Compare commits

..

5 Commits

Author SHA1 Message Date
Mark Adler
10daf0d4d7 zlib 1.2.5.1 2011-09-11 11:04:49 -07:00
Mark Adler
9712272c78 zlib 1.2.5 2011-09-09 23:35:10 -07:00
Mark Adler
7301420248 zlib 1.2.4.5 2011-09-09 23:34:55 -07:00
Mark Adler
a7d70663cf zlib 1.2.4.4 2011-09-09 23:34:45 -07:00
Mark Adler
f4498bea28 zlib 1.2.4.3 2011-09-09 23:34:38 -07:00
64 changed files with 1272 additions and 658 deletions

View File

@@ -1,6 +1,88 @@
ChangeLog file for zlib
Changes in 1.2.5.1 (10 Sep 2011)
- Update FAQ entry on shared builds (#13)
- Avoid symbolic argument to chmod in Makefile.in
- Fix bug and add consts in contrib/puff [Oberhumer]
- Update contrib/puff/zeros.raw test file to have all block types
- Add full coverage test for puff in contrib/puff/Makefile
- Fix static-only-build install in Makefile.in
- Fix bug in unzGetCurrentFileInfo() in contrib/minizip [Kuno]
- Add libz.a dependency to shared in Makefile.in for parallel builds
- Spell out "number" (instead of "nb") in zlib.h for total_in, total_out
- Replace $(...) with `...` in configure for non-bash sh [Bowler]
- Add darwin* to Darwin* and solaris* to SunOS\ 5* in configure [Groffen]
- Add solaris* to Linux* in configure to allow gcc use [Groffen]
- Add *bsd* to Linux* case in configure [Bar-Lev]
- Add inffast.obj to dependencies in win32/Makefile.msc
- Correct spelling error in deflate.h [Kohler]
- Change libzdll.a again to libz.dll.a (!) in win32/Makefile.gcc
- Add test to configure for GNU C looking for gcc in output of $cc -v
- Add zlib.pc generation to win32/Makefile.gcc [Weigelt]
- Fix bug in zlib.h for _FILE_OFFSET_BITS set and _LARGEFILE64_SOURCE not
- Add comment in zlib.h that adler32_combine with len2 < 0 makes no sense
- Make NO_DIVIDE option in adler32.c much faster (thanks to John Reiser)
- Make stronger test in zconf.h to include unistd.h for LFS
- Apply Darwin patches for 64-bit file offsets to contrib/minizip [Slack]
- Fix zlib.h LFS support when Z_PREFIX used
- Add updated as400 support (removed from old) [Monnerat]
- Avoid deflate sensitivity to volatile input data
- Avoid division in adler32_combine for NO_DIVIDE
- Clarify the use of Z_FINISH with deflateBound() amount of space
- Set binary for output file in puff.c
- Use u4 type for crc_table to avoid conversion warnings
- Apply casts in zlib.h to avoid conversion warnings
- Add OF to prototypes for adler32_combine_ and crc32_combine_ [Miller]
- Improve inflateSync() documentation to note indeterminancy
- Add deflatePending() function to return the amount of pending output
- Correct the spelling of "specification" in FAQ [Randers-Pehrson]
- Add a check in configure for stdarg.h, use for gzprintf()
- Check that pointers fit in ints when gzprint() compiled old style
- Add dummy name before $(SHAREDLIBV) in Makefile [Bar-Lev, Bowler]
- Delete line in configure that adds -L. libz.a to LDFLAGS [Weigelt]
- Add debug records in assmebler code [Londer]
- Update RFC references to use http://tools.ietf.org/html/... [Li]
- Add --archs option, use of libtool to configure for Mac OS X [Borstel]
Changes in 1.2.5 (19 Apr 2010)
- Disable visibility attribute in win32/Makefile.gcc [Bar-Lev]
- Default to libdir as sharedlibdir in configure [Nieder]
- Update copyright dates on modified source files
- Update trees.c to be able to generate modified trees.h
- Exit configure for MinGW, suggesting win32/Makefile.gcc
- Check for NULL path in gz_open [Homurlu]
Changes in 1.2.4.5 (18 Apr 2010)
- Set sharedlibdir in configure [Torok]
- Set LDFLAGS in Makefile.in [Bar-Lev]
- Avoid mkdir objs race condition in Makefile.in [Bowler]
- Add ZLIB_INTERNAL in front of internal inter-module functions and arrays
- Define ZLIB_INTERNAL to hide internal functions and arrays for GNU C
- Don't use hidden attribute when it is a warning generator (e.g. Solaris)
Changes in 1.2.4.4 (18 Apr 2010)
- Fix CROSS_PREFIX executable testing, CHOST extract, mingw* [Torok]
- Undefine _LARGEFILE64_SOURCE in zconf.h if it is zero, but not if empty
- Try to use bash or ksh regardless of functionality of /bin/sh
- Fix configure incompatibility with NetBSD sh
- Remove attempt to run under bash or ksh since have better NetBSD fix
- Fix win32/Makefile.gcc for MinGW [Bar-Lev]
- Add diagnostic messages when using CROSS_PREFIX in configure
- Added --sharedlibdir option to configure [Weigelt]
- Use hidden visibility attribute when available [Frysinger]
Changes in 1.2.4.3 (10 Apr 2010)
- Only use CROSS_PREFIX in configure for ar and ranlib if they exist
- Use CROSS_PREFIX for nm [Bar-Lev]
- Assume _LARGEFILE64_SOURCE defined is equivalent to true
- Avoid use of undefined symbols in #if with && and ||
- Make *64 prototypes in gzguts.h consistent with functions
- Add -shared load option for MinGW in configure [Bowler]
- Move z_off64_t to public interface, use instead of off64_t
- Remove ! from shell test in configure (not portable to Solaris)
- Change +0 macro tests to -0 for possibly increased portability
Changes in 1.2.4.2 (9 Apr 2010)
- Add consistent carriage returns to readme.txt's in masmx86 and masmx64
- Really provide prototypes for *64 functions when building without LFS
@@ -140,7 +222,7 @@ Changes in 1.2.3.6 (17 Jan 2010)
- Correct email address in configure for system options
- Update make_vms.com and add make_vms.com to contrib/minizip [Zinser]
- Update zlib.map [Brown]
- Fix Makefile.in for Solaris 10 make of example64 and minizip64 [T<EFBFBD>r<EFBFBD>k]
- Fix Makefile.in for Solaris 10 make of example64 and minizip64 [Torok]
- Apply various fixes to CMakeLists.txt [Lowman]
- Add checks on len in gzread() and gzwrite()
- Add error message for no more room for gzungetc()
@@ -224,7 +306,7 @@ Changes in 1.2.3.4 (21 Dec 2009)
- Clear bytes after deflate lookahead to avoid use of uninitialized data
- Change a limit in inftrees.c to be more transparent to Coverity Prevent
- Update win32/zlib.def with exported symbols from zlib.h
- Correct spelling error in zlib.h [Willem]
- Correct spelling errors in zlib.h [Willem, Sobrado]
- Allow Z_BLOCK for deflate() to force a new block
- Allow negative bits in inflatePrime() to delete existing bit buffer
- Add Z_TREES flush option to inflate() to return at end of trees

8
FAQ
View File

@@ -84,8 +84,10 @@ The lastest zlib FAQ is at http://zlib.net/zlib_faq.html
13. How can I make a Unix shared library?
make clean
./configure -s
By default a shared (and a static) library is built for Unix. So:
make distclean
./configure
make
14. How do I install a shared zlib library on Unix?
@@ -325,7 +327,7 @@ The lastest zlib FAQ is at http://zlib.net/zlib_faq.html
correctly points to the zlib specification in RFC 1950 for the "deflate"
transfer encoding, there have been reports of servers and browsers that
incorrectly produce or expect raw deflate data per the deflate
specficiation in RFC 1951, most notably Microsoft. So even though the
specification in RFC 1951, most notably Microsoft. So even though the
"deflate" transfer encoding using the zlib format would be the more
efficient approach (and in fact exactly what the zlib format was designed
for), using the "gzip" transfer encoding is probably more reliable due to

1
INDEX
View File

@@ -17,6 +17,7 @@ zlib.pc.in Template for pkg-config descriptor
zlib2ansi perl script to convert source files for C++ compilation
amiga/ makefiles for Amiga SAS C
as400/ makefiles for AS/400
doc/ documentation for formats and algorithms
msdos/ makefiles for MSDOS
nintendods/ makefile for Nintendo DS

View File

@@ -1,5 +1,5 @@
# Makefile for zlib
# Copyright (C) 1995-2010 Jean-loup Gailly.
# Copyright (C) 1995-2011 Jean-loup Gailly.
# For conditions of distribution and use, see copyright notice in zlib.h
# To compile and test, type:
@@ -25,14 +25,14 @@ CFLAGS=-O
# -Wstrict-prototypes -Wmissing-prototypes
SFLAGS=-O
LDFLAGS=
TEST_LDFLAGS=-L. libz.a
LDSHARED=$(CC)
CPP=$(CC) -E
STATICLIB=libz.a
SHAREDLIB=libz.so
SHAREDLIBV=libz.so.1.2.4.2
SHAREDLIBV=libz.so.1.2.5.1
SHAREDLIBM=libz.so.1
LIBS=$(STATICLIB) $(SHAREDLIBV)
@@ -47,6 +47,7 @@ EXE=
prefix = /usr/local
exec_prefix = ${prefix}
libdir = ${exec_prefix}/lib
sharedlibdir = ${libdir}
includedir = ${prefix}/include
mandir = ${prefix}/share/man
man3dir = ${mandir}/man3
@@ -131,11 +132,11 @@ minigzip64.o: minigzip.c zlib.h zconf.h
.SUFFIXES: .lo
.c.lo:
-@if [ ! -d objs ]; then mkdir objs; fi
-@mkdir objs 2>/dev/null || test -d objs
$(CC) $(SFLAGS) -DPIC -c -o objs/$*.o $<
-@mv objs/$*.o $@
$(SHAREDLIBV): $(PIC_OBJS)
placebo $(SHAREDLIBV): $(PIC_OBJS) libz.a
$(LDSHARED) $(SFLAGS) -o $@ $(PIC_OBJS) $(LDSHAREDLIBC) $(LDFLAGS)
rm -f $(SHAREDLIB) $(SHAREDLIBM)
ln -s $@ $(SHAREDLIB)
@@ -163,16 +164,20 @@ minigzip64$(EXE): minigzip64.o $(STATICLIB)
install-libs: $(LIBS)
-@if [ ! -d $(DESTDIR)$(exec_prefix) ]; then mkdir -p $(DESTDIR)$(exec_prefix); fi
-@if [ ! -d $(DESTDIR)$(libdir) ]; then mkdir -p $(DESTDIR)$(libdir); fi
-@if [ ! -d $(DESTDIR)$(sharedlibdir) ]; then mkdir -p $(DESTDIR)$(sharedlibdir); fi
-@if [ ! -d $(DESTDIR)$(man3dir) ]; then mkdir -p $(DESTDIR)$(man3dir); fi
-@if [ ! -d $(DESTDIR)$(pkgconfigdir) ]; then mkdir -p $(DESTDIR)$(pkgconfigdir); fi
cp $(LIBS) $(DESTDIR)$(libdir)
cd $(DESTDIR)$(libdir); chmod u=rw,go=r $(STATICLIB)
-@(cd $(DESTDIR)$(libdir); $(RANLIB) libz.a || true) >/dev/null 2>&1
-@cd $(DESTDIR)$(libdir); if test "$(SHAREDLIBV)" -a -f $(SHAREDLIBV); then \
chmod 755 $(SHAREDLIBV); \
rm -f $(SHAREDLIB) $(SHAREDLIBM); \
ln -s $(SHAREDLIBV) $(SHAREDLIB); \
ln -s $(SHAREDLIBV) $(SHAREDLIBM); \
cp $(STATICLIB) $(DESTDIR)$(libdir)
chmod 644 $(DESTDIR)$(libdir)/$(STATICLIB)
-@($(RANLIB) $(DESTDIR)$(libdir)/libz.a || true) >/dev/null 2>&1
-@if test -n "$(SHAREDLIBV)"; then \
cp $(SHAREDLIBV) $(DESTDIR)$(sharedlibdir); \
echo "cp $(SHAREDLIBV) $(DESTDIR)$(sharedlibdir)"; \
chmod 755 $(DESTDIR)$(sharedlibdir)/$(SHAREDLIBV); \
echo "chmod 755 $(DESTDIR)$(sharedlibdir)/$(SHAREDLIBV)"; \
rm -f $(DESTDIR)$(sharedlibdir)/$(SHAREDLIB) $(DESTDIR)$(sharedlibdir)/$(SHAREDLIBM); \
ln -s $(DESTDIR)$(sharedlibdir)/$(SHAREDLIBV) $(DESTDIR)$(sharedlibdir)/$(SHAREDLIB); \
ln -s $(DESTDIR)$(sharedlibdir)/$(SHAREDLIBV) $(DESTDIR)$(sharedlibdir)/$(SHAREDLIBM); \
($(LDCONFIG) || true) >/dev/null 2>&1; \
fi
cp zlib.3 $(DESTDIR)$(man3dir)
@@ -190,7 +195,7 @@ install: install-libs
uninstall:
cd $(DESTDIR)$(includedir); rm -f zlib.h zconf.h
cd $(DESTDIR)$(libdir); rm -f libz.a; \
if test "$(SHAREDLIBV)" -a -f $(SHAREDLIBV); then \
if test -n "$(SHAREDLIBV)" -a -f $(SHAREDLIBV); then \
rm -f $(SHAREDLIBV) $(SHAREDLIB) $(SHAREDLIBM); \
fi
cd $(DESTDIR)$(man3dir); rm -f zlib.3

10
README
View File

@@ -1,10 +1,10 @@
ZLIB DATA COMPRESSION LIBRARY
zlib 1.2.4.2 is a general purpose data compression library. All the code is
zlib 1.2.5.1 is a general purpose data compression library. All the code is
thread safe. The data format used by the zlib library is described by RFCs
(Request for Comments) 1950 to 1952 in the files
http://www.ietf.org/rfc/rfc1950.txt (zlib format), rfc1951.txt (deflate format)
and rfc1952.txt (gzip format).
http://tools.ietf.org/html/rfc1950 (zlib format), rfc1951 (deflate format) and
rfc1952 (gzip format).
All functions of the compression library are documented in the file zlib.h
(volunteer to write man pages welcome, contact zlib@gzip.org). A usage example
@@ -31,7 +31,7 @@ Mark Nelson <markn@ieee.org> wrote an article about zlib for the Jan. 1997
issue of Dr. Dobb's Journal; a copy of the article is available at
http://marknelson.us/1997/01/01/zlib-engine/ .
The changes made in version 1.2.4.2 are documented in the file ChangeLog.
The changes made in version 1.2.5.1 are documented in the file ChangeLog.
Unsupported third party contributions are provided in directory contrib/ .
@@ -84,7 +84,7 @@ Acknowledgments:
Copyright notice:
(C) 1995-2010 Jean-loup Gailly and Mark Adler
(C) 1995-2011 Jean-loup Gailly and Mark Adler
This software is provided 'as-is', without any express or implied
warranty. In no event will the authors be held liable for any damages

View File

@@ -1,5 +1,5 @@
/* adler32.c -- compute the Adler-32 checksum of a data stream
* Copyright (C) 1995-2007 Mark Adler
* Copyright (C) 1995-2011 Mark Adler
* For conditions of distribution and use, see copyright notice in zlib.h
*/
@@ -9,9 +9,9 @@
#define local static
local uLong adler32_combine_(uLong adler1, uLong adler2, z_off64_t len2);
local uLong adler32_combine_ OF((uLong adler1, uLong adler2, z_off64_t len2));
#define BASE 65521UL /* largest prime smaller than 65536 */
#define BASE 65521 /* largest prime smaller than 65536 */
#define NMAX 5552
/* NMAX is the largest n such that 255n(n+1)/2 + (n+1)(BASE-1) <= 2^32-1 */
@@ -21,39 +21,44 @@ local uLong adler32_combine_(uLong adler1, uLong adler2, z_off64_t len2);
#define DO8(buf,i) DO4(buf,i); DO4(buf,i+4);
#define DO16(buf) DO8(buf,0); DO8(buf,8);
/* use NO_DIVIDE if your processor does not do division in hardware */
/* use NO_DIVIDE if your processor does not do division in hardware --
try it both ways to see which is faster */
#ifdef NO_DIVIDE
# define MOD(a) \
/* note that this assumes BASE is 65521, where 65536 % 65521 == 15
(thank you to John Reiser for pointing this out) */
# define CHOP(a) \
do { \
if (a >= (BASE << 16)) a -= (BASE << 16); \
if (a >= (BASE << 15)) a -= (BASE << 15); \
if (a >= (BASE << 14)) a -= (BASE << 14); \
if (a >= (BASE << 13)) a -= (BASE << 13); \
if (a >= (BASE << 12)) a -= (BASE << 12); \
if (a >= (BASE << 11)) a -= (BASE << 11); \
if (a >= (BASE << 10)) a -= (BASE << 10); \
if (a >= (BASE << 9)) a -= (BASE << 9); \
if (a >= (BASE << 8)) a -= (BASE << 8); \
if (a >= (BASE << 7)) a -= (BASE << 7); \
if (a >= (BASE << 6)) a -= (BASE << 6); \
if (a >= (BASE << 5)) a -= (BASE << 5); \
if (a >= (BASE << 4)) a -= (BASE << 4); \
if (a >= (BASE << 3)) a -= (BASE << 3); \
if (a >= (BASE << 2)) a -= (BASE << 2); \
if (a >= (BASE << 1)) a -= (BASE << 1); \
unsigned long tmp = a >> 16; \
a &= 0xffffUL; \
a += (tmp << 4) - tmp; \
} while (0)
# define MOD28(a) \
do { \
CHOP(a); \
if (a >= BASE) a -= BASE; \
} while (0)
# define MOD4(a) \
# define MOD(a) \
do { \
if (a >= (BASE << 4)) a -= (BASE << 4); \
if (a >= (BASE << 3)) a -= (BASE << 3); \
if (a >= (BASE << 2)) a -= (BASE << 2); \
if (a >= (BASE << 1)) a -= (BASE << 1); \
CHOP(a); \
MOD28(a); \
} while (0)
# define MOD63(a) \
do { /* this assumes a is not negative */ \
z_off64_t tmp = a >> 32; \
a &= 0xffffffffL; \
a += (tmp << 8) - (tmp << 5) + tmp; \
tmp = a >> 16; \
a &= 0xffffL; \
a += (tmp << 4) - tmp; \
tmp = a >> 16; \
a &= 0xffffL; \
a += (tmp << 4) - tmp; \
if (a >= BASE) a -= BASE; \
} while (0)
#else
# define MOD(a) a %= BASE
# define MOD4(a) a %= BASE
# define MOD28(a) a %= BASE
# define MOD63(a) a %= BASE
#endif
/* ========================================================================= */
@@ -92,7 +97,7 @@ uLong ZEXPORT adler32(adler, buf, len)
}
if (adler >= BASE)
adler -= BASE;
MOD4(sum2); /* only added so many BASE's */
MOD28(sum2); /* only added so many BASE's */
return adler | (sum2 << 16);
}
@@ -137,8 +142,13 @@ local uLong adler32_combine_(adler1, adler2, len2)
unsigned long sum2;
unsigned rem;
/* for negative len, return invalid adler32 as a clue for debugging */
if (len2 < 0)
return 0xffffffffUL;
/* the derivation of this formula is left as an exercise for the reader */
rem = (unsigned)(len2 % BASE);
MOD63(len2); /* assumes len2 >= 0 */
rem = (unsigned)len2;
sum1 = adler1 & 0xffff;
sum2 = rem * sum1;
MOD(sum2);

View File

@@ -34,6 +34,7 @@ STRPGMEXP PGMLVL(*CURRENT) SIGNATURE('ZLIB')
EXPORT SYMBOL("deflateCopy")
EXPORT SYMBOL("deflateReset")
EXPORT SYMBOL("deflateParams")
EXPORT SYMBOL("deflatePending")
EXPORT SYMBOL("deflatePrime")
EXPORT SYMBOL("deflateInit_")
EXPORT SYMBOL("deflateInit2_")
@@ -129,4 +130,54 @@ STRPGMEXP PGMLVL(*CURRENT) SIGNATURE('ZLIB')
EXPORT SYMBOL("zlibCompileFlags")
/*@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@*/
/* Version 1.2.5 additional entry points. */
/*@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@*/
/********************************************************************/
/* *MODULE ADLER32 ZLIB 01/02/01 00:15:09 */
/********************************************************************/
EXPORT SYMBOL("adler32_combine")
EXPORT SYMBOL("adler32_combine64")
/********************************************************************/
/* *MODULE CRC32 ZLIB 01/02/01 00:15:09 */
/********************************************************************/
EXPORT SYMBOL("crc32_combine")
EXPORT SYMBOL("crc32_combine64")
/********************************************************************/
/* *MODULE GZLIB ZLIB 01/02/01 00:15:09 */
/********************************************************************/
EXPORT SYMBOL("gzbuffer")
EXPORT SYMBOL("gzoffset")
EXPORT SYMBOL("gzoffset64")
EXPORT SYMBOL("gzopen64")
EXPORT SYMBOL("gzseek64")
EXPORT SYMBOL("gztell64")
/********************************************************************/
/* *MODULE GZREAD ZLIB 01/02/01 00:15:09 */
/********************************************************************/
EXPORT SYMBOL("gzclose_r")
/********************************************************************/
/* *MODULE GZWRITE ZLIB 01/02/01 00:15:09 */
/********************************************************************/
EXPORT SYMBOL("gzclose_w")
/********************************************************************/
/* *MODULE INFLATE ZLIB 01/02/01 00:15:09 */
/********************************************************************/
EXPORT SYMBOL("inflateMark")
EXPORT SYMBOL("inflatePrime")
EXPORT SYMBOL("inflateReset2")
EXPORT SYMBOL("inflateUndermine")
ENDPGMEXP

110
as400/compile.clp Normal file
View File

@@ -0,0 +1,110 @@
/******************************************************************************/
/* */
/* ZLIB */
/* */
/* Compile sources into modules and link them into a service program. */
/* */
/******************************************************************************/
PGM
/* Configuration adjustable parameters. */
DCL VAR(&SRCLIB) TYPE(*CHAR) LEN(10) +
VALUE('ZLIB') /* Source library. */
DCL VAR(&SRCFILE) TYPE(*CHAR) LEN(10) +
VALUE('SOURCES') /* Source member file. */
DCL VAR(&CTLFILE) TYPE(*CHAR) LEN(10) +
VALUE('TOOLS') /* Control member file. */
DCL VAR(&MODLIB) TYPE(*CHAR) LEN(10) +
VALUE('ZLIB') /* Module library. */
DCL VAR(&SRVLIB) TYPE(*CHAR) LEN(10) +
VALUE('LGPL') /* Service program library. */
DCL VAR(&CFLAGS) TYPE(*CHAR) +
VALUE('OPTIMIZE(40)') /* Compile options. */
DCL VAR(&TGTRLS) TYPE(*CHAR) +
VALUE('V5R3M0') /* Target release. */
/* Working storage. */
DCL VAR(&CMDLEN) TYPE(*DEC) LEN(15 5) VALUE(300) /* Command length. */
DCL VAR(&CMD) TYPE(*CHAR) LEN(512)
DCL VAR(&FIXDCMD) TYPE(*CHAR) LEN(512)
/* Compile sources into modules. */
CHGVAR VAR(&FIXDCMD) VALUE('CRTCMOD' *BCAT &CFLAGS *BCAT +
'SYSIFCOPT(*IFS64IO)' *BCAT +
'DEFINE(''_LARGEFILE64_SOURCE''' *BCAT +
'''_LFS64_LARGEFILE=1'') TGTRLS(' *TCAT &TGTRLS *TCAT +
') SRCFILE(' *TCAT &SRCLIB *TCAT '/' *TCAT +
&SRCFILE *TCAT ') MODULE(' *TCAT &MODLIB *TCAT '/')
CHGVAR VAR(&CMD) VALUE(&FIXDCMD *TCAT 'ADLER32)')
CALL PGM(QCMDEXC) PARM(&CMD &CMDLEN)
CHGVAR VAR(&CMD) VALUE(&FIXDCMD *TCAT 'COMPRESS)')
CALL PGM(QCMDEXC) PARM(&CMD &CMDLEN)
CHGVAR VAR(&CMD) VALUE(&FIXDCMD *TCAT 'CRC32)')
CALL PGM(QCMDEXC) PARM(&CMD &CMDLEN)
CHGVAR VAR(&CMD) VALUE(&FIXDCMD *TCAT 'DEFLATE)')
CALL PGM(QCMDEXC) PARM(&CMD &CMDLEN)
CHGVAR VAR(&CMD) VALUE(&FIXDCMD *TCAT 'GZCLOSE)')
CALL PGM(QCMDEXC) PARM(&CMD &CMDLEN)
CHGVAR VAR(&CMD) VALUE(&FIXDCMD *TCAT 'GZLIB)')
CALL PGM(QCMDEXC) PARM(&CMD &CMDLEN)
CHGVAR VAR(&CMD) VALUE(&FIXDCMD *TCAT 'GZREAD)')
CALL PGM(QCMDEXC) PARM(&CMD &CMDLEN)
CHGVAR VAR(&CMD) VALUE(&FIXDCMD *TCAT 'GZWRITE)')
CALL PGM(QCMDEXC) PARM(&CMD &CMDLEN)
CHGVAR VAR(&CMD) VALUE(&FIXDCMD *TCAT 'INFBACK)')
CALL PGM(QCMDEXC) PARM(&CMD &CMDLEN)
CHGVAR VAR(&CMD) VALUE(&FIXDCMD *TCAT 'INFFAST)')
CALL PGM(QCMDEXC) PARM(&CMD &CMDLEN)
CHGVAR VAR(&CMD) VALUE(&FIXDCMD *TCAT 'INFLATE)')
CALL PGM(QCMDEXC) PARM(&CMD &CMDLEN)
CHGVAR VAR(&CMD) VALUE(&FIXDCMD *TCAT 'INFTREES)')
CALL PGM(QCMDEXC) PARM(&CMD &CMDLEN)
CHGVAR VAR(&CMD) VALUE(&FIXDCMD *TCAT 'TREES)')
CALL PGM(QCMDEXC) PARM(&CMD &CMDLEN)
CHGVAR VAR(&CMD) VALUE(&FIXDCMD *TCAT 'UNCOMPR)')
CALL PGM(QCMDEXC) PARM(&CMD &CMDLEN)
CHGVAR VAR(&CMD) VALUE(&FIXDCMD *TCAT 'ZUTIL)')
CALL PGM(QCMDEXC) PARM(&CMD &CMDLEN)
/* Link modules into a service program. */
CRTSRVPGM SRVPGM(&SRVLIB/ZLIB) +
MODULE(&MODLIB/ADLER32 &MODLIB/COMPRESS +
&MODLIB/CRC32 &MODLIB/DEFLATE +
&MODLIB/GZCLOSE &MODLIB/GZLIB +
&MODLIB/GZREAD &MODLIB/GZWRITE +
&MODLIB/INFBACK &MODLIB/INFFAST +
&MODLIB/INFLATE &MODLIB/INFTREES +
&MODLIB/TREES &MODLIB/UNCOMPR +
&MODLIB/ZUTIL) +
SRCFILE(&SRCLIB/&CTLFILE) SRCMBR(BNDSRC) +
TEXT('ZLIB 1.2.5.1') TGTRLS(&TGTRLS)
ENDPGM

View File

@@ -1,4 +1,4 @@
ZLIB version 1.2.3 for AS400 installation instructions
ZLIB version 1.2.5.1 for AS400 installation instructions
I) From an AS400 *SAVF file:
@@ -70,7 +70,10 @@ II) From the original source distribution:
compress.c COMPRESS C ZLIB - Compress a memory buffer
crc32.c CRC32 C ZLIB - Compute the CRC-32 of a data stream
deflate.c DEFLATE C ZLIB - Compress data using the deflation algorithm
gzio.c GZIO C ZLIB - IO on .gz files
gzclose.c GZCLOSE C ZLIB - Close .gz files
gzlib.c GZLIB C ZLIB - Miscellaneous .gz files IO support
gzread.c GZREAD C ZLIB - Read .gz files
gzwrite.c GZWRITE C ZLIB - Write .gz files
infback.c INFBACK C ZLIB - Inflate using a callback interface
inffast.c INFFAST C ZLIB - Fast proc. literals & length/distance pairs
inflate.c INFLATE C ZLIB - Interface to inflate modules
@@ -81,6 +84,7 @@ II) From the original source distribution:
H Original ZLIB C and ILE/RPG include files
crc32.h CRC32 C ZLIB - CRC32 tables
deflate.h DEFLATE C ZLIB - Internal compression state
gzguts.h GZGUTS C ZLIB - Definitions for the gzclose module
inffast.h INFFAST C ZLIB - Header to use inffast.c
inffixed.h INFFIXED C ZLIB - Table for decoding fixed codes
inflate.h INFLATE C ZLIB - Internal inflate state definitions
@@ -108,4 +112,4 @@ Notes: For AS400 ILE RPG programmers, a /copy member defining the ZLIB
implementation does not handle conversion from/to ASCII, so
text data code conversions must be done explicitely.
Always open zipped files in binary mode.
Mainly for the reason above, always open zipped files in binary mode.

View File

@@ -1,7 +1,7 @@
* ZLIB.INC - Interface to the general purpose compression library
*
* ILE RPG400 version by Patrick Monnerat, DATASPHERE.
* Version 1.2.3.9
* Version 1.2.5.1
*
*
* WARNING:
@@ -22,16 +22,25 @@
*
* Versioning information.
*
D ZLIB_VERSION C '1.2.3.9'
D ZLIB_VERNUM C X'1239'
D ZLIB_VERSION C '1.2.5.1'
D ZLIB_VERNUM C X'1251'
D ZLIB_VER_MAJOR C 1
D ZLIB_VER_MINOR C 2
D ZLIB_VER_REVISION...
D C 5
D ZLIB_VER_SUBREVISION...
D C 0
*
* Other equates.
*
D Z_NO_FLUSH C 0
D Z_PARTIAL_FLUSH...
D C 1
D Z_SYNC_FLUSH C 2
D Z_FULL_FLUSH C 3
D Z_FINISH C 4
D Z_BLOCK C 5
D Z_TREES C 6
*
D Z_OK C 0
D Z_STREAM_END C 1
@@ -72,6 +81,7 @@
D z_streamp S * Stream struct ptr
D gzFile S * File pointer
D z_off_t S 10i 0 Stream offsets
D z_off64_t S 20i 0 Stream offsets
*
**************************************************************************
* Structures
@@ -122,20 +132,36 @@
D source 32767 const options(*varsize) Source buffer
D sourceLen 10U 0 value Source length
*
/if not defined(LARGE_FILES)
D gzopen PR extproc('gzopen')
D like(gzFile)
D path * value options(*string) File pathname
D mode * value options(*string) Open mode
/else
D gzopen PR extproc('gzopen64')
D like(gzFile)
D path * value options(*string) File pathname
D mode * value options(*string) Open mode
*
D gzopen64 PR extproc('gzopen64')
D like(gzFile)
D path * value options(*string) File pathname
D mode * value options(*string) Open mode
/endif
*
D gzdopen PR extproc('gzdopen')
D like(gzFile)
D fd 10i 0 value File descriptor
D fd 10I 0 value File descriptor
D mode * value options(*string) Open mode
*
D gzbuffer PR 10I 0 extproc('gzbuffer')
D file value like(gzFile) File pointer
D size 10U 0 value
*
D gzsetparams PR 10I 0 extproc('gzsetparams')
D file value like(gzFile) File pointer
D level 10I 0 value
D strategy 10i 0 value
D strategy 10I 0 value
*
D gzread PR 10I 0 extproc('gzread')
D file value like(gzFile) File pointer
@@ -160,20 +186,64 @@
D file value like(gzFile) File pointer
D flush 10I 0 value Type of flush
*
/if not defined(LARGE_FILES)
D gzseek PR extproc('gzseek')
D like(z_off_t)
D file value like(gzFile) File pointer
D offset value like(z_off_t) Offset
D whence 10i 0 value Origin
/else
D gzseek PR extproc('gzseek64')
D like(z_off_t)
D file value like(gzFile) File pointer
D offset value like(z_off_t) Offset
D whence 10i 0 value Origin
*
D gzseek64 PR extproc('gzseek64')
D like(z_off64_t)
D file value like(gzFile) File pointer
D offset value like(z_off64_t) Offset
D whence 10i 0 value Origin
/endif
*
D gzrewind PR 10i 0 extproc('gzrewind')
D file value like(gzFile) File pointer
*
/if not defined(LARGE_FILES)
D gztell PR extproc('gztell')
D like(z_off_t)
D file value like(gzFile) File pointer
/else
D gztell PR extproc('gztell64')
D like(z_off_t)
D file value like(gzFile) File pointer
*
D gztell64 PR extproc('gztell64')
D like(z_off64_t)
D file value like(gzFile) File pointer
/endif
*
/if not defined(LARGE_FILES)
D gzoffset PR extproc('gzoffset')
D like(z_off_t)
D file value like(gzFile) File pointer
/else
D gzoffset PR extproc('gzoffset64')
D like(z_off_t)
D file value like(gzFile) File pointer
*
D gzoffset64 PR extproc('gzoffset64')
D like(z_off64_t)
D file value like(gzFile) File pointer
/endif
*
D gzeof PR 10i 0 extproc('gzeof')
D file value like(gzFile) File pointer
*
D gzclose_r PR 10i 0 extproc('gzclose_r')
D file value like(gzFile) File pointer
*
D gzclose_w PR 10i 0 extproc('gzclose_w')
D file value like(gzFile) File pointer
*
D gzclose PR 10i 0 extproc('gzclose')
@@ -253,6 +323,11 @@
D strm like(z_stream) Compression stream
D sourcelen 10U 0 value Compression level
*
D deflatePending PR 10I 0 extproc('deflatePending') Change level & strat
D strm like(z_stream) Compression stream
D pending 10U 0 Pending bytes
D bits 10I 0 Pending bits
*
D deflatePrime PR 10I 0 extproc('deflatePrime') Change level & strat
D strm like(z_stream) Compression stream
D bits 10I 0 value Number of bits to insert
@@ -278,6 +353,18 @@
D source like(z_stream) Source stream
*
D inflateReset PR 10I 0 extproc('inflateReset') End and init. stream
D strm like(z_stream) Expansion stream
*
D inflateReset2 PR 10I 0 extproc('inflateReset2') End and init. stream
D strm like(z_stream) Expansion stream
D windowBits 10I 0 value Log2(buffer size)
*
D inflatePrime PR 10I 0 extproc('inflatePrime') Insert bits
D strm like(z_stream) Expansion stream
D bits 10I 0 value Bit count
D value 10I 0 value Bits to insert
*
D inflateMark PR 10I 0 extproc('inflateMark') Get inflate info
D strm like(z_stream) Expansion stream
*
D inflateBackInit...
@@ -328,4 +415,9 @@
*
D get_crc_table PR * extproc('get_crc_table') Ptr to ulongs
*
D inflateUndermine...
D PR 10I 0 extproc('inflateUndermine')
D strm like(z_stream) Expansion stream
D arg 10I 0 value Error code
*
/endif

120
configure vendored
View File

@@ -13,44 +13,43 @@
# If you have problems, try without defining CC and CFLAGS before reporting
# an error.
# make sure we are running under a compatible shell (stolen from ffmpeg and libnfo)
if test "0$ZLIB_CONFIGURE_EXEC" -lt 1; then
unset foo
(: ${foo%%bar}) 2>/dev/null && ! (: ${foo?}) 2>/dev/null
if test "$?" -ne 0; then
ZLIB_CONFIGURE_EXEC=1
export ZLIB_CONFIGURE_EXEC
type "bash" > /dev/null 2>&1 && exec bash "$0" "$@"
type "ksh" > /dev/null 2>&1 && exec ksh "$0" "$@"
if test -x /usr/xpg4/bin/sh; then
exec /usr/xpg4/bin/sh "$0" "$@"
fi
# echo "No compatible shell script interpreter found."
# exit 1
# we could give up here, but go ahead and give their old sh a try
fi
fi
if [ -n "${CHOST}" ]; then
uname="$(echo "${CHOST}" | sed 's/.*-.*-\(.*\)-.*/\1/')"
uname="`echo "${CHOST}" | sed -e 's/^[^-]*-\([^-]*\)$/\1/' -e 's/^[^-]*-[^-]*-\([^-]*\)$/\1/' -e 's/^[^-]*-[^-]*-\([^-]*\)-.*$/\1/'`"
CROSS_PREFIX="${CHOST}-"
fi
STATICLIB=libz.a
LDFLAGS="${LDFLAGS} -L. ${STATICLIB}"
VER=`sed -n -e '/VERSION "/s/.*"\(.*\)".*/\1/p' < zlib.h`
VER3=`sed -n -e '/VERSION "/s/.*"\([0-9]*\\.[0-9]*\\.[0-9]*\).*/\1/p' < zlib.h`
VER2=`sed -n -e '/VERSION "/s/.*"\([0-9]*\\.[0-9]*\)\\..*/\1/p' < zlib.h`
VER1=`sed -n -e '/VERSION "/s/.*"\([0-9]*\)\\..*/\1/p' < zlib.h`
AR=${AR-"${CROSS_PREFIX}ar"}
if "${CROSS_PREFIX}ar" --version >/dev/null 2>/dev/null || test $? -lt 126; then
AR=${AR-"${CROSS_PREFIX}ar"}
test -n "${CROSS_PREFIX}" && echo Using ${AR}
else
AR=${AR-"ar"}
test -n "${CROSS_PREFIX}" && echo Using ${AR}
fi
AR_RC="${AR} rc"
RANLIB=${RANLIB-"${CROSS_PREFIX}ranlib"}
NM=${NM-"nm"}
if "${CROSS_PREFIX}ranlib" --version >/dev/null 2>/dev/null || test $? -lt 126; then
RANLIB=${RANLIB-"${CROSS_PREFIX}ranlib"}
test -n "${CROSS_PREFIX}" && echo Using ${RANLIB}
else
RANLIB=${RANLIB-"ranlib"}
fi
if "${CROSS_PREFIX}nm" --version >/dev/null 2>/dev/null || test $? -lt 126; then
NM=${NM-"${CROSS_PREFIX}nm"}
test -n "${CROSS_PREFIX}" && echo Using ${NM}
else
NM=${NM-"nm"}
fi
LDCONFIG=${LDCONFIG-"ldconfig"}
LDSHAREDLIBC="${LDSHAREDLIBC-"-lc"}"
LDSHAREDLIBC="${LDSHAREDLIBC--lc}"
ARCHS=
prefix=${prefix-/usr/local}
exec_prefix=${exec_prefix-'${prefix}'}
libdir=${libdir-'${exec_prefix}/lib'}
sharedlibdir=${sharedlibdir-'${libdir}'}
includedir=${includedir-'${prefix}/include'}
mandir=${mandir-'${prefix}/share/man'}
shared_ext='.so'
@@ -67,11 +66,13 @@ case "$1" in
-h* | --help)
echo 'usage:'
echo ' configure [--zprefix] [--prefix=PREFIX] [--eprefix=EXPREFIX]'
echo ' [--static] [--64] [--libdir=LIBDIR] [--includedir=INCLUDEDIR]'
echo ' [--static] [--64] [--libdir=LIBDIR] [--sharedlibdir=LIBDIR]'
echo ' [--includedir=INCLUDEDIR] [--archs="-arch i386 -arch x86_64"]'
exit 0 ;;
-p*=* | --prefix=*) prefix=`echo $1 | sed 's/.*=//'`; shift ;;
-e*=* | --eprefix=*) exec_prefix=`echo $1 | sed 's/.*=//'`; shift ;;
-l*=* | --libdir=*) libdir=`echo $1 | sed 's/.*=//'`; shift ;;
--sharedlibdir=*) sharedlibdir=`echo $1 | sed 's/.*=//'`; shift ;;
-i*=* | --includedir=*) includedir=`echo $1 | sed 's/.*=//'`;shift ;;
-u*=* | --uname=*) uname=`echo $1 | sed 's/.*=//'`;shift ;;
-p* | --prefix) prefix="$2"; shift; shift ;;
@@ -82,6 +83,7 @@ case "$1" in
-t | --static) shared=0; shift ;;
-z* | --zprefix) zprefix=1; shift ;;
-6* | --64) build64=1; shift ;;
-a*=* | --archs=*) ARCHS=`echo $1 | sed 's/.*=//'`; shift ;;
--sysconfdir=*) echo "ignored option: --sysconfdir"; shift ;;
--localstatedir=*) echo "ignored option: --localstatedir"; shift ;;
*) echo "unknown option: $1"; echo "$0 --help for help"; exit 1 ;;
@@ -94,18 +96,22 @@ extern int getchar();
int hello() {return getchar();}
EOF
test -z "$CC" && echo Checking for gcc...
test -z "$CC" && echo Checking for ${CROSS_PREFIX}gcc...
cc=${CC-${CROSS_PREFIX}gcc}
cflags=${CFLAGS-"-O3"}
# to force the asm version use: CFLAGS="-O3 -DASMV" ./configure
case "$cc" in
*gcc*) gcc=1 ;;
esac
case `$cc -v 2>&1` in
*gcc*) gcc=1 ;;
esac
if test "$gcc" -eq 1 && ($cc -c $cflags $test.c) 2>/dev/null; then
CC="$cc"
SFLAGS="${CFLAGS-"-O3"} -fPIC"
CFLAGS="${CFLAGS-"-O3"}"
CFLAGS="${CFLAGS--O3} ${ARCHS}"
SFLAGS="${CFLAGS--O3} -fPIC"
LDFLAGS="${LDFLAGS} ${ARCHS}"
if test $build64 -eq 1; then
CFLAGS="${CFLAGS} -m64"
SFLAGS="${SFLAGS} -m64"
@@ -117,10 +123,16 @@ if test "$gcc" -eq 1 && ($cc -c $cflags $test.c) 2>/dev/null; then
uname=`(uname -s || echo unknown) 2>/dev/null`
fi
case "$uname" in
Linux* | linux* | GNU | GNU/* | *BSD | DragonFly) LDSHARED=${LDSHARED-"$cc -shared -Wl,-soname,libz.so.1,--version-script,zlib.map"} ;;
Linux* | linux* | GNU | GNU/* | *BSD | *bsd* | DragonFly | solaris*)
LDSHARED=${LDSHARED-"$cc -shared -Wl,-soname,libz.so.1,--version-script,zlib.map"} ;;
CYGWIN* | Cygwin* | cygwin* | OS/2*)
EXE='.exe' ;;
MINGW*)
MINGW* | mingw*)
# temporary bypass
rm -f $test.[co] $test $test$shared_ext
echo "Please use win32/Makefile.gcc instead."
exit 1
LDSHARED=${LDSHARED-"$cc -shared"}
LDSHAREDLIBC=""
EXE='.exe' ;;
QNX*) # This is for QNX6. I suppose that the QNX rule below is for QNX2,QNX4
@@ -136,16 +148,20 @@ if test "$gcc" -eq 1 && ($cc -c $cflags $test.c) 2>/dev/null; then
shared_ext='.sl'
SHAREDLIB='libz.sl' ;;
esac ;;
Darwin*) shared_ext='.dylib'
Darwin* | darwin*)
shared_ext='.dylib'
SHAREDLIB=libz$shared_ext
SHAREDLIBV=libz.$VER$shared_ext
SHAREDLIBM=libz.$VER1$shared_ext
LDSHARED=${LDSHARED-"$cc -dynamiclib -install_name $libdir/$SHAREDLIBM -compatibility_version $VER1 -current_version $VER3"} ;;
LDSHARED=${LDSHARED-"$cc -dynamiclib -install_name $libdir/$SHAREDLIBM -compatibility_version $VER1 -current_version $VER3"}
AR="libtool"
AR_RC="${AR} -o" ;;
*) LDSHARED=${LDSHARED-"$cc -shared"} ;;
esac
else
# find system name and corresponding cc options
CC=${CC-cc}
gcc=0
if test -z "$uname"; then
uname=`(uname -sr || echo unknown) 2>/dev/null`
fi
@@ -180,7 +196,8 @@ else
SCO_SV\ 3.2*) SFLAGS=${CFLAGS-"-O3 -dy -KPIC "}
CFLAGS=${CFLAGS-"-O3"}
LDSHARED=${LDSHARED-"cc -dy -KPIC -G"} ;;
SunOS\ 5*) LDSHARED=${LDSHARED-"cc -G"}
SunOS\ 5* | solaris*)
LDSHARED=${LDSHARED-"cc -G"}
case `(uname -m || echo unknown) 2>/dev/null` in
i86*)
SFLAGS=${CFLAGS-"-xpentium -fast -KPIC -R."}
@@ -296,6 +313,18 @@ else
echo "Checking for unistd.h... No."
fi
cat > $test.c <<EOF
#include <stdarg.h>
int main() { return 0; }
EOF
if test "`($CC -c $CFLAGS $test.c) 2>&1`" = ""; then
sed < zconf.h "/^#ifdef HAVE_STDARG_H.* may be/s/def HAVE_STDARG_H\(.*\) may be/ 1\1 was/" > zconf.temp.h
mv zconf.temp.h zconf.h
echo "Checking for stdarg.h... Yes."
else
echo "Checking for stdarg.h... No."
fi
if test $zprefix -eq 1; then
sed < zconf.h "/#ifdef Z_PREFIX.* may be/s/def Z_PREFIX\(.*\) may be/ 1\1 was/" > zconf.temp.h
mv zconf.temp.h zconf.h
@@ -340,7 +369,6 @@ int main()
return (mytest("Hello%d\n", 1));
}
EOF
if test "`($CC $CFLAGS -o $test $test.c) 2>&1`" = ""; then
echo "Checking for vsnprintf() in stdio.h... Yes."
@@ -503,6 +531,28 @@ EOF
fi
fi
if test "$gcc" -eq 1; then
cat > $test.c <<EOF
#if ((__GNUC__-0) * 10 + __GNUC_MINOR__-0 >= 33)
# define ZLIB_INTERNAL __attribute__((visibility ("hidden")))
#else
# define ZLIB_INTERNAL
#endif
int ZLIB_INTERNAL foo;
int main()
{
return 0;
}
EOF
if test "`($CC -c $CFLAGS $test.c) 2>&1`" = ""; then
echo "Checking for attribute(visibility) support... Yes."
else
CFLAGS="$CFLAGS -DNO_VIZ"
SFLAGS="$SFLAGS -DNO_VIZ"
echo "Checking for attribute(visibility) support... No."
fi
fi
CPP=${CPP-"$CC -E"}
case $CFLAGS in
*ASMV*)
@@ -536,6 +586,7 @@ sed < Makefile.in "
/^prefix *=/s#=.*#=$prefix#
/^exec_prefix *=/s#=.*#=$exec_prefix#
/^libdir *=/s#=.*#=$libdir#
/^sharedlibdir *=/s#=.*#=$sharedlibdir#
/^includedir *=/s#=.*#=$includedir#
/^mandir *=/s#=.*#=$mandir#
/^all: */s#:.*#: $ALL#
@@ -557,6 +608,7 @@ sed < zlib.pc.in "
/^prefix *=/s#=.*#=$prefix#
/^exec_prefix *=/s#=.*#=$exec_prefix#
/^libdir *=/s#=.*#=$libdir#
/^sharedlibdir *=/s#=.*#=$sharedlibdir#
/^includedir *=/s#=.*#=$includedir#
/^mandir *=/s#=.*#=$mandir#
/^LDFLAGS *=/s#=.*#=$LDFLAGS#

View File

@@ -83,17 +83,25 @@
.text
/* uInt longest_match(deflate_state *deflatestate, IPos curmatch) */
.cfi_sections .debug_frame
longest_match:
.cfi_startproc
/* Save registers that the compiler may be using, and adjust %esp to */
/* make room for our stack frame. */
pushl %ebp
.cfi_def_cfa_offset 8
.cfi_offset ebp, -8
pushl %edi
.cfi_def_cfa_offset 12
pushl %esi
.cfi_def_cfa_offset 16
pushl %ebx
.cfi_def_cfa_offset 20
subl $LocalVarsSize, %esp
.cfi_def_cfa_offset LocalVarsSize+20
/* Retrieve the function arguments. %ecx will hold cur_match */
/* throughout the entire function. %edx will hold the pointer to the */
@@ -108,7 +116,7 @@ longest_match:
/* if (s->prev_length >= s->good_match) { */
/* chain_length >>= 2; */
/* } */
movl dsPrevLen(%edx), %eax
movl dsGoodMatch(%edx), %ebx
cmpl %ebx, %eax
@@ -336,8 +344,14 @@ LookaheadRet:
/* Restore the stack and return from whence we came. */
addl $LocalVarsSize, %esp
.cfi_def_cfa_offset 20
popl %ebx
.cfi_def_cfa_offset 16
popl %esi
.cfi_def_cfa_offset 12
popl %edi
.cfi_def_cfa_offset 8
popl %ebp
.cfi_def_cfa_offset 4
.cfi_endproc
match_init: ret

View File

@@ -152,7 +152,7 @@ procedure DecompressToUserBuf(const InBuf: Pointer; InBytes: Integer;
const OutBuf: Pointer; BufSize: Integer);
const
zlib_version = '1.2.4.2';
zlib_version = '1.2.5.1';
type
EZlibError = class(Exception);

View File

@@ -156,7 +156,7 @@ namespace DotZLibTests
public void Info_Version()
{
Info info = new Info();
Assert.AreEqual("1.2.4.2", Info.Version);
Assert.AreEqual("1.2.5.1", Info.Version);
Assert.AreEqual(32, info.SizeOfUInt);
Assert.AreEqual(32, info.SizeOfULong);
Assert.AreEqual(32, info.SizeOfPointer);
@@ -271,4 +271,4 @@ namespace DotZLibTests
}
}
#endif
#endif

View File

@@ -9,7 +9,7 @@
#define MAXBITS 15
const char inflate9_copyright[] =
" inflate9 1.2.4.2 Copyright 1995-2010 Mark Adler ";
" inflate9 1.2.5.1 Copyright 1995-2010 Mark Adler ";
/*
If you use the zlib library in a product, an acknowledgment is welcome
in the documentation of your product. If for some reason you cannot
@@ -64,7 +64,7 @@ unsigned short FAR *work;
static const unsigned short lext[31] = { /* Length codes 257..285 extra */
128, 128, 128, 128, 128, 128, 128, 128, 129, 129, 129, 129,
130, 130, 130, 130, 131, 131, 131, 131, 132, 132, 132, 132,
133, 133, 133, 133, 144, 202, 75};
133, 133, 133, 133, 144, 205, 203};
static const unsigned short dbase[32] = { /* Distance codes 0..31 base */
1, 2, 3, 4, 5, 7, 9, 13, 17, 25, 33, 49,
65, 97, 129, 193, 257, 385, 513, 769, 1025, 1537, 2049, 3073,

View File

@@ -73,11 +73,6 @@ inflate_fast_use_mmx:
_TEXT segment
PUBLIC _inflate_fast
ALIGN 4
_inflate_fast:
jmp inflate_fast_entry
@@ -163,7 +158,8 @@ distbits_state equ (76+4+zlib1222sup) ;/* state->distbits */
;SECTION .text
ALIGN 4
inflate_fast_entry:
_inflate_fast proc near
.FPO (16, 4, 0, 0, 1, 0)
push edi
push esi
push ebp
@@ -1078,6 +1074,7 @@ L_done:
pop esi
pop edi
ret
_inflate_fast endp
_TEXT ends
end

View File

@@ -195,6 +195,7 @@ dsNiceMatch equ 136+zlib1222add
ELSE
_longest_match proc near
ENDIF
.FPO (9, 4, 0, 0, 1, 0)
;;; Save registers that the compiler may be using, and adjust esp to
;;; make room for our stack frame.

View File

@@ -14,6 +14,18 @@
#define _CRT_SECURE_NO_WARNINGS
#endif
#ifdef __APPLE__
// In darwin and perhaps other BSD variants off_t is a 64 bit value, hence no need for specific 64 bit functions
#define FOPEN_FUNC(filename, mode) fopen(filename, mode)
#define FTELLO_FUNC(stream) ftello(stream)
#define FSEEKO_FUNC(stream, offset, origin) fseeko(stream, offset, origin)
#else
#define FOPEN_FUNC(filename, mode) fopen64(filename, mode)
#define FTELLO_FUNC(stream) ftello64(stream)
#define FSEEKO_FUNC(stream, offset, origin) fseeko64(stream, offset, origin)
#endif
#include "ioapi.h"
voidpf call_zopen64 (const zlib_filefunc64_32_def* pfilefunc,const void*filename,int mode)
@@ -112,7 +124,7 @@ static voidpf ZCALLBACK fopen64_file_func (voidpf opaque, const void* filename,
mode_fopen = "wb";
if ((filename!=NULL) && (mode_fopen != NULL))
file = fopen64((const char*)filename, mode_fopen);
file = FOPEN_FUNC((const char*)filename, mode_fopen);
return file;
}
@@ -142,7 +154,7 @@ static long ZCALLBACK ftell_file_func (voidpf opaque, voidpf stream)
static ZPOS64_T ZCALLBACK ftell64_file_func (voidpf opaque, voidpf stream)
{
ZPOS64_T ret;
ret = ftello64((FILE *)stream);
ret = FTELLO_FUNC((FILE *)stream);
return ret;
}
@@ -188,7 +200,7 @@ static long ZCALLBACK fseek64_file_func (voidpf opaque, voidpf stream, ZPOS64_T
}
ret = 0;
if(fseeko64((FILE *)stream, offset, fseek_origin) != 0)
if(FSEEKO_FUNC((FILE *)stream, offset, fseek_origin) != 0)
ret = -1;
return ret;

View File

@@ -21,7 +21,7 @@
#ifndef _ZLIBIOAPI64_H
#define _ZLIBIOAPI64_H
#if (!defined(_WIN32)) && (!defined(WIN32))
#if (!defined(_WIN32)) && (!defined(WIN32)) && (!defined(__APPLE__))
// Linux needs this to support file operation on files larger then 4+GB
// But might need better if/def to select just the platforms that needs them.
@@ -38,6 +38,7 @@
#ifndef _FILE_OFFSET_BIT
#define _FILE_OFFSET_BIT 64
#endif
#endif
#include <stdio.h>

View File

@@ -12,7 +12,7 @@
Copyright (C) 2009-2010 Mathias Svensson ( http://result42.com )
*/
#ifndef _WIN32
#if (!defined(_WIN32)) && (!defined(WIN32)) && (!defined(__APPLE__))
#ifndef __USE_FILE_OFFSET64
#define __USE_FILE_OFFSET64
#endif
@@ -27,6 +27,18 @@
#endif
#endif
#ifdef __APPLE__
// In darwin and perhaps other BSD variants off_t is a 64 bit value, hence no need for specific 64 bit functions
#define FOPEN_FUNC(filename, mode) fopen(filename, mode)
#define FTELLO_FUNC(stream) ftello(stream)
#define FSEEKO_FUNC(stream, offset, origin) fseeko(stream, offset, origin)
#else
#define FOPEN_FUNC(filename, mode) fopen64(filename, mode)
#define FTELLO_FUNC(stream) ftello64(stream)
#define FSEEKO_FUNC(stream, offset, origin) fseeko64(stream, offset, origin)
#endif
#include <stdio.h>
#include <stdlib.h>
#include <string.h>
@@ -34,14 +46,15 @@
#include <errno.h>
#include <fcntl.h>
#ifdef unix
# include <unistd.h>
# include <utime.h>
#else
#ifdef _WIN32
# include <direct.h>
# include <io.h>
#else
# include <unistd.h>
# include <utime.h>
#endif
#include "unzip.h"
#define CASESENSITIVITY (0)
@@ -84,7 +97,7 @@ void change_file_date(filename,dosdate,tmu_date)
SetFileTime(hFile,&ftm,&ftLastAcc,&ftm);
CloseHandle(hFile);
#else
#ifdef unix
#ifdef unix || __APPLE__
struct utimbuf ut;
struct tm newdate;
newdate.tm_sec = tmu_date.tm_sec;
@@ -114,10 +127,10 @@ int mymkdir(dirname)
int ret=0;
#ifdef _WIN32
ret = _mkdir(dirname);
#else
#ifdef unix
#elif unix
ret = mkdir (dirname,0775);
#elif __APPLE__
ret = mkdir (dirname,0775);
#endif
#endif
return ret;
}
@@ -364,7 +377,7 @@ int do_extract_currentfile(uf,popt_extract_without_path,popt_overwrite,password)
{
char rep=0;
FILE* ftestexist;
ftestexist = fopen64(write_filename,"rb");
ftestexist = FOPEN_FUNC(write_filename,"rb");
if (ftestexist!=NULL)
{
fclose(ftestexist);
@@ -395,8 +408,7 @@ int do_extract_currentfile(uf,popt_extract_without_path,popt_overwrite,password)
if ((skip==0) && (err==UNZ_OK))
{
fout=fopen64(write_filename,"wb");
fout=FOPEN_FUNC(write_filename,"wb");
/* some zipfile don't contain directory alone before file */
if ((fout==NULL) && ((*popt_extract_without_path)==0) &&
(filename_withoutpath!=(char*)filename_inzip))
@@ -405,7 +417,7 @@ int do_extract_currentfile(uf,popt_extract_without_path,popt_overwrite,password)
*(filename_withoutpath-1)='\0';
makedir(write_filename);
*(filename_withoutpath-1)=c;
fout=fopen64(write_filename,"wb");
fout=FOPEN_FUNC(write_filename,"wb");
}
if (fout==NULL)

View File

@@ -13,7 +13,7 @@
*/
#ifndef _WIN32
#if (!defined(_WIN32)) && (!defined(WIN32)) && (!defined(__APPLE__))
#ifndef __USE_FILE_OFFSET64
#define __USE_FILE_OFFSET64
#endif
@@ -28,6 +28,19 @@
#endif
#endif
#ifdef __APPLE__
// In darwin and perhaps other BSD variants off_t is a 64 bit value, hence no need for specific 64 bit functions
#define FOPEN_FUNC(filename, mode) fopen(filename, mode)
#define FTELLO_FUNC(stream) ftello(stream)
#define FSEEKO_FUNC(stream, offset, origin) fseeko(stream, offset, origin)
#else
#define FOPEN_FUNC(filename, mode) fopen64(filename, mode)
#define FTELLO_FUNC(stream) ftello64(stream)
#define FSEEKO_FUNC(stream, offset, origin) fseeko64(stream, offset, origin)
#endif
#include <stdio.h>
#include <stdlib.h>
#include <string.h>
@@ -35,14 +48,14 @@
#include <errno.h>
#include <fcntl.h>
#ifdef unix
#ifdef _WIN32
# include <direct.h>
# include <io.h>
#else
# include <unistd.h>
# include <utime.h>
# include <sys/types.h>
# include <sys/stat.h>
#else
# include <direct.h>
# include <io.h>
#endif
#include "zip.h"
@@ -81,7 +94,7 @@ uLong filetime(f, tmzip, dt)
return ret;
}
#else
#ifdef unix
#ifdef unix || __APPLE__
uLong filetime(f, tmzip, dt)
char *f; /* name of file to get info on */
tm_zip *tmzip; /* return value: access, modific. and creation times */
@@ -142,7 +155,7 @@ int check_exist_file(filename)
{
FILE* ftestexist;
int ret = 1;
ftestexist = fopen64(filename,"rb");
ftestexist = FOPEN_FUNC(filename,"rb");
if (ftestexist==NULL)
ret = 0;
else
@@ -173,7 +186,8 @@ int getFileCrc(const char* filenameinzip,void*buf,unsigned long size_buf,unsigne
{
unsigned long calculate_crc=0;
int err=ZIP_OK;
FILE * fin = fopen64(filenameinzip,"rb");
FILE * fin = FOPEN_FUNC(filenameinzip,"rb");
unsigned long size_read = 0;
unsigned long total_read = 0;
if (fin==NULL)
@@ -211,13 +225,12 @@ int isLargeFile(const char* filename)
{
int largeFile = 0;
ZPOS64_T pos = 0;
FILE* pFile = fopen64(filename, "rb");
FILE* pFile = FOPEN_FUNC(filename, "rb");
if(pFile != NULL)
{
int n = fseeko64(pFile, 0, SEEK_END);
pos = ftello64(pFile);
int n = FSEEKO_FUNC(pFile, 0, SEEK_END);
pos = FTELLO_FUNC(pFile);
printf("File : %s is %lld bytes\n", filename, pos);
@@ -447,7 +460,7 @@ int main(argc,argv)
printf("error in opening %s in zipfile\n",filenameinzip);
else
{
fin = fopen64(filenameinzip,"rb");
fin = FOPEN_FUNC(filenameinzip,"rb");
if (fin==NULL)
{
err=ZIP_ERRNO;

View File

@@ -1145,7 +1145,7 @@ extern int ZEXPORT unzGetCurrentFileInfo (unzFile file,
szFileName,fileNameBufferSize,
extraField,extraFieldBufferSize,
szComment,commentBufferSize);
if (err==UNZ_OK)
if ((err==UNZ_OK) && (pfile_info != NULL))
{
pfile_info->version = file_info64.version;
pfile_info->version_needed = file_info64.version_needed;

View File

@@ -10,7 +10,7 @@ unit zlibpas;
interface
const
ZLIB_VERSION = '1.2.4.2';
ZLIB_VERSION = '1.2.5.1';
type
alloc_func = function(opaque: Pointer; items, size: Integer): Pointer;
@@ -97,6 +97,7 @@ function deflateCopy(var dest, source: z_stream): Integer;
function deflateReset(var strm: z_stream): Integer;
function deflateParams(var strm: z_stream; level, strategy: Integer): Integer;
function deflateBound(var strm: z_stream; sourceLen: LongInt): LongInt;
function deflatePending(var strm: z_stream; var pending: Integer; var bits: Integer): Integer;
function deflatePrime(var strm: z_stream; bits, value: Integer): Integer;
function inflateInit2(var strm: z_stream; windowBits: Integer): Integer;
function inflateSetDictionary(var strm: z_stream; const dictionary: PChar;
@@ -166,6 +167,7 @@ function deflateEnd; external;
function deflateInit_; external;
function deflateInit2_; external;
function deflateParams; external;
function deflatePending; external;
function deflatePrime; external;
function deflateReset; external;
function deflateSetDictionary; external;

View File

@@ -1,8 +1,42 @@
puff: puff.c puff.h
cc -DTEST -o puff puff.c
CFLAGS=-O
puff: puff.o pufftest.o
puff.o: puff.h
pufftest.o: puff.h
test: puff
puff zeros.raw
puft: puff.c puff.h pufftest.o
cc -fprofile-arcs -ftest-coverage -o puft puff.c pufftest.o
# puff full coverage test (should say 100%)
cov: puft
@rm -f *.gcov *.gcda
@puft -w zeros.raw 2>&1 | cat > /dev/null
@echo '04' | xxd -r -p | puft 2> /dev/null || test $$? -eq 2
@echo '00' | xxd -r -p | puft 2> /dev/null || test $$? -eq 2
@echo '00 00 00 00 00' | xxd -r -p | puft 2> /dev/null || test $$? -eq 254
@echo '00 01 00 fe ff' | xxd -r -p | puft 2> /dev/null || test $$? -eq 2
@echo '01 01 00 fe ff 0a' | xxd -r -p | puft -f 2>&1 | cat > /dev/null
@echo '02 7e ff ff' | xxd -r -p | puft 2> /dev/null || test $$? -eq 246
@echo '02' | xxd -r -p | puft 2> /dev/null || test $$? -eq 2
@echo '04 80 49 92 24 49 92 24 0f b4 ff ff c3 04' | xxd -r -p | puft 2> /dev/null || test $$? -eq 2
@echo '04 80 49 92 24 49 92 24 71 ff ff 93 11 00' | xxd -r -p | puft 2> /dev/null || test $$? -eq 249
@echo '04 c0 81 08 00 00 00 00 20 7f eb 0b 00 00' | xxd -r -p | puft 2> /dev/null || test $$? -eq 246
@echo '0b 00 00' | xxd -r -p | puft -f 2>&1 | cat > /dev/null
@echo '1a 07' | xxd -r -p | puft 2> /dev/null || test $$? -eq 246
@echo '0c c0 81 00 00 00 00 00 90 ff 6b 04' | xxd -r -p | puft 2> /dev/null || test $$? -eq 245
@puft -f zeros.raw 2>&1 | cat > /dev/null
@echo 'fc 00 00' | xxd -r -p | puft 2> /dev/null || test $$? -eq 253
@echo '04 00 fe ff' | xxd -r -p | puft 2> /dev/null || test $$? -eq 252
@echo '04 00 24 49' | xxd -r -p | puft 2> /dev/null || test $$? -eq 251
@echo '04 80 49 92 24 49 92 24 0f b4 ff ff c3 84' | xxd -r -p | puft 2> /dev/null || test $$? -eq 248
@echo '04 00 24 e9 ff ff' | xxd -r -p | puft 2> /dev/null || test $$? -eq 250
@echo '04 00 24 e9 ff 6d' | xxd -r -p | puft 2> /dev/null || test $$? -eq 247
@gcov -n puff.c
clean:
rm -f puff puff.o
rm -f puff puft *.o *.gc*

View File

@@ -2,7 +2,7 @@
* puff.c
* Copyright (C) 2002-2010 Mark Adler
* For conditions of distribution and use, see copyright notice in puff.h
* version 2.1, 4 Apr 2010
* version 2.2, 25 Apr 2010
*
* puff.c is a simple inflate written to be an unambiguous way to specify the
* deflate format. It is not written for speed but rather simplicity. As a
@@ -49,9 +49,9 @@
* - Fix fixed codes table error
* - Provide a scanning mode for determining size of
* uncompressed data
* 1.3 20 Mar 2002 - Go back to lengths for puff() parameters [Jean-loup]
* 1.3 20 Mar 2002 - Go back to lengths for puff() parameters [Gailly]
* - Add a puff.h file for the interface
* - Add braces in puff() for else do [Jean-loup]
* - Add braces in puff() for else do [Gailly]
* - Use indexes instead of pointers for readability
* 1.4 31 Mar 2002 - Simplify construct() code set check
* - Fix some comments
@@ -69,13 +69,19 @@
* - Allow TEST code to read from piped stdin
* 2.1 4 Apr 2010 - Avoid variable initialization for happier compilers
* - Avoid unsigned comparisons for even happier compilers
* 2.2 25 Apr 2010 - Fix bug in variable initializations [Oberhumer]
* - Add const where appropriate [Oberhumer]
* - Split if's and ?'s for coverage testing
* - Break out test code to separate file
* - Move NIL to puff.h
* - Allow incomplete code only if single code length is 1
* - Add full code coverage test to Makefile
*/
#include <setjmp.h> /* for setjmp(), longjmp(), and jmp_buf */
#include "puff.h" /* prototype for puff() */
#define local static /* for local function definitions */
#define NIL ((unsigned char *)0) /* for no output option */
/*
* Maximums for allocations and loops. It is not useful to change these --
@@ -95,7 +101,7 @@ struct state {
unsigned long outcnt; /* bytes written to out so far */
/* input state */
unsigned char *in; /* input buffer */
const unsigned char *in; /* input buffer */
unsigned long inlen; /* available input at in */
unsigned long incnt; /* bytes read so far */
int bitbuf; /* bit buffer */
@@ -123,7 +129,8 @@ local int bits(struct state *s, int need)
/* load at least need bits into val */
val = s->bitbuf;
while (s->bitcnt < need) {
if (s->incnt == s->inlen) longjmp(s->env, 1); /* out of input */
if (s->incnt == s->inlen)
longjmp(s->env, 1); /* out of input */
val |= (long)(s->in[s->incnt++]) << s->bitcnt; /* load eight bits */
s->bitcnt += 8;
}
@@ -162,7 +169,8 @@ local int stored(struct state *s)
s->bitcnt = 0;
/* get length and check against its one's complement */
if (s->incnt + 4 > s->inlen) return 2; /* not enough input */
if (s->incnt + 4 > s->inlen)
return 2; /* not enough input */
len = s->in[s->incnt++];
len |= s->in[s->incnt++] << 8;
if (s->in[s->incnt++] != (~len & 0xff) ||
@@ -170,7 +178,8 @@ local int stored(struct state *s)
return -2; /* didn't match complement! */
/* copy len bytes from in to out */
if (s->incnt + len > s->inlen) return 2; /* not enough input */
if (s->incnt + len > s->inlen)
return 2; /* not enough input */
if (s->out != NIL) {
if (s->outcnt + len > s->outlen)
return 1; /* not enough output space */
@@ -222,7 +231,7 @@ struct huffman {
* in the deflate format. See the format notes for fixed() and dynamic().
*/
#ifdef SLOW
local int decode(struct state *s, struct huffman *h)
local int decode(struct state *s, const struct huffman *h)
{
int len; /* current number of bits in code */
int code; /* len bits being decoded */
@@ -250,7 +259,7 @@ local int decode(struct state *s, struct huffman *h)
* a few percent larger.
*/
#else /* !SLOW */
local int decode(struct state *s, struct huffman *h)
local int decode(struct state *s, const struct huffman *h)
{
int len; /* current number of bits in code */
int code; /* len bits being decoded */
@@ -283,10 +292,13 @@ local int decode(struct state *s, struct huffman *h)
len++;
}
left = (MAXBITS+1) - len;
if (left == 0) break;
if (s->incnt == s->inlen) longjmp(s->env, 1); /* out of input */
if (left == 0)
break;
if (s->incnt == s->inlen)
longjmp(s->env, 1); /* out of input */
bitbuf = s->in[s->incnt++];
if (left > 8) left = 8;
if (left > 8)
left = 8;
}
return -10; /* ran out of codes */
}
@@ -324,7 +336,7 @@ local int decode(struct state *s, struct huffman *h)
* - Within a given code length, the symbols are kept in ascending order for
* the code bits definition.
*/
local int construct(struct huffman *h, short *length, int n)
local int construct(struct huffman *h, const short *length, int n)
{
int symbol; /* current symbol when stepping through length[] */
int len; /* current length when stepping through h->count[] */
@@ -344,7 +356,8 @@ local int construct(struct huffman *h, short *length, int n)
for (len = 1; len <= MAXBITS; len++) {
left <<= 1; /* one more bit, double codes left */
left -= h->count[len]; /* deduct count from possible codes */
if (left < 0) return left; /* over-subscribed--return negative */
if (left < 0)
return left; /* over-subscribed--return negative */
} /* left > 0 means incomplete */
/* generate offsets into symbol table for each length for sorting */
@@ -420,8 +433,8 @@ local int construct(struct huffman *h, short *length, int n)
* defined to do the wrong thing in this case.
*/
local int codes(struct state *s,
struct huffman *lencode,
struct huffman *distcode)
const struct huffman *lencode,
const struct huffman *distcode)
{
int symbol; /* decoded symbol */
int len; /* length for copy */
@@ -444,11 +457,13 @@ local int codes(struct state *s,
/* decode literals and length/distance pairs */
do {
symbol = decode(s, lencode);
if (symbol < 0) return symbol; /* invalid symbol */
if (symbol < 0)
return symbol; /* invalid symbol */
if (symbol < 256) { /* literal: symbol is the byte */
/* write out the literal */
if (s->out != NIL) {
if (s->outcnt == s->outlen) return 1;
if (s->outcnt == s->outlen)
return 1;
s->out[s->outcnt] = symbol;
}
s->outcnt++;
@@ -456,12 +471,14 @@ local int codes(struct state *s,
else if (symbol > 256) { /* length */
/* get and compute length */
symbol -= 257;
if (symbol >= 29) return -10; /* invalid fixed code */
if (symbol >= 29)
return -10; /* invalid fixed code */
len = lens[symbol] + bits(s, lext[symbol]);
/* get and check distance */
symbol = decode(s, distcode);
if (symbol < 0) return symbol; /* invalid symbol */
if (symbol < 0)
return symbol; /* invalid symbol */
dist = dists[symbol] + bits(s, dext[symbol]);
#ifndef INFLATE_ALLOW_INVALID_DISTANCE_TOOFAR_ARRR
if (dist > s->outcnt)
@@ -470,13 +487,15 @@ local int codes(struct state *s,
/* copy length bytes from distance bytes back */
if (s->out != NIL) {
if (s->outcnt + len > s->outlen) return 1;
if (s->outcnt + len > s->outlen)
return 1;
while (len--) {
s->out[s->outcnt] =
#ifdef INFLATE_ALLOW_INVALID_DISTANCE_TOOFAR_ARRR
dist > s->outcnt ? 0 :
dist > s->outcnt ?
0 :
#endif
s->out[s->outcnt - dist];
s->out[s->outcnt - dist];
s->outcnt++;
}
}
@@ -525,6 +544,12 @@ local int fixed(struct state *s)
int symbol;
short lengths[FIXLCODES];
/* construct lencode and distcode */
lencode.count = lencnt;
lencode.symbol = lensym;
distcode.count = distcnt;
distcode.symbol = distsym;
/* literal/length table */
for (symbol = 0; symbol < 144; symbol++)
lengths[symbol] = 8;
@@ -541,12 +566,6 @@ local int fixed(struct state *s)
lengths[symbol] = 5;
construct(&distcode, lengths, MAXDCODES);
/* construct lencode and distcode */
lencode.count = lencnt;
lencode.symbol = lensym;
distcode.count = distcnt;
distcode.symbol = distsym;
/* do this just once */
virgin = 0;
}
@@ -675,7 +694,8 @@ local int dynamic(struct state *s)
/* build huffman table for code lengths codes (use lencode temporarily) */
err = construct(&lencode, lengths, 19);
if (err != 0) return -4; /* require complete code set here */
if (err != 0) /* require complete code set here */
return -4;
/* read length/literal and distance code length tables */
index = 0;
@@ -689,7 +709,8 @@ local int dynamic(struct state *s)
else { /* repeat instruction */
len = 0; /* assume repeating zeros */
if (symbol == 16) { /* repeat last length 3..6 times */
if (index == 0) return -5; /* no last length! */
if (index == 0)
return -5; /* no last length! */
len = lengths[index - 1]; /* last length */
symbol = 3 + bits(s, 2);
}
@@ -710,13 +731,13 @@ local int dynamic(struct state *s)
/* build huffman table for literal/length codes */
err = construct(&lencode, lengths, nlen);
if (err < 0 || (err > 0 && nlen - lencode.count[0] != 1))
return -7; /* only allow incomplete codes if just one code */
if (err && (err < 0 || nlen != lencode.count[0] + lencode.count[1]))
return -7; /* incomplete code ok only for single length 1 code */
/* build huffman table for distance codes */
err = construct(&distcode, lengths + nlen, ndist);
if (err < 0 || (err > 0 && ndist - distcode.count[0] != 1))
return -8; /* only allow incomplete codes if just one code */
if (err && (err < 0 || ndist != distcode.count[0] + distcode.count[1]))
return -8; /* incomplete code ok only for single length 1 code */
/* decode data until end-of-block code */
return codes(s, &lencode, &distcode);
@@ -768,7 +789,7 @@ local int dynamic(struct state *s)
*/
int puff(unsigned char *dest, /* pointer to destination pointer */
unsigned long *destlen, /* amount of output space */
unsigned char *source, /* pointer to source data pointer */
const unsigned char *source, /* pointer to source data pointer */
unsigned long *sourcelen) /* amount of input available */
{
struct state s; /* input/output state */
@@ -795,11 +816,15 @@ int puff(unsigned char *dest, /* pointer to destination pointer */
do {
last = bits(&s, 1); /* one if last block */
type = bits(&s, 2); /* block type 0..3 */
err = type == 0 ? stored(&s) :
(type == 1 ? fixed(&s) :
(type == 2 ? dynamic(&s) :
-1)); /* type == 3, invalid */
if (err != 0) break; /* return with error */
err = type == 0 ?
stored(&s) :
(type == 1 ?
fixed(&s) :
(type == 2 ?
dynamic(&s) :
-1)); /* type == 3, invalid */
if (err != 0)
break; /* return with error */
} while (!last);
}
@@ -810,146 +835,3 @@ int puff(unsigned char *dest, /* pointer to destination pointer */
}
return err;
}
#ifdef TEST
/* Examples of how to use puff().
Usage: puff [-w] [-nnn] file
... | puff [-w] [-nnn]
where file is the input file with deflate data, nnn is the number of bytes
of input to skip before inflating (e.g. to skip a zlib or gzip header), and
-w is used to write the decompressed data to stdout */
#include <stdio.h>
#include <stdlib.h>
/* Return size times approximately the cube root of 2, keeping the result as 1,
3, or 5 times a power of 2 -- the result is always > size, until the result
is the maximum value of an unsigned long, where it remains. This is useful
to keep reallocations less than ~33% over the actual data. */
local size_t bythirds(size_t size)
{
int n;
size_t m;
m = size;
for (n = 0; m; n++)
m >>= 1;
if (n < 3)
return size + 1;
n -= 3;
m = size >> n;
m += m == 6 ? 2 : 1;
m <<= n;
return m > size ? m : (size_t)(-1);
}
/* Read the input file *name, or stdin if name is NULL, into allocated memory.
Reallocate to larger buffers until the entire file is read in. Return a
pointer to the allocated data, or NULL if there was a memory allocation
failure. *len is the number of bytes of data read from the input file (even
if load() returns NULL). If the input file was empty or could not be opened
or read, *len is zero. */
local void *load(char *name, size_t *len)
{
size_t size;
void *buf, *swap;
FILE *in;
*len = 0;
buf = malloc(size = 4096);
if (buf == NULL)
return NULL;
in = name == NULL ? stdin : fopen(name, "rb");
if (in != NULL) {
for (;;) {
*len += fread((char *)buf + *len, 1, size - *len, in);
if (*len < size) break;
size = bythirds(size);
if (size == *len || (swap = realloc(buf, size)) == NULL) {
free(buf);
buf = NULL;
break;
}
buf = swap;
}
fclose(in);
}
return buf;
}
int main(int argc, char **argv)
{
int ret, put = 0;
unsigned skip = 0;
char *arg, *name = NULL;
unsigned char *source = NULL, *dest;
size_t len = 0;
unsigned long sourcelen, destlen;
/* process arguments */
while (arg = *++argv, --argc)
if (arg[0] == '-') {
if (arg[1] == 'w' && arg[2] == 0)
put = 1;
else if (arg[1] >= '0' && arg[1] <= '9')
skip = (unsigned)atoi(arg + 1);
else {
fprintf(stderr, "invalid option %s\n", arg);
return 3;
}
}
else if (name != NULL) {
fprintf(stderr, "only one file name allowed\n");
return 3;
}
else
name = arg;
source = load(name, &len);
if (source == NULL) {
fprintf(stderr, "memory allocation failure\n");
return 4;
}
if (len == 0) {
fprintf(stderr, "could not read %s, or it was empty\n",
name == NULL ? "<stdin>" : name);
free(source);
return 3;
}
if (skip >= len) {
fprintf(stderr, "skip request of %d leaves no input\n", skip);
free(source);
return 3;
}
/* test inflate data with offset skip */
len -= skip;
sourcelen = (unsigned long)len;
ret = puff(NIL, &destlen, source + skip, &sourcelen);
if (ret)
fprintf(stderr, "puff() failed with return code %d\n", ret);
else {
fprintf(stderr, "puff() succeeded uncompressing %lu bytes\n", destlen);
if (sourcelen < len) fprintf(stderr, "%lu compressed bytes unused\n",
len - sourcelen);
}
/* if requested, inflate again and write decompressd data to stdout */
if (put) {
dest = malloc(destlen);
if (dest == NULL) {
fprintf(stderr, "memory allocation failure\n");
free(source);
return 4;
}
puff(dest, &destlen, source + skip, &sourcelen);
fwrite(dest, 1, destlen, stdout);
free(dest);
}
/* clean up */
free(source);
return ret;
}
#endif

View File

@@ -1,6 +1,6 @@
/* puff.h
Copyright (C) 2002-2010 Mark Adler, all rights reserved
version 2.1, 4 Apr 2010
version 2.2, 25 Apr 2010
This software is provided 'as-is', without any express or implied
warranty. In no event will the author be held liable for any damages
@@ -25,7 +25,11 @@
/*
* See puff.c for purpose and usage.
*/
#ifndef NIL
# define NIL ((unsigned char *)0) /* for no output option */
#endif
int puff(unsigned char *dest, /* pointer to destination pointer */
unsigned long *destlen, /* amount of output space */
unsigned char *source, /* pointer to source data pointer */
const unsigned char *source, /* pointer to source data pointer */
unsigned long *sourcelen); /* amount of input available */

165
contrib/puff/pufftest.c Normal file
View File

@@ -0,0 +1,165 @@
/*
* pufftest.c
* Copyright (C) 2002-2010 Mark Adler
* For conditions of distribution and use, see copyright notice in puff.h
* version 2.2, 25 Apr 2010
*/
/* Example of how to use puff().
Usage: puff [-w] [-f] [-nnn] file
... | puff [-w] [-f] [-nnn]
where file is the input file with deflate data, nnn is the number of bytes
of input to skip before inflating (e.g. to skip a zlib or gzip header), and
-w is used to write the decompressed data to stdout. -f is for coverage
testing, and causes pufftest to fail with not enough output space (-f does
a write like -w, so -w is not required). */
#include <stdio.h>
#include <stdlib.h>
#include "puff.h"
#if defined(MSDOS) || defined(OS2) || defined(WIN32) || defined(__CYGWIN__)
# include <fcntl.h>
# include <io.h>
# define SET_BINARY_MODE(file) setmode(fileno(file), O_BINARY)
#else
# define SET_BINARY_MODE(file)
#endif
#define local static
/* Return size times approximately the cube root of 2, keeping the result as 1,
3, or 5 times a power of 2 -- the result is always > size, until the result
is the maximum value of an unsigned long, where it remains. This is useful
to keep reallocations less than ~33% over the actual data. */
local size_t bythirds(size_t size)
{
int n;
size_t m;
m = size;
for (n = 0; m; n++)
m >>= 1;
if (n < 3)
return size + 1;
n -= 3;
m = size >> n;
m += m == 6 ? 2 : 1;
m <<= n;
return m > size ? m : (size_t)(-1);
}
/* Read the input file *name, or stdin if name is NULL, into allocated memory.
Reallocate to larger buffers until the entire file is read in. Return a
pointer to the allocated data, or NULL if there was a memory allocation
failure. *len is the number of bytes of data read from the input file (even
if load() returns NULL). If the input file was empty or could not be opened
or read, *len is zero. */
local void *load(const char *name, size_t *len)
{
size_t size;
void *buf, *swap;
FILE *in;
*len = 0;
buf = malloc(size = 4096);
if (buf == NULL)
return NULL;
in = name == NULL ? stdin : fopen(name, "rb");
if (in != NULL) {
for (;;) {
*len += fread((char *)buf + *len, 1, size - *len, in);
if (*len < size) break;
size = bythirds(size);
if (size == *len || (swap = realloc(buf, size)) == NULL) {
free(buf);
buf = NULL;
break;
}
buf = swap;
}
fclose(in);
}
return buf;
}
int main(int argc, char **argv)
{
int ret, put = 0, fail = 0;
unsigned skip = 0;
char *arg, *name = NULL;
unsigned char *source = NULL, *dest;
size_t len = 0;
unsigned long sourcelen, destlen;
/* process arguments */
while (arg = *++argv, --argc)
if (arg[0] == '-') {
if (arg[1] == 'w' && arg[2] == 0)
put = 1;
else if (arg[1] == 'f' && arg[2] == 0)
fail = 1, put = 1;
else if (arg[1] >= '0' && arg[1] <= '9')
skip = (unsigned)atoi(arg + 1);
else {
fprintf(stderr, "invalid option %s\n", arg);
return 3;
}
}
else if (name != NULL) {
fprintf(stderr, "only one file name allowed\n");
return 3;
}
else
name = arg;
source = load(name, &len);
if (source == NULL) {
fprintf(stderr, "memory allocation failure\n");
return 4;
}
if (len == 0) {
fprintf(stderr, "could not read %s, or it was empty\n",
name == NULL ? "<stdin>" : name);
free(source);
return 3;
}
if (skip >= len) {
fprintf(stderr, "skip request of %d leaves no input\n", skip);
free(source);
return 3;
}
/* test inflate data with offset skip */
len -= skip;
sourcelen = (unsigned long)len;
ret = puff(NIL, &destlen, source + skip, &sourcelen);
if (ret)
fprintf(stderr, "puff() failed with return code %d\n", ret);
else {
fprintf(stderr, "puff() succeeded uncompressing %lu bytes\n", destlen);
if (sourcelen < len) fprintf(stderr, "%lu compressed bytes unused\n",
len - sourcelen);
}
/* if requested, inflate again and write decompressd data to stdout */
if (put && ret == 0) {
if (fail)
destlen >>= 1;
dest = malloc(destlen);
if (dest == NULL) {
fprintf(stderr, "memory allocation failure\n");
free(source);
return 4;
}
puff(dest, &destlen, source + skip, &sourcelen);
SET_BINARY_MODE(stdout);
fwrite(dest, 1, destlen, stdout);
free(dest);
}
/* clean up */
free(source);
return ret;
}

Binary file not shown.

View File

@@ -2,8 +2,8 @@
#define IDR_VERSION1 1
IDR_VERSION1 VERSIONINFO MOVEABLE IMPURE LOADONCALL DISCARDABLE
FILEVERSION 1,2,4,2
PRODUCTVERSION 1,2,4,2
FILEVERSION 1.2.5.1,1
PRODUCTVERSION 1.2.5.1,1
FILEFLAGSMASK VS_FFI_FILEFLAGSMASK
FILEFLAGS 0
FILEOS VOS_DOS_WINDOWS32
@@ -17,7 +17,7 @@ BEGIN
BEGIN
VALUE "FileDescription", "zlib data compression and ZIP file I/O library\0"
VALUE "FileVersion", "1.2.4.2\0"
VALUE "FileVersion", "1.2.5.1\0"
VALUE "InternalName", "zlib\0"
VALUE "OriginalFilename", "zlib.dll\0"
VALUE "ProductName", "ZLib.DLL\0"

View File

@@ -55,6 +55,7 @@ EXPORTS
gzungetc @49
zlibCompileFlags @50
deflatePrime @51
deflatePending @52
unzOpen @61
unzClose @62

View File

@@ -2,8 +2,8 @@
#define IDR_VERSION1 1
IDR_VERSION1 VERSIONINFO MOVEABLE IMPURE LOADONCALL DISCARDABLE
FILEVERSION 1,2,4,2
PRODUCTVERSION 1,2,4,2
FILEVERSION 1.2.5.1,1
PRODUCTVERSION 1.2.5.1,1
FILEFLAGSMASK VS_FFI_FILEFLAGSMASK
FILEFLAGS 0
FILEOS VOS_DOS_WINDOWS32
@@ -17,7 +17,7 @@ BEGIN
BEGIN
VALUE "FileDescription", "zlib data compression and ZIP file I/O library\0"
VALUE "FileVersion", "1.2.4.2\0"
VALUE "FileVersion", "1.2.5.1\0"
VALUE "InternalName", "zlib\0"
VALUE "OriginalFilename", "zlib.dll\0"
VALUE "ProductName", "ZLib.DLL\0"

View File

@@ -55,6 +55,7 @@ EXPORTS
gzungetc @49
zlibCompileFlags @50
deflatePrime @51
deflatePending @52
unzOpen @61
unzClose @62

31
crc32.c
View File

@@ -1,5 +1,5 @@
/* crc32.c -- compute the CRC-32 of a data stream
* Copyright (C) 1995-2006 Mark Adler
* Copyright (C) 1995-2006, 2010, 2011 Mark Adler
* For conditions of distribution and use, see copyright notice in zlib.h
*
* Thanks to Rodney Brown <rbrown64@csc.com.au> for his contribution of faster
@@ -17,6 +17,8 @@
of the crc tables. Therefore, if you #define DYNAMIC_CRC_TABLE, you should
first call get_crc_table() to initialize the tables before allowing more than
one thread to use crc32().
DYNAMIC_CRC_TABLE and MAKECRCH can be #defined to write out crc32.h.
*/
#ifdef MAKECRCH
@@ -53,6 +55,7 @@
/* Definitions for doing the crc four data bytes at a time. */
#ifdef BYFOUR
typedef u4 crc_table_t;
# define REV(w) ((((w)>>24)&0xff)+(((w)>>8)&0xff00)+ \
(((w)&0xff00)<<8)+(((w)&0xff)<<24))
local unsigned long crc32_little OF((unsigned long,
@@ -61,6 +64,7 @@
const unsigned char FAR *, unsigned));
# define TBLS 8
#else
typedef unsigned long crc_table_t;
# define TBLS 1
#endif /* BYFOUR */
@@ -68,16 +72,16 @@
local unsigned long gf2_matrix_times OF((unsigned long *mat,
unsigned long vec));
local void gf2_matrix_square OF((unsigned long *square, unsigned long *mat));
local uLong crc32_combine_(uLong crc1, uLong crc2, z_off64_t len2);
local uLong crc32_combine_ OF((uLong crc1, uLong crc2, z_off64_t len2));
#ifdef DYNAMIC_CRC_TABLE
local volatile int crc_table_empty = 1;
local unsigned long FAR crc_table[TBLS][256];
local crc_table_t FAR crc_table[TBLS][256];
local void make_crc_table OF((void));
#ifdef MAKECRCH
local void write_table OF((FILE *, const unsigned long FAR *));
local void write_table OF((FILE *, const crc_table_t FAR *));
#endif /* MAKECRCH */
/*
Generate tables for a byte-wise 32-bit CRC calculation on the polynomial:
@@ -107,9 +111,9 @@ local void make_crc_table OF((void));
*/
local void make_crc_table()
{
unsigned long c;
crc_table_t c;
int n, k;
unsigned long poly; /* polynomial exclusive-or pattern */
crc_table_t poly; /* polynomial exclusive-or pattern */
/* terms of polynomial defining this crc (except x^32): */
static volatile int first = 1; /* flag to limit concurrent making */
static const unsigned char p[] = {0,1,2,4,5,7,8,10,11,12,16,22,23,26};
@@ -121,13 +125,13 @@ local void make_crc_table()
first = 0;
/* make exclusive-or pattern from polynomial (0xedb88320UL) */
poly = 0UL;
for (n = 0; n < sizeof(p)/sizeof(unsigned char); n++)
poly |= 1UL << (31 - p[n]);
poly = 0;
for (n = 0; n < (int)(sizeof(p)/sizeof(unsigned char)); n++)
poly |= (crc_table_t)1 << (31 - p[n]);
/* generate a crc for every 8-bit value */
for (n = 0; n < 256; n++) {
c = (unsigned long)n;
c = (crc_table_t)n;
for (k = 0; k < 8; k++)
c = c & 1 ? poly ^ (c >> 1) : c >> 1;
crc_table[0][n] = c;
@@ -164,7 +168,7 @@ local void make_crc_table()
if (out == NULL) return;
fprintf(out, "/* crc32.h -- tables for rapid CRC calculation\n");
fprintf(out, " * Generated automatically by crc32.c\n */\n\n");
fprintf(out, "local const unsigned long FAR ");
fprintf(out, "local const crc_table_t FAR ");
fprintf(out, "crc_table[TBLS][256] =\n{\n {\n");
write_table(out, crc_table[0]);
# ifdef BYFOUR
@@ -184,12 +188,13 @@ local void make_crc_table()
#ifdef MAKECRCH
local void write_table(out, table)
FILE *out;
const unsigned long FAR *table;
const crc_table_t FAR *table;
{
int n;
for (n = 0; n < 256; n++)
fprintf(out, "%s0x%08lxUL%s", n % 5 ? "" : " ", table[n],
fprintf(out, "%s0x%08lxUL%s", n % 5 ? "" : " ",
(unsigned long)(table[n]),
n == 255 ? "\n" : (n % 5 == 4 ? ",\n" : ", "));
}
#endif /* MAKECRCH */

View File

@@ -2,7 +2,7 @@
* Generated automatically by crc32.c
*/
local const unsigned long FAR crc_table[TBLS][256] =
local const crc_table_t FAR crc_table[TBLS][256] =
{
{
0x00000000UL, 0x77073096UL, 0xee0e612cUL, 0x990951baUL, 0x076dc419UL,

View File

@@ -1,5 +1,5 @@
/* deflate.c -- compress data using the deflation algorithm
* Copyright (C) 1995-2010 Jean-loup Gailly and Mark Adler
* Copyright (C) 1995-2011 Jean-loup Gailly and Mark Adler
* For conditions of distribution and use, see copyright notice in zlib.h
*/
@@ -37,7 +37,7 @@
* REFERENCES
*
* Deutsch, L.P.,"DEFLATE Compressed Data Format Specification".
* Available in http://www.ietf.org/rfc/rfc1951.txt
* Available in http://tools.ietf.org/html/rfc1951
*
* A description of the Rabin and Karp algorithm is given in the book
* "Algorithms" by R. Sedgewick, Addison-Wesley, p252.
@@ -52,7 +52,7 @@
#include "deflate.h"
const char deflate_copyright[] =
" deflate 1.2.4.2 Copyright 1995-2010 Jean-loup Gailly and Mark Adler ";
" deflate 1.2.5.1 Copyright 1995-2010 Jean-loup Gailly and Mark Adler ";
/*
If you use the zlib library in a product, an acknowledgment is welcome
in the documentation of your product. If for some reason you cannot
@@ -396,6 +396,18 @@ int ZEXPORT deflateSetHeader (strm, head)
return Z_OK;
}
/* ========================================================================= */
int ZEXPORT deflatePending (strm, pending, bits)
unsigned *pending;
int *bits;
z_streamp strm;
{
if (strm == Z_NULL || strm->state == Z_NULL) return Z_STREAM_ERROR;
*pending = strm->state->pending;
*bits = strm->state->bi_valid;
return Z_OK;
}
/* ========================================================================= */
int ZEXPORT deflatePrime (strm, bits, value)
z_streamp strm;
@@ -1001,15 +1013,15 @@ local int read_buf(strm, buf, size)
strm->avail_in -= len;
zmemcpy(buf, strm->next_in, len);
if (strm->state->wrap == 1) {
strm->adler = adler32(strm->adler, strm->next_in, len);
strm->adler = adler32(strm->adler, buf, len);
}
#ifdef GZIP
else if (strm->state->wrap == 2) {
strm->adler = crc32(strm->adler, strm->next_in, len);
strm->adler = crc32(strm->adler, buf, len);
}
#endif
zmemcpy(buf, strm->next_in, len);
strm->next_in += len;
strm->total_in += len;

View File

@@ -1,5 +1,5 @@
/* deflate.h -- internal compression state
* Copyright (C) 1995-2009 Jean-loup Gailly
* Copyright (C) 1995-2010 Jean-loup Gailly
* For conditions of distribution and use, see copyright notice in zlib.h
*/
@@ -188,7 +188,7 @@ typedef struct internal_state {
int nice_match; /* Stop searching when current match exceeds this */
/* used by trees.c: */
/* Didn't use ct_data typedef below to supress compiler warning */
/* Didn't use ct_data typedef below to suppress compiler warning */
struct ct_data_s dyn_ltree[HEAP_SIZE]; /* literal and length tree */
struct ct_data_s dyn_dtree[2*D_CODES+1]; /* distance tree */
struct ct_data_s bl_tree[2*BL_CODES+1]; /* Huffman tree for bit lengths */
@@ -290,13 +290,13 @@ typedef struct internal_state {
memory checker errors from longest match routines */
/* in trees.c */
void _tr_init OF((deflate_state *s));
int _tr_tally OF((deflate_state *s, unsigned dist, unsigned lc));
void _tr_flush_block OF((deflate_state *s, charf *buf, ulg stored_len,
int last));
void _tr_align OF((deflate_state *s));
void _tr_stored_block OF((deflate_state *s, charf *buf, ulg stored_len,
int last));
void ZLIB_INTERNAL _tr_init OF((deflate_state *s));
int ZLIB_INTERNAL _tr_tally OF((deflate_state *s, unsigned dist, unsigned lc));
void ZLIB_INTERNAL _tr_flush_block OF((deflate_state *s, charf *buf,
ulg stored_len, int last));
void ZLIB_INTERNAL _tr_align OF((deflate_state *s));
void ZLIB_INTERNAL _tr_stored_block OF((deflate_state *s, charf *buf,
ulg stored_len, int last));
#define d_code(dist) \
((dist) < 256 ? _dist_code[dist] : _dist_code[256+((dist)>>7)])
@@ -309,11 +309,11 @@ void _tr_stored_block OF((deflate_state *s, charf *buf, ulg stored_len,
/* Inline versions of _tr_tally for speed: */
#if defined(GEN_TREES_H) || !defined(STDC)
extern uch _length_code[];
extern uch _dist_code[];
extern uch ZLIB_INTERNAL _length_code[];
extern uch ZLIB_INTERNAL _dist_code[];
#else
extern const uch _length_code[];
extern const uch _dist_code[];
extern const uch ZLIB_INTERNAL _length_code[];
extern const uch ZLIB_INTERNAL _dist_code[];
#endif
# define _tr_tally_lit(s, c, flush) \

View File

@@ -206,4 +206,4 @@ Compression,'' IEEE Transactions on Information Theory, Vol. 23, No. 3,
pp. 337-343.
``DEFLATE Compressed Data Format Specification'' available in
http://www.ietf.org/rfc/rfc1951.txt
http://tools.ietf.org/html/rfc1951

View File

@@ -1,5 +1,5 @@
/* example.c -- usage example of the zlib compression library
* Copyright (C) 1995-2006 Jean-loup Gailly.
* Copyright (C) 1995-2006, 2011 Jean-loup Gailly.
* For conditions of distribution and use, see copyright notice in zlib.h
*/
@@ -438,7 +438,7 @@ void test_dict_deflate(compr, comprLen)
CHECK_ERR(err, "deflateInit");
err = deflateSetDictionary(&c_stream,
(const Bytef*)dictionary, sizeof(dictionary));
(const Bytef*)dictionary, (int)sizeof(dictionary));
CHECK_ERR(err, "deflateSetDictionary");
dictId = c_stream.adler;
@@ -491,7 +491,7 @@ void test_dict_inflate(compr, comprLen, uncompr, uncomprLen)
exit(1);
}
err = inflateSetDictionary(&d_stream, (const Bytef*)dictionary,
sizeof(dictionary));
(int)sizeof(dictionary));
}
CHECK_ERR(err, "inflate with dict");
}

View File

@@ -3,7 +3,7 @@
* For conditions of distribution and use, see copyright notice in zlib.h
*/
#if _LARGEFILE64_SOURCE
#ifdef _LARGEFILE64_SOURCE
# ifndef _LARGEFILE_SOURCE
# define _LARGEFILE_SOURCE 1
# endif
@@ -12,7 +12,11 @@
# endif
#endif
#define ZLIB_INTERNAL
#if ((__GNUC__-0) * 10 + __GNUC_MINOR__-0 >= 33) && !defined(NO_VIZ)
# define ZLIB_INTERNAL __attribute__((visibility ("hidden")))
#else
# define ZLIB_INTERNAL
#endif
#include <stdio.h>
#include "zlib.h"
@@ -56,18 +60,12 @@
# endif
#endif
#if _LARGEFILE64_SOURCE
# define z_off64_t off64_t
#else
# define z_off64_t z_off_t
#endif
/* provide prototypes for these when building zlib without LFS */
#if _LARGEFILE64_SOURCE+0 != 1 || _LFS64_LARGEFILE+0 != 1
#if !defined(_LARGEFILE64_SOURCE) || _LFS64_LARGEFILE-0 == 0
ZEXTERN gzFile ZEXPORT gzopen64 OF((const char *, const char *));
ZEXTERN z_off_t ZEXPORT gzseek64 OF((gzFile, off_t, int));
ZEXTERN z_off_t ZEXPORT gztell64 OF((gzFile));
ZEXTERN z_off_t ZEXPORT gzoffset64 OF((gzFile));
ZEXTERN z_off64_t ZEXPORT gzseek64 OF((gzFile, z_off64_t, int));
ZEXTERN z_off64_t ZEXPORT gztell64 OF((gzFile));
ZEXTERN z_off64_t ZEXPORT gzoffset64 OF((gzFile));
#endif
/* default i/o buffer size -- double this for output when reading */
@@ -118,9 +116,9 @@ typedef struct {
typedef gz_state FAR *gz_statep;
/* shared functions */
ZEXTERN void ZEXPORT gz_error OF((gz_statep, int, const char *));
void ZLIB_INTERNAL gz_error OF((gz_statep, int, const char *));
#if defined UNDER_CE
ZEXTERN char ZEXPORT *gz_strwinerror OF((DWORD error));
char ZLIB_INTERNAL *gz_strwinerror OF((DWORD error));
#endif
/* GT_OFF(x), where x is an unsigned value, is true if x > maximum z_off64_t
@@ -129,6 +127,6 @@ ZEXTERN char ZEXPORT *gz_strwinerror OF((DWORD error));
#ifdef INT_MAX
# define GT_OFF(x) (sizeof(int) == sizeof(z_off64_t) && (x) > INT_MAX)
#else
ZEXTERN unsigned ZEXPORT gz_intmax OF((void));
unsigned ZLIB_INTERNAL gz_intmax OF((void));
# define GT_OFF(x) (sizeof(int) == sizeof(z_off64_t) && (x) > gz_intmax())
#endif

12
gzlib.c
View File

@@ -5,7 +5,7 @@
#include "gzguts.h"
#if _LARGEFILE64_SOURCE && _LFS64_LARGEFILE
#if defined(_LARGEFILE64_SOURCE) && _LFS64_LARGEFILE-0
# define LSEEK lseek64
#else
# define LSEEK lseek
@@ -26,7 +26,7 @@ local gzFile gz_open OF((const char *, int, const char *));
The gz_strwinerror function does not change the current setting of
GetLastError. */
char ZEXPORT *gz_strwinerror (error)
char ZLIB_INTERNAL *gz_strwinerror (error)
DWORD error;
{
static char buf[1024];
@@ -91,6 +91,10 @@ local gzFile gz_open(path, fd, mode)
{
gz_statep state;
/* check input */
if (path == NULL)
return NULL;
/* allocate gzFile structure to return */
state = malloc(sizeof(gz_state));
if (state == NULL)
@@ -482,7 +486,7 @@ void ZEXPORT gzclearerr(file)
memory). Simply save the error message as a static string. If there is an
allocation failure constructing the error message, then convert the error to
out of memory. */
void ZEXPORT gz_error(state, err, msg)
void ZLIB_INTERNAL gz_error(state, err, msg)
gz_statep state;
int err;
const char *msg;
@@ -522,7 +526,7 @@ void ZEXPORT gz_error(state, err, msg)
available) -- we need to do this to cover cases where 2's complement not
used, since C standard permits 1's complement and sign-bit representations,
otherwise we could just use ((unsigned)-1) >> 1 */
unsigned ZEXPORT gz_intmax()
unsigned ZLIB_INTERNAL gz_intmax()
{
unsigned p, q;

View File

@@ -1,5 +1,5 @@
/* gzwrite.c -- zlib functions for writing gzip files
* Copyright (C) 2004, 2005, 2010 Mark Adler
* Copyright (C) 2004, 2005, 2010, 2011 Mark Adler
* For conditions of distribution and use, see copyright notice in zlib.h
*/
@@ -274,7 +274,7 @@ int ZEXPORT gzputs(file, str)
return ret == 0 && len != 0 ? -1 : ret;
}
#ifdef STDC
#if defined(STDC) || defined(Z_HAVE_STDARG_H)
#include <stdarg.h>
/* -- see zlib.h -- */
@@ -346,7 +346,7 @@ int ZEXPORTVA gzprintf (gzFile file, const char *format, ...)
return len;
}
#else /* !STDC */
#else /* !STDC && !Z_HAVE_STDARG_H */
/* -- see zlib.h -- */
int ZEXPORTVA gzprintf (file, format, a1, a2, a3, a4, a5, a6, a7, a8, a9, a10,
@@ -366,6 +366,10 @@ int ZEXPORTVA gzprintf (file, format, a1, a2, a3, a4, a5, a6, a7, a8, a9, a10,
state = (gz_statep)file;
strm = &(state->strm);
/* check that can really pass pointer in ints */
if (sizeof(int) != sizeof(void *))
return 0;
/* check that we're writing and that there's no error */
if (state->mode != GZ_WRITE || state->err != Z_OK)
return 0;

View File

@@ -1,5 +1,5 @@
/* inffast.c -- fast decoding
* Copyright (C) 1995-2008 Mark Adler
* Copyright (C) 1995-2008, 2010 Mark Adler
* For conditions of distribution and use, see copyright notice in zlib.h
*/
@@ -64,7 +64,7 @@
requires strm->avail_out >= 258 for each loop to avoid checking for
output space.
*/
void inflate_fast(strm, start)
void ZLIB_INTERNAL inflate_fast(strm, start)
z_streamp strm;
unsigned start; /* inflate()'s starting value for strm->avail_out */
{

View File

@@ -1,5 +1,5 @@
/* inffast.h -- header to use inffast.c
* Copyright (C) 1995-2003 Mark Adler
* Copyright (C) 1995-2003, 2010 Mark Adler
* For conditions of distribution and use, see copyright notice in zlib.h
*/
@@ -8,4 +8,4 @@
subject to change. Applications should only use zlib.h.
*/
void inflate_fast OF((z_streamp strm, unsigned start));
void ZLIB_INTERNAL inflate_fast OF((z_streamp strm, unsigned start));

View File

@@ -9,7 +9,7 @@
#define MAXBITS 15
const char inflate_copyright[] =
" inflate 1.2.4.2 Copyright 1995-2010 Mark Adler ";
" inflate 1.2.5.1 Copyright 1995-2010 Mark Adler ";
/*
If you use the zlib library in a product, an acknowledgment is welcome
in the documentation of your product. If for some reason you cannot
@@ -29,7 +29,7 @@ const char inflate_copyright[] =
table index bits. It will differ if the request is greater than the
longest code or if it is less than the shortest code.
*/
int inflate_table(type, lens, codes, table, bits, work)
int ZLIB_INTERNAL inflate_table(type, lens, codes, table, bits, work)
codetype type;
unsigned short FAR *lens;
unsigned codes;
@@ -62,7 +62,7 @@ unsigned short FAR *work;
35, 43, 51, 59, 67, 83, 99, 115, 131, 163, 195, 227, 258, 0, 0};
static const unsigned short lext[31] = { /* Length codes 257..285 extra */
16, 16, 16, 16, 16, 16, 16, 16, 17, 17, 17, 17, 18, 18, 18, 18,
19, 19, 19, 19, 20, 20, 20, 20, 21, 21, 21, 21, 16, 202, 75};
19, 19, 19, 19, 20, 20, 20, 20, 21, 21, 21, 21, 16, 205, 203};
static const unsigned short dbase[32] = { /* Distance codes 0..29 base */
1, 2, 3, 4, 5, 7, 9, 13, 17, 25, 33, 49, 65, 97, 129, 193,
257, 385, 513, 769, 1025, 1537, 2049, 3073, 4097, 6145,

View File

@@ -1,5 +1,5 @@
/* inftrees.h -- header to use inftrees.c
* Copyright (C) 1995-2005 Mark Adler
* Copyright (C) 1995-2005, 2010 Mark Adler
* For conditions of distribution and use, see copyright notice in zlib.h
*/
@@ -57,6 +57,6 @@ typedef enum {
DISTS
} codetype;
extern int inflate_table OF((codetype type, unsigned short FAR *lens,
int ZLIB_INTERNAL inflate_table OF((codetype type, unsigned short FAR *lens,
unsigned codes, code FAR * FAR *table,
unsigned FAR *bits, unsigned short FAR *work));

View File

@@ -53,7 +53,7 @@
# include <unix.h> /* for fileno */
#endif
#if !defined(Z_HAVE_UNISTD_H) && _LARGEFILE64_SOURCE+0 != 1
#if !defined(Z_HAVE_UNISTD_H) && !defined(_LARGEFILE64_SOURCE)
#ifndef WIN32 /* unlink already in stdio.h for WIN32 */
extern int unlink OF((const char *));
#endif

View File

@@ -1,123 +0,0 @@
/******************************************************************************/
/* */
/* ZLIB */
/* */
/* Compile sources into modules and link them into a service program. */
/* */
/******************************************************************************/
PGM
/* Configuration adjustable parameters. */
DCL VAR(&SRCLIB) TYPE(*CHAR) LEN(10) +
VALUE('ZLIB') /* Source library. */
DCL VAR(&SRCFILE) TYPE(*CHAR) LEN(10) +
VALUE('SOURCES') /* Source member file. */
DCL VAR(&CTLFILE) TYPE(*CHAR) LEN(10) +
VALUE('TOOLS') /* Control member file. */
DCL VAR(&MODLIB) TYPE(*CHAR) LEN(10) +
VALUE('ZLIB') /* Module library. */
DCL VAR(&SRVLIB) TYPE(*CHAR) LEN(10) +
VALUE('LGPL') /* Service program library. */
DCL VAR(&CFLAGS) TYPE(*CHAR) +
VALUE('OPTIMIZE(40)') /* Compile options. */
/* Working storage. */
DCL VAR(&CMDLEN) TYPE(*DEC) LEN(15 5) VALUE(300) /* Command length. */
DCL VAR(&CMD) TYPE(*CHAR) LEN(512)
/* Compile sources into modules. */
CHGVAR VAR(&CMD) VALUE('CRTCMOD MODULE(' *TCAT &MODLIB *TCAT +
'/ADLER32) SRCFILE(' *TCAT +
&SRCLIB *TCAT '/' *TCAT &SRCFILE *TCAT +
') SYSIFCOPT(*IFSIO)' *BCAT &CFLAGS)
CALL PGM(QCMDEXC) PARM(&CMD &CMDLEN)
CHGVAR VAR(&CMD) VALUE('CRTCMOD MODULE(' *TCAT &MODLIB *TCAT +
'/COMPRESS) SRCFILE(' *TCAT +
&SRCLIB *TCAT '/' *TCAT &SRCFILE *TCAT +
') SYSIFCOPT(*IFSIO)' *BCAT &CFLAGS)
CALL PGM(QCMDEXC) PARM(&CMD &CMDLEN)
CHGVAR VAR(&CMD) VALUE('CRTCMOD MODULE(' *TCAT &MODLIB *TCAT +
'/CRC32) SRCFILE(' *TCAT +
&SRCLIB *TCAT '/' *TCAT &SRCFILE *TCAT +
') SYSIFCOPT(*IFSIO)' *BCAT &CFLAGS)
CALL PGM(QCMDEXC) PARM(&CMD &CMDLEN)
CHGVAR VAR(&CMD) VALUE('CRTCMOD MODULE(' *TCAT &MODLIB *TCAT +
'/DEFLATE) SRCFILE(' *TCAT +
&SRCLIB *TCAT '/' *TCAT &SRCFILE *TCAT +
') SYSIFCOPT(*IFSIO)' *BCAT &CFLAGS)
CALL PGM(QCMDEXC) PARM(&CMD &CMDLEN)
CHGVAR VAR(&CMD) VALUE('CRTCMOD MODULE(' *TCAT &MODLIB *TCAT +
'/GZIO) SRCFILE(' *TCAT +
&SRCLIB *TCAT '/' *TCAT &SRCFILE *TCAT +
') SYSIFCOPT(*IFSIO)' *BCAT &CFLAGS)
CALL PGM(QCMDEXC) PARM(&CMD &CMDLEN)
CHGVAR VAR(&CMD) VALUE('CRTCMOD MODULE(' *TCAT &MODLIB *TCAT +
'/INFBACK) SRCFILE(' *TCAT +
&SRCLIB *TCAT '/' *TCAT &SRCFILE *TCAT +
') SYSIFCOPT(*IFSIO)' *BCAT &CFLAGS)
CALL PGM(QCMDEXC) PARM(&CMD &CMDLEN)
CHGVAR VAR(&CMD) VALUE('CRTCMOD MODULE(' *TCAT &MODLIB *TCAT +
'/INFFAST) SRCFILE(' *TCAT +
&SRCLIB *TCAT '/' *TCAT &SRCFILE *TCAT +
') SYSIFCOPT(*IFSIO)' *BCAT &CFLAGS)
CALL PGM(QCMDEXC) PARM(&CMD &CMDLEN)
CHGVAR VAR(&CMD) VALUE('CRTCMOD MODULE(' *TCAT &MODLIB *TCAT +
'/INFLATE) SRCFILE(' *TCAT +
&SRCLIB *TCAT '/' *TCAT &SRCFILE *TCAT +
') SYSIFCOPT(*IFSIO)' *BCAT &CFLAGS)
CALL PGM(QCMDEXC) PARM(&CMD &CMDLEN)
CHGVAR VAR(&CMD) VALUE('CRTCMOD MODULE(' *TCAT &MODLIB *TCAT +
'/INFTREES) SRCFILE(' *TCAT +
&SRCLIB *TCAT '/' *TCAT &SRCFILE *TCAT +
') SYSIFCOPT(*IFSIO)' *BCAT &CFLAGS)
CALL PGM(QCMDEXC) PARM(&CMD &CMDLEN)
CHGVAR VAR(&CMD) VALUE('CRTCMOD MODULE(' *TCAT &MODLIB *TCAT +
'/TREES) SRCFILE(' *TCAT +
&SRCLIB *TCAT '/' *TCAT &SRCFILE *TCAT +
') SYSIFCOPT(*IFSIO)' *BCAT &CFLAGS)
CALL PGM(QCMDEXC) PARM(&CMD &CMDLEN)
CHGVAR VAR(&CMD) VALUE('CRTCMOD MODULE(' *TCAT &MODLIB *TCAT +
'/UNCOMPR) SRCFILE(' *TCAT +
&SRCLIB *TCAT '/' *TCAT &SRCFILE *TCAT +
') SYSIFCOPT(*IFSIO)' *BCAT &CFLAGS)
CALL PGM(QCMDEXC) PARM(&CMD &CMDLEN)
CHGVAR VAR(&CMD) VALUE('CRTCMOD MODULE(' *TCAT &MODLIB *TCAT +
'/ZUTIL) SRCFILE(' *TCAT +
&SRCLIB *TCAT '/' *TCAT &SRCFILE *TCAT +
') SYSIFCOPT(*IFSIO)' *BCAT &CFLAGS)
CALL PGM(QCMDEXC) PARM(&CMD &CMDLEN)
/* Link modules into a service program. */
CRTSRVPGM SRVPGM(&SRVLIB/ZLIB) +
MODULE(&MODLIB/ADLER32 &MODLIB/COMPRESS +
&MODLIB/CRC32 &MODLIB/DEFLATE +
&MODLIB/GZIO &MODLIB/INFBACK +
&MODLIB/INFFAST &MODLIB/INFLATE +
&MODLIB/INFTREES &MODLIB/TREES +
&MODLIB/UNCOMPR &MODLIB/ZUTIL) +
SRCFILE(&SRCLIB/&CTLFILE) SRCMBR(BNDSRC) +
TEXT('ZLIB 1.2.3') TGTRLS(V4R4M0)
ENDPGM

View File

@@ -25,10 +25,10 @@
<QPG:Files>
<QPG:Add file="../zconf.h" install="/opt/include/" user="root:sys" permission="644"/>
<QPG:Add file="../zlib.h" install="/opt/include/" user="root:sys" permission="644"/>
<QPG:Add file="../libz.so.1.2.4.2" install="/opt/lib/" user="root:bin" permission="644"/>
<QPG:Add file="libz.so" install="/opt/lib/" component="dev" filetype="symlink" linkto="libz.so.1.2.4.2"/>
<QPG:Add file="libz.so.1" install="/opt/lib/" filetype="symlink" linkto="libz.so.1.2.4.2"/>
<QPG:Add file="../libz.so.1.2.4.2" install="/opt/lib/" component="slib"/>
<QPG:Add file="../libz.so.1.2.5.1" install="/opt/lib/" user="root:bin" permission="644"/>
<QPG:Add file="libz.so" install="/opt/lib/" component="dev" filetype="symlink" linkto="libz.so.1.2.5.1"/>
<QPG:Add file="libz.so.1" install="/opt/lib/" filetype="symlink" linkto="libz.so.1.2.5.1"/>
<QPG:Add file="../libz.so.1.2.5.1" install="/opt/lib/" component="slib"/>
</QPG:Files>
<QPG:PackageFilter>
@@ -63,7 +63,7 @@
</QPM:ProductDescription>
<QPM:ReleaseDescription>
<QPM:ReleaseVersion>1.2.4.2</QPM:ReleaseVersion>
<QPM:ReleaseVersion>1.2.5.1</QPM:ReleaseVersion>
<QPM:ReleaseUrgency>Medium</QPM:ReleaseUrgency>
<QPM:ReleaseStability>Stable</QPM:ReleaseStability>
<QPM:ReleaseNoteMinor></QPM:ReleaseNoteMinor>

View File

@@ -1,6 +1,6 @@
<?xml version="1.0" ?>
<package name="zlib" version="1.2.4.2">
<library name="zlib" dlversion="1.2.4.2" dlname="z">
<package name="zlib" version="1.2.5.1">
<library name="zlib" dlversion="1.2.5.1" dlname="z">
<property name="description"> zip compression library </property>
<property name="include-target-dir" value="$(@PACKAGE/install-includedir)" />

17
trees.c
View File

@@ -1,5 +1,5 @@
/* trees.c -- output deflated data using Huffman coding
* Copyright (C) 1995-2009 Jean-loup Gailly
* Copyright (C) 1995-2010 Jean-loup Gailly
* detect_data_type() function provided freely by Cosmin Truta, 2006
* For conditions of distribution and use, see copyright notice in zlib.h
*/
@@ -351,13 +351,14 @@ void gen_trees_header()
static_dtree[i].Len, SEPARATOR(i, D_CODES-1, 5));
}
fprintf(header, "const uch _dist_code[DIST_CODE_LEN] = {\n");
fprintf(header, "const uch ZLIB_INTERNAL _dist_code[DIST_CODE_LEN] = {\n");
for (i = 0; i < DIST_CODE_LEN; i++) {
fprintf(header, "%2u%s", _dist_code[i],
SEPARATOR(i, DIST_CODE_LEN-1, 20));
}
fprintf(header, "const uch _length_code[MAX_MATCH-MIN_MATCH+1]= {\n");
fprintf(header,
"const uch ZLIB_INTERNAL _length_code[MAX_MATCH-MIN_MATCH+1]= {\n");
for (i = 0; i < MAX_MATCH-MIN_MATCH+1; i++) {
fprintf(header, "%2u%s", _length_code[i],
SEPARATOR(i, MAX_MATCH-MIN_MATCH, 20));
@@ -382,7 +383,7 @@ void gen_trees_header()
/* ===========================================================================
* Initialize the tree data structures for a new zlib stream.
*/
void _tr_init(s)
void ZLIB_INTERNAL _tr_init(s)
deflate_state *s;
{
tr_static_init();
@@ -867,7 +868,7 @@ local void send_all_trees(s, lcodes, dcodes, blcodes)
/* ===========================================================================
* Send a stored block
*/
void _tr_stored_block(s, buf, stored_len, last)
void ZLIB_INTERNAL _tr_stored_block(s, buf, stored_len, last)
deflate_state *s;
charf *buf; /* input block */
ulg stored_len; /* length of input block */
@@ -892,7 +893,7 @@ void _tr_stored_block(s, buf, stored_len, last)
* To simplify the code, we assume the worst case of last real code encoded
* on one bit only.
*/
void _tr_align(s)
void ZLIB_INTERNAL _tr_align(s)
deflate_state *s;
{
send_bits(s, STATIC_TREES<<1, 3);
@@ -921,7 +922,7 @@ void _tr_align(s)
* Determine the best encoding for the current block: dynamic trees, static
* trees or store, and output the encoded block to the zip file.
*/
void _tr_flush_block(s, buf, stored_len, last)
void ZLIB_INTERNAL _tr_flush_block(s, buf, stored_len, last)
deflate_state *s;
charf *buf; /* input block, or NULL if too old */
ulg stored_len; /* length of input block */
@@ -1022,7 +1023,7 @@ void _tr_flush_block(s, buf, stored_len, last)
* Save the match info and tally the frequency counts. Return true if
* the current block must be flushed.
*/
int _tr_tally (s, dist, lc)
int ZLIB_INTERNAL _tr_tally (s, dist, lc)
deflate_state *s;
unsigned dist; /* distance of matched string */
unsigned lc; /* match length-MIN_MATCH or unmatched char (if dist==0) */

View File

@@ -70,7 +70,7 @@ local const ct_data static_dtree[D_CODES] = {
{{19},{ 5}}, {{11},{ 5}}, {{27},{ 5}}, {{ 7},{ 5}}, {{23},{ 5}}
};
const uch _dist_code[DIST_CODE_LEN] = {
const uch ZLIB_INTERNAL _dist_code[DIST_CODE_LEN] = {
0, 1, 2, 3, 4, 4, 5, 5, 6, 6, 6, 6, 7, 7, 7, 7, 8, 8, 8, 8,
8, 8, 8, 8, 9, 9, 9, 9, 9, 9, 9, 9, 10, 10, 10, 10, 10, 10, 10, 10,
10, 10, 10, 10, 10, 10, 10, 10, 11, 11, 11, 11, 11, 11, 11, 11, 11, 11, 11, 11,
@@ -99,7 +99,7 @@ const uch _dist_code[DIST_CODE_LEN] = {
29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29
};
const uch _length_code[MAX_MATCH-MIN_MATCH+1]= {
const uch ZLIB_INTERNAL _length_code[MAX_MATCH-MIN_MATCH+1]= {
0, 1, 2, 3, 4, 5, 6, 7, 8, 8, 9, 9, 10, 10, 11, 11, 12, 12, 12, 12,
13, 13, 13, 13, 14, 14, 14, 14, 15, 15, 15, 15, 16, 16, 16, 16, 16, 16, 16, 16,
17, 17, 17, 17, 17, 17, 17, 17, 18, 18, 18, 18, 18, 18, 18, 18, 19, 19, 19, 19,

View File

@@ -25,7 +25,12 @@
STATICLIB = libz.a
SHAREDLIB = zlib1.dll
IMPLIB = libzdll.a
IMPLIB = libz.dll.a
#
# Set to 1 if shared object needs to be installed
#
SHARED_MODE=0
#LOC = -DASMV
#LOC = -DDEBUG -g
@@ -33,12 +38,13 @@ IMPLIB = libzdll.a
PREFIX =
CC = $(PREFIX)gcc
CFLAGS = $(LOC) -O3 -Wall
EXTRA_CFLAGS = -DNO_VIZ
AS = $(CC)
ASFLAGS = $(LOC) -Wall
LD = $(CC)
LDFLAGS = $(LOC) -s
LDFLAGS = $(LOC)
AR = $(PREFIX)ar
ARFLAGS = rcs
@@ -53,7 +59,7 @@ CP = cp -fp
INSTALL = $(CP)
RM = rm -f
prefix = /usr/local
prefix ?= /usr/local
exec_prefix = $(prefix)
OBJS = adler32.o compress.o crc32.o deflate.o gzclose.o gzlib.o gzread.o \
@@ -71,7 +77,7 @@ testdll: example_d.exe minigzip_d.exe
echo hello world | ./minigzip_d | ./minigzip_d -d
.c.o:
$(CC) $(CFLAGS) -c -o $@ $<
$(CC) $(CFLAGS) $(EXTRA_CFLAGS) -c -o $@ $<
.S.o:
$(AS) $(ASFLAGS) -c -o $@ $<
@@ -82,43 +88,62 @@ $(STATICLIB): $(OBJS) $(OBJA)
$(IMPLIB): $(SHAREDLIB)
$(SHAREDLIB): win32/zlib.def $(OBJS) $(OBJA) zlibrc.o
$(CC) -shared -Wl,--out-implib,$(IMPLIB) \
$(CC) -shared -Wl,--out-implib,$(IMPLIB) $(LDFLAGS) \
-o $@ win32/zlib.def $(OBJS) $(OBJA) zlibrc.o
$(STRIP) $@
example.exe: example.o $(STATICLIB)
$(LD) $(LDFLAGS) -o $@ example.o $(STATICLIB)
$(STRIP) $@
minigzip.exe: minigzip.o $(STATICLIB)
$(LD) $(LDFLAGS) -o $@ minigzip.o $(STATICLIB)
$(STRIP) $@
example_d.exe: example.o $(IMPLIB)
$(LD) $(LDFLAGS) -o $@ example.o $(IMPLIB)
$(STRIP) $@
minigzip_d.exe: minigzip.o $(IMPLIB)
$(LD) $(LDFLAGS) -o $@ minigzip.o $(IMPLIB)
$(STRIP) $@
zlibrc.o: win32/zlib1.rc
$(RC) $(RCFLAGS) -o $@ win32/zlib1.rc
# INCLUDE_PATH and LIBRARY_PATH must be set.
# BINARY_PATH, INCLUDE_PATH and LIBRARY_PATH must be set.
.PHONY: install uninstall clean
install: zlib.h zconf.h $(LIB)
install: zlib.h zconf.h $(STATICLIB) $(IMPLIB)
-@mkdir -p $(INCLUDE_PATH)
-@mkdir -p $(LIBRARY_PATH)
-@mkdir -p $(LIBRARY_PATH) $(LIBRARY_PATH)/pkgconfig
-if [ "$(SHARED_MODE)" = "1" ]; then \
mkdir -p $(BINARY_PATH); \
$(INSTALL) $(SHAREDLIB) $(BINARY_PATH); \
$(INSTALL) $(IMPLIB) $(LIBRARY_PATH); \
fi
-$(INSTALL) zlib.h $(INCLUDE_PATH)
-$(INSTALL) zconf.h $(INCLUDE_PATH)
-$(INSTALL) $(STATICLIB) $(LIBRARY_PATH)
-$(INSTALL) $(IMPLIB) $(LIBRARY_PATH)
sed \
-e 's|@prefix@|${prefix}|g' \
-e 's|@exec_prefix@|${exec_prefix}|g' \
-e 's|@libdir@|$(LIBRARY_PATH)|g' \
-e 's|@sharedlibdir@|$(LIBRARY_PATH)|g' \
-e 's|@includedir@|$(INCLUDE_PATH)|g' \
-e 's|@VERSION@|'`sed -n -e '/VERSION "/s/.*"\(.*\)".*/\1/p' zlib.h`'|g' \
zlib.pc.in > $(LIBRARY_PATH)/pkgconfig/zlib.pc
uninstall:
-if [ "$(SHARED_MODE)" = "1" ]; then \
$(RM) $(BINARY_PATH)/$(SHAREDLIB); \
$(RM) $(LIBRARY_PATH)/$(IMPLIB); \
fi
-$(RM) $(INCLUDE_PATH)/zlib.h
-$(RM) $(INCLUDE_PATH)/zconf.h
-$(RM) $(LIBRARY_PATH)/$(STATICLIB)
-$(RM) $(LIBRARY_PATH)/$(IMPLIB)
clean:
-$(RM) $(STATICLIB)

View File

@@ -30,7 +30,7 @@ ARFLAGS = -nologo
RCFLAGS = /dWIN32 /r
OBJS = adler32.obj compress.obj crc32.obj deflate.obj gzclose.obj gzlib.obj gzread.obj \
gzwrite.obj infback.obj inflate.obj inftrees.obj trees.obj uncompr.obj zutil.obj
gzwrite.obj infback.obj inflate.obj inftrees.obj inffast.obj trees.obj uncompr.obj zutil.obj
OBJA =

View File

@@ -15,6 +15,7 @@ EXPORTS
deflateParams
deflateTune
deflateBound
deflatePending
deflatePrime
deflateSetHeader
inflateSetDictionary

42
zconf.h
View File

@@ -1,5 +1,5 @@
/* zconf.h -- configuration of the zlib compression library
* Copyright (C) 1995-2010 Jean-loup Gailly.
* Copyright (C) 1995-2011 Jean-loup Gailly.
* For conditions of distribution and use, see copyright notice in zlib.h
*/
@@ -15,6 +15,7 @@
* this permanently in zconf.h using "./configure --zprefix".
*/
#ifdef Z_PREFIX /* may be set to #if 1 by ./configure */
# define Z_PREFIX_SET
/* all linked symbols */
# define _dist_code z__dist_code
@@ -40,6 +41,7 @@
# define deflateInit2_ z_deflateInit2_
# define deflateInit_ z_deflateInit_
# define deflateParams z_deflateParams
# define deflatePending z_deflatePending
# define deflatePrime z_deflatePrime
# define deflateReset z_deflateReset
# define deflateSetDictionary z_deflateSetDictionary
@@ -243,6 +245,14 @@
# endif
#endif
#ifndef ON /* function prototypes for stdarg */
# if defined(STDC) || defined(Z_HAVE_STDARG_H)
# define ON(args) args
# else
# define ON(args) ()
# endif
#endif
/* The following definitions for FAR are needed only for MSDOS mixed
* model programming (small or medium model with some far allocations).
* This was tested only with MSC; for other MSDOS compilers you may have
@@ -315,10 +325,6 @@
# endif
#endif
#ifdef HAVE_VISIBILITY_PRAGMA
# define ZEXTERN __attribute__((visibility ("default"))) extern
#endif
#ifndef ZEXTERN
# define ZEXTERN extern
#endif
@@ -364,11 +370,29 @@ typedef uLong FAR uLongf;
# define Z_HAVE_UNISTD_H
#endif
#ifdef HAVE_STDARG_H /* may be set to #if 1 by ./configure */
# define Z_HAVE_STDARG_H
#endif
#ifdef STDC
# include <sys/types.h> /* for off_t */
#endif
#if defined(Z_HAVE_UNISTD_H) || _LARGEFILE64_SOURCE
/* a little trick to accommodate both "#define _LARGEFILE64_SOURCE" and
* "#define _LARGEFILE64_SOURCE 1" as requesting 64-bit operations, (even
* though the former does not conform to the LFS document), but considering
* both "#undef _LARGEFILE64_SOURCE" and "#define _LARGEFILE64_SOURCE 0" as
* equivalently requesting no 64-bit operations
*/
#if -_LARGEFILE64_SOURCE - -1 == 1
# undef _LARGEFILE64_SOURCE
#endif
#if defined(_LARGEFILE64_SOURCE) && _LFS64_LARGEFILE-0
# define Z_LARGE
#endif
#if defined(Z_HAVE_UNISTD_H) || defined(Z_LARGE)
# include <unistd.h> /* for SEEK_* and off_t */
# ifdef VMS
# include <unixio.h> /* for off_t */
@@ -388,6 +412,12 @@ typedef uLong FAR uLongf;
# define z_off_t long
#endif
#if defined(_LARGEFILE64_SOURCE) && _LFS64_LARGEFILE-0
# define z_off64_t off64_t
#else
# define z_off64_t z_off_t
#endif
#if defined(__OS400__)
# define NO_vsnprintf
#endif

View File

@@ -1,5 +1,5 @@
/* zconf.h -- configuration of the zlib compression library
* Copyright (C) 1995-2010 Jean-loup Gailly.
* Copyright (C) 1995-2011 Jean-loup Gailly.
* For conditions of distribution and use, see copyright notice in zlib.h
*/
@@ -17,6 +17,7 @@
* this permanently in zconf.h using "./configure --zprefix".
*/
#ifdef Z_PREFIX /* may be set to #if 1 by ./configure */
# define Z_PREFIX_SET
/* all linked symbols */
# define _dist_code z__dist_code
@@ -42,6 +43,7 @@
# define deflateInit2_ z_deflateInit2_
# define deflateInit_ z_deflateInit_
# define deflateParams z_deflateParams
# define deflatePending z_deflatePending
# define deflatePrime z_deflatePrime
# define deflateReset z_deflateReset
# define deflateSetDictionary z_deflateSetDictionary
@@ -245,6 +247,14 @@
# endif
#endif
#ifndef ON /* function prototypes for stdarg */
# if defined(STDC) || defined(Z_HAVE_STDARG_H)
# define ON(args) args
# else
# define ON(args) ()
# endif
#endif
/* The following definitions for FAR are needed only for MSDOS mixed
* model programming (small or medium model with some far allocations).
* This was tested only with MSC; for other MSDOS compilers you may have
@@ -317,10 +327,6 @@
# endif
#endif
#ifdef HAVE_VISIBILITY_PRAGMA
# define ZEXTERN __attribute__((visibility ("default"))) extern
#endif
#ifndef ZEXTERN
# define ZEXTERN extern
#endif
@@ -366,11 +372,29 @@ typedef uLong FAR uLongf;
# define Z_HAVE_UNISTD_H
#endif
#ifdef HAVE_STDARG_H /* may be set to #if 1 by ./configure */
# define Z_HAVE_STDARG_H
#endif
#ifdef STDC
# include <sys/types.h> /* for off_t */
#endif
#if defined(Z_HAVE_UNISTD_H) || _LARGEFILE64_SOURCE
/* a little trick to accommodate both "#define _LARGEFILE64_SOURCE" and
* "#define _LARGEFILE64_SOURCE 1" as requesting 64-bit operations, (even
* though the former does not conform to the LFS document), but considering
* both "#undef _LARGEFILE64_SOURCE" and "#define _LARGEFILE64_SOURCE 0" as
* equivalently requesting no 64-bit operations
*/
#if -_LARGEFILE64_SOURCE - -1 == 1
# undef _LARGEFILE64_SOURCE
#endif
#if defined(_LARGEFILE64_SOURCE) && _LFS64_LARGEFILE-0
# define Z_LARGE
#endif
#if defined(Z_HAVE_UNISTD_H) || defined(Z_LARGE)
# include <unistd.h> /* for SEEK_* and off_t */
# ifdef VMS
# include <unixio.h> /* for off_t */
@@ -390,6 +414,12 @@ typedef uLong FAR uLongf;
# define z_off_t long
#endif
#if defined(_LARGEFILE64_SOURCE) && _LFS64_LARGEFILE-0
# define z_off64_t off64_t
#else
# define z_off64_t z_off_t
#endif
#if defined(__OS400__)
# define NO_vsnprintf
#endif

View File

@@ -1,5 +1,5 @@
/* zconf.h -- configuration of the zlib compression library
* Copyright (C) 1995-2010 Jean-loup Gailly.
* Copyright (C) 1995-2011 Jean-loup Gailly.
* For conditions of distribution and use, see copyright notice in zlib.h
*/
@@ -15,6 +15,7 @@
* this permanently in zconf.h using "./configure --zprefix".
*/
#ifdef Z_PREFIX /* may be set to #if 1 by ./configure */
# define Z_PREFIX_SET
/* all linked symbols */
# define _dist_code z__dist_code
@@ -40,6 +41,7 @@
# define deflateInit2_ z_deflateInit2_
# define deflateInit_ z_deflateInit_
# define deflateParams z_deflateParams
# define deflatePending z_deflatePending
# define deflatePrime z_deflatePrime
# define deflateReset z_deflateReset
# define deflateSetDictionary z_deflateSetDictionary
@@ -243,6 +245,14 @@
# endif
#endif
#ifndef ON /* function prototypes for stdarg */
# if defined(STDC) || defined(Z_HAVE_STDARG_H)
# define ON(args) args
# else
# define ON(args) ()
# endif
#endif
/* The following definitions for FAR are needed only for MSDOS mixed
* model programming (small or medium model with some far allocations).
* This was tested only with MSC; for other MSDOS compilers you may have
@@ -315,10 +325,6 @@
# endif
#endif
#ifdef HAVE_VISIBILITY_PRAGMA
# define ZEXTERN __attribute__((visibility ("default"))) extern
#endif
#ifndef ZEXTERN
# define ZEXTERN extern
#endif
@@ -364,11 +370,29 @@ typedef uLong FAR uLongf;
# define Z_HAVE_UNISTD_H
#endif
#ifdef HAVE_STDARG_H /* may be set to #if 1 by ./configure */
# define Z_HAVE_STDARG_H
#endif
#ifdef STDC
# include <sys/types.h> /* for off_t */
#endif
#if defined(Z_HAVE_UNISTD_H) || _LARGEFILE64_SOURCE
/* a little trick to accommodate both "#define _LARGEFILE64_SOURCE" and
* "#define _LARGEFILE64_SOURCE 1" as requesting 64-bit operations, (even
* though the former does not conform to the LFS document), but considering
* both "#undef _LARGEFILE64_SOURCE" and "#define _LARGEFILE64_SOURCE 0" as
* equivalently requesting no 64-bit operations
*/
#if -_LARGEFILE64_SOURCE - -1 == 1
# undef _LARGEFILE64_SOURCE
#endif
#if defined(_LARGEFILE64_SOURCE) && _LFS64_LARGEFILE-0
# define Z_LARGE
#endif
#if defined(Z_HAVE_UNISTD_H) || defined(Z_LARGE)
# include <unistd.h> /* for SEEK_* and off_t */
# ifdef VMS
# include <unixio.h> /* for off_t */
@@ -388,6 +412,12 @@ typedef uLong FAR uLongf;
# define z_off_t long
#endif
#if defined(_LARGEFILE64_SOURCE) && _LFS64_LARGEFILE-0
# define z_off64_t off64_t
#else
# define z_off64_t z_off_t
#endif
#if defined(__OS400__)
# define NO_vsnprintf
#endif

12
zlib.3
View File

@@ -1,4 +1,4 @@
.TH ZLIB 3 "9 Apr 2010"
.TH ZLIB 3 "10 Sep 2011"
.SH NAME
zlib \- compression/decompression library
.SH SYNOPSIS
@@ -95,11 +95,11 @@ http://zlib.net/
The data format used by the zlib library is described by RFC
(Request for Comments) 1950 to 1952 in the files:
.IP
http://www.ietf.org/rfc/rfc1950.txt (for the zlib header and trailer format)
http://tools.ietf.org/html/rfc1950 (for the zlib header and trailer format)
.br
http://www.ietf.org/rfc/rfc1951.txt (for the deflate compressed data format)
http://tools.ietf.org/html/rfc1951 (for the deflate compressed data format)
.br
http://www.ietf.org/rfc/rfc1952.txt (for the gzip header and trailer format)
http://tools.ietf.org/html/rfc1952 (for the gzip header and trailer format)
.LP
Mark Nelson wrote an article about
.I zlib
@@ -125,8 +125,8 @@ before asking for help.
Send questions and/or comments to zlib@gzip.org,
or (for the Windows DLL version) to Gilles Vollant (info@winimage.com).
.SH AUTHORS
Version 1.2.4.2
Copyright (C) 1995-2010 Jean-loup Gailly (jloup@gzip.org)
Version 1.2.5.1
Copyright (C) 1995-2011 Jean-loup Gailly (jloup@gzip.org)
and Mark Adler (madler@alumni.caltech.edu).
.LP
This software is provided "as-is,"

Binary file not shown.

144
zlib.h
View File

@@ -1,7 +1,7 @@
/* zlib.h -- interface of the 'zlib' general purpose compression library
version 1.2.4.2, April 9th, 2010
version 1.2.5.1, September 10th, 2011
Copyright (C) 1995-2010 Jean-loup Gailly and Mark Adler
Copyright (C) 1995-2011 Jean-loup Gailly and Mark Adler
This software is provided 'as-is', without any express or implied
warranty. In no event will the authors be held liable for any damages
@@ -24,8 +24,8 @@
The data format used by the zlib library is described by RFCs (Request for
Comments) 1950 to 1952 in the files http://www.ietf.org/rfc/rfc1950.txt
(zlib format), rfc1951.txt (deflate format) and rfc1952.txt (gzip format).
Comments) 1950 to 1952 in the files http://tools.ietf.org/html/rfc1950
(zlib format), rfc1951 (deflate format) and rfc1952 (gzip format).
*/
#ifndef ZLIB_H
@@ -37,12 +37,12 @@
extern "C" {
#endif
#define ZLIB_VERSION "1.2.4.2"
#define ZLIB_VERNUM 0x1241
#define ZLIB_VERSION "1.2.5.1"
#define ZLIB_VERNUM 0x1251
#define ZLIB_VER_MAJOR 1
#define ZLIB_VER_MINOR 2
#define ZLIB_VER_REVISION 4
#define ZLIB_VER_SUBREVISION 2
#define ZLIB_VER_REVISION 5
#define ZLIB_VER_SUBREVISION 1
/*
The 'zlib' compression library provides in-memory compression and
@@ -85,11 +85,11 @@ struct internal_state;
typedef struct z_stream_s {
Bytef *next_in; /* next input byte */
uInt avail_in; /* number of bytes available at next_in */
uLong total_in; /* total nb of input bytes read so far */
uLong total_in; /* total number of input bytes read so far */
Bytef *next_out; /* next output byte should be put there */
uInt avail_out; /* remaining free space at next_out */
uLong total_out; /* total nb of bytes output so far */
uLong total_out; /* total number of bytes output so far */
char *msg; /* last error message, NULL if no error */
struct internal_state FAR *state; /* not visible by applications */
@@ -327,8 +327,9 @@ ZEXTERN int ZEXPORT deflate OF((z_streamp strm, int flush));
Z_FINISH can be used immediately after deflateInit if all the compression
is to be done in a single step. In this case, avail_out must be at least the
value returned by deflateBound (see below). If deflate does not return
Z_STREAM_END, then it must be called again as described above.
value returned by deflateBound (see below). Then deflate is guaranteed to
return Z_STREAM_END. If not enough output space is provided, deflate will
not return Z_STREAM_END, and it must be called again as described above.
deflate() sets strm->adler to the adler32 checksum of all input read
so far (that is, total_in bytes).
@@ -688,8 +689,27 @@ ZEXTERN uLong ZEXPORT deflateBound OF((z_streamp strm,
deflation of sourceLen bytes. It must be called after deflateInit() or
deflateInit2(), and after deflateSetHeader(), if used. This would be used
to allocate an output buffer for deflation in a single pass, and so would be
called before deflate().
called before deflate(). If that first deflate() call is provided the
sourceLen input bytes, an output buffer allocated to the size returned by
deflateBound(), and the flush value Z_FINISH, then deflate() is guaranteed
to return Z_STREAM_END. Note that it is possible for the compressed size to
be larger than the value returned by deflateBound() if flush options other
than Z_FINISH or Z_NO_FLUSH are used.
*/
ZEXTERN int ZEXPORT deflatePending OF((z_streamp strm,
unsigned *pending,
int *bits));
/*
deflatePending() returns the number of bytes and bits of output that have
been generated, but not yet provided in the available output. The bytes not
provided would be due to the available output space having being consumed.
The number of bits of output not provided are between 0 and 7, where they
await more bits to join them in order to fill out a full byte.
deflatePending returns Z_OK if success, or Z_STREAM_ERROR if the source
stream state was inconsistent.
*/
ZEXTERN int ZEXPORT deflatePrime OF((z_streamp strm,
int bits,
@@ -805,17 +825,21 @@ ZEXTERN int ZEXPORT inflateSetDictionary OF((z_streamp strm,
ZEXTERN int ZEXPORT inflateSync OF((z_streamp strm));
/*
Skips invalid compressed data until a full flush point (see above the
description of deflate with Z_FULL_FLUSH) can be found, or until all
Skips invalid compressed data until a possible full flush point (see above
for the description of deflate with Z_FULL_FLUSH) can be found, or until all
available input is skipped. No output is provided.
inflateSync returns Z_OK if a full flush point has been found, Z_BUF_ERROR
if no more input was provided, Z_DATA_ERROR if no flush point has been
found, or Z_STREAM_ERROR if the stream structure was inconsistent. In the
success case, the application may save the current current value of total_in
which indicates where valid compressed data was found. In the error case,
the application may repeatedly call inflateSync, providing more input each
time, until success or end of the input data.
inflateSync searches for a 00 00 FF FF pattern in the compressed data.
All full flush points have this pattern, but not all occurences of this
pattern are full flush points.
inflateSync returns Z_OK if a possible full flush point has been found,
Z_BUF_ERROR if no more input was provided, Z_DATA_ERROR if no flush point
has been found, or Z_STREAM_ERROR if the stream structure was inconsistent.
In the success case, the application may save the current current value of
total_in which indicates where valid compressed data was found. In the
error case, the application may repeatedly call inflateSync, providing more
input each time, until success or end of the input data.
*/
ZEXTERN int ZEXPORT inflateCopy OF((z_streamp dest,
@@ -962,7 +986,7 @@ ZEXTERN int ZEXPORT inflateBackInit OF((z_streamp strm, int windowBits,
See inflateBack() for the usage of these routines.
inflateBackInit will return Z_OK on success, Z_STREAM_ERROR if any of
the paramaters are invalid, Z_MEM_ERROR if the internal state could not be
the parameters are invalid, Z_MEM_ERROR if the internal state could not be
allocated, or Z_VERSION_ERROR if the version of the library does not match
the version of the header file.
*/
@@ -1256,7 +1280,7 @@ ZEXTERN int ZEXPORT gzwrite OF((gzFile file,
error.
*/
ZEXTERN int ZEXPORTVA gzprintf OF((gzFile file, const char *format, ...));
ZEXTERN int ZEXPORTVA gzprintf ON((gzFile file, const char *format, ...));
/*
Converts, formats, and writes the arguments to the compressed file under
control of the format string, as in fprintf. gzprintf returns the number of
@@ -1492,7 +1516,9 @@ ZEXTERN uLong ZEXPORT adler32_combine OF((uLong adler1, uLong adler2,
Combine two Adler-32 checksums into one. For two sequences of bytes, seq1
and seq2 with lengths len1 and len2, Adler-32 checksums were calculated for
each, adler1 and adler2. adler32_combine() returns the Adler-32 checksum of
seq1 and seq2 concatenated, requiring only adler1, adler2, and len2.
seq1 and seq2 concatenated, requiring only adler1, adler2, and len2. Note
that the z_off_t type (like off_t) is a signed integer. If len2 is
negative, the result has no meaning or utility.
*/
ZEXTERN uLong ZEXPORT crc32 OF((uLong crc, const Bytef *buf, uInt len));
@@ -1544,41 +1570,57 @@ ZEXTERN int ZEXPORT inflateBackInit_ OF((z_streamp strm, int windowBits,
const char *version,
int stream_size));
#define deflateInit(strm, level) \
deflateInit_((strm), (level), ZLIB_VERSION, sizeof(z_stream))
deflateInit_((strm), (level), ZLIB_VERSION, (int)sizeof(z_stream))
#define inflateInit(strm) \
inflateInit_((strm), ZLIB_VERSION, sizeof(z_stream))
inflateInit_((strm), ZLIB_VERSION, (int)sizeof(z_stream))
#define deflateInit2(strm, level, method, windowBits, memLevel, strategy) \
deflateInit2_((strm),(level),(method),(windowBits),(memLevel),\
(strategy), ZLIB_VERSION, sizeof(z_stream))
(strategy), ZLIB_VERSION, (int)sizeof(z_stream))
#define inflateInit2(strm, windowBits) \
inflateInit2_((strm), (windowBits), ZLIB_VERSION, sizeof(z_stream))
inflateInit2_((strm), (windowBits), ZLIB_VERSION, \
(int)sizeof(z_stream))
#define inflateBackInit(strm, windowBits, window) \
inflateBackInit_((strm), (windowBits), (window), \
ZLIB_VERSION, sizeof(z_stream))
ZLIB_VERSION, (int)sizeof(z_stream))
#if _LARGEFILE64_SOURCE && _LFS64_LARGEFILE
/* provide 64-bit offset functions if _LARGEFILE64_SOURCE defined, and/or
* change the regular functions to 64 bits if _FILE_OFFSET_BITS is 64 (if
* both are true, the application gets the *64 functions, and the regular
* functions are changed to 64 bits) -- in case these are set on systems
* without large file support, _LFS64_LARGEFILE must also be true
*/
#if defined(_LARGEFILE64_SOURCE) && _LFS64_LARGEFILE-0
ZEXTERN gzFile ZEXPORT gzopen64 OF((const char *, const char *));
ZEXTERN off64_t ZEXPORT gzseek64 OF((gzFile, off64_t, int));
ZEXTERN off64_t ZEXPORT gztell64 OF((gzFile));
ZEXTERN off64_t ZEXPORT gzoffset64 OF((gzFile));
ZEXTERN uLong ZEXPORT adler32_combine64 OF((uLong, uLong, off64_t));
ZEXTERN uLong ZEXPORT crc32_combine64 OF((uLong, uLong, off64_t));
ZEXTERN z_off64_t ZEXPORT gzseek64 OF((gzFile, z_off64_t, int));
ZEXTERN z_off64_t ZEXPORT gztell64 OF((gzFile));
ZEXTERN z_off64_t ZEXPORT gzoffset64 OF((gzFile));
ZEXTERN uLong ZEXPORT adler32_combine64 OF((uLong, uLong, z_off64_t));
ZEXTERN uLong ZEXPORT crc32_combine64 OF((uLong, uLong, z_off64_t));
#endif
#if !defined(ZLIB_INTERNAL) && _FILE_OFFSET_BITS+0 == 64 && _LFS64_LARGEFILE
# define gzopen gzopen64
# define gzseek gzseek64
# define gztell gztell64
# define gzoffset gzoffset64
# define adler32_combine adler32_combine64
# define crc32_combine crc32_combine64
# if _LARGEFILE64_SOURCE
#if !defined(ZLIB_INTERNAL) && _FILE_OFFSET_BITS-0 == 64 && _LFS64_LARGEFILE-0
# ifdef Z_PREFIX_SET
# define z_gzopen z_gzopen64
# define z_gzseek z_gzseek64
# define z_gztell z_gztell64
# define z_gzoffset z_gzoffset64
# define z_adler32_combine z_adler32_combine64
# define z_crc32_combine z_crc32_combine64
# else
# define gzopen gzopen64
# define gzseek gzseek64
# define gztell gztell64
# define gzoffset gzoffset64
# define adler32_combine adler32_combine64
# define crc32_combine crc32_combine64
# endif
# ifndef _LARGEFILE64_SOURCE
ZEXTERN gzFile ZEXPORT gzopen64 OF((const char *, const char *));
ZEXTERN off_t ZEXPORT gzseek64 OF((gzFile, off_t, int));
ZEXTERN off_t ZEXPORT gztell64 OF((gzFile));
ZEXTERN off_t ZEXPORT gzoffset64 OF((gzFile));
ZEXTERN uLong ZEXPORT adler32_combine64 OF((uLong, uLong, off_t));
ZEXTERN uLong ZEXPORT crc32_combine64 OF((uLong, uLong, off_t));
ZEXTERN z_off_t ZEXPORT gzseek64 OF((gzFile, z_off_t, int));
ZEXTERN z_off_t ZEXPORT gztell64 OF((gzFile));
ZEXTERN z_off_t ZEXPORT gzoffset64 OF((gzFile));
ZEXTERN uLong ZEXPORT adler32_combine64 OF((uLong, uLong, z_off_t));
ZEXTERN uLong ZEXPORT crc32_combine64 OF((uLong, uLong, z_off_t));
# endif
#else
ZEXTERN gzFile ZEXPORT gzopen OF((const char *, const char *));
@@ -1589,10 +1631,12 @@ ZEXTERN int ZEXPORT inflateBackInit_ OF((z_streamp strm, int windowBits,
ZEXTERN uLong ZEXPORT crc32_combine OF((uLong, uLong, z_off_t));
#endif
/* hack for buggy compilers */
#if !defined(ZUTIL_H) && !defined(NO_DUMMY_DECL)
struct internal_state {int dummy;}; /* hack for buggy compilers */
struct internal_state {int dummy;};
#endif
/* undocumented functions */
ZEXTERN const char * ZEXPORT zError OF((int));
ZEXTERN int ZEXPORT inflateSyncPoint OF((z_streamp));
ZEXTERN const uLongf * ZEXPORT get_crc_table OF((void));

View File

@@ -66,3 +66,7 @@ ZLIB_1.2.3.5 {
gzclose_r;
gzclose_w;
} ZLIB_1.2.3.4;
ZLIB_1.2.5.1 {
deflatePending;
} ZLIB_1.2.5;

View File

@@ -1,6 +1,7 @@
prefix=@prefix@
exec_prefix=@exec_prefix@
libdir=@libdir@
sharedlibdir=@sharedlibdir@
includedir=@includedir@
Name: zlib
@@ -8,5 +9,5 @@ Description: zlib compression library
Version: @VERSION@
Requires:
Libs: -L${libdir} -lz
Libs: -L${libdir} -L${sharedlibdir} -lz
Cflags: -I${includedir}

26
zutil.c
View File

@@ -1,5 +1,5 @@
/* zutil.c -- target dependent utility functions for the compression library
* Copyright (C) 1995-2005 Jean-loup Gailly.
* Copyright (C) 1995-2005, 2010, 2011 Jean-loup Gailly.
* For conditions of distribution and use, see copyright notice in zlib.h
*/
@@ -85,7 +85,7 @@ uLong ZEXPORT zlibCompileFlags()
#ifdef FASTEST
flags += 1L << 21;
#endif
#ifdef STDC
#if defined(STDC) || defined(Z_HAVE_STDARG_H)
# ifdef NO_vsnprintf
flags += 1L << 25;
# ifdef HAS_vsprintf_void
@@ -117,9 +117,9 @@ uLong ZEXPORT zlibCompileFlags()
# ifndef verbose
# define verbose 0
# endif
int z_verbose = verbose;
int ZLIB_INTERNAL z_verbose = verbose;
void z_error (m)
void ZLIB_INTERNAL z_error (m)
char *m;
{
fprintf(stderr, "%s\n", m);
@@ -146,7 +146,7 @@ const char * ZEXPORT zError(err)
#ifndef HAVE_MEMCPY
void zmemcpy(dest, source, len)
void ZLIB_INTERNAL zmemcpy(dest, source, len)
Bytef* dest;
const Bytef* source;
uInt len;
@@ -157,7 +157,7 @@ void zmemcpy(dest, source, len)
} while (--len != 0);
}
int zmemcmp(s1, s2, len)
int ZLIB_INTERNAL zmemcmp(s1, s2, len)
const Bytef* s1;
const Bytef* s2;
uInt len;
@@ -170,7 +170,7 @@ int zmemcmp(s1, s2, len)
return 0;
}
void zmemzero(dest, len)
void ZLIB_INTERNAL zmemzero(dest, len)
Bytef* dest;
uInt len;
{
@@ -213,7 +213,7 @@ local ptr_table table[MAX_PTR];
* a protected system like OS/2. Use Microsoft C instead.
*/
voidpf zcalloc (voidpf opaque, unsigned items, unsigned size)
voidpf ZLIB_INTERNAL zcalloc (voidpf opaque, unsigned items, unsigned size)
{
voidpf buf = opaque; /* just to make some compilers happy */
ulg bsize = (ulg)items*size;
@@ -237,7 +237,7 @@ voidpf zcalloc (voidpf opaque, unsigned items, unsigned size)
return buf;
}
void zcfree (voidpf opaque, voidpf ptr)
void ZLIB_INTERNAL zcfree (voidpf opaque, voidpf ptr)
{
int n;
if (*(ush*)&ptr != 0) { /* object < 64K */
@@ -272,13 +272,13 @@ void zcfree (voidpf opaque, voidpf ptr)
# define _hfree hfree
#endif
voidpf zcalloc (voidpf opaque, uInt items, uInt size)
voidpf ZLIB_INTERNAL zcalloc (voidpf opaque, uInt items, uInt size)
{
if (opaque) opaque = 0; /* to make compiler happy */
return _halloc((long)items, size);
}
void zcfree (voidpf opaque, voidpf ptr)
void ZLIB_INTERNAL zcfree (voidpf opaque, voidpf ptr)
{
if (opaque) opaque = 0; /* to make compiler happy */
_hfree(ptr);
@@ -297,7 +297,7 @@ extern voidp calloc OF((uInt items, uInt size));
extern void free OF((voidpf ptr));
#endif
voidpf zcalloc (opaque, items, size)
voidpf ZLIB_INTERNAL zcalloc (opaque, items, size)
voidpf opaque;
unsigned items;
unsigned size;
@@ -307,7 +307,7 @@ voidpf zcalloc (opaque, items, size)
(voidpf)calloc(items, size);
}
void zcfree (opaque, ptr)
void ZLIB_INTERNAL zcfree (opaque, ptr)
voidpf opaque;
voidpf ptr;
{

30
zutil.h
View File

@@ -13,7 +13,12 @@
#ifndef ZUTIL_H
#define ZUTIL_H
#define ZLIB_INTERNAL
#if ((__GNUC__-0) * 10 + __GNUC_MINOR__-0 >= 33) && !defined(NO_VIZ)
# define ZLIB_INTERNAL __attribute__((visibility ("hidden")))
#else
# define ZLIB_INTERNAL
#endif
#include "zlib.h"
#ifdef STDC
@@ -154,14 +159,8 @@ extern const char * const z_errmsg[10]; /* indexed by 2-zlib_error */
#pragma warn -8066
#endif
#if _LARGEFILE64_SOURCE && _LFS64_LARGEFILE
# define z_off64_t off64_t
#else
# define z_off64_t z_off_t
#endif
/* provide prototypes for these when building zlib without LFS */
#if _LARGEFILE64_SOURCE+0 != 1 || _LFS64_LARGEFILE+0 != 1
#if !defined(_LARGEFILE64_SOURCE) || _LFS64_LARGEFILE-0 == 0
ZEXTERN uLong ZEXPORT adler32_combine64 OF((uLong, uLong, z_off_t));
ZEXTERN uLong ZEXPORT crc32_combine64 OF((uLong, uLong, z_off_t));
#endif
@@ -237,16 +236,16 @@ extern const char * const z_errmsg[10]; /* indexed by 2-zlib_error */
# define zmemzero(dest, len) memset(dest, 0, len)
# endif
#else
extern void zmemcpy OF((Bytef* dest, const Bytef* source, uInt len));
extern int zmemcmp OF((const Bytef* s1, const Bytef* s2, uInt len));
extern void zmemzero OF((Bytef* dest, uInt len));
void ZLIB_INTERNAL zmemcpy OF((Bytef* dest, const Bytef* source, uInt len));
int ZLIB_INTERNAL zmemcmp OF((const Bytef* s1, const Bytef* s2, uInt len));
void ZLIB_INTERNAL zmemzero OF((Bytef* dest, uInt len));
#endif
/* Diagnostic functions */
#ifdef DEBUG
# include <stdio.h>
extern int z_verbose;
extern void z_error OF((char *m));
extern int ZLIB_INTERNAL z_verbose;
extern void ZLIB_INTERNAL z_error OF((char *m));
# define Assert(cond,msg) {if(!(cond)) z_error(msg);}
# define Trace(x) {if (z_verbose>=0) fprintf x ;}
# define Tracev(x) {if (z_verbose>0) fprintf x ;}
@@ -263,8 +262,9 @@ extern const char * const z_errmsg[10]; /* indexed by 2-zlib_error */
#endif
voidpf zcalloc OF((voidpf opaque, unsigned items, unsigned size));
void zcfree OF((voidpf opaque, voidpf ptr));
voidpf ZLIB_INTERNAL zcalloc OF((voidpf opaque, unsigned items,
unsigned size));
void ZLIB_INTERNAL zcfree OF((voidpf opaque, voidpf ptr));
#define ZALLOC(strm, items, size) \
(*((strm)->zalloc))((strm)->opaque, (items), (size))