This commit adds a configure time option used to enable strict error
checking in decoder to make sure intermediate stage cofficients of
inverse transforms are within valid range of signed 16 bit integer.
For valid VP9 input streams, intermediate stage coefficients should
always stay within the range of a signed 16 bit integer. Coefficients
can go out of this range for invalid/corrupt VP9 streams. However,
strictly checking this range for every intermediate coefficient can
be a burden for decoder, therefore such validation is only enabled
with configure option --enable-coefficient-range-checking.
Change-Id: I47d47c8c4e48a922c3d223ca59064f51b3f0f5ed
This commit integrates the fast transform and quantization process
into skip_recode scheme in the rate-distortion optimization loop.
Previously the fast transform and quantization process was only
enabled for non-RD coding flow.
Change-Id: Ib7db4d39b7033f1495c75897271f769799198ba8
When no more data is available, vpx_codec_decode should
be called with NULL as data and 0 as data_sz.
vpx_codec_get_frame iterates over a list of the frames
available for display. The iterator storage should be initialized
to NULL to start the iteration. Iteration is complete when this
function returns NULL.
Also change the unit test to conform to the api spec.
Change-Id: I4b258b309f5df3d37d10c82f01492c0394181c2a
vp9_rb_bytes_written -> vp9_wb_bytes_written
+ move limits.h from the header to the source file where it's needed
Change-Id: Ifcdc856b4d4dcc2fff555ef11f86c86a0d83dab3
This patch allows the encoder to directly split the block
in partition search, therefore skip searching NONE. It
computes a score which measures whether 16x16 motion vectors
from the first pass in the current block are consistent with
each others. If they are inconsistent and we have enough Q
to encode, split the block directly, and skip searching NONE.
This feature is under flag CONFIG_FP_MB_STATS. In speed 2,
it further gives a speedup of 3-8% on sample yt clips as
compared to the previous version under the same flag. Overall,
the features under the flag will give 7-15% on typical yt
clips at up to 6000kbps data rate. The speedup at very high
data rate is not significant.
For hard stdhd clips:
park_joy_1080p @ 15000kbps: 504541ms -> 506293ms (-0.35%)
pedestrian_area_1080p @ 2000kbps: 326610ms -> 290090ms (+11.2%)
The compression performance using the features under the flag:
derf: -0.068%
yt: -0.189%
hd: -0.318%
stdhd:-0.183%
To use the feature, set CONFIG_FP_MB_STATS and turn on
cpi->use_fp_mb_stats.
Change-Id: Iad58a2966515c8861aa9eb211565b1864048d47f
This code was being called from two places and
difficult to parse. I rationalized it in to a
function to improve readability.
Change-Id: I154b8fe0b84e6c01e69601e78e67bd47c954d8b6
Re-organize the one-byte structure for 16x16 first pass
block. Add bits to indicate motion vector directions.
Change-Id: Id10754ba343dfc712c7fed5bcc85c67fa0bbcb89
vp9_variance8x8(), and vp9_get8x8var().
On a Nexus 7, vpxenc (in realtime mode, speed -12)
reported a performance improvement of ~1.2%.
Change-Id: I8a66ac2a0f550b407caa27816833bdc563395102
This patch allows the encoder to skip the search for partition
SPLIT, HORZ, VERT after the search for partition NONE is done
in RD optimization. It uses the first pass block-wise statistics
to make the decision. If all 16x16 blocks in the current partition
have zero motions and small residues from the frist pass statistics,
and it has small difference variance, further partition search is
skipped.
For speed 2 setting, experiments on general youtube clips show that
the speedup varies from 1% - 10%, 5% on average. On the performance
side in PSNR, derf 0.004%, yt -0.059%, hd -0.106%, stdhd 0.032%.
For hard stdhd clips:
park_joy_1080p, 502952 ms -> 503307 ms (-0.07%)
pedestrian_area_1080p, 227049 ms -> 220531 ms (+3%)
This feature is under the compilation flag CONFIG_FP_MB_STATS and
it is off in current setting.
Change-Id: I554537e9242178263b65ebe14a04f9c221b58bae
Remove the variable that indicates the relative block index. This
is explicitly covered by the use of pc_tree.
Change-Id: Ib13142582fff926c85e375bde656aa050add8350
This commit enables a chessboard pattern constrained partition
search for 720p and above resolutions. The scheme applies stricter
partition search to alternative blocks based on its above/left
neighboring blocks' partition range, as well as that of the
collocated blocks in the previous frame. It is currently turned
on at 16x16 block size level. The chessboard pattern is flipped
per coding frame.
The speed 3 runtime is reduced:
park_joy_1080p, 652832 ms -> 607738 ms (7% speed-up)
pedestrian_area_1080p, 215998 ms -> 200589 ms (8% speed-up)
The compression performance is changed:
hd -0.223%
stdhd -0.295%
Change-Id: I2d4d123ae89f7171562f618febb4d81789575b19
vp9_variance16x16(), and vp9_get16x16var().
On a Nexus 7, vpxenc (in realtime mode, speed -12)
reported a performance improvement of ~16.7%.
Change-Id: Ib163aa99f56e680194aabe00dacdd7f0899a4ecb
currently the only way to know if multiple alt-refs are enabled is to
inspect the encoder instance.
this reduces the size of the allocation by 75% when not using multiple
alt-refs
Change-Id: Ie4baa240c2897e64b766c6ad229674884b5a65b6
This commit replace the repetitive retrieve of max and min allowed
partition from speed_feature with local variables max_size and
min_size.
Change-Id: Ib06f11f16615e4876e4dd5fb6a968c6bf5f7b216
The get_chessboard_index() used to call the entire VP9_COMMON
struct pointer to retrieve the chessboard pattern index. This cl
makes it call the frame index directly.
Change-Id: I3cad9d209ea2e77a358085a04fe1ff0ddec5ba03
Remove the redundant index computation when store the first
pass block-wise statistics. Currently, a single byte is
allocated for a 16x16 blocks, and all the frame statistics
saved during the first pass will be kept in memory for use
in the second pass. For a 1920x1080 300-frame clip, it will
take about 2.3 MB memory. This feature is off in current
setting.
Change-Id: I135a95b348ec093d54c6a07e1e8237626909e3bd
Remove all the redundant dct functions (dct4x4, dct8x8)
in avx2 except dct32x32 those functions were copied originally from dct_sse2
Change-Id: I742576fbf5175f3ac09f2076976a9247b259323e
The issue was introduced by commit g9f37d14 with adding explicit
restrictions on reference-frame scale factors. The restriction
is checked against aligned-by-8 frame dimensions, not against
original ones. So, for example, frame of 35×35 actually can refer
to frame of 70×70, but the new check won't allow this. It will
compare 35 vs 72 (not 70), so 2x downscale limit will be exceeded.
Change-Id: Ic663693034440f64ac8312cbff9e1e773a921060
The partition search for 4x4 blocks takes unnecessary steps to
reconstruct pixels and an extra partition type update. This commit
removes such operations. No visible compression/speed difference.
Thanks to Yue (yuec@) for finding this issue.
Change-Id: I3f83824aa3fd3717d63be0b280fa57258939a70a
This commit turns on the existing vp9_get_prob function using
64 bit in the intermediate step. It fixes the ioc issue for 4K
above frame sizes (issue 828).
Change-Id: I9f627f3beca2c522f73b38fd2a3e7eefdff01a7c
The assignment of the variable mode_excluded in
vp9_rd_pick_inter_mode_sub8x8 takes redundant conditional jump.
This commit removes it.
Change-Id: Ie195fbe6e54ec2ade7093d562c456a2e93143704
A previous change, https://gerrit.chromium.org/gerrit/#/c/70632,
introduced a size validation for reference frames to insuare the
input stream is a valid VP9 stream. However, the logic requiring
all reference frames have valid size turned out to be too strict.
In this commit, we modify the validation to require one of the
reference frame has valid dimension. In addition, the decoder
reports error whenever it detects the use of reference frame
with invalid scalig ratio.
Change-Id: If8efc312244087556cfe00f1fcbdff811268ebad
The patch:
https://gerrit.chromium.org/gerrit/#/c/70814/
changed the test that determined whether the context
frame buffers needed to be reallocated or not.
The code checked for a change in total frame area
to signal the need to reallocate context buffers.
However, the above_context buffer needs to be
resized i:xf only the width of the frame has increased.
Change-Id: Ib89d75651af252908144cf662578d84f16cf30e6
1. Remove last reference flag for first frame upper layers in one pass mode.
2. Disable refresh golden frame flag for key frames.
Change-Id: I44ac1bd2c795169e4fbfdd078ea79a1d33a204d6
The value of mode_excluded has been properly set in
vp9_rd_pick_inter_mode_sb(). It is redundant to send it in
handle_inter_mode() and re-set the value again.
Change-Id: I408d4731f2f42e0bcf3ae62e85757717bb410471
This commit extends the chessboard pattern prediction filter search.
If the above and left blocks have the same prediction filter type,
the encoder will skip the prediction filter type search and use the
reference one.
The overall chessboard pattern prediction filter type search reduces
speed 3 runtime for hard clips. Experiments on park joy at 1080p
and 15000 kbps show that the runtime goes from 723265 ms to 65832 ms,
i.e., about 10% speed-up. Compression performance wise, it affects
the coding quality by
Change-Id: I880975497c7ad166532e9eea9bf46684d77ff327
derf: -0.326%
yt: -0.257%
hd: -0.241%
stdhd: -0.417%
This commit enables a chessboard pattern prediction filter type
search scheme for rate-distortion optimization speed-up. For the
inferred motion vector modes, the encoder can re-use its above/left
neighbor blocks' prediction filter type and skip a full test on
all possible filter types. Such operation is turned on/off
alternatively in a chessboard manner.
It is turned on in speed 3. For test clip pedestrian 1080p, the
runtime is reduced from 231500 ms -> 221700 ms. The compression
performance is changed:
derf: -0.147%
yt: -0.134%
hd: -0.079%
stdhd: -0.220%
Change-Id: I1912f278e7576c2dc632688e3ad7a257410c605a
When OUTPUT_YUV_DENOISED is enabled the encoder outputs the uncompressed,
denoised video to a separate file. Moved the point at which the file is
written to in order to avoid an extra blank frame at the beginning of the video.
Change-Id: I805f6a912b18b3d9cae59b13c5b8108279439ce3
This should be a local variable. Move the definition from
vp9_rd_pick_inter_mode_sb to handle_inter_mode.
Change-Id: I14f4168bb1c896ed04e8f6d4cd89fbf4c9839944
For sequences of resolution below 720p, the encoder will check
intra prediction modes and inter prediction modes from LAST_FRAME.
This commit turns on adaptive prediction filter scheme for sub8x8
blocks, where inter prediction modes are enabled. For the test
sequence bus at CIF, the speed 2 runtime goes down from 17879 ms
to 16783 ms, i.e., 6% speed up. The compression performance of
derf set is down by -0.128%.
Change-Id: I01d5321a5ceab4e0666ac5be56c52d896c7a8d45
The commit moved a call to vp9_clear_system_state() to a correct
location, i.e. prior function calls using floating point numbers.
This was to fix a mismatch mmx code and sse2 version, where a
floating point number used in adjust_frame_rate(cpi) gets NAN due
to mmx registers being in wrong state.
Change-Id: I40e0a6de98812000ccee6a729badb630604fd7e6
For gcc, when libvpx config option debug is disabled, added the
flag -DNDEBUG to disable the assertions in libvpx for some speedup.
Change-Id: Ifcb7b9e8ef5cbe5d07a24407b53b9a2923f596ee
This patch adds back in code that checks that the frame
size lies within defined bounds was inadvertantly removed
by a previous patch:
https://gerrit.chromium.org/gerrit/#/c/70814/
Change-Id: If526570ba559260c4b7e98098bc75f7700ae7f97
Separates HBD profile int two profiles (2 and 3) consistent with the
highbitdepth branch. This patch is ported from the original highbitdepth
branch patch: https://gerrit.chromium.org/gerrit/#/c/70460/
Two of the invalid file tests needed to be updated.
Change-Id: I6a4acd2f7a60b1fb4cbcc8e0dad4eab4248431e3
The bug sets the wrong pointer to the first pass mb stats
if the encoder does the re-coding in the second pass.
Change-Id: I8a11f45dd7dceb38de814adec24cecccae370d00
This patch is the first step toward simplifying the
frame buffer handling.
The final goal is to have a common frame buffer handling
framework for both encoder and decoder that incorporates
the existing ability to use externally allocated memory.
Change-Id: I2c378a4f54a39908915f46c4260e17a080db7ff1
This is a practical concern to allow us to fail in a decoder instance
if the size of a file is bigger than we can reasonably handle.
Change-Id: I0446b5502b1f8a48408107648ff2a8d187dca393
This commit changed the hard-coded DEFAULT_INTERP_FILTER to a speed
feature with the same default value: SWITCHABLE.
Change-Id: I7f54f40f1bd3f5277841d04b85db7a84e47313f1
and vp9_sad16x16_neon()
On a Nexus 7, vpxenc (in realtime mode, speed -6)
reported a performance improvement of ~17%.
Change-Id: I91e070cde2973451083d3f3d63b49b7886de9a85
2 pass only change to calculation of rd mult based on Q.
Make a small adjustment based on frame type and also
replace adjustment based on iifactor with an one based
on the ambient GF/ARF boost level.
Also fix multi arf bug / issue.
Overall these change give an slight improvement in ssim
but hurt psnr a little.
Change-Id: I5e1751e3ff5390a26f543d7855059e6fbcce105e
We target this speed to achieve similar encoding speed and better
compression than vp8 rt mode with cpu-used at -12.
Change-Id: Ic1bb4371c81a17ea80e83459c1cbf4c09a3498e8
The issue was introduced by commit g7c43fb6. If current frame
is repeated from existing-ref pool, frame buffer ref counter
is not decreased, so buffer isn't released. Decoder fails being
unable to allocate new frame buffer at some point.
Added a test vector to verify that the condition will not
recur later. Test vector was generated by the code in this patch:
https://gerrit.chromium.org/gerrit/#/c/70862/
Change-Id: I8af96eb5b9670176e01a281d2e18bd458712cf78
In vp8, statistics are collected about the different modes as they are searched.
This process is more complicated due to the variable block size. Fields were
added to the PICM_MODE_CONTEXT struct to hold this information for each point in
the search. The information is then taken from the appropriate part of the tree
during denoising.
Change-Id: I89261ab77ad637821287ae157dfdf694702b8e77
All changes are for spatial svc only.
1. Enable encoding hidden frames in each layer and use alt reference idex to reference the hidden frame in each layer
2. Use golden reference idx for spatial reference
3. For those layers that don't have hidden frames (caused by lack of frame buffers), reference a hidden frame in lower layers
4. Add "auto-alt-refs" in svc options
Change-Id: Idf27d1fd2fb5f3ffd9e86d2119235e3dad36c178
This commit fixes a potential out-of-boundary memory access due to
the use of reuse_inter_pred_sby in the non-RD coding flow. It
resolves the corresponding asan error.
Change-Id: Iff605f5921230966990013541cd855d698810922
This commit fixes a mismatched use case of block size in non-RD
intra prediction check. The residual SSE and variance should be
calculated per transform block size, instead of operating block
size, which caused chrome valgrind warning on conditional jump
based on uninitialized value (webm issue 823). This commit
resolves this issue.
Change-Id: I595c06599c7e0fd0e4a08736519ba68fc14bc79a
Also fix bugs related with corrupted frame handling.
Return VPX_CODEC_CORRUPT_FRAME when getting corrupted
block.
Change-Id: I7207ccc7c68c4df2b40b561315d16e49ccf7ff41
Refactoring to remove some duplication of probability
tables between tokenization and detokenization.
Change-Id: I2fc6a6497f9c0410021a9b41f828bc58a864e466
Use a weaker filter for second level arf frames.
Average gain across all sets and metrics ~0.3%
Remove code for arnr_type which is no longer
supported in VP9 which always uses a centered blur.
Re-factor and some cleanup.
Change-Id: Ieb4b8940e99e4e02b3fcc9fca6f2d4109e6ed639
pull the latest from libwebp.
Original source:
http://git.chromium.org/webm/libwebp.git
100644 blob 264210ba2807e4da47eb5d18c04cf869d89b9784 src/utils/thread.c
commit 46fd44c1042c9903b2f1ab87e9f200a13c7e702d
Author: James Zern <jzern@google.com>
Date: Tue Jul 8 19:53:28 2014 -0700
thread: remove harmless race on status_ in End()
if a thread was still doing work when End() was called there'd be a race
on worker->status_. in these cases, however, the specific value is
meaningless as it would be >= OK and the thread would have been shut
down properly, but we'll check 'impl_' instead to avoid any potential
TSan/DRD reports.
Change-Id: Ib93cbc226a099f07761f7bad765549dffb8054b1
Change-Id: Ib0ef25737b3c6d017fa74822e21ed58508230b91
Currently, vp9_diamond_search_sadx4() is only called when sse3 is
enabled, which is improper since sse2 optimization of sdx4df
functions are available. Changed to always use
vp9_diamond_search_sadx4().
Change-Id: I4b95d6b7a3c6c645783c373f0ba8d645ece24717
- fix indent, spelling
- drop some whitespace in some comments
- add an assert in vp9_setup_mask, it shouldn't be called on decode
error
Change-Id: Ic312a815e977a6f9cb81ceb7b039eeada76c5aa0
There are sse2 optimization of sdx4df functions. Instead of calling
vp9_refining_search_sadx4 only when sse3 is enabled, call it always.
Change-Id: I24f93818f7d4209d1425039e0eb099ff9ff08fe9
Use FAST_HEX in speed 5 and 6, which covers more points than
FAST_DIAMOND and improves motion search quality.
At speed 6, RTC set borg tests showed slight quality gain (psnr
gain: 0.143%, ssim gain: 0.226%). No noticeable encoding speed
change.
Change-Id: Ifa62875d9a52ee382ec494f271382bb77d8c67bf
This commit combined the full pel and sub pel motion search into a
single function to avoid code duplication. The commit does not change
encoder outputs.
Change-Id: Ibe18342c4f64073bef20f9cf6c6ca0a20d01bf0d
This commit enables a new quantization process for 32x32 2D-DCT
transform coefficient blocks. It improves the compression
performance of speed 5 by 1.4%. The overall compression gains of
speed 5 due to the new quantization scheme is 4.7%. It also includes
the SSSE3 implementation of the 32x32 quantization process.
Change-Id: I0855b124fd6462418683f783f5bcb44255c9993b
This patch fixes bug 633:
https://code.google.com/p/webm/issues/detail?id=633
The first decoded frame does not have to be a keyframe,
it could be an inter-frame that is coded intra-only.
This patch fixes the handling of intra-only frames.
A test vector has also been added that encodes 3
intra-only frames at the start of the clip. The
test vector was generated using the code in the
following patch:
https://gerrit.chromium.org/gerrit/#/c/70680/
Change-Id: Ib40b1dbf91aae2bc047e23c626eaef09d1860147
In the previous version, only certain buffers in the macroblockd were saved and
the restored. In this version, all of the buffers are saved and restored. The
code was then rolled into a loop for readability.
Also contains a tiny fix for when the -DOUTPUT_YUV_DENOISED flag is used.
Change-Id: Id925ef8b3fa122ae88acfa1d9a1e4df45df83518
Prepare for frame parallel decoding, the reference count buffers
need to be protected by mutex. Move vp9_thread.* to common
folder so that those buffers could use cross-platform mutex
from vp9_thread.*.
Change-Id: I541277cf15eefed6641555944f67f4a0bcdc8154
