Making overall logic more clear, moving "hacked" calculation of base filter
array pointer to get_filter_base() function.
Change-Id: Ibbd38a9f937e48d35bbbfef3ad933ab36664cccb
Add a full range motion search for regular block sizes. This runs
exhaustive search within the given reference area. This commit further
optimizes the search process by combining 4 points test into one
pipeline, which gives 30% speed-up as compared to run each individual
point at a time.
This full range search serves as a best possible motion search reference.
When replacing the diamond search with full range search, the speed 0
runtime of bus CIF at 2000 kbps goes from 153872ms to 623051ms. The
compression performance compared to speed 0 setting gains 0.585% for
derf set.
Change-Id: Ieef1225216b0b86b4ac4872fa7fb9e18bf2eabb3
Removed calls to vp9_update_mode_info_border since
they immediately followed code that initialized the
entire buffer to 0.
Change-Id: Ife06794daa20439a0b607a83a87f88df59afac40
- Disable mode info update in case where current frame is coded
as "show existing frame".
- Should fix issue 676.
Change-Id: Ibee681850eb307f982da6528d3e31cb94f881c08
The old code would start in a mixed state, where all the reference
frames were pointing to frame buffer 0, but the reference counts
were 0. This is why we needed special code for the first frame.
Change-Id: I734961012917654ff8c0c8b317aac00ab75ded1a
Using get_plane_block_size() instead of manipulation with subsampling
values, calculating all required values only once without redundant calls
to b_width_log2().
Change-Id: I00303f2a0926f9c4cb17f34591adda60615f8919
Jingning saw bitstream change with this patch. It could be true
that (mask_16x16_0 & 1) is 1, but (mask_16x16_1 & 1) is 0 in some
edge cases.
This reverts commit 8f05e70340.
Change-Id: I0a529435ce816a1e14653eb510d5090de276070a
In the decoder we don't need to save eobs, we can pass eob as an argument.
That's why removing eob arrays from VP9Decompressor and TileWorkerData,
and moving eob pointer from macroblockd_plane to macroblock_plane.
Change-Id: I8eb919acc837acfb3abdd8319af63d1bbca8217a
The performance gain of idct16x16_10_add_sse2 function is not
noticeable. However since both functions use the IDCT16_1D,
idct16x16_10_add_sse2 should be modified as well.
Tested with: park_joy_420_720p50.y4m
Change-Id: I02b957e36fcf997c677d15baf496533895271bff
Considering a horizontal edge, if mask_16x16 is 1 for an even-
indexed 8x8 block, then mask_16x16 is 1 for next 8x8 block in
same row. Similiar to a verticle edge, if mask_16x16 is 1 for
an even-rowed 8x8 block, then mask_16x16 is 1 for the 8x8 block
right below it in next raw. Based on that, the mask_16x16 checking
can be simplified to save cycles. The corresponding 8-pixel
vp9_mb_lpf_horizontal_edge code can also be removed.
Change-Id: Ic3fe7a5674322239208cbe2731dc3216ce2084f3
We only need qcoeff buffers in the encoder. Reducing TileWorkerData struct
and VP9Decompressor struct sizes by 24K.
Change-Id: Id148868461f7ffa3d3dd634b371503ae9c57e207
vp9_idct32x32_34_add_sse2:
speedup: 1.472
IDCT32_1D_34 and MULTIPLICATION_AND_ADD_2 are optimized
based on the fact that Only upper-left 8x8 has
non-zero values.
vp9_idct32x32_1024_add_sse2:
speedup: 1.032
Tested with: park_joy_420_720p50.y4m
Change-Id: I8670ce547552b48695049de298e2fc46ce28dfbc
The idea here is to allow "in frame" adjustment of the final Q
value used to encode each SB64, using segmentation.
There is also adjustment of the rd mult in regions of overspend.
Activated using aq_mode=2
Change-Id: I2f140cd898c9f877c32cd6d2e667f5e11ada4b1c
The decoder will construct inter predictor using lazy border extension,
while the encoder, going with multiple runs of motion search in the rate-
distortion optimization loop for each block, does border extension at
frame level. This commit makes separate the inter predictors for encoder
and decoder, respectively.
Change-Id: Ieca2fecba3a7201a6d64ef9f219e5d91e50559c3
This commit takes out vp9_extend_frame_borders from
vp9_setup_scale_factors.
The refactoring is for the preparation of the use of lazy border
extension at decoder. This makes it necessary to handle border
extension separately at encoder/decoder. The use of
vp9_extend_frame_borders will be removed, when lazy border extension
is ready.
Change-Id: Ia3baba3d179d5f11eee1634f19b3b319d2a59186
This patch followed "Add filter_selectively_vert_row2 to enable
parallel loopfiltering" commit, and added x86 SSE2 optimization
to do 16-pixel filtering in parallel. For other optimizations
(neon and dspr2), current 16-pixel functions were done by calling
8-pixel functions twice, and real 16-pixel functions could be added
later.
Decoder speedup:
tulip clip: 2% speed gain;
old_town_cross: 1.2% speed gain;
bus: 2% speed gain.
Change-Id: I4818a0c72f84b34f5fe678e496cf4a10238574b7
Both functions have no relation to motion vectors, so moving them from
vp9_findnearmv.h to vp9_blockd.h.
Change-Id: I74f524267886ab0fff4a2da793a10c906ed0f43a
Added filter_selectively_vert_row2 to be ready for parallel
loopfiltering in vertical direction. This change did 2-row
filtering at a time. If 2 vertically adjacent 8x8 blocks do same
type of filtering, we can do 16-pixel filtering in parallel.
Next, we need to provide 16-pixel loopfiltering functions in c
and optimized versions for codec speedup.
Change-Id: Idf97bbdd70566e55bd30e1fd25cb8544e33291be
Add support to do 16 pixel horizontal filtering in Neon.
Nexus devices saw about 0.5% decode speed increase.
Change-Id: I2993f6c2d49f31fa74976879eeaa289fd3f4e15d
This function is called from vp9_setup_past_independence() which is called
before the modified piece of code. Moving reset of inter_mode_probs into
vp9_init_mbmode_probs() for consistency.
Change-Id: Ib188e8798e1fbe15407fd501406761b746fdda95
Although no mismatch was indicated for 8/16 wide sub-pixel filters
in issue 661, they had similar problems that could cause mismatch
potentially. This patch fixed calculations in HORIZx8/16
and VERTx8/16.
Change-Id: I169961c9d40a20340995b7d22aafc89ccf30bfca
In commit "3d50da5397d20abc932d81453b26cde758293a40", the stack
pointer was modified while aligning the stack, and it needed to
be pop out at the end.
Change-Id: I062971e195f1f2ab9d0ab5fb84dcf215a0fcaa67
This patch fixed issue 661: "Decoder produces mismatched outputs
with ssse3 enabled and disabled." In sub-pixel filters, a pixel
value was multiplied by a filter coefficient, and the results
were added up. The order of adding up these multiplications had to
be arranged carefully to prevent incorrect overflowing.
Change-Id: Id08af4200fea9e1b896fc40157b8651c2c7e80f2
Reversing bit order of partition_context_lookup, and modifying accordingly
update_partition_context() and partition_plane_context().
Change-Id: I64a11f1a94962a3bf217de2f50698cb781db71a5
This rebase is a better implementation of the previous ones.
Modifications are done to reduce the total clock cycle.
Speedup: 1.341
Compiled with -O3
Tested with: park_joy_420_720p50.y4m
Change-Id: I940eaf283f60597ca0d9d2e13d518878d55ff02d
Since they used in encoder only. This commit also re-order includes
for the files that include vp9_extend.h
Change-Id: I929fc113f2135d3198cd1fc6a17434e5a2f8a459
This patch followed "Rewrite filter_selectively_horiz for parallel
loopfiltering" commit, and added x86 SSE2 optimization to do
16-pixel filtering in parallel. Also, corrected the declaration
of aligned arrays. For 8-pixel-in-parallel case, improved the
calculation of the masks and filters. Updated the threshold loading
since the thresholds were already duplicated. Updated neon C functions
to call neon loopfilters twice.
Using tulip clip, tests showed it gave a ~1.5% decoder speed gain.
Change-Id: Id02638626ac27a4b0e0b09d71792a24c0499bd35
Separate the rounding and right shift operations of forward transform
from those of inverse transform. Take out the assertion check from
inverse transforms. If the transform coefficients were constructed to
cause intermediate steps of inverse transform overflow, the codec will
just let it overflow without breaking the decoding flow.
Change-Id: I73cfc3706c4e840fc543a77cbc4cdb0b05d07730
on arm until we implenment real vp9_idct32x32_34_add_neon.
This issue is due to commit 47665452f0
Merge "Add 32x32 idct function for eob<=34 case".
Change-Id: I56b5f0abc20e7dd1bba521f78a995e85d65ea296
Simplifies the code by implementing band mapping with static arrays.
A lot of the code complexity introduced in a previous patch
disappears.
Change-Id: Ia3fac36e594fb5ad2d55ae141c58bba4c55c2d28
As Jim suggested, 1D array was used to store filter levels instead
of 2D array. This used shift_y in setup_mask directly, and saved
few cycles.
Change-Id: If61ab298784861f1806b1cd396d4e4e2e0f097b9
Implements scan order to band map with arrays in both the encoder
and decoder to remove conditional statements.
Encoding seems to be about 1% faster at speed 0, tested on football.
Decoding seems to be about 0.5-1% faster on a set of 25 videos.
Change-Id: Idb233ca0b9e0efd790e30880642e8717e1c5c8dd
Added loop filter mask checking, and made the caller function
ready for implementation of parallel loopfiltering in horizontal
direction.
Next, we need to go through the loopfilter functions (both c and
optimized versions), and provide 16-byte wide loopfiltering for
each filter type.
Change-Id: Ifef47e7ef9086ebc2fd6ca7ede8f27c9bbf79e66
Make the macroblockd_plane contain dynamic buffer pointers instead
static pointers to the memory space allocated therein. The decoder
uses the buffer allocated in pbi, while encoder will use a dual
buffer approach for rate-distortion optimization search.
Change-Id: Ie6f24be2dcda35df7c15b4014e5ccf236fb3f76c
Inlining set_contexts_on_border() into set_contexts(). The only difference
is the additional check that "has_eob != 0" in addition to
"xd->mb_to_right_edge < 0" and "xd->mb_to_right_edge < 0". If has_eob == 0
then memset does the right thing and works faster.
Change-Id: I5206f767d729f758b14c667592b7034df4837d0e
This patch continued the work done in "Rewrite loop_filter_info_n
struct"(commit:00dbd369c70270428d56da6d15ea5486fc821c52) to further
improve loopfilter function.
1. Instead of storing pointers to thresholds, store loopfilter
levels within 64x64 SB;
2. Since loopfilter levels are already calculated in setup_mask,
we don't need call build_lfi to look up them again. Just save
loopfilter levels in setup_mask.
3. Reorganized and simplified filter_block_plane().
Tests showed a ~0.8% decoder speedup.
Change-Id: I723c7779738bbc2afcb9afa2c6f78580ee6c3af7
SVC multiple layer per frame encoding is invoked with vpx_svc_init and
vpx_svc_encode. These interfaces are designed to be invoked from ffmpeg.
Additional improvements:
- make dummy frame handling a bit more explicit
- fixed bug with single layer encodes
- track individual frame sizes and psnrs instead of averages
- parameterized quantizer, 16th scalefactors, more logging,
- enabled single layer encodes to generate baseline
- include new mode for 3 layer I frame with 5 total layers
Change-Id: I46cfa600d102e208c6af8acd6132e0cc25cda8d4
Removing special case handling from vp9_tree_probs_from_distribution(),
tree_merge_probs(), and vp9_tokens_from_tree_offset() functions. Replacing
inter_mode_offset() function with macro INTER_OFFSET which is used now for
vp9_inter_mode_tree definition.
Change-Id: Iff75a1499d460beb949ece543389c8754deaf178
We only update partition_probs for inter frames but they are constant
for key frames. It is not necessary to have constants inside frame
context and copy them every time. This change reduces FRAME_CONTEXT size
by at least 48 bytes.
Change-Id: If70a53be51043f37fe7d113853217937710932a7
We don't have to calculate 'new' probability in convert_distribution()
because it is enough to calculate only 'new' counters which could be used
to calculate probability if necessary. That's why removing a lot of unused
temporary probability arrays and reducing number of get_binary_prob()
calls.
Change-Id: I4e14eb7203d1ace61bbddefd6b9b6326be83ba63
This CL contains two AVX2 optimized loop filter functions,
mb_lpf_horizontal_edge_w_avx2_8 and mb_lpf_horizontal_edge_w_avx2_16.
Change-Id: I604e4fe6e99752b7800c2ea98721d97f7e0b931b
"<< SUBPEL_BITS" needs to be added in the calculation. Call
set_scaled_offsets() to calculate x_offset_q4 and y_offset_q4.
Change-Id: Ied130ea771510e918f51cd1dc3abe57f4c0962b5
It is enough to check just block type: intra or inter. Intra block implies
intra prediction mode, and inter block implies inter mode.
Change-Id: I3cf98731a3935f670a3cd8e2b2443483eb944be4
replaces use of cur_tile_mi_(row|col)_(start|end) by VP9_COMMON, making
it less stateful and more reusable for parallel tile decoding
Change-Id: I1df09382b4567a0e5f4434825d47c79afe2399be
Restructured the storing of loopfilter information. Deleted
loop_filter_info struct and reduced copying happened in every
superblock.
Tests showed a 0.5% ~ 0.8% decoder speed gain.
Change-Id: Ie6a8e46bae71dc3a3cd8c6054f5de540b8e0ef5e
update_partition_context / partition_plane_context: this will allow for
separate storage to be used in tile decoding
Change-Id: Ie0bc393531ab7e9d2ce35c95111849b294aad4ed
When only upper-left 8x8 area has non-zero dct coefficients, we
could skip 1D IDCT for 9th to 32th rows to save operations. This
function is called when eob <= 34.
Change-Id: I9684b75947bdde346cfe3720f08a953aa7a13fb5
For consistency with idct function names. Renames:
vp9_short_fdct4x4 -> vp9_fdct4x4
vp9_short_walsh4x4 -> vp9_fwht4x4
Change-Id: Id15497cc1270acca626447d846f0ce9199770f58
Assign the pointer to mode_info stream per tile. Remove the use of
tile_col in the decoding modules.
Change-Id: I7df87086708a3d92c5e20e86bcfb04e458ff47a6
The ref's scale_factors are set at frame level, and then copied for
each partition block. Since the struct members are mostly constant,
this patch separated the constant and non-constant members, and
reduced struct copying. This gave 0.5% ~ 1.4% decoder speed gain.
Change-Id: I94043bf5a6995c8042da52e5c661818dfa6f6d4c
This commit uses left_available flag to decide if the left mode_info
struct is available for left_block_mode. As discussed with James
Zern (jzern@), this prevents the codec from fetching mode_info from
blocks in the left tile, which although effectively not used might
present concerns for multi-threaded tile decoding.
This is NOT a bit-stream change.
Change-Id: I1dc8cf1bcbf056688eee27c7bc5706ac4b4e0125
Simple modification to reduce number of cycles in the
function.
Original function number of cycles: 973
Modified function number of cycles: 835
Improvment factor: 1.165
Tested with: park_joy_420_720p50.y4m
Change-Id: Ic5857272ea3aafe21d5ef9a69258d78c688f69bd
This reverts commit a82001b1cf, reversing
changes made to f6d870f7ae.
This commit breaks windows builds and needs some work to fix those and
some additional comments.
Change-Id: Ic0b0228e36704b127e5e399ce59db26182cfffe7
Just making fdct consistent with iht/idct/fht functions which all use
stride (# of elements) as input argument.
Change-Id: I0ba3c52513a5fdd194f1e7e2901092671398985b
We used set_partition_seg_context() only before calls to:
1. update_partition_context()
2. partition_plane_context()
Moving these functions from vp9_blockd.h to vp9_onyxc_int.h and
inlining set_partition_seg_context into them. After that it is not
necessary to have {above, left}_seg_context fields in MACROBLOCKD struture,
so removing them also.
Change-Id: I4723f59e1c8f3788432b7f51185d8d747b3a97f9
Renames for consistency with other constants:
NUM_FRAME_TYPES -> FRAME_TYPES
NUM_PARTITION_CONTEXTS -> PARTITION_CONTEXTS
Change-Id: I3db30acb2868eb0a424237c831087b2e264ec47f
This patch fixed a bug that caused 32bit PIC build mismatch. The
stack pointer was modified after "GET_GOT". Loading left pointer
from a hard-coded position gave wrong result.
Change-Id: Iea0aec6f917b12a6b3393ffc986bad74510248cc
Commit "d207 intra prediction ssse3 using bytes" caused mismatch
while building 32bit PIC code. Disabled these SSSE3 functions
until we fix the bug.
Change-Id: Ic444e531d3d4058092fe6eab09006b44fcb18e4c
