Add README_RS

Change-Id: I046b97ce4badb0730283fd44206c9e920cbea290

README_RS

@@ -0,0 +1,37 @@
+Welcome to read this page!
+
+How to run renderscript in VP9 decode
+
+  1. Compile RenderScript Kernel(We use zero copy this version,
+                                 if ndk rs module don't support this,
+                                 it can't pass compile)
+  Because RenderScript need g++, but VP9 use gcc.
+  So we need to compile rs alone as a so library. Then VP9 project load/use it.
+  RS code is in vp9/common/kernel/rs/, there is a compile.sh in that folder,
+  We can use sh to compile rs kernel.(need NDK-r9b or higher, we need to config ndk in path).
+  If compile success, it will gen:
+  vp9_rs_packing.so(vp9/common/kernel/rs/)
+  librs.inter_rs.so(vp9/common/kernel/rs/obj/)
+  libstlport_shared.so(vp9/common/kernel/rs/obj/)
+
+  2. Compile VP9 project
+  Just Compile it normally.
+
+  3. Run vpxdec with RenderScript(We use zero copy this version,
+                                  if system RS module don't support this,
+                                  it won't work)
+  [1]: push vp9_rs_packing.so to /data/local/tmp/(or /vendor/lib, /system/lib,
+       need adb remount)
+  [2]: push librs.inter_rs.so to /data/local/tmp/(or /vendor/lib, /system/lib,
+       need adb remount)
+  [3]: push libstlport_shared.so to /data/local/tmp/(or /vendor/lib, /system/lib,
+       need adb remount)
+  [4]: push vpxdec to /data/local/tmp
+  [5]: adb shell          (as root)
+  [6]: cd /data/local/tmp (on device)
+  [7]: export RSENABLE=1  (on device, if not, it won't use RS)
+  [8]: export QCTENABLE=1 (on device, enable qct kernel)
+  [9]: export OPENABLE=1  (on device, enable optimized kernel, dependence on system and driver)
+  [10]:export LD_LIBRARY_PATH=$LD_LIBRARY_PATH:/data/local/tmp (on device,
+       if we push .so file to /data/local/tmp, we need set this)
+  [11]:run vpxdec normally(on device)

args.h

@@ -9,8 +9,8 @@
  */
 
 
-#ifndef ARGS_H
-#define ARGS_H
+#ifndef ARGS_H_
+#define ARGS_H_
 #include <stdio.h>
 
 struct arg {
@@ -48,4 +48,4 @@ unsigned int arg_parse_uint(const struct arg *arg);
 int arg_parse_int(const struct arg *arg);
 struct vpx_rational arg_parse_rational(const struct arg *arg);
 int arg_parse_enum_or_int(const struct arg *arg);
-#endif
+#endif  // ARGS_H_

build/make/Android.mk

@@ -135,10 +135,14 @@ CODEC_SRCS_UNIQUE = $(sort $(CODEC_SRCS))
 
 # Pull out C files.  vpx_config.c is in the immediate directory and
 # so it does not need libvpx/ prefixed like the rest of the source files.
+# The neon files with intrinsics need to have .neon appended so the proper
+# flags are applied.
 CODEC_SRCS_C = $(filter %.c, $(CODEC_SRCS_UNIQUE))
-LOCAL_CODEC_SRCS_C = $(filter-out vpx_config.c, $(CODEC_SRCS_C))
+LOCAL_NEON_SRCS_C = $(filter %_neon.c, $(CODEC_SRCS_C))
+LOCAL_CODEC_SRCS_C = $(filter-out vpx_config.c %_neon.c, $(CODEC_SRCS_C))
 
 LOCAL_SRC_FILES += $(foreach file, $(LOCAL_CODEC_SRCS_C), libvpx/$(file))
+LOCAL_SRC_FILES += $(foreach file, $(LOCAL_NEON_SRCS_C), libvpx/$(file).neon)
 
 # Pull out assembly files, splitting NEON from the rest.  This is
 # done to specify that the NEON assembly files use NEON assembler flags.

build/make/Makefile

@@ -390,7 +390,7 @@ ifneq ($(call enabled,DIST-SRCS),)
     DIST-SRCS-$(CONFIG_MSVS)  += build/make/gen_msvs_def.sh
     DIST-SRCS-$(CONFIG_MSVS)  += build/make/gen_msvs_proj.sh
     DIST-SRCS-$(CONFIG_MSVS)  += build/make/gen_msvs_sln.sh
-    DIST-SRCS-$(CONFIG_MSVS)  += build/x86-msvs/yasm.rules
+    DIST-SRCS-$(CONFIG_MSVS)  += build/make/gen_msvs_vcxproj.sh
     DIST-SRCS-$(CONFIG_MSVS)  += build/x86-msvs/obj_int_extract.bat
     DIST-SRCS-$(CONFIG_MSVS)  += build/arm-msvs/obj_int_extract.bat
     DIST-SRCS-$(CONFIG_RVCT) += build/make/armlink_adapter.sh

build/make/obj_int_extract.c

@@ -321,7 +321,7 @@ bail:
   return 1;
 }
 
-char *parse_elf_string_table(elf_obj_t *elf, int s_idx, int idx) {
+const char *parse_elf_string_table(elf_obj_t *elf, int s_idx, int idx) {
   if (elf->bits == 32) {
     Elf32_Shdr shdr;
 

build/make/thumb.pm

@@ -24,7 +24,7 @@ sub FixThumbInstructions($$)
     # with left shift, addition and a right shift (to restore the
     # register to the original value). Currently the right shift
     # isn't necessary in the code base since the values in these
-    # registers aren't used, but doing the shift for consitency.
+    # registers aren't used, but doing the shift for consistency.
     # This converts instructions such as "add r12, r12, r5, lsl r4"
     # into the sequence "lsl r5, r4", "add r12, r12, r5", "lsr r5, r4".
     s/^(\s*)(add)(\s+)(r\d+),\s*(r\d+),\s*(r\d+),\s*lsl (r\d+)/$1lsl$3$6, $7\n$1$2$3$4, $5, $6\n$1lsr$3$6, $7/g;

configure

@@ -24,6 +24,7 @@ Advanced options:
   ${toggle_examples}              examples
   ${toggle_docs}                  documentation
   ${toggle_unit_tests}            unit tests
+  ${toggle_decode_perf_tests}     build decoder perf tests with unit tests
   --libc=PATH                     path to alternate libc
   --as={yasm|nasm|auto}           use specified assembler [auto, yasm preferred]
   --sdk-path=PATH                 path to root of sdk (android builds only)
@@ -31,7 +32,6 @@ Advanced options:
                                   supported by hardware [auto]
   ${toggle_codec_srcs}            in/exclude codec library source code
   ${toggle_debug_libs}            in/exclude debug version of libraries
-  ${toggle_md5}                   support for output of checksum data
   ${toggle_static_msvcrt}         use static MSVCRT (VS builds only)
   ${toggle_vp8}                   VP8 codec support
   ${toggle_vp9}                   VP9 codec support
@@ -183,7 +183,6 @@ enable_feature install_libs
 enable_feature static
 enable_feature optimizations
 enable_feature fast_unaligned #allow unaligned accesses, if supported by hw
-enable_feature md5
 enable_feature spatial_resampling
 enable_feature multithread
 enable_feature os_support
@@ -278,7 +277,6 @@ CONFIG_LIST="
     mem_manager
     mem_tracker
     mem_checks
-    md5
 
     dequant_tokens
     dc_recon
@@ -302,6 +300,7 @@ CONFIG_LIST="
     postproc_visualizer
     os_support
     unit_tests
+    decode_perf_tests
     multi_res_encoding
     temporal_denoising
     experimental
@@ -334,7 +333,6 @@ CMDLINE_SELECT="
     fast_unaligned
     codec_srcs
     debug_libs
-    md5
 
     dequant_tokens
     dc_recon
@@ -355,6 +353,7 @@ CMDLINE_SELECT="
     small
     postproc_visualizer
     unit_tests
+    decode_perf_tests
     multi_res_encoding
     temporal_denoising
     experimental

docs.mk

@@ -31,7 +31,6 @@ TXT_DOX = $(call enabled,TXT_DOX)
 
 EXAMPLE_PATH += $(SRC_PATH_BARE) #for CHANGELOG, README, etc
 
-doxyfile: $(if $(findstring examples, $(ALL_TARGETS)),examples.doxy)
 doxyfile: libs.doxy_template libs.doxy
 	@echo "    [CREATE] $@"
 	@cat $^ > $@

examples.mk

@@ -23,7 +23,10 @@ vpxdec.SRCS                 += md5_utils.c md5_utils.h
 vpxdec.SRCS                 += vpx_ports/vpx_timer.h
 vpxdec.SRCS                 += vpx/vpx_integer.h
 vpxdec.SRCS                 += args.c args.h
+vpxdec.SRCS                 += ivfdec.c ivfdec.h
 vpxdec.SRCS                 += tools_common.c tools_common.h
+vpxdec.SRCS                 += webmdec.c webmdec.h
+vpxdec.SRCS                 += y4menc.c y4menc.h
 vpxdec.SRCS                 += nestegg/halloc/halloc.h
 vpxdec.SRCS                 += nestegg/halloc/src/align.h
 vpxdec.SRCS                 += nestegg/halloc/src/halloc.c
@@ -35,8 +38,11 @@ vpxdec.SRCS                 += $(LIBYUV_SRCS)
 vpxdec.GUID                  = BA5FE66F-38DD-E034-F542-B1578C5FB950
 vpxdec.DESCRIPTION           = Full featured decoder
 UTILS-$(CONFIG_ENCODERS)    += vpxenc.c
-vpxenc.SRCS                 += args.c args.h y4minput.c y4minput.h
+vpxenc.SRCS                 += args.c args.h y4minput.c y4minput.h vpxenc.h
+vpxenc.SRCS                 += ivfdec.c ivfdec.h
+vpxenc.SRCS                 += ivfenc.c ivfenc.h
 vpxenc.SRCS                 += tools_common.c tools_common.h
+vpxenc.SRCS                 += warnings.c warnings.h
 vpxenc.SRCS                 += webmenc.c webmenc.h
 vpxenc.SRCS                 += vpx_ports/mem_ops.h
 vpxenc.SRCS                 += vpx_ports/mem_ops_aligned.h
@@ -53,18 +59,11 @@ vp8_scalable_patterns.GUID   = 0D6A210B-F482-4D6F-8570-4A9C01ACC88C
 vp8_scalable_patterns.DESCRIPTION = Temporal Scalability Encoder
 UTILS-$(CONFIG_VP9_ENCODER)    += vp9_spatial_scalable_encoder.c
 vp9_spatial_scalable_encoder.SRCS += args.c args.h
+vp9_spatial_scalable_encoder.SRCS += ivfenc.c ivfenc.h
+vp9_spatial_scalable_encoder.SRCS += tools_common.c tools_common.h
 vp9_spatial_scalable_encoder.GUID   = 4A38598D-627D-4505-9C7B-D4020C84100D
 vp9_spatial_scalable_encoder.DESCRIPTION = Spatial Scalable Encoder
 
-# Clean up old ivfenc, ivfdec binaries.
-ifeq ($(CONFIG_MSVS),yes)
-CLEAN-OBJS += $(foreach p,$(VS_PLATFORMS),$(p)/Release/ivfenc.exe)
-CLEAN-OBJS += $(foreach p,$(VS_PLATFORMS),$(p)/Release/ivfdec.exe)
-else
-CLEAN-OBJS += ivfenc{.c.o,.c.d,.dox,.exe,}
-CLEAN-OBJS += ivfdec{.c.o,.c.d,.dox,.exe,}
-endif
-
 # XMA example disabled for now, not used in VP8
 #UTILS-$(CONFIG_DECODERS)    += example_xma.c
 #example_xma.GUID             = A955FC4A-73F1-44F7-135E-30D84D32F022
@@ -207,9 +206,9 @@ $(foreach bin,$(BINS-yes),\
 # Rules to generate the GEN_EXAMPLES sources
 .PRECIOUS: %.c
 CLEAN-OBJS += $(GEN_EXAMPLES)
-%.c: examples/%.txt
+%.c: examples/%.c
 	@echo "    [EXAMPLE] $@"
-	@$(SRC_PATH_BARE)/examples/gen_example_code.sh $< > $@
+	@cp $< $@
 
 
 # The following pairs define a mapping of locations in the distribution
@@ -254,45 +253,3 @@ INSTALL-BINS-$(CONFIG_MSVS) += $(foreach p,$(VS_PLATFORMS),\
                                $(addprefix bin/$(p)/,$(ALL_EXAMPLES:.c=.exe)))
 $(foreach proj,$(call enabled,PROJECTS),\
     $(eval $(call vcproj_template,$(proj))))
-
-
-
-#
-# Documentation Rules
-#
-%.dox: examples/%.txt
-	@echo "    [DOXY] $@"
-	@$(SRC_PATH_BARE)/examples/gen_example_text.sh $< | \
-         $(SRC_PATH_BARE)/examples/gen_example_doxy.php \
-             example_$(@:.dox=)  $(@:.dox=.c) > $@
-
-%.dox: %.c
-	@echo "    [DOXY] $@"
-	@echo "/*!\page example_$(@:.dox=) $(@:.dox=)" > $@
-	@echo "   \includelineno $(notdir $<)" >> $@
-	@echo "*/" >> $@
-
-samples.dox: examples.mk
-	@echo "    [DOXY] $@"
-	@echo "/*!\page samples Sample Code" > $@
-	@echo "    This SDK includes a number of sample applications."\
-	      "each sample documents a feature of the SDK in both prose"\
-	      "and the associated C code. In general, later samples"\
-	      "build upon prior samples, so it is best to work through the"\
-	      "list in order. The following samples are included: ">>$@
-	@$(foreach ex,$(GEN_EXAMPLES:.c=),\
-	   echo "     - \subpage example_$(ex) $($(ex).DESCRIPTION)" >> $@;)
-	@echo >> $@
-	@echo "    In addition, the SDK contains a number of utilities."\
-              "Since these utilities are built upon the concepts described"\
-              "in the sample code listed above, they are not documented in"\
-              "pieces like the samples are. Thir sourcre is included here"\
-              "for reference. The following utilities are included:" >> $@
-	@$(foreach ex,$(UTILS:.c=),\
-	   echo "     - \subpage example_$(ex) $($(ex).DESCRIPTION)" >> $@;)
-	@echo "*/" >> $@
-
-CLEAN-OBJS += examples.doxy samples.dox $(ALL_EXAMPLES:.c=.dox)
-DOCS-yes += examples.doxy samples.dox $(ALL_EXAMPLES:.c=.dox)
-examples.doxy: samples.dox $(ALL_EXAMPLES:.c=.dox)
-	@echo "INPUT += $^" > $@

examples/decode_to_md5.c

@@ -0,0 +1,173 @@
+/*
+ *  Copyright (c) 2010 The WebM project authors. All Rights Reserved.
+ *
+ *  Use of this source code is governed by a BSD-style license
+ *  that can be found in the LICENSE file in the root of the source
+ *  tree. An additional intellectual property rights grant can be found
+ *  in the file PATENTS.  All contributing project authors may
+ *  be found in the AUTHORS file in the root of the source tree.
+ */
+
+// Frame-by-frame MD5 Checksum
+// ===========================
+//
+// This example builds upon the simple decoder loop to show how checksums
+// of the decoded output can be generated. These are used for validating
+// decoder implementations against the reference implementation, for example.
+//
+// MD5 algorithm
+// -------------
+// The Message-Digest 5 (MD5) is a well known hash function. We have provided
+// an implementation derived from the RSA Data Security, Inc. MD5 Message-Digest
+// Algorithm for your use. Our implmentation only changes the interface of this
+// reference code. You must include the `md5_utils.h` header for access to these
+// functions.
+//
+// Processing The Decoded Data
+// ---------------------------
+// Each row of the image is passed to the MD5 accumulator. First the Y plane
+// is processed, then U, then V. It is important to honor the image's `stride`
+// values.
+
+#include <stdarg.h>
+#include <stdio.h>
+#include <stdlib.h>
+#include <string.h>
+#define VPX_CODEC_DISABLE_COMPAT 1
+#include "./vpx_config.h"
+#include "vpx/vp8dx.h"
+#include "vpx/vpx_decoder.h"
+#include "md5_utils.h"
+
+#define VP8_FOURCC 0x30385056
+#define VP9_FOURCC 0x30395056
+
+#define IVF_FILE_HDR_SZ  (32)
+#define IVF_FRAME_HDR_SZ (12)
+
+static vpx_codec_iface_t *get_codec_interface(unsigned int fourcc) {
+  switch (fourcc) {
+    case VP8_FOURCC:
+      return vpx_codec_vp8_dx();
+    case VP9_FOURCC:
+      return vpx_codec_vp9_dx();
+  }
+  return NULL;
+}
+
+static unsigned int mem_get_le32(const unsigned char *mem) {
+  return (mem[3] << 24) | (mem[2] << 16) | (mem[1] << 8) | (mem[0]);
+}
+
+static void die(const char *fmt, ...) {
+  va_list ap;
+
+  va_start(ap, fmt);
+  vprintf(fmt, ap);
+  if (fmt[strlen(fmt) - 1] != '\n')
+    printf("\n");
+  exit(EXIT_FAILURE);
+}
+
+static void die_codec(vpx_codec_ctx_t *ctx, const char *s) {
+  const char *detail = vpx_codec_error_detail(ctx);
+
+  printf("%s: %s\n", s, vpx_codec_error(ctx));
+  if(detail)
+    printf("    %s\n",detail);
+  exit(EXIT_FAILURE);
+}
+
+static void get_image_md5(const vpx_image_t *img, unsigned char digest[16]) {
+  int plane, y;
+  MD5Context md5;
+
+  MD5Init(&md5);
+
+  for (plane = 0; plane < 3; ++plane) {
+    const unsigned char *buf = img->planes[plane];
+    const int stride = img->stride[plane];
+    const int w = plane ? (img->d_w + 1) >> 1 : img->d_w;
+    const int h = plane ? (img->d_h + 1) >> 1 : img->d_h;
+
+    for (y = 0; y < h; ++y) {
+      MD5Update(&md5, buf, w);
+      buf += stride;
+    }
+  }
+
+  MD5Final(digest, &md5);
+}
+
+static void print_md5(FILE *stream, unsigned char digest[16]) {
+  int i;
+
+  for (i = 0; i < 16; ++i)
+    fprintf(stream, "%02x", digest[i]);
+}
+
+int main(int argc, char **argv) {
+  FILE *infile, *outfile;
+  vpx_codec_ctx_t codec;
+  vpx_codec_iface_t *iface;
+  int flags = 0, frame_cnt = 0;
+  unsigned char file_hdr[IVF_FILE_HDR_SZ];
+  unsigned char frame_hdr[IVF_FRAME_HDR_SZ];
+  unsigned char frame[256 * 1024];
+
+  if (argc != 3)
+    die("Usage: %s <infile> <outfile>\n", argv[0]);
+
+  if (!(infile = fopen(argv[1], "rb")))
+    die("Failed to open %s for reading", argv[1]);
+
+  if (!(outfile = fopen(argv[2], "wb")))
+    die("Failed to open %s for writing", argv[2]);
+
+  if (!(fread(file_hdr, 1, IVF_FILE_HDR_SZ, infile) == IVF_FILE_HDR_SZ &&
+     file_hdr[0] == 'D' && file_hdr[1] == 'K' &&
+     file_hdr[2] == 'I' && file_hdr[3] == 'F'))
+    die("%s is not an IVF file.", argv[1]);
+
+  iface = get_codec_interface(mem_get_le32(file_hdr + 8));
+  if (!iface)
+    die("Unknown FOURCC code.");
+
+
+  printf("Using %s\n", vpx_codec_iface_name(iface));
+
+  if (vpx_codec_dec_init(&codec, iface, NULL, flags))
+    die_codec(&codec, "Failed to initialize decoder");
+
+  while (fread(frame_hdr, 1, IVF_FRAME_HDR_SZ, infile) == IVF_FRAME_HDR_SZ) {
+    const int frame_size = mem_get_le32(frame_hdr);
+    vpx_codec_iter_t iter = NULL;
+    vpx_image_t *img;
+
+    if (frame_size > sizeof(frame))
+      die("Frame %d data too big for example code buffer", frame_size);
+
+    if (fread(frame, 1, frame_size, infile) != frame_size)
+      die("Failed to read complete frame");
+
+    if (vpx_codec_decode(&codec, frame, frame_size, NULL, 0))
+      die_codec(&codec, "Failed to decode frame");
+
+    while ((img = vpx_codec_get_frame(&codec, &iter)) != NULL) {
+      unsigned char digest[16];
+
+      get_image_md5(img, digest);
+      print_md5(outfile, digest);
+      fprintf(outfile, "  img-%dx%d-%04d.i420\n",
+              img->d_w, img->d_h, ++frame_cnt);
+    }
+  }
+
+  printf("Processed %d frames.\n", frame_cnt);
+  if (vpx_codec_destroy(&codec))
+    die_codec(&codec, "Failed to destroy codec");
+
+  fclose(outfile);
+  fclose(infile);
+  return EXIT_SUCCESS;
+}

examples/decode_to_md5.txt

@@ -1,48 +0,0 @@
-@TEMPLATE decoder_tmpl.c
-Frame-by-frame MD5 Checksum
-===========================
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ INTRODUCTION
-This example builds upon the simple decoder loop to show how checksums
-of the decoded output can be generated. These are used for validating
-decoder implementations against the reference implementation, for example.
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ INTRODUCTION
-
-MD5 algorithm
--------------
-The Message-Digest 5 (MD5) is a well known hash function. We have provided
-an implementation derived from the RSA Data Security, Inc. MD5 Message-Digest
-Algorithm for your use. Our implmentation only changes the interface of this
-reference code. You must include the `md5_utils.h` header for access to these
-functions.
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ EXTRA_INCLUDES
-#include "md5_utils.h"
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ EXTRA_INCLUDES
-
-
-Processing The Decoded Data
----------------------------
-Each row of the image is passed to the MD5 accumulator. First the Y plane
-is processed, then U, then V. It is important to honor the image's `stride`
-values.
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ PROCESS_DX
-unsigned char  md5_sum[16];
-MD5Context     md5;
-int            i;
-
-MD5Init(&md5);
-
-for(plane=0; plane < 3; plane++) {
-    unsigned char *buf =img->planes[plane];
-
-    for(y=0; y < (plane ? (img->d_h + 1) >> 1 : img->d_h); y++) {
-        MD5Update(&md5, buf, (plane ? (img->d_w + 1) >> 1 : img->d_w));
-        buf += img->stride[plane];
-    }
-}
-
-MD5Final(md5_sum, &md5);
-for(i=0; i<16; i++)
-    fprintf(outfile, "%02x",md5_sum[i]);
-fprintf(outfile, "  img-%dx%d-%04d.i420\n", img->d_w, img->d_h,
-        frame_cnt);
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ PROCESS_DX

examples/decode_with_drops.c

@@ -0,0 +1,177 @@
+/*
+ *  Copyright (c) 2010 The WebM project authors. All Rights Reserved.
+ *
+ *  Use of this source code is governed by a BSD-style license
+ *  that can be found in the LICENSE file in the root of the source
+ *  tree. An additional intellectual property rights grant can be found
+ *  in the file PATENTS.  All contributing project authors may
+ *  be found in the AUTHORS file in the root of the source tree.
+ */
+
+// Decode With Drops Example
+// =========================
+//
+// This is an example utility which drops a series of frames, as specified
+// on the command line. This is useful for observing the error recovery
+// features of the codec.
+//
+// Usage
+// -----
+// This example adds a single argument to the `simple_decoder` example,
+// which specifies the range or pattern of frames to drop. The parameter is
+// parsed as follows:
+//
+// Dropping A Range Of Frames
+// --------------------------
+// To drop a range of frames, specify the starting frame and the ending
+// frame to drop, separated by a dash. The following command will drop
+// frames 5 through 10 (base 1).
+//
+//  $ ./decode_with_drops in.ivf out.i420 5-10
+//
+//
+// Dropping A Pattern Of Frames
+// ----------------------------
+// To drop a pattern of frames, specify the number of frames to drop and
+// the number of frames after which to repeat the pattern, separated by
+// a forward-slash. The following command will drop 3 of 7 frames.
+// Specifically, it will decode 4 frames, then drop 3 frames, and then
+// repeat.
+//
+//  $ ./decode_with_drops in.ivf out.i420 3/7
+//
+//
+// Extra Variables
+// ---------------
+// This example maintains the pattern passed on the command line in the
+// `n`, `m`, and `is_range` variables:
+//
+//
+// Making The Drop Decision
+// ------------------------
+// The example decides whether to drop the frame based on the current
+// frame number, immediately before decoding the frame.
+
+#include <stdarg.h>
+#include <stdio.h>
+#include <stdlib.h>
+#include <string.h>
+#define VPX_CODEC_DISABLE_COMPAT 1
+#include "./vpx_config.h"
+#include "vpx/vp8dx.h"
+#include "vpx/vpx_decoder.h"
+#define interface (vpx_codec_vp8_dx())
+
+
+#define IVF_FILE_HDR_SZ  (32)
+#define IVF_FRAME_HDR_SZ (12)
+
+static unsigned int mem_get_le32(const unsigned char *mem) {
+    return (mem[3] << 24)|(mem[2] << 16)|(mem[1] << 8)|(mem[0]);
+}
+
+static void die(const char *fmt, ...) {
+    va_list ap;
+
+    va_start(ap, fmt);
+    vprintf(fmt, ap);
+    if(fmt[strlen(fmt)-1] != '\n')
+        printf("\n");
+    exit(EXIT_FAILURE);
+}
+
+static void die_codec(vpx_codec_ctx_t *ctx, const char *s) {
+    const char *detail = vpx_codec_error_detail(ctx);
+
+    printf("%s: %s\n", s, vpx_codec_error(ctx));
+    if(detail)
+        printf("    %s\n",detail);
+    exit(EXIT_FAILURE);
+}
+
+
+int main(int argc, char **argv) {
+    FILE            *infile, *outfile;
+    vpx_codec_ctx_t  codec;
+    int              flags = 0, frame_cnt = 0;
+    unsigned char    file_hdr[IVF_FILE_HDR_SZ];
+    unsigned char    frame_hdr[IVF_FRAME_HDR_SZ];
+    unsigned char    frame[256*1024];
+    vpx_codec_err_t  res;
+    int              n, m, is_range;
+
+    (void)res;
+    /* Open files */
+    if(argc!=4)
+        die("Usage: %s <infile> <outfile> <N-M|N/M>\n", argv[0]);
+    {
+        char *nptr;
+        n = strtol(argv[3], &nptr, 0);
+        m = strtol(nptr+1, NULL, 0);
+        is_range = *nptr == '-';
+        if(!n || !m || (*nptr != '-' && *nptr != '/'))
+            die("Couldn't parse pattern %s\n", argv[3]);
+    }
+    if(!(infile = fopen(argv[1], "rb")))
+        die("Failed to open %s for reading", argv[1]);
+    if(!(outfile = fopen(argv[2], "wb")))
+        die("Failed to open %s for writing", argv[2]);
+
+    /* Read file header */
+    if(!(fread(file_hdr, 1, IVF_FILE_HDR_SZ, infile) == IVF_FILE_HDR_SZ
+         && file_hdr[0]=='D' && file_hdr[1]=='K' && file_hdr[2]=='I'
+         && file_hdr[3]=='F'))
+        die("%s is not an IVF file.", argv[1]);
+
+    printf("Using %s\n",vpx_codec_iface_name(interface));
+    /* Initialize codec */
+    if(vpx_codec_dec_init(&codec, interface, NULL, flags))
+        die_codec(&codec, "Failed to initialize decoder");
+
+    /* Read each frame */
+    while(fread(frame_hdr, 1, IVF_FRAME_HDR_SZ, infile) == IVF_FRAME_HDR_SZ) {
+        int               frame_sz = mem_get_le32(frame_hdr);
+        vpx_codec_iter_t  iter = NULL;
+        vpx_image_t      *img;
+
+
+        frame_cnt++;
+        if(frame_sz > sizeof(frame))
+            die("Frame %d data too big for example code buffer", frame_sz);
+        if(fread(frame, 1, frame_sz, infile) != frame_sz)
+            die("Frame %d failed to read complete frame", frame_cnt);
+
+        if((is_range && frame_cnt >= n && frame_cnt <= m)
+           ||(!is_range && m - (frame_cnt-1)%m <= n)) {
+           putc('X', stdout);
+           continue;
+        }
+        putc('.', stdout);
+        fflush(stdout);
+        /* Decode the frame */
+        if(vpx_codec_decode(&codec, frame, frame_sz, NULL, 0))
+            die_codec(&codec, "Failed to decode frame");
+
+        /* Write decoded data to disk */
+        while((img = vpx_codec_get_frame(&codec, &iter))) {
+            unsigned int plane, y;
+
+            for(plane=0; plane < 3; plane++) {
+                unsigned char *buf =img->planes[plane];
+            
+                for(y=0; y < (plane ? (img->d_h + 1) >> 1 : img->d_h); y++) {
+                    (void) fwrite(buf, 1, (plane ? (img->d_w + 1) >> 1 : img->d_w),
+                                  outfile);
+                    buf += img->stride[plane];
+                }
+            }
+        }
+    }
+    printf("Processed %d frames.\n",frame_cnt);
+    if(vpx_codec_destroy(&codec))
+        die_codec(&codec, "Failed to destroy codec");
+
+    fclose(outfile);
+    fclose(infile);
+    return EXIT_SUCCESS;
+}

examples/decode_with_drops.txt

@@ -1,73 +0,0 @@
-@TEMPLATE decoder_tmpl.c
-Decode With Drops Example
-=========================
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ INTRODUCTION
-This is an example utility which drops a series of frames, as specified
-on the command line. This is useful for observing the error recovery
-features of the codec.
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ INTRODUCTION
-
-Usage
------
-This example adds a single argument to the `simple_decoder` example,
-which specifies the range or pattern of frames to drop. The parameter is
-parsed as follows:
-
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ USAGE
-if(argc!=4)
-    die("Usage: %s <infile> <outfile> <N-M|N/M>\n", argv[0]);
-{
-    char *nptr;
-    n = strtol(argv[3], &nptr, 0);
-    m = strtol(nptr+1, NULL, 0);
-    is_range = *nptr == '-';
-    if(!n || !m || (*nptr != '-' && *nptr != '/'))
-        die("Couldn't parse pattern %s\n", argv[3]);
-}
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ USAGE
-
-
-Dropping A Range Of Frames
---------------------------
-To drop a range of frames, specify the starting frame and the ending
-frame to drop, separated by a dash. The following command will drop
-frames 5 through 10 (base 1).
-
-  $ ./decode_with_drops in.ivf out.i420 5-10
-
-
-Dropping A Pattern Of Frames
-----------------------------
-To drop a pattern of frames, specify the number of frames to drop and
-the number of frames after which to repeat the pattern, separated by
-a forward-slash. The following command will drop 3 of 7 frames.
-Specifically, it will decode 4 frames, then drop 3 frames, and then
-repeat.
-
-  $ ./decode_with_drops in.ivf out.i420 3/7
-
-
-Extra Variables
----------------
-This example maintains the pattern passed on the command line in the
-`n`, `m`, and `is_range` variables:
-
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ EXTRA_VARS
-int              n, m, is_range;
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ EXTRA_VARS
-
-
-Making The Drop Decision
-------------------------
-The example decides whether to drop the frame based on the current
-frame number, immediately before decoding the frame.
-
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ PRE_DECODE
-if((is_range && frame_cnt >= n && frame_cnt <= m)
-   ||(!is_range && m - (frame_cnt-1)%m <= n)) {
-   putc('X', stdout);
-   continue;
-}
-putc('.', stdout);
-fflush(stdout);
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ PRE_DECODE

examples/decode_with_partial_drops.c

@@ -0,0 +1,328 @@
+/*
+ *  Copyright (c) 2010 The WebM project authors. All Rights Reserved.
+ *
+ *  Use of this source code is governed by a BSD-style license
+ *  that can be found in the LICENSE file in the root of the source
+ *  tree. An additional intellectual property rights grant can be found
+ *  in the file PATENTS.  All contributing project authors may
+ *  be found in the AUTHORS file in the root of the source tree.
+ */
+
+// Decode With Partial Drops Example
+// =========================
+//
+// This is an example utility which drops a series of frames (or parts of
+// frames), as specified on the command line. This is useful for observing the
+// error recovery features of the codec.
+//
+// Usage
+// -----
+// This example adds a single argument to the `simple_decoder` example,
+// which specifies the range or pattern of frames to drop. The parameter is
+// parsed as follows.
+//
+// Dropping A Range Of Frames
+// --------------------------
+// To drop a range of frames, specify the starting frame and the ending
+// frame to drop, separated by a dash. The following command will drop
+// frames 5 through 10 (base 1).
+//
+//  $ ./decode_with_partial_drops in.ivf out.i420 5-10
+//
+//
+// Dropping A Pattern Of Frames
+// ----------------------------
+// To drop a pattern of frames, specify the number of frames to drop and
+// the number of frames after which to repeat the pattern, separated by
+// a forward-slash. The following command will drop 3 of 7 frames.
+// Specifically, it will decode 4 frames, then drop 3 frames, and then
+// repeat.
+//
+//  $ ./decode_with_partial_drops in.ivf out.i420 3/7
+//
+// Dropping Random Parts Of Frames
+// -------------------------------
+// A third argument tuple is available to split the frame into 1500 bytes pieces
+// and randomly drop pieces rather than frames. The frame will be split at
+// partition boundaries where possible. The following example will seed the RNG
+// with the seed 123 and drop approximately 5% of the pieces. Pieces which
+// are depending on an already dropped piece will also be dropped.
+//
+//  $ ./decode_with_partial_drops in.ivf out.i420 5,123
+//
+// Extra Variables
+// ---------------
+// This example maintains the pattern passed on the command line in the
+// `n`, `m`, and `is_range` variables:
+//
+// Making The Drop Decision
+// ------------------------
+// The example decides whether to drop the frame based on the current
+// frame number, immediately before decoding the frame.
+
+#include <stdarg.h>
+#include <stdio.h>
+#include <stdlib.h>
+#include <string.h>
+#define VPX_CODEC_DISABLE_COMPAT 1
+#include "./vpx_config.h"
+#include "vpx/vp8dx.h"
+#include "vpx/vpx_decoder.h"
+#define interface (vpx_codec_vp8_dx())
+#include <time.h>
+
+
+#define IVF_FILE_HDR_SZ  (32)
+#define IVF_FRAME_HDR_SZ (12)
+
+static unsigned int mem_get_le32(const unsigned char *mem) {
+    return (mem[3] << 24)|(mem[2] << 16)|(mem[1] << 8)|(mem[0]);
+}
+
+static void die(const char *fmt, ...) {
+    va_list ap;
+
+    va_start(ap, fmt);
+    vprintf(fmt, ap);
+    if(fmt[strlen(fmt)-1] != '\n')
+        printf("\n");
+    exit(EXIT_FAILURE);
+}
+
+static void die_codec(vpx_codec_ctx_t *ctx, const char *s) {
+    const char *detail = vpx_codec_error_detail(ctx);
+
+    printf("%s: %s\n", s, vpx_codec_error(ctx));
+    if(detail)
+        printf("    %s\n",detail);
+    exit(EXIT_FAILURE);
+}
+
+struct parsed_header
+{
+    char key_frame;
+    int version;
+    char show_frame;
+    int first_part_size;
+};
+
+int next_packet(struct parsed_header* hdr, int pos, int length, int mtu)
+{
+    int size = 0;
+    int remaining = length - pos;
+    /* Uncompressed part is 3 bytes for P frames and 10 bytes for I frames */
+    int uncomp_part_size = (hdr->key_frame ? 10 : 3);
+    /* number of bytes yet to send from header and the first partition */
+    int remainFirst = uncomp_part_size + hdr->first_part_size - pos;
+    if (remainFirst > 0)
+    {
+        if (remainFirst <= mtu)
+        {
+            size = remainFirst;
+        }
+        else
+        {
+            size = mtu;
+        }
+
+        return size;
+    }
+
+    /* second partition; just slot it up according to MTU */
+    if (remaining <= mtu)
+    {
+        size = remaining;
+        return size;
+    }
+    return mtu;
+}
+
+void throw_packets(unsigned char* frame, int* size, int loss_rate,
+                   int* thrown, int* kept)
+{
+    unsigned char loss_frame[256*1024];
+    int pkg_size = 1;
+    int pos = 0;
+    int loss_pos = 0;
+    struct parsed_header hdr;
+    unsigned int tmp;
+    int mtu = 1500;
+
+    if (*size < 3)
+    {
+        return;
+    }
+    putc('|', stdout);
+    /* parse uncompressed 3 bytes */
+    tmp = (frame[2] << 16) | (frame[1] << 8) | frame[0];
+    hdr.key_frame = !(tmp & 0x1); /* inverse logic */
+    hdr.version = (tmp >> 1) & 0x7;
+    hdr.show_frame = (tmp >> 4) & 0x1;
+    hdr.first_part_size = (tmp >> 5) & 0x7FFFF;
+
+    /* don't drop key frames */
+    if (hdr.key_frame)
+    {
+        int i;
+        *kept = *size/mtu + ((*size % mtu > 0) ? 1 : 0); /* approximate */
+        for (i=0; i < *kept; i++)
+            putc('.', stdout);
+        return;
+    }
+
+    while ((pkg_size = next_packet(&hdr, pos, *size, mtu)) > 0)
+    {
+        int loss_event = ((rand() + 1.0)/(RAND_MAX + 1.0) < loss_rate/100.0);
+        if (*thrown == 0 && !loss_event)
+        {
+            memcpy(loss_frame + loss_pos, frame + pos, pkg_size);
+            loss_pos += pkg_size;
+            (*kept)++;
+            putc('.', stdout);
+        }
+        else
+        {
+            (*thrown)++;
+            putc('X', stdout);
+        }
+        pos += pkg_size;
+    }
+    memcpy(frame, loss_frame, loss_pos);
+    memset(frame + loss_pos, 0, *size - loss_pos);
+    *size = loss_pos;
+}
+
+int main(int argc, char **argv) {
+    FILE            *infile, *outfile;
+    vpx_codec_ctx_t  codec;
+    int              flags = 0, frame_cnt = 0;
+    unsigned char    file_hdr[IVF_FILE_HDR_SZ];
+    unsigned char    frame_hdr[IVF_FRAME_HDR_SZ];
+    unsigned char    frame[256*1024];
+    vpx_codec_err_t  res;
+    int              n, m, mode;
+    unsigned int     seed;
+    int              thrown=0, kept=0;
+    int              thrown_frame=0, kept_frame=0;
+    vpx_codec_dec_cfg_t  dec_cfg = {0};
+
+    (void)res;
+    /* Open files */
+    if(argc < 4 || argc > 6)
+        die("Usage: %s <infile> <outfile> [-t <num threads>] <N-M|N/M|L,S>\n",
+            argv[0]);
+    {
+        char *nptr;
+        int arg_num = 3;
+        if (argc == 6 && strncmp(argv[arg_num++], "-t", 2) == 0)
+            dec_cfg.threads = strtol(argv[arg_num++], NULL, 0);
+        n = strtol(argv[arg_num], &nptr, 0);
+        mode = (*nptr == '\0' || *nptr == ',') ? 2 : (*nptr == '-') ? 1 : 0;
+
+        m = strtol(nptr+1, NULL, 0);
+        if((!n && !m) || (*nptr != '-' && *nptr != '/' &&
+            *nptr != '\0' && *nptr != ','))
+            die("Couldn't parse pattern %s\n", argv[3]);
+    }
+    seed = (m > 0) ? m : (unsigned int)time(NULL);
+    srand(seed);thrown_frame = 0;
+    printf("Seed: %u\n", seed);
+    printf("Threads: %d\n", dec_cfg.threads);
+    if(!(infile = fopen(argv[1], "rb")))
+        die("Failed to open %s for reading", argv[1]);
+    if(!(outfile = fopen(argv[2], "wb")))
+        die("Failed to open %s for writing", argv[2]);
+
+    /* Read file header */
+    if(!(fread(file_hdr, 1, IVF_FILE_HDR_SZ, infile) == IVF_FILE_HDR_SZ
+         && file_hdr[0]=='D' && file_hdr[1]=='K' && file_hdr[2]=='I'
+         && file_hdr[3]=='F'))
+        die("%s is not an IVF file.", argv[1]);
+
+    printf("Using %s\n",vpx_codec_iface_name(interface));
+    /* Initialize codec */
+    flags = VPX_CODEC_USE_ERROR_CONCEALMENT;
+    res = vpx_codec_dec_init(&codec, interface, &dec_cfg, flags);
+    if(res)
+        die_codec(&codec, "Failed to initialize decoder");
+
+
+    /* Read each frame */
+    while(fread(frame_hdr, 1, IVF_FRAME_HDR_SZ, infile) == IVF_FRAME_HDR_SZ) {
+        int               frame_sz = mem_get_le32(frame_hdr);
+        vpx_codec_iter_t  iter = NULL;
+        vpx_image_t      *img;
+
+
+        frame_cnt++;
+        if(frame_sz > sizeof(frame))
+            die("Frame %d data too big for example code buffer", frame_sz);
+        if(fread(frame, 1, frame_sz, infile) != frame_sz)
+            die("Frame %d failed to read complete frame", frame_cnt);
+
+        /* Decide whether to throw parts of the frame or the whole frame
+           depending on the drop mode */
+        thrown_frame = 0;
+        kept_frame = 0;
+        switch (mode)
+        {
+        case 0:
+            if (m - (frame_cnt-1)%m <= n)
+            {
+                frame_sz = 0;
+            }
+            break;
+        case 1:
+            if (frame_cnt >= n && frame_cnt <= m)
+            {
+                frame_sz = 0;
+            }
+            break;
+        case 2:
+            throw_packets(frame, &frame_sz, n, &thrown_frame, &kept_frame);
+            break;
+        default: break;
+        }
+        if (mode < 2)
+        {
+            if (frame_sz == 0)
+            {
+                putc('X', stdout);
+                thrown_frame++;
+            }
+            else
+            {
+                putc('.', stdout);
+                kept_frame++;
+            }
+        }
+        thrown += thrown_frame;
+        kept += kept_frame;
+        fflush(stdout);
+        /* Decode the frame */
+        if(vpx_codec_decode(&codec, frame, frame_sz, NULL, 0))
+            die_codec(&codec, "Failed to decode frame");
+
+        /* Write decoded data to disk */
+        while((img = vpx_codec_get_frame(&codec, &iter))) {
+            unsigned int plane, y;
+
+            for(plane=0; plane < 3; plane++) {
+                unsigned char *buf =img->planes[plane];
+            
+                for(y=0; y < (plane ? (img->d_h + 1) >> 1 : img->d_h); y++) {
+                    (void) fwrite(buf, 1, (plane ? (img->d_w + 1) >> 1 : img->d_w),
+                                  outfile);
+                    buf += img->stride[plane];
+                }
+            }
+        }
+    }
+    printf("Processed %d frames.\n",frame_cnt);
+    if(vpx_codec_destroy(&codec))
+        die_codec(&codec, "Failed to destroy codec");
+
+    fclose(outfile);
+    fclose(infile);
+    return EXIT_SUCCESS;
+}

examples/decode_with_partial_drops.txt

@@ -1,238 +0,0 @@
-@TEMPLATE decoder_tmpl.c
-Decode With Partial Drops Example
-=========================
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ INTRODUCTION
-This is an example utility which drops a series of frames (or parts of frames),
-as specified on the command line. This is useful for observing the error
-recovery features of the codec.
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ INTRODUCTION
-
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ EXTRA_INCLUDES
-#include <time.h>
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ EXTRA_INCLUDES
-
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ HELPERS
-struct parsed_header
-{
-    char key_frame;
-    int version;
-    char show_frame;
-    int first_part_size;
-};
-
-int next_packet(struct parsed_header* hdr, int pos, int length, int mtu)
-{
-    int size = 0;
-    int remaining = length - pos;
-    /* Uncompressed part is 3 bytes for P frames and 10 bytes for I frames */
-    int uncomp_part_size = (hdr->key_frame ? 10 : 3);
-    /* number of bytes yet to send from header and the first partition */
-    int remainFirst = uncomp_part_size + hdr->first_part_size - pos;
-    if (remainFirst > 0)
-    {
-        if (remainFirst <= mtu)
-        {
-            size = remainFirst;
-        }
-        else
-        {
-            size = mtu;
-        }
-
-        return size;
-    }
-
-    /* second partition; just slot it up according to MTU */
-    if (remaining <= mtu)
-    {
-        size = remaining;
-        return size;
-    }
-    return mtu;
-}
-
-void throw_packets(unsigned char* frame, int* size, int loss_rate,
-                   int* thrown, int* kept)
-{
-    unsigned char loss_frame[256*1024];
-    int pkg_size = 1;
-    int pos = 0;
-    int loss_pos = 0;
-    struct parsed_header hdr;
-    unsigned int tmp;
-    int mtu = 1500;
-
-    if (*size < 3)
-    {
-        return;
-    }
-    putc('|', stdout);
-    /* parse uncompressed 3 bytes */
-    tmp = (frame[2] << 16) | (frame[1] << 8) | frame[0];
-    hdr.key_frame = !(tmp & 0x1); /* inverse logic */
-    hdr.version = (tmp >> 1) & 0x7;
-    hdr.show_frame = (tmp >> 4) & 0x1;
-    hdr.first_part_size = (tmp >> 5) & 0x7FFFF;
-
-    /* don't drop key frames */
-    if (hdr.key_frame)
-    {
-        int i;
-        *kept = *size/mtu + ((*size % mtu > 0) ? 1 : 0); /* approximate */
-        for (i=0; i < *kept; i++)
-            putc('.', stdout);
-        return;
-    }
-
-    while ((pkg_size = next_packet(&hdr, pos, *size, mtu)) > 0)
-    {
-        int loss_event = ((rand() + 1.0)/(RAND_MAX + 1.0) < loss_rate/100.0);
-        if (*thrown == 0 && !loss_event)
-        {
-            memcpy(loss_frame + loss_pos, frame + pos, pkg_size);
-            loss_pos += pkg_size;
-            (*kept)++;
-            putc('.', stdout);
-        }
-        else
-        {
-            (*thrown)++;
-            putc('X', stdout);
-        }
-        pos += pkg_size;
-    }
-    memcpy(frame, loss_frame, loss_pos);
-    memset(frame + loss_pos, 0, *size - loss_pos);
-    *size = loss_pos;
-}
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ HELPERS
-
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ DEC_INIT
-/* Initialize codec */
-flags = VPX_CODEC_USE_ERROR_CONCEALMENT;
-res = vpx_codec_dec_init(&codec, interface, &dec_cfg, flags);
-if(res)
-    die_codec(&codec, "Failed to initialize decoder");
-
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ DEC_INIT
-
-Usage
------
-This example adds a single argument to the `simple_decoder` example,
-which specifies the range or pattern of frames to drop. The parameter is
-parsed as follows:
-
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ USAGE
-if(argc < 4 || argc > 6)
-    die("Usage: %s <infile> <outfile> [-t <num threads>] <N-M|N/M|L,S>\n",
-        argv[0]);
-{
-    char *nptr;
-    int arg_num = 3;
-    if (argc == 6 && strncmp(argv[arg_num++], "-t", 2) == 0)
-        dec_cfg.threads = strtol(argv[arg_num++], NULL, 0);
-    n = strtol(argv[arg_num], &nptr, 0);
-    mode = (*nptr == '\0' || *nptr == ',') ? 2 : (*nptr == '-') ? 1 : 0;
-
-    m = strtol(nptr+1, NULL, 0);
-    if((!n && !m) || (*nptr != '-' && *nptr != '/' &&
-        *nptr != '\0' && *nptr != ','))
-        die("Couldn't parse pattern %s\n", argv[3]);
-}
-seed = (m > 0) ? m : (unsigned int)time(NULL);
-srand(seed);thrown_frame = 0;
-printf("Seed: %u\n", seed);
-printf("Threads: %d\n", dec_cfg.threads);
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ USAGE
-
-
-Dropping A Range Of Frames
---------------------------
-To drop a range of frames, specify the starting frame and the ending
-frame to drop, separated by a dash. The following command will drop
-frames 5 through 10 (base 1).
-
-  $ ./decode_with_partial_drops in.ivf out.i420 5-10
-
-
-Dropping A Pattern Of Frames
-----------------------------
-To drop a pattern of frames, specify the number of frames to drop and
-the number of frames after which to repeat the pattern, separated by
-a forward-slash. The following command will drop 3 of 7 frames.
-Specifically, it will decode 4 frames, then drop 3 frames, and then
-repeat.
-
-  $ ./decode_with_partial_drops in.ivf out.i420 3/7
-
-Dropping Random Parts Of Frames
--------------------------------
-A third argument tuple is available to split the frame into 1500 bytes pieces
-and randomly drop pieces rather than frames. The frame will be split at
-partition boundaries where possible. The following example will seed the RNG
-with the seed 123 and drop approximately 5% of the pieces. Pieces which
-are depending on an already dropped piece will also be dropped.
-
-  $ ./decode_with_partial_drops in.ivf out.i420 5,123
-
-
-Extra Variables
----------------
-This example maintains the pattern passed on the command line in the
-`n`, `m`, and `is_range` variables:
-
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ EXTRA_VARS
-int              n, m, mode;
-unsigned int     seed;
-int              thrown=0, kept=0;
-int              thrown_frame=0, kept_frame=0;
-vpx_codec_dec_cfg_t  dec_cfg = {0};
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ EXTRA_VARS
-
-
-Making The Drop Decision
-------------------------
-The example decides whether to drop the frame based on the current
-frame number, immediately before decoding the frame.
-
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ PRE_DECODE
-/* Decide whether to throw parts of the frame or the whole frame
-   depending on the drop mode */
-thrown_frame = 0;
-kept_frame = 0;
-switch (mode)
-{
-case 0:
-    if (m - (frame_cnt-1)%m <= n)
-    {
-        frame_sz = 0;
-    }
-    break;
-case 1:
-    if (frame_cnt >= n && frame_cnt <= m)
-    {
-        frame_sz = 0;
-    }
-    break;
-case 2:
-    throw_packets(frame, &frame_sz, n, &thrown_frame, &kept_frame);
-    break;
-default: break;
-}
-if (mode < 2)
-{
-    if (frame_sz == 0)
-    {
-        putc('X', stdout);
-        thrown_frame++;
-    }
-    else
-    {
-        putc('.', stdout);
-        kept_frame++;
-    }
-}
-thrown += thrown_frame;
-kept += kept_frame;
-fflush(stdout);
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ PRE_DECODE

examples/decoder_tmpl.c

@@ -1,104 +0,0 @@
-/*
- *  Copyright (c) 2010 The WebM project authors. All Rights Reserved.
- *
- *  Use of this source code is governed by a BSD-style license
- *  that can be found in the LICENSE file in the root of the source
- *  tree. An additional intellectual property rights grant can be found
- *  in the file PATENTS.  All contributing project authors may
- *  be found in the AUTHORS file in the root of the source tree.
- */
-
-
-/*
-@*INTRODUCTION
- */
-#include <stdarg.h>
-#include <stdio.h>
-#include <stdlib.h>
-#include <string.h>
-#define VPX_CODEC_DISABLE_COMPAT 1
-#include "./vpx_config.h"
-#include "vpx/vp8dx.h"
-#include "vpx/vpx_decoder.h"
-#define interface (vpx_codec_vp8_dx())
-@EXTRA_INCLUDES
-
-
-#define IVF_FILE_HDR_SZ  (32)
-#define IVF_FRAME_HDR_SZ (12)
-
-static unsigned int mem_get_le32(const unsigned char *mem) {
-    return (mem[3] << 24)|(mem[2] << 16)|(mem[1] << 8)|(mem[0]);
-}
-
-static void die(const char *fmt, ...) {
-    va_list ap;
-
-    va_start(ap, fmt);
-    vprintf(fmt, ap);
-    if(fmt[strlen(fmt)-1] != '\n')
-        printf("\n");
-    exit(EXIT_FAILURE);
-}
-
-@DIE_CODEC
-
-@HELPERS
-
-int main(int argc, char **argv) {
-    FILE            *infile, *outfile;
-    vpx_codec_ctx_t  codec;
-    int              flags = 0, frame_cnt = 0;
-    unsigned char    file_hdr[IVF_FILE_HDR_SZ];
-    unsigned char    frame_hdr[IVF_FRAME_HDR_SZ];
-    unsigned char    frame[256*1024];
-    vpx_codec_err_t  res;
-@@@@EXTRA_VARS
-
-    (void)res;
-    /* Open files */
-@@@@USAGE
-    if(!(infile = fopen(argv[1], "rb")))
-        die("Failed to open %s for reading", argv[1]);
-    if(!(outfile = fopen(argv[2], "wb")))
-        die("Failed to open %s for writing", argv[2]);
-
-    /* Read file header */
-    if(!(fread(file_hdr, 1, IVF_FILE_HDR_SZ, infile) == IVF_FILE_HDR_SZ
-         && file_hdr[0]=='D' && file_hdr[1]=='K' && file_hdr[2]=='I'
-         && file_hdr[3]=='F'))
-        die("%s is not an IVF file.", argv[1]);
-
-    printf("Using %s\n",vpx_codec_iface_name(interface));
-@@@@DEC_INIT
-
-    /* Read each frame */
-    while(fread(frame_hdr, 1, IVF_FRAME_HDR_SZ, infile) == IVF_FRAME_HDR_SZ) {
-        int               frame_sz = mem_get_le32(frame_hdr);
-        vpx_codec_iter_t  iter = NULL;
-        vpx_image_t      *img;
-
-
-        frame_cnt++;
-        if(frame_sz > sizeof(frame))
-            die("Frame %d data too big for example code buffer", frame_sz);
-        if(fread(frame, 1, frame_sz, infile) != frame_sz)
-            die("Frame %d failed to read complete frame", frame_cnt);
-
-@@@@@@@@PRE_DECODE
-@@@@@@@@DECODE
-
-        /* Write decoded data to disk */
-@@@@@@@@GET_FRAME
-            unsigned int plane, y;
-
-@@@@@@@@@@@@PROCESS_DX
-        }
-    }
-    printf("Processed %d frames.\n",frame_cnt);
-@@@@DESTROY
-
-    fclose(outfile);
-    fclose(infile);
-    return EXIT_SUCCESS;
-}

examples/decoder_tmpl.txt

@@ -1,62 +0,0 @@
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ DEC_INCLUDES
-#define VPX_CODEC_DISABLE_COMPAT 1
-#include "vpx/vpx_decoder.h"
-#include "vpx/vp9dx.h"
-#define interface (vpx_codec_vp8_dx())
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ DEC_INCLUDES
-
-
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ DIE_CODEC
-static void die_codec(vpx_codec_ctx_t *ctx, const char *s) {
-    const char *detail = vpx_codec_error_detail(ctx);
-
-    printf("%s: %s\n", s, vpx_codec_error(ctx));
-    if(detail)
-        printf("    %s\n",detail);
-    exit(EXIT_FAILURE);
-}
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ DIE_CODEC
-
-
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ USAGE
-if(argc!=3)
-    die("Usage: %s <infile> <outfile>\n", argv[0]);
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ USAGE
-
-
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ DEC_INIT
-/* Initialize codec */
-if(vpx_codec_dec_init(&codec, interface, NULL, flags))
-    die_codec(&codec, "Failed to initialize decoder");
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ DEC_INIT
-
-
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ DECODE
-/* Decode the frame */
-if(vpx_codec_decode(&codec, frame, frame_sz, NULL, 0))
-    die_codec(&codec, "Failed to decode frame");
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ DECODE
-
-
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ GET_FRAME
-while((img = vpx_codec_get_frame(&codec, &iter))) {
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ GET_FRAME
-
-
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ PROCESS_DX
-for(plane=0; plane < 3; plane++) {
-    unsigned char *buf =img->planes[plane];
-
-    for(y=0; y < (plane ? (img->d_h + 1) >> 1 : img->d_h); y++) {
-        (void) fwrite(buf, 1, (plane ? (img->d_w + 1) >> 1 : img->d_w),
-                      outfile);
-        buf += img->stride[plane];
-    }
-}
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ PROCESS_DX
-
-
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ DESTROY
-if(vpx_codec_destroy(&codec))
-    die_codec(&codec, "Failed to destroy codec");
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ DESTROY

examples/encoder_tmpl.txt

@@ -1,74 +0,0 @@
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ENC_INCLUDES
-#define VPX_CODEC_DISABLE_COMPAT 1
-#include "vpx/vpx_encoder.h"
-#include "vpx/vp9cx.h"
-#define interface (vpx_codec_vp8_cx())
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ENC_INCLUDES
-
-
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ DIE_CODEC
-static void die_codec(vpx_codec_ctx_t *ctx, const char *s) {
-    const char *detail = vpx_codec_error_detail(ctx);
-
-    printf("%s: %s\n", s, vpx_codec_error(ctx));
-    if(detail)
-        printf("    %s\n",detail);
-    exit(EXIT_FAILURE);
-}
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ DIE_CODEC
-
-
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ USAGE
-if(argc!=5)
-    die("Usage: %s <width> <height> <infile> <outfile>\n", argv[0]);
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ USAGE
-
-
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ENC_DEF_CFG
-/* Populate encoder configuration */
-res = vpx_codec_enc_config_default(interface, &cfg, 0);
-if(res) {
-    printf("Failed to get config: %s\n", vpx_codec_err_to_string(res));
-    return EXIT_FAILURE;
-}
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ENC_DEF_CFG
-
-
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ENC_SET_CFG
-/* Update the default configuration with our settings */
-cfg.rc_target_bitrate = width * height * cfg.rc_target_bitrate
-                        / cfg.g_w / cfg.g_h;
-cfg.g_w = width;
-cfg.g_h = height;
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ENC_SET_CFG
-
-
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ENC_INIT
-/* Initialize codec */
-if(vpx_codec_enc_init(&codec, interface, &cfg, 0))
-    die_codec(&codec, "Failed to initialize encoder");
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ENC_INIT
-
-
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ENCODE_FRAME
-frame_avail = read_frame(infile, &raw);
-if(vpx_codec_encode(&codec, frame_avail? &raw : NULL, frame_cnt,
-                    1, flags, VPX_DL_REALTIME))
-    die_codec(&codec, "Failed to encode frame");
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ENCODE_FRAME
-
-
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ PROCESS_FRAME
-case VPX_CODEC_CX_FRAME_PKT:
-    write_ivf_frame_header(outfile, pkt);
-    (void) fwrite(pkt->data.frame.buf, 1, pkt->data.frame.sz,
-                  outfile);
-    break;
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ PROCESS_FRAME
-
-
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ DESTROY
-vpx_img_free(&raw);
-if(vpx_codec_destroy(&codec))
-    die_codec(&codec, "Failed to destroy codec");
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ DESTROY

examples/error_resilient.c

@@ -8,10 +8,23 @@
  *  be found in the AUTHORS file in the root of the source tree.
  */
 
+// Error Resiliency Features
+// =========================
+//
+// This is an example demonstrating how to enable the error resiliency
+// features of the codec.
+//
+// Configuration
+// -------------
+// Error resiliency is controlled by the g_error_resilient member of the
+// configuration structure.
+//
+// Observing The Effects
+// ---------------------
+// Use the `decode_with_drops` example to decode with frames 5-10 dropped.
+// Compare the output for a file encoded with this example versus one
+// encoded with the `simple_encoder` example.
 
-/*
-@*INTRODUCTION
- */
 #include <stdio.h>
 #include <stdlib.h>
 #include <stdarg.h>
@@ -21,7 +34,6 @@
 #include "vpx/vp8cx.h"
 #define interface (vpx_codec_vp8_cx())
 #define fourcc    0x30385056
-@EXTRA_INCLUDES
 
 #define IVF_FILE_HDR_SZ  (32)
 #define IVF_FRAME_HDR_SZ (12)
@@ -48,7 +60,14 @@ static void die(const char *fmt, ...) {
     exit(EXIT_FAILURE);
 }
 
-@DIE_CODEC
+static void die_codec(vpx_codec_ctx_t *ctx, const char *s) {
+    const char *detail = vpx_codec_error_detail(ctx);
+
+    printf("%s: %s\n", s, vpx_codec_error(ctx));
+    if(detail)
+        printf("    %s\n",detail);
+    exit(EXIT_FAILURE);
+}
 
 static int read_frame(FILE *f, vpx_image_t *img) {
     size_t nbytes, to_read;
@@ -118,10 +137,10 @@ int main(int argc, char **argv) {
     int                  frame_avail;
     int                  got_data;
     int                  flags = 0;
-@@@@TWOPASS_VARS
 
     /* Open files */
-@@@@USAGE
+    if(argc!=5)
+        die("Usage: %s <width> <height> <infile> <outfile>\n", argv[0]);
     width = strtol(argv[1], NULL, 0);
     height = strtol(argv[2], NULL, 0);
     if(width < 16 || width%2 || height <16 || height%2)
@@ -133,20 +152,32 @@ int main(int argc, char **argv) {
 
     printf("Using %s\n",vpx_codec_iface_name(interface));
 
-@@@@ENC_DEF_CFG
+    /* Populate encoder configuration */
+    res = vpx_codec_enc_config_default(interface, &cfg, 0);
+    if(res) {
+        printf("Failed to get config: %s\n", vpx_codec_err_to_string(res));
+        return EXIT_FAILURE;
+    }
 
-@@@@ENC_SET_CFG
-@@@@ENC_SET_CFG2
+    /* Update the default configuration with our settings */
+    cfg.rc_target_bitrate = width * height * cfg.rc_target_bitrate
+                            / cfg.g_w / cfg.g_h;
+    cfg.g_w = width;
+    cfg.g_h = height;
+
+    /* Enable error resilient mode */
+    cfg.g_error_resilient = 1;
 
     write_ivf_file_header(outfile, &cfg, 0);
 
-@@@@TWOPASS_LOOP_BEGIN
 
         /* Open input file for this encoding pass */
         if(!(infile = fopen(argv[3], "rb")))
             die("Failed to open %s for reading", argv[3]);
 
-@@@@@@@@ENC_INIT
+        /* Initialize codec */
+        if(vpx_codec_enc_init(&codec, interface, &cfg, 0))
+            die_codec(&codec, "Failed to initialize encoder");
 
         frame_avail = 1;
         got_data = 0;
@@ -154,14 +185,19 @@ int main(int argc, char **argv) {
             vpx_codec_iter_t iter = NULL;
             const vpx_codec_cx_pkt_t *pkt;
 
-@@@@@@@@@@@@PER_FRAME_CFG
-@@@@@@@@@@@@ENCODE_FRAME
+            frame_avail = read_frame(infile, &raw);
+            if(vpx_codec_encode(&codec, frame_avail? &raw : NULL, frame_cnt,
+                                1, flags, VPX_DL_REALTIME))
+                die_codec(&codec, "Failed to encode frame");
             got_data = 0;
             while( (pkt = vpx_codec_get_cx_data(&codec, &iter)) ) {
                 got_data = 1;
                 switch(pkt->kind) {
-@@@@@@@@@@@@@@@@PROCESS_FRAME
-@@@@@@@@@@@@@@@@PROCESS_STATS
+                case VPX_CODEC_CX_FRAME_PKT:
+                    write_ivf_frame_header(outfile, pkt);
+                    (void) fwrite(pkt->data.frame.buf, 1, pkt->data.frame.sz,
+                                  outfile);
+                    break;
                 default:
                     break;
                 }
@@ -173,10 +209,11 @@ int main(int argc, char **argv) {
         }
         printf("\n");
         fclose(infile);
-@@@@TWOPASS_LOOP_END
 
     printf("Processed %d frames.\n",frame_cnt-1);
-@@@@DESTROY
+    vpx_img_free(&raw);
+    if(vpx_codec_destroy(&codec))
+        die_codec(&codec, "Failed to destroy codec");
 
     /* Try to rewrite the file header with the actual frame count */
     if(!fseek(outfile, 0, SEEK_SET))

examples/error_resilient.txt

@@ -1,25 +0,0 @@
-@TEMPLATE encoder_tmpl.c
-Error Resiliency Features
-=========================
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ INTRODUCTION
-This is an example demonstrating how to enable the error resiliency
-features of the codec.
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ INTRODUCTION
-
-
-Configuration
--------------
-Error resiliency is controlled by the g_error_resilient member of the
-configuration structure.
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~  ENC_SET_CFG2
-
-/* Enable error resilient mode */
-cfg.g_error_resilient = 1;
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ENC_SET_CFG2
-
-
-Observing The Effects
----------------------
-Use the `decode_with_drops` example to decode with frames 5-10 dropped.
-Compare the output for a file encoded with this example versus one
-encoded with the `simple_encoder` example.

examples/example_xma.c

@@ -0,0 +1,193 @@
+/*
+ *  Copyright (c) 2010 The WebM project authors. All Rights Reserved.
+ *
+ *  Use of this source code is governed by a BSD-style license
+ *  that can be found in the LICENSE file in the root of the source
+ *  tree. An additional intellectual property rights grant can be found
+ *  in the file PATENTS.  All contributing project authors may
+ *  be found in the AUTHORS file in the root of the source tree.
+ */
+
+
+/* This is a simple program showing how to initialize the decoder in XMA mode */
+#include <stdio.h>
+#include <stdlib.h>
+#include <stdarg.h>
+#include <string.h>
+#define VPX_CODEC_DISABLE_COMPAT 1
+#include "vpx_config.h"
+#include "vpx/vpx_decoder.h"
+#include "vpx/vpx_integer.h"
+#if CONFIG_VP9_DECODER
+#include "vpx/vp8dx.h"
+#endif
+
+static char *exec_name;
+static int   verbose = 0;
+
+static const struct {
+  const char *name;
+  const vpx_codec_iface_t *iface;
+} ifaces[] = {
+#if CONFIG_VP9_DECODER
+  {"vp9",  &vpx_codec_vp8_dx_algo},
+#endif
+};
+
+static void usage_exit(void) {
+  int i;
+
+  printf("Usage: %s <options>\n\n"
+         "Options:\n"
+         "\t--codec <name>\tCodec to use (default=%s)\n"
+         "\t-h <height>\tHeight of the simulated video frame, in pixels\n"
+         "\t-w <width> \tWidth of the simulated video frame, in pixels\n"
+         "\t-v         \tVerbose mode (show individual segment sizes)\n"
+         "\t--help     \tShow this message\n"
+         "\n"
+         "Included decoders:\n"
+         "\n",
+         exec_name,
+         ifaces[0].name);
+
+  for (i = 0; i < sizeof(ifaces) / sizeof(ifaces[0]); i++)
+    printf("    %-6s - %s\n",
+           ifaces[i].name,
+           vpx_codec_iface_name(ifaces[i].iface));
+
+  exit(EXIT_FAILURE);
+}
+
+static void usage_error(const char *fmt, ...) {
+  va_list ap;
+  va_start(ap, fmt);
+  vprintf(fmt, ap);
+  printf("\n");
+  usage_exit();
+}
+
+void my_mem_dtor(vpx_codec_mmap_t *mmap) {
+  if (verbose)
+    printf("freeing segment %d\n", mmap->id);
+
+  free(mmap->priv);
+}
+
+int main(int argc, char **argv) {
+  vpx_codec_ctx_t           decoder;
+  vpx_codec_iface_t        *iface = ifaces[0].iface;
+  vpx_codec_iter_t          iter;
+  vpx_codec_dec_cfg_t       cfg;
+  vpx_codec_err_t           res = VPX_CODEC_OK;
+  unsigned int            alloc_sz = 0;
+  unsigned int            w = 352;
+  unsigned int            h = 288;
+  int                     i;
+
+  exec_name = argv[0];
+
+  for (i = 1; i < argc; i++) {
+    if (!strcmp(argv[i], "--codec")) {
+      if (i + 1 < argc) {
+        int j, k = -1;
+
+        i++;
+
+        for (j = 0; j < sizeof(ifaces) / sizeof(ifaces[0]); j++)
+          if (!strcmp(ifaces[j].name, argv[i]))
+            k = j;
+
+        if (k >= 0)
+          iface = ifaces[k].iface;
+        else
+          usage_error("Error: Unrecognized argument (%s) to --codec\n",
+                      argv[i]);
+      } else
+        usage_error("Error: Option --codec requires argument.\n");
+    } else if (!strcmp(argv[i], "-v"))
+      verbose = 1;
+    else if (!strcmp(argv[i], "-h"))
+      if (i + 1 < argc) {
+        h = atoi(argv[++i]);
+      } else
+        usage_error("Error: Option -h requires argument.\n");
+    else if (!strcmp(argv[i], "-w"))
+      if (i + 1 < argc) {
+        w = atoi(argv[++i]);
+      } else
+        usage_error("Error: Option -w requires argument.\n");
+    else if (!strcmp(argv[i], "--help"))
+      usage_exit();
+    else
+      usage_error("Error: Unrecognized option %s\n\n", argv[i]);
+  }
+
+  if (argc == 1)
+    printf("Using built-in defaults. For options, rerun with --help\n\n");
+
+  /* XMA mode is not supported on all decoders! */
+  if (!(vpx_codec_get_caps(iface) & VPX_CODEC_CAP_XMA)) {
+    printf("%s does not support XMA mode!\n", vpx_codec_iface_name(iface));
+    return EXIT_FAILURE;
+  }
+
+  /* The codec knows how much memory to allocate based on the size of the
+   * encoded frames. This data can be parsed from the bitstream with
+   * vpx_codec_peek_stream_info() if a bitstream is available. Otherwise,
+   * a fixed size can be used that will be the upper limit on the frame
+   * size the decoder can decode.
+   */
+  cfg.w = w;
+  cfg.h = h;
+
+  /* Initialize the decoder in XMA mode. */
+  if (vpx_codec_dec_init(&decoder, iface, &cfg, VPX_CODEC_USE_XMA)) {
+    printf("Failed to initialize decoder in XMA mode: %s\n",
+           vpx_codec_error(&decoder));
+    return EXIT_FAILURE;
+  }
+
+  /* Iterate through the list of memory maps, allocating them with the
+   * requested alignment.
+   */
+  iter = NULL;
+
+  do {
+    vpx_codec_mmap_t  mmap;
+    unsigned int    align;
+
+    res = vpx_codec_get_mem_map(&decoder, &mmap, &iter);
+    align = mmap.align ? mmap.align - 1 : 0;
+
+    if (!res) {
+      if (verbose)
+        printf("Allocating segment %u, size %lu, align %u %s\n",
+               mmap.id, mmap.sz, mmap.align,
+               mmap.flags & VPX_CODEC_MEM_ZERO ? "(ZEROED)" : "");
+
+      if (mmap.flags & VPX_CODEC_MEM_ZERO)
+        mmap.priv = calloc(1, mmap.sz + align);
+      else
+        mmap.priv = malloc(mmap.sz + align);
+
+      mmap.base = (void *)((((uintptr_t)mmap.priv) + align) &
+                  ~(uintptr_t)align);
+      mmap.dtor = my_mem_dtor;
+      alloc_sz += mmap.sz + align;
+
+      if (vpx_codec_set_mem_map(&decoder, &mmap, 1)) {
+        printf("Failed to set mmap: %s\n", vpx_codec_error(&decoder));
+        return EXIT_FAILURE;
+      }
+    } else if (res != VPX_CODEC_LIST_END) {
+      printf("Failed to get mmap: %s\n", vpx_codec_error(&decoder));
+      return EXIT_FAILURE;
+    }
+  } while (res != VPX_CODEC_LIST_END);
+
+  printf("%s\n    %d bytes external memory required for %dx%d.\n",
+         decoder.name, alloc_sz, cfg.w, cfg.h);
+  vpx_codec_destroy(&decoder);
+  return EXIT_SUCCESS;
+
+}

examples/force_keyframe.c

@@ -0,0 +1,225 @@
+/*
+ *  Copyright (c) 2010 The WebM project authors. All Rights Reserved.
+ *
+ *  Use of this source code is governed by a BSD-style license
+ *  that can be found in the LICENSE file in the root of the source
+ *  tree. An additional intellectual property rights grant can be found
+ *  in the file PATENTS.  All contributing project authors may
+ *  be found in the AUTHORS file in the root of the source tree.
+ */
+
+// Forcing A Keyframe
+// ==================
+//
+// This is an example demonstrating how to control placement of keyframes
+// on a frame-by-frame basis.
+//
+// Configuration
+// -------------
+// Keyframes can be forced by setting the VPX_EFLAG_FORCE_KF bit of the
+// flags passed to `vpx_codec_control()`. In this example, we force a
+// keyframe every 8 frames.
+//
+// Observing The Effects
+// ---------------------
+// The output of the encoder examples shows a 'K' rather than a dot '.'
+// when the encoder generates a keyframe. Note that every 8 frames a 'K'
+// is output.
+
+#include <stdio.h>
+#include <stdlib.h>
+#include <stdarg.h>
+#include <string.h>
+#define VPX_CODEC_DISABLE_COMPAT 1
+#include "vpx/vpx_encoder.h"
+#include "vpx/vp8cx.h"
+#define interface (vpx_codec_vp8_cx())
+#define fourcc    0x30385056
+
+#define IVF_FILE_HDR_SZ  (32)
+#define IVF_FRAME_HDR_SZ (12)
+
+static void mem_put_le16(char *mem, unsigned int val) {
+    mem[0] = val;
+    mem[1] = val>>8;
+}
+
+static void mem_put_le32(char *mem, unsigned int val) {
+    mem[0] = val;
+    mem[1] = val>>8;
+    mem[2] = val>>16;
+    mem[3] = val>>24;
+}
+
+static void die(const char *fmt, ...) {
+    va_list ap;
+
+    va_start(ap, fmt);
+    vprintf(fmt, ap);
+    if(fmt[strlen(fmt)-1] != '\n')
+        printf("\n");
+    exit(EXIT_FAILURE);
+}
+
+static void die_codec(vpx_codec_ctx_t *ctx, const char *s) {
+    const char *detail = vpx_codec_error_detail(ctx);
+
+    printf("%s: %s\n", s, vpx_codec_error(ctx));
+    if(detail)
+        printf("    %s\n",detail);
+    exit(EXIT_FAILURE);
+}
+
+static int read_frame(FILE *f, vpx_image_t *img) {
+    size_t nbytes, to_read;
+    int    res = 1;
+
+    to_read = img->w*img->h*3/2;
+    nbytes = fread(img->planes[0], 1, to_read, f);
+    if(nbytes != to_read) {
+        res = 0;
+        if(nbytes > 0)
+            printf("Warning: Read partial frame. Check your width & height!\n");
+    }
+    return res;
+}
+
+static void write_ivf_file_header(FILE *outfile,
+                                  const vpx_codec_enc_cfg_t *cfg,
+                                  int frame_cnt) {
+    char header[32];
+
+    if(cfg->g_pass != VPX_RC_ONE_PASS && cfg->g_pass != VPX_RC_LAST_PASS)
+        return;
+    header[0] = 'D';
+    header[1] = 'K';
+    header[2] = 'I';
+    header[3] = 'F';
+    mem_put_le16(header+4,  0);                   /* version */
+    mem_put_le16(header+6,  32);                  /* headersize */
+    mem_put_le32(header+8,  fourcc);              /* headersize */
+    mem_put_le16(header+12, cfg->g_w);            /* width */
+    mem_put_le16(header+14, cfg->g_h);            /* height */
+    mem_put_le32(header+16, cfg->g_timebase.den); /* rate */
+    mem_put_le32(header+20, cfg->g_timebase.num); /* scale */
+    mem_put_le32(header+24, frame_cnt);           /* length */
+    mem_put_le32(header+28, 0);                   /* unused */
+
+    (void) fwrite(header, 1, 32, outfile);
+}
+
+
+static void write_ivf_frame_header(FILE *outfile,
+                                   const vpx_codec_cx_pkt_t *pkt)
+{
+    char             header[12];
+    vpx_codec_pts_t  pts;
+
+    if(pkt->kind != VPX_CODEC_CX_FRAME_PKT)
+        return;
+
+    pts = pkt->data.frame.pts;
+    mem_put_le32(header, pkt->data.frame.sz);
+    mem_put_le32(header+4, pts&0xFFFFFFFF);
+    mem_put_le32(header+8, pts >> 32);
+
+    (void) fwrite(header, 1, 12, outfile);
+}
+
+int main(int argc, char **argv) {
+    FILE                *infile, *outfile;
+    vpx_codec_ctx_t      codec;
+    vpx_codec_enc_cfg_t  cfg;
+    int                  frame_cnt = 0;
+    vpx_image_t          raw;
+    vpx_codec_err_t      res;
+    long                 width;
+    long                 height;
+    int                  frame_avail;
+    int                  got_data;
+    int                  flags = 0;
+
+    /* Open files */
+    if(argc!=5)
+        die("Usage: %s <width> <height> <infile> <outfile>\n", argv[0]);
+    width = strtol(argv[1], NULL, 0);
+    height = strtol(argv[2], NULL, 0);
+    if(width < 16 || width%2 || height <16 || height%2)
+        die("Invalid resolution: %ldx%ld", width, height);
+    if(!vpx_img_alloc(&raw, VPX_IMG_FMT_I420, width, height, 1))
+        die("Faile to allocate image", width, height);
+    if(!(outfile = fopen(argv[4], "wb")))
+        die("Failed to open %s for writing", argv[4]);
+
+    printf("Using %s\n",vpx_codec_iface_name(interface));
+
+    /* Populate encoder configuration */
+    res = vpx_codec_enc_config_default(interface, &cfg, 0);
+    if(res) {
+        printf("Failed to get config: %s\n", vpx_codec_err_to_string(res));
+        return EXIT_FAILURE;
+    }
+
+    /* Update the default configuration with our settings */
+    cfg.rc_target_bitrate = width * height * cfg.rc_target_bitrate
+                            / cfg.g_w / cfg.g_h;
+    cfg.g_w = width;
+    cfg.g_h = height;
+
+    write_ivf_file_header(outfile, &cfg, 0);
+
+
+        /* Open input file for this encoding pass */
+        if(!(infile = fopen(argv[3], "rb")))
+            die("Failed to open %s for reading", argv[3]);
+
+        /* Initialize codec */
+        if(vpx_codec_enc_init(&codec, interface, &cfg, 0))
+            die_codec(&codec, "Failed to initialize encoder");
+
+        frame_avail = 1;
+        got_data = 0;
+        while(frame_avail || got_data) {
+            vpx_codec_iter_t iter = NULL;
+            const vpx_codec_cx_pkt_t *pkt;
+
+            if(!(frame_cnt & 7))
+                flags |= VPX_EFLAG_FORCE_KF;
+            else
+                flags &= ~VPX_EFLAG_FORCE_KF;
+            frame_avail = read_frame(infile, &raw);
+            if(vpx_codec_encode(&codec, frame_avail? &raw : NULL, frame_cnt,
+                                1, flags, VPX_DL_REALTIME))
+                die_codec(&codec, "Failed to encode frame");
+            got_data = 0;
+            while( (pkt = vpx_codec_get_cx_data(&codec, &iter)) ) {
+                got_data = 1;
+                switch(pkt->kind) {
+                case VPX_CODEC_CX_FRAME_PKT:
+                    write_ivf_frame_header(outfile, pkt);
+                    (void) fwrite(pkt->data.frame.buf, 1, pkt->data.frame.sz,
+                                  outfile);
+                    break;
+                default:
+                    break;
+                }
+                printf(pkt->kind == VPX_CODEC_CX_FRAME_PKT
+                       && (pkt->data.frame.flags & VPX_FRAME_IS_KEY)? "K":".");
+                fflush(stdout);
+            }
+            frame_cnt++;
+        }
+        printf("\n");
+        fclose(infile);
+
+    printf("Processed %d frames.\n",frame_cnt-1);
+    vpx_img_free(&raw);
+    if(vpx_codec_destroy(&codec))
+        die_codec(&codec, "Failed to destroy codec");
+
+    /* Try to rewrite the file header with the actual frame count */
+    if(!fseek(outfile, 0, SEEK_SET))
+        write_ivf_file_header(outfile, &cfg, frame_cnt-1);
+    fclose(outfile);
+    return EXIT_SUCCESS;
+}

examples/force_keyframe.txt

@@ -1,28 +0,0 @@
-@TEMPLATE encoder_tmpl.c
-Forcing A Keyframe
-==================
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ INTRODUCTION
-This is an example demonstrating how to control placement of keyframes
-on a frame-by-frame basis.
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ INTRODUCTION
-
-
-Configuration
--------------
-Keyframes can be forced by setting the VPX_EFLAG_FORCE_KF bit of the
-flags passed to `vpx_codec_control()`. In this example, we force a
-keyframe every 8 frames.
-
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~  PER_FRAME_CFG
-if(!(frame_cnt & 7))
-    flags |= VPX_EFLAG_FORCE_KF;
-else
-    flags &= ~VPX_EFLAG_FORCE_KF;
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ PER_FRAME_CFG
-
-
-Observing The Effects
----------------------
-The output of the encoder examples shows a 'K' rather than a dot '.'
-when the encoder generates a keyframe. Note that every 8 frames a 'K'
-is output.

examples/gen_example_code.sh

@@ -1,85 +0,0 @@
-#!/bin/bash
-##
-##  Copyright (c) 2010 The WebM project authors. All Rights Reserved.
-##
-##  Use of this source code is governed by a BSD-style license
-##  that can be found in the LICENSE file in the root of the source
-##  tree. An additional intellectual property rights grant can be found
-##  in the file PATENTS.  All contributing project authors may
-##  be found in the AUTHORS file in the root of the source tree.
-##
-
-
-# gen_example_code.sh
-
-self=$0
-
-die_usage() {
-    echo "Usage: $self <example.txt>"
-    exit 1
-}
-
-die() {
-    echo "$@"
-    exit 1
-}
-
-include_block() {
-    show_bar=$1
-    block_name=${line##*@}
-    indent=${line%%${block_name}}
-    indent=${#indent}
-    [ $indent -eq 1 ] && indent=0
-    local on_block
-    while IFS=$'\n' read -r t_line; do
-        case "$t_line" in
-            \~*\ ${block_name})
-                if [ "x$on_block" == "xyes" ]; then
-                    return 0;
-                else
-                    on_block=yes
-                fi
-                ;;
-            @DEFAULT)
-                if [ "x$on_block" == "xyes" ]; then
-                    include_block $show_bar < "${template%.c}.txt"
-                    return 0
-                fi
-                ;;
-            *)
-                if [ "x$on_block" == "xyes" ]; then
-                    local rem
-                    (( rem = 78 - indent ))
-                    case "$block_name" in
-                      \**) printf "%${indent}s * %s\n" "" "$t_line" ;;
-                        *)
-                            if [ "$show_bar" == "yes" ]; then
-                                printf "%${indent}s%-${rem}s//\n" "" "$t_line"
-                            else
-                                printf "%${indent}s%s\n" "" "$t_line"
-                            fi
-                            ;;
-                    esac
-                fi
-        esac
-    done
-    return 1
-}
-
-txt=$1
-[ -f "$txt" ] || die_usage
-read -r template < "$txt"
-case "$template" in
-    @TEMPLATE*) template=${txt%/*}/${template##@TEMPLATE } ;;
-    *) die "Failed to parse template name from '$template'" ;;
-esac
-
-while IFS=$'\n' read -r line; do
-    case "$line" in
-        @*) include_block yes < "$txt" \
-            || include_block < "${template%.c}.txt" \
-            #|| echo "WARNING: failed to find text for block $block_name" >&2
-            ;;
-        *)  echo "$line" ;;
-    esac
-done < "$template"

examples/gen_example_doxy.php

@@ -1,224 +0,0 @@
-#!/usr/bin/env php
-/*
- *  Copyright (c) 2010 The WebM project authors. All Rights Reserved.
- *
- *  Use of this source code is governed by a BSD-style license
- *  that can be found in the LICENSE file in the root of the source
- *  tree. An additional intellectual property rights grant can be found
- *  in the file PATENTS.  All contributing project authors may
- *  be found in the AUTHORS file in the root of the source tree.
- */
-
-
-<?php
-
-/* This script converts markdown to doxygen htmlonly syntax, nesting the
- * content inside a \page. It expects input on stdin and outputs on stdout.
- *
- * Usage: gen_example_doxy.php <page_identifier> "<page description>"
- */
-
-
-$geshi_path = dirname($argv[0])."/includes/geshi/geshi/"; // Language files
-$tmp_token  = '<!-- I wanna rock you, Chaka Khan -->';
-
-// Include prerequisites or exit
-if(!include_once('includes/PHP-Markdown-Extra-1.2.3/markdown.php'))
-  die("Cannot load Markdown transformer.\n");
-if(!include_once('includes/PHP-SmartyPants-1.5.1e/smartypants.php'))
-  die("Cannot load SmartyPants transformer.\n");
-if(!include_once('includes/geshi/geshi.php'))
-  die("Cannot load GeSHi transformer.\n");
-// ASCIIMathPHP?
-// HTML::Toc?
-// Tidy?
-// Prince?
-
-/**
- *  Generate XHTML body
- *
- */
-
-$page_body = file_get_contents('php://stdin');
-
-// Transform any MathML expressions in the body text
-$regexp = '/\[\[(.*?)\]\]/'; // Double square bracket delimiters
-$page_body = preg_replace_callback($regexp, 'ASCIIMathPHPCallback', $page_body);
-
-// Fix ASCIIMathPHP's output
-$page_body = fix_asciiMath($page_body);
-
-// Wrap block-style <math> elements in <p>, since Markdown doesn't.
-$page_body = preg_replace('/\n(<math.*<\/math>)\n/', '<p class="eq_para">$1</p>', $page_body);
-
-// Transform the body text to HTML
-$page_body = Markdown($page_body);
-
-// Preprocess code blocks
-// Decode XML entities. GeSHi doesn't anticipate that
-// Markdown has already done this.
-$regexp = '|<pre><code>(.*?)<\/code><\/pre>|si';
-while (preg_match($regexp, $page_body, $matches) > 0)
-{
-  // Replace 1st match with token
-  $page_body = preg_replace($regexp, $tmp_token, $page_body, 1);
-  $block_new = $matches[1];
-  // Un-encode ampersand entities
-  $block_new = decode_markdown($block_new);
-  // Replace token with revised string
-  $page_body = preg_replace("|$tmp_token|", '<div class="codeblock">'.$block_new.'</div>', $page_body);
-}
-
-// Run GeSHi over code blocks
-$regexp   = '|<div class="codeblock">(.*?)<\/div>|si';
-$language = 'c';
-
-while (preg_match($regexp, $page_body, $matches))
-{
-  $geshi = new GeSHi($matches[1], $language);
-  $geshi->set_language_path($geshi_path);
-  $block_new = $geshi->parse_code();
-  // Strip annoying final newline
-  $block_new = preg_replace('|\n&nbsp;<\/pre>|', '</pre>' , $block_new);
-  // Remove style attribute (TODO: Research this in GeSHi)
-  $block_new = preg_replace('| style="font-family:monospace;"|', '' , $block_new);
-  $page_body = preg_replace($regexp, $block_new, $page_body, 1);
-  unset($geshi);    // Clean up
-}
-unset($block_new);  // Clean up
-
-// Apply typographic flourishes
-$page_body = SmartyPants($page_body);
-
-
-/**
- *  Generate Doxygen Body
- *
- */
-$page_id=(isset($argv[1]))?$argv[1]:"";
-$page_desc=(isset($argv[2]))?$argv[2]:"";
-print "/*!\\page ".$page_id." ".$page_desc."\n\\htmlonly\n";
-print $page_body;
-print "\\endhtmlonly\n*/\n";
-
-// ---------------------------------------------------------
-
-/**
- * decode_markdown()
- *
- * Markdown encodes '&', '<' and '>' in detected code
- * blocks, as a convenience. This will restore the
- * encoded entities to ordinary characters, since a
- * downstream transformer (like GeSHi) may not
- * anticipate this.
- *
- **********************************************************/
-
-function decode_markdown($input)
-{
-  $out = FALSE;
-
-  $entities   = array ('|&amp;|'
-                      ,'|&lt;|'
-                      ,'|&gt;|'
-                      );
-  $characters = array ('&'
-                      ,'<'
-                      ,'>'
-                      );
-  $input = preg_replace($entities, $characters, $input);
-  $out = $input;
-
-  return $out;
-}
-
-
-/**
- * ASCIIMathML parser
- * http://tinyurl.com/ASCIIMathPHP
- *
- * @PARAM mtch_arr array - Array of ASCIIMath expressions
- *   as returned by preg_replace_callback([pattern]). First
- *   dimension is the full matched string (with delimiter);
- *   2nd dimension is the undelimited contents (typically
- *   a capture group).
- *
- **********************************************************/
-
-function ASCIIMathPHPCallback($mtch_arr)
-{
-  $txt = trim($mtch_arr[1]);
-
-  include('includes/ASCIIMathPHP-2.0/ASCIIMathPHP-2.0.cfg.php');
-  require_once('includes/ASCIIMathPHP-2.0/ASCIIMathPHP-2.0.class.php');
-
-  static $asciimath;
-
-  if (!isset($asciimath)) $asciimath = new ASCIIMathPHP($symbol_arr);
-
-  $math_attr_arr = array('displaystyle' => 'true');
-
-  $asciimath->setExpr($txt);
-  $asciimath->genMathML($math_attr_arr);
-
-  return($asciimath->getMathML());
-}
-
-/**
- * fix_asciiMath()
- *
- * ASCIIMath pretty-prints its output, with linefeeds
- * and tabs. Causes unexpected behavior in some renderers.
- * This flattens <math> blocks.
- *
- * @PARAM page_body str - The <body> element of an
- * XHTML page to transform.
- *
- **********************************************************/
-
-function fix_asciiMath($page_body)
-{
-  $out = FALSE;
-
-  // Remove linefeeds and whitespace in <math> elements
-  $tags_bad  = array('/(<math.*?>)\n*\s*/'
-                    , '/(<mstyle.*?>)\n*\s*/'
-                    , '/(<\/mstyle>)\n*\s*/'
-                    , '/(<mrow.*?>)\n*\s*/'
-                    , '/(<\/mrow>)\n*\s*/'
-                    , '/(<mo.*?>)\n*\s*/'
-                    , '/(<\/mo>)\n*\s*/'
-                    , '/(<mi.*?>)\n*\s*/'
-                    , '/(<\/mi>)\n*\s*/'
-                    , '/(<mn.*?>)\n*\s*/'
-                    , '/(<\/mn>)\n*\s*/'
-                    , '/(<mtext.*?>)\n*\s*/'
-                    , '/(<\/mtext>)\n*\s*/'
-                    , '/(<msqrt.*?>)\n*\s*/'
-                    , '/(<\/msqrt>)\n*\s*/'
-                    , '/(<mfrac.*?>)\n*\s*/'
-                    , '/(<\/mfrac>)\n*\s*/'
-                    );
-  $tags_good = array( '$1'
-                    , '$1'
-                    , '$1'
-                    , '$1'
-                    , '$1'
-                    , '$1'
-                    , '$1'
-                    , '$1'
-                    , '$1'
-                    , '$1'
-                    , '$1'
-                    , '$1'
-                    , '$1'
-                    , '$1'
-                    , '$1'
-                    , '$1'
-                    , '$1'
-                    );
-  $out = preg_replace($tags_bad, $tags_good, $page_body);
-
-  return $out;
-
-}

examples/gen_example_text.sh

@@ -1,84 +0,0 @@
-#!/bin/bash
-##
-##  Copyright (c) 2010 The WebM project authors. All Rights Reserved.
-##
-##  Use of this source code is governed by a BSD-style license
-##  that can be found in the LICENSE file in the root of the source
-##  tree. An additional intellectual property rights grant can be found
-##  in the file PATENTS.  All contributing project authors may
-##  be found in the AUTHORS file in the root of the source tree.
-##
-
-
-# gen_example_text.sh
-
-self=$0
-
-die_usage() {
-    echo "Usage: $self <example.txt>"
-    exit 1
-}
-
-die() {
-    echo "$@"
-    exit 1
-}
-
-include_block() {
-    local on_block
-    while IFS=$'\n' read -r t_line; do
-        case "$t_line" in
-            \~*\ ${block_name})
-                if [ "x$on_block" == "xyes" ]; then
-                    return 0;
-                else
-                    on_block=yes
-                fi
-                ;;
-            *)
-                if [ "x$on_block" == "xyes" ]; then
-                    echo "$t_line"
-                fi
-                ;;
-        esac
-    done
-    echo "WARNING: failed to find text for block $block_name" >&2
-    return 1
-}
-
-txt=$1
-[ -f "$txt" ] || die_usage
-read -r template < "$txt"
-case "$template" in
-    @TEMPLATE*) template=${txt%/*}/${template##@TEMPLATE } ;;
-    *) die "Failed to parse template name from '$template'" ;;
-esac
-
-fence="~~~~~~~~~"
-fence="${fence}${fence}"
-fence="${fence}${fence}"
-fence="${fence}${fence}"
-while IFS=$'\n' read -r line; do
-    case "$line" in
-        @TEMPLATE*)
-            template=${template##@TEMPLATE }
-            template=${template%.c}.txt
-            ;;
-        @DEFAULT)
-            include_block < "$template"
-            ;;
-        ~~~*)
-            block_name=${line##~* }
-            [ "$block_name" == "INTRODUCTION" ] || echo "$fence"
-            ;;
-        *)  echo "$line"
-            ;;
-    esac
-done < "$txt"
-
-echo
-echo "Putting It All Together"
-echo "======================="
-echo "${fence}"
-${self%/*}/gen_example_code.sh "${txt}"
-echo "${fence}"

examples/includes/ASCIIMathPHP-2.0/ASCIIMathPHP-2.0.cfg.php

@@ -1,218 +0,0 @@
-<?php
-
-$symbol_arr = array(
-
-// Greek symbols
-'alpha' => array( 'input'=>'alpha','tag'=>'mi', 'output'=>'&#' . hexdec('03B1') . ';'),
-'beta'  => array( 'input'=>'beta','tag'=>'mi', 'output'=>'&#' . hexdec('03B2') . ';'),
-'chi'   => array( 'input'=>'chi','tag'=>'mi', 'output'=>'&#' . hexdec('03C7') . ';'),
-'delta' => array( 'input'=>'delta','tag'=>'mi', 'output'=>'&#' . hexdec('03B4') . ';'),
-'Delta' => array( 'input'=>'Delta','tag'=>'mo', 'output'=>'&#' . hexdec('0394') . ';'),
-'epsi'  => array( 'input'=>'epsi','tag'=>'mi', 'output'=>'&#' . hexdec('03B5') . ';'),
-'varepsilon'    => array( 'input'=>'varepsilon','tag'=>'mi', 'output'=>'&#' . hexdec('025B') . ';'),
-'eta'   => array( 'input'=>'eta','tag'=>'mi', 'output'=>'&#' . hexdec('03B7') . ';'),
-'gamma' => array( 'input'=>'gamma','tag'=>'mi', 'output'=>'&#' . hexdec('03B3') . ';'),
-'Gamma' => array( 'input'=>'Gamma','tag'=>'mi', 'output'=>'&#' . hexdec('0393') . ';'),
-'iota'  => array( 'input'=>'iota','tag'=>'mi', 'output'=>'&#' . hexdec('03B9') . ';'),
-'kappa' => array( 'input'=>'kappa','tag'=>'mi', 'output'=>'&#' . hexdec('03BA') . ';'),
-'lambda'    => array( 'input'=>'lambda','tag'=>'mi', 'output'=>'&#' . hexdec('03BB') . ';'),
-'Lambda'    => array( 'input'=>'Lambda','tag'=>'mo', 'output'=>'&#' . hexdec('039B') . ';'),
-'mu'    => array( 'input'=>'mu','tag'=>'mi', 'output'=>'&#' . hexdec('03BC') . ';'),
-'nu'    => array( 'input'=>'nu','tag'=>'mi', 'output'=>'&#' . hexdec('03BD') . ';'),
-'omega' => array( 'input'=>'omega','tag'=>'mi', 'output'=>'&#' . hexdec('03C9') . ';'),
-'Omega' => array( 'input'=>'Omega','tag'=>'mo', 'output'=>'&#' . hexdec('03A9') . ';'),
-'phi'   => array( 'input'=>'phi','tag'=>'mi', 'output'=>'&#' . hexdec('03C6') . ';'),
-'varphi'    => array( 'input'=>'varphi','tag'=>'mi', 'output'=>'&#' . hexdec('03D5') . ';'),
-'Phi'   => array( 'input'=>'Phi','tag'=>'mo', 'output'=>'&#' . hexdec('03A6') . ';'),
-'pi'    => array( 'input'=>'pi','tag'=>'mi', 'output'=>'&#' . hexdec('03C0') . ';'),
-'Pi'    => array( 'input'=>'Pi','tag'=>'mo', 'output'=>'&#' . hexdec('03A0') . ';'),
-'psi'   => array( 'input'=>'psi','tag'=>'mi', 'output'=>'&#' . hexdec('03C8') . ';'),
-'rho'   => array( 'input'=>'rho','tag'=>'mi', 'output'=>'&#' . hexdec('03C1') . ';'),
-'sigma' => array( 'input'=>'sigma','tag'=>'mi', 'output'=>'&#' . hexdec('03C3') . ';'),
-'Sigma' => array( 'input'=>'Sigma','tag'=>'mo', 'output'=>'&#' . hexdec('03A3') . ';'),
-'tau'   => array( 'input'=>'tau','tag'=>'mi', 'output'=>'&#' . hexdec('03C4') . ';'),
-'theta' => array( 'input'=>'theta','tag'=>'mi', 'output'=>'&#' . hexdec('03B8') . ';'),
-'vartheta'  => array( 'input'=>'vartheta','tag'=>'mi', 'output'=>'&#' . hexdec('03D1') . ';'),
-'Theta' => array( 'input'=>'Theta','tag'=>'mo', 'output'=>'&#' . hexdec('0398') . ';'),
-'upsilon'   => array( 'input'=>'upsilon','tag'=>'mi', 'output'=>'&#' . hexdec('03C5') . ';'),
-'xi'    => array( 'input'=>'xi','tag'=>'mi', 'output'=>'&#' . hexdec('03BE') . ';'),
-'Xi'    => array( 'input'=>'alpha','tag'=>'mo', 'output'=>'&#' . hexdec('039E') . ';'),
-'zeta'  => array( 'input'=>'zeta','tag'=>'mi', 'output'=>'&#' . hexdec('03B6') . ';'),
-
-// Binary operation symbols
-'*'     => array( 'input'=>'*','tag'=>'mo', 'output'=>'&#' . hexdec('22C5') . ';'),
-'**'    => array( 'input'=>'**','tag'=>'mo', 'output'=>'&#' . hexdec('22C6') . ';'),
-'//'    => array( 'input'=>'//','tag'=>'mo', 'output'=>'/'),
-'\\\\'  => array( 'input'=>'\\\\','tag'=>'mo', 'output'=>'\\'),
-'xx'    => array( 'input'=>'xx','tag'=>'mo', 'output'=>'&#' . hexdec('00D7') . ';'),
-'-:'    => array( 'input'=>'-:','tag'=>'mo', 'output'=>'&#' . hexdec('00F7') . ';'),
-'@'     => array( 'input'=>'@','tag'=>'mo', 'output'=>'&#' . hexdec('2218') . ';'),
-'o+'    => array( 'input'=>'o+','tag'=>'mo', 'output'=>'&#' . hexdec('2295') . ';'),
-'ox'    => array( 'input'=>'ox','tag'=>'mo', 'output'=>'&#' . hexdec('2297') . ';'),
-'sum'   => array( 'input'=>'sum','tag'=>'mo', 'output'=>'&#' . hexdec('2211') . ';', 'underover'=>TRUE),
-'prod'  => array( 'input'=>'prod','tag'=>'mo', 'output'=>'&#' . hexdec('220F') . ';', 'underover'=>TRUE),
-'^^'    => array( 'input'=>'^^','tag'=>'mo', 'output'=>'&#' . hexdec('2227') . ';'),
-'^^^'   => array( 'input'=>'^^^','tag'=>'mo', 'output'=>'&#' . hexdec('22C0') . ';', 'underover'=>TRUE),
-'vv'    => array( 'input'=>'vv','tag'=>'mo', 'output'=>'&#' . hexdec('2228') . ';'),
-'vvv'   => array( 'input'=>'vvv','tag'=>'mo', 'output'=>'&#' . hexdec('22C1') . ';', 'underover'=>TRUE),
-'nn'    => array( 'input'=>'nn','tag'=>'mo', 'output'=>'&#' . hexdec('2229') . ';'),
-'nnn'   => array( 'input'=>'nnn','tag'=>'mo', 'output'=>'&#' . hexdec('22C5') . ';', 'underover'=>TRUE),
-'uu'    => array( 'input'=>'uu','tag'=>'mo', 'output'=>'&#' . hexdec('222A') . ';'),
-'uuu'   => array( 'input'=>'uuu','tag'=>'mo', 'output'=>'&#' . hexdec('22C3') . ';', 'underover'=>TRUE),
-
-// Binary relation symbols
-'!='    => array( 'input'=>'!=','tag'=>'mo', 'output'=>'&#' . hexdec('2260') . ';'),
-':='    => array( 'input'=>':=','tag'=>'mo', 'output'=>':=' ),              /* 2005-06-05 wes */
-'<'     => array( 'input'=>'<','tag'=>'mo', 'output'=>'&lt;'),
-'lt'    => array( 'input'=>'lt','tag'=>'mo', 'output'=>'&lt;'),             /* 2005-06-05 wes */
-'<='    => array( 'input'=>'<=','tag'=>'mo', 'output'=>'&#' . hexdec('2264') . ';'),
-'lt='   => array( 'input'=>'lt=','tag'=>'mo', 'output'=>'&#' . hexdec('2264') . ';'),
-'le'    => array( 'input'=>'le','tag'=>'mo', 'output'=>'&#' . hexdec('2264') . ';'),    /* 2005-06-05 wes */
-'>'     => array( 'input'=>'>','tag'=>'mo', 'output'=>'&gt;'),
-'>='    => array( 'input'=>'>=','tag'=>'mo', 'output'=>'&#' . hexdec('2265') . ';'),
-'qeq'   => array( 'input'=>'geq','tag'=>'mo', 'output'=>'&#' . hexdec('2265') . ';'),
-'-<'    => array( 'input'=>'-<','tag'=>'mo', 'output'=>'&#' . hexdec('227A') . ';'),
-'-lt'   => array( 'input'=>'-lt','tag'=>'mo', 'output'=>'&#' . hexdec('227A') . ';'),
-'>-'    => array( 'input'=>'>-','tag'=>'mo', 'output'=>'&#' . hexdec('227B') . ';'),
-'in'    => array( 'input'=>'in','tag'=>'mo', 'output'=>'&#' . hexdec('2208') . ';'),
-'!in'   => array( 'input'=>'!in','tag'=>'mo', 'output'=>'&#' . hexdec('2209') . ';'),
-'sub'   => array( 'input'=>'sub','tag'=>'mo', 'output'=>'&#' . hexdec('2282') . ';'),
-'sup'   => array( 'input'=>'sup','tag'=>'mo', 'output'=>'&#' . hexdec('2283') . ';'),
-'sube'  => array( 'input'=>'sube','tag'=>'mo', 'output'=>'&#' . hexdec('2286') . ';'),
-'supe'  => array( 'input'=>'supe','tag'=>'mo', 'output'=>'&#' . hexdec('2287') . ';'),
-'-='    => array( 'input'=>'-=','tag'=>'mo', 'output'=>'&#' . hexdec('2261') . ';'),
-'~='    => array( 'input'=>'~=','tag'=>'mo', 'output'=>'&#' . hexdec('2245') . ';'),
-'~~'    => array( 'input'=>'~~','tag'=>'mo', 'output'=>'&#' . hexdec('2248') . ';'),
-'prop'  => array( 'input'=>'prop','tag'=>'mo', 'output'=>'&#' . hexdec('221D') . ';'),
-
-// Logical symbols
-'and'   => array( 'input'=>'and','tag'=>'mtext', 'output'=>'and', 'space'=>'1ex'),
-'or'    => array( 'input'=>'or','tag'=>'mtext', 'output'=>'or', 'space'=>'1ex'),
-'not'   => array( 'input'=>'not','tag'=>'mo', 'output'=>'&#' . hexdec('00AC') . ';'),
-'=>'    => array( 'input'=>'=>','tag'=>'mo', 'output'=>'&#' . hexdec('21D2') . ';'),
-'if'    => array( 'input'=>'if','tag'=>'mo', 'output'=>'if', 'space'=>'1ex'),
-'iff'   => array( 'input'=>'iff','tag'=>'mo', 'output'=>'&#' . hexdec('21D4') . ';'),
-'<=>'   => array( 'input'=>'iff','tag'=>'mo', 'output'=>'&#' . hexdec('21D4') . ';'), /* 2005-06-07 wes */
-'AA'    => array( 'input'=>'AA','tag'=>'mo', 'output'=>'&#' . hexdec('2200') . ';'),
-'EE'    => array( 'input'=>'EE','tag'=>'mo', 'output'=>'&#' . hexdec('2203') . ';'),
-'_|_'   => array( 'input'=>'_|_','tag'=>'mo', 'output'=>'&#' . hexdec('22A5') . ';'),
-'TT'    => array( 'input'=>'TT','tag'=>'mo', 'output'=>'&#' . hexdec('22A4') . ';'),
-'|-'    => array( 'input'=>'|-','tag'=>'mo', 'output'=>'&#' . hexdec('22A2') . ';'),
-'|='    => array( 'input'=>'|=','tag'=>'mo', 'output'=>'&#' . hexdec('22A8') . ';'),
-
-// Miscellaneous symbols
-'ang'   => array('input'=>'ang','tag'=>'mo','output'=>'&#' . hexdec('2220') . ';'),
-'deg'   => array('input'=>'deg','tag'=>'mo','output'=>'&#' . hexdec('00B0') . ';'),
-'int'   => array( 'input'=>'int','tag'=>'mo', 'output'=>'&#' . hexdec('222B') . ';'),
-'dx'    => array( 'input'=>'dx','tag'=>'mi', 'output'=>'{:d x:}', 'definition'=>TRUE), /* 2005-06-11 wes */
-'dy'    => array( 'input'=>'dy','tag'=>'mi', 'output'=>'{:d y:}', 'definition'=>TRUE), /* 2005-06-11 wes */
-'dz'    => array( 'input'=>'dz','tag'=>'mi', 'output'=>'{:d z:}', 'definition'=>TRUE), /* 2005-06-11 wes */
-'dt'    => array( 'input'=>'dt','tag'=>'mi', 'output'=>'{:d t:}', 'definition'=>TRUE), /* 2005-06-11 wes */
-'oint'  => array( 'input'=>'oint','tag'=>'mo', 'output'=>'&#' . hexdec('222E') . ';'),
-'del'   => array( 'input'=>'del','tag'=>'mo', 'output'=>'&#' . hexdec('2202') . ';'),
-'grad'  => array( 'input'=>'grad','tag'=>'mo', 'output'=>'&#' . hexdec('2207') . ';'),
-'+-'    => array( 'input'=>'+-','tag'=>'mo', 'output'=>'&#' . hexdec('00B1') . ';'),
-'O/'    => array( 'input'=>'0/','tag'=>'mo', 'output'=>'&#' . hexdec('2205') . ';'),
-'oo'    => array( 'input'=>'oo','tag'=>'mo', 'output'=>'&#' . hexdec('221E') . ';'),
-'aleph' => array( 'input'=>'aleph','tag'=>'mo', 'output'=>'&#' . hexdec('2135') . ';'),
-'...'   => array( 'input'=>'int','tag'=>'mo', 'output'=>'...'),
-'~' => array( 'input'=>'!~','tag'=>'mo', 'output'=>'&#' . hexdec('0020') . ';'),
-'\\ '   => array( 'input'=>'~','tag'=>'mo', 'output'=>'&#' . hexdec('00A0') . ';'),
-'quad'  => array( 'input'=>'quad','tag'=>'mo', 'output'=>'&#' . hexdec('00A0') . ';&#' . hexdec('00A0') . ';'),
-'qquad' => array( 'input'=>'qquad','tag'=>'mo', 'output'=>  '&#' . hexdec('00A0') . ';&#' . hexdec('00A0') . ';&#' . hexdec('00A0') . ';'),
-'cdots' => array( 'input'=>'cdots','tag'=>'mo', 'output'=>'&#' . hexdec('22EF') . ';'),
-'vdots' => array( 'input'=>'vdots','tag'=>'mo', 'output'=>'&#' . hexdec('22EE') . ';'), /* 2005-06-11 wes */
-'ddots' => array( 'input'=>'ddots','tag'=>'mo', 'output'=>'&#' . hexdec('22F1') . ';'), /* 2005-06-11 wes */
-'diamond'   => array( 'input'=>'diamond','tag'=>'mo', 'output'=>'&#' . hexdec('22C4') . ';'),
-'square'    => array( 'input'=>'square','tag'=>'mo', 'output'=>'&#' . hexdec('25A1') . ';'),
-'|_'    => array( 'input'=>'|_','tag'=>'mo', 'output'=>'&#' . hexdec('230A') . ';'),
-'_|'    => array( 'input'=>'_|','tag'=>'mo', 'output'=>'&#' . hexdec('230B') . ';'),
-'|~'    => array( 'input'=>'|~','tag'=>'mo', 'output'=>'&#' . hexdec('2308') . ';'),
-'~|'    => array( 'input'=>'~|','tag'=>'mo', 'output'=>'&#' . hexdec('2309') . ';'),
-'CC'    => array( 'input'=>'CC','tag'=>'mo', 'output'=>'&#' . hexdec('2102') . ';'),
-'NN'    => array( 'input'=>'NN','tag'=>'mo', 'output'=>'&#' . hexdec('2115') . ';'),
-'QQ'    => array( 'input'=>'QQ','tag'=>'mo', 'output'=>'&#' . hexdec('211A') . ';'),
-'RR'    => array( 'input'=>'RR','tag'=>'mo', 'output'=>'&#' . hexdec('211D') . ';'),
-'ZZ'    => array( 'input'=>'ZZ','tag'=>'mo', 'output'=>'&#' . hexdec('2124') . ';'),
-
-// Standard functions
-'lim'   => array( 'input'=>'lim','tag'=>'mo', 'output'=>'lim', 'underover'=>TRUE),
-'Lim'   => array( 'input'=>'Lim','tag'=>'mo', 'output'=>'Lim', 'underover'=>TRUE), /* 2005-06-11 wes */
-'sin'   => array( 'input'=>'sin','tag'=>'mo', 'output'=>'sin', 'unary'=>TRUE, 'func'=>TRUE),
-'cos'   => array( 'input'=>'cos', 'tag'=>'mo', 'output'=>'cos', 'unary'=>TRUE, 'func'=>TRUE),
-'tan'   => array( 'input'=>'tan', 'tag'=>'mo', 'output'=>'tan', 'unary'=>TRUE, 'func'=>TRUE),
-'arcsin'    => array( 'input'=>'arcsin','tag'=>'mo', 'output'=>'arcsin', 'unary'=>TRUE, 'func'=>TRUE), //2006-9-7 DL
-'arccos'    => array( 'input'=>'arccos', 'tag'=>'mo', 'output'=>'arccos', 'unary'=>TRUE, 'func'=>TRUE), //2006-9-7 DL
-'arctan'    => array( 'input'=>'arctan', 'tag'=>'mo', 'output'=>'arctan', 'unary'=>TRUE, 'func'=>TRUE), //2006-9-7 DL
-'sinh'  => array( 'input'=>'sinh','tag'=>'mo', 'output'=>'sinh', 'unary'=>TRUE, 'func'=>TRUE),
-'cosh'  => array( 'input'=>'cosh', 'tag'=>'mo', 'output'=>'cosh', 'unary'=>TRUE, 'func'=>TRUE),
-'tanh'  => array( 'input'=>'tanh', 'tag'=>'mo', 'output'=>'tanh', 'unary'=>TRUE, 'func'=>TRUE),
-'cot'   => array( 'input'=>'cot','tag'=>'mo', 'output'=>'cot', 'unary'=>TRUE, 'func'=>TRUE),
-'sec'   => array( 'input'=>'sec', 'tag'=>'mo', 'output'=>'sec', 'unary'=>TRUE, 'func'=>TRUE),
-'csc'   => array( 'input'=>'csc', 'tag'=>'mo', 'output'=>'csc', 'unary'=>TRUE, 'func'=>TRUE),
-'coth'  => array( 'input'=>'coth','tag'=>'mo', 'output'=>'coth', 'unary'=>TRUE, 'func'=>TRUE),
-'sech'  => array( 'input'=>'sech', 'tag'=>'mo', 'output'=>'sech', 'unary'=>TRUE, 'func'=>TRUE),
-'csch'  => array( 'input'=>'csch', 'tag'=>'mo', 'output'=>'csch', 'unary'=>TRUE, 'func'=>TRUE),
-'log'   => array( 'input'=>'log', 'tag'=>'mo', 'output'=>'log', 'unary'=>TRUE, 'func'=>TRUE),
-'ln'    => array( 'input'=>'ln', 'tag'=>'mo', 'output'=>'ln', 'unary'=>TRUE, 'func'=>TRUE),
-'det'   => array( 'input'=>'det', 'tag'=>'mo', 'output'=>'det', 'unary'=>TRUE, 'func'=>TRUE),
-'dim'   => array( 'input'=>'dim', 'tag'=>'mo', 'output'=>'dim'),
-'mod'   => array( 'input'=>'mod', 'tag'=>'mo', 'output'=>'mod'),
-'gcd'   => array( 'input'=>'gcd', 'tag'=>'mo', 'output'=>'gcd', 'unary'=>TRUE, 'func'=>TRUE),
-'lcm'   => array( 'input'=>'lcm', 'tag'=>'mo', 'output'=>'lcm', 'unary'=>TRUE, 'func'=>TRUE),
-'lub'   => array( 'input'=>'lub', 'tag'=>'mo', 'output'=>'lub'), /* 2005-06-11 wes */
-'glb'   => array( 'input'=>'glb', 'tag'=>'mo', 'output'=>'glb'), /* 2005-06-11 wes */
-'min'   => array( 'input'=>'min', 'tag'=>'mo', 'output'=>'min', 'underover'=>TRUE), /* 2005-06-11 wes */
-'max'   => array( 'input'=>'max', 'tag'=>'mo', 'output'=>'max', 'underover'=>TRUE), /* 2005-06-11 wes */
-'f' => array( 'input'=>'f','tag'=>'mi', 'output'=>'f', 'unary'=>TRUE, 'func'=>TRUE), //2006-9-7 DL
-'g' => array( 'input'=>'g', 'tag'=>'mi', 'output'=>'g', 'unary'=>TRUE, 'func'=>TRUE), //2006-9-7 DL
-
-// Arrows
-'uarr'  => array( 'input'=>'uarr', 'tag'=>'mo', 'output'=>'&#' . hexdec('2191') . ';'),
-'darr'  => array( 'input'=>'darr', 'tag'=>'mo', 'output'=>'&#' . hexdec('2193') . ';'),
-'rarr'  => array( 'input'=>'rarr', 'tag'=>'mo', 'output'=>'&#' . hexdec('2192') . ';'),
-'->'    => array( 'input'=>'->', 'tag'=>'mo', 'output'=>'&#' . hexdec('2192') . ';'),
-'|->'   => array( 'input'=>'|->', 'tag'=>'mo', 'output'=>'&#' . hexdec('21A6') . ';'), /* 2005-06-11 wes */
-'larr'  => array( 'input'=>'larr', 'tag'=>'mo', 'output'=>'&#' . hexdec('2190') . ';'),
-'harr'  => array( 'input'=>'harr', 'tag'=>'mo', 'output'=>'&#' . hexdec('2194') . ';'),
-'rArr'  => array( 'input'=>'rArr', 'tag'=>'mo', 'output'=>'&#' . hexdec('21D2') . ';'),
-'lArr'  => array( 'input'=>'lArr', 'tag'=>'mo', 'output'=>'&#' . hexdec('21D0') . ';'),
-'hArr'  => array( 'input'=>'hArr', 'tag'=>'mo', 'output'=>'&#' . hexdec('21D4') . ';'),
-
-// Commands with argument
-'sqrt'  => array( 'input'=>'sqrt', 'tag'=>'msqrt', 'output'=>'sqrt', 'unary'=>TRUE ),
-'root'  => array( 'input'=>'root', 'tag'=>'mroot', 'output'=>'root', 'binary'=>TRUE ),
-'frac'  => array( 'input'=>'frac', 'tag'=>'mfrac', 'output'=>'/', 'binary'=>TRUE),
-'/'     => array( 'input'=>'/', 'tag'=>'mfrac', 'output'=>'/', 'infix'=>TRUE),
-'_'     => array( 'input'=>'_', 'tag'=>'msub', 'output'=>'_', 'infix'=>TRUE),
-'^'     => array( 'input'=>'^', 'tag'=>'msup', 'output'=>'^', 'infix'=>TRUE),
-'hat'   => array( 'input'=>'hat', 'tag'=>'mover', 'output'=>'&#' . hexdec('005E') . ';', 'unary'=>TRUE, 'acc'=>TRUE),
-'bar'   => array( 'input'=>'bar', 'tag'=>'mover', 'output'=>'&#' . hexdec('00AF') . ';', 'unary'=>TRUE, 'acc'=>TRUE),
-'vec'   => array( 'input'=>'vec', 'tag'=>'mover', 'output'=>'&#' . hexdec('2192') . ';', 'unary'=>TRUE, 'acc'=>TRUE),
-'dot'   => array( 'input'=>'dot', 'tag'=>'mover', 'output'=>'.', 'unary'=>TRUE, 'acc'=>TRUE),
-'ddot'  => array( 'input'=>'ddot', 'tag'=>'mover', 'output'=>'..', 'unary'=>TRUE, 'acc'=>TRUE),
-'ul'    => array( 'input'=>'ul', 'tag'=>'munder', 'output'=>'&#' . hexdec('0332') . ';', 'unary'=>TRUE, 'acc'=>TRUE),
-'avec'  => array( 'input'=>'avec', 'tag'=>'munder', 'output'=>'~', 'unary'=>TRUE, 'acc'=>TRUE),
-'text'  => array( 'input'=>'text', 'tag'=>'mtext', 'output'=>'text', 'unary'=>TRUE),
-'mbox'  => array( 'input'=>'mbox', 'tag'=>'mtext', 'output'=>'mbox', 'unary'=>TRUE),
-'"' => array( 'input'=>'"', 'tag'=>'mtext','output'=>'mbox', 'unary'=>TRUE),
-
-/* 2005-06-05 wes: added stackrel */
-'stackrel' => array( 'input'=>'stackrel', 'tag'=>'mover', 'output'=>'stackrel', 'binary'=>TRUE),
-
-// Grouping brackets
-'('     => array( 'input'=>'(', 'tag'=>'mo', 'output'=>'(', 'left_bracket'=>TRUE),
-')'     => array( 'input'=>')', 'tag'=>'mo', 'output'=>')', 'right_bracket'=>TRUE),
-'['     => array( 'input'=>'[', 'tag'=>'mo', 'output'=>'[', 'left_bracket'=>TRUE),
-']'     => array( 'input'=>']', 'tag'=>'mo', 'output'=>']', 'right_bracket'=>TRUE),
-'{'     => array( 'input'=>'{', 'tag'=>'mo', 'output'=>'{', 'left_bracket'=>TRUE),
-'}'     => array( 'input'=>'}', 'tag'=>'mo', 'output'=>'}', 'right_bracket'=>TRUE),
-'(:'    => array( 'input'=>'(:', 'tag'=>'mo', 'output'=>'&#' . hexdec('2329') . ';', 'left_bracket'=>TRUE),
-':)'    => array( 'input'=>':)', 'tag'=>'mo', 'output'=>'&#' . hexdec('232A') . ';', 'right_bracket'=>TRUE),
-'{:'    => array( 'input'=>'{:', 'tag'=>'mo', 'output'=>'{:', 'left_bracket'=>TRUE, 'invisible'=>TRUE),
-':}'    => array( 'input'=>':}', 'tag'=>'mo', 'output'=>':}', 'right_bracket'=>TRUE ,'invisible'=>TRUE),
-'<<'    => array( 'input'=>'<<', 'tag'=>'mo', 'output'=>'&#' . hexdec('2329') . ';', 'left_bracket'=>TRUE), // 2005-06-07 wes
-'>>'    => array( 'input'=>'>>', 'tag'=>'mo', 'output'=>'&#' . hexdec('232A') . ';', 'right_bracket'=>TRUE) // 2005-06-07 wes
-);
-
-?>

examples/includes/ASCIIMathPHP-2.0/htmlMathML.js

@@ -1,86 +0,0 @@
-/* March 19, 2004 MathHTML (c) Peter Jipsen http://www.chapman.edu/~jipsen
-This program is free software; you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation; either version 2 of the License, or (at
-your option) any later version.
-This program is distributed in the hope that it will be useful, but 
-WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY 
-or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License 
-(at http://www.gnu.org/copyleft/gpl.html) for more details.*/
-
-function convertMath(node) {// for Gecko
-  if (node.nodeType==1) {
-    var newnode = 
-      document.createElementNS("http://www.w3.org/1998/Math/MathML",
-        node.nodeName.toLowerCase());
-    for(var i=0; i < node.attributes.length; i++) {
-	    if (node.attributes[i].nodeName == 'displaystyle') {
-	      newnode.setAttribute(node.attributes[i].nodeName,node.attributes[i].nodeValue);
-	    }
-    }
-    for (var i=0; i<node.childNodes.length; i++) {
-      var st = node.childNodes[i].nodeValue;
-      if (st==null || st.slice(0,1)!=" " && st.slice(0,1)!="\n") 
-        newnode.appendChild(convertMath(node.childNodes[i]));
-    }
-    return newnode;
-  }
-  else return node;
-}
-function convert() {
-	
-	if (document.createElementNS) {
-		var mmlnode = document.getElementsByTagName("span");
-		
-		for (var i=0; i<mmlnode.length; i++) {
-			var tmp_node = mmlnode[i];
-			if (tmp_node.className == 'asciimath') {
-				tmp_node.replaceChild(convertMath(tmp_node.firstChild),tmp_node.firstChild);
-				/*
-				for (var j=0;j<tmp_node.childNodes.length;j++) {
-					if (tmp_node.childNodes[j].nodeType != 3) {
-						
-					}
-				}
-				*/
-			}
-		}
-	} else {
-		var st,node,newnode;
-		var mmlnode = document.getElementsByTagName("math");
-		
-	  	for (var i=0; i<mmlnode.length; i++) {
-			var str = "";
-			node = mmlnode[i];
-			while (node.nodeName!="/MATH" && node.nextSibling) {
-				st = node.nodeName.toLowerCase();
-				if (st=="#text") { 
-					str += node.nodeValue;
-				} else {
-					str += (st.slice(0,1)=="/" ? "</m:"+st.slice(1) : "<m:"+st);
-					if (st.slice(0,1)!="/") {
-						for(var j=0; j < node.attributes.length; j++) {
-							if (node.attributes[j].nodeValue!="italic" &&
-							 node.attributes[j].nodeValue!="" &&
-							 node.attributes[j].nodeValue!="inherit" &&
-							 node.attributes[j].nodeValue!=undefined) {
-							 str += " "+node.attributes[j].nodeName+"="+
-							     "\""+node.attributes[j].nodeValue+"\"";
-							}
-						}
-					}
-					str += ">";
-				}
-				node = node.nextSibling;
-				node.parentNode.removeChild(node.previousSibling);
-			}
-			
-			if (str != '') {
-				str += "</m:math>";
-				newnode = document.createElement("span");
-				node.parentNode.replaceChild(newnode,node);
-				newnode.innerHTML = str;
-			}
-		}
-	}
-}

examples/includes/HTML-Toc-0.91/.gitattributes

@@ -1 +0,0 @@
-* -crlf

examples/includes/HTML-Toc-0.91/Changes

@@ -1,26 +0,0 @@
-Revision history for Perl extension HTML::Toc.
-
-2001-09-03   Freddy Vulto <fvu@fvu.myweb.nl>
-
-	Release 0.91
-
-	- Tested on Cygwin.
-	- Used Unix file type for source files.
-	- Updated documentation.
-	- Prohibited call with undefined parameter to HTML::Parser->parse() from
-	  HTML::_tokenTocEndParser->parse() which caused havoc with version 3.25
-	  of HTML::Parser.
-	- Specified 'HTML::Parser' as module that needs to be available in order
-	  to use HTML::Toc.
-	- Added protected method HTML::TocGenerator::_setActiveAnchorName().
-	  This method replaces the incongruous access of 
-	  'HTML::TocUpdator::_doDeleteTokens' by HTML::TocGenerator.
-	  HTML::TocUpdator now overrides '_setActiveAnchorName()' to allow
-	  the ancestor call to HTML::TocGenerator only when '_doDeleteTokens'
-	  equals false.
-
-2001-08-09   Freddy Vulto <fvu@fvu.myweb.nl>
-
-	Release 0.90
-
-	- First release.

examples/includes/HTML-Toc-0.91/MANIFEST

@@ -1,26 +0,0 @@
-Changes
-Toc.pod
-Toc.pm
-TocGenerator.pm
-TocInsertor.pm
-TocUpdator.pm
-Makefile.PL
-MANIFEST
-t/extend.t
-t/format.t
-t/generate.t
-t/insert.t
-t/manualTest.t
-t/options.t
-t/podExamples.t
-t/propagate.t
-t/siteMap.t
-t/update.t
-t/ManualTest/manualTest1.htm
-t/SiteMap/index.htm
-t/SiteMap/SubDir1/index.htm
-t/SiteMap/SubDir1/SubSubDir1/index.htm
-t/SiteMap/SubDir2/index.htm
-t/SiteMap/SubDir2/SubSubDir1/index.htm
-t/SiteMap/SubDir2/SubSubDir2/index.htm
-t/SiteMap/SubDir3/index.htm

examples/includes/HTML-Toc-0.91/Makefile.PL

@@ -1,8 +0,0 @@
-use ExtUtils::MakeMaker;
-
-WriteMakefile(
-    'NAME'		      => 'HTML::Toc',
-    'VERSION_FROM'	=> 'Toc.pm',
-    'PREREQ_PM'		=> {'HTML::Parser' => 0},
-	 'MAN3PODS'       => {},
-);

examples/includes/HTML-Toc-0.91/Toc.pm

@@ -1,549 +0,0 @@
-#=== HTML::Toc ================================================================
-# function: HTML Table of Contents
-
-
-package HTML::Toc;
-
-
-use strict;
-
-
-BEGIN {
-	use vars qw($VERSION);
-
-	$VERSION = '0.91';
-}
-
-
-use constant FILE_FILTER             => '.*';
-use constant GROUP_ID_H              => 'h';
-use constant LEVEL_1                 => 1;
-use constant NUMBERING_STYLE_DECIMAL => 'decimal';
-
-	# Templates
-
-	# Anchor templates
-use constant TEMPLATE_ANCHOR_NAME       => '$groupId."-".$node';
-use constant TEMPLATE_ANCHOR_HREF_BEGIN       => 
-					'"<a href=#$anchorName>"';
-use constant TEMPLATE_ANCHOR_HREF_BEGIN_FILE  => 
-					'"<a href=$file#$anchorName>"';
-use constant TEMPLATE_ANCHOR_HREF_END         => '"</a>"';
-use constant TEMPLATE_ANCHOR_NAME_BEGIN => 
-					'"<a name=$anchorName>"';
-use constant TEMPLATE_ANCHOR_NAME_END   => '"</a>"';
-use constant TOKEN_UPDATE_BEGIN_OF_ANCHOR_NAME_BEGIN => 
-					'<!-- #BeginTocAnchorNameBegin -->';
-use constant TOKEN_UPDATE_END_OF_ANCHOR_NAME_BEGIN   => 
-					'<!-- #EndTocAnchorNameBegin -->';
-use constant TOKEN_UPDATE_BEGIN_OF_ANCHOR_NAME_END => 
-					'<!-- #BeginTocAnchorNameEnd -->';
-use constant TOKEN_UPDATE_END_OF_ANCHOR_NAME_END   => 
-					'<!-- #EndTocAnchorNameEnd -->';
-use constant TOKEN_UPDATE_BEGIN_NUMBER      => 
-					'<!-- #BeginTocNumber -->';
-use constant TOKEN_UPDATE_END_NUMBER        => 
-					'<!-- #EndTocNumber -->';
-use constant TOKEN_UPDATE_BEGIN_TOC         => 
-					'<!-- #BeginToc -->';
-use constant TOKEN_UPDATE_END_TOC           => 
-					'<!-- #EndToc -->';
-
-use constant TEMPLATE_TOKEN_NUMBER      => '"$node &nbsp;"';
-
-	# Level templates
-use constant TEMPLATE_LEVEL             => '"<li>$text\n"';
-use constant TEMPLATE_LEVEL_BEGIN       => '"<ul>\n"';
-use constant TEMPLATE_LEVEL_END         => '"</ul>\n"';
-
-
-END {}
-
-
-#--- HTML::Toc::new() ---------------------------------------------------------
-# function: Constructor
-
-sub new {
-		# Get arguments
-	my ($aType) = @_;
-		# Local variables
-	my $self;
-
-	$self = bless({}, $aType);
-		# Default to empty 'options' array
-	$self->{options} = {};
-		# Empty toc
-	$self->{_toc} = "";
-		# Hash reference to array for each groupId, each array element
-		# referring to the group of the level indicated by the array index.
-		# For example, with the default 'tokenGroups', '_levelGroups' would
-		# look like: 
-		#
-		# {'h'} => [\$group1, \$group2, \$group3, \$group4, \$group5, \$group6];
-		#
-	$self->{_levelGroups} = undef;
-		# Set default options
-	$self->_setDefaults();
-	return $self;
-}  # new()
-
-
-#--- HTML::Toc::_compareLevels() ----------------------------------------------
-# function: Compare levels.
-# args:     - $aLevel: pointer to level
-#           - $aGroupLevel
-#           - $aPreviousLevel
-#           - $aPreviousGroupLevel
-# returns:  0 if new level equals previous level, 1 if new level exceeds
-#           previous level, -1 if new level is smaller then previous level.
-
-sub _compareLevels {
-		# Get arguments
-	my (
-		$self, $aLevel, $aPreviousLevel, $aGroupLevel, $aPreviousGroupLevel 
-	) = @_;
-		# Local variables
-	my ($result);
-		# Levels equals?
-	if (
-		($aLevel == $aPreviousLevel) &&
-		($aGroupLevel == $aPreviousGroupLevel)
-	) {
-		# Yes, levels are equals;
-			# Indicate so
-		$result = 0;
-	}
-	else {
-		# No, levels differ;
-			# Bias to new level being smaller than previous level;
-		$result = -1;
-			# Must groups not be nested and do group levels differ?
-		if (
-			($self->{options}{'doNestGroup'} == 0) &&
-			($aGroupLevel != $aPreviousGroupLevel)
-		) {
-			# Yes, groups must be kept apart and the group levels differ;
-				# Level is greater than previous level?
-			if (
-				($aLevel > $aPreviousLevel)
-			) {
-				# Yes, level is greater than previous level;
-					# Indicate so
-				$result = 1;
-			}
-		}
-		else {
-			# No, group must be nested;
-				# Level is greater than previous level?
-			if (
-				($aLevel > $aPreviousLevel) ||
-				($aGroupLevel > $aPreviousGroupLevel)
-			) {
-				# Yes, level is greater than previous level;
-					# Indicate so
-				$result = 1;
-			}
-		}
-	}
-		# Return value
-	return $result;
-}  # _compareLevels()
-
-
-#--- HTML::TocGenerator::_formatLevelIndent() ---------------------------------
-# function: Format indent.
-# args:     - $aText: text to indent
-#           - $aLevel: Level.
-#           - $aGroupLevel: Group level.
-#           - $aAdd
-#           - $aGlobalLevel
-
-sub _formatLevelIndent {
-		# Get arguments
-	my ($self, $aText, $aAdd, $aGlobalLevel) = @_;
-		# Local variables
-	my ($levelIndent, $indent, $nrOfIndents);
-		# Alias indentation option
-	$levelIndent = $self->{options}{'levelIndent'}; #=~ s/[0-9]+/&/;
-		# Calculate number of indents
-	$nrOfIndents = ($aGlobalLevel + $aAdd) * $levelIndent;
-		# Assemble indents
-	$indent = pack("A$nrOfIndents");
-		# Return value
-	return $indent . $aText;
-}  # _formatLevelIndent()
-
-
-#--- HTML::Toc::_formatToc() --------------------------------------------------
-# function: Format ToC.
-# args:     - aPreviousLevel
-#           - aPreviousGroupLevel
-#           - aToc: ToC to format.
-#           - aHeaderLines
-# note:     Recursive function this is.
-
-sub _formatToc {
-		# Get arguments
-	my (
-		$self, $aPreviousLevel, $aPreviousGroupLevel, $aToc, $aHeaderLines, 
-		$aGlobalLevel
-	) = @_;
-		# Local variables
-	my ($level, $groupLevel, $line, $groupId, $text, $compareStatus);
-	my ($anchorName, $globalLevel, $node, $sequenceNr);
-
-	LOOP: {
-			# Lines need processing?
-		while (scalar(@$aHeaderLines) > 0) {
-			# Yes, lines need processing;
-				# Get line
-			$line = shift @$aHeaderLines;
-				
-				# Determine levels
-			($level, $groupLevel, $groupId, $node, $sequenceNr, 
-			$anchorName, $text) = split(
-				/ /, $line, 7
-			);
-				# Must level and group be processed?
-			if (
-				($level =~ m/$self->{options}{'levelToToc'}/) &&
-				($groupId =~ m/$self->{options}{'groupToToc'}/)
-			) {
-				# Yes, level must be processed;
-					# Compare levels
-				$compareStatus = $self->_compareLevels(
-					$level, $aPreviousLevel, $groupLevel, $aPreviousGroupLevel
-				);
-
-				COMPARE_LEVELS: {
-
-						# Equals?
-					if ($compareStatus == 0) {
-						# Yes, levels are equal;
-							# Format level
-						$$aToc .= $self->_formatLevelIndent(
-							ref($self->{_templateLevel}) eq "CODE" ?
-								&{$self->{_templateLevel}}(
-									$level, $groupId, $node, $sequenceNr, $text
-								) :
-								eval($self->{_templateLevel}),
-							0, $aGlobalLevel
-						);
-					}
-
-						# Greater?
-					if ($compareStatus > 0) {
-						# Yes, new level is greater than previous level;
-							# Must level be single-stepped?
-						if (
-							$self->{options}{'doSingleStepLevel'} && 
-							($aPreviousLevel) && 
-							($level > $aPreviousLevel)
-						) {
-							# Yes, level must be single-stepped;
-								# Make sure, new level is increased one step only
-							$level = $aPreviousLevel + 1;
-						}
-							# Increase global level
-						$aGlobalLevel++;
-							# Format begin of level
-						$$aToc .= $self->_formatLevelIndent(
-							eval($self->{_templateLevelBegin}), -1, $aGlobalLevel
-						);
-							# Process line again
-						unshift @$aHeaderLines, $line;
-							# Assemble TOC (recursive) for next level
-						$self->_formatToc(
-							$level, $groupLevel, $aToc, $aHeaderLines, $aGlobalLevel
-						);
-							# Format end of level
-						$$aToc .= $self->_formatLevelIndent(
-							eval($self->{_templateLevelEnd}), -1, $aGlobalLevel
-						);
-							# Decrease global level
-						$aGlobalLevel--;
-							# Exit loop
-						last COMPARE_LEVELS;
-					}
-
-						# Smaller?
-					if ($compareStatus < 0) {
-						# Yes, new level is smaller than previous level;
-							# Process line again
-						unshift @$aHeaderLines, $line;
-							# End loop
-						last LOOP;
-					}
-				}
-			}
-		}
-	}
-}	# _formatToc()
-
-
-#--- HTML::Toc::_parseTokenGroups() -------------------------------------------
-# function: Parse token groups
-
-sub _parseTokenGroups {
-		# Get arguments
-	my ($self) = @_;
-		# Local variables
-	my ($group, $levelGroups, $numberingStyle);
-
-		# Clear any previous 'levelGroups'
-	$self->{_levelGroups} = undef;
-		# Determine default 'numberingStyle'
-	$numberingStyle = defined($self->{options}{'numberingStyle'}) ?
-		$self->{options}{'numberingStyle'} : NUMBERING_STYLE_DECIMAL;
-
-		# Loop through groups
-	foreach $group (@{$self->{options}{'tokenToToc'}}) {
-			# 'groupId' is specified?
-		if (! defined($group->{'groupId'})) {
-			# No, 'groupId' isn't specified;
-				# Set default groupId
-			$group->{'groupId'} = GROUP_ID_H;
-		}
-			# 'level' is specified?
-		if (! defined($group->{'level'})) {
-			# No, 'level' isn't specified;
-				# Set default level
-			$group->{'level'} = LEVEL_1;
-		}
-			# 'numberingStyle' is specified?
-		if (! defined($group->{'numberingStyle'})) {
-			# No, 'numberingStyle' isn't specified;
-				# Set default numberingStyle
-			$group->{'numberingStyle'} = $numberingStyle;
-		}
-			# Add group to '_levelGroups' variabele
-		$self->{_levelGroups}{$group->{'groupId'}}[$group->{'level'} - 1] = 
-			$group;
-	}
-}  # _parseTokenGroups()
-
-
-#--- HTML::Toc::_setDefaults() ------------------------------------------------
-# function: Set default options.
-
-sub _setDefaults {
-		# Get arguments
-	my ($self) = @_;
-		# Set default options
-	$self->setOptions(
-		{
-			'attributeToExcludeToken' => '-',
-			'attributeToTocToken'     => '@',
-			'insertionPoint'          => 'after <body>',
-			'levelToToc'              => '.*',
-			'groupToToc'              => '.*',
-			'doNumberToken'           => 0,
-			'doLinkToFile'            => 0,
-			'doLinkToToken'           => 1,
-			'doLinkToId'              => 0,
-			'doSingleStepLevel'       => 1,
-			'linkUri'                 => '',
-			'levelIndent'             => 3,
-			'doNestGroup'             => 0,
-			'doUseExistingAnchors'    => 1,
-			'doUseExistingIds'        => 1,
-			'tokenToToc'              => [
-				{
-					'level'  => 1,
-					'tokenBegin' => '<h1>'
-				}, {
-					'level'  => 2,
-					'tokenBegin' => '<h2>'
-				}, {
-					'level'  => 3,
-					'tokenBegin' => '<h3>'
-				}, {
-					'level'  => 4,
-					'tokenBegin' => '<h4>'
-				}, {
-					'level'  => 5,
-					'tokenBegin' => '<h5>'
-				}, {
-					'level'  => 6,
-					'tokenBegin' => '<h6>'
-				}
-			],
-			'header'            =>
-				"\n<!-- Table of Contents generated by Perl - HTML::Toc -->\n",
-			'footer'            =>
-				"\n<!-- End of generated Table of Contents -->\n",
-		}
-	);
-}  # _setDefaults()
-
-
-#--- HTML::Toc::clear() -------------------------------------------------------
-# function: Clear ToC.
-
-sub clear {
-		# Get arguments
-	my ($self) = @_;
-		# Clear ToC
-	$self->{_toc}          = "";
-	$self->{toc}           = "";
-	$self->{groupIdLevels} = undef;
-	$self->{levels}        = undef;
-}   # clear()
-
-
-#--- HTML::Toc::format() ------------------------------------------------------
-# function: Format ToC.
-# returns:  Formatted ToC.
-
-sub format {
-		# Get arguments
-	my ($self) = @_;
-		# Local variables;
-	my $toc = "";
-	my @tocLines = split(/\r\n|\n/, $self->{_toc});
-		# Format table of contents
-	$self->_formatToc("0", "0", \$toc, \@tocLines, 0);
-		# Remove last newline
-	$toc =~ s/\n$//m;
-		# Add header & footer
-	$toc = $self->{options}{'header'} . $toc . $self->{options}{'footer'};
-		# Return value
-	return $toc;
-}	# format()
-
-
-#--- HTML::Toc::parseOptions() ------------------------------------------------
-# function: Parse options.
-
-sub parseOptions {
-		# Get arguments
-	my ($self) = @_;
-		# Alias options
-	my $options = $self->{options};
-
-		# Parse token groups
-	$self->_parseTokenGroups();
-
-		# Link ToC to tokens?
-	if ($self->{options}{'doLinkToToken'}) {
-		# Yes, link ToC to tokens;
-			# Determine anchor href template begin
-		$self->{_templateAnchorHrefBegin} =
-			defined($options->{'templateAnchorHrefBegin'}) ?
-				$options->{'templateAnchorHrefBegin'} :
-				$options->{'doLinkToFile'} ? 
-					TEMPLATE_ANCHOR_HREF_BEGIN_FILE : TEMPLATE_ANCHOR_HREF_BEGIN;
-
-			# Determine anchor href template end
-		$self->{_templateAnchorHrefEnd} =
-			defined($options->{'templateAnchorHrefEnd'}) ?
-				$options->{'templateAnchorHrefEnd'} :
-				TEMPLATE_ANCHOR_HREF_END;
-
-			# Determine anchor name template
-		$self->{_templateAnchorName} =
-			defined($options->{'templateAnchorName'}) ?
-				$options->{'templateAnchorName'} :
-				TEMPLATE_ANCHOR_NAME;
-
-			# Determine anchor name template begin
-		$self->{_templateAnchorNameBegin} =
-			defined($options->{'templateAnchorNameBegin'}) ?
-				$options->{'templateAnchorNameBegin'} :
-				TEMPLATE_ANCHOR_NAME_BEGIN;
-
-			# Determine anchor name template end
-		$self->{_templateAnchorNameEnd} =
-			defined($options->{'templateAnchorNameEnd'}) ?
-				$options->{'templateAnchorNameEnd'} :
-				TEMPLATE_ANCHOR_NAME_END;
-	}
-
-		# Determine token number template
-	$self->{_templateTokenNumber} = 
-		defined($options->{'templateTokenNumber'}) ?
-			$options->{'templateTokenNumber'} :
-			TEMPLATE_TOKEN_NUMBER;
-
-		# Determine level template
-	$self->{_templateLevel} =
-		defined($options->{'templateLevel'}) ?
-			$options->{'templateLevel'} :
-			TEMPLATE_LEVEL;
-
-		# Determine level begin template
-	$self->{_templateLevelBegin} =
-		defined($options->{'templateLevelBegin'}) ?
-			$options->{'templateLevelBegin'} :
-			TEMPLATE_LEVEL_BEGIN;
-
-		# Determine level end template
-	$self->{_templateLevelEnd} =
-		defined($options->{'templateLevelEnd'}) ?
-			$options->{'templateLevelEnd'} :
-			TEMPLATE_LEVEL_END;
-
-		# Determine 'anchor name begin' begin update token
-	$self->{_tokenUpdateBeginOfAnchorNameBegin} =
-		defined($options->{'tokenUpdateBeginOfAnchorNameBegin'}) ?
-			$options->{'tokenUpdateBeginOfAnchorNameBegin'} :
-			TOKEN_UPDATE_BEGIN_OF_ANCHOR_NAME_BEGIN;
-
-		# Determine 'anchor name begin' end update token
-	$self->{_tokenUpdateEndOfAnchorNameBegin} =
-		defined($options->{'tokenUpdateEndOfAnchorNameBegin'}) ?
-			$options->{'tokenUpdateEndOfAnchorNameBegin'} :
-			TOKEN_UPDATE_END_OF_ANCHOR_NAME_BEGIN;
-
-		# Determine 'anchor name end' begin update token
-	$self->{_tokenUpdateBeginOfAnchorNameEnd} =
-		defined($options->{'tokenUpdateBeginOfAnchorNameEnd'}) ?
-			$options->{'tokenUpdateBeginOfAnchorNameEnd'} :
-			TOKEN_UPDATE_BEGIN_OF_ANCHOR_NAME_END;
-
-		# Determine 'anchor name end' end update token
-	$self->{_tokenUpdateEndOfAnchorNameEnd} =
-		defined($options->{'tokenUpdateEndOfAnchorNameEnd'}) ?
-			$options->{'tokenUpdateEndOfAnchorNameEnd'} :
-			TOKEN_UPDATE_END_OF_ANCHOR_NAME_END;
-
-		# Determine number begin update token
-	$self->{_tokenUpdateBeginNumber} =
-		defined($options->{'tokenUpdateBeginNumber'}) ?
-			$options->{'tokenUpdateBeginNumber'} :
-			TOKEN_UPDATE_BEGIN_NUMBER;
-
-		# Determine number end update token
-	$self->{_tokenUpdateEndNumber} =
-		defined($options->{'tokenUpdateEndNumber'}) ?
-			$options->{'tokenUpdateEndNumber'} :
-			TOKEN_UPDATE_END_NUMBER;
-
-		# Determine toc begin update token
-	$self->{_tokenUpdateBeginToc} =
-		defined($options->{'tokenUpdateBeginToc'}) ?
-			$options->{'tokenUpdateBeginToc'} :
-			TOKEN_UPDATE_BEGIN_TOC;
-
-		# Determine toc end update token
-	$self->{_tokenUpdateEndToc} =
-		defined($options->{'tokenUpdateEndToc'}) ?
-			$options->{'tokenUpdateEndToc'} :
-			TOKEN_UPDATE_END_TOC;
-
-}  # parseOptions()
-
-
-#--- HTML::Toc::setOptions() --------------------------------------------------
-# function: Set options.
-# args:     - aOptions: Reference to hash containing options.
-
-sub setOptions {
-		# Get arguments
-	my ($self, $aOptions) = @_;
-		# Add options
-	%{$self->{options}} = (%{$self->{options}}, %$aOptions);
-}  # setOptions()
-
-
-1;

examples/includes/HTML-Toc-0.91/TocUpdator.pm

@@ -1,693 +0,0 @@
-#==== HTML::TocUpdator ========================================================
-# function: Update 'HTML::Toc' table of contents.
-# note:     - 'TUT' is an abbreviation of 'Toc Update Token'.
-
-
-package HTML::TocUpdator;
-
-
-use strict;
-use HTML::TocInsertor;
-
-
-BEGIN {
-	use vars qw(@ISA $VERSION);
-
-	$VERSION = '0.91';
-
-	@ISA = qw(HTML::TocInsertor);
-}
-
-
-use constant TUT_TOKENTYPE_START    => 0;
-use constant TUT_TOKENTYPE_END      => 1;
-use constant TUT_TOKENTYPE_TEXT     => 2;
-use constant TUT_TOKENTYPE_COMMENT  => 3;
-
-use constant MODE_DO_NOTHING   => 0;	# 0b00
-use constant MODE_DO_INSERT    => 1;	# 0b01
-use constant MODE_DO_UPDATE    => 3;	# 0b11
-
-
-END {}
-
-
-#--- HTML::TocUpdator::new() --------------------------------------------------
-# function: Constructor.
-
-sub new {
-		# Get arguments
-	my ($aType) = @_;
-	my $self = $aType->SUPER::new;
-		# Bias to not update ToC
-	$self->{htu__Mode} = MODE_DO_NOTHING;
-		# Bias to not delete tokens
-	$self->{_doDeleteTokens} = 0;
-		# Reset batch variables
-	#$self->_resetBatchVariables;
-
-	$self->{options} = {};
-		
-		# TODO: Initialize output
-
-	return $self;
-}  # new()
-
-
-#--- HTML::TocUpdator::_deinitializeUpdatorBatch() --------------------------
-# function: Deinitialize updator batch.
-# args:     - $aTocs: Reference to array of tocs.
-
-sub _deinitializeUpdatorBatch {
-		# Get arguments
-	my ($self, $aTocs) = @_;
-		# Indicate end of ToC updating
-	$self->{htu__Mode} = MODE_DO_NOTHING;
-		# Deinitialize insertor batch
-	$self->_deinitializeInsertorBatch();
-}  # _deinitializeUpdatorBatch()
-
-
-#--- HTML::TokenUpdator::_doesHashEqualHash() ---------------------------------
-# function: Determines whether hash1 equals hash2.
-# args:     - $aHash1
-#           - $aHash2
-# returns:  True (1) if hash1 equals hash2, 0 if not.  For example, with the
-#           following hashes:
-#
-#              %hash1 = {                     %hash2 = {
-#                 'class' => 'header',          'class' => 'header',
-#                 'id'    => 'intro1'           'id'    => 'intro2'
-#              }                             }
-#
-#           the routine will return 0, cause the hash fields 'id' differ.
-# note:     Class function.
-
-sub _doesHashEqualHash {
-		# Get arguments
-	my ($aHash1, $aHash2) = @_;
-		# Local variables
-	my ($key1, $value1, $key2, $value2, $result);
-		# Bias to success
-	$result = 1;
-		# Loop through hash1 while values available
-	HASH1: while (($key1, $value1) = each %$aHash1) {
-		# Yes, values are available;
-			# Value1 differs from value2?
-		if ($value1 ne $aHash2->{$key1}) {
-			# Yes, hashes differ;
-				# Indicate condition fails
-			$result = 0;
-				# Reset 'each' iterator which we're going to break
-			keys %$aHash2;
-				# Break loop
-			last HASH1;
-		}
-	}
-		# Return value
-	return $result;
-}  # _doesHashEqualHash()
-
-
-#--- HTML::TokenUpdator::_doesTagExistInArray() -------------------------------
-# function: Check whether tag & attributes matches any of the tags & attributes
-#           in the specified array.  The array must consist of elements with 
-#           format:
-#
-#              [$tag, \%attributes]
-#
-# args:     - $aTag: tag to search for
-#           - $aAttributes: tag attributes to search for
-#           - $aArray: Array to search in.
-# returns:  1 if tag does exist in array, 0 if not.
-# note:     Class function.
-
-sub _doesTagExistInArray {
-		# Get arguments
-	my ($aTag, $aAttributes, $aArray) = @_;
-		# Local variables
-	my ($tag, $result);
-		# Bias to non-existing tag
-	$result = 0;
-		# Loop through existing tags
-	TAG: foreach $tag (@{$aArray}) {
-		if (defined(@{$tag}[0])) {
-				# Does tag equals any existing tag?
-			if ($aTag eq @{$tag}[0]) {
-				# Yes, tag equals existing tag;
-					# Do hashes equal?
-				if (HTML::TocUpdator::_doesHashEqualHash(
-					$aAttributes, @{$tag}[1]
-				)) {
-					# Yes, hashes are the same;
-						# Indicate tag exists in array
-					$result = 1;
-						# Break loop
-					last TAG;
-				}
-			}
-		}
-	}
-		# Return value
-	return $result;
-}  # _doesTagExistInArray()
-
-
-#--- HTML::TocUpdator::_initializeUpdatorBatch() ----------------------------
-# function: Initialize insertor batch.
-# args:     - $aMode: Mode.  Can be either MODE_DO_INSERT or MODE_DO_UPDATE
-#           - $aTocs: Reference to array of tocs.
-#           - $aOptions: optional options
-# note:     Updating actually means: deleting the old ToC and inserting a new
-#           ToC.  That's why we're calling 'insertor' methods here.
-
-sub _initializeUpdatorBatch {
-		# Get arguments
-	my ($self, $aMode, $aTocs, $aOptions) = @_;
-		# Initialize insertor batch
-	$self->_initializeInsertorBatch($aTocs, $aOptions);
-		# Parse ToC update templates
-	$self->_parseTocUpdateTokens();
-		# Indicate start of ToC updating
-	$self->{htu__Mode} = $aMode;
-}  # _initializeUpdatorBatch()
-
-
-#--- HTML::TocUpdator::_parseTocUpdateTokens() --------------------------------
-# function: Parse ToC insertion point specifier.
-
-sub _parseTocUpdateTokens {
-		# Get arguments
-	my ($self) = @_;
-		# Local variables
-	my ($toc, $tokenType, $tokenPreposition, $token);
-	my ($tocInsertionPoint, $tocInsertionPointTokenAttributes);
-		# Create parser for update begin tokens
-	my $tokenUpdateBeginParser = HTML::_TokenUpdateParser->new(
-		$self->{_tokensUpdateBegin}
-	);
-		# Create parser for update end tokens
-	my $tokenUpdateEndParser = HTML::_TokenUpdateParser->new(
-		$self->{_tokensUpdateEnd}
-	);
-
-		# Loop through ToCs
-	foreach $toc (@{$self->{_tocs}}) {
-			# Parse update tokens
-		$tokenUpdateBeginParser->parse(
-			$toc->{_tokenUpdateBeginOfAnchorNameBegin}
-		);
-		$tokenUpdateBeginParser->parse($toc->{_tokenUpdateBeginOfAnchorNameEnd});
-		$tokenUpdateBeginParser->parse($toc->{_tokenUpdateBeginNumber});
-		$tokenUpdateBeginParser->parse($toc->{_tokenUpdateBeginToc});
-
-		$tokenUpdateEndParser->parse($toc->{_tokenUpdateEndOfAnchorNameBegin});
-		$tokenUpdateEndParser->parse($toc->{_tokenUpdateEndOfAnchorNameEnd});
-		$tokenUpdateEndParser->parse($toc->{_tokenUpdateEndNumber});
-		$tokenUpdateEndParser->parse($toc->{_tokenUpdateEndToc});
-	}
-}  # _parseTocUpdateTokens()
-
-
-#--- HTML::TocUpdator::_resetBatchVariables() ---------------------------------
-# function: Reset batch variables
-
-sub _resetBatchVariables {
-		# Get arguments
-	my ($self) = @_;
-		# Call ancestor
-	$self->SUPER::_resetBatchVariables();
-		# Arrays containing start, end, comment & text tokens which indicate
-		# the begin of ToC tokens.  The tokens are stored in keys of hashes to 
-		# avoid storing duplicates as an array would.
-	$self->{_tokensUpdateBegin} = [
-		[],	# ['<start tag>', <attributes>]
-		{},	# {'<end tag>' => ''}
-		{},	# {'<text>'    => ''}
-		{}		# {'<comment>' => ''}
-	];
-		# Arrays containing start, end, comment & text tokens which indicate
-		# the end of ToC tokens.  The tokens are stored in keys of hashes to 
-		# avoid storing duplicates as an array would.
-	$self->{_tokensUpdateEnd} = [
-		[],	# ['<start tag>', <attributes>]
-		{},	# {'<end tag>' => ''}
-		{},	# {'<text>'    => ''}
-		{}		# {'<comment>' => ''}
-	];
-}  # _resetBatchVariables()
-
-
-#--- HTML::TocUpdator::_setActiveAnchorName() ---------------------------------
-# function: Set active anchor name.
-# args:     - aAnchorName: Name of anchor name to set active.
-
-sub _setActiveAnchorName {
-		# Get arguments
-	my ($self, $aAnchorName) = @_;
-		# Are tokens being deleted?
-	if (! $self->{_doDeleteTokens}) {
-		# No, tokens aren't being deleted;
-			# Call ancestor to set anchor name
-		$self->SUPER::_setActiveAnchorName($aAnchorName);
-	}
-}  # _setActiveAnchorName()
-
-
-#--- HTML::TocUpdator::_update() ----------------------------------------------
-# function: Update ToC in string.
-# args:     - $aMode: Mode.  Can be either MODE_DO_UPDATE or MODE_DO_INSERT.
-#           - $aToc: (reference to array of) ToC object to update
-#           - $aString: string to update ToC of
-#           - $aOptions: optional updator options
-# note:     Used internally.
-
-sub _update {
-		# Get arguments
-	my ($self, $aMode, $aToc, $aString, $aOptions) = @_;
-		# Initialize TocUpdator batch
-	$self->_initializeUpdatorBatch($aMode, $aToc, $aOptions);
-		# Start updating ToC by starting ToC insertion
-	$self->_insert($aString);
-		# Deinitialize TocUpdator batch
-	$self->_deinitializeUpdatorBatch();
-}  # update()
-
-
-#--- HTML::TocUpdator::_updateFile() ------------------------------------------
-# function: Update ToCs in file.
-# args:     - $aMode: Mode.  Can be either MODE_DO_UPDATE or MODE_DO_INSERT.
-#           - $aToc: (reference to array of) ToC object to update
-#           - $aFile: (reference to array of) file to parse for updating.
-#           - $aOptions: optional updator options
-# note:     Used internally.
-
-sub _updateFile {
-		# Get arguments
-	my ($self, $aMode, $aToc, $aFile, $aOptions) = @_;
-		# Initialize TocUpdator batch
-	$self->_initializeUpdatorBatch($aMode, $aToc, $aOptions);
-		# Start updating ToC by starting ToC insertion
-	$self->_insertIntoFile($aFile);
-		# Deinitialize TocUpdator batch
-	$self->_deinitializeUpdatorBatch();
-}  # _updateFile()
-
-
-#--- HTML::TocUpdator::_writeOrBufferOutput() ---------------------------------
-# function: Write processed HTML to output device(s).
-# args:     - aOutput: scalar to write
-
-sub _writeOrBufferOutput {
-		# Get arguments
-	my ($self, $aOutput) = @_;
-		# Delete output?
-	if (! $self->{_doDeleteTokens}) {
-		# No, don't delete output;
-			# Call ancestor
-		$self->SUPER::_writeOrBufferOutput($aOutput);
-	}
-}  # _writeOrBufferOutput()
-
-
-#--- HTML::TocUpdator::anchorNameBegin() --------------------------------------
-# function: Process 'anchor name begin' generated by HTML::Toc.
-# args:     - $aAnchorName: Anchor name begin tag to output.
-#           - $aToc: Reference to ToC to which anchorname belongs.
-
-sub anchorNameBegin {
-		# Get arguments
-	my ($self, $aAnchorNameBegin, $aToc) = @_;
-		# Call ancestor
-	$self->SUPER::anchorNameBegin($aAnchorNameBegin);
-		# Must ToC be inserted or updated?
-	if ($self->{htu__Mode} != MODE_DO_NOTHING) {
-		# Yes, ToC must be inserted or updated;
-			# Surround anchor name with update tags
-		$self->{_outputPrefix} = 
-			$aToc->{_tokenUpdateBeginOfAnchorNameBegin} .
-			$self->{_outputPrefix} . 
-			$aToc->{_tokenUpdateEndOfAnchorNameBegin};
-	}
-}	# anchorNameBegin()
-
-
-#--- HTML::TocUpdator::anchorNameEnd() ----------------------------------------
-# function: Process 'anchor name end' generated by HTML::Toc.
-# args:     - $aAnchorNameEnd: Anchor name end tag to output.
-#           - $aToc: Reference to ToC to which anchorname belongs.
-
-sub anchorNameEnd {
-		# Get arguments
-	my ($self, $aAnchorNameEnd, $aToc) = @_;
-		# Call ancestor
-	$self->SUPER::anchorNameEnd($aAnchorNameEnd);
-		# Must ToC be inserted or updated?
-	if ($self->{htu__Mode} != MODE_DO_NOTHING) {
-		# Yes, ToC must be inserted or updated;
-			# Surround anchor name with update tags
-		$self->{_outputSuffix} = 
-			$aToc->{_tokenUpdateBeginOfAnchorNameEnd} .
-			$self->{_outputSuffix} . 
-			$aToc->{_tokenUpdateEndOfAnchorNameEnd};
-	}
-}	# anchorNameEnd()
-
-
-#--- HTML::TocUpdator::comment() ----------------------------------------------
-# function: Process comment.
-# args:     - $aComment: comment text with '<!--' and '-->' tags stripped off.
-
-sub comment {
-		# Get arguments
-	my ($self, $aComment) = @_;
-		# Must ToC be updated?
-	if ($self->{htu__Mode} == MODE_DO_UPDATE) {
-		# Yes, ToC must be updated;
-			# Updator is currently deleting tokens?
-		if ($self->{_doDeleteTokens}) {
-			# Yes, tokens must be deleted;
-				# Call ancestor
-			$self->SUPER::comment($aComment);
-
-				# Look for update end token
-
-				# Does comment matches update end token?
-			if (defined(
-				$self->{_tokensUpdateEnd}[TUT_TOKENTYPE_COMMENT]{$aComment}
-			)) {
-				# Yes, comment matches update end token;
-					# Indicate to stop deleting tokens
-				$self->{_doDeleteTokens} = 0;
-			}
-		}
-		else {
-			# No, tokens mustn't be deleted;
-
-				# Look for update begin token
-
-				# Does comment matches update begin token?
-			if (defined(
-				$self->{_tokensUpdateBegin}[TUT_TOKENTYPE_COMMENT]{$aComment}
-			)) {
-				# Yes, comment matches update begin token;
-					# Indicate to start deleting tokens
-				$self->{_doDeleteTokens} = 1;
-			}
-				# Call ancestor
-			$self->SUPER::comment($aComment);
-		}
-	}
-	else {
-		# No, ToC mustn't be updated;
-			# Call ancestor
-		$self->SUPER::comment($aComment);
-	}
-}  # comment()
-
-
-#--- HTML::TocUpdator::end() --------------------------------------------------
-# function: This function is called every time a closing tag is encountered.
-# args:     - $aTag: tag name (in lower case).
-#           - $aOrigText: tag name including brackets.
-
-sub end {
-		# Get arguments
-	my ($self, $aTag, $aOrigText) = @_;
-		# Call ancestor
-	$self->SUPER::end($aTag, $aOrigText);
-		# Must ToC be updated?
-	if ($self->{htu__Mode} == MODE_DO_UPDATE) {
-		# Yes, ToC must be updated;
-			# Updator is currently deleting tokens?
-		if ($self->{_doDeleteTokens}) {
-			# Yes, tokens must be deleted;
-				# Does end tag matches update end token?
-			if (defined(
-				$self->{_tokensUpdateEnd}[TUT_TOKENTYPE_END]{$aTag}
-			)) {
-				# Yes, end tag matches update end token;
-					# Indicate to stop deleting tokens
-				$self->{_doDeleteTokens} = 0;
-			}
-		}
-	}
-}  # end()
-
-
-#--- HTML::TocUpdator::insert() -----------------------------------------------
-# function: Insert ToC in string.
-# args:     - $aToc: (reference to array of) ToC object to update
-#           - $aString: string to insert ToC in.
-#           - $aOptions: optional updator options
-
-sub insert {
-		# Get arguments
-	my ($self, $aToc, $aString, $aOptions) = @_;
-		# Do start insert
-	$self->_update(MODE_DO_INSERT, $aToc, $aString, $aOptions);
-}  # insert()
-
-
-#--- HTML::TocUpdator::insertIntoFile() --------------------------------------
-# function: Insert ToC in file.
-# args:     - $aToc: (reference to array of) ToC object to update
-#           - $aFile: File to insert ToC in.
-#           - $aOptions: optional updator options
-
-sub insertIntoFile {
-		# Get arguments
-	my ($self, $aToc, $aFile, $aOptions) = @_;
-		# Do start insert
-	$self->_updateFile(MODE_DO_INSERT, $aToc, $aFile, $aOptions);
-}  # insertIntoFile()
-
-
-#--- HTML::TocUpdator::number() -----------------------------------------------
-# function: Process heading number generated by HTML::Toc.
-# args:     - $aNumber
-#           - $aToc: Reference to ToC to which anchorname belongs.
-
-sub number {
-		# Get arguments
-	my ($self, $aNumber, $aToc) = @_;
-		# Call ancestor
-	$self->SUPER::number($aNumber);
-		# Must ToC be inserted or updated?
-	if ($self->{htu__Mode} != MODE_DO_NOTHING) {
-		# Yes, ToC must be inserted or updated;
-			# Surround number with update tags
-		$self->{_outputSuffix} = 
-			$aToc->{_tokenUpdateBeginNumber} .
-			$self->{_outputSuffix} . 
-			$aToc->{_tokenUpdateEndNumber};
-	}
-}	# number()
-
-
-#--- HTML::TocUpdator::start() ------------------------------------------------
-# function: This function is called every time an opening tag is encountered.
-# args:     - $aTag: tag name (in lower case).
-#           - $aAttr: reference to hash containing all tag attributes (in lower
-#                case).
-#           - $aAttrSeq: reference to array containing all tag attributes (in 
-#                lower case) in the original order
-#           - $aOrigText: the original HTML text
-
-sub start {
-		# Get arguments
-	my ($self, $aTag, $aAttr, $aAttrSeq, $aOrigText) = @_;
-		# Must ToC be updated?
-	if ($self->{htu__Mode} == MODE_DO_UPDATE) {
-		# Yes, ToC must be updated;
-			# Does start tag matches token update begin tag?
-		if (HTML::TocUpdator::_doesTagExistInArray(
-			$aTag, $aAttr, $self->{_tokensUpdateBegin}[TUT_TOKENTYPE_START]
-		)) {
-			# Yes, start tag matches token update tag;
-				# Indicate to delete tokens
-			$self->{_doDeleteTokens} = 1;
-		}
-	}
-		# Let ancestor process the start tag
-	$self->SUPER::start($aTag, $aAttr, $aAttrSeq, $aOrigText);
-}  # start()
-
-
-#--- HTML::TocUpdator::toc() --------------------------------------------------
-# function: Toc processing method.  Add toc reference to scenario.
-# args:     - $aScenario: Scenario to add ToC reference to.
-#           - $aToc: Reference to ToC to insert.
-# note:     The ToC hasn't been build yet; only a reference to the ToC to be
-#           build is inserted.
-
-sub toc {
-		# Get arguments
-	my ($self, $aScenario, $aToc) = @_;
-
-		# Surround toc with update tokens
-
-		# Add update begin token
-	push(@$aScenario, \$aToc->{_tokenUpdateBeginToc});
-		# Call ancestor
-	$self->SUPER::toc($aScenario, $aToc);
-		# Add update end token
-	push(@$aScenario, \$aToc->{_tokenUpdateEndToc});
-}  # toc()
-
-
-#--- HTML::TocUpdator::_processTocText() --------------------------------------
-# function: Toc text processing function.
-# args:     - $aText: Text to add to ToC.
-#           - $aToc: ToC to add text to.
-
-sub _processTocText {
-		# Get arguments
-	my ($self, $aText, $aToc) = @_;
-		# Delete output?
-	if (! $self->{_doDeleteTokens}) {
-		# No, don't delete output;
-			# Call ancestor
-		$self->SUPER::_processTocText($aText, $aToc);
-	}
-}  # _processTocText()
-
-
-#--- HTML::TocUpdator::update() -----------------------------------------------
-# function: Update ToC in string.
-# args:     - $aToc: (reference to array of) ToC object to update
-#           - $aString: string to update ToC of
-#           - $aOptions: optional updator options
-
-sub update {
-		# Get arguments
-	my ($self, $aToc, $aString, $aOptions) = @_;
-		# Do start update
-	$self->_update(MODE_DO_UPDATE, $aToc, $aString, $aOptions);
-}  # update()
-
-
-#--- HTML::TocUpdator::updateFile() -------------------------------------------
-# function: Update ToC of file.
-# args:     - $aToc: (reference to array of) ToC object to update
-#           - $aFile: (reference to array of) file to parse for updating.
-#           - $aOptions: optional updator options
-
-sub updateFile {
-		# Get arguments
-	my ($self, $aToc, $aFile, $aOptions) = @_;
-		# Do start update
-	$self->_updateFile(MODE_DO_UPDATE, $aToc, $aFile, $aOptions);
-}  # update()
-
-
-
-
-#=== HTML::_TokenUpdateParser =================================================
-# function: Parse 'update tokens'.  'Update tokens' mark HTML code which is
-#           inserted by 'HTML::TocInsertor'.
-# note:     Used internally.
-
-package HTML::_TokenUpdateParser;
-
-
-BEGIN {
-	use vars qw(@ISA);
-
-	@ISA = qw(HTML::Parser);
-}
-
-END {}
-
-
-#--- HTML::_TokenUpdateParser::new() ------------------------------------------
-# function: Constructor
-
-sub new {
-		# Get arguments
-	my ($aType, $aTokenArray) = @_;
-		# Create instance
-	my $self = $aType->SUPER::new;
-		# Reference token array
-	$self->{tokens} = $aTokenArray;
-		# Return instance
-	return $self;
-}  # new()
-
-
-#--- HTML::_TokenUpdateParser::comment() --------------------------------------
-# function: Process comment.
-# args:     - $aComment: comment text with '<!--' and '-->' tags stripped off.
-
-sub comment {
-		# Get arguments
-	my ($self, $aComment) = @_;
-		# Add token to array of update tokens
-	$self->{tokens}[HTML::TocUpdator::TUT_TOKENTYPE_COMMENT]{$aComment} = '';
-}  # comment()
-
-
-#--- HTML::_TokenUpdateParser::end() ------------------------------------------
-# function: This function is called every time a closing tag is encountered
-#           by HTML::Parser.
-# args:     - $aTag: tag name (in lower case).
-
-sub end {
-		# Get arguments
-	my ($self, $aTag, $aOrigText) = @_;
-		# Add token to array of update tokens
-	$self->{tokens}[HTML::TocUpdator::TUT_TOKENTYPE_END]{$aTag} = '';
-}  # end()
-
-
-#--- HTML::_TokenUpdateParser::parse() ----------------------------------------
-# function: Parse token.
-# args:     - $aToken: 'update token' to parse
-
-sub parse {
-		# Get arguments
-	my ($self, $aString) = @_;
-		# Call ancestor
-	$self->SUPER::parse($aString);
-}  # parse()
-
-
-#--- HTML::_TokenUpdateParser::start() ----------------------------------------
-# function: This function is called every time an opening tag is encountered.
-# args:     - $aTag: tag name (in lower case).
-#           - $aAttr: reference to hash containing all tag attributes (in lower
-#                case).
-#           - $aAttrSeq: reference to array containing all tag attributes (in 
-#                lower case) in the original order
-#           - $aOrigText: the original HTML text
-
-sub start {
-		# Get arguments
-	my ($self, $aTag, $aAttr, $aAttrSeq, $aOrigText) = @_;
-		# Does token exist in array?
-	if (! HTML::TocUpdator::_doesTagExistInArray(
-		$aTag, $aAttr, $self->{tokens}[HTML::TocUpdator::TUT_TOKENTYPE_START]
-	)) {
-		# No, token doesn't exist in array;
-			# Add token to array of update tokens
-		push(
-			@{$self->{tokens}[HTML::TocUpdator::TUT_TOKENTYPE_START]},
-			[$aTag, $aAttr]
-		);
-	}
-}  # start()
-
-
-#--- HTML::_TokenUpdateParser::text() -----------------------------------------
-# function: This function is called every time plain text is encountered.
-# args:     - @_: array containing data.
-
-sub text {
-		# Get arguments
-	my ($self, $aText) = @_;
-		# Add token to array of update tokens
-	$self->{tokens}[HTML::TocUpdator::TUT_TOKENTYPE_TEXT]{$aText} = '';
-}  # text()
-
-
-1;

examples/includes/HTML-Toc-0.91/t/ManualTest/manualTest1.htm

@@ -1,92 +0,0 @@
-<html>
-<head>
-   <title>Manual</title>
-    <style type="text/css">
-       ul.toc_appendix1 { 
-         list-style-type: none;
-         margin-left: 0;
-         margin-top: 1em;
-         margin-bottom: 1em;
-       }
-       ul.toc_h1 {
-         list-style-type: none;
-         margin-left: 1;
-         margin-top: 1em;
-         margin-bottom: 1em;
-       }
-       ul.toc_h2 {
-         list-style-type: none;
-       }
-       ul.toc_h3 {
-         list-style-type: none;
-       }
-       ul.toc_part1 {
-         list-style-type: none;
-         margin-left: 1;
-         margin-top: 1em;
-         margin-bottom: 1em;
-       }
-       ul.toc_prelude1 {
-         list-style: none;
-       }
-       p.captionFigure {
-         font-style: italic;
-         font-weight: bold;
-       }
-       p.captionTable {
-         font-style: italic;
-         font-weight: bold;
-       }
-    </style>
-</head>
-<body>
-
-<h1 class=prelude>Preface</h1>
-Better C than never.
-
-<h1 class=hidden>Table of Contents</h1>
-<!-- Table of Contents -->
-
-<h1 class=prelude>Table of Figures</h1>
-<!-- Table of Figures -->
-
-<h1 class=prelude>Table of Tables</h1>
-<!-- Table of Tables -->
-
-<h1 class=prelude>Introduction</h1>
-Thanks to standardisation and the excellent work of the QWERTY corporation it is possible to learn C with almost any C manual.
-<p class=captionTable>Compile Steps</p>
-<ul><pre>
-   Parser
-   Compiler
-   Linker
-</pre></ul>
-
-<h1 class=part>Disks</h1>
-<h1>Compiler Disk v1</h1>
-<img src=img.gif alt="Contents Compiler Disk v1">
-<p class=captionFigure>Contents Compiler Disk v1</p>
-
-<h2>System</h2>
-<h2>Standard Library</h2>
-
-<h1>Compiler Disk v2</h1>
-<img src=img.gif alt="Contents Compiler Disk v2">
-<p class=captionFigure>Contents Compiler Disk v2</p>
-
-<h2>System</h2>
-<h3>parser.com</h3>
-<h3>compiler.com</h3>
-<h3>linker.com</h3>
-<h2>Standard Library</h2>
-
-<h1>Library System Disk</h1>
-<h1 class=part>Personal</h1>
-<h1>Tips & Tricks</h1>
-<h1 class=part>Appendixes</h1>
-<h1 class=appendix>Functions Standard Library v1</h1>
-<h1 class=appendix>Functions Standard Library v2</h1>
-<h1 class=appendix>Functions Graphic Library</h1>
-<h1 class=prelude>Bibliography</h1>
-</body>
-</html>

examples/includes/HTML-Toc-0.91/t/SiteMap/SubDir1/SubSubDir1/index.htm

@@ -1,5 +0,0 @@
-<html>
-<head>
-<title>SubSub1</title>
-</head>
-</html>

examples/includes/HTML-Toc-0.91/t/SiteMap/SubDir1/index.htm

@@ -1,5 +0,0 @@
-<html>
-<head>
-<title>Sub1</title>
-</head>
-</html>

examples/includes/HTML-Toc-0.91/t/SiteMap/SubDir2/SubSubDir1/index.htm

@@ -1,5 +0,0 @@
-<html>
-<head>
-<title>SubSub1</title>
-</head>
-</html>

examples/includes/HTML-Toc-0.91/t/SiteMap/SubDir2/SubSubDir2/index.htm

@@ -1,5 +0,0 @@
-<html>
-<head>
-<title>SubSub2</title>
-</head>
-</html>

examples/includes/HTML-Toc-0.91/t/SiteMap/SubDir2/index.htm

@@ -1,5 +0,0 @@
-<html>
-<head>
-<title>Sub2</title>
-</head>
-</html>

examples/includes/HTML-Toc-0.91/t/SiteMap/SubDir3/index.htm

@@ -1,5 +0,0 @@
-<html>
-<head>
-<title>Sub3</title>
-</head>
-</html>

examples/includes/HTML-Toc-0.91/t/SiteMap/index.htm

@@ -1,5 +0,0 @@
-<html>
-<head>
-<title>Main</title>
-</head>
-</html>

examples/includes/HTML-Toc-0.91/t/extend.t

@@ -1,87 +0,0 @@
-#--- generate.t ---------------------------------------------------------------
-# function: Test ToC generation.
-
-use strict;
-use Test;
-
-BEGIN { plan tests => 4; }
-
-use HTML::Toc;
-use HTML::TocGenerator;
-
-my ($filename);
-my $toc          = HTML::Toc->new;
-my $tocGenerator = HTML::TocGenerator->new;
-
-$toc->setOptions({
-	'doLinkToToken' => 0,
-	'levelIndent'       => 0,
-	'header'            => '',
-	'footer'            => '',
-});
-
-
-BEGIN {
-		# Create test file
-	$filename = "file$$.htm";
-	die "$filename is already there" if -e $filename;
-	open(FILE, ">$filename") || die "Can't create $filename: $!";
-	print FILE <<'EOT';
-<h1>Header</h1>
-EOT
-	close(FILE);
-}
-
-
-END {
-		# Remove test file
-	unlink($filename) or warn "Can't unlink $filename: $!";
-}
-
-
-#--- 1. extend ----------------------------------------------------------------
-
-	# Generate ToC
-$tocGenerator->generate($toc, "<h1>Header</h1>");
-	# Extend ToC
-$tocGenerator->extend($toc, "<h1>Header</h1>");
-	# Test ToC
-ok($toc->format(), "<ul>\n<li>Header\n<li>Header\n</ul>");
-
-
-#--- 2. extendFromFile --------------------------------------------------------
-
-	# Generate ToC
-$tocGenerator->generateFromFile($toc, $filename);
-	# Extend ToC
-$tocGenerator->extendFromFile($toc, $filename);
-	# Test ToC
-ok($toc->format(), "<ul>\n<li>Header\n<li>Header\n</ul>");
-
-
-#--- 3. extendFromFiles -------------------------------------------------------
-
-	# Generate ToC
-$tocGenerator->generateFromFile($toc, $filename);
-	# Extend ToC
-$tocGenerator->extendFromFile($toc, [$filename, $filename]);
-	# Test ToC
-ok($toc->format(), "<ul>\n<li>Header\n<li>Header\n<li>Header\n</ul>");
-
-
-#--- 4. linkTocToToken --------------------------------------------------------
-
-$toc->setOptions({
-	'doLinkToToken' => 1,
-});
-	# Generate ToC
-$tocGenerator->generate($toc, "<h1>Header</h1>");
-	# Extend ToC
-$tocGenerator->extend($toc, "<h1>Header</h1>");
-	# Test ToC
-ok($toc->format() . "\n", <<'EOT');
-<ul>
-<li><a href=#h-1>Header</a>
-<li><a href=#h-2>Header</a>
-</ul>
-EOT

examples/includes/HTML-Toc-0.91/t/format.t

@@ -1,157 +0,0 @@
-#--- format.t -----------------------------------------------------------------
-# function: Test ToC formatting.
-
-use strict;
-use Test;
-
-BEGIN { plan tests => 6; }
-
-use HTML::Toc;
-use HTML::TocGenerator;
-use HTML::TocInsertor;
-
-my ($output, $content, $filename);
-my $toc          = HTML::Toc->new;
-my $tocGenerator = HTML::TocGenerator->new;
-my $tocInsertor  = HTML::TocInsertor->new;
-
-$toc->setOptions({
-	'doLinkToToken'  => 0,
-	'levelIndent'       => 0,
-	'insertionPoint'    => 'before <h1>',
-	'header'            => '',
-	'footer'            => '',
-});
-
-
-BEGIN {
-		# Create test file
-	$filename = "file$$.htm";
-	die "$filename is already there" if -e $filename;
-	open(FILE, ">$filename") || die "Can't create $filename: $!";
-	print FILE <<'EOT'; close(FILE);
-<h1>Header</h1>
-EOT
-}
-
-
-END {
-		# Remove test file
-	unlink($filename) or warn "Can't unlink $filename: $!";
-}
-
-
-#--- 1. templateLevelBegin ----------------------------------------------------
-
-$toc->setOptions({
-	'templateLevelBegin' => '"<ul class=toc_$groupId$level>\n"'
-});
-$tocInsertor->insert($toc, "<h1>Header</h1>", {'output' => \$output});
-ok($output, "<ul class=toc_h1>\n<li>Header\n</ul><h1>Header</h1>");
-$toc->setOptions({'templateLevelBegin' => undef});
-
-
-#--- 2. levelToToc -----------------------------------------------------------
-
-$tocGenerator->generate($toc, "<h1>Header1</h1>\n<h2>Header2</h2>");
-$toc->setOptions({'levelToToc' => '1'});
-ok($toc->format(), "<ul>\n<li>Header1\n</ul>");
-$toc->setOptions({'levelToToc' => '.*'});
-
-
-#--- 3. groupToToc -----------------------------------------------------------
-
-$toc->setOptions({
-	'tokenToToc' => [{
-		'level' => 1,
-		'tokenBegin' => '<h1 class=-foo>'
-	}, {
-		'groupId' => 'foo',
-		'level' => 1,
-		'tokenBegin' => '<h1 class=foo>'
-	}]
-});
-$tocGenerator->generate($toc, "<h1>Header1</h1>\n<h1 class=foo>Foo</h1>");
-$toc->setOptions({'groupToToc' => 'foo'});
-ok($toc->format(), "<ul>\n<li>Foo\n</ul>");
-$toc->setOptions({'groupToToc' => '.*'});
-
-
-#--- 4. header & footer -------------------------------------------------------
-
-$toc->setOptions({
-	'tokenToToc' => [{
-		'level'      => 1,
-		'tokenBegin' => '<h1>'
-	}],
-	'header' => '<!-- TocHeader -->',
-	'footer' => '<!-- TocFooter -->',
-});
-$tocInsertor->insert($toc, "<h1>Header1</h1>", {'output' => \$output});
-ok("$output\n", <<EOT);
-<!-- TocHeader --><ul>
-<li>Header1
-</ul><!-- TocFooter --><h1>Header1</h1>
-EOT
-
-
-	# Test 'doSingleStepLevel' => 1
-TestSingleStepLevel1();
-	# Test 'doSingleStepLevel' => 0
-TestSingleStepLevel0();
-
-
-#--- 5. TestSingleStepLevel1 --------------------------------------------------
-
-sub TestSingleStepLevel1 {
-	my $toc          = new HTML::Toc;
-	my $tocGenerator = new HTML::TocGenerator;
-	
-		# Generate ToC
-	$tocGenerator->generate($toc, <<EOT);
-<h1>Header 1</h1>
-<h3>Header 3</h3>
-EOT
-		# Compare output
-	ok($toc->format(), <<EOT);
-
-<!-- Table of Contents generated by Perl - HTML::Toc -->
-<ul>
-   <li><a href=#h-1>Header 1</a>
-   <ul>
-      <ul>
-         <li><a href=#h-1.0.1>Header 3</a>
-      </ul>
-   </ul>
-</ul>
-<!-- End of generated Table of Contents -->
-EOT
-}  # TestSingleStepLevel1()
-
-
-#--- 6. TestSingleStepLevel0 --------------------------------------------------
-
-sub TestSingleStepLevel0 {
-	my $toc          = new HTML::Toc;
-	my $tocGenerator = new HTML::TocGenerator;
-	
-		# Set ToC options
-	$toc->setOptions({'doSingleStepLevel' => 0});
-		# Generate ToC
-	$tocGenerator->generate($toc, <<EOT);
-<h1>Header 1</h1>
-<h3>Header 3</h3>
-EOT
-	 	# Compare output
-	ok($toc->format(), <<EOT);
-
-<!-- Table of Contents generated by Perl - HTML::Toc -->
-<ul>
-   <li><a href=#h-1>Header 1</a>
-   <ul>
-      <li><a href=#h-1.0.1>Header 3</a>
-   </ul>
-</ul>
-<!-- End of generated Table of Contents -->
-EOT
-}  # TestSingleStepLevel0()

examples/includes/HTML-Toc-0.91/t/generate.t

@@ -1,200 +0,0 @@
-#--- generate.t ---------------------------------------------------------------
-# function: Test ToC generation.
-
-use strict;
-use Test;
-
-BEGIN { plan tests => 13; }
-
-use HTML::Toc;
-use HTML::TocGenerator;
-
-my ($filename);
-my $toc          = HTML::Toc->new;
-my $tocGenerator = HTML::TocGenerator->new;
-
-$toc->setOptions({
-	'doLinkToToken' => 0,
-	'levelIndent'   => 0,
-	'header'        => '',
-	'footer'        => '',
-});
-
-
-BEGIN {
-		# Create test file
-	$filename = "file$$.htm";
-	die "$filename is already there" if -e $filename;
-	open(FILE, ">$filename") || die "Can't create $filename: $!";
-	print FILE <<'EOT';
-<h1>Header</h1>
-EOT
-	close(FILE);
-}
-
-
-END {
-		# Remove test file
-	unlink($filename) or warn "Can't unlink $filename: $!";
-}
-
-
-#--- 1. generate --------------------------------------------------------------
-
-$tocGenerator->generate($toc, "<h1>Header</h1>");
-ok($toc->format(), "<ul>\n<li>Header\n</ul>");
-
-
-#--- 2. generateFromFile ------------------------------------------------------
-
-$tocGenerator->generateFromFile($toc, $filename);
-ok($toc->format(), "<ul>\n<li>Header\n</ul>");
-
-
-#--- 3. generateFromFiles -----------------------------------------------------
-
-$tocGenerator->generateFromFile($toc, [$filename, $filename]);
-ok($toc->format(), "<ul>\n<li>Header\n<li>Header\n</ul>");
-	
-
-#--- 4. doLinkToToken -----------------------------------------------------
-
-$toc->setOptions({'doLinkToToken' => 1});
-$tocGenerator->generateFromFile($toc, $filename, {'globalGroups' => 1});
-ok($toc->format(), "<ul>\n<li><a href=#h-1>Header</a>\n</ul>");
-
-
-#--- 5. doLinkToFile -------------------------------------------------------
-
-$toc->setOptions({'doLinkToFile' => 1});
-$tocGenerator->generateFromFile($toc, $filename);
-ok($toc->format(), "<ul>\n<li><a href=$filename#h-1>Header</a>\n</ul>");
-
-
-#--- 6. templateAnchorHrefBegin -----------------------------------------------
-
-	# Set options
-$toc->setOptions({'templateAnchorHrefBegin' => '"test-$file"'});
-	# Generate ToC
-$tocGenerator->generateFromFile($toc, $filename);
-	# Test ToC
-ok($toc->format(), "<ul>\n<li>test-".$filename."Header</a>\n</ul>");
-	# Reset options
-$toc->setOptions({'templateAnchorHrefBegin' => undef});
-
-
-#--- 7. templateAnchorHrefBegin function --------------------------------------
-
-sub AssembleAnchorHrefBegin {
-		# Get arguments
-	my ($aFile, $aGroupId, $aLevel, $aNode) = @_;
-		# Return value
-	return $aFile . $aGroupId . $aLevel . $aNode;
-}  # AssembleAnchorHrefBegin()
-
-
-	# Set options
-$toc->setOptions({'templateAnchorHrefBegin' => \&AssembleAnchorHrefBegin});
-	# Generate ToC
-$tocGenerator->generateFromFile($toc, $filename);
-	# Test ToC
-ok($toc->format(), "<ul>\n<li>".$filename."h11Header</a>\n</ul>");
-	# Reset options
-$toc->setOptions({'templateAnchorHrefBegin' => undef});
-
-
-#--- 8. levelToToc no levels available ---------------------------------------
-
-$toc->setOptions({'levelToToc' => '2'});
-$tocGenerator->generate($toc, "<h1>Header</h1>");
-ok($toc->format(), "");
-
-
-#--- 9. levelToToc level 1 ---------------------------------------------------
-
-	# Set options
-$toc->setOptions({
-	'levelToToc' => '1',
-	'doLinkToToken' => 0,
-});
-$tocGenerator->generate($toc, "<h1>Header1</h1>\n<h2>Header2</h2>");
-ok($toc->format(), "<ul>\n<li>Header1\n</ul>");
-
-
-#--- 10. levelToToc level 2 --------------------------------------------------
-
-	# Set options
-$toc->setOptions({
-	'levelToToc' => '2',
-	'doLinkToToken' => 0,
-});
-$tocGenerator->generate($toc, "<h1>Header1</h1>\n<h2>Header2</h2>");
-ok($toc->format(), "<ul>\n<li>Header2\n</ul>");
-	# Restore options
-$toc->setOptions({
-	'levelToToc' => '.*',
-});
-
-
-#--- 11. tokenToToc empty array ----------------------------------------------
-
-	# Set options
-$toc->setOptions({'tokenToToc' => []});
-$tocGenerator->generate($toc, "<h1>Header</h1>");
-ok($toc->format(), "");
-
-
-#--- 12. groups nested --------------------------------------------------------
-
-$toc->setOptions({
-	'doNestGroup' => 1,
-	'tokenToToc' => [
-		{
-			'level' => 1,
-			'tokenBegin' => '<h1 class=-appendix>'
-		}, {
-			'groupId' => 'appendix',
-			'level' => 1,
-			'tokenBegin' => '<h1 class=appendix>'
-		}
-	]
-});
-$tocGenerator->generate(
-	$toc, "<h1>Header1</h1>\n<h1 class=appendix>Appendix</h1>"
-);
-ok($toc->format() . "\n", <<'EOT');
-<ul>
-<li>Header1
-<ul>
-<li>Appendix
-</ul>
-</ul>
-EOT
-
-
-#--- 13. groups not nested ----------------------------------------------------
-
-$toc->setOptions({
-	'doNestGroup' => 0,
-	'tokenToToc' => [
-		{
-			'level' => 1,
-			'tokenBegin' => '<h1 class=-appendix>'
-		}, {
-			'groupId' => 'appendix',
-			'level' => 1,
-			'tokenBegin' => '<h1 class=appendix>'
-		}
-	]
-});
-$tocGenerator->generate(
-	$toc, "<h1>Header1</h1>\n<h1 class=appendix>Appendix</h1>"
-);
-ok($toc->format() . "\n", <<'EOT');
-<ul>
-<li>Header1
-</ul>
-<ul>
-<li>Appendix
-</ul>
-EOT

examples/includes/HTML-Toc-0.91/t/insert.t

@@ -1,336 +0,0 @@
-#--- insert.t -----------------------------------------------------------------
-# function: Test ToC insertion.
-
-use strict;
-use Test;
-
-BEGIN { plan tests => 10; }
-
-use HTML::Toc;
-use HTML::TocGenerator;
-use HTML::TocInsertor;
-
-my ($output, $content, $filename);
-my $toc          = HTML::Toc->new;
-my $tocGenerator = HTML::TocGenerator->new;
-my $tocInsertor  = HTML::TocInsertor->new;
-
-$toc->setOptions({
-	'doLinkToToken'  => 0,
-	'levelIndent'       => 0,
-	'header'            => "",
-	'footer'            => "",
-});
-
-
-BEGIN {
-		# Create test file
-	$filename = "file$$.htm";
-	die "$filename is already there" if -e $filename;
-	open(FILE, ">$filename") || die "Can't create $filename: $!";
-	print FILE <<'EOT'; close(FILE);
-<h1>Header</h1>
-EOT
-}
-
-
-END {
-		# Remove test file
-	unlink($filename) or warn "Can't unlink $filename: $!";
-}
-
-
-#--- 1. insert before start ---------------------------------------------------
-
-$toc->setOptions({'insertionPoint' => 'before <h1>'});
-	# Generate ToC
-$tocGenerator->generate($toc, "<h1>Header</h1>");
-$tocInsertor->insert($toc, "<h1>Header</h1>", {
-	'output'        => \$output,
-	'doGenerateToc' => 0
-});
-	# Test ToC
-ok($output, "<ul>\n<li>Header\n</ul><h1>Header</h1>");
-
-
-#--- 2. insert after start ----------------------------------------------------
-
-$toc->setOptions({'insertionPoint' => 'after <h1>'});
-	# Generate ToC
-$tocGenerator->generate($toc, "<h1>Header</h1>");
-$tocInsertor->insert($toc, "<h1>Header</h1>", {
-	'output' => \$output,
-	'doGenerateToc' => 0
-});
-	# Test ToC
-ok($output, "<h1><ul>\n<li>Header\n</ul>Header</h1>");
-
-
-#--- 3. insert before end -----------------------------------------------------
-
-$toc->setOptions({'insertionPoint' => 'before </h1>'});
-	# Generate ToC
-$tocGenerator->generate($toc, "<h1>Header</h1>");
-$tocInsertor->insert($toc, "<h1>Header</h1>", {
-	'output' => \$output,
-	'doGenerateToc' => 0
-});
-	# Test ToC
-ok($output, "<h1>Header<ul>\n<li>Header\n</ul></h1>");
-
-
-#--- 4. insert after end ------------------------------------------------------
-
-$toc->setOptions({'insertionPoint' => 'after </h1>'});
-	# Generate ToC
-$tocGenerator->generate($toc, "<h1>Header</h1>");
-$tocInsertor->insert($toc, "<h1>Header</h1>", {
-	'output' => \$output,
-	'doGenerateToc' => 0
-});
-	# Test ToC
-ok($output, "<h1>Header</h1><ul>\n<li>Header\n</ul>");
-
-
-#--- 5. outputFile ------------------------------------------------------------
-
-$toc->setOptions({'insertionPoint' => 'before <h1>'});
-	# Generate ToC
-$tocGenerator->generate($toc, "<h1>Header</h1>");
-	# Insert ToC, output to file
-$tocInsertor->insert($toc, "<h1>Header</h1>", {
-	'outputFile' => $filename,
-	'doGenerateToc' => 0
-});
-	# Read outputfile
-open(FILE, "<$filename") || die "Can't open $filename: $!";
-$content = join('', <FILE>);
-close(FILE);
-	# Test ToC
-ok($output, "<ul>\n<li>Header\n</ul><h1>Header</h1>");
-
-
-#--- 6. empty toc -------------------------------------------------------------
-
-$tocGenerator->generate($toc, "");
-$tocInsertor->insert($toc, "", {
-	'output' => \$output,
-	'doGenerateToc' => 0
-});
-ok($output, "");
-
-
-#--- TestAfterDeclaration() ---------------------------------------------------
-# function: Test putting HTML comment after declaration.  
-
-sub TestAfterDeclaration {
-		# Create objects
-	my $toc         = HTML::Toc->new();
-	my $tocInsertor = HTML::TocInsertor->new();
-	my $output;
-	
-		# Set ToC options
-   $toc->setOptions({
-		'insertionPoint' => "after <!ToC>",
-   });
-		# Generate ToC
-	$tocInsertor->insert($toc, <<EOT, {'output' => \$output});
-<!ToC><body>
-   <h1>Appendix</h1>
-   <h2>Appendix Paragraph</h2>
-   <h1>Appendix</h1>
-   <h2>Appendix Paragraph</h2>
-</body>
-EOT
-		# Test ToC
-	ok($output, <<EOT);
-<!ToC>
-<!-- Table of Contents generated by Perl - HTML::Toc -->
-<ul>
-   <li><a href=#h-1>Appendix</a>
-   <ul>
-      <li><a href=#h-1.1>Appendix Paragraph</a>
-   </ul>
-   <li><a href=#h-2>Appendix</a>
-   <ul>
-      <li><a href=#h-2.1>Appendix Paragraph</a>
-   </ul>
-</ul>
-<!-- End of generated Table of Contents -->
-<body>
-   <a name=h-1><h1>Appendix</h1></a>
-   <a name=h-1.1><h2>Appendix Paragraph</h2></a>
-   <a name=h-2><h1>Appendix</h1></a>
-   <a name=h-2.1><h2>Appendix Paragraph</h2></a>
-</body>
-EOT
-}  # TestAfterDeclaration()
-
-
-#--- TestNumberingStyle() -----------------------------------------------------
-# function: Test numberingstyle.
-
-sub TestNumberingStyle {
-		# Create objects
-	my $toc         = HTML::Toc->new();
-	my $tocInsertor = HTML::TocInsertor->new();
-	my $output;
-	
-		# Set ToC options
-   $toc->setOptions({
-		'numberingStyle'            => 'lower-alpha',
-		'doNumberToken'             => 1,
-      'tokenToToc' => [{
-            'tokenBegin'          => '<h1>',
-			}, {
-            'tokenBegin' 			 => '<h2>',
-            'level'      			 => 2,
-				'numberingStyle'      => 'upper-alpha'
-			}, {
-            'tokenBegin' 			 => '<h3>',
-            'level'      			 => 3,
-				'numberingStyle'      => 'decimal'
-         }]
-   });
-		# Generate ToC
-	$tocInsertor->insert($toc, <<EOT, {'output' => \$output});
-<body>
-   <h1>Chapter</h1>
-   <h2>Paragraph</h2>
-   <h3>Paragraph</h3>
-   <h3>Paragraph</h3>
-   <h3>Paragraph</h3>
-</body>
-EOT
-		# Test ToC
-	ok($output, <<EOT);
-<body>
-<!-- Table of Contents generated by Perl - HTML::Toc -->
-<ul>
-   <li><a href=#h-a>Chapter</a>
-   <ul>
-      <li><a href=#h-a.A>Paragraph</a>
-      <ul>
-         <li><a href=#h-a.A.1>Paragraph</a>
-         <li><a href=#h-a.A.2>Paragraph</a>
-         <li><a href=#h-a.A.3>Paragraph</a>
-      </ul>
-   </ul>
-</ul>
-<!-- End of generated Table of Contents -->
-
-   <a name=h-a><h1>a &nbsp;Chapter</h1></a>
-   <a name=h-a.A><h2>a.A &nbsp;Paragraph</h2></a>
-   <a name=h-a.A.1><h3>a.A.1 &nbsp;Paragraph</h3></a>
-   <a name=h-a.A.2><h3>a.A.2 &nbsp;Paragraph</h3></a>
-   <a name=h-a.A.3><h3>a.A.3 &nbsp;Paragraph</h3></a>
-</body>
-EOT
-}  # TestNumberingStyle()
-
-
-#--- TestReplaceComment() -----------------------------------------------------
-# function: Test replacing HTML comment with ToC.
-
-sub TestReplaceComment {
-		# Create objects
-	my $toc         = HTML::Toc->new();
-	my $tocInsertor = HTML::TocInsertor->new();
-	my $output;
-	
-		# Set ToC options
-   $toc->setOptions({
-		'insertionPoint' => "replace <!-- ToC -->"
-   });
-		# Generate ToC
-	$tocInsertor->insert($toc, <<EOT, {'output' => \$output});
-<!-- ToC -->
-<body>
-   <h1>Appendix</h1>
-   <h2>Appendix Paragraph</h2>
-   <h1>Appendix</h1>
-   <h2>Appendix Paragraph</h2>
-</body>
-EOT
-		# Test ToC
-	ok($output, <<EOT);
-
-<!-- Table of Contents generated by Perl - HTML::Toc -->
-<ul>
-   <li><a href=#h-1>Appendix</a>
-   <ul>
-      <li><a href=#h-1.1>Appendix Paragraph</a>
-   </ul>
-   <li><a href=#h-2>Appendix</a>
-   <ul>
-      <li><a href=#h-2.1>Appendix Paragraph</a>
-   </ul>
-</ul>
-<!-- End of generated Table of Contents -->
-
-<body>
-   <a name=h-1><h1>Appendix</h1></a>
-   <a name=h-1.1><h2>Appendix Paragraph</h2></a>
-   <a name=h-2><h1>Appendix</h1></a>
-   <a name=h-2.1><h2>Appendix Paragraph</h2></a>
-</body>
-EOT
-}  # TestReplaceComment()
-
-
-#--- TestReplaceText() -----------------------------------------------------
-# function: Test replacing HTML comment with ToC.
-
-sub TestReplaceText {
-		# Create objects
-	my $toc         = HTML::Toc->new();
-	my $tocInsertor = HTML::TocInsertor->new();
-	my $output;
-	
-		# Set ToC options
-   $toc->setOptions({
-		'insertionPoint' => "replace ToC will be placed here[,]"
-   });
-		# Generate ToC
-	$tocInsertor->insert($toc, <<EOT, {'output' => \$output});
-The ToC will be placed here, overnight.
-<body>
-   <h1>Appendix</h1>
-   <h2>Appendix Paragraph</h2>
-   <h1>Appendix</h1>
-   <h2>Appendix Paragraph</h2>
-</body>
-EOT
-		# Test ToC
-	ok($output, <<EOT);
-
-<!-- Table of Contents generated by Perl - HTML::Toc -->
-<ul>
-   <li><a href=#h-1>Appendix</a>
-   <ul>
-      <li><a href=#h-1.1>Appendix Paragraph</a>
-   </ul>
-   <li><a href=#h-2>Appendix</a>
-   <ul>
-      <li><a href=#h-2.1>Appendix Paragraph</a>
-   </ul>
-</ul>
-<!-- End of generated Table of Contents -->
-<body>
-   <a name=h-1><h1>Appendix</h1></a>
-   <a name=h-1.1><h2>Appendix Paragraph</h2></a>
-   <a name=h-2><h1>Appendix</h1></a>
-   <a name=h-2.1><h2>Appendix Paragraph</h2></a>
-</body>
-EOT
-}  # TestReplaceText()
-
-
-	# 7.  Test 'numberingStyle'
-TestNumberingStyle();
-	# 8.  Test replace comment
-TestReplaceComment();
-	# 9.  Test after declaration
-TestAfterDeclaration();
-	# 10.  Test replace text
-TestReplaceText();

examples/includes/HTML-Toc-0.91/t/manualTest.t

@@ -1,768 +0,0 @@
-#--- manual.t -----------------------------------------------------------------
-# function: Test HTML::ToC generating a manual.
-
-use strict;
-use Test;
-
-BEGIN { plan tests => 3; }
-
-use HTML::Toc;
-use HTML::TocGenerator;
-use HTML::TocInsertor;
-use HTML::TocUpdator;
-
-
-#--- AssembleTocLine() --------------------------------------------------------
-# function: Assemble ToC line.
-
-sub AssembleTocLine {
-		# Get arguments
-	my ($aLevel, $aGroupId, $aNode, $aSequenceNr, $aText) = @_;
-		# Local variables
-	my ($result);
-
-		# Assemble ToC line
-	SWITCH: {
-		if ($aGroupId eq "prelude") {
-			$result = "<li>$aText\n";
-			last SWITCH;
-		}
-		if ($aGroupId eq "part") {
-			$result = "<li>Part $aNode &nbsp;$aText\n";
-			last SWITCH;
-		}
-		if ($aGroupId eq "h") {
-			$result = "<li>$aSequenceNr. &nbsp;$aText\n";
-			last SWITCH;
-		}
-		else {
-			$result = "<li>$aNode &nbsp;$aText\n";
-			last SWITCH;
-		}
-	}
-
-		# Return value
-	return $result;
-}  # AssembleTocLine()
-
-
-#--- AssembleTokenNumber() ----------------------------------------------------
-# function: Assemble token number.
-
-sub AssembleTokenNumber {
-		# Get arguments
-	my ($aNode, $aGroupId, $aFile, $aGroupLevel, $aLevel, $aToc) = @_;
-		# Local variables
-	my ($result);
-		# Assemble token number
-	SWITCH: {
-		if ($aGroupId eq "part") {
-			$result = "Part $aNode &nbsp;";
-			last SWITCH;
-		}
-		else {
-			$result = "$aNode &nbsp;";
-			last SWITCH;
-		}
-	}
-		# Return value
-	return $result;
-}  # AssembleTokenNumber()
-
-
-#--- TestInsertManualToc ------------------------------------------------------
-# function: Test inserting ToC into manual.
-
-sub TestInsertManualToc {
-	my $output;
-		# Create objects
-	my $toc          = new HTML::Toc;
-	my $tocOfFigures = new HTML::Toc;
-	my $tocOfTables  = new HTML::Toc;
-	my $tocInsertor  = new HTML::TocInsertor;
-	
-		# Set ToC options
-	$toc->setOptions({
-		'doNestGroup'          => 1,
-		'doNumberToken'        => 1,
-		'insertionPoint'       => "replace <!-- Table of Contents -->",
-		'templateLevel'        => \&AssembleTocLine,
-      'templateLevelBegin'   => '"<ul class=toc_$groupId$level>\n"',
-      'templateLevelEnd'     => '"</ul>\n"',
-		'templateTokenNumber'  => \&AssembleTokenNumber,
-      'tokenToToc'           => [{
-            'groupId'        => 'part',
-			   'doNumberToken'  => 1,
-            'level'          => 1,
-            'tokenBegin'     => '<h1 class=part>',
-         }, {
-            'tokenBegin'     => '<h1 class=-[appendix|prelude|hidden|part]>'
-         }, {
-            'tokenBegin'     => '<h2>',
-            'level'          => 2
-         }, {
-            'tokenBegin'     => '<h3>',
-            'level'          => 3
-         }, {
-            'groupId'        => 'appendix',
-            'tokenBegin'     => '<h1 class=appendix>',
-			   'numberingStyle' => 'upper-alpha',
-         }, {
-            'groupId'        => 'appendix',
-            'tokenBegin'     => '<h2 class=appendix>',
-            'level'          => 2
-         }, {
-            'groupId'        => 'prelude',
-            'tokenBegin'     => '<h1 class=prelude>',
-            'level'          => 1,
-			   'doNumberToken'  => 0,
-         }],
-	});
-	$tocOfFigures->setOptions({
-		'doNumberToken'        => 1,
-		'insertionPoint'       => "replace <!-- Table of Figures -->",
-		'templateLevelBegin'   => '"<ol>\n"',
-		'templateLevelEnd'     => '"</ol>\n"',
-		'templateTokenNumber'  => '"Figure $node: &nbsp;"',
-		'tokenToToc'           => [{
-				'groupId'        => 'Figure',
-				'tokenBegin'     => '<p class=captionFigure>'
-			}]
-	});
-	$tocOfTables->setOptions({
-		'doNumberToken'        => 1,
-		'insertionPoint'       => "replace <!-- Table of Tables -->",
-		'templateLevelBegin'   => '"<ol>\n"',
-		'templateLevelEnd'     => '"</ol>\n"',
-		'templateTokenNumber'  => '"Table $node: &nbsp;"',
-		'tokenToToc'           => [{
-				'groupId'        => 'Table',
-				'tokenBegin'     => '<p class=captionTable>'
-			}]
-	});
-		# Insert ToC
-	$tocInsertor->insertIntoFile(
-		[$toc, $tocOfFigures, $tocOfTables], 
-		't/ManualTest/manualTest1.htm', {
-			 'doUseGroupsGlobal' => 1,
-			 'output'            => \$output,
-			 'outputFile'        => 't/ManualTest/manualTest2.htm'
-		}
-	);
-	ok($output, <<EOT);
-<html>
-<head>
-   <title>Manual</title>
-    <style type="text/css">
-       ul.toc_appendix1 { 
-         list-style-type: none;
-         margin-left: 0;
-         margin-top: 1em;
-         margin-bottom: 1em;
-       }
-       ul.toc_h1 {
-         list-style-type: none;
-         margin-left: 1;
-         margin-top: 1em;
-         margin-bottom: 1em;
-       }
-       ul.toc_h2 {
-         list-style-type: none;
-       }
-       ul.toc_h3 {
-         list-style-type: none;
-       }
-       ul.toc_part1 {
-         list-style-type: none;
-         margin-left: 1;
-         margin-top: 1em;
-         margin-bottom: 1em;
-       }
-       ul.toc_prelude1 {
-         list-style: none;
-       }
-       p.captionFigure {
-         font-style: italic;
-         font-weight: bold;
-       }
-       p.captionTable {
-         font-style: italic;
-         font-weight: bold;
-       }
-    </style>
-</head>
-<body>
-
-<a name=prelude-1><h1 class=prelude>Preface</h1></a>
-Better C than never.
-
-<h1 class=hidden>Table of Contents</h1>
-
-<!-- Table of Contents generated by Perl - HTML::Toc -->
-<ul class=toc_prelude1>
-   <li><a href=#prelude-1>Preface</a>
-   <li><a href=#prelude-2>Table of Figures</a>
-   <li><a href=#prelude-3>Table of Tables</a>
-   <li><a href=#prelude-4>Introduction</a>
-   <ul class=toc_part1>
-      <li>Part 1 &nbsp;<a href=#part-1>Disks</a>
-      <ul class=toc_h1>
-         <li>1. &nbsp;<a href=#h-1>Compiler Disk v1</a>
-         <ul class=toc_h2>
-            <li>1. &nbsp;<a href=#h-1.1>System</a>
-            <li>2. &nbsp;<a href=#h-1.2>Standard Library</a>
-         </ul>
-         <li>2. &nbsp;<a href=#h-2>Compiler Disk v2</a>
-         <ul class=toc_h2>
-            <li>1. &nbsp;<a href=#h-2.1>System</a>
-            <ul class=toc_h3>
-               <li>1. &nbsp;<a href=#h-2.1.1>parser.com</a>
-               <li>2. &nbsp;<a href=#h-2.1.2>compiler.com</a>
-               <li>3. &nbsp;<a href=#h-2.1.3>linker.com</a>
-            </ul>
-            <li>2. &nbsp;<a href=#h-2.2>Standard Library</a>
-         </ul>
-         <li>3. &nbsp;<a href=#h-3>Library System Disk</a>
-      </ul>
-      <li>Part 2 &nbsp;<a href=#part-2>Personal</a>
-      <ul class=toc_h1>
-         <li>4. &nbsp;<a href=#h-4>Tips & Tricks</a>
-      </ul>
-      <li>Part 3 &nbsp;<a href=#part-3>Appendixes</a>
-      <ul class=toc_appendix1>
-         <li>A &nbsp;<a href=#appendix-A>Functions Standard Library v1</a>
-         <li>B &nbsp;<a href=#appendix-B>Functions Standard Library v2</a>
-         <li>C &nbsp;<a href=#appendix-C>Functions Graphic Library</a>
-      </ul>
-   </ul>
-   <li><a href=#prelude-5>Bibliography</a>
-</ul>
-<!-- End of generated Table of Contents -->
-
-
-<a name=prelude-2><h1 class=prelude>Table of Figures</h1></a>
-
-<!-- Table of Contents generated by Perl - HTML::Toc -->
-<ol>
-   <li><a href=#Figure-1>Contents Compiler Disk v1</a>
-   <li><a href=#Figure-2>Contents Compiler Disk v2</a>
-</ol>
-<!-- End of generated Table of Contents -->
-
-
-<a name=prelude-3><h1 class=prelude>Table of Tables</h1></a>
-
-<!-- Table of Contents generated by Perl - HTML::Toc -->
-<ol>
-   <li><a href=#Table-1>Compile Steps</a>
-</ol>
-<!-- End of generated Table of Contents -->
-
-
-<a name=prelude-4><h1 class=prelude>Introduction</h1></a>
-Thanks to standardisation and the excellent work of the QWERTY corporation it is possible to learn C with almost any C manual.
-<a name=Table-1><p class=captionTable>Table 1: &nbsp;Compile Steps</p></a>
-<ul><pre>
-   Parser
-   Compiler
-   Linker
-</pre></ul>
-
-<a name=part-1><h1 class=part>Part 1 &nbsp;Disks</h1></a>
-<a name=h-1><h1>1 &nbsp;Compiler Disk v1</h1></a>
-<img src=img.gif alt="Contents Compiler Disk v1">
-<a name=Figure-1><p class=captionFigure>Figure 1: &nbsp;Contents Compiler Disk v1</p></a>
-
-<a name=h-1.1><h2>1.1 &nbsp;System</h2></a>
-<a name=h-1.2><h2>1.2 &nbsp;Standard Library</h2></a>
-
-<a name=h-2><h1>2 &nbsp;Compiler Disk v2</h1></a>
-<img src=img.gif alt="Contents Compiler Disk v2">
-<a name=Figure-2><p class=captionFigure>Figure 2: &nbsp;Contents Compiler Disk v2</p></a>
-
-<a name=h-2.1><h2>2.1 &nbsp;System</h2></a>
-<a name=h-2.1.1><h3>2.1.1 &nbsp;parser.com</h3></a>
-<a name=h-2.1.2><h3>2.1.2 &nbsp;compiler.com</h3></a>
-<a name=h-2.1.3><h3>2.1.3 &nbsp;linker.com</h3></a>
-<a name=h-2.2><h2>2.2 &nbsp;Standard Library</h2></a>
-
-<a name=h-3><h1>3 &nbsp;Library System Disk</h1></a>
-<a name=part-2><h1 class=part>Part 2 &nbsp;Personal</h1></a>
-<a name=h-4><h1>4 &nbsp;Tips & Tricks</h1></a>
-<a name=part-3><h1 class=part>Part 3 &nbsp;Appendixes</h1></a>
-<a name=appendix-A><h1 class=appendix>A &nbsp;Functions Standard Library v1</h1></a>
-<a name=appendix-B><h1 class=appendix>B &nbsp;Functions Standard Library v2</h1></a>
-<a name=appendix-C><h1 class=appendix>C &nbsp;Functions Graphic Library</h1></a>
-<a name=prelude-5><h1 class=prelude>Bibliography</h1></a>
-</body>
-</html>
-EOT
-}  # TestInsertManualToc()
-
-
-#--- TestInsertManualForUpdating() --------------------------------------------
-# function: Test inserting ToC into manual.
-
-sub TestInsertManualForUpdating {
-	my $output;
-		# Create objects
-	my $toc          = new HTML::Toc;
-	my $tocOfFigures = new HTML::Toc;
-	my $tocOfTables  = new HTML::Toc;
-	my $tocUpdator   = new HTML::TocUpdator;
-	
-		# Set ToC options
-	$toc->setOptions({
-		'doNestGroup'          => 1,
-		'doNumberToken'        => 1,
-		'insertionPoint'       => "after <!-- Table of Contents -->",
-		'templateLevel'        => \&AssembleTocLine,
-      'templateLevelBegin'   => '"<ul class=toc_$groupId$level>\n"',
-      'templateLevelEnd'     => '"</ul>\n"',
-		'templateTokenNumber'  => \&AssembleTokenNumber,
-      'tokenToToc'           => [{
-            'groupId'        => 'part',
-			   'doNumberToken'  => 1,
-            'level'          => 1,
-            'tokenBegin'     => '<h1 class=part>',
-         }, {
-            'tokenBegin'     => '<h1 class=-[appendix|prelude|hidden|part]>'
-         }, {
-            'tokenBegin'     => '<h2>',
-            'level'          => 2
-         }, {
-            'tokenBegin'     => '<h3>',
-            'level'          => 3
-         }, {
-            'groupId'        => 'appendix',
-            'tokenBegin'     => '<h1 class=appendix>',
-			   'numberingStyle' => 'upper-alpha',
-         }, {
-            'groupId'        => 'appendix',
-            'tokenBegin'     => '<h2 class=appendix>',
-            'level'          => 2
-         }, {
-            'groupId'        => 'prelude',
-            'tokenBegin'     => '<h1 class=prelude>',
-            'level'          => 1,
-			   'doNumberToken'  => 0,
-         }],
-	});
-	$tocOfFigures->setOptions({
-		'doNumberToken'        => 1,
-		'insertionPoint'       => "after <!-- Table of Figures -->",
-		'templateLevelBegin'   => '"<ol>\n"',
-		'templateLevelEnd'     => '"</ol>\n"',
-		'templateTokenNumber'  => '"Figure $node: &nbsp;"',
-		'tokenToToc'           => [{
-				'groupId'        => 'Figure',
-				'tokenBegin'     => '<p class=captionFigure>'
-			}]
-	});
-	$tocOfTables->setOptions({
-		'doNumberToken'        => 1,
-		'insertionPoint'       => "after <!-- Table of Tables -->",
-		'templateLevelBegin'   => '"<ol>\n"',
-		'templateLevelEnd'     => '"</ol>\n"',
-		'templateTokenNumber'  => '"Table $node: &nbsp;"',
-		'tokenToToc'           => [{
-				'groupId'        => 'Table',
-				'tokenBegin'     => '<p class=captionTable>'
-			}]
-	});
-		# Insert ToC
-	$tocUpdator->updateFile(
-		[$toc, $tocOfFigures, $tocOfTables], 
-		't/ManualTest/manualTest1.htm', {
-			 'doUseGroupsGlobal' => 1,
-			 'output'            => \$output,
-			 'outputFile'        => 't/ManualTest/manualTest3.htm'
-		}
-	);
-	ok($output, <<EOT);
-<html>
-<head>
-   <title>Manual</title>
-    <style type="text/css">
-       ul.toc_appendix1 { 
-         list-style-type: none;
-         margin-left: 0;
-         margin-top: 1em;
-         margin-bottom: 1em;
-       }
-       ul.toc_h1 {
-         list-style-type: none;
-         margin-left: 1;
-         margin-top: 1em;
-         margin-bottom: 1em;
-       }
-       ul.toc_h2 {
-         list-style-type: none;
-       }
-       ul.toc_h3 {
-         list-style-type: none;
-       }
-       ul.toc_part1 {
-         list-style-type: none;
-         margin-left: 1;
-         margin-top: 1em;
-         margin-bottom: 1em;
-       }
-       ul.toc_prelude1 {
-         list-style: none;
-       }
-       p.captionFigure {
-         font-style: italic;
-         font-weight: bold;
-       }
-       p.captionTable {
-         font-style: italic;
-         font-weight: bold;
-       }
-    </style>
-</head>
-<body>
-
-<!-- #BeginTocAnchorNameBegin --><a name=prelude-1><!-- #EndTocAnchorNameBegin --><h1 class=prelude>Preface</h1><!-- #BeginTocAnchorNameEnd --></a><!-- #EndTocAnchorNameEnd -->
-Better C than never.
-
-<h1 class=hidden>Table of Contents</h1>
-<!-- Table of Contents --><!-- #BeginToc -->
-<!-- Table of Contents generated by Perl - HTML::Toc -->
-<ul class=toc_prelude1>
-   <li><a href=#prelude-1>Preface</a>
-   <li><a href=#prelude-2>Table of Figures</a>
-   <li><a href=#prelude-3>Table of Tables</a>
-   <li><a href=#prelude-4>Introduction</a>
-   <ul class=toc_part1>
-      <li>Part 1 &nbsp;<a href=#part-1>Disks</a>
-      <ul class=toc_h1>
-         <li>1. &nbsp;<a href=#h-1>Compiler Disk v1</a>
-         <ul class=toc_h2>
-            <li>1. &nbsp;<a href=#h-1.1>System</a>
-            <li>2. &nbsp;<a href=#h-1.2>Standard Library</a>
-         </ul>
-         <li>2. &nbsp;<a href=#h-2>Compiler Disk v2</a>
-         <ul class=toc_h2>
-            <li>1. &nbsp;<a href=#h-2.1>System</a>
-            <ul class=toc_h3>
-               <li>1. &nbsp;<a href=#h-2.1.1>parser.com</a>
-               <li>2. &nbsp;<a href=#h-2.1.2>compiler.com</a>
-               <li>3. &nbsp;<a href=#h-2.1.3>linker.com</a>
-            </ul>
-            <li>2. &nbsp;<a href=#h-2.2>Standard Library</a>
-         </ul>
-         <li>3. &nbsp;<a href=#h-3>Library System Disk</a>
-      </ul>
-      <li>Part 2 &nbsp;<a href=#part-2>Personal</a>
-      <ul class=toc_h1>
-         <li>4. &nbsp;<a href=#h-4>Tips & Tricks</a>
-      </ul>
-      <li>Part 3 &nbsp;<a href=#part-3>Appendixes</a>
-      <ul class=toc_appendix1>
-         <li>A &nbsp;<a href=#appendix-A>Functions Standard Library v1</a>
-         <li>B &nbsp;<a href=#appendix-B>Functions Standard Library v2</a>
-         <li>C &nbsp;<a href=#appendix-C>Functions Graphic Library</a>
-      </ul>
-   </ul>
-   <li><a href=#prelude-5>Bibliography</a>
-</ul>
-<!-- End of generated Table of Contents -->
-<!-- #EndToc -->
-
-<!-- #BeginTocAnchorNameBegin --><a name=prelude-2><!-- #EndTocAnchorNameBegin --><h1 class=prelude>Table of Figures</h1><!-- #BeginTocAnchorNameEnd --></a><!-- #EndTocAnchorNameEnd -->
-<!-- Table of Figures --><!-- #BeginToc -->
-<!-- Table of Contents generated by Perl - HTML::Toc -->
-<ol>
-   <li><a href=#Figure-1>Contents Compiler Disk v1</a>
-   <li><a href=#Figure-2>Contents Compiler Disk v2</a>
-</ol>
-<!-- End of generated Table of Contents -->
-<!-- #EndToc -->
-
-<!-- #BeginTocAnchorNameBegin --><a name=prelude-3><!-- #EndTocAnchorNameBegin --><h1 class=prelude>Table of Tables</h1><!-- #BeginTocAnchorNameEnd --></a><!-- #EndTocAnchorNameEnd -->
-<!-- Table of Tables --><!-- #BeginToc -->
-<!-- Table of Contents generated by Perl - HTML::Toc -->
-<ol>
-   <li><a href=#Table-1>Compile Steps</a>
-</ol>
-<!-- End of generated Table of Contents -->
-<!-- #EndToc -->
-
-<!-- #BeginTocAnchorNameBegin --><a name=prelude-4><!-- #EndTocAnchorNameBegin --><h1 class=prelude>Introduction</h1><!-- #BeginTocAnchorNameEnd --></a><!-- #EndTocAnchorNameEnd -->
-Thanks to standardisation and the excellent work of the QWERTY corporation it is possible to learn C with almost any C manual.
-<!-- #BeginTocAnchorNameBegin --><a name=Table-1><!-- #EndTocAnchorNameBegin --><p class=captionTable><!-- #BeginTocNumber -->Table 1: &nbsp;<!-- #EndTocNumber -->Compile Steps</p><!-- #BeginTocAnchorNameEnd --></a><!-- #EndTocAnchorNameEnd -->
-<ul><pre>
-   Parser
-   Compiler
-   Linker
-</pre></ul>
-
-<!-- #BeginTocAnchorNameBegin --><a name=part-1><!-- #EndTocAnchorNameBegin --><h1 class=part><!-- #BeginTocNumber -->Part 1 &nbsp;<!-- #EndTocNumber -->Disks</h1><!-- #BeginTocAnchorNameEnd --></a><!-- #EndTocAnchorNameEnd -->
-<!-- #BeginTocAnchorNameBegin --><a name=h-1><!-- #EndTocAnchorNameBegin --><h1><!-- #BeginTocNumber -->1 &nbsp;<!-- #EndTocNumber -->Compiler Disk v1</h1><!-- #BeginTocAnchorNameEnd --></a><!-- #EndTocAnchorNameEnd -->
-<img src=img.gif alt="Contents Compiler Disk v1">
-<!-- #BeginTocAnchorNameBegin --><a name=Figure-1><!-- #EndTocAnchorNameBegin --><p class=captionFigure><!-- #BeginTocNumber -->Figure 1: &nbsp;<!-- #EndTocNumber -->Contents Compiler Disk v1</p><!-- #BeginTocAnchorNameEnd --></a><!-- #EndTocAnchorNameEnd -->
-
-<!-- #BeginTocAnchorNameBegin --><a name=h-1.1><!-- #EndTocAnchorNameBegin --><h2><!-- #BeginTocNumber -->1.1 &nbsp;<!-- #EndTocNumber -->System</h2><!-- #BeginTocAnchorNameEnd --></a><!-- #EndTocAnchorNameEnd -->
-<!-- #BeginTocAnchorNameBegin --><a name=h-1.2><!-- #EndTocAnchorNameBegin --><h2><!-- #BeginTocNumber -->1.2 &nbsp;<!-- #EndTocNumber -->Standard Library</h2><!-- #BeginTocAnchorNameEnd --></a><!-- #EndTocAnchorNameEnd -->
-
-<!-- #BeginTocAnchorNameBegin --><a name=h-2><!-- #EndTocAnchorNameBegin --><h1><!-- #BeginTocNumber -->2 &nbsp;<!-- #EndTocNumber -->Compiler Disk v2</h1><!-- #BeginTocAnchorNameEnd --></a><!-- #EndTocAnchorNameEnd -->
-<img src=img.gif alt="Contents Compiler Disk v2">
-<!-- #BeginTocAnchorNameBegin --><a name=Figure-2><!-- #EndTocAnchorNameBegin --><p class=captionFigure><!-- #BeginTocNumber -->Figure 2: &nbsp;<!-- #EndTocNumber -->Contents Compiler Disk v2</p><!-- #BeginTocAnchorNameEnd --></a><!-- #EndTocAnchorNameEnd -->
-
-<!-- #BeginTocAnchorNameBegin --><a name=h-2.1><!-- #EndTocAnchorNameBegin --><h2><!-- #BeginTocNumber -->2.1 &nbsp;<!-- #EndTocNumber -->System</h2><!-- #BeginTocAnchorNameEnd --></a><!-- #EndTocAnchorNameEnd -->
-<!-- #BeginTocAnchorNameBegin --><a name=h-2.1.1><!-- #EndTocAnchorNameBegin --><h3><!-- #BeginTocNumber -->2.1.1 &nbsp;<!-- #EndTocNumber -->parser.com</h3><!-- #BeginTocAnchorNameEnd --></a><!-- #EndTocAnchorNameEnd -->
-<!-- #BeginTocAnchorNameBegin --><a name=h-2.1.2><!-- #EndTocAnchorNameBegin --><h3><!-- #BeginTocNumber -->2.1.2 &nbsp;<!-- #EndTocNumber -->compiler.com</h3><!-- #BeginTocAnchorNameEnd --></a><!-- #EndTocAnchorNameEnd -->
-<!-- #BeginTocAnchorNameBegin --><a name=h-2.1.3><!-- #EndTocAnchorNameBegin --><h3><!-- #BeginTocNumber -->2.1.3 &nbsp;<!-- #EndTocNumber -->linker.com</h3><!-- #BeginTocAnchorNameEnd --></a><!-- #EndTocAnchorNameEnd -->
-<!-- #BeginTocAnchorNameBegin --><a name=h-2.2><!-- #EndTocAnchorNameBegin --><h2><!-- #BeginTocNumber -->2.2 &nbsp;<!-- #EndTocNumber -->Standard Library</h2><!-- #BeginTocAnchorNameEnd --></a><!-- #EndTocAnchorNameEnd -->
-
-<!-- #BeginTocAnchorNameBegin --><a name=h-3><!-- #EndTocAnchorNameBegin --><h1><!-- #BeginTocNumber -->3 &nbsp;<!-- #EndTocNumber -->Library System Disk</h1><!-- #BeginTocAnchorNameEnd --></a><!-- #EndTocAnchorNameEnd -->
-<!-- #BeginTocAnchorNameBegin --><a name=part-2><!-- #EndTocAnchorNameBegin --><h1 class=part><!-- #BeginTocNumber -->Part 2 &nbsp;<!-- #EndTocNumber -->Personal</h1><!-- #BeginTocAnchorNameEnd --></a><!-- #EndTocAnchorNameEnd -->
-<!-- #BeginTocAnchorNameBegin --><a name=h-4><!-- #EndTocAnchorNameBegin --><h1><!-- #BeginTocNumber -->4 &nbsp;<!-- #EndTocNumber -->Tips & Tricks</h1><!-- #BeginTocAnchorNameEnd --></a><!-- #EndTocAnchorNameEnd -->
-<!-- #BeginTocAnchorNameBegin --><a name=part-3><!-- #EndTocAnchorNameBegin --><h1 class=part><!-- #BeginTocNumber -->Part 3 &nbsp;<!-- #EndTocNumber -->Appendixes</h1><!-- #BeginTocAnchorNameEnd --></a><!-- #EndTocAnchorNameEnd -->
-<!-- #BeginTocAnchorNameBegin --><a name=appendix-A><!-- #EndTocAnchorNameBegin --><h1 class=appendix><!-- #BeginTocNumber -->A &nbsp;<!-- #EndTocNumber -->Functions Standard Library v1</h1><!-- #BeginTocAnchorNameEnd --></a><!-- #EndTocAnchorNameEnd -->
-<!-- #BeginTocAnchorNameBegin --><a name=appendix-B><!-- #EndTocAnchorNameBegin --><h1 class=appendix><!-- #BeginTocNumber -->B &nbsp;<!-- #EndTocNumber -->Functions Standard Library v2</h1><!-- #BeginTocAnchorNameEnd --></a><!-- #EndTocAnchorNameEnd -->
-<!-- #BeginTocAnchorNameBegin --><a name=appendix-C><!-- #EndTocAnchorNameBegin --><h1 class=appendix><!-- #BeginTocNumber -->C &nbsp;<!-- #EndTocNumber -->Functions Graphic Library</h1><!-- #BeginTocAnchorNameEnd --></a><!-- #EndTocAnchorNameEnd -->
-<!-- #BeginTocAnchorNameBegin --><a name=prelude-5><!-- #EndTocAnchorNameBegin --><h1 class=prelude>Bibliography</h1><!-- #BeginTocAnchorNameEnd --></a><!-- #EndTocAnchorNameEnd -->
-</body>
-</html>
-EOT
-}  # TestInsertManualForUpdating()
-
-
-#--- TestUpdateManual() -------------------------------------------------------
-# function: Test inserting ToC into manual.
-
-sub TestUpdateManual {
-	my $output;
-		# Create objects
-	my $toc          = new HTML::Toc;
-	my $tocOfFigures = new HTML::Toc;
-	my $tocOfTables  = new HTML::Toc;
-	my $tocUpdator   = new HTML::TocUpdator;
-	
-		# Set ToC options
-	$toc->setOptions({
-		'doNestGroup'          => 1,
-		'doNumberToken'        => 1,
-		'insertionPoint'       => "after <!-- Table of Contents -->",
-		'templateLevel'        => \&AssembleTocLine,
-      'templateLevelBegin'   => '"<ul class=toc_$groupId$level>\n"',
-      'templateLevelEnd'     => '"</ul>\n"',
-		'templateTokenNumber'  => \&AssembleTokenNumber,
-      'tokenToToc'           => [{
-            'groupId'        => 'part',
-			   'doNumberToken'  => 1,
-            'level'          => 1,
-            'tokenBegin'     => '<h1 class=part>',
-         }, {
-            'tokenBegin'     => '<h1 class=-[appendix|prelude|hidden|part]>'
-         }, {
-            'tokenBegin'     => '<h2>',
-            'level'          => 2
-         }, {
-            'tokenBegin'     => '<h3>',
-            'level'          => 3
-         }, {
-            'groupId'        => 'appendix',
-            'tokenBegin'     => '<h1 class=appendix>',
-			   'numberingStyle' => 'upper-alpha',
-         }, {
-            'groupId'        => 'appendix',
-            'tokenBegin'     => '<h2 class=appendix>',
-            'level'          => 2
-         }, {
-            'groupId'        => 'prelude',
-            'tokenBegin'     => '<h1 class=prelude>',
-            'level'          => 1,
-			   'doNumberToken'  => 0,
-         }],
-	});
-	$tocOfFigures->setOptions({
-		'doNumberToken'        => 1,
-		'insertionPoint'       => "after <!-- Table of Figures -->",
-		'templateLevelBegin'   => '"<ol>\n"',
-		'templateLevelEnd'     => '"</ol>\n"',
-		'templateTokenNumber'  => '"Figure $node: &nbsp;"',
-		'tokenToToc'           => [{
-				'groupId'        => 'Figure',
-				'tokenBegin'     => '<p class=captionFigure>'
-			}]
-	});
-	$tocOfTables->setOptions({
-		'doNumberToken'        => 1,
-		'insertionPoint'       => "after <!-- Table of Tables -->",
-		'templateLevelBegin'   => '"<ol>\n"',
-		'templateLevelEnd'     => '"</ol>\n"',
-		'templateTokenNumber'  => '"Table $node: &nbsp;"',
-		'tokenToToc'           => [{
-				'groupId'        => 'Table',
-				'tokenBegin'     => '<p class=captionTable>'
-			}]
-	});
-		# Insert ToC
-	$tocUpdator->updateFile(
-		[$toc, $tocOfFigures, $tocOfTables], 
-		't/ManualTest/manualTest3.htm', {
-			 'doUseGroupsGlobal' => 1,
-			 'output'            => \$output,
-			 'outputFile'        => 't/ManualTest/manualTest4.htm'
-		}
-	);
-	ok($output, <<EOT);
-<html>
-<head>
-   <title>Manual</title>
-    <style type="text/css">
-       ul.toc_appendix1 { 
-         list-style-type: none;
-         margin-left: 0;
-         margin-top: 1em;
-         margin-bottom: 1em;
-       }
-       ul.toc_h1 {
-         list-style-type: none;
-         margin-left: 1;
-         margin-top: 1em;
-         margin-bottom: 1em;
-       }
-       ul.toc_h2 {
-         list-style-type: none;
-       }
-       ul.toc_h3 {
-         list-style-type: none;
-       }
-       ul.toc_part1 {
-         list-style-type: none;
-         margin-left: 1;
-         margin-top: 1em;
-         margin-bottom: 1em;
-       }
-       ul.toc_prelude1 {
-         list-style: none;
-       }
-       p.captionFigure {
-         font-style: italic;
-         font-weight: bold;
-       }
-       p.captionTable {
-         font-style: italic;
-         font-weight: bold;
-       }
-    </style>
-</head>
-<body>
-
-<!-- #BeginTocAnchorNameBegin --><a name=prelude-1><!-- #EndTocAnchorNameBegin --><h1 class=prelude>Preface</h1><!-- #BeginTocAnchorNameEnd --></a><!-- #EndTocAnchorNameEnd -->
-Better C than never.
-
-<h1 class=hidden>Table of Contents</h1>
-<!-- Table of Contents --><!-- #BeginToc -->
-<!-- Table of Contents generated by Perl - HTML::Toc -->
-<ul class=toc_prelude1>
-   <li><a href=#prelude-1>Preface</a>
-   <li><a href=#prelude-2>Table of Figures</a>
-   <li><a href=#prelude-3>Table of Tables</a>
-   <li><a href=#prelude-4>Introduction</a>
-   <ul class=toc_part1>
-      <li>Part 1 &nbsp;<a href=#part-1>Disks</a>
-      <ul class=toc_h1>
-         <li>1. &nbsp;<a href=#h-1>Compiler Disk v1</a>
-         <ul class=toc_h2>
-            <li>1. &nbsp;<a href=#h-1.1>System</a>
-            <li>2. &nbsp;<a href=#h-1.2>Standard Library</a>
-         </ul>
-         <li>2. &nbsp;<a href=#h-2>Compiler Disk v2</a>
-         <ul class=toc_h2>
-            <li>1. &nbsp;<a href=#h-2.1>System</a>
-            <ul class=toc_h3>
-               <li>1. &nbsp;<a href=#h-2.1.1>parser.com</a>
-               <li>2. &nbsp;<a href=#h-2.1.2>compiler.com</a>
-               <li>3. &nbsp;<a href=#h-2.1.3>linker.com</a>
-            </ul>
-            <li>2. &nbsp;<a href=#h-2.2>Standard Library</a>
-         </ul>
-         <li>3. &nbsp;<a href=#h-3>Library System Disk</a>
-      </ul>
-      <li>Part 2 &nbsp;<a href=#part-2>Personal</a>
-      <ul class=toc_h1>
-         <li>4. &nbsp;<a href=#h-4>Tips & Tricks</a>
-      </ul>
-      <li>Part 3 &nbsp;<a href=#part-3>Appendixes</a>
-      <ul class=toc_appendix1>
-         <li>A &nbsp;<a href=#appendix-A>Functions Standard Library v1</a>
-         <li>B &nbsp;<a href=#appendix-B>Functions Standard Library v2</a>
-         <li>C &nbsp;<a href=#appendix-C>Functions Graphic Library</a>
-      </ul>
-   </ul>
-   <li><a href=#prelude-5>Bibliography</a>
-</ul>
-<!-- End of generated Table of Contents -->
-<!-- #EndToc -->
-
-<!-- #BeginTocAnchorNameBegin --><a name=prelude-2><!-- #EndTocAnchorNameBegin --><h1 class=prelude>Table of Figures</h1><!-- #BeginTocAnchorNameEnd --></a><!-- #EndTocAnchorNameEnd -->
-<!-- Table of Figures --><!-- #BeginToc -->
-<!-- Table of Contents generated by Perl - HTML::Toc -->
-<ol>
-   <li><a href=#Figure-1>Contents Compiler Disk v1</a>
-   <li><a href=#Figure-2>Contents Compiler Disk v2</a>
-</ol>
-<!-- End of generated Table of Contents -->
-<!-- #EndToc -->
-
-<!-- #BeginTocAnchorNameBegin --><a name=prelude-3><!-- #EndTocAnchorNameBegin --><h1 class=prelude>Table of Tables</h1><!-- #BeginTocAnchorNameEnd --></a><!-- #EndTocAnchorNameEnd -->
-<!-- Table of Tables --><!-- #BeginToc -->
-<!-- Table of Contents generated by Perl - HTML::Toc -->
-<ol>
-   <li><a href=#Table-1>Compile Steps</a>
-</ol>
-<!-- End of generated Table of Contents -->
-<!-- #EndToc -->
-
-<!-- #BeginTocAnchorNameBegin --><a name=prelude-4><!-- #EndTocAnchorNameBegin --><h1 class=prelude>Introduction</h1><!-- #BeginTocAnchorNameEnd --></a><!-- #EndTocAnchorNameEnd -->
-Thanks to standardisation and the excellent work of the QWERTY corporation it is possible to learn C with almost any C manual.
-<!-- #BeginTocAnchorNameBegin --><a name=Table-1><!-- #EndTocAnchorNameBegin --><p class=captionTable><!-- #BeginTocNumber -->Table 1: &nbsp;<!-- #EndTocNumber -->Compile Steps</p><!-- #BeginTocAnchorNameEnd --></a><!-- #EndTocAnchorNameEnd -->
-<ul><pre>
-   Parser
-   Compiler
-   Linker
-</pre></ul>
-
-<!-- #BeginTocAnchorNameBegin --><a name=part-1><!-- #EndTocAnchorNameBegin --><h1 class=part><!-- #BeginTocNumber -->Part 1 &nbsp;<!-- #EndTocNumber -->Disks</h1><!-- #BeginTocAnchorNameEnd --></a><!-- #EndTocAnchorNameEnd -->
-<!-- #BeginTocAnchorNameBegin --><a name=h-1><!-- #EndTocAnchorNameBegin --><h1><!-- #BeginTocNumber -->1 &nbsp;<!-- #EndTocNumber -->Compiler Disk v1</h1><!-- #BeginTocAnchorNameEnd --></a><!-- #EndTocAnchorNameEnd -->
-<img src=img.gif alt="Contents Compiler Disk v1">
-<!-- #BeginTocAnchorNameBegin --><a name=Figure-1><!-- #EndTocAnchorNameBegin --><p class=captionFigure><!-- #BeginTocNumber -->Figure 1: &nbsp;<!-- #EndTocNumber -->Contents Compiler Disk v1</p><!-- #BeginTocAnchorNameEnd --></a><!-- #EndTocAnchorNameEnd -->
-
-<!-- #BeginTocAnchorNameBegin --><a name=h-1.1><!-- #EndTocAnchorNameBegin --><h2><!-- #BeginTocNumber -->1.1 &nbsp;<!-- #EndTocNumber -->System</h2><!-- #BeginTocAnchorNameEnd --></a><!-- #EndTocAnchorNameEnd -->
-<!-- #BeginTocAnchorNameBegin --><a name=h-1.2><!-- #EndTocAnchorNameBegin --><h2><!-- #BeginTocNumber -->1.2 &nbsp;<!-- #EndTocNumber -->Standard Library</h2><!-- #BeginTocAnchorNameEnd --></a><!-- #EndTocAnchorNameEnd -->
-
-<!-- #BeginTocAnchorNameBegin --><a name=h-2><!-- #EndTocAnchorNameBegin --><h1><!-- #BeginTocNumber -->2 &nbsp;<!-- #EndTocNumber -->Compiler Disk v2</h1><!-- #BeginTocAnchorNameEnd --></a><!-- #EndTocAnchorNameEnd -->
-<img src=img.gif alt="Contents Compiler Disk v2">
-<!-- #BeginTocAnchorNameBegin --><a name=Figure-2><!-- #EndTocAnchorNameBegin --><p class=captionFigure><!-- #BeginTocNumber -->Figure 2: &nbsp;<!-- #EndTocNumber -->Contents Compiler Disk v2</p><!-- #BeginTocAnchorNameEnd --></a><!-- #EndTocAnchorNameEnd -->
-
-<!-- #BeginTocAnchorNameBegin --><a name=h-2.1><!-- #EndTocAnchorNameBegin --><h2><!-- #BeginTocNumber -->2.1 &nbsp;<!-- #EndTocNumber -->System</h2><!-- #BeginTocAnchorNameEnd --></a><!-- #EndTocAnchorNameEnd -->
-<!-- #BeginTocAnchorNameBegin --><a name=h-2.1.1><!-- #EndTocAnchorNameBegin --><h3><!-- #BeginTocNumber -->2.1.1 &nbsp;<!-- #EndTocNumber -->parser.com</h3><!-- #BeginTocAnchorNameEnd --></a><!-- #EndTocAnchorNameEnd -->
-<!-- #BeginTocAnchorNameBegin --><a name=h-2.1.2><!-- #EndTocAnchorNameBegin --><h3><!-- #BeginTocNumber -->2.1.2 &nbsp;<!-- #EndTocNumber -->compiler.com</h3><!-- #BeginTocAnchorNameEnd --></a><!-- #EndTocAnchorNameEnd -->
-<!-- #BeginTocAnchorNameBegin --><a name=h-2.1.3><!-- #EndTocAnchorNameBegin --><h3><!-- #BeginTocNumber -->2.1.3 &nbsp;<!-- #EndTocNumber -->linker.com</h3><!-- #BeginTocAnchorNameEnd --></a><!-- #EndTocAnchorNameEnd -->
-<!-- #BeginTocAnchorNameBegin --><a name=h-2.2><!-- #EndTocAnchorNameBegin --><h2><!-- #BeginTocNumber -->2.2 &nbsp;<!-- #EndTocNumber -->Standard Library</h2><!-- #BeginTocAnchorNameEnd --></a><!-- #EndTocAnchorNameEnd -->
-
-<!-- #BeginTocAnchorNameBegin --><a name=h-3><!-- #EndTocAnchorNameBegin --><h1><!-- #BeginTocNumber -->3 &nbsp;<!-- #EndTocNumber -->Library System Disk</h1><!-- #BeginTocAnchorNameEnd --></a><!-- #EndTocAnchorNameEnd -->
-<!-- #BeginTocAnchorNameBegin --><a name=part-2><!-- #EndTocAnchorNameBegin --><h1 class=part><!-- #BeginTocNumber -->Part 2 &nbsp;<!-- #EndTocNumber -->Personal</h1><!-- #BeginTocAnchorNameEnd --></a><!-- #EndTocAnchorNameEnd -->
-<!-- #BeginTocAnchorNameBegin --><a name=h-4><!-- #EndTocAnchorNameBegin --><h1><!-- #BeginTocNumber -->4 &nbsp;<!-- #EndTocNumber -->Tips & Tricks</h1><!-- #BeginTocAnchorNameEnd --></a><!-- #EndTocAnchorNameEnd -->
-<!-- #BeginTocAnchorNameBegin --><a name=part-3><!-- #EndTocAnchorNameBegin --><h1 class=part><!-- #BeginTocNumber -->Part 3 &nbsp;<!-- #EndTocNumber -->Appendixes</h1><!-- #BeginTocAnchorNameEnd --></a><!-- #EndTocAnchorNameEnd -->
-<!-- #BeginTocAnchorNameBegin --><a name=appendix-A><!-- #EndTocAnchorNameBegin --><h1 class=appendix><!-- #BeginTocNumber -->A &nbsp;<!-- #EndTocNumber -->Functions Standard Library v1</h1><!-- #BeginTocAnchorNameEnd --></a><!-- #EndTocAnchorNameEnd -->
-<!-- #BeginTocAnchorNameBegin --><a name=appendix-B><!-- #EndTocAnchorNameBegin --><h1 class=appendix><!-- #BeginTocNumber -->B &nbsp;<!-- #EndTocNumber -->Functions Standard Library v2</h1><!-- #BeginTocAnchorNameEnd --></a><!-- #EndTocAnchorNameEnd -->
-<!-- #BeginTocAnchorNameBegin --><a name=appendix-C><!-- #EndTocAnchorNameBegin --><h1 class=appendix><!-- #BeginTocNumber -->C &nbsp;<!-- #EndTocNumber -->Functions Graphic Library</h1><!-- #BeginTocAnchorNameEnd --></a><!-- #EndTocAnchorNameEnd -->
-<!-- #BeginTocAnchorNameBegin --><a name=prelude-5><!-- #EndTocAnchorNameBegin --><h1 class=prelude>Bibliography</h1><!-- #BeginTocAnchorNameEnd --></a><!-- #EndTocAnchorNameEnd -->
-</body>
-</html>
-EOT
-}  # TestUpdateManual()
-
-
-	# Test inserting ToC into manual
-TestInsertManualToc();
-	# Test inserting ToC with update tokens into manual
-TestInsertManualForUpdating();
-	# Test updating ToC
-TestUpdateManual();

examples/includes/HTML-Toc-0.91/t/options.t

@@ -1,194 +0,0 @@
-#--- options.t ----------------------------------------------------------------
-# function: Test HTML::ToC.  In particular test the available options.
-
-use strict;
-use Test;
-
-BEGIN { plan tests => 5; }
-
-use HTML::Toc;
-use HTML::TocGenerator;
-use HTML::TocInsertor;
-use HTML::TocUpdator;
-
-my ($filename);
-
-BEGIN {
-		# Create test file
-	$filename = "file$$.htm";
-	die "$filename is already there" if -e $filename;
-}
-
-
-END {
-		# Remove test file
-	unlink($filename) or warn "Can't unlink $filename: $!";
-}
-
-
-#--- TestAttributeToExcludeToken() --------------------------------------------
-# function: Test 'HTML::Toc' option 'attributeToExcludeToken'
-
-sub TestAttributeToExcludeToken {
-		# Assemble test file
-	open(FILE, ">$filename") || die "Can't create $filename: $!";
-	print FILE <<'EOT'; close(FILE);
-<body>
-   <h1>Chapter 1</h1>
-   <h1 class=appendix>Appendix</h1>
-</body>
-EOT
-
-		# Create objects
-	my $toc          = HTML::Toc->new();
-	my $tocGenerator = HTML::TocGenerator->new();
-	
-   $toc->setOptions({
-		'attributeToExcludeToken' => 'foo',
-		'tokenToToc' => [{
-			'tokenBegin' => '<h1 class=foodix>'
-		}]
-   });
-		# Generate ToC
-	$tocGenerator->generateFromFile($toc, $filename);
-		# Test ToC
-	ok($toc->format(), <<EOT);
-
-<!-- Table of Contents generated by Perl - HTML::Toc -->
-<ul>
-   <li><a href=#h-1>Chapter 1</a>
-</ul>
-<!-- End of generated Table of Contents -->
-EOT
-}  # TestAttributeToExcludeToken()
-
-
-#--- TestAttributeToTocToken() ------------------------------------------------
-# function: Test 'HTML::Toc' option 'attributeToTocToken'
-
-sub TestAttributeToTocToken {
-		# Assemble test file
-	open(FILE, ">$filename") || die "Can't create $filename: $!";
-	print FILE <<'EOT'; close(FILE);
-<body>
-   <img src=test.gif alt=Picture>
-</body>
-</html>
-EOT
-
-		# Create objects
-	my $toc          = HTML::Toc->new();
-	my $tocGenerator = HTML::TocGenerator->new();
-	
-   $toc->setOptions({
-   	'attributeToTocToken' => 'foo',
-      'tokenToToc'   => [{
-         'groupId'    => 'image',
-         'tokenBegin' => '<img alt=foo>'
-      }],
-   });
-		# Generate ToC
-	$tocGenerator->generateFromFile($toc, $filename);
-		# Test ToC
-	ok($toc->format(), <<EOT);
-
-<!-- Table of Contents generated by Perl - HTML::Toc -->
-<ul>
-   <li><a href=#image-1>Picture</a>
-</ul>
-<!-- End of generated Table of Contents -->
-EOT
-}  # TestAttributeToTocToken()
-
-
-#--- TestNumberingStyleDecimal ------------------------------------------------
-# function: Test 'decimal' numbering style.
-
-sub TestNumberingStyleDecimal {
-		# Local variables
-	my $output;
-		# Create objects
-	my $toc         = HTML::Toc->new();
-	my $tocInsertor = HTML::TocInsertor->new();
-	
-   $toc->setOptions({
-		'doNumberToken' => 1,
-      'tokenToToc'   => [{
-			'level' => 1,
-			'tokenBegin' => '<h1>',
-			'numberingStyle' => 'decimal'
-      }],
-   });
-		# Generate ToC
-	$tocInsertor->insert($toc, "<h1>Header</h1>", {'output' => \$output});
-		# Test ToC
-	ok("$output\n", <<EOT);
-<a name=h-1><h1>1 &nbsp;Header</h1></a>
-EOT
-}  # TestNumberingStyleDecimal()
-
-
-#--- TestNumberingStyleLowerAlpha ---------------------------------------------
-# function: Test 'lower-alpha' numbering style.
-
-sub TestNumberingStyleLowerAlpha {
-		# Local variables
-	my $output;
-		# Create objects
-	my $toc         = HTML::Toc->new();
-	my $tocInsertor = HTML::TocInsertor->new();
-	
-   $toc->setOptions({
-		'doNumberToken' => 1,
-      'tokenToToc'   => [{
-			'level' => 1,
-			'tokenBegin' => '<h1>',
-			'numberingStyle' => 'lower-alpha'
-      }],
-   });
-		# Generate ToC
-	$tocInsertor->insert($toc, "<h1>Header</h1>", {'output' => \$output});
-		# Test ToC
-	ok("$output\n", <<EOT);
-<a name=h-a><h1>a &nbsp;Header</h1></a>
-EOT
-}  # TestNumberingStyleLowerAlpha()
-
-
-#--- TestNumberingStyleUpperAlpha ---------------------------------------------
-# function: Test 'upper-alpha' numbering style.
-
-sub TestNumberingStyleUpperAlpha {
-		# Local variables
-	my $output;
-		# Create objects
-	my $toc         = HTML::Toc->new();
-	my $tocInsertor = HTML::TocInsertor->new();
-	
-   $toc->setOptions({
-		'doNumberToken' => 1,
-      'tokenToToc'   => [{
-			'level' => 1,
-			'tokenBegin' => '<h1>',
-			'numberingStyle' => 'upper-alpha'
-      }],
-   });
-		# Generate ToC
-	$tocInsertor->insert($toc, "<h1>Header</h1>", {'output' => \$output});
-		# Test ToC
-	ok("$output\n", <<EOT);
-<a name=h-A><h1>A &nbsp;Header</h1></a>
-EOT
-}  # TestNumberingStyleUpperAlpha()
-
-
-	# Test 'attributeToTocToken'
-TestAttributeToTocToken();
-	# Test 'attributeToExcludeToken'
-TestAttributeToExcludeToken();
-	# Test 'numberingStyleDecimal'
-TestNumberingStyleDecimal();
-	# Test 'numberingStyleLowerAlpha'
-TestNumberingStyleLowerAlpha();
-	# Test 'numberingStyleUpperAlpha'
-TestNumberingStyleUpperAlpha();

examples/includes/HTML-Toc-0.91/t/podExamples.t

@@ -1,709 +0,0 @@
-#--- podExamples.t ------------------------------------------------------------
-# function: Test HTML::ToC.  In particular test the examples as described in 
-#           the POD documentation.
-
-use strict;
-use Test;
-
-BEGIN { plan tests => 13; }
-
-use HTML::Toc;
-use HTML::TocGenerator;
-use HTML::TocInsertor;
-use HTML::TocUpdator;
-
-my ($filename, $filename2);
-	
-
-BEGIN {
-		# Create test file
-	$filename = "tmp.htm";
-	die "$filename is already there" if -e $filename;
-		# Create test file 2
-	$filename2 = "tmp2.htm";
-	die "$filename2 is already there" if -e $filename2;
-}
-
-
-END {
-		# Remove test file
-	unlink($filename) or warn "Can't unlink $filename: $!";
-		# Remove test file 2
-	unlink($filename2) or warn "Can't unlink $filename2: $!";
-}
-
-
-#--- TestExtendFromFile() --------------------------------------------------
-# function: Test 'HTML::TocGenerator->extendFromFile()
-
-sub TestExtendFromFile {
-		# Assemble test file
-	open(FILE, ">$filename") || die "Can't create $filename: $!";
-	print FILE <<'EOT'; close(FILE);
-<body>
-   <h1>Chapter of document 1</h1>
-</body>
-EOT
-
-		# Assemble test file 2
-	open(FILE, ">$filename2") || die "Can't create $filename2: $!";
-	print FILE <<'EOT'; close(FILE);
-<html>
-<body>
-   <h1>Chapter of document 2</h1>
-</body>
-</html>
-EOT
-
-		# Create objects
-	my $toc          = HTML::Toc->new();
-	my $tocGenerator = HTML::TocGenerator->new();
-	
-		# Set ToC options
-   $toc->setOptions({'doLinkToFile' => 1});
-		# Generate ToC
-	$tocGenerator->generateFromFile($toc, $filename);
-	$tocGenerator->extendFromFile($toc, $filename2);
-		# Test ToC
-	ok($toc->format(), <<EOT);
-
-<!-- Table of Contents generated by Perl - HTML::Toc -->
-<ul>
-   <li><a href=tmp.htm#h-1>Chapter of document 1</a>
-   <li><a href=tmp2.htm#h-2>Chapter of document 2</a>
-</ul>
-<!-- End of generated Table of Contents -->
-EOT
-}  # TestExtendFromFile()
-
-
-#--- TestGenerateFromFiles() --------------------------------------------------
-# function: Test 'HTML::TocGenerator->generateFromFile()
-
-sub TestGenerateFromFiles {
-		# Assemble test file
-	open(FILE, ">$filename") || die "Can't create $filename: $!";
-	print FILE <<'EOT'; close(FILE);
-<body>
-   <h1>Chapter of document 1</h1>
-</body>
-EOT
-
-		# Assemble test file 2
-	open(FILE, ">$filename2") || die "Can't create $filename2: $!";
-	print FILE <<'EOT'; close(FILE);
-<html>
-<body>
-   <h1>Chapter of document 2</h1>
-</body>
-</html>
-EOT
-
-		# Create objects
-	my $toc          = HTML::Toc->new();
-	my $tocGenerator = HTML::TocGenerator->new();
-	
-		# Set ToC options
-   $toc->setOptions({'doLinkToFile' => 1});
-		# Generate ToC
-	$tocGenerator->generateFromFile($toc, [$filename, $filename2]);
-		# Test ToC
-	ok($toc->format(), <<EOT);
-
-<!-- Table of Contents generated by Perl - HTML::Toc -->
-<ul>
-   <li><a href=tmp.htm#h-1>Chapter of document 1</a>
-   <li><a href=tmp2.htm#h-2>Chapter of document 2</a>
-</ul>
-<!-- End of generated Table of Contents -->
-EOT
-}  # TestGenerateFromFiles()
-
-
-#--- TestGenerateFromFiles() --------------------------------------------------
-# function: Test 'HTML::TocGenerator->generateFromFile() using multiple files.
-
-sub TestGenerateFromFile {
-		# Assemble test file 1
-	open(FILE, ">$filename") || die "Can't create $filename: $!";
-	print FILE <<'EOT'; close(FILE);
-<html>
-<body>
-   <h1>Chapter</h1>
-</body>
-</html>
-EOT
-
-		# Create objects
-	my $toc          = HTML::Toc->new();
-	my $tocGenerator = HTML::TocGenerator->new();
-	
-		# Generate ToC
-	$tocGenerator->generateFromFile($toc, $filename);
-		# Test ToC
-	ok($toc->format(), <<EOT);
-
-<!-- Table of Contents generated by Perl - HTML::Toc -->
-<ul>
-   <li><a href=#h-1>Chapter</a>
-</ul>
-<!-- End of generated Table of Contents -->
-EOT
-}  # TestGenerateFromFile()
-
-
-#--- TestInsertIntoFile() -----------------------------------------------------
-# function: Test 'HTML::TocInsertor->insertIntoFile()
-
-sub TestInsertIntoFile {
-		# Assemble test file
-	open(FILE, ">$filename") || die "Can't create $filename: $!";
-	print FILE <<'EOT'; close(FILE);
-<html>
-<body>
-   <h1>Chapter</h1>
-</body>
-</html>
-EOT
-
-		# Create objects
-	my $toc         = HTML::Toc->new();
-	my $tocInsertor = HTML::TocInsertor->new();
-	my $output;
-	
-		# Generate ToC
-	$tocInsertor->insertIntoFile($toc, $filename, {'output' => \$output});
-		# Test ToC
-	ok($output, <<EOT);
-<html>
-<body>
-<!-- Table of Contents generated by Perl - HTML::Toc -->
-<ul>
-   <li><a href=#h-1>Chapter</a>
-</ul>
-<!-- End of generated Table of Contents -->
-
-   <a name=h-1><h1>Chapter</h1></a>
-</body>
-</html>
-EOT
-}  # TestInsertIntoFile()
-
-
-#--- TestInsertIntoFileUsingTocUpdator() --------------------------------------
-# function: Test 'HTML::TocUpdator->insertIntoFile()
-
-sub TestInsertIntoFileUsingTocUpdator {
-		# Assemble test file
-	open(FILE, ">$filename") || die "Can't create $filename: $!";
-	print FILE <<'EOT'; close(FILE);
-<html>
-<body>
-   <h1>
-   Chapter
-   </h1>
-</body>
-</html>
-EOT
-
-		# Create objects
-	my $toc        = HTML::Toc->new();
-	my $tocUpdator = HTML::TocUpdator->new();
-	my $output;
-	
-		# Generate ToC
-	$tocUpdator->insertIntoFile($toc, $filename, {'output' => \$output});
-		# Test ToC
-	ok($output, <<EOT);
-<html>
-<body><!-- #BeginToc -->
-<!-- Table of Contents generated by Perl - HTML::Toc -->
-<ul>
-   <li><a href=#h-1> Chapter </a>
-</ul>
-<!-- End of generated Table of Contents -->
-<!-- #EndToc -->
-   <!-- #BeginTocAnchorNameBegin --><a name=h-1><!-- #EndTocAnchorNameBegin --><h1>
-   Chapter
-   </h1><!-- #BeginTocAnchorNameEnd --></a><!-- #EndTocAnchorNameEnd -->
-</body>
-</html>
-EOT
-}  # TestInsertIntoFileUsingTocUpdator()
-
-
-#--- TestGlobalGroups0() ------------------------------------------------------
-# function: Test 'HTML::TocGenerator' option 'doUseGroupsGlobal = 0'.
-
-sub TestGlobalGroups0 {
-		# Assemble test file
-	open(FILE, ">$filename") || die "Can't create $filename: $!";
-	print FILE <<'EOT'; close(FILE);
-<h1>Chapter</h1>
-<h2>Paragraph</h2>
-EOT
-
-		# Create objects
-	my $toc1         = HTML::Toc->new();
-	my $toc2         = HTML::Toc->new();
-	my $tocGenerator = HTML::TocGenerator->new();
-
-		# Set options
-	$toc1->setOptions({
-		'header'      => '',
-		'footer'      => '',
-		'tokenToToc' => [{'tokenBegin' => '<h1>'}]
-	});
-	$toc2->setOptions({
-		'header'      => '',
-		'footer'      => '',
-		'tokenToToc' => [{'tokenBegin' => '<h2>'}]
-	});
-		# Generate ToC
-	$tocGenerator->generateFromFile([$toc1, $toc2], $filename);
-		# Test ToC
-	ok($toc1->format() . $toc2->format() . "\n", <<'EOT');
-<ul>
-   <li><a href=#h-1>Chapter</a>
-</ul><ul>
-   <li><a href=#h-1>Paragraph</a>
-</ul>
-EOT
-}	# TestGlobalGroups0()
-
-
-#--- TestGlobalGroups1() ------------------------------------------------------
-# function: Test 'HTML::TocGenerator' option 'doUseGroupsGlobal = 0'.
-
-sub TestGlobalGroups1 {
-		# Assemble test file
-	open(FILE, ">$filename") || die "Can't create $filename: $!";
-	print FILE <<'EOT';
-<h1>Chapter</h1>
-<h2>Paragraph</h2>
-EOT
-	close(FILE);
-
-		# Create objects
-	my $toc1         = HTML::Toc->new();
-	my $toc2         = HTML::Toc->new();
-	my $tocGenerator = HTML::TocGenerator->new();
-
-		# Set options
-	$toc1->setOptions({
-		'header'      => '',
-		'footer'      => '',
-		'tokenToToc' => [{'tokenBegin' => '<h1>'}]
-	});
-	$toc2->setOptions({
-		'header'      => '',
-		'footer'      => '',
-		'tokenToToc' => [{'tokenBegin' => '<h2>'}]
-	});
-		# Generate ToC
-	$tocGenerator->generateFromFile(
-		[$toc1, $toc2], $filename, {'doUseGroupsGlobal' => 1}
-	);
-		# Test ToC
-	ok($toc1->format() . $toc2->format() . "\n", <<'EOT');
-<ul>
-   <li><a href=#h-1>Chapter</a>
-</ul><ul>
-   <li><a href=#h-2>Paragraph</a>
-</ul>
-EOT
-}	# TestGlobalGroups1()
-
-
-#--- TestMultipleGroupsAppendix() ---------------------------------------------
-# function: Test multiple ToCs
-
-sub TestMultipleGroupsAppendix() {
-		# Create objects
-	my $toc         = HTML::Toc->new();
-	my $tocInsertor = HTML::TocInsertor->new();
-	my $output;
-	
-		# Set ToC options
-	$toc->setOptions({
-		'tokenToToc' => [{
-				'tokenBegin' => '<h1 class=-appendix>'
-			}, {
-				'tokenBegin' => '<h2 class=-appendix>',
-				'level'      => 2
-			}, {
-				'groupId'    => 'appendix',
-				'tokenBegin' => '<h1 class=appendix>',
-			}, {
-				'groupId'    => 'appendix',
-				'tokenBegin' => '<h2 class=appendix>',
-				'level'      => 2
-			}],
-	});
-		# Generate ToC
-	$tocInsertor->insert($toc, <<EOT, {'output' => \$output});
-<body>
-   <h1>Chapter</h1>
-   <h2>Paragraph</h2>
-   <h3>Subparagraph</h3>
-   <h1>Chapter</h1>
-   <h1 class=appendix>Appendix Chapter</h1>
-   <h2 class=appendix>Appendix Paragraph</h2>
-</body>
-EOT
-		# Test ToC
-	ok($output, <<EOT);
-<body>
-<!-- Table of Contents generated by Perl - HTML::Toc -->
-<ul>
-   <li><a href=#h-1>Chapter</a>
-   <ul>
-      <li><a href=#h-1.1>Paragraph</a>
-   </ul>
-   <li><a href=#h-2>Chapter</a>
-</ul>
-<ul>
-   <li><a href=#appendix-1>Appendix Chapter</a>
-   <ul>
-      <li><a href=#appendix-1.1>Appendix Paragraph</a>
-   </ul>
-</ul>
-<!-- End of generated Table of Contents -->
-
-   <a name=h-1><h1>Chapter</h1></a>
-   <a name=h-1.1><h2>Paragraph</h2></a>
-   <h3>Subparagraph</h3>
-   <a name=h-2><h1>Chapter</h1></a>
-   <a name=appendix-1><h1 class=appendix>Appendix Chapter</h1></a>
-   <a name=appendix-1.1><h2 class=appendix>Appendix Paragraph</h2></a>
-</body>
-EOT
-}  # TestMultipleGroupsAppendix()
-
-
-#--- TestMultipleGroupsPart() -------------------------------------------------
-# function: Test multiple ToCs
-
-sub TestMultipleGroupsPart() {
-		# Create objects
-	my $toc         = HTML::Toc->new();
-	my $tocInsertor = HTML::TocInsertor->new();
-	my $output;
-	
-		# Set ToC options
-	$toc->setOptions({
-		'tokenToToc' => [{
-				'tokenBegin' => '<h1 class=-part>'
-			}, {
-				'tokenBegin' => '<h2 class=-part>',
-				'level'      => 2,
-			}, {
-				'groupId'        => 'part',
-				'tokenBegin'     => '<h1 class=part>',
-				'level'          => 1,
-				'doNumberToken'  => 1,
-				'numberingStyle' => 'upper-alpha'
-			}]
-	});
-		# Generate ToC
-	$tocInsertor->insert($toc, <<EOT, {'output' => \$output});
-<body>
-   <h1 class=part>First Part</h1>
-   <h1>Chapter</h1>
-   <h2>Paragraph</h2>
-   <h1 class=part>Second Part</h1>
-   <h1>Chapter</h1>
-   <h2>Paragraph</h2>
-</body>
-EOT
-		# Test ToC
-	ok($output, <<EOT);
-<body>
-<!-- Table of Contents generated by Perl - HTML::Toc -->
-<ul>
-   <li><a href=#part-A>First Part</a>
-</ul>
-<ul>
-   <li><a href=#h-1>Chapter</a>
-   <ul>
-      <li><a href=#h-1.1>Paragraph</a>
-   </ul>
-</ul>
-<ul>
-   <li><a href=#part-B>Second Part</a>
-</ul>
-<ul>
-   <li><a href=#h-2>Chapter</a>
-   <ul>
-      <li><a href=#h-2.1>Paragraph</a>
-   </ul>
-</ul>
-<!-- End of generated Table of Contents -->
-
-   <a name=part-A><h1 class=part>A &nbsp;First Part</h1></a>
-   <a name=h-1><h1>Chapter</h1></a>
-   <a name=h-1.1><h2>Paragraph</h2></a>
-   <a name=part-B><h1 class=part>B &nbsp;Second Part</h1></a>
-   <a name=h-2><h1>Chapter</h1></a>
-   <a name=h-2.1><h2>Paragraph</h2></a>
-</body>
-EOT
-}  # TestMultipleGroupsPart()
-
-
-#--- TestMultipleTocs() -------------------------------------------------------
-# function: Test multiple ToCs
-
-sub TestMultipleTocs() {
-		# Assemble test file
-	open(FILE, ">$filename") || die "Can't create $filename: $!";
-	print FILE <<'EOT'; close(FILE);
-<body>
-   <h1>Header One</h1>
-   <img src=test1.gif alt="First picture">
-   <h2>Paragraph One</h2>
-   <img src=test2.gif alt="Second picture">
-</body>
-EOT
-
-		# Create objects
-	my $toc1        = HTML::Toc->new();
-	my $toc2        = HTML::Toc->new();
-	my $tocInsertor = HTML::TocInsertor->new();
-	my $output;
-	
-		# Set ToC options
-	$toc2->setOptions({
-		'tokenToToc'             => [{
-			'groupId'    => 'image',
-			'tokenBegin' => '<img alt=@>'
-		}],
-	});
-		# Generate ToC
-	$tocInsertor->insertIntoFile(
-		[$toc1, $toc2], $filename, {'output' => \$output}
-	);
-		# Test ToC
-	ok($output, <<EOT);
-<body>
-<!-- Table of Contents generated by Perl - HTML::Toc -->
-<ul>
-   <li><a href=#h-1>Header One</a>
-   <ul>
-      <li><a href=#h-1.1>Paragraph One</a>
-   </ul>
-</ul>
-<!-- End of generated Table of Contents -->
-
-<!-- Table of Contents generated by Perl - HTML::Toc -->
-<ul>
-   <li><a href=#image-1>First picture</a>
-   <li><a href=#image-2>Second picture</a>
-</ul>
-<!-- End of generated Table of Contents -->
-
-   <a name=h-1><h1>Header One</h1></a>
-   <a name=image-1><img src=test1.gif alt="First picture"></a>
-   <a name=h-1.1><h2>Paragraph One</h2></a>
-   <a name=image-2><img src=test2.gif alt="Second picture"></a>
-</body>
-EOT
-}  # TestMultipleTocs()
-
-
-#--- TestSpecifyNumberedList() ------------------------------------------------
-# function: Test specifying numbered list.
-
-sub TestSpecifyNumberedList {
-		# Assemble test file
-	open(FILE, ">$filename") || die "Can't create $filename: $!";
-	print FILE <<'EOT'; close(FILE);
-<body>
-   <h1>Chapter</h1>
-	<h2>Paragraph</h2>
-</body>
-EOT
-
-		# Create objects
-	my $toc        = HTML::Toc->new();
-   my $tocGenerator = HTML::TocGenerator->new();
-	
-		# Set ToC options
-	$toc->setOptions({
-		'templateLevelBegin' => '"<ol>\n"',
-		'templateLevelEnd'   => '"</ol>\n"',
-	});
-		# Generate ToC
-	$tocGenerator->generateFromFile($toc, $filename);
-		# Test ToC
-	ok($toc->format(), <<EOT);
-
-<!-- Table of Contents generated by Perl - HTML::Toc -->
-<ol>
-   <li><a href=#h-1>Chapter</a>
-   <ol>
-      <li><a href=#h-1.1>Paragraph</a>
-   </ol>
-</ol>
-<!-- End of generated Table of Contents -->
-EOT
-}  # TestSpecifyNumberedList()
-
-
-#--- TestUpdateFile() ---------------------------------------------------------
-# function: Test 'HTML::TocUpdator->updateFile()'
-
-sub TestUpdateFile {
-		# Assemble test file
-	open(FILE, ">$filename") || die "Can't create $filename: $!";
-	print FILE <<'EOT'; close(FILE);
-<html>
-<body><!-- #BeginToc -->
-foo
-<!-- #EndToc -->
-   <!-- #BeginTocAnchorNameBegin -->bar<!-- #EndTocAnchorNameBegin --><h1>
-   Chapter
-   </h1><!-- #BeginTocAnchorNameEnd -->foo<!-- #EndTocAnchorNameEnd -->
-</body>
-</html>
-EOT
-
-		# Create objects
-	my $toc        = HTML::Toc->new();
-	my $tocUpdator = HTML::TocUpdator->new();
-	my $output;
-	
-		# Generate ToC
-	$tocUpdator->updateFile($toc, $filename, {'output' => \$output});
-		# Test ToC
-	ok($output, <<EOT);
-<html>
-<body><!-- #BeginToc -->
-<!-- Table of Contents generated by Perl - HTML::Toc -->
-<ul>
-   <li><a href=#h-1> Chapter </a>
-</ul>
-<!-- End of generated Table of Contents -->
-<!-- #EndToc -->
-   <!-- #BeginTocAnchorNameBegin --><a name=h-1><!-- #EndTocAnchorNameBegin --><h1>
-   Chapter
-   </h1><!-- #BeginTocAnchorNameEnd --></a><!-- #EndTocAnchorNameEnd -->
-</body>
-</html>
-EOT
-}  # TestUpdateFile()
-
-
-#--- TestUsingCSS() -----------------------------------------------------------
-# function: Test multiple ToCs
-
-sub TestUsingCSS() {
-
-		# Create objects
-	my $toc          = new HTML::Toc;
-	my $tocInsertor  = new HTML::TocInsertor;
-	my $output;
-
-   $toc->setOptions({
-		'templateLevelBegin'   => '"<ol class=toc_$groupId$level>\n"',
-		'templateLevelEnd'     => '"</ol>\n"',
-		'doNumberToken'        => 1,
-      'tokenToToc' => [{
-				'groupId'        => 'appendix',
-            'tokenBegin'     => '<h1>',
-				'numberingStyle' => 'upper-alpha'
-			}, {
-				'groupId'        => 'appendix',
-            'tokenBegin' 	  => '<h2>',
-            'level'      	  => 2,
-         }]
-   });
-	$tocInsertor->insert($toc, <<EOT);
-<html>
-<head>
-   <style type="text/css">
-      ol.toc_appendix1 { list-style-type: upper-alpha }
-   </style>
-</head>
-<body>
-   <h1>Appendix</h1>
-   <h2>Appendix Paragraph</h2>
-   <h1>Appendix</h1>
-   <h2>Appendix Paragraph</h2>
-</body>
-</html>
-EOT
-		# Insert ToC
-	$tocInsertor->insert($toc, <<EOT, {'output' => \$output});
-<html>
-<head>
-   <style type="text/css">
-      ol.toc_appendix1 { list-style-type: upper-alpha }
-   </style>
-</head>
-<body>
-   <h1>Appendix</h1>
-   <h2>Appendix Paragraph</h2>
-   <h1>Appendix</h1>
-   <h2>Appendix Paragraph</h2>
-</body>
-</html>
-EOT
-		# Test ToC
-	ok($output, <<EOT);
-<html>
-<head>
-   <style type="text/css">
-      ol.toc_appendix1 { list-style-type: upper-alpha }
-   </style>
-</head>
-<body>
-<!-- Table of Contents generated by Perl - HTML::Toc -->
-<ol class=toc_appendix1>
-   <li><a href=#appendix-A>Appendix</a>
-   <ol class=toc_appendix2>
-      <li><a href=#appendix-A.1>Appendix Paragraph</a>
-   </ol>
-   <li><a href=#appendix-B>Appendix</a>
-   <ol class=toc_appendix2>
-      <li><a href=#appendix-B.1>Appendix Paragraph</a>
-   </ol>
-</ol>
-<!-- End of generated Table of Contents -->
-
-   <a name=appendix-A><h1>A &nbsp;Appendix</h1></a>
-   <a name=appendix-A.1><h2>A.1 &nbsp;Appendix Paragraph</h2></a>
-   <a name=appendix-B><h1>B &nbsp;Appendix</h1></a>
-   <a name=appendix-B.1><h2>B.1 &nbsp;Appendix Paragraph</h2></a>
-</body>
-</html>
-EOT
-}  # TestUsingCSS()
-
-
-	# Test 'extendFromFile()'
-TestExtendFromFile();
-	# Test 'generateFromFile()'
-TestGenerateFromFile();
-	# Test 'generateFromFiles()'
-TestGenerateFromFiles();
-	# Test 'doUseGroupsGlobal = 0'
-TestGlobalGroups0();
-	# Test 'doUseGroupsGlobal = 1'
-TestGlobalGroups1();
-	# Test 'tocInsertor->insertIntoFile'
-TestInsertIntoFile();
-	# Test 'tocUpdator->insertIntoFile'
-TestInsertIntoFileUsingTocUpdator();
-	# Test additional 'appendix' group
-TestMultipleGroupsAppendix();
-	# Test additional 'part' group
-TestMultipleGroupsPart();
-	# Test multiple ToCs
-TestMultipleTocs();
-	# Test specifying numbered list
-TestSpecifyNumberedList();
-	# Test 'updateFile()'
-TestUpdateFile();
-	# Test using CSS
-TestUsingCSS();

examples/includes/HTML-Toc-0.91/t/propagate.t

@@ -1,176 +0,0 @@
-#--- propagate.t --------------------------------------------------------------
-# function: Test ToC propagation.
-
-use strict;
-use Test;
-
-BEGIN { plan tests => 10; }
-
-use HTML::Toc;
-use HTML::TocGenerator;
-use HTML::TocInsertor;
-
-my ($output, $content, $filename);
-my $toc          = HTML::Toc->new;
-my $tocGenerator = HTML::TocGenerator->new;
-my $tocInsertor  = HTML::TocInsertor->new;
-
-$toc->setOptions({
-	'doLinkToToken'  => 0,
-	'levelIndent'    => 0,
-	'insertionPoint' => 'before <h1>',
-	'header'         => '',
-	'footer'         => '',
-});
-
-
-BEGIN {
-		# Create test file
-	$filename = "file$$.htm";
-	die "$filename is already there" if -e $filename;
-	open(FILE, ">$filename") || die "Can't create $filename: $!";
-	print FILE <<'EOT'; close(FILE);
-<h1>Header</h1>
-EOT
-}
-
-
-END {
-		# Remove test file
-	unlink($filename) or warn "Can't unlink $filename: $!";
-}
-
-
-#--- 1. propagate -------------------------------------------------------------
-
-$tocInsertor->insert($toc, "<h1>Header</h1>", {'output' => \$output});
-ok($output, "<ul>\n<li>Header\n</ul><h1>Header</h1>");
-
-
-#--- 2. propagateFile ---------------------------------------------------------
-
-$tocInsertor->insertIntoFile($toc, $filename, {'output' => \$output});
-ok($output, "<ul>\n<li>Header\n</ul><h1>Header</h1>\n");
-
-
-#--- 3. doLinkToToken -----------------------------------------------------
-
-$toc->setOptions({'doLinkToToken' => 1});
-$tocInsertor->insert($toc, "<h1>Header</h1>", {'output' => \$output});
-ok("$output\n", <<'EOT');
-<ul>
-<li><a href=#h-1>Header</a>
-</ul><a name=h-1><h1>Header</h1></a>
-EOT
-
-
-#--- 4. templateAnchorHrefBegin -----------------------------------------------
-
-$toc->setOptions(
-	{'templateAnchorHrefBegin' => '"<$node${file}test${groupId}>"'}
-);
-$tocInsertor->insertIntoFile($toc, $filename, {'output' => \$output});
-ok($output, "<ul>\n<li><1${filename}testh>Header</a>\n</ul><a name=h-1><h1>Header</h1></a>\n");
-$toc->setOptions({'templateAnchorHrefBegin' => undef});
-
-
-#--- 5. templateAnchorNameBegin -----------------------------------------------
-
-$toc->setOptions({
-	'templateAnchorName'      => '"$node$groupId"',
-	'templateAnchorNameBegin' => '"<$anchorName>"'
-});
-$tocInsertor->insert($toc, "<h1>Header</h1>", {'output' => \$output});
-ok($output, "<ul>\n<li><a href=#1h>Header</a>\n</ul><1h><h1>Header</h1></a>");
-$toc->setOptions({'templateAnchorName' => undef});
-
-
-#--- 6. templateAnchorName function -------------------------------------------
-
-sub AssembleAnchorName {
-		# Get arguments
-	my ($aFile, $aGroupId, $aLevel, $aNode) = @_;
-		# Return value
-	return $aFile . $aGroupId . $aLevel . $aNode;
-}  # AssembleAnchorName()
-
-	# Set options
-$toc->setOptions({'templateAnchorNameBegin' => \&AssembleAnchorName});
-	# Propagate ToC
-$tocInsertor->insert($toc, "<h1>Header</h1>", {'output' => \$output});
-	# Test ToC
-ok($output, "<ul>\n<li><a href=#h-1>Header</a>\n</ul>h11<h1>Header</h1></a>");
-	# Restore options
-$toc->setOptions({'templateAnchorNameBegin' => undef});
-
-
-#--- 7. doNumberToken --------------------------------------------------------
-
-	# Set options
-$toc->setOptions({'doNumberToken' => 1});
-$tocInsertor->insert($toc, "<h1>Header</h1>", {'output' => \$output});
-ok("$output\n", <<'EOT');
-<ul>
-<li><a href=#h-1>Header</a>
-</ul><a name=h-1><h1>1 &nbsp;Header</h1></a>
-EOT
-	# Reset options
-$toc->setOptions({
-	'templateTokenNumber' => undef,
-	'doNumberToken'      => 0
-});
-
-
-#--- 8. templateTokenNumber ---------------------------------------------------
-
-	# Set options
-$toc->setOptions({
-	'templateTokenNumber' => '"-$node-"',
-	'doNumberToken'      => 1
-});
-	# Propagate ToC
-$tocInsertor->insert($toc, "<h1>Header</h1>", {'output' => \$output});
-	# Test ToC
-ok("$output\n", <<'EOT');
-<ul>
-<li><a href=#h-1>Header</a>
-</ul><a name=h-1><h1>-1-Header</h1></a>
-EOT
-	# Reset options
-$toc->setOptions({
-	'doNumberToken'      => 0,
-	'templateTokenNumber' => undef
-});
-
-
-#--- 9. numberingStyle --------------------------------------------------------
-
-	# Set options
-$toc->setOptions({
-	'doNumberToken' => 1,
-	'tokenToToc' => [{
-		'level' => 1,
-		'tokenBegin' => '<h1>',
-		'numberingStyle' => 'lower-alpha'
-	}]
-});
-	# Propagate ToC
-$tocInsertor->insert($toc, "<h1>Header</h1>", {'output' => \$output});
-	# Test ToC
-ok("$output\n", <<'EOT');
-<ul>
-<li><a href=#h-a>Header</a>
-</ul><a name=h-a><h1>a &nbsp;Header</h1></a>
-EOT
-	# Reset options
-$toc->setOptions({
-	'doNumberToken' => 0,
-	'tokenToToc' => undef,
-});
-
-
-#--- 10. declaration pass through ---------------------------------------------
-
-$tocInsertor->insert($toc, '<! DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN"><h1>Header</h1>', {'output' => \$output});
-	# Test ToC
-ok($output, '<! DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN"><h1>Header</h1>');

examples/includes/HTML-Toc-0.91/t/siteMap.t

@@ -1,97 +0,0 @@
-#--- manual.t -----------------------------------------------------------------
-# function: Test HTML::ToC generating a manual.
-
-use strict;
-use Test;
-
-BEGIN { plan tests => 1; }
-
-use Data::Dumper;
-use File::Find;
-use HTML::Toc;
-use HTML::TocGenerator;
-use HTML::TocInsertor;
-use HTML::TocUpdator;
-
-
-	# Create objects
-my $toc          = HTML::Toc->new();
-my $tocGenerator = HTML::TocGenerator->new();
-my @fileList;
-
-
-#--- TestSiteMap() ------------------------------------------------------------
-# function: Test specifying numbered list.
-
-sub TestSiteMap {
-		# Set ToC options
-	$toc->setOptions({
-		'doLinkToFile'       => 1,
-		'templateAnchorName' => '""',
-		'templateAnchorHref' => '"<a href=$file"."#".$groupId.$level.">"',
-		'doLinkTocToToken'   => 1,
-		'tokenToToc'         => [{
-			'groupId'         => 'dir',
-			'level'           => 1,
-			'tokenBegin'      => '<title>',
-			'tokenEnd'        => '</title>',
-			'fileSpec'        => '\./[^/]+$'
-		}, {
-			'groupId'         => 'dir',
-			'level'           => 2,
-			'tokenBegin'      => '<title>',
-			'tokenEnd'        => '</title>',
-			'fileSpec'        => '\./[^/]+?/[^/]+$'
-		}, {
-			'groupId'         => 'dir',
-			'level'           => 3,
-			'tokenBegin'      => '<title>',
-			'tokenEnd'        => '</title>',
-			'fileSpec'        => '\./[^/]+?/[^/]+?/[^/]+$'
-		}]
-	});
-		# Change current directory
-	chdir("t/SiteMap");
-		# Find files, filling 'fileList'
-	find({wanted => \&WantedSiteMap, no_chdir => 1}, '.');
-		# Generate ToC of case-insensitively sorted file list
-	$tocGenerator->extendFromFile(
-		$toc, [sort {uc($a) cmp uc($b)} @fileList]
-	);
-		# Restore current directory
-	chdir("../..");
-		# Test ToC
-	ok($toc->format(), <<EOT);
-
-<!-- Table of Contents generated by Perl - HTML::Toc -->
-<ul>
-   <li><a href=./index.htm#>Main</a>
-   <ul>
-      <li><a href=./SubDir1/index.htm#>Sub1</a>
-      <ul>
-         <li><a href=./SubDir1/SubSubDir1/index.htm#>SubSub1</a>
-      </ul>
-      <li><a href=./SubDir2/index.htm#>Sub2</a>
-      <ul>
-         <li><a href=./SubDir2/SubSubDir1/index.htm#>SubSub1</a>
-         <li><a href=./SubDir2/SubSubDir2/index.htm#>SubSub2</a>
-      </ul>
-      <li><a href=./SubDir3/index.htm#>Sub3</a>
-   </ul>
-</ul>
-<!-- End of generated Table of Contents -->
-EOT
-}  # TestSiteMap()
-
-
-#--- WantedSiteMap() ----------------------------------------------------------
-# function: 'Wanted' function, used by File::Find of 'TestSiteMap()'.
-
-sub WantedSiteMap {
-		# Add file to 'fileList' if extension matches '.htm'
-	push (@fileList, $File::Find::name) if (m/\.htm$/);
-} # WantedSiteMap()
-
-
-	# Test site map
-TestSiteMap();

examples/includes/HTML-Toc-0.91/t/update.t

@@ -1,114 +0,0 @@
-#--- update.t -----------------------------------------------------------------
-# function: Test ToC updating.
-
-use strict;
-use Test;
-
-BEGIN { plan tests => 6; }
-
-use HTML::Toc;
-use HTML::TocUpdator;
-
-my ($output, $output2, $content, $filename);
-my $toc         = HTML::Toc->new;
-my $tocUpdator  = HTML::TocUpdator->new;
-
-$toc->setOptions({
-	'doLinkToToken'  => 1,
-	'doNumberToken'  => 1,
-	'levelIndent'    => 0,
-	'insertionPoint' => 'before <h1>',
-	'header'         => '',
-	'footer'         => '',
-});
-
-
-BEGIN {
-		# Create test file
-	$filename = "file$$.htm";
-	die "$filename is already there" if -e $filename;
-	open(FILE, ">$filename") || die "Can't create $filename: $!";
-	print FILE <<'EOT'; close(FILE);
-<h1>Header</h1>
-EOT
-}
-
-
-END {
-		# Remove test file
-	unlink($filename) or warn "Can't unlink $filename: $!";
-}
-
-
-#--- 1. update ----------------------------------------------------------------
-
-$tocUpdator->update($toc, "<h1>Header</h1>", {'output' => \$output});
-ok("$output\n", <<'EOT');
-<!-- #BeginToc --><ul>
-<li><a href=#h-1>Header</a>
-</ul><!-- #EndToc --><!-- #BeginTocAnchorNameBegin --><a name=h-1><!-- #EndTocAnchorNameBegin --><h1><!-- #BeginTocNumber -->1 &nbsp;<!-- #EndTocNumber -->Header</h1><!-- #BeginTocAnchorNameEnd --></a><!-- #EndTocAnchorNameEnd -->
-EOT
-
-#--- 2. updateFile ------------------------------------------------------------
-
-$tocUpdator->updateFile($toc, $filename, {'output' => \$output});
-	open(FILE, ">a.out1") || die "Can't create a.out1: $!";
-	print FILE $output; close(FILE);
-$output2 = <<'EOT';
-<!-- #BeginToc --><ul>
-<li><a href=#h-1>Header</a>
-</ul><!-- #EndToc --><!-- #BeginTocAnchorNameBegin --><a name=h-1><!-- #EndTocAnchorNameBegin --><h1><!-- #BeginTocNumber -->1 &nbsp;<!-- #EndTocNumber -->Header</h1><!-- #BeginTocAnchorNameEnd --></a><!-- #EndTocAnchorNameEnd -->
-EOT
-	open(FILE, ">a.out2") || die "Can't create a.out2: $!";
-	print FILE $output2; close(FILE);
-ok($output, $output2);
-
-
-#--- 3. insert ----------------------------------------------------------------
-
-$tocUpdator->insert($toc, "<h1>Header</h1>", {'output' => \$output});
-ok("$output\n", <<'EOT');
-<!-- #BeginToc --><ul>
-<li><a href=#h-1>Header</a>
-</ul><!-- #EndToc --><!-- #BeginTocAnchorNameBegin --><a name=h-1><!-- #EndTocAnchorNameBegin --><h1><!-- #BeginTocNumber -->1 &nbsp;<!-- #EndTocNumber -->Header</h1><!-- #BeginTocAnchorNameEnd --></a><!-- #EndTocAnchorNameEnd -->
-EOT
-
-#--- 4. insertIntoFile --------------------------------------------------------
-
-$tocUpdator->insertIntoFile($toc, $filename, {'output' => \$output});
-ok($output, <<'EOT');
-<!-- #BeginToc --><ul>
-<li><a href=#h-1>Header</a>
-</ul><!-- #EndToc --><!-- #BeginTocAnchorNameBegin --><a name=h-1><!-- #EndTocAnchorNameBegin --><h1><!-- #BeginTocNumber -->1 &nbsp;<!-- #EndTocNumber -->Header</h1><!-- #BeginTocAnchorNameEnd --></a><!-- #EndTocAnchorNameEnd -->
-EOT
-
-
-#--- 5. update twice ----------------------------------------------------------
-
-$tocUpdator->update($toc, "<h1>Header</h1>", {'output' => \$output});
-$tocUpdator->update($toc, $output, {'output' => \$output2});
-ok("$output\n", <<'EOT');
-<!-- #BeginToc --><ul>
-<li><a href=#h-1>Header</a>
-</ul><!-- #EndToc --><!-- #BeginTocAnchorNameBegin --><a name=h-1><!-- #EndTocAnchorNameBegin --><h1><!-- #BeginTocNumber -->1 &nbsp;<!-- #EndTocNumber -->Header</h1><!-- #BeginTocAnchorNameEnd --></a><!-- #EndTocAnchorNameEnd -->
-EOT
-
-
-#--- 6. tokens update begin & end ---------------------------------------------
-
-$toc->setOptions({
-	'tokenUpdateBeginOfAnchorNameBegin' => '<tocAnchorNameBegin>',
-	'tokenUpdateEndOfAnchorNameBegin'   => '</tocAnchorNameBegin>',
-	'tokenUpdateBeginOfAnchorNameEnd'   => '<tocAnchorNameEnd>',
-	'tokenUpdateEndOfAnchorNameEnd'     => '</tocAnchorNameEnd>',
-	'tokenUpdateBeginNumber'            => '<tocNumber>',
-	'tokenUpdateEndNumber'              => '</tocNumber>',
-	'tokenUpdateBeginToc'               => '<toc>',
-	'tokenUpdateEndToc',                => '</toc>'
-});
-$tocUpdator->update($toc, "<h1>Header</h1>", {'output' => \$output});
-ok("$output\n", <<'EOT');
-<toc><ul>
-<li><a href=#h-1>Header</a>
-</ul></toc><tocAnchorNameBegin><a name=h-1></tocAnchorNameBegin><h1><tocNumber>1 &nbsp;</tocNumber>Header</h1><tocAnchorNameEnd></a></tocAnchorNameEnd>
-EOT

examples/includes/PHP-Markdown-Extra-1.2.3/License.text

@@ -1,36 +0,0 @@
-PHP Markdown & Extra
-Copyright (c) 2004-2008 Michel Fortin  
-<http://www.michelf.com/>  
-All rights reserved.
-
-Based on Markdown  
-Copyright (c) 2003-2006 John Gruber   
-<http://daringfireball.net/>   
-All rights reserved.
-
-Redistribution and use in source and binary forms, with or without
-modification, are permitted provided that the following conditions are
-met:
-
-* Redistributions of source code must retain the above copyright notice,
-  this list of conditions and the following disclaimer.
-
-* Redistributions in binary form must reproduce the above copyright
-  notice, this list of conditions and the following disclaimer in the
-  documentation and/or other materials provided with the distribution.
-
-* Neither the name "Markdown" nor the names of its contributors may
-  be used to endorse or promote products derived from this software
-  without specific prior written permission.
-
-This software is provided by the copyright holders and contributors "as
-is" and any express or implied warranties, including, but not limited
-to, the implied warranties of merchantability and fitness for a
-particular purpose are disclaimed. In no event shall the copyright owner
-or contributors be liable for any direct, indirect, incidental, special,
-exemplary, or consequential damages (including, but not limited to,
-procurement of substitute goods or services; loss of use, data, or
-profits; or business interruption) however caused and on any theory of
-liability, whether in contract, strict liability, or tort (including
-negligence or otherwise) arising in any way out of the use of this
-software, even if advised of the possibility of such damage.

examples/includes/PHP-Markdown-Extra-1.2.3/PHP Markdown Extra Readme.text

@@ -1,731 +0,0 @@
-PHP Markdown Extra
-==================
-
-Version 1.2.3 - Wed 31 Dec 2008
-
-by Michel Fortin
-<http://www.michelf.com/>
-
-based on Markdown by John Gruber  
-<http://daringfireball.net/>
-
-
-Introduction
-------------
-
-This is a special version of PHP Markdown with extra features. See
-<http://www.michelf.com/projects/php-markdown/extra/> for details.
-
-Markdown is a text-to-HTML conversion tool for web writers. Markdown
-allows you to write using an easy-to-read, easy-to-write plain text
-format, then convert it to structurally valid XHTML (or HTML).
-
-"Markdown" is two things: a plain text markup syntax, and a software 
-tool, written in Perl, that converts the plain text markup to HTML. 
-PHP Markdown is a port to PHP of the original Markdown program by 
-John Gruber.
-
-PHP Markdown can work as a plug-in for WordPress and bBlog, as a 
-modifier for the Smarty templating engine, or as a remplacement for
-textile formatting in any software that support textile.
-
-Full documentation of Markdown's syntax is available on John's 
-Markdown page: <http://daringfireball.net/projects/markdown/>
-
-
-Installation and Requirement
-----------------------------
-
-PHP Markdown requires PHP version 4.0.5 or later.
-
-
-### WordPress ###
-
-PHP Markdown works with [WordPress][wp], version 1.2 or later.
-
- [wp]: http://wordpress.org/
-
-1.  To use PHP Markdown with WordPress, place the "makrdown.php" file 
-    in the "plugins" folder. This folder is located inside 
-    "wp-content" at the root of your site:
-
-        (site home)/wp-content/plugins/
-
-2.  Activate the plugin with the administrative interface of 
-    WordPress. In the "Plugins" section you will now find Markdown. 
-    To activate the plugin, click on the "Activate" button on the 
-    same line than Markdown. Your entries will now be formatted by 
-    PHP Markdown.
-
-3.  To post Markdown content, you'll first have to disable the 
-	"visual" editor in the User section of WordPress.
-
-You can configure PHP Markdown to not apply to the comments on your 
-WordPress weblog. See the "Configuration" section below.
-
-It is not possible at this time to apply a different set of 
-filters to different entries. All your entries will be formated by 
-PHP Markdown. This is a limitation of WordPress. If your old entries 
-are written in HTML (as opposed to another formatting syntax, like 
-Textile), they'll probably stay fine after installing Markdown.
-
-
-### bBlog ###
-
-PHP Markdown also works with [bBlog][bb].
-
- [bb]: http://www.bblog.com/
-
-To use PHP Markdown with bBlog, rename "markdown.php" to 
-"modifier.markdown.php" and place the file in the "bBlog_plugins" 
-folder. This folder is located inside the "bblog" directory of 
-your site, like this:
-
-        (site home)/bblog/bBlog_plugins/modifier.markdown.php
-
-Select "Markdown" as the "Entry Modifier" when you post a new 
-entry. This setting will only apply to the entry you are editing.
-
-
-### Replacing Textile in TextPattern ###
-
-[TextPattern][tp] use [Textile][tx] to format your text. You can 
-replace Textile by Markdown in TextPattern without having to change
-any code by using the *Texitle Compatibility Mode*. This may work 
-with other software that expect Textile too.
-
- [tx]: http://www.textism.com/tools/textile/
- [tp]: http://www.textpattern.com/
-
-1.  Rename the "markdown.php" file to "classTextile.php". This will
-	make PHP Markdown behave as if it was the actual Textile parser.
-
-2.  Replace the "classTextile.php" file TextPattern installed in your
-	web directory. It can be found in the "lib" directory:
-
-		(site home)/textpattern/lib/
-
-Contrary to Textile, Markdown does not convert quotes to curly ones 
-and does not convert multiple hyphens (`--` and `---`) into en- and 
-em-dashes. If you use PHP Markdown in Textile Compatibility Mode, you 
-can solve this problem by installing the "smartypants.php" file from 
-[PHP SmartyPants][psp] beside the "classTextile.php" file. The Textile 
-Compatibility Mode function will use SmartyPants automatically without 
-further modification.
-
- [psp]: http://www.michelf.com/projects/php-smartypants/
-
-
-### In Your Own Programs ###
-
-You can use PHP Markdown easily in your current PHP program. Simply 
-include the file and then call the Markdown function on the text you 
-want to convert:
-
-    include_once "markdown.php";
-    $my_html = Markdown($my_text);
-
-If you wish to use PHP Markdown with another text filter function 
-built to parse HTML, you should filter the text *after* the Markdown
-function call. This is an example with [PHP SmartyPants][psp]:
-
-    $my_html = SmartyPants(Markdown($my_text));
-
-
-### With Smarty ###
-
-If your program use the [Smarty][sm] template engine, PHP Markdown 
-can now be used as a modifier for your templates. Rename "markdown.php" 
-to "modifier.markdown.php" and put it in your smarty plugins folder.
-
-  [sm]: http://smarty.php.net/
-
-If you are using MovableType 3.1 or later, the Smarty plugin folder is 
-located at `(MT CGI root)/php/extlib/smarty/plugins`. This will allow 
-Markdown to work on dynamic pages.
-
-
-### Updating Markdown in Other Programs ###
-
-Many web applications now ship with PHP Markdown, or have plugins to 
-perform the conversion to HTML. You can update PHP Markdown -- or 
-replace it with PHP Markdown Extra -- in many of these programs by 
-swapping the old "markdown.php" file for the new one.
-
-Here is a short non-exhaustive list of some programs and where they 
-hide the "markdown.php" file.
-
-| Program   | Path to Markdown
-| -------   | ----------------
-| [Pivot][] | `(site home)/pivot/includes/markdown/`
-
-If you're unsure if you can do this with your application, ask the 
-developer, or wait for the developer to update his application or 
-plugin with the new version of PHP Markdown.
-
- [Pivot]: http://pivotlog.net/
-
-
-Configuration
--------------
-
-By default, PHP Markdown produces XHTML output for tags with empty 
-elements. E.g.:
-
-    <br />
-
-Markdown can be configured to produce HTML-style tags; e.g.:
-
-    <br>
-
-To do this, you  must edit the "MARKDOWN_EMPTY_ELEMENT_SUFFIX" 
-definition below the "Global default settings" header at the start of 
-the "markdown.php" file.
-
-
-### WordPress-Specific Settings ###
-
-By default, the Markdown plugin applies to both posts and comments on 
-your WordPress weblog. To deactivate one or the other, edit the 
-`MARKDOWN_WP_POSTS` or `MARKDOWN_WP_COMMENTS` definitions under the 
-"WordPress settings" header at the start of the "markdown.php" file.
-
-
-Bugs
-----
-
-To file bug reports please send email to:
-<michel.fortin@michelf.com>
-
-Please include with your report: (1) the example input; (2) the output you
-expected; (3) the output PHP Markdown actually produced.
-
-
-Version History
----------------
-
-Extra 1.2.3 (31 Dec 2008):
-
-*	In WordPress pages featuring more than one post, footnote id prefixes are 
-	now automatically applied with the current post ID to avoid clashes
-	between footnotes belonging to different posts.
-
-*	Fix for a bug introduced in Extra 1.2 where block-level HTML tags where 
-	not detected correctly, thus the addition of erroneous `<p>` tags and
-	interpretation of their content as Markdown-formatted instead of
-	HTML-formatted.
-
-
-Extra 1.2.2 (21 Jun 2008):
-
-*	Fixed a problem where abbreviation definitions, footnote
-	definitions and link references were stripped inside
-	fenced code blocks.
-
-*	Fixed a bug where characters such as `"` in abbreviation
-	definitions weren't properly encoded to HTML entities.
-
-*	Fixed a bug where double quotes `"` were not correctly encoded
-	as HTML entities when used inside a footnote reference id.
-
-
-1.0.1m (21 Jun 2008):
-
-*	Lists can now have empty items.
-
-*	Rewrote the emphasis and strong emphasis parser to fix some issues
-	with odly placed and overlong markers.
-
-
-Extra 1.2.1 (27 May 2008):
-
-*	Fixed a problem where Markdown headers and horizontal rules were
-	transformed into their HTML equivalent inside fenced code blocks.
-
-
-Extra 1.2 (11 May 2008):
-
-*	Added fenced code block syntax which don't require indentation
-	and can start and end with blank lines. A fenced code block
-	starts with a line of consecutive tilde (~) and ends on the
-	next line with the same number of consecutive tilde. Here's an
-	example:
-	
-	    ~~~~~~~~~~~~
-		Hello World!
-		~~~~~~~~~~~~
-
-*	Rewrote parts of the HTML block parser to better accomodate
-	fenced code blocks.
-
-*	Footnotes may now be referenced from within another footnote.
-
-*	Added programatically-settable parser property `predef_attr` for 
-	predefined attribute definitions.
-
-*	Fixed an issue where an indented code block preceded by a blank
-	line containing some other whitespace would confuse the HTML 
-	block parser into creating an HTML block when it should have 
-	been code.
-
-
-1.0.1l (11 May 2008):
-
-*	Now removing the UTF-8 BOM at the start of a document, if present.
-
-*	Now accepting capitalized URI schemes (such as HTTP:) in automatic
-	links, such as `<HTTP://EXAMPLE.COM/>`.
-
-*	Fixed a problem where `<hr@example.com>` was seen as a horizontal
-	rule instead of an automatic link.
-
-*	Fixed an issue where some characters in Markdown-generated HTML
-	attributes weren't properly escaped with entities.
-
-*	Fix for code blocks as first element of a list item. Previously,
-	this didn't create any code block for item 2:
-	
-		*   Item 1 (regular paragraph)
-		
-		*       Item 2 (code block)
-
-*	A code block starting on the second line of a document wasn't seen
-	as a code block. This has been fixed.
-	
-*	Added programatically-settable parser properties `predef_urls` and 
-	`predef_titles` for predefined URLs and titles for reference-style 
-	links. To use this, your PHP code must call the parser this way:
-	
-		$parser = new Markdwon_Parser;
-		$parser->predef_urls = array('linkref' => 'http://example.com');
-		$html = $parser->transform($text);
-	
-	You can then use the URL as a normal link reference:
-	
-		[my link][linkref]	
-		[my link][linkRef]
-		
-	Reference names in the parser properties *must* be lowercase.
-	Reference names in the Markdown source may have any case.
-
-*	Added `setup` and `teardown` methods which can be used by subclassers
-	as hook points to arrange the state of some parser variables before and 
-	after parsing.
-
-
-Extra 1.1.7 (26 Sep 2007):
-
-1.0.1k (26 Sep 2007):
-
-*	Fixed a problem introduced in 1.0.1i where three or more identical
-	uppercase letters, as well as a few other symbols, would trigger
-	a horizontal line.
-
-
-Extra 1.1.6 (4 Sep 2007):
-
-1.0.1j (4 Sep 2007):
-
-*	Fixed a problem introduced in 1.0.1i where the closing `code` and 
-	`pre` tags at the end of a code block were appearing in the wrong 
-	order.
-
-*	Overriding configuration settings by defining constants from an 
-	external before markdown.php is included is now possible without 
-	producing a PHP warning.
-
-
-Extra 1.1.5 (31 Aug 2007):
-
-1.0.1i (31 Aug 2007):
-
-*	Fixed a problem where an escaped backslash before a code span 
-	would prevent the code span from being created. This should now
-	work as expected:
-	
-		Litteral backslash: \\`code span`
-
-*	Overall speed improvements, especially with long documents.
-
-
-Extra 1.1.4 (3 Aug 2007):
-
-1.0.1h (3 Aug 2007):
-
-*	Added two properties (`no_markup` and `no_entities`) to the parser 
-	allowing HTML tags and entities to be disabled.
-
-*	Fix for a problem introduced in 1.0.1g where posting comments in 
-	WordPress would trigger PHP warnings and cause some markup to be 
-	incorrectly filtered by the kses filter in WordPress.
-
-
-Extra 1.1.3 (3 Jul 2007):
-
-*	Fixed a performance problem when parsing some invalid HTML as an HTML 
-	block which was resulting in too much recusion and a segmentation fault 
-	for long documents.
-
-*	The markdown="" attribute now accepts unquoted values.
-
-*	Fixed an issue where underscore-emphasis didn't work when applied on the 
-	first or the last word of an element having the markdown="1" or 
-	markdown="span" attribute set unless there was some surrounding whitespace.
-	This didn't work:
-	
-		<p markdown="1">_Hello_ _world_</p>
-	
-	Now it does produce emphasis as expected.
-
-*	Fixed an issue preventing footnotes from working when the parser's 
-	footnote id prefix variable (fn_id_prefix) is not empty.
-
-*	Fixed a performance problem where the regular expression for strong 
-	emphasis introduced in version 1.1 could sometime be long to process, 
-	give slightly wrong results, and in some circumstances could remove 
-	entirely the content for a whole paragraph.
-
-*	Fixed an issue were abbreviations tags could be incorrectly added 
-	inside URLs and title of links.
-
-*	Placing footnote markers inside a link, resulting in two nested links, is 
-	no longer allowed.
-
-
-1.0.1g (3 Jul 2007):
-
-*	Fix for PHP 5 compiled without the mbstring module. Previous fix to 
-	calculate the length of UTF-8 strings in `detab` when `mb_strlen` is 
-	not available was only working with PHP 4.
-
-*	Fixed a problem with WordPress 2.x where full-content posts in RSS feeds 
-	were not processed correctly by Markdown.
-
-*	Now supports URLs containing literal parentheses for inline links 
-	and images, such as:
-
-		[WIMP](http://en.wikipedia.org/wiki/WIMP_(computing))
-
-	Such parentheses may be arbitrarily nested, but must be
-	balanced. Unbalenced parentheses are allowed however when the URL 
-	when escaped or when the URL is enclosed in angle brakets `<>`.
-
-*	Fixed a performance problem where the regular expression for strong 
-	emphasis introduced in version 1.0.1d could sometime be long to process, 
-	give slightly wrong results, and in some circumstances could remove 
-	entirely the content for a whole paragraph.
-
-*	Some change in version 1.0.1d made possible the incorrect nesting of 
-	anchors within each other. This is now fixed.
-
-*	Fixed a rare issue where certain MD5 hashes in the content could
-	be changed to their corresponding text. For instance, this:
-
-		The MD5 value for "+" is "26b17225b626fb9238849fd60eabdf60".
-	
-	was incorrectly changed to this in previous versions of PHP Markdown:
-
-		<p>The MD5 value for "+" is "+".</p>
-
-*	Now convert escaped characters to their numeric character 
-	references equivalent.
-	
-	This fix an integration issue with SmartyPants and backslash escapes. 
-	Since Markdown and SmartyPants have some escapable characters in common, 
-	it was sometime necessary to escape them twice. Previously, two 
-	backslashes were sometime required to prevent Markdown from "eating" the 
-	backslash before SmartyPants sees it:
-	
-		Here are two hyphens: \\--
-	
-	Now, only one backslash will do:
-	
-		Here are two hyphens: \--
-
-
-Extra 1.1.2 (7 Feb 2007)
-
-*	Fixed an issue where headers preceded too closely by a paragraph 
-	(with no blank line separating them) where put inside the paragraph.
-
-*	Added the missing TextileRestricted method that was added to regular
-	PHP Markdown since 1.0.1d but which I forgot to add to Extra.
-
-
-1.0.1f (7 Feb 2007):
-
-*	Fixed an issue with WordPress where manually-entered excerpts, but 
-	not the auto-generated ones, would contain nested paragraphs.
-
-*	Fixed an issue introduced in 1.0.1d where headers and blockquotes 
-	preceded too closely by a paragraph (not separated by a blank line) 
-	where incorrectly put inside the paragraph.
-
-*	Fixed an issue introduced in 1.0.1d in the tokenizeHTML method where 
-	two consecutive code spans would be merged into one when together they 
-	form a valid tag in a multiline paragraph.
-
-*	Fixed an long-prevailing issue where blank lines in code blocks would 
-	be doubled when the code block is in a list item.
-	
-	This was due to the list processing functions relying on artificially 
-	doubled blank lines to correctly determine when list items should 
-	contain block-level content. The list item processing model was thus 
-	changed to avoid the need for double blank lines.
-
-*	Fixed an issue with `<% asp-style %>` instructions used as inline 
-	content where the opening `<` was encoded as `&lt;`.
-
-*	Fixed a parse error occuring when PHP is configured to accept 
-	ASP-style delimiters as boundaries for PHP scripts.
-
-*	Fixed a bug introduced in 1.0.1d where underscores in automatic links
-	got swapped with emphasis tags.
-
-
-Extra 1.1.1 (28 Dec 2006)
-
-*	Fixed a problem where whitespace at the end of the line of an atx-style
-	header would cause tailing `#` to appear as part of the header's content.
-	This was caused by a small error in the regex that handles the definition
-	for the id attribute in PHP Markdown Extra.
-
-*	Fixed a problem where empty abbreviations definitions would eat the 
-	following line as its definition.
-
-*	Fixed an issue with calling the Markdown parser repetitivly with text 
-	containing footnotes. The footnote hashes were not reinitialized properly.
-
-
-1.0.1e (28 Dec 2006)
-
-*	Added support for internationalized domain names for email addresses in 
-	automatic link. Improved the speed at which email addresses are converted 
-	to entities. Thanks to Milian Wolff for his optimisations.
-
-*	Made deterministic the conversion to entities of email addresses in 
-	automatic links. This means that a given email address will always be 
-	encoded the same way.
-
-*	PHP Markdown will now use its own function to calculate the length of an 
-	UTF-8 string in `detab` when `mb_strlen` is not available instead of 
-	giving a fatal error.
-
-
-Extra 1.1 (1 Dec 2006)
-
-*	Added a syntax for footnotes.
-
-*	Added an experimental syntax to define abbreviations.
-
-
-1.0.1d (1 Dec 2006)
-
-*   Fixed a bug where inline images always had an empty title attribute. The 
-	title attribute is now present only when explicitly defined.
-
-*	Link references definitions can now have an empty title, previously if the 
-	title was defined but left empty the link definition was ignored. This can 
-	be useful if you want an empty title attribute in images to hide the 
-	tooltip in Internet Explorer.
-
-*	Made `detab` aware of UTF-8 characters. UTF-8 multi-byte sequences are now 
-	correctly mapped to one character instead of the number of bytes.
-
-*	Fixed a small bug with WordPress where WordPress' default filter `wpautop`
-	was not properly deactivated on comment text, resulting in hard line breaks
-	where Markdown do not prescribes them.
-
-*	Added a `TextileRestrited` method to the textile compatibility mode. There
-	is no restriction however, as Markdown does not have a restricted mode at 
-	this point. This should make PHP Markdown work again in the latest 
-	versions of TextPattern.
-
-*   Converted PHP Markdown to a object-oriented design.
-
-*	Changed span and block gamut methods so that they loop over a 
-	customizable list of methods. This makes subclassing the parser a more 
-	interesting option for creating syntax extensions.
-
-*	Also added a "document" gamut loop which can be used to hook document-level 
-	methods (like for striping link definitions).
-
-*	Changed all methods which were inserting HTML code so that they now return 
-	a hashed representation of the code. New methods `hashSpan` and `hashBlock`
-	are used to hash respectivly span- and block-level generated content. This 
-	has a couple of significant effects:
-	
-	1.	It prevents invalid nesting of Markdown-generated elements which 
-	    could occur occuring with constructs like `*something [link*][1]`.
-	2.	It prevents problems occuring with deeply nested lists on which 
-	    paragraphs were ill-formed.
-	3.	It removes the need to call `hashHTMLBlocks` twice during the the 
-		block gamut.
-	
-	Hashes are turned back to HTML prior output.
-
-*	Made the block-level HTML parser smarter using a specially-crafted regular 
-	expression capable of handling nested tags.
-
-*	Solved backtick issues in tag attributes by rewriting the HTML tokenizer to 
-	be aware of code spans. All these lines should work correctly now:
-	
-		<span attr='`ticks`'>bar</span>
-		<span attr='``double ticks``'>bar</span>
-		`<test a="` content of attribute `">`
-
-*	Changed the parsing of HTML comments to match simply from `<!--` to `-->` 
-	instead using of the more complicated SGML-style rule with paired `--`.
-	This is how most browsers parse comments and how XML defines them too.
-
-*	`<address>` has been added to the list of block-level elements and is now
-	treated as an HTML block instead of being wrapped within paragraph tags.
-
-*	Now only trim trailing newlines from code blocks, instead of trimming
-	all trailing whitespace characters.
-
-*	Fixed bug where this:
-
-		[text](http://m.com "title" )
-		
-	wasn't working as expected, because the parser wasn't allowing for spaces
-	before the closing paren.
-
-*	Filthy hack to support markdown='1' in div tags.
-
-*	_DoAutoLinks() now supports the 'dict://' URL scheme.
-
-*	PHP- and ASP-style processor instructions are now protected as
-	raw HTML blocks.
-
-		<? ... ?>
-		<% ... %>
-
-*	Fix for escaped backticks still triggering code spans:
-
-		There are two raw backticks here: \` and here: \`, not a code span
-
-
-Extra 1.0 - 5 September 2005
-
-*   Added support for setting the id attributes for headers like this:
-	
-        Header 1            {#header1}
-        ========
-	
-        ## Header 2 ##      {#header2}
-	
-    This only work only for headers for now.
-
-*   Tables will now work correctly as the first element of a definition 
-    list. For example, this input:
-
-        Term
-
-        :   Header  | Header
-            ------- | -------
-            Cell    | Cell
-		    
-    used to produce no definition list and a table where the first 
-    header was named ": Header". This is now fixed.
-
-*   Fix for a problem where a paragraph following a table was not 
-    placed between `<p>` tags.
-
-
-Extra 1.0b4 - 1 August 2005
-
-*   Fixed some issues where whitespace around HTML blocks were trigging
-    empty paragraph tags.
-
-*   Fixed an HTML block parsing issue that would cause a block element 
-    following a code span or block with unmatched opening bracket to be
-    placed inside a paragraph.
-
-*   Removed some PHP notices that could appear when parsing definition
-    lists and tables with PHP notice reporting flag set.
-
-
-Extra 1.0b3 - 29 July 2005
-
-*   Definition lists now require a blank line before each term. Solves
-    an ambiguity where the last line of lazy-indented definitions could 
-    be mistaken by PHP Markdown as a new term in the list.
-
-*   Definition lists now support multiple terms per definition.
-
-*   Some special tags were replaced in the output by their md5 hash 
-    key. Things such as this now work as expected:
-	
-        ## Header <?php echo $number ?> ##
-
-
-Extra 1.0b2 - 26 July 2005
-
-*   Definition lists can now take two or more definitions for one term.
-    This should have been the case before, but a bug prevented this 
-    from working right.
-
-*   Fixed a problem where single column table with a pipe only at the
-    end where not parsed as table. Here is such a table:
-	
-        | header
-        | ------
-        | cell
-
-*   Fixed problems with empty cells in the first column of a table with 
-    no leading pipe, like this one:
-	
-        header | header
-        ------ | ------
-               | cell
-
-*   Code spans containing pipes did not within a table. This is now 
-    fixed by parsing code spans before splitting rows into cells.
-
-*   Added the pipe character to the backlash escape character lists.
-
-Extra 1.0b1 (25 Jun 2005)
-
-*   First public release of PHP Markdown Extra.
-
-
-Copyright and License
----------------------
-
-Copyright (c) 2004-2005 Michel Fortin  
-<http://www.michelf.com/>  
-All rights reserved.
-
-Based on Markdown  
-Copyright (c) 2003-2005 John Gruber   
-<http://daringfireball.net/>   
-All rights reserved.
-
-Redistribution and use in source and binary forms, with or without
-modification, are permitted provided that the following conditions are
-met:
-
-*   Redistributions of source code must retain the above copyright 
-    notice, this list of conditions and the following disclaimer.
-
-*   Redistributions in binary form must reproduce the above copyright
-    notice, this list of conditions and the following disclaimer in the
-    documentation and/or other materials provided with the 
-    distribution.
-
-*   Neither the name "Markdown" nor the names of its contributors may
-    be used to endorse or promote products derived from this software
-    without specific prior written permission.
-
-This software is provided by the copyright holders and contributors "as
-is" and any express or implied warranties, including, but not limited
-to, the implied warranties of merchantability and fitness for a
-particular purpose are disclaimed. In no event shall the copyright owner
-or contributors be liable for any direct, indirect, incidental, special,
-exemplary, or consequential damages (including, but not limited to,
-procurement of substitute goods or services; loss of use, data, or
-profits; or business interruption) however caused and on any theory of
-liability, whether in contract, strict liability, or tort (including
-negligence or otherwise) arising in any way out of the use of this
-software, even if advised of the possibility of such damage.

examples/includes/PHP-SmartyPants-1.5.1e/PHP SmartyPants Readme.txt

@@ -1,394 +0,0 @@
-PHP SmartyPants
-===============
-
-Version 1.5.1e - Fri 9 Dec 2005
-
-by Michel Fortin
-<http://www.michelf.com/>
-
-based on work by John Gruber
-<http://daringfireball.net/>
-
-
-Introduction
-------------
-
-PHP SmartyPants is a port to PHP of the original SmartyPants written
-in Perl by John Gruber.
-
-PHP SmartyPants is a free web publishing plug-in for WordPress and
-Smarty template engine that easily translates plain ASCII punctuation
-characters into "smart" typographic punctuation HTML entities.
-SmartyPants can also be invoked as a standalone PHP function.
-
-SmartyPants can perform the following transformations:
-
-*   Straight quotes (`"` and `'`) into "curly" quote HTML entities
-*   Backtick-style quotes (` ``like this'' `) into "curly" quote HTML
-    entities
-*   Dashes (`--` and `---`) into en- and em-dash entities
-*   Three consecutive dots (`...`) into an ellipsis entity
-
-This means you can write, edit, and save using plain old ASCII straight
-quotes, plain dashes, and plain dots, but your published posts (and
-final HTML output) will appear with smart quotes, em-dashes, and proper
-ellipses.
-
-SmartyPants does not modify characters within `<pre>`, `<code>`,
-`<kbd>`, or `<script>` tag blocks. Typically, these tags are used to
-display text where smart quotes and other "smart punctuation" would not
-be appropriate, such as source code or example markup.
-
-
-### Backslash Escapes ###
-
-If you need to use literal straight quotes (or plain hyphens and
-periods), SmartyPants accepts the following backslash escape sequences
-to force non-smart punctuation. It does so by transforming the escape
-sequence into a decimal-encoded HTML entity:
-
-
-    Escape  Value  Character
-    ------  -----  ---------
-      \\    &#92;    \
-      \"    &#34;    "
-      \'    &#39;    '
-      \.    &#46;    .
-      \-    &#45;    -
-      \`    &#96;    `
-
-
-This is useful, for example, when you want to use straight quotes as
-foot and inch marks:
-
-    6\'2\" tall
-
-translates into:
-
-    6&#39;2&#34; tall
-
-in SmartyPants's HTML output. Which, when rendered by a web browser,
-looks like:
-
-    6'2" tall
-
-
-Installation and Requirement
-----------------------------
-
-PHP SmartyPants require PHP version 4.0.5 or later.
-
-
-### WordPress ###
-
-WordPress already include a filter called "Texturize" with the same
-goal as SmartyPants. You could still find some usefulness to
-PHP SmartyPants if you are not happy enough with the standard algorithm.
-
-PHP SmartyPants works with [WordPress][wp], version 1.2 or later.
-
-[wp]: http://wordpress.org/
-
-1.  To use PHP SmartyPants with WordPress, place the "smartypants.php"
-    file in the "plugins" folder. This folder is hidden inside
-    "wp-content" at the root of your site:
-
-        (site home)/wp-content/plugins/smartypants.php
-
-2.  Activate the plugin with the administrative interface of WordPress.
-    In the "Plugins" section you will now find SmartyPants. To activate
-    the plugin, click on the "Activate" button on the same line than
-    SmartyPants. Your entries will now be filtered by PHP SmartyPants.
-
-Note: It is not possible at this time to apply a different set of
-filters to different entries. All your entries will be filtered by
-PHP SmartyPants if the plugin is active. This is currently a limitation
-of WordPress.
-
-
-### Blosxom ###
-
-SmartyPants works with Blosxom version 2.0 or later.
-
-1.  Rename the "SmartyPants.pl" plug-in to "SmartyPants" (case is
-    important). Movable Type requires plug-ins to have a ".pl"
-    extension; Blosxom forbids it (at least as of this writing).
-
-2.  Copy the "SmartyPants" plug-in file to your Blosxom plug-ins folder.
-    If you're not sure where your Blosxom plug-ins folder is, see the
-    Blosxom documentation for information.
-
-3.  That's it. The entries in your weblog should now automatically have
-    SmartyPants's default transformations applied.
-
-4.  If you wish to configure SmartyPants's behavior, open the
-    "SmartyPants" plug-in, and edit the value of the `$smartypants_attr`
-    configuration variable, located near the top of the script. The
-    default value is 1; see "Options", below, for the full list of
-    supported values.
-
-
-### In your programs ###
-
-You can use PHP SmartyPants easily in your current PHP program. Simply
-include the file and then call the `SmartyPants` function on the text
-you want to convert:
-
-	include_once "smartypants.php";
-	$my_text = SmartyPants($my_text);
-
-
-### With Smarty ###
-
-If your program use the [Smarty][sm] template engine, PHP SmartyPants
-can now be used as a modifier for your templates. Rename
-"smartypants.php" to "modifier.smartypants.php" and put it in your
-smarty plugins folder.
-
-[sm]: http://smarty.php.net/
-
-
-Options and Configuration
--------------------------
-
-Settings are specified by editing the value of the `$smartypants_attr`
-variable in the "smartypants.php" file. For users of the Smarty template
-engine, the "smartypants" modifier also takes an optional attribute where
-you can specify configuration options, like this:
-`{$var|smartypants:1}` (where "1" is the configuration option).
-
-Numeric values are the easiest way to configure SmartyPants's behavior:
-
-"0"
-    Suppress all transformations. (Do nothing.)
-
-"1"
-    Performs default SmartyPants transformations: quotes (including
-    backticks-style), em-dashes, and ellipses. `--` (dash dash) is
-    used to signify an em-dash; there is no support for en-dashes.
-
-"2"
-    Same as smarty_pants="1", except that it uses the old-school
-    typewriter shorthand for dashes: `--` (dash dash) for en-dashes,
-    `---` (dash dash dash) for em-dashes.
-
-"3"
-    Same as smarty_pants="2", but inverts the shorthand for dashes: `--`
-    (dash dash) for em-dashes, and `---` (dash dash dash) for en-dashes.
-
-"-1"
-    Stupefy mode. Reverses the SmartyPants transformation process,
-    turning the HTML entities produced by SmartyPants into their ASCII
-    equivalents. E.g. `&#8220;` is turned into a simple double-quote
-    (`"`), `&#8212;` is turned into two dashes, etc. This is useful if you
-    wish to suppress smart punctuation in specific pages, such as
-    RSS feeds.
-
-The following single-character attribute values can be combined to
-toggle individual transformations from within the smarty_pants
-attribute. For example, to educate normal quotes and em-dashes, but not
-ellipses or backticks-style quotes:
-
-    $smartypants_attr = "qd";
-
-Or inside a Smarty template:
-
-    {$var|smartypants:"qd"}
-
-"q"
-    Educates normal quote characters: (`"`) and (`'`).
-
-"b"
-    Educates ` ``backticks'' ` double quotes.
-
-"B"
-    Educates backticks-style double quotes and ` `single' ` quotes.
-
-"d"
-    Educates em-dashes.
-
-"D"
-    Educates em-dashes and en-dashes, using old-school typewriter
-    shorthand: (dash dash) for en-dashes, (dash dash dash) for
-    em-dashes.
-
-"i"
-    Educates em-dashes and en-dashes, using inverted old-school
-    typewriter shorthand: (dash dash) for em-dashes, (dash dash dash)
-    for en-dashes.
-
-"e"
-    Educates ellipses.
-
-"w"
-    Translates any instance of `&quot;` into a normal double-quote
-    character. This should be of no interest to most people, but of
-    particular interest to anyone who writes their posts using
-    Dreamweaver, as Dreamweaver inexplicably uses this entity to
-    represent a literal double-quote character. SmartyPants only
-    educates normal quotes, not entities (because ordinarily, entities
-    are used for the explicit purpose of representing the specific
-    character they represent). The "w" option must be used in
-    conjunction with one (or both) of the other quote options ("q" or
-    "b"). Thus, if you wish to apply all SmartyPants transformations
-    (quotes, en- and em-dashes, and ellipses) and also translate
-    `&quot;` entities into regular quotes so SmartyPants can educate
-    them, you should pass the following to the smarty_pants attribute:
-
-        $smartypants_attr = "qDew";
-
-    Inside a Smarty template, this will be:
-
-        {$var|smartypants:"qDew"}
-
-
-Caveats
--------
-
-### Why You Might Not Want to Use Smart Quotes in Your Weblog ###
-
-For one thing, you might not care.
-
-Most normal, mentally stable individuals do not take notice of proper
-typographic punctuation. Many design and typography nerds, however,
-break out in a nasty rash when they encounter, say, a restaurant sign
-that uses a straight apostrophe to spell "Joe's".
-
-If you're the sort of person who just doesn't care, you might well want
-to continue not caring. Using straight quotes -- and sticking to the
-7-bit ASCII character set in general -- is certainly a simpler way to
-live.
-
-Even if you *do* care about accurate typography, you still might want to
-think twice before educating the quote characters in your weblog. One
-side effect of publishing curly quote HTML entities is that it makes
-your weblog a bit harder for others to quote from using copy-and-paste.
-What happens is that when someone copies text from your blog, the copied
-text contains the 8-bit curly quote characters (as well as the 8-bit
-characters for em-dashes and ellipses, if you use these options). These
-characters are not standard across different text encoding methods,
-which is why they need to be encoded as HTML entities.
-
-People copying text from your weblog, however, may not notice that
-you're using curly quotes, and they'll go ahead and paste the unencoded
-8-bit characters copied from their browser into an email message or
-their own weblog. When pasted as raw "smart quotes", these characters
-are likely to get mangled beyond recognition.
-
-That said, my own opinion is that any decent text editor or email client
-makes it easy to stupefy smart quote characters into their 7-bit
-equivalents, and I don't consider it my problem if you're using an
-indecent text editor or email client.
-
-### Algorithmic Shortcomings ###
-
-One situation in which quotes will get curled the wrong way is when
-apostrophes are used at the start of leading contractions. For example:
-
-    'Twas the night before Christmas.
-
-In the case above, SmartyPants will turn the apostrophe into an opening
-single-quote, when in fact it should be a closing one. I don't think
-this problem can be solved in the general case -- every word processor
-I've tried gets this wrong as well. In such cases, it's best to use the
-proper HTML entity for closing single-quotes (`&#8217;` or `&rsquo;`) by
-hand.
-
-
-Bugs
-----
-
-To file bug reports or feature requests (other than topics listed in the
-Caveats section above) please send email to:
-
-<michel.fortin@michelf.com>
-
-If the bug involves quotes being curled the wrong way, please send
-example text to illustrate.
-
-
-Version History
----------------
-
-1.5.1e (9 Dec 2005)
-
-*	Corrected a bug that prevented special characters from being
-    escaped.
-
-
-1.5.1d (6 Jun 2005)
-
-*	Correct a small bug in `_TokenizeHTML` where a Doctype declaration
-	was not seen as HTML, making curly quotes inside it.
-
-
-1.5.1c (13 Dec 2004)
-
-*	Changed a regular expression in `_TokenizeHTML` that could lead
-	to a segmentation fault with PHP 4.3.8 on Linux.
-
-
-1.5.1b (6 Sep 2004)
-
-*	Corrected a problem with quotes immediately following a dash
-	with no space between: `Text--"quoted text"--text.`
-
-*	PHP SmartyPants can now be used as a modifier by the Smarty
-	template engine. Rename the file to "modifier.smartypants.php"
-	and put it in your smarty plugins folder.
-
-*	Replaced a lot of spaces characters by tabs, saving about 4 KB.
-
-
-1.5.1a (30 Jun 2004)
-
-*	PHP Markdown and PHP Smartypants now share the same `_TokenizeHTML`
-	function when loaded simultanously.
-
-*	Changed the internals of `_TokenizeHTML` to lower the PHP version
-	requirement to PHP 4.0.5.
-
-
-1.5.1 (6 Jun 2004)
-
-*	Initial release of PHP SmartyPants, based on version 1.5.1 of the
-	original SmartyPants written in Perl.
-
-
-Copyright and License
----------------------
-
-Copyright (c) 2005 Michel Fortin
-<http://www.michelf.com/>
-All rights reserved.
-
-Copyright (c) 2003-2004 John Gruber
-<http://daringfireball.net/>
-All rights reserved.
-
-Redistribution and use in source and binary forms, with or without
-modification, are permitted provided that the following conditions are
-met:
-
-*   Redistributions of source code must retain the above copyright notice,
-    this list of conditions and the following disclaimer.
-
-*   Redistributions in binary form must reproduce the above copyright
-    notice, this list of conditions and the following disclaimer in the
-    documentation and/or other materials provided with the distribution.
-
-*   Neither the name "SmartyPants" nor the names of its contributors may
-    be used to endorse or promote products derived from this software
-    without specific prior written permission.
-
-This software is provided by the copyright holders and contributors "as
-is" and any express or implied warranties, including, but not limited
-to, the implied warranties of merchantability and fitness for a
-particular purpose are disclaimed. In no event shall the copyright owner
-or contributors be liable for any direct, indirect, incidental, special,
-exemplary, or consequential damages (including, but not limited to,
-procurement of substitute goods or services; loss of use, data, or
-profits; or business interruption) however caused and on any theory of
-liability, whether in contract, strict liability, or tort (including
-negligence or otherwise) arising in any way out of the use of this
-software, even if advised of the possibility of such damage.

examples/includes/PHP-SmartyPants-1.5.1e/smartypants.php

@@ -1,860 +0,0 @@
-<?php
-
-#
-# SmartyPants  -  Smart punctuation for web sites
-#
-# by John Gruber
-# <http://daringfireball.net>
-#
-# PHP port by Michel Fortin
-# <http://www.michelf.com/>
-#
-# Copyright (c) 2003-2004 John Gruber
-# Copyright (c) 2004-2005 Michel Fortin
-#
-
-
-global  $SmartyPantsPHPVersion, $SmartyPantsSyntaxVersion,
-        $smartypants_attr, $sp_tags_to_skip;
-
-$SmartyPantsPHPVersion    = '1.5.1e'; # Fru 9 Dec 2005
-$SmartyPantsSyntaxVersion = '1.5.1';  # Fri 12 Mar 2004
-
-
-# Configurable variables:
-$smartypants_attr = "1";  # Change this to configure.
-                          #  1 =>  "--" for em-dashes; no en-dash support
-                          #  2 =>  "---" for em-dashes; "--" for en-dashes
-                          #  3 =>  "--" for em-dashes; "---" for en-dashes
-                          #  See docs for more configuration options.
-
-# Globals:
-$sp_tags_to_skip = '<(/?)(?:pre|code|kbd|script|math)[\s>]';
-
-
-# -- WordPress plugin interface -----------------------------------------------
-/*
-Plugin Name: SmartyPants
-Plugin URI: http://www.michelf.com/projects/php-smartypants/
-Description: SmartyPants is a web publishing utility that translates plain ASCII punctuation characters into &#8220;smart&#8221; typographic punctuation HTML entities. This plugin <strong>replace the default WordPress Texturize algorithm</strong> for the content and the title of your posts, the comments body and author name, and everywhere else Texturize normally apply. Based on the original Perl version by <a href="http://daringfireball.net/">John Gruber</a>.
-Version: 1.5.1e
-Author: Michel Fortin
-Author URI: http://www.michelf.com/
-*/
-if (isset($wp_version)) {
-    # Remove default Texturize filter that would conflict with SmartyPants.
-    remove_filter('category_description', 'wptexturize');
-    remove_filter('list_cats', 'wptexturize');
-    remove_filter('comment_author', 'wptexturize');
-    remove_filter('comment_text', 'wptexturize');
-    remove_filter('single_post_title', 'wptexturize');
-    remove_filter('the_title', 'wptexturize');
-    remove_filter('the_content', 'wptexturize');
-    remove_filter('the_excerpt', 'wptexturize');
-    # Add SmartyPants filter with priority 10 (same as Texturize).
-    add_filter('category_description', 'SmartyPants', 10);
-    add_filter('list_cats', 'SmartyPants', 10);
-    add_filter('comment_author', 'SmartyPants', 10);
-    add_filter('comment_text', 'SmartyPants', 10);
-    add_filter('single_post_title', 'SmartyPants', 10);
-    add_filter('the_title', 'SmartyPants', 10);
-    add_filter('the_content', 'SmartyPants', 10);
-    add_filter('the_excerpt', 'SmartyPants', 10);
-}
-
-# -- Smarty Modifier Interface ------------------------------------------------
-function smarty_modifier_smartypants($text, $attr = NULL) {
-    return SmartyPants($text, $attr);
-}
-
-
-
-function SmartyPants($text, $attr = NULL, $ctx = NULL) {
-    global $smartypants_attr, $sp_tags_to_skip;
-    # Paramaters:
-    $text;   # text to be parsed
-    $attr;   # value of the smart_quotes="" attribute
-    $ctx;    # MT context object (unused)
-    if ($attr == NULL) $attr = $smartypants_attr;
-
-    # Options to specify which transformations to make:
-    $do_stupefy = FALSE;
-    $convert_quot = 0;  # should we translate &quot; entities into normal quotes?
-
-    # Parse attributes:
-    # 0 : do nothing
-    # 1 : set all
-    # 2 : set all, using old school en- and em- dash shortcuts
-    # 3 : set all, using inverted old school en and em- dash shortcuts
-    #
-    # q : quotes
-    # b : backtick quotes (``double'' only)
-    # B : backtick quotes (``double'' and `single')
-    # d : dashes
-    # D : old school dashes
-    # i : inverted old school dashes
-    # e : ellipses
-    # w : convert &quot; entities to " for Dreamweaver users
-
-    if ($attr == "0") {
-        # Do nothing.
-        return $text;
-    }
-    else if ($attr == "1") {
-        # Do everything, turn all options on.
-        $do_quotes    = 1;
-        $do_backticks = 1;
-        $do_dashes    = 1;
-        $do_ellipses  = 1;
-    }
-    else if ($attr == "2") {
-        # Do everything, turn all options on, use old school dash shorthand.
-        $do_quotes    = 1;
-        $do_backticks = 1;
-        $do_dashes    = 2;
-        $do_ellipses  = 1;
-    }
-    else if ($attr == "3") {
-        # Do everything, turn all options on, use inverted old school dash shorthand.
-        $do_quotes    = 1;
-        $do_backticks = 1;
-        $do_dashes    = 3;
-        $do_ellipses  = 1;
-    }
-    else if ($attr == "-1") {
-        # Special "stupefy" mode.
-        $do_stupefy   = 1;
-    }
-    else {
-        $chars = preg_split('//', $attr);
-        foreach ($chars as $c){
-            if      ($c == "q") { $do_quotes    = 1; }
-            else if ($c == "b") { $do_backticks = 1; }
-            else if ($c == "B") { $do_backticks = 2; }
-            else if ($c == "d") { $do_dashes    = 1; }
-            else if ($c == "D") { $do_dashes    = 2; }
-            else if ($c == "i") { $do_dashes    = 3; }
-            else if ($c == "e") { $do_ellipses  = 1; }
-            else if ($c == "w") { $convert_quot = 1; }
-            else {
-                # Unknown attribute option, ignore.
-            }
-        }
-    }
-
-    $tokens = _TokenizeHTML($text);
-    $result = '';
-    $in_pre = 0;  # Keep track of when we're inside <pre> or <code> tags.
-
-    $prev_token_last_char = "";     # This is a cheat, used to get some context
-                                    # for one-character tokens that consist of
-                                    # just a quote char. What we do is remember
-                                    # the last character of the previous text
-                                    # token, to use as context to curl single-
-                                    # character quote tokens correctly.
-
-    foreach ($tokens as $cur_token) {
-        if ($cur_token[0] == "tag") {
-            # Don't mess with quotes inside tags.
-            $result .= $cur_token[1];
-            if (preg_match("@$sp_tags_to_skip@", $cur_token[1], $matches)) {
-                $in_pre = isset($matches[1]) && $matches[1] == '/' ? 0 : 1;
-            }
-        } else {
-            $t = $cur_token[1];
-            $last_char = substr($t, -1); # Remember last char of this token before processing.
-            if (! $in_pre) {
-                $t = ProcessEscapes($t);
-
-                if ($convert_quot) {
-                    $t = preg_replace('/&quot;/', '"', $t);
-                }
-
-                if ($do_dashes) {
-                    if ($do_dashes == 1) $t = EducateDashes($t);
-                    if ($do_dashes == 2) $t = EducateDashesOldSchool($t);
-                    if ($do_dashes == 3) $t = EducateDashesOldSchoolInverted($t);
-                }
-
-                if ($do_ellipses) $t = EducateEllipses($t);
-
-                # Note: backticks need to be processed before quotes.
-                if ($do_backticks) {
-                    $t = EducateBackticks($t);
-                    if ($do_backticks == 2) $t = EducateSingleBackticks($t);
-                }
-
-                if ($do_quotes) {
-                    if ($t == "'") {
-                        # Special case: single-character ' token
-                        if (preg_match('/\S/', $prev_token_last_char)) {
-                            $t = "&#8217;";
-                        }
-                        else {
-                            $t = "&#8216;";
-                        }
-                    }
-                    else if ($t == '"') {
-                        # Special case: single-character " token
-                        if (preg_match('/\S/', $prev_token_last_char)) {
-                            $t = "&#8221;";
-                        }
-                        else {
-                            $t = "&#8220;";
-                        }
-                    }
-                    else {
-                        # Normal case:
-                        $t = EducateQuotes($t);
-                    }
-                }
-
-                if ($do_stupefy) $t = StupefyEntities($t);
-            }
-            $prev_token_last_char = $last_char;
-            $result .= $t;
-        }
-    }
-
-    return $result;
-}
-
-
-function SmartQuotes($text, $attr = NULL, $ctx = NULL) {
-    global $smartypants_attr, $sp_tags_to_skip;
-    # Paramaters:
-    $text;   # text to be parsed
-    $attr;   # value of the smart_quotes="" attribute
-    $ctx;    # MT context object (unused)
-    if ($attr == NULL) $attr = $smartypants_attr;
-
-    $do_backticks;   # should we educate ``backticks'' -style quotes?
-
-    if ($attr == 0) {
-        # do nothing;
-        return $text;
-    }
-    else if ($attr == 2) {
-        # smarten ``backticks'' -style quotes
-        $do_backticks = 1;
-    }
-    else {
-        $do_backticks = 0;
-    }
-
-    # Special case to handle quotes at the very end of $text when preceded by
-    # an HTML tag. Add a space to give the quote education algorithm a bit of
-    # context, so that it can guess correctly that it's a closing quote:
-    $add_extra_space = 0;
-    if (preg_match("/>['\"]\\z/", $text)) {
-        $add_extra_space = 1; # Remember, so we can trim the extra space later.
-        $text .= " ";
-    }
-
-    $tokens = _TokenizeHTML($text);
-    $result = '';
-    $in_pre = 0;  # Keep track of when we're inside <pre> or <code> tags
-
-    $prev_token_last_char = "";     # This is a cheat, used to get some context
-                                    # for one-character tokens that consist of
-                                    # just a quote char. What we do is remember
-                                    # the last character of the previous text
-                                    # token, to use as context to curl single-
-                                    # character quote tokens correctly.
-
-    foreach ($tokens as $cur_token) {
-        if ($cur_token[0] == "tag") {
-            # Don't mess with quotes inside tags
-            $result .= $cur_token[1];
-            if (preg_match("@$sp_tags_to_skip@", $cur_token[1], $matches)) {
-                $in_pre = isset($matches[1]) && $matches[1] == '/' ? 0 : 1;
-            }
-        } else {
-            $t = $cur_token[1];
-            $last_char = substr($t, -1); # Remember last char of this token before processing.
-            if (! $in_pre) {
-                $t = ProcessEscapes($t);
-                if ($do_backticks) {
-                    $t = EducateBackticks($t);
-                }
-
-                if ($t == "'") {
-                    # Special case: single-character ' token
-                    if (preg_match('/\S/', $prev_token_last_char)) {
-                        $t = "&#8217;";
-                    }
-                    else {
-                        $t = "&#8216;";
-                    }
-                }
-                else if ($t == '"') {
-                    # Special case: single-character " token
-                    if (preg_match('/\S/', $prev_token_last_char)) {
-                        $t = "&#8221;";
-                    }
-                    else {
-                        $t = "&#8220;";
-                    }
-                }
-                else {
-                    # Normal case:
-                    $t = EducateQuotes($t);
-                }
-
-            }
-            $prev_token_last_char = $last_char;
-            $result .= $t;
-        }
-    }
-
-    if ($add_extra_space) {
-        preg_replace('/ \z/', '', $result);  # Trim trailing space if we added one earlier.
-    }
-    return $result;
-}
-
-
-function SmartDashes($text, $attr = NULL, $ctx = NULL) {
-    global $smartypants_attr, $sp_tags_to_skip;
-    # Paramaters:
-    $text;   # text to be parsed
-    $attr;   # value of the smart_dashes="" attribute
-    $ctx;    # MT context object (unused)
-    if ($attr == NULL) $attr = $smartypants_attr;
-
-    # reference to the subroutine to use for dash education, default to EducateDashes:
-    $dash_sub_ref = 'EducateDashes';
-
-    if ($attr == 0) {
-        # do nothing;
-        return $text;
-    }
-    else if ($attr == 2) {
-        # use old smart dash shortcuts, "--" for en, "---" for em
-        $dash_sub_ref = 'EducateDashesOldSchool';
-    }
-    else if ($attr == 3) {
-        # inverse of 2, "--" for em, "---" for en
-        $dash_sub_ref = 'EducateDashesOldSchoolInverted';
-    }
-
-    $tokens;
-    $tokens = _TokenizeHTML($text);
-
-    $result = '';
-    $in_pre = 0;  # Keep track of when we're inside <pre> or <code> tags
-    foreach ($tokens as $cur_token) {
-        if ($cur_token[0] == "tag") {
-            # Don't mess with quotes inside tags
-            $result .= $cur_token[1];
-            if (preg_match("@$sp_tags_to_skip@", $cur_token[1], $matches)) {
-                $in_pre = isset($matches[1]) && $matches[1] == '/' ? 0 : 1;
-            }
-        } else {
-            $t = $cur_token[1];
-            if (! $in_pre) {
-                $t = ProcessEscapes($t);
-                $t = $dash_sub_ref($t);
-            }
-            $result .= $t;
-        }
-    }
-    return $result;
-}
-
-
-function SmartEllipses($text, $attr = NULL, $ctx = NULL) {
-    # Paramaters:
-    $text;   # text to be parsed
-    $attr;   # value of the smart_ellipses="" attribute
-    $ctx;    # MT context object (unused)
-    if ($attr == NULL) $attr = $smartypants_attr;
-
-    if ($attr == 0) {
-        # do nothing;
-        return $text;
-    }
-
-    $tokens;
-    $tokens = _TokenizeHTML($text);
-
-    $result = '';
-    $in_pre = 0;  # Keep track of when we're inside <pre> or <code> tags
-    foreach ($tokens as $cur_token) {
-        if ($cur_token[0] == "tag") {
-            # Don't mess with quotes inside tags
-            $result .= $cur_token[1];
-            if (preg_match("@$sp_tags_to_skip@", $cur_token[1], $matches)) {
-                $in_pre = isset($matches[1]) && $matches[1] == '/' ? 0 : 1;
-            }
-        } else {
-            $t = $cur_token[1];
-            if (! $in_pre) {
-                $t = ProcessEscapes($t);
-                $t = EducateEllipses($t);
-            }
-            $result .= $t;
-        }
-    }
-    return $result;
-}
-
-
-function EducateQuotes($_) {
-#
-#   Parameter:  String.
-#
-#   Returns:    The string, with "educated" curly quote HTML entities.
-#
-#   Example input:  "Isn't this fun?"
-#   Example output: &#8220;Isn&#8217;t this fun?&#8221;
-#
-    # Make our own "punctuation" character class, because the POSIX-style
-    # [:PUNCT:] is only available in Perl 5.6 or later:
-    $punct_class = "[!\"#\\$\\%'()*+,-.\\/:;<=>?\\@\\[\\\\\]\\^_`{|}~]";
-
-    # Special case if the very first character is a quote
-    # followed by punctuation at a non-word-break. Close the quotes by brute force:
-    $_ = preg_replace(
-        array("/^'(?=$punct_class\\B)/", "/^\"(?=$punct_class\\B)/"),
-        array('&#8217;',                 '&#8221;'), $_);
-
-
-    # Special case for double sets of quotes, e.g.:
-    #   <p>He said, "'Quoted' words in a larger quote."</p>
-    $_ = preg_replace(
-        array("/\"'(?=\w)/",    "/'\"(?=\w)/"),
-        array('&#8220;&#8216;', '&#8216;&#8220;'), $_);
-
-    # Special case for decade abbreviations (the '80s):
-    $_ = preg_replace("/'(?=\\d{2}s)/", '&#8217;', $_);
-
-    $close_class = '[^\ \t\r\n\[\{\(\-]';
-    $dec_dashes = '&\#8211;|&\#8212;';
-
-    # Get most opening single quotes:
-    $_ = preg_replace("{
-        (
-            \\s          |   # a whitespace char, or
-            &nbsp;      |   # a non-breaking space entity, or
-            --          |   # dashes, or
-            &[mn]dash;  |   # named dash entities
-            $dec_dashes |   # or decimal entities
-            &\\#x201[34];    # or hex
-        )
-        '                   # the quote
-        (?=\\w)              # followed by a word character
-        }x", '\1&#8216;', $_);
-    # Single closing quotes:
-    $_ = preg_replace("{
-        ($close_class)?
-        '
-        (?(1)|          # If $1 captured, then do nothing;
-          (?=\\s | s\\b)  # otherwise, positive lookahead for a whitespace
-        )               # char or an 's' at a word ending position. This
-                        # is a special case to handle something like:
-                        # \"<i>Custer</i>'s Last Stand.\"
-        }xi", '\1&#8217;', $_);
-
-    # Any remaining single quotes should be opening ones:
-    $_ = str_replace("'", '&#8216;', $_);
-
-
-    # Get most opening double quotes:
-    $_ = preg_replace("{
-        (
-            \\s          |   # a whitespace char, or
-            &nbsp;      |   # a non-breaking space entity, or
-            --          |   # dashes, or
-            &[mn]dash;  |   # named dash entities
-            $dec_dashes |   # or decimal entities
-            &\\#x201[34];    # or hex
-        )
-        \"                   # the quote
-        (?=\\w)              # followed by a word character
-        }x", '\1&#8220;', $_);
-
-    # Double closing quotes:
-    $_ = preg_replace("{
-        ($close_class)?
-        \"
-        (?(1)|(?=\\s))   # If $1 captured, then do nothing;
-                           # if not, then make sure the next char is whitespace.
-        }x", '\1&#8221;', $_);
-
-    # Any remaining quotes should be opening ones.
-    $_ = str_replace('"', '&#8220;', $_);
-
-    return $_;
-}
-
-
-function EducateBackticks($_) {
-#
-#   Parameter:  String.
-#   Returns:    The string, with ``backticks'' -style double quotes
-#               translated into HTML curly quote entities.
-#
-#   Example input:  ``Isn't this fun?''
-#   Example output: &#8220;Isn't this fun?&#8221;
-#
-
-    $_ = str_replace(array("``",       "''",),
-                     array('&#8220;', '&#8221;'), $_);
-    return $_;
-}
-
-
-function EducateSingleBackticks($_) {
-#
-#   Parameter:  String.
-#   Returns:    The string, with `backticks' -style single quotes
-#               translated into HTML curly quote entities.
-#
-#   Example input:  `Isn't this fun?'
-#   Example output: &#8216;Isn&#8217;t this fun?&#8217;
-#
-
-    $_ = str_replace(array("`",       "'",),
-                     array('&#8216;', '&#8217;'), $_);
-    return $_;
-}
-
-
-function EducateDashes($_) {
-#
-#   Parameter:  String.
-#
-#   Returns:    The string, with each instance of "--" translated to
-#               an em-dash HTML entity.
-#
-
-    $_ = str_replace('--', '&#8212;', $_);
-    return $_;
-}
-
-
-function EducateDashesOldSchool($_) {
-#
-#   Parameter:  String.
-#
-#   Returns:    The string, with each instance of "--" translated to
-#               an en-dash HTML entity, and each "---" translated to
-#               an em-dash HTML entity.
-#
-
-    #                      em         en
-    $_ = str_replace(array("---",     "--",),
-                     array('&#8212;', '&#8211;'), $_);
-    return $_;
-}
-
-
-function EducateDashesOldSchoolInverted($_) {
-#
-#   Parameter:  String.
-#
-#   Returns:    The string, with each instance of "--" translated to
-#               an em-dash HTML entity, and each "---" translated to
-#               an en-dash HTML entity. Two reasons why: First, unlike the
-#               en- and em-dash syntax supported by
-#               EducateDashesOldSchool(), it's compatible with existing
-#               entries written before SmartyPants 1.1, back when "--" was
-#               only used for em-dashes.  Second, em-dashes are more
-#               common than en-dashes, and so it sort of makes sense that
-#               the shortcut should be shorter to type. (Thanks to Aaron
-#               Swartz for the idea.)
-#
-
-    #                      en         em
-    $_ = str_replace(array("---",     "--",),
-                     array('&#8211;', '&#8212;'), $_);
-    return $_;
-}
-
-
-function EducateEllipses($_) {
-#
-#   Parameter:  String.
-#   Returns:    The string, with each instance of "..." translated to
-#               an ellipsis HTML entity. Also converts the case where
-#               there are spaces between the dots.
-#
-#   Example input:  Huh...?
-#   Example output: Huh&#8230;?
-#
-
-    $_ = str_replace(array("...",     ". . .",), '&#8230;', $_);
-    return $_;
-}
-
-
-function StupefyEntities($_) {
-#
-#   Parameter:  String.
-#   Returns:    The string, with each SmartyPants HTML entity translated to
-#               its ASCII counterpart.
-#
-#   Example input:  &#8220;Hello &#8212; world.&#8221;
-#   Example output: "Hello -- world."
-#
-
-                        #  en-dash    em-dash
-    $_ = str_replace(array('&#8211;', '&#8212;'),
-                     array('-',       '--'), $_);
-
-    # single quote         open       close
-    $_ = str_replace(array('&#8216;', '&#8217;'), "'", $_);
-
-    # double quote         open       close
-    $_ = str_replace(array('&#8220;', '&#8221;'), '"', $_);
-
-    $_ = str_replace('&#8230;', '...', $_); # ellipsis
-
-    return $_;
-}
-
-
-function ProcessEscapes($_) {
-#
-#   Parameter:  String.
-#   Returns:    The string, with after processing the following backslash
-#               escape sequences. This is useful if you want to force a "dumb"
-#               quote or other character to appear.
-#
-#               Escape  Value
-#               ------  -----
-#               \\      &#92;
-#               \"      &#34;
-#               \'      &#39;
-#               \.      &#46;
-#               \-      &#45;
-#               \`      &#96;
-#
-    $_ = str_replace(
-        array('\\\\',  '\"',    "\'",    '\.',    '\-',    '\`'),
-        array('&#92;', '&#34;', '&#39;', '&#46;', '&#45;', '&#96;'), $_);
-
-    return $_;
-}
-
-
-# _TokenizeHTML is shared between PHP SmartyPants and PHP Markdown.
-# We only define it if it is not already defined.
-if (!function_exists('_TokenizeHTML')) :
-function _TokenizeHTML($str) {
-#
-#   Parameter:  String containing HTML markup.
-#   Returns:    An array of the tokens comprising the input
-#               string. Each token is either a tag (possibly with nested,
-#               tags contained therein, such as <a href="<MTFoo>">, or a
-#               run of text between tags. Each element of the array is a
-#               two-element array; the first is either 'tag' or 'text';
-#               the second is the actual value.
-#
-#
-#   Regular expression derived from the _tokenize() subroutine in
-#   Brad Choate's MTRegex plugin.
-#   <http://www.bradchoate.com/past/mtregex.php>
-#
-    $index = 0;
-    $tokens = array();
-
-    $match = '(?s:<!(?:--.*?--\s*)+>)|'.    # comment
-             '(?s:<\?.*?\?>)|'.             # processing instruction
-                                            # regular tags
-             '(?:<[/!$]?[-a-zA-Z0-9:]+\b(?>[^"\'>]+|"[^"]*"|\'[^\']*\')*>)';
-
-    $parts = preg_split("{($match)}", $str, -1, PREG_SPLIT_DELIM_CAPTURE);
-
-    foreach ($parts as $part) {
-        if (++$index % 2 && $part != '')
-            $tokens[] = array('text', $part);
-        else
-            $tokens[] = array('tag', $part);
-    }
-    return $tokens;
-}
-endif;
-
-
-/*
-
-PHP SmartyPants
-===============
-
-Description
------------
-
-This is a PHP translation of the original SmartyPants quote educator written in
-Perl by John Gruber.
-
-SmartyPants is a web publishing utility that translates plain ASCII
-punctuation characters into "smart" typographic punctuation HTML
-entities. SmartyPants can perform the following transformations:
-
-*   Straight quotes (`"` and `'`) into "curly" quote HTML entities
-*   Backticks-style quotes (` ``like this'' `) into "curly" quote HTML
-    entities
-*   Dashes (`--` and `---`) into en- and em-dash entities
-*   Three consecutive dots (`...`) into an ellipsis entity
-
-SmartyPants does not modify characters within `<pre>`, `<code>`, `<kbd>`,
-`<script>`, or `<math>` tag blocks. Typically, these tags are used to
-display text where smart quotes and other "smart punctuation" would not
-be appropriate, such as source code or example markup.
-
-
-### Backslash Escapes ###
-
-If you need to use literal straight quotes (or plain hyphens and
-periods), SmartyPants accepts the following backslash escape sequences
-to force non-smart punctuation. It does so by transforming the escape
-sequence into a decimal-encoded HTML entity:
-
-    Escape  Value  Character
-    ------  -----  ---------
-      \\    &#92;    \
-      \"    &#34;    "
-      \'    &#39;    '
-      \.    &#46;    .
-      \-    &#45;    -
-      \`    &#96;    `
-
-This is useful, for example, when you want to use straight quotes as
-foot and inch marks: 6'2" tall; a 17" iMac.
-
-
-Bugs
-----
-
-To file bug reports or feature requests (other than topics listed in the
-Caveats section above) please send email to:
-
-<michel.fortin@michelf.com>
-
-If the bug involves quotes being curled the wrong way, please send example
-text to illustrate.
-
-
-### Algorithmic Shortcomings ###
-
-One situation in which quotes will get curled the wrong way is when
-apostrophes are used at the start of leading contractions. For example:
-
-    'Twas the night before Christmas.
-
-In the case above, SmartyPants will turn the apostrophe into an opening
-single-quote, when in fact it should be a closing one. I don't think
-this problem can be solved in the general case -- every word processor
-I've tried gets this wrong as well. In such cases, it's best to use the
-proper HTML entity for closing single-quotes (`&#8217;`) by hand.
-
-
-Version History
----------------
-
-1.5.1e (9 Dec 2005)
-
-*   Corrected a bug that prevented special characters from being
-    escaped.
-
-
-1.5.1d (25 May 2005)
-
-*   Corrected a small bug in `_TokenizeHTML` where a Doctype declaration
-    was not seen as HTML (smart quotes where applied inside).
-
-
-1.5.1c (13 Dec 2004)
-
-*   Changed a regular expression in `_TokenizeHTML` that could lead to
-    a segmentation fault with PHP 4.3.8 on Linux.
-
-
-1.5.1b (6 Sep 2004)
-
-*   Corrected a problem with quotes immediately following a dash
-    with no space between: `Text--"quoted text"--text.`
-
-*   PHP SmartyPants can now be used as a modifier by the Smarty
-    template engine. Rename the file to "modifier.smartypants.php"
-    and put it in your smarty plugins folder.
-
-*   Replaced a lot of space characters by tabs, saving about 4 KB.
-
-
-1.5.1a (30 Jun 2004)
-
-*   PHP Markdown and PHP Smartypants now share the same `_TokenizeHTML`
-    function when loaded simultanously.
-
-*   Changed the internals of `_TokenizeHTML` to lower the PHP version
-    requirement to PHP 4.0.5.
-
-
-1.5.1 (6 Jun 2004)
-
-*   Initial release of PHP SmartyPants, based on version 1.5.1 of the
-    original SmartyPants written in Perl.
-
-
-Author
-------
-
-John Gruber
-<http://daringfireball.net/>
-
-Ported to PHP by Michel Fortin
-<http://www.michelf.com/>
-
-
-Additional Credits
-------------------
-
-Portions of this plug-in are based on Brad Choate's nifty MTRegex plug-in.
-Brad Choate also contributed a few bits of source code to this plug-in.
-Brad Choate is a fine hacker indeed. (<http://bradchoate.com/>)
-
-Jeremy Hedley (<http://antipixel.com/>) and Charles Wiltgen
-(<http://playbacktime.com/>) deserve mention for exemplary beta testing.
-
-
-Copyright and License
----------------------
-
-Copyright (c) 2003 John Gruber
-<http://daringfireball.net/>
-All rights reserved.
-
-Copyright (c) 2004-2005 Michel Fortin
-<http://www.michelf.com>
-
-Redistribution and use in source and binary forms, with or without
-modification, are permitted provided that the following conditions are met:
-
-*   Redistributions of source code must retain the above copyright
-    notice, this list of conditions and the following disclaimer.
-
-*   Redistributions in binary form must reproduce the above copyright
-    notice, this list of conditions and the following disclaimer in the
-    documentation and/or other materials provided with the distribution.
-
-*   Neither the name "SmartyPants" nor the names of its contributors may
-    be used to endorse or promote products derived from this software
-    without specific prior written permission.
-
-This software is provided by the copyright holders and contributors "as is"
-and any express or implied warranties, including, but not limited to, the
-implied warranties of merchantability and fitness for a particular purpose
-are disclaimed. In no event shall the copyright owner or contributors be
-liable for any direct, indirect, incidental, special, exemplary, or
-consequential damages (including, but not limited to, procurement of
-substitute goods or services; loss of use, data, or profits; or business
-interruption) however caused and on any theory of liability, whether in
-contract, strict liability, or tort (including negligence or otherwise)
-arising in any way out of the use of this software, even if advised of the
-possibility of such damage.
-
-*/
-?>

examples/includes/geshi/contrib/aliased.php

@@ -1,124 +0,0 @@
-<?php
-
-/**
- * Another GeSHi example script
- *
- * Configure your Apache server with 'AcceptPathInfo true' and something like
- * 'Alias /viewmysource /var/www/geshi/contrib/aliased.php'. Don't forget
- * to protect this alias as necessary.
- *
- * Usage - visit /viewmysource/file.name.ext to see that file with syntax
- * highlighting, where "viewmysource" is the name of the alias you set up.
- * You can use this without an alias too, just by visiting
- * aliased.php/file.name.ext.
- *
- * @author  Ross Golder <ross@golder.org>
- * @version $Id: aliased.php 785 2006-07-19 10:09:45Z oracleshinoda $
- */
-
-// Your config here
-define("SOURCE_ROOT", "/var/www/your/source/root/");
-
-// Assume you've put geshi in the include_path already
-require_once("geshi.php");
-
-// Get path info
-$path = SOURCE_ROOT.$_SERVER['PATH_INFO'];
-
-// Check for dickheads trying to use '../' to get to sensitive areas
-$base_path_len = strlen(SOURCE_ROOT);
-$real_path = realpath($path);
-if(strncmp($real_path, SOURCE_ROOT, $base_path_len)) {
-    exit("Stop that.");
-}
-
-// Check file exists
-if(!file_exists($path)) {
-    exit("File not found ($path).");
-}
-
-// Gather contents
-$contents = file_get_contents($path);
-
-// Prepare GeSHi instance
-$geshi =& new GeSHi($contents, "PHP");
-$geshi->set_header_type(GESHI_HEADER_PRE);
-$geshi->enable_classes();
-$geshi->enable_line_numbers(GESHI_FANCY_LINE_NUMBERS, 10);
-$geshi->set_overall_style('color: #000066; border: 1px solid #d0d0d0; background-color: #f0f0f0;', true);
-$geshi->set_line_style('font: normal normal 95% \'Courier New\', Courier, monospace; color: #003030;', 'font-weight: bold; color: #006060;', true);
-$geshi->set_code_style('color: #000020;', 'color: #000020;');
-$geshi->set_link_styles(GESHI_LINK, 'color: #000060;');
-$geshi->set_link_styles(GESHI_HOVER, 'background-color: #f0f000;');
-$geshi->set_header_content('Source code viewer');
-$geshi->set_header_content_style('font-family: Verdana, Arial, sans-serif; color: #808080; font-size: 70%; font-weight: bold; background-color: #f0f0ff; border-bottom: 1px solid #d0d0d0; padding: 2px;');
-$geshi->set_footer_content('Parsed in <TIME> seconds,  using GeSHi <VERSION>');
-$geshi->set_footer_content_style('font-family: Verdana, Arial, sans-serif; color: #808080; font-size: 70%; font-weight: bold; background-color: #f0f0ff; border-top: 1px solid #d0d0d0; padding: 2px;');
-
-?>
-<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Strict//EN"
-     "http://www.w3.org/TR/xhtml1/DTD/xhtml1-strict.dtd">
-<html xmlns="http://www.w3.org/1999/xhtml" xml:lang="en" lang="en">
-<head>
-    <title>Source code viewer - <?php echo $path; ?></title>
-    <style type="text/css">
-    <!--
-    <?php
-        // Output the stylesheet. Note it doesn't output the <style> tag
-    echo $geshi->get_stylesheet();
-    ?>
-    html {
-        background-color: #f0f0f0;
-    }
-    body {
-        font-family: Verdana, Arial, sans-serif;
-        margin: 10px;
-        border: 2px solid #e0e0e0;
-        background-color: #fcfcfc;
-        padding: 5px;
-    }
-    h2 {
-        margin: .1em 0 .2em .5em;
-        border-bottom: 1px solid #b0b0b0;
-        color: #b0b0b0;
-        font-weight: normal;
-        font-size: 150%;
-    }
-    h3 {
-        margin: .1em 0 .2em .5em;
-        color: #b0b0b0;
-        font-weight: normal;
-        font-size: 120%;
-    }
-    #footer {
-        text-align: center;
-        font-size: 80%;
-        color: #a9a9a9;
-    }
-    #footer a {
-        color: #9999ff;
-    }
-    textarea {
-        border: 1px solid #b0b0b0;
-        font-size: 90%;
-        color: #333;
-        margin-left: 20px;
-    }
-    select, input {
-        margin-left: 20px;
-    }
-    p {
-        font-size: 90%;
-        margin-left: .5em;
-    }
-    -->
-    </style>
-</head>
-<body>
-<?php
-// The fun part :)
-echo $geshi->parse_code();
-?>
-<hr/>
-</body>
-</html>

examples/includes/geshi/contrib/cssgen.php

@@ -1,456 +0,0 @@
-<?php
-/*************************************************************************************
- * cssgen.php
- * ----------
- * Author: Nigel McNie (nigel@geshi.org)
- * Copyright: (c) 2004 Nigel McNie
- * Release Version: 1.0.8.1
- * Date Started: 2004/05/20
- *
- * Application to generate custom CSS files for GeSHi (based on an idea by Andreas
- * Gohr)
- *
- *************************************************************************************
- *
- *     This file is part of GeSHi.
- *
- *   GeSHi is free software; you can redistribute it and/or modify
- *   it under the terms of the GNU General Public License as published by
- *   the Free Software Foundation; either version 2 of the License, or
- *   (at your option) any later version.
- *
- *   GeSHi is distributed in the hope that it will be useful,
- *   but WITHOUT ANY WARRANTY; without even the implied warranty of
- *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *   GNU General Public License for more details.
- *
- *   You should have received a copy of the GNU General Public License
- *   along with GeSHi; if not, write to the Free Software
- *   Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- *
- ************************************************************************************/
-
-set_magic_quotes_runtime(0);
-//
-// Functions
-//
-
-function make_header ( $title )
-{
-    echo '<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Strict//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-strict.dtd">
-<html xmlns="http://www.w3.org/1999/xhtml" xml:lang="en" lang="en">
-<head>
-    <title>GeSHi CSS Generator :: ' . $title . ' </title>
-    <style type="text/css" media="screen">
-    <!--
-        html {
-            font-family: Verdana, Arial, sans-serif;
-            font-size: 80%;
-            background-color: #d0d0d0;
-        }
-        body {
-            margin: 10px;
-            padding: 5px;
-            border: 1px solid #f0f0f0;
-            background-color: #f6f6f6;
-        }
-        h1 {
-            border-bottom: 2px solid #e0e0e0;
-            font-weight: normal;
-            font-size: 150%;
-            color: #c0c0c0;
-        }
-        input, textarea {
-            border: 1px solid #d0d0d0;
-        }
-        th {
-            text-align: right;
-            font-weight: normal;
-        }
-        pre {
-            font-size: 110%;
-            color: #202020;
-        }
-        #footer {
-            color: #b0b0b0;
-            text-align: center;
-            font-size: 90%;
-            margin: 0 auto;
-            border-top: 1px solid #e0e0e0;
-        }
-        #footer a {
-            color: #c0c0c0;
-        }
-    -->
-    </style>
-    <script type="text/javascript">
-    function select (state)
-    {
-        var cboxes = document.getElementsByTagName(\'input\');
-        for (var i = 0; i < cboxes.length; i++) {
-            if (cboxes[i].type == "checkbox") {
-                if (state == "true") {
-                    cboxes[i].checked = true;
-                } else if (state == "false") {
-                    cboxes[i].checked = false;
-                } else if (state == "invert") {
-                    cboxes[i].checked = !cboxes[i].checked;
-                }
-            }
-        }
-    }
-    </script>
-</head>
-<body>
-<h1>' . $title . '</h1>
-';
-}
-
-function make_footer ()
-{
-    echo '<div id="footer"><a href="http://qbnz.com/highlighter/">GeSHi</a> &copy; Nigel McNie, 2004, released under the GPL</div></body>
-</html>';
-}
-
-
-function get_var ( $var_name )
-{
-    if ( isset($_GET[$var_name]) )
-    {
-        return str_replace("\'", "'", $_GET[$var_name]);
-    }
-    elseif ( isset($_POST[$var_name]) )
-    {
-        return str_replace("\'", "'", $_POST[$var_name]);
-    }
-    return null;
-}
-
-
-
-//
-// Unset everything
-//
-foreach ( $_REQUEST as $var )
-{
-    unset($$var);
-}
-foreach ( array(
-    '_POST' => 'HTTP_POST_VARS',
-    '_GET' => 'HTTP_GET_VARS',
-    '_COOKIE' => 'HTTP_COOKIE_VARS',
-    '_SERVER' => 'HTTP_SERVER_VARS',
-    '_ENV' => 'HTTP_ENV_VARS',
-    '_FILES' => 'HTTP_POST_FILES')  as $array => $other )
-{
-    if ( !isset($$array) )
-    {
-        $$array = $$other;
-    }
-    unset($$other);
-}
-
-
-// Get what step we're up to
-$step = get_var('step');
-
-if ( !$step || $step == 1 )
-{
-    $errors = 0;
-    make_header('Step 1');
-    echo "Welcome to the GeSHi CSS generator.<br /><pre>Searching for GeSHi...          ";
-
-    // Find GeSHi
-    $geshi_path = get_var('geshi-path');
-    $geshi_lang_path = get_var('geshi-lang-path');
-
-    if ( !$geshi_path )
-    {
-        $geshi_path = '../geshi.php';
-    }
-    if ( !$geshi_lang_path )
-    {
-        $geshi_lang_path = '../geshi/';
-    }
-
-
-    if ( is_file($geshi_path) && is_readable($geshi_path) )
-    {
-        // Get file contents and see if GeSHi is in here
-        $file = @file($geshi_path);
-        $contents = '';
-        foreach ( $file as $line )
-        {
-            $contents .= $line;
-        }
-        if ( strpos($contents, '<?php
-/**
- * GeSHi - Generic Syntax Highlighter') !== false )
-         {
-            echo '<span style="color: green;">Found at ' . realpath($geshi_path) . '</span>';
-        }
-        else
-        {
-            ++$errors;
-            $no_geshi_dot_php_error = true;
-            echo '<span style="color: red;">Not found</span>';
-        }
-    }
-    else
-    {
-        ++$errors;
-        $no_geshi_dot_php_error = true;
-        echo '<span style="color: red;">Not found</span>';
-    }
-
-    // Find language files
-    echo "\nSearching for language files... ";
-    if ( is_readable($geshi_lang_path . 'css-gen.cfg') )
-    {
-
-        echo '<span style="color: green;">Found at ' . realpath($geshi_lang_path) . '</span>';
-    }
-    else
-    {
-        ++$errors;
-        $no_lang_dir_error = true;
-        echo '<span style="color: red;">Not found</span>';
-    }
-    echo "</pre>\n";
-
-    if ( $errors > 0 )
-    {
-        // We're gonna have to ask for the paths...
-        echo 'Unfortunately CSSGen could not detect the following paths. Please input them and press &quot;submit&quot; to try again.';
-        echo "
-<form action=\"cssgen.php\" method=\"post\">";
-        if ( $no_geshi_dot_php_error )
-        {
-            echo "
-<br />geshi.php: <input type=\"text\" name=\"geshi-path\" value=\"" . realpath('../geshi.php') . "\" size=\"50\" />";
-        }
-        else
-        {
-            echo '<input type="hidden" name="geshi-path" value="' . htmlspecialchars($geshi_path) . '" />';
-        }
-        if ( $no_lang_dir_error )
-        {
-            echo "
-<br />language files directory: <input type=\"text\" name=\"geshi-lang-path\" value=\"" . realpath('../geshi/') . "/\" size=\"50\" /> (should have a trailing slash)";
-        }
-        else
-        {
-            echo '<input type="hidden" name="geshi-lang-path" value="' . $geshi_lang_path . '" />';
-        }
-
-        echo "
-<br /><input type=\"submit\" value=\"Search\" /></form>";
-    }
-    else
-    {
-        // no errors - echo continue form
-        echo 'Everything seems to be detected successfully. Use the button to continue.
-<br /><br /><form action="cssgen.php?step=2" method="post">
-<input type="hidden" name="geshi-path" value="' . realpath($geshi_path) . '" /><input type="hidden" name="geshi-lang-path" value="' . realpath($geshi_lang_path) . '" />
-<input type="submit" value="Step 2" />';
-    }
-
-    make_footer();
-}
-// Step 2
-elseif ( $step == 2 )
-{
-    make_header('Step 2');
-
-    $geshi_path = get_var('geshi-path');
-    $geshi_lang_path = get_var('geshi-lang-path');
-
-    $dh = opendir($geshi_lang_path);
-    $lang_files = array();
-    $file = readdir($dh);
-    while ( $file !== false )
-    {
-        if ( $file == '.' || $file == '..' || $file == 'CVS' || $file == 'css-gen.cfg' )
-        {
-            $file = readdir($dh);
-            continue;
-        }
-        $lang_files[] = $file;
-        $file = readdir($dh);
-    }
-    closedir($dh);
-    sort($lang_files);
-
-    // Now installed languages are in $lang_files
-
-    echo '<form action="cssgen.php?step=3" method="post" id="step2">
-What languages are you wanting to make this stylesheet for?<br /><br />
-Detected languages:<br />';
-
-    foreach ( $lang_files as $lang )
-    {
-        $lang = substr($lang, 0, strpos($lang, '.'));
-        if ($lang) {
-            echo "<input type=\"checkbox\" name=\"langs[$lang]\" checked=\"checked\" />&nbsp;$lang<br />\n";
-        }
-    }
-
-    echo "Select: <a href=\"javascript:select('true')\">All</a>, <a href=\"javascript:select('false')\">None</a>, <a href=\"javascript:select('invert')\">Invert</a><br />\n";
-
-    echo 'If you\'d like any other languages not detected here to be supported, please enter
-them here, one per line:<br /><textarea rows="4" cols="20" name="extra-langs"></textarea><br />
-';
-
-    echo '<br />Styles:
-<table>
-    <tr><th>Style for the overall code block:</th><td><input type="text" name="overall" value="border: 1px dotted #a0a0a0; font-family: \'Courier New\', Courier, monospace; background-color: #f0f0f0; color: #0000bb;" /></td></tr>
-    <tr><th>Default Styles</th><td><input type="text" name="default-styles" value="font-weight:normal;background:transparent;color:#000; padding-left: 5px;" /></td></tr>
-    <tr><th>Keywords I (if, do, while etc)</th><td><input type="text" name="keywords-1" value="color: #a1a100;" /></td></tr>
-    <tr><th>Keywords II (null, true, false etc)</th><td><input type="text" name="keywords-2" value="color: #000; font-weight: bold;" /></td></tr>
-    <tr><th>Inbuilt Functions (echo, print etc)</th><td><input type="text" name="keywords-3" value="color: #000066;" /></td></tr>
-    <tr><th>Data Types (int, boolean etc)</th><td><input type="text" name="keywords-4" value="color: #f63333;" /></td></tr>
-
-    <tr><th>Comments (//, <!--  --> etc)</th><td><input type="text" name="comments" value="color: #808080;" /></td></tr>
-    <tr><th>Escaped Characters (\n, \t etc)</th><td><input type="text" name="escaped-chars" value="color: #000033; font-weight: bold;" /></td></tr>
-    <tr><th>Brackets ( ([{}]) etc)</th><td><input type="text" name="brackets" value="color: #66cc66;" /></td></tr>
-    <tr><th>Strings ("foo" etc)</th><td><input type="text" name="strings" value="color: #ff0000;" /></td></tr>
-    <tr><th>Numbers (1, -54, 2.5 etc)</th><td><input type="text" name="numbers" value="color: #ff33ff;" /></td></tr>
-    <tr><th>Methods (Foo.bar() etc)</th><td><input type="text" name="methods" value="color: #006600;" /></td></tr>
-</table>';
-
-    echo '<input type="hidden" name="geshi-path" value="' . realpath($geshi_path) . '" /><input type="hidden" name="geshi-lang-path" value="' . realpath($geshi_lang_path) . '" />
-<input type="submit" value="Step 3" /></form>';
-
-    make_footer();
-}
-// Step 3
-elseif ( $step == 3 )
-{
-    make_header('Step 3');
-    echo '<p>Here is your completed stylesheet. Note that it may not be perfect - no regular expression styles are included for one thing,
-you\'ll have to add those yourself (php and xml are just two languages that use them), and line numbers are not included, however
-it includes most of the basic information.</p>';
-
-    // Make the stylesheet
-    $part_selector_1 = '';
-    $part_selector_2 = '';
-    $part_selector_3 = '';
-
-    $langs = get_var('langs');
-    $extra_langs = trim(get_var('extra-langs'));
-    if ( $extra_langs != '' )
-    {
-        $l = explode("\r\n", $extra_langs);
-        foreach ( $l as $lng )
-        {
-            $langs[$lng] = true;
-        }
-    }
-
-
-    foreach ( $langs as $lang => $dummy )
-    {
-        $part_selector_1 .= ".$lang {PART}, ";
-        $part_selector_2 .= ".$lang {PART1}, .$lang {PART2}, ";
-        $part_selector_3 .= ".$lang {PART1}, .$lang {PART2}, .$lang {PART3}, ";
-    }
-    $part_selector_1 = substr($part_selector_1, 0, -2);
-    $part_selector_2 = substr($part_selector_2, 0, -2);
-    $part_selector_3 = substr($part_selector_3, 0, -2);
-
-
-    $default_styles = get_var('default-styles');
-    $ol_selector = str_replace('{PART}', 'ol', $part_selector_1);
-    $overall_styles = get_var('overall');
-    $overall_selector = str_replace('{PART}', '', $part_selector_1);
-
-    $stylesheet = "/* GeSHi (c) Nigel McNie 2004 (http://qbnz.com/highlighter) */";
-
-    if ( $overall != '' )
-    {
-        $stylesheet .= "\n$overall_selector {{$overall_styles}}";
-    }
-    if ( $default_styles != '' )
-    {
-        $default_selector = str_replace(array('{PART1}', '{PART2}'), array('.de1', '.de2'), $part_selector_2);
-        $stylesheet .= "\n$default_selector {{$default_styles}}";
-    }
-
-    // Do keywords
-    $keywords_1 = get_var('keywords-1');
-    $keyword_selector_1 = str_replace('{PART}', '.kw1', $part_selector_1);
-    if ( $keywords_1 != '' )
-    {
-        $stylesheet .= "\n$keyword_selector_1 {{$keywords_1}}";
-    }
-
-    $keywords_2 = get_var('keywords-2');
-    $keyword_selector_2 = str_replace('{PART}', '.kw2', $part_selector_1);
-    if ( $keywords_2 != '' )
-    {
-        $stylesheet .= "\n$keyword_selector_2 {{$keywords_2}}";
-    }
-
-    $keywords_3 = get_var('keywords-3');
-    $keyword_selector_3 = str_replace('{PART}', '.kw3', $part_selector_1);
-    if ( $keywords_3 != '' )
-    {
-        $stylesheet .= "\n$keyword_selector_3 {{$keywords_3}}";
-    }
-
-    $keywords_4 = get_var('keywords-4');
-    $keyword_selector_4 = str_replace('{PART}', '.kw4', $part_selector_1);
-    if ( $keywords_4 != '' )
-    {
-        $stylesheet .= "\n$keyword_selector_4 {{$keywords_4}}";
-    }
-
-    // Do other lexics
-    $comments = get_var('comments');
-    $comment_selector = str_replace(array('{PART1}', '{PART2}', '{PART3}'), array('.co1', '.co2', '.coMULTI'), $part_selector_3);
-    if ( $comments != '' )
-    {
-        $stylesheet .= "\n$comment_selector {{$comments}}";
-    }
-
-    $esc = get_var('escaped-chars');
-    $esc_selector = str_replace('{PART}', '.es0', $part_selector_1);
-    if ( $esc != '' )
-    {
-        $stylesheet .= "\n$esc_selector {{$esc}}";
-    }
-
-    $brackets = get_var('brackets');
-    $brk_selector = str_replace('{PART}', '.br0', $part_selector_1);
-    if ( $brackets != '' )
-    {
-        $stylesheet .= "\n$brk_selector {{$brackets}}";
-    }
-
-    $strings = get_var('strings');
-    $string_selector = str_replace('{PART}', '.st0', $part_selector_1);
-    if ( $strings != '' )
-    {
-        $stylesheet .= "\n$string_selector {{$strings}}";
-    }
-
-    $numbers = get_var('numbers');
-    $num_selector = str_replace('{PART}', '.nu0', $part_selector_1);
-    if ( $numbers != '' )
-    {
-        $stylesheet .= "\n$num_selector {{$numbers}}";
-    }
-
-    $methods = get_var('methods');
-    $method_selector = str_replace('{PART}', '.me0', $part_selector_1);
-    if ( $methods != '' )
-    {
-        $stylesheet .= "\n$method_selector {{$methods}}";
-    }
-
-    echo "<pre>$stylesheet</pre>";
-
-    make_footer();
-}
-
-?>

examples/includes/geshi/contrib/cssgen2.php

@@ -1,59 +0,0 @@
-<?php
-/**
- *  A simple script which outputs the CSS classes for all languages
- *  supported by GeSHi. You can access it directly to download
- *  the CSS file. On *NIX you can also do a simple `php cssgen.php > geshi.css`.
- *
- *   This file is part of GeSHi.
- *
- *  GeSHi is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License as published by
- *  the Free Software Foundation; either version 2 of the License, or
- *  (at your option) any later version.
- *
- *  GeSHi is distributed in the hope that it will be useful,
- *  but WITHOUT ANY WARRANTY; without even the implied warranty of
- *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *  GNU General Public License for more details.
- *
- *  You should have received a copy of the GNU General Public License
- *  along with GeSHi; if not, write to the Free Software
- *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- *
- * @package    geshi
- * @subpackage contrib
- * @author     revulo <revulon@gmail.com>
- * @copyright  2008 revulo
- * @license    http://gnu.org/copyleft/gpl.html GNU GPL
- *
- */
-
-require dirname(dirname(__FILE__)) . DIRECTORY_SEPARATOR . 'geshi.php';
-$geshi = new GeSHi;
-
-$languages = array();
-if ($handle = opendir($geshi->language_path)) {
-    while (($file = readdir($handle)) !== false) {
-        $pos = strpos($file, '.');
-        if ($pos > 0 && substr($file, $pos) == '.php') {
-            $languages[] = substr($file, 0, $pos);
-        }
-    }
-    closedir($handle);
-}
-sort($languages);
-
-header('Content-Type: application/octet-stream');
-header('Content-Disposition: attachment; filename="geshi.css"');
-
-echo "/**\n".
-     " * GeSHi (C) 2004 - 2007 Nigel McNie, 2007 - 2008 Benny Baumann\n" .
-     " * (http://qbnz.com/highlighter/ and http://geshi.org/)\n".
-     " */\n";
-
-foreach ($languages as $language) {
-    $geshi->set_language($language);
-    // note: the false argument is required for stylesheet generators, see API documentation
-    $css = $geshi->get_stylesheet(false);
-    echo preg_replace('/^\/\*\*.*?\*\//s', '', $css);
-}

examples/includes/geshi/contrib/example.php

@@ -1,217 +0,0 @@
-<?php
-/**
- * GeSHi example script
- *
- * Just point your browser at this script (with geshi.php in the parent directory,
- * and the language files in subdirectory "../geshi/")
- *
- * @author  Nigel McNie
- * @version $Id: example.php 1512 2008-07-21 21:05:40Z benbe $
- */
-header('Content-Type: text/html; charset=utf-8');
-
-error_reporting(E_ALL);
-
-// Rudimentary checking of where GeSHi is. In a default install it will be in ../, but
-// it could be in the current directory if the include_path is set. There's nowhere else
-// we can reasonably guess.
-if (is_readable('../geshi.php')) {
-    $path = '../';
-} elseif (is_readable('geshi.php')) {
-    $path = './';
-} else {
-    die('Could not find geshi.php - make sure it is in your include path!');
-}
-require $path . 'geshi.php';
-
-$fill_source = false;
-if (isset($_POST['submit'])) {
-    if (get_magic_quotes_gpc()) {
-        $_POST['source'] = stripslashes($_POST['source']);
-    }
-    if (!strlen(trim($_POST['source']))) {
-        $_POST['language'] = preg_replace('#[^a-zA-Z0-9\-_]#', '', $_POST['language']);
-        $_POST['source'] = implode('', @file($path . 'geshi/' . $_POST['language'] . '.php'));
-        $_POST['language'] = 'php';
-    } else {
-        $fill_source = true;
-    }
-
-    // Here's a free demo of how GeSHi works.
-
-    // First the initialisation: source code to highlight and the language to use. Make sure
-    // you sanitise correctly if you use $_POST of course - this very script has had a security
-    // advisory against it in the past because of this. Please try not to use this script on a
-    // live site.
-    $geshi = new GeSHi($_POST['source'], $_POST['language']);
-
-    // Use the PRE_VALID header. This means less output source since we don't have to output &nbsp;
-    // everywhere. Of course it also means you can't set the tab width.
-    // HEADER_PRE_VALID puts the <pre> tag inside the list items (<li>) thus producing valid HTML markup.
-    // HEADER_PRE puts the <pre> tag around the list (<ol>) which is invalid in HTML 4 and XHTML 1
-    // HEADER_DIV puts a <div> tag arount the list (valid!) but needs to replace whitespaces with &nbsp
-    //            thus producing much larger overhead. You can set the tab width though.
-    $geshi->set_header_type(GESHI_HEADER_PRE_VALID);
-
-    // Enable CSS classes. You can use get_stylesheet() to output a stylesheet for your code. Using
-    // CSS classes results in much less output source.
-    $geshi->enable_classes();
-
-    // Enable line numbers. We want fancy line numbers, and we want every 5th line number to be fancy
-    $geshi->enable_line_numbers(GESHI_FANCY_LINE_NUMBERS, 5);
-
-    // Set the style for the PRE around the code. The line numbers are contained within this box (not
-    // XHTML compliant btw, but if you are liberally minded about these things then you'll appreciate
-    // the reduced source output).
-    $geshi->set_overall_style('font: normal normal 90% monospace; color: #000066; border: 1px solid #d0d0d0; background-color: #f0f0f0;', false);
-
-    // Set the style for line numbers. In order to get style for line numbers working, the <li> element
-    // is being styled. This means that the code on the line will also be styled, and most of the time
-    // you don't want this. So the set_code_style reverts styles for the line (by using a <div> on the line).
-    // So the source output looks like this:
-    //
-    // <pre style="[set_overall_style styles]"><ol>
-    // <li style="[set_line_style styles]"><div style="[set_code_style styles]>...</div></li>
-    // ...
-    // </ol></pre>
-    $geshi->set_line_style('color: #003030;', 'font-weight: bold; color: #006060;', true);
-    $geshi->set_code_style('color: #000020;', true);
-
-    // Styles for hyperlinks in the code. GESHI_LINK for default styles, GESHI_HOVER for hover style etc...
-    // note that classes must be enabled for this to work.
-    $geshi->set_link_styles(GESHI_LINK, 'color: #000060;');
-    $geshi->set_link_styles(GESHI_HOVER, 'background-color: #f0f000;');
-
-    // Use the header/footer functionality. This puts a div with content within the PRE element, so it is
-    // affected by the styles set by set_overall_style. So if the PRE has a border then the header/footer will
-    // appear inside it.
-    $geshi->set_header_content('<SPEED> <TIME> GeSHi &copy; 2004-2007, Nigel McNie, 2007-2008 Benny Baumann. View source of example.php for example of using GeSHi');
-    $geshi->set_header_content_style('font-family: sans-serif; color: #808080; font-size: 70%; font-weight: bold; background-color: #f0f0ff; border-bottom: 1px solid #d0d0d0; padding: 2px;');
-
-    // You can use <TIME> and <VERSION> as placeholders
-    $geshi->set_footer_content('Parsed in <TIME> seconds at <SPEED>, using GeSHi <VERSION>');
-    $geshi->set_footer_content_style('font-family: sans-serif; color: #808080; font-size: 70%; font-weight: bold; background-color: #f0f0ff; border-top: 1px solid #d0d0d0; padding: 2px;');
-} else {
-    // make sure we don't preselect any language
-    $_POST['language'] = null;
-}
-?>
-<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Strict//EN"
-     "http://www.w3.org/TR/xhtml1/DTD/xhtml1-strict.dtd">
-<html xmlns="http://www.w3.org/1999/xhtml" xml:lang="en" lang="en">
-<head>
-    <title>GeSHi examples</title>
-    <style type="text/css">
-    <!--
-    <?php
-    if (isset($_POST['submit'])) {
-        // Output the stylesheet. Note it doesn't output the <style> tag
-        echo $geshi->get_stylesheet(true);
-    }
-    ?>
-    html {
-        background-color: #f0f0f0;
-    }
-    body {
-        font-family: Verdana, Arial, sans-serif;
-        margin: 10px;
-        border: 2px solid #e0e0e0;
-        background-color: #fcfcfc;
-        padding: 5px;
-    }
-    h2 {
-        margin: .1em 0 .2em .5em;
-        border-bottom: 1px solid #b0b0b0;
-        color: #b0b0b0;
-        font-weight: normal;
-        font-size: 150%;
-    }
-    h3 {
-        margin: .1em 0 .2em .5em;
-        color: #b0b0b0;
-        font-weight: normal;
-        font-size: 120%;
-    }
-    #footer {
-        text-align: center;
-        font-size: 80%;
-        color: #a9a9a9;
-    }
-    #footer a {
-        color: #9999ff;
-    }
-    textarea {
-        border: 1px solid #b0b0b0;
-        font-size: 90%;
-        color: #333;
-        margin-left: 20px;
-    }
-    select, input {
-        margin-left: 20px;
-    }
-    p {
-        font-size: 90%;
-        margin-left: .5em;
-    }
-    -->
-    </style>
-</head>
-<body>
-<h2>GeSHi Example Script</h2>
-<p>To use this script, make sure that <strong>geshi.php</strong> is in the parent directory or in your
-include_path, and that the language files are in a subdirectory of GeSHi's directory called <strong>geshi/</strong>.</p>
-<p>Enter your source and a language to highlight the source in and submit, or just choose a language to
-have that language file highlighted in PHP.</p>
-<?php
-if (isset($_POST['submit'])) {
-    // The fun part :)
-    echo $geshi->parse_code();
-    echo '<hr />';
-}
-?>
-<form action="<?php echo basename($_SERVER['PHP_SELF']); ?>" method="post">
-<h3>Source to highlight</h3>
-<p>
-<textarea rows="10" cols="60" name="source" id="source"><?php echo $fill_source ? htmlspecialchars($_POST['source']) : '' ?></textarea>
-</p>
-<h3>Choose a language</h3>
-<p>
-<select name="language" id="language">
-<?php
-if (!($dir = @opendir(dirname(__FILE__) . '/geshi'))) {
-    if (!($dir = @opendir(dirname(__FILE__) . '/../geshi'))) {
-        echo '<option>No languages available!</option>';
-    }
-}
-$languages = array();
-while ($file = readdir($dir)) {
-    if ( $file[0] == '.' || strpos($file, '.', 1) === false) {
-        continue;
-    }
-    $lang = substr($file, 0,  strpos($file, '.'));
-    $languages[] = $lang;
-}
-closedir($dir);
-sort($languages);
-foreach ($languages as $lang) {
-    if (isset($_POST['language']) && $_POST['language'] == $lang) {
-        $selected = 'selected="selected"';
-    } else {
-        $selected = '';
-    }
-    echo '<option value="' . $lang . '" '. $selected .'>' . $lang . "</option>\n";
-}
-
-?>
-</select>
-</p>
-<p>
-<input type="submit" name="submit" value="Highlight Source" />
-<input type="submit" name="clear" onclick="document.getElementById('source').value='';document.getElementById('language').value='';return false" value="clear" />
-</p>
-</form>
-<div id="footer">GeSHi &copy; Nigel McNie, 2004, released under the GNU GPL<br />
-For a better demonstration, check out the <a href="http://qbnz.com/highlighter/demo.php">online demo</a>
-</div>
-</body>
-</html>

examples/includes/geshi/contrib/langcheck.php

@@ -1,666 +0,0 @@
-<?php
-/**
- * GeSHi example script
- *
- * Just point your browser at this script (with geshi.php in the parent directory,
- * and the language files in subdirectory "../geshi/")
- *
- * @author  Nigel McNie
- * @version $Id: langcheck.php 1971 2008-12-25 15:14:14Z benbe $
- */
-header('Content-Type: text/html; charset=utf-8');
-
-set_time_limit(0);
-error_reporting(E_ALL);
-$time_start = explode(' ', microtime());
-
-define ('TYPE_NOTICE', 0);
-define ('TYPE_WARNING', 1);
-define ('TYPE_ERROR', 2);
-
-$error_abort = false;
-$error_cache = array();
-function output_error_cache(){
-    global $error_cache, $error_abort;
-
-    if(count($error_cache)) {
-        echo "<span style=\"color: #F00; font-weight: bold;\">Failed</span><br />";
-        echo "<ol>\n";
-        foreach($error_cache as $error_msg) {
-            echo "<li>";
-            switch($error_msg['t']) {
-                case TYPE_NOTICE:
-                    echo "<span style=\"color: #080; font-weight: bold;\">NOTICE:</span>";
-                    break;
-                case TYPE_WARNING:
-                    echo "<span style=\"color: #CC0; font-weight: bold;\">WARNING:</span>";
-                    break;
-                case TYPE_ERROR:
-                    echo "<span style=\"color: #F00; font-weight: bold;\">ERROR:</span>";
-                    break;
-            }
-            echo " " . $error_msg['m'] . "</li>";
-        }
-        echo "</ol>\n";
-    } else {
-        echo "<span style=\"color: #080; font-weight: bold;\">OK</span><br />";
-    }
-    echo "\n";
-
-    $error_cache = array();
-}
-
-function report_error($type, $message) {
-    global $error_cache, $error_abort;
-
-    $error_cache[] = array('t' => $type, 'm' => $message);
-    if(TYPE_ERROR == $type) {
-        $error_abort = true;
-    }
-}
-
-?>
-<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Strict//EN"
-     "http://www.w3.org/TR/xhtml1/DTD/xhtml1-strict.dtd">
-<html xmlns="http://www.w3.org/1999/xhtml" xml:lang="en" lang="en">
-<head>
-    <title>GeSHi Language File Validation Script</title>
-    <style type="text/css">
-    <!--
-    html {
-        background-color: #f0f0f0;
-    }
-    body {
-        font-family: Verdana, Arial, sans-serif;
-        margin: 10px;
-        border: 2px solid #e0e0e0;
-        background-color: #fcfcfc;
-        padding: 5px;
-        font-size: 10pt;
-    }
-    h2 {
-        margin: .1em 0 .2em .5em;
-        border-bottom: 1px solid #b0b0b0;
-        color: #b0b0b0;
-        font-weight: normal;
-        font-size: 150%;
-    }
-    h3 {
-        margin: .1em 0 .2em .5em;
-        color: #b0b0b0;
-        font-weight: normal;
-        font-size: 120%;
-    }
-    #footer {
-        text-align: center;
-        font-size: 80%;
-        color: #a9a9a9;
-    }
-    #footer a {
-        color: #9999ff;
-    }
-    textarea {
-        border: 1px solid #b0b0b0;
-        font-size: 90%;
-        color: #333;
-        margin-left: 20px;
-    }
-    select, input {
-        margin-left: 20px;
-    }
-    p {
-        font-size: 90%;
-        margin-left: .5em;
-    }
-    -->
-    </style>
-</head>
-<body>
-<h2>GeSHi Language File Validation Script</h2>
-<p>To use this script, make sure that <strong>geshi.php</strong> is in the
-parent directory or in your include_path, and that the language files are in a
-subdirectory of GeSHi's directory called <strong>geshi/</strong>.</p>
-<p>Everything else will be done by this script automatically. After the script
-finished you should see messages of what could cause trouble with GeSHi or where
-your language files can be improved. Please be patient, as this might take some time.</p>
-
-<ol>
-<li>Checking where to find GeSHi installation ... <?php
-// Rudimentary checking of where GeSHi is. In a default install it will be in ../, but
-// it could be in the current directory if the include_path is set. There's nowhere else
-// we can reasonably guess.
-if (is_readable('../geshi.php')) {
-    $path = '../';
-} elseif (is_readable('geshi.php')) {
-    $path = './';
-} else {
-    report_error(TYPE_ERROR, 'Could not find geshi.php - make sure it is in your include path!');
-}
-
-if(!$error_abort) {
-    require $path . 'geshi.php';
-
-    if(!class_exists('GeSHi')) {
-        report_error(TYPE_ERROR, 'The GeSHi class was not found, although it seemed we loaded the correct file!');
-    }
-}
-
-if(!$error_abort) {
-    if(!defined('GESHI_LANG_ROOT')) {
-        report_error(TYPE_ERROR, 'There\'s no information present on where to find the language files!');
-    } else if(!is_dir(GESHI_LANG_ROOT)) {
-        report_error(TYPE_ERROR, 'The path "'.GESHI_LANG_ROOT.'" given, does not ressemble a directory!');
-    } else if(!is_readable(GESHI_LANG_ROOT)) {
-        report_error(TYPE_ERROR, 'The path "'.GESHI_LANG_ROOT.'" is not readable to this script!');
-    }
-}
-
-output_error_cache();
-
-if(!$error_abort) {
-    echo "</li>\n<li>Listing available language files ... ";
-
-    if (!($dir = @opendir(GESHI_LANG_ROOT))) {
-        report_error(TYPE_ERROR, 'Error requesting listing for available language files!');
-    }
-
-    $languages = array();
-
-    if(!$error_abort) {
-        while ($file = readdir($dir)) {
-            if (!$file || $file[0] == '.' || strpos($file, '.') === false) {
-                continue;
-            }
-            $lang = substr($file, 0,  strpos($file, '.'));
-            $languages[] = $lang;
-        }
-        closedir($dir);
-    }
-
-    $languages = array_unique($languages);
-    sort($languages);
-
-    if(!count($languages)) {
-        report_error(TYPE_WARNING, 'Unable to locate any usable language files in "'.GESHI_LANG_ROOT.'"!');
-    }
-
-    output_error_cache();
-}
-
-if (isset($_REQUEST['show']) && in_array($_REQUEST['show'], $languages)) {
-    $languages = array($_REQUEST['show']);
-}
-
-if(!$error_abort) {
-    foreach ($languages as $lang) {
-        echo "</li>\n<li>Validating language file for '$lang' ... ";
-
-        $langfile = GESHI_LANG_ROOT . $lang . '.php';
-
-        unset($language_data);
-
-        if(!is_file($langfile)) {
-            report_error(TYPE_ERROR, 'The path "' .$langfile. '" does not ressemble a regular file!');
-        } else if(!is_readable($langfile)) {
-            report_error(TYPE_ERROR, 'Cannot read file "' .$langfile. '"!');
-        } else {
-            $langfile_content = file_get_contents($langfile);
-            if(preg_match("/\?>(?:\r?\n|\r(?!\n)){2,}\Z/", $langfile_content)) {
-                report_error(TYPE_ERROR, 'Language file contains trailing empty lines at EOF!');
-            }
-            if(!preg_match("/\?>(?:\r?\n|\r(?!\n))?\Z/", $langfile_content)) {
-                report_error(TYPE_ERROR, 'Language file contains no PHP end marker at EOF!');
-            }
-            if(preg_match("/\t/", $langfile_content)) {
-                report_error(TYPE_NOTICE, 'Language file contains unescaped tabulator chars (probably for indentation)!');
-            }
-            if(preg_match('/^(?:    )*(?!    )(?! \*) /m', $langfile_content)) {
-                report_error(TYPE_NOTICE, 'Language file contains irregular indentation (other than 4 spaces per indentation level)!');
-            }
-
-            if(!preg_match("/\/\*\*((?!\*\/).)*?Author:((?!\*\/).)*?\*\//s", $langfile_content)) {
-                report_error(TYPE_WARNING, 'Language file does not contain a specification of an author!');
-            }
-            if(!preg_match("/\/\*\*((?!\*\/).)*?Copyright:((?!\*\/).)*?\*\//s", $langfile_content)) {
-                report_error(TYPE_WARNING, 'Language file does not contain a specification of the copyright!');
-            }
-            if(!preg_match("/\/\*\*((?!\*\/).)*?Release Version:((?!\*\/).)*?\*\//s", $langfile_content)) {
-                report_error(TYPE_WARNING, 'Language file does not contain a specification of the release version!');
-            }
-            if(!preg_match("/\/\*\*((?!\*\/).)*?Date Started:((?!\*\/).)*?\*\//s", $langfile_content)) {
-                report_error(TYPE_WARNING, 'Language file does not contain a specification of the date it was started!');
-            }
-            if(!preg_match("/\/\*\*((?!\*\/).)*?This file is part of GeSHi\.((?!\*\/).)*?\*\//s", $langfile_content)) {
-                report_error(TYPE_WARNING, 'Language file does not state that it belongs to GeSHi!');
-            }
-            if(!preg_match("/\/\*\*((?!\*\/).)*?language file for GeSHi\.((?!\*\/).)*?\*\//s", $langfile_content)) {
-                report_error(TYPE_WARNING, 'Language file does not state that it is a language file for GeSHi!');
-            }
-            if(!preg_match("/\/\*\*((?!\*\/).)*?GNU General Public License((?!\*\/).)*?\*\//s", $langfile_content)) {
-                report_error(TYPE_WARNING, 'Language file does not state that it is provided under the terms of the GNU GPL!');
-            }
-
-            unset($langfile_content);
-
-            include $langfile;
-
-            if(!isset($language_data)) {
-                report_error(TYPE_ERROR, 'Language file does not contain a $language_data structure to check!');
-            } else if (!is_array($language_data)) {
-                report_error(TYPE_ERROR, 'Language file contains a $language_data structure which is not an array!');
-            }
-        }
-
-        if(!$error_abort) {
-            if(!isset($language_data['LANG_NAME'])) {
-                report_error(TYPE_ERROR, 'Language file contains no $language_data[\'LANG_NAME\'] specification!');
-            } else if (!is_string($language_data['LANG_NAME'])) {
-                report_error(TYPE_ERROR, 'Language file contains a $language_data[\'LANG_NAME\'] specification which is not a string!');
-            }
-
-            if(!isset($language_data['COMMENT_SINGLE'])) {
-                report_error(TYPE_ERROR, 'Language file contains no $language_data[\'COMMENT_SIGNLE\'] structure to check!');
-            } else if (!is_array($language_data['COMMENT_SINGLE'])) {
-                report_error(TYPE_ERROR, 'Language file contains a $language_data[\'COMMENT_SINGLE\'] structure which is not an array!');
-            }
-
-            if(!isset($language_data['COMMENT_MULTI'])) {
-                report_error(TYPE_ERROR, 'Language file contains no $language_data[\'COMMENT_MULTI\'] structure to check!');
-            } else if (!is_array($language_data['COMMENT_MULTI'])) {
-                report_error(TYPE_ERROR, 'Language file contains a $language_data[\'COMMENT_MULTI\'] structure which is not an array!');
-            }
-
-            if(isset($language_data['COMMENT_REGEXP'])) {
-                if (!is_array($language_data['COMMENT_REGEXP'])) {
-                    report_error(TYPE_ERROR, 'Language file contains a $language_data[\'COMMENT_REGEXP\'] structure which is not an array!');
-                }
-            }
-
-            if(!isset($language_data['QUOTEMARKS'])) {
-                report_error(TYPE_ERROR, 'Language file contains no $language_data[\'QUOTEMARKS\'] structure to check!');
-            } else if (!is_array($language_data['QUOTEMARKS'])) {
-                report_error(TYPE_ERROR, 'Language file contains a $language_data[\'QUOTEMARKS\'] structure which is not an array!');
-            }
-
-            if(isset($language_data['HARDQUOTE'])) {
-                if (!is_array($language_data['HARDQUOTE'])) {
-                    report_error(TYPE_ERROR, 'Language file contains a $language_data[\'HARDQUOTE\'] structure which is not an array!');
-                }
-            }
-
-            if(!isset($language_data['ESCAPE_CHAR'])) {
-                report_error(TYPE_ERROR, 'Language file contains no $language_data[\'ESCAPE_CHAR\'] specification to check!');
-            } else if (!is_string($language_data['ESCAPE_CHAR'])) {
-                report_error(TYPE_ERROR, 'Language file contains a $language_data[\'ESCAPE_CHAR\'] specification which is not a string!');
-            } else if (1 < strlen($language_data['ESCAPE_CHAR'])) {
-                report_error(TYPE_ERROR, 'Language file contains a $language_data[\'ESCAPE_CHAR\'] specification is not empty or exactly one char!');
-            }
-
-            if(!isset($language_data['CASE_KEYWORDS'])) {
-                report_error(TYPE_ERROR, 'Language file contains no $language_data[\'CASE_KEYWORDS\'] specification!');
-            } else if (!is_int($language_data['CASE_KEYWORDS'])) {
-                report_error(TYPE_ERROR, 'Language file contains a $language_data[\'CASE_KEYWORDS\'] specification which is not an integer!');
-            } else if (GESHI_CAPS_NO_CHANGE != $language_data['CASE_KEYWORDS'] &&
-                GESHI_CAPS_LOWER != $language_data['CASE_KEYWORDS'] &&
-                GESHI_CAPS_UPPER != $language_data['CASE_KEYWORDS']) {
-                report_error(TYPE_ERROR, 'Language file contains a $language_data[\'CASE_KEYWORDS\'] specification which is neither of GESHI_CAPS_NO_CHANGE, GESHI_CAPS_LOWER nor GESHI_CAPS_UPPER!');
-            }
-
-            if(!isset($language_data['KEYWORDS'])) {
-                report_error(TYPE_ERROR, 'Language file contains no $language_data[\'KEYWORDS\'] structure to check!');
-            } else if (!is_array($language_data['KEYWORDS'])) {
-                report_error(TYPE_ERROR, 'Language file contains a $language_data[\'KEYWORDS\'] structure which is not an array!');
-            } else {
-                foreach($language_data['KEYWORDS'] as $kw_key => $kw_value) {
-                    if(!is_integer($kw_key)) {
-                        report_error(TYPE_WARNING, "Language file contains an key '$kw_key' in \$language_data['KEYWORDS'] that is not integer!");
-                    } else if (!is_array($kw_value)) {
-                        report_error(TYPE_ERROR, "Language file contains a \$language_data['CASE_SENSITIVE']['$kw_value'] structure which is not an array!");
-                    }
-                }
-            }
-
-            if(!isset($language_data['SYMBOLS'])) {
-                report_error(TYPE_ERROR, 'Language file contains no $language_data[\'SYMBOLS\'] structure to check!');
-            } else if (!is_array($language_data['SYMBOLS'])) {
-                report_error(TYPE_ERROR, 'Language file contains a $language_data[\'SYMBOLS\'] structure which is not an array!');
-            }
-
-            if(!isset($language_data['CASE_SENSITIVE'])) {
-                report_error(TYPE_ERROR, 'Language file contains no $language_data[\'CASE_SENSITIVE\'] structure to check!');
-            } else if (!is_array($language_data['CASE_SENSITIVE'])) {
-                report_error(TYPE_ERROR, 'Language file contains a $language_data[\'CASE_SENSITIVE\'] structure which is not an array!');
-            } else {
-                foreach($language_data['CASE_SENSITIVE'] as $cs_key => $cs_value) {
-                    if(!is_integer($cs_key)) {
-                        report_error(TYPE_WARNING, "Language file contains an key '$cs_key' in \$language_data['CASE_SENSITIVE'] that is not integer!");
-                    } else if (!is_bool($cs_value)) {
-                        report_error(TYPE_ERROR, "Language file contains a Case Sensitivity specification for \$language_data['CASE_SENSITIVE']['$cs_value'] which is not a boolean!");
-                    }
-                }
-            }
-
-            if(!isset($language_data['URLS'])) {
-                report_error(TYPE_ERROR, 'Language file contains no $language_data[\'URLS\'] structure to check!');
-            } else if (!is_array($language_data['URLS'])) {
-                report_error(TYPE_ERROR, 'Language file contains a $language_data[\'URLS\'] structure which is not an array!');
-            } else {
-                foreach($language_data['URLS'] as $url_key => $url_value) {
-                    if(!is_integer($url_key)) {
-                        report_error(TYPE_WARNING, "Language file contains an key '$url_key' in \$language_data['URLS'] that is not integer!");
-                    } else if (!is_string($url_value)) {
-                        report_error(TYPE_ERROR, "Language file contains a Documentation URL specification for \$language_data['URLS']['$url_value'] which is not a string!");
-                    } else if (preg_match('#&([^;]*(=|$))#U', $url_value)) {
-                        report_error(TYPE_ERROR, "Language file contains unescaped ampersands (&amp;) in \$language_data['URLS']!");
-                    }
-                }
-            }
-
-            if(!isset($language_data['OOLANG'])) {
-                report_error(TYPE_ERROR, 'Language file contains no $language_data[\'OOLANG\'] specification!');
-            } else if (!is_int($language_data['OOLANG']) && !is_bool($language_data['OOLANG'])) {
-                report_error(TYPE_ERROR, 'Language file contains a $language_data[\'OOLANG\'] specification which is neither boolean nor integer!');
-            } else if (false !== $language_data['OOLANG'] &&
-                true !== $language_data['OOLANG'] &&
-                2 !== $language_data['OOLANG']) {
-                report_error(TYPE_ERROR, 'Language file contains a $language_data[\'OOLANG\'] specification which is neither of false, true or 2!');
-            }
-
-            if(!isset($language_data['OBJECT_SPLITTERS'])) {
-                report_error(TYPE_ERROR, 'Language file contains no $language_data[\'OBJECT_SPLITTERS\'] structure to check!');
-            } else if (!is_array($language_data['OBJECT_SPLITTERS'])) {
-                report_error(TYPE_ERROR, 'Language file contains a $language_data[\'OBJECT_SPLITTERS\'] structure which is not an array!');
-            }
-
-            if(!isset($language_data['REGEXPS'])) {
-                report_error(TYPE_ERROR, 'Language file contains no $language_data[\'REGEXPS\'] structure to check!');
-            } else if (!is_array($language_data['REGEXPS'])) {
-                report_error(TYPE_ERROR, 'Language file contains a $language_data[\'REGEXPS\'] structure which is not an array!');
-            }
-
-            if(!isset($language_data['STRICT_MODE_APPLIES'])) {
-                report_error(TYPE_ERROR, 'Language file contains no $language_data[\'STRICT_MODE_APPLIES\'] specification!');
-            } else if (!is_int($language_data['STRICT_MODE_APPLIES'])) {
-                report_error(TYPE_ERROR, 'Language file contains a $language_data[\'STRICT_MODE_APPLIES\'] specification which is not an integer!');
-            } else if (GESHI_MAYBE != $language_data['STRICT_MODE_APPLIES'] &&
-                GESHI_ALWAYS != $language_data['STRICT_MODE_APPLIES'] &&
-                GESHI_NEVER != $language_data['STRICT_MODE_APPLIES']) {
-                report_error(TYPE_ERROR, 'Language file contains a $language_data[\'STRICT_MODE_APPLIES\'] specification which is neither of GESHI_MAYBE, GESHI_ALWAYS nor GESHI_NEVER!');
-            }
-
-            if(!isset($language_data['SCRIPT_DELIMITERS'])) {
-                report_error(TYPE_ERROR, 'Language file contains no $language_data[\'SCRIPT_DELIMITERS\'] structure to check!');
-            } else if (!is_array($language_data['SCRIPT_DELIMITERS'])) {
-                report_error(TYPE_ERROR, 'Language file contains a $language_data[\'SCRIPT_DELIMITERS\'] structure which is not an array!');
-            }
-
-            if(!isset($language_data['HIGHLIGHT_STRICT_BLOCK'])) {
-                report_error(TYPE_ERROR, 'Language file contains no $language_data[\'HIGHLIGHT_STRICT_BLOCK\'] structure to check!');
-            } else if (!is_array($language_data['HIGHLIGHT_STRICT_BLOCK'])) {
-                report_error(TYPE_ERROR, 'Language file contains a $language_data[\'HIGHLIGHT_STRICT_BLOCK\'] structure which is not an array!');
-            }
-
-            if(isset($language_data['TAB_WIDTH'])) {
-                if (!is_int($language_data['TAB_WIDTH'])) {
-                    report_error(TYPE_ERROR, 'Language file contains a $language_data[\'TAB_WIDTH\'] specification which is not an integer!');
-                } else if (1 > $language_data['TAB_WIDTH']) {
-                    report_error(TYPE_ERROR, 'Language file contains a $language_data[\'TAB_WIDTH\'] specification which is less than 1!');
-                }
-            }
-
-            if(isset($language_data['PARSER_CONTROL'])) {
-                if (!is_array($language_data['PARSER_CONTROL'])) {
-                    report_error(TYPE_ERROR, 'Language file contains a $language_data[\'PARSER_CONTROL\'] structure which is not an array!');
-                }
-            }
-
-            if(!isset($language_data['STYLES'])) {
-                report_error(TYPE_ERROR, 'Language file contains no $language_data[\'STYLES\'] structure to check!');
-            } else if (!is_array($language_data['STYLES'])) {
-                report_error(TYPE_ERROR, 'Language file contains a $language_data[\'STYLES\'] structure which is not an array!');
-            } else {
-                $style_arrays = array('KEYWORDS', 'COMMENTS', 'ESCAPE_CHAR',
-                    'BRACKETS', 'STRINGS', 'NUMBERS', 'METHODS', 'SYMBOLS',
-                    'REGEXPS', 'SCRIPT');
-                foreach($style_arrays as $style_kind) {
-                    if(!isset($language_data['STYLES'][$style_kind])) {
-                        report_error(TYPE_ERROR, "Language file contains no \$language_data['STYLES']['$style_kind'] structure to check!");
-                    } else if (!is_array($language_data['STYLES'][$style_kind])) {
-                        report_error(TYPE_ERROR, "Language file contains a \$language_data['STYLES\']['$style_kind'] structure which is not an array!");
-                    } else {
-                        foreach($language_data['STYLES'][$style_kind] as $sk_key => $sk_value) {
-                            if(!is_int($sk_key) && ('COMMENTS' != $style_kind && 'MULTI' != $sk_key)
-                                && !(('STRINGS' == $style_kind || 'ESCAPE_CHAR' == $style_kind) && 'HARD' == $sk_key)) {
-                                report_error(TYPE_WARNING, "Language file contains an key '$sk_key' in \$language_data['STYLES']['$style_kind'] that is not integer!");
-                            } else if (!is_string($sk_value)) {
-                                report_error(TYPE_WARNING, "Language file contains a CSS specification for \$language_data['STYLES']['$style_kind'][$key] which is not a string!");
-                            }
-                        }
-                    }
-                }
-
-                unset($style_arrays);
-            }
-        }
-
-        if(!$error_abort) {
-            //Initial sanity checks survived? --> Let's dig deeper!
-            foreach($language_data['KEYWORDS'] as $key => $keywords) {
-                if(!isset($language_data['CASE_SENSITIVE'][$key])) {
-                    report_error(TYPE_ERROR, "Language file contains no \$language_data['CASE_SENSITIVE'] specification for keyword group $key!");
-                }
-                if(!isset($language_data['URLS'][$key])) {
-                    report_error(TYPE_ERROR, "Language file contains no \$language_data['URLS'] specification for keyword group $key!");
-                }
-                if(empty($keywords)) {
-                    report_error(TYPE_WARNING, "Language file contains an empty keyword list in \$language_data['KEYWORDS'] for group $key!");
-                }
-                foreach($keywords as $id => $kw) {
-                    if(!is_string($kw)) {
-                        report_error(TYPE_WARNING, "Language file contains an non-string entry at \$language_data['KEYWORDS'][$key][$id]!");
-                    } else if (!strlen($kw)) {
-                        report_error(TYPE_ERROR, "Language file contains an empty string entry at \$language_data['KEYWORDS'][$key][$id]!");
-                    } else if (preg_match('/^([\(\)\{\}\[\]\^=.,:;\-+\*\/%\$\"\'\?]|&[\w#]\w*;)+$/i', $kw)) {
-                        report_error(TYPE_NOTICE, "Language file contains an keyword ('$kw') at \$language_data['KEYWORDS'][$key][$id] which seems to be better suited for the symbols section!");
-                    }
-                }
-                if(count($keywords) != count(array_unique($keywords))) {
-                    $kw_diffs = array_count_values($keywords);
-                    foreach($kw_diffs as $kw => $kw_count) {
-                        if($kw_count > 1) {
-                            report_error(TYPE_WARNING, "Language file contains per-group duplicate keyword '$kw' in \$language_data['KEYWORDS'][$key]!");
-                        }
-                    }
-                }
-            }
-
-            $disallowed_before = "(?<![a-zA-Z0-9\$_\|\#;>|^&";
-            $disallowed_after = "(?![a-zA-Z0-9_\|%\\-&;";
-
-            foreach($language_data['KEYWORDS'] as $key => $keywords) {
-                foreach($language_data['KEYWORDS'] as $key2 => $keywords2) {
-                    if($key2 <= $key) {
-                        continue;
-                    }
-                    $kw_diffs = array_intersect($keywords, $keywords2);
-                    foreach($kw_diffs as $kw) {
-                        if(isset($language_data['PARSER_CONTROL']['KEYWORDS'])) {
-                            //Check the precondition\post-cindition for the involved keyword groups
-                            $g1_pre = $disallowed_before;
-                            $g2_pre = $disallowed_before;
-                            $g1_post = $disallowed_after;
-                            $g2_post = $disallowed_after;
-                            if(isset($language_data['PARSER_CONTROL']['KEYWORDS']['DISALLOWED_BEFORE'])) {
-                                $g1_pre = $language_data['PARSER_CONTROL']['KEYWORDS']['DISALLOWED_BEFORE'];
-                                $g2_pre = $language_data['PARSER_CONTROL']['KEYWORDS']['DISALLOWED_BEFORE'];
-                            }
-                            if(isset($language_data['PARSER_CONTROL']['KEYWORDS']['DISALLOWED_AFTER'])) {
-                                $g1_post = $language_data['PARSER_CONTROL']['KEYWORDS']['DISALLOWED_AFTER'];
-                                $g2_post = $language_data['PARSER_CONTROL']['KEYWORDS']['DISALLOWED_AFTER'];
-                            }
-
-                            if(isset($language_data['PARSER_CONTROL']['KEYWORDS'][$key]['DISALLOWED_BEFORE'])) {
-                                $g1_pre = $language_data['PARSER_CONTROL']['KEYWORDS'][$key]['DISALLOWED_BEFORE'];
-                            }
-                            if(isset($language_data['PARSER_CONTROL']['KEYWORDS'][$key]['DISALLOWED_AFTER'])) {
-                                $g1_post = $language_data['PARSER_CONTROL']['KEYWORDS'][$key]['DISALLOWED_AFTER'];
-                            }
-
-                            if(isset($language_data['PARSER_CONTROL']['KEYWORDS'][$key2]['DISALLOWED_BEFORE'])) {
-                                $g2_pre = $language_data['PARSER_CONTROL']['KEYWORDS'][$key2]['DISALLOWED_BEFORE'];
-                            }
-                            if(isset($language_data['PARSER_CONTROL']['KEYWORDS'][$key2]['DISALLOWED_AFTER'])) {
-                                $g2_post = $language_data['PARSER_CONTROL']['KEYWORDS'][$key2]['DISALLOWED_AFTER'];
-                            }
-
-                            if($g1_pre != $g2_pre || $g1_post != $g2_post) {
-                                continue;
-                            }
-                        }
-                        report_error(TYPE_WARNING, "Language file contains cross-group duplicate keyword '$kw' in \$language_data['KEYWORDS'][$key] and \$language_data['KEYWORDS'][$key2]!");
-                    }
-                }
-            }
-            foreach($language_data['CASE_SENSITIVE'] as $key => $keywords) {
-                if(!isset($language_data['KEYWORDS'][$key]) && $key != GESHI_COMMENTS) {
-                    report_error(TYPE_WARNING, "Language file contains an superfluous \$language_data['CASE_SENSITIVE'] specification for non-existing keyword group $key!");
-                }
-            }
-            foreach($language_data['URLS'] as $key => $keywords) {
-                if(!isset($language_data['KEYWORDS'][$key])) {
-                    report_error(TYPE_WARNING, "Language file contains an superfluous \$language_data['URLS'] specification for non-existing keyword group $key!");
-                }
-            }
-            foreach($language_data['STYLES']['KEYWORDS'] as $key => $keywords) {
-                if(!isset($language_data['KEYWORDS'][$key])) {
-                    report_error(TYPE_WARNING, "Language file contains an superfluous \$language_data['STYLES']['KEYWORDS'] specification for non-existing keyword group $key!");
-                }
-            }
-
-            foreach($language_data['COMMENT_SINGLE'] as $ck => $cv) {
-                if(!is_int($ck)) {
-                    report_error(TYPE_WARNING, "Language file contains an key '$ck' in \$language_data['COMMENT_SINGLE'] that is not integer!");
-                }
-                if(!is_string($cv)) {
-                    report_error(TYPE_WARNING, "Language file contains an non-string entry at \$language_data['COMMENT_SINGLE'][$ck]!");
-                }
-                if(!isset($language_data['STYLES']['COMMENTS'][$ck])) {
-                    report_error(TYPE_WARNING, "Language file contains no \$language_data['STYLES']['COMMENTS'] specification for comment group $ck!");
-                }
-            }
-            if(isset($language_data['COMMENT_REGEXP'])) {
-                foreach($language_data['COMMENT_REGEXP'] as $ck => $cv) {
-                    if(!is_int($ck)) {
-                        report_error(TYPE_WARNING, "Language file contains an key '$ck' in \$language_data['COMMENT_REGEXP'] that is not integer!");
-                    }
-                    if(!is_string($cv)) {
-                        report_error(TYPE_WARNING, "Language file contains an non-string entry at \$language_data['COMMENT_REGEXP'][$ck]!");
-                    }
-                    if(!isset($language_data['STYLES']['COMMENTS'][$ck])) {
-                        report_error(TYPE_WARNING, "Language file contains no \$language_data['STYLES']['COMMENTS'] specification for comment group $ck!");
-                    }
-                }
-            }
-            foreach($language_data['STYLES']['COMMENTS'] as $ck => $cv) {
-                if($ck != 'MULTI' && !isset($language_data['COMMENT_SINGLE'][$ck]) &&
-                    !isset($language_data['COMMENT_REGEXP'][$ck])) {
-                    report_error(TYPE_NOTICE, "Language file contains an superfluous \$language_data['STYLES']['COMMENTS'] specification for Single Line or Regular-Expression Comment key $ck!");
-                }
-            }
-            if (isset($language_data['STYLES']['STRINGS']['HARD'])) {
-                if (empty($language_data['HARDQUOTE'])) {
-                    report_error(TYPE_NOTICE, "Language file contains superfluous \$language_data['STYLES']['STRINGS'] specification for key 'HARD', but no 'HARDQUOTE's are defined!");
-                }
-                unset($language_data['STYLES']['STRINGS']['HARD']);
-            }
-            foreach($language_data['STYLES']['STRINGS'] as $sk => $sv) {
-                if($sk && !isset($language_data['QUOTEMARKS'][$sk])) {
-                    report_error(TYPE_NOTICE, "Language file contains an superfluous \$language_data['STYLES']['STRINGS'] specification for non-existing quotemark key $sk!");
-                }
-            }
-
-            foreach($language_data['REGEXPS'] as $rk => $rv) {
-                if(!is_int($rk)) {
-                    report_error(TYPE_WARNING, "Language file contains an key '$rk' in \$language_data['REGEXPS'] that is not integer!");
-                }
-                if(is_string($rv)) {
-                    //Check for unmasked / in regular expressions ...
-                    if(empty($rv)) {
-                        report_error(TYPE_WARNING, "Language file contains an empty regular expression at \$language_data['REGEXPS'][$rk]!");
-                    } else {
-                        if(preg_match("/(?<!\\\\)\//s", $rv)) {
-                            report_error(TYPE_WARNING, "Language file contains a regular expression with an unmasked / character at \$language_data['REGEXPS'][$rk]!");
-                        } elseif (preg_match("/(?<!<)(\\\\\\\\)*\\\\\|(?!>)/s", $rv)) {
-                            report_error(TYPE_WARNING, "Language file contains a regular expression with an unescaped match for a pipe character '|' which needs escaping as '&lt;PIPE&gt;' instead at \$language_data['REGEXPS'][$rk]!");
-                        }
-                    }
-                } elseif(is_array($rv)) {
-                    if(!isset($rv[GESHI_SEARCH])) {
-                        report_error(TYPE_ERROR, "Language file contains no GESHI_SEARCH entry in extended regular expression at \$language_data['REGEXPS'][$rk]!");
-                    } elseif(!is_string($rv[GESHI_SEARCH])) {
-                        report_error(TYPE_ERROR, "Language file contains a GESHI_SEARCH entry in extended regular expression at \$language_data['REGEXPS'][$rk] which is not a string!");
-                    } else {
-                        if(preg_match("/(?<!\\\\)\//s", $rv[GESHI_SEARCH])) {
-                            report_error(TYPE_WARNING, "Language file contains a regular expression with an unmasked / character at \$language_data['REGEXPS'][$rk]!");
-                        } elseif (preg_match("/(?<!<)(\\\\\\\\)*\\\\\|(?!>)/s", $rv[GESHI_SEARCH])) {
-                            report_error(TYPE_WARNING, "Language file contains a regular expression with an unescaped match for a pipe character '|' which needs escaping as '&lt;PIPE&gt;' instead at \$language_data['REGEXPS'][$rk]!");
-                        }
-                    }
-                    if(!isset($rv[GESHI_REPLACE])) {
-                        report_error(TYPE_WARNING, "Language file contains no GESHI_REPLACE entry in extended regular expression at \$language_data['REGEXPS'][$rk]!");
-                    } elseif(!is_string($rv[GESHI_REPLACE])) {
-                        report_error(TYPE_ERROR, "Language file contains a GESHI_REPLACE entry in extended regular expression at \$language_data['REGEXPS'][$rk] which is not a string!");
-                    }
-                    if(!isset($rv[GESHI_MODIFIERS])) {
-                        report_error(TYPE_WARNING, "Language file contains no GESHI_MODIFIERS entry in extended regular expression at \$language_data['REGEXPS'][$rk]!");
-                    } elseif(!is_string($rv[GESHI_MODIFIERS])) {
-                        report_error(TYPE_ERROR, "Language file contains a GESHI_MODIFIERS entry in extended regular expression at \$language_data['REGEXPS'][$rk] which is not a string!");
-                    }
-                    if(!isset($rv[GESHI_BEFORE])) {
-                        report_error(TYPE_WARNING, "Language file contains no GESHI_BEFORE entry in extended regular expression at \$language_data['REGEXPS'][$rk]!");
-                    } elseif(!is_string($rv[GESHI_BEFORE])) {
-                        report_error(TYPE_ERROR, "Language file contains a GESHI_BEFORE entry in extended regular expression at \$language_data['REGEXPS'][$rk] which is not a string!");
-                    }
-                    if(!isset($rv[GESHI_AFTER])) {
-                        report_error(TYPE_WARNING, "Language file contains no GESHI_AFTER entry in extended regular expression at \$language_data['REGEXPS'][$rk]!");
-                    } elseif(!is_string($rv[GESHI_AFTER])) {
-                        report_error(TYPE_ERROR, "Language file contains a GESHI_AFTER entry in extended regular expression at \$language_data['REGEXPS'][$rk] which is not a string!");
-                    }
-                } else {
-                    report_error(TYPE_WARNING, "Language file contains an non-string and non-array entry at \$language_data['REGEXPS'][$rk]!");
-                }
-                if(!isset($language_data['STYLES']['REGEXPS'][$rk])) {
-                    report_error(TYPE_WARNING, "Language file contains no \$language_data['STYLES']['REGEXPS'] specification for regexp group $rk!");
-                }
-            }
-            foreach($language_data['STYLES']['REGEXPS'] as $rk => $rv) {
-                if(!isset($language_data['REGEXPS'][$rk])) {
-                    report_error(TYPE_NOTICE, "Language file contains an superfluous \$language_data['STYLES']['REGEXPS'] specification for regexp key $rk!");
-                }
-            }
-
-
-        }
-
-        output_error_cache();
-
-        flush();
-
-        if($error_abort) {
-            break;
-        }
-    }
-}
-?></li>
-</ol>
-
-<p>Validation process completed in <?
-$time_end = explode(' ', microtime());
-$time_diff = $time_end[0] + $time_end[1] - $time_start[0] - $time_start[1];
-
-echo sprintf("%.2f", $time_diff);
-?> seconds.</p>
-
-<div id="footer">GeSHi &copy; 2004-2007 Nigel McNie, 2007-2008 Benny Baumann, released under the GNU GPL</div>
-</body>
-</html>

examples/includes/geshi/docs/BUGS

@@ -1,29 +0,0 @@
-
-                      BUGS - list of known bugs in GeSHi
-                                Version 1.0.8
-
-- Number highlighting is quite poor [possibly better now]
-- I'm not happy with URLS - there still could be extra bugs, and it's rather unflexible
-  (see TODO for a possible fix)
-- "Important" sections for some reason seem to have their spans added after every
-  newline up until the next lexic, instead of stopping at the <END GeSHi> part. In fact,
-  context sensitiveness is quite poor...
-- Using the extra line number highlighting feature without actually using line numbers
-  will result in malformed XHTML (not sure about this one though...)
-- Slow!!! Especially for source with lots of strings in it. GeSHi will work acceptably
-  for sourcecode under 5K (for simple language files like SQL, a 100K file can be
-  highlighted in just 6 seconds), but above about 25K things get a little slow... If
-  you're using this as part of some larger software, you may want to think about
-  making some sort of "cache" effect to speed things up and reduce server load.
-- The result is built by string replacement instead of by building another string based
-  on the source, that would be much safer. The focus of releases beyond 1.0.7 will be on
-  changing this behaviour, which may well fix some of the other bugs mentioned above.
-- As of 1.0.7.1, dots (.) are allowed before keywords. This may change highlighting of some
-  things slightly, if you notice anything odd about the highlighting then please report
-  it to me.
-- Perl/Javascript /.../ regex syntax is only supported basically and there's no
-  guarantee it is working all the time.
-- The <pre> header output is not XHTML compliant. Please use the <div> header instead.
-
-Send any bug reports to BenBE@omorphia.de, or submit them via the bug tracker at
-sourceforge (http://sourceforge.net/tracker/?group_id=114997&atid=670231)

examples/includes/geshi/docs/CHANGES

@@ -1,682 +0,0 @@
-
-              CHANGES - Changelog for GeSHi (geshi.php only)
-
-Changes to the code are listed under the version they occured in, with who suggested
-it by each one (if there's nobody listed as suggesting it I dreamed it up :)). Users
-who suggested an idea often also provided the code that was used as a basis for the
-changes - thanks to all who suggested these ideas and gave me the code to show me how!
-
-Language files listed under each version were made by the author beside them, and then
-modified by me for consistency/bug fixing.
-
-Please send any bug reports to BenBE@omorphia.de, or use the bug report tracker
-at sourceforge (http://sourceforge.net/tracker/?group_id=114997&atid=670231)
-
-Version 1.0.8.3
-  -  Added language files
-     * DCS (Stelio Passaris)
-     * Locomotive Basic (Nacho Cabanes)
-     * LSL2 (Linden Scripting Language) (William Fry)
-     * Modula-3 (Martin Bishop)
-     * Oberon-2 (Mike Mol)
-     * Rebol (Lecanu Guillaume)
-  -  Fixed a problem where HardEscapes weren't working when no escape char was given (BenBE)
-  -  Added a PARSER_CONTROL setting to treat whitespace inside of keywords in
-     the language file as "any whitespace" in the source (i.e. "CREATE TABLE"
-     in SQL will match "CREATE\s+TABLE" instead of literally matching) (BenBE)
-  -  Added a possibility to allow setting the style for escape characters (BenBE)
-  -  Improvements to language files (BenBE)
-     * Added some missing Perl keywords and obscure default variables (BenBE)
-     * Allow for escaped colons to appear in CSS names (BenBE, simon)
-     * Added multiline continuation suppoert of preprocessor defines for
-       C, C for Mac, C++ and CC++ with Qt support (BenBE)
-     * keywords for C-based languages are case-sensitive (BenBE)
-     * Broken AutoIt highlighting (BenBE)
-     * Problem with escaped backslash in PHP and D (BenBE)
-     * Added some more functions for PHP (BenBE)
-     * Some changes for AppleScript (Stefan Klieme)
-     * Forbid highlighting keywords followed by / in bash (BenBE)
-     * Updated the LaTeX file to link some keywords (BenBE)
-     * Additional text rendered when matching special variables for PowerShell (BenBE)
-     * Added some more keywords for ABAP (BenBE, Sandra Rossi, Jacob Laursen)
-Version 1.0.8.2
-  -  Added language files
-     * Brainfuck \ Brainfork (Benny Baumann)
-     * HQ9+ (Benny Baumann)
-     * INTERCAL (Benny Baumann)
-     * LOLcode (Benny Baumann)
-     * LScript (Beau McGuigan)
-     * Pixel Bender (Richard Olsson)
-     * ProvideX (Jeff Wilder)
-     * VIM Script (Swaroop C H)
-     * Visual Prolog (Thomas Linder Puls)
-     * Whitespace (Benny Baumann)
-  -  Changed priority for COMMENT_REGEXP compared to String highlighting (BenBE)
-  -  Fixed correct escaping of spaces inside of URLs (BenBE)
-  -  Updated the list of common file extensions (BenBE)
-  -  Updated the language file check script in contrib/ (BenBE)
-  -  Fixed a problem with link targets resulting in unclickable links (SF#2379120, BenBE)
-  -  Fixed an undefined variable issue in langcheck.php (BenBE)
-  -  Improvements to language files (BenBE)
-     * eMail Header highlighting now uses the correct delimiters for keywords (BenBE)
-     * eMail (RFC822\mbox) highlighting now highlights IPs, MIME types and
-       subfield assignments correctly (BenBE)
-     * Minor style changes in COBOL to improve loading performance (BenBE)
-     * Added some missing keywords for D (BenBE)
-     * Removed duplicate keywords from Progres, SAS and TSQL (BenBE)
-     * Fixed Heredoc Syntax for Bash (SF#2185319, BenBE)
-     * Moved symbol-lookalike sequences from keyword groups to separate symbol group
-       for languages asp, klonec, klonecpp, php, php-brief (BenBE)
-     * Fixed a lot of duplicate keyword warnings (BenBE)
-     * Added missing keywords to the Python language file,
-       introducing support for Python 3.0. (SF#2441839, milian)
-     * Updated documentation links for TypoScript (SF#2014276, BenBE)
-     * Fixed a problem with tag and attribute names in XML highlighting (SF#2276119, BenBE)
-     * Improved MySQL language file (BenBE, JavaWoman)
-     * Some commentss accidentially mistaken for DocComments (SF#2454897, BenBE)
-     * Added improved Escape Char handling for c, c_mac, cpp and cpp_qt (SF#2458743, BenBE)
-Version 1.0.8.1
-  -  Added language files
-     * AviSynth (Ryan Jones)
-     * eMail \ mbox (Benny Baumann)
-     * GNU Make (Neil Bird)
-     * Oracle 11i support (Simon Redhead)
-     * Prolog (Benny Baumann)
-     * SciLab (Christophe David)
-     * TeraTerm macro language (Boris Maisuradze)
-  -  Added support for Escape Regular Expressions (BenBE)
-     * Implemented C-style Escapes in PHP (BenBE)
-     * Introduced support for \xAB and \007 style Char Escapes in PHP (BenBE)
-     * Implemented Variable Highlighting in PHP (BenBE)
-     * Implemented Variable Highlighting in Bash (milian)
-  -  Fixed a problem with PCRE patterns for Keyword matching sometimes producing
-     very large strings, that could not be handled by some versions of PCRE lib,
-     causing broken highlighting an Regexp Compile errors (BenBE, milian)
-  -  Fixed broken highlighting of bash commands like `dbus-send --dest=org.....`,
-     i.e. the dest was highlighted as variable declaration (milian)
-  -  Fixed broken highlighting of some symbols in their escaped form (BenBE)
-     (<SEMI> and <PIPE> were accidentially filtered even though they are valid)
-  -  Fixed a "memory leak" in the *_regexp_caches (milian)
-  -  Fixed broken Escape chars if classes were disabled
-  -  start_line_numbers_at() was ignored when GESHI_HEADER_PRE_TABLE was set (revulo)
-  -  Fixed a problem allowing Remote Code Inclusion under certain circumstances (BenBE)
-  -  Changes to default CSS in order to make the GESHI_HEADER_PRE_TABLE align properly,
-     even on Windows / Mac systems with strange fonts (milian, revulo, ^RT)
-  -  Minor style changes to the following languages:
-     * cpp-qt (milian)
-     * MySQL (BenBE)
-     * PHP (BenBE)
-  -  Improvements to language files (BenBE, milian)
-     * Added MinSpareThread\MaxSpareThreads to Apache highlighter (BenBE)
-     * Added new Keyword group for APT sources.list highlighter (BenBE)
-     * Fixed highlighting in LaTeX for \begin{} and \end{}, i.e. the stuff inside
-       the curly braces. (milian, thanks for the report go to Matthias Pospiech)
-     * Improved String support for D (BenBE)
-     * MySQL was seriously broken (BenBE)
-     * Reworked Keyword groups for MySQL to allow for more configuration (BenBE)
-     * Improved Mirc script language file (milian)
-     * Improved C++ Qt language file (milian)
-     * Minor bug with Transpose Operator in Matlab (BenBE, Daniele de Rigo)
-     * Highlighting of Batch Files for Windows (BenBE)
-     * Updated AutoIt to include latest changes for AutoIt v3.2.12.1 (BenBE, Thierry)
-     * Fixed duplicate keyword warnings for Perl, Tcl and Typoscript (BenBE)
-     * Fixed Doc-URL getting reparsed by highlighted keywords of other groups (BenBE, Jordi Boggiano)
-Version 1.0.8
-  -  Added language files
-     * APT sources.list (milian)
-     * Boo (Marcus Griep)
-     * CIL (Common Intermediate Language, .NET Assembly) (Marcus Griep)
-     * COBOL (Benny Baumann)
-     * Gnuplot (milian)
-     * KLoneC (Mickael Auger)
-     * KLoneC++ (Mickael Auger)
-     * PIC16xxx assembler (Phil Mattison)
-     * POV-Ray (Carl Fürstenberg)
-     * PowerShell (Frode Aarebrot)
-     * Progress (Marco Aurelio de Pasqual)
-     * TypoScript (Jan-Philipp Halle)
-     * Xorg configuration (milian)
-  -  Make GeSHi's constructor arguments optional, so something like `$foo = new GeSHi;` is possible. (milian)
-  -  Added an optimizer for lists to regular expressions. Using these cached lists results in a speedup of approx. 50%.
-     The slightly increased memory consumption (~150KB for PHP language file) is more than worth it! (milian)
-  -  Some more memory & speed optimizations all over GeSHi (milian)
-     * Reduced memory overhead when highlighting keywords (BenBE)
-     * Keyword Linking now uses considerably less strtolower calls (milian)
-     * Cache Symbol Search Regexp and make Symbol Highlighting faster (milian)
-     * Use more native functions like substr_replace and strcasecmp to speed things up (milian)
-     * Use considerably less strlen() calls on various points by caching the results (milian)
-     * Properly set comments to be case insensitive where appropriate to increase performance (milian)
-     * Improve the performance of the strict mode tokenizer, making highlighting of languages like
-       HTML, ColdFusion or XML faster (milian)
-     * Setup caches for parsing on demand to make stylesheet generators fast (milian)
-  -  Various improvements to Strict Block Handling (BenBE, milian)
-     * Added support for RegExp-based Strict Blocks (BenBE)
-     * Fixed highlighting incorrectly stopping at ?> in PHP (SF#1330968, BenBE)
-     * Languages with STRICT_MODE_APPLIES = GESHI_MAYBE default to strict mode now. When no highlightable
-       code is found in this mode, we fallback to the same setting as if GESHI_NEVER was set. That way it
-       should not be needed to call enable_strictmode() manually. (milian)
-  -  Added new GESHI_HEADER_PRE_VALID type which uses the following markup: (milian)
-     * With line numbers:     <div>header<ol><li><pre>...</pre></li>...</ol></div>
-     * Without line numbers:  <pre>header...CODE...</pre>
-     => valid HTML and no need for &nbsp; indentation
-  -  Added new GESHI_HEADER_PRE_TABLE type which can be used to prevent linenumber-selection in Firefox
-     on copy'n'paste. (milian)
-  -  set_language will not reset any language settings by default anymore.
-     * Added $force_reset param for to force full reload of a language. (milian)
-     * Make sure strict_mode is set properly when doing repeated set_language calls (milian)
-  -  Fixed some problems with old PHP versions (SF#1975625, milian, BenBE)
-  -  Fixed broken use with Suhosin Patch when /e modifier was disabled (SF#2021800, BenBE)
-  -  Added support for external style information files to override language defaults without modifying language files (BenBE)
-  -  The overall_class is now up to the user, and the language-code is _always_ added as a class (milian)
-  -  Fixed Economy Mode for GeSHi::get_stylesheet() - now it just makes so much more sense! (milian)
-  -  Fixed Economy Mode when COMMENT_REGEXP are used (BenBE)
-  -  Changed the default encoding to use UTF-8, due to SF#2037598, BenBE)
-  -  Improved overall string support:
-     * Added support for multichar string delimiters (SF#1932083, BenBE)
-     * Fixed problems of unfinished strings and comments producing invalid XHTML (SF#1996353, BenBE)
-     * Multichar Quotemarks sometimes had inconsistent behaviour (BenBE)
-     * Support for multiple styles of strings depending on the starter (BenBE)
-     * Properly handle escapes in strings, i.e. '\\' was not working properly before (milian)
-     * Fixed escape char support when an escape char is followed by multi-byte chars (SF#2037598, BenBE)
-  -  Improved flexibility in language files (BenBE, milian)
-     * Added PARSER_CONTROL for OOLANG method highlighting (SF#1923060, BenBE)
-     * Added possibility to define strict blocks using an Regexp (BenBE)
-     * Removed explicit escaping of / in Regular Expressions (BenBE)
-     * Ignoring empty keyword groups when highlighting (milian)
-     * Make language_permissions configurable in language files via ['PARSER_CONTROL']['ENABLE_FLAGS']
-       this makes is_a calls unneeded and thus prevents PHP notices in PHP 5.x (milian)
-     * Extended support for number formats now covering the most common formats (SF#1923058, BenBE)
-     * Lifted a limitation that keywords had to have at least 2 subsequent letters (BenBE)
-     * Changed behaviour of PARSER_CONTROL now allowing to provide the full Lookahead and Lookbehind
-       expressions used as delimiters inside keywords instead of a simple char group (BenBE)
-     * Fixed improper handling of newlines in REGEXPS so this does not produce invalid html anylonger (milian)
-  -  Some typos and mistakes in the documentation (BenBE)
-  -  Added a script to contrib/ to verify language files are correct (BenBE)
-  -  Fixed loads of compliancy warnings detected with that automated compliance testing script (BenBE)
-  -  Many other improvements to various language files (BenBE, milian)
-     * Reduce strict errors & notices for language files (milian)
-     * Fixed symbol highlighting with C++ sometimes missing keywords after ; and comments (BenBE)
-     * Improved comment handling with TCL (Lars Hellström, BenBE)
-     * Fixed broken handling with XML comments (BenBE, SF#1849233)
-     * Fixed HTML comments spawning multiple lines producing invalid XHTML output (SF#1738173, BenBE)
-     * Added support for parameters beginning with dash in BASH language (BenBE)
-     * Support Apache's configuration sections, see http://httpd.apache.org/docs/2.2/sections.html (milian)
-     * Minor issue with PHP Heredoc and Nowdoc syntax sometimes not getting highlighted (BenBE)
-     * Updated Objective-C language file (SF#2013961, Quinn Taylor, BenBE)
-     * Added some keywords for VHDL (beshig, BenBE)
-     * Fixed severly broken ColdFusion language file (milian)
-     * Fixed some incorrectly highlighted things with the CSS language file (milian, BenBE)
-     * Improved Smarty language file (milian)
-     * Improved CSS language file (milian)
-     * Improved Pascal language file (milian)
-     * Improved LaTeX language file (Андрей Парамонов, BenBE)
-     * Fixed a regular expression in mIRC language file that caused a warning message to be issued (BenBE)
-     * Removed <, > and / from HTML names, now only containing the real tag names (BenBE)
-     * Use spaces instead of tabs for indendation in language files to have a consistent
-       coding standard accross geshi files (milian)
-     * Added some comment styles, keywords and added index highlighting (Chusslove Illich, Часлав Илић)
-  -  Removed some private methods which were only called at exactly one place (milian)
-     * format_header_content
-     * format_footer_content
-     * get_attributes
-  -  Second part of default style changes. Affected in this release:
-     * C++
-     * C++ (QT)
-     * CSS
-     * VHDL
-Version 1.0.7.22
-  -  Added language files
-     * glSlang (BenBE)
-     * KiXtart (Riley McArdle)
-     * Lotus Notes @Formulas (Richard Civil)
-     * LotusScript (Richard Civil)
-     * MXML (David Spurr)
-     * Scala (Franco Lombardo)
-     * ActionScript 3 (Jordi Boggiano)
-     * GNU Gettext .po/.pot (Milian Wolff)
-     * Verilog (Günter Dannoritzer)
-  -  Fixed a problem not yet addressed in 1.0.7.21 regarding highlighting of
-     symbols that caused some extra characters to be added in the output or
-     broke highlighting and standard compliance due to missing escaping of
-     internally used characters (SF#192320 and SF#1926259, BenBE)
-  -  Fixed missing style information for ocaml language file (The_PHP_Jedi)
-  -  Fixed a bug causing masses of warnings in rendered output if language file
-     miss style information (The_PHP_Jedi, BenBE)
-  -  Missing tab width information could lead to warnings (BenBE)
-  -  Missing symbol information for ASP (SF#1952038, nfsupport, BenBE)
-  -  Empty delimiter message with OOoBasic (BenBE, Ccornell)
-  -  Escaping of comments in LaTeX ignored (SF#1749806, BenBE)
-  -  Modified Math environment $$ in LaTeX to be non-greedy (BenBE)
-  -  Added possibility to match a regexp as comment (SF#1914640, SF#1945301, SF#1934832, BenBE)
-  -  Introduced C-Style multiline continuation comments (SF#1914640, SF#1945301, BenBE)
-  -  Introduced Fortran Comments (SF#1914640, SF#1934832, BenBE)
-  -  Implemented Heredoc and Nowdoc Syntax for PHP and Perl (SF#1914640, BenBE)
-  -  Implemented Compiler Directives for Delphi (SF#1914640, BenBE)
-  -  Implemented minimalistic support for JavaScript \ Perl Regular Expressions (SF#1786665, SF#1754333, SF#1956631, BenBE)
-  -  Fixed Strings in Matlab to be handled as comments instead of regexps, to prevent keywords being linked (BenBE)
-  -  Applied PARSER_CONTROL fix of CPP for CPP-QT-Derivative (BenBE)
-  -  Fixed incorrect treatment of unequally long multiline comment separators (related to SF #1891630, BenBE)
-  -  Added PARSER_CONTROL settings for keywords in ASM language file (SF#1835148, BenBE)
-  -  Fixed missing CASSE_SENSITIVE entry for DOS language file (SF#1956314, BenBE)
-  -  Fixed accidential highlighting of keywords in argument names (SF#1956456, Milian Wolff, BenBE)
-  -  Fixed yet again some #-related bash problem (SF#1956459, Milian Wolff, BenBE)
-  -  Added backticks as symbols (Milian Wolff)
-  -  Example script remembers selections and source submitted (Milian Wolff)
-  -  Example script allows remembered source and preselected language to be cleared (Milian Wolff)
-  -  Example script now properly includes geshi and doesn't suppress error messages anylonger. (Milian Wolff)
-  -  Code cleanup by using direct string indexing instead of substr with length 1 (Milian Wolff)
-  -  Optimized generation of code parts in strict mode (Milian Wolff)
-  -  Optimized COMMENT_REGEXP by using an incremental regexp cache (Milian Wolff, BenBE)
-  -  Fixed a problem that rarely skipped highlighting of escaped chars which usually should have gotten highlighted (BenBE)
-  -  Optimized generation of highlighted strings to use fast skip forward while highlighting them (Milian Wolff, BenBE)
-  -  Optimization using basic rework of indent function improving tab expansion performance (BenBE)
-  -  Lots of other minor optimizations based on coding style improvements (Milian Wolff)
-  -  Implemented setting to force spans to be closed before newlines, see SF#1727398 (Milian Wolff)
-  -  Added missing credits for D language file to THANKS file (SF#1720899, BenBE)
-  -  Optimization to prevent loading the current language file twice (Milian Wolff)
-  -  Optimization: Use file_get_contents() to load sourcecode from files.
-     Even if GeSHi worked with PHP 4.1 before, it doesn't now. (Milian Wolff)
-  -  Added description of extra language features (SF#1970248, BenBE)
-  -  Added support for highlighting the C# using and namespace directives (SF #1395677, BenBE)
-  -  Added support for highlighting the Java import and package directives (SF #1395677, BenBE)
-  -  Fixed minor problem in Haskell cuasing accidential start of comment (SF#1987221, BenBE)
-  -  Fixed minor issue causing loads of warnings if a language files defines no symbols (BenBE)
-  -  Updated some aspects of the documentation and included further hints (BenBE)
-  -  First of series of color scheme changes. Affected languages (sofar):
-     * Assembler (x86)
-     * Bash
-     * C
-     * C#
-     * Delphi
-     * Fortran77
-     * glSlang
-     * Java & Java 5
-     * JavaScript
-     * OCaml
-     * OpenOffice.org Basic
-     * Pascal
-     * Perl
-     * PHP and PHP-Brief
-Version 1.0.7.21
-  -  Added language files
-     * Basic4GL (Matthew Webb)
-  -  Fixed problem with mIRC language highlighting spaces only (BenBE)
-  -  Language files can now specify a function to be called to decide the
-     colour of a regular expression match
-  -  Added single quote to Lua (Darrin Roenfanz)
-  -  Compare comments case insensitively (fixes AutoIT comments somewhat)
-     (Daniel Gordon)
-  -  Fixed symbols not being highlighted at all (SF #1767953, BenBE)
-  -  Fixed brackets not correctly managed (SF #1767954, BenBE)
-  -  Changed default languages for some extensions
-  -  Included color and character information for symbol highlighting in some languages (BenBE)
-  -  Fixed a problem with extension detection if default was used (BenBE)
-  -  Fixed a highlighting problem with the LaTeX language (SF #1776182, BenBE)
-  -  Added a new parameter for enable_highlighting to reduce source duplication (SF #1786104, BenBE)
-  -  Updated doxygen documentation to include since tags and some missing parameters
-  -  Disabled symbol highlighting by default (doesn't affect brackets, cf. documentation) (BenBE)
-  -  Added a check for set_case_keywords for the given param to be supported (BenBE)
-  -  Minor rework of the HTML documentation layout \ W3C compliance (BenBE)
-  -  Fixed highlighting error in bash language avoiding keywords in comments (SF #1786314, SF #1564839, BenBE)
-  -  Fixed template params for C++ and C# not being highlighted (SF #1772919, BenBE)
-  -  Fixed more reported problems about mirc highlighting
-  -  Added some missing keywords for VB.NET
-  -  Fixed some warnings in DOS language file (Florian Angehrn)
-  -  Add possibility to handle more than one extra line style (SF #1698255, German Rumm, BenBE)
-  -  Fixed handling of URLs when output case differs from URL case (SF #1815504, Tom Samstag, BenBE)
-  -  Fixed POD (Plain Old Documentation) format problems breaking highlighting of Perl (SF #1891630, Shannon Wynter, BenBE)
-  -  Fixed a problem with mIRC when & was used for identifiers (SF #1875552, BenBE)
-Version 1.0.7.20
-  -  Added language files
-     * Genero (logic) and Per (forms) (FOURJ's Genero 4GL) (Lars Gersmann)
-     * Haskell (Dagit)
-     * ABAP (Andres Picazo)
-     * Motorola 68k Assembler (for MC68HC908GP32 Microcontroller) (BenBE)
-     * Dot (Adrien Friggeri)
-  -  Fixed java documentation search for keywords to actually go to the
-     documentation (spaze)
-  -  Applied fix for bug 1688864 (bad regexes) (Tim Starling)
-  -  Fixed comment CSS rule in visualfoxpro
-  -  ThinBASIC language update (Eros Olmi)
-  -  mIRC language update (BenBE)
-  -  Fixed outdated documentation URL of Perl language file (RuralMoon by BenBE)
-  -  Fixed tab replacement code not generating the correct number of spaces in
-     some cases (Guillermo Calvo)
-  -  Fixed two typos in Z80 language file
-  -  Applied fix for bug 1730168 (Daniel Naber)
-  -  Applied fix for bug 1705482 (Jason Frame)
-     * Configurable line endings (Replace \n by custom string)
-     * per-language tab-widths (Adjustable for width>=1)
-     * Included defaults for ASM (x86, m68k, z80), C, C (Mac), C++, C++ (QT), C#,
-       Delphi, CSS,, HTML, PHP, PHP (Brief), QBasic, Ruby, XML
-  -  Added a possibility to force generation of a surrounding tag around
-     the highlighted source
-  -  Applied fix for additional keywords for the bash language
-     (cf. http://bash.thefreebizhost.com/bash_geshi.php, BenBE / Jan G)
-  -  Fix bad colour definition in GML language (Andreas Gohr)
-  -  Fixed phpdoc comments not being indented one space if they should be (Andy
-     Hassall)
-Version 1.0.7.19
-  -  Added language files
-     * X++ (Simon Butcher)
-     * Rails (Moises Deniz)
-  -  Fixed invalid HTML being generated and doctypes not being highlighted over
-     multiple lines properly when line numbers are on (Validome)
-  -  Improved the ruby syntax highlighting by basing it off the Rails file
-  -  Changed some regular expressions to possibly help with badly performing
-     regex support in PHP (Tim Starling)
-  -  Allow {TIME}, {LANGUAGE} and {VERSION} to be used in the header as well as
-     the normal <TIME>/<LANGUAGE>/<VERSION> (AthanD)
-  -  Changed comment regex in bash to prevent malformed XHTML (rv1971)
-Version 1.0.7.18
-  -  Added language files
-     * ZiLOG Z80 Assembly (BenBE)
-  -  Fixed incorrect highlighting when the starter of a multiline comment is
-     longer than the ender (Robert Anthony).
-  -  Fixed "</span" generated if a multiline comment is the last thing in the
-     source (related to the above).
-  -  Added #cs => #ce comment markers to AutoIT (Robert Anthony)
-  -  Fixed spelling mistake for keyword in Python (wd3)
-  -  Added a method to enable/disable keyword linking (Ian McKellar)
-  -  Improved empty line detection for HTML output (BenBE)
-  -  Changed code style of geshi.php, and removed tabs
-Version 1.0.7.17
-  -  Fixed up ends of files having too many newlines (binarygroop)
-  -  Removed background colour on keyword group in eiffel (Julian Tschannen)
-  -  Removed GESHI_DIR_SEPARATOR constant usage, it's unnecessary (Aleksey Zapparov)
-  -  Added /* ... */ comments to coldfusion (Jeff Howden)
-Version 1.0.7.16
-  -  Added language files
-     * ActionScript (Steffen Krause)
-     * C++/QT (Iulian M)
-     * PL/SQL (Victor Engmark)
-  -  Fixed up my e-mail address everywhere
-  -  Fixed notice with "error" property (IZIU Zielona Góra)
-  -  Added some entries to the get_language_name_from_extension table
-     (Stebastian Schuberth)
-Version 1.0.7.15
-  - Added language files
-     * BNF (Rowan Rodrik van der Molen)
-     * IO (me, thanks to Johnathan Wright)
-     * mIRC (Alberto de Areba Sánchez)
-  -  Fixed use of colon in XML (Grigory Rubtsov)
-  -  Fixed notices in text.php, reg.php and latex.php when $this is not
-     available (Clemens Weiß)
-  -  Made third parameter of geshi_highlight optional (Gaetano Giunta)
-  -  Fix incorrect highlighting of the $# variable in bash (Michael Knight)
-  -  Fixed single line comment mistake in thinbasic.php (Eros Olmi)
-Version 1.0.7.14
-  -  Added language files
-     * thinBasic (Eros Olmi)
-     * LaTeX (Matthais Pospiech)
-  -  Removed extra newlines at the end of some files
-  -  Fixed SF bug 1556404 - check before using $this in language files
-     (Clemens Weiß)
-Version 1.0.7.13
-  -  Added language files
-     * Uno IDL (Cedric Bosdonnat)
-  -  Fixed add_ids causing odd XHTML (RyanJ)
-  -  Fixed extra newline being added to end of result (Andreas Gohr)
-Version 1.0.7.12
-  -  Fixed lines being collapsed when they contain just a space (artlover)
-  -  Allowed matching for regexes using start/end matchers at the start/end
-     of the code (Sheri)
-  -  Added (dubious) fix for google "I'm feeling lucky" search for java keywords
-     (dubious in that it doesn't work for me)
-  -  mysql - Made the symbols into their own keyword group as the symbol group
-     isn't used. Added a style for multiline comments.
-  -  Added a couple of php5 keywords to the php language files.
-  -  Allow XML tags to have dashes.
-  -  Changed LANG_NAME for many languages to be more sensible/correct case
-     (Matthias Mohr)
-  -  Added case-sensitivity indices to python
-Version 1.0.7.11
-  -  Added language files
-     * Smalltalk (Bananeweizen)
-  -  Minor style improvements to matlab
-  -  Moved a couple of functions to the correct group in smarty (arwan)
-Version 1.0.7.10
-  -  Added language files
-     * TCL (Reid van Melle)
-     * Winbatch (Craig Storey)
-     * Groovy (Ivan F. Villanueva B.)
-     * Text (SmokingRope)
-     * Reg (SmokingRope)
-  -  Removed \ as an escape character in T-SQL (Dave Jackson)
-  -  Reset extra lines to highlight if source is changed (Diogo Resende)
-  -  Allow setting of lexic permissions in language files (SmokingRope)
-  -  Allow regexes to set a CSS class name (SmokingRope)
-  -  Added URL support to DOS language (mastrboy)
-Version 1.0.7.9
-  -  Added language files
-     * Fortran (Cedric Arrabie)
-     * SAS (Galen Johnson)
-     * CFDG (John Horigan)
-  -  Fixed & in URL in java5 (Clemens Weiß)
-  -  Added MD5 and SHA1 to mysql keywords (polarina)
-  -  Fixes for highlight_lines_extra with line numbers (ithcy)
-  -  Fixed backslash characters being removed (ArTourter)
-Version 1.0.7.8
-  -  Fixed blank at start of MySQL file (W. Tasin)
-  -  Fixed smarty functions being broken (ultrabob)
-  -  Changed keyword and regexp detection and parsing
-     slightly to allow more "meta characters" (like #) in
-     keywords
-  -  Minor fixes for XML and GML
-Version 1.0.7.7
-  -  Added language files
-     * T-SQL (Duncan Lock)
-     * Robots.txt (Christian Lescuyer)
-     * AutoIT (mastrboy)
-     * Java 5 (Clemens Bruckmann)
-     * ColdFusion (Diego)
-  -  A few keyword changes in java, removed :: object splitter (amphi)
-  -  Now using a simpler regular expression for numbers (Brice Bernard)
-  -  Fixed ah, bh etc. regs being highlighted as numbers (Unknown)
-Version 1.0.7.6
-  -  Fix backtick-string highlighting in ruby (Juan J. Martínez)
-  -  Add =begin multiline comments in ruby (Juan J. Martínez)
-  -  Added support for :keywords and ::access in lisp (Denis Mashkevich)
-  -  Prevented number highlighting if they are just after underscores (Joce)
-  -  Removed escape characters for strings in XML and HTML (floele)
-  -  Added instanceof keyword to java (jgottschling)
-  -  Fixed comments in ASP (SBD)
-  -  Removed unnecessary keyword style index from ini
-  -  Added support for " strings in ini
-  -  Removed unnecessary regex style index from blitzbasic
-  -  Keyword case of URL-ed keywords should be defined by language file (Benny Baumann)
-  -  Added "Hardquote" feature, provides more accurate string highlighting (Cliff Stanford)
-  -  Used hardquote support for @"..." strings in C# (Cliff Stanford)
-  -  Used hardquote support for ' strings in perl (Cliff Stanford)
-  -  Fixed setting of language path (Cliff Stanford)
-  -  Display source correctly formatted with line numbers (if requested) if an error
-     has occured (several people)
-  -  Having no source to highlight is not an error condition anymore
-  -  Delphi language updated to include more keywords and types (BenBE)
-  -  Updated NSIS to version 2.11 (deguix)
-Version 1.0.7.5
-  -  Fix for using escape characters to escape newlines breaking XHTML compliance (Yves Goergen)
-  -  Fixed method highlighting in VB (Matt Beale)
-  -  Fixed multiline comment highlighting in SQL (MrBaseball34)
-  -  Fixed two ">" symbols being outputted when using a footer but not CSS classes (MrBaseball34)
-  -  Marked important block stuff as deprecated
-  -  Some documentation tidyup
-  -  Updated GML language file (Jos? Jorge Enr?quez Rodr?guez)
-  -  THANKS file tidied up
-  -  Fixed double </a> for elements in HTML (Yves Goergen)
-  -  Added some keywords for ASM (Dreuzzo)
-Version 1.0.7.4
-  -  Added language files
-     * MySQL (Carl Fürstenberg)
-     * BlitzBasic (Pàdraig O`Connel)
-  -  Fixed up geshi_highlight function: it now correctly uses <code> instead of <div> (Remi Faure)
-  -  When using GESHI_HEADER_NONE, remove the <ol> if line numbering is not enabled
-  -  Commented example.php so people can use it as a guide better
-  -  Fixed extra newline being generated if a comment is at the end
-     of the source (many people, including Yves Goergen)
-  -  Fixed up some documentation issues
-  -  Some minor language file fixes (C++, Lua) (Lua fixes by chromix)
-  -  Fixed up no </span> in XML and other strict languages (regression from 1.0.7.3 fix: removed
-  	 unnecessary </span> when using strict mode) (Daniel Ecer, drskrud),
-Version 1.0.7.3
-  -  Added language files
-     * Scheme (Jon Raphaelson)
-     * Ocaml and Ocaml-brief (Flaie)
-     * Ruby (Amit Gupta)
-  -  Make urls generated for java highlighting XHTML compliant (Tim Van Wassenhove)
-  -  Removed unnecessary </span> when using strict mode (Tim Van Wassenhove)
-  -  Fixed warning in dos.php about undefined constant (Tim Van Wassenhove)
-  -  Fixed security hole in contrib/example.php - able to view any file if source
-     not set and language is set to wierd value (Maksymilian Arciemowicz)
-Version 1.0.7.2
-  -  Added language files
-     * Inno (Thomas Klinger)
-     * Ini (Deguix)
-     * DOS (Batchfile) (Alessandro Staltali)
-     * Applescript (Stephan Klimek)
-     * Freebasic (Roberto Rossi)
-     * SDLBasic (Roberto Rossi)
-     * ActionScript (links to French documentation) (NikO)
-  -  NSIS language file updated (deguix)
-  -  Lua language file updated (Roberto Rossi)
-  -  Bugfix: Styles incorrectly overriding default styles instead of being merged
-     in set_*_styles methods (Stebastian Werner)
-  -  Added GESHI_HEADER_NONE as valid header type. This still allows header content.
-Version 1.0.7.1
-  -  Added language files:
-     * Div (Gabriel Lorenzo)
-     * GML (José Jorge Enríquez Rodríguez)
-     * Eiffel (Zoran Simic)
-  -  Minor change to rules regarding when keywords can appear - now dots (.) are
-     allowed before keywords. (NikO)
-  -  Bugfix: the line style for non-fancy lines when fancy highlighting is enabled
-     is now applied (Amit Gupta)
-Version 1.0.7
-  -  Added language files:
-     * Diff (Conny Brunnkvist)
-     * VHDL (Alexander Krause)
-     * D (Thomas Kuehne)
-     * Matlab (Florian Knorn)
-  -  Python highlighting improved (thither, Federico Quagliata)
-  -  Changed file comments to use phpdoc syntax, and changed code style to be more
-  	 like PEAR
-  -  Fixed bug in set_code_style: Second parameter is now optional
-  -  The $_GESHI_ERRORS array is gone, error messages are internal to the GeSHi class
-  -  Changed name of XML language to XML from HTML
-  -  Removed min and max tab width checks
-  -  Backported GeSHi 1.1.X's automatic language file path detection so you no longer
-     need to use the third parameter of the constructor or set_language_path except for
-     special circumstances.
-  -  Source is checked to make sure it is not empty else an error occurs
-  -  Removed excess characters after ?> in ada.php, apache.php and cpp.php that caused
-     http headers to be sent (psichron)
-  -  Removed second "foreach" keyword for smarty language file that was causing
-     duplication (Iss)
-  -  Added underscore to allowed characters in match for XML tags (anonymous)
-  -  Added some missing java keywords like "abstract" and "transient"
-  -  Added "list" and "continue" PHP keywords
-  -  set_language resets error status and strict mode (Andrew Black)
-  -  Removed margin:0 declaration from cssgen.php (Andrzej Kubaszek)
-  -  Fixed multiline comment selector in cssgen.php (Andrzej Kubaszek)
-Version 1.0.6
-  -  Added support for smart tabs - tabs that behave just like normal tabs when in
-     GESHI_HEADER_DIV mode.
-  -  Partial patch for UTF-8 encoding applied (doesn't quite work however...)
-Version 1.0.5
-  -  Added language files:
-     * MPASM (Bakalex)
-     * Oracle 8 (Guy Wicks)
-  -  Fixed bug where not using an encoding type would sometime result in warnings (although
-     there still seems to be issues with encoding in general that I'm trying to gather more
-     data on) (Alexander Spennemann)
-  -  Removed "margin: 0" from <ol> in an attempt to make line numbers visible in IE again
-     by default (untested, but I don't really care if it works... get firefox! ;))
-  -  Added note on php5 support (Karim Scheik)
-  -  Added two new methods: load_from_file and get_language_name_from_extension, that can
-     help automate file highlighting (though the extension array at this time is quite bare)
-     (David Gartner, Brian Cheesman)
-Version 1.0.4
-  -  Fixed many version-reporting bugs (Jack Lloyd)
-  -  Fixed bug where methods were not having the correct CSS generated for them
-     by get_stylesheet() (Jack Lloyd)
-  -  Added new keywords to C and C++ files (Jack Lloyd)
-  -  Added section on case sensitivity to documentation that wasn't in the other versions
-Version 1.0.3
-  -  Added language files:
-     * Smarty (Alan Juden)
-     * C# (Alan Juden)
-     * VB.NET (Alan Juden)
-     * C for Macs (M. Uli Kusterer)
-     * Objective C (M. Uli Kusterer)
-  -  Links can have a target attribute (Andreas Gohr)
-  -  Fixed multiline string bug if not using classes
-  -  Added method set_encoding that allows you to set the character
-     set used by calls to htmlentities() in GeSHi
-  -  You can now specify an array of object splitters, and each
-     type of method separated by each object splitter can be highlighted
-     differently
-  -  If a language uses a case sensitive keyword group and that group
-     has a URL associated with it, the keyword will not be lowercased
-     in the URL (M. Uli Kusterer)
-Version 1.0.2
-  -  Added language files:
-     * Actionscript (Steffen Krause)
-     * ASP (Amit Gupta)
-     * Bash (Andreas Gohr)
-     * CADDCL (Roberto Rossi)
-     * CadLisp (Roberto Rossi)
-     * C++ (Dennis Bayer)
-     * Delphi (Járja Norbert)
-     * Javascript (Ben Keen)
-     * Lisp (Roberto Rossi)
-     * OpenOffice.org BASIC (Roberto Rossi)
-     * Perl (Andreas Gohr and Ben Keen)
-     * Python (Roberto Rossi)
-     * VisualFoxPro (Roberto Armellin)
-     * XML (Nigel McNie, from an idea/file by Christian Weiske)
-  -  Added contrib/ directory with script to create one external stylesheet
-     from many languages(base script by Andreas Gohr, modified by Nigel McNie),
-     and an example script (needs lotsa work...)
-  -  Code lines can have their own unique ID (for use with javascript)
-     (suggested by Andreas von Oettingen)
-  -  Certain rows can be specified to be highlighted differently (suggested by
-     Andreas von Oettingen)
-  -  Getter available for human-readable language name (suggested by Simon Patterson)
-  -  Line numbers aren't highlighted when a user selects the code
-  -  Contextual highlighting with <BEGIN GeSHi> ... <END GeSHi> in the code (which
-     can be disabled)
-  -  Functions can be made into URLs to appropriate documentation (suggested
-     by cybot_tm). Also thanks to Marcin Gryszkalis for the links for C, Java
-     and Perl.
-  -  Code can have a header and footer
-  -  Time taken to parse the code is recorded and made available with the get_time()
-     method
-  -  error() now returns a human-readable error message
-  -  Function geshi_highlight added to make it even easier to highlight on the fly
-  -  Advanced regular expression handling
-  -  Bug fixes to lexic_permission handling
-Version 1.0.1
-  -  Added methods set_symbols_style() and set_symbols_highlighting(). These should be used
-     instead of set_brackets_style and set_brackets_highlighting respectively.
-  -  Added a new field - language_path - that can be set either when the constructor is
-     called, or by the new method set_language_path(), that specifies a path to the directory
-     containing the language files (bug reported by bbspliff)
-  -  Added a new method set_case_keywords(), that allows the auto-casing feature to be
-     changed on the fly instead of simply being specified in the language file
-  -  If there is an error the source that is outputted is now handled much better
-  -  Lines are broken in the source only by \n now, not by \r\n (to save on output source)
-  -  Indentation moved into its own method
-  -  Method header() modified to allow the user to choose whether the code is surrounded in
-     a <div> or a <pre> (see documentation for benefits of both). Method footer() likewise
-     modified.
-  -  Method get_stylesheet() modified so that a smaller comment is outputted in economy mode,
-     and bugs with when line number classes are outputted in economy mode have been fixed
-  -  Bug where spans had two quotes at the end of the attributes fixed (ie. <span style=".."">)
-  -  Added language files:
-     * Ada (Tux)
-     * Apache log file (Tux)
-     * ASM (Tux)
-     * NSIS (Tux)
-     * Pascal (Tux)
-Version 1.0.0
-  -  Initial Release

examples/includes/geshi/docs/COPYING

@@ -1,340 +0,0 @@
-		    GNU GENERAL PUBLIC LICENSE
-		       Version 2, June 1991
-
- Copyright (C) 1989, 1991 Free Software Foundation, Inc.
-                       59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- Everyone is permitted to copy and distribute verbatim copies
- of this license document, but changing it is not allowed.
-
-			    Preamble
-
-  The licenses for most software are designed to take away your
-freedom to share and change it.  By contrast, the GNU General Public
-License is intended to guarantee your freedom to share and change free
-software--to make sure the software is free for all its users.  This
-General Public License applies to most of the Free Software
-Foundation's software and to any other program whose authors commit to
-using it.  (Some other Free Software Foundation software is covered by
-the GNU Library General Public License instead.)  You can apply it to
-your programs, too.
-
-  When we speak of free software, we are referring to freedom, not
-price.  Our General Public Licenses are designed to make sure that you
-have the freedom to distribute copies of free software (and charge for
-this service if you wish), that you receive source code or can get it
-if you want it, that you can change the software or use pieces of it
-in new free programs; and that you know you can do these things.
-
-  To protect your rights, we need to make restrictions that forbid
-anyone to deny you these rights or to ask you to surrender the rights.
-These restrictions translate to certain responsibilities for you if you
-distribute copies of the software, or if you modify it.
-
-  For example, if you distribute copies of such a program, whether
-gratis or for a fee, you must give the recipients all the rights that
-you have.  You must make sure that they, too, receive or can get the
-source code.  And you must show them these terms so they know their
-rights.
-
-  We protect your rights with two steps: (1) copyright the software, and
-(2) offer you this license which gives you legal permission to copy,
-distribute and/or modify the software.
-
-  Also, for each author's protection and ours, we want to make certain
-that everyone understands that there is no warranty for this free
-software.  If the software is modified by someone else and passed on, we
-want its recipients to know that what they have is not the original, so
-that any problems introduced by others will not reflect on the original
-authors' reputations.
-
-  Finally, any free program is threatened constantly by software
-patents.  We wish to avoid the danger that redistributors of a free
-program will individually obtain patent licenses, in effect making the
-program proprietary.  To prevent this, we have made it clear that any
-patent must be licensed for everyone's free use or not licensed at all.
-
-  The precise terms and conditions for copying, distribution and
-modification follow.
-
-		    GNU GENERAL PUBLIC LICENSE
-   TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION
-
-  0. This License applies to any program or other work which contains
-a notice placed by the copyright holder saying it may be distributed
-under the terms of this General Public License.  The "Program", below,
-refers to any such program or work, and a "work based on the Program"
-means either the Program or any derivative work under copyright law:
-that is to say, a work containing the Program or a portion of it,
-either verbatim or with modifications and/or translated into another
-language.  (Hereinafter, translation is included without limitation in
-the term "modification".)  Each licensee is addressed as "you".
-
-Activities other than copying, distribution and modification are not
-covered by this License; they are outside its scope.  The act of
-running the Program is not restricted, and the output from the Program
-is covered only if its contents constitute a work based on the
-Program (independent of having been made by running the Program).
-Whether that is true depends on what the Program does.
-
-  1. You may copy and distribute verbatim copies of the Program's
-source code as you receive it, in any medium, provided that you
-conspicuously and appropriately publish on each copy an appropriate
-copyright notice and disclaimer of warranty; keep intact all the
-notices that refer to this License and to the absence of any warranty;
-and give any other recipients of the Program a copy of this License
-along with the Program.
-
-You may charge a fee for the physical act of transferring a copy, and
-you may at your option offer warranty protection in exchange for a fee.
-
-  2. You may modify your copy or copies of the Program or any portion
-of it, thus forming a work based on the Program, and copy and
-distribute such modifications or work under the terms of Section 1
-above, provided that you also meet all of these conditions:
-
-    a) You must cause the modified files to carry prominent notices
-    stating that you changed the files and the date of any change.
-
-    b) You must cause any work that you distribute or publish, that in
-    whole or in part contains or is derived from the Program or any
-    part thereof, to be licensed as a whole at no charge to all third
-    parties under the terms of this License.
-
-    c) If the modified program normally reads commands interactively
-    when run, you must cause it, when started running for such
-    interactive use in the most ordinary way, to print or display an
-    announcement including an appropriate copyright notice and a
-    notice that there is no warranty (or else, saying that you provide
-    a warranty) and that users may redistribute the program under
-    these conditions, and telling the user how to view a copy of this
-    License.  (Exception: if the Program itself is interactive but
-    does not normally print such an announcement, your work based on
-    the Program is not required to print an announcement.)
-
-These requirements apply to the modified work as a whole.  If
-identifiable sections of that work are not derived from the Program,
-and can be reasonably considered independent and separate works in
-themselves, then this License, and its terms, do not apply to those
-sections when you distribute them as separate works.  But when you
-distribute the same sections as part of a whole which is a work based
-on the Program, the distribution of the whole must be on the terms of
-this License, whose permissions for other licensees extend to the
-entire whole, and thus to each and every part regardless of who wrote it.
-
-Thus, it is not the intent of this section to claim rights or contest
-your rights to work written entirely by you; rather, the intent is to
-exercise the right to control the distribution of derivative or
-collective works based on the Program.
-
-In addition, mere aggregation of another work not based on the Program
-with the Program (or with a work based on the Program) on a volume of
-a storage or distribution medium does not bring the other work under
-the scope of this License.
-
-  3. You may copy and distribute the Program (or a work based on it,
-under Section 2) in object code or executable form under the terms of
-Sections 1 and 2 above provided that you also do one of the following:
-
-    a) Accompany it with the complete corresponding machine-readable
-    source code, which must be distributed under the terms of Sections
-    1 and 2 above on a medium customarily used for software interchange; or,
-
-    b) Accompany it with a written offer, valid for at least three
-    years, to give any third party, for a charge no more than your
-    cost of physically performing source distribution, a complete
-    machine-readable copy of the corresponding source code, to be
-    distributed under the terms of Sections 1 and 2 above on a medium
-    customarily used for software interchange; or,
-
-    c) Accompany it with the information you received as to the offer
-    to distribute corresponding source code.  (This alternative is
-    allowed only for noncommercial distribution and only if you
-    received the program in object code or executable form with such
-    an offer, in accord with Subsection b above.)
-
-The source code for a work means the preferred form of the work for
-making modifications to it.  For an executable work, complete source
-code means all the source code for all modules it contains, plus any
-associated interface definition files, plus the scripts used to
-control compilation and installation of the executable.  However, as a
-special exception, the source code distributed need not include
-anything that is normally distributed (in either source or binary
-form) with the major components (compiler, kernel, and so on) of the
-operating system on which the executable runs, unless that component
-itself accompanies the executable.
-
-If distribution of executable or object code is made by offering
-access to copy from a designated place, then offering equivalent
-access to copy the source code from the same place counts as
-distribution of the source code, even though third parties are not
-compelled to copy the source along with the object code.
-
-  4. You may not copy, modify, sublicense, or distribute the Program
-except as expressly provided under this License.  Any attempt
-otherwise to copy, modify, sublicense or distribute the Program is
-void, and will automatically terminate your rights under this License.
-However, parties who have received copies, or rights, from you under
-this License will not have their licenses terminated so long as such
-parties remain in full compliance.
-
-  5. You are not required to accept this License, since you have not
-signed it.  However, nothing else grants you permission to modify or
-distribute the Program or its derivative works.  These actions are
-prohibited by law if you do not accept this License.  Therefore, by
-modifying or distributing the Program (or any work based on the
-Program), you indicate your acceptance of this License to do so, and
-all its terms and conditions for copying, distributing or modifying
-the Program or works based on it.
-
-  6. Each time you redistribute the Program (or any work based on the
-Program), the recipient automatically receives a license from the
-original licensor to copy, distribute or modify the Program subject to
-these terms and conditions.  You may not impose any further
-restrictions on the recipients' exercise of the rights granted herein.
-You are not responsible for enforcing compliance by third parties to
-this License.
-
-  7. If, as a consequence of a court judgment or allegation of patent
-infringement or for any other reason (not limited to patent issues),
-conditions are imposed on you (whether by court order, agreement or
-otherwise) that contradict the conditions of this License, they do not
-excuse you from the conditions of this License.  If you cannot
-distribute so as to satisfy simultaneously your obligations under this
-License and any other pertinent obligations, then as a consequence you
-may not distribute the Program at all.  For example, if a patent
-license would not permit royalty-free redistribution of the Program by
-all those who receive copies directly or indirectly through you, then
-the only way you could satisfy both it and this License would be to
-refrain entirely from distribution of the Program.
-
-If any portion of this section is held invalid or unenforceable under
-any particular circumstance, the balance of the section is intended to
-apply and the section as a whole is intended to apply in other
-circumstances.
-
-It is not the purpose of this section to induce you to infringe any
-patents or other property right claims or to contest validity of any
-such claims; this section has the sole purpose of protecting the
-integrity of the free software distribution system, which is
-implemented by public license practices.  Many people have made
-generous contributions to the wide range of software distributed
-through that system in reliance on consistent application of that
-system; it is up to the author/donor to decide if he or she is willing
-to distribute software through any other system and a licensee cannot
-impose that choice.
-
-This section is intended to make thoroughly clear what is believed to
-be a consequence of the rest of this License.
-
-  8. If the distribution and/or use of the Program is restricted in
-certain countries either by patents or by copyrighted interfaces, the
-original copyright holder who places the Program under this License
-may add an explicit geographical distribution limitation excluding
-those countries, so that distribution is permitted only in or among
-countries not thus excluded.  In such case, this License incorporates
-the limitation as if written in the body of this License.
-
-  9. The Free Software Foundation may publish revised and/or new versions
-of the General Public License from time to time.  Such new versions will
-be similar in spirit to the present version, but may differ in detail to
-address new problems or concerns.
-
-Each version is given a distinguishing version number.  If the Program
-specifies a version number of this License which applies to it and "any
-later version", you have the option of following the terms and conditions
-either of that version or of any later version published by the Free
-Software Foundation.  If the Program does not specify a version number of
-this License, you may choose any version ever published by the Free Software
-Foundation.
-
-  10. If you wish to incorporate parts of the Program into other free
-programs whose distribution conditions are different, write to the author
-to ask for permission.  For software which is copyrighted by the Free
-Software Foundation, write to the Free Software Foundation; we sometimes
-make exceptions for this.  Our decision will be guided by the two goals
-of preserving the free status of all derivatives of our free software and
-of promoting the sharing and reuse of software generally.
-
-			    NO WARRANTY
-
-  11. BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY
-FOR THE PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE LAW.  EXCEPT WHEN
-OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES
-PROVIDE THE PROGRAM "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED
-OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
-MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.  THE ENTIRE RISK AS
-TO THE QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH YOU.  SHOULD THE
-PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING,
-REPAIR OR CORRECTION.
-
-  12. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING
-WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY AND/OR
-REDISTRIBUTE THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES,
-INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING
-OUT OF THE USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED
-TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY
-YOU OR THIRD PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER
-PROGRAMS), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE
-POSSIBILITY OF SUCH DAMAGES.
-
-		     END OF TERMS AND CONDITIONS
-
-	    How to Apply These Terms to Your New Programs
-
-  If you develop a new program, and you want it to be of the greatest
-possible use to the public, the best way to achieve this is to make it
-free software which everyone can redistribute and change under these terms.
-
-  To do so, attach the following notices to the program.  It is safest
-to attach them to the start of each source file to most effectively
-convey the exclusion of warranty; and each file should have at least
-the "copyright" line and a pointer to where the full notice is found.
-
-    <one line to give the program's name and a brief idea of what it does.>
-    Copyright (C) <year>  <name of author>
-
-    This program is free software; you can redistribute it and/or modify
-    it under the terms of the GNU General Public License as published by
-    the Free Software Foundation; either version 2 of the License, or
-    (at your option) any later version.
-
-    This program is distributed in the hope that it will be useful,
-    but WITHOUT ANY WARRANTY; without even the implied warranty of
-    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-    GNU General Public License for more details.
-
-    You should have received a copy of the GNU General Public License
-    along with this program; if not, write to the Free Software
-    Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
-
-
-Also add information on how to contact you by electronic and paper mail.
-
-If the program is interactive, make it output a short notice like this
-when it starts in an interactive mode:
-
-    Gnomovision version 69, Copyright (C) year name of author
-    Gnomovision comes with ABSOLUTELY NO WARRANTY; for details type `show w'.
-    This is free software, and you are welcome to redistribute it
-    under certain conditions; type `show c' for details.
-
-The hypothetical commands `show w' and `show c' should show the appropriate
-parts of the General Public License.  Of course, the commands you use may
-be called something other than `show w' and `show c'; they could even be
-mouse-clicks or menu items--whatever suits your program.
-
-You should also get your employer (if you work as a programmer) or your
-school, if any, to sign a "copyright disclaimer" for the program, if
-necessary.  Here is a sample; alter the names:
-
-  Yoyodyne, Inc., hereby disclaims all copyright interest in the program
-  `Gnomovision' (which makes passes at compilers) written by James Hacker.
-
-  <signature of Ty Coon>, 1 April 1989
-  Ty Coon, President of Vice
-
-This General Public License does not permit incorporating your program into
-proprietary programs.  If your program is a subroutine library, you may
-consider it more useful to permit linking proprietary applications with the
-library.  If this is what you want to do, use the GNU Library General
-Public License instead of this License.

examples/includes/geshi/docs/README

@@ -1,33 +0,0 @@
-
-        GeSHi - GEneric Syntax HIghlighter
-        ----------------------------------
-                 Version 1.0.8
-
-Author:          Nigel McNie, Benny Baumann
-Email:           nigel@geshi.org, BenBE@omorphia.de
-GeSHi Website:   http://qbnz.com/highlighter
-
-GeSHi is a generic syntax highlighter, written in PHP. You simply
-input the source code you wish to highlight with the language you
-wish to use, and the output will be a file syntax highlighted to
-XHTML standards.
-
-For more information on how to use GeSHi, please consult the
-documentation. If you got this readme from a GeSHi package, then
-the documentation is available in the docs/ directory. Documentation
-is also available at http://qbnz.com/highlighter/documentation.php
-
-If you think you've found a bug in GeSHi, contact me with a bug
-report at BenBE@omorphia.de, or submit it to the bug tracker at
-http://sourceforge.net/tracker/?group_id=114997&atid=670231. Be
-aware that minor highlighting errors may well just be incorrect
-language files, but if you do find something major please contact me.
-
-And if you're using GeSHi as a plugin/mod for some other software,
-please tell me about it! It's worth a link to you, and I can give
-you specialist help if you need it.
-
-GeSHi is free software, released under the GNU GPL. Please see the
-COPYING file for more information. If you do modify this program,
-please tell me about it! Perhaps you've made a good improvement that
-I can learn from :)

examples/includes/geshi/docs/THANKS

@@ -1,163 +0,0 @@
-
-             THANKS - List of credits for GeSHi
-
-I owe these people/groups my thanks for help with GeSHi. Thanks, guys!
-
-- Amit Gupta            - Thanks for all that constructive criticism - it's
-                          a great help for making GeSHi even better. And
-                          thanks for the Wordpress plugin! (Anyone who is
-                          interested in the plugin can visit:
-                          http://blog.igeek.info/still-fresh/category/wp-plugins/igsyntax-hiliter/)
-- Andreas Gohr          - Thanks for language files and for using GeSHi for DokuWiki
-                          (http://www.splitbrain.org/dokuwiki/wiki:dokuwiki). And thanks
-                          for all your criticisms and for that stylesheet-maker code :).
-                          Also, thanks for the UTF-8 patch.
-- Andreas von Oettingen - Thanks for those great ideas! :)
-- bbspliff              - Thanks for pointing out that bug (pity I already
-                          found it though ;))
-- Benny Baumann         - Thanks for your innumerable suggestions for improvements, and your
-                          work on Delphi support :)
-- Ben Keen              - Thanks for the language files and pointing out some
-                          ideas for future releases. Lookin' forward to seeing that
-                          software soon! ;)
-- Brian Cheesman        - Thanks for using GeSHi in phpCvsView, and for the suggestion about
-                          extension => language lookup
-- Christian Weiske      - Thanks for the inspiration for creating advanced regexp
-                          highlighting :D
-- Cliff Stanford        - Thanks for the hardquote support for C# and Perl (can be used elsewhere
-                          I'm sure)
-- David Gartner         - Thanks for using GeSHi in net2ftp, and for the idea about a load_from_file
-                          method
-- forum.qbasicnews.com  - Thanks for putting up with the crappy versions
-                          that I "forced" on you guys before ;)
-- Jack Lloyd            - Thanks for pointing out the versioning and method CSS bugs, and giving
-                          me the extra C/C++ keywords
-- Karim Scheik          - Thanks for the php5 support report
-- Marcin Gryszkalis     - Thanks for those links for C, Java, Perl
-- M. Uli Kusterer       - Thanks for the idea about URL case conversion
-- Milian Wolff          - Thanks for the loads of optimizations
-                        - Thanks for helping with implementation of various features
-- Roberto Armellin      - Thanks for pointing out some flaws in GeSHi (that will be solved
-                          in 1.2 guaranteed)
-- Sterling Christensen  - Thanks for those links to language specs
-- Tux                   - Thanks for making all those language files :D
-- zbw                   - Thanks for proving a phpBB port was possible
-
-PEOPE WHO MADE LANGUAGE FILES
-
-- ABAP                   Andres Picazo
-- Actionscript           Steffen Krause (french translation by NikO)
-- ActionScript 3         Jordi Boggiano (version for ActionScript3 and MXML)
-- Ada                    Tux
-- Apache                 Tux
-- Applescript            Stephan Klimek
-- Apt sources.list       Milian Wolff
-- ASM                    Tux
-- ASP                    Amit Gupta
-- AutoIT                 mastrboy
-- AviSynth               Ryan Jones
-- Bash                   Andreas Gohr
-- Basic4GL               Matthew Webb
-- BlitzBasic             P<>draig O`Connel
-- BNF                    Rowan Rodrik van der Molen
-- Boo                    Marcus Griep
-- Brainfuck \ Brainfork  Benny Baumann
-- C++                    Dennis Bayer, M. Uli Kusterer
-- C++/QT                 Iulian M
-- C#                     Alan Juden
-- C for Macs             M. Uli Kusterer
-- CADDCL                 Roberto Rossi
-- CadLisp                Roberto Rossi
-- CDFG                   John Horigan
-- CIL                    Marcus Griep
-- COBOL                  Benny Baumann
-- ColdFusion             Diego
-- D                      Thomas Kuehne
-- DCS                    Stelio Passaris
-- Delphi                 Járja Norbert, Benny Baumann
-- Div                    Gabriel Lorenzo
-- DOS                    Alessandro Staltari
-- Eiffel                 Zoran Simic
-- eMail \ mbox           Benny Baumann
-- FreeBasic              Roberto Rossi
-- Fortran                Cedric Arrabie
-- glSlang                Benny Baumann
-- Gettext                Milian Wolff
-- GNU make               Neil Bird
-- Gnuplot                Milian Wolff
-- GML                    José Jorge Enríquez Rodríguez
-- Groovy                 Ivan F. Villanueva B.
-- Haskell                Dagit
-- HQ9+                   Benny Baumann
-- Ini                    Deguix
-- Inno                   Thomas Klinger
-- INTERCAL               Benny Baumann
-- Java 5                 Clemens Bruckmann
-- Javascript             Ben Keen
-- KiXtart                Riley McArdle
-- KLone C                Mickael Auger
-- KLone C++              Mickael Auger
-- LaTeX                  Matthais Pospiech
-- Lisp                   Roberto Rossi
-- Locomotive Basic       Nacho Cabanes
-- LOLcode                Benny Baumann
-- LScript                Beau McGuigan
-- LSL2                   William Fry
-- Lua                    Roberto Rossi
-- m86k                   Benny Baumann
-- mIRC                   Alberto de Areba Sánchez
-- Modula-3               Martin Bishop
-- MPASM                  Bakalex
-- MXML                   David Spurr
-- MySQL                  Carl Fürstenberg, Marjolein Katsma
-- NSIS                   Tux, Deguix
-- Oberon-2               Mike Mol
-- Objective C            M. Uli Kusterer
-- Ocaml                  Flaie
-- Ocaml-brief            Flaie
-- OpenOffice.org BASIC   Roberto Rossi
-- Oracle 8               Guy Wicks
-- Oracle 11i             Simon Redhead
-- Pascal                 Tux
-- Perl                   Andreas Gohr, Ben Keen
-- PIC16xxx assembler     Phil Mattison
-- Pixel Bender           Richard Olsson
-- PL/SQL                 Victor Engmark
-- POV-Ray                Carl Fürstenberg
-- PowerShell             Frode Aarebrot
-- Progress               Marco Aurelio de Pasqual
-- Prolog                 Benny Baumann
-- ProvideX               Jeff Wilder
-- Python                 Roberto Rossi
-- Rails                  Moises Deniz
-- Rebol                  Lecanu Guillaume
-- Reg                    SmokingRope
-- Robots                 Christian Lescuyer
-- Ruby                   Amit Gupta, Moises Deniz
-- SAS                    Galen Johnson
-- SDLBasic               Roberto Rossi
-- Scheme                 Jon Raphaelson
-- SciLab                 Christophe David
-- Smalltalk              Bananeweizen
-- Smarty                 Alan Juden
-- T-SQL                  Duncan Lock
-- TeraTerm               Boris Maisuradze
-- Text                   SmokingRope
-- TCL                    Reid van Melle
-- thinBasic              Eros Olmi
-- TypoScript             Jan-Philipp Halle
-- Uno IDL                Cedric Bosdonnat
-- VB                     Roberto Rossi
-- VB.NET                 Alan Juden
-- Verilog                Günter Dannoritzer
-- VIM Script             Swaroop C H
-- Visual FoxPro          Roberto Armellin
-- Visual Prolog          Thomas Linder Puls
-- Whitespace             Benny Baumann
-- Winbatch               Craig Storey
-- X++                    Simon Butcher
-- Xorg config            Milian Wolff
-- Z80 Assembler          Benny Baumann
-
-Do you want your name in here? Help me out! Make a language file, or suggest a new
-feature, or make a plugin for GeSHi for some other software, then tell me about it!

examples/includes/geshi/docs/TODO

@@ -1,71 +0,0 @@
-       TODO - List of things to do as of 2005/01/29
-
-Suggestions for things to add are welcome, if you have a feature request you
-can either post it to the forums:
-
-http://qbnz.com/highlighter/forum.php
-
-Or to the feature request tracker:
-
-http://sourceforge.net/tracker/?group_id=114997&atid=670234
-
-
-  TODO for version 1.0.8.x
-
-- Rework the load_from_file method and the one for getting a file extension,
-  as documented in the source.
-- use analogous vars to $next_comment_regexp_pos for more GeSHi structures,
-  should reduce number of functions called and hence improve performance
-- make a set of default colours which can be used in the language files.
-  this way we can give languages a uniform look and maybe even add "themes"
-- Get better coverage in our coderepo
-- README / INSTALL / ... file for phpdoc integration => take geshi-doc.*?
-- rework HARDQUOTE + styles, currently this is a bit of a mess imo (milian)
-- Allow per-keywordgroup AutoCaps/NoCaps
-- Complete API to support latest features
-    set_number_style ($key missing)
-    set_string_style ($key missing)
-    set_case_keywords (support for per_keywordgroup AutoCaps)
-
-
-  TODO for version 1.2.0
-
-- Rewrite engine to use remove/replace method (will hopefully almost
-  eliminate the need for regular expressions except for numbers/methods
-  etc). This will also assist for making different output formats [DONE]
-- "Intelligent" output format - eg if the user doesn't want lines to
-  wrap and wants line numbers don't use <ol>, use the <table> method
-  instead. (This saves on output)
-- Clear split between "public" and "private" methods [DONE]
-- PHP5 version
-- "Themes" for styles - basically pre-made stylesheets that can be used
-  to highlight code of any language in a similar manner [DONE]
-- "Dialects" for languages - eg php4, php5. One master language definition
-  file, and a bunch of "specialised" dialect files for each language
-  Ability to specify a "specialised" dialect as default? [DONE]
-- Look at load/memory usage and try to reduce
-- Make tabs into tab-stops like a normal editor [DONE]
-- Ability to add more than one multiline comment or string [DONE]
-- Ability to specify that strings cannot be multiline [DONE]
-- Create a "wrapper" class for ultra-easy use
-- Code written in a style that conforms to a phpdoc utility [DONE, PEAR]
-- Dig functions/methods out of code and where they are called make an internal
-  link back to their definition
-
-
-  TODO for version 2.0.0
-
-- Support for multiple output formats (XHTML, XML, PDF, RTF etc) [DONE IN 1.2]
-- Support for auto-indent/code "beautifing"
-- Option for "Lite" highlighting - aims for speed and low server load
-- "Intelligent" highlighting inside comments, and ability to highlight
-  source in multiple languages at once (eg PHP+HTML) [DONE IN 1.2]
-- Perhaps a script on the GeSHi site that would map urls to appropriate
-  definitions and relocate the user? (eg, java documentation is
-  structured in such a way that urls are not able to be used with GeSHi.
-  Instead the URL could become:
-  http://qbnz.com/highlighter/redirect.php?lang=java&kw=KeyWord
-  and that script would redirect to the correct location.
-  [BETTER FIX IN 1.2]
-
-              $Id: TODO 1727 2008-08-08 13:36:52Z benbe $

examples/includes/geshi/docs/api/blank.html

@@ -1,13 +0,0 @@
-<html>
-<head>
-	<title>GeSHi 1.0.8</title>
-			<link rel="stylesheet" href="media/stylesheet.css" />
-			<meta http-equiv='Content-Type' content='text/html; charset=iso-8859-1'/>
-</head>
-<body>
-<div align="center"><h1>GeSHi 1.0.8</h1></div>
-<b>Welcome to geshi!</b><br />
-<br />
-This documentation was generated by <a href="http://www.phpdoc.org">phpDocumentor v1.4.2</a><br />
-</body>
-</html>

examples/includes/geshi/docs/api/classtrees_geshi.html

@@ -1,24 +0,0 @@
-<?xml version="1.0" encoding="iso-8859-1"?>
-<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
-  <html xmlns="http://www.w3.org/1999/xhtml">
-		<head>
-			<!-- template designed by Marco Von Ballmoos -->
-			<title></title>
-			<link rel="stylesheet" href="media/stylesheet.css" />
-			<meta http-equiv='Content-Type' content='text/html; charset=iso-8859-1'/>
-		</head>
-		<body>
-						
-<!-- Start of Class Data -->
-<H2>
-	
-</H2>
-<h2>Root class GeSHi</h2>
-<ul>
-<li><a href="geshi/core/GeSHi.html">GeSHi</a></li></ul>
-
-	<p class="notes" id="credit">
-		Documentation generated on Thu, 25 Dec 2008 14:34:34 +0100 by <a href="http://www.phpdoc.org" target="_blank">phpDocumentor 1.4.2</a>
-	</p>
-	</body>
-</html>

examples/includes/geshi/docs/api/elementindex.html

@@ -1,867 +0,0 @@
-<?xml version="1.0" encoding="iso-8859-1"?>
-<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
-  <html xmlns="http://www.w3.org/1999/xhtml">
-		<head>
-			<!-- template designed by Marco Von Ballmoos -->
-			<title></title>
-			<link rel="stylesheet" href="media/stylesheet.css" />
-			<meta http-equiv='Content-Type' content='text/html; charset=iso-8859-1'/>
-		</head>
-		<body>
-						<a name="top"></a>
-<h2>Full index</h2>
-<h3>Package indexes</h3>
-<ul>
-	<li><a href="elementindex_geshi.html">geshi</a></li>
-</ul>
-<br />
-<div class="index-letter-menu">
-	<a class="index-letter" href="elementindex.html#a">a</a>
-	<a class="index-letter" href="elementindex.html#d">d</a>
-	<a class="index-letter" href="elementindex.html#e">e</a>
-	<a class="index-letter" href="elementindex.html#g">g</a>
-	<a class="index-letter" href="elementindex.html#h">h</a>
-	<a class="index-letter" href="elementindex.html#l">l</a>
-	<a class="index-letter" href="elementindex.html#o">o</a>
-	<a class="index-letter" href="elementindex.html#p">p</a>
-	<a class="index-letter" href="elementindex.html#r">r</a>
-	<a class="index-letter" href="elementindex.html#s">s</a>
-</div>
-
-	<a name="a"></a>
-	<div class="index-letter-section">
-		<div style="float: left" class="index-letter-title">a</div>
-		<div style="float: right"><a href="#top">top</a></div>
-		<div style="clear: both"></div>
-	</div>
-	<dl>
-			<dt class="field">
-						<img src="media/images/Method.png" alt="Method" title="Method" /></title>
-			<span class="method-title">add_keyword</span>
-					</dt>
-		<dd class="index-item-body">
-			<div class="index-item-details"><a href="geshi/core/GeSHi.html#methodadd_keyword">GeSHi::add_keyword()</a> in geshi.php</div>
-							<div class="index-item-description">Adds a keyword to a keyword group for highlighting</div>
-					</dd>
-			<dt class="field">
-						<img src="media/images/Method.png" alt="Method" title="Method" /></title>
-			<span class="method-title">add_keyword_group</span>
-					</dt>
-		<dd class="index-item-body">
-			<div class="index-item-details"><a href="geshi/core/GeSHi.html#methodadd_keyword_group">GeSHi::add_keyword_group()</a> in geshi.php</div>
-							<div class="index-item-description">Creates a new keyword group</div>
-					</dd>
-		</dl>
-	<a name="d"></a>
-	<div class="index-letter-section">
-		<div style="float: left" class="index-letter-title">d</div>
-		<div style="float: right"><a href="#top">top</a></div>
-		<div style="clear: both"></div>
-	</div>
-	<dl>
-			<dt class="field">
-						<img src="media/images/Method.png" alt="Method" title="Method" /></title>
-			<span class="method-title">disable_highlighting</span>
-					</dt>
-		<dd class="index-item-body">
-			<div class="index-item-details"><a href="geshi/core/GeSHi.html#methoddisable_highlighting">GeSHi::disable_highlighting()</a> in geshi.php</div>
-							<div class="index-item-description">Disables all highlighting</div>
-					</dd>
-		</dl>
-	<a name="e"></a>
-	<div class="index-letter-section">
-		<div style="float: left" class="index-letter-title">e</div>
-		<div style="float: right"><a href="#top">top</a></div>
-		<div style="clear: both"></div>
-	</div>
-	<dl>
-			<dt class="field">
-						<img src="media/images/Method.png" alt="Method" title="Method" /></title>
-			<span class="method-title">enable_classes</span>
-					</dt>
-		<dd class="index-item-body">
-			<div class="index-item-details"><a href="geshi/core/GeSHi.html#methodenable_classes">GeSHi::enable_classes()</a> in geshi.php</div>
-							<div class="index-item-description">Sets whether CSS classes should be used to highlight the source. Default  is off, calling this method with no arguments will turn it on</div>
-					</dd>
-			<dt class="field">
-						<img src="media/images/Method.png" alt="Method" title="Method" /></title>
-			<span class="method-title">enable_highlighting</span>
-					</dt>
-		<dd class="index-item-body">
-			<div class="index-item-details"><a href="geshi/core/GeSHi.html#methodenable_highlighting">GeSHi::enable_highlighting()</a> in geshi.php</div>
-							<div class="index-item-description">Enables all highlighting</div>
-					</dd>
-			<dt class="field">
-						<img src="media/images/Method.png" alt="Method" title="Method" /></title>
-			<span class="method-title">enable_ids</span>
-					</dt>
-		<dd class="index-item-body">
-			<div class="index-item-details"><a href="geshi/core/GeSHi.html#methodenable_ids">GeSHi::enable_ids()</a> in geshi.php</div>
-							<div class="index-item-description">Whether CSS IDs should be added to each line</div>
-					</dd>
-			<dt class="field">
-						<img src="media/images/Method.png" alt="Method" title="Method" /></title>
-			<span class="method-title">enable_important_blocks</span>
-					</dt>
-		<dd class="index-item-body">
-			<div class="index-item-details"><a href="geshi/core/GeSHi.html#methodenable_important_blocks">GeSHi::enable_important_blocks()</a> in geshi.php</div>
-							<div class="index-item-description">Sets whether context-important blocks are highlighted</div>
-					</dd>
-			<dt class="field">
-						<img src="media/images/Method.png" alt="Method" title="Method" /></title>
-			<span class="method-title">enable_inner_code_block</span>
-					</dt>
-		<dd class="index-item-body">
-			<div class="index-item-details"><a href="geshi/core/GeSHi.html#methodenable_inner_code_block">GeSHi::enable_inner_code_block()</a> in geshi.php</div>
-							<div class="index-item-description">Sets whether to force a surrounding block around  the highlighted code or not</div>
-					</dd>
-			<dt class="field">
-						<img src="media/images/Method.png" alt="Method" title="Method" /></title>
-			<span class="method-title">enable_keyword_links</span>
-					</dt>
-		<dd class="index-item-body">
-			<div class="index-item-details"><a href="geshi/core/GeSHi.html#methodenable_keyword_links">GeSHi::enable_keyword_links()</a> in geshi.php</div>
-							<div class="index-item-description">Turns linking of keywords on or off.</div>
-					</dd>
-			<dt class="field">
-						<img src="media/images/Method.png" alt="Method" title="Method" /></title>
-			<span class="method-title">enable_line_numbers</span>
-					</dt>
-		<dd class="index-item-body">
-			<div class="index-item-details"><a href="geshi/core/GeSHi.html#methodenable_line_numbers">GeSHi::enable_line_numbers()</a> in geshi.php</div>
-							<div class="index-item-description">Sets whether line numbers should be displayed.</div>
-					</dd>
-			<dt class="field">
-						<img src="media/images/Method.png" alt="Method" title="Method" /></title>
-			<span class="method-title">enable_multiline_span</span>
-					</dt>
-		<dd class="index-item-body">
-			<div class="index-item-details"><a href="geshi/core/GeSHi.html#methodenable_multiline_span">GeSHi::enable_multiline_span()</a> in geshi.php</div>
-							<div class="index-item-description">Sets wether spans and other HTML markup generated by GeSHi can  span over multiple lines or not. Defaults to true to reduce overhead.</div>
-					</dd>
-			<dt class="field">
-						<img src="media/images/Method.png" alt="Method" title="Method" /></title>
-			<span class="method-title">enable_strict_mode</span>
-					</dt>
-		<dd class="index-item-body">
-			<div class="index-item-details"><a href="geshi/core/GeSHi.html#methodenable_strict_mode">GeSHi::enable_strict_mode()</a> in geshi.php</div>
-							<div class="index-item-description">Enables/disables strict highlighting. Default is off, calling this  method without parameters will turn it on. See documentation  for more details on strict mode and where to use it.</div>
-					</dd>
-			<dt class="field">
-						<img src="media/images/Method.png" alt="Method" title="Method" /></title>
-			<span class="method-title">error</span>
-					</dt>
-		<dd class="index-item-body">
-			<div class="index-item-details"><a href="geshi/core/GeSHi.html#methoderror">GeSHi::error()</a> in geshi.php</div>
-							<div class="index-item-description">Returns an error message associated with the last GeSHi operation,  or false if no error has occured</div>
-					</dd>
-		</dl>
-	<a name="g"></a>
-	<div class="index-letter-section">
-		<div style="float: left" class="index-letter-title">g</div>
-		<div style="float: right"><a href="#top">top</a></div>
-		<div style="clear: both"></div>
-	</div>
-	<dl>
-			<dt class="field">
-						<img src="media/images/Constructor.png" alt="Method" title="Method" /></title>
-			<span class="method-title">GeSHi</span>
-					</dt>
-		<dd class="index-item-body">
-			<div class="index-item-details"><a href="geshi/core/GeSHi.html#methodGeSHi">GeSHi::GeSHi()</a> in geshi.php</div>
-							<div class="index-item-description">Creates a new GeSHi object, with source and language</div>
-					</dd>
-			<dt class="field">
-						<img src="media/images/Class.png" alt="Class" title="Class" /></title>
-			GeSHi
-					</dt>
-		<dd class="index-item-body">
-			<div class="index-item-details"><a href="geshi/core/GeSHi.html">GeSHi</a> in geshi.php</div>
-							<div class="index-item-description">The GeSHi Class.</div>
-					</dd>
-			<dt class="field">
-						<img src="media/images/Page.png" alt="Page" title="Page" /></title>
-			<span class="include-title">geshi.php</span>
-					</dt>
-		<dd class="index-item-body">
-			<div class="index-item-details"><a href="geshi/core/_geshi.php.html">geshi.php</a> in geshi.php</div>
-					</dd>
-			<dt class="field">
-						<img src="media/images/Constant.png" alt="Constant" title="Constant" /></title>
-			<span class="const-title">GESHI_ACTIVE</span>
-					</dt>
-		<dd class="index-item-body">
-			<div class="index-item-details"><a href="geshi/core/_geshi.php.html#defineGESHI_ACTIVE">GESHI_ACTIVE</a> in geshi.php</div>
-							<div class="index-item-description">Links in the source in the :active state</div>
-					</dd>
-			<dt class="field">
-						<img src="media/images/Constant.png" alt="Constant" title="Constant" /></title>
-			<span class="const-title">GESHI_CAPS_LOWER</span>
-					</dt>
-		<dd class="index-item-body">
-			<div class="index-item-details"><a href="geshi/core/_geshi.php.html#defineGESHI_CAPS_LOWER">GESHI_CAPS_LOWER</a> in geshi.php</div>
-							<div class="index-item-description">Leave keywords found as the case that they are</div>
-					</dd>
-			<dt class="field">
-						<img src="media/images/Constant.png" alt="Constant" title="Constant" /></title>
-			<span class="const-title">GESHI_CAPS_NO_CHANGE</span>
-					</dt>
-		<dd class="index-item-body">
-			<div class="index-item-details"><a href="geshi/core/_geshi.php.html#defineGESHI_CAPS_NO_CHANGE">GESHI_CAPS_NO_CHANGE</a> in geshi.php</div>
-							<div class="index-item-description">Lowercase keywords found</div>
-					</dd>
-			<dt class="field">
-						<img src="media/images/Constant.png" alt="Constant" title="Constant" /></title>
-			<span class="const-title">GESHI_CAPS_UPPER</span>
-					</dt>
-		<dd class="index-item-body">
-			<div class="index-item-details"><a href="geshi/core/_geshi.php.html#defineGESHI_CAPS_UPPER">GESHI_CAPS_UPPER</a> in geshi.php</div>
-							<div class="index-item-description">Uppercase keywords found</div>
-					</dd>
-			<dt class="field">
-						<img src="media/images/Constant.png" alt="Constant" title="Constant" /></title>
-			<span class="const-title">GESHI_END_IMPORTANT</span>
-					</dt>
-		<dd class="index-item-body">
-			<div class="index-item-details"><a href="geshi/core/_geshi.php.html#defineGESHI_END_IMPORTANT">GESHI_END_IMPORTANT</a> in geshi.php</div>
-							<div class="index-item-description">The ender for important parts of the source</div>
-					</dd>
-			<dt class="field">
-						<img src="media/images/Constant.png" alt="Constant" title="Constant" /></title>
-			<span class="const-title">GESHI_FANCY_LINE_NUMBERS</span>
-					</dt>
-		<dd class="index-item-body">
-			<div class="index-item-details"><a href="geshi/core/_geshi.php.html#defineGESHI_FANCY_LINE_NUMBERS">GESHI_FANCY_LINE_NUMBERS</a> in geshi.php</div>
-							<div class="index-item-description">Use fancy line numbers when building the result</div>
-					</dd>
-			<dt class="field">
-						<img src="media/images/Constant.png" alt="Constant" title="Constant" /></title>
-			<span class="const-title">GESHI_HEADER_DIV</span>
-					</dt>
-		<dd class="index-item-body">
-			<div class="index-item-details"><a href="geshi/core/_geshi.php.html#defineGESHI_HEADER_DIV">GESHI_HEADER_DIV</a> in geshi.php</div>
-							<div class="index-item-description">Use a &quot;div&quot; to surround the source</div>
-					</dd>
-			<dt class="field">
-						<img src="media/images/Constant.png" alt="Constant" title="Constant" /></title>
-			<span class="const-title">GESHI_HEADER_NONE</span>
-					</dt>
-		<dd class="index-item-body">
-			<div class="index-item-details"><a href="geshi/core/_geshi.php.html#defineGESHI_HEADER_NONE">GESHI_HEADER_NONE</a> in geshi.php</div>
-							<div class="index-item-description">Use nothing to surround the source</div>
-					</dd>
-			<dt class="field">
-						<img src="media/images/Constant.png" alt="Constant" title="Constant" /></title>
-			<span class="const-title">GESHI_HEADER_PRE</span>
-					</dt>
-		<dd class="index-item-body">
-			<div class="index-item-details"><a href="geshi/core/_geshi.php.html#defineGESHI_HEADER_PRE">GESHI_HEADER_PRE</a> in geshi.php</div>
-							<div class="index-item-description">Use a &quot;pre&quot; to surround the source</div>
-					</dd>
-			<dt class="field">
-						<img src="media/images/Constant.png" alt="Constant" title="Constant" /></title>
-			<span class="const-title">GESHI_HEADER_PRE_TABLE</span>
-					</dt>
-		<dd class="index-item-body">
-			<div class="index-item-details"><a href="geshi/core/_geshi.php.html#defineGESHI_HEADER_PRE_TABLE">GESHI_HEADER_PRE_TABLE</a> in geshi.php</div>
-							<div class="index-item-description">Use a &quot;table&quot; to surround the source:</div>
-					</dd>
-			<dt class="field">
-						<img src="media/images/Constant.png" alt="Constant" title="Constant" /></title>
-			<span class="const-title">GESHI_HEADER_PRE_VALID</span>
-					</dt>
-		<dd class="index-item-body">
-			<div class="index-item-details"><a href="geshi/core/_geshi.php.html#defineGESHI_HEADER_PRE_VALID">GESHI_HEADER_PRE_VALID</a> in geshi.php</div>
-							<div class="index-item-description">Use a pre to wrap lines when line numbers are enabled or to wrap the whole code.</div>
-					</dd>
-			<dt class="field">
-						<img src="media/images/Function.png" alt="Function" title="Function" /></title>
-			<span class="method-title">geshi_highlight</span>
-					</dt>
-		<dd class="index-item-body">
-			<div class="index-item-details"><a href="geshi/core/_geshi.php.html#functiongeshi_highlight">geshi_highlight()</a> in geshi.php</div>
-							<div class="index-item-description">Easy way to highlight stuff. Behaves just like highlight_string</div>
-					</dd>
-			<dt class="field">
-						<img src="media/images/Constant.png" alt="Constant" title="Constant" /></title>
-			<span class="const-title">GESHI_HOVER</span>
-					</dt>
-		<dd class="index-item-body">
-			<div class="index-item-details"><a href="geshi/core/_geshi.php.html#defineGESHI_HOVER">GESHI_HOVER</a> in geshi.php</div>
-							<div class="index-item-description">Links in the source in the :hover state</div>
-					</dd>
-			<dt class="field">
-						<img src="media/images/Constant.png" alt="Constant" title="Constant" /></title>
-			<span class="const-title">GESHI_LANG_ROOT</span>
-					</dt>
-		<dd class="index-item-body">
-			<div class="index-item-details"><a href="geshi/core/_geshi.php.html#defineGESHI_LANG_ROOT">GESHI_LANG_ROOT</a> in geshi.php</div>
-							<div class="index-item-description">The language file directory for GeSHi</div>
-					</dd>
-			<dt class="field">
-						<img src="media/images/Constant.png" alt="Constant" title="Constant" /></title>
-			<span class="const-title">GESHI_LINK</span>
-					</dt>
-		<dd class="index-item-body">
-			<div class="index-item-details"><a href="geshi/core/_geshi.php.html#defineGESHI_LINK">GESHI_LINK</a> in geshi.php</div>
-							<div class="index-item-description">Links in the source in the :link state</div>
-					</dd>
-			<dt class="field">
-						<img src="media/images/Constant.png" alt="Constant" title="Constant" /></title>
-			<span class="const-title">GESHI_NORMAL_LINE_NUMBERS</span>
-					</dt>
-		<dd class="index-item-body">
-			<div class="index-item-details"><a href="geshi/core/_geshi.php.html#defineGESHI_NORMAL_LINE_NUMBERS">GESHI_NORMAL_LINE_NUMBERS</a> in geshi.php</div>
-							<div class="index-item-description">Use normal line numbers when building the result</div>
-					</dd>
-			<dt class="field">
-						<img src="media/images/Constant.png" alt="Constant" title="Constant" /></title>
-			<span class="const-title">GESHI_NO_LINE_NUMBERS</span>
-					</dt>
-		<dd class="index-item-body">
-			<div class="index-item-details"><a href="geshi/core/_geshi.php.html#defineGESHI_NO_LINE_NUMBERS">GESHI_NO_LINE_NUMBERS</a> in geshi.php</div>
-							<div class="index-item-description">Use no line numbers when building the result</div>
-					</dd>
-			<dt class="field">
-						<img src="media/images/Constant.png" alt="Constant" title="Constant" /></title>
-			<span class="const-title">GESHI_ROOT</span>
-					</dt>
-		<dd class="index-item-body">
-			<div class="index-item-details"><a href="geshi/core/_geshi.php.html#defineGESHI_ROOT">GESHI_ROOT</a> in geshi.php</div>
-							<div class="index-item-description">The root directory for GeSHi</div>
-					</dd>
-			<dt class="field">
-						<img src="media/images/Constant.png" alt="Constant" title="Constant" /></title>
-			<span class="const-title">GESHI_SECURITY_PARANOID</span>
-					</dt>
-		<dd class="index-item-body">
-			<div class="index-item-details"><a href="geshi/core/_geshi.php.html#defineGESHI_SECURITY_PARANOID">GESHI_SECURITY_PARANOID</a> in geshi.php</div>
-							<div class="index-item-description">Tells GeSHi to be paranoid about security settings</div>
-					</dd>
-			<dt class="field">
-						<img src="media/images/Constant.png" alt="Constant" title="Constant" /></title>
-			<span class="const-title">GESHI_START_IMPORTANT</span>
-					</dt>
-		<dd class="index-item-body">
-			<div class="index-item-details"><a href="geshi/core/_geshi.php.html#defineGESHI_START_IMPORTANT">GESHI_START_IMPORTANT</a> in geshi.php</div>
-							<div class="index-item-description">The starter for important parts of the source</div>
-					</dd>
-			<dt class="field">
-						<img src="media/images/Constant.png" alt="Constant" title="Constant" /></title>
-			<span class="const-title">GESHI_VERSION</span>
-					</dt>
-		<dd class="index-item-body">
-			<div class="index-item-details"><a href="geshi/core/_geshi.php.html#defineGESHI_VERSION">GESHI_VERSION</a> in geshi.php</div>
-							<div class="index-item-description">The version of this GeSHi file</div>
-					</dd>
-			<dt class="field">
-						<img src="media/images/Constant.png" alt="Constant" title="Constant" /></title>
-			<span class="const-title">GESHI_VISITED</span>
-					</dt>
-		<dd class="index-item-body">
-			<div class="index-item-details"><a href="geshi/core/_geshi.php.html#defineGESHI_VISITED">GESHI_VISITED</a> in geshi.php</div>
-							<div class="index-item-description">Links in the source in the :visited state</div>
-					</dd>
-			<dt class="field">
-						<img src="media/images/Method.png" alt="Method" title="Method" /></title>
-			<span class="method-title">get_language_name</span>
-					</dt>
-		<dd class="index-item-body">
-			<div class="index-item-details"><a href="geshi/core/GeSHi.html#methodget_language_name">GeSHi::get_language_name()</a> in geshi.php</div>
-							<div class="index-item-description">Gets a human-readable language name (thanks to Simon Patterson  for the idea :))</div>
-					</dd>
-			<dt class="field">
-						<img src="media/images/Method.png" alt="Method" title="Method" /></title>
-			<span class="method-title">get_language_name_from_extension</span>
-					</dt>
-		<dd class="index-item-body">
-			<div class="index-item-details"><a href="geshi/core/GeSHi.html#methodget_language_name_from_extension">GeSHi::get_language_name_from_extension()</a> in geshi.php</div>
-							<div class="index-item-description">Given a file extension, this method returns either a valid geshi language  name, or the empty string if it couldn't be found</div>
-					</dd>
-			<dt class="field">
-						<img src="media/images/Method.png" alt="Method" title="Method" /></title>
-			<span class="method-title">get_multiline_span</span>
-					</dt>
-		<dd class="index-item-body">
-			<div class="index-item-details"><a href="geshi/core/GeSHi.html#methodget_multiline_span">GeSHi::get_multiline_span()</a> in geshi.php</div>
-							<div class="index-item-description">Get current setting for multiline spans, see GeSHi-&gt;enable_multiline_span().</div>
-					</dd>
-			<dt class="field">
-						<img src="media/images/Method.png" alt="Method" title="Method" /></title>
-			<span class="method-title">get_real_tab_width</span>
-					</dt>
-		<dd class="index-item-body">
-			<div class="index-item-details"><a href="geshi/core/GeSHi.html#methodget_real_tab_width">GeSHi::get_real_tab_width()</a> in geshi.php</div>
-							<div class="index-item-description">Returns the tab width to use, based on the current language and user  preference</div>
-					</dd>
-			<dt class="field">
-						<img src="media/images/Method.png" alt="Method" title="Method" /></title>
-			<span class="method-title">get_stylesheet</span>
-					</dt>
-		<dd class="index-item-body">
-			<div class="index-item-details"><a href="geshi/core/GeSHi.html#methodget_stylesheet">GeSHi::get_stylesheet()</a> in geshi.php</div>
-							<div class="index-item-description">Returns a stylesheet for the highlighted code. If $economy mode  is true, we only return the stylesheet declarations that matter for  this code block instead of the whole thing</div>
-					</dd>
-			<dt class="field">
-						<img src="media/images/Method.png" alt="Method" title="Method" /></title>
-			<span class="method-title">get_time</span>
-					</dt>
-		<dd class="index-item-body">
-			<div class="index-item-details"><a href="geshi/core/GeSHi.html#methodget_time">GeSHi::get_time()</a> in geshi.php</div>
-							<div class="index-item-description">Gets the time taken to parse the code</div>
-					</dd>
-		</dl>
-	<a name="h"></a>
-	<div class="index-letter-section">
-		<div style="float: left" class="index-letter-title">h</div>
-		<div style="float: right"><a href="#top">top</a></div>
-		<div style="clear: both"></div>
-	</div>
-	<dl>
-			<dt class="field">
-						<img src="media/images/Method.png" alt="Method" title="Method" /></title>
-			<span class="method-title">highlight_lines_extra</span>
-					</dt>
-		<dd class="index-item-body">
-			<div class="index-item-details"><a href="geshi/core/GeSHi.html#methodhighlight_lines_extra">GeSHi::highlight_lines_extra()</a> in geshi.php</div>
-							<div class="index-item-description">Specifies which lines to highlight extra</div>
-					</dd>
-		</dl>
-	<a name="l"></a>
-	<div class="index-letter-section">
-		<div style="float: left" class="index-letter-title">l</div>
-		<div style="float: right"><a href="#top">top</a></div>
-		<div style="clear: both"></div>
-	</div>
-	<dl>
-			<dt class="field">
-						<img src="media/images/Method.png" alt="Method" title="Method" /></title>
-			<span class="method-title">load_from_file</span>
-					</dt>
-		<dd class="index-item-body">
-			<div class="index-item-details"><a href="geshi/core/GeSHi.html#methodload_from_file">GeSHi::load_from_file()</a> in geshi.php</div>
-							<div class="index-item-description">Given a file name, this method loads its contents in, and attempts</div>
-					</dd>
-		</dl>
-	<a name="o"></a>
-	<div class="index-letter-section">
-		<div style="float: left" class="index-letter-title">o</div>
-		<div style="float: right"><a href="#top">top</a></div>
-		<div style="clear: both"></div>
-	</div>
-	<dl>
-			<dt class="field">
-						<img src="media/images/Method.png" alt="Method" title="Method" /></title>
-			<span class="method-title">optimize_keyword_group</span>
-					</dt>
-		<dd class="index-item-body">
-			<div class="index-item-details"><a href="geshi/core/GeSHi.html#methodoptimize_keyword_group">GeSHi::optimize_keyword_group()</a> in geshi.php</div>
-							<div class="index-item-description">compile optimized regexp list for keyword group</div>
-					</dd>
-		</dl>
-	<a name="p"></a>
-	<div class="index-letter-section">
-		<div style="float: left" class="index-letter-title">p</div>
-		<div style="float: right"><a href="#top">top</a></div>
-		<div style="clear: both"></div>
-	</div>
-	<dl>
-			<dt class="field">
-						<img src="media/images/Method.png" alt="Method" title="Method" /></title>
-			<span class="method-title">parse_code</span>
-					</dt>
-		<dd class="index-item-body">
-			<div class="index-item-details"><a href="geshi/core/GeSHi.html#methodparse_code">GeSHi::parse_code()</a> in geshi.php</div>
-							<div class="index-item-description">Returns the code in $this-&gt;source, highlighted and surrounded by the  nessecary HTML.</div>
-					</dd>
-		</dl>
-	<a name="r"></a>
-	<div class="index-letter-section">
-		<div style="float: left" class="index-letter-title">r</div>
-		<div style="float: right"><a href="#top">top</a></div>
-		<div style="clear: both"></div>
-	</div>
-	<dl>
-			<dt class="field">
-						<img src="media/images/Method.png" alt="Method" title="Method" /></title>
-			<span class="method-title">remove_keyword</span>
-					</dt>
-		<dd class="index-item-body">
-			<div class="index-item-details"><a href="geshi/core/GeSHi.html#methodremove_keyword">GeSHi::remove_keyword()</a> in geshi.php</div>
-							<div class="index-item-description">Removes a keyword from a keyword group</div>
-					</dd>
-			<dt class="field">
-						<img src="media/images/Method.png" alt="Method" title="Method" /></title>
-			<span class="method-title">remove_keyword_group</span>
-					</dt>
-		<dd class="index-item-body">
-			<div class="index-item-details"><a href="geshi/core/GeSHi.html#methodremove_keyword_group">GeSHi::remove_keyword_group()</a> in geshi.php</div>
-							<div class="index-item-description">Removes a keyword group</div>
-					</dd>
-		</dl>
-	<a name="s"></a>
-	<div class="index-letter-section">
-		<div style="float: left" class="index-letter-title">s</div>
-		<div style="float: right"><a href="#top">top</a></div>
-		<div style="clear: both"></div>
-	</div>
-	<dl>
-			<dt class="field">
-						<img src="media/images/Method.png" alt="Method" title="Method" /></title>
-			<span class="method-title">set_brackets_highlighting</span>
-					</dt>
-		<dd class="index-item-body">
-			<div class="index-item-details"><a href="geshi/core/GeSHi.html#methodset_brackets_highlighting">GeSHi::set_brackets_highlighting()</a> in geshi.php</div>
-							<div class="index-item-description">Turns highlighting on/off for brackets</div>
-					</dd>
-			<dt class="field">
-						<img src="media/images/Method.png" alt="Method" title="Method" /></title>
-			<span class="method-title">set_brackets_style</span>
-					</dt>
-		<dd class="index-item-body">
-			<div class="index-item-details"><a href="geshi/core/GeSHi.html#methodset_brackets_style">GeSHi::set_brackets_style()</a> in geshi.php</div>
-							<div class="index-item-description">Sets the styles for brackets. If $preserve_defaults is  true, then styles are merged with the default styles, with the  user defined styles having priority</div>
-					</dd>
-			<dt class="field">
-						<img src="media/images/Method.png" alt="Method" title="Method" /></title>
-			<span class="method-title">set_case_keywords</span>
-					</dt>
-		<dd class="index-item-body">
-			<div class="index-item-details"><a href="geshi/core/GeSHi.html#methodset_case_keywords">GeSHi::set_case_keywords()</a> in geshi.php</div>
-							<div class="index-item-description">Sets the case that keywords should use when found. Use the constants:</div>
-					</dd>
-			<dt class="field">
-						<img src="media/images/Method.png" alt="Method" title="Method" /></title>
-			<span class="method-title">set_case_sensitivity</span>
-					</dt>
-		<dd class="index-item-body">
-			<div class="index-item-details"><a href="geshi/core/GeSHi.html#methodset_case_sensitivity">GeSHi::set_case_sensitivity()</a> in geshi.php</div>
-							<div class="index-item-description">Sets whether a set of keywords are checked for in a case sensitive manner</div>
-					</dd>
-			<dt class="field">
-						<img src="media/images/Method.png" alt="Method" title="Method" /></title>
-			<span class="method-title">set_code_style</span>
-					</dt>
-		<dd class="index-item-body">
-			<div class="index-item-details"><a href="geshi/core/GeSHi.html#methodset_code_style">GeSHi::set_code_style()</a> in geshi.php</div>
-							<div class="index-item-description">Sets the style for the actual code. This should be a string</div>
-					</dd>
-			<dt class="field">
-						<img src="media/images/Method.png" alt="Method" title="Method" /></title>
-			<span class="method-title">set_comments_highlighting</span>
-					</dt>
-		<dd class="index-item-body">
-			<div class="index-item-details"><a href="geshi/core/GeSHi.html#methodset_comments_highlighting">GeSHi::set_comments_highlighting()</a> in geshi.php</div>
-							<div class="index-item-description">Turns highlighting on/off for comment groups</div>
-					</dd>
-			<dt class="field">
-						<img src="media/images/Method.png" alt="Method" title="Method" /></title>
-			<span class="method-title">set_comments_style</span>
-					</dt>
-		<dd class="index-item-body">
-			<div class="index-item-details"><a href="geshi/core/GeSHi.html#methodset_comments_style">GeSHi::set_comments_style()</a> in geshi.php</div>
-							<div class="index-item-description">Sets the styles for comment groups.  If $preserve_defaults is  true, then styles are merged with the default styles, with the  user defined styles having priority</div>
-					</dd>
-			<dt class="field">
-						<img src="media/images/Method.png" alt="Method" title="Method" /></title>
-			<span class="method-title">set_encoding</span>
-					</dt>
-		<dd class="index-item-body">
-			<div class="index-item-details"><a href="geshi/core/GeSHi.html#methodset_encoding">GeSHi::set_encoding()</a> in geshi.php</div>
-							<div class="index-item-description">Sets the encoding used for htmlspecialchars(), for international  support.</div>
-					</dd>
-			<dt class="field">
-						<img src="media/images/Method.png" alt="Method" title="Method" /></title>
-			<span class="method-title">set_escape_characters_highlighting</span>
-					</dt>
-		<dd class="index-item-body">
-			<div class="index-item-details"><a href="geshi/core/GeSHi.html#methodset_escape_characters_highlighting">GeSHi::set_escape_characters_highlighting()</a> in geshi.php</div>
-							<div class="index-item-description">Turns highlighting on/off for escaped characters</div>
-					</dd>
-			<dt class="field">
-						<img src="media/images/Method.png" alt="Method" title="Method" /></title>
-			<span class="method-title">set_escape_characters_style</span>
-					</dt>
-		<dd class="index-item-body">
-			<div class="index-item-details"><a href="geshi/core/GeSHi.html#methodset_escape_characters_style">GeSHi::set_escape_characters_style()</a> in geshi.php</div>
-							<div class="index-item-description">Sets the styles for escaped characters. If $preserve_defaults is  true, then styles are merged with the default styles, with the  user defined styles having priority</div>
-					</dd>
-			<dt class="field">
-						<img src="media/images/Method.png" alt="Method" title="Method" /></title>
-			<span class="method-title">set_footer_content</span>
-					</dt>
-		<dd class="index-item-body">
-			<div class="index-item-details"><a href="geshi/core/GeSHi.html#methodset_footer_content">GeSHi::set_footer_content()</a> in geshi.php</div>
-							<div class="index-item-description">Sets the content of the footer block</div>
-					</dd>
-			<dt class="field">
-						<img src="media/images/Method.png" alt="Method" title="Method" /></title>
-			<span class="method-title">set_footer_content_style</span>
-					</dt>
-		<dd class="index-item-body">
-			<div class="index-item-details"><a href="geshi/core/GeSHi.html#methodset_footer_content_style">GeSHi::set_footer_content_style()</a> in geshi.php</div>
-							<div class="index-item-description">Sets the style for the footer content</div>
-					</dd>
-			<dt class="field">
-						<img src="media/images/Method.png" alt="Method" title="Method" /></title>
-			<span class="method-title">set_header_content</span>
-					</dt>
-		<dd class="index-item-body">
-			<div class="index-item-details"><a href="geshi/core/GeSHi.html#methodset_header_content">GeSHi::set_header_content()</a> in geshi.php</div>
-							<div class="index-item-description">Sets the content of the header block</div>
-					</dd>
-			<dt class="field">
-						<img src="media/images/Method.png" alt="Method" title="Method" /></title>
-			<span class="method-title">set_header_content_style</span>
-					</dt>
-		<dd class="index-item-body">
-			<div class="index-item-details"><a href="geshi/core/GeSHi.html#methodset_header_content_style">GeSHi::set_header_content_style()</a> in geshi.php</div>
-							<div class="index-item-description">Sets the style for the header content</div>
-					</dd>
-			<dt class="field">
-						<img src="media/images/Method.png" alt="Method" title="Method" /></title>
-			<span class="method-title">set_header_type</span>
-					</dt>
-		<dd class="index-item-body">
-			<div class="index-item-details"><a href="geshi/core/GeSHi.html#methodset_header_type">GeSHi::set_header_type()</a> in geshi.php</div>
-							<div class="index-item-description">Sets the type of header to be used.</div>
-					</dd>
-			<dt class="field">
-						<img src="media/images/Method.png" alt="Method" title="Method" /></title>
-			<span class="method-title">set_highlight_lines_extra_style</span>
-					</dt>
-		<dd class="index-item-body">
-			<div class="index-item-details"><a href="geshi/core/GeSHi.html#methodset_highlight_lines_extra_style">GeSHi::set_highlight_lines_extra_style()</a> in geshi.php</div>
-							<div class="index-item-description">Sets the style for extra-highlighted lines</div>
-					</dd>
-			<dt class="field">
-						<img src="media/images/Method.png" alt="Method" title="Method" /></title>
-			<span class="method-title">set_important_styles</span>
-					</dt>
-		<dd class="index-item-body">
-			<div class="index-item-details"><a href="geshi/core/GeSHi.html#methodset_important_styles">GeSHi::set_important_styles()</a> in geshi.php</div>
-							<div class="index-item-description">Sets styles for important parts of the code</div>
-					</dd>
-			<dt class="field">
-						<img src="media/images/Method.png" alt="Method" title="Method" /></title>
-			<span class="method-title">set_keyword_group_highlighting</span>
-					</dt>
-		<dd class="index-item-body">
-			<div class="index-item-details"><a href="geshi/core/GeSHi.html#methodset_keyword_group_highlighting">GeSHi::set_keyword_group_highlighting()</a> in geshi.php</div>
-							<div class="index-item-description">Turns highlighting on/off for a keyword group</div>
-					</dd>
-			<dt class="field">
-						<img src="media/images/Method.png" alt="Method" title="Method" /></title>
-			<span class="method-title">set_keyword_group_style</span>
-					</dt>
-		<dd class="index-item-body">
-			<div class="index-item-details"><a href="geshi/core/GeSHi.html#methodset_keyword_group_style">GeSHi::set_keyword_group_style()</a> in geshi.php</div>
-							<div class="index-item-description">Sets the style for a keyword group. If $preserve_defaults is  true, then styles are merged with the default styles, with the  user defined styles having priority</div>
-					</dd>
-			<dt class="field">
-						<img src="media/images/Method.png" alt="Method" title="Method" /></title>
-			<span class="method-title">set_language</span>
-					</dt>
-		<dd class="index-item-body">
-			<div class="index-item-details"><a href="geshi/core/GeSHi.html#methodset_language">GeSHi::set_language()</a> in geshi.php</div>
-							<div class="index-item-description">Sets the language for this object</div>
-					</dd>
-			<dt class="field">
-						<img src="media/images/Method.png" alt="Method" title="Method" /></title>
-			<span class="method-title">set_language_path</span>
-					</dt>
-		<dd class="index-item-body">
-			<div class="index-item-details"><a href="geshi/core/GeSHi.html#methodset_language_path">GeSHi::set_language_path()</a> in geshi.php</div>
-							<div class="index-item-description">Sets the path to the directory containing the language files. Note  that this path is relative to the directory of the script that included  geshi.php, NOT geshi.php itself.</div>
-					</dd>
-			<dt class="field">
-						<img src="media/images/Method.png" alt="Method" title="Method" /></title>
-			<span class="method-title">set_line_ending</span>
-					</dt>
-		<dd class="index-item-body">
-			<div class="index-item-details"><a href="geshi/core/GeSHi.html#methodset_line_ending">GeSHi::set_line_ending()</a> in geshi.php</div>
-							<div class="index-item-description">Sets the line-ending</div>
-					</dd>
-			<dt class="field">
-						<img src="media/images/Method.png" alt="Method" title="Method" /></title>
-			<span class="method-title">set_line_style</span>
-					</dt>
-		<dd class="index-item-body">
-			<div class="index-item-details"><a href="geshi/core/GeSHi.html#methodset_line_style">GeSHi::set_line_style()</a> in geshi.php</div>
-							<div class="index-item-description">Sets the styles for the line numbers.</div>
-					</dd>
-			<dt class="field">
-						<img src="media/images/Method.png" alt="Method" title="Method" /></title>
-			<span class="method-title">set_link_styles</span>
-					</dt>
-		<dd class="index-item-body">
-			<div class="index-item-details"><a href="geshi/core/GeSHi.html#methodset_link_styles">GeSHi::set_link_styles()</a> in geshi.php</div>
-							<div class="index-item-description">Sets styles for links in code</div>
-					</dd>
-			<dt class="field">
-						<img src="media/images/Method.png" alt="Method" title="Method" /></title>
-			<span class="method-title">set_link_target</span>
-					</dt>
-		<dd class="index-item-body">
-			<div class="index-item-details"><a href="geshi/core/GeSHi.html#methodset_link_target">GeSHi::set_link_target()</a> in geshi.php</div>
-							<div class="index-item-description">Sets the target for links in code</div>
-					</dd>
-			<dt class="field">
-						<img src="media/images/Method.png" alt="Method" title="Method" /></title>
-			<span class="method-title">set_methods_highlighting</span>
-					</dt>
-		<dd class="index-item-body">
-			<div class="index-item-details"><a href="geshi/core/GeSHi.html#methodset_methods_highlighting">GeSHi::set_methods_highlighting()</a> in geshi.php</div>
-							<div class="index-item-description">Turns highlighting on/off for methods</div>
-					</dd>
-			<dt class="field">
-						<img src="media/images/Method.png" alt="Method" title="Method" /></title>
-			<span class="method-title">set_methods_style</span>
-					</dt>
-		<dd class="index-item-body">
-			<div class="index-item-details"><a href="geshi/core/GeSHi.html#methodset_methods_style">GeSHi::set_methods_style()</a> in geshi.php</div>
-							<div class="index-item-description">Sets the styles for methods. $key is a number that references the</div>
-					</dd>
-			<dt class="field">
-						<img src="media/images/Method.png" alt="Method" title="Method" /></title>
-			<span class="method-title">set_numbers_highlighting</span>
-					</dt>
-		<dd class="index-item-body">
-			<div class="index-item-details"><a href="geshi/core/GeSHi.html#methodset_numbers_highlighting">GeSHi::set_numbers_highlighting()</a> in geshi.php</div>
-							<div class="index-item-description">Turns highlighting on/off for numbers</div>
-					</dd>
-			<dt class="field">
-						<img src="media/images/Method.png" alt="Method" title="Method" /></title>
-			<span class="method-title">set_numbers_style</span>
-					</dt>
-		<dd class="index-item-body">
-			<div class="index-item-details"><a href="geshi/core/GeSHi.html#methodset_numbers_style">GeSHi::set_numbers_style()</a> in geshi.php</div>
-							<div class="index-item-description">Sets the styles for numbers. If $preserve_defaults is  true, then styles are merged with the default styles, with the  user defined styles having priority</div>
-					</dd>
-			<dt class="field">
-						<img src="media/images/Method.png" alt="Method" title="Method" /></title>
-			<span class="method-title">set_overall_class</span>
-					</dt>
-		<dd class="index-item-body">
-			<div class="index-item-details"><a href="geshi/core/GeSHi.html#methodset_overall_class">GeSHi::set_overall_class()</a> in geshi.php</div>
-							<div class="index-item-description">Sets the overall classname for this block of code. This  class can then be used in a stylesheet to style this object's  output</div>
-					</dd>
-			<dt class="field">
-						<img src="media/images/Method.png" alt="Method" title="Method" /></title>
-			<span class="method-title">set_overall_id</span>
-					</dt>
-		<dd class="index-item-body">
-			<div class="index-item-details"><a href="geshi/core/GeSHi.html#methodset_overall_id">GeSHi::set_overall_id()</a> in geshi.php</div>
-							<div class="index-item-description">Sets the overall id for this block of code. This id can then  be used in a stylesheet to style this object's output</div>
-					</dd>
-			<dt class="field">
-						<img src="media/images/Method.png" alt="Method" title="Method" /></title>
-			<span class="method-title">set_overall_style</span>
-					</dt>
-		<dd class="index-item-body">
-			<div class="index-item-details"><a href="geshi/core/GeSHi.html#methodset_overall_style">GeSHi::set_overall_style()</a> in geshi.php</div>
-							<div class="index-item-description">Sets the styles for the code that will be outputted  when this object is parsed. The style should be a  string of valid stylesheet declarations</div>
-					</dd>
-			<dt class="field">
-						<img src="media/images/Method.png" alt="Method" title="Method" /></title>
-			<span class="method-title">set_regexps_highlighting</span>
-					</dt>
-		<dd class="index-item-body">
-			<div class="index-item-details"><a href="geshi/core/GeSHi.html#methodset_regexps_highlighting">GeSHi::set_regexps_highlighting()</a> in geshi.php</div>
-							<div class="index-item-description">Turns highlighting on/off for regexps</div>
-					</dd>
-			<dt class="field">
-						<img src="media/images/Method.png" alt="Method" title="Method" /></title>
-			<span class="method-title">set_regexps_style</span>
-					</dt>
-		<dd class="index-item-body">
-			<div class="index-item-details"><a href="geshi/core/GeSHi.html#methodset_regexps_style">GeSHi::set_regexps_style()</a> in geshi.php</div>
-							<div class="index-item-description">Sets the styles for regexps. If $preserve_defaults is  true, then styles are merged with the default styles, with the  user defined styles having priority</div>
-					</dd>
-			<dt class="field">
-						<img src="media/images/Method.png" alt="Method" title="Method" /></title>
-			<span class="method-title">set_source</span>
-					</dt>
-		<dd class="index-item-body">
-			<div class="index-item-details"><a href="geshi/core/GeSHi.html#methodset_source">GeSHi::set_source()</a> in geshi.php</div>
-							<div class="index-item-description">Sets the source code for this object</div>
-					</dd>
-			<dt class="field">
-						<img src="media/images/Method.png" alt="Method" title="Method" /></title>
-			<span class="method-title">set_strings_highlighting</span>
-					</dt>
-		<dd class="index-item-body">
-			<div class="index-item-details"><a href="geshi/core/GeSHi.html#methodset_strings_highlighting">GeSHi::set_strings_highlighting()</a> in geshi.php</div>
-							<div class="index-item-description">Turns highlighting on/off for strings</div>
-					</dd>
-			<dt class="field">
-						<img src="media/images/Method.png" alt="Method" title="Method" /></title>
-			<span class="method-title">set_strings_style</span>
-					</dt>
-		<dd class="index-item-body">
-			<div class="index-item-details"><a href="geshi/core/GeSHi.html#methodset_strings_style">GeSHi::set_strings_style()</a> in geshi.php</div>
-							<div class="index-item-description">Sets the styles for strings. If $preserve_defaults is  true, then styles are merged with the default styles, with the  user defined styles having priority</div>
-					</dd>
-			<dt class="field">
-						<img src="media/images/Method.png" alt="Method" title="Method" /></title>
-			<span class="method-title">set_symbols_highlighting</span>
-					</dt>
-		<dd class="index-item-body">
-			<div class="index-item-details"><a href="geshi/core/GeSHi.html#methodset_symbols_highlighting">GeSHi::set_symbols_highlighting()</a> in geshi.php</div>
-							<div class="index-item-description">Turns highlighting on/off for symbols</div>
-					</dd>
-			<dt class="field">
-						<img src="media/images/Method.png" alt="Method" title="Method" /></title>
-			<span class="method-title">set_symbols_style</span>
-					</dt>
-		<dd class="index-item-body">
-			<div class="index-item-details"><a href="geshi/core/GeSHi.html#methodset_symbols_style">GeSHi::set_symbols_style()</a> in geshi.php</div>
-							<div class="index-item-description">Sets the styles for symbols. If $preserve_defaults is  true, then styles are merged with the default styles, with the  user defined styles having priority</div>
-					</dd>
-			<dt class="field">
-						<img src="media/images/Method.png" alt="Method" title="Method" /></title>
-			<span class="method-title">set_tab_width</span>
-					</dt>
-		<dd class="index-item-body">
-			<div class="index-item-details"><a href="geshi/core/GeSHi.html#methodset_tab_width">GeSHi::set_tab_width()</a> in geshi.php</div>
-							<div class="index-item-description">Sets how many spaces a tab is substituted for</div>
-					</dd>
-			<dt class="field">
-						<img src="media/images/Method.png" alt="Method" title="Method" /></title>
-			<span class="method-title">set_url_for_keyword_group</span>
-					</dt>
-		<dd class="index-item-body">
-			<div class="index-item-details"><a href="geshi/core/GeSHi.html#methodset_url_for_keyword_group">GeSHi::set_url_for_keyword_group()</a> in geshi.php</div>
-							<div class="index-item-description">Sets the base URL to be used for keywords</div>
-					</dd>
-			<dt class="field">
-						<img src="media/images/Method.png" alt="Method" title="Method" /></title>
-			<span class="method-title">set_use_language_tab_width</span>
-					</dt>
-		<dd class="index-item-body">
-			<div class="index-item-details"><a href="geshi/core/GeSHi.html#methodset_use_language_tab_width">GeSHi::set_use_language_tab_width()</a> in geshi.php</div>
-							<div class="index-item-description">Sets whether or not to use tab-stop width specifed by language</div>
-					</dd>
-			<dt class="field">
-						<img src="media/images/Method.png" alt="Method" title="Method" /></title>
-			<span class="method-title">start_line_numbers_at</span>
-					</dt>
-		<dd class="index-item-body">
-			<div class="index-item-details"><a href="geshi/core/GeSHi.html#methodstart_line_numbers_at">GeSHi::start_line_numbers_at()</a> in geshi.php</div>
-							<div class="index-item-description">Sets what number line numbers should start at. Should  be a positive integer, and will be converted to one.</div>
-					</dd>
-		</dl>
-
-<div class="index-letter-menu">
-	<a class="index-letter" href="elementindex.html#a">a</a>
-	<a class="index-letter" href="elementindex.html#d">d</a>
-	<a class="index-letter" href="elementindex.html#e">e</a>
-	<a class="index-letter" href="elementindex.html#g">g</a>
-	<a class="index-letter" href="elementindex.html#h">h</a>
-	<a class="index-letter" href="elementindex.html#l">l</a>
-	<a class="index-letter" href="elementindex.html#o">o</a>
-	<a class="index-letter" href="elementindex.html#p">p</a>
-	<a class="index-letter" href="elementindex.html#r">r</a>
-	<a class="index-letter" href="elementindex.html#s">s</a>
-</div>	</body>
-</html>

examples/includes/geshi/docs/api/elementindex_geshi.html

@@ -1,864 +0,0 @@
-<?xml version="1.0" encoding="iso-8859-1"?>
-<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
-  <html xmlns="http://www.w3.org/1999/xhtml">
-		<head>
-			<!-- template designed by Marco Von Ballmoos -->
-			<title></title>
-			<link rel="stylesheet" href="media/stylesheet.css" />
-			<meta http-equiv='Content-Type' content='text/html; charset=iso-8859-1'/>
-		</head>
-		<body>
-						<a name="top"></a>
-<h2>[geshi] element index</h2>
-<a href="elementindex.html">All elements</a>
-<br />
-<div class="index-letter-menu">
-	<a class="index-letter" href="elementindex_geshi.html#a">a</a>
-	<a class="index-letter" href="elementindex_geshi.html#d">d</a>
-	<a class="index-letter" href="elementindex_geshi.html#e">e</a>
-	<a class="index-letter" href="elementindex_geshi.html#g">g</a>
-	<a class="index-letter" href="elementindex_geshi.html#h">h</a>
-	<a class="index-letter" href="elementindex_geshi.html#l">l</a>
-	<a class="index-letter" href="elementindex_geshi.html#o">o</a>
-	<a class="index-letter" href="elementindex_geshi.html#p">p</a>
-	<a class="index-letter" href="elementindex_geshi.html#r">r</a>
-	<a class="index-letter" href="elementindex_geshi.html#s">s</a>
-</div>
-
-	<a name="a"></a>
-	<div class="index-letter-section">
-		<div style="float: left" class="index-letter-title">a</div>
-		<div style="float: right"><a href="#top">top</a></div>
-		<div style="clear: both"></div>
-	</div>
-	<dl>
-			<dt class="field">
-						<img src="media/images/Method.png" alt="Method" title="Method" /></title>
-			<span class="method-title">add_keyword</span>
-					</dt>
-		<dd class="index-item-body">
-			<div class="index-item-details"><a href="geshi/core/GeSHi.html#methodadd_keyword">GeSHi::add_keyword()</a> in geshi.php</div>
-							<div class="index-item-description">Adds a keyword to a keyword group for highlighting</div>
-					</dd>
-			<dt class="field">
-						<img src="media/images/Method.png" alt="Method" title="Method" /></title>
-			<span class="method-title">add_keyword_group</span>
-					</dt>
-		<dd class="index-item-body">
-			<div class="index-item-details"><a href="geshi/core/GeSHi.html#methodadd_keyword_group">GeSHi::add_keyword_group()</a> in geshi.php</div>
-							<div class="index-item-description">Creates a new keyword group</div>
-					</dd>
-		</dl>
-	<a name="d"></a>
-	<div class="index-letter-section">
-		<div style="float: left" class="index-letter-title">d</div>
-		<div style="float: right"><a href="#top">top</a></div>
-		<div style="clear: both"></div>
-	</div>
-	<dl>
-			<dt class="field">
-						<img src="media/images/Method.png" alt="Method" title="Method" /></title>
-			<span class="method-title">disable_highlighting</span>
-					</dt>
-		<dd class="index-item-body">
-			<div class="index-item-details"><a href="geshi/core/GeSHi.html#methoddisable_highlighting">GeSHi::disable_highlighting()</a> in geshi.php</div>
-							<div class="index-item-description">Disables all highlighting</div>
-					</dd>
-		</dl>
-	<a name="e"></a>
-	<div class="index-letter-section">
-		<div style="float: left" class="index-letter-title">e</div>
-		<div style="float: right"><a href="#top">top</a></div>
-		<div style="clear: both"></div>
-	</div>
-	<dl>
-			<dt class="field">
-						<img src="media/images/Method.png" alt="Method" title="Method" /></title>
-			<span class="method-title">enable_classes</span>
-					</dt>
-		<dd class="index-item-body">
-			<div class="index-item-details"><a href="geshi/core/GeSHi.html#methodenable_classes">GeSHi::enable_classes()</a> in geshi.php</div>
-							<div class="index-item-description">Sets whether CSS classes should be used to highlight the source. Default  is off, calling this method with no arguments will turn it on</div>
-					</dd>
-			<dt class="field">
-						<img src="media/images/Method.png" alt="Method" title="Method" /></title>
-			<span class="method-title">enable_highlighting</span>
-					</dt>
-		<dd class="index-item-body">
-			<div class="index-item-details"><a href="geshi/core/GeSHi.html#methodenable_highlighting">GeSHi::enable_highlighting()</a> in geshi.php</div>
-							<div class="index-item-description">Enables all highlighting</div>
-					</dd>
-			<dt class="field">
-						<img src="media/images/Method.png" alt="Method" title="Method" /></title>
-			<span class="method-title">enable_ids</span>
-					</dt>
-		<dd class="index-item-body">
-			<div class="index-item-details"><a href="geshi/core/GeSHi.html#methodenable_ids">GeSHi::enable_ids()</a> in geshi.php</div>
-							<div class="index-item-description">Whether CSS IDs should be added to each line</div>
-					</dd>
-			<dt class="field">
-						<img src="media/images/Method.png" alt="Method" title="Method" /></title>
-			<span class="method-title">enable_important_blocks</span>
-					</dt>
-		<dd class="index-item-body">
-			<div class="index-item-details"><a href="geshi/core/GeSHi.html#methodenable_important_blocks">GeSHi::enable_important_blocks()</a> in geshi.php</div>
-							<div class="index-item-description">Sets whether context-important blocks are highlighted</div>
-					</dd>
-			<dt class="field">
-						<img src="media/images/Method.png" alt="Method" title="Method" /></title>
-			<span class="method-title">enable_inner_code_block</span>
-					</dt>
-		<dd class="index-item-body">
-			<div class="index-item-details"><a href="geshi/core/GeSHi.html#methodenable_inner_code_block">GeSHi::enable_inner_code_block()</a> in geshi.php</div>
-							<div class="index-item-description">Sets whether to force a surrounding block around  the highlighted code or not</div>
-					</dd>
-			<dt class="field">
-						<img src="media/images/Method.png" alt="Method" title="Method" /></title>
-			<span class="method-title">enable_keyword_links</span>
-					</dt>
-		<dd class="index-item-body">
-			<div class="index-item-details"><a href="geshi/core/GeSHi.html#methodenable_keyword_links">GeSHi::enable_keyword_links()</a> in geshi.php</div>
-							<div class="index-item-description">Turns linking of keywords on or off.</div>
-					</dd>
-			<dt class="field">
-						<img src="media/images/Method.png" alt="Method" title="Method" /></title>
-			<span class="method-title">enable_line_numbers</span>
-					</dt>
-		<dd class="index-item-body">
-			<div class="index-item-details"><a href="geshi/core/GeSHi.html#methodenable_line_numbers">GeSHi::enable_line_numbers()</a> in geshi.php</div>
-							<div class="index-item-description">Sets whether line numbers should be displayed.</div>
-					</dd>
-			<dt class="field">
-						<img src="media/images/Method.png" alt="Method" title="Method" /></title>
-			<span class="method-title">enable_multiline_span</span>
-					</dt>
-		<dd class="index-item-body">
-			<div class="index-item-details"><a href="geshi/core/GeSHi.html#methodenable_multiline_span">GeSHi::enable_multiline_span()</a> in geshi.php</div>
-							<div class="index-item-description">Sets wether spans and other HTML markup generated by GeSHi can  span over multiple lines or not. Defaults to true to reduce overhead.</div>
-					</dd>
-			<dt class="field">
-						<img src="media/images/Method.png" alt="Method" title="Method" /></title>
-			<span class="method-title">enable_strict_mode</span>
-					</dt>
-		<dd class="index-item-body">
-			<div class="index-item-details"><a href="geshi/core/GeSHi.html#methodenable_strict_mode">GeSHi::enable_strict_mode()</a> in geshi.php</div>
-							<div class="index-item-description">Enables/disables strict highlighting. Default is off, calling this  method without parameters will turn it on. See documentation  for more details on strict mode and where to use it.</div>
-					</dd>
-			<dt class="field">
-						<img src="media/images/Method.png" alt="Method" title="Method" /></title>
-			<span class="method-title">error</span>
-					</dt>
-		<dd class="index-item-body">
-			<div class="index-item-details"><a href="geshi/core/GeSHi.html#methoderror">GeSHi::error()</a> in geshi.php</div>
-							<div class="index-item-description">Returns an error message associated with the last GeSHi operation,  or false if no error has occured</div>
-					</dd>
-		</dl>
-	<a name="g"></a>
-	<div class="index-letter-section">
-		<div style="float: left" class="index-letter-title">g</div>
-		<div style="float: right"><a href="#top">top</a></div>
-		<div style="clear: both"></div>
-	</div>
-	<dl>
-			<dt class="field">
-						<img src="media/images/Constructor.png" alt="Method" title="Method" /></title>
-			<span class="method-title">GeSHi</span>
-					</dt>
-		<dd class="index-item-body">
-			<div class="index-item-details"><a href="geshi/core/GeSHi.html#methodGeSHi">GeSHi::GeSHi()</a> in geshi.php</div>
-							<div class="index-item-description">Creates a new GeSHi object, with source and language</div>
-					</dd>
-			<dt class="field">
-						<img src="media/images/Class.png" alt="Class" title="Class" /></title>
-			GeSHi
-					</dt>
-		<dd class="index-item-body">
-			<div class="index-item-details"><a href="geshi/core/GeSHi.html">GeSHi</a> in geshi.php</div>
-							<div class="index-item-description">The GeSHi Class.</div>
-					</dd>
-			<dt class="field">
-						<img src="media/images/Page.png" alt="Page" title="Page" /></title>
-			<span class="include-title">geshi.php</span>
-					</dt>
-		<dd class="index-item-body">
-			<div class="index-item-details"><a href="geshi/core/_geshi.php.html">geshi.php</a> in geshi.php</div>
-					</dd>
-			<dt class="field">
-						<img src="media/images/Constant.png" alt="Constant" title="Constant" /></title>
-			<span class="const-title">GESHI_ACTIVE</span>
-					</dt>
-		<dd class="index-item-body">
-			<div class="index-item-details"><a href="geshi/core/_geshi.php.html#defineGESHI_ACTIVE">GESHI_ACTIVE</a> in geshi.php</div>
-							<div class="index-item-description">Links in the source in the :active state</div>
-					</dd>
-			<dt class="field">
-						<img src="media/images/Constant.png" alt="Constant" title="Constant" /></title>
-			<span class="const-title">GESHI_CAPS_LOWER</span>
-					</dt>
-		<dd class="index-item-body">
-			<div class="index-item-details"><a href="geshi/core/_geshi.php.html#defineGESHI_CAPS_LOWER">GESHI_CAPS_LOWER</a> in geshi.php</div>
-							<div class="index-item-description">Leave keywords found as the case that they are</div>
-					</dd>
-			<dt class="field">
-						<img src="media/images/Constant.png" alt="Constant" title="Constant" /></title>
-			<span class="const-title">GESHI_CAPS_NO_CHANGE</span>
-					</dt>
-		<dd class="index-item-body">
-			<div class="index-item-details"><a href="geshi/core/_geshi.php.html#defineGESHI_CAPS_NO_CHANGE">GESHI_CAPS_NO_CHANGE</a> in geshi.php</div>
-							<div class="index-item-description">Lowercase keywords found</div>
-					</dd>
-			<dt class="field">
-						<img src="media/images/Constant.png" alt="Constant" title="Constant" /></title>
-			<span class="const-title">GESHI_CAPS_UPPER</span>
-					</dt>
-		<dd class="index-item-body">
-			<div class="index-item-details"><a href="geshi/core/_geshi.php.html#defineGESHI_CAPS_UPPER">GESHI_CAPS_UPPER</a> in geshi.php</div>
-							<div class="index-item-description">Uppercase keywords found</div>
-					</dd>
-			<dt class="field">
-						<img src="media/images/Constant.png" alt="Constant" title="Constant" /></title>
-			<span class="const-title">GESHI_END_IMPORTANT</span>
-					</dt>
-		<dd class="index-item-body">
-			<div class="index-item-details"><a href="geshi/core/_geshi.php.html#defineGESHI_END_IMPORTANT">GESHI_END_IMPORTANT</a> in geshi.php</div>
-							<div class="index-item-description">The ender for important parts of the source</div>
-					</dd>
-			<dt class="field">
-						<img src="media/images/Constant.png" alt="Constant" title="Constant" /></title>
-			<span class="const-title">GESHI_FANCY_LINE_NUMBERS</span>
-					</dt>
-		<dd class="index-item-body">
-			<div class="index-item-details"><a href="geshi/core/_geshi.php.html#defineGESHI_FANCY_LINE_NUMBERS">GESHI_FANCY_LINE_NUMBERS</a> in geshi.php</div>
-							<div class="index-item-description">Use fancy line numbers when building the result</div>
-					</dd>
-			<dt class="field">
-						<img src="media/images/Constant.png" alt="Constant" title="Constant" /></title>
-			<span class="const-title">GESHI_HEADER_DIV</span>
-					</dt>
-		<dd class="index-item-body">
-			<div class="index-item-details"><a href="geshi/core/_geshi.php.html#defineGESHI_HEADER_DIV">GESHI_HEADER_DIV</a> in geshi.php</div>
-							<div class="index-item-description">Use a &quot;div&quot; to surround the source</div>
-					</dd>
-			<dt class="field">
-						<img src="media/images/Constant.png" alt="Constant" title="Constant" /></title>
-			<span class="const-title">GESHI_HEADER_NONE</span>
-					</dt>
-		<dd class="index-item-body">
-			<div class="index-item-details"><a href="geshi/core/_geshi.php.html#defineGESHI_HEADER_NONE">GESHI_HEADER_NONE</a> in geshi.php</div>
-							<div class="index-item-description">Use nothing to surround the source</div>
-					</dd>
-			<dt class="field">
-						<img src="media/images/Constant.png" alt="Constant" title="Constant" /></title>
-			<span class="const-title">GESHI_HEADER_PRE</span>
-					</dt>
-		<dd class="index-item-body">
-			<div class="index-item-details"><a href="geshi/core/_geshi.php.html#defineGESHI_HEADER_PRE">GESHI_HEADER_PRE</a> in geshi.php</div>
-							<div class="index-item-description">Use a &quot;pre&quot; to surround the source</div>
-					</dd>
-			<dt class="field">
-						<img src="media/images/Constant.png" alt="Constant" title="Constant" /></title>
-			<span class="const-title">GESHI_HEADER_PRE_TABLE</span>
-					</dt>
-		<dd class="index-item-body">
-			<div class="index-item-details"><a href="geshi/core/_geshi.php.html#defineGESHI_HEADER_PRE_TABLE">GESHI_HEADER_PRE_TABLE</a> in geshi.php</div>
-							<div class="index-item-description">Use a &quot;table&quot; to surround the source:</div>
-					</dd>
-			<dt class="field">
-						<img src="media/images/Constant.png" alt="Constant" title="Constant" /></title>
-			<span class="const-title">GESHI_HEADER_PRE_VALID</span>
-					</dt>
-		<dd class="index-item-body">
-			<div class="index-item-details"><a href="geshi/core/_geshi.php.html#defineGESHI_HEADER_PRE_VALID">GESHI_HEADER_PRE_VALID</a> in geshi.php</div>
-							<div class="index-item-description">Use a pre to wrap lines when line numbers are enabled or to wrap the whole code.</div>
-					</dd>
-			<dt class="field">
-						<img src="media/images/Function.png" alt="Function" title="Function" /></title>
-			<span class="method-title">geshi_highlight</span>
-					</dt>
-		<dd class="index-item-body">
-			<div class="index-item-details"><a href="geshi/core/_geshi.php.html#functiongeshi_highlight">geshi_highlight()</a> in geshi.php</div>
-							<div class="index-item-description">Easy way to highlight stuff. Behaves just like highlight_string</div>
-					</dd>
-			<dt class="field">
-						<img src="media/images/Constant.png" alt="Constant" title="Constant" /></title>
-			<span class="const-title">GESHI_HOVER</span>
-					</dt>
-		<dd class="index-item-body">
-			<div class="index-item-details"><a href="geshi/core/_geshi.php.html#defineGESHI_HOVER">GESHI_HOVER</a> in geshi.php</div>
-							<div class="index-item-description">Links in the source in the :hover state</div>
-					</dd>
-			<dt class="field">
-						<img src="media/images/Constant.png" alt="Constant" title="Constant" /></title>
-			<span class="const-title">GESHI_LANG_ROOT</span>
-					</dt>
-		<dd class="index-item-body">
-			<div class="index-item-details"><a href="geshi/core/_geshi.php.html#defineGESHI_LANG_ROOT">GESHI_LANG_ROOT</a> in geshi.php</div>
-							<div class="index-item-description">The language file directory for GeSHi</div>
-					</dd>
-			<dt class="field">
-						<img src="media/images/Constant.png" alt="Constant" title="Constant" /></title>
-			<span class="const-title">GESHI_LINK</span>
-					</dt>
-		<dd class="index-item-body">
-			<div class="index-item-details"><a href="geshi/core/_geshi.php.html#defineGESHI_LINK">GESHI_LINK</a> in geshi.php</div>
-							<div class="index-item-description">Links in the source in the :link state</div>
-					</dd>
-			<dt class="field">
-						<img src="media/images/Constant.png" alt="Constant" title="Constant" /></title>
-			<span class="const-title">GESHI_NORMAL_LINE_NUMBERS</span>
-					</dt>
-		<dd class="index-item-body">
-			<div class="index-item-details"><a href="geshi/core/_geshi.php.html#defineGESHI_NORMAL_LINE_NUMBERS">GESHI_NORMAL_LINE_NUMBERS</a> in geshi.php</div>
-							<div class="index-item-description">Use normal line numbers when building the result</div>
-					</dd>
-			<dt class="field">
-						<img src="media/images/Constant.png" alt="Constant" title="Constant" /></title>
-			<span class="const-title">GESHI_NO_LINE_NUMBERS</span>
-					</dt>
-		<dd class="index-item-body">
-			<div class="index-item-details"><a href="geshi/core/_geshi.php.html#defineGESHI_NO_LINE_NUMBERS">GESHI_NO_LINE_NUMBERS</a> in geshi.php</div>
-							<div class="index-item-description">Use no line numbers when building the result</div>
-					</dd>
-			<dt class="field">
-						<img src="media/images/Constant.png" alt="Constant" title="Constant" /></title>
-			<span class="const-title">GESHI_ROOT</span>
-					</dt>
-		<dd class="index-item-body">
-			<div class="index-item-details"><a href="geshi/core/_geshi.php.html#defineGESHI_ROOT">GESHI_ROOT</a> in geshi.php</div>
-							<div class="index-item-description">The root directory for GeSHi</div>
-					</dd>
-			<dt class="field">
-						<img src="media/images/Constant.png" alt="Constant" title="Constant" /></title>
-			<span class="const-title">GESHI_SECURITY_PARANOID</span>
-					</dt>
-		<dd class="index-item-body">
-			<div class="index-item-details"><a href="geshi/core/_geshi.php.html#defineGESHI_SECURITY_PARANOID">GESHI_SECURITY_PARANOID</a> in geshi.php</div>
-							<div class="index-item-description">Tells GeSHi to be paranoid about security settings</div>
-					</dd>
-			<dt class="field">
-						<img src="media/images/Constant.png" alt="Constant" title="Constant" /></title>
-			<span class="const-title">GESHI_START_IMPORTANT</span>
-					</dt>
-		<dd class="index-item-body">
-			<div class="index-item-details"><a href="geshi/core/_geshi.php.html#defineGESHI_START_IMPORTANT">GESHI_START_IMPORTANT</a> in geshi.php</div>
-							<div class="index-item-description">The starter for important parts of the source</div>
-					</dd>
-			<dt class="field">
-						<img src="media/images/Constant.png" alt="Constant" title="Constant" /></title>
-			<span class="const-title">GESHI_VERSION</span>
-					</dt>
-		<dd class="index-item-body">
-			<div class="index-item-details"><a href="geshi/core/_geshi.php.html#defineGESHI_VERSION">GESHI_VERSION</a> in geshi.php</div>
-							<div class="index-item-description">The version of this GeSHi file</div>
-					</dd>
-			<dt class="field">
-						<img src="media/images/Constant.png" alt="Constant" title="Constant" /></title>
-			<span class="const-title">GESHI_VISITED</span>
-					</dt>
-		<dd class="index-item-body">
-			<div class="index-item-details"><a href="geshi/core/_geshi.php.html#defineGESHI_VISITED">GESHI_VISITED</a> in geshi.php</div>
-							<div class="index-item-description">Links in the source in the :visited state</div>
-					</dd>
-			<dt class="field">
-						<img src="media/images/Method.png" alt="Method" title="Method" /></title>
-			<span class="method-title">get_language_name</span>
-					</dt>
-		<dd class="index-item-body">
-			<div class="index-item-details"><a href="geshi/core/GeSHi.html#methodget_language_name">GeSHi::get_language_name()</a> in geshi.php</div>
-							<div class="index-item-description">Gets a human-readable language name (thanks to Simon Patterson  for the idea :))</div>
-					</dd>
-			<dt class="field">
-						<img src="media/images/Method.png" alt="Method" title="Method" /></title>
-			<span class="method-title">get_language_name_from_extension</span>
-					</dt>
-		<dd class="index-item-body">
-			<div class="index-item-details"><a href="geshi/core/GeSHi.html#methodget_language_name_from_extension">GeSHi::get_language_name_from_extension()</a> in geshi.php</div>
-							<div class="index-item-description">Given a file extension, this method returns either a valid geshi language  name, or the empty string if it couldn't be found</div>
-					</dd>
-			<dt class="field">
-						<img src="media/images/Method.png" alt="Method" title="Method" /></title>
-			<span class="method-title">get_multiline_span</span>
-					</dt>
-		<dd class="index-item-body">
-			<div class="index-item-details"><a href="geshi/core/GeSHi.html#methodget_multiline_span">GeSHi::get_multiline_span()</a> in geshi.php</div>
-							<div class="index-item-description">Get current setting for multiline spans, see GeSHi-&gt;enable_multiline_span().</div>
-					</dd>
-			<dt class="field">
-						<img src="media/images/Method.png" alt="Method" title="Method" /></title>
-			<span class="method-title">get_real_tab_width</span>
-					</dt>
-		<dd class="index-item-body">
-			<div class="index-item-details"><a href="geshi/core/GeSHi.html#methodget_real_tab_width">GeSHi::get_real_tab_width()</a> in geshi.php</div>
-							<div class="index-item-description">Returns the tab width to use, based on the current language and user  preference</div>
-					</dd>
-			<dt class="field">
-						<img src="media/images/Method.png" alt="Method" title="Method" /></title>
-			<span class="method-title">get_stylesheet</span>
-					</dt>
-		<dd class="index-item-body">
-			<div class="index-item-details"><a href="geshi/core/GeSHi.html#methodget_stylesheet">GeSHi::get_stylesheet()</a> in geshi.php</div>
-							<div class="index-item-description">Returns a stylesheet for the highlighted code. If $economy mode  is true, we only return the stylesheet declarations that matter for  this code block instead of the whole thing</div>
-					</dd>
-			<dt class="field">
-						<img src="media/images/Method.png" alt="Method" title="Method" /></title>
-			<span class="method-title">get_time</span>
-					</dt>
-		<dd class="index-item-body">
-			<div class="index-item-details"><a href="geshi/core/GeSHi.html#methodget_time">GeSHi::get_time()</a> in geshi.php</div>
-							<div class="index-item-description">Gets the time taken to parse the code</div>
-					</dd>
-		</dl>
-	<a name="h"></a>
-	<div class="index-letter-section">
-		<div style="float: left" class="index-letter-title">h</div>
-		<div style="float: right"><a href="#top">top</a></div>
-		<div style="clear: both"></div>
-	</div>
-	<dl>
-			<dt class="field">
-						<img src="media/images/Method.png" alt="Method" title="Method" /></title>
-			<span class="method-title">highlight_lines_extra</span>
-					</dt>
-		<dd class="index-item-body">
-			<div class="index-item-details"><a href="geshi/core/GeSHi.html#methodhighlight_lines_extra">GeSHi::highlight_lines_extra()</a> in geshi.php</div>
-							<div class="index-item-description">Specifies which lines to highlight extra</div>
-					</dd>
-		</dl>
-	<a name="l"></a>
-	<div class="index-letter-section">
-		<div style="float: left" class="index-letter-title">l</div>
-		<div style="float: right"><a href="#top">top</a></div>
-		<div style="clear: both"></div>
-	</div>
-	<dl>
-			<dt class="field">
-						<img src="media/images/Method.png" alt="Method" title="Method" /></title>
-			<span class="method-title">load_from_file</span>
-					</dt>
-		<dd class="index-item-body">
-			<div class="index-item-details"><a href="geshi/core/GeSHi.html#methodload_from_file">GeSHi::load_from_file()</a> in geshi.php</div>
-							<div class="index-item-description">Given a file name, this method loads its contents in, and attempts</div>
-					</dd>
-		</dl>
-	<a name="o"></a>
-	<div class="index-letter-section">
-		<div style="float: left" class="index-letter-title">o</div>
-		<div style="float: right"><a href="#top">top</a></div>
-		<div style="clear: both"></div>
-	</div>
-	<dl>
-			<dt class="field">
-						<img src="media/images/Method.png" alt="Method" title="Method" /></title>
-			<span class="method-title">optimize_keyword_group</span>
-					</dt>
-		<dd class="index-item-body">
-			<div class="index-item-details"><a href="geshi/core/GeSHi.html#methodoptimize_keyword_group">GeSHi::optimize_keyword_group()</a> in geshi.php</div>
-							<div class="index-item-description">compile optimized regexp list for keyword group</div>
-					</dd>
-		</dl>
-	<a name="p"></a>
-	<div class="index-letter-section">
-		<div style="float: left" class="index-letter-title">p</div>
-		<div style="float: right"><a href="#top">top</a></div>
-		<div style="clear: both"></div>
-	</div>
-	<dl>
-			<dt class="field">
-						<img src="media/images/Method.png" alt="Method" title="Method" /></title>
-			<span class="method-title">parse_code</span>
-					</dt>
-		<dd class="index-item-body">
-			<div class="index-item-details"><a href="geshi/core/GeSHi.html#methodparse_code">GeSHi::parse_code()</a> in geshi.php</div>
-							<div class="index-item-description">Returns the code in $this-&gt;source, highlighted and surrounded by the  nessecary HTML.</div>
-					</dd>
-		</dl>
-	<a name="r"></a>
-	<div class="index-letter-section">
-		<div style="float: left" class="index-letter-title">r</div>
-		<div style="float: right"><a href="#top">top</a></div>
-		<div style="clear: both"></div>
-	</div>
-	<dl>
-			<dt class="field">
-						<img src="media/images/Method.png" alt="Method" title="Method" /></title>
-			<span class="method-title">remove_keyword</span>
-					</dt>
-		<dd class="index-item-body">
-			<div class="index-item-details"><a href="geshi/core/GeSHi.html#methodremove_keyword">GeSHi::remove_keyword()</a> in geshi.php</div>
-							<div class="index-item-description">Removes a keyword from a keyword group</div>
-					</dd>
-			<dt class="field">
-						<img src="media/images/Method.png" alt="Method" title="Method" /></title>
-			<span class="method-title">remove_keyword_group</span>
-					</dt>
-		<dd class="index-item-body">
-			<div class="index-item-details"><a href="geshi/core/GeSHi.html#methodremove_keyword_group">GeSHi::remove_keyword_group()</a> in geshi.php</div>
-							<div class="index-item-description">Removes a keyword group</div>
-					</dd>
-		</dl>
-	<a name="s"></a>
-	<div class="index-letter-section">
-		<div style="float: left" class="index-letter-title">s</div>
-		<div style="float: right"><a href="#top">top</a></div>
-		<div style="clear: both"></div>
-	</div>
-	<dl>
-			<dt class="field">
-						<img src="media/images/Method.png" alt="Method" title="Method" /></title>
-			<span class="method-title">set_brackets_highlighting</span>
-					</dt>
-		<dd class="index-item-body">
-			<div class="index-item-details"><a href="geshi/core/GeSHi.html#methodset_brackets_highlighting">GeSHi::set_brackets_highlighting()</a> in geshi.php</div>
-							<div class="index-item-description">Turns highlighting on/off for brackets</div>
-					</dd>
-			<dt class="field">
-						<img src="media/images/Method.png" alt="Method" title="Method" /></title>
-			<span class="method-title">set_brackets_style</span>
-					</dt>
-		<dd class="index-item-body">
-			<div class="index-item-details"><a href="geshi/core/GeSHi.html#methodset_brackets_style">GeSHi::set_brackets_style()</a> in geshi.php</div>
-							<div class="index-item-description">Sets the styles for brackets. If $preserve_defaults is  true, then styles are merged with the default styles, with the  user defined styles having priority</div>
-					</dd>
-			<dt class="field">
-						<img src="media/images/Method.png" alt="Method" title="Method" /></title>
-			<span class="method-title">set_case_keywords</span>
-					</dt>
-		<dd class="index-item-body">
-			<div class="index-item-details"><a href="geshi/core/GeSHi.html#methodset_case_keywords">GeSHi::set_case_keywords()</a> in geshi.php</div>
-							<div class="index-item-description">Sets the case that keywords should use when found. Use the constants:</div>
-					</dd>
-			<dt class="field">
-						<img src="media/images/Method.png" alt="Method" title="Method" /></title>
-			<span class="method-title">set_case_sensitivity</span>
-					</dt>
-		<dd class="index-item-body">
-			<div class="index-item-details"><a href="geshi/core/GeSHi.html#methodset_case_sensitivity">GeSHi::set_case_sensitivity()</a> in geshi.php</div>
-							<div class="index-item-description">Sets whether a set of keywords are checked for in a case sensitive manner</div>
-					</dd>
-			<dt class="field">
-						<img src="media/images/Method.png" alt="Method" title="Method" /></title>
-			<span class="method-title">set_code_style</span>
-					</dt>
-		<dd class="index-item-body">
-			<div class="index-item-details"><a href="geshi/core/GeSHi.html#methodset_code_style">GeSHi::set_code_style()</a> in geshi.php</div>
-							<div class="index-item-description">Sets the style for the actual code. This should be a string</div>
-					</dd>
-			<dt class="field">
-						<img src="media/images/Method.png" alt="Method" title="Method" /></title>
-			<span class="method-title">set_comments_highlighting</span>
-					</dt>
-		<dd class="index-item-body">
-			<div class="index-item-details"><a href="geshi/core/GeSHi.html#methodset_comments_highlighting">GeSHi::set_comments_highlighting()</a> in geshi.php</div>
-							<div class="index-item-description">Turns highlighting on/off for comment groups</div>
-					</dd>
-			<dt class="field">
-						<img src="media/images/Method.png" alt="Method" title="Method" /></title>
-			<span class="method-title">set_comments_style</span>
-					</dt>
-		<dd class="index-item-body">
-			<div class="index-item-details"><a href="geshi/core/GeSHi.html#methodset_comments_style">GeSHi::set_comments_style()</a> in geshi.php</div>
-							<div class="index-item-description">Sets the styles for comment groups.  If $preserve_defaults is  true, then styles are merged with the default styles, with the  user defined styles having priority</div>
-					</dd>
-			<dt class="field">
-						<img src="media/images/Method.png" alt="Method" title="Method" /></title>
-			<span class="method-title">set_encoding</span>
-					</dt>
-		<dd class="index-item-body">
-			<div class="index-item-details"><a href="geshi/core/GeSHi.html#methodset_encoding">GeSHi::set_encoding()</a> in geshi.php</div>
-							<div class="index-item-description">Sets the encoding used for htmlspecialchars(), for international  support.</div>
-					</dd>
-			<dt class="field">
-						<img src="media/images/Method.png" alt="Method" title="Method" /></title>
-			<span class="method-title">set_escape_characters_highlighting</span>
-					</dt>
-		<dd class="index-item-body">
-			<div class="index-item-details"><a href="geshi/core/GeSHi.html#methodset_escape_characters_highlighting">GeSHi::set_escape_characters_highlighting()</a> in geshi.php</div>
-							<div class="index-item-description">Turns highlighting on/off for escaped characters</div>
-					</dd>
-			<dt class="field">
-						<img src="media/images/Method.png" alt="Method" title="Method" /></title>
-			<span class="method-title">set_escape_characters_style</span>
-					</dt>
-		<dd class="index-item-body">
-			<div class="index-item-details"><a href="geshi/core/GeSHi.html#methodset_escape_characters_style">GeSHi::set_escape_characters_style()</a> in geshi.php</div>
-							<div class="index-item-description">Sets the styles for escaped characters. If $preserve_defaults is  true, then styles are merged with the default styles, with the  user defined styles having priority</div>
-					</dd>
-			<dt class="field">
-						<img src="media/images/Method.png" alt="Method" title="Method" /></title>
-			<span class="method-title">set_footer_content</span>
-					</dt>
-		<dd class="index-item-body">
-			<div class="index-item-details"><a href="geshi/core/GeSHi.html#methodset_footer_content">GeSHi::set_footer_content()</a> in geshi.php</div>
-							<div class="index-item-description">Sets the content of the footer block</div>
-					</dd>
-			<dt class="field">
-						<img src="media/images/Method.png" alt="Method" title="Method" /></title>
-			<span class="method-title">set_footer_content_style</span>
-					</dt>
-		<dd class="index-item-body">
-			<div class="index-item-details"><a href="geshi/core/GeSHi.html#methodset_footer_content_style">GeSHi::set_footer_content_style()</a> in geshi.php</div>
-							<div class="index-item-description">Sets the style for the footer content</div>
-					</dd>
-			<dt class="field">
-						<img src="media/images/Method.png" alt="Method" title="Method" /></title>
-			<span class="method-title">set_header_content</span>
-					</dt>
-		<dd class="index-item-body">
-			<div class="index-item-details"><a href="geshi/core/GeSHi.html#methodset_header_content">GeSHi::set_header_content()</a> in geshi.php</div>
-							<div class="index-item-description">Sets the content of the header block</div>
-					</dd>
-			<dt class="field">
-						<img src="media/images/Method.png" alt="Method" title="Method" /></title>
-			<span class="method-title">set_header_content_style</span>
-					</dt>
-		<dd class="index-item-body">
-			<div class="index-item-details"><a href="geshi/core/GeSHi.html#methodset_header_content_style">GeSHi::set_header_content_style()</a> in geshi.php</div>
-							<div class="index-item-description">Sets the style for the header content</div>
-					</dd>
-			<dt class="field">
-						<img src="media/images/Method.png" alt="Method" title="Method" /></title>
-			<span class="method-title">set_header_type</span>
-					</dt>
-		<dd class="index-item-body">
-			<div class="index-item-details"><a href="geshi/core/GeSHi.html#methodset_header_type">GeSHi::set_header_type()</a> in geshi.php</div>
-							<div class="index-item-description">Sets the type of header to be used.</div>
-					</dd>
-			<dt class="field">
-						<img src="media/images/Method.png" alt="Method" title="Method" /></title>
-			<span class="method-title">set_highlight_lines_extra_style</span>
-					</dt>
-		<dd class="index-item-body">
-			<div class="index-item-details"><a href="geshi/core/GeSHi.html#methodset_highlight_lines_extra_style">GeSHi::set_highlight_lines_extra_style()</a> in geshi.php</div>
-							<div class="index-item-description">Sets the style for extra-highlighted lines</div>
-					</dd>
-			<dt class="field">
-						<img src="media/images/Method.png" alt="Method" title="Method" /></title>
-			<span class="method-title">set_important_styles</span>
-					</dt>
-		<dd class="index-item-body">
-			<div class="index-item-details"><a href="geshi/core/GeSHi.html#methodset_important_styles">GeSHi::set_important_styles()</a> in geshi.php</div>
-							<div class="index-item-description">Sets styles for important parts of the code</div>
-					</dd>
-			<dt class="field">
-						<img src="media/images/Method.png" alt="Method" title="Method" /></title>
-			<span class="method-title">set_keyword_group_highlighting</span>
-					</dt>
-		<dd class="index-item-body">
-			<div class="index-item-details"><a href="geshi/core/GeSHi.html#methodset_keyword_group_highlighting">GeSHi::set_keyword_group_highlighting()</a> in geshi.php</div>
-							<div class="index-item-description">Turns highlighting on/off for a keyword group</div>
-					</dd>
-			<dt class="field">
-						<img src="media/images/Method.png" alt="Method" title="Method" /></title>
-			<span class="method-title">set_keyword_group_style</span>
-					</dt>
-		<dd class="index-item-body">
-			<div class="index-item-details"><a href="geshi/core/GeSHi.html#methodset_keyword_group_style">GeSHi::set_keyword_group_style()</a> in geshi.php</div>
-							<div class="index-item-description">Sets the style for a keyword group. If $preserve_defaults is  true, then styles are merged with the default styles, with the  user defined styles having priority</div>
-					</dd>
-			<dt class="field">
-						<img src="media/images/Method.png" alt="Method" title="Method" /></title>
-			<span class="method-title">set_language</span>
-					</dt>
-		<dd class="index-item-body">
-			<div class="index-item-details"><a href="geshi/core/GeSHi.html#methodset_language">GeSHi::set_language()</a> in geshi.php</div>
-							<div class="index-item-description">Sets the language for this object</div>
-					</dd>
-			<dt class="field">
-						<img src="media/images/Method.png" alt="Method" title="Method" /></title>
-			<span class="method-title">set_language_path</span>
-					</dt>
-		<dd class="index-item-body">
-			<div class="index-item-details"><a href="geshi/core/GeSHi.html#methodset_language_path">GeSHi::set_language_path()</a> in geshi.php</div>
-							<div class="index-item-description">Sets the path to the directory containing the language files. Note  that this path is relative to the directory of the script that included  geshi.php, NOT geshi.php itself.</div>
-					</dd>
-			<dt class="field">
-						<img src="media/images/Method.png" alt="Method" title="Method" /></title>
-			<span class="method-title">set_line_ending</span>
-					</dt>
-		<dd class="index-item-body">
-			<div class="index-item-details"><a href="geshi/core/GeSHi.html#methodset_line_ending">GeSHi::set_line_ending()</a> in geshi.php</div>
-							<div class="index-item-description">Sets the line-ending</div>
-					</dd>
-			<dt class="field">
-						<img src="media/images/Method.png" alt="Method" title="Method" /></title>
-			<span class="method-title">set_line_style</span>
-					</dt>
-		<dd class="index-item-body">
-			<div class="index-item-details"><a href="geshi/core/GeSHi.html#methodset_line_style">GeSHi::set_line_style()</a> in geshi.php</div>
-							<div class="index-item-description">Sets the styles for the line numbers.</div>
-					</dd>
-			<dt class="field">
-						<img src="media/images/Method.png" alt="Method" title="Method" /></title>
-			<span class="method-title">set_link_styles</span>
-					</dt>
-		<dd class="index-item-body">
-			<div class="index-item-details"><a href="geshi/core/GeSHi.html#methodset_link_styles">GeSHi::set_link_styles()</a> in geshi.php</div>
-							<div class="index-item-description">Sets styles for links in code</div>
-					</dd>
-			<dt class="field">
-						<img src="media/images/Method.png" alt="Method" title="Method" /></title>
-			<span class="method-title">set_link_target</span>
-					</dt>
-		<dd class="index-item-body">
-			<div class="index-item-details"><a href="geshi/core/GeSHi.html#methodset_link_target">GeSHi::set_link_target()</a> in geshi.php</div>
-							<div class="index-item-description">Sets the target for links in code</div>
-					</dd>
-			<dt class="field">
-						<img src="media/images/Method.png" alt="Method" title="Method" /></title>
-			<span class="method-title">set_methods_highlighting</span>
-					</dt>
-		<dd class="index-item-body">
-			<div class="index-item-details"><a href="geshi/core/GeSHi.html#methodset_methods_highlighting">GeSHi::set_methods_highlighting()</a> in geshi.php</div>
-							<div class="index-item-description">Turns highlighting on/off for methods</div>
-					</dd>
-			<dt class="field">
-						<img src="media/images/Method.png" alt="Method" title="Method" /></title>
-			<span class="method-title">set_methods_style</span>
-					</dt>
-		<dd class="index-item-body">
-			<div class="index-item-details"><a href="geshi/core/GeSHi.html#methodset_methods_style">GeSHi::set_methods_style()</a> in geshi.php</div>
-							<div class="index-item-description">Sets the styles for methods. $key is a number that references the</div>
-					</dd>
-			<dt class="field">
-						<img src="media/images/Method.png" alt="Method" title="Method" /></title>
-			<span class="method-title">set_numbers_highlighting</span>
-					</dt>
-		<dd class="index-item-body">
-			<div class="index-item-details"><a href="geshi/core/GeSHi.html#methodset_numbers_highlighting">GeSHi::set_numbers_highlighting()</a> in geshi.php</div>
-							<div class="index-item-description">Turns highlighting on/off for numbers</div>
-					</dd>
-			<dt class="field">
-						<img src="media/images/Method.png" alt="Method" title="Method" /></title>
-			<span class="method-title">set_numbers_style</span>
-					</dt>
-		<dd class="index-item-body">
-			<div class="index-item-details"><a href="geshi/core/GeSHi.html#methodset_numbers_style">GeSHi::set_numbers_style()</a> in geshi.php</div>
-							<div class="index-item-description">Sets the styles for numbers. If $preserve_defaults is  true, then styles are merged with the default styles, with the  user defined styles having priority</div>
-					</dd>
-			<dt class="field">
-						<img src="media/images/Method.png" alt="Method" title="Method" /></title>
-			<span class="method-title">set_overall_class</span>
-					</dt>
-		<dd class="index-item-body">
-			<div class="index-item-details"><a href="geshi/core/GeSHi.html#methodset_overall_class">GeSHi::set_overall_class()</a> in geshi.php</div>
-							<div class="index-item-description">Sets the overall classname for this block of code. This  class can then be used in a stylesheet to style this object's  output</div>
-					</dd>
-			<dt class="field">
-						<img src="media/images/Method.png" alt="Method" title="Method" /></title>
-			<span class="method-title">set_overall_id</span>
-					</dt>
-		<dd class="index-item-body">
-			<div class="index-item-details"><a href="geshi/core/GeSHi.html#methodset_overall_id">GeSHi::set_overall_id()</a> in geshi.php</div>
-							<div class="index-item-description">Sets the overall id for this block of code. This id can then  be used in a stylesheet to style this object's output</div>
-					</dd>
-			<dt class="field">
-						<img src="media/images/Method.png" alt="Method" title="Method" /></title>
-			<span class="method-title">set_overall_style</span>
-					</dt>
-		<dd class="index-item-body">
-			<div class="index-item-details"><a href="geshi/core/GeSHi.html#methodset_overall_style">GeSHi::set_overall_style()</a> in geshi.php</div>
-							<div class="index-item-description">Sets the styles for the code that will be outputted  when this object is parsed. The style should be a  string of valid stylesheet declarations</div>
-					</dd>
-			<dt class="field">
-						<img src="media/images/Method.png" alt="Method" title="Method" /></title>
-			<span class="method-title">set_regexps_highlighting</span>
-					</dt>
-		<dd class="index-item-body">
-			<div class="index-item-details"><a href="geshi/core/GeSHi.html#methodset_regexps_highlighting">GeSHi::set_regexps_highlighting()</a> in geshi.php</div>
-							<div class="index-item-description">Turns highlighting on/off for regexps</div>
-					</dd>
-			<dt class="field">
-						<img src="media/images/Method.png" alt="Method" title="Method" /></title>
-			<span class="method-title">set_regexps_style</span>
-					</dt>
-		<dd class="index-item-body">
-			<div class="index-item-details"><a href="geshi/core/GeSHi.html#methodset_regexps_style">GeSHi::set_regexps_style()</a> in geshi.php</div>
-							<div class="index-item-description">Sets the styles for regexps. If $preserve_defaults is  true, then styles are merged with the default styles, with the  user defined styles having priority</div>
-					</dd>
-			<dt class="field">
-						<img src="media/images/Method.png" alt="Method" title="Method" /></title>
-			<span class="method-title">set_source</span>
-					</dt>
-		<dd class="index-item-body">
-			<div class="index-item-details"><a href="geshi/core/GeSHi.html#methodset_source">GeSHi::set_source()</a> in geshi.php</div>
-							<div class="index-item-description">Sets the source code for this object</div>
-					</dd>
-			<dt class="field">
-						<img src="media/images/Method.png" alt="Method" title="Method" /></title>
-			<span class="method-title">set_strings_highlighting</span>
-					</dt>
-		<dd class="index-item-body">
-			<div class="index-item-details"><a href="geshi/core/GeSHi.html#methodset_strings_highlighting">GeSHi::set_strings_highlighting()</a> in geshi.php</div>
-							<div class="index-item-description">Turns highlighting on/off for strings</div>
-					</dd>
-			<dt class="field">
-						<img src="media/images/Method.png" alt="Method" title="Method" /></title>
-			<span class="method-title">set_strings_style</span>
-					</dt>
-		<dd class="index-item-body">
-			<div class="index-item-details"><a href="geshi/core/GeSHi.html#methodset_strings_style">GeSHi::set_strings_style()</a> in geshi.php</div>
-							<div class="index-item-description">Sets the styles for strings. If $preserve_defaults is  true, then styles are merged with the default styles, with the  user defined styles having priority</div>
-					</dd>
-			<dt class="field">
-						<img src="media/images/Method.png" alt="Method" title="Method" /></title>
-			<span class="method-title">set_symbols_highlighting</span>
-					</dt>
-		<dd class="index-item-body">
-			<div class="index-item-details"><a href="geshi/core/GeSHi.html#methodset_symbols_highlighting">GeSHi::set_symbols_highlighting()</a> in geshi.php</div>
-							<div class="index-item-description">Turns highlighting on/off for symbols</div>
-					</dd>
-			<dt class="field">
-						<img src="media/images/Method.png" alt="Method" title="Method" /></title>
-			<span class="method-title">set_symbols_style</span>
-					</dt>
-		<dd class="index-item-body">
-			<div class="index-item-details"><a href="geshi/core/GeSHi.html#methodset_symbols_style">GeSHi::set_symbols_style()</a> in geshi.php</div>
-							<div class="index-item-description">Sets the styles for symbols. If $preserve_defaults is  true, then styles are merged with the default styles, with the  user defined styles having priority</div>
-					</dd>
-			<dt class="field">
-						<img src="media/images/Method.png" alt="Method" title="Method" /></title>
-			<span class="method-title">set_tab_width</span>
-					</dt>
-		<dd class="index-item-body">
-			<div class="index-item-details"><a href="geshi/core/GeSHi.html#methodset_tab_width">GeSHi::set_tab_width()</a> in geshi.php</div>
-							<div class="index-item-description">Sets how many spaces a tab is substituted for</div>
-					</dd>
-			<dt class="field">
-						<img src="media/images/Method.png" alt="Method" title="Method" /></title>
-			<span class="method-title">set_url_for_keyword_group</span>
-					</dt>
-		<dd class="index-item-body">
-			<div class="index-item-details"><a href="geshi/core/GeSHi.html#methodset_url_for_keyword_group">GeSHi::set_url_for_keyword_group()</a> in geshi.php</div>
-							<div class="index-item-description">Sets the base URL to be used for keywords</div>
-					</dd>
-			<dt class="field">
-						<img src="media/images/Method.png" alt="Method" title="Method" /></title>
-			<span class="method-title">set_use_language_tab_width</span>
-					</dt>
-		<dd class="index-item-body">
-			<div class="index-item-details"><a href="geshi/core/GeSHi.html#methodset_use_language_tab_width">GeSHi::set_use_language_tab_width()</a> in geshi.php</div>
-							<div class="index-item-description">Sets whether or not to use tab-stop width specifed by language</div>
-					</dd>
-			<dt class="field">
-						<img src="media/images/Method.png" alt="Method" title="Method" /></title>
-			<span class="method-title">start_line_numbers_at</span>
-					</dt>
-		<dd class="index-item-body">
-			<div class="index-item-details"><a href="geshi/core/GeSHi.html#methodstart_line_numbers_at">GeSHi::start_line_numbers_at()</a> in geshi.php</div>
-							<div class="index-item-description">Sets what number line numbers should start at. Should  be a positive integer, and will be converted to one.</div>
-					</dd>
-		</dl>
-
-<div class="index-letter-menu">
-	<a class="index-letter" href="elementindex_geshi.html#a">a</a>
-	<a class="index-letter" href="elementindex_geshi.html#d">d</a>
-	<a class="index-letter" href="elementindex_geshi.html#e">e</a>
-	<a class="index-letter" href="elementindex_geshi.html#g">g</a>
-	<a class="index-letter" href="elementindex_geshi.html#h">h</a>
-	<a class="index-letter" href="elementindex_geshi.html#l">l</a>
-	<a class="index-letter" href="elementindex_geshi.html#o">o</a>
-	<a class="index-letter" href="elementindex_geshi.html#p">p</a>
-	<a class="index-letter" href="elementindex_geshi.html#r">r</a>
-	<a class="index-letter" href="elementindex_geshi.html#s">s</a>
-</div>	</body>
-</html>

examples/includes/geshi/docs/api/errors.html

@@ -1,20 +0,0 @@
-<?xml version="1.0" encoding="iso-8859-1"?>
-<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
-  <html xmlns="http://www.w3.org/1999/xhtml">
-		<head>
-			<!-- template designed by Marco Von Ballmoos -->
-			<title>phpDocumentor Parser Errors and Warnings</title>
-			<link rel="stylesheet" href="media/stylesheet.css" />
-			<meta http-equiv='Content-Type' content='text/html; charset=iso-8859-1'/>
-		</head>
-		<body>
-						<a href="#Post-parsing">Post-parsing</a><br>
-<a name="geshi.php"></a>
-<h1>geshi.php</h1>
-<h2>Errors:</h2><br>
-<b>Error on line 569</b> - DocBlock has multiple @access tags, illegal. ignoring additional tag "@access private"<br>
-	<p class="notes" id="credit">
-		Documentation generated on Thu, 25 Dec 2008 14:34:53 +0100 by <a href="http://www.phpdoc.org" target="_blank">phpDocumentor 1.4.2</a>
-	</p>
-	</body>
-</html>

examples/includes/geshi/docs/api/geshi/core/_geshi.php.html

@@ -1,478 +0,0 @@
-<?xml version="1.0" encoding="iso-8859-1"?>
-<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
-  <html xmlns="http://www.w3.org/1999/xhtml">
-		<head>
-			<!-- template designed by Marco Von Ballmoos -->
-			<title>Docs for page geshi.php</title>
-			<link rel="stylesheet" href="../../media/stylesheet.css" />
-			<meta http-equiv='Content-Type' content='text/html; charset=iso-8859-1'/>
-		</head>
-		<body>
-			<div class="page-body">			
-<h2 class="file-name"><img src="../../media/images/Page_logo.png" alt="File" style="vertical-align: middle">/geshi.php</h2>
-
-<a name="sec-description"></a>
-<div class="info-box">
-	<div class="info-box-title">Description</div>
-	<div class="nav-bar">
-					<span class="disabled">Description</span> |
-							<a href="#sec-classes">Classes</a>
-			|									<a href="#sec-constants">Constants</a>
-			|									<a href="#sec-functions">Functions</a>
-			</div>
-	<div class="info-box-body">	
-		<!-- ========== Info from phpDoc block ========= -->
-<p class="short-description">GeSHi - Generic Syntax Highlighter</p>
-<p class="description"><p>The GeSHi class for Generic Syntax Highlighting. Please refer to the  documentation at http://qbnz.com/highlighter/documentation.php for more  information about how to use this class.</p><p>For changes, release notes, TODOs etc, see the relevant files in the docs/  directory.</p><p>This file is part of GeSHi.</p><p>GeSHi is free software; you can redistribute it and/or modify   it under the terms of the GNU General Public License as published by   the Free Software Foundation; either version 2 of the License, or   (at your option) any later version.</p><p>GeSHi is distributed in the hope that it will be useful,   but WITHOUT ANY WARRANTY; without even the implied warranty of   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the   GNU General Public License for more details.</p><p>You should have received a copy of the GNU General Public License   along with GeSHi; if not, write to the Free Software   Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA</p></p>
-	<ul class="tags">
-				<li><span class="field">author:</span> Nigel McNie &lt;<a href="mailto:nigel@geshi.org">nigel@geshi.org</a>&gt;, Benny Baumann &lt;BenBE@omorphia.de&gt;</li>
-				<li><span class="field">copyright:</span> (C) 2004 - 2007 Nigel McNie, (C) 2007 - 2008 Benny Baumann</li>
-				<li><span class="field">filesource:</span> <a href="../../__filesource/fsource_geshi_core_geshi.php.html">Source Code for this file</a></li>
-				<li><span class="field">license:</span> <a href="http://gnu.org/copyleft/gpl.html">GNU GPL</a></li>
-			</ul>
-		
-			</div>
-</div>
-		
-	<a name="sec-classes"></a>	
-	<div class="info-box">
-		<div class="info-box-title">Classes</div>
-		<div class="nav-bar">
-			<a href="#sec-description">Description</a> |
-			<span class="disabled">Classes</span>
-			|										<a href="#sec-constants">Constants</a>
-				|													<a href="#sec-functions">Functions</a>
-					</div>
-		<div class="info-box-body">	
-			<table cellpadding="2" cellspacing="0" class="class-table">
-				<tr>
-					<th class="class-table-header">Class</th>
-					<th class="class-table-header">Description</th>
-				</tr>
-								<tr>
-					<td style="padding-right: 2em; vertical-align: top; white-space: nowrap">
-						<img src="../../media/images/Class.png"
-								 alt=" class"
-								 title=" class"/>
-						<a href="../../geshi/core/GeSHi.html">GeSHi</a>
-					</td>
-					<td>
-											The GeSHi Class.
-										</td>
-				</tr>
-							</table>
-		</div>
-	</div>
-
-	
-	<a name="sec-constants"></a>	
-	<div class="info-box">
-		<div class="info-box-title">Constants</div>
-		<div class="nav-bar">
-			<a href="#sec-description">Description</a> |
-							<a href="#sec-classes">Classes</a>
-				|									<span class="disabled">Constants</span>
-			|										<a href="#sec-functions">Functions</a>
-					</div>
-		<div class="info-box-body">	
-			<a name="defineGESHI_ACTIVE"><!-- --></a>
-<div class="oddrow">
-	
-	<div>
-		<img src="../../media/images/Constant.png" />
-		<span class="const-title">
-			<span class="const-name">GESHI_ACTIVE</span> = 2
-			(line <span class="line-number"><a href="../../__filesource/fsource_geshi_core_geshi.php.html#a107">107</a></span>)
-		</span>
-	</div>
-	
-	<!-- ========== Info from phpDoc block ========= -->
-<p class="short-description">Links in the source in the :active state</p>
-	
-		
-</div>
-<a name="defineGESHI_CAPS_LOWER"><!-- --></a>
-<div class="evenrow">
-	
-	<div>
-		<img src="../../media/images/Constant.png" />
-		<span class="const-title">
-			<span class="const-name">GESHI_CAPS_LOWER</span> = 2
-			(line <span class="line-number"><a href="../../__filesource/fsource_geshi_core_geshi.php.html#a99">99</a></span>)
-		</span>
-	</div>
-	
-	<!-- ========== Info from phpDoc block ========= -->
-<p class="short-description">Leave keywords found as the case that they are</p>
-	
-		
-</div>
-<a name="defineGESHI_CAPS_NO_CHANGE"><!-- --></a>
-<div class="oddrow">
-	
-	<div>
-		<img src="../../media/images/Constant.png" />
-		<span class="const-title">
-			<span class="const-name">GESHI_CAPS_NO_CHANGE</span> = 0
-			(line <span class="line-number"><a href="../../__filesource/fsource_geshi_core_geshi.php.html#a95">95</a></span>)
-		</span>
-	</div>
-	
-	<!-- ========== Info from phpDoc block ========= -->
-<p class="short-description">Lowercase keywords found</p>
-	
-		
-</div>
-<a name="defineGESHI_CAPS_UPPER"><!-- --></a>
-<div class="evenrow">
-	
-	<div>
-		<img src="../../media/images/Constant.png" />
-		<span class="const-title">
-			<span class="const-name">GESHI_CAPS_UPPER</span> = 1
-			(line <span class="line-number"><a href="../../__filesource/fsource_geshi_core_geshi.php.html#a97">97</a></span>)
-		</span>
-	</div>
-	
-	<!-- ========== Info from phpDoc block ========= -->
-<p class="short-description">Uppercase keywords found</p>
-	
-		
-</div>
-<a name="defineGESHI_END_IMPORTANT"><!-- --></a>
-<div class="oddrow">
-	
-	<div>
-		<img src="../../media/images/Constant.png" />
-		<span class="const-title">
-			<span class="const-name">GESHI_END_IMPORTANT</span> = '&lt;END GeSHi&gt;'
-			(line <span class="line-number"><a href="../../__filesource/fsource_geshi_core_geshi.php.html#a117">117</a></span>)
-		</span>
-	</div>
-	
-	<!-- ========== Info from phpDoc block ========= -->
-<p class="short-description">The ender for important parts of the source</p>
-	
-		
-</div>
-<a name="defineGESHI_FANCY_LINE_NUMBERS"><!-- --></a>
-<div class="evenrow">
-	
-	<div>
-		<img src="../../media/images/Constant.png" />
-		<span class="const-title">
-			<span class="const-name">GESHI_FANCY_LINE_NUMBERS</span> = 2
-			(line <span class="line-number"><a href="../../__filesource/fsource_geshi_core_geshi.php.html#a67">67</a></span>)
-		</span>
-	</div>
-	
-	<!-- ========== Info from phpDoc block ========= -->
-<p class="short-description">Use fancy line numbers when building the result</p>
-	
-		
-</div>
-<a name="defineGESHI_HEADER_DIV"><!-- --></a>
-<div class="oddrow">
-	
-	<div>
-		<img src="../../media/images/Constant.png" />
-		<span class="const-title">
-			<span class="const-name">GESHI_HEADER_DIV</span> = 1
-			(line <span class="line-number"><a href="../../__filesource/fsource_geshi_core_geshi.php.html#a73">73</a></span>)
-		</span>
-	</div>
-	
-	<!-- ========== Info from phpDoc block ========= -->
-<p class="short-description">Use a &quot;div&quot; to surround the source</p>
-	
-		
-</div>
-<a name="defineGESHI_HEADER_NONE"><!-- --></a>
-<div class="evenrow">
-	
-	<div>
-		<img src="../../media/images/Constant.png" />
-		<span class="const-title">
-			<span class="const-name">GESHI_HEADER_NONE</span> = 0
-			(line <span class="line-number"><a href="../../__filesource/fsource_geshi_core_geshi.php.html#a71">71</a></span>)
-		</span>
-	</div>
-	
-	<!-- ========== Info from phpDoc block ========= -->
-<p class="short-description">Use nothing to surround the source</p>
-	
-		
-</div>
-<a name="defineGESHI_HEADER_PRE"><!-- --></a>
-<div class="oddrow">
-	
-	<div>
-		<img src="../../media/images/Constant.png" />
-		<span class="const-title">
-			<span class="const-name">GESHI_HEADER_PRE</span> = 2
-			(line <span class="line-number"><a href="../../__filesource/fsource_geshi_core_geshi.php.html#a75">75</a></span>)
-		</span>
-	</div>
-	
-	<!-- ========== Info from phpDoc block ========= -->
-<p class="short-description">Use a &quot;pre&quot; to surround the source</p>
-	
-		
-</div>
-<a name="defineGESHI_HEADER_PRE_TABLE"><!-- --></a>
-<div class="evenrow">
-	
-	<div>
-		<img src="../../media/images/Constant.png" />
-		<span class="const-title">
-			<span class="const-name">GESHI_HEADER_PRE_TABLE</span> = 4
-			(line <span class="line-number"><a href="../../__filesource/fsource_geshi_core_geshi.php.html#a91">91</a></span>)
-		</span>
-	</div>
-	
-	<!-- ========== Info from phpDoc block ========= -->
-<p class="short-description">Use a &quot;table&quot; to surround the source:</p>
-<p class="description"><p>&lt;table&gt;     &lt;thead&gt;&lt;tr&gt;&lt;td colspan=&quot;2&quot;&gt;$header&lt;/td&gt;&lt;/tr&gt;&lt;/thead&gt;     &lt;tbody&gt;&lt;tr&gt;&lt;td&gt;<pre>$linenumbers</pre>&lt;/td&gt;&lt;td&gt;<pre>$code></pre>&lt;/td&gt;&lt;/tr&gt;&lt;/tbody&gt;     &lt;tfooter&gt;&lt;tr&gt;&lt;td colspan=&quot;2&quot;&gt;$footer&lt;/td&gt;&lt;/tr&gt;&lt;/tfoot&gt;   &lt;/table&gt;</p><p>this is essentially only a workaround for Firefox, see sf#1651996 or take a look at  https://bugzilla.mozilla.org/show_bug.cgi?id=365805</p></p>
-	<ul class="tags">
-				<li><span class="field">note:</span> when linenumbers are disabled this is essentially the same as GESHI_HEADER_PRE</li>
-			</ul>
-	
-		
-</div>
-<a name="defineGESHI_HEADER_PRE_VALID"><!-- --></a>
-<div class="oddrow">
-	
-	<div>
-		<img src="../../media/images/Constant.png" />
-		<span class="const-title">
-			<span class="const-name">GESHI_HEADER_PRE_VALID</span> = 3
-			(line <span class="line-number"><a href="../../__filesource/fsource_geshi_core_geshi.php.html#a77">77</a></span>)
-		</span>
-	</div>
-	
-	<!-- ========== Info from phpDoc block ========= -->
-<p class="short-description">Use a pre to wrap lines when line numbers are enabled or to wrap the whole code.</p>
-	
-		
-</div>
-<a name="defineGESHI_HOVER"><!-- --></a>
-<div class="evenrow">
-	
-	<div>
-		<img src="../../media/images/Constant.png" />
-		<span class="const-title">
-			<span class="const-name">GESHI_HOVER</span> = 1
-			(line <span class="line-number"><a href="../../__filesource/fsource_geshi_core_geshi.php.html#a105">105</a></span>)
-		</span>
-	</div>
-	
-	<!-- ========== Info from phpDoc block ========= -->
-<p class="short-description">Links in the source in the :hover state</p>
-	
-		
-</div>
-<a name="defineGESHI_LANG_ROOT"><!-- --></a>
-<div class="oddrow">
-	
-	<div>
-		<img src="../../media/images/Constant.png" />
-		<span class="const-title">
-			<span class="const-name">GESHI_LANG_ROOT</span> = GESHI_ROOT.'geshi'.DIRECTORY_SEPARATOR
-			(line <span class="line-number"><a href="../../__filesource/fsource_geshi_core_geshi.php.html#a53">53</a></span>)
-		</span>
-	</div>
-	
-	<!-- ========== Info from phpDoc block ========= -->
-<p class="short-description">The language file directory for GeSHi</p>
-	
-		
-</div>
-<a name="defineGESHI_LINK"><!-- --></a>
-<div class="evenrow">
-	
-	<div>
-		<img src="../../media/images/Constant.png" />
-		<span class="const-title">
-			<span class="const-name">GESHI_LINK</span> = 0
-			(line <span class="line-number"><a href="../../__filesource/fsource_geshi_core_geshi.php.html#a103">103</a></span>)
-		</span>
-	</div>
-	
-	<!-- ========== Info from phpDoc block ========= -->
-<p class="short-description">Links in the source in the :link state</p>
-	
-		
-</div>
-<a name="defineGESHI_NORMAL_LINE_NUMBERS"><!-- --></a>
-<div class="oddrow">
-	
-	<div>
-		<img src="../../media/images/Constant.png" />
-		<span class="const-title">
-			<span class="const-name">GESHI_NORMAL_LINE_NUMBERS</span> = 1
-			(line <span class="line-number"><a href="../../__filesource/fsource_geshi_core_geshi.php.html#a65">65</a></span>)
-		</span>
-	</div>
-	
-	<!-- ========== Info from phpDoc block ========= -->
-<p class="short-description">Use normal line numbers when building the result</p>
-	
-		
-</div>
-<a name="defineGESHI_NO_LINE_NUMBERS"><!-- --></a>
-<div class="evenrow">
-	
-	<div>
-		<img src="../../media/images/Constant.png" />
-		<span class="const-title">
-			<span class="const-name">GESHI_NO_LINE_NUMBERS</span> = 0
-			(line <span class="line-number"><a href="../../__filesource/fsource_geshi_core_geshi.php.html#a63">63</a></span>)
-		</span>
-	</div>
-	
-	<!-- ========== Info from phpDoc block ========= -->
-<p class="short-description">Use no line numbers when building the result</p>
-	
-		
-</div>
-<a name="defineGESHI_ROOT"><!-- --></a>
-<div class="oddrow">
-	
-	<div>
-		<img src="../../media/images/Constant.png" />
-		<span class="const-title">
-			<span class="const-name">GESHI_ROOT</span> = dirname(__FILE__).DIRECTORY_SEPARATOR
-			(line <span class="line-number"><a href="../../__filesource/fsource_geshi_core_geshi.php.html#a49">49</a></span>)
-		</span>
-	</div>
-	
-	<!-- ========== Info from phpDoc block ========= -->
-<p class="short-description">The root directory for GeSHi</p>
-	
-		
-</div>
-<a name="defineGESHI_SECURITY_PARANOID"><!-- --></a>
-<div class="evenrow">
-	
-	<div>
-		<img src="../../media/images/Constant.png" />
-		<span class="const-title">
-			<span class="const-name">GESHI_SECURITY_PARANOID</span> = false
-			(line <span class="line-number"><a href="../../__filesource/fsource_geshi_core_geshi.php.html#a58">58</a></span>)
-		</span>
-	</div>
-	
-	<!-- ========== Info from phpDoc block ========= -->
-<p class="short-description">Tells GeSHi to be paranoid about security settings</p>
-	
-		
-</div>
-<a name="defineGESHI_START_IMPORTANT"><!-- --></a>
-<div class="oddrow">
-	
-	<div>
-		<img src="../../media/images/Constant.png" />
-		<span class="const-title">
-			<span class="const-name">GESHI_START_IMPORTANT</span> = '&lt;BEGIN GeSHi&gt;'
-			(line <span class="line-number"><a href="../../__filesource/fsource_geshi_core_geshi.php.html#a115">115</a></span>)
-		</span>
-	</div>
-	
-	<!-- ========== Info from phpDoc block ========= -->
-<p class="short-description">The starter for important parts of the source</p>
-	
-		
-</div>
-<a name="defineGESHI_VERSION"><!-- --></a>
-<div class="evenrow">
-	
-	<div>
-		<img src="../../media/images/Constant.png" />
-		<span class="const-title">
-			<span class="const-name">GESHI_VERSION</span> = '1.0.8.2',
-			(line <span class="line-number"><a href="../../__filesource/fsource_geshi_core_geshi.php.html#a44">44</a></span>)
-		</span>
-	</div>
-	
-	<!-- ========== Info from phpDoc block ========= -->
-<p class="short-description">The version of this GeSHi file</p>
-	
-		
-</div>
-<a name="defineGESHI_VISITED"><!-- --></a>
-<div class="oddrow">
-	
-	<div>
-		<img src="../../media/images/Constant.png" />
-		<span class="const-title">
-			<span class="const-name">GESHI_VISITED</span> = 3
-			(line <span class="line-number"><a href="../../__filesource/fsource_geshi_core_geshi.php.html#a109">109</a></span>)
-		</span>
-	</div>
-	
-	<!-- ========== Info from phpDoc block ========= -->
-<p class="short-description">Links in the source in the :visited state</p>
-	
-		
-</div>
-		</div>
-	</div>
-	
-	
-	<a name="sec-functions"></a>	
-	<div class="info-box">
-		<div class="info-box-title">Functions</div>
-		<div class="nav-bar">
-			<a href="#sec-description">Description</a> |
-							<a href="#sec-classes">Classes</a>
-				|													<a href="#sec-constants">Constants</a>
-				|									<span class="disabled">Functions</span>
-		</div>
-		<div class="info-box-body">	
-			<a name="functiongeshi_highlight" id="functiongeshi_highlight"><!-- --></a>
-<div class="evenrow">
-	
-	<div>
-		<img src="../../media/images/Function.png" />
-		<span class="method-title">geshi_highlight</span> (line <span class="line-number"><a href="../../__filesource/fsource_geshi_core_geshi.php.html#a4577">4577</a></span>)
-	</div> 
-
-	<!-- ========== Info from phpDoc block ========= -->
-<p class="short-description">Easy way to highlight stuff. Behaves just like highlight_string</p>
-	<ul class="tags">
-				<li><span class="field">return:</span> The code highlighted (if $return is true)</li>
-				<li><span class="field">since:</span> 1.0.2</li>
-			</ul>
-	<div class="method-signature">
-		<span class="method-result">string</span>
-		<span class="method-name">
-			geshi_highlight
-		</span>
-					(<span class="var-type">string</span>&nbsp;<span class="var-name">$string</span>, <span class="var-type">string</span>&nbsp;<span class="var-name">$language</span>, [<span class="var-type">string</span>&nbsp;<span class="var-name">$path</span> = <span class="var-default">null</span>], [<span class="var-type">boolean</span>&nbsp;<span class="var-name">$return</span> = <span class="var-default">false</span>])
-			</div>
-
-			<ul class="parameters">
-					<li>
-				<span class="var-type">string</span>
-				<span class="var-name">$string</span><span class="var-description">: The code to highlight</span>			</li>
-					<li>
-				<span class="var-type">string</span>
-				<span class="var-name">$language</span><span class="var-description">: The language to highlight the code in</span>			</li>
-					<li>
-				<span class="var-type">string</span>
-				<span class="var-name">$path</span><span class="var-description">: The path to the language files. You can leave this blank if you need                as from version 1.0.7 the path should be automatically detected</span>			</li>
-					<li>
-				<span class="var-type">boolean</span>
-				<span class="var-name">$return</span><span class="var-description">: Whether to return the result or to echo</span>			</li>
-				</ul>
-		
-	
-</div>
-		</div>
-	</div>
-	
-	<p class="notes" id="credit">
-		Documentation generated on Thu, 25 Dec 2008 14:34:34 +0100 by <a href="http://www.phpdoc.org" target="_blank">phpDocumentor 1.4.2</a>
-	</p>
-	</div></body>
-</html>

examples/includes/geshi/docs/api/index.html

@@ -1,24 +0,0 @@
-<?xml version="1.0" encoding="iso-8859-1"?>
-<!DOCTYPE html 
-     PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//FR"
-     "http://www.w3.org/TR/xhtml1/DTD/xhtml1-frameset.dtd">
-   <html xmlns="http://www.w3.org/1999/xhtml">
-<head>
-	<!-- Generated by phpDocumentor on Thu, 25 Dec 2008 14:34:34 +0100  -->
-  <title>GeSHi 1.0.8</title>
-  <meta http-equiv='Content-Type' content='text/html; charset=iso-8859-1'/>
-</head>
-
-<FRAMESET rows='120,*'>
-	<FRAME src='packages.html' name='left_top' frameborder="1" bordercolor="#999999">
-	<FRAMESET cols='25%,*'>
-		<FRAME src='li_geshi.html' name='left_bottom' frameborder="1" bordercolor="#999999">
-		<FRAME src='blank.html' name='right' frameborder="1" bordercolor="#999999">
-	</FRAMESET>
-	<NOFRAMES>
-		<H2>Frame Alert</H2>
-		<P>This document is designed to be viewed using the frames feature.
-		If you see this message, you are using a non-frame-capable web client.</P>
-	</NOFRAMES>
-</FRAMESET>
-</HTML>

examples/includes/geshi/docs/api/li_geshi.html

@@ -1,46 +0,0 @@
-<?xml version="1.0" encoding="iso-8859-1"?>
-<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
-  <html xmlns="http://www.w3.org/1999/xhtml">
-		<head>
-			<!-- template designed by Marco Von Ballmoos -->
-			<title></title>
-			<link rel="stylesheet" href="media/stylesheet.css" />
-			<meta http-equiv='Content-Type' content='text/html; charset=iso-8859-1'/>
-		</head>
-		<body>
-						<div class="package-title">geshi</div>
-<div class="package-details">
-			
-	<dl class="tree">
-		
-		<dt class="folder-title">Description</dt>
-		<dd>
-			<a href='classtrees_geshi.html' target='right'>Class trees</a><br />
-			<a href='elementindex_geshi.html' target='right'>Index of elements</a><br />
-							<a href="todolist.html" target="right">Todo List</a><br />
-					</dd>
-	
-							
-							
-																												
-						
-							
-											
-				<dt class="sub-package"><img class="tree-icon" src="media/images/package.png" alt="Sub-package">core</dt>
-				<dd>
-					<dl class="tree">
-																			<dt class="folder-title"><img class="tree-icon" src="media/images/class_folder.png" alt=" ">Classes</dt>
-															<dd><img class="tree-icon" src="media/images/Class.png" alt="Class"><a href='geshi/core/GeSHi.html' target='right'>GeSHi</a></dd>
-																										<dt class="folder-title"><img class="tree-icon" src="media/images/function_folder.png" alt=" ">Functions</dt>
-															<dd><img class="tree-icon" src="media/images/Function.png" alt="Function"><a href='geshi/core/_geshi.php.html#functiongeshi_highlight' target='right'>geshi_highlight</a></dd>
-																										<dt class="folder-title"><img class="tree-icon" src="media/images/folder.png" alt=" ">Files</dt>
-															<dd><img class="tree-icon" src="media/images/Page.png" alt="File"><a href='geshi/core/_geshi.php.html' target='right'>geshi.php</a></dd>
-																		</dl>
-				</dd>
-								
-						
-			</dl>
-</div>
-<p class="notes"><a href="http://www.phpdoc.org" target="_blank">phpDocumentor v <span class="field">1.4.2</span></a></p>
-</BODY>
-</HTML>

examples/includes/geshi/docs/api/media/banner.css

@@ -1,33 +0,0 @@
-body 
-{ 
-	background-color: #EEEEEE; 
-	margin: 0px; 
-	padding: 0px;
-}
-
-/* Banner (top bar) classes */
-
-.banner {  }
-
-.banner-menu 
-{
-	text-align: right;
-	clear: both;
-	padding: .5em;
-	border-top: 2px solid #AAAAAA;	
-}
-
-.banner-title 
-{ 
-	text-align: right; 
-	font-size: 20pt; 
-	font-weight: bold; 
-	margin: .2em;
-}
-
-.package-selector 
-{ 
-	background-color: #DDDDDD; 
-	border: 1px solid #AAAAAA; 
-	color: #000090;
-}