SVC multiple layer per frame encoding is invoked with vpx_svc_init and
vpx_svc_encode. These interfaces are designed to be invoked from ffmpeg.
Additional improvements:
- make dummy frame handling a bit more explicit
- fixed bug with single layer encodes
- track individual frame sizes and psnrs instead of averages
- parameterized quantizer, 16th scalefactors, more logging,
- enabled single layer encodes to generate baseline
- include new mode for 3 layer I frame with 5 total layers
Change-Id: I46cfa600d102e208c6af8acd6132e0cc25cda8d4
Removing special case handling from vp9_tree_probs_from_distribution(),
tree_merge_probs(), and vp9_tokens_from_tree_offset() functions. Replacing
inter_mode_offset() function with macro INTER_OFFSET which is used now for
vp9_inter_mode_tree definition.
Change-Id: Iff75a1499d460beb949ece543389c8754deaf178
Removes stack-alocation of token_cache in decode_coefs function
Seems to achieve about 1% decode speed improvement as tested on
25 480p videos.
Change-Id: I8e7eb3361fa09d9654dfad0677a6d606701fdc6e
The compound inter prediction could potentially run with initial
motion vectors of invalid value and check the mv_cost, which triggers
overheap read. This commit resolves this issue by forcing a motion
vector value check for compound inter modes of both superblock and
sub8x8 block sizes.
Change-Id: I4f4fc19ce83c8272782bc382f12c82a3f03212fc
We only update partition_probs for inter frames but they are constant
for key frames. It is not necessary to have constants inside frame
context and copy them every time. This change reduces FRAME_CONTEXT size
by at least 48 bytes.
Change-Id: If70a53be51043f37fe7d113853217937710932a7
Removed:
goldfreq, avg_encode_time, avg_pick_mode_time,
cpu_freq, interquantizer
member variables from VP9_COMP since they are no longer
used in the code.
Change-Id: I010a82c217d0da03c3f53d1858d3462190c12dcf
Removed three members from the VP9_COMP data structure:
inter_zz_count, gf_bad_count, gf_update_recommended.
These were part of the VP8 real-time mode implementation
that was removed from the initial VP9 codecbase.
Change-Id: I866b083b88ef02c74837277d50ce532ca88492f3
This commit fixes the use case of plane_block_idx, which determines
the plane (Y/U/V) index based on block index. When block idx >= 4 in
sub8x8 block loop, it should be of chroma components.
Change-Id: I072705aa7b35445524ac607089ca8ce54b7ba478
We don't have to calculate 'new' probability in convert_distribution()
because it is enough to calculate only 'new' counters which could be used
to calculate probability if necessary. That's why removing a lot of unused
temporary probability arrays and reducing number of get_binary_prob()
calls.
Change-Id: I4e14eb7203d1ace61bbddefd6b9b6326be83ba63
1. Reduced the size memset based on eob for 32x32 transform. The reset
of non-zero coefficient should probably go into where they are read in
inverse transform functions. (TODO)
2. Removed a redundant level of indirection.
vp9_iht4x4_add() checks transform type and call vp9_iht4x4_16_add()
for tranforms other than DCT_DCT. In this case, the DCT_DCT case
has been already handled here.
Change-Id: Iacbc77da761f0b308df5acea0f20c9add9f33d20
The change doesn't affect the bitstream. It changes the order or function
calls and affects how we reconstruct intra- and inter-blocks. Speed up is
about 1...1.5%.
For intra-blocks:
Before:
for each transform block read tokens
for each transform block do prediction
for each transform block do inverse transform
Now:
for each transform block
read tokens
do prediction
do inverse transform
For inter-blocks:
Before:
for each transform block read tokens
for each transform block do inverse transform
Now:
for each transform block
read tokens
do inverse transform
Change-Id: I12a79bf1aa5a18c351b8010369bd3ff1deae1570
This CL contains two AVX2 optimized loop filter functions,
mb_lpf_horizontal_edge_w_avx2_8 and mb_lpf_horizontal_edge_w_avx2_16.
Change-Id: I604e4fe6e99752b7800c2ea98721d97f7e0b931b
-Don't reduce maxQ for gold/alt in CBR mode.
-Fix to min/maxQ for first/initial key frame.
-Add more speeds to datarate test and reduce the starting bitrate for test.
Change-Id: Id2a333d76dd3f6a51b322ca984588e2a22159c58
This commit makes zcoeff_blk cache the case where the entire block
is quantized to be zero (without applying zero-forcing) in the rate-
distortion optimization loop, and skip the forward DCT, quantization,
inverse DCT, and reconstruction process in the encode_block stage.
It now works for all the block sizes, including sub8x8 blocks.
Change-Id: I5ae60a9c436ba3637d11666733554bec4580ef98
Both decode_modes_sb and decode_modes_b had conditions to immediately
return at the beginning. Eliminating these conditions here and calling
these functions only to do a real work. Also unrolling loop for
PARTITION_SPLIT.
Change-Id: I2fc41cb74ac491f045a2f04fe68d30ff4aaa555d
"<< SUBPEL_BITS" needs to be added in the calculation. Call
set_scaled_offsets() to calculate x_offset_q4 and y_offset_q4.
Change-Id: Ied130ea771510e918f51cd1dc3abe57f4c0962b5
factorizes the code in decode_tiles(). reading the offsets backwards
wasn't doing anything to prove tile independence
Change-Id: I0395d3c77205852ebdc55efedc68291e93cef85c
Warning was: "implicit conversion from enumeration type 'VPX_SCALING_MODE'
(aka 'enum vpx_scaling_mode_1d') to different enumeration type
'VPX_SCALING'".
Change-Id: I45689e439a8775bc1e7534d0ea1ff7c729f2c7f5
"keyframe" variable in the current code actually means that previous
frame is a keyframe because cm->frame_type has not been initialized
in read_uncompressed_header.
Change-Id: I5645b0816c70abdef5dfc70113018d06276dac77
It is enough to check just block type: intra or inter. Intra block implies
intra prediction mode, and inter block implies inter mode.
Change-Id: I3cf98731a3935f670a3cd8e2b2443483eb944be4
replaces use of cur_tile_mi_(row|col)_(start|end) by VP9_COMMON, making
it less stateful and more reusable for parallel tile decoding
Change-Id: I1df09382b4567a0e5f4434825d47c79afe2399be
Adding these functions to encapsulate tx_type check. Changing TX_TYPE to
int to match the declaration in vo9_rtch.h.
Change-Id: I6f3a2df6e35595ca73b6aaa9e3909ee7bc3fd16f
Restructured the storing of loopfilter information. Deleted
loop_filter_info struct and reduced copying happened in every
superblock.
Tests showed a 0.5% ~ 0.8% decoder speed gain.
Change-Id: Ie6a8e46bae71dc3a3cd8c6054f5de540b8e0ef5e
update_partition_context / partition_plane_context: this will allow for
separate storage to be used in tile decoding
Change-Id: Ie0bc393531ab7e9d2ce35c95111849b294aad4ed
When only upper-left 8x8 area has non-zero dct coefficients, we
could skip 1D IDCT for 9th to 32th rows to save operations. This
function is called when eob <= 34.
Change-Id: I9684b75947bdde346cfe3720f08a953aa7a13fb5
set_active_map()
set_roi_map()
The APIs need be implemented and tested later, to insure consistency
with VP9 codec internals
Change-Id: I198124ee318f0883b58d1d36cea3c7ccd742a57e
For consistency with idct function names. Renames:
vp9_short_fdct4x4 -> vp9_fdct4x4
vp9_short_walsh4x4 -> vp9_fwht4x4
Change-Id: Id15497cc1270acca626447d846f0ce9199770f58
Splitting setup_inter_inter function into is_compound_prediction_allowed
and setup_compound_prediction. Moving setup_compound_prediction call
into read_comp_pred from read_uncompressed_header.
We should do the same in the encoder as well.
Change-Id: I40d75fdc4a221b2f7705df00d23a4b3fe79987c3
The encode_block for pass 1 takes simpler functionalities and can
save a few branches. The main reason is to make encode_block only
used after running rate-distortion optimization search in pass 2,
hence allowing dual buffer stack approach later.
Change-Id: I9e549ffb758e554fe185e48a07d6e0e01e475bcf
Use a flag variable to determine if coded in inter mode, thus avoiding
multiple inter mode checks in super_block_yrd.
Change-Id: I0ef998b2811c38e185a2e0583f0f636cee45d2cf
Assign the pointer to mode_info stream per tile. Remove the use of
tile_col in the decoding modules.
Change-Id: I7df87086708a3d92c5e20e86bcfb04e458ff47a6
This move is done to have all compressed header reading functions in one
place. Moved functions:
read_switchable_interp_probs
read_inter_mode_probs
read_comp_pred_mode
read_comp_pred
update_mv
read_mv_probs
Change-Id: I2aebb57d2826d03d11bf2f8fbbfc3a9978c4f9fb
The ref's scale_factors are set at frame level, and then copied for
each partition block. Since the struct members are mostly constant,
this patch separated the constant and non-constant members, and
reduced struct copying. This gave 0.5% ~ 1.4% decoder speed gain.
Change-Id: I94043bf5a6995c8042da52e5c661818dfa6f6d4c
The pointer was asigned only once with vp9_regular_quantize_b_4x4, calling
this function directly now. Also removing unused declarations:
prototype_quantize_block
prototype_quantize_block_pair
prototype_quantize_mb
vp9_regular_quantize_b_4x4_pair
vp9_regular_quantize_b_8x8
Change-Id: I14325bc2f082336820671eafbc06126651b79f73
This commit uses left_available flag to decide if the left mode_info
struct is available for left_block_mode. As discussed with James
Zern (jzern@), this prevents the codec from fetching mode_info from
blocks in the left tile, which although effectively not used might
present concerns for multi-threaded tile decoding.
This is NOT a bit-stream change.
Change-Id: I1dc8cf1bcbf056688eee27c7bc5706ac4b4e0125
Simple modification to reduce number of cycles in the
function.
Original function number of cycles: 973
Modified function number of cycles: 835
Improvment factor: 1.165
Tested with: park_joy_420_720p50.y4m
Change-Id: Ic5857272ea3aafe21d5ef9a69258d78c688f69bd
This reverts commit a82001b1cf, reversing
changes made to f6d870f7ae.
This commit breaks windows builds and needs some work to fix those and
some additional comments.
Change-Id: Ic0b0228e36704b127e5e399ce59db26182cfffe7
Just making fdct consistent with iht/idct/fht functions which all use
stride (# of elements) as input argument.
Change-Id: I0ba3c52513a5fdd194f1e7e2901092671398985b
We used set_partition_seg_context() only before calls to:
1. update_partition_context()
2. partition_plane_context()
Moving these functions from vp9_blockd.h to vp9_onyxc_int.h and
inlining set_partition_seg_context into them. After that it is not
necessary to have {above, left}_seg_context fields in MACROBLOCKD struture,
so removing them also.
Change-Id: I4723f59e1c8f3788432b7f51185d8d747b3a97f9
missed one in vp9_detokenize.c in the last
+ add some asserts in vp9_decode_frame() to catch regressions
Change-Id: Ide67505114ee17efdafb13694aed0c09039e5a16
replace VP9D_COMP usage with the (slightly) more targeted
VP9_COMMON/MACROBLCKD/struct segmentation structures.
Change-Id: Iabb3616e231417b0e17b7e4b384ea63167a81745
This 2-pass rate control setting allocates bits based
on first pass stats to each kf group, gf group and individual
frame but does not correct the bits left and allocation after
each frame.
In other words it recommends a bit allocation for each frame
but does not try and correct any over or under spend on a
frame over the remainder of the clip. This reduces the accuracy
of rate control in terms of hitting an average bitrate but prevents
problems that may arise because early frames either use to many
or too few bits. This mode is currently more inclined to undershoot
than overshoot (particularly at higher data rates).
Also minor changes to rate of adaption when recode loop is not
enabled.
This mode is currently enabled by default for VBR.
It gives the following % performance gains.
derf +0.467, +1.072
yt 2.962, 2.645
stdhd 1.682, 1.595,
yt-hd 2.3, 2.174
Change-Id: I3c84a9bf8884e5b345698ff0e19187f792c2f3a0
Delta reduced because of concern about popping on some
very hard clips.
Also allow some frame recode at speed 2 for kf/gf/arf.
Change-Id: Ib47dff42da41aa6eec83b7285fcaaca24abb851e
Renames for consistency with other constants:
NUM_FRAME_TYPES -> FRAME_TYPES
NUM_PARTITION_CONTEXTS -> PARTITION_CONTEXTS
Change-Id: I3db30acb2868eb0a424237c831087b2e264ec47f
This patch fixed a bug that caused 32bit PIC build mismatch. The
stack pointer was modified after "GET_GOT". Loading left pointer
from a hard-coded position gave wrong result.
Change-Id: Iea0aec6f917b12a6b3393ffc986bad74510248cc
Commit "d207 intra prediction ssse3 using bytes" caused mismatch
while building 32bit PIC code. Disabled these SSSE3 functions
until we fix the bug.
Change-Id: Ic444e531d3d4058092fe6eab09006b44fcb18e4c
This commit makes the buffer allocation of zcoeff_blk array in
pick_mode_context block size aware. It calculates the number of
4x4 blocks in the partition and assigns the memory space accordingly.
This process (and the uninitialization) is done once for each encoding
pass. It allows memory copy of smaller buffer when possible.
For football at 600kbps, the runtimes improve by about 1%:
speed 1, 45961ms -> 45472ms
speed 2, 23863ms -> 23598ms
Change-Id: Id2ca24906fa89f46fa5fe742ec4b8efc2a61f877
in most cases at least the left column was a harmless race as it was
left unused later in the code.
Change-Id: I43211df66fb157c6feecf08c681add4fcf18b644
Just making fdct consistent with iht/idct/fht functions which all use
stride (# of elements) as input argument.
Change-Id: Ibc944952a192e6c7b2b6a869ec2894c01da82ed1
Just making fdct consistent with iht/idct/fht functions which all use
stride (# of elements) as input argument.
Change-Id: I2d95fdcbba96aaa0ed24a80870cb38f53487a97d
That makes decoder and encoder (only bitstream writing part) a little bit
simpler and faster. Moving get_sb_index() function to the encoder.
Change-Id: Ie91aaeefd69c84b085948267b33556a7666c6278
