Re-factor duplicate code.
Add two pass check for use of section_intra_rating as
it is un-initialised in the 1 pass and rt case.
Change-Id: I93120796f07961b8a21fb26e1a9f0d3d13949994
One of a series of changes to clean up two pass
allocation as precursor to support for multiple arf
or boosted frames per GF/ARF group.
This change pulls out the calculation of the total bits
allocated to a GF/ARF group into a function, to aid
readability and reduce the line count for define_gf_group().
This change should have no material impact on output.
Change-Id: I716fba08e26f9ddde3257e7d9b188453791883a3
This commit enables a chessboard pattern for partition search. All
the black blocks run regular partition search ranging from 8x8 to
32x32. The rest white blocks take the nearby blocks' information
to adaptively decide the effective search range.
The compression performance for rtc set at speed -5 is down by 1.5%.
For pedestrian 1080p at speed -5, the runtime goes from 41594 ms to
39697 ms, i.e., about 5% faster.
Change-Id: Ia4b96e237abfaada487c743bca08fe1afd298685
tx_mode supercedes whatever mechanism is used to push for 16x16
allowing for the use of the 4x4 transform.
Change-Id: I6c3f05ab9fe52050e40cc6303de9334653763289
vp9_is_upper_layer_key_frame() definition does not match declaration--
it was missing the second const.
Change-Id: I71312579eb443be1924b8b06d8b3177c3dcb40f3
Merged minq tables for arf and gf cases.
These tables were almost the same and for
VBR the arf table was not used at all.
Change-Id: Ie3c87e91dab613cf06f6945ac1ace0e0e4213d34
Small adjustment to the active Q range calculations.
These changes should slightly extend the available Q range
for KF/GF/ARF and narrow it for other frames.
The results for this change in isolation are broadly positive
for SSIM and average PSNR and slightly up but mixed for opsnr.
derf +0.293% opsnr, +1.286% SSIM
std-hd + 0.528% opsnr, + 1.746% SSIM
yt +0.056% opsnr, +0.457% SSIM
yt-hd -0.147% opsnr, + 0.226% SSIM
Change-Id: If065280342027ecc5d44b49fc1d440dfef041002
Includes changes that are not compatible with VS windows builds.
Amongst other things stdint.h is not supported in VS.
This reverts commit 89fbf3de50.
Change-Id: Ifa86d7df250578d1ada9b539c9ff12ed0c523cdd
When the variance is far less than sse, the block is considered to
be under light change. All the energy is compacted into DC coeff
and can be coded at low cost. In such situation, switch the rate-
distortion modeling from sse+var based back to variance based.
Note that this is a temporary solution to handle the rare situations
where the scene light changes.
Change-Id: I1ee0fe2b9eda6b5fac40152e1841bf23f4d229fd
The rounding of the ARNR filter output prior to
normalization by the filter strength was incorrect
when strength = 0.
In this case 1 << (strength - 1) would not create the
required rounding of 0, rather it would outrange. This
patch fixes this issue.
Change-Id: I771809ba34d6052b17d34c870ea11ff67b418dab
This commit enables SSSE3 version full inverse 8x8 2D-DCT and
reconstruction. It makes the runtime of vp9_idct8x8_64_add down
from 256 cycles (SSE2) to 246 cycles.
Change-Id: I0600feac894d6a443a3c9d18daf34156d4e225c3
When ARNR filtering is disabled, by setting
arnr_max_frames=0, mode_skip_mask was being set to
-1 for the ARF frame resulting in no mode being
selected for the block.
The intent is to restrict the reference frame to the
previous ARF frame and the mode to one of ZEROMV,
NEARMV or NEARESTMV.
Change-Id: Ifc3920b153142cd01d422910c94d2f20ffb6f129
On balance Deb's modified rate control for VBR seems
to be outperforming especially on some low motion YT
clips so I have switched this to be the default mode for
now.
Change-Id: I0713d430cad6425ac5c48fccdf332e12814ee44a
Assembly implementation of ssse3 8x8 forward 2D-DCT. The current
version is turned on only for x86_64. The average unit runtime
goes from 157 cycles down to 136 cycles, i.e., about 12.8% faster.
This translates into about 1.5% speed-up for pedestrian_area 1080p
at speed 2.
Change-Id: I0f12435857e9425ed7ce12541344dfa16837f4f4
This reverts commit 59e733ca81.
Hold off removing arnr_type to give users the opportunity
to change their script files to handle its deprecation. A
follow-up patch will mark the control for setting arnr_type
as deprecated and it will be removed completely in a later
revision of the code.
Change-Id: I8b817c744e144d3714234a4cd4309816d0c7e3e8
This member of VP9_COMP seemed unnecessary since it
only shadowed VP9EncoderConfig.key_freq that is
accessible through VP9_COMP.
Change-Id: Ib751bb1cf1b0b3c50a2a527d7c34f6829dd6fee3
The encoder was not handling requests to place keyframes at
fixed intervals, i.e. kf_min_dist == kf_max_dist, correctly.
In this case when looking to place the next keyframe it was
accumulating stats all the way up to the end of the firstpass
file. This patch corrects this behavior.
Change-Id: I948ad9f1d7faa0c05861df588136cce3bb61d7e7
This commit introduces a chessboard pattern search for the prediction
filter type search. It runs extensive search in alternate blocks and
allows the rest blocks to refer coding decisions of their nearby
neighbors.
For pedestrian 1080p at 4000 kbps, the runtime of speed -5 goes down
from 43990 ms to 42200 ms. The overall compression performance for
RTC set is changed by -1.37%.
Change-Id: Icfe220c49451cda796f0ca91d935c9ed01e56c9d
ARNR filtering is now forced to be centered on the ARF
frame and the other two options have been removed.
The other modes of constructing the ARNR frame were
not used and there does not seem to be any good
reason to maintain them.
This is purely an encoder-side change.
Change-Id: Ic772636d23f280752973852b9740083532a49de2
For speed 3 and above, such search is only allowed at speed 3.
The change helped cif and stdhd set by 1.2% and .7% in compression,
but increased the encoding time by around 5%.
Change-Id: Ifa4832327f1c1bef3decb032ceb769cbf50e059f
The end_useage parameter is confusingly named since it
now actually defines the rate control method used.
Change-Id: I98912caabfe556b7af0b939a645d1336409e4d71
This commit enables a background detection approach for adaptive
quantizer control. It combines the cyclic refresh pattern and the
background information to determine the segment id for adaptive
quantizer selection, prior to the non-RD mode decision process.
It hence allows proper quantization information update for a more
precise rate-distortion modeling in the non-RD mode decision.
The compression performance of speed -5 for rtc set is improved
by 2.5%, at no speed change.
Change-Id: Ic3713e8ed9185b403b5b1679d19dabd57506d452
1. We didn't scale source image in lower layers so that
the stats are incorrect.
2. We didn't extend borders for re-constructed image.
Change-Id: Ia8d7bafbdb695ffa7f504e171f9449812e7bb0a3
To make direct side by side testing this patch combines two
VBR corrections schemes to allow more direct side by side testing.
(The other patch was by Debargha chg id I0cd1f7...)
Change-Id: I271c45e5c4ccf8de8305589000218b80d9dc3a25
The background detection only tracks luma component. This commits
removes the frame buffer pointer retrieval for chroma components.
Change-Id: I098bd2950f5e5829ed5dc2b48568167248da7fad
This patch sets up a quad_tree structure (pc_tree) for holding all of
pick_mode_context data we use at any square block size during encoding
or picking modes. That includes contexts for 2 horizontal and 2 vertical
splits, one none, and pointers to 4 sub pc_tree nodes corresponding
to split. It also includes a pointer to the current chosen partitioning.
This replaces code that held an index for every level in the pick
modes array including: sb_index, mb_index,
b_index, ab_index.
These were used as stateful indexes that pointed to the current pick mode
contexts you had at each level stored in the following arrays
array ab4x4_context[][][],
sb8x4_context[][][], sb4x8_context[][][], sb8x8_context[][][],
sb8x16_context[][][], sb16x8_context[][][], mb_context[][], sb32x16[][],
sb16x32[], sb32_context[], sb32x64_context[], sb64x32_context[],
sb64_context
and the partitioning that had been stored in the following:
b_partitioning, mb_partitioning, sb_partitioning, and sb64_partitioning.
Prior to this patch before doing an encode you had to set the appropriate
index for your block size ( switch statement), update it ( up to 3
lookups for the index array value) and then make your call into a recursive
function at which point you'd have to call get_context which then
had to do a switch statement based on the blocksize, and then up to 3
lookups based upon the block size to find the context to use.
With the new code the context for the block size is passed around directly
avoiding the extraneous switch statements and multi dimensional array
look ups that were listed above. At any level in the search all of the
contexts are local to the pc_tree you are working on (in?).
In addition in most places code that used to call sub functions and
then check if the block size was 4x4 and index was > 0 and return
now don't preferring instead to call the right none function on the inside.
Change-Id: I06e39318269d9af2ce37961b3f95e181b57f5ed9
There is no need to initialize source/dst frame buffers at frame
level. These will be done at block coding stage. This commit hence
removes the redundant operations.
Change-Id: I11d9f2556058c6205c8e58ed53e31f78622c41b7
Add code to monitor over and under spend and
apply limited correction to the data rate of subsequent
frames. To prevent the problem of starvation or overspend
on individual frames (especially near the end of a clip) the
maximum adjustment on a single frame is limited to a %
of its un-modified allocation.
Change-Id: I6e1ca035ab8afb0c98eac4392115d0752d9cbd7f
This commit compares the current original frame to the previous
original frame at 64x64 block level and decides if the entire
block belongs to background area. If it is in the background area,
skip non-RD partition search and copy the partition types of the
collocated block in the previous frame.
For vidyo1 in the rtc set, this makes the speed -5 coding speed
about 8% faster. The overall compression performance is down by
1.37% for rtc set.
Change-Id: Iccf920562fcc88f21d377fb6a44c547c8689b7ea
Delete code relating to the old VP8_TUNE_SSIM flag
as this code does not currently work and is largely made
redundant in VP9 by the various AQ modes.
Change-Id: I71f28e1f680573d296422254489000678552b17b
Remove duplicate rd_thresh code introduced when vp9_rd_pick_inter_mode_sub8x8()
was forked from vp9_rd_pick_inter_mode_sb().
Change-Id: I3c9b7143d182e1f28b29c16518eaca81dc2ecfed
Fix rate control bug whereby the rate factor heuristics
were being updated on arf overlays causing a rate surge
for a few frames followed by a corrective drop.
This fix eliminates many of the overshoot problems that
we were seeing on hard clips (even without applying
stricter vbr rate control) and also helps quality on
almost all clips with some hard clips improving by >5%.
Overall quality results measured at speed 2.
Derf +1.78% opsnr , +2.44% SSIM
Stdhd +2.41% opsnr, +2.85% SSIM
Change-Id: I2369df6295c2705963fa6307877f6acb304bcc39
We don't use declarations from this file. The real declarations
(differently named) are in vp9_rtcd_defs.pl, e.g. vp9_full_search_sad.
Change-Id: I73cbf064305710ba20747233cfdbe67366f069a0
Added command line flags "resize-width" & "resize-height"
to allow the user to specify the frame size to encode at.
These two flags are ignored if the "resize-allowed" switch
is not set to 1.
All frames in the clip are then encoded at this size, which
must be smaller than the raw frame size.
Change-Id: I3d64bd9303d5c0bd678461a866a1ea621700d744
A previous path improved speed 2 quality a little but
more extensive testing showed that it slowed encode
by a few %.
The change will have a similar effect for speed 3 but
should not impact speeds 4+;
This experiment should reverse that and give a speed
up at the cost of a small quality loss.
Borg results pending.
Change-Id: I4493fc1541aaf44587f1a41ff219f7088da9252c
Both values are already checked as command line arguments:
RANGE_CHECK_HI(cfg, g_lag_in_frames, MAX_LAG_BUFFERS);
RANGE_CHECK_HI(extra_cfg, sharpness, 7);
Change-Id: I584798d587152d88dfd517c210054b466f4e5f8a
With a more approriate one vp9_setup_src_planes() as only src buffer
pointers need to be initialized here.
Change-Id: I40fac4d8b2d39eb7d0c65b9b6afab45138a13936
This increases the range of Q values available to
normal inter frames to allow encoder a better chance
to hit the target rate.
Change-Id: I33cd96469a46577fdcea631e26d3355710909e6d
The limits applied under the flag
"LIMIT_QRANGE_FOR_ALTREF_AND_KEY"
behaved in an undesirable way if the gap between
active_worst_quality and active_best_quality was
changed.
In this patch, the adjustment is made using the
vp9_compute_qdelta_by_rate() function and fixed
rate multiplier values. Hence it is not impacted by
the relative value of active_best_quality.
Change-Id: I93b3308e04ade1e4eb5af63edf64f91cd3700249
The cause is because VP9 encoding use vp8_vpxyv12_extendframeborders_neon
on arm which only extend boarder size 32. But VP9's border size is 160
Change-Id: I1ff7e945344a658af862beb1197925e677e8ff57
Problem has been introduced recently with the cleanup patch
I0816ec12ec0a6f21d0f25f10c214b5fd327afc6c
Change-Id: Iaacb956a6039eb5826b82618dc03be32053fb892
This commit changed the initialization of best_mode_index to -1 to make
sure it is not mistakenly used for mode masking.
Change-Id: I75b05db51466070dd23c4ee57a4d4b40764dc019
In mode selection loop, once mode_index pass mode_skip_start, all
modes with a different reference frame from current best mode are
masked out using mode_skip_mask.
However, the setting of mode_skip_mask may use an invalid mode if
there is no mode tested yet. This commit fixes the issue by making
sure a mode has been tested and selected. Otherwise, no mode will be
masked out because of their reference frame.
Change-Id: Ib0009e8a96836a65cf5347440fff8a2e1a67f29f
Calculate the difference variance between last source frame and
current source frame. The variance is calculated at 16x16 block
level. The variances are compared to several thresholds to decide
final partition sizes.
An adaptive strategy is implemented to decide using
SOURCE_VAR_BASED_PARTITION or FIXED_PARTITION based on motions
in the video. The switching test is done once every
search_type_check_frequency frames.
The selection of source_var_thresh needs to be investigated
further later.
RTC set Borg test showed 0.424% overall psnr gain, and 0.357%
ssim gain. For clips with large enough static area, the
encoding speedup is around 2% to 15%.
Change-Id: Id7d268f1d8cbca7fb8026aa4a53b3c77459dc156
This commit allows the non-RD mode decision flow to select
prediction filter type in NEWMV mode. It provides 8.14% compression
performance gains in both settings of AQ=0 and 3. The current speed
impact is about 5% to 10% slower.
Change-Id: Id66ecebf77abd8f90fb3f6a066c0e8dfb4bf1c42
Adds some high-level hooks for profile 2 before further
progress on the implementation.
According to the definitiion in this patch:
1. Profile 2 only supports 10 or 12 bit color but not 8
2. Profile 2 supports all color sampling modes: 444, 422 and 420,
and alpha plane.
3. Profile 3 is currently undefined.
Please consider the definition carefully and suggest modifications
to the definition as needed.
Change-Id: I5b284fc679e54ac5aee171af72fa7994cfd28995
