Commit f0e0fd51f was a bit over-zealous in removing a call to
X509_STORE_CTX_cleanup(). The call in question was in a loop and was
required to cleanup resources used on each iteration of the loop. Removing
this resulted in a memory leak.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Make OBJ_name_cmp internal
Rename idea_xxx to IDEA_xxx
Rename get_rfc_xxx to BN_get_rfc_xxx
Rename v3_addr and v3_asid functions to X509v3_...
Reviewed-by: Richard Levitte <levitte@openssl.org>
Recently, OCSP_basic_verify() was changed to always return 0 on error,
when it would previously return 0 on error and < 0 on fatal error.
This restores the previous semantics back.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Make X509_OBJECT, X509_STORE_CTX, X509_STORE, X509_LOOKUP,
and X509_LOOKUP_METHOD opaque.
Remove unused X509_CERT_FILE_CTX
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Dr. Stephen Henson <steve@openssl.org>
To begin with, the default should have been the import library, not
the DLL itself. However, we don't know what directory it's installed
in either way, so we may as well demand the full path from the user
Reviewed-by: Matt Caswell <matt@openssl.org>
In most cases we expect that people will be using shared libraries not
static ones, therefore we make that the default.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Travis identified a problem with freeing the ex_data locks which wasn't
quite right in ff2344052. Trying to fix it identified a further problem:
the ex_data locks are cleaned up by OPENSSL_cleanup(), which is called
explicitly by CRYPTO_mem_leaks(), but then later the BIO passed to
CRYPTO_mem_leaks() is freed. An attempt is then made to use the ex_data
lock already freed.
Reviewed-by: Tim Hudson <tjh@openssl.org>
no-stdio does not work with the apps. Since the tests also need the apps
it doesn't support that either. Therefore we disable building of both.
no-autoalginit is not compatible with the apps because it requires explicit
loading of the algorithms, and the apps don't do that. Therefore we disable
building the apps for this option. Similarly the tests depend on the apps
so we also disable the tests. Finally the whole point about no-autoalginit
is to avoid excessive executable sizes when doing static linking. Therefore
we disable "shared" if this option is selected.
Reviewed-by: Richard Levitte <levitte@openssl.org>
During Configure we attempt to check the kernel version of this platform
to see whether we can compile the AFALG engine. If the kernel version
looks recent enough then we enable AFALG. However when we compile
e_afalg.c we check the version of the linux headers. If there is a
mismatch between the linux headers and the currently running kernel then
we don't compile the AFLAG engine and continue. This was causing a link
error.
Reviewed-by: Richard Levitte <levitte@openssl.org>
These algorithms are fundamental and extensively used. The "no-" options
do not work either in 1.1.0 or in other released branches. Therefore the
ability to disable them should be removed.
Reviewed-by: Richard Levitte <levitte@openssl.org>
The check_defer() function was used to ensure that EVP_cleanup() was always
called before OBJ_cleanup(). The new cleanup code ensures this so it is
no longer needed.
Remove obj_cleanup() call in OID config module: it is not needed
any more either.
Reviewed-by: Matt Caswell <matt@openssl.org>
When compressing, the output / input is a binary format, not a text
format like BASE64. This is important on Windows, where a ^Z in a
text file is seen as EOF, and there could be a ^Z somewhere in a
compressed file, cutting it short as input.
Reviewed-by: Matt Caswell <matt@openssl.org>
The handling was Unix centric, already in Configure. Change that to
just collect the value and let the build file templates figure out
what to do with it.
Reviewed-by: Matt Caswell <matt@openssl.org>
Instead of absolute hard coding of the libz library name, have it use
the macro LIBZ, which is set to defaults we know in case it's
undefined.
This allows our configuration to set something that's sane on current
or older platforms, and allows the user to override it by defining
LIBZ themselves.
Reviewed-by: Matt Caswell <matt@openssl.org>
The macros ZLIB and ZLIB_SHARED weren't appropriately defined,
deviating wrongly from how they worked in earlier OpenSSL versions.
So, restore it so that ZLIB is defined if configured "enable-zlib" and
so that ZLIB and ZLIB_SHARED are defined if configured
"enable-zlib-dynamic".
Additionally, correct the interpretation of the --with-zlib-lib value
on Windows and VMS, where it's used to indicate the actual zlib
zlib library file / logical name, as that can differ depending on zlib
version and packaging on those platforms.
Finally for Windows and VMS, we also define the macro LIBZ with that
file name / logical name when configured "zlib-dynamic", so the
compression unit can pick it up and use it.
Reviewed-by: Matt Caswell <matt@openssl.org>
There is a preference for suffixes to indicate that a function is internal
rather than prefixes. Note: the suffix is only required to disambiguate
internal functions and public symbols with the same name (but different
case)
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
The no-op de-init macros may fail because of extraneous ";", so we use
a slightly different construct instead.
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
libssl needs to have access to some internal libcrypto symbols.
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
There was a lot of naming inconsistency, so we try and standardise on
one form.
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
CONF_modules_free() should not be called expicitly - we should leave
auto-deinit to clean this up instead.
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
ENGINE_cleanup() should not be called expicitly - we should leave
auto-deinit to clean this up instead.
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
OBJ_cleanup() should not be called expicitly - we should leave
auto-deinit to clean this up instead.
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
EVP_cleanup() should not be called expicitly - we should leave
auto-deinit to clean this up instead.
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
BIO_sock_cleanup() should not be called expicitly - we should leave
auto-deinit to clean this up instead.
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
CRYPTO_cleanup_all_ex_data() should not be called expicitly - we should
leave auto-deinit to clean this up instead.
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
RAND_cleanup() should not be called expicitly - we should leave
auto-deinit to clean this up instead.
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
The conditional compile logic wasn't quite right in speed.c for when
both OPENSSL_NO_DSA and OPENSSL_NO_EC are defined.
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
SSL_COMP_free_compression_methods() should not be called expicitly - we
should leave auto-deinit to clean this up instead.
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
ERR_free_strings() should not be called expicitly - we should leave
auto-deinit to clean this up instead.
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
COMP_zlib_cleanup() should not be called expicitly - we should leave
auto-deinit to clean this up instead.
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Setting the debug callback on the in and out BIOs were done too early.
No debug callback was set on the zlib filter BIO.
Reviewed-by: Tim Hudson <tjh@openssl.org>
Add an accessor for SSL_CTX.
Since libssl was made opaque, there is no way for users to access the
cipher_list, while users can set the cipher_list by
SSL_CTX_set_cipher_list().
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
The function pqueue_print is not exported and is never called. Therefore
we should delete it.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
When a file is opened with BIO_new_file(), make sure that the internal
mode TEXT vs BINARY setting reflects what's given in the mode string.
Reviewed-by: Andy Polyakov <appro@openssl.org>
Code without PEDANTIC has intentional "undefined" behaviour. To get best
coverage for both PEDANTIC and non-PEDANTIC codepaths, run the sanitizer
builds in two different configurations:
1) Without PEDANTIC but with alignment checks disabled.
2) With PEDANTIC.
To not overload Travis too much, run one build with clang and the other
with gcc (chosen at random).
Also remove a micro-optimization in CAST code to be able to
-fsanitize=shift. Whether shift sanitization is meaningful for crypto or
an obstacle is debatable but since this appears to be the only offender,
we might as well keep the check for now.
Reviewed-by: Richard Levitte <levitte@openssl.org>
In Travis, do --strict-warnings on BUILDONLY configurations. This
ensures that the tests run even if --strict-warnings fail, and avoids
hiding unrelated test failures.
Reviewed-by: Richard Levitte <levitte@openssl.org>
The simple reason is that the pre-generated files are mainly for Unix.
The VMS variants look slightly different, so comparing will always fail.
Reviewed-by: Emilia Käsper <emilia@openssl.org>
A number of new functions have been added following the DH and DH_METHOD
opacity commits. This commit provides documentation for those functions.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Move the dh_method structure into an internal header file and provide
relevant accessors for the internal fields.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Move the dh_st structure into an internal header file and provide
relevant accessors for the internal fields.
Reviewed-by: Richard Levitte <levitte@openssl.org>
As it turns out branch hints grew as kind of a misconception. In
addition their interpretation by GNU assembler is affected by
assembler flags and can end up with opposite meaning on different
processors. As we have to loose quite a lot on misinterprerations,
especially on newer processors, we just omit them altogether.
Reviewed-by: Tim Hudson <tjh@openssl.org>
Since NDEBUG is defined unconditionally on command line for release
builds, we can omit *_DEBUG options in favour of effective "all-on"
in debug builds exercised though CI.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Emilia Käsper <emilia@openssl.org>
Without proper cleanup after DLL link failure second attempt to
run nmake would actually proceed and failure will be "shifted" to
run time. This is because libcrypto.lib import library is generated
even if DLL link fails.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Suppress CT callbacks with aNULL or PSK ciphersuites that involve
no certificates. Ditto when the certificate chain is validated via
DANE-TA(2) or DANE-EE(3) TLSA records. Also skip SCT processing
when the chain is fails verification.
Move and consolidate CT callbacks from libcrypto to libssl. We
also simplify the interface to SSL_{,CTX_}_enable_ct() which can
specify either a permissive mode that just collects information or
a strict mode that requires at least one valid SCT or else asks to
abort the connection.
Simplified SCT processing and options in s_client(1) which now has
just a simple pair of "-noct" vs. "-ct" options, the latter enables
the permissive callback so that we can complete the handshake and
report all relevant information. When printing SCTs, print the
validation status if set and not valid.
Signed-off-by: Rob Percival <robpercival@google.com>
Reviewed-by: Emilia Käsper <emilia@openssl.org>
The original check for != SSL_VERIFY_NONE can give surprising results
when flags SSL_VERIFY_PEER is not set, but other flags are. Note
that SSL_VERIFY_NONE (0) is not a flag bit, it is rather the absense
of all other flag bits.
Signed-off-by: Rob Percival <robpercival@google.com>
Reviewed-by: Emilia Käsper <emilia@openssl.org>
Free up parsed X509_NAME structure if the CertificateRequest message
contains excess data.
The security impact is considered insignificant. This is a client side
only leak and a large number of connections to malicious servers would
be needed to have a significant impact.
This was found by libFuzzer.
Reviewed-by: Emilia Käsper <emilia@openssl.org>
Reviewed-by: Stephen Henson <steve@openssl.org>
The environment variables TOP, SRCTOP, BLDTOP, ... are used to affect
the testing framework. However, subprocesses may want to use them as
well, and therefore need their values corrected when we move to a
different directory.
Reviewed-by: Emilia Käsper <emilia@openssl.org>
We used to symlink generate_ssl_tests.pl to the build directory.
Now that the build scripts look for sources in both directories, this
is no longer necessary (see commit
fbd361eaf8).
Reviewed-by: Richard Levitte <levitte@openssl.org>
Move rsa_meth_st away from public headers.
Add RSA_METHOD creator/destructor functions.
Add RSA_METHOD accessor/writer functions.
Adapt all other source to use the creator, destructor, accessors and writers.
Reviewed-by: Matt Caswell <matt@openssl.org>
Move rsa_st away from public headers.
Add accessor/writer functions for the public RSA data.
Adapt all other source to use the accessors and writers.
Reviewed-by: Matt Caswell <matt@openssl.org>
When config'd with "no-async" the ASYNC_NULL implementation is used, so
async symbols still exist. We should still init the NULL implementation so
that when we get the async ctx it is NULL rather than undefined.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Currently, SSL tests are configured via command-line switches to
ssltest.c. This results in a lot of duplication between ssltest.c and
apps, and a complex setup. ssltest.c is also simply old and needs
maintenance.
Instead, we already have a way to configure SSL servers and clients, so
we leverage that. SSL tests can now be configured from a configuration
file. Test servers and clients are configured using the standard
ssl_conf module. Additional test settings are configured via a test
configuration.
Moreover, since the CONF language involves unnecessary boilerplate, the
test conf itself is generated from a shorter Perl syntax.
The generated testcase files are checked in to the repo to make
it easier to verify that the intended test cases are in fact run; and to
simplify debugging failures.
To demonstrate the approach, min/max protocol tests are converted to the
new format. This change also fixes MinProtocol and MaxProtocol
handling. It was previously requested that an SSL_CTX have both the
server and client flags set for these commands; this clearly can never work.
Guide to this PR:
- test/ssl_test.c - test framework
- test/ssl_test_ctx.* - test configuration structure
- test/handshake_helper.* - new SSL test handshaking code
- test/ssl-tests/ - test configurations
- test/generate_ssl_tests.pl - script for generating CONF-style test
configurations from perl inputs
Reviewed-by: Richard Levitte <levitte@openssl.org>
It was harmless in this case, but best avoid the annoying warnings.
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
Previously, we updated the static libraries (libcrypto.a on Unix,
libcrypto.lib on Windows) with all the object files, regardless of if
they were rebuilt or not. With this change, we only update them with
the object files were rebuilt.
NOTE: this does not apply on VMS, as the expansion of $? may be too
large for a command line.
Reviewed-by: Andy Polyakov <appro@openssl.org>
A new X509_VERIFY_PARAM_set_auth_level() function sets the
authentication security level. For verification of SSL peers, this
is automatically set from the SSL security level. Otherwise, for
now, the authentication security level remains at (effectively) 0
by default.
The new "-auth_level" verify(1) option is available in all the
command-line tools that support the standard verify(1) options.
New verify(1) tests added to check enforcement of chain signature
and public key security levels. Also added new tests of enforcement
of the verify_depth limit.
Updated documentation.
Reviewed-by: Dr. Stephen Henson <steve@openssl.org>
Numerous fixups based on feedback of the DSA opacity changes.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Stephen Henson <steve@openssl.org>
A number of getters/setters have been added for examining DSA objects, as
well as a whole set of functions for creating and buildingup DSA_METHODs.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Stephen Henson <steve@openssl.org>
Move the dsa_method structure out of the public header file, and provide
getter and setter functions for creating and modifying custom DSA_METHODs.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Stephen Henson <steve@openssl.org>
Move the dsa_st structure out of the public header file. Add some accessor
functions to enable access to the internal fields, and update all internal
usage to use the new functions.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Stephen Henson <steve@openssl.org>
Within OpenSSL::Test, all commands end up existing in two variants,
one that has redirections that are needed internally to work well
together with the test harness, and one without those redirections.
Depending on what the result is going to be used for, the caller may
want one for or the other, so we give them the possibility.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Currently on every BIO mem read operation the remaining data is reallocated.
This commit solves the issue.
BIO mem structure includes additional pointer to the read position.
On every read the pointer moves instead of reallocating the memory for the remaining data.
Reallocation accures before write and some ioctl operations, if the read pointer doesn't point on the beginning of the buffer.
Also the flag is added to rewind the read pointer without losing the data.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
InitOnceExecuteOnce returns nonzero on success:
MSDN: "If the function succeeds, the return value is nonzero."
So return 1 if it is nonzero, 0 others.
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
The logic to find out of there are any .d files newer than Makefile is
sound. Checking the result was less so.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Don't decode a public key in X509_PUBKEY_get0(): that is handled when
the key is parsed using x509_pubkey_decode() instead.
Reviewed-by: Emilia Käsper <emilia@openssl.org>
Reverts commit 087ca80ad8
Instead of battling the odd format of argv given to main() in default
P64 mode, tell the compiler to make it an array of 64-bit pointers
when compiling in P64 mode.
A note is added in NOTES.VMS regarding minimum DEC C version.
Reviewed-by: Andy Polyakov <appro@openssl.org>
- In Configure, register the perl interpreter used to run Configure,
so that's the one being used throughout instead of something else
that Configure happens to find. This is helpful for using a perl
version that's not necessarely first in $PATH:
/opt/perl/5.22.1/bin/perl ./Configure
- Make apps/tsget a generated file, just like apps/CA.pl, so the
perl interpreter registered by Configure becomes the hashbang path
instead of a hardcoded /usr/bin/perl
Reviewed-by: Andy Polyakov <appro@openssl.org>
This minimizes inter-block overhead. Performance gain naturally
varies from case to case, up to 10% was spotted so far. There is
one thing to recognize, given same circumstances gain would be
higher faster computational part is. Or in other words biggest
improvement coefficient would have been observed with assembly.
Reviewed-by: Emilia Käsper <emilia@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
Because some operating systems have executable extensions, typically
".exe", we need to append it when looking for files in test() and
app() (or rather, their subroutines).
Reviewed-by: Rich Salz <rsalz@openssl.org>
CRYPTO_mem_leaks attempts to adjust the count of bytes leaks to not
include the BIO that is being used to print the results out. However this
does not work properly. In all internal cases we switch off recording
the memory allocation during creation of the BIO so it makes no difference.
In other cases if the BIO allocates any additional memory during
construction then the adjustment will be wrong anyway. It also skips over
the BIO memory during print_leak anyway, so the BIO memory is never
added into the total. In other words this was broken in lots of ways and
has been since it was first added.
The simplest solution is just to make it the documented behaviour that
you must turn off memory logging when creating the BIO, and remove all
the adjustment stuff completely. The adjustment code was only ever in
master and never made it to a release branch so there is no loss of
functionality.
This commit also fixes a compilation failure when using
enable-crypto-mdebug.
Reviewed-by: Rich Salz <rsalz@openssl.org>
The argument 'argv' in 'main' is a short pointer to a short pointer on
VMS, regardless of initial pointer size. We must therefore make sure
that 'copy_argv' gets a 32-bit pointer for argv, and that the copied
argv is used for the rest of main().
This introduces the local type argv_t, which will have correct pointer
size in all cases (and be harmless on all other platforms) as well as
the macro Argv, which is defined as 'copied_argv' or 'argv', as the
case may be.
Reviewed-by: Andy Polyakov <appro@openssl.org>
setbuf() is only for 32-bit pointers. If compiled with /POINTER_SIZE=64,
we get a nasty warning about possible loss of data. However, since
the only pointer used in the call is a FILE *, and the C RTL shouldn't
give us a pointer above the first 4GB, it's safe to turn off the
warning for this call.
Reviewed-by: Andy Polyakov <appro@openssl.org>
On VMS, the C compiler can work with 32-bit and 64-bit pointers, and
the command line determines what the initial pointer size shall be.
However, there is some functionality that only works with 32-bit
pointers. In this case, it's gethostbyname(), getservbyname() and
accompanying structures, so we need to make sure that we define our
own pointers as 32-bit ones.
Furthermore, there seems to be a bug in VMS C netdb.h, where struct
addrinfo is always defined with 32-bit pointers no matter what, but
the functions handling it are adapted to the initial pointer size.
This leads to pointer size warnings when compiling with
/POINTER_SIZE=64. The workaround is to force struct addrinfo to be
the 64-bit variant if the initial pointer size is 64.
Reviewed-by: Andy Polyakov <appro@openssl.org>
If the command file that app(), test(), perlapp(9 and perltest() are
looking for doesn't exist in the build tree, look for it in the source
tree as well.
Reviewed-by: Emilia Käsper <emilia@openssl.org>
Since OpenSSL::Test only redirects stderr to /dev/null when being run
through non-verbose test harness, this change allows the stderr output
to be displayed when verbosity is requested.
Reviewed-by: Emilia Käsper <emilia@openssl.org>
Cache the decoded public key when an X509_PUBKEY structure is initially
parsed so no locking is required. Ignore any decode errors.
When an application calls X509_PUBKEY_get0() subsequently it will either
get the cached key or the decode operation will be repeated which will
return an appropriate error.
Reviewed-by: Rich Salz <rsalz@openssl.org>
BIO_f_linebuffer() is now built by default instead of just on VMS, but
the prototype in the header was still only available on VMS.
Reviewed-by: Rich Salz <rsalz@openssl.org>
There are rare cases when an object file will only be used when
building a shared library. To enable this, we introduce
SHARED_SOURCE:
SHARED_SOURCE[libfoo]=dllmain.c
Reviewed-by: Andy Polyakov <appro@openssl.org>
Also, have it always be built, even though it's only (currently) used
on VMS. That will assure it will get the same changes as all others.
Reviewed-by: Matt Caswell <matt@openssl.org>
Previously, it was sufficient to have certSign in keyUsage when the
basicConstraints extension was missing. That is still accepted in
a trust anchor, but is no longer accepted in an intermediate CA.
Reviewed-by: Rich Salz <rsalz@openssl.org>
The API contract is more tight than was previously documented -- the returned
string must be NUL-terminated, and the supplied buffer includes space for
the trailing NUL, so the maximum length that can be read in is reduced.
Clarify that the NUL is not included in the returned length, and fix the
spelling of "NUL-terminated" in a nearby spot.
Adjust punctuation to make a modest improvement to the grammar.
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
The SSL, SSL_CTX, and SSL_SESSION indices were being referenced
incorrectly in the "_get_ex_new_index" functions.
Remove the STORE EX_DATA index; that functionality is gone.
Reviewed-by: Emilia Käsper <emilia@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
The warning MAYLOSEDATA3 is one you will always get when compiling
source that calculates the difference between two pointers with
/POINTER_SIZE=64.
The reason is quite simple, ptrdiff_t is always a 32-bit integer
regardless of pointer size, so the result of 'ptr1 - ptr2' can
potentially be larger than a 32-bit integer. The compiler simply
warns you of that possibility.
However, we only use pointer difference within objects and strings,
all of them well within 2^32 bytes in size, so that operation is
harmless with our source, and we can therefore safely turn off that
warning.
Reviewed-by: Rich Salz <rsalz@openssl.org>
The private key is a scalar and should be sized by the order, not the
degree. See RFC 5915.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Emilia Käsper <emilia@openssl.org>
Move the the BIO_METHOD and BIO structures into internal header files,
provide appropriate accessor methods and update all internal code to use
the new accessors where appropriate.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Session resumption involves a version check, so version negotiation must
happen first. Currently, the DTLS implementation cannot do session
resumption in DTLS 1.0 because the ssl_version check always checks
against 1.2.
Switching the order also removes the need to fixup ssl_version in DTLS
version negotiation.
Signed-off-by: Kurt Roeckx <kurt@roeckx.be>
Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
RT: #4392, MR: #2452
We now send the highest supported version by the client, even if the session
uses an older version.
This fixes 2 problems:
- When you try to reuse a session but the other side doesn't reuse it and
uses a different protocol version the connection will fail.
- When you're trying to reuse a session with an old version you might be
stuck trying to reuse the old version while both sides support a newer
version
Signed-off-by: Kurt Roeckx <kurt@roeckx.be>
Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
GH: #852, MR: #2452
According to documentation, perl's Math::BigInt does floored division,
i.e. the bdiv function does 1 / -4 = -1. OpenSSL's BN_div, as well as
bc, do truncated division, i.e. 1 / -4 = 0.
We need to compensate for that difference in test/recipes/bc.pl to
make sure to verify the bntest results under its own conditions, by
dividing the absolute values of the given numbers and fixup the
result's negativity afterwards.
Closes RT#4485
Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
These logical names are used to make the C RTL change certain
behaviors, sometimes to make it act more like Unix. While they can
make life easier in some cases, they can be disruptive as well. When
building and testing OpenSSL, the latter is the case, so we ask people
to avoid using them.
Reviewed-by: Tim Hudson <tjh@openssl.org>
On Windows and Unix, the staging directory $(DESTDIR) can simply be
prepended to the installation directory. An attempt was made to do
something similar on VMS, but that ended up being a half measure
solution. Instead of that, simply use the staging directory as a
prefix under which [.OPENSSL-INSTALL] and [.OPENSSL-COMMON] will hold
the two directory trees that should end up in the directories
indicated by --prefix and --openssldir, and finish the installation
with appropriate instructions on what to do next.
Reviewed-by: Rich Salz <rsalz@openssl.org>
- on VMS, SYS$COMMON:[SSL] is already used as installation directory
by HP SSL, so we make our default for --openssldir
SYS$COMMON:[OPENSSL-COMMON] instead.
- Updated notes on default installation dirs fir Unix and Windows
Reviewed-by: Rich Salz <rsalz@openssl.org>
In this OpenSSL version, we deliver engines with lower case symbol
names. The DSO symbol finder must be updated to allow for mixed case
symbols or it won't fine them.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Sometimes, you might end up with a rather long compile line due to
excessively long /INCLUDE directories. Compensate for it by making
a temporary logical name with them and using said logical name as
/INCLUDE argument.
A note was added to NOTES.VMS regarding these limitations.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Instead of have every DSO_METHOD_xxx in all platforms, ensure that only
one DSO_METHOD_openssl is available on all platforms.
Reviewed-by: Tim Hudson <tjh@openssl.org>
BIO_new, etc., don't need a non-const BIO_METHOD. This allows all the
built-in method tables to live in .rodata.
Reviewed-by: Richard Levitte <levitte@openssl.org>
On VMS, we downcase option names, which means that config names are
downcased as well, so they need to be downcased in the target table to
be found.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Allows CONF files for certificate requests to specify that a pre-
certificate should be created (see RFC6962).
Reviewed-by: Dr. Stephen Henson <steve@openssl.org>
In constructions such as 'for x in $(MAKEVAR); do ...', there's the
possibility that $(MAKEVAR) is en empty value. Some shells don't like
that, so introduce a dummy value that gets discarded:
for x in dummy $(MAKEVAR); do
if [ "$$x" = "dummy" ]; then continue; fi
Closes RT#4459
Reviewed-by: Rich Salz <rsalz@openssl.org>
utils/mkrc.pl was added a while ago as a better generator for the
Windows DLL resource file. Finalize the change by removing the
ms/version32.rc generator from Configure and adding resource file
support using mkrc.pl in Configurations/windows-makefile.pl
Reviewed-by: Andy Polyakov <appro@openssl.org>
The mk1mf build for the VC-WIN* targets is broken and the unified
scheme works well enough, so we clean out the old.
Reviewed-by: Andy Polyakov <appro@openssl.org>
* Clear proposed, along with selected, before looking at ClientHello
* Add test case for above
* Clear NPN seen after selecting ALPN on server
* Minor documentation updates
Reviewed-by: Emilia Käsper <emilia@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
Don't have #error statements in header files, but instead wrap
the contents of that file in #ifndef OPENSSL_NO_xxx
This means it is now always safe to include the header file.
Reviewed-by: Richard Levitte <levitte@openssl.org>
By default you get 0.9 which isn't widely available.
But we use HTTP/1.0 for now.
Courtesy beusink@users.github.com
Reviewed-by: Tim Hudson <tjh@openssl.org>
One of the 'generate' targets depended on $(SRCDIR)/apps/progs.h,
which depended on... nothing. This meant it never got regenerated
once it existed, regardless of need. Of course, we could have it
depend on all the files checked to generate it, but they also depend
on progs.h, so we'd end up getting cricular dependencies, which makes
make unhappy.
Furthermore, and this applies for the other generated files, having
them as targets means that they may be regenerated on the fly in some
cases, and since they get written to the source tree, this isn't such
a good idea if that tree is read-only (which is a possible situation
in an out-of-tree build).
So, we move all the actions to the 'generate' targets themselves, thus
making sure they get regenerated in a controlled manner and regardless
of dependencies.
Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
Some implementations of sed require a newline before an ending '}'.
The easier method is to replace that sed command with the
corresponding perl command.
Closes RT#4448
Reviewed-by: Rich Salz <rsalz@openssl.org>
Depending on what has been built so far, all .d files may not be
present and 'find' will exit with non-zero exit code. This isn't a
bother for us but may break make, so clear the exit code with an added
'exit 0'.
Closes RT#4444
Reviewed-by: Rich Salz <rsalz@openssl.org>
Don't free up passed EVP_MD_CTX in ASN1_item_sign_ctx(). This
simplifies handling and retains compatiblity with previous behaviour.
PR#4446
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Stephen Henson <steve@openssl.org>
generatesrc() did already receive dependency information, but never
used it, and never really needed to... until now.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Instead of relying on the '-nt' test operator, which doesn't exist
everywhere, use find's '-newer' to find out if any of the known .d
files is newer than Makefile.
Closes RT#4444
Reviewed-by: Andy Polyakov <appro@openssl.org>
The no-deprecated build was failing because afalg was relying on a
transitive include that does not exist in a no-deprecated build.
Reviewed-by: Rich Salz <rsalz@openssl.org>
$? in perl gets the status value from wait(2), which is a word with
the exit code in the upper half and the number of a raised signal in
the lower half. OpenSSL::Test::run() ignored the signal half up until
now.
With this change, we recalculate an exit code the same way the Unix
shells do, using this formula:
($? & 0x7f) ? ($? & 0x7f)|0x80 : ($? >> 8);
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Emilia Käsper <emilia@openssl.org>
mkdef.pl was not detecting no-comp functions. This updates the header file
so that mkdef.pl detects that no-comp applies, and the functions are marked
accordingly.
Reviewed-by: Richard Levitte <levitte@openssl.org>
If a call to EVP_DecryptUpdate fails then a memory leak could occur.
Ensure that the memory is freed appropriately.
Issue reported by Guido Vranken.
Reviewed-by: Richard Levitte <levitte@openssl.org>
There is a potential double free in EVP_DigestInit_ex. This is believed
to be reached only as a result of programmer error - but we should fix it
anyway.
Issue reported by Guido Vranken.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Don't refer to INSTALL files that don't exist any more.
Make it clear that the libssl and libcrypto libraries may be named
differently on different platforms.
Reviewed-by: Rich Salz <rsalz@openssl.org>
On Windows, we set INSTALLTOP to default as follows:
VC-WIN32:
PREFIX: %ProgramFiles(x86)%\OpenSSL
OPENSSLDIR: %CommonProgramFiles(x86)%\SSL
VC-WIN64*:
PREFIX: %ProgramW6432%\OpenSSL
OPENSSLDIR: %CommonProgramW6432%\SSL
Should those environment variables be missing, the following is used
as fallback:
PREFIX: %ProgramFiles%\OpenSSL
OPENSSLDIR: %CommonProgramFiles%\SSL
Reviewed-by: Andy Polyakov <appro@openssl.org>
This is a living document, everyone is encouraged to add to it.
Implementation details as well as broader implementation philosophy
has a place here.
I'm starting with documentation of the how conditions in build.info
files are treated.
Reviewed-by: Rich Salz <rsalz@openssl.org>
This is only enabled when the environment variable
CONFIGURE_DEBUG_BUILDINFO is defined. This will cause every line in
every build.info file to be displayed, along with the content of the
skip stack before and after parsing. This can be a very powerful tool
to see that all conditions are working as expected.
Reviewed-by: Rich Salz <rsalz@openssl.org>
In most builds, we can assume that engines live in the build tree
subdirectory "engines". This was hard coded into the tests that use
the engine ossltest.
However, that hard coding is tedious, it would need to be done in
every test recipe, and it's an incorrect assumption in some cases.
This change has us play it safe and let the build files tell the
testing framework where the engines are.
Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
Some platforms claim to be POSIX but their getcontext() implementation
does not work. Therefore we update the ASYNC_is_capable() function to test
for this.
RT#4366
Reviewed-by: Richard Levitte <levitte@openssl.org>
util/mkdef.pl assumes it knows what the resulting library name will
be. Really, it shouldn't, but changing it will break classic native
Windows builds, so we leave it for now and change the LIBRARY line
externally when needed instead.
Reviewed-by: Matt Caswell <matt@openssl.org>
- Remove duplicate entry
- Add author for SSL_CIPHER query functions
- Note HKDF support in CHANGES and NEWS
[ci skip]
Reviewed-by: Richard Levitte <levitte@openssl.org>
Normally we always refer to source files relative to $SRCDIR in Makefiles.
However the reference to unix-Makefile.tmpl was using a fully expanded
absolute path. This can cause problems for Mingw.
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
We don't currently support cross-compiling of the afalg engine. However
we were failing to explicitly mark it as disabled during Configure leading
to a failed build.
Reviewed-by: Richard Levitte <levitte@openssl.org>
TLSProxy starts s_server and specifies the number of client connects
it should expect. After that s_server is supposed to close down
automatically. However, if another test is then run then TLSProxy
will start a new instance of s_server. If the previous instance
hasn't closed down yet then the new instance can fail to bind to
the socket.
Reviewed-by: Richard Levitte <levitte@openssl.org>
In unix-Makefile.tmpl, this construction has been used a few times
if ! something; then ...
It seems, though, that some shells do not understand !, so these need
to be changed.
Reviewed-by: Rich Salz <rsalz@openssl.org>
This commit adds the general verify options of ocsp, verify,
cms, etc. to the openssl timestamping app as suggested by
Stephen N. Henson in [openssl.org #4287]. The conflicting
"-policy" option of "openssl ts" has been renamed to
"-tspolicy". Documentation and tests have been updated.
CAVE: This will break code, which currently uses the "-policy"
option.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
There are internal dependencies between the various cleanup functions.
This re-orders things to try and get that right.
Reviewed-by: Richard Levitte <levitte@openssl.org>
OBJ_cleanup() doesn't always get called from EVP_cleanup() so needs to be
explicitly called in de-init. Also BIO_sock_cleanup() also needs to be
called.
Reviewed-by: Richard Levitte <levitte@openssl.org>
With bash and zsh, the trap on the 5 second read does respond, but
doesn't break out of the read. What's worse is that it takes away the
5 second timer, and therefore has the read hang indefinitely and
(almost) unbreakable.
Having the trap do 'exit 0' after reseting the tty params has it break
out of read and continue with the configuration.
Other shells do not appear to have the issue described here, but
neither does the extra 'exit 0' appear to harm them.
Reviewed-by: Andy Polyakov <appro@openssl.org>
The reason to do so is that some of the generators detect PIC flags
like -fPIC and -KPIC, and those are normally delivered in LD_CFLAGS.
Reviewed-by: Rich Salz <rsalz@openssl.org>
When passing down values to Makefile.shared, do so with single quotes
as much as possible to avoid having the shell create a mess of quotes.
Reviewed-by: Rich Salz <rsalz@openssl.org>
The variable SHARED_CFLAGS and SHARD_LDFLAGS were used in the Unix
template because they normally contain options used when building
"shared". The Windows template, on the other hand, uses LIB_CFLAGS,
to express the intended use of those flags rather than their content.
The Windows template still used SHARED_LDFLAGS, which seems
inconsistent.
To harmonize the two, any SHARED_CFLAGS gets renamed to LIB_CFLAGS and
SHARED_LDFLAGS to LIB_LDFLAGS. That makes the intent consistent along
with BIN_{C,LD}FLAGS and DSO_{C,LD}FLAGS.
Finally, make sure to pass down $(LIB_CFLAGS) or $(DSO_CFLAGS) along
with $(CFLAGS) when using Makefile.shared.
Reviewed-by: Rich Salz <rsalz@openssl.org>
ENGINE_cleanup calls CRYPTO_free_ex_data and therefore,
CRYPTO_cleanup_all_ex_data - which cleans up the method pointers - must
run after ENGINE_cleanup.
Additionally, don't needlessly initialize the EX_CALLBACKS stack during
e.g. CRYPTO_free_ex_data. The only time this is actually needed is when
reserving the first ex data index. Specifically, since sk_num returns -1
on NULL input, the rest of the code already handles a NULL method stack
correctly.
Reviewed-by: Rich Salz <rsalz@openssl.org>
ccache + clang produces a false strcmp warning, see
https://llvm.org/bugs/show_bug.cgi?id=20144
Since this only happens with ccache and --strict-warnings, and
only with certain versions of glibc / clang, disabling
ccache is a reasonable short-term workaround.
Reviewed-by: Richard Levitte <levitte@openssl.org>
While insignificant on Unix like systems, this is significant on
systems like VMS.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Tim Hudson <tjh@openssl.org>
It turns out that different sed implementations treat -i differently
to cause issues. make it simpler by avoiding it entirely and give
perl the trust to be consistent enough.
Reviewed-by: Rich Salz <rsalz@openssl.org>
On Windows we call WSAGetLastError() to find out the last error that
happened on a socket operation. We use this to find out whether we can
retry the operation or not. You are supposed to call this immediately
however in a couple of places we logged an error first. This can end up
making other Windows system calls to get the thread local error state.
Sometimes that can clobber the error code, so if you call WSAGetLastError()
later on you get a spurious response and the socket operation looks like
a fatal error.
Really we shouldn't be logging an error anyway if its a retryable issue.
Otherwise we could end up with stale errors on the error queue.
Reviewed-by: Richard Levitte <levitte@openssl.org>
If pre-processor failed, an empty .s file could be left behind,
which could get successfully compiled if one simply re-ran make
and cause linking failures. Not anymore. Remove even intermediate .S
in case of pre-processor failure.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Running test_ssl with HARNESS_VERBOSE results in lots of spurious warnings
about an inability to load the CT config file. This fixes it.
Reviewed-by: Richard Levitte <levitte@openssl.org>
During auto de-init we were calling ENGINE_cleanup(), and then later
CONF_modules_free(). However the latter function can end up calling
engine code, which can lead to a use of the global_engine_lock after it
has already been freed. Therefore we should swap the calling order of
these two functions.
Reviewed-by: Rich Salz <rsalz@openssl.org>
no-ripemd was unified a while ago but the change was not done in mk1mf.pl. This commit changes the no-ripemd string to no-rmd160 which fixes the no-rmd160 classic build.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Experience has shown that dynamic engines with their own copy of
libcrypto is problematic, so we disable that possibility.
Reviewed-by: Matt Caswell <matt@openssl.org>
One of them didn't clean away .d.tmp files properly.
The other would overwrite the .d files unconditionally, thereby
causing a possibly unnecessary dependency rebuild, which touches the
date of Makefile, which causes a possibly unnecessary rebuild of
buildinf.h and everything that depends on that.
Reviewed-by: Andy Polyakov <appro@openssl.org>
Some of these scripts would recognise an output parameter if it looks
like a file path. That works both in both the classic and new build
schemes. Some fo these scripts would only recognise it if it's a
basename (i.e. no directory component). Those need to be corrected,
as the output parameter in the new build scheme is more likely to
contain a directory component than not.
Reviewed-by: Andy Polyakov <appro@openssl.org>
Pass entire CTLOG_STORE to SCT_print, rather than just the SCT's CTLOG
SCT_print now looks up the correct CT log for you.
Reviewed-by: Emilia Käsper <emilia@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
Remove 'log' field from SCT and related accessors
In order to still have access to an SCT's CTLOG when calling SCT_print,
SSL_CTX_get0_ctlog_store has been added.
Improved documentation for some CT functions in openssl/ssl.h.
Reviewed-by: Emilia Käsper <emilia@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
The AFALG engine created a global EVP_CIPHER instance but was not freeing
it up when the engine was destroyed.
Reviewed-by: Rich Salz <rsalz@openssl.org>
The help text for -d in 'config' was aged, and the option processing
in 'config.com' was just different. This harmonizes 'config.com' with
the instructions in INSTALL and both current reality.
Reviewed-by: Rich Salz <rsalz@openssl.org>
UEFI needs this too. Don't keep it only in the Windows/DOS ifdef block.
This is a fixed version of what was originally commit 963bb62195 and
subsequently reverted in commit 37b1f8bd62. Somewhere along the way, the
Windows/DOS ifdef actually got removed, leaving it just broken. It should
have been turned into an #elif, not removed.
This one correctly changes the logic from
# if WINDOWS|DOS
# if OPENSSL_NO_SOCK
... no-sock ...
# elif !DJGPP
... native windows ...
to
# if OPENSSL_NO_SOCK
... no-sock ...
# elif WINDOWS|DOS
# if !DJGPP
... native windows ...
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
The source file generators sometimes use $(CC) to post-process
generated source, and getting the inclusion directories may be
necessary at times, so we pass them down.
RT#4406
Reviewed-by: Rich Salz <rsalz@openssl.org>
Although theoretically possible, Configure doesn't treat CC variable
set like this very well: CC="ccache i686-w64-mingw32-gcc"
Also, this Travis script doesn't recognise the possibility either.
Reviewed-by: Rich Salz <rsalz@openssl.org>
BIO_snprintf() can return -1 on truncation (and overflow as of commit
9cb177301f). Though neither can
realistically occur while printing a pointer and short fixed string into
a buffer of length 256, the analysis to confirm that this the case goes
somewhat far up the call chain, and not all static analyzers can
successfully follow the chain of logic.
It's easy enough to clamp the returned length to be nonnegative before
continuing, which appeases the static analyzer and does not harm the
subsequent code.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
Some of the ASN.1 routines for the GeneralizedTime type can return
errors; check for these and do not continue past failure, so as
to appease coverity.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
The reason for this is that the static libraries and the DLL import
libraries are named the same on Windows. When configured "shared",
the static libraries are unused anyway.
Reviewed-by: Rich Salz <rsalz@openssl.org>
set pointers to NULL after OPENSSL_free before returning to caller to
avoid possible double-free in caller
Signed-off-by: Rich Salz <rsalz@akamai.com>
Reviewed-by: Richard Levitte <levitte@openssl.org>
This corrects a fault where the inner IF in this example was still
being acted upon:
IF[0]
...whatever...
IF[1]
...whatever more...
ENDIF
ENDIF
With this change, the inner IF is skipped over.
Reviewed-by: Matt Caswell <matt@openssl.org>
Adjust ssl_set_client_hello_version to get both the minimum and maximum and then
make ssl_set_client_hello_version use the maximum version.
Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
MR: #1595
The "extra checks" is a debugging tool to check the config resolving
mechanism. It uses Perl's smart match, which is experimental and
therefore always causes Perl to give out a warning, and it causes
older Perl versions to fail entirely.
So, it gets commented away, but stays otherwise in place, as it may be
useful again.
Reviewed-by: Matt Caswell <matt@openssl.org>
ct_test assumed it's run in the source directory and failed when built
elsewhere. It still defaults to that, but can be told another story
with the environment variables CT_DIR and CERTS_DIR.
Test recipe updated to match.
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Emilia Käsper <emilia@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
Both of these functions can easily be implemented by callers instead.
Reviewed-by: Emilia Käsper <emilia@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
Use "!x" instead of "x <= 0", as these functions never return a negative
value.
Reviewed-by: Emilia Käsper <emilia@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
No longer terminates on first error, but instead tries to set the source
of every SCT regardless of whether an error occurs with some.
Reviewed-by: Emilia Käsper <emilia@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
ct_test assumed it's run in the source directory and failed when built
elsewhere. It still defaults to that, but can be told another story
with the environment variables CT_DIR and CERTS_DIR.
Test recipe updated to match.
Reviewed-by: Matt Caswell <matt@openssl.org>
Update the CHANGES and NEWS files with information about the recently added
AFALG engine and pipelining.
Reviewed-by: Richard Levitte <levitte@openssl.org>
All OpenSSL code has now been transferred to use the new threading API,
so the old one is no longer used and can be removed. We provide some compat
macros for removed functions which are all no-ops.
There is now no longer a need to set locking callbacks!!
Reviewed-by: Richard Levitte <levitte@openssl.org>
The locking here is a bit strange and unclear. Rather than refactor
anything and possibly break stuff I have just moved to using the new
thread API following as closely as possible what was there previously.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Before the 'Introduce the "pic" / "no-pic" config option' commit, the
shared_cflag value for the chosen config would be part of the make
variable CFLAG, which got replicated into CFLAGS and ASFLAGS.
Since said commit, the shared_cflag value has become a make variable
of its own, SHARED_CFLAG (which is left empty in a "no-pic" build).
However, ASFLAGS was forgotten. That's what's corrected with this
change.
Reviewed-by: Andy Polyakov <appro@openssl.org>
If there is cause to think LD_LIBRARY_PATH_32 and LD_PRELOAD_32 are
appropriate variables to touch, do so. Otherwise, touch the usual
LD_LIBRARY_PATH and LD_PRELOAD. This covers for older installations
that don't have a mix of 32-bit and 64-bit libs.
Reviewed-by: Andy Polyakov <appro@openssl.org>
According to manuals found here: https://gcc.gnu.org/onlinedocs/, GNU
C version 3 and on support the dependency generation options. We
therefore need to check the gcc version to see if we're going to use
it or makedepend for dependency generation.
Reviewed-by: Andy Polyakov <appro@openssl.org>
crypto/evp/e_aes.c and crypto/modes/gcm128.c include ppc_arch.h, which
is located in crypto/, so add that as extra include directory for them.
Issue reported by Jeffrey Walton <noloader@gmail.com>
Reviewed-by: Andy Polyakov <appro@openssl.org>
This introduces the settings loutflag and aroutflag, because different
Windows tools that do the same thing have different ways to specify
the output file.
The Borland C++ config is commented away for the monent, perhaps
permanently.
Reviewed-by: Rich Salz <rsalz@openssl.org>
This gets rid of the BEGINRAW..ENDRAW sections in crypto/whrlpool/build.info.
This also moves the assembler generating perl scripts to take the
output file name as last command line argument, where necessary.
Reviewed-by: Andy Polyakov <appro@openssl.org>
This gets rid of the BEGINRAW..ENDRAW sections in crypto/sha/build.info.
This also moves the assembler generating perl scripts to take the
output file name as last command line argument, where necessary.
Reviewed-by: Andy Polyakov <appro@openssl.org>
This gets rid of the BEGINRAW..ENDRAW sections in crypto/rc4/build.info.
This also moves the assembler generating perl scripts to take the
output file name as last command line argument, where necessary.
Reviewed-by: Andy Polyakov <appro@openssl.org>
This gets rid of the BEGINRAW..ENDRAW sections in crypto/rc5/build.info.
This also moves the assembler generating perl scripts to take the
output file name as last command line argument, where necessary.
Reviewed-by: Andy Polyakov <appro@openssl.org>
This gets rid of the BEGINRAW..ENDRAW sections in crypto/ripemd/build.info.
This also moves the assembler generating perl scripts to take the
output file name as last command line argument, where necessary.
Reviewed-by: Andy Polyakov <appro@openssl.org>
This gets rid of the BEGINRAW..ENDRAW sections in crypto/md5/build.info.
This also moves the assembler generating perl scripts to take the
output file name as last command line argument, where necessary.
Reviewed-by: Andy Polyakov <appro@openssl.org>
This gets rid of the BEGINRAW..ENDRAW sections in crypto/modes/build.info.
This also moves the assembler generating perl scripts to take the
output file name as last command line argument, where necessary.
Reviewed-by: Andy Polyakov <appro@openssl.org>
This gets rid of the BEGINRAW..ENDRAW sections in crypto/poly1305/build.info.
This also moves the assembler generating perl scripts to take the
output file name as last command line argument, where necessary.
Reviewed-by: Andy Polyakov <appro@openssl.org>
This gets rid of the BEGINRAW..ENDRAW sections in crypto/des/build.info.
This also moves the assembler generating perl scripts to take the
output file name as last command line argument, where necessary.
Reviewed-by: Andy Polyakov <appro@openssl.org>
This gets rid of the BEGINRAW..ENDRAW sections in crypto/ec/build.info.
This also moves the assembler generating perl scripts to take the
output file name as last command line argument, where necessary.
Reviewed-by: Andy Polyakov <appro@openssl.org>
This gets rid of the BEGINRAW..ENDRAW sections in crypto/camellia/build.info.
This also moves the assembler generating perl scripts to take the
output file name as last command line argument, where necessary.
Reviewed-by: Andy Polyakov <appro@openssl.org>
This gets rid of the BEGINRAW..ENDRAW sections in crypto/cast/build.info.
This also moves the assembler generating perl scripts to take the
output file name as last command line argument, where necessary.
Reviewed-by: Andy Polyakov <appro@openssl.org>
This gets rid of the BEGINRAW..ENDRAW sections in crypto/chacha/build.info.
This also moves the assembler generating perl scripts to take the
output file name as last command line argument, where necessary.
Reviewed-by: Andy Polyakov <appro@openssl.org>
This gets rid of the BEGINRAW..ENDRAW sections in crypto/build.info.
This also moves the assembler generating perl scripts to take the
output file name as last command line argument, where necessary.
Reviewed-by: Andy Polyakov <appro@openssl.org>
This gets rid of the BEGINRAW..ENDRAW sections in crypto/aes/build.info.
This also moves the assembler generating perl scripts to take the
output file name as last command line argument, where necessary.
Reviewed-by: Andy Polyakov <appro@openssl.org>
This gets rid of the BEGINRAW..ENDRAW sections in crypto/bf/build.info.
This also moves the assembler generating perl scripts to take the
output file name as last command line argument, where necessary.
Reviewed-by: Andy Polyakov <appro@openssl.org>
Even if we haven't loaded an engine, we might have set up the
global_engine_lock, so we should still clean up.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Move the chil engine to use the new thread API. As I don't have access to
the hardware I can't test this :-(. I think its ok...
Reviewed-by: Richard Levitte <levitte@openssl.org>
The new Rand usage of Thread API exposed a bug in ssltest. ssltest "cheats"
and uses internal headers to directly call functions that normally you
wouldn't be able to do. This means that auto-init doesn't happen, and
therefore auto-deinit doesn't happen either, meaning that the new rand locks
don't get cleaned up properly.
Reviewed-by: Rich Salz <rsalz@openssl.org>
This change is a bit more complex, as it involves several recipe
variants.
Also, remove the $(CROSS_COMPILE) prefix for the makedepend program.
When we use the program "makedepend", this doesn't serve anything,
and when we use the compiler, this value isn't even used.
Reviewed-by: Rich Salz <rsalz@openssl.org>
VMS doesn't have "makedepend" anyway, so this is just a matter of using
the right qualifiers when 'makedepend' is enabled.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Copy/paste error between SSL_CIPHER_get_kx_nid() and
SSL_CIPHER_get_auth_nid(), wrong table was referenced
Signed-off-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
The Engine API lost the setting of memory management hooks in
bind_engine. Here's putting that back.
EX_DATA and ERR functions need the same treatment.
Reviewed-by: Matt Caswell <matt@openssl.org>
For assembler, we want the final target to be foo.s (lowercase s).
However, the build.info may have lines like this (note upper case S):
GENERATE[foo.S]=foo.pl
This indicates that foo.s (lowercase s) is still to be produced, but
that producing it will take an extra step via $(CC) -E. Therefore,
the following variants (simplified for display) can be generated:
GENERATE[foo.S]=foo.pl => foo.s: foo.pl
$(PERL) $foo.pl $@.S; \
$(CC) $(CFLAGS) -E -P $@.S > $@ && \
rm -f $@.S
GENERATE[foo.s]=foo.pl => foo.s: foo.pl
$(PERL) $foo.pl $@
GENERATE[foo.S]=foo.m4 => foo.s: foo.m4
m4 -B 8192 $foo.m4 > $@.S; \
$(CC) $(CFLAGS) -E -P $@.S > $@ && \
rm -f $@.S
GENERATE[foo.s]=foo.m4 => foo.s: foo.m4
m4 -B 8192 $foo.m4 > $@
Reviewed-by: Andy Polyakov <appro@openssl.org>
Compiling ssltest with some compilers using --strict-warnings results in
complaints about an unused result.
Reviewed-by: Kurt Roeckx <kurt@openssl.org>
This adds a new accessor function DSA_SIG_get0.
The customisation of DSA_SIG structure initialisation has been removed this
means that the 'r' and 's' components are automatically allocated when
DSA_SIG_new() is called. Update documentation.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Make all scripts produce .S, make interpretation of $(CFLAGS)
pre-processor's responsibility, start accepting $(PERLASM_SCHEME).
[$(PERLASM_SCHEME) is redundant in this case, because there are
no deviataions between Solaris and Linux assemblers. This is
purely to unify .pl->.S handling across all targets.]
Reviewed-by: Richard Levitte <levitte@openssl.org>
* Perform ALPN after the SNI callback; the SSL_CTX may change due to
that processing
* Add flags to indicate that we actually sent ALPN, to properly error
out if unexpectedly received.
* clean up ssl3_free() no need to explicitly clear when doing memset
* document ALPN functions
Signed-off-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Emilia Käsper <emilia@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
This is similar to SSL_pending() but just returns a 1 if there is data
pending in the internal OpenSSL buffers or 0 otherwise (as opposed to
SSL_pending() which returns the number of bytes available). Unlike
SSL_pending() this will work even if "read_ahead" is set (which is the
case if you are using read pipelining, or if you are doing DTLS). A 1
return value means that we have unprocessed data. It does *not* necessarily
indicate that there will be application data returned from a call to
SSL_read(). The unprocessed data may not be application data or there
could be errors when we attempt to parse the records.
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Emilia Käsper <emilia@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
This capability is required for read pipelining. We will only read in as
many records as will fit in the read buffer (and the network can provide
in one go). The bigger the buffer the more records we can process in
parallel.
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Emilia Käsper <emilia@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
* Perform ALPN after the SNI callback; the SSL_CTX may change due to
that processing
* Add flags to indicate that we actually sent ALPN, to properly error
out if unexpectedly received.
* clean up ssl3_free() no need to explicitly clear when doing memset
* document ALPN functions
Signed-off-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Emilia Käsper <emilia@openssl.org>
For config targets such as 'dist', which doesn't have a BASE template,
we still need to have a default build scheme.
Additionally, the unified Makefile template's target 'tar' wasn't
quite as flexible as the unixmake one.
Finally, .travis-create-release.sh can be somewhat simplified now that
it builds with the unified build scheme.
Reviewed-by: Matt Caswell <matt@openssl.org>
We want to preserve a couple of classic builds still, the quickest is
to change all --unified to --classic
Reviewed-by: Matt Caswell <matt@openssl.org>
Because of the unified scheme, building on different platforms is very
similar. We currently have Unix and OpenVMS on the unified scheme,
which means that a separate INSTALL.VMS is no longer needed.
Reviewed-by: Matt Caswell <matt@openssl.org>
The kinv/r fields in the DSA structure are not used by OpenSSL internally
and should not be used in general.
Reviewed-by: Rich Salz <rsalz@openssl.org>
The numpipes argument to ssl3_enc/tls1_enc is actually the number of
records passed in the array. To make this clearer rename the argument to
|n_recs|.
Reviewed-by: Tim Hudson <tjh@openssl.org>
Rename the have_whole_app_data_record_waiting() function to include the
ssl3_record prefix...and make it a bit shorter.
Reviewed-by: Tim Hudson <tjh@openssl.org>
Move out most of the boiler plate code that is common between aes128-cbc
and aes128-cbc-hmac-sha1 into helper functions to improve code reuse.
Reviewed-by: Tim Hudson <tjh@openssl.org>
The _hidden_* variables were being created on-the-fly. It is better to
create them once up front during bind to avoid any potential race
conditions.
Reviewed-by: Tim Hudson <tjh@openssl.org>
We had the function EVP_CIPHER_CTX_cipher_data which is newly added for
1.1.0. As we now also need an EVP_CIPHER_CTX_set_cipher_data it makes
more sense for the former to be called EVP_CIPHER_CTX_get_cipher_data.
Reviewed-by: Tim Hudson <tjh@openssl.org>
The new pipeline code added a new function
EVP_CIPHER_CTX_set_cipher_data(). Add documentation for this and the
existing EVP_CIPHER_CTX_cipher_data() function.
Reviewed-by: Tim Hudson <tjh@openssl.org>
We used to use the wrec field in the record layer for keeping track of the
current record that we are writing out. As part of the pipelining changes
this has been moved to stack allocated variables to do the same thing,
therefore the field is no longer needed.
Reviewed-by: Tim Hudson <tjh@openssl.org>
A previous commit added the SSL_has_pending() function which provides a
method for knowing whether OpenSSL has buffered, but as yet unprocessed
record data.
Reviewed-by: Tim Hudson <tjh@openssl.org>
Previously s_client and s_server relied on using SSL_pending() which does
not take into account read_ahead. For read pipelining to work, read_ahead
gets set automatically. Therefore s_client and s_server have been
converted to use SSL_has_pending() instead.
Reviewed-by: Tim Hudson <tjh@openssl.org>
This is similar to SSL_pending() but just returns a 1 if there is data
pending in the internal OpenSSL buffers or 0 otherwise (as opposed to
SSL_pending() which returns the number of bytes available). Unlike
SSL_pending() this will work even if "read_ahead" is set (which is the
case if you are using read pipelining, or if you are doing DTLS). A 1
return value means that we have unprocessed data. It does *not* necessarily
indicate that there will be application data returned from a call to
SSL_read(). The unprocessed data may not be application data or there
could be errors when we attempt to parse the records.
Reviewed-by: Tim Hudson <tjh@openssl.org>
This capability is required for read pipelining. We will only read in as
many records as will fit in the read buffer (and the network can provide
in one go). The bigger the buffer the more records we can process in
parallel.
Reviewed-by: Tim Hudson <tjh@openssl.org>
With read pipelining we use multiple SSL3_RECORD structures for reading.
There are SSL_MAX_PIPELINES (32) of them defined (typically not all of these
would be used). Each one has a 16k compression buffer allocated! This
results in a significant amount of memory being consumed which, most of the
time, is not needed. This change swaps the allocation of the compression
buffer to be lazy so that it is only done immediately before it is actually
used.
Reviewed-by: Tim Hudson <tjh@openssl.org>
Read pipelining is controlled in a slightly different way than with write
pipelining. While reading we are constrained by the number of records that
the peer (and the network) can provide to us in one go. The more records
we can get in one go the more opportunity we have to parallelise the
processing.
There are two parameters that affect this:
* The number of pipelines that we are willing to process in one go. This is
controlled by max_pipelines (as for write pipelining)
* The size of our read buffer. A subsequent commit will provide an API for
adjusting the size of the buffer.
Another requirement for this to work is that "read_ahead" must be set. The
read_ahead parameter will attempt to read as much data into our read buffer
as the network can provide. Without this set, data is read into the read
buffer on demand. Setting the max_pipelines parameter to a value greater
than 1 will automatically also turn read_ahead on.
Finally, the read pipelining as currently implemented will only parallelise
the processing of application data records. This would only make a
difference for renegotiation so is unlikely to have a significant impact.
Reviewed-by: Tim Hudson <tjh@openssl.org>
Add the options min_send_frag and max_pipelines to s_server and s_client
in order to control pipelining capabilities. This will only have an effect
if a pipeline capable cipher is used (such as the one provided by the
dasync engine).
Reviewed-by: Tim Hudson <tjh@openssl.org>
Use the new pipeline cipher capability to encrypt multiple records being
written out all in one go. Two new SSL/SSL_CTX parameters can be used to
control how this works: max_pipelines and split_send_fragment.
max_pipelines defines the maximum number of pipelines that can ever be used
in one go for a single connection. It must always be less than or equal to
SSL_MAX_PIPELINES (currently defined to be 32). By default only one
pipeline will be used (i.e. normal non-parallel operation).
split_send_fragment defines how data is split up into pipelines. The number
of pipelines used will be determined by the amount of data provided to the
SSL_write call divided by split_send_fragment. For example if
split_send_fragment is set to 2000 and max_pipelines is 4 then:
SSL_write called with 0-2000 bytes == 1 pipeline used
SSL_write called with 2001-4000 bytes == 2 pipelines used
SSL_write called with 4001-6000 bytes == 3 pipelines used
SSL_write_called with 6001+ bytes == 4 pipelines used
split_send_fragment must always be less than or equal to max_send_fragment.
By default it is set to be equal to max_send_fragment. This will mean that
the same number of records will always be created as would have been
created in the non-parallel case, although the data will be apportioned
differently. In the parallel case data will be spread equally between the
pipelines.
Reviewed-by: Tim Hudson <tjh@openssl.org>
Implement aes128-cbc as a pipeline capable cipher in the dasync engine.
As dasync is just a dummy engine, it actually just performs the parallel
encrypts/decrypts in serial.
Reviewed-by: Tim Hudson <tjh@openssl.org>
Add a flag to indicate that a cipher is capable of performing
"pipelining", i.e. multiple encrypts/decrypts in parallel. Also add some
new ctrls that ciphers will need to implement if they are pipeline capable.
Reviewed-by: Tim Hudson <tjh@openssl.org>
- Only build & test two configurations. Make all the
other build variants buildonly on gcc (clang on osx).
- Don't build with default clang at all on linux.
- Only use gcc-5 and clang-3.6 for the sanitizer builds. Re-running
e.g. CONFIG_OPTS="shared" with them seems redundant.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Strictly speaking, it isn't stdio and file access which offend me here;
it's the fact that UEFI doesn't provide a strdup() function. But the
fact that it's pointless without file access is a good enough excuse for
compiling it out.
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
UEFI needs this too. Don't keep it only in the Windows/DOS ifdef block.
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
Without this, the peer certificate would never be deleted, resulting in
a memory leak.
Reviewed-by: Emilia Käsper <emilia@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
It was unexpected that OpenSSL::Test::setup() should be called twice
by the same recipe. However, that may happen if a recipe combines
OpenSSL::Test and OpenSSL::Test::Simple, which can be a sensible thing
to do. Therefore, we now allow it.
Reviewed-by: Rich Salz <rsalz@openssl.org>
This gets rid of the BEGINRAW..ENDRAW sections in engines/build.info.
This also moves the assembler generating perl scripts to take the
output file name as last command line argument, where necessary.
Reviewed-by: Rich Salz <rsalz@openssl.org>
This gets rid of the BEGINRAW..ENDRAW sections in crypto/bn/build.info.
This also moves the assembler generating perl scripts to take the
output file name as last command line argument, where necessary.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Should it be needed because the recipes within a RAW section might
clash with those generated by Configure, it's possible to tell it
not to generate them with the use of OVERRIDES, for example:
SOURCE[libfoo]=foo.c bar.c
OVERRIDES=bar.o
BEGINRAW[Makefile(unix)]
bar.o: bar.c
$(CC) $(CFLAGS) -DSPECIAL -c -o $@ $<
ENDRAW[Makefile(unix)]
Reviewed-by: Rich Salz <rsalz@openssl.org>
In some cases, one might want to generate some source files from
others, that's done as follows:
GENERATE[foo.s]=asm/something.pl $(CFLAGS)
GENERATE[bar.s]=asm/bar.S
The value of each GENERATE line is a command line or part of it.
Configure places no rules on the command line, except the the first
item muct be the generator file. It is, however, entirely up to the
build file template to define exactly how those command lines should
be handled, how the output is captured and so on.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Swap the use of CRYPTO_LOCK_INIT in the init code to use the new threading
API mechanism for locking.
Reviewed-by: Richard Levitte <levitte@openssl.org>
The init code was using its own thread local code. Now we have a central
API for it we should use that instead.
Reviewed-by: Richard Levitte <levitte@openssl.org>
The init code was using its own "once" implementation. Now that we have
the new thread API we should use that instead.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Make PKCS8_PRIV_KEY_INFO opaque. Several accessor functions already exist
for this structure. Two new ones were added to handle attributes.
The old handling of broken formats has been removed and the corresponding
structures simplified.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Move RSA struct in the job local struct.
The change is applied also to other crypto operations (e.g. DSA) to
make things consistent.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
Summary of the changes:
* Move the calls to the crypto operations inside wrapper functions.
This is required because ASYNC_start_job takes a function as an argument.
* Add new function run_benchmark() that manages the jobs for all the operations.
In the POSIX case it uses a select() to receive the events from the engine
and resume the jobs that are paused, while in the WIN case it uses PeekNamedPipe()
* Add new option argument async_jobs to enable and specify the number of async jobs
Example:
openssl speed -engine dasync -elapsed -async_jobs 32 rsa2048
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
- Always prefer forward-secure handshakes.
- Consistently order ECDSA above RSA.
- Next, always prefer AEADs to non-AEADs, irrespective of strength.
- Within AEADs, prefer GCM > CHACHA > CCM for a given strength.
- Prefer TLS v1.2 ciphers to legacy ciphers.
- Remove rarely used DSS, IDEA, SEED, CAMELLIA, CCM from the default
list to reduce ClientHello bloat.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Some OSes, *cough*-dows, insist on stack being "wired" to
physical memory in strictly sequential manner, i.e. if stack
allocation spans two pages, then reference to farmost one can
be punishable by SEGV. But page walking can do good even on
other OSes, because it guarantees that villain thread hits
the guard page before it can make damage to innocent one...
Reviewed-by: Rich Salz <rsalz@openssl.org>
"no-pic" builds have in fact been green (and reasonably fast), so
restore them while we figure out why tests without "no-pic" hang.
Reviewed-by: Andy Polyakov <appro@openssl.org>
Not all assemblers of "gas" flavour handle binary constants, e.g.
seasoned MacOS Xcode doesn't, so give them a hand.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
The af_alg engine and associated test were creating warnings when compiled
with clang. This fixes it.
Reviewed-by: Richard Levitte <levitte@openssl.org>
The new afalg test should have a copyright date of 2016. Also an
incorrect buffer was being sent to EVP_CipherFinal_ex when
decrypting.
Reviewed-by: Richard Levitte <levitte@openssl.org>
1. Cleaned up eventfd handling
2. Reworked socket setup code to allow other algorithms to be added in
future
3. Fixed compile errors for static build
4. Added error to error stack in all cases of ALG_PERR/ALG_ERR
5. Called afalg_aes_128_cbc() from bind() to avoid race conditions
6. Used MAX_INFLIGHT define in io_getevents system call
7. Coding style fixes
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
- Remove Win builds (temporarily). They're slow, allowed to fail,
and therefore not useful as they are.
- Make the --unified part of the matrix build-only. (This can be
swapped if --unified becomes the default)
- Only build 'no-engine' once, don't run any tests, but don't allow it
to fail.
Reviewed-by: Richard Levitte <levitte@openssl.org>
- Remove no-asm. We've got to cut something, and this is at least
partially covered by the sanitizer builds.
- Remove enable-crypto-mdebug from sanitizer
builds. enable-crypto-mdebug has been shown to catch some static
initialization bugs that the standard leak sanitizer can't so
perhaps it has _some_ value; but we shouldn't let the two compete.
Reviewed-by: Richard Levitte <levitte@openssl.org>
When object files with common block symbols are added to static
libraries on Darwin, those symbols are invisible to the linker that
tries to use them. Our solution was to use -fno-common when compiling
C source.
Unfortunately, there is assembler code that defines OPENSSL_ia32cap_P
as a common block symbol, unconditionally, and in some cases, there is
no other definition. -fno-common doesn't help in this case.
However, 'ranlib -c' adds common block symbols to the index of the
static library, which makes them visible to the linker using it, and
that solves the problem we've seen.
The common conclusion is, either use -fno-common or ranlib -c on
Darwin. Since we have common block symbols unconditionally, choosing
the method for our source is easy.
Reviewed-by: Kurt Roeckx <kurt@openssl.org>
Add support for application supplied any defined by callback. An
application can change the selector value if it wishes. This is
mainly intended for values which are only known at runtime, for
example dynamically created OIDs.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Previously, the remaining CT log entries would not be loaded.
Also, CTLOG_STORE_load_file would return 1 even if a log entry was
invalid, resulting in no errors being shown.
Reviewed-by: Ben Laurie <ben@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
Disabled by default, but can be enabled by setting the
ct_validation_callback on a SSL or SSL_CTX.
Reviewed-by: Ben Laurie <ben@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
Change the ECC default curve list to be this, in order: x25519, secp256r1,
secp521r1, secp384r1, brainpoolP256r1, brainpoolP384r1, and brainpool512r1.
Reviewed-by: Emilia Käsper <emilia@openssl.org>
Appease the sanitizer: avoid left shifts of negative values.
This could've been done entirely with casts to uint and back,
but using masks seemed slightly more readable.
There are also implementation-defined signed right shifts in this
code. Those remain.
Reviewed-by: Rich Salz <rsalz@openssl.org>
RC4 based ciphersuites in libssl have been disabled by default. They can
be added back by building OpenSSL with the "enable-weak-ssl-ciphers"
Configure option at compile time.
Reviewed-by: Rich Salz <rsalz@openssl.org>
The proper logic is that both zlib and zlib-dynamic are disabled by
default and that enabling zlib-dynamic would enable zlib. Somewhere
along the way, the logic got changed, zlib-dynamic was enabled by
default and zlib didn't get automatically enabled.
This change restores the original logic.
Reviewed-by: Rich Salz <rsalz@openssl.org>
PVK files with abnormally large length or salt fields can cause an
integer overflow which can result in an OOB read and heap corruption.
However this is an rarely used format and private key files do not
normally come from untrusted sources the security implications not
significant.
Fix by limiting PVK length field to 100K and salt to 10K: these should be
more than enough to cover any files encountered in practice.
Issue reported by Guido Vranken.
Reviewed-by: Rich Salz <rsalz@openssl.org>
This patch implements the HMAC-based Extract-and-Expand Key Derivation
Function (HKDF) as defined in RFC 5869.
It is required to implement the QUIC and TLS 1.3 protocols (among others).
Signed-off-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Dr. Stephen Henson <steve@openssl.org>
- Remove OPENSSL_X25519_X86_64 which never worked, because we don't have
the assembly.
- Also remove OPENSSL_SMALL (which should have been
OPENSSL_SMALL_FOOTPRINT) which isn't a priority at the moment.
Reviewed-by: Rich Salz <rsalz@openssl.org>
1) Simplify code with better PACKET methods.
2) Make broken SNI parsing explicit. SNI was intended to be extensible
to new name types but RFC 4366 defined the syntax inextensibly, and
OpenSSL has never parsed SNI in a way that would allow adding a new name
type. RFC 6066 fixed the definition but due to broken implementations
being widespread, it appears impossible to ever extend SNI.
3) Annotate resumption behaviour. OpenSSL doesn't currently handle all
extensions correctly upon resumption. Annotate for further clean-up.
4) Send an alert on ALPN protocol mismatch.
Reviewed-by: Kurt Roeckx <kurt@openssl.org>
Handle KDF in ECDH_compute_key instead of requiring each implementation
support it. This modifies the compute_key method: now it allocates and
populates a buffer containing the shared secret.
Reviewed-by: Rich Salz <rsalz@openssl.org>
We copied $target{cflags}, $target{defines} and a few more to %config,
just to add to the entries. Avoid doing so, and let the build templates
deal with combining the two.
There are a few cases where we still fiddle with %target, but that's
acceptable.
Reviewed-by: Andy Polyakov <appro@openssl.org>
The thread_cflag setting filled a double role, as kinda sorta an
indicator of thread scheme, and as cflags. Some configs also added
lflags and ex_libs for multithreading regardless of if threading would
be enabled or not.
Instead of this, add threading cflags among in the cflag setting,
threading lflags in the lflag setting and so on if and only if threads
are enabled (which they are by default).
Also, for configs where there are no special cflags for threading (the
VMS configs are of that kind), this makes it possible to still clearly
mention what thread scheme is used.
The exact value of thread scheme is currently ignored except when it's
"(unknown)", and thereby only serves as a flag to tell if we know how
to build for multi-threading in a particular config. Yet, the
currently used values are "(unknown)", "pthreads", "uithreads" (a.k.a
solaris threads) and "winthreads".
Reviewed-by: Andy Polyakov <appro@openssl.org>
Instead, make the build type ("debug" or "release") available through
$config{build_type} and let the configs themselves figure out what the
usual settings (such as "cflags", "lflags" and so on) should be
accordingly.
The benefit with this is that we can now have debug and release
variants of any setting, not just those Configure supports, and may
also involve other factors (the MSVC flags /MD[d] and /MT[d] involve
both build type and whether threading is enabled or not)
Reviewed-by: Andy Polyakov <appro@openssl.org>
Configure had the Unix centric addition of -lz when linking with zlib
is enabled, which doesn't work on other platforms. Therefore, we move
it to the BASE_unix config template and add corresponding ones in the
other BASE_* config templates. The Windows one is probably incomplete,
but that doesn't matter for the moment, as mk1mf does it's own thing
anyway.
This required making the %withargs table global, so perl snippets in
the configs can use it.
Reviewed-by: Andy Polyakov <appro@openssl.org>
These BASE templates are intended to hold values that are common for
all configuration variants for whole families of configurations.
So far, three "families" are identified: Unix, Windows and VMS, mostly
characterised by the build system they currently use.
Reviewed-by: Andy Polyakov <appro@openssl.org>
This provides for more powerful lazy evaluation and buildup of the
setting contents. For example, something like this becomes possible:
defines => [ sub { $config{thisorthat} ? "FOO" : () } ]
Any undefined result of such functions (such as 'undef' or the empty
list) will be ignored.
Reviewed-by: Andy Polyakov <appro@openssl.org>
This patch provides getters for default_passwd_cb and userdata for SSL
and SSL_CTX. The getter functions are required to port Python's ssl module
to OpenSSL 1.1.0.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
This has no real meaning, except it gives Configure a hint that VC
targets are indeed capable of producing shared objects.
Reviewed-by: Matt Caswell <matt@openssl.org>
There are cases, for example when configuring no-asm, that the added
uplink source files got in the way of the cpuid ones. The best way to
solve this is to separate the two.
Reviewed-by: Andy Polyakov <appro@openssl.org>
Formally only 32-bit AVX2 code path needs this, but I choose to
harmonize all vector code paths.
RT#4346
Reviewed-by: Richard Levitte <levitte@openssl.org>
Most of the assembly uses constants from arm_arch.h, but a few references to
ARMV7_NEON don't. Consistently use the macros everywhere.
Signed-off-by: Andy Polyakov <appro@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
Instead of overriding a default operation move default operation to a
separate function which is then explicitly included in any EC_METHOD
that uses it.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Specifies a callback that will, in the future, be used by the SSL code to
decide whether to abort a connection on Certificate Transparency grounds.
Reviewed-by: Ben Laurie <ben@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
The HOST_c2l() macro assigns the value to the specified variable, but also
evaluates to the same value. Which we ignore, triggering a warning.
To fix this, just cast it to void like we did in commit 08e553644
("Fix some clang warnings.") for a bunch of other instances.
Signed-off-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Andy Polyakov <appro@openssl.org>
and reorganize/harmonize post-conditions.
Additional hardening following on from CVE-2016-0702
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
At the same time remove miniscule bias in final subtraction.
Performance penalty varies from platform to platform, and even with
key length. For rsa2048 sign it was observed to be 4% for Sandy
Bridge and 7% on Broadwell.
CVE-2016-0702
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
Performance penalty is 2% on Linux and 5% on Windows.
CVE-2016-0702
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
Performance penalty varies from platform to platform, and even
key length. For rsa2048 sign it was observed to reach almost 10%.
CVE-2016-0702
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
in s_server cmd:
specifying -trace option, falls through and turn-on security_debug
Signed-off-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
In the BN_hex2bn function the number of hex digits is calculated using
an int value |i|. Later |bn_expand| is called with a value of |i * 4|.
For large values of |i| this can result in |bn_expand| not allocating any
memory because |i * 4| is negative. This leaves ret->d as NULL leading
to a subsequent NULL ptr deref. For very large values of |i|, the
calculation |i * 4| could be a positive value smaller than |i|. In this
case memory is allocated to ret->d, but it is insufficiently sized
leading to heap corruption. A similar issue exists in BN_dec2bn.
This could have security consequences if BN_hex2bn/BN_dec2bn is ever
called by user applications with very large untrusted hex/dec data. This is
anticipated to be a rare occurrence.
All OpenSSL internal usage of this function uses data that is not expected
to be untrusted, e.g. config file data or application command line
arguments. If user developed applications generate config file data based
on untrusted data then it is possible that this could also lead to security
consequences. This is also anticipated to be a rare.
Issue reported by Guido Vranken.
CVE-2016-0797
Reviewed-by: Andy Polyakov <appro@openssl.org>
If the tests fail early before an ASYNC_WAIT_CTX is created then there
can be a use before init problem in asynctest.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Clarify that the "cleanup" routing does not get called if you invoke
ASYNC_WAIT_CTX_clear_fd() directly.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Implementation experience has shown that the original plan for async wait
fds was too simplistic. Originally the async logic created a pipe internally
and user/engine code could then get access to it via API calls. It is more
flexible if the engine is able to create its own fd and provide it to the
async code.
Another issue is that there can be a lot of churn in the fd value within
the context of (say) a single SSL connection leading to continually adding
and removing fds from (say) epoll. It is better if we can provide some
stability of the fd value across a whole SSL connection. This is
problematic because an engine has no concept of an SSL connection.
This commit refactors things to introduce an ASYNC_WAIT_CTX which acts as a
proxy for an SSL connection down at the engine layer.
Reviewed-by: Richard Levitte <levitte@openssl.org>
VisualStudio 2015 has a bug where an internal compiler error was occurring.
By reordering the DEFINE_STACK_OF declarations for SSL_CIPHER and SSL_COMP
until after the ssl3.h include everything seems ok again.
Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
Add X25519 to TLS supported curve list.
Reject attempts to configure keys which cannot be used
for signing.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Emilia Käsper <emilia@openssl.org>
Add a flag to EC_METHOD for curves which do not support signing.
New function EC_KEY_can_sign() returns 1 is key can be used for signing.
Return an explicit error is an attempt is made to sign with
no signing curves.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Emilia Käsper <emilia@openssl.org>
In some cases the EC_POINT and EC_KEY BIGNUM components are suboptimal
or inappropriate. Add an "custom_data" field which curves can populate with
a custom structure to suit their needs.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Emilia Käsper <emilia@openssl.org>
Extract compression form in EC_KEY_oct2key() instead of manually in the
ASN.1 code. For custom curves do not assume the initial octet is the
compression form: it isn't for X25519 et al.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Emilia Käsper <emilia@openssl.org>
Add support for optional overrides of various private key operations
in EC_METHOD.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Emilia Käsper <emilia@openssl.org>
Use standard X25519 and X448 names for OIDs. Delete EdDSA OIDs: for now they
wont be used and EdDSA may use a different format.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Emilia Käsper <emilia@openssl.org>
When building with GNU C, clang or VMS C, it's more efficient to
generate dependency file and object file in one call rather than two.
Have the dependency output in a temporary file and compare it with the
previous one if available to see if replacement is waranted, thereby
avoiding unnecessary reconstruction of Makefile / descrip.mms.
Github issue #750
Reviewed-by: Rich Salz <rsalz@openssl.org>
Stack Overflow has a number of questions related to mutual authentication,
the client and its certificate. Those visiting the man pages for functions
like SSL_CTX_use_certificate and SSL_CTX_load_verify_locations don't
receive the benefit of a cross reference to SSL_CTX_set_client_CA_list.
Reviewed-by: Richard Levitte <levitte@openssl.org>
- srtp_profiles variable is defined when building with SRTP, keeping
the variable usage also under ifndef OPENSSL_NO_SRTP
- alpn help option was kept under ifndef OPENSSL_NO_SRTP
Reviewed-by: Kurt Roeckx <kurt@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
The INCLUDE statement can handle setting extra include directories for
individual object files, let's use it.
Reviewed-by: Andy Polyakov <appro@openssl.org>
I read the PROBLEMS, and they're outdated; nothing I'd put in the
online FAQ, for example. Test-builds work without using these files.
Had to remove the rehash.time stuff from Makefile.in
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reformat EC_POINT_new.pod and add parentheses to function names.
Clarify the octet form.
Add documentation for EC_POINT_oct2buf().
Reviewed-by: Rich Salz <rsalz@openssl.org>
In EC_KEY_priv2buf(), check for pbuf sanity.
If invoked with NULL, gracefully returns the key length.
Signed-off-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
- In error paths, EVP_MD_CTX allocated by the callee is not released.
- Checking method before accessing
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
We are using strcmp() as the cmp_func, where in the EDK2 environment
strcmp actually ends up being the external AsciiStrCmp() function —
an EFI library function defined with the Microsoft ABI.
This means that we can't just assign function pointers to it, since
in GCC-hosted builds the ABI of any function *not* explicitly marked
EFIAPI is the native SysV ABI.
Arguably this stupidity ought to be resolved on the UEFI side, but in
the general case that would mean that we need to provide ABI-compatible
wrappers for *all* the "standard" functions, just in case they're used
like this.
And in fact we already have a workaround here for DEC C. So instead of
playing games with casting function pointers, it's nicer just to use a
simple function to wrap the strcmp() call. That cleans up the DEC C
workaround, *and* it works around the UEFI bogosity at the same time.
Signed-off-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Kurt Roeckx <kurt@openssl.org>
mkdef.pl was issuing the following error:
Use of uninitialized value within %tag in numeric eq (==) at
util/mkdef.pl line 560, <IN> line 92
This was because it was treating a __cplusplus "#ifdef" check as a "tag"
but then skipping over the corresponding "#endif". Therefore after
processing a file it still had "left over" tags from processing the
previous file. It was also getting confused by "#if" checks that didn't
match is pre-defined styles.
Reviewed-by: Richard Levitte <levitte@openssl.org>
They now default to " " as separator, but that can be overridden by
having a hash with parameters as last argument. The only currently
recognised parameter is `separator'.
The special separator `undef' will force the result to become a list
rather than a concatenated string.
Reviewed-by: Andy Polyakov <appro@openssl.org>
The internal |fmtstr| function used in processing a "%s" format string
in the BIO_*printf functions could overflow while calculating the length
of a string and cause an OOB read when printing very long strings.
Additionally the internal |doapr_outch| function can attempt to write to
an OOB memory location (at an offset from the NULL pointer) in the event of
a memory allocation failure. In 1.0.2 and below this could be caused where
the size of a buffer to be allocated is greater than INT_MAX. E.g. this
could be in processing a very long "%s" format string. Memory leaks can also
occur.
These issues will only occur on certain platforms where sizeof(size_t) >
sizeof(int). E.g. many 64 bit systems. The first issue may mask the second
issue dependent on compiler behaviour.
These problems could enable attacks where large amounts of untrusted data
is passed to the BIO_*printf functions. If applications use these functions
in this way then they could be vulnerable. OpenSSL itself uses these
functions when printing out human-readable dumps of ASN.1 data. Therefore
applications that print this data could be vulnerable if the data is from
untrusted sources. OpenSSL command line applications could also be
vulnerable where they print out ASN.1 data, or if untrusted data is passed
as command line arguments.
Libssl is not considered directly vulnerable. Additionally certificates etc
received via remote connections via libssl are also unlikely to be able to
trigger these issues because of message size limits enforced within libssl.
CVE-2016-0799
Issue reported by Guido Vranken.
Reviewed-by: Andy Polyakov <appro@openssl.org>
Simplifies calling code. Also fixed up any !ptr tests that were
nearby, turning them into NULL tests.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Fixes github issue 463. Building the app without OPENSSL_NO_SOCK
isn't supported, so only do OPENSSL_NO_OCSP.
Reviewed-by: Andy Polyakov <appro@openssl.org>
The SRP user database lookup method SRP_VBASE_get_by_user had confusing
memory management semantics; the returned pointer was sometimes newly
allocated, and sometimes owned by the callee. The calling code has no
way of distinguishing these two cases.
Specifically, SRP servers that configure a secret seed to hide valid
login information are vulnerable to a memory leak: an attacker
connecting with an invalid username can cause a memory leak of around
300 bytes per connection.
Servers that do not configure SRP, or configure SRP but do not configure
a seed are not vulnerable.
In Apache, the seed directive is known as SSLSRPUnknownUserSeed.
To mitigate the memory leak, the seed handling in SRP_VBASE_get_by_user
is now disabled even if the user has configured a seed.
Applications are advised to migrate to SRP_VBASE_get1_by_user. However,
note that OpenSSL makes no strong guarantees about the
indistinguishability of valid and invalid logins. In particular,
computations are currently not carried out in constant time.
Reviewed-by: Rich Salz <rsalz@openssl.org>
If the local system doesn't have GNU C or clang, and not even
makedepend, the build will stop because the call of 'makedepend'
fails. This changes so the build won't stop because of such failure.
The result will be empty .d files, and that's ok.
Reviewed-by: Rich Salz <rsalz@openssl.org>
The ssl_set_masks() function no longer depends on the cipher. This
also means there is no need to set the masks for each cipher in
ssl3_choose_cipher.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Different assembler versions disagree on how to interpret #-1 as
argument to vmov.i64, as 0xffffffffffffffff or 0x00000000ffffffff.
So replace it with something they can't disagree on.
Reviewed-by: Rich Salz <rsalz@openssl.org>
The entire contents of <internal/bn_conf.h> are unwanted in the UEFI
build because we have to do it differently there. To support building
for both 32-bit and 64-bit platforms without re-running the OpenSSL
Configure script, the EDK2 environment defines THIRTY_TWO_BIT or
SIXTY_FOUR_BIT for itself according to the target platform.
The current setup is broken, though. It checks for OPENSSL_SYS_UEFI but
before it's actually defined, since opensslconf.h hasn't yet been
included.
Let's fix that by including opensslconf.h. And also let's move the
bn_conf.h doesn't even need to *exist* in the UEFI build environment.
This is also GH PR736.
Signed-off-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Tim Hudson <tjh@openssl.org>
Removing code, where memory was getting allocated for an unused variable
Signed-off-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
These flags are limitting needlessly, are often patched by packagers,
and should be specified on the configuration command line by anyone
who desires for it to be specific rather than forced by us.
This work was already done with mingw when those configs were worked
on, now it gets applied to the remaining configs.
Reviewed-by: Andy Polyakov <appro@openssl.org>
In the earlier change, where static libraries get built with position
independent code, OPENSSL_PIC was removed by mistake. This adds it
back.
Reviewed-by: Tim Hudson <tjh@openssl.org>
Adding -nostdinc to the EDK2 showed that we were including <inttypes.h>
for some UEFI builds, because the check for __STDC_VERSION__ happens
before the check for OPENSSL_SYS_UEFI. Fix that.
Signed-off-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Tim Hudson <tjh@openssl.org>
The commit 1288f26 says that it fixes no-async, but instead seems to break
it. Therefore revert that change and fix no-async.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Provide an appropriate definition of PRIu64 for the EDK2 build, since
we don't have <inttypes.h> there.
Signed-off-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Tim Hudson <tjh@openssl.org>
This way, we can use them as conditions instead of relying to more or
less obscure aliases in %config or variables directly in Configure.
Reviewed-by: Rich Salz <rsalz@openssl.org>
When building a DSO, there's no reason to include all symbols from
static libraries it happens to link with, whichever they may be.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Preserved for now for those who have scripts with the option
"no-ssl2". We warn that it's deprecated, and ignore it otherwise.
In response to RT#4330
Reviewed-by: Rich Salz <rsalz@openssl.org>
Building shared libraries or not is not the same as building position
independent code or not. It's true that if you don't build PIC, you
can't build shared libraries. However, you may very well want to
build only static libraries but still want PIC code.
Therefore, we introduce a new configuration option "pic", which is
enabled by default or explicitely with "enable-pic", or disabled with
"no-pic" or "disable-pic". Of course, if "pic" is disabled, "shared"
and "dynamic-engine" are automatically disabled as well.
Reviewed-by: Rich Salz <rsalz@openssl.org>
We were kinda sorta using a mix of $disabled{"static-engine" and
$disabled{"dynamic-engine"} in Configure. Let's avoid confusion,
choose one of them and stick to it.
Reviewed-by: Rich Salz <rsalz@openssl.org>
An error was introduced with the setting of SHLIB in DO_GNU_SO.
A common DO_GNU_SO_COMMON that both DO_GNU_SO and DO_GNU_SO_NOCALC use
makes things clearer.
Reviewed-by: Matt Caswell <matt@openssl.org>
Because we're requiring Perl 5.10.0 and the 'parent' didn't appear
before Perl 5.10.1, we need to resort to the older parent module
declaration style, modifying @ISA.
Reviewed-by: Andy Polyakov <appro@openssl.org>
GNU make will re-exec if (it thinks that) the Makefile has changed.
Just having the target Makefile seems to make it think it has, so we
end up in a look where GNU make re-execs for ever.
The fix is easy, just remove the Makefile target and have the depend
target run the recipe on its own instead of depending on Makefile.
Reviewed-by: Rich Salz <rsalz@openssl.org>
They depend on this feature because they use the engine ossltest,
which is only available as a dynamic engine.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Until now, the engines in engines/ were only built as dynamicaly
loadable ones if shared libraries were built.
We not dissociate the two and can build dynamicaly loadable engines
even if we only build static libcrypto and libssl. This is controlled
with the option (enable|disable|no)-static-engine, defaulting to
no-static-engine.
Note that the engines in crypto/engine/ (dynamic and cryptodev) will
always be built into libcrypto.
Reviewed-by: Rich Salz <rsalz@openssl.org>
This takes us away from the idea that we know exactly how our static
libraries are going to get used. Instead, we make them available to
build shareable things with, be it other shared libraries or DSOs.
On the other hand, we also have greater control of when the shared
library cflags. They will never be used with object files meant got
binaries, such as apps/openssl or test/test*.
With unified, we take this a bit further and prepare for having to
deal with extra cflags specifically to be used with DSOs (dynamic
engines), libraries and binaries (applications).
Reviewed-by: Rich Salz <rsalz@openssl.org>
Depending on Makefile meant that a new attempt to rebuild the Makefile
with "new" dependency data was done all the time, uncontrolled. Better
to depend on configdata.pm, which truly only changes with reconfiguration.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Ben Laurie <ben@openssl.org>
Remove old code that handled various invalid DSA formats in ancient
software.
This also fixes a double free bug when parsing malformed DSA private keys.
Thanks to Adam Langley (Google/BoringSSL) for discovering this bug using
libFuzzer.
CVE-2016-0705
Reviewed-by: Emilia Käsper <emilia@openssl.org>
Adapted from BoringSSL. Added a test.
The extension parsing code is already attempting to already handle this for
some individual extensions, but it is doing so inconsistently. Duplicate
efforts in individual extension parsing will be cleaned up in a follow-up.
Reviewed-by: Stephen Henson <steve@openssl.org>
This silences the memory sanitizer. All fields were already correctly
initialized but the struct padding wasn't, causing an uninitialized read
warning.
Reviewed-by: Tim Hudson <tjh@openssl.org>
So far, MingW shared libraries were named like this
libeay32.dll + libeay32.dll.a
ssleay32.dll + ssleay32.dll.a
That naming scheme is antiquated, a reminicense of SSLeay. We're
therefore changing the scheme to something that's more like the rest
of OpenSSL.
There are two factors to remember:
- Windows libraries have no recorded SOvers, which means that the
shared library version must be encoded in the name. According to
some, it's unwise to encode extra periods in a Windows file name,
so we convert version number periods to underscores.
- MingW has multilib ability. However, DLLs need to reside with the
binaries that use them, so to allow both 32-bit and 64-bit DLLs to
reside in the same place, we add '-x64' in the name of the 64-bit
ones.
The resulting name scheme (for SOver 1.1) is this:
on x86:
libcrypto-1_1.dll + libcrypto.dll.a
libssl-1_1.dll + libssl.dll.a
on x86_64:
libcrypto-1_1-x64.dll + libcrypto.dll.a
libssl-1_1-x64.dll + libssl.dll.a
An observation is that the import lib is the same for both
architectures. Not to worry, though, as they will be installed in
PREFIX/lib/ for x86 and PREFIX/lib64/ for x86_64.
As a side effect, MingW got its own targets in Makefile.shared.
link_dso.mingw-shared and link_app.mingw-shared are aliases for the
corresponding cygwin-shared targets. link_shlib.mingw-shared is,
however, a target separated from the cygwin one.
Reviewed-by: Andy Polyakov <appro@openssl.org>
Better libclean that removes the exact files that have been built,
nothing more and nothing less.
Corrected typo
A couple of editorial changes.
Reviewed-by: Andy Polyakov <appro@openssl.org>
Since we're using the acronym DSO everywhere else and that's a common
name for that kind of object, we might as well do so here as well.
Reviewed-by: Andy Polyakov <appro@openssl.org>
Instead of having the installation recipe rely on special knowledge,
feed it with information, including what shared library files belong
together. For Cygwin and Mingw, that's the .dll and its import
library .dll.a. For Unixen, it's the shared library file name with SO
version and the one without.
Reviewed-by: Andy Polyakov <appro@openssl.org>
The engine DSOs were named as if they were shared libraries, and could
end up having all sorts of fancy names:
Cygwin: cygFOO.dll
Mingw: FOOeay32.dll
Unix: libFOO.so / libFOO.sl / libFOO.dylib / ...
This may be confusing, since they look like libraries one should link
with at link time, when they're just DSOs.
It's therefore time to rename them, and do it consistently on all
platforms:
Cygwin & Mingw: FOO.dll
Unix: FOO.{so,sl,dylib,...}
Interestingly enough, the MSVC and VMS builds always did it this way.
Reviewed-by: Andy Polyakov <appro@openssl.org>
Because we know for certain that the link_shlib targets are used
exclusively for shared libraries (libcrypto and libssl) and that they
must have an associated .num file, we don't need to check the library
name to produce an ld script. Just do it unconditionally.
link_shlib.linux-shared can be simplified further, as most of it is
exactly the same as $(DO_GNU_SO) with just one variable modification.
Reviewed-by: Andy Polyakov <appro@openssl.org>
Originally, the Makefile.shared targets described what they used as
input for a shared object, be it a shared library or a DSO. It turned
out, however, that the link_o targets were used exclusively for
engines and the link_a targets were for libcrypto and libssl.
This rename fest turns and indication on the kind of input the targets
get to the intention with using them.
Reviewed-by: Andy Polyakov <appro@openssl.org>
Then it can pass around the information where it belongs. The
Makefile templates pick it up along with other target data, the
DSO module gets to pick up the information through
crypto/include/internal/dso_conf.h
Reviewed-by: Andy Polyakov <appro@openssl.org>
- install_sw had a display of text that belongs under the install target
- previous layout installed architecture dependent files in
dev:['prefix'.'arch'.LIB], dev:['prefix'.'arch'.EXE] and
dev:['prefix'.'arch'.ENGINES]. Changed to dev:['prefix'.LIB.'arch'],
dev:['prefix'.EXE.'arch'] and dev:['prefix'.ENGINES.'arch'] instead.
Reviewed-by: Andy Polyakov <appro@openssl.org>
This is done with a simple file name comparison. We could think of
something more elegant in the future.
Reviewed-by: Andy Polyakov <appro@openssl.org>
Adding uplink and applink to some builds was done by "magic", the
configuration for "mingw" only had a macro definition, the Configure
would react to its presence by adding the uplink source files to
cpuid_asm_src, and crypto/build.info inherited dance to get it
compiled, and Makefile.shared made sure applink.o would be
appropriately linked in. That was a lot under the hood.
To replace this, we create a few template configurations in
Configurations/00-base-templates.conf, inherit one of them in the
"mingw" configuration, the rest is just about refering to the
$target{apps_aux_src} / $target{apps_obj} in the right places.
Reviewed-by: Andy Polyakov <appro@openssl.org>
VMS DIFF tries to calculate all the differences, which is slower than
just reading the files and stopping at the first difference. The
latter doesn't exist as a command, so the problem is solved with perl
and File::Compare (has been in core perl since very early version 5).
Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
DCL may be in extended parsing style, which makes it less case
insensitive, so when removing a string from another, make sure to get
casing correctly.
Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
This isn't the fully featured combination of compiler generated
dependency files and Makefile include directives, but a cheaper
variant of the same.
The dependency files are generated automatically, but then we have the
usual "depend" target. However, we depend on it in the bigger phony
targets that are the most likely to be used. That make this feature
automatic enough.
A side effect is that we can't use the build file's timestamp to check
if reconfiguring might be in order. In its place, we use a flag file
that depends on Configure and the build file template and depend on it
in spots where it makes sense to check for the need to reconfigure.
Reviewed-by: Rich Salz <rsalz@openssl.org>
The uninstall_sw target tried to 'make uninstall' in all subdirs.
Change it to only go into $(INSTALL_SUBS), just like install_sw does.
Reviewed-by: Rich Salz <rsalz@openssl.org>
When cross compiling, we may end up with someting like apps/openssl.exe
and a number of test/*.exe. However, util/shlib_wrap.sh doesn't know
what the executable extension should be, if any, so we need to make
sure it has access to that information when testing, since
OpenSSL::Test uses that script to execute all programs.
Reviewed-by: Rich Salz <rsalz@openssl.org>
All those flags existed because we had all the dependencies versioned
in the repository, and wanted to have it be consistent, no matter what
the local configuration was. Now that the dependencies are gone from
the versioned Makefile.ins, it makes much more sense to use the exact
same flags as when compiling the object files.
Reviewed-by: Rich Salz <rsalz@openssl.org>
.d (.MMS in the VMS world) files with just dependencies are built from
exactly the same conditions as the object files. Therefore, the rules
for them can be built at the same time as the rules for the
corresponding object files.
This removes the requirement for a src2dep function in the build file
templates, and for common.tmpl to call it. In the end, the existence
of depend files is entirely up to the build file.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Add -DBIO_DEBUG to --strict-warnings.
Remove comments about outdated debugging ifdef guards.
Remove md_rand ifdef guarding an assert; it doesn't seem used.
Remove the conf guards in conf_api since we use OPENSSL_assert, not assert.
For pkcs12 stuff put OPENSSL_ in front of the macro name.
Merge TLS_DEBUG into SSL_DEBUG.
Various things just turned on/off asserts, mainly for checking non-NULL
arguments, which is now removed: camellia, bn_ctx, crypto/modes.
Remove some old debug code, that basically just printed things to stderr:
DEBUG_PRINT_UNKNOWN_CIPHERSUITES, DEBUG_ZLIB, OPENSSL_RI_DEBUG,
RL_DEBUG, RSA_DEBUG, SCRYPT_DEBUG.
Remove OPENSSL_SSL_DEBUG_BROKEN_PROTOCOL.
Reviewed-by: Richard Levitte <levitte@openssl.org>
enc:
- typo in -base64 option
- missing help opt text
ocsp, req, rsautl, s_client:
- missing help opt text
Signed-off-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Tim Hudson <tjh@openssl.org>
The windows thread stop code was erroneously not just deleting the thread
local variable on thread stop, but also deleting the thread local *key*
(thus removing thread local data for *all* threads in one go!).
Reviewed-by: Rich Salz <rsalz@openssl.org>
Certain code paths in tls_decrypt_ticket could return early without first
freeing the HMAC_CTX or the EVP_CIPHER_CTX.
Reviewed-by: Rich Salz <rsalz@openssl.org>
As handshake_func is a function pointer, it should compare to NULL
Signed-off-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
Although I explicitly don't care about the tinfoil-hat reason given in
the initial opening of RT#3628, that "paths usually contain private
information", there *are* situations where it's useful to eliminate the
filenames from the compiled binary.
The two reasons we do care about in the context of firmware such as EDK2
are that it allows for a smaller footprint, and it is also a necessary
component of a binary-reproducible build.
To that end, introduce OPENSSL_FILE and OPENSSL_LINE macros, defining
them to __FILE__ and __LINE__ respectively in the normal case, but to
"" and 0 when OPENSSL_NO_FILENAMES is set.
This is mostly a naïve invocation of
$ sed 's/__\([FL]I[NL]E\)__/OPENSSL_\1/g' -i `git grep -l __LINE__`
but with a few instances change to just print the function name instead
(although those probably need to die anyway) and test cases left untouched.
Signed-off-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Tim Hudson <tjh@openssl.org>
For example, this works instead of giving a big error message (note
the lack of '--unified'):
mkdir ../_build
(cd ../_build/; ../openssl-src/config; make)
Reviewed-by: Andy Polyakov <appro@openssl.org>
The previous fix wasn't right.
Also, change all (^|\s) and (\s|$) constructs to (?:^|\s) and (?:\s|$).
Perl seems to like that better.
Reviewed-by: Andy Polyakov <appro@openssl.org>
When OPENSSL_NO_ASYNC is set, make ASYNC_{un,}block_pause() do nothing.
This prevents md_rand.c from failing to build. Probably better to do it
this way than to wrap every instance in an explicit #ifdef.
A bunch of new socket code got added to a new file crypto/bio/b_addr.c.
Make it all go away if OPENSSL_NO_SOCK is defined.
Allow configuration with no-ripemd, no-ts, no-ui
We use these for the UEFI build.
Also remove the 'Really???' comment from no-err and no-locking. We use
those too.
We need to drop the crypto/engine directory from the build too, and also
set OPENSSL_NO_ENGINE
Signed-off-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Tim Hudson <tjh@openssl.org>
Commit e634b448c ("Defines OSSL_SSIZE_MAX") introduced a definition of
OSSL_SSIZE_MAX which broke the UEFI build. Fix that by making UEFI take
the same definition as Ultrix (ssize_t == int).
Signed-off-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
We don't have atexit() in the EDK2 environment. Firmware never exits.
Signed-off-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
Commit 05c7b1631 ("Implement the use of heap manipulator implementions")
added 'file' and 'line' arguments to CRYPTO_free() and friends, but neglected
to fix up the !IMPLEMENTED case within CRYPTO_secure_free(). Add the missing
arguments there too.
Signed-off-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
- Make use of the functions given through CRYPTO_set_mem_functions().
- CRYPTO_free(), CRYPTO_clear_free() and CRYPTO_secure_free() now receive
__FILE__ and __LINE__.
- The API for CRYPTO_set_mem_functions() and CRYPTO_get_mem_functions()
is slightly changed, the implementation for free() now takes a couple
of extra arguments, taking __FILE__ and __LINE__.
- The CRYPTO_ memory functions will *always* receive __FILE__ and __LINE__
from the corresponding OPENSSL_ macros, regardless of if crypto-mdebug
has been enabled or not. The reason is that if someone swaps out the
malloc(), realloc() and free() implementations, we can't know if they
will use them or not.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Macro definitions "should" be found in $config{defines}, but some
configs haven't transfered macro definitions from their 'cflags'
settings (which isn't mandatory anyway), so check both places.
Reviewed-by: Andy Polyakov <appro@openssl.org>
This check is meaningless on VMS and only produce an error because the
underlying shell (DCL) doesn't understand sh syntax such as '2>&1'.
Reviewed-by: Andy Polyakov <appro@openssl.org>
Depending on user preferences, Configure might get something like
--PREFIX=blah just as well as --prefix=blah, or "SHARED" just as well
as "shared". On VMS, let's therefore lowercase at least the portion
of the argument before a possible equal sign.
For good measure, we lowercase the arguments to be checked in
config.com as well. The original argument is sent on to Configure,
however.
Reviewed-by: Andy Polyakov <appro@openssl.org>
A long time ago, Solaris cc didn't seem to handle -Wl, linker options,
while gcc on Solaris required it. Since then, Solaris cc has
developed to understand -Wl, options, and our little dance to figure
out how to pass linker options to the C compiler that's used isn't
needed any more.
Reviewed-by: Andy Polyakov <appro@openssl.org>
That variable isn't for us, it's for any user, distributor or package
builder that wants one after the section number. "ssl" seems to be
popular...
Reviewed-by: Matt Caswell <matt@openssl.org>
mk1mf was wondering about the options no-heartbeats and
no-crypto-mdebug-backtrace, so we add option hooks them. They only
need to become OPENSSL_NO_ macros in opensslconf.h, so nothing
additional needs to be done.
Also, add "-DOPENSSL_PIC" when shared libraries are produced.
Reviewed-by: Andy Polyakov <appro@openssl.org>
Three header files from crypto/include/internal were used by
util/mkdef.pl. This should never be needed. Some test program used
these, which made it a valid reason at the time to make the some
internal symbols public in the shared libraries, but that's not the
case any more.
However, to be able to link libssl.so, some symbols found in
include/internal headers still need to be made public.
Reviewed-by: Andy Polyakov <appro@openssl.org>
On some platforms, the implementation is such that a signed char
triggers a warning when used with is*() functions. On others, the
behavior is outright buggy when presented with a char that happens
to get promoted to a negative integer.
The safest thing is to cast the char that's used to an unsigned char.
Reviewed-by: Andy Polyakov <appro@openssl.org>
To force it on anyone using --strict-warnings was the wrong move, as
this is an option best left to those who know what they're doing.
Use with care!
Reviewed-by: Andy Polyakov <appro@openssl.org>
DllMain is a symbol that needs to be global, but no one needs to know.
However, some compilers will warn if there isn't a declaration before
the function is defined. Just add a declaration before the function
definition.
Reviewed-by: Kurt Roeckx <kurt@openssl.org>
Most of the times, it seems that socklen_t is unsigned.
Unfortunately, this isn't always the case, and it doesn't compare with
a size_t without warning.
A cast resolves the issue.
Reviewed-by: Kurt Roeckx <kurt@openssl.org>
While IO::Socket::IP is a core perl module (since Perl v5.19.8, or so
says corelist), IO::Socket::INET6 has been around longer, is said to
be more widely deployed, and most importantly, seems to have less bugs
hitting us. We therefore prefer IO::Socket::INET6, and only fall back
to IO::Socket::IP if the former doesn't exist on the local system.
Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
It seems that on some platforms, the perlasm scripts call the C
compiler for certain checks. These scripts need the environment
variable CC to have the C compiler command.
Reviewed-by: Rich Salz <rsalz@openssl.org>
The installation of man files and html files alike didn't properly
check that file names with different casing could be the same on
case-insensitive file systems. This change fixes that.
Reviewed-by: Rich Salz <rsalz@openssl.org>
The ocsp utility is something of a jack-of-all-trades; most anything
related to the OCSP can be done with it. In particular, the manual
page calls out that it can be used as either a client or a server
of the protocol, but there are also a few things that it can do
which do not quite fit into either role, such as encoding an OCSP
request but not sending it, printing out a text form of an OCSP
response (or request) from a file akin to the asn1parse utility,
or performing a lookup into the server-side revocation database
without actually sending a request or response. All three of these
are documented as examples in the manual page, but the documentation
prior to this commit is somewhat misleading, in that when printing
the text form of an OCSP response, the code also attempts to
verify the response, displaying an error message and returning
failure if the response does not verify. (It is possible that
the response would be able to verify with the given example, since
the default trust roots are used for that verification, but OCSP
responses frequently have alternate certification authorities
that would require passing -CAfile or -CApath for verification.)
Tidy up the documentation by passing -noverify for the case of
converting from binary to textual representation, and also
change a few instances of -respin to -reqin as appropriate, note
that the -url option provides the same functionality as the -host
and -path options, clarify that the example that saves an OCSP
response to a file will also perform verification on that response,
and fix a couple grammar nits in the manual page.
Also remove an always-true conditional for rdb != NULL -- there
are no codepaths in which it could be initialized at the time of
this check.
Signed-off-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Kurt Roeckx <kurt@openssl.org>
The previous method had some unfortunate consequences with
--strict-warnings. To counteract, revert part of the previous change
and move down the block of code that adds the user cflags and defines.
Reviewed-by: Rich Salz <rsalz@openssl.org>
In the early stages of creating the new test framework,
00-test_checkexes was a temporary check to ensure we had a recipe for
every test program in test/. By now, this test has fulfilled its
purpose, and we've learned how to make recipes properly. It's time
for this check to go away.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Removes SSIZE_MAX definition from bss_bio.c and changes that file to use
OSSL_SSIZE_MAX.
No need to account for OPENSSL_SYS_VXWORKS, since that never actually
gets defined anywhere. It must be a historical artifact.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Ben Laurie <ben@openssl.org>
There was a catch 22, where 'make depend' directly after configuring
in an otherwise pristine build tree would fail because buildinf.h
didn't exist yet.
This change has the depend building targets depend on the same other
targets as the object file building targets, so the generation of
buildinf.h and similar files would kick in during 'make depend'.
Reviewed-by: Rich Salz <rsalz@openssl.org>
It's never problem if CRYPTO_ctr128_encrypt is called from EVP, because
buffer in question is always aligned within EVP_CIPHER_CTX structure.
RT#4218
Reviewed-by: Richard Levitte <levitte@openssl.org>
INSTALL_PREFIX is a confusing name, as there's also --prefix.
Instead, tag along with the rest of the open source world and adopt
the Makefile variable DESTDIR to designate the desired staging
directory.
The Configure option --install_prefix is removed, the only way to
designate a staging directory is with the Makefile variable (this is
also implemented for VMS' descrip.mms et al).
Reviewed-by: Rich Salz <rsalz@openssl.org>
Not all git versions understand **/Makefile, but all recognize that
filename without any path applies to all directories.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Contemporary Xcode gcc is a front-end to clang, so that explicit
gcc build is actually redundant on MacOS X.
Reviewed-by: Richard Levitte <levitte@openssl.org>
If the environment variable HARNESS_ACTIVE isn't defined or
HARNESS_VERBOSE is defined, it's probable that lots of output is
desired.
Reviewed-by: Rich Salz <rsalz@openssl.org>
The logging that was performed in OpenSSL::Test was initially set up
as a means not to let messages that test programs write to STDERR get
displayed when a test isn't running in verbose mode. However, the way
it was implemented, it meant that those messages were never displayed,
and you had to look in a test log. This also meant that output to
STDERR and output to STDOUT got broken apart, which isn't optimal.
So, we remove the whole test log file implementation, and instead,
we're sending STDERR to the null device unless one of these conditions
apply:
- the test recipe already redirects stderr. Just let it.
- the environment variable HARNESS_ACTIVE is undefined, meaning the
recipe is run directly as a perl script instead of being harnessed
by Test::Harness
- the environment variable HARNESS_VERBOSE is set.
Getting a full log of the tests now becomes as simple as this:
HARNESS_VERBOSE=yes make test 2>&1 | tee tests.log
Reviewed-by: Rich Salz <rsalz@openssl.org>
The actual bug with current getnameinfo() on VMS is not that it puts
gibberish in the service buffer, but that it doesn't touch it at all.
The gibberish we dealt with before was simply stuff that happened to
be on the stack.
It's better to initialise the service buffer properly (with the empty
string) and check if it's still an empty string after the
getnameinfo() call, and fill it with the direct numerical translation
of the raw port if that's the case.
Reviewed-by: Rich Salz <rsalz@openssl.org>
On VMS, periods in directory names weren't allowed. To counter that,
unpackers such as VMSTAR convert periods in directory names to
underscores. We need to count that in and add an alternative library
path for Text::Template.
Reviewed-by: Rich Salz <rsalz@openssl.org>
In the previous commit to change all chomp to a more flexible regexp,
Configure was forgotten. This completes the change.
Reviewed-by: Andy Polyakov <appro@openssl.org>
apps/progs.pl counted on the caller to provide the exact command
files. The unified build doesn't have that knowledge, and the easier
and more flexible thing to do is to feed it all the apps/*.c files and
let it figure out the command names by looking inside (looking for
/int ([a-z0-9][a-z0-9_]*)_main\(int argc,/).
Also, add it to the generate command, since it's a versioned file.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Once upon a time, there was chop, which somply chopped off the last
character of $_ or a given variable, and it was used to take off the
EOL character (\n) of strings.
... but then, you had to check for the presence of such character.
So came chomp, the better chop which checks for \n before chopping it
off. And this worked well, as long as Perl made internally sure that
all EOLs were converted to \n.
These days, though, there seems to be a mixture of perls, so lines
from files in the "wrong" environment might have \r\n as EOL, or just
\r (Mac OS, unless I'm misinformed).
So it's time we went for the more generic variant and use s|\R$||, the
better chomp which recognises all kinds of known EOLs and chops them
off.
A few chops were left alone, as they are use as surgical tools to
remove one last slash or one last comma.
NOTE: \R came with perl 5.10.0. It means that from now on, our
scripts will fail with any older version.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Remove support for static ECDH ciphersuites. They require ECDH keys
in certificates and don't support forward secrecy.
Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
Trouble is that LINK variable assignment in make-file interferes with
LINK environment variable, which can be used to modify Microsoft's
LINK.EXE behaviour.
RT#4289
Reviewed-by: Richard Levitte <levitte@openssl.org>
Commit 7823d792d0 added DEFINE_LHASH_OF
to a C source file. DEFINE_LHASH_OF() and DEFINE_STACK_OF() must
be used only in header files to avoid clang warnings for unused
static-inline functions.
Reviewed-by: Rich Salz <rsalz@openssl.org>
To enable heartbeats for DTLS, configure with enable-heartbeats.
Heartbeats for TLS have been completely removed.
This addresses RT 3647
Reviewed-by: Richard Levitte <levitte@openssl.org>
With this, Cygwin and Mingw builds stand a much better chance to be
able to build outside of the source tree with the unified build.
Reviewed-by: Rich Salz <rsalz@openssl.org>
On Windows POSIX layers, two files are produced for a shared library,
there's {shlibname}.dll and there's the import library {libname}.dll.a
On some/most Unix platforms, a {shlibname}.{sover}.so and a symlink
{shlibname}.so are produced.
For each of them, unix-Makefile.tmpl was entirely consistent on which
to have as a target when building a shared library or which to use as
dependency.
This change clears this up and makes it consistent, we use the
simplest form possible, {lib}.dll.a on Windows POSIX layers and
{shlibname}.so on Unix platforms. No exception.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Some keys are attached to the full RSA CSP which doesn't support SHA2
algorithms: uses the AES CSP if present.
Reviewed-by: Tim Hudson <tjh@openssl.org>
If someone runs a mixed unixmake / unified environment (the unified
build tree would obviously be out of the source tree), the unified
build will pick up on the unixmake crypto/buildinf.h because of
assumptions made around this sort of declaration (found in
crypto/build.info):
DEPENDS[cversion.o]=buildinf.h
The assumption was that if such a header could be found in the source
tree, that was the one to depend on, otherwise it would assume it
should be in the build tree.
This change makes sure that sort of mix-up won't happen again.
Reviewed-by: Rich Salz <rsalz@openssl.org>
It's not necessary for a pristine source, and a developer that makes
changes usually knows what to do.
Also, there was this mechanism that would do a "make depend"
automatically which hasn't been used for so many years. Removed as
well.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Some files in crypto/bn depend on internal/bn_conf.h, and so does
test/bntest. Therefore, we add another inclusion directory.
Reviewed-by: Rich Salz <rsalz@openssl.org>
As noted already, some platforms don't fill in ai_protocol as
expected. To circumvent that, we have BIO_ADDRINFO_protocol() to
compute a sensible answer in that case.
Reviewed-by: Kurt Roeckx <kurt@openssl.org>
Error codes are printed in hex, and previous OpenSSL versions expected
the error codes to be provided to errstr in hex. In 1.1.0, for some
reason, it was expecting them to be decimal.
Reviewed-by: Richard Levitte <levitte@openssl.org>
The functions that have been deprecated by the auto init changes are
now guarded with deprecation checks, so it's fairly easy to see if
they can be used.
In test/dtlsv1listentest, we simply remove all init and cleanup code,
as they are call automatically when needed.
Reviewed-by: Matt Caswell <matt@openssl.org>
Because some platforms won't will in any value in ai_protocol, there's
no point using it if we already know what it should be.
Reviewed-by: Rich Salz <rsalz@openssl.org>
It seems that some platforms' getaddrinfo don't fill in the
ai_protocol field properly. On those, the assertion
'protocol == BIO_ADDRINFO_protocol(res)' will fail. Best to remove
it.
Reviewed-by: Kurt Roeckx <kurt@openssl.org>
Update ciphers documentation as well (based on -04 rev of ID).
Signed-off-by: Kurt Roeckx <kurt@roeckx.be>
Reviewed-by: Rich Salz <rsalz@openssl.org>
RT: #4206, GH: #642
Because the command line definitions of OPENSSLDIR and ENGINESDIR
contain quotes, we need a variant of CFLAG where backslashes and
quotes are escaped when we produce buildinf.h
Reviewed-by: Rich Salz <rsalz@openssl.org>
If init failed we'd like to set an error code to indicate that. But if
init failed then when the error system tries to load its strings its going
to fail again. We could get into an infinite loop. Therefore we just set
a single error the first time around. After that no error is set.
Reviewed-by: Rich Salz <rsalz@openssl.org>
The new init functions can fail if the library has already been stopped. We
should be able to indicate failure with a 0 return value.
Reviewed-by: Rich Salz <rsalz@openssl.org>
The local variable tmp was declared static when it shouldn't be. This
is in the no-threads implementation, and it was immediately initialised
to something else on every invokation of the function so it doesn't break
anything...but still shouldn't be there.
Reviewed-by: Kurt Roeckx <kurt@openssl.org>
This was a developer debugging feature and was never a useful public
interface.
Added all missing X509 error codes to the verify(1) manpage, but
many still need a description beyond the associated text string.
Sorted the errors in x509_txt.c by error number.
Reviewed-by: Stephen Henson <steve@openssl.org>
The old building scripts get removed, they are hopelessly gone in bit
rot by now.
Also remove the old symbol hacks. They were needed needed to shorten
some names to 31 characters, and to resolve other symbol clashes.
Because we now compile with /NAMES=(AS_IS,SHORTENED), this is no
longer required.
Reviewed-by: Rich Salz <rsalz@openssl.org>
As part of this, change util/mkdef.pl to stop adding libraries to
depend on in its output. mkdef.pl should ONLY output a symbol
vector.
Because symbol names can't be longer than 31 characters, we use the
compiler to shorten those that are longer down to 23 characters plus
an 8 character CRC. To make sure users of our header files will pick
up on that automatically, add the DEC C supported extra headers files
__decc_include_prologue.h and __decc_include_epilogue.h.
Furthermore, we add a config.com, so VMS people can configure just as
comfortably as any Unix folks, thusly:
@config
Reviewed-by: Rich Salz <rsalz@openssl.org>
Cygwin and Mingw name their libraries a bit differently from the rest
of the POSIXly universe, we need to adapt to that.
In Makefile.tmpl, it means that some hunks will only be output
conditionally.
This also means that shared_extension for the Cygwin and Mingw
configurations in Configurations/10-main.conf are changing from .dll.a
to .dll. Makefile.shared does a fine job without having them
specified, and it's much easier to work with tucking an extra .a at
the end of files in the installation recipes than any amount of name
rewrites, especially with the support of the SHARED_NAME in the top
build.info.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Under certain conditions, one might not want to output certain
sections of a template file. This adds the functions output_off() and
output_on(), reachable inside the templates. And example usage in a
Makefile template could be this:
@ : {- output_off() if $config{no_shared}; "" -}
... lines dealing with shared libraries
@ : {- output_on() -}
Reviewed-by: Rich Salz <rsalz@openssl.org>
The logic to figure out the combinations of --prefix and --openssldir
has stayed in Configure so far, with Unix paths as defaults.
However, since we're making Configure increasingly platform agnostic,
these defaults need to change and adapt to the platform, along with
the logic to combine them.
The easiest to provide for this is to move the logic and the defaults
away from Configure and into the build files.
This also means that the definition of the macros ENGINESDIR and
OPENSSLDIR move away from include/openssl/opensslconf.h and into the
build files.
Makefile.in is adapted accordingly.
Reviewed-by: Rich Salz <rsalz@openssl.org>
With some compilers, C macros are defined differently on the command
line than on Unix. It could be that the flad to define them isn't -D,
it could also be that they need to be grouped together and not be mixed
in with the other compiler flags (that's how it's done on VMS, for
example).
On Unix family platform configurations, we can continue to have macro
definitions mixed in with the rest of the flags, so the changes in
Configurations/*.conf are kept to an absolute minimum.
Reviewed-by: Rich Salz <rsalz@openssl.org>
If you call an explicit deinit when we've not been inited then a seg
fault can occur. We should check that we've been inited before attempting
to deinit.
Reviewed-by: Rich Salz <rsalz@openssl.org>
It seems like it gives back gibberish. If we asked for a numeric
service, it's easy to check for a digit in the first position, and
if there isn't any, rewrite it using older methods.
Reviewed-by: Rich Salz <rsalz@openssl.org>
In build.info files, make the include directory in the build directory
absolute, or Configure will think it should be added to the source
directory top. Configure will turn it into a relative path if
possible.
Reviewed-by: Rich Salz <rsalz@openssl.org>
There were cases where some input was absolute, and concatenating it
to the diretory to the source or build top could fail spectacularly.
Let's check the input first to see if it's absolute.
And while we're on the subject of checking if a file or dir spec is
absolute using file_name_is_absolute() has its own quirks on VMS,
where a logical name is considered absolute under most circumstances.
This is perfectly correct from a VMS point of view, but when parsing
the build.info files, we want single word file or directory names to
only be checked syntactically. A function isabsolute() that does the
right thing is the solution.
Reviewed-by: Rich Salz <rsalz@openssl.org>
After the final use of the thread_local_inits_st we should ensure it is
set to NULL, just in case OPENSSL_INIT_thread_stop gets called again and
it tries to use garbage.
Reviewed-by: Rich Salz <rsalz@openssl.org>
With the new init framework resources aren't released until the process
exits. This means checking for mem leaks before that point finds a lot of
things! We should explicitly close down the library if we're checking for
mem leaks.
Reviewed-by: Rich Salz <rsalz@openssl.org>
version32.rc was not created on Windows. The if condition has been corrected.
Signed-off-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Tim Hudson <tjh@openssl.org>
* added missing help option messages
* ecdh_single option is removed as it is a no-op and not an option
supported in earlier versions
* ssl_ctx_security_debug() was invoked before ctx check for NULL
* trusted_first option can be removed, as it is always enabled in 1.1.
But not removed the option, require confirmation.
Signed-off-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
Various Makefile.in files have changes for auto-init/de-init. Make the
equivalent changes in build.info.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Provide some man pages for auto-init/deinit. Also update the INSTALL
documentation for information on the new Configure options implemented as
part of this.
Reviewed-by: Richard Levitte <levitte@openssl.org>
This option disables automatic loading of the crypto/ssl error strings in
order to keep statically linked executable file size down
Reviewed-by: Richard Levitte <levitte@openssl.org>
This commit provides the basis and core code for an auto initialisation
and deinitialisation framework for libcrypto and libssl. The intention is
to remove the need (in many circumstances) to call explicit initialise and
deinitialise functions. Explicit initialisation will still be an option,
and if non-default initialisation is needed then it will be required.
Similarly for de-initialisation (although this will be a lot easier since
it will bring all de-initialisation into a single function).
Reviewed-by: Richard Levitte <levitte@openssl.org>
It seems realpath() is quite buggy on VMS, or will at least give quite
surprising results. On the other hand, realpath() is the better on
Unix to clean out clutter like foo/../bar on Unix.
So we make out own function to get the absolute directory for a given
input, and use rel2abs() or realpath() depending on the platform
Configure runs on.
Issue reported by Steven M. Schweda <sms@antinode.info>
Reviewed-by: Andy Polyakov <appro@openssl.org>
To be able to run tests when we've built in a directory other than
the source tree, the testing framework needs a few adjustments.
test/testlib/OpenSSL/Test.pm needs to know where it can find
shlib_wrap.sh, and a number of other tests need to be told a different
place to find engines than what they may be able to figure out on
their own. Relying to $TOP is not enough, $SRCTOP and $BLDTOP can be
used as an alternative.
As part of this change, top_file and top_dir are removed and
srctop_file, bldtop_file, srctop_dir and bldtop_dir take their place.
Reviewed-by: Ben Laurie <ben@openssl.org>
util/mkdef.pl and Makefile.shared needs to know about the source and
the build directories.
Additionally, Makefile.shared needs to know how to build shared
libraries in a directory other than the current one.
Reviewed-by: Ben Laurie <ben@openssl.org>
This documents describes the three steps from build.info files via the
%unified_info database to the build-file templates, along with some
examples showing how the data gets processed along the way.
Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
common.tmpl will be used together with the template build file, and is
the engine that connects the information gathered from all the
build.info files with making the build file itself.
This file expects there to be a template section in the build file
template that defines a number perl functions designed to return
strings with appropriate lines for the build system at hand. The
exact functions, what they can expect as arguments and what output
they're expected to produce is documented in Configurations/README.
Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
- One typo fixed in crypto/bio/b_addr.c
- Add a comment in doc/crypto/BIO_parse_hostserv.pod to explain the
blank lines with one lonely space each.
Reviewed-by: Andy Polyakov <appro@openssl.org>
As documented both SSL_get0_dane_authority() and SSL_get0_dane_tlsa()
are expected to return a negative match depth and nothing else when
verification fails. However, this only happened when verification
failed during chain construction. Errors in verification of the
constructed chain did not have the intended effect on these functions.
This commit updates the functions to check for verify_result ==
X509_V_OK, and no longer erases any accumulated match information
when chain construction fails. Sophisticated developers can, with
care, use SSL_set_verify_result(ssl, X509_V_OK) to "peek" at TLSA
info even when verification fail. They must of course first check
and save the real error, and restore the original error as quickly
as possible. Hiding by default seems to be the safer interface.
Introduced X509_V_ERR_DANE_NO_MATCH code to signal failure to find
matching TLSA records. Previously reported via X509_V_ERR_CERT_UNTRUSTED.
This also changes the "-brief" output from s_client to include
verification results and TLSA match information.
Mentioned session resumption in code example in SSL_CTX_dane_enable(3).
Also mentioned that depths returned are relative to the verified chain
which is now available via SSL_get0_verified_chain(3).
Added a few more test-cases to danetest, that exercise the new
code.
Resolved thread safety issue in use of static buffer in
X509_verify_cert_error_string().
Fixed long-stating issue in apps/s_cb.c which always sets verify_error
to either X509_V_OK or "chain to long", code elsewhere (e.g.
s_time.c), seems to expect the actual error. [ The new chain
construction code is expected to correctly generate "chain
too long" errors, so at some point we need to drop the
work-arounds, once SSL_set_verify_depth() is also fixed to
propagate the depth to X509_STORE_CTX reliably. ]
Reviewed-by: Rich Salz <rsalz@openssl.org>
Don't cast malloc-family return values.
Also found some places where (a) blank line was missing; and (b)
the *wrong* return value was checked.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Just like File::Path::make_path, File::Path::remove_tree didn't show
up before File::Path 2.06 / perl v5.10.1, so we prefer the legacy
function here as well.
Reviewed-by: Andy Polyakov <appro@openssl.org>
File::Path::make_path didn't show up before File::Path 2.06 / perl v5.10.1.
Because we're trying to stay compatible with perl v5.10.0 and up,
it's better to use the legacy interface.
Reviewed-by: Andy Polyakov <appro@openssl.org>
This works on Linux with Make already, and allows running only specified
tests.
Reviewed-by: Ben Laurie <ben@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Previous commit 7bb196a71 attempted to "fix" a problem with the way
SSL_shutdown() behaved whilst in mid-handshake. The original behaviour had
SSL_shutdown() return immediately having taken no action if called mid-
handshake with a return value of 1 (meaning everything was shutdown
successfully). In fact the shutdown has not been successful.
Commit 7bb196a71 changed that to send a close_notify anyway and then
return. This seems to be causing some problems for some applications so
perhaps a better (much simpler) approach is revert to the previous
behaviour (no attempt at a shutdown), but return -1 (meaning the shutdown
was not successful).
This also fixes a bug where SSL_shutdown always returns 0 when shutdown
*very* early in the handshake (i.e. we are still using SSLv23_method).
Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
dgst: using digest instead of specific digest commands
the digest list specified in man dgst may be inaccurate, hence using
digest and referring to the list in digest-commands
'sha' as a digest name is no longer supported
dgst,pkeyutl cmds help cleanup
- In dgst, pkeyutl cmds, some options help was missing.
- fixed a minor typo in openssl.pod, that fixes make install.
- digest-commands was showing ‘sha’, which is not a supported digest
anymore.
Signed-off-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Tim Hudson <tjh@openssl.org>
opt_valtype 0 is same as '-' while printing cmd usage
asn1parse/ca/ciphers help cleanup
Signed-off-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
Some time ago, we had a ex_libs configuration setting that could be
divided into lflags and ex_libs. These got divided in two settings,
lflags and ex_libs, and the former was interpreted to be general
linking flags.
Unfortunately, that conclusion wasn't entirely accurate. Most of
those linking were meant to end up in a very precise position on the
linking command line, just before the spec of libraries the linking
depends on.
Back to the drawing board, we're diving things further, now having
lflags, which are linking flags that aren't depending on command line
position, plib_lflags, which are linking flags that should show up just
before the spec of libraries to depend on, and finally ex_libs, which
is the spec of extra libraries to depend on.
Also, documentation is changed in Configurations/README. This was
previously forgotten.
Reviewed-by: Kurt Roeckx <kurt@openssl.org>
Allow initial engine names as first parameters before flags.
Also add engine param to help summary
Wrote manpage
Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
Clang rightly does not like extern symbols that are not declared
in any header file, as typically these are not intended for global
visibility and are exposed in error. This was indeed the case with
various file-scope objects in dtlsv1listentest.c.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Make it clear that if we are unable to get hold of the peer address then
*peer is cleared and the family set to AF_UNSPEC.
Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
Adds a set of tests for the newly rewritten DTLSv1_listen function.
The test pokes various packets at the function and then checks
the return value and the data written out to ensure it is what we
would have expected.
Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
The recently rewriten DTLSv1_listen code does not support fragmented
ClientHello messages because fragment reassembly requires server state
which is against the whole point of DTLSv1_listen. This change adds some
partial support for fragmented ClientHellos. It requires that the cookie
must be within the initial fragment. That way any non-initial ClientHello
fragments can be dropped and fragment reassembly is not required.
Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
Adds a new function BIO_ADDR_clear to reset a BIO_ADDR back to an
unitialised state, and to set the family to AF_UNSPEC.
Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
The DTLSv1_listen function exposed details of the underlying BIO
abstraction and did not properly allow for IPv6. This commit changes the
"peer" argument to be a BIO_ADDR and makes it a first class function
(rather than a ctrl) to ensure proper type checking.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Replace all magic numbers with #defined constants except in boolean
functions that return 0 for failure and 1 for success. Avoid a
couple memory leaks in error recovery code paths. Code style
improvements.
Reviewed-by: Dr. Stephen Henson <steve@openssl.org>
Following on from earlier commits to prevent local symbols from being
exported in the shared libraries on Linux, this makes the equivalent changes
for Solaris.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Add new function EC_KEY_priv2buf() to allocated and encode private
key octet in one call. Update and simplify ASN.1 and print routines.
Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
Don't require an application to work out the appropriate buffer size for
ASN1_bn_print(), which is unsafe. Ignore the supplied buffer and allocate
it internally instead.
Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
New functions EC_KEY_oct2priv and EC_KEY_priv2oct. These are private key
equivalents of EC_POINT_oct2point and EC_POINT_point2oct which convert
between the private key octet format and EC_KEY.
Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
This uilds on the same way of checking for availability as we do in
TLSProxy. We use all IP factories we know of, starting with those who
know both IPv6 and IPv4 and ending with the one that only knows IPv4
and cache their possible success as foundation for checking the
available of each IP domain.
80-test_ssl.t has bigger chances of working on platforms that do not
run both IP domains.
Reviewed-by: Rich Salz <rsalz@openssl.org>
This is an important move if scripts want to refer to the loaded
module without having perl think it needs to be loaded (again).
Reviewed-by: Rich Salz <rsalz@openssl.org>
Add no-async option to Configure that forces ASYNC_NULL.
Related to RT1979
An embedded system or replacement C library (e.g. musl or uClibc)
may not support the *context APIs that are needed for async operation.
Compiles with musl. Ran unit tests, async tests skipped as expected.
Signed-off-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
Both getaddrinfo() and getnameinfo() have to be preceeded with a call
to BIO_sock_init().
Also, make sure to give gai_strerror() the actual error code.
Reviewed-by: Stephen Henson <steve@openssl.org>
Those even order that do not play nicely with Montgomery arithmetic
Signed-off-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Emilia Käsper <emilia@openssl.org>
In HMAC_Init_ex, NULL key signals reuse, but in single-shot HMAC,
we can allow it to signal an empty key for convenience.
Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
The test program clienthello checks TLS extensions, so there's no
point running it when no TLS protocol is available.
Reviewed-by: Ben Laurie <ben@openssl.org>
When connecting to "localhost" the Proxy's choice of client address
family may not match the server's choice address family. Without
MultiHomed => 1, the proxy may try the wrong address family first,
and give up without trying the other.
Reviewed-by: Richard Levitte <levitte@openssl.org>
This makes use of TLSProxy, which was expanded to use IO::Socket::IP
(which is a core perl module) or IO::Socket::INET6 (which is said to
be more popular) instead IO::Socket::INET if one of them is installed.
Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
s_socket.c gets brutally cleaned out and now consists of only two
functions, one for client and the other for server. They both handle
AF_INET, AF_INET6 and additionally AF_UNIX where supported. The rest
is just easy adaptation.
Both s_client and s_server get the new flags -4 and -6 to force the
use of IPv4 or IPv6 only.
Also, the default host "localhost" in s_client is removed. It's not
certain that this host is set up for both IPv4 and IPv6. For example,
Debian has "ip6-localhost" as the default hostname for [::1]. The
better way is to default |host| to NULL and rely on BIO_lookup() to
return a BIO_ADDRINFO with the appropriate loopback address for IPv4
or IPv6 as indicated by the |family| parameter.
Reviewed-by: Kurt Roeckx <kurt@openssl.org>
The control commands that previously took a struct sockaddr * have
been changed to take a BIO_ADDR * instead.
Reviewed-by: Kurt Roeckx <kurt@openssl.org>
This adds a couple of simple tests to see that SSL traffic using the
reimplemented BIO_s_accept() and BIO_s_connect() works as expected,
both on IPv4 and on IPv6.
Reviewed-by: Kurt Roeckx <kurt@openssl.org>
Because of the way bio_lcl.h is organised, we must not include
internal/cryptlib.h before it. As a matter of fact, bio_lcl.h
includes internal/cryptlib.h on its own.
Reviewed-by: Kurt Roeckx <kurt@openssl.org>
Because different platforms have different levels of support for IPv6,
different kinds of sockaddr variants, and some have getaddrinfo et al
while others don't, we could end up with a mess if ifdefs, duplicate
code and other maintainance nightmares.
Instead, we're introducing wrappers around the common form for socket
communication:
BIO_ADDR, closely related to struct sockaddr and some of its variants.
BIO_ADDRINFO, closely related to struct addrinfo.
With that comes support routines, both convenient creators and
accessors, plus a few utility functions:
BIO_parse_hostserv, takes a string of the form host:service and
splits it into host and service. It checks for * in both parts, and
converts any [ipv6-address] syntax to ust the IPv6 address.
BIO_lookup, looks up information on a host.
All routines handle IPv4 (AF_INET) and IPv6 (AF_INET6) addresses, and
there is support for local sockets (AF_UNIX) as well.
Reviewed-by: Kurt Roeckx <kurt@openssl.org>
Accept leading 0-byte in PKCS1 type 1 padding. Internally, the byte is
stripped by BN_bn2bin but external callers may have other expectations.
Reviewed-by: Kurt Roeckx<kurt@openssl.org>
CRIME protection: disable compression by default, even if OpenSSL is
compiled with zlib enabled. Applications can still enable compression by
calling SSL_CTX_clear_options(ctx, SSL_OP_NO_COMPRESSION), or by using
the SSL_CONF library to configure compression. SSL_CONF continues to
work as before:
SSL_CONF_cmd(ctx, "Options", "Compression") enables compression.
SSL_CONF_cmd(ctx, "Options", "-Compression") disables compression (now
no-op by default).
The command-line switch has changed from -no_comp to -comp.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Also fix option processing in pkeyutl to allow use of (formerly)
"out-of-order" switches that were needless implementation limitations.
Handle documented "ENGINE" form with -keyform and -peerform.
Better handling of OPENSSL_NO_ENGINE and OPENSSL_NO_RSA.
RT2018
Reviewed-by: Rich Salz <rsalz@openssl.org>
It turns out that the combination splitpath() could return an empty
string for the directory part. This doesn't play well with catdir().
Reviewed-by: Rich Salz <rsalz@openssl.org>
Add new function BN_bn2binpad() which checks the length of the output
buffer and pads the result with zeroes if necessary.
New functions BN_bn2lebinpad() and BN_lebin2bn() which use little endian
format.
Reviewed-by: Rich Salz <rsalz@openssl.org>
PACKET contents should be read-only. To achieve this, also
- constify two user callbacks
- constify BUF_reverse.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Now that we have the foundation for the "unified" build scheme in
place, we add build.info files. They have been generated from the
Makefiles in the same directories. Things that are platform specific
will appear in later commits.
Reviewed-by: Andy Polyakov <appro@openssl.org>
The "unified" build scheme revolves around small information files,
build.info, which each describe their own bit of everything that needs
to be built, using a mini-language described in Configurations/README.
The information in build.info file contain references to source files
and final result. Object files are not mentioned at all, they are
simply from source files. Because of this, all the *_obj items in
Configurations/*.conf are renamed to *_asm_src and the files listed
in the values are change from object files to their corresponding
source files. For the sake of the other build schemes, Configure
generates corresponding *_obj entries in %target.
Furthermore, the "unified" build scheme supports having a build
directory tree separate from the source directry tree.
All paths in a build.info file is assumed to be relative to its
location, either within the source tree or within the build tree.
Reviewed-by: Andy Polyakov <appro@openssl.org>
When auxiliary data contains only reject entries, continue to trust
self-signed objects just as when no auxiliary data is present.
This makes it possible to reject specific uses without changing
what's accepted (and thus overring the underlying EKU).
Added new supported certs and doubled test count from 38 to 76.
Reviewed-by: Dr. Stephen Henson <steve@openssl.org>
This includes basic constraints, key usages, issuer EKUs and auxiliary
trust OIDs (given a trust suitably related to the intended purpose).
Added tests and updated documentation.
Reviewed-by: Dr. Stephen Henson <steve@openssl.org>
d2i_ECPrivateKey always caculates the public key so there is
no need to caculate it again in eckey_priv_decode().
Reviewed-by: Rich Salz <rsalz@openssl.org>
New functions to return internal pointer for order and cofactor. This
avoids the need to allocate a new BIGNUM which to copy the value to.
Simplify code to use new functions.
Reviewed-by: Rich Salz <rsalz@openssl.org>
When the target is {something}-icc, we're doing some extra checks of
the icc compiler. However, all such targets were cleaned away in
March 2015, so this Configure section is dead code.
Reviewed-by: Rich Salz <rsalz@openssl.org>
There was an unused macro in ssl_locl.h that used an internal
type, so I removed it.
Move bio_st from bio.h to ossl_type.h
Reviewed-by: Andy Polyakov <appro@openssl.org>
top_dir() are used to create directory names, top_file() should be
used for files. In a Unixly environment, that doesn't matter, but...
Reviewed-by: Rich Salz <rsalz@openssl.org>
Not all architectures have a time_t defined the same way. To make
sure we get the same result, we need to cast &checkoffset to (intmax_t *)
and make sure that intmax_t is defined somehow.
To make really sure we don't pass a variable with the wrong size down
to opt_imax(), we use a temporary intmax_t.
Reviewed-by: Rich Salz <rsalz@openssl.org>
As a side-effect of opaque x509, ex_flags were looked up too early,
before additional policy cache updates.
Reviewed-by: Dr. Stephen Henson <steve@openssl.org>
The lflags configuration had a weird syntax with a % as separator. If
it was present, whatever came before ended up as PEX_LIBS in Makefile
(usually, this is LDFLAGS), while whatever came after ended up as
EX_LIBS.
This change splits that item into lflags and ex_libs, making their use
more explicit.
Also, PEX_LIBS in all the Makefiles are renamed to LDFLAGS.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Remove depend hacks from demos/engines.
Remove clean-depend; just call makedepend (or $CC -M) and use that.
Reviewed-by: Richard Levitte <levitte@openssl.org>
By default X509_check_trust() trusts self-signed certificates from
the trust store that have no explicit local trust/reject oids
encapsulated as a "TRUSTED CERTIFICATE" object. (See the -addtrust
and -trustout options of x509(1)).
This commit adds a flag that makes it possible to distinguish between
that implicit trust, and explicit auxiliary settings.
With flags |= X509_TRUST_NO_SS_COMPAT, a certificate is only trusted
via explicit trust settings.
Reviewed-by: Dr. Stephen Henson <steve@openssl.org>
The use of the uninitialized buffer in the RNG has no real security
benefits and is only a nuisance when using memory sanitizers.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
Add tests for have_precompute_mult for the optimised curves (nistp224,
nistp256 and nistp521) if present
Reviewed-by: Richard Levitte <levitte@openssl.org>
During precomputation if the group given is well known then we memcpy a
well known precomputation. However we go the wrong label in the code and
don't store the data properly. Consequently if we call have_precompute_mult
the data isn't there and we return 0.
RT#3600
Reviewed-by: Richard Levitte <levitte@openssl.org>
The function DH_check_pub_key() was missing some return value checks in
some calls to BN functions.
RT#4278
Reviewed-by: Andy Polyakov <appro@openssl.org>
A new return value for DH_check_pub_key was recently added:
DH_CHECK_PUBKEY_INVALID. As this is a flag which can be ORed with other
return values it should have been set to the value 4 not 3.
RT#4278
Reviewed-by: Andy Polyakov <appro@openssl.org>
This extends the existing async functionality to SSL_shutdown(), i.e.
SSL_shutdown() can now casuse an SSL_ERROR_WANT_ASYNC error to be returned
from SSL_get_error() if async mode has been enabled.
Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
Following on from the previous commit, add a test to ensure that
DH_compute_key correctly fails if passed a bad y such that:
y^q (mod p) != 1
Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
Historically OpenSSL only ever generated DH parameters based on "safe"
primes. More recently (in version 1.0.2) support was provided for
generating X9.42 style parameter files such as those required for RFC
5114 support. The primes used in such files may not be "safe". Where an
application is using DH configured with parameters based on primes that
are not "safe" then an attacker could use this fact to find a peer's
private DH exponent. This attack requires that the attacker complete
multiple handshakes in which the peer uses the same DH exponent.
A simple mitigation is to ensure that y^q (mod p) == 1
CVE-2016-0701
Issue reported by Antonio Sanso.
Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
Many options for supporting optimizations for legacy crypto on legacy
platforms have been removed. This simplifies the source code and
does not really penalize anyone.
DES_PTR (always on)
DES_RISC1, DES_RISC2 (always off)
DES_INT (always 'unsigned int')
DES_UNROLL (always on)
BF_PTR (always on) BF_PTR2 (removed)
MD2_CHAR, MD2_LONG (always 'unsigned char')
IDEA_SHORT, IDEA_LONG (always 'unsigned int')
RC2_SHORT, RC2_LONG (always 'unsigned int')
RC4_LONG (only int and char (for assembler) are supported)
RC4_CHUNK (always long), RC_CHUNK_LL (removed)
RC4_INDEX (always on)
And also make D_ENCRYPT macro more clear (@appro)
This is done in consultation with Andy.
Reviewed-by: Andy Polyakov <appro@openssl.org>
A mistake was made and the setting of this config variable got
reverted to an older behavior. This restores the latest.
Reviewed-by: Emilia Käsper <emilia@openssl.org>
It seems that Test::More doesn't like 0 tests, a line like this raises
an error and stops the recipe entirely:
plan tests => 0;
So we need to check for 0 tests beforehand and skip the subtest
explicitely in that case.
Reviewed-by: Rich Salz <rsalz@openssl.org>
$EXE_SHELL should only be used with out own programs, not with
surrounding programs such as the perl interpreter.
Reviewed-by: Matt Caswell <matt@openssl.org>
This was done by the following
find . -name '*.[ch]' | /tmp/pl
where /tmp/pl is the following three-line script:
print unless $. == 1 && m@/\* .*\.[ch] \*/@;
close ARGV if eof; # Close file to reset $.
And then some hand-editing of other files.
Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
Also removes the make variable SHARED_LIBS_LINK_EXTS, only used by
the clean-shared target.
When shared library linking was moved to the separate Makefile.shared
in commit 30afcc072a, this target was
skipped. Prior to that commit, clean-shared was invoked as a
dependency of build-shared, but afterward it was no longer referenced
anywhere in the tree.
Instead of porting the functionality over to Makefile.shared, just
remove it entirely, as it appears to be unused.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Missing SKIP: block in SSL unit tests for DTLS and TLS version tests.
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Since we're building some of our perl scripts and the result might not
end up in apps/ (*), we may need to treat them like the compile
programs we use for testing.
This introduces perlapp() and perltest(), which behave like app() and
test(), but will add the perl executable in the command line.
-----
(*) For example, with a mk1mf build, the result will end up in $(BIN_D)
Reviewed-by: Matt Caswell <matt@openssl.org>
The SSL and SSL_CTX structures are reference counted. However since libssl
was made opaque there is no way for users of the library to manipulate the
reference counts. This adds functions to enable that.
Reviewed-by: Stephen Henson <steve@openssl.org>
Enhances the routines in OpenSSL::Test::Utils for checking disabled
stuff to get their information directly from Configure instead of
'openssl list -disabled'.
Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
engines_obj changed name to padlock_obj in Configure. We need to do
the corresponding ENGINES_ASM_OBJ -> PADLOCK_ASM_OBJ in appropriate
Makefile.ins.
Reviewed-by: Rich Salz <rsalz@openssl.org>
- Small rearrangement of the TABLE and HASH printouts, and adding
printout of the "build_scheme" item
- Renamed "engines_obj" to "padlock_obj"
- Moved the runs of dofile down... it didn't quite make sense to have
that in the middle of a printout
Reviewed-by: Rich Salz <rsalz@openssl.org>
Now that we're using templates, we should warn people not to edit the
resulting file. We do it through util/dofile.pl, which is enhanced
with an option to tell what file it was called from. We also change
the calls so the template files are on the command line instead of
being redirected through standard input. That way, we can display
something like this (example taken from include/openssl/opensslconf.h):
/* WARNING: do not edit! */
/* Generated by Configure from include/openssl/opensslconf.h.in */
Reviewed-by: Rich Salz <rsalz@openssl.org>
It is time for Makefile.org to fold into the new regime and have a run
through util/dofile.pl. This forces some information out of there and
into Configure, which isn't a bad thing, it makes Configure
increasingly the center of build information, which is as it should
be.
A few extra defaults were needed in the BASE template to get rid of
warnings about missing values.
Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
Move opensslconf.h.in to include/openssl.
Split off DES,BN,RC4 stuff into separate header file
templates in crypto/include/internal/*_conf.h.in
Reviewed-by: Richard Levitte <levitte@openssl.org>
This is an internal facility, never documented, not for
public consumption. Move it into ssl (where it's only used
for DTLS).
I also made the typedef's for pqueue and pitem follow our style: they
name structures, not pointers.
Reviewed-by: Richard Levitte <levitte@openssl.org>
The explanation is that it falls back to using tools/c_rehash if
'apps/openssl rehash' isn't supported on the platform at hand.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Now that configdata.pm is the centre of information, use that instead
of Makefile to figure out reconfiguration parameters. This will help
future development with different Makefile file names.
The code to read necessary configuration data from Makefile is retained
for an easy transition to configdata.pm based information gathering. It
will be removed later on.
This change includes moving the variable $cross_compile_prefix to %config.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
When experimental-store is enabled, it does not compile due to the
change to opaque data structures.
Change CRYPTO_add() to EVP_PKEY_up_ref() as needed.
Signed-off-by: Kurt Roeckx <kurt@roeckx.be>
Reviewed-by: Rich Salz <rsalz@openssl.org>
RT: #4263, GH: #579
The turn has come to have crypto/opensslconf.h.in get run through
util/dofile.pl. The consequence is that a large number of variables
get moved to the %config table.
Also, the string variables $openssl_*, which were populated with cpp
lines, all being of the form "#define SOMETHING", were converted into
ARRAY refs in %config values, containing just the list of macros to be
defined.
Reviewed-by: Rich Salz <rsalz@openssl.org>
For this adaptation, the variables $options and $version needed to
move to %config in Configure, and why not move all other variables
holding diverse version numbers at the same time?
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Because we're using Text::Template and we know it's a non core Perl
module, we choose to bundle it into our source, for convenience.
external/perl/Downloaded.txt document what modules we choose to bundle
this way and exactly where we downloaded it from.
With this changes comes the transfer module for with_fallback.
Reviewed-by: Rich Salz <rsalz@openssl.org>
For our own convenience, we need a mechanism to be able to fall back
on bundled Perl modules. It's a minimal package that's called like
this:
use with_fallback qw(Module1 Module2 ...);
For each module, it will try to require them from the system
installation, and failing that, it will temporarly add external/perl
and try to require transfer::{ModuleName}. It requires that each
bundled Perl modules is accompanied by a small transfer module
(external/perl/transfer/ModuleName.pm in our example) that knows
exactly what to load.
Reviewed-by: Rich Salz <rsalz@openssl.org>
apps/CA.pl and tools/c_rehash are built from template files. So far,
this was done by Configure, which created its own problems as it
forced everyone to reconfigure just because one of the template files
had changed.
Instead, have those files created as part of the normal build in apps/
and in tools/.
Furthermore, this prepares for a future where Configure may produce
entirely other build files than Makefile, and the latter can't be
guaranteed to be the holder of all information for other scripts.
Instead, configdata.pm (described below) becomes the center of
configuration information.
This introduces a few new things:
%config a hash table to hold all kinds of configuration data
that can be used by any other script.
configdata.pm a perl module that Configure writes. It currently
holds the hash tables %config and %target.
util/dofile.pl a script that takes a template on STDIN and outputs
the result after applying configuration data on it.
It's supposed to be called like this:
perl -I$(TOP) -Mconfigdata < template > result
or
perl -I$(TOP) -Mconfigdata templ1 templ2 ... > result
Note: util/dofile.pl requires Text::Template.
As part of this changed, remove a number of variables that are really
just copies of entries in %target, and use %target directly. The
exceptions are $target{cflags} and $target{lflags}, they do get copied
to $cflags and $lflags. The reason for this is that those variable
potentially go through a lot of changes and would rather deserve a
place in %config. That, however, is for another commit.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
It's time for print_table_entry to get a bit of refreshment. The way it
was put together, we needed to maintain the list of known configuration
keys of interest twice, in different shapes. This is error prone, so
move the list of strings to a common list for all printing cases, and
use simple formatting of lines to do the actual printout based on that
list.
Reviewed-by: Rich Salz <rsalz@openssl.org>
The code is trying to interpolate the value of the BASE_SECTION macro,
but due to excess escaping, it instead prints the string "BASE_SECTION".
Signed-off-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Kurt Roeckx <kurt@openssl.org>
Some things to ignore need to be properly rooted, and use a bit more
precision on ignoring 'lib', as that maybe be a perfectly valid
directory name to add into git elsewhere in the source tree.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Time to get rid of @MK1MF_Builds and introduce a more flexible
'build_scheme' configuration key. Its value may be a string or an
array of strings, meaning we need to teach resolve_config how to
handle ARRAY referenses.
The build scheme is a word that selects a function to create the
appropriate result files for a certain configuration. Currently valid
build schemes aer "mk1mf" and "unixmake", the plan is however to add
at least one other for a more universal build scheme.
Incidently, this also adds the functions 'add' and 'add_before', which
can be used in a configuration, so instead of having to repeatedly
write a sub like this:
key1 => sub { join(" ", @_, "myvalues"); },
key2 => sub { join(" ", "myvalues", @_); },
one could write this:
key1 => add(" ", "myvalues"),
key2 => add_before(" ", "myvalues"),
The good point with 'add' and 'add_before' is that they handle
inheritances where the values are a misture of scalars and ARRAYs. If
there are any ARRAY to be found, the resulting value will be an ARRAY,
otherwise it will be a scalar with all the incoming valued joined
together with the separator given as first argument to add/add_before.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Move the documentation of the target configuration form to
Configurations/README.
Move initial assembler object templates to
Configurations/00-BASE-templates.conf.
Furthermore, remove all variables containing the names of the
non-assembler object files and make a BASE template of them instead.
The values from this templates are used as defaults as is. The
remaining manipulation of data when assembler modules are used is done
only when $no_asm is false.
While doing this, clean out some other related variables that aren't
used anywhere.
Also, we had to move the resolution of the chosen target a bit, or the
function 'asm' would never catch a true $no_asm... this hasn't
mattered before we've moved it all to the BASE template, but now it
does.
At the same time, add the default for the 'unistd' key to the BASE
template.
Reviewed-by: Rich Salz <rsalz@openssl.org>
--prefix is now exclusively used for software and manual installation.
--openssldir is not exclusively used as a default location for certs,
keys and the default openssl.cnf.
This change is made to bring clarity, to have the two less
intertwined, and to be more compatible with the usual ways of software
installation.
Please change your habits and scripts to use --prefix rather than
--openssldir for installation location now.
Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
It's time to refactor the handling of %disabled so that all
information of value is in the same place. We have so far had a few
cascading disable rules in form of code, far away from %disabled.
Instead, bring that information to the array @disable_cascade, which
is a list of pairs of the form 'test => descendents'. The test part
can be a string, and it's simply checked if that string is a key in
%disabled, or it can be a CODEref to do a more complex test. If the
test comes true, then all descendents are disabled. This check is
performed until there are no more things that need to be disabled.
Also, $default_depflags is constructed from the information in
%disabled instead of being a separate string. While a string of its
own is visually appealing, it's much too easy to forget to update it
when something is changed in %disabled.
Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
The way the "reconf"/"reconfigure" argument is handled is overly
complicated. Just grep for it first, and if it is there in the
current arguments, get the old command line arguments from Makefile.
While we're at it, make the Makefile variable CONFIGURE_ARGS hold the
value as a perl list of strings. This makes things much safer in case
one of the arguments would contain a space. Since CONFIGURE_ARGS is
used for nothing else, there's no harm in this.
Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
It is sometimes useful (especially in automated tests) to supply
multiple trusted or untrusted certificates via separate files rather
than have to prepare a single file containing them all.
To that end, change verify(1) to accept these options zero or more
times. Also automatically set -no-CAfile and -no-CApath when
-trusted is specified.
Improve verify(1) documentation, which could still use some work.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Returning untrusted is enough for for full chains that end in
self-signed roots, because when explicit trust is specified it
suppresses the default blanket trust of self-signed objects.
But for partial chains, this is not enough, because absent a similar
trust-self-signed policy, non matching EKUs are indistinguishable
from lack of EKU constraints.
Therefore, failure to match any trusted purpose must trigger an
explicit reject.
Reviewed-by: Richard Levitte <levitte@openssl.org>
These can be re-generated via:
cd test/certs; ./setup.sh
if need be. The keys are all RSA 2048-bit keys, but it is possible
to change that via environment variables.
cd test/certs
rm -f *-key.pem *-key2.pem
OPENSSL_KEYALG=rsa OPENSSL_KEYBITS=3072 ./setup.sh
cd test/certs
rm -f *-key.pem *-key2.pem
OPENSSL_KEYALG=ecdsa OPENSSL_KEYBITS=secp384r1 ./setup.sh
...
Keys are re-used if already present, so the environment variables
are only used when generating any keys that are missing. Hence
the "rm -f"
Reviewed-by: Richard Levitte <levitte@openssl.org>
When DANE-EE(3) matches or either of DANE-EE/PKIX-EE fails, we don't
build a chain at all, but rather succeed or fail with just the leaf
certificate. In either case also check for Suite-B violations.
As unlikely as it may seem that anyone would enable both DANE and
Suite-B, we should do what the application asks.
Took the opportunity to eliminate the "cb" variables in x509_vfy.c,
just call ctx->verify_cb(ok, ctx)
Reviewed-by: Dr. Stephen Henson <steve@openssl.org>
Split the read_config function into read_config that ONLY reads the
configuration files but doesn't try to resolve any of the
inheritances, and resolve_config which resolves the inheritance chain
of a given target. Move them to the bottom of Configure, with the
rest of the helpers.
Have a new small hash table, %target, which will hold the values for
the target the user requested. This also means that all access to the
current target data can be reduced from '$table{$target}->{key}' to a
mere '$target{key}'.
While we're at it, the old string formatted configurations are getting
obsolete, so they may as well get deprecated entirely.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Get rid of the --test-sanity option. Since we no longer have string
based configurations, we don't have the problem with miscounting
colons any more.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Start simple, removed some unused variables and change all '<<EOF' to
'<<"EOF"'. The latter is because some code colorizers (notably, in
emacs) cannot recognise the here document end marker unless it's
quoted and therefore assume the rest of the file is part of the here
document.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Rename 'update' to 'generate'. Rather than recurse, just explicitly
call the three generate targets directly.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Calling SSL_shutdown while in init previously gave a "1" response, meaning
everything was successfully closed down (even though it wasn't). Better is
to send our close_notify, but fail when trying to receive one.
The problem with doing a shutdown while in the middle of a handshake is
that once our close_notify is sent we shouldn't really do anything else
(including process handshake/CCS messages) until we've received a
close_notify back from the peer. However the peer might send a CCS before
acting on our close_notify - so we won't be able to read it because we're
not acting on CCS messages!
Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
For BSD systems, Configure adds a shared_ldflags including a reference
to the Makefile variable LIBRPATH, but since it must be passed down to
Makefile.shared, care must be taken so the value of LIBRPATH doesn't
get expanded too early, or it ends up giving an empty string.
Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
Some users want to disable SSL 3.0/TLS 1.0/TLS 1.1, and enable just
TLS 1.2. In the future they might want to disable TLS 1.2 and
enable just TLS 1.3, ...
This commit makes it possible to disable any or all of the TLS or
DTLS protocols. It also considerably simplifies the SSL/TLS tests,
by auto-generating the min/max version tests based on the set of
supported protocols (425 explicitly written out tests got replaced
by two loops that generate all 425 tests if all protocols are
enabled, fewer otherwise).
Reviewed-by: Richard Levitte <levitte@openssl.org>
Fix a typo in the definition of the GOST2012-NULL-GOST12 ciphersuite.
RT#4213
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
It seems risky in the context of cross-signed certificates when the
same certificate might have multiple potential issuers. Also rarely
used, since chains in OpenSSL typically only employ self-signed
trust-anchors, whose self-signatures are not checked, while untrusted
certificates are generally ephemeral.
Reviewed-by: Dr. Stephen Henson <steve@openssl.org>
Cygwin was used for x86 before, so let's keep it around for those who
still use it (it make Configure reconf possible).
Cygwin-i[3456]86 for those that might generate and pass a target name
directly to Configure.
Reviewed-by: Rich Salz <rsalz@openssl.org>
This patch allows to recognize the architectures supported by Cygwin
and to choose the right configuration from there. Drop -march to
use default architecture on 32 bit x86.
Drop pre-Cygwin-1.3 recognition since it's long gone and there's no
valid configuration for this anymore.
Signed-off-by: Corinna Vinschen <vinschen@redhat.com>
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Building for the Cygwin distro requires to be able to build debuginfo
files. This in turn requires to build object files without stripping.
The stripping is performed by the next step after building which creates
the debuginfo files.
Signed-off-by: Corinna Vinschen <vinschen@redhat.com>
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Remove lint, tags, dclean, tests.
This is prep for a new makedepend scheme.
This is temporary pending unified makefile, and might help it.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Author: Remi Gacogne <rgacogne-github@coredump.fr>
GH334: Add an OCSP_SINGLERESP_get0_id() accessor to the OCSP_CERTID of
a OCSP_SINGLERESP. It is possible to do it the other way around using
OCSP_resp_find(), but this is more efficient when you have a tree indexed
by OCSP_CERTID, like haproxy does. (This is also RT4251)
Author: Marek Klein <kleinmrk@gmail.com>
GH556: OCSP_resp_get_produced_at() accessor to the producedAt of a
OCSP_BASICRESP
GH555: TS_STATUS_INFO_get_status(), TS_STATUS_INFO_get_text() and
TS_STATUS_INFO_get_failure_info() accessors for a TS_STATUS_INFO
Signed-off-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
Also report an SSL_dane_enable error when the basedomain is an
invalid SNI name. Avoid side-effects when such a name is valid
with X509_VERIFY_PARAM_set1_host(), as e.g. with an empty name, by
setting the SNI name first.
Reviewed-by: Rich Salz <rsalz@openssl.org>
- bugfix: should not treat '--' as invalid domain substring.
- '-' should not be the first letter of a domain
Signed-off-by: Viktor Dukhovni <viktor@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
The windows installation instructions were very out of date. Substantial
update to the text. Remove a lot of historical stuff that isn't relevant
any more, and merge the win64 and win32 instructions into one file.
Reviewed-by: Richard Levitte <levitte@openssl.org>
The previous 'Relax the requirements for a debug build' commit had
an extra line of code that shouldn't have been there. This fixes it.
Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
It seems that the r modifier for s/// is fairly new. It's reported
not to exist in perl 5.10.1, so it's better to avoid it when
possible.
Reviewed-by: Tim Hudson <tjh@openssl.org>
The entropy-gathering daemon is used only on a small number of machines.
Provide a configure knob so that EGD support can be disabled by default
but re-enabled on those systems that do need it.
Reviewed-by: Dr. Stephen Henson <steve@openssl.org>
We required that a target be named 'debug-something' or to have at
least one of the configuration items debug_cflags and debug_lflags for
--debug to be accepted.
However, there are targets with no such markings but that will still
have debugging capabilities. This is particularly true for mk1mf
builds, where the extra flags for debugging are figured out later on
by util/mk1mf.pl.
Reviewed-by: Rich Salz <rsalz@openssl.org>
It turns out that -pause calls the undocumented function SSL_set_debug.
That just sets flag inside the SSL structure. That flag, despite
the command is never used. So remove the flag, the field, and the
function.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Tell open() O_BINARY on VMS doesn't make sense, as it's possible to
use more precise file attributes. However, if we're still going to
fdopen() it in binary mode, we must set the fd in binary context.
Reviewed-by: Rich Salz <rsalz@openssl.org>
On some platforms, the shell will determine what attributes a file
will have, so while the program might think it's safely outputting
binary data, it's not always true.
For the sake of the tests, it's therefore safer to use -out than to
use redirection.
Reviewed-by: Rich Salz <rsalz@openssl.org>
'openssl rehash' isn't implemented on all platforms, and since 'make
test' depends on a rehash of certs/demo being performed, it becomes an
effective block from running tests on any platform but Unix, for the
moment.
It's better to fall back to c_rehash and let the tests perform
everywhere.
Reviewed-by: Matt Caswell <matt@openssl.org>
On VMS, the command MCR will assume SYS$SYSTEM: when the first
argument lacks a directory spec. So for programs in the current
directory, we add [] to tell MCR it is in the current directory.
It's the same as having ./ at the start of a program on Unix so the
shell doesn't start looking along $PATH.
Reviewed-by: Rich Salz <rsalz@openssl.org>
This used to work but somewhere along the line it broke and was failing to
detect duplicate ordinals - which was the whole point of the test!
Reviewed-by: Rich Salz <rsalz@openssl.org>
util/mk1mf.pl was relying on the platform having the 'debug-' prefix
for doing a debug build. Since the setup of targets has changed, this
is no longer true. However, it can look for '--debug' in the command
line options.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Add CRYPTO_EX_DATA add EndC_KEY_[gs]et_method, From Roumen Petrov.
Had to add various exdata calls to init/copy/free the exdata.
Had to remove const from some EC functions because exdata isn't
const-correct. :(
Also remove EC_EXTRA_DATA and use a union to hold the possible
pre-computed values and an enum to tell which value is in the
union. (Rich Salz)
Reviewed-by: Dr. Stephen Henson <steve@openssl.org>
This test relies on a private function, which isn't exported.
This test would work better as a unit test in crypto/bn/bn_prime.c.
Reviewed-by: Rich Salz <rsalz@openssl.org>
For some strange reason opensslconf.h was only defining DES_LONG
when included via des.h, but that's exceedingly fragile (as a
result of include guards the include via des.h might not actually
process the content again).
Ripped out the nesting constraint, now always define OSSL_DES_LONG
if not already defined. Note, this could just be DES_LONG, but
trying to avoid exposing DES_LONG in places where it has never been
seen before, so it is up to des.h to actually define DES_LONG as
OSSL_DES_LONG.
Reviewed-by: Rich Salz <rsalz@openssl.org>
It seems like the convention for VMS exit codes is to combine the VMS
C facility code (0x35a000) with a recoded exit code as follows:
0 => 1
1-255 => 8*code + 2
We also add 0x10000000, which is the control bit that has DCL not
report the error on the terminal. That's just as well, since it would
be quite nonsensical, for example:
%C-W-NOMSG, Message number 0035A018
We could do all this by using the normal exit() function after having
defined the macro _POSIX_EXIT. Unfortunately, this feature only
exists in VMS C V7.1 and up.
Reviewed-by: Rich Salz <rsalz@openssl.org>
VMS being a record oriented operating system, it's uncertain how the
'pipe' passes binary data from one process to another. Experience
shows that we get in trouble, and it's probably due to the pipe in
itself being opened in text mode (variable length records).
It's safer to pass data via an intermediary file instead.
Reviewed-by: Rich Salz <rsalz@openssl.org>
VMS uses a variant of openssl.cnf named openssl-vms.cnf.
There's a Perl on VMS mystery where a open pipe will not SIGPIPE when
the child process exits, which means that a loop sending "y\n" to it
will never stop. Adding a counter helps fix this (set to 10, we know
that none of the CA.pl commands will require more).
Reviewed-by: Rich Salz <rsalz@openssl.org>
Well, I'm not actually changing time_t, just changing how time_t
valued opt values are converted from string to time_t.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Create Makefile's from Makefile.in
Rename Makefile.org to Makefile.in
Rename Makefiles to Makefile.in
Address review feedback from Viktor and Richard
Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
They all stop including evp_locl.h, so we also take care of their
adaptation to opaque EVP_CIPHER_CTX, as was promised in an earlier
commit.
Reviewed-by: Rich Salz <rsalz@openssl.org>
We follow the method used for EVP_MD.
Also, move all the internal EVP_CIPHER building macros from evp_locl.h
to evp_int.h. This will benefit our builtin EVP_CIPHERs.
Reviewed-by: Rich Salz <rsalz@openssl.org>
EVP_CIPHER_CTX_flags was returning the flags of its associated
EVP_CIPHER. However, EVP_CIPHER_CTX has flags of its own, so this
function is quite confusing and therefore error prone.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Note: there's a larger number of implementations in crypto/evp/ that
aren't affected because they include evp_locl.h. They will be handled
in a separate commit.
Reviewed-by: Rich Salz <rsalz@openssl.org>
New functions:
- EVP_CIPHER_CTX_encrypting()
- EVP_CIPHER_CTX_iv()
- EVP_CIPHER_CTX_iv_noconst()
- EVP_CIPHER_CTX_original_iv()
- EVP_CIPHER_CTX_buf_noconst()
- EVP_CIPHER_CTX_num()
- EVP_CIPHER_CTX_set_num()
- EVP_CIPHER_CTX_cipher_data()
- EVP_CIPHER_CTX_new_cipher_data()
Note that the accessors / writers for iv, buf and num may go away, as
those rather belong in the implementation's own structure (cipher_data)
when the implementation would affect them (that would be the case when
they are flagged EVP_CIPH_CUSTOM_IV or EVP_CIPH_FLAG_CUSTOM_CIPHER).
Reviewed-by: Rich Salz <rsalz@openssl.org>
Following the method used for EVP_MD_CTX and HMAC_CTX,
EVP_CIPHER_CTX_init and EVP_CIPHER_CTX_cleanup are joined together
into one function, EVP_CIPHER_CTX_reset, with EVP_CIPHER_CTX_init kept
as an alias.
EVP_CIPHER_CTX_cleanup fills no purpose of its own any more and is
therefore removed.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Implement range-checking in all counts in apps. Turns out only a couple
of cases were missing. And make the range-checking code more strict.
Replace almost all opt_ulong() calls with opt_long()
Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
It was assumed that the syntax FOO/Foo=PROCEDURE would create both an
upper case and mixed case symbol in the GST. Not so, it requires
having both FOO/Foo=PROCEDURE (to create the upper case alias) and
Foo=PROCEDURE (to create the mixed case slot).
We make sure that any symbol always occupies two slots (even those
that don't exist) by filling up with SPARE when necessary. That will
assure that any changes will still have the same symbols in the same
slots no matter what (save a complete rewrite of the ordinals files).
Reviewed-by: Rich Salz <rsalz@openssl.org>
It was assumed that a dummy with the type PRIVATE_PROCEDURE would
simply occupy a slot but otherwise ignore the symbol. Not so, but
there is SPARE for that purpose.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Make LHASH_OF use static inline functions.
Add new lh_get_down_load and lh_set_down_load functions and their
typesafe inline equivalents.
Make lh_error a function instead of a macro.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Since danetest is to test DANE rather than specific algorithms, it's
acceptable to require EC when testing it.
Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
These now take and return unsigned long, and get is constified.
Updated related documentation and util/ssleay.num
Reviewed-by: Matt Caswell <matt@openssl.org>
We use $default_depflags to check if a 'make depend' is needed after
configuring, so it needs to be kept up to date.
Reviewed-by: Matt Caswell <matt@openssl.org>
Commit 189ae368d9 (RT ticket 3352) provided the capability to output
session key data in NSS format. The big apps cleanup broke that capability.
This commit restores it.
RT#4201
Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
Make CRYPTO_mem_leaks() and CRYPTO_mem_leaks_fp() return a status value.
Update documentation. Don't abort() if there are leaks.
Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
In order for mkdep to find #ifdef'd functions, they must be
wrapped (in the header file) with
#ifndef OPENSSL_NO_...
So do that for various CRYPTO_mem_debug... things.
Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
Provide backwards-compatiblity for functions, macros and include
files if OPENSSL_API_COMPAT is either not defined or defined less
than the version number of the release in which the feature was
deprecated.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Only two macros CRYPTO_MDEBUG and CRYPTO_MDEBUG_ABORT to control this.
If CRYPTO_MDEBUG is not set, #ifdef out the whole debug machinery.
(Thanks to Jakob Bohm for the suggestion!)
Make the "change wrapper functions" be the only paradigm.
Wrote documentation!
Format the 'set func' functions so their paramlists are legible.
Format some multi-line comments.
Remove ability to get/set the "memory debug" functions at runtme.
Remove MemCheck_* and CRYPTO_malloc_debug_init macros.
Add CRYPTO_mem_debug(int flag) function.
Add test/memleaktest.
Rename CRYPTO_malloc_init to OPENSSL_malloc_init; remove needless calls.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Applications wishing to include their own stacks now just need to include
DEFINE_STACK_OF(foo)
in a header file.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Change DECLARE_STACK_OF into inline functions. This avoids the need for
auto generated mkstack.pl macros and now handles const properly.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Also tweak some of the code in demos/bio, to enable interactive
testing of BIO_s_accept's use of SSL_dup. Changed the sconnect
client to authenticate the server, which now exercises the new
SSL_set1_host() function.
Reviewed-by: Richard Levitte <levitte@openssl.org>
If there's a failure allocating md_data, the destination pctx will have
a shared pointer with the source EVP_MD_CTX, which will lead to problems
when either the source or the destination is freed.
Reviewed-by: Stephen Henson <steve@openssl.org>
The protocol selection code is now consolidated in a few consecutive
short functions in a single file and is table driven. Protocol-specific
constraints that influence negotiation are moved into the flags
field of the method structure. The same protocol version constraints
are now applied in all code paths. It is now much easier to add
new protocol versions without reworking the protocol selection
logic.
In the presence of "holes" in the list of enabled client protocols
we no longer select client protocols below the hole based on a
subset of the constraints and then fail shortly after when it is
found that these don't meet the remaining constraints (suiteb, FIPS,
security level, ...). Ideally, with the new min/max controls users
will be less likely to create "holes" in the first place.
Reviewed-by: Kurt Roeckx <kurt@openssl.org>
SIZE_MAX is a great macro, and does unfortunately not exist everywhere.
Since we check against half of it, using bitwise shift to calculate the
value of half SIZE_MAX should be safe enough.
Reviewed-by: Tim Hudson <tjh@openssl.org>
If DSA parameters are absent return -1 (for unknown) in DSA_security_bits.
If parameters are absent when a certificate is set in an SSL/SSL_CTX
structure this will reject the certificate by default. This will cause DSA
certificates which omit parameters to be rejected but that is never (?)
done in practice.
Thanks to Brian 'geeknik' Carpenter for reporting this issue.
Reviewed-by: Emilia Käsper <emilia@openssl.org>
Previous versions of OpenSSL had the max size limit for a CertificateRequest
message as |s->max_cert_list|. Previously master had it to be
SSL3_RT_MAX_PLAIN_LENGTH. However these messages can get quite long if a
server is configured with a long list of acceptable CA names. Therefore
the size limit has been increased to be consistent with previous versions.
RT#4198
Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
Move all calls of the OCSP callback into one place, rather than repeating it
in two different places.
Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
It makes no sense to call the OCSP status callback if we are resuming a
session because no certificates will be sent.
Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
If a server sends the status_request extension then it may choose
to send the CertificateStatus message. However this is optional.
We were treating it as mandatory and the connection was failing.
Thanks to BoringSSL for reporting this issue.
RT#4120
Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
If the client sends a status_request extension in the ClientHello
and the server responds with a status_request extension in the
ServerHello then normally the server will also later send a
CertificateStatus message. However this message is *optional* even
if the extensions were sent. This adds a test to ensure that if
the extensions are sent then we can still omit the message.
Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
When it's the last item that is removed int_thread_hash == hash and we would
still call int_thread_release(&hash) while hash is already freed. So
int_thread_release would compare that dangling pointer to NULL which is
undefined behaviour. Instead do already what int_thread_release() would do,
and make the call do nothing instead.
Reviewed-by: Rich Salz <rsalz@openssl.org>
RT: #4155, MR: #1519
When EC is disabled, and an error occurs in ssl_generate_master_secret()
or RAND_bytes(), the error path does not free rsa_decrypt.
RT#4197
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
DTLS cookie generation and verification were exact copies of each
other save the last few lines. This refactors them to avoid code
copying.
Reviewed-by: Matt Caswell <matt@openssl.org>
After the recent change to use ossl_inline, builds were failing on some
platforms due to a missing usage of "inline".
Reviewed-by: Richard Levitte <levitte@openssl.org>
Add macro ossl_inline for use in public headers where a portable inline
is required. Change existing inline to use ossl_inline
Reviewed-by: Kurt Roeckx <kurt@openssl.org>
This adds support for SSL/TLS configuration using configuration modules.
Sets of command value pairs are store and can be replayed through an
SSL_CTX or SSL structure using SSL_CTX_config or SSL_config.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Rename to OPENSSL_mem_debug_{push,pop}.
Remove simple calls; keep only calls used in recursive functions.
Ensure we always push, to simplify so that we can always pop
Reviewed-by: Richard Levitte <levitte@openssl.org>
Just like *_clear_free routines. Previously undocumented, used
a half-dozen times within OpenSSL source.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Some URLs in the source code ended up getting mangled by indent. This fixes
it. Based on a patch supplied by Arnaud Lacombe <al@aerilon.ca>
Reviewed-by: Richard Levitte <levitte@openssl.org>
SSL_CIPHER_description() was returning "unknown" for the encryption
in the new ChaCha20/Poly1305 TLS ciphersuites.
RT#4183
Reviewed-by: Richard Levitte <levitte@openssl.org>
Rename BUF_{strdup,strlcat,strlcpy,memdup,strndup,strnlen}
to OPENSSL_{strdup,strlcat,strlcpy,memdup,strndup,strnlen}
Add #define's for the old names.
Add CRYPTO_{memdup,strndup}, called by OPENSSL_{memdup,strndup} macros.
Reviewed-by: Tim Hudson <tjh@openssl.org>
New functions EC_POINT_point2buf and EC_KEY_key2buf which encode
a point and allocate a buffer in one call.
New function EC_KEY_oct2key() which sets public key in an EC_KEY
structure from an encoded point.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Solaris builds were failing during async compilation because the .o files
created from compiling the corresponding .c files held in async/arch were
ending up in the top level async directory. Consequently the link fails
because it can't find the .o files.
Thanks to Richard Levitte for pointing me in the right direction on this.
Reviewed-by: Richard Levitte <levitte@openssl.org>
The previous commit introduced a new file format for ssleay.num and
libeay.num, i.e. the introduction of a version field. Therefore the update
capability in mkdef.pl needs updating to take account of the new format.
Reviewed-by: Richard Levitte <levitte@openssl.org>
On Linux when creating the .so file we were exporting all symbols. We should
only be exporting public symbols. This commit fixes the issue. It is only
applicable to linux currently although the same technique may work for other
platforms (e.g. Solaris should work the same way).
This also adds symbol version information to our exported symbols.
Reviewed-by: Richard Levitte <levitte@openssl.org>
s_server was trying to set the ECDH curve when no-ec was defined. This also
highlighted the fact that the -no_ecdhe option to s_server is broken, and
doesn't make any sense any more (ECDHE is on by default and the only way it
can be disabled is through the cipherstring). Therefore this commit removes
the option.
Reviewed-by: Kurt Roeckx <kurt@openssl.org>
Make EVP_PKEY_copy_parameters() work if the destination has no type
(e.g. if obtained from EVP_PKEY_new()) or the underlying key is NULL.
This is useful where we want to copy the parameters from an existing
key to a new key.
Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
Commit 2b0180c37f attempted to do this but
only hit one of many BN_mod_exp codepaths. Fix remaining variants and add
a test for each method.
Thanks to Hanno Boeck for reporting this issue.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Dr. Stephen Henson <steve@openssl.org>
When processing a public key input via "-pubin", "private" was
sometimes erroneously set, or else not set and incorrectly asserted.
Reviewed-by: Rich salz <rsalz@openssl.org>
GCM and CCM are modes of operation for block ciphers only. ChaCha20-Poly1305
operates in neither of them but it is AEAD. This change also enables future
AEAD ciphers to be available for use with DTLS.
Signed-off-by: Rich Salz <rsalz@akamai.com>
Reviewed-by: Matt Caswell <matt@openssl.org>
This reverts commit 777f482d99.
Author credit missing. Reverting this and re-committing with
an Author line.
Reviewed-by: Matt Caswell <matt@openssl.org>
GCM and CCM are modes of operation for block ciphers only. ChaCha20-Poly1305
operates in neither of them but it is AEAD. This change also enables future
AEAD ciphers to be available for use with DTLS.
Signed-off-by: Rich Salz <rsalz@akamai.com>
Reviewed-by: Matt Caswell <matt@openssl.org>
A BIO_flush call in the DTLS code was not correctly setting the |rwstate|
variable to SSL_WRITING. This means that SSL_get_error() will not return
SSL_ERROR_WANT_WRITE in the event of an IO retry.
Reviewed-by: Richard Levitte <levitte@openssl.org>
If using DTLS and NBIO then if a second or subsequent handshake message
fragment hits a retry, then the retry attempt uses the wrong fragment
offset value. This commit restores the fragment offset from the last
attempt.
Reviewed-by: Richard Levitte <levitte@openssl.org>
If the call to OBJ_find_sigid_by_algs fails to find the relevant NID then
we should set the NID to NID_undef.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Most of all, that has inclusion of openssl/engine.h work even if EC
has been disabled. This is the same as has been done for DH, DSA, RSA
and more...
Reviewed-by: Stephen Henson <steve@openssl.org>
Rename ENGINE _EC_KEY functions to _EC.
Add support for EC_KEY_METHOD in ENGINE_set_default et al. Copy
ec_meth.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Add set_group, set_public and set_private methods. An EC_KEY_METHOD can use
these to perform any appropriate operation when the key components are set,
such as caching data in some more convenient ENGINE specific format or
returning an error if the parameters are invalid or the operation is
not supported.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Rename ecdh_compute_key into ossl_ecdh_compute_key and modify it
to use EC error codes. Remove superfluous old ECDH functions.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Add keygen to EC_KEY_METHOD. Redirect EC_KEY_generate_key through
method and set the current EC key generation function as the default.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Add EC_KEY_METHOD. This is part of the EC revision and will make EC behave
more like other algorithms. Specifically:
EC_KEY_METHOD is part of EC_KEY.
It is part of ENGINE.
Default or key specific implementations can be provided to redirect some
or all operations.
Reviewed-by: Richard Levitte <levitte@openssl.org>
As part of this, move release creation to a script to be called from
.travis.yml. That makes it much easier to test outside of travis.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Add new flag TLS1_FLAGS_RECEIVED_EXTMS which is set when the peer sends
the extended master secret extension.
Server now sends extms if and only if the client sent extms.
Check consistency of extms extension when resuming sessions following (where
practical) RFC7627.
Reviewed-by: Matt Caswell <matt@openssl.org>
Commit 6140f0365 added some new ctrl constants. However due to a
merge error one of these values was duplicated with an existing
value.
Reviewed-by: Rich Salz <rsalz@openssl.org>
It seems like some tar versions don't like the name:id form for
--owner and --group. The closest known anonymous user being 0 (root),
that seems to be the most appropriate user/group to assign ownership
to. It matters very little when unpacking either way.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Looking over names, it seems like we usually use names ending with
_new and _free as object constructors and destructors. Also, since
EVP_MD_CTX_init is now used to reset a EVP_MD_CTX, it might as well be
named accordingly.
Reviewed-by: Rich Salz <rsalz@openssl.org>
The idea is that with EVP_MD_CTX_create() and EVP_MD_CTX_destroy(),
EVP_MD_CTX_cleanup and EVP_MD_CTX_init is not used the same as before.
Instead, we need a single function that can be used to reinitialise an
existing EVP_MD_CTX that's been created with EVP_MD_CTX_create()
previously. Combining EVP_MD_CTX_cleanup and EVP_MD_CTX_init into
that one function is the answer.
Reviewed-by: Rich Salz <rsalz@openssl.org>
This moves the definition to crypto/hmac/hmac_lcl.h. Constructor and
destructor added, and the typedef moved to include/openssl/ossl_typ.h.
Reviewed-by: Rich Salz <rsalz@openssl.org>
This moves the definition to crypto/include/internal/evp_int.h and
defines all the necessary method creators, destructors, writers and
accessors. The name standard for the latter is inspired from the
corresponding functions to manipulate UI methods.
Reviewed-by: Rich Salz <rsalz@openssl.org>
This change required some special treatment, as HMAC is intertwined
with EVP_MD. For now, all local HMAC_CTX variables MUST be
initialised with HMAC_CTX_EMPTY, or whatever happens to be on the
stack will be mistaken for actual pointers to EVP_MD_CTX. This will
change as soon as HMAC_CTX becomes opaque.
Also, since HMAC_CTX_init() can fail now, its return type changes from
void to int, and it will return 0 on failure, 1 on success.
Reviewed-by: Rich Salz <rsalz@openssl.org>
This moves the definitionto crypto/evp/evp_locl.h, along with a few
associated accessor macros. A few accessor/writer functions added.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Make TARFILE include ../ instead of having that hard coded all over the place.
When transforming file names in TAR_COMMAND, use $(NAME) instead of openssl-$(VERSION)
Reviewed-by: Rich Salz <rsalz@openssl.org>
SSL_{CTX}_set_tmp_ecdh() allows to set 1 EC curve and then tries to use it. On
the other hand SSL_{CTX_}set1_curves() allows you to set a list of curves, but
only when SSL_{CTX_}set_ecdh_auto() was called to turn it on.
Reviewed-by: Dr. Stephen Henson <steve@openssl.org>
This only gets used to set a specific curve without actually checking that the
peer supports it or not and can therefor result in handshake failures that can
be avoided by selecting a different cipher.
Reviewed-by: Dr. Stephen Henson <steve@openssl.org>
The new state machine code missed an allowed transition when resuming a
session via EAP FAST. This commits adds the missing check for the
transition.
Reviewed-by: Andy Polyakov <appro@openssl.org>
Running 'make TEST=test_ordinals test' starts the whole build process,
which wasn't desired for this target. Instead, we take a shortcut.
Reviewed-by: Rich Salz <rsalz@openssl.org>
'./Configure reconf' hasn't been working for a while, because a perl
lable needs to be immediately followed by a block.
Reviewed-by: Andy Polyakov <appro@openssl.org>
Remove RSA_FLAG_SIGN_VER: this was origininally used to retain binary
compatibility after RSA_METHOD was extended to include rsa_sign and
rsa_verify fields. It is no longer needed.
Reviewed-by: Richard Levitte <levitte@openssl.org>
The contents of this variable ($memleak_devteam_backtrace) is added to
$cflags unless we build for a platform we know doesn't support gcc's
-rdynamic och backtrace() and friends.
Reviewed-by: Andy Polyakov <appro@openssl.org>
Remove sign/verify and required_pkey_type fields of EVP_MD: these are a
legacy from when digests were linked to public key types. All signing is
now handled by the corresponding EVP_PKEY_METHOD.
Only allow supported digest types in RSA EVP_PKEY_METHOD: other algorithms
already block unsupported types.
Remove now obsolete EVP_dss1() and EVP_ecdsa().
Reviewed-by: Richard Levitte <levitte@openssl.org>
The feature_test_macros(7) manual tells us that _BSD_SOURCE is
deprecated since glibc 2.20 and that the compiler will warn about it
being used, unless _DEFAULT_SOURCE is defined as well.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Add CRYPTO_free_ex_index (for shared libraries)
Unify and complete the documentation for all "ex_data" API's and objects.
Replace xxx_get_ex_new_index functions with a macro.
Added an exdata test.
Renamed the ex_data internal datatypes.
Reviewed-by: Matt Caswell <matt@openssl.org>
Don't hard code EVP_sha* etc for signature algorithms: use table
indices instead. Add SHA224 and SHA512 to tables.
Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
Change handshake hash array into a single digest context simplifying the
handhake hash code. Use EVP_md5_sha1() if needed for handshake hashes in
TLS 1.1 and earlier.
Simplify PRF code to also use a single digest and treat EVP_md5_sha1()
as a special case.
Modify algorithm2 field of ciphers to use a single index value for handshake
hash and PRF instead of a bitmap.
Reviewed-by: Matt Caswell <matt@openssl.org>
The SRP_create_verifier_BN function goes to the |err| label if the |salt|
value passed to it is NULL. It is then deref'd.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Following on from the previous commit this adds some documentation for the
BN_with_flags function which is easy to misuse.
Reviewed-by: Emilia Käsper <emilia@openssl.org>
The function rsa_ossl_mod_exp uses the function BN_with_flags to create a
temporary copy (local_r1) of a BIGNUM (r1) with modified flags. This
temporary copy shares some state with the original r1. If the state of r1
gets updated then local_r1's state will be stale. This was occurring in the
function so that when local_r1 was freed a call to bn_check_top was made
which failed an assert due to the stale state. To resolve this we must free
local_r1 immediately after we have finished using it and not wait until the
end of the function.
This problem prompted a review of all BN_with_flag usage within the
codebase. All other usage appears to be correct, although often not
obviously so. This commit refactors things to make it much clearer for
these other uses.
Reviewed-by: Emilia Käsper <emilia@openssl.org>
If somewhere in SSL_new() there is a memory allocation failure, ssl3_free() can
get called with s->s3 still being NULL.
Patch also provided by Willy Tarreau <wtarreau@haproxy.com>
Signed-off-by: Kurt Roeckx <kurt@roeckx.be>
Reviewed-by: Viktor Dukhovni <openssl-users@dukhovni.org>
Add a ctrl to EVP_md5_sha1() to handle the additional operations needed
to handle SSL v3 client authentication and finished message.
Reviewed-by: Tim Hudson <tjh@openssl.org>
This patch contains the necessary changes to provide GOST 2012
ciphersuites in TLS. It requires the use of an external GOST 2012 engine.
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
During rebasing of the async changes some error codes ended up being
duplicated so that "make errors" fails. This removes the duplication.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Stephen Henson <steve@openssl.org>
In the async code for MacOS/X define _XOPEN_SOURCE (if not already
defined) as early as possible. We must do this before including
any header files, because on MacOS/X <stlib.h> includes <signal.h>
which includes <ucontext.h>. If we delay defining _XOPEN_SOURCE
and include <ucontext.h> after various system headers are included,
we are very likely to end up with the wrong (truncated) definition
of ucontext_t.
Also, better error handling and some code cleanup in POSIX fibre
construction and destruction. We make sure that async_fibre_makecontext()
always initializes the fibre to a state that can be freed.
For all implementations, check for error returns from
async_fibre_makecontext().
Reviewed-by: Matt Caswell <matt@openssl.org>
Though the callers check the function return value and ignore the
size_t output argument on failure, it is still often not ideal to
store (-1) in size_t on error. That might signal an unduly large
buffer. Instead set the size_t to 0, to indicate no space.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Implements Thread Local Storage in the windows async port. This also has
some knock on effects to the posix and null implementations.
Reviewed-by: Rich Salz <rsalz@openssl.org>
In theory the pthreads approach for Thread Local Storage should be more
portable.
This also changes some APIs in order to accommodate this change. In
particular ASYNC_init_pool is renamed ASYNC_init_thread and
ASYNC_free_pool is renamed ASYNC_cleanup_thread. Also introduced ASYNC_init
and ASYNC_cleanup.
Reviewed-by: Rich Salz <rsalz@openssl.org>
A lot of the pool handling code was in the arch specific files, but was
actually boiler plate and the same across the implementations. This commit
moves as much code as possible out of the arch specific files.
Reviewed-by: Rich Salz <rsalz@openssl.org>
We were using _pipe to create a pipe on windows. This uses the "int" type
for its file descriptor for compatibility. However most windows functions
expect to use a "HANDLE". Probably we could get away with just casting but
it seems more robust to use the proper type and main stream windows
functions.
Reviewed-by: Rich Salz <rsalz@openssl.org>
The rand code can aquire locks and then attempt crypto operations. This
can end up in a deadlock if we are using an async engine, because control
returns back to the user code whilst still holding the lock. We need to
force synchronous operation for these sections of code.
Reviewed-by: Rich Salz <rsalz@openssl.org>
There are potential deadlock situations that can occur if code executing
within the context of a job aquires a lock, and then pauses the job. This
adds an ability to temporarily block pauses from occuring whilst performing
work and holding a lock.
Reviewed-by: Rich Salz <rsalz@openssl.org>
During development some functions got added and then later taken away.
Since these will never appear in a production version there is no reason
for them to appear in libeay.num flagged as "NOEXIST".
Reviewed-by: Rich Salz <rsalz@openssl.org>
Even with _XOPEN_SOURCE defined OS-X still displays warnings that
makecontext and friends are deprecated. This isn't a problem until you
try and build with --strict-warnings, and the build fails. This change
suppresses the warnings. We know they are deprecated but there is no
alternative!
Reviewed-by: Rich Salz <rsalz@openssl.org>
async_fibre_makecontext was initialise the fibre first and then calling
getcontext(). It should be the other way around because the getcontext
call may overwrite some of the things we just initialised. This didn't
cause an issue on Linux and so the problem went unnoticed. On OS-X it
causes a crash.
Reviewed-by: Rich Salz <rsalz@openssl.org>
For some reason the dasync sha1 functions did not start with the
dasync prefix like all of the other functions do. Changed for
consistency.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Clarify that you must only call this after all async jobs have
completed - otherwise you could get memory leaks.
Reviewed-by: Rich Salz <rsalz@openssl.org>
_longjmp/_setjmp do not manipulate the signal mask whilst
longjmp/setjmp may do. Online sources suggest this could result
in a significant speed up in the context switching.
Reviewed-by: Rich Salz <rsalz@openssl.org>
If config'd without -d (--debug), asynctest was crashing with:
*** longjmp causes uninitialized stack frame ***
This is because gcc will add certain checks for some functions
(including longjmp). The checks assume you can only longjmp down the
stack not up. However, if we are actually jumping to a different
fibre then it can appear as if we are going up the stack when we are
not really. This change disables the check.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Add some clarifications to the async documentation. Also changed
ASYNC_pause_job() so that it returns success if you are not within the
context of a job. This is so that engines can be used either asynchronously
or synchronously and can treat an error from ASYNC_pause_job() as a real
error.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Don't recreate a new ASYNC_CTX every time we call ASYNC_start_job() - the
same one can be used for the life of the thread. Instead we only free it
up when we call ASYNC_free_pool().
Reviewed-by: Rich Salz <rsalz@openssl.org>
The ASYNC null implementation has not kept pace with the rest of the async
development and so was failing to compile.
Reviewed-by: Rich Salz <rsalz@openssl.org>
If an async event occurs during a renegotiation in SSL_read then s_server
was looping around, detecting we were in init and calling
init_ssl_connection instead of re-calling SSL_read.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Initial API implemented for notifying applications that an ASYNC_JOB
has completed. Currently only s_server is using this. The Dummy Async
engine "cheats" in that it notifies that it has completed *before* it
pauses the job. A normal async engine would not do that.
Only the posix version of this has been implemented so far, so it will
probably fail to compile on Windows at the moment.
Reviewed-by: Rich Salz <rsalz@openssl.org>
It is expensive to create the ASYNC_JOB objects due to the "makecontext"
call. This change adds support for pools of ASYNC_JOB objects so that we
don't have to create a new ASYNC_JOB every time we want to use one.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Where we can we should use longjmp and setjmp in preference to swapcontext/
setcontext as they seem to be more performant.
Reviewed-by: Rich Salz <rsalz@openssl.org>
The s_server option -WWW was not async aware, and therefore was not
handling SSL_ERROR_WANT_ASYNC conditions. This commit fixes that.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Removed the function ASYNC_job_is_waiting() as it was redundant. The only
time user code has a handle on a job is when one is waiting, so all they
need to do is check whether the job is NULL. Also did some cleanups to
make sure the job really is NULL after it has been freed!
Reviewed-by: Rich Salz <rsalz@openssl.org>
Create a "null" async implementation for platforms that lack support. This
just does nothing when called and therefore performs synchronously.
Reviewed-by: Rich Salz <rsalz@openssl.org>
A new -async option is added which activates SSL_MODE_ASYNC. Also
SSL_WANT_ASYNC errors are handled appropriately.
Reviewed-by: Rich Salz <rsalz@openssl.org>
The following entry points have been made async aware:
SSL_accept
SSL_read
SSL_write
Also added is a new mode - SSL_MODE_ASYNC. Calling the above functions with
the async mode enabled will initiate a new async job. If an async pause is
encountered whilst executing the job (such as for example if using SHA1/RSA
with the Dummy Async engine), then the above functions return with
SSL_WANT_ASYNC. Calling the functions again (with exactly the same args
as per non-blocking IO), will resume the job where it left off.
Reviewed-by: Rich Salz <rsalz@openssl.org>
This engine is for developers of async aware applications. It simulates
asynchronous activity with external hardware. This initial version supports
SHA1 and RSA. Certain operations using those algorithms have async job
"pauses" in them - using the new libcrypto async capability.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Provides support for running asynchronous jobs. Currently this is completely
stand alone. Future commits will integrate this into libssl and s_server/
s_client. An asynchronous capable engine will be required to see any benefit
from this capability.
Reviewed-by: Rich Salz <rsalz@openssl.org>
The forthcoming async code needs to use pthread thread local variables. This
updates the various Configurations to add the necessary flags. In many cases
this is an educated guess as I don't have access to most of these
environments! There is likely to be some tweaking needed.
Reviewed-by: Kurt Roeckx <kurt@openssl.org>
There are lots of calls to EVP functions from within libssl There were
various places where we should probably check the return value but don't.
This adds these checks.
Reviewed-by: Richard Levitte <levitte@openssl.org>
We use the sysconf function to provide details about the page size in the
secure memory code. This function can return -1 on error so we should check
for this before proceeding.
Reviewed-by: Kurt Roeckx <kurt@openssl.org>
A call to X509_verify_cert() is used to build a chain of certs for the
server to send back to the client. It isn't *actually* used for verifying
the cert at all - just building the chain. Therefore the return value is
ignored.
Reviewed-by: Kurt Roeckx <kurt@openssl.org>
The |passwd| variable in the code can be NULL if it goes to the err label.
Therefore we cannot call strlen on it without first checking that it is non
NULL.
Reviewed-by: Kurt Roeckx <kurt@openssl.org>
The problem remained unnoticed so far, because it's never called by default.
You have to craft OPENSSL_ppccap environment variable to trigger the problem.
Reviewed-by: Richard Levitte <levitte@openssl.org>
It was also found that stich performs suboptimally on AMD Jaguar, hence
execution is limited to XOP-capable and Intel processors.
Reviewed-by: Kurt Roeckx <kurt@openssl.org>
Print certificate details using accessor functions.
Since X509_CERT_AUX_print is only used in one place and can't
be used by applications (it uses an internal X509_CERT_AUX structure)
this has been removed and replaced by a function X509_aux_print which
takes an X509 pointer instead.
Reviewed-by: Tim Hudson <tjh@openssl.org>
This adds a TLSv1.0 cipher alias for ciphersuites requiring
at least TLSv1.0: currently only PSK ciphersuites using SHA256
or SHA384 MAC (SSLv3 only supports SHA1 and MD5 MAC).
Reviewed-by: Matt Caswell <matt@openssl.org>
This disables some ciphersuites which aren't supported in SSL v3:
specifically PSK ciphersuites which use SHA256 or SHA384 for the MAC.
Thanks to the Open Crypto Audit Project for identifying this issue.
Reviewed-by: Matt Caswell <matt@openssl.org>
The new function SSL_use_certificate_chain_file was always crashing in
the internal function use_certificate_chain_file because it would pass a
NULL value for SSL_CTX *, but use_certificate_chain_file would
unconditionally try to dereference it.
Reviewed-by: Stephen Henson <steve@openssl.org>
The function tls1_get_curvelist() has an explicit check to see if s->cert
is NULL or not. However the check appears *after* calling the tls1_suiteb
macro which derefs s->cert. In reality s->cert can never be NULL because
it is created in SSL_new(). If the malloc fails then the SSL_new call fails
and no SSL object is created.
Reviewed-by: Tim Hudson <tjh@openssl.org>
if we have a malloc |x = OPENSSL_malloc(...)| sometimes we check |x|
for NULL and sometimes we treat it as a boolean |if(!x) ...|. Standardise
the approach in libssl.
Reviewed-by: Kurt Roeckx <kurt@openssl.org>
The SSL object was being deref'd and then there was a later redundant check
to see if it is NULL. We assume all SSL_foo functions pass a non NULL SSL
object and do not check it.
Reviewed-by: Tim Hudson <tjh@openssl.org>
./Configure [target] --strict-warnings -Wno-pedantic-ms-format
would not add '-pedantic' because it matches '-Wno-pedantic-ms-format',
which was added first.
Reviewed-by: Matt Caswell <matt@openssl.org>
We were setting |s->renegotiate| and |s->new_session| to 0 twice in
tls_finish_handshake. This is redundant so now we just do it once!
Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
We finish the handshake when we move into the TLS_ST_OK state. At various
points we were also unnecessarily finishing it when we were reading/writing
the Finished message. It's much simpler just to do it in TLS_ST_OK, so
remove the other calls.
Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
Rebuild error source files: the new mkerr.pl functionality will now
pick up and translate static function names properly.
Reviewed-by: Richard Levitte <levitte@openssl.org>
In mkerr.pl read parse functions names in C source files and use
them for translation and sanity checks.
Reviewed-by: Richard Levitte <levitte@openssl.org>
EVP_SignInit_ex was missing from the NAME section of its man page so
typing "man EVP_SignInit_ex" failed to load the page.
Reviewed-by: Stephen Henson <steve@openssl.org>
The actual implementation has the state of the connection being
controlled with the peer parameter, non-NULL meaning connected and
NULL meaning connected.
Reviewed-by: Andy Polyakov <appro@openssl.org>
BIO_int_ctrl isn't made for the purpose BIO_get_conn_int_port used it
for.
This also changes BIO_C_GET_CONNECT to actually return the port
instead of assigning it to a pointer that was never returned back to
the caller.
Reviewed-by: Andy Polyakov <appro@openssl.org>
A buggy application that call SSL_write with a different length after a
NBIO event could cause an OPENSSL_assert to be reached. The assert is not
actually necessary because there was an explicit check a little further
down that would catch this scenario. Therefore remove the assert an move
the check a little higher up.
Reviewed-by: Rich Salz <rsalz@openssl.org>
This OPENSSL_assert in (d)tls1_hearbeat is trivially always going to be
true because it is testing the sum of values that have been set as
constants just a few lines above and nothing has changed them. Therefore
remove this.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Close GH Issue 69
Close GH PR 457
Some other updates
By Rich Salz, Alessandro Ghedini, Steve Marquess, Collin Anderson
Reviewed-by: Kurt Roeckx <kurt@openssl.org>
There were a few remaining references to SSLv2 support which are no longer
relevant now that it has been removed.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
There was a discrepancy between what ciphersuites we allowed to send a
CertificateRequest, and what ciphersuites we allowed to receive one. So
add PSK and SRP to the disallowed ones.
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Some functions were marked as inline in statem_srvr.c where they probably
didn't need to be, so remove it.
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
|tls_process_finished| was checking that |peer_finish_md_len| was
non-negative. However neither |tls1_final_finish_mac| or
|ssl3_final_finish_mac| can ever return a negative value, so the check is
superfluous.
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Due the rest of the state machine changes it makes sense to change the
SSL_state_string return strings from 3* to T*. They are not SSL3 specific
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
There was a few uses of snprintf in the DTLS SCTP code which made more
sense to be a memcpy.
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Add the ossl_statem prefix to various funtions to avoid name clashes.
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Various enums were introduced as part of the state machine rewrite. As a
matter of style it is preferred for these to be typedefs.
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
The function dtls1_link_min_mtu() was only used within d1_lib.c so make
it static.
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Clang with --strict-warnings was complaining about an uninitalised
variable. In reality it will never be used uninitialised but clang can't
figure out the logic, so just init it anyway to silence the warning.
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Rebasing the state machine code introduced a problem with empty
NewSessionTicket processing. The return value from the
tls_process_new_session_ticket() is supposed to be an enum, but a bare
integer was being used. Unfortunately this is valid C so the compiler
doesn't pick it up.
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Fix another instance of |al| being unitialised in certain error scenarios.
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
A number of error codes were wrong due to a rebase of the state machine
code.
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
The SSL variable |in_handshake| seems misplaced. It would be better to have
it in the STATEM structure.
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
tls_process_client_hello() failed to initialise the |al| variable in some
(error) scenarios. This could cause issues with creating the alert.
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Adding the new state machine broke the DTLSv1_listen code because
calling SSL_in_before() was erroneously returning true after DTLSv1_listen
had successfully completed. This change ensures that SSL_in_before returns
false.
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Remove repeated blocks of checking SSL and then SSL_CTX for the
info_callback.
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Remove all the defines for the old state machines states. Mapping old to new
is probably going to cause more problems than it solves so it is probably
better to just remove them.
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
SSL_state has been replaced by SSL_get_state and SSL_set_state is no longer
supported.
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
The |no_cert_verify| should be in the state machine structure not in SSL
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Change various state machine functions to use the prefix ossl_statem
instead.
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
The macros SSL_in_connect_init() and SSL_in_accept_init() inadvertently
depended on SSL structure internals. This fixes it to use public API calls
instead.
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Rename the enum HANDSHAKE_STATE to OSSL_HANDSHAKE_STATE to ensure there are
no namespace clashes, and convert it into a typedef.
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Fixed some issues in the logic for determining whether an SKE should be
expected or not. In particular only allow an SKE for RSA if its export and
the key size is not allowed. Also fix the ephemeral ciphersuite checks and
add in a missing call to ssl3_check_cert_and_algorithm().
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Update the return type for SSL_state in the documentation.
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
s_server was (ab)using SSL_set_state to force a renegotiation. This is a
bad way to do things and does not work with the new state machine code, so
we need to do it a different way.
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Fix an out of date reference to old state machine code in a comment
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
The next_state variable is no longer needed in the new state machine.
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Add some documentation on the thinking behind the state machine.
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Move some function definitions around within the state machine to make sure
they are in the correct files. Also create a statem_locl.h header for stuff
entirely local to the state machine code and move various definitions into
it.
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Pull out the state machine into a separate sub directory. Also moved some
functions which were nothing to do with the state machine but were in state
machine files. Pulled all the SSL_METHOD definitions into one place...most
of those files had very little left in them any more.
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
ssl_get_message is no longer used so it should be removed from
ssl_method_st
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Previously each message specific process function would create its own
PACKET structure. Rather than duplicate all of this code lots of times we
should create it in the state machine itself.
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
The SSL structure contained a "state" variable that kept track of the state
machine in the old code. The new state machine does not use this so it can
be removed.
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
The SSL structure contained a "type" variable that was set to either
SSL_ST_ACCEPT or SSL_ST_CONNECT depending on whether we are the server or
the client. This duplicates the capability of the "server" variable and was
actually rarely used.
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
The DTLSv1_listen code set the state value explicitly to move into init.
Change to use state_set_in_init() instead.
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
ssl.h and ssl3.h have a number of defines for the various states in the old
state machine code. Since this is public API it is not desirable to just
remove them. Instead redefine them to the closest equivalent state in the
new state machine code. If an application calls SSL_state then the return
value can still be compared against these old values if necessary. However
not all values have an equivalent state in the new code, so these are just
redefined to a dummy value.
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Clean up and remove lots of code that is now no longer needed due to the
move to the new state machine.
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Implement all of the necessary changes to make DTLS on the server work
with the new state machine code.
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Implement all of the necessary changes for moving TLS server side
processing into the new state machine code.
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Split the TLS server ssl3_get_* and ssl3_send_* functions into two ready
for the migration to the new state machine code.
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Remove all the functions and dead code that is now no longer required as
a result of the DTLS client move into the new state machine code.
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Move all DTLS client side processing into the new state machine code. A
subsequent commit will clean up the old dead code.
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Create a dtls_get_message function similar to the old dtls1_get_message but
in the format required for the new state machine code. The old function will
eventually be deleted in later commits.
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Remove redundant code following moving client side TLS handling to the new
state machine implementation.
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
This swaps the implementation of the client TLS state machine to use the
new state machine code instead.
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
The new state machine code will split up the reading and writing of
hanshake messages into discrete phases. In order to facilitate that the
existing "get" type functions will be split into two halves: one to get
the message and one to process it. The "send" type functions will also have
all work relating to constructing the message split out into a separate
function just for that. For some functions there will also be separate
pre and post "work" phases to prepare or update state.
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
This is the first drop of the new state machine code.
The rewrite has the following objectives:
- Remove duplication of state code between client and server
- Remove duplication of state code between TLS and DTLS
- Simplify transitions and bring the logic together in a single location
so that it is easier to validate
- Remove duplication of code between each of the message handling functions
- Receive a message first and then work out whether that is a valid
transition - not the other way around (the other way causes lots of issues
where we are expecting one type of message next but actually get something
else)
- Separate message flow state from handshake state (in order to better
understand each)
- message flow state = when to flush buffers; handling restarts in the
event of NBIO events; handling the common flow of steps for reading a
message and the common flow of steps for writing a message etc
- handshake state = what handshake message are we working on now
- Control complexity: only the state machine can change state: keep all
the state changes local to a file
This builds on previous state machine related work:
- Surface CCS processing in the state machine
- Version negotiation rewrite
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
The function ssl3_get_message gets a whole message from the underlying bio
and returns it to the state machine code. The new state machine code will
split this into two discrete steps: get the message header and get the
message body. This commit splits the existing function into these two
sub steps to facilitate the state machine implementation.
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
If something was "present in all versions" of SSLeay, or if it was
added to a version of SSLeay (and therefore predates OpenSSL),
remove mention of it. Documentation history now starts with OpenSSL.
Remove mention of all history before OpenSSL 0.9.8, inclusive.
Remove all AUTHOR sections.
Reviewed-by: Tim Hudson <tjh@openssl.org>
Previous language was unclear. New language isn't pretty but I believe
it is more accurate.
Signed-off-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Ben Laurie <ben@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Configure has, so far, had no control at all of which 'no-' options it
can be given. This means that, for example, someone could configure
with something absurd like 'no-stack' and then watch the build crumble
to dust... or file a bug report.
This introduces some sanity into the possible choices.
The added list comes from looking for the explicit ones used in
Configure, and from grepping after OPENSSL_NO_ in all source files.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Because the default error macro generator assumes the header file with
error macros is in include/openssl and therefore generates a C file
with error texts that include <openssl/{name}.h>, we need to generate
the error macros and texts for CT separately, since the CT module
doesn't follow the default criteria.
Reviewed-by: Matt Caswell <matt@openssl.org>
The function SSLv23_server_method() is an old name. New code should use
TLS_server_method() instead. Therefore don't use SSLv23_server_method() in
an example in the docs.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Change the sanity check in PACKET_buf_init to check for excessive length
buffers, which should catch the interesting cases where len has been cast
from a negative value whilst avoiding any undefined behaviour.
RT#4094
Reviewed-by: Richard Levitte <levitte@openssl.org>
Check for Host header in query_responder instead of process_responder. This
also fixes a memory leak in the old code if the headers was NULL.
Reviewed-by: Richard Levitte <levitte@openssl.org>
When using command line applications errors occur when trying to
load engines specified in a config file. Introduced by commit
a0a82324f9
RT#4093
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
There are a number of engines in the OpenSSL source code which are now
obsolete. The following engines have been removed: 4758cca, aep, atalla,
cswift, nuron, sureware.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Don't mark a certificate as self signed if keyUsage is present and
certificate signing not asserted.
PR#3979
Reviewed-by: Matt Caswell <matt@openssl.org>
RFC5753 requires that we omit parameters for AES key wrap and set them
to NULL for 3DES wrap. OpenSSL decrypt uses the received algorithm
parameters so can transparently handle either form.
Reviewed-by: Andy Polyakov <appro@openssl.org>
Previous OpenSSL versions used -set_serial, but master was using
-set-serial - so rename it back to the old version.
RT#4059
Reviewed-by: Richard Levitte <levitte@openssl.org>
Loading the config file after processing command line options can
cause problems, e.g. where an engine provides new ciphers/digests
these are not then recoginised on the command line. Move the
default config file loading to before the command line option
processing. Whilst we're doing this we might as well centralise
this instead of doing it individually for each application. Finally
if we do it before the OpenSSL_add_ssl_algorithms() call then
ciphersuites provided by an engine (e.g. GOST) can be available to
the apps.
RT#4085
RT#4086
Reviewed-by: Richard Levitte <levitte@openssl.org>
There used to be options -macopt and -sigopt in <=1.0.2 for the dgst
command line app. These were incorrectly spelled as -macop and -sigop in
master.
RT#4072
Reviewed-by: Andy Polyakov <appro@openssl.org>
Note that this commit constifies a user callback parameter and therefore
will break compilation for applications using this callback. But unless
they are abusing write access to the buffer, the fix is trivial.
Reviewed-by: Andy Polyakov <appro@openssl.org>
mkdef.pl was getting confused by:
# ifdef OPENSSL_NO_RMD160
# error RIPEMD is disabled.
# endif
Changing RIPEMD to RMD160 solves it. Fix suggested by Steve Henson.
Reviewed-by: Rich Salz <rsalz@openssl.org>
The function int_rsa_verify is an internal function used for verifying an
RSA signature. It takes an argument |dtype| which indicates the digest type
that was used. Dependant on that digest type the processing of the
signature data will vary. In particular if |dtype == NID_mdc2| and the
signature data is a bare OCTETSTRING then it is treated differently to the
default case where the signature data is treated as a DigestInfo (X509_SIG).
Due to a missing "else" keyword the logic actually correctly processes the
OCTETSTRING format signature first, and then attempts to continue and
process it as DigestInfo. This will invariably fail because we already know
that it is a bare OCTETSTRING.
This failure doesn't actualy make a real difference because it ends up at
the |err| label regardless and still returns a "success" result. This patch
just cleans things up to make it look a bit more sane.
RT#4076
Reviewed-by: Richard Levitte <levitte@openssl.org>
BN_with_flags() will read the dest->flags to keep the BN_FLG_MALLOCED but
overwrites everything else.
Signed-off-by: Kurt Roeckx <kurt@roeckx.be>
Reviewed-by: Rich Salz <rsalz@openssl.org>
MR #1231
The function ssl_check_for_safari fingerprints the incoming extensions
to see whether it is one of the broken versions of safari. However it was
failing to reset the PACKET back to the same position it started in, hence
causing some extensions to be skipped incorrectly.
Reviewed-by: Emilia Käsper <emilia@openssl.org>
-Allow mingw debug builds to fail on Travis CI
-Fix Travis email notifications config
-Rename a variable to avoid a bogus warning with old GCC
error: declaration of ``dup'' shadows a global declaration [-Werror=shadow]
-Disable pedantic ms-format warnings with mingw
-Properly define const DH parameters
-Restore --debug flag in Travis CI builds; -d would get incorrectly passed
to ./Configure in mingw debug builds.
Signed-off-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
This change introduces short names and NIDs for Russian GOST ciphers
according to GOST R 34.13-2015
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
The user callback takes a non-const pointer, so don't pass PACKET data
to it directly; rather, grab a local copy.
Reviewed-by: Matt Caswell <matt@openssl.org>
Move all packet parsing to the beginning of the method. This limits the
SSLv2 compatibility soup to the parsing, and makes the rest of the
processing uniform.
This is also needed for simpler EMS support: EMS servers need to do an
early scan for EMS to make resumption decisions. This'll be easier when
the entire ClientHello is parsed in the beginning.
As a side effect,
1) PACKETize ssl_get_prev_session and tls1_process_ticket; and
2) Delete dead code for SSL_OP_NETSCAPE_REUSE_CIPHER_CHANGE_BUG.
Reviewed-by: Matt Caswell <matt@openssl.org>
Some makedepend mechanisms remove all directory information in the
target, so a dependency can looks like this:
ssl3_record.o: record/ssl3_record.c
However, that doesn't quite suit us, our Makefile has us build
record/ssl3_record.o rather than ssl3_record.o.
To clear this up, a change to util/clean-depend.pl takes care of this
case by looking up the original file in the dependencies and restoring
the directory information from it.
Reviewed-by: Ben Laurie <ben@openssl.org>
Even though SOCKET is effectively declared as (void *) on Windows, it's
not actually a pointer, but an index within per-process table of
kernel objects. The table size is actually limited and its upper limit
is far below upper limit for signed 32-bit integer. This is what makes
cast in question possible.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Tim Hudson <tjh@openssl.org>
When a decoding error in ASN.1 occurs only free up the partial structure
at the top level. This simplifies embedded handling and fixes freeing
up of structures when presented with malformed input.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Any time you configure with enable-deprecated, make depend would
scream bloody murder. This change has it quiet down a bit.
Reviewed-by: Rich Salz <rsalz@openssl.org>
This patch updates the "DEFAULT" cipherstring to be
"ALL:!COMPLEMENTOFDEFAULT:!eNULL". COMPLEMENTOFDEFAULT is now defined
internally by a flag on each ciphersuite indicating whether it should be
excluded from DEFAULT or not. This gives us control at an individual
ciphersuite level as to exactly what is in DEFAULT and what is not.
Finally all DES, RC4 and RC2 ciphersuites are added to COMPLEMENTOFDEFAULT
and hence removed from DEFAULT.
Reviewed-by: Tim Hudson <tjh@openssl.org>
Looks like someone forgot to do a "make update" since crypto/ts/Makefile
keeps changing. So include that.
Second is that the declare_dh_bn macro fools the libeay.num script.
The declarations are only needed in one file (dh_rfc5114) so remove
them from the header and put the "raw" declarations directly into that
file.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Occaisionally we have had problems where there are duplicated ordinals in
libeay.num or ssleay.num. This adds a test for this issue.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Add additional NID references in the CMS/SMIME capabilities code to cater
for GOST12.
Patch supplied by Dmitry Belyavsky <beldmit@gmail.com>
Reviewed-by: Rich Salz <rsalz@openssl.org>
Much related/similar work also done by
Ivan Nestlerode <ivan.nestlerode@sonos.com>
+Replace FILE BIO's with dummy ops that fail.
+Include <stdio.h> for sscanf() even with no-stdio (since the declaration
is there). We rely on sscanf() to parse the OPENSSL_ia32cap environment
variable, since it can be larger than a 'long'. And we don't rely on the
availability of strtoull().
+Remove OPENSSL_stderr(); not used.
+Make OPENSSL_showfatal() do nothing (currently without stdio there's
nothing we can do).
+Remove file-based functionality from ssl/. The function
prototypes were already gone, but not the functions themselves.
+Remove unviable conf functionality via SYS_UEFI
+Add fallback definition of BUFSIZ.
+Remove functions taking FILE * from header files.
+Add missing DECLARE_PEM_write_fp_const
+Disable X509_LOOKUP_hash_dir(). X509_LOOKUP_file() was already compiled out,
so remove its prototype.
+Use OPENSSL_showfatal() in CRYPTO_destroy_dynlockid().
+Eliminate SRP_VBASE_init() and supporting functions. Users will need to
build the verifier manually instead.
+Eliminate compiler warning for unused do_pk8pkey_fp().
+Disable TEST_ENG_OPENSSL_PKEY.
+Disable GOST engine as is uses [f]printf all over the place.
+Eliminate compiler warning for unused send_fp_chars().
Signed-off-by: Rich Salz <rsalz@akamai.com>
Reviewed-by: Tim Hudson <tjh@openssl.org>
On Windows OPENSSL_EXPORT_VAR_AS_FUNCTION is defined and in a sense
this modification simply harmonizes it with "VAR_AS_VAR".
Reviewed-by: Rich Salz <rsalz@openssl.org>
RFC 5077 section 3.3 says:
If the server determines that it does not want to include a
ticket after it has included the SessionTicket extension in the
ServerHello, then it sends a zero-length ticket in the
NewSessionTicket handshake message.
Previously the client would fail upon attempting to allocate a
zero-length buffer. Now, we have the client ignore the empty ticket and
keep the existing session.
Reviewed-by: Matt Caswell <matt@openssl.org>
The ossltest engine wraps the built-in implementation of aes128-cbc.
Normally in an engine the cipher_data structure is automatically allocated
by the EVP layer. However this relies on the engine specifying up front
the size of that cipher_data structure. In the case of ossltest this value
isn't available at compile time. This change makes the ossltest engine
allocate its own cipher_data structure instead of leaving it to the EVP
layer.
Reviewed-by: Andy Polyakov <appro@openssl.org>
Otherwise the ./config script fails with errors like:
> Operating system: x86_64-whatever-linux2
> This system (linux-x86_64) is not supported. See file INSTALL for details.
The failure was introduced by a93d3e0.
RT#4062
Reviewed-by: Andy Polyakov <appro@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
The windows test uses the pseudo file "nul" to indicate no file for the
-CApath option. This does not work on all versions of Windows. Instead use
the new -no-CApath option.
Reviewed-by: Andy Polyakov <appro@openssl.org>
For those command line options that take the verification options
-CApath and -CAfile, if those options are absent then the default path or
file is used instead. It is not currently possible to specify *no* path or
file at all. This change adds the options -no-CApath and -no-CAfile to
specify that the default locations should not be used to all relevant
applications.
Reviewed-by: Andy Polyakov <appro@openssl.org>
Previously you could only set both the default path and file locations
together. This adds the ability to set one without the other.
Reviewed-by: Andy Polyakov <appro@openssl.org>
As some of ARM processors, more specifically Cortex-Mx series, are
Thumb2-only, we need to support Thumb2-only builds even in assembly.
Reviewed-by: Tim Hudson <tjh@openssl.org>
Clarify that user code is required to allocate sufficient space for the
addressing scheme in use in the call to DTLSv1_listen.
Reviewed-by: Andy Polyakov <appro@openssl.org>
Use sockaddr_storage not sockaddr for the client IP address to allow for
IPv6.
Also fixed a section of code which was conditional on OPENSSL_NO_DTLS1
which should not have been.
Reviewed-by: Andy Polyakov <appro@openssl.org>
This commit adds documentation for the new -listen option to s_server. Along
the way it also adds documentation for -dtls, -dtls1 and -dtls1_2 which was
missing.
Reviewed-by: Andy Polyakov <appro@openssl.org>
DTLSv1_listen is a commonly used function within DTLS solutions for
listening for new incoming connections. This commit adds support to s_server
for using it.
Reviewed-by: Andy Polyakov <appro@openssl.org>
The old implementation of DTLSv1_listen which has now been replaced still
had a few vestiges scattered throughout the code. This commit removes them.
Reviewed-by: Andy Polyakov <appro@openssl.org>
The existing implementation of DTLSv1_listen() is fundamentally flawed. This
function is used in DTLS solutions to listen for new incoming connections
from DTLS clients. A client will send an initial ClientHello. The server
will respond with a HelloVerifyRequest containing a unique cookie. The
client the responds with a second ClientHello - which this time contains the
cookie.
Once the cookie has been verified then DTLSv1_listen() returns to user code,
which is typically expected to continue the handshake with a call to (for
example) SSL_accept().
Whilst listening for incoming ClientHellos, the underlying BIO is usually in
an unconnected state. Therefore ClientHellos can come in from *any* peer.
The arrival of the first ClientHello without the cookie, and the second one
with it, could be interspersed with other intervening messages from
different clients.
The whole purpose of this mechanism is as a defence against DoS attacks. The
idea is to avoid allocating state on the server until the client has
verified that it is capable of receiving messages at the address it claims
to come from. However the existing DTLSv1_listen() implementation completely
fails to do this. It attempts to super-impose itself on the standard state
machine and reuses all of this code. However the standard state machine
expects to operate in a stateful manner with a single client, and this can
cause various problems.
A second more minor issue is that the return codes from this function are
quite confused, with no distinction made between fatal and non-fatal errors.
Most user code treats all errors as non-fatal, and simply retries the call
to DTLSv1_listen().
This commit completely rewrites the implementation of DTLSv1_listen() and
provides a stand alone implementation that does not rely on the existing
state machine. It also provides more consistent return codes.
Reviewed-by: Andy Polyakov <appro@openssl.org>
Add the ability to peek at a message from the DTLS read BIO. This is needed
for the DTLSv1_listen rewrite.
Reviewed-by: Andy Polyakov <appro@openssl.org>
The openssl rehash command is not available on some platforms including
Windows. This change skips the associated tests if rehash is not available.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Since SSLv3, a CipherSuite is always 2 bytes. The only place where we
need 3-byte ciphers is SSLv2-compatible ClientHello processing.
So, remove the ssl_put_cipher_by_char indirection.
Reviewed-by: Rich Salz <rsalz@openssl.org>
BUF_strndup was calling strlen through BUF_strlcpy, and ended up reading
past the input if the input was not a C string.
Make it explicitly part of BUF_strndup's contract to never read more
than |siz| input bytes. This augments the standard strndup contract to
be safer.
The commit also adds a check for siz overflow and some brief documentation
for BUF_strndup().
Reviewed-by: Matt Caswell <matt@openssl.org>
For all release branches. It adds travis build support. If you don't
have a config file it uses the default (because we enabled travis for the
project), which uses ruby/rake/rakefiles, and you get confusing "build
still failing" messages.
Reviewed-by: Andy Polyakov <appro@openssl.org>
If we use BIO_new_file(), on Windows it'll jump through hoops to work
around their unusual charset/Unicode handling. it'll convert a UTF-8
filename to UCS-16LE and attempt to use _wfopen().
If you use BIO_read_filename(), it doesn't do this. Shouldn't it be
consistent?
It would certainly be nice if SSL_use_certificate_chain_file() worked.
Also made BIO_C_SET_FILENAME work (rsalz)
Signed-off-by: Rich Salz <rsalz@akamai.com>
Reviewed-by: Andy Polyakov <appro@openssl.org>
There are a couple of minor fixes here:
1) Handle the case when RegisterEventSource() fails (which it may for
various reasons) and do the work of logging the event only if it succeeds.
2) Handle the case when ReportEvent() fails and do our best in debug builds
to at least attempt somehow indicate that something has gone wrong. The
typical situation would be someone running tools like DbMon, DBWin32,
DebugView or just having the debugger attached. The intent is to make sure
that at least some data will be captured so that we can save hours and days
of debugging time.
3) Minor fix to change the MessageBox() flag to MB_ICONERROR. Though the
value of MB_ICONERROR is the same value as MB_ICONSTOP, the intent is
better conveyed by using MB_ICONERROR.
Testing performed:
1) Clean compilation for debug-VC-WIN32 and VC-WIN32.
2) Good test results (nmake -f ms\ntdll.mak test) for debug-VC-WIN32 and
VC-WIN32.
3) Stepped through relevant changes using WinDBG and exercised the impacted
code paths.
Signed-off-by: Rich Salz <rsalz@akamai.com>
Reviewed-by: Matt Caswell <matt@openssl.org>
Changes required to add GOST support to PKCS12
Based on a patch provided by Dmitry Belyavsky <beldmit@gmail.com>
Reviewed-by: Stephen Henson <steve@openssl.org>
GOST extends PKCS5 PBES2/PBKDF2 with some additional GOST specific PRFs.
Based on a patch provided by Dmitry Belyavsky <beldmit@gmail.com>
Reviewed-by: Stephen Henson <steve@openssl.org>
There were some memory leaks in the creation of an SRP verifier (both on
successful completion and also on some error paths).
Reviewed-by: Emilia Käsper <emilia@openssl.org>
The -srpvfile option was broken in the srp command line app. Using it would
always result in "-dbfile and -configfile cannot be specified together."
The error message is also wrong because the option is "-srpvfile" not
"-dbfile", so that has been fixed too.
Reviewed-by: Emilia Käsper <emilia@openssl.org>
It depended on 'openssl no-wp', which always exited with code 0, so
this test would never be performed, and this, I never discovered that
the program it's supposed to run was misspellt. Furthermore, the
feature to check is 'whirlpool', not 'wp'.
All corrected.
Reviewed-by: Stephen Henson <steve@openssl.org>
Have a look at the directories in crypto/, I found reason to add
checks on CMAC and HMAC. This might be completely irrelevant, but I
prefered covering too much than not enough.
Reviewed-by: Stephen Henson <steve@openssl.org>
A grep of OPENSSL_NO_ in the rest of the source tree revealed a few
more features to check.
NOTE: there are some of those macros that I ignore because a check of
them doesn't seem useful to external apps. This might change later on.
Reviewed-by: Stephen Henson <steve@openssl.org>
After a grep of OPENSSL_NO_ in apps/*.c, a few more features that may
be interesting to check the availability of came up.
Reviewed-by: Stephen Henson <steve@openssl.org>
Add Utils.pm for test utilities. This currently just contains one function:
disabled which checks if a feature is disabled based on the output of
openssl list -disabled
Reviewed-by: Richard Levitte <levitte@openssl.org>
Obvious typo, and it took configuring with 'zlib' to discover it,
otherwise there was a previous skip that bypassed this section
entirely.
Reviewed-by: Tim Hudson <tjh@openssl.org>
TLSProxy was failing if we are Configured with compression because it
doesn't support it. This fix simply switches compression off for the
purposes of the test.
Reviewed-by: Richard Levitte <levitte@openssl.org>
New option "openssl list -disabled" this lists a set of disabled features
in a form which can be conveniently parsed by the test framework so it
knows which tests to skip.
Reviewed-by: Richard Levitte <levitte@openssl.org>
When an OID is decoded see if it exists in the registered OID table
and if so return the shared OID instead of dynamically allocating
an ASN1_OBJECT.
Reviewed-by: Rich Salz <rsalz@openssl.org>
If test/recipes/40-test_rehash.t is executed as root, the last test
will fail, since the created directory will remain writable no matter
what. Make sure it complains loudly about being run as root.
Reviewed-by: Rich Salz <rsalz@openssl.org>
In master we have the function OPENSSL_clear_free(x,y), which immediately
returns if x == NULL. In <=1.0.2 this function does not exist so we have to
do:
OPENSSL_cleanse(x, y);
OPENSSL_free(x);
However, previously, OPENSSL_cleanse did not check that if x == NULL, so
the real equivalent check would have to be:
if (x != NULL)
OPENSSL_cleanse(x, y);
OPENSSL_free(x);
It would be easy to get this wrong during cherry-picking to other branches
and therefore, for safety, it is best to just ensure OPENSSL_cleanse also
checks for NULL.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Rewrite EVP_DecodeUpdate.
In particular: reject extra trailing padding, and padding in the middle
of the content. Don't limit line length. Add tests.
Previously, the behaviour was ill-defined, and depended on the position
of the padding within the input.
In addition, this appears to fix a possible two-byte oob read.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Dr Stephen Henson <steve@openssl.org>
The bookmark API results in a lot of boilerplate error checking that can
be much more easily achieved with a simple struct copy. It also lays the
path for removing the third PACKET field.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Simplify encrypted premaster secret reading by using new methods in the
PACKET API.
Don't overwrite the packet buffer. RSA decrypt accepts truncated
ciphertext with leading zeroes omitted, so it's even possible that by
crafting a valid ciphertext with several leading zeroes, this could
cause a few bytes out-of-bounds write. The write is harmless because of
the size of the underlying message buffer, but nevertheless we shouldn't
write into the packet.
Reviewed-by: Matt Caswell <matt@openssl.org>
New ASN.1 macro ASN1_EMBED. This is the same as ASN1_SIMPLE except the
structure is not allocated: it is part of the parent. That is instead of
FOO *x;
it must be:
FOO x;
This reduces memory fragmentation and make it impossible to accidentally
set a mandatory field to NULL.
This currently only works for SEQUENCE and since it is equivalent to
ASN1_SIMPLE it cannot be tagged, OPTIONAL, SET OF or SEQUENCE OF.
Reviewed-by: Rich Salz <rsalz@openssl.org>
When OPENSSL_EXPORT_VAR_AS_FUNCTION is defined, the static_ASN1_ITEM_start
macro doesn't exist so the build fails. This problem was introduced in
commit df2ee0e.
Reviewed-by: Stephen Henson <steve@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
These notes include the use of HARNESS_VERBOSE (see the manual for
Test::Harness) and the method to enumerate specific tests to run.
Reviewed-by: Emilia Käsper <emilia@openssl.org>
For server use a PSK identity hint value in the CERT structure which
is inherited when SSL_new is called and which allows applications to
set hints on a per-SSL basis. The previous version of
SSL_use_psk_identity_hint tried (wrongly) to use the SSL_SESSION structure.
PR#4039
Reviewed-by: Matt Caswell <matt@openssl.org>
If the field separator isn't specified through -nameopt then use
XN_FLAG_SEP_CPLUS_SPC instead of printing nothing and returing an error.
PR#2397
Reviewed-by: Tim Hudson <tjh@openssl.org>
Functions to retrieve the function pointer of an existing method: this
can be used to create a method which intercepts or modifies the behaviour
of an existing method while retaining most of the existing behaviour.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Fix both the caller to error out on malloc failure, as well as the
eventual callee to handle a NULL gracefully.
Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
This code does open-coded division on 64-bit quantities and thus when
building with GCC on 32-bit platforms will require functions such as
__umoddi3 and __udivdi3 from libgcc.
In constrained environments such as firmware, those functions may not
be available. So make it possible to compile out SCT support, which in
fact (in the case of UEFI) we don't need anyway.
Signed-off-by: Rich Salz <rsalz@akamai.com>
Reviewed-by: Tim Hudson <tjh@openssl.org>
If a test recipe does something like this:
indir "foo.$$" => sub {
chmod 0500, File::Spec->curdir();
ok(run(app(["something"])));
}
we get a problem, because we were storing the temporary stderr file in
the current directory at all times (so while inside the 'indir', we
would attemp to store it in "foo.$$").
So, change our ways to always store that temporary file in the exact
same location, defined by the environment variable RESULT_D, or
failing that TEST_D, or failing that $TOP/test.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Use each once in s3_srvr.c to show how they work.
Also fix a bug introduced in c3fc7eeab8
and made apparent by this change:
ssl3_get_next_proto wasn't updating next_proto_negotiated_len
Reviewed-by: Matt Caswell <matt@openssl.org>
This provides support for building in the EDK II reference implementation
of UEFI. Most UEFI firmware in existence uses OpenSSL for implementing
the core cryptographic functionality needed for Secure Boot.
This has always previously been handled with external patches to OpenSSL
but we are now making a concerted effort to eliminate those.
In this mode, we don't actually use the OpenSSL makefiles; we process
the MINFO file generated by 'make files' and incorporate it into the
EDK2 build system.
Since EDK II builds for various targets with varying word size and we
need to have a single prepackaged configuration, we deliberately don't
hard-code the setting of SIXTY_FOUR_BIT vs. THIRTY_TWO_BIT in
opensslconf.h. We bypass that for OPENSSL_SYS_UEFI and allow EDK II
itself to set those, depending on the architecture.
For x86_64, EDK II sets SIXTY_FOUR_BIT and thus uses 'long long' for the
64-bit type, even when building with GCC where 'long' is also 64-bit. We
do this because the Microsoft toolchain has 32-bit 'long'.
Signed-off-by: Rich Salz <rsalz@akamai.com>
Reviewed-by: Tim Hudson <tjh@openssl.org>
Both now warn once if directory isn't writeable.
Both now warn on file-write errors (multiple times).
Update manpage to describe both program and script correctly.
Reviewed-by: Richard Levitte <levitte@openssl.org>
test_ecdh and test_ecdsa are made to depend on no-ec being false.
test_hmac is made not to depend on algorithm at all.
Based on a contribution by Alessandro Ghedini <alessandro@ghedini.me>
Reviewed-by: Rich Salz <rsalz@openssl.org>
Having a general fill-column of 78 may look nice at first sight, but
if the edited text gets indented a bit afterward (such as with git
comments in 'git log'), it suddenly turns not so nice on a classic 80
columns terminal. A fill-column of 70 will serve us better.
Reviewed-by: Rich Salz <rsalz@openssl.org>
The verify_extra_test was recently changed to take its parameters as
arguments instead of having them hardcoded.
Reviewed-by: Rich Salz <rsalz@openssl.org>
This recipe counted too much on being called with test/ as its current
working directory. That's a mistake on, for example, Windows.
Reviewed-by: Rich Salz <rsalz@openssl.org>
The testsslproxy tests turned out to be useless as they were. They
were really just for show and the results were ignore. Now they are
changed into a more veerifiable test
Reviewed-by: Rich Salz <rsalz@openssl.org>
Be careful when shifting in a function argument, you end up changing
the caller's value. Instead, when it is an array, make a shallow copy
and shift in that instead.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Some tests were copied from test_jpake, but the title wasn't changed
accordingly. This might seem like a small thing, but it does affect
the log file name...
Reviewed-by: Rich Salz <rsalz@openssl.org>
MINFO may be an old file lying around, which might have
00-check_testexes.t produce incorrect results. To make sure this
doesn't happen, check the variable VERSION in it against the same
variable in the top Makefile.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Before trying to read MINFO, we have no idea how many to test for, and
because skip expects to get an exact number somehow, it's better to
use 'plan skip_all'.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Following the commit from July 2 that removed netscape formated certs,
it is no longer necessary to have conversion tests for it.
Reviewed-by: Rich Salz <rsalz@openssl.org>
VMS files are normally record oriented rather than stream oriented.
This means that every write() will create a new record, which is seen
as a line of its own, regardless of if there was a \n in there or not.
bntest uses BN_print, which prints out number with more than one
write(), thereby dividing up the numbers in several lines, which
greatly disturbs the post-bntest checks that expect to find a full
formula to calculate on one line.
So, for VMS, we need to push the linebuffer filter on the out BIO.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Unfortunately, a file spec with character range globs interfere with
paths on VMS, and are therefore disabled. Rework this test to collect
a list of expected tests and a list of all recipes and compare the two
using grep.
Reviewed-by: Rich Salz <rsalz@openssl.org>
It became tedious as well as error prone to have all recipes use
Test::More as well as OpenSSL::Test. The easier way is to make
OpenSSL::Test an extension of Test::More, thereby having all version
checks as well as future checks firmly there. Additionally, that
allows us to extend existing Test::More functions if the need would
arise.
Reviewed-by: Rich Salz <rsalz@openssl.org>
When the environment variable STOPTEST is defined (with any value other
than the empty string), the test machinery in OpenSSL::Test goes into a
different mode that will stop all testing at the end of a failing recipe.
Reviewed-by: Rich Salz <rsalz@openssl.org>
00-check_testexes.t was a way for me to check that I didn't forget a
compiled test app. The way it worked was to require MINFO to be present.
Considering the need for this test has diminished considerably at this
point, I might as well tone down the requirement, and have it skip the
test (and not fail it) if MINFO isn't present.
Reviewed-by: Rich Salz <rsalz@openssl.org>
With the new testing framework, building a test target with mk1mf.pl
becomes a very simple thing. And especially, no more need to do the
amount of hackery in unix.pl we did.
Also, some tests need a working apps/CA.pl as well as rehashed certs
in certs/demo. So, move the code creating those files so it gets done
regardless, not just in non-mk1mf environments.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Very simple test recipes easily become tedious, so they might benefit
from being made as simple as possible. Therefore, OpenSSL::Test::Simple
is born. It currently provides but one function, simple_test(), which
takes a minimum of two parameters (test name and program to run), with
the optional third, being the algorithm to be checked for before
running the test itself.
All recipes with that simple thing to do have been rewritten to be as
minimal as possible.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Also remove recipes/00-check_testalltests.t, since it will lack the
information from the now gone alltests target.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Note that this required a change in constant_time_test.c, as it says
"ok", which interferes with what Test::Harness expects to see. I had
constant_time_test.c say "success" instead.
Reviewed-by: Rich Salz <rsalz@openssl.org>
As tests are done until now, there are a few scripts that look almost,
but not quite the same. tkey, tx509, tcrl, tpkcs7, treq, tsid and
probably a few more.
recipes/tconversions.pl is a helper script that generalises the
function of each of those, and can then be used in a general manner
from test recipes.
Reviewed-by: Rich Salz <rsalz@openssl.org>
The math recipes are among the heavier, but also quite important.
For the BN test, we have previously relied on bc to verify the numbers.
Unfortunately, bc doesn't exist everywhere, making tests on some platforms
rather painful. With the new recipe (recipes/10-test_bn.t), we rely
on perl's Math::BigInt and a homegrown simple calculator (recipes/bc.pl)
that can do enough to cover for bc.
Reviewed-by: Rich Salz <rsalz@openssl.org>
The idea with this perl based testing framework is to make use of
what's delivered with perl and exists on all sorts of platforms.
The choice came to using Test::More and Test::Harness, as that seems
to be the most widely spread foundation, even if perl is aged.
The main runner of the show is run_tests.pl. As it currently stands,
it's designed to run from inside Makefile, but it's absolutely
possible to run it from the command line as well, like so:
cd test
OPENSSL_SRCDIR=.. perl run_tests.pl
The tester scripts themselves are stored in the subdirectory recipes/,
and initially, we have two such scripts, recipes/00-check_testalltests.t
and recipes/00-check_testexes.t. recipes/00-check_testalltests.t will
pick out the dependencies of "alltests" in test/Makefile, and check if
it can find recipes with corresponding names. recipes/00-check_testexes.t
does something similar, but bases it on existing compiled test binaries.
They make it easy to figure out what's to be added, and will be
removed when this effort is finished.
Individual recipes can be run as well, of course, as they are perl
scripts in themselves. For example, you can run only
recipes/00-check_testexes.t like so:
cd test
OPENSSL_SRCDIR=.. perl recipes/00-check_testexes.t
To make coding easier, there's a routine library OpenSSL::Test, which
is reachable in a perl script like so:
use lib 'testlib';
use OpenSSL::Test;
Reviewed-by: Rich Salz <rsalz@openssl.org>
The build was breaking due to a Makefile recipe expecting an openssl
version to be on the PATH with support for the rehash command.
Reviewed-by: Ben Laurie <ben@openssl.org>
On Unix/Linux platforms, merge c_rehash script into openssl as a
C program.
Signed-off-by: Rich Salz <rsalz@akamai.com>
Reviewed-by: Tim Hudson <tjh@openssl.org>
To set both the incoming and outgoing data when 'encrypting' or
'decrypting' to FORMAT_BASE64 wasn't quite the right thing to do.
Reviewed-by: Tim Hudson <tjh@openssl.org>
If the output to stdout or the input from stdin is meant to be binary,
it's deeply unsetting to get the occasional LF converted to CRLF or
the other way around. If someone happens to forget to redirect stdin
or stdout, they will get gibberish anyway, line ending conversion will
not change that.
Therefore, let's not have dup_bio_* decide unilaterally what mode the
BIO derived from stdin and stdout, and rather let the app decide by
declaring the intended format.
Reviewed-by: Tim Hudson <tjh@openssl.org>
The test executables use standard output and standard error for text output,
so let's open the corresponding BIOs in text mode.
Reviewed-by: Tim Hudson <tjh@openssl.org>
The different apps had the liberty to decide whether they would open their
input and output files in binary mode or not, which could be confusing if
two different apps were handling the same type of file in different ways.
The solution is to centralise the decision of low level file organisation,
and that the apps would use a selection of formats to state the intent of
the file.
Reviewed-by: Tim Hudson <tjh@openssl.org>
Most of all, we needed to sort out which ones are binary and which
ones are text, and make sure they are treated accordingly and
consistently so
Reviewed-by: Tim Hudson <tjh@openssl.org>
Depending on platform, verify_extra_test may fail because it relies on
test/ being the current working directory. Make it get all the required
files on the command line instead to solve that issue.
Reviewed-by: Tim Hudson <tjh@openssl.org>
Most of the accessors existed and were already used so it was easy.
TS_VERIFY_CTX didn't have accessors/settors so I added the simple and
obvious ones, and changed the app to use them. Also, within crypto/ts,
replaced the functions with direct access to the structure members
since we generally aren't opaque within a directory.
Also fix RT3901.
Reviewed-by: Tim Hudson <tjh@openssl.org>
In some environments, such as firmware, the current system time is entirely
meaningless. Provide a clean mechanism to suppress the checks against it.
Signed-off-by: Rich Salz <rsalz@akamai.com>
Reviewed-by: Tim Hudson <tjh@openssl.org>
Since there seems to be no way to avoid linking to libssl and libcrypto,
just wrap the test. This unbreaks "shared" builds when using clang and/or
OS X.
Signed-off-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Ben Laurie <ben@openssl.org>
Commit d4ab70f27c added a test program
to check that the NULL pointer is represented as all zero bits, but
did not specify a build rule for that new executable. On many platforms,
the implicit rule sufficed, since nptest is a very simple program, but
for at least darwin-i386-cc, an explicit rule is needed. On darwin-i386-cc,
the implicit rule targetted a 64-bit executable, but the object file
containing the definition of main was a 32-bit object, which the linker
excluded from consideration, resulting in a link failure due to no
definition for _main.
Add the missing build rule to fix the build on such platforms.
Signed-off-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Dr. Stephen Henson <steve@openssl.org>
This does 64-bit division and multiplication, and on 32-bit platforms
pulls in libgcc symbols (and MSVC does similar) which may not be
available. Mostly done by David Woodhouse.
Reviewed-by: Dr. Stephen Henson <steve@openssl.org>
This reverts the non-cleanup parts of commit c73ad69017. We do actually
have a reasonable use case for OPENSSL_NO_RFC3779 in the EDK2 UEFI
build, since we don't have a strspn() function in our runtime environment
and we don't want the RFC3779 functionality anyway.
In addition, it changes the default behaviour of the Configure script so
that RFC3779 support isn't disabled by default. It was always disabled
from when it was first added in 2006, right up until the point where
OPENSSL_NO_RFC3779 was turned into a no-op, and the code in the
Configure script was left *trying* to disable it, but not actually
working.
Signed-off-by: Rich Salz <rsalz@akamai.com>
Reviewed-by: Tim Hudson <tjh@openssl.org>
Add test to check PBE lookups: these can fail if the PBE table is not
correctly orders. Add to "make test".
Reviewed-by: Matt Caswell <matt@openssl.org>
There are many places (nearly 50) where we malloc and then memset.
Add an OPENSSL_zalloc routine to encapsulate that.
(Missed one conversion; thanks Richard)
Also fixes GH328
Reviewed-by: Richard Levitte <levitte@openssl.org>
Use SSL_CONF for certificate handling is ssltest.c, this changes the
behaviour slightly: the -cert and -key options are no longer recognised
and a default certificate file is not used.
This change means that -s_cert and -c_cert can be used mode than once
to support use of multiple certificates.
Reviewed-by: Matt Caswell <matt@openssl.org>
Avoid using cnid = 0, use NID_undef instead, and return early instead
of trying to find an instance of that in the subject DN.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Initialize pointers in param id by the book (explicit NULL assignment,
rather than just memset 0).
In x509_verify_param_zero() set peername to NULL after freeing it.
In x509_vfy.c's internal check_hosts(), avoid potential leak of
possibly already non-NULL peername. This is only set when a check
succeeds, so don't need to do this repeatedly in the loop.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Fix the setup of DTLS1.2 buffers to take account of the Header
Reviewed-by: Emilia Käsper <emilia@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
clang suggests %llu instead, but it isn't clear that is portable on
all platforms.
C99 and above define a handy macro for us, so we try to use that
definition and fall back to current definition if needed (though we
switch to 'u' for unsigned).
Reviewed-by: Matt Caswell <matt@openssl.org>
The NULL cipher case can't actually happen because we have no
EVP_PBE_CTL combinations where cipher_nid is -1 and keygen is
PKCS12_PBE_keyivgen. But make the code more obviously correct.
Reviewed-by: Matt Caswell <matt@openssl.org>
- Pass in the right ciphertext length to ensure we're indeed testing
ciphertext corruption (and not truncation).
- Only test one mutation per byte to not make the test too slow.
- Add a separate test for truncated ciphertexts.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Because we recently encourage people to have a .dir-locals.el, it's a good
idea to ignore it on a git level.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Remove asn1-kludge option from the req utility. It was a decade old
workaround for CAs and software which required an invalid encoding
of PKCS#10 certificate requests: omitting the attributes field even
though it is not OPTIONAL.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Don't dereference |d| when |top| is zero. Also test that various BIGNUM methods behave correctly on zero/even inputs.
Follow-up to b11980d79a
Reviewed-by: Rich Salz <rsalz@openssl.org>
This file, when copied to .dir-locals.el in the OpenSSL source top,
will make sure that the CC mode style "OpenSSL-II" will be used for
all C files.
Additionally, I makes sure that tabs are never used as indentation
character, regardless of the emacs mode, and that the fill column is
78.
Reviewed-by: Rich Salz <rsalz@openssl.org>
BN_bntest_rand generates a single-word zero BIGNUM with quite a large probability.
A zero BIGNUM in turn will end up having a NULL |d|-buffer, which we shouldn't dereference without checking.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Fix more potential leaks in X509_verify_cert()
Fix memory leak in ClientHello test
Fix memory leak in gost2814789 test
Fix potential memory leak in PKCS7_verify()
Fix potential memory leaks in X509_add1_reject_object()
Refactor to use "goto err" in cleanup.
Signed-off-by: Rich Salz <rsalz@akamai.com>
Reviewed-by: Emilia Käsper <emilia@openssl.org>
If the seed value for dsa key generation is too short (< qsize),
return an error. Also update the documentation.
Signed-off-by: Rich Salz <rsalz@akamai.com>
Reviewed-by: Emilia Käsper <emilia@openssl.org>
Make all mention of digest algorithm use "any supported algorithm"
RT2071, some new manpages from Victor B. Wagner <vitus@cryptocom.ru>:
X509_LOOKUP_hash_dir.pod
X509_check_ca.pod
X509_check_issued.pod
RT 1600:
Remove references to non-existant objects(3)
Add RETURN VALUES to BIO_do_accept page.
RT1818:
RSA_sign Can return values other than 0 on failure.
RT3634:
Fix AES CBC aliases (Steffen Nurpmeso <sdaoden@yandex.com>)
RT3678:
Some clarifications to BIO_new_pair
(Devchandra L Meetei <dlmeetei@gmail.com>)
RT3787:
Fix some EVP_ function return values
(Laetitia Baudoin <lbaudoin@google.com>)
Reviewed-by: Tim Hudson <tjh@openssl.org>
The PACKET should hold a 'const unsigned char*' underneath as well
but the legacy code passes the record buffer around as 'unsigned char*'
(to callbacks, too) so that's a bigger refactor.
Reviewed-by: Matt Caswell <matt@openssl.org>
Previously TLSProxy would detect a successful handshake once it saw the
server Finished message. This causes problems with abbreviated handshakes,
or if the client fails to process a message from the last server flight.
This change additionally sends some application data and finishes when the
client sends a CloseNotify.
Reviewed-by: Tim Hudson <tjh@openssl.org>
A DTLS client will abort a handshake if the server attempts to renew the
session ticket. This is caused by a state machine discrepancy between DTLS
and TLS discovered during the state machine rewrite work.
The bug can be demonstrated as follows:
Start a DTLS s_server instance:
openssl s_server -dtls
Start a client and obtain a session but no ticket:
openssl s_client -dtls -sess_out session.pem -no_ticket
Now start a client reusing the session, but allow a ticket:
openssl s_client -dtls -sess_in session.pem
The client will abort the handshake.
Reviewed-by: Tim Hudson <tjh@openssl.org>
Add DSA tests.
Add tests to verify signatures against public keys. This will also check
that a public key is read in correctly.
Reviewed-by: Ben Laurie <ben@openssl.org>
L<foo|foo> is sub-optimal If the xref is the same as the title,
which is what we do, then you only need L<foo>. This fixes all
1457 occurrences in 349 files. Approximately. (And pod used to
need both.)
Reviewed-by: Richard Levitte <levitte@openssl.org>
Commit 9ceb2426b0 (PACKETise ClientHello) broke session tickets by failing
to detect the session ticket extension in an incoming ClientHello. This
commit fixes the bug.
Reviewed-by: Emilia Käsper <emilia@openssl.org>
- select an actual file handle for devnull
- do not declare $msgdata twice
- SKE records sometimes seem to come without sig
- in SKE parsing, use and use $pub_key_len when parsing $pub_key
Reviewed-by: Matt Caswell <matt@openssl.org>
Enhance the PACKET code readability, and fix a stale comment. Thanks
to Ben Kaduk (bkaduk@akamai.com) for pointing this out.
Reviewed-by: Emilia Käsper <emilia@openssl.org>
This was obsolete in 2001. This is not the same as Gost94 digest.
Thanks to Dmitry Belyavsky <beldmit@gmail.com> for review and advice.
Reviewed-by: Matt Caswell <matt@openssl.org>
When config'd with "sctp" running "make test" causes a seg fault. This is
actually due to the way ssltest works - it dives under the covers and frees
up BIOs manually and so some BIOs are NULL when the SCTP code does not
expect it. The simplest fix is just to add some sanity checks to make sure
the BIOs aren't NULL before we use them.
This problem occurs in master and 1.0.2. The fix has also been applied to
1.0.1 to keep the code in sync.
Reviewed-by: Tim Hudson <tjh@openssl.org>
There are some missing return value checks in the SCTP code. In master this
was causing a compilation failure when config'd with
"--strict-warnings sctp".
Reviewed-by: Tim Hudson <tjh@openssl.org>
Use a dynamic engine for ossltest engine so that we can build it without
subsequently deploying it during install. We do not want people accidentally
using this engine.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
Add ServerHello parsing to TLSProxy.
Also add some (very) limited ServerKeyExchange parsing.
Add the capability to set client and server cipher lists
Fix a bug with fragment lengths
Reviewed-by: Richard Levitte <levitte@openssl.org>
Two tests are added: one is a simple version tolerance test; the second is
a test to ensure that OpenSSL operates correctly in the case of a zero
length extensions block. The latter was broken inadvertently (now fixed)
and it would have been helpful to have a test case for it.
Reviewed-by: Richard Levitte <levitte@openssl.org>
This commit provides a set of perl modules that support the testing of
libssl. The test harness operates as a man-in-the-middle proxy between
s_server and s_client. Both s_server and s_client must be started using the
"-testmode" option which loads the new OSSLTEST engine.
The test harness enables scripts to be written that can examine the packets
sent during a handshake, as well as (potentially) modifying them so that
otherwise illegal handshake messages can be sent.
Reviewed-by: Richard Levitte <levitte@openssl.org>
This engine is for testing purposes only. It provides crippled crypto
implementations and therefore must not be used in any instance where
security is required.
This will be used by the forthcoming libssl test harness which will operate
as a man-in-the-middle proxy. The test harness will be able to modify
TLS packets and read their contents. By using this test engine packets are
not encrypted and MAC codes always verify.
Reviewed-by: Richard Levitte <levitte@openssl.org>
The function BN_MONT_CTX_set was assuming that the modulus was non-zero
and therefore that |mod->top| > 0. In an error situation that may not be
the case and could cause a seg fault.
This is a follow on from CVE-2015-1794.
Reviewed-by: Richard Levitte <levitte@openssl.org>
If a client receives a ServerKeyExchange for an anon DH ciphersuite with the
value of p set to 0 then a seg fault can occur. This commits adds a test to
reject p, g and pub key parameters that have a 0 value (in accordance with
RFC 5246)
The security vulnerability only affects master and 1.0.2, but the fix is
additionally applied to 1.0.1 for additional confidence.
CVE-2015-1794
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
make errors wants things in a different order to the way things are
currently defined in the header files. The easiest fix is to just let it
reorder it.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Add Host Header in OCSP query if no host header is set via -header
Signed-off-by: Rich Salz <rsalz@akamai.com>
Reviewed-by: Ben Laurie <ben@openssl.org>
We could just initialize it, but to be consistent with the rest of the file
it seemed to make more sense to just drop.
Reviewed-by: Ben Laurie <ben@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
This reverts commit 704563f04a.
Reverting in favour of the next commit which removes the underlying cause
of the warning.
Reviewed-by: Ben Laurie <ben@openssl.org>
--strict-warnings started showing warnings for this today...
Surely an error should be raised if these reads fail?
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
The -use_srtp s_client/s_server option is supposed to take a colon
separated string as an argument. In master this was incorrectly set to
expect a filename.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Some of the PACKET functions were returning incorrect data. An unfortunate
choice of test data in the unit test was masking the failure.
Reviewed-by: Tim Hudson <tjh@openssl.org>
EC_KEY_set_public_key_affine_coordinates was using some variables that only
apply if OPENSSL_NO_EC2M is not defined.
Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
The move of CCS into the state machine introduced a bug in ssl3_read_bytes.
The value of |recvd_type| was not being set if we are satisfying the request
from handshake fragment storage. This can occur, for example, with
renegotiation and causes the handshake to fail.
Reviewed-by: Tim Hudson <tjh@openssl.org>
Continuing on from the previous commit this moves the processing of DTLS
CCS messages out of the record layer and into the state machine.
Reviewed-by: Tim Hudson <tjh@openssl.org>
The handling of incoming CCS records is a little strange. Since CCS is not
a handshake message it is handled differently to normal handshake messages.
Unfortunately whilst technically it is not a handhshake message the reality
is that it must be processed in accordance with the state of the handshake.
Currently CCS records are processed entirely within the record layer. In
order to ensure that it is handled in accordance with the handshake state
a flag is used to indicate that it is an acceptable time to receive a CCS.
Previously this flag did not exist (see CVE-2014-0224), but the flag should
only really be considered a workaround for the problem that CCS is not
visible to the state machine.
Outgoing CCS messages are already handled within the state machine.
This patch makes CCS visible to the TLS state machine. A separate commit
will handle DTLS.
Reviewed-by: Tim Hudson <tjh@openssl.org>
Provide more robust (inline) functions to replace n2s, n2l, etc. These
functions do the same thing as the previous macros, but also keep track
of the amount of data remaining and return an error if we try to read more
data than we've got.
Reviewed-by: Tim Hudson <tjh@openssl.org>
Commit e481f9b90b removed OPENSSL_NO_TLSEXT from the code.
Previously if OPENSSL_NO_TLSEXT *was not* defined then the server random was
filled during getting of the ClientHello. If it *was* defined then the
server random would be filled in ssl3_send_server_hello(). Unfortunately in
commit e481f9b90b the OPENSSL_NO_TLSEXT guards were removed but *both*
server random fillings were left in. This could cause problems for session
ticket callbacks.
Reviewed-by: Stephen Henson <steve@openssl.org>
Thanks folks:
348 Benjamin Kaduk
317 Christian Brueffer
254 Erik Tews
253 Erik Tews
219 Carl Mehner
155 (ghost)
95 mancha
51 DominikNeubauer
Reviewed-by: Dr. Stephen Henson <steve@openssl.org>
Move PSK premaster secret algorithm to ssl_generate_master secret so
existing key exchange code can be used and modified slightly to add
the PSK wrapping structure.
Reviewed-by: Matt Caswell <matt@openssl.org>
Add support for RSAPSK, DHEPSK and ECDHEPSK server side.
Update various checks to ensure certificate and server key exchange messages
are only sent when required.
Update message handling. PSK server key exchange parsing now include an
identity hint prefix for all PSK server key exchange messages. PSK
client key exchange message expects PSK identity and requests key for
all PSK key exchange ciphersuites.
Update flags for RSA, DH and ECDH so they are also used in PSK.
Reviewed-by: Matt Caswell <matt@openssl.org>
Add support for RSAPSK, DHEPSK and ECDHEPSK client side.
Update various checks to ensure certificate and server key exchange messages
are only expected when required.
Update message handling. PSK server key exchange parsing now expects an
identity hint prefix for all PSK server key exchange messages. PSK
client key exchange message requests PSK identity and key for all PSK
key exchange ciphersuites and includes identity in message.
Update flags for RSA, DH and ECDH so they are also used in PSK.
Reviewed-by: Matt Caswell <matt@openssl.org>
The DTLS code is supposed to drop packets if we try to write them out but
the underlying BIO write buffers are full. ssl3_write_pending() contains
an incorrect test for DTLS that controls this. The test only checks for
DTLS1 so DTLS1.2 does not correctly clear the internal OpenSSL buffer which
can later cause an assert to be hit. This commit changes the test to cover
all DTLS versions.
RT#3967
Reviewed-by: Tim Hudson <tjh@openssl.org>
The function SSL_set_session_ticket_ext sets the ticket data to be sent in
the ClientHello. This is useful for EAP-FAST. This commit adds a test to
ensure that when this function is called the expected ticket data actually
appears in the ClientHello.
Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
This flag was not set anywhere within the codebase (only read). It could
only be set by an app reaching directly into s->s3->flags and setting it
directly. However that method became impossible when libssl was opaquified.
Even in 1.0.2/1.0.1 if an app set the flag directly it is only relevant to
ssl3_connect(), which calls SSL_clear() during initialisation that clears
any flag settings. Therefore it could take effect if the app set the flag
after the handshake has started but before it completed. It seems quite
unlikely that any apps really do this (especially as it is completely
undocumented).
The purpose of the flag is suppress flushing of the write bio on the client
side at the end of the handshake after the client has written the Finished
message whilst resuming a session. This enables the client to send
application data as part of the same flight as the Finished message.
This flag also controls the setting of a second flag SSL3_FLAGS_POP_BUFFER.
There is an interesting comment in the code about this second flag in the
implementation of ssl3_write:
/* This is an experimental flag that sends the
* last handshake message in the same packet as the first
* use data - used to see if it helps the TCP protocol during
* session-id reuse */
It seems the experiment did not work because as far as I can tell nothing
is using this code. The above comment has been in the code since SSLeay.
This commit removes support for SSL3_FLAGS_DELAY_CLIENT_FINISHED, as well
as the associated SSL3_FLAGS_POP_BUFFER.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Create bn_free_d utility routine and use it.
Fix RT3950
Also a missing cleanse, from Loganaden Velvindron (loganaden@gmail.com),
who noticed it in a Cloudflare patch.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Add support for loading verify and chain stores in SSL_CONF.
Commands to set verify mode and client CA names.
Add documentation.
Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
Removed ability to set ex_data impl at runtime. This removed these
three functions:
const CRYPTO_EX_DATA_IMPL *CRYPTO_get_ex_data_implementation(void);
int CRYPTO_set_ex_data_implementation(const CRYPTO_EX_DATA_IMPL *i);
int CRYPTO_ex_data_new_class(void);
It is no longer possible to change the ex_data implementation at
runtime. (Luckily those functions were never documented :)
Also removed the ability to add new exdata "classes." We don't believe
this received much (if any) use, since you can't add it to OpenSSL objects,
and there are probably better (native) methods for developers to add
their own extensible data, if they really need that.
Replaced the internal hash table (of per-"class" stacks) with a simple
indexed array. Reserved an index for "app" application.
Each API used to take the lock twice; now it only locks once.
Use local stack storage for function pointers, rather than malloc,
if possible (i.e., number of ex_data items is under a dozen).
Make CRYPTO_EX_DATA_FUNCS opaque/internal.
Also fixes RT3710; index zero is reserved.
Reviewed-by: Richard Levitte <levitte@openssl.org>
This leaves behind files with names ending with '.iso-8859-1'. These
should be safe to remove. If something went wrong when re-encoding,
there will be some files with names ending with '.utf8' left behind.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Instead of piping through tardy, and possibly suffering from bugs in certain
versions, use --transform, --owner and --group directly with GNU tar (we
already expect that tar variant).
Reviewed-by: Rich Salz <rsalz@openssl.org>
The -show_chain flag to the verify command line app shows information about
the chain that has been built. This commit adds the text "untrusted" against
those certificates that have been used from the untrusted list.
Reviewed-by: Rich Salz <rsalz@openssl.org>
The function X509_verify_cert checks the value of |ctx->chain| at the
beginning, and if it is NULL then it initialises it, along with the value
of ctx->untrusted. The normal way to use X509_verify_cert() is to first
call X509_STORE_CTX_init(); then set up various parameters etc; then call
X509_verify_cert(); then check the results; and finally call
X509_STORE_CTX_cleanup(). The initial call to X509_STORE_CTX_init() sets
|ctx->chain| to NULL. The only place in the OpenSSL codebase where
|ctx->chain| is set to anything other than a non NULL value is in
X509_verify_cert itself. Therefore the only ways that |ctx->chain| could be
non NULL on entry to X509_verify_cert is if one of the following occurs:
1) An application calls X509_verify_cert() twice without re-initialising
in between.
2) An application reaches inside the X509_STORE_CTX structure and changes
the value of |ctx->chain| directly.
With regards to the second of these, we should discount this - it should
not be supported to allow this.
With regards to the first of these, the documentation is not exactly
crystal clear, but the implication is that you must call
X509_STORE_CTX_init() before each call to X509_verify_cert(). If you fail
to do this then, at best, the results would be undefined.
Calling X509_verify_cert() with |ctx->chain| set to a non NULL value is
likely to have unexpected results, and could be dangerous. This commit
changes the behaviour of X509_verify_cert() so that it causes an error if
|ctx->chain| is anything other than NULL (because this indicates that we
have not been initialised properly). It also clarifies the associated
documentation. This is a follow up commit to CVE-2015-1793.
Reviewed-by: Stephen Henson <steve@openssl.org>
This adds a test for CVE-2015-1793. This adds a new test file
verify_extra_test.c, which could form the basis for additional
verification tests.
Reviewed-by: Stephen Henson <steve@openssl.org>
During certificate verfification, OpenSSL will attempt to find an
alternative certificate chain if the first attempt to build such a chain
fails. An error in the implementation of this logic can mean that an
attacker could cause certain checks on untrusted certificates to be
bypassed, such as the CA flag, enabling them to use a valid leaf
certificate to act as a CA and "issue" an invalid certificate.
This occurs where at least one cert is added to the first chain from the
trust store, but that chain still ends up being untrusted. In that case
ctx->last_untrusted is decremented in error.
Patch provided by the BoringSSL project.
CVE-2015-1793
Reviewed-by: Stephen Henson <steve@openssl.org>
There's no reason why we should default to a output format that is
old, and confusing in some cases.
This affects the commands "ca", "crl", "req" and "x509".
Reviewed-by: Rich Salz <rsalz@openssl.org>
In CCM mode don't require a tag before initialising decrypt: this allows
the tag length to be set without requiring the tag.
Reviewed-by: Rich Salz <rsalz@openssl.org>
The PSK identity hint should be stored in the SSL_SESSION structure
and not in the parent context (which will overwrite values used
by other SSL structures with the same SSL_CTX).
Reviewed-by: Matt Caswell <matt@openssl.org>
We always free the handshake buffer when digests are freed so move
it into ssl_free_digest_list()
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
Rewrite ssl3_digest_cached_records handling. Only digest cached records
if digest array is NULL: this means it is safe to call
ssl3_digest_cached_records multiple times (subsequent calls are no op).
Remove flag TLS1_FLAGS_KEEP_HANDSHAKE instead only update handshake buffer
if digest array is NULL.
Add additional "keep" parameter to ssl3_digest_cached_records to indicate
if the handshake buffer should be retained after digesting cached records
(needed for TLS 1.2 client authentication).
Reviewed-by: Matt Caswell <matt@openssl.org>
Add secure heap for storage of private keys (when possible).
Add BIO_s_secmem(), CBIGNUM, etc.
Add BIO_CTX_secure_new so all BIGNUM's in the context are secure.
Contributed by Akamai Technologies under the Corporate CLA.
Reviewed-by: Richard Levitte <levitte@openssl.org>
A small rearrangement so the inclusion of rsaz_exp.h would be
unconditional, but what that header defines becomes conditional.
This solves the weirdness where rsaz_exp.h gets in and out of the
dependency list for bn_exp.c, depending on the present architecture.
Reviewed-by: Rich Salz <rsalz@openssl.org>
If RSA or DSA is disabled we will never use a ciphersuite with
RSA/DSA authentication as it is already filtered out by the cipher
list logic.
Reviewed-by: Richard Levitte <levitte@openssl.org>
As numerous comments indicate the certificate and key array is not an
appopriate structure to store the peers certificate: so remove it and
just the s->session->peer instead.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Since [sc]_ssl->[rw]bio aren't available, do not try to fiddle with
them. Surely, a BIO_free on the "main" BIOs should be enough
Reviewed-by: Rich Salz <rsalz@openssl.org>
Construct bio_err and bio_stdout from file handles instead of FILE
pointers, since the latter might not be implemented (when OPENSSL_NO_STDIO
is defined).
Convert all output to use BIO_printf.
Change lh_foo to lh_SSL_SESSION_foo.
Reviewed-by: Rich Salz <rsalz@openssl.org>
This reverts commit d480e182fe.
Commit broke TLS handshakes due to fragility of digest caching: that will be
fixed separately.
Reviewed-by: Rich Salz <rsalz@openssl.org>
When generating a private key, try to make the output file be readable
only by the owner. Put it in CHANGES file since it might be noticeable.
Add "int private" flag to apps that write private keys, and check that it's
set whenever we do write a private key. Checked via assert so that this
bug (security-related) gets fixed. Thanks to Viktor for help in tracing
the code-paths where private keys are written.
Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
While closing RT3588 (Remove obsolete comment) Kurt and I saw that a
few lines to completely clear the SSL cipher state could be moved into
a common function.
Reviewed-by: Kurt Roeckx <kurt@openssl.org>
It is valid for an extension block to be present in a ClientHello, but to
be of zero length.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
Recent HMAC changes broke ABI compatibility due to a new field in HMAC_CTX.
This backs that change out, and does it a different way.
Thanks to Timo Teras for the concept.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Also tighten X509_cmp_time to reject more than three fractional
seconds in the time; and to reject trailing garbage after the offset.
CVE-2015-1789
Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Fix error handling in ssl_session_dup, as well as incorrect setting up of
the session ticket. Follow on from CVE-2015-1791.
Thanks to LibreSSL project for reporting these issues.
Reviewed-by: Tim Hudson <tjh@openssl.org>
It should not be possible for DTLS message fragments to span multiple
packets. However previously if the message header fitted exactly into one
packet, and the fragment body was in the next packet then this would work.
Obviously this would fail if packets get re-ordered mid-flight.
Reviewed-by: Tim Hudson <tjh@openssl.org>
The underlying field returned by RECORD_LAYER_get_rrec_length() is an
unsigned int. The return type of the function should match that.
Reviewed-by: Tim Hudson <tjh@openssl.org>
In the event of an error in the HMAC function, leaks can occur because the
HMAC_CTX does not get cleaned up.
Thanks to the BoringSSL project for reporting this issue.
Reviewed-by: Richard Levitte <levitte@openssl.org>
The function EC_POINT_is_on_curve does not return a boolean value.
It returns 1 if the point is on the curve, 0 if it is not, and -1
on error. Many usages within OpenSSL were incorrectly using this
function and therefore not correctly handling error conditions.
With thanks to the Open Crypto Audit Project for reporting this issue.
Reviewed-by: Kurt Roeckx <kurt@openssl.org>
The return type of BIO_number_read() and BIO_number_written() as well as
the corresponding num_read and num_write members in the BIO structure has
been changed from unsigned long to uint64_t. On platforms where an unsigned
long is 32 bits (e.g. Windows) these counters could overflow if >4Gb is
transferred.
With thanks to the Open Crypto Audit Project for reporting this issue.
Reviewed-by: Richard Levitte <levitte@openssl.org>
This adds additional checks to the processing of extensions in a ClientHello
to ensure that either no extensions are present, or if they are then they
take up the exact amount of space expected.
With thanks to the Open Crypto Audit Project for reporting this issue.
Reviewed-by: Stephen Henson <steve@openssl.org>
This fixes a memory leak that can occur whilst duplicating a BIO chain if
the call to CRYPTO_dup_ex_data() fails. It also fixes a second memory leak
where if a failure occurs after successfully creating the first BIO in the
chain, then the beginning of the new chain was not freed.
With thanks to the Open Crypto Audit Project for reporting this issue.
Reviewed-by: Stephen Henson <steve@openssl.org>
BUF_MEM_free() attempts to cleanse memory using memset immediately prior
to a free. This is at risk of being optimised away by the compiler, so
replace with a call to OPENSSL_clear_free() instead.
With thanks to the Open Crypto Audit Project for reporting this issue.
Reviewed-by: Stephen Henson <steve@openssl.org>
For librypto to be complete, the stuff in both crypto/ and engines/
have to be built. Doing 'make test' or 'make apps' from a clean
source tree failed to do so.
Corrected by using the new 'build_libcrypto' in the top Makefile.
Reviewed-by: Tim Hudson <tjh@openssl.org>
There's a need for a target that will build all of libcrypto, so let's
add 'build_libcrypto' that does this. For ortogonality, let's also
add 'build_libssl'. Have both also depend on 'libcrypto.pc' and
'libssl.pc' so those get built together with the libraries.
This makes 'all' depend on fewer things directly.
Reviewed-by: Tim Hudson <tjh@openssl.org>
Check return value when calling ASN1_INTEGER_get to retrieve a certificate
serial number. If an error occurs (which will be caused by the value being
out of range) revert to hex dump of serial number.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Remove a comment that suggested further clean up was required.
DH_free() performs the necessary cleanup.
With thanks to the Open Crypto Audit Project for reporting this issue.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Ensure OPENSSL_cleanse() is called on the premaster secret value calculated for GOST.
With thanks to the Open Crypto Audit Project for reporting this issue.
Reviewed-by: Rich Salz <rsalz@openssl.org>
A BIGNUM can have the value of -0. The function BN_bn2hex fails to account
for this and can allocate a buffer one byte too short in the event of -0
being used, leading to a one byte buffer overrun. All usage within the
OpenSSL library is considered safe. Any security risk is considered
negligible.
With thanks to Mateusz Kocielski (LogicalTrust), Marek Kroemeke and
Filip Palian for discovering and reporting this issue.
Reviewed-by: Tim Hudson <tjh@openssl.org>
The session object on the client side is initially created during
construction of the ClientHello. If the client is DTLS1.2 capable then it
will store 1.2 as the version for the session. However if the server is only
DTLS1.0 capable then when the ServerHello comes back the client switches to
using DTLS1.0 from then on. However the session version does not get
updated. Therefore when the client attempts to resume that session the
server throws an alert because of an incorrect protocol version.
Reviewed-by: Tim Hudson <tjh@openssl.org>
objects.pl only looked for a space to see if the name could be
used as a C identifier. Improve the test to match the real C
rules.
Signed-off-by: Rich Salz <rsalz@akamai.com>
Reviewed-by: Matt Caswell <matt@openssl.org>
Here are the "rules" for handling flags that depend on #ifdef:
- Do not ifdef the enum. Only ifdef the OPTIONS table. All ifdef'd
entries appear at the end; by convention "engine" is last. This
ensures that at run-time, the flag will never be recognized/allowed.
The next two bullets entries are for silencing compiler warnings:
- In the while/switch parsing statement, use #ifdef for the body to
disable it; leave the "case OPT_xxx:" and "break" statements outside
the ifdef/ifndef. See ciphers.c for example.
- If there are multiple options controlled by a single guard, OPT_FOO,
OPT_BAR, etc., put a an #ifdef around the set, and then do "#else"
and a series of case labels and a break. See OPENSSL_NO_AES in cms.c
for example.
Reviewed-by: Matt Caswell <matt@openssl.org>
The code in bss_dgram.c checks if IP_MTUDISCOVER is defined, where it
should test for IP_MTU_DISCOVER
RT#3888
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
If a NewSessionTicket is received by a multi-threaded client when
attempting to reuse a previous ticket then a race condition can occur
potentially leading to a double free of the ticket data.
CVE-2015-1791
This also fixes RT#3808 where a session ID is changed for a session already
in the client session cache. Since the session ID is the key to the cache
this breaks the cache access.
Parts of this patch were inspired by this Akamai change:
c0bf69a791
Reviewed-by: Rich Salz <rsalz@openssl.org>
dtls1_get_message has an |mt| variable which is the type of the message that
is being requested. If it is negative then any message type is allowed.
However the value of |mt| is not checked in one of the main code paths, so a
peer can send a message of a completely different type and it will be
processed as if it was the message type that we were expecting. This has
very little practical consequences because the current behaviour will still
fail when the format of the message isn't as expected.
Reviewed-by: Andy Polyakov <appro@openssl.org>
Where we called openssl_cleanse, make sure we do it on all error
paths. Be consistent in use of sizeof(foo) when possible.
Reviewed-by: Andy Polyakov <appro@openssl.org>
Almost two months ago, the warning about non-existing config file was
supressed by setting the environment variable OPENSSL_CONF to /dev/null
everywhere. Now that this warning is gone, that practice is no longer
needed.
Reviewed-by: Stephen Henson <steve@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
The module loading feature got broken a while ago, so restore it, but
have it a bit more explicit this time around.
Reviewed-by: Stephen Henson <steve@openssl.org>
Create app_load_config(), a routine to load config file. Remove the
"always load config" from the main app. Change the places that used to
load config to call the new common routine.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Using an enum with -Wswitch means all lookup routines handle
all cases. Remove X509_LU_PKEY which was never used.
Reviewed-by: Richard Levitte <levitte@openssl.org>
The new accessors SSL_get_client_random, SSL_get_server_random and
SSL_SESSION_get_master_key should return a size_t to match the type of the
|outlen| parameter.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Change the new SSL_get_client_random(), SSL_get_server_random() and
SSL_SESSION_get_master_key() functions to use size_t for |outlen| instead of
int.
Reviewed-by: Tim Hudson <tjh@openssl.org>
Tor uses these values to implement a low-rent clone of RFC 5705 (which,
in our defense, we came up with before RFC 5705 existed). But now that
ssl_st is opaque, we need another way to get at them.
Includes documentation, with suitable warnings about not actually
using these functions.
Signed-off-by: Nick Mathewson <nickm@torproject.org>
Signed-off-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Tim Hudson <tjh@openssl.org>
On the server side, if you want to know which ciphers the client
offered, you had to use session->ciphers. But that field is no
longer visible, so we need a method to get at it.
Signed-off-by: Nick Mathewson <nickm@torproject.org>
Signed-off-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Tim Hudson <tjh@openssl.org>
In master, the 'dh' command is gone, so use 'dhparam' instead to
determine if we're compiled with DH.
Also, set "@SECLEVEL=1" for the weak DH test, so that it actually
passes.
Reviewed-by: Dr Stephen Henson <steve@openssl.org>
Add support for PKCS#8 private key encryption using the scrypt algorithm
in the pkcs8 utility. Update documentation.
Reviewed-by: Rich Salz <rsalz@openssl.org>
This adds a new function which will encrypt a private key using PKCS#8
based on an X509_ALGOR structure and reimplements PKCS8_encrypt to use it.
Update pkcs8 utlity to use PKCS8_set0_pbe.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Also add more ciphersuite test coverage, and a negative test for
512-bit DHE.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(cherry picked from commit 1ee85aab75)
The size of the SRP extension can never be negative (the variable
|size| is unsigned). Therefore don't check if it is less than zero.
RT#3862
Reviewed-by: Richard Levitte <levitte@openssl.org>
The return value of i2d functions can be negative if an error occurs.
Therefore don't assign the return value to an unsigned type and *then*
check if it is negative.
RT#3862
Reviewed-by: Richard Levitte <levitte@openssl.org>
The members of struct timeval on OpenVMS are unsigned. The logic for
calculating timeouts needs adjusting to deal with this.
RT#3862
Reviewed-by: Richard Levitte <levitte@openssl.org>
The "out" variable is used for both key and csr. Close it after
writing the first one so it can be re-used when writing the other.
Signed-off-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Tim Hudson <tjh@openssl.org>
If the record received is for a version that we don't support, previously we
were sending an alert back. However if the incoming record already looks
like an alert then probably we shouldn't do that. So suppress an outgoing
alert if it looks like we've got one incoming.
Reviewed-by: Kurt Roeckx <kurt@openssl.org>
Version negotiation was broken (one of the late changes in the review
process broke it). The problem is that TLS clients do not set first_packet,
whereas TLS/DTLS servers and DTLS clients do. The simple fix is to set
first_packet for TLS clients too.
Reviewed-by: Kurt Roeckx <kurt@openssl.org>
bn_get_bits5 was overstepping array boundary by 1 byte. It was exclusively
read overstep and data could not have been used. The only potential problem
would be if array happens to end on the very edge of last accesible page.
Reviewed-by: Richard Levitte <levitte@openssl.org>
The update: target in engines/ didn't recurse into engines/ccgost.
The update: and depend: targets in engines/ccgost needed a fixup.
Reviewed-by: Rich Salz <rsalz@openssl.org>
The certificate masks are used to select which ciphersuite we are going to
use. The variables |emask_k| and |emask_a| relate to export grade key
exchange and authentication respecitively. The variables |mask_k| and
|mask_a| are the equivalent versions for non-export grade. This fixes an
instance where the two usages of export/non-export were mixed up. In
practice it makes little difference since it still works!
Reviewed-by: Richard Levitte <levitte@openssl.org>
Remove support for the two export grade static DH ciphersuites. These two
ciphersuites were newly added (along with a number of other static DH
ciphersuites) to 1.0.2. However the two export ones have *never* worked
since they were introduced. It seems strange in any case to be adding new
export ciphersuites, and given "logjam" it also does not seem correct to
fix them.
Reviewed-by: Richard Levitte <levitte@openssl.org>
If BN_rand is called with |bits| set to 1 and |top| set to 1 then a 1 byte
buffer overflow can occur. There are no such instances within the OpenSSL at
the moment.
Thanks to Mateusz Kocielski (LogicalTrust), Marek Kroemeke, Filip Palian for
discovering and reporting this issue.
Reviewed-by: Kurt Roeckx <kurt@openssl.org>
The functions BN_rshift and BN_lshift shift their arguments to the right or
left by a specified number of bits. Unpredicatable results (including
crashes) can occur if a negative number is supplied for the shift value.
Thanks to Mateusz Kocielski (LogicalTrust), Marek Kroemeke and Filip Palian
for discovering and reporting this issue.
Reviewed-by: Kurt Roeckx <kurt@openssl.org>
Given the pervasive nature of TLS extensions it is inadvisable to run
OpenSSL without support for them. It also means that maintaining
the OPENSSL_NO_TLSEXT option within the code is very invasive (and probably
not well tested). Therefore it is being removed.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
We had updates of certain header files in both Makefile.org and the
Makefile in the directory the header file lived in. This is error
prone and also sometimes generates slightly different results (usually
just a comment that differs) depending on which way the update was
done.
This removes the file update targets from the top level Makefile, adds
an update: target in all Makefiles and has it depend on the depend: or
local_depend: targets, whichever is appropriate, so we don't get a
double run through the whole file tree.
Reviewed-by: Rich Salz <rsalz@openssl.org>
There are a number of files that are created on other branches that are
not held in git and are not needed in master. When checking out master
after working on another branch these files show up in "git status", so
just add them to .gitignore
Reviewed-by: Richard Levitte <levitte@openssl.org>
If a client receives a bad hello request in DTLS then the alert is not
sent correctly.
RT#2801
Signed-off-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Kurt Roeckx <kurt@openssl.org>
The function RECORD_LAYER_clear() is supposed to clear the contents of the
RECORD_LAYER structure, but retain certain data such as buffers that are
allocated. Unfortunately one buffer (for compression) got missed and was
inadvertently being wiped, thus causing a memory leak.
In part this is due to the fact that RECORD_LAYER_clear() was reaching
inside SSL3_BUFFERs and SSL3_RECORDs, which it really shouldn't. So, I've
rewritten it to only clear the data it knows about, and to defer clearing
of SSL3_RECORD and SSL3_BUFFER structures to SSL_RECORD_clear() and the
new function SSL3_BUFFER_clear().
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
This adds support for the ASN.1 structures in draft-josefsson-scrypt-kdf-03
Private keys encrypted by scrypt can now be decrypted transparently as long
as they don't exceed the memory limits.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Typedef STRINT_PAIR to be the same as OPT_PAIR, and use that structure and
a bunch of tables instead of switch statements to lookup various values
out of the SSL/TLS message buffers. Shrinks a bunch of code.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Also reorder preferences to prefer prime curves to binary curves, and P-256 to everything else.
The result:
$ openssl s_server -named_curves "auto"
This command will negotiate an ECDHE ciphersuite with P-256:
$ openssl s_client
This command will negotiate P-384:
$ openssl s_client -curves "P-384"
This command will not negotiate ECDHE because P-224 is disabled with "auto":
$ openssl s_client -curves "P-224"
Reviewed-by: Kurt Roeckx <kurt@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
- Do not advise generation of DH parameters with dsaparam to save
computation time.
- Promote use of custom parameters more, and explicitly forbid use of
built-in parameters weaker than 2048 bits.
- Advise the callback to ignore <keylength> - it is currently called
with 1024 bits, but this value can and should be safely ignored by
servers.
Reviewed-by: Rich Salz <rsalz@openssl.org>
The default bitlength is now 2048. Also clarify that either the number
of bits or the generator must be present:
$ openssl dhparam -2
and
$ openssl dhparam 2048
generate parameters but
$ openssl dhparam
does not.
Reviewed-by: Matt Caswell <matt@openssl.org>
BLKINIT optimization worked on T4, but for some reason appears "too
aggressive" for T3 triggering intermiitent EC failures. It's not clear
why only EC is affected...
Reviewed-by: Tim Hudson <tjh@openssl.org>
Move per-connection state out of the CERT structure: which should just be
for shared configuration data (e.g. certificates to use).
In particular move temporary premaster secret, raw ciphers, peer signature
algorithms and shared signature algorithms.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Rewrite and tidy ASN1_INTEGER and ASN1_ENUMERATED handling.
Remove code duplication.
New functions to convert between int64_t and ASN.1 types without the
quirks of the old long conversion functions.
Add documentation.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Move these functions into t1_clnt.c, t1_srvr.c and t1_meth.c and take
advantage of the existing tls1_get*_method() functions that all the other
methods are using. Since these now have to support SSLv3 anyway we might
as well use the same set of get functions for both TLS and SSLv3.
Reviewed-by: Kurt Roeckx <kurt@openssl.org>
Following the version negotiation rewrite all of the previous code that was
dedicated to version negotiation can now be deleted - all six source files
of it!!
Reviewed-by: Kurt Roeckx <kurt@openssl.org>
Continuing from the previous commit this changes the way we do client side
version negotiation. Similarly all of the s23* "up front" state machine code
has been avoided and again things now work much the same way as they already
did for DTLS, i.e. we just do most of the work in the
ssl3_get_server_hello() function.
Reviewed-by: Kurt Roeckx <kurt@openssl.org>
This commit changes the way that we do server side protocol version
negotiation. Previously we had a whole set of code that had an "up front"
state machine dedicated to the negotiating the protocol version. This adds
significant complexity to the state machine. Historically the justification
for doing this was the support of SSLv2 which works quite differently to
SSLv3+. However, we have now removed support for SSLv2 so there is little
reason to maintain this complexity.
The one slight difficulty is that, although we no longer support SSLv2, we
do still support an SSLv3+ ClientHello in an SSLv2 backward compatible
ClientHello format. This is generally only used by legacy clients. This
commit adds support within the SSLv3 code for these legacy format
ClientHellos.
Server side version negotiation now works in much the same was as DTLS,
i.e. we introduce the concept of TLS_ANY_VERSION. If s->version is set to
that then when a ClientHello is received it will work out the most
appropriate version to respond with. Also, SSLv23_method and
SSLv23_server_method have been replaced with TLS_method and
TLS_server_method respectively. The old SSLv23* names still exist as
macros pointing at the new name, although they are deprecated.
Subsequent commits will look at client side version negotiation, as well of
removal of the old s23* code.
Reviewed-by: Kurt Roeckx <kurt@openssl.org>
Follow the same convention the other OPENSSL_NO_xxx header files
do, and use #error instead of making the header file be a no-op.
Reviewed-by: Matt Caswell <matt@openssl.org>
The move of headers from crypto/ to crypto/include/internal/ needs
this extra inclusion directory or the build fails.
Reviewed-by: Rich Salz <rsalz@openssl.org>
There are header files in crypto/ that are used by a number of crypto/
submodules. Move those to crypto/include/internal and adapt the
affected source code and Makefiles.
The header files that got moved are:
crypto/cryptolib.h
crypto/md32_common.h
Reviewed-by: Rich Salz <rsalz@openssl.org>
Added depencies on the public variants of some keys in test to Makefile.
Added the newly introduced key files from test/ in the list of files
to copy in util/pl/unix.pl.
Reviewed-by: Rich Salz <rsalz@openssl.org>
There are header files in crypto/ that are used by the rest of
OpenSSL. Move those to include/internal and adapt the affected source
code, Makefiles and scripts.
The header files that got moved are:
crypto/constant_time_locl.h
crypto/o_dir.h
crypto/o_str.h
Reviewed-by: Matt Caswell <matt@openssl.org>
Having the INTxx_MIN et al macros defined in a public header is
unnecessary and risky. Also, it wasn't done for all platforms that
might need it.
So we move those numbers to an internal header file, do the math
ourselves and make sure to account for the integer representations we
know of.
This introduces include/internal, which is unproblematic since we
already use -I$(TOP)/include everywhere. This directory is different
from crypto/include/internal, as the former is more general internal
headers for all of OpenSSL, while the latter is for libcrypto only.
Reviewed-by: Matt Caswell <matt@openssl.org>
Include appropriate headers for standard integer types in e_os2.h
This should use stdint.h, inttypes.h or a workaround for systems which
have neither.
Reviewed-by: Matt Caswell <matt@openssl.org>
If an EVP implementation (such as an engine) fails out early, it's
possible to call EVP_CIPHER_CTX_cleanup() which will call
ctx->cipher->cleanup() before the cipher_data has been initialized
via ctx->cipher->init(). Guarantee it's all-bytes-zero as soon as
it is allocated.
Reviewed-by: Matt Caswell <matt@openssl.org>
The function obj_cmp() (file crypto/objects/obj_dat.c) can in some
situations call memcmp() with a null pointer and a zero length.
This is invalid behaviour. When compiling openssl with undefined
behaviour sanitizer (add -fsanitize=undefined to compile flags) this
can be seen. One example that triggers this behaviour is the pkcs7
command (but there are others, e.g. I've seen it with the timestamp
function):
apps/openssl pkcs7 -in test/testp7.pem
What happens is that obj_cmp takes objects of the type ASN1_OBJECT and
passes their ->data pointer to memcmp. Zero-sized ASN1_OBJECT
structures can have a null pointer as data.
RT#3816
Signed-off-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
Following on from the removal of libcrypto and libssl support for Kerberos
this commit removes all remaining references to Kerberos.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Remove RFC2712 Kerberos support from libssl. This code and the associated
standard is no longer considered fit-for-purpose.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Remove Kerberos related options from the apps to prepare for the
subsequent commits which will remove libcrypto and libssl support for
Kerberos.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Currently we set change_cipher_spec_ok to 1 before calling
ssl3_get_cert_verify(). This is because this message is optional and if it
is not sent then the next thing we would expect to get is the CCS. However,
although it is optional, we do actually know whether we should be receiving
one in advance. If we have received a client cert then we should expect
a CertificateVerify message. By the time we get to this point we will
already have bombed out if we didn't get a Certificate when we should have
done, so it is safe just to check whether |peer| is NULL or not. If it is
we won't get a CertificateVerify, otherwise we will. Therefore we should
change the logic so that we only attempt to get the CertificateVerify if
we are expecting one, and not allow a CCS in this scenario.
Whilst this is good practice for TLS it is even more important for DTLS.
In DTLS messages can be lost. Therefore we may be in a situation where a
CertificateVerify message does not arrive even though one was sent. In that
case the next message the server will receive will be the CCS. This could
also happen if messages get re-ordered in-flight. In DTLS if
|change_cipher_spec_ok| is not set and a CCS is received it is ignored.
However if |change_cipher_spec_ok| *is* set then a CCS arrival will
immediately move the server into the next epoch. Any messages arriving for
the previous epoch will be ignored. This means that, in this scenario, the
handshake can never complete. The client will attempt to retransmit
missing messages, but the server will ignore them because they are the wrong
epoch. The server meanwhile will still be waiting for the CertificateVerify
which is never going to arrive.
RT#2958
Reviewed-by: Emilia Käsper <emilia@openssl.org>
Original 'sizeof(ADDED_OBJ)' was replaced with 'sizeof(*ao)'. However,
they return different sizes. Therefore as the result heap gets corrupted
and at some point later debug version of malloc() detects the corruption.
On x86 we can observe that as follows:
sizeof(*ao) == 4
sizeof(*ao[0]) == sizeof(ADDED_OBJ) == 8
Issue reproduces with either enabling CRT debug heap or Application
Verifier's full-page heap.
Basic debugging data from the moment the corruption is first detected:
0:000:x86> |
. 0 id: 283c create name: openssl.exe
0:000:x86> kcn
#
00 MSVCR120D!_heap_alloc_dbg_impl
01 MSVCR120D!_nh_malloc_dbg_impl
02 MSVCR120D!_nh_malloc_dbg
03 MSVCR120D!malloc
04 LIBEAY32!default_malloc_ex
05 LIBEAY32!CRYPTO_malloc
06 LIBEAY32!lh_insert
07 LIBEAY32!OBJ_add_object
08 LIBEAY32!OBJ_create
09 openssl!add_oid_section
0a openssl!req_main
0b openssl!do_cmd
0c openssl!main
0d openssl!__tmainCRTStartup
0e openssl!mainCRTStartup
0f KERNEL32!BaseThreadInitThunk
10 ntdll_77d60000!__RtlUserThreadStart
11 ntdll_77d60000!_RtlUserThreadStart
Signed-off-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Since COMP_METHOD is now defined in comp_lcl.h, it is no
longer possible to create new TLS compression methods without
using the OpenSSL source. Only ZLIB is supported by default.
Also, since the types are opaque, #ifdef guards to use "char *"
instead of the real type aren't necessary.
The changes are actually minor. Adding missing copyright to some
files makes the diff misleadingly big.
Reviewed-by: Matt Caswell <matt@openssl.org>
Matt's note: I added a call to X509V3err to Kurt's original patch.
RT#3840
Signed-off-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
If sk_SSL_CIPHER_new_null() returns NULL then ssl_bytes_to_cipher_list()
should also return NULL.
Based on an original patch by mrpre <mrpre@163.com>.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Add SSL_use_certiicate_chain file functions: this is works the same
way as SSL_CTX_use_certificate_chain_file but for an SSL structure.
Update SSL_CONF code to use the new function.
Update docs.
Update ordinals.
Reviewed-by: Rich Salz <rsalz@openssl.org>
For the various string-compare routines (strcmp, strcasecmp, str.*cmp)
use "strcmp()==0" instead of "!strcmp()"
Reviewed-by: Tim Hudson <tjh@openssl.org>
If server requests a certificate, but the client doesn't send one, cache
digested records. This is an optimisation and ensures the correct finished
mac is used when extended master secret is used with client authentication.
Reviewed-by: Tim Hudson <tjh@openssl.org>
The file name given to -CAserial might not exist yet. The
-CAcreateserial option decides if this is ok or not.
Previous to this change, -CAserial was a type '<' option, and in that
case, the existence of the file given as argument is tested quite
early, and is a failure if it doesn't. With the type 's' option, the
argument is just a string that the application can do whatever it
wants with.
Reviewed-by: Rich Salz <rsalz@openssl.org>
This is just to make sure that option is tested on a Unix build. This
option is already present in ms/testss.bat, so it's an easy steal.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Add command line switch entries to table and return SSL_CONF_TYPE_NONE for
them in SSL_CONF_cmd_value_type.
Update docs.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Compiling OpenSSL code with MSVC and /W4 results in a number of warnings.
One category of warnings is particularly interesting - C4701 (potentially
uninitialized local variable 'name' used). This warning pretty much means
that there's a code path which results in uninitialized variables being used
or returned. Depending on compiler, its options, OS, values in registers
and/or stack, the results can be nondeterministic. Cases like this are very
hard to debug so it's rational to fix these issues.
This patch contains a set of trivial fixes for all the C4701 warnings (just
initializing variables to 0 or NULL or appropriate error code) to make sure
that deterministic values will be returned from all the execution paths.
RT#3835
Signed-off-by: Matt Caswell <matt@openssl.org>
Matt's note: All of these appear to be bogus warnings, i.e. there isn't
actually a code path where an unitialised variable could be used - its just
that the compiler hasn't been able to figure that out from the logic. So
this commit is just about silencing spurious warnings.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Just as with the OPENSSL_malloc calls, consistently use sizeof(*ptr)
for memset and memcpy. Remove needless casts for those functions.
For memset, replace alternative forms of zero with 0.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reusing an SSL object when it has encountered a fatal error can
have bad consequences. This is a bug in application code not libssl
but libssl should be more forgiving and not crash.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Remove dependency on ssl_locl.h from v3_scts.c, and incidentally fix a build problem with
kerberos (the dependency meant v3_scts.c was trying to include krb5.h, but without having been
passed the relevanant -I flags to the compiler)
Reviewed-by: Dr. Stephen Henson <steve@openssl.org>
If CA.pl is reading from /dev/null, then "chop $FILE" gives a warning.
Sigh. Have to add "if $FILE". This just silences a build warning.
Thanks to GitHub user andrejs-igumenovs for help with this.
Reviewed-by: Richard Levitte <levitte@openssl.org>
For a local variable:
TYPE *p;
Allocations like this are "risky":
p = OPENSSL_malloc(sizeof(TYPE));
if the type of p changes, and the malloc call isn't updated, you
could get memory corruption. Instead do this:
p = OPENSSL_malloc(sizeof(*p));
Also fixed a few memset() calls that I noticed while doing this.
Reviewed-by: Richard Levitte <levitte@openssl.org>
RT2943 only complains about the incorrect check of -K argument size,
we might as well do the same thing with the -iv argument.
Before this, we only checked that the given argument wouldn't give a
bitstring larger than EVP_MAX_KEY_LENGTH. we can be more precise and
check against the size of the actual cipher used.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Don't do access check on destination directory; it breaks when euid/egid
is different from real uid/gid.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Signed-off-by: Rich Salz <rsalz@akamai.com>
ONEDIRS, EDIRS and WDIRS aren't used anywhere. Most probably remains
from a build system of the past, it's time they get put to rest.
Reviewed-by: Rich Salz <rsalz@openssl.org>
After the finale, the "real" final part. :) Do a recursive grep with
"-B1 -w [a-zA-Z0-9_]*_free" to see if any of the preceeding lines are
an "if NULL" check that can be removed.
Reviewed-by: Tim Hudson <tjh@openssl.org>
Don't check for NULL before calling free functions. This gets:
ERR_STATE_free
ENGINE_free
DSO_free
CMAC_CTX_free
COMP_CTX_free
CONF_free
NCONF_free NCONF_free_data _CONF_free_data
A sk_free use within OBJ_sigid_free
TS_TST_INFO_free (rest of TS_ API was okay)
Doc update for UI_free (all uses were fine)
X509V3_conf_free
X509V3_section_free
X509V3_string_free
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reformat CA.pl.in to follow coding style.
Also add "use strict" and "use warnings"
Also modify it to exit properly and report only when succeeded.
And some perl tweaks via Richard.
Reviewed-by: Richard Levitte <levitte@openssl.org>
This gets BN_.*free:
BN_BLINDING_free BN_CTX_free BN_FLG_FREE BN_GENCB_free
BN_MONT_CTX_free BN_RECP_CTX_free BN_clear_free BN_free BUF_MEM_free
Also fix a call to DSA_SIG_free to ccgost engine and remove some #ifdef'd
dead code in engines/e_ubsec.
Reviewed-by: Richard Levitte <levitte@openssl.org>
The problem occurs in EVP_PKEY_sign() when using RSA with X931 padding.
It is only triggered if the RSA key size is smaller than the digest length.
So with SHA512 you can trigger the overflow with anything less than an RSA
512 bit key. I managed to trigger a 62 byte overflow when using a 16 bit RSA
key. This wasn't sufficient to cause a crash, although your mileage may
vary.
In practice RSA keys of this length are never used and X931 padding is very
rare. Even if someone did use an excessively short RSA key, the chances of
them combining that with a longer digest and X931 padding is very
small. For these reasons I do not believe there is a security implication to
this. Thanks to Kevin Wojtysiak (Int3 Solutions) and Paramjot Oberoi (Int3
Solutions) for reporting this issue.
Reviewed-by: Andy Polyakov <appro@openssl.org>
Add a sanity check to the print_bin function to ensure that the |off|
argument is positive. Thanks to Kevin Wojtysiak (Int3 Solutions) and
Paramjot Oberoi (Int3 Solutions) for reporting this issue.
Reviewed-by: Andy Polyakov <appro@openssl.org>
Sanity check the |len| parameter to ensure it is positive. Thanks to Kevin
Wojtysiak (Int3 Solutions) and Paramjot Oberoi (Int3 Solutions) for
reporting this issue.
Reviewed-by: Andy Polyakov <appro@openssl.org>
The return value is checked for 0. This is currently safe but we should
really check for <= 0 since -1 is frequently used for error conditions.
Thanks to Kevin Wojtysiak (Int3 Solutions) and Paramjot Oberoi (Int3
Solutions) for reporting this issue.
Reviewed-by: Andy Polyakov <appro@openssl.org>
For SSLv3 the code assumes that |header_length| > |md_block_size|. Whilst
this is true for all SSLv3 ciphersuites, this fact is far from obvious by
looking at the code. If this were not the case then an integer overflow
would occur, leading to a subsequent buffer overflow. Therefore I have
added an explicit sanity check to ensure header_length is always valid.
Thanks to Kevin Wojtysiak (Int3 Solutions) and Paramjot Oberoi (Int3
Solutions) for reporting this issue.
Reviewed-by: Andy Polyakov <appro@openssl.org>
The static function dynamically allocates an output buffer if the output
grows larger than the static buffer that is normally used. The original
logic implied that |currlen| could be greater than |maxlen| which is
incorrect (and if so would cause a buffer overrun). Also the original
logic would call OPENSSL_malloc to create a dynamic buffer equal to the
size of the static buffer, and then immediately call OPENSSL_realloc to
make it bigger, rather than just creating a buffer than was big enough in
the first place. Thanks to Kevin Wojtysiak (Int3 Solutions) and Paramjot
Oberoi (Int3 Solutions) for reporting this issue.
Reviewed-by: Andy Polyakov <appro@openssl.org>
There was already a sanity check to ensure the passed buffer length is not
zero. Extend this to ensure that it also not negative. Thanks to Kevin
Wojtysiak (Int3 Solutions) and Paramjot Oberoi (Int3 Solutions) for
reporting this issue.
Reviewed-by: Andy Polyakov <appro@openssl.org>
The various implementations of EVP_CTRL_AEAD_TLS_AAD expect a buffer of at
least 13 bytes long. Add sanity checks to ensure that the length is at
least that. Also add a new constant (EVP_AEAD_TLS1_AAD_LEN) to evp.h to
represent this length. Thanks to Kevin Wojtysiak (Int3 Solutions) and
Paramjot Oberoi (Int3 Solutions) for reporting this issue.
Reviewed-by: Andy Polyakov <appro@openssl.org>
Add a sanity check to DES_enc_write to ensure the buffer length provided
is not negative. Thanks to Kevin Wojtysiak (Int3 Solutions) and Paramjot
Oberoi (Int3 Solutions) for reporting this issue.
Reviewed-by: Andy Polyakov <appro@openssl.org>
Add OPENSSL_clear_free which merges cleanse and free.
(Names was picked to be similar to BN_clear_free, etc.)
Removed OPENSSL_freeFunc macro.
Fixed the small simple ones that are left:
CRYPTO_free CRYPTO_free_locked OPENSSL_free_locked
Reviewed-by: Richard Levitte <levitte@openssl.org>
No point in proceeding if you're out of memory. So change
*all* OPENSSL_malloc calls in apps to use the new routine which
prints a message and exits.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Don't check for NULL before calling a free routine. This gets X509_.*free:
x509_name_ex_free X509_policy_tree_free X509_VERIFY_PARAM_free
X509_STORE_free X509_STORE_CTX_free X509_PKEY_free
X509_OBJECT_free_contents X509_LOOKUP_free X509_INFO_free
Reviewed-by: Richard Levitte <levitte@openssl.org>
Do not check for NULL before calling a free routine. This addresses:
ASN1_BIT_STRING_free ASN1_GENERALIZEDTIME_free ASN1_INTEGER_free
ASN1_OBJECT_free ASN1_OCTET_STRING_free ASN1_PCTX_free ASN1_SCTX_free
ASN1_STRING_clear_free ASN1_STRING_free ASN1_TYPE_free
ASN1_UTCTIME_free M_ASN1_free_of
Reviewed-by: Richard Levitte <levitte@openssl.org>
The big apps cleanup broke the windows build. This commit
fixes some miscellaneous issues so that it builds again.
Reviewed-by: Andy Polyakov <appro@openssl.org>
There were a set of includes in dtls1.h which are now redundant due to the
libssl opaque work. This commit removes those includes, which also has the
effect of resolving one issue preventing building on windows (i.e. the
include of winsock.h)
Reviewed-by: Andy Polyakov <appro@openssl.org>
Remove need for multiple arrays, parse the X509 name
one RDN at a time. Thanks to Andy for careful review.
Reviewed-by: Andy Polyakov <appro@openssl.org>
Many functions had a BIO* parameter, and it was always called
with bio_err. Remove the param and just use bio_err.
Reviewed-by: Matt Caswell <matt@openssl.org>
Remove ERR_[gs]et_implementation as they were not undocumented and
useless (the data structure was opaque).
Halve the number of lock/unlock calls in almost all ERR_
functions by letting the caller of get_hash or int_thread_set
able to lock. Very useful when looping, such as adding errors,
or when getting the hash and immediately doing a lookup on it.
Reviewed-by: Richard Levitte <levitte@openssl.org>
We have an increasing number of function declarations starting with
'__owur'. Unfortunately, util/ck_errf.pl fails to detect them. A
simple change fixes that issue.
Reviewed-by: Emilia Käsper <emilia@openssl.org>
The previous check assumed that the variables for each test app, ending
with TEST would be indication enough. Experience showed that this isn't
the best way. Instead, simply look for the EXE variable in test/Makefile.
Reviewed-by: Rich Salz <rsalz@openssl.org>
A variable declaration got dropped during a merge.
And if a compiler inlines strcmp() and you put a strcmp in an
assert message, the resultant stringification exceeds ANSI string
limits.
Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
There's a new "list" command, which takes a flag to say what
to list. Removing the old hacky commands. Re-ordered some
functions to remove some needless declarations.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Make setup_engine be a dummy if NO_ENGINE is enabled.
The option is not enabled if NO_ENGINE is enabled, so the one "wasted"
variable just sits there. Removes some variables and code.
Reviewed-by: Richard Levitte <levitte@openssl.org>
This is merges the old "rsalz-monolith" branch over to master. The biggest
change is that option parsing switch from cascasding 'else if strcmp("-foo")'
to a utility routine and somethin akin to getopt. Also, an error in the
command line no longer prints the full summary; use -help (or --help :)
for that. There have been many other changes and code-cleanup, see
bullet list below.
Special thanks to Matt for the long and detailed code review.
TEMPORARY:
For now, comment out CRYPTO_mem_leaks() at end of main
Tickets closed:
RT3515: Use 3DES in pkcs12 if built with no-rc2
RT1766: s_client -reconnect and -starttls broke
RT2932: Catch write errors
RT2604: port should be 'unsigned short'
RT2983: total_bytes undeclared #ifdef RENEG
RT1523: Add -nocert to fix output in x509 app
RT3508: Remove unused variable introduced by b09eb24
RT3511: doc fix; req default serial is random
RT1325,2973: Add more extensions to c_rehash
RT2119,3407: Updated to dgst.pod
RT2379: Additional typo fix
RT2693: Extra include of string.h
RT2880: HFS is case-insensitive filenames
RT3246: req command prints version number wrong
Other changes; incompatibilities marked with *:
Add SCSV support
Add -misalign to speed command
Make dhparam, dsaparam, ecparam, x509 output C in proper style
Make some internal ocsp.c functions void
Only display cert usages with -help in verify
Use global bio_err, remove "BIO*err" parameter from functions
For filenames, - always means stdin (or stdout as appropriate)
Add aliases for -des/aes "wrap" ciphers.
*Remove support for IISSGC (server gated crypto)
*The undocumented OCSP -header flag is now "-header name=value"
*Documented the OCSP -header flag
Reviewed-by: Matt Caswell <matt@openssl.org>
The function CRYPTO_strdup (aka OPENSSL_strdup) fails to check the return
value from CRYPTO_malloc to see if it is NULL before attempting to use it.
This patch adds a NULL check.
RT3786
Signed-off-by: Matt Caswell <matt@openssl.org>
(cherry picked from commit 37b0cf936744d9edb99b5dd82cae78a7eac6ad60)
Reviewed-by: Rich Salz <rsalz@openssl.org>
(cherry picked from commit 20d21389c8b6f5b754573ffb6a4dc4f3986f2ca4)
Add tables to convert between SSL_CIPHER fields and indices for ciphers
and MACs.
Reorganise ssl_ciph.c to use tables to lookup values and load them.
New functions SSL_CIPHER_get_cipher_nid and SSL_CIPHER_get_digest_nid.
Add documentation.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Make only errors go to stderr.
Print count and size before the loop, so you can see it's an 838K
message that will take a few moments.
Reviewed-by: Richard Levitte <levitte@openssl.org>
The files removed are the ones that were symbolic links before, but
aren't now, so we should not remove them any more.
Reviewed-by: Stephen Henson <steve@openssl.org>
EAP-FAST session resumption relies on handshake message lookahead
to determine server intentions. Commits
980bc1ec61
and
7b3ba508af
removed the lookahead so broke session resumption.
This change partially reverts the commits and brings the lookahead back
in reduced capacity for TLS + EAP-FAST only. Since EAP-FAST does not
support regular session tickets, the lookahead now only checks for a
Finished message.
Regular handshakes are unaffected by this change.
Reviewed-by: David Benjamin <davidben@chromium.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
This addresses
- request for improvement for faster key setup in RT#3576;
- clearing registers and stack in RT#3554 (this is more of a gesture to
see if there will be some traction from compiler side);
- more commentary around input parameters handling and stack layout
(desired when RT#3553 was reviewed);
- minor size and single block performance optimization (was lying around);
Reviewed-by: Matt Caswell <matt@openssl.org>
Fix bug where i2c_ASN1_INTEGER mishandles zero if it is marked as
negative.
Thanks to Huzaifa Sidhpurwala <huzaifas@redhat.com> and
Hanno Böck <hanno@hboeck.de> for reporting this issue.
Reviewed-by: Rich Salz <rsalz@openssl.org>
A 0-length ciphers list is never permitted. The old code only used to
reject an empty ciphers list for connections with a session ID. It
would later error out on a NULL structure, so this change just moves
the alert closer to the problem source.
Reviewed-by: Rich Salz <rsalz@openssl.org>
The disabled set of -Weverything is hard to maintain across versions.
Use -Wall -Wextra but also document other useful warnings that currently trigger.
Reviewed-by: Rich Salz <rsalz@openssl.org>
If OpenSSL is configured with no-tlsext then ssl_get_prev_session can read
past the end of the ClientHello message if the session_id length in the
ClientHello is invalid. This should not cause any security issues since the
underlying buffer is 16k in size. It should never be possible to overrun by
that many bytes.
This is probably made redundant by the previous commit - but you can never be
too careful.
With thanks to Qinghao Tang for reporting this issue.
Reviewed-by: Rich Salz <rsalz@openssl.org>
The ClientHello processing is insufficiently rigorous in its checks to make
sure that we don't read past the end of the message. This does not have
security implications due to the size of the underlying buffer - but still
needs to be fixed.
With thanks to Qinghao Tang for reporting this issue.
Reviewed-by: Rich Salz <rsalz@openssl.org>
While *pval is usually a pointer in rare circumstances it can be a long
value. One some platforms (e.g. WIN64) where
sizeof(long) < sizeof(ASN1_VALUE *) this will write past the field.
*pval is initialised correctly in the rest of ASN1_item_ex_new so setting it
to NULL is unecessary anyway.
Thanks to Julien Kauffmann for reporting this issue.
Reviewed-by: Richard Levitte <levitte@openssl.org>
No need for here documents, just use "yes" or </dev/null.
No need for "|| exit 1" clauses, just use "set -e".
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Fix a "&" that should have been "!" when processing read_ahead.
RT#3793
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Removed commented-out tests
Standardize on doing
cmd ... || exit 1
instead of
cmd ...
if [ $? != 0] ; then
exit 1
fi
where that if statement has ben one, three, or four lines, variously.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Since source reformat, we ended up with some error reason string
definitions that spanned two lines. That in itself is fine, but we
sometimes edited them to provide better strings than what could be
automatically determined from the reason macro, for example:
{ERR_REASON(SSL_R_NO_GOST_CERTIFICATE_SENT_BY_PEER),
"Peer haven't sent GOST certificate, required for selected ciphersuite"},
However, mkerr.pl didn't treat those two-line definitions right, and
they ended up being retranslated to whatever the macro name would
indicate, for example:
{ERR_REASON(SSL_R_NO_GOST_CERTIFICATE_SENT_BY_PEER),
"No gost certificate sent by peer"},
Clearly not what we wanted. This change fixes this problem.
Reviewed-by: Matt Caswell <matt@openssl.org>
Output a consistent "start" marker for each test.
Remove "2>/dev/null" from Makefile command lines.
Add OPENSSL_CONFIG=/dev/null for places where it's needed, in
order to suppress a warning message from the openssl CLI.
Reviewed-by: Richard Levitte <levitte@openssl.org>
The macros BSWAP4 and BSWAP8 have statetemnt expressions
implementations that use local variable names that shadow variables
outside the macro call, generating warnings like this
e_aes_cbc_hmac_sha1.c:263:14: warning: declaration shadows a local variable
[-Wshadow]
seqnum = BSWAP8(blocks[0].q[0]);
^
../modes/modes_lcl.h:41:29: note: expanded from macro 'BSWAP8'
^
e_aes_cbc_hmac_sha1.c:223:12: note: previous declaration is here
size_t ret = 0;
^
Have clang be quiet by modifying the macro variable names slightly
(suffixing them with an underscore).
Reviewed-by: Rich Salz <rsalz@openssl.org>
We use GNU statement expressions in crypto/md32_common.h, surrounded
by checks that GNU C is indeed used to compile. It seems that clang,
at least on Linux, pretends to be GNU C, therefore finds the statement
expressions and then warns about them.
The solution is to have clang be quiet about it.
Reviewed-by: Rich Salz <rsalz@openssl.org>
ebcdic.c:284:7: warning: ISO C requires a translation unit to contain at least one
declaration [-Wempty-translation-unit]
^
1 warning generated.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Complete reimplementation of d2i_SSL_SESSION and i2d_SSL_SESSION using
new ASN.1 code and eliminating use of old ASN.1 macros.
Reviewed-by: Rich Salz <rsalz@openssl.org>
ARM has optimized Cortex-A5x pipeline to favour pairs of complementary
AES instructions. While modified code improves performance of post-r0p0
Cortex-A53 performance by >40% (for CBC decrypt and CTR), it hurts
original r0p0. We favour later revisions, because one can't prevent
future from coming. Improvement on post-r0p0 Cortex-A57 exceeds 50%,
while new code is not slower on r0p0, or Apple A7 for that matter.
[Update even SHA results for latest Cortex-A53.]
Reviewed-by: Richard Levitte <levitte@openssl.org>
This engine is for VMS only, and isn't really part of the core OpenSSL
but rather a side project of its own that just happens to have tagged
along for a long time. The reasons why it has remained within the
OpenSSL source are long lost in history, and there not being any real
reason for it to remain here, it's time for it to move out.
This side project will appear as a project in its own right, the
location of which will be announced later on.
Reviewed-by: Tim Hudson <tjh@openssl.org>
Rewrite ASN1_TYPE_set_int_octetstring and ASN1_TYPE_get_int_octetstring
to use the new ASN.1 code instead of the old macros.
Reviewed-by: Rich Salz <rsalz@openssl.org>
GitConfigure: no more 'no-symlinks'
util/bat.sh, util/mk1mf.pl, util/pl/VC-32.pl, util/pl/unix.pl:
- Remove all uses of EXHEADER.
That includes removing the use if INC_D and INCO_D.
- Replace the check for TEST with a check for [A-Z0-9_]*TEST.
Reviewed-by: Rich Salz <rsalz@openssl.org>
With no more symlinks, there's no need for those variables, or the links
target. This also goes for all install: and uninstall: targets that do
nothing but copy $(EXHEADER) files, since that's now taken care of by the
top Makefile.
Also, removed METHTEST from test/Makefile. It looks like an old test that's
forgotten...
Reviewed-by: Rich Salz <rsalz@openssl.org>
Rather than making include/openssl/foo.h a symlink to
crypto/foo/foo.h, this change moves the file to include/openssl/foo.h
once and for all.
Likewise, move crypto/foo/footest.c to test/footest.c, instead of
symlinking it there.
Originally-by: Geoff Thorpe <geoff@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
RFC5915 requires the use of the I2OSP primitive as defined in RFC3447
for storing an EC Private Key. This converts the private key into an
OCTETSTRING and retains any leading zeros. This commit ensures that those
leading zeros are present if required.
Reviewed-by: Andy Polyakov <appro@openssl.org>
Fix up various things that were missed during the record layer work. All
instances where we are breaking the encapsulation rules.
Reviewed-by: Richard Levitte <levitte@openssl.org>
When building on Unix, there are times when the 'EX_LIB' MINFO variable
contains valuable information. Make sure to take care of it.
fixrules in util/pl/unix.pl was previously changed with a simpler fix of
rules, with a comment claiming that's compatible with -j. Unfortunately,
this breaks multiline rules and doesn't change anything for single line
rules. While at it, do not prefix pure echo lines with a 'cd $(TEST_D) &&',
as that's rather silly.
Reviewed-by: Andy Polyakov <appro@openssl.org>
Update code to use ASN1_TYPE_pack_sequence and ASN1_TYPE_unpack_sequence
instead of performing the same operation manually.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Add new functions ASN1_TYPE_pack_sequence and ASN1_TYPE_unpack_sequence:
these encode and decode ASN.1 SEQUENCE using an ASN1_TYPE structure.
Update ordinals.
Reviewed-by: Rich Salz <rsalz@openssl.org>
The logic with how 'ok' was calculated didn't quite convey what's "ok",
so the logic is slightly redone to make it less confusing.
Reviewed-by: Andy Polyakov <appro@openssl.org>
The FAQ says this:
After the release of OpenSSL 1.0.0 the versioning scheme changed. Letter
releases (e.g. 1.0.1a) can only contain bug and security fixes and no
new features. Minor releases change the last number (e.g. 1.0.2) and
can contain new features that retain binary compatibility. Changes to
the middle number are considered major releases and neither source nor
binary compatibility is guaranteed.
With such a scheme (and with the thinking that it's nice if the shared
library version stays on track with the OpenSSL version), it's rather
futile to keep the minor release number in the shared library version.
The deed already done with OpenSSL 1.0.x can't be changed, but with
1.x.y, x=1 and on, 1.x as shared library version is sufficient.
Reviewed-by: Kurt Roeckx <kurt@openssl.org>
Remove partially implemented d2i_X509_PKEY and i2d_X509_PKEY: nothing
uses them and they don't work properly. Update ordinals.
Reviewed-by: Kurt Roeckx <kurt@openssl.org>
EVP_.*free; this gets:
EVP_CIPHER_CTX_free EVP_PKEY_CTX_free EVP_PKEY_asn1_free
EVP_PKEY_asn1_set_free EVP_PKEY_free EVP_PKEY_free_it
EVP_PKEY_meth_free; and also EVP_CIPHER_CTX_cleanup
Reviewed-by: Kurt Roeckx <kurt@openssl.org>
Remove the combine option. This was used for compatibility with some
non standard behaviour in ancient versions of OpenSSL: specifically
the X509_ATTRIBUTE and DSAPublicKey handling. Since these have now
been revised it is no longer needed.
Reviewed-by: Richard Levitte <levitte@openssl.org>
DSA public keys could exist in two forms: a single Integer type or a
SEQUENCE containing the parameters and public key with a field called
"write_params" deciding which form to use. These forms are non standard
and were only used by functions containing "DSAPublicKey" in the name.
Simplify code to only use the parameter form and encode the public key
component directly in the DSA public key method.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Fix some strange formatting in record.h. This was probably originally
introduced as part of the reformat work.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Replace the hard coded value 8 (the size of the sequence number) with a
constant defined in a macro.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Also push some usage of last_write_sequence out of dtls1_retransmit_message
and into the record layer.
Reviewed-by: Richard Levitte <levitte@openssl.org>
up some access to them. Now that various functions have been moved into the
record layer they no longer need to use the accessor macros.
Reviewed-by: Richard Levitte <levitte@openssl.org>
The recent updates to libssl to enforce stricter return code checking, left
a small number of instances behind where return codes were being swallowed
(typically because the function they were being called from was declared as
void). This commit fixes those instances to handle the return codes more
appropriately.
Reviewed-by: Richard Levitte <levitte@openssl.org>
The X509_ATTRIBUTE structure includes a hack to tolerate malformed
attributes that encode as the type instead of SET OF type. This form
is never created by OpenSSL and shouldn't be needed any more.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Support loading of key and certificate from the same file if
SSL_CONF_FLAG_REQUIRE_PRIVATE is set. This is done by remembering the
filename used for each certificate type and attempting to load a private
key from the file when SSL_CONF_CTX_finish is called.
Update docs.
Reviewed-by: Richard Levitte <levitte@openssl.org>
The justification for RAND_pseudo_bytes is somewhat dubious, and the reality
is that it is frequently being misused. RAND_bytes and RAND_pseudo_bytes in
the default implementation both end up calling ssleay_rand_bytes. Both may
return -1 in an error condition. If there is insufficient entropy then
both will return 0, but RAND_bytes will additionally add an error to the
error queue. They both return 1 on success.
Therefore the fundamental difference between the two is that one will add an
error to the error queue with insufficient entory whilst the other will not.
Frequently there are constructions of this form:
if(RAND_pseudo_bytes(...) <= 1)
goto err;
In the above form insufficient entropy is treated as an error anyway, so
RAND_bytes is probably the better form to use.
This form is also seen:
if(!RAND_pseudo_bytes(...))
goto err;
This is technically not correct at all since a -1 return value is
incorrectly handled - but this form will also treat insufficient entropy as
an error.
Within libssl it is required that you have correctly seeded your entropy
pool and so there seems little benefit in using RAND_pseudo_bytes.
Similarly in libcrypto many operations also require a correctly seeded
entropy pool and so in most interesting cases you would be better off
using RAND_bytes anyway. There is a significant risk of RAND_pseudo_bytes
being incorrectly used in scenarios where security can be compromised by
insufficient entropy.
If you are not using the default implementation, then most engines use the
same function to implement RAND_bytes and RAND_pseudo_bytes in any case.
Given its misuse, limited benefit, and potential to compromise security,
RAND_pseudo_bytes has been deprecated.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Filled in lots of return value checks that were missing the GOST engine, and
added appropriate error handling.
Reviewed-by: Richard Levitte <levitte@openssl.org>
In ssl3_send_new_session_ticket the message to be sent is constructed. We
skip adding the length of the session ticket initially, then call
ssl_set_handshake_header, and finally go back and add in the length of the
ticket. Unfortunately, in DTLS, ssl_set_handshake_header also has the side
effect of buffering the message for subsequent retransmission if required.
By adding the ticket length after the call to ssl_set_handshake_header the
message that is buffered is incomplete, causing an invalid message to be
sent on retransmission.
Reviewed-by: Richard Levitte <levitte@openssl.org>
In DTLS, immediately prior to epoch change, the write_sequence is supposed
to be stored in s->d1->last_write_sequence. The write_sequence is then reset
back to 00000000. In the event of retransmits of records from the previous
epoch, the last_write_sequence is restored. This commit fixes a bug in
DTLS1.2 where the write_sequence was being reset before last_write_sequence
was saved, and therefore retransmits are sent with incorrect sequence
numbers.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Start ensuring all OpenSSL "free" routines allow NULL, and remove
any if check before calling them.
This gets DH_free, DSA_free, RSA_free
Reviewed-by: Matt Caswell <matt@openssl.org>
Thanks to the change of mkdef.pl, a few more deprecated functions were
properly defined in util/libeay.num.
Reviewed-by: Matt Caswell <matt@openssl.org>
For the moment, this is specially crafted for DECLARE_DEPRECATED because
that's where we found the problem, but it can easily be expanded to other
types of special delarations when needed.
Reviewed-by: Matt Caswell <matt@openssl.org>
Disable loop checking when we retry verification with an alternative path.
This fixes the case where an intermediate CA is explicitly trusted and part
of the untrusted certificate list. By disabling loop checking for this case
the untrusted CA can be replaced by the explicitly trusted case and
verification will succeed.
Reviewed-by: Matt Caswell <matt@openssl.org>
If a set of certificates is supplied to OCSP_basic_verify use those in
addition to any present in the OCSP response as untrusted CAs when
verifying a certificate chain.
PR#3668
Reviewed-by: Matt Caswell <matt@openssl.org>
Move ASN.1 internals used across multiple directories into new internal
header file asn1_int.h remove crypto/Makefile hack which allowed other
directories to include "asn1_locl.h"
Reviewed-by: Matt Caswell <matt@openssl.org>
Start ensuring all OpenSSL "free" routines allow NULL, and remove
any if check before calling them.
This gets ASN1_OBJECT_free and ASN1_STRING_free.
Reviewed-by: Matt Caswell <matt@openssl.org>
Thanks to a -I.., the path does work, at least on unix. However, this
doesn't work so well on VMS. Correcting the path to not rely on given
-I does work on both.
Reviewed-by: Matt Caswell <matt@openssl.org>
Remove old ASN.1 COMPAT type. This was meant as a temporary measure
so older ASN.1 code (from OpenSSL 0.9.6) still worked. It's a hack
which breaks constification and hopefully nothing uses it now, if
it ever did.
Reviewed-by: Matt Caswell <matt@openssl.org>
The certificate already contains the DH parameters in that case.
ssl3_send_server_key_exchange() would fail in that case anyway.
Reviewed-by: Matt Caswell <matt@openssl.org>
Change ssl_set_handshake_header from return void to returning int, and
handle error return code appropriately.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Ensure that all libssl functions called from within the apps have their
return values checked where appropriate.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Ensure that all functions have their return values checked where
appropriate. This covers all functions defined and called from within
libssl.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Mark most functions returning a result defined in any libssl header file
with __owur to warn if they are used without checking the return value.
Use -DUNUSED_RETURN compiler flag with gcc to activate these warnings.
Some functions returning a result are skipped if it is common and valid to
use these functions without checking the return value.
Reviewed-by: Richard Levitte <levitte@openssl.org>
In order to receive warnings on unused function return values the flag
-DDEBUG_UNUSED must be passed to the compiler. This change adds that for the
--strict-warnings Configure option.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Follow up on the earlier "Do not keep TABLE in version control".
Actually removing TABLE from version control was forgotten.
Reviewed-by: Matt Caswell <matt@openssl.org>
Don't check that the curve appears in the list of acceptable curves for the
peer, if they didn't send us such a list (RFC 4492 does not require that the
extension be sent).
Reviewed-by: Emilia Käsper <emilia@openssl.org>
Remove old M_ASN1_ macros and replace any occurences with the corresponding
function.
Remove d2i_ASN1_bytes, d2i_ASN1_SET, i2d_ASN1_SET: no longer used internally.
Reviewed-by: Rich Salz <rsalz@openssl.org>
This tests the unwrap algorithm with an invalid key. The result should
be rejected without returning any plaintext.
Reviewed-by: Emilia Käsper <emilia@openssl.org>
crypto/modes/wrap128.c was heavily refactored to support AES Key Wrap
with Padding, and four bugs were introduced into CRYPTO_128_unwrap() at
that time:
- crypto_128_unwrap_raw()'s return value ('ret') is checked incorrectly,
and the function immediately returns 'ret' in (almost) all cases.
This makes the IV checking code later in the function unreachable, but
callers think the IV check succeeded since CRYPTO_128_unwrap()'s
return value is non-zero.
FIX: Return 0 (error) if crypto_128_unwrap_raw() returned 0 (error).
- crypto_128_unwrap_raw() writes the IV to the 'got_iv' buffer, not to
the first 8 bytes of the output buffer ('out') as the IV checking code
expects. This makes the IV check fail.
FIX: Compare 'iv' to 'got_iv', not 'out'.
- The data written to the output buffer ('out') is "cleansed" if the IV
check fails, but the code passes OPENSSL_cleanse() the input buffer
length ('inlen') instead of the number of bytes that
crypto_128_unwrap_raw() wrote to the output buffer ('ret'). This
means that OPENSSL_cleanse() could potentially write past the end of
'out'.
FIX: Change 'inlen' to 'ret' in the OPENSSL_cleanse() call.
- CRYPTO_128_unwrap() is returning the length of the input buffer
('inlen') instead of the number of bytes written to the output buffer
('ret'). This could cause the caller to read past the end of 'out'.
FIX: Return 'ret' instead of 'inlen' at the end of the function.
PR#3749
Reviewed-by: Stephen Henson <steve@openssl.org>
Reviewed-by: Emilia Käsper <emilia@openssl.org>
In PKCS#7, the ASN.1 content component is optional.
This typically applies to inner content (detached signatures),
however we must also handle unexpected missing outer content
correctly.
This patch only addresses functions reachable from parsing,
decryption and verification, and functions otherwise associated
with reading potentially untrusted data.
Correcting all low-level API calls requires further work.
CVE-2015-0289
Thanks to Michal Zalewski (Google) for reporting this issue.
Reviewed-by: Steve Henson <steve@openssl.org>
Fix segmentation violation when ASN1_TYPE_cmp is passed a boolean type. This
can be triggered during certificate verification so could be a DoS attack
against a client or a server enabling client authentication.
CVE-2015-0286
Reviewed-by: Richard Levitte <levitte@openssl.org>
If client auth is used then a server can seg fault in the event of a DHE
cipher being used and a zero length ClientKeyExchange message being sent
by the client. This could be exploited in a DoS attack.
CVE-2015-1787
Reviewed-by: Richard Levitte <levitte@openssl.org>
If a client renegotiates using an invalid signature algorithms extension
it will crash a server with a NULL pointer dereference.
Thanks to David Ramos of Stanford University for reporting this bug.
CVE-2015-0291
Reviewed-by: Tim Hudson <tjh@openssl.org>
Fix a bug where invalid PSS parameters are not rejected resulting in a
NULL pointer exception. This can be triggered during certificate
verification so could be a DoS attack against a client or a server
enabling client authentication.
Thanks to Brian Carpenter for reporting this issues.
CVE-2015-0208
Reviewed-by: Tim Hudson <tjh@openssl.org>
The DTLSv1_listen function is intended to be stateless and processes
the initial ClientHello from many peers. It is common for user code to
loop over the call to DTLSv1_listen until a valid ClientHello is received
with an associated cookie. A defect in the implementation of DTLSv1_listen
means that state is preserved in the SSL object from one invokation to the
next that can lead to a segmentation fault. Erorrs processing the initial
ClientHello can trigger this scenario. An example of such an error could
be that a DTLS1.0 only client is attempting to connect to a DTLS1.2 only
server.
CVE-2015-0207
Reviewed-by: Richard Levitte <levitte@openssl.org>
OpenSSL 1.0.2 introduced the "multiblock" performance improvement. This
feature only applies on 64 bit x86 architecture platforms that support AES
NI instructions. A defect in the implementation of "multiblock" can cause
OpenSSL's internal write buffer to become incorrectly set to NULL when
using non-blocking IO. Typically, when the user application is using a
socket BIO for writing, this will only result in a failed connection.
However if some other BIO is used then it is likely that a segmentation
fault will be triggered, thus enabling a potential DoS attack.
CVE-2015-0290
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Andy Polyakov <appro@openssl.org>
./config would translate -d into having the target get a 'debug-'
prefix, and then run './Configure LIST' to find out if such a
debugging target exists or not.
With the recent changes, the separate 'debug-foo' targets are
disappearing, and we're giving the normal targets debugging
capabilities instead. Unfortunately, './config' wasn't changed to
match this new behavior.
This change introduces the arguments '--debug' and '--release' - the
latter just for orthogonality - to ./Configure, and ./config now
treats -d by adding '--debug' to the options for ./Configure.
Reviewed-by: Matt Caswell <matt@openssl.org>
Some miscellaneous removal of dead code from apps. Also fix an issue with
error handling with pkcs7.
Reviewed-by: Richard Levitte <levitte@openssl.org>
In the probable_prime() function we behave slightly different if the number
of bits we are interested in is <= BN_BITS2 (the num of bits in a BN_ULONG).
As part of the calculation we work out a size_limit as follows:
size_limit = (((BN_ULONG)1) << bits) - BN_get_word(rnd) - 1;
There is a problem though if bits == BN_BITS2. Shifting by that much causes
undefined behaviour. I did some tests. On my system BN_BITS2 == 64. So I
set bits to 64 and calculated the result of:
(((BN_ULONG)1) << bits)
I was expecting to get the result 0. I actually got 1! Strangely this...
(((BN_ULONG)0) << BN_BITS2)
...does equal 0! This means that, on my system at least, size_limit will be
off by 1 when bits == BN_BITS2.
This commit fixes the behaviour so that we always get consistent results.
Reviewed-by: Andy Polyakov <appro@openssl.org>
The function CRYPTO_128_unwrap_pad uses an 8 byte AIV (Alternative Initial
Value). The least significant 4 bytes of this is placed into the local
variable |ptext_len|. This is done as follows:
ptext_len = (aiv[4] << 24) | (aiv[5] << 16) | (aiv[6] << 8) | aiv[7];
aiv[4] is an unsigned char, but (aiv[4] << 24) is promoted to a *signed*
int - therefore we could end up shifting into the sign bit and end up with
a negative value. |ptext_len| is a size_t (typically 64-bits). If the
result of the shifts is negative then the upper bits of |ptext_len| will
all be 1.
This commit fixes the issue by explicitly casting to an unsigned int.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Passing a negative value for the "-time" option to s_time results in a seg
fault. This commit fixes it so that time has to be greater than 0.
Reviewed-by: Andy Polyakov <appro@openssl.org>
The function tls1_PRF counts the number of digests in use and partitions
security evenly between them. There always needs to be at least one digest
in use, otherwise this is an internal error. Add a sanity check for this.
Reviewed-by: Richard Levitte <levitte@openssl.org>
The function sk_zero is supposed to zero the elements held within a stack.
It uses memset to do this. However it calculates the size of each element
as being sizeof(char **) instead of sizeof(char *). This probably doesn't
make much practical difference in most cases, but isn't a portable
assumption.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Move memory allocation failure checks closer to the site of the malloc in
dgst app. Only a problem if the debug flag is set...but still should be
fixed.
Reviewed-by: Tim Hudson <tjh@openssl.org>
TABLE was always a debugging tool, and permitted everyone to see the
effect of changes in the string-format configs. The hash-format
configs being much more readable, distributing TABLE becomes much less
necessary.
Being able to produce a TABLE is kept, however, as it still is a
useful debugging tool for configs, what with multi-level inheritance
and all.
Reviewed-by: Andy Polyakov <appro@openssl.org>
Move obviously personal configurations to personal files.
Note: those files should really not be in the main repo at all
Reviewed-by: Andy Polyakov <appro@openssl.org>
Because base templates express inheritance of values, the attribute is
renamed to 'inherit_from', and texts about this talk about 'inheritance(s)'
rather than base templates.
As they were previously implemented, base templates that were listed
together would override one another, the first one acting as defaults for
the next and so on.
However, it was pointed out that a strength of inheritance would be to
base configurations on several templates - for example one for CPU, one
for operating system and one for compiler - and that requires a different
way of combining those templates. With this change, inherited values
from several inheritances are concatenated by default (keep on reading).
Also, in-string templates with the double-curly syntax are removed,
replaced with the possibility to have a configuration value be a coderef
(i.e. a 'sub { /* your code goes here */ }') that gets the list of values
from all inheritances as the list @_. The result of executing such a
coderef on a list of values is assumed to become a string. ANY OTHER
FORM OF VALUE WILL CURRENTLY BREAK.
As a matter of fact, an attribute in the current config with no value is
assumed to have this coderef as value:
sub { join(' ', @_) }
While we're at it, rename debug-[cl]flags to debug_[cl]flags and
nodebug-[cl]flags to release_[cl]flags.
Reviewed-by: Andy Polyakov <appro@openssl.org>
Base templates are templates that are used to inherit from. They can
loosely be compared with parent class inheritance in object orientation.
They can be used for the same purpose as the variables with multi-field
strings are used in old-style string configurations.
Base templates are declared with the base_templates configuration
attribute, like so:
"example_target" => {
base_templates => [ "x86_asm", ... ]
...
}
Note: The value of base_templates MUST be an array reference (an array
enclosed in square brackets).
Any configuration target can be used as a base template by another. It
is also possible to have a target that's a pure template and not meant to
be used directly as a configuration target. Such a target is marked with
the template configuration attribute, like so:
"example_template" => {
template => 1,
cc => "mycc",
...
},
As part of this commit, all variables with multi-field strings have been
translated to pure templates. The variables currently remain since we
can't expect people to shift to hash table configurations immediately.
Reviewed-by: Andy Polyakov <appro@openssl.org>
Template references are words with double brackets, and refer to the
same field in the target pointed at the the double bracketed word.
For example, if a target's configuration has the following entry:
'cflags' => '-DFOO {{x86_debug}}'
... then {{x86_debug}} will be replaced with the 'cflags' value from
target 'x86_debug'.
Note: template references are resolved recursively, and circular
references are not allowed
Reviewed-by: Andy Polyakov <appro@openssl.org>
The reasoning is that configuration strings are hard to read and error
prone, and that a better way would be for them to be key => value hashes.
Configure is made to be able to handle target configuration values as a
string as well as a hash. It also does the best it can to combine a
"debug-foo" target with a "foo" target, given that they are similar
except for the cflags and lflags values. The latter are spliced into
options that are common for "debug-foo" and "foo", options that exist
only with "debug-foo" and options that exist only with "foo", and make
them into combinable attributes that holds common cflags, extra cflags
for debuggin and extra cflags for non-debugging configurations.
The next step is to make it possible to have template configurations.
Reviewed-by: Andy Polyakov <appro@openssl.org>
Previously, ASN1_UTCTIME_cmp_time_t would return 1 if s > t, -1 if
s < t, and 0 if s == t.
This behavior was broken in a refactor [0], resulting in the opposite
time comparison behavior.
[0]: 904348a492
PR#3706
Reviewed-by: Stephen Henson <steve@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
It created the cert structure in SSL_CTX or SSL if it was NULL, but they can
never be NULL as the comments already said.
Reviewed-by: Dr. Stephen Henson <steve@openssl.org>
Td4 and Te4 are arrays of u8. A u8 << int promotes the u8 to an int first then shifts.
If the mathematical result of a shift (as modelled by lhs * 2^{rhs}) is not representable
in an integer, behaviour is undefined. In other words, you can't shift into the sign bit
of a signed integer. Fix this by casting to u32 whenever we're shifting left by 24.
(For consistency, cast other shifts, too.)
Caught by -fsanitize=shift
Submitted by Nick Lewycky (Google)
Reviewed-by: Andy Polyakov <appro@openssl.org>
According to RFC 5649 section 4.1 step 1) we should not add padding
if plaintext length is multiply of 8 ockets.
This matches pseudo-code in http://dx.doi.org/10.6028/NIST.SP.800-38F
on page 15, section 6.3 KWP, algorithm 5 KWP-AE, step 2.
PR#3675
Reviewed-by: Stephen Henson <steve@openssl.org>
Reviewed-by: Andy Polyakov <appro@openssl.org>
Remove DECLARE_ASN1_SET_OF and DECLARE_PKCS12_STACK_OF these haven't been
used internally in OpenSSL for some time.
Reviewed-by: Rich Salz <rsalz@openssl.org>
When printing out an ASN.1 structure if the type is an item template don't
fall thru and attempt to interpret as a primitive type.
Reviewed-by: Andy Polyakov <appro@openssl.org>
In the RSA_X931_derive_ex a call to BN_CTX_new is made. This can return
NULL on error. However the return value is not tested until *after* it is
derefed! Also at the top of the function a test is made to ensure that
|rsa| is not NULL. If it is we go to the "err" label. Unfortunately the
error handling code deref's rsa.
Reviewed-by: Rich Salz <rsalz@openssl.org>
If SSL_check_chain is called with a NULL X509 object or a NULL EVP_PKEY
or the type of the public key is unrecognised then the local variable
|cpk| in tls1_check_chain does not get initialised. Subsequently an
attempt is made to deref it (after the "end" label), and a seg fault will
result.
Reviewed-by: Dr. Stephen Henson <steve@openssl.org>
The return value from ASN1_STRING_new() was not being checked which could
lead to a NULL deref in the event of a malloc failure. Also fixed a mem
leak in the error path.
Reviewed-by: Rich Salz <rsalz@openssl.org>
The return value from ASN1_STRING_new() was not being checked which could
lead to a NULL deref in the event of a malloc failure. Also fixed a mem
leak in the error path.
Reviewed-by: Rich Salz <rsalz@openssl.org>
The call to asn1_do_adb can return NULL on error, so we should check the
return value before attempting to use it.
Reviewed-by: Rich Salz <rsalz@openssl.org>
ASN1_primitive_new takes an ASN1_ITEM * param |it|. There are a couple
of conditional code paths that check whether |it| is NULL or not - but
later |it| is deref'd unconditionally. If |it| was ever really NULL then
this would seg fault. In practice ASN1_primitive_new is marked as an
internal function in the public header file. The only places it is ever
used internally always pass a non NULL parameter for |it|. Therefore, change
the code to sanity check that |it| is not NULL, and remove the conditional
checking.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Andy Polyakov <appro@openssl.org>
Calling EVP_DigestInit_ex which has already had the digest set up for it
should be possible. You are supposed to be able to pass NULL for the type.
However currently this seg faults.
Reviewed-by: Andy Polyakov <appro@openssl.org>
In the event of an error |rr| could be NULL. Therefore don't assume you can
use |rr| in the error handling code.
Reviewed-by: Andy Polyakov <appro@openssl.org>
Configure would load the glob "Configurations*". The problem with
this is that it also loads all kinds of backups of those
configurations that some editors do, like emacs' classic
'Configurations~'. The solution is to give them an extension, such as
'.conf', and make sure to end the glob with that.
Also, because 'Configurations.conf' makes for a silly name, and
because a possibly large number of configurations will become clutter,
move them to a subdirectory 'Configurations/', and rename them to
something more expressive, as well as something that sets up some form
of sorting order. Thus:
Configurations -> Configurations/10-main.conf
Configurations.team -> Configurations/90-team.conf
Finally, make sure that Configure sorts the list of files that 'glob'
produces, and adapt Makefile.org.
Reviewed-by: Rich Salz <rsalz@openssl.org>
BIO_debug_callback() no longer assumes the hexadecimal representation of
a pointer fits in 8 characters.
Signed-off-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
Fix security issue where under certain conditions a client can complete a
handshake with an unseeded PRNG. The conditions are:
- Client is on a platform where the PRNG has not been seeded, and the
user has not seeded manually
- A protocol specific client method version has been used (i.e. not
SSL_client_methodv23)
- A ciphersuite is used that does not require additional random data
from the PRNG beyond the initial ClientHello client random
(e.g. PSK-RC4-SHA)
If the handshake succeeds then the client random that has been used will
have been generated from a PRNG with insufficient entropy and therefore
the output may be predictable.
For example using the following command with an unseeded openssl will
succeed on an unpatched platform:
openssl s_client -psk 1a2b3c4d -tls1_2 -cipher PSK-RC4-SHA
CVE-2015-0285
Reviewed-by: Richard Levitte <levitte@openssl.org>
Since commit 741c9959 ("DTLS revision."), we put the wrong protocol
version into our ClientHello for DTLS1_BAD_VER. The old DTLS
code which used ssl->version was replaced by the more generic SSL3 code
which uses ssl->client_version. The Cisco ASA no longer likes our
ClientHello.
RT#3711
Reviewed-by: Rich Salz <rsalz@openssl.org>
Commit 9cf0f187 in HEAD, and 68039af3 in 1.0.2, removed a version check
from dtls1_buffer_message() which was needed to distinguish between DTLS
1.x and Cisco's pre-standard version of DTLS (DTLS1_BAD_VER).
Based on an original patch by David Woodhouse <dwmw2@infradead.org>
RT#3703
Reviewed-by: Tim Hudson <tjh@openssl.org>
New function ASN1_STRING_clear_free which cleanses an ASN1_STRING
structure before freeing it.
Call ASN1_STRING_clear_free on PKCS#8 private key components.
Reviewed-by: Rich Salz <rsalz@openssl.org>
crypto/crypto-lib.com - catch up with the OCSP changes
test/maketest.com and test/tests.com - catch up with the addition of test_evp_extra
Reviewed-by: Rich Salz <rsalz@openssl.org>
This patch uses warning/fatal constants instead of numbers with comments for
warning/alerts in d1_pkt.c and s3_pkt.c
RT#3725
Reviewed-by: Rich Salz <rsalz@openssl.org>
Miscellaneous unchecked malloc fixes. Also fixed some mem leaks on error
paths as I spotted them along the way.
Reviewed-by: Tim Hudson <tjh@openssl.org>
The format script didn't correctly recognise some ASN.1 macros and
didn't reformat some files as a result. Fix script and reformat
affected files.
Reviewed-by: Tim Hudson <tjh@openssl.org>
ACKNOWLEDGEMENTS is now spelled correctly :)
README.ASN1 talked about 0.9.6, so it's deleted.
I turned doc/standards.txt into a set of one-line summaries of RFCs, and
also updated the pointers to original sources (to be web links)
Reviewed-by: Richard Levitte <levitte@openssl.org>
These ciphers are removed:
TLS1_CK_RSA_EXPORT1024_WITH_RC4_56_MD5
TLS1_CK_RSA_EXPORT1024_WITH_RC2_CBC_56_MD5
TLS1_CK_RSA_EXPORT1024_WITH_DES_CBC_SHA
TLS1_CK_DHE_DSS_EXPORT1024_WITH_DES_CBC_SHA
TLS1_CK_RSA_EXPORT1024_WITH_RC4_56_SHA
TLS1_CK_DHE_DSS_EXPORT1024_WITH_RC4_56_SHA
TLS1_CK_DHE_DSS_WITH_RC4_128_SHA
They were defined in a long-expired IETF internet-draft:
draft-ietf-tls-56-bit-ciphersuites-01.txt
Reviewed-by: Richard Levitte <levitte@openssl.org>
Some Cisco appliances use a pre-standard version number for DTLS. We support
this as DTLS1_BAD_VER within the code.
This change fixes d2i_SSL_SESSION for that DTLS version.
Based on an original patch by David Woodhouse <dwmw2@infradead.org>
RT#3704
Reviewed-by: Tim Hudson <tjh@openssl.org>
Add support for skipping disabled algorithms: if an attempt to load a
public or private key results in an unknown algorithm error then any
test using that key is automatically skipped.
Reviewed-by: Tim Hudson <tjh@openssl.org>
When OpenSSL is configured with no-ec, then the new evp_extra_test fails to
pass. This change adds appropriate OPENSSL_NO_EC guards around the code.
Reviewed-by: Tim Hudson <tjh@openssl.org>
NETSCAPE_HANG_BUG is a workaround for a browser bug from many years ago
(2000).
It predates DTLS, so certainly has no place in d1_srvr.c.
In s3_srvr.c it forces the ServerDone to appear in the same record as the
CertificateRequest when doing client auth.
BoringSSL have already made the same commit:
79ae85e4f777f94d91b7be19e8a62016cb55b3c5
Reviewed-by: Tim Hudson <tjh@openssl.org>
Updates to include SHA224, SHA256, SHA384 and SHA512. In particular note
the restriction on setting md to NULL with regards to thread safety.
Reviewed-by: Tim Hudson <tjh@openssl.org>
X509_V_FLAG_NO_ALT_CHAINS flag. Using this option means that when building
certificate chains, the first chain found will be the one used. Without this
flag, if the first chain found is not trusted then we will keep looking to
see if we can build an alternative chain instead.
Reviewed-by: Dr. Stephen Henson <steve@openssl.org>
valid. However the issuer of the leaf, or some intermediate cert is in fact
in the trust store.
When building a trust chain if the first attempt fails, then try to see if
alternate chains could be constructed that are trusted.
RT3637
RT3621
Reviewed-by: Dr. Stephen Henson <steve@openssl.org>
Move the build configuration table into separate files. The Configurations
file is standard configs, and Configurations.team is for openssl-team
members. Any other file, Configurations*, found in the same directory
as the Configure script, is loaded.
To add another file, use --config=FILE flags (which should probably be
an absolute path).
Written by Stefen Eissing <stefan.eissing@greenbytes.de> and Rich Salz
<rsalz@openssl.org>, contributed by Akamai Technologies.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Though this doesn't mean that masm becomes supported, the script is
still provided on don't-ask-in-case-of-doubt-use-nasm basis.
See RT#3650 for background.
Reviewed-by: Matt Caswell <matt@openssl.org>
The previous defaulting to TERMIOS took away -DTERMIOS / -DTERMIO a
bit too enthusiastically. Windows/DOSish platforms of all sorts get
identified as OPENSSL_SYS_MSDOS, and they get a different treatment
altogether UNLESS -DTERMIO or -DTERMIOS is explicitely given with the
configuration. The answer is to restore those macro definitions for
the affected configuration targets.
Reviewed-by: Tim Hudson <tjh@openssl.org>
The rationale for this move is that TERMIOS is default, supported by
POSIX-1.2001, and most definitely on Linux. For a few other systems,
TERMIO may still be the termnial interface of preference, so we keep
-DTERMIO on those in Configure.
crypto/ui/ui_openssl.c is simplified in this regard, and will define
TERMIOS for all systems except a select few exceptions.
Reviewed-by: Matt Caswell <matt@openssl.org>
Many applications require named curve parameter encoding instead of explicit
parameter encoding (including the TLS library in OpenSSL itself). Set this
encoding by default instead of requiring an explicit call to set it.
Add OPENSSL_EC_EXPLICT_CURVE define.
Reviewed-by: Matt Caswell <matt@openssl.org>
Add two new keywords "PublicKey" and "PrivateKey". These will load a key
in PEM format from the lines immediately following the keyword and assign
it a name according to the value. These will be used later for public and
private key testing operations.
Add tests for Sign, Verify, VerifyRecover and Decrypt.
Reviewed-by: Richard Levitte <levitte@openssl.org>
When writing out the hint, if the hint > 0, then we write it out otherwise
we skip it.
Previously when reading the hint back in, if were expecting to see one
(because the ticket length > 0), but it wasn't present then we set the hint
to -1, otherwise we set it to 0. This fails to set the hint to the same as
when it was written out.
The hint should never be negative because the RFC states the hint is
unsigned. It is valid for a server to set the hint to 0 (this means the
lifetime is unspecified according to the RFC). If the server set it to 0, it
should still be 0 when we read it back in.
Reviewed-by: Tim Hudson <tjh@openssl.org>
SSL_SESSION_get_ticket_lifetime_hint. The latter has been reported as
required to fix Qt for OpenSSL 1.1.0. I have also added the former in order
to determine whether a ticket is present or not - otherwise it is difficult
to know whether a zero lifetime hint is because the server set it to 0, or
because there is no ticket.
Reviewed-by: Tim Hudson <tjh@openssl.org>
From RFC4507:
"The ticket_lifetime_hint field contains a hint from the server about how
long the ticket should be stored. The value indicates the lifetime in
seconds as a 32-bit unsigned integer in network byte order."
Reviewed-by: Tim Hudson <tjh@openssl.org>
Specifically, an ASN.1 NumericString in the certificate CN will fail UTF-8 conversion
and result in a negative return value, which the "x509 -checkhost" command-line option
incorrectly interpreted as success.
Also update X509_check_host docs to reflect reality.
Thanks to Sean Burford (Google) for reporting this issue.
Reviewed-by: Richard Levitte <levitte@openssl.org>
In master OPENSSL_NO_DEPRECATED is the default anyway. By including it in
--strict-warnings as well this means you cannot combine enable-deprecated
with --strict-warnings.
Reviewed-by: Tim Hudson <tjh@openssl.org>
Free up bio_err after memory leak data has been printed to it.
In int_free_ex_data if ex_data is NULL there is nothing to free up
so return immediately and don't reallocate it.
Reviewed-by: Tim Hudson <tjh@openssl.org>
There is no mechanism to do that at the moment - SSL_set_bio makes changes
to the wbio even if you pass in SSL_get_wbio().
This commit introduces two new API functions SSL_set_rbio() and
SSL_set_wbio(). These do the same job as SSL_set_bio() except they enable
you to manage the rbio and wbio individually.
Reviewed-by: Tim Hudson <tjh@openssl.org>
I left many "#if 0" lines, usually because I thought we would
probably want to revisit them later, or because they provided
some useful internal documentation tips.
Reviewed-by: Andy Polyakov <appro@openssl.org>
The mkstack.pl script now generates the entire safestack.h file.
It generates output that follows the coding style.
Also, removed all instances of the obsolete IMPLEMENT_STACK_OF
macro.
Reviewed-by: Andy Polyakov <appro@openssl.org>
Disabling HMAC doesn't work. If it did it would end up disabling a lot of
OpenSSL functionality (it is required for all versions of TLS for example).
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
This is an ancient bug workaround for Netscape clients. The documentation
talks about versions 3.x and 4.x beta.
Reviewed-by: Tim Hudson <tjh@openssl.org>
TABLE wasn't updated from a previous Configure change
Missed an RMD160/RIPE/RIPEMD unification in mkdef.pl
Makefile install_sw referenced file doc/openssl-shared.txt (RT3686)
Needed to run 'make update' because
- Various old code has been removed
- Varous old #ifdef tests were removed
Reviewed-by: Richard Levitte <levitte@openssl.org>
Document SSL_get_extms_support().
Modify behaviour of SSL_get_extms_support() so it returns -1 if the
master secret support of the peer is not known (e.g. handshake in progress).
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
Update master secret calculation to support extended master secret.
TLS 1.2 client authentication adds a complication because we need to
cache the handshake messages. This is simpllified however because
the point at which the handshake hashes are calculated for extended
master secret is identical to that required for TLS 1.2 client
authentication (immediately after client key exchange which is also
immediately before certificate verify).
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
Add and retrieve extended master secret extension, setting the flag
SSL_SESS_FLAG_EXTMS appropriately.
Note: this just sets the flag and doesn't include the changes to
master secret generation.
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
Rewrite ssl3_send_client_key_exchange to retain the premaster secret
instead of using it immediately.
This is needed because the premaster secret is used after the client key
exchange message has been sent to compute the extended master secret.
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
Retrieve handshake hashes in a separate function. This tidies the existing
code and will be used for extended master secret generation.
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
Add a "flags" field to SSL_SESSION. This will contain various flags
such as encrypt-then-mac and extended master secret support.
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
Includes VMS fixes from Richard.
Includes Kurt's destest fixes (RT 1290).
Closes tickets 1290 and 1291
Reviewed-by: Kurt Roeckx <kurt@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Keep one #if 0 but rename the symbol to be more descriptive of what
it's doing (you can disable support for old broken Netscape software).
Reviewed-by: Tim Hudson <tjh@openssl.org>
Mostly, but not completely, debugging print statements.
Some old logic kept for internal documentation reasons, perhaps.
Reviewed-by: Richard Levitte <levitte@openssl.org>
on affected platforms (PowerPC and AArch64).
For reference, minimalistic #ifdef GHASH is sufficient, because
it's never defined with OPENSSL_SMALL_FOOTPRINT and ctx->ghash
is never referred.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Making a specific variable $failure_code and a bit of commenting in the
VMS section should help clear things up.
Reviewed-by: Andy Polyakov <appro@openssl.org>
crypto/crypto-lib.com:
Remove all APPS building, as they are gone.
Depend on the variable SDIRS that's defined by makevms.com.
Remake the whole partial module list mechanism to check for variables with a counter.
Define the logical name INTERNAL to allow for '#include "internal/foo.h"'.
makevms.com:
Define SDIRS, to allow for removal of crypto modules and pass that information to crypto/crypto-lib.com.
Allow for experimental modules.
Update the allowed things to disable.
Update the things disabled by default to match Configure.
Update headers to be copied.
Reviewed-by: Andy Polyakov <appro@openssl.org>
catch up with the Unix build.
A number of new tests, among others test/tocsp.com
Define INTERNAL in ssl/ssl-lib.com to allow for '#include "internal/foo.h"'
Reviewed-by: Andy Polyakov <appro@openssl.org>
Add new symbols that are longer than 31 chars to symhacks.
VMS doesn't have <sys/un.h>, reflect that in e_os.h.
MS_CALLBACK has been removed, ssl_task.c needs adjustment.
Reviewed-by: Andy Polyakov <appro@openssl.org>
When you use "-s" in the make flag, you see that engines outputs
a blank line because EDIRS isn't set. This is a debug echo that
isn't needed.
Reviewed-by: Richard Levitte <levitte@openssl.org>
An expired IETF Internet-Draft (seven years old) that nobody
implements, and probably just as good as NSA DRBG work.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Not interested in helping the NSA in the slightest.
And anyway, it was never implemented, #if'd out.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Remove OPENSSL_NO_BUF_FREELISTS. This was turned on by default,
so the work here is removing the 'maintain our own freelist' code.
Also removed a minor old Windows-multibyte/widechar conversion flag.
Reviewed-by: Andy Polyakov <appro@openssl.org>
Remove support for SHA0 and DSS0 (they were broken), and remove
the ability to attempt to build without SHA (it didn't work).
For simplicity, remove the option of not building various SHA algorithms;
you could argue that SHA_224/256/384/512 should be kept, since they're
like crypto algorithms, but I decided to go the other way.
So these options are gone:
GENUINE_DSA OPENSSL_NO_SHA0
OPENSSL_NO_SHA OPENSSL_NO_SHA1
OPENSSL_NO_SHA224 OPENSSL_NO_SHA256
OPENSSL_NO_SHA384 OPENSSL_NO_SHA512
Reviewed-by: Richard Levitte <levitte@openssl.org>
Remove OPENSSL_NO_RFCF3779.
Also, makevms.com was ignored by some of the other cleanups, so
I caught it up. Sorry I ignored you, poor little VMS...
Reviewed-by: Richard Levitte <levitte@openssl.org>
The following compile options (#ifdef's) are removed:
OPENSSL_NO_BIO OPENSSL_NO_BUFFER OPENSSL_NO_CHAIN_VERIFY
OPENSSL_NO_EVP OPENSSL_NO_FIPS_ERR OPENSSL_NO_HASH_COMP
OPENSSL_NO_LHASH OPENSSL_NO_OBJECT OPENSSL_NO_SPEED OPENSSL_NO_STACK
OPENSSL_NO_X509 OPENSSL_NO_X509_VERIFY
This diff is big because of updating the indents on preprocessor lines.
Reviewed-by: Richard Levitte <levitte@openssl.org>
pre-processor controls cleanup. It doesn't mean that it no longer
works on UltraSPARC, only that it doesn't utilize sparcv9-specific
features like branch prediction hints and load in little-endian byte
order anymore. This "costs" ~3% in EDE3 performance regression on
UltraSPARC.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Tim Hudson <tjh@openssl.org>
Per discussion: should not exit. Should not print to stderr.
Errors are ignored. Updated doc to reflect that, and the fact
that this function is to be avoided.
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
This removes all code surrounded by '#ifdef undef'
One case is left: memmove() replaced by open-coded for loop,
in crypto/stack/stack.c That needs further review.
Also removed a couple of instances of /* dead code */ if I saw them
while doing the main removal.
Reviewed-by: Matt Caswell <matt@openssl.org>
If you examine changes, you are likely to wonder "but what about ILP64,
elusive as they are, don't they fall victim to 16-bit rationalization?"
No, the case was modeled and verified to work.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Rename OPENSSL_SYSNAME_xxx to OPENSSL_SYS_xxx
Remove MS_STATIC; it's a relic from platforms <32 bits.
Reviewed-by: Andy Polyakov <appro@openssl.org>
Reviewed-by: Tim Hudson <tjh@openssl.org>
Use setbuf(fp, NULL) instead of setvbuf(). This removes some
ifdef complexity because all of our platforms support setbuf.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Removed CHANGES.SSLeay
Udpate README to be current.
Updated fignerprints.txt to list only current release signers and
to explain that is what it's used for.
Removed the following:
c-indentation.el -- doesn't go with our coding style
openssl-shared.txt -- old info about shared library aides
openssl.txt -- old info about X509v3 extension support/syntax
ssleay.txt -- old info about OpenSSL's predecessor, back when
programmers coded on COBOL sheets by candlelight
Reviewed-by: Richard Levitte <levitte@openssl.org>
BIO_printf(bio_err,"bad input format specified for key\n");
gotoend;
}
if(eckey==NULL)
{
if(eckey==NULL){
BIO_printf(bio_err,"unable to load Key\n");
ERR_print_errors(bio_err);
gotoend;
}
if(outfile==NULL)
{
BIO_set_fp(out,stdout,BIO_NOCLOSE);
#ifdef OPENSSL_SYS_VMS
{
BIO*tmpbio=BIO_new(BIO_f_linebuffer());
out=BIO_push(tmpbio,out);
}
#endif
}
else
{
if(BIO_write_filename(out,outfile)<=0)
{
perror(outfile);
out=bio_open_owner(outfile,outformat,private);
if(out==NULL)
gotoend;
}
}
group=EC_KEY_get0_group(eckey);
@@ -336,72 +251,65 @@ bad:
if(new_asn1_flag)
EC_KEY_set_asn1_flag(eckey,asn1_flag);
if(text)
if(!EC_KEY_print(out,eckey,0))
{
if(no_public)
EC_KEY_set_enc_flags(eckey,EC_PKEY_NO_PUBKEY);
if(text){
assert(pubin||private);
if(!EC_KEY_print(out,eckey,0)){
perror(outfile);
ERR_print_errors(bio_err);
gotoend;
}
}
if(noout)
{
if(check){
if(EC_KEY_check_key(eckey)==1){
BIO_printf(bio_err,"EC Key valid.\n");
}else{
BIO_printf(bio_err,"EC Key Invalid!\n");
ERR_print_errors(bio_err);
}
}
if(noout){
ret=0;
gotoend;
}
BIO_printf(bio_err,"writing EC key\n");
if(outformat==FORMAT_ASN1)
{
if(outformat==FORMAT_ASN1){
if(param_out)
i=i2d_ECPKParameters_bio(out,group);
elseif(pubin||pubout)
i=i2d_EC_PUBKEY_bio(out,eckey);
else
else{
assert(private);
i=i2d_ECPrivateKey_bio(out,eckey);
}
elseif(outformat==FORMAT_PEM)
{
}else{
if(param_out)
i=PEM_write_bio_ECPKParameters(out,group);
elseif(pubin||pubout)
i=PEM_write_bio_EC_PUBKEY(out,eckey);
else
else{
assert(private);
i=PEM_write_bio_ECPrivateKey(out,eckey,enc,
NULL,0,NULL,passout);
}
else
{
BIO_printf(bio_err,"bad output format specified for "
"outfile\n");
gotoend;
}
if(!i)
{
if(!i){
BIO_printf(bio_err,"unable to write private key\n");
ERR_print_errors(bio_err);
}
else
}else
ret=0;
end:
if(in)
BIO_free(in);
if(out)
BIO_free_all(out);
if(eckey)
EC_KEY_free(eckey);
if(passin)
OPENSSL_free(passin);
if(passout)
OPENSSL_free(passout);
apps_shutdown();
OPENSSL_EXIT(ret);
return(ret);
}
#else /* !OPENSSL_NO_EC */
# if PEDANTIC
staticvoid*dummy=&dummy;
# endif
#endif
Some files were not shown because too many files have changed in this diff
Show More
Reference in New Issue
Block a user
Blocking a user prevents them from interacting with repositories, such as opening or commenting on pull requests or issues. Learn more about blocking a user.
