The inverse 32x32 transform detects all zero entries and skips the
computations accordingly per 8 rows in the first 1-D operation. The
function vp9_short_idct10_32x32_add performs differently and is not
used anywhere, hence removed.
Change-Id: Ic4fad422debbde7b6b6ffed47c69fbd4268a906c
This commit provides special handle on 16x16 inverse 2D-DCT, where
only DC coefficient is quantized to be non-zero value.
Change-Id: I7bf71be7fa13384fab453dc8742b5b50e77a277c
This commit enables a special handle for the 8x8 inverse 2D-DCT,
where only DC coefficient is quantized to be non-zero. For bus_cif
at 2000 kbps, it provides about 1% speed-up at speed 0.
Change-Id: I2523222359eec26b144cf8fd4c63a4ad63b1b011
Add SSE2 implementation to handle the special case of inverse 2D-DCT
where only DC coefficient is non-zero.
Change-Id: I2c6a59e21e5e77b8cf39a4af5eecf4d5ade32e2f
Call the individually optimized horizontal and vertical functions. This
implementation abuses the temp buffer.
This will be replaced with a custom optimized function.
Over 2x speedup.
Change-Id: I5b908d2a73d264e9810d6022bbff73207a3055dd
This commit enables SSE2 implementation of 16x16 inverse ADST/DCT
hybrid transform. The runtime goes from 5742 cycles -> 1821 cycles.
This provides about 1% encoding speed-up at speed 0.
Change-Id: I1678d0988bf30b9efd524877705bbb3645edb17b
This commit enables SSE2 implementation of 8x8 inverse ADST/DCT
transform. The runtime goes from 1216 cycles -> 266 cycles.
For bus_cif at 2000 kbps, the overall runtime reduces from
253707ms -> 248430ms, i.e., 2% speed-up at speed 0.
Change-Id: Ib0372e17e9162d7b11a10d653b1c8be547c878fb
Super basic conversion from the other implementations. Any changes to
one should be trivial to copy over keep in sync.
Change-Id: I1720b4128e0aba4b2779e3761f6494f8a09d3ea8
Independent horizontal and vertical implementations.
Requires that blocks be built from 4x4 and [xy]_step_q4 == 16
6-10% improvement. CIF improved the least.
Change-Id: I137f5ceae4440adc0960bf88e4453e55a618bcda
Enable SSE2 4x4 inverse ADST/DCT transform. The runtime goes from
292 cycles down to 89 cycles. Running bus_cif at 2000 kbps, the
overall runtime of speed 0 goes from 301s to 295s (2% speed-up).
Change-Id: I24098136e7fee7ab2fbf1c11755bdf2ca37f3628
Where possible, do the 16 pixel wide filter while doing the horizontal
filtering pass. The same approach can be taken for the mbloop_filter
when that's implemented. Doing so on the vertical pass is a little more
involved, but possible.
Change-Id: I010cb505e623464247ae8f67fa25a0cdac091320
This commit enables 16x16 ADST/DCT forward hybrid transform using SSE2
operations. It reduces the runtime from 5433 cycles to 1621 cycles, at
no compression performance loss.
Change-Id: I75fd7f1984e9e28846af459f810ff0d6ae125230
- The vp9 mbfilter C code will branch on flat and mask. This CL
will perform both branches and combine the data. A later CL will
perform a check to see if all patch will take one branch.
- These functions are about 1.75 times faster than the C code on
Nexus 7.
PS #3
- Changed all functions to dub limit, blimit, and thresh from
vld {dx[]}, freeing up r4-r6.
- Changed code to use vbif to reduce one instruction and free
up a d register.
Change-Id: I028dae0e434dc9891c3677bdb182e201ffb04777
This probably has a mildly negative impact on performance, but will
(in future commits - or possibly merged with this one) allow SIMD
implementations of individual intra prediction functions. We may
perhaps want to consider having separate functions per txfm-size
also (i.e. 4x4, 8x8, 16x16 and 32x32 intra prediction functions for
each intra prediction mode), but I haven't played much with that
yet.
Change-Id: Ie739985eee0a3fcbb7aed29ee6910fdb653ea269
Encode time of bus (speed 0) 50 frames @ 1500kbps goes from 2min14.4 to
2min10.1, i.e. a 2.3% overall speed increase.
Change-Id: I3699580e74ec26c7d24e03681bc47ba25ee1ee87
Total encoding time for first 50 frames of bus (speed 0) @ 1500kbps
goes 2min34.8 to 2min14.4, i.e. a 10.4% overall speedup. The code is
x86-64 only, it needs some minor modifications to be 32bit compatible,
because it uses 15 xmm registers, whereas 32bit only has 8.
Change-Id: I2df53770c2e850813ffa713e1a91b45b0082b904
This commit enables SSE2 4x4 foward hybrid transform. The runtime
goes from 249 cycles down to 74 cycles. Overall around 2% speed-up
at no compression performance change.
Change-Id: Iad4d526346e05c7be896466c05500711bb763660
This commit replaces zrun_zbin_boost, a method of biasing non-zero
coefficients following runs of zero-coefficients to be rounded towards
zero, with an explicit skip-block choice in the RD loop.
The logic is basically that if individual coefficients should be rounded
towards zero (from a RD point of view), the trellis/optimize loop should
take care of it. If whole blocks should be zero (from a RD point of
view), a single RD check is much more efficient than a complete
serialization of the quantization loop.
Quality change: derf +0.5% psnr, +1.6% ssim; yt +0.6% psnr, +1.1% ssim.
SIMD for quantize will follow in a separate patch. Results for other
test sets pending.
Change-Id: Ife5fa641163ac5150ac428011e87188f1937c1f4
- Added vp9_loop_filter_horizontal_edge_neon and
vp9_loop_filter_vertical_edge_neon.
- The functions are based off the vp8 loopfilter
functions.
- Matches x86 md5 checksum.
Change-Id: Id1c4dddb03584227e5ecd29f574a6ac27738fdd0
Makes first 50 frames of bus @ 1500kbps encode from 3min22.7 to 3min18.2,
i.e. 2.3% faster. In addition, use the sub_pixel_avg functions to calc
the variance of the averaging predictor. This is slightly suboptimal
because the function is subpixel-position-aware, but it will (at least
for the SSE2 version) not actually use a bilinear filter for a full-pixel
position, thus leading to approximately the same performance compared to
if we implemented an actual average-aware full-pixel variance function.
That gains another 0.3 seconds (i.e. encode time goes to 3min17.4), thus
leading to a total gain of 2.7%.
Change-Id: I3f059d2b04243921868cfed2568d4fa65d7b5acd
This commit makes use of the butterfly structure to enable the sse2
version implementation of 8x8 ADST/DCT hybrid transform coding.
The runtime of hybrid transform module goes down from 1170 cycles
to 245 cycles. Overall speed-up around 1.5%.
Change-Id: Ic808ffd21ece8a9d0410d8c0243d7b6c28ac3b3f
Change vp9_block_error() to return a 64bit error variable, change all
callers to expect a 64bit return value (this will prevent overflows,
which we basically don't check for at all right now). Remove duplicate
block_error() function, which fixed that through truncation. Remove
old (incompatible) mmx/sse2 block_error SIMD versions and replace with
a new one that returns a 64bit value.
Encoding time of first 50 frames of bus @ 1500kbps goes from 3min29 to
3min23, i.e. a 3% overall speedup.
Change-Id: Ib71ac5508b5ee8a80f1753cd85d72df1629abe68
Encoding of bus @ 1500kbps (first 50 frames) goes from 3min57 to
3min35, i.e. approximately a 10.5% speedup. Note that the SIMD versions
which use a bilinear filter (x_offset & 7 || y_offset & 7) aren't
perfectly interleaved, and can probably be improved further in the
future. I've marked this with a few TODOs/FIXMEs in the code.
Change-Id: I5c9e900c0f0d32e431a50fecae213b510b2549f9
This commit makes use of dual fdct32x32 versions for rate-distortion
optimization loop and encoding process, respectively. The one for
rd loop requires only 16 bits precision for intermediate steps.
The original fdct32x32 that allows higher intermediate precision (18
bits) was retained for the encoding process only.
This allows speed-up for fdct32x32 in the rd loop. No performance
loss observed.
Change-Id: I3237770e39a8f87ed17ae5513c87228533397cc3
The encoding time for bus at CIF goes from 661s to 625s. This commit
also enabled unit test of sad8x4/4x8 in sad_test.cc.
Change-Id: If3d10ebb56bda584bdb69bcf056599d580b12cb1
The encoding time for bus at CIF goes from 661s to 625s. This commit
also enabled unit test of sad8x4/4x8 in sad_test.cc.
Change-Id: If3d10ebb56bda584bdb69bcf056599d580b12cb1
Modified to work with 8x8 blocks of memory. Will revisit
later for further optimizations. For the HD clip used, the
decoder improved by almost 20%.
Change-Id: Iaa4785be293a32a42e8db07141bd699f504b8c67
Modified to work with 8x8 blocks of memory. Will revisit
later for further optimizations. For the HD clip used, the
decoder improved my 20%.
Change-Id: Ia0057f55d66d1445882351ea6c43b595a5a980e5
This version of the loop filter supports non-4:2:0 subsampling and
a fourth plane, as well as changing the filtering order to be more
friendly to hardware implementations.
The filters are applied first to all vertical edges within the
64x64 SB, followed by the top horizontal edge and any internal
horizontal edges. Since filtering is applied on each 4x4 edge
serially, a dependency is created from filtering one block edge
to the next. It would be possible to remove this depencnecy by
building all filtering decisions from the unfiltered
reconstruction data.
Change-Id: I08f3e9683eb7bded8a76651cbc50fc0dfdd05fa7
This speed 1 - uses variance threshold stolen from static-thresh
to determine split. Any superblock with greater than the variance
set by static thresh * quantizer index squared is split. In addition
transform size is set to largest size less than or equal to partition
size, sub pixel filter is set to normal, and only 12 modes are used
at all.
Change-Id: If7a2858ee70f96d1eb989c04fd87a332b147abef
Move 4x4/4x8/8x4 partition coding out of experimental list.
This commit fixed the unit test failure issues. It also resolved
the merge conflicts between 4x4 block level partition and iterative
motion search for comp_inter_inter.
Change-Id: I898671f0631f5ddc4f5cc68d4c62ead7de9c5a58
This patch eliminates the intermediate diff buffer usage by
combining the short idct and the add residual into one function.
The encoder can use the same code as well.
Change-Id: I296604bf73579c45105de0dd1adbcc91bcc53c22
This patch eliminates the intermediate diff buffer usage by
combining the short idct and the add residual into one function.
The encoder can use the same code as well.
Change-Id: Iacfd57324fbe2b7beca5d7f3dcae25c976e67f45
These building blocks enable rate-distortion optimization search
over block sizes of 8x4 and 4x8. Need to convert them into mmx/sse
forms.
Change-Id: I570ea2d22d14ceec3fe3575128d7dfa172a577de
This patch eliminates the intermediate diff buffer usage by
combining the short idct and the add residual into one function.
The encoder can use the same code as well.
Change-Id: Iea7976b22b1927d24b8004d2a3fddae7ecca3ba1
This patch eliminates the intermediate diff buffer usage by
combining the short idct and the add residual into one function.
The encoder can use the same code as well.
Change-Id: I4ea09df0e162591e420d869b7431c2e7f89a8c1a
In current code, motion vectors got from single prediction mode are used
in compound prediction mode directly. These motion vectors may not give
accurate prediction since they are searched independently. In this patch,
we took Pascal's suggestion, and did joint motion search in compound
prediction mode to find better motion vectors in this situation.
Test results:
Overall PSNR: 0.570%(derf), 0.918%(stdhd);
SSIM: 0.572%(derf), 1.009%(stdhd);
The encoder is a little slower. This can be improved since some c
code is used in motion search.
Change-Id: Ib30c9240f6c56c9b070867b4ca89412a76d9f3c6
All members can be referenced from their per-plane counterparts, and
removes assumptions about 24 blocks per macroblock.
Change-Id: I7ff2fa72d22c29163eb558981c8193765a8113d9
This originally was "Removed update_blockd_bmi()". Now,
this patch removed bmi from blockd and uses the bmi found
in mode_info_context. Eliminates unnecessary bmi copies between
blockd and mode_info_context.
Change-Id: I287a4972974bb363f49e528daa9b2a2293f4bc76
All members can be referenced from their per-plane counterparts, and
removes assumptions about 24 blocks per macroblock.
Change-Id: I593fb0715e74cd84b48facd1c9b18c3ae1185d4b
First in a series of commits making certain MACROBLOCK members
addressable per-plane. This commit also refactors the block subtraction
functions vp9_subtract_b, vp9_subtract_sby_c, etc to be
loops-over-planes and variable subsampling aware.
Change-Id: I371d092b914ae0a495dfd852ea1a3d2467be6ec3
Mostly for cleanup purposes. Now we should be able to rework
the encoder/decoder to use a common idct/add function.
Change-Id: I1597cc59812f362ecec0a3493b6101a6cc6fa7ff
