The commit changes the border pixel extension from 160 pixel each side
to what is necessary in arnr filter or motion estimation portion, i.e.
16 pixel on top and left side. For right or bottom side, the extension
is changed to either round up image size to multiple of 64 or at least
16 pixels.
Change-Id: Ic05e19b94368c1ab4df568723aae5734e6c3d2c5
Adds a new end-usage option for constant quality encoding in vpx. This
first version implemented for VP9, encodes all regular inter frames
using the quality specified in the --cq-level= option, while encoding
all key frames and golden/altref frames at a quality better than that.
The current performance on derfraw300 is +0.910% up from bitrate control,
but achieved without multiple recode loops per frame.
The decision for qp for each altref/golden/key frame will be improved
in subsequent patches based on better use of stats from the first pass.
Further, the qp for regular inter frames may also be varied around the
provided cq-level.
Change-Id: I6c4a2a68563679d60e0616ebcb11698578615fb3
mode_info_context was stored as a grid of MODE_INFO structs.
The grid now constists of a pointer to a MODE_INFO struct and
a "in the image" flag. The MODE_INFO structs are now stored
as a stream, eliminating unnecessary copies and is a little
more cache friendly.
For the test clips used, the decoder performance improved
by ~4.3% (1080p) and ~9.7% (720p).
Patch Set 2: Re-encoded clips with latest. Now ~1.7% (1080p)
and 5.9% (720p).
Change-Id: I846f29e88610fce2523ca697a9a9ef2a182e9256
The 32x32 forward transform can potentially reach peak coefficient
value close to 32700, while the rounding factor can go upto 610.
This could cause overflow issue in the SSSE3 implementation of 32x32
quantization process.
This commit resolves this issue by replacing the addition operations
with saturated addition operations in 32x32 block quantization.
Change-Id: Id6b98996458e16c5b6241338ca113c332bef6e70
Moves counting of mv branches to where we have a new mv, instead of after
the whole frame is summed.
Change-Id: I945d9f6d9199ba2443fe816c92d5849340d17bbd
This commit fixed the potential overflow issue in the SSE2
implementation of 32x32 forward DCT. It resolved the corrupted
coded frames in the border of scenes.
Change-Id: If87eef2d46209269f74ef27e7295b6707fbf56f9
- Intermediate height was not correct i.e. when block size is 4 and
y_step_q4 is 6. In this case intermediate height was
(4*6) >> 4 = 1 and vertical interpolation needs two source pixels
plus 7 extra pixels for taps.
- Also if the current output block is 16x16 and we are using 4x upscaling
we need only 12 rows after horizontal filtering instead of 16.
Patch Set 2: Intermediate_height updated after CL 66723
"Fix bug in convolution functions (filter selection)"
Change-Id: I5a1a1bc2ac9d5edb3a6e0818de618bf318fdd589
The 32x32 quantization process can potentially have the intermediate
stacks over 16-bit range, thereby causing enc/dec mismatch. This commit
fixes this overflow issue in the SSSE3 implementation, as well as the
prototype, of 32x32 quantization.
This fixes issue 607 from webm@googlecode.
Change-Id: I85635e6ca236b90c3dcfc40d449215c7b9caa806
This patch is a reformatted version of optimizations done by
engineers at Intel (Erik/Tamar) who have been providing
performance feedback for VP9. For the test clips used (720p, 1080p),
up to 1.2% performance improvement was seen.
Change-Id: Ic1a7149098740079d5453b564da6fbfdd0b2f3d2
Make the current head working properly, while working on fixing an
issue in the SSSE3 implementation of 32x32 quantization.
Change-Id: Ic029da3fd7f1f5e58bc641341cbd226ec49a16bc
Previous change c4048dbd limits the mv search range assuming max block
size of 64x64, this commit change the search range using actual block
size instead.
Change-Id: Ibe07ab02b62bf64bd9f8675d2b997af20a2c7e11
Making code more compact, adding consts, removing redundant arguments,
adding do/while(0) for macros.
Change-Id: Ic9ec0bc58cee0910a5450b7fb8cfbf35fa9d0d16
(In response to Issue 604:
https://code.google.com/p/webm/issues/detail?id=604)
There were bugs in the convolution code for two cases:
1. Where the filter table was assumed to be aligned to a
256 byte boundary. The offset of the pixel in the
source buffer was computed incorrectly.
2. Where no such alignment assumption was made. An
incorrect address for the filter table base was used.
To fix both problems, I now assume that the filter table is
256-byte aligned and modify the pixel offset calculation to
match.
A later patch should remove the restriction that the filter
table is aligned to a 256-byte boundary.
There was also a bug in the ConvolveTest unit test
(convolve_test.cc).
(Bug & initial fix suggestion submitted by Tero Rintaluoma
and Sami Pietilä).
Change-Id: I71985551e62846e55e40de9e7e3959d4805baa82
vp9_short_idct10_16x16_add is used to handle the block that only have valid data
at top left 4x4 block. All the other datas are 0. So we could cut many
unnecessary calculations in order to save instructions.
Change-Id: I6e30a3fee1ece5af7f258532416d0bfddd1143f0
It is possible to have invalid scale factors and not access them
during decoding. Error is reported if we really try to use invalid scale
factors.
Change-Id: Ie532d3ea7325ee0c7a6ada08269f804350c80fdf
Adding set_contexts contexts function and call it instead of
set_contexts_on_border. Calling txfrm_block_to_raster_xy to get aoff and
loff.
Change-Id: I41897e344afd2cae1f923f4fdbe63daccf6fe80e
Moving foreach_predicted_block_in_plane function to vp9_reconinter.c
because there is only one usage.
Change-Id: I9852feae43fc3cf809b817fc541d043bc5496209
Updating implementation of vp9_get_pred_context_single_ref_p2 using
has_second_ref function to make code easier to read.
Change-Id: I5ba642712f59861a48aab974e73aa01640d086fe
vp9_short_idct10_8x8_add is used to handle the block that only have valid data
at top left 4x4 block. All the other datas are 0. So we could cut several
unnecessary calculations in order to save instructions.
Change-Id: I34fda95e29082b789aded97c2df193991c2d9195
Updating implementation of vp9_get_pred_context_single_ref_p1 using
has_second_ref function to make code easier to read.
Change-Id: Ie8f60403a7195117ceb2c6c43176ca9a9e70b909
As the pixel values beyond image border are duplicates of pixels
on edge, the change limits the mv search range, any mv beyond
the limits no longer produce new/different prediction values
as entire block with pixels used for subpel interpolation are
outside image border.
Change-Id: I4c6fdf06e33c1cef1489f5470ce0fb4e5e01fb79
Updating all foreach_transformed_block_visitor functions to work with
plane block size instead of general block. Removing a lot of duplicated
code.
Change-Id: I6a9069e27528c611f5a648e1da0c5a5fd17f1bb4
This change set is intermediate. The next one will remove all repetitive
plane_bsize calculations, because it will be passed as argument to
foreach_transformed_block_visitor.
Change-Id: Ifc12e0b330e017c6851a28746b3a5460b9bf7f0b
The intent was to initialize the deltas for the
segment to the computed value, irrespective of mode
and reference frame if (mode_ref_delta_enabled == 0).
(In response to bug posted by Manjit Hota to codec-devel
and webm-discuss lists)
Change-Id: I10435cb63d0f88359bb4c14f22181878a1988e72
When the frame size changes the last frame segment map must
be resized to match and initialized to 0.
Change-Id: Idc10de109f55dbe9af3a6caae355a2974712243d
VP9_COMMON is the right place to segmentatation struct because it has
global segmentation parameters, not something specific to macroblock
processing.
Change-Id: Ib9ada0c06c253996eb3b5f6cccf6a323fbbba708
This commit unifies the rate-distortion cost calculation process of
luma and chroma components. It allows early termination to be enabled
later in the rd search loop of chroma components, in consistent with
luma pixels.
Change-Id: I2e52a7c6496176bf2a5e3ef338d34ceb8aad9b3d
Making foreach_transformed_block_in_plane more clear (it's not finished
yet). Using explicit tx_size variable consistently instead of
(ss_txfrm_size / 2) or (ss_txfrm_size >> 1) expression.
Change-Id: I1b9bba2c0a9f817fca72c88324bbe6004766fb7d
The macro block mode info context originally contained an
entry for each 16x16 macroblock. In VP9 each entry refers
to an 8x8 region not a macro block, so the naming is misleading.
This first stage clean up changes the names of 3 entries in the
structure to remove the mb_ prefix.
TODO clean up the nomenclature more widely in respect of
mbmi and bmi.
Change-Id: Ia7305c6d0cb805dfe8cdc98dad21338f502e49c6
Enable SSE2 implementation of high precision 32x32 forward DCT. The
intermediate stacks are of 32-bits. The run-time goes down from
32126 cycles to 13442 cycles.
Change-Id: Ib5ccafe3176c65bd6f2dbdef790bd47bbc880e56
Adding function build_inter_predictors_for_planes to build inter
predictors for specified planes. This function allows to remove
condition "#if CONFIG_ALPHA" and use MAX_MB_PLANE for general case.
Renaming 'which_mv' local var to 'ref', and 'weight' argument to 'ref'.
Change-Id: I1a97160c9263006929d38953f266bc68e9c56c7d
Invert loops to operate vertically in the inner loop. This allows
removing redundant loads.
Also add preloading of data.
Change-Id: I4fa85c0ab1735bcb1dd6ea58937efac949172bdc
Each iteration of the horizontal loop reuses 7 of the 11 source
values. Loading only the 4 new values saves some time.
Also add preload for source data.
Overall 4% faster on Chromebook.
Change-Id: I8f69e749f2b7f79e9734620dcee51dbfcd716b44
Loop filter configuration doesn't belong to macroblock, so moving it from
MACROBLOCKD to VP9_COMMON. Also moving the declaration of loopfilter struct
from vp9_blockd.h to vp9_loopfilter.h.
Change-Id: I4b3e34be9623b47cda35f9b1f9951f8c5b1d5d28
The memset sets 16 bytes rather than the correct size of the
final array dimension (MAX_MODE_LF_DELTAS).
(In response to bug posted by Manjit Hota to codec-devel
and webm-discuss lists)
Change-Id: I8980f5aa71ddc9d7ef57c5b4700bc28ddf8651c7
Using block width and block height instead of their logarithms. Using
SUBPEL_BITS and SUBPEL_SHIFTS constants instead of magic numbers.
Change-Id: I4e10e93c907c8a5e1cb27dfe74d1fcdcc4995448
Removing the old one bsize_from_dim_lookup. Now we have a way to determine
block size for plane using its subsampling values (ss_size_lookup). And
then we can find the number of pixels in the block (num_pels_log2_lookup).
Change-Id: I6fc981da2ae093de81741d3d78eaefed11015db9
Functions scale_mv_q4 and scale_mv_q3_to_q4 were almost identical except
q3->q4 conversion in scale_mv_q3_to_q4. Now q3->q4 conversion happens
directly in vp9_build_inter_predictor.
Also adding useful constants: SUBPEL_BITS and SUBPEL_MASK.
Change-Id: Ia0a6ad2ac07c45fdf95a5139ece6286c035e9639
Enable use_x86inc as a commandline option. Fix Bug with sse2 when
x86inc is disabled. Adds Sad asm protection to x86inc protection
Change-Id: Iee0f9dd235ea10e8ace512eb362ba9bebe8c9df6
There was no benefit having this function. For example, inside
read_switchable_filter_type switchable filter context was calculated twice.
Change-Id: I79cd5bf95cbc0f6d8bf91a2e32289e01b18dcff1
Converting arguments of two functions (clamp_mv_ref, lower_mv_precision)
from int_mv* to MV*. Rewriting is_inside function to make it much shorter.
Change-Id: Ie4c4cf3eccd46707c7df099ec21fb1b61c72fc7a
Support enabling it or disabling it. Moved read out to configure.sh
so that its done once instead of in make and in config.
Change-Id: I73a9190cf31de9f03e8a577f478fa522f8c01c8b
Currently the only threaded option for vp9 decode. Enabled when the
decoder config thread count is > 1.
Change-Id: I082959abac9e31aa4a38ed9fd68b94680e57f4df
This changeset allows to remove vp9_switchable_interp and
vp9_switchable_interp_map arrays and make code much clear. Actually we
still have to use these mapping but only inside read_interp_filter_type and
write_interp_filter_type functions.
Change-Id: I4026c6f8c4acefba6c81421b7bacbaa52cc45f50
Chromium does not support 32bit builds for Mac which use x86inc.asm.
Make the files which include it work if 64bit or not PIC enabled
starting with vp9_copy_sse2.asm
Consolidate these targets in vp9_rtcd_defs.sh
Change-Id: If18f0b957a611efd085a3ee7d245cf1eb91e8248
This is an attempt at rewriting vp9_find_mv_refs_idx. I believe that it gains
about 1-2% decode speed
Change-Id: Ia5359c94ce9bb43b32652890e605e9a385485c1b
Loading to single lanes in multiple registers is expensive since
it requires a read and write of each register which saturates
the register file access. Loading to single registers followed
by a separate transpose reduces this pressure.
Change-Id: I4cc35887ddbca80e5e635b50d2b1d158de9668ee
Removing assign_and_clamp_mv function, making implementation of clamp_mv
and clamp_mv2 more clear and consistent.
Change-Id: Iecd08e1c1bf0379f8314ebe01811f8253f4ade58
Adds a function to compute source variance for various
sb_types to be used for pruning mode and partition searches.
[The existing activity measure function is currently specialized
for only 16x16 MBs and needs to be updated].
Change-Id: I22a41e6f1430184201487326fdbebb9b47e6fc24
The inverse 32x32 transform detects all zero entries and skips the
computations accordingly per 8 rows in the first 1-D operation. The
function vp9_short_idct10_32x32_add performs differently and is not
used anywhere, hence removed.
Change-Id: Ic4fad422debbde7b6b6ffed47c69fbd4268a906c
This commit exploits the sparsity of quantized coefficient matrix.
It detects each 32x8 array and skip the corresponding inverse
transformation if all entries are zero.
For ped1080p at 8000 kbps, this on average reduces the runtime of
32x32 inverse 2D-DCT SSE2 function from 6256 cycles -> 5200
cycles. It makes the overall encoding process about 2% faster at
speed 0. The speed-up is more pronounceable for the decoding process.
Change-Id: If20056c3566bd117642a76f8884c83e8bc8efbcf
This commit provides special handle on 16x16 inverse 2D-DCT, where
only DC coefficient is quantized to be non-zero value.
Change-Id: I7bf71be7fa13384fab453dc8742b5b50e77a277c
Fixes a warning on MSVS 2012 where the alignment of vp9_default_iscan_8x8
didn't match between its declaration and definition.
Change-Id: I1466a15635f4b22594d705d570b7e399bfb6cf21
This commit enables a special handle for the 8x8 inverse 2D-DCT,
where only DC coefficient is quantized to be non-zero. For bus_cif
at 2000 kbps, it provides about 1% speed-up at speed 0.
Change-Id: I2523222359eec26b144cf8fd4c63a4ad63b1b011
Removing unused constants, macros, and function declarations. Using
ROUND_POWER_OF_TWO macro, vp9_zero, vp9_copy where possible. Moving
#include from *.h to *.c. Merging for loops for motion vectors.
Change-Id: Ic3bf841764a2bb177128bb3a6d7aa8f68229cd13
Add SSE2 implementation to handle the special case of inverse 2D-DCT
where only DC coefficient is non-zero.
Change-Id: I2c6a59e21e5e77b8cf39a4af5eecf4d5ade32e2f
Adding common merge_probs and merge_probs2 functions. Changing ints to
usigned ints in some places.
Change-Id: Icf088ffdea7cf5b95284a128916409bdd53506b0
Adding plane type check condition because it was always used outside of
get_tx_type_{4x4, 8x8, 16x16}.
Change-Id: I02f0bbfee8063474865bd903eb25b54d26e07230
Counts are separate from frame context. We have several frame contexts but
need only one copy of all counts.
Change-Id: I5279b0321cb450bbea7049adaa9275306a7cef7d
All filters are interpolating now, so we don't need this array, all
values from this array are evaluated to true.
Change-Id: I9af6d8219ae0eb984063cd15e4e2296374ae4961
many structures use bw and bh and they have different meanings. This cl attempts
to start this clean up and remove unneccessary 2 step look up log and then
shift operations...
also removed partition type multiple operation code in bitstream.c.
Change-Id: I7e03e552bdfc0939738e430862e3073d30fdd5db
Renamed:
MAX_MB_SEGMENTS to MAX_SEGMENTS
MB_SEG_TREE_PROBS to SEG_TREE_PROBS
The minimum unit for segmentation in the segment map
is now 8x8 so it is misleading to use MB_ as macro-block
traditionally refers to a 16x16 region.
Change-Id: I0b55a6f0426bb46dd13435fcfa5bae0a30a7fa22
Moving common encoder/decoder code to update_tx_counts. Also renaming
vp9_get_pred_probs_tx_size to get_tx_probs2 and adding get_tx_probs to
call vp9_get_pred_context_tx_size inside read_selected_tx_size only once
(twice before).
Change-Id: Ia50247f3893de88ef8e9041b0d44be44a40aaa4d
Update logic for both mode and mvref was the same, so using MODE_COUNT_SAT,
MODE_MAX_UPDATE_FACTOR, update_ct, update_ct2 for both cases. Removing
function update_tx_ct because it was identical to update_mode_ct2.
Change-Id: Iff566be27dbd6cde4c2ec04e8d988f207046b8f0
Stack the rate-distortion statistics in the sub8x8 rd loop. This allows
the encoder to skip the forward transform, quantization, and coeff cost
estimation, in the sub8x8 rd optimization search, if the motion
vector(s) are of integer pixel value, and have been tested in the
previous prediction filter type rd loops of the same block.
This gives about 2% speed-up for bus_cif at 2000 kpbs, for speed 0.
Its efficacy depends how frequently the motion search will select an
integer motion vector.
Change-Id: Iee15d4283ad4adea05522c1d40b198b127e6dd97
Adding loopfilter struct with fields from MACROBLOCKD and VP9Common.
Eventually it will be moved to vp9_loopfilter.h for better code structure.
Change-Id: Iaf5fb71c33719cdfa1b991f671caf071be9ea035
Changing fc->tx_probs back to fc->pre_tx_probs. This change actually
affects the bitstream but current test vectors work. Chrome branch is not
affected at all. Broken since:
cc662dd Adding struct tx_probs and struct tx_counts to cleanup the code.
Change-Id: I36dd4b3678e902e10aba8dd49b0012eb558c209d
Renaming vp9_sb_mv_ref_tree to vp9_inter_mode_tree, and
vp9_sb_mv_ref_encoding_array to vp9_inter_mode_encodings.
Change-Id: I0e91fbf81350d3ec5a2599064c74089b5d06133a
This prevents a duplicate memcpy of a 128-byte struct every time
set_scale_factors() is called (which is a lot), thus leading to a
decrease from 3.7 MB to 1.85 MB of struct copying per 64x64 block
RD/partition loop.
Overall, this decreases encoding time of the first 50 frames of bus
@ 1500kbps (speed 0) from 1min5.9 to 1min4.9, i.e. about a 1.5%
overall speedup. We can likely get more gains by removing the copy
of the other struct (and replacing it with an indexing) as well.
Change-Id: I3dceb7e79f71e6fe911b11cc994cf89a869dde7a
these are only used in the encoder.
frames_since_golden / frames_till_alt_ref_frame -> VP[89]_COMP
Change-Id: Ie14a6f46987bced685ddb449b85dc261caba6dfe
These arrays have constant values (no any updates). Removing two
corresponding memcpy calls. Making a little cleanup in vp9_entropymode.h
as well: removing redundant 'extern' keyword and moving all function
declarations at the end.
Change-Id: Ia16b38b46aec2e2500f5df29c40a297ae241dede
Call the individually optimized horizontal and vertical functions. This
implementation abuses the temp buffer.
This will be replaced with a custom optimized function.
Over 2x speedup.
Change-Id: I5b908d2a73d264e9810d6022bbff73207a3055dd
Removing tile_rows and tile_columns from VP9Common, removing redundant
constants MIN_TILE_WIDTH and MAX_TILE_WIDTH, changing signature of
vp9_get_tile_n_bits.
Change-Id: I8ff3104a38179b2c6900df965c144c1d6f602267
Cosmetic code changes, renaming 'flat' local var to 'mask', removing
unused field 'blim' from loopfilter_info_n and loop_filter_info structs.
Change-Id: I51e6ccf727fe361ad9a08e29e1201aa7abd4987f
This commit enables SSE2 implementation of 16x16 inverse ADST/DCT
hybrid transform. The runtime goes from 5742 cycles -> 1821 cycles.
This provides about 1% encoding speed-up at speed 0.
Change-Id: I1678d0988bf30b9efd524877705bbb3645edb17b
Making implementation of vp9_set_pred_flag_{seg_id, mbskip} consistent
with vp9_get_segment_id without using confusing sub(a, b) macro. Passing
mi_row and mi_col to functions explicitly instead of replying on
mb_to_right_edge and mb_to_bottom_edge.
Change-Id: I54c1087dd2ba9036f8ba7eb165b073e807d00435
In the prior code, the above context pointers used for entropy
decoding were initialized on the first frame, and not updated when
the frame size changed. The per-frame code which initializes the
contexts assumes that the contexts are contiguous, leading to an
incomplete initialization when the frame is smaller. This commit
updates the pointers so that the context is contigous whenever
the frame size changes.
Change-Id: I08b53e3a30c8289491212311682ff1b8028cff6c
This is a short term optimization till we work out a decoder
implementation requiring no frame border extension.
Change-Id: I02d15bfde4d926b50a4e58b393d8c4062d1be70f
Renaming flatmask4 to flat_mask4, flatmask5 to flat_mask5, hevmask to
hev_mask, filter to filter4, mbfilter to filter8, wide_mbfilter to
filter16.
Change-Id: Ic61c73e59c2eee505257584867aafac99833cea1
Change the mbfilter Neon code from executing both branches if all
vectors follow only one branch.
The code is about 5% faster when executing only one branch and about
1% slower when executing both branches.
-PS5: Remove local stack space from mbfilter.
Change-Id: I6a23f9b318a9f4568a2718b4c9348db988fe2182
This commit enables SSE2 implementation of 8x8 inverse ADST/DCT
transform. The runtime goes from 1216 cycles -> 266 cycles.
For bus_cif at 2000 kbps, the overall runtime reduces from
253707ms -> 248430ms, i.e., 2% speed-up at speed 0.
Change-Id: Ib0372e17e9162d7b11a10d653b1c8be547c878fb
Adding missed parenthesis around boolean expressions. Bitstream is changed.
Regenerating test vectors.
Change-Id: I4cc00b761e9473f92f180a9fc3a0c607f0aaae56
Super basic conversion from the other implementations. Any changes to
one should be trivial to copy over keep in sync.
Change-Id: I1720b4128e0aba4b2779e3761f6494f8a09d3ea8
this was never fleshed out in the context of VP8, for which it was
added. for VP9 it has no meaning.
Change-Id: Iba2ecc026d9e947067b96690245d337e51e26eff
Implements some of the helper functions more efficiently with
lookups rathers than branches. Modeling function is consolidated
to reduce some computations.
Also merged the two enums BLOCK_SIZE_TYPES and BlockSize into
one because there is no need to keep them separate (even though
the semantics are a little different).
No bitstream or output change.
About 0.5% speedup
Change-Id: I7d71a66e8031ddb340744dc493f22976052b8f9f
Adding segmentation struct to vp9_seg_common.h. Struct members are from
macroblockd and VP9Common structs. Moving segmentation related constants
and enums to vp9_seg_common.h.
Change-Id: I23fabc33f11a359249f5f80d161daf569d02ec03
