AVBufferRef.data and AVPacket.data don't need to have the same value.
AVPacket could point anywhere into the buffer. Likewise, the sizes
don't need to be the same.
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
This works only for extradata sizes up to 128 bytes. Additionally, I
could never actually see it doing anything. The new code using
MMAL_BUFFER_HEADER_FLAG_CONFIG now takes care of this.
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
We can send mp4-style data directly. But for some reason, this requires
sending the extradata as buffer with MMAL_BUFFER_HEADER_FLAG_CONFIG
set. Reuse the infrastructure for sending AVPackets to do this.
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
"int" is useful in testing because provides accurate results across
different plaftforms, so remove it from the scheduled FF_API_UNUSED_MEMBERS
deprecation.
Deprecate the now unused option, but temporarily retain the capability
to disable the now default behaviour.
Mention this change in the AVPacket documentation.
Signed-off-by: Vittorio Giovara <vittorio.giovara@gmail.com>
This also drops setting the frame->pts field. This is usually not set by
decoders, so this would be an inconsistency that's at worst a danger to
the API user.
It appears the buffer->dts field is normally not set by the MMAL
decoder, so don't use it. If it's ever going to be set by MMAL, we
don't know whether the value will be what we want.
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
The generic code in utils.c sets the AVFrame.pkt_dts field from the
packet it was supposedly decoded. This does not have to be true for a
fully asynchronous decoder like mmaldec. It could be overwritten with an
incorrect value. Even if the decoder doesn't determine the DTS (but sets
it to AV_NOPTS_VALUE), it's impossible to determine a correct value in
utils.c.
Decoders can now be marked with FF_CODEC_CAP_SETS_PKT_DTS, in which case
utils.c won't overwrite the field. The decoders are expected to set this
field (even if they only set it to AV_NOPTS_VALUE).
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
This MMAL feature fills in missing timestamps from the framerate set on
the input port. This is generally unwanted, since libavcodec decoders
merely pass through timestamps without ever "fixing" them. The framerate
is also unknown, and even the timebase doesn't have to be set.
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
Don't try to do a blocking wait for MMAL output if we haven't even sent
a single real packet, but only flush packets. Obviously we can't expect
to get anything back.
Additionally, don't send a flush packet to MMAL in the same case. It
appears the MMAL decoder will sometimes hang in mmal_vc_port_disable()
(called from ffmmal_close_decoder()), waiting for a reply from the GPU
which never arrives. Either MMAL disallows sending flush packets without
preceding real data, or it's a MMAL bug.
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
I can't come up with a nice way to handle this. It's hard to keep the
lock-stepped input/output in this case. You can't predict whether the
MMAL decoder will output a picture (because it's asynchronous), so
you have to assume in general that any packet could produce 0 or 1
frames. You can't continue to write input packets to the decoder,
because then you might get too many output frames, which you can't
get rid of because the lavc decoding API does not allow the decoder
to return an output frame without consuming an input frame (except
when flushing).
The ideal fix is a M:N decoding API (preferably asynchronous), which
would make this code potentially much cleaner. For now, this hack
will do.
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
Do not make many assumption on the dimension of the slices and just
try to decode additional lines if there is enough data left.
Decodes all the samples kindly provided by ultramage.
Despite '417792' being reported in the binary decoder, the buffer at
encoding time needs to be bigger to avoid running out of space due to
interlace handling.
Signed-off-by: Vittorio Giovara <vittorio.giovara@gmail.com>
Use a comment to list the reused tables, since it's more flexible than a
table name to keep information like this. The list will expand in later
commits.
Previously most of the error paths leaked.
Also add FF_CODEC_CAP_INIT_THREADSAFE while adding caps_internal;
this decoder wrapper doesn't have any static data that is initialized.
Signed-off-by: Martin Storsjö <martin@martin.st>
For ADTS streams, the output format (number of channels, frame size)
can change at any point (with the latest version of fdk-aac, the decoder
seems to change format after a handful of frames, not outputting the
right format immediately, for cases that worked fine with the earlier
version of the lib).
Previously, the decoder decoded straight into the output frame once the
number of channels and frame size was known. This obviously does not
work if the number of channels or frame size changes.
The alternative would be to allocate the AVFrame with the maximum number
of channels and frame size, and change them afterward decoding into it,
but that may cause confusion to users e.g. of the get_buffer callback.
This solution should be more robust.
CC: libav-stable@libav.org
Signed-off-by: Martin Storsjö <martin@martin.st>
In the latest version of fdk-aac, the decoder can output up to 8
channels; take this into account when preallocating buffers that
need to fit the output from any packet.
CC: libav-stable@libav.org
Signed-off-by: Martin Storsjö <martin@martin.st>
The .text section is already 16-byte aligned by default on all supported
platforms so `SECTION_TEXT` isn't any different from `SECTION .text`.
Signed-off-by: Anton Khirnov <anton@khirnov.net>
Change ALLOC_STACK to always align the stack before allocating stack space for
consistency. Previously alignment would occur either before or after allocating
stack space depending on whether manual alignment was required or not.
Signed-off-by: Anton Khirnov <anton@khirnov.net>
There is an SSE2 implementation so the SSE version is never used. The "SSE"
version also happens to contain SSE2 instructions on x86-64.
Signed-off-by: Anton Khirnov <anton@khirnov.net>
Extract two methods from decode_registered_user_data in order to improve
code readability. Also make the constant holding the allocation size a
64-bit unsigned integer so that the size comparison against INT_MAX makes
sense.
Bug-Id: CID1312090
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
If _WIN32_WINNT is unset, we force it to a new enough value to
make sure the necessary definitions are visible.
When targeting Windows Phone or Windows RT, _WIN32_WINNT should
be at least 0x0602 - otherwise the windows headers themselves
can cause errors (which technically are bugs in the headers).
Raising this value here shouldn't hurt; the alternative would
be to not touch it at all if WINAPI_FAMILY is set to phone/app,
or to force setting it to 0x0602 in configure if unset (for phone/app).
Signed-off-by: Martin Storsjö <martin@martin.st>
When skip_frame is set to _NONKEY the decoder skips everything except intra
slices, which breaks frames that consist of an intra field together with any
other field type; half the frame becomes garbage. This patch fixes the issue by
letting non-intra slices through if they're part of a keyframe.
Signed-off-by: Anton Khirnov <anton@khirnov.net>
This change will reject frames with a texture type which does not match
the stream description.
Signed-off-by: Vittorio Giovara <vittorio.giovara@gmail.com>
This option is extremely codec specific and only a few codecs employ it.
Move it to codec private options instead: mpegenc family supports only 3
values, xavs and x264 use 5, and xvid has a different metric entirely.
Signed-off-by: Vittorio Giovara <vittorio.giovara@gmail.com>
The struct definitions in dxva.h, which are necessary in order to
actually use d3d11va, are hidden when WINAPI_FAMILY targets Windows Phone
or WindowsRT.
Building with WINAPI_FAMILY=WINAPI_FAMILY_DESKTOP_APP is disallowed
when targeting ARM. ("Compiling Desktop applications for the ARM
platform is not supported.") So we set _CRT_BUILD_DESKTOP_APP to 0
to tell the runtime not to detect some issues with this mismatching.
The same tweaks to detect if the API is available is done in dxva2_internal.h
when compiling each DXVA2/D3D11VA decoders.
Signed-off-by: Martin Storsjö <martin@martin.st>
This is triggerable with the HEVC decoder. It is unclear yet whether the
bug is in the calling code or the MSDK, but it seems better to check for
this in any case.
A bug was introduced in 977105407c whereby when
frame height wasn't divisible by the number of threads, pixels would be omitted
from the bottom rows during decode.
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
A bug was introduced in 6b2b26e7af whereby when
frame height wasn't divisible by the number of threads, pixels would be omitted
from the bottom rows during decode.
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
Enjoy some cache locality and use less threads.
About 5x speedup (from 60ms to 12ms to decode a 4k frame).
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
The rationale is that coded_frame was only used to communicate key_frame,
pict_type and quality to the caller, as well as a few other random fields,
in a non predictable, let alone consistent way.
There was agreement that there was no use case for coded_frame, as it is
a full-sized AVFrame container used for just 2-3 int-sized properties,
which shouldn't even belong into the AVCodecContext in the first place.
The appropriate AVPacket flag can be used instead of key_frame, while
quality is exported with the new AVPacketSideData quality factor.
There is no replacement for the other fields as they were unreliable,
mishandled or just not used at all.
Signed-off-by: Vittorio Giovara <vittorio.giovara@gmail.com>
This is necessary to preserve the quality information currently exported
with coded_frame. Add the new side data to every encoder that needs it,
and use it in avconv.
Signed-off-by: Vittorio Giovara <vittorio.giovara@gmail.com>
Allocating coded_frame is what most encoders do anyway, so it makes
sense to always allocate and free it in a single place. Moreover a lot
of encoders freed the frame with av_freep() instead of the correct API
av_frame_free().
This bring uniformity to encoder behaviour and prevents applications
from erroneusly accessing this field when not allocated. Additionally
this helps isolating encoders that export information with coded_frame,
and heavily simplifies its deprecation.
Signed-off-by: Vittorio Giovara <vittorio.giovara@gmail.com>
This change (and the following ones of the same kind) is mainly to
simplify wrapping this section with an #if FF_API block later on.
No functional changes are applied, the fields of the context coded_frame
fields are directly initialized, instead of keeping a reference to the
coded_frame itself.
Signed-off-by: Vittorio Giovara <vittorio.giovara@gmail.com>
The upper halves are not guaranteed to be zero in x86-64.
Also use `test` instead of `and` when the result isn't used for anything other
than as a branch condition, this allows some register moves to be eliminated.
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
Also, make hls_nal_unit() work only on the provided NAL unit, without
requiring a whole decoding context.
This will allow splitting this code for reuse by the parser.
It is used as get_bits argument and reading 0 bits doesn't make sense.
Signed-off-by: Andreas Cadhalpun <Andreas.Cadhalpun@googlemail.com>
Signed-off-by: Anton Khirnov <anton@khirnov.net>
This prevents possible infinite loops with the calling code along the
lines of while (bytestream2_get_bytes_left()) { ... }, where the reader
does not advance.
CC: libav-stable@libav.org
flcoeffs2[pos] should be the log2 of flcoeffs1[pos].
flcoeffs1[0] can be 0 here, thus flcoeffs2[pos] gets set to -inf,
causing problems further down.
This seems to have been copied from imc_decode_level_coefficients in
commit 4eb4bb3 without updating the position.
Signed-off-by: Andreas Cadhalpun <Andreas.Cadhalpun@googlemail.com>
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
Freeze picture release should be set to 1 when we're responding to a
fast update request. For simplicity we set it for all intra frames,
including those that starts a GOP.
Fixes issue where Tandberg MXP1700 does not recover from packet loss
state since it's waiting for the freeze picture relase indication.
Bug-Id: 873
CC: libav-stable@libav.org
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
Ref H.261 recommendation section 4.2.1.3, setting the still image flag
to 1 disables still image mode. Some decoders require this in order to
decode the bitstream as normal video.
Fixes H.261 calls to Cisco E20.
Also, reserved (aka spare) bits should be set to 1 unless specified
otherwise.
Bug-Id: 872
CC: libav-stable@libav.org
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
Every chunk needs at least 8 bytes for chunk_type and chunk_size.
Prevent a possible infinite loop.
CC: libav-stable@libav.org
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
They are used by dnxhd and mpegvideo_enc exclusively, move them to codec
private options instead.
Signed-off-by: Vittorio Giovara <vittorio.giovara@gmail.com>
ELS and ePIC decoder courtesy of Maxim Poliakovski,
cleanup and integration by Diego Biurrun.
Signed-off-by: Diego Biurrun <diego@biurrun.de>
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
The container cropping is applied only when difference is within 16
pixels, and the smallest value between the two is chosen.
Bug-Id: 383
Signed-off-by: Vittorio Giovara <vittorio.giovara@gmail.com>
get_bits should not be used with more than 25 bits.
Signed-off-by: Andreas Cadhalpun <Andreas.Cadhalpun@googlemail.com>
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
Using the internal DXTC routines brings support for non multiple of 4
textures. A new test is added to cover this feature. Hashes differ
since the decoding algorithm is different, though no visual changes
have been spotted.
Signed-off-by: Vittorio Giovara <vittorio.giovara@gmail.com>
This module implements generic texture decompression from different
families (DXTC, RGTC, BCn) and texture compression DXTC 1, 3, and 5.
Signed-off-by: Vittorio Giovara <vittorio.giovara@gmail.com>
Bump the minimum libvpx version to 1.3.0 and rework the configure logic
to fail only if no decoders and encoders are found.
Based on the original patch from Vittorio.
Signed-off-by: Vittorio Giovara <vittorio.giovara@gmail.com>
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
14496-3 suggests packing main_data of MP3 that is usually scattered
into multiple frames due to bit reservoir.
However, after packing main_data into a access unit, bitrate index
in the MPEG audio frame header doesn't match with actual frame size.
In order to accept this, this patch removes unnecessary frame size
checking on mp3 decoder.
Also, mov demuxer was changed to use MP3 parser only on special cases
(QT MOV with specific sample description) to avoid re-packetizing.
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
WebPMemoryWriterClear() must be used instead of free() when
libwebp ABI version is > 0x0203.
Signed-off-by: James Almer <jamrial@gmail.com>
Signed-off-by: Vittorio Giovara <vittorio.giovara@gmail.com>
Also use the frame pixel format instead of the one from the codec
context, which is more robust.
Signed-off-by: Andreas Cadhalpun <Andreas.Cadhalpun@googlemail.com>
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
The AVCodecContext width, height, coded_width, coded_height and format
are used mainly as decoding hints and they get internally overwritten
during the data parsing stage.
Do not assume they match the last AVFrame provided by
avcodec_decode_video2 and assimilated functions since multi-threading
and other frame reordering might make those values to refer to frames
that will be outputted in the future.
CC: libav-stable@libav.org
Fixes clang warning "absolute value function 'fabsf' given an argument
of type 'double' but has parameter of type 'float' which may cause
truncation of value [-Wabsolute-value]".
Having this macro in an header only facilitates the use of such header.
The code increase is minimal and files have one less dependency
on mpegvideo.h.
The main ff_alloc_picture() function is made more generic with all the
parameters necessary as arguments. This will allows to move most of the
related functions to a separate file later.
Right now wrappers are provided to try and minimize the number of
changes in the code.
The channel configuration can be delivered only by the PCE,
try to parse it first and not try to decode until a channel
configuration is set.
CC: libav-stable@libav.org
These are defined in ISO/IEC 14496-3:2009/PDAM 4 for 6.1 and 7.1.
It also defines another 7.1 layout with configuration 14, that one
is not added here for now.
11: 3/3.1 FC FL+FR BL+BR BC LFE
12: 3/2/2.1 FC FL+FR SiL+SiR BL+BR LFE
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
FDK AAC encoder outputs SCE(front)+CPE(front)+CPE(back)+CPE(back) on
MODE_7_1_REAR_SURROUND configuration.
Since decoder couldn't properly map 4 back channels, decoding failed
unless -request_channel_layout 0x8000000000000000 has been specified.
Now we treat first CPE(back) as CPE(side) on channel mapping.
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
The decoder assigns channels using default channel configuration
for 5.1ch when it parses an ADTS frame header using consecutive
channel ids.
When a PCE comes, it reassigns channels using PCE configuration
using directly the ids provided. They can be arbitrary.
Always use consecutive channel ids to avoid decoding glitches due
spurious reconfigurations due the channel ids mismatch between the
two otherwise-identical channel maps.
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
