Threshold for partitioning only affects VGA and lower res.
0.07% quality regression is observed in borg tests on rtc_derf
and 0.2% regression on rtc.
5.6% speed up for low res and 6.8% for VGA on Nexus 6.
Change-Id: If85a2919b48c991de66059c90f32ed06980452be
Modified the encoding stage to have row level entry points with relevant
initializations and to access the token information at row level
Change-Id: Ife10e55a7c1a420ee906d711caf75002688d9e39
Clears up static clang analysis warning regarding a dead store. Only
declare 'c' when it will be used.
Change-Id: I1ac0fc7f94bc44da63938c63cd1efcd6b95e0eb3
This commit resolves the compression performance regression in
real-time encoding setting when high bit-depth mode is enabled.
The current solution temporarily disables the SIMD implementations
of vpx_satd, hadamard8x8, and hadamard16x16 in high bit-depth mode.
The commit makes the coding results bit-wise identical between
regular coding pipeline and high bit-depth at profile 0.
BUG=webm:1365
Change-Id: Icfb900821733749685370460a1a5a7e07f76f4bf
In non-rd pickmode: Allow speed 7 to also use larger block size in
model_rd. Small change in behavior for speed 7.
Change-Id: I8c5523e424308e8f0bc71b3f6324dec42a464cc8
In non-rd pickmode: small change in behavior for speed 6 and 7.
Remove condition on HIGHBITDEPTH flag.
Change-Id: I360a13fcc313d72612fe9b918162ef4bb278cdea
Skip denoising for blocks < 16x16, and for block = 16x16
skip denoising for low noise levels and width > 480 for now.
Allow for some speed-up in denoiser.
Change-Id: Ib46cefe4741962d145fa08775defea3a9c928567
(yunqingwang)
1. Rebased the patch. Incorporated recent first pass changes.
2. Turned on the first pass unit test.
Change-Id: Ia2f7ba8152d0b6dd6bf8efb9dfaf505ba7d8edee
Increase the qp-delta, mainly for low resolutions,
excluding case of very low bitrates.
avgPSNR/SSSIM gain of ~3-5% on rtc_derf set.
Small change on rtc set.
Change-Id: Ice03d04bd0340404d1957666ef154fd64fed0606
Affecting only speed 8.
Speed tests on Nexus 6 show 4% faster for QVGA and 2.4% faster for VGA.
Little/negligible quality regression observed on both rtc and rtc_derf sets.
Change-Id: I337f301a2db49a568d18ba7623160f7678399ae1
(Yunqing)
This patch added the missing initialization in temporal filter.
Borg test BDRate results:
PSNR: -0.019%(lowres); -0.013%(hdres);
SSIM: -0.001%(lowres); -0.010%(hdres).
Other q values gave comparable but no better results.
Change-Id: I7ad0c18b39e6f558342688e2fe1e12fdb133ce9b
Only for speed >= 7, and affects skipping of intra modes.
Threshold is set low for now, needs to be tuned.
Small/no difference in metrics on rtc clips.
Change-Id: If9bdbd43f08d1f80407cdd2e9e5e96780dcd2424
For short_circuit set to level 1, skip newmv for 64x64 blocks if the
low temporal variance flag is set. Also modify threshold for 64x64 split
in variance partitioning.
Overall speed-up on noisy clips of 2-4%.
Only affect speed >= 7.
Change-Id: I384b3772007e84de6f8707e480d2ddf1fe1f907d
Avoid quality loss when copying partition of superblock with large motions.
Maximum consecutively copied frames can be set (currently 5).
Change-Id: I11c30575514f02194c0f001444cf4021609e5049
Also set the flag to 1 when exit early choosing 64x64 block
such that skipping new mv for golden works in these scenerios.
Change the size of prev_segment_id to the number of superblocks
to save memory.
Borg test shows quality regression of 0.012% on average PSNR
and 0.035% on SSIM.
Change-Id: I5014224c8617d439d35c66ece3fed9ae30b31d23
The fix relaxes the max qindex based on the data from previous loop of
coding if output frame size is greater than maximum frame size allowed
Change-Id: Iac1f63ec67559d68766e090a7cbb80b812b2560f
before calling vp9_apply_encoding_flags() which may crash if the
resolution was invalid. this is the same change as:
c0523090b vp8e_encode: check validate_config return
BUG=https://bugzilla.mozilla.org/show_bug.cgi?id=1315288
Change-Id: Icd2aab322422e83d3a778fca6d7789e5000239d7
If enabled will compute source_sad for every superblock on every frame,
prior to encoding. Off by default, only on for speed=8 when
copy_partition is set.
Change-Id: Iab7903180a23dad369135e8234b7f896f20e1231
Avoid many visual artifacts. Compression quality is improved by more
than 1%. Encode speed is about 4% for QVGA and 6% for VGA faster on
android.
Change-Id: I4dd0a81429ddf7efdef1e80a191da5fb8de8e8af
For speed 8, it speeds up the encoding on android by 6% for QVGA and
7.4% for VGA with the new threshold. Overall PSNR is improved by 0.667
for rtc.
Change-Id: I4a644560b32c0b5b4e9f49ffb953d000413a3732
If enabled denoiser will only denoise the top spatial layer for now.
Added unittest for SVC with denoising.
Change-Id: Ifa373771c4ecfa208615eb163cc38f1c22c6664b
When aq=3 mode is on and the gf_cbr_boost is set: make sure golden frame
is always refreshed, and don't incorporate segement cost in qp setting
on the boosted golden frame.
Better performance on RTC set with gf_cbr_boost on,
for example with gf_cbr_boost=50, gains from ~0.5-3%.
Change-Id: Ie811f5e4d444ff3320bd6e2c1745b2c4c09a8460
Quality improved by 1.866 and 0.386 for two noisy clips (dark720p and
marcooffice720p), respectively.
Change-Id: Ib33a7672ae9ca53da156208f7cd13f07b5543e44
Avoid the qp-clamping on gf/alt frame if gf_cbr_boost_pct is set.
Change only affect CBR mode when gf_cbr_boost_pct is set.
Change-Id: I0655ed4f2b047c8ed1ed33a070c17960ad776704
Increase the boost threshold below which GOLDEN update will use same
rate correction factor as INTER_NORMAL.
Improves performance when gf_cbr_boost_pct is set (between 0 and 100)
in CBR mode.
Change-Id: I9f54cc18664786a100b13a416b7137ae03bd0cab
Set short_circuit_low_temp_var to 3 for speed 8 for all res.
No strong visual difference on all clips.
Change-Id: Ia6d9a314291ab1c14d5421bbdd769974083aeb2a
Constraints on encoder config:
-target_bandwidth is no larger than 80% of level bitrate limit
-target_bandwidth * (1 + max_over_shoot_pct) is no larger than
88% of level bitrate limit
-min_gf_interval is no smaller than level limit
-tile_columns is no larger than level limit
Constraints on rate control:
-current frame size plus previous three frames' size is no larger
than the CPB level limit
-current frame size is no larger than 50%/40%/20% of the CPB
level limit if it's a key/alt-ref/other frame.
Change-Id: I84d1a2d6d6e3c82bfd533b3309ce999cfaba2c8b
The source sad could be used to copy the partition without going into
choose_partitioning function to speed up vp9 encoding. Computing source
sad takes little time. Speed test on Android and Linux shows little
encoding time gain (less than 1.4%).
Turned off for now since partition copy is turned off.
Change-Id: I61c9d5b8f22329760cb29a4ee30a7f9c232ce8d3
vp9: Set short circuit to level 3 for VGA for speed 8. Also change the
threshold_32x32 to 5/8*thresholds[1] to improve quality regression
caused to VGA clips.
Change-Id: Ia1590e91e7cb22be78d5b85013387bb1be4272e3
For out-of-range cases, returned UINT_MAX instead of INT_MAX in the
sub-pixel mv search to be consistent with the "uint32_t" return type.
Change-Id: I8e206d771228c13d89bafbbe9f14722c8ecc6a7a
The function 'vp9_find_best_sub_pixel_tree_pruned_more' is modified
to return INT_MAX for handling invalid MV cases from UINT32_MAX.
yunqingwang:
patch 3: rebased on top of the tree.
patch 4: The return type of vp9_find_best_sub_pixel_tree* was changed
to uint32_t to fix ubsan warnings. Changing UINT_MAX back to INT_MAX
was not quite right. Patch 4 modified vp9_temporal_filter.c to accept
uint32_t.
(Note: Inconsistency exists in vp9_find_best_sub_pixel_tree*, which
will be fixed in a separate CL.)
Change-Id: Ib1a79dc2aa41ea6335c21669c76883cdbb7e0535
When source frame is altref, we only do zero-mv mode, so we can skip
the find_predictors(). No change in compression.
Small speed gain, ~1%.
Only affects 1 pass vbr with lookhead altref, for ytlive with
the macro flag USE_ALTREF_FOR_ONE_PASS on.
Change-Id: I9318c5da8521f017bf54919cd652438b3a6313d1
Remove superfluous test. Produces a small improvement in instruction scheduling.
Measured a 1% to 1.5% reduction in execution time for routine vp9_optimize_b
with different compilers.
No change in behavior.
TEST=Verified that encoded files match bit for bit, with and without this
change.
BUG=b/33678225
Change-Id: I2bf248d4c25fc0256147d7a8766ff9108ae9cba3
Add feature to copy partition from the last frame.
The copy is only done under certain conditions that SAD is below threshold.
Feature is currently disabled, until threshold is tuned.
Feature will be initially used for Speed 8 (ARM).
Under extreme case of always copying partition for speed 8:
Encode time is reduced by 5.4% on rtc_derf and 7.8% on rtc.
Overall PSNR reduced by 2.1 on rtc_derf and 0.968 on rtc.
Change-Id: I1bcab515af3088e4d60675758f72613c2d3dc7a5
Simplify address arithmetic on token_costs to reduce the number of generated
instructions that are used for address arithmetic inside routine
vp9_optimize_b. It also helps improve instruction scheduling depending on
compiler and optimization level.
Measured a 9.3% reduction in retired instructions and 5.3% reduction in
execution time for this routine with GCC v4.8.4 and optimization flags -O3,
and a reduction of up to 11.6% in execution time with other compilers.
No change in behavior.
TEST=Verified that encoded files match bit for bit, with and without this
change.
BUG=b/33678225
Change-Id: I6098650fb5cd2aa04e014fe6e68ca20761f3a21f
Correctly set interp_filter to SWITCHABLE for INTRA mode.
Also reduce threshold on noise level for re-evaluating zeromv.
Change-Id: Id32c01e193209fb380aa07204f0be3babf29f70a
For when denoising enabled: change condition to enable
the recheck_zeromv_after_denoising for only very high noise level.
This is causing an issue, so enabling it for very high noise
to effectively shut it off.
Change-Id: Ic40d6025f3f398338cedd270d17c0ccd9a3daa84
The flag USE_ALTREF_FOR_ONE_PASS allows for alt-ref lookahead
in 1 pass vbr (from https://chromium-review.googlesource.com/#/c/365498).
This change is to make sure this macro flag only has effect if
the config flag cpi->oxcf.enable_auto_altef is also on.
No change in ytlive encoding, as USE_ALTREF_FOR_ONE_PASS is not
yet enabled.
Change-Id: I1a69681e4a15c5244581a3dab4587fca08f02e0f
use_base_mv assumes 2x2 scaling, so fix is to shutoff
this feature unless spatial scale factors are 2.
Added svc unittest for 2 spatial layers with 5x5 scaling,
which generates the issue without this fix.
Also fix some settings in svc unittest:
let the speed setting vary (from 5 to 8), and enable static threshold.
BUG=webm:1344
Change-Id: Idfd0a6c633c21b49a0479601506302cfe974e30e
One of the first pass stats "new_mv_count" is no longer used in VP9,
and is removed. This also makes it easy to implement a multi-threaded
first pass. This change doesn't affect the coding performance, which
has been verified by borg tests.
Change-Id: I4c7c7bf9465fda838eb230814ef0c631c068c903
Use the segment weight factor based on the target (cr->percent_refresh)
if it less than the current estimate (avergae of past usage and target).
Small improvement at low bitrates.
Change-Id: Iba8fd909e203f94458901366d3a991f7ea854d49
Increase the motion threshold and qp-delta for segment#2 boost.
This can increase the frame-drop at low bitrates, but generally
better spatial quality.
Only affects real-time mode with aq-mode=3, at very low bitrates.
Change-Id: I5ccb784667f70d0c27d369806b93b1f93d5605d1
best_sub8x8[1] won't be used meaningfully when is_compound is false, but
may trigger an msan warning as the value is copied around and later
clamped.
BUG=667044
Change-Id: Icc24c3b72cdb550bebea44d4aaa4ff8bf3fbab56
Use the same feature as https://chromium-review.googlesource.com/#/c/411327/,
but allow it to be used for speed = 6 and 7, where
short_circuit_low_temp_var = 1.
Speed up of ~2-3% for speed 7, with little/no loss in compression.
Change-Id: I263a0f261ad9929034392d68f0153dc6376fdb5f
This is a boolean value that is written into bitstream, any value other
than 0 or 1 could have led to unexpected behavior. This commit fix the
issue by adding validation of the value to make sure it is boolean.
BUG=webm:1339
Change-Id: I2d3e69e8dbefcab9a0db9cb39a91a40ce531c5a1
Add a new, more aggresive short circuit: short_circuit_low_temp_var = 3 to skip
golden of any mode when variance is lower than threshold for low res.
This change only affects speed = 8, low resolution.
Metrics for avgPSNR/SSIM on rtc_derf (low resolution) show loss of
0.27/0.31%.
On Nexus 6, the encoding time is reduced by ~2.3% on average across all
low-res clips.
Visually little change on rtc_derf clips.
Change-Id: Ia8f7366fc2d49181a96733a380b4dbd7390246ec
Changes only affects speed = 8 for low resolutions.
Metrics for avgPSNR/SSIM on rtc_derf (low resolutions) show loss of
0.5/0.6%.
On Nexus 6, the encoding time is reduced by ~5.9% on average across all
low-res clips.
Visually little/no change on rtc_derf clips.
Change-Id: I68dd50e558d72dcc1af8317d224bfae5e3bd872d
This commit enables asymptotic closed-loop encoding decision for
the key frame and alternate reference frame. It follows the regular
rate control scheme, but leaves out additional iteration on the
updated frame level probability model. It is enabled for speed 0.
The compression performance is improved:
lowres 0.2%
midres 0.35%
hdres 0.4%
Change-Id: I905ffa057c9a1ef2e90ef87c9723a6cf7dbe67cb
usage of the vp8 versions was removed in:
3f72509 vp8: remove VP8_SET_DBG* control support
vp9 had the usage stripped even earlier.
Change-Id: I978142eb6492552cd29c9c6feb1e89acfc5f7b84
For noisy content, be more aggressive in skippping some blocks for
delta-qp to reduce noise pulsing artifact. Also treat frame boundary
case when dimension is not multiple of superblock size/64.
Only affects non-screen content case, and when source noise
is measured to be high (at least level kMedium).
Change-Id: Ib13a2a20ed1ce37ff3c44d95c3ef2635fd695222
Add condition that usable_ref_frame > LAST.
This is to avoid potentially skipping all last-nonzero mv modes,
if golden is used as a reference but skipped completely for the
current block.
This has no effect currenty, as we always consider testing golden
mode for each block.
Change-Id: I3182cf44664081935a90ed43aa7b32e710e60e22
Fixed formatting bug introduced by the fix to BUG=webm:1322
( Iedc4477aef1746aa0a4f84d88a1156296fd3ba87)
Change-Id: I715ee446c0e8584967ab87ba4e355759dd394187
vp9_init_macroblockd() resets the error_info to cm's global copy; this
needs to be set to the thread-level target to avoid jumping to the
incorrect stack, resulting in hang or crash.
broken since:
1f4a6c8 vp9/tile_worker_hook: add multiple tile decoding
includes v1.5.0, v1.6.0
BUG=629481
Change-Id: Icbf1696b25ba8c479e845fbf227b3c3ca73542f5
This change is a step in a larger change to the way boost and interval are
determined for ARF and Key frames.
This patch contains some pluming for the general case but focuses on the
key frame boost calculation. This now relies more heavily on the rate at
which the error score increases between the primary and secondary reference
frame. This seems to be less fragile when dealing with different frame sizes.
For example larger image formats tend in the first pass to see a higher
% of intra coded blocks and the use of this number in calculating the frame
decay factor was leading to much lower boost numbers for 4K, for example,
than the same clip coded at 2K.
This change does give overall gains but they are MUCH larger for the 4K Netflix
set. For the 4K Netflix set the average gain is around 3% with some clips > 20%
whereas for the same set at 2K the average gain is 0.5-1%.
In general for small image formats the boost is most often reduced a little whereas
4K clips the boost is increased. There are some -ve cases such as Akiyo at 352x288
where the reduced boost hurts the metrics, especially for SSIM, even while
the set as a whole improves. This is most notable at very low Q and may be the
subject of a future patch.
Some common code for KF and ARF was separated in this patch for the purposes of
tuning but may later be re-merged if appropriate.
Change-Id: Iaa15ac5a58d2be89181100d95cef6a8dc4b12d0d
Fixes a case where recode is not triggered based on the value
of maxq passed into the recode loop test function.
BUG=b/32375284
Change-Id: I15ad985d0525c68e0443cfaf842440d2754b2266
Removed a couple of adjustments that no longer move the needle
much but complicate the process of tuning.
Change-Id: Ie320f5cf155e6aac14a4757ea9ada2cd59f27590
This patch modified the motion search counts used in:
https://chromium-review.googlesource.com/#/c/305640/
These 2 counts were originally added as thread data, and used to
make decisions in motion search. The tile encoding order can be
inconsistent while using different number of threads, which can
cause bitstream mismatch. Here moved them to tile data to solve
the issue.
BUG=webm:1322
Change-Id: Iedc4477aef1746aa0a4f84d88a1156296fd3ba87
Re-use the tile worker threads to pack the bitstream in parallel
on a per-tile basis. Restricting this to real-time only for now
(further testing is needed to ensure this does not make 2-pass
worse in any case).
BUG=webm:1309
Change-Id: I8a80da7c5089b837d0df79a5c49d5e3022dfc8ec
In variance partition low resolutions may use varianace based on
4x4 average for better partitioning.
Increase the threshold for doing this at speed = 8.
Improves speed by ~5%, with little loss, < 1%, on RTC_derf set.
Change-Id: Ib5ec420832ccff887a06cb5e1d2c73199b093941
This reverts commit 9e8efa5b18.
this change causes ubsan warnings, failures in
vpxenc_vp9_webm_rt_multithread_tiled
BUG=webm:1309
Change-Id: I020c7be985c771bfff4b3de1afe51cc8edb980da
Add stronger condition for splitting 64x64, for low noise content.
This reduces dragging artifact near moving head.
Little/no change in metrics on RTC set.
Change-Id: I39b38cfd20f2ece53ff49c2aaf76ba9f82761be1
Re-use the tile worker threads to pack the bitstream in parallel
on a per-tile basis. Restricting this to real-time only for now
(further testing is needed to ensure this does not make 2-pass
worse in any case).
BUG=webm:1309
Change-Id: Ia2c982da56697756e12f02643f589189b3271d98
For 1 pass vbr real-time mode:
Allow for the usage of alt-ref frame when non-zero lag-in-frames is used.
Use non-filtered alt-ref, and select usage based on fast scene/content
analysis/detection within the lag of frames.
Positive gains on ytlive set: overall avgPSNR ~3-4%.
Several clips are up between 5-14%, a few clips are neutral/small change.
Current speed decrease is about ~5-10%.
Use the flag USE_ALTREF_FOR_ONE_PASS to enable this feature
(off by default for now).
Change-Id: I802d2bf3d44f9cf01f6d15c76be9c90192314769
Put limit on gf interval based on lag, and allow
for the adjustment on next gf group also on key frame.
Small/neutral change on ytlive metrics.
Change only affects 1 pass vbr real-time mode.
Change-Id: I339c8f4398848698b6e10fe9482c52ca661b94a5
It only handles the realloc constraint (preserving low elements) by
serendipity, and we don't actually rely on that behavior anyway.
Meanwhile the calls may do extra copying that gets immediately clobbered
by the callers.
Change-Id: I8dfa89e4a81084b084889c27bd272fdf85184e8d
This change will make the highbd txfm input range check more comprehensive
The 25-bit highbd input range is composed by
12 signal input bits + 7 bits for 2D forward transform amplification + 5 bits for
1D inverse transform amplification + 1 bit for contingency in rounding and quantizing
BUG=https://bugs.chromium.org/p/webm/issues/detail?id=1286
BUG=https://bugs.chromium.org/p/chromium/issues/detail?id=651625
Change-Id: I04c0796edd7653f8d463fba5dc418132986131e7
These caused the following warning with GCC 5:
warning: logical not is only applied to the left hand side of
comparison [-Wlogical-not-parentheses]
assert(!is_compound == (cm->reference_mode == SINGLE_REFERENCE));
Change-Id: If296aabb2311ceb7d903b395c1549ef81c2cbf9b
(cherry picked from commit c6cf7a6111)
Rename vpx_lpf_horizontal_edge_8() to vpx_lpf_horizontal_16().
Rename vpx_lpf_horizontal_edge_16() to vpx_lpf_horizontal_16_dual().
Change-Id: I798ca8fbbd657d06d3db2bfb0fb3321168f49e52
This patch sets the 16x16 src_diff to zero and ensures correct calculation
of this_error for block sizes smaller than 16x16.
Change-Id: I7b7c02d267433c9f22c8ac9b8d5df2f499175172
change_config() may be called often in real-time application,
to update bitrate/framerate or qp-max/min.
No need to do update_frame_size() unless frame size has changed.
Change-Id: I23a51deade1e03adc91c468f9ffde3235298770c
For real-time mode at speed 8: turn off MINIMAL_LF at speed 8,
for non-screen content mode.
Visually better, avgPSNR/SSIM on rtc set go up by ~4-5%.
Speed decrease of about ~3%.
Change-Id: I8eb69330f02e0ceece1507d43cfc8a049a1d8291
Inline function called from test/dct16x16_test.cc wouldn't build due to:
invalid operands of types ‘__gnu_cxx::__enable_if<true, double>::__type
{aka double}’ and ‘int’ to binary ‘operator>>’
return (abs(ref->row) >> 3) < COMPANDED_MVREF_THRESH &&
this converts the test to abs() < COMPANDED_MVREF_THRESH << 3 which
hides the promotion issue.
Regression from commit de993a847f
BUG=webm:1291
Change-Id: I73b5943d07d5b61b709d299114216a2371a8fd62
Current version does not build with options:
--enable-vp9-highbitdepth --enable-coefficient-range-checking
Change-Id: Ic3285f1a3e0d6be88da7f2cd8fa5a631368dd03b
Reduce the filt_guess for 1 pass cbr on inter-frames.
This reduces visual artifact seen in rtc clip (jimred.vga),
and improves metrics on rtc set.
Metrics on rtc set for cbr mode overall positive, most clips are up:
Speed 7 rtc: avgPSNR/SSIM up by: ~2.6/3.9%
Speed 8 rtc: avgPSNR/SSIM up by: ~1.3/2.5%
Change-Id: Ia4eccea1c19d65b583516df28823cd756c49464f
Added a cap on the maximum boost for an arf based on interval length.
Fixed bug where by the image size was not accounted for in determining
two of the motion breakout thresholds.
Overall small gains of 0.2-0.4% psnr but on large image format clips with
slow zooms the gain may be as much as 20% or more (e.g. in_to_tree
at 1080P)
Change-Id: Id0a47391203026742daa9c97afac5705fd8c4dfb
Do nothing in vp9_highbd_iht#x#_##_add_c when input magnitude is beyond
20 bits. Note that, sign bit is not included here.
In the 20 bits, we use 12 bits for input signal, 7 bits for forward
transform amplification, and 1 bit for contingency in rounding and
quantizing
BUG=https://bugs.chromium.org/p/webm/issues/detail?id=1286
Change-Id: I332c6f68df4614fc2e7d2dc4c5bb0d0cff8a245c
the --enable-postproc-visualizer configure option remains as a no-op as
do the control names and values for compatibility
+ remove the corresponding debug flags from vpxdec: --pp-*
Change-Id: I4a001cd9962b59560d7d6bda6272d4ff32b8d37c
The vp9_mv_class0_tree is a balanced tree with two leafs and can
simply be coded as a boolean with probability class0[0].
Change-Id: If294dac825a5f945371092c74aa8e3f84cd962b6
(cherry picked from commit be8a8ab62ebdd111c6f2e9a33b15630570671eba)
Remove the experiment LIMIT_QP_ONEPASS_VBR_LAG, as its
not currently used and no plan to use in near future.
Change-Id: Ib069f8d7225195be04b765d0ab477510dfba6a3b
Added casts to remove warnings:
BUG=webm:1274
In regards to the safety of these casts they are of two types:-
- Normalized bits per (16x16) MB stored in a 32 bit int (This is safe as bits
per MB even with << 9 normalization cant overflow 32 bits. Even raw 12
bits hdr source even would only be 29 bits :- (4+4+12+9) and the encoder
imposes much stricter limits than this on max bit rate.
- Cast as part of variance calculations. There is an internal cast up to 64 bit
for the Sum X Sum calculation, but after normalization dividing by the number
of points the result will always be <= the SSE value.
Change-Id: I4e700236ed83d6b2b1955e92e84c3b1978b9eaa0
Using a tighter resize constraint on undershoot seems to help
results (especially SSIM) as significant undershoot on a frame
seems to have more of a damaging impact than overshoot.
This patch has been tuned so that in local testing using the
derf set it is encode speed neutral for speed setting 2.
Average quality result for speed 2 (psnr,ssim) were as follows:-
lowres 0.039, 0.453
midres 0.249, 0.853
hdres 0.159, 0.659
NetFlix -0.241, 0.360
Change-Id: Ie8d3a0d7d6f7ea89d9965d1821be17f8bda85062
This patch is to address concerns that changes to allow
recodes on the first frame in each ARF group do not give a
good enough speed quality trade off for speed 2. Though the
average impact on encode speed is 1-2%, for some hard clips
it is > 5% rise. For speed 1 this is less an issue and for Speed 0
the previous patch actually improves speed.
Change-Id: Ie1bcefdbfdf846d3f4428590173f621465dffe3a
This corrects a formatting error introduced in:
I1e9d548ce445d29002f0c59ebfd3957a6f15e702
where spaces were used as delimiters instead of tabs.
The corresponding fix for vp10 is in
Ica3d625d6672b3c47e0e208b45eede29b9004030.
Change-Id: Ibc4eb8fd82e6b926ba259a679dc98557cadba9b1
Current commit is just an API template for the rest of the code, and
I will add inner logic later.
Altref frames generate a lot of bitrate and at the same time
other frames refer to them a lot, so it makes sense to apply
special compensation-based adaptive quantization scheme for altref
frames. E.g., for blocks that are good predictors for the future
apply rate-control chosen quantizer while for bad predictors apply
worse one.
Change-Id: Iba3f8ec349470673b7249f6a125f6859336a47c8
Previously Tx domain rd was used in all cases above speed 0.
Coefficient optimization was only enabled for best and speed 0.
This patch selectively sets these features at other speed settings
based on block complexity.
For the Netflix and HD sets in particular the quality gains are
large compared to the speed hit. At speed 1 the average psnr
gain in the NF set is > 2.5% with one clip coming in at 18%
and some points almost 30%. Average gains for the lower
resolution test sets are around 1%.
The gains are biggest at low Q so some further optimization
may be possible.
Change-Id: I340376c7b2a78e5389a34b7ebdc41072808d0576
In the future this option will activate adaptive quantization special
for altref frames. Encoder will create the adaptive quantization map
on the basis of lookahead buffers similarity which is the estimate of
the future motion compensation performance.
Change-Id: Ia0088b3babb0f9a4899c79d8d819947ba5a03df2
Disabled the split mode while encoding 4k video to speed
up the encoder.
Borg test result on 4k set:
Overall PSNR: +0.029%; SSIM: +0.009%.
Average encoder speedup at speed 2 is 2.5%.
Change-Id: I1519c658f07c3ac838affbe5aff0ed9b94f3f8f4
Adjusted speed 2 features to speed up 4k video encoding.
BDBR results from borg test:
PSNR: +0.313%; SSIM: +0.268%.
Average speedup: 8.5%
Change-Id: I1e2695a01fb3f3817c1df4480e184c2aed8f2eba
this fixes a crash in vp9_dec_setup_mi() via
vp9_init_context_buffers() should decoding continue and the decoder
resyncs on a smaller frame
BUG=b/30593752
Change-Id: I9ce8d94abe89bcd058697e8bd8599690e61bd380
Bias towards base_mv and skip 1/4 pixel motion search when using base mv.
2~3% speed up for 2 spatial layers, 3~5% speed up for 3 spatial layers.
PSNR loss:
(2 layers) 0.07dB for gips_stationary, 0.04dB for gips_motion;
(3 layers) 0.07dB for gips_stationary, 0.06dB for gips_motion.
Change-Id: I773acbda080c301cabe8cd259f842bcc5b8bc999
Add option, for newmv-last, to limit the rd-threshold update for early exit,
under a source varianace condition.
This can improve visual quality in low texture moving areas,
like forehead/faces.
Also add bias against golden to improve the speed/fps,
will little/negligible loss in quality.
Only affects CBR mode, non-svc, non-screen-content.
Change-Id: I3a5229eee860c71499a6fd464c450b167b07534d
Changes the default recode rule for Speed 0 and best quality
from ALLOW_RECODE to ALLOW_RECODE_KFARFGF.
Tested on the NF, hdres, midres and lowres test sets, this setting
when combined with patch I40cb559... now performs "as well" in
metrics terms (in fact it came out a tiny amount better overall)
but encode time is 9.6% faster (measured as the average
from 27 mid rate local encodes on clips in the derf/lowres set.
Change-Id: I8c781c0cdfa3a9929cd9406d15582fce47d6ae3b
Allow recodes for the first inter frame in each arf group
even when the recode rule is set to ALLOW_RECODE_KFARFGF.
Small gains of 0.05%.
Change-Id: I40cb559d36a2bf0ebf5cf758c3f92e452b480577
This patch fixed a motion vector out of range bug:
vpxenc: ../libvpx/vp9/encoder/vp9_mcomp.c:69:
mv_cost: Assertion `mv->col >= -((1 << (11 + 1 + 2)) - 1) &&
mv->col < ((1 << (11 + 1 + 2)) - 1)' failed.
For blocks that returned without having full-pixel search, the original
MV limits were not restored, which caused the failure. Moved the set
MV limit function down to fix the bug.
Change-Id: Id7d798fc7214e95c6e4846c588f0233fcf1a4223
This patch fixed a motion vector(MV) out of range bug, which was caused
by not restoring the original values of the MV min/max thresholds after
the sub8x8 full pixel motion search. It occurred rarely and only was seen
while encoding a 4k clip for 200 frames.
BUG=webm:1271
Change-Id: Ibc4e0de80846f297431923cef8a0c80fe8dcc6a5
* changes:
Use common transpose for vpx_idct32x32_1024_add_neon
Use common transpose for vpx_idct8x8_[12|64]_add_neon
Use common transpose for vp9_iht8x8_add_neon
Use common transpose for vpx_idct16x16_[10|256]_add_neon
Increase the minimum distance.
Reduces the overshoot somewhat on some clips,
small gain in avgPSNR (~0.1%) on ytlive set.
Change-Id: Id5ddde20c2907dbdb536e79542eff775019c142b
Move best index into the token state. Shrink it down to one byte. This
is more cache friendly (access are group together) and uses less total
memory.
Results in 4% fewer cycles in optimize_b().
Change-Id: I75db484fb3dc82f59928d54b659d79c80ee40452
Shutdown all threads before reclaiming any memory. The frame-level
parallel decoder may access data from another worker.
BUG=webm:1259
Change-Id: I26856ebd1f77cc4a4545331baa19bbf3e01c4ea4
