);
@@ -35,10 +38,9 @@ extern int pkcs8_main(int argc,char *argv[]);
 extern int spkac_main(int argc,char *argv[]);
 extern int smime_main(int argc,char *argv[]);
 extern int rand_main(int argc,char *argv[]);
-#ifndef OPENSSL_NO_ENGINE
 extern int engine_main(int argc,char *argv[]);
-#endif
 extern int ocsp_main(int argc,char *argv[]);
+extern int prime_main(int argc,char *argv[]);
 
 #define FUNC_TYPE_GENERAL	1
 #define FUNC_TYPE_MD		2
@@ -46,8 +48,8 @@ extern int ocsp_main(int argc,char *argv[]);
 
 typedef struct {
 	int type;
-	char *name;
+	const char *name;
-	int (*func)();
+	int (*func)(int argc,char *argv[]);
 	} FUNCTION;
 
 FUNCTION functions[] = {
@@ -80,6 +82,12 @@ FUNCTION functions[] = {
 #endif
 #ifndef OPENSSL_NO_DSA
 	{FUNC_TYPE_GENERAL,"dsaparam",dsaparam_main},
+#endif
+#ifndef OPENSSL_NO_EC
+	{FUNC_TYPE_GENERAL,"ec",ec_main},
+#endif
+#ifndef OPENSSL_NO_EC
+	{FUNC_TYPE_GENERAL,"ecparam",ecparam_main},
 #endif
 	{FUNC_TYPE_GENERAL,"x509",x509_main},
 #ifndef OPENSSL_NO_RSA
@@ -102,6 +110,9 @@ FUNCTION functions[] = {
 #endif
 	{FUNC_TYPE_GENERAL,"version",version_main},
 	{FUNC_TYPE_GENERAL,"pkcs7",pkcs7_main},
+#ifndef OPENSSL_NO_CMS
+	{FUNC_TYPE_GENERAL,"cms",cms_main},
+#endif
 	{FUNC_TYPE_GENERAL,"crl2pkcs7",crl2pkcs7_main},
 	{FUNC_TYPE_GENERAL,"sess_id",sess_id_main},
 #if !defined(OPENSSL_NO_SOCK) && !(defined(OPENSSL_NO_SSL2) && defined(OPENSSL_NO_SSL3))
@@ -119,6 +130,7 @@ FUNCTION functions[] = {
 	{FUNC_TYPE_GENERAL,"engine",engine_main},
 #endif
 	{FUNC_TYPE_GENERAL,"ocsp",ocsp_main},
+	{FUNC_TYPE_GENERAL,"prime",prime_main},
 #ifndef OPENSSL_NO_MD2
 	{FUNC_TYPE_MD,"md2",dgst_main},
 #endif
@@ -157,6 +169,24 @@ FUNCTION functions[] = {
 #endif
 #ifndef OPENSSL_NO_AES
 	{FUNC_TYPE_CIPHER,"aes-256-ecb",enc_main},
+#endif
+#ifndef OPENSSL_NO_CAMELLIA
+	{FUNC_TYPE_CIPHER,"camellia-128-cbc",enc_main},
+#endif
+#ifndef OPENSSL_NO_CAMELLIA
+	{FUNC_TYPE_CIPHER,"camellia-128-ecb",enc_main},
+#endif
+#ifndef OPENSSL_NO_CAMELLIA
+	{FUNC_TYPE_CIPHER,"camellia-192-cbc",enc_main},
+#endif
+#ifndef OPENSSL_NO_CAMELLIA
+	{FUNC_TYPE_CIPHER,"camellia-192-ecb",enc_main},
+#endif
+#ifndef OPENSSL_NO_CAMELLIA
+	{FUNC_TYPE_CIPHER,"camellia-256-cbc",enc_main},
+#endif
+#ifndef OPENSSL_NO_CAMELLIA
+	{FUNC_TYPE_CIPHER,"camellia-256-ecb",enc_main},
 #endif
 	{FUNC_TYPE_CIPHER,"base64",enc_main},
 #ifndef OPENSSL_NO_DES
@@ -171,6 +201,9 @@ FUNCTION functions[] = {
 #ifndef OPENSSL_NO_IDEA
 	{FUNC_TYPE_CIPHER,"idea",enc_main},
 #endif
+#ifndef OPENSSL_NO_SEED
+	{FUNC_TYPE_CIPHER,"seed",enc_main},
+#endif
 #ifndef OPENSSL_NO_RC4
 	{FUNC_TYPE_CIPHER,"rc4",enc_main},
 #endif
@@ -237,6 +270,18 @@ FUNCTION functions[] = {
 #ifndef OPENSSL_NO_IDEA
 	{FUNC_TYPE_CIPHER,"idea-ofb",enc_main},
 #endif
+#ifndef OPENSSL_NO_SEED
+	{FUNC_TYPE_CIPHER,"seed-cbc",enc_main},
+#endif
+#ifndef OPENSSL_NO_SEED
+	{FUNC_TYPE_CIPHER,"seed-ecb",enc_main},
+#endif
+#ifndef OPENSSL_NO_SEED
+	{FUNC_TYPE_CIPHER,"seed-cfb",enc_main},
+#endif
+#ifndef OPENSSL_NO_SEED
+	{FUNC_TYPE_CIPHER,"seed-ofb",enc_main},
+#endif
 #ifndef OPENSSL_NO_RC2
 	{FUNC_TYPE_CIPHER,"rc2-cbc",enc_main},
 #endif

apps/progs.pl

@@ -16,8 +16,8 @@ print <<'EOF';
 
 typedef struct {
 	int type;
-	char *name;
+	const char *name;
-	int (*func)();
+	int (*func)(int argc,char *argv[]);
 	} FUNCTION;
 
 FUNCTION functions[] = {
@@ -29,14 +29,22 @@ foreach (@ARGV)
 	$str="\t{FUNC_TYPE_GENERAL,\"$_\",${_}_main},\n";
 	if (($_ =~ /^s_/) || ($_ =~ /^ciphers$/))
 		{ print "#if !defined(OPENSSL_NO_SOCK) && !(defined(OPENSSL_NO_SSL2) && defined(OPENSSL_NO_SSL3))\n${str}#endif\n"; } 
+	elsif ( ($_ =~ /^speed$/))
+		{ print "#ifndef OPENSSL_NO_SPEED\n${str}#endif\n"; }
+	elsif ( ($_ =~ /^engine$/))
+		{ print "#ifndef OPENSSL_NO_ENGINE\n${str}#endif\n"; }
 	elsif ( ($_ =~ /^rsa$/) || ($_ =~ /^genrsa$/) || ($_ =~ /^rsautl$/)) 
 		{ print "#ifndef OPENSSL_NO_RSA\n${str}#endif\n";  }
 	elsif ( ($_ =~ /^dsa$/) || ($_ =~ /^gendsa$/) || ($_ =~ /^dsaparam$/))
 		{ print "#ifndef OPENSSL_NO_DSA\n${str}#endif\n"; }
+	elsif ( ($_ =~ /^ec$/) || ($_ =~ /^ecparam$/))
+		{ print "#ifndef OPENSSL_NO_EC\n${str}#endif\n";}
 	elsif ( ($_ =~ /^dh$/) || ($_ =~ /^gendh$/) || ($_ =~ /^dhparam$/))
 		{ print "#ifndef OPENSSL_NO_DH\n${str}#endif\n"; }
 	elsif ( ($_ =~ /^pkcs12$/))
 		{ print "#if !defined(OPENSSL_NO_DES) && !defined(OPENSSL_NO_SHA1)\n${str}#endif\n"; }
+	elsif ( ($_ =~ /^cms$/))
+		{ print "#ifndef OPENSSL_NO_CMS\n${str}#endif\n"; }
 	else
 		{ print $str; }
 	}
@@ -51,14 +59,18 @@ foreach (
 	"aes-128-cbc", "aes-128-ecb",
 	"aes-192-cbc", "aes-192-ecb",
 	"aes-256-cbc", "aes-256-ecb",
+	"camellia-128-cbc", "camellia-128-ecb",
+	"camellia-192-cbc", "camellia-192-ecb",
+	"camellia-256-cbc", "camellia-256-ecb",
 	"base64",
-	"des", "des3", "desx", "idea", "rc4", "rc4-40",
+	"des", "des3", "desx", "idea", "seed", "rc4", "rc4-40",
 	"rc2", "bf", "cast", "rc5",
 	"des-ecb", "des-ede",    "des-ede3",
 	"des-cbc", "des-ede-cbc","des-ede3-cbc",
 	"des-cfb", "des-ede-cfb","des-ede3-cfb",
 	"des-ofb", "des-ede-ofb","des-ede3-ofb",
 	"idea-cbc","idea-ecb",    "idea-cfb", "idea-ofb",
+	"seed-cbc","seed-ecb",    "seed-cfb", "seed-ofb",
 	"rc2-cbc", "rc2-ecb", "rc2-cfb","rc2-ofb", "rc2-64-cbc", "rc2-40-cbc",
 	"bf-cbc",  "bf-ecb",     "bf-cfb",   "bf-ofb",
 	"cast5-cbc","cast5-ecb", "cast5-cfb","cast5-ofb",
@@ -69,7 +81,9 @@ foreach (
 	$t=sprintf("\t{FUNC_TYPE_CIPHER,\"%s\",enc_main},\n",$_);
 	if    ($_ =~ /des/)  { $t="#ifndef OPENSSL_NO_DES\n${t}#endif\n"; }
 	elsif ($_ =~ /aes/)  { $t="#ifndef OPENSSL_NO_AES\n${t}#endif\n"; }
+	elsif ($_ =~ /camellia/)  { $t="#ifndef OPENSSL_NO_CAMELLIA\n${t}#endif\n"; }
 	elsif ($_ =~ /idea/) { $t="#ifndef OPENSSL_NO_IDEA\n${t}#endif\n"; }
+	elsif ($_ =~ /seed/) { $t="#ifndef OPENSSL_NO_SEED\n${t}#endif\n"; }
 	elsif ($_ =~ /rc4/)  { $t="#ifndef OPENSSL_NO_RC4\n${t}#endif\n"; }
 	elsif ($_ =~ /rc2/)  { $t="#ifndef OPENSSL_NO_RC2\n${t}#endif\n"; }
 	elsif ($_ =~ /bf/)   { $t="#ifndef OPENSSL_NO_BF\n${t}#endif\n"; }

apps/rand.c

@@ -205,7 +205,7 @@ int MAIN(int argc, char **argv)
 		int chunk;
 
 		chunk = num;
-		if (chunk > sizeof buf)
+		if (chunk > (int)sizeof(buf))
 			chunk = sizeof buf;
 		r = RAND_bytes(buf, chunk);
 		if (r <= 0)
@@ -213,7 +213,7 @@ int MAIN(int argc, char **argv)
 		BIO_write(out, buf, chunk);
 		num -= chunk;
 		}
-	BIO_flush(out);
+	(void)BIO_flush(out);
 
 	app_RAND_write_file(NULL, bio_err);
 	ret = 0;

apps/req.c

@@ -56,6 +56,12 @@
  * [including the GNU Public Licence.]
  */
 
+/* Until the key-gen callbacks are modified to use newer prototypes, we allow
+ * deprecated functions for openssl-internal code */
+#ifdef OPENSSL_NO_DEPRECATED
+#undef OPENSSL_NO_DEPRECATED
+#endif
+
 #include <stdio.h>
 #include <stdlib.h>
 #include <time.h>
@@ -73,7 +79,13 @@
 #include <openssl/x509v3.h>
 #include <openssl/objects.h>
 #include <openssl/pem.h>
-#include "../crypto/cryptlib.h"
+#include <openssl/bn.h>
+#ifndef OPENSSL_NO_RSA
+#include <openssl/rsa.h>
+#endif
+#ifndef OPENSSL_NO_DSA
+#include <openssl/dsa.h>
+#endif
 
 #define SECTION		"req"
 
@@ -113,9 +125,10 @@
  *		  require.  This format is wrong
  */
 
-static int make_REQ(X509_REQ *req,EVP_PKEY *pkey,char *dn,int attribs,
+static int make_REQ(X509_REQ *req,EVP_PKEY *pkey,char *dn,int mutlirdn,
-		unsigned long chtype);
+		int attribs,unsigned long chtype);
-static int build_subject(X509_REQ *req, char *subj, unsigned long chtype);
+static int build_subject(X509_REQ *req, char *subj, unsigned long chtype,
+		int multirdn);
 static int prompt_info(X509_REQ *req,
 		STACK_OF(CONF_VALUE) *dn_sk, char *dn_sect,
 		STACK_OF(CONF_VALUE) *attr_sk, char *attr_sect, int attribs,
@@ -123,16 +136,16 @@ static int prompt_info(X509_REQ *req,
 static int auto_info(X509_REQ *req, STACK_OF(CONF_VALUE) *sk,
 				STACK_OF(CONF_VALUE) *attr, int attribs,
 				unsigned long chtype);
-static int add_attribute_object(X509_REQ *req, char *text,
+static int add_attribute_object(X509_REQ *req, char *text, const char *def,
-				char *def, char *value, int nid, int n_min,
+				char *value, int nid, int n_min,
 				int n_max, unsigned long chtype);
-static int add_DN_object(X509_NAME *n, char *text, char *def, char *value,
+static int add_DN_object(X509_NAME *n, char *text, const char *def, char *value,
-	int nid,int n_min,int n_max, unsigned long chtype);
+	int nid,int n_min,int n_max, unsigned long chtype, int mval);
 #ifndef OPENSSL_NO_RSA
-static void MS_CALLBACK req_cb(int p,int n,void *arg);
+static int MS_CALLBACK req_cb(int p, int n, BN_GENCB *cb);
 #endif
 static int req_check_len(int len,int n_min,int n_max);
-static int check_end(char *str, char *end);
+static int check_end(const char *str, const char *end);
 #ifndef MONOLITH
 static char *default_config_file=NULL;
 #endif
@@ -142,6 +155,7 @@ static int batch=0;
 #define TYPE_RSA	1
 #define TYPE_DSA	2
 #define TYPE_DH		3
+#define TYPE_EC		4
 
 int MAIN(int, char **);
 
@@ -150,6 +164,9 @@ int MAIN(int argc, char **argv)
 	ENGINE *e = NULL;
 #ifndef OPENSSL_NO_DSA
 	DSA *dsa_params=NULL;
+#endif
+#ifndef OPENSSL_NO_ECDSA
+	EC_KEY *ec_params = NULL;
 #endif
 	unsigned long nmflag = 0, reqflag = 0;
 	int ex=1,x509=0,days=30;
@@ -175,7 +192,8 @@ int MAIN(int argc, char **argv)
 	char *passin = NULL, *passout = NULL;
 	char *p;
 	char *subj = NULL;
-	const EVP_MD *md_alg=NULL,*digest=EVP_md5();
+	int multirdn = 0;
+	const EVP_MD *md_alg=NULL,*digest=EVP_sha1();
 	unsigned long chtype = MBSTRING_ASC;
 #ifndef MONOLITH
 	char *to_free;
@@ -322,8 +340,61 @@ int MAIN(int argc, char **argv)
 						}
 					}
 				BIO_free(in);
-				newkey=BN_num_bits(dsa_params->p);
 				in=NULL;
+				newkey=BN_num_bits(dsa_params->p);
+				}
+			else 
+#endif
+#ifndef OPENSSL_NO_ECDSA
+				if (strncmp("ec:",p,3) == 0)
+				{
+				X509 *xtmp=NULL;
+				EVP_PKEY *dtmp;
+				EC_GROUP *group;
+
+				pkey_type=TYPE_EC;
+				p+=3;
+				if ((in=BIO_new_file(p,"r")) == NULL)
+					{
+					perror(p);
+					goto end;
+					}
+				if ((ec_params = EC_KEY_new()) == NULL)
+					goto end;
+				group = PEM_read_bio_ECPKParameters(in, NULL, NULL, NULL);
+				if (group == NULL)
+					{
+					EC_KEY_free(ec_params);
+					ERR_clear_error();
+					(void)BIO_reset(in);
+					if ((xtmp=PEM_read_bio_X509(in,NULL,NULL,NULL)) == NULL)
+						{	
+						BIO_printf(bio_err,"unable to load EC parameters from file\n");
+						goto end;
+						}
+
+					if ((dtmp=X509_get_pubkey(xtmp))==NULL)
+						goto end;
+					if (dtmp->type == EVP_PKEY_EC)
+						ec_params = EC_KEY_dup(dtmp->pkey.ec);
+					EVP_PKEY_free(dtmp);
+					X509_free(xtmp);
+					if (ec_params == NULL)
+						{
+						BIO_printf(bio_err,"Certificate does not contain EC parameters\n");
+						goto end;
+						}
+					}
+				else
+					{
+					if (EC_KEY_set_group(ec_params, group) == 0)
+						goto end;
+					EC_GROUP_free(group);
+					}
+
+				BIO_free(in);
+				in=NULL;
+				newkey = EC_GROUP_get_degree(EC_KEY_get0_group(ec_params));
 				}
 			else
 #endif
@@ -335,7 +406,9 @@ int MAIN(int argc, char **argv)
 				}
 			else
 #endif
-				pkey_type=TYPE_RSA;
+				{
+				goto bad;
+				}
 
 			newreq=1;
 			}
@@ -380,6 +453,8 @@ int MAIN(int argc, char **argv)
 			if (--argc < 1) goto bad;
 			subj= *(++argv);
 			}
+		else if (strcmp(*argv,"-multivalue-rdn") == 0)
+			multirdn=1;
 		else if (strcmp(*argv,"-days") == 0)
 			{
 			if (--argc < 1) goto bad;
@@ -445,9 +520,13 @@ bad:
 		BIO_printf(bio_err,"                the random number generator\n");
 		BIO_printf(bio_err," -newkey rsa:bits generate a new RSA key of 'bits' in size\n");
 		BIO_printf(bio_err," -newkey dsa:file generate a new DSA key, parameters taken from CA in 'file'\n");
+#ifndef OPENSSL_NO_ECDSA
+		BIO_printf(bio_err," -newkey ec:file generate a new EC key, parameters taken from CA in 'file'\n");
+#endif
 		BIO_printf(bio_err," -[digest]      Digest to sign with (md5, sha1, md2, mdc2, md4)\n");
 		BIO_printf(bio_err," -config file   request template file.\n");
 		BIO_printf(bio_err," -subj arg      set or modify request subject\n");
+		BIO_printf(bio_err," -multivalue-rdn enable support for multivalued RDNs\n");
 		BIO_printf(bio_err," -new           new request.\n");
 		BIO_printf(bio_err," -batch         do not ask anything during request generation\n");
 		BIO_printf(bio_err," -x509          output a x509 structure instead of a cert. req.\n");
@@ -499,13 +578,16 @@ bad:
 	else
 		{
 		req_conf=config;
-		if( verbose )
+
-			BIO_printf(bio_err,"Using configuration from %s\n",
-			default_config_file);
 		if (req_conf == NULL)
 			{
-			BIO_printf(bio_err,"Unable to load config info\n");
+			BIO_printf(bio_err,"Unable to load config info from %s\n", default_config_file);
+			if (newreq)
+				goto end;
 			}
+		else if( verbose )
+			BIO_printf(bio_err,"Using configuration from %s\n",
+			default_config_file);
 		}
 
 	if (req_conf != NULL)
@@ -637,7 +719,7 @@ bad:
 			   message */
 			goto end;
 			}
-		if (EVP_PKEY_type(pkey->type) == EVP_PKEY_DSA)
+		else
 			{
 			char *randfile = NCONF_get_string(req_conf,SECTION,"RANDFILE");
 			if (randfile == NULL)
@@ -648,6 +730,9 @@ bad:
 
 	if (newreq && (pkey == NULL))
 		{
+#ifndef OPENSSL_NO_RSA
+		BN_GENCB cb;
+#endif
 		char *randfile = NCONF_get_string(req_conf,SECTION,"RANDFILE");
 		if (randfile == NULL)
 			ERR_clear_error();
@@ -661,25 +746,34 @@ bad:
 				newkey=DEFAULT_KEY_LENGTH;
 			}
 
-		if (newkey < MIN_KEY_LENGTH)
+		if (newkey < MIN_KEY_LENGTH && (pkey_type == TYPE_RSA || pkey_type == TYPE_DSA))
 			{
 			BIO_printf(bio_err,"private key length is too short,\n");
-			BIO_printf(bio_err,"it needs to be at least %d bits, not %d\n",MIN_KEY_LENGTH,newkey);
+			BIO_printf(bio_err,"it needs to be at least %d bits, not %ld\n",MIN_KEY_LENGTH,newkey);
 			goto end;
 			}
-		BIO_printf(bio_err,"Generating a %d bit %s private key\n",
+		BIO_printf(bio_err,"Generating a %ld bit %s private key\n",
-			newkey,(pkey_type == TYPE_RSA)?"RSA":"DSA");
+			newkey,(pkey_type == TYPE_RSA)?"RSA":
+			(pkey_type == TYPE_DSA)?"DSA":"EC");
 
 		if ((pkey=EVP_PKEY_new()) == NULL) goto end;
 
 #ifndef OPENSSL_NO_RSA
+		BN_GENCB_set(&cb, req_cb, bio_err);
 		if (pkey_type == TYPE_RSA)
 			{
-			if (!EVP_PKEY_assign_RSA(pkey,
+			RSA *rsa = RSA_new();
-				RSA_generate_key(newkey,0x10001,
+			BIGNUM *bn = BN_new();
-					req_cb,bio_err)))
+			if(!bn || !rsa || !BN_set_word(bn, 0x10001) ||
+					!RSA_generate_key_ex(rsa, newkey, bn, &cb) ||
+					!EVP_PKEY_assign_RSA(pkey, rsa))
+				{
+				if(bn) BN_free(bn);
+				if(rsa) RSA_free(rsa);
 				goto end;
 				}
+			BN_free(bn);
+			}
 		else
 #endif
 #ifndef OPENSSL_NO_DSA
@@ -690,6 +784,15 @@ bad:
 			dsa_params=NULL;
 			}
 #endif
+#ifndef OPENSSL_NO_ECDSA
+			if (pkey_type == TYPE_EC)
+			{
+			if (!EC_KEY_generate_key(ec_params)) goto end;
+			if (!EVP_PKEY_assign_EC_KEY(pkey, ec_params)) 
+				goto end;
+			ec_params = NULL;
+			}
+#endif
 
 		app_RAND_write_file(randfile, bio_err);
 
@@ -795,6 +898,10 @@ loop:
 #ifndef OPENSSL_NO_DSA
 		if (pkey->type == EVP_PKEY_DSA)
 			digest=EVP_dss1();
+#endif
+#ifndef OPENSSL_NO_ECDSA
+		if (pkey->type == EVP_PKEY_EC)
+			digest=EVP_ecdsa();
 #endif
 		if (req == NULL)
 			{
@@ -804,7 +911,7 @@ loop:
 				goto end;
 				}
 
-			i=make_REQ(req,pkey,subj,!x509, chtype);
+			i=make_REQ(req,pkey,subj,multirdn,!x509, chtype);
 			subj=NULL; /* done processing '-subj' option */
 			if ((kludge > 0) && !sk_X509_ATTRIBUTE_num(req->req_info->attributes))
 				{
@@ -824,14 +931,16 @@ loop:
 			if ((x509ss=X509_new()) == NULL) goto end;
 
 			/* Set version to V3 */
-			if(!X509_set_version(x509ss, 2)) goto end;
+			if(extensions && !X509_set_version(x509ss, 2)) goto end;
 			if (serial)
 				{
 				if (!X509_set_serialNumber(x509ss, serial)) goto end;
 				}
 			else
 				{
-				if (!ASN1_INTEGER_set(X509_get_serialNumber(x509ss),0L)) goto end;
+				if (!rand_serial(NULL,
+					X509_get_serialNumber(x509ss)))
+						goto end;
 				}
 
 			if (!X509_set_issuer_name(x509ss, X509_REQ_get_subject_name(req))) goto end;
@@ -897,7 +1006,7 @@ loop:
 			print_name(bio_err, "old subject=", X509_REQ_get_subject_name(req), nmflag);
 			}
 
-		if (build_subject(req, subj, chtype) == 0)
+		if (build_subject(req, subj, chtype, multirdn) == 0)
 			{
 			BIO_printf(bio_err, "ERROR: cannot modify subject\n");
 			ex=1;
@@ -1080,13 +1189,16 @@ end:
 	OBJ_cleanup();
 #ifndef OPENSSL_NO_DSA
 	if (dsa_params != NULL) DSA_free(dsa_params);
+#endif
+#ifndef OPENSSL_NO_ECDSA
+	if (ec_params != NULL) EC_KEY_free(ec_params);
 #endif
 	apps_shutdown();
 	OPENSSL_EXIT(ex);
 	}
 
-static int make_REQ(X509_REQ *req, EVP_PKEY *pkey, char *subj, int attribs,
+static int make_REQ(X509_REQ *req, EVP_PKEY *pkey, char *subj, int multirdn,
-			unsigned long chtype)
+			int attribs, unsigned long chtype)
 	{
 	int ret=0,i;
 	char no_prompt = 0;
@@ -1136,7 +1248,7 @@ static int make_REQ(X509_REQ *req, EVP_PKEY *pkey, char *subj, int attribs,
 	else 
 		{
 		if (subj)
-			i = build_subject(req, subj, chtype);
+			i = build_subject(req, subj, chtype, multirdn);
 		else
 			i = prompt_info(req, dn_sk, dn_sect, attr_sk, attr_sect, attribs, chtype);
 		}
@@ -1153,11 +1265,11 @@ err:
  * subject is expected to be in the format /type0=value0/type1=value1/type2=...
  * where characters may be escaped by \
  */
-static int build_subject(X509_REQ *req, char *subject, unsigned long chtype)
+static int build_subject(X509_REQ *req, char *subject, unsigned long chtype, int multirdn)
 	{
 	X509_NAME *n;
 
-	if (!(n = do_subject(subject, chtype)))
+	if (!(n = parse_name(subject, chtype, multirdn)))
 		return 0;
 
 	if (!X509_REQ_set_subject_name(req, n))
@@ -1178,9 +1290,10 @@ static int prompt_info(X509_REQ *req,
 	int i;
 	char *p,*q;
 	char buf[100];
-	int nid;
+	int nid, mval;
 	long n_min,n_max;
-	char *type,*def,*value;
+	char *type, *value;
+	const char *def;
 	CONF_VALUE *v;
 	X509_NAME *subj;
 	subj = X509_REQ_get_subject_name(req);
@@ -1221,36 +1334,43 @@ start:		for (;;)
 					if(*p) type = p;
 					break;
 				}
+			if (*type == '+')
+				{
+				mval = -1;
+				type++;
+				}
+			else
+				mval = 0;
 			/* If OBJ not recognised ignore it */
 			if ((nid=OBJ_txt2nid(type)) == NID_undef) goto start;
-
+			if (BIO_snprintf(buf,sizeof buf,"%s_default",v->name)
-			if(strlen(v->name) > sizeof buf-9)
+				>= (int)sizeof(buf))
 			   {
 			   BIO_printf(bio_err,"Name '%s' too long\n",v->name);
 			   return 0;
 			   }
 
-			sprintf(buf,"%s_default",v->name);
 			if ((def=NCONF_get_string(req_conf,dn_sect,buf)) == NULL)
 				{
 				ERR_clear_error();
 				def="";
 				}
-			sprintf(buf,"%s_value",v->name);
+				
+			BIO_snprintf(buf,sizeof buf,"%s_value",v->name);
 			if ((value=NCONF_get_string(req_conf,dn_sect,buf)) == NULL)
 				{
 				ERR_clear_error();
 				value=NULL;
 				}
 
-			sprintf(buf,"%s_min",v->name);
+			BIO_snprintf(buf,sizeof buf,"%s_min",v->name);
 			if (!NCONF_get_number(req_conf,dn_sect,buf, &n_min))
 				{
 				ERR_clear_error();
 				n_min = -1;
 				}
 
-			sprintf(buf,"%s_max",v->name);
+			BIO_snprintf(buf,sizeof buf,"%s_max",v->name);
 			if (!NCONF_get_number(req_conf,dn_sect,buf, &n_max))
 				{
 				ERR_clear_error();
@@ -1258,7 +1378,7 @@ start:		for (;;)
 				}
 
 			if (!add_DN_object(subj,v->value,def,value,nid,
-				n_min,n_max, chtype))
+				n_min,n_max, chtype, mval))
 				return 0;
 			}
 		if (X509_NAME_entry_count(subj) == 0)
@@ -1288,13 +1408,13 @@ start2:			for (;;)
 				if ((nid=OBJ_txt2nid(type)) == NID_undef)
 					goto start2;
 
-				if(strlen(v->name) > sizeof buf-9)
+				if (BIO_snprintf(buf,sizeof buf,"%s_default",type)
+					>= (int)sizeof(buf))
 				   {
 				   BIO_printf(bio_err,"Name '%s' too long\n",v->name);
 				   return 0;
 				   }
 
-				sprintf(buf,"%s_default",type);
 				if ((def=NCONF_get_string(req_conf,attr_sect,buf))
 					== NULL)
 					{
@@ -1303,7 +1423,7 @@ start2:			for (;;)
 					}
 				
 				
-				sprintf(buf,"%s_value",type);
+				BIO_snprintf(buf,sizeof buf,"%s_value",type);
 				if ((value=NCONF_get_string(req_conf,attr_sect,buf))
 					== NULL)
 					{
@@ -1311,11 +1431,11 @@ start2:			for (;;)
 					value=NULL;
 					}
 
-				sprintf(buf,"%s_min",type);
+				BIO_snprintf(buf,sizeof buf,"%s_min",type);
 				if (!NCONF_get_number(req_conf,attr_sect,buf, &n_min))
 					n_min = -1;
 
-				sprintf(buf,"%s_max",type);
+				BIO_snprintf(buf,sizeof buf,"%s_max",type);
 				if (!NCONF_get_number(req_conf,attr_sect,buf, &n_max))
 					n_max = -1;
 
@@ -1348,6 +1468,7 @@ static int auto_info(X509_REQ *req, STACK_OF(CONF_VALUE) *dn_sk,
 
 	for (i = 0; i < sk_CONF_VALUE_num(dn_sk); i++)
 		{
+		int mval;
 		v=sk_CONF_VALUE_value(dn_sk,i);
 		p=q=NULL;
 		type=v->name;
@@ -1364,8 +1485,19 @@ static int auto_info(X509_REQ *req, STACK_OF(CONF_VALUE) *dn_sk,
 				if(*p) type = p;
 				break;
 			}
+#ifndef CHARSET_EBCDIC
+		if (*p == '+')
+#else
+		if (*p == os_toascii['+'])
+#endif
+			{
+			p++;
+			mval = -1;
+			}
+		else
+			mval = 0;
 		if (!X509_NAME_add_entry_by_txt(subj,type, chtype,
-				(unsigned char *) v->value,-1,-1,0)) return 0;
+				(unsigned char *) v->value,-1,-1,mval)) return 0;
 
 		}
 
@@ -1387,8 +1519,8 @@ static int auto_info(X509_REQ *req, STACK_OF(CONF_VALUE) *dn_sk,
 	}
 
 
-static int add_DN_object(X509_NAME *n, char *text, char *def, char *value,
+static int add_DN_object(X509_NAME *n, char *text, const char *def, char *value,
-	     int nid, int n_min, int n_max, unsigned long chtype)
+	     int nid, int n_min, int n_max, unsigned long chtype, int mval)
 	{
 	int i,ret=0;
 	MS_STATIC char buf[1024];
@@ -1397,9 +1529,8 @@ start:
 	(void)BIO_flush(bio_err);
 	if(value != NULL)
 		{
-		OPENSSL_assert(strlen(value) < sizeof buf-2);
+		BUF_strlcpy(buf,value,sizeof buf);
-		strcpy(buf,value);
+		BUF_strlcat(buf,"\n",sizeof buf);
-		strcat(buf,"\n");
 		BIO_printf(bio_err,"%s\n",value);
 		}
 	else
@@ -1421,8 +1552,8 @@ start:
 		{
 		if ((def == NULL) || (def[0] == '\0'))
 			return(1);
-		strcpy(buf,def);
+		BUF_strlcpy(buf,def,sizeof buf);
-		strcat(buf,"\n");
+		BUF_strlcat(buf,"\n",sizeof buf);
 		}
 	else if ((buf[0] == '.') && (buf[1] == '\n')) return(1);
 
@@ -1438,14 +1569,14 @@ start:
 #endif
 	if(!req_check_len(i, n_min, n_max)) goto start;
 	if (!X509_NAME_add_entry_by_NID(n,nid, chtype,
-				(unsigned char *) buf, -1,-1,0)) goto err;
+				(unsigned char *) buf, -1,-1,mval)) goto err;
 	ret=1;
 err:
 	return(ret);
 	}
 
-static int add_attribute_object(X509_REQ *req, char *text,
+static int add_attribute_object(X509_REQ *req, char *text, const char *def,
-				char *def, char *value, int nid, int n_min,
+				char *value, int nid, int n_min,
 				int n_max, unsigned long chtype)
 	{
 	int i;
@@ -1456,9 +1587,8 @@ start:
 	(void)BIO_flush(bio_err);
 	if (value != NULL)
 		{
-		OPENSSL_assert(strlen(value) < sizeof buf-2);
+		BUF_strlcpy(buf,value,sizeof buf);
-		strcpy(buf,value);
+		BUF_strlcat(buf,"\n",sizeof buf);
-		strcat(buf,"\n");
 		BIO_printf(bio_err,"%s\n",value);
 		}
 	else
@@ -1480,8 +1610,8 @@ start:
 		{
 		if ((def == NULL) || (def[0] == '\0'))
 			return(1);
-		strcpy(buf,def);
+		BUF_strlcpy(buf,def,sizeof buf);
-		strcat(buf,"\n");
+		BUF_strlcat(buf,"\n",sizeof buf);
 		}
 	else if ((buf[0] == '.') && (buf[1] == '\n')) return(1);
 
@@ -1510,7 +1640,7 @@ err:
 	}
 
 #ifndef OPENSSL_NO_RSA
-static void MS_CALLBACK req_cb(int p, int n, void *arg)
+static int MS_CALLBACK req_cb(int p, int n, BN_GENCB *cb)
 	{
 	char c='*';
 
@@ -1518,11 +1648,12 @@ static void MS_CALLBACK req_cb(int p, int n, void *arg)
 	if (p == 1) c='+';
 	if (p == 2) c='*';
 	if (p == 3) c='\n';
-	BIO_write((BIO *)arg,&c,1);
+	BIO_write(cb->arg,&c,1);
-	(void)BIO_flush((BIO *)arg);
+	(void)BIO_flush(cb->arg);
 #ifdef LINT
 	p=n;
 #endif
+	return 1;
 	}
 #endif
 
@@ -1542,10 +1673,10 @@ static int req_check_len(int len, int n_min, int n_max)
 	}
 
 /* Check if the end of a string matches 'end' */
-static int check_end(char *str, char *end)
+static int check_end(const char *str, const char *end)
 {
 	int elen, slen;	
-	char *tmp;
+	const char *tmp;
 	elen = strlen(end);
 	slen = strlen(str);
 	if(elen > slen) return 1;

apps/rsa.c

@@ -56,6 +56,7 @@
  * [including the GNU Public Licence.]
  */
 
+#include <openssl/opensslconf.h>
 #ifndef OPENSSL_NO_RSA
 #include <stdio.h>
 #include <stdlib.h>
@@ -68,6 +69,7 @@
 #include <openssl/evp.h>
 #include <openssl/x509.h>
 #include <openssl/pem.h>
+#include <openssl/bn.h>
 
 #undef PROG
 #define PROG	rsa_main
@@ -79,9 +81,13 @@
  * -des		- encrypt output if PEM format with DES in cbc mode
  * -des3	- encrypt output if PEM format
  * -idea	- encrypt output if PEM format
+ * -seed	- encrypt output if PEM format
  * -aes128	- encrypt output if PEM format
  * -aes192	- encrypt output if PEM format
  * -aes256	- encrypt output if PEM format
+ * -camellia128 - encrypt output if PEM format
+ * -camellia192 - encrypt output if PEM format
+ * -camellia256 - encrypt output if PEM format
  * -text	- print a text version
  * -modulus	- print the RSA key modulus
  * -check	- verify key consistency
@@ -206,9 +212,16 @@ bad:
 #ifndef OPENSSL_NO_IDEA
 		BIO_printf(bio_err," -idea           encrypt PEM output with cbc idea\n");
 #endif
+#ifndef OPENSSL_NO_SEED
+		BIO_printf(bio_err," -seed           encrypt PEM output with cbc seed\n");
+#endif
 #ifndef OPENSSL_NO_AES
 		BIO_printf(bio_err," -aes128, -aes192, -aes256\n");
 		BIO_printf(bio_err,"                 encrypt PEM output with cbc aes\n");
+#endif
+#ifndef OPENSSL_NO_CAMELLIA
+		BIO_printf(bio_err," -camellia128, -camellia192, -camellia256\n");
+		BIO_printf(bio_err,"                 encrypt PEM output with cbc camellia\n");
 #endif
 		BIO_printf(bio_err," -text           print the key in text\n");
 		BIO_printf(bio_err," -noout          don't print key out\n");
@@ -307,7 +320,7 @@ bad:
 			BIO_printf(out,"RSA key ok\n");
 		else if (r == 0)
 			{
-			long err;
+			unsigned long err;
 
 			while ((err = ERR_peek_error()) != 0 &&
 				ERR_GET_LIB(err) == ERR_LIB_RSA &&

apps/rsautl.c

@@ -56,12 +56,14 @@
  *
  */
 
+#include <openssl/opensslconf.h>
 #ifndef OPENSSL_NO_RSA
 
 #include "apps.h"
 #include <string.h>
 #include <openssl/err.h>
 #include <openssl/pem.h>
+#include <openssl/rsa.h>
 
 #define RSA_SIGN 	1
 #define RSA_VERIFY 	2
@@ -97,6 +99,7 @@ int MAIN(int argc, char **argv)
 	EVP_PKEY *pkey = NULL;
 	RSA *rsa = NULL;
 	unsigned char *rsa_in = NULL, *rsa_out = NULL, pad;
+	char *passargin = NULL, *passin = NULL;
 	int rsa_inlen, rsa_outlen = 0;
 	int keysize;
 
@@ -116,20 +119,35 @@ int MAIN(int argc, char **argv)
 	while(argc >= 1)
 	{
 		if (!strcmp(*argv,"-in")) {
-			if (--argc < 1) badarg = 1;
+			if (--argc < 1)
+				badarg = 1;
+			else
 				infile= *(++argv);
 		} else if (!strcmp(*argv,"-out")) {
-			if (--argc < 1) badarg = 1;
+			if (--argc < 1)
+				badarg = 1;
+			else
 				outfile= *(++argv);
 		} else if(!strcmp(*argv, "-inkey")) {
-			if (--argc < 1) badarg = 1;
+			if (--argc < 1)
+				badarg = 1;
+			else
 				keyfile = *(++argv);
+		} else if (!strcmp(*argv,"-passin")) {
+			if (--argc < 1)
+				badarg = 1;
+			else
+				passargin= *(++argv);
 		} else if (strcmp(*argv,"-keyform") == 0) {
-			if (--argc < 1) badarg = 1;
+			if (--argc < 1)
+				badarg = 1;
+			else
 				keyform=str2fmt(*(++argv));
 #ifndef OPENSSL_NO_ENGINE
 		} else if(!strcmp(*argv, "-engine")) {
-			if (--argc < 1) badarg = 1;
+			if (--argc < 1)
+				badarg = 1;
+			else
 				engine = *(++argv);
 #endif
 		} else if(!strcmp(*argv, "-pubin")) {
@@ -143,6 +161,7 @@ int MAIN(int argc, char **argv)
 		else if(!strcmp(*argv, "-oaep")) pad = RSA_PKCS1_OAEP_PADDING;
 		else if(!strcmp(*argv, "-ssl")) pad = RSA_SSLV23_PADDING;
 		else if(!strcmp(*argv, "-pkcs")) pad = RSA_PKCS1_PADDING;
+		else if(!strcmp(*argv, "-x931")) pad = RSA_X931_PADDING;
 		else if(!strcmp(*argv, "-sign")) {
 			rsa_mode = RSA_SIGN;
 			need_priv = 1;
@@ -169,6 +188,10 @@ int MAIN(int argc, char **argv)
 #ifndef OPENSSL_NO_ENGINE
         e = setup_engine(bio_err, engine, 0);
 #endif
+	if(!app_passwd(bio_err, passargin, NULL, &passin, NULL)) {
+		BIO_printf(bio_err, "Error getting password\n");
+		goto end;
+	}
 
 /* FIXME: seed PRNG only if needed */
 	app_RAND_load_file(NULL, bio_err, 0);
@@ -176,7 +199,7 @@ int MAIN(int argc, char **argv)
 	switch(key_type) {
 		case KEY_PRIVKEY:
 		pkey = load_key(bio_err, keyfile, keyform, 0,
-			NULL, e, "Private Key");
+			passin, e, "Private Key");
 		break;
 
 		case KEY_PUBKEY:
@@ -290,6 +313,7 @@ int MAIN(int argc, char **argv)
 	BIO_free_all(out);
 	if(rsa_in) OPENSSL_free(rsa_in);
 	if(rsa_out) OPENSSL_free(rsa_out);
+	if(passin) OPENSSL_free(passin);
 	return ret;
 }
 
@@ -313,6 +337,7 @@ static void usage()
 	BIO_printf(bio_err, "-hexdump        hex dump output\n");
 #ifndef OPENSSL_NO_ENGINE
 	BIO_printf(bio_err, "-engine e       use engine e, possibly a hardware device.\n");
+	BIO_printf (bio_err, "-passin arg    pass phrase source\n");
 #endif
 
 }

apps/s_apps.h

@@ -108,10 +108,19 @@
  * Hudson (tjh@cryptsoft.com).
  *
  */
-
+#if !defined(OPENSSL_SYS_NETWARE)  /* conflicts with winsock2 stuff on netware */
 #include <sys/types.h>
+#endif
 #include <openssl/opensslconf.h>
 
+#if defined(OPENSSL_SYS_WINDOWS) || defined(OPENSSL_SYS_MSDOS)
+#include <conio.h>
+#endif
+
+#ifdef OPENSSL_SYS_MSDOS
+#define _kbhit kbhit
+#endif
+
 #if defined(OPENSSL_SYS_VMS) && !defined(FD_SET)
 /* VAX C does not defined fd_set and friends, but it's actually quite simple */
 /* These definitions are borrowed from SOCKETSHR.	/Richard Levitte */
@@ -139,22 +148,26 @@ typedef fd_mask fd_set;
 #define PORT_STR        "4433"
 #define PROTOCOL        "tcp"
 
-int do_server(int port, int *ret, int (*cb) (), char *context);
+int do_server(int port, int type, int *ret, int (*cb) (char *hostname, int s, unsigned char *context), unsigned char *context);
 #ifdef HEADER_X509_H
 int MS_CALLBACK verify_callback(int ok, X509_STORE_CTX *ctx);
 #endif
 #ifdef HEADER_SSL_H
 int set_cert_stuff(SSL_CTX *ctx, char *cert_file, char *key_file);
+int set_cert_key_stuff(SSL_CTX *ctx, X509 *cert, EVP_PKEY *key);
 #endif
-int init_client(int *sock, char *server, int port);
+int init_client(int *sock, char *server, int port, int type);
 int should_retry(int i);
 int extract_port(char *str, short *port_ptr);
 int extract_host_port(char *str,char **host_ptr,unsigned char *ip,short *p);
 
-long MS_CALLBACK bio_dump_cb(BIO *bio, int cmd, const char *argp,
+long MS_CALLBACK bio_dump_callback(BIO *bio, int cmd, const char *argp,
 	int argi, long argl, long ret);
 
 #ifdef HEADER_SSL_H
 void MS_CALLBACK apps_ssl_info_callback(const SSL *s, int where, int ret);
 void MS_CALLBACK msg_cb(int write_p, int version, int content_type, const void *buf, size_t len, SSL *ssl, void *arg);
+void MS_CALLBACK tlsext_cb(SSL *s, int client_server, int type,
+					unsigned char *data, int len,
+					void *arg);
 #endif

apps/s_cb.c

@@ -229,8 +229,36 @@ int set_cert_stuff(SSL_CTX *ctx, char *cert_file, char *key_file)
 	return(1);
 	}
 
-long MS_CALLBACK bio_dump_cb(BIO *bio, int cmd, const char *argp, int argi,
+int set_cert_key_stuff(SSL_CTX *ctx, X509 *cert, EVP_PKEY *key)
-	     long argl, long ret)
+	{
+	if (cert ==  NULL)
+		return 1;
+	if (SSL_CTX_use_certificate(ctx,cert) <= 0)
+		{
+		BIO_printf(bio_err,"error setting certificate\n");
+		ERR_print_errors(bio_err);
+		return 0;
+		}
+	if (SSL_CTX_use_PrivateKey(ctx,key) <= 0)
+		{
+		BIO_printf(bio_err,"error setting private key\n");
+		ERR_print_errors(bio_err);
+		return 0;
+		}
+
+		
+		/* Now we know that a key and cert have been set against
+		 * the SSL context */
+	if (!SSL_CTX_check_private_key(ctx))
+		{
+		BIO_printf(bio_err,"Private key does not match the certificate public key\n");
+		return 0;
+		}
+	return 1;
+	}
+
+long MS_CALLBACK bio_dump_callback(BIO *bio, int cmd, const char *argp,
+	int argi, long argl, long ret)
 	{
 	BIO *out;
 
@@ -239,15 +267,15 @@ long MS_CALLBACK bio_dump_cb(BIO *bio, int cmd, const char *argp, int argi,
 
 	if (cmd == (BIO_CB_READ|BIO_CB_RETURN))
 		{
-		BIO_printf(out,"read from %08X [%08lX] (%d bytes => %ld (0x%X))\n",
+		BIO_printf(out,"read from %p [%p] (%d bytes => %ld (0x%lX))\n",
-			bio,argp,argi,ret,ret);
+ 			(void *)bio,argp,argi,ret,ret);
 		BIO_dump(out,argp,(int)ret);
 		return(ret);
 		}
 	else if (cmd == (BIO_CB_WRITE|BIO_CB_RETURN))
 		{
-		BIO_printf(out,"write to %08X [%08lX] (%d bytes => %ld (0x%X))\n",
+		BIO_printf(out,"write to %p [%p] (%d bytes => %ld (0x%lX))\n",
-			bio,argp,argi,ret,ret);
+			(void *)bio,argp,argi,ret,ret);
 		BIO_dump(out,argp,(int)ret);
 		}
 	return(ret);
@@ -255,7 +283,7 @@ long MS_CALLBACK bio_dump_cb(BIO *bio, int cmd, const char *argp, int argi,
 
 void MS_CALLBACK apps_ssl_info_callback(const SSL *s, int where, int ret)
 	{
-	char *str;
+	const char *str;
 	int w;
 
 	w=where& ~SSL_ST_MASK;
@@ -318,14 +346,14 @@ void MS_CALLBACK msg_cb(int write_p, int version, int content_type, const void *
 
 		if (len > 0)
 			{
-			switch (((unsigned char*)buf)[0])
+			switch (((const unsigned char*)buf)[0])
 				{
 				case 0:
 					str_details1 = ", ERROR:";
 					str_details2 = " ???";
 					if (len >= 3)
 						{
-						unsigned err = (((unsigned char*)buf)[1]<<8) + ((unsigned char*)buf)[2];
+						unsigned err = (((const unsigned char*)buf)[1]<<8) + ((const unsigned char*)buf)[2];
 						
 						switch (err)
 							{
@@ -394,7 +422,7 @@ void MS_CALLBACK msg_cb(int write_p, int version, int content_type, const void *
 			
 			if (len == 2)
 				{
-				switch (((unsigned char*)buf)[0])
+				switch (((const unsigned char*)buf)[0])
 					{
 				case 1:
 					str_details1 = ", warning";
@@ -405,7 +433,7 @@ void MS_CALLBACK msg_cb(int write_p, int version, int content_type, const void *
 					}
 
 				str_details2 = " ???";
-				switch (((unsigned char*)buf)[1])
+				switch (((const unsigned char*)buf)[1])
 					{
 				case 0:
 					str_details2 = " close_notify";
@@ -486,7 +514,7 @@ void MS_CALLBACK msg_cb(int write_p, int version, int content_type, const void *
 
 			if (len > 0)
 				{
-				switch (((unsigned char*)buf)[0])
+				switch (((const unsigned char*)buf)[0])
 					{
 				case 0:
 					str_details1 = ", HelloRequest";
@@ -539,11 +567,70 @@ void MS_CALLBACK msg_cb(int write_p, int version, int content_type, const void *
 			{
 			if (i % 16 == 0 && i > 0)
 				BIO_printf(bio, "\n   ");
-			BIO_printf(bio, " %02x", ((unsigned char*)buf)[i]);
+			BIO_printf(bio, " %02x", ((const unsigned char*)buf)[i]);
 			}
 		if (i < len)
 			BIO_printf(bio, " ...");
 		BIO_printf(bio, "\n");
 		}
-	BIO_flush(bio);
+	(void)BIO_flush(bio);
+	}
+
+void MS_CALLBACK tlsext_cb(SSL *s, int client_server, int type,
+					unsigned char *data, int len,
+					void *arg)
+	{
+	BIO *bio = arg;
+	char *extname;
+
+	switch(type)
+		{
+		case TLSEXT_TYPE_server_name:
+		extname = "server name";
+		break;
+
+		case TLSEXT_TYPE_max_fragment_length:
+		extname = "max fragment length";
+		break;
+
+		case TLSEXT_TYPE_client_certificate_url:
+		extname = "client certificate URL";
+		break;
+
+		case TLSEXT_TYPE_trusted_ca_keys:
+		extname = "trusted CA keys";
+		break;
+
+		case TLSEXT_TYPE_truncated_hmac:
+		extname = "truncated HMAC";
+		break;
+
+		case TLSEXT_TYPE_status_request:
+		extname = "status request";
+		break;
+
+		case TLSEXT_TYPE_elliptic_curves:
+		extname = "elliptic curves";
+		break;
+
+		case TLSEXT_TYPE_ec_point_formats:
+		extname = "EC point formats";
+		break;
+
+		case TLSEXT_TYPE_session_ticket:
+		extname = "server ticket";
+		break;
+
+
+		default:
+		extname = "unknown";
+		break;
+
+		}
+	
+	BIO_printf(bio, "TLS %s extension \"%s\" (id=%d), len=%d\n",
+			client_server ? "server": "client",
+			extname, type, len);
+	BIO_dump(bio, (char *)data, len);
+	(void)BIO_flush(bio);
 	}

apps/s_client.c

@@ -134,11 +134,9 @@ typedef unsigned int u_int;
 #include <openssl/err.h>
 #include <openssl/pem.h>
 #include <openssl/rand.h>
+#include <openssl/ocsp.h>
 #include "s_apps.h"
-
+#include "timeouts.h"
-#ifdef OPENSSL_SYS_WINDOWS
-#include <conio.h>
-#endif
 
 #ifdef OPENSSL_SYS_WINCE
 /* Windows CE incorrectly defines fileno as returning void*, so to avoid problems below... */
@@ -174,11 +172,18 @@ static int c_nbio=0;
 #endif
 static int c_Pause=0;
 static int c_debug=0;
+#ifndef OPENSSL_NO_TLSEXT
+static int c_tlsextdebug=0;
+static int c_status_req=0;
+#endif
 static int c_msg=0;
 static int c_showcerts=0;
 
 static void sc_usage(void);
 static void print_stuff(BIO *berr,SSL *con,int full);
+#ifndef OPENSSL_NO_TLSEXT
+static int ocsp_resp_cb(SSL *s, void *arg);
+#endif
 static BIO *bio_c_out=NULL;
 static int c_quiet=0;
 static int c_ign_eof=0;
@@ -191,16 +196,22 @@ static void sc_usage(void)
 	BIO_printf(bio_err," -port port     - use -connect instead\n");
 	BIO_printf(bio_err," -connect host:port - who to connect to (default is %s:%s)\n",SSL_HOST_NAME,PORT_STR);
 
-	BIO_printf(bio_err," -verify arg   - turn on peer certificate verification\n");
+	BIO_printf(bio_err," -verify depth - turn on peer certificate verification\n");
 	BIO_printf(bio_err," -cert arg     - certificate file to use, PEM format assumed\n");
-	BIO_printf(bio_err," -key arg      - Private key file to use, PEM format assumed, in cert file if\n");
+	BIO_printf(bio_err," -certform arg - certificate format (PEM or DER) PEM default\n");
+	BIO_printf(bio_err," -key arg      - Private key file to use, in cert file if\n");
 	BIO_printf(bio_err,"                 not specified but cert file is.\n");
+	BIO_printf(bio_err," -keyform arg  - key format (PEM or DER) PEM default\n");
+	BIO_printf(bio_err," -pass arg     - private key file pass phrase source\n");
 	BIO_printf(bio_err," -CApath arg   - PEM format directory of CA's\n");
 	BIO_printf(bio_err," -CAfile arg   - PEM format file of CA's\n");
 	BIO_printf(bio_err," -reconnect    - Drop and re-make the connection with the same Session-ID\n");
 	BIO_printf(bio_err," -pause        - sleep(1) after each read(2) and write(2) system call\n");
 	BIO_printf(bio_err," -showcerts    - show all certificates in the chain\n");
 	BIO_printf(bio_err," -debug        - extra output\n");
+#ifdef WATT32
+	BIO_printf(bio_err," -wdebug       - WATT-32 tcp debugging\n");
+#endif
 	BIO_printf(bio_err," -msg          - Show protocol messages\n");
 	BIO_printf(bio_err," -nbio_test    - more ssl protocol testing\n");
 	BIO_printf(bio_err," -state        - print the 'ssl' states\n");
@@ -213,6 +224,8 @@ static void sc_usage(void)
 	BIO_printf(bio_err," -ssl2         - just use SSLv2\n");
 	BIO_printf(bio_err," -ssl3         - just use SSLv3\n");
 	BIO_printf(bio_err," -tls1         - just use TLSv1\n");
+	BIO_printf(bio_err," -dtls1        - just use DTLSv1\n");    
+	BIO_printf(bio_err," -mtu          - set the MTU\n");
 	BIO_printf(bio_err," -no_tls1/-no_ssl3/-no_ssl2 - turn off that protocol\n");
 	BIO_printf(bio_err," -bugs         - Switch on all SSL implementation bug workarounds\n");
 	BIO_printf(bio_err," -serverpref   - Use server's cipher preferences (only SSLv2)\n");
@@ -221,14 +234,51 @@ static void sc_usage(void)
 	BIO_printf(bio_err," -starttls prot - use the STARTTLS command before starting TLS\n");
 	BIO_printf(bio_err,"                 for those protocols that support it, where\n");
 	BIO_printf(bio_err,"                 'prot' defines which one to assume.  Currently,\n");
-	BIO_printf(bio_err,"                 only \"smtp\" is supported.\n");
+	BIO_printf(bio_err,"                 only \"smtp\", \"pop3\", \"imap\", and \"ftp\" are supported.\n");
 #ifndef OPENSSL_NO_ENGINE
 	BIO_printf(bio_err," -engine id    - Initialise and use the specified engine\n");
 #endif
 	BIO_printf(bio_err," -rand file%cfile%c...\n", LIST_SEPARATOR_CHAR, LIST_SEPARATOR_CHAR);
-
+	BIO_printf(bio_err," -sess_out arg - file to write SSL session to\n");
+	BIO_printf(bio_err," -sess_in arg  - file to read SSL session from\n");
+#ifndef OPENSSL_NO_TLSEXT
+	BIO_printf(bio_err," -servername host  - Set TLS extension servername in ClientHello\n");
+	BIO_printf(bio_err," -tlsextdebug      - hex dump of all TLS extensions received\n");
+	BIO_printf(bio_err," -status           - request certificate status from server\n");
+	BIO_printf(bio_err," -no_ticket        - disable use of RFC4507bis session tickets\n");
+#endif
 	}
 
+#ifndef OPENSSL_NO_TLSEXT
+
+/* This is a context that we pass to callbacks */
+typedef struct tlsextctx_st {
+   BIO * biodebug;
+   int ack;
+} tlsextctx;
+
+
+static int MS_CALLBACK ssl_servername_cb(SSL *s, int *ad, void *arg)
+	{
+	tlsextctx * p = (tlsextctx *) arg;
+	const char * hn= SSL_get_servername(s, TLSEXT_NAMETYPE_host_name);
+	if (SSL_get_servername_type(s) != -1) 
+ 	        p->ack = !SSL_session_reused(s) && hn != NULL;
+	else 
+		BIO_printf(bio_err,"Can't use SSL_get_servername\n");
+	
+	return SSL_TLSEXT_ERR_OK;
+	}
+#endif
+enum
+{
+	PROTO_OFF	= 0,
+	PROTO_SMTP,
+	PROTO_POP3,
+	PROTO_IMAP,
+	PROTO_FTP
+};
+
 int MAIN(int, char **);
 
 int MAIN(int argc, char **argv)
@@ -245,25 +295,47 @@ int MAIN(int argc, char **argv)
 	int full_log=1;
 	char *host=SSL_HOST_NAME;
 	char *cert_file=NULL,*key_file=NULL;
+	int cert_format = FORMAT_PEM, key_format = FORMAT_PEM;
+	char *passarg = NULL, *pass = NULL;
+	X509 *cert = NULL;
+	EVP_PKEY *key = NULL;
 	char *CApath=NULL,*CAfile=NULL,*cipher=NULL;
 	int reconnect=0,badop=0,verify=SSL_VERIFY_NONE,bugs=0;
 	int crlf=0;
 	int write_tty,read_tty,write_ssl,read_ssl,tty_on,ssl_pending;
 	SSL_CTX *ctx=NULL;
 	int ret=1,in_init=1,i,nbio_test=0;
-	int smtp_starttls = 0;
+	int starttls_proto = PROTO_OFF;
 	int prexit = 0, vflags = 0;
 	SSL_METHOD *meth=NULL;
+#ifdef sock_type
+#undef sock_type
+#endif
+	int sock_type=SOCK_STREAM;
 	BIO *sbio;
 	char *inrand=NULL;
+	int mbuf_len=0;
 #ifndef OPENSSL_NO_ENGINE
 	char *engine_id=NULL;
-	ENGINE *e=NULL;
+	char *ssl_client_engine_id=NULL;
+	ENGINE *e=NULL, *ssl_client_engine=NULL;
 #endif
-#ifdef OPENSSL_SYS_WINDOWS
+#if defined(OPENSSL_SYS_WINDOWS) || defined(OPENSSL_SYS_MSDOS) || defined(OPENSSL_SYS_NETWARE)
 	struct timeval tv;
 #endif
 
+#ifndef OPENSSL_NO_TLSEXT
+	char *servername = NULL; 
+        tlsextctx tlsextcbp = 
+        {NULL,0};
+#endif
+	char *sess_in = NULL;
+	char *sess_out = NULL;
+	struct sockaddr peer;
+	int peerlen = sizeof(peer);
+	int enable_timeouts = 0 ;
+	long mtu = 0;
+
 #if !defined(OPENSSL_NO_SSL2) && !defined(OPENSSL_NO_SSL3)
 	meth=SSLv23_client_method();
 #elif !defined(OPENSSL_NO_SSL3)
@@ -333,6 +405,21 @@ int MAIN(int argc, char **argv)
 			if (--argc < 1) goto bad;
 			cert_file= *(++argv);
 			}
+		else if	(strcmp(*argv,"-sess_out") == 0)
+			{
+			if (--argc < 1) goto bad;
+			sess_out = *(++argv);
+			}
+		else if	(strcmp(*argv,"-sess_in") == 0)
+			{
+			if (--argc < 1) goto bad;
+			sess_in = *(++argv);
+			}
+		else if	(strcmp(*argv,"-certform") == 0)
+			{
+			if (--argc < 1) goto bad;
+			cert_format = str2fmt(*(++argv));
+			}
 		else if	(strcmp(*argv,"-crl_check") == 0)
 			vflags |= X509_V_FLAG_CRL_CHECK;
 		else if	(strcmp(*argv,"-crl_check_all") == 0)
@@ -352,6 +439,16 @@ int MAIN(int argc, char **argv)
 			c_Pause=1;
 		else if	(strcmp(*argv,"-debug") == 0)
 			c_debug=1;
+#ifndef OPENSSL_NO_TLSEXT
+		else if	(strcmp(*argv,"-tlsextdebug") == 0)
+			c_tlsextdebug=1;
+		else if	(strcmp(*argv,"-status") == 0)
+			c_status_req=1;
+#endif
+#ifdef WATT32
+		else if (strcmp(*argv,"-wdebug") == 0)
+			dbug_init();
+#endif
 		else if	(strcmp(*argv,"-msg") == 0)
 			c_msg=1;
 		else if	(strcmp(*argv,"-showcerts") == 0)
@@ -371,9 +468,33 @@ int MAIN(int argc, char **argv)
 #ifndef OPENSSL_NO_TLS1
 		else if	(strcmp(*argv,"-tls1") == 0)
 			meth=TLSv1_client_method();
+#endif
+#ifndef OPENSSL_NO_DTLS1
+		else if	(strcmp(*argv,"-dtls1") == 0)
+			{
+			meth=DTLSv1_client_method();
+			sock_type=SOCK_DGRAM;
+			}
+		else if (strcmp(*argv,"-timeout") == 0)
+			enable_timeouts=1;
+		else if (strcmp(*argv,"-mtu") == 0)
+			{
+			if (--argc < 1) goto bad;
+			mtu = atol(*(++argv));
+			}
 #endif
 		else if (strcmp(*argv,"-bugs") == 0)
 			bugs=1;
+		else if	(strcmp(*argv,"-keyform") == 0)
+			{
+			if (--argc < 1) goto bad;
+			key_format = str2fmt(*(++argv));
+			}
+		else if	(strcmp(*argv,"-pass") == 0)
+			{
+			if (--argc < 1) goto bad;
+			passarg = *(++argv);
+			}
 		else if	(strcmp(*argv,"-key") == 0)
 			{
 			if (--argc < 1) goto bad;
@@ -399,6 +520,10 @@ int MAIN(int argc, char **argv)
 			off|=SSL_OP_NO_SSLv3;
 		else if (strcmp(*argv,"-no_ssl2") == 0)
 			off|=SSL_OP_NO_SSLv2;
+#ifndef OPENSSL_NO_TLSEXT
+		else if	(strcmp(*argv,"-no_ticket") == 0)
+			{ off|=SSL_OP_NO_TICKET; }
+#endif
 		else if (strcmp(*argv,"-serverpref") == 0)
 			off|=SSL_OP_CIPHER_SERVER_PREFERENCE;
 		else if	(strcmp(*argv,"-cipher") == 0)
@@ -415,7 +540,13 @@ int MAIN(int argc, char **argv)
 			if (--argc < 1) goto bad;
 			++argv;
 			if (strcmp(*argv,"smtp") == 0)
-				smtp_starttls = 1;
+				starttls_proto = PROTO_SMTP;
+			else if (strcmp(*argv,"pop3") == 0)
+				starttls_proto = PROTO_POP3;
+			else if (strcmp(*argv,"imap") == 0)
+				starttls_proto = PROTO_IMAP;
+			else if (strcmp(*argv,"ftp") == 0)
+				starttls_proto = PROTO_FTP;
 			else
 				goto bad;
 			}
@@ -425,12 +556,25 @@ int MAIN(int argc, char **argv)
 			if (--argc < 1) goto bad;
 			engine_id = *(++argv);
 			}
+		else if	(strcmp(*argv,"-ssl_client_engine") == 0)
+			{
+			if (--argc < 1) goto bad;
+			ssl_client_engine_id = *(++argv);
+			}
 #endif
 		else if (strcmp(*argv,"-rand") == 0)
 			{
 			if (--argc < 1) goto bad;
 			inrand= *(++argv);
 			}
+#ifndef OPENSSL_NO_TLSEXT
+		else if (strcmp(*argv,"-servername") == 0)
+			{
+			if (--argc < 1) goto bad;
+			servername= *(++argv);
+			/* meth=TLSv1_client_method(); */
+			}
+#endif
 		else
 			{
 			BIO_printf(bio_err,"unknown option %s\n",*argv);
@@ -452,7 +596,53 @@ bad:
 
 #ifndef OPENSSL_NO_ENGINE
         e = setup_engine(bio_err, engine_id, 1);
+	if (ssl_client_engine_id)
+		{
+		ssl_client_engine = ENGINE_by_id(ssl_client_engine_id);
+		if (!ssl_client_engine)
+			{
+			BIO_printf(bio_err,
+					"Error getting client auth engine\n");
+			goto end;
+			}
+		}
 #endif
+	if (!app_passwd(bio_err, passarg, NULL, &pass, NULL))
+		{
+		BIO_printf(bio_err, "Error getting password\n");
+		goto end;
+		}
+
+	if (key_file == NULL)
+		key_file = cert_file;
+
+
+	if (key_file)
+
+		{
+
+		key = load_key(bio_err, key_file, key_format, 0, pass, e,
+			       "client certificate private key file");
+		if (!key)
+			{
+			ERR_print_errors(bio_err);
+			goto end;
+			}
+
+		}
+
+	if (cert_file)
+
+		{
+		cert = load_cert(bio_err,cert_file,cert_format,
+				NULL, e, "client certificate file");
+
+		if (!cert)
+			{
+			ERR_print_errors(bio_err);
+			goto end;
+			}
+		}
 
 	if (!app_RAND_load_file(NULL, bio_err, 1) && inrand == NULL
 		&& !RAND_status())
@@ -483,10 +673,28 @@ bad:
 		goto end;
 		}
 
+#ifndef OPENSSL_NO_ENGINE
+	if (ssl_client_engine)
+		{
+		if (!SSL_CTX_set_client_cert_engine(ctx, ssl_client_engine))
+			{
+			BIO_puts(bio_err, "Error setting client auth engine\n");
+			ERR_print_errors(bio_err);
+			ENGINE_free(ssl_client_engine);
+			goto end;
+			}
+		ENGINE_free(ssl_client_engine);
+		}
+#endif
+
 	if (bugs)
 		SSL_CTX_set_options(ctx,SSL_OP_ALL|off);
 	else
 		SSL_CTX_set_options(ctx,off);
+	/* DTLS: partial reads end up discarding unread UDP bytes :-( 
+	 * Setting read ahead solves this problem.
+	 */
+	if (sock_type == SOCK_DGRAM) SSL_CTX_set_read_ahead(ctx, 1);
 
 	if (state) SSL_CTX_set_info_callback(ctx,apps_ssl_info_callback);
 	if (cipher != NULL)
@@ -501,7 +709,7 @@ bad:
 #endif
 
 	SSL_CTX_set_verify(ctx,verify,verify_callback);
-	if (!set_cert_stuff(ctx,cert_file,key_file))
+	if (!set_cert_key_stuff(ctx,cert,key))
 		goto end;
 
 	if ((!SSL_CTX_load_verify_locations(ctx,CAfile,CApath)) ||
@@ -514,8 +722,51 @@ bad:
 
 	store = SSL_CTX_get_cert_store(ctx);
 	X509_STORE_set_flags(store, vflags);
+#ifndef OPENSSL_NO_TLSEXT
+	if (servername != NULL)
+		{
+		tlsextcbp.biodebug = bio_err;
+		SSL_CTX_set_tlsext_servername_callback(ctx, ssl_servername_cb);
+		SSL_CTX_set_tlsext_servername_arg(ctx, &tlsextcbp);
+		}
+#endif
 
 	con=SSL_new(ctx);
+	if (sess_in)
+		{
+		SSL_SESSION *sess;
+		BIO *stmp = BIO_new_file(sess_in, "r");
+		if (!stmp)
+			{
+			BIO_printf(bio_err, "Can't open session file %s\n",
+						sess_in);
+			ERR_print_errors(bio_err);
+			goto end;
+			}
+		sess = PEM_read_bio_SSL_SESSION(stmp, NULL, 0, NULL);
+		BIO_free(stmp);
+		if (!sess)
+			{
+			BIO_printf(bio_err, "Can't open session file %s\n",
+						sess_in);
+			ERR_print_errors(bio_err);
+			goto end;
+			}
+		SSL_set_session(con, sess);
+		SSL_SESSION_free(sess);
+		}
+#ifndef OPENSSL_NO_TLSEXT
+	if (servername != NULL)
+		{
+		if (!SSL_set_tlsext_host_name(con,servername))
+			{
+			BIO_printf(bio_err,"Unable to set TLS servername extension.\n");
+			ERR_print_errors(bio_err);
+			goto end;
+			}
+		}
+#endif
+
 #ifndef OPENSSL_NO_KRB5
 	if (con  &&  (con->kssl_ctx = kssl_ctx_new()) != NULL)
                 {
@@ -526,7 +777,7 @@ bad:
 
 re_start:
 
-	if (init_client(&s,host,port) == 0)
+	if (init_client(&s,host,port,sock_type) == 0)
 		{
 		BIO_printf(bio_err,"connect:errno=%d\n",get_last_socket_error());
 		SHUTDOWN(s);
@@ -547,8 +798,47 @@ re_start:
 		}
 #endif                                              
 	if (c_Pause & 0x01) con->debug=1;
+
+	if ( SSL_version(con) == DTLS1_VERSION)
+		{
+		struct timeval timeout;
+
+		sbio=BIO_new_dgram(s,BIO_NOCLOSE);
+		if (getsockname(s, &peer, (void *)&peerlen) < 0)
+			{
+			BIO_printf(bio_err, "getsockname:errno=%d\n",
+				get_last_socket_error());
+			SHUTDOWN(s);
+			goto end;
+			}
+
+		(void)BIO_ctrl_set_connected(sbio, 1, &peer);
+
+		if ( enable_timeouts)
+			{
+			timeout.tv_sec = 0;
+			timeout.tv_usec = DGRAM_RCV_TIMEOUT;
+			BIO_ctrl(sbio, BIO_CTRL_DGRAM_SET_RECV_TIMEOUT, 0, &timeout);
+			
+			timeout.tv_sec = 0;
+			timeout.tv_usec = DGRAM_SND_TIMEOUT;
+			BIO_ctrl(sbio, BIO_CTRL_DGRAM_SET_SEND_TIMEOUT, 0, &timeout);
+			}
+
+		if ( mtu > 0)
+			{
+			SSL_set_options(con, SSL_OP_NO_QUERY_MTU);
+			SSL_set_mtu(con, mtu);
+			}
+		else
+			/* want to do MTU discovery */
+			BIO_ctrl(sbio, BIO_CTRL_DGRAM_MTU_DISCOVER, 0, NULL);
+		}
+	else
 		sbio=BIO_new_socket(s,BIO_NOCLOSE);
 
+
+
 	if (nbio_test)
 		{
 		BIO *test;
@@ -560,14 +850,38 @@ re_start:
 	if (c_debug)
 		{
 		con->debug=1;
-		BIO_set_callback(sbio,bio_dump_cb);
+		BIO_set_callback(sbio,bio_dump_callback);
-		BIO_set_callback_arg(sbio,bio_c_out);
+		BIO_set_callback_arg(sbio,(char *)bio_c_out);
 		}
 	if (c_msg)
 		{
 		SSL_set_msg_callback(con, msg_cb);
 		SSL_set_msg_callback_arg(con, bio_c_out);
 		}
+#ifndef OPENSSL_NO_TLSEXT
+	if (c_tlsextdebug)
+		{
+		SSL_set_tlsext_debug_callback(con, tlsext_cb);
+		SSL_set_tlsext_debug_arg(con, bio_c_out);
+		}
+	if (c_status_req)
+		{
+		SSL_set_tlsext_status_type(con, TLSEXT_STATUSTYPE_ocsp);
+		SSL_CTX_set_tlsext_status_cb(ctx, ocsp_resp_cb);
+		SSL_CTX_set_tlsext_status_arg(ctx, bio_c_out);
+#if 0
+{
+STACK_OF(OCSP_RESPID) *ids = sk_OCSP_RESPID_new_null();
+OCSP_RESPID *id = OCSP_RESPID_new();
+id->value.byKey = ASN1_OCTET_STRING_new();
+id->type = V_OCSP_RESPID_KEY;
+ASN1_STRING_set(id->value.byKey, "Hello World", -1);
+sk_OCSP_RESPID_push(ids, id);
+SSL_set_tlsext_status_ids(con, ids);
+}
+#endif
+		}
+#endif
 
 	SSL_set_bio(con,sbio,sbio);
 	SSL_set_connect_state(con);
@@ -587,10 +901,91 @@ re_start:
 	sbuf_off=0;
 
 	/* This is an ugly hack that does a lot of assumptions */
-	if (smtp_starttls)
+	/* We do have to handle multi-line responses which may come
+ 	   in a single packet or not. We therefore have to use
+	   BIO_gets() which does need a buffering BIO. So during
+	   the initial chitchat we do push a buffering BIO into the
+	   chain that is removed again later on to not disturb the
+	   rest of the s_client operation. */
+	if (starttls_proto == PROTO_SMTP)
+		{
+		int foundit=0;
+		BIO *fbio = BIO_new(BIO_f_buffer());
+		BIO_push(fbio, sbio);
+		/* wait for multi-line response to end from SMTP */
+		do
+			{
+			mbuf_len = BIO_gets(fbio,mbuf,BUFSIZZ);
+			}
+		while (mbuf_len>3 && mbuf[3]=='-');
+		/* STARTTLS command requires EHLO... */
+		BIO_printf(fbio,"EHLO openssl.client.net\r\n");
+		(void)BIO_flush(fbio);
+		/* wait for multi-line response to end EHLO SMTP response */
+		do
+			{
+			mbuf_len = BIO_gets(fbio,mbuf,BUFSIZZ);
+			if (strstr(mbuf,"STARTTLS"))
+				foundit=1;
+			}
+		while (mbuf_len>3 && mbuf[3]=='-');
+		(void)BIO_flush(fbio);
+		BIO_pop(fbio);
+		BIO_free(fbio);
+		if (!foundit)
+			BIO_printf(bio_err,
+				   "didn't found starttls in server response,"
+				   " try anyway...\n");
+		BIO_printf(sbio,"STARTTLS\r\n");
+		BIO_read(sbio,sbuf,BUFSIZZ);
+		}
+	else if (starttls_proto == PROTO_POP3)
 		{
 		BIO_read(sbio,mbuf,BUFSIZZ);
-		BIO_printf(sbio,"STARTTLS\r\n");
+		BIO_printf(sbio,"STLS\r\n");
+		BIO_read(sbio,sbuf,BUFSIZZ);
+		}
+	else if (starttls_proto == PROTO_IMAP)
+		{
+		int foundit=0;
+		BIO *fbio = BIO_new(BIO_f_buffer());
+		BIO_push(fbio, sbio);
+		BIO_gets(fbio,mbuf,BUFSIZZ);
+		/* STARTTLS command requires CAPABILITY... */
+		BIO_printf(fbio,". CAPABILITY\r\n");
+		(void)BIO_flush(fbio);
+		/* wait for multi-line CAPABILITY response */
+		do
+			{
+			mbuf_len = BIO_gets(fbio,mbuf,BUFSIZZ);
+			if (strstr(mbuf,"STARTTLS"))
+				foundit=1;
+			}
+		while (mbuf_len>3 && mbuf[0]!='.');
+		(void)BIO_flush(fbio);
+		BIO_pop(fbio);
+		BIO_free(fbio);
+		if (!foundit)
+			BIO_printf(bio_err,
+				   "didn't found STARTTLS in server response,"
+				   " try anyway...\n");
+		BIO_printf(sbio,". STARTTLS\r\n");
+		BIO_read(sbio,sbuf,BUFSIZZ);
+		}
+	else if (starttls_proto == PROTO_FTP)
+		{
+		BIO *fbio = BIO_new(BIO_f_buffer());
+		BIO_push(fbio, sbio);
+		/* wait for multi-line response to end from FTP */
+		do
+			{
+			mbuf_len = BIO_gets(fbio,mbuf,BUFSIZZ);
+			}
+		while (mbuf_len>3 && mbuf[3]=='-');
+		(void)BIO_flush(fbio);
+		BIO_pop(fbio);
+		BIO_free(fbio);
+		BIO_printf(sbio,"AUTH TLS\r\n");
 		BIO_read(sbio,sbuf,BUFSIZZ);
 		}
 
@@ -610,14 +1005,25 @@ re_start:
 			if (in_init)
 				{
 				in_init=0;
+				if (sess_out)
+					{
+					BIO *stmp = BIO_new_file(sess_out, "w");
+					if (stmp)
+						{
+						PEM_write_bio_SSL_SESSION(stmp, SSL_get_session(con));
+						BIO_free(stmp);
+						}
+					else 
+						BIO_printf(bio_err, "Error writing session file %s\n", sess_out);
+					}
 				print_stuff(bio_c_out,con,full_log);
 				if (full_log > 0) full_log--;
 
-				if (smtp_starttls)
+				if (starttls_proto)
 					{
 					BIO_printf(bio_err,"%s",mbuf);
 					/* We don't need to know any more */
-					smtp_starttls = 0;
+					starttls_proto = PROTO_OFF;
 					}
 
 				if (reconnect)
@@ -636,7 +1042,7 @@ re_start:
 
 		if (!ssl_pending)
 			{
-#ifndef OPENSSL_SYS_WINDOWS
+#if !defined(OPENSSL_SYS_WINDOWS) && !defined(OPENSSL_SYS_MSDOS) && !defined(OPENSSL_SYS_NETWARE)
 			if (tty_on)
 				{
 				if (read_tty)  FD_SET(fileno(stdin),&readfds);
@@ -663,8 +1069,8 @@ re_start:
 			 * will choke the compiler: if you do have a cast then
 			 * you can either go for (int *) or (void *).
 			 */
-#ifdef OPENSSL_SYS_WINDOWS
+#if defined(OPENSSL_SYS_WINDOWS) || defined(OPENSSL_SYS_MSDOS)
-			/* Under Windows we make the assumption that we can
+                        /* Under Windows/DOS we make the assumption that we can
 			 * always write to the tty: therefore if we need to
 			 * write to the tty we just fall through. Otherwise
 			 * we timeout the select every second and see if there
@@ -678,7 +1084,7 @@ re_start:
 					tv.tv_usec = 0;
 					i=select(width,(void *)&readfds,(void *)&writefds,
 						 NULL,&tv);
-#ifdef OPENSSL_SYS_WINCE
+#if defined(OPENSSL_SYS_WINCE) || defined(OPENSSL_SYS_MSDOS)
 					if(!i && (!_kbhit() || !read_tty) ) continue;
 #else
 					if(!i && (!((_kbhit()) || (WAIT_OBJECT_0 == WaitForSingleObject(GetStdHandle(STD_INPUT_HANDLE), 0))) || !read_tty) ) continue;
@@ -686,6 +1092,16 @@ re_start:
 				} else 	i=select(width,(void *)&readfds,(void *)&writefds,
 					 NULL,NULL);
 			}
+#elif defined(OPENSSL_SYS_NETWARE)
+			if(!write_tty) {
+				if(read_tty) {
+					tv.tv_sec = 1;
+					tv.tv_usec = 0;
+					i=select(width,(void *)&readfds,(void *)&writefds,
+						NULL,&tv);
+				} else 	i=select(width,(void *)&readfds,(void *)&writefds,
+					NULL,NULL);
+			}
 #else
 			i=select(width,(void *)&readfds,(void *)&writefds,
 				 NULL,NULL);
@@ -766,7 +1182,7 @@ re_start:
 				goto shut;
 				}
 			}
-#if defined(OPENSSL_SYS_WINDOWS) || defined(OPENSSL_SYS_MSDOS)
+#if defined(OPENSSL_SYS_WINDOWS) || defined(OPENSSL_SYS_MSDOS) || defined(OPENSSL_SYS_NETWARE)
 		/* Assume Windows/DOS can always write */
 		else if (!ssl_pending && write_tty)
 #else
@@ -847,12 +1263,14 @@ printf("read=%d pending=%d peek=%d\n",k,SSL_pending(con),SSL_peek(con,zbuf,10240
 				}
 			}
 
-#ifdef OPENSSL_SYS_WINDOWS
+#if defined(OPENSSL_SYS_WINDOWS) || defined(OPENSSL_SYS_MSDOS)
-#ifdef OPENSSL_SYS_WINCE
+#if defined(OPENSSL_SYS_WINCE) || defined(OPENSSL_SYS_MSDOS)
 		else if (_kbhit())
 #else
 		else if ((_kbhit()) || (WAIT_OBJECT_0 == WaitForSingleObject(GetStdHandle(STD_INPUT_HANDLE), 0)))
 #endif
+#elif defined (OPENSSL_SYS_NETWARE)
+        else if (_kbhit())
 #else
 		else if (FD_ISSET(fileno(stdin),&readfds))
 #endif
@@ -916,6 +1334,12 @@ end:
 	if (con != NULL) SSL_free(con);
 	if (con2 != NULL) SSL_free(con2);
 	if (ctx != NULL) SSL_CTX_free(ctx);
+	if (cert)
+		X509_free(cert);
+	if (key)
+		EVP_PKEY_free(key);
+	if (pass)
+		OPENSSL_free(pass);
 	if (cbuf != NULL) { OPENSSL_cleanse(cbuf,BUFSIZZ); OPENSSL_free(cbuf); }
 	if (sbuf != NULL) { OPENSSL_cleanse(sbuf,BUFSIZZ); OPENSSL_free(sbuf); }
 	if (mbuf != NULL) { OPENSSL_cleanse(mbuf,BUFSIZZ); OPENSSL_free(mbuf); }
@@ -933,13 +1357,16 @@ static void print_stuff(BIO *bio, SSL *s, int full)
 	{
 	X509 *peer=NULL;
 	char *p;
-	static char *space="                ";
+	static const char *space="                ";
 	char buf[BUFSIZ];
 	STACK_OF(X509) *sk;
 	STACK_OF(X509_NAME) *sk2;
 	SSL_CIPHER *c;
 	X509_NAME *xn;
 	int j,i;
+#ifndef OPENSSL_NO_COMP
+	const COMP_METHOD *comp, *expansion;
+#endif
 
 	if (full)
 		{
@@ -1042,11 +1469,47 @@ static void print_stuff(BIO *bio, SSL *s, int full)
 							 EVP_PKEY_bits(pktmp));
 		EVP_PKEY_free(pktmp);
 	}
+#ifndef OPENSSL_NO_COMP
+	comp=SSL_get_current_compression(s);
+	expansion=SSL_get_current_expansion(s);
+	BIO_printf(bio,"Compression: %s\n",
+		comp ? SSL_COMP_get_name(comp) : "NONE");
+	BIO_printf(bio,"Expansion: %s\n",
+		expansion ? SSL_COMP_get_name(expansion) : "NONE");
+#endif
 	SSL_SESSION_print(bio,SSL_get_session(s));
 	BIO_printf(bio,"---\n");
 	if (peer != NULL)
 		X509_free(peer);
 	/* flush, or debugging output gets mixed with http response */
-	BIO_flush(bio);
+	(void)BIO_flush(bio);
 	}
 
+#ifndef OPENSSL_NO_TLSEXT
+
+static int ocsp_resp_cb(SSL *s, void *arg)
+	{
+	const unsigned char *p;
+	int len;
+	OCSP_RESPONSE *rsp;
+	len = SSL_get_tlsext_status_ocsp_resp(s, &p);
+	BIO_puts(arg, "OCSP response: ");
+	if (!p)
+		{
+		BIO_puts(arg, "no response sent\n");
+		return 1;
+		}
+	rsp = d2i_OCSP_RESPONSE(NULL, &p, len);
+	if (!rsp)
+		{
+		BIO_puts(arg, "response parse error\n");
+		BIO_dump_indent(arg, (char *)p, len, 4);
+		return 0;
+		}
+	BIO_puts(arg, "\n======================================\n");
+	OCSP_RESPONSE_print(arg, rsp, 0);
+	BIO_puts(arg, "======================================\n");
+	OCSP_RESPONSE_free(rsp);
+	return 1;
+	}
+#endif  /* ndef OPENSSL_NO_TLSEXT */

apps/s_socket.c

@@ -62,8 +62,6 @@
 #include <errno.h>
 #include <signal.h>
 
-#include <openssl/e_os2.h>
-
 /* With IPv6, it looks like Digital has mixed up the proper order of
    recursive header file inclusion, resulting in the compiler complaining
    that u_int isn't defined, but only if _POSIX_C_SOURCE is defined, which
@@ -81,14 +79,26 @@ typedef unsigned int u_int;
 #include "s_apps.h"
 #include <openssl/ssl.h>
 
+#ifdef FLAT_INC
+#include "e_os.h"
+#else
+#include "../e_os.h"
+#endif
+
+#ifndef OPENSSL_NO_SOCK
+
+#if defined(OPENSSL_SYS_NETWARE) && defined(NETWARE_BSDSOCK)
+#include "netdb.h"
+#endif
+
 static struct hostent *GetHostByName(char *name);
-#ifdef OPENSSL_SYS_WINDOWS
+#if defined(OPENSSL_SYS_WINDOWS) || (defined(OPENSSL_SYS_NETWARE) && !defined(NETWARE_BSDSOCK))
 static void ssl_sock_cleanup(void);
 #endif
 static int ssl_sock_init(void);
-static int init_client_ip(int *sock,unsigned char ip[4], int port);
+static int init_client_ip(int *sock,unsigned char ip[4], int port, int type);
-static int init_server(int *sock, int port);
+static int init_server(int *sock, int port, int type);
-static int init_server_long(int *sock, int port,char *ip);
+static int init_server_long(int *sock, int port,char *ip, int type);
 static int do_accept(int acc_sock, int *sock, char **host);
 static int host_ip(char *str, unsigned char ip[4]);
 
@@ -98,6 +108,10 @@ static int host_ip(char *str, unsigned char ip[4]);
 #define SOCKET_PROTOCOL	IPPROTO_TCP
 #endif
 
+#if defined(OPENSSL_SYS_NETWARE) && !defined(NETWARE_BSDSOCK)
+static int wsa_init_done=0;
+#endif
+
 #ifdef OPENSSL_SYS_WINDOWS
 static struct WSAData wsa_state;
 static int wsa_init_done=0;
@@ -146,6 +160,15 @@ static void ssl_sock_cleanup(void)
 		WSACleanup();
 		}
 	}
+#elif defined(OPENSSL_SYS_NETWARE) && !defined(NETWARE_BSDSOCK)
+static void sock_cleanup(void)
+    {
+    if (wsa_init_done)
+        {
+        wsa_init_done=0;
+		WSACleanup();
+		}
+	}
 #endif
 
 static int ssl_sock_init(void)
@@ -153,7 +176,6 @@ static int ssl_sock_init(void)
 #ifdef WATT32
 	extern int _watt_do_exit;
 	_watt_do_exit = 0;
-	dbug_init();
 	if (sock_init())
 		return (0);
 #elif defined(OPENSSL_SYS_WINDOWS)
@@ -181,11 +203,32 @@ static int ssl_sock_init(void)
 		SetWindowLong(topWnd,GWL_WNDPROC,(LONG)lpTopHookProc);
 #endif /* OPENSSL_SYS_WIN16 */
 		}
+#elif defined(OPENSSL_SYS_NETWARE) && !defined(NETWARE_BSDSOCK)
+   WORD wVerReq;
+   WSADATA wsaData;
+   int err;
+
+   if (!wsa_init_done)
+      {
+   
+# ifdef SIGINT
+      signal(SIGINT,(void (*)(int))sock_cleanup);
+# endif
+
+      wsa_init_done=1;
+      wVerReq = MAKEWORD( 2, 0 );
+      err = WSAStartup(wVerReq,&wsaData);
+      if (err != 0)
+         {
+         BIO_printf(bio_err,"unable to start WINSOCK2, error code=%d\n",err);
+         return(0);
+         }
+      }
 #endif /* OPENSSL_SYS_WINDOWS */
 	return(1);
 	}
 
-int init_client(int *sock, char *host, int port)
+int init_client(int *sock, char *host, int port, int type)
 	{
 	unsigned char ip[4];
 	short p=0;
@@ -195,10 +238,10 @@ int init_client(int *sock, char *host, int port)
 		return(0);
 		}
 	if (p != 0) port=p;
-	return(init_client_ip(sock,ip,port));
+	return(init_client_ip(sock,ip,port,type));
 	}
 
-static int init_client_ip(int *sock, unsigned char ip[4], int port)
+static int init_client_ip(int *sock, unsigned char ip[4], int port, int type)
 	{
 	unsigned long addr;
 	struct sockaddr_in them;
@@ -216,13 +259,20 @@ static int init_client_ip(int *sock, unsigned char ip[4], int port)
 		((unsigned long)ip[3]);
 	them.sin_addr.s_addr=htonl(addr);
 
+	if (type == SOCK_STREAM)
 		s=socket(AF_INET,SOCK_STREAM,SOCKET_PROTOCOL);
+	else /* ( type == SOCK_DGRAM) */
+		s=socket(AF_INET,SOCK_DGRAM,IPPROTO_UDP);
+			
 	if (s == INVALID_SOCKET) { perror("socket"); return(0); }
 
 #ifndef OPENSSL_SYS_MPE
+	if (type == SOCK_STREAM)
+		{
 		i=0;
 		i=setsockopt(s,SOL_SOCKET,SO_KEEPALIVE,(char *)&i,sizeof(i));
 		if (i < 0) { perror("keepalive"); return(0); }
+		}
 #endif
 
 	if (connect(s,(struct sockaddr *)&them,sizeof(them)) == -1)
@@ -231,14 +281,14 @@ static int init_client_ip(int *sock, unsigned char ip[4], int port)
 	return(1);
 	}
 
-int do_server(int port, int *ret, int (*cb)(), char *context)
+int do_server(int port, int type, int *ret, int (*cb)(char *hostname, int s, unsigned char *context), unsigned char *context)
 	{
 	int sock;
-	char *name;
+	char *name = NULL;
 	int accept_socket;
 	int i;
 
-	if (!init_server(&accept_socket,port)) return(0);
+	if (!init_server(&accept_socket,port,type)) return(0);
 
 	if (ret != NULL)
 		{
@@ -246,14 +296,20 @@ int do_server(int port, int *ret, int (*cb)(), char *context)
 		/* return(1);*/
 		}
   	for (;;)
+  		{
+		if (type==SOCK_STREAM)
 			{
 			if (do_accept(accept_socket,&sock,&name) == 0)
 				{
 				SHUTDOWN(accept_socket);
 				return(0);
 				}
+			}
+		else
+			sock = accept_socket;
 		i=(*cb)(name,sock, context);
 		if (name != NULL) OPENSSL_free(name);
+		if (type==SOCK_STREAM)
 			SHUTDOWN2(sock);
 		if (i < 0)
 			{
@@ -263,7 +319,7 @@ int do_server(int port, int *ret, int (*cb)(), char *context)
 		}
 	}
 
-static int init_server_long(int *sock, int port, char *ip)
+static int init_server_long(int *sock, int port, char *ip, int type)
 	{
 	int ret=0;
 	struct sockaddr_in server;
@@ -283,7 +339,11 @@ static int init_server_long(int *sock, int port, char *ip)
 #else
 		memcpy(&server.sin_addr,ip,4);
 #endif
+	
+		if (type == SOCK_STREAM)
 			s=socket(AF_INET,SOCK_STREAM,SOCKET_PROTOCOL);
+		else /* type == SOCK_DGRAM */
+			s=socket(AF_INET, SOCK_DGRAM,IPPROTO_UDP);
 
 	if (s == INVALID_SOCKET) goto err;
 #if defined SOL_SOCKET && defined SO_REUSEADDR
@@ -301,7 +361,7 @@ static int init_server_long(int *sock, int port, char *ip)
 		goto err;
 		}
 	/* Make it 128 for linux */
-	if (listen(s,128) == -1) goto err;
+	if (type==SOCK_STREAM && listen(s,128) == -1) goto err;
 	i=0;
 	*sock=s;
 	ret=1;
@@ -313,9 +373,9 @@ err:
 	return(ret);
 	}
 
-static int init_server(int *sock, int port)
+static int init_server(int *sock, int port, int type)
 	{
-	return(init_server_long(sock, port, NULL));
+	return(init_server_long(sock, port, NULL, type));
 	}
 
 static int do_accept(int acc_sock, int *sock, char **host)
@@ -342,7 +402,7 @@ redoit:
 	ret=accept(acc_sock,(struct sockaddr *)&from,(void *)&len);
 	if (ret == INVALID_SOCKET)
 		{
-#ifdef OPENSSL_SYS_WINDOWS
+#if defined(OPENSSL_SYS_WINDOWS) || (defined(OPENSSL_SYS_NETWARE) && !defined(NETWARE_BSDSOCK))
 		i=WSAGetLastError();
 		BIO_printf(bio_err,"accept error %d\n",i);
 #else
@@ -389,7 +449,7 @@ redoit:
 			perror("OPENSSL_malloc");
 			return(0);
 			}
-		strcpy(*host,h1->h_name);
+		BUF_strlcpy(*host,h1->h_name,strlen(h1->h_name)+1);
 
 		h2=GetHostByName(*host);
 		if (h2 == NULL)
@@ -553,3 +613,5 @@ static struct hostent *GetHostByName(char *name)
 		return(ret);
 		}
 	}
+
+#endif

apps/s_time.c

@@ -85,7 +85,7 @@
 #include OPENSSL_UNISTD
 #endif
 
-#if !defined(OPENSSL_SYS_MSDOS) && !defined(OPENSSL_SYS_VXWORKS) && (!defined(OPENSSL_SYS_VMS) || defined(__DECC))
+#if !defined(OPENSSL_SYS_NETWARE) && !defined(OPENSSL_SYS_MSDOS) && !defined(OPENSSL_SYS_VXWORKS) && (!defined(OPENSSL_SYS_VMS) || defined(__DECC))
 #define TIMES
 #endif
 
@@ -105,7 +105,7 @@
 #undef TIMES
 #endif
 
-#if !defined(TIMES) && !defined(OPENSSL_SYS_VXWORKS)
+#if !defined(TIMES) && !defined(OPENSSL_SYS_VXWORKS) && !defined(OPENSSL_SYS_NETWARE)
 #include <sys/timeb.h>
 #endif
 
@@ -384,6 +384,20 @@ static double tm_Time_F(int s)
 		ret=((double)(tend.tms_utime-tstart.tms_utime))/HZ;
 		return((ret == 0.0)?1e-6:ret);
 	}
+#elif defined(OPENSSL_SYS_NETWARE)
+    static clock_t tstart,tend;
+
+    if (s == START)
+    {
+        tstart=clock();
+        return(0);
+    }
+    else
+    {
+        tend=clock();
+        ret=(double)((double)(tend)-(double)(tstart));
+        return((ret < 0.001)?0.001:ret);
+    }
 #elif defined(OPENSSL_SYS_VXWORKS)
         {
 	static unsigned long tick_start, tick_end;
@@ -502,7 +516,7 @@ int MAIN(int argc, char **argv)
 
 		if (s_www_path != NULL)
 			{
-			sprintf(buf,"GET %s HTTP/1.0\r\n\r\n",s_www_path);
+			BIO_snprintf(buf,sizeof buf,"GET %s HTTP/1.0\r\n\r\n",s_www_path);
 			SSL_write(scon,buf,strlen(buf));
 			while ((i=SSL_read(scon,buf,sizeof(buf))) > 0)
 				bytes_read+=i;
@@ -557,7 +571,7 @@ next:
 
 	if (s_www_path != NULL)
 		{
-		sprintf(buf,"GET %s HTTP/1.0\r\n\r\n",s_www_path);
+		BIO_snprintf(buf,sizeof buf,"GET %s HTTP/1.0\r\n\r\n",s_www_path);
 		SSL_write(scon,buf,strlen(buf));
 		while (SSL_read(scon,buf,sizeof(buf)) > 0)
 			;
@@ -595,7 +609,7 @@ next:
 
 		if (s_www_path)
 			{
-			sprintf(buf,"GET %s HTTP/1.0\r\n\r\n",s_www_path);
+			BIO_snprintf(buf,sizeof buf,"GET %s HTTP/1.0\r\n\r\n",s_www_path);
 			SSL_write(scon,buf,strlen(buf));
 			while ((i=SSL_read(scon,buf,sizeof(buf))) > 0)
 				bytes_read+=i;

apps/sess_id.c

@@ -69,7 +69,7 @@
 #undef PROG
 #define PROG	sess_id_main
 
-static char *sess_id_usage[]={
+static const char *sess_id_usage[]={
 "usage: sess_id args\n",
 "\n",
 " -inform arg     - input format - default PEM (DER or PEM)\n",
@@ -95,7 +95,7 @@ int MAIN(int argc, char **argv)
 	int informat,outformat;
 	char *infile=NULL,*outfile=NULL,*context=NULL;
 	int cert=0,noout=0,text=0;
-	char **pp;
+	const char **pp;
 
 	apps_startup();
 
@@ -241,7 +241,7 @@ bad:
 	if (!noout && !cert)
 		{
 		if 	(outformat == FORMAT_ASN1)
-			i=(int)i2d_SSL_SESSION_bio(out,x);
+			i=i2d_SSL_SESSION_bio(out,x);
 		else if (outformat == FORMAT_PEM)
 			i=PEM_write_bio_SSL_SESSION(out,x);
 		else	{

apps/smime.c

@@ -1,9 +1,9 @@
 /* smime.c */
 /* Written by Dr Stephen N Henson (shenson@bigfoot.com) for the OpenSSL
- * project 1999.
+ * project.
  */
 /* ====================================================================
- * Copyright (c) 1999 The OpenSSL Project.  All rights reserved.
+ * Copyright (c) 1999-2004 The OpenSSL Project.  All rights reserved.
  *
  * Redistribution and use in source and binary forms, with or without
  * modification, are permitted provided that the following conditions
@@ -64,10 +64,13 @@
 #include <openssl/crypto.h>
 #include <openssl/pem.h>
 #include <openssl/err.h>
+#include <openssl/x509_vfy.h>
+#include <openssl/x509v3.h>
 
 #undef PROG
 #define PROG smime_main
 static int save_certs(char *signerfile, STACK_OF(X509) *signers);
+static int smime_cb(int ok, X509_STORE_CTX *ctx);
 
 #define SMIME_OP	0x10
 #define SMIME_ENCRYPT	(1 | SMIME_OP)
@@ -84,7 +87,7 @@ int MAIN(int argc, char **argv)
 	int operation = 0;
 	int ret = 0;
 	char **args;
-	char *inmode = "r", *outmode = "w";
+	const char *inmode = "r", *outmode = "w";
 	char *infile = NULL, *outfile = NULL;
 	char *signerfile = NULL, *recipfile = NULL;
 	char *certfile = NULL, *keyfile = NULL, *contfile=NULL;
@@ -96,7 +99,7 @@ int MAIN(int argc, char **argv)
 	STACK_OF(X509) *encerts = NULL, *other = NULL;
 	BIO *in = NULL, *out = NULL, *indata = NULL;
 	int badarg = 0;
-	int flags = PKCS7_DETACHED, store_flags = 0;
+	int flags = PKCS7_DETACHED;
 	char *to = NULL, *from = NULL, *subject = NULL;
 	char *CAfile = NULL, *CApath = NULL;
 	char *passargin = NULL, *passin = NULL;
@@ -108,30 +111,44 @@ int MAIN(int argc, char **argv)
 	char *engine=NULL;
 #endif
 
+	X509_VERIFY_PARAM *vpm = NULL;
+
 	args = argv + 1;
 	ret = 1;
 
 	apps_startup();
 
 	if (bio_err == NULL)
+		{
 		if ((bio_err = BIO_new(BIO_s_file())) != NULL)
 			BIO_set_fp(bio_err, stderr, BIO_NOCLOSE|BIO_FP_TEXT);
+		}
 
 	if (!load_config(bio_err, NULL))
 		goto end;
 
-	while (!badarg && *args && *args[0] == '-') {
+	while (!badarg && *args && *args[0] == '-')
-		if (!strcmp (*args, "-encrypt")) operation = SMIME_ENCRYPT;
+		{
-		else if (!strcmp (*args, "-decrypt")) operation = SMIME_DECRYPT;
+		if (!strcmp (*args, "-encrypt"))
-		else if (!strcmp (*args, "-sign")) operation = SMIME_SIGN;
+			operation = SMIME_ENCRYPT;
-		else if (!strcmp (*args, "-verify")) operation = SMIME_VERIFY;
+		else if (!strcmp (*args, "-decrypt"))
-		else if (!strcmp (*args, "-pk7out")) operation = SMIME_PK7OUT;
+			operation = SMIME_DECRYPT;
+		else if (!strcmp (*args, "-sign"))
+			operation = SMIME_SIGN;
+		else if (!strcmp (*args, "-verify"))
+			operation = SMIME_VERIFY;
+		else if (!strcmp (*args, "-pk7out"))
+			operation = SMIME_PK7OUT;
 #ifndef OPENSSL_NO_DES
 		else if (!strcmp (*args, "-des3")) 
 				cipher = EVP_des_ede3_cbc();
 		else if (!strcmp (*args, "-des")) 
 				cipher = EVP_des_cbc();
 #endif
+#ifndef OPENSSL_NO_SEED
+		else if (!strcmp (*args, "-seed")) 
+				cipher = EVP_seed_cbc();
+#endif
 #ifndef OPENSSL_NO_RC2
 		else if (!strcmp (*args, "-rc2-40")) 
 				cipher = EVP_rc2_40_cbc();
@@ -147,6 +164,14 @@ int MAIN(int argc, char **argv)
 				cipher = EVP_aes_192_cbc();
 		else if (!strcmp(*args,"-aes256"))
 				cipher = EVP_aes_256_cbc();
+#endif
+#ifndef OPENSSL_NO_CAMELLIA
+		else if (!strcmp(*args,"-camellia128"))
+				cipher = EVP_camellia_128_cbc();
+		else if (!strcmp(*args,"-camellia192"))
+				cipher = EVP_camellia_192_cbc();
+		else if (!strcmp(*args,"-camellia256"))
+				cipher = EVP_camellia_256_cbc();
 #endif
 		else if (!strcmp (*args, "-text")) 
 				flags |= PKCS7_TEXT;
@@ -168,127 +193,229 @@ int MAIN(int argc, char **argv)
 				flags |= PKCS7_BINARY;
 		else if (!strcmp (*args, "-nosigs"))
 				flags |= PKCS7_NOSIGS;
-		else if (!strcmp (*args, "-crl_check"))
+		else if (!strcmp (*args, "-nooldmime"))
-				store_flags |= X509_V_FLAG_CRL_CHECK;
+				flags |= PKCS7_NOOLDMIMETYPE;
-		else if (!strcmp (*args, "-crl_check_all"))
+		else if (!strcmp (*args, "-crlfeol"))
-				store_flags |= X509_V_FLAG_CRL_CHECK|X509_V_FLAG_CRL_CHECK_ALL;
+				flags |= PKCS7_CRLFEOL;
-		else if (!strcmp(*args,"-rand")) {
+		else if (!strcmp(*args,"-rand"))
-			if (args[1]) {
+			{
+			if (args[1])
+				{
 				args++;
 				inrand = *args;
-			} else badarg = 1;
+				}
+			else
+				badarg = 1;
 			need_rand = 1;
+			}
 #ifndef OPENSSL_NO_ENGINE
-		} else if (!strcmp(*args,"-engine")) {
+		else if (!strcmp(*args,"-engine"))
-			if (args[1]) {
+			{
+			if (args[1])
+				{
 				args++;
 				engine = *args;
-			} else badarg = 1;
+				}
+			else badarg = 1;
+			}
 #endif
-		} else if (!strcmp(*args,"-passin")) {
+		else if (!strcmp(*args,"-passin"))
-			if (args[1]) {
+			{
+			if (args[1])
+				{
 				args++;
 				passargin = *args;
-			} else badarg = 1;
+				}
-		} else if (!strcmp (*args, "-to")) {
+			else
-			if (args[1]) {
+				badarg = 1;
+			}
+		else if (!strcmp (*args, "-to"))
+			{
+			if (args[1])
+				{
 				args++;
 				to = *args;
-			} else badarg = 1;
+				}
-		} else if (!strcmp (*args, "-from")) {
+			else
-			if (args[1]) {
+				badarg = 1;
+			}
+		else if (!strcmp (*args, "-from"))
+			{
+			if (args[1])
+				{
 				args++;
 				from = *args;
-			} else badarg = 1;
+				}
-		} else if (!strcmp (*args, "-subject")) {
+			else badarg = 1;
-			if (args[1]) {
+			}
+		else if (!strcmp (*args, "-subject"))
+			{
+			if (args[1])
+				{
 				args++;
 				subject = *args;
-			} else badarg = 1;
+				}
-		} else if (!strcmp (*args, "-signer")) {
+			else
-			if (args[1]) {
+				badarg = 1;
+			}
+		else if (!strcmp (*args, "-signer"))
+			{
+			if (args[1])
+				{
 				args++;
 				signerfile = *args;
-			} else badarg = 1;
+				}
-		} else if (!strcmp (*args, "-recip")) {
+			else
-			if (args[1]) {
+				badarg = 1;
+			}
+		else if (!strcmp (*args, "-recip"))
+			{
+			if (args[1])
+				{
 				args++;
 				recipfile = *args;
-			} else badarg = 1;
+				}
-		} else if (!strcmp (*args, "-inkey")) {
+			else badarg = 1;
-			if (args[1]) {
+			}
+		else if (!strcmp (*args, "-inkey"))
+			{
+			if (args[1])
+				{
 				args++;
 				keyfile = *args;
-			} else badarg = 1;
+				}
-		} else if (!strcmp (*args, "-keyform")) {
+			else
-			if (args[1]) {
+				badarg = 1;
+		}
+		else if (!strcmp (*args, "-keyform"))
+			{
+			if (args[1])
+				{
 				args++;
 				keyform = str2fmt(*args);
-			} else badarg = 1;
+				}
-		} else if (!strcmp (*args, "-certfile")) {
+			else
-			if (args[1]) {
+				badarg = 1;
+			}
+		else if (!strcmp (*args, "-certfile"))
+			{
+			if (args[1])
+				{
 				args++;
 				certfile = *args;
-			} else badarg = 1;
+				}
-		} else if (!strcmp (*args, "-CAfile")) {
+			else
-			if (args[1]) {
+				badarg = 1;
+			}
+		else if (!strcmp (*args, "-CAfile"))
+			{
+			if (args[1])
+				{
 				args++;
 				CAfile = *args;
-			} else badarg = 1;
+				}
-		} else if (!strcmp (*args, "-CApath")) {
+			else
-			if (args[1]) {
+				badarg = 1;
+			}
+		else if (!strcmp (*args, "-CApath"))
+			{
+			if (args[1])
+				{
 				args++;
 				CApath = *args;
-			} else badarg = 1;
+				}
-		} else if (!strcmp (*args, "-in")) {
+			else
-			if (args[1]) {
+				badarg = 1;
+			}
+		else if (!strcmp (*args, "-in"))
+			{
+			if (args[1])
+				{
 				args++;
 				infile = *args;
-			} else badarg = 1;
+				}
-		} else if (!strcmp (*args, "-inform")) {
+			else
-			if (args[1]) {
+				badarg = 1;
+			}
+		else if (!strcmp (*args, "-inform"))
+			{
+			if (args[1])
+				{
 				args++;
 				informat = str2fmt(*args);
-			} else badarg = 1;
+				}
-		} else if (!strcmp (*args, "-outform")) {
+			else
-			if (args[1]) {
+				badarg = 1;
+			}
+		else if (!strcmp (*args, "-outform"))
+			{
+			if (args[1])
+				{
 				args++;
 				outformat = str2fmt(*args);
-			} else badarg = 1;
+				}
-		} else if (!strcmp (*args, "-out")) {
+			else
-			if (args[1]) {
+				badarg = 1;
+			}
+		else if (!strcmp (*args, "-out"))
+			{
+			if (args[1])
+				{
 				args++;
 				outfile = *args;
-			} else badarg = 1;
+				}
-		} else if (!strcmp (*args, "-content")) {
+			else
-			if (args[1]) {
+				badarg = 1;
+			}
+		else if (!strcmp (*args, "-content"))
+			{
+			if (args[1])
+				{
 				args++;
 				contfile = *args;
-			} else badarg = 1;
+				}
-		} else badarg = 1;
+			else
+				badarg = 1;
+			}
+		else if (args_verify(&args, NULL, &badarg, bio_err, &vpm))
+			continue;
+		else
+			badarg = 1;
 		args++;
 		}
 
-	if(operation == SMIME_SIGN) {
+
-		if(!signerfile) {
+	if (operation == SMIME_SIGN)
+		{
+		if (!signerfile)
+			{
 			BIO_printf(bio_err, "No signer certificate specified\n");
 			badarg = 1;
 			}
 		need_rand = 1;
-	} else if(operation == SMIME_DECRYPT) {
+		}
-		if(!recipfile) {
+	else if (operation == SMIME_DECRYPT)
-			BIO_printf(bio_err, "No recipient certificate and key specified\n");
+		{
+		if (!recipfile && !keyfile)
+			{
+			BIO_printf(bio_err, "No recipient certificate or key specified\n");
 			badarg = 1;
 			}
-	} else if(operation == SMIME_ENCRYPT) {
+		}
-		if(!*args) {
+	else if (operation == SMIME_ENCRYPT)
+		{
+		if (!*args)
+			{
 			BIO_printf(bio_err, "No recipient(s) certificate(s) specified\n");
 			badarg = 1;
 			}
 		need_rand = 1;
-	} else if(!operation) badarg = 1;
+		}
+	else if (!operation)
+		badarg = 1;
 
-	if (badarg) {
+	if (badarg)
+		{
 		BIO_printf (bio_err, "Usage smime [options] cert.pem ...\n");
 		BIO_printf (bio_err, "where options are\n");
 		BIO_printf (bio_err, "-encrypt       encrypt message\n");
@@ -300,6 +427,9 @@ int MAIN(int argc, char **argv)
 		BIO_printf (bio_err, "-des3          encrypt with triple DES\n");
 		BIO_printf (bio_err, "-des           encrypt with DES\n");
 #endif
+#ifndef OPENSSL_NO_SEED
+		BIO_printf (bio_err, "-seed          encrypt with SEED\n");
+#endif
 #ifndef OPENSSL_NO_RC2
 		BIO_printf (bio_err, "-rc2-40        encrypt with RC2-40 (default)\n");
 		BIO_printf (bio_err, "-rc2-64        encrypt with RC2-64\n");
@@ -308,6 +438,10 @@ int MAIN(int argc, char **argv)
 #ifndef OPENSSL_NO_AES
 		BIO_printf (bio_err, "-aes128, -aes192, -aes256\n");
 		BIO_printf (bio_err, "               encrypt PEM output with cbc aes\n");
+#endif
+#ifndef OPENSSL_NO_CAMELLIA
+		BIO_printf (bio_err, "-camellia128, -camellia192, -camellia256\n");
+		BIO_printf (bio_err, "               encrypt PEM output with cbc camellia\n");
 #endif
 		BIO_printf (bio_err, "-nointern      don't search certificates in message for signer\n");
 		BIO_printf (bio_err, "-nosigs        don't verify message signature\n");
@@ -349,12 +483,14 @@ int MAIN(int argc, char **argv)
         e = setup_engine(bio_err, engine, 0);
 #endif
 
-	if(!app_passwd(bio_err, passargin, NULL, &passin, NULL)) {
+	if (!app_passwd(bio_err, passargin, NULL, &passin, NULL))
+		{
 		BIO_printf(bio_err, "Error getting password\n");
 		goto end;
 		}
 
-	if (need_rand) {
+	if (need_rand)
+		{
 		app_RAND_load_file(NULL, bio_err, (inrand != NULL));
 		if (inrand != NULL)
 			BIO_printf(bio_err,"%ld semi-random bytes loaded\n",
@@ -363,18 +499,28 @@ int MAIN(int argc, char **argv)
 
 	ret = 2;
 
-	if(operation != SMIME_SIGN) flags &= ~PKCS7_DETACHED;
+	if (operation != SMIME_SIGN)
+		flags &= ~PKCS7_DETACHED;
 
-	if(operation & SMIME_OP) {
+	if (operation & SMIME_OP)
-		if(flags & PKCS7_BINARY) inmode = "rb";
+		{
-		if(outformat == FORMAT_ASN1) outmode = "wb";
+		if (flags & PKCS7_BINARY)
-	} else {
+			inmode = "rb";
-		if(flags & PKCS7_BINARY) outmode = "wb";
+		if (outformat == FORMAT_ASN1)
-		if(informat == FORMAT_ASN1) inmode = "rb";
+			outmode = "wb";
+		}
+	else
+		{
+		if (flags & PKCS7_BINARY)
+			outmode = "wb";
+		if (informat == FORMAT_ASN1)
+			inmode = "rb";
 		}
 
-	if(operation == SMIME_ENCRYPT) {
+	if (operation == SMIME_ENCRYPT)
-		if (!cipher) {
+		{
+		if (!cipher)
+			{
 #ifndef OPENSSL_NO_RC2			
 			cipher = EVP_rc2_40_cbc();
 #else
@@ -383,9 +529,11 @@ int MAIN(int argc, char **argv)
 #endif
 			}
 		encerts = sk_X509_new_null();
-		while (*args) {
+		while (*args)
+			{
 			if (!(cert = load_cert(bio_err,*args,FORMAT_PEM,
-				NULL, e, "recipient certificate file"))) {
+				NULL, e, "recipient certificate file")))
+				{
 #if 0				/* An appropriate message is already printed */
 				BIO_printf(bio_err, "Can't read recipient certificate file %s\n", *args);
 #endif
@@ -397,9 +545,11 @@ int MAIN(int argc, char **argv)
 			}
 		}
 
-	if(signerfile && (operation == SMIME_SIGN)) {
+	if (signerfile && (operation == SMIME_SIGN))
+		{
 		if (!(signer = load_cert(bio_err,signerfile,FORMAT_PEM, NULL,
-			e, "signer certificate"))) {
+			e, "signer certificate")))
+			{
 #if 0			/* An appropri message has already been printed */
 			BIO_printf(bio_err, "Can't read signer certificate file %s\n", signerfile);
 #endif
@@ -407,9 +557,11 @@ int MAIN(int argc, char **argv)
 			}
 		}
 
-	if(certfile) {
+	if (certfile)
+		{
 		if (!(other = load_certs(bio_err,certfile,FORMAT_PEM, NULL,
-			e, "certificate file"))) {
+			e, "certificate file")))
+			{
 #if 0			/* An appropriate message has already been printed */
 			BIO_printf(bio_err, "Can't read certificate file %s\n", certfile);
 #endif
@@ -418,9 +570,11 @@ int MAIN(int argc, char **argv)
 			}
 		}
 
-	if(recipfile && (operation == SMIME_DECRYPT)) {
+	if (recipfile && (operation == SMIME_DECRYPT))
+		{
 		if (!(recip = load_cert(bio_err,recipfile,FORMAT_PEM,NULL,
-			e, "recipient certificate file"))) {
+			e, "recipient certificate file")))
+			{
 #if 0			/* An appropriate message has alrady been printed */
 			BIO_printf(bio_err, "Can't read recipient certificate file %s\n", recipfile);
 #endif
@@ -429,35 +583,49 @@ int MAIN(int argc, char **argv)
 			}
 		}
 
-	if(operation == SMIME_DECRYPT) {
+	if (operation == SMIME_DECRYPT)
-		if(!keyfile) keyfile = recipfile;
+		{
-	} else if(operation == SMIME_SIGN) {
+		if (!keyfile)
-		if(!keyfile) keyfile = signerfile;
+			keyfile = recipfile;
-	} else keyfile = NULL;
+		}
+	else if (operation == SMIME_SIGN)
+		{
+		if (!keyfile)
+			keyfile = signerfile;
+		}
+	else keyfile = NULL;
 
-	if(keyfile) {
+	if (keyfile)
+		{
 		key = load_key(bio_err, keyfile, keyform, 0, passin, e,
 			       "signing key file");
-		if (!key) {
+		if (!key)
 			goto end;
 		}
-	}
 
-	if (infile) {
+	if (infile)
-		if (!(in = BIO_new_file(infile, inmode))) {
+		{
+		if (!(in = BIO_new_file(infile, inmode)))
+			{
 			BIO_printf (bio_err,
 				 "Can't open input file %s\n", infile);
 			goto end;
 			}
-	} else in = BIO_new_fp(stdin, BIO_NOCLOSE);
+		}
+	else
+		in = BIO_new_fp(stdin, BIO_NOCLOSE);
 
-	if (outfile) {
+	if (outfile)
-		if (!(out = BIO_new_file(outfile, outmode))) {
+		{
+		if (!(out = BIO_new_file(outfile, outmode)))
+			{
 			BIO_printf (bio_err,
 				 "Can't open output file %s\n", outfile);
 			goto end;
 			}
-	} else {
+		}
+	else
+		{
 		out = BIO_new_fp(stdout, BIO_NOCLOSE);
 #ifdef OPENSSL_SYS_VMS
 		{
@@ -467,87 +635,112 @@ int MAIN(int argc, char **argv)
 #endif
 		}
 
-	if(operation == SMIME_VERIFY) {
+	if (operation == SMIME_VERIFY)
-		if(!(store = setup_verify(bio_err, CAfile, CApath))) goto end;
+		{
-		X509_STORE_set_flags(store, store_flags);
+		if (!(store = setup_verify(bio_err, CAfile, CApath)))
+			goto end;
+		X509_STORE_set_verify_cb_func(store, smime_cb);
+		if (vpm)
+			X509_STORE_set1_param(store, vpm);
 		}
 
 
 	ret = 3;
 
-	if(operation == SMIME_ENCRYPT) {
+	if (operation == SMIME_ENCRYPT)
 		p7 = PKCS7_encrypt(encerts, in, cipher, flags);
-	} else if(operation == SMIME_SIGN) {
+	else if (operation == SMIME_SIGN)
+		{
+		/* If detached data and SMIME output enable partial
+		 * signing.
+		 */
+		if ((flags & PKCS7_DETACHED) && (outformat == FORMAT_SMIME))
+			flags |= PKCS7_STREAM;
 		p7 = PKCS7_sign(signer, key, other, in, flags);
-		if (BIO_reset(in) != 0 && (flags & PKCS7_DETACHED)) {
-		  BIO_printf(bio_err, "Can't rewind input file\n");
-		  goto end;
 		}
-	} else {
+	else
+		{
 		if (informat == FORMAT_SMIME) 
 			p7 = SMIME_read_PKCS7(in, &indata);
 		else if (informat == FORMAT_PEM) 
 			p7 = PEM_read_bio_PKCS7(in, NULL, NULL, NULL);
 		else if (informat == FORMAT_ASN1) 
 			p7 = d2i_PKCS7_bio(in, NULL);
-		else {
+		else
+			{
 			BIO_printf(bio_err, "Bad input format for PKCS#7 file\n");
 			goto end;
 			}
 
-		if(!p7) {
+		if (!p7)
+			{
 			BIO_printf(bio_err, "Error reading S/MIME message\n");
 			goto end;
 			}
-		if(contfile) {
+		if (contfile)
+			{
 			BIO_free(indata);
-			if(!(indata = BIO_new_file(contfile, "rb"))) {
+			if (!(indata = BIO_new_file(contfile, "rb")))
+				{
 				BIO_printf(bio_err, "Can't read content file %s\n", contfile);
 				goto end;
 				}
 			}
 		}
 
-	if(!p7) {
+	if (!p7)
+		{
 		BIO_printf(bio_err, "Error creating PKCS#7 structure\n");
 		goto end;
 		}
 
 	ret = 4;
-	if(operation == SMIME_DECRYPT) {
+	if (operation == SMIME_DECRYPT)
-		if(!PKCS7_decrypt(p7, key, recip, out, flags)) {
+		{
+		if (!PKCS7_decrypt(p7, key, recip, out, flags))
+			{
 			BIO_printf(bio_err, "Error decrypting PKCS#7 structure\n");
 			goto end;
 			}
-	} else if(operation == SMIME_VERIFY) {
+		}
+	else if (operation == SMIME_VERIFY)
+		{
 		STACK_OF(X509) *signers;
-		if(PKCS7_verify(p7, other, store, indata, out, flags)) {
+		if (PKCS7_verify(p7, other, store, indata, out, flags))
 			BIO_printf(bio_err, "Verification successful\n");
-		} else {
+		else
+			{
 			BIO_printf(bio_err, "Verification failure\n");
 			goto end;
 			}
 		signers = PKCS7_get0_signers(p7, other, flags);
-		if(!save_certs(signerfile, signers)) {
+		if (!save_certs(signerfile, signers))
+			{
 			BIO_printf(bio_err, "Error writing signers to %s\n",
 								signerfile);
 			ret = 5;
 			goto end;
 			}
 		sk_X509_free(signers);
-	} else if(operation == SMIME_PK7OUT) {
+		}
+	else if (operation == SMIME_PK7OUT)
 		PEM_write_bio_PKCS7(out, p7);
-	} else {
+	else
-		if(to) BIO_printf(out, "To: %s\n", to);
+		{
-		if(from) BIO_printf(out, "From: %s\n", from);
+		if (to)
-		if(subject) BIO_printf(out, "Subject: %s\n", subject);
+			BIO_printf(out, "To: %s\n", to);
+		if (from)
+			BIO_printf(out, "From: %s\n", from);
+		if (subject)
+			BIO_printf(out, "Subject: %s\n", subject);
 		if (outformat == FORMAT_SMIME) 
 			SMIME_write_PKCS7(out, p7, in, flags);
 		else if (outformat == FORMAT_PEM) 
 			PEM_write_bio_PKCS7(out,p7);
 		else if (outformat == FORMAT_ASN1) 
 			i2d_PKCS7_bio(out,p7);
-		else {
+		else
+			{
 			BIO_printf(bio_err, "Bad output format for PKCS#7 file\n");
 			goto end;
 			}
@@ -559,6 +752,8 @@ end:
 	if (ret) ERR_print_errors(bio_err);
 	sk_X509_pop_free(encerts, X509_free);
 	sk_X509_pop_free(other, X509_free);
+	if (vpm)
+		X509_VERIFY_PARAM_free(vpm);
 	X509_STORE_free(store);
 	X509_free(cert);
 	X509_free(recip);
@@ -576,7 +771,8 @@ static int save_certs(char *signerfile, STACK_OF(X509) *signers)
 	{
 	int i;
 	BIO *tmp;
-	if(!signerfile) return 1;
+	if (!signerfile)
+		return 1;
 	tmp = BIO_new_file(signerfile, "w");
 	if (!tmp) return 0;
 	for(i = 0; i < sk_X509_num(signers); i++)
@@ -585,3 +781,21 @@ static int save_certs(char *signerfile, STACK_OF(X509) *signers)
 	return 1;
 	}
 	
+
+/* Minimal callback just to output policy info (if any) */
+
+static int smime_cb(int ok, X509_STORE_CTX *ctx)
+	{
+	int error;
+
+	error = X509_STORE_CTX_get_error(ctx);
+
+	if ((error != X509_V_ERR_NO_EXPLICIT_POLICY)
+		&& ((error != X509_V_OK) || (ok != 2)))
+		return ok;
+
+	policies_print(NULL, ctx);
+
+	return ok;
+
+	}

apps/spkac.c

@@ -87,7 +87,8 @@ int MAIN(int argc, char **argv)
 	int verify=0,noout=0,pubkey=0;
 	char *infile = NULL,*outfile = NULL,*prog;
 	char *passargin = NULL, *passin = NULL;
-	char *spkac = "SPKAC", *spksect = "default", *spkstr = NULL;
+	const char *spkac = "SPKAC", *spksect = "default";
+	char *spkstr = NULL;
 	char *challenge = NULL, *keyfile = NULL;
 	CONF *conf = NULL;
 	NETSCAPE_SPKI *spki = NULL;
@@ -200,7 +201,7 @@ bad:
 		}
 		spki = NETSCAPE_SPKI_new();
 		if(challenge) ASN1_STRING_set(spki->spkac->challenge,
-						 challenge, strlen(challenge));
+						 challenge, (int)strlen(challenge));
 		NETSCAPE_SPKI_set_pubkey(spki, pkey);
 		NETSCAPE_SPKI_sign(spki, pkey, EVP_md5());
 		spkstr = NETSCAPE_SPKI_b64_encode(spki);

apps/timeouts.h

@@ -0,0 +1,67 @@
+/* apps/timeouts.h */
+/* 
+ * DTLS implementation written by Nagendra Modadugu
+ * (nagendra@cs.stanford.edu) for the OpenSSL project 2005.  
+ */
+/* ====================================================================
+ * Copyright (c) 1999-2005 The OpenSSL Project.  All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer. 
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ *
+ * 3. All advertising materials mentioning features or use of this
+ *    software must display the following acknowledgment:
+ *    "This product includes software developed by the OpenSSL Project
+ *    for use in the OpenSSL Toolkit. (http://www.OpenSSL.org/)"
+ *
+ * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
+ *    endorse or promote products derived from this software without
+ *    prior written permission. For written permission, please contact
+ *    openssl-core@OpenSSL.org.
+ *
+ * 5. Products derived from this software may not be called "OpenSSL"
+ *    nor may "OpenSSL" appear in their names without prior written
+ *    permission of the OpenSSL Project.
+ *
+ * 6. Redistributions of any form whatsoever must retain the following
+ *    acknowledgment:
+ *    "This product includes software developed by the OpenSSL Project
+ *    for use in the OpenSSL Toolkit (http://www.OpenSSL.org/)"
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
+ * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
+ * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE OpenSSL PROJECT OR
+ * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
+ * OF THE POSSIBILITY OF SUCH DAMAGE.
+ * ====================================================================
+ *
+ * This product includes cryptographic software written by Eric Young
+ * (eay@cryptsoft.com).  This product includes software written by Tim
+ * Hudson (tjh@cryptsoft.com).
+ *
+ */
+
+#ifndef INCLUDED_TIMEOUTS_H
+#define INCLUDED_TIMEOUTS_H
+
+/* numbers in us */
+#define DGRAM_RCV_TIMEOUT         250000
+#define DGRAM_SND_TIMEOUT         250000
+
+#endif /* ! INCLUDED_TIMEOUTS_H */

apps/verify.c

@@ -79,13 +79,14 @@ int MAIN(int, char **);
 int MAIN(int argc, char **argv)
 	{
 	ENGINE *e = NULL;
-	int i,ret=1;
+	int i,ret=1, badarg = 0;
 	int purpose = -1;
 	char *CApath=NULL,*CAfile=NULL;
 	char *untfile = NULL, *trustfile = NULL;
 	STACK_OF(X509) *untrusted = NULL, *trusted = NULL;
 	X509_STORE *cert_ctx=NULL;
 	X509_LOOKUP *lookup=NULL;
+	X509_VERIFY_PARAM *vpm = NULL;
 #ifndef OPENSSL_NO_ENGINE
 	char *engine=NULL;
 #endif
@@ -121,18 +122,12 @@ int MAIN(int argc, char **argv)
 				if (argc-- < 1) goto end;
 				CAfile= *(++argv);
 				}
-			else if (strcmp(*argv,"-purpose") == 0)
+			else if (args_verify(&argv, &argc, &badarg, bio_err,
+									&vpm))
 				{
-				X509_PURPOSE *xptmp;
+				if (badarg)
-				if (argc-- < 1) goto end;
-				i = X509_PURPOSE_get_by_sname(*(++argv));
-				if(i < 0)
-					{
-					BIO_printf(bio_err, "unrecognized purpose\n");
 					goto end;
-					}
+				continue;
-				xptmp = X509_PURPOSE_get0(i);
-				purpose = X509_PURPOSE_get_id(xptmp);
 				}
 			else if (strcmp(*argv,"-untrusted") == 0)
 				{
@@ -153,14 +148,6 @@ int MAIN(int argc, char **argv)
 #endif
 			else if (strcmp(*argv,"-help") == 0)
 				goto end;
-			else if (strcmp(*argv,"-ignore_critical") == 0)
-				vflags |= X509_V_FLAG_IGNORE_CRITICAL;
-			else if (strcmp(*argv,"-issuer_checks") == 0)
-				vflags |= X509_V_FLAG_CB_ISSUER_CHECK;
-			else if (strcmp(*argv,"-crl_check") == 0)
-				vflags |= X509_V_FLAG_CRL_CHECK;
-			else if (strcmp(*argv,"-crl_check_all") == 0)
-				vflags |= X509_V_FLAG_CRL_CHECK|X509_V_FLAG_CRL_CHECK_ALL;
 			else if (strcmp(*argv,"-verbose") == 0)
 				v_verbose=1;
 			else if (argv[0][0] == '-')
@@ -178,6 +165,9 @@ int MAIN(int argc, char **argv)
         e = setup_engine(bio_err, engine, 0);
 #endif
 
+	if (vpm)
+		X509_STORE_set1_param(cert_ctx, vpm);
+
 	lookup=X509_STORE_add_lookup(cert_ctx,X509_LOOKUP_file());
 	if (lookup == NULL) abort();
 	if (CAfile) {
@@ -238,6 +228,7 @@ end:
 								X509_PURPOSE_get0_name(ptmp));
 		}
 	}
+	if (vpm) X509_VERIFY_PARAM_free(vpm);
 	if (cert_ctx != NULL) X509_STORE_free(cert_ctx);
 	sk_X509_pop_free(untrusted, X509_free);
 	sk_X509_pop_free(trusted, X509_free);
@@ -338,11 +329,14 @@ static int MS_CALLBACK cb(int ok, X509_STORE_CTX *ctx)
 	char buf[256];
 
 	if (!ok)
+		{
+		if (ctx->current_cert)
 			{
 			X509_NAME_oneline(
 				X509_get_subject_name(ctx->current_cert),buf,
 				sizeof buf);
 			printf("%s\n",buf);
+			}
 		printf("error %d at %d depth lookup:%s\n",ctx->error,
 			ctx->error_depth,
 			X509_verify_cert_error_string(ctx->error));
@@ -354,13 +348,21 @@ static int MS_CALLBACK cb(int ok, X509_STORE_CTX *ctx)
 		if (ctx->error == X509_V_ERR_DEPTH_ZERO_SELF_SIGNED_CERT) ok=1;
 		/* Continue after extension errors too */
 		if (ctx->error == X509_V_ERR_INVALID_CA) ok=1;
+		if (ctx->error == X509_V_ERR_INVALID_NON_CA) ok=1;
 		if (ctx->error == X509_V_ERR_PATH_LENGTH_EXCEEDED) ok=1;
 		if (ctx->error == X509_V_ERR_INVALID_PURPOSE) ok=1;
 		if (ctx->error == X509_V_ERR_DEPTH_ZERO_SELF_SIGNED_CERT) ok=1;
 		if (ctx->error == X509_V_ERR_CRL_HAS_EXPIRED) ok=1;
 		if (ctx->error == X509_V_ERR_CRL_NOT_YET_VALID) ok=1;
 		if (ctx->error == X509_V_ERR_UNHANDLED_CRITICAL_EXTENSION) ok=1;
+
+		if (ctx->error == X509_V_ERR_NO_EXPLICIT_POLICY)
+			policies_print(NULL, ctx);
+		return ok;
+
 		}
+	if ((ctx->error == X509_V_OK) && (ok == 2))
+		policies_print(NULL, ctx);
 	if (!v_verbose)
 		ERR_clear_error();
 	return(ok);

apps/version.c

@@ -115,6 +115,7 @@
 #include "apps.h"
 #include <openssl/evp.h>
 #include <openssl/crypto.h>
+#include <openssl/bn.h>
 #ifndef OPENSSL_NO_MD2
 # include <openssl/md2.h>
 #endif
@@ -172,7 +173,19 @@ int MAIN(int argc, char **argv)
 			}
 		}
 
-	if (version) printf("%s\n",SSLeay_version(SSLEAY_VERSION));
+	if (version)
+		{
+		if (SSLeay() == SSLEAY_VERSION_NUMBER)
+			{
+			printf("%s\n",SSLeay_version(SSLEAY_VERSION));
+			}
+		else
+			{
+			printf("%s (Library: %s)\n",
+				OPENSSL_VERSION_TEXT,
+				SSLeay_version(SSLEAY_VERSION));
+			}
+		}
 	if (date)    printf("%s\n",SSLeay_version(SSLEAY_BUILT_ON));
 	if (platform) printf("%s\n",SSLeay_version(SSLEAY_PLATFORM));
 	if (options) 

apps/x509.c

@@ -73,6 +73,12 @@
 #include <openssl/x509v3.h>
 #include <openssl/objects.h>
 #include <openssl/pem.h>
+#ifndef OPENSSL_NO_RSA
+#include <openssl/rsa.h>
+#endif
+#ifndef OPENSSL_NO_DSA
+#include <openssl/dsa.h>
+#endif
 
 #undef PROG
 #define PROG x509_main
@@ -81,7 +87,7 @@
 #define	POSTFIX	".srl"
 #define DEF_DAYS	30
 
-static char *x509_usage[]={
+static const char *x509_usage[]={
 "usage: x509 args\n",
 " -inform arg     - input format - default PEM (one of DER, NET or PEM)\n",
 " -outform arg    - output format - default PEM (one of DER, NET or PEM)\n",
@@ -92,7 +98,9 @@ static char *x509_usage[]={
 " -out arg        - output file - default stdout\n",
 " -passin arg     - private key password source\n",
 " -serial         - print serial number value\n",
-" -hash           - print hash value\n",
+" -subject_hash   - print subject hash value\n",
+" -issuer_hash    - print issuer hash value\n",
+" -hash           - synonym for -subject_hash\n",
 " -subject        - print subject DN\n",
 " -issuer         - print issuer DN\n",
 " -email          - print email address(es)\n",
@@ -106,6 +114,7 @@ static char *x509_usage[]={
 " -alias          - output certificate alias\n",
 " -noout          - no certificate output\n",
 " -ocspid         - print OCSP hash values for the subject name and public key\n",
+" -ocspurl        - print OCSP Responder URL(s)\n",
 " -trustout       - output a \"trusted\" certificate\n",
 " -clrtrust       - clear all trusted purposes\n",
 " -clrreject      - clear all rejected purposes\n",
@@ -167,19 +176,21 @@ int MAIN(int argc, char **argv)
 	char *infile=NULL,*outfile=NULL,*keyfile=NULL,*CAfile=NULL;
 	char *CAkeyfile=NULL,*CAserial=NULL;
 	char *alias=NULL;
-	int text=0,serial=0,hash=0,subject=0,issuer=0,startdate=0,enddate=0;
+	int text=0,serial=0,subject=0,issuer=0,startdate=0,enddate=0;
-	int ocspid=0;
+	int next_serial=0;
+	int subject_hash=0,issuer_hash=0,ocspid=0;
 	int noout=0,sign_flag=0,CA_flag=0,CA_createserial=0,email=0;
+	int ocsp_uri=0;
 	int trustout=0,clrtrust=0,clrreject=0,aliasout=0,clrext=0;
 	int C=0;
 	int x509req=0,days=DEF_DAYS,modulus=0,pubkey=0;
 	int pprint = 0;
-	char **pp;
+	const char **pp;
 	X509_STORE *ctx=NULL;
 	X509_REQ *rq=NULL;
 	int fingerprint=0;
 	char buf[256];
-	const EVP_MD *md_alg,*digest=EVP_md5();
+	const EVP_MD *md_alg,*digest=EVP_sha1();
 	CONF *extconf = NULL;
 	char *extsect = NULL, *extfile = NULL, *passin = NULL, *passargin = NULL;
 	int need_rand = 0;
@@ -358,12 +369,6 @@ int MAIN(int argc, char **argv)
 			if (--argc < 1) goto bad;
 			if (!set_name_ex(&nmflag, *(++argv))) goto bad;
 			}
-		else if (strcmp(*argv,"-setalias") == 0)
-			{
-			if (--argc < 1) goto bad;
-			alias= *(++argv);
-			trustout = 1;
-			}
 #ifndef OPENSSL_NO_ENGINE
 		else if (strcmp(*argv,"-engine") == 0)
 			{
@@ -375,8 +380,12 @@ int MAIN(int argc, char **argv)
 			C= ++num;
 		else if (strcmp(*argv,"-email") == 0)
 			email= ++num;
+		else if (strcmp(*argv,"-ocsp_uri") == 0)
+			ocsp_uri= ++num;
 		else if (strcmp(*argv,"-serial") == 0)
 			serial= ++num;
+		else if (strcmp(*argv,"-next_serial") == 0)
+			next_serial= ++num;
 		else if (strcmp(*argv,"-modulus") == 0)
 			modulus= ++num;
 		else if (strcmp(*argv,"-pubkey") == 0)
@@ -385,8 +394,11 @@ int MAIN(int argc, char **argv)
 			x509req= ++num;
 		else if (strcmp(*argv,"-text") == 0)
 			text= ++num;
-		else if (strcmp(*argv,"-hash") == 0)
+		else if (strcmp(*argv,"-hash") == 0
-			hash= ++num;
+			|| strcmp(*argv,"-subject_hash") == 0)
+			subject_hash= ++num;
+		else if (strcmp(*argv,"-issuer_hash") == 0)
+			issuer_hash= ++num;
 		else if (strcmp(*argv,"-subject") == 0)
 			subject= ++num;
 		else if (strcmp(*argv,"-issuer") == 0)
@@ -597,12 +609,19 @@ bad:
 		if ((x=X509_new()) == NULL) goto end;
 		ci=x->cert_info;
 
-		if (sno)
+		if (sno == NULL)
 			{
+			sno = ASN1_INTEGER_new();
+			if (!sno || !rand_serial(NULL, sno))
+				goto end;
 			if (!X509_set_serialNumber(x, sno)) 
 				goto end;
+			ASN1_INTEGER_free(sno);
+			sno = NULL;
 			}
-		else if (!ASN1_INTEGER_set(X509_get_serialNumber(x),0)) goto end;
+		else if (!X509_set_serialNumber(x, sno)) 
+			goto end;
+
 		if (!X509_set_issuer_name(x,req->req_info->subject)) goto end;
 		if (!X509_set_subject_name(x,req->req_info->subject)) goto end;
 
@@ -623,7 +642,7 @@ bad:
 		if (xca == NULL) goto end;
 		}
 
-	if (!noout || text)
+	if (!noout || text || next_serial)
 		{
 		OBJ_create("2.99999.3",
 			"SET.ex3","SET x509v3 extension 3");
@@ -694,14 +713,36 @@ bad:
 			else if (serial == i)
 				{
 				BIO_printf(STDout,"serial=");
-				i2a_ASN1_INTEGER(STDout,x->cert_info->serialNumber);
+				i2a_ASN1_INTEGER(STDout,
+					X509_get_serialNumber(x));
 				BIO_printf(STDout,"\n");
 				}
-			else if (email == i) 
+			else if (next_serial == i)
+				{
+				BIGNUM *bnser;
+				ASN1_INTEGER *ser;
+				ser = X509_get_serialNumber(x);
+				bnser = ASN1_INTEGER_to_BN(ser, NULL);
+				if (!bnser)
+					goto end;
+				if (!BN_add_word(bnser, 1))
+					goto end;
+				ser = BN_to_ASN1_INTEGER(bnser, NULL);
+				if (!ser)
+					goto end;
+				BN_free(bnser);
+				i2a_ASN1_INTEGER(out, ser);
+				ASN1_INTEGER_free(ser);
+				BIO_puts(out, "\n");
+				}
+			else if ((email == i) || (ocsp_uri == i))
 				{
 				int j;
 				STACK *emlst;
+				if (email == i)
 					emlst = X509_get1_email(x);
+				else
+					emlst = X509_get1_ocsp(x);
 				for (j = 0; j < sk_num(emlst); j++)
 					BIO_printf(STDout, "%s\n", sk_value(emlst, j));
 				X509_email_free(emlst);
@@ -713,10 +754,14 @@ bad:
 				if (alstr) BIO_printf(STDout,"%s\n", alstr);
 				else BIO_puts(STDout,"<No Alias>\n");
 				}
-			else if (hash == i)
+			else if (subject_hash == i)
 				{
 				BIO_printf(STDout,"%08lx\n",X509_subject_name_hash(x));
 				}
+			else if (issuer_hash == i)
+				{
+				BIO_printf(STDout,"%08lx\n",X509_issuer_name_hash(x));
+				}
 			else if (pprint == i)
 				{
 				X509_PURPOSE *ptmp;
@@ -878,6 +923,10 @@ bad:
 		                if (Upkey->type == EVP_PKEY_DSA)
 		                        digest=EVP_dss1();
 #endif
+#ifndef OPENSSL_NO_ECDSA
+				if (Upkey->type == EVP_PKEY_EC)
+					digest=EVP_ecdsa();
+#endif
 
 				assert(need_rand);
 				if (!sign(x,Upkey,days,clrext,digest,
@@ -898,6 +947,10 @@ bad:
 		                if (CApkey->type == EVP_PKEY_DSA)
 		                        digest=EVP_dss1();
 #endif
+#ifndef OPENSSL_NO_ECDSA
+				if (CApkey->type == EVP_PKEY_EC)
+					digest = EVP_ecdsa();
+#endif
 				
 				assert(need_rand);
 				if (!x509_certify(ctx,CAfile,digest,x,xca,
@@ -929,6 +982,10 @@ bad:
 		                if (pk->type == EVP_PKEY_DSA)
 		                        digest=EVP_dss1();
 #endif
+#ifndef OPENSSL_NO_ECDSA
+				if (pk->type == EVP_PKEY_EC)
+					digest=EVP_ecdsa();
+#endif
 
 				rq=X509_to_X509_REQ(x,pk,digest);
 				EVP_PKEY_free(pk);
@@ -953,9 +1010,9 @@ bad:
 
 	if (checkend)
 		{
-		time_t tnow=time(NULL);
+		time_t tcheck=time(NULL) + checkoffset;
 
-		if (ASN1_UTCTIME_cmp_time_t(X509_get_notAfter(x), tnow+checkoffset) == -1)
+		if (X509_cmp_time(X509_get_notAfter(x), &tcheck) < 0)
 			{
 			BIO_printf(out,"Certificate will expire\n");
 			ret=1;
@@ -992,8 +1049,7 @@ bad:
 		ah.data=(char *)x;
 		ah.meth=X509_asn1_meth();
 
-		/* no macro for this one yet */
+		i=ASN1_i2d_bio_of(ASN1_HEADER,i2d_ASN1_HEADER,out,&ah);
-		i=ASN1_i2d_bio(i2d_ASN1_HEADER,out,(unsigned char *)&ah);
 		}
 	else	{
 		BIO_printf(bio_err,"bad output format specified for outfile\n");
@@ -1028,105 +1084,44 @@ end:
 	OPENSSL_EXIT(ret);
 	}
 
-static ASN1_INTEGER *load_serial(char *CAfile, char *serialfile, int create)
+static ASN1_INTEGER *x509_load_serial(char *CAfile, char *serialfile, int create)
 	{
 	char *buf = NULL, *p;
-	MS_STATIC char buf2[1024];
+	ASN1_INTEGER *bs = NULL;
-	ASN1_INTEGER *bs = NULL, *bs2 = NULL;
-	BIO *io = NULL;
 	BIGNUM *serial = NULL;
+	size_t len;
 
-	buf=OPENSSL_malloc( ((serialfile == NULL)
+	len = ((serialfile == NULL)
 		?(strlen(CAfile)+strlen(POSTFIX)+1)
-			:(strlen(serialfile)))+1);
+		:(strlen(serialfile)))+1;
+	buf=OPENSSL_malloc(len);
 	if (buf == NULL) { BIO_printf(bio_err,"out of mem\n"); goto end; }
 	if (serialfile == NULL)
 		{
-		strcpy(buf,CAfile);
+		BUF_strlcpy(buf,CAfile,len);
 		for (p=buf; *p; p++)
 			if (*p == '.')
 				{
 				*p='\0';
 				break;
 				}
-		strcat(buf,POSTFIX);
+		BUF_strlcat(buf,POSTFIX,len);
 		}
 	else
-		strcpy(buf,serialfile);
+		BUF_strlcpy(buf,serialfile,len);
-	serial=BN_new();
-	bs=ASN1_INTEGER_new();
-	if ((serial == NULL) || (bs == NULL))
-		{
-		ERR_print_errors(bio_err);
-		goto end;
-		}
 
-	io=BIO_new(BIO_s_file());
+	serial = load_serial(buf, create, NULL);
-	if (io == NULL)
+	if (serial == NULL) goto end;
-		{
-		ERR_print_errors(bio_err);
-		goto end;
-		}
-	
-	if (BIO_read_filename(io,buf) <= 0)
-		{
-		if (!create)
-			{
-			perror(buf);
-			goto end;
-			}
-		else
-			{
-			ASN1_INTEGER_set(bs,1);
-			BN_one(serial);
-			}
-		}
-	else 
-		{
-		if (!a2i_ASN1_INTEGER(io,bs,buf2,sizeof buf2))
-			{
-			BIO_printf(bio_err,"unable to load serial number from %s\n",buf);
-			ERR_print_errors(bio_err);
-			goto end;
-			}
-		else
-			{
-			serial=BN_bin2bn(bs->data,bs->length,serial);
-			if (serial == NULL)
-				{
-				BIO_printf(bio_err,"error converting bin 2 bn");
-				goto end;
-				}
-			}
-		}
 
 	if (!BN_add_word(serial,1))
 		{ BIO_printf(bio_err,"add_word failure\n"); goto end; }
-	if (!(bs2 = BN_to_ASN1_INTEGER(serial, NULL)))
-		{ BIO_printf(bio_err,"error converting bn 2 asn1_integer\n"); goto end; }
-	if (BIO_write_filename(io,buf) <= 0)
-		{
-		BIO_printf(bio_err,"error attempting to write serial number file\n");
-		perror(buf);
-		goto end;
-		}
-	i2a_ASN1_INTEGER(io,bs2);
-	BIO_puts(io,"\n");
 
-	BIO_free(io);
+	if (!save_serial(buf, NULL, serial, &bs)) goto end;
-	if (buf) OPENSSL_free(buf);
-	ASN1_INTEGER_free(bs2);
-	BN_free(serial);
-	io=NULL;
-	return bs;
 
  end:
 	if (buf) OPENSSL_free(buf);
-	BIO_free(io);
-	ASN1_INTEGER_free(bs);
 	BN_free(serial);
-	return NULL;
+	return bs;
-
 	}
 
 static int x509_certify(X509_STORE *ctx, char *CAfile, const EVP_MD *digest,
@@ -1148,10 +1143,10 @@ static int x509_certify(X509_STORE *ctx, char *CAfile, const EVP_MD *digest,
 		goto end;
 		}
 	if (sno) bs = sno;
-	else if (!(bs = load_serial(CAfile, serialfile, create)))
+	else if (!(bs = x509_load_serial(CAfile, serialfile, create)))
 		goto end;
 
-	if (!X509_STORE_add_cert(ctx,x)) goto end;
+/*	if (!X509_STORE_add_cert(ctx,x)) goto end;*/
 
 	/* NOTE: this certificate can/should be self signed, unless it was
 	 * a certificate request in which case it is not. */

bugs/SSLv3

@@ -29,7 +29,7 @@ RC4-MD5, but a re-connect tries to use DES-CBC-SHA.  So netscape, when
 doing a re-connect, always takes the first cipher in the cipher list.
 
 If we accept a netscape connection, demand a client cert, have a
-non-self-sighed CA which does not have it's CA in netscape, and the
+non-self-signed CA which does not have it's CA in netscape, and the
 browser has a cert, it will crash/hang.  Works for 3.x and 4.xbeta
 
 Netscape browsers do not really notice the server sending a

bugs/VC16.bug

@@ -1,18 +0,0 @@
-Microsoft (R) C/C++ Optimizing Compiler Version 8.00c
-
-Compile with /O2 chokes the compiler on these files
-
-crypto\md\md5_dgst.c		warning '@(#)reg86.c:1.26', line 1110
-crypto\des\ofb64ede.c		warning '@(#)grammar.c:1.147', line 168
-crypto\des\ofb64enc.c		warning '@(#)grammar.c:1.147', line 168
-crypto\des\qud_cksm.c		warning '@(#)grammar.c:1.147', line 168
-crypto\rc2\rc2ofb64.c		warning '@(#)grammar.c:1.147', line 168
-crypto\objects\obj_dat.c	warning	'@(#)grammar.c:1.147', line 168
-				fatal	'@(#)grammar.c:1.147', line 168
-crypto\objects\obj_lib.c	warning	'@(#)grammar.c:1.147', line 168
-				fatal	'@(#)grammar.c:1.147', line 168
-ssl\ssl_auth.c			warning	'@(#)grammar.c:1.147', line 168
-				fatal	'@(#)grammar.c:1.147', line 168
-
-Turning on /G3 with build flags that worked fine for /G2 came up with
-divide by zero errors in 'normal' code in speed.c :-(

certs/ICE-CA.pem

@@ -1,59 +0,0 @@
-Certificate:
-    Data:
-        Version: 3 (0x2)
-        Serial Number: 1 (0x1)
-        Signature Algorithm: md5WithRSAEncryption
-        Issuer: O=European ICE-TEL project, OU=V3-Certification Authority
-        Validity
-            Not Before: Apr  2 17:35:53 1997 GMT
-            Not After : Apr  2 17:35:53 1998 GMT
-        Subject: O=European ICE-TEL project, OU=V3-Certification Authority, L=Darmstadt
-        Subject Public Key Info:
-            Public Key Algorithm: rsa
-            RSA Public Key: (512 bit)
-                Modulus (512 bit):
-                    00:82:75:ba:f6:d1:60:b5:f9:15:b3:6a:dd:29:8f:
-                    8b:a4:6f:1a:88:e0:50:43:40:0b:79:41:d5:d3:16:
-                    44:7d:74:65:17:42:06:52:0b:e9:50:c8:10:cd:24:
-                    e2:ae:8d:22:30:73:e6:b4:b7:93:1f:e5:6e:a2:ae:
-                    49:11:a5:c9:45
-                Exponent: 65537 (0x10001)
-        X509v3 extensions:
-            X509v3 Authority Key Identifier: 
-                0.........z.."p......e..
-            X509v3 Subject Key Identifier: 
-                ..~r..:..B.44fu......3
-            X509v3 Key Usage: critical
-                ....
-            X509v3 Certificate Policies: critical
-                0.0...*...
-            X509v3 Subject Alternative Name: 
-                0!..secude-support@darmstadt.gmd.de
-            X509v3 Issuer Alternative Name: 
-                0I..ice-tel-ca@darmstadt.gmd.de.*http://www.darmstadt.gmd.de/ice-tel/euroca
-            X509v3 Basic Constraints: critical
-                0....
-            X509v3 CRL Distribution Points: 
-                0200...,.*http://www.darmstadt.gmd.de/ice-tel/euroca
-    Signature Algorithm: md5WithRSAEncryption
-        17:a2:88:b7:99:5a:05:41:e4:13:34:67:e6:1f:3e:26:ec:4b:
-        69:f9:3e:28:22:be:9d:1c:ab:41:6f:0c:00:85:fe:45:74:f6:
-        98:f0:ce:9b:65:53:4a:50:42:c7:d4:92:bd:d7:a2:a8:3d:98:
-        88:73:cd:60:28:79:a3:fc:48:7a
------BEGIN CERTIFICATE-----
-MIICzDCCAnagAwIBAgIBATANBgkqhkiG9w0BAQQFADBIMSEwHwYDVQQKExhFdXJv
-cGVhbiBJQ0UtVEVMIHByb2plY3QxIzAhBgNVBAsTGlYzLUNlcnRpZmljYXRpb24g
-QXV0aG9yaXR5MB4XDTk3MDQwMjE3MzU1M1oXDTk4MDQwMjE3MzU1M1owXDEhMB8G
-A1UEChMYRXVyb3BlYW4gSUNFLVRFTCBwcm9qZWN0MSMwIQYDVQQLExpWMy1DZXJ0
-aWZpY2F0aW9uIEF1dGhvcml0eTESMBAGA1UEBxMJRGFybXN0YWR0MFkwCgYEVQgB
-AQICAgADSwAwSAJBAIJ1uvbRYLX5FbNq3SmPi6RvGojgUENAC3lB1dMWRH10ZRdC
-BlIL6VDIEM0k4q6NIjBz5rS3kx/lbqKuSRGlyUUCAwEAAaOCATgwggE0MB8GA1Ud
-IwQYMBaAFIr3yNUOx3ro1yJw4AuJ1bbsZbzPMB0GA1UdDgQWBBR+cvL4OoacQog0
-NGZ1w9T80aIRMzAOBgNVHQ8BAf8EBAMCAfYwFAYDVR0gAQH/BAowCDAGBgQqAwQF
-MCoGA1UdEQQjMCGBH3NlY3VkZS1zdXBwb3J0QGRhcm1zdGFkdC5nbWQuZGUwUgYD
-VR0SBEswSYEbaWNlLXRlbC1jYUBkYXJtc3RhZHQuZ21kLmRlhipodHRwOi8vd3d3
-LmRhcm1zdGFkdC5nbWQuZGUvaWNlLXRlbC9ldXJvY2EwDwYDVR0TAQH/BAUwAwEB
-/zA7BgNVHR8ENDAyMDCgLqAshipodHRwOi8vd3d3LmRhcm1zdGFkdC5nbWQuZGUv
-aWNlLXRlbC9ldXJvY2EwDQYJKoZIhvcNAQEEBQADQQAXooi3mVoFQeQTNGfmHz4m
-7Etp+T4oIr6dHKtBbwwAhf5FdPaY8M6bZVNKUELH1JK916KoPZiIc81gKHmj/Eh6
------END CERTIFICATE-----

certs/ICE-root.pem

@@ -1,48 +0,0 @@
-Certificate:
-    Data:
-        Version: 3 (0x2)
-        Serial Number: 0 (0x0)
-        Signature Algorithm: md5WithRSAEncryption
-        Issuer: O=European ICE-TEL project, OU=V3-Certification Authority
-        Validity
-            Not Before: Apr  2 17:33:36 1997 GMT
-            Not After : Apr  2 17:33:36 1998 GMT
-        Subject: O=European ICE-TEL project, OU=V3-Certification Authority
-        Subject Public Key Info:
-            Public Key Algorithm: rsa
-            RSA Public Key: (512 bit)
-                Modulus (512 bit):
-                    00:80:3e:eb:ae:47:a9:fe:10:54:0b:81:8b:9c:2b:
-                    82:ab:3a:61:36:65:8b:f3:73:9f:ac:ac:7a:15:a7:
-                    13:8f:b4:c4:ba:a3:0f:bc:a5:58:8d:cc:b1:93:31:
-                    9e:81:9e:8c:19:61:86:fa:52:73:54:d1:97:76:22:
-                    e7:c7:9f:41:cd
-                Exponent: 65537 (0x10001)
-        X509v3 extensions:
-            X509v3 Subject Key Identifier: 
-                ........z.."p......e..
-            X509v3 Key Usage: critical
-                ....
-            X509v3 Subject Alternative Name: 
-                0I.*http://www.darmstadt.gmd.de/ice-tel/euroca..ice-tel-ca@darmstadt.gmd.de
-            X509v3 Basic Constraints: critical
-                0....
-    Signature Algorithm: md5WithRSAEncryption
-        76:69:61:db:b7:cf:8b:06:9e:d8:8c:96:53:d2:4d:a8:23:a6:
-        03:44:e8:8f:24:a5:c0:84:a8:4b:77:d4:2d:2b:7d:37:91:67:
-        f2:2c:ce:02:31:4c:6b:cc:ce:f2:68:a6:11:11:ab:7d:88:b8:
-        7e:22:9f:25:06:60:bd:79:30:3d
------BEGIN CERTIFICATE-----
-MIICFjCCAcCgAwIBAgIBADANBgkqhkiG9w0BAQQFADBIMSEwHwYDVQQKExhFdXJv
-cGVhbiBJQ0UtVEVMIHByb2plY3QxIzAhBgNVBAsTGlYzLUNlcnRpZmljYXRpb24g
-QXV0aG9yaXR5MB4XDTk3MDQwMjE3MzMzNloXDTk4MDQwMjE3MzMzNlowSDEhMB8G
-A1UEChMYRXVyb3BlYW4gSUNFLVRFTCBwcm9qZWN0MSMwIQYDVQQLExpWMy1DZXJ0
-aWZpY2F0aW9uIEF1dGhvcml0eTBZMAoGBFUIAQECAgIAA0sAMEgCQQCAPuuuR6n+
-EFQLgYucK4KrOmE2ZYvzc5+srHoVpxOPtMS6ow+8pViNzLGTMZ6BnowZYYb6UnNU
-0Zd2IufHn0HNAgMBAAGjgZcwgZQwHQYDVR0OBBYEFIr3yNUOx3ro1yJw4AuJ1bbs
-ZbzPMA4GA1UdDwEB/wQEAwIB9jBSBgNVHREESzBJhipodHRwOi8vd3d3LmRhcm1z
-dGFkdC5nbWQuZGUvaWNlLXRlbC9ldXJvY2GBG2ljZS10ZWwtY2FAZGFybXN0YWR0
-LmdtZC5kZTAPBgNVHRMBAf8EBTADAQH/MA0GCSqGSIb3DQEBBAUAA0EAdmlh27fP
-iwae2IyWU9JNqCOmA0TojySlwISoS3fULSt9N5Fn8izOAjFMa8zO8mimERGrfYi4
-fiKfJQZgvXkwPQ==
------END CERTIFICATE-----

certs/ICE-user.pem

@@ -1,63 +0,0 @@
-Certificate:
-    Data:
-        Version: 3 (0x2)
-        Serial Number: 1 (0x1)
-        Signature Algorithm: md5WithRSAEncryption
-        Issuer: O=European ICE-TEL project, OU=V3-Certification Authority, L=Darmstadt
-        Validity
-            Not Before: Apr  2 17:35:59 1997 GMT
-            Not After : Apr  2 17:35:59 1998 GMT
-        Subject: O=European ICE-TEL project, OU=V3-Certification Authority, L=Darmstadt, CN=USER
-        Subject Public Key Info:
-            Public Key Algorithm: rsa
-            RSA Public Key: (512 bit)
-                Modulus (512 bit):
-                    00:a8:a8:53:63:49:1b:93:c3:c3:0b:6c:88:11:55:
-                    de:7e:6a:e2:f9:52:a0:dc:69:25:c4:c8:bf:55:e1:
-                    31:a8:ce:e4:a9:29:85:99:8a:15:9a:de:f6:2f:e1:
-                    b4:50:5f:5e:04:75:a6:f4:76:dc:3c:0e:39:dc:3a:
-                    be:3e:a4:61:8b
-                Exponent: 65537 (0x10001)
-        X509v3 extensions:
-            X509v3 Authority Key Identifier: 
-                0...~r..:..B.44fu......3
-            X509v3 Subject Key Identifier: 
-                ...... .*...1.*.......
-            X509v3 Key Usage: critical
-                ....
-            X509v3 Certificate Policies: critical
-                0.0...*...0.......
-            X509v3 Subject Alternative Name: 
-                0:..user@darmstadt.gmd.de.!http://www.darmstadt.gmd.de/~user
-            X509v3 Issuer Alternative Name: 
-                0....gmdca@gmd.de..http://www.gmd.de..saturn.darmstadt.gmd.de.\1!0...U.
-..European ICE-TEL project1#0!..U....V3-Certification Authority1.0...U....Darmstadt..141.12.62.26
-            X509v3 Basic Constraints: critical
-                0.
-            X509v3 CRL Distribution Points: 
-                0.0.......gmdca@gmd.de
-    Signature Algorithm: md5WithRSAEncryption
-        69:0c:e1:b7:a7:f2:d8:fb:e8:69:c0:13:cd:37:ad:21:06:22:
-        4d:e8:c6:db:f1:04:0b:b7:e0:b3:d6:0c:81:03:ce:c3:6a:3e:
-        c7:e7:24:24:a4:92:64:c2:83:83:06:42:53:0e:6f:09:1e:84:
-        9a:f7:6f:63:9b:94:99:83:d6:a4
------BEGIN CERTIFICATE-----
-MIIDTzCCAvmgAwIBAgIBATANBgkqhkiG9w0BAQQFADBcMSEwHwYDVQQKExhFdXJv
-cGVhbiBJQ0UtVEVMIHByb2plY3QxIzAhBgNVBAsTGlYzLUNlcnRpZmljYXRpb24g
-QXV0aG9yaXR5MRIwEAYDVQQHEwlEYXJtc3RhZHQwHhcNOTcwNDAyMTczNTU5WhcN
-OTgwNDAyMTczNTU5WjBrMSEwHwYDVQQKExhFdXJvcGVhbiBJQ0UtVEVMIHByb2pl
-Y3QxIzAhBgNVBAsTGlYzLUNlcnRpZmljYXRpb24gQXV0aG9yaXR5MRIwEAYDVQQH
-EwlEYXJtc3RhZHQxDTALBgNVBAMTBFVTRVIwWTAKBgRVCAEBAgICAANLADBIAkEA
-qKhTY0kbk8PDC2yIEVXefmri+VKg3GklxMi/VeExqM7kqSmFmYoVmt72L+G0UF9e
-BHWm9HbcPA453Dq+PqRhiwIDAQABo4IBmDCCAZQwHwYDVR0jBBgwFoAUfnLy+DqG
-nEKINDRmdcPU/NGiETMwHQYDVR0OBBYEFJfc4B8gjSoRmLUx4Sq/ucIYiMrPMA4G
-A1UdDwEB/wQEAwIB8DAcBgNVHSABAf8EEjAQMAYGBCoDBAUwBgYECQgHBjBDBgNV
-HREEPDA6gRV1c2VyQGRhcm1zdGFkdC5nbWQuZGWGIWh0dHA6Ly93d3cuZGFybXN0
-YWR0LmdtZC5kZS9+dXNlcjCBsQYDVR0SBIGpMIGmgQxnbWRjYUBnbWQuZGWGEWh0
-dHA6Ly93d3cuZ21kLmRlghdzYXR1cm4uZGFybXN0YWR0LmdtZC5kZaRcMSEwHwYD
-VQQKExhFdXJvcGVhbiBJQ0UtVEVMIHByb2plY3QxIzAhBgNVBAsTGlYzLUNlcnRp
-ZmljYXRpb24gQXV0aG9yaXR5MRIwEAYDVQQHEwlEYXJtc3RhZHSHDDE0MS4xMi42
-Mi4yNjAMBgNVHRMBAf8EAjAAMB0GA1UdHwQWMBQwEqAQoA6BDGdtZGNhQGdtZC5k
-ZTANBgkqhkiG9w0BAQQFAANBAGkM4ben8tj76GnAE803rSEGIk3oxtvxBAu34LPW
-DIEDzsNqPsfnJCSkkmTCg4MGQlMObwkehJr3b2OblJmD1qQ=
------END CERTIFICATE-----

certs/ICE.crl

@@ -1,9 +0,0 @@
------BEGIN X509 CRL-----
-MIIBNDCBnjANBgkqhkiG9w0BAQIFADBFMSEwHwYDVQQKExhFdXJvcGVhbiBJQ0Ut
-VEVMIFByb2plY3QxIDAeBgNVBAsTF0NlcnRpZmljYXRpb24gQXV0aG9yaXR5Fw05
-NzA2MDkxNDQyNDNaFw05NzA3MDkxNDQyNDNaMCgwEgIBChcNOTcwMzAzMTQ0MjU0
-WjASAgEJFw05NjEwMDIxMjI5MjdaMA0GCSqGSIb3DQEBAgUAA4GBAH4vgWo2Tej/
-i7kbiw4Imd30If91iosjClNpBFwvwUDBclPEeMuYimHbLOk4H8Nofc0fw11+U/IO
-KSNouUDcqG7B64oY7c4SXKn+i1MWOb5OJiWeodX3TehHjBlyWzoNMWCnYA8XqFP1
-mOKp8Jla1BibEZf14+/HqCi2hnZUiEXh
------END X509 CRL-----

certs/README.RootCerts

@@ -0,0 +1,4 @@
+The OpenSSL project does not (any longer) include root CA certificates.
+
+Please check out the FAQ:
+  * How can I set up a bundle of commercial root CA certificates?

certs/RegTP-4R.pem

@@ -1,19 +0,0 @@
-issuer= CN=4R-CA 1:PN+0.2.262.1.10.7.20=#130131,O=Regulierungsbeh\C3\88orde f\C3\88ur Telekommunikation und Post,C=DE
-notBefore=Jan 21 16:04:53 1999 GMT
-notAfter=Jan 21 16:04:53 2004 GMT
-subject= CN=4R-CA 1:PN+0.2.262.1.10.7.20=#130131,O=Regulierungsbeh\C3\88orde f\C3\88ur Telekommunikation und Post,C=DE
------BEGIN CERTIFICATE-----
-MIICZzCCAdOgAwIBAgIEOwVn1DAKBgYrJAMDAQIFADBvMQswCQYDVQQGEwJERTE9
-MDsGA1UEChQ0UmVndWxpZXJ1bmdzYmVoyG9yZGUgZsh1ciBUZWxla29tbXVuaWth
-dGlvbiB1bmQgUG9zdDEhMAwGBwKCBgEKBxQTATEwEQYDVQQDFAo0Ui1DQSAxOlBO
-MCIYDzE5OTkwMTIxMTYwNDUzWhgPMjAwNDAxMjExNjA0NTNaMG8xCzAJBgNVBAYT
-AkRFMT0wOwYDVQQKFDRSZWd1bGllcnVuZ3NiZWjIb3JkZSBmyHVyIFRlbGVrb21t
-dW5pa2F0aW9uIHVuZCBQb3N0MSEwDAYHAoIGAQoHFBMBMTARBgNVBAMUCjRSLUNB
-IDE6UE4wgZ8wDQYJKoZIhvcNAQEBBQADgY0AMIGJAoGAjzHbq2asUlqeWbXTQHso
-aVF6YIPVH3c/B2cbuy9HJ/lnE6x0asOzM2DGDqi47xkdAxPc0LZ0fxO87rkmz7xs
-jJObnVrMXpyUSDSp5Y0wqKJdsFdr6mGFOQZteIti8AJnr8xMkwnWVyuOlEXsFe1h
-5gxwQXrOcPinE6qu1t/3PmECBMAAAAGjEjAQMA4GA1UdDwEB/wQEAwIBBjAKBgYr
-JAMDAQIFAAOBgQA+RdocBmA2VV9E5aKPBcp01tdZAvvW9Tve3docArVKR/4/yvSX
-Z+wvzzk+uu4qBp49HN3nqPYMrzbTmjBFu4ce5fkZ7dHF0W1sSBL0rox5z36Aq2re
-JjfEOEmSnNe0+opuh4FSVOssXblXTE8lEQU0FhhItgDx2ADnWZibaxLG4w==
------END CERTIFICATE-----

certs/RegTP-5R.pem

@@ -1,19 +0,0 @@
-issuer= CN=5R-CA 1:PN+0.2.262.1.10.7.20=#130131,O=Regulierungsbeh\C3\88orde f\C3\88ur Telekommunikation und Post,C=DE
-notBefore=Mar 22 08:55:51 2000 GMT
-notAfter=Mar 22 08:55:51 2005 GMT
-subject= CN=5R-CA 1:PN+0.2.262.1.10.7.20=#130131,O=Regulierungsbeh\C3\88orde f\C3\88ur Telekommunikation und Post,C=DE
------BEGIN CERTIFICATE-----
-MIICaDCCAdSgAwIBAgIDDIOqMAoGBiskAwMBAgUAMG8xCzAJBgNVBAYTAkRFMT0w
-OwYDVQQKFDRSZWd1bGllcnVuZ3NiZWjIb3JkZSBmyHVyIFRlbGVrb21tdW5pa2F0
-aW9uIHVuZCBQb3N0MSEwDAYHAoIGAQoHFBMBMTARBgNVBAMUCjVSLUNBIDE6UE4w
-IhgPMjAwMDAzMjIwODU1NTFaGA8yMDA1MDMyMjA4NTU1MVowbzELMAkGA1UEBhMC
-REUxPTA7BgNVBAoUNFJlZ3VsaWVydW5nc2JlaMhvcmRlIGbIdXIgVGVsZWtvbW11
-bmlrYXRpb24gdW5kIFBvc3QxITAMBgcCggYBCgcUEwExMBEGA1UEAxQKNVItQ0Eg
-MTpQTjCBoTANBgkqhkiG9w0BAQEFAAOBjwAwgYsCgYEAih5BUycfBpqKhU8RDsaS
-vV5AtzWeXQRColL9CH3t0DKnhjKAlJ8iccFtJNv+d3bh8bb9sh0maRSo647xP7hs
-HTjKgTE4zM5BYNfXvST79OtcMgAzrnDiGjQIIWv8xbfV1MqxxdtZJygrwzRMb9jG
-CAGoJEymoyzAMNG7tSdBWnUCBQDAAAABoxIwEDAOBgNVHQ8BAf8EBAMCAQYwCgYG
-KyQDAwECBQADgYEAOaK8ihVSBUcL2IdVBxZYYUKwMz5m7H3zqhN8W9w+iafWudH6
-b+aahkbENEwzg3C3v5g8nze7v7ssacQze657LHjP+e7ksUDIgcS4R1pU2eN16bjS
-P/qGPF3rhrIEHoK5nJULkjkZYTtNiOvmQ/+G70TXDi3Os/TwLlWRvu+7YLM=
------END CERTIFICATE-----

certs/RegTP-6R.pem

@@ -1,19 +0,0 @@
-issuer= CN=6R-Ca 1:PN+0.2.262.1.10.7.20=#130131,O=Regulierungsbeh\C3\88orde f\C3\88ur Telekommunikation und Post,C=DE
-notBefore=Feb  1 09:52:17 2001 GMT
-notAfter=Jun  1 09:52:17 2005 GMT
-subject= CN=6R-Ca 1:PN+0.2.262.1.10.7.20=#130131,O=Regulierungsbeh\C3\88orde f\C3\88ur Telekommunikation und Post,C=DE
------BEGIN CERTIFICATE-----
-MIICaDCCAdSgAwIBAgIDMtGNMAoGBiskAwMBAgUAMG8xCzAJBgNVBAYTAkRFMT0w
-OwYDVQQKFDRSZWd1bGllcnVuZ3NiZWjIb3JkZSBmyHVyIFRlbGVrb21tdW5pa2F0
-aW9uIHVuZCBQb3N0MSEwDAYHAoIGAQoHFBMBMTARBgNVBAMUCjZSLUNhIDE6UE4w
-IhgPMjAwMTAyMDEwOTUyMTdaGA8yMDA1MDYwMTA5NTIxN1owbzELMAkGA1UEBhMC
-REUxPTA7BgNVBAoUNFJlZ3VsaWVydW5nc2JlaMhvcmRlIGbIdXIgVGVsZWtvbW11
-bmlrYXRpb24gdW5kIFBvc3QxITAMBgcCggYBCgcUEwExMBEGA1UEAxQKNlItQ2Eg
-MTpQTjCBoTANBgkqhkiG9w0BAQEFAAOBjwAwgYsCgYEAg6KrFSTNXKqe+2GKGeW2
-wTmbVeflNkp5H/YxA9K1zmEn5XjKm0S0jH4Wfms6ipPlURVaFwTfnB1s++AnJAWf
-mayaE9BP/pdIY6WtZGgW6aZc32VDMCMKPWyBNyagsJVDmzlakIA5cXBVa7Xqqd3P
-ew8i2feMnQXcqHfDv02CW88CBQDAAAABoxIwEDAOBgNVHQ8BAf8EBAMCAQYwCgYG
-KyQDAwECBQADgYEAOkqkUwdaTCt8wcJLA2zLuOwL5ADHMWLhv6gr5zEF+VckA6qe
-IVLVf8e7fYlRmzQd+5OJcGglCQJLGT+ZplI3Mjnrd4plkoTNKV4iOzBcvJD7K4tn
-XPvs9wCFcC7QU7PLvc1FDsAlr7e4wyefZRDL+wbqNfI7QZTSF1ubLd9AzeQ=
------END CERTIFICATE-----

certs/expired/ICE-CA.pem

@@ -1,59 +0,0 @@
-Certificate:
-    Data:
-        Version: 3 (0x2)
-        Serial Number: 1 (0x1)
-        Signature Algorithm: md5WithRSAEncryption
-        Issuer: O=European ICE-TEL project, OU=V3-Certification Authority
-        Validity
-            Not Before: Apr  2 17:35:53 1997 GMT
-            Not After : Apr  2 17:35:53 1998 GMT
-        Subject: O=European ICE-TEL project, OU=V3-Certification Authority, L=Darmstadt
-        Subject Public Key Info:
-            Public Key Algorithm: rsa
-            RSA Public Key: (512 bit)
-                Modulus (512 bit):
-                    00:82:75:ba:f6:d1:60:b5:f9:15:b3:6a:dd:29:8f:
-                    8b:a4:6f:1a:88:e0:50:43:40:0b:79:41:d5:d3:16:
-                    44:7d:74:65:17:42:06:52:0b:e9:50:c8:10:cd:24:
-                    e2:ae:8d:22:30:73:e6:b4:b7:93:1f:e5:6e:a2:ae:
-                    49:11:a5:c9:45
-                Exponent: 65537 (0x10001)
-        X509v3 extensions:
-            X509v3 Authority Key Identifier: 
-                0.........z.."p......e..
-            X509v3 Subject Key Identifier: 
-                ..~r..:..B.44fu......3
-            X509v3 Key Usage: critical
-                ....
-            X509v3 Certificate Policies: critical
-                0.0...*...
-            X509v3 Subject Alternative Name: 
-                0!..secude-support@darmstadt.gmd.de
-            X509v3 Issuer Alternative Name: 
-                0I..ice-tel-ca@darmstadt.gmd.de.*http://www.darmstadt.gmd.de/ice-tel/euroca
-            X509v3 Basic Constraints: critical
-                0....
-            X509v3 CRL Distribution Points: 
-                0200...,.*http://www.darmstadt.gmd.de/ice-tel/euroca
-    Signature Algorithm: md5WithRSAEncryption
-        17:a2:88:b7:99:5a:05:41:e4:13:34:67:e6:1f:3e:26:ec:4b:
-        69:f9:3e:28:22:be:9d:1c:ab:41:6f:0c:00:85:fe:45:74:f6:
-        98:f0:ce:9b:65:53:4a:50:42:c7:d4:92:bd:d7:a2:a8:3d:98:
-        88:73:cd:60:28:79:a3:fc:48:7a
------BEGIN CERTIFICATE-----
-MIICzDCCAnagAwIBAgIBATANBgkqhkiG9w0BAQQFADBIMSEwHwYDVQQKExhFdXJv
-cGVhbiBJQ0UtVEVMIHByb2plY3QxIzAhBgNVBAsTGlYzLUNlcnRpZmljYXRpb24g
-QXV0aG9yaXR5MB4XDTk3MDQwMjE3MzU1M1oXDTk4MDQwMjE3MzU1M1owXDEhMB8G
-A1UEChMYRXVyb3BlYW4gSUNFLVRFTCBwcm9qZWN0MSMwIQYDVQQLExpWMy1DZXJ0
-aWZpY2F0aW9uIEF1dGhvcml0eTESMBAGA1UEBxMJRGFybXN0YWR0MFkwCgYEVQgB
-AQICAgADSwAwSAJBAIJ1uvbRYLX5FbNq3SmPi6RvGojgUENAC3lB1dMWRH10ZRdC
-BlIL6VDIEM0k4q6NIjBz5rS3kx/lbqKuSRGlyUUCAwEAAaOCATgwggE0MB8GA1Ud
-IwQYMBaAFIr3yNUOx3ro1yJw4AuJ1bbsZbzPMB0GA1UdDgQWBBR+cvL4OoacQog0
-NGZ1w9T80aIRMzAOBgNVHQ8BAf8EBAMCAfYwFAYDVR0gAQH/BAowCDAGBgQqAwQF
-MCoGA1UdEQQjMCGBH3NlY3VkZS1zdXBwb3J0QGRhcm1zdGFkdC5nbWQuZGUwUgYD
-VR0SBEswSYEbaWNlLXRlbC1jYUBkYXJtc3RhZHQuZ21kLmRlhipodHRwOi8vd3d3
-LmRhcm1zdGFkdC5nbWQuZGUvaWNlLXRlbC9ldXJvY2EwDwYDVR0TAQH/BAUwAwEB
-/zA7BgNVHR8ENDAyMDCgLqAshipodHRwOi8vd3d3LmRhcm1zdGFkdC5nbWQuZGUv
-aWNlLXRlbC9ldXJvY2EwDQYJKoZIhvcNAQEEBQADQQAXooi3mVoFQeQTNGfmHz4m
-7Etp+T4oIr6dHKtBbwwAhf5FdPaY8M6bZVNKUELH1JK916KoPZiIc81gKHmj/Eh6
------END CERTIFICATE-----

certs/expired/ICE-root.pem

@@ -1,48 +0,0 @@
-Certificate:
-    Data:
-        Version: 3 (0x2)
-        Serial Number: 0 (0x0)
-        Signature Algorithm: md5WithRSAEncryption
-        Issuer: O=European ICE-TEL project, OU=V3-Certification Authority
-        Validity
-            Not Before: Apr  2 17:33:36 1997 GMT
-            Not After : Apr  2 17:33:36 1998 GMT
-        Subject: O=European ICE-TEL project, OU=V3-Certification Authority
-        Subject Public Key Info:
-            Public Key Algorithm: rsa
-            RSA Public Key: (512 bit)
-                Modulus (512 bit):
-                    00:80:3e:eb:ae:47:a9:fe:10:54:0b:81:8b:9c:2b:
-                    82:ab:3a:61:36:65:8b:f3:73:9f:ac:ac:7a:15:a7:
-                    13:8f:b4:c4:ba:a3:0f:bc:a5:58:8d:cc:b1:93:31:
-                    9e:81:9e:8c:19:61:86:fa:52:73:54:d1:97:76:22:
-                    e7:c7:9f:41:cd
-                Exponent: 65537 (0x10001)
-        X509v3 extensions:
-            X509v3 Subject Key Identifier: 
-                ........z.."p......e..
-            X509v3 Key Usage: critical
-                ....
-            X509v3 Subject Alternative Name: 
-                0I.*http://www.darmstadt.gmd.de/ice-tel/euroca..ice-tel-ca@darmstadt.gmd.de
-            X509v3 Basic Constraints: critical
-                0....
-    Signature Algorithm: md5WithRSAEncryption
-        76:69:61:db:b7:cf:8b:06:9e:d8:8c:96:53:d2:4d:a8:23:a6:
-        03:44:e8:8f:24:a5:c0:84:a8:4b:77:d4:2d:2b:7d:37:91:67:
-        f2:2c:ce:02:31:4c:6b:cc:ce:f2:68:a6:11:11:ab:7d:88:b8:
-        7e:22:9f:25:06:60:bd:79:30:3d
------BEGIN CERTIFICATE-----
-MIICFjCCAcCgAwIBAgIBADANBgkqhkiG9w0BAQQFADBIMSEwHwYDVQQKExhFdXJv
-cGVhbiBJQ0UtVEVMIHByb2plY3QxIzAhBgNVBAsTGlYzLUNlcnRpZmljYXRpb24g
-QXV0aG9yaXR5MB4XDTk3MDQwMjE3MzMzNloXDTk4MDQwMjE3MzMzNlowSDEhMB8G
-A1UEChMYRXVyb3BlYW4gSUNFLVRFTCBwcm9qZWN0MSMwIQYDVQQLExpWMy1DZXJ0
-aWZpY2F0aW9uIEF1dGhvcml0eTBZMAoGBFUIAQECAgIAA0sAMEgCQQCAPuuuR6n+
-EFQLgYucK4KrOmE2ZYvzc5+srHoVpxOPtMS6ow+8pViNzLGTMZ6BnowZYYb6UnNU
-0Zd2IufHn0HNAgMBAAGjgZcwgZQwHQYDVR0OBBYEFIr3yNUOx3ro1yJw4AuJ1bbs
-ZbzPMA4GA1UdDwEB/wQEAwIB9jBSBgNVHREESzBJhipodHRwOi8vd3d3LmRhcm1z
-dGFkdC5nbWQuZGUvaWNlLXRlbC9ldXJvY2GBG2ljZS10ZWwtY2FAZGFybXN0YWR0
-LmdtZC5kZTAPBgNVHRMBAf8EBTADAQH/MA0GCSqGSIb3DQEBBAUAA0EAdmlh27fP
-iwae2IyWU9JNqCOmA0TojySlwISoS3fULSt9N5Fn8izOAjFMa8zO8mimERGrfYi4
-fiKfJQZgvXkwPQ==
------END CERTIFICATE-----