zlib 1.2.5.1

zlib 1.2.5
zlib 1.2.4.5
2011-09-11 11:04:49 -07:00 · 2011-09-09 23:35:10 -07:00 · 2011-09-09 23:34:55 -07:00 · 2011-09-09 23:34:45 -07:00 · 2011-09-09 23:34:38 -07:00 · 2011-09-09 23:34:30 -07:00
73 changed files with 1387 additions and 745 deletions
--- a/103
+++ b/103
@@ -1,6 +1,105 @@

                ChangeLog file for zlib

+Changes in 1.2.5.1 (10 Sep 2011)
+- Update FAQ entry on shared builds (#13)
+- Avoid symbolic argument to chmod in Makefile.in
+- Fix bug and add consts in contrib/puff [Oberhumer]
+- Update contrib/puff/zeros.raw test file to have all block types
+- Add full coverage test for puff in contrib/puff/Makefile
+- Fix static-only-build install in Makefile.in
+- Fix bug in unzGetCurrentFileInfo() in contrib/minizip [Kuno]
+- Add libz.a dependency to shared in Makefile.in for parallel builds
+- Spell out "number" (instead of "nb") in zlib.h for total_in, total_out
+- Replace $(...) with `...` in configure for non-bash sh [Bowler]
+- Add darwin* to Darwin* and solaris* to SunOS\ 5* in configure [Groffen]
+- Add solaris* to Linux* in configure to allow gcc use [Groffen]
+- Add *bsd* to Linux* case in configure [Bar-Lev]
+- Add inffast.obj to dependencies in win32/Makefile.msc
+- Correct spelling error in deflate.h [Kohler]
+- Change libzdll.a again to libz.dll.a (!) in win32/Makefile.gcc
+- Add test to configure for GNU C looking for gcc in output of $cc -v
+- Add zlib.pc generation to win32/Makefile.gcc [Weigelt]
+- Fix bug in zlib.h for _FILE_OFFSET_BITS set and _LARGEFILE64_SOURCE not
+- Add comment in zlib.h that adler32_combine with len2 < 0 makes no sense
+- Make NO_DIVIDE option in adler32.c much faster (thanks to John Reiser)
+- Make stronger test in zconf.h to include unistd.h for LFS
+- Apply Darwin patches for 64-bit file offsets to contrib/minizip [Slack]
+- Fix zlib.h LFS support when Z_PREFIX used
+- Add updated as400 support (removed from old) [Monnerat]
+- Avoid deflate sensitivity to volatile input data
+- Avoid division in adler32_combine for NO_DIVIDE
+- Clarify the use of Z_FINISH with deflateBound() amount of space
+- Set binary for output file in puff.c
+- Use u4 type for crc_table to avoid conversion warnings
+- Apply casts in zlib.h to avoid conversion warnings
+- Add OF to prototypes for adler32_combine_ and crc32_combine_ [Miller]
+- Improve inflateSync() documentation to note indeterminancy
+- Add deflatePending() function to return the amount of pending output
+- Correct the spelling of "specification" in FAQ [Randers-Pehrson]
+- Add a check in configure for stdarg.h, use for gzprintf()
+- Check that pointers fit in ints when gzprint() compiled old style
+- Add dummy name before $(SHAREDLIBV) in Makefile [Bar-Lev, Bowler]
+- Delete line in configure that adds -L. libz.a to LDFLAGS [Weigelt]
+- Add debug records in assmebler code [Londer]
+- Update RFC references to use http://tools.ietf.org/html/... [Li]
+- Add --archs option, use of libtool to configure for Mac OS X [Borstel]
+
+Changes in 1.2.5 (19 Apr 2010)
+- Disable visibility attribute in win32/Makefile.gcc [Bar-Lev]
+- Default to libdir as sharedlibdir in configure [Nieder]
+- Update copyright dates on modified source files
+- Update trees.c to be able to generate modified trees.h
+- Exit configure for MinGW, suggesting win32/Makefile.gcc
+- Check for NULL path in gz_open [Homurlu]
+
+Changes in 1.2.4.5 (18 Apr 2010)
+- Set sharedlibdir in configure [Torok]
+- Set LDFLAGS in Makefile.in [Bar-Lev]
+- Avoid mkdir objs race condition in Makefile.in [Bowler]
+- Add ZLIB_INTERNAL in front of internal inter-module functions and arrays
+- Define ZLIB_INTERNAL to hide internal functions and arrays for GNU C
+- Don't use hidden attribute when it is a warning generator (e.g. Solaris)
+
+Changes in 1.2.4.4 (18 Apr 2010)
+- Fix CROSS_PREFIX executable testing, CHOST extract, mingw* [Torok]
+- Undefine _LARGEFILE64_SOURCE in zconf.h if it is zero, but not if empty
+- Try to use bash or ksh regardless of functionality of /bin/sh
+- Fix configure incompatibility with NetBSD sh
+- Remove attempt to run under bash or ksh since have better NetBSD fix
+- Fix win32/Makefile.gcc for MinGW [Bar-Lev]
+- Add diagnostic messages when using CROSS_PREFIX in configure
+- Added --sharedlibdir option to configure [Weigelt]
+- Use hidden visibility attribute when available [Frysinger]
+
+Changes in 1.2.4.3 (10 Apr 2010)
+- Only use CROSS_PREFIX in configure for ar and ranlib if they exist
+- Use CROSS_PREFIX for nm [Bar-Lev]
+- Assume _LARGEFILE64_SOURCE defined is equivalent to true
+- Avoid use of undefined symbols in #if with && and ||
+- Make *64 prototypes in gzguts.h consistent with functions
+- Add -shared load option for MinGW in configure [Bowler]
+- Move z_off64_t to public interface, use instead of off64_t
+- Remove ! from shell test in configure (not portable to Solaris)
+- Change +0 macro tests to -0 for possibly increased portability
+
+Changes in 1.2.4.2 (9 Apr 2010)
+- Add consistent carriage returns to readme.txt's in masmx86 and masmx64
+- Really provide prototypes for *64 functions when building without LFS
+- Only define unlink() in minigzip.c if unistd.h not included
+- Update README to point to contrib/vstudio project files
+- Move projects/vc6 to old/ and remove projects/
+- Include stdlib.h in minigzip.c for setmode() definition under WinCE
+- Clean up assembler builds in win32/Makefile.msc [Rowe]
+- Include sys/types.h for Microsoft for off_t definition
+- Fix memory leak on error in gz_open()
+- Symbolize nm as $NM in configure [Weigelt]
+- Use TEST_LDSHARED instead of LDSHARED to link test programs [Weigelt]
+- Add +0 to _FILE_OFFSET_BITS and _LFS64_LARGEFILE in case not defined
+- Fix bug in gzeof() to take into account unused input data
+- Avoid initialization of structures with variables in puff.c
+- Updated win32/README-WIN32.txt [Rowe]
+
 Changes in 1.2.4.1 (28 Mar 2010)
 - Remove the use of [a-z] constructs for sed in configure [gentoo 310225]
 - Remove $(SHAREDLIB) from LIBS in Makefile.in [Creech]
@@ -123,7 +222,7 @@ Changes in 1.2.3.6 (17 Jan 2010)
 - Correct email address in configure for system options
 - Update make_vms.com and add make_vms.com to contrib/minizip [Zinser]
 - Update zlib.map [Brown]
- Fix Makefile.in for Solaris 10 make of example64 and minizip64 [T<EFBFBD>r<EFBFBD>k]
+- Fix Makefile.in for Solaris 10 make of example64 and minizip64 [Torok]
 - Apply various fixes to CMakeLists.txt [Lowman]
 - Add checks on len in gzread() and gzwrite()
 - Add error message for no more room for gzungetc()
@@ -207,7 +306,7 @@ Changes in 1.2.3.4 (21 Dec 2009)
 - Clear bytes after deflate lookahead to avoid use of uninitialized data
 - Change a limit in inftrees.c to be more transparent to Coverity Prevent
 - Update win32/zlib.def with exported symbols from zlib.h
- Correct spelling error in zlib.h [Willem]
+- Correct spelling errors in zlib.h [Willem, Sobrado]
 - Allow Z_BLOCK for deflate() to force a new block
 - Allow negative bits in inflatePrime() to delete existing bit buffer
 - Add Z_TREES flush option to inflate() to return at end of trees
--- a/8
+++ b/8
@@ -84,8 +84,10 @@ The lastest zlib FAQ is at http://zlib.net/zlib_faq.html

 13. How can I make a Unix shared library?

-    make clean
-    ./configure -s
+    By default a shared (and a static) library is built for Unix.  So:
+
+    make distclean
+    ./configure
    make

 14. How do I install a shared zlib library on Unix?
@@ -325,7 +327,7 @@ The lastest zlib FAQ is at http://zlib.net/zlib_faq.html
    correctly points to the zlib specification in RFC 1950 for the "deflate"
    transfer encoding, there have been reports of servers and browsers that
    incorrectly produce or expect raw deflate data per the deflate
-    specficiation in RFC 1951, most notably Microsoft.  So even though the
+    specification in RFC 1951, most notably Microsoft.  So even though the
    "deflate" transfer encoding using the zlib format would be the more
    efficient approach (and in fact exactly what the zlib format was designed
    for), using the "gzip" transfer encoding is probably more reliable due to
--- a/2
+++ b/2
@@ -17,12 +17,12 @@ zlib.pc.in      Template for pkg-config descriptor
 zlib2ansi       perl script to convert source files for C++ compilation

 amiga/          makefiles for Amiga SAS C
+as400/		makefiles for AS/400
 doc/            documentation for formats and algorithms
 msdos/          makefiles for MSDOS
 nintendods/     makefile for Nintendo DS
 old/            makefiles for various architectures and zlib documentation
                files that have not yet been updated for zlib 1.2.x
-projects/       projects for various Integrated Development Environments
 qnx/            makefiles for QNX
 watcom/         makefiles for OpenWatcom
 win32/          makefiles for Windows
--- a/Makefile.in
+++ b/Makefile.in
@@ -1,5 +1,5 @@
 # Makefile for zlib
-# Copyright (C) 1995-2010 Jean-loup Gailly.
+# Copyright (C) 1995-2011 Jean-loup Gailly.
 # For conditions of distribution and use, see copyright notice in zlib.h

 # To compile and test, type:
@@ -25,14 +25,14 @@ CFLAGS=-O
 #           -Wstrict-prototypes -Wmissing-prototypes

 SFLAGS=-O
-
-LDFLAGS=-L. libz.a
+LDFLAGS=
+TEST_LDFLAGS=-L. libz.a
 LDSHARED=$(CC)
 CPP=$(CC) -E

 STATICLIB=libz.a
 SHAREDLIB=libz.so
-SHAREDLIBV=libz.so.1.2.4.1
+SHAREDLIBV=libz.so.1.2.5.1
 SHAREDLIBM=libz.so.1
 LIBS=$(STATICLIB) $(SHAREDLIBV)

@@ -47,6 +47,7 @@ EXE=
 prefix = /usr/local
 exec_prefix = ${prefix}
 libdir = ${exec_prefix}/lib
+sharedlibdir = ${libdir}
 includedir = ${prefix}/include
 mandir = ${prefix}/share/man
 man3dir = ${mandir}/man3
@@ -131,22 +132,22 @@ minigzip64.o: minigzip.c zlib.h zconf.h
 .SUFFIXES: .lo

 .c.lo:
-	-@if [ ! -d objs ]; then mkdir objs; fi
+	-@mkdir objs 2>/dev/null || test -d objs
 	$(CC) $(SFLAGS) -DPIC -c -o objs/$*.o $<
 	-@mv objs/$*.o $@

-$(SHAREDLIBV): $(PIC_OBJS)
-	$(LDSHARED) $(SFLAGS) -o $@ $(PIC_OBJS) $(LDSHAREDLIBC)
+placebo $(SHAREDLIBV): $(PIC_OBJS) libz.a
+	$(LDSHARED) $(SFLAGS) -o $@ $(PIC_OBJS) $(LDSHAREDLIBC) $(LDFLAGS)
 	rm -f $(SHAREDLIB) $(SHAREDLIBM)
 	ln -s $@ $(SHAREDLIB)
 	ln -s $@ $(SHAREDLIBM)
 	-@rmdir objs

 example$(EXE): example.o $(STATICLIB)
-	$(CC) $(CFLAGS) -o $@ example.o $(LDFLAGS)
+	$(CC) $(CFLAGS) -o $@ example.o $(TEST_LDFLAGS)

 minigzip$(EXE): minigzip.o $(STATICLIB)
-	$(CC) $(CFLAGS) -o $@ minigzip.o $(LDFLAGS)
+	$(CC) $(CFLAGS) -o $@ minigzip.o $(TEST_LDFLAGS)

 examplesh$(EXE): example.o $(SHAREDLIBV)
 	$(CC) $(CFLAGS) -o $@ example.o -L. $(SHAREDLIBV)
@@ -155,24 +156,28 @@ minigzipsh$(EXE): minigzip.o $(SHAREDLIBV)
 	$(CC) $(CFLAGS) -o $@ minigzip.o -L. $(SHAREDLIBV)

 example64$(EXE): example64.o $(STATICLIB)
-	$(CC) $(CFLAGS) -o $@ example64.o $(LDFLAGS)
+	$(CC) $(CFLAGS) -o $@ example64.o $(TEST_LDFLAGS)

 minigzip64$(EXE): minigzip64.o $(STATICLIB)
-	$(CC) $(CFLAGS) -o $@ minigzip64.o $(LDFLAGS)
+	$(CC) $(CFLAGS) -o $@ minigzip64.o $(TEST_LDFLAGS)

 install-libs: $(LIBS)
 	-@if [ ! -d $(DESTDIR)$(exec_prefix)  ]; then mkdir -p $(DESTDIR)$(exec_prefix); fi
 	-@if [ ! -d $(DESTDIR)$(libdir)       ]; then mkdir -p $(DESTDIR)$(libdir); fi
+	-@if [ ! -d $(DESTDIR)$(sharedlibdir) ]; then mkdir -p $(DESTDIR)$(sharedlibdir); fi
 	-@if [ ! -d $(DESTDIR)$(man3dir)      ]; then mkdir -p $(DESTDIR)$(man3dir); fi
 	-@if [ ! -d $(DESTDIR)$(pkgconfigdir) ]; then mkdir -p $(DESTDIR)$(pkgconfigdir); fi
-	cp $(LIBS) $(DESTDIR)$(libdir)
-	cd $(DESTDIR)$(libdir); chmod u=rw,go=r $(STATICLIB)
-	-@(cd $(DESTDIR)$(libdir); $(RANLIB) libz.a || true) >/dev/null 2>&1
-	-@cd $(DESTDIR)$(libdir); if test "$(SHAREDLIBV)" -a -f $(SHAREDLIBV); then \
-	  chmod 755 $(SHAREDLIBV); \
-	  rm -f $(SHAREDLIB) $(SHAREDLIBM); \
-	  ln -s $(SHAREDLIBV) $(SHAREDLIB); \
-	  ln -s $(SHAREDLIBV) $(SHAREDLIBM); \
+	cp $(STATICLIB) $(DESTDIR)$(libdir)
+	chmod 644 $(DESTDIR)$(libdir)/$(STATICLIB)
+	-@($(RANLIB) $(DESTDIR)$(libdir)/libz.a || true) >/dev/null 2>&1
+	-@if test -n "$(SHAREDLIBV)"; then \
+	  cp $(SHAREDLIBV) $(DESTDIR)$(sharedlibdir); \
+	  echo "cp $(SHAREDLIBV) $(DESTDIR)$(sharedlibdir)"; \
+	  chmod 755 $(DESTDIR)$(sharedlibdir)/$(SHAREDLIBV); \
+	  echo "chmod 755 $(DESTDIR)$(sharedlibdir)/$(SHAREDLIBV)"; \
+	  rm -f $(DESTDIR)$(sharedlibdir)/$(SHAREDLIB) $(DESTDIR)$(sharedlibdir)/$(SHAREDLIBM); \
+	  ln -s $(DESTDIR)$(sharedlibdir)/$(SHAREDLIBV) $(DESTDIR)$(sharedlibdir)/$(SHAREDLIB); \
+	  ln -s $(DESTDIR)$(sharedlibdir)/$(SHAREDLIBV) $(DESTDIR)$(sharedlibdir)/$(SHAREDLIBM); \
 	  ($(LDCONFIG) || true)  >/dev/null 2>&1; \
 	fi
 	cp zlib.3 $(DESTDIR)$(man3dir)
@@ -190,7 +195,7 @@ install: install-libs
 uninstall:
 	cd $(DESTDIR)$(includedir); rm -f zlib.h zconf.h
 	cd $(DESTDIR)$(libdir); rm -f libz.a; \
-	if test "$(SHAREDLIBV)" -a -f $(SHAREDLIBV); then \
+	if test -n "$(SHAREDLIBV)" -a -f $(SHAREDLIBV); then \
 	  rm -f $(SHAREDLIBV) $(SHAREDLIB) $(SHAREDLIBM); \
 	fi
 	cd $(DESTDIR)$(man3dir); rm -f zlib.3
--- a/13
+++ b/13
@@ -1,10 +1,10 @@
 ZLIB DATA COMPRESSION LIBRARY

-zlib 1.2.4.1 is a general purpose data compression library.  All the code is
+zlib 1.2.5.1 is a general purpose data compression library.  All the code is
 thread safe.  The data format used by the zlib library is described by RFCs
 (Request for Comments) 1950 to 1952 in the files
-http://www.ietf.org/rfc/rfc1950.txt (zlib format), rfc1951.txt (deflate format)
-and rfc1952.txt (gzip format).
+http://tools.ietf.org/html/rfc1950 (zlib format), rfc1951 (deflate format) and
+rfc1952 (gzip format).

 All functions of the compression library are documented in the file zlib.h
 (volunteer to write man pages welcome, contact zlib@gzip.org).  A usage example
@@ -16,7 +16,8 @@ minigzip.c.
 To compile all files and run the test program, follow the instructions given at
 the top of Makefile.in.  In short "./configure; make test", and if that goes
 well, "make install" should work for most flavors of Unix.  For Windows, use one
-of the special makefiles in win32/ or projects/ .  For VMS, use make_vms.com.
+of the special makefiles in win32/ or contrib/vstudio/ .  For VMS, use
+make_vms.com.

 Questions about zlib should be sent to <zlib@gzip.org>, or to Gilles Vollant
 <info@winimage.com> for the Windows DLL version.  The zlib home page is
@@ -30,7 +31,7 @@ Mark Nelson <markn@ieee.org> wrote an article about zlib for the Jan.  1997
 issue of Dr.  Dobb's Journal; a copy of the article is available at
 http://marknelson.us/1997/01/01/zlib-engine/ .

-The changes made in version 1.2.4.1 are documented in the file ChangeLog.
+The changes made in version 1.2.5.1 are documented in the file ChangeLog.

 Unsupported third party contributions are provided in directory contrib/ .

@@ -83,7 +84,7 @@ Acknowledgments:

 Copyright notice:

- (C) 1995-2010 Jean-loup Gailly and Mark Adler
+ (C) 1995-2011 Jean-loup Gailly and Mark Adler

  This software is provided 'as-is', without any express or implied
  warranty.  In no event will the authors be held liable for any damages
--- a/adler32.c
+++ b/adler32.c
@@ -1,5 +1,5 @@
 /* adler32.c -- compute the Adler-32 checksum of a data stream
- * Copyright (C) 1995-2007 Mark Adler
+ * Copyright (C) 1995-2011 Mark Adler
 * For conditions of distribution and use, see copyright notice in zlib.h
 */

@@ -9,9 +9,9 @@

 #define local static

-local uLong adler32_combine_(uLong adler1, uLong adler2, z_off64_t len2);
+local uLong adler32_combine_ OF((uLong adler1, uLong adler2, z_off64_t len2));

-#define BASE 65521UL    /* largest prime smaller than 65536 */
+#define BASE 65521      /* largest prime smaller than 65536 */
 #define NMAX 5552
 /* NMAX is the largest n such that 255n(n+1)/2 + (n+1)(BASE-1) <= 2^32-1 */

@@ -21,39 +21,44 @@ local uLong adler32_combine_(uLong adler1, uLong adler2, z_off64_t len2);
 #define DO8(buf,i)  DO4(buf,i); DO4(buf,i+4);
 #define DO16(buf)   DO8(buf,0); DO8(buf,8);

-/* use NO_DIVIDE if your processor does not do division in hardware */
+/* use NO_DIVIDE if your processor does not do division in hardware --
+   try it both ways to see which is faster */
 #ifdef NO_DIVIDE
-#  define MOD(a) \
+/* note that this assumes BASE is 65521, where 65536 % 65521 == 15
+   (thank you to John Reiser for pointing this out) */
+#  define CHOP(a) \
    do { \
-        if (a >= (BASE << 16)) a -= (BASE << 16); \
-        if (a >= (BASE << 15)) a -= (BASE << 15); \
-        if (a >= (BASE << 14)) a -= (BASE << 14); \
-        if (a >= (BASE << 13)) a -= (BASE << 13); \
-        if (a >= (BASE << 12)) a -= (BASE << 12); \
-        if (a >= (BASE << 11)) a -= (BASE << 11); \
-        if (a >= (BASE << 10)) a -= (BASE << 10); \
-        if (a >= (BASE << 9)) a -= (BASE << 9); \
-        if (a >= (BASE << 8)) a -= (BASE << 8); \
-        if (a >= (BASE << 7)) a -= (BASE << 7); \
-        if (a >= (BASE << 6)) a -= (BASE << 6); \
-        if (a >= (BASE << 5)) a -= (BASE << 5); \
-        if (a >= (BASE << 4)) a -= (BASE << 4); \
-        if (a >= (BASE << 3)) a -= (BASE << 3); \
-        if (a >= (BASE << 2)) a -= (BASE << 2); \
-        if (a >= (BASE << 1)) a -= (BASE << 1); \
+        unsigned long tmp = a >> 16; \
+        a &= 0xffffUL; \
+        a += (tmp << 4) - tmp; \
+    } while (0)
+#  define MOD28(a) \
+    do { \
+        CHOP(a); \
        if (a >= BASE) a -= BASE; \
    } while (0)
-#  define MOD4(a) \
+#  define MOD(a) \
    do { \
-        if (a >= (BASE << 4)) a -= (BASE << 4); \
-        if (a >= (BASE << 3)) a -= (BASE << 3); \
-        if (a >= (BASE << 2)) a -= (BASE << 2); \
-        if (a >= (BASE << 1)) a -= (BASE << 1); \
+        CHOP(a); \
+        MOD28(a); \
+    } while (0)
+#  define MOD63(a) \
+    do { /* this assumes a is not negative */ \
+        z_off64_t tmp = a >> 32; \
+        a &= 0xffffffffL; \
+        a += (tmp << 8) - (tmp << 5) + tmp; \
+        tmp = a >> 16; \
+        a &= 0xffffL; \
+        a += (tmp << 4) - tmp; \
+        tmp = a >> 16; \
+        a &= 0xffffL; \
+        a += (tmp << 4) - tmp; \
        if (a >= BASE) a -= BASE; \
    } while (0)
 #else
 #  define MOD(a) a %= BASE
-#  define MOD4(a) a %= BASE
+#  define MOD28(a) a %= BASE
+#  define MOD63(a) a %= BASE
 #endif

 /* ========================================================================= */
@@ -92,7 +97,7 @@ uLong ZEXPORT adler32(adler, buf, len)
        }
        if (adler >= BASE)
            adler -= BASE;
-        MOD4(sum2);             /* only added so many BASE's */
+        MOD28(sum2);            /* only added so many BASE's */
        return adler | (sum2 << 16);
    }

@@ -137,8 +142,13 @@ local uLong adler32_combine_(adler1, adler2, len2)
    unsigned long sum2;
    unsigned rem;

+    /* for negative len, return invalid adler32 as a clue for debugging */
+    if (len2 < 0)
+        return 0xffffffffUL;
+
    /* the derivation of this formula is left as an exercise for the reader */
-    rem = (unsigned)(len2 % BASE);
+    MOD63(len2);                /* assumes len2 >= 0 */
+    rem = (unsigned)len2;
    sum1 = adler1 & 0xffff;
    sum2 = rem * sum1;
    MOD(sum2);
--- a/old/as400/bndsrc
+++ b/old/as400/bndsrc
@@ -34,6 +34,7 @@ STRPGMEXP PGMLVL(*CURRENT) SIGNATURE('ZLIB')
  EXPORT SYMBOL("deflateCopy")
  EXPORT SYMBOL("deflateReset")
  EXPORT SYMBOL("deflateParams")
+  EXPORT SYMBOL("deflatePending")
  EXPORT SYMBOL("deflatePrime")
  EXPORT SYMBOL("deflateInit_")
  EXPORT SYMBOL("deflateInit2_")
@@ -129,4 +130,54 @@ STRPGMEXP PGMLVL(*CURRENT) SIGNATURE('ZLIB')

  EXPORT SYMBOL("zlibCompileFlags")

+/*@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@*/
+/*   Version 1.2.5 additional entry points.                         */
+/*@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@*/
+
+/********************************************************************/
+/*   *MODULE      ADLER32      ZLIB         01/02/01  00:15:09      */
+/********************************************************************/
+
+  EXPORT SYMBOL("adler32_combine")
+  EXPORT SYMBOL("adler32_combine64")
+
+/********************************************************************/
+/*   *MODULE      CRC32        ZLIB         01/02/01  00:15:09      */
+/********************************************************************/
+
+  EXPORT SYMBOL("crc32_combine")
+  EXPORT SYMBOL("crc32_combine64")
+
+/********************************************************************/
+/*   *MODULE      GZLIB        ZLIB         01/02/01  00:15:09      */
+/********************************************************************/
+
+  EXPORT SYMBOL("gzbuffer")
+  EXPORT SYMBOL("gzoffset")
+  EXPORT SYMBOL("gzoffset64")
+  EXPORT SYMBOL("gzopen64")
+  EXPORT SYMBOL("gzseek64")
+  EXPORT SYMBOL("gztell64")
+
+/********************************************************************/
+/*   *MODULE      GZREAD       ZLIB         01/02/01  00:15:09      */
+/********************************************************************/
+
+  EXPORT SYMBOL("gzclose_r")
+
+/********************************************************************/
+/*   *MODULE      GZWRITE      ZLIB         01/02/01  00:15:09      */
+/********************************************************************/
+
+  EXPORT SYMBOL("gzclose_w")
+
+/********************************************************************/
+/*   *MODULE      INFLATE      ZLIB         01/02/01  00:15:09      */
+/********************************************************************/
+
+  EXPORT SYMBOL("inflateMark")
+  EXPORT SYMBOL("inflatePrime")
+  EXPORT SYMBOL("inflateReset2")
+  EXPORT SYMBOL("inflateUndermine")
+
 ENDPGMEXP
--- a/as400/compile.clp
+++ b/as400/compile.clp
@@ -0,0 +1,110 @@
+/******************************************************************************/
+/*                                                                            */
+/*  ZLIB                                                                      */
+/*                                                                            */
+/*    Compile sources into modules and link them into a service program.      */
+/*                                                                            */
+/******************************************************************************/
+
+             PGM
+
+/*      Configuration adjustable parameters.                                  */
+
+             DCL        VAR(&SRCLIB) TYPE(*CHAR) LEN(10) +
+                          VALUE('ZLIB')                         /* Source library. */
+             DCL        VAR(&SRCFILE) TYPE(*CHAR) LEN(10) +
+                          VALUE('SOURCES')                      /* Source member file. */
+             DCL        VAR(&CTLFILE) TYPE(*CHAR) LEN(10) +
+                          VALUE('TOOLS')                        /* Control member file. */
+
+             DCL        VAR(&MODLIB) TYPE(*CHAR) LEN(10) +
+                          VALUE('ZLIB')                         /* Module library. */
+
+             DCL        VAR(&SRVLIB) TYPE(*CHAR) LEN(10) +
+                          VALUE('LGPL')                         /* Service program library. */
+
+             DCL        VAR(&CFLAGS) TYPE(*CHAR) +
+                          VALUE('OPTIMIZE(40)')                 /* Compile options. */
+
+             DCL        VAR(&TGTRLS) TYPE(*CHAR) +
+                          VALUE('V5R3M0')                       /* Target release. */
+
+
+/*      Working storage.                                                      */
+
+             DCL        VAR(&CMDLEN) TYPE(*DEC) LEN(15 5) VALUE(300)    /* Command length. */
+             DCL        VAR(&CMD) TYPE(*CHAR) LEN(512)
+             DCL        VAR(&FIXDCMD) TYPE(*CHAR) LEN(512)
+
+
+/*      Compile sources into modules.                                         */
+
+             CHGVAR     VAR(&FIXDCMD) VALUE('CRTCMOD' *BCAT &CFLAGS *BCAT      +
+                        'SYSIFCOPT(*IFS64IO)' *BCAT                            +
+                        'DEFINE(''_LARGEFILE64_SOURCE''' *BCAT                 +
+                        '''_LFS64_LARGEFILE=1'') TGTRLS(' *TCAT &TGTRLS *TCAT  +
+                        ') SRCFILE(' *TCAT &SRCLIB *TCAT '/' *TCAT             +
+                        &SRCFILE *TCAT ') MODULE(' *TCAT &MODLIB *TCAT '/')
+
+
+             CHGVAR     VAR(&CMD) VALUE(&FIXDCMD *TCAT 'ADLER32)')
+             CALL       PGM(QCMDEXC) PARM(&CMD &CMDLEN)
+
+             CHGVAR     VAR(&CMD) VALUE(&FIXDCMD *TCAT 'COMPRESS)')
+             CALL       PGM(QCMDEXC) PARM(&CMD &CMDLEN)
+
+             CHGVAR     VAR(&CMD) VALUE(&FIXDCMD *TCAT 'CRC32)')
+             CALL       PGM(QCMDEXC) PARM(&CMD &CMDLEN)
+
+             CHGVAR     VAR(&CMD) VALUE(&FIXDCMD *TCAT 'DEFLATE)')
+             CALL       PGM(QCMDEXC) PARM(&CMD &CMDLEN)
+
+             CHGVAR     VAR(&CMD) VALUE(&FIXDCMD *TCAT 'GZCLOSE)')
+             CALL       PGM(QCMDEXC) PARM(&CMD &CMDLEN)
+
+             CHGVAR     VAR(&CMD) VALUE(&FIXDCMD *TCAT 'GZLIB)')
+             CALL       PGM(QCMDEXC) PARM(&CMD &CMDLEN)
+
+             CHGVAR     VAR(&CMD) VALUE(&FIXDCMD *TCAT 'GZREAD)')
+             CALL       PGM(QCMDEXC) PARM(&CMD &CMDLEN)
+
+             CHGVAR     VAR(&CMD) VALUE(&FIXDCMD *TCAT 'GZWRITE)')
+             CALL       PGM(QCMDEXC) PARM(&CMD &CMDLEN)
+
+             CHGVAR     VAR(&CMD) VALUE(&FIXDCMD *TCAT 'INFBACK)')
+             CALL       PGM(QCMDEXC) PARM(&CMD &CMDLEN)
+
+             CHGVAR     VAR(&CMD) VALUE(&FIXDCMD *TCAT 'INFFAST)')
+             CALL       PGM(QCMDEXC) PARM(&CMD &CMDLEN)
+
+             CHGVAR     VAR(&CMD) VALUE(&FIXDCMD *TCAT 'INFLATE)')
+             CALL       PGM(QCMDEXC) PARM(&CMD &CMDLEN)
+
+             CHGVAR     VAR(&CMD) VALUE(&FIXDCMD *TCAT 'INFTREES)')
+             CALL       PGM(QCMDEXC) PARM(&CMD &CMDLEN)
+
+             CHGVAR     VAR(&CMD) VALUE(&FIXDCMD *TCAT 'TREES)')
+             CALL       PGM(QCMDEXC) PARM(&CMD &CMDLEN)
+
+             CHGVAR     VAR(&CMD) VALUE(&FIXDCMD *TCAT 'UNCOMPR)')
+             CALL       PGM(QCMDEXC) PARM(&CMD &CMDLEN)
+
+             CHGVAR     VAR(&CMD) VALUE(&FIXDCMD *TCAT 'ZUTIL)')
+             CALL       PGM(QCMDEXC) PARM(&CMD &CMDLEN)
+
+
+/*      Link modules into a service program.                                  */
+
+             CRTSRVPGM  SRVPGM(&SRVLIB/ZLIB) +
+                          MODULE(&MODLIB/ADLER32     &MODLIB/COMPRESS    +
+                                 &MODLIB/CRC32       &MODLIB/DEFLATE     +
+                                 &MODLIB/GZCLOSE     &MODLIB/GZLIB       +
+                                 &MODLIB/GZREAD      &MODLIB/GZWRITE     +
+                                 &MODLIB/INFBACK     &MODLIB/INFFAST     +
+                                 &MODLIB/INFLATE     &MODLIB/INFTREES    +
+                                 &MODLIB/TREES       &MODLIB/UNCOMPR     +
+                                 &MODLIB/ZUTIL)                          +
+                          SRCFILE(&SRCLIB/&CTLFILE) SRCMBR(BNDSRC)       +
+                          TEXT('ZLIB 1.2.5.1') TGTRLS(&TGTRLS)
+
+             ENDPGM
--- a/old/as400/readme.txt
+++ b/old/as400/readme.txt
@@ -1,4 +1,4 @@
-        ZLIB version 1.2.3 for AS400 installation instructions
+        ZLIB version 1.2.5.1 for AS400 installation instructions

 I) From an AS400 *SAVF file:

@@ -70,7 +70,10 @@ II) From the original source distribution:
    compress.c          COMPRESS C     ZLIB - Compress a memory buffer
    crc32.c             CRC32    C     ZLIB - Compute the CRC-32 of a data stream
    deflate.c           DEFLATE  C     ZLIB - Compress data using the deflation algorithm
-    gzio.c              GZIO     C     ZLIB - IO on .gz files
+    gzclose.c           GZCLOSE  C     ZLIB - Close .gz files
+    gzlib.c             GZLIB    C     ZLIB - Miscellaneous .gz files IO support
+    gzread.c            GZREAD   C     ZLIB - Read .gz files
+    gzwrite.c           GZWRITE  C     ZLIB - Write .gz files
    infback.c           INFBACK  C     ZLIB - Inflate using a callback interface
    inffast.c           INFFAST  C     ZLIB - Fast proc. literals & length/distance pairs
    inflate.c           INFLATE  C     ZLIB - Interface to inflate modules
@@ -81,6 +84,7 @@ II) From the original source distribution:
                H                      Original ZLIB C and ILE/RPG include files
    crc32.h             CRC32    C     ZLIB - CRC32 tables
    deflate.h           DEFLATE  C     ZLIB - Internal compression state
+    gzguts.h            GZGUTS   C     ZLIB - Definitions for the gzclose module
    inffast.h           INFFAST  C     ZLIB - Header to use inffast.c
    inffixed.h          INFFIXED C     ZLIB - Table for decoding fixed codes
    inflate.h           INFLATE  C     ZLIB - Internal inflate state definitions
@@ -108,4 +112,4 @@ Notes:  For AS400 ILE RPG programmers, a /copy member defining the ZLIB
                implementation does not handle conversion from/to ASCII, so
                text data code conversions must be done explicitely.

-        Always open zipped files in binary mode.
+        Mainly for the reason above, always open zipped files in binary mode.
--- a/old/as400/zlib.inc
+++ b/old/as400/zlib.inc
@@ -1,7 +1,7 @@
      *  ZLIB.INC - Interface to the general purpose compression library
      *
      *  ILE RPG400 version by Patrick Monnerat, DATASPHERE.
-      *  Version 1.2.3.9
+      *  Version 1.2.5.1
      *
      *
      *  WARNING:
@@ -22,16 +22,25 @@
      *
      *  Versioning information.
      *
-     D ZLIB_VERSION    C                   '1.2.3.9'
-     D ZLIB_VERNUM     C                   X'1239'
+     D ZLIB_VERSION    C                   '1.2.5.1'
+     D ZLIB_VERNUM     C                   X'1251'
+     D ZLIB_VER_MAJOR  C                   1
+     D ZLIB_VER_MINOR  C                   2
+     D ZLIB_VER_REVISION...
+     D                 C                   5
+     D ZLIB_VER_SUBREVISION...
+     D                 C                   0
      *
      *  Other equates.
      *
     D Z_NO_FLUSH      C                   0
+     D Z_PARTIAL_FLUSH...
+     D                 C                   1
     D Z_SYNC_FLUSH    C                   2
     D Z_FULL_FLUSH    C                   3
     D Z_FINISH        C                   4
     D Z_BLOCK         C                   5
+     D Z_TREES         C                   6
      *
     D Z_OK            C                   0
     D Z_STREAM_END    C                   1
@@ -72,6 +81,7 @@
     D z_streamp       S               *                                        Stream struct ptr
     D gzFile          S               *                                        File pointer
     D z_off_t         S             10i 0                                      Stream offsets
+     D z_off64_t       S             20i 0                                      Stream offsets
      *
      **************************************************************************
      *                               Structures
@@ -122,20 +132,36 @@
     D  source                    32767    const options(*varsize)              Source buffer
     D  sourceLen                    10U 0 value                                Source length
      *
+      /if not defined(LARGE_FILES)
     D gzopen          PR                  extproc('gzopen')
     D                                     like(gzFile)
     D  path                           *   value options(*string)               File pathname
     D  mode                           *   value options(*string)               Open mode
+      /else
+     D gzopen          PR                  extproc('gzopen64')
+     D                                     like(gzFile)
+     D  path                           *   value options(*string)               File pathname
+     D  mode                           *   value options(*string)               Open mode
+      *
+     D gzopen64        PR                  extproc('gzopen64')
+     D                                     like(gzFile)
+     D  path                           *   value options(*string)               File pathname
+     D  mode                           *   value options(*string)               Open mode
+      /endif
      *
     D gzdopen         PR                  extproc('gzdopen')
     D                                     like(gzFile)
-     D  fd                           10i 0 value                                File descriptor
+     D  fd                           10I 0 value                                File descriptor
     D  mode                           *   value options(*string)               Open mode
      *
+     D gzbuffer        PR            10I 0 extproc('gzbuffer')
+     D  file                               value like(gzFile)                   File pointer
+     D  size                         10U 0 value
+      *
     D gzsetparams     PR            10I 0 extproc('gzsetparams')
     D  file                               value like(gzFile)                   File pointer
     D  level                        10I 0 value
-     D  strategy                     10i 0 value
+     D  strategy                     10I 0 value
      *
     D gzread          PR            10I 0 extproc('gzread')
     D  file                               value like(gzFile)                   File pointer
@@ -160,20 +186,64 @@
     D  file                               value like(gzFile)                   File pointer
     D  flush                        10I 0 value                                Type of flush
      *
+      /if not defined(LARGE_FILES)
     D gzseek          PR                  extproc('gzseek')
     D                                     like(z_off_t)
     D  file                               value like(gzFile)                   File pointer
     D  offset                             value like(z_off_t)                  Offset
     D  whence                       10i 0 value                                Origin
+      /else
+     D gzseek          PR                  extproc('gzseek64')
+     D                                     like(z_off_t)
+     D  file                               value like(gzFile)                   File pointer
+     D  offset                             value like(z_off_t)                  Offset
+     D  whence                       10i 0 value                                Origin
+      *
+     D gzseek64        PR                  extproc('gzseek64')
+     D                                     like(z_off64_t)
+     D  file                               value like(gzFile)                   File pointer
+     D  offset                             value like(z_off64_t)                Offset
+     D  whence                       10i 0 value                                Origin
+      /endif
      *
     D gzrewind        PR            10i 0 extproc('gzrewind')
     D  file                               value like(gzFile)                   File pointer
      *
+      /if not defined(LARGE_FILES)
     D gztell          PR                  extproc('gztell')
     D                                     like(z_off_t)
     D  file                               value like(gzFile)                   File pointer
+      /else
+     D gztell          PR                  extproc('gztell64')
+     D                                     like(z_off_t)
+     D  file                               value like(gzFile)                   File pointer
+      *
+     D gztell64        PR                  extproc('gztell64')
+     D                                     like(z_off64_t)
+     D  file                               value like(gzFile)                   File pointer
+      /endif
+      *
+      /if not defined(LARGE_FILES)
+     D gzoffset        PR                  extproc('gzoffset')
+     D                                     like(z_off_t)
+     D  file                               value like(gzFile)                   File pointer
+      /else
+     D gzoffset        PR                  extproc('gzoffset64')
+     D                                     like(z_off_t)
+     D  file                               value like(gzFile)                   File pointer
+      *
+     D gzoffset64      PR                  extproc('gzoffset64')
+     D                                     like(z_off64_t)
+     D  file                               value like(gzFile)                   File pointer
+      /endif
      *
     D gzeof           PR            10i 0 extproc('gzeof')
+     D  file                               value like(gzFile)                   File pointer
+      *
+     D gzclose_r       PR            10i 0 extproc('gzclose_r')
+     D  file                               value like(gzFile)                   File pointer
+      *
+     D gzclose_w       PR            10i 0 extproc('gzclose_w')
     D  file                               value like(gzFile)                   File pointer
      *
     D gzclose         PR            10i 0 extproc('gzclose')
@@ -253,6 +323,11 @@
     D  strm                               like(z_stream)                       Compression stream
     D  sourcelen                    10U 0 value                                Compression level
      *
+     D deflatePending  PR            10I 0 extproc('deflatePending')            Change level & strat
+     D  strm                               like(z_stream)                       Compression stream
+     D  pending                      10U 0                                      Pending bytes
+     D  bits                         10I 0                                      Pending bits
+      *
     D deflatePrime    PR            10I 0 extproc('deflatePrime')              Change level & strat
     D  strm                               like(z_stream)                       Compression stream
     D  bits                         10I 0 value                                Number of bits to insert
@@ -278,6 +353,18 @@
     D  source                             like(z_stream)                       Source stream
      *
     D inflateReset    PR            10I 0 extproc('inflateReset')              End and init. stream
+     D  strm                               like(z_stream)                       Expansion stream
+      *
+     D inflateReset2   PR            10I 0 extproc('inflateReset2')             End and init. stream
+     D  strm                               like(z_stream)                       Expansion stream
+     D  windowBits                   10I 0 value                                Log2(buffer size)
+      *
+     D inflatePrime    PR            10I 0 extproc('inflatePrime')              Insert bits
+     D  strm                               like(z_stream)                       Expansion stream
+     D  bits                         10I 0 value                                Bit count
+     D  value                        10I 0 value                                Bits to insert
+      *
+     D inflateMark     PR            10I 0 extproc('inflateMark')               Get inflate info
     D  strm                               like(z_stream)                       Expansion stream
      *
     D inflateBackInit...
@@ -328,4 +415,9 @@
      *
     D get_crc_table   PR              *   extproc('get_crc_table')             Ptr to ulongs
      *
+     D inflateUndermine...
+     D                 PR            10I 0 extproc('inflateUndermine')
+     D  strm                               like(z_stream)                       Expansion stream
+     D  arg                          10I 0 value                                Error code
+      *
      /endif
--- a/121
+++ b/121
@@ -13,43 +13,43 @@
 # If you have problems, try without defining CC and CFLAGS before reporting
 # an error.

-# make sure we are running under a compatible shell (stolen from ffmpeg and libnfo)
-if test "0$ZLIB_CONFIGURE_EXEC" -lt 1; then
-  unset foo
-  (: ${foo%%bar}) 2>/dev/null && ! (: ${foo?}) 2>/dev/null
-  if test "$?" -ne 0; then
-    ZLIB_CONFIGURE_EXEC=1
-    export ZLIB_CONFIGURE_EXEC
-    type "bash" > /dev/null 2>&1 && exec bash "$0" "$@"
-    type "ksh" > /dev/null 2>&1 && exec ksh "$0" "$@"
-    if test -x /usr/xpg4/bin/sh; then
-      exec /usr/xpg4/bin/sh "$0" "$@"
-    fi
-#    echo "No compatible shell script interpreter found."
-#    exit 1
-# we could give up here, but go ahead and give their old sh a try
-  fi
-fi
-
 if [ -n "${CHOST}" ]; then
-    uname="$(echo "${CHOST}" | sed 's/.*-.*-\(.*\)-.*/\1/')"
+    uname="`echo "${CHOST}" | sed -e 's/^[^-]*-\([^-]*\)$/\1/' -e 's/^[^-]*-[^-]*-\([^-]*\)$/\1/' -e 's/^[^-]*-[^-]*-\([^-]*\)-.*$/\1/'`"
    CROSS_PREFIX="${CHOST}-"
 fi

 STATICLIB=libz.a
-LDFLAGS="${LDFLAGS} -L. ${STATICLIB}"
 VER=`sed -n -e '/VERSION "/s/.*"\(.*\)".*/\1/p' < zlib.h`
 VER3=`sed -n -e '/VERSION "/s/.*"\([0-9]*\\.[0-9]*\\.[0-9]*\).*/\1/p' < zlib.h`
 VER2=`sed -n -e '/VERSION "/s/.*"\([0-9]*\\.[0-9]*\)\\..*/\1/p' < zlib.h`
 VER1=`sed -n -e '/VERSION "/s/.*"\([0-9]*\)\\..*/\1/p' < zlib.h`
-AR=${AR-"${CROSS_PREFIX}ar"}
+if "${CROSS_PREFIX}ar" --version >/dev/null 2>/dev/null || test $? -lt 126; then
+    AR=${AR-"${CROSS_PREFIX}ar"}
+    test -n "${CROSS_PREFIX}" && echo Using ${AR}
+else
+    AR=${AR-"ar"}
+    test -n "${CROSS_PREFIX}" && echo Using ${AR}
+fi
 AR_RC="${AR} rc"
-RANLIB=${RANLIB-"${CROSS_PREFIX}ranlib"}
+if "${CROSS_PREFIX}ranlib" --version >/dev/null 2>/dev/null || test $? -lt 126; then
+    RANLIB=${RANLIB-"${CROSS_PREFIX}ranlib"}
+    test -n "${CROSS_PREFIX}" && echo Using ${RANLIB}
+else
+    RANLIB=${RANLIB-"ranlib"}
+fi
+if "${CROSS_PREFIX}nm" --version >/dev/null 2>/dev/null || test $? -lt 126; then
+    NM=${NM-"${CROSS_PREFIX}nm"}
+    test -n "${CROSS_PREFIX}" && echo Using ${NM}
+else
+    NM=${NM-"nm"}
+fi
 LDCONFIG=${LDCONFIG-"ldconfig"}
-LDSHAREDLIBC="${LDSHAREDLIBC-"-lc"}"
+LDSHAREDLIBC="${LDSHAREDLIBC--lc}"
+ARCHS=
 prefix=${prefix-/usr/local}
 exec_prefix=${exec_prefix-'${prefix}'}
 libdir=${libdir-'${exec_prefix}/lib'}
+sharedlibdir=${sharedlibdir-'${libdir}'}
 includedir=${includedir-'${prefix}/include'}
 mandir=${mandir-'${prefix}/share/man'}
 shared_ext='.so'
@@ -66,11 +66,13 @@ case "$1" in
    -h* | --help)
      echo 'usage:'
      echo '  configure [--zprefix] [--prefix=PREFIX]  [--eprefix=EXPREFIX]'
-      echo '    [--static] [--64] [--libdir=LIBDIR] [--includedir=INCLUDEDIR]'
+      echo '    [--static] [--64] [--libdir=LIBDIR] [--sharedlibdir=LIBDIR]'
+      echo '    [--includedir=INCLUDEDIR] [--archs="-arch i386 -arch x86_64"]'
        exit 0 ;;
    -p*=* | --prefix=*) prefix=`echo $1 | sed 's/.*=//'`; shift ;;
    -e*=* | --eprefix=*) exec_prefix=`echo $1 | sed 's/.*=//'`; shift ;;
    -l*=* | --libdir=*) libdir=`echo $1 | sed 's/.*=//'`; shift ;;
+    --sharedlibdir=*) sharedlibdir=`echo $1 | sed 's/.*=//'`; shift ;;
    -i*=* | --includedir=*) includedir=`echo $1 | sed 's/.*=//'`;shift ;;
    -u*=* | --uname=*) uname=`echo $1 | sed 's/.*=//'`;shift ;;
    -p* | --prefix) prefix="$2"; shift; shift ;;
@@ -81,6 +83,7 @@ case "$1" in
    -t | --static) shared=0; shift ;;
    -z* | --zprefix) zprefix=1; shift ;;
    -6* | --64) build64=1; shift ;;
+    -a*=* | --archs=*) ARCHS=`echo $1 | sed 's/.*=//'`; shift ;;
    --sysconfdir=*) echo "ignored option: --sysconfdir"; shift ;;
    --localstatedir=*) echo "ignored option: --localstatedir"; shift ;;
    *) echo "unknown option: $1"; echo "$0 --help for help"; exit 1 ;;
@@ -93,18 +96,22 @@ extern int getchar();
 int hello() {return getchar();}
 EOF

-test -z "$CC" && echo Checking for gcc...
+test -z "$CC" && echo Checking for ${CROSS_PREFIX}gcc...
 cc=${CC-${CROSS_PREFIX}gcc}
 cflags=${CFLAGS-"-O3"}
 # to force the asm version use: CFLAGS="-O3 -DASMV" ./configure
 case "$cc" in
  *gcc*) gcc=1 ;;
 esac
+case `$cc -v 2>&1` in
+  *gcc*) gcc=1 ;;
+esac

 if test "$gcc" -eq 1 && ($cc -c $cflags $test.c) 2>/dev/null; then
  CC="$cc"
-  SFLAGS="${CFLAGS-"-O3"} -fPIC"
-  CFLAGS="${CFLAGS-"-O3"}"
+  CFLAGS="${CFLAGS--O3} ${ARCHS}"
+  SFLAGS="${CFLAGS--O3} -fPIC"
+  LDFLAGS="${LDFLAGS} ${ARCHS}"
  if test $build64 -eq 1; then
    CFLAGS="${CFLAGS} -m64"
    SFLAGS="${SFLAGS} -m64"
@@ -116,10 +123,16 @@ if test "$gcc" -eq 1 && ($cc -c $cflags $test.c) 2>/dev/null; then
    uname=`(uname -s || echo unknown) 2>/dev/null`
  fi
  case "$uname" in
-  Linux* | linux* | GNU | GNU/* | *BSD | DragonFly) LDSHARED=${LDSHARED-"$cc -shared -Wl,-soname,libz.so.1,--version-script,zlib.map"} ;;
+  Linux* | linux* | GNU | GNU/* | *BSD | *bsd* | DragonFly | solaris*)
+        LDSHARED=${LDSHARED-"$cc -shared -Wl,-soname,libz.so.1,--version-script,zlib.map"} ;;
  CYGWIN* | Cygwin* | cygwin* | OS/2*)
        EXE='.exe' ;;
-  MINGW*)
+  MINGW* | mingw*)
+# temporary bypass
+        rm -f $test.[co] $test $test$shared_ext
+        echo "Please use win32/Makefile.gcc instead."
+        exit 1
+        LDSHARED=${LDSHARED-"$cc -shared"}
        LDSHAREDLIBC=""
        EXE='.exe' ;;
  QNX*)  # This is for QNX6. I suppose that the QNX rule below is for QNX2,QNX4
@@ -135,16 +148,20 @@ if test "$gcc" -eq 1 && ($cc -c $cflags $test.c) 2>/dev/null; then
                 shared_ext='.sl'
                 SHAREDLIB='libz.sl' ;;
         esac ;;
-  Darwin*)   shared_ext='.dylib'
+  Darwin* | darwin*)
+             shared_ext='.dylib'
             SHAREDLIB=libz$shared_ext
             SHAREDLIBV=libz.$VER$shared_ext
             SHAREDLIBM=libz.$VER1$shared_ext
-             LDSHARED=${LDSHARED-"$cc -dynamiclib -install_name $libdir/$SHAREDLIBM -compatibility_version $VER1 -current_version $VER3"} ;;
+             LDSHARED=${LDSHARED-"$cc -dynamiclib -install_name $libdir/$SHAREDLIBM -compatibility_version $VER1 -current_version $VER3"}
+             AR="libtool"
+             AR_RC="${AR} -o" ;;
  *)             LDSHARED=${LDSHARED-"$cc -shared"} ;;
  esac
 else
  # find system name and corresponding cc options
  CC=${CC-cc}
+  gcc=0
  if test -z "$uname"; then
    uname=`(uname -sr || echo unknown) 2>/dev/null`
  fi
@@ -179,7 +196,8 @@ else
  SCO_SV\ 3.2*) SFLAGS=${CFLAGS-"-O3 -dy -KPIC "}
             CFLAGS=${CFLAGS-"-O3"}
             LDSHARED=${LDSHARED-"cc -dy -KPIC -G"} ;;
-  SunOS\ 5*) LDSHARED=${LDSHARED-"cc -G"}
+  SunOS\ 5* | solaris*)
+         LDSHARED=${LDSHARED-"cc -G"}
         case `(uname -m || echo unknown) 2>/dev/null` in
         i86*)
             SFLAGS=${CFLAGS-"-xpentium -fast -KPIC -R."}
@@ -295,6 +313,18 @@ else
  echo "Checking for unistd.h... No."
 fi

+cat > $test.c <<EOF
+#include <stdarg.h>
+int main() { return 0; }
+EOF
+if test "`($CC -c $CFLAGS $test.c) 2>&1`" = ""; then
+  sed < zconf.h "/^#ifdef HAVE_STDARG_H.* may be/s/def HAVE_STDARG_H\(.*\) may be/ 1\1 was/" > zconf.temp.h
+  mv zconf.temp.h zconf.h
+  echo "Checking for stdarg.h... Yes."
+else
+  echo "Checking for stdarg.h... No."
+fi
+
 if test $zprefix -eq 1; then
  sed < zconf.h "/#ifdef Z_PREFIX.* may be/s/def Z_PREFIX\(.*\) may be/ 1\1 was/" > zconf.temp.h
  mv zconf.temp.h zconf.h
@@ -339,7 +369,6 @@ int main()
  return (mytest("Hello%d\n", 1));
 }
 EOF
-
  if test "`($CC $CFLAGS -o $test $test.c) 2>&1`" = ""; then
    echo "Checking for vsnprintf() in stdio.h... Yes."

@@ -502,10 +531,32 @@ EOF
  fi
 fi

+if test "$gcc" -eq 1; then
+  cat > $test.c <<EOF
+#if ((__GNUC__-0) * 10 + __GNUC_MINOR__-0 >= 33)
+#  define ZLIB_INTERNAL __attribute__((visibility ("hidden")))
+#else
+#  define ZLIB_INTERNAL
+#endif
+int ZLIB_INTERNAL foo;
+int main()
+{
+  return 0;
+}
+EOF
+  if test "`($CC -c $CFLAGS $test.c) 2>&1`" = ""; then
+    echo "Checking for attribute(visibility) support... Yes."
+  else
+    CFLAGS="$CFLAGS -DNO_VIZ"
+    SFLAGS="$SFLAGS -DNO_VIZ"
+    echo "Checking for attribute(visibility) support... No."
+  fi
+fi
+
 CPP=${CPP-"$CC -E"}
 case $CFLAGS in
  *ASMV*)
-    if test "`nm $test.o | grep _hello`" = ""; then
+    if test "`$NM $test.o | grep _hello`" = ""; then
      CPP="$CPP -DNO_UNDERLINE"
      echo Checking for underline in external names... No.
    else
@@ -535,6 +586,7 @@ sed < Makefile.in "
 /^prefix *=/s#=.*#=$prefix#
 /^exec_prefix *=/s#=.*#=$exec_prefix#
 /^libdir *=/s#=.*#=$libdir#
+/^sharedlibdir *=/s#=.*#=$sharedlibdir#
 /^includedir *=/s#=.*#=$includedir#
 /^mandir *=/s#=.*#=$mandir#
 /^all: */s#:.*#: $ALL#
@@ -556,6 +608,7 @@ sed < zlib.pc.in "
 /^prefix *=/s#=.*#=$prefix#
 /^exec_prefix *=/s#=.*#=$exec_prefix#
 /^libdir *=/s#=.*#=$libdir#
+/^sharedlibdir *=/s#=.*#=$sharedlibdir#
 /^includedir *=/s#=.*#=$includedir#
 /^mandir *=/s#=.*#=$mandir#
 /^LDFLAGS *=/s#=.*#=$LDFLAGS#
--- a/contrib/asm686/match.S
+++ b/contrib/asm686/match.S
@@ -83,17 +83,25 @@
 .text

 /* uInt longest_match(deflate_state *deflatestate, IPos curmatch) */
+.cfi_sections	.debug_frame

 longest_match:

+.cfi_startproc
 /* Save registers that the compiler may be using, and adjust %esp to	*/
 /* make room for our stack frame.					*/

 		pushl	%ebp
+		.cfi_def_cfa_offset 8
+		.cfi_offset ebp, -8
 		pushl	%edi
+		.cfi_def_cfa_offset 12
 		pushl	%esi
+		.cfi_def_cfa_offset 16
 		pushl	%ebx
+		.cfi_def_cfa_offset 20
 		subl	$LocalVarsSize, %esp
+		.cfi_def_cfa_offset LocalVarsSize+20

 /* Retrieve the function arguments. %ecx will hold cur_match		*/
 /* throughout the entire function. %edx will hold the pointer to the	*/
@@ -108,7 +116,7 @@ longest_match:
 /* if (s->prev_length >= s->good_match) {				*/
 /*     chain_length >>= 2;						*/
 /* }									*/
-
+ 
 		movl	dsPrevLen(%edx), %eax
 		movl	dsGoodMatch(%edx), %ebx
 		cmpl	%ebx, %eax
@@ -336,8 +344,14 @@ LookaheadRet:
 /* Restore the stack and return from whence we came.			*/

 		addl	$LocalVarsSize, %esp
+		.cfi_def_cfa_offset 20
 		popl	%ebx
+		.cfi_def_cfa_offset 16
 		popl	%esi
+		.cfi_def_cfa_offset 12
 		popl	%edi
+		.cfi_def_cfa_offset 8
 		popl	%ebp
+		.cfi_def_cfa_offset 4
+.cfi_endproc
 match_init:	ret
--- a/contrib/delphi/ZLib.pas
+++ b/contrib/delphi/ZLib.pas
@@ -152,7 +152,7 @@ procedure DecompressToUserBuf(const InBuf: Pointer; InBytes: Integer;
  const OutBuf: Pointer; BufSize: Integer);

 const
-  zlib_version = '1.2.4.1';
+  zlib_version = '1.2.5.1';

 type
  EZlibError = class(Exception);
--- a/contrib/dotzlib/DotZLib/UnitTests.cs
+++ b/contrib/dotzlib/DotZLib/UnitTests.cs
@@ -156,7 +156,7 @@ namespace DotZLibTests
        public void Info_Version()
        {
            Info info = new Info();
-            Assert.AreEqual("1.2.4.1", Info.Version);
+            Assert.AreEqual("1.2.5.1", Info.Version);
            Assert.AreEqual(32, info.SizeOfUInt);
            Assert.AreEqual(32, info.SizeOfULong);
            Assert.AreEqual(32, info.SizeOfPointer);
@@ -271,4 +271,4 @@ namespace DotZLibTests
 	}
 }

-#endif
+#endif
--- a/contrib/infback9/inftree9.c
+++ b/contrib/infback9/inftree9.c
@@ -9,7 +9,7 @@
 #define MAXBITS 15

 const char inflate9_copyright[] =
-   " inflate9 1.2.4.1 Copyright 1995-2010 Mark Adler ";
+   " inflate9 1.2.5.1 Copyright 1995-2010 Mark Adler ";
 /*
  If you use the zlib library in a product, an acknowledgment is welcome
  in the documentation of your product. If for some reason you cannot
@@ -64,7 +64,7 @@ unsigned short FAR *work;
    static const unsigned short lext[31] = { /* Length codes 257..285 extra */
        128, 128, 128, 128, 128, 128, 128, 128, 129, 129, 129, 129,
        130, 130, 130, 130, 131, 131, 131, 131, 132, 132, 132, 132,
-        133, 133, 133, 133, 144, 67, 206};
+        133, 133, 133, 133, 144, 205, 203};
    static const unsigned short dbase[32] = { /* Distance codes 0..31 base */
        1, 2, 3, 4, 5, 7, 9, 13, 17, 25, 33, 49,
        65, 97, 129, 193, 257, 385, 513, 769, 1025, 1537, 2049, 3073,
--- a/contrib/masmx64/readme.txt
+++ b/contrib/masmx64/readme.txt
@@ -12,10 +12,10 @@ inffasx64.asm and inffas8664.c were written by Chris Anderson, by optimizing

 Use instructions
 ----------------
-Assemble the .asm files using MASM and put the object files into the zlib source
-directory.  You can also get object files here:
-
-     http://www.winimage.com/zLibDll/zlib124_masm_obj.zip
+Assemble the .asm files using MASM and put the object files into the zlib source
+directory.  You can also get object files here:
+
+     http://www.winimage.com/zLibDll/zlib124_masm_obj.zip

 define ASMV and ASMINF in your project. Include inffas8664.c in your source tree,
 and inffasx64.obj and gvmat64.obj as object to link.
--- a/contrib/masmx86/inffas32.asm
+++ b/contrib/masmx86/inffas32.asm
@@ -73,11 +73,6 @@ inflate_fast_use_mmx:


 _TEXT			segment
-PUBLIC _inflate_fast
-
-ALIGN 4
-_inflate_fast:
-	jmp inflate_fast_entry



@@ -163,7 +158,8 @@ distbits_state	 equ	(76+4+zlib1222sup)	;/* state->distbits */
 ;SECTION .text

 ALIGN 4
-inflate_fast_entry:
+_inflate_fast proc near
+.FPO (16, 4, 0, 0, 1, 0)
 	push  edi
 	push  esi
 	push  ebp
@@ -1078,6 +1074,7 @@ L_done:
 	pop  esi
 	pop  edi
 	ret
+_inflate_fast endp

 _TEXT	ends
 end
--- a/contrib/masmx86/match686.asm
+++ b/contrib/masmx86/match686.asm
@@ -195,6 +195,7 @@ dsNiceMatch equ 136+zlib1222add
    ELSE
    _longest_match      proc near
    ENDIF
+.FPO (9, 4, 0, 0, 1, 0)

 ;;; Save registers that the compiler may be using, and adjust esp to
 ;;; make room for our stack frame.
--- a/contrib/masmx86/readme.txt
+++ b/contrib/masmx86/readme.txt
@@ -1,27 +1,27 @@
-
-Summary
-------
-This directory contains ASM implementations of the functions
-longest_match() and inflate_fast().
-
-
-Use instructions
----------------
-Assemble using MASM, and copy the object files into the zlib source
-directory, then run the appropriate makefile, as suggested below.  You can
-donwload MASM from here:
-
+
+Summary
+-------
+This directory contains ASM implementations of the functions
+longest_match() and inflate_fast().
+
+
+Use instructions
+----------------
+Assemble using MASM, and copy the object files into the zlib source
+directory, then run the appropriate makefile, as suggested below.  You can
+donwload MASM from here:
+
    http://www.microsoft.com/downloads/details.aspx?displaylang=en&FamilyID=7a1c9da0-0510-44a2-b042-7ef370530c64
-
-You can also get objects files here:
-
-    http://www.winimage.com/zLibDll/zlib124_masm_obj.zip
-
-Build instructions
------------------
-* With Microsoft C and MASM:
-nmake -f win32/Makefile.msc LOC="-DASMV -DASMINF" OBJA="match686.obj inffas32.obj"
-
-* With Borland C and TASM:
-make -f win32/Makefile.bor LOCAL_ZLIB="-DASMV -DASMINF" OBJA="match686.obj inffas32.obj" OBJPA="+match686c.obj+match686.obj+inffas32.obj"
-
+
+You can also get objects files here:
+
+    http://www.winimage.com/zLibDll/zlib124_masm_obj.zip
+
+Build instructions
+------------------
+* With Microsoft C and MASM:
+nmake -f win32/Makefile.msc LOC="-DASMV -DASMINF" OBJA="match686.obj inffas32.obj"
+
+* With Borland C and TASM:
+make -f win32/Makefile.bor LOCAL_ZLIB="-DASMV -DASMINF" OBJA="match686.obj inffas32.obj" OBJPA="+match686c.obj+match686.obj+inffas32.obj"
+
--- a/contrib/minizip/ioapi.c
+++ b/contrib/minizip/ioapi.c
@@ -14,6 +14,18 @@
        #define _CRT_SECURE_NO_WARNINGS
 #endif

+#ifdef __APPLE__
+// In darwin and perhaps other BSD variants off_t is a 64 bit value, hence no need for specific 64 bit functions
+#define FOPEN_FUNC(filename, mode) fopen(filename, mode)
+#define FTELLO_FUNC(stream) ftello(stream)
+#define FSEEKO_FUNC(stream, offset, origin) fseeko(stream, offset, origin)
+#else
+#define FOPEN_FUNC(filename, mode) fopen64(filename, mode)
+#define FTELLO_FUNC(stream) ftello64(stream)
+#define FSEEKO_FUNC(stream, offset, origin) fseeko64(stream, offset, origin)
+#endif
+
+
 #include "ioapi.h"

 voidpf call_zopen64 (const zlib_filefunc64_32_def* pfilefunc,const void*filename,int mode)
@@ -112,7 +124,7 @@ static voidpf ZCALLBACK fopen64_file_func (voidpf opaque, const void* filename,
        mode_fopen = "wb";

    if ((filename!=NULL) && (mode_fopen != NULL))
-        file = fopen64((const char*)filename, mode_fopen);
+        file = FOPEN_FUNC((const char*)filename, mode_fopen);
    return file;
 }

@@ -142,7 +154,7 @@ static long ZCALLBACK ftell_file_func (voidpf opaque, voidpf stream)
 static ZPOS64_T ZCALLBACK ftell64_file_func (voidpf opaque, voidpf stream)
 {
    ZPOS64_T ret;
-    ret = ftello64((FILE *)stream);
+    ret = FTELLO_FUNC((FILE *)stream);
    return ret;
 }

@@ -188,7 +200,7 @@ static long ZCALLBACK fseek64_file_func (voidpf  opaque, voidpf stream, ZPOS64_T
    }
    ret = 0;

-    if(fseeko64((FILE *)stream, offset, fseek_origin) != 0)
+    if(FSEEKO_FUNC((FILE *)stream, offset, fseek_origin) != 0)
                        ret = -1;

    return ret;
--- a/contrib/minizip/ioapi.h
+++ b/contrib/minizip/ioapi.h
@@ -21,7 +21,7 @@
 #ifndef _ZLIBIOAPI64_H
 #define _ZLIBIOAPI64_H

-#if (!defined(_WIN32)) && (!defined(WIN32))
+#if (!defined(_WIN32)) && (!defined(WIN32)) && (!defined(__APPLE__))

  // Linux needs this to support file operation on files larger then 4+GB
  // But might need better if/def to select just the platforms that needs them.
@@ -38,6 +38,7 @@
        #ifndef _FILE_OFFSET_BIT
                #define _FILE_OFFSET_BIT 64
        #endif
+
 #endif

 #include <stdio.h>
--- a/contrib/minizip/miniunz.c
+++ b/contrib/minizip/miniunz.c
@@ -12,7 +12,7 @@
         Copyright (C) 2009-2010 Mathias Svensson ( http://result42.com )
 */

-#ifndef _WIN32
+#if (!defined(_WIN32)) && (!defined(WIN32)) && (!defined(__APPLE__))
        #ifndef __USE_FILE_OFFSET64
                #define __USE_FILE_OFFSET64
        #endif
@@ -27,6 +27,18 @@
        #endif
 #endif

+#ifdef __APPLE__
+// In darwin and perhaps other BSD variants off_t is a 64 bit value, hence no need for specific 64 bit functions
+#define FOPEN_FUNC(filename, mode) fopen(filename, mode)
+#define FTELLO_FUNC(stream) ftello(stream)
+#define FSEEKO_FUNC(stream, offset, origin) fseeko(stream, offset, origin)
+#else
+#define FOPEN_FUNC(filename, mode) fopen64(filename, mode)
+#define FTELLO_FUNC(stream) ftello64(stream)
+#define FSEEKO_FUNC(stream, offset, origin) fseeko64(stream, offset, origin)
+#endif
+
+
 #include <stdio.h>
 #include <stdlib.h>
 #include <string.h>
@@ -34,14 +46,15 @@
 #include <errno.h>
 #include <fcntl.h>

-#ifdef unix
-# include <unistd.h>
-# include <utime.h>
-#else
+#ifdef _WIN32
 # include <direct.h>
 # include <io.h>
+#else
+# include <unistd.h>
+# include <utime.h>
 #endif

+
 #include "unzip.h"

 #define CASESENSITIVITY (0)
@@ -84,7 +97,7 @@ void change_file_date(filename,dosdate,tmu_date)
  SetFileTime(hFile,&ftm,&ftLastAcc,&ftm);
  CloseHandle(hFile);
 #else
-#ifdef unix
+#ifdef unix || __APPLE__
  struct utimbuf ut;
  struct tm newdate;
  newdate.tm_sec = tmu_date.tm_sec;
@@ -114,10 +127,10 @@ int mymkdir(dirname)
    int ret=0;
 #ifdef _WIN32
    ret = _mkdir(dirname);
-#else
-#ifdef unix
+#elif unix
+    ret = mkdir (dirname,0775);
+#elif __APPLE__
    ret = mkdir (dirname,0775);
-#endif
 #endif
    return ret;
 }
@@ -364,7 +377,7 @@ int do_extract_currentfile(uf,popt_extract_without_path,popt_overwrite,password)
        {
            char rep=0;
            FILE* ftestexist;
-            ftestexist = fopen64(write_filename,"rb");
+            ftestexist = FOPEN_FUNC(write_filename,"rb");
            if (ftestexist!=NULL)
            {
                fclose(ftestexist);
@@ -395,8 +408,7 @@ int do_extract_currentfile(uf,popt_extract_without_path,popt_overwrite,password)

        if ((skip==0) && (err==UNZ_OK))
        {
-            fout=fopen64(write_filename,"wb");
-
+            fout=FOPEN_FUNC(write_filename,"wb");
            /* some zipfile don't contain directory alone before file */
            if ((fout==NULL) && ((*popt_extract_without_path)==0) &&
                                (filename_withoutpath!=(char*)filename_inzip))
@@ -405,7 +417,7 @@ int do_extract_currentfile(uf,popt_extract_without_path,popt_overwrite,password)
                *(filename_withoutpath-1)='\0';
                makedir(write_filename);
                *(filename_withoutpath-1)=c;
-                fout=fopen64(write_filename,"wb");
+                fout=FOPEN_FUNC(write_filename,"wb");
            }

            if (fout==NULL)
--- a/contrib/minizip/minizip.c
+++ b/contrib/minizip/minizip.c
@@ -13,7 +13,7 @@
 */


-#ifndef _WIN32
+#if (!defined(_WIN32)) && (!defined(WIN32)) && (!defined(__APPLE__))
        #ifndef __USE_FILE_OFFSET64
                #define __USE_FILE_OFFSET64
        #endif
@@ -28,6 +28,19 @@
        #endif
 #endif

+#ifdef __APPLE__
+// In darwin and perhaps other BSD variants off_t is a 64 bit value, hence no need for specific 64 bit functions
+#define FOPEN_FUNC(filename, mode) fopen(filename, mode)
+#define FTELLO_FUNC(stream) ftello(stream)
+#define FSEEKO_FUNC(stream, offset, origin) fseeko(stream, offset, origin)
+#else
+#define FOPEN_FUNC(filename, mode) fopen64(filename, mode)
+#define FTELLO_FUNC(stream) ftello64(stream)
+#define FSEEKO_FUNC(stream, offset, origin) fseeko64(stream, offset, origin)
+#endif
+
+
+
 #include <stdio.h>
 #include <stdlib.h>
 #include <string.h>
@@ -35,14 +48,14 @@
 #include <errno.h>
 #include <fcntl.h>

-#ifdef unix
+#ifdef _WIN32
+# include <direct.h>
+# include <io.h>
+#else
 # include <unistd.h>
 # include <utime.h>
 # include <sys/types.h>
 # include <sys/stat.h>
-#else
-# include <direct.h>
-# include <io.h>
 #endif

 #include "zip.h"
@@ -81,7 +94,7 @@ uLong filetime(f, tmzip, dt)
  return ret;
 }
 #else
-#ifdef unix
+#ifdef unix || __APPLE__
 uLong filetime(f, tmzip, dt)
    char *f;               /* name of file to get info on */
    tm_zip *tmzip;         /* return value: access, modific. and creation times */
@@ -142,7 +155,7 @@ int check_exist_file(filename)
 {
    FILE* ftestexist;
    int ret = 1;
-    ftestexist = fopen64(filename,"rb");
+    ftestexist = FOPEN_FUNC(filename,"rb");
    if (ftestexist==NULL)
        ret = 0;
    else
@@ -173,7 +186,8 @@ int getFileCrc(const char* filenameinzip,void*buf,unsigned long size_buf,unsigne
 {
   unsigned long calculate_crc=0;
   int err=ZIP_OK;
-   FILE * fin = fopen64(filenameinzip,"rb");
+   FILE * fin = FOPEN_FUNC(filenameinzip,"rb");
+   
   unsigned long size_read = 0;
   unsigned long total_read = 0;
   if (fin==NULL)
@@ -211,13 +225,12 @@ int isLargeFile(const char* filename)
 {
  int largeFile = 0;
  ZPOS64_T pos = 0;
-  FILE* pFile = fopen64(filename, "rb");
+  FILE* pFile = FOPEN_FUNC(filename, "rb");

  if(pFile != NULL)
  {
-    int n = fseeko64(pFile, 0, SEEK_END);
-
-    pos = ftello64(pFile);
+    int n = FSEEKO_FUNC(pFile, 0, SEEK_END);
+    pos = FTELLO_FUNC(pFile);

                printf("File : %s is %lld bytes\n", filename, pos);

@@ -447,7 +460,7 @@ int main(argc,argv)
                    printf("error in opening %s in zipfile\n",filenameinzip);
                else
                {
-                    fin = fopen64(filenameinzip,"rb");
+                    fin = FOPEN_FUNC(filenameinzip,"rb");
                    if (fin==NULL)
                    {
                        err=ZIP_ERRNO;
--- a/contrib/minizip/unzip.c
+++ b/contrib/minizip/unzip.c
@@ -1145,7 +1145,7 @@ extern int ZEXPORT unzGetCurrentFileInfo (unzFile file,
                                                szFileName,fileNameBufferSize,
                                                extraField,extraFieldBufferSize,
                                                szComment,commentBufferSize);
-    if (err==UNZ_OK)
+    if ((err==UNZ_OK) && (pfile_info != NULL))
    {
        pfile_info->version = file_info64.version;
        pfile_info->version_needed = file_info64.version_needed;
--- a/contrib/pascal/zlibpas.pas
+++ b/contrib/pascal/zlibpas.pas
@@ -10,7 +10,7 @@ unit zlibpas;
 interface

 const
-  ZLIB_VERSION = '1.2.4.1';
+  ZLIB_VERSION = '1.2.5.1';

 type
  alloc_func = function(opaque: Pointer; items, size: Integer): Pointer;
@@ -97,6 +97,7 @@ function deflateCopy(var dest, source: z_stream): Integer;
 function deflateReset(var strm: z_stream): Integer;
 function deflateParams(var strm: z_stream; level, strategy: Integer): Integer;
 function deflateBound(var strm: z_stream; sourceLen: LongInt): LongInt;
+function deflatePending(var strm: z_stream; var pending: Integer; var bits: Integer): Integer;
 function deflatePrime(var strm: z_stream; bits, value: Integer): Integer;
 function inflateInit2(var strm: z_stream; windowBits: Integer): Integer;
 function inflateSetDictionary(var strm: z_stream; const dictionary: PChar;
@@ -166,6 +167,7 @@ function deflateEnd; external;
 function deflateInit_; external;
 function deflateInit2_; external;
 function deflateParams; external;
+function deflatePending; external;
 function deflatePrime; external;
 function deflateReset; external;
 function deflateSetDictionary; external;
--- a/contrib/puff/Makefile
+++ b/contrib/puff/Makefile
@@ -1,8 +1,42 @@
-puff: puff.c puff.h
-	cc -DTEST -o puff puff.c
+CFLAGS=-O
+
+puff: puff.o pufftest.o
+
+puff.o: puff.h
+
+pufftest.o: puff.h

 test: puff
 	puff zeros.raw

+puft: puff.c puff.h pufftest.o
+	cc -fprofile-arcs -ftest-coverage -o puft puff.c pufftest.o
+
+# puff full coverage test (should say 100%)
+cov: puft
+	@rm -f *.gcov *.gcda
+	@puft -w zeros.raw 2>&1 | cat > /dev/null
+	@echo '04' | xxd -r -p | puft 2> /dev/null || test $$? -eq 2
+	@echo '00' | xxd -r -p | puft 2> /dev/null || test $$? -eq 2
+	@echo '00 00 00 00 00' | xxd -r -p | puft 2> /dev/null || test $$? -eq 254
+	@echo '00 01 00 fe ff' | xxd -r -p | puft 2> /dev/null || test $$? -eq 2
+	@echo '01 01 00 fe ff 0a' | xxd -r -p | puft -f 2>&1 | cat > /dev/null
+	@echo '02 7e ff ff' | xxd -r -p | puft 2> /dev/null || test $$? -eq 246
+	@echo '02' | xxd -r -p | puft 2> /dev/null || test $$? -eq 2
+	@echo '04 80 49 92 24 49 92 24 0f b4 ff ff c3 04' | xxd -r -p | puft 2> /dev/null || test $$? -eq 2
+	@echo '04 80 49 92 24 49 92 24 71 ff ff 93 11 00' | xxd -r -p | puft 2> /dev/null || test $$? -eq 249
+	@echo '04 c0 81 08 00 00 00 00 20 7f eb 0b 00 00' | xxd -r -p | puft 2> /dev/null || test $$? -eq 246
+	@echo '0b 00 00' | xxd -r -p | puft -f 2>&1 | cat > /dev/null
+	@echo '1a 07' | xxd -r -p | puft 2> /dev/null || test $$? -eq 246
+	@echo '0c c0 81 00 00 00 00 00 90 ff 6b 04' | xxd -r -p | puft 2> /dev/null || test $$? -eq 245
+	@puft -f zeros.raw 2>&1 | cat > /dev/null
+	@echo 'fc 00 00' | xxd -r -p | puft 2> /dev/null || test $$? -eq 253
+	@echo '04 00 fe ff' | xxd -r -p | puft 2> /dev/null || test $$? -eq 252
+	@echo '04 00 24 49' | xxd -r -p | puft 2> /dev/null || test $$? -eq 251
+	@echo '04 80 49 92 24 49 92 24 0f b4 ff ff c3 84' | xxd -r -p | puft 2> /dev/null || test $$? -eq 248
+	@echo '04 00 24 e9 ff ff' | xxd -r -p | puft 2> /dev/null || test $$? -eq 250
+	@echo '04 00 24 e9 ff 6d' | xxd -r -p | puft 2> /dev/null || test $$? -eq 247
+	@gcov -n puff.c
+
 clean:
-	rm -f puff puff.o
+	rm -f puff puft *.o *.gc*
--- a/contrib/puff/puff.c
+++ b/contrib/puff/puff.c
@@ -1,8 +1,8 @@
 /*
 * puff.c
- * Copyright (C) 2002-2008 Mark Adler
+ * Copyright (C) 2002-2010 Mark Adler
 * For conditions of distribution and use, see copyright notice in puff.h
- * version 2.0, 25 Jul 2008
+ * version 2.2, 25 Apr 2010
 *
 * puff.c is a simple inflate written to be an unambiguous way to specify the
 * deflate format.  It is not written for speed but rather simplicity.  As a
@@ -49,9 +49,9 @@
 *                      - Fix fixed codes table error
 *                      - Provide a scanning mode for determining size of
 *                        uncompressed data
- * 1.3  20 Mar 2002     - Go back to lengths for puff() parameters [Jean-loup]
+ * 1.3  20 Mar 2002     - Go back to lengths for puff() parameters [Gailly]
 *                      - Add a puff.h file for the interface
- *                      - Add braces in puff() for else do [Jean-loup]
+ *                      - Add braces in puff() for else do [Gailly]
 *                      - Use indexes instead of pointers for readability
 * 1.4  31 Mar 2002     - Simplify construct() code set check
 *                      - Fix some comments
@@ -67,13 +67,21 @@
 *                      - Add option in TEST code for puff to write the data
 *                      - Add option in TEST code to skip input bytes
 *                      - Allow TEST code to read from piped stdin
+ * 2.1   4 Apr 2010     - Avoid variable initialization for happier compilers
+ *                      - Avoid unsigned comparisons for even happier compilers
+ * 2.2  25 Apr 2010     - Fix bug in variable initializations [Oberhumer]
+ *                      - Add const where appropriate [Oberhumer]
+ *                      - Split if's and ?'s for coverage testing
+ *                      - Break out test code to separate file
+ *                      - Move NIL to puff.h
+ *                      - Allow incomplete code only if single code length is 1
+ *                      - Add full code coverage test to Makefile
 */

 #include <setjmp.h>             /* for setjmp(), longjmp(), and jmp_buf */
 #include "puff.h"               /* prototype for puff() */

 #define local static            /* for local function definitions */
-#define NIL ((unsigned char *)0)        /* for no output option */

 /*
 * Maximums for allocations and loops.  It is not useful to change these --
@@ -93,7 +101,7 @@ struct state {
    unsigned long outcnt;       /* bytes written to out so far */

    /* input state */
-    unsigned char *in;          /* input buffer */
+    const unsigned char *in;    /* input buffer */
    unsigned long inlen;        /* available input at in */
    unsigned long incnt;        /* bytes read so far */
    int bitbuf;                 /* bit buffer */
@@ -121,7 +129,8 @@ local int bits(struct state *s, int need)
    /* load at least need bits into val */
    val = s->bitbuf;
    while (s->bitcnt < need) {
-        if (s->incnt == s->inlen) longjmp(s->env, 1);   /* out of input */
+        if (s->incnt == s->inlen)
+            longjmp(s->env, 1);         /* out of input */
        val |= (long)(s->in[s->incnt++]) << s->bitcnt;  /* load eight bits */
        s->bitcnt += 8;
    }
@@ -160,7 +169,8 @@ local int stored(struct state *s)
    s->bitcnt = 0;

    /* get length and check against its one's complement */
-    if (s->incnt + 4 > s->inlen) return 2;      /* not enough input */
+    if (s->incnt + 4 > s->inlen)
+        return 2;                               /* not enough input */
    len = s->in[s->incnt++];
    len |= s->in[s->incnt++] << 8;
    if (s->in[s->incnt++] != (~len & 0xff) ||
@@ -168,7 +178,8 @@ local int stored(struct state *s)
        return -2;                              /* didn't match complement! */

    /* copy len bytes from in to out */
-    if (s->incnt + len > s->inlen) return 2;    /* not enough input */
+    if (s->incnt + len > s->inlen)
+        return 2;                               /* not enough input */
    if (s->out != NIL) {
        if (s->outcnt + len > s->outlen)
            return 1;                           /* not enough output space */
@@ -220,7 +231,7 @@ struct huffman {
 *   in the deflate format.  See the format notes for fixed() and dynamic().
 */
 #ifdef SLOW
-local int decode(struct state *s, struct huffman *h)
+local int decode(struct state *s, const struct huffman *h)
 {
    int len;            /* current number of bits in code */
    int code;           /* len bits being decoded */
@@ -248,7 +259,7 @@ local int decode(struct state *s, struct huffman *h)
 * a few percent larger.
 */
 #else /* !SLOW */
-local int decode(struct state *s, struct huffman *h)
+local int decode(struct state *s, const struct huffman *h)
 {
    int len;            /* current number of bits in code */
    int code;           /* len bits being decoded */
@@ -281,10 +292,13 @@ local int decode(struct state *s, struct huffman *h)
            len++;
        }
        left = (MAXBITS+1) - len;
-        if (left == 0) break;
-        if (s->incnt == s->inlen) longjmp(s->env, 1);   /* out of input */
+        if (left == 0)
+            break;
+        if (s->incnt == s->inlen)
+            longjmp(s->env, 1);         /* out of input */
        bitbuf = s->in[s->incnt++];
-        if (left > 8) left = 8;
+        if (left > 8)
+            left = 8;
    }
    return -10;                         /* ran out of codes */
 }
@@ -322,7 +336,7 @@ local int decode(struct state *s, struct huffman *h)
 * - Within a given code length, the symbols are kept in ascending order for
 *   the code bits definition.
 */
-local int construct(struct huffman *h, short *length, int n)
+local int construct(struct huffman *h, const short *length, int n)
 {
    int symbol;         /* current symbol when stepping through length[] */
    int len;            /* current length when stepping through h->count[] */
@@ -342,7 +356,8 @@ local int construct(struct huffman *h, short *length, int n)
    for (len = 1; len <= MAXBITS; len++) {
        left <<= 1;                     /* one more bit, double codes left */
        left -= h->count[len];          /* deduct count from possible codes */
-        if (left < 0) return left;      /* over-subscribed--return negative */
+        if (left < 0)
+            return left;                /* over-subscribed--return negative */
    }                                   /* left > 0 means incomplete */

    /* generate offsets into symbol table for each length for sorting */
@@ -418,8 +433,8 @@ local int construct(struct huffman *h, short *length, int n)
 *   defined to do the wrong thing in this case.
 */
 local int codes(struct state *s,
-                struct huffman *lencode,
-                struct huffman *distcode)
+                const struct huffman *lencode,
+                const struct huffman *distcode)
 {
    int symbol;         /* decoded symbol */
    int len;            /* length for copy */
@@ -442,11 +457,13 @@ local int codes(struct state *s,
    /* decode literals and length/distance pairs */
    do {
        symbol = decode(s, lencode);
-        if (symbol < 0) return symbol;  /* invalid symbol */
+        if (symbol < 0)
+            return symbol;              /* invalid symbol */
        if (symbol < 256) {             /* literal: symbol is the byte */
            /* write out the literal */
            if (s->out != NIL) {
-                if (s->outcnt == s->outlen) return 1;
+                if (s->outcnt == s->outlen)
+                    return 1;
                s->out[s->outcnt] = symbol;
            }
            s->outcnt++;
@@ -454,12 +471,14 @@ local int codes(struct state *s,
        else if (symbol > 256) {        /* length */
            /* get and compute length */
            symbol -= 257;
-            if (symbol >= 29) return -10;       /* invalid fixed code */
+            if (symbol >= 29)
+                return -10;             /* invalid fixed code */
            len = lens[symbol] + bits(s, lext[symbol]);

            /* get and check distance */
            symbol = decode(s, distcode);
-            if (symbol < 0) return symbol;      /* invalid symbol */
+            if (symbol < 0)
+                return symbol;          /* invalid symbol */
            dist = dists[symbol] + bits(s, dext[symbol]);
 #ifndef INFLATE_ALLOW_INVALID_DISTANCE_TOOFAR_ARRR
            if (dist > s->outcnt)
@@ -468,13 +487,15 @@ local int codes(struct state *s,

            /* copy length bytes from distance bytes back */
            if (s->out != NIL) {
-                if (s->outcnt + len > s->outlen) return 1;
+                if (s->outcnt + len > s->outlen)
+                    return 1;
                while (len--) {
                    s->out[s->outcnt] =
 #ifdef INFLATE_ALLOW_INVALID_DISTANCE_TOOFAR_ARRR
-                        dist > s->outcnt ? 0 :
+                        dist > s->outcnt ?
+                            0 :
 #endif
-                        s->out[s->outcnt - dist];
+                            s->out[s->outcnt - dist];
                    s->outcnt++;
                }
            }
@@ -516,14 +537,19 @@ local int fixed(struct state *s)
    static int virgin = 1;
    static short lencnt[MAXBITS+1], lensym[FIXLCODES];
    static short distcnt[MAXBITS+1], distsym[MAXDCODES];
-    static struct huffman lencode = {lencnt, lensym};
-    static struct huffman distcode = {distcnt, distsym};
+    static struct huffman lencode, distcode;

    /* build fixed huffman tables if first call (may not be thread safe) */
    if (virgin) {
        int symbol;
        short lengths[FIXLCODES];

+        /* construct lencode and distcode */
+        lencode.count = lencnt;
+        lencode.symbol = lensym;
+        distcode.count = distcnt;
+        distcode.symbol = distsym;
+
        /* literal/length table */
        for (symbol = 0; symbol < 144; symbol++)
            lengths[symbol] = 8;
@@ -643,11 +669,16 @@ local int dynamic(struct state *s)
    short lengths[MAXCODES];            /* descriptor code lengths */
    short lencnt[MAXBITS+1], lensym[MAXLCODES];         /* lencode memory */
    short distcnt[MAXBITS+1], distsym[MAXDCODES];       /* distcode memory */
-    struct huffman lencode = {lencnt, lensym};          /* length code */
-    struct huffman distcode = {distcnt, distsym};       /* distance code */
+    struct huffman lencode, distcode;   /* length and distance codes */
    static const short order[19] =      /* permutation of code length codes */
        {16, 17, 18, 0, 8, 7, 9, 6, 10, 5, 11, 4, 12, 3, 13, 2, 14, 1, 15};

+    /* construct lencode and distcode */
+    lencode.count = lencnt;
+    lencode.symbol = lensym;
+    distcode.count = distcnt;
+    distcode.symbol = distsym;
+
    /* get number of lengths in each table, check lengths */
    nlen = bits(s, 5) + 257;
    ndist = bits(s, 5) + 1;
@@ -663,7 +694,8 @@ local int dynamic(struct state *s)

    /* build huffman table for code lengths codes (use lencode temporarily) */
    err = construct(&lencode, lengths, 19);
-    if (err != 0) return -4;            /* require complete code set here */
+    if (err != 0)               /* require complete code set here */
+        return -4;

    /* read length/literal and distance code length tables */
    index = 0;
@@ -677,7 +709,8 @@ local int dynamic(struct state *s)
        else {                          /* repeat instruction */
            len = 0;                    /* assume repeating zeros */
            if (symbol == 16) {         /* repeat last length 3..6 times */
-                if (index == 0) return -5;      /* no last length! */
+                if (index == 0)
+                    return -5;          /* no last length! */
                len = lengths[index - 1];       /* last length */
                symbol = 3 + bits(s, 2);
            }
@@ -698,13 +731,13 @@ local int dynamic(struct state *s)

    /* build huffman table for literal/length codes */
    err = construct(&lencode, lengths, nlen);
-    if (err < 0 || (err > 0 && nlen - lencode.count[0] != 1))
-        return -7;      /* only allow incomplete codes if just one code */
+    if (err && (err < 0 || nlen != lencode.count[0] + lencode.count[1]))
+        return -7;      /* incomplete code ok only for single length 1 code */

    /* build huffman table for distance codes */
    err = construct(&distcode, lengths + nlen, ndist);
-    if (err < 0 || (err > 0 && ndist - distcode.count[0] != 1))
-        return -8;      /* only allow incomplete codes if just one code */
+    if (err && (err < 0 || ndist != distcode.count[0] + distcode.count[1]))
+        return -8;      /* incomplete code ok only for single length 1 code */

    /* decode data until end-of-block code */
    return codes(s, &lencode, &distcode);
@@ -756,7 +789,7 @@ local int dynamic(struct state *s)
 */
 int puff(unsigned char *dest,           /* pointer to destination pointer */
         unsigned long *destlen,        /* amount of output space */
-         unsigned char *source,         /* pointer to source data pointer */
+         const unsigned char *source,   /* pointer to source data pointer */
         unsigned long *sourcelen)      /* amount of input available */
 {
    struct state s;             /* input/output state */
@@ -783,11 +816,15 @@ int puff(unsigned char *dest,           /* pointer to destination pointer */
        do {
            last = bits(&s, 1);         /* one if last block */
            type = bits(&s, 2);         /* block type 0..3 */
-            err = type == 0 ? stored(&s) :
-                  (type == 1 ? fixed(&s) :
-                   (type == 2 ? dynamic(&s) :
-                    -1));               /* type == 3, invalid */
-            if (err != 0) break;        /* return with error */
+            err = type == 0 ?
+                    stored(&s) :
+                    (type == 1 ?
+                        fixed(&s) :
+                        (type == 2 ?
+                            dynamic(&s) :
+                            -1));       /* type == 3, invalid */
+            if (err != 0)
+                break;                  /* return with error */
        } while (!last);
    }

@@ -798,145 +835,3 @@ int puff(unsigned char *dest,           /* pointer to destination pointer */
    }
    return err;
 }
-
-#ifdef TEST
-/* Examples of how to use puff().
-
-   Usage: puff [-w] [-nnn] file
-          ... | puff [-w] [-nnn]
-
-   where file is the input file with deflate data, nnn is the number of bytes
-   of input to skip before inflating (e.g. to skip a zlib or gzip header), and
-   -w is used to write the decompressed data to stdout */
-
-#include <stdio.h>
-#include <stdlib.h>
-
-/* Return size times approximately the cube root of 2, keeping the result as 1,
-   3, or 5 times a power of 2 -- the result is always > size, until the result
-   is the maximum value of an unsigned long, where it remains.  This is useful
-   to keep reallocations less than ~33% over the actual data. */
-local size_t bythirds(size_t size)
-{
-    int n;
-    size_t m;
-
-    m = size;
-    for (n = 0; m; n++)
-        m >>= 1;
-    if (n < 3)
-        return size + 1;
-    n -= 3;
-    m = size >> n;
-    m += m == 6 ? 2 : 1;
-    m <<= n;
-    return m > size ? m : (size_t)(-1);
-}
-
-/* Read the input file *name, or stdin if name is NULL, into allocated memory.
-   Reallocate to larger buffers until the entire file is read in.  Return a
-   pointer to the allocated data, or NULL if there was a memory allocation
-   failure.  *len is the number of bytes of data read from the input file (even
-   if load() returns NULL).  If the input file was empty or could not be opened
-   or read, *len is zero. */
-local void *load(char *name, size_t *len)
-{
-    size_t size;
-    void *buf, *swap;
-    FILE *in;
-
-    *len = 0;
-    buf = malloc(size = 4096);
-    if (buf == NULL)
-        return NULL;
-    in = name == NULL ? stdin : fopen(name, "rb");
-    if (in != NULL) {
-        for (;;) {
-            *len += fread((char *)buf + *len, 1, size - *len, in);
-            if (*len < size) break;
-            size = bythirds(size);
-            if (size == *len || (swap = realloc(buf, size)) == NULL) {
-                free(buf);
-                buf = NULL;
-                break;
-            }
-            buf = swap;
-        }
-        fclose(in);
-    }
-    return buf;
-}
-
-int main(int argc, char **argv)
-{
-    int ret, skip = 0, put = 0;
-    char *arg, *name = NULL;
-    unsigned char *source = NULL, *dest;
-    size_t len = 0;
-    unsigned long sourcelen, destlen;
-
-    /* process arguments */
-    while (arg = *++argv, --argc)
-        if (arg[0] == '-') {
-            if (arg[1] == 'w' && arg[2] == 0)
-                put = 1;
-            else if (arg[1] >= '0' && arg[1] <= '9')
-                skip = atoi(arg + 1);
-            else {
-                fprintf(stderr, "invalid option %s\n", arg);
-                return 3;
-            }
-        }
-        else if (name != NULL) {
-            fprintf(stderr, "only one file name allowed\n");
-            return 3;
-        }
-        else
-            name = arg;
-    source = load(name, &len);
-    if (source == NULL) {
-        fprintf(stderr, "memory allocation failure\n");
-        return 4;
-    }
-    if (len == 0) {
-        fprintf(stderr, "could not read %s, or it was empty\n",
-                name == NULL ? "<stdin>" : name);
-        free(source);
-        return 3;
-    }
-    if (skip >= len) {
-        fprintf(stderr, "skip request of %d leaves no input\n", skip);
-        free(source);
-        return 3;
-    }
-
-    /* test inflate data with offset skip */
-    len -= skip;
-    sourcelen = (unsigned long)len;
-    ret = puff(NIL, &destlen, source + skip, &sourcelen);
-    if (ret)
-        fprintf(stderr, "puff() failed with return code %d\n", ret);
-    else {
-        fprintf(stderr, "puff() succeeded uncompressing %lu bytes\n", destlen);
-        if (sourcelen < len) fprintf(stderr, "%lu compressed bytes unused\n",
-                                     len - sourcelen);
-    }
-
-    /* if requested, inflate again and write decompressd data to stdout */
-    if (put) {
-        dest = malloc(destlen);
-        if (dest == NULL) {
-            fprintf(stderr, "memory allocation failure\n");
-            free(source);
-            return 4;
-        }
-        puff(dest, &destlen, source + skip, &sourcelen);
-        fwrite(dest, 1, destlen, stdout);
-        free(dest);
-    }
-
-    /* clean up */
-    free(source);
-    return ret;
-}
-#endif
--- a/contrib/puff/puff.h
+++ b/contrib/puff/puff.h
@@ -1,6 +1,6 @@
 /* puff.h
-  Copyright (C) 2002-2008 Mark Adler, all rights reserved
-  version 1.9, 10 Jan 2008
+  Copyright (C) 2002-2010 Mark Adler, all rights reserved
+  version 2.2, 25 Apr 2010

  This software is provided 'as-is', without any express or implied
  warranty.  In no event will the author be held liable for any damages
@@ -25,7 +25,11 @@
 /*
 * See puff.c for purpose and usage.
 */
+#ifndef NIL
+#  define NIL ((unsigned char *)0)      /* for no output option */
+#endif
+
 int puff(unsigned char *dest,           /* pointer to destination pointer */
         unsigned long *destlen,        /* amount of output space */
-         unsigned char *source,         /* pointer to source data pointer */
+         const unsigned char *source,   /* pointer to source data pointer */
         unsigned long *sourcelen);     /* amount of input available */
--- a/contrib/puff/pufftest.c
+++ b/contrib/puff/pufftest.c
@@ -0,0 +1,165 @@
+/*
+ * pufftest.c
+ * Copyright (C) 2002-2010 Mark Adler
+ * For conditions of distribution and use, see copyright notice in puff.h
+ * version 2.2, 25 Apr 2010
+ */
+
+/* Example of how to use puff().
+
+   Usage: puff [-w] [-f] [-nnn] file
+          ... | puff [-w] [-f] [-nnn]
+
+   where file is the input file with deflate data, nnn is the number of bytes
+   of input to skip before inflating (e.g. to skip a zlib or gzip header), and
+   -w is used to write the decompressed data to stdout.  -f is for coverage
+   testing, and causes pufftest to fail with not enough output space (-f does
+   a write like -w, so -w is not required). */
+
+#include <stdio.h>
+#include <stdlib.h>
+#include "puff.h"
+
+#if defined(MSDOS) || defined(OS2) || defined(WIN32) || defined(__CYGWIN__)
+#  include <fcntl.h>
+#  include <io.h>
+#  define SET_BINARY_MODE(file) setmode(fileno(file), O_BINARY)
+#else
+#  define SET_BINARY_MODE(file)
+#endif
+
+#define local static
+
+/* Return size times approximately the cube root of 2, keeping the result as 1,
+   3, or 5 times a power of 2 -- the result is always > size, until the result
+   is the maximum value of an unsigned long, where it remains.  This is useful
+   to keep reallocations less than ~33% over the actual data. */
+local size_t bythirds(size_t size)
+{
+    int n;
+    size_t m;
+
+    m = size;
+    for (n = 0; m; n++)
+        m >>= 1;
+    if (n < 3)
+        return size + 1;
+    n -= 3;
+    m = size >> n;
+    m += m == 6 ? 2 : 1;
+    m <<= n;
+    return m > size ? m : (size_t)(-1);
+}
+
+/* Read the input file *name, or stdin if name is NULL, into allocated memory.
+   Reallocate to larger buffers until the entire file is read in.  Return a
+   pointer to the allocated data, or NULL if there was a memory allocation
+   failure.  *len is the number of bytes of data read from the input file (even
+   if load() returns NULL).  If the input file was empty or could not be opened
+   or read, *len is zero. */
+local void *load(const char *name, size_t *len)
+{
+    size_t size;
+    void *buf, *swap;
+    FILE *in;
+
+    *len = 0;
+    buf = malloc(size = 4096);
+    if (buf == NULL)
+        return NULL;
+    in = name == NULL ? stdin : fopen(name, "rb");
+    if (in != NULL) {
+        for (;;) {
+            *len += fread((char *)buf + *len, 1, size - *len, in);
+            if (*len < size) break;
+            size = bythirds(size);
+            if (size == *len || (swap = realloc(buf, size)) == NULL) {
+                free(buf);
+                buf = NULL;
+                break;
+            }
+            buf = swap;
+        }
+        fclose(in);
+    }
+    return buf;
+}
+
+int main(int argc, char **argv)
+{
+    int ret, put = 0, fail = 0;
+    unsigned skip = 0;
+    char *arg, *name = NULL;
+    unsigned char *source = NULL, *dest;
+    size_t len = 0;
+    unsigned long sourcelen, destlen;
+
+    /* process arguments */
+    while (arg = *++argv, --argc)
+        if (arg[0] == '-') {
+            if (arg[1] == 'w' && arg[2] == 0)
+                put = 1;
+            else if (arg[1] == 'f' && arg[2] == 0)
+                fail = 1, put = 1;
+            else if (arg[1] >= '0' && arg[1] <= '9')
+                skip = (unsigned)atoi(arg + 1);
+            else {
+                fprintf(stderr, "invalid option %s\n", arg);
+                return 3;
+            }
+        }
+        else if (name != NULL) {
+            fprintf(stderr, "only one file name allowed\n");
+            return 3;
+        }
+        else
+            name = arg;
+    source = load(name, &len);
+    if (source == NULL) {
+        fprintf(stderr, "memory allocation failure\n");
+        return 4;
+    }
+    if (len == 0) {
+        fprintf(stderr, "could not read %s, or it was empty\n",
+                name == NULL ? "<stdin>" : name);
+        free(source);
+        return 3;
+    }
+    if (skip >= len) {
+        fprintf(stderr, "skip request of %d leaves no input\n", skip);
+        free(source);
+        return 3;
+    }
+
+    /* test inflate data with offset skip */
+    len -= skip;
+    sourcelen = (unsigned long)len;
+    ret = puff(NIL, &destlen, source + skip, &sourcelen);
+    if (ret)
+        fprintf(stderr, "puff() failed with return code %d\n", ret);
+    else {
+        fprintf(stderr, "puff() succeeded uncompressing %lu bytes\n", destlen);
+        if (sourcelen < len) fprintf(stderr, "%lu compressed bytes unused\n",
+                                     len - sourcelen);
+    }
+
+    /* if requested, inflate again and write decompressd data to stdout */
+    if (put && ret == 0) {
+        if (fail)
+            destlen >>= 1;
+        dest = malloc(destlen);
+        if (dest == NULL) {
+            fprintf(stderr, "memory allocation failure\n");
+            free(source);
+            return 4;
+        }
+        puff(dest, &destlen, source + skip, &sourcelen);
+        SET_BINARY_MODE(stdout);
+        fwrite(dest, 1, destlen, stdout);
+        free(dest);
+    }
+
+    /* clean up */
+    free(source);
+    return ret;
+}
--- a/contrib/puff/zeros.raw
+++ b/contrib/puff/zeros.raw
--- a/contrib/vstudio/vc10/zlib.rc
+++ b/contrib/vstudio/vc10/zlib.rc
@@ -2,8 +2,8 @@

 #define IDR_VERSION1  1
 IDR_VERSION1	VERSIONINFO	MOVEABLE IMPURE LOADONCALL DISCARDABLE
-  FILEVERSION	 1,2,4,1
-  PRODUCTVERSION 1,2,4,1
+  FILEVERSION	 1.2.5.1,1
+  PRODUCTVERSION 1.2.5.1,1
  FILEFLAGSMASK	VS_FFI_FILEFLAGSMASK
  FILEFLAGS	0
  FILEOS	VOS_DOS_WINDOWS32
@@ -17,7 +17,7 @@ BEGIN

    BEGIN
      VALUE "FileDescription", "zlib data compression and ZIP file I/O library\0"
-      VALUE "FileVersion",	"1.2.4.1\0"
+      VALUE "FileVersion",	"1.2.5.1\0"
      VALUE "InternalName",	"zlib\0"
      VALUE "OriginalFilename",	"zlib.dll\0"
      VALUE "ProductName",	"ZLib.DLL\0"
--- a/contrib/vstudio/vc10/zlibvc.def
+++ b/contrib/vstudio/vc10/zlibvc.def
@@ -55,6 +55,7 @@ EXPORTS
        gzungetc                                 @49
        zlibCompileFlags                         @50
        deflatePrime                             @51
+        deflatePending                           @52

        unzOpen                                  @61
        unzClose                                 @62
--- a/contrib/vstudio/vc9/zlib.rc
+++ b/contrib/vstudio/vc9/zlib.rc
@@ -2,8 +2,8 @@

 #define IDR_VERSION1  1
 IDR_VERSION1	VERSIONINFO	MOVEABLE IMPURE LOADONCALL DISCARDABLE
-  FILEVERSION	 1,2,4,1
-  PRODUCTVERSION 1,2,4,1
+  FILEVERSION	 1.2.5.1,1
+  PRODUCTVERSION 1.2.5.1,1
  FILEFLAGSMASK	VS_FFI_FILEFLAGSMASK
  FILEFLAGS	0
  FILEOS	VOS_DOS_WINDOWS32
@@ -17,7 +17,7 @@ BEGIN

    BEGIN
      VALUE "FileDescription", "zlib data compression and ZIP file I/O library\0"
-      VALUE "FileVersion",	"1.2.4.1\0"
+      VALUE "FileVersion",	"1.2.5.1\0"
      VALUE "InternalName",	"zlib\0"
      VALUE "OriginalFilename",	"zlib.dll\0"
      VALUE "ProductName",	"ZLib.DLL\0"
--- a/contrib/vstudio/vc9/zlibvc.def
+++ b/contrib/vstudio/vc9/zlibvc.def
@@ -55,6 +55,7 @@ EXPORTS
        gzungetc                                 @49
        zlibCompileFlags                         @50
        deflatePrime                             @51
+        deflatePending                           @52

        unzOpen                                  @61
        unzClose                                 @62
--- a/crc32.c
+++ b/crc32.c
@@ -1,5 +1,5 @@
 /* crc32.c -- compute the CRC-32 of a data stream
- * Copyright (C) 1995-2006 Mark Adler
+ * Copyright (C) 1995-2006, 2010, 2011 Mark Adler
 * For conditions of distribution and use, see copyright notice in zlib.h
 *
 * Thanks to Rodney Brown <rbrown64@csc.com.au> for his contribution of faster
@@ -17,6 +17,8 @@
  of the crc tables.  Therefore, if you #define DYNAMIC_CRC_TABLE, you should
  first call get_crc_table() to initialize the tables before allowing more than
  one thread to use crc32().
+
+  DYNAMIC_CRC_TABLE and MAKECRCH can be #defined to write out crc32.h.
 */

 #ifdef MAKECRCH
@@ -53,6 +55,7 @@

 /* Definitions for doing the crc four data bytes at a time. */
 #ifdef BYFOUR
+   typedef u4 crc_table_t;
 #  define REV(w) ((((w)>>24)&0xff)+(((w)>>8)&0xff00)+ \
                (((w)&0xff00)<<8)+(((w)&0xff)<<24))
   local unsigned long crc32_little OF((unsigned long,
@@ -61,6 +64,7 @@
                        const unsigned char FAR *, unsigned));
 #  define TBLS 8
 #else
+   typedef unsigned long crc_table_t;
 #  define TBLS 1
 #endif /* BYFOUR */

@@ -68,16 +72,16 @@
 local unsigned long gf2_matrix_times OF((unsigned long *mat,
                                         unsigned long vec));
 local void gf2_matrix_square OF((unsigned long *square, unsigned long *mat));
-local uLong crc32_combine_(uLong crc1, uLong crc2, z_off64_t len2);
+local uLong crc32_combine_ OF((uLong crc1, uLong crc2, z_off64_t len2));


 #ifdef DYNAMIC_CRC_TABLE

 local volatile int crc_table_empty = 1;
-local unsigned long FAR crc_table[TBLS][256];
+local crc_table_t FAR crc_table[TBLS][256];
 local void make_crc_table OF((void));
 #ifdef MAKECRCH
-   local void write_table OF((FILE *, const unsigned long FAR *));
+   local void write_table OF((FILE *, const crc_table_t FAR *));
 #endif /* MAKECRCH */
 /*
  Generate tables for a byte-wise 32-bit CRC calculation on the polynomial:
@@ -107,9 +111,9 @@ local void make_crc_table OF((void));
 */
 local void make_crc_table()
 {
-    unsigned long c;
+    crc_table_t c;
    int n, k;
-    unsigned long poly;                 /* polynomial exclusive-or pattern */
+    crc_table_t poly;                   /* polynomial exclusive-or pattern */
    /* terms of polynomial defining this crc (except x^32): */
    static volatile int first = 1;      /* flag to limit concurrent making */
    static const unsigned char p[] = {0,1,2,4,5,7,8,10,11,12,16,22,23,26};
@@ -121,13 +125,13 @@ local void make_crc_table()
        first = 0;

        /* make exclusive-or pattern from polynomial (0xedb88320UL) */
-        poly = 0UL;
-        for (n = 0; n < sizeof(p)/sizeof(unsigned char); n++)
-            poly |= 1UL << (31 - p[n]);
+        poly = 0;
+        for (n = 0; n < (int)(sizeof(p)/sizeof(unsigned char)); n++)
+            poly |= (crc_table_t)1 << (31 - p[n]);

        /* generate a crc for every 8-bit value */
        for (n = 0; n < 256; n++) {
-            c = (unsigned long)n;
+            c = (crc_table_t)n;
            for (k = 0; k < 8; k++)
                c = c & 1 ? poly ^ (c >> 1) : c >> 1;
            crc_table[0][n] = c;
@@ -164,7 +168,7 @@ local void make_crc_table()
        if (out == NULL) return;
        fprintf(out, "/* crc32.h -- tables for rapid CRC calculation\n");
        fprintf(out, " * Generated automatically by crc32.c\n */\n\n");
-        fprintf(out, "local const unsigned long FAR ");
+        fprintf(out, "local const crc_table_t FAR ");
        fprintf(out, "crc_table[TBLS][256] =\n{\n  {\n");
        write_table(out, crc_table[0]);
 #  ifdef BYFOUR
@@ -184,12 +188,13 @@ local void make_crc_table()
 #ifdef MAKECRCH
 local void write_table(out, table)
    FILE *out;
-    const unsigned long FAR *table;
+    const crc_table_t FAR *table;
 {
    int n;

    for (n = 0; n < 256; n++)
-        fprintf(out, "%s0x%08lxUL%s", n % 5 ? "" : "    ", table[n],
+        fprintf(out, "%s0x%08lxUL%s", n % 5 ? "" : "    ",
+                (unsigned long)(table[n]),
                n == 255 ? "\n" : (n % 5 == 4 ? ",\n" : ", "));
 }
 #endif /* MAKECRCH */
--- a/crc32.h
+++ b/crc32.h
@@ -2,7 +2,7 @@
 * Generated automatically by crc32.c
 */

-local const unsigned long FAR crc_table[TBLS][256] =
+local const crc_table_t FAR crc_table[TBLS][256] =
 {
  {
    0x00000000UL, 0x77073096UL, 0xee0e612cUL, 0x990951baUL, 0x076dc419UL,
--- a/deflate.c
+++ b/deflate.c
@@ -1,5 +1,5 @@
 /* deflate.c -- compress data using the deflation algorithm
- * Copyright (C) 1995-2010 Jean-loup Gailly and Mark Adler
+ * Copyright (C) 1995-2011 Jean-loup Gailly and Mark Adler
 * For conditions of distribution and use, see copyright notice in zlib.h
 */

@@ -37,7 +37,7 @@
 *  REFERENCES
 *
 *      Deutsch, L.P.,"DEFLATE Compressed Data Format Specification".
- *      Available in http://www.ietf.org/rfc/rfc1951.txt
+ *      Available in http://tools.ietf.org/html/rfc1951
 *
 *      A description of the Rabin and Karp algorithm is given in the book
 *         "Algorithms" by R. Sedgewick, Addison-Wesley, p252.
@@ -52,7 +52,7 @@
 #include "deflate.h"

 const char deflate_copyright[] =
-   " deflate 1.2.4.1 Copyright 1995-2010 Jean-loup Gailly and Mark Adler ";
+   " deflate 1.2.5.1 Copyright 1995-2010 Jean-loup Gailly and Mark Adler ";
 /*
  If you use the zlib library in a product, an acknowledgment is welcome
  in the documentation of your product. If for some reason you cannot
@@ -396,6 +396,18 @@ int ZEXPORT deflateSetHeader (strm, head)
    return Z_OK;
 }

+/* ========================================================================= */
+int ZEXPORT deflatePending (strm, pending, bits)
+    unsigned *pending;
+    int *bits;
+    z_streamp strm;
+{
+    if (strm == Z_NULL || strm->state == Z_NULL) return Z_STREAM_ERROR;
+    *pending = strm->state->pending;
+    *bits = strm->state->bi_valid;
+    return Z_OK;
+}
+
 /* ========================================================================= */
 int ZEXPORT deflatePrime (strm, bits, value)
    z_streamp strm;
@@ -1001,15 +1013,15 @@ local int read_buf(strm, buf, size)

    strm->avail_in  -= len;

+    zmemcpy(buf, strm->next_in, len);
    if (strm->state->wrap == 1) {
-        strm->adler = adler32(strm->adler, strm->next_in, len);
+        strm->adler = adler32(strm->adler, buf, len);
    }
 #ifdef GZIP
    else if (strm->state->wrap == 2) {
-        strm->adler = crc32(strm->adler, strm->next_in, len);
+        strm->adler = crc32(strm->adler, buf, len);
    }
 #endif
-    zmemcpy(buf, strm->next_in, len);
    strm->next_in  += len;
    strm->total_in += len;

--- a/deflate.h
+++ b/deflate.h
@@ -1,5 +1,5 @@
 /* deflate.h -- internal compression state
- * Copyright (C) 1995-2009 Jean-loup Gailly
+ * Copyright (C) 1995-2010 Jean-loup Gailly
 * For conditions of distribution and use, see copyright notice in zlib.h
 */

@@ -188,7 +188,7 @@ typedef struct internal_state {
    int nice_match; /* Stop searching when current match exceeds this */

                /* used by trees.c: */
-    /* Didn't use ct_data typedef below to supress compiler warning */
+    /* Didn't use ct_data typedef below to suppress compiler warning */
    struct ct_data_s dyn_ltree[HEAP_SIZE];   /* literal and length tree */
    struct ct_data_s dyn_dtree[2*D_CODES+1]; /* distance tree */
    struct ct_data_s bl_tree[2*BL_CODES+1];  /* Huffman tree for bit lengths */
@@ -290,13 +290,13 @@ typedef struct internal_state {
   memory checker errors from longest match routines */

        /* in trees.c */
-void _tr_init         OF((deflate_state *s));
-int  _tr_tally        OF((deflate_state *s, unsigned dist, unsigned lc));
-void _tr_flush_block  OF((deflate_state *s, charf *buf, ulg stored_len,
-                          int last));
-void _tr_align        OF((deflate_state *s));
-void _tr_stored_block OF((deflate_state *s, charf *buf, ulg stored_len,
-                          int last));
+void ZLIB_INTERNAL _tr_init OF((deflate_state *s));
+int ZLIB_INTERNAL _tr_tally OF((deflate_state *s, unsigned dist, unsigned lc));
+void ZLIB_INTERNAL _tr_flush_block OF((deflate_state *s, charf *buf,
+                        ulg stored_len, int last));
+void ZLIB_INTERNAL _tr_align OF((deflate_state *s));
+void ZLIB_INTERNAL _tr_stored_block OF((deflate_state *s, charf *buf,
+                        ulg stored_len, int last));

 #define d_code(dist) \
   ((dist) < 256 ? _dist_code[dist] : _dist_code[256+((dist)>>7)])
@@ -309,11 +309,11 @@ void _tr_stored_block OF((deflate_state *s, charf *buf, ulg stored_len,
 /* Inline versions of _tr_tally for speed: */

 #if defined(GEN_TREES_H) || !defined(STDC)
-  extern uch _length_code[];
-  extern uch _dist_code[];
+  extern uch ZLIB_INTERNAL _length_code[];
+  extern uch ZLIB_INTERNAL _dist_code[];
 #else
-  extern const uch _length_code[];
-  extern const uch _dist_code[];
+  extern const uch ZLIB_INTERNAL _length_code[];
+  extern const uch ZLIB_INTERNAL _dist_code[];
 #endif

 # define _tr_tally_lit(s, c, flush) \
--- a/doc/algorithm.txt
+++ b/doc/algorithm.txt
@@ -206,4 +206,4 @@ Compression,'' IEEE Transactions on Information Theory, Vol. 23, No. 3,
 pp. 337-343.

 ``DEFLATE Compressed Data Format Specification'' available in
-http://www.ietf.org/rfc/rfc1951.txt
+http://tools.ietf.org/html/rfc1951
--- a/example.c
+++ b/example.c
@@ -1,5 +1,5 @@
 /* example.c -- usage example of the zlib compression library
- * Copyright (C) 1995-2006 Jean-loup Gailly.
+ * Copyright (C) 1995-2006, 2011 Jean-loup Gailly.
 * For conditions of distribution and use, see copyright notice in zlib.h
 */

@@ -438,7 +438,7 @@ void test_dict_deflate(compr, comprLen)
    CHECK_ERR(err, "deflateInit");

    err = deflateSetDictionary(&c_stream,
-                               (const Bytef*)dictionary, sizeof(dictionary));
+                (const Bytef*)dictionary, (int)sizeof(dictionary));
    CHECK_ERR(err, "deflateSetDictionary");

    dictId = c_stream.adler;
@@ -491,7 +491,7 @@ void test_dict_inflate(compr, comprLen, uncompr, uncomprLen)
                exit(1);
            }
            err = inflateSetDictionary(&d_stream, (const Bytef*)dictionary,
-                                       sizeof(dictionary));
+                                       (int)sizeof(dictionary));
        }
        CHECK_ERR(err, "inflate with dict");
    }
--- a/gzguts.h
+++ b/gzguts.h
@@ -3,7 +3,7 @@
 * For conditions of distribution and use, see copyright notice in zlib.h
 */

-#if _LARGEFILE64_SOURCE == 1
+#ifdef _LARGEFILE64_SOURCE
 #  ifndef _LARGEFILE_SOURCE
 #    define _LARGEFILE_SOURCE 1
 #  endif
@@ -12,7 +12,11 @@
 #  endif
 #endif

-#define ZLIB_INTERNAL
+#if ((__GNUC__-0) * 10 + __GNUC_MINOR__-0 >= 33) && !defined(NO_VIZ)
+#  define ZLIB_INTERNAL __attribute__((visibility ("hidden")))
+#else
+#  define ZLIB_INTERNAL
+#endif

 #include <stdio.h>
 #include "zlib.h"
@@ -56,10 +60,12 @@
 #  endif
 #endif

-#if _LARGEFILE64_SOURCE == 1
-#  define z_off64_t off64_t
-#else
-#  define z_off64_t z_off_t
+/* provide prototypes for these when building zlib without LFS */
+#if !defined(_LARGEFILE64_SOURCE) || _LFS64_LARGEFILE-0 == 0
+    ZEXTERN gzFile ZEXPORT gzopen64 OF((const char *, const char *));
+    ZEXTERN z_off64_t ZEXPORT gzseek64 OF((gzFile, z_off64_t, int));
+    ZEXTERN z_off64_t ZEXPORT gztell64 OF((gzFile));
+    ZEXTERN z_off64_t ZEXPORT gzoffset64 OF((gzFile));
 #endif

 /* default i/o buffer size -- double this for output when reading */
@@ -110,9 +116,9 @@ typedef struct {
 typedef gz_state FAR *gz_statep;

 /* shared functions */
-ZEXTERN void ZEXPORT gz_error OF((gz_statep, int, const char *));
+void ZLIB_INTERNAL gz_error OF((gz_statep, int, const char *));
 #if defined UNDER_CE
-ZEXTERN char ZEXPORT *gz_strwinerror OF((DWORD error));
+char ZLIB_INTERNAL *gz_strwinerror OF((DWORD error));
 #endif

 /* GT_OFF(x), where x is an unsigned value, is true if x > maximum z_off64_t
@@ -121,6 +127,6 @@ ZEXTERN char ZEXPORT *gz_strwinerror OF((DWORD error));
 #ifdef INT_MAX
 #  define GT_OFF(x) (sizeof(int) == sizeof(z_off64_t) && (x) > INT_MAX)
 #else
-ZEXTERN unsigned ZEXPORT gz_intmax OF((void));
+unsigned ZLIB_INTERNAL gz_intmax OF((void));
 #  define GT_OFF(x) (sizeof(int) == sizeof(z_off64_t) && (x) > gz_intmax())
 #endif
--- a/gzlib.c
+++ b/gzlib.c
@@ -5,7 +5,7 @@

 #include "gzguts.h"

-#if _LARGEFILE64_SOURCE == 1 && _LFS64_LARGEFILE == 1
+#if defined(_LARGEFILE64_SOURCE) && _LFS64_LARGEFILE-0
 #  define LSEEK lseek64
 #else
 #  define LSEEK lseek
@@ -26,7 +26,7 @@ local gzFile gz_open OF((const char *, int, const char *));

   The gz_strwinerror function does not change the current setting of
   GetLastError. */
-char ZEXPORT *gz_strwinerror (error)
+char ZLIB_INTERNAL *gz_strwinerror (error)
     DWORD error;
 {
    static char buf[1024];
@@ -91,6 +91,10 @@ local gzFile gz_open(path, fd, mode)
 {
    gz_statep state;

+    /* check input */
+    if (path == NULL)
+        return NULL;
+
    /* allocate gzFile structure to return */
    state = malloc(sizeof(gz_state));
    if (state == NULL)
@@ -172,6 +176,7 @@ local gzFile gz_open(path, fd, mode)
                        O_APPEND))),
            0666);
    if (state->fd == -1) {
+        free(state->path);
        free(state);
        return NULL;
    }
@@ -432,7 +437,8 @@ int ZEXPORT gzeof(file)
        return 0;

    /* return end-of-file state */
-    return state->mode == GZ_READ ? (state->eof && state->have == 0) : 0;
+    return state->mode == GZ_READ ?
+        (state->eof && state->strm.avail_in == 0 && state->have == 0) : 0;
 }

 /* -- see zlib.h -- */
@@ -480,7 +486,7 @@ void ZEXPORT gzclearerr(file)
   memory).  Simply save the error message as a static string.  If there is an
   allocation failure constructing the error message, then convert the error to
   out of memory. */
-void ZEXPORT gz_error(state, err, msg)
+void ZLIB_INTERNAL gz_error(state, err, msg)
    gz_statep state;
    int err;
    const char *msg;
@@ -520,7 +526,7 @@ void ZEXPORT gz_error(state, err, msg)
   available) -- we need to do this to cover cases where 2's complement not
   used, since C standard permits 1's complement and sign-bit representations,
   otherwise we could just use ((unsigned)-1) >> 1 */
-unsigned ZEXPORT gz_intmax()
+unsigned ZLIB_INTERNAL gz_intmax()
 {
    unsigned p, q;

--- a/gzwrite.c
+++ b/gzwrite.c
@@ -1,5 +1,5 @@
 /* gzwrite.c -- zlib functions for writing gzip files
- * Copyright (C) 2004, 2005, 2010 Mark Adler
+ * Copyright (C) 2004, 2005, 2010, 2011 Mark Adler
 * For conditions of distribution and use, see copyright notice in zlib.h
 */

@@ -274,7 +274,7 @@ int ZEXPORT gzputs(file, str)
    return ret == 0 && len != 0 ? -1 : ret;
 }

-#ifdef STDC
+#if defined(STDC) || defined(Z_HAVE_STDARG_H)
 #include <stdarg.h>

 /* -- see zlib.h -- */
@@ -346,7 +346,7 @@ int ZEXPORTVA gzprintf (gzFile file, const char *format, ...)
    return len;
 }

-#else /* !STDC */
+#else /* !STDC && !Z_HAVE_STDARG_H */

 /* -- see zlib.h -- */
 int ZEXPORTVA gzprintf (file, format, a1, a2, a3, a4, a5, a6, a7, a8, a9, a10,
@@ -366,6 +366,10 @@ int ZEXPORTVA gzprintf (file, format, a1, a2, a3, a4, a5, a6, a7, a8, a9, a10,
    state = (gz_statep)file;
    strm = &(state->strm);

+    /* check that can really pass pointer in ints */
+    if (sizeof(int) != sizeof(void *))
+        return 0;
+
    /* check that we're writing and that there's no error */
    if (state->mode != GZ_WRITE || state->err != Z_OK)
        return 0;
--- a/inffast.c
+++ b/inffast.c
@@ -1,5 +1,5 @@
 /* inffast.c -- fast decoding
- * Copyright (C) 1995-2008 Mark Adler
+ * Copyright (C) 1995-2008, 2010 Mark Adler
 * For conditions of distribution and use, see copyright notice in zlib.h
 */

@@ -64,7 +64,7 @@
      requires strm->avail_out >= 258 for each loop to avoid checking for
      output space.
 */
-void inflate_fast(strm, start)
+void ZLIB_INTERNAL inflate_fast(strm, start)
 z_streamp strm;
 unsigned start;         /* inflate()'s starting value for strm->avail_out */
 {
--- a/inffast.h
+++ b/inffast.h
@@ -1,5 +1,5 @@
 /* inffast.h -- header to use inffast.c
- * Copyright (C) 1995-2003 Mark Adler
+ * Copyright (C) 1995-2003, 2010 Mark Adler
 * For conditions of distribution and use, see copyright notice in zlib.h
 */

@@ -8,4 +8,4 @@
   subject to change. Applications should only use zlib.h.
 */

-void inflate_fast OF((z_streamp strm, unsigned start));
+void ZLIB_INTERNAL inflate_fast OF((z_streamp strm, unsigned start));
--- a/inftrees.c
+++ b/inftrees.c
@@ -9,7 +9,7 @@
 #define MAXBITS 15

 const char inflate_copyright[] =
-   " inflate 1.2.4.1 Copyright 1995-2010 Mark Adler ";
+   " inflate 1.2.5.1 Copyright 1995-2010 Mark Adler ";
 /*
  If you use the zlib library in a product, an acknowledgment is welcome
  in the documentation of your product. If for some reason you cannot
@@ -29,7 +29,7 @@ const char inflate_copyright[] =
   table index bits.  It will differ if the request is greater than the
   longest code or if it is less than the shortest code.
 */
-int inflate_table(type, lens, codes, table, bits, work)
+int ZLIB_INTERNAL inflate_table(type, lens, codes, table, bits, work)
 codetype type;
 unsigned short FAR *lens;
 unsigned codes;
@@ -62,7 +62,7 @@ unsigned short FAR *work;
        35, 43, 51, 59, 67, 83, 99, 115, 131, 163, 195, 227, 258, 0, 0};
    static const unsigned short lext[31] = { /* Length codes 257..285 extra */
        16, 16, 16, 16, 16, 16, 16, 16, 17, 17, 17, 17, 18, 18, 18, 18,
-        19, 19, 19, 19, 20, 20, 20, 20, 21, 21, 21, 21, 16, 67, 206};
+        19, 19, 19, 19, 20, 20, 20, 20, 21, 21, 21, 21, 16, 205, 203};
    static const unsigned short dbase[32] = { /* Distance codes 0..29 base */
        1, 2, 3, 4, 5, 7, 9, 13, 17, 25, 33, 49, 65, 97, 129, 193,
        257, 385, 513, 769, 1025, 1537, 2049, 3073, 4097, 6145,
--- a/inftrees.h
+++ b/inftrees.h
@@ -1,5 +1,5 @@
 /* inftrees.h -- header to use inftrees.c
- * Copyright (C) 1995-2005 Mark Adler
+ * Copyright (C) 1995-2005, 2010 Mark Adler
 * For conditions of distribution and use, see copyright notice in zlib.h
 */

@@ -57,6 +57,6 @@ typedef enum {
    DISTS
 } codetype;

-extern int inflate_table OF((codetype type, unsigned short FAR *lens,
+int ZLIB_INTERNAL inflate_table OF((codetype type, unsigned short FAR *lens,
                             unsigned codes, code FAR * FAR *table,
                             unsigned FAR *bits, unsigned short FAR *work));
--- a/minigzip.c
+++ b/minigzip.c
@@ -32,6 +32,9 @@
 #if defined(MSDOS) || defined(OS2) || defined(WIN32) || defined(__CYGWIN__)
 #  include <fcntl.h>
 #  include <io.h>
+#  ifdef UNDER_CE
+#    include <stdlib.h>
+#  endif
 #  define SET_BINARY_MODE(file) setmode(fileno(file), O_BINARY)
 #else
 #  define SET_BINARY_MODE(file)
@@ -50,9 +53,11 @@
 #  include <unix.h> /* for fileno */
 #endif

+#if !defined(Z_HAVE_UNISTD_H) && !defined(_LARGEFILE64_SOURCE)
 #ifndef WIN32 /* unlink already in stdio.h for WIN32 */
  extern int unlink OF((const char *));
 #endif
+#endif

 #if defined(UNDER_CE)
 #  include <windows.h>
--- a/old/as400/compile.clp
+++ b/old/as400/compile.clp
@@ -1,123 +0,0 @@
-/******************************************************************************/
-/*                                                                            */
-/*  ZLIB                                                                      */
-/*                                                                            */
-/*    Compile sources into modules and link them into a service program.      */
-/*                                                                            */
-/******************************************************************************/
-
-             PGM
-
-/*      Configuration adjustable parameters.                                  */
-
-             DCL        VAR(&SRCLIB) TYPE(*CHAR) LEN(10) +
-                          VALUE('ZLIB')                         /* Source library. */
-             DCL        VAR(&SRCFILE) TYPE(*CHAR) LEN(10) +
-                          VALUE('SOURCES')                      /* Source member file. */
-             DCL        VAR(&CTLFILE) TYPE(*CHAR) LEN(10) +
-                          VALUE('TOOLS')                        /* Control member file. */
-
-             DCL        VAR(&MODLIB) TYPE(*CHAR) LEN(10) +
-                          VALUE('ZLIB')                         /* Module library. */
-
-             DCL        VAR(&SRVLIB) TYPE(*CHAR) LEN(10) +
-                          VALUE('LGPL')                         /* Service program library. */
-
-             DCL        VAR(&CFLAGS) TYPE(*CHAR) +
-                          VALUE('OPTIMIZE(40)')                 /* Compile options. */
-
-
-/*      Working storage.                                                      */
-
-             DCL        VAR(&CMDLEN) TYPE(*DEC) LEN(15 5) VALUE(300)    /* Command length. */
-             DCL        VAR(&CMD) TYPE(*CHAR) LEN(512)
-
-
-/*      Compile sources into modules.                                         */
-
-             CHGVAR     VAR(&CMD) VALUE('CRTCMOD MODULE(' *TCAT &MODLIB *TCAT  +
-                        '/ADLER32)               SRCFILE(' *TCAT               +
-                        &SRCLIB *TCAT '/' *TCAT &SRCFILE *TCAT                 +
-                        ') SYSIFCOPT(*IFSIO)' *BCAT &CFLAGS)
-             CALL       PGM(QCMDEXC) PARM(&CMD &CMDLEN)
-
-             CHGVAR     VAR(&CMD) VALUE('CRTCMOD MODULE(' *TCAT &MODLIB *TCAT  +
-                        '/COMPRESS)              SRCFILE(' *TCAT               +
-                        &SRCLIB *TCAT '/' *TCAT &SRCFILE *TCAT                 +
-                        ') SYSIFCOPT(*IFSIO)' *BCAT &CFLAGS)
-             CALL       PGM(QCMDEXC) PARM(&CMD &CMDLEN)
-
-             CHGVAR     VAR(&CMD) VALUE('CRTCMOD MODULE(' *TCAT &MODLIB *TCAT  +
-                        '/CRC32)                 SRCFILE(' *TCAT               +
-                        &SRCLIB *TCAT '/' *TCAT &SRCFILE *TCAT                 +
-                        ') SYSIFCOPT(*IFSIO)' *BCAT &CFLAGS)
-             CALL       PGM(QCMDEXC) PARM(&CMD &CMDLEN)
-
-             CHGVAR     VAR(&CMD) VALUE('CRTCMOD MODULE(' *TCAT &MODLIB *TCAT  +
-                        '/DEFLATE)               SRCFILE(' *TCAT               +
-                        &SRCLIB *TCAT '/' *TCAT &SRCFILE *TCAT                 +
-                        ') SYSIFCOPT(*IFSIO)' *BCAT &CFLAGS)
-             CALL       PGM(QCMDEXC) PARM(&CMD &CMDLEN)
-
-             CHGVAR     VAR(&CMD) VALUE('CRTCMOD MODULE(' *TCAT &MODLIB *TCAT  +
-                        '/GZIO)                  SRCFILE(' *TCAT               +
-                        &SRCLIB *TCAT '/' *TCAT &SRCFILE *TCAT                 +
-                        ') SYSIFCOPT(*IFSIO)' *BCAT &CFLAGS)
-             CALL       PGM(QCMDEXC) PARM(&CMD &CMDLEN)
-
-             CHGVAR     VAR(&CMD) VALUE('CRTCMOD MODULE(' *TCAT &MODLIB *TCAT  +
-                        '/INFBACK)               SRCFILE(' *TCAT               +
-                        &SRCLIB *TCAT '/' *TCAT &SRCFILE *TCAT                 +
-                        ') SYSIFCOPT(*IFSIO)' *BCAT &CFLAGS)
-             CALL       PGM(QCMDEXC) PARM(&CMD &CMDLEN)
-
-             CHGVAR     VAR(&CMD) VALUE('CRTCMOD MODULE(' *TCAT &MODLIB *TCAT  +
-                        '/INFFAST)               SRCFILE(' *TCAT               +
-                        &SRCLIB *TCAT '/' *TCAT &SRCFILE *TCAT                 +
-                        ') SYSIFCOPT(*IFSIO)' *BCAT &CFLAGS)
-             CALL       PGM(QCMDEXC) PARM(&CMD &CMDLEN)
-
-             CHGVAR     VAR(&CMD) VALUE('CRTCMOD MODULE(' *TCAT &MODLIB *TCAT  +
-                        '/INFLATE)               SRCFILE(' *TCAT               +
-                        &SRCLIB *TCAT '/' *TCAT &SRCFILE *TCAT                 +
-                        ') SYSIFCOPT(*IFSIO)' *BCAT &CFLAGS)
-             CALL       PGM(QCMDEXC) PARM(&CMD &CMDLEN)
-
-             CHGVAR     VAR(&CMD) VALUE('CRTCMOD MODULE(' *TCAT &MODLIB *TCAT  +
-                        '/INFTREES)              SRCFILE(' *TCAT               +
-                        &SRCLIB *TCAT '/' *TCAT &SRCFILE *TCAT                 +
-                        ') SYSIFCOPT(*IFSIO)' *BCAT &CFLAGS)
-             CALL       PGM(QCMDEXC) PARM(&CMD &CMDLEN)
-
-             CHGVAR     VAR(&CMD) VALUE('CRTCMOD MODULE(' *TCAT &MODLIB *TCAT  +
-                        '/TREES)                 SRCFILE(' *TCAT               +
-                        &SRCLIB *TCAT '/' *TCAT &SRCFILE *TCAT                 +
-                        ') SYSIFCOPT(*IFSIO)' *BCAT &CFLAGS)
-             CALL       PGM(QCMDEXC) PARM(&CMD &CMDLEN)
-
-             CHGVAR     VAR(&CMD) VALUE('CRTCMOD MODULE(' *TCAT &MODLIB *TCAT  +
-                        '/UNCOMPR)               SRCFILE(' *TCAT               +
-                        &SRCLIB *TCAT '/' *TCAT &SRCFILE *TCAT                 +
-                        ') SYSIFCOPT(*IFSIO)' *BCAT &CFLAGS)
-             CALL       PGM(QCMDEXC) PARM(&CMD &CMDLEN)
-
-             CHGVAR     VAR(&CMD) VALUE('CRTCMOD MODULE(' *TCAT &MODLIB *TCAT  +
-                        '/ZUTIL)                 SRCFILE(' *TCAT               +
-                        &SRCLIB *TCAT '/' *TCAT &SRCFILE *TCAT                 +
-                        ') SYSIFCOPT(*IFSIO)' *BCAT &CFLAGS)
-             CALL       PGM(QCMDEXC) PARM(&CMD &CMDLEN)
-
-
-/*      Link modules into a service program.                                  */
-
-             CRTSRVPGM  SRVPGM(&SRVLIB/ZLIB) +
-                          MODULE(&MODLIB/ADLER32     &MODLIB/COMPRESS    +
-                                 &MODLIB/CRC32       &MODLIB/DEFLATE     +
-                                 &MODLIB/GZIO        &MODLIB/INFBACK     +
-                                 &MODLIB/INFFAST     &MODLIB/INFLATE     +
-                                 &MODLIB/INFTREES    &MODLIB/TREES       +
-                                 &MODLIB/UNCOMPR     &MODLIB/ZUTIL)      +
-                          SRCFILE(&SRCLIB/&CTLFILE) SRCMBR(BNDSRC) +
-                          TEXT('ZLIB 1.2.3') TGTRLS(V4R4M0)
-
-             ENDPGM
--- a/projects/visualc6/README.txt
+++ b/projects/visualc6/README.txt
--- a/projects/visualc6/example.dsp
+++ b/projects/visualc6/example.dsp
--- a/projects/visualc6/minigzip.dsp
+++ b/projects/visualc6/minigzip.dsp
--- a/projects/visualc6/zlib.dsp
+++ b/projects/visualc6/zlib.dsp
--- a/projects/visualc6/zlib.dsw
+++ b/projects/visualc6/zlib.dsw
--- a/projects/README.projects
+++ b/projects/README.projects
@@ -1,41 +0,0 @@
-This directory contains project files for building zlib under various
-Integrated Development Environments (IDE).
-
-If you wish to submit a new project to this directory, you should comply
-to the following requirements.  Otherwise (e.g. if you wish to integrate
-a custom piece of code that changes the zlib interface or its behavior),
-please consider submitting the project to the contrib directory.
-
-
-Requirements
-============
-
- The project must build zlib using the source files from the official
-  zlib source distribution, exclusively.
-
- If the project produces redistributable builds (e.g. shared objects
-  or DLL files), these builds must be compatible to those produced by
-  makefiles, if such makefiles exist in the zlib distribution.
-  In particular, if the project produces a DLL build for the Win32
-  platform, this build must comply to the officially-ammended Win32 DLL
-  Application Binary Interface (ABI), described in win32/DLL_FAQ.txt.
-
- The project may provide additional build targets, which depend on
-  3rd-party (unofficially-supported) software, present in the contrib
-  directory.  For example, it is possible to provide an "ASM build",
-  besides the officially-supported build, and have ASM source files
-  among its dependencies.
-
- If there are significant differences between the project files created
-  by different versions of an IDE (e.g. Visual C++ 6.0 vs. 7.0), the name
-  of the project directory should contain the version number of the IDE
-  for which the project is intended (e.g. "visualc6" for Visual C++ 6.0,
-  or "visualc7" for Visual C++ 7.0 and 7.1).
-
-
-Current projects
-================
-
-visualc6/   by Simon-Pierre Cadieux <methodex@methodex.ca>
-            and Cosmin Truta <cosmint@cs.ubbcluj.ro>
-        Project for Microsoft Visual C++ 6.0
--- a/qnx/package.qpg
+++ b/qnx/package.qpg
@@ -25,10 +25,10 @@
      <QPG:Files>
         <QPG:Add file="../zconf.h" install="/opt/include/" user="root:sys" permission="644"/>
         <QPG:Add file="../zlib.h" install="/opt/include/" user="root:sys" permission="644"/>
-         <QPG:Add file="../libz.so.1.2.4.1" install="/opt/lib/" user="root:bin" permission="644"/>
-         <QPG:Add file="libz.so" install="/opt/lib/" component="dev" filetype="symlink" linkto="libz.so.1.2.4.1"/>
-         <QPG:Add file="libz.so.1" install="/opt/lib/" filetype="symlink" linkto="libz.so.1.2.4.1"/>
-         <QPG:Add file="../libz.so.1.2.4.1" install="/opt/lib/" component="slib"/>
+         <QPG:Add file="../libz.so.1.2.5.1" install="/opt/lib/" user="root:bin" permission="644"/>
+         <QPG:Add file="libz.so" install="/opt/lib/" component="dev" filetype="symlink" linkto="libz.so.1.2.5.1"/>
+         <QPG:Add file="libz.so.1" install="/opt/lib/" filetype="symlink" linkto="libz.so.1.2.5.1"/>
+         <QPG:Add file="../libz.so.1.2.5.1" install="/opt/lib/" component="slib"/>
      </QPG:Files>

      <QPG:PackageFilter>
@@ -63,7 +63,7 @@
            </QPM:ProductDescription>

            <QPM:ReleaseDescription>
-               <QPM:ReleaseVersion>1.2.4.1</QPM:ReleaseVersion>
+               <QPM:ReleaseVersion>1.2.5.1</QPM:ReleaseVersion>
               <QPM:ReleaseUrgency>Medium</QPM:ReleaseUrgency>
               <QPM:ReleaseStability>Stable</QPM:ReleaseStability>
               <QPM:ReleaseNoteMinor></QPM:ReleaseNoteMinor>
--- a/treebuild.xml
+++ b/treebuild.xml
@@ -1,6 +1,6 @@
 <?xml version="1.0" ?>
-<package name="zlib" version="1.2.4.1">
-    <library name="zlib" dlversion="1.2.4.1" dlname="z">
+<package name="zlib" version="1.2.5.1">
+    <library name="zlib" dlversion="1.2.5.1" dlname="z">
 	<property name="description"> zip compression library </property>
 	<property name="include-target-dir" value="$(@PACKAGE/install-includedir)" />

--- a/trees.c
+++ b/trees.c
@@ -1,5 +1,5 @@
 /* trees.c -- output deflated data using Huffman coding
- * Copyright (C) 1995-2009 Jean-loup Gailly
+ * Copyright (C) 1995-2010 Jean-loup Gailly
 * detect_data_type() function provided freely by Cosmin Truta, 2006
 * For conditions of distribution and use, see copyright notice in zlib.h
 */
@@ -351,13 +351,14 @@ void gen_trees_header()
                static_dtree[i].Len, SEPARATOR(i, D_CODES-1, 5));
    }

-    fprintf(header, "const uch _dist_code[DIST_CODE_LEN] = {\n");
+    fprintf(header, "const uch ZLIB_INTERNAL _dist_code[DIST_CODE_LEN] = {\n");
    for (i = 0; i < DIST_CODE_LEN; i++) {
        fprintf(header, "%2u%s", _dist_code[i],
                SEPARATOR(i, DIST_CODE_LEN-1, 20));
    }

-    fprintf(header, "const uch _length_code[MAX_MATCH-MIN_MATCH+1]= {\n");
+    fprintf(header,
+        "const uch ZLIB_INTERNAL _length_code[MAX_MATCH-MIN_MATCH+1]= {\n");
    for (i = 0; i < MAX_MATCH-MIN_MATCH+1; i++) {
        fprintf(header, "%2u%s", _length_code[i],
                SEPARATOR(i, MAX_MATCH-MIN_MATCH, 20));
@@ -382,7 +383,7 @@ void gen_trees_header()
 /* ===========================================================================
 * Initialize the tree data structures for a new zlib stream.
 */
-void _tr_init(s)
+void ZLIB_INTERNAL _tr_init(s)
    deflate_state *s;
 {
    tr_static_init();
@@ -867,7 +868,7 @@ local void send_all_trees(s, lcodes, dcodes, blcodes)
 /* ===========================================================================
 * Send a stored block
 */
-void _tr_stored_block(s, buf, stored_len, last)
+void ZLIB_INTERNAL _tr_stored_block(s, buf, stored_len, last)
    deflate_state *s;
    charf *buf;       /* input block */
    ulg stored_len;   /* length of input block */
@@ -892,7 +893,7 @@ void _tr_stored_block(s, buf, stored_len, last)
 * To simplify the code, we assume the worst case of last real code encoded
 * on one bit only.
 */
-void _tr_align(s)
+void ZLIB_INTERNAL _tr_align(s)
    deflate_state *s;
 {
    send_bits(s, STATIC_TREES<<1, 3);
@@ -921,7 +922,7 @@ void _tr_align(s)
 * Determine the best encoding for the current block: dynamic trees, static
 * trees or store, and output the encoded block to the zip file.
 */
-void _tr_flush_block(s, buf, stored_len, last)
+void ZLIB_INTERNAL _tr_flush_block(s, buf, stored_len, last)
    deflate_state *s;
    charf *buf;       /* input block, or NULL if too old */
    ulg stored_len;   /* length of input block */
@@ -1022,7 +1023,7 @@ void _tr_flush_block(s, buf, stored_len, last)
 * Save the match info and tally the frequency counts. Return true if
 * the current block must be flushed.
 */
-int _tr_tally (s, dist, lc)
+int ZLIB_INTERNAL _tr_tally (s, dist, lc)
    deflate_state *s;
    unsigned dist;  /* distance of matched string */
    unsigned lc;    /* match length-MIN_MATCH or unmatched char (if dist==0) */
--- a/trees.h
+++ b/trees.h
@@ -70,7 +70,7 @@ local const ct_data static_dtree[D_CODES] = {
 {{19},{ 5}}, {{11},{ 5}}, {{27},{ 5}}, {{ 7},{ 5}}, {{23},{ 5}}
 };

-const uch _dist_code[DIST_CODE_LEN] = {
+const uch ZLIB_INTERNAL _dist_code[DIST_CODE_LEN] = {
 0,  1,  2,  3,  4,  4,  5,  5,  6,  6,  6,  6,  7,  7,  7,  7,  8,  8,  8,  8,
 8,  8,  8,  8,  9,  9,  9,  9,  9,  9,  9,  9, 10, 10, 10, 10, 10, 10, 10, 10,
 10, 10, 10, 10, 10, 10, 10, 10, 11, 11, 11, 11, 11, 11, 11, 11, 11, 11, 11, 11,
@@ -99,7 +99,7 @@ const uch _dist_code[DIST_CODE_LEN] = {
 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29
 };

-const uch _length_code[MAX_MATCH-MIN_MATCH+1]= {
+const uch ZLIB_INTERNAL _length_code[MAX_MATCH-MIN_MATCH+1]= {
 0,  1,  2,  3,  4,  5,  6,  7,  8,  8,  9,  9, 10, 10, 11, 11, 12, 12, 12, 12,
 13, 13, 13, 13, 14, 14, 14, 14, 15, 15, 15, 15, 16, 16, 16, 16, 16, 16, 16, 16,
 17, 17, 17, 17, 17, 17, 17, 17, 18, 18, 18, 18, 18, 18, 18, 18, 19, 19, 19, 19,
--- a/win32/Makefile.gcc
+++ b/win32/Makefile.gcc
@@ -25,7 +25,12 @@

 STATICLIB = libz.a
 SHAREDLIB = zlib1.dll
-IMPLIB    = libzdll.a
+IMPLIB    = libz.dll.a
+
+#
+# Set to 1 if shared object needs to be installed
+#
+SHARED_MODE=0

 #LOC = -DASMV
 #LOC = -DDEBUG -g
@@ -33,12 +38,13 @@ IMPLIB    = libzdll.a
 PREFIX =
 CC = $(PREFIX)gcc
 CFLAGS = $(LOC) -O3 -Wall
+EXTRA_CFLAGS = -DNO_VIZ

 AS = $(CC)
 ASFLAGS = $(LOC) -Wall

 LD = $(CC)
-LDFLAGS = $(LOC) -s
+LDFLAGS = $(LOC)

 AR = $(PREFIX)ar
 ARFLAGS = rcs
@@ -53,7 +59,7 @@ CP = cp -fp
 INSTALL = $(CP)
 RM = rm -f

-prefix = /usr/local
+prefix ?= /usr/local
 exec_prefix = $(prefix)

 OBJS = adler32.o compress.o crc32.o deflate.o gzclose.o gzlib.o gzread.o \
@@ -71,7 +77,7 @@ testdll: example_d.exe minigzip_d.exe
 	echo hello world | ./minigzip_d | ./minigzip_d -d

 .c.o:
-	$(CC) $(CFLAGS) -c -o $@ $<
+	$(CC) $(CFLAGS) $(EXTRA_CFLAGS) -c -o $@ $<

 .S.o:
 	$(AS) $(ASFLAGS) -c -o $@ $<
@@ -82,43 +88,62 @@ $(STATICLIB): $(OBJS) $(OBJA)
 $(IMPLIB): $(SHAREDLIB)

 $(SHAREDLIB): win32/zlib.def $(OBJS) $(OBJA) zlibrc.o
-	$(CC) -shared -Wl,--out-implib,$(IMPLIB) \
+	$(CC) -shared -Wl,--out-implib,$(IMPLIB) $(LDFLAGS) \
 	-o $@ win32/zlib.def $(OBJS) $(OBJA) zlibrc.o
 	$(STRIP) $@

 example.exe: example.o $(STATICLIB)
 	$(LD) $(LDFLAGS) -o $@ example.o $(STATICLIB)
+	$(STRIP) $@

 minigzip.exe: minigzip.o $(STATICLIB)
 	$(LD) $(LDFLAGS) -o $@ minigzip.o $(STATICLIB)
+	$(STRIP) $@

 example_d.exe: example.o $(IMPLIB)
 	$(LD) $(LDFLAGS) -o $@ example.o $(IMPLIB)
+	$(STRIP) $@

 minigzip_d.exe: minigzip.o $(IMPLIB)
 	$(LD) $(LDFLAGS) -o $@ minigzip.o $(IMPLIB)
+	$(STRIP) $@

 zlibrc.o: win32/zlib1.rc
 	$(RC) $(RCFLAGS) -o $@ win32/zlib1.rc


-# INCLUDE_PATH and LIBRARY_PATH must be set.
+# BINARY_PATH, INCLUDE_PATH and LIBRARY_PATH must be set.

 .PHONY: install uninstall clean

-install: zlib.h zconf.h $(LIB)
+install: zlib.h zconf.h $(STATICLIB) $(IMPLIB)
 	-@mkdir -p $(INCLUDE_PATH)
-	-@mkdir -p $(LIBRARY_PATH)
+	-@mkdir -p $(LIBRARY_PATH) $(LIBRARY_PATH)/pkgconfig
+	-if [ "$(SHARED_MODE)" = "1" ]; then \
+		mkdir -p $(BINARY_PATH); \
+		$(INSTALL) $(SHAREDLIB) $(BINARY_PATH); \
+		$(INSTALL) $(IMPLIB) $(LIBRARY_PATH); \
+	fi
 	-$(INSTALL) zlib.h $(INCLUDE_PATH)
 	-$(INSTALL) zconf.h $(INCLUDE_PATH)
 	-$(INSTALL) $(STATICLIB) $(LIBRARY_PATH)
-	-$(INSTALL) $(IMPLIB) $(LIBRARY_PATH)
+	sed \
+		-e 's|@prefix@|${prefix}|g' \
+		-e 's|@exec_prefix@|${exec_prefix}|g' \
+		-e 's|@libdir@|$(LIBRARY_PATH)|g' \
+		-e 's|@sharedlibdir@|$(LIBRARY_PATH)|g' \
+		-e 's|@includedir@|$(INCLUDE_PATH)|g' \
+		-e 's|@VERSION@|'`sed -n -e '/VERSION "/s/.*"\(.*\)".*/\1/p' zlib.h`'|g' \
+		zlib.pc.in > $(LIBRARY_PATH)/pkgconfig/zlib.pc

 uninstall:
+	-if [ "$(SHARED_MODE)" = "1" ]; then \
+		$(RM) $(BINARY_PATH)/$(SHAREDLIB); \
+		$(RM) $(LIBRARY_PATH)/$(IMPLIB); \
+	fi
 	-$(RM) $(INCLUDE_PATH)/zlib.h
 	-$(RM) $(INCLUDE_PATH)/zconf.h
 	-$(RM) $(LIBRARY_PATH)/$(STATICLIB)
-	-$(RM) $(LIBRARY_PATH)/$(IMPLIB)

 clean:
 	-$(RM) $(STATICLIB)
--- a/win32/Makefile.msc
+++ b/win32/Makefile.msc
@@ -2,15 +2,16 @@
 # zlib is copyright (C) 1995-2006 Jean-loup Gailly and Mark Adler
 #
 # Usage:
-#   nmake -f win32/Makefile.msc            (standard build)
-#   nmake -f win32/Makefile.msc LOC=-DFOO  (nonstandard build)
-#   nmake -f win32/Makefile.msc LOC=-DASMV OBJA=match.obj  (use ASM code)
-
+#   nmake -f win32/Makefile.msc                          (standard build)
+#   nmake -f win32/Makefile.msc LOC=-DFOO                (nonstandard build)
+#   nmake -f win32/Makefile.msc LOC="-DASMV -DASMINF" \
+#         OBJA="inffas32.obj match686.obj"               (use ASM code, x86)
+#   nmake -f win32/Makefile.msc AS=ml64 LOC="-DASMV -DASMINF" \
+#         OBJA="inffasx64.obj gvmat64.obj inffas8664.c"  (use ASM code, x64)

 # optional build flags
 LOC =

-
 # variables
 STATICLIB = zlib.lib
 SHAREDLIB = zlib1.dll
@@ -23,13 +24,13 @@ AR = lib
 RC = rc
 CFLAGS  = -nologo -MD -W3 -O2 -Oy- -Zi -Fd"zlib" $(LOC)
 WFLAGS  = -D_CRT_SECURE_NO_DEPRECATE -D_CRT_NONSTDC_NO_DEPRECATE
-ASFLAGS = -coff -Zi
+ASFLAGS = -coff -Zi $(LOC)
 LDFLAGS = -nologo -debug -incremental:no -opt:ref
 ARFLAGS = -nologo
 RCFLAGS = /dWIN32 /r

 OBJS = adler32.obj compress.obj crc32.obj deflate.obj gzclose.obj gzlib.obj gzread.obj \
-       gzwrite.obj infback.obj inffast.obj inflate.obj inftrees.obj trees.obj uncompr.obj zutil.obj
+       gzwrite.obj infback.obj inflate.obj inftrees.obj inffast.obj trees.obj uncompr.obj zutil.obj
 OBJA =


@@ -71,7 +72,13 @@ minigzip_d.exe: minigzip.obj $(IMPLIB)
 .c.obj:
 	$(CC) -c $(WFLAGS) $(CFLAGS) $<

-.asm.obj:
+{contrib/masmx64}.c.obj:
+	$(CC) -c $(WFLAGS) $(CFLAGS) $<
+
+{contrib/masmx64}.asm.obj:
+	$(AS) -c $(ASFLAGS) $<
+
+{contrib/masmx86}.asm.obj:
 	$(AS) -c $(ASFLAGS) $<

 adler32.obj: adler32.c zlib.h zconf.h
@@ -107,6 +114,17 @@ uncompr.obj: uncompr.c zlib.h zconf.h

 zutil.obj: zutil.c zutil.h zlib.h zconf.h

+gvmat64.obj: contrib\masmx64\gvmat64.asm
+
+inffasx64.obj: contrib\masmx64\inffasx64.asm
+
+inffas8664.obj: contrib\masmx64\inffas8664.c zutil.h zlib.h zconf.h \
+		inftrees.h inflate.h inffast.h
+
+inffas32.obj: contrib\masmx86\inffas32.asm
+
+match686.obj: contrib\masmx86\match686.asm
+
 example.obj: example.c zlib.h zconf.h

 minigzip.obj: minigzip.c zlib.h zconf.h
--- a/win32/README-WIN32.txt
+++ b/win32/README-WIN32.txt
@@ -47,9 +47,9 @@ The package zlib-1.2.4-win32-x86.zip contains the following files:
  zdll.lib         Install these files into the compilers' LIB path if linking
  zdll.exp         a compiled program to the zlib1.dll binary

-  zlib.lib         Install these files into the compilers' LIB path if linking
-  zlib.pdb         a compiled program to the zlib1.dll binary (zlib.pdb ensures
-                   that the resulting program may be debugged)
+  zlib.lib         Install these files into the compilers' LIB path to link zlib
+  zlib.pdb         into compiled programs, without zlib1.dll runtime dependency
+                   (zlib.pdb provides debugging info to the compile time linker)

  zlib1.dll        Install this binary shared library into the system PATH, or
                   the program's runtime directory (where the .exe resides)
--- a/win32/zlib.def
+++ b/win32/zlib.def
@@ -15,6 +15,7 @@ EXPORTS
    deflateParams
    deflateTune
    deflateBound
+    deflatePending
    deflatePrime
    deflateSetHeader
    inflateSetDictionary
--- a/zconf.h
+++ b/zconf.h
@@ -1,5 +1,5 @@
 /* zconf.h -- configuration of the zlib compression library
- * Copyright (C) 1995-2010 Jean-loup Gailly.
+ * Copyright (C) 1995-2011 Jean-loup Gailly.
 * For conditions of distribution and use, see copyright notice in zlib.h
 */

@@ -15,6 +15,7 @@
 * this permanently in zconf.h using "./configure --zprefix".
 */
 #ifdef Z_PREFIX     /* may be set to #if 1 by ./configure */
+#  define Z_PREFIX_SET

 /* all linked symbols */
 #  define _dist_code            z__dist_code
@@ -40,6 +41,7 @@
 #  define deflateInit2_         z_deflateInit2_
 #  define deflateInit_          z_deflateInit_
 #  define deflateParams         z_deflateParams
+#  define deflatePending        z_deflatePending
 #  define deflatePrime          z_deflatePrime
 #  define deflateReset          z_deflateReset
 #  define deflateSetDictionary  z_deflateSetDictionary
@@ -243,6 +245,14 @@
 #  endif
 #endif

+#ifndef ON /* function prototypes for stdarg */
+#  if defined(STDC) || defined(Z_HAVE_STDARG_H)
+#    define ON(args)  args
+#  else
+#    define ON(args)  ()
+#  endif
+#endif
+
 /* The following definitions for FAR are needed only for MSDOS mixed
 * model programming (small or medium model with some far allocations).
 * This was tested only with MSC; for other MSDOS compilers you may have
@@ -315,10 +325,6 @@
 #  endif
 #endif

-#ifdef HAVE_VISIBILITY_PRAGMA
-#  define ZEXTERN __attribute__((visibility ("default"))) extern
-#endif
-
 #ifndef ZEXTERN
 #  define ZEXTERN extern
 #endif
@@ -364,8 +370,29 @@ typedef uLong FAR uLongf;
 #  define Z_HAVE_UNISTD_H
 #endif

-#if defined(Z_HAVE_UNISTD_H) || _LARGEFILE64_SOURCE == 1
+#ifdef HAVE_STDARG_H    /* may be set to #if 1 by ./configure */
+#  define Z_HAVE_STDARG_H
+#endif
+
+#ifdef STDC
 #  include <sys/types.h>    /* for off_t */
+#endif
+
+/* a little trick to accommodate both "#define _LARGEFILE64_SOURCE" and
+ * "#define _LARGEFILE64_SOURCE 1" as requesting 64-bit operations, (even
+ * though the former does not conform to the LFS document), but considering
+ * both "#undef _LARGEFILE64_SOURCE" and "#define _LARGEFILE64_SOURCE 0" as
+ * equivalently requesting no 64-bit operations
+ */
+#if -_LARGEFILE64_SOURCE - -1 == 1
+#  undef _LARGEFILE64_SOURCE
+#endif
+
+#if defined(_LARGEFILE64_SOURCE) && _LFS64_LARGEFILE-0
+#  define Z_LARGE
+#endif
+
+#if defined(Z_HAVE_UNISTD_H) || defined(Z_LARGE)
 #  include <unistd.h>       /* for SEEK_* and off_t */
 #  ifdef VMS
 #    include <unixio.h>     /* for off_t */
@@ -385,6 +412,12 @@ typedef uLong FAR uLongf;
 #  define z_off_t long
 #endif

+#if defined(_LARGEFILE64_SOURCE) && _LFS64_LARGEFILE-0
+#  define z_off64_t off64_t
+#else
+#  define z_off64_t z_off_t
+#endif
+
 #if defined(__OS400__)
 #  define NO_vsnprintf
 #endif
--- a/zconf.h.cmakein
+++ b/zconf.h.cmakein
@@ -1,5 +1,5 @@
 /* zconf.h -- configuration of the zlib compression library
- * Copyright (C) 1995-2010 Jean-loup Gailly.
+ * Copyright (C) 1995-2011 Jean-loup Gailly.
 * For conditions of distribution and use, see copyright notice in zlib.h
 */

@@ -17,6 +17,7 @@
 * this permanently in zconf.h using "./configure --zprefix".
 */
 #ifdef Z_PREFIX     /* may be set to #if 1 by ./configure */
+#  define Z_PREFIX_SET

 /* all linked symbols */
 #  define _dist_code            z__dist_code
@@ -42,6 +43,7 @@
 #  define deflateInit2_         z_deflateInit2_
 #  define deflateInit_          z_deflateInit_
 #  define deflateParams         z_deflateParams
+#  define deflatePending        z_deflatePending
 #  define deflatePrime          z_deflatePrime
 #  define deflateReset          z_deflateReset
 #  define deflateSetDictionary  z_deflateSetDictionary
@@ -245,6 +247,14 @@
 #  endif
 #endif

+#ifndef ON /* function prototypes for stdarg */
+#  if defined(STDC) || defined(Z_HAVE_STDARG_H)
+#    define ON(args)  args
+#  else
+#    define ON(args)  ()
+#  endif
+#endif
+
 /* The following definitions for FAR are needed only for MSDOS mixed
 * model programming (small or medium model with some far allocations).
 * This was tested only with MSC; for other MSDOS compilers you may have
@@ -317,10 +327,6 @@
 #  endif
 #endif

-#ifdef HAVE_VISIBILITY_PRAGMA
-#  define ZEXTERN __attribute__((visibility ("default"))) extern
-#endif
-
 #ifndef ZEXTERN
 #  define ZEXTERN extern
 #endif
@@ -366,8 +372,29 @@ typedef uLong FAR uLongf;
 #  define Z_HAVE_UNISTD_H
 #endif

-#if defined(Z_HAVE_UNISTD_H) || _LARGEFILE64_SOURCE == 1
+#ifdef HAVE_STDARG_H    /* may be set to #if 1 by ./configure */
+#  define Z_HAVE_STDARG_H
+#endif
+
+#ifdef STDC
 #  include <sys/types.h>    /* for off_t */
+#endif
+
+/* a little trick to accommodate both "#define _LARGEFILE64_SOURCE" and
+ * "#define _LARGEFILE64_SOURCE 1" as requesting 64-bit operations, (even
+ * though the former does not conform to the LFS document), but considering
+ * both "#undef _LARGEFILE64_SOURCE" and "#define _LARGEFILE64_SOURCE 0" as
+ * equivalently requesting no 64-bit operations
+ */
+#if -_LARGEFILE64_SOURCE - -1 == 1
+#  undef _LARGEFILE64_SOURCE
+#endif
+
+#if defined(_LARGEFILE64_SOURCE) && _LFS64_LARGEFILE-0
+#  define Z_LARGE
+#endif
+
+#if defined(Z_HAVE_UNISTD_H) || defined(Z_LARGE)
 #  include <unistd.h>       /* for SEEK_* and off_t */
 #  ifdef VMS
 #    include <unixio.h>     /* for off_t */
@@ -387,6 +414,12 @@ typedef uLong FAR uLongf;
 #  define z_off_t long
 #endif

+#if defined(_LARGEFILE64_SOURCE) && _LFS64_LARGEFILE-0
+#  define z_off64_t off64_t
+#else
+#  define z_off64_t z_off_t
+#endif
+
 #if defined(__OS400__)
 #  define NO_vsnprintf
 #endif
--- a/zconf.h.in
+++ b/zconf.h.in
@@ -1,5 +1,5 @@
 /* zconf.h -- configuration of the zlib compression library
- * Copyright (C) 1995-2010 Jean-loup Gailly.
+ * Copyright (C) 1995-2011 Jean-loup Gailly.
 * For conditions of distribution and use, see copyright notice in zlib.h
 */

@@ -15,6 +15,7 @@
 * this permanently in zconf.h using "./configure --zprefix".
 */
 #ifdef Z_PREFIX     /* may be set to #if 1 by ./configure */
+#  define Z_PREFIX_SET

 /* all linked symbols */
 #  define _dist_code            z__dist_code
@@ -40,6 +41,7 @@
 #  define deflateInit2_         z_deflateInit2_
 #  define deflateInit_          z_deflateInit_
 #  define deflateParams         z_deflateParams
+#  define deflatePending        z_deflatePending
 #  define deflatePrime          z_deflatePrime
 #  define deflateReset          z_deflateReset
 #  define deflateSetDictionary  z_deflateSetDictionary
@@ -243,6 +245,14 @@
 #  endif
 #endif

+#ifndef ON /* function prototypes for stdarg */
+#  if defined(STDC) || defined(Z_HAVE_STDARG_H)
+#    define ON(args)  args
+#  else
+#    define ON(args)  ()
+#  endif
+#endif
+
 /* The following definitions for FAR are needed only for MSDOS mixed
 * model programming (small or medium model with some far allocations).
 * This was tested only with MSC; for other MSDOS compilers you may have
@@ -315,10 +325,6 @@
 #  endif
 #endif

-#ifdef HAVE_VISIBILITY_PRAGMA
-#  define ZEXTERN __attribute__((visibility ("default"))) extern
-#endif
-
 #ifndef ZEXTERN
 #  define ZEXTERN extern
 #endif
@@ -364,8 +370,29 @@ typedef uLong FAR uLongf;
 #  define Z_HAVE_UNISTD_H
 #endif

-#if defined(Z_HAVE_UNISTD_H) || _LARGEFILE64_SOURCE == 1
+#ifdef HAVE_STDARG_H    /* may be set to #if 1 by ./configure */
+#  define Z_HAVE_STDARG_H
+#endif
+
+#ifdef STDC
 #  include <sys/types.h>    /* for off_t */
+#endif
+
+/* a little trick to accommodate both "#define _LARGEFILE64_SOURCE" and
+ * "#define _LARGEFILE64_SOURCE 1" as requesting 64-bit operations, (even
+ * though the former does not conform to the LFS document), but considering
+ * both "#undef _LARGEFILE64_SOURCE" and "#define _LARGEFILE64_SOURCE 0" as
+ * equivalently requesting no 64-bit operations
+ */
+#if -_LARGEFILE64_SOURCE - -1 == 1
+#  undef _LARGEFILE64_SOURCE
+#endif
+
+#if defined(_LARGEFILE64_SOURCE) && _LFS64_LARGEFILE-0
+#  define Z_LARGE
+#endif
+
+#if defined(Z_HAVE_UNISTD_H) || defined(Z_LARGE)
 #  include <unistd.h>       /* for SEEK_* and off_t */
 #  ifdef VMS
 #    include <unixio.h>     /* for off_t */
@@ -385,6 +412,12 @@ typedef uLong FAR uLongf;
 #  define z_off_t long
 #endif

+#if defined(_LARGEFILE64_SOURCE) && _LFS64_LARGEFILE-0
+#  define z_off64_t off64_t
+#else
+#  define z_off64_t z_off_t
+#endif
+
 #if defined(__OS400__)
 #  define NO_vsnprintf
 #endif
--- a/zlib.3
+++ b/zlib.3
@@ -1,4 +1,4 @@
-.TH ZLIB 3 "28 Mar 2010"
+.TH ZLIB 3 "10 Sep 2011"
 .SH NAME
 zlib \- compression/decompression library
 .SH SYNOPSIS
@@ -95,11 +95,11 @@ http://zlib.net/
 The data format used by the zlib library is described by RFC
 (Request for Comments) 1950 to 1952 in the files:
 .IP
-http://www.ietf.org/rfc/rfc1950.txt (for the zlib header and trailer format)
+http://tools.ietf.org/html/rfc1950 (for the zlib header and trailer format)
 .br
-http://www.ietf.org/rfc/rfc1951.txt (for the deflate compressed data format)
+http://tools.ietf.org/html/rfc1951 (for the deflate compressed data format)
 .br
-http://www.ietf.org/rfc/rfc1952.txt (for the gzip header and trailer format)
+http://tools.ietf.org/html/rfc1952 (for the gzip header and trailer format)
 .LP
 Mark Nelson wrote an article about
 .I zlib
@@ -125,8 +125,8 @@ before asking for help.
 Send questions and/or comments to zlib@gzip.org,
 or (for the Windows DLL version) to Gilles Vollant (info@winimage.com).
 .SH AUTHORS
-Version 1.2.4.1
-Copyright (C) 1995-2010 Jean-loup Gailly (jloup@gzip.org)
+Version 1.2.5.1
+Copyright (C) 1995-2011 Jean-loup Gailly (jloup@gzip.org)
 and Mark Adler (madler@alumni.caltech.edu).
 .LP
 This software is provided "as-is,"
--- a/zlib.3.pdf
+++ b/zlib.3.pdf
--- a/zlib.h
+++ b/zlib.h
@@ -1,7 +1,7 @@
 /* zlib.h -- interface of the 'zlib' general purpose compression library
-  version 1.2.4.1, March 28th, 2010
+  version 1.2.5.1, September 10th, 2011

-  Copyright (C) 1995-2010 Jean-loup Gailly and Mark Adler
+  Copyright (C) 1995-2011 Jean-loup Gailly and Mark Adler

  This software is provided 'as-is', without any express or implied
  warranty.  In no event will the authors be held liable for any damages
@@ -24,8 +24,8 @@


  The data format used by the zlib library is described by RFCs (Request for
-  Comments) 1950 to 1952 in the files http://www.ietf.org/rfc/rfc1950.txt
-  (zlib format), rfc1951.txt (deflate format) and rfc1952.txt (gzip format).
+  Comments) 1950 to 1952 in the files http://tools.ietf.org/html/rfc1950
+  (zlib format), rfc1951 (deflate format) and rfc1952 (gzip format).
 */

 #ifndef ZLIB_H
@@ -37,11 +37,11 @@
 extern "C" {
 #endif

-#define ZLIB_VERSION "1.2.4.1"
-#define ZLIB_VERNUM 0x1241
+#define ZLIB_VERSION "1.2.5.1"
+#define ZLIB_VERNUM 0x1251
 #define ZLIB_VER_MAJOR 1
 #define ZLIB_VER_MINOR 2
-#define ZLIB_VER_REVISION 4
+#define ZLIB_VER_REVISION 5
 #define ZLIB_VER_SUBREVISION 1

 /*
@@ -85,11 +85,11 @@ struct internal_state;
 typedef struct z_stream_s {
    Bytef    *next_in;  /* next input byte */
    uInt     avail_in;  /* number of bytes available at next_in */
-    uLong    total_in;  /* total nb of input bytes read so far */
+    uLong    total_in;  /* total number of input bytes read so far */

    Bytef    *next_out; /* next output byte should be put there */
    uInt     avail_out; /* remaining free space at next_out */
-    uLong    total_out; /* total nb of bytes output so far */
+    uLong    total_out; /* total number of bytes output so far */

    char     *msg;      /* last error message, NULL if no error */
    struct internal_state FAR *state; /* not visible by applications */
@@ -327,8 +327,9 @@ ZEXTERN int ZEXPORT deflate OF((z_streamp strm, int flush));

    Z_FINISH can be used immediately after deflateInit if all the compression
  is to be done in a single step.  In this case, avail_out must be at least the
-  value returned by deflateBound (see below).  If deflate does not return
-  Z_STREAM_END, then it must be called again as described above.
+  value returned by deflateBound (see below).  Then deflate is guaranteed to
+  return Z_STREAM_END.  If not enough output space is provided, deflate will
+  not return Z_STREAM_END, and it must be called again as described above.

    deflate() sets strm->adler to the adler32 checksum of all input read
  so far (that is, total_in bytes).
@@ -688,8 +689,27 @@ ZEXTERN uLong ZEXPORT deflateBound OF((z_streamp strm,
   deflation of sourceLen bytes.  It must be called after deflateInit() or
   deflateInit2(), and after deflateSetHeader(), if used.  This would be used
   to allocate an output buffer for deflation in a single pass, and so would be
-   called before deflate().
+   called before deflate().  If that first deflate() call is provided the
+   sourceLen input bytes, an output buffer allocated to the size returned by
+   deflateBound(), and the flush value Z_FINISH, then deflate() is guaranteed
+   to return Z_STREAM_END.  Note that it is possible for the compressed size to
+   be larger than the value returned by deflateBound() if flush options other
+   than Z_FINISH or Z_NO_FLUSH are used.
 */
+    
+ZEXTERN int ZEXPORT deflatePending OF((z_streamp strm,
+                                       unsigned *pending,
+                                       int *bits));
+/*
+     deflatePending() returns the number of bytes and bits of output that have
+   been generated, but not yet provided in the available output.  The bytes not
+   provided would be due to the available output space having being consumed.
+   The number of bits of output not provided are between 0 and 7, where they
+   await more bits to join them in order to fill out a full byte.
+ 
+     deflatePending returns Z_OK if success, or Z_STREAM_ERROR if the source
+   stream state was inconsistent.
+ */

 ZEXTERN int ZEXPORT deflatePrime OF((z_streamp strm,
                                     int bits,
@@ -805,17 +825,21 @@ ZEXTERN int ZEXPORT inflateSetDictionary OF((z_streamp strm,

 ZEXTERN int ZEXPORT inflateSync OF((z_streamp strm));
 /*
-     Skips invalid compressed data until a full flush point (see above the
-   description of deflate with Z_FULL_FLUSH) can be found, or until all
+     Skips invalid compressed data until a possible full flush point (see above
+   for the description of deflate with Z_FULL_FLUSH) can be found, or until all
   available input is skipped.  No output is provided.

-     inflateSync returns Z_OK if a full flush point has been found, Z_BUF_ERROR
-   if no more input was provided, Z_DATA_ERROR if no flush point has been
-   found, or Z_STREAM_ERROR if the stream structure was inconsistent.  In the
-   success case, the application may save the current current value of total_in
-   which indicates where valid compressed data was found.  In the error case,
-   the application may repeatedly call inflateSync, providing more input each
-   time, until success or end of the input data.
+     inflateSync searches for a 00 00 FF FF pattern in the compressed data.
+   All full flush points have this pattern, but not all occurences of this
+   pattern are full flush points.
+
+     inflateSync returns Z_OK if a possible full flush point has been found,
+   Z_BUF_ERROR if no more input was provided, Z_DATA_ERROR if no flush point
+   has been found, or Z_STREAM_ERROR if the stream structure was inconsistent.
+   In the success case, the application may save the current current value of
+   total_in which indicates where valid compressed data was found.  In the
+   error case, the application may repeatedly call inflateSync, providing more
+   input each time, until success or end of the input data.
 */

 ZEXTERN int ZEXPORT inflateCopy OF((z_streamp dest,
@@ -962,7 +986,7 @@ ZEXTERN int ZEXPORT inflateBackInit OF((z_streamp strm, int windowBits,
     See inflateBack() for the usage of these routines.

     inflateBackInit will return Z_OK on success, Z_STREAM_ERROR if any of
-   the paramaters are invalid, Z_MEM_ERROR if the internal state could not be
+   the parameters are invalid, Z_MEM_ERROR if the internal state could not be
   allocated, or Z_VERSION_ERROR if the version of the library does not match
   the version of the header file.
 */
@@ -1256,7 +1280,7 @@ ZEXTERN int ZEXPORT gzwrite OF((gzFile file,
   error.
 */

-ZEXTERN int ZEXPORTVA gzprintf OF((gzFile file, const char *format, ...));
+ZEXTERN int ZEXPORTVA gzprintf ON((gzFile file, const char *format, ...));
 /*
     Converts, formats, and writes the arguments to the compressed file under
   control of the format string, as in fprintf.  gzprintf returns the number of
@@ -1492,7 +1516,9 @@ ZEXTERN uLong ZEXPORT adler32_combine OF((uLong adler1, uLong adler2,
     Combine two Adler-32 checksums into one.  For two sequences of bytes, seq1
   and seq2 with lengths len1 and len2, Adler-32 checksums were calculated for
   each, adler1 and adler2.  adler32_combine() returns the Adler-32 checksum of
-   seq1 and seq2 concatenated, requiring only adler1, adler2, and len2.
+   seq1 and seq2 concatenated, requiring only adler1, adler2, and len2.  Note
+   that the z_off_t type (like off_t) is a signed integer.  If len2 is
+   negative, the result has no meaning or utility.
 */

 ZEXTERN uLong ZEXPORT crc32   OF((uLong crc, const Bytef *buf, uInt len));
@@ -1544,41 +1570,57 @@ ZEXTERN int ZEXPORT inflateBackInit_ OF((z_streamp strm, int windowBits,
                                         const char *version,
                                         int stream_size));
 #define deflateInit(strm, level) \
-        deflateInit_((strm), (level),       ZLIB_VERSION, sizeof(z_stream))
+        deflateInit_((strm), (level), ZLIB_VERSION, (int)sizeof(z_stream))
 #define inflateInit(strm) \
-        inflateInit_((strm),                ZLIB_VERSION, sizeof(z_stream))
+        inflateInit_((strm), ZLIB_VERSION, (int)sizeof(z_stream))
 #define deflateInit2(strm, level, method, windowBits, memLevel, strategy) \
        deflateInit2_((strm),(level),(method),(windowBits),(memLevel),\
-                      (strategy),           ZLIB_VERSION, sizeof(z_stream))
+                      (strategy), ZLIB_VERSION, (int)sizeof(z_stream))
 #define inflateInit2(strm, windowBits) \
-        inflateInit2_((strm), (windowBits), ZLIB_VERSION, sizeof(z_stream))
+        inflateInit2_((strm), (windowBits), ZLIB_VERSION, \
+                      (int)sizeof(z_stream))
 #define inflateBackInit(strm, windowBits, window) \
        inflateBackInit_((strm), (windowBits), (window), \
-                                            ZLIB_VERSION, sizeof(z_stream))
+                      ZLIB_VERSION, (int)sizeof(z_stream))

-#if _LARGEFILE64_SOURCE == 1 && _LFS64_LARGEFILE == 1
+/* provide 64-bit offset functions if _LARGEFILE64_SOURCE defined, and/or
+ * change the regular functions to 64 bits if _FILE_OFFSET_BITS is 64 (if
+ * both are true, the application gets the *64 functions, and the regular
+ * functions are changed to 64 bits) -- in case these are set on systems
+ * without large file support, _LFS64_LARGEFILE must also be true
+ */
+#if defined(_LARGEFILE64_SOURCE) && _LFS64_LARGEFILE-0
   ZEXTERN gzFile ZEXPORT gzopen64 OF((const char *, const char *));
-   ZEXTERN off64_t ZEXPORT gzseek64 OF((gzFile, off64_t, int));
-   ZEXTERN off64_t ZEXPORT gztell64 OF((gzFile));
-   ZEXTERN off64_t ZEXPORT gzoffset64 OF((gzFile));
-   ZEXTERN uLong ZEXPORT adler32_combine64 OF((uLong, uLong, off64_t));
-   ZEXTERN uLong ZEXPORT crc32_combine64 OF((uLong, uLong, off64_t));
+   ZEXTERN z_off64_t ZEXPORT gzseek64 OF((gzFile, z_off64_t, int));
+   ZEXTERN z_off64_t ZEXPORT gztell64 OF((gzFile));
+   ZEXTERN z_off64_t ZEXPORT gzoffset64 OF((gzFile));
+   ZEXTERN uLong ZEXPORT adler32_combine64 OF((uLong, uLong, z_off64_t));
+   ZEXTERN uLong ZEXPORT crc32_combine64 OF((uLong, uLong, z_off64_t));
 #endif

-#if !defined(ZLIB_INTERNAL) && _FILE_OFFSET_BITS == 64 && _LFS64_LARGEFILE == 1
-#  define gzopen gzopen64
-#  define gzseek gzseek64
-#  define gztell gztell64
-#  define gzoffset gzoffset64
-#  define adler32_combine adler32_combine64
-#  define crc32_combine crc32_combine64
-#  if _LARGEFILE64_SOURCE != 1
+#if !defined(ZLIB_INTERNAL) && _FILE_OFFSET_BITS-0 == 64 && _LFS64_LARGEFILE-0
+#  ifdef Z_PREFIX_SET
+#    define z_gzopen z_gzopen64
+#    define z_gzseek z_gzseek64
+#    define z_gztell z_gztell64
+#    define z_gzoffset z_gzoffset64
+#    define z_adler32_combine z_adler32_combine64
+#    define z_crc32_combine z_crc32_combine64
+#  else
+#    define gzopen gzopen64
+#    define gzseek gzseek64
+#    define gztell gztell64
+#    define gzoffset gzoffset64
+#    define adler32_combine adler32_combine64
+#    define crc32_combine crc32_combine64
+#  endif
+#  ifndef _LARGEFILE64_SOURCE
     ZEXTERN gzFile ZEXPORT gzopen64 OF((const char *, const char *));
-     ZEXTERN off_t ZEXPORT gzseek64 OF((gzFile, off_t, int));
-     ZEXTERN off_t ZEXPORT gztell64 OF((gzFile));
-     ZEXTERN off_t ZEXPORT gzoffset64 OF((gzFile));
-     ZEXTERN uLong ZEXPORT adler32_combine64 OF((uLong, uLong, off_t));
-     ZEXTERN uLong ZEXPORT crc32_combine64 OF((uLong, uLong, off_t));
+     ZEXTERN z_off_t ZEXPORT gzseek64 OF((gzFile, z_off_t, int));
+     ZEXTERN z_off_t ZEXPORT gztell64 OF((gzFile));
+     ZEXTERN z_off_t ZEXPORT gzoffset64 OF((gzFile));
+     ZEXTERN uLong ZEXPORT adler32_combine64 OF((uLong, uLong, z_off_t));
+     ZEXTERN uLong ZEXPORT crc32_combine64 OF((uLong, uLong, z_off_t));
 #  endif
 #else
   ZEXTERN gzFile ZEXPORT gzopen OF((const char *, const char *));
@@ -1589,10 +1631,12 @@ ZEXTERN int ZEXPORT inflateBackInit_ OF((z_streamp strm, int windowBits,
   ZEXTERN uLong ZEXPORT crc32_combine OF((uLong, uLong, z_off_t));
 #endif

+/* hack for buggy compilers */
 #if !defined(ZUTIL_H) && !defined(NO_DUMMY_DECL)
-    struct internal_state {int dummy;}; /* hack for buggy compilers */
+    struct internal_state {int dummy;};
 #endif

+/* undocumented functions */
 ZEXTERN const char   * ZEXPORT zError           OF((int));
 ZEXTERN int            ZEXPORT inflateSyncPoint OF((z_streamp));
 ZEXTERN const uLongf * ZEXPORT get_crc_table    OF((void));
--- a/zlib.map
+++ b/zlib.map
@@ -66,3 +66,7 @@ ZLIB_1.2.3.5 {
    gzclose_r;
    gzclose_w;
 } ZLIB_1.2.3.4;
+
+ZLIB_1.2.5.1 {
+    deflatePending;
+} ZLIB_1.2.5;
--- a/zlib.pc.in
+++ b/zlib.pc.in
@@ -1,6 +1,7 @@
 prefix=@prefix@
 exec_prefix=@exec_prefix@
 libdir=@libdir@
+sharedlibdir=@sharedlibdir@
 includedir=@includedir@

 Name: zlib
@@ -8,5 +9,5 @@ Description: zlib compression library
 Version: @VERSION@

 Requires:
-Libs: -L${libdir} -lz
+Libs: -L${libdir} -L${sharedlibdir} -lz
 Cflags: -I${includedir}
--- a/zutil.c
+++ b/zutil.c
@@ -1,5 +1,5 @@
 /* zutil.c -- target dependent utility functions for the compression library
- * Copyright (C) 1995-2005 Jean-loup Gailly.
+ * Copyright (C) 1995-2005, 2010, 2011 Jean-loup Gailly.
 * For conditions of distribution and use, see copyright notice in zlib.h
 */

@@ -85,7 +85,7 @@ uLong ZEXPORT zlibCompileFlags()
 #ifdef FASTEST
    flags += 1L << 21;
 #endif
-#ifdef STDC
+#if defined(STDC) || defined(Z_HAVE_STDARG_H)
 #  ifdef NO_vsnprintf
        flags += 1L << 25;
 #    ifdef HAS_vsprintf_void
@@ -117,9 +117,9 @@ uLong ZEXPORT zlibCompileFlags()
 #  ifndef verbose
 #    define verbose 0
 #  endif
-int z_verbose = verbose;
+int ZLIB_INTERNAL z_verbose = verbose;

-void z_error (m)
+void ZLIB_INTERNAL z_error (m)
    char *m;
 {
    fprintf(stderr, "%s\n", m);
@@ -146,7 +146,7 @@ const char * ZEXPORT zError(err)

 #ifndef HAVE_MEMCPY

-void zmemcpy(dest, source, len)
+void ZLIB_INTERNAL zmemcpy(dest, source, len)
    Bytef* dest;
    const Bytef* source;
    uInt  len;
@@ -157,7 +157,7 @@ void zmemcpy(dest, source, len)
    } while (--len != 0);
 }

-int zmemcmp(s1, s2, len)
+int ZLIB_INTERNAL zmemcmp(s1, s2, len)
    const Bytef* s1;
    const Bytef* s2;
    uInt  len;
@@ -170,7 +170,7 @@ int zmemcmp(s1, s2, len)
    return 0;
 }

-void zmemzero(dest, len)
+void ZLIB_INTERNAL zmemzero(dest, len)
    Bytef* dest;
    uInt  len;
 {
@@ -213,7 +213,7 @@ local ptr_table table[MAX_PTR];
 * a protected system like OS/2. Use Microsoft C instead.
 */

-voidpf zcalloc (voidpf opaque, unsigned items, unsigned size)
+voidpf ZLIB_INTERNAL zcalloc (voidpf opaque, unsigned items, unsigned size)
 {
    voidpf buf = opaque; /* just to make some compilers happy */
    ulg bsize = (ulg)items*size;
@@ -237,7 +237,7 @@ voidpf zcalloc (voidpf opaque, unsigned items, unsigned size)
    return buf;
 }

-void  zcfree (voidpf opaque, voidpf ptr)
+void ZLIB_INTERNAL zcfree (voidpf opaque, voidpf ptr)
 {
    int n;
    if (*(ush*)&ptr != 0) { /* object < 64K */
@@ -272,13 +272,13 @@ void  zcfree (voidpf opaque, voidpf ptr)
 #  define _hfree   hfree
 #endif

-voidpf zcalloc (voidpf opaque, uInt items, uInt size)
+voidpf ZLIB_INTERNAL zcalloc (voidpf opaque, uInt items, uInt size)
 {
    if (opaque) opaque = 0; /* to make compiler happy */
    return _halloc((long)items, size);
 }

-void  zcfree (voidpf opaque, voidpf ptr)
+void ZLIB_INTERNAL zcfree (voidpf opaque, voidpf ptr)
 {
    if (opaque) opaque = 0; /* to make compiler happy */
    _hfree(ptr);
@@ -297,7 +297,7 @@ extern voidp  calloc OF((uInt items, uInt size));
 extern void   free   OF((voidpf ptr));
 #endif

-voidpf zcalloc (opaque, items, size)
+voidpf ZLIB_INTERNAL zcalloc (opaque, items, size)
    voidpf opaque;
    unsigned items;
    unsigned size;
@@ -307,7 +307,7 @@ voidpf zcalloc (opaque, items, size)
                              (voidpf)calloc(items, size);
 }

-void  zcfree (opaque, ptr)
+void ZLIB_INTERNAL zcfree (opaque, ptr)
    voidpf opaque;
    voidpf ptr;
 {
--- a/zutil.h
+++ b/zutil.h
@@ -13,7 +13,12 @@
 #ifndef ZUTIL_H
 #define ZUTIL_H

-#define ZLIB_INTERNAL
+#if ((__GNUC__-0) * 10 + __GNUC_MINOR__-0 >= 33) && !defined(NO_VIZ)
+#  define ZLIB_INTERNAL __attribute__((visibility ("hidden")))
+#else
+#  define ZLIB_INTERNAL
+#endif
+
 #include "zlib.h"

 #ifdef STDC
@@ -154,20 +159,10 @@ extern const char * const z_errmsg[10]; /* indexed by 2-zlib_error */
  #pragma warn -8066
 #endif

-#if _LARGEFILE64_SOURCE == 1 && _LFS64_LARGEFILE == 1
-#  define z_off64_t off64_t
-#else
-#  define z_off64_t z_off_t
-#endif
-
 /* provide prototypes for these when building zlib without LFS */
-#if _LARGEFILE64_SOURCE != 1 || _LFS64_LARGEFILE != 1
-    ZEXTERN gzFile ZEXPORT gzopen64 OF((const char *, const char *));
-    ZEXTERN off_t ZEXPORT gzseek64 OF((gzFile, off_t, int));
-    ZEXTERN off_t ZEXPORT gztell64 OF((gzFile));
-    ZEXTERN off_t ZEXPORT gzoffset64 OF((gzFile));
-    ZEXTERN uLong ZEXPORT adler32_combine64 OF((uLong, uLong, off_t));
-    ZEXTERN uLong ZEXPORT crc32_combine64 OF((uLong, uLong, off_t));
+#if !defined(_LARGEFILE64_SOURCE) || _LFS64_LARGEFILE-0 == 0
+    ZEXTERN uLong ZEXPORT adler32_combine64 OF((uLong, uLong, z_off_t));
+    ZEXTERN uLong ZEXPORT crc32_combine64 OF((uLong, uLong, z_off_t));
 #endif

        /* common defaults */
@@ -241,16 +236,16 @@ extern const char * const z_errmsg[10]; /* indexed by 2-zlib_error */
 #    define zmemzero(dest, len) memset(dest, 0, len)
 #  endif
 #else
-   extern void zmemcpy  OF((Bytef* dest, const Bytef* source, uInt len));
-   extern int  zmemcmp  OF((const Bytef* s1, const Bytef* s2, uInt len));
-   extern void zmemzero OF((Bytef* dest, uInt len));
+   void ZLIB_INTERNAL zmemcpy OF((Bytef* dest, const Bytef* source, uInt len));
+   int ZLIB_INTERNAL zmemcmp OF((const Bytef* s1, const Bytef* s2, uInt len));
+   void ZLIB_INTERNAL zmemzero OF((Bytef* dest, uInt len));
 #endif

 /* Diagnostic functions */
 #ifdef DEBUG
 #  include <stdio.h>
-   extern int z_verbose;
-   extern void z_error    OF((char *m));
+   extern int ZLIB_INTERNAL z_verbose;
+   extern void ZLIB_INTERNAL z_error OF((char *m));
 #  define Assert(cond,msg) {if(!(cond)) z_error(msg);}
 #  define Trace(x) {if (z_verbose>=0) fprintf x ;}
 #  define Tracev(x) {if (z_verbose>0) fprintf x ;}
@@ -267,8 +262,9 @@ extern const char * const z_errmsg[10]; /* indexed by 2-zlib_error */
 #endif


-voidpf zcalloc OF((voidpf opaque, unsigned items, unsigned size));
-void   zcfree  OF((voidpf opaque, voidpf ptr));
+voidpf ZLIB_INTERNAL zcalloc OF((voidpf opaque, unsigned items,
+                        unsigned size));
+void ZLIB_INTERNAL zcfree  OF((voidpf opaque, voidpf ptr));

 #define ZALLOC(strm, items, size) \
           (*((strm)->zalloc))((strm)->opaque, (items), (size))
Author	SHA1	Message	Date
Mark Adler	10daf0d4d7	zlib 1.2.5.1	2011-09-11 11:04:49 -07:00
Mark Adler	9712272c78	zlib 1.2.5	2011-09-09 23:35:10 -07:00
Mark Adler	7301420248	zlib 1.2.4.5	2011-09-09 23:34:55 -07:00
Mark Adler	a7d70663cf	zlib 1.2.4.4	2011-09-09 23:34:45 -07:00
Mark Adler	f4498bea28	zlib 1.2.4.3	2011-09-09 23:34:38 -07:00
Mark Adler	7147f24cd7	zlib 1.2.4.2	2011-09-09 23:34:30 -07:00