Time for release of OpenSSL 0.9.7.

The tag will be OpenSSL_0_9_7.
My English is definitely not good as my assembly skills:-) And it looks
2002-12-30 23:54:11 +00:00 · 2002-12-30 20:20:25 +00:00 · 2002-12-30 11:08:56 +00:00 · 2002-12-29 23:03:16 +00:00 · 2002-12-29 21:23:43 +00:00 · 2002-12-29 20:58:55 +00:00
520 changed files with 16697 additions and 6702 deletions
--- a/.cvsignore
+++ b/.cvsignore
@@ -1,3 +1,4 @@
+openssl.pc
 Makefile.ssl
 MINFO
 makefile.one
--- a/251
+++ b/251
@@ -2,7 +2,156 @@
 OpenSSL CHANGES
 _______________

- Changes between 0.9.6e and 0.9.7  [XX xxx 2002]
+ Changes between 0.9.6h and 0.9.7  [31 Dec 2002]
+
+  *) Fix session ID handling in SSLv2 client code: the SERVER FINISHED
+     code (06) was taken as the first octet of the session ID and the last
+     octet was ignored consequently. As a result SSLv2 client side session
+     caching could not have worked due to the session ID mismatch between
+     client and server.
+     Behaviour observed by Crispin Flowerday <crispin@flowerday.cx> as
+     PR #377.
+     [Lutz Jaenicke]
+
+  *) Change the declaration of needed Kerberos libraries to use EX_LIBS
+     instead of the special (and badly supported) LIBKRB5.  LIBKRB5 is
+     removed entirely.
+     [Richard Levitte]
+
+  *) The hw_ncipher.c engine requires dynamic locks.  Unfortunately, it
+     seems that in spite of existing for more than a year, many application
+     author have done nothing to provide the necessary callbacks, which
+     means that this particular engine will not work properly anywhere.
+     This is a very unfortunate situation which forces us, in the name
+     of usability, to give the hw_ncipher.c a static lock, which is part
+     of libcrypto.
+     NOTE: This is for the 0.9.7 series ONLY.  This hack will never
+     appear in 0.9.8 or later.  We EXPECT application authors to have
+     dealt properly with this when 0.9.8 is released (unless we actually
+     make such changes in the libcrypto locking code that changes will
+     have to be made anyway).
+     [Richard Levitte]
+
+  *) In asn1_d2i_read_bio() repeatedly call BIO_read() until all content
+     octets have been read, EOF or an error occurs. Without this change
+     some truncated ASN1 structures will not produce an error.
+     [Steve Henson]
+
+  *) Disable Heimdal support, since it hasn't been fully implemented.
+     Still give the possibility to force the use of Heimdal, but with
+     warnings and a request that patches get sent to openssl-dev.
+     [Richard Levitte]
+
+  *) Add the VC-CE target, introduce the WINCE sysname, and add
+     INSTALL.WCE and appropriate conditionals to make it build.
+     [Steven Reddie <smr@essemer.com.au> via Richard Levitte]
+
+  *) Change the DLL names for Cygwin to cygcrypto-x.y.z.dll and
+     cygssl-x.y.z.dll, where x, y and z are the major, minor and
+     edit numbers of the version.
+     [Corinna Vinschen <vinschen@redhat.com> and Richard Levitte]
+
+  *) Introduce safe string copy and catenation functions
+     (BUF_strlcpy() and BUF_strlcat()).
+     [Ben Laurie (CHATS) and Richard Levitte]
+
+  *) Avoid using fixed-size buffers for one-line DNs.
+     [Ben Laurie (CHATS)]
+
+  *) Add BUF_MEM_grow_clean() to avoid information leakage when
+     resizing buffers containing secrets, and use where appropriate.
+     [Ben Laurie (CHATS)]
+
+  *) Avoid using fixed size buffers for configuration file location.
+     [Ben Laurie (CHATS)]
+
+  *) Avoid filename truncation for various CA files.
+     [Ben Laurie (CHATS)]
+
+  *) Use sizeof in preference to magic numbers.
+     [Ben Laurie (CHATS)]
+
+  *) Avoid filename truncation in cert requests.
+     [Ben Laurie (CHATS)]
+
+  *) Add assertions to check for (supposedly impossible) buffer
+     overflows.
+     [Ben Laurie (CHATS)]
+
+  *) Don't cache truncated DNS entries in the local cache (this could
+     potentially lead to a spoofing attack).
+     [Ben Laurie (CHATS)]
+
+  *) Fix various buffers to be large enough for hex/decimal
+     representations in a platform independent manner.
+     [Ben Laurie (CHATS)]
+
+  *) Add CRYPTO_realloc_clean() to avoid information leakage when
+     resizing buffers containing secrets, and use where appropriate.
+     [Ben Laurie (CHATS)]
+
+  *) Add BIO_indent() to avoid much slightly worrying code to do
+     indents.
+     [Ben Laurie (CHATS)]
+
+  *) Convert sprintf()/BIO_puts() to BIO_printf().
+     [Ben Laurie (CHATS)]
+
+  *) buffer_gets() could terminate with the buffer only half
+     full. Fixed.
+     [Ben Laurie (CHATS)]
+
+  *) Add assertions to prevent user-supplied crypto functions from
+     overflowing internal buffers by having large block sizes, etc.
+     [Ben Laurie (CHATS)]
+
+  *) New OPENSSL_assert() macro (similar to assert(), but enabled
+     unconditionally).
+     [Ben Laurie (CHATS)]
+
+  *) Eliminate unused copy of key in RC4.
+     [Ben Laurie (CHATS)]
+
+  *) Eliminate unused and incorrectly sized buffers for IV in pem.h.
+     [Ben Laurie (CHATS)]
+
+  *) Fix off-by-one error in EGD path.
+     [Ben Laurie (CHATS)]
+
+  *) If RANDFILE path is too long, ignore instead of truncating.
+     [Ben Laurie (CHATS)]
+
+  *) Eliminate unused and incorrectly sized X.509 structure
+     CBCParameter.
+     [Ben Laurie (CHATS)]
+
+  *) Eliminate unused and dangerous function knumber().
+     [Ben Laurie (CHATS)]
+
+  *) Eliminate unused and dangerous structure, KSSL_ERR.
+     [Ben Laurie (CHATS)]
+
+  *) Protect against overlong session ID context length in an encoded
+     session object. Since these are local, this does not appear to be
+     exploitable.
+     [Ben Laurie (CHATS)]
+
+  *) Change from security patch (see 0.9.6e below) that did not affect
+     the 0.9.6 release series:
+
+     Remote buffer overflow in SSL3 protocol - an attacker could
+     supply an oversized master key in Kerberos-enabled versions.
+     (CAN-2002-0657)
+     [Ben Laurie (CHATS)]
+
+  *) Change the SSL kerb5 codes to match RFC 2712.
+     [Richard Levitte]
+
+  *) Make -nameopt work fully for req and add -reqopt switch.
+     [Michael Bell <michael.bell@rz.hu-berlin.de>, Steve Henson]
+
+  *) The "block size" for block ciphers in CFB and OFB mode should be 1.
+     [Steve Henson, reported by Yngve Nysaeter Pettersen <yngve@opera.com>]

  *) Make sure tests can be performed even if the corresponding algorithms
     have been removed entirely.  This was also the last step to make
@@ -1667,6 +1816,94 @@ des-cbc           3624.96k     5258.21k     5530.91k     5624.30k     5628.26k
  *) Clean old EAY MD5 hack from e_os.h.
     [Richard Levitte]

+ Changes between 0.9.6g and 0.9.6h  [5 Dec 2002]
+
+  *) New function OPENSSL_cleanse(), which is used to cleanse a section of
+     memory from it's contents.  This is done with a counter that will
+     place alternating values in each byte.  This can be used to solve
+     two issues: 1) the removal of calls to memset() by highly optimizing
+     compilers, and 2) cleansing with other values than 0, since those can
+     be read through on certain media, for example a swap space on disk.
+     [Geoff Thorpe]
+
+  *) Bugfix: client side session caching did not work with external caching,
+     because the session->cipher setting was not restored when reloading
+     from the external cache. This problem was masked, when
+     SSL_OP_NETSCAPE_REUSE_CIPHER_CHANGE_BUG (part of SSL_OP_ALL) was set.
+     (Found by Steve Haslam <steve@araqnid.ddts.net>.)
+     [Lutz Jaenicke]
+
+  *) Fix client_certificate (ssl/s2_clnt.c): The permissible total
+     length of the REQUEST-CERTIFICATE message is 18 .. 34, not 17 .. 33.
+     [Zeev Lieber <zeev-l@yahoo.com>]
+
+  *) Undo an undocumented change introduced in 0.9.6e which caused
+     repeated calls to OpenSSL_add_all_ciphers() and 
+     OpenSSL_add_all_digests() to be ignored, even after calling
+     EVP_cleanup().
+     [Richard Levitte]
+
+  *) Change the default configuration reader to deal with last line not
+     being properly terminated.
+     [Richard Levitte]
+
+  *) Change X509_NAME_cmp() so it applies the special rules on handling
+     DN values that are of type PrintableString, as well as RDNs of type
+     emailAddress where the value has the type ia5String.
+     [stefank@valicert.com via Richard Levitte]
+
+  *) Add a SSL_SESS_CACHE_NO_INTERNAL_STORE flag to take over half
+     the job SSL_SESS_CACHE_NO_INTERNAL_LOOKUP was inconsistently
+     doing, define a new flag (SSL_SESS_CACHE_NO_INTERNAL) to be
+     the bitwise-OR of the two for use by the majority of applications
+     wanting this behaviour, and update the docs. The documented
+     behaviour and actual behaviour were inconsistent and had been
+     changing anyway, so this is more a bug-fix than a behavioural
+     change.
+     [Geoff Thorpe, diagnosed by Nadav Har'El]
+
+  *) Don't impose a 16-byte length minimum on session IDs in ssl/s3_clnt.c
+     (the SSL 3.0 and TLS 1.0 specifications allow any length up to 32 bytes).
+     [Bodo Moeller]
+
+  *) Fix initialization code race conditions in
+        SSLv23_method(),  SSLv23_client_method(),   SSLv23_server_method(),
+        SSLv2_method(),   SSLv2_client_method(),    SSLv2_server_method(),
+        SSLv3_method(),   SSLv3_client_method(),    SSLv3_server_method(),
+        TLSv1_method(),   TLSv1_client_method(),    TLSv1_server_method(),
+        ssl2_get_cipher_by_char(),
+        ssl3_get_cipher_by_char().
+     [Patrick McCormick <patrick@tellme.com>, Bodo Moeller]
+
+  *) Reorder cleanup sequence in SSL_CTX_free(): only remove the ex_data after
+     the cached sessions are flushed, as the remove_cb() might use ex_data
+     contents. Bug found by Sam Varshavchik <mrsam@courier-mta.com>
+     (see [openssl.org #212]).
+     [Geoff Thorpe, Lutz Jaenicke]
+
+  *) Fix typo in OBJ_txt2obj which incorrectly passed the content
+     length, instead of the encoding length to d2i_ASN1_OBJECT.
+     [Steve Henson]
+
+ Changes between 0.9.6f and 0.9.6g  [9 Aug 2002]
+
+  *) [In 0.9.6g-engine release:]
+     Fix crypto/engine/vendor_defns/cswift.h for WIN32 (use '_stdcall').
+     [Lynn Gazis <lgazis@rainbow.com>]
+
+ Changes between 0.9.6e and 0.9.6f  [8 Aug 2002]
+
+  *) Fix ASN1 checks. Check for overflow by comparing with LONG_MAX
+     and get fix the header length calculation.
+     [Florian Weimer <Weimer@CERT.Uni-Stuttgart.DE>,
+	Alon Kantor <alonk@checkpoint.com> (and others),
+	Steve Henson]
+
+  *) Use proper error handling instead of 'assertions' in buffer
+     overflow checks added in 0.9.6e.  This prevents DoS (the
+     assertions could call abort()).
+     [Arne Ansper <arne@ats.cyber.ee>, Bodo Moeller]
+
 Changes between 0.9.6d and 0.9.6e  [30 Jul 2002]

  *) Add various sanity checks to asn1_get_length() to reject
@@ -1717,11 +1954,6 @@ des-cbc           3624.96k     5258.21k     5530.91k     5624.30k     5628.26k
     too small for 64 bit platforms. (CAN-2002-0655)
     [Matthew Byng-Maddick <mbm@aldigital.co.uk> and Ben Laurie (CHATS)>

-  *) Remote buffer overflow in SSL3 protocol - an attacker could
-     supply an oversized master key in Kerberos-enabled versions.
-     (CAN-2002-0657)
-     [Ben Laurie (CHATS)]
-
  *) Remote buffer overflow in SSL3 protocol - an attacker could
     supply an oversized session ID to a client. (CAN-2002-0656)
     [Ben Laurie (CHATS)]
@@ -1730,7 +1962,6 @@ des-cbc           3624.96k     5258.21k     5530.91k     5624.30k     5628.26k
     supply an oversized client master key. (CAN-2002-0656)
     [Ben Laurie (CHATS)]

-
 Changes between 0.9.6c and 0.9.6d  [9 May 2002]

  *) Fix crypto/asn1/a_sign.c so that 'parameters' is omitted (not
@@ -1817,13 +2048,13 @@ des-cbc           3624.96k     5258.21k     5530.91k     5624.30k     5628.26k
     value is 0.
     [Richard Levitte]

-  *) Add the configuration target linux-s390x.
-     [Neale Ferguson <Neale.Ferguson@SoftwareAG-USA.com> via Richard Levitte]
-
  *) [In 0.9.6d-engine release:]
     Fix a crashbug and a logic bug in hwcrhk_load_pubkey().
     [Toomas Kiisk <vix@cyber.ee> via Richard Levitte]

+  *) Add the configuration target linux-s390x.
+     [Neale Ferguson <Neale.Ferguson@SoftwareAG-USA.com> via Richard Levitte]
+
  *) The earlier bugfix for the SSL3_ST_SW_HELLO_REQ_C case of
     ssl3_accept (ssl/s3_srvr.c) incorrectly used a local flag
     variable as an indication that a ClientHello message has been
--- a/117
+++ b/117
@@ -120,7 +120,7 @@ my $alpha_asm="::::::::";
 # -DB_ENDIAN slows things down on a sparc for md5, but helps sha1.
 # So the md5_locl.h file has an undef B_ENDIAN if sun is defined

-#config-string	$cc : $cflags : $unistd : $thread_cflag : $sys_id : $lflags : $bn_ops : $bn_obj : $des_obj : $bf_obj : $md5_obj : $sha1_obj : $cast_obj : $rc4_obj : $rmd160_obj : $rc5_obj : $dso_scheme : $shared_target : $shared_cflag : $shared_ldflag : $shared_extension : $ranlib
+#config-string	$cc : $cflags : $unistd : $thread_cflag : $sys_id : $lflags : $bn_ops : $bn_obj : $des_obj : $bf_obj : $md5_obj : $sha1_obj : $cast_obj : $rc4_obj : $rmd160_obj : $rc5_obj : $dso_scheme : $shared_target : $shared_cflag : $shared_ldflag : $shared_extension : $ranlib : $arflags

 my %table=(
 # File 'TABLE' (created by 'make TABLE') contains the data from this list,
@@ -145,8 +145,10 @@ my %table=(
 "debug-ulf",	"gcc:-DL_ENDIAN -DREF_CHECK -DCONF_DEBUG -DBN_DEBUG -DBN_CTX_DEBUG -DCRYPTO_MDEBUG_ALL -g -O2 -m486 -Wall -Werror -Wshadow -pipe::-D_REENTRANT:::${x86_gcc_des} ${x86_gcc_opts}:${x86_elf_asm}",
 "debug-steve",	"gcc:-DL_ENDIAN -DREF_CHECK -DCONF_DEBUG -DBN_CTX_DEBUG -DDEBUG_SAFESTACK -DCRYPTO_MDEBUG_ALL -DPEDANTIC -g -mcpu=i486 -pedantic -Wall -Werror -Wshadow -pipe::-D_REENTRANT::-rdynamic -ldl:${x86_gcc_des} ${x86_gcc_opts}:${x86_elf_asm}:dlfcn",
 "debug-steve-linux-pseudo64",	"gcc:-DL_ENDIAN -DREF_CHECK -DCONF_DEBUG -DBN_CTX_DEBUG -DDEBUG_SAFESTACK -DCRYPTO_MDEBUG_ALL -DOPENSSL_NO_ASM -g -mcpu=i486 -Wall -Werror -Wshadow -pipe::-D_REENTRANT::-rdynamic -ldl:SIXTY_FOUR_BIT::dlfcn",
-"debug-levitte-linux-elf","gcc:-DLEVITTE_DEBUG -DREF_CHECK -DCONF_DEBUG -DBN_CTX_DEBUG -DCRYPTO_MDEBUG -DL_ENDIAN -DTERMIO -D_POSIX_SOURCE -DPEDANTIC -ggdb -g3 -mcpu=i486 -pedantic -ansi -Wall -W -Wundef -Wshadow -Wid-clash-31 -Wcast-align -Wconversion -Wno-long-long -pipe::-D_REENTRANT::-ldl:BN_LLONG ${x86_gcc_des} ${x86_gcc_opts}:${x86_elf_asm}:dlfcn:linux-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
-"debug-levitte-linux-noasm","gcc:-DLEVITTE_DEBUG -DREF_CHECK -DCONF_DEBUG -DBN_CTX_DEBUG -DCRYPTO_MDEBUG -DOPENSSL_NO_ASM -DL_ENDIAN -DTERMIO -D_POSIX_SOURCE -DPEDANTIC -ggdb -g3 -mcpu=i486 -pedantic -ansi -Wall -W -Wundef -Wshadow -Wid-clash-31 -Wcast-align -Wconversion -Wno-long-long -pipe::-D_REENTRANT::-ldl:BN_LLONG ${x86_gcc_des} ${x86_gcc_opts}::::::::::dlfcn:linux-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
+"debug-levitte-linux-elf","gcc:-DLEVITTE_DEBUG -DREF_CHECK -DCONF_DEBUG -DBN_CTX_DEBUG -DCRYPTO_MDEBUG -DL_ENDIAN -DTERMIO -D_POSIX_SOURCE -DPEDANTIC -ggdb -g3 -mcpu=i486 -pedantic -ansi -Wall -Wshadow -Wcast-align -Wstrict-prototypes -Wmissing-prototypes -Wno-long-long -pipe::-D_REENTRANT::-ldl:BN_LLONG ${x86_gcc_des} ${x86_gcc_opts}:${x86_elf_asm}:dlfcn:linux-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
+"debug-levitte-linux-noasm","gcc:-DLEVITTE_DEBUG -DREF_CHECK -DCONF_DEBUG -DBN_CTX_DEBUG -DCRYPTO_MDEBUG -DOPENSSL_NO_ASM -DL_ENDIAN -DTERMIO -D_POSIX_SOURCE -DPEDANTIC -ggdb -g3 -mcpu=i486 -pedantic -ansi -Wall -Wshadow -Wcast-align -Wstrict-prototypes -Wmissing-prototypes -Wno-long-long -pipe::-D_REENTRANT::-ldl:BN_LLONG ${x86_gcc_des} ${x86_gcc_opts}::::::::::dlfcn:linux-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
+"debug-levitte-linux-elf-extreme","gcc:-DLEVITTE_DEBUG -DREF_CHECK -DCONF_DEBUG -DBN_CTX_DEBUG -DCRYPTO_MDEBUG -DL_ENDIAN -DTERMIO -D_POSIX_SOURCE -DPEDANTIC -ggdb -g3 -mcpu=i486 -pedantic -ansi -Wall -W -Wundef -Wshadow -Wcast-align -Wstrict-prototypes -Wmissing-prototypes -Wconversion -Wno-long-long -pipe::-D_REENTRANT::-ldl:BN_LLONG ${x86_gcc_des} ${x86_gcc_opts}:${x86_elf_asm}:dlfcn:linux-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
+"debug-levitte-linux-noasm-extreme","gcc:-DLEVITTE_DEBUG -DREF_CHECK -DCONF_DEBUG -DBN_CTX_DEBUG -DCRYPTO_MDEBUG -DOPENSSL_NO_ASM -DL_ENDIAN -DTERMIO -D_POSIX_SOURCE -DPEDANTIC -ggdb -g3 -mcpu=i486 -pedantic -ansi -Wall -W -Wundef -Wshadow -Wcast-align -Wstrict-prototypes -Wmissing-prototypes -Wconversion -Wno-long-long -pipe::-D_REENTRANT::-ldl:BN_LLONG ${x86_gcc_des} ${x86_gcc_opts}::::::::::dlfcn:linux-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
 "dist",		"cc:-O::(unknown)::::::",

 # Basic configs that should work on any (32 and less bit) box
@@ -159,25 +161,25 @@ my %table=(
 # surrounds it with #APP #NO_APP comment pair which (at least Solaris
 # 7_x86) /usr/ccs/bin/as fails to assemble with "Illegal mnemonic"
 # error message.
-"solaris-x86-gcc","gcc:-O3 -fomit-frame-pointer -m486 -Wall -DL_ENDIAN -DOPENSSL_NO_INLINE_ASM::-D_REENTRANT::-lsocket -lnsl -ldl:BN_LLONG ${x86_gcc_des} ${x86_gcc_opts}:${x86_sol_asm}:dlfcn:solaris-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
+"solaris-x86-gcc","gcc:-O3 -fomit-frame-pointer -m486 -Wall -DL_ENDIAN -DOPENSSL_NO_INLINE_ASM::-D_REENTRANT::-lsocket -lnsl -ldl:BN_LLONG ${x86_gcc_des} ${x86_gcc_opts}:${x86_sol_asm}:dlfcn:solaris-shared:-fPIC:-shared:.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",

 #### Solaris x86 with Sun C setups
 "solaris-x86-cc","cc:-fast -O -Xa::-D_REENTRANT::-lsocket -lnsl -ldl:BN_LLONG RC4_CHAR RC4_CHUNK DES_PTR DES_UNROLL BF_PTR::::::::::dlfcn:solaris-shared:-KPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",

 #### SPARC Solaris with GNU C setups
-"solaris-sparcv7-gcc","gcc:-O3 -fomit-frame-pointer -Wall -DB_ENDIAN -DBN_DIV2W::-D_REENTRANT::-lsocket -lnsl -ldl:BN_LLONG RC4_CHAR RC4_CHUNK DES_UNROLL BF_PTR::::::::::dlfcn:solaris-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
-"solaris-sparcv8-gcc","gcc:-mv8 -O3 -fomit-frame-pointer -Wall -DB_ENDIAN -DBN_DIV2W::-D_REENTRANT::-lsocket -lnsl -ldl:BN_LLONG RC4_CHAR RC4_CHUNK DES_UNROLL BF_PTR:asm/sparcv8.o:::::::::dlfcn:solaris-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
+"solaris-sparcv7-gcc","gcc:-O3 -fomit-frame-pointer -Wall -DB_ENDIAN -DBN_DIV2W::-D_REENTRANT::-lsocket -lnsl -ldl:BN_LLONG RC4_CHAR RC4_CHUNK DES_UNROLL BF_PTR::::::::::dlfcn:solaris-shared:-fPIC:-shared:.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
+"solaris-sparcv8-gcc","gcc:-mv8 -O3 -fomit-frame-pointer -Wall -DB_ENDIAN -DBN_DIV2W::-D_REENTRANT::-lsocket -lnsl -ldl:BN_LLONG RC4_CHAR RC4_CHUNK DES_UNROLL BF_PTR:asm/sparcv8.o:::::::::dlfcn:solaris-shared:-fPIC:-shared:.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
 # -m32 should be safe to add as long as driver recognizes -mcpu=ultrasparc
-"solaris-sparcv9-gcc","gcc:-m32 -mcpu=ultrasparc -O3 -fomit-frame-pointer -Wall -DB_ENDIAN -DBN_DIV2W::-D_REENTRANT:ULTRASPARC:-lsocket -lnsl -ldl:BN_LLONG RC4_CHAR RC4_CHUNK DES_UNROLL BF_PTR:asm/sparcv8plus.o:::asm/md5-sparcv8plus.o::::::dlfcn:solaris-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
-"solaris64-sparcv9-gcc31","gcc:-mcpu=ultrasparc -m64 -O3 -fomit-frame-pointer -Wall -DB_ENDIAN::-D_REENTRANT:ULTRASPARC:-lsocket -lnsl -ldl:SIXTY_FOUR_BIT_LONG RC4_CHAR RC4_CHUNK DES_INT DES_PTR DES_RISC1 DES_UNROLL BF_PTR::::asm/md5-sparcv9.o::::::dlfcn:solaris-shared:-fPIC:-m64:.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
+"solaris-sparcv9-gcc","gcc:-m32 -mcpu=ultrasparc -O3 -fomit-frame-pointer -Wall -DB_ENDIAN -DBN_DIV2W::-D_REENTRANT:ULTRASPARC:-lsocket -lnsl -ldl:BN_LLONG RC4_CHAR RC4_CHUNK DES_UNROLL BF_PTR:asm/sparcv8plus.o:::asm/md5-sparcv8plus.o::::::dlfcn:solaris-shared:-fPIC:-shared:.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
+"solaris64-sparcv9-gcc31","gcc:-mcpu=ultrasparc -m64 -O3 -fomit-frame-pointer -Wall -DB_ENDIAN::-D_REENTRANT:ULTRASPARC:-lsocket -lnsl -ldl:SIXTY_FOUR_BIT_LONG RC4_CHAR RC4_CHUNK DES_INT DES_PTR DES_RISC1 DES_UNROLL BF_PTR::::asm/md5-sparcv9.o::::::dlfcn:solaris-shared:-fPIC:-m64 -shared:.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
 # gcc pre-2.8 doesn't understand -mcpu=ultrasparc, so fall down to -mv8
 # but keep the assembler modules.
-"solaris-sparcv9-gcc27","gcc:-mv8 -O3 -fomit-frame-pointer -Wall -DB_ENDIAN -DBN_DIV2W::-D_REENTRANT:ULTRASPARC:-lsocket -lnsl -ldl:BN_LLONG RC4_CHAR RC4_CHUNK DES_UNROLL BF_PTR:asm/sparcv8plus-gcc27.o:::asm/md5-sparcv8plus-gcc27.o::::::dlfcn:solaris-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
-"solaris64-sparcv9-gcc","gcc:-m64 -mcpu=ultrasparc -O3 -Wall -DB_ENDIAN::-D_REENTRANT:ULTRASPARC:-lsocket -lnsl -ldl:SIXTY_FOUR_BIT_LONG RC4_CHAR RC4_CHUNK DES_INT DES_PTR DES_RISC1 DES_UNROLL BF_PTR::::asm/md5-sparcv9.o::::::dlfcn:solaris-shared:-fPIC:-m64:.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
+"solaris-sparcv9-gcc27","gcc:-mv8 -O3 -fomit-frame-pointer -Wall -DB_ENDIAN -DBN_DIV2W::-D_REENTRANT:ULTRASPARC:-lsocket -lnsl -ldl:BN_LLONG RC4_CHAR RC4_CHUNK DES_UNROLL BF_PTR:asm/sparcv8plus-gcc27.o:::asm/md5-sparcv8plus-gcc27.o::::::dlfcn:solaris-shared:-fPIC:-shared:.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
+"solaris64-sparcv9-gcc","gcc:-m64 -mcpu=ultrasparc -O3 -Wall -DB_ENDIAN::-D_REENTRANT:ULTRASPARC:-lsocket -lnsl -ldl:SIXTY_FOUR_BIT_LONG RC4_CHAR RC4_CHUNK DES_INT DES_PTR DES_RISC1 DES_UNROLL BF_PTR::::asm/md5-sparcv9.o::::::dlfcn:solaris-shared:-fPIC:-m64 -shared:.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",

 ####
-"debug-solaris-sparcv8-gcc","gcc:-DBN_DEBUG -DREF_CHECK -DCONF_DEBUG -DBN_CTX_DEBUG -DCRYPTO_MDEBUG_ALL -O -g -mv8 -Wall -DB_ENDIAN::-D_REENTRANT::-lsocket -lnsl -ldl:BN_LLONG RC4_CHAR RC4_CHUNK DES_UNROLL BF_PTR:asm/sparcv8.o:::::::::dlfcn:solaris-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
-"debug-solaris-sparcv9-gcc","gcc:-DBN_DEBUG -DREF_CHECK -DCONF_DEBUG -DBN_CTX_DEBUG -DCRYPTO_MDEBUG_ALL -O -g -mcpu=ultrasparc -Wall -DB_ENDIAN::-D_REENTRANT::-lsocket -lnsl -ldl:BN_LLONG RC4_CHAR RC4_CHUNK DES_UNROLL BF_PTR:asm/sparcv8plus.o:::::::::dlfcn:solaris-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
+"debug-solaris-sparcv8-gcc","gcc:-DBN_DEBUG -DREF_CHECK -DCONF_DEBUG -DBN_CTX_DEBUG -DCRYPTO_MDEBUG_ALL -O -g -mv8 -Wall -DB_ENDIAN::-D_REENTRANT::-lsocket -lnsl -ldl:BN_LLONG RC4_CHAR RC4_CHUNK DES_UNROLL BF_PTR:asm/sparcv8.o:::::::::dlfcn:solaris-shared:-fPIC:-shared:.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
+"debug-solaris-sparcv9-gcc","gcc:-DBN_DEBUG -DREF_CHECK -DCONF_DEBUG -DBN_CTX_DEBUG -DCRYPTO_MDEBUG_ALL -O -g -mcpu=ultrasparc -Wall -DB_ENDIAN::-D_REENTRANT::-lsocket -lnsl -ldl:BN_LLONG RC4_CHAR RC4_CHUNK DES_UNROLL BF_PTR:asm/sparcv8plus.o:::::::::dlfcn:solaris-shared:-fPIC:-shared:.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",

 #### SPARC Solaris with Sun C setups
 # DO NOT use /xO[34] on sparc with SC3.0.  It is broken, and will not pass the tests
@@ -201,13 +203,12 @@ my %table=(
 # it's a real mess with -mcpu=ultrasparc option under Linux, but
 # -Wa,-Av8plus should do the trick no matter what.
 "linux-sparcv9","gcc:-mcpu=ultrasparc -DB_ENDIAN -DTERMIO -O3 -fomit-frame-pointer -Wall -Wa,-Av8plus -DBN_DIV2W::-D_REENTRANT:ULTRASPARC:-ldl:BN_LLONG RC4_CHAR RC4_CHUNK DES_UNROLL BF_PTR:asm/sparcv8plus.o:::asm/md5-sparcv8plus.o::::::dlfcn:linux-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
-# !!!Folowing can't be even tested yet!!!
-#    We have to wait till 64-bit glibc for SPARC is operational!!!
-#"linux64-sparcv9","sparc64-linux-gcc:-m64 -mcpu=v9 -DB_ENDIAN -DTERMIO -O3 -fomit-frame-pointer -Wall -DBN_DIV2W::-D_REENTRANT:ULTRASPARC::BN_LLONG RC4_CHAR RC4_CHUNK DES_UNROLL BF_PTR::::asm/md5-sparcv9.o:",
+# GCC 3.1 is a requirement
+"linux64-sparcv9","gcc:-m64 -mcpu=ultrasparc -DB_ENDIAN -DTERMIO -O3 -fomit-frame-pointer -Wall::-D_REENTRANT:ULTRASPARC:-ldl:SIXTY_FOUR_BIT_LONG RC4_CHAR RC4_CHUNK DES_UNROLL BF_PTR::::asm/md5-sparcv9.o::::::dlfcn:linux-shared:-fPIC:-m64:.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",

 # Sunos configs, assuming sparc for the gcc one.
-##"sunos-cc", "cc:-O4 -DNOPROTO -DNOCONST::(unknown):::DES_UNROLL:::",
-"sunos-gcc","gcc:-O3 -mv8 -Dssize_t=int::(unknown):::BN_LLONG RC4_CHAR RC4_CHUNK DES_UNROLL DES_PTR DES_RISC1:::",
+##"sunos-cc", "cc:-O4 -DNOPROTO -DNOCONST::(unknown):SUNOS::DES_UNROLL:::",
+"sunos-gcc","gcc:-O3 -mv8 -Dssize_t=int::(unknown):SUNOS::BN_LLONG RC4_CHAR RC4_CHUNK DES_UNROLL DES_PTR DES_RISC1:::",

 #### IRIX 5.x configs
 # -mips2 flag is added by ./config when appropriate.
@@ -387,9 +388,10 @@ my %table=(
 "linux-mips",   "gcc:-DB_ENDIAN -DTERMIO -O3 -fomit-frame-pointer -Wall::(unknown):::BN_LLONG:::",
 "linux-ppc",    "gcc:-DB_ENDIAN -DTERMIO -O3 -fomit-frame-pointer -Wall::-D_REENTRANT::-ldl:BN_LLONG RC4_CHAR RC4_CHUNK DES_RISC1 DES_UNROLL::::::::::dlfcn:linux-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
 "linux-m68k",   "gcc:-DB_ENDIAN -DTERMIO -O2 -fomit-frame-pointer -Wall::-D_REENTRANT:::BN_LLONG::",
-"linux-s390",	"gcc:-DB_ENDIAN -DTERMIO -O3 -fomit-frame-pointer -Wall::-D_REENTRANT:::BN_LLONG::",
-"linux-s390x", "gcc:-DB_ENDIAN -DTERMIO -DNO_ASM -O3 -fomit-frame-pointer -Wall::-D_REENTRANT:::SIXTY_FOUR_BIT_LONG:::::::::::linux-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
+"linux-s390",	"gcc:-DB_ENDIAN -DTERMIO -DNO_ASM -O3 -fomit-frame-pointer -Wall::-D_REENTRANT::-ldl:BN_LLONG::::::::::dlfcn:linux-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
+"linux-s390x",	"gcc:-DB_ENDIAN -DTERMIO -DNO_ASM -O3 -fomit-frame-pointer -Wall::-D_REENTRANT::-ldl:SIXTY_FOUR_BIT_LONG::::::::::dlfcn:linux-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
 "linux-ia64",   "gcc:-DL_ENDIAN -DTERMIO -O3 -fomit-frame-pointer -Wall::-D_REENTRANT::-ldl:SIXTY_FOUR_BIT_LONG RC4_CHUNK RC4_CHAR:asm/ia64.o:::::::::dlfcn:linux-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
+"linux-x86_64", "gcc:-m64 -DL_ENDIAN -DTERMIO -O3 -Wall -DMD32_REG_T=int::-D_REENTRANT::-ldl:SIXTY_FOUR_BIT_LONG RC4_CHUNK RC4_CHAR BF_PTR2 DES_INT DES_UNROLL:asm/x86_64-gcc.o:::::::::dlfcn:linux-shared:-fPIC:-m64:.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
 "NetBSD-sparc",	"gcc:-DTERMIOS -O3 -fomit-frame-pointer -mv8 -Wall -DB_ENDIAN::(unknown):::BN_LLONG MD2_CHAR RC4_INDEX DES_UNROLL::::::::::dlfcn:bsd-gcc-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
 "NetBSD-m68",	"gcc:-DTERMIOS -O3 -fomit-frame-pointer -Wall -DB_ENDIAN::(unknown):::BN_LLONG MD2_CHAR RC4_INDEX DES_UNROLL::::::::::dlfcn:bsd-gcc-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
 "NetBSD-x86",	"gcc:-DTERMIOS -O3 -fomit-frame-pointer -m486 -Wall::(unknown):::BN_LLONG ${x86_gcc_des} ${x86_gcc_opts}::::::::::dlfcn:bsd-gcc-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
@@ -437,7 +439,8 @@ my %table=(
 "aix-cc",   "cc:-O -DB_ENDIAN -qmaxmem=16384::(unknown):AIX::BN_LLONG RC4_CHAR:::",
 "aix-gcc",  "gcc:-O3 -DB_ENDIAN::(unknown):AIX::BN_LLONG RC4_CHAR:::",
 "aix43-cc",   "cc:-O -DAIX -DB_ENDIAN -qmaxmem=16384::(unknown):::BN_LLONG RC4_CHAR::::::::::dlfcn:",
-"aix43-gcc",  "gcc:-O3 -DAIX -DB_ENDIAN::(unknown):::BN_LLONG RC4_CHAR::::::::::dlfcn:",
+"aix43-gcc",  "gcc:-O1 -DAIX -DB_ENDIAN::(unknown):::BN_LLONG RC4_CHAR::::::::::dlfcn:",
+"aix64-cc",   "cc:-O -DAIX -DB_ENDIAN -qmaxmem=16384 -q64::(unknown):::SIXTY_FOUR_BIT_LONG RC4_CHAR::::::::::dlfcn::::::-X 64",

 #
 # Cray T90 and similar (SDSC)
@@ -477,7 +480,7 @@ my %table=(
 # SCO cc.
 "sco5-cc",  "cc:-belf::(unknown)::-lsocket -lresolv -lnsl:${x86_gcc_des} ${x86_gcc_opts}::::::::::dlfcn:svr3-shared:-Kpic", # des options?
 "sco5-cc-pentium",  "cc:-Kpentium::(unknown)::-lsocket:${x86_gcc_des} ${x86_gcc_opts}:::", # des options?
-"sco5-gcc",  "gcc:-O3 -fomit-frame-pointer::(unknown)::-lsocket -lresolv -lnsl:BN_LLONG ${x86_gcc_des} ${x86_gcc_opts}:${x86_elf_asm}:dlfcn:svr3-shared:-fPIC", # the SCO assembler doesn't seem to like our assembler files ...
+"sco5-gcc",  "gcc:-O3 -fomit-frame-pointer::(unknown)::-lsocket -lresolv -lnsl:BN_LLONG ${x86_gcc_des} ${x86_gcc_opts}::::::::::dlfcn:svr3-shared:-fPIC",

 # Sinix/ReliantUNIX RM400
 # NOTE: The CDS++ Compiler up to V2.0Bsomething has the IRIX_CC_BUG optimizer problem. Better use -g  */
@@ -497,6 +500,7 @@ my %table=(
 # Windows NT, Microsoft Visual C++ 4.0

 "VC-NT","cl::::WINNT::BN_LLONG RC4_INDEX EXPORT_VAR_AS_FN ${x86_gcc_opts}::::::::::win32",
+"VC-CE","cl::::WINCE::BN_LLONG RC4_INDEX EXPORT_VAR_AS_FN ${x86_gcc_opts}::::::::::win32",
 "VC-WIN32","cl::::WIN32::BN_LLONG RC4_INDEX EXPORT_VAR_AS_FN ${x86_gcc_opts}::::::::::win32",
 "VC-WIN16","cl:::(unknown):WIN16::MD2_CHAR DES_UNROLL DES_PTR RC4_INDEX THIRTY_TWO_BIT:::",
 "VC-W31-16","cl:::(unknown):WIN16::BN_LLONG MD2_CHAR DES_UNROLL DES_PTR RC4_INDEX SIXTEEN_BIT:::",
@@ -517,13 +521,13 @@ my %table=(

 # Cygwin
 "Cygwin-pre1.3", "gcc:-DTERMIOS -DL_ENDIAN -fomit-frame-pointer -O3 -m486 -Wall::(unknown):CYGWIN32::BN_LLONG ${x86_gcc_des} ${x86_gcc_opts}::::::::::win32",
-"Cygwin", "gcc:-DTERMIOS -DL_ENDIAN -fomit-frame-pointer -O3 -m486 -Wall:::CYGWIN32::BN_LLONG ${x86_gcc_des} ${x86_gcc_opts}:${x86_out_asm}:win32:cygwin-shared:::.dll",
+"Cygwin", "gcc:-DTERMIOS -DL_ENDIAN -fomit-frame-pointer -O3 -march=i486 -Wall:::CYGWIN32::BN_LLONG ${x86_gcc_des} ${x86_gcc_opts}:${x86_out_asm}:win32:cygwin-shared:::.dll",

 # DJGPP
-"DJGPP", "gcc:-I/dev/env/DJDIR/watt32/inc -DTERMIOS -DL_ENDIAN -fomit-frame-pointer -O2 -Wall:::MSDOS:-L/dev/env/DJDIR/watt32/lib -lwatt:BN_LLONG ${x86_gcc_des} ${x86_gcc_opts}::::::::::",
+"DJGPP", "gcc:-I/dev/env/WATT_ROOT/inc -DTERMIOS -DL_ENDIAN -fomit-frame-pointer -O2 -Wall:::MSDOS:-L/dev/env/WATT_ROOT/lib -lwatt:BN_LLONG ${x86_gcc_des} ${x86_gcc_opts}::::::::::",

 # Ultrix from Bernhard Simon <simon@zid.tuwien.ac.at>
-"ultrix-cc","cc:-std1 -O -Olimit 1000 -DL_ENDIAN::(unknown):::::::",
+"ultrix-cc","cc:-std1 -O -Olimit 2500 -DL_ENDIAN::(unknown):::::::",
 "ultrix-gcc","gcc:-O3 -DL_ENDIAN::(unknown):::::::",
 # K&R C is no longer supported; you need gcc on old Ultrix installations
 ##"ultrix","cc:-O2 -DNOPROTO -DNOCONST -DL_ENDIAN::(unknown):::::::",
@@ -542,10 +546,13 @@ my %table=(
 "OpenBSD-hppa",		"gcc:-DTERMIOS -O3 -fomit-frame-pointer::(unknown):::BN_LLONG RC2_CHAR RC4_INDEX DES_UNROLL::::::::::dlfcn:bsd-gcc-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",

 ##### MacOS X (a.k.a. Rhapsody or Darwin) setup
-"rhapsody-ppc-cc","cc:-O3 -DB_ENDIAN::(unknown):MACOSX::BN_LLONG RC4_CHAR RC4_CHUNK DES_UNROLL BF_PTR:::",
+"rhapsody-ppc-cc","cc:-O3 -DB_ENDIAN::(unknown):MACOSX_RHAPSODY::BN_LLONG RC4_CHAR RC4_CHUNK DES_UNROLL BF_PTR:::",
 "darwin-ppc-cc","cc:-O3 -fomit-frame-pointer -fno-common -DB_ENDIAN::-D_REENTRANT:MACOSX::BN_LLONG RC4_CHAR RC4_CHUNK DES_UNROLL BF_PTR:::::::::::darwin-shared:-fPIC::.\$(SHLIB_MAJOR).\$(SHLIB_MINOR).dylib",
 "darwin-i386-cc","cc:-O3 -fomit-frame-pointer -fno-common -DB_ENDIAN::-D_REENTRANT:MACOSX::BN_LLONG RC4_CHAR RC4_CHUNK DES_UNROLL BF_PTR:::::::::::darwin-shared:-fPIC::.\$(SHLIB_MAJOR).\$(SHLIB_MINOR).dylib",

+##### A/UX
+"aux3-gcc","gcc:-O2 -DTERMIO::(unknown):AUX:-lbsd:RC4_CHAR RC4_CHUNK DES_UNROLL BF_PTR:::",
+
 ##### Sony NEWS-OS 4.x
 "newsos4-gcc","gcc:-O -DB_ENDIAN::(unknown):NEWS4:-lmld -liberty:BN_LLONG RC4_CHAR RC4_CHUNK DES_PTR DES_RISC1 DES_UNROLL BF_PTR::::",

@@ -557,11 +564,16 @@ my %table=(

 ##### VxWorks for various targets
 "vxworks-ppc405","ccppc:-g -msoft-float -mlongcall -DCPU=PPC405 -I\$(WIND_BASE)/target/h:::VXWORKS:-r:::::",
+"vxworks-ppc750","ccppc:-ansi -nostdinc -DPPC750 -D_REENTRANT -fvolatile -fno-builtin -fno-for-scope -fsigned-char -Wall -msoft-float -mlongcall -DCPU=PPC604 -I\$(WIND_BASE)/target/h \$(DEBUG_FLAG):::VXWORKS:-r:::::",
+"vxworks-ppc750-debug","ccppc:-ansi -nostdinc -DPPC750 -D_REENTRANT -fvolatile -fno-builtin -fno-for-scope -fsigned-char -Wall -msoft-float -mlongcall -DCPU=PPC604 -I\$(WIND_BASE)/target/h -DBN_DEBUG -DREF_CHECK -DCONF_DEBUG -DBN_CTX_DEBUG -DCRYPTO_MDEBUG -DPEDANTIC -DDEBUG_SAFESTACK -DDEBUG -g:::VXWORKS:-r:::::",
+
+##### Compaq Non-Stop Kernel (Tandem)
+"tandem-c89","c89:-Ww -D__TANDEM -D_XOPEN_SOURCE -D_XOPEN_SOURCE_EXTENDED=1 -D_TANDEM_SOURCE -DB_ENDIAN::(unknown):::THIRTY_TWO_BIT:::",

 );

-my @WinTargets=qw(VC-NT VC-WIN32 VC-WIN16 VC-W31-16 VC-W31-32 VC-MSDOS BC-32
-	BC-16 Mingw32 OS2-EMX);
+my @WinTargets=qw(VC-NT VC-CE VC-WIN32 VC-WIN16 VC-W31-16 VC-W31-32 VC-MSDOS
+	BC-32 BC-16 Mingw32 OS2-EMX);

 my $idx = 0;
 my $idx_cc = $idx++;
@@ -586,6 +598,7 @@ my $idx_shared_cflag = $idx++;
 my $idx_shared_ldflag = $idx++;
 my $idx_shared_extension = $idx++;
 my $idx_ranlib = $idx++;
+my $idx_arflags = $idx++;

 my $prefix="";
 my $openssldir="";
@@ -705,7 +718,7 @@ PROCESS_ARGS:
 			{ $threads=1; }
 		elsif (/^no-shared$/)
 			{ $no_shared=1; }
-		elsif (/^shared$/)
+		elsif (/^shared$/ || /^-shared$/ || /^--shared$/)
 			{ $no_shared=0; }
 		elsif (/^no-zlib$/)
 			{ $zlib=0; }
@@ -733,6 +746,7 @@ PROCESS_ARGS:
 			$openssl_algorithm_defines .= "#define OPENSSL_NO_$algo\n";
 			if ($algo eq "RIJNDAEL")
 				{
+				push @skip, "aes";
 				$flags .= "-DOPENSSL_NO_AES ";
 				$depflags .= "-DOPENSSL_NO_AES ";
 				$openssl_algorithm_defines .= "#define OPENSSL_NO_AES\n";
@@ -940,6 +954,7 @@ my $shared_cflag = $fields[$idx_shared_cflag];
 my $shared_ldflag = $fields[$idx_shared_ldflag];
 my $shared_extension = $fields[$idx_shared_extension];
 my $ranlib = $fields[$idx_ranlib];
+my $arflags = $fields[$idx_arflags];

 $cflags="$flags$cflags" if ($flags ne "");

@@ -958,6 +973,17 @@ else
 	my ($lresolv, $lpath, $lext);
 	if ($withargs{"krb5-flavor"} =~ /^[Hh]eimdal$/)
 		{
+		die "Sorry, Heimdal is currently not supported\n";
+		}
+	##### HACK to force use of Heimdal.
+	##### WARNING: Since we don't really have adequate support for Heimdal,
+	#####          using this will break the build.  You'll have to make
+	#####          changes to the source, and if you do, please send
+	#####          patches to openssl-dev@openssl.org
+	if ($withargs{"krb5-flavor"} =~ /^force-[Hh]eimdal$/)
+		{
+		warn "Heimdal isn't really supported.  Your build WILL break\n";
+		warn "If you fix the problems, please send a patch to openssl-dev\@openssl.org\n";
 		$withargs{"krb5-dir"} = "/usr/heimdal"
 			if $withargs{"krb5-dir"} eq "";
 		$withargs{"krb5-lib"} = "-L".$withargs{"krb5-dir"}.
@@ -990,10 +1016,12 @@ else
 			}
 		}
 	$withargs{"krb5-lib"} .= " -lresolv"
-		if ("$lresolv");
+		if ("$lresolv" ne "");
 	$withargs{"krb5-include"} = "-I".$withargs{"krb5-dir"}."/include"
 		if $withargs{"krb5-include"} eq "" &&
 		   $withargs{"krb5-dir"} ne "";
+
+	$libs.=$withargs{"krb5-lib"}." " if $withargs{"krb5-lib"} ne "";
 	}

 # The DSO code currently always implements all functions so that no
@@ -1049,7 +1077,7 @@ else
 #		}
 	}	

-$lflags="$libs$lflags"if ($libs ne "");
+$lflags="$libs$lflags" if ($libs ne "");

 if ($no_asm)
 	{
@@ -1057,6 +1085,11 @@ if ($no_asm)
 	$sha1_obj=$md5_obj=$rmd160_obj="";
 	}

+if (!$no_shared)
+	{
+	$cast_obj="";	# CAST assembler is not PIC
+	}
+
 if ($threads)
 	{
 	$cflags=$thread_cflags;
@@ -1067,25 +1100,21 @@ if ($zlib)
 	{
 	$cflags = "-DZLIB $cflags";
 	$cflags = "-DZLIB_SHARED $cflags" if $zlib == 2;
-	$lflags = "$lflags -lz" if $zlib == 2;
+	$lflags = "$lflags -lz" if $zlib == 1;
 	}

 # You will find shlib_mark1 and shlib_mark2 explained in Makefile.org
 my $shared_mark = "";
-if ($shared_target ne "")
+if ($shared_target eq "")
+	{
+	$no_shared = 1;
+	}
+if (!$no_shared)
 	{
 	if ($shared_cflag ne "")
 		{
 		$cflags = "$shared_cflag $cflags";
 		}
-	if (!$no_shared)
-		{
-		#$shared_mark = "\$(SHARED_LIBS)";
-		}
-	}
-else
-	{
-	$no_shared = 1;
 	}

 if ($sys_id ne "")
@@ -1208,9 +1237,9 @@ while (<IN>)
 	s/^RMD160_ASM_OBJ=.*$/RMD160_ASM_OBJ= $rmd160_obj/;
 	s/^PROCESSOR=.*/PROCESSOR= $processor/;
 	s/^RANLIB=.*/RANLIB= $ranlib/;
+	s/^ARFLAGS=.*/ARFLAGS= $arflags/;
 	s/^PERL=.*/PERL= $perl/;
 	s/^KRB5_INCLUDES=.*/KRB5_INCLUDES=$withargs{"krb5-include"}/;
-	s/^LIBKRB5=.*/LIBKRB5=$withargs{"krb5-lib"}/;
 	s/^SHLIB_TARGET=.*/SHLIB_TARGET=$shared_target/;
 	s/^SHLIB_MARK=.*/SHLIB_MARK=$shared_mark/;
 	s/^SHARED_LIBS=.*/SHARED_LIBS=\$(SHARED_CRYPTO) \$(SHARED_SSL)/ if (!$no_shared);
@@ -1254,11 +1283,10 @@ print "SHA1_OBJ_ASM  =$sha1_obj\n";
 print "RMD160_OBJ_ASM=$rmd160_obj\n";
 print "PROCESSOR     =$processor\n";
 print "RANLIB        =$ranlib\n";
+print "ARFLAGS       =$arflags\n";
 print "PERL          =$perl\n";
 print "KRB5_INCLUDES =",$withargs{"krb5-include"},"\n"
 	if $withargs{"krb5-include"} ne "";
-print "LIBKRB5       =",$withargs{"krb5-lib"},"\n"
-	if $withargs{"krb5-lib"} ne "";

 my $des_ptr=0;
 my $des_risc1=0;
@@ -1561,7 +1589,7 @@ sub print_table_entry
 	my $bn_ops,my $bn_obj,my $des_obj,my $bf_obj,
 	my $md5_obj,my $sha1_obj,my $cast_obj,my $rc4_obj,my $rmd160_obj,
 	my $rc5_obj,my $dso_scheme,my $shared_target,my $shared_cflag,
-	my $shared_ldflag,my $shared_extension,my $ranlib)=
+	my $shared_ldflag,my $shared_extension,my $ranlib,my $arflags)=
 	split(/\s*:\s*/,$table{$target} . ":" x 30 , -1);
 			
 	print <<EOF
@@ -1589,6 +1617,7 @@ sub print_table_entry
 \$shared_ldflag = $shared_ldflag
 \$shared_extension = $shared_extension
 \$ranlib       = $ranlib
+\$arflags      = $arflags
 EOF
 	}

--- a/60
+++ b/60
@@ -9,6 +9,7 @@ OpenSSL  -  Frequently Asked Questions
 * Where can I get a compiled version of OpenSSL?
 * Why aren't tools like 'autoconf' and 'libtool' used?
 * What is an 'engine' version?
+* How do I check the authenticity of the OpenSSL distribution?

 [LEGAL] Legal questions

@@ -36,12 +37,15 @@ OpenSSL  -  Frequently Asked Questions
 * Why does the linker complain about undefined symbols?
 * Why does the OpenSSL test fail with "bc: command not found"?
 * Why does the OpenSSL test fail with "bc: 1 no implemented"?
+* Why does the OpenSSL test fail with "bc: stack empty"?
 * Why does the OpenSSL compilation fail on Alpha Tru64 Unix?
 * Why does the OpenSSL compilation fail with "ar: command not found"?
 * Why does the OpenSSL compilation fail on Win32 with VC++?
 * What is special about OpenSSL on Redhat?
 * Why does the OpenSSL compilation fail on MacOS X?
 * Why does the OpenSSL test suite fail on MacOS X?
+* Why does the OpenSSL test suite fail in BN_sqr test [on a 64-bit platform]?
+* Why does OpenBSD-i386 build fail on des-586.s with "Unimplemented segment type"?

 [PROG] Questions about programming with OpenSSL

@@ -64,7 +68,7 @@ OpenSSL  -  Frequently Asked Questions
 * Which is the current version of OpenSSL?

 The current version is available from <URL: http://www.openssl.org>.
-OpenSSL 0.9.6e was released on July 30, 2002.
+OpenSSL 0.9.7 was released on December 31, 2002.

 In addition to the current stable release, you can also access daily
 snapshots of the OpenSSL development version at <URL:
@@ -135,6 +139,19 @@ hardware. This was realized in a special release '0.9.6-engine'. With
 version 0.9.7 (not yet released) the changes were merged into the main
 development line, so that the special release is no longer necessary.

+* How do I check the authenticity of the OpenSSL distribution?
+
+We provide MD5 digests and ASC signatures of each tarball.
+Use MD5 to check that a tarball from a mirror site is identical:
+
+   md5sum TARBALL | awk '{print $1;}' | cmp - TARBALL.md5
+
+You can check authenticity using pgp or gpg. You need the OpenSSL team
+member public key used to sign it (download it from a key server). Then
+just do:
+
+   pgp TARBALL.asc
+
 [LEGAL] =======================================================================

 * Do I need patent licenses to use OpenSSL?
@@ -225,6 +242,8 @@ support can be found at
  http://sunsolve.sun.com/pub-cgi/retrieve.pl?doc=fsrdb/27606&zone_32=SUNWski
 However, be warned that /dev/random is usually a blocking device, which
 may have some effects on OpenSSL.
+A third party /dev/random solution for Solaris is available at
+  http://www.cosy.sbg.ac.at/~andi/


 * Why do I get an "unable to write 'random state'" error message?
@@ -402,6 +421,17 @@ and compile/install it.  GNU bc (see http://www.gnu.org/software/software.html
 for download instructions) can be safely used, for example.


+* Why does the OpenSSL test fail with "bc: stack empty"?
+
+On some DG/ux versions, bc seems to have a too small stack for calculations
+that the OpenSSL bntest throws at it.  This gets triggered when you run the
+test suite (using "make test").  The message returned is "bc: stack empty".
+
+The best way to deal with this is to find another implementation of bc
+and compile/install it.  GNU bc (see http://www.gnu.org/software/software.html
+for download instructions) can be safely used, for example.
+
+
 * Why does the OpenSSL compilation fail on Alpha Tru64 Unix?

 On some Alpha installations running Tru64 Unix and Compaq C, the compilation
@@ -524,6 +554,34 @@ libraries you just built.
 Look in the file PROBLEMS for a more detailed explanation and for possible
 solutions.

+* Why does the OpenSSL test suite fail in BN_sqr test [on a 64-bit platform]?
+
+Failure in BN_sqr test is most likely caused by a failure to configure the
+toolkit for current platform or lack of support for the platform in question.
+Run './config -t' and './apps/openssl version -p'. Do these platform
+identifiers match? If they don't, then you most likely failed to run
+./config and you're hereby advised to do so before filing a bug report.
+If ./config itself fails to run, then it's most likely problem with your
+local environment and you should turn to your system administrator (or
+similar). If identifiers match (and/or no alternative identifier is
+suggested by ./config script), then the platform is unsupported. There might
+or might not be a workaround. Most notably on SPARC64 platforms with GNU
+C compiler you should be able to produce a working build by running
+'./config -m32'. I understand that -m32 might not be what you want/need,
+but the build should be operational. For further details turn to
+<openssl-dev@openssl.org>.
+
+* Why does OpenBSD-i386 build fail on des-586.s with "Unimplemented segment type"?
+
+As of 0.9.7 assembler routines were overhauled for position independence
+of the machine code, which is essential for shared library support. For
+some reason OpenBSD is equipped with an out-of-date GNU assembler which
+finds the new code offensive. To work around the problem, configure with
+no-asm (and sacrifice a great deal of performance) or upgrade /usr/bin/as.
+For your convenience a pre-compiled replacement binary is provided at
+http://www.openssl.org/~appro/i386-openbsd3-as, which is compiled from
+binutils-2.8 released in 1997.
+
 [PROG] ========================================================================

 * Is OpenSSL thread-safe?
--- a/18
+++ b/18
@@ -140,8 +140,8 @@
     standard headers).  If it is a problem with OpenSSL itself, please
     report the problem to <openssl-bugs@openssl.org> (note that your
     message will be recorded in the request tracker publicly readable
-     via http://www.openssl.org/rt2.html and will be forwarded to a public
-     mailing list). Include the output of "make report" in your message.
+     via http://www.openssl.org/support/rt2.html and will be forwarded to a
+     public mailing list). Include the output of "make report" in your message.
     Please check out the request tracker. Maybe the bug was already
     reported or has already been fixed.

@@ -162,7 +162,7 @@
     in Makefile.ssl and run "make clean; make". Please send a bug
     report to <openssl-bugs@openssl.org>, including the output of
     "make report" in order to be added to the request tracker at
-     http://www.openssl.org/rt2.html.
+     http://www.openssl.org/support/rt2.html.

  4. If everything tests ok, install OpenSSL with

@@ -296,3 +296,15 @@
 targets for shared library creation, like linux-shared.  Those targets
 can currently be used on their own just as well, but this is expected
 to change in future versions of OpenSSL.
+
+ Note on random number generation
+ --------------------------------
+
+ Availability of cryptographically secure random numbers is required for
+ secret key generation. OpenSSL provides several options to seed the
+ internal PRNG. If not properly seeded, the internal PRNG will refuse
+ to deliver random bytes and a "PRNG not seeded error" will occur.
+ On systems without /dev/urandom (or similar) device, it may be necessary
+ to install additional support software to obtain random seed.
+ Please check out the manual pages for RAND_add(), RAND_bytes(), RAND_egd(),
+ and the FAQ for more information.
--- a/INSTALL.DJGPP
+++ b/INSTALL.DJGPP
@@ -12,12 +12,14 @@
 latest versions of DJGPP, GCC, BINUTILS, BASH, etc. This package
 requires that PERL and BC also be installed.

- All of these can be obtained from the usual DJGPP mirror sites, such as
- "ftp://ftp.simtel.net/pub/simtelnet/gnu/djgpp". You also need to have
- the WATT-32 networking package installed before you try to compile
- openssl. This can be obtained from "http://www.bgnett.no/~giva/". The
- Makefile assumes that the WATT-32 code is in directory "watt32" under
- /dev/env/DJDIR.
+ All of these can be obtained from the usual DJGPP mirror sites, such
+ as "ftp://ftp.simtel.net/pub/simtelnet/gnu/djgpp". You also need to
+ have the WATT-32 networking package installed before you try to compile
+ openssl. This can be obtained from "http://www.bgnett.no/~giva/".
+ The Makefile assumes that the WATT-32 code is in the directory
+ specified by the environment variable WATT_ROOT. If you have watt-32
+ in directory "watt32" under your main DJGPP directory, specify
+ WATT_ROOT="/dev/env/DJDIR/watt32".

 To compile openssl, start your BASH shell. Then configure for DOS by
 running "./Configure" with appropriate arguments. The basic syntax for
--- a/INSTALL.W32
+++ b/INSTALL.W32
@@ -2,6 +2,8 @@
 INSTALLATION ON THE WIN32 PLATFORM
 ----------------------------------

+ [Instructions for building for Windows CE can be found in INSTALL.WCE]
+
 Heres a few comments about building OpenSSL in Windows environments.  Most
 of this is tested on Win32 but it may also work in Win 3.1 with some
 modification.
@@ -82,7 +84,8 @@
 There are various changes you can make to the Win32 compile environment. By
 default the library is not compiled with debugging symbols. If you add 'debug'
 to the mk1mf.pl lines in the do_* batch file then debugging symbols will be
- compiled in.
+ compiled in. Note that mk1mf.pl expects the platform to be the last argument
+ on the command line, so 'debug' must appear before that, as all other options.

 The default Win32 environment is to leave out any Windows NT specific
 features.
--- a/INSTALL.WCE
+++ b/INSTALL.WCE
@@ -0,0 +1,71 @@
+ 
+ INSTALLATION FOR THE WINDOWS CE PLATFORM
+ ----------------------------------------
+
+ Building OpenSSL for Windows CE requires the following external tools:
+
+  * Microsoft eMbedded Visual C++ 3.0
+  * wcecompat compatibility library (www.essemer.com.au)
+  * Optionally ceutils for running automated tests (www.essemer.com.au)
+
+ You also need Perl for Win32.  You will need ActiveState Perl, available
+ from http://www.activestate.com/ActivePerl.
+
+ Windows CE support in OpenSSL relies on wcecompat.  All Windows CE specific
+ issues should be directed to www.essemer.com.au.
+
+ The C Runtime Library implementation for Windows CE that is included with
+ Microsoft eMbedded Visual C++ 3.0 is incomplete and in some places
+ incorrect.  wcecompat plugs the holes and tries to bring the Windows CE
+ CRT to a level that is more compatible with ANSI C.  wcecompat goes further
+ and provides low-level IO and stream IO support for stdin/stdout/stderr
+ (which Windows CE does not provide).  This IO functionality is not needed
+ by the OpenSSL library itself but is used for the tests and openssl.exe.
+ More information is available at www.essemer.com.au.
+
+ Building
+ --------
+
+ Setup the eMbedded Visual C++ environment.  There are batch files for doing
+ this installed with eVC++.  For an ARM processor, for example, execute:
+
+ > "C:\Program Files\Microsoft eMbedded Tools\EVC\WCE300\BIN\WCEARM.BAT"
+
+ Next indicate where wcecompat is located:
+
+ > set WCECOMPAT=C:\wcecompat
+
+ Next you should run Configure:
+
+ > perl Configure VC-CE
+
+ Next you need to build the Makefiles:
+
+ > ms\do_ms
+
+ If you get errors about things not having numbers assigned then check the
+ troubleshooting section in INSTALL.W32: you probably won't be able to compile
+ it as it stands.
+
+ Then from the VC++ environment at a prompt do:
+
+ - to build static libraries:
+
+   > nmake -f ms\ce.mak
+
+ - or to build DLLs:
+
+   > nmake -f ms\cedll.mak
+
+ If all is well it should compile and you will have some static libraries and
+ executables in out32, or some DLLs and executables in out32dll.  If you want
+ to try the tests then make sure the ceutils are in the path and do:
+ 
+ > cd out32
+ > ..\ms\testce
+
+ This will copy each of the test programs to the Windows CE device and execute
+ them, displaying the output of the tests on this computer.  The output should
+ look similar to the output produced by running the tests for a regular Windows
+ build.
+
--- a/MacOS/GetHTTPS.src/MacSocket.cpp
+++ b/MacOS/GetHTTPS.src/MacSocket.cpp
@@ -1287,7 +1287,7 @@ EXITPOINT:

 //	Send some bytes

-int MacSocket_send(const int inSocketNum,void *inBuff,int inBuffLength)
+int MacSocket_send(const int inSocketNum,const void *inBuff,int inBuffLength)
 {
 OSErr			errCode = noErr;
 int				bytesSent = 0;
@@ -1604,4 +1604,4 @@ EPInfo* epi = (EPInfo*) context;
 		}
 	}
 }
-*/
+*/
--- a/MacOS/GetHTTPS.src/MacSocket.h
+++ b/MacOS/GetHTTPS.src/MacSocket.h
@@ -62,7 +62,7 @@ int MacSocket_recv(const int inSocketNum,void *outBuff,int outBuffLength,const B

 //	Call this to send data on a socket

-int MacSocket_send(const int inSocketNum,void *inBuff,int inBuffLength);
+int MacSocket_send(const int inSocketNum,const void *inBuff,int inBuffLength);


 //	If zero bytes were read in a call to MacSocket_recv(), it may be that the remote end has done a half-close
--- a/Makefile.org
+++ b/Makefile.org
@@ -15,6 +15,11 @@ OPTIONS=
 CONFIGURE_ARGS=
 SHLIB_TARGET=

+# HERE indicates where this Makefile lives.  This can be used to indicate
+# where sub-Makefiles are expected to be.  Currently has very limited usage,
+# and should probably not be bothered with at all.
+HERE=.
+
 # INSTALL_PREFIX is for package builders so that they can configure
 # for, say, /usr/ and yet have everything installed to /tmp/somedir/usr/.
 # Normally it is left empty.
@@ -59,7 +64,8 @@ DEPFLAG=
 PEX_LIBS= 
 EX_LIBS= 
 EXE_EXT= 
-AR=ar r
+ARFLAGS=
+AR=ar $(ARFLAGS) r
 RANLIB= ranlib
 PERL= perl
 TAR= tar
@@ -153,7 +159,6 @@ RMD160_ASM_OBJ= asm/rm86-out.o

 # KRB5 stuff
 KRB5_INCLUDES=
-LIBKRB5=

 # When we're prepared to use shared libraries in the programs we link here
 # we might set SHLIB_MARK to '$(SHARED_LIBS)'.
@@ -204,7 +209,7 @@ HEADER=         e_os.h
 # When we're prepared to use shared libraries in the programs we link here
 # we might remove 'clean-shared' from the targets to perform at this stage

-all: Makefile.ssl sub_all
+all: Makefile.ssl sub_all openssl.pc

 sub_all:
 	@for i in $(DIRS); \
@@ -241,7 +246,7 @@ clean-shared:
 		fi; \
 		( set -x; rm -f lib$$i$(SHLIB_EXT) ); \
 		if [ "$(PLATFORM)" = "Cygwin" ]; then \
-			( set -x; rm -f cyg$$i$(SHLIB_EXT) lib$$i$(SHLIB_EXT).a ); \
+			( set -x; rm -f cyg$$i-$(SHLIB_VERSION_NUMBER)$(SHLIB_EXT) lib$$i$(SHLIB_EXT).a ); \
 		fi; \
 	done

@@ -251,7 +256,8 @@ link-shared:
 		for i in $(SHLIBDIRS); do \
 			prev=lib$$i$(SHLIB_EXT); \
 			for j in $${tmp:-x}; do \
-				( set -x; ln -f -s $$prev lib$$i$$j ); \
+				( set -x; \
+				rm -f lib$$i$$j; ln -s $$prev lib$$i$$j ); \
 				prev=lib$$i$$j; \
 			done; \
 		done; \
@@ -272,12 +278,7 @@ do_gnu-shared:
 	libs="$$libs -l$$i"; \
 	done

-DETECT_GNU_LD=${CC} -v 2>&1 | grep '^gcc' >/dev/null 2>&1 && \
-	collect2=`gcc -print-prog-name=collect2 2>&1` && \
-	[ -n "$$collect2" ] && \
-	my_ld=`$$collect2 --help 2>&1 | grep Usage: | sed 's/^Usage: *\([^ ][^ ]*\).*/\1/'` && \
-	[ -n "$$my_ld" ] && \
-	$$my_ld -v 2>&1 | grep 'GNU ld' >/dev/null 2>&1
+DETECT_GNU_LD=(${CC} -Wl,-V /dev/null 2>&1 | grep '^GNU ld' )>/dev/null

 # For Darwin AKA Mac OS/X (dyld)
 do_darwin-shared: 
@@ -292,7 +293,7 @@ do_darwin-shared:

 do_cygwin-shared:
 	libs='-L. ${SHLIBDEPS}'; for i in ${SHLIBDIRS}; do \
-	( set -x; ${CC}  -shared -o cyg$$i.dll \
+	( set -x; ${CC}  -shared -o cyg$$i-$(SHLIB_VERSION_NUMBER).dll \
 		-Wl,-Bsymbolic \
 		-Wl,--whole-archive lib$$i.a \
 		-Wl,--out-implib,lib$$i.dll.a \
@@ -355,10 +356,13 @@ do_solaris-shared:
 	else \
 		libs='-L. ${SHLIBDEPS}'; for i in ${SHLIBDIRS}; do \
 		( PATH=/usr/ccs/bin:$$PATH ; export PATH; \
-		  set -x; ${CC} ${SHARED_LDFLAGS} \
-			-G -o lib$$i.so.${SHLIB_MAJOR}.${SHLIB_MINOR} \
+		  MINUSZ='-z '; \
+		  (${CC} -v 2>&1 | grep gcc) > /dev/null && MINUSZ='-Wl,-z,'; \
+		  set -x; ${CC} ${SHARED_LDFLAGS} -G -dy -z text \
+			-o lib$$i.so.${SHLIB_MAJOR}.${SHLIB_MINOR} \
 			-h lib$$i.so.${SHLIB_MAJOR}.${SHLIB_MINOR} \
-			-z allextract lib$$i.a $$libs ${EX_LIBS} -lc ) || exit 1; \
+			$${MINUSZ}allextract lib$$i.a $${MINUSZ}defaultextract \
+			$$libs ${EX_LIBS} -lc ) || exit 1; \
 		libs="$$libs -l$$i"; \
 		done; \
 	fi
@@ -514,6 +518,19 @@ do_reliantunix-shared:
 	libs="$$libs -l$$i"; \
 	done

+openssl.pc: Makefile.ssl
+	@ ( echo 'prefix=$(INSTALLTOP)'; \
+	    echo 'exec_prefix=$${prefix}'; \
+	    echo 'libdir=$${exec_prefix}/lib'; \
+	    echo 'includedir=$${prefix}/include'; \
+	    echo ''; \
+	    echo 'Name: OpenSSL'; \
+	    echo 'Description: Secure Sockets Layer and cryptography libraries and tools'; \
+	    echo 'Version: '$(VERSION); \
+	    echo 'Requires: '; \
+	    echo 'Libs: -L$${libdir} -lssl -lcrypto $(EX_LIBS)'; \
+	    echo 'Cflags: -I$${includedir} $(KRB5_INCLUDES)' ) > openssl.pc
+
 Makefile.ssl: Makefile.org
 	@echo "Makefile.ssl is older than Makefile.org."
 	@echo "Reconfigure the source tree (via './config' or 'perl Configure'), please."
@@ -532,6 +549,7 @@ clean:
 		rm -f $(LIBS); \
 	fi; \
 	done;
+	rm -f openssl.pc
 	rm -f *.a *.o speed.* *.map *.so .pure core
 	rm -f $(TARFILE)
 	@for i in $(ONEDIRS) ;\
@@ -583,7 +601,9 @@ rehash.time: certs
 	@(OPENSSL="`pwd`/apps/openssl"; OPENSSL_DEBUG_MEMORY=on; \
 		export OPENSSL OPENSSL_DEBUG_MEMORY; \
 		LD_LIBRARY_PATH="`pwd`"; DYLD_LIBRARY_PATH="`pwd`"; SHLIB_PATH="`pwd`"; LIBPATH="`pwd`"; \
-		export LD_LIBRARY_PATH DYLD_LIBRARY_PATH SHLIB_PATH LIBPATH; \
+		if [ "$(PLATFORM)" = "DJGPP" ]; then PATH="`pwd`\;$$PATH";  \
+		elif [ "$(PLATFORM)" = "Cygwin" ]; then PATH="`pwd`:$$PATH"; fi; \
+		export LD_LIBRARY_PATH DYLD_LIBRARY_PATH SHLIB_PATH LIBPATH PATH; \
 		$(PERL) tools/c_rehash certs)
 	touch rehash.time

@@ -593,7 +613,9 @@ tests: rehash
 	@(cd test && echo "testing..." && \
 	$(MAKE) CC='${CC}' PLATFORM='${PLATFORM}' CFLAG='${CFLAG}' SDIRS='$(SDIRS)' INSTALLTOP='${INSTALLTOP}' PEX_LIBS='${PEX_LIBS}' EX_LIBS='${EX_LIBS}' BN_ASM='${BN_ASM}' DES_ENC='${DES_ENC}' BF_ENC='${BF_ENC}' CAST_ENC='${CAST_ENC}' RC4_ENC='${RC4_ENC}' RC5_ENC='${RC5_ENC}' SHA1_ASM_OBJ='${SHA1_ASM_OBJ}' MD5_ASM_OBJ='${MD5_ASM_OBJ}' RMD160_ASM_OBJ='${RMD160_ASM_OBJ}' AR='${AR}' PROCESSOR='${PROCESSOR}' PERL='${PERL}' RANLIB='${RANLIB}' TESTS='${TESTS}' KRB5_INCLUDES='${KRB5_INCLUDES}' LIBKRB5='${LIBKRB5}' EXE_EXT='${EXE_EXT}' SHARED_LIBS='${SHARED_LIBS}' SHLIB_EXT='${SHLIB_EXT}' SHLIB_TARGET='${SHLIB_TARGET}' TESTS='${TESTS}' OPENSSL_DEBUG_MEMORY=on tests );
 	@LD_LIBRARY_PATH="`pwd`"; DYLD_LIBRARY_PATH="`pwd`"; SHLIB_PATH="`pwd`"; LIBPATH="`pwd`"; \
-		export LD_LIBRARY_PATH DYLD_LIBRARY_PATH SHLIB_PATH LIBPATH; \
+		if [ "$(PLATFORM)" = "DJGPP" ]; then PATH="`pwd`\;$$PATH";  \
+		elif [ "$(PLATFORM)" = "Cygwin" ]; then PATH="`pwd`:$$PATH"; fi; \
+		export LD_LIBRARY_PATH DYLD_LIBRARY_PATH SHLIB_PATH LIBPATH PATH; \
 		apps/openssl version -a

 report:
@@ -656,6 +678,9 @@ update: depend errors stacks util/libeay.num util/ssleay.num crypto/objects/obj_
 # and read directly, requiring GNU-Tar. Call "make TAR=gtar dist" if the normal
 # tar does not support the --files-from option.
 tar:
+	find . -type d -print | xargs chmod 755
+	find . -type f -print | xargs chmod a+r
+	find . -type f -perm -0100 -print | xargs chmod a+x
 	find * \! -path CVS/\* \! -path \*/CVS/\* \! -name CVS \! -name .cvsignore \! -name STATUS \! -name TABLE | sort > ../$(TARFILE).list; \
 	$(TAR) $(TARFLAGS) --files-from ../$(TARFILE).list -cvf - | \
 	tardy --user_number=0  --user_name=openssl \
@@ -685,6 +710,7 @@ dist_pem_h:
 install: all install_docs
 	@$(PERL) $(TOP)/util/mkdir-p.pl $(INSTALL_PREFIX)$(INSTALLTOP)/bin \
 		$(INSTALL_PREFIX)$(INSTALLTOP)/lib \
+		$(INSTALL_PREFIX)$(INSTALLTOP)/lib/pkgconfig \
 		$(INSTALL_PREFIX)$(INSTALLTOP)/include/openssl \
 		$(INSTALL_PREFIX)$(OPENSSLDIR)/misc \
 		$(INSTALL_PREFIX)$(OPENSSLDIR)/certs \
@@ -706,9 +732,10 @@ install: all install_docs
 	do \
 		if [ -f "$$i" ]; then \
 		(       echo installing $$i; \
-			cp $$i $(INSTALL_PREFIX)$(INSTALLTOP)/lib; \
-			$(RANLIB) $(INSTALL_PREFIX)$(INSTALLTOP)/lib/$$i; \
-			chmod 644 $(INSTALL_PREFIX)$(INSTALLTOP)/lib/$$i ); \
+			cp $$i $(INSTALL_PREFIX)$(INSTALLTOP)/lib/$$i.new; \
+			$(RANLIB) $(INSTALL_PREFIX)$(INSTALLTOP)/lib/$$i.new; \
+			chmod 644 $(INSTALL_PREFIX)$(INSTALLTOP)/lib/$$i.new; \
+			mv -f $(INSTALL_PREFIX)$(INSTALLTOP)/lib/$$i.new $(INSTALL_PREFIX)$(INSTALLTOP)/lib/$$i ); \
 		fi; \
 	done;
 	@if [ -n "$(SHARED_LIBS)" ]; then \
@@ -718,21 +745,26 @@ install: all install_docs
 			if [ -f "$$i" -o -f "$$i.a" ]; then \
 			(       echo installing $$i; \
 				if [ "$(PLATFORM)" != "Cygwin" ]; then \
-					cp $$i $(INSTALL_PREFIX)$(INSTALLTOP)/lib; \
-					chmod 555 $(INSTALL_PREFIX)$(INSTALLTOP)/lib/$$i; \
+					cp $$i $(INSTALL_PREFIX)$(INSTALLTOP)/lib/$$i.new; \
+					chmod 555 $(INSTALL_PREFIX)$(INSTALLTOP)/lib/$$i.new; \
+					mv -f $(INSTALL_PREFIX)$(INSTALLTOP)/lib/$$i.new $(INSTALL_PREFIX)$(INSTALLTOP)/lib/$$i; \
 				else \
-					c=`echo $$i | sed 's/^lib/cyg/'`; \
-					cp $$c $(INSTALL_PREFIX)$(INSTALLTOP)/bin/$$c; \
-					chmod 755 $(INSTALL_PREFIX)$(INSTALLTOP)/bin/$$c; \
-					cp $$i.a $(INSTALL_PREFIX)$(INSTALLTOP)/lib/$$i.a; \
-					chmod 644 $(INSTALL_PREFIX)$(INSTALLTOP)/lib/$$i.a; \
+					c=`echo $$i | sed 's/^lib\(.*\)/cyg\1-$(SHLIB_VERSION_NUMBER)/'`; \
+					cp $$c $(INSTALL_PREFIX)$(INSTALLTOP)/bin/$$c.new; \
+					chmod 755 $(INSTALL_PREFIX)$(INSTALLTOP)/bin/$$c.new; \
+					mv -f $(INSTALL_PREFIX)$(INSTALLTOP)/bin/$$c.new $(INSTALL_PREFIX)$(INSTALLTOP)/bin/$$c; \
+					cp $$i.a $(INSTALL_PREFIX)$(INSTALLTOP)/lib/$$i.a.new; \
+					chmod 644 $(INSTALL_PREFIX)$(INSTALLTOP)/lib/$$i.a.new; \
+					mv -f $(INSTALL_PREFIX)$(INSTALLTOP)/lib/$$i.a.new $(INSTALL_PREFIX)$(INSTALLTOP)/lib/$$i.a; \
 				fi ); \
 			fi; \
 		done; \
 		(	here="`pwd`"; \
 			cd $(INSTALL_PREFIX)$(INSTALLTOP)/lib; \
-			make -f $$here/Makefile link-shared ); \
+			set $(MAKE); \
+			$$1 -f $$here/Makefile link-shared ); \
 	fi
+	cp openssl.pc $(INSTALL_PREFIX)$(INSTALLTOP)/lib/pkgconfig

 install_docs:
 	@$(PERL) $(TOP)/util/mkdir-p.pl \
@@ -740,25 +772,43 @@ install_docs:
 		$(INSTALL_PREFIX)$(MANDIR)/man3 \
 		$(INSTALL_PREFIX)$(MANDIR)/man5 \
 		$(INSTALL_PREFIX)$(MANDIR)/man7
-	@for i in doc/apps/*.pod; do \
+	@pod2man="`cd util; ./pod2mantest $(PERL)`"; \
+	here="`pwd`"; \
+	filecase=; \
+	if [ "$(PLATFORM)" = "DJGPP" -o "$(PLATFORM)" = "Cygwin" ]; then \
+		filecase=-i; \
+	fi; \
+	for i in doc/apps/*.pod; do \
 		fn=`basename $$i .pod`; \
 		if [ "$$fn" = "config" ]; then sec=5; else sec=1; fi; \
-		echo "installing man$$sec/`basename $$i .pod`.$$sec"; \
+		echo "installing man$$sec/$$fn.$$sec"; \
 		(cd `$(PERL) util/dirname.pl $$i`; \
-		sh -c "$(PERL) `cd ../../util; ./pod2mantest ignore` \
+		sh -c "$$pod2man \
 			--section=$$sec --center=OpenSSL \
 			--release=$(VERSION) `basename $$i`") \
-			>  $(INSTALL_PREFIX)$(MANDIR)/man$$sec/`basename $$i .pod`.$$sec; \
-	done
-	@for i in doc/crypto/*.pod doc/ssl/*.pod; do \
+			>  $(INSTALL_PREFIX)$(MANDIR)/man$$sec/$$fn.$$sec; \
+		$(PERL) util/extract-names.pl < $$i | \
+			grep -v $$filecase "^$$fn\$$" | \
+			(cd $(INSTALL_PREFIX)$(MANDIR)/man$$sec/; \
+			 while read n; do \
+				$$here/util/point.sh $$fn.$$sec $$n.$$sec; \
+			 done); \
+	done; \
+	for i in doc/crypto/*.pod doc/ssl/*.pod; do \
 		fn=`basename $$i .pod`; \
 		if [ "$$fn" = "des_modes" ]; then sec=7; else sec=3; fi; \
-		echo "installing man$$sec/`basename $$i .pod`.$$sec"; \
+		echo "installing man$$sec/$$fn.$$sec"; \
 		(cd `$(PERL) util/dirname.pl $$i`; \
-		sh -c "$(PERL) `cd ../../util; ./pod2mantest ignore` \
+		sh -c "$$pod2man \
 			--section=$$sec --center=OpenSSL \
 			--release=$(VERSION) `basename $$i`") \
-			>  $(INSTALL_PREFIX)$(MANDIR)/man$$sec/`basename $$i .pod`.$$sec; \
+			>  $(INSTALL_PREFIX)$(MANDIR)/man$$sec/$$fn.$$sec; \
+		$(PERL) util/extract-names.pl < $$i | \
+			grep -v $$filecase "^$$fn\$$" | \
+			(cd $(INSTALL_PREFIX)$(MANDIR)/man$$sec/; \
+			 while read n; do \
+				$$here/util/point.sh $$fn.$$sec $$n.$$sec; \
+			 done); \
 	done

 # DO NOT DELETE THIS LINE -- make depend depends on it.
--- a/33
+++ b/33
@@ -17,6 +17,15 @@
        a separate distribution.
      o New elliptic curve library section.
      o New AES (Rijndael) library section.
+      o Support for new platforms: Windows CE, Tandem OSS, A/UX, AIX 64-bit,
+        Linux x86_64, Linux 64-bit on Sparc v9
+      o Extended support for some platforms: VxWorks
+      o Enhanced support for shared libraries.
+      o Now only builds PIC code when shared library support is requested.
+      o Support for pkg-config.
+      o Lots of new manuals.
+      o Makes symbolic links to or copies of manuals to cover all described
+        functions.
      o Change DES API to clean up the namespace (some applications link also
        against libdes providing similar functions having the same name).
        Provide macros for backward compatibility (will be removed in the
@@ -30,16 +39,40 @@
      o Reworked parts of the BIGNUM code.
      o Support for new engines: Broadcom ubsec, Accelerated Encryption
        Processing, IBM 4758.
+      o A few new engines added in the demos area.
      o Extended and corrected OID (object identifier) table.
      o PRNG: query at more locations for a random device, automatic query for
        EGD style random sources at several locations.
      o SSL/TLS: allow optional cipher choice according to server's preference.
      o SSL/TLS: allow server to explicitly set new session ids.
      o SSL/TLS: support Kerberos cipher suites (RFC2712).
+	Only supports MIT Kerberos for now.
      o SSL/TLS: allow more precise control of renegotiations and sessions.
      o SSL/TLS: add callback to retrieve SSL/TLS messages.
      o SSL/TLS: support AES cipher suites (RFC3268).

+  Major changes between OpenSSL 0.9.6g and OpenSSL 0.9.6h:
+
+      o New configuration targets for Tandem OSS and A/UX.
+      o New OIDs for Microsoft attributes.
+      o Better handling of SSL session caching.
+      o Better comparison of distinguished names.
+      o Better handling of shared libraries in a mixed GNU/non-GNU environment.
+      o Support assembler code with Borland C.
+      o Fixes for length problems.
+      o Fixes for uninitialised variables.
+      o Fixes for memory leaks, some unusual crashes and some race conditions.
+      o Fixes for smaller building problems.
+      o Updates of manuals, FAQ and other instructive documents.
+
+  Major changes between OpenSSL 0.9.6f and OpenSSL 0.9.6g:
+
+      o Important building fixes on Unix.
+
+  Major changes between OpenSSL 0.9.6e and OpenSSL 0.9.6f:
+
+      o Various important bugfixes.
+
  Major changes between OpenSSL 0.9.6d and OpenSSL 0.9.6e:

      o Important security related bugfixes.
--- a/32
+++ b/32
@@ -38,3 +38,35 @@ may differ on your machine.
 As long as Apple doesn't fix the problem with ld, this problem building
 OpenSSL will remain as is.

+
+* Parallell make leads to errors
+
+While running tests, running a parallell make is a bad idea.  Many test
+scripts use the same name for output and input files, which means different
+will interfere with each other and lead to test failure.
+
+The solution is simple for now: don't run parallell make when testing.
+
+
+* Bugs in gcc 3.0 triggered
+
+According to a problem report, there are bugs in gcc 3.0 that are
+triggered by some of the code in OpenSSL, more specifically in
+PEM_get_EVP_CIPHER_INFO().  The triggering code is the following:
+
+	header+=11;
+	if (*header != '4') return(0); header++;
+	if (*header != ',') return(0); header++;
+
+What happens is that gcc might optimize a little too agressively, and
+you end up with an extra incrementation when *header != '4'.
+
+We recommend that you upgrade gcc to as high a 3.x version as you can.
+
+* solaris64-sparcv9-cc SHA-1 performance with WorkShop 6 compiler.
+
+As subject suggests SHA-1 might perform poorly (4 times slower)
+if compiled with WorkShop 6 compiler and -xarch=v9. The cause for
+this seems to be the fact that compiler emits multiplication to
+perform shift operations:-( To work the problem around configure
+with './Configure solaris64-sparcv9-cc -DMD32_REG_T=int'.
--- a/4
+++ b/4
@@ -1,5 +1,5 @@

- OpenSSL 0.9.7-beta3 30 Jul 2002
+ OpenSSL 0.9.7 31 Dec 2002

 Copyright (c) 1998-2002 The OpenSSL Project
 Copyright (c) 1995-1998 Eric A. Young, Tim J. Hudson
@@ -154,7 +154,7 @@
    - Stack Traceback (if the application dumps core)

 Report the bug to the OpenSSL project via the Request Tracker
- (http://www.openssl.org/rt2.html) by mail to:
+ (http://www.openssl.org/support/rt2.html) by mail to:

    openssl-bugs@openssl.org

--- a/25
+++ b/25
@@ -1,13 +1,14 @@

  OpenSSL STATUS                           Last modified at
-  ______________                           $Date: 2002/07/30 11:27:05 $
+  ______________                           $Date: 2002/12/30 23:54:11 $

  DEVELOPMENT STATE

    o  OpenSSL 0.9.8:  Under development...
-    o  OpenSSL 0.9.7-beta3: Released on July 30th, 2002
-    o  OpenSSL 0.9.7-beta2: Released on June 16th, 2002
-    o  OpenSSL 0.9.7-beta1: Released on June  1st, 2002
+    o  OpenSSL 0.9.7:  Released on December  31st, 2002
+    o  OpenSSL 0.9.6h: Released on December   5th, 2002
+    o  OpenSSL 0.9.6g: Released on August     9th, 2002
+    o  OpenSSL 0.9.6f: Released on August     8th, 2002
    o  OpenSSL 0.9.6e: Released on July      30th, 2002
    o  OpenSSL 0.9.6d: Released on May        9th, 2002
    o  OpenSSL 0.9.6c: Released on December  21st, 2001
@@ -26,8 +27,17 @@

  RELEASE SHOWSTOPPERS

-    o BN_mod_mul verification fails for mips3-sgi-irix
-      unless configured with no-asm
+    o [2002-11-21]
+      PR 343 mentions that scrubbing memory with 'memset(ptr, 0, n)' may
+      be optimized away in modern compilers.  This is definitely not good
+      and needs to be fixed immediately.  The formula to use is presented
+      in:
+
+      http://online.securityfocus.com/archive/82/297918/2002-10-27/2002-11-02/0
+
+      The problem report that mentions this is:
+
+      https://www.aet.TU-Cottbus.DE/rt2/Ticket/Display.html?id=343

  AVAILABLE PATCHES

@@ -50,9 +60,8 @@
 	UTIL (a new set of library functions to support some higher level
 	      functionality that is currently missing).
 	Shared library support for VMS.
-	Kerberos 5 authentication
+	Kerberos 5 authentication (Heimdal)
 	Constification
-	OCSP

  NEEDS PATCH

--- a/488
+++ b/488
--- a/apps/Makefile.ssl
+++ b/apps/Makefile.ssl
--- a/apps/apps.c
+++ b/apps/apps.c
@@ -114,9 +114,7 @@
 #include <string.h>
 #include <sys/types.h>
 #include <sys/stat.h>
-#define NON_MAIN
-#include "apps.h"
-#undef NON_MAIN
+#include <ctype.h>
 #include <openssl/err.h>
 #include <openssl/x509.h>
 #include <openssl/x509v3.h>
@@ -136,6 +134,10 @@
 #  endif /* NO_STRINGS_H */
 #endif

+#define NON_MAIN
+#include "apps.h"
+#undef NON_MAIN
+
 #ifdef OPENSSL_SYS_WINDOWS
 #  include "bss_file.c"
 #endif
@@ -335,8 +337,7 @@ void program_name(char *in, char *out, int size)
 		p++;
 	else
 		p=in;
-	strncpy(out,p,size-1);
-	out[size-1]='\0';
+	BUF_strlcpy(out,p,size);
 	}
 #endif
 #endif
@@ -344,6 +345,7 @@ void program_name(char *in, char *out, int size)
 #ifdef OPENSSL_SYS_WIN32
 int WIN32_rename(char *from, char *to)
 	{
+#ifndef OPENSSL_SYS_WINCE
 	/* Windows rename gives an error if 'to' exists, so delete it
 	 * first and ignore file not found errror
 	 */
@@ -351,6 +353,46 @@ int WIN32_rename(char *from, char *to)
 		return -1;
 #undef rename
 	return rename(from, to);
+#else
+	/* convert strings to UNICODE */
+	{
+	BOOL result = FALSE;
+	WCHAR* wfrom;
+	WCHAR* wto;
+	int i;
+	wfrom = malloc((strlen(from)+1)*2);
+	wto = malloc((strlen(to)+1)*2);
+	if (wfrom != NULL && wto != NULL)
+		{
+		for (i=0; i<(int)strlen(from)+1; i++)
+			wfrom[i] = (short)from[i];
+		for (i=0; i<(int)strlen(to)+1; i++)
+			wto[i] = (short)to[i];
+		result = MoveFile(wfrom, wto);
+		}
+	if (wfrom != NULL)
+		free(wfrom);
+	if (wto != NULL)
+		free(wto);
+	return result;
+	}
+#endif
+	}
+#endif
+
+#ifdef OPENSSL_SYS_VMS
+int VMS_strcasecmp(const char *str1, const char *str2)
+	{
+	while (*str1 && *str2)
+		{
+		int res = toupper(*str1) - toupper(*str2);
+		if (res) return res < 0 ? -1 : 1;
+		}
+	if (*str1)
+		return 1;
+	if (*str2)
+		return -1;
+	return 0;
 	}
 #endif

@@ -429,16 +471,20 @@ int app_init(long mesgwin)

 int dump_cert_text (BIO *out, X509 *x)
 {
-	char buf[256];
-	X509_NAME_oneline(X509_get_subject_name(x),buf,256);
-	BIO_puts(out,"subject=");
-	BIO_puts(out,buf);
+	char *p;

-	X509_NAME_oneline(X509_get_issuer_name(x),buf,256);
-	BIO_puts(out,"\nissuer= ");
-	BIO_puts(out,buf);
+	p=X509_NAME_oneline(X509_get_subject_name(x),NULL,0);
+	BIO_puts(out,"subject=");
+	BIO_puts(out,p);
+	OPENSSL_free(p);
+
+	p=X509_NAME_oneline(X509_get_issuer_name(x),NULL,0);
+	BIO_puts(out,"\nissuer=");
+	BIO_puts(out,p);
 	BIO_puts(out,"\n");
-        return 0;
+	OPENSSL_free(p);
+
+	return 0;
 }

 static int ui_open(UI *ui)
@@ -569,7 +615,7 @@ int password_callback(char *buf, int bufsiz, int verify,

 		if (buff)
 			{
-			memset(buff,0,(unsigned int)bufsiz);
+			OPENSSL_cleanse(buff,(unsigned int)bufsiz);
 			OPENSSL_free(buff);
 			}

@@ -579,13 +625,13 @@ int password_callback(char *buf, int bufsiz, int verify,
 			{
 			BIO_printf(bio_err, "User interface error\n");
 			ERR_print_errors(bio_err);
-			memset(buf,0,(unsigned int)bufsiz);
+			OPENSSL_cleanse(buf,(unsigned int)bufsiz);
 			res = 0;
 			}
 		if (ok == -2)
 			{
 			BIO_printf(bio_err,"aborted!\n");
-			memset(buf,0,(unsigned int)bufsiz);
+			OPENSSL_cleanse(buf,(unsigned int)bufsiz);
 			res = 0;
 			}
 		UI_free(ui);
@@ -798,7 +844,7 @@ end:
 	return(x);
 	}

-EVP_PKEY *load_key(BIO *err, const char *file, int format,
+EVP_PKEY *load_key(BIO *err, const char *file, int format, int maybe_stdin,
 	const char *pass, ENGINE *e, const char *key_descrip)
 	{
 	BIO *key=NULL;
@@ -808,7 +854,7 @@ EVP_PKEY *load_key(BIO *err, const char *file, int format,
 	cb_data.password = pass;
 	cb_data.prompt_info = file;

-	if (file == NULL)
+	if (file == NULL && (!maybe_stdin || format == FORMAT_ENGINE))
 		{
 		BIO_printf(err,"no keyfile specified\n");
 		goto end;
@@ -828,12 +874,19 @@ EVP_PKEY *load_key(BIO *err, const char *file, int format,
 		ERR_print_errors(err);
 		goto end;
 		}
-	if (BIO_read_filename(key,file) <= 0)
+	if (file == NULL && maybe_stdin)
 		{
-		BIO_printf(err, "Error opening %s %s\n", key_descrip, file);
-		ERR_print_errors(err);
-		goto end;
+		setvbuf(stdin, NULL, _IONBF, 0);
+		BIO_set_fp(key,stdin,BIO_NOCLOSE);
 		}
+	else
+		if (BIO_read_filename(key,file) <= 0)
+			{
+			BIO_printf(err, "Error opening %s %s\n",
+				key_descrip, file);
+			ERR_print_errors(err);
+			goto end;
+			}
 	if (format == FORMAT_ASN1)
 		{
 		pkey=d2i_PrivateKey_bio(key, NULL);
@@ -867,7 +920,7 @@ EVP_PKEY *load_key(BIO *err, const char *file, int format,
 	return(pkey);
 	}

-EVP_PKEY *load_pubkey(BIO *err, const char *file, int format,
+EVP_PKEY *load_pubkey(BIO *err, const char *file, int format, int maybe_stdin,
 	const char *pass, ENGINE *e, const char *key_descrip)
 	{
 	BIO *key=NULL;
@@ -877,7 +930,7 @@ EVP_PKEY *load_pubkey(BIO *err, const char *file, int format,
 	cb_data.password = pass;
 	cb_data.prompt_info = file;

-	if (file == NULL)
+	if (file == NULL && (!maybe_stdin || format == FORMAT_ENGINE))
 		{
 		BIO_printf(err,"no keyfile specified\n");
 		goto end;
@@ -897,11 +950,18 @@ EVP_PKEY *load_pubkey(BIO *err, const char *file, int format,
 		ERR_print_errors(err);
 		goto end;
 		}
-	if (BIO_read_filename(key,file) <= 0)
+	if (file == NULL && maybe_stdin)
 		{
-		BIO_printf(err, "Error opening %s %s\n", key_descrip, file);
-		ERR_print_errors(err);
-		goto end;
+		setvbuf(stdin, NULL, _IONBF, 0);
+		BIO_set_fp(key,stdin,BIO_NOCLOSE);
+		}
+	else
+		if (BIO_read_filename(key,file) <= 0)
+			{
+			BIO_printf(err, "Error opening %s %s\n",
+				key_descrip, file);
+			ERR_print_errors(err);
+			goto end;
 		}
 	if (format == FORMAT_ASN1)
 		{
@@ -946,7 +1006,7 @@ load_netscape_key(BIO *err, BIO *key, const char *file,
 		goto error;
 	for (;;)
 		{
-		if (!BUF_MEM_grow(buf,size+1024*10))
+		if (!BUF_MEM_grow_clean(buf,size+1024*10))
 			goto error;
 		i = BIO_read(key, &(buf->data[size]), 1024*10);
 		size += i;
@@ -1074,6 +1134,7 @@ int set_cert_ex(unsigned long *flags, const char *arg)
 		{ "no_extensions", X509_FLAG_NO_EXTENSIONS, 0},
 		{ "no_sigdump", X509_FLAG_NO_SIGDUMP, 0},
 		{ "no_aux", X509_FLAG_NO_AUX, 0},
+		{ "no_attributes", X509_FLAG_NO_ATTRIBUTES, 0},
 		{ "ext_default", X509V3_EXT_DEFAULT, X509V3_EXT_UNKNOWN_MASK},
 		{ "ext_error", X509V3_EXT_ERROR_UNKNOWN, X509V3_EXT_UNKNOWN_MASK},
 		{ "ext_parse", X509V3_EXT_PARSE_UNKNOWN, X509V3_EXT_UNKNOWN_MASK},
@@ -1220,6 +1281,7 @@ void print_name(BIO *out, char *title, X509_NAME *nm, unsigned long lflags)
 	char *buf;
 	char mline = 0;
 	int indent = 0;
+
 	if(title) BIO_puts(out, title);
 	if((lflags & XN_FLAG_SEP_MASK) == XN_FLAG_SEP_MULTILINE) {
 		mline = 1;
@@ -1341,3 +1403,18 @@ int load_config(BIO *err, CONF *cnf)
 		}
 	return 1;
 	}
+
+char *make_config_name()
+	{
+	const char *t=X509_get_default_cert_area();
+	char *p;
+
+	p=OPENSSL_malloc(strlen(t)+strlen(OPENSSL_CONF)+2);
+	strcpy(p,t);
+#ifndef OPENSSL_SYS_VMS
+	strcat(p,"/");
+#endif
+	strcat(p,OPENSSL_CONF);
+
+	return p;
+	}
--- a/apps/apps.h
+++ b/apps/apps.h
@@ -139,13 +139,21 @@ long app_RAND_load_files(char *file); /* `file' is a list of files to read,
 int WIN32_rename(char *oldname,char *newname);
 #endif

+/* VMS below version 7.0 doesn't have strcasecmp() */
+#ifdef OPENSSL_SYS_VMS
+#define strcasecmp(str1,str2) VMS_strcasecmp((str1),(str2))
+int VMS_strcasecmp(const char *str1, const char *str2);
+#endif
+
 #ifndef MONOLITH

 #define MAIN(a,v)	main(a,v)

 #ifndef NON_MAIN
+CONF *config=NULL;
 BIO *bio_err=NULL;
 #else
+extern CONF *config;
 extern BIO *bio_err;
 #endif

@@ -233,9 +241,9 @@ int app_passwd(BIO *err, char *arg1, char *arg2, char **pass1, char **pass2);
 int add_oid_section(BIO *err, CONF *conf);
 X509 *load_cert(BIO *err, const char *file, int format,
 	const char *pass, ENGINE *e, const char *cert_descrip);
-EVP_PKEY *load_key(BIO *err, const char *file, int format,
+EVP_PKEY *load_key(BIO *err, const char *file, int format, int maybe_stdin,
 	const char *pass, ENGINE *e, const char *key_descrip);
-EVP_PKEY *load_pubkey(BIO *err, const char *file, int format,
+EVP_PKEY *load_pubkey(BIO *err, const char *file, int format, int maybe_stdin,
 	const char *pass, ENGINE *e, const char *key_descrip);
 STACK_OF(X509) *load_certs(BIO *err, const char *file, int format,
 	const char *pass, ENGINE *e, const char *cert_descrip);
@@ -243,6 +251,7 @@ X509_STORE *setup_verify(BIO *bp, char *CAfile, char *CApath);
 ENGINE *setup_engine(BIO *err, const char *engine, int debug);

 int load_config(BIO *err, CONF *cnf);
+char *make_config_name(void);

 /* Functions defined in ca.c and also used in ocsp.c */
 int unpack_revinfo(ASN1_TIME **prevtm, int *preason, ASN1_OBJECT **phold,
--- a/apps/asn1pars.c
+++ b/apps/asn1pars.c
@@ -332,6 +332,6 @@ end:
 	if (osk != NULL) sk_free(osk);
 	OBJ_cleanup();
 	apps_shutdown();
-	EXIT(ret);
+	OPENSSL_EXIT(ret);
 	}

--- a/apps/ca.c
+++ b/apps/ca.c
@@ -64,7 +64,6 @@
 #include <ctype.h>
 #include <sys/types.h>
 #include <sys/stat.h>
-#include "apps.h"
 #include <openssl/conf.h>
 #include <openssl/bio.h>
 #include <openssl/err.h>
@@ -94,11 +93,13 @@
 #    else
 #      include <unixlib.h>
 #    endif
-#  elif !defined(OPENSSL_SYS_VXWORKS)
+#  elif !defined(OPENSSL_SYS_VXWORKS) && !defined(OPENSSL_SYS_WINDOWS)
 #    include <sys/file.h>
 #  endif
 #endif

+#include "apps.h"
+
 #ifndef W_OK
 #  define F_OK 0
 #  define X_OK 1
@@ -333,6 +334,7 @@ int MAIN(int argc, char **argv)
 	MS_STATIC char buf[3][BSIZE];
 	char *randfile=NULL;
 	char *engine = NULL;
+	char *tofree=NULL;

 #ifdef EFENCE
 EF_PROTECT_FREE=1;
@@ -560,25 +562,26 @@ bad:

 	ERR_load_crypto_strings();

-        e = setup_engine(bio_err, engine, 0);
+	e = setup_engine(bio_err, engine, 0);

 	/*****************************************************************/
+	tofree=NULL;
 	if (configfile == NULL) configfile = getenv("OPENSSL_CONF");
 	if (configfile == NULL) configfile = getenv("SSLEAY_CONF");
 	if (configfile == NULL)
 		{
-		/* We will just use 'buf[0]' as a temporary buffer.  */
+		const char *s=X509_get_default_cert_area();
+
 #ifdef OPENSSL_SYS_VMS
-		strncpy(buf[0],X509_get_default_cert_area(),
-			sizeof(buf[0])-1-sizeof(CONFIG_FILE));
+		tofree=OPENSSL_malloc(strlen(s)+sizeof(CONFIG_FILE));
+		strcpy(tofree,s);
 #else
-		strncpy(buf[0],X509_get_default_cert_area(),
-			sizeof(buf[0])-2-sizeof(CONFIG_FILE));
-		buf[0][sizeof(buf[0])-2-sizeof(CONFIG_FILE)]='\0';
-		strcat(buf[0],"/");
+		tofree=OPENSSL_malloc(strlen(s)+sizeof(CONFIG_FILE)+1);
+		strcpy(tofree,s);
+		strcat(tofree,"/");
 #endif
-		strcat(buf[0],CONFIG_FILE);
-		configfile=buf[0];
+		strcat(tofree,CONFIG_FILE);
+		configfile=tofree;
 		}

 	BIO_printf(bio_err,"Using configuration from %s\n",configfile);
@@ -593,6 +596,8 @@ bad:
 				,errorline,configfile);
 		goto err;
 		}
+	if(tofree)
+		OPENSSL_free(tofree);

 	if (!load_config(bio_err, conf))
 		goto err;
@@ -699,9 +704,9 @@ bad:
 			goto err;
 			}
 		}
-	pkey = load_key(bio_err, keyfile, keyform, key, e, 
+	pkey = load_key(bio_err, keyfile, keyform, 0, key, e, 
 		"CA private key");
-	if (key) memset(key,0,strlen(key));
+	if (key) OPENSSL_cleanse(key,strlen(key));
 	if (pkey == NULL)
 		{
 		/* load_key() has already printed an appropriate message */
@@ -1016,7 +1021,7 @@ bad:
 			}

 		if (verbose)
-			BIO_printf(bio_err, "Succesfully loaded extensions file %s\n", extfile);
+			BIO_printf(bio_err, "Successfully loaded extensions file %s\n", extfile);

 		/* We can have sections in the ext file */
 		if (!extensions && !(extensions = NCONF_get_string(extconf, "default", "extensions")))
@@ -1158,9 +1163,14 @@ bad:
 			}
 		if (verbose)
 			{
-			if ((f=BN_bn2hex(serial)) == NULL) goto err;
-			BIO_printf(bio_err,"next serial number is %s\n",f);
-			OPENSSL_free(f);
+			if (BN_is_zero(serial))
+				BIO_printf(bio_err,"next serial number is 00\n");
+			else
+				{
+				if ((f=BN_bn2hex(serial)) == NULL) goto err;
+				BIO_printf(bio_err,"next serial number is %s\n",f);
+				OPENSSL_free(f);
+				}
 			}

 		if ((attribs=NCONF_get_section(conf,policy)) == NULL)
@@ -1280,8 +1290,13 @@ bad:

 			BIO_printf(bio_err,"Write out database with %d new entries\n",sk_X509_num(cert_sk));

-			strncpy(buf[0],serialfile,BSIZE-4);
-			buf[0][BSIZE-4]='\0';
+			if(strlen(serialfile) > BSIZE-5 || strlen(dbfile) > BSIZE-5)
+				{
+				BIO_printf(bio_err,"file name too long\n");
+				goto err;
+				}
+
+			strcpy(buf[0],serialfile);

 #ifdef OPENSSL_SYS_VMS
 			strcat(buf[0],"-new");
@@ -1291,8 +1306,7 @@ bad:

 			if (!save_serial(buf[0],serial)) goto err;

-			strncpy(buf[1],dbfile,BSIZE-4);
-			buf[1][BSIZE-4]='\0';
+			strcpy(buf[1],dbfile);

 #ifdef OPENSSL_SYS_VMS
 			strcat(buf[1],"-new");
@@ -1322,8 +1336,13 @@ bad:
 			j=x->cert_info->serialNumber->length;
 			p=(char *)x->cert_info->serialNumber->data;
 			
-			strncpy(buf[2],outdir,BSIZE-(j*2)-6);
-			buf[2][BSIZE-(j*2)-6]='\0';
+			if(strlen(outdir) >= (size_t)(j ? BSIZE-j*2-6 : BSIZE-8))
+				{
+				BIO_printf(bio_err,"certificate file name too long\n");
+				goto err;
+				}
+
+			strcpy(buf[2],outdir);

 #ifndef OPENSSL_SYS_VMS
 			strcat(buf[2],"/");
@@ -1557,8 +1576,13 @@ bad:
 			if (j <= 0) goto err;
 			X509_free(revcert);

-			strncpy(buf[0],dbfile,BSIZE-4);
-			buf[0][BSIZE-4]='\0';
+			if(strlen(dbfile) > BSIZE-5)
+				{
+				BIO_printf(bio_err,"filename too long\n");
+				goto err;
+				}
+
+			strcpy(buf[0],dbfile);
 #ifndef OPENSSL_SYS_VMS
 			strcat(buf[0],".new");
 #else
@@ -1602,6 +1626,8 @@ bad:
 	/*****************************************************************/
 	ret=0;
 err:
+	if(tofree)
+		OPENSSL_free(tofree);
 	BIO_free_all(Cout);
 	BIO_free_all(Sout);
 	BIO_free_all(out);
@@ -1621,7 +1647,7 @@ err:
 	NCONF_free(conf);
 	OBJ_cleanup();
 	apps_shutdown();
-	EXIT(ret);
+	OPENSSL_EXIT(ret);
 	}

 static void lookup_fail(char *name, char *tag)
@@ -1686,7 +1712,7 @@ static BIGNUM *load_serial(char *serialfile)
 	ret=ASN1_INTEGER_to_BN(ai,NULL);
 	if (ret == NULL)
 		{
-		BIO_printf(bio_err,"error converting number from bin to BIGNUM");
+		BIO_printf(bio_err,"error converting number from bin to BIGNUM\n");
 		goto err;
 		}
 err:
@@ -2089,9 +2115,11 @@ again2:
 			}
 		}

-	row[DB_name]=X509_NAME_oneline(dn_subject,NULL,0);
-	row[DB_serial]=BN_bn2hex(serial);
-	if ((row[DB_name] == NULL) || (row[DB_serial] == NULL))
+	if (BN_is_zero(serial))
+		row[DB_serial]=BUF_strdup("00");
+	else
+		row[DB_serial]=BN_bn2hex(serial);
+	if (row[DB_serial] == NULL)
 		{
 		BIO_printf(bio_err,"Memory allocation failure\n");
 		goto err;
@@ -2304,10 +2332,10 @@ again2:

 	/* row[DB_serial] done already */
 	row[DB_file]=(char *)OPENSSL_malloc(8);
-	/* row[DB_name] done already */
+	row[DB_name]=X509_NAME_oneline(X509_get_subject_name(ret),NULL,0);

 	if ((row[DB_type] == NULL) || (row[DB_exp_date] == NULL) ||
-		(row[DB_file] == NULL))
+		(row[DB_file] == NULL) || (row[DB_name] == NULL))
 		{
 		BIO_printf(bio_err,"Memory allocation failure\n");
 		goto err;
@@ -2574,7 +2602,10 @@ static int do_revoke(X509 *x509, TXT_DB *db, int type, char *value)
 		row[i]=NULL;
 	row[DB_name]=X509_NAME_oneline(X509_get_subject_name(x509),NULL,0);
 	bn = ASN1_INTEGER_to_BN(X509_get_serialNumber(x509),NULL);
-	row[DB_serial]=BN_bn2hex(bn);
+	if (BN_is_zero(bn))
+		row[DB_serial]=BUF_strdup("00");
+	else
+		row[DB_serial]=BN_bn2hex(bn);
 	BN_free(bn);
 	if ((row[DB_name] == NULL) || (row[DB_serial] == NULL))
 		{
@@ -3043,55 +3074,59 @@ X509_NAME *do_subject(char *subject, long chtype)
 	sp++; /* skip leading / */

 	while (*sp)
-	{
+		{
 		/* collect type */
 		ne_types[ne_num] = bp;
 		while (*sp)
-		{
+			{
 			if (*sp == '\\') /* is there anything to escape in the type...? */
+				{
 				if (*++sp)
 					*bp++ = *sp++;
 				else
-				{
+					{
 					BIO_printf(bio_err, "escape character at end of string\n");
 					goto error;
+					}
 				}
 			else if (*sp == '=')
-			{
+				{
 				sp++;
 				*bp++ = '\0';
 				break;
-			}
+				}
 			else
 				*bp++ = *sp++;
-		}
+			}
 		if (!*sp)
-		{
+			{
 			BIO_printf(bio_err, "end of string encountered while processing type of subject name element #%d\n", ne_num);
 			goto error;
-		}
+			}
 		ne_values[ne_num] = bp;
 		while (*sp)
-		{
+			{
 			if (*sp == '\\')
+				{
 				if (*++sp)
 					*bp++ = *sp++;
 				else
-				{
+					{
 					BIO_printf(bio_err, "escape character at end of string\n");
 					goto error;
+					}
 				}
 			else if (*sp == '/')
-			{
+				{
 				sp++;
 				break;
-			}
+				}
 			else
 				*bp++ = *sp++;
-		}
+			}
 		*bp++ = '\0';
 		ne_num++;
-	}
+		}

 	if (!(n = X509_NAME_new()))
 		goto error;
--- a/apps/ciphers.c
+++ b/apps/ciphers.c
@@ -187,7 +187,7 @@ int MAIN(int argc, char **argv)
 			{
 			BIO_puts(STDout,SSL_CIPHER_description(
 				sk_SSL_CIPHER_value(sk,i),
-				buf,512));
+				buf,sizeof buf));
 			}
 		}

@@ -203,6 +203,6 @@ end:
 	if (ssl != NULL) SSL_free(ssl);
 	if (STDout != NULL) BIO_free_all(STDout);
 	apps_shutdown();
-	EXIT(ret);
+	OPENSSL_EXIT(ret);
 	}

--- a/apps/crl.c
+++ b/apps/crl.c
@@ -377,7 +377,7 @@ end:
 		X509_STORE_free(store);
 	}
 	apps_shutdown();
-	EXIT(ret);
+	OPENSSL_EXIT(ret);
 	}

 static X509_CRL *load_crl(char *infile, int format)
--- a/apps/crl2p7.c
+++ b/apps/crl2p7.c
@@ -280,7 +280,7 @@ end:
 	if (crl != NULL) X509_CRL_free(crl);

 	apps_shutdown();
-	EXIT(ret);
+	OPENSSL_EXIT(ret);
 	}

 /*
--- a/apps/dgst.c
+++ b/apps/dgst.c
@@ -117,7 +117,7 @@ int MAIN(int argc, char **argv)
 		goto end;

 	/* first check the program name */
-	program_name(argv[0],pname,PROG_NAME_SIZE);
+	program_name(argv[0],pname,sizeof pname);

 	md=EVP_get_digestbyname(pname);

@@ -277,10 +277,10 @@ int MAIN(int argc, char **argv)
 	if(keyfile)
 		{
 		if (want_pub)
-			sigkey = load_pubkey(bio_err, keyfile, keyform, NULL,
+			sigkey = load_pubkey(bio_err, keyfile, keyform, 0, NULL,
 				e, "key file");
 		else
-			sigkey = load_key(bio_err, keyfile, keyform, NULL,
+			sigkey = load_key(bio_err, keyfile, keyform, 0, NULL,
 				e, "key file");
 		if (!sigkey)
 			{
@@ -356,7 +356,7 @@ int MAIN(int argc, char **argv)
 end:
 	if (buf != NULL)
 		{
-		memset(buf,0,BUFSIZE);
+		OPENSSL_cleanse(buf,BUFSIZE);
 		OPENSSL_free(buf);
 		}
 	if (in != NULL) BIO_free(in);
@@ -365,7 +365,7 @@ end:
 	if(sigbuf) OPENSSL_free(sigbuf);
 	if (bmd != NULL) BIO_free(bmd);
 	apps_shutdown();
-	EXIT(err);
+	OPENSSL_EXIT(err);
 	}

 int do_fp(BIO *out, unsigned char *buf, BIO *bp, int sep, int binout,
--- a/apps/dh.c
+++ b/apps/dh.c
@@ -333,6 +333,6 @@ end:
 	if (out != NULL) BIO_free_all(out);
 	if (dh != NULL) DH_free(dh);
 	apps_shutdown();
-	EXIT(ret);
+	OPENSSL_EXIT(ret);
 	}
 #endif
--- a/apps/dhparam.c
+++ b/apps/dhparam.c
@@ -519,7 +519,7 @@ end:
 	if (out != NULL) BIO_free_all(out);
 	if (dh != NULL) DH_free(dh);
 	apps_shutdown();
-	EXIT(ret);
+	OPENSSL_EXIT(ret);
 	}

 /* dh_cb is identical to dsa_cb in apps/dsaparam.c */
--- a/apps/dsa.c
+++ b/apps/dsa.c
@@ -314,6 +314,6 @@ end:
 	if(passin) OPENSSL_free(passin);
 	if(passout) OPENSSL_free(passout);
 	apps_shutdown();
-	EXIT(ret);
+	OPENSSL_EXIT(ret);
 	}
 #endif
--- a/apps/dsaparam.c
+++ b/apps/dsaparam.c
@@ -372,7 +372,7 @@ end:
 	if (out != NULL) BIO_free_all(out);
 	if (dsa != NULL) DSA_free(dsa);
 	apps_shutdown();
-	EXIT(ret);
+	OPENSSL_EXIT(ret);
 	}

 static void MS_CALLBACK dsa_cb(int p, int n, void *arg)
--- a/apps/enc.c
+++ b/apps/enc.c
@@ -102,7 +102,7 @@ int MAIN(int argc, char **argv)
 	{
 	ENGINE *e = NULL;
 	static const char magic[]="Salted__";
-	char mbuf[8];	/* should be 1 smaller than magic */
+	char mbuf[sizeof magic-1];
 	char *strbuf=NULL;
 	unsigned char *buff=NULL,*bufsize=NULL;
 	int bsize=BSIZE,verbose=0;
@@ -131,7 +131,7 @@ int MAIN(int argc, char **argv)
 		goto end;

 	/* first check the program name */
-	program_name(argv[0],pname,PROG_NAME_SIZE);
+	program_name(argv[0],pname,sizeof pname);
 	if (strcmp(pname,"base64") == 0)
 		base64=1;

@@ -216,7 +216,7 @@ int MAIN(int argc, char **argv)
 				goto bad;
 				}
 			buf[0]='\0';
-			fgets(buf,128,infile);
+			fgets(buf,sizeof buf,infile);
 			fclose(infile);
 			i=strlen(buf);
 			if ((i > 0) &&
@@ -442,12 +442,12 @@ bad:
 			else {
 				if(enc) {
 					if(hsalt) {
-						if(!set_hex(hsalt,salt,PKCS5_SALT_LEN)) {
+						if(!set_hex(hsalt,salt,sizeof salt)) {
 							BIO_printf(bio_err,
 								"invalid hex salt value\n");
 							goto end;
 						}
-					} else if (RAND_pseudo_bytes(salt, PKCS5_SALT_LEN) < 0)
+					} else if (RAND_pseudo_bytes(salt, sizeof salt) < 0)
 						goto end;
 					/* If -P option then don't bother writing */
 					if((printkey != 2)
@@ -455,14 +455,14 @@ bad:
 							 sizeof magic-1) != sizeof magic-1
 					       || BIO_write(wbio,
 							    (char *)salt,
-							    PKCS5_SALT_LEN) != PKCS5_SALT_LEN)) {
+							    sizeof salt) != sizeof salt)) {
 						BIO_printf(bio_err,"error writing output file\n");
 						goto end;
 					}
 				} else if(BIO_read(rbio,mbuf,sizeof mbuf) != sizeof mbuf
 					  || BIO_read(rbio,
 						      (unsigned char *)salt,
-				    PKCS5_SALT_LEN) != PKCS5_SALT_LEN) {
+				    sizeof salt) != sizeof salt) {
 					BIO_printf(bio_err,"error reading input file\n");
 					goto end;
 				} else if(memcmp(mbuf,magic,sizeof magic-1)) {
@@ -481,9 +481,9 @@ bad:
 			 * bug picked up by
 			 * Larry J. Hughes Jr. <hughes@indiana.edu> */
 			if (str == strbuf)
-				memset(str,0,SIZE);
+				OPENSSL_cleanse(str,SIZE);
 			else
-				memset(str,0,strlen(str));
+				OPENSSL_cleanse(str,strlen(str));
 			}
 		if ((hiv != NULL) && !set_hex(hiv,iv,sizeof iv))
 			{
@@ -524,7 +524,7 @@ bad:
 			if (!nosalt)
 				{
 				printf("salt=");
-				for (i=0; i<PKCS5_SALT_LEN; i++)
+				for (i=0; i<sizeof salt; i++)
 					printf("%02X",salt[i]);
 				printf("\n");
 				}
@@ -586,7 +586,7 @@ end:
 	if (b64 != NULL) BIO_free(b64);
 	if(pass) OPENSSL_free(pass);
 	apps_shutdown();
-	EXIT(ret);
+	OPENSSL_EXIT(ret);
 	}

 int set_hex(char *in, unsigned char *out, int size)
--- a/apps/engine.c
+++ b/apps/engine.c
@@ -516,5 +516,5 @@ end:
 	sk_pop_free(post_cmds, identity);
 	if (bio_out != NULL) BIO_free_all(bio_out);
 	apps_shutdown();
-	EXIT(ret);
+	OPENSSL_EXIT(ret);
 	}
--- a/apps/errstr.c
+++ b/apps/errstr.c
@@ -122,5 +122,5 @@ int MAIN(int argc, char **argv)
 			}
 		}
 	apps_shutdown();
-	EXIT(ret);
+	OPENSSL_EXIT(ret);
 	}
--- a/apps/gendh.c
+++ b/apps/gendh.c
@@ -198,7 +198,7 @@ end:
 	if (out != NULL) BIO_free_all(out);
 	if (dh != NULL) DH_free(dh);
 	apps_shutdown();
-	EXIT(ret);
+	OPENSSL_EXIT(ret);
 	}

 static void MS_CALLBACK dh_cb(int p, int n, void *arg)
--- a/apps/gendsa.c
+++ b/apps/gendsa.c
@@ -246,6 +246,6 @@ end:
 	if (dsa != NULL) DSA_free(dsa);
 	if(passout) OPENSSL_free(passout);
 	apps_shutdown();
-	EXIT(ret);
+	OPENSSL_EXIT(ret);
 	}
 #endif
--- a/apps/genrsa.c
+++ b/apps/genrsa.c
@@ -258,7 +258,7 @@ err:
 	if (ret != 0)
 		ERR_print_errors(bio_err);
 	apps_shutdown();
-	EXIT(ret);
+	OPENSSL_EXIT(ret);
 	}

 static void MS_CALLBACK genrsa_cb(int p, int n, void *arg)
--- a/apps/makeapps.com
+++ b/apps/makeapps.com
@@ -15,22 +15,10 @@ $!
 $!  It was written so it would try to determine what "C" compiler to
 $!  use or you can specify which "C" compiler to use.
 $!
-$!  Specify RSAREF as P1 to compile with the RSAREF library instead of
-$!  the regular one.  If you specify NORSAREF it will compile with the
-$!  regular RSAREF routines.  (Note: If you are in the United States
-$!  you MUST compile with RSAREF unless you have a license from RSA).
-$!
-$!  Note: The RSAREF libraries are NOT INCLUDED and you have to
-$!        download it from "ftp://ftp.rsa.com/rsaref".  You have to
-$!        get the ".tar-Z" file as the ".zip" file dosen't have the
-$!        directory structure stored.  You have to extract the file
-$!        into the [.RSAREF] directory under the root directory as that
-$!        is where the scripts will look for the files.
-$!
-$!  Specify DEBUG or NODEBUG as P2 to compile with or without debugger
+$!  Specify DEBUG or NODEBUG as P1 to compile with or without debugger
 $!  information.
 $!
-$!  Specify which compiler at P3 to try to compile under.
+$!  Specify which compiler at P2 to try to compile under.
 $!
 $!	   VAXC	 For VAX C.
 $!	   DECC	 For DEC C.
@@ -39,16 +27,16 @@ $!
 $!  If you don't speficy a compiler, it will try to determine which
 $!  "C" compiler to use.
 $!
-$!  P4, if defined, sets a TCP/IP library to use, through one of the following
+$!  P3, if defined, sets a TCP/IP library to use, through one of the following
 $!  keywords:
 $!
 $!	UCX		for UCX
 $!	SOCKETSHR	for SOCKETSHR+NETLIB
 $!	TCPIP		for TCPIP (post UCX)
 $!
-$!  P5, if defined, sets a compiler thread NOT needed on OpenVMS 7.1 (and up)
+$!  P4, if defined, sets a compiler thread NOT needed on OpenVMS 7.1 (and up)
 $!
-$!  P6, if defined, sets a choice of programs to compile.
+$!  P5, if defined, sets a choice of programs to compile.
 $!
 $!
 $! Define A TCP/IP Library That We Will Need To Link To.
@@ -101,10 +89,6 @@ $! Define The CRYPTO Library.
 $!
 $ CRYPTO_LIB := SYS$DISK:[-.'ARCH'.EXE.CRYPTO]LIBCRYPTO.OLB
 $!
-$! Define The RSAREF Library.
-$!
-$ RSAREF_LIB := SYS$DISK:[-.'ARCH'.EXE.RSAREF]LIBRSAGLUE.OLB
-$!
 $! Define The SSL Library.
 $!
 $ SSL_LIB := SYS$DISK:[-.'ARCH'.EXE.SSL]LIBSSL.OLB
@@ -182,7 +166,7 @@ $!     TCPIP_PROGRAMS = ",S_SERVER,S_CLIENT,SESS_ID,CIPHERS,S_TIME,"
 $!
 $! Setup exceptional compilations
 $!
-$ COMPILEWITH_CC2 = ",S_SOCKET,S_SERVER,S_CLIENT,"
+$ COMPILEWITH_CC2 = ",S_SERVER,S_CLIENT,"
 $!
 $ PHASE := LIB
 $!
@@ -293,73 +277,31 @@ $   WRITE SYS$OUTPUT FILE_NAME," needs a TCP/IP library.  Can't link.  Skipping.
 $   GOTO NEXT_FILE
 $ ENDIF
 $!
-$! Link The Program, Check To See If We Need To Link With RSAREF Or Not.
+$! Link The Program.
+$! Check To See If We Are To Link With A Specific TCP/IP Library.
 $!
-$ IF (RSAREF.EQS."TRUE")
+$ IF (TCPIP_LIB.NES."")
 $ THEN
 $!
-$!  Check To See If We Are To Link With A Specific TCP/IP Library.
+$! Don't Link With The RSAREF Routines And TCP/IP Library.
 $!
-$   IF (TCPIP_LIB.NES."")
-$   THEN
-$!
-$!    Link With The RSAREF Library And A Specific TCP/IP Library.
-$!
-$     LINK/'DEBUGGER'/'TRACEBACK' /EXE='EXE_FILE' -
-	  'OBJECT_FILE''EXTRA_OBJ', -
-          'SSL_LIB'/LIBRARY,'CRYPTO_LIB'/LIBRARY,'RSAREF_LIB'/LIBRARY, -
-          'TCPIP_LIB','OPT_FILE'/OPTION
-$!
-$!  Else...
-$!
-$   ELSE
-$!
-$!    Link With The RSAREF Library And NO TCP/IP Library.
-$!
-$     LINK/'DEBUGGER'/'TRACEBACK' /EXE='EXE_FILE' -
-	  'OBJECT_FILE''EXTRA_OBJ', -
-          'SSL_LIB'/LIBRARY,'CRYPTO_LIB'/LIBRARY,'RSAREF_LIB'/LIBRARY, -
-          'OPT_FILE'/OPTION
-$!
-$!  End The TCP/IP Library Check.
-$!
-$   ENDIF
+$   LINK/'DEBUGGER'/'TRACEBACK' /EXE='EXE_FILE' -
+	'OBJECT_FILE''EXTRA_OBJ', -
+        'SSL_LIB'/LIBRARY,'CRYPTO_LIB'/LIBRARY, -
+        'TCPIP_LIB','OPT_FILE'/OPTION
 $!
 $! Else...
 $!
 $ ELSE
 $!
-$!  Don't Link With The RSAREF Routines.
+$! Don't Link With The RSAREF Routines And Link With A TCP/IP Library.
 $!
+$   LINK/'DEBUGGER'/'TRACEBACK' /EXE='EXE_FILE' -
+	'OBJECT_FILE''EXTRA_OBJ', -
+        'SSL_LIB'/LIBRARY,'CRYPTO_LIB'/LIBRARY, -
+        'OPT_FILE'/OPTION
 $!
-$!  Check To See If We Are To Link With A Specific TCP/IP Library.
-$!
-$   IF (TCPIP_LIB.NES."")
-$   THEN
-$!
-$!    Don't Link With The RSAREF Routines And TCP/IP Library.
-$!
-$       LINK/'DEBUGGER'/'TRACEBACK' /EXE='EXE_FILE' -
-	    'OBJECT_FILE''EXTRA_OBJ', -
-            'SSL_LIB'/LIBRARY,'CRYPTO_LIB'/LIBRARY, -
-            'TCPIP_LIB','OPT_FILE'/OPTION
-$!
-$!  Else...
-$!
-$   ELSE
-$!
-$!    Don't Link With The RSAREF Routines And Link With A TCP/IP Library.
-$!
-$       LINK/'DEBUGGER'/'TRACEBACK' /EXE='EXE_FILE' -
-	    'OBJECT_FILE''EXTRA_OBJ', -
-            'SSL_LIB'/LIBRARY,'CRYPTO_LIB'/LIBRARY, -
-            'OPT_FILE'/OPTION
-$!
-$!  End The TCP/IP Library Check.
-$!
-$   ENDIF
-$!
-$! End The RSAREF Link Check.
+$! End The TCP/IP Library Check.
 $!
 $ ENDIF
 $!
@@ -526,32 +468,6 @@ $! End The Crypto Library Check.
 $!
 $ ENDIF
 $!
-$! See If We Need The RSAREF Library.
-$!
-$ IF (RSAREF.EQS."TRUE")
-$ THEN
-$!
-$!  Look For The Library LIBRSAGLUE.OLB.
-$!
-$   IF (F$SEARCH(RSAREF_LIB).EQS."")
-$   THEN
-$!
-$!    Tell The User We Can't Find The LIBRSAGLUE.OLB Library.
-$!
-$     WRITE SYS$OUTPUT ""
-$     WRITE SYS$OUTPUT "Can't Find The Library ",RSAREF_LIB,"."
-$     WRITE SYS$OUTPUT "We Can't Link Without It."
-$     WRITE SYS$OUTPUT ""
-$!
-$!    Since We Can't Link Without It, Exit.
-$!
-$     EXIT
-$   ENDIF
-$!
-$! End The RSAREF Library Check.
-$!
-$ ENDIF
-$!
 $! Look For The Library LIBSSL.OLB.
 $!
 $ IF (F$SEARCH(SSL_LIB).EQS."")
@@ -582,87 +498,10 @@ $ CHECK_OPTIONS:
 $!
 $! Check To See If P1 Is Blank.
 $!
-$ P1 = "NORSAREF"
-$ IF (P1.EQS."NORSAREF")
+$ IF (P1.EQS."NODEBUG")
 $ THEN
 $!
-$!   P1 Is NORSAREF, So Compile With The Regular RSA Libraries.
-$!
-$    RSAREF = "FALSE"
-$!
-$! Else...
-$!
-$ ELSE
-$!
-$!  Check To See If We Are To Use The RSAREF Library.
-$!
-$   IF (P1.EQS."RSAREF")
-$   THEN
-$!
-$!    Check To Make Sure We Have The RSAREF Source Code Directory.
-$!
-$     IF (F$SEARCH("SYS$DISK:[-.RSAREF]SOURCE.DIR").EQS."")
-$     THEN
-$!
-$!      We Don't Have The RSAREF Souce Code Directory, So Tell The
-$!      User This.
-$!
-$       WRITE SYS$OUTPUT ""
-$       WRITE SYS$OUTPUT "It appears that you don't have the RSAREF Souce Code."
-$       WRITE SYS$OUTPUT "You need to go to 'ftp://ftp.rsa.com/rsaref'.  You have to"
-$       WRITE SYS$OUTPUT "get the '.tar-Z' file as the '.zip' file dosen't have the"
-$       WRITE SYS$OUTPUT "directory structure stored.  You have to extract the file"
-$       WRITE SYS$OUTPUT "into the [.RSAREF] directory under the root directory"
-$       WRITE SYS$OUTPUT "as that is where the scripts will look for the files."
-$       WRITE SYS$OUTPUT ""
-$!
-$!      Time To Exit.
-$!
-$       EXIT
-$!
-$!    Else...
-$!
-$     ELSE
-$!
-$!      Compile Using The RSAREF Library.
-$!
-$       RSAREF = "TRUE"
-$!
-$!    End The RSAREF Soure Directory Check.
-$!
-$     ENDIF
-$!
-$!  Else...
-$!
-$   ELSE 
-$!
-$!    They Entered An Invalid Option..
-$!
-$     WRITE SYS$OUTPUT ""
-$     WRITE SYS$OUTPUT "The Option ",P1," Is Invalid.  The Valid Options Are:"
-$     WRITE SYS$OUTPUT ""
-$     WRITE SYS$OUTPUT "     RSAREF   :  Compile With The RSAREF Library."
-$     WRITE SYS$OUTPUT "     NORSAREF :  Compile With The Regular RSA Library."
-$     WRITE SYS$OUTPUT ""
-$!
-$!    Time To EXIT.
-$!
-$     EXIT
-$!
-$!  End The Valid Arguement Check.
-$!
-$   ENDIF
-$!
-$! End P1 Check.
-$!
-$ ENDIF
-$!
-$! Check To See If P2 Is Blank.
-$!
-$ IF (P2.EQS."NODEBUG")
-$ THEN
-$!
-$!   P2 Is NODEBUG, So Compile Without Debugger Information.
+$!   P1 Is NODEBUG, So Compile Without Debugger Information.
 $!
 $    DEBUGGER  = "NODEBUG"
 $    TRACEBACK = "NOTRACEBACK" 
@@ -677,7 +516,7 @@ $ ELSE
 $!
 $!  Check To See If We Are To Compile With Debugger Information.
 $!
-$   IF (P2.EQS."DEBUG")
+$   IF (P1.EQS."DEBUG")
 $   THEN
 $!
 $!    Compile With Debugger Information.
@@ -693,7 +532,7 @@ $!
 $!    Tell The User Entered An Invalid Option..
 $!
 $     WRITE SYS$OUTPUT ""
-$     WRITE SYS$OUTPUT "The Option ",P2," Is Invalid.  The Valid Options Are:"
+$     WRITE SYS$OUTPUT "The Option ",P1," Is Invalid.  The Valid Options Are:"
 $     WRITE SYS$OUTPUT ""
 $     WRITE SYS$OUTPUT "    DEBUG    :  Compile With The Debugger Information."
 $     WRITE SYS$OUTPUT "    NODEBUG  :  Compile Without The Debugger Information."
@@ -707,13 +546,13 @@ $!  End The Valid Arguement Check.
 $!
 $   ENDIF
 $!
-$! End The P2 Check.
+$! End The P1 Check.
 $!
 $ ENDIF
 $!
-$! Check To See If P3 Is Blank.
+$! Check To See If P2 Is Blank.
 $!
-$ IF (P3.EQS."")
+$ IF (P2.EQS."")
 $ THEN
 $!
 $!  O.K., The User Didn't Specify A Compiler, Let's Try To
@@ -726,7 +565,7 @@ $   THEN
 $!
 $!    Looks Like GNUC, Set To Use GNUC.
 $!
-$     P3 = "GNUC"
+$     P2 = "GNUC"
 $!
 $!  Else...
 $!
@@ -739,7 +578,7 @@ $     THEN
 $!
 $!      Looks Like DECC, Set To Use DECC.
 $!
-$       P3 = "DECC"
+$       P2 = "DECC"
 $!
 $!    Else...
 $!
@@ -747,7 +586,7 @@ $     ELSE
 $!
 $!      Looks Like VAXC, Set To Use VAXC.
 $!
-$       P3 = "VAXC"
+$       P2 = "VAXC"
 $!
 $!    End The VAXC Compiler Check.
 $!
@@ -761,9 +600,9 @@ $!  End The Compiler Check.
 $!
 $ ENDIF
 $!
-$! Check To See If We Have A Option For P4.
+$! Check To See If We Have A Option For P3.
 $!
-$ IF (P4.EQS."")
+$ IF (P3.EQS."")
 $ THEN
 $!
 $!  Find out what socket library we have available
@@ -773,7 +612,7 @@ $   THEN
 $!
 $!    We have SOCKETSHR, and it is my opinion that it's the best to use.
 $!
-$     P4 = "SOCKETSHR"
+$     P3 = "SOCKETSHR"
 $!
 $!    Tell the user
 $!
@@ -793,7 +632,7 @@ $     THEN
 $!
 $!	Last resort: a UCX or UCX-compatible library
 $!
-$	P4 = "UCX"
+$	P3 = "UCX"
 $!
 $!      Tell the user
 $!
@@ -817,12 +656,12 @@ $ IF F$TYPE(USER_CCDISABLEWARNINGS) .NES. "" THEN -
 $!
 $!  Check To See If The User Entered A Valid Paramter.
 $!
-$ IF (P3.EQS."VAXC").OR.(P3.EQS."DECC").OR.(P3.EQS."GNUC")
+$ IF (P2.EQS."VAXC").OR.(P2.EQS."DECC").OR.(P2.EQS."GNUC")
 $ THEN
 $!
 $!  Check To See If The User Wanted DECC.
 $!
-$   IF (P3.EQS."DECC")
+$   IF (P2.EQS."DECC")
 $   THEN
 $!
 $!    Looks Like DECC, Set To Use DECC.
@@ -852,7 +691,7 @@ $   ENDIF
 $!
 $!  Check To See If We Are To Use VAXC.
 $!
-$   IF (P3.EQS."VAXC")
+$   IF (P2.EQS."VAXC")
 $   THEN
 $!
 $!    Looks Like VAXC, Set To Use VAXC.
@@ -889,7 +728,7 @@ $   ENDIF
 $!
 $!  Check To See If We Are To Use GNU C.
 $!
-$   IF (P3.EQS."GNUC")
+$   IF (P2.EQS."GNUC")
 $   THEN
 $!
 $!    Looks Like GNUC, Set To Use GNUC.
@@ -918,31 +757,6 @@ $!  Set up default defines
 $!
 $   CCDEFS = """FLAT_INC=1""," + CCDEFS
 $!
-$!  Check To See If We Are To Compile With RSAREF Routines.
-$!
-$   IF (RSAREF.EQS."TRUE")
-$   THEN
-$!
-$!    Compile With RSAREF.
-$!
-$     CCDEFS = CCDEFS + ",""RSAref=1"""
-$!
-$!    Tell The User This.
-$!
-$     WRITE SYS$OUTPUT "Compiling With RSAREF Routines."
-$!
-$!    Else, We Don't Care.  Compile Without The RSAREF Library.
-$!
-$   ELSE
-$!
-$!    Tell The User We Are Compile Without The RSAREF Routines.
-$!
-$     WRITE SYS$OUTPUT "Compiling Without The RSAREF Routines.
-$!
-$!  End The RSAREF Check.
-$!
-$   ENDIF
-$!
 $!  Else The User Entered An Invalid Arguement.
 $!
 $ ELSE
@@ -950,7 +764,7 @@ $!
 $!  Tell The User We Don't Know What They Want.
 $!
 $   WRITE SYS$OUTPUT ""
-$   WRITE SYS$OUTPUT "The Option ",P3," Is Invalid.  The Valid Options Are:"
+$   WRITE SYS$OUTPUT "The Option ",P2," Is Invalid.  The Valid Options Are:"
 $   WRITE SYS$OUTPUT ""
 $   WRITE SYS$OUTPUT "    VAXC  :  To Compile With VAX C."
 $   WRITE SYS$OUTPUT "    DECC  :  To Compile With DEC C."
@@ -964,13 +778,13 @@ $ ENDIF
 $!
 $! Time to check the contents, and to make sure we get the correct library.
 $!
-$ IF P4.EQS."SOCKETSHR" .OR. P4.EQS."MULTINET" .OR. P4.EQS."UCX" -
-     .OR. P4.EQS."TCPIP" .OR. P4.EQS."NONE"
+$ IF P3.EQS."SOCKETSHR" .OR. P3.EQS."MULTINET" .OR. P3.EQS."UCX" -
+     .OR. P3.EQS."TCPIP" .OR. P3.EQS."NONE"
 $ THEN
 $!
 $!  Check to see if SOCKETSHR was chosen
 $!
-$   IF P4.EQS."SOCKETSHR"
+$   IF P3.EQS."SOCKETSHR"
 $   THEN
 $!
 $!    Set the library to use SOCKETSHR
@@ -983,12 +797,12 @@ $   ENDIF
 $!
 $!  Check to see if MULTINET was chosen
 $!
-$   IF P4.EQS."MULTINET"
+$   IF P3.EQS."MULTINET"
 $   THEN
 $!
 $!    Set the library to use UCX emulation.
 $!
-$     P4 = "UCX"
+$     P3 = "UCX"
 $!
 $!    Done with MULTINET
 $!
@@ -996,7 +810,7 @@ $   ENDIF
 $!
 $!  Check to see if UCX was chosen
 $!
-$   IF P4.EQS."UCX"
+$   IF P3.EQS."UCX"
 $   THEN
 $!
 $!    Set the library to use UCX.
@@ -1016,7 +830,7 @@ $   ENDIF
 $!
 $!  Check to see if TCPIP (post UCX) was chosen
 $!
-$   IF P4.EQS."TCPIP"
+$   IF P3.EQS."TCPIP"
 $   THEN
 $!
 $!    Set the library to use TCPIP.
@@ -1029,7 +843,7 @@ $   ENDIF
 $!
 $!  Check to see if NONE was chosen
 $!
-$   IF P4.EQS."NONE"
+$   IF P3.EQS."NONE"
 $   THEN
 $!
 $!    Do not use TCPIP.
@@ -1042,7 +856,7 @@ $   ENDIF
 $!
 $!  Add TCP/IP type to CC definitions.
 $!
-$   CCDEFS = CCDEFS + ",TCPIP_TYPE_''P4'"
+$   CCDEFS = CCDEFS + ",TCPIP_TYPE_''P3'"
 $!
 $!  Print info
 $!
@@ -1055,7 +869,7 @@ $!
 $!  Tell The User We Don't Know What They Want.
 $!
 $   WRITE SYS$OUTPUT ""
-$   WRITE SYS$OUTPUT "The Option ",P4," Is Invalid.  The Valid Options Are:"
+$   WRITE SYS$OUTPUT "The Option ",P3," Is Invalid.  The Valid Options Are:"
 $   WRITE SYS$OUTPUT ""
 $   WRITE SYS$OUTPUT "    SOCKETSHR  :  To link with SOCKETSHR TCP/IP library."
 $   WRITE SYS$OUTPUT "    UCX        :  To link with UCX TCP/IP library."
@@ -1086,7 +900,7 @@ $ CC = CC + "/DEFINE=(" + CCDEFS + ")" + CCDISABLEWARNINGS
 $!
 $! Show user the result
 $!
-$ WRITE SYS$OUTPUT "Main Compiling Command: ",CC
+$ WRITE/SYMBOL SYS$OUTPUT "Main Compiling Command: ",CC
 $!
 $! Special Threads For OpenVMS v7.1 Or Later
 $!
@@ -1094,9 +908,9 @@ $! Written By:  Richard Levitte
 $!              richard@levitte.org
 $!
 $!
-$! Check To See If We Have A Option For P5.
+$! Check To See If We Have A Option For P4.
 $!
-$ IF (P5.EQS."")
+$ IF (P4.EQS."")
 $ THEN
 $!
 $!  Get The Version Of VMS We Are Using.
@@ -1118,15 +932,15 @@ $!  End The VMS Version Check.
 $!
 $   ENDIF
 $!
-$! End The P5 Check.
+$! End The P4 Check.
 $!
 $ ENDIF
 $!
 $! Check if the user wanted to compile just a subset of all the programs.
 $!
-$ IF P6 .NES. ""
+$ IF P5 .NES. ""
 $ THEN
-$   PROGRAMS = P6
+$   PROGRAMS = P5
 $ ENDIF
 $!
 $!  Time To RETURN...
--- a/apps/nseq.c
+++ b/apps/nseq.c
@@ -102,7 +102,7 @@ int MAIN(int argc, char **argv)
 		BIO_printf (bio_err, "-in file  input file\n");
 		BIO_printf (bio_err, "-out file output file\n");
 		BIO_printf (bio_err, "-toseq    output NS Sequence file\n");
-		EXIT(1);
+		OPENSSL_EXIT(1);
 	}

 	if (infile) {
@@ -162,6 +162,6 @@ end:
 	BIO_free_all(out);
 	NETSCAPE_CERT_SEQUENCE_free(seq);

-	EXIT(ret);
+	OPENSSL_EXIT(ret);
 }

--- a/apps/ocsp.c
+++ b/apps/ocsp.c
@@ -613,11 +613,11 @@ int MAIN(int argc, char **argv)
 			NULL, e, "CA certificate");
 		if (rcertfile)
 			{
-			rother = load_certs(bio_err, sign_certfile, FORMAT_PEM,
+			rother = load_certs(bio_err, rcertfile, FORMAT_PEM,
 				NULL, e, "responder other certificates");
-			if (!sign_other) goto end;
+			if (!rother) goto end;
 			}
-		rkey = load_key(bio_err, rkeyfile, FORMAT_PEM, NULL, NULL,
+		rkey = load_key(bio_err, rkeyfile, FORMAT_PEM, 0, NULL, NULL,
 			"responder private key");
 		if (!rkey)
 			goto end;
@@ -663,7 +663,7 @@ int MAIN(int argc, char **argv)
 				NULL, e, "signer certificates");
 			if (!sign_other) goto end;
 			}
-		key = load_key(bio_err, keyfile, FORMAT_PEM, NULL, NULL,
+		key = load_key(bio_err, keyfile, FORMAT_PEM, 0, NULL, NULL,
 			"signer private key");
 		if (!key)
 			goto end;
@@ -899,7 +899,7 @@ end:
 		SSL_CTX_free(ctx);
 		}

-	EXIT(ret);
+	OPENSSL_EXIT(ret);
 }

 static int add_ocsp_cert(OCSP_REQUEST **req, X509 *cert, X509 *issuer,
@@ -1120,7 +1120,10 @@ static char **lookup_serial(TXT_DB *db, ASN1_INTEGER *ser)
 	char *itmp, *row[DB_NUMBER],**rrow;
 	for (i = 0; i < DB_NUMBER; i++) row[i] = NULL;
 	bn = ASN1_INTEGER_to_BN(ser,NULL);
-	itmp = BN_bn2hex(bn);
+	if (BN_is_zero(bn))
+		itmp = BUF_strdup("00");
+	else
+		itmp = BN_bn2hex(bn);
 	row[DB_serial] = itmp;
 	BN_free(bn);
 	rrow=TXT_DB_get_by_index(db,DB_serial,row);
@@ -1176,7 +1179,7 @@ static int do_responder(OCSP_REQUEST **preq, BIO **pcbio, BIO *acbio, char *port

 	for(;;)
 		{
-		len = BIO_gets(cbio, inbuf, 1024);
+		len = BIO_gets(cbio, inbuf, sizeof inbuf);
 		if (len <= 0)
 			return 1;
 		/* Look for "POST" signalling start of query */
--- a/apps/openssl.c
+++ b/apps/openssl.c
@@ -139,11 +139,11 @@ static unsigned long MS_CALLBACK hash(const void *a_void);
 static int MS_CALLBACK cmp(const void *a_void,const void *b_void);
 static LHASH *prog_init(void );
 static int do_cmd(LHASH *prog,int argc,char *argv[]);
-CONF *config=NULL;
 char *default_config_file=NULL;

 /* Make sure there is only one when MONOLITH is defined */
 #ifdef MONOLITH
+CONF *config=NULL;
 BIO *bio_err=NULL;
 #endif

@@ -218,7 +218,8 @@ int main(int Argc, char *Argv[])
 #define PROG_NAME_SIZE	39
 	char pname[PROG_NAME_SIZE+1];
 	FUNCTION f,*fp;
-	MS_STATIC char *prompt,buf[1024],config_name[256];
+	MS_STATIC char *prompt,buf[1024];
+	char *to_free=NULL;
 	int n,i,ret=0;
 	int argc;
 	char **argv,*p;
@@ -228,6 +229,10 @@ int main(int Argc, char *Argv[])
 	arg.data=NULL;
 	arg.count=0;

+	if (bio_err == NULL)
+		if ((bio_err=BIO_new(BIO_s_file())) != NULL)
+			BIO_set_fp(bio_err,stderr,BIO_NOCLOSE|BIO_FP_TEXT);
+
 	if (getenv("OPENSSL_DEBUG_MEMORY") != NULL) /* if not defined, use compiled-in library defaults */
 		{
 		if (!(0 == strcmp(getenv("OPENSSL_DEBUG_MEMORY"), "off")))
@@ -252,23 +257,12 @@ int main(int Argc, char *Argv[])

 	apps_startup();

-	if (bio_err == NULL)
-		if ((bio_err=BIO_new(BIO_s_file())) != NULL)
-			BIO_set_fp(bio_err,stderr,BIO_NOCLOSE|BIO_FP_TEXT);
-
 	/* Lets load up our environment a little */
 	p=getenv("OPENSSL_CONF");
 	if (p == NULL)
 		p=getenv("SSLEAY_CONF");
 	if (p == NULL)
-		{
-		strcpy(config_name,X509_get_default_cert_area());
-#ifndef OPENSSL_SYS_VMS
-		strcat(config_name,"/");
-#endif
-		strcat(config_name,OPENSSL_CONF);
-		p=config_name;
-		}
+		p=to_free=make_config_name();

 	default_config_file=p;

@@ -284,7 +278,7 @@ int main(int Argc, char *Argv[])
 	prog=prog_init();

 	/* first check the program name */
-	program_name(Argv[0],pname,PROG_NAME_SIZE);
+	program_name(Argv[0],pname,sizeof pname);

 	f.name=pname;
 	fp=(FUNCTION *)lh_retrieve(prog,&f);
@@ -312,7 +306,7 @@ int main(int Argc, char *Argv[])
 		{
 		ret=0;
 		p=buf;
-		n=1024;
+		n=sizeof buf;
 		i=0;
 		for (;;)
 			{
@@ -346,6 +340,8 @@ int main(int Argc, char *Argv[])
 	BIO_printf(bio_err,"bad exit\n");
 	ret=1;
 end:
+	if (to_free)
+		OPENSSL_free(to_free);
 	if (config != NULL)
 		{
 		NCONF_free(config);
@@ -362,7 +358,7 @@ end:
 		BIO_free(bio_err);
 		bio_err=NULL;
 		}
-	EXIT(ret);
+	OPENSSL_EXIT(ret);
 	}

 #define LIST_STANDARD_COMMANDS "list-standard-commands"
--- a/apps/passwd.c
+++ b/apps/passwd.c
@@ -19,7 +19,6 @@
 # include <openssl/des.h>
 #endif
 #ifndef NO_MD5CRYPT_1
-# include <openssl/evp.h>
 # include <openssl/md5.h>
 #endif

@@ -293,7 +292,7 @@ err:
 	if (out)
 		BIO_free_all(out);
 	apps_shutdown();
-	EXIT(ret);
+	OPENSSL_EXIT(ret);
 	}


@@ -506,6 +505,6 @@ err:
 int MAIN(int argc, char **argv)
 	{
 	fputs("Program not available.\n", stderr)
-	EXIT(1);
+	OPENSSL_EXIT(1);
 	}
 #endif
--- a/apps/pkcs12.c
+++ b/apps/pkcs12.c
@@ -399,7 +399,7 @@ int MAIN(int argc, char **argv)
 #ifdef CRYPTO_MDEBUG
    CRYPTO_push_info("read MAC password");
 #endif
-	if(EVP_read_pw_string (macpass, 50, "Enter MAC Password:", export_cert))
+	if(EVP_read_pw_string (macpass, sizeof macpass, "Enter MAC Password:", export_cert))
 	{
    	    BIO_printf (bio_err, "Can't read Password\n");
    	    goto end;
@@ -427,7 +427,7 @@ int MAIN(int argc, char **argv)
 	CRYPTO_push_info("process -export_cert");
 	CRYPTO_push_info("reading private key");
 #endif
-	key = load_key(bio_err, keyname ? keyname : infile, FORMAT_PEM,
+	key = load_key(bio_err, keyname ? keyname : infile, FORMAT_PEM, 1,
 		passin, e, "private key");
 	if (!key) {
 		goto export_end;
@@ -508,9 +508,10 @@ int MAIN(int argc, char **argv)
 		    /* Exclude verified certificate */
 		    for (i = 1; i < sk_X509_num (chain2) ; i++) 
 			sk_X509_push(certs, sk_X509_value (chain2, i));
-		}
-		sk_X509_free(chain2);
-		if (vret) {
+		    /* Free first certificate */
+		    X509_free(sk_X509_value(chain2, 0));
+		    sk_X509_free(chain2);
+		} else {
 			BIO_printf (bio_err, "Error %s getting chain.\n",
 					X509_verify_cert_error_string(vret));
 			goto export_end;
@@ -537,8 +538,6 @@ int MAIN(int argc, char **argv)
 	}
 	sk_X509_pop_free(certs, X509_free);
 	certs = NULL;
-	/* ucert is part of certs so it is already freed */
-	ucert = NULL;

 #ifdef CRYPTO_MDEBUG
 	CRYPTO_pop_info();
@@ -546,7 +545,7 @@ int MAIN(int argc, char **argv)
 #endif

 	if(!noprompt &&
-		EVP_read_pw_string(pass, 50, "Enter Export Password:", 1)) {
+		EVP_read_pw_string(pass, sizeof pass, "Enter Export Password:", 1)) {
 	    BIO_printf (bio_err, "Can't read Password\n");
 	    goto export_end;
        }
@@ -627,7 +626,6 @@ int MAIN(int argc, char **argv)
 	if (certs) sk_X509_pop_free(certs, X509_free);
 	if (safes) sk_PKCS7_pop_free(safes, PKCS7_free);
 	if (bags) sk_PKCS12_SAFEBAG_pop_free(bags, PKCS12_SAFEBAG_free);
-	if (ucert) X509_free(ucert);

 #ifdef CRYPTO_MDEBUG
 	CRYPTO_pop_info();
@@ -644,7 +642,7 @@ int MAIN(int argc, char **argv)
 #ifdef CRYPTO_MDEBUG
    CRYPTO_push_info("read import password");
 #endif
-    if(!noprompt && EVP_read_pw_string(pass, 50, "Enter Import Password:", 0)) {
+    if(!noprompt && EVP_read_pw_string(pass, sizeof pass, "Enter Import Password:", 0)) {
 	BIO_printf (bio_err, "Can't read Password\n");
 	goto end;
    }
@@ -698,7 +696,7 @@ int MAIN(int argc, char **argv)
    if(passin) OPENSSL_free(passin);
    if(passout) OPENSSL_free(passout);
    apps_shutdown();
-    EXIT(ret);
+    OPENSSL_EXIT(ret);
 }

 int dump_certs_keys_p12 (BIO *out, PKCS12 *p12, char *pass,
--- a/apps/pkcs7.c
+++ b/apps/pkcs7.c
@@ -301,5 +301,5 @@ end:
 	if (in != NULL) BIO_free(in);
 	if (out != NULL) BIO_free_all(out);
 	apps_shutdown();
-	EXIT(ret);
+	OPENSSL_EXIT(ret);
 	}
--- a/apps/pkcs8.c
+++ b/apps/pkcs8.c
@@ -63,7 +63,6 @@
 #include <openssl/evp.h>
 #include <openssl/pkcs12.h>

-#include "apps.h"
 #define PROG pkcs8_main

 int MAIN(int, char **);
@@ -222,7 +221,8 @@ int MAIN(int argc, char **argv)
 	if (topk8)
 		{
 		BIO_free(in); /* Not needed in this section */
-		pkey = load_key(bio_err, infile, informat, passin, e, "key");
+		pkey = load_key(bio_err, infile, informat, 1,
+			passin, e, "key");
 		if (!pkey) {
 			return (1);
 		}
@@ -244,7 +244,8 @@ int MAIN(int argc, char **argv)
 			if(passout) p8pass = passout;
 			else {
 				p8pass = pass;
-				EVP_read_pw_string(pass, 50, "Enter Encryption Password:", 1);
+				if (EVP_read_pw_string(pass, sizeof pass, "Enter Encryption Password:", 1))
+					return (1);
 			}
 			app_RAND_load_file(NULL, bio_err, 0);
 			if (!(p8 = PKCS8_encrypt(pbe_nid, cipher,
@@ -301,7 +302,7 @@ int MAIN(int argc, char **argv)
 		if(passin) p8pass = passin;
 		else {
 			p8pass = pass;
-			EVP_read_pw_string(pass, 50, "Enter Password:", 0);
+			EVP_read_pw_string(pass, sizeof pass, "Enter Password:", 0);
 		}
 		p8inf = PKCS8_decrypt(p8, p8pass, strlen(p8pass));
 		X509_SIG_free(p8);
--- a/apps/rand.c
+++ b/apps/rand.c
@@ -213,5 +213,5 @@ err:
 	if (out)
 		BIO_free_all(out);
 	apps_shutdown();
-	EXIT(ret);
+	OPENSSL_EXIT(ret);
 	}
--- a/apps/req.c
+++ b/apps/req.c
@@ -73,6 +73,7 @@
 #include <openssl/x509v3.h>
 #include <openssl/objects.h>
 #include <openssl/pem.h>
+#include "../crypto/cryptlib.h"

 #define SECTION		"req"

@@ -134,7 +135,6 @@ static int req_check_len(int len,int n_min,int n_max);
 static int check_end(char *str, char *end);
 #ifndef MONOLITH
 static char *default_config_file=NULL;
-static CONF *config=NULL;
 #endif
 static CONF *req_conf=NULL;
 static int batch=0;
@@ -151,7 +151,7 @@ int MAIN(int argc, char **argv)
 #ifndef OPENSSL_NO_DSA
 	DSA *dsa_params=NULL;
 #endif
-	unsigned long nmflag = 0;
+	unsigned long nmflag = 0, reqflag = 0;
 	int ex=1,x509=0,days=30;
 	X509 *x509ss=NULL;
 	X509_REQ *req=NULL;
@@ -176,7 +176,7 @@ int MAIN(int argc, char **argv)
 	const EVP_MD *md_alg=NULL,*digest=EVP_md5();
 	unsigned long chtype = MBSTRING_ASC;
 #ifndef MONOLITH
-	MS_STATIC char config_name[256];
+	char *to_free;
 	long errline;
 #endif

@@ -356,6 +356,11 @@ int MAIN(int argc, char **argv)
 			if (--argc < 1) goto bad;
 			if (!set_name_ex(&nmflag, *(++argv))) goto bad;
 			}
+		else if (strcmp(*argv,"-reqopt") == 0)
+			{
+			if (--argc < 1) goto bad;
+			if (!set_cert_ex(&reqflag, *(++argv))) goto bad;
+			}
 		else if (strcmp(*argv,"-subject") == 0)
 			subject=1;
 		else if (strcmp(*argv,"-text") == 0)
@@ -448,7 +453,8 @@ bad:
 		BIO_printf(bio_err," -extensions .. specify certificate extension section (override value in config file)\n");
 		BIO_printf(bio_err," -reqexts ..    specify request extension section (override value in config file)\n");
 		BIO_printf(bio_err," -utf8          input characters are UTF8 (default ASCII)\n");
-		BIO_printf(bio_err," -nameopt arg    - various certificate name options\n");
+		BIO_printf(bio_err," -nameopt arg   - various certificate name options\n");
+		BIO_printf(bio_err," -reqopt arg    - various request text options\n\n");
 		goto end;
 		}

@@ -464,14 +470,7 @@ bad:
 	if (p == NULL)
 		p=getenv("SSLEAY_CONF");
 	if (p == NULL)
-		{
-		strcpy(config_name,X509_get_default_cert_area());
-#ifndef OPENSSL_SYS_VMS
-		strcat(config_name,"/");
-#endif
-		strcat(config_name,OPENSSL_CONF);
-		p=config_name;
-		}
+		p=to_free=make_config_name();
 	default_config_file=p;
 	config=NCONF_new(NULL);
 	i=NCONF_load(config, p, &errline);
@@ -479,7 +478,7 @@ bad:

 	if (template != NULL)
 		{
-		long errline;
+		long errline = -1;

 		if( verbose )
 			BIO_printf(bio_err,"Using configuration from %s\n",template);
@@ -622,7 +621,7 @@ bad:

 	if (keyfile != NULL)
 		{
-		pkey = load_key(bio_err, keyfile, keyform, passin, e,
+		pkey = load_key(bio_err, keyfile, keyform, 0, passin, e,
 			"Private Key");
 		if (!pkey)
 			{
@@ -981,9 +980,9 @@ loop:
 	if (text)
 		{
 		if (x509)
-			X509_print(out,x509ss);
+			X509_print_ex(out, x509ss, nmflag, reqflag);
 		else	
-			X509_REQ_print(out,req);
+			X509_REQ_print_ex(out, req, nmflag, reqflag);
 		}

 	if(subject) 
@@ -1053,6 +1052,10 @@ loop:
 		}
 	ex=0;
 end:
+#ifndef MONOLITH
+	if(to_free)
+		OPENSSL_free(to_free);
+#endif
 	if (ex)
 		{
 		ERR_print_errors(bio_err);
@@ -1071,7 +1074,7 @@ end:
 	if (dsa_params != NULL) DSA_free(dsa_params);
 #endif
 	apps_shutdown();
-	EXIT(ex);
+	OPENSSL_EXIT(ex);
 	}

 static int make_REQ(X509_REQ *req, EVP_PKEY *pkey, char *subj, int attribs,
@@ -1212,13 +1215,19 @@ start:		for (;;)
 				}
 			/* If OBJ not recognised ignore it */
 			if ((nid=OBJ_txt2nid(type)) == NID_undef) goto start;
+
+			if(strlen(v->name) > sizeof buf-9)
+			   {
+			   BIO_printf(bio_err,"Name '%s' too long\n",v->name);
+			   return 0;
+			   }
+
 			sprintf(buf,"%s_default",v->name);
 			if ((def=NCONF_get_string(req_conf,dn_sect,buf)) == NULL)
 				{
 				ERR_clear_error();
 				def="";
 				}
-				
 			sprintf(buf,"%s_value",v->name);
 			if ((value=NCONF_get_string(req_conf,dn_sect,buf)) == NULL)
 				{
@@ -1265,6 +1274,12 @@ start2:			for (;;)
 				if ((nid=OBJ_txt2nid(type)) == NID_undef)
 					goto start2;

+				if(strlen(v->name) > sizeof buf-9)
+				   {
+				   BIO_printf(bio_err,"Name '%s' too long\n",v->name);
+				   return 0;
+				   }
+
 				sprintf(buf,"%s_default",type);
 				if ((def=NCONF_get_string(req_conf,attr_sect,buf))
 					== NULL)
@@ -1368,6 +1383,7 @@ start:
 	(void)BIO_flush(bio_err);
 	if(value != NULL)
 		{
+		OPENSSL_assert(strlen(value) < sizeof buf-2);
 		strcpy(buf,value);
 		strcat(buf,"\n");
 		BIO_printf(bio_err,"%s\n",value);
@@ -1377,7 +1393,7 @@ start:
 		buf[0]='\0';
 		if (!batch)
 			{
-			fgets(buf,1024,stdin);
+			fgets(buf,sizeof buf,stdin);
 			}
 		else
 			{
@@ -1426,6 +1442,7 @@ start:
 	(void)BIO_flush(bio_err);
 	if (value != NULL)
 		{
+		OPENSSL_assert(strlen(value) < sizeof buf-2);
 		strcpy(buf,value);
 		strcat(buf,"\n");
 		BIO_printf(bio_err,"%s\n",value);
@@ -1435,7 +1452,7 @@ start:
 		buf[0]='\0';
 		if (!batch)
 			{
-			fgets(buf,1024,stdin);
+			fgets(buf,sizeof buf,stdin);
 			}
 		else
 			{
--- a/apps/rsa.c
+++ b/apps/rsa.c
@@ -238,12 +238,12 @@ bad:
 		if (pubin)
 			pkey = load_pubkey(bio_err, infile,
 				(informat == FORMAT_NETSCAPE && sgckey ?
-					FORMAT_IISSGC : informat),
+					FORMAT_IISSGC : informat), 1,
 				passin, e, "Public Key");
 		else
 			pkey = load_key(bio_err, infile,
 				(informat == FORMAT_NETSCAPE && sgckey ?
-					FORMAT_IISSGC : informat),
+					FORMAT_IISSGC : informat), 1,
 				passin, e, "Private Key");

 		if (pkey != NULL)
@@ -369,7 +369,7 @@ end:
 	if(passin) OPENSSL_free(passin);
 	if(passout) OPENSSL_free(passout);
 	apps_shutdown();
-	EXIT(ret);
+	OPENSSL_EXIT(ret);
 	}
 #else /* !OPENSSL_NO_RSA */

--- a/apps/rsautl.c
+++ b/apps/rsautl.c
@@ -169,12 +169,12 @@ int MAIN(int argc, char **argv)
 	
 	switch(key_type) {
 		case KEY_PRIVKEY:
-		pkey = load_key(bio_err, keyfile, keyform,
+		pkey = load_key(bio_err, keyfile, keyform, 0,
 			NULL, e, "Private Key");
 		break;

 		case KEY_PUBKEY:
-		pkey = load_pubkey(bio_err, keyfile, keyform,
+		pkey = load_pubkey(bio_err, keyfile, keyform, 0,
 			NULL, e, "Public Key");
 		break;

--- a/apps/s_cb.c
+++ b/apps/s_cb.c
@@ -134,7 +134,7 @@ int MS_CALLBACK verify_callback(int ok, X509_STORE_CTX *ctx)
 	err=	X509_STORE_CTX_get_error(ctx);
 	depth=	X509_STORE_CTX_get_error_depth(ctx);

-	X509_NAME_oneline(X509_get_subject_name(err_cert),buf,256);
+	X509_NAME_oneline(X509_get_subject_name(err_cert),buf,sizeof buf);
 	BIO_printf(bio_err,"depth=%d %s\n",depth,buf);
 	if (!ok)
 		{
@@ -154,7 +154,7 @@ int MS_CALLBACK verify_callback(int ok, X509_STORE_CTX *ctx)
 	switch (ctx->error)
 		{
 	case X509_V_ERR_UNABLE_TO_GET_ISSUER_CERT:
-		X509_NAME_oneline(X509_get_issuer_name(ctx->current_cert),buf,256);
+		X509_NAME_oneline(X509_get_issuer_name(ctx->current_cert),buf,sizeof buf);
 		BIO_printf(bio_err,"issuer= %s\n",buf);
 		break;
 	case X509_V_ERR_CERT_NOT_YET_VALID:
--- a/apps/s_client.c
+++ b/apps/s_client.c
@@ -140,6 +140,14 @@ typedef unsigned int u_int;
 #include <conio.h>
 #endif

+#ifdef OPENSSL_SYS_WINCE
+/* Windows CE incorrectly defines fileno as returning void*, so to avoid problems below... */
+#ifdef fileno
+#undef fileno
+#endif
+#define fileno(a) (int)_fileno(a)
+#endif
+

 #if (defined(OPENSSL_SYS_VMS) && __VMS_VER < 70000000)
 /* FIONBIO used as a switch to enable ioctl, and that isn't in VMS < 7.0 */
@@ -662,7 +670,11 @@ re_start:
 					tv.tv_usec = 0;
 					i=select(width,(void *)&readfds,(void *)&writefds,
 						 NULL,&tv);
+#ifdef OPENSSL_SYS_WINCE
+					if(!i && (!_kbhit() || !read_tty) ) continue;
+#else
 					if(!i && (!((_kbhit()) || (WAIT_OBJECT_0 == WaitForSingleObject(GetStdHandle(STD_INPUT_HANDLE), 0))) || !read_tty) ) continue;
+#endif
 				} else 	i=select(width,(void *)&readfds,(void *)&writefds,
 					 NULL,NULL);
 			}
@@ -746,8 +758,8 @@ re_start:
 				goto shut;
 				}
 			}
-#ifdef OPENSSL_SYS_WINDOWS
-		/* Assume Windows can always write */
+#if defined(OPENSSL_SYS_WINDOWS) || defined(OPENSSL_SYS_MSDOS)
+		/* Assume Windows/DOS can always write */
 		else if (!ssl_pending && write_tty)
 #else
 		else if (!ssl_pending && FD_ISSET(fileno(stdout),&writefds))
@@ -828,7 +840,11 @@ printf("read=%d pending=%d peek=%d\n",k,SSL_pending(con),SSL_peek(con,zbuf,10240
 			}

 #ifdef OPENSSL_SYS_WINDOWS
+#ifdef OPENSSL_SYS_WINCE
+		else if (_kbhit())
+#else
 		else if ((_kbhit()) || (WAIT_OBJECT_0 == WaitForSingleObject(GetStdHandle(STD_INPUT_HANDLE), 0)))
+#endif
 #else
 		else if (FD_ISSET(fileno(stdin),&readfds))
 #endif
@@ -892,16 +908,16 @@ end:
 	if (con != NULL) SSL_free(con);
 	if (con2 != NULL) SSL_free(con2);
 	if (ctx != NULL) SSL_CTX_free(ctx);
-	if (cbuf != NULL) { memset(cbuf,0,BUFSIZZ); OPENSSL_free(cbuf); }
-	if (sbuf != NULL) { memset(sbuf,0,BUFSIZZ); OPENSSL_free(sbuf); }
-	if (mbuf != NULL) { memset(mbuf,0,BUFSIZZ); OPENSSL_free(mbuf); }
+	if (cbuf != NULL) { OPENSSL_cleanse(cbuf,BUFSIZZ); OPENSSL_free(cbuf); }
+	if (sbuf != NULL) { OPENSSL_cleanse(sbuf,BUFSIZZ); OPENSSL_free(sbuf); }
+	if (mbuf != NULL) { OPENSSL_cleanse(mbuf,BUFSIZZ); OPENSSL_free(mbuf); }
 	if (bio_c_out != NULL)
 		{
 		BIO_free(bio_c_out);
 		bio_c_out=NULL;
 		}
 	apps_shutdown();
-	EXIT(ret);
+	OPENSSL_EXIT(ret);
 	}


@@ -930,10 +946,10 @@ static void print_stuff(BIO *bio, SSL *s, int full)
 			for (i=0; i<sk_X509_num(sk); i++)
 				{
 				X509_NAME_oneline(X509_get_subject_name(
-					sk_X509_value(sk,i)),buf,BUFSIZ);
+					sk_X509_value(sk,i)),buf,sizeof buf);
 				BIO_printf(bio,"%2d s:%s\n",i,buf);
 				X509_NAME_oneline(X509_get_issuer_name(
-					sk_X509_value(sk,i)),buf,BUFSIZ);
+					sk_X509_value(sk,i)),buf,sizeof buf);
 				BIO_printf(bio,"   i:%s\n",buf);
 				if (c_showcerts)
 					PEM_write_bio_X509(bio,sk_X509_value(sk,i));
@@ -948,10 +964,10 @@ static void print_stuff(BIO *bio, SSL *s, int full)
 			if (!(c_showcerts && got_a_chain)) /* Redundant if we showed the whole chain */
 				PEM_write_bio_X509(bio,peer);
 			X509_NAME_oneline(X509_get_subject_name(peer),
-				buf,BUFSIZ);
+				buf,sizeof buf);
 			BIO_printf(bio,"subject=%s\n",buf);
 			X509_NAME_oneline(X509_get_issuer_name(peer),
-				buf,BUFSIZ);
+				buf,sizeof buf);
 			BIO_printf(bio,"issuer=%s\n",buf);
 			}
 		else
@@ -973,7 +989,7 @@ static void print_stuff(BIO *bio, SSL *s, int full)
 			{
 			BIO_printf(bio,"---\nNo client certificate CA names sent\n");
 			}
-		p=SSL_get_shared_ciphers(s,buf,BUFSIZ);
+		p=SSL_get_shared_ciphers(s,buf,sizeof buf);
 		if (p != NULL)
 			{
 			/* This works only for SSL 2.  In later protocol
--- a/apps/s_server.c
+++ b/apps/s_server.c
@@ -144,6 +144,14 @@ typedef unsigned int u_int;
 #include <conio.h>
 #endif

+#ifdef OPENSSL_SYS_WINCE
+/* Windows CE incorrectly defines fileno as returning void*, so to avoid problems below... */
+#ifdef fileno
+#undef fileno
+#endif
+#define fileno(a) (int)_fileno(a)
+#endif
+
 #if (defined(OPENSSL_SYS_VMS) && __VMS_VER < 70000000)
 /* FIONBIO used as a switch to enable ioctl, and that isn't in VMS < 7.0 */
 #undef FIONBIO
@@ -320,10 +328,10 @@ static char **local_argv;
 static int ebcdic_new(BIO *bi);
 static int ebcdic_free(BIO *a);
 static int ebcdic_read(BIO *b, char *out, int outl);
-static int ebcdic_write(BIO *b, char *in, int inl);
-static long ebcdic_ctrl(BIO *b, int cmd, long num, char *ptr);
+static int ebcdic_write(BIO *b, const char *in, int inl);
+static long ebcdic_ctrl(BIO *b, int cmd, long num, void *ptr);
 static int ebcdic_gets(BIO *bp, char *buf, int size);
-static int ebcdic_puts(BIO *bp, char *str);
+static int ebcdic_puts(BIO *bp, const char *str);

 #define BIO_TYPE_EBCDIC_FILTER	(18|0x0200)
 static BIO_METHOD methods_ebcdic=
@@ -388,7 +396,7 @@ static int ebcdic_read(BIO *b, char *out, int outl)
 	return(ret);
 }

-static int ebcdic_write(BIO *b, char *in, int inl)
+static int ebcdic_write(BIO *b, const char *in, int inl)
 {
 	EBCDIC_OUTBUFF *wbuf;
 	int ret=0;
@@ -421,7 +429,7 @@ static int ebcdic_write(BIO *b, char *in, int inl)
 	return(ret);
 }

-static long ebcdic_ctrl(BIO *b, int cmd, long num, char *ptr)
+static long ebcdic_ctrl(BIO *b, int cmd, long num, void *ptr)
 {
 	long ret;

@@ -440,7 +448,7 @@ static long ebcdic_ctrl(BIO *b, int cmd, long num, char *ptr)

 static int ebcdic_gets(BIO *bp, char *buf, int size)
 {
-	int i, ret;
+	int i, ret=0;
 	if (bp->next_bio == NULL) return(0);
 /*	return(BIO_gets(bp->next_bio,buf,size));*/
 	for (i=0; i<size-1; ++i)
@@ -459,7 +467,7 @@ static int ebcdic_gets(BIO *bp, char *buf, int size)
 	return (ret < 0 && i == 0) ? ret : i;
 }

-static int ebcdic_puts(BIO *bp, char *str)
+static int ebcdic_puts(BIO *bp, const char *str)
 {
 	if (bp->next_bio == NULL) return(0);
 	return ebcdic_write(bp, str, strlen(str));
@@ -860,7 +868,7 @@ end:
 		bio_s_out=NULL;
 		}
 	apps_shutdown();
-	EXIT(ret);
+	OPENSSL_EXIT(ret);
 	}

 static void print_stats(BIO *bio, SSL_CTX *ssl_ctx)
@@ -1176,7 +1184,7 @@ err:
 	BIO_printf(bio_s_out,"CONNECTION CLOSED\n");
 	if (buf != NULL)
 		{
-		memset(buf,0,bufsize);
+		OPENSSL_cleanse(buf,bufsize);
 		OPENSSL_free(buf);
 		}
 	if (ret >= 0)
@@ -1228,14 +1236,14 @@ static int init_ssl_connection(SSL *con)
 		{
 		BIO_printf(bio_s_out,"Client certificate\n");
 		PEM_write_bio_X509(bio_s_out,peer);
-		X509_NAME_oneline(X509_get_subject_name(peer),buf,BUFSIZ);
+		X509_NAME_oneline(X509_get_subject_name(peer),buf,sizeof buf);
 		BIO_printf(bio_s_out,"subject=%s\n",buf);
-		X509_NAME_oneline(X509_get_issuer_name(peer),buf,BUFSIZ);
+		X509_NAME_oneline(X509_get_issuer_name(peer),buf,sizeof buf);
 		BIO_printf(bio_s_out,"issuer=%s\n",buf);
 		X509_free(peer);
 		}

-	if (SSL_get_shared_ciphers(con,buf,BUFSIZ) != NULL)
+	if (SSL_get_shared_ciphers(con,buf,sizeof buf) != NULL)
 		BIO_printf(bio_s_out,"Shared ciphers:%s\n",buf);
 	str=SSL_CIPHER_get_name(SSL_get_current_cipher(con));
 	BIO_printf(bio_s_out,"CIPHER is %s\n",(str != NULL)?str:"(NONE)");
@@ -1395,7 +1403,7 @@ static int www_body(char *hostname, int s, unsigned char *context)
 			else
 				{
 				BIO_printf(bio_s_out,"read R BLOCK\n");
-#ifndef OPENSSL_SYS_MSDOS
+#if !defined(OPENSSL_SYS_MSDOS) && !defined(__DJGPP__)
 				sleep(1);
 #endif
 				continue;
--- a/apps/s_socket.c
+++ b/apps/s_socket.c
@@ -83,9 +83,9 @@ typedef unsigned int u_int;

 static struct hostent *GetHostByName(char *name);
 #ifdef OPENSSL_SYS_WINDOWS
-static void sock_cleanup(void);
+static void ssl_sock_cleanup(void);
 #endif
-static int sock_init(void);
+static int ssl_sock_init(void);
 static int init_client_ip(int *sock,unsigned char ip[4], int port);
 static int init_server(int *sock, int port);
 static int init_server_long(int *sock, int port,char *ip);
@@ -118,7 +118,7 @@ static LONG FAR PASCAL topHookProc(HWND hwnd, UINT message, WPARAM wParam,
 		case WM_DESTROY:
 		case WM_CLOSE:
 			SetWindowLong(topWnd,GWL_WNDPROC,(LONG)lpTopWndProc);
-			sock_cleanup();
+			ssl_sock_cleanup();
 			break;
 			}
 		}
@@ -135,26 +135,34 @@ static BOOL CALLBACK enumproc(HWND hwnd,LPARAM lParam)
 #endif /* OPENSSL_SYS_WINDOWS */

 #ifdef OPENSSL_SYS_WINDOWS
-static void sock_cleanup(void)
+static void ssl_sock_cleanup(void)
 	{
 	if (wsa_init_done)
 		{
 		wsa_init_done=0;
+#ifndef OPENSSL_SYS_WINCE
 		WSACancelBlockingCall();
+#endif
 		WSACleanup();
 		}
 	}
 #endif

-static int sock_init(void)
+static int ssl_sock_init(void)
 	{
-#ifdef OPENSSL_SYS_WINDOWS
+#ifdef WATT32
+	extern int _watt_do_exit;
+	_watt_do_exit = 0;
+	dbug_init();
+	if (sock_init())
+		return (0);
+#elif defined(OPENSSL_SYS_WINDOWS)
 	if (!wsa_init_done)
 		{
 		int err;
 	  
 #ifdef SIGINT
-		signal(SIGINT,(void (*)(int))sock_cleanup);
+		signal(SIGINT,(void (*)(int))ssl_sock_cleanup);
 #endif
 		wsa_init_done=1;
 		memset(&wsa_state,0,sizeof(wsa_state));
@@ -196,7 +204,7 @@ static int init_client_ip(int *sock, unsigned char ip[4], int port)
 	struct sockaddr_in them;
 	int s,i;

-	if (!sock_init()) return(0);
+	if (!ssl_sock_init()) return(0);

 	memset((char *)&them,0,sizeof(them));
 	them.sin_family=AF_INET;
@@ -261,7 +269,7 @@ static int init_server_long(int *sock, int port, char *ip)
 	struct sockaddr_in server;
 	int s= -1,i;

-	if (!sock_init()) return(0);
+	if (!ssl_sock_init()) return(0);

 	memset((char *)&server,0,sizeof(server));
 	server.sin_family=AF_INET;
@@ -318,7 +326,7 @@ static int do_accept(int acc_sock, int *sock, char **host)
 	int len;
 /*	struct linger ling; */

-	if (!sock_init()) return(0);
+	if (!ssl_sock_init()) return(0);

 #ifndef OPENSSL_SYS_WINDOWS
 redoit:
@@ -448,7 +456,7 @@ static int host_ip(char *str, unsigned char ip[4])
 		{ /* do a gethostbyname */
 		struct hostent *he;

-		if (!sock_init()) return(0);
+		if (!ssl_sock_init()) return(0);

 		he=GetHostByName(str);
 		if (he == NULL)
@@ -529,9 +537,12 @@ static struct hostent *GetHostByName(char *name)
 		ret=gethostbyname(name);
 		if (ret == NULL) return(NULL);
 		/* else add to cache */
-		strncpy(ghbn_cache[lowi].name,name,128);
-		memcpy((char *)&(ghbn_cache[lowi].ent),ret,sizeof(struct hostent));
-		ghbn_cache[lowi].order=ghbn_miss+ghbn_hits;
+		if(strlen(name) < sizeof ghbn_cache[0].name)
+			{
+			strcpy(ghbn_cache[lowi].name,name);
+			memcpy((char *)&(ghbn_cache[lowi].ent),ret,sizeof(struct hostent));
+			ghbn_cache[lowi].order=ghbn_miss+ghbn_hits;
+			}
 		return(ret);
 		}
 	else
--- a/apps/s_time.c
+++ b/apps/s_time.c
@@ -146,6 +146,8 @@
 #undef BUFSIZZ
 #define BUFSIZZ 1024*10

+#define MYBUFSIZ 1024*8
+
 #undef min
 #undef max
 #define min(a,b) (((a) < (b)) ? (a) : (b))
@@ -320,6 +322,11 @@ static int parseArgs(int argc, char **argv)
 		{
 		if (--argc < 1) goto bad;
 		s_www_path= *(++argv);
+		if(strlen(s_www_path) > MYBUFSIZ-100)
+			{
+			BIO_printf(bio_err,"-www option too long\n");
+			badop=1;
+			}
 		}
 	else if(strcmp(*argv,"-bugs") == 0)
 	    st_bugs=1;
@@ -480,7 +487,7 @@ int MAIN(int argc, char **argv)
 	tm_Time_F(START);
 	for (;;)
 		{
-		if (finishtime < time(NULL)) break;
+		if (finishtime < (long)time(NULL)) break;
 #ifdef WIN32_STUFF

 		if( flushWinMsgs(0) == -1 )
@@ -531,9 +538,9 @@ int MAIN(int argc, char **argv)
 		}
 	totalTime += tm_Time_F(STOP); /* Add the time for this iteration */

-	i=(int)(time(NULL)-finishtime+maxTime);
+	i=(int)((long)time(NULL)-finishtime+maxTime);
 	printf( "\n\n%d connections in %.2fs; %.2f connections/user sec, bytes read %ld\n", nConn, totalTime, ((double)nConn/totalTime),bytes_read);
-	printf( "%d connections in %ld real seconds, %ld bytes read per connection\n",nConn,time(NULL)-finishtime+maxTime,bytes_read/nConn);
+	printf( "%d connections in %ld real seconds, %ld bytes read per connection\n",nConn,(long)time(NULL)-finishtime+maxTime,bytes_read/nConn);

 	/* Now loop and time connections using the same session id over and over */

@@ -565,7 +572,7 @@ next:
 	nConn = 0;
 	totalTime = 0.0;

-	finishtime=time(NULL)+maxTime;
+	finishtime=(long)time(NULL)+maxTime;

 	printf( "starting\n" );
 	bytes_read=0;
@@ -573,7 +580,7 @@ next:
 		
 	for (;;)
 		{
-		if (finishtime < time(NULL)) break;
+		if (finishtime < (long)time(NULL)) break;

 #ifdef WIN32_STUFF
 		if( flushWinMsgs(0) == -1 )
@@ -623,7 +630,7 @@ next:


 	printf( "\n\n%d connections in %.2fs; %.2f connections/user sec, bytes read %ld\n", nConn, totalTime, ((double)nConn/totalTime),bytes_read);
-	printf( "%d connections in %ld real seconds, %ld bytes read per connection\n",nConn,time(NULL)-finishtime+maxTime,bytes_read/nConn);
+	printf( "%d connections in %ld real seconds, %ld bytes read per connection\n",nConn,(long)time(NULL)-finishtime+maxTime,bytes_read/nConn);

 	ret=0;
 end:
@@ -635,7 +642,7 @@ end:
 		tm_ctx=NULL;
 		}
 	apps_shutdown();
-	EXIT(ret);
+	OPENSSL_EXIT(ret);
 	}

 /***********************************************************************
--- a/apps/sess_id.c
+++ b/apps/sess_id.c
@@ -273,7 +273,7 @@ end:
 	if (out != NULL) BIO_free_all(out);
 	if (x != NULL) SSL_SESSION_free(x);
 	apps_shutdown();
-	EXIT(ret);
+	OPENSSL_EXIT(ret);
 	}

 static SSL_SESSION *load_sess_id(char *infile, int format)
--- a/apps/smime.c
+++ b/apps/smime.c
@@ -428,7 +428,7 @@ int MAIN(int argc, char **argv)
 	} else keyfile = NULL;

 	if(keyfile) {
-		key = load_key(bio_err, keyfile, keyform, passin, e,
+		key = load_key(bio_err, keyfile, keyform, 0, passin, e,
 			       "signing key file");
 		if (!key) {
 			goto end;
--- a/apps/speed.c
+++ b/apps/speed.c
@@ -187,7 +187,8 @@

 /* The following if from times(3) man page.  It may need to be changed */
 #ifndef HZ
-# ifdef _SC_CLK_TCK
+# if defined(_SC_CLK_TCK) \
+     && (!defined(OPENSSL_SYS_VMS) || __CTRL_VER >= 70000000)
 #  define HZ ((double)sysconf(_SC_CLK_TCK))
 # else
 #  ifndef CLK_TCK
@@ -861,7 +862,7 @@ int MAIN(int argc, char **argv)

 			BIO_printf(bio_err,"\n");
 			BIO_printf(bio_err,"Available options:\n");
-#ifdef TIMES
+#if defined(TIMES) || defined(USE_TOD)
 			BIO_printf(bio_err,"-elapsed        measure time in real time instead of CPU user time.\n");
 #endif
 			BIO_printf(bio_err,"-engine e       use engine e, possibly a hardware device.\n");
@@ -1728,7 +1729,7 @@ end:
 			DSA_free(dsa_key[i]);
 #endif
 	apps_shutdown();
-	EXIT(mret);
+	OPENSSL_EXIT(mret);
 	}

 static void print_message(const char *s, long num, int length)
@@ -1781,7 +1782,7 @@ static char *sstrsep(char **string, const char *delim)
    if (**string == 0)
        return NULL;

-    memset(isdelim, 0, 256);
+    memset(isdelim, 0, sizeof isdelim);
    isdelim[0] = 1;

    while (*delim)
--- a/apps/spkac.c
+++ b/apps/spkac.c
@@ -186,7 +186,7 @@ bad:
 	if(keyfile) {
 		pkey = load_key(bio_err,
 				strcmp(keyfile, "-") ? keyfile : NULL,
-				FORMAT_PEM, passin, e, "private key");
+				FORMAT_PEM, 1, passin, e, "private key");
 		if(!pkey) {
 			goto end;
 		}
@@ -295,5 +295,5 @@ end:
 	EVP_PKEY_free(pkey);
 	if(passin) OPENSSL_free(passin);
 	apps_shutdown();
-	EXIT(ret);
+	OPENSSL_EXIT(ret);
 	}
--- a/apps/verify.c
+++ b/apps/verify.c
@@ -232,7 +232,7 @@ end:
 	sk_X509_pop_free(untrusted, X509_free);
 	sk_X509_pop_free(trusted, X509_free);
 	apps_shutdown();
-	EXIT(ret);
+	OPENSSL_EXIT(ret);
 	}

 static int check(X509_STORE *ctx, char *file, STACK_OF(X509) *uchain, STACK_OF(X509) *tchain, int purpose, ENGINE *e)
@@ -330,7 +330,8 @@ static int MS_CALLBACK cb(int ok, X509_STORE_CTX *ctx)
 	if (!ok)
 		{
 		X509_NAME_oneline(
-				X509_get_subject_name(ctx->current_cert),buf,256);
+				X509_get_subject_name(ctx->current_cert),buf,
+				sizeof buf);
 		printf("%s\n",buf);
 		printf("error %d at %d depth lookup:%s\n",ctx->error,
 			ctx->error_depth,
--- a/apps/version.c
+++ b/apps/version.c
@@ -200,5 +200,5 @@ int MAIN(int argc, char **argv)
 	if (dir)  printf("%s\n",SSLeay_version(SSLEAY_DIR));
 end:
 	apps_shutdown();
-	EXIT(ret);
+	OPENSSL_EXIT(ret);
 	}
--- a/apps/winrand.c
+++ b/apps/winrand.c
@@ -118,7 +118,6 @@ LRESULT CALLBACK WndProc(HWND hwnd, UINT iMsg, WPARAM wParam, LPARAM lParam)
        HDC hdc;
 	PAINTSTRUCT ps;
        RECT rect;
-        char buffer[200];
        static int seeded = 0;

 	switch (iMsg)
--- a/apps/x509.c
+++ b/apps/x509.c
@@ -122,7 +122,7 @@ static char *x509_usage[]={
 " -CAkey arg      - set the CA key, must be PEM format\n",
 "                   missing, it is assumed to be in the CA file.\n",
 " -CAcreateserial - create serial number file if it does not exist\n",
-" -CAserial       - serial file\n",
+" -CAserial arg   - serial file\n",
 " -set_serial     - serial number to use\n",
 " -text           - print the certificate in text form\n",
 " -C              - print out C code forms\n",
@@ -479,7 +479,7 @@ bad:

 	if (extfile)
 		{
-		long errorline;
+		long errorline = -1;
 		X509V3_CTX ctx2;
 		extconf = NCONF_new(NULL);
 		if (!NCONF_load(extconf, extfile,&errorline))
@@ -770,10 +770,11 @@ bad:
 				int y,z;

 				X509_NAME_oneline(X509_get_subject_name(x),
-					buf,256);
+					buf,sizeof buf);
 				BIO_printf(STDout,"/* subject:%s */\n",buf);
 				m=X509_NAME_oneline(
-					X509_get_issuer_name(x),buf,256);
+					X509_get_issuer_name(x),buf,
+					sizeof buf);
 				BIO_printf(STDout,"/* issuer :%s */\n",buf);

 				z=i2d_X509(x,NULL);
@@ -861,8 +862,8 @@ bad:
 				if (Upkey == NULL)
 					{
 					Upkey=load_key(bio_err,
-						keyfile,keyformat, passin, e,
-						"Private key");
+						keyfile, keyformat, 0,
+						passin, e, "Private key");
 					if (Upkey == NULL) goto end;
 					}
 #ifndef OPENSSL_NO_DSA
@@ -880,8 +881,9 @@ bad:
 				if (CAkeyfile != NULL)
 					{
 					CApkey=load_key(bio_err,
-						CAkeyfile,CAkeyformat, passin,
-						e, "CA Private Key");
+						CAkeyfile, CAkeyformat,
+						0, passin, e,
+						"CA Private Key");
 					if (CApkey == NULL) goto end;
 					}
 #ifndef OPENSSL_NO_DSA
@@ -908,8 +910,8 @@ bad:
 				else
 					{
 					pk=load_key(bio_err,
-						keyfile,FORMAT_PEM, passin, e,
-						"request key");
+						keyfile, FORMAT_PEM, 0,
+						passin, e, "request key");
 					if (pk == NULL) goto end;
 					}

@@ -1015,7 +1017,7 @@ end:
 	sk_ASN1_OBJECT_pop_free(reject, ASN1_OBJECT_free);
 	if (passin) OPENSSL_free(passin);
 	apps_shutdown();
-	EXIT(ret);
+	OPENSSL_EXIT(ret);
 	}

 static ASN1_INTEGER *load_serial(char *CAfile, char *serialfile, int create)
@@ -1073,7 +1075,7 @@ static ASN1_INTEGER *load_serial(char *CAfile, char *serialfile, int create)
 		}
 	else 
 		{
-		if (!a2i_ASN1_INTEGER(io,bs,buf2,1024))
+		if (!a2i_ASN1_INTEGER(io,bs,buf2,sizeof buf2))
 			{
 			BIO_printf(bio_err,"unable to load serial number from %s\n",buf);
 			ERR_print_errors(bio_err);
--- a/24
+++ b/24
@@ -351,6 +351,10 @@ case "${SYSTEM}:${RELEASE}:${VERSION}:${MACHINE}" in
    *CRAY*)
       echo "j90-cray-unicos"; exit 0;
       ;;
+
+    NONSTOP_KERNEL*)
+       echo "nsr-tandem-nsk"; exit 0;
+       ;;
 esac

 #
@@ -393,6 +397,9 @@ exit 0
 GCCVER=`(gcc -dumpversion) 2>/dev/null`
 if [ "$GCCVER" != "" ]; then
  CC=gcc
+  # then strip off whatever prefix egcs prepends the number with...
+  # Hopefully, this will work for any future prefixes as well.
+  GCCVER=`echo $GCCVER | sed 's/^[a-zA-Z]*\-//'`
  # Since gcc 3.1 gcc --version behaviour has changed.  gcc -dumpversion
  # does give us what we want though, so we use that.  We just just the
  # major and minor version numbers.
@@ -540,12 +547,13 @@ EOF
  ppc-apple-darwin*) OUT="darwin-ppc-cc" ;;
  i386-apple-darwin*) OUT="darwin-i386-cc" ;;
  sparc64-*-linux2)
-	#Before we can uncomment following lines we have to wait at least
-	#till 64-bit glibc for SPARC is operational:-(
-	#echo "WARNING! If you wish to build 64-bit library, then you have to"
-	#echo "         invoke './Configure linux64-sparcv9' *manually*."
-	#echo "         Type return if you want to continue, Ctrl-C to abort."
-	#read waste < /dev/tty
+	echo "WARNING! If *know* that your GNU C supports 64-bit/V9 ABI"
+	echo "         and wish to build 64-bit library, then you have to"
+	echo "         invoke './Configure linux64-sparcv9' *manually*."
+	if [ "$TEST" = "false" ]; then
+	  echo "          You have about 5 seconds to press Ctrl-C to abort."
+	  (stty -icanon min 0 time 50; read waste) < /dev/tty
+	fi
 	OUT="linux-sparcv9" ;;
  sparc-*-linux2)
 	KARCH=`awk '/^type/{print$3}' /proc/cpuinfo`
@@ -578,6 +586,7 @@ EOF
  arm*-*-linux2) OUT="linux-elf-arm" ;;
  s390-*-linux2) OUT="linux-s390" ;;
  s390x-*-linux?) OUT="linux-s390x" ;;
+  x86_64-*-linux?) OUT="linux-x86_64" ;;
  *-*-linux2) OUT="linux-elf"
 	if [ "$GCCVER" -gt 28 ]; then
          if grep '^model.*Pentium' /proc/cpuinfo >/dev/null ; then
@@ -722,6 +731,7 @@ EOF
  *-*-cygwin) OUT="Cygwin" ;;
  t3e-cray-unicosmk) OUT="cray-t3e" ;;
  j90-cray-unicos) OUT="cray-j90" ;;
+  nsr-tandem-nsk) OUT="tandem-c89" ;;
  *) OUT=`echo $GUESSOS | awk -F- '{print $3}'`;;
 esac

@@ -756,7 +766,7 @@ case "$GUESSOS" in
  i386-*) options="$options 386" ;;
 esac

-for i in bf cast des dh dsa ec hmac idea md2 md5 mdc2 rc2 rc4 rc5 rijndael ripemd rsa sha
+for i in bf cast des dh dsa ec hmac idea md2 md5 mdc2 rc2 rc4 rc5 aes ripemd rsa sha
 do
  if [ ! -d crypto/$i ]
  then
--- a/crypto/Makefile.ssl
+++ b/crypto/Makefile.ssl
@@ -36,8 +36,8 @@ GENERAL=Makefile README crypto-lib.com install.com

 LIB= $(TOP)/libcrypto.a
 SHARED_LIB= libcrypto$(SHLIB_EXT)
-LIBSRC=	cryptlib.c mem.c mem_dbg.c cversion.c ex_data.c tmdiff.c cpt_err.c ebcdic.c uid.c o_time.c
-LIBOBJ= cryptlib.o mem.o mem_dbg.o cversion.o ex_data.o tmdiff.o cpt_err.o ebcdic.o uid.o o_time.o
+LIBSRC=	cryptlib.c mem.c mem_clr.c mem_dbg.c cversion.c ex_data.c tmdiff.c cpt_err.c ebcdic.c uid.c o_time.c
+LIBOBJ= cryptlib.o mem.o mem_clr.o mem_dbg.o cversion.o ex_data.o tmdiff.o cpt_err.o ebcdic.o uid.o o_time.o

 SRC= $(LIBSRC)

@@ -98,7 +98,7 @@ lib:	$(LIBOBJ)

 shared:
 	if [ -n "$(SHARED_LIBS)" ]; then \
-		(cd ..; make $(SHARED_LIB)); \
+		(cd ..; $(MAKE) $(SHARED_LIB)); \
 	fi

 libs:
@@ -136,12 +136,12 @@ lint:

 depend:
 	if [ ! -f buildinf.h ]; then touch buildinf.h; fi # fake buildinf.h if it does not exist
-	$(MAKEDEPEND) $(CFLAG) $(INCLUDE) $(DEPFLAG) $(PROGS) $(LIBSRC)
+	$(MAKEDEPEND) -- $(CFLAG) $(INCLUDE) $(DEPFLAG) -- $(PROGS) $(LIBSRC)
 	if [ ! -s buildinf.h ]; then rm buildinf.h; fi
 	@for i in $(SDIRS) ;\
 	do \
 	(cd $$i && echo "making depend in crypto/$$i..." && \
-	$(MAKE) MAKEFILE='${MAKEFILE}' INCLUDES='${INCLUDES}' CFLAG='${CFLAG}' DEPFLAG='${DEPFLAG}' PERL='${PERL}' depend ); \
+	$(MAKE) MAKEFILE='${MAKEFILE}' INCLUDES='${INCLUDES}' CFLAG='${CFLAG}' DEPFLAG='${DEPFLAG}' MAKEDEPPROG='${MAKEDEPPROG}' KRB5_INCLUDES='${KRB5_INCLUDES}' PERL='${PERL}' depend ); \
 	done;

 clean:
@@ -193,6 +193,10 @@ mem.o: ../include/openssl/err.h ../include/openssl/lhash.h
 mem.o: ../include/openssl/opensslconf.h ../include/openssl/opensslv.h
 mem.o: ../include/openssl/safestack.h ../include/openssl/stack.h
 mem.o: ../include/openssl/symhacks.h cryptlib.h mem.c
+mem_clr.o: ../include/openssl/crypto.h ../include/openssl/e_os2.h
+mem_clr.o: ../include/openssl/opensslconf.h ../include/openssl/opensslv.h
+mem_clr.o: ../include/openssl/safestack.h ../include/openssl/stack.h
+mem_clr.o: ../include/openssl/symhacks.h mem_clr.c
 mem_dbg.o: ../e_os.h ../include/openssl/bio.h ../include/openssl/buffer.h
 mem_dbg.o: ../include/openssl/crypto.h ../include/openssl/e_os2.h
 mem_dbg.o: ../include/openssl/err.h ../include/openssl/lhash.h
--- a/crypto/aes/Makefile.ssl
+++ b/crypto/aes/Makefile.ssl
@@ -75,7 +75,7 @@ lint:
 	lint -DLINT $(INCLUDES) $(SRC)>fluff

 depend:
-	$(MAKEDEPEND) $(CFLAG) $(INCLUDES) $(DEPFLAG) $(PROGS) $(LIBSRC)
+	$(MAKEDEPEND) -- $(CFLAG) $(INCLUDES) $(DEPFLAG) -- $(PROGS) $(LIBSRC)

 dclean:
 	$(PERL) -pe 'if (/^# DO NOT DELETE THIS LINE/) {print; exit(0);}' $(MAKEFILE) >Makefile.new
--- a/crypto/aes/aes.h
+++ b/crypto/aes/aes.h
@@ -56,8 +56,9 @@
 #error AES is disabled.
 #endif

-static const int AES_DECRYPT = 0;
-static const int AES_ENCRYPT = 1;
+#define AES_ENCRYPT	1
+#define AES_DECRYPT	0
+
 /* Because array size can't be a const in C, the following two are macros.
   Both sizes are in bytes. */
 #define AES_MAXNR 14
@@ -99,7 +100,9 @@ void AES_ofb128_encrypt(const unsigned char *in, unsigned char *out,
 	unsigned char *ivec, int *num);
 void AES_ctr128_encrypt(const unsigned char *in, unsigned char *out,
 	const unsigned long length, const AES_KEY *key,
-	unsigned char *counter, unsigned int *num);
+	unsigned char counter[AES_BLOCK_SIZE],
+	unsigned char ecount_buf[AES_BLOCK_SIZE],
+	unsigned int *num);


 #ifdef  __cplusplus
--- a/crypto/aes/aes_cbc.c
+++ b/crypto/aes/aes_cbc.c
@@ -49,7 +49,13 @@
 *
 */

+#ifndef AES_DEBUG
+# ifndef NDEBUG
+#  define NDEBUG
+# endif
+#endif
 #include <assert.h>
+
 #include <openssl/aes.h>
 #include "aes_locl.h"

@@ -57,33 +63,49 @@ void AES_cbc_encrypt(const unsigned char *in, unsigned char *out,
 		     const unsigned long length, const AES_KEY *key,
 		     unsigned char *ivec, const int enc) {

-	int n;
+	unsigned long n;
 	unsigned long len = length;
-	unsigned char tmp[16];
+	unsigned char tmp[AES_BLOCK_SIZE];

 	assert(in && out && key && ivec);
-	assert(length % AES_BLOCK_SIZE == 0);
 	assert((AES_ENCRYPT == enc)||(AES_DECRYPT == enc));

-	if (AES_ENCRYPT == enc)
-		while (len > 0) {
-			for(n=0; n < 16; ++n)
+	if (AES_ENCRYPT == enc) {
+		while (len >= AES_BLOCK_SIZE) {
+			for(n=0; n < sizeof tmp; ++n)
 				tmp[n] = in[n] ^ ivec[n];
 			AES_encrypt(tmp, out, key);
-			memcpy(ivec, out, 16);
-			len -= 16;
-			in += 16;
-			out += 16;
+			memcpy(ivec, out, AES_BLOCK_SIZE);
+			len -= AES_BLOCK_SIZE;
+			in += AES_BLOCK_SIZE;
+			out += AES_BLOCK_SIZE;
 		}
-	else
-		while (len > 0) {
-			memcpy(tmp, in, 16);
+		if (len) {
+			for(n=0; n < len; ++n)
+				tmp[n] = in[n] ^ ivec[n];
+			for(n=len; n < AES_BLOCK_SIZE; ++n)
+				tmp[n] = ivec[n];
+			AES_encrypt(tmp, tmp, key);
+			memcpy(out, tmp, len);
+			memcpy(ivec, tmp, sizeof tmp);
+		}			
+	} else {
+		while (len >= AES_BLOCK_SIZE) {
+			memcpy(tmp, in, sizeof tmp);
 			AES_decrypt(in, out, key);
-			for(n=0; n < 16; ++n)
+			for(n=0; n < AES_BLOCK_SIZE; ++n)
 				out[n] ^= ivec[n];
-			memcpy(ivec, tmp, 16);
-			len -= 16;
-			in += 16;
-			out += 16;
+			memcpy(ivec, tmp, AES_BLOCK_SIZE);
+			len -= AES_BLOCK_SIZE;
+			in += AES_BLOCK_SIZE;
+			out += AES_BLOCK_SIZE;
 		}
+		if (len) {
+			memcpy(tmp, in, sizeof tmp);
+			AES_decrypt(tmp, tmp, key);
+			for(n=0; n < len; ++n)
+				out[n] ^= ivec[n];
+			memcpy(ivec, tmp, sizeof tmp);
+		}			
+	}
 }
--- a/crypto/aes/aes_cfb.c
+++ b/crypto/aes/aes_cfb.c
@@ -105,7 +105,13 @@
 * [including the GNU Public Licence.]
 */

+#ifndef AES_DEBUG
+# ifndef NDEBUG
+#  define NDEBUG
+# endif
+#endif
 #include <assert.h>
+
 #include <openssl/aes.h>
 #include "aes_locl.h"

--- a/crypto/aes/aes_core.c
+++ b/crypto/aes/aes_core.c
@@ -28,7 +28,13 @@
 /* Note: rewritten a little bit to provide error control and an OpenSSL-
   compatible API */

+#ifndef AES_DEBUG
+# ifndef NDEBUG
+#  define NDEBUG
+# endif
+#endif
 #include <assert.h>
+
 #include <stdlib.h>
 #include <openssl/aes.h>
 #include "aes_locl.h"
--- a/crypto/aes/aes_ctr.c
+++ b/crypto/aes/aes_ctr.c
@@ -49,7 +49,13 @@
 *
 */

+#ifndef AES_DEBUG
+# ifndef NDEBUG
+#  define NDEBUG
+# endif
+#endif
 #include <assert.h>
+
 #include <openssl/aes.h>
 #include "aes_locl.h"

@@ -90,26 +96,31 @@ static void AES_ctr128_inc(unsigned char *counter) {

 /* The input encrypted as though 128bit counter mode is being
 * used.  The extra state information to record how much of the
- * 128bit block we have used is contained in *num;
+ * 128bit block we have used is contained in *num, and the
+ * encrypted counter is kept in ecount_buf.  Both *num and
+ * ecount_buf must be initialised with zeros before the first
+ * call to AES_ctr128_encrypt().
 */
 void AES_ctr128_encrypt(const unsigned char *in, unsigned char *out,
 	const unsigned long length, const AES_KEY *key,
-	unsigned char *counter, unsigned int *num) {
+	unsigned char counter[AES_BLOCK_SIZE],
+	unsigned char ecount_buf[AES_BLOCK_SIZE],
+	unsigned int *num) {

 	unsigned int n;
 	unsigned long l=length;
-	unsigned char tmp[AES_BLOCK_SIZE];

 	assert(in && out && key && counter && num);
+	assert(*num < AES_BLOCK_SIZE);

 	n = *num;

 	while (l--) {
 		if (n == 0) {
-			AES_encrypt(counter, tmp, key);
+			AES_encrypt(counter, ecount_buf, key);
 			AES_ctr128_inc(counter);
 		}
-		*(out++) = *(in++) ^ tmp[n];
+		*(out++) = *(in++) ^ ecount_buf[n];
 		n = (n+1) % AES_BLOCK_SIZE;
 	}

--- a/crypto/aes/aes_ecb.c
+++ b/crypto/aes/aes_ecb.c
@@ -49,7 +49,13 @@
 *
 */

+#ifndef AES_DEBUG
+# ifndef NDEBUG
+#  define NDEBUG
+# endif
+#endif
 #include <assert.h>
+
 #include <openssl/aes.h>
 #include "aes_locl.h"

--- a/crypto/aes/aes_locl.h
+++ b/crypto/aes/aes_locl.h
@@ -62,7 +62,7 @@
 #include <stdlib.h>
 #include <string.h>

-#ifdef _MSC_VER
+#if defined(_MSC_VER) && !defined(OPENSSL_SYS_WINCE)
 # define SWAP(x) (_lrotl(x, 8) & 0x00ff00ff | _lrotr(x, 8) & 0xff00ff00)
 # define GETU32(p) SWAP(*((u32 *)(p)))
 # define PUTU32(ct, st) { *((u32 *)(ct)) = SWAP((st)); }
--- a/crypto/aes/aes_ofb.c
+++ b/crypto/aes/aes_ofb.c
@@ -105,7 +105,13 @@
 * [including the GNU Public Licence.]
 */

+#ifndef AES_DEBUG
+# ifndef NDEBUG
+#  define NDEBUG
+# endif
+#endif
 #include <assert.h>
+
 #include <openssl/aes.h>
 #include "aes_locl.h"

--- a/crypto/asn1/Makefile.ssl
+++ b/crypto/asn1/Makefile.ssl
@@ -98,7 +98,7 @@ lint:
 	lint -DLINT $(INCLUDES) $(SRC)>fluff

 depend:
-	$(MAKEDEPEND) $(CFLAG) $(INCLUDES) $(DEPFLAG) $(PROGS) $(LIBSRC)
+	$(MAKEDEPEND) -- $(CFLAG) $(INCLUDES) $(DEPFLAG) -- $(PROGS) $(LIBSRC)

 dclean:
 	$(PERL) -pe 'if (/^# DO NOT DELETE THIS LINE/) {print; exit(0);}' $(MAKEFILE) >Makefile.new
@@ -286,13 +286,14 @@ a_sign.o: ../../include/openssl/stack.h ../../include/openssl/symhacks.h
 a_sign.o: ../../include/openssl/ui.h ../../include/openssl/ui_compat.h
 a_sign.o: ../../include/openssl/x509.h ../../include/openssl/x509_vfy.h
 a_sign.o: ../cryptlib.h a_sign.c
-a_strex.o: ../../include/openssl/aes.h ../../include/openssl/asn1.h
-a_strex.o: ../../include/openssl/bio.h ../../include/openssl/blowfish.h
-a_strex.o: ../../include/openssl/bn.h ../../include/openssl/buffer.h
-a_strex.o: ../../include/openssl/cast.h ../../include/openssl/crypto.h
-a_strex.o: ../../include/openssl/des.h ../../include/openssl/des_old.h
-a_strex.o: ../../include/openssl/dh.h ../../include/openssl/dsa.h
-a_strex.o: ../../include/openssl/e_os2.h ../../include/openssl/evp.h
+a_strex.o: ../../e_os.h ../../include/openssl/aes.h
+a_strex.o: ../../include/openssl/asn1.h ../../include/openssl/bio.h
+a_strex.o: ../../include/openssl/blowfish.h ../../include/openssl/bn.h
+a_strex.o: ../../include/openssl/buffer.h ../../include/openssl/cast.h
+a_strex.o: ../../include/openssl/crypto.h ../../include/openssl/des.h
+a_strex.o: ../../include/openssl/des_old.h ../../include/openssl/dh.h
+a_strex.o: ../../include/openssl/dsa.h ../../include/openssl/e_os2.h
+a_strex.o: ../../include/openssl/err.h ../../include/openssl/evp.h
 a_strex.o: ../../include/openssl/idea.h ../../include/openssl/lhash.h
 a_strex.o: ../../include/openssl/md2.h ../../include/openssl/md4.h
 a_strex.o: ../../include/openssl/md5.h ../../include/openssl/mdc2.h
@@ -305,7 +306,7 @@ a_strex.o: ../../include/openssl/rsa.h ../../include/openssl/safestack.h
 a_strex.o: ../../include/openssl/sha.h ../../include/openssl/stack.h
 a_strex.o: ../../include/openssl/symhacks.h ../../include/openssl/ui.h
 a_strex.o: ../../include/openssl/ui_compat.h ../../include/openssl/x509.h
-a_strex.o: ../../include/openssl/x509_vfy.h a_strex.c charmap.h
+a_strex.o: ../../include/openssl/x509_vfy.h ../cryptlib.h a_strex.c charmap.h
 a_strnid.o: ../../e_os.h ../../include/openssl/asn1.h
 a_strnid.o: ../../include/openssl/bio.h ../../include/openssl/bn.h
 a_strnid.o: ../../include/openssl/buffer.h ../../include/openssl/crypto.h
--- a/crypto/asn1/a_bitstr.c
+++ b/crypto/asn1/a_bitstr.c
@@ -120,6 +120,12 @@ ASN1_BIT_STRING *c2i_ASN1_BIT_STRING(ASN1_BIT_STRING **a, unsigned char **pp,
 	unsigned char *p,*s;
 	int i;

+	if (len < 1)
+		{
+		i=ASN1_R_STRING_TOO_SHORT;
+		goto err;
+		}
+
 	if ((a == NULL) || ((*a) == NULL))
 		{
 		if ((ret=M_ASN1_BIT_STRING_new()) == NULL) return(NULL);
@@ -185,7 +191,9 @@ int ASN1_BIT_STRING_set_bit(ASN1_BIT_STRING *a, int n, int value)
 		if (a->data == NULL)
 			c=(unsigned char *)OPENSSL_malloc(w+1);
 		else
-			c=(unsigned char *)OPENSSL_realloc(a->data,w+1);
+			c=(unsigned char *)OPENSSL_realloc_clean(a->data,
+								 a->length,
+								 w+1);
 		if (c == NULL) return(0);
 		if (w+1-a->length > 0) memset(c+a->length, 0, w+1-a->length);
 		a->data=c;
--- a/crypto/asn1/a_bytes.c
+++ b/crypto/asn1/a_bytes.c
@@ -285,7 +285,7 @@ static int asn1_collate_primitive(ASN1_STRING *a, ASN1_CTX *c)
 			goto err;
 			}

-		if (!BUF_MEM_grow(&b,num+os->length))
+		if (!BUF_MEM_grow_clean(&b,num+os->length))
 			{
 			c->error=ERR_R_BUF_LIB;
 			goto err;
--- a/crypto/asn1/a_d2i_fp.c
+++ b/crypto/asn1/a_d2i_fp.c
@@ -149,7 +149,12 @@ static int asn1_d2i_read_bio(BIO *in, BUF_MEM **pb)
 	ASN1_CTX c;
 	int want=HEADER_SIZE;
 	int eos=0;
+#if defined(__GNUC__) && defined(__ia64)
+	/* pathetic compiler bug in all known versions as of Nov. 2002 */
+	long off=0;
+#else
 	int off=0;
+#endif
 	int len=0;

 	b=BUF_MEM_new();
@@ -166,7 +171,7 @@ static int asn1_d2i_read_bio(BIO *in, BUF_MEM **pb)
 			{
 			want-=(len-off);

-			if (!BUF_MEM_grow(b,len+want))
+			if (!BUF_MEM_grow_clean(b,len+want))
 				{
 				ASN1err(ASN1_F_ASN1_D2I_BIO,ERR_R_MALLOC_FAILURE);
 				goto err;
@@ -221,18 +226,23 @@ static int asn1_d2i_read_bio(BIO *in, BUF_MEM **pb)
 			if (want > (len-off))
 				{
 				want-=(len-off);
-				if (!BUF_MEM_grow(b,len+want))
+				if (!BUF_MEM_grow_clean(b,len+want))
 					{
 					ASN1err(ASN1_F_ASN1_D2I_BIO,ERR_R_MALLOC_FAILURE);
 					goto err;
 					}
-				i=BIO_read(in,&(b->data[len]),want);
-				if (i <= 0)
+				while (want > 0)
 					{
-					ASN1err(ASN1_F_ASN1_D2I_BIO,ASN1_R_NOT_ENOUGH_DATA);
-					goto err;
+					i=BIO_read(in,&(b->data[len]),want);
+					if (i <= 0)
+						{
+						ASN1err(ASN1_F_ASN1_D2I_BIO,
+						    ASN1_R_NOT_ENOUGH_DATA);
+						goto err;
+						}
+					len+=i;
+					want -= i;
 					}
-				len+=i;
 				}
 			off+=(int)c.slen;
 			if (eos <= 0)
--- a/crypto/asn1/a_object.c
+++ b/crypto/asn1/a_object.c
@@ -183,8 +183,8 @@ int i2a_ASN1_OBJECT(BIO *bp, ASN1_OBJECT *a)

 	if ((a == NULL) || (a->data == NULL))
 		return(BIO_write(bp,"NULL",4));
-	i=i2t_ASN1_OBJECT(buf,80,a);
-	if (i > 80) i=80;
+	i=i2t_ASN1_OBJECT(buf,sizeof buf,a);
+	if (i > sizeof buf) i=sizeof buf;
 	BIO_write(bp,buf,i);
 	return(i);
 	}
--- a/crypto/asn1/a_sign.c
+++ b/crypto/asn1/a_sign.c
@@ -204,9 +204,9 @@ int ASN1_sign(int (*i2d)(), X509_ALGOR *algor1, X509_ALGOR *algor2,
 err:
 	EVP_MD_CTX_cleanup(&ctx);
 	if (buf_in != NULL)
-		{ memset((char *)buf_in,0,(unsigned int)inl); OPENSSL_free(buf_in); }
+		{ OPENSSL_cleanse((char *)buf_in,(unsigned int)inl); OPENSSL_free(buf_in); }
 	if (buf_out != NULL)
-		{ memset((char *)buf_out,0,outll); OPENSSL_free(buf_out); }
+		{ OPENSSL_cleanse((char *)buf_out,outll); OPENSSL_free(buf_out); }
 	return(outl);
 	}

@@ -287,8 +287,8 @@ int ASN1_item_sign(const ASN1_ITEM *it, X509_ALGOR *algor1, X509_ALGOR *algor2,
 err:
 	EVP_MD_CTX_cleanup(&ctx);
 	if (buf_in != NULL)
-		{ memset((char *)buf_in,0,(unsigned int)inl); OPENSSL_free(buf_in); }
+		{ OPENSSL_cleanse((char *)buf_in,(unsigned int)inl); OPENSSL_free(buf_in); }
 	if (buf_out != NULL)
-		{ memset((char *)buf_out,0,outll); OPENSSL_free(buf_out); }
+		{ OPENSSL_cleanse((char *)buf_out,outll); OPENSSL_free(buf_out); }
 	return(outl);
 	}
--- a/crypto/asn1/a_strex.c
+++ b/crypto/asn1/a_strex.c
@@ -63,6 +63,7 @@
 #include <openssl/asn1.h>

 #include "charmap.h"
+#include "cryptlib.h"

 /* ASN1_STRING_print_ex() and X509_NAME_print_ex().
 * Enhanced string and name printing routines handling
@@ -114,14 +115,17 @@ typedef int char_io(void *arg, const void *buf, int len);
 static int do_esc_char(unsigned long c, unsigned char flags, char *do_quotes, char_io *io_ch, void *arg)
 {
 	unsigned char chflgs, chtmp;
-	char tmphex[11];
+	char tmphex[HEX_SIZE(long)+3];
+
+	if(c > 0xffffffffL)
+		return -1;
 	if(c > 0xffff) {
-		BIO_snprintf(tmphex, 11, "\\W%08lX", c);
+		BIO_snprintf(tmphex, sizeof tmphex, "\\W%08lX", c);
 		if(!io_ch(arg, tmphex, 10)) return -1;
 		return 10;
 	}
 	if(c > 0xff) {
-		BIO_snprintf(tmphex, 11, "\\U%04lX", c);
+		BIO_snprintf(tmphex, sizeof tmphex, "\\U%04lX", c);
 		if(!io_ch(arg, tmphex, 6)) return -1;
 		return 6;
 	}
@@ -195,7 +199,7 @@ static int do_buf(unsigned char *buf, int buflen,
 		if(type & BUF_TYPE_CONVUTF8) {
 			unsigned char utfbuf[6];
 			int utflen;
-			utflen = UTF8_putc(utfbuf, 6, c);
+			utflen = UTF8_putc(utfbuf, sizeof utfbuf, c);
 			for(i = 0; i < utflen; i++) {
 				/* We don't need to worry about setting orflags correctly
 				 * because if utflen==1 its value will be correct anyway 
@@ -461,7 +465,7 @@ static int do_name_ex(char_io *io_ch, void *arg, X509_NAME *n,
 		if(fn_opt != XN_FLAG_FN_NONE) {
 			int objlen, fld_len;
 			if((fn_opt == XN_FLAG_FN_OID) || (fn_nid==NID_undef) ) {
-				OBJ_obj2txt(objtmp, 80, fn, 1);
+				OBJ_obj2txt(objtmp, sizeof objtmp, fn, 1);
 				fld_len = 0; /* XXX: what should this be? */
 				objbuf = objtmp;
 			} else {
@@ -544,7 +548,7 @@ int ASN1_STRING_to_UTF8(unsigned char **out, ASN1_STRING *in)
 {
 	ASN1_STRING stmp, *str = &stmp;
 	int mbflag, type, ret;
-	if(!*out || !in) return -1;
+	if(!in) return -1;
 	type = in->type;
 	if((type < 0) || (type > 30)) return -1;
 	mbflag = tag2nbyte[type];
@@ -553,6 +557,6 @@ int ASN1_STRING_to_UTF8(unsigned char **out, ASN1_STRING *in)
 	stmp.data = NULL;
 	ret = ASN1_mbstring_copy(&str, in->data, in->length, mbflag, B_ASN1_UTF8STRING);
 	if(ret < 0) return ret;
-	if(out) *out = stmp.data;
+	*out = stmp.data;
 	return stmp.length;
 }
--- a/crypto/asn1/a_time.c
+++ b/crypto/asn1/a_time.c
@@ -152,7 +152,7 @@ ASN1_GENERALIZEDTIME *ASN1_TIME_to_generalizedtime(ASN1_TIME *t, ASN1_GENERALIZE
 	if (t->data[0] >= '5') strcpy(str, "19");
 	else strcpy(str, "20");

-	strcat(str, (char *)t->data);
+	BUF_strlcat(str, (char *)t->data, t->length+2);

 	return ret;
 	}
--- a/crypto/asn1/a_type.c
+++ b/crypto/asn1/a_type.c
@@ -62,7 +62,7 @@

 int ASN1_TYPE_get(ASN1_TYPE *a)
 	{
-	if (a->value.ptr != NULL)
+	if ((a->value.ptr != NULL) || (a->type == V_ASN1_NULL))
 		return(a->type);
 	else
 		return(0);
--- a/crypto/asn1/a_verify.c
+++ b/crypto/asn1/a_verify.c
@@ -103,7 +103,7 @@ int ASN1_verify(int (*i2d)(), X509_ALGOR *a, ASN1_BIT_STRING *signature,
 	EVP_VerifyInit_ex(&ctx,type, NULL);
 	EVP_VerifyUpdate(&ctx,(unsigned char *)buf_in,inl);

-	memset(buf_in,0,(unsigned int)inl);
+	OPENSSL_cleanse(buf_in,(unsigned int)inl);
 	OPENSSL_free(buf_in);

 	if (EVP_VerifyFinal(&ctx,(unsigned char *)signature->data,
@@ -153,7 +153,7 @@ int ASN1_item_verify(const ASN1_ITEM *it, X509_ALGOR *a, ASN1_BIT_STRING *signat
 	EVP_VerifyInit_ex(&ctx,type, NULL);
 	EVP_VerifyUpdate(&ctx,(unsigned char *)buf_in,inl);

-	memset(buf_in,0,(unsigned int)inl);
+	OPENSSL_cleanse(buf_in,(unsigned int)inl);
 	OPENSSL_free(buf_in);

 	if (EVP_VerifyFinal(&ctx,(unsigned char *)signature->data,
--- a/crypto/asn1/asn1.h
+++ b/crypto/asn1/asn1.h
@@ -70,7 +70,6 @@

 #include <openssl/symhacks.h>

-#include <openssl/e_os2.h>
 #include <openssl/ossl_typ.h>

 #ifdef OPENSSL_BUILD_SHLIBCRYPTO
--- a/crypto/asn1/asn1_lib.c
+++ b/crypto/asn1/asn1_lib.c
@@ -57,6 +57,7 @@
 */

 #include <stdio.h>
+#include <limits.h>
 #include "cryptlib.h"
 #include <openssl/asn1.h>
 #include <openssl/asn1_mac.h>
@@ -124,7 +125,7 @@ int ASN1_get_object(unsigned char **pp, long *plength, int *ptag, int *pclass,
 		(int)(omax+ *pp));

 #endif
-	if (*plength > (omax - (*pp - p)))
+	if (*plength > (omax - (p - *pp)))
 		{
 		ASN1err(ASN1_F_ASN1_GET_OBJECT,ASN1_R_TOO_LONG);
 		/* Set this so that even if things are not long enough
@@ -141,7 +142,7 @@ err:
 static int asn1_get_length(unsigned char **pp, int *inf, long *rl, int max)
 	{
 	unsigned char *p= *pp;
-	long ret=0;
+	unsigned long ret=0;
 	int i;

 	if (max-- < 1) return(0);
@@ -170,10 +171,10 @@ static int asn1_get_length(unsigned char **pp, int *inf, long *rl, int max)
 		else
 			ret=i;
 		}
-	if (ret < 0)
+	if (ret > LONG_MAX)
 		return 0;
 	*pp=p;
-	*rl=ret;
+	*rl=(long)ret;
 	return(1);
 	}

--- a/crypto/asn1/asn1_par.c
+++ b/crypto/asn1/asn1_par.c
@@ -79,12 +79,7 @@ static int asn1_print_info(BIO *bp, int tag, int xclass, int constructed,
 	else
 		p="prim: ";
 	if (BIO_write(bp,p,6) < 6) goto err;
-	if (indent)
-		{
-		if (indent > 128) indent=128;
-		memset(str,' ',indent);
-		if (BIO_write(bp,str,indent) < indent) goto err;
-		}
+	BIO_indent(bp,indent,128);

 	p=str;
 	if ((xclass & V_ASN1_PRIVATE) == V_ASN1_PRIVATE)
--- a/crypto/asn1/f_int.c
+++ b/crypto/asn1/f_int.c
@@ -169,8 +169,7 @@ int a2i_ASN1_INTEGER(BIO *bp, ASN1_INTEGER *bs, char *buf, int size)
 				sp=(unsigned char *)OPENSSL_malloc(
 					(unsigned int)num+i*2);
 			else
-				sp=(unsigned char *)OPENSSL_realloc(s,
-					(unsigned int)num+i*2);
+				sp=OPENSSL_realloc_clean(s,slen,num+i*2);
 			if (sp == NULL)
 				{
 				ASN1err(ASN1_F_A2I_ASN1_INTEGER,ERR_R_MALLOC_FAILURE);
--- a/crypto/asn1/n_pkey.c
+++ b/crypto/asn1/n_pkey.c
@@ -187,7 +187,7 @@ int i2d_RSA_NET(const RSA *a, unsigned char **pp, int (*cb)(), int sgckey)
 	i2d_NETSCAPE_PKEY(pkey,&zz);

 	/* Wipe the private key encoding */
-	memset(pkey->private_key->data, 0, rsalen);
+	OPENSSL_cleanse(pkey->private_key->data, rsalen);
 		
 	if (cb == NULL)
 		cb=EVP_read_pw_string;
@@ -206,7 +206,7 @@ int i2d_RSA_NET(const RSA *a, unsigned char **pp, int (*cb)(), int sgckey)
 	}

 	EVP_BytesToKey(EVP_rc4(),EVP_md5(),NULL,buf,i,1,key,NULL);
-	memset(buf,0,256);
+	OPENSSL_cleanse(buf,256);

 	/* Encrypt private key in place */
 	zz = enckey->enckey->digest->data;
@@ -294,7 +294,7 @@ static RSA *d2i_RSA_NET_2(RSA **a, ASN1_OCTET_STRING *os,
 	}
 		
 	EVP_BytesToKey(EVP_rc4(),EVP_md5(),NULL,buf,i,1,key,NULL);
-	memset(buf,0,256);
+	OPENSSL_cleanse(buf,256);

 	EVP_CIPHER_CTX_init(&ctx);
 	EVP_DecryptInit_ex(&ctx,EVP_rc4(),NULL, key,NULL);
--- a/crypto/asn1/p8_pkey.c
+++ b/crypto/asn1/p8_pkey.c
@@ -68,8 +68,8 @@ static int pkey_cb(int operation, ASN1_VALUE **pval, const ASN1_ITEM *it)
 	if(operation == ASN1_OP_FREE_PRE) {
 		PKCS8_PRIV_KEY_INFO *key = (PKCS8_PRIV_KEY_INFO *)*pval;
 		if (key->pkey->value.octet_string)
-		memset(key->pkey->value.octet_string->data,
-				 0, key->pkey->value.octet_string->length);
+		OPENSSL_cleanse(key->pkey->value.octet_string->data,
+			key->pkey->value.octet_string->length);
 	}
 	return 1;
 }
--- a/crypto/asn1/t_crl.c
+++ b/crypto/asn1/t_crl.c
@@ -84,11 +84,11 @@ int X509_CRL_print_fp(FILE *fp, X509_CRL *x)

 int X509_CRL_print(BIO *out, X509_CRL *x)
 {
-	char buf[256];
 	STACK_OF(X509_REVOKED) *rev;
 	X509_REVOKED *r;
 	long l;
 	int i, n;
+	char *p;

 	BIO_printf(out, "Certificate Revocation List (CRL):\n");
 	l = X509_CRL_get_version(x);
@@ -96,8 +96,9 @@ int X509_CRL_print(BIO *out, X509_CRL *x)
 	i = OBJ_obj2nid(x->sig_alg->algorithm);
 	BIO_printf(out, "%8sSignature Algorithm: %s\n", "",
 				 (i == NID_undef) ? "NONE" : OBJ_nid2ln(i));
-	X509_NAME_oneline(X509_CRL_get_issuer(x),buf,256);
-	BIO_printf(out,"%8sIssuer: %s\n","",buf);
+	p=X509_NAME_oneline(X509_CRL_get_issuer(x),NULL,0);
+	BIO_printf(out,"%8sIssuer: %s\n","",p);
+	OPENSSL_free(p);
 	BIO_printf(out,"%8sLast Update: ","");
 	ASN1_TIME_print(out,X509_CRL_get_lastUpdate(x));
 	BIO_printf(out,"\n%8sNext Update: ","");
--- a/crypto/asn1/t_pkey.c
+++ b/crypto/asn1/t_pkey.c
@@ -130,14 +130,10 @@ int RSA_print(BIO *bp, const RSA *x, int off)
 		goto err;
 		}

-	if (off)
-		{
-		if (off > 128) off=128;
-		memset(str,' ',off);
-		}
 	if (x->d != NULL)
 		{
-		if (off && (BIO_write(bp,str,off) <= 0)) goto err;
+		if(!BIO_indent(bp,off,128))
+		   goto err;
 		if (BIO_printf(bp,"Private-Key: (%d bit)\n",BN_num_bits(x->n))
 			<= 0) goto err;
 		}
@@ -183,7 +179,6 @@ int DSA_print_fp(FILE *fp, const DSA *x, int off)

 int DSA_print(BIO *bp, const DSA *x, int off)
 	{
-	char str[128];
 	unsigned char *m=NULL;
 	int ret=0;
 	size_t buf_len=0,i;
@@ -210,14 +205,10 @@ int DSA_print(BIO *bp, const DSA *x, int off)
 		goto err;
 		}

-	if (off)
-		{
-		if (off > 128) off=128;
-		memset(str,' ',off);
-		}
 	if (x->priv_key != NULL)
 		{
-		if (off && (BIO_write(bp,str,off) <= 0)) goto err;
+		if(!BIO_indent(bp,off,128))
+		   goto err;
 		if (BIO_printf(bp,"Private-Key: (%d bit)\n",BN_num_bits(x->p))
 			<= 0) goto err;
 		}
@@ -240,17 +231,12 @@ static int print(BIO *bp, const char *number, BIGNUM *num, unsigned char *buf,
 	     int off)
 	{
 	int n,i;
-	char str[128];
 	const char *neg;

 	if (num == NULL) return(1);
 	neg=(num->neg)?"-":"";
-	if (off)
-		{
-		if (off > 128) off=128;
-		memset(str,' ',off);
-		if (BIO_write(bp,str,off) <= 0) return(0);
-		}
+	if(!BIO_indent(bp,off,128))
+		return 0;

 	if (BN_num_bytes(num) <= BN_BYTES)
 		{
@@ -274,9 +260,9 @@ static int print(BIO *bp, const char *number, BIGNUM *num, unsigned char *buf,
 			{
 			if ((i%15) == 0)
 				{
-				str[0]='\n';
-				memset(&(str[1]),' ',off+4);
-				if (BIO_write(bp,str,off+1+4) <= 0) return(0);
+				if(BIO_puts(bp,"\n") <= 0
+				   || !BIO_indent(bp,off+4,128))
+				    return 0;
 				}
 			if (BIO_printf(bp,"%02x%s",buf[i],((i+1) == n)?"":":")
 				<= 0) return(0);
--- a/crypto/asn1/t_req.c
+++ b/crypto/asn1/t_req.c
@@ -82,7 +82,7 @@ int X509_REQ_print_fp(FILE *fp, X509_REQ *x)
        }
 #endif

-int X509_REQ_print(BIO *bp, X509_REQ *x)
+int X509_REQ_print_ex(BIO *bp, X509_REQ *x, unsigned long nmflags, unsigned long cflag)
 	{
 	unsigned long l;
 	int i;
@@ -91,144 +91,186 @@ int X509_REQ_print(BIO *bp, X509_REQ *x)
 	EVP_PKEY *pkey;
 	STACK_OF(X509_ATTRIBUTE) *sk;
 	STACK_OF(X509_EXTENSION) *exts;
-	char str[128];
+	char mlch = ' ';
+	int nmindent = 0;

-	ri=x->req_info;
-	sprintf(str,"Certificate Request:\n");
-	if (BIO_puts(bp,str) <= 0) goto err;
-	sprintf(str,"%4sData:\n","");
-	if (BIO_puts(bp,str) <= 0) goto err;
-
-	neg=(ri->version->type == V_ASN1_NEG_INTEGER)?"-":"";
-	l=0;
-	for (i=0; i<ri->version->length; i++)
-		{ l<<=8; l+=ri->version->data[i]; }
-	sprintf(str,"%8sVersion: %s%lu (%s0x%lx)\n","",neg,l,neg,l);
-	if (BIO_puts(bp,str) <= 0) goto err;
-	sprintf(str,"%8sSubject: ","");
-	if (BIO_puts(bp,str) <= 0) goto err;
-
-	X509_NAME_print(bp,ri->subject,16);
-	sprintf(str,"\n%8sSubject Public Key Info:\n","");
-	if (BIO_puts(bp,str) <= 0) goto err;
-	i=OBJ_obj2nid(ri->pubkey->algor->algorithm);
-	sprintf(str,"%12sPublic Key Algorithm: %s\n","",
-		(i == NID_undef)?"UNKNOWN":OBJ_nid2ln(i));
-	if (BIO_puts(bp,str) <= 0) goto err;
-
-	pkey=X509_REQ_get_pubkey(x);
-#ifndef OPENSSL_NO_RSA
-	if (pkey != NULL && pkey->type == EVP_PKEY_RSA)
-		{
-		BIO_printf(bp,"%12sRSA Public Key: (%d bit)\n","",
-			BN_num_bits(pkey->pkey.rsa->n));
-		RSA_print(bp,pkey->pkey.rsa,16);
-		}
-	else 
-#endif
-#ifndef OPENSSL_NO_DSA
-		if (pkey != NULL && pkey->type == EVP_PKEY_DSA)
-		{
-		BIO_printf(bp,"%12sDSA Public Key:\n","");
-		DSA_print(bp,pkey->pkey.dsa,16);
-		}
-	else
-#endif
-		BIO_printf(bp,"%12sUnknown Public Key:\n","");
-
-	if (pkey != NULL)
-	    EVP_PKEY_free(pkey);
-
-	/* may not be */
-	sprintf(str,"%8sAttributes:\n","");
-	if (BIO_puts(bp,str) <= 0) goto err;
-
-	sk=x->req_info->attributes;
-	if (sk_X509_ATTRIBUTE_num(sk) == 0)
-		{
-		sprintf(str,"%12sa0:00\n","");
-		if (BIO_puts(bp,str) <= 0) goto err;
-		}
-	else
-		{
-		for (i=0; i<sk_X509_ATTRIBUTE_num(sk); i++)
-			{
-			ASN1_TYPE *at;
-			X509_ATTRIBUTE *a;
-			ASN1_BIT_STRING *bs=NULL;
-			ASN1_TYPE *t;
-			int j,type=0,count=1,ii=0;
-
-			a=sk_X509_ATTRIBUTE_value(sk,i);
-			if(X509_REQ_extension_nid(OBJ_obj2nid(a->object)))
-								continue;
-			sprintf(str,"%12s","");
-			if (BIO_puts(bp,str) <= 0) goto err;
-			if ((j=i2a_ASN1_OBJECT(bp,a->object)) > 0)
-			{
-			if (a->single)
-				{
-				t=a->value.single;
-				type=t->type;
-				bs=t->value.bit_string;
-				}
-			else
-				{
-				ii=0;
-				count=sk_ASN1_TYPE_num(a->value.set);
-get_next:
-				at=sk_ASN1_TYPE_value(a->value.set,ii);
-				type=at->type;
-				bs=at->value.asn1_string;
-				}
-			}
-			for (j=25-j; j>0; j--)
-				if (BIO_write(bp," ",1) != 1) goto err;
-			if (BIO_puts(bp,":") <= 0) goto err;
-			if (	(type == V_ASN1_PRINTABLESTRING) ||
-				(type == V_ASN1_T61STRING) ||
-				(type == V_ASN1_IA5STRING))
-				{
-				if (BIO_write(bp,(char *)bs->data,bs->length)
-					!= bs->length)
-					goto err;
-				BIO_puts(bp,"\n");
-				}
-			else
-				{
-				BIO_puts(bp,"unable to print attribute\n");
-				}
-			if (++ii < count) goto get_next;
-			}
-		}
-
-	exts = X509_REQ_get_extensions(x);
-	if(exts) {
-		BIO_printf(bp,"%8sRequested Extensions:\n","");
-		for (i=0; i<sk_X509_EXTENSION_num(exts); i++) {
-			ASN1_OBJECT *obj;
-			X509_EXTENSION *ex;
-			int j;
-			ex=sk_X509_EXTENSION_value(exts, i);
-			if (BIO_printf(bp,"%12s","") <= 0) goto err;
-			obj=X509_EXTENSION_get_object(ex);
-			i2a_ASN1_OBJECT(bp,obj);
-			j=X509_EXTENSION_get_critical(ex);
-			if (BIO_printf(bp,": %s\n",j?"critical":"","") <= 0)
-				goto err;
-			if(!X509V3_EXT_print(bp, ex, 0, 16)) {
-				BIO_printf(bp, "%16s", "");
-				M_ASN1_OCTET_STRING_print(bp,ex->value);
-			}
-			if (BIO_write(bp,"\n",1) <= 0) goto err;
-		}
-		sk_X509_EXTENSION_pop_free(exts, X509_EXTENSION_free);
+	if((nmflags & XN_FLAG_SEP_MASK) == XN_FLAG_SEP_MULTILINE) {
+		mlch = '\n';
+		nmindent = 12;
 	}

-	if(!X509_signature_print(bp, x->sig_alg, x->signature)) goto err;
+	if(nmflags == X509_FLAG_COMPAT)
+		nmindent = 16;
+
+
+	ri=x->req_info;
+	if(!(cflag & X509_FLAG_NO_HEADER))
+		{
+		if (BIO_write(bp,"Certificate Request:\n",21) <= 0) goto err;
+		if (BIO_write(bp,"    Data:\n",10) <= 0) goto err;
+		}
+	if(!(cflag & X509_FLAG_NO_VERSION))
+		{
+		neg=(ri->version->type == V_ASN1_NEG_INTEGER)?"-":"";
+		l=0;
+		for (i=0; i<ri->version->length; i++)
+			{ l<<=8; l+=ri->version->data[i]; }
+		if(BIO_printf(bp,"%8sVersion: %s%lu (%s0x%lx)\n","",neg,l,neg,
+			      l) <= 0)
+		    goto err;
+		}
+        if(!(cflag & X509_FLAG_NO_SUBJECT))
+                {
+                if (BIO_printf(bp,"        Subject:%c",mlch) <= 0) goto err;
+                if (X509_NAME_print_ex(bp,ri->subject,nmindent, nmflags) < 0) goto err;
+                if (BIO_write(bp,"\n",1) <= 0) goto err;
+                }
+	if(!(cflag & X509_FLAG_NO_PUBKEY))
+		{
+		if (BIO_write(bp,"        Subject Public Key Info:\n",33) <= 0)
+			goto err;
+		if (BIO_printf(bp,"%12sPublic Key Algorithm: ","") <= 0)
+			goto err;
+		if (i2a_ASN1_OBJECT(bp, ri->pubkey->algor->algorithm) <= 0)
+			goto err;
+		if (BIO_puts(bp, "\n") <= 0)
+			goto err;
+
+		pkey=X509_REQ_get_pubkey(x);
+		if (pkey == NULL)
+			{
+			BIO_printf(bp,"%12sUnable to load Public Key\n","");
+			ERR_print_errors(bp);
+			}
+		else
+#ifndef OPENSSL_NO_RSA
+		if (pkey->type == EVP_PKEY_RSA)
+			{
+			BIO_printf(bp,"%12sRSA Public Key: (%d bit)\n","",
+			BN_num_bits(pkey->pkey.rsa->n));
+			RSA_print(bp,pkey->pkey.rsa,16);
+			}
+		else
+#endif
+#ifndef OPENSSL_NO_DSA
+		if (pkey->type == EVP_PKEY_DSA)
+			{
+			BIO_printf(bp,"%12sDSA Public Key:\n","");
+			DSA_print(bp,pkey->pkey.dsa,16);
+			}
+		else
+#endif
+			BIO_printf(bp,"%12sUnknown Public Key:\n","");
+
+		EVP_PKEY_free(pkey);
+		}
+
+	if(!(cflag & X509_FLAG_NO_ATTRIBUTES))
+		{
+		/* may not be */
+		if(BIO_printf(bp,"%8sAttributes:\n","") <= 0)
+		    goto err;
+
+		sk=x->req_info->attributes;
+		if (sk_X509_ATTRIBUTE_num(sk) == 0)
+			{
+			if(BIO_printf(bp,"%12sa0:00\n","") <= 0)
+			    goto err;
+			}
+		else
+			{
+			for (i=0; i<sk_X509_ATTRIBUTE_num(sk); i++)
+				{
+				ASN1_TYPE *at;
+				X509_ATTRIBUTE *a;
+				ASN1_BIT_STRING *bs=NULL;
+				ASN1_TYPE *t;
+				int j,type=0,count=1,ii=0;
+
+				a=sk_X509_ATTRIBUTE_value(sk,i);
+				if(X509_REQ_extension_nid(OBJ_obj2nid(a->object)))
+									continue;
+				if(BIO_printf(bp,"%12s","") <= 0)
+				    goto err;
+				if ((j=i2a_ASN1_OBJECT(bp,a->object)) > 0)
+				{
+				if (a->single)
+					{
+					t=a->value.single;
+					type=t->type;
+					bs=t->value.bit_string;
+					}
+				else
+					{
+					ii=0;
+					count=sk_ASN1_TYPE_num(a->value.set);
+get_next:
+					at=sk_ASN1_TYPE_value(a->value.set,ii);
+					type=at->type;
+					bs=at->value.asn1_string;
+					}
+				}
+				for (j=25-j; j>0; j--)
+					if (BIO_write(bp," ",1) != 1) goto err;
+				if (BIO_puts(bp,":") <= 0) goto err;
+				if (	(type == V_ASN1_PRINTABLESTRING) ||
+					(type == V_ASN1_T61STRING) ||
+					(type == V_ASN1_IA5STRING))
+					{
+					if (BIO_write(bp,(char *)bs->data,bs->length)
+						!= bs->length)
+						goto err;
+					BIO_puts(bp,"\n");
+					}
+				else
+					{
+					BIO_puts(bp,"unable to print attribute\n");
+					}
+				if (++ii < count) goto get_next;
+				}
+			}
+		}
+	if(!(cflag & X509_FLAG_NO_ATTRIBUTES))
+		{
+		exts = X509_REQ_get_extensions(x);
+		if(exts)
+			{
+			BIO_printf(bp,"%8sRequested Extensions:\n","");
+			for (i=0; i<sk_X509_EXTENSION_num(exts); i++)
+				{
+				ASN1_OBJECT *obj;
+				X509_EXTENSION *ex;
+				int j;
+				ex=sk_X509_EXTENSION_value(exts, i);
+				if (BIO_printf(bp,"%12s","") <= 0) goto err;
+				obj=X509_EXTENSION_get_object(ex);
+				i2a_ASN1_OBJECT(bp,obj);
+				j=X509_EXTENSION_get_critical(ex);
+				if (BIO_printf(bp,": %s\n",j?"critical":"","") <= 0)
+					goto err;
+				if(!X509V3_EXT_print(bp, ex, 0, 16))
+					{
+					BIO_printf(bp, "%16s", "");
+					M_ASN1_OCTET_STRING_print(bp,ex->value);
+					}
+				if (BIO_write(bp,"\n",1) <= 0) goto err;
+				}
+			sk_X509_EXTENSION_pop_free(exts, X509_EXTENSION_free);
+			}
+		}
+
+	if(!(cflag & X509_FLAG_NO_SIGDUMP))
+		{
+		if(!X509_signature_print(bp, x->sig_alg, x->signature)) goto err;
+		}

 	return(1);
 err:
 	X509err(X509_F_X509_REQ_PRINT,ERR_R_BUF_LIB);
 	return(0);
 	}
+
+int X509_REQ_print(BIO *bp, X509_REQ *x)
+	{
+	return X509_REQ_print_ex(bp, x, XN_FLAG_COMPAT, X509_FLAG_COMPAT);
+	}
--- a/crypto/asn1/t_x509.c
+++ b/crypto/asn1/t_x509.c
@@ -433,15 +433,17 @@ err:

 int X509_NAME_print(BIO *bp, X509_NAME *name, int obase)
 	{
-	char *s,*c;
+	char *s,*c,*b;
 	int ret=0,l,ll,i,first=1;
-	char buf[256];

 	ll=80-2-obase;

-	s=X509_NAME_oneline(name,buf,256);
+	b=s=X509_NAME_oneline(name,NULL,0);
 	if (!*s)
+		{
+		OPENSSL_free(b);
 		return 1;
+		}
 	s++; /* skip the first slash */

 	l=ll;
@@ -497,6 +499,7 @@ int X509_NAME_print(BIO *bp, X509_NAME *name, int obase)
 err:
 		X509err(X509_F_X509_NAME_PRINT,ERR_R_BUF_LIB);
 		}
+	OPENSSL_free(b);
 	return(ret);
 	}

--- a/crypto/asn1/t_x509a.c
+++ b/crypto/asn1/t_x509a.c
@@ -77,7 +77,7 @@ int X509_CERT_AUX_print(BIO *out, X509_CERT_AUX *aux, int indent)
 		for(i = 0; i < sk_ASN1_OBJECT_num(aux->trust); i++) {
 			if(!first) BIO_puts(out, ", ");
 			else first = 0;
-			OBJ_obj2txt(oidstr, 80,
+			OBJ_obj2txt(oidstr, sizeof oidstr,
 				sk_ASN1_OBJECT_value(aux->trust, i), 0);
 			BIO_puts(out, oidstr);
 		}
@@ -90,7 +90,7 @@ int X509_CERT_AUX_print(BIO *out, X509_CERT_AUX *aux, int indent)
 		for(i = 0; i < sk_ASN1_OBJECT_num(aux->reject); i++) {
 			if(!first) BIO_puts(out, ", ");
 			else first = 0;
-			OBJ_obj2txt(oidstr, 80,
+			OBJ_obj2txt(oidstr, sizeof oidstr,
 				sk_ASN1_OBJECT_value(aux->reject, i), 0);
 			BIO_puts(out, oidstr);
 		}
--- a/crypto/asn1/tasn_dec.c
+++ b/crypto/asn1/tasn_dec.c
@@ -664,7 +664,7 @@ static int asn1_d2i_ex_primitive(ASN1_VALUE **pval, unsigned char **in, long inl
 		if(!asn1_collect(&buf, &p, plen, inf, -1, V_ASN1_UNIVERSAL)) goto err;
 		len = buf.length;
 		/* Append a final null to string */
-		if(!BUF_MEM_grow(&buf, len + 1)) {
+		if(!BUF_MEM_grow_clean(&buf, len + 1)) {
 			ASN1err(ASN1_F_ASN1_D2I_EX_PRIMITIVE, ERR_R_MALLOC_FAILURE);
 			return 0;
 		}
@@ -857,7 +857,7 @@ static int collect_data(BUF_MEM *buf, unsigned char **p, long plen)
 		int len;
 		if(buf) {
 			len = buf->length;
-			if(!BUF_MEM_grow(buf, len + plen)) {
+			if(!BUF_MEM_grow_clean(buf, len + plen)) {
 				ASN1err(ASN1_F_COLLECT_DATA, ERR_R_MALLOC_FAILURE);
 				return 0;
 			}
@@ -913,10 +913,10 @@ static int asn1_check_tlen(long *olen, int *otag, unsigned char *oclass, char *i
 			ctx->ptag = ptag;
 			ctx->hdrlen = p - q;
 			ctx->valid = 1;
-			/* If definite length, length + header can't exceed total
-			 * amount of data available.
+			/* If definite length, and no error, length +
+			 * header can't exceed total amount of data available. 
 			 */
-			if(!(i & 1) && ((plen + ctx->hdrlen) > len)) {
+			if(!(i & 0x81) && ((plen + ctx->hdrlen) > len)) {
 				ASN1err(ASN1_F_ASN1_CHECK_TLEN, ASN1_R_TOO_LONG);
 				asn1_tlc_clear(ctx);
 				return 0;
--- a/crypto/asn1/tasn_fre.c
+++ b/crypto/asn1/tasn_fre.c
@@ -206,7 +206,10 @@ void ASN1_primitive_free(ASN1_VALUE **pval, const ASN1_ITEM *it)
 		break;

 		case V_ASN1_BOOLEAN:
-		*(ASN1_BOOLEAN *)pval = it->size;
+		if (it)
+			*(ASN1_BOOLEAN *)pval = it->size;
+		else
+			*(ASN1_BOOLEAN *)pval = -1;
 		return;

 		case V_ASN1_NULL:
--- a/crypto/asn1/tasn_new.c
+++ b/crypto/asn1/tasn_new.c
@@ -305,7 +305,10 @@ int ASN1_primitive_new(ASN1_VALUE **pval, const ASN1_ITEM *it)
 		return 1;

 		case V_ASN1_BOOLEAN:
-		*(ASN1_BOOLEAN *)pval = it->size;
+		if (it)
+			*(ASN1_BOOLEAN *)pval = it->size;
+		else
+			*(ASN1_BOOLEAN *)pval = -1;
 		return 1;

 		case V_ASN1_NULL:
--- a/crypto/asn1/tasn_prn.c
+++ b/crypto/asn1/tasn_prn.c
@@ -186,7 +186,7 @@ if(*bool == -1) printf("BOOL MISSING\n");
 			char objbuf[80], *ln;
 			ln = OBJ_nid2ln(OBJ_obj2nid(fld));
 			if(!ln) ln = "";
-			OBJ_obj2txt(objbuf, 80, fld, 1);
+			OBJ_obj2txt(objbuf, sizeof objbuf, fld, 1);
 			BIO_printf(out, "%*s%s:%s (%s)", indent, "", "OBJECT", ln, objbuf);
 		} else {
 			BIO_printf(out, "%*s%s:", indent, "", name);
--- a/crypto/bf/Makefile.ssl
+++ b/crypto/bf/Makefile.ssl
@@ -96,7 +96,7 @@ lint:
 	lint -DLINT $(INCLUDES) $(SRC)>fluff

 depend:
-	$(MAKEDEPEND) $(CFLAG) $(INCLUDES) $(DEPFLAG) $(PROGS) $(LIBSRC)
+	$(MAKEDEPEND) -- $(CFLAG) $(INCLUDES) $(DEPFLAG) -- $(PROGS) $(LIBSRC)

 dclean:
 	$(PERL) -pe 'if (/^# DO NOT DELETE THIS LINE/) {print; exit(0);}' $(MAKEFILE) >Makefile.new
--- a/crypto/bf/bftest.c
+++ b/crypto/bf/bftest.c
@@ -63,6 +63,8 @@
 #include <string.h>
 #include <stdlib.h>

+#include "../e_os.h"
+
 #ifdef OPENSSL_NO_BF
 int main(int argc, char *argv[])
 {
@@ -275,7 +277,7 @@ int main(int argc, char *argv[])
 	else
 		ret=test();

-	exit(ret);
+	EXIT(ret);
 	return(0);
 	}

@@ -454,9 +456,9 @@ static int test(void)
 	len=strlen(cbc_data)+1;

 	BF_set_key(&key,16,cbc_key);
-	memset(cbc_in,0,40);
-	memset(cbc_out,0,40);
-	memcpy(iv,cbc_iv,8);
+	memset(cbc_in,0,sizeof cbc_in);
+	memset(cbc_out,0,sizeof cbc_out);
+	memcpy(iv,cbc_iv,sizeof iv);
 	BF_cbc_encrypt((unsigned char *)cbc_data,cbc_out,len,
 		&key,iv,BF_ENCRYPT);
 	if (memcmp(cbc_out,cbc_ok,32) != 0)
--- a/crypto/bio/Makefile.ssl
+++ b/crypto/bio/Makefile.ssl
@@ -78,7 +78,7 @@ lint:
 	lint -DLINT $(INCLUDES) $(SRC)>fluff

 depend:
-	$(MAKEDEPEND) $(CFLAG) $(INCLUDES) $(DEPFLAG) $(PROGS) $(LIBSRC)
+	$(MAKEDEPEND) -- $(CFLAG) $(INCLUDES) $(DEPFLAG) -- $(PROGS) $(LIBSRC)

 dclean:
 	$(PERL) -pe 'if (/^# DO NOT DELETE THIS LINE/) {print; exit(0);}' $(MAKEFILE) >Makefile.new
--- a/crypto/bio/b_print.c
+++ b/crypto/bio/b_print.c
@@ -109,7 +109,7 @@
 * o ...                                       (for OpenSSL)
 */

-#if HAVE_LONG_DOUBLE
+#ifdef HAVE_LONG_DOUBLE
 #define LDOUBLE long double
 #else
 #define LDOUBLE double
@@ -483,7 +483,7 @@ fmtint(
 {
    int signvalue = 0;
    unsigned LLONG uvalue;
-    char convert[20];
+    char convert[DECIMAL_SIZE(value)+1];
    int place = 0;
    int spadlen = 0;
    int zpadlen = 0;
@@ -508,8 +508,8 @@ fmtint(
            (caps ? "0123456789ABCDEF" : "0123456789abcdef")
            [uvalue % (unsigned) base];
        uvalue = (uvalue / (unsigned) base);
-    } while (uvalue && (place < 20));
-    if (place == 20)
+    } while (uvalue && (place < sizeof convert));
+    if (place == sizeof convert)
        place--;
    convert[place] = 0;

@@ -641,8 +641,8 @@ fmtfp(
            (caps ? "0123456789ABCDEF"
              : "0123456789abcdef")[intpart % 10];
        intpart = (intpart / 10);
-    } while (intpart && (iplace < 20));
-    if (iplace == 20)
+    } while (intpart && (iplace < sizeof iplace));
+    if (iplace == sizeof iplace)
        iplace--;
    iconvert[iplace] = 0;

@@ -653,7 +653,7 @@ fmtfp(
              : "0123456789abcdef")[fracpart % 10];
        fracpart = (fracpart / 10);
    } while (fplace < max);
-    if (fplace == 20)
+    if (fplace == sizeof fplace)
        fplace--;
    fconvert[fplace] = 0;

--- a/Show More
+++ b/Show More