The seek ended up seeking before the begin, which caused problems
Fixes initial sync issues with libbluray
Fixes Ticket3117
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
(cherry picked from commit 7d0e927a31)
Such pics behave more like headers which we also dont count.
Fixes Ticket3146
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
(cherry picked from commit a8dec360c5)
a758c5e added probing for various tools, such as AS. Unfortunately, GNU
AS is reading stdin with -v, and thus configure is stalled with
configure arguments such as --as=as.
Fixes Ticket #1898.
(cherry picked from commit dbb41f93c1)
The pullup filter does not work well with the fps filter, it
currently needs -r
Signed-off-by: Carl Eugen Hoyos <cehoyos@ag.or.at>
(cherry picked from commit 6d90a5c149)
lls1 taken from ff130d7
This is incompatible with libavcodec version
55.18.100 to 55.43.100 except 55.39.101
This incompatibility is caused by these libavcodec versions depending on
a libavutil 52 which is ABI incompatible with the previous ABI 52
you can avoid this incompatibility by upgrading your libavcodec so it
does no longer depend on the invalid ABI
See: 502ab21af0
See: cc6714bb16
See: 41578f70cf
See: Ticket3136
Tested-by: marillat
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
(cherry picked from commit b382d09d29)
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
also remove failed attempt at a compatibility layer, the code simply cannot work
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
(cherry picked from commit c3814ab654)
Conflicts:
libavcodec/version.h
Fixes different behavior to JM and probably several if not all
reference decoders.
We cannot just do this unconditionally as it would ruin AV sync in
some use cases.
Bug-Found-by: BugMaster
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
(cherry picked from commit d7ebeba80c)
Conflicts:
ffmpeg.c
The not handling of frame gaps has lead to the lack of a dummy reference
frame, which has lead to the failure of decode_slice_header() which has
lead to one SEI recovery message being skiped which had introduced a
slightly suboptimal recovery point for at least 1 h264 file compared to
JM.
Found-by: Carl & BugMaster
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
(cherry picked from commit 9e5ef1c5c3)
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
The intent of the original check was to increase has_b_frames when
it was incorrectly set to 0. Later codecs allowed larger values
Found-by: divVerent
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
(cherry picked from commit 8b73a3f6f6)
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Fixes overreads in HEVC
Fixes Ticket3070
Also fixed remaining issues from Ticket3075 and Ticket3076
Some lines of code taken from 0c5f839693da2276c2da23400f67a67be4ea0af1:libavcodec/x86/cabac.h
and 0c5f839693da2276c2da23400f67a67be4ea0af1:libavcodec/cabac_functions.h
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
(cherry picked from commit fa6fa2162b)
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Return value of avpriv_aac_parse_header() is not checked correctly. Fix
it.
Signed-off-by: Anssi Hannula <anssi.hannula@iki.fi>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
(cherry picked from commit f86387b6c2)
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
This patch adds CODEC_CAP_DELAY support to avcodec_decode_subtitle2.
For DVB teletext decoding, a single teletext packet can contain multiple
teletext pages. In order to support that, the teletext decoder may buffer
some pages.
Signed-off-by: Marton Balint <cus@passwd.hu>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
So far fbdev_enc device picked up first video stream and ignored others.
It is required to provide exactly one video stream now.
Signed-off-by: Lukasz Marek <lukasz.m.luki@gmail.com>
So far pulse device picked up first audio stream and ignored others.
It is required to provide exactly one audio stream now.
Signed-off-by: Lukasz Marek <lukasz.m.luki@gmail.com>
Current implementation didn't include duration of
last processed packet.
Also remove access to st->cur_dts and replace with pkt->pts.
Signed-off-by: Lukasz Marek <lukasz.m.luki@gmail.com>
The flag was and is intended to be a sane default and thus does not enable
time consuming checks. This also matches how the flag is used in decoders and
demuxers.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
This is a regression, did not bisect so dont know what caused it but
likely some changes to the command line handling code.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Don't use word-size multiplications if size == 2, and if we're using
SIMD instructions (size >= 8), complete leftover 4byte sets using movd,
not mov. Both of these changes lead to minor speedups.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
The image size of the destination image was used to determine if a source
image was positioned outside the destination image, that no intersection
could occur. Actually for these two cases the size of the source image
has to be used!
Signed-off-by: Stefano Sabatini <stefasab@gmail.com>
signed integer overflow is undefined in C
Fixes the following gcc warnings:
In file included from libavcodec/hevcpred.c:27:0:
libavcodec/hevcpred_template.c: In function ‘intra_pred_8’:
libavcodec/hevcpred_template.c:302:9: warning: assuming signed overflow does not occur when assuming that (X - c) > X is always false [-Wstrict-overflow]
In file included from libavcodec/hevcpred.c:31:0:
libavcodec/hevcpred_template.c: In function ‘intra_pred_9’:
libavcodec/hevcpred_template.c:302:9: warning: assuming signed overflow does not occur when assuming that (X - c) > X is always false [-Wstrict-overflow]
In file included from libavcodec/hevcpred.c:35:0:
libavcodec/hevcpred_template.c: In function ‘intra_pred_10’:
libavcodec/hevcpred_template.c:302:9: warning: assuming signed overflow does not occur when assuming that (X - c) > X is always false [-Wstrict-overflow]
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'afa93d198aaf2cc661c4df6d4095cd030265d30a':
hevc_parser: Set pict_type, key_frame and output_picture_number.
hevc: Search start code in decode_nal_units().
Merged-by: Michael Niedermayer <michaelni@gmx.at>
This changes the tests that used the internal hevc checksum to use framecrc
Signed-off-by: Anton Khirnov <anton@khirnov.net>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Conflicts:
tests/fate/hevc.mak
tests/ref/fate/hevc-conformance-DBLK_A_SONY_3
tests/ref/fate/hevc-conformance-DBLK_B_SONY_3
tests/ref/fate/hevc-conformance-DBLK_C_SONY_3
tests/ref/fate/hevc-conformance-DELTAQP_B_SONY_3
tests/ref/fate/hevc-conformance-DELTAQP_C_SONY_3
tests/ref/fate/hevc-conformance-POC_A_Bossen_3
Merged-by: Michael Niedermayer <michaelni@gmx.at>
this might fix Ticket2999 as well as some fate clients
untested as the original patch submitter no longer has the environment to test
this should be reverted if it does not fix the issues
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* cus/stable:
ffplay: add support for libswresample options
ffplay: use av_frame_get_pkt_pos instead directly accessing pkt pos
ffplay: factor out picture freeing code
ffplay: update and extend documentation for channel and stream switching
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* lukaszmluki/master:
lavd/pulse_audio_enc: avoid vars in for()
lavd/pulse_audio_enc: add another default to stream name
Merged-by: Michael Niedermayer <michaelni@gmx.at>
some video players on Android will not send udp hole punching messages if the rtcp port and rtp port are not two successive integers.
So, if the video player is behind NAT, it could not receive and rtp messages via udp
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Do not consider it an error if we have no frames and should discard one.
This condition can easily happen when decoding is started from an I frame
Fixes Ticket2811
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
This will avoid errors due to conflicting declarations
with linux kernels prior to 2.6.30.
Reviewed-by: Lukasz M <lukasz.m.luki@gmail.com>
Signed-off-by: Ingo Brückl <ib@wupperonline.de>
Should fix crashes or corrupt output on pre-SSE2 CPUs when they were
using SSE2-code (e.g. AMD Athlon XP 2400+ or Intel Pentium III) in
hfix or hvar single-edge (left/right) extension functions.
Tested-by: Ingo Brückl <ib@wupperonline.de>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
$(STRIP) always expands to something, because it is one of the commands
in the BRIEF list. This renders the condition pointless.
Signed-off-by: Ingo Brückl <ib@wupperonline.de>
Signed-off-by: Derek Buitenhuis <derek.buitenhuis@gmail.com>
Rename existing fbdev.c to make it a more meaningful name.
Signed-off-by: Lukasz Marek <lukasz.m.luki@gmail.com>
Signed-off-by: Stefano Sabatini <stefasab@gmail.com>
Fixes out of array read
This issue can be reproduced with:
Lucky.asf
teuflisch.asf
from http://samples.ffmpeg.org/A-codecs/VoxWare/
as well as other samples
fcb16m has 320 elements but the code before the patch can address a
table of 384 elements in its place.
I dont know if theres some elements missing, or its maybe the wrong
table, or if the parameters affecting the table size are wrong, or
if theres something else wrong.
if someone reading this has easy access to some reference. (binary
with the tables in it, spec, whatever, please contact us)
This solution fixes the inconsistency by padding the table with zeros,
this variant was suggested by Vitor Sessak. And ensures that nothing
currently working breaks.
Found-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* commit '0d6d4a9e4a626be6ff55839eab4114aeac45ba88':
avstring-test: Mark pointer passed to av_free() as non-const
See: ab796ded75
Merged-by: Michael Niedermayer <michaelni@gmx.at>
That makes avformat & avcodec thread safe without the need to explicitly
register a lock manager.
Reviewed-by: wm4 <nfxjfg@googlemail.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* qatar/master:
mpegvideo: Drop a faulty assert
Conflicts:
libavcodec/mpegvideo.c
Merge for metadata only, the change looks wrong.
Merged-by: Michael Niedermayer <michaelni@gmx.at>
F4V is Adobe's mp4/iso media variant, with the most significant
addition/change being supporting other flash codecs than just
aac/h264.
Signed-off-by: Martin Storsjö <martin@martin.st>
* commit 'f457edb69794c7e13b3630456d72f7942fff19f7':
aacdec: Use avpriv_report_missing_feature() instead of custom logging.
Merged-by: Michael Niedermayer <michaelni@gmx.at>
This also fixes the code so it decodes raw images correctly again
No release is affected by this
Found-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
cherry picked from commit b971f2c8fdc60f8bab605a6e8060492eb548a53a
cherry picked from commit e57b0a2c915ce6b8a9d57b8292f6581f0680842e
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* commit '19f53840001a7afcdb57b2a797e363ec8081aba3':
h264_parser: Fix order of operations
See: 9c0fe487c7
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '23e6d3d4e27c83e06d00aa072c84d057bd1dad23':
fate: vpx: Remove one redundant $(eval) invocation
Merge for meta data only as this breaks the affected fate tests
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Fixes out of bounds access
Fixes CID732170
Fixes CID732169
No filter is known to use this function in a way so the issue can be reproduced.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Footer partition may not be present and even if present footer partition
offset may not be set in any partition except last one.
Signed-off-by: Paul B Mahol <onemda@gmail.com>
pthread_wait_cond can wake up unexpectedly (Wikipedia: Spurious_wakeup).
The FF_THREAD_SLICE thread mechanism could spontaneously execute
jobs or allow the caller of avctx->execute to return before all
jobs were complete.
Test both cases to ensure the wakeup is real.
Signed-off-by: Ben Jackson <ben@ben.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Signed-off-by: Derek Buitenhuis <derek.buitenhuis@gmail.com>
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
If there is only 1 stream and seek isn't called with a specific stream
index, we pick the first (and only) one.
Regression since dbfe6110.
Fixes CID1108591.
The memset following the memcpy was silencing the problem since
re-writing that same byte.
Fixes CID1108597, CID1108598, (16x16)
CID1108599, CID1108600, (8x8)
CID1108601, CID1108602 (32x32)
Signed-off-by: Clément Bœsch <u@pkh.me>
Without this, it is 0/0 by default, which is not allowed.
This sets it to 0/1, which means "undefined".
Signed-off-by: Reimar Döffinger <Reimar.Doeffinger@gmx.de>
This case does not work as off is uninitialized and it should be
handled fine by the generic code below
Fixes CID1108608
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
This isnt needed but it cant hurt, its also more consistent with
how its calculated a few lines before.
See: CID1108593
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Define positive return values as non errors and leave further meaning undefined
This allows future extensions to use these values
Reviewed-by: Paul B Mahol <onemda@gmail.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Error check should be done by checking negative value, not non-zero.
Signed-off-by: Lukasz Marek <lukasz.m.luki@gmail.com>
Signed-off-by: Stefano Sabatini <stefasab@gmail.com>
In particular, fix punctuation in docs and make option help messages
grammatically consistent.
Signed-off-by: Lukasz Marek <lukasz.m.luki@gmail.com>
Signed-off-by: Stefano Sabatini <stefasab@gmail.com>
fbdev->data was allocated with size fbdev->fixinfo.smem_len, release data
in fbdev_read_close() using the same size.
Signed-off-by: Lukasz Marek <lukasz.m.luki@gmail.com>
Signed-off-by: Stefano Sabatini <stefasab@gmail.com>
Use an helper function to seek by sector to avoid possible mistakes
due shifting by WTV_SECTOR_BITS a 32bit integer.
Contrary to common intuition, a 32 bit integer left shifted
by a 64 bit integer does not promote the 32 bit integer to
64 bit before shifting.
A few fate instances on OS/2, OpenBSD, FreeBSD and IA64 linux currently
still fail a few tests with a maxdiff of 6.
Signed-off-by: Martin Storsjö <martin@martin.st>
The new syntax is preferred since it allows backward syntax compatibility
with libswr when switching to the new option handling code with
AV_OPT_TYPE_CHANNEL_LAYOUT.
With the new parser the string:
1234
is interpreted as a channel layout mask, rather than as a number of
channels, and thus it's compatible with the current way to set a channel
layout as an integer (e.g. for the icl and ocl options) making use of
integer option values.
ff_get_channel_layout() with compat=0 will be used in the
AV_OPT_TYPE_CHANNEL handler code.
The user is encouraged to switch to the new forward compatible syntax,
which requires to put a trailing "c" when specifying a layout as a number
of channels.
Not sure this is the correct solution but that can be investigated too once
the docs build again
Tested-by: ubitux
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
This makes sure that pointers from av_strdup are reallocable,
which is used in av_dict_set if the AV_DICT_APPEND flag is set.
Nothing should rely on pointers from av_strdup being aligned.
Signed-off-by: Martin Storsjö <martin@martin.st>
* commit '95587859cc69e5abe37c9e3af48008032d98e262':
mpegvideo: Move obmc in a separate function
Conflicts:
libavcodec/mpegvideo_motion.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'a90905db2e6ab1840890f3a88bfd3bf008b9d886':
ffv1: Assume bitdepth 0 means 8bit
Conflicts:
libavcodec/ffv1dec.c
Note, FFmpeg is not affected by this bug
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '4baba6c813b7a1f27370e20fb1a87b05fcb39208':
h264_parser: Fix POC parsing for the case where MMCO_RESET is present.
Conflicts:
libavcodec/h264.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'b81dbd6cb7522bea96d78a52f8a4c25a47b820c9':
h264_parser: Fix POC parsing for the case where MMCO_RESET is absent.
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '68edd5be0980941924ae633d98589d56a8091bbd':
FATE: use proper comparison mode in the lavr tests
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '29c455ce3daf7fb369ba20cf77c74bd8e3b43b55':
bitstream: Check the result of av_malloc()
Conflicts:
libavcodec/bitstream.c
See: aa74810fc6
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'c0085f94fea89b180e5727b193484a83586d3490':
mpegaudio_tablegen: Don't use llrint
cos_tablegen: Don't use lrint
tablegen: Don't use cbrtf in host tools
tableprint: Fix use of a size_t print with MSVC
Conflicts:
libavcodec/cbrt_tablegen.h
libavcodec/mpegaudio_tablegen.h
See: e516921143
See: 5086720993
See: 008014b5e7
See: 00aa24ffee
Merged-by: Michael Niedermayer <michaelni@gmx.at>
The tests are disabled as 2 do not pass yet
(fate-hevc-conformance-PPS_A_qualcomm_7 and fate-hevc-conformance-RAP_A_docomo_4)
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
cbrtf() took floats but it represented 1/3 exactly
and even if not more precission should be better in theory
for the table generation
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
The prev_ values were not set after parsing POC.
Increase length of the buffer decoded to parse enough safely.
Signed-off-by: Anton Khirnov <anton@khirnov.net>
You cannot count on it being present on all systems, and you
cannot include libm.h in a host tool, so just hard code a baseline
implementation.
Signed-off-by: Derek Buitenhuis <derek.buitenhuis@gmail.com>
You cannot count on it being present on all systems, and you
cannot include libm.h in a host tool, so just hard code a baseline
implementation.
Signed-off-by: Derek Buitenhuis <derek.buitenhuis@gmail.com>
You cannot count on them being present on all systems, and you
cannot include libm.h in a host tool, so just hard code baseline
implementations.
Signed-off-by: Derek Buitenhuis <derek.buitenhuis@gmail.com>
You cannot count on it being present on all systems, and you
cannot include libm.h in a host tool, so just hard code a baseline
implementation.
Signed-off-by: Derek Buitenhuis <derek.buitenhuis@gmail.com>
You cannot count on it being present on all systems, and you
cannot include libm.h in a host tool, so just hard code a baseline
implementation.
Signed-off-by: Derek Buitenhuis <derek.buitenhuis@gmail.com>
You cannot count on them being present on all systems, and you
cannot include libm.h in a host tool, so just hard code baseline
implementations.
Signed-off-by: Derek Buitenhuis <derek.buitenhuis@gmail.com>
* qatar/master:
http: Check the auth string contents and not only the pointer
Conflicts:
libavformat/http.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Adds support for demuxing SeekPreRoll and CodecDelay container
elements.
Signed-off-by: Vignesh Venkatasubramanian <vigneshv@google.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
This makes sure we don't send the Except: 100-continue header
if no authentication credentials have been provided.
Signed-off-by: Martin Storsjö <martin@martin.st>
seek_preroll field is added to the AVCodecContext struct. It indicates
the number of samples to be discarded whenever there is a discontinuity.
The minor version is bumped accordingly.
Signed-off-by: Vignesh Venkatasubramanian <vigneshv@google.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'c108ba0175d4fc3a3253a8b0f782fbfb96ba5098':
x86inc: Use VEX-encoded instructions in AVX functions
Merged-by: Michael Niedermayer <michaelni@gmx.at>
This is so we can sync to x264's version of FMA4 support.
This partialy reverts commit 79687079a9.
Signed-off-by: Derek Buitenhuis <derek.buitenhuis@gmail.com>
Automatically use VEX-encoding in AVX/AVX2/XOP/FMA3/FMA4
functions for all instructions that exists in a VEX-encoded
version.
This change makes it easier to extend existing code to use AVX2.
Also add support for AVX emulation of a few instructions that
were missing before.
Signed-off-by: Derek Buitenhuis <derek.buitenhuis@gmail.com>
With the forthcoming VEX instruction emulation, mulps
must have only the third operand point to memory, as
this is what vmulps expects.
Signed-off-by: Derek Buitenhuis <derek.buitenhuis@gmail.com>
Normally, all channel ids are between 0 and 10, while they in
uncommon cases can have values up to 64k.
This avoids allocating two arrays for up to 64k entries (at a total
of over 6 MB in size) each when most of them aren't used at all.
Signed-off-by: Martin Storsjö <martin@martin.st>
It appears this bug originates from a "work in progress" patch from
ffmpeg-devel that was heavily redesigned by and integrated in libav
And that patch even had a reply and review on the mailing list pointing
out that it had a bug.
This fixes a deadlock with ffserver
See: [FFmpeg-devel] [PATCH] Fix HTTP authentication problem for POST actions.
[FFmpeg-devel] [PATCH 1/3] Introduce auth_phase flag, which will be true if authorization needs to be sent, but the type of authorization is not known yet Partial fix#3036
[FFmpeg-devel] [PATCH 2/3] Only add Transfer-Encoding header when not in authorization phase, because server will wait (indefinitely) for data when receiving this header Partial fix#3036
[FFmpeg-devel] [PATCH 3/3] Only allow posting data and/or forcing a 200 code, enabling posting isml chunks, -after- we did a possible first request to get a 403 from the server telling us which type of authentication to apply Final part fix#3036
See: 71549a857b
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* commit '71549a857b13edf4c4f95037de6ed5bb4c4bd4af':
http: Support auth method detection for POST
Conflicts:
libavformat/version.h
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* cus/stable:
ffplay: add support for changing the channel by the C key
ffplay: cycle through the streams of the current program, and not every stream
ffplay: add null packet after attached pics packet
ffplay: factor out putting null packet into the queue
Merged-by: Michael Niedermayer <michaelni@gmx.at>
When changing the audio, video or subtitle stream, from now on, ffplay will
cycle through the streams of the current program.
Signed-off-by: Marton Balint <cus@passwd.hu>
Inspired by a patch by Jakob van Bethlehem. But instead of doing
an empty POST first to trigger the WWW-Authenticate header (which
would succeed if no auth actually was required), add an Expect:
100-continue header, which is meant to be used exactly for
cases like this.
The header is added if doing a post, and the user has specified
authentication but we don't know the auth method yet.
Not all common HTTP servers support the Expect: 100-continue header,
though, so we only try to use it when it really is needed. The user
can request it to be added for other POST requests as well via
an option - which would allow the caller to know immediately that
the POST has failed (e.g. if no auth was provided but the server
required it, or if the target URL simply doesn't exist).
This is only done for write mode posts (e.g. posts without pre-set
post_data) - for posts with pre-set data, we can just redo the post
if it failed due to 401.
Signed-off-by: Martin Storsjö <martin@martin.st>
The default is to autodetect the auth method. This does require one
extra request (and also closing and reopening the http connection).
For some cases such as HTTP POST, the autodetection is not handled
properly (yet).
No option is added for digest, since this method requires getting
nonce parameters from the server first and can't be used straight
away like Basic.
Signed-off-by: Martin Storsjö <martin@martin.st>
Sometimes, if pthread_create() failed, then pthread_cond_wait() could
accidentally be called in the worker threads after the uninit function
had already called pthread_cond_broadcast(), leading to a deadlock.
Don't call pthread_cond_wait() if c->done is set.
Signed-off-by: Derek Buitenhuis <derek.buitenhuis@gmail.com>
* commit '0cb83c563848bf8f8365e7bd30e7e6b57ef360f0':
indeo4: Check the block size if reusing the band configuration
Conflicts:
libavcodec/indeo4.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'c18375ec8040a9fe0f186b2033dc975883143758':
oggvorbisdec: add support for embedded cover art
Conflicts:
libavformat/oggparsevorbis.c
See: 193782216f
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'ecab1c77410f023b437c6ed3a3281be8f039e574':
oggdec: add support for Opus in Ogg demuxing
Conflicts:
Changelog
libavformat/oggparseopus.c
libavformat/version.h
See: e62fd6619f
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '364af376f343d4706c4cdb7ab9fe0863994e6c01':
FATE: add lavr resampling tests
The tests do not pass, and thus where disabled
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '9ab5f7107d2f1411e9fda6c36af64524e5ed31d1':
FATE: add lavr mixing tests
The tests do not pass, and thus where disabled
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'df6737a55f5dc7c0ae5272bc5fa6182836d5481c':
audio_mix: fix channel order in mix_1_to_2_fltp_flt_c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Somehow 2 different identifiers have come into existence which makes supporting
both until the next major version bump required
I did not investigate how exactly that did happen.
wm4, j-b and smarter prefer hevc.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'e6ed8668597cfea25dfb350a9b4df7fb2efc1d90':
flvenc: Write proper cropping for VP6 even if there's no extradata
Conflicts:
libavformat/flvenc.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'be1e1373d267bae2af8a62d79eef736736f24565':
flvenc: Support muxing VP6A as well
Conflicts:
libavformat/flvenc.c
See: 42ae83c196
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '41a10f3ba149a2012de499d0b4ad4955d81f28d5':
vp6: Support cropping to AVCodecContext.width/height
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '756547ce7f4d67a18663503e2157aebed3531703':
avi: DV in AVI must be considered single stream
Conflicts:
libavformat/avidec.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
The plain VP6 format is vertically flipped compared to VP6F/VP6A.
Support for the plain VP6 format was added in 09d8c0ae83 (which
also introduced support for muxing VP6F properly in general).
Signed-off-by: Martin Storsjö <martin@martin.st>
In these cases, there is no extradata but only the properly set
width/height values by the demuxer.
This makes sure VP6 in F4V files is cropped properly.
This is similar to what is done for H264 for letting the container
width/height override what's in the bitstream, since 30f515091.
Signed-off-by: Martin Storsjö <martin@martin.st>
* commit '61cd19b8bc32185c8caf64d89d1b0909877a0707':
vmnc: Port to bytestream2
Conflicts:
libavcodec/vmnc.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
This ensures that all the non zero fields get setup correctly.
Alternatively their initialization could be duplicated.
Fixes Ticket2738
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* commit '9e3946aadaef6f7d7ef15c31b5ff1e73d0ba79a1':
build: Require yasm 0.8.0 or higher
Conflicts:
configure
If someone wants to continue supporting older yasm/nasm versions, patches are of course welcome!
Merged-by: Michael Niedermayer <michaelni@gmx.at>
This is in preparation for removing a .rodata kludge
which was only required for older YASM versions.
The movbe instruction was introduced in 0.8.0, which already
had AVX, which was introduced in 0.7.0, and NASM introduced
movbe in 2.0.3, which is the same version which introduced
AVX support.
Also, make the failure message more accurate.
Signed-off-by: Derek Buitenhuis <derek.buitenhuis@gmail.com>
Add Twitter with myself (Lou Logan) as maintainer.
Add Google+ with Paul B Mahol, Michael Niedermayer, and Alexander
Strasser as maintainers.
Move website and mailinglists from Miscellaneous Areas to
Communication.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
The main motive of this commit is to make the offline copy of the HTML doc as
pretty as the online (ffmpeg.org) one. This also introduced new styles for
<h2> to <h4>.
Signed-off-by: Timothy Gu <timothygu99@gmail.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
This make name of the file more specific
as there is also encoder implementation.
Signed-off-by: Lukasz Marek <lukasz.m.luki@gmail.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* commit '47f9d7ce5493e119e09d1227d017414feaaf8d97':
x86inc: Check for __OUTPUT_FORMAT__ having a value of "x64"
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'bbe4a6db44f0b55b424a5cc9d3e89cd88e250450':
x86inc: Utilize the shadow space on 64-bit Windows
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '63f0d623100bdb0c6081456127f4b6713e83d3db':
x86inc: Use SSE instead of SSE2 for copying data
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'ad76e6e7e193b98e7335156422d35467816f9ef1':
x86inc: Set ELF hidden visibility for global constants
Merged-by: Michael Niedermayer <michaelni@gmx.at>
This should make no difference as this code is only used by removelogo which
seems to refuse to use masks of different size.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Prevents a crash if the misaligned exception mask bit is
cleared for some reason.
Misaligned SSE functions are only used on AMD Phenom CPUs
and the benefit is miniscule. They also require modifying
the MXCSR control register and by removing those functions
we can get rid of that complexity altogether.
Signed-off-by: Derek Buitenhuis <derek.buitenhuis@gmail.com>
Store XMM6 and XMM7 in the shadow space in functions that
clobbers them. This way we don't have to adjust the stack
pointer as often, reducing the number of instructions as
well as code size.
Signed-off-by: Derek Buitenhuis <derek.buitenhuis@gmail.com>
SWAP with >=3 named (rather than numbered) args
PERMUTE followed by SWAP with 2 named args
used to produce the wrong permutation
Signed-off-by: Derek Buitenhuis <derek.buitenhuis@gmail.com>
The implementation of 25cb0c1a involves lots of spurious labels.
The effect of keeping those labels around is making debugging harder.
Those labels are meaningless, and complicate the disassembly. Also,
gdb can't tell the difference between them and function entry points.
This new strip command is irrelevant to any usage of Libav that would
have used the old fully stripped version, because the old one was for
non-debug use.
Signed-off-by: Derek Buitenhuis <derek.buitenhuis@gmail.com>
Now RET checks whether it immediately follows a branch, so the
programmer dosen't have to keep track of that condition. REP_RET
is still needed manually when it's a branch target, but that's
much rarer.
The implementation involves lots of spurious labels, but that's OK
because we strip them.
Signed-off-by: Derek Buitenhuis <derek.buitenhuis@gmail.com>
otherwise enabling the filter would not work if the part hasnt been
enabled by other means already
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* commit '2ddb35b91131115c094d90e04031451023441b4d':
x86: dsputil: Separate ff_add_hfyu_median_prediction_cmov from dsputil_mmx
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '6b3ff6f91a535d6383f41ca7bdf760165dcb6015':
swscale: provide a default scaler if none is set
Conflicts:
libswscale/utils.c
The default is left at bicubic until someone has compared the scalers
properly speed and quality wise.
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '258414d0771845d20f646ffe4d4e60f22fba217c':
x86: fdct: Initialize optimized fdct implementations in the standard way
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Lanczos for general case, sinc for upscaling, Gaussian for
downscaling. According to current literature these scalers
should be the best quality-wise algorithms for each case.
Inspired from a patch by wm4 <nfxjfg@googlemail.com>
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
* commit '583a287f6f48f263859df142e6f90993e4217c72':
ismindex: Calculate the file duration among the included tracks
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'd347a7b248d4ffdc278373fecf033b0ade030343':
ismindex: Use the individual stream duration instead of the global one
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'b698542ad83284fbb8c22404e3cafeb2dd739d38':
mov: Don't allocate arrays with av_malloc that will be realloced
Merged-by: Michael Niedermayer <michaelni@gmx.at>
If the input file contains other tracks (non video/audio) that
aren't included in ismindex, the global file duration as returned
by libavformat might not be equal to the maximum of the duration
of the actual included tracks.
Signed-off-by: Martin Storsjö <martin@martin.st>
The stream duration is used for calculating the duration of the
last fragment easily without manually parsing anything else than
the mfra/tfra atoms. When the global file duration was used
previously, the duration of the last fragment could end up wrong
if the streams weren't equally long.
Signed-off-by: Martin Storsjö <martin@martin.st>
* commit '8921e32f730c191543b84e61338bc9d549aa05a3':
rtmpproto: Readjust the end of the flv buffer if handle_metadata exited early
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '24fee95321c1463360ba7042d026dae021854360':
rtmpproto: Move the flv header/trailer addition to append_flv_data
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '4d6d70292e91a7ef027824d731b6b6570ceabf2f':
rtmpproto: Pass the 'live' parameter in the right unit
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'a6b361325f2bfc8d9d4e5f761d6c1a07b209c4fb':
rtmpproto: Print the error code string if there's no description
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '47b6cfc2a0333fb24f074d27830bf35ae5007050':
avformat/output-example: Declare link dependency on libswscale in the Makefile
Conflicts:
libavformat/Makefile
Changes to libavformat/Makefile are not merged as our build system for the examples
is different.
Merged-by: Michael Niedermayer <michaelni@gmx.at>
This wasn't an issue prior to 58404738, when the whole RTMP packet
was copied at once and the length of the individual embedded flv
packets only were validated by the flv demuxer.
Prior to this patch, this could lead to reads and writes out of bound.
Signed-off-by: Martin Storsjö <martin@martin.st>
If the embedded flv packets were incomplete and we aborted the
copying loop early, make sure the flv buffer is trimmed to
only contain full packets.
Signed-off-by: Martin Storsjö <martin@martin.st>
update_offset is also called from handle_metadata, where the
packet header sizes is already included in the size.
Previously this lead to flv_data/flv_size including 15 uninitialized
bytes at the end after each call to handle_metadata, making the
flv demuxer lose sync with the stream.
Also remove leftover copying in handle_metadata. This is a leftover
from the refactoring in 5840473. (Previously this final mempcy was
the one that copied all the packets at once, while this is done
within the loop right now.) After making sure flv_size is set to
the right size, this write was out of bounds.
Signed-off-by: Martin Storsjö <martin@martin.st>
This was overlooked in d872fb0f7 since I assumed all the realloc
issues in the rtmp code was fixed already.
Signed-off-by: Martin Storsjö <martin@martin.st>
The current magic numbers passed are values in seconds, while the
parameter itself should be passed over the wire in milliseconds.
This makes (some/all?) live streams from Red5 work correctly, that
previously returned StreamNotFound even with "-rtmp_live live". After
this commit, the default 'any' also works on these streams.
Signed-off-by: Martin Storsjö <martin@martin.st>
On (certain streams/setups at least on) Red5, the description string
actually is present, but empty. Therefore, first try loading the
description, but if not found or empty, load the code string instead.
The code string is quite understandable in most cases anyway (like
"NetStream.Play.StreamNotFound").
Signed-off-by: Martin Storsjö <martin@martin.st>
Here is an extract of fate-samples/sub/vobsub.idx, with an additional
text at the end of each line to better identify each bitmap:
timestamp: 00:04:55:445, filepos: 00001b000 Ace!
timestamp: 00:05:00:049, filepos: 00001b800 Wake up, honey!
timestamp: 00:05:02:018, filepos: 00001c800 I gotta go to work.
timestamp: 00:05:02:035, filepos: 00001d000 <???>
timestamp: 00:05:04:203, filepos: 00001d800 Look after Clayton, okay?
timestamp: 00:05:05:947, filepos: 00001e800 I'll be back tonight.
timestamp: 00:05:07:957, filepos: 00001f800 Bye! Love you.
timestamp: 00:05:21:295, filepos: 000020800 Hey, Ace! What's up?
timestamp: 00:05:23:356, filepos: 000021800 Hey, how's it going?
timestamp: 00:05:24:640, filepos: 000022800 Remember what today is? The 3rd!
timestamp: 00:05:27:193, filepos: 000023800 Look over there!
timestamp: 00:05:28:369, filepos: 000024800 Where are they going?
timestamp: 00:05:28:361, filepos: 000025000 <???>
timestamp: 00:05:29:946, filepos: 000025800 Let's go see.
timestamp: 00:05:31:230, filepos: 000026000 I can't, man. I got Clayton.
Note the two "<???>": they are basically split subtitles (with the
previous one), which the dvdsub decoder is now supposed to reconstruct
with a previous commit. But also note that while the first chunk has
increasing timestamps,
timestamp: 00:05:02:018, filepos: 00001c800
timestamp: 00:05:02:035, filepos: 00001d000
...it's not the case of the second one (and this is not an exception in the
original file):
timestamp: 00:05:28:369, filepos: 000024800
timestamp: 00:05:28:361, filepos: 000025000
For the dvdsub decoder, they need to be "filepos'ed" ordered, but the
FFDemuxSubtitlesQueue is timestamps ordered, which is the reason of the
introduction of a sub sort method in the context, to allow giving
priority to the position, and then the timestamps. With that change, the
dvdsub decoder get fed with ordered packets.
Now the packet size estimation was also broken: the filepos differences
in the vobsub index defines the full data read between two subtitles
chunks, and it is necessary to take into account what is read by the
mpegps_read_pes_header() function since the length returned by that
function doesn't count the size of the data it reads. This is fixed with
the introduction of total_read, and {old,new}_pos. By doing this change,
we can drop the unreliable len16 heuristic and simplify the whole loop.
Note that mpegps_read_pes_header() often read more than one PES packet
(typically in one call it can read 0x1ba and 0x1be chunk along with the
relevant 0x1bd packet), which triggers the "total_read + pkt_size >
psize" check. This is an expected behaviour, which could be avoided by
having a more chunked version of mpegps_read_pes_header().
The latest change is the extraction of each stream into its own
subtitles queue. If we don't do this, the maximum size for a subtitle
chunk is broken, and the previous changes can not work. Having each
stream in a different queue requires some little adjustments in the
seek code of the demuxer.
This commit is only meaningful as a whole change and can not be easily
split. The FATE test changes because it uses the vobsub demuxer.
This avoids future ABI issues when the field is moved to the end of the
struct.
Reviewed-by: Marton Balint <cus@passwd.hu>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'be0b4c70ec40d7f9ac8e416a4379d4a387421184':
atrac3: Replace a silly counter variable name with plain 'j'
Conflicts:
libavcodec/atrac3.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
This prevents future frames from using half initialized/inconsistent
structures
Fixes assertion failure
Fixes Ticket2897
Reviewed-by: Paul B Mahol <onemda@gmail.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* qatar/master:
lavc: mark deprecated AVCodec.max_lowres for removal on next bump
Conflicts:
libavcodec/avcodec.h
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '06e7301a2efa8dededecbe6836ee5b59bf7e5e76':
vf_interlace: do not process an already interlaced frame
Merged-by: Michael Niedermayer <michaelni@gmx.at>
previously only codec_ids could be forced, which did not allow
forcing a specific implementation like libopenjpeg vs jpeg2000.
Reviewed-by: Paul B Mahol <onemda@gmail.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
previously only codec_ids could be forced, which did not allow
forcing a specific implementation like libopenjpeg vs jpeg2000.
Reviewed-by: Paul B Mahol <onemda@gmail.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'cc41167aede4c101ad17eeffa8f39bb6c23d3dad':
asfdec: Check the return value of asf_read_stream_properties
Merged-by: Michael Niedermayer <michaelni@gmx.at>
The reverted commit introduced undefined behavior.
undefined in the sense that the evaluation order of the dependencies affects the results
Fixes Ticket2920
This reverts commit c32db6adab, reversing
changes made to 05f1b4e2ec.
Alternative solutions would be to change the dependency solver to handle non trivial
dependencies or to enable zlib by default before the dependency solver, this would
leave a zlib dependency in the libs though then even when no zlib is needed or used.
Before this commit, sws_init_context() failed with an error if no scaler
was explicitly set.
Defaulting to something reasonable is better behavior.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
This makes sure errors in setting stream parameters are passed
on to the caller. This avoids successfully opening files while
some parameters aren't filled in properly.
Reported-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
CC: libav-stable@libav.org
Signed-off-by: Martin Storsjö <martin@martin.st>
* commit '23d0fdcf6f30843fc3f14084d80581f1ca10f1f3':
Add support for multichannel ATRAC3+ streams.
Conflicts:
libavformat/oma.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'ff07ec143ebd3833fd5a3f4b6c00474ac523a31f':
pcx: Return an error on broken palette if err_detect is set to 'explode'
Conflicts:
libavcodec/pcx.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'd1d99e3befea5d411ac3aae72dbdecce94f8b547':
pcx: Check the packet size before assuming it fits a palette
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'fc739b3eefa0b58d64e7661621da94a94dbc8a82':
xan: Only read within the data that actually was initialized
Conflicts:
libavcodec/xan.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '30db94dc399f6e4ef8905049d9b740556f0fce47':
xan: Use bytestream2 to limit reading to within the buffer
Conflicts:
libavcodec/xan.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '9fb0de86b49e9fb0709a8ad1e1875e35da841887':
pcx: Consume the whole packet if giving up due to missing palette
Conflicts:
libavcodec/pcx.c
See: b4e516e30e
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'c231987662194d009dd91bfc57c678e0e70ca161':
mov: Make sure the read sample count is nonnegative
Conflicts:
libavformat/mov.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '640a2427aafa774b83316b7a8c5c2bdc28bfd269':
bfi: Add some very basic sanity checks for input packet sizes
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'a9221e39600a31ee13e736e9e47743cde23f0280':
electronicarts: Add more sanity checking for the number of channels
Note: This check is probably unnecessary
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '59480abce7e4238e22b3a4a904a9fe6abf4e4188':
alac: Do bounds checking of lpc_order read from the bitstream
See: fd4f4923cc
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '8d07258bb6063d0780ce2d39443d6dc6d8eedc5a':
avidec: Make sure a packet is large enough before reading its data
Conflicts:
libavformat/avidec.c
See: 028cc42a16
Note: data!=NULL implies that the allocated array is at least FF_INPUT_BUFFER_PADDING_SIZE large
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '68ff9981283a56c731f00c2ee7901103665092fc':
vqf: Make sure the bitrate is in the valid range
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '9277050e2918e0a0df9689721a188a604d886616':
vqf: Make sure sample_rate is set to a valid value
See: e481ba2ed7
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Output plane height used horizontal instead of vertical subsampling.
This is just cosmetic change as filter does not support formats where
vertical subsampling does not match horizontal one.
Signed-off-by: Paul B Mahol <onemda@gmail.com>
This fixes reads out of bounds.
Reported-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
CC: libav-stable@libav.org
Signed-off-by: Martin Storsjö <martin@martin.st>
We read 2 bytes for 15 out of 16 pixels, therefore we need to
have at least 30 bytes, not 16.
Reported-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
CC: libav-stable@libav.org
Signed-off-by: Martin Storsjö <martin@martin.st>
Decoded data is always written in pairs within this decoder.
This fixes writes out of bounds.
Reported-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
CC: libav-stable@libav.org
Signed-off-by: Martin Storsjö <martin@martin.st>
Previously, we returned 0, meaning successful decoding but 0
bytes consumed, leading to an infinite loop.
Reported-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
CC: libav-stable@libav.org
Signed-off-by: Martin Storsjö <martin@martin.st>
If the input buffer contains more data after the deflate stream,
the loop previously left running infinitely, with inflate returning
Z_STREAM_END.
Reported-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
CC: libav-stable@libav.org
Signed-off-by: Martin Storsjö <martin@martin.st>
This avoids setting a negative number of frames, ending up with a
negative average frame rate.
Reported-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
CC: libav-stable@libav.org
Signed-off-by: Martin Storsjö <martin@martin.st>
If a zero-length video packet is to be returned, just return
AVERROR(EAGAIN) and switch back to the audio stream.
Reported-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
CC: libav-stable@libav.org
Signed-off-by: Martin Storsjö <martin@martin.st>
This avoids a division by zero for G726.
Reported-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
CC: libav-stable@libav.org
Signed-off-by: Martin Storsjö <martin@martin.st>
This avoids a division by zero.
Reported-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
CC: libav-stable@libav.org
Signed-off-by: Martin Storsjö <martin@martin.st>
In lpc_prediction(), we write up to array element 'lpc_order' in
an array allocated to hold 'max_samples_per_frame' elements.
Reported-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
CC: libav-stable@libav.org
Signed-off-by: Martin Storsjö <martin@martin.st>
Even if the sample rate is valid, an invalid bitrate could
pass the mode combination test below.
CC: libav-stable@libav.org
Signed-off-by: Martin Storsjö <martin@martin.st>
This avoids divisions by zero later (and possibly assertions in
time base scaling), since an invalid rate_flag combined with an
invalid bitrate below could pass the mode combination test.
Reported-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
CC: libav-stable@libav.org
Signed-off-by: Martin Storsjö <martin@martin.st>
The le argument is passed so the function has the same prototype as the
other similar functions. It is otherwise unused
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
This allows supporting files for which the image stride is smaller than
the max. block size + number of subpel mc taps, e.g. a 64x64 VP9 file
or a 16x16 VP8 file with -fflags +emu_edge.
* commit '38e15df1489d86c016515223ee693e7d0326c56a':
avframe: note that linesize is not the usable data size
Conflicts:
libavutil/frame.h
Merged-by: Michael Niedermayer <michaelni@gmx.at>
For cases when plugin does not return any samples we just return
input samples. Previously channel layout for outlink was not set.
Set it explicitly instead.
Signed-off-by: Paul B Mahol <onemda@gmail.com>
* qatar/master:
lxf: check the nb_streams instead of relying on padding
Conflicts:
libavformat/lxfdec.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '06ebc0bf9a6401733a4ce1310325de19f631819a':
lavf: Allocate arrays with av_realloc if they will be realloced later
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '5c53bf7aaf03748464cbf978bffe7ffdb71112b1':
http: Pass options through to the nested protocol
Conflicts:
libavformat/http.c
See: b6f435fbc8
Merged-by: Michael Niedermayer <michaelni@gmx.at>
When av_reallocp fails, the associated variables that keep track of
the number of elements in the array (and in some cases, the
separate number of allocated elements) need to be reset.
Not all of these might technically be needed, but it's better to
reset them if in doubt, to make sure variables don't end up
conflicting.
Signed-off-by: Martin Storsjö <martin@martin.st>
Also add options for specifying a certificate and key, which can
be used both when operating as client and as server.
Partially based on a patch by Peter Ross.
Signed-off-by: Martin Storsjö <martin@martin.st>
When passing a dict to the nested protocol, it will consume
the used options from it, so a separate copy needs to be used
when reopening the connection multiple times.
Signed-off-by: Martin Storsjö <martin@martin.st>
A file containing the trusted CA certificates needs to be
supplied via the ca_file AVOption, unless the TLS library
has got a system default file/database set up.
This doesn't check the hostname of the peer certificate with
openssl, which requires a non-trivial piece of code for
manually matching the desired hostname to the string provided
by the certificate, not provided as a library function.
That is, with openssl, this only validates that the received
certificate is signed with the right CA, but not that it is
the actual server we think we're talking to.
Verification is still disabled by default since we can't count
on a proper CA database existing at all times.
Signed-off-by: Martin Storsjö <martin@martin.st>
Values outside would not be possible due to limitations of jpeg itself
Fixes very long running loop
Fixes Ticket2977
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
The only use case of it was the selftest code, and there the slightly more
complex indexing that is needed after its removial doesnt matter.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* commit '2725f2d40315b56f17c5dffe39dda7d94786302d':
doc/filters: fix an option name in the unsharp docs
Conflicts:
doc/filters.texi
See: b7b72963e0
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'cab8c5f8e140c96ba3725ab709d823abfd1e31a5':
h264: do not reinitialize the global cabac tables at each slice header
See: 1e2e2c8095
Merged-by: Michael Niedermayer <michaelni@gmx.at>
This fixes compilation with MSVC and ICL, and makes ffhash consistent
with how the rest of the codebase uses read().
Reviewed-by: Derek Buitenhuis <derek.buitenhuis@gmail.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* qatar/master:
lavc: add support for interleaved chroma formats to libx264.
Conflicts:
libavcodec/libx264.c
See: 283fb76d3d
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '71cabb521ac397db3903011d2de7afd3e0fc7ab6':
h264: do not discard NAL_SEI when skipping frames
Conflicts:
libavcodec/h264.c
See: 7d75fb381b
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '5f24fe82e5fcf227abb5ebf62aa9bc246fda8c0d':
mpegvideo: Initialize chroma_*_shift and codec_tag even if the size is 0
Conflicts:
libavcodec/mpegvideo.c
The chroma_*_shift and codec_tag code was not under a size!=0 check in ffmpeg
Merged-by: Michael Niedermayer <michaelni@gmx.at>
This fixes breakage in a few fate tests on certain setups
(that for some reason didn't break on OS X) after the previous
commit (8812a8057). Currently, some video streams are initialized
in ff_MPV_common_init with width/height set at 0 and only changed
to a proper video size with ff_MPV_common_frame_size_change later.
The breakage was diagnosed by Anton Khirnov.
Signed-off-by: Martin Storsjö <martin@martin.st>
Qansi-alias worked on 12.x, then caused miscompilation on 13.x, but now
works again passing all FATE tests for icl version 14.
Signed-off-by: Diego Biurrun <diego@biurrun.de>
* qatar/master:
h263dec: Remove a hack that can cause infinite loops
Conflicts:
libavcodec/h263dec.c
See: d2981b8ef1
Merged-by: Michael Niedermayer <michaelni@gmx.at>
This may improve compatibility of lgpegs generated by libavcodec
also encoded ljpegs become slightly smaller
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
The actual usefulness of the hack is not known, and it does cause
infinite loops with some broken input files.
CC: libav-stable@libav.org
Signed-off-by: Martin Storsjö <martin@martin.st>
* cigaes/master:
lavfi/dualinput: reimplement on top of framesync.
lavfi: add an API to synchronize multiple video inputs.
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* qatar/master:
movenchint: Clear size and len if the realloc failed
Conflicts:
libavformat/movenchint.c
See: 63621762ec
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Fix warning:
ffprobe.c:1684:21: warning: ‘start’ may be used uninitialized in this function [-Wmaybe-uninitialized] end = start + interval->end;
The warning is a false positive, since the variable is accessed only if
has_start is set, and in that case start has been already set.
* commit '5e25fdbfe01635cfc650ac4adc27d434b2df0d64':
vc1dec: Make sure last_picture is initialized in vc1_decode_skip_blocks
See: 09de0ffeab
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'ede508443e4bf57dc1e019fac81bf6244b88fbd3':
vc1dec: Fix leaks in ff_vc1_decode_init_alloc_tables on errors
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '91be1103fd1f79d381edf268c32f4166b6c3b6d8':
wnv1: Make sure the input packet is large enough
Conflicts:
libavcodec/wnv1.c
See: f23a2418fb
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'f1eac2b8a0370b908cd691086d11f51342054730':
movenc: Use keyframes as default fragmentation point in ismv
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'a9553bbb336a7186c62b3b14a0499c1b6ba61ebd':
movenc: Set all implicit flags immediately in mov_write_header
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '187023f6b2b43966acb2449a379b4ededdc4b22e':
movenc: Set mov->mode earlier in mov_write_header
Conflicts:
libavformat/movenc.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '5055035670bd1a1eaca64bd3bc71fb07de9df2c3':
tls: Do not abort on non-fatal TLS alerts with gnutls
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Remove can_safely_read() as its not really needed with
checked bitstream reader.
Fixes#2984.
Reported-by: Piotr Bandurski <ami_stuff@o2.pl>
Signed-off-by: Paul B Mahol <onemda@gmail.com>
Previously, s->context_initialized was left set to 1
if ff_vc1_decode_init_alloc_tables failed, skipping the
initialization completely on the next decode call.
Reported-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
CC: libav-stable@libav.org
Signed-off-by: Martin Storsjö <martin@martin.st>
For codecs where decoding of a whole plane can simply
be skipped, we should offer applications to not decode
alpha for better performance (ca. 30% less CPU usage
and 40% reduced memory bandwidth).
It also means applications do not need to implement support
(even if it is rather simple) for YUVA formats in order to be
able to play these files.
Signed-off-by: Reimar Döffinger <Reimar.Doeffinger@gmx.de>
Issues with the code:
1) The skip_bits_long breaks packed B-frames since we skip
of the packed frame, even for VDPAU.
2) Calling ff_h263_find_resync_marker_reverse is nonsense for MPEG-4,
and for H.263 the only code using this (vaapi_mpeg4) explicitly reverts
this change!
3) mb_x/mb_y are always 0 when vaapi_mpeg4_decode_slice, so doing
computations with them is just obfuscation
4) due to not updating mb_y the code would always go into the error
resilience case, causing nonsense error messages and maybe further
issues.
While tested to fix the data provided to the decoder in case of
VDPAU so it is the same as for the non-hwaccel code, the VA-API code
was not tested to still work, and adding regression testing even
as a quick hack is much more complicated for it.
Signed-off-by: Reimar Döffinger <Reimar.Doeffinger@gmx.de>
Fragmenting blindly to a certain duration isn't a good choice
if one should be able to switch between different qualities,
therefore default to keyframes instead.
Signed-off-by: Martin Storsjö <martin@martin.st>
This makes sure other sanity checks for conflicting options
can work properly, e.g. for the conflict between the faststart
flag when using the ismv mode.
Signed-off-by: Martin Storsjö <martin@martin.st>
Use update_offset() as done for rtmp audio, video and notifications and
read update and write the fields instead of replacing them in the rtmp
packet and then memcpying it to the output buffer.
And fix the AMF_DATA_TYPE_ARRAY parsing while at it.
A MIXEDARRAY type, as the ARRAY, store the number of elements in
an uint32 before the list. The ARRAY is strict and does not have
an OBJECT terminator, MIXEDARRAY behaves like an OBJECT type and
a different than stated number of element can be present.
Currently the code can in some cases draw tiles that hang outside the
allocated buffer. This patch increases the buffer size to avoid out
of array accesses. An alternative would be to fail if such tiles are
encountered.
I do not know if any valid files use such hanging tiles.
Fixes Ticket2971
Found-by: ami_stuff
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Use it only on subtitle CuePoints.
With proper demuxer/splitter support this should improve the display
of subtitles right after seeking to a given point in the stream.
Signed-off-by: James Almer <jamrial@gmail.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Avoid overwriting the bitstream buffer data before we
have ended processing the frame.
This is necessary to fix hwaccels which might try to use
the buffer during the end_frame call.
I am not sure but it is possible this could even trigger
a use-after-free if the av_fast_malloc allocated a new buffer.
This would require that decode_slice did not wind the bitstream
forward all the way to the end, which does not currently happen in
normal streams.
Signed-off-by: Reimar Döffinger <Reimar.Doeffinger@gmx.de>
The specification does not allow multiple bits to be set,
but some encoders do it anyway.
Applying it only to the first seems to give better results.
Signed-off-by: Reimar Döffinger <Reimar.Doeffinger@gmx.de>
The 32-bit integer accumulator in MSE computation can overflow for 8-bit frame data.
(e.g., for 1080p white frame compared to a black frame can give sum of 255*255*1080*1920 > 2^32).
Signed-off-by: Neil Birkbeck <neil.birkbeck@gmail.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* qatar/master:
h264: remove an unused static constant
Merge only for metadata as the constant us not unused in ffmpeg
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'b97b1adb3f807e1acd00d56319ee6cb41cc727e4':
rtmpproto: Add a comment explaining the logic in handle_notify
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '83c285f88016b087c2f0f4b9ef356ad8ef12d947':
wtv: Add more sanity checks for a length read from the file
Conflicts:
libavformat/wtv.c
See: c42efad3c3
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'd8b68660145c76a23fc9665f96932449514ecad2':
yop: Clear all references to the AVBuffer in the local AVPacket
Conflicts:
libavformat/yop.c
See: 551f683861
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '3185a80259ce1f8f8111073dbd14a69a396e03a3':
fraps: Make the input buffer size checks more strict
Conflicts:
libavcodec/fraps.c
The added checks are mostly to handle duplicate frames, which
we discard, thus there are also no P frames for example.
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '82e266c6d3fbf3cc74e515b883e66543381a0f2c':
segafilm: Validate the number of audio channels
Merge only for metadata as the change is incorrect, checking audio
parameters in video only files
See: 192db16b9c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Prior to this on msvc/icl there was no handling of deprecated functions
and the deprecated warning was disabled.
After enabling there are a number of warnings relating to the CRT and
the use of the non-secure versions of several functions. Defining
_CRT_SECURE_NO_WARNINGS silences these warnings.
Signed-off-by: Martin Storsjö <martin@martin.st>
* commit '601c2015bc16f0b281160292a6a760cbbbb0eacb':
svq3: Avoid a division by zero
Conflicts:
libavcodec/svq3.c
See: 4fa706a4a6
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '7a5a55722749a3ab77941914707277b147322cbe':
qpeg: Add checks for running out of rows in qpeg_decode_inter
Conflicts:
libavcodec/qpeg.c
See: 4299dfa5de
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'e9d61de96c113ee0ef8082833c7e682df0e23eec':
mpegaudiodec: Validate that the number of channels fits at the given offset
Conflicts:
libavcodec/mpegaudiodec.c
See: 51fcf276f8
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'f50803354c6acb4575379d7c54ca48ec5d36dd61':
asvdec: Verify the amount of extradata
See: 605f2b6b00
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '72fe16a13e3ebd5396ac173bf84c8b20085c16d5':
movenc: Use null buffers for measuring the amount of data to be written
Conflicts:
libavformat/movenc.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '09f3c937ed6fd7c5bd64450d45f73b0f4975f4c9':
asfenc: remember send time and offset of the index entries
Conflicts:
libavformat/asfenc.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '1eb932803037a3c9f98f66aeb80024dfa3c5c743':
asfenc: add ASF_Reserved_4 as defined in section 10.10 of the ASF spec
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '5f408333601a827054335f309defcb246a532b21':
asfdec: substract preroll time from marker presentation time
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Minor change to fix for Trac #1003 to avoid squawking about files
with valid keyframes that aren't marked (as opposed to frames that are
marked as keyframes and aren't).
Change correctly surpresses the spurious warnings, while still complaining
about (and handling) the genuinely broken file attached to bug #1003.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Also make sure the existing length check can't overflow.
Reported-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
CC: libav-stable@libav.org
Signed-off-by: Martin Storsjö <martin@martin.st>
This makes sure that it doesn't try to free an AVBuffer belonging
to an earlier packet when we free the local packet at the end.
Reported-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
CC: libav-stable@libav.org
Signed-off-by: Martin Storsjö <martin@martin.st>
This avoids divisions by zero later.
Reported-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
CC: libav-stable@libav.org
Signed-off-by: Martin Storsjö <martin@martin.st>
If the height is zero, the decompression will probably end up
failing due to not fitting into the allocated buffer later
anyway, so this doesn't need any more elaborate check.
Reported-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
CC: libav-stable@libav.org
Signed-off-by: Martin Storsjö <martin@martin.st>
The init function reads one byte of extradata.
Reported-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
CC: libav-stable@libav.org
Signed-off-by: Martin Storsjö <martin@martin.st>
Null buffers are useful for simulating writing to a real buffer
for the sake of measuring how many bytes are written.
Signed-off-by: Martin Storsjö <martin@martin.st>
ASF markers only have a start time, so we lose the chapter end times,
but that is ASF for you
Signed-off-by: Vladimir Pantelic <vladoman@gmail.com>
Signed-off-by: Anton Khirnov <anton@khirnov.net>
this was forgotten when we changed ASF to not output the preroll time
Signed-off-by: Vladimir Pantelic <vladoman@gmail.com>
Signed-off-by: Anton Khirnov <anton@khirnov.net>
The deallocated memory contains resources that need to be freed before it
can be deallocated. The original code was correct.
This also fixes a double free
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'bcbe4f3ceb6ee0210d3a401963518906c8b9b230':
idroqdec: Make sure a video stream has been allocated before returning packets
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '5372cda67109848d22146289e401669266217e80':
rv10: Validate the dimensions set from the container
This check could be replaced by a width==0||height==0
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'c4bfa098072ba338d83555d6e2199f7e1e64ffff':
Add a WebP decoder
Conflicts:
Changelog
doc/general.texi
libavcodec/Makefile
libavcodec/avcodec.h
libavcodec/version.h
libavformat/img2.c
The previously existing webp decoder is disabled as the new
one supports lossless mode and alpha while the previous does not.
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '9ae53c5860e17d087642d27b00dade071970a2e7':
lavc: add ff_u8_to_s8() for safe type punning of uint8_t to int8_t
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '0f310a6f333b016d336674d086045e8473fdf918':
rmdec: Validate the fps value
Conflicts:
libavformat/rmdec.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Files won't validate with mkvalidtor if these two elements are missing.
Use a const "Lavf" string that wont change with library version bumps.
Signed-off-by: James Almer <jamrial@gmail.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* qatar/master:
movenc: Add an option for omitting the tfhd base offset
Conflicts:
libavformat/version.h
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'd4c2a3740fb95f952a87ba320d2bf31f126bdf68':
xmv: Add more sanity checks for parameters read from the bitstream
Conflicts:
libavformat/xmv.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'dc4acc820076b2149ef6c921bdabe05d07ca1bc6':
rtmpproto: Extend a comment to explain the prev_pkt arrays roles
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '647d655d19c38e9716328e4787199149097d6089':
rtmpproto: Consistently use the right prev_pkt array
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Abort if it is invalid if strict error checking has been requested.
Reported-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
CC: libav-stable@libav.org
Signed-off-by: Martin Storsjö <martin@martin.st>
* commit '18a245a2aea31b92bc435f2962a71e060d83b5f7':
jpeg2000dec: Add more checks when parsing headers
The check cannot be true in FFmpeg, but does no harm.
I will move it in a subsequent commit so it can detect missing SIZ
Merged-by: Michael Niedermayer <michaelni@gmx.at>
With some (buggy) drivers, the VIDIOC_G_STD ioctl returns a std_id that cannot
be matched with any of the enumerated v4l2_standard structures (for example
std_id = 0 or std_id = 0xffffff). Do not fail when we reach the end of the
enumeration without a valid match.
Fixes ticket #2370
Note: This commit message has been modified by Giorgio Vazzana, the original
commit message was:
"Fixed regression for mandatory VIDIOC_ENUMSTD support by v4l2"
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
This makes the output fragments independent of their position in
the output stream, making the output work better when streamed.
QuickTime Player doesn't support fragmented mp4 without the base
data offset, though.
Signed-off-by: Martin Storsjö <martin@martin.st>
This is a bit more work, but avoids having to fill in
the data offset field afterwards instead of directly when
the rest of the trun atom is written.
This simplifies future cases where this field needs to be set to
something different.
Signed-off-by: Martin Storsjö <martin@martin.st>
This is required, since invalid parameters actually could
pass the switch check below.
Reported-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
CC: libav-stable@libav.org
Signed-off-by: Martin Storsjö <martin@martin.st>
A given packet won't always come in contiguously; sometimes
they may be broken up on chunk boundaries by packets of another
channel.
This support primarily involves tracking information about the
data that's been read, so the reader can pick up where it left
off for a given channel.
As a side effect, we no longer over-report the bytes read if
(toread = MIN(size, chunk_size)) == size
Signed-off-by: Martin Storsjö <martin@martin.st>
Since the number of channels is multiplied by 36 and assigned to
to a uint16_t, make sure this calculation didn't overflow. (In
certain cases the calculation could overflow leaving the
truncated block_align at 0, leading to divisions by zero later.)
Reported-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
CC: libav-stable@libav.org
Signed-off-by: Martin Storsjö <martin@martin.st>
A change in framesize caused a perpetual loss of synchronization.
So read (and use) the frame size from the frame header instead of
setting it only once.
Signed-off-by: Diego Biurrun <diego@biurrun.de>
It's not our responsibility to account for other projects'
terrible hacky usage.
Also, it is no longer needed by XMBC, since 78b71d4.
Signed-off-by: Derek Buitenhuis <derek.buitenhuis@gmail.com>
Previously this would have lead to a memcpy(a,a) which violates the
requirement of non overlapping src and dst.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'b1db33159fdc2da4bdd8c75e4ff9a7dd0ef2f0c2':
ffv1: Make sure at least one slice context is initialized
Conflicts:
libavcodec/ffv1.c
This condition is not possible in ffmpegs ffv1 code and already
checked for by assert() for the case that some future changes make it possible.
Thus merge just for meta-data
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'ea78a348d86a3a733f6c1e0a65cfdd8283d924b9':
eacmv: Make sure a reference frame exists before referencing it
Conflicts:
libavcodec/eacmv.c
See: 113d7be624
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'c39f7eba01cd656e8f0eed592f93d11814736650':
truemotion2: Use av_freep properly in an error path
Conflicts:
libavcodec/truemotion2.c
See: c54aa2fb0f
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'a92538b7c0defc86c55fb91f55dfa36aad192673':
ivi_common: Make sure color planes have been initialized
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '7f8d41eb097e8d4223c9caf97dd332a2fdb29d52':
mov: Don't use a negative duration for setting other fields
Conflicts:
libavformat/mov.c
See: 87d073eacc
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '19b9659f3174599e8685d329c4330b1ea8c4c6db':
oggparseogm: Convert to use bytestream2
Conflicts:
libavformat/oggparseogm.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '711c970168297683860422e95d6b7e37ee3c8367':
rv34: Check the return value from ff_rv34_decode_init
Conflicts:
libavcodec/rv30.c
libavcodec/rv40.c
See: b86651a208
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'e1f3847f860a1094a46be4c5f10db8df616c3135':
mace: Make sure that the channel count is set to a valid value
Conflicts:
libavcodec/mace.c
See: 6df1cfa7e4
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '1115689d54ea95a084421f5a182b8dc56cbff978':
svq3: Check for any negative return value from ff_h264_check_intra_pred_mode
Conflicts:
libavcodec/svq3.c
See: 019eb2c77b
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'd4aef997809167832ecc64e89dda8cb445e5fe10':
rtmp: Follow Flash player numbering for channels.
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '68b467742092364f9306283f40effde2c12efe08':
lavf: Make probe_codec return an error code
Conflicts:
libavformat/utils.c
A failure to reallocate should not free the array as it is used
to probe the codec. And failure to reallocate if the following
probe succeeds isnt a fatal error for probe_codec(). Thus this
is only partially merged to ensure probing still is attempted
with the data available.
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '73084391588b0f150737990038829cac5013dd68':
lavf: Don't explicitly flush after each written packet in muxers
Conflicts:
libavformat/assenc.c
libavformat/yuv4mpeg.c
See: 8de9bb6e5e
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '596e5d4783ca951258a7c580951fd161f1785ec1':
lavf: Add a flag to enable/disable per-packet flushing
Conflicts:
libavformat/avformat.h
libavformat/mux.c
libavformat/version.h
This adds a 2nd API to set per packet flushing
If the user application indicates through either a non default then this non default takes
precedence over the other still default value
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'fe0337e89bbbe84b7274fbb0d9d56ed992937931':
rtmp: Do not send the first field twice within the handshake
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '187105ff8a02bafc9c58d9d8363bb3f55a415635':
Fix references to deleted avcodec_encode_video() function
Merged-by: Michael Niedermayer <michaelni@gmx.at>
This avoids crashes when initializing the range coder for
the first slice context.
Reported-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
CC: libav-stable@libav.org
Signed-off-by: Martin Storsjö <martin@martin.st>
This is similar to an existing check for the second-last frame
from 062421e3.
Reported-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
CC: libav-stable@libav.org
Signed-off-by: Martin Storsjö <martin@martin.st>
This avoids a potential division by zero.
Reported-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
CC: libav-stable@libav.org
Signed-off-by: Martin Storsjö <martin@martin.st>
Some files have the duration set to -1 in the mdhd atom, more
or less legitimately. (We produce such files ourselves, for the
initial duration in fragmented mp4 files.)
Reported-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
CC: libav-stable@libav.org
Signed-off-by: Martin Storsjö <martin@martin.st>
Also return a proper error code.
Reported-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
CC: libav-stable@libav.org
Signed-off-by: Martin Storsjö <martin@martin.st>
Also pass on any returned error code.
Reported-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
CC: libav-stable@libav.org
Signed-off-by: Martin Storsjö <martin@martin.st>
This more closely corresponds to the usage of the field.
Its usage here is unrelated to the channel ID.
Signed-off-by: Martin Storsjö <martin@martin.st>
Channel 4 is typically used by the Flash player to transmit
audio, channel 6 for video, and various stream-specific invokes
get sent over channel 8, which is designated the source channel.
This more closely matches the behavior of the Flash player,
including the transmission of play requests over channel 8.
Signed-off-by: Martin Storsjö <martin@martin.st>
Sending non-monotonic packets (e.g. when the audio and video
streams are monotonic within themselves but not muxed
monotonically) will lead to negative values the RTMP timestamp
field (where timestamps are transmitted only as deltas for each
channel), and this delta can end up being incorrectly written as
a large unsigned number.
Signed-off-by: Martin Storsjö <martin@martin.st>
Re-wording a log message that's no longer true and changing its
severity level to debug.
Signed-off by: Vignesh Venkatasubramanian <vigneshv@google.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Since 596e5d4783, this is not necessary anymore. It also allows to
actually disable the flushing, improving write performance (but
possibly giving worse latency in real-time streaming).
Signed-off-by: Martin Storsjö <martin@martin.st>
This is enabled by default and can be disabled with
"-fflags -flush_packets".
Inspired by a patch from Nicolas George <nicolas.george@normalesup.org>.
Signed-off-by: Martin Storsjö <martin@martin.st>
Adding support for end trimming Opus embedded in Ogg container.
Signed-Off By: Vignesh Venkatasubramanian <vigneshv@google.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'ac9d159015a88aa2721b271875d18482f713f354':
proresdec: Properly make sure an index doesn't run past the limit
Conflicts:
libavcodec/proresdec_lgpl.c
See: 30df9789a9
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'e90a6846c2c006fbebd00e1f2789f4a86fafacef':
cavsdec: Make sure a sequence header has been decoded before decoding pictures
See: ec0965be36
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '342c43d154e586bc022c86b168fe8d36f69da9d3':
omadec: Properly check lengths before incrementing the position
See: f1d6f013b2
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'a06a5b78e2c3bd2e12aff0627a3b65c6fee555a5':
mathops/x86: work around inline asm miscompilation with GCC 4.8.1
See: 659df32a9d
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Previously the wrong buffer pointer was checked, when buf
instead of *buf was checked. But checking the return value
instead is even better.
Reported-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
CC: libav-stable@libav.org
Signed-off-by: Martin Storsjö <martin@martin.st>
If idx equaled num_coeffs - 1 on entry to the loop, the previous
check failed to break out of the loop.
Reported-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
CC: libav-stable@libav.org
Signed-off-by: Martin Storsjö <martin@martin.st>
If we really want to support parameter changes, they need to be
signalled along with the AVPackets as parameter change side data,
not just changing the AVCodecContext parameters when a packet
is demuxed (since there may be other earlier packets yet undecoded).
Something similar was already done for the sample rate in 0883109b2,
but some parameters were left changeable.
This avoids having to recheck the channel count for validity for
each decoded frame in (ad)pcm decoders, unless the decoders
explicitly say that they accept parameter changes.
Reported-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
CC: libav-stable@libav.org
Signed-off-by: Martin Storsjö <martin@martin.st>
Limit the size to INT_MAX/2 (for simplicity) to be sure that
size + BYTES_PER_FRAME_RECORD won't overflow.
Also factorize other existing error return paths.
Reported-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
CC: libav-stable@libav.org
Signed-off-by: Martin Storsjö <martin@martin.st>
The volatile is not required here, and prevents a miscompilation with GCC
4.8.1 when building on x86 with --cpu=i686
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Signed-off-by: Derek Buitenhuis <derek.buitenhuis@gmail.com>
This fixes the hypothetical case of rounding errors causing
incorrect values to be used.
We do not use *_EPSILON, because non trivial expressions can contain
errors larger than that making a zero equality test with *_EPSILON
unreliable.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
The muxer has been creating files with v4 elements for some time now,
and especially now that we can mux non-experimental Opus files, reporting
the DocTypeVersion as 2 is not correct.
Signed-off-by: James Almer <jamrial@gmail.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
FFV1 version 1.3 is non-experimental as of Aug 26, 2013. Adding that to the changelog.
Signed-Off By: dericed <dave@dericed.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
The sample buffering logic does not take into account that the blocksize
could change. Reset the buffer if the channel configuration changes,
since if there are leftover samples, it is most likely a broken or
misconcatenated stream. This could lead to negative numbers for
missing_samples during decoding.
Thanks to Michael Niedermeyer for pointing these out.
Its the width in bytes and not the linesize or stride.
This makes the naming more consistent with the rest of the codebase
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
This reverts commit 51dab60c7b.
this fixed nothing, and was just the result of assuming that the
variable named linesize was the linesize. Its not, its the width
in bytes which was already correct.
Found-by: durandal_1707
Removing the /EXPERIMENTAL suffix for codec id field for Opus. Doing this
as the implementation of embedding Opus in Matroska is complete.
Signed-Off By: Vignesh Venkatasubramanian <vigneshv@google.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Next release of ffmpeg will support embedding Opus in Matroska
container. Adding that to the Changelog.
Signed-Off By: Vignesh Venkatasubramanian <vigneshv@google.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* cehoyos/master:
Set bits_per_raw_sample when reading j2k frames.
libopenjpegdec.c: Correctly scale gray16 output if precision < 16
Use rc_max_rate if no video bit_rate was specified when muxing mxf_d10.
Store the video bit_rate in the context when muxing mxf.
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* qatar/master:
matroskaenc: Fix stray pointers left over from av_reallocp_array refactoring
Conflicts:
libavformat/matroskaenc.c
Mostly not merged as the buggy code was no longer part of FFmpeg
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'e2cd766ca1b9bb2ba72aca5f6ba5d8be15743984':
configure: Mention that icl does not build both static and shared libs
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'b1e469885362febce3d9a4678624e44a92f77da9':
g2meet: Allocate cursor buffers large enough to fit the aligned width
See: 3c4c5ca1c1
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '17d57848fc14e82f76a65ffb25c90f2f011dc4a0':
mpc8: Make sure the first stream exists before parsing the seek table
Conflicts:
libavformat/mpc8.c
See: 69fb605ad5
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '0d61f260010707f3028b818e8b24598e1a83d696':
zmbvdec: Check the buffer size for uncompressed data
Conflicts:
libavcodec/zmbv.c
See: 44c23aa1b8
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '183b9d843a9533774fabd3984a52f3987001acbc':
ape: Don't allow the seektable to be omitted
See: e7cb161515
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'b26742cc308552f242ee2bf93b07a3ff509f4edc':
shorten: Break out of loop looking for fmt chunk if none is found
See: 5e9a56a035
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '49568851bf1700e3d9ea9cda29208d0df3c2c38b':
shorten: Use a checked bytestream reader for the wave header
Conflicts:
libavcodec/shorten.c
See: 5e9a56a035
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'f3d57dc69145f1b7acb4870da9ce60378190a1fd':
smacker: Free memory properly if the init function fails
Conflicts:
libavcodec/smacker.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '0679cec6e8802643bbe6d5f68ca1110a7d3171da':
smacker: Make sure we don't fill in huffman codes out of range
Conflicts:
libavcodec/smacker.c
See: 1285baaab5
the added test is redundant but will be used after future refactoring
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '48d6556dd46d4f4fac10d0f4a819e314887cd50e':
dsicin: Add some basic sanity checks for fields read from the file
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '5045f6bdfabfa5d3374756d2c23f762fb042acae':
configure: Fix wrong reference to user support mailing list
Conflicts:
configure
No change as the reference was not wrong in ffmpeg
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Limit the size to INT_MAX/2 (for simplicity) to be sure that
size + FF_INPUT_BUFFER_PADDING_SIZE won't overflow.
Reported-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
CC: libav-stable@libav.org
Signed-off-by: Martin Storsjö <martin@martin.st>
Also don't pointlessly set the buffer size to 1 after copying
one packet.
Reported-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
CC: libav-stable@libav.org
Signed-off-by: Martin Storsjö <martin@martin.st>
The seektable is required for filling in ape->frames[i].pos
further down.
Reported-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
CC: libav-stable@libav.org
Signed-off-by: Martin Storsjö <martin@martin.st>
avcodec_find_best_pix_fmt2 does not modify its first argument so may be
marked const. This avoids a warning when passing in AVCodec.pix_fmts.
Signed-off-by: Dylan Simon <dylan@dylex.net>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
The caller does not expect this, and in case of adding new streams would then
not even be able to deallocate them anymore.
This reverts a hunk from "avformat: Use av_reallocp_array() where suitable"
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
The caller does not expect this and there are variables left that index to otherwise
deallocated data.
This reverts a hunk from "avformat: Use av_reallocp_array() where suitable"
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Adds the end trimming value (duration to be trimmed from the end
of the file due to padding) to the packet's side data. This is
then made use by the muxer to put the value in the container.
Signed-off-by: Vignesh Venkatasubramanian <vigneshv@google.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Implementing support for end trimming Opus in Matroska by making
use of the DiscardPadding value from the container and discarding
the samples accordingly.
Signed-off-by: Vignesh Venkatasubramanian <vigneshv@google.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Adding support for discarding samples from the end based on the value in
AV_PKT_DATA_SKIP_SAMPLES side data's bytes 5-8.
Signed-off By: Vignesh Venkatasubramanian <vigneshv@google.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* commit '8b524ab0c43c1767919530abb79d3656113cdc47':
movenc: Add a warning message if conflicting options have been specified
Conflicts:
libavformat/movenc.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'a6a4596e12192375e1d9dffeae24d6d4c41b25c1':
tcp: Explicitly convert a pointer to a boolean integer
Conflicts:
libavformat/tcp.c
See: 22fbc7f8be
Merged-by: Michael Niedermayer <michaelni@gmx.at>
In order to represent the codec delay accurately in Matroska, a
new element CodecDelay has been introduced. It contains the
overall delay added by the codec in nanoseconds. This patch adds
support for muxing CodecDelay value in the container.
Matroska spec for CodecDelay element can be found here:
http://matroska.org/technical/specs/index.html#CodecDelay
Signed-off-by: Vignesh Venkatasubramanian <vigneshv@google.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Support for end trimming Opus in Matroska is implemented by using
the DiscardPadding container element in the Block data. The last
chunk is stored as a Block instead of SimpleBlock and the
trimming information is stored and used to discard samples that
were padded by the Opus codec. This patch adds support for muxing
DiscardPadding element into the container with appropriate value.
Matroska spec for the DiscardPadding element can be found here:
http://matroska.org/technical/specs/index.html#DiscardPadding
Signed-off-by: Vignesh Venkatasubramanian <vigneshv@google.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
This makes sure the faststart vs fragmentation check works as
intended when fragmentation is enabled due to using the ismv mode.
Signed-off-by: Martin Storsjö <martin@martin.st>
This fixes warnings about making integers from pointers without
a cast, and avoids the theoretical case where the lower 32 bits of
the pointer would all be zero where the implicit cast wouldn't give
the right result.
Signed-off-by: Martin Storsjö <martin@martin.st>
When compiling with --enable-small, ripemd.o will weigh a few kilobytes less than
it used to before the previous commit.
Signed-off-by: James Almer <jamrial@gmail.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
This fixes a bunch of possible overread in avformat with the idiom p +=
strcspn(p, "\n") + 1 (strcspn() can focus on the trailing '\0' if no
'\n' is found, so the +1 leads to an overread).
Note on lavf/matroskaenc: no extra subtitles.o Makefile dependency is
added because only the header is required for ff_subtitles_next_line().
Note on lavf/mpsubdec: code gets slightly complex to avoid an infinite
loop in the probing since there is no more forced increment.
In particular, print the standard supported by the selected input.
Additionally, use PRIx64 everywhere when printing standards.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* qatar/master:
lavf: fix the comparison in an overflow check
Conflicts:
libavformat/utils.c
See: a5d67bc796
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '7ee191cab0dc44700f26c5784e2adeb6a779651b':
dv: Add a guard to not overread the ppcm array
See: 3669915e93
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Some fields of the frame are changed to reflect encoder decissions like
if its a keyframe. It thus cannot be constant.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* qatar/master:
avisynth: K&R formatting cosmetics
Conflicts:
libavformat/avisynth.c
Nothing changed as the avisynth code has been rewritten to
support avi/avxsynth in ffmpeg.
And the new code should be free of formating problems.
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'befe044bb9561c9d7d6559db06bba375e82a4b66':
avcodec: Stop exporting the removed audio_resample* symbols
Conflicts:
libavcodec/libavcodec.v
Not merged as theres no pressing need to remove it now.
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'c3e6e8f06c42499bd020fd0b37f9542150e6067b':
mem: Do not check unsigned values for negative size
Conflicts:
libavutil/mem.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* qatar/master:
matroskaenc: Allow chapters to be written in trailer
Conflicts:
libavformat/matroskaenc.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
These prevent the rgb ljpeg code from being run on parameters that it doesnt
support. No testcase available but it seems possible to trigger these.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
This allows creation of frame accurate chapter marks from sources like
DVD and BD where the precise chapter location is not known until the
chapter mark has been reached during reading.
Signed-off-by: Anton Khirnov <anton@khirnov.net>
The benchmark tests the speed of the following algorithms:
MD5, SHA-1, SHA-256, SHA-512, RIPEMD-160, AES-128.
It can optionally be built to perform the same benchmark on
other crypto libraries, for comparison purposes.
The supported libraries are:
- crypto: OpenSSL's libcrypto;
- gcrypt: GnuTLS's libgcrypt;
- tomcrypt: LibTomCrypt
To enable them, use this syntax:
make VERSUS=crypto+gcrypt+tomcrypt tools/crypto_bench
They do not need to have been enabled in configure.
Currently all uses of the emu edge code as well as the code itself
assume int linesize
changing some but not changing all would introduce a security issue
once all use this typedef a simple search and replace can be
done to switch them all to ptrdiff_t
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* qatar/master:
mpegvideo: Avoid 32-bit wrapping of linesize multiplications
This is not merged as its not correct for ffmpeg and would introduce a
security issue if merged as is.
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'b4ec7a5fee644ad9882e10c097817b65447b8e55':
mem: Document the av_realloc family of functions properly
Merged-by: Michael Niedermayer <michaelni@gmx.at>
This makes sure that linesize * start_y doesn't overflow, so that
emulated_edge_mc can get back the original value if needed.
Reported-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
CC: libav-stable@libav.org
Signed-off-by: Martin Storsjö <martin@martin.st>
* commit '7f9e893f56db52078e0f46677ed337b2e25fa94d':
build: Report an error message when a pc file is not found
Conflicts:
configure
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'af11fa5409cc72fc45ca7f3527400beca10967b9':
mjpegb: Detect changing number of planes in interlaced video
Conflicts:
libavcodec/mjpegdec.c
See: ecc31630f9
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '35cbc98b720db95b923cb2d745f77bb2ee4363dc':
alac: Check that the channels fit at the given offset
Conflicts:
libavcodec/alac.c
See: b53f89710b
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'd719981273bc779c7d1e879d88404fd867f93a0e':
4xm: Check that the read track value is non-negative
Conflicts:
libavformat/4xm.c
See: 0838cfdc8a
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '5bcd3ae5b167fb74215520b01d5d810e0c8986ab':
matroskadec: Check that .lang was allocated and set before reading it
Conflicts:
libavformat/matroskadec.c
See: 01fd1aa0ad
Merged-by: Michael Niedermayer <michaelni@gmx.at>
This ensures that no read timestamp functions finds packets before the search window in ff_find_last_ts()
which could cause an infinite loop
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
This fixes an infinite loop
An alternative fix would be to revert d73cbc22c5
but that would worsen error resilience.
Found-by: Justin Ruggles
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
On openbsd the exif-image-jpg test fails but diff treats the files as
binary due to some non ascii symbols in them. This should force it to
treat them as text, which should result in more informative output
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
The code tries to decode a number of channels at the
offset given by the ff_alac_channel_layout_offsets table.
Even if the number of channels decoded so far doesn't
exceed the total number of channels, we need to check that
we actually can decode that number of channels at this offset
as well.
Reported-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
CC: libav-stable@libav.org
Signed-off-by: Martin Storsjö <martin@martin.st>
Otherwise buffer size calculations in allocate_buffers could
overflow later, making the code think a large enough buffer
actually was allocated.
Reported-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
CC: libav-stable@libav.org
Signed-off-by: Martin Storsjö <martin@martin.st>
Skip the "\r" as normal text. Otherwise it will be the first character
of the string passed to sscanf(), which then fill fail to match the
timestamps.
Signed-off-by: Clément Bœsch <u@pkh.me>
* commit '488b2984fece7ad0c2596826fee18e74aa904667':
ape demuxer: check for EOF in potentially long loops
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'a7c1689dedd11689edb30088d467ac03f9b8d1cf':
4xm: check that bits per sample is strictly positive
Merged-by: Michael Niedermayer <michaelni@gmx.at>
The check added in df33a58e53 does not work
at all, rather it broke the summing of bitrates completely.
The comparission was wrong way around.
This commit replaces it by a simpler and hopefully clearer check
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'fab694dd3931b1c0bc3c598c3f88b1902c14a303':
lavf: move a variable declaration to the block where it's used
Conflicts:
libavformat/utils.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'fe9bb61f9a16be19ad91875632c39e44b7a99a8a':
pictordec: pass correct context to avpriv_request_sample
Conflicts:
libavcodec/pictordec.c
No change as the avpriv_request_sample() has already been replaced by an implementation
of the codepath.
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '5f7aecde02a95451e514c809f2794c1deba80695':
pictordec: break out of both decoding loops when y drops below 0
Conflicts:
libavcodec/pictordec.c
The added check is redundant.
It shows the error path more clearly though
See: f3f488423a
Merged-by: Michael Niedermayer <michaelni@gmx.at>
This should improve write performance quite significantly.
---
Tested with both writing a normal mp4, by using the faststart
feature and writing a fragmented mp4 file; all turn out with the
same md5sum as before.
Signed-off-by: Martin Storsjö <martin@martin.st>
Fixes Ticket2896
An alternative to this would be to change the code to support any
stride.
The condition of differing strides should be rare.
If theres no speedloss supporting any stride would be better
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Fixing av_packet_copy_side_data to work correctly when source and
destination are the same. This makes sure that there is no memory
leak and double frees.
Signed-off by: Vignesh Venkatasubramanian <vigneshv@google.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Otherwise picmemset can get called with negative y, resulting in an
invalid write.
Reported-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
CC: libav-stable@libav.org
This moves some allocations to init, reducing possible failure modes in update.
Always copies from the previous context instead of just during init
Fixes Ticket2923
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
The pixel format descriptors are set to more or less arbitrary
values as bayer formats do not fit in the descriptors structure.
These values are currently not used for bayer formats and thus
do not matter.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
The pixel format tables are never modified, mark them as constant.
Signed-off-by: Diego Elio Pettenò <flameeyes@flameeyes.eu>
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
Remove the header decoding for PCM audio from mpeg.c and the
20/24bit parts from pcm.c and merge them into a new decoder in
pcm-dvd.c.
The decoder has added support for samples that span multiple
packets and modified 20/24bit group decoding. Both is needed to
decode samples that have been generated with DVD-Lab Pro 2. The
decoding of 16bit PCM and two channel 24bit is identical to
before. No other samples are known to verify the correctness of
the encoding this software does.
The complete list of tested formats is
48kHz/16bit/2-8 channels
48kHz/24bit/2-5 channels
96kHz/16bit/2-4 channels
96kHz/24bit/2 channels
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
The original idea was to collect PCM codecs that could appear in various
MPEG streams in this file. Discussion in IRC lead to the conclusion that
one codec per file would be better and stop the need for #ifdefs.
* commit '6369ba3c9cc74becfaad2a8882dff3dd3e7ae3c0':
x86: avcodec: Use convenience macros to check for CPU flags
Conflicts:
libavcodec/x86/dsputil_init.c
libavcodec/x86/hpeldsp_init.c
libavcodec/x86/motion_est.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '79aec43ce813a3e270743ca64fa3f31fa43df80b':
x86: Add and use more convenience macros to check CPU extension availability
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'a6b650118543e1580e872896d8976042b7c32d01':
ppc: cosmetics: Consistently format CPU flag detection invocations
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Files starting with B frames in presentation order generated the
"no keyframe" warning before this change.
Based on patch by: Robert Krüger <krueger@lesspain.de>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* commit '7ffda66fd5c81af4725bff7c2c4f207ba2aa0613':
arm: float_dsp: Propagate cpu_flags to vfp initialization function
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '1909f6b1b6da2db371c179bed5a19aaf979b7557':
swscale: cosmetics: Drop silly camelCase from swScale function pointer name
Conflicts:
libswscale/swscale_unscaled.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '70dd8892bf00923af838756dfbb356a9b1e4e40d':
mpegvideo: Replace arch initialization ifdeffery by standard conditionals
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'f61bece684d9685b07895508e6c1c733b5564ccf':
ppc: Add and use convenience macro to check for AltiVec availability
Conflicts:
libavcodec/ppc/dsputil_ppc.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'b78b10c4b78b696927f2801cf2d9f193b4eff28b':
avutil: Move internal CPU detection function declarations to private header
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '91d4cfb8127f1de6c4ad173a30fffe584700046d':
apedec: do not buffer decoded samples over AVPackets
Conflicts:
libavcodec/apedec.c
See: 77d89a5b16
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '84146963d23d76b09af633e97413cd97d9b3021e':
configure: x86: Fix handling of i686 and cpunop features
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'cb8f70c96e14c1b4824ef23d21d78d10fc5a4b93':
vf_fps: use double constants for default/min/max for start_time
Conflicts:
libavfilter/vf_fps.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Only consume an AVPacket when all the samples have been read.
When the rate of samples output is limited (by the default value
of max_samples), consuming the first packet immediately will cause
timing problems:
- The first packet with PTS 0 will output 4608 samples and be
consumed entirely
- The second packet with PTS 64 will output the remaining samples
(typically, a lot, that's why max_samples exist) until the decoded
samples of the first packet have been exhausted, at which point the
samples of the second packet will be decoded and output when
av_decode_frame is called with the next packet).
That means there's a PTS jump since the first packet is 'decoded'
immediately, which can be seen with avplay or mplayer: the timing
jumps immediately to 6.2s (which is the size of a packet).
Sample: http://streams.videolan.org/issues/6348/Goldwave-MAClib.ape
Signed-off-by: Justin Ruggles <justin.ruggles@gmail.com>
The i686 feature really is a CPU feature and should be handled as such.
The cpunop dependency on i686 should be expressed with a standard _deps
declaration instead of a manual test.
When streaming to limelight, the app name is either a full
"appname/subaccount" or "appname/_definst_". In the latter case,
the app name can be simplified into simply "appname", but the
authentication hashing assumes the /_definst_ still to be present.
Signed-off-by: Martin Storsjö <martin@martin.st>
When using AV_NOPTS_VALUE (which expands to INT64_C(0x8000000000000000))
as union initializer for a double field, the c99 converter needs to
interpret this constant when filling the union initializer, and it is
interpreted as a positive value.
When converting AV_NOPTS_VALUE to a double, MSVC 2010 ends up with
the same positive value as the c99 converter, while MSVC 2012 gets
a negative value.
This results in an infite loop in various FATE tests on MSVC 2012.
Signed-off-by: Martin Storsjö <martin@martin.st>
* commit 'ef51692a49d58963966adca55c62da9c34c3c7e1':
Revert "w32pthread: help compiler figure out undeeded code"
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '4332bf98dc051fd1ffbd9d4ddc1c5e55790c96f1':
w32threads: Don't use function pointers when linking directly to newer APIs
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '310cc4bf82824f09bdd0b9147ed725cdbeaf9bdd':
smoothstreamingenc: Write to a temp file while updating the manifest
Merged-by: Michael Niedermayer <michaelni@gmx.at>
This reverts commit 4622f11f9c.
The compiler should be able to do the dead code elimination now
without this when the cond_* names point directly to the real
functions instead of to local function pointers.
Signed-off-by: Martin Storsjö <martin@martin.st>
This reduces the call overhead slightly. More noticeably, it
restores the earlier (unintended?) feature that condition variable
functions work just fine even if w32thread_init() hasn't been called.
This was broken as a side effect of 4622f11f9, if explicitly targeting
Vista+.
This makes w32threading work in VP8 again, if targeting Vista+.
Signed-off-by: Martin Storsjö <martin@martin.st>
If a client tries to read the file while it's being updated, the client
would get an incomplete manifest. Instead write to a separate temp file
and atomically rename it to replace the previous one.
Signed-off-by: Martin Storsjö <martin@martin.st>
programs using ffmpeg that are compiled with -Wshorten-64-to-32
gives a warning when using header files common.h and rational.h
cast 64-bit truncated values to (uint32_t) to avoid the warning
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
The element was only being written when the value == 1. But the default
value of this element is 1, so this has no useful effect. This element
needs to be written when the value == 0.
Signed-off-by: Anton Khirnov <anton@khirnov.net>
* commit '2bbad1f94cbc5eab0aa2d937bc79d085477d0242':
movenc: Properly free allocated data on failures in mov_write_header
Conflicts:
libavformat/movenc.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '3559fb97c459c88b4f1d0eef80d55933d3b7fabe':
movenc: Check that tracks->enc exists before trying to free extradata
Conflicts:
libavformat/movenc.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '4d122b01e4ce539269ee2df193b061772c7374f6':
movenc: Check for allocation failures in mov_create_chapter_track
Merged-by: Michael Niedermayer <michaelni@gmx.at>
On failures in the write_trailer function, we could also ignore
the errors and try to finish the file despite these errors (which
would only leave an incomplete chapters track). It's probably better
to signal the error clearly to the caller though (and if this
function failed there's no guarantee that there's enough memory to
finish the trailer either).
Signed-off-by: Martin Storsjö <martin@martin.st>
The fate tests change as they used 1.2 previously
The increased size is due to:
32bit CRCs per slice by default (can be disabled),
it adds slice headers to allow decoding one slice without the others
an additional slice size field is added to make it possible to find
slices within corrupted surroundings.
these add up to about 57bit per slice more
at 50 frames and 4 slices thats 1425 byte
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
c99wrap choked on initialization of .dbl start_time option with
AV_NOPTS_VALUE: Unable to parse int64_t as expression primary
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* commit '9e7b62f0fb7462a902330fcc82cf596388f0187b':
twinvq: set block align for codecs and use it in size checks
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'b89e8759e053792704741d08cbc41c9ac3c7ed63':
mov: Write tmcd extradata
This commit should make no difference as we had tmcd support
already, which is not changed.
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '08504380ddf25d6905e189e9bf52e7a4c771a415':
mov: Refactor codec specific final steps in mov_finalize_stsd_codec
Conflicts:
libavformat/mov.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'dc518a3ae21e7b6420131b813cfc6bcdcad26b7e':
mov: Refactor subtitle specific parsing in mov_parse_stsd_subtitle
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'a3b53ff062eaccdaa28964899c63520ef2978c2e':
mov: Refactor video specific parsing in mov_parse_stsd_video
Conflicts:
libavformat/mov.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
This both allows factoring out size check for both MetaSound and TwinVQ-VQF
decoders and fixes the situation when there are several MetaSound frames
stuffed together (that happens in 8kHz @ 8kbps MetaSound in ASF for example).
When a id3 tag is larger than the amount of space we will probe
give it a score similar to what a .mp3 extension would have given it
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* commit '1f70a5ad284b33e8b3e2b40a5cb33055419781b7':
mov: use tkhd enabled flag to set the default track
Merged-by: Michael Niedermayer <michaelni@gmx.at>
QuickTime will play multiple audio tracks concurrently if this flag is
set for multiple audio tracks. And if no subtitle track has this flag
set, QuickTime will show no subtitles in the subtitle menu.
Signed-off-by: Anton Khirnov <anton@khirnov.net>
Some invalid values where not handled correctly in the later pixel
format matching code.
Fixes out of array accesses
Fixes Ticket2848
Found-by: Piotr Bandurski <ami_stuff@o2.pl>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* commit '4622f11f9c83db8a2e08408c71ff901826ca652c':
w32pthread: help compiler figure out undeeded code
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Faststart moves the moov atom to the beginning of the file and rewrites
the rest of the file after muxing is complete.
Signed-off-by: Martin Storsjö <martin@martin.st>
The emulation code is not needed when targetting Vista+
This helps getting rid of CreateSemaphore symbol, which is
forbidden in Windows Store apps.
Signed-off-by: Martin Storsjö <martin@martin.st>
* commit 'c18838f5eb7d7001a9dc653f5162868c04c1b2a1':
h264_ps: Use more meaningful error values
Conflicts:
libavcodec/h264_ps.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'c4e43560fe6677e9d60bfb3cffc41c7324e92a0b':
h264data: Move some tables to the only place they are used
Conflicts:
libavcodec/h264data.h
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '6c786765cd5eb794dedd4a0970dfe689b16dfeeb':
movenc: Allow chapters to be written in trailer
Conflicts:
libavformat/movenc.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '64af59bc4916fac5578b31c89da13c30b591bddf':
avformat: Fix references to removed av_close_input_file in Doxygen
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Fixes Ticket2859
Note, testcases related to the downmix channels are welcome.
(id like to make sure this is working correctly now, as obviously it didnt
work before ...)
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
This allows creation of frame accurate chapter marks from sources
like DVD and BD where the precise chapter location is not known until
the chapter mark has been reached during reading.
Signed-off-by: Martin Storsjö <martin@martin.st>
* commit '22de0f8369f1f3edf1a55e1d275f3c07c617b53e':
mov: Compute max duration among the tracks with a timescale
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '39523030108815242178ac5e209c83070bd1baef':
mov: Set the timescale for data streams
Conflicts:
libavformat/movenc.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'b886f5c2f1e71b3e60e4265c500158d392b4b9a4':
mkv: Allow flushing the current cluster in progress
Conflicts:
libavformat/matroskaenc.c
libavformat/version.h
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '59f595921eb2b848a80a74aa81b6bb43038c9ebe':
mkv: Flush the old cluster before writing a new one
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Allow emitting the current cluster that is being written before
starting a new one, simplifying how to figure out where clusters
are positioned in the output stream (for live streaming).
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
WebM files now support inband text tracks, as described in the
following specification:
http://wiki.webmproject.org/webm-metadata/temporal-metadata/webvtt-in-webm
The Matroska demuxer now detects the presence of WebVTT tracks,
synthesizing WebVTT packets (having codec id AV_CODEC_ID_WEBVTT) and
pushing them downstream in the normal way.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* qatar/master:
ogg: Fix potential infinite discard loop
No change as this commit has been part of ffmpeg since a while already
See: d7b542ae29
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Seeking in certain broken files would cause ogg_read_timestamp
to fail because ogg_packet would go into a state where all packets
of stream 1 would be discarded until the end of the stream.
Bug-Id: 553
CC: libav-stable@libav.org
Signed-off-by: Jan Gerber <j@v2v.cc>
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
This avoids the loss of a packet in many cases if the packet size was wrong.
It also improves detection of packet size changes
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
No case is known to have triggered this, but its more correct to check that the
new size differs.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Calculate the duration as accurately as possible to improve decoding of samples
where the last frame is smaller than the rest.
Example:
Take lossless-audio/luckynight-partial.tak from the FATE suit and convert it
to TTA muxed into matroska:
ffmpeg -i $(SAMPLES)/lossless-audio/luckynight-partial.tak -c:a tta lucky.mka
The framemd5 output for lucky.mka without this patch:
0, 0, 0, 46080, 184320, 7c3751ddd571d2903c3cf0ab4b3e3d0a
0, 46080, 46080, 46080, 184320, 6b70c782ba1da3f933fde2daa4f96b73
0, 92160, 92160, 46080, 184320, dcf70d89c54b9a4f0b302d4ec4fb302d
0, 138240, 138240, 46080, 184320, 48713ca38b388d2ea4abf5b86ed1226f
0, 184320, 184320, 46080, 184320, 12188a23648e7ebfb07cd6fe9197b2ea
0, 230400, 230400, 46080, 184320, 49653ab8186a5d4a044ed284671a26e0
0, 276480, 276480, 46080, 184320, 5e82c6a7fe58c7ea612c03a0a2927dd4
0, 322560, 322560, 46080, 184320, 83dc449dbd9eab5f2e8ad2b4403d6a21
0, 368640, 368640, 46080, 184320, bdd6b92c23d30978d4e802d305b0fc49
With this patch:
0, 0, 0, 46080, 184320, 7c3751ddd571d2903c3cf0ab4b3e3d0a
0, 46080, 46080, 46080, 184320, 6b70c782ba1da3f933fde2daa4f96b73
0, 92160, 92160, 46080, 184320, dcf70d89c54b9a4f0b302d4ec4fb302d
0, 138240, 138240, 46080, 184320, 48713ca38b388d2ea4abf5b86ed1226f
0, 184320, 184320, 46080, 184320, 12188a23648e7ebfb07cd6fe9197b2ea
0, 230400, 230400, 46080, 184320, 49653ab8186a5d4a044ed284671a26e0
0, 276480, 276480, 46080, 184320, 5e82c6a7fe58c7ea612c03a0a2927dd4
0, 322560, 322560, 46080, 184320, 83dc449dbd9eab5f2e8ad2b4403d6a21
0, 368640, 368640, 46080, 184320, bdd6b92c23d30978d4e802d305b0fc49
0, 414720, 414720, 4230, 16920, b50b440c5bbcecb8e9fbece643447593
The duration without this patch was calculated as 418950000000, which is bigger
than uint32_t and as such stored as 2338172288.
With this patch the duration is correctly calculated as 418950.
Signed-off-by: James Almer <jamrial@gmail.com>
Approved-by: Paul B Mahol <onemda@gmail.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
The mov/mp4 muxer has support for handling negative timestamps
via edit lists (which customarily is used for handling the 1-frame
delay due to B-frames as well).
Using the muxer's native way of handling it is better than using
the generic offsetting. The generic offsetting is a bit too
crude when e.g. the timebase of one track is 1/fps, where the
edit lists can handle it accurately.
Signed-off-by: Martin Storsjö <martin@martin.st>
This reverts commit bf36dc50ea, reversing
changes made to b7fc2693c7.
Conflicts:
libavcodec/h264.c
Keeping support for the old VDPAU API has been requested by our VDPAU maintainer
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Uses the 2.5 compatibility header included with the variant of
FFMS2 that uses AviSynth's C-interface. A copy of this header is
now provided in compat/avisynth.
avs_get_row_size_p and avs_get_height_p changed between versions
2.5 and 2.6. Since the avisynth_c.h header that avformat uses
assumes AviSynth 2.6, it would cause 2.5 to crash if given any
kind of real video (the Version() function was known to work,
though).
AvxSynth was unaffected by this issue because, despite being based
on AviSynth 2.5.8 and using 2.5.8's interface version number of 3,
it actually uses 2.6's versions of these functions.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
The case where decoding should only happen for keyframes and afterwards
(CODEC_FLAG2_SHOW_ALL not set) does not fully work neither before nor
after this
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'c59967fa7cc5bc2fa06b36c17d2c207240c06b3e':
h261: check the mtype index
Conflicts:
libavcodec/h261dec.c
The right half of the check is impossible to be true and thus replaced by
an assert()
See: ec3cd74f2d
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '9d86bfc259ae9ba7a76067ec931ff20fbb86ea2a':
hlsenc: Don't reset the number variable when wrapping
Conflicts:
libavformat/hlsenc.c
See: 75b9fb27f5
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '09c93b1b957f2049ea5fd8fb0e6f4d82680172f2':
hlsenc: Append the last incomplete segment when closing the output
Conflicts:
libavformat/hlsenc.c
See: 4630dfd1eb
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'c9031c7c1446a1a63eff7c0bf50d1ee559adf3fb':
hlsenc: Add a proper dependency on the mpegts muxer
Conflicts:
libavformat/Makefile
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'cb214707a6cb0d3272ec0261af6f1f5d8b7dabc7':
vp56data: Move all shared enum/struct declarations to common header
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '38f64c03301ac66d7b54b3e4bd2bf6454f9fb2d3':
mpeg12decdata.h: Move all tables to the only place they are used
Conflicts:
libavcodec/mpeg12decdata.h
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'c591d4575a6f97fbbe6145304b1ea960e8e81e14':
avcodec: Replace local extern declarations for tables with header #includes
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'd258531502b24cb653204fe4f003c8815755bdc4':
swscale: Mark a bunch of tables only used within one file static
Conflicts:
libswscale/swscale_unscaled.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '060ce0c697e261ca2792a7df30dfd1bae6900a4f':
ivi_common: Make some tables only used within the file static
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '4b054a3400f728c54470ee6a1eefe1d82420f6a2':
rtpproto: Check the right feature detection macro
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '163a729725c6eb0081b0af41a7279f7d19aee86e':
electronicarts: Let functions always returning the same value return void
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Implicit vector loads on POWER7 hardware can use the VSX
instruction set instead of classic Altivec/VMX. Let's force
a VMX load in this case.
Signed-off-by: Martin Storsjö <martin@martin.st>
The counter itself shouldn't be wrapped, since it is used for
determining end_pts for the next segment - only wrap the number
used for the segment file name.
Signed-off-by: Martin Storsjö <martin@martin.st>
The hls muxer itself doesn't have any direct (object file level)
dependencies on mpegtsenc.o, and including that object file
directly doesn't ensure that it is registered so that the muxer
actually is accessible.
Signed-off-by: Martin Storsjö <martin@martin.st>
This allows specifying more dither algorithms without using up flags and
without ambiguities.
Also initialize the new field based on the flags and use it.
Note, improving the logic of the checks is left to subsequent
commits, this here only switches from flags to enum.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
IPPROTO_IPV6 is unrelated here (it's only used in udp.c for
multicast sockopts), check for support for the sockaddr_in6
struct itself.
Signed-off-by: Martin Storsjö <martin@martin.st>
A file with a prepended ID3 tag of an uneven length was found
in the wild.
Check if the wav data starts at an uneven offset and use that
information to correct the seeking calculation in wav_seek_tag,
which used to only seek to even byte positions.
Regression since ac87eaf856
Signed-off-by: Alexander Strasser <eclipse7@gmx.net>
* commit '6b58e11a8331690ec32e9869db89ae10c54614e9':
rtpproto: Add an option for writing return packets to the address of the last received packets
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '2df0776c2293efb0ac12c003843ce19332342e01':
nuv: Use av_fast_realloc
Conflicts:
libavcodec/nuv.c
This change is not merged, the long ago fixed buffer use after codec_reinit()
was a bug.
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'feaaf5f7f0afac7223457f871af2ec9b99eb6cc6':
nuv: Reset the frame on resize
Conflicts:
libavcodec/nuv.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
An SDP description normally only contains the target IP address
and port for the packets. This means that we don't really have
any clue where to send the RTCP RR packets - previously they're
sent to the destination IP written in the SDP (at the same port),
which rarely is the actual peer. And if the source for the packets
is on a different port than the destination, it's never correct.
With a new option, we can choose to send the packets to the
address that the latest packet on each socket arrived from.
---
Some may even argue that this should be the default - perhaps,
but I'd rather keep it optional at first. Additionally, I'm not
sure if sending RTCP RR directly back to the source is
desireable for e.g. multicast.
Signed-off-by: Martin Storsjö <martin@martin.st>
If we've received packets on the same socket before, the return
packets are sent to that address. If we've only received packets
on the other socket, try to guess the source port for the other
one assuming the basic +1/-1 logic.
Signed-off-by: Martin Storsjö <martin@martin.st>
Move the sources documentation up below the marker for deprecated
otpions. Also mention the new block parameter, that was added
in 749722209.
Signed-off-by: Martin Storsjö <martin@martin.st>
It is possible to have an initial broken header and then valid packets.
Reported-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
CC: libav-stable@libav.org
The decompressed buffer can be used after codec_reinit, so it must be
preserved.
Reported-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
CC: libav-stable@libav.org
Update the fate reference since the last broken frame is not decoded
anymore.
Reported-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
CC: libav-stable@libav.org
flushing just the asf demuxer but not the cores buffers leads to inconsistencies
and a "random" packet position which later causes an assertion failure
Fixes Ticket2853
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Using VDPAU correctly means checking for preemption
and possibly regenerating the context all the time.
With the current API there is no context or other
user-defined pointer and thus this in not possible
during decoding unless using some hack like global
variables.
The need to reinitialize both surfaces and even function
pointers makes handling preemption even more difficult.
This patch introduces a new render2 function that gets
both the AVCodecContext and AVFrame in addition,
in both the user can store additional opaque data.
This allows even advanced approaches like keeping a
"generation counter" for the surfaces so they can be
regenerated on the fly and efficiently.
In addition, the function has a return value that will
be passed through all the way instead of being silently
ignored as for the current render function.
Unfortunately the HWAccel API has no way of providing
API/ABI compatibility, so a currently disallowed
state (render pointer being NULL) is used to extend it.
Signed-off-by: Reimar Döffinger <Reimar.Doeffinger@gmx.de>
This makes the encoding of picture descriptions consistent with the
encoding of other text id3 tags and works better with iTunes, which
does not display pictures with some UTF-16 picture descriptions
(including a UTF-16 empty string, i.e. BOM + terminator). It also
saves a few bytes.
Example:
ffmpeg -f lavfi -i sine=b=4 -f lavfi -i smptebars -map 0:a -map 1:v \
-codec:a libmp3lame -codec:v mjpeg -id3v2_version 3 \
-metadata:s:v comment="Cover (front)" -t 3 -y out.mp3
This example does not set a picture description (-metadata:s:v title=)
so an empty string is written in the id3v2.3 APIC frame. Without this
patch, UTF-16 is used and the cover art does not display in iTunes.
With the patch the cover art is displayed. (Note that iTunes does not
display or have a way to set picture descriptions, only the picture
itself, but nevertheless has trouble skipping some UTF-16 descriptions.)
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'd175a5730b42166704b7262b33f4b780d9d92f60':
doc: Add an example on publishing over RTMP
doc: Add librtmp to the section header for the librtmp specific details
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'a435ca5b4d9efebf0759220681010977c36615f7':
doc: Explain that the default RTMP user agent is different when publishing
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'aa16a6b0c56e3f46c5d7efb706b87a8f7a1603ec':
doc: Extend the rtmp example to include how to pass username/password
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '8e1fe345577a42f99591caf8a06c447613449694':
rtmp: Detect and warn if the user tries to pass librtmp style parameters
Merged-by: Michael Niedermayer <michaelni@gmx.at>
The fact that a different user agent is used is cruicial for getting
publishing authentication working. (When using librtmp, this other
user agent has to be specified manually, but that's not needed
with the libavformat internal RTMP support.)
Signed-off-by: Martin Storsjö <martin@martin.st>
* commit 'a76d0cdf21c3d9e464623cc0ad1c005abf952afa':
libavutil: Move avpriv_open to a new file, file_open.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'cb0244daaca83ab666798818f74f5181bf6bc387':
bktr: Changed a missed occurrance of open into avpriv_open
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '33237123c83bf4f8345e6ac889ad2e7dbd303d0e':
libavutil: Enable the MSVC DLL symbol loading workaround in shared builds as well
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '9d5ec50ead97e088d77317e77b18cef06cb3d053':
ff_socket: put out-of-line and fallback to fcntl() for close-on-exec
Conflicts:
libavformat/network.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
The first sentence of each of the modified man pages are worded a bit
awkwardly. These minor copy-edits should make them clearer.
Signed-off-by: Bryce Harrington <b.harrington@samsung.com>
Signed-off-by: Stefano Sabatini <stefasab@gmail.com>
Add one copy of the function into each of the libraries, similarly
to what we do for log2_tab. When using static libs, only one
copy of the file_open.o object file gets included, while when
using shared libraries, each of them get a copy of its own.
This fixes DLL builds with a statically linked C runtime, where
each DLL effectively has got its own instance of the C runtime,
where file descriptors can't be shared across runtimes.
On systems not using msvcrt, the function is not duplicated.
Signed-off-by: Martin Storsjö <martin@martin.st>
This used to only be necessary in static builds (when using the
dynamically linked C runtime), since the _imp prefixed symbols do
exist when linking to the actual DLL. When building testprogs,
however, the current library (e.g. libavutil for some of the testprogs)
is linked statically.
This fixes make fate on DLL builds when using the dynamically
linked C runtime.
Signed-off-by: Martin Storsjö <martin@martin.st>
This supports non-Linux systems (SOCK_CLOEXEC is non-standard) and
older Linux kernels to the extent possible.
Signed-off-by: Martin Storsjö <martin@martin.st>
* qatar/master:
FATE: add a TAK test
Conflicts:
tests/fate/lossless-audio.mak
No change as we already have a tak test with luckynight-partial.tak
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'dfc6b5c81491abf7effb97b23af17ccf7adcd132':
file: Move win32 utf8->wchar open wrapper to libavutil
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Also make sure that we only exit or restart the video if it is not paused and
if the picture queue is empty.
There is still room for improvement (filters may also buffer some frames), but
the patch fixes the most common use cases and ticket #2783 as well.
Signed-off-by: Marton Balint <cus@passwd.hu>
When libavformat was changed to use the new avpriv_open function
in 51eb213d00, this silently bypassed the existing wrapper for
win32. Move the win32 wrapper into libavutil/file.c to make sure
it gets called everywhere (not just in the libavformat case).
This makes sure that non-ascii file names gets opened properly
(where file names internally are stored as utf8, but they get
converted to wchar_t and opened with _wsopen).
Signed-off-by: Martin Storsjö <martin@martin.st>
Such buffers are not malloced thus freeing would be bad.
Note though this condition never could have happened so this
is more for correctness sake and not a true bugfix
Fixes CID1061047
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* commit '218d6844b37d339ffbf2044ad07d8be7767e2734':
h264dsp: Factorize code into a new function, h264_find_start_code_candidate
Conflicts:
libavcodec/h264_parser.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '7a82022ee2f9b1fad991ace0936901e7419444be':
h264_parser: Initialize the h264dsp context in the parser as well
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '0f1fb6c0194c85483dedb93b20a5b76f6fc9d520':
libavutil: Don't use fcntl if the function does not exist
cmdutils: Only do the windows-specific commandline parsing on _WIN32
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'fee9db1fdf921295233e94cbe2769f9cd722206d':
libavcodec: use avpriv_open()
Conflicts:
libavcodec/libxvid_rc.c
The changed code does not exist in ffmpeg anymore, thus nothing is
changed.
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Before After
Mean StdDev Mean StdDev Change
This function 508.8 23.4 185.4 9.0 +174.4%
Overall 3068.5 31.7 2752.1 29.4 +11.5%
In combination with the preceding patch:
Before After
Mean StdDev Mean StdDev Change
Overall 2925.6 26.2 2752.1 29.4 +6.3%
Signed-off-by: Martin Storsjö <martin@martin.st>
This performs the start code search which was previously part of
h264_find_frame_end() - the most CPU intensive part of the function.
By itself, this results in a performance regression:
Before After
Mean StdDev Mean StdDev Change
Overall time 2925.6 26.2 3068.5 31.7 -4.7%
but this can more than be made up for by platform-optimised
implementations of the function.
Signed-off-by: Martin Storsjö <martin@martin.st>
Each AVStream struct for an H.264 elementary stream actually has two
copies of the H264DSPContext struct (and in fact all the other members
of H264Context as well):
((H264Context *) ((AVStream *)st)->codec->priv_data)->h264dsp
((H264Context *) ((AVStream *)st)->parser->priv_data)->h264dsp
but only the first of these was actually being initialised. This
prevented the addition of platform-specific implementations of
parser-related functions.
Signed-off-by: Martin Storsjö <martin@martin.st>
* commit '869b04e89154cd92d2bcfdabcecbe3217864c099':
libavutil: add avpriv_open() to open files with close-on-exec flag
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '22c879057ead189c0f59241cb9eeb926381e3299':
mpegvideo_enc: drop outdated copy_picture_attributes() in favour of a modern av_frame_copy_props()
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'f4d371b9737c0405b3bc46d7ca0c856c0a8616b1':
rtsp: Don't include the listen flag in the SDP demuxer flags
Merged-by: Michael Niedermayer <michaelni@gmx.at>
This provides at least some protection against potential accidental
corruption of AVIO buffer workspace.
Signed-off-by: Martin Storsjö <martin@martin.st>
Fixes commandline parsing on Cygwin (on 64 bit, and on very recent
32 bit), where the configure check does find the CommandLineToArgvW
function (since it exists in the link libraries and in the headers),
but whose GetCommandLineW() only returns the application's path.
(This is due to a cygwin internal optimization, see
http://cygwin.com/ml/cygwin/2013-07/msg00538.html for details.)
Arguments are only given through main's argc/argv, and they're already
UTF-8.
Signed-off-by: Martin Storsjö <martin@martin.st>
* cigaes/master:
ffmpeg: remove obsolete workaround in trim insertion.
lavu/log: do not skip overwritten lines.
Merged-by: Michael Niedermayer <michaelni@gmx.at>
The bug it was working seems to have been fixed.
This change causes ffmpeg to use the trim filter to implement
the -t option.
FATE tests are updated due to the more accurate handling of
the last packets.
It's only relevant for the RTSP demuxer. Similarly, the custom_io
flag is only present in the SDP demuxer options list.
Signed-off-by: Martin Storsjö <martin@martin.st>
* commit '62572435d4106098c090fb8f129a9090e41ff1eb':
rtpenc_chain: Check for errors from ffio_fdopen and ffio_open_dyn_packet_buf
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'f542dedf72091af8e6f32a12bd64289c58857c21':
rtspenc: Check the return value from ffio_open_dyn_packet_buf
Merged-by: Michael Niedermayer <michaelni@gmx.at>
'Fixes' ticket #2526 insofar as it stops 2.5.8 from crashing and
tells the user to upgrade to 2.6 if they want to make video input
work. A real solution to #2526 would be to get video input from
2.5.8 to work right.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Also clear the AVIOContext handle after freeing, to avoid
possible dangling pointers if the later call fails.
Signed-off-by: Martin Storsjö <martin@martin.st>
Developers added are active and in the copyright of the specified files,
If anyone wants to maintain anything else, send a patch that adds you to
MAINTAINERS.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* commit '61c31e4ee7ea79a9e74c0476b81244febf17e6d7':
configure: Properly set zlib dependencies for all components
Conflicts:
configure
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'a7d45e06e9757f49ea4e105cbefc3462a7324e9a':
configure: The W64 demuxer should select the WAV demuxer, not depend on it
Conflicts:
configure
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '255d9c570e117f0fcb8e51fa2c5996f3c4b2052b':
riff: Move demuxing code to a separate file.
Conflicts:
configure
libavformat/riff.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '3dd5c95deef51d7fbf6f4458ba42d1335d2f1472':
riff: Move muxing code to a separate file
Conflicts:
configure
libavformat/riff.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'abe5268c3328bf0e8fcfb7dc6e231b8920177c3a':
tcp: Use a different log message and level if there's more addresses to try
Conflicts:
libavformat/tcp.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '2a0ec47bd70ebb79e8b2d2f956feeb3a813df798':
unix: Convert from AVERROR to errno range before comparing error codes
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '971cce7ebb48a58e72e4dc57b3008e2682bcf4e7':
riff.h: Remove stray extern declaration for non-existing symbol
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '86f4c59bd676672040b89d8fea4c9e3b59bfe7ab':
twinvq: Split VQF-specific part from common TwinVQ decoder core
Conflicts:
libavcodec/Makefile
libavcodec/twinvq.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'bc909626b0a3c107625f2cb4c85479d18de422a8':
twinvq: move all bitstream reading into single place
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'c84ea750cf765c9d8845fca5546eb0ae25b9c855':
mpegts: Make discard_pid() faster for single-program streams
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'cabb1681697555e2c319c37c1f30f149207e9434':
mpegts: Remove one memcpy per packet
Conflicts:
libavformat/mpegts.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'daf1e0d3de03bd424016e2a7520e4e94ece5c0ac':
avio: Add an internal function for reading without copying
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '2852740e23f91d6775714d7cc29b9a73e1111ce0':
vdpau: store picture data in picture's rather than codec's context
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Prevent build failure for applicatins using the old API
This could be replaced be a include of version.h but some applications
would then need extern C wrapers
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* commit '488a0fa68973d48e264d54f1722f7afb18afbea7':
avconv: support -t as an input option.
Conflicts:
Changelog
ffmpeg.h
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '811bd0784679dfcb4ed02043a37c92f9df10500e':
avconv: make input -ss accurate when transcoding
Conflicts:
Changelog
doc/ffmpeg.texi
ffmpeg.h
ffmpeg_filter.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '56ee3f9de7b9f6090d599a27d33a392890a2f7b8':
avconv: distinguish between -ss 0 and -ss not being used
Conflicts:
ffmpeg.c
ffmpeg_opt.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '2e661f26f8b12195f75ae3b07d9591e395135bc7':
avconv: insert extra filters in the same way for both graph inputs and outputs
Conflicts:
ffmpeg_filter.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
This lowers the level of warnings printed if trying to connect
to a host name that provides both v6 and v4 addresses but the
service only is available on the v4 address (often occurring for
'localhost', with servers that aren't v6-aware).
Signed-off-by: Martin Storsjö <martin@martin.st>
* commit '3799376dd3373ee255651ed542c75b15665801a8':
lavfi/fifo: fix flushing when using request_samples
Conflicts:
libavfilter/fifo.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '612a5049d9b4ac1c2a293daf75fe814b7a94fdc7':
avserver: do not use a static string as a default for a string option
See: 19c41c6d8e
Merged-by: Michael Niedermayer <michaelni@gmx.at>
The options table is used in tools built by the host compiler and the
deprecation macros pull in bits that are not safe to use if host and
target compiler differ.
Changes since v1 of the patch:
- enable option by default
- add documentation
- move up PTS override code after PES header parsing, to ensure we use the
last PCR before the first packet of the teletext PES packet.
The option overrides teletext packet PTS and DTS values with the timestamps
calculated from the PCR of the first program which the teletext stream is part
of and is not discarded.
Using the same teletext PID for multiple programs is possible, therefore we
need some kind of heuristics to know which program PCR we should synchronize
to. Using the first non-discarded PCR pid among the programs of the teletext
stream seemed like a good choice.
The patch does not do PCR interpolation to estimate the PCR of the teltetext
packet, it just uses the last PCR of the program, which may cause a slight
error (0.1 sec) in the teletext packet pts-es.
Based on a patch by Reimar Döffinger.
http://lists.ffmpeg.org/pipermail/ffmpeg-devel/2012-September/131610.html
Signed-off-by: Marton Balint <cus@passwd.hu>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
This is required for the future addition of VoxWare MetaSound decoder, for its
functions are mostly the same but bitstream reader is completely different
and bitstream format is slightly different too.
Signed-off-by: Diego Biurrun <diego@biurrun.de>
The common case of the pointer having increased by one packet (which results
in no change to the modulus) can be detected with a 64-bit subtraction,
which is far cheaper than a division on many platforms.
Before After
Mean StdDev Mean StdDev Change
Divisions 248.3 8.8 51.5 7.4 +381.7%
Overall 2773.2 25.6 2372.5 43.1 +16.9%
Signed-off-by: Martin Storsjö <martin@martin.st>
When a stream contains a single program, there's no point in doing a
PID -> program lookup. Normally the one and only program isn't disabled,
so no packets should be discarded.
Before After
Mean StdDev Mean StdDev Change
discard_pid() 73.8 9.4 20.2 1.5 +264.8%
Overall 2300.8 28.0 2253.1 20.6 +2.1%
Signed-off-by: Martin Storsjö <martin@martin.st>
This was being performed to ensure that a complete packet was held in
contiguous memory, prior to parsing the packet. However, the source buffer
is typically large enough that the packet was already contiguous, so it is
beneficial to return the packet by reference in most cases.
Before After
Mean StdDev Mean StdDev Change
memcpy 720.7 32.7 649.8 25.1 +10.9%
Overall 2372.7 46.1 2291.7 21.8 +3.5%
Signed-off-by: Martin Storsjö <martin@martin.st>
As long as there is enough contiguous data in the avio buffer,
just return a pointer to it instead of copying it to the caller
provided buffer.
Signed-off-by: Martin Storsjö <martin@martin.st>
The bitstream buffers are now private and freed by libavcodec. For
backward compatibility, the hold bitstream buffer pointer is left NULL
(applications were supposed to av_freep() it).
Signed-off-by: Anton Khirnov <anton@khirnov.net>
* commit '77cc958f60f73963be4281d6e82ef81707e40c26':
lavfi: add const to the AVFilter parameter of avfilter_graph_create_filter()
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Iterative implementation of 32 bit fixed point split-radix FFT.
Max FFT that can be calculated currently is 2^12.
Signed-off-by: Nedeljko Babic <nbabic@mips.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Fixes Ticket1897
Some hunks that have become unneeded due to previous changes removed by the commiter.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* qatar/master:
configure: Check for GCC diagnostic pragma support inside of functions
This commit was cherry picked previously already to prevent compilation failure on a previous merge
See: 038c4f65ee
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '7950e519bb094897f957b9a9531cc60ba46cbc91':
Disable deprecation warnings for cases where a replacement is available
Conflicts:
libavcodec/avpacket.c
libavcodec/pthread.c
libavcodec/utils.c
libavdevice/v4l2.c
libavfilter/avfiltergraph.c
libavfilter/buffersrc.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '79be2c325c5ee8f7ac9e28399e51986ebe99bb3c':
doc/print_options: Move options headers to a saner place
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'b5a138652ff8a5b987d3e1191e67fd9f6575527e':
Give less generic names to global library option arrays
Conflicts:
libavcodec/options_table.h
libavfilter/avfilter.c
libavformat/options_table.h
libswscale/options.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* cehoyos/master:
Forward interlaced field information from mov to ffv1 decoder.
Do not suggest to use gas-preprocessor if using it would break compilation.
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Only read the information for old ffv1, level/version 3 saves
the information in the bitstream.
Fixes a part of ticket #2190.
Signed-off-by: Carl Eugen Hoyos <cehoyos@ag.or.at>
for the n0=0 case there are multiple solutions and different
platforms pick different ones
This should reduce the issues with fate and the timefilter test
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Increase visibility, in order to decrease troubleshooting for
users generating non playable H.264 content.
Signed-off-by: Carl Eugen Hoyos <cehoyos@ag.or.at>
* commit 'ee37d5811caa8f4ad125a37fe6ce3f9e66cd72f2':
rtpproto: Allow specifying a separate rtcp port in ff_rtp_set_remote_url
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'b85dbe68e222586fd77332716eb8ed5724db4e1b':
avconv: Call exit_program instead of exit in avconv_opt as well
Conflicts:
ffmpeg_opt.c
See: eeddeb6579
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'c7e921a54ffe7feb9f695c82f0a0764ab8d0f62b':
avopt: Check whether the object actually has got an AVClass
Conflicts:
libavutil/opt.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'b7e6da988bfd5def40ccf3476eb8ce2f98a969a5':
rtpproto: Move rtpproto specific function declarations to a separate header
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '892b0be1dfbdeaf71235fb6c593286e4f5c7e4ec':
rtpproto: Simplify the rtp_read function by looping over the fds
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '2e814d0329aded98c811d0502839618f08642685':
rtpenc: Simplify code by introducing a macro for rescaling NTP timestamps
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'c2e936de07d054bf476e60445b453bf6b4836820':
tree-test: Refactor and plug memory leaks
Conflicts:
libavutil/tree.c
Most of this commit is not merged due to bugs in it
Merged-by: Michael Niedermayer <michaelni@gmx.at>
A separate rtcp port can already be set when opening the rtp
protocol normally, but when doing port setup as in RTSP (where
we first need to open the local ports and pass them to the peer,
and only then receive the remote peer port numbers), we didn't
check the same url parameter as in the normal open routine.
Signed-off-by: Martin Storsjö <martin@martin.st>
I doubt that anyone ever would try to send a 1 byte packet
via the RTP protocol, but check just in case - it shouldn't
crash at least.
Signed-off-by: Martin Storsjö <martin@martin.st>
Interruptibility of file operations is strongly desirable in case of
slow storage access, e.g. mounted network share.
This commit introduces possibility to limit data quantity transferred by
'file' protocol at once. By default, old behaviour is preserved and data
is still tried to be transferred without block size limitation.
Note that file I/O operation still may block (or even freeze) inside of
single read(2) or write(2) operation.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
AVIOContext has got an av_class member that only gets set if
opening the context using avio_open2, but not if allocating a
custom IO context. A caller that wants to read AVOptions from
an AVIOContext (recursively using AV_OPT_SEARCH_CHILDREN) may
not know if the AVIOContext actually has got a class set or not.
Signed-off-by: Martin Storsjö <martin@martin.st>
* qatar/master:
hls: Call avformat_find_stream_info() on the chained demuxers
Conflicts:
libavformat/hls.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '1f57d60129b0e297cd197c6031c4439b30a6b503':
rtsp: Support RFC4570 (source specific multicast) more properly.
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '74972220909787af5a3ffe66f7fa8041827c2bd2':
rtpproto: Support more than one SSM include address, support excludes
Conflicts:
libavformat/rtpproto.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '7d99c92945e4b2d12ed2126365482e1900340da0':
udp: Keep track of include and exclude sources separately
Conflicts:
libavformat/udp.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '3357bccc5cb31795f248cd72dc480025f3075a5b':
udp: Allow specifying multicast include/blocks as host names as well
Merged-by: Michael Niedermayer <michaelni@gmx.at>
This allows the chained demuxer (or more precisely, the lavf
utility code) to better fill in timestamps on packets from
these, especially for cases where one stream is a raw ADTS
stream.
Signed-off-by: Martin Storsjö <martin@martin.st>
* commit '0e8c6f221a8ddb7dfb3c9e9bd0b33cb12e9391b8':
avisynth: Fix a "AVISynth" vs. "AviSynth" struct name typo
Conflicts:
doc/general.texi
libavformat/avisynth.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '4822ee3ca620a92cd2b0a9a03ea9e34288192c79':
configure: Detect AIX ar command instead of hardcoding it in the OS section
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '711c4da1af71e0d26ca93626a3c2dd48821f1cc7':
fate: Add tree test
Conflicts:
tests/fate/libavutil.mak
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'd99a2b6d0a4d0b2f5ba6a1f1637d6cb88c5c9184':
avutil/tree: Drop debug messages that clutter the output
Conflicts:
libavutil/tree.c
Merge for metadata only, a better solution has been commited that allows the
debug output to be turned on and off
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '06205b5efdcf0bc4c5463bfdd02f09b5f79fc4cd':
hls: Free packets when skipping packets when seeking
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'a2b7eeeb06471979ee39fd3075a04633222678a6':
hlsproto: Store all durations in AV_TIME_BASE
Conflicts:
libavformat/hlsproto.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'c44191039944526dd7eb6e536990b555837961f5':
hls: Store all durations in AV_TIME_BASE
Conflicts:
libavformat/hls.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'e1d5b244761cf69db655ad7ece1dbf2c13dd4fce':
hls: Store first_timestamp in units of AV_TIME_BASE
Conflicts:
libavformat/hls.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
This ensures that we dont write into one struct and read the other without
realizing that they arent identical.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Add support for domain names, for multiple source addresses,
for exclusions, and for session level specification of addresses.
Signed-off-by: Martin Storsjö <martin@martin.st>
This allows us to explicitly fail if the caller tried to set
both inclusions and exclusions at the same time.
Signed-off-by: Martin Storsjö <martin@martin.st>
Previously this only allowed literal IP addresses. When these
are conveyed in a SDP file as in RFC4570, host names are allowed
as well.
Signed-off-by: Martin Storsjö <martin@martin.st>
Also parse segment durations as floating point, which is allowed
since HLS version 3.
This is based on a patch by Zhang Rui.
Signed-off-by: Martin Storsjö <martin@martin.st>
When first_timestamp was stored as-is, its actual time base
wasn't known later in the seek function.
Additionally, the logic (from 795d9594cf) for scaling it
based on stream_index is flawed - stream_index in the seek
function only specifies which stream the seek timestamp refers
to, but obviously doesn't say anything about which stream
first_timestamp belongs to.
In the cases where stream_index was >= 0 and all streams had the
same time base, this didn't matter in practice.
Seeking taking first_timestamp into account is problematic
when one variant is mpegts (with real timestamps) and one variant
is raw ADTS (with timestamps only being accumulated packet
duration), where the variants start at totally different timestamps.
Signed-off-by: Martin Storsjö <martin@martin.st>
Compilation with --disable-everything --enable-shared failed
on systems with VAAPI support with the following undefined
symbol in libavcodec/vaapi.o:
libavcodec/libavcodec.so: undefined reference to `ff_mpeg_draw_horiz_band'
This reverts commit 4b6869d6e0.
Conflicts:
libavcodec/bitstream.c
This code can cause assertion failures on artificial OOM situations
It will be replaced by a solution that doesnt have this issue in the
following commits.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* qatar/master:
hls: Create an AVProgram for each variant
Conflicts:
libavformat/hls.c
See: 23db5418ed
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '9d64f236292ba28018dd9afd2d57f8f944b33f81':
hls: Respect the different stream time bases when comparing dts
Conflicts:
libavformat/hls.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'c11e33a3d9665dd1fc5dbdecdd03a4860ac6a622':
hls: Set stream offset before opening a chained demuxer
Conflicts:
libavformat/hls.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'cdd2d73d315ecaf19ff49e64c91923275f1bda68':
hls: Don't check discard flags until the parent demuxer's streams actually exist
hls: Copy the time base from the chained demuxer
Conflicts:
libavformat/hls.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'eb33ba04e03d9f36e23fffd442510c824be709c3':
hls: Return all packets from a previous variant before moving on to the next one
Conflicts:
libavformat/hls.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '3ca1dd2502a860989ee5289316af6b9816cee78f':
xl: Make sure the width is valid
Conflicts:
libavcodec/xl.c
See: 94b42da696
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Without the information, an application may choose audio from one
variant and video from another variant, which leads to fetching two
variants from the network. This enables av_find_best_stream() to find
matching audio and video streams, so that only one variant is fetched.
Signed-off-by: Martin Storsjö <martin@martin.st>
Also adjust the streams timestamps according to their start
timestamp when comparing. This helps getting correctly interleaved
packets if one stream lacks timestamps (such as a plain ADTS
stream when the other variants are full mpegts) when the others
have timestamps that don't start from zero.
This probably doesn't work properly if such a stream is
temporarily disabled (via the discard flags) and then reenabled,
and such streams are hard to correctly sync against the other
streams as well - but this works better than before at least.
The segment number restriction makes sure all variants advance
roughly at the same pace as well.
Signed-off-by: Martin Storsjö <martin@martin.st>
If passing the end of one segment while initializing the
chained demuxer, the parent demuxer's streams aren't set up
yet, so we can't recheck the discard flags.
Signed-off-by: Martin Storsjö <martin@martin.st>
This serves as a safeguard; normally we want to use the dts
comparison to interleave packets from all active variants. If that
dts comparison for some reason doesn't work as intended, make sure
that all packets in all variants for a certain sequence number have
been returned before moving on to the next one.
Signed-off-by: Martin Storsjö <martin@martin.st>
Incomplete crypted files would lead to a read after buffer boundary
otherwise.
Reported-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
CC: libav-stable@libav.org
Derived from VLC's http module.
Original authors:
Antoine Cellerier <dionoea@videolan.org>
Sébastien Escudier <sebastien-devel@celeos.eu>
Rémi Duraffort <ivoire@videolan.org>
Rémi Denis-Courmont <remi@remlab.net>
Francois Cartegnie <fcvlcdev@free.fr>
Normally, http servers shouldn't send this to us since we
don't advertise it with an Accept-Encoding header, but some
servers still do it anyway.
Signed-off-by: Martin Storsjö <martin@martin.st>
This fixes rendering of sections containing nested elements followed by
an array, for example as in the case:
programs->streams->stream
enabled by the -show_programs option.
* qatar/master:
doc: cosmetics: Consistently format list and table items
Conflicts:
doc/developer.texi
doc/fate.texi
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '5b097399baa2e38cc513939cfab3a9b6fdbc33df':
eval: Explicitly ignore return value of strtod() in parse_db()
Conflicts:
libavutil/eval.c
See: 3cd9849d9c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'c8f0b20b4a6bb6691928789d83e4b02896969848':
avidec: Let the inner dv demuxer take care of discarding
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Some decoders may output both, this way the decoder can set it.
Signed-off-by: Marton Balint <cus@passwd.hu>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Only check dependencies if invoking the make targets 'check'
or anything matching 'fate%' except 'fate-rsync'.
Signed-off-by: Martin Storsjö <martin@martin.st>
* commit '86f042dcabde2a5386dbd95ab0451b274987d253':
wtv: Make WTV_SECTOR_BITS a 64 bit constant
Conflicts:
libavformat/wtv.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'b512360184ade835fba621f5042d643fc9e2ee9d':
avio: Don't set the seekable flag if no seek function is provided
See: 650355089c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '779e6c2b985f2ad461a1ae704160822f97709ba7':
lavfi: add attribute_align_arg to all public entry points
Conflicts:
libavfilter/buffersink.c
See: af2a196e66
Merged-by: Michael Niedermayer <michaelni@gmx.at>
This makes sure that values that are left-shifted by this constant
end up casted to 64 bit before shifting, avoiding overflow if the
value ends up larger than 2 GB.
Signed-off-by: Martin Storsjö <martin@martin.st>
Previously it was partly only added to central functions called
internally, however if GCC would inline these into the public fuction, the
alignment attribute would not take effect.
Instead, add it to all public entry points to avoid these problems.
Signed-off-by: Martin Storsjö <martin@martin.st>
Previously it was partly only added to central functions called
internally, however if GCC would inline these into the public fuction, the
alignment attribute would not take effect.
Instead, add it to all public entry points to avoid these problems.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* commit '93a51984a27f3ba84d4e6f13d0c704ee9891603e':
mpeg12: Ignore slice threading if hwaccel is active
Conflicts:
libavcodec/mpeg12dec.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* cehoyos/master:
Show max bitrate for mpeg2 video streams in avcodec_string().
Allow native compilation on the iPhone.
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Slice threading does not work with hardware acceleration, as decoding
is per-picture. This fixes Bugzilla #542.
Signed-off-by: Diego Biurrun <diego@biurrun.de>
VDPAU expects the bitstream value (0, 2 or 3).
libavcodec uses an enum (0, 1 or 2).
Signed-off-by: Rémi Denis-Courmont <remi@remlab.net>
Signed-off-by: Diego Biurrun <diego@biurrun.de>
When building for iOS in thumb mode, gas-preprocessor.pl doesn't
mark unused labels as thumb functions (as it does for other
local labels, where it can figure out that they are functions
due to being referenced in branch instructions). This leads to
linker warnings for some of those local labels, such as:
ld: warning: ARM function not 4-byte aligned: __a_evaluation from
libavcodec/libavcodec.a(simple_idct_arm.o)
Therefore, comment them out since they don't have any function.
They do still have a value in documenting key points in the
assembly source though.
Signed-off-by: Martin Storsjö <martin@martin.st>
Format is based on the thread:
"[PATCH] doc/encoders: Add libopus encoder doc" (06-28-2013)
http://thread.gmane.org/gmane.comp.video.ffmpeg.devel/165368/
Also merge the two option sections (Mapping and Private options).
Patch partially edited by Stefano Sabatini.
Signed-off-by: Stefano Sabatini <stefasab@gmail.com>
This is a minimal change to matroskaenc that implements CueRelativePosition in the output.
Most players will probably ignore this additional information, but it is in the
matroska spec, and it'd be nice to be able to make use of it.
Signed-off-by: Bernt Habermeier <bernt@wulfram.com>
Tested-by: wm4 <nfxjfg@googlemail.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* commit '2f034f255c49050e894ab9b88087c09ebe249f3f':
4xm: Reject not a multiple of 16 dimension
The newly added checks are redundant and thus replaced by asserts
See: db5b487551
Merged-by: Michael Niedermayer <michaelni@gmx.at>
A lock manager is not the only possibility to avoid open/close locking
issues but its easier and more robust than maintaining a lot of lock/unlock
calls.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
This prevents the unneeded insertion of multiple aresample filters in some cases
The format merging is moved to avoid having to call the channel layout
merge twice. The channel layout merge code uses different structures and
is not compatible with the added dry run wrappers.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'd6e4f5fef0d811e180fd7541941e07dca9e11dc0':
arm: Add VFP-accelerated version of int32_to_float_fmul_array8
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '31c6f6f65c0ed5a894e26ce44ab0c3e89c82b9a2':
fmtconvert: Add a new method, int32_to_float_fmul_array8
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'ce9ed10ac27b9cf32a6257e083ea2f052692d971':
arm: Add VFP-accelerated version of int32_to_float_fmul_scalar
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '41ef1d360bac65032aa32f6b43ae137666507ae5':
arm: Add VFP-accelerated version of synth_filter_float
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '7ef760d95c73dfee021b8fdee04f65126eb7edd1':
configure: generate full msvc debug symbols when linking in debug mode
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Before After
Mean StdDev Mean StdDev Change
This function 1323.0 98.0 746.2 60.6 +77.3%
Overall 15400.0 336.4 14147.5 288.4 +8.9%
Signed-off-by: Martin Storsjö <martin@martin.st>
Before After
Mean StdDev Mean StdDev Change
This function 1389.3 4.2 967.8 35.1 +43.6%
Overall 15577.5 83.2 15400.0 336.4 +1.2%
Signed-off-by: Martin Storsjö <martin@martin.st>
Before After
Mean StdDev Mean StdDev Change
This function 868.2 33.5 436.0 27.0 +99.1%
Overall 15973.0 223.2 15577.5 83.2 +2.5%
Signed-off-by: Martin Storsjö <martin@martin.st>
Before After
Mean StdDev Mean StdDev Change
This function 2653.0 28.5 1108.8 51.4 +139.3%
Overall 17049.5 408.2 15973.0 223.2 +6.7%
Signed-off-by: Martin Storsjö <martin@martin.st>
Before After
Mean StdDev Mean StdDev Change
This function 366.2 18.3 277.8 13.7 +31.9%
Overall 18420.5 489.1 17049.5 408.2 +8.0%
Signed-off-by: Martin Storsjö <martin@martin.st>
This is similar to int32_to_float_fmul_scalar, but
loads a new scalar multiplier every 8 input samples.
This enables the use of much larger input arrays, which
is important for pipelining on some CPUs (such as
ARMv6).
Signed-off-by: Martin Storsjö <martin@martin.st>
Before After
Mean StdDev Mean StdDev Change
This function 1175.0 4.4 366.2 18.3 +220.8%
Overall 19285.5 292.0 18420.5 489.1 +4.7%
Signed-off-by: Martin Storsjö <martin@martin.st>
Before After
Mean StdDev Mean StdDev Change
This function 9295.0 114.9 4853.2 83.5 +91.5%
Overall 23699.8 397.6 19285.5 292.0 +22.9%
Signed-off-by: Martin Storsjö <martin@martin.st>
Prior to this it was possible that format reduction was ended
before it fully propagated leading to failure later in picking
formats.
No testcase with unmodified source exists, the case was reproduced
with less aggressive list merging though.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
This causes a race condition with VLC. Its plausible that other
applications also would have races with it and its just fixing a memleak when
the user application forgets to free the codec. It causes more
problems than it solves in its current form, thus the revert.
Better solutions are welcome
This reverts commit 0f229f9b91.
This matches the matroska defintion of stereo_mode, with
no metadata written if no info exist in sei
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
libx264 has a few data exports which require X264_API_IMPORTS
to be defined if we link to libx264 dynamically on Windows.
In a similar fashion to how we handle our compat snprintf
implementation, if we define it all the time, the compiler
will first try and link to __imp_x264_symbol_name, and failing
that, as in the case of a static libx264, will attempt to link
to the non-prefixed symbol, which has already been pulled in by
other x264 functions' object files.
Signed-off-by: Derek Buitenhuis <derek.buitenhuis@gmail.com>
* qatar/master:
dsicinav: Clip the source size to the expected maximum
Clipping the compressed size based on the uncompressed size is not correct
thus this commit is not merged, and the merge is for git metadata only
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '36fb0d02a1faa11eaee51de01fb4061ad6092af9':
rtsp: Support multicast source filters (RFC 4570)
rtpproto: Check the source IP if one single source has been specified
rtpproto: Support IGMPv3 source specific multicast inclusion
Conflicts:
libavformat/rtpproto.c
libavformat/rtsp.c
libavformat/rtsp.h
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Theoretically using start_time should also work if seeking is available and we
could determine that the next packet after a flush packet is the first packet
of a stream, but I could not think of an easy and clean way to do that, that is
why I sticked to the no seeking available condition for now.
Fixes ticket #2647.
Signed-off-by: Marton Balint <cus@passwd.hu>
Previously we estimated the audio packet pts instead of the frame pts,
therefore it only worked within a single packet (containing multiple frames).
The new method works accross seperate audio packets as well and also handles
better the case if a decoder buffers several packets before outputting a
decoded frame.
Signed-off-by: Marton Balint <cus@passwd.hu>
Also use negative stream_index for signaling obsolete audio packets. Using the
size alone is not enough, because size is 0 for null packets as well.
Signed-off-by: Marton Balint <cus@passwd.hu>
This also fixes the case where negative chapter ids where input
And fixes the case where remuxing from mkv changed chapter ids
Found-by: Luca Barbato
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
There is no reason why this should copy the audio data in a very
complicated way. Also, strictly write the first plane, instead of
writing the whole buffer. This is more helpful in context of the
example. This way a user can clearly confirm that it works by playing
the written data as raw audio.
This assumes one audio packet is decoded one time. This is not true:
packets can be partially decoded. Then you have to "adjust" the packet
and pass the undecoded part of the packet to the decode function again.
This supports inclusion of one single IP address for now,
at the media level. Specifying the filter at the session level
(instead of at the media level), multiple source addresses,
exclusion, or using FQDNs instead of plain IP addresses is not
supported (yet at least).
Signed-off-by: Martin Storsjö <martin@martin.st>
If another peer is sending unicast packets to the same port that
we are listening on, those packets can end up being received despite
using source specific multicast. For those cases, manually check the
source address of received packets against the intended source address.
This only handles the case when the source list is one single IP
address for now, which probably is the most common case.
Based on a patch by Ed Torbett.
Signed-off-by: Martin Storsjö <martin@martin.st>
Blocking/exclusion is not supported yet.
The rtp protocol parameter takes the same form as the existing
sources parameter for the udp protocol.
Signed-off-by: Martin Storsjö <martin@martin.st>
* cehoyos/master:
Fix pix_fmt detection in the native jpeg2000 decoder.
lavf/concat: Never fail for sample aspect ratio 0:1.
lut3d: Fix reading 3dl files with leading comments.
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Passes Source-Specific Multicast parameters read from an sdp file through to the UDP socket code,
allowing source-specific multicast streams to be correctly received. As an integral part of this
change, additional checking (currently only enabled in the case of SSM streams, but probably
useful in similar scenarios) has been added to the RTP protocol handler to distinguish UDP packets
arriving from multiple sources to the same port and process only the expected packets
(those transmitted from the expected UDP source address). This resolves an issue identified
when multiple instances of FFmpeg subscribe to different Source-Specific Multicast streams
but with each sharing the same destination port.
Signed-off-by: Edward Torbett <ed.torbett@simulation-systems.co.uk>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
There is no record of this ever being used at all, anywhere,
since the feature was added in 2effd27446.
This gets rid of extra linker tricks just to support a feature
that isn't used, simplifying portability to other platforms.
Signed-off-by: Martin Storsjö <martin@martin.st>
Fix "Value 0.000000 for parameter 'srch' out of range"
error message when source or destination height is 1.
Note: since the av_opt_set_int() calls are not checked for
failure and the interlaced scalers are not actually used,
this error has no consequence apart from a frightening message
in the log.
Some players, like foobar2000 or modern versions of WMP, create WAV
files using the ITRK tag for track instead of IPRT
Signed-off-by: James Almer <jamrial@gmail.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* qatar/master:
Consistently use "cpu_flags" as variable/parameter name for CPU flags
Conflicts:
libavcodec/x86/dsputil_init.c
libavcodec/x86/h264dsp_init.c
libavcodec/x86/hpeldsp_init.c
libavcodec/x86/motion_est.c
libavcodec/x86/mpegvideo.c
libavcodec/x86/proresdsp_init.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* https://github.com/lukaszmluki/ffmpeg:
ftp: warning about pure-ftp server used as and output
ftp: comments
ftp: remove unused headers
ftp: fix interrupt callback misuse
Merged-by: Michael Niedermayer <michaelni@gmx.at>
FTP protocol used interrupt callback to simulate nonblock
operation which is a misuse of this callback.
This commit make FTP protocol fully blocking and removes
invalid usage of interrutp callback
Also adds support for multiline responses delimited with dashes
When encoding alpha channel in libvpx, the stride isn't set
properly for the alpha encoder. Fixing it.
Signed-off-by: Vignesh Venkatasubramanian <vigneshv@google.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Tags must have at least one SimpleTag element to be spec conformant.
Updated lavf-mkv and seek-lavf-mkv FATE references as the tests were affected by
this.
Fixes ticket #2785
Signed-off-by: James Almer <jamrial@gmail.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* qatar/master:
fmtconvert: Explicitly use int32_t instead of int
Conflicts:
libavcodec/ac3dec.c
libavcodec/fmtconvert.c
libavcodec/fmtconvert.h
See: f49564c607
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '31931520df35a6f9606fe8293c8a39e2d1fabedf':
mov: Do not allow updating the time scale after it has been set
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '5b4eb243bce10a3e8345401a353749e0414c54ca':
mov: Seek back if overreading an individual atom
Conflicts:
libavformat/mov.c
See: 6093960ae3
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '8f24c12be7a3b3ea105e67bba9a867fe210a2333':
ac3dec: Don't consume more data than the actual input packet size
Merged-by: Michael Niedermayer <michaelni@gmx.at>
If either of the deltas is too large for the multiplications to
succeed, don't use this for setting the avg frame rate.
Reported-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
Cc: libav-stable@libav.org
Signed-off-by: Martin Storsjö <martin@martin.st>
The time scale is set in mdhd, and later validated in the
enclosing trak atom once all of its children have been parsed.
A loose mdhd atom outside of a trak atom could update the time
scale of the last stream without any validation.
Reported-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
Cc: libav-stable@libav.org
Signed-off-by: Martin Storsjö <martin@martin.st>
This was handled properly in the normal return case at the end
of the function, but not in this special case.
Returning a value larger than the input packet size can cause
problems for certain library users.
Returning the actual input buffer size unconditionally, since
it is not guaranteed that frame_size is set to a sensible
value at this point.
Cc: libav-stable@libav.org
Signed-off-by: Martin Storsjö <martin@martin.st>
* commit '25a6666f6c07c6ac8449a63d7fbce0dfd29c54cd':
indeo: Bound-check before applying motion compensation
The added checks and one previously added check are replaced by asserts,
the conditions can only be
true when vectors are invalid or there are worse inconsistencies.
We are checking the vectors validity and there should be no
inconsistencies, thus the checks should not be needed.
Also no files are known to cause any anomalies in ffmpeg
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '1dd1b2332ebbac710d8e0214cec7595e118f2105':
rtsp: Include an User-Agent header field in all requests
Merged-by: Michael Niedermayer <michaelni@gmx.at>
A frame marked FRAMETYPE_NULL cannot be scalable and requires a
previous frame successfully decoded.
Reported-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
CC: libav-stable@libav.org
* commit '031be5b41b54c3b666f31d83fe3ad41c194af8c5':
ac3dec: Consistently use AC3_BLOCK_SIZE and sizeof
Conflicts:
libavcodec/ac3dec.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '68e57cde68f3da4c557ca15491fda74d1ea6321e':
ac3dec: Increment channel pointers only once per channel
Conflicts:
libavcodec/ac3dec.c
See: 7aabeea9ba
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '886e1b36f5044d3ceccbb01f64619acaf288fb7c':
jpeg2000: Remove unused passes array in Jpeg200Cblk structure
The array is left as its used by our encoder
Merged-by: Michael Niedermayer <michaelni@gmx.at>
If the channel mapping map multiple output channels to one
input channel, we should only increment the actual pointer once.
Cc: libav-stable@libav.org
Signed-off-by: Martin Storsjö <martin@martin.st>
The avresample maintainers decided not to support old versions of yasm.
Supporting old yasm in FFmpeg was no big effort in the last months,
so keep it for the time being.
It is not completely obvious where delogo's parameter show=1 draws its
rectangle. Document it so that the user can more easily tune the
parameters.
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Coverity complains about a possible sign extension issue in
apply_delogo(). While it is extremely unlikely to happen, it is easy
to fix so let's just do that. Using unsigned variables even makes the
binary code smaller.
Fixes Coverity CID 1046439.
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
This is a hotfix to fix -t / -ss
a different solution might be choosen later, i just dont want to leave
this broken
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* qatar/master:
vf_interlace: better handling of odd video size
Conflicts:
libavfilter/vf_interlace.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '3802833bc1f79775a1547c5e427fed6e92b77e53':
dca: Respect the current limits in the downmixing capabilities
Conflicts:
libavcodec/dcadec.c
See: 8e77c3846e
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'c82da343e635663605bd81c59d872bee3182da73':
pcm: always use codec->id instead of codec_id
This is not merged as we consistently use codec_id, while libav against what
the comit message might hint at mixes both in the decoder.
Its fine to use either but it should be consistent.
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'c0d973c41b4568d5bad1295879e35cfa611bdcf2':
vdpau: use the correct namespace for the union
Conflicts:
libavcodec/vdpau.h
See: 68dfe530e0
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'e9d394f3fad7e8fd8fc80e3b33cb045bbaceb446':
mlpdec: Do not set invalid context in read_restart_header
Conflicts:
libavcodec/mlpdec.c
See: a9cd12ee2a
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '3abde1a3b49cf299f2aae4eaae6b6cb5270bdc22':
pcx: Do not overread source buffer in pcx_rle_decode
Conflicts:
libavcodec/pcx.c
See: 8cd1c0febe
Bytestream based system is left in place and not switched to buf+end, such switch would be
a step backward
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'ef5b70affc6376bfeadd1ff649b79bad9a124fa8':
configure: Check for support for labels in the inline assembly
The timer code is not placed under ifdef as ours does not use labels
Merged-by: Michael Niedermayer <michaelni@gmx.at>
The faulty values rippled further down the codepath causing a
hard-to-track segfault in the assembly code.
Reported-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
CC: libav-stable@libav.org
Use this for enabling the ppc timer.h implementation only on
assemblers that support labels in the inline assembly.
Signed-off-by: Martin Storsjö <martin@martin.st>
* commit '7d65e960c72f36b73ae7fe84f8e427d758e61da9':
iff: Do not read over the source buffer
Conflicts:
libavcodec/iff.c
See: 2fbb37b51b
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Replace the sections "API" and "Integrating libavcodec or libavformat"
with updated / more accurate text.
See thread:
Subject: [FFmpeg-devel] [PATCH] doc/developer: merge and update sections about external development
Date: Fri, 5 Jul 2013 11:07:07 +0200
* cehoyos/master:
Suggest recompilation with openssl or gnutls if the https protocol is not found.
lavf/utils.c: Avoid a null pointer dereference on oom after duration_error allocation.
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '12576afe206d35231ccd61f9033c5fdab6a11e80':
adpcm: Write the correct number of samples for ima-dk4
Conflicts:
libavcodec/adpcm.c
See: f18c873ab5
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'bbf6a4aa20bfe3d7869b2218e66063602dfb8aa7':
imc: Catch a division by zero
atrac3: Error on impossible encoding/channel combinations
See: 13451f5520
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '22e76ec635bafdd1d1ec35581a7ac09e69e3c43e':
atrac3: set the getbits context the right buffer_end
atrac3: fix error handling
Conflicts:
libavcodec/atrac3.c
No change as these issues have been fixed previously
See: c8f25cafd2
See: 5eaed6d336
Merged-by: Michael Niedermayer <michaelni@gmx.at>
enabled threads && ! enabled pthreads && ! enabled atomics_native && die "non pthread threading without atomics not supported, try adding --enable-pthreads or --cpu=i486 or higher if you are on x86"
Some files were not shown because too many files have changed in this diff
Show More
Reference in New Issue
Block a user
Blocking a user prevents them from interacting with repositories, such as opening or commenting on pull requests or issues. Learn more about blocking a user.
