These warnings have no false positives and point to serious bugs.
(cherry picked from commit 99853cb8d4)
Conflicts:
configure
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* qatar/release/0.8:
update Changelog
fate: fetch samples that match the release series
dxva2: include dxva.h if found
iff: validate CMAP palette size
Changelog: document msrle bugfix
Changelog: cosmetics, remove trailing periods and sort
msrledec: check bounds before constructing a possibly invalid pointer,
Conflicts:
Changelog
configure
libavformat/iff.c
tests/Makefile
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '327ff82bac3081d918dceb4931c77e25d0a1480d':
msrle: convert MS RLE decoding function to bytestream2.
Update Changelog for the 0.8.6 Release
wmaprodec: require block_align to be set.
ivi_common: do not call MC for intra frames when dc_transform is unset
roqvideodec: fix a potential infinite loop in roqvideo_decode_frame().
Revert "libmp3lame: use the correct remaining buffer size when flushing"
lzo: fix overflow checking in copy_backptr()
flacdec: simplify bounds checking in flac_probe()
atrac3: avoid oversized shifting in decode_bytes()
avconv: skip attached files when selecting streams to read from.
lavf: fix arithmetic overflows in avformat_seek_file()
Conflicts:
Changelog
avconv.c
libavcodec/libmp3lame.c
libavcodec/msrledec.c
libavformat/utils.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'f82e127dd9c7c0d54bf6400f83c7825e571f9a9e':
parser: fix large overreads
dsputil: fix invalid array indexing
shorten: use the unsigned type where needed
shorten: report meaningful errors
shorten: K&R formatting cosmetics
shorten: set invalid channels count to 0
matroskadec: request a read buffer for the wav header
h264: check for luma and chroma bit depth being equal
vc1: Move init code shared between decoder and parser to common code file.
libmp3lame: use the correct remaining buffer size when flushing
xxan: fix invalid memory access in xan_decode_frame_type0()
wmadec: require block_align to be set.
Conflicts:
libavcodec/h264.c
libavcodec/libmp3lame.c
libavcodec/shorten.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '9b79a05289d91d1184455d12e6c4df457f0657c4':
wmaprodec: return an error, not 0, when the input is too small.
vmdaudio: fix invalid reads when packet size is not a multiple of chunk size
vorbisdec: Error on bark_map_size equal to 0.
configure: clean up Altivec detection
Update RELEASE file for 0.8.6
update year to 2013
oggdec: make sure the private parse data is cleaned up (cherry picked from commit d894f74762)
build: Fix CAF demuxer dependencies
doc: developer: Allow tabs in the vim configuration for Automake files
doc: filters: Correct BNF FILTER description
Conflicts:
RELEASE
cmdutils.c
libavcodec/vmdav.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '60a1ee6e419e244dc2363fdc4ddf8350d506f2ae':
doc: Fix some obsolete references to av* tools as ff* tools
Conflicts:
doc/indevs.texi
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Fixes decoding with picky media players.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
(cherry picked from commit b448c0a68d)
Conflicts:
libavformat/movenc.c
Many players ignore broken aac frames, so don't abort mov or flv
muxing when encountering one, just print a warning instead.
Fixes ticket #2380.
(cherry picked from commit 1741fece70)
Conflicts:
libavformat/flvenc.c
The idea is to ensure that 'make fate' always fetches the fate samples
that work with this release.
(cherry picked from commit a89f68776b2771935a348ce07d0a094ae965acfc)
Signed-off-by: Reinhard Tartler <siretart@tauware.de>
Apparently, some build environments require dxva.h even for dxva2,
while others lack this header entirely. Including it conditionally
allows building in both cases.
Signed-off-by: Martin Storsjö <martin@martin.st>
(cherry picked from commit fa84506177)
Signed-off-by: Reinhard Tartler <siretart@tauware.de>
Avoids an infinite loop in the calling programs with decoder not
consuming any input and not returning output.
CC:libav-stable@libav.org
(cherry picked from commit cacad1c058)
Signed-off-by: Reinhard Tartler <siretart@tauware.de>
(cherry picked from commit 20373a66ec)
Signed-off-by: Reinhard Tartler <siretart@tauware.de>
When there is just 1 byte remanining in the buffer, nothing will be read
and the loop will continue forever. Check that there are at least 8
bytes, which are always read at the beginning.
CC:libav-stable@libav.org
(cherry picked from commit 3e2f200237)
Signed-off-by: Reinhard Tartler <siretart@tauware.de>
(cherry picked from commit 747fbe0c21)
Conflicts:
libavcodec/roqvideodec.c
The check `src > dst' in the form `&c->out[-back] > c->out' invokes
pointer overflow, which is undefined behavior in C.
Remove the check. Also replace `&c->out[-back] < c->out_start' with
a safe form `c->out - c->out_start < back' to avoid overflow.
CC: libav-stable@libav.org
Signed-off-by: Xi Wang <xi.wang@gmail.com>
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
(cherry picked from commit ca6c3f2c53)
Conflicts:
libavutil/lzo.c
Simplify `p->buf > p->buf + p->buf_size - 4' as `p->buf_size < 4'.
Avoid a possible out-of-bounds pointer, which is undefined behavior
in C.
CC: libav-stable@libav.org
Signed-off-by: Xi Wang <xi.wang@gmail.com>
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
(cherry picked from commit 8425d693ee)
When `off' is 0, `0x537F6103 << 32' in the following expression invokes
undefined behavior, the result of which is not necessarily 0.
(0x537F6103 >> (off * 8)) | (0x537F6103 << (32 - (off * 8)))
Avoid oversized shifting.
CC: libav-stable@libav.org
Signed-off-by: Xi Wang <xi.wang@gmail.com>
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
(cherry picked from commit eba1ff3130)
Conflicts:
libavcodec/atrac3.c
The values compared here can be more than INT64_MAX apart. Since the
difference is always positive, converting to uint64_t before subtracting
gives the correct result without overflows.
Signed-off-by: Mans Rullgard <mans@mansr.com>
(cherry picked from commit 91ac403b13)
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
Indexing outside an array is invalid and causes errors with
gcc 4.8.
Signed-off-by: Mans Rullgard <mans@mansr.com>
(cherry picked from commit 0a07f2b346)
Signed-off-by: Diego Biurrun <diego@biurrun.de>
get_uint returns an unsigned value, use an unsigned to store
blocksize to make sure the comparison logic is correct and report
correctly the error for the channel count not supported.
CC: libav-stable@libav.org
(cherry picked from commit 5cf7c72757)
(cherry picked from commit 88089eecfd)
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
Conflicts:
libavcodec/shorten.c
Prevent the loop shorten_decode_close from writing and freeing out of
the array boundary.
Found-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
CC: libav-stable@libav.org
(cherry picked from commit c10da30d84)
(cherry picked from commit 21d568be17)
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
The decoder assumes a single bit depth for all the planes while
the specification allows different bit depths for luma and chroma.
Avoid the possible problems described in CVE-2013-2277
This fixes standalone compilation of the VC-1 parser.
(cherry picked from commit 3c715383ea)
Conflicts:
libavcodec/vc1data.h
Signed-off-by: Diego Biurrun <diego@biurrun.de>
Returning 0 may result in an infinite loop in valid calling programs. A
decoder should never return 0 without producing any output.
CC:libav-stable@libav.org
(cherry picked from commit 4c0080b7e7)
Signed-off-by: Reinhard Tartler <siretart@tauware.de>
(cherry picked from commit 60dd8b5733)
Signed-off-by: Reinhard Tartler <siretart@tauware.de>
The loop a few lines below the xan_unpack() call accesses up to
dec_size * 2 bytes into y_buffer, so dec_size must be limited to
buffer_size / 2.
CC:libav-stable@libav.org
(cherry picked from commit 8a49d2bcbe)
Signed-off-by: Reinhard Tartler <siretart@tauware.de>
(cherry picked from commit 62a657de16)
Signed-off-by: Reinhard Tartler <siretart@tauware.de>
Avoids an infinite loop in the calling programs with decoder not
consuming any input and not returning output.
CC:libav-stable@libav.org
(cherry picked from commit ea1136baaf)
Signed-off-by: Reinhard Tartler <siretart@tauware.de>
(cherry picked from commit c1f479e8df)
Signed-off-by: Reinhard Tartler <siretart@tauware.de>
There used to be one test for Altivec intrinsics support and a
separate test to determine which of two possible syntaxes to use
for vector literals. Since 2008, we only support the more common
of these so the split test no longer makes sense.
This combines the tests into one and also changes the hard error on
failure to a warning. The test can reasonably fail if no --cpu flag
is provided (or is provided with an unknown CPU) and the compiler
default target does not support Altivec. Aborting in this case is
probably over-reacting.
Fixes: #464, http://bugs.debian.org/701710
Signed-off-by: Mans Rullgard <mans@mansr.com>
(cherry picked from commit 20bcce507a)
Signed-off-by: Reinhard Tartler <siretart@tauware.de>
If the first "special" character in a filename is a comma,
it can introduce protocol options, but only if there is a
colon at the end. Otherwise, it is just a filename with a
comma.
Fix trac ticket #2303.
(cherry picked from commit d9fad53f4b)
While we do not use Automake in libav, this allows our config to be
used more globally without introducing unwanted breakage.
(cherry picked from commit 040c565e51)
Conflicts:
doc/developer.texi
The QuickTime specification does not contain any hint that the atom
must not be written in some cases and both the QuickTime and the
AVID decoders do not fail if the atom is present.
This change allows to signal (visually) interlaced streams with
a codec different from uncompressed video.
As a side-effect, this fixes ticket #2202
(cherry picked from commit 7d0e3b197c)
Conflicts:
libavformat/movenc.c
tests/ref/lavf/mov
tests/ref/seek/lavf_mov
tests/ref/vsynth/vsynth1-avui
tests/ref/vsynth/vsynth1-dnxhd-1080i
tests/ref/vsynth/vsynth1-mpeg4
tests/ref/vsynth/vsynth2-avui
tests/ref/vsynth/vsynth2-dnxhd-1080i
tests/ref/vsynth/vsynth2-mpeg4
* qatar/release/0.8:
pthread: set the frame properties from the thread context, not user.
mp3: exit on parsing error in mp_decode_frame
indeo3: initialise pixel planes on allocation
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Fixes vlc decoding for hypothetical files that would contain such cases.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
(cherry picked from commit 0dfc01c2bb)
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
(cherry picked from commit 5ff41ffeb4cb9ea6df49757dc859619dc3d3ab4f)
Conflicts:
libavcodec/huffyuv.c
(cherry picked from commit 9bc70fe1ae50fd2faa0b9429d47cfbda01a92ebc)
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Prevents out of array writes
Found-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
(cherry picked from commit f67a0d1152)
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
(cherry picked from commit 95ab8d33e1a680f30a5a9605175112008ab81afc)
Conflicts:
libavcodec/huffyuv.c
(cherry picked from commit 277def59fce10d91e3113e5c0f63e22bc4abfa88)
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
A negative `size' will bypass FFMIN(). In the subsequent memcpy() call,
`size' will be considered as a large positive value, leading to a buffer
overflow.
Change the type of `size' to unsigned int to avoid buffer overflow, and
simplify overflow checks accordingly.
Signed-off-by: Xi Wang <xi.wang@gmail.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
(cherry picked from commit 4e692374f7)
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Sanity checks like `data + size >= data_end || data + size < data' are
broken, because `data + size < data' assumes pointer overflow, which is
undefined behavior in C. Many compilers such as gcc/clang optimize such
checks away.
Use `size < 0 || size >= data_end - data' instead.
Signed-off-by: Xi Wang <xi.wang@gmail.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
(cherry picked from commit 902cfe2f74)
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
The check `start + res < start' is broken since pointer overflow is
undefined behavior in C. Many compilers such as gcc/clang optimize
away this check.
Use `res > end - start' instead. Also change `res' to unsigned int
to avoid signed left-shift overflow.
Signed-off-by: Xi Wang <xi.wang@gmail.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
(cherry picked from commit 2f014567cf)
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Right now, the frame properties are set from the user-facing
AVCodecContext before it is updated from the thread context, which is
wrong since they may be invalid or obsolete.
This reverts 312645e :
"Do not set codec_tag property for matroska muxers."
Also adds dummy codec_tag lists with codecs
supported in mkv but not in wav / avi.
Fixes ticket #2169.
(cherry picked from commit df39c3ce38)
Conflicts:
libavformat/matroskaenc.c
Properly forward mp_decode_layer3 errors, mp_decode_layer1 and
mp_decode_layer2 do not return errors.
Based on a patch by Michael Niedermayer.
(cherry picked from commit 0c03cc6838)
Signed-off-by: Anton Khirnov <anton@khirnov.net>
This prevents decoder from reading garbage from it in case of errors later.
(cherry picked from commit 81064a8045)
Fixes an invalid read on sample from CVE-2012-2804
Signed-off-by: Anton Khirnov <anton@khirnov.net>
* qatar/release/0.8:
Update Changelog
h264: check ref_count validity for num_ref_idx_active_override_flag
h264: check context state before decoding slice data partitions
oggdec: free the ogg streams on read_header failure
oggdec: check memory allocation
Fix uninitialized reads on malformed ogg files.
rtsp: Recheck the reordering queue if getting a new packet
opt: avoid segfault in av_opt_next() if the class does not have an option list
alacdec: do not be too strict about the extradata size
Conflicts:
Changelog
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'a335ffd7f4cdaaa6a8fe4187f6f06b0418eea19a':
h264: fix sps parsing for SVC and CAVLC 4:4:4 Intra profiles
h264: check sps.log2_max_frame_num for validity
h264: slice-mt: get last_pic_dropable from master context
ppc: always use pic for shared libraries
h264: error out on unset current_picture_ptr for h->current_slice > 0
flashsv: make sure data for zlib priming is available
h264: enable low delay only if no delayed frames were seen
flashsv: check for keyframe before using differential coding
lavf: avoid integer overflow in ff_compute_frame_duration()
aacdec: Fix an off-by-one overwrite when switching to LTP profile from MAIN.
APIchanges: Fill in missing commit hashes
Conflicts:
doc/APIchanges
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '01a4e7f623a2e6dc95862f9a56c777f058d7bfaf':
lavf: Bump minor version to distinguish branch and master version numbers
vp6: properly fail on unsupported feature
mp3: properly forward mp_decode_frame errors
mpeg12: do not decode extradata more than once.
indeo3: when freeing buffers, set pointers referencing them to NULL as well
indeo3: ensure that decoded cell data is in 7-bit range as presumed by decoder
avconv: fix copying per-stream metadata.
id3v2: fix reading unsynchronized frames.
h264: Fix parameters to ff_er_add_slice() call
build: fix 'clean' target
Conflicts:
avconv.c
libavcodec/mpeg12.h
libavformat/id3v2.c
libavformat/version.h
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'dcf8f259d107838ff3778343dcb762398130a1a3':
build: Add 'check' target to run all compile and test targets.
Ignore generated aviocat tool.
avconv: only apply presets when we have an encoder.
flacenc: ensure the order is within the min/max range in LPC order search
yuv4mpeg: reject unsupported codecs
vp8: reset loopfilter delta values at keyframes.
vp56: release frames on error
vp56: make parse_header return standard error codes
ivi_common: check that scan pattern is set before using it.
Prepare for 0.8.5 Release
x86: Require an assembler able to cope with AVX instructions
Conflicts:
RELEASE
avconv.c
doc/developer.texi
libavformat/yuv4mpeg.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
The ogg decoder wasn't padding the input buffer with the appropriate
FF_INPUT_BUFFER_PADDING_SIZE bytes. Which led to uninitialized reads in
various pieces of parsing code when they thought they had more data than
they actually did.
Signed-off-by: Dale Curtis <dalecurtis@chromium.org>
Signed-off-by: Ronald S. Bultje <rsbultje@gmail.com>
(cherry picked from commit ef0d779706)
Signed-off-by: Reinhard Tartler <siretart@tauware.de>
Fixes infinite or long taking loop in frame num gap code in
the fuzzed sample bipbop234.ts_s223302.
CC: libav-stable@libav.org
(cherry picked from commit d7d6efe42b)
Signed-off-by: Reinhard Tartler <siretart@tauware.de>
If we timed out and consumed a packet from the reordering queue,
but didn't return a packet to the caller, recheck the queue status.
Otherwise, we could end up in an infinite loop, trying to consume
a queued packet that has already been consumed.
CC: libav-stable@libav.org
Signed-off-by: Martin Storsjö <martin@martin.st>
(cherry picked from commit 8729698d50)
Signed-off-by: Reinhard Tartler <siretart@tauware.de>
Sometimes the extradata has duplicate atoms, but that shouldn't prevent
decoding. Just ensure that it is at least 36 bytes as a sanity check.
CC: libav-stable@libav.org
(cherry picked from commit 68a04b0cce)
Signed-off-by: Reinhard Tartler <siretart@tauware.de>
Dropping frames is undesirable but that is the only way by which the
decoder could return to low delay mode. Instead emit a warning and
continue with delayed frames.
Fixes a crash in fuzzed sample nasa-8s2.ts_s20033 caused by a larger
than expected has_b_frames value. Low delay keeps getting re-enabled
from a presumely broken SPS.
CC: libav-stable@libav.org
(cherry picked from commit 706acb558a)
Conflicts:
libavcodec/h264.c
Scaling the denominator instead of the numerator if it is too large
loses precision. Fixes an assert caused by a negative frame duration in
the fuzzed sample nasa-8s2.ts_s202310.
CC: libav-stable@libav.org
(cherry picked from commit 7709ce029a)
Signed-off-by: Reinhard Tartler <siretart@tauware.de>
Interlacing is not supported at all and mismanaged down the normal
codepaths causing possible buffer management issues.
Fixes: CVE-2012-2783
(cherry picked from commit be75fed975)
Signed-off-by: Reinhard Tartler <siretart@tauware.de>
The function can return either a parsing error or a memory management
error.
Fixes: CVE-2012-2797
(cherry picked from commit 9ab0874ea8)
Conflicts:
libavcodec/mpegaudiodec.c
Signed-off-by: Reinhard Tartler <siretart@tauware.de>
It is handled separately from other types because it uses stream
specifiers and currently that triggers an assert in SET_DICT.
(cherry picked from commit 4632abc7a3)
Conflicts:
avconv_opt.c
Signed-off-by: Reinhard Tartler <siretart@tauware.de>
Current code would incorrectly process e.g. 'ff 00 ff 00 ff' to
'ff ff ff', while it should be 'ff ff 00 ff'.
Fixes Bug 395.
CC: libav-stable@libav.org
(cherry picked from commit 9ae80e6a9c)
Signed-off-by: Reinhard Tartler <siretart@tauware.de>
s->mb_x is reset to zero a couple of lines above. It does not make
sense to call ff_er_add_slice() with 0 as endx when the end of the
macroblock row was reached. Fixes unnecessary and counterproductive
error resilience in https://bugzilla.libav.org/show_bug.cgi?id=394.
(cherry picked from commit e6160bda98)
Conflicts:
libavcodec/h264.c
Signed-off-by: Reinhard Tartler <siretart@tauware.de>
This fixes removal of TOOLS as well as HOSTPROGS declared in the
top-level Makefile. The clean target in common.mak needs to be
eval'd since the variables used within are reset for each library.
(cherry picked from commit 395c3feb3b)
Conflicts:
common.mak
library.mak
Signed-off-by: Diego Biurrun <diego@biurrun.de>
This fixes use of uninitialized values when the FLAC encoder uses the
2-level, 4-level, and 8-level search methods. Fixes failure of the
fate-flac-24-comp-8 test when run using valgrind.
(cherry picked from commit 3a2731cbd3)
Conflicts:
libavcodec/flacenc.c
Signed-off-by: Reinhard Tartler <siretart@tauware.de>
This is consistent with the other ff_ass_split_* functions.
It also fixes a crash when trying to split a dialog with text=NULL
(which seems to happen when the text of the dialog is empty); basically,
this commit fixes crashes when trying to encode an empty text subtitle
dialog (see subrip and mov_text encoders).
Fixes Ticket2048.
(cherry picked from commit c83002a4f8)
Some files simply contain invalid info tags.
Fixes unrelated bug posted into Ticket1821
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
(cherry picked from commit 09456d0df1)
All modern assemblers have this capability. Older NASM versions
that lack the capability produce code that crashes at runtime,
so it's better to error out during the build process instead.
CC: libav-stable@libav.org
(cherry picked from commit b8e8a07c6c)
Conflicts:
configure
Fixes division by 0
Fixes CID733736
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
(cherry picked from commit 670b927aa2)
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Fixes part of CID717913
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
(cherry picked from commit 8dc8994427)
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Fixes part of CID717913
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
(cherry picked from commit 4acfe3d193)
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
if 0.0 != 0.0 a out of array read would occur, equal checks
with floating point may behave in such odd ways, though
this is very unlikely in a real implementation of a compiler
Fixes: CID718936
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
(cherry picked from commit 54b2d317ed)
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
This makes no difference with the current #defines
Fixes CID732255
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
(cherry picked from commit 3a48e38ad0)
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Fixes null pointer dereference, fixes CID703729.
Signed-off-by: Paul B Mahol <onemda@gmail.com>
(cherry picked from commit 3d179edf6d)
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Fixes CID733728 & CID733729.
Signed-off-by: Paul B Mahol <onemda@gmail.com>
(cherry picked from commit 313b40efbd)
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'be209bdabb11c59de17220bdbf0bf9c9f7cc16f5':
vf_pad: don't give up its own reference to the output buffer.
libvorbis: use VBR by default, with default quality of 3
libvorbis: fix use of minrate/maxrate AVOptions
h264: fix deadlocks on incomplete reference frame decoding.
cmdutils: avoid setting data pointers to invalid values in alloc_buffer()
avidec: return 0, not packet size from read_packet().
wmapro: prevent division by zero when sample rate is unspecified
vc1dec: check that coded slice positions and interlacing match.
alsdec: fix number of decoded samples in first sub-block in BGMC mode.
alsdec: remove dead assignments
alsdec: Fix out of ltp_gain_values read.
alsdec: Check that quantized parcor coeffs are within range.
alsdec: Check k used for rice decoder.
Conflicts:
avconv.c
libavcodec/h264.c
libavcodec/libvorbis.c
libavformat/avidec.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '15c2e8027f4827018608badb1bff1294af1810e4':
wav: do not fail on empty INFO tags
cavsdec: check for changing w/h.
indeo4: update AVCodecContext width/height on size change
avidec: use actually read size instead of requested size
wmaprodec: check num_vec_coeffs for validity
lagarith: check count before writing zeros.
indeo3: fix out of cell write.
indeo5: check tile size in decode_mb_info().
indeo5: prevent null pointer dereference on broken files
indeo5dec: Make sure we have had a valid gop header.
indeo4/5: check empty tile size in decode_mb_info().
ivi_common: make ff_ivi_process_empty_tile() static.
Conflicts:
libavcodec/indeo5.c
libavformat/wav.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'c5ec1908597824e93bbe20137ac9662f84f3cb07':
indeo: check for invalid motion vectors
indeo: clear allocated band buffers
indeo: track tile macroblock size
factor out common decoding code for Indeo 4 and Indeo 5
indeo: check custom Huffman tables for errors
dfa: improve boundary checks in decode_dds1()
dfa: use more meaningful return codes
dfa: add some checks to ensure that decoder won't write past frame end
dfa: convert to bytestream2 API
dfa: check that the caller set width/height properly.
avsdec: Set dimensions instead of relying on the demuxer.
ac3dec: ensure get_buffer() gets a buffer for the correct number of channels
Conflicts:
libavcodec/avs.c
libavcodec/dfa.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Since it is declared as a string AVOption, the generic freeing code
attempts to free it on codec close. Some codecs might have already freed
it elsewhere (or didn't even allocate it with av_malloc() in the first
place), so this might lead to an invalid free.
There is no point in having this field accessible as an AVOption, so
remove it from the options table.
Fixes Bug 380.
CC: libav-stable@libav.org
(cherry picked from commit b691135d0c)
Conflicts:
libavcodec/options_table.h
The value should be always 3, as it follows from the specification.
Fix a stack buffer overflow in exponents_from_scale_factors as reported
by asan. Thanks to Dale Curtis for the sample vector.
(cherry picked from commit 97cfa55eea)
Signed-off-by: Reinhard Tartler <siretart@tauware.de>
When decode_nal_units() previously encountered a NAL_END_SEQUENCE,
and there are some junk bytes left in the input buffer, but no start codes,
buf_index gets stuck 3 bytes before the end of the buffer.
This can trigger an infinite loop in the caller code, eg. in
try_decode_trame(), as avcodec_decode_video() then keeps returning zeroes,
with 3 bytes of the input packet still available.
With this change, the remaining bytes are skipped so the whole packet gets
consumed.
CC:libav-stable@libav.org
Signed-off-by: Jindřich Makovička <makovick@gmail.com>
Signed-off-by: Anton Khirnov <anton@khirnov.net>
(cherry picked from commit 1a8c6917f6)
Conflicts:
libavcodec/h264.c
- enable the options for audio encoding
- properly check for user-set maxrate
- use correct calling order in vorbis_encode_setup_managed()
(cherry picked from commit 182d4f1f38)
Conflicts:
libavcodec/libvorbis.c
Fixes a part of Bug 277
Signed-off-by: Anton Khirnov <anton@khirnov.net>
If decoding a second complementary field, and the first was
decoded in our thread, mark decoding of that field as complete.
If decoding fails, mark the decoded field/frame as complete.
Do not allow switching between field modes or field/frame mode
between slices within the same field/frame. Ensure that two
subsequent fields cover top/bottom (rather than top/frame,
bottom/frame or such nonsense situations).
Fixes various deadlocks when decoding samples with errors in
reference frames.
Found-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
CC: libav-stable@libav.org
(cherry picked from commit 1e26a48fa2)
Fixes Bug 118
Conflicts:
libavcodec/h264.c
Signed-off-by: Anton Khirnov <anton@khirnov.net>
ALS spec:
11.6.3.1.1 Quantization and encoding of parcor coefficients
...
In all cases the resulting quantized values ak are restricted to the range [-64,63].
Found-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Signed-off-by: Justin Ruggles <justin.ruggles@gmail.com>
(cherry picked from commit 5b051ec3bd)
Signed-off-by: Reinhard Tartler <siretart@tauware.de>
* qatar/release/0.8: (23 commits)
snow: Check mallocs at init
vorbis: Validate that the floor 1 X values contain no duplicates.
vorbisenc: check all allocations for failure
indeo3: validate new frame size before resetting decoder
lavfi: avfilter_merge_formats: handle case where inputs are same
rv34: error out on size changes with frame threading
rv34: Handle only complete frames in frame-mt.
rv34: use AVERROR return values in ff_rv34_decode_frame()
vlc/rl: Add ff_ prefix to the nonstatic symbols
h263: Add ff_ prefix to nonstatic symbols
alsdec: check opt_order.
golomb: check remaining bits during unary decoding in get_ur_golomb_jpegls()
lavf: don't segfault when a NULL filename is passed to avformat_open_input()
mpegvideo: Don't use ff_mspel_motion() for vc1
imgconvert: avoid undefined left shift in avcodec_find_best_pix_fmt
eval: fix swapping of lt() and lte()
nuv: check RTjpeg header for validity
Revert "nuv: check per-frame header for validity."
bmpdec: only initialize palette for pal8.
sipr: fall back to setting mode based on bit_rate.
...
Conflicts:
avconv.c
libavcodec/dnxhddec.c
libavcodec/golomb.h
libavcodec/h263.h
libavcodec/imgconvert.c
libavcodec/mpegvideo_common.h
libavcodec/mpegvideo_enc.c
libavcodec/nuv.c
libavcodec/rv34.c
libavcodec/sipr.c
libavcodec/vorbisdec.c
libavcodec/vorbisenc.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Our decoder does not support changing w/h.
Fixes CVE-2012-2777 and CVE-2012-2784.
Found-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
Signed-off-by: Anton Khirnov <anton@khirnov.net>
(cherry picked from commit c20a696306)
Signed-off-by: Reinhard Tartler <siretart@tauware.de>
This prevents writing into a too small array if some parameters changed
without the tile being reallocated.
Fixes CVE-2012-2794
CC:libav-stable@libav.org
Found-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
Signed-off-by: Anton Khirnov <anton@khirnov.net>
(cherry picked from commit 2d09cdbaf2)
Signed-off-by: Reinhard Tartler <siretart@tauware.de>
This prevents writing into a too small array if some parameters changed
without the tile being reallocated.
Based on a patch by Michael Niedermayer <michaelni@gmx.at>
Fixes CVE-2012-2800
CC:libav-stable@libav.org
Found-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
(cherry picked from commit ae3da0ae55)
Signed-off-by: Reinhard Tartler <siretart@tauware.de>
The decode function assumes that the video will have those dimensions.
Fixes CVE-2012-2801
CC:libav-stable@libav.org
Found-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
Signed-off-by: Anton Khirnov <anton@khirnov.net>
(cherry picked from commit 85f477935c)
Signed-off-by: Reinhard Tartler <siretart@tauware.de>
If there is an error during frame parsing, but AVCodecContext.channels was
changed and AC3DecodeContext.out_channels was set previously, the two may not
match.
Fixes CVE-2012-2802
Found-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
CC: libav-stable@libav.org
(cherry picked from commit 56b6a43056)
Signed-off-by: Reinhard Tartler <siretart@tauware.de>
Duplicate values in this vector are explicitly banned by the Vorbis I spec
and cause divide-by-zero crashes later on.
(cherry picked from commit ecf79c4d3e)
Signed-off-by: Reinhard Tartler <siretart@tauware.de>
This fixes a double-free crash if lists are the same due to the two
merge_ref() calls at the end of the (useless) merging that happens.
Signed-off-by: Anton Khirnov <anton@khirnov.net>
(cherry picked from commit 11b6a82412)
Conflicts:
libavfilter/formats.c
Signed-off-by: Reinhard Tartler <siretart@tauware.de>
Correct handling of errors to prevent hags or crashes is very complex
otherwise.
The frame initializing is also moved from decode_slice() to
decode_frame() for clarity.
(cherry picked from commit 73ad4471a4)
Signed-off-by: Anton Khirnov <anton@khirnov.net>
Fixes out of array write in quant_cof.
Also make sure no invalid opt_order stays in the context.
Fixes CVE-2012-2775
Found-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Signed-off-by: Justin Ruggles <justin.ruggles@gmail.com>
(cherry picked from commit 9853e41aa0)
Signed-off-by: Anton Khirnov <anton@khirnov.net>
Fixes infinite loop in FLAC decoding in case of a truncated bitstream due to
the safe bitstream reader returning 0's at the end.
Fixes Bug 310.
CC:libav-stable@libav.org
(cherry picked from commit 4795362660)
Signed-off-by: Anton Khirnov <anton@khirnov.net>
This can easily happen when the caller is using a custom AVIOContext.
Behave as if the filename was an empty string in this case.
CC: libav-stable@libav.org
(cherry picked from commit a5db8e4a1a)
Signed-off-by: Anton Khirnov <anton@khirnov.net>
Using ff_mspel_motion assumes that s (a MpegEncContext
poiinter) really is a Wmv2Context.
This fixes crashes in error resilience on vc1/wmv3 videos.
CC: libav-stable@libav.org
Signed-off-by: Martin Storsjö <martin@martin.st>
(cherry picked from commit 18f2d5cb9c)
Signed-off-by: Anton Khirnov <anton@khirnov.net>
The check is bogus since the nuv frameheader is already skipped
and the (decompressed) RTjpeg header is checked.
This reverts commit f6afacdb3b.
CC: libav-stable@libav.org
(cherry picked from commit 110d015ad4)
Signed-off-by: Anton Khirnov <anton@khirnov.net>
Gray8 is not considered to be paletted, so this would cause an invalid
write.
Fixes bug 367.
CC: libav-stable@libav.org
(cherry picked from commit 8b78c2969a)
Signed-off-by: Anton Khirnov <anton@khirnov.net>
Not all applications (e.g. MPlayer) set block_align, and
when using a different demuxer it might not even be
easily available.
So fall back to selecting mode based on bit rate as before
if block_align has not useful value.
It can't be worse than failing to decode completely.
(cherry picked from commit 1d0d63052b)
CC: libav-stable@libav.org
Signed-off-by: Reinhard Tartler <siretart@tauware.de>
(cherry picked from commit c54e00610f)
Signed-off-by: Anton Khirnov <anton@khirnov.net>
Currently it always exits with an error when more than
one position is specified.
CC: libav-stable@libav.org
(cherry picked from commit 4c679750cb)
Signed-off-by: Anton Khirnov <anton@khirnov.net>
pthread_wait_cond can wake up for no reason (Wikipedia: Spurious_wakeup).
The FF_THREAD_SLICE thread mechanism could spontaneously execute jobs or
allow the caller of avctx->execute to return before all jobs were complete.
This adds tests to both cases to ensure the wakeup is real.
Signed-off-by: Ben Jackson <ben@ben.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
(cherry picked from commit e3329474a3)
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
(cherry picked from commit f1ec792ae3)
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Folder and file names weren't being separated with a slash.
This resulted in .dll.a, .lib and .def files not being removed on uninstall.
Signed-off-by: Alexander Strasser <eclipse7@gmx.net>
(cherry picked from commit 49440853d0)
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Apparently, some build environments require dxva.h even for dxva2,
while others lack this header entirely. Including it conditionally
allows building in both cases.
Signed-off-by: Martin Storsjö <martin@martin.st>
(cherry picked from commit fa84506177)
Conflicts:
configure
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
The index must take into account the pre-roll time and must seek backwards,
not forwards.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
(cherry picked from commit bd603494f9)
Conflicts:
tests/ref/lavf/asf
tests/ref/seek/lavf_asf
Fixes Ticket1563
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
parse_forced_keyframes() relies in encoder timebase being set, so call
it from transcode_init() after it is known.
Conflicts:
avconv.c
(cherry picked from commit 19ad567311)
Signed-off-by: Anton Khirnov <anton@khirnov.net>
This is required for correct cropping of files from Canon
cameras.
Signed-off-by: Mans Rullgard <mans@mansr.com>
(cherry picked from commit 8aa93e9004)
Signed-off-by: Reinhard Tartler <siretart@tauware.de>
Override the frame size from the SPS with AVCodecContext values
if the latter specify a size smaller by less than one macroblock.
This is required for correct cropping of MOV files from Canon cameras.
Signed-off-by: Mans Rullgard <mans@mansr.com>
(cherry picked from commit 30f515091c)
Conflicts:
libavcodec/h264.c
Fixes part of Ticket1373
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
(cherry picked from commit debbcfae60)
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Fixes part of Ticket1369
Found-by: ami_stuff
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
(cherry picked from commit 3c276ac0f8)
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
prevents out of array read
Found-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
(cherry picked from commit 8aaa00c301)
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Found-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
(cherry picked from commit fd4c1c0b70)
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Such files are currently not supported as the table is used at several points
Found-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
(cherry picked from commit e7cb161515)
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Found-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
(cherry picked from commit 1b8741a684)
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* qatar/release/0.8:
Update Changelog for the 0.8.3 Release
Prepare for 0.8.3 Release
ea: check chunk_size for validity.
png: check bit depth for PAL8/Y400A pixel formats.
qdm2: clip array indices returned by qdm2_get_vlc().
tqi: Pass errors from the MB decoder
h264: Add check for invalid chroma_format_idc
h263dec: Disallow width/height changing with frame threads.
Conflicts:
Changelog
RELEASE
libavcodec/eatqi.c
libavcodec/h264_ps.c
libavcodec/pngdec.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Wrong bit depth can lead to invalid rowsize values, which crashes the
decoder further down.
Found-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
CC: libav-stable@libav.org
(cherry picked from commit d2205d6543)
Signed-off-by: Reinhard Tartler <siretart@tauware.de>
Prevents subsequent overreads when these numbers are used as indices
in arrays.
Found-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
CC: libav-stable@libav.org
Signed-off-by: Justin Ruggles <justin.ruggles@gmail.com>
(cherry picked from commit 64953f67f9)
Signed-off-by: Derek Buitenhuis <derek.buitenhuis@gmail.com>
Conflicts:
libavcodec/qdm2.c
Fixes a crash when FF_DEBUG_PICT_INFO is used.
Signed-off-by: Ronald S. Bultje <rsbultje@gmail.com>
(cherry picked from commit 6ef4063957)
Fixes: CVE-2012-0851
Signed-off-by: Reinhard Tartler <siretart@tauware.de>
The cleanup is only done now when
a picture is returned (assuming that it has to be done when its returned)
a error is returned (assuming that there will be no further progress on the frame)
the codec is not h264 (this is still needed due to some deadlocks in realvideo)
This fixes a decoding regression with 00017.MTS
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
(cherry picked from commit 18a7f7465e)
Fixes out of array read
Found-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
(cherry picked from commit ec3cd74f2d)
Fixes out of array writes.
Found-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
(cherry picked from commit 5a35bd92ad)
Fixes over reading the header array
Found-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
(cherry picked from commit 474e31c904)
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* qatar/release/0.8:
Update Changelog for the 0.8.2 Release
Prepare for 0.8.2 Release
vqavideo: return error if image size is not a multiple of block size
celp filters: Do not read earlier than the start of the 'out' vector.
motionpixels: Clip YUV values after applying a gradient.
jpeg: handle progressive in second field of interlaced.
h263: more strictly forbid frame size changes with frame-mt.
h264: additional protection against unsupported size/bitdepth changes.
tta: prevents overflows for 32bit integers in header.
ttadec: CRC checking
tta: use skip_bits_long()
Conflicts:
Changelog
RELEASE
libavcodec/h264.c
libavcodec/tta.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
The decoder assumes in various places that the image size
is a multiple of the block size, and there is no obvious
way to support odd sizes. Bailing out early if the header
specifies a bad size avoids various errors later on.
Fixes CVE-2012-0947.
Signed-off-by: Mans Rullgard <mans@mansr.com>
(cherry picked from commit 58b2e0f0f2)
Signed-off-by: Reinhard Tartler <siretart@tauware.de>
Progressive data is allocated later in decode_sof(), not allocating
that data leads to NULL dereferences.
Found-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
CC: libav-stable@libav.org
(cherry picked from commit 5eec5a79da)
Signed-off-by: Reinhard Tartler <siretart@tauware.de>
Prevents crashes because the old check was incomplete.
Found-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
CC: libav-stable@libav.org
(cherry picked from commit 2d22d4307d)
Signed-off-by: Reinhard Tartler <siretart@tauware.de>
Fixes crashes in codepaths not covered by original checks.
Found-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
(cherry picked from commit 732f9fcfe5)
Conflicts:
libavcodec/h264.c
Signed-off-by: Reinhard Tartler <siretart@tauware.de>
This prevents sample_rate/data_length from going negative, which
caused various crashes and undefined behaviour further down.
Found-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
CC: libav-stable@libav.org
(cherry picked from commit ac80b812cd)
Signed-off-by: Reinhard Tartler <siretart@tauware.de>
* qatar/release/0.8: (24 commits)
apedec: check bits <= 32.
truemotion: forbid invalid VLC bitsizes and token values.
mov: don't overwrite existing indexes.
truemotion2: handle out-of-frame motion vectors through edge extension.
lzw: prevent buffer overreads.
truemotion2: convert packet header reading to bytestream2.
lagarith: fix buffer overreads.
raw: forward avpicture_fill() error code in raw_decode().
vc1: Do not read from array if index is invalid.
utvideo: port header reading to bytestream2.
bytestream: add more unchecked variants for bytestream2 API
bytestream: K&R formatting cosmetics
bytestream: Add bytestream2 writing API.
aac: Reset PS parameters on header decode failure.
mov: Do not read past the end of the ctts_data table.
xwma: Validate channels and bits_per_coded_sample.
asf: reset side data elements on packet copy.
vqa: check palette chunk size before reading data.
vqavideo: port to bytestream2 API
wmavoice: fix stack overread.
...
Conflicts:
cmdutils.c
cmdutils.h
libavcodec/lagarith.c
libavcodec/truemotion2.c
libavcodec/vqavideo.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
SHOW_UBITS() is only defined up to n_bits is 25, therefore forbid
values larger than this in get_vlc2() (max_bits). tokens[][] can be
used as an index in deltas[], which has a size of 64, so ensure the
values are smaller than that.
This prevents crashes on corrupt bitstreams.
Found-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
CC: libav-stable@libav.org
(cherry picked from commit b7b1509d06)
Signed-off-by: Reinhard Tartler <siretart@tauware.de>
Also use correct buffer sizes in calls to tm2_read_stream(). Together,
this prevents overreads.
Found-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
CC: libav-stable@libav.org
(cherry picked from commit bd508d435b)
Signed-off-by: Reinhard Tartler <siretart@tauware.de>
If the next header frame codes zero envelopes the previous frame's
values will be used. Consequently the invalid values must be cleared.
Found-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
CC: libav-stable@libav.org
(cherry picked from commit a237b38021)
Signed-off-by: Reinhard Tartler <siretart@tauware.de>
This prevents a SIGFPE later on.
Found-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
CC: libav-stable@libav.org
(cherry picked from commit 5023b89bba)
Signed-off-by: Reinhard Tartler <siretart@tauware.de>
Fixes an AAC decoding issue with the sample from ticket #213 on machines
with SSE but without SSE2.
Based on 89411a by Reimar.
(cherry picked from commit f6b7863808)
Found-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
(cherry picked from commit 0065080320)
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
This fixes some arith decoder overreads and a potential infinite loop.
Found-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
(cherry picked from commit 0f13cc732b)
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Found-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
(cherry picked from commit 5cd8afee99)
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Found-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
Reviewed-by: Paul B Mahol <onemda@gmail.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
(cherry picked from commit 9729f140ae)
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
This bug might have been exploitable (out of HEAP buffer writes)
Bug introduced by libav
commit a55d5bdc6e
Date: Tue Mar 6 15:15:42 2012 -0800
algmm: convert to bytestream2 API.
(cherry picked from commit c2e3b564b3)
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Forgot to add the equivalent amount to the incoming sample pointer as the output pointer.
Signed-off-by: Anton Khirnov <anton@khirnov.net>
(cherry picked from commit 2e626dd513)
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
10l: Forgot to adjust deinterleave for new location of incoming samples in 7946a5a.
This produced incorrect, but surprisingly listenable results.
Thanks to Justin Ruggles for the report.
Signed-off-by: Anton Khirnov <anton@khirnov.net>
(cherry picked from commit dc7e7d4dd9)
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Interlaced images can have 32 references (16 per field), so limiting the
array size to 16 leads to invalid writes.
Found-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
CC: libav-stable@libav.org
(cherry picked from commit 48cbe4b092)
Signed-off-by: Reinhard Tartler <siretart@tauware.de>
Progressive images can have only 16 references, error out if there are
more, since the data is almost certainly corrupt, and the invalid value
will lead to random crashes or invalid writes later on.
Found-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
CC: libav-stable@libav.org
(cherry picked from commit e0febda22d)
Signed-off-by: Reinhard Tartler <siretart@tauware.de>
Protects against overreads in the input buffer.
Found-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
CC: libav-stable@libav.org
(cherry picked from commit 4c25269ced)
Signed-off-by: Reinhard Tartler <siretart@tauware.de>
x264 always opens the file itself with fopen, so we cannot use the
standard lavc stats mechanism.
CC: libav-stable@libav.org
(cherry picked from commit d533e395e1)
Signed-off-by: Reinhard Tartler <siretart@tauware.de>
This reverts commit 729ebb2f18.
There was an off-by-one error in the bit mask calculation clearing
actually the last valid bit and causing
http://bugzilla.libav.org/show_bug.cgi?id=227
The broken sample (Mr_MrsSmith-h264_aac.mp4) the commit was fixing
does not work after correcting the off-by-one error.
CC: libav-stable@libav.org
(cherry picked from commit 8a6037c390)
Signed-off-by: Reinhard Tartler <siretart@tauware.de>
MPC8 allows indices of mpc_CC up to -1, and mpc_SCF up to -6, thus pad
the tables by that much on the left end.
Found-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
CC: libav-stable@libav.org
(cherry picked from commit d7eabd5042)
Signed-off-by: Reinhard Tartler <siretart@tauware.de>
We slightly overread the input buffer, so we require
padding at the end of the buffer, as is documented in the
get_bits API. Without padding, we'll read uninitialized
data or beyond the end of the .rodata, which may crash.
Found-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
CC: libav-stable@libav.org
(cherry picked from commit 4ffe5e2aa5)
Signed-off-by: Reinhard Tartler <siretart@tauware.de>
The codec would keep returning the last decoded frame if the stream
contains B-frames, since it wouldn't clear that frame from the list of
frames to be returned to the user.
Found-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
CC: libav-stable@libav.org
(cherry picked from commit 83f15a1228)
Conflicts:
libavcodec/cavsdec.c
Signed-off-by: Reinhard Tartler <siretart@tauware.de>
This way, it protects against overreads for 4bpp/2bpp content also.
Found-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
CC: libav-stable@libav.org
(cherry picked from commit cc5dd632ce)
Signed-off-by: Reinhard Tartler <siretart@tauware.de>
Results of IDCT can by far outreach the range of ff_cropTbl[], leading
to overreads and potentially crashes.
Found-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
CC: libav-stable@libav.org
(cherry picked from commit c23acbaed4)
Signed-off-by: Reinhard Tartler <siretart@tauware.de>
Factors all context dynamic memory handling to its own functions.
Fixes bug 220.
(cherry picked from commit 2bd730010d)
Signed-off-by: Reinhard Tartler <siretart@tauware.de>
That way all mix levels as exported by avpriv_ac3_parse_header()
will have the same meaning.
Previously the 3-bit center mix level for E-AC-3 was used to index in a
4-entry table, leading to out-of-array reads.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Signed-off-by: Justin Ruggles <justin.ruggles@gmail.com>
Signed-off-by: Alex Converse <alex.converse@gmail.com>
(cherry picked from commit e6d9fa66f1)
Found with asan.
Found-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
Signed-off-by: Alex Converse <alex.converse@gmail.com>
(cherry picked from commit 2d1c0dea5f)
dv: Fix null pointer dereference due to ach=0
Fixes part2 of CVE-2011-3929
Found-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
Reviewed-by: Roman Shaposhnik <roman@shaposhnik.org>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Signed-off-by: Alex Converse <alex.converse@gmail.com>
(cherry picked from commit 5a396bb3a6)
dv: check stype
Fixes part1 of CVE-2011-3929
Possibly fixes part of CVE-2011-3936
Found-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
Reviewed-by: Roman Shaposhnik <roman@shaposhnik.org>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Signed-off-by: Alex Converse <alex.converse@gmail.com>
(cherry picked from commit 635bcfccd4)
In some cases, what is left to read from ptr is smaller than EXTRABYTES.
Based on a patch by Thierry Foucu <tfoucu@gmail.com>.
Signed-off-by: Alex Converse <alex.converse@gmail.com>
(cherry picked from commit f372ce119b)
There are many places where we read an unchecked 4-bit index into it.
Found-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
(cherry picked from commit dfa37fe8a3)
Related to CVE-2011-3940.
Found-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
(cherry picked from commit c898431ca5)
Conflicts:
libavformat/nsvdec.c
Check results for av_malloc() and fix an overflow in one call.
Related to CVE-2011-3940.
Based in part on work from Michael Niedermayer.
Found-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
(cherry picked from commit 8fd8a48263)
Fixes CVE-2011-3940 (Out of bounds read resulting in out of bounds write)
Found-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
(cherry picked from commit 5c011706bc)
Signed-off-by: Alex Converse <alex.converse@gmail.com>
(cherry picked from commit 6a89b41d97)
This fixes clipping if the encoder input used the full 16 bit
input range (samples with a magnitude below 16383 worked fine).
The filtered subband samples should be 15 bit maximum, while
the code earlier produced them scaled to 16 bit.
This makes the decoder output have double the magnitude
compared to before.
The spec reference samples doesn't test the QMF at all, which
was why this part slipped past initially.
(cherry picked from commit b087ce2bee)
Signed-off-by: Martin Storsjö <martin@martin.st>
We need to do unsigned saturation in order to cover the corner case when the
absolute coefficient value is 16777215 (the maximum value).
Fixes Bug #216
(cherry picked from commit d483bb58c3)
Signed-off-by: Reinhard Tartler <siretart@tauware.de>
This prevents us from reading before the start of the buffer, and thus
prevents crashes resulting from this behaviour. Fixes bug 237.
(cherry picked from commit 291c9b6285)
Signed-off-by: Reinhard Tartler <siretart@tauware.de>
We need to set ms_stereo in encode_init() in order to avoid incorrectly
encoding the first frame as non-m/s while flagging it as m/s. Fixes an
uncomfortable pop in the left channel at the start of playback.
CC:libav-stable@libav.org
(cherry picked from commit 51ddf35c90)
Signed-off-by: Reinhard Tartler <siretart@tauware.de>
ff_wma_init() allows up to 50kHz, but this generates an exponent band
size table that requires 65 bands. The code assumes 25 bands in many
places, and using sample rates higher than 48kHz will lead to buffer
overwrites.
CC:libav-stable@libav.org
(cherry picked from commit 1ec075cfec)
Signed-off-by: Reinhard Tartler <siretart@tauware.de>
This is near the theoretical limit for wma frame size and is the most that
our decoder can handle. Allowing higher bit rates will just end up padding
each frame with empty bytes.
Fixes invalid writes for avconv when using very high bit rates.
CC:libav-stable@libav.org
(cherry picked from commit c2b8dea182)
Signed-off-by: Reinhard Tartler <siretart@tauware.de>
The maximum theoretical frame size is around 17000 bytes. Although in
practice it will generally be much smaller, we require a larger buffer
just to be safe.
CC: libav-stable@libav.org
(cherry picked from commit dfc4fdedf8)
Signed-off-by: Reinhard Tartler <siretart@tauware.de>
This allows it to be used with get_bits without the thread of overreads.
Found-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
CC: libav-stable@libav.org
(cherry picked from commit 1aa708988a)
Signed-off-by: Reinhard Tartler <siretart@tauware.de>
Prevents warnings because the dst and src overlap (are the same) in the
memcpy() inside the function.
Found-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
CC: libav-stable@libav.org
(cherry picked from commit 9d87374ec0)
Signed-off-by: Reinhard Tartler <siretart@tauware.de>
Prevents using the invalid mode as an index in a static array, which
would generate invalid reads.
Found-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
CC: libav-stable@libav.org
(cherry picked from commit 154b8bb800)
Signed-off-by: Reinhard Tartler <siretart@tauware.de>
Useful to return instead of -1 when the cause of the error is unknown,
typically from an external library.
(cherry picked from commit c9bca80132)
Conflicts:
doc/APIchanges
libavutil/avutil.h
Signed-off-by: Reinhard Tartler <siretart@tauware.de>
Fixes invalid reads while initializing the dequant tables, which uses
the bit depth to determine the QP table size.
Found-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
CC: libav-stable@libav.org
(cherry picked from commit 0ce4fe482c)
Signed-off-by: Reinhard Tartler <siretart@tauware.de>
Seeking back on EOF will reset the EOF flag, causing us to re-enter
the loop to find the next marker in the ASF file, thus potentially
causing an infinite loop.
Found-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
CC: libav-stable@libav.org
(cherry picked from commit bb6d5411e1)
Signed-off-by: Reinhard Tartler <siretart@tauware.de>
They cause various issues further down in demuxing.
Found-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
CC: libav-stable@libav.org
(cherry picked from commit 6e57a02b9f)
Signed-off-by: Reinhard Tartler <siretart@tauware.de>
The functions are already av_ prefixed and intfloat header is already provided.
Install libavutil/intfloat.h
Signed-off-by: Paul B Mahol <onemda@gmail.com>
Signed-off-by: Anton Khirnov <anton@khirnov.net>
(cherry picked from commit 8b933129b9)
Conflicts:
doc/APIchanges
Signed-off-by: Anton Khirnov <anton@khirnov.net>
Based in part by a fix from Michael Niedermayer <michaelni@gmx.at>
Fixes CVE-2011-3947
Found-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
(cherry picked from commit b57d262412)
Signed-off-by: Reinhard Tartler <siretart@tauware.de>
Splits at borders of cells are invalid, since it leaves one of the
cells with a width/height of zero. Also, propagate errors on buffer
allocation failures, so we don't continue decoding (which crashes).
Found-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
CC: libav-stable@libav.org
(cherry picked from commit fc9bc08dca)
Signed-off-by: Reinhard Tartler <siretart@tauware.de>
Because in contrast to the decoder, the parser does not setup low_delay.
The code in parse_nal_units would always end up setting has_b_frames
to "1", except when stream is explicitly marked as low delay.
Since the parser itself would create 'extradata', simply reopening
the parser would cause this.
This happens for instance in estimate_timings_from_pts(), which causes the
parser to be reopened on the same stream.
This fixes Libav #22 and FFmpeg (trac) #360
CC: libav-stable@libav.org
Based on a patch by Reimar Döffinger <Reimar.Doeffinger@gmx.de>
(commit 31ac0ac29b)
Comments and description adapted by Reinhard Tartler.
Signed-off-by: Reinhard Tartler <siretart@tauware.de>
(cherry picked from commit 790a367d9e)
Signed-off-by: Reinhard Tartler <siretart@tauware.de>
Specifically, prevent jumping back in the file for the next index, since
this can lead to infinite loops where we jump between indexes referring
to each other, and don't read indexes that don't fit in the file.
Found-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
CC: libav-stable@libav.org
(cherry picked from commit aac07a7a4c)
Signed-off-by: Reinhard Tartler <siretart@tauware.de>
Prevents crash when trying to copy from a non-existing plane in e.g.
a RGB32 reference image to a YUV420P target image
Found-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
CC: libav-stable@libav.org
(cherry picked from commit 830f70442a)
Signed-off-by: Anton Khirnov <anton@khirnov.net>
Also fixes crashes on corrupt bitstreams.
Found-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
CC: libav-stable@libav.org
(cherry picked from commit 33cd32b389)
Signed-off-by: Anton Khirnov <anton@khirnov.net>
This prevents crashes when trying to read beyond the end of the buffer
while decoding frame data.
Found-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
CC: libav-stable@libav.org
(cherry picked from commit be129271ea)
Signed-off-by: Anton Khirnov <anton@khirnov.net>
Prevents crashers when using the packet if allocation failed.
Found-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
CC: libav-stable@libav.org
(cherry picked from commit 31632e73f4)
Signed-off-by: Anton Khirnov <anton@khirnov.net>
This prevents crashers and errors further down when reading nodes in the
empty tree.
Found-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
CC: libav-stable@libav.org
(cherry picked from commit 2b83e8b700)
Signed-off-by: Anton Khirnov <anton@khirnov.net>
We read sub_packet_h / 2 packets per line of data (during deinterleaving),
which equals zero if sub_packet_h <= 1, thus causing us to not read any
data, leading to an infinite loop.
Found-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
CC: libav-stable@libav.org
(cherry picked from commit e30b3e59a4)
Signed-off-by: Anton Khirnov <anton@khirnov.net>
The AVOptions based default to threads auto in 2473a45c8
works only if avplay does not use custom option handling
for -threads.
CC: <libav-stable@libav.org>
(cherry picked from commit e48a70e6da)
Signed-off-by: Anton Khirnov <anton@khirnov.net>
The parser uses VLC tables initialized in vc1_common_init(), therefore
we should call this function on parser init also.
Found-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
CC: libav-stable@libav.org
(cherry picked from commit c742ab4e81)
Conflicts:
libavcodec/vc1.h
Signed-off-by: Anton Khirnov <anton@khirnov.net>
Return 0 means "please return the same data again", i.e. it causes an
infinite loop. Instead, return an error.
Found-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
CC: libav-stable@libav.org
(cherry picked from commit 9d3050d3e9)
Signed-off-by: Anton Khirnov <anton@khirnov.net>
Return 0 indicates "please return the same data again", i.e. it causes
an infinite loop. Instead, return that we consumed the buffer if we
finished decoding succesfully, or return an error if an error occurred.
Found-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
CC: libav-stable@libav.org
(cherry picked from commit 74699ac8c8)
Signed-off-by: Anton Khirnov <anton@khirnov.net>
This prevents failed assertions further down in the packet processing
where we require non-negative values for packet_size_left.
Found-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
CC: libav-stable@libav.org
(cherry picked from commit 41afac7f7a)
Signed-off-by: Anton Khirnov <anton@khirnov.net>
This prevents SIGFPEs when using block_align for divisions.
Found-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
CC: libav-stable@libav.org
(cherry picked from commit 32a659c758)
Signed-off-by: Anton Khirnov <anton@khirnov.net>
If bufsize < headersize, init_get_bits() will be called with a negative
number, causing it to fail and any subsequent call to get_bits() will
crash because it reads from a NULL pointer.
Found-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
CC: libav-stable@libav.org
(cherry picked from commit 3e13005cac)
Signed-off-by: Anton Khirnov <anton@khirnov.net>
On EOF, get_bits() will continuously return 0, causing an infinite
loop.
Found-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
CC: libav-stable@libav.org
(cherry picked from commit 84c202cc37)
Signed-off-by: Anton Khirnov <anton@khirnov.net>
At very small dimensions, this calculation could lead to zero-sized
filters, which leads to uninitialized output, zero-sized allocations,
loop overflows in SIMD that uses do{..}while(i++<filtersize); instead
of for(i=0;i<filtersize;i++){..} and several other similar failures.
Therefore, require a minimum filtersize of 1.
Found-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
CC: libav-stable@libav.org
(cherry picked from commit dae2ce361a)
Signed-off-by: Anton Khirnov <anton@khirnov.net>
Prevents a division by zero later on.
Found-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
CC: libav-stable@libav.org
(cherry picked from commit 7416d61036)
Signed-off-by: Anton Khirnov <anton@khirnov.net>
If no data was seen for a stream decoder are returning 0 when fed with
empty packets for flushing. We can stop flushing when the decoder does
not return delayed delayed frames anymore. Changes try_decode_frame()
return value to got_picture or negative error.
CC: libav-stable@libav.org
(cherry picked from commit b3461c29c1)
Signed-off-by: Anton Khirnov <anton@khirnov.net>
This prevents certain tags with a default value assigned to them (as per
the EBML syntax elements) from ever being assigned a NULL value. Other
parts of the code rely on these being non-NULL (i.e. they don't check for
NULL before e.g. using the string in strcmp() or similar), and thus in
effect this prevents crashes when reading of such specific tags fails,
either because of low memory or because of targeted file corruption.
Found-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
CC: libav-stable@libav.org
(cherry picked from commit cd40c31ee9)
Signed-off-by: Anton Khirnov <anton@khirnov.net>
The MDCT buffers in the decoder are only sized for up to 11 bits. The
reverse engineered documentation for WMA1/2 headers say that that for
all samplerates above 32kHz 11 bits are used. 12 and 13 bit support
were added for WMAPro. I was unable to make any Microsoft tools generate
a test file at a samplerate above 48kHz.
Discovered by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
CC: libav-stable@libav.org
(cherry picked from commit d78bb1a4b2)
Signed-off-by: Anton Khirnov <anton@khirnov.net>
Fixes invalid free() if any of the buffers are not allocated due to either
not decoding a header or an error prior to allocating all buffers.
Fixes CVE-2012-0858
CC: libav-stable@libav.org
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Signed-off-by: Justin Ruggles <justin.ruggles@gmail.com>
(cherry picked from commit 204cb29b3c)
Signed-off-by: Reinhard Tartler <siretart@tauware.de>
Conversion of the luma intra prediction mode to one of the constrained
("alzheimer") ones can happen by crafting special bitstreams, causing
a crash because we'll call a NULL function pointer for 16x16 block intra
prediction, since constrained intra prediction functions are only
implemented for chroma (8x8 blocks).
Found-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
CC: libav-stable@libav.org
(cherry picked from commit 45b7bd7c53)
Signed-off-by: Reinhard Tartler <siretart@tauware.de>
Earlier, calling avcodec_encode_audio worked fine even if time_base
wasn't set. Now it crashes due to trying to scale the output pts to
the codec context time base. This affects e.g. VLC.
If no time_base is set for audio codecs, set it to the sample
rate.
CC: libav-stable@libav.org
Signed-off-by: Martin Storsjö <martin@martin.st>
(cherry picked from commit 9a7dc618c5)
Signed-off-by: Reinhard Tartler <siretart@tauware.de>
This way, if the AVCodecContext is allocated for a specific codec, the
caller doesn't need to store this codec separately and then pass it
again to avcodec_open2().
It also allows to set codec private options using av_opt_set_* before
opening the codec.
(cherry picked from commit bc90199848)
Signed-off-by: Reinhard Tartler <siretart@tauware.de>
It allows to check whether an AVCodecContext is open in a documented
way. Right now the undocumented way this check is done in lavf/lavc is
by checking whether AVCodecContext.codec is NULL. However it's desirable
to be able to set AVCodecContext.codec before avcodec_open2().
(cherry picked from commit af08d9aeea)
Conflicts:
doc/APIchanges
Since we are clipping before we shift the values to
16 or 32 bits, we should not shift the min/max clip
values to compensate.
Fixes 8 and 24 bit lossy decoding.
Fixes ticket #871.
Signed-off-by: Derek Buitenhuis <derek.buitenhuis@gmail.com>
Signed-off-by: Anton Khirnov <anton@khirnov.net>
(cherry picked from commit 480b133e6f)
This reverts e6e7bfc1 and 365e1ec2.
The code may be incorrect both before and after the revert, but we
do not have any samples that were fixed by the original commits.
Fixes ticket #871.
(cherry picked from commit a915618a29)
we dont carry the whole git history in releases so theres no
point in having this in them either.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Fixes not yet fixed parts of CVE-2011-3946.
Found-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* qatar/master: (22 commits)
wma: Clip WMA1 and WMA2 frame length to 11 bits.
movenc: Don't require frame_size to be set for modes other than mov
doc: Update APIchanges with info on muxer flushing
movenc: Reindent a block
tools: Remove some unnecessary #undefs.
rv20: prevent calling ff_h263_decode_mba() with unset height/width
tools: K&R reformatting cosmetics
Ignore generated aviocat and ismindex tools.
build: Automatically include architecture-specific library Makefile snippets.
indeo5: prevent null pointer dereference on broken files
pktdumper: Use usleep instead of sleep
cosmetics: Remove some unnecessary block braces.
Drop unnecessary prefix from *sink* variable and struct names.
Add a tool for creating smooth streaming manifests
movdec: Calculate an average bit rate for fragmented streams, too
movenc: Write the sample rate instead of time scale in the stsd atom
movenc: Add a separate ismv/isma (smooth streaming) muxer
movenc: Allow the caller to decide on fragmentation
libavformat: Add a flag for muxers that support write_packet(NULL) for flushing
movenc: Add support for writing fragmented mov files
...
Conflicts:
Changelog
cmdutils.c
cmdutils.h
doc/APIchanges
ffmpeg.c
ffplay.c
libavfilter/Makefile
libavformat/Makefile
libavformat/avformat.h
libavformat/movenc.c
libavformat/movenc.h
libavformat/version.h
tools/graph2dot.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
The MDCT buffers in the decoder are only sized for up to 11 bits. The
reverse engineered documentation for WMA1/2 headers say that that for
all samplerates above 32kHz 11 bits are used. 12 and 13 bit support
were added for WMAPro. I was unable to make any Microsoft tools generate
a test file at a samplerate above 48kHz.
Discovered by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
CC: libav-stable@libav.org
The field frame_size isn't written to the output anywhere except
than in mov.
This facilitates stream copy from formats that don't set frame_size.
Signed-off-by: Martin Storsjö <martin@martin.st>
Also add some space around operators and wrap a comment
that extends past the 80 char "limit"/guideline.
Signed-off-by: Martin Storsjö <martin@martin.st>
This fixes a double release of the current frame on deinit.
Fixes CVE-2011-3934
Found-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
The index of the motion vector has to be checked before being
multiplied by 2 for the array index.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Fixes part2 of CVE-2011-3929
Found-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
Reviewed-by: Roman Shaposhnik <roman@shaposhnik.org>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Fixes part1 of CVE-2011-3929
Possibly fixes part of CVE-2011-3936
Found-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
Reviewed-by: Roman Shaposhnik <roman@shaposhnik.org>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
MinGW doesn't have sleep, only _sleep (which is deprecated),
Sleep (which is defined in winbase.h and not in the standard
C headers) and usleep.
Signed-off-by: Martin Storsjö <martin@martin.st>
It can also optionally split the file into individual fragments,
which allows it to be served from any web server without any
server side support.
Signed-off-by: Martin Storsjö <martin@martin.st>
This fixes calculation of trackDuration if the MOVIentry array
is cleared. This is required by the fragmentation support in the
next patch.
Signed-off-by: Martin Storsjö <martin@martin.st>
This commit makes the check specific to the case that needs it.
Regression was introduced by
commit 62adc60b97
Author: Michael Niedermayer <michaelni@gmx.at>
Date: Fri Dec 16 06:13:04 2011 +0100
avidec: Check that the header chunks fit in the available filesize.
Fixes Ticket771
Bug found by: Diana Elena Muscalu
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Fixes CVE-2011-3940 (Out of bounds read resulting in out of bounds write)
Found-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* qatar/master: (23 commits)
aacenc: Fix identification padding when the bitstream is already aligned.
aacenc: Write correct length for long identification strings.
aud: remove unneeded field, audio_stream_index from context
aud: fix time stamp calculation for ADPCM IMA WS
aud: simplify header parsing
aud: set pts_wrap_bits to 64.
cosmetics: indentation
aud: support Westwood SND1 audio in AUD files.
adpcm_ima_ws: fix stereo decoding
avcodec: add a new codec_id for CRYO APC IMA ADPCM.
vqa: remove unused context fields, audio_samplerate and audio_bits
vqa: clean up audio header parsing
vqa: set time base to frame rate as coded in the header.
vqa: set packet duration.
vqa: use 1/sample_rate as the audio stream time base
vqa: set stream start_time to 0.
lavc: postpone the removal of AVCodecContext.request_channels.
lavf: postpone removing av_close_input_file().
lavc: postpone removing old audio encoding and decoding API
avplay: remove the -er option.
...
Conflicts:
Changelog
libavcodec/version.h
libavdevice/v4l.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Although it has been deprecated for a long time, its intended
replacement (request_channel_layout) is not actually used anywhere, so
request_channels is currently the only way to access that functionality.
Allows our users to still build against a libpostproc with the old
API/ABI. Distributions can use this option to defer the soname bump.
Signed-off-by: Alexander Strasser <eclipse7@gmx.net>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Previously this was just checked in case of slice threads,
but frame threads do not support this either currently.
Making them support this is of course the long term goal
Fixes bug155
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* qatar/master:
Remove ffmpeg.
aacenc: Simplify windowing
aacenc: Move saved overlap samples to the beginning of the same buffer as incoming samples.
aacenc: Deinterleave input samples before processing.
aacenc: Store channel count in AACEncContext.
aacenc: Move Q^3/4 calculation to it's own table
aacenc: Request normalized float samples instead of converting s16 samples to float.
aacpsy: Replace an if with FFMAX in LAME windowing.
aacenc: cosmetics, replace 'rd' with 'bits' in codebook_trellis_rate to make it more clear what is being calculated.
aacpsy: cosmetics, change a FIXME to a NOTE about subshort comparisons
aacenc: cosmetics: move init() and end() to the bottom of the file.
aacenc: aac_encode_init() cleanup
XWD encoder and decoder
vc1: don't read the interpfrm and bfraction elements for interlaced frames
mxfdec: fix memleak on mxf_read_close()
westwood: split the AUD and VQA demuxers into separate files.
Conflicts:
.gitignore
Changelog
Makefile
configure
doc/ffmpeg.texi
ffmpeg.c
libavcodec/Makefile
libavcodec/aacenc.c
libavcodec/allcodecs.c
libavcodec/avcodec.h
libavcodec/version.h
libavformat/Makefile
libavformat/img2.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
This reduces the delay when opening the video with quicktime.
Idea-by: Maksym Veremeyenko <verem@m1stereo.tv>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
The previous implementation assumed that a new picture would always
supersede the previous picture. Similarly, presentation segments
were assumed to pertain to the most-recently-read picture.
However, each presentation segment may refer to 0 or more pictures
by their ID. Picture IDs may repeat, and a repeated picture ID
indicates that the old picture for that ID is no longer needed
and may be discarded.
The new implementation allocates a buffer with one slot for each
possible picture ID (the picture ID is a 16-bit field) and
properly decodes presentation segments so that all relevant
pictures are output upon encountering a display segment.
Given that most PGS streams are unlikely to use more than a small
fraction of the available picture IDs, it would probably be better
to use a more memory-efficient data structure. I'm lazy though, so
I leave this to a more motivated individual.
I've tested the code with MKV files in VLC (a recent revision from
their git repo) and with HandBrake (a version that I hacked up to
use ffmpeg's PGS subtitle decoder).
Review-by: Hendrik Leppkes <h.leppkes@gmail.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
This fixes memory corruption when seeking in broken streams.
a random mpeg4 in nut file was used to debug.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
This matches the spec as well as the reference decoder, and fixes a bug
with interlaced frame decoding.
Signed-off-by: Kostya Shishkov <kostya.shishkov@gmail.com>
* qatar/master: (25 commits)
riff: fix invalid av_freep() calls on EOF in ff_read_riff_info
pam: Fix a typo that broke writing and reading PAM files.
mxfdec: fix memleak on av_realloc failures
mxfdec: Do not parse slices or DeltaEntryArrays.
mxfdec: hybrid demuxing/seeking solution
mxfdec: Add Avid's essence element key.
mfxdec: Separate mxf_essence_container_uls for audio and video.
mxfdec: Compute packet offsets properly.
mxfdec: Use MaterialPackage - Track - TrackID instead of the system_item hack.
mxfdec: use av_dlog() for 'no corresponding source package found'
mxfdec: Make mxf->partitions sorted by offset.
mxfdec: parse ThisPartition
mxfdec: Speed up metadata and index parsing.
mxfdec: Make sure DataDefinition is consistent between material track and source track.
mxfdec: add EssenceContainer UL found in 0001GL00.MXF.A1.mxf_opatom.mxf
mxfdec: Add hack that adjusts the n_delta calculation when system items are present.
mxfdec: Parse IndexTableSegments and convert them into AVIndexEntry arrays.
mxfdec: Move FooterPartition to MXFContext and make sure it is never zero.
mxfdec: check return value of avio_seek
mxfdec: skip to end of structural sets
...
Conflicts:
configure
libavcodec/pnm.c
libavformat/mxfdec.c
libavformat/riff.c
libavformat/rtsp.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
This was a regression that came in when I switched to using the
h.264 annex b filter all the time. As the filter modifies extradata,
its use violates the statelessness assumption that exists in the
'ffmpeg' command line tool, and maybe elsewhere. It assumes that
a docoder can be reinitalised and pointed to an existing stream and
get the same results.
For now, the only way to meet this requirement is to backup the
extradata.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Makes it possible to select the name/path of the tool for compiling
the non-inline assembly code.
Signed-off-by: Alexander Strasser <eclipse7@gmx.net>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
This uses the old demuxing code for OP1a and separate demuxing code for OPAtom.
Timestamp output is added to the old demuxing code.
The seeking code is made to seek to the start of the desired EditUnit only,
from which the normal demuxing code takes over (if OP1a). This means we
do not use delta entries or slices, only StreamOffsets. OPAtom seeking
basically works like before.
This also makes D-10 seeking behave the same way as OP1a and OPAtom. In other
words, we allow seeking before the start or past the end for D-10 too.
Based on several patches by Tomas Härdin <tomas.hardin@codemill.se> and
Reimar Döffinger <Reimar.Doeffinger@gmx.de>.
Changed av_calloc to av_mallocz, added overflow checks.
It is a really bad idea to assign a video codec id
when we have set codec_type to audio and vice versa.
Prevents detection of mp2 in mxf as mpeg2video.
Signed-off-by: Janne Grunau <janne-libav@jannau.net>
Specifically, this means parsing as before until we run into essence.
At that point we seek to the footer and parse until EOF. After that we start
seeking backward to the previous partition and parse that until we run into
essence or the next partition. This procedure is repeated until we encounter
the last partition we parsed in the forward direction.
The end result of all this is that large essence containers are not needlessly
parsed. This speeds up parsing large files a lot.
Signed-off-by: Janne Grunau <janne-libav@jannau.net>
This fixes 0001GL.MXF.V1.mxf_opatom.mxf and 0001GL00.MXF.A1.mxf_opatom.mxf
getting two streams each due to both using the same SourcePackageID.
Signed-off-by: Janne Grunau <janne-libav@jannau.net>
This fixes reading of partition packs. The code stops reading after the
operational pattern and should skip the array of essence container
labels that follow.
Signed-off-by: Janne Grunau <janne-libav@jannau.net>
Now that 0.8 is out we can reapply this commit. It breaks shared
avserver builds due to avserver using internal libavformat symbols,
which are now hidden, so this commit also disables avserver with
--enable-shared.
the written length was off by 2 causing aac decoders to fail with the data.
lucky the encoder was marked as experimental and not used much
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Some applications use the j2c extension for jpeg2000 codestream files.
Signed-off-by: Jean First <jeanfirst@gmail.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
This avoids (for all practical cases) the issue of reusing
the same UDP port as for an earlier connection. If the remote
doesn't know the previous session was closed, he might keep
on sending packets to that port. If we always start off trying
to open the same UDP port, we might get those packets intermixed
with the new ones.
This is occasionally an issue when testing RTSP stuff with
DSS, perhaps also with other servers.
Signed-off-by: Martin Storsjö <martin@martin.st>
This check isn't relevant in the way the code currently works.
Also change a case of if (x == 0) into if (!x).
Signed-off-by: Martin Storsjö <martin@martin.st>
Original commit:
commit 2473a45c85
Author: Janne Grunau <janne-libav@jannau.net>
Date: Wed Jan 18 10:53:41 2012 +0100
threads: change the default for threads back to 1
Using threaded decoding by default breaks backward compatibility if
AVHWAccel is used or if an appliction sets threadunsafe callbacks.
Avconv and avplay still use -threads auto if not specified.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* qatar/master:
rtpdec: Use our own SSRC in the SDES field when sending RRs
Finalize changelog for 0.8 Release
Prepare for 0.8 Release
threads: change the default for threads back to 1
threads: update slice_count and slice_offset from user context
aviocat: Remove useless includes
doc/APIChanges: fill in missing dates and hashes
Revert "avserver: fix build after the next bump."
mpegaudiodec: switch error detection check to AV_EF_BUFFER
lavf: rename fer option and document resulting (f_)err_detect options
lavc: rename err_filter option to err_detect and document it
mpegvideo: fix invalid memory access for small video dimensions
movenc: Reorder entries in the MOVIentry struct, for tigheter packing
rtsp: Remove extern declarations for variables that don't exist
aviocat: Flush the output before closing
Conflicts:
Changelog
RELEASE
libavcodec/mpegaudiodec.c
libavcodec/pthread.c
libavformat/options.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
The s->ssrc field is the sender's SSRC, we use ssrc + 1 to get
a collision free "unique" SSRC for ourselves in the RR part.
The SDES block in the RTCP packet should describe ourselves,
not the sender.
This was fixed for the RR part in 952139a322, but wasn't
fixed for the SDES part until now.
This could cause some Axis cameras to send RTCP BYE packets
to us due to the SSRC collision.
Signed-off-by: Martin Storsjö <martin@martin.st>
Using threaded decoding by default breaks backward compatibility if
AVHWAccel is used or if an appliction sets threadunsafe callbacks.
Avconv and avplay still use -threads auto if not specified.
This temporarily (until 0.8 is released) reverts commit
8e1340abc3. That commit breaks shared
builds because of symbol hiding. Reverting it will enable shared builds
for 0.8
When either video dimension is only one macroblock, subtractions
based on v_edge_pos and the macroblock size may be negative. In
that situation, an unsigned comparison isn't sufficent to test for
MV overruns, because a limit of (unsigned)-1 will let any other
value pass.
Signed-off-by: Anton Khirnov <anton@khirnov.net>
That way all mix levels as exported by the parser
will have the same meaning.
Previously the 3bit center mix level for eac3 was
used to index in a 4 entry table leading to out of array reads.
this change removes the table and offsets the ac3 variable by 4
so it matches the meanings for eac3 except the reserved case.
The reserved case is then explicitly handled.
Idea-by: Justin Ruggles <justin.ruggles@gmail.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Sometimes the scan finds nothing that qualifies for addition to
the array and pos is zero after the loops. The code forces pos to
1 and the array is then processed as if it had one valid element in it,
producing some amusing but not very useful results.
I don't see the rationale for this. If pos is zero coming out of the
loops, the only appropriate thing to do is set t->angle to zero. The
attached patch does that. It's worked properly in several tests so far.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
As the test is run during fate and the benchmark is useless for fate
this very slightly speeds up fate. Its also consistent with the other
tests.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* qatar/master:
Add a tool that uses avio to read and write, doing a plain copy of data
ARM: fix build with FFT enabled and MDCT disabled
lavf: force single-threaded decoding in avformat_find_stream_info
avidec: migrate last of lavf from FF_ER_* to AV_EF_*
avserver: fix build after the next bump.
Conflicts:
libavformat/Makefile
libavformat/avidec.c
libavformat/utils.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Originally, sizeof(struct MOVIentry) was 48, after the reordering,
it is 40 in my build configuration.
When writing really long mov/mp4 files, this can make a difference
- this saves a bit over 2 MB of memory per hour of video (down to
10.3 MB per hour from 12.3 MB per hour initially) for a video with
75 packets per second - 25 fps + 50 audio packets (which is the
case for AMR audio).
Signed-off-by: Martin Storsjö <martin@martin.st>
The H.264 decoder needs SPS and PPS for initialization during
multi-threaded decoding. When probed single-threaded SPS and PPS are
copied to extradata and are available for proper initialization of
the decoder before the first frame is decoded.
* qatar/master:
mpeg12: check for available bits to avoid an infinite loop
fate: add some shorthands to run groups of tests
fate: Give some tests more sensible names.
cosmetics: Rename ffsink to avsink.
Conflicts:
avconv.c
cmdutils.c
cmdutils.h
ffmpeg.c
ffplay.c
tests/fate/audio.mak
tests/fate/demux.mak
tests/fate/dpcm.mak
tests/fate/image.mak
tests/fate/lossless-audio.mak
tests/fate/lossless-video.mak
tests/fate/microsoft.mak
tests/fate/pcm.mak
tests/fate/real.mak
tests/fate/screen.mak
tests/fate/video.mak
tests/fate/voice.mak
tests/fate/wma.mak
Merged-by: Michael Niedermayer <michaelni@gmx.at>
This one was missed in the previous fraps fix, the
allocation is exactly the same in both cases.
Fixes fraps-v5 under valgrind.
Signed-off-by: Reimar Döffinger <Reimar.Doeffinger@gmx.de>
The ABI differences are negligible, but its easier for all if
all distros have libpostproc HEAD under the same soname and
debian bumped soname without consulting upstream, so as silly as
it is following this is probably the least pain for all.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
This is needed in case the get_buffer() callback doesnt set
width/height.
Ideally all decoders would make calls through some wraper
to the callbacks and that wraper would call ff_init_buffer_info()
But until thats done, the default reget buffer must call this
itself as it needs the values for the changed size check later.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* qatar/master:
tta: cast output data pointer to the correct type
avconv: fix -frames for video encoders with delay.
Merged-by: Michael Niedermayer <michaelni@gmx.at>
There is no guarantee that the casted double which is assigned to the
variable will be contained in an int (also if it is almost sure for most
non-alien architectures).
Use long long int to contain such values instead of an int, which is
required to contain at least 64 bits, so it is guaranteed to contain also
int64_t values, which are used by some fields.
In particular, should fix trac ticket #921.
This fixes parallel FATE (make fate -j4) failing under valgrind with:
Syscall param ioctl(TCSET{S,SW,SF}) points to uninitialised byte(s)
at 0x5D98B23: tcsetattr (tcsetattr.c:88)
by 0x43D66C: term_init (ffmpeg.c:734)
by 0x43CD8D: main (ffmpeg.c:5071)
Address 0x7fefffdd0 is on thread 1's stack
Uninitialised value was created by a stack allocation
at 0x43D5B0: term_init (ffmpeg.c:716)
Signed-off-by: Reimar Döffinger <Reimar.Doeffinger@gmx.de>
The same as av_fast_malloc but uses av_mallocz and keeps extra
always-0 padding.
This does not mean the memory will be 0-initialized after each call,
but actually only after each growth of the buffer.
However this makes sure that
a) all data anywhere in the buffer is always initialized
b) the padding is always 0
c) the user does not have to bother with adding the padding themselves
Fixes another valgrind warning about use of uninitialized data,
this time with fate-vsynth1-jpegls.
Signed-off-by: Reimar Döffinger <Reimar.Doeffinger@gmx.de>
This combination is quite odd and almost certainly a bug if
it happens.
Reviewed-by: Justin Ruggles <justin.ruggles@gmail.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
The tool is useful for testing the internal arithmetic evaluation engine
(indeed I plan to use it in FATE), and provides a handy calculator when
you can't rely on bc ;-).
They allow to implement the if/then/else logic, which cannot be
implemented otherwise.
For example the expression:
A*B + not(A)*C
always evaluates to NaN if B is NaN, even in the case where A is 0.
* qatar/master:
rv34: add NEON rv34_idct_add
rv34: 1-pass inter MB reconstruction
add SMJPEG muxer
avformat: split out common SMJPEG code
pictordec: Use bytestream2 functions
avconv: use avcodec_encode_audio2()
pcmenc: use AVCodec.encode2()
avcodec: bump minor version and add APIChanges for the new audio encoding API
avcodec: Add avcodec_encode_audio2() as replacement for avcodec_encode_audio()
avcodec: add a public function, avcodec_fill_audio_frame().
rv34: Intra 16x16 handling
rv34: Inter/intra MB code split
Conflicts:
Changelog
libavcodec/avcodec.h
libavcodec/pictordec.c
libavcodec/utils.c
libavcodec/version.h
libavcodec/x86/rv34dsp.asm
libavformat/version.h
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Overall almost 4% faster, idct_add down from 350 to 85 cycles, idct_dc_add
down from 83 to 30 cycles.
squash: rv34 idct rearrange partial register loads
This reworks the frame skipping code such that the reference
buffers are still updated according to the header.
However it also ensures that the current frame will not end
up in any reference buffer.
Also fixes a hang with frame-multithreading, probably because
get_buffer was already called and would have reset the progress,
however the frame could remain in framep due to the missing update
(or it could be assigned to next_framep and a skip_frame skip would
then write it into framep - there might be even more failure modes).
Sample might become available at samples/nsv/vp8.nsv
Signed-off-by: Reimar Döffinger <Reimar.Doeffinger@gmx.de>
Enhances seeking by demuxing until the requested timestamp is reached within
the segment selected by the seek code using the playlist info.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
This is required by the spec and fixes video-1frag.ogg.48.ogg. (FPE)
Based on the debuging work of Oana Stratulat and ubitux.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
mov: cosmetics - move a line to a better position and add a comment
Oana Andreea Stratulat submitted a similar patch to trac, but forgot
to notify the ML about it.
Signed-off-by: Jean First <jeanfirst@gmail.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
This allows audio encoders to optionally take an AVFrame as input and write
encoded output to an AVPacket.
This also adds AVCodec.encode2() which will also be usable by video and
subtitle encoders once support is implemented in the public functions.
* qatar/master:
fate: split ADPCM and DPCM test references into separate files.
mov, mxfdec: Employ more meaningful return values.
lavc: Relax API strictness in avcodec_decode_audio3 with a custom get_buffer()
wavpack: fix clipping for 32-bit lossy mode
vb: Use bytestream2 functions
Conflicts:
libavcodec/utils.c
libavcodec/vb.c
libavformat/mxfdec.c
tests/fate/dpcm.mak
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Extract processing of intra 16x16 blocks from intra macroblock
processing.
Also implement a function performing inverse transform and block
reconstruction for DC-only blocks in 1 pass instead of 2.
Split inter/intra macroblock handling code. This will allow further
optimizations such as performing inverse transform and block reconstruction
in a single pass as well as specialize code.
Signed-off-by: Janne Grunau <janne-libav@jannau.net>
Do not fail audio decoding with avcodec_decode_audio3 if user has set a
custom get_buffer. Strictly speaking, this was never allowed by the API,
but it seems that some software packages did so anyways. In order to
unbreak applications (cf. http://bugs.debian.org/655890), this change
clarifies the API and overrides the custom get_buffer() with the defaults.
This change is inspired by a similar
commit (c3846e3eba) in FFmpeg.
Signed-off-by: Reinhard Tartler <siretart@tauware.de>
Current code would just return uninitialized data with no way
to detect this condition.
Instead, fill the whole GUID with 0 in that case.
Fixes valgrind uninitialized data errors in fate-seek-lavf_asf.
Signed-off-by: Reimar Döffinger <Reimar.Doeffinger@gmx.de>
Reference decoder clips data before shifting it to final range and also
forces 32-bit lossy mode to be actually 24-bit lossy mode in order to be
able to perform proper clipping.
This is not a real error and memsetting always even when the
size did not change is overkill, but it still should be
an acceptable trade-off.
Signed-off-by: Reimar Döffinger <Reimar.Doeffinger@gmx.de>
* qatar/master:
sgidec: Use bytestream2 functions to prevent buffer overreads.
cosmetics: Move static and inline attributes to more standard places.
configure: provide libavfilter/version.h header to get_version()
swscale: change yuv2yuvX code to use cpuflag().
libx264: Don't leave max_b_frames as -1 if the user didn't set it
FATE: convert output to rgba for the targa tests which currently output pal8
fate: add missing reference files for targa tests in 9c2f9b0e2
FATE: enable the 2 remaining targa conformance suite tests
targa: add support for rgb555 palette
FATE: fix targa tests on big-endian systems
Conflicts:
libavcodec/sgidec.c
libavcodec/targa.c
libswscale/x86/output.asm
tests/fate/image.mak
Merged-by: Michael Niedermayer <michaelni@gmx.at>
At the very least this should fix warnings about unused static
functions if one or more of these is not defined.
However even compilation might be broken if the compiler does
not optimize the function away completely.
This actually happens in case of the AVX function, since the
function pointer is used in an assignment that is not under
an #if and thus probably only optimized away after the function
was already marked as used.
Signed-off-by: Reimar Döffinger <Reimar.Doeffinger@gmx.de>
We do this for all other codec_tag checks in mpegvideo*/h26*
doing it here too makes the code more consistent.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
While we correctly "register" the side data when we split it,
the application (in this case FFmpeg) might not update the
AVPacket pool it uses to finally free the packet, thus
causing a leak.
This also makes the av_dup_packet unnecessary which could
cause an even worse leak in this situation.
Also change the code to not modify the user-provide AVPacket at all.
Signed-off-by: Reimar Döffinger <Reimar.Doeffinger@gmx.de>
* cus/stable:
ffplay: silence buffer size must be a multiple of frame size
ffplay: use swr_set_compensation for audio synchronization
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* qatar/master:
FATE: add tests for targa
ARM: fix Thumb-mode simple_idct_arm
ARM: 4-byte align start of all asm functions
rgb2rgb: rgb12to15()
swscale-test: fix stack overread.
swscale: fix invalid conversions and memory problems.
cabac: split cabac.h into declarations and function definitions
cabac: Mark ff_h264_mps_state array as static, it is only used within cabac.c.
cabac: Remove ff_h264_lps_state array.
Conflicts:
libswscale/rgb2rgb.h
libswscale/swscale_unscaled.c
tests/fate/image.mak
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Some of these encoders may produce invalid bitstreams, which should not
be done without the user knowing.
Some of these decoders may be unfinished and may contain security issues.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
max_b_frames is initialized to -1 for libx264, to allow
distinguishing between an explicit user set 0 and a default not
touched 0 (see bb73cda2).
If max_b_frames is left as -1, this affects dts generation (where
expressions like max_b_frames != 0 are used), so make sure it is
left at the default 0 after the libx264 init function returns.
This avoids unnecessarily producing dts != pts when using
profile=baseline.
Signed-off-by: Martin Storsjö <martin@martin.st>
The alignment directive must obviously precede the label.
This was never noticed in ARM mode since the location is
already aligned there.
Signed-off-by: Mans Rullgard <mans@mansr.com>
Due to apprent bugs in the GNU assembler and/or linker, relocations
can be incorrectly processed if the alignment of a Thumb instruction
is changed in the output file compared to the input object.
This fixes crashes in h264 decoding with Thumb enabled. No effect in
ARM mode since everything is 4-byte aligned there.
Signed-off-by: Mans Rullgard <mans@mansr.com>
This fixes a segmentation fault when doing a transcoding and a stream
copy of the same input stream at the same time, e.g.:
ffmpeg -i in.mkv -c:v mpeg2video transcode.m2v -c copy copy.ts
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
With the added benefit that allowing -segment_list_size 0 makes it
possible to keep all segment entries in the list file.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Fixes problems where rgbToRgbWrapper() is called even though it doesn't
support this particular conversion (e.g. converting from RGB444 to
anything). Thirdly, fixes issues where rgbToRgbWrapper() is called for
non-native endiannness conversions (e.g. RGB555BE on a LE system).
Fourthly, fixes crashes when converting from e.g. monowhite to
monowhite, which calls planarCopyWrapper() and overwrites/reads because
n_bytes != n_pixels.
* qatar/master: (21 commits)
utils: Check for extradata size overflows.
ARM: rv34: fix asm syntax in dc transform functions
avio: Fix the value of the deprecated URL_FLAG_NONBLOCK
rv34: fix and optimise frame dependency checking
rv34: NEON optimised dc only inverse transform
avprobe: use avio_size() instead of deprecated AVFormatContext.file_size.
ffmenc: remove references to deprecated AVFormatContext.timestamp.
lavf: undeprecate read_seek().
avserver: remove code using deprecated CODEC_CAP_PARSE_ONLY.
lavc: replace some remaining FF_I_TYPE with AV_PICTURE_TYPE_I
lavc: ifdef out parse_only AVOption
nellymoserdec: SAMPLE_FMT -> AV_SAMPLE_FMT
mpegvideo_enc: ifdef out/replace references to deprecated codec flags.
riff: remove references to sonic codec ids
indeo4: add some missing static and const qualifiers
rv34: DC-only inverse transform
avconv: use AVFrame.width/height/format instead of corresponding AVCodecContext fields
lavfi: move version macros to a new installed header version.h
vsrc_buffer: release the buffer on uninit.
rgb2rgb: rgb12tobgr12()
...
Conflicts:
avconv.c
doc/APIchanges
ffprobe.c
libavfilter/Makefile
libavfilter/avfilter.h
libswscale/rgb2rgb.c
libswscale/rgb2rgb.h
Merged-by: Michael Niedermayer <michaelni@gmx.at>
This fixes standalone compilation of some decoders with --disable-optimizations.
cabac.h defines some inline functions that use symbols from cabac.c. Without
optimizations these inline functions are not eliminated and linking fails with
references to non-existing symbols.
Splitting the inline functions off into their own header and only #including
it in the places where the inline functions are used allows #including cabac.h
from anywhere without ill effects.
This isn't used in practice anywhere within libav at the moment,
but change it for consistency until it is removed.
URL_RDONLY/WRONLY were fixed in commit 5b81e29593 (after the
values that actually were used were changed at the major bump,
in commit cbea3ac8), but this flag was unintentionally left unfixed.
Signed-off-by: Martin Storsjö <martin@martin.st>
Using the double variant causes several pointless conversions between
double and int.
Worse, one of the conversions is in an inner loop together with a
function using MMX, resulting in undefined behaviour.
Based on debugging by Ray Simard.
Signed-off-by: Reimar Döffinger <Reimar.Doeffinger@gmx.de>
Tested-by: Ray Simard <rhs.ffmpeg@sylvan-glade.com>
The sporadic threading errors during fate-rv30 were caused by calling
ff_thread_await_progress with mb row -1 as argument. That returns
immediately since progress is initialized to -1. Not yet computed
motion vectors from the reference could be used for the first
macroblocks.
This fixes dithering for rgb555le, it appears gcc had moved the
setup of the variables after the asm or something like that.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
av_destruct_packet() always frees the packet data even when the demuxer
is going to re-use it, thus causing crashes when decoding audio
frames (as implemented in a pending patch).
av_free_packet() is used instead, as it allows each demuxer to set the
right packet data releasing mechanism through the pkt->destruct callback.
When decoding coefficients, detect whether the block is DC-only, and take
advantage of this knowledge to perform DC-only inverse transform.
This is achieved by:
- first, changing the 108x4 element modulo_three_table into a 108 element
table (kind of base4), and accessing each value using mask and shifts.
- then, checking low bits for 0 (as they represent the presence of higher
frequency coefficients)
Also provide x86 SIMD code for the DC-only inverse transform.
Signed-off-by: Kostya Shishkov <kostya.shishkov@gmail.com>
* qatar/master:
fft: init functions with INIT_XMM/YMM.
pcmenc: set frame_size to 0.
gsm demuxer: use generic seeking instead of a gsm-specific function.
gsm demuxer: return packets with only 1 gsm block at a time.
avcodec: add GSM parser
doc: Replace ffmpeg references in avserver config file by avconv.
doc: Fix names of av_log color environment variables.
Fix a bunch of platform name and other typos.
Add some missing changelog entries and release 0.8_beta2
No longer build libpostproc by default
wtv: fix memleaks during normal operation
threads: add CODEC_CAP_AUTO_THREADS for libvpx and xavs
Conflicts:
Changelog
RELEASE
cmdutils.c
configure
doc/ffserver.conf
doc/platform.texi
ffplay.c
libavcodec/Makefile
libavcodec/version.h
libavformat/wtv.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Also change synchronize_audio to only calculate the wanted number of samples
instead of doing the actual synchronization, and make swr_convert handle the
sample addition or deletion.
This new method replaces the old buggy way which simply deleted or
multiplied samples.
Signed-off-by: Marton Balint <cus@passwd.hu>
This is required to handle clobbering of XMM registers on Win64
correctly. Fixes FFT and all tests depending on FFT on Win64.
Signed-off-by: Ronald S. Bultje <rsbultje@gmail.com>
Signed-off-by: Janne Grunau <janne-libav@jannau.net>
This fixes some cases where the clipping was entirely missing.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Thanks (for the comments and review) -to: Reimar, beastd, Ronald
This reverts commit 0efd48dfd1.
Reason for the revert is that the code seems based on some
misunderstanding on how the code works.
Conflicts:
libavdevice/v4l2.c
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
The WAVE demuxer returns packets with many blocks per frame, which needs to be
parsed into single blocks. This has a side-effect of fixing the timestamps.
* qatar/master: (22 commits)
rv34: frame-level multi-threading
mpegvideo: claim ownership of referenced pictures
aacsbr: prevent out of bounds memcpy().
ipmovie: fix pts for CODEC_ID_INTERPLAY_DPCM
sierravmd: fix audio pts
bethsoftvideo: Use bytestream2 functions to prevent buffer overreads.
bmpenc: support for PIX_FMT_RGB444
swscale: fix crash in fast_bilinear code when compiled with -mred-zone.
swscale: specify register type.
rv34: use get_bits_left()
avconv: reinitialize the filtergraph on resolution change.
vsrc_buffer: error on changing frame parameters.
avconv: fix -copyinkf.
fate: Update file checksums after the mov muxer change in a78dbada55
movenc: Don't store a nonzero creation time if nothing was set by the caller
bmpdec: support for rgb444 with bitfields compression
rgb2rgb: allow conversion for <15 bpp
doc: fix stray reference to FFmpeg
v4l2: use C99 struct initializer
v4l2: poll the file descriptor
...
Conflicts:
avconv.c
libavcodec/aacsbr.c
libavcodec/bethsoftvideo.c
libavcodec/kmvc.c
libavdevice/v4l2.c
libavfilter/vsrc_buffer.c
libswscale/swscale_unscaled.c
libswscale/x86/input.asm
tests/ref/acodec/alac
tests/ref/acodec/pcm_s16be
tests/ref/acodec/pcm_s24be
tests/ref/acodec/pcm_s32be
tests/ref/acodec/pcm_s8
tests/ref/lavf/mov
tests/ref/vsynth1/dnxhd_1080i
tests/ref/vsynth1/mpeg4
tests/ref/vsynth1/qtrle
tests/ref/vsynth1/svq1
tests/ref/vsynth2/dnxhd_1080i
tests/ref/vsynth2/mpeg4
tests/ref/vsynth2/qtrle
tests/ref/vsynth2/svq1
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* richardpl/sws:
rgb2rgb: remove unused bgr8torgb8()
rgb2rgb: rgb12tobgr12()
rgb2rgb: allow conversion for <15 bpp
bmpenc: support for PIX_FMT_RGB444
bmpdec: support for rgb444 with bitfields compression
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Statistics for bourne.rmvb -an -f null
1 thread: 37.12s user 0.03s system 99% cpu 37.174 total
2 threads: 47.63s user 0.24s system 185% cpu 25.807 total
4 threads: 41.21s user 0.30s system 327% cpu 12.674 total
Under certain conditions pictures could be released before they were
returned with frame-threading. Broken mv computation in the upcoming
rv34 frame-threading patch was caused by this.
To prevent contexts from running out of available pictures the loop
releasing "unused" pictures has to be run for B frames too.
Fixes Libav Bug 195.
This doesn't make the code handle sample rate or upsample/downsample
change properly but this is still a good sanity check.
Based on change by Michael Niedermayer.
Signed-off-by: Alex Converse <alex.converse@gmail.com>
This reverts commit 77d88b872d.
The revert fixes actual overflows and a segfault as the variables
are signed and can be negative.
Conflicts:
libswscale/swscale.c
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
If the creation time is stored in the file as a zero, the
mov demuxer skips exporting the creation time. Currently,
files muxed without a creation time get demuxed with a
Jan 1st 1970 creation timestamp.
Signed-off-by: Martin Storsjö <martin@martin.st>
This test does not work on all platforms and until it does
it just hides new failures, which is really bad.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* qatar/master:
fate: Add tests for more AAC features.
aacps: Add missing newline in error message.
fate: Add tests for vc1/wmapro in ism.
aacdec: Add a fate test for 5.1 channel SBR.
aacdec: Turn off PS for multichannel files that use PCE based configs.
cabac: remove put_cabac_u/ueg from cabac-test.
swscale: RGB4444 and BGR444 input
FATE: add test for xWMA demuxer.
FATE: add test for SMJPEG demuxer and associated IMA ADPCM audio decoder.
mpegaudiodec: optimized iMDCT transform
mpegaudiodec: change imdct window arrangment for better pointer alignment
mpegaudiodec: move imdct and windowing function to mpegaudiodsp
mpegaudiodec: interleave iMDCT buffer to simplify future SIMD implementations
swscale: convert yuy2/uyvy/nv12/nv21ToY/UV from inline asm to yasm.
FATE: test to exercise WTV demuxer.
mjpegdec: K&R formatting cosmetics
swscale: K&R formatting cosmetics for code examples
swscale: K&R reformatting cosmetics for header files
FATE test: cvid-grayscale; ensures that the grayscale Cinepak variant is exercised.
Conflicts:
libavcodec/cabac.c
libavcodec/mjpegdec.c
libavcodec/mpegaudiodec.c
libavcodec/mpegaudiodsp.c
libavcodec/mpegaudiodsp.h
libavcodec/mpegaudiodsp_template.c
libavcodec/x86/Makefile
libavcodec/x86/imdct36_sse.asm
libavcodec/x86/mpegaudiodec_mmx.c
libswscale/swscale-test.c
libswscale/swscale.c
libswscale/swscale_internal.h
libswscale/x86/swscale_template.c
tests/fate/demux.mak
tests/fate/microsoft.mak
tests/fate/video.mak
tests/fate/wma.mak
tests/ref/lavfi/pixfmts_scale
Merged-by: Michael Niedermayer <michaelni@gmx.at>
This allows to get out of ffplay if it or SDL got stuck.
This for example happens when the audio driver is playing something
else and doesnt support mixing multiple sources.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Signed-off-by: Marton Balint <cus@passwd.hu>
The functions are not used in any part of Libav, therefore testing them in the
cabac-test is unnecessary. Since this makes them unused, remove the functions.
Print a "\n" at the end of each section, also print the section name in
the section print function, print the chapter name only in case the
chapter contains multiple entries.
Increase textual output readability - different sections can be
distinguished more easily.
Using an always_inline function makes the memcpy length a constant,
any reasonable compiler will replace it by a single mov instruction
without us having to duplicate the actual code.
Signed-off-by: Reimar Döffinger <Reimar.Doeffinger@gmx.de>
This fixes reads of uninitialized data by the parser when running
FATE sample h264-conformance/SL1_SVA_B.264.
Signed-off-by: Reimar Döffinger <Reimar.Doeffinger@gmx.de>
The new version returns AVERROR(EINVAL) is the specified paramters are invalid,
and also creates the resampler if none was used so far.
Signed-off-by: Marton Balint <cus@passwd.hu>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
(Does not attempt to decode percetual audio data inside.)
Code coverage: libavformat/xwma.c: 3% -> 75%
Signed-off-by: Ronald S. Bultje <rsbultje@gmail.com>
(Don't attempt to decode JPEG data.)
Code coverage: libavformat/smjpeg.c: 0% -> 69%
libavcodec/adpcm.c: 0% -> 10% (fresh run); 92.4% -> 93% following a FATE run
Signed-off-by: Ronald S. Bultje <rsbultje@gmail.com>
>> time ./avconv -i file.avi -f null -
Before : real 0m7.784s
After : real 0m3.662s
Tested on a Intel Core i3 Processor (2 cores, 4 threads).
Signed-off-by: Ronald S. Bultje <rsbultje@gmail.com>
* qatar/master: (29 commits)
cabac: Move code only used within the CABAC test program into the test program.
vp56: Drop unnecessary cabac.h #include.
h264-test: Initialize AVCodecContext.av_class.
build: Skip compiling network.h and rtsp.h if networking is not enabled.
cosmetics: drop some pointless parentheses
Disable annoying warning without changing behavior
faq: Solutions for common problems with sample paths when running FATE.
avcodec: attempt to clarify the CODEC_CAP_DELAY documentation
avcodec: fix avcodec_encode_audio() documentation.
FATE: xmv-demux test; exercise the XMV demuxer without decoding the perceptual codecs inside.
vqf: recognize more metadata chunks
FATE test: BMV demuxer and associated video and audio decoders.
FATE: indeo4 video decoder test.
FATE: update xxan-wc4 test to a sample with more code coverage.
Change the recent h264_mp4toannexb bitstream filter test to output to an elementary stream rather than a program stream.
g722enc: validate AVCodecContext.trellis
g722enc: set frame_size, and also handle an odd number of input samples
g722enc: split encoding into separate functions for trellis vs. no trellis
mpegaudiodec: Use clearer pointer math
tta: Fix returned error code at EOF
...
Conflicts:
libavcodec/h264.c
libavcodec/indeo3.c
libavcodec/interplayvideo.c
libavcodec/ivi_common.c
libavcodec/libxvidff.c
libavcodec/mpegvideo.c
libavcodec/ppc/mpegvideo_altivec.c
libavcodec/tta.c
libavcodec/utils.c
libavfilter/vsrc_buffer.c
libavformat/Makefile
tests/fate/indeo.mak
tests/ref/acodec/g722
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Add -show_frames option to ffprobe.
Partially based on the work of Thomas Kuehnel <kuehnelth@googlemail.com>
for SOCIS 2011.
The wicked idea of creating a special "packets_and_frames" container for
structured formats (JSON and XML) comes from Clément.
rtsp.h relies on network.h and the latter conditionally defines fallback OS
structures that rely on configure tests, which are only run if networking
is enabled.
This fixes various problems with getting stream info. For example playback of the
file of Ticket88. Multithreaded find_stream_info should be reenabled
once it works correctly
This partly reverts 212fd3a1f1
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
The previous sample used for this test only contained type 0 frames.
Replace it with a sample that also features type 1 frames.
Code coverage:
libavcodec/xxan.c: 72% -> 89%
Signed-off-by: Ronald S. Bultje <rsbultje@gmail.com>
* qatar/master:
flicvideo: fix invalid reads
vorbis: Avoid some out-of-bounds reads
vqf: add more known extensions
cabac: remove unused function renorm_cabac_decoder
h264: Only use symbols from the SVQ3 decoder under proper conditionals.
add bytestream2_tell() and bytestream2_seek() functions
parsers: initialize MpegEncContext.slice_context_count to 1
spdifenc: use special alignment for DTS-HD length_code
Conflicts:
libavcodec/flicvideo.c
libavcodec/h264.c
libavcodec/mpeg4video_parser.c
libavcodec/vorbis.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
The decoders should not only be flushed on EOF or error, but also when
e.g. probe size was reached.
It is best to just always flush by default and only disable it
explicitly when we know that we have everything we need.
Fixes trac ticket #879.
Signed-off-by: Reimar Döffinger <Reimar.Doeffinger@gmx.de>
* qatar/master: (21 commits)
ipmovie: do not read audio packets before the codec is known
truemotion2: check size before GetBitContext initialisation
avio: Only do implicit network initialization for network protocols
avio: Add an URLProtocol flag for indicating that a protocol uses network
adpcm: ADPCM Electronic Arts has always two channels
matroskadec: Fix a bug where a pointer was cached to an array that might later move due to a realloc()
fate: Add missing reference file from 9b4767e4.
mov: Support MOV_CH_LAYOUT_USE_DESCRIPTIONS for labeled descriptions.
4xm: Prevent buffer overreads.
mjpegdec: parse RSTn to prevent skipping other data in mjpeg_decode_scan
vp3: add fate test for non-zero last coefficient
vp3: fix streams with non-zero last coefficient
swscale: remove unused U/V arguments from yuv2rgb_write().
timer: K&R formatting cosmetics
lavf: cosmetics, reformat av_read_frame().
lavf: refactor av_read_frame() to make it easier to understand.
Report an error if pitch_lag is zero in AMR-NB decoder.
Revert "4xm: Prevent buffer overreads."
4xm: Prevent buffer overreads.
4xm: pass the correct remaining buffer size to decode_i2_frame().
...
Conflicts:
libavcodec/4xm.c
libavcodec/mjpegdec.c
libavcodec/truemotion2.c
libavformat/ipmovie.c
libavformat/mov_chan.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
The mpeg4 video, H264 and VC-1 parser hold (directly or indirectly)
a MpegEncContext in their private context. Since they do not call the
common mpegvideo init function slice_context_count has explicitly set
to 1.
Prevents a null pointer dereference in the h264 parser and fixes
bug 193.
Author: Mans Rullgard <mans@mansr.com>
Date: Sun Dec 11 21:41:59 2011 +0000
x86: cabac: replace explicit memory references with "m" operands
This replaces the explicit offset(reg) memory references with
"m" operands for the same locations. As a result, one fewer
register operand is needed for these inline asm statements.
This change appears to have broken compilation on darwin, and subsequent
fixes by martin (which did not fix compilation) removed the register
advantage, thus this change seems not a good idea to keep.
See: http://fate.ffmpeg.org/log.cgi?time=20120103122446&log=compile&slot=i386-darwin-llvm-gcc-4.2.1
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Align IEC 61937 length_code for DTS-HD so that
(length_code & 0xf) == 0x8. This is reportedly needed with some
receivers.
Signed-off-by: Ronald S. Bultje <rsbultje@gmail.com>
The implicit network initialization is set to be removed in the
future, but is kept for compatibility. By not doing the implicit
initialization for non-network protocols, we avoid the warning
about avformat_network_init() not being called for these, where
it really doesn't make much sense.
Signed-off-by: Martin Storsjö <martin@martin.st>
This definition is in two files, since the definitions will move
to the private header at the next bump.
Signed-off-by: Martin Storsjö <martin@martin.st>
This issue was discovered while decoding the FATE sample vqa/ws_snd.vqa.
For some unknown reason only audio decoding is tested by FATE for that file,
but not video.
Signed-off-by: Reimar Döffinger <Reimar.Doeffinger@gmx.de>
Not all applications (e.g. MPlayer) set block_align, and
when using a different demuxer it might not even be
easily available.
So fall back to selecting mode based on bit rate as before
if block_align has not useful value.
It can't be worse than failing to decode completely.
Signed-off-by: Reimar Döffinger <Reimar.Doeffinger@gmx.de>
* cus/stable:
ffplay: fix invalid wanted_channel_layout calculation
ffplay: honor SDL_AUDIO_CHANNELS and make sure to use SDL supported number of audio channels
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Check explicitly if enough bits are left to prevent an infinite loop
when the bitstream buffer is not followed by zero-padding.
Based on patches by Michael Niedermayer <michaelni@gmx.at>.
frame_size is the number of bytes left in the packet, so if we are passing
buf-4 we can safely read frame_size+4 bytes.
Signed-off-by: Ronald S. Bultje <rsbultje@gmail.com>
* qatar/master: (46 commits)
mtv: Make sure audio_subsegments is not 0
v4l2: use V4L2_FMT_FLAG_EMULATED only if it is defined
avconv: add symbolic names for -vsync parameters
flvdec: Fix compiler warning for uninitialized variables
rtsp: Fix compiler warning for uninitialized variable
ulti: convert to new bytestream API.
swscale: Use standard multiple inclusion guards in ppc/ header files.
Place some START_TIMER invocations in separate blocks.
v4l2: list available formats
v4l2: set the proper codec_tag
v4l2: refactor device_open
v4l2: simplify away io_method
v4l2: cosmetics
v4l2: uniform and format options
v4l2: do not force interlaced mode
avio: exit early in fill_buffer without read_packet
vc1dec: fix invalid memory access for small video dimensions
rv34: fix invalid memory access for small video dimensions
rv34: joint coefficient decoding and dequantization
avplay: Don't call avio_set_interrupt_cb(NULL)
...
Conflicts:
Changelog
avconv.c
doc/APIchanges
doc/indevs.texi
libavcodec/adxenc.c
libavcodec/dnxhdenc.c
libavcodec/h264.c
libavdevice/v4l2.c
libavformat/flvdec.c
libavformat/mtv.c
libswscale/utils.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Author: Michael Niedermayer <michaelni@gmx.at>
Date: Thu Nov 3 22:38:10 2011 +0100
lavf: fix null pointer dereference in rdt
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
This is no longer needed and causes various problems with RTSP
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
This fixes compilation failures related to START_TIMER/STOP_TIMER macros and
-Werror=declaration-after-statement. START_TIMER declares variables and thus
may not be placed after statements outside of a new block.
Fixes an invalid free() with ass in avi. The sample in bug 98 passes
parts of AVPacket.data as buffer for the AVIOContext. Since the packet
is quite large fill_buffer tries to reallocate the buffer before doing
nothing. Fixes bug 98.
For small video dimensions, these calculations of the upper bound
for pixel access may have a negative result. Using an unsigned
comparison to bound a potentially negative value only works if
the greater operand is non-negative. Fixed by doing edge emulation
when the upper bound is probably negative, everywhere that this
pattern appears.
Signed-off-by: Kostya Shishkov <kostya.shishkov@gmail.com>
For small video dimensions calculations of the upper bound for pixel
access may result in negative value. Using an unsigned comparison
works only if the greater operand is non-negative. This is fixed by
doing edge emulation explicitly for such conditions.
Signed-off-by: Kostya Shishkov <kostya.shishkov@gmail.com>
Perform dequantization while decoding coefficients instead of performing it
on the entire coefficients buffer.
Since quantized coefficients are very sparse, this usually causes a small
speedup. Speedup of around 1% on Panda board compared to the removed here
neon code. Global speedup is probably around 3%.
Signed-off-by: Kostya Shishkov <kostya.shishkov@gmail.com>
Since we don't use avio_set_interrupt_cb for interrupt callbacks,
we don't need to call it to reset the interrupt cb either.
This avoids a warning about use of deprecated functions.
Signed-off-by: Martin Storsjö <martin@martin.st>
This fixes compilation failures related to START_TIMER/STOP_TIMER macros and
-Werror=declaration-after-statement. START_TIMER declares variables and thus
may not be placed after statements outside of a new block.
* qatar/master:
fate: add dxtory test
adx_parser: rewrite.
adxdec: Validate channel count to fix a division by zero.
adxdec: Do not require extradata.
cmdutils: K&R reformatting cosmetics
alacdec: implement the 2-pass prediction type.
alacenc: implement the 2-pass prediction type.
alacenc: do not generate invalid multi-channel ALAC files
alacdec: fill in missing or guessed info about the extradata format.
utvideo: proper median prediction for interlaced videos
lavu: bump lavu minor for av_popcount64
dca: K&R formatting cosmetics
dct: K&R formatting cosmetics
lavf: flush decoders in avformat_find_stream_info().
win32: detect number of CPUs using affinity
Add av_popcount64
snow: Restore three mistakenly removed casts.
Conflicts:
cmdutils.c
doc/APIchanges
libavcodec/adx_parser.c
libavcodec/adxdec.c
libavcodec/alacenc.c
libavutil/avutil.h
tests/fate/screen.mak
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* shariman/wmall:
Fix audio output
Suppress dumping of residues buffer
Use quantizer value read from bitstream
Cosmetics: Remove two empty lines and realign some code
Reset acfilter_prevvalues buffer in clear_codec_buffers()
Fix AC filter buffers and AC filter reversion
Merged-by: Michael Niedermayer <michaelni@gmx.at>
The previous code ended in multiple different infinite
loops. See stl_ten_1_big.sfd as example with and without zzuf
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Signed-off-by: Justin Ruggles <justin.ruggles@gmail.com>
The original code wasn't taking into account the fact that linesize may not equal the frame's width. This is to correct that.
Signed-off-by: Michael Bradshaw <mbradshaw@sorensonmedia.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* qatar/master:
mpegenc: use avctx->slices as number of slices
v410enc: fix undefined signed left shift caused by integer promotion
Release notes: mention cleaned up header includes
fix Changelog file
Fix a bunch of typos.
Drop some pointless void* return value casts from av_malloc() invocations.
wavpack: fix typos in previous cosmetic clean-up commit
wavpack: cosmetics: K&R pretty-printing
avconv: remove the 'codec framerate is different from stream' warning
wavpack: determine sample_fmt before requesting a buffer
bmv audio: implement new audio decoding API
mpegaudiodec: skip all channels when skipping granules
mpegenc: simplify muxrate calculation
Conflicts:
Changelog
avconv.c
doc/RELEASE_NOTES
libavcodec/h264.c
libavcodec/mpeg12.c
libavcodec/mpegaudiodec.c
libavcodec/mpegvideo.c
libavformat/mpegenc.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Up until now, the decoder didn't output anything
in the data buffer. This fixes all the issues
related to sample format, removes leftover code
and actually outputs some audio to data buffer.
With this, the only sample we have can be played.
Seeking is still broken though.
Adds a new member to MpegEncContext to hold the number of used slice
contexts. Fixes segfaults with '-threads 17 -thread_type slice' and
fate-vsynth{1,2}-mpeg{2,4}thread{,_ilace} with --disable-pthreads.
* qatar/master:
avconv: make -frames work for all types of streams, not just video.
bfi: K&R cosmetics
bgmc: K&R cleanup
rawdec: Set start_time to 0 for raw audio files.
Detect 'yuv2' as rawvideo also in avi.
rawdec: propagate pict_type information to the output frame
rawdec: Support more QT 1bpp rawvideo files.
avconv: free bitstream filters
threads: limit the number of automatic threads to MAX_AUTO_THREADS
avplay: K&R cleanup
fate: use rgb24 as output format for dfa tests
threads: set thread_count to 1 when thread support is disabled
threads: introduce CODEC_CAP_AUTO_THREADS and add it to libx264
Conflicts:
ffplay.c
libavcodec/avcodec.h
libavcodec/pthread.c
libavcodec/version.h
tests/ref/fate/dfa1
tests/ref/fate/dfa10
tests/ref/fate/dfa11
tests/ref/fate/dfa2
tests/ref/fate/dfa3
tests/ref/fate/dfa4
tests/ref/fate/dfa5
tests/ref/fate/dfa6
tests/ref/fate/dfa7
tests/ref/fate/dfa8
tests/ref/fate/dfa9
Merged-by: Michael Niedermayer <michaelni@gmx.at>
The fate-h264-bsf-mp4toannexb failures were caused by an integer
overflow of the unneeded multiplication.
Inspired by patch by: Michael Niedermayer <michaelni@gmx.at>
The extra thread added in {frame_}*thread_init was not taken into
account. Explicitly sets thread_count to 1 if only one CPU core was
detected. Also fixes two typos in comments.
Palette is as supposed in native endianness. Converting the pal8 output
to rgb24 is thus necessary for identical CRCs on big and little endian
systems.
Some external codecs have their own code to determine the best number
of threads. This number is not necessary the number of cpu cores.
Thread_count will be only 0 if the codec has CODEC_CAP_AUTO_THREADS.
* qatar/master:
FATE: add tests for dfa
mpegaudiodec: fix seeking.
mpegaudiodec: fix compilation when testing the unchecked bitstream reader
threads: add sysconf based number of CPUs detection
threads: always include necessary headers for number of CPUs detection
threads: default to automatic thread count detection
Changelog: restore version <next> header
cook: K&R formatting cosmetics
Conflicts:
Changelog
libavcodec/version.h
Merged-by: Michael Niedermayer <michaelni@gmx.at>
The safe bitstream reader does not allow using skip_bits_long() to seek to a
point before the start of the buffer, which was needed by the mp3 decoder.
This change instead calculates the start point of the first valid granule and
skips to that position.
Signed-off-by: Justin Ruggles <justin.ruggles@gmail.com>
Since the conditions for the actual usage are more specific a less
preferred method can be used. This would cause compilation errors
because necessary headers are not included.
This works around issues arising from inputs that claim to have a
filesize of 0.
Reported-by: buzz_
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Port MPlayer tinterlace filter from MPlayer, with some ideas taken
from the FFmbc/libavfilter port, with the following main differences:
* added support for full-scale YUVJ formats
* added support for YUVA420P
* request_frame() on the filter is forced to return a frame
* some code factorization (related to the copy_picture_fields() function)
* fixed black padding values for mode 3
Rationale: avfilter_copy_frame_props() was already defined in
libavfilter/avcodec.h, and keeping the lavc/lavfi API glue localized in a
specific file should ease maintainance and help the ones which use
libavfilter without depending on libavcodec.
This has been fixed differently and its revert avoids error messages
when decoding xx.flv. This also reduces the difference to qatar.
This reverts commit 5a2b3f3a52.
Reviewed-by: Derek Buitenhuis <derek.buitenhuis@gmail.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* qatar/master:
fate: whitespace cosmetics
fate: split off video codec FATE tests into their own file
fate: split off audio codec FATE tests into their own file
fate: split off Electronic Arts codec FATE tests into their own file
fate: split off QuickTime codec FATE tests into their own file
fate: split off voice codec FATE tests into their own file
fate: split off demuxer FATE tests into their own file
cosmetics: Drop unnecessary parentheses around return values.
fate: drop pointless _audio and _video suffixes from xan tests
qt-faststart: K&R reformatting; fix comment typos
FATE: Add test for H.264 MP4->annex.B bitstream filter.
Conflicts:
ffplay.c
tests/fate.mak
tests/fate/h264.mak
tests/fate/image.mak
tests/fate/lossless-audio.mak
tests/fate/lossless-video.mak
tests/fate/qtrle.mak
tests/fate/real.mak
tests/fate/screen.mak
Merged-by: Michael Niedermayer <michaelni@gmx.at>
This only happens for a "back" value of 0 which is invalid anyway,
but lcldec does not properly validate input.
Also extend the documentation to specify valid values.
Signed-off-by: Reimar Döffinger <Reimar.Doeffinger@gmx.de>
* qatar/master:
fate: split off DPCM codec FATE tests into their own file
fate: split off PCM codec FATE tests into their own file
libvorbis: K&R reformatting cosmetics
libmp3lame: K&R formatting cosmetics
fate: Add a video test for xxan decoder
mpegvideo_enc: K&R cosmetics (line 1000-2000).
avconv: K&R cosmetics
qt-faststart: Fix up indentation
indeo4: remove two unused variables
doxygen: cleanup style to support older doxy
fate: add more tests for VC-1 decoder
applehttpproto: Apply the same reload interval changes as for the demuxer
applehttp: Use half the target duration as interval if the playlist didn't update
applehttp: Use the last segment duration as reload interval
lagarith: add decode support for arith rgb24 mode
Conflicts:
avconv.c
libavcodec/libmp3lame.c
libavcodec/mpegvideo_enc.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
This reverts commit 9d6b2077b2.
This error is annoying while debugging, and if someone disables it for
convenience, it raises the odds of leaving ffmpeg unbuildable by default.
According to draft-pantos-http-live-streaming-07, 6.3.4,
the duration of the last media segment in the playlist
should be used as initial minimum reload delay.
Signed-off-by: Martin Storsjö <martin@martin.st>
With the current default PES packet size, and very small audio bitrates,
audio packet duration gets too long. For players, which wait for a whole
audio packet (or more) it takes a very long time to start playing sound.
For 24kbps audio, one PES packet is about 1 second long. On Motorola STBs,
we observe about 3 second delay before the playback starts with the
default setting.
Signed-off-by: Anton Khirnov <anton@khirnov.net>
Do not assume the audio packets being always smaller than
DEFAULT_PES_PAYLOAD_SIZE.
Signed-off-by: Jindřich Makovička <makovick@gmail.com>
Signed-off-by: Anton Khirnov <anton@khirnov.net>
* qatar/master:
mpegvideo_enc: K&R cosmetics
doxygen: remove unreplaced variables from custom header and footer
threads: test for sys/param.h and include it for sysctl on OpenBSD
v4l2: remove unneded linux specific asm/types.h include
x86: Fix constraints for decode_significance*_x86
Conflicts:
libavcodec/mpegvideo_enc.c
libavdevice/v4l2.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
The existing code expected a palette buffer holding 256 uint32_t's allocated in the data[1] field of the AVFrame structure, but data[1] was NULL. The bug is fixed by using a fixed local array (palette256) to hold the palette instead.
This solves http://ffmpeg.org/trac/ffmpeg/ticket/833
Signed-off-by: Frank Vernaillen <fr_ve@hotmail.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
av_samples_alloc() behavior changed in bbb46f3ec, resulting in random
data filling the data[] and linesize[] arrays of the returned
AVFilterBufferRef, which was resulting in wrong behavior in case of code
checking on data[i] nullity.
In particular fixes crash in avfilter_filter_samples():
for (i = 0; samplesref->data[i]; i++)
memcpy(link->cur_buf->data[i], samplesref->data[i], samplesref->linesize[0]);
and correctly fills the linesize[] array for planar data.
Originally, prior to 8742a4ff8, the caller code was compiled
within this condition:
ARCH_X86 && HAVE_7REGS && HAVE_EBX_AVAILABLE && !defined(BROKEN_RELOCATIONS)
Since HAVE_7REGS is defined as
(ARCH_X86_64 || (HAVE_EBX_AVAILABLE && HAVE_EBP_AVAILABLE))
the subcondition HAVE_7REGS && HAVE_EBX_AVAILABLE is equal
to HAVE_7REGS (for 32 bit at least). The correct simplification
of the original condition thus is HAVE_7REGS, not
HAVE_EBX_AVAILABLE.
This fixes compilation in some cases where HAVE_EBP_AVAILABLE = 0
and HAVE_EBX_AVAILABLE = 1.
Signed-off-by: Martin Storsjö <martin@martin.st>
* qatar/master:
fate: split off vqf/twinvq FATE tests into their own file
fate: split off mpc FATE tests into their own file
fate: split off libavcodec FATE tests into their own file
fate: split off Microsoft codec FATE tests into their own file
fate: group all VP* codec FATE tests together in one file
swscale: prevent invalid writes in packed_16bpc_bswap
Merged-by: Michael Niedermayer <michaelni@gmx.at>
ID3v2.4 allows for zlib compressed tags, but libavformat skips them.
Implement code to inflate compressed tags.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* qatar/master:
avs: call release_buffer() at the end.
Add minor bumps and APIchanges entries for lavc/lavfi changes.
mpegvideo.c: K&R formatting and cosmetics.
avconv: avoid memcpy in vsrc_buffer when possible.
avconv: implement get_buffer()/release_buffer().
lavfi: add a new function av_buffersrc_buffer().
lavfi: add avfilter_copy_frame_props()
lavc: add format field to AVFrame
lavc: add width and height fields to AVFrame
lavc: add a sample_aspect_ratio field to AVFrame
doxy: add website-alike style to the html output
FAQ: add an entry for common error when using -profile
Conflicts:
avconv.c
cmdutils.c
doc/APIchanges
libavcodec/avcodec.h
libavcodec/mpegvideo.c
libavcodec/utils.c
libavcodec/version.h
libavfilter/Makefile
libavfilter/avfilter.c
libavfilter/avfilter.h
libavfilter/src_movie.c
libavfilter/vsrc_buffer.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
The format is a per-frame property, having it in AVFrame simplify the
operation of extraction of that information, since avoids the need to
access the codec/stream context.
width and height are per-frame properties, setting these values in
AVFrame simplify the operation of extraction of that information,
since avoids the need to check the codec/stream context.
The sample aspect ratio is a per-frame property, so it makes sense to
define it in AVFrame rather than in the codec/stream context.
Simplify application-level sample aspect ratio information extraction,
and allow further simplifications.
When generating the .dep files for .texi sources, verbatim includes
(@verbatiminclude) should also be taken into account.
Signed-off-by: Alexander Strasser <eclipse7@gmx.net>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
The FATE documentation depends on the mentioned file. But that
did break out of tree builds because the file was not found.
Signed-off-by: Alexander Strasser <eclipse7@gmx.net>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* shariman/wmall:
Perform dequantization of channel coefficients
Perform inverse inter-channel decorrelation and ac-filter
Implement revert_inter_ch_decorr() and revert_acfilter()
Enable inverse-MCLMS filter
Fix inverse-MCLMS filtering routines
Do not update buffers in case no speed change is necessary
Use int for channel_coeffs instead of int16_t
Conflicts:
libavcodec/wmalosslessdec.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* qatar/master:
vp3dec: Check coefficient index in vp3_dequant()
svq1dec: call avcodec_set_dimensions() after dimensions changed.
Prepare for 0.8_beta1 snapshot release
threads: check defines before using them in automatic thread detection
pthread: include sys/types.h before sys/sysctl.h
4xm: remove unused variables.
h264: Fix a possible overread in decode_nal_units()
allfilters: fix type of avfilter_vsrc_buffer.
w32thread: call ResetEvent() in pthread_cond_broadcast().
Conflicts:
Changelog
RELEASE
doc/RELEASE_NOTES
libavcodec/pthread.c
libavcodec/vp3.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Based on a patch by Michael Niedermayer <michaelni@gmx.at>
Fixes NGS00145, CVE-2011-4352
Found-by: Phillip Langlois
Signed-off-by: Reinhard Tartler <siretart@tauware.de>
* qatar/master:
build: fix standalone compilation of OMA muxer
build: fix standalone compilation of Microsoft XMV demuxer
build: fix standalone compilation of Core Audio Format demuxer
kvmc: fix invalid reads
4xm: Add a check in decode_i_frame to prevent buffer overreads
adpcm: fix IMA SMJPEG decoding
options: set minimum for "threads" to zero
bsd: use number of logical CPUs as automatic thread count
windows: use number of CPUs as automatic thread count
linux: use number of CPUs as automatic thread count
pthreads: reset active_thread_type when slice thread_init returrns early
v410dec: include correct headers
Drop ALT_ prefix from BITSTREAM_READER_LE name.
lavfi: always build vsrc_buffer.
ra144enc: zero the reflection coeffs if the filter is unstable
sws: readd PAL8 to isPacked()
mov: Don't stick the QuickTime field ordering atom in extradata.
truespeech: fix invalid reads in truespeech_apply_twopoint_filter()
Conflicts:
configure
libavcodec/4xm.c
libavcodec/avcodec.h
libavfilter/Makefile
libavfilter/allfilters.c
libavformat/Makefile
libswscale/swscale_internal.h
Merged-by: Michael Niedermayer <michaelni@gmx.at>
When no data was available both the buffer thread as well as
the main thread would block in select(), when data becomes
available both should move forward and as data is read in the
buffer thread the main thread would block in select() later
the read data was put in the fifo but the main thread still
would be blocked in select() until either the timeout or
another packet would come in.
This is solved in this commit by using a mutex and a condition
variable
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Prior to this a X bytes write could be seen as less than X bytes being
available if the check was done at an unfortunate moment.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Use sched_getaffinity to determine the number of logical CPUs.
Limits the number of threads to 16 since slice threading of H.264
seems to be buggy with more than 16 threads.
This file does not use anything from get_bits.h but needs
intreadwrite.h.
Signed-off-by: Paul B Mahol <onemda@gmail.com>
Signed-off-by: Janne Grunau <janne-libav@jannau.net>
* tjoppen/fuzz_fixes:
mxfdec: Don't crash in mxf_packet_timestamps() if current_edit_unit overflows
mxfdec: Zero nb_ptses in mxf_compute_ptses_fake_index()
mxfdec: Sanity check PreviousPartition
mxfdec: Never seek back in local sets and KLVs
mxfdec: Move the current_partition check inside mxf_read_header()
mxfdec: Fix infinite loop in mxf_packet_timestamps()
mxfdec: Check url_feof() in mxf_read_local_tags()
mxfdec: Check for NULL component
Merged-by: Michael Niedermayer <michaelni@gmx.at>
A list of formats may have been dynamically created by the calling code,
and thus should not be referenced by the sink buffer context.
Avoid possible invalid data reference.
The 'fiel' atoms can be found in H.264 tracks clobbering the extradata.
MJPEG supports non field based extradata, and this data should be
preserved when copying.
This way ffmpeg can be distinguished from the fork by a user
application or a encoded file by a decoder.
The highest value micro had, in the past, that i could find, was 6
thus 100 should be safe.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* qatar/master: (27 commits)
asfdec: add side data to ASFStream packet instead of output packet.
idroqdec: set AVFMTCTX_NOHEADER and create streams as they occur.
nellymoserdec: Indicate that the decoder can handle changed parameters
libavcodec: Apply parameter change side data when decoding audio
flvdec: Add param change side data if the sample rate or channels have changed
libavformat: Add a utility function for adding parameter change side data
libavcodec: Define a side data type for parameter changes
aacdec: Handle new extradata passed as side data
flvdec: Export new AAC/H.264 extradata as side data on the next packet
libavcodec: Define a side data type for new extradata
flacdec: skip all track indices at once instead of looping.
mxf: Add PictureEssenceCoding UL for V210.
mxfdec: consider QuantizationBits between 17 and 24 to be pcm_s24*
mxfenc: Add support for MPEG-2 MP@HL-14 in mxf container.
mxf: H.264/MPEG-4 AVC Intra support
configure: Show whether the safe bitstream reader is enabled
x86: Tighten register constraints for decode_significance*_x86.
Replace Subversion revisions in comments by Git hashes.
h264_cabac: synchronize decode_significance_*_x86 conditionals
w32threads: wait for the waked thread in pthread_cond_signal.
...
Conflicts:
libavcodec/avcodec.h
libavcodec/version.h
libavformat/flvdec.c
libavformat/utils.c
tests/ref/lavfi/pixdesc
tests/ref/lavfi/pixfmts_copy
tests/ref/lavfi/pixfmts_null
tests/ref/lavfi/pixfmts_scale
tests/ref/lavfi/pixfmts_vflip
Merged-by: Michael Niedermayer <michaelni@gmx.at>
This fixes demuxing of file where the first packet is not audio. Such files
are generated by our idroq muxer. It also fixes demuxing of audio only
idroq files.
Also define a codec capability for codecs that can handle
parameters changed externally between decoded packets.
Signed-off-by: Martin Storsjö <martin@martin.st>
Compared to just overwriting the old extradata, this has the
advantage of letting the decoder know exactly when the
extradata changed (otherwise it is changed immediately when the
new extradata packet is demuxed, even if there's old queued packets
awaiting to be decoded). This makes it easier for decoders to
actually react to the change, so they won't have to inspect
the extradata for each packet to see if it might have changed.
This works when sequentially playing a file with sample rate
changes, but if seeking past a new extradata packet in the
file, it obviously doesn't work properly. That case doesn't
work in flash player either, so it's probably ok not to handle
it.
Signed-off-by: Martin Storsjö <martin@martin.st>
Support Main Profile at High 1440 Level in MXF container,
using essence coding label from SMPTE RDD 9, table 6.
Signed-off-by: Janne Grunau <janne-libav@jannau.net>
* tjoppen/mxf_fixes_20111220:
mxfdec: Sanity-check SampleRate
mxfdec: Make sure mxf->nb_index_tables > 0 in mxf_packet_timestamps()
mxfdec: Remove unused variables
mxfdec: Make sure x < index_table->nb_ptses
mxfdec: Ignore the last entry in Avid's index table segments
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Specially crafted files can lead the parsing code to take too long.
We fix a lot of these problems by not allowing local tags to extend past the
end of the set and not allowing other KLVs to be read past the end of
themselves.
On 32-bit OS X with gcc 4.0/4.2 and shared libraries enabled, the ebx register
is not available, but required to assemble the functions.
This reverts commit 8742a4f to a simplified version of the original constraints.
This fixes a deadlock VLC triggered with multithreaded decoding. The
wait forces one of the current waiters to wake and not the thread
which calls pthread_cond_signal() itself.
Signed-off-by: Ronald S. Bultje <rsbultje@gmail.com>
* qatar/master:
lavc: always align height by 32 pixel
raw: add 10bit YUV definitions
nut: support 10bit YUV
mpegvideo_enc: separate declarations and statements
oma: make header compile standalone
vp3: Reorder some functions to fix VP3 build with Theora disabled.
build: fix standalone compilation of ADX encoder
build: fix standalone compilation of ADPCM decoders
build: fix standalone compilation of mpc7/mpc8 decoders
4xm: Use bytestream2 functions to prevent overreads
bytestream: add a new set of bytestream functions with overread checking
mpegts: Suppress invalid timebase warnings on DMB streams.
mpegts: Fix typo in handling sections in the PMT.
vc1dec: Use the right pointer type for the tmp pointer
Conflicts:
libavcodec/4xm.c
libavcodec/utils.c
libavcodec/vc1dec.c
libavcodec/vp3.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Some libavifilter tests use NUT as output even if the produced
files were not decodable. The support for 10bit introduced in
432f0e5b7d and 91b1e6f0c changed the hashes.
This moves declarations without initialisers or with constant
initialisers to the start of a block, and adds do {} while(0)
around some macros, thus allowing declarations within them.
Signed-off-by: Mans Rullgard <mans@mansr.com>
Only the OPAtom demuxing logic is guaranteed to have index tables, meaning OP1a
files that lack an index would cause SIGSEGV.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Interlaced content for most codec requires it.
This patch is a stop-gap pending a serious rework to support
codecs with non 16 pixel macroblocks.
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
Also create a plain text (.txt) file from fate.texi if the makeinfo
program is available.
Signed-off-by: Alexander Strasser <eclipse7@gmx.net>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
The fate.txt file is ported to texinfo format. Therefore the
fate.txt is renamed to fate.texi. The contents of the already
existing fate.texi file are discarded.
However there should be no loss of information. If you find
anything missing, please report.
Signed-off-by: Alexander Strasser <eclipse7@gmx.net>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
When generating the .dep files for .texi sources, verbatim includes
(@verbatiminclude) should also be taken into account.
Signed-off-by: Alexander Strasser <eclipse7@gmx.net>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
The last entry is the total size of the essence container.
Previously a TemporalOffset error would be logged, even though segments like
these are expected.
* qatar/master:
h264: clear trailing bits in partially parsed NAL units
vc1: Handle WVC1 interlaced stream
xl: Fix overreads
mpegts: rename payload_index to payload_size
segment: introduce segmented chain muxer
lavu: add AVERROR_BUG error value
avplay: clear pkt_temp when pkt is freed.
qcelpdec: K&R formatting cosmetics
qcelpdec: cosmetics: drop some pointless parentheses
x86: conditionally compile dnxhd encoder optimizations
Revert "h264: skip start code search if the size of the nal unit is known"
swscale: fix formatting and indentation of unscaled conversion routines.
h264: skip start code search if the size of the nal unit is known
cljr: fix buf_size sanity check
cljr: Check if width and height are positive integers
Conflicts:
libavcodec/cljr.c
libavcodec/vc1dec.c
libavformat/Makefile
libavformat/mpegtsenc.c
libavformat/segment.c
libswscale/swscale_unscaled.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Trailing bits are likely to be non-zero if the NAL unit is truncated.
Clearing the bits make overreads of the bitstream less likely in this
case. Fixes playback of
http://streams.videolan.org/streams/mp4/Mr_MrsSmith-h264_aac.mp4 which
has a forbidden byte sequence of 0x00 0x00 0x00 in it SPS.
* qatar/master:
APIchanges: fill in revision for AVFrame.age deprecation
avcodec: deprecate AVFrame.age
4xm: remove unneeded check for remaining unused data.
lavf: force threads to 1 in avformat_find_stream_info()
swscale: fix overflows in vertical scaling at top/bottom edges.
lavf: add OpenMG audio muxer.
omadec: split data that will be used in the muxer to a separate file.
lavf: rename oma.c -> omadec.c
tmv decoder: set correct pix_fmt
Conflicts:
Changelog
doc/APIchanges
libavcodec/mpegvideo.c
libavcodec/version.h
libavformat/oma.c
libavformat/version.h
libswscale/swscale.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Start code emulation prevention is only required in Annex B bytestream
packed NAL units. For other coding formats the size is already known.
Looking for a start code prefix can result in false positives like in
http://streams.videolan.org/streams/mp4/Mr_MrsSmith-h264_aac.mp4
which has a false positive in the SPS.
Width and height might get passed as 0 and would cause floating point
exceptions in decode_frame.
Fixes bugzilla #149
Signed-off-by: Janne Grunau <janne-libav@jannau.net>
This was intended as an optimisation for skipped blocks in MPEG2
P-frames and never used elsewhere. Removing this "optimisation"
speeds up MPEG2 decoding by 1-2% (ARM Cortex-A9).
Signed-off-by: Mans Rullgard <mans@mansr.com>
* tjoppen/proper_mxf_track_linking:
mxfdec: Don't parse slices or DeltaEntryArrays
mxfdec: Remove dead/useless code
mxfdec: Hybrid demuxing/seeking solution
mxfdec: Add mxf_edit_unit_absolute_offset()
mxfdec: Replace zero IndexDurations with st->duration
mxfdec: Add "fake" index to MXFIndexTable to assist seeking
mxfdec: Add MXFIndexTables
mxfdec: Move mxf_read_packet*() near the bottom of the file
Merged-by: Michael Niedermayer <michaelni@gmx.at>
The previous code ended in multiple different infinite
loops. See stl_ten_1_big.sfd as example with and without zzuf
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
This fixes integer multiplication overflows in RGB48 output
(vertical) scaling as detected by IOC. What happens is that for
certain types of filters (lanczos, spline, bicubic), the
intermediate sum of coefficients in the middle of a filter can
be larger than the fixed-point equivalent of 1.0, even if the
final sum is 1.0. This is fine and we support that.
However, at frame edges, initFilter() will merge the coefficients
for the off-screen pixels into the top or bottom pixel, such as
to emulate edge extension. This means that suddenly, a single
coefficient can be larger than the fixed-point equivalent of
1.0, which the vertical scaling routines do not support.
Therefore, remove the merging of coefficients for edges for
the vertical scaling filter, and instead add edge detection
to the scaler itself so that it copies the pointers (not data)
for the edges (i.e. it uses line[0] for line[-1] as well), so
that a single coefficient is never larger than the fixed-point
equivalent of 1.0.
Previously the decoder only worked if the user had set avctx->pix_fmt
manually. For some reason the libavformat tmv demuxer sets this, so
the problem was not visible in avplay etc.
Signed-off-by: Ronald S. Bultje <rsbultje@gmail.com>
This should be replaced by a more appropriate error code of course but
we should not leave compilation broken until that is decided.
Found-by: jb
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
that way qatar maintains the code for me and i dont need to resolve conflicts.
If someone wants the a32 reader back, only thing you need to do is maintain
it, i would be happy to have it back, iam just not volunteering to maintain
it due to lack of time.
Based on: a1e98f198e by Mans Rullgard.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Many of the test programs directly access internal symbols not
exported from the shared libraries. This allows tests to run
when configured with shared libraries.
Signed-off-by: Mans Rullgard <mans@mansr.com>
This fixes the same overflow as in the RGB48/16-bit YUV scaling;
some filters can overflow both negatively and positively (e.g.
spline/lanczos), so we bias a signed integer so it's "half signed"
and "half unsigned", and can cover overflows in both directions
while maintaining full 31-bit depth.
Signed-off-by: Mans Rullgard <mans@mansr.com>
No difference in PSNR or bitrate in the printed precission with the matrix lobby scene at 322x242
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
We're shifting individual components (8-bit, unsigned) left by 24,
so making them unsigned should give the same results without the
overflow.
Signed-off-by: Ronald S. Bultje <rsbultje@gmail.com>
For certain types of filters where the intermediate sum of coefficients
can go above the fixed-point equivalent of 1.0 in the middle of a filter,
the sum of a 31-bit calculation can overflow in both directions and can
thus not be represented in a 32-bit signed or unsigned integer. To work
around this, we subtract 0x40000000 from a signed integer base, so that
we're halfway signed/unsigned, which makes it fit even if it overflows.
After the filter finishes, we add the scaled bias back after a shift.
We use the same trick for 16-bit bpc YUV output routines.
Signed-off-by: Mans Rullgard <mans@mansr.com>
The buffer splicing relies on the bitstream reader over-reading
the end of the buffer as declared in init_get_bits(), although
more data is actually present. Manually moving the bitstream
boundary after init_get_bits() allows this to work as expected.
Signed-off-by: Mans Rullgard <mans@mansr.com>
The sample has an incomplete last frame. Decoding it is pointless.
The garbage produced was changed by the bitstream reader now
protecting against over-reads.
Signed-off-by: Mans Rullgard <mans@mansr.com>
When turned on, H264/CAVLC gets ~15% (CVPCMNL1_SVA_C.264) slower for
ultra-high-bitrate files, or ~2.5% (CVFI1_SVA_C.264) for lower-bitrate
files. Other codecs are affected to a lesser extent because they are
less optimized; e.g., VC-1 slows down by less than 1% (all on x86).
The patch generated 3 extra instructions (cmp, cmovae and mov) per
call to get_bits().
The performance penalty on ARM is within the error margin for most
files, up to 4% in extreme cases such as CVPCMNL1_SVA_C.264.
Based on work (for GCI) by Aneesh Dogra <lionaneesh@gmail.com>, and
inspired by patch in Chromium by Chris Evans <cevans@chromium.org>.
* qatar/master:
get_bits: remove A32 variant
avconv: support stream specifiers in -metadata and -map_metadata
wavpack: Fix 32-bit clipping
wavpack: Clip samples after shifting
h264: don't drop B-frames after next keyframe on POC reset.
get_bits: remove useless pointer casts
configure: refactor lists of tests and components into variables
rv40: NEON optimised weak loop filter
mpegts: replace some magic numbers with the existing define
swscale: add unscaled packed 16 bit per component endianess conversion
Conflicts:
libavcodec/get_bits.h
libavcodec/h264.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
The A32 bitstream reader variant is only used on ARMv5 and for
Prores due to the larger bit cache this decoder requires.
In benchmarks on ARMv5 (Marvell Sheeva) with gcc 4.6, the only
statistically significant difference between ALT and A32 is
a 4% advantage for ALT in FLAC decoding. There is thus no (longer)
any reason to keep the A32 reader from this point of view.
This patch adds an option to the ALT reader increasing the bit
cache to 32 bits as required by the Prores decoder. Benchmarking
shows no significant change in speed on Intel i7. Again, the
A32 reader fails to justify its existence.
Signed-off-by: Mans Rullgard <mans@mansr.com>
In the case that (frame_flags & 0x03) == 3, hybrid_maxclip
may have had a signed integer overflow.
Signed-off-by: Derek Buitenhuis <derek.buitenhuis@gmail.com>
Signed-off-by: Anton Khirnov <anton@khirnov.net>
It doesn't make much sense to clip pre-shift,
nor is it correct for proper decoding.
Signed-off-by: Derek Buitenhuis <derek.buitenhuis@gmail.com>
Signed-off-by: Anton Khirnov <anton@khirnov.net>
The keyframe after a POC reset may not be the first to be returned to
the user. Therefore, don't reset the expected next POC once we return
a keyframe to the user, but once we know that the next frame in the
return-queue is a keyframe.
width and height might get passed as 0 and would cause floating point
exceptions in decode_frame.
Fixes bugzilla #149
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
This uses the old demuxing code for OP1a and separate demuxing code for OPAtom.
Timestamp output is added to the old demuxing code.
The seeking code is made to seek to the start of the desired EditUnit only,
from which the normal demuxing code takes over (if OP1a). This means we don't
use delta entries or slices, only StreamOffsets.
OPAtom seeking basically works like before.
This also makes D-10 seeking behave the same way as OP1a and OPAtom. In other
words, we allow seeking before the start or past the end for D-10 too.
This fixes ticket #746.
This changes mxf_compute_ptses() to be used for MXFIndexTable, and also adds
code for computing the fake index to it.
This also temporarily disables PTS computation. A future patch will restore it.
XBMC's configure script checks for this function in installed
libavcodec.so to determine VDPAU support.
Fixes ticket #762 reported by Christian Marillat
* qatar/master:
movenc: Rudimentary IODs support.
v410enc: fix output buffer size check
v410enc: include correct headers
fate: add -pix_fmt rgb48le to r210 test
flvenc: Support muxing 16 kHz nellymoser
configure: refactor list of programs into a variable
fate: add r210 decoder test
fate: split off Indeo FATE tests into their own file
fate: split off ATRAC FATE tests into their own file
fate: Add FATE tests for v410 encoder and decoder
ARM: fix external symbol refs in rv40 asm
westwood: Make sure audio header info is present when parsing audio packets
libgsm: Reset the MS mode of GSM in the flush function
libgsm: Set options on the right object
ARM: dca: disable optimised decode_blockcodes() for old gcc
Conflicts:
configure
libavformat/movenc.c
libavformat/movenc.h
tests/fate2.mak
tests/ref/acodec/alac
tests/ref/vsynth1/mpeg4
tests/ref/vsynth2/mpeg4
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Audio header information might get scrambled and would not parse,
yet wsqva_read_packet would try to parse audio packets causing
segfaults such as floating point exception.
Fixes bugzilla #141.
Signed-off-by: Martin Storsjö <martin@martin.st>
The mode is set in libgsm_decode_init, but the decoder
object is simply destroyed and recreated in the flush
function - therefore the mode has to be set again.
This fixes playback using the libgsm_ms decoder in avplay.
Signed-off-by: Martin Storsjö <martin@martin.st>
This reverts commit 4f820131fa.
It is better to abort() than to have remotly exploitable arbitrary code
execution bugs. Even more so that this abort has never been triggered
by any input people threw at it.
If after more extensive testing its removial is found safe we can remove
the abort() later.
* qatar/master: (23 commits)
applehttp: Properly clean up if unable to probe a segment
applehttp: Avoid reading uninitialized memory
fate: Replace misleading "aac" in the name of an ADTS test with "adts".
fate: Drop pointless "-an" from pictor test command.
fate: split off image codec FATE tests into their own file
fate: split off WMA codec FATE tests into their own file
fate: split off lossless video and audio FATE tests into their own files
fate: split off qtrle codec FATE tests into their own file
fate: split off Ut Video codec FATE tests into their own file
fate: split off screen codec FATE tests into their own file
fate: split off Real Inc. codec FATE tests into their own file
fate: split off AC-3 codec FATE tests into their own file
mpegvideo: remove abort() in ff_find_unused_picture()
rv40: NEON optimised loop filter strength selection
rv40: rearrange loop filter functions
configure: cosmetics: sort some lists where appropriate
swscale_mmx: drop no longer required parameters from VSCALEX macros
swscale: Mark yuv2planeX_8_mmx as MMX2; it contains MMX2 instructions.
build: conditionally compile x86 H.264 chroma optimizations
v410 encoder and decoder
...
Conflicts:
Changelog
configure
doc/developer.texi
doc/general.texi
libavcodec/arm/asm.S
libavcodec/avcodec.h
libavcodec/v410dec.c
libavcodec/v410enc.c
libavcodec/version.h
libavcodec/x86/Makefile
libavcodec/x86/dsputil_mmx.c
libswscale/x86/swscale_mmx.c
tests/Makefile
tests/fate2.mak
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* cus/stable:
ffplay: clear pkt_temp when pkt is freed.
ffplay: Fix got_frame type.
ffplay: add 10 minute seek support to ffplay
ffplay: force setting video mode on fullscreen toggle
Merged-by: Michael Niedermayer <michaelni@gmx.at>
This avoids a segfault if the probe function wasn't able to
determine the format.
The bug was found by Panagiotis H.M. Issaris.
Signed-off-by: Martin Storsjö <martin@martin.st>
v410 is a packed 10-bit 4:4:4 YCbCr format used in
QuickTime.
Signed-off-by: Derek Buitenhuis <derek.buitenhuis@gmail.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
A user who wishes to use default error concealment cannot set the
AV_EF_CRCCHECK flag because not every CRC in every format is a
reliable indicator of bitstream damage. In some formats crcrs
can be nonsensical in absence of any damage. We thus add the
AV_EF_CAREFUL flag in addition to the AV_EF_CRCCHECK flag to
allow a user to enable this reliable CRC check without having to
enable all CRC checks in all formats.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
v410 is a packed 10-bit 4:4:4 YCbCr format used in
QuickTime.
Signed-off-by: Derek Buitenhuis <derek.buitenhuis@gmail.com>
Signed-off-by: Diego Biurrun <diego@biurrun.de>
* qatar/master:
ulti: Fix invalid reads
lavf: dealloc private options in av_write_trailer
yadif: support 10bit YUV
vc1: mark with ER_MB_ERROR bits overconsumption
lavc: introduce ER_MB_END and ER_MB_ERROR
error_resilience: use the ER_ namespace
build: move inclusion of subdir.mak to main subdir loop
rv34: NEON optimised 4x4 dequant
rv34: move 4x4 dequant to RV34DSPContext
aacdec: Use intfloat.h rather than local punning union.
Conflicts:
libavcodec/h264.c
libavcodec/vc1dec.c
libavfilter/vf_yadif.c
libavformat/Makefile
Merged-by: Michael Niedermayer <michaelni@gmx.at>
This patch is a generalization of what Michael Niedermayer
fixed in a single case.
The wmv8-drm fate test had been updated accordingly.
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
As far as I could see the only change is increased pos values,
which is as expected with additional metadata in the files.
Signed-off-by: Reimar Döffinger <Reimar.Doeffinger@gmx.de>
It sets the supplied AVFormatContext pointer to NULL after freeing it,
which is safer and its name is consistent with other lavf functions.
Also deprecate av_close_input_file().
These indexes duplicate every entry and have the total size of the essence
container as the last entry.
This patch also computes the size of the packets when unknown.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
I thought it had to do with file offsets, but's actually the offset inside
the essence container.
In other words, unbreak multiple EditUnitByteCounts.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
The change in 599b4c6ef didn't turn out to work properly on
i386 on OS X, where it broke building with PIC enabled.
Signed-off-by: Martin Storsjö <martin@martin.st>
(cherry picked from commit f1dba9e498)
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
The change in 599b4c6ef didn't turn out to work properly on
i386 on OS X, where it broke building with PIC enabled.
Signed-off-by: Martin Storsjö <martin@martin.st>
Firstly, this test never worked as intended, always reporting
success. Secondly, bswap is available from 486 onward and can
thus be assumed present.
Signed-off-by: Mans Rullgard <mans@mansr.com>
With these changes, gcc 4.5 and later recognise it as a bswap
and use the proper instructions on ARM and x86. On x86, the
16-bit bswap is recognised from gcc 4.1.
Signed-off-by: Mans Rullgard <mans@mansr.com>
* qatar/master:
x86: cabac: replace explicit memory references with "m" operands
avplay: don't request a stereo downmix
wmapro: use av_float2int()
lavc: avoid invalid memcpy() in avcodec_default_release_buffer()
lavu: replace int/float punning functions
lavfi: install libavfilter/vsrc_buffer.h
Remove extraneous semicolons
sdp: Restore the original mp4 format h264 extradata if converted
rtpenc: Add support for mp4 format h264
rtpenc: Simplify code by introducing a separate end pointer
movenc: Use the actual converted sample for RTP hinting
Fix a bunch of common typos.
Conflicts:
doc/developer.texi
doc/eval.texi
doc/filters.texi
doc/protocols.texi
ffmpeg.c
ffplay.c
libavcodec/mpegvideo.h
libavcodec/x86/cabac.h
libavfilter/Makefile
libavformat/avformat.h
libavformat/cafdec.c
libavformat/flvdec.c
libavformat/flvenc.c
libavformat/gxfenc.c
libavformat/img2.c
libavformat/movenc.c
libavformat/mpegts.c
libavformat/rtpenc_h264.c
libavformat/utils.c
libavformat/wtv.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Make the function prototype match the argument of
AVCodecCntext.execute() and remove the cast hiding
this mismatch.
Signed-off-by: Mans Rullgard <mans@mansr.com>
This replaces the explicit offset(reg) memory references with
"m" operands for the same locations. As a result, one fewer
register operand is needed for these inline asm statements.
Signed-off-by: Mans Rullgard <mans@mansr.com>
When the buf and last pointers are equal, the FFSWAP() results
in an invalid call to memcpy() with same source and destination
on some targets. Although assigning a struct to itself is valid
C99, gcc does not check for this before calling memcpy().
See http://gcc.gnu.org/bugzilla/show_bug.cgi?id=32667
Signed-off-by: Mans Rullgard <mans@mansr.com>
The existing functions defined in intfloat_readwrite.[ch] are
both slow and incorrect (infinities are not handled).
This introduces a new header with fast, inline conversion
functions using direct union punning assuming an IEEE-754
system, an assumption already made throughout the code.
The one use of Intel/Motorola extended 80-bit format is
replaced by simpler code sufficient under the present
constraints (positive normal values).
The old functions are marked deprecated and retained for
compatibility.
Signed-off-by: Mans Rullgard <mans@mansr.com>
If the sdp is generated before the rtp muxer is initialized
(e.g. as when called from the rtsp muxer), this has to be done,
otherwise the rtp muxer doesn't know that the input really is
in mp4 format.
Signed-off-by: Martin Storsjö <martin@martin.st>
If an annex b bitstream is muxed into mov, the actual written
sample is reformatted to mp4 syntax before writing.
Currently, the RTP hints that copy data from the normal video
track, where the payload data might be offset compared to the
original sample that the RTP hinting used (when 3 byte
annex b startcodes have been converted into 4 byte mp4 format
startcodes).
Signed-off-by: Martin Storsjö <martin@martin.st>
Some files were not shown because too many files have changed in this diff
Show More
Reference in New Issue
Block a user
Blocking a user prevents them from interacting with repositories, such as opening or commenting on pull requests or issues. Learn more about blocking a user.
