update_partition_context / partition_plane_context: this will allow for
separate storage to be used in tile decoding
Change-Id: Ie0bc393531ab7e9d2ce35c95111849b294aad4ed
When only upper-left 8x8 area has non-zero dct coefficients, we
could skip 1D IDCT for 9th to 32th rows to save operations. This
function is called when eob <= 34.
Change-Id: I9684b75947bdde346cfe3720f08a953aa7a13fb5
set_active_map()
set_roi_map()
The APIs need be implemented and tested later, to insure consistency
with VP9 codec internals
Change-Id: I198124ee318f0883b58d1d36cea3c7ccd742a57e
For consistency with idct function names. Renames:
vp9_short_fdct4x4 -> vp9_fdct4x4
vp9_short_walsh4x4 -> vp9_fwht4x4
Change-Id: Id15497cc1270acca626447d846f0ce9199770f58
Splitting setup_inter_inter function into is_compound_prediction_allowed
and setup_compound_prediction. Moving setup_compound_prediction call
into read_comp_pred from read_uncompressed_header.
We should do the same in the encoder as well.
Change-Id: I40d75fdc4a221b2f7705df00d23a4b3fe79987c3
The encode_block for pass 1 takes simpler functionalities and can
save a few branches. The main reason is to make encode_block only
used after running rate-distortion optimization search in pass 2,
hence allowing dual buffer stack approach later.
Change-Id: I9e549ffb758e554fe185e48a07d6e0e01e475bcf
Use a flag variable to determine if coded in inter mode, thus avoiding
multiple inter mode checks in super_block_yrd.
Change-Id: I0ef998b2811c38e185a2e0583f0f636cee45d2cf
Assign the pointer to mode_info stream per tile. Remove the use of
tile_col in the decoding modules.
Change-Id: I7df87086708a3d92c5e20e86bcfb04e458ff47a6
This move is done to have all compressed header reading functions in one
place. Moved functions:
read_switchable_interp_probs
read_inter_mode_probs
read_comp_pred_mode
read_comp_pred
update_mv
read_mv_probs
Change-Id: I2aebb57d2826d03d11bf2f8fbbfc3a9978c4f9fb
The ref's scale_factors are set at frame level, and then copied for
each partition block. Since the struct members are mostly constant,
this patch separated the constant and non-constant members, and
reduced struct copying. This gave 0.5% ~ 1.4% decoder speed gain.
Change-Id: I94043bf5a6995c8042da52e5c661818dfa6f6d4c
The pointer was asigned only once with vp9_regular_quantize_b_4x4, calling
this function directly now. Also removing unused declarations:
prototype_quantize_block
prototype_quantize_block_pair
prototype_quantize_mb
vp9_regular_quantize_b_4x4_pair
vp9_regular_quantize_b_8x8
Change-Id: I14325bc2f082336820671eafbc06126651b79f73
This commit uses left_available flag to decide if the left mode_info
struct is available for left_block_mode. As discussed with James
Zern (jzern@), this prevents the codec from fetching mode_info from
blocks in the left tile, which although effectively not used might
present concerns for multi-threaded tile decoding.
This is NOT a bit-stream change.
Change-Id: I1dc8cf1bcbf056688eee27c7bc5706ac4b4e0125
Simple modification to reduce number of cycles in the
function.
Original function number of cycles: 973
Modified function number of cycles: 835
Improvment factor: 1.165
Tested with: park_joy_420_720p50.y4m
Change-Id: Ic5857272ea3aafe21d5ef9a69258d78c688f69bd
This reverts commit a82001b1cf, reversing
changes made to f6d870f7ae.
This commit breaks windows builds and needs some work to fix those and
some additional comments.
Change-Id: Ic0b0228e36704b127e5e399ce59db26182cfffe7
Just making fdct consistent with iht/idct/fht functions which all use
stride (# of elements) as input argument.
Change-Id: I0ba3c52513a5fdd194f1e7e2901092671398985b
We used set_partition_seg_context() only before calls to:
1. update_partition_context()
2. partition_plane_context()
Moving these functions from vp9_blockd.h to vp9_onyxc_int.h and
inlining set_partition_seg_context into them. After that it is not
necessary to have {above, left}_seg_context fields in MACROBLOCKD struture,
so removing them also.
Change-Id: I4723f59e1c8f3788432b7f51185d8d747b3a97f9
missed one in vp9_detokenize.c in the last
+ add some asserts in vp9_decode_frame() to catch regressions
Change-Id: Ide67505114ee17efdafb13694aed0c09039e5a16
replace VP9D_COMP usage with the (slightly) more targeted
VP9_COMMON/MACROBLCKD/struct segmentation structures.
Change-Id: Iabb3616e231417b0e17b7e4b384ea63167a81745
This 2-pass rate control setting allocates bits based
on first pass stats to each kf group, gf group and individual
frame but does not correct the bits left and allocation after
each frame.
In other words it recommends a bit allocation for each frame
but does not try and correct any over or under spend on a
frame over the remainder of the clip. This reduces the accuracy
of rate control in terms of hitting an average bitrate but prevents
problems that may arise because early frames either use to many
or too few bits. This mode is currently more inclined to undershoot
than overshoot (particularly at higher data rates).
Also minor changes to rate of adaption when recode loop is not
enabled.
This mode is currently enabled by default for VBR.
It gives the following % performance gains.
derf +0.467, +1.072
yt 2.962, 2.645
stdhd 1.682, 1.595,
yt-hd 2.3, 2.174
Change-Id: I3c84a9bf8884e5b345698ff0e19187f792c2f3a0
Delta reduced because of concern about popping on some
very hard clips.
Also allow some frame recode at speed 2 for kf/gf/arf.
Change-Id: Ib47dff42da41aa6eec83b7285fcaaca24abb851e
Renames for consistency with other constants:
NUM_FRAME_TYPES -> FRAME_TYPES
NUM_PARTITION_CONTEXTS -> PARTITION_CONTEXTS
Change-Id: I3db30acb2868eb0a424237c831087b2e264ec47f
This patch fixed a bug that caused 32bit PIC build mismatch. The
stack pointer was modified after "GET_GOT". Loading left pointer
from a hard-coded position gave wrong result.
Change-Id: Iea0aec6f917b12a6b3393ffc986bad74510248cc
Commit "d207 intra prediction ssse3 using bytes" caused mismatch
while building 32bit PIC code. Disabled these SSSE3 functions
until we fix the bug.
Change-Id: Ic444e531d3d4058092fe6eab09006b44fcb18e4c
This commit makes the buffer allocation of zcoeff_blk array in
pick_mode_context block size aware. It calculates the number of
4x4 blocks in the partition and assigns the memory space accordingly.
This process (and the uninitialization) is done once for each encoding
pass. It allows memory copy of smaller buffer when possible.
For football at 600kbps, the runtimes improve by about 1%:
speed 1, 45961ms -> 45472ms
speed 2, 23863ms -> 23598ms
Change-Id: Id2ca24906fa89f46fa5fe742ec4b8efc2a61f877
in most cases at least the left column was a harmless race as it was
left unused later in the code.
Change-Id: I43211df66fb157c6feecf08c681add4fcf18b644
Just making fdct consistent with iht/idct/fht functions which all use
stride (# of elements) as input argument.
Change-Id: Ibc944952a192e6c7b2b6a869ec2894c01da82ed1
Just making fdct consistent with iht/idct/fht functions which all use
stride (# of elements) as input argument.
Change-Id: I2d95fdcbba96aaa0ed24a80870cb38f53487a97d
That makes decoder and encoder (only bitstream writing part) a little bit
simpler and faster. Moving get_sb_index() function to the encoder.
Change-Id: Ie91aaeefd69c84b085948267b33556a7666c6278
Making this change in order to move allow_high_precision_mv field
from MACROBLOCKD structure to VP9_COMMON (because it is a frame level
flag).
Change-Id: I1d006ba36d938e0caf4d40fa051e2e38df9c1108
Just making fdct consistent with iht/idct/fht functions which all use
stride (# of elements) as input argument.
Change-Id: Id623c5113262655fa50f7c9d6cec9a91fcb20bb4
cherry-picked from:
commit 988b70844e03efcfcc075a9bc25d846670494f36
Author: Pascal Massimino <pascal.massimino@gmail.com>
Date: Fri Aug 2 11:15:16 2013 -0700
add WebPWorkerExecute() for convenient bypass
This is mainly for re-using the worker structs without using the
thread.
Change-Id: I8e1be29e53874ef425b15c192fb68036b4c0a359
Original source:
http://git.chromium.org/webm/libwebp.git
100644 blob c0d318aee628fdf9ba4876451a28aa978f1066b8 src/utils/thread.c
100644 blob c2b92c9fe353f8e514f78922f3d237204a9cbc66 src/utils/thread.h
Change-Id: I13fe92b1e94062bb99fdeeb7cb0b4b0575d27793
* changes:
Use a separate MODE_INFO stream for each tile column
Get rid of "this_mi", use "mi_8x8[0]" everywhere instead
Make the static_segmentation feature work again
The only case where they were intentionally pointing to different
structures was in mbgraph, and this didn't have the expected behavior
because both of these pointers are used interchangeably through the code
Change-Id: I979251782f90885fe962305bcc845bc05907f80c
Moving code that gets band_translate array from get_scan_and_band()
function to get_band_translate() function. Renaming get_scan_and_band() to
get_scan().
Change-Id: I43047c205a1ca2a6e24be44db39dc04b7a385008
This should be similar to what x264 does with --aq-mode 1.
It works well with clips like parkjoy and touhou
(http://x264.nl/developers/Dark_Shikari/LosslessTouhou.mkv).
At low bitrates, the segmentation signaling overhead may negate the
benefits of this feature.
(PGW) Default changed to feature OFF to allow provisional merge.
Change-Id: I938abf9bb487e1d4ad3b0264ea03d9826275c70b
Updated the encoder to handle frames that are coded
intra-only. Intra-only frames must be non-showable,
that is, the "show frame" flag must be set to 0 in
the frame header.
Tested by forcing the ARF frames to be coded intra-
only.
Note: The rate control code will need to be modified
to account for intra-only frames better than they
are currently handled.
Change-Id: I6a9dd5337deddcecc599d3a44a7431909ed21079
Remove the semicolon in the definition of vp9_zero macro. Make all
the use cases of vp9_zero of consistent format.
Change-Id: Ibaf9751e8595872b12766381a93d185a4d90df8f
The commit added check to make sure no invalid memory access even when
the decoder instance is never initialized.
Change-Id: I4da343d0b3c78c27777ac7f5ce7688562c69f0c5
For bad input data, the decoder may access the array out of bounds. The
commit added clamp to prevent such out of bound access
Change-Id: I0a1cfd9b8786ea7113a998053c76605c963b077a
Use the zcoeff_blk buffer of PICK_MODE_CONTEXT to store the indexes
of all-zero-coeff block of the current best mode. Remove the temporary
buffer best_zcoeff_blk defined in the rate-distortion optimization
loop. This improves the speed performance by about 0.5% in all speed
settings.
Change-Id: Ie3e15988ddfa581eafa2e19a8228d3fe4a46095c
This commit moves token_cache buffer into macroblock struct, instead
of defining as a local variable in cost_coeffs. This avoids repeatedly
re-allocating memory space in the rate-distortion optimization loop.
The runtime at speed 0 reduces:
bus 2000kbps, 161692ms to 159951ms
football 600kbps, 229505ms to 225821ms
Change-Id: If7da6b0b6d8c5138a16271a33c4548fba33d8840
Using TREE_SIZE for the following trees:
vp9_intra_mode_tree
vp9_inter_mode_tree
vp9_partition_tree
vp9_switchable_interp_tree
vp9_mv_joint_tree
vp9_mv_class_tree
vp9_mv_class0_tree
vp9_mv_fp_tree
Change-Id: I0212bb4c1ee6648249f68517e28a67a56591ee1b
Values of MODE_UPDATE_PROB and VP9_COEF_UPDATE_PROB are equal, so replacing
them with one constant. Inlining appropriate arguments for functions:
vp9_cond_prob_diff_update (encoder)
vp9_diff_update_prob (decoder)
Change-Id: I1255a1cb477743b799b3bfbbcd8de6b32b067338
Converts the constant rddiv parameter to 128 (from 100) and
implements RDCOST with bit-shift rather than multiplication.
Other parameters are also adjusted to roughly keep the same
balance between Rate and Distortion.
There is a slight speed-up of about 0.5-1% (at speed 0) as
testted on football_cif.
There is a slight change in performance due to small change
in the parameters.
derfraw300: +0.033%
stdhdraw250; +0.102%
Change-Id: I70ac69f58fa71c83108f68fe41796cd19d1fc760
The commit changes to mask available intra prediction modes for test
based on prediction block size.
With this patch, encoding time of CpuUsed 2 reduces from 10% to 20% for
HD clips with a compression drop of 0.2%
Change-Id: I65f320f1237c0f5ae3a355bf7caf447f55625455
When the codec in VBR (or cq) mode hits its max q limits and is
struggling to hit a target bandwidth, the bit target per frame collapses.
In the first instance normal frames cap out at the maximum allowed
Q and then the ARF and GFs do the same. This latter behavior is not
generally desirable as GFs and ARFs are only effective from a quality
and data rate perspective if they have at lease some level of -Q delta
compared to the surrounding frames.
In this patch I define a separate max Q for GFs and ARFs that is
derived from but somewhat lower than that defined for normal frames.
In effect there is a minimum Q delta that will always be available for
GFs and ARFs regardless of the target rate and MAXQ setting.
This may of course mean that the absolute lowest rate obtainable for
a given clip is somewhat higher.
Change-Id: I268868b28401900d0cd87e51e609cd3b784ab54a
We have two SSE2-optimized functions for idct4_1d:
vp9_idct4_1d_sse2 <-- removing this one
idct4_1d_sse2
vp9_idct4_1d_sse2 was used only by the following functions which already
have SSE2 optimized variants:
vp9_idct4x4_16_add_c -> vp9_idct4x4_16_add_see2
idct8_1d -> vp9_idct8x8_{16, 10, 1}_see2
vp9_short_iht4x4_add_c -> vp9_short_iht4x4_add_see2
Change-Id: Ib0a7f6d1373dbaf7a4a41208cd9d0671fdf15edb
To ensure fast encoding/decoding on devices without ssse3 support,
SSE2 optimization of sub-pixel filters was done. Test using 1080p
clip showed the decoder speeds were ~70fps with ssse3 filters, ~60fps
with sse2 filters, and ~15fps with c filters.
Change-Id: Ie2088f87d83a889fba80a613e4d0e287aadd785c
Renames:
fdct4_1d -> fdct4
fadst4_1d -> fadst4
fdct8_1d -> fdct8
fadst8_1d -> fadst8
fdct16_1d -> fdct16
fadst16_1d -> fadst16
"_1d" suffix is redundant, so removing it. The same will happen with idct
in the next change sets.
Change-Id: Ibf421cd2f569146c6079269df7a31819c098265e
This commit re-designs the per transformed block rate-distortion
costs tracking buffers. It removes redundant buffer usage, makes
the needed context memory allocation per VP9_COMP instance and
reuses the same buffer sets inside the rate-distortion optimization
search loop, thereby avoiding repeatedly requiring memory space.
It reduces speed 0 runtime:
bus at 2000 kbps from 166763ms to 158967ms,
football at 600 kbps from 246614ms to 234257ms.
Both about 5% speed-up. Local tests suggest about 2% to 5% speed-up
for speed 1 and 2 settings. This does not change compression
performance.
Change-Id: I363514c5276b5cf9a38c7251088ffc6ab7f9a4c3
Increases these parameters.
There is a small efficiency gain.
Change-Id: Ie5f0ddb39c907d335e0dafa5eb112365a81f4542
derfraw300: +0.091%
stdhdraw250: +0.238%
The intra mode distortion adjustment for skip_encode feature was
broken in the refactoring cc91851. This commit fixes it and tunes
the distortion models used therein.
Change-Id: I0d676e82f8e855536a90cf9b3e3fdefafcd886c6
snprintf is not supported by MSVC, the commit replace it with the msvc
variant _snprintf to enable build.
Change-Id: I686943a78c289bae6b486a5e75effad5f86c24de
Use b_mode_info to store the inter prediction mode of sub8x8 block,
in replacement of the use of partition_info. Remove redundant buffer
update for partition_info. For bus_cif at 2000 kbps, this seem to make
speed 0 about 1% faster.
Change-Id: Id1b3be45e75a24fb4b42335ac480c23e440978f6
When all coefficients are zeros, skip the corresponding 1-D inverse
transform. This practice has been used in the SSE2 implementation of
inverse 32x32 DCT. This commit imports this algorithm into the C code.
Change-Id: I0f58bfcb183a569fab85d524d5d9cf8ae8653f86
We already have itxm_add member in MACROBLOCKD structure. Both
inv_txm4x4_1_add and inv_txm4x4_add are just its special cases for
different eob values. But eob logic is already implemented in
vp9_iwht4x4_add and vp9_idct4x4_add (that's why also removing
inverse_transform_b_4x4_add).
Change-Id: I80bec9b6f7d40c5e5033c613faca5c819c3e6326
For CpuUsed 1 & 2, this commit allow to skip retangular partition check
when NONE is better than SPLIT. It also changed to allow such logic
on alt ref frame coding rather than use square partition all them. The
change has gain compressio about .3% on yt and ythd for both 1&2, It
helped .6% compression on cif and stdhd for both CpuUsed 1&2.
Change-Id: I814b653baf89f59acd20e042629a12938a1bd4e5
Now we have entropy code separate from scan/iscan code. The next step
in future is to move iscan code from common part to the encoder.
Change-Id: Id9732f7d80aec00af35c1d58d1137c4c96c91451
A new set of MSVC warnings were introduced by change
I3f36d3f7cd8d15195a6e2fafd1777cdaf9ecb847
In particular MSVC does not like:-
typedef const int16_t subpel_kernel[SUBPEL_TAPS];
struct subpix_fn_table {
const subpel_kernel *filter_x;
const subpel_kernel *filter_y;
};
causes new warning in MSVC.
warning C4114: same type qualifier used more than once
Change-Id: Iae596fd13aadf36169faf00c68eabe9a32a9b156
This commit allows sub8x8 intra modes test in the rate-distortion
loop for hd sequences in speed 1 and 2.
For sequence y90n of hd set at 8000 kbps, speed 2 runtime goes
from 207s to 210s. For ped_1080p at 3000 kbps, speed 2 runtim goes
from 336s to 337s. Both are running with 300 frames.
This improves compression performance by 0.24% for stdhd and 0.32%
for hd.
Change-Id: I173ca38a6411565ae6cfadd184c42b2070c5de1f
The idea is to have the following names for each transform size:
vp9_idct4x4_add
vp9_idct4x4_1_add
vp9_idct4x4_10_add
vp9_idct4x4_16_add
vp9_idct8x8_add
vp9_idct8x8_1_add
vp9_idct8x8_10_add
vp9_idct8x8_64_add
etc for 16x16, 32x32
The actual list of renames in this patch:
vp9_idct_add_lossless -> vp9_iwht4x4_add
vp9_short_iwalsh4x4_add -> vp9_iwht4x4_16_add
vp9_short_iwalsh4x4_1_add -> vp9_iwht4x4_1_add
vp9_idct_add -> vp9_idct4x4_add
vp9_short_idct4x4_add -> vp9_idct4x4_16_add
vp9_short_idct4x4_1_add -> vp9_idct4x4_1_add
Change-Id: I6f43f7437c68dd30cdd05d72e213765578ed30b1
