zlib 1.2.5.1

CMakeLists.txt

@@ -20,7 +20,7 @@ check_include_file(stddef.h    HAVE_STDDEF_H)
 #
 # Check to see if we have large file support
 #
-set(CMAKE_REQUIRED_DEFINITIONS -D_LARGEFILE64_SOURCE)
+set(CMAKE_REQUIRED_DEFINITIONS -D_LARGEFILE64_SOURCE=1)
 # We add these other definitions here because CheckTypeSize.cmake
 # in CMake 2.4.x does not automatically do so and we want
 # compatibility with CMake 2.4.x.
@@ -35,7 +35,7 @@ if(HAVE_STDDEF_H)
 endif()
 check_type_size(off64_t OFF64_T)
 if(HAVE_OFF64_T)
-   add_definitions(-D_LARGEFILE64_SOURCE)
+   add_definitions(-D_LARGEFILE64_SOURCE=1)
 endif()
 set(CMAKE_REQUIRED_DEFINITIONS) # clear variable
 
@@ -50,22 +50,7 @@ endif()
 #
 # Check for unistd.h
 #
-check_include_file(unistd.h HAVE_UNISTD_H)
+check_include_file(unistd.h Z_HAVE_UNISTD_H)
-
-#
-# Check for errno.h
-check_include_file(errno.h HAVE_ERRNO_H)
-if(NOT HAVE_ERRNO_H)
-   add_definitions(-DNO_ERRNO_H)
-endif()
-
-#
-# Create the zlibdefs.h file.
-# Note: we create it in CMAKE_CURRENT_SOURCE_DIR instead 
-#       of CMAKE_CURRENT_BINARY_DIR because an empty zlibdefs.h
-#       is shipped with zlib in the source tree.
-configure_file(${CMAKE_CURRENT_SOURCE_DIR}/zlibdefs.h.cmakein
-               ${CMAKE_CURRENT_SOURCE_DIR}/zlibdefs.h)
 
 if(MSVC)
     set(CMAKE_DEBUG_POSTFIX "d")
@@ -73,14 +58,30 @@ if(MSVC)
     add_definitions(-D_CRT_NONSTDC_NO_DEPRECATE)
 endif()
 
+if(NOT CMAKE_CURRENT_SOURCE_DIR STREQUAL CMAKE_CURRENT_BINARY_DIR)
+    # If we're doing an out of source build and the user has a zconf.h
+    # in their source tree...
+    if(EXISTS ${CMAKE_CURRENT_SOURCE_DIR}/zconf.h)
+        message(FATAL_ERROR
+            "You must remove ${CMAKE_CURRENT_SOURCE_DIR}/zconf.h "
+            "from the source tree.  This file is included with zlib "
+            "but CMake generates this file for you automatically "
+            "in the build directory.")
+  endif()
+endif()
+
+configure_file(${CMAKE_CURRENT_SOURCE_DIR}/zconf.h.cmakein
+               ${CMAKE_CURRENT_BINARY_DIR}/zconf.h @ONLY)
+include_directories(${CMAKE_CURRENT_BINARY_DIR})
+
+
 #============================================================================
 # zlib
 #============================================================================
 
 set(ZLIB_PUBLIC_HDRS
-    zconf.h
+    ${CMAKE_CURRENT_BINARY_DIR}/zconf.h
     zlib.h
-    zlibdefs.h
 )
 set(ZLIB_PRIVATE_HDRS
     crc32.h
@@ -99,7 +100,6 @@ set(ZLIB_SRCS
     crc32.c
     deflate.c
     gzclose.c
-    gzio.c
     gzlib.c
     gzread.c
     gzwrite.c
@@ -124,6 +124,7 @@ if(MINGW)
                        COMMAND windres.exe
                             -D GCC_WINDRES
                             -I ${CMAKE_CURRENT_SOURCE_DIR}
+                            -I ${CMAKE_CURRENT_BINARY_DIR}
                             -o ${CMAKE_CURRENT_BINARY_DIR}/zlib1rc.obj
                             -i ${CMAKE_CURRENT_SOURCE_DIR}/win32/zlib1.rc)
     set(ZLIB_SRCS ${ZLIB_SRCS} ${CMAKE_CURRENT_BINARY_DIR}/zlib1rc.obj)

ChangeLog

@@ -1,6 +1,217 @@
 
                 ChangeLog file for zlib
 
+Changes in 1.2.5.1 (10 Sep 2011)
+- Update FAQ entry on shared builds (#13)
+- Avoid symbolic argument to chmod in Makefile.in
+- Fix bug and add consts in contrib/puff [Oberhumer]
+- Update contrib/puff/zeros.raw test file to have all block types
+- Add full coverage test for puff in contrib/puff/Makefile
+- Fix static-only-build install in Makefile.in
+- Fix bug in unzGetCurrentFileInfo() in contrib/minizip [Kuno]
+- Add libz.a dependency to shared in Makefile.in for parallel builds
+- Spell out "number" (instead of "nb") in zlib.h for total_in, total_out
+- Replace $(...) with `...` in configure for non-bash sh [Bowler]
+- Add darwin* to Darwin* and solaris* to SunOS\ 5* in configure [Groffen]
+- Add solaris* to Linux* in configure to allow gcc use [Groffen]
+- Add *bsd* to Linux* case in configure [Bar-Lev]
+- Add inffast.obj to dependencies in win32/Makefile.msc
+- Correct spelling error in deflate.h [Kohler]
+- Change libzdll.a again to libz.dll.a (!) in win32/Makefile.gcc
+- Add test to configure for GNU C looking for gcc in output of $cc -v
+- Add zlib.pc generation to win32/Makefile.gcc [Weigelt]
+- Fix bug in zlib.h for _FILE_OFFSET_BITS set and _LARGEFILE64_SOURCE not
+- Add comment in zlib.h that adler32_combine with len2 < 0 makes no sense
+- Make NO_DIVIDE option in adler32.c much faster (thanks to John Reiser)
+- Make stronger test in zconf.h to include unistd.h for LFS
+- Apply Darwin patches for 64-bit file offsets to contrib/minizip [Slack]
+- Fix zlib.h LFS support when Z_PREFIX used
+- Add updated as400 support (removed from old) [Monnerat]
+- Avoid deflate sensitivity to volatile input data
+- Avoid division in adler32_combine for NO_DIVIDE
+- Clarify the use of Z_FINISH with deflateBound() amount of space
+- Set binary for output file in puff.c
+- Use u4 type for crc_table to avoid conversion warnings
+- Apply casts in zlib.h to avoid conversion warnings
+- Add OF to prototypes for adler32_combine_ and crc32_combine_ [Miller]
+- Improve inflateSync() documentation to note indeterminancy
+- Add deflatePending() function to return the amount of pending output
+- Correct the spelling of "specification" in FAQ [Randers-Pehrson]
+- Add a check in configure for stdarg.h, use for gzprintf()
+- Check that pointers fit in ints when gzprint() compiled old style
+- Add dummy name before $(SHAREDLIBV) in Makefile [Bar-Lev, Bowler]
+- Delete line in configure that adds -L. libz.a to LDFLAGS [Weigelt]
+- Add debug records in assmebler code [Londer]
+- Update RFC references to use http://tools.ietf.org/html/... [Li]
+- Add --archs option, use of libtool to configure for Mac OS X [Borstel]
+
+Changes in 1.2.5 (19 Apr 2010)
+- Disable visibility attribute in win32/Makefile.gcc [Bar-Lev]
+- Default to libdir as sharedlibdir in configure [Nieder]
+- Update copyright dates on modified source files
+- Update trees.c to be able to generate modified trees.h
+- Exit configure for MinGW, suggesting win32/Makefile.gcc
+- Check for NULL path in gz_open [Homurlu]
+
+Changes in 1.2.4.5 (18 Apr 2010)
+- Set sharedlibdir in configure [Torok]
+- Set LDFLAGS in Makefile.in [Bar-Lev]
+- Avoid mkdir objs race condition in Makefile.in [Bowler]
+- Add ZLIB_INTERNAL in front of internal inter-module functions and arrays
+- Define ZLIB_INTERNAL to hide internal functions and arrays for GNU C
+- Don't use hidden attribute when it is a warning generator (e.g. Solaris)
+
+Changes in 1.2.4.4 (18 Apr 2010)
+- Fix CROSS_PREFIX executable testing, CHOST extract, mingw* [Torok]
+- Undefine _LARGEFILE64_SOURCE in zconf.h if it is zero, but not if empty
+- Try to use bash or ksh regardless of functionality of /bin/sh
+- Fix configure incompatibility with NetBSD sh
+- Remove attempt to run under bash or ksh since have better NetBSD fix
+- Fix win32/Makefile.gcc for MinGW [Bar-Lev]
+- Add diagnostic messages when using CROSS_PREFIX in configure
+- Added --sharedlibdir option to configure [Weigelt]
+- Use hidden visibility attribute when available [Frysinger]
+
+Changes in 1.2.4.3 (10 Apr 2010)
+- Only use CROSS_PREFIX in configure for ar and ranlib if they exist
+- Use CROSS_PREFIX for nm [Bar-Lev]
+- Assume _LARGEFILE64_SOURCE defined is equivalent to true
+- Avoid use of undefined symbols in #if with && and ||
+- Make *64 prototypes in gzguts.h consistent with functions
+- Add -shared load option for MinGW in configure [Bowler]
+- Move z_off64_t to public interface, use instead of off64_t
+- Remove ! from shell test in configure (not portable to Solaris)
+- Change +0 macro tests to -0 for possibly increased portability
+
+Changes in 1.2.4.2 (9 Apr 2010)
+- Add consistent carriage returns to readme.txt's in masmx86 and masmx64
+- Really provide prototypes for *64 functions when building without LFS
+- Only define unlink() in minigzip.c if unistd.h not included
+- Update README to point to contrib/vstudio project files
+- Move projects/vc6 to old/ and remove projects/
+- Include stdlib.h in minigzip.c for setmode() definition under WinCE
+- Clean up assembler builds in win32/Makefile.msc [Rowe]
+- Include sys/types.h for Microsoft for off_t definition
+- Fix memory leak on error in gz_open()
+- Symbolize nm as $NM in configure [Weigelt]
+- Use TEST_LDSHARED instead of LDSHARED to link test programs [Weigelt]
+- Add +0 to _FILE_OFFSET_BITS and _LFS64_LARGEFILE in case not defined
+- Fix bug in gzeof() to take into account unused input data
+- Avoid initialization of structures with variables in puff.c
+- Updated win32/README-WIN32.txt [Rowe]
+
+Changes in 1.2.4.1 (28 Mar 2010)
+- Remove the use of [a-z] constructs for sed in configure [gentoo 310225]
+- Remove $(SHAREDLIB) from LIBS in Makefile.in [Creech]
+- Restore "for debugging" comment on sprintf() in gzlib.c
+- Remove fdopen for MVS from gzguts.h
+- Put new README-WIN32.txt in win32 [Rowe]
+- Add check for shell to configure and invoke another shell if needed
+- Fix big fat stinking bug in gzseek() on uncompressed files
+- Remove vestigial F_OPEN64 define in zutil.h
+- Set and check the value of _LARGEFILE_SOURCE and _LARGEFILE64_SOURCE
+- Avoid errors on non-LFS systems when applications define LFS macros
+- Set EXE to ".exe" in configure for MINGW [Kahle]
+- Match crc32() in crc32.c exactly to the prototype in zlib.h [Sherrill]
+- Add prefix for cross-compilation in win32/makefile.gcc [Bar-Lev]
+- Add DLL install in win32/makefile.gcc [Bar-Lev]
+- Allow Linux* or linux* from uname in configure [Bar-Lev]
+- Allow ldconfig to be redefined in configure and Makefile.in [Bar-Lev]
+- Add cross-compilation prefixes to configure [Bar-Lev]
+- Match type exactly in gz_load() invocation in gzread.c
+- Match type exactly of zcalloc() in zutil.c to zlib.h alloc_func
+- Provide prototypes for *64 functions when building zlib without LFS
+- Don't use -lc when linking shared library on MinGW
+- Remove errno.h check in configure and vestigial errno code in zutil.h
+
+Changes in 1.2.4 (14 Mar 2010)
+- Fix VER3 extraction in configure for no fourth subversion
+- Update zlib.3, add docs to Makefile.in to make .pdf out of it
+- Add zlib.3.pdf to distribution
+- Don't set error code in gzerror() if passed pointer is NULL
+- Apply destination directory fixes to CMakeLists.txt [Lowman]
+- Move #cmakedefine's to a new zconf.in.cmakein
+- Restore zconf.h for builds that don't use configure or cmake
+- Add distclean to dummy Makefile for convenience
+- Update and improve INDEX, README, and FAQ
+- Update CMakeLists.txt for the return of zconf.h [Lowman]
+- Update contrib/vstudio/vc9 and vc10 [Vollant]
+- Change libz.dll.a back to libzdll.a in win32/Makefile.gcc
+- Apply license and readme changes to contrib/asm686 [Raiter]
+- Check file name lengths and add -c option in minigzip.c [Li]
+- Update contrib/amd64 and contrib/masmx86/ [Vollant]
+- Avoid use of "eof" parameter in trees.c to not shadow library variable
+- Update make_vms.com for removal of zlibdefs.h [Zinser]
+- Update assembler code and vstudio projects in contrib [Vollant]
+- Remove outdated assembler code contrib/masm686 and contrib/asm586
+- Remove old vc7 and vc8 from contrib/vstudio
+- Update win32/Makefile.msc, add ZLIB_VER_SUBREVISION [Rowe]
+- Fix memory leaks in gzclose_r() and gzclose_w(), file leak in gz_open()
+- Add contrib/gcc_gvmat64 for longest_match and inflate_fast [Vollant]
+- Remove *64 functions from win32/zlib.def (they're not 64-bit yet)
+- Fix bug in void-returning vsprintf() case in gzwrite.c
+- Fix name change from inflate.h in contrib/inflate86/inffas86.c
+- Check if temporary file exists before removing in make_vms.com [Zinser]
+- Fix make install and uninstall for --static option
+- Fix usage of _MSC_VER in gzguts.h and zutil.h [Truta]
+- Update readme.txt in contrib/masmx64 and masmx86 to assemble
+
+Changes in 1.2.3.9 (21 Feb 2010)
+- Expunge gzio.c
+- Move as400 build information to old
+- Fix updates in contrib/minizip and contrib/vstudio
+- Add const to vsnprintf test in configure to avoid warnings [Weigelt]
+- Delete zconf.h (made by configure) [Weigelt]
+- Change zconf.in.h to zconf.h.in per convention [Weigelt]
+- Check for NULL buf in gzgets()
+- Return empty string for gzgets() with len == 1 (like fgets())
+- Fix description of gzgets() in zlib.h for end-of-file, NULL return
+- Update minizip to 1.1 [Vollant]
+- Avoid MSVC loss of data warnings in gzread.c, gzwrite.c
+- Note in zlib.h that gzerror() should be used to distinguish from EOF
+- Remove use of snprintf() from gzlib.c
+- Fix bug in gzseek()
+- Update contrib/vstudio, adding vc9 and vc10 [Kuno, Vollant]
+- Fix zconf.h generation in CMakeLists.txt [Lowman]
+- Improve comments in zconf.h where modified by configure
+
+Changes in 1.2.3.8 (13 Feb 2010)
+- Clean up text files (tabs, trailing whitespace, etc.) [Oberhumer]
+- Use z_off64_t in gz_zero() and gz_skip() to match state->skip
+- Avoid comparison problem when sizeof(int) == sizeof(z_off64_t)
+- Revert to Makefile.in from 1.2.3.6 (live with the clutter)
+- Fix missing error return in gzflush(), add zlib.h note
+- Add *64 functions to zlib.map [Levin]
+- Fix signed/unsigned comparison in gz_comp()
+- Use SFLAGS when testing shared linking in configure
+- Add --64 option to ./configure to use -m64 with gcc
+- Fix ./configure --help to correctly name options
+- Have make fail if a test fails [Levin]
+- Avoid buffer overrun in contrib/masmx64/gvmat64.asm [Simpson]
+- Remove assembler object files from contrib
+
+Changes in 1.2.3.7 (24 Jan 2010)
+- Always gzopen() with O_LARGEFILE if available
+- Fix gzdirect() to work immediately after gzopen() or gzdopen()
+- Make gzdirect() more precise when the state changes while reading
+- Improve zlib.h documentation in many places
+- Catch memory allocation failure in gz_open()
+- Complete close operation if seek forward in gzclose_w() fails
+- Return Z_ERRNO from gzclose_r() if close() fails
+- Return Z_STREAM_ERROR instead of EOF for gzclose() being passed NULL
+- Return zero for gzwrite() errors to match zlib.h description
+- Return -1 on gzputs() error to match zlib.h description
+- Add zconf.in.h to allow recovery from configure modification [Weigelt]
+- Fix static library permissions in Makefile.in [Weigelt]
+- Avoid warnings in configure tests that hide functionality [Weigelt]
+- Add *BSD and DragonFly to Linux case in configure [gentoo 123571]
+- Change libzdll.a to libz.dll.a in win32/Makefile.gcc [gentoo 288212]
+- Avoid access of uninitialized data for first inflateReset2 call [Gomes]
+- Keep object files in subdirectories to reduce the clutter somewhat
+- Remove default Makefile and zlibdefs.h, add dummy Makefile
+- Add new external functions to Z_PREFIX, remove duplicates, z_z_ -> z_
+- Remove zlibdefs.h completely -- modify zconf.h instead
+
 Changes in 1.2.3.6 (17 Jan 2010)
 - Avoid void * arithmetic in gzread.c and gzwrite.c
 - Make compilers happier with const char * for gz_error message
@@ -11,7 +222,7 @@ Changes in 1.2.3.6 (17 Jan 2010)
 - Correct email address in configure for system options
 - Update make_vms.com and add make_vms.com to contrib/minizip [Zinser]
 - Update zlib.map [Brown]
-- Fix Makefile.in for Solaris 10 make of example64 and minizip64 [T<EFBFBD>r<EFBFBD>k]
+- Fix Makefile.in for Solaris 10 make of example64 and minizip64 [Torok]
 - Apply various fixes to CMakeLists.txt [Lowman]
 - Add checks on len in gzread() and gzwrite()
 - Add error message for no more room for gzungetc()
@@ -95,7 +306,7 @@ Changes in 1.2.3.4 (21 Dec 2009)
 - Clear bytes after deflate lookahead to avoid use of uninitialized data
 - Change a limit in inftrees.c to be more transparent to Coverity Prevent
 - Update win32/zlib.def with exported symbols from zlib.h
-- Correct spelling error in zlib.h [Willem]
+- Correct spelling errors in zlib.h [Willem, Sobrado]
 - Allow Z_BLOCK for deflate() to force a new block
 - Allow negative bits in inflatePrime() to delete existing bit buffer
 - Add Z_TREES flush option to inflate() to return at end of trees
@@ -169,7 +380,7 @@ Changes in 1.2.3.1 (16 August 2006)
 - Synchronize FAQ with website
 - Fix compressBound(), was low for some pathological cases [Fearnley]
 - Take into account wrapper variations in deflateBound()
-- Set examples/zpipe.c input and output to binary mode for Windows 
+- Set examples/zpipe.c input and output to binary mode for Windows
 - Update examples/zlib_how.html with new zpipe.c (also web site)
 - Fix some warnings in examples/gzlog.c and examples/zran.c (it seems
   that gcc became pickier in 4.0)
@@ -200,7 +411,7 @@ Changes in 1.2.2.4 (11 July 2005)
   compile
 - Fix some spelling errors in comments [Betts]
 - Correct inflateInit2() error return documentation in zlib.h
-- Added zran.c example of compressed data random access to examples
+- Add zran.c example of compressed data random access to examples
   directory, shows use of inflatePrime()
 - Fix cast for assignments to strm->state in inflate.c and infback.c
 - Fix zlibCompileFlags() in zutil.c to use 1L for long shifts [Oberhumer]

FAQ

@@ -3,8 +3,8 @@
 
 
 If your question is not there, please check the zlib home page
-http://www.zlib.org which may have more recent information.
+http://zlib.net/ which may have more recent information.
-The lastest zlib FAQ is at http://www.gzip.org/zlib/zlib_faq.html
+The lastest zlib FAQ is at http://zlib.net/zlib_faq.html
 
 
  1. Is zlib Y2K-compliant?
@@ -13,54 +13,51 @@ The lastest zlib FAQ is at http://www.gzip.org/zlib/zlib_faq.html
 
  2. Where can I get a Windows DLL version?
 
-    The zlib sources can be compiled without change to produce a DLL.
+    The zlib sources can be compiled without change to produce a DLL.  See the
-    See the file win32/DLL_FAQ.txt in the zlib distribution.
+    file win32/DLL_FAQ.txt in the zlib distribution.  Pointers to the
-    Pointers to the precompiled DLL are found in the zlib web site at
+    precompiled DLL are found in the zlib web site at http://zlib.net/ .
-    http://www.zlib.org.
 
  3. Where can I get a Visual Basic interface to zlib?
 
     See
-        * http://www.dogma.net/markn/articles/zlibtool/zlibtool.htm
+        * http://marknelson.us/1997/01/01/zlib-engine/
-        * contrib/visual-basic.txt in the zlib distribution
         * win32/DLL_FAQ.txt in the zlib distribution
 
  4. compress() returns Z_BUF_ERROR.
 
-    Make sure that before the call of compress, the length of the compressed
+    Make sure that before the call of compress(), the length of the compressed
-    buffer is equal to the total size of the compressed buffer and not
+    buffer is equal to the available size of the compressed buffer and not
-    zero. For Visual Basic, check that this parameter is passed by reference
+    zero.  For Visual Basic, check that this parameter is passed by reference
     ("as any"), not by value ("as long").
 
  5. deflate() or inflate() returns Z_BUF_ERROR.
 
-    Before making the call, make sure that avail_in and avail_out are not
+    Before making the call, make sure that avail_in and avail_out are not zero.
-    zero. When setting the parameter flush equal to Z_FINISH, also make sure
+    When setting the parameter flush equal to Z_FINISH, also make sure that
-    that avail_out is big enough to allow processing all pending input.
+    avail_out is big enough to allow processing all pending input.  Note that a
-    Note that a Z_BUF_ERROR is not fatal--another call to deflate() or
+    Z_BUF_ERROR is not fatal--another call to deflate() or inflate() can be
-    inflate() can be made with more input or output space. A Z_BUF_ERROR
+    made with more input or output space.  A Z_BUF_ERROR may in fact be
-    may in fact be unavoidable depending on how the functions are used, since
+    unavoidable depending on how the functions are used, since it is not
-    it is not possible to tell whether or not there is more output pending
+    possible to tell whether or not there is more output pending when
-    when strm.avail_out returns with zero.
+    strm.avail_out returns with zero.  See http://zlib.net/zlib_how.html for a
+    heavily annotated example.
 
  6. Where's the zlib documentation (man pages, etc.)?
 
-    It's in zlib.h for the moment, and Francis S. Lin has converted it to a
+    It's in zlib.h .  Examples of zlib usage are in the files example.c and
-    web page zlib.html. Volunteers to transform this to Unix-style man pages,
+    minigzip.c, with more in examples/ .
-    please contact us (zlib@gzip.org). Examples of zlib usage are in the files
-    example.c and minigzip.c.
 
  7. Why don't you use GNU autoconf or libtool or ...?
 
-    Because we would like to keep zlib as a very small and simple
+    Because we would like to keep zlib as a very small and simple package.
-    package. zlib is rather portable and doesn't need much configuration.
+    zlib is rather portable and doesn't need much configuration.
 
  8. I found a bug in zlib.
 
-    Most of the time, such problems are due to an incorrect usage of
+    Most of the time, such problems are due to an incorrect usage of zlib.
-    zlib. Please try to reproduce the problem with a small program and send
+    Please try to reproduce the problem with a small program and send the
-    the corresponding source to us at zlib@gzip.org . Do not send
+    corresponding source to us at zlib@gzip.org .  Do not send multi-megabyte
-    multi-megabyte data files without prior agreement.
+    data files without prior agreement.
 
  9. Why do I get "undefined reference to gzputc"?
 
@@ -77,18 +74,20 @@ The lastest zlib FAQ is at http://www.gzip.org/zlib/zlib_faq.html
 
 11. Can zlib handle .zip archives?
 
-    Not by itself, no. See the directory contrib/minizip in the zlib
+    Not by itself, no.  See the directory contrib/minizip in the zlib
     distribution.
 
 12. Can zlib handle .Z files?
 
-    No, sorry. You have to spawn an uncompress or gunzip subprocess, or adapt
+    No, sorry.  You have to spawn an uncompress or gunzip subprocess, or adapt
     the code of uncompress on your own.
 
 13. How can I make a Unix shared library?
 
-    make clean
+    By default a shared (and a static) library is built for Unix.  So:
-    ./configure -s
+
+    make distclean
+    ./configure
     make
 
 14. How do I install a shared zlib library on Unix?
@@ -99,8 +98,10 @@ The lastest zlib FAQ is at http://www.gzip.org/zlib/zlib_faq.html
 
     However, many flavors of Unix come with a shared zlib already installed.
     Before going to the trouble of compiling a shared version of zlib and
-    trying to install it, you may want to check if it's already there! If you
+    trying to install it, you may want to check if it's already there!  If you
-    can #include <zlib.h>, it's there. The -lz option will probably link to it.
+    can #include <zlib.h>, it's there.  The -lz option will probably link to
+    it.  You can check the version at the top of zlib.h or with the
+    ZLIB_VERSION symbol defined in zlib.h .
 
 15. I have a question about OttoPDF.
 
@@ -109,8 +110,8 @@ The lastest zlib FAQ is at http://www.gzip.org/zlib/zlib_faq.html
 
 16. Can zlib decode Flate data in an Adobe PDF file?
 
-    Yes. See http://www.fastio.com/ (ClibPDF), or http://www.pdflib.com/ .
+    Yes. See http://www.pdflib.com/ . To modify PDF forms, see
-    To modify PDF forms, see http://sourceforge.net/projects/acroformtool/ .
+    http://sourceforge.net/projects/acroformtool/ .
 
 17. Why am I getting this "register_frame_info not found" error on Solaris?
 
@@ -121,67 +122,67 @@ The lastest zlib FAQ is at http://www.gzip.org/zlib/zlib_faq.html
         symbol __register_frame_info: referenced symbol not found
 
     The symbol __register_frame_info is not part of zlib, it is generated by
-    the C compiler (cc or gcc). You must recompile applications using zlib
+    the C compiler (cc or gcc).  You must recompile applications using zlib
-    which have this problem. This problem is specific to Solaris. See
+    which have this problem.  This problem is specific to Solaris.  See
     http://www.sunfreeware.com for Solaris versions of zlib and applications
     using zlib.
 
 18. Why does gzip give an error on a file I make with compress/deflate?
 
     The compress and deflate functions produce data in the zlib format, which
-    is different and incompatible with the gzip format. The gz* functions in
+    is different and incompatible with the gzip format.  The gz* functions in
-    zlib on the other hand use the gzip format. Both the zlib and gzip
+    zlib on the other hand use the gzip format.  Both the zlib and gzip formats
-    formats use the same compressed data format internally, but have different
+    use the same compressed data format internally, but have different headers
-    headers and trailers around the compressed data.
+    and trailers around the compressed data.
 
 19. Ok, so why are there two different formats?
 
-    The gzip format was designed to retain the directory information about
+    The gzip format was designed to retain the directory information about a
-    a single file, such as the name and last modification date. The zlib
+    single file, such as the name and last modification date.  The zlib format
-    format on the other hand was designed for in-memory and communication
+    on the other hand was designed for in-memory and communication channel
-    channel applications, and has a much more compact header and trailer and
+    applications, and has a much more compact header and trailer and uses a
-    uses a faster integrity check than gzip.
+    faster integrity check than gzip.
 
 20. Well that's nice, but how do I make a gzip file in memory?
 
     You can request that deflate write the gzip format instead of the zlib
-    format using deflateInit2(). You can also request that inflate decode
+    format using deflateInit2().  You can also request that inflate decode the
-    the gzip format using inflateInit2(). Read zlib.h for more details.
+    gzip format using inflateInit2().  Read zlib.h for more details.
 
 21. Is zlib thread-safe?
 
-    Yes. However any library routines that zlib uses and any application-
+    Yes.  However any library routines that zlib uses and any application-
-    provided memory allocation routines must also be thread-safe. zlib's gz*
+    provided memory allocation routines must also be thread-safe.  zlib's gz*
     functions use stdio library routines, and most of zlib's functions use the
-    library memory allocation routines by default. zlib's Init functions allow
+    library memory allocation routines by default.  zlib's *Init* functions
-    for the application to provide custom memory allocation routines.
+    allow for the application to provide custom memory allocation routines.
 
     Of course, you should only operate on any given zlib or gzip stream from a
     single thread at a time.
 
 22. Can I use zlib in my commercial application?
 
-    Yes. Please read the license in zlib.h.
+    Yes.  Please read the license in zlib.h.
 
 23. Is zlib under the GNU license?
 
-    No. Please read the license in zlib.h.
+    No.  Please read the license in zlib.h.
 
 24. The license says that altered source versions must be "plainly marked". So
     what exactly do I need to do to meet that requirement?
 
-    You need to change the ZLIB_VERSION and ZLIB_VERNUM #defines in zlib.h. In
+    You need to change the ZLIB_VERSION and ZLIB_VERNUM #defines in zlib.h.  In
     particular, the final version number needs to be changed to "f", and an
-    identification string should be appended to ZLIB_VERSION. Version numbers
+    identification string should be appended to ZLIB_VERSION.  Version numbers
     x.x.x.f are reserved for modifications to zlib by others than the zlib
-    maintainers. For example, if the version of the base zlib you are altering
+    maintainers.  For example, if the version of the base zlib you are altering
     is "1.2.3.4", then in zlib.h you should change ZLIB_VERNUM to 0x123f, and
-    ZLIB_VERSION to something like "1.2.3.f-zachary-mods-v3". You can also
+    ZLIB_VERSION to something like "1.2.3.f-zachary-mods-v3".  You can also
     update the version strings in deflate.c and inftrees.c.
 
     For altered source distributions, you should also note the origin and
     nature of the changes in zlib.h, as well as in ChangeLog and README, along
-    with the dates of the alterations. The origin should include at least your
+    with the dates of the alterations.  The origin should include at least your
     name (or your company's name), and an email address to contact for help or
     issues with the library.
 
@@ -197,111 +198,112 @@ The lastest zlib FAQ is at http://www.gzip.org/zlib/zlib_faq.html
 
 26. Will zlib work on a 64-bit machine?
 
-    It should. It has been tested on 64-bit machines, and has no dependence
+    Yes.  It has been tested on 64-bit machines, and has no dependence on any
-    on any data types being limited to 32-bits in length. If you have any
+    data types being limited to 32-bits in length.  If you have any
     difficulties, please provide a complete problem report to zlib@gzip.org
 
 27. Will zlib decompress data from the PKWare Data Compression Library?
 
-    No. The PKWare DCL uses a completely different compressed data format
+    No.  The PKWare DCL uses a completely different compressed data format than
-    than does PKZIP and zlib. However, you can look in zlib's contrib/blast
+    does PKZIP and zlib.  However, you can look in zlib's contrib/blast
     directory for a possible solution to your problem.
 
 28. Can I access data randomly in a compressed stream?
 
-    No, not without some preparation. If when compressing you periodically
+    No, not without some preparation.  If when compressing you periodically use
-    use Z_FULL_FLUSH, carefully write all the pending data at those points,
+    Z_FULL_FLUSH, carefully write all the pending data at those points, and
-    and keep an index of those locations, then you can start decompression
+    keep an index of those locations, then you can start decompression at those
-    at those points. You have to be careful to not use Z_FULL_FLUSH too
+    points.  You have to be careful to not use Z_FULL_FLUSH too often, since it
-    often, since it can significantly degrade compression.
+    can significantly degrade compression.  Alternatively, you can scan a
+    deflate stream once to generate an index, and then use that index for
+    random access.  See examples/zran.c .
 
 29. Does zlib work on MVS, OS/390, CICS, etc.?
 
-    Yes, there are working ports of zlib 1.1.4 to MVS which you can find
+    It has in the past, but we have not heard of any recent evidence.  There
-    here:
+    were working ports of zlib 1.1.4 to MVS, but those links no longer work.
+    If you know of recent, successful applications of zlib on these operating
+    systems, please let us know.  Thanks.
 
-    http://www.homerow.net/asm/zlib390.htm
+30. Is there some simpler, easier to read version of inflate I can look at to
-    http://www.homerow.net/asm/zlibLE.htm
+    understand the deflate format?
 
-    If these are updated to more recent versions of zlib, please let us
+    First off, you should read RFC 1951.  Second, yes.  Look in zlib's
-    know. Thanks.
-
-30. Is there some simpler, easier to read version of inflate I can look at
-    to understand the deflate format?
-
-    First off, you should read RFC 1951. Second, yes. Look in zlib's
     contrib/puff directory.
 
 31. Does zlib infringe on any patents?
 
-    As far as we know, no. In fact, that was originally the whole point behind
+    As far as we know, no.  In fact, that was originally the whole point behind
-    zlib. Look here for some more information:
+    zlib.  Look here for some more information:
 
     http://www.gzip.org/#faq11
 
 32. Can zlib work with greater than 4 GB of data?
 
-    Yes. inflate() and deflate() will process any amount of data correctly.
+    Yes.  inflate() and deflate() will process any amount of data correctly.
     Each call of inflate() or deflate() is limited to input and output chunks
     of the maximum value that can be stored in the compiler's "unsigned int"
-    type, but there is no limit to the number of chunks. Note however that the
+    type, but there is no limit to the number of chunks.  Note however that the
-    strm.total_in and strm_total_out counters may be limited to 4 GB. These
+    strm.total_in and strm_total_out counters may be limited to 4 GB.  These
     counters are provided as a convenience and are not used internally by
-    inflate() or deflate(). The application can easily set up its own counters
+    inflate() or deflate().  The application can easily set up its own counters
     updated after each call of inflate() or deflate() to count beyond 4 GB.
     compress() and uncompress() may be limited to 4 GB, since they operate in a
-    single call. gzseek() and gztell() may be limited to 4 GB depending on how
+    single call.  gzseek() and gztell() may be limited to 4 GB depending on how
-    zlib is compiled. See the zlibCompileFlags() function in zlib.h.
+    zlib is compiled.  See the zlibCompileFlags() function in zlib.h.
 
-    The word "may" appears several times above since there is a 4 GB limit
+    The word "may" appears several times above since there is a 4 GB limit only
-    only if the compiler's "long" type is 32 bits. If the compiler's "long"
+    if the compiler's "long" type is 32 bits.  If the compiler's "long" type is
-    type is 64 bits, then the limit is 16 exabytes.
+    64 bits, then the limit is 16 exabytes.
 
 33. Does zlib have any security vulnerabilities?
 
-    The only one that we are aware of is potentially in gzprintf(). If zlib
+    The only one that we are aware of is potentially in gzprintf().  If zlib is
-    is compiled to use sprintf() or vsprintf(), then there is no protection
+    compiled to use sprintf() or vsprintf(), then there is no protection
-    against a buffer overflow of a 4K string space, other than the caller of
+    against a buffer overflow of an 8K string space (or other value as set by
-    gzprintf() assuring that the output will not exceed 4K. On the other
+    gzbuffer()), other than the caller of gzprintf() assuring that the output
-    hand, if zlib is compiled to use snprintf() or vsnprintf(), which should
+    will not exceed 8K.  On the other hand, if zlib is compiled to use
-    normally be the case, then there is no vulnerability. The ./configure
+    snprintf() or vsnprintf(), which should normally be the case, then there is
-    script will display warnings if an insecure variation of sprintf() will
+    no vulnerability.  The ./configure script will display warnings if an
-    be used by gzprintf(). Also the zlibCompileFlags() function will return
+    insecure variation of sprintf() will be used by gzprintf().  Also the
-    information on what variant of sprintf() is used by gzprintf().
+    zlibCompileFlags() function will return information on what variant of
+    sprintf() is used by gzprintf().
 
     If you don't have snprintf() or vsnprintf() and would like one, you can
     find a portable implementation here:
 
         http://www.ijs.si/software/snprintf/
 
-    Note that you should be using the most recent version of zlib. Versions
+    Note that you should be using the most recent version of zlib.  Versions
-    1.1.3 and before were subject to a double-free vulnerability, and version
+    1.1.3 and before were subject to a double-free vulnerability, and versions
-    1.2.1 was subject to an access exception when decompressing invalid
+    1.2.1 and 1.2.2 were subject to an access exception when decompressing
-    compressed data.
+    invalid compressed data.
 
 34. Is there a Java version of zlib?
 
     Probably what you want is to use zlib in Java. zlib is already included
     as part of the Java SDK in the java.util.zip package. If you really want
     a version of zlib written in the Java language, look on the zlib home
-    page for links: http://www.zlib.org/
+    page for links: http://zlib.net/ .
 
 35. I get this or that compiler or source-code scanner warning when I crank it
     up to maximally-pedantic. Can't you guys write proper code?
 
     Many years ago, we gave up attempting to avoid warnings on every compiler
-    in the universe. It just got to be a waste of time, and some compilers
+    in the universe.  It just got to be a waste of time, and some compilers
-    were downright silly. So now, we simply make sure that the code always
+    were downright silly as well as contradicted each other.  So now, we simply
-    works.
+    make sure that the code always works.
 
 36. Valgrind (or some similar memory access checker) says that deflate is
     performing a conditional jump that depends on an uninitialized value.
     Isn't that a bug?
 
-    No. That is intentional for performance reasons, and the output of
+    No.  That is intentional for performance reasons, and the output of deflate
-    deflate is not affected. This only started showing up recently since
+    is not affected.  This only started showing up recently since zlib 1.2.x
-    zlib 1.2.x uses malloc() by default for allocations, whereas earlier
+    uses malloc() by default for allocations, whereas earlier versions used
-    versions used calloc(), which zeros out the allocated memory.
+    calloc(), which zeros out the allocated memory.  Even though the code was
+    correct, versions 1.2.4 and later was changed to not stimulate these
+    checkers.
 
 37. Will zlib read the (insert any ancient or arcane format here) compressed
     data format?
@@ -311,20 +313,21 @@ The lastest zlib FAQ is at http://www.gzip.org/zlib/zlib_faq.html
 
 38. How can I encrypt/decrypt zip files with zlib?
 
-    zlib doesn't support encryption. The original PKZIP encryption is very weak
+    zlib doesn't support encryption.  The original PKZIP encryption is very
-    and can be broken with freely available programs. To get strong encryption,
+    weak and can be broken with freely available programs.  To get strong
-    use GnuPG, http://www.gnupg.org/ , which already includes zlib compression.
+    encryption, use GnuPG, http://www.gnupg.org/ , which already includes zlib
-    For PKZIP compatible "encryption", look at http://www.info-zip.org/
+    compression.  For PKZIP compatible "encryption", look at
+    http://www.info-zip.org/
 
 39. What's the difference between the "gzip" and "deflate" HTTP 1.1 encodings?
 
-    "gzip" is the gzip format, and "deflate" is the zlib format. They should
+    "gzip" is the gzip format, and "deflate" is the zlib format.  They should
-    probably have called the second one "zlib" instead to avoid confusion
+    probably have called the second one "zlib" instead to avoid confusion with
-    with the raw deflate compressed data format. While the HTTP 1.1 RFC 2616
+    the raw deflate compressed data format.  While the HTTP 1.1 RFC 2616
     correctly points to the zlib specification in RFC 1950 for the "deflate"
     transfer encoding, there have been reports of servers and browsers that
     incorrectly produce or expect raw deflate data per the deflate
-    specficiation in RFC 1951, most notably Microsoft. So even though the
+    specification in RFC 1951, most notably Microsoft.  So even though the
     "deflate" transfer encoding using the zlib format would be the more
     efficient approach (and in fact exactly what the zlib format was designed
     for), using the "gzip" transfer encoding is probably more reliable due to
@@ -334,28 +337,32 @@ The lastest zlib FAQ is at http://www.gzip.org/zlib/zlib_faq.html
 
 40. Does zlib support the new "Deflate64" format introduced by PKWare?
 
-    No. PKWare has apparently decided to keep that format proprietary, since
+    No.  PKWare has apparently decided to keep that format proprietary, since
-    they have not documented it as they have previous compression formats.
+    they have not documented it as they have previous compression formats.  In
-    In any case, the compression improvements are so modest compared to other
+    any case, the compression improvements are so modest compared to other more
-    more modern approaches, that it's not worth the effort to implement.
+    modern approaches, that it's not worth the effort to implement.
 
 41. I'm having a problem with the zip functions in zlib, can you help?
 
-    There are no zip functions in zlib. You are probably using minizip by
+    There are no zip functions in zlib.  You are probably using minizip by
-    Giles Vollant, which is found in the contrib directory of zlib. It is not
+    Giles Vollant, which is found in the contrib directory of zlib.  It is not
-    part of zlib. In fact none of the stuff in contrib is part of zlib. The
+    part of zlib.  In fact none of the stuff in contrib is part of zlib.  The
-    files in there are not supported by the zlib authors. You need to contact
+    files in there are not supported by the zlib authors.  You need to contact
-    the authors of the contribution for help.
+    the authors of the respective contribution for help.
 
 42. The match.asm code in contrib is under the GNU General Public License.
     Since it's part of zlib, doesn't that mean that all of zlib falls under the
     GNU GPL?
 
-    No. The files in contrib are not part of zlib. They were contributed by
+    No.  The files in contrib are not part of zlib.  They were contributed by
     other authors and are provided as a convenience to the user within the zlib
-    distribution. Each of the items in contrib have their own license.
+    distribution.  Each item in contrib has its own license.
 
-43. Can you please sign these lengthy legal documents and fax them back to us
+43. Is zlib subject to export controls?  What is its ECCN?
+
+    zlib is not subject to export controls, and so is classified as EAR99.
+
+44. Can you please sign these lengthy legal documents and fax them back to us
     so that we can use your software in our product?
 
     No. Go away. Shoo.

INDEX

@@ -2,34 +2,34 @@ CMakeLists.txt  cmake build file
 ChangeLog       history of changes
 FAQ             Frequently Asked Questions about zlib
 INDEX           this file
-Makefile        makefile for Unix (generated by configure)
+Makefile        dummy Makefile that tells you to ./configure
-Makefile.in     makefile for Unix (template for configure)
+Makefile.in     template for Unix Makefile
 README          guess what
 configure       configure script for Unix
-make_vms.com	makefile for VMS
+make_vms.com    makefile for VMS
-treebuild.xml	XML description of source file dependencies
+treebuild.xml   XML description of source file dependencies
-zlib.3		Man page for zlib
+zconf.h.cmakein zconf.h template for cmake
-zlib.map	Linux symbol information
+zconf.h.in      zconf.h template for configure
-zlib.pc.in	Template for pkg-config descriptor
+zlib.3          Man page for zlib
-zlib2ansi	perl script to convert source files for C++ compilation
+zlib.3.pdf      Man page in PDF format
+zlib.map        Linux symbol information
+zlib.pc.in      Template for pkg-config descriptor
+zlib2ansi       perl script to convert source files for C++ compilation
 
 amiga/          makefiles for Amiga SAS C
-as400/          makefiles for IBM AS/400
+as400/		makefiles for AS/400
-doc/		documentation for formats and algorithms
+doc/            documentation for formats and algorithms
 msdos/          makefiles for MSDOS
-nintendods/	makefile for Nintendo DS
+nintendods/     makefile for Nintendo DS
 old/            makefiles for various architectures and zlib documentation
                 files that have not yet been updated for zlib 1.2.x
-projects/       projects for various Integrated Development Environments
 qnx/            makefiles for QNX
-watcom/		makefiles for OpenWatcom
+watcom/         makefiles for OpenWatcom
 win32/          makefiles for Windows
-zlibdefs.h.cmakein      input file for cmake build
 
                 zlib public header files (required for library use):
 zconf.h
 zlib.h
-zlibdefs.h
 
                 private source files used to build the zlib library:
 adler32.c
@@ -40,7 +40,6 @@ deflate.c
 deflate.h
 gzclose.c
 gzguts.h
-gzio.c
 gzlib.c
 gzread.c
 gzwrite.c

Makefile

@@ -1,241 +1,5 @@
-# Makefile for zlib
+all:
-# Copyright (C) 1995-2010 Jean-loup Gailly.
+	-@echo "Please use ./configure first.  Thank you."
-# For conditions of distribution and use, see copyright notice in zlib.h
 
-# To compile and test, type:
+distclean:
-#    ./configure; make test
+	make -f Makefile.in distclean
-# Normally configure builds both a static and a shared library.
-# If you want to build just a static library, use: ./configure --static
-
-# To use the asm code, type:
-#    cp contrib/asm?86/match.S ./match.S
-#    make LOC=-DASMV OBJA=match.o
-
-# To install /usr/local/lib/libz.* and /usr/local/include/zlib.h, type:
-#    make install
-# To install in $HOME instead of /usr/local, use:
-#    make install prefix=$HOME
-
-CC=cc
-
-CFLAGS=-O
-#CFLAGS=-O -DMAX_WBITS=14 -DMAX_MEM_LEVEL=7
-#CFLAGS=-g -DDEBUG
-#CFLAGS=-O3 -Wall -Wwrite-strings -Wpointer-arith -Wconversion \
-#           -Wstrict-prototypes -Wmissing-prototypes
-
-SFLAGS=-O
-
-LDFLAGS=-L. libz.a
-LDSHARED=$(CC)
-CPP=$(CC) -E
-
-STATICLIB=libz.a
-SHAREDLIB=libz.so
-SHAREDLIBV=libz.so.1.2.3.6
-SHAREDLIBM=libz.so.1
-LIBS=$(STATICLIB) $(SHAREDLIB) $(SHAREDLIBV)
-
-AR=ar rc
-RANLIB=ranlib
-TAR=tar
-SHELL=/bin/sh
-EXE=
-
-prefix = /usr/local
-exec_prefix = ${prefix}
-libdir = ${exec_prefix}/lib
-includedir = ${prefix}/include
-mandir = ${prefix}/share/man
-man3dir = ${mandir}/man3
-pkgconfigdir = ${libdir}/pkgconfig
-
-OBJC = adler32.o compress.o crc32.o deflate.o gzclose.o gzio.o gzlib.o gzread.o \
-	gzwrite.o infback.o inffast.o inflate.o inftrees.o trees.o uncompr.o zutil.o
-
-PIC_OBJC = adler32.lo compress.lo crc32.lo deflate.lo gzclose.lo gzio.lo gzlib.lo gzread.lo \
-	gzwrite.lo infback.lo inffast.lo inflate.lo inftrees.lo trees.lo uncompr.lo zutil.lo
-
-# to use the asm code: make OBJA=match.o, PIC_OBJA=match.lo
-OBJA =
-PIC_OBJA =
-
-OBJS = $(OBJC) $(OBJA)
-
-PIC_OBJS = $(PIC_OBJC) $(PIC_OBJA)
-
-all: static shared
-
-static: example$(EXE) minigzip$(EXE)
-
-shared: examplesh$(EXE) minigzipsh$(EXE)
-
-all64: example64$(EXE) minigzip64$(EXE)
-
-check: test
-
-test: all teststatic testshared
-
-teststatic: static
-	@echo hello world | ./minigzip | ./minigzip -d || \
-	  echo '		*** minigzip test FAILED ***' ; \
-	if ./example; then \
-	  echo '		*** zlib test OK ***'; \
-	else \
-	  echo '		*** zlib test FAILED ***'; \
-	fi
-
-testshared: shared
-	@LD_LIBRARY_PATH=`pwd`:$(LD_LIBRARY_PATH) ; export LD_LIBRARY_PATH; \
-	LD_LIBRARYN32_PATH=`pwd`:$(LD_LIBRARYN32_PATH) ; export LD_LIBRARYN32_PATH; \
-	DYLD_LIBRARY_PATH=`pwd`:$(DYLD_LIBRARY_PATH) ; export DYLD_LIBRARY_PATH; \
-	SHLIB_PATH=`pwd`:$(SHLIB_PATH) ; export SHLIB_PATH; \
-	echo hello world | ./minigzipsh | ./minigzipsh -d || \
-	  echo '		*** minigzip shared test FAILED ***' ; \
-	if ./examplesh; then \
-	  echo '		*** zlib shared test OK ***'; \
-	else \
-	  echo '		*** zlib shared test FAILED ***'; \
-	fi
-
-test64: all64
-	@echo hello world | ./minigzip64 | ./minigzip64 -d || \
-	  echo '		*** minigzip 64-bit test FAILED ***' ; \
-	if ./example64; then \
-	  echo '		*** zlib 64-bit test OK ***'; \
-	else \
-	  echo '		*** zlib 64-bit test FAILED ***'; \
-	fi
-
-libz.a: $(OBJS)
-	$(AR) $@ $(OBJS)
-	-@ ($(RANLIB) $@ || true) >/dev/null 2>&1
-
-match.o: match.S
-	$(CPP) match.S > _match.s
-	$(CC) -c _match.s
-	mv _match.o match.o
-	rm -f _match.s
-
-match.lo: match.S
-	$(CPP) match.S > _match.s
-	$(CC) -c -fPIC _match.s
-	mv _match.o match.lo
-	rm -f _match.s
-
-example64.o: example.c zlib.h zconf.h zlibdefs.h
-	$(CC) $(CFLAGS) -D_FILE_OFFSET_BITS=64 -c -o $@ example.c
-
-minigzip64.o: minigzip.c zlib.h zconf.h zlibdefs.h
-	$(CC) $(CFLAGS) -D_FILE_OFFSET_BITS=64 -c -o $@ minigzip.c
-
-.SUFFIXES: .lo
-
-.c.lo:
-	-@if [ ! -d objs ]; then mkdir objs; fi
-	$(CC) $(SFLAGS) -DPIC -c -o objs/$*.o $<
-	-@mv objs/$*.o $@
-
-$(SHAREDLIBV): $(PIC_OBJS)
-	$(LDSHARED) $(SFLAGS) -o $@ $(PIC_OBJS) -lc
-	rm -f $(SHAREDLIB) $(SHAREDLIBM)
-	ln -s $@ $(SHAREDLIB)
-	ln -s $@ $(SHAREDLIBM)
-	-@rmdir objs
-
-example$(EXE): example.o $(STATICLIB)
-	$(CC) $(CFLAGS) -o $@ example.o $(LDFLAGS)
-
-minigzip$(EXE): minigzip.o $(STATICLIB)
-	$(CC) $(CFLAGS) -o $@ minigzip.o $(LDFLAGS)
-
-examplesh$(EXE): example.o $(SHAREDLIBV)
-	$(CC) $(CFLAGS) -o $@ example.o -L. $(SHAREDLIBV)
-
-minigzipsh$(EXE): minigzip.o $(SHAREDLIBV)
-	$(CC) $(CFLAGS) -o $@ minigzip.o -L. $(SHAREDLIBV)
-
-example64$(EXE): example64.o $(STATICLIB)
-	$(CC) $(CFLAGS) -o $@ example64.o $(LDFLAGS)
-
-minigzip64$(EXE): minigzip64.o $(STATICLIB)
-	$(CC) $(CFLAGS) -o $@ minigzip64.o $(LDFLAGS)
-
-install-libs: $(LIBS)
-	-@if [ ! -d $(DESTDIR)$(exec_prefix)  ]; then mkdir -p $(DESTDIR)$(exec_prefix); fi
-	-@if [ ! -d $(DESTDIR)$(libdir)       ]; then mkdir -p $(DESTDIR)$(libdir); fi
-	-@if [ ! -d $(DESTDIR)$(man3dir)      ]; then mkdir -p $(DESTDIR)$(man3dir); fi
-	-@if [ ! -d $(DESTDIR)$(pkgconfigdir) ]; then mkdir -p $(DESTDIR)$(pkgconfigdir); fi
-	cp $(LIBS) $(DESTDIR)$(libdir)
-	cd $(DESTDIR)$(libdir); chmod 755 $(LIBS)
-	-@(cd $(DESTDIR)$(libdir); $(RANLIB) libz.a || true) >/dev/null 2>&1
-	cd $(DESTDIR)$(libdir); if test -f $(SHAREDLIBV); then \
-	  rm -f $(SHAREDLIB) $(SHAREDLIBM); \
-	  ln -s $(SHAREDLIBV) $(SHAREDLIB); \
-	  ln -s $(SHAREDLIBV) $(SHAREDLIBM); \
-	  (ldconfig || true)  >/dev/null 2>&1; \
-	fi
-	cp zlib.3 $(DESTDIR)$(man3dir)
-	chmod 644 $(DESTDIR)$(man3dir)/zlib.3
-	cp zlib.pc $(DESTDIR)$(pkgconfigdir)
-	chmod 644 $(DESTDIR)$(pkgconfigdir)/zlib.pc
-# The ranlib in install is needed on NeXTSTEP which checks file times
-# ldconfig is for Linux
-
-install: install-libs
-	-@if [ ! -d $(DESTDIR)$(includedir)   ]; then mkdir -p $(DESTDIR)$(includedir); fi
-	cp zlib.h zconf.h zlibdefs.h $(DESTDIR)$(includedir)
-	chmod 644 $(DESTDIR)$(includedir)/zlib.h $(DESTDIR)$(includedir)/zconf.h $(DESTDIR)$(includedir)/zlibdefs.h
-
-uninstall:
-	cd $(DESTDIR)$(includedir); rm -f zlib.h zconf.h zlibdefs.h
-	cd $(DESTDIR)$(libdir); rm -f libz.a; \
-	if test -f $(SHAREDLIBV); then \
-	  rm -f $(SHAREDLIBV) $(SHAREDLIB) $(SHAREDLIBM); \
-	fi
-	cd $(DESTDIR)$(man3dir); rm -f zlib.3
-	cd $(DESTDIR)$(pkgconfigdir); rm -f zlib.pc
-
-mostlyclean: clean
-clean:
-	rm -f *.o *.lo *~ \
-	   example$(EXE) minigzip$(EXE) examplesh$(EXE) minigzipsh$(EXE) \
-	   example64$(EXE) minigzip64$(EXE) \
-	   libz.* foo.gz so_locations \
-	   _match.s maketree contrib/infback9/*.o
-	rm -rf objs
-
-maintainer-clean: distclean
-distclean: clean
-	cp -p Makefile.in Makefile
-	rm zlibdefs.h
-	touch -r configure zlibdefs.h
-	rm -f zlib.pc .DS_Store
-
-tags:
-	etags *.[ch]
-
-depend:
-	makedepend -- $(CFLAGS) -- *.[ch]
-
-# DO NOT DELETE THIS LINE -- make depend depends on it.
-
-adler32.o gzio.o zutil.o: zutil.h zlib.h zconf.h zlibdefs.h
-gzclose.o gzlib.o gzread.o gzwrite.o: zlib.h zconf.h zlibdefs.h gzguts.h
-compress.o example.o minigzip.o uncompr.o: zlib.h zconf.h zlibdefs.h
-crc32.o: zutil.h zlib.h zconf.h zlibdefs.h crc32.h
-deflate.o: deflate.h zutil.h zlib.h zconf.h zlibdefs.h
-infback.o inflate.o: zutil.h zlib.h zconf.h zlibdefs.h inftrees.h inflate.h inffast.h inffixed.h
-inffast.o: zutil.h zlib.h zconf.h zlibdefs.h inftrees.h inflate.h inffast.h
-inftrees.o: zutil.h zlib.h zconf.h zlibdefs.h inftrees.h
-trees.o: deflate.h zutil.h zlib.h zconf.h zlibdefs.h trees.h
-
-adler32.lo gzio.lo zutil.lo: zutil.h zlib.h zconf.h zlibdefs.h
-gzclose.lo gzlib.lo gzread.lo gzwrite.lo: zlib.h zconf.h zlibdefs.h gzguts.h
-compress.lo example.lo minigzip.lo uncompr.lo: zlib.h zconf.h zlibdefs.h
-crc32.lo: zutil.h zlib.h zconf.h zlibdefs.h crc32.h
-deflate.lo: deflate.h zutil.h zlib.h zconf.h zlibdefs.h
-infback.lo inflate.lo: zutil.h zlib.h zconf.h zlibdefs.h inftrees.h inflate.h inffast.h inffixed.h
-inffast.lo: zutil.h zlib.h zconf.h zlibdefs.h inftrees.h inflate.h inffast.h
-inftrees.lo: zutil.h zlib.h zconf.h zlibdefs.h inftrees.h
-trees.lo: deflate.h zutil.h zlib.h zconf.h zlibdefs.h trees.h

Makefile.in

@@ -1,5 +1,5 @@
 # Makefile for zlib
-# Copyright (C) 1995-2010 Jean-loup Gailly.
+# Copyright (C) 1995-2011 Jean-loup Gailly.
 # For conditions of distribution and use, see copyright notice in zlib.h
 
 # To compile and test, type:
@@ -25,19 +25,21 @@ CFLAGS=-O
 #           -Wstrict-prototypes -Wmissing-prototypes
 
 SFLAGS=-O
-
+LDFLAGS=
-LDFLAGS=-L. libz.a
+TEST_LDFLAGS=-L. libz.a
 LDSHARED=$(CC)
 CPP=$(CC) -E
 
 STATICLIB=libz.a
 SHAREDLIB=libz.so
-SHAREDLIBV=libz.so.1.2.3.6
+SHAREDLIBV=libz.so.1.2.5.1
 SHAREDLIBM=libz.so.1
-LIBS=$(STATICLIB) $(SHAREDLIB) $(SHAREDLIBV)
+LIBS=$(STATICLIB) $(SHAREDLIBV)
 
 AR=ar rc
 RANLIB=ranlib
+LDCONFIG=ldconfig
+LDSHAREDLIBC=-lc
 TAR=tar
 SHELL=/bin/sh
 EXE=
@@ -45,15 +47,16 @@ EXE=
 prefix = /usr/local
 exec_prefix = ${prefix}
 libdir = ${exec_prefix}/lib
+sharedlibdir = ${libdir}
 includedir = ${prefix}/include
 mandir = ${prefix}/share/man
 man3dir = ${mandir}/man3
 pkgconfigdir = ${libdir}/pkgconfig
 
-OBJC = adler32.o compress.o crc32.o deflate.o gzclose.o gzio.o gzlib.o gzread.o \
+OBJC = adler32.o compress.o crc32.o deflate.o gzclose.o gzlib.o gzread.o \
 	gzwrite.o infback.o inffast.o inflate.o inftrees.o trees.o uncompr.o zutil.o
 
-PIC_OBJC = adler32.lo compress.lo crc32.lo deflate.lo gzclose.lo gzio.lo gzlib.lo gzread.lo \
+PIC_OBJC = adler32.lo compress.lo crc32.lo deflate.lo gzclose.lo gzlib.lo gzread.lo \
 	gzwrite.lo infback.lo inffast.lo inflate.lo inftrees.lo trees.lo uncompr.lo zutil.lo
 
 # to use the asm code: make OBJA=match.o, PIC_OBJA=match.lo
@@ -77,35 +80,32 @@ check: test
 test: all teststatic testshared
 
 teststatic: static
-	@echo hello world | ./minigzip | ./minigzip -d || \
+	@if echo hello world | ./minigzip | ./minigzip -d && ./example; then \
-	  echo '		*** minigzip test FAILED ***' ; \
-	if ./example; then \
 	  echo '		*** zlib test OK ***'; \
 	else \
-	  echo '		*** zlib test FAILED ***'; \
+	  echo '		*** zlib test FAILED ***'; false; \
 	fi
+	-@rm -f foo.gz
 
 testshared: shared
 	@LD_LIBRARY_PATH=`pwd`:$(LD_LIBRARY_PATH) ; export LD_LIBRARY_PATH; \
 	LD_LIBRARYN32_PATH=`pwd`:$(LD_LIBRARYN32_PATH) ; export LD_LIBRARYN32_PATH; \
 	DYLD_LIBRARY_PATH=`pwd`:$(DYLD_LIBRARY_PATH) ; export DYLD_LIBRARY_PATH; \
 	SHLIB_PATH=`pwd`:$(SHLIB_PATH) ; export SHLIB_PATH; \
-	echo hello world | ./minigzipsh | ./minigzipsh -d || \
+	if echo hello world | ./minigzipsh | ./minigzipsh -d && ./examplesh; then \
-	  echo '		*** minigzip shared test FAILED ***' ; \
-	if ./examplesh; then \
 	  echo '		*** zlib shared test OK ***'; \
 	else \
-	  echo '		*** zlib shared test FAILED ***'; \
+	  echo '		*** zlib shared test FAILED ***'; false; \
 	fi
+	-@rm -f foo.gz
 
 test64: all64
-	@echo hello world | ./minigzip64 | ./minigzip64 -d || \
+	@if echo hello world | ./minigzip64 | ./minigzip64 -d && ./example64; then \
-	  echo '		*** minigzip 64-bit test FAILED ***' ; \
-	if ./example64; then \
 	  echo '		*** zlib 64-bit test OK ***'; \
 	else \
-	  echo '		*** zlib 64-bit test FAILED ***'; \
+	  echo '		*** zlib 64-bit test FAILED ***'; false; \
 	fi
+	-@rm -f foo.gz
 
 libz.a: $(OBJS)
 	$(AR) $@ $(OBJS)
@@ -123,31 +123,31 @@ match.lo: match.S
 	mv _match.o match.lo
 	rm -f _match.s
 
-example64.o: example.c zlib.h zconf.h zlibdefs.h
+example64.o: example.c zlib.h zconf.h
 	$(CC) $(CFLAGS) -D_FILE_OFFSET_BITS=64 -c -o $@ example.c
 
-minigzip64.o: minigzip.c zlib.h zconf.h zlibdefs.h
+minigzip64.o: minigzip.c zlib.h zconf.h
 	$(CC) $(CFLAGS) -D_FILE_OFFSET_BITS=64 -c -o $@ minigzip.c
 
 .SUFFIXES: .lo
 
 .c.lo:
-	-@if [ ! -d objs ]; then mkdir objs; fi
+	-@mkdir objs 2>/dev/null || test -d objs
 	$(CC) $(SFLAGS) -DPIC -c -o objs/$*.o $<
 	-@mv objs/$*.o $@
 
-$(SHAREDLIBV): $(PIC_OBJS)
+placebo $(SHAREDLIBV): $(PIC_OBJS) libz.a
-	$(LDSHARED) $(SFLAGS) -o $@ $(PIC_OBJS) -lc
+	$(LDSHARED) $(SFLAGS) -o $@ $(PIC_OBJS) $(LDSHAREDLIBC) $(LDFLAGS)
 	rm -f $(SHAREDLIB) $(SHAREDLIBM)
 	ln -s $@ $(SHAREDLIB)
 	ln -s $@ $(SHAREDLIBM)
 	-@rmdir objs
 
 example$(EXE): example.o $(STATICLIB)
-	$(CC) $(CFLAGS) -o $@ example.o $(LDFLAGS)
+	$(CC) $(CFLAGS) -o $@ example.o $(TEST_LDFLAGS)
 
 minigzip$(EXE): minigzip.o $(STATICLIB)
-	$(CC) $(CFLAGS) -o $@ minigzip.o $(LDFLAGS)
+	$(CC) $(CFLAGS) -o $@ minigzip.o $(TEST_LDFLAGS)
 
 examplesh$(EXE): example.o $(SHAREDLIBV)
 	$(CC) $(CFLAGS) -o $@ example.o -L. $(SHAREDLIBV)
@@ -156,24 +156,29 @@ minigzipsh$(EXE): minigzip.o $(SHAREDLIBV)
 	$(CC) $(CFLAGS) -o $@ minigzip.o -L. $(SHAREDLIBV)
 
 example64$(EXE): example64.o $(STATICLIB)
-	$(CC) $(CFLAGS) -o $@ example64.o $(LDFLAGS)
+	$(CC) $(CFLAGS) -o $@ example64.o $(TEST_LDFLAGS)
 
 minigzip64$(EXE): minigzip64.o $(STATICLIB)
-	$(CC) $(CFLAGS) -o $@ minigzip64.o $(LDFLAGS)
+	$(CC) $(CFLAGS) -o $@ minigzip64.o $(TEST_LDFLAGS)
 
 install-libs: $(LIBS)
 	-@if [ ! -d $(DESTDIR)$(exec_prefix)  ]; then mkdir -p $(DESTDIR)$(exec_prefix); fi
 	-@if [ ! -d $(DESTDIR)$(libdir)       ]; then mkdir -p $(DESTDIR)$(libdir); fi
+	-@if [ ! -d $(DESTDIR)$(sharedlibdir) ]; then mkdir -p $(DESTDIR)$(sharedlibdir); fi
 	-@if [ ! -d $(DESTDIR)$(man3dir)      ]; then mkdir -p $(DESTDIR)$(man3dir); fi
 	-@if [ ! -d $(DESTDIR)$(pkgconfigdir) ]; then mkdir -p $(DESTDIR)$(pkgconfigdir); fi
-	cp $(LIBS) $(DESTDIR)$(libdir)
+	cp $(STATICLIB) $(DESTDIR)$(libdir)
-	cd $(DESTDIR)$(libdir); chmod 755 $(LIBS)
+	chmod 644 $(DESTDIR)$(libdir)/$(STATICLIB)
-	-@(cd $(DESTDIR)$(libdir); $(RANLIB) libz.a || true) >/dev/null 2>&1
+	-@($(RANLIB) $(DESTDIR)$(libdir)/libz.a || true) >/dev/null 2>&1
-	cd $(DESTDIR)$(libdir); if test -f $(SHAREDLIBV); then \
+	-@if test -n "$(SHAREDLIBV)"; then \
-	  rm -f $(SHAREDLIB) $(SHAREDLIBM); \
+	  cp $(SHAREDLIBV) $(DESTDIR)$(sharedlibdir); \
-	  ln -s $(SHAREDLIBV) $(SHAREDLIB); \
+	  echo "cp $(SHAREDLIBV) $(DESTDIR)$(sharedlibdir)"; \
-	  ln -s $(SHAREDLIBV) $(SHAREDLIBM); \
+	  chmod 755 $(DESTDIR)$(sharedlibdir)/$(SHAREDLIBV); \
-	  (ldconfig || true)  >/dev/null 2>&1; \
+	  echo "chmod 755 $(DESTDIR)$(sharedlibdir)/$(SHAREDLIBV)"; \
+	  rm -f $(DESTDIR)$(sharedlibdir)/$(SHAREDLIB) $(DESTDIR)$(sharedlibdir)/$(SHAREDLIBM); \
+	  ln -s $(DESTDIR)$(sharedlibdir)/$(SHAREDLIBV) $(DESTDIR)$(sharedlibdir)/$(SHAREDLIB); \
+	  ln -s $(DESTDIR)$(sharedlibdir)/$(SHAREDLIBV) $(DESTDIR)$(sharedlibdir)/$(SHAREDLIBM); \
+	  ($(LDCONFIG) || true)  >/dev/null 2>&1; \
 	fi
 	cp zlib.3 $(DESTDIR)$(man3dir)
 	chmod 644 $(DESTDIR)$(man3dir)/zlib.3
@@ -184,18 +189,30 @@ install-libs: $(LIBS)
 
 install: install-libs
 	-@if [ ! -d $(DESTDIR)$(includedir)   ]; then mkdir -p $(DESTDIR)$(includedir); fi
-	cp zlib.h zconf.h zlibdefs.h $(DESTDIR)$(includedir)
+	cp zlib.h zconf.h $(DESTDIR)$(includedir)
-	chmod 644 $(DESTDIR)$(includedir)/zlib.h $(DESTDIR)$(includedir)/zconf.h $(DESTDIR)$(includedir)/zlibdefs.h
+	chmod 644 $(DESTDIR)$(includedir)/zlib.h $(DESTDIR)$(includedir)/zconf.h
 
 uninstall:
-	cd $(DESTDIR)$(includedir); rm -f zlib.h zconf.h zlibdefs.h
+	cd $(DESTDIR)$(includedir); rm -f zlib.h zconf.h
 	cd $(DESTDIR)$(libdir); rm -f libz.a; \
-	if test -f $(SHAREDLIBV); then \
+	if test -n "$(SHAREDLIBV)" -a -f $(SHAREDLIBV); then \
 	  rm -f $(SHAREDLIBV) $(SHAREDLIB) $(SHAREDLIBM); \
 	fi
 	cd $(DESTDIR)$(man3dir); rm -f zlib.3
 	cd $(DESTDIR)$(pkgconfigdir); rm -f zlib.pc
 
+docs: zlib.3.pdf
+
+zlib.3.pdf: zlib.3
+	groff -mandoc -f H -T ps zlib.3 | ps2pdf - zlib.3.pdf
+
+zconf.h.in: zconf.h.cmakein
+	sed "/^#cmakedefine/D" < zconf.h.cmakein > zconf.h.in
+	touch -r zconf.h.cmakein zconf.h.in
+
+zconf: zconf.h.in
+	cp -p zconf.h.in zconf.h
+
 mostlyclean: clean
 clean:
 	rm -f *.o *.lo *~ \
@@ -206,11 +223,12 @@ clean:
 	rm -rf objs
 
 maintainer-clean: distclean
-distclean: clean
+distclean: clean zconf docs
-	cp -p Makefile.in Makefile
+	rm -f Makefile zlib.pc
-	rm zlibdefs.h
+	-@rm -f .DS_Store
-	touch -r configure zlibdefs.h
+	-@printf 'all:\n\t-@echo "Please use ./configure first.  Thank you."\n' > Makefile
-	rm -f zlib.pc .DS_Store
+	-@printf '\ndistclean:\n\tmake -f Makefile.in distclean\n' >> Makefile
+	-@touch -r Makefile.in Makefile
 
 tags:
 	etags *.[ch]
@@ -220,22 +238,22 @@ depend:
 
 # DO NOT DELETE THIS LINE -- make depend depends on it.
 
-adler32.o gzio.o zutil.o: zutil.h zlib.h zconf.h zlibdefs.h
+adler32.o zutil.o: zutil.h zlib.h zconf.h
-gzclose.o gzlib.o gzread.o gzwrite.o: zlib.h zconf.h zlibdefs.h gzguts.h
+gzclose.o gzlib.o gzread.o gzwrite.o: zlib.h zconf.h gzguts.h
-compress.o example.o minigzip.o uncompr.o: zlib.h zconf.h zlibdefs.h
+compress.o example.o minigzip.o uncompr.o: zlib.h zconf.h
-crc32.o: zutil.h zlib.h zconf.h zlibdefs.h crc32.h
+crc32.o: zutil.h zlib.h zconf.h crc32.h
-deflate.o: deflate.h zutil.h zlib.h zconf.h zlibdefs.h
+deflate.o: deflate.h zutil.h zlib.h zconf.h
-infback.o inflate.o: zutil.h zlib.h zconf.h zlibdefs.h inftrees.h inflate.h inffast.h inffixed.h
+infback.o inflate.o: zutil.h zlib.h zconf.h inftrees.h inflate.h inffast.h inffixed.h
-inffast.o: zutil.h zlib.h zconf.h zlibdefs.h inftrees.h inflate.h inffast.h
+inffast.o: zutil.h zlib.h zconf.h inftrees.h inflate.h inffast.h
-inftrees.o: zutil.h zlib.h zconf.h zlibdefs.h inftrees.h
+inftrees.o: zutil.h zlib.h zconf.h inftrees.h
-trees.o: deflate.h zutil.h zlib.h zconf.h zlibdefs.h trees.h
+trees.o: deflate.h zutil.h zlib.h zconf.h trees.h
 
-adler32.lo gzio.lo zutil.lo: zutil.h zlib.h zconf.h zlibdefs.h
+adler32.lo zutil.lo: zutil.h zlib.h zconf.h
-gzclose.lo gzlib.lo gzread.lo gzwrite.lo: zlib.h zconf.h zlibdefs.h gzguts.h
+gzclose.lo gzlib.lo gzread.lo gzwrite.lo: zlib.h zconf.h gzguts.h
-compress.lo example.lo minigzip.lo uncompr.lo: zlib.h zconf.h zlibdefs.h
+compress.lo example.lo minigzip.lo uncompr.lo: zlib.h zconf.h
-crc32.lo: zutil.h zlib.h zconf.h zlibdefs.h crc32.h
+crc32.lo: zutil.h zlib.h zconf.h crc32.h
-deflate.lo: deflate.h zutil.h zlib.h zconf.h zlibdefs.h
+deflate.lo: deflate.h zutil.h zlib.h zconf.h
-infback.lo inflate.lo: zutil.h zlib.h zconf.h zlibdefs.h inftrees.h inflate.h inffast.h inffixed.h
+infback.lo inflate.lo: zutil.h zlib.h zconf.h inftrees.h inflate.h inffast.h inffixed.h
-inffast.lo: zutil.h zlib.h zconf.h zlibdefs.h inftrees.h inflate.h inffast.h
+inffast.lo: zutil.h zlib.h zconf.h inftrees.h inflate.h inffast.h
-inftrees.lo: zutil.h zlib.h zconf.h zlibdefs.h inftrees.h
+inftrees.lo: zutil.h zlib.h zconf.h inftrees.h
-trees.lo: deflate.h zutil.h zlib.h zconf.h zlibdefs.h trees.h
+trees.lo: deflate.h zutil.h zlib.h zconf.h trees.h

README

@@ -1,56 +1,52 @@
 ZLIB DATA COMPRESSION LIBRARY
 
-zlib 1.2.3.6 is a general purpose data compression library.  All the code is
+zlib 1.2.5.1 is a general purpose data compression library.  All the code is
 thread safe.  The data format used by the zlib library is described by RFCs
 (Request for Comments) 1950 to 1952 in the files
-http://www.ietf.org/rfc/rfc1950.txt (zlib format), rfc1951.txt (deflate format)
+http://tools.ietf.org/html/rfc1950 (zlib format), rfc1951 (deflate format) and
-and rfc1952.txt (gzip format). These documents are also available in other
+rfc1952 (gzip format).
-formats from ftp://ftp.uu.net/graphics/png/documents/zlib/zdoc-index.html
 
 All functions of the compression library are documented in the file zlib.h
-(volunteer to write man pages welcome, contact zlib@gzip.org). A usage example
+(volunteer to write man pages welcome, contact zlib@gzip.org).  A usage example
 of the library is given in the file example.c which also tests that the library
-is working correctly. Another example is given in the file minigzip.c. The
+is working correctly.  Another example is given in the file minigzip.c.  The
 compression library itself is composed of all source files except example.c and
 minigzip.c.
 
 To compile all files and run the test program, follow the instructions given at
-the top of Makefile. In short "make test; make install" should work for most
+the top of Makefile.in.  In short "./configure; make test", and if that goes
-machines. For Unix: "./configure; make test; make install". For MSDOS, use one
+well, "make install" should work for most flavors of Unix.  For Windows, use one
-of the special makefiles such as Makefile.msc. For VMS, use make_vms.com.
+of the special makefiles in win32/ or contrib/vstudio/ .  For VMS, use
+make_vms.com.
 
 Questions about zlib should be sent to <zlib@gzip.org>, or to Gilles Vollant
-<info@winimage.com> for the Windows DLL version. The zlib home page is
+<info@winimage.com> for the Windows DLL version.  The zlib home page is
-http://www.zlib.org or http://www.gzip.org/zlib/ Before reporting a problem,
+http://zlib.net/ .  Before reporting a problem, please check this site to
-please check this site to verify that you have the latest version of zlib;
+verify that you have the latest version of zlib; otherwise get the latest
-otherwise get the latest version and check whether the problem still exists or
+version and check whether the problem still exists or not.
-not.
 
-PLEASE read the zlib FAQ http://www.gzip.org/zlib/zlib_faq.html before asking
+PLEASE read the zlib FAQ http://zlib.net/zlib_faq.html before asking for help.
-for help.
 
-Mark Nelson <markn@ieee.org> wrote an article about zlib for the Jan. 1997
+Mark Nelson <markn@ieee.org> wrote an article about zlib for the Jan.  1997
-issue of  Dr. Dobb's Journal; a copy of the article is available in
+issue of Dr.  Dobb's Journal; a copy of the article is available at
-http://dogma.net/markn/articles/zlibtool/zlibtool.htm
+http://marknelson.us/1997/01/01/zlib-engine/ .
 
-The changes made in version 1.2.3.6 are documented in the file ChangeLog.
+The changes made in version 1.2.5.1 are documented in the file ChangeLog.
 
-Unsupported third party contributions are provided in directory "contrib".
+Unsupported third party contributions are provided in directory contrib/ .
 
-A Java implementation of zlib is available in the Java Development Kit
+zlib is available in Java using the java.util.zip package, documented at
-http://java.sun.com/j2se/1.4.2/docs/api/java/util/zip/package-summary.html
+http://java.sun.com/developer/technicalArticles/Programming/compression/ .
-See the zlib home page http://www.zlib.org for details.
 
-A Perl interface to zlib written by Paul Marquess <pmqs@cpan.org> is in the
+A Perl interface to zlib written by Paul Marquess <pmqs@cpan.org> is available
-CPAN (Comprehensive Perl Archive Network) sites
+at CPAN (Comprehensive Perl Archive Network) sites, including
-http://www.cpan.org/modules/by-module/Compress/
+http://search.cpan.org/~pmqs/IO-Compress-Zlib/ .
 
 A Python interface to zlib written by A.M. Kuchling <amk@amk.ca> is
 available in Python 1.5 and later versions, see
-http://www.python.org/doc/lib/module-zlib.html
+http://www.python.org/doc/lib/module-zlib.html .
 
-A zlib binding for TCL written by Andreas Kupries <a.kupries@westend.com> is
+zlib is built into tcl: http://wiki.tcl.tk/4610 .
-availlable at http://www.oche.de/~akupries/soft/trf/trf_zip.html
 
 An experimental package to read and write files in .zip format, written on top
 of zlib by Gilles Vollant <info@winimage.com>, is available in the
@@ -74,25 +70,21 @@ Notes for some targets:
 - zlib doesn't work on HP-UX 9.05 with some versions of /bin/cc. It works with
   other compilers. Use "make test" to check your compiler.
 
-- gzdopen is not supported on RISCOS, BEOS and by some Mac compilers.
+- gzdopen is not supported on RISCOS or BEOS.
 
 - For PalmOs, see http://palmzlib.sourceforge.net/
 
-- When building a shared, i.e. dynamic library on Mac OS X, the library must be
-  installed before testing (do "make install" before "make test"), since the
-  library location is specified in the library.
-
 
 Acknowledgments:
 
-  The deflate format used by zlib was defined by Phil Katz. The deflate
+  The deflate format used by zlib was defined by Phil Katz.  The deflate and
-  and zlib specifications were written by L. Peter Deutsch. Thanks to all the
+  zlib specifications were written by L.  Peter Deutsch.  Thanks to all the
-  people who reported problems and suggested various improvements in zlib;
+  people who reported problems and suggested various improvements in zlib; they
-  they are too numerous to cite here.
+  are too numerous to cite here.
 
 Copyright notice:
 
- (C) 1995-2004 Jean-loup Gailly and Mark Adler
+ (C) 1995-2011 Jean-loup Gailly and Mark Adler
 
   This software is provided 'as-is', without any express or implied
   warranty.  In no event will the authors be held liable for any damages
@@ -113,13 +105,11 @@ Copyright notice:
   Jean-loup Gailly        Mark Adler
   jloup@gzip.org          madler@alumni.caltech.edu
 
-If you use the zlib library in a product, we would appreciate *not*
+If you use the zlib library in a product, we would appreciate *not* receiving
-receiving lengthy legal documents to sign. The sources are provided
+lengthy legal documents to sign.  The sources are provided for free but without
-for free but without warranty of any kind.  The library has been
+warranty of any kind.  The library has been entirely written by Jean-loup
-entirely written by Jean-loup Gailly and Mark Adler; it does not
+Gailly and Mark Adler; it does not include third-party code.
-include third-party code.
 
-If you redistribute modified sources, we would appreciate that you include
+If you redistribute modified sources, we would appreciate that you include in
-in the file ChangeLog history information documenting your changes. Please
+the file ChangeLog history information documenting your changes.  Please read
-read the FAQ for more information on the distribution of modified source
+the FAQ for more information on the distribution of modified source versions.
-versions.

adler32.c

@@ -1,5 +1,5 @@
 /* adler32.c -- compute the Adler-32 checksum of a data stream
- * Copyright (C) 1995-2007 Mark Adler
+ * Copyright (C) 1995-2011 Mark Adler
  * For conditions of distribution and use, see copyright notice in zlib.h
  */
 
@@ -9,9 +9,9 @@
 
 #define local static
 
-local uLong adler32_combine_(uLong adler1, uLong adler2, z_off64_t len2);
+local uLong adler32_combine_ OF((uLong adler1, uLong adler2, z_off64_t len2));
 
-#define BASE 65521UL    /* largest prime smaller than 65536 */
+#define BASE 65521      /* largest prime smaller than 65536 */
 #define NMAX 5552
 /* NMAX is the largest n such that 255n(n+1)/2 + (n+1)(BASE-1) <= 2^32-1 */
 
@@ -21,39 +21,44 @@ local uLong adler32_combine_(uLong adler1, uLong adler2, z_off64_t len2);
 #define DO8(buf,i)  DO4(buf,i); DO4(buf,i+4);
 #define DO16(buf)   DO8(buf,0); DO8(buf,8);
 
-/* use NO_DIVIDE if your processor does not do division in hardware */
+/* use NO_DIVIDE if your processor does not do division in hardware --
+   try it both ways to see which is faster */
 #ifdef NO_DIVIDE
-#  define MOD(a) \
+/* note that this assumes BASE is 65521, where 65536 % 65521 == 15
+   (thank you to John Reiser for pointing this out) */
+#  define CHOP(a) \
     do { \
-        if (a >= (BASE << 16)) a -= (BASE << 16); \
+        unsigned long tmp = a >> 16; \
-        if (a >= (BASE << 15)) a -= (BASE << 15); \
+        a &= 0xffffUL; \
-        if (a >= (BASE << 14)) a -= (BASE << 14); \
+        a += (tmp << 4) - tmp; \
-        if (a >= (BASE << 13)) a -= (BASE << 13); \
+    } while (0)
-        if (a >= (BASE << 12)) a -= (BASE << 12); \
+#  define MOD28(a) \
-        if (a >= (BASE << 11)) a -= (BASE << 11); \
+    do { \
-        if (a >= (BASE << 10)) a -= (BASE << 10); \
+        CHOP(a); \
-        if (a >= (BASE << 9)) a -= (BASE << 9); \
-        if (a >= (BASE << 8)) a -= (BASE << 8); \
-        if (a >= (BASE << 7)) a -= (BASE << 7); \
-        if (a >= (BASE << 6)) a -= (BASE << 6); \
-        if (a >= (BASE << 5)) a -= (BASE << 5); \
-        if (a >= (BASE << 4)) a -= (BASE << 4); \
-        if (a >= (BASE << 3)) a -= (BASE << 3); \
-        if (a >= (BASE << 2)) a -= (BASE << 2); \
-        if (a >= (BASE << 1)) a -= (BASE << 1); \
         if (a >= BASE) a -= BASE; \
     } while (0)
-#  define MOD4(a) \
+#  define MOD(a) \
     do { \
-        if (a >= (BASE << 4)) a -= (BASE << 4); \
+        CHOP(a); \
-        if (a >= (BASE << 3)) a -= (BASE << 3); \
+        MOD28(a); \
-        if (a >= (BASE << 2)) a -= (BASE << 2); \
+    } while (0)
-        if (a >= (BASE << 1)) a -= (BASE << 1); \
+#  define MOD63(a) \
+    do { /* this assumes a is not negative */ \
+        z_off64_t tmp = a >> 32; \
+        a &= 0xffffffffL; \
+        a += (tmp << 8) - (tmp << 5) + tmp; \
+        tmp = a >> 16; \
+        a &= 0xffffL; \
+        a += (tmp << 4) - tmp; \
+        tmp = a >> 16; \
+        a &= 0xffffL; \
+        a += (tmp << 4) - tmp; \
         if (a >= BASE) a -= BASE; \
     } while (0)
 #else
 #  define MOD(a) a %= BASE
-#  define MOD4(a) a %= BASE
+#  define MOD28(a) a %= BASE
+#  define MOD63(a) a %= BASE
 #endif
 
 /* ========================================================================= */
@@ -92,7 +97,7 @@ uLong ZEXPORT adler32(adler, buf, len)
         }
         if (adler >= BASE)
             adler -= BASE;
-        MOD4(sum2);             /* only added so many BASE's */
+        MOD28(sum2);            /* only added so many BASE's */
         return adler | (sum2 << 16);
     }
 
@@ -137,8 +142,13 @@ local uLong adler32_combine_(adler1, adler2, len2)
     unsigned long sum2;
     unsigned rem;
 
+    /* for negative len, return invalid adler32 as a clue for debugging */
+    if (len2 < 0)
+        return 0xffffffffUL;
+
     /* the derivation of this formula is left as an exercise for the reader */
-    rem = (unsigned)(len2 % BASE);
+    MOD63(len2);                /* assumes len2 >= 0 */
+    rem = (unsigned)len2;
     sum1 = adler1 & 0xffff;
     sum2 = rem * sum1;
     MOD(sum2);

amiga/Makefile.pup

@@ -14,7 +14,7 @@ LDFLAGS	= -o
 LDLIBS	= LIB:scppc.a LIB:end.o
 RM	= delete quiet
 
-OBJS = adler32.o compress.o crc32.o gzclose.o gzio.o gzlib.o gzread.o gzwrite.o \
+OBJS = adler32.o compress.o crc32.o gzclose.o gzlib.o gzread.o gzwrite.o \
        uncompr.o deflate.o trees.o zutil.o inflate.o infback.o inftrees.o inffast.o
 
 TEST_OBJS = example.o minigzip.o
@@ -56,7 +56,6 @@ crc32.o: crc32.h zlib.h zconf.h
 deflate.o: deflate.h zutil.h zlib.h zconf.h
 example.o: zlib.h zconf.h
 gzclose.o: zlib.h zconf.h gzguts.h
-gzio.o: zutil.h zlib.h zconf.h
 gzlib.o: zlib.h zconf.h gzguts.h
 gzread.o: zlib.h zconf.h gzguts.h
 gzwrite.o: zlib.h zconf.h gzguts.h

amiga/Makefile.sas

@@ -13,7 +13,7 @@ SCOPTIONS=OPTSCHED OPTINLINE OPTALIAS OPTTIME OPTINLOCAL STRMERGE \
        NOICONS PARMS=BOTH NOSTACKCHECK UTILLIB NOVERSION ERRORREXX \
        DEF=POSTINC
 
-OBJS = adler32.o compress.o crc32.o gzclose.o gzio.o gzlib.o gzread.o gzwrite.o \
+OBJS = adler32.o compress.o crc32.o gzclose.o gzlib.o gzread.o gzwrite.o \
        uncompr.o deflate.o trees.o zutil.o inflate.o infback.o inftrees.o inffast.o
 
 TEST_OBJS = example.o minigzip.o
@@ -55,7 +55,6 @@ crc32.o: crc32.h zlib.h zconf.h
 deflate.o: deflate.h zutil.h zlib.h zconf.h
 example.o: zlib.h zconf.h
 gzclose.o: zlib.h zconf.h gzguts.h
-gzio.o: zutil.h zlib.h zconf.h
 gzlib.o: zlib.h zconf.h gzguts.h
 gzread.o: zlib.h zconf.h gzguts.h
 gzwrite.o: zlib.h zconf.h gzguts.h

as400/bndsrc

@@ -34,6 +34,7 @@ STRPGMEXP PGMLVL(*CURRENT) SIGNATURE('ZLIB')
   EXPORT SYMBOL("deflateCopy")
   EXPORT SYMBOL("deflateReset")
   EXPORT SYMBOL("deflateParams")
+  EXPORT SYMBOL("deflatePending")
   EXPORT SYMBOL("deflatePrime")
   EXPORT SYMBOL("deflateInit_")
   EXPORT SYMBOL("deflateInit2_")
@@ -129,4 +130,54 @@ STRPGMEXP PGMLVL(*CURRENT) SIGNATURE('ZLIB')
 
   EXPORT SYMBOL("zlibCompileFlags")
 
+/*@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@*/
+/*   Version 1.2.5 additional entry points.                         */
+/*@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@*/
+
+/********************************************************************/
+/*   *MODULE      ADLER32      ZLIB         01/02/01  00:15:09      */
+/********************************************************************/
+
+  EXPORT SYMBOL("adler32_combine")
+  EXPORT SYMBOL("adler32_combine64")
+
+/********************************************************************/
+/*   *MODULE      CRC32        ZLIB         01/02/01  00:15:09      */
+/********************************************************************/
+
+  EXPORT SYMBOL("crc32_combine")
+  EXPORT SYMBOL("crc32_combine64")
+
+/********************************************************************/
+/*   *MODULE      GZLIB        ZLIB         01/02/01  00:15:09      */
+/********************************************************************/
+
+  EXPORT SYMBOL("gzbuffer")
+  EXPORT SYMBOL("gzoffset")
+  EXPORT SYMBOL("gzoffset64")
+  EXPORT SYMBOL("gzopen64")
+  EXPORT SYMBOL("gzseek64")
+  EXPORT SYMBOL("gztell64")
+
+/********************************************************************/
+/*   *MODULE      GZREAD       ZLIB         01/02/01  00:15:09      */
+/********************************************************************/
+
+  EXPORT SYMBOL("gzclose_r")
+
+/********************************************************************/
+/*   *MODULE      GZWRITE      ZLIB         01/02/01  00:15:09      */
+/********************************************************************/
+
+  EXPORT SYMBOL("gzclose_w")
+
+/********************************************************************/
+/*   *MODULE      INFLATE      ZLIB         01/02/01  00:15:09      */
+/********************************************************************/
+
+  EXPORT SYMBOL("inflateMark")
+  EXPORT SYMBOL("inflatePrime")
+  EXPORT SYMBOL("inflateReset2")
+  EXPORT SYMBOL("inflateUndermine")
+
 ENDPGMEXP

as400/compile.clp

@@ -26,85 +26,70 @@
              DCL        VAR(&CFLAGS) TYPE(*CHAR) +
                           VALUE('OPTIMIZE(40)')                 /* Compile options. */
 
+             DCL        VAR(&TGTRLS) TYPE(*CHAR) +
+                          VALUE('V5R3M0')                       /* Target release. */
+
 
 /*      Working storage.                                                      */
 
              DCL        VAR(&CMDLEN) TYPE(*DEC) LEN(15 5) VALUE(300)    /* Command length. */
              DCL        VAR(&CMD) TYPE(*CHAR) LEN(512)
+             DCL        VAR(&FIXDCMD) TYPE(*CHAR) LEN(512)
 
 
 /*      Compile sources into modules.                                         */
 
-             CHGVAR     VAR(&CMD) VALUE('CRTCMOD MODULE(' *TCAT &MODLIB *TCAT  +
+             CHGVAR     VAR(&FIXDCMD) VALUE('CRTCMOD' *BCAT &CFLAGS *BCAT      +
-                        '/ADLER32)               SRCFILE(' *TCAT               +
+                        'SYSIFCOPT(*IFS64IO)' *BCAT                            +
-                        &SRCLIB *TCAT '/' *TCAT &SRCFILE *TCAT                 +
+                        'DEFINE(''_LARGEFILE64_SOURCE''' *BCAT                 +
-                        ') SYSIFCOPT(*IFSIO)' *BCAT &CFLAGS)
+                        '''_LFS64_LARGEFILE=1'') TGTRLS(' *TCAT &TGTRLS *TCAT  +
+                        ') SRCFILE(' *TCAT &SRCLIB *TCAT '/' *TCAT             +
+                        &SRCFILE *TCAT ') MODULE(' *TCAT &MODLIB *TCAT '/')
+
+
+             CHGVAR     VAR(&CMD) VALUE(&FIXDCMD *TCAT 'ADLER32)')
              CALL       PGM(QCMDEXC) PARM(&CMD &CMDLEN)
 
-             CHGVAR     VAR(&CMD) VALUE('CRTCMOD MODULE(' *TCAT &MODLIB *TCAT  +
+             CHGVAR     VAR(&CMD) VALUE(&FIXDCMD *TCAT 'COMPRESS)')
-                        '/COMPRESS)              SRCFILE(' *TCAT               +
-                        &SRCLIB *TCAT '/' *TCAT &SRCFILE *TCAT                 +
-                        ') SYSIFCOPT(*IFSIO)' *BCAT &CFLAGS)
              CALL       PGM(QCMDEXC) PARM(&CMD &CMDLEN)
 
-             CHGVAR     VAR(&CMD) VALUE('CRTCMOD MODULE(' *TCAT &MODLIB *TCAT  +
+             CHGVAR     VAR(&CMD) VALUE(&FIXDCMD *TCAT 'CRC32)')
-                        '/CRC32)                 SRCFILE(' *TCAT               +
-                        &SRCLIB *TCAT '/' *TCAT &SRCFILE *TCAT                 +
-                        ') SYSIFCOPT(*IFSIO)' *BCAT &CFLAGS)
              CALL       PGM(QCMDEXC) PARM(&CMD &CMDLEN)
 
-             CHGVAR     VAR(&CMD) VALUE('CRTCMOD MODULE(' *TCAT &MODLIB *TCAT  +
+             CHGVAR     VAR(&CMD) VALUE(&FIXDCMD *TCAT 'DEFLATE)')
-                        '/DEFLATE)               SRCFILE(' *TCAT               +
-                        &SRCLIB *TCAT '/' *TCAT &SRCFILE *TCAT                 +
-                        ') SYSIFCOPT(*IFSIO)' *BCAT &CFLAGS)
              CALL       PGM(QCMDEXC) PARM(&CMD &CMDLEN)
 
-             CHGVAR     VAR(&CMD) VALUE('CRTCMOD MODULE(' *TCAT &MODLIB *TCAT  +
+             CHGVAR     VAR(&CMD) VALUE(&FIXDCMD *TCAT 'GZCLOSE)')
-                        '/GZIO)                  SRCFILE(' *TCAT               +
-                        &SRCLIB *TCAT '/' *TCAT &SRCFILE *TCAT                 +
-                        ') SYSIFCOPT(*IFSIO)' *BCAT &CFLAGS)
              CALL       PGM(QCMDEXC) PARM(&CMD &CMDLEN)
 
-             CHGVAR     VAR(&CMD) VALUE('CRTCMOD MODULE(' *TCAT &MODLIB *TCAT  +
+             CHGVAR     VAR(&CMD) VALUE(&FIXDCMD *TCAT 'GZLIB)')
-                        '/INFBACK)               SRCFILE(' *TCAT               +
-                        &SRCLIB *TCAT '/' *TCAT &SRCFILE *TCAT                 +
-                        ') SYSIFCOPT(*IFSIO)' *BCAT &CFLAGS)
              CALL       PGM(QCMDEXC) PARM(&CMD &CMDLEN)
 
-             CHGVAR     VAR(&CMD) VALUE('CRTCMOD MODULE(' *TCAT &MODLIB *TCAT  +
+             CHGVAR     VAR(&CMD) VALUE(&FIXDCMD *TCAT 'GZREAD)')
-                        '/INFFAST)               SRCFILE(' *TCAT               +
-                        &SRCLIB *TCAT '/' *TCAT &SRCFILE *TCAT                 +
-                        ') SYSIFCOPT(*IFSIO)' *BCAT &CFLAGS)
              CALL       PGM(QCMDEXC) PARM(&CMD &CMDLEN)
 
-             CHGVAR     VAR(&CMD) VALUE('CRTCMOD MODULE(' *TCAT &MODLIB *TCAT  +
+             CHGVAR     VAR(&CMD) VALUE(&FIXDCMD *TCAT 'GZWRITE)')
-                        '/INFLATE)               SRCFILE(' *TCAT               +
-                        &SRCLIB *TCAT '/' *TCAT &SRCFILE *TCAT                 +
-                        ') SYSIFCOPT(*IFSIO)' *BCAT &CFLAGS)
              CALL       PGM(QCMDEXC) PARM(&CMD &CMDLEN)
 
-             CHGVAR     VAR(&CMD) VALUE('CRTCMOD MODULE(' *TCAT &MODLIB *TCAT  +
+             CHGVAR     VAR(&CMD) VALUE(&FIXDCMD *TCAT 'INFBACK)')
-                        '/INFTREES)              SRCFILE(' *TCAT               +
-                        &SRCLIB *TCAT '/' *TCAT &SRCFILE *TCAT                 +
-                        ') SYSIFCOPT(*IFSIO)' *BCAT &CFLAGS)
              CALL       PGM(QCMDEXC) PARM(&CMD &CMDLEN)
 
-             CHGVAR     VAR(&CMD) VALUE('CRTCMOD MODULE(' *TCAT &MODLIB *TCAT  +
+             CHGVAR     VAR(&CMD) VALUE(&FIXDCMD *TCAT 'INFFAST)')
-                        '/TREES)                 SRCFILE(' *TCAT               +
-                        &SRCLIB *TCAT '/' *TCAT &SRCFILE *TCAT                 +
-                        ') SYSIFCOPT(*IFSIO)' *BCAT &CFLAGS)
              CALL       PGM(QCMDEXC) PARM(&CMD &CMDLEN)
 
-             CHGVAR     VAR(&CMD) VALUE('CRTCMOD MODULE(' *TCAT &MODLIB *TCAT  +
+             CHGVAR     VAR(&CMD) VALUE(&FIXDCMD *TCAT 'INFLATE)')
-                        '/UNCOMPR)               SRCFILE(' *TCAT               +
-                        &SRCLIB *TCAT '/' *TCAT &SRCFILE *TCAT                 +
-                        ') SYSIFCOPT(*IFSIO)' *BCAT &CFLAGS)
              CALL       PGM(QCMDEXC) PARM(&CMD &CMDLEN)
 
-             CHGVAR     VAR(&CMD) VALUE('CRTCMOD MODULE(' *TCAT &MODLIB *TCAT  +
+             CHGVAR     VAR(&CMD) VALUE(&FIXDCMD *TCAT 'INFTREES)')
-                        '/ZUTIL)                 SRCFILE(' *TCAT               +
+             CALL       PGM(QCMDEXC) PARM(&CMD &CMDLEN)
-                        &SRCLIB *TCAT '/' *TCAT &SRCFILE *TCAT                 +
+
-                        ') SYSIFCOPT(*IFSIO)' *BCAT &CFLAGS)
+             CHGVAR     VAR(&CMD) VALUE(&FIXDCMD *TCAT 'TREES)')
+             CALL       PGM(QCMDEXC) PARM(&CMD &CMDLEN)
+
+             CHGVAR     VAR(&CMD) VALUE(&FIXDCMD *TCAT 'UNCOMPR)')
+             CALL       PGM(QCMDEXC) PARM(&CMD &CMDLEN)
+
+             CHGVAR     VAR(&CMD) VALUE(&FIXDCMD *TCAT 'ZUTIL)')
              CALL       PGM(QCMDEXC) PARM(&CMD &CMDLEN)
 
 
@@ -113,11 +98,13 @@
              CRTSRVPGM  SRVPGM(&SRVLIB/ZLIB) +
                           MODULE(&MODLIB/ADLER32     &MODLIB/COMPRESS    +
                                  &MODLIB/CRC32       &MODLIB/DEFLATE     +
-                                 &MODLIB/GZIO        &MODLIB/INFBACK     +
+                                 &MODLIB/GZCLOSE     &MODLIB/GZLIB       +
-                                 &MODLIB/INFFAST     &MODLIB/INFLATE     +
+                                 &MODLIB/GZREAD      &MODLIB/GZWRITE     +
-                                 &MODLIB/INFTREES    &MODLIB/TREES       +
+                                 &MODLIB/INFBACK     &MODLIB/INFFAST     +
-                                 &MODLIB/UNCOMPR     &MODLIB/ZUTIL)      +
+                                 &MODLIB/INFLATE     &MODLIB/INFTREES    +
-                          SRCFILE(&SRCLIB/&CTLFILE) SRCMBR(BNDSRC) +
+                                 &MODLIB/TREES       &MODLIB/UNCOMPR     +
-                          TEXT('ZLIB 1.2.3') TGTRLS(V4R4M0)
+                                 &MODLIB/ZUTIL)                          +
+                          SRCFILE(&SRCLIB/&CTLFILE) SRCMBR(BNDSRC)       +
+                          TEXT('ZLIB 1.2.5.1') TGTRLS(&TGTRLS)
 
              ENDPGM

as400/readme.txt

@@ -1,4 +1,4 @@
-        ZLIB version 1.2.3 for AS400 installation instructions
+        ZLIB version 1.2.5.1 for AS400 installation instructions
 
 I) From an AS400 *SAVF file:
 
@@ -70,7 +70,10 @@ II) From the original source distribution:
     compress.c          COMPRESS C     ZLIB - Compress a memory buffer
     crc32.c             CRC32    C     ZLIB - Compute the CRC-32 of a data stream
     deflate.c           DEFLATE  C     ZLIB - Compress data using the deflation algorithm
-    gzio.c              GZIO     C     ZLIB - IO on .gz files
+    gzclose.c           GZCLOSE  C     ZLIB - Close .gz files
+    gzlib.c             GZLIB    C     ZLIB - Miscellaneous .gz files IO support
+    gzread.c            GZREAD   C     ZLIB - Read .gz files
+    gzwrite.c           GZWRITE  C     ZLIB - Write .gz files
     infback.c           INFBACK  C     ZLIB - Inflate using a callback interface
     inffast.c           INFFAST  C     ZLIB - Fast proc. literals & length/distance pairs
     inflate.c           INFLATE  C     ZLIB - Interface to inflate modules
@@ -81,6 +84,7 @@ II) From the original source distribution:
                 H                      Original ZLIB C and ILE/RPG include files
     crc32.h             CRC32    C     ZLIB - CRC32 tables
     deflate.h           DEFLATE  C     ZLIB - Internal compression state
+    gzguts.h            GZGUTS   C     ZLIB - Definitions for the gzclose module
     inffast.h           INFFAST  C     ZLIB - Header to use inffast.c
     inffixed.h          INFFIXED C     ZLIB - Table for decoding fixed codes
     inflate.h           INFLATE  C     ZLIB - Internal inflate state definitions
@@ -108,4 +112,4 @@ Notes:  For AS400 ILE RPG programmers, a /copy member defining the ZLIB
                 implementation does not handle conversion from/to ASCII, so
                 text data code conversions must be done explicitely.
 
-        Always open zipped files in binary mode.
+        Mainly for the reason above, always open zipped files in binary mode.

as400/zlib.inc

@@ -1,7 +1,7 @@
       *  ZLIB.INC - Interface to the general purpose compression library
       *
       *  ILE RPG400 version by Patrick Monnerat, DATASPHERE.
-      *  Version 1.2.3.6
+      *  Version 1.2.5.1
       *
       *
       *  WARNING:
@@ -22,16 +22,25 @@
       *
       *  Versioning information.
       *
-     D ZLIB_VERSION    C                   '1.2.3.6'
+     D ZLIB_VERSION    C                   '1.2.5.1'
-     D ZLIB_VERNUM     C                   X'1236'
+     D ZLIB_VERNUM     C                   X'1251'
+     D ZLIB_VER_MAJOR  C                   1
+     D ZLIB_VER_MINOR  C                   2
+     D ZLIB_VER_REVISION...
+     D                 C                   5
+     D ZLIB_VER_SUBREVISION...
+     D                 C                   0
       *
       *  Other equates.
       *
      D Z_NO_FLUSH      C                   0
+     D Z_PARTIAL_FLUSH...
+     D                 C                   1
      D Z_SYNC_FLUSH    C                   2
      D Z_FULL_FLUSH    C                   3
      D Z_FINISH        C                   4
      D Z_BLOCK         C                   5
+     D Z_TREES         C                   6
       *
      D Z_OK            C                   0
      D Z_STREAM_END    C                   1
@@ -72,6 +81,7 @@
      D z_streamp       S               *                                        Stream struct ptr
      D gzFile          S               *                                        File pointer
      D z_off_t         S             10i 0                                      Stream offsets
+     D z_off64_t       S             20i 0                                      Stream offsets
       *
       **************************************************************************
       *                               Structures
@@ -122,20 +132,36 @@
      D  source                    32767    const options(*varsize)              Source buffer
      D  sourceLen                    10U 0 value                                Source length
       *
+      /if not defined(LARGE_FILES)
      D gzopen          PR                  extproc('gzopen')
      D                                     like(gzFile)
      D  path                           *   value options(*string)               File pathname
      D  mode                           *   value options(*string)               Open mode
+      /else
+     D gzopen          PR                  extproc('gzopen64')
+     D                                     like(gzFile)
+     D  path                           *   value options(*string)               File pathname
+     D  mode                           *   value options(*string)               Open mode
+      *
+     D gzopen64        PR                  extproc('gzopen64')
+     D                                     like(gzFile)
+     D  path                           *   value options(*string)               File pathname
+     D  mode                           *   value options(*string)               Open mode
+      /endif
       *
      D gzdopen         PR                  extproc('gzdopen')
      D                                     like(gzFile)
-     D  fd                           10i 0 value                                File descriptor
+     D  fd                           10I 0 value                                File descriptor
      D  mode                           *   value options(*string)               Open mode
       *
+     D gzbuffer        PR            10I 0 extproc('gzbuffer')
+     D  file                               value like(gzFile)                   File pointer
+     D  size                         10U 0 value
+      *
      D gzsetparams     PR            10I 0 extproc('gzsetparams')
      D  file                               value like(gzFile)                   File pointer
      D  level                        10I 0 value
-     D  strategy                     10i 0 value
+     D  strategy                     10I 0 value
       *
      D gzread          PR            10I 0 extproc('gzread')
      D  file                               value like(gzFile)                   File pointer
@@ -160,20 +186,64 @@
      D  file                               value like(gzFile)                   File pointer
      D  flush                        10I 0 value                                Type of flush
       *
+      /if not defined(LARGE_FILES)
      D gzseek          PR                  extproc('gzseek')
      D                                     like(z_off_t)
      D  file                               value like(gzFile)                   File pointer
      D  offset                             value like(z_off_t)                  Offset
      D  whence                       10i 0 value                                Origin
+      /else
+     D gzseek          PR                  extproc('gzseek64')
+     D                                     like(z_off_t)
+     D  file                               value like(gzFile)                   File pointer
+     D  offset                             value like(z_off_t)                  Offset
+     D  whence                       10i 0 value                                Origin
+      *
+     D gzseek64        PR                  extproc('gzseek64')
+     D                                     like(z_off64_t)
+     D  file                               value like(gzFile)                   File pointer
+     D  offset                             value like(z_off64_t)                Offset
+     D  whence                       10i 0 value                                Origin
+      /endif
       *
      D gzrewind        PR            10i 0 extproc('gzrewind')
      D  file                               value like(gzFile)                   File pointer
       *
+      /if not defined(LARGE_FILES)
      D gztell          PR                  extproc('gztell')
      D                                     like(z_off_t)
      D  file                               value like(gzFile)                   File pointer
+      /else
+     D gztell          PR                  extproc('gztell64')
+     D                                     like(z_off_t)
+     D  file                               value like(gzFile)                   File pointer
+      *
+     D gztell64        PR                  extproc('gztell64')
+     D                                     like(z_off64_t)
+     D  file                               value like(gzFile)                   File pointer
+      /endif
+      *
+      /if not defined(LARGE_FILES)
+     D gzoffset        PR                  extproc('gzoffset')
+     D                                     like(z_off_t)
+     D  file                               value like(gzFile)                   File pointer
+      /else
+     D gzoffset        PR                  extproc('gzoffset64')
+     D                                     like(z_off_t)
+     D  file                               value like(gzFile)                   File pointer
+      *
+     D gzoffset64      PR                  extproc('gzoffset64')
+     D                                     like(z_off64_t)
+     D  file                               value like(gzFile)                   File pointer
+      /endif
       *
      D gzeof           PR            10i 0 extproc('gzeof')
+     D  file                               value like(gzFile)                   File pointer
+      *
+     D gzclose_r       PR            10i 0 extproc('gzclose_r')
+     D  file                               value like(gzFile)                   File pointer
+      *
+     D gzclose_w       PR            10i 0 extproc('gzclose_w')
      D  file                               value like(gzFile)                   File pointer
       *
      D gzclose         PR            10i 0 extproc('gzclose')
@@ -253,6 +323,11 @@
      D  strm                               like(z_stream)                       Compression stream
      D  sourcelen                    10U 0 value                                Compression level
       *
+     D deflatePending  PR            10I 0 extproc('deflatePending')            Change level & strat
+     D  strm                               like(z_stream)                       Compression stream
+     D  pending                      10U 0                                      Pending bytes
+     D  bits                         10I 0                                      Pending bits
+      *
      D deflatePrime    PR            10I 0 extproc('deflatePrime')              Change level & strat
      D  strm                               like(z_stream)                       Compression stream
      D  bits                         10I 0 value                                Number of bits to insert
@@ -278,6 +353,18 @@
      D  source                             like(z_stream)                       Source stream
       *
      D inflateReset    PR            10I 0 extproc('inflateReset')              End and init. stream
+     D  strm                               like(z_stream)                       Expansion stream
+      *
+     D inflateReset2   PR            10I 0 extproc('inflateReset2')             End and init. stream
+     D  strm                               like(z_stream)                       Expansion stream
+     D  windowBits                   10I 0 value                                Log2(buffer size)
+      *
+     D inflatePrime    PR            10I 0 extproc('inflatePrime')              Insert bits
+     D  strm                               like(z_stream)                       Expansion stream
+     D  bits                         10I 0 value                                Bit count
+     D  value                        10I 0 value                                Bits to insert
+      *
+     D inflateMark     PR            10I 0 extproc('inflateMark')               Get inflate info
      D  strm                               like(z_stream)                       Expansion stream
       *
      D inflateBackInit...
@@ -328,4 +415,9 @@
       *
      D get_crc_table   PR              *   extproc('get_crc_table')             Ptr to ulongs
       *
+     D inflateUndermine...
+     D                 PR            10I 0 extproc('inflateUndermine')
+     D  strm                               like(z_stream)                       Expansion stream
+     D  arg                          10I 0 value                                Error code
+      *
       /endif

configure

@@ -13,23 +13,49 @@
 # If you have problems, try without defining CC and CFLAGS before reporting
 # an error.
 
+if [ -n "${CHOST}" ]; then
+    uname="`echo "${CHOST}" | sed -e 's/^[^-]*-\([^-]*\)$/\1/' -e 's/^[^-]*-[^-]*-\([^-]*\)$/\1/' -e 's/^[^-]*-[^-]*-\([^-]*\)-.*$/\1/'`"
+    CROSS_PREFIX="${CHOST}-"
+fi
+
 STATICLIB=libz.a
-LDFLAGS="${LDFLAGS} -L. ${STATICLIB}"
 VER=`sed -n -e '/VERSION "/s/.*"\(.*\)".*/\1/p' < zlib.h`
-VER3=`sed -n -e '/VERSION "/s/.*"\([0-9]*\\.[0-9]*\\.[0-9]*\)\\..*/\1/p' < zlib.h`
+VER3=`sed -n -e '/VERSION "/s/.*"\([0-9]*\\.[0-9]*\\.[0-9]*\).*/\1/p' < zlib.h`
 VER2=`sed -n -e '/VERSION "/s/.*"\([0-9]*\\.[0-9]*\)\\..*/\1/p' < zlib.h`
 VER1=`sed -n -e '/VERSION "/s/.*"\([0-9]*\)\\..*/\1/p' < zlib.h`
-AR=${AR-"ar"}
+if "${CROSS_PREFIX}ar" --version >/dev/null 2>/dev/null || test $? -lt 126; then
+    AR=${AR-"${CROSS_PREFIX}ar"}
+    test -n "${CROSS_PREFIX}" && echo Using ${AR}
+else
+    AR=${AR-"ar"}
+    test -n "${CROSS_PREFIX}" && echo Using ${AR}
+fi
 AR_RC="${AR} rc"
-RANLIB=${RANLIB-"ranlib"}
+if "${CROSS_PREFIX}ranlib" --version >/dev/null 2>/dev/null || test $? -lt 126; then
+    RANLIB=${RANLIB-"${CROSS_PREFIX}ranlib"}
+    test -n "${CROSS_PREFIX}" && echo Using ${RANLIB}
+else
+    RANLIB=${RANLIB-"ranlib"}
+fi
+if "${CROSS_PREFIX}nm" --version >/dev/null 2>/dev/null || test $? -lt 126; then
+    NM=${NM-"${CROSS_PREFIX}nm"}
+    test -n "${CROSS_PREFIX}" && echo Using ${NM}
+else
+    NM=${NM-"nm"}
+fi
+LDCONFIG=${LDCONFIG-"ldconfig"}
+LDSHAREDLIBC="${LDSHAREDLIBC--lc}"
+ARCHS=
 prefix=${prefix-/usr/local}
 exec_prefix=${exec_prefix-'${prefix}'}
 libdir=${libdir-'${exec_prefix}/lib'}
+sharedlibdir=${sharedlibdir-'${libdir}'}
 includedir=${includedir-'${prefix}/include'}
 mandir=${mandir-'${prefix}/share/man'}
 shared_ext='.so'
 shared=1
 zprefix=0
+build64=0
 gcc=0
 old_cc="$CC"
 old_cflags="$CFLAGS"
@@ -39,14 +65,16 @@ do
 case "$1" in
     -h* | --help)
       echo 'usage:'
-      echo '  configure [--shared] [--prefix=PREFIX]  [--exec_prefix=EXPREFIX]'
+      echo '  configure [--zprefix] [--prefix=PREFIX]  [--eprefix=EXPREFIX]'
-      echo '     [--libdir=LIBDIR] [--includedir=INCLUDEDIR] [--zprefix]'
+      echo '    [--static] [--64] [--libdir=LIBDIR] [--sharedlibdir=LIBDIR]'
+      echo '    [--includedir=INCLUDEDIR] [--archs="-arch i386 -arch x86_64"]'
         exit 0 ;;
-    -p*=* | --prefix=*) prefix=`echo $1 | sed 's/[-a-z_]*=//'`; shift ;;
+    -p*=* | --prefix=*) prefix=`echo $1 | sed 's/.*=//'`; shift ;;
-    -e*=* | --eprefix=*) exec_prefix=`echo $1 | sed 's/[-a-z_]*=//'`; shift ;;
+    -e*=* | --eprefix=*) exec_prefix=`echo $1 | sed 's/.*=//'`; shift ;;
-    -l*=* | --libdir=*) libdir=`echo $1 | sed 's/[-a-z_]*=//'`; shift ;;
+    -l*=* | --libdir=*) libdir=`echo $1 | sed 's/.*=//'`; shift ;;
-    -i*=* | --includedir=*) includedir=`echo $1 | sed 's/[-a-z_]*=//'`;shift ;;
+    --sharedlibdir=*) sharedlibdir=`echo $1 | sed 's/.*=//'`; shift ;;
-    -u*=* | --uname=*) uname=`echo $1 | sed 's/[-a-z_]*=//'`;shift ;;
+    -i*=* | --includedir=*) includedir=`echo $1 | sed 's/.*=//'`;shift ;;
+    -u*=* | --uname=*) uname=`echo $1 | sed 's/.*=//'`;shift ;;
     -p* | --prefix) prefix="$2"; shift; shift ;;
     -e* | --eprefix) exec_prefix="$2"; shift; shift ;;
     -l* | --libdir) libdir="$2"; shift; shift ;;
@@ -54,6 +82,8 @@ case "$1" in
     -s* | --shared | --enable-shared) shared=1; shift ;;
     -t | --static) shared=0; shift ;;
     -z* | --zprefix) zprefix=1; shift ;;
+    -6* | --64) build64=1; shift ;;
+    -a*=* | --archs=*) ARCHS=`echo $1 | sed 's/.*=//'`; shift ;;
     --sysconfdir=*) echo "ignored option: --sysconfdir"; shift ;;
     --localstatedir=*) echo "ignored option: --localstatedir"; shift ;;
     *) echo "unknown option: $1"; echo "$0 --help for help"; exit 1 ;;
@@ -66,18 +96,26 @@ extern int getchar();
 int hello() {return getchar();}
 EOF
 
-test -z "$CC" && echo Checking for gcc...
+test -z "$CC" && echo Checking for ${CROSS_PREFIX}gcc...
-cc=${CC-gcc}
+cc=${CC-${CROSS_PREFIX}gcc}
 cflags=${CFLAGS-"-O3"}
 # to force the asm version use: CFLAGS="-O3 -DASMV" ./configure
 case "$cc" in
   *gcc*) gcc=1 ;;
 esac
+case `$cc -v 2>&1` in
+  *gcc*) gcc=1 ;;
+esac
 
 if test "$gcc" -eq 1 && ($cc -c $cflags $test.c) 2>/dev/null; then
   CC="$cc"
-  SFLAGS="${CFLAGS-"-O3"} -fPIC"
+  CFLAGS="${CFLAGS--O3} ${ARCHS}"
-  CFLAGS="${CFLAGS-"-O3"}"
+  SFLAGS="${CFLAGS--O3} -fPIC"
+  LDFLAGS="${LDFLAGS} ${ARCHS}"
+  if test $build64 -eq 1; then
+    CFLAGS="${CFLAGS} -m64"
+    SFLAGS="${SFLAGS} -m64"
+  fi
   if test "${ZLIBGCCWARN}" = "YES"; then
     CFLAGS="${CFLAGS} -Wall -Wextra -pedantic"
   fi
@@ -85,9 +123,18 @@ if test "$gcc" -eq 1 && ($cc -c $cflags $test.c) 2>/dev/null; then
     uname=`(uname -s || echo unknown) 2>/dev/null`
   fi
   case "$uname" in
-  Linux | linux | GNU | GNU/*) LDSHARED=${LDSHARED-"$cc -shared -Wl,-soname,libz.so.1,--version-script,zlib.map"} ;;
+  Linux* | linux* | GNU | GNU/* | *BSD | *bsd* | DragonFly | solaris*)
-  CYGWIN* | Cygwin* | cygwin* | OS/2* )
+        LDSHARED=${LDSHARED-"$cc -shared -Wl,-soname,libz.so.1,--version-script,zlib.map"} ;;
-             EXE='.exe' ;;
+  CYGWIN* | Cygwin* | cygwin* | OS/2*)
+        EXE='.exe' ;;
+  MINGW* | mingw*)
+# temporary bypass
+        rm -f $test.[co] $test $test$shared_ext
+        echo "Please use win32/Makefile.gcc instead."
+        exit 1
+        LDSHARED=${LDSHARED-"$cc -shared"}
+        LDSHAREDLIBC=""
+        EXE='.exe' ;;
   QNX*)  # This is for QNX6. I suppose that the QNX rule below is for QNX2,QNX4
          # (alain.bonnefoy@icbt.com)
                  LDSHARED=${LDSHARED-"$cc -shared -Wl,-hlibz.so.1"} ;;
@@ -101,16 +148,20 @@ if test "$gcc" -eq 1 && ($cc -c $cflags $test.c) 2>/dev/null; then
                  shared_ext='.sl'
                  SHAREDLIB='libz.sl' ;;
          esac ;;
-  Darwin*)   shared_ext='.dylib'
+  Darwin* | darwin*)
+             shared_ext='.dylib'
              SHAREDLIB=libz$shared_ext
              SHAREDLIBV=libz.$VER$shared_ext
              SHAREDLIBM=libz.$VER1$shared_ext
-             LDSHARED=${LDSHARED-"$cc -dynamiclib -install_name $libdir/$SHAREDLIBM -compatibility_version $VER1 -current_version $VER3"} ;;
+             LDSHARED=${LDSHARED-"$cc -dynamiclib -install_name $libdir/$SHAREDLIBM -compatibility_version $VER1 -current_version $VER3"}
+             AR="libtool"
+             AR_RC="${AR} -o" ;;
   *)             LDSHARED=${LDSHARED-"$cc -shared"} ;;
   esac
 else
   # find system name and corresponding cc options
   CC=${CC-cc}
+  gcc=0
   if test -z "$uname"; then
     uname=`(uname -sr || echo unknown) 2>/dev/null`
   fi
@@ -145,7 +196,8 @@ else
   SCO_SV\ 3.2*) SFLAGS=${CFLAGS-"-O3 -dy -KPIC "}
              CFLAGS=${CFLAGS-"-O3"}
              LDSHARED=${LDSHARED-"cc -dy -KPIC -G"} ;;
-  SunOS\ 5*) LDSHARED=${LDSHARED-"cc -G"}
+  SunOS\ 5* | solaris*)
+         LDSHARED=${LDSHARED-"cc -G"}
          case `(uname -m || echo unknown) 2>/dev/null` in
          i86*)
              SFLAGS=${CFLAGS-"-xpentium -fast -KPIC -R."}
@@ -191,7 +243,7 @@ if test $shared -eq 1; then
   echo Checking for shared library support...
   # we must test in two steps (cc then ld), required at least on SunOS 4.x
   if test "`($CC -w -c $SFLAGS $test.c) 2>&1`" = "" &&
-     test "`($LDSHARED -o $test$shared_ext $test.o) 2>&1`" = ""; then
+     test "`($LDSHARED $SFLAGS -o $test$shared_ext $test.o) 2>&1`" = ""; then
     echo Building shared library $SHAREDLIBV with $CC.
   elif test -z "$old_cc" -a -z "$old_cflags"; then
     echo No shared library support.
@@ -199,8 +251,8 @@ if test $shared -eq 1; then
   else
     echo Tested $CC -w -c $SFLAGS $test.c
     $CC -w -c $SFLAGS $test.c
-    echo Tested $LDSHARED -o $test$shared_ext $test.o
+    echo Tested $LDSHARED $SFLAGS -o $test$shared_ext $test.o
-    $LDSHARED -o $test$shared_ext $test.o
+    $LDSHARED $SFLAGS -o $test$shared_ext $test.o
     echo 'No shared library support; try without defining CC and CFLAGS'
     shared=0;
   fi
@@ -209,20 +261,15 @@ if test $shared -eq 0; then
   LDSHARED="$CC"
   ALL="static"
   TEST="all teststatic"
+  SHAREDLIB=""
+  SHAREDLIBV=""
+  SHAREDLIBM=""
   echo Building static library $STATICLIB version $VER with $CC.
 else
   ALL="static shared"
   TEST="all teststatic testshared"
 fi
 
-cat > zlibdefs.h << EOF
-/* zlibdefs.h -- compile-time definitions for the zlib compression library
- * Copyright (C) 1995-2006 Jean-loup Gailly.
- * For conditions of distribution and use, see copyright notice in zlib.h
- */
-
-EOF
-
 cat > $test.c <<EOF
 #include <sys/types.h>
 off64_t dummy = 0;
@@ -252,28 +299,34 @@ EOF
   fi
 fi
 
+cp -p zconf.h.in zconf.h
+
 cat > $test.c <<EOF
 #include <unistd.h>
 int main() { return 0; }
 EOF
 if test "`($CC -c $CFLAGS $test.c) 2>&1`" = ""; then
-  cat >> zlibdefs.h <<EOF
+  sed < zconf.h "/^#ifdef HAVE_UNISTD_H.* may be/s/def HAVE_UNISTD_H\(.*\) may be/ 1\1 was/" > zconf.temp.h
-#include <sys/types.h>	/* for off_t */
+  mv zconf.temp.h zconf.h
-#include <unistd.h>	/* for SEEK_* and off_t */
-#ifdef VMS
-#  include <unixio.h>	/* for off_t */
-#endif
-#ifndef z_off_t
-#  define z_off_t off_t
-#endif
-EOF
   echo "Checking for unistd.h... Yes."
 else
   echo "Checking for unistd.h... No."
 fi
 
+cat > $test.c <<EOF
+#include <stdarg.h>
+int main() { return 0; }
+EOF
+if test "`($CC -c $CFLAGS $test.c) 2>&1`" = ""; then
+  sed < zconf.h "/^#ifdef HAVE_STDARG_H.* may be/s/def HAVE_STDARG_H\(.*\) may be/ 1\1 was/" > zconf.temp.h
+  mv zconf.temp.h zconf.h
+  echo "Checking for stdarg.h... Yes."
+else
+  echo "Checking for stdarg.h... No."
+fi
+
 if test $zprefix -eq 1; then
-  sed < zconf.h "/#ifdef Z_PREFIX/s/def Z_PREFIX/ 1/" > zconf.temp.h
+  sed < zconf.h "/#ifdef Z_PREFIX.* may be/s/def Z_PREFIX\(.*\) may be/ 1\1 was/" > zconf.temp.h
   mv zconf.temp.h zconf.h
   echo "Using z_ prefix on all symbols."
 fi
@@ -300,7 +353,7 @@ if test "`($CC -c $CFLAGS $test.c) 2>&1`" = ""; then
 #include <stdio.h>
 #include <stdarg.h>
 
-int mytest(char *fmt, ...)
+int mytest(const char *fmt, ...)
 {
   char buf[20];
   va_list ap;
@@ -316,7 +369,6 @@ int main()
   return (mytest("Hello%d\n", 1));
 }
 EOF
-
   if test "`($CC $CFLAGS -o $test $test.c) 2>&1`" = ""; then
     echo "Checking for vsnprintf() in stdio.h... Yes."
 
@@ -324,7 +376,7 @@ EOF
 #include <stdio.h>
 #include <stdarg.h>
 
-int mytest(char *fmt, ...)
+int mytest(const char *fmt, ...)
 {
   int n;
   char buf[20];
@@ -364,7 +416,7 @@ EOF
 #include <stdio.h>
 #include <stdarg.h>
 
-int mytest(char *fmt, ...)
+int mytest(const char *fmt, ...)
 {
   int n;
   char buf[20];
@@ -479,22 +531,32 @@ EOF
   fi
 fi
 
-cat >$test.c <<EOF
+if test "$gcc" -eq 1; then
-#include <errno.h>
+  cat > $test.c <<EOF
-int main() { return 0; }
+#if ((__GNUC__-0) * 10 + __GNUC_MINOR__-0 >= 33)
+#  define ZLIB_INTERNAL __attribute__((visibility ("hidden")))
+#else
+#  define ZLIB_INTERNAL
+#endif
+int ZLIB_INTERNAL foo;
+int main()
+{
+  return 0;
+}
 EOF
-if test "`($CC -c $CFLAGS $test.c) 2>&1`" = ""; then
+  if test "`($CC -c $CFLAGS $test.c) 2>&1`" = ""; then
-  echo "Checking for errno.h... Yes."
+    echo "Checking for attribute(visibility) support... Yes."
-else
+  else
-  echo "Checking for errno.h... No."
+    CFLAGS="$CFLAGS -DNO_VIZ"
-  CFLAGS="$CFLAGS -DNO_ERRNO_H"
+    SFLAGS="$SFLAGS -DNO_VIZ"
-  SFLAGS="$SFLAGS -DNO_ERRNO_H"
+    echo "Checking for attribute(visibility) support... No."
+  fi
 fi
 
 CPP=${CPP-"$CC -E"}
 case $CFLAGS in
   *ASMV*)
-    if test "`nm $test.o | grep _hello`" = ""; then
+    if test "`$NM $test.o | grep _hello`" = ""; then
       CPP="$CPP -DNO_UNDERLINE"
       echo Checking for underline in external names... No.
     else
@@ -518,10 +580,13 @@ sed < Makefile.in "
 /^SHAREDLIBM *=/s#=.*#=$SHAREDLIBM#
 /^AR *=/s#=.*#=$AR_RC#
 /^RANLIB *=/s#=.*#=$RANLIB#
+/^LDCONFIG *=/s#=.*#=$LDCONFIG#
+/^LDSHAREDLIBC *=/s#=.*#=$LDSHAREDLIBC#
 /^EXE *=/s#=.*#=$EXE#
 /^prefix *=/s#=.*#=$prefix#
 /^exec_prefix *=/s#=.*#=$exec_prefix#
 /^libdir *=/s#=.*#=$libdir#
+/^sharedlibdir *=/s#=.*#=$sharedlibdir#
 /^includedir *=/s#=.*#=$includedir#
 /^mandir *=/s#=.*#=$mandir#
 /^all: */s#:.*#: $ALL#
@@ -543,6 +608,7 @@ sed < zlib.pc.in "
 /^prefix *=/s#=.*#=$prefix#
 /^exec_prefix *=/s#=.*#=$exec_prefix#
 /^libdir *=/s#=.*#=$libdir#
+/^sharedlibdir *=/s#=.*#=$sharedlibdir#
 /^includedir *=/s#=.*#=$includedir#
 /^mandir *=/s#=.*#=$mandir#
 /^LDFLAGS *=/s#=.*#=$LDFLAGS#

contrib/README.contrib

@@ -12,7 +12,6 @@ amd64/      by Mikhail Teterin <mi@ALDAN.algebra.com>
         asm code for AMD64
         See patch at http://www.freebsd.org/cgi/query-pr.cgi?pr=bin/96393
 
-asm586/
 asm686/     by Brian Raiter <breadbox@muppetlabs.com>
         asm code for Pentium and PPro/PII, using the AT&T (GNU as) syntax
         See http://www.muppetlabs.com/~breadbox/software/assembly.html
@@ -26,6 +25,10 @@ delphi/     by Cosmin Truta <cosmint@cs.ubbcluj.ro>
 dotzlib/    by Henrik Ravn <henrik@ravn.com>
         Support for Microsoft .Net and Visual C++ .Net
 
+gcc_gvmat64/by Gilles Vollant <info@winimage.com>
+        GCC Version of x86 64-bit (AMD64 and Intel EM64t) code for x64
+        assembler to replace longest_match() and inflate_fast()
+
 infback9/   by Mark Adler <madler@alumni.caltech.edu>
         Unsupported diffs to infback to decode the deflate64 format
 
@@ -42,21 +45,19 @@ iostream3/  by Ludwig Schwardt <schwardt@sun.ac.za>
             and Kevin Ruland <kevin@rodin.wustl.edu>
         Yet another C++ I/O streams interface
 
-masm686/    by Dan Higdon <hdan@kinesoft.com>
-            and Chuck Walbourn <chuckw@kinesoft.com>
-        asm code for Pentium Pro/PII, using the MASM syntax
-
 masmx64/    by Gilles Vollant <info@winimage.com>
-	x86 64-bit (AMD64 and Intel EM64t) code for x64 assembler to
+        x86 64-bit (AMD64 and Intel EM64t) code for x64 assembler to
-	replace longest_match() and inflate_fast()
+        replace longest_match() and inflate_fast(),  also masm x86
+        64-bits translation of Chris Anderson inflate_fast()
 
 masmx86/    by Gilles Vollant <info@winimage.com>
         x86 asm code to replace longest_match() and inflate_fast(),
-        for Visual C++ and MASM
+        for Visual C++ and MASM (32 bits).
+        Based on Brian Raiter (asm686) and Chris Anderson (inflate86)
 
 minizip/    by Gilles Vollant <info@winimage.com>
         Mini zip and unzip based on zlib
-	Includes Zip64 support by Mathias Svensson <mathias@result42.com>
+        Includes Zip64 support by Mathias Svensson <mathias@result42.com>
         See http://www.winimage.com/zLibDll/unzip.html
 
 pascal/     by Bob Dellaca <bobdl@xtra.co.nz> et al.

contrib/amd64/amd64-match.S

@@ -52,14 +52,73 @@
 #define save_r13        (64-LocalVarsSize)(%rsp)
 #define save_r15        (80-LocalVarsSize)(%rsp)
 
+
+.globl	match_init, longest_match
+
 /*
  * On AMD64 the first argument of a function (in our case -- the pointer to
  * deflate_state structure) is passed in %rdi, hence our offsets below are
  * all off of that.
  */
+
+/* you can check the structure offset by running
+
+#include <stdlib.h>
+#include <stdio.h>
+#include "deflate.h"
+
+void print_depl()
+{
+deflate_state ds;
+deflate_state *s=&ds;
+printf("size pointer=%u\n",(int)sizeof(void*));
+
+printf("#define dsWSize         (%3u)(%%rdi)\n",(int)(((char*)&(s->w_size))-((char*)s)));
+printf("#define dsWMask         (%3u)(%%rdi)\n",(int)(((char*)&(s->w_mask))-((char*)s)));
+printf("#define dsWindow        (%3u)(%%rdi)\n",(int)(((char*)&(s->window))-((char*)s)));
+printf("#define dsPrev          (%3u)(%%rdi)\n",(int)(((char*)&(s->prev))-((char*)s)));
+printf("#define dsMatchLen      (%3u)(%%rdi)\n",(int)(((char*)&(s->match_length))-((char*)s)));
+printf("#define dsPrevMatch     (%3u)(%%rdi)\n",(int)(((char*)&(s->prev_match))-((char*)s)));
+printf("#define dsStrStart      (%3u)(%%rdi)\n",(int)(((char*)&(s->strstart))-((char*)s)));
+printf("#define dsMatchStart    (%3u)(%%rdi)\n",(int)(((char*)&(s->match_start))-((char*)s)));
+printf("#define dsLookahead     (%3u)(%%rdi)\n",(int)(((char*)&(s->lookahead))-((char*)s)));
+printf("#define dsPrevLen       (%3u)(%%rdi)\n",(int)(((char*)&(s->prev_length))-((char*)s)));
+printf("#define dsMaxChainLen   (%3u)(%%rdi)\n",(int)(((char*)&(s->max_chain_length))-((char*)s)));
+printf("#define dsGoodMatch     (%3u)(%%rdi)\n",(int)(((char*)&(s->good_match))-((char*)s)));
+printf("#define dsNiceMatch     (%3u)(%%rdi)\n",(int)(((char*)&(s->nice_match))-((char*)s)));
+}
+
+*/
+
+
+/*
+  to compile for XCode 3.2 on MacOSX x86_64
+  - run "gcc -g -c -DXCODE_MAC_X64_STRUCTURE amd64-match.S"
+ */
+
+
+#ifndef CURRENT_LINX_XCODE_MAC_X64_STRUCTURE
+#define dsWSize		( 68)(%rdi)
+#define dsWMask		( 76)(%rdi)
+#define dsWindow	( 80)(%rdi)
+#define dsPrev		( 96)(%rdi)
+#define dsMatchLen	(144)(%rdi)
+#define dsPrevMatch	(148)(%rdi)
+#define dsStrStart	(156)(%rdi)
+#define dsMatchStart	(160)(%rdi)
+#define dsLookahead	(164)(%rdi)
+#define dsPrevLen	(168)(%rdi)
+#define dsMaxChainLen	(172)(%rdi)
+#define dsGoodMatch	(188)(%rdi)
+#define dsNiceMatch	(192)(%rdi)
+
+#else 
+
 #ifndef STRUCT_OFFSET
 #	define STRUCT_OFFSET	(0)
 #endif
+
+
 #define dsWSize		( 56 + STRUCT_OFFSET)(%rdi)
 #define dsWMask		( 64 + STRUCT_OFFSET)(%rdi)
 #define dsWindow	( 72 + STRUCT_OFFSET)(%rdi)
@@ -74,7 +133,10 @@
 #define dsGoodMatch	(180 + STRUCT_OFFSET)(%rdi)
 #define dsNiceMatch	(184 + STRUCT_OFFSET)(%rdi)
 
-.globl	match_init, longest_match
+#endif
+
+
+
 
 .text
 
@@ -222,7 +284,9 @@ LoopEntry:	cmpw	-1(%windowbestlen, %curmatch), %scanendw
  * straightforward "rep cmpsb" would not drastically degrade
  * performance -- unrolling it, for example, makes no difference.
  */
+
 #undef USE_SSE	/* works, but is 6-7% slower, than non-SSE... */
+
 LoopCmps:
 #ifdef USE_SSE
 		/* Preload the SSE registers */
@@ -244,29 +308,55 @@ LoopCmps:
 		notw	%ax
 		bsfw	%ax, %ax
 		jnz	LeaveLoopCmps
-		add	$16, %rdx
+		
+		/* this is the only iteration of the loop with a possibility of having
+		   incremented rdx by 0x108 (each loop iteration add 16*4 = 0x40 
+		   and (0x40*4)+8=0x108 */
+		add	$8, %rdx
+		jz LenMaximum
+		add	$8, %rdx
+
+		
 		pmovmskb %xmm3, %rax
 		notw	%ax
 		bsfw	%ax, %ax
 		jnz	LeaveLoopCmps
+		
+		
 		add	$16, %rdx
+
+
 		pmovmskb %xmm5, %rax
 		notw	%ax
 		bsfw	%ax, %ax
 		jnz	LeaveLoopCmps
+		
 		add	$16, %rdx
+
+
 		pmovmskb %xmm7, %rax
 		notw	%ax
 		bsfw	%ax, %ax
 		jnz	LeaveLoopCmps
+		
 		add	$16, %rdx
+		
 		jmp	LoopCmps
 LeaveLoopCmps:	add	%rax, %rdx
 #else
 		mov	(%windowbestlen, %rdx), %rax
 		xor	(%prev, %rdx), %rax
 		jnz	LeaveLoopCmps
-		add	$8, %rdx
+		
+		mov	8(%windowbestlen, %rdx), %rax
+		xor	8(%prev, %rdx), %rax
+		jnz	LeaveLoopCmps8
+
+		mov	16(%windowbestlen, %rdx), %rax
+		xor	16(%prev, %rdx), %rax
+		jnz	LeaveLoopCmps16
+				
+		add	$24, %rdx
 		jnz	LoopCmps
 		jmp	LenMaximum
 #	if 0
@@ -274,10 +364,15 @@ LeaveLoopCmps:	add	%rax, %rdx
  * This three-liner is tantalizingly simple, but bsf is a slow instruction,
  * and the complicated alternative down below is quite a bit faster. Sad...
  */
+
 LeaveLoopCmps:	bsf	%rax, %rax /* find the first non-zero bit */
 		shrl	$3, %eax /* divide by 8 to get the byte */
 		add	%rax, %rdx
 #	else
+LeaveLoopCmps16:
+		add	$8, %rdx
+LeaveLoopCmps8:
+		add	$8, %rdx
 LeaveLoopCmps:	testl   $0xFFFFFFFF, %eax /* Check the first 4 bytes */
 		jnz     Check16
 		add     $4, %rdx

contrib/asm586/README.586

@@ -1,43 +0,0 @@
-This is a patched version of zlib modified to use
-Pentium-optimized assembly code in the deflation algorithm. The files
-changed/added by this patch are:
-
-README.586
-match.S
-
-The effectiveness of these modifications is a bit marginal, as the the
-program's bottleneck seems to be mostly L1-cache contention, for which
-there is no real way to work around without rewriting the basic
-algorithm. The speedup on average is around 5-10% (which is generally
-less than the amount of variance between subsequent executions).
-However, when used at level 9 compression, the cache contention can
-drop enough for the assembly version to achieve 10-20% speedup (and
-sometimes more, depending on the amount of overall redundancy in the
-files). Even here, though, cache contention can still be the limiting
-factor, depending on the nature of the program using the zlib library.
-This may also mean that better improvements will be seen on a Pentium
-with MMX, which suffers much less from L1-cache contention, but I have
-not yet verified this.
-
-Note that this code has been tailored for the Pentium in particular,
-and will not perform well on the Pentium Pro (due to the use of a
-partial register in the inner loop).
-
-If you are using an assembler other than GNU as, you will have to
-translate match.S to use your assembler's syntax. (Have fun.)
-
-Brian Raiter
-breadbox@muppetlabs.com
-April, 1998
-
-
-Added for zlib 1.1.3:
-
-The patches come from
-http://www.muppetlabs.com/~breadbox/software/assembly.html
-
-To compile zlib with this asm file, copy match.S to the zlib directory
-then do:
-
-CFLAGS="-O3 -DASMV" ./configure
-make OBJA=match.o

contrib/asm586/match.S

@@ -1,364 +0,0 @@
-/* match.s -- Pentium-optimized version of longest_match()
- * Written for zlib 1.1.2
- * Copyright (C) 1998 Brian Raiter <breadbox@muppetlabs.com>
- *
- * This is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License.
- */
-
-#ifndef NO_UNDERLINE
-#define	match_init	_match_init
-#define	longest_match	_longest_match
-#endif
-
-#define	MAX_MATCH	(258)
-#define	MIN_MATCH	(3)
-#define	MIN_LOOKAHEAD	(MAX_MATCH + MIN_MATCH + 1)
-#define	MAX_MATCH_8	((MAX_MATCH + 7) & ~7)
-
-/* stack frame offsets */
-
-#define	wmask			0	/* local copy of s->wmask	*/
-#define	window			4	/* local copy of s->window	*/
-#define	windowbestlen		8	/* s->window + bestlen		*/
-#define	chainlenscanend		12	/* high word: current chain len	*/
-					/* low word: last bytes sought	*/
-#define	scanstart		16	/* first two bytes of string	*/
-#define	scanalign		20	/* dword-misalignment of string	*/
-#define	nicematch		24	/* a good enough match size	*/
-#define	bestlen			28	/* size of best match so far	*/
-#define	scan			32	/* ptr to string wanting match	*/
-
-#define	LocalVarsSize		(36)
-/*	saved ebx		36 */
-/*	saved edi		40 */
-/*	saved esi		44 */
-/*	saved ebp		48 */
-/*	return address		52 */
-#define	deflatestate		56	/* the function arguments	*/
-#define	curmatch		60
-
-/* Offsets for fields in the deflate_state structure. These numbers
- * are calculated from the definition of deflate_state, with the
- * assumption that the compiler will dword-align the fields. (Thus,
- * changing the definition of deflate_state could easily cause this
- * program to crash horribly, without so much as a warning at
- * compile time. Sigh.)
- */
-
-/* All the +zlib1222add offsets are due to the addition of fields
- *  in zlib in the deflate_state structure since the asm code was first written
- * (if you compile with zlib 1.0.4 or older, use "zlib1222add equ (-4)").
- * (if you compile with zlib between 1.0.5 and 1.2.2.1, use "zlib1222add equ 0").
- * if you compile with zlib 1.2.2.2 or later , use "zlib1222add equ 8").
- */
-
-#define zlib1222add		(8)
-
-#define	dsWSize			(36+zlib1222add)
-#define	dsWMask			(44+zlib1222add)
-#define	dsWindow		(48+zlib1222add)
-#define	dsPrev			(56+zlib1222add)
-#define	dsMatchLen		(88+zlib1222add)
-#define	dsPrevMatch		(92+zlib1222add)
-#define	dsStrStart		(100+zlib1222add)
-#define	dsMatchStart		(104+zlib1222add)
-#define	dsLookahead		(108+zlib1222add)
-#define	dsPrevLen		(112+zlib1222add)
-#define	dsMaxChainLen		(116+zlib1222add)
-#define	dsGoodMatch		(132+zlib1222add)
-#define	dsNiceMatch		(136+zlib1222add)
-
-
-.file "match.S"
-
-.globl	match_init, longest_match
-
-.text
-
-/* uInt longest_match(deflate_state *deflatestate, IPos curmatch) */
-
-longest_match:
-
-/* Save registers that the compiler may be using, and adjust %esp to	*/
-/* make room for our stack frame.					*/
-
-		pushl	%ebp
-		pushl	%edi
-		pushl	%esi
-		pushl	%ebx
-		subl	$LocalVarsSize, %esp
-
-/* Retrieve the function arguments. %ecx will hold cur_match		*/
-/* throughout the entire function. %edx will hold the pointer to the	*/
-/* deflate_state structure during the function's setup (before		*/
-/* entering the main loop).						*/
-
-		movl	deflatestate(%esp), %edx
-		movl	curmatch(%esp), %ecx
-
-/* if ((uInt)nice_match > s->lookahead) nice_match = s->lookahead;	*/
-
-		movl	dsNiceMatch(%edx), %eax
-		movl	dsLookahead(%edx), %ebx
-		cmpl	%eax, %ebx
-		jl	LookaheadLess
-		movl	%eax, %ebx
-LookaheadLess:	movl	%ebx, nicematch(%esp)
-
-/* register Bytef *scan = s->window + s->strstart;			*/
-
-		movl	dsWindow(%edx), %esi
-		movl	%esi, window(%esp)
-		movl	dsStrStart(%edx), %ebp
-		lea	(%esi,%ebp), %edi
-		movl	%edi, scan(%esp)
-
-/* Determine how many bytes the scan ptr is off from being		*/
-/* dword-aligned.							*/
-
-		movl	%edi, %eax
-		negl	%eax
-		andl	$3, %eax
-		movl	%eax, scanalign(%esp)
-
-/* IPos limit = s->strstart > (IPos)MAX_DIST(s) ?			*/
-/*     s->strstart - (IPos)MAX_DIST(s) : NIL;				*/
-
-		movl	dsWSize(%edx), %eax
-		subl	$MIN_LOOKAHEAD, %eax
-		subl	%eax, %ebp
-		jg	LimitPositive
-		xorl	%ebp, %ebp
-LimitPositive:
-
-/* unsigned chain_length = s->max_chain_length;				*/
-/* if (s->prev_length >= s->good_match) {				*/
-/*     chain_length >>= 2;						*/
-/* }									*/
-
-		movl	dsPrevLen(%edx), %eax
-		movl	dsGoodMatch(%edx), %ebx
-		cmpl	%ebx, %eax
-		movl	dsMaxChainLen(%edx), %ebx
-		jl	LastMatchGood
-		shrl	$2, %ebx
-LastMatchGood:
-
-/* chainlen is decremented once beforehand so that the function can	*/
-/* use the sign flag instead of the zero flag for the exit test.	*/
-/* It is then shifted into the high word, to make room for the scanend	*/
-/* scanend value, which it will always accompany.			*/
-
-		decl	%ebx
-		shll	$16, %ebx
-
-/* int best_len = s->prev_length;					*/
-
-		movl	dsPrevLen(%edx), %eax
-		movl	%eax, bestlen(%esp)
-
-/* Store the sum of s->window + best_len in %esi locally, and in %esi.	*/
-
-		addl	%eax, %esi
-		movl	%esi, windowbestlen(%esp)
-
-/* register ush scan_start = *(ushf*)scan;				*/
-/* register ush scan_end   = *(ushf*)(scan+best_len-1);			*/
-
-		movw	(%edi), %bx
-		movw	%bx, scanstart(%esp)
-		movw	-1(%edi,%eax), %bx
-		movl	%ebx, chainlenscanend(%esp)
-
-/* Posf *prev = s->prev;						*/
-/* uInt wmask = s->w_mask;						*/
-
-		movl	dsPrev(%edx), %edi
-		movl	dsWMask(%edx), %edx
-		mov	%edx, wmask(%esp)
-
-/* Jump into the main loop.						*/
-
-		jmp	LoopEntry
-
-.balign 16
-
-/* do {
- *     match = s->window + cur_match;
- *     if (*(ushf*)(match+best_len-1) != scan_end ||
- *         *(ushf*)match != scan_start) continue;
- *     [...]
- * } while ((cur_match = prev[cur_match & wmask]) > limit
- *          && --chain_length != 0);
- *
- * Here is the inner loop of the function. The function will spend the
- * majority of its time in this loop, and majority of that time will
- * be spent in the first ten instructions.
- *
- * Within this loop:
- * %ebx = chainlenscanend - i.e., ((chainlen << 16) | scanend)
- * %ecx = curmatch
- * %edx = curmatch & wmask
- * %esi = windowbestlen - i.e., (window + bestlen)
- * %edi = prev
- * %ebp = limit
- *
- * Two optimization notes on the choice of instructions:
- *
- * The first instruction uses a 16-bit address, which costs an extra,
- * unpairable cycle. This is cheaper than doing a 32-bit access and
- * zeroing the high word, due to the 3-cycle misalignment penalty which
- * would occur half the time. This also turns out to be cheaper than
- * doing two separate 8-bit accesses, as the memory is so rarely in the
- * L1 cache.
- *
- * The window buffer, however, apparently spends a lot of time in the
- * cache, and so it is faster to retrieve the word at the end of the
- * match string with two 8-bit loads. The instructions that test the
- * word at the beginning of the match string, however, are executed
- * much less frequently, and there it was cheaper to use 16-bit
- * instructions, which avoided the necessity of saving off and
- * subsequently reloading one of the other registers.
- */
-LookupLoop:
-							/* 1 U & V  */
-		movw	(%edi,%edx,2), %cx		/* 2 U pipe */
-		movl	wmask(%esp), %edx		/* 2 V pipe */
-		cmpl	%ebp, %ecx			/* 3 U pipe */
-		jbe	LeaveNow			/* 3 V pipe */
-		subl	$0x00010000, %ebx		/* 4 U pipe */
-		js	LeaveNow			/* 4 V pipe */
-LoopEntry:	movb	-1(%esi,%ecx), %al		/* 5 U pipe */
-		andl	%ecx, %edx			/* 5 V pipe */
-		cmpb	%bl, %al			/* 6 U pipe */
-		jnz	LookupLoop			/* 6 V pipe */
-		movb	(%esi,%ecx), %ah
-		cmpb	%bh, %ah
-		jnz	LookupLoop
-		movl	window(%esp), %eax
-		movw	(%eax,%ecx), %ax
-		cmpw	scanstart(%esp), %ax
-		jnz	LookupLoop
-
-/* Store the current value of chainlen.					*/
-
-		movl	%ebx, chainlenscanend(%esp)
-
-/* Point %edi to the string under scrutiny, and %esi to the string we	*/
-/* are hoping to match it up with. In actuality, %esi and %edi are	*/
-/* both pointed (MAX_MATCH_8 - scanalign) bytes ahead, and %edx is	*/
-/* initialized to -(MAX_MATCH_8 - scanalign).				*/
-
-		movl	window(%esp), %esi
-		movl	scan(%esp), %edi
-		addl	%ecx, %esi
-		movl	scanalign(%esp), %eax
-		movl	$(-MAX_MATCH_8), %edx
-		lea	MAX_MATCH_8(%edi,%eax), %edi
-		lea	MAX_MATCH_8(%esi,%eax), %esi
-
-/* Test the strings for equality, 8 bytes at a time. At the end,
- * adjust %edx so that it is offset to the exact byte that mismatched.
- *
- * We already know at this point that the first three bytes of the
- * strings match each other, and they can be safely passed over before
- * starting the compare loop. So what this code does is skip over 0-3
- * bytes, as much as necessary in order to dword-align the %edi
- * pointer. (%esi will still be misaligned three times out of four.)
- *
- * It should be confessed that this loop usually does not represent
- * much of the total running time. Replacing it with a more
- * straightforward "rep cmpsb" would not drastically degrade
- * performance.
- */
-LoopCmps:
-		movl	(%esi,%edx), %eax
-		movl	(%edi,%edx), %ebx
-		xorl	%ebx, %eax
-		jnz	LeaveLoopCmps
-		movl	4(%esi,%edx), %eax
-		movl	4(%edi,%edx), %ebx
-		xorl	%ebx, %eax
-		jnz	LeaveLoopCmps4
-		addl	$8, %edx
-		jnz	LoopCmps
-		jmp	LenMaximum
-LeaveLoopCmps4:	addl	$4, %edx
-LeaveLoopCmps:	testl	$0x0000FFFF, %eax
-		jnz	LenLower
-		addl	$2, %edx
-		shrl	$16, %eax
-LenLower:	subb	$1, %al
-		adcl	$0, %edx
-
-/* Calculate the length of the match. If it is longer than MAX_MATCH,	*/
-/* then automatically accept it as the best possible match and leave.	*/
-
-		lea	(%edi,%edx), %eax
-		movl	scan(%esp), %edi
-		subl	%edi, %eax
-		cmpl	$MAX_MATCH, %eax
-		jge	LenMaximum
-
-/* If the length of the match is not longer than the best match we	*/
-/* have so far, then forget it and return to the lookup loop.		*/
-
-		movl	deflatestate(%esp), %edx
-		movl	bestlen(%esp), %ebx
-		cmpl	%ebx, %eax
-		jg	LongerMatch
-		movl	chainlenscanend(%esp), %ebx
-		movl	windowbestlen(%esp), %esi
-		movl	dsPrev(%edx), %edi
-		movl	wmask(%esp), %edx
-		andl	%ecx, %edx
-		jmp	LookupLoop
-
-/*         s->match_start = cur_match;					*/
-/*         best_len = len;						*/
-/*         if (len >= nice_match) break;				*/
-/*         scan_end = *(ushf*)(scan+best_len-1);			*/
-
-LongerMatch:	movl	nicematch(%esp), %ebx
-		movl	%eax, bestlen(%esp)
-		movl	%ecx, dsMatchStart(%edx)
-		cmpl	%ebx, %eax
-		jge	LeaveNow
-		movl	window(%esp), %esi
-		addl	%eax, %esi
-		movl	%esi, windowbestlen(%esp)
-		movl	chainlenscanend(%esp), %ebx
-		movw	-1(%edi,%eax), %bx
-		movl	dsPrev(%edx), %edi
-		movl	%ebx, chainlenscanend(%esp)
-		movl	wmask(%esp), %edx
-		andl	%ecx, %edx
-		jmp	LookupLoop
-
-/* Accept the current string, with the maximum possible length.		*/
-
-LenMaximum:	movl	deflatestate(%esp), %edx
-		movl	$MAX_MATCH, bestlen(%esp)
-		movl	%ecx, dsMatchStart(%edx)
-
-/* if ((uInt)best_len <= s->lookahead) return (uInt)best_len;		*/
-/* return s->lookahead;							*/
-
-LeaveNow:
-		movl	deflatestate(%esp), %edx
-		movl	bestlen(%esp), %ebx
-		movl	dsLookahead(%edx), %eax
-		cmpl	%eax, %ebx
-		jg	LookaheadRet
-		movl	%ebx, %eax
-LookaheadRet:
-
-/* Restore the stack and return from whence we came.			*/
-
-		addl	$LocalVarsSize, %esp
-		popl	%ebx
-		popl	%esi
-		popl	%edi
-		popl	%ebp
-match_init:	ret

contrib/asm686/README.686

@@ -32,3 +32,20 @@ then do:
 
 CFLAGS="-O3 -DASMV" ./configure
 make OBJA=match.o
+
+
+Update:
+
+I've been ignoring these assembly routines for years, believing that
+gcc's generated code had caught up with it sometime around gcc 2.95
+and the major rearchitecting of the Pentium 4. However, I recently
+learned that, despite what I believed, this code still has some life
+in it. On the Pentium 4 and AMD64 chips, it continues to run about 8%
+faster than the code produced by gcc 4.1.
+
+In acknowledgement of its continuing usefulness, I've altered the
+license to match that of the rest of zlib. Share and Enjoy!
+
+Brian Raiter
+breadbox@muppetlabs.com
+April, 2007

contrib/asm686/match.S

@@ -1,9 +1,23 @@
-/* match.s -- Pentium-Pro-optimized version of longest_match()
+/* match.S -- x86 assembly version of the zlib longest_match() function.
- * Written for zlib 1.1.2
+ * Optimized for the Intel 686 chips (PPro and later).
- * Copyright (C) 1998 Brian Raiter <breadbox@muppetlabs.com>
  *
- * This is free software; you can redistribute it and/or modify it
+ * Copyright (C) 1998, 2007 Brian Raiter <breadbox@muppetlabs.com>
- * under the terms of the GNU General Public License.
+ *
+ * This software is provided 'as-is', without any express or implied
+ * warranty.  In no event will the author be held liable for any damages
+ * arising from the use of this software.
+ *
+ * Permission is granted to anyone to use this software for any purpose,
+ * including commercial applications, and to alter it and redistribute it
+ * freely, subject to the following restrictions:
+ *
+ * 1. The origin of this software must not be misrepresented; you must not
+ *    claim that you wrote the original software. If you use this software
+ *    in a product, an acknowledgment in the product documentation would be
+ *    appreciated but is not required.
+ * 2. Altered source versions must be plainly marked as such, and must not be
+ *    misrepresented as being the original software.
+ * 3. This notice may not be removed or altered from any source distribution.
  */
 
 #ifndef NO_UNDERLINE
@@ -69,17 +83,25 @@
 .text
 
 /* uInt longest_match(deflate_state *deflatestate, IPos curmatch) */
+.cfi_sections	.debug_frame
 
 longest_match:
 
+.cfi_startproc
 /* Save registers that the compiler may be using, and adjust %esp to	*/
 /* make room for our stack frame.					*/
 
 		pushl	%ebp
+		.cfi_def_cfa_offset 8
+		.cfi_offset ebp, -8
 		pushl	%edi
+		.cfi_def_cfa_offset 12
 		pushl	%esi
+		.cfi_def_cfa_offset 16
 		pushl	%ebx
+		.cfi_def_cfa_offset 20
 		subl	$LocalVarsSize, %esp
+		.cfi_def_cfa_offset LocalVarsSize+20
 
 /* Retrieve the function arguments. %ecx will hold cur_match		*/
 /* throughout the entire function. %edx will hold the pointer to the	*/
@@ -94,7 +116,7 @@ longest_match:
 /* if (s->prev_length >= s->good_match) {				*/
 /*     chain_length >>= 2;						*/
 /* }									*/
-
+ 
 		movl	dsPrevLen(%edx), %eax
 		movl	dsGoodMatch(%edx), %ebx
 		cmpl	%ebx, %eax
@@ -322,8 +344,14 @@ LookaheadRet:
 /* Restore the stack and return from whence we came.			*/
 
 		addl	$LocalVarsSize, %esp
+		.cfi_def_cfa_offset 20
 		popl	%ebx
+		.cfi_def_cfa_offset 16
 		popl	%esi
+		.cfi_def_cfa_offset 12
 		popl	%edi
+		.cfi_def_cfa_offset 8
 		popl	%ebp
+		.cfi_def_cfa_offset 4
+.cfi_endproc
 match_init:	ret

contrib/delphi/ZLib.pas

@@ -152,7 +152,7 @@ procedure DecompressToUserBuf(const InBuf: Pointer; InBytes: Integer;
   const OutBuf: Pointer; BufSize: Integer);
 
 const
-  zlib_version = '1.2.3';
+  zlib_version = '1.2.5.1';
 
 type
   EZlibError = class(Exception);

contrib/delphi/zlibd32.mak

@@ -18,9 +18,9 @@ LDFLAGS =
 # variables
 ZLIB_LIB = zlib.lib
 
-OBJ1 = adler32.obj compress.obj crc32.obj deflate.obj gzclose.obj gzio.obj gzlib.obj gzread.obj
+OBJ1 = adler32.obj compress.obj crc32.obj deflate.obj gzclose.obj gzlib.obj gzread.obj
 OBJ2 = gzwrite.obj infback.obj inffast.obj inflate.obj inftrees.obj trees.obj uncompr.obj zutil.obj
-OBJP1 = +adler32.obj+compress.obj+crc32.obj+deflate.obj+gzclose.obj+gzio.obj+gzlib.obj+gzread.obj
+OBJP1 = +adler32.obj+compress.obj+crc32.obj+deflate.obj+gzclose.obj+gzlib.obj+gzread.obj
 OBJP2 = +gzwrite.obj+infback.obj+inffast.obj+inflate.obj+inftrees.obj+trees.obj+uncompr.obj+zutil.obj
 
 
@@ -40,8 +40,6 @@ deflate.obj: deflate.c deflate.h zutil.h zlib.h zconf.h
 
 gzclose.obj: gzclose.c zlib.h zconf.h gzguts.h
 
-gzio.obj: gzio.c zutil.h zlib.h zconf.h
-
 gzlib.obj: gzlib.c zlib.h zconf.h gzguts.h
 
 gzread.obj: gzread.c zlib.h zconf.h gzguts.h

contrib/dotzlib/DotZLib.build

@@ -4,7 +4,7 @@
 
 	<property name="nunit.location" value="c:/program files/NUnit V2.1/bin" />
 	<property name="build.root" value="bin" />
-	
+
 	<property name="debug" value="true" />
 	<property name="nunit" value="true" />
 
@@ -16,7 +16,7 @@
 	</target>
 
 	<target name="build" description="compiles the source code">
-		
+
 		<mkdir dir="${build.folder}" />
 		<csc target="library" output="${build.folder}DotZLib.dll" debug="${debug}">
 			<references basedir="${nunit.location}">

contrib/dotzlib/DotZLib/AssemblyInfo.cs

@@ -2,7 +2,7 @@ using System.Reflection;
 using System.Runtime.CompilerServices;
 
 //
-// General Information about an assembly is controlled through the following 
+// General Information about an assembly is controlled through the following
 // set of attributes. Change these attribute values to modify the information
 // associated with an assembly.
 //
@@ -13,42 +13,42 @@ using System.Runtime.CompilerServices;
 [assembly: AssemblyProduct("")]
 [assembly: AssemblyCopyright("(c) 2004 by Henrik Ravn")]
 [assembly: AssemblyTrademark("")]
-[assembly: AssemblyCulture("")]		
+[assembly: AssemblyCulture("")]
 
 //
 // Version information for an assembly consists of the following four values:
 //
 //      Major Version
-//      Minor Version 
+//      Minor Version
 //      Build Number
 //      Revision
 //
-// You can specify all the values or you can default the Revision and Build Numbers 
+// You can specify all the values or you can default the Revision and Build Numbers
 // by using the '*' as shown below:
 
 [assembly: AssemblyVersion("1.0.*")]
 
 //
-// In order to sign your assembly you must specify a key to use. Refer to the 
+// In order to sign your assembly you must specify a key to use. Refer to the
 // Microsoft .NET Framework documentation for more information on assembly signing.
 //
-// Use the attributes below to control which key is used for signing. 
+// Use the attributes below to control which key is used for signing.
 //
-// Notes: 
+// Notes:
 //   (*) If no key is specified, the assembly is not signed.
 //   (*) KeyName refers to a key that has been installed in the Crypto Service
 //       Provider (CSP) on your machine. KeyFile refers to a file which contains
 //       a key.
-//   (*) If the KeyFile and the KeyName values are both specified, the 
+//   (*) If the KeyFile and the KeyName values are both specified, the
 //       following processing occurs:
 //       (1) If the KeyName can be found in the CSP, that key is used.
-//       (2) If the KeyName does not exist and the KeyFile does exist, the key 
+//       (2) If the KeyName does not exist and the KeyFile does exist, the key
 //           in the KeyFile is installed into the CSP and used.
 //   (*) In order to create a KeyFile, you can use the sn.exe (Strong Name) utility.
 //       When specifying the KeyFile, the location of the KeyFile should be
 //       relative to the project output directory which is
 //       %Project Directory%\obj\<configuration>. For example, if your KeyFile is
-//       located in the project directory, you would specify the AssemblyKeyFile 
+//       located in the project directory, you would specify the AssemblyKeyFile
 //       attribute as [assembly: AssemblyKeyFile("..\\..\\mykey.snk")]
 //   (*) Delay Signing is an advanced option - see the Microsoft .NET Framework
 //       documentation for more information on this.

contrib/dotzlib/DotZLib/ChecksumImpl.cs

@@ -1,7 +1,7 @@
 //
 // <20> Copyright Henrik Ravn 2004
 //
-// Use, modification and distribution are subject to the Boost Software License, Version 1.0. 
+// Use, modification and distribution are subject to the Boost Software License, Version 1.0.
 // (See accompanying file LICENSE_1_0.txt or copy at http://www.boost.org/LICENSE_1_0.txt)
 //
 
@@ -25,7 +25,7 @@ namespace DotZLib
         protected uint _current;
 
         /// <summary>
-        /// Initializes a new instance of the checksum generator base - the current checksum is 
+        /// Initializes a new instance of the checksum generator base - the current checksum is
         /// set to zero
         /// </summary>
         public ChecksumGeneratorBase()
@@ -61,7 +61,7 @@ namespace DotZLib
         /// <exception cref="ArgumentException">The sum of offset and count is larger than the length of <c>data</c></exception>
         /// <exception cref="NullReferenceException"><c>data</c> is a null reference</exception>
         /// <exception cref="ArgumentOutOfRangeException">Offset or count is negative.</exception>
-        /// <remarks>All the other <c>Update</c> methods are implmeneted in terms of this one. 
+        /// <remarks>All the other <c>Update</c> methods are implmeneted in terms of this one.
         /// This is therefore the only method a derived class has to implement</remarks>
         public abstract void Update(byte[] data, int offset, int count);
 
@@ -101,7 +101,7 @@ namespace DotZLib
     /// <summary>
     /// Implements a CRC32 checksum generator
     /// </summary>
-    public sealed class CRC32Checksum : ChecksumGeneratorBase    
+    public sealed class CRC32Checksum : ChecksumGeneratorBase
     {
         #region DLL imports
 
@@ -152,7 +152,7 @@ namespace DotZLib
     /// <summary>
     /// Implements a checksum generator that computes the Adler checksum on data
     /// </summary>
-    public sealed class AdlerChecksum : ChecksumGeneratorBase    
+    public sealed class AdlerChecksum : ChecksumGeneratorBase
     {
         #region DLL imports
 

contrib/dotzlib/DotZLib/CircularBuffer.cs

@@ -1,7 +1,7 @@
 //
 // <20> Copyright Henrik Ravn 2004
 //
-// Use, modification and distribution are subject to the Boost Software License, Version 1.0. 
+// Use, modification and distribution are subject to the Boost Software License, Version 1.0.
 // (See accompanying file LICENSE_1_0.txt or copy at http://www.boost.org/LICENSE_1_0.txt)
 //
 
@@ -25,7 +25,7 @@ namespace DotZLib
         #endregion
 
         public CircularBuffer(int capacity)
-        {    
+        {
             Debug.Assert( capacity > 0 );
             _buffer = new byte[capacity];
             _capacity = capacity;

contrib/dotzlib/DotZLib/CodecBase.cs

@@ -1,7 +1,7 @@
 //
 // <20> Copyright Henrik Ravn 2004
 //
-// Use, modification and distribution are subject to the Boost Software License, Version 1.0. 
+// Use, modification and distribution are subject to the Boost Software License, Version 1.0.
 // (See accompanying file LICENSE_1_0.txt or copy at http://www.boost.org/LICENSE_1_0.txt)
 //
 
@@ -19,7 +19,7 @@ namespace DotZLib
         #region Data members
 
         /// <summary>
-        /// Instance of the internal zlib buffer structure that is 
+        /// Instance of the internal zlib buffer structure that is
         /// passed to all functions in the zlib dll
         /// </summary>
         internal ZStream _ztream = new ZStream();
@@ -45,7 +45,7 @@ namespace DotZLib
         #endregion
 
         /// <summary>
-        /// Initializes a new instance of the <c>CodeBase</c> class. 
+        /// Initializes a new instance of the <c>CodeBase</c> class.
         /// </summary>
 		public CodecBase()
 		{
@@ -77,7 +77,7 @@ namespace DotZLib
             if (_ztream.total_out > 0)
             {
                 if (DataAvailable != null)
-                    DataAvailable( _outBuffer, 0, (int)_ztream.total_out); 
+                    DataAvailable( _outBuffer, 0, (int)_ztream.total_out);
                 resetOutput();
             }
         }

contrib/dotzlib/DotZLib/Deflater.cs

@@ -1,7 +1,7 @@
 //
 // <20> Copyright Henrik Ravn 2004
 //
-// Use, modification and distribution are subject to the Boost Software License, Version 1.0. 
+// Use, modification and distribution are subject to the Boost Software License, Version 1.0.
 // (See accompanying file LICENSE_1_0.txt or copy at http://www.boost.org/LICENSE_1_0.txt)
 //
 
@@ -56,7 +56,7 @@ namespace DotZLib
             if (data == null) throw new ArgumentNullException();
             if (offset < 0 || count < 0) throw new ArgumentOutOfRangeException();
             if ((offset+count) > data.Length) throw new ArgumentException();
-            
+
             int total = count;
             int inputIndex = offset;
             int err = 0;
@@ -86,7 +86,7 @@ namespace DotZLib
         public override void Finish()
         {
             int err;
-            do 
+            do
             {
                 err = deflate(ref _ztream, (int)FlushTypes.Finish);
                 OnDataAvailable();

contrib/dotzlib/DotZLib/DotZLib.cs

@@ -1,7 +1,7 @@
 //
 // <20> Copyright Henrik Ravn 2004
 //
-// Use, modification and distribution are subject to the Boost Software License, Version 1.0. 
+// Use, modification and distribution are subject to the Boost Software License, Version 1.0.
 // (See accompanying file LICENSE_1_0.txt or copy at http://www.boost.org/LICENSE_1_0.txt)
 //
 
@@ -19,7 +19,7 @@ namespace DotZLib
     /// <summary>
     /// Defines constants for the various flush types used with zlib
     /// </summary>
-    internal enum FlushTypes 
+    internal enum FlushTypes
     {
         None,  Partial,  Sync,  Full,  Finish,  Block
     }
@@ -38,7 +38,7 @@ namespace DotZLib
         public uint total_out;
 
         [MarshalAs(UnmanagedType.LPStr)]
-        string msg; 
+        string msg;
         uint state;
 
         uint zalloc;
@@ -51,7 +51,7 @@ namespace DotZLib
     }
 
     #endregion
-    
+
     #endregion
 
     #region Public enums
@@ -63,7 +63,7 @@ namespace DotZLib
         /// <summary>
         /// The default compression level with a reasonable compromise between compression and speed
         /// </summary>
-        Default = -1,   
+        Default = -1,
         /// <summary>
         /// No compression at all. The data are passed straight through.
         /// </summary>
@@ -71,7 +71,7 @@ namespace DotZLib
         /// <summary>
         /// The maximum compression rate available.
         /// </summary>
-        Best = 9,   
+        Best = 9,
         /// <summary>
         /// The fastest available compression level.
         /// </summary>
@@ -86,7 +86,7 @@ namespace DotZLib
     public class ZLibException : ApplicationException
     {
         /// <summary>
-        /// Initializes a new instance of the <see cref="ZLibException"/> class with a specified 
+        /// Initializes a new instance of the <see cref="ZLibException"/> class with a specified
         /// error message and error code
         /// </summary>
         /// <param name="errorCode">The zlib error code that caused the exception</param>
@@ -96,7 +96,7 @@ namespace DotZLib
         }
 
         /// <summary>
-        /// Initializes a new instance of the <see cref="ZLibException"/> class with a specified 
+        /// Initializes a new instance of the <see cref="ZLibException"/> class with a specified
         /// error code
         /// </summary>
         /// <param name="errorCode">The zlib error code that caused the exception</param>
@@ -109,7 +109,7 @@ namespace DotZLib
     #region Interfaces
 
     /// <summary>
-    /// Declares methods and properties that enables a running checksum to be calculated 
+    /// Declares methods and properties that enables a running checksum to be calculated
     /// </summary>
     public interface ChecksumGenerator
     {
@@ -163,7 +163,7 @@ namespace DotZLib
     /// <paramref name="data">The byte array containing the processed data</paramref>
     /// <paramref name="startIndex">The index of the first processed byte in <c>data</c></paramref>
     /// <paramref name="count">The number of processed bytes available</paramref>
-    /// <remarks>On return from this method, the data may be overwritten, so grab it while you can. 
+    /// <remarks>On return from this method, the data may be overwritten, so grab it while you can.
     /// You cannot assume that startIndex will be zero.
     /// </remarks>
     public delegate void DataAvailableHandler(byte[] data, int startIndex, int count);

contrib/dotzlib/DotZLib/GZipStream.cs

@@ -1,7 +1,7 @@
 //
 // <20> Copyright Henrik Ravn 2004
 //
-// Use, modification and distribution are subject to the Boost Software License, Version 1.0. 
+// Use, modification and distribution are subject to the Boost Software License, Version 1.0.
 // (See accompanying file LICENSE_1_0.txt or copy at http://www.boost.org/LICENSE_1_0.txt)
 //
 
@@ -84,7 +84,7 @@ namespace DotZLib
                 return !_isWriting;
             }
         }
-    
+
 
         /// <summary>
         /// Returns false.
@@ -96,7 +96,7 @@ namespace DotZLib
                 return false;
             }
         }
-    
+
         /// <summary>
         /// Returns true if this tsream is writeable, false otherwise
         /// </summary>
@@ -108,7 +108,7 @@ namespace DotZLib
             }
         }
         #endregion
-    
+
         #region Destructor & IDispose stuff
 
         /// <summary>
@@ -137,7 +137,7 @@ namespace DotZLib
             }
         }
         #endregion
-    
+
         #region Basic reading and writing
         /// <summary>
         /// Attempts to read a number of bytes from the stream.
@@ -244,7 +244,7 @@ namespace DotZLib
         {
             throw new NotSupportedException();
         }
-    
+
         /// <summary>
         ///  Not suppported.
         /// </summary>
@@ -256,7 +256,7 @@ namespace DotZLib
         {
             throw new NotSupportedException();
         }
-    
+
         /// <summary>
         /// Flushes the <c>GZipStream</c>.
         /// </summary>
@@ -266,7 +266,7 @@ namespace DotZLib
         {
             // left empty on purpose
         }
-    
+
         /// <summary>
         /// Gets/sets the current position in the <c>GZipStream</c>. Not suppported.
         /// </summary>
@@ -283,7 +283,7 @@ namespace DotZLib
                 throw new NotSupportedException();
             }
         }
-    
+
         /// <summary>
         /// Gets the size of the stream. Not suppported.
         /// </summary>

contrib/dotzlib/DotZLib/Inflater.cs

@@ -1,7 +1,7 @@
 //
 // <20> Copyright Henrik Ravn 2004
 //
-// Use, modification and distribution are subject to the Boost Software License, Version 1.0. 
+// Use, modification and distribution are subject to the Boost Software License, Version 1.0.
 // (See accompanying file LICENSE_1_0.txt or copy at http://www.boost.org/LICENSE_1_0.txt)
 //
 
@@ -11,7 +11,7 @@ using System.Runtime.InteropServices;
 
 namespace DotZLib
 {
-    
+
     /// <summary>
     /// Implements a data decompressor, using the inflate algorithm in the ZLib dll
     /// </summary>
@@ -84,7 +84,7 @@ namespace DotZLib
         public override void Finish()
         {
             int err;
-            do 
+            do
             {
                 err = inflate(ref _ztream, (int)FlushTypes.Finish);
                 OnDataAvailable();

contrib/dotzlib/DotZLib/UnitTests.cs

@@ -1,7 +1,7 @@
 //
 // <20> Copyright Henrik Ravn 2004
 //
-// Use, modification and distribution are subject to the Boost Software License, Version 1.0. 
+// Use, modification and distribution are subject to the Boost Software License, Version 1.0.
 // (See accompanying file LICENSE_1_0.txt or copy at http://www.boost.org/LICENSE_1_0.txt)
 //
 
@@ -156,7 +156,7 @@ namespace DotZLibTests
         public void Info_Version()
         {
             Info info = new Info();
-            Assert.AreEqual("1.2.3", Info.Version);
+            Assert.AreEqual("1.2.5.1", Info.Version);
             Assert.AreEqual(32, info.SizeOfUInt);
             Assert.AreEqual(32, info.SizeOfULong);
             Assert.AreEqual(32, info.SizeOfPointer);
@@ -225,7 +225,7 @@ namespace DotZLibTests
 
         [Test]
         public void Inflate_Expand()
-        { 
+        {
             uncompressedData.Clear();
 
             using (Inflater inf = new Inflater())
@@ -271,4 +271,4 @@ namespace DotZLibTests
 	}
 }
 
-#endif
+#endif

contrib/dotzlib/readme.txt

@@ -1,6 +1,6 @@
 This directory contains a .Net wrapper class library for the ZLib1.dll
 
-The wrapper includes support for inflating/deflating memory buffers, 
+The wrapper includes support for inflating/deflating memory buffers,
 .Net streaming wrappers for the gz streams part of zlib, and wrappers
 for the checksum parts of zlib. See DotZLib/UnitTests.cs for examples.
 
@@ -26,11 +26,11 @@ Build instructions:
 
 1. Using Visual Studio.Net 2003:
    Open DotZLib.sln in VS.Net and build from there. Output file (DotZLib.dll)
-   will be found ./DotZLib/bin/release or ./DotZLib/bin/debug, depending on 
+   will be found ./DotZLib/bin/release or ./DotZLib/bin/debug, depending on
-   you are building the release or debug version of the library. Check 
+   you are building the release or debug version of the library. Check
    DotZLib/UnitTests.cs for instructions on how to include unit tests in the
    build.
-   
+
 2. Using NAnt:
    Open a command prompt with access to the build environment and run nant
    in the same directory as the DotZLib.build file.
@@ -38,15 +38,15 @@ Build instructions:
    debug={true|false} to toggle between release/debug builds (default=true).
    nunit={true|false} to include or esclude unit tests (default=true).
    Also the target clean will remove binaries.
-   Output file (DotZLib.dll) will be found in either ./DotZLib/bin/release 
+   Output file (DotZLib.dll) will be found in either ./DotZLib/bin/release
-   or ./DotZLib/bin/debug, depending on whether you are building the release 
+   or ./DotZLib/bin/debug, depending on whether you are building the release
    or debug version of the library.
 
-   Examples: 
+   Examples:
      nant -D:debug=false -D:nunit=false
        will build a release mode version of the library without unit tests.
      nant
-       will build a debug version of the library with unit tests 
+       will build a debug version of the library with unit tests
      nant clean
        will remove all previously built files.
 
@@ -54,5 +54,5 @@ Build instructions:
 ---------------------------------
 Copyright (c) Henrik Ravn 2004
 
-Use, modification and distribution are subject to the Boost Software License, Version 1.0. 
+Use, modification and distribution are subject to the Boost Software License, Version 1.0.
 (See accompanying file LICENSE_1_0.txt or copy at http://www.boost.org/LICENSE_1_0.txt)

contrib/gcc_gvmat64/gvmat64.S

@@ -0,0 +1,574 @@
+/*
+;uInt longest_match_x64(
+;    deflate_state *s,
+;    IPos cur_match);                             // current match 
+
+; gvmat64.S -- Asm portion of the optimized longest_match for 32 bits x86_64
+;  (AMD64 on Athlon 64, Opteron, Phenom
+;     and Intel EM64T on Pentium 4 with EM64T, Pentium D, Core 2 Duo, Core I5/I7)
+; this file is translation from gvmat64.asm to GCC 4.x (for Linux, Mac XCode)
+; Copyright (C) 1995-2010 Jean-loup Gailly, Brian Raiter and Gilles Vollant.
+;
+; File written by Gilles Vollant, by converting to assembly the longest_match
+;  from Jean-loup Gailly in deflate.c of zLib and infoZip zip.
+;  and by taking inspiration on asm686 with masm, optimised assembly code
+;        from Brian Raiter, written 1998
+;
+;  This software is provided 'as-is', without any express or implied
+;  warranty.  In no event will the authors be held liable for any damages
+;  arising from the use of this software.
+;
+;  Permission is granted to anyone to use this software for any purpose,
+;  including commercial applications, and to alter it and redistribute it
+;  freely, subject to the following restrictions:
+;
+;  1. The origin of this software must not be misrepresented; you must not
+;     claim that you wrote the original software. If you use this software
+;     in a product, an acknowledgment in the product documentation would be
+;     appreciated but is not required.
+;  2. Altered source versions must be plainly marked as such, and must not be
+;     misrepresented as being the original software
+;  3. This notice may not be removed or altered from any source distribution.
+;
+;         http://www.zlib.net
+;         http://www.winimage.com/zLibDll
+;         http://www.muppetlabs.com/~breadbox/software/assembly.html
+;
+; to compile this file for zLib, I use option:
+;   gcc -c -arch x86_64 gvmat64.S
+
+
+;uInt longest_match(s, cur_match)
+;    deflate_state *s;
+;    IPos cur_match;                             // current match /
+;
+; with XCode for Mac, I had strange error with some jump on intel syntax
+; this is why BEFORE_JMP and AFTER_JMP are used
+ */
+
+
+#define BEFORE_JMP .att_syntax
+#define AFTER_JMP .intel_syntax noprefix
+
+#ifndef NO_UNDERLINE
+#	define	match_init	_match_init
+#	define	longest_match	_longest_match
+#endif
+
+.intel_syntax noprefix
+
+.globl	match_init, longest_match
+.text
+longest_match:
+
+
+
+#define LocalVarsSize 96
+/*
+; register used : rax,rbx,rcx,rdx,rsi,rdi,r8,r9,r10,r11,r12
+; free register :  r14,r15
+; register can be saved : rsp
+*/
+
+#define chainlenwmask     (rsp + 8 - LocalVarsSize)
+#define nicematch         (rsp + 16 - LocalVarsSize)
+
+#define save_rdi        (rsp + 24 - LocalVarsSize)
+#define save_rsi        (rsp + 32 - LocalVarsSize)
+#define save_rbx        (rsp + 40 - LocalVarsSize)
+#define save_rbp        (rsp + 48 - LocalVarsSize)
+#define save_r12        (rsp + 56 - LocalVarsSize)
+#define save_r13        (rsp + 64 - LocalVarsSize)
+#define save_r14        (rsp + 72 - LocalVarsSize)
+#define save_r15        (rsp + 80 - LocalVarsSize)
+
+
+/*
+;  all the +4 offsets are due to the addition of pending_buf_size (in zlib
+;  in the deflate_state structure since the asm code was first written
+;  (if you compile with zlib 1.0.4 or older, remove the +4).
+;  Note : these value are good with a 8 bytes boundary pack structure
+*/
+
+#define    MAX_MATCH              258
+#define    MIN_MATCH              3
+#define    MIN_LOOKAHEAD          (MAX_MATCH+MIN_MATCH+1)
+
+/*
+;;; Offsets for fields in the deflate_state structure. These numbers
+;;; are calculated from the definition of deflate_state, with the
+;;; assumption that the compiler will dword-align the fields. (Thus,
+;;; changing the definition of deflate_state could easily cause this
+;;; program to crash horribly, without so much as a warning at
+;;; compile time. Sigh.)
+
+;  all the +zlib1222add offsets are due to the addition of fields
+;  in zlib in the deflate_state structure since the asm code was first written
+;  (if you compile with zlib 1.0.4 or older, use "zlib1222add equ (-4)").
+;  (if you compile with zlib between 1.0.5 and 1.2.2.1, use "zlib1222add equ 0").
+;  if you compile with zlib 1.2.2.2 or later , use "zlib1222add equ 8").
+*/
+
+
+
+/* you can check the structure offset by running
+
+#include <stdlib.h>
+#include <stdio.h>
+#include "deflate.h"
+
+void print_depl()
+{
+deflate_state ds;
+deflate_state *s=&ds;
+printf("size pointer=%u\n",(int)sizeof(void*));
+
+printf("#define dsWSize         %u\n",(int)(((char*)&(s->w_size))-((char*)s)));
+printf("#define dsWMask         %u\n",(int)(((char*)&(s->w_mask))-((char*)s)));
+printf("#define dsWindow        %u\n",(int)(((char*)&(s->window))-((char*)s)));
+printf("#define dsPrev          %u\n",(int)(((char*)&(s->prev))-((char*)s)));
+printf("#define dsMatchLen      %u\n",(int)(((char*)&(s->match_length))-((char*)s)));
+printf("#define dsPrevMatch     %u\n",(int)(((char*)&(s->prev_match))-((char*)s)));
+printf("#define dsStrStart      %u\n",(int)(((char*)&(s->strstart))-((char*)s)));
+printf("#define dsMatchStart    %u\n",(int)(((char*)&(s->match_start))-((char*)s)));
+printf("#define dsLookahead     %u\n",(int)(((char*)&(s->lookahead))-((char*)s)));
+printf("#define dsPrevLen       %u\n",(int)(((char*)&(s->prev_length))-((char*)s)));
+printf("#define dsMaxChainLen   %u\n",(int)(((char*)&(s->max_chain_length))-((char*)s)));
+printf("#define dsGoodMatch     %u\n",(int)(((char*)&(s->good_match))-((char*)s)));
+printf("#define dsNiceMatch     %u\n",(int)(((char*)&(s->nice_match))-((char*)s)));
+}
+*/
+
+#define dsWSize          68
+#define dsWMask          76
+#define dsWindow         80
+#define dsPrev           96
+#define dsMatchLen       144
+#define dsPrevMatch      148
+#define dsStrStart       156
+#define dsMatchStart     160
+#define dsLookahead      164
+#define dsPrevLen        168
+#define dsMaxChainLen    172
+#define dsGoodMatch      188
+#define dsNiceMatch      192
+
+#define window_size      [ rcx + dsWSize]
+#define WMask            [ rcx + dsWMask]
+#define window_ad        [ rcx + dsWindow]
+#define prev_ad          [ rcx + dsPrev]
+#define strstart         [ rcx + dsStrStart]
+#define match_start      [ rcx + dsMatchStart]
+#define Lookahead        [ rcx + dsLookahead] //; 0ffffffffh on infozip
+#define prev_length      [ rcx + dsPrevLen]
+#define max_chain_length [ rcx + dsMaxChainLen]
+#define good_match       [ rcx + dsGoodMatch]
+#define nice_match       [ rcx + dsNiceMatch]
+
+/*
+; windows:
+; parameter 1 in rcx(deflate state s), param 2 in rdx (cur match)
+
+; see http://weblogs.asp.net/oldnewthing/archive/2004/01/14/58579.aspx and
+; http://msdn.microsoft.com/library/en-us/kmarch/hh/kmarch/64bitAMD_8e951dd2-ee77-4728-8702-55ce4b5dd24a.xml.asp
+;
+; All registers must be preserved across the call, except for
+;   rax, rcx, rdx, r8, r9, r10, and r11, which are scratch.
+
+;
+; gcc on macosx-linux:
+; see http://www.x86-64.org/documentation/abi-0.99.pdf
+; param 1 in rdi, param 2 in rsi
+; rbx, rsp, rbp, r12 to r15 must be preserved
+
+;;; Save registers that the compiler may be using, and adjust esp to
+;;; make room for our stack frame.
+
+
+;;; Retrieve the function arguments. r8d will hold cur_match
+;;; throughout the entire function. edx will hold the pointer to the
+;;; deflate_state structure during the function's setup (before
+;;; entering the main loop.
+
+; ms: parameter 1 in rcx (deflate_state* s), param 2 in edx -> r8 (cur match)
+; mac: param 1 in rdi, param 2 rsi
+; this clear high 32 bits of r8, which can be garbage in both r8 and rdx
+*/
+        mov [save_rbx],rbx
+        mov [save_rbp],rbp
+
+
+        mov rcx,rdi
+
+        mov r8d,esi
+
+
+        mov [save_r12],r12
+        mov [save_r13],r13
+        mov [save_r14],r14
+        mov [save_r15],r15
+
+
+//;;; uInt wmask = s->w_mask;
+//;;; unsigned chain_length = s->max_chain_length;
+//;;; if (s->prev_length >= s->good_match) {
+//;;;     chain_length >>= 2;
+//;;; }
+
+
+        mov edi, prev_length
+        mov esi, good_match
+        mov eax, WMask
+        mov ebx, max_chain_length
+        cmp edi, esi
+        jl  LastMatchGood
+        shr ebx, 2
+LastMatchGood:
+
+//;;; chainlen is decremented once beforehand so that the function can
+//;;; use the sign flag instead of the zero flag for the exit test.
+//;;; It is then shifted into the high word, to make room for the wmask
+//;;; value, which it will always accompany.
+
+        dec ebx
+        shl ebx, 16
+        or  ebx, eax
+
+//;;; on zlib only
+//;;; if ((uInt)nice_match > s->lookahead) nice_match = s->lookahead;
+
+
+
+        mov eax, nice_match
+        mov [chainlenwmask], ebx
+        mov r10d, Lookahead
+        cmp r10d, eax
+        cmovnl r10d, eax
+        mov [nicematch],r10d
+
+
+
+//;;; register Bytef *scan = s->window + s->strstart;
+        mov r10, window_ad
+        mov ebp, strstart
+        lea r13, [r10 + rbp]
+
+//;;; Determine how many bytes the scan ptr is off from being
+//;;; dword-aligned.
+
+         mov r9,r13
+         neg r13
+         and r13,3
+
+//;;; IPos limit = s->strstart > (IPos)MAX_DIST(s) ?
+//;;;     s->strstart - (IPos)MAX_DIST(s) : NIL;
+
+
+        mov eax, window_size
+        sub eax, MIN_LOOKAHEAD
+
+
+        xor edi,edi
+        sub ebp, eax
+
+        mov r11d, prev_length
+
+        cmovng ebp,edi
+
+//;;; int best_len = s->prev_length;
+
+
+//;;; Store the sum of s->window + best_len in esi locally, and in esi.
+
+       lea  rsi,[r10+r11]
+
+//;;; register ush scan_start = *(ushf*)scan;
+//;;; register ush scan_end   = *(ushf*)(scan+best_len-1);
+//;;; Posf *prev = s->prev;
+
+        movzx r12d,word ptr [r9]
+        movzx ebx, word ptr [r9 + r11 - 1]
+
+        mov rdi, prev_ad
+
+//;;; Jump into the main loop.
+
+        mov edx, [chainlenwmask]
+
+        cmp bx,word ptr [rsi + r8 - 1]
+        jz  LookupLoopIsZero
+				
+						
+						
+LookupLoop1:
+        and r8d, edx
+
+        movzx   r8d, word ptr [rdi + r8*2]
+        cmp r8d, ebp
+        jbe LeaveNow
+		
+		
+		
+        sub edx, 0x00010000
+		BEFORE_JMP
+        js  LeaveNow
+		AFTER_JMP
+
+LoopEntry1:
+        cmp bx,word ptr [rsi + r8 - 1]
+		BEFORE_JMP
+        jz  LookupLoopIsZero
+		AFTER_JMP
+
+LookupLoop2:
+        and r8d, edx
+
+        movzx   r8d, word ptr [rdi + r8*2]
+        cmp r8d, ebp
+		BEFORE_JMP
+        jbe LeaveNow
+		AFTER_JMP
+        sub edx, 0x00010000
+		BEFORE_JMP
+        js  LeaveNow
+		AFTER_JMP
+
+LoopEntry2:
+        cmp bx,word ptr [rsi + r8 - 1]
+		BEFORE_JMP
+        jz  LookupLoopIsZero
+		AFTER_JMP
+
+LookupLoop4:
+        and r8d, edx
+
+        movzx   r8d, word ptr [rdi + r8*2]
+        cmp r8d, ebp
+		BEFORE_JMP
+        jbe LeaveNow
+		AFTER_JMP
+        sub edx, 0x00010000
+		BEFORE_JMP
+        js  LeaveNow
+		AFTER_JMP
+
+LoopEntry4:
+
+        cmp bx,word ptr [rsi + r8 - 1]
+		BEFORE_JMP
+        jnz LookupLoop1
+        jmp LookupLoopIsZero
+		AFTER_JMP
+/*
+;;; do {
+;;;     match = s->window + cur_match;
+;;;     if (*(ushf*)(match+best_len-1) != scan_end ||
+;;;         *(ushf*)match != scan_start) continue;
+;;;     [...]
+;;; } while ((cur_match = prev[cur_match & wmask]) > limit
+;;;          && --chain_length != 0);
+;;;
+;;; Here is the inner loop of the function. The function will spend the
+;;; majority of its time in this loop, and majority of that time will
+;;; be spent in the first ten instructions.
+;;;
+;;; Within this loop:
+;;; ebx = scanend
+;;; r8d = curmatch
+;;; edx = chainlenwmask - i.e., ((chainlen << 16) | wmask)
+;;; esi = windowbestlen - i.e., (window + bestlen)
+;;; edi = prev
+;;; ebp = limit
+*/
+.balign 16
+LookupLoop:
+        and r8d, edx
+
+        movzx   r8d, word ptr [rdi + r8*2]
+        cmp r8d, ebp
+		BEFORE_JMP
+        jbe LeaveNow
+		AFTER_JMP
+        sub edx, 0x00010000
+		BEFORE_JMP
+        js  LeaveNow
+		AFTER_JMP
+
+LoopEntry:
+
+        cmp bx,word ptr [rsi + r8 - 1]
+		BEFORE_JMP
+        jnz LookupLoop1
+		AFTER_JMP
+LookupLoopIsZero:
+        cmp     r12w, word ptr [r10 + r8]
+		BEFORE_JMP
+        jnz LookupLoop1
+		AFTER_JMP
+
+
+//;;; Store the current value of chainlen.
+        mov [chainlenwmask], edx
+/*
+;;; Point edi to the string under scrutiny, and esi to the string we
+;;; are hoping to match it up with. In actuality, esi and edi are
+;;; both pointed (MAX_MATCH_8 - scanalign) bytes ahead, and edx is
+;;; initialized to -(MAX_MATCH_8 - scanalign).
+*/
+        lea rsi,[r8+r10]
+        mov rdx, 0xfffffffffffffef8 //; -(MAX_MATCH_8)
+        lea rsi, [rsi + r13 + 0x0108] //;MAX_MATCH_8]
+        lea rdi, [r9 + r13 + 0x0108] //;MAX_MATCH_8]
+
+        prefetcht1 [rsi+rdx]
+        prefetcht1 [rdi+rdx]
+
+/*
+;;; Test the strings for equality, 8 bytes at a time. At the end,
+;;; adjust rdx so that it is offset to the exact byte that mismatched.
+;;;
+;;; We already know at this point that the first three bytes of the
+;;; strings match each other, and they can be safely passed over before
+;;; starting the compare loop. So what this code does is skip over 0-3
+;;; bytes, as much as necessary in order to dword-align the edi
+;;; pointer. (rsi will still be misaligned three times out of four.)
+;;;
+;;; It should be confessed that this loop usually does not represent
+;;; much of the total running time. Replacing it with a more
+;;; straightforward "rep cmpsb" would not drastically degrade
+;;; performance.
+*/
+
+LoopCmps:
+        mov rax, [rsi + rdx]
+        xor rax, [rdi + rdx]
+        jnz LeaveLoopCmps
+
+        mov rax, [rsi + rdx + 8]
+        xor rax, [rdi + rdx + 8]
+        jnz LeaveLoopCmps8
+
+
+        mov rax, [rsi + rdx + 8+8]
+        xor rax, [rdi + rdx + 8+8]
+        jnz LeaveLoopCmps16
+
+        add rdx,8+8+8
+
+		BEFORE_JMP
+        jnz  LoopCmps
+        jmp  LenMaximum
+		AFTER_JMP
+		
+LeaveLoopCmps16: add rdx,8
+LeaveLoopCmps8: add rdx,8
+LeaveLoopCmps:
+
+        test    eax, 0x0000FFFF
+        jnz LenLower
+
+        test eax,0xffffffff
+
+        jnz LenLower32
+
+        add rdx,4
+        shr rax,32
+        or ax,ax
+		BEFORE_JMP
+        jnz LenLower
+		AFTER_JMP
+
+LenLower32:
+        shr eax,16
+        add rdx,2
+		
+LenLower:		
+        sub al, 1
+        adc rdx, 0
+//;;; Calculate the length of the match. If it is longer than MAX_MATCH,
+//;;; then automatically accept it as the best possible match and leave.
+
+        lea rax, [rdi + rdx]
+        sub rax, r9
+        cmp eax, MAX_MATCH
+		BEFORE_JMP
+        jge LenMaximum
+		AFTER_JMP
+/*
+;;; If the length of the match is not longer than the best match we
+;;; have so far, then forget it and return to the lookup loop.
+;///////////////////////////////////
+*/
+        cmp eax, r11d
+        jg  LongerMatch
+
+        lea rsi,[r10+r11]
+
+        mov rdi, prev_ad
+        mov edx, [chainlenwmask]
+		BEFORE_JMP
+        jmp LookupLoop
+		AFTER_JMP
+/*
+;;;         s->match_start = cur_match;
+;;;         best_len = len;
+;;;         if (len >= nice_match) break;
+;;;         scan_end = *(ushf*)(scan+best_len-1);
+*/
+LongerMatch:
+        mov r11d, eax
+        mov match_start, r8d
+        cmp eax, [nicematch]
+		BEFORE_JMP
+        jge LeaveNow
+		AFTER_JMP
+
+        lea rsi,[r10+rax]
+
+        movzx   ebx, word ptr [r9 + rax - 1]
+        mov rdi, prev_ad
+        mov edx, [chainlenwmask]
+		BEFORE_JMP
+        jmp LookupLoop
+		AFTER_JMP
+
+//;;; Accept the current string, with the maximum possible length.
+
+LenMaximum:
+        mov r11d,MAX_MATCH
+        mov match_start, r8d
+
+//;;; if ((uInt)best_len <= s->lookahead) return (uInt)best_len;
+//;;; return s->lookahead;
+
+LeaveNow:
+        mov eax, Lookahead
+        cmp r11d, eax
+        cmovng eax, r11d
+
+
+
+//;;; Restore the stack and return from whence we came.
+
+
+//        mov rsi,[save_rsi]
+//        mov rdi,[save_rdi]
+        mov rbx,[save_rbx]
+        mov rbp,[save_rbp]
+        mov r12,[save_r12]
+        mov r13,[save_r13]
+        mov r14,[save_r14]
+        mov r15,[save_r15]
+
+
+        ret 0
+//; please don't remove this string !
+//; Your can freely use gvmat64 in any free or commercial app
+//; but it is far better don't remove the string in the binary!
+ //   db     0dh,0ah,"asm686 with masm, optimised assembly code from Brian Raiter, written 1998, converted to amd 64 by Gilles Vollant 2005",0dh,0ah,0
+
+
+match_init:
+  ret 0
+
+

contrib/infback9/inftree9.c

@@ -9,7 +9,7 @@
 #define MAXBITS 15
 
 const char inflate9_copyright[] =
-   " inflate9 1.2.3.6 Copyright 1995-2010 Mark Adler ";
+   " inflate9 1.2.5.1 Copyright 1995-2010 Mark Adler ";
 /*
   If you use the zlib library in a product, an acknowledgment is welcome
   in the documentation of your product. If for some reason you cannot
@@ -64,7 +64,7 @@ unsigned short FAR *work;
     static const unsigned short lext[31] = { /* Length codes 257..285 extra */
         128, 128, 128, 128, 128, 128, 128, 128, 129, 129, 129, 129,
         130, 130, 130, 130, 131, 131, 131, 131, 132, 132, 132, 132,
-        133, 133, 133, 133, 144, 199, 70};
+        133, 133, 133, 133, 144, 205, 203};
     static const unsigned short dbase[32] = { /* Distance codes 0..31 base */
         1, 2, 3, 4, 5, 7, 9, 13, 17, 25, 33, 49,
         65, 97, 129, 193, 257, 385, 513, 769, 1025, 1537, 2049, 3073,

contrib/inflate86/inffas86.c

@@ -113,7 +113,7 @@ unsigned start;         /* inflate()'s starting value for strm->avail_out */
     ar.beg = ar.out - (start - strm->avail_out);
     ar.end = ar.out + (strm->avail_out - PAD_AVAIL_OUT);
     ar.wsize = state->wsize;
-    ar.write = state->write;
+    ar.write = state->wnext;
     ar.window = state->window;
     ar.hold = state->hold;
     ar.bits = state->bits;

contrib/masm686/match.asm

@@ -1,413 +0,0 @@
-
-; match.asm -- Pentium-Pro optimized version of longest_match()
-;
-; Updated for zlib 1.1.3 and converted to MASM 6.1x
-; Copyright (C) 2000 Dan Higdon <hdan@kinesoft.com>
-;                    and Chuck Walbourn <chuckw@kinesoft.com>
-; Corrections by Cosmin Truta <cosmint@cs.ubbcluj.ro>
-;
-; This is free software; you can redistribute it and/or modify it
-; under the terms of the GNU General Public License.
-
-; Based on match.S
-; Written for zlib 1.1.2
-; Copyright (C) 1998 Brian Raiter <breadbox@muppetlabs.com>
-;
-; Modified by Gilles Vollant (2005) for add gzhead and gzindex
-
-	.686P
-	.MODEL	FLAT
-
-;===========================================================================
-; EQUATES
-;===========================================================================
-
-MAX_MATCH	EQU 258
-MIN_MATCH	EQU 3
-MIN_LOOKAHEAD	EQU (MAX_MATCH + MIN_MATCH + 1)
-MAX_MATCH_8	EQU ((MAX_MATCH + 7) AND (NOT 7))
-
-;===========================================================================
-; STRUCTURES
-;===========================================================================
-
-; This STRUCT assumes a 4-byte alignment
-
-DEFLATE_STATE	STRUCT
-ds_strm			dd ?
-ds_status		dd ?
-ds_pending_buf		dd ?
-ds_pending_buf_size	dd ?
-ds_pending_out		dd ?
-ds_pending		dd ?
-ds_wrap			dd ?
-; gzhead and gzindex are added in zlib 1.2.2.2 (see deflate.h)
-ds_gzhead               dd ?
-ds_gzindex              dd ?
-ds_data_type		db ?
-ds_method		db ?
-			db ?	; padding
-			db ?	; padding
-ds_last_flush		dd ?
-ds_w_size		dd ?	; used
-ds_w_bits		dd ?
-ds_w_mask		dd ?	; used
-ds_window		dd ?	; used
-ds_window_size		dd ?
-ds_prev			dd ?	; used
-ds_head			dd ?
-ds_ins_h		dd ?
-ds_hash_size		dd ?
-ds_hash_bits		dd ?
-ds_hash_mask		dd ?
-ds_hash_shift		dd ?
-ds_block_start		dd ?
-ds_match_length		dd ?	; used
-ds_prev_match		dd ?	; used
-ds_match_available	dd ?
-ds_strstart		dd ?	; used
-ds_match_start		dd ?	; used
-ds_lookahead		dd ?	; used
-ds_prev_length		dd ?	; used
-ds_max_chain_length	dd ?	; used
-ds_max_laxy_match	dd ?
-ds_level		dd ?
-ds_strategy		dd ?
-ds_good_match		dd ?	; used
-ds_nice_match		dd ?	; used
-
-; Don't need anymore of the struct for match
-DEFLATE_STATE	ENDS
-
-;===========================================================================
-; CODE
-;===========================================================================
-_TEXT	SEGMENT
-
-;---------------------------------------------------------------------------
-; match_init
-;---------------------------------------------------------------------------
-	ALIGN	4
-PUBLIC	_match_init
-_match_init	PROC
-	; no initialization needed
-	ret
-_match_init	ENDP
-
-;---------------------------------------------------------------------------
-; uInt longest_match(deflate_state *deflatestate, IPos curmatch)
-;---------------------------------------------------------------------------
-	ALIGN	4
-
-PUBLIC	_longest_match
-_longest_match	PROC
-
-; Since this code uses EBP for a scratch register, the stack frame must
-; be manually constructed and referenced relative to the ESP register.
-
-; Stack image
-; Variables
-chainlenwmask	=  0	; high word: current chain len
-			; low word: s->wmask
-window		=  4	; local copy of s->window
-windowbestlen	=  8	; s->window + bestlen
-scanend		= 12	; last two bytes of string
-scanstart	= 16	; first two bytes of string
-scanalign	= 20	; dword-misalignment of string
-nicematch	= 24	; a good enough match size
-bestlen		= 28	; size of best match so far
-scan		= 32	; ptr to string wanting match
-varsize		= 36	; number of bytes (also offset to last saved register)
-
-; Saved Registers (actually pushed into place)
-ebx_save	= 36
-edi_save	= 40
-esi_save	= 44
-ebp_save	= 48
-
-; Parameters
-retaddr		= 52
-deflatestate	= 56
-curmatch	= 60
-
-; Save registers that the compiler may be using
-	push	ebp
-	push	edi
-	push	esi
-	push	ebx
-
-; Allocate local variable space
-	sub	esp,varsize
-
-; Retrieve the function arguments. ecx will hold cur_match
-; throughout the entire function. edx will hold the pointer to the
-; deflate_state structure during the function's setup (before
-; entering the main loop).
-
-	mov	edx, [esp+deflatestate]
-ASSUME	edx:PTR DEFLATE_STATE
-
-	mov	ecx, [esp+curmatch]
-
-; uInt wmask = s->w_mask;
-; unsigned chain_length = s->max_chain_length;
-; if (s->prev_length >= s->good_match) {
-;     chain_length >>= 2;
-; }
-
-	mov	eax, [edx].ds_prev_length
-	mov	ebx, [edx].ds_good_match
-	cmp	eax, ebx
-	mov	eax, [edx].ds_w_mask
-	mov	ebx, [edx].ds_max_chain_length
-	jl	SHORT LastMatchGood
-	shr	ebx, 2
-LastMatchGood:
-
-; chainlen is decremented once beforehand so that the function can
-; use the sign flag instead of the zero flag for the exit test.
-; It is then shifted into the high word, to make room for the wmask
-; value, which it will always accompany.
-
-	dec	ebx
-	shl	ebx, 16
-	or	ebx, eax
-	mov	[esp+chainlenwmask], ebx
-
-; if ((uInt)nice_match > s->lookahead) nice_match = s->lookahead;
-
-	mov	eax, [edx].ds_nice_match
-	mov	ebx, [edx].ds_lookahead
-	cmp	ebx, eax
-	jl	SHORT LookaheadLess
-	mov	ebx, eax
-LookaheadLess:
-	mov	[esp+nicematch], ebx
-
-;/* register Bytef *scan = s->window + s->strstart;                     */
-
-	mov	esi, [edx].ds_window
-	mov	[esp+window], esi
-	mov	ebp, [edx].ds_strstart
-	lea	edi, [esi+ebp]
-	mov	[esp+scan],edi
-
-;/* Determine how many bytes the scan ptr is off from being             */
-;/* dword-aligned.                                                      */
-
-	mov	eax, edi
-	neg	eax
-	and	eax, 3
-	mov	[esp+scanalign], eax
-
-;/* IPos limit = s->strstart > (IPos)MAX_DIST(s) ?                      */
-;/*     s->strstart - (IPos)MAX_DIST(s) : NIL;                          */
-
-	mov	eax, [edx].ds_w_size
-	sub	eax, MIN_LOOKAHEAD
-	sub	ebp, eax
-	jg	SHORT LimitPositive
-	xor	ebp, ebp
-LimitPositive:
-
-;/* int best_len = s->prev_length;                                      */
-
-	mov	eax, [edx].ds_prev_length
-	mov	[esp+bestlen], eax
-
-;/* Store the sum of s->window + best_len in %esi locally, and in %esi. */
-
-	add	esi, eax
-	mov	[esp+windowbestlen], esi
-
-;/* register ush scan_start = *(ushf*)scan;                             */
-;/* register ush scan_end   = *(ushf*)(scan+best_len-1);                */
-;/* Posf *prev = s->prev;                                               */
-
-	movzx	ebx, WORD PTR[edi]
-	mov	[esp+scanstart], ebx
-	movzx	ebx, WORD PTR[eax+edi-1]
-	mov	[esp+scanend], ebx
-	mov	edi, [edx].ds_prev
-
-;/* Jump into the main loop.                                            */
-
-	mov	edx, [esp+chainlenwmask]
-	jmp	SHORT LoopEntry
-
-;/* do {
-; *     match = s->window + cur_match;
-; *     if (*(ushf*)(match+best_len-1) != scan_end ||
-; *         *(ushf*)match != scan_start) continue;
-; *     [...]
-; * } while ((cur_match = prev[cur_match & wmask]) > limit
-; *          && --chain_length != 0);
-; *
-; * Here is the inner loop of the function. The function will spend the
-; * majority of its time in this loop, and majority of that time will
-; * be spent in the first ten instructions.
-; *
-; * Within this loop:
-; * %ebx = scanend
-; * %ecx = curmatch
-; * %edx = chainlenwmask - i.e., ((chainlen << 16) | wmask)
-; * %esi = windowbestlen - i.e., (window + bestlen)
-; * %edi = prev
-; * %ebp = limit
-; */
-
-	ALIGN	4
-LookupLoop:
-	and	ecx, edx
-	movzx	ecx, WORD PTR[edi+ecx*2]
-	cmp	ecx, ebp
-	jbe	LeaveNow
-	sub	edx, 000010000H
-	js	LeaveNow
-
-LoopEntry:
-	movzx	eax, WORD PTR[esi+ecx-1]
-	cmp	eax, ebx
-	jnz	SHORT LookupLoop
-
-	mov	eax, [esp+window]
-	movzx	eax, WORD PTR[eax+ecx]
-	cmp	eax, [esp+scanstart]
-	jnz	SHORT LookupLoop
-
-;/* Store the current value of chainlen.                                */
-
-	mov	[esp+chainlenwmask], edx
-
-;/* Point %edi to the string under scrutiny, and %esi to the string we  */
-;/* are hoping to match it up with. In actuality, %esi and %edi are     */
-;/* both pointed (MAX_MATCH_8 - scanalign) bytes ahead, and %edx is     */
-;/* initialized to -(MAX_MATCH_8 - scanalign).                          */
-
-	mov	esi, [esp+window]
-	mov	edi, [esp+scan]
-	add	esi, ecx
-	mov	eax, [esp+scanalign]
-	mov	edx, -MAX_MATCH_8
-	lea	edi, [edi+eax+MAX_MATCH_8]
-	lea	esi, [esi+eax+MAX_MATCH_8]
-
-;/* Test the strings for equality, 8 bytes at a time. At the end,
-; * adjust %edx so that it is offset to the exact byte that mismatched.
-; *
-; * We already know at this point that the first three bytes of the
-; * strings match each other, and they can be safely passed over before
-; * starting the compare loop. So what this code does is skip over 0-3
-; * bytes, as much as necessary in order to dword-align the %edi
-; * pointer. (%esi will still be misaligned three times out of four.)
-; *
-; * It should be confessed that this loop usually does not represent
-; * much of the total running time. Replacing it with a more
-; * straightforward "rep cmpsb" would not drastically degrade
-; * performance.
-; */
-
-LoopCmps:
-	mov	eax, DWORD PTR[esi+edx]
-	xor	eax, DWORD PTR[edi+edx]
-	jnz	SHORT LeaveLoopCmps
-
-	mov	eax, DWORD PTR[esi+edx+4]
-	xor	eax, DWORD PTR[edi+edx+4]
-	jnz	SHORT LeaveLoopCmps4
-
-	add	edx, 8
-	jnz	SHORT LoopCmps
-	jmp	LenMaximum
-	ALIGN	4
-
-LeaveLoopCmps4:
-	add	edx, 4
-
-LeaveLoopCmps:
-	test	eax, 00000FFFFH
-	jnz	SHORT LenLower
-
-	add	edx, 2
-	shr	eax, 16
-
-LenLower:
-	sub	al, 1
-	adc	edx, 0
-
-;/* Calculate the length of the match. If it is longer than MAX_MATCH,  */
-;/* then automatically accept it as the best possible match and leave.  */
-
-	lea	eax, [edi+edx]
-	mov	edi, [esp+scan]
-	sub	eax, edi
-	cmp	eax, MAX_MATCH
-	jge	SHORT LenMaximum
-
-;/* If the length of the match is not longer than the best match we     */
-;/* have so far, then forget it and return to the lookup loop.          */
-
-	mov	edx, [esp+deflatestate]
-	mov	ebx, [esp+bestlen]
-	cmp	eax, ebx
-	jg	SHORT LongerMatch
-	mov	esi, [esp+windowbestlen]
-	mov	edi, [edx].ds_prev
-	mov	ebx, [esp+scanend]
-	mov	edx, [esp+chainlenwmask]
-	jmp	LookupLoop
-	ALIGN	4
-
-;/*         s->match_start = cur_match;                                 */
-;/*         best_len = len;                                             */
-;/*         if (len >= nice_match) break;                               */
-;/*         scan_end = *(ushf*)(scan+best_len-1);                       */
-
-LongerMatch:
-	mov	ebx, [esp+nicematch]
-	mov	[esp+bestlen], eax
-	mov	[edx].ds_match_start, ecx
-	cmp	eax, ebx
-	jge	SHORT LeaveNow
-	mov	esi, [esp+window]
-	add	esi, eax
-	mov	[esp+windowbestlen], esi
-	movzx	ebx, WORD PTR[edi+eax-1]
-	mov	edi, [edx].ds_prev
-	mov	[esp+scanend], ebx
-	mov	edx, [esp+chainlenwmask]
-	jmp	LookupLoop
-	ALIGN	4
-
-;/* Accept the current string, with the maximum possible length.        */
-
-LenMaximum:
-	mov	edx, [esp+deflatestate]
-	mov	DWORD PTR[esp+bestlen], MAX_MATCH
-	mov	[edx].ds_match_start, ecx
-
-;/* if ((uInt)best_len <= s->lookahead) return (uInt)best_len;          */
-;/* return s->lookahead;                                                */
-
-LeaveNow:
-	mov	edx, [esp+deflatestate]
-	mov	ebx, [esp+bestlen]
-	mov	eax, [edx].ds_lookahead
-	cmp	ebx, eax
-	jg	SHORT LookaheadRet
-	mov	eax, ebx
-LookaheadRet:
-
-; Restore the stack and return from whence we came.
-
-	add	esp, varsize
-	pop	ebx
-	pop	esi
-	pop	edi
-	pop	ebp
-	ret
-
-_longest_match	ENDP
-
-_TEXT	ENDS
-END

contrib/masmx64/gvmat64.asm

@@ -2,8 +2,10 @@
 ;    deflate_state *s,
 ;    IPos cur_match);                             /* current match */
 
-; gvmat64.asm -- Asm portion of the optimized longest_match for 32 bits x86
+; gvmat64.asm -- Asm portion of the optimized longest_match for 32 bits x86_64
-; Copyright (C) 1995-2005 Jean-loup Gailly, Brian Raiter and Gilles Vollant.
+;  (AMD64 on Athlon 64, Opteron, Phenom
+;     and Intel EM64T on Pentium 4 with EM64T, Pentium D, Core 2 Duo, Core I5/I7)
+; Copyright (C) 1995-2010 Jean-loup Gailly, Brian Raiter and Gilles Vollant.
 ;
 ; File written by Gilles Vollant, by converting to assembly the longest_match
 ;  from Jean-loup Gailly in deflate.c of zLib and infoZip zip.
@@ -11,6 +13,24 @@
 ;  and by taking inspiration on asm686 with masm, optimised assembly code
 ;        from Brian Raiter, written 1998
 ;
+;  This software is provided 'as-is', without any express or implied
+;  warranty.  In no event will the authors be held liable for any damages
+;  arising from the use of this software.
+;
+;  Permission is granted to anyone to use this software for any purpose,
+;  including commercial applications, and to alter it and redistribute it
+;  freely, subject to the following restrictions:
+;
+;  1. The origin of this software must not be misrepresented; you must not
+;     claim that you wrote the original software. If you use this software
+;     in a product, an acknowledgment in the product documentation would be
+;     appreciated but is not required.
+;  2. Altered source versions must be plainly marked as such, and must not be
+;     misrepresented as being the original software
+;  3. This notice may not be removed or altered from any source distribution.
+;
+;
+;
 ;         http://www.zlib.net
 ;         http://www.winimage.com/zLibDll
 ;         http://www.muppetlabs.com/~breadbox/software/assembly.html
@@ -26,10 +46,10 @@
 ;
 ; This file compile with Microsoft Macro Assembler (x64) for AMD64
 ;
-;   ml64.exe is given with Visual Studio 2005 and Windows 2003 server DDK
+;   ml64.exe is given with Visual Studio 2005/2008/2010 and Windows WDK
 ;
-;   (you can get Windows 2003 server DDK with ml64 and cl for AMD64 from
+;   (you can get Windows WDK with ml64 for AMD64 from
-;      http://www.microsoft.com/whdc/devtools/ddk/default.mspx for low price)
+;      http://www.microsoft.com/whdc/Devtools/wdk/default.mspx for low price)
 ;
 
 
@@ -71,6 +91,25 @@ save_r13        equ  rsp + 64 - LocalVarsSize
 ;save_r15        equ  rsp + 80 - LocalVarsSize
 
 
+; summary of register usage
+; scanend     ebx
+; scanendw    bx
+; chainlenwmask   edx
+; curmatch    rsi
+; curmatchd   esi
+; windowbestlen   r8
+; scanalign   r9
+; scanalignd  r9d
+; window      r10
+; bestlen     r11
+; bestlend    r11d
+; scanstart   r12d
+; scanstartw  r12w
+; scan        r13
+; nicematch   r14d
+; limit       r15
+; limitd      r15d
+; prev        rcx
 
 ;  all the +4 offsets are due to the addition of pending_buf_size (in zlib
 ;  in the deflate_state structure since the asm code was first written
@@ -406,7 +445,8 @@ LoopCmps:
 
         add rdx,8+8+8
 
-        jmp short LoopCmps
+        jnz short LoopCmps
+        jmp short LenMaximum
 LeaveLoopCmps16: add rdx,8
 LeaveLoopCmps8: add rdx,8
 LeaveLoopCmps:

contrib/masmx64/inffas8664.c

@@ -111,11 +111,11 @@ unsigned start;         /* inflate()'s starting value for strm->avail_out */
     type_ar ar;
     void inffas8664fnc(struct inffast_ar * par);
 
-    
+
 
 #if (defined( __GNUC__ ) && defined( __amd64__ ) && ! defined( __i386 )) || (defined(_MSC_VER) && defined(_M_AMD64))
 #define PAD_AVAIL_IN 6
-#define PAD_AVAIL_OUT 258    
+#define PAD_AVAIL_OUT 258
 #else
 #define PAD_AVAIL_IN 5
 #define PAD_AVAIL_OUT 257
@@ -130,7 +130,7 @@ unsigned start;         /* inflate()'s starting value for strm->avail_out */
     ar.beg = ar.out - (start - strm->avail_out);
     ar.end = ar.out + (strm->avail_out - PAD_AVAIL_OUT);
     ar.wsize = state->wsize;
-    ar.write = state->write;
+    ar.write = state->wnext;
     ar.window = state->window;
     ar.hold = state->hold;
     ar.bits = state->bits;

contrib/masmx64/inffasx64.asm

@@ -9,11 +9,15 @@
 ;   ml64.exe /Flinffasx64 /c /Zi inffasx64.asm
 ;   with Microsoft Macro Assembler (x64) for AMD64
 ;
-;   ml64.exe is given with Visual Studio 2005, Windows 2003 server DDK
+
+; This file compile with Microsoft Macro Assembler (x64) for AMD64
 ;
-;   (you can get Windows 2003 server DDK with ml64 and cl.exe for AMD64 from 
+;   ml64.exe is given with Visual Studio 2005/2008/2010 and Windows WDK
-;      http://www.microsoft.com/whdc/devtools/ddk/default.mspx for low price)
 ;
+;   (you can get Windows WDK with ml64 for AMD64 from
+;      http://www.microsoft.com/whdc/Devtools/wdk/default.mspx for low price)
+;
+
 
 .code
 inffas8664fnc PROC
@@ -379,7 +383,7 @@ L_break_loop_with_status:
 	mov r14,[rsp-40]
 	mov r15,[rsp-48]
 	mov rbx,[rsp-56]
-	
+
     ret 0
 ;          :
 ;          : "m" (ar)

contrib/masmx64/readme.txt

@@ -12,7 +12,10 @@ inffasx64.asm and inffas8664.c were written by Chris Anderson, by optimizing
 
 Use instructions
 ----------------
-Copy these files into the zlib source directory.
+Assemble the .asm files using MASM and put the object files into the zlib source
+directory.  You can also get object files here:
+
+     http://www.winimage.com/zLibDll/zlib124_masm_obj.zip
 
 define ASMV and ASMINF in your project. Include inffas8664.c in your source tree,
 and inffasx64.obj and gvmat64.obj as object to link.
@@ -24,5 +27,5 @@ run bld_64.bat with Microsoft Macro Assembler (x64) for AMD64 (ml64.exe)
 
 ml64.exe is given with Visual Studio 2005, Windows 2003 server DDK
 
-You can get Windows 2003 server DDK with ml64 and cl for AMD64 from 
+You can get Windows 2003 server DDK with ml64 and cl for AMD64 from
   http://www.microsoft.com/whdc/devtools/ddk/default.mspx for low price)

contrib/masmx86/bld_ml32.bat

@@ -1,2 +1,2 @@
-ml /coff /Zi /c /Flgvmat32.lst  gvmat32.asm 
+ml /coff /Zi /c /Flmatch686.lst match686.asm
-ml /coff /Zi /c /Flinffas32.lst inffas32.asm 
+ml /coff /Zi /c /Flinffas32.lst inffas32.asm

contrib/masmx86/gvmat32.asm

@@ -1,972 +0,0 @@
-; gvmat32.asm -- Asm portion of the optimized longest_match for 32 bits x86
-; Copyright (C) 1995-1996 Jean-loup Gailly and Gilles Vollant.
-; File written by Gilles Vollant, by modifiying the longest_match
-;  from Jean-loup Gailly in deflate.c
-;
-;         http://www.zlib.net
-;         http://www.winimage.com/zLibDll
-;         http://www.muppetlabs.com/~breadbox/software/assembly.html
-;
-; For Visual C++ 4.x and higher and ML 6.x and higher
-;   ml.exe is in directory \MASM611C of Win95 DDK
-;   ml.exe is also distributed in http://www.masm32.com/masmdl.htm
-;    and in VC++2003 toolkit at http://msdn.microsoft.com/visualc/vctoolkit2003/
-;
-; this file contain two implementation of longest_match
-;
-;  longest_match_7fff : written 1996 by Gilles Vollant optimized for 
-;            first Pentium. Assume s->w_mask == 0x7fff
-;  longest_match_686 : written by Brian raiter (1998), optimized for Pentium Pro
-;
-;  for using an seembly version of longest_match, you need define ASMV in project
-;  There is two way in using gvmat32.asm
-;
-;  A) Suggested method
-;    if you want include both longest_match_7fff and longest_match_686
-;    compile the asm file running
-;           ml /coff /Zi /Flgvmat32.lst /c gvmat32.asm
-;    and include gvmat32c.c in your project
-;    if you have an old cpu (386,486 or first Pentium) and s->w_mask==0x7fff,
-;        longest_match_7fff will be used
-;    if you have a more modern CPU (Pentium Pro, II and higher)
-;        longest_match_686 will be used
-;    on old cpu with s->w_mask!=0x7fff, longest_match_686 will be used,
-;        but this is not a sitation you'll find often
-;
-;  B) Alternative
-;    if you are not interresed in old cpu performance and want the smaller
-;       binaries possible
-;
-;    compile the asm file running
-;           ml /coff /Zi /c /Flgvmat32.lst /DNOOLDPENTIUMCODE gvmat32.asm
-;    and do not include gvmat32c.c in your project (ou define also 
-;              NOOLDPENTIUMCODE)
-;
-; note : as I known, longest_match_686 is very faster than longest_match_7fff
-;        on pentium Pro/II/III, faster (but less) in P4, but it seem
-;        longest_match_7fff can be faster (very very litte) on AMD Athlon64/K8
-;
-; see below : zlib1222add must be adjuster if you use a zlib version < 1.2.2.2
-
-;uInt longest_match_7fff(s, cur_match)
-;    deflate_state *s;
-;    IPos cur_match;                             /* current match */
-
-    NbStack         equ     76
-    cur_match       equ     dword ptr[esp+NbStack-0]
-    str_s           equ     dword ptr[esp+NbStack-4]
-; 5 dword on top (ret,ebp,esi,edi,ebx)
-    adrret          equ     dword ptr[esp+NbStack-8]
-    pushebp         equ     dword ptr[esp+NbStack-12]
-    pushedi         equ     dword ptr[esp+NbStack-16]
-    pushesi         equ     dword ptr[esp+NbStack-20]
-    pushebx         equ     dword ptr[esp+NbStack-24]
-
-    chain_length    equ     dword ptr [esp+NbStack-28]
-    limit           equ     dword ptr [esp+NbStack-32]
-    best_len        equ     dword ptr [esp+NbStack-36]
-    window          equ     dword ptr [esp+NbStack-40]
-    prev            equ     dword ptr [esp+NbStack-44]
-    scan_start      equ      word ptr [esp+NbStack-48]
-    wmask           equ     dword ptr [esp+NbStack-52]
-    match_start_ptr equ     dword ptr [esp+NbStack-56]
-    nice_match      equ     dword ptr [esp+NbStack-60]
-    scan            equ     dword ptr [esp+NbStack-64]
-
-    windowlen       equ     dword ptr [esp+NbStack-68]
-    match_start     equ     dword ptr [esp+NbStack-72]
-    strend          equ     dword ptr [esp+NbStack-76]
-    NbStackAdd      equ     (NbStack-24)
-
-    .386p
-
-    name    gvmatch
-    .MODEL  FLAT
-
-
-
-;  all the +zlib1222add offsets are due to the addition of fields
-;  in zlib in the deflate_state structure since the asm code was first written
-;  (if you compile with zlib 1.0.4 or older, use "zlib1222add equ (-4)").
-;  (if you compile with zlib between 1.0.5 and 1.2.2.1, use "zlib1222add equ 0").
-;  if you compile with zlib 1.2.2.2 or later , use "zlib1222add equ 8").
-
-    zlib1222add         equ     8
-
-;  Note : these value are good with a 8 bytes boundary pack structure
-    dep_chain_length    equ     74h+zlib1222add
-    dep_window          equ     30h+zlib1222add
-    dep_strstart        equ     64h+zlib1222add
-    dep_prev_length     equ     70h+zlib1222add
-    dep_nice_match      equ     88h+zlib1222add
-    dep_w_size          equ     24h+zlib1222add
-    dep_prev            equ     38h+zlib1222add
-    dep_w_mask          equ     2ch+zlib1222add
-    dep_good_match      equ     84h+zlib1222add
-    dep_match_start     equ     68h+zlib1222add
-    dep_lookahead       equ     6ch+zlib1222add
-
-
-_TEXT                   segment
-
-IFDEF NOUNDERLINE
-   IFDEF NOOLDPENTIUMCODE
-            public  longest_match
-            public  match_init
-   ELSE            
-            public  longest_match_7fff
-            public  cpudetect32
-            public  longest_match_686
-   ENDIF
-ELSE
-   IFDEF NOOLDPENTIUMCODE
-            public  _longest_match
-            public  _match_init
-   ELSE
-            public  _longest_match_7fff
-            public  _cpudetect32
-            public  _longest_match_686
-   ENDIF
-ENDIF
-
-    MAX_MATCH           equ     258
-    MIN_MATCH           equ     3
-    MIN_LOOKAHEAD       equ     (MAX_MATCH+MIN_MATCH+1)
-
-
-
-IFNDEF NOOLDPENTIUMCODE
-IFDEF NOUNDERLINE
-longest_match_7fff   proc near
-ELSE
-_longest_match_7fff  proc near
-ENDIF
-
-    mov     edx,[esp+4]
-
-
-
-    push    ebp
-    push    edi
-    push    esi
-    push    ebx
-
-    sub     esp,NbStackAdd
-
-; initialize or check the variables used in match.asm.
-    mov     ebp,edx
-
-; chain_length = s->max_chain_length
-; if (prev_length>=good_match) chain_length >>= 2
-    mov     edx,[ebp+dep_chain_length]
-    mov     ebx,[ebp+dep_prev_length]
-    cmp     [ebp+dep_good_match],ebx
-    ja      noshr
-    shr     edx,2
-noshr:
-; we increment chain_length because in the asm, the --chain_lenght is in the beginning of the loop
-    inc     edx
-    mov     edi,[ebp+dep_nice_match]
-    mov     chain_length,edx
-    mov     eax,[ebp+dep_lookahead]
-    cmp     eax,edi
-; if ((uInt)nice_match > s->lookahead) nice_match = s->lookahead;
-    jae     nolookaheadnicematch
-    mov     edi,eax
-nolookaheadnicematch:
-; best_len = s->prev_length
-    mov     best_len,ebx
-
-; window = s->window
-    mov     esi,[ebp+dep_window]
-    mov     ecx,[ebp+dep_strstart]
-    mov     window,esi
-
-    mov     nice_match,edi
-; scan = window + strstart
-    add     esi,ecx
-    mov     scan,esi
-; dx = *window
-    mov     dx,word ptr [esi]
-; bx = *(window+best_len-1)
-    mov     bx,word ptr [esi+ebx-1]
-    add     esi,MAX_MATCH-1
-; scan_start = *scan
-    mov     scan_start,dx
-; strend = scan + MAX_MATCH-1
-    mov     strend,esi
-; bx = scan_end = *(window+best_len-1)
-
-;    IPos limit = s->strstart > (IPos)MAX_DIST(s) ?
-;        s->strstart - (IPos)MAX_DIST(s) : NIL;
-
-    mov     esi,[ebp+dep_w_size]
-    sub     esi,MIN_LOOKAHEAD
-; here esi = MAX_DIST(s)
-    sub     ecx,esi
-    ja      nodist
-    xor     ecx,ecx
-nodist:
-    mov     limit,ecx
-
-; prev = s->prev
-    mov     edx,[ebp+dep_prev]
-    mov     prev,edx
-
-;
-    mov     edx,dword ptr [ebp+dep_match_start]
-    mov     bp,scan_start
-    mov     eax,cur_match
-    mov     match_start,edx
-
-    mov     edx,window
-    mov     edi,edx
-    add     edi,best_len
-    mov     esi,prev
-    dec     edi
-; windowlen = window + best_len -1
-    mov     windowlen,edi
-
-    jmp     beginloop2
-    align   4
-
-; here, in the loop
-;       eax = ax = cur_match
-;       ecx = limit
-;        bx = scan_end
-;        bp = scan_start
-;       edi = windowlen (window + best_len -1)
-;       esi = prev
-
-
-;// here; chain_length <=16
-normalbeg0add16:
-    add     chain_length,16
-    jz      exitloop
-normalbeg0:
-    cmp     word ptr[edi+eax],bx
-    je      normalbeg2noroll
-rcontlabnoroll:
-; cur_match = prev[cur_match & wmask]
-    and     eax,7fffh
-    mov     ax,word ptr[esi+eax*2]
-; if cur_match > limit, go to exitloop
-    cmp     ecx,eax
-    jnb     exitloop
-; if --chain_length != 0, go to exitloop
-    dec     chain_length
-    jnz     normalbeg0
-    jmp     exitloop
-
-normalbeg2noroll:
-; if (scan_start==*(cur_match+window)) goto normalbeg2
-    cmp     bp,word ptr[edx+eax]
-    jne     rcontlabnoroll
-    jmp     normalbeg2
-
-contloop3:
-    mov     edi,windowlen
-
-; cur_match = prev[cur_match & wmask]
-    and     eax,7fffh
-    mov     ax,word ptr[esi+eax*2]
-; if cur_match > limit, go to exitloop
-    cmp     ecx,eax
-jnbexitloopshort1:
-    jnb     exitloop
-; if --chain_length != 0, go to exitloop
-
-
-; begin the main loop
-beginloop2:
-    sub     chain_length,16+1
-; if chain_length <=16, don't use the unrolled loop
-    jna     normalbeg0add16
-
-do16:
-    cmp     word ptr[edi+eax],bx
-    je      normalbeg2dc0
-
-maccn   MACRO   lab
-    and     eax,7fffh
-    mov     ax,word ptr[esi+eax*2]
-    cmp     ecx,eax
-    jnb     exitloop
-    cmp     word ptr[edi+eax],bx
-    je      lab
-    ENDM
-
-rcontloop0:
-    maccn   normalbeg2dc1
-
-rcontloop1:
-    maccn   normalbeg2dc2
-
-rcontloop2:
-    maccn   normalbeg2dc3
-
-rcontloop3:
-    maccn   normalbeg2dc4
-
-rcontloop4:
-    maccn   normalbeg2dc5
-
-rcontloop5:
-    maccn   normalbeg2dc6
-
-rcontloop6:
-    maccn   normalbeg2dc7
-
-rcontloop7:
-    maccn   normalbeg2dc8
-
-rcontloop8:
-    maccn   normalbeg2dc9
-
-rcontloop9:
-    maccn   normalbeg2dc10
-
-rcontloop10:
-    maccn   short normalbeg2dc11
-
-rcontloop11:
-    maccn   short normalbeg2dc12
-
-rcontloop12:
-    maccn   short normalbeg2dc13
-
-rcontloop13:
-    maccn   short normalbeg2dc14
-
-rcontloop14:
-    maccn   short normalbeg2dc15
-
-rcontloop15:
-    and     eax,7fffh
-    mov     ax,word ptr[esi+eax*2]
-    cmp     ecx,eax
-    jnb     exitloop
-
-    sub     chain_length,16
-    ja      do16
-    jmp     normalbeg0add16
-
-;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
-
-normbeg MACRO   rcontlab,valsub
-; if we are here, we know that *(match+best_len-1) == scan_end
-    cmp     bp,word ptr[edx+eax]
-; if (match != scan_start) goto rcontlab
-    jne     rcontlab
-; calculate the good chain_length, and we'll compare scan and match string
-    add     chain_length,16-valsub
-    jmp     iseq
-    ENDM
-
-
-normalbeg2dc11:
-    normbeg rcontloop11,11
-
-normalbeg2dc12:
-    normbeg short rcontloop12,12
-
-normalbeg2dc13:
-    normbeg short rcontloop13,13
-
-normalbeg2dc14:
-    normbeg short rcontloop14,14
-
-normalbeg2dc15:
-    normbeg short rcontloop15,15
-
-normalbeg2dc10:
-    normbeg rcontloop10,10
-
-normalbeg2dc9:
-    normbeg rcontloop9,9
-
-normalbeg2dc8:
-    normbeg rcontloop8,8
-
-normalbeg2dc7:
-    normbeg rcontloop7,7
-
-normalbeg2dc6:
-    normbeg rcontloop6,6
-
-normalbeg2dc5:
-    normbeg rcontloop5,5
-
-normalbeg2dc4:
-    normbeg rcontloop4,4
-
-normalbeg2dc3:
-    normbeg rcontloop3,3
-
-normalbeg2dc2:
-    normbeg rcontloop2,2
-
-normalbeg2dc1:
-    normbeg rcontloop1,1
-
-normalbeg2dc0:
-    normbeg rcontloop0,0
-
-
-; we go in normalbeg2 because *(ushf*)(match+best_len-1) == scan_end
-
-normalbeg2:
-    mov     edi,window
-
-    cmp     bp,word ptr[edi+eax]
-    jne     contloop3                   ; if *(ushf*)match != scan_start, continue
-
-iseq:
-; if we are here, we know that *(match+best_len-1) == scan_end
-; and (match == scan_start)
-
-    mov     edi,edx
-    mov     esi,scan                    ; esi = scan
-    add     edi,eax                     ; edi = window + cur_match = match
-
-    mov     edx,[esi+3]                 ; compare manually dword at match+3
-    xor     edx,[edi+3]                 ; and scan +3
-
-    jz      begincompare                ; if equal, go to long compare
-
-; we will determine the unmatch byte and calculate len (in esi)
-    or      dl,dl
-    je      eq1rr
-    mov     esi,3
-    jmp     trfinval
-eq1rr:
-    or      dx,dx
-    je      eq1
-
-    mov     esi,4
-    jmp     trfinval
-eq1:
-    and     edx,0ffffffh
-    jz      eq11
-    mov     esi,5
-    jmp     trfinval
-eq11:
-    mov     esi,6
-    jmp     trfinval
-
-begincompare:
-    ; here we now scan and match begin same
-    add     edi,6
-    add     esi,6
-    mov     ecx,(MAX_MATCH-(2+4))/4     ; scan for at most MAX_MATCH bytes
-    repe    cmpsd                       ; loop until mismatch
-
-    je      trfin                       ; go to trfin if not unmatch
-; we determine the unmatch byte
-    sub     esi,4
-    mov     edx,[edi-4]
-    xor     edx,[esi]
-
-    or      dl,dl
-    jnz     trfin
-    inc     esi
-
-    or      dx,dx
-    jnz     trfin
-    inc     esi
-
-    and     edx,0ffffffh
-    jnz     trfin
-    inc     esi
-
-trfin:
-    sub     esi,scan          ; esi = len
-trfinval:
-; here we have finised compare, and esi contain len of equal string
-    cmp     esi,best_len        ; if len > best_len, go newbestlen
-    ja      short newbestlen
-; now we restore edx, ecx and esi, for the big loop
-    mov     esi,prev
-    mov     ecx,limit
-    mov     edx,window
-    jmp     contloop3
-
-newbestlen:
-    mov     best_len,esi        ; len become best_len
-
-    mov     match_start,eax     ; save new position as match_start
-    cmp     esi,nice_match      ; if best_len >= nice_match, exit
-    jae     exitloop
-    mov     ecx,scan
-    mov     edx,window          ; restore edx=window
-    add     ecx,esi
-    add     esi,edx
-
-    dec     esi
-    mov     windowlen,esi       ; windowlen = window + best_len-1
-    mov     bx,[ecx-1]          ; bx = *(scan+best_len-1) = scan_end
-
-; now we restore ecx and esi, for the big loop :
-    mov     esi,prev
-    mov     ecx,limit
-    jmp     contloop3
-
-exitloop:
-; exit : s->match_start=match_start
-    mov     ebx,match_start
-    mov     ebp,str_s
-    mov     ecx,best_len
-    mov     dword ptr [ebp+dep_match_start],ebx
-    mov     eax,dword ptr [ebp+dep_lookahead]
-    cmp     ecx,eax
-    ja      minexlo
-    mov     eax,ecx
-minexlo:
-; return min(best_len,s->lookahead)
-
-; restore stack and register ebx,esi,edi,ebp
-    add     esp,NbStackAdd
-
-    pop     ebx
-    pop     esi
-    pop     edi
-    pop     ebp
-    ret
-InfoAuthor:
-; please don't remove this string !
-; Your are free use gvmat32 in any fre or commercial apps if you don't remove the string in the binary!
-    db     0dh,0ah,"GVMat32 optimised assembly code written 1996-98 by Gilles Vollant",0dh,0ah
-
-
-
-IFDEF NOUNDERLINE
-longest_match_7fff   endp
-ELSE
-_longest_match_7fff  endp
-ENDIF
-
-
-IFDEF NOUNDERLINE
-cpudetect32     proc near
-ELSE
-_cpudetect32    proc near
-ENDIF
-
-    push    ebx
-
-    pushfd                  ; push original EFLAGS
-    pop     eax             ; get original EFLAGS
-    mov     ecx, eax        ; save original EFLAGS
-    xor     eax, 40000h     ; flip AC bit in EFLAGS
-    push    eax             ; save new EFLAGS value on stack
-    popfd                   ; replace current EFLAGS value
-    pushfd                  ; get new EFLAGS
-    pop     eax             ; store new EFLAGS in EAX
-    xor     eax, ecx        ; can<61>t toggle AC bit, processor=80386
-    jz      end_cpu_is_386  ; jump if 80386 processor
-    push    ecx
-    popfd                   ; restore AC bit in EFLAGS first
-
-    pushfd
-    pushfd
-    pop     ecx
-
-    mov     eax, ecx        ; get original EFLAGS
-    xor     eax, 200000h    ; flip ID bit in EFLAGS
-    push    eax             ; save new EFLAGS value on stack
-    popfd                   ; replace current EFLAGS value
-    pushfd                  ; get new EFLAGS
-    pop     eax             ; store new EFLAGS in EAX
-    popfd                   ; restore original EFLAGS
-    xor     eax, ecx        ; can<61>t toggle ID bit,
-    je      is_old_486      ; processor=old
-
-    mov     eax,1
-    db      0fh,0a2h        ;CPUID
-
-exitcpudetect:
-    pop ebx
-    ret
-
-end_cpu_is_386:
-    mov     eax,0300h
-    jmp     exitcpudetect
-
-is_old_486:
-    mov     eax,0400h
-    jmp     exitcpudetect
-
-IFDEF NOUNDERLINE
-cpudetect32     endp
-ELSE
-_cpudetect32    endp
-ENDIF
-ENDIF
-
-MAX_MATCH       equ     258
-MIN_MATCH       equ     3
-MIN_LOOKAHEAD   equ     (MAX_MATCH + MIN_MATCH + 1)
-MAX_MATCH_8_     equ     ((MAX_MATCH + 7) AND 0FFF0h)
-
-
-;;; stack frame offsets
-
-chainlenwmask   equ  esp + 0    ; high word: current chain len
-                    ; low word: s->wmask
-window      equ  esp + 4    ; local copy of s->window
-windowbestlen   equ  esp + 8    ; s->window + bestlen
-scanstart   equ  esp + 16   ; first two bytes of string
-scanend     equ  esp + 12   ; last two bytes of string
-scanalign   equ  esp + 20   ; dword-misalignment of string
-nicematch   equ  esp + 24   ; a good enough match size
-bestlen     equ  esp + 28   ; size of best match so far
-scan        equ  esp + 32   ; ptr to string wanting match
-
-LocalVarsSize   equ 36
-;   saved ebx   byte esp + 36
-;   saved edi   byte esp + 40
-;   saved esi   byte esp + 44
-;   saved ebp   byte esp + 48
-;   return address  byte esp + 52
-deflatestate    equ  esp + 56   ; the function arguments
-curmatch    equ  esp + 60
-
-;;; Offsets for fields in the deflate_state structure. These numbers
-;;; are calculated from the definition of deflate_state, with the
-;;; assumption that the compiler will dword-align the fields. (Thus,
-;;; changing the definition of deflate_state could easily cause this
-;;; program to crash horribly, without so much as a warning at
-;;; compile time. Sigh.)
-
-dsWSize     equ 36+zlib1222add
-dsWMask     equ 44+zlib1222add
-dsWindow    equ 48+zlib1222add
-dsPrev      equ 56+zlib1222add
-dsMatchLen  equ 88+zlib1222add
-dsPrevMatch equ 92+zlib1222add
-dsStrStart  equ 100+zlib1222add
-dsMatchStart    equ 104+zlib1222add
-dsLookahead equ 108+zlib1222add
-dsPrevLen   equ 112+zlib1222add
-dsMaxChainLen   equ 116+zlib1222add
-dsGoodMatch equ 132+zlib1222add
-dsNiceMatch equ 136+zlib1222add
-
-
-;;; match.asm -- Pentium-Pro-optimized version of longest_match()
-;;; Written for zlib 1.1.2
-;;; Copyright (C) 1998 Brian Raiter <breadbox@muppetlabs.com>
-;;; You can look at http://www.muppetlabs.com/~breadbox/software/assembly.html
-;;;
-;;; This is free software; you can redistribute it and/or modify it
-;;; under the terms of the GNU General Public License.
-
-;GLOBAL _longest_match, _match_init
-
-
-;SECTION    .text
-
-;;; uInt longest_match(deflate_state *deflatestate, IPos curmatch)
-
-;_longest_match:
-IFDEF NOOLDPENTIUMCODE
-    IFDEF NOUNDERLINE
-    longest_match       proc near
-    ELSE
-    _longest_match      proc near
-    ENDIF
-ELSE
-    IFDEF NOUNDERLINE
-    longest_match_686   proc near
-    ELSE
-    _longest_match_686  proc near
-    ENDIF
-ENDIF
-
-;;; Save registers that the compiler may be using, and adjust esp to
-;;; make room for our stack frame.
-
-        push    ebp
-        push    edi
-        push    esi
-        push    ebx
-        sub esp, LocalVarsSize
-
-;;; Retrieve the function arguments. ecx will hold cur_match
-;;; throughout the entire function. edx will hold the pointer to the
-;;; deflate_state structure during the function's setup (before
-;;; entering the main loop.
-
-        mov edx, [deflatestate]
-        mov ecx, [curmatch]
-
-;;; uInt wmask = s->w_mask;
-;;; unsigned chain_length = s->max_chain_length;
-;;; if (s->prev_length >= s->good_match) {
-;;;     chain_length >>= 2;
-;;; }
-
-        mov eax, [edx + dsPrevLen]
-        mov ebx, [edx + dsGoodMatch]
-        cmp eax, ebx
-        mov eax, [edx + dsWMask]
-        mov ebx, [edx + dsMaxChainLen]
-        jl  LastMatchGood
-        shr ebx, 2
-LastMatchGood:
-
-;;; chainlen is decremented once beforehand so that the function can
-;;; use the sign flag instead of the zero flag for the exit test.
-;;; It is then shifted into the high word, to make room for the wmask
-;;; value, which it will always accompany.
-
-        dec ebx
-        shl ebx, 16
-        or  ebx, eax
-        mov [chainlenwmask], ebx
-
-;;; if ((uInt)nice_match > s->lookahead) nice_match = s->lookahead;
-
-        mov eax, [edx + dsNiceMatch]
-        mov ebx, [edx + dsLookahead]
-        cmp ebx, eax
-        jl  LookaheadLess
-        mov ebx, eax
-LookaheadLess:  mov [nicematch], ebx
-
-;;; register Bytef *scan = s->window + s->strstart;
-
-        mov esi, [edx + dsWindow]
-        mov [window], esi
-        mov ebp, [edx + dsStrStart]
-        lea edi, [esi + ebp]
-        mov [scan], edi
-
-;;; Determine how many bytes the scan ptr is off from being
-;;; dword-aligned.
-
-        mov eax, edi
-        neg eax
-        and eax, 3
-        mov [scanalign], eax
-
-;;; IPos limit = s->strstart > (IPos)MAX_DIST(s) ?
-;;;     s->strstart - (IPos)MAX_DIST(s) : NIL;
-
-        mov eax, [edx + dsWSize]
-        sub eax, MIN_LOOKAHEAD
-        sub ebp, eax
-        jg  LimitPositive
-        xor ebp, ebp
-LimitPositive:
-
-;;; int best_len = s->prev_length;
-
-        mov eax, [edx + dsPrevLen]
-        mov [bestlen], eax
-
-;;; Store the sum of s->window + best_len in esi locally, and in esi.
-
-        add esi, eax
-        mov [windowbestlen], esi
-
-;;; register ush scan_start = *(ushf*)scan;
-;;; register ush scan_end   = *(ushf*)(scan+best_len-1);
-;;; Posf *prev = s->prev;
-
-        movzx   ebx, word ptr [edi]
-        mov [scanstart], ebx
-        movzx   ebx, word ptr [edi + eax - 1]
-        mov [scanend], ebx
-        mov edi, [edx + dsPrev]
-
-;;; Jump into the main loop.
-
-        mov edx, [chainlenwmask]
-        jmp short LoopEntry
-
-align 4
-
-;;; do {
-;;;     match = s->window + cur_match;
-;;;     if (*(ushf*)(match+best_len-1) != scan_end ||
-;;;         *(ushf*)match != scan_start) continue;
-;;;     [...]
-;;; } while ((cur_match = prev[cur_match & wmask]) > limit
-;;;          && --chain_length != 0);
-;;;
-;;; Here is the inner loop of the function. The function will spend the
-;;; majority of its time in this loop, and majority of that time will
-;;; be spent in the first ten instructions.
-;;;
-;;; Within this loop:
-;;; ebx = scanend
-;;; ecx = curmatch
-;;; edx = chainlenwmask - i.e., ((chainlen << 16) | wmask)
-;;; esi = windowbestlen - i.e., (window + bestlen)
-;;; edi = prev
-;;; ebp = limit
-
-LookupLoop:
-        and ecx, edx
-        movzx   ecx, word ptr [edi + ecx*2]
-        cmp ecx, ebp
-        jbe LeaveNow
-        sub edx, 00010000h
-        js  LeaveNow
-LoopEntry:  movzx   eax, word ptr [esi + ecx - 1]
-        cmp eax, ebx
-        jnz LookupLoop
-        mov eax, [window]
-        movzx   eax, word ptr [eax + ecx]
-        cmp eax, [scanstart]
-        jnz LookupLoop
-
-;;; Store the current value of chainlen.
-
-        mov [chainlenwmask], edx
-
-;;; Point edi to the string under scrutiny, and esi to the string we
-;;; are hoping to match it up with. In actuality, esi and edi are
-;;; both pointed (MAX_MATCH_8 - scanalign) bytes ahead, and edx is
-;;; initialized to -(MAX_MATCH_8 - scanalign).
-
-        mov esi, [window]
-        mov edi, [scan]
-        add esi, ecx
-        mov eax, [scanalign]
-        mov edx, 0fffffef8h; -(MAX_MATCH_8)
-        lea edi, [edi + eax + 0108h] ;MAX_MATCH_8]
-        lea esi, [esi + eax + 0108h] ;MAX_MATCH_8]
-
-;;; Test the strings for equality, 8 bytes at a time. At the end,
-;;; adjust edx so that it is offset to the exact byte that mismatched.
-;;;
-;;; We already know at this point that the first three bytes of the
-;;; strings match each other, and they can be safely passed over before
-;;; starting the compare loop. So what this code does is skip over 0-3
-;;; bytes, as much as necessary in order to dword-align the edi
-;;; pointer. (esi will still be misaligned three times out of four.)
-;;;
-;;; It should be confessed that this loop usually does not represent
-;;; much of the total running time. Replacing it with a more
-;;; straightforward "rep cmpsb" would not drastically degrade
-;;; performance.
-
-LoopCmps:
-        mov eax, [esi + edx]
-        xor eax, [edi + edx]
-        jnz LeaveLoopCmps
-        mov eax, [esi + edx + 4]
-        xor eax, [edi + edx + 4]
-        jnz LeaveLoopCmps4
-        add edx, 8
-        jnz LoopCmps
-        jmp short LenMaximum
-LeaveLoopCmps4: add edx, 4
-LeaveLoopCmps:  test    eax, 0000FFFFh
-        jnz LenLower
-        add edx,  2
-        shr eax, 16
-LenLower:   sub al, 1
-        adc edx, 0
-
-;;; Calculate the length of the match. If it is longer than MAX_MATCH,
-;;; then automatically accept it as the best possible match and leave.
-
-        lea eax, [edi + edx]
-        mov edi, [scan]
-        sub eax, edi
-        cmp eax, MAX_MATCH
-        jge LenMaximum
-
-;;; If the length of the match is not longer than the best match we
-;;; have so far, then forget it and return to the lookup loop.
-
-        mov edx, [deflatestate]
-        mov ebx, [bestlen]
-        cmp eax, ebx
-        jg  LongerMatch
-        mov esi, [windowbestlen]
-        mov edi, [edx + dsPrev]
-        mov ebx, [scanend]
-        mov edx, [chainlenwmask]
-        jmp LookupLoop
-
-;;;         s->match_start = cur_match;
-;;;         best_len = len;
-;;;         if (len >= nice_match) break;
-;;;         scan_end = *(ushf*)(scan+best_len-1);
-
-LongerMatch:    mov ebx, [nicematch]
-        mov [bestlen], eax
-        mov [edx + dsMatchStart], ecx
-        cmp eax, ebx
-        jge LeaveNow
-        mov esi, [window]
-        add esi, eax
-        mov [windowbestlen], esi
-        movzx   ebx, word ptr [edi + eax - 1]
-        mov edi, [edx + dsPrev]
-        mov [scanend], ebx
-        mov edx, [chainlenwmask]
-        jmp LookupLoop
-
-;;; Accept the current string, with the maximum possible length.
-
-LenMaximum: mov edx, [deflatestate]
-        mov dword ptr [bestlen], MAX_MATCH
-        mov [edx + dsMatchStart], ecx
-
-;;; if ((uInt)best_len <= s->lookahead) return (uInt)best_len;
-;;; return s->lookahead;
-
-LeaveNow:
-        mov edx, [deflatestate]
-        mov ebx, [bestlen]
-        mov eax, [edx + dsLookahead]
-        cmp ebx, eax
-        jg  LookaheadRet
-        mov eax, ebx
-LookaheadRet:
-
-;;; Restore the stack and return from whence we came.
-
-        add esp, LocalVarsSize
-        pop ebx
-        pop esi
-        pop edi
-        pop ebp
-
-        ret
-; please don't remove this string !
-; Your can freely use gvmat32 in any free or commercial app if you don't remove the string in the binary!
-    db     0dh,0ah,"asm686 with masm, optimised assembly code from Brian Raiter, written 1998",0dh,0ah
-
-
-IFDEF NOOLDPENTIUMCODE
-    IFDEF NOUNDERLINE
-    longest_match       endp
-    ELSE
-    _longest_match      endp
-    ENDIF
-
-    IFDEF NOUNDERLINE
-    match_init      proc near
-                    ret
-    match_init      endp
-    ELSE
-    _match_init     proc near
-                    ret
-    _match_init     endp
-    ENDIF    
-ELSE
-    IFDEF NOUNDERLINE
-    longest_match_686   endp
-    ELSE
-    _longest_match_686  endp
-    ENDIF
-ENDIF
-
-_TEXT   ends
-end

contrib/masmx86/gvmat32c.c

@@ -1,62 +0,0 @@
-/* gvmat32.c -- C portion of the optimized longest_match for 32 bits x86
- * Copyright (C) 1995-1996 Jean-loup Gailly and Gilles Vollant.
- * File written by Gilles Vollant, by modifiying the longest_match
- *  from Jean-loup Gailly in deflate.c
- *  it prepare all parameters and call the assembly longest_match_gvasm
- *  longest_match execute standard C code is wmask != 0x7fff
- *     (assembly code is faster with a fixed wmask)
- *
- * Read comment at beginning of gvmat32.asm for more information
- */
-
-#if defined(ASMV) && (!defined(NOOLDPENTIUMCODE))
-#include "deflate.h"
-
-/* if your C compiler don't add underline before function name,
-        define ADD_UNDERLINE_ASMFUNC */
-#ifdef ADD_UNDERLINE_ASMFUNC
-#define longest_match_7fff _longest_match_7fff
-#define longest_match_686  _longest_match_686
-#define cpudetect32        _cpudetect32
-#endif
-
-
-unsigned long cpudetect32();
-
-uInt longest_match_c(
-    deflate_state *s,
-    IPos cur_match);                             /* current match */
-
-
-uInt longest_match_7fff(
-    deflate_state *s,
-    IPos cur_match);                             /* current match */
-
-uInt longest_match_686(
-    deflate_state *s,
-    IPos cur_match);                             /* current match */
-
-
-static uInt iIsPPro=2;
-
-void match_init ()
-{
-    iIsPPro = (((cpudetect32()/0x100)&0xf)>=6) ? 1 : 0;
-}
-
-uInt longest_match(
-    deflate_state *s,
-    IPos cur_match)                             /* current match */
-{
-    if (iIsPPro!=0)
-        return longest_match_686(s,cur_match);
-
-    if (s->w_mask != 0x7fff)
-        return longest_match_686(s,cur_match);
-
-    /* now ((s->w_mask == 0x7fff) && (iIsPPro==0)) */
-        return longest_match_7fff(s,cur_match);
-}
-
-
-#endif /* defined(ASMV) && (!defined(NOOLDPENTIUMCODE)) */

contrib/masmx86/inffas32.asm

@@ -16,7 +16,7 @@
 ; * enabled.  I will attempt to merge the MMX code into this version.  Newer
 ; * versions of this and inffast.S can be found at
 ; * http://www.eetbeetee.com/zlib/ and http://www.charm.net/~christop/zlib/
-; * 
+; *
 ; * 2005 : modification by Gilles Vollant
 ; */
 ; For Visual C++ 4.x and higher and ML 6.x and higher
@@ -33,7 +33,7 @@
 
 
 ; zlib122sup is 0 fort zlib 1.2.2.1 and lower
-; zlib122sup is 8 fort zlib 1.2.2.2 and more (with addition of dmax and head 
+; zlib122sup is 8 fort zlib 1.2.2.2 and more (with addition of dmax and head
 ;        in inflate_state in inflate.h)
 zlib1222sup      equ    8
 
@@ -73,11 +73,6 @@ inflate_fast_use_mmx:
 
 
 _TEXT			segment
-PUBLIC _inflate_fast
-
-ALIGN 4
-_inflate_fast:
-	jmp inflate_fast_entry
 
 
 
@@ -163,7 +158,8 @@ distbits_state	 equ	(76+4+zlib1222sup)	;/* state->distbits */
 ;SECTION .text
 
 ALIGN 4
-inflate_fast_entry:
+_inflate_fast proc near
+.FPO (16, 4, 0, 0, 1, 0)
 	push  edi
 	push  esi
 	push  ebp
@@ -1078,6 +1074,7 @@ L_done:
 	pop  esi
 	pop  edi
 	ret
+_inflate_fast endp
 
 _TEXT	ends
 end

contrib/masmx86/match686.asm

@@ -0,0 +1,479 @@
+; match686.asm -- Asm portion of the optimized longest_match for 32 bits x86
+; Copyright (C) 1995-1996 Jean-loup Gailly, Brian Raiter and Gilles Vollant.
+; File written by Gilles Vollant, by converting match686.S from Brian Raiter
+; for MASM. This is as assembly version of longest_match
+;  from Jean-loup Gailly in deflate.c
+;
+;         http://www.zlib.net
+;         http://www.winimage.com/zLibDll
+;         http://www.muppetlabs.com/~breadbox/software/assembly.html
+;
+; For Visual C++ 4.x and higher and ML 6.x and higher
+;   ml.exe is distributed in
+;  http://www.microsoft.com/downloads/details.aspx?FamilyID=7a1c9da0-0510-44a2-b042-7ef370530c64
+;
+; this file contain two implementation of longest_match
+;
+;  this longest_match was written by Brian raiter (1998), optimized for Pentium Pro
+;   (and the faster known version of match_init on modern Core 2 Duo and AMD Phenom)
+;
+;  for using an assembly version of longest_match, you need define ASMV in project
+;
+;    compile the asm file running
+;           ml /coff /Zi /c /Flmatch686.lst match686.asm
+;    and do not include match686.obj in your project
+;
+; note: contrib of zLib 1.2.3 and earlier contained both a deprecated version for
+;  Pentium (prior Pentium Pro) and this version for Pentium Pro and modern processor
+;  with autoselect (with cpu detection code)
+;  if you want support the old pentium optimization, you can still use these version
+;
+; this file is not optimized for old pentium, but it compatible with all x86 32 bits
+; processor (starting 80386)
+;
+;
+; see below : zlib1222add must be adjuster if you use a zlib version < 1.2.2.2
+
+;uInt longest_match(s, cur_match)
+;    deflate_state *s;
+;    IPos cur_match;                             /* current match */
+
+    NbStack         equ     76
+    cur_match       equ     dword ptr[esp+NbStack-0]
+    str_s           equ     dword ptr[esp+NbStack-4]
+; 5 dword on top (ret,ebp,esi,edi,ebx)
+    adrret          equ     dword ptr[esp+NbStack-8]
+    pushebp         equ     dword ptr[esp+NbStack-12]
+    pushedi         equ     dword ptr[esp+NbStack-16]
+    pushesi         equ     dword ptr[esp+NbStack-20]
+    pushebx         equ     dword ptr[esp+NbStack-24]
+
+    chain_length    equ     dword ptr [esp+NbStack-28]
+    limit           equ     dword ptr [esp+NbStack-32]
+    best_len        equ     dword ptr [esp+NbStack-36]
+    window          equ     dword ptr [esp+NbStack-40]
+    prev            equ     dword ptr [esp+NbStack-44]
+    scan_start      equ      word ptr [esp+NbStack-48]
+    wmask           equ     dword ptr [esp+NbStack-52]
+    match_start_ptr equ     dword ptr [esp+NbStack-56]
+    nice_match      equ     dword ptr [esp+NbStack-60]
+    scan            equ     dword ptr [esp+NbStack-64]
+
+    windowlen       equ     dword ptr [esp+NbStack-68]
+    match_start     equ     dword ptr [esp+NbStack-72]
+    strend          equ     dword ptr [esp+NbStack-76]
+    NbStackAdd      equ     (NbStack-24)
+
+    .386p
+
+    name    gvmatch
+    .MODEL  FLAT
+
+
+
+;  all the +zlib1222add offsets are due to the addition of fields
+;  in zlib in the deflate_state structure since the asm code was first written
+;  (if you compile with zlib 1.0.4 or older, use "zlib1222add equ (-4)").
+;  (if you compile with zlib between 1.0.5 and 1.2.2.1, use "zlib1222add equ 0").
+;  if you compile with zlib 1.2.2.2 or later , use "zlib1222add equ 8").
+
+    zlib1222add         equ     8
+
+;  Note : these value are good with a 8 bytes boundary pack structure
+    dep_chain_length    equ     74h+zlib1222add
+    dep_window          equ     30h+zlib1222add
+    dep_strstart        equ     64h+zlib1222add
+    dep_prev_length     equ     70h+zlib1222add
+    dep_nice_match      equ     88h+zlib1222add
+    dep_w_size          equ     24h+zlib1222add
+    dep_prev            equ     38h+zlib1222add
+    dep_w_mask          equ     2ch+zlib1222add
+    dep_good_match      equ     84h+zlib1222add
+    dep_match_start     equ     68h+zlib1222add
+    dep_lookahead       equ     6ch+zlib1222add
+
+
+_TEXT                   segment
+
+IFDEF NOUNDERLINE
+            public  longest_match
+            public  match_init
+ELSE
+            public  _longest_match
+            public  _match_init
+ENDIF
+
+    MAX_MATCH           equ     258
+    MIN_MATCH           equ     3
+    MIN_LOOKAHEAD       equ     (MAX_MATCH+MIN_MATCH+1)
+
+
+
+MAX_MATCH       equ     258
+MIN_MATCH       equ     3
+MIN_LOOKAHEAD   equ     (MAX_MATCH + MIN_MATCH + 1)
+MAX_MATCH_8_     equ     ((MAX_MATCH + 7) AND 0FFF0h)
+
+
+;;; stack frame offsets
+
+chainlenwmask   equ  esp + 0    ; high word: current chain len
+                    ; low word: s->wmask
+window      equ  esp + 4    ; local copy of s->window
+windowbestlen   equ  esp + 8    ; s->window + bestlen
+scanstart   equ  esp + 16   ; first two bytes of string
+scanend     equ  esp + 12   ; last two bytes of string
+scanalign   equ  esp + 20   ; dword-misalignment of string
+nicematch   equ  esp + 24   ; a good enough match size
+bestlen     equ  esp + 28   ; size of best match so far
+scan        equ  esp + 32   ; ptr to string wanting match
+
+LocalVarsSize   equ 36
+;   saved ebx   byte esp + 36
+;   saved edi   byte esp + 40
+;   saved esi   byte esp + 44
+;   saved ebp   byte esp + 48
+;   return address  byte esp + 52
+deflatestate    equ  esp + 56   ; the function arguments
+curmatch    equ  esp + 60
+
+;;; Offsets for fields in the deflate_state structure. These numbers
+;;; are calculated from the definition of deflate_state, with the
+;;; assumption that the compiler will dword-align the fields. (Thus,
+;;; changing the definition of deflate_state could easily cause this
+;;; program to crash horribly, without so much as a warning at
+;;; compile time. Sigh.)
+
+dsWSize     equ 36+zlib1222add
+dsWMask     equ 44+zlib1222add
+dsWindow    equ 48+zlib1222add
+dsPrev      equ 56+zlib1222add
+dsMatchLen  equ 88+zlib1222add
+dsPrevMatch equ 92+zlib1222add
+dsStrStart  equ 100+zlib1222add
+dsMatchStart    equ 104+zlib1222add
+dsLookahead equ 108+zlib1222add
+dsPrevLen   equ 112+zlib1222add
+dsMaxChainLen   equ 116+zlib1222add
+dsGoodMatch equ 132+zlib1222add
+dsNiceMatch equ 136+zlib1222add
+
+
+;;; match686.asm -- Pentium-Pro-optimized version of longest_match()
+;;; Written for zlib 1.1.2
+;;; Copyright (C) 1998 Brian Raiter <breadbox@muppetlabs.com>
+;;; You can look at http://www.muppetlabs.com/~breadbox/software/assembly.html
+;;;
+;;
+;;  This software is provided 'as-is', without any express or implied
+;;  warranty.  In no event will the authors be held liable for any damages
+;;  arising from the use of this software.
+;;
+;;  Permission is granted to anyone to use this software for any purpose,
+;;  including commercial applications, and to alter it and redistribute it
+;;  freely, subject to the following restrictions:
+;;
+;;  1. The origin of this software must not be misrepresented; you must not
+;;     claim that you wrote the original software. If you use this software
+;;     in a product, an acknowledgment in the product documentation would be
+;;     appreciated but is not required.
+;;  2. Altered source versions must be plainly marked as such, and must not be
+;;     misrepresented as being the original software
+;;  3. This notice may not be removed or altered from any source distribution.
+;;
+
+;GLOBAL _longest_match, _match_init
+
+
+;SECTION    .text
+
+;;; uInt longest_match(deflate_state *deflatestate, IPos curmatch)
+
+;_longest_match:
+    IFDEF NOUNDERLINE
+    longest_match       proc near
+    ELSE
+    _longest_match      proc near
+    ENDIF
+.FPO (9, 4, 0, 0, 1, 0)
+
+;;; Save registers that the compiler may be using, and adjust esp to
+;;; make room for our stack frame.
+
+        push    ebp
+        push    edi
+        push    esi
+        push    ebx
+        sub esp, LocalVarsSize
+
+;;; Retrieve the function arguments. ecx will hold cur_match
+;;; throughout the entire function. edx will hold the pointer to the
+;;; deflate_state structure during the function's setup (before
+;;; entering the main loop.
+
+        mov edx, [deflatestate]
+        mov ecx, [curmatch]
+
+;;; uInt wmask = s->w_mask;
+;;; unsigned chain_length = s->max_chain_length;
+;;; if (s->prev_length >= s->good_match) {
+;;;     chain_length >>= 2;
+;;; }
+
+        mov eax, [edx + dsPrevLen]
+        mov ebx, [edx + dsGoodMatch]
+        cmp eax, ebx
+        mov eax, [edx + dsWMask]
+        mov ebx, [edx + dsMaxChainLen]
+        jl  LastMatchGood
+        shr ebx, 2
+LastMatchGood:
+
+;;; chainlen is decremented once beforehand so that the function can
+;;; use the sign flag instead of the zero flag for the exit test.
+;;; It is then shifted into the high word, to make room for the wmask
+;;; value, which it will always accompany.
+
+        dec ebx
+        shl ebx, 16
+        or  ebx, eax
+        mov [chainlenwmask], ebx
+
+;;; if ((uInt)nice_match > s->lookahead) nice_match = s->lookahead;
+
+        mov eax, [edx + dsNiceMatch]
+        mov ebx, [edx + dsLookahead]
+        cmp ebx, eax
+        jl  LookaheadLess
+        mov ebx, eax
+LookaheadLess:  mov [nicematch], ebx
+
+;;; register Bytef *scan = s->window + s->strstart;
+
+        mov esi, [edx + dsWindow]
+        mov [window], esi
+        mov ebp, [edx + dsStrStart]
+        lea edi, [esi + ebp]
+        mov [scan], edi
+
+;;; Determine how many bytes the scan ptr is off from being
+;;; dword-aligned.
+
+        mov eax, edi
+        neg eax
+        and eax, 3
+        mov [scanalign], eax
+
+;;; IPos limit = s->strstart > (IPos)MAX_DIST(s) ?
+;;;     s->strstart - (IPos)MAX_DIST(s) : NIL;
+
+        mov eax, [edx + dsWSize]
+        sub eax, MIN_LOOKAHEAD
+        sub ebp, eax
+        jg  LimitPositive
+        xor ebp, ebp
+LimitPositive:
+
+;;; int best_len = s->prev_length;
+
+        mov eax, [edx + dsPrevLen]
+        mov [bestlen], eax
+
+;;; Store the sum of s->window + best_len in esi locally, and in esi.
+
+        add esi, eax
+        mov [windowbestlen], esi
+
+;;; register ush scan_start = *(ushf*)scan;
+;;; register ush scan_end   = *(ushf*)(scan+best_len-1);
+;;; Posf *prev = s->prev;
+
+        movzx   ebx, word ptr [edi]
+        mov [scanstart], ebx
+        movzx   ebx, word ptr [edi + eax - 1]
+        mov [scanend], ebx
+        mov edi, [edx + dsPrev]
+
+;;; Jump into the main loop.
+
+        mov edx, [chainlenwmask]
+        jmp short LoopEntry
+
+align 4
+
+;;; do {
+;;;     match = s->window + cur_match;
+;;;     if (*(ushf*)(match+best_len-1) != scan_end ||
+;;;         *(ushf*)match != scan_start) continue;
+;;;     [...]
+;;; } while ((cur_match = prev[cur_match & wmask]) > limit
+;;;          && --chain_length != 0);
+;;;
+;;; Here is the inner loop of the function. The function will spend the
+;;; majority of its time in this loop, and majority of that time will
+;;; be spent in the first ten instructions.
+;;;
+;;; Within this loop:
+;;; ebx = scanend
+;;; ecx = curmatch
+;;; edx = chainlenwmask - i.e., ((chainlen << 16) | wmask)
+;;; esi = windowbestlen - i.e., (window + bestlen)
+;;; edi = prev
+;;; ebp = limit
+
+LookupLoop:
+        and ecx, edx
+        movzx   ecx, word ptr [edi + ecx*2]
+        cmp ecx, ebp
+        jbe LeaveNow
+        sub edx, 00010000h
+        js  LeaveNow
+LoopEntry:  movzx   eax, word ptr [esi + ecx - 1]
+        cmp eax, ebx
+        jnz LookupLoop
+        mov eax, [window]
+        movzx   eax, word ptr [eax + ecx]
+        cmp eax, [scanstart]
+        jnz LookupLoop
+
+;;; Store the current value of chainlen.
+
+        mov [chainlenwmask], edx
+
+;;; Point edi to the string under scrutiny, and esi to the string we
+;;; are hoping to match it up with. In actuality, esi and edi are
+;;; both pointed (MAX_MATCH_8 - scanalign) bytes ahead, and edx is
+;;; initialized to -(MAX_MATCH_8 - scanalign).
+
+        mov esi, [window]
+        mov edi, [scan]
+        add esi, ecx
+        mov eax, [scanalign]
+        mov edx, 0fffffef8h; -(MAX_MATCH_8)
+        lea edi, [edi + eax + 0108h] ;MAX_MATCH_8]
+        lea esi, [esi + eax + 0108h] ;MAX_MATCH_8]
+
+;;; Test the strings for equality, 8 bytes at a time. At the end,
+;;; adjust edx so that it is offset to the exact byte that mismatched.
+;;;
+;;; We already know at this point that the first three bytes of the
+;;; strings match each other, and they can be safely passed over before
+;;; starting the compare loop. So what this code does is skip over 0-3
+;;; bytes, as much as necessary in order to dword-align the edi
+;;; pointer. (esi will still be misaligned three times out of four.)
+;;;
+;;; It should be confessed that this loop usually does not represent
+;;; much of the total running time. Replacing it with a more
+;;; straightforward "rep cmpsb" would not drastically degrade
+;;; performance.
+
+LoopCmps:
+        mov eax, [esi + edx]
+        xor eax, [edi + edx]
+        jnz LeaveLoopCmps
+        mov eax, [esi + edx + 4]
+        xor eax, [edi + edx + 4]
+        jnz LeaveLoopCmps4
+        add edx, 8
+        jnz LoopCmps
+        jmp short LenMaximum
+LeaveLoopCmps4: add edx, 4
+LeaveLoopCmps:  test    eax, 0000FFFFh
+        jnz LenLower
+        add edx,  2
+        shr eax, 16
+LenLower:   sub al, 1
+        adc edx, 0
+
+;;; Calculate the length of the match. If it is longer than MAX_MATCH,
+;;; then automatically accept it as the best possible match and leave.
+
+        lea eax, [edi + edx]
+        mov edi, [scan]
+        sub eax, edi
+        cmp eax, MAX_MATCH
+        jge LenMaximum
+
+;;; If the length of the match is not longer than the best match we
+;;; have so far, then forget it and return to the lookup loop.
+
+        mov edx, [deflatestate]
+        mov ebx, [bestlen]
+        cmp eax, ebx
+        jg  LongerMatch
+        mov esi, [windowbestlen]
+        mov edi, [edx + dsPrev]
+        mov ebx, [scanend]
+        mov edx, [chainlenwmask]
+        jmp LookupLoop
+
+;;;         s->match_start = cur_match;
+;;;         best_len = len;
+;;;         if (len >= nice_match) break;
+;;;         scan_end = *(ushf*)(scan+best_len-1);
+
+LongerMatch:    mov ebx, [nicematch]
+        mov [bestlen], eax
+        mov [edx + dsMatchStart], ecx
+        cmp eax, ebx
+        jge LeaveNow
+        mov esi, [window]
+        add esi, eax
+        mov [windowbestlen], esi
+        movzx   ebx, word ptr [edi + eax - 1]
+        mov edi, [edx + dsPrev]
+        mov [scanend], ebx
+        mov edx, [chainlenwmask]
+        jmp LookupLoop
+
+;;; Accept the current string, with the maximum possible length.
+
+LenMaximum: mov edx, [deflatestate]
+        mov dword ptr [bestlen], MAX_MATCH
+        mov [edx + dsMatchStart], ecx
+
+;;; if ((uInt)best_len <= s->lookahead) return (uInt)best_len;
+;;; return s->lookahead;
+
+LeaveNow:
+        mov edx, [deflatestate]
+        mov ebx, [bestlen]
+        mov eax, [edx + dsLookahead]
+        cmp ebx, eax
+        jg  LookaheadRet
+        mov eax, ebx
+LookaheadRet:
+
+;;; Restore the stack and return from whence we came.
+
+        add esp, LocalVarsSize
+        pop ebx
+        pop esi
+        pop edi
+        pop ebp
+
+        ret
+; please don't remove this string !
+; Your can freely use match686 in any free or commercial app if you don't remove the string in the binary!
+    db     0dh,0ah,"asm686 with masm, optimised assembly code from Brian Raiter, written 1998",0dh,0ah
+
+
+    IFDEF NOUNDERLINE
+    longest_match       endp
+    ELSE
+    _longest_match      endp
+    ENDIF
+
+    IFDEF NOUNDERLINE
+    match_init      proc near
+                    ret
+    match_init      endp
+    ELSE
+    _match_init     proc near
+                    ret
+    _match_init     endp
+    ENDIF
+
+
+_TEXT   ends
+end

contrib/masmx86/mkasm.bat

@@ -1,3 +0,0 @@
-cl /DASMV /I..\.. /O2 /c gvmat32c.c
-ml /coff /Zi /c /Flgvmat32.lst gvmat32.asm
-ml /coff /Zi /c /Flinffas32.lst inffas32.asm

contrib/masmx86/readme.txt

@@ -1,21 +1,27 @@
-
+
-Summary
+Summary
--------
+-------
-This directory contains ASM implementations of the functions
+This directory contains ASM implementations of the functions
-longest_match() and inflate_fast().
+longest_match() and inflate_fast().
-
+
-
+
-Use instructions
+Use instructions
-----------------
+----------------
-Copy these files into the zlib source directory, then run the
+Assemble using MASM, and copy the object files into the zlib source
-appropriate makefile, as suggested below.
+directory, then run the appropriate makefile, as suggested below.  You can
-
+donwload MASM from here:
-
+
-Build instructions
+    http://www.microsoft.com/downloads/details.aspx?displaylang=en&FamilyID=7a1c9da0-0510-44a2-b042-7ef370530c64
-------------------
+
-* With Microsoft C and MASM:
+You can also get objects files here:
-nmake -f win32/Makefile.msc LOC="-DASMV -DASMINF" OBJA="gvmat32c.obj gvmat32.obj inffas32.obj"
+
-
+    http://www.winimage.com/zLibDll/zlib124_masm_obj.zip
-* With Borland C and TASM:
+
-make -f win32/Makefile.bor LOCAL_ZLIB="-DASMV -DASMINF" OBJA="gvmat32c.obj gvmat32.obj inffas32.obj" OBJPA="+gvmat32c.obj+gvmat32.obj+inffas32.obj"
+Build instructions
-
+------------------
+* With Microsoft C and MASM:
+nmake -f win32/Makefile.msc LOC="-DASMV -DASMINF" OBJA="match686.obj inffas32.obj"
+
+* With Borland C and TASM:
+make -f win32/Makefile.bor LOCAL_ZLIB="-DASMV -DASMINF" OBJA="match686.obj inffas32.obj" OBJPA="+match686c.obj+match686.obj+inffas32.obj"
+

contrib/minizip/Makefile

@@ -1,25 +1,25 @@
-CC=cc
+CC=cc
-CFLAGS=-O -I../..
+CFLAGS=-O -I../..
-
+
-UNZ_OBJS = miniunz.o unzip.o ioapi.o ../../libz.a
+UNZ_OBJS = miniunz.o unzip.o ioapi.o ../../libz.a
-ZIP_OBJS = minizip.o zip.o   ioapi.o ../../libz.a
+ZIP_OBJS = minizip.o zip.o   ioapi.o ../../libz.a
-
+
-.c.o:
+.c.o:
-	$(CC) -c $(CFLAGS) $*.c
+	$(CC) -c $(CFLAGS) $*.c
-
+
-all: miniunz minizip
+all: miniunz minizip
-
+
-miniunz:  $(UNZ_OBJS)
+miniunz:  $(UNZ_OBJS)
-	$(CC) $(CFLAGS) -o $@ $(UNZ_OBJS)
+	$(CC) $(CFLAGS) -o $@ $(UNZ_OBJS)
-
+
-minizip:  $(ZIP_OBJS)
+minizip:  $(ZIP_OBJS)
-	$(CC) $(CFLAGS) -o $@ $(ZIP_OBJS)
+	$(CC) $(CFLAGS) -o $@ $(ZIP_OBJS)
-
+
-test:	miniunz minizip
+test:	miniunz minizip
-	./minizip test readme.txt
+	./minizip test readme.txt
-	./miniunz -l test.zip
+	./miniunz -l test.zip
-	mv readme.txt readme.old
+	mv readme.txt readme.old
-	./miniunz test.zip
+	./miniunz test.zip
-
+
-clean:
+clean:
-	/bin/rm -f *.o *~ minizip miniunz
+	/bin/rm -f *.o *~ minizip miniunz

contrib/minizip/MiniZip64_Changes.txt

@@ -1,7 +1,6 @@
-
+
-MiniZip64 was derrived from MiniZip at version 1.01f
+MiniZip 1.1 was derrived from MiniZip at version 1.01f
-
+
-Change in 1.0 (Okt 2009)
+Change in 1.0 (Okt 2009)
- - **TODO - Add history**
+ - **TODO - Add history**
- 
+
- 

contrib/minizip/MiniZip64_info.txt

@@ -1,79 +1,74 @@
-MiniZip64 - Copyright (c) 2009-2010 - Mathias Svensson - Built from MiniZip by Gilles Vollant
+MiniZip - Copyright (c) 1998-2010 - by Gilles Vollant - version 1.1 64 bits from Mathias Svensson
-
+
-Introduction
+Introduction
----------------------
+---------------------
-MiniZip64 is built from MiniZip by Gilles Vollant ( http://www.winimage.com/zLibDll/minizip.html )
+MiniZip 1.1 is built from MiniZip 1.0 by Gilles Vollant ( http://www.winimage.com/zLibDll/minizip.html )
-
+
-When adding ZIP64 support into minizip it would result into breaking compatibility with current minizip.
+When adding ZIP64 support into minizip it would result into risk of breaking compatibility with minizip 1.0.
-And since breaking compatibility in minizip is not wanted. I decided to create a fork of minizip 
+All possible work was done for compatibility.
-and create minizip64.
+
-
+
-Even though MiniZip64 is build from MiniZip, all functions and struct's have changed name so that it 
+Background
-would not collide with each other.
+---------------------
-
+When adding ZIP64 support Mathias Svensson found that Even Rouault have added ZIP64 
-
+support for unzip.c into minizip for a open source project called gdal ( http://www.gdal.org/ )
-Background
+
----------------------
+That was used as a starting point. And after that ZIP64 support was added to zip.c
-When adding ZIP64 support I found that Even Rouault have added ZIP64 support for unzip.c into minizip 
+some refactoring and code cleanup was also done.
-for a open source project called gdal ( http://www.gdal.org/ )
+
-
+
-That was used as a starting point. And after that ZIP64 support was added to zip.c
+Changed from MiniZip 1.0 to MiniZip 1.1
-some refactoring and code cleanup was also done.
+---------------------------------------
-
+* Added ZIP64 support for unzip ( by Even Rouault )
-
+* Added ZIP64 support for zip ( by Mathias Svensson )
-Changed from MiniZip to MiniZip64
+* Reverted some changed that Even Rouault did.
--------------------------------------
+* Bunch of patches received from Gulles Vollant that he received for MiniZip from various users.
-* Filenames has got a '64' at the end of them . eg unzip.c is now called unzip64.c
+* Added unzip patch for BZIP Compression method (patch create by Daniel Borca)
-* Added ZIP64 support for unzip ( by Even Rouault )
+* Added BZIP Compress method for zip
-* Added ZIP64 support for zip ( by Mathias Svensson )
+* Did some refactoring and code cleanup
-* Reverted some changed that Even Rouault did.
+
-* Bunch of patches received from Gulles Vollant that he received for MiniZip from various users.
+
-* Added unzip patch for BZIP Compression method (patch create by Daniel Borca)
+Credits
-* Added BZIP Compress method for zip
+
-* Did some refactoring and code cleanup
+ Gilles Vollant    - Original MiniZip author
-
+ Even Rouault      - ZIP64 unzip Support
-
+ Daniel Borca      - BZip Compression method support in unzip
-Credits 
+ Mathias Svensson  - ZIP64 zip support
-
+ Mathias Svensson  - BZip Compression method support in zip
- Gilles Vollant    - Original MiniZip author
+
- Even Rouault      - ZIP64 unzip Support
+ Resources
- Daniel Borca      - BZip Compression method support in unzip
+
- Mathias Svensson  - ZIP64 zip support
+ ZipLayout   http://result42.com/projects/ZipFileLayout
- Mathias Svensson  - BZip Compression method support in zip
+             Command line tool for Windows that shows the layout and information of the headers in a zip archive.
- 
+             Used when debugging and validating the creation of zip files using MiniZip64
- Resources 
+
- 
+
- ZipLayout   http://result42.com/projects/ZipFileLayout
+ ZIP App Note  http://www.pkware.com/documents/casestudies/APPNOTE.TXT
-             Command line tool for Windows that shows the layout and information of the headers in a zip archive.
+               Zip File specification
-             Used when debugging and validating the creation of zip files using MiniZip64
+
-			 
+
-			 
+Notes.
- ZIP App Note  http://www.pkware.com/documents/casestudies/APPNOTE.TXT
+ * To be able to use BZip compression method in zip64.c or unzip64.c the BZIP2 lib is needed and HAVE_BZIP2 need to be defined.
-               Zip File specification
+
-        
+License
-
+----------------------------------------------------------
-Notes.
+   Condition of use and distribution are the same than zlib :
- * To be able to use BZip compression method in zip64.c or unzip64.c the BZIP2 lib is needed and HAVE_BZIP2 need to be defined.
+
-
+  This software is provided 'as-is', without any express or implied
-License
+  warranty.  In no event will the authors be held liable for any damages
-----------------------------------------------------------
+  arising from the use of this software.
-   Condition of use and distribution are the same than zlib :
+
-
+  Permission is granted to anyone to use this software for any purpose,
-  This software is provided 'as-is', without any express or implied
+  including commercial applications, and to alter it and redistribute it
-  warranty.  In no event will the authors be held liable for any damages
+  freely, subject to the following restrictions:
-  arising from the use of this software.
+
-
+  1. The origin of this software must not be misrepresented; you must not
-  Permission is granted to anyone to use this software for any purpose,
+     claim that you wrote the original software. If you use this software
-  including commercial applications, and to alter it and redistribute it
+     in a product, an acknowledgment in the product documentation would be
-  freely, subject to the following restrictions:
+     appreciated but is not required.
-
+  2. Altered source versions must be plainly marked as such, and must not be
-  1. The origin of this software must not be misrepresented; you must not
+     misrepresented as being the original software.
-     claim that you wrote the original software. If you use this software
+  3. This notice may not be removed or altered from any source distribution.
-     in a product, an acknowledgment in the product documentation would be
+
-     appreciated but is not required.
+----------------------------------------------------------
-  2. Altered source versions must be plainly marked as such, and must not be
+
-     misrepresented as being the original software.
-  3. This notice may not be removed or altered from any source distribution.
-
-----------------------------------------------------------
-

contrib/minizip/crypt.h

@@ -91,7 +91,7 @@ static int crypthead(const char* passwd,      /* password string */
                      unsigned char* buf,      /* where to write header */
                      int bufSize,
                      unsigned long* pkeys,
-                     const unsigned long* pcrc_32_tab, 
+                     const unsigned long* pcrc_32_tab,
                      unsigned long crcForCrypting)
 {
     int n;                       /* index in random header */

contrib/minizip/ioapi.c

@@ -1,19 +1,31 @@
 /* ioapi.h -- IO base function header for compress/uncompress .zip
    part of the MiniZip project - ( http://www.winimage.com/zLibDll/minizip.html )
 
-	 Copyright (C) 1998-2010 Gilles Vollant (minizip) ( http://www.winimage.com/zLibDll/minizip.html )
+         Copyright (C) 1998-2010 Gilles Vollant (minizip) ( http://www.winimage.com/zLibDll/minizip.html )
 
-	 Modifications for Zip64 support 
+         Modifications for Zip64 support
-	 Copyright (C) 2009-2010 Mathias Svensson ( http://result42.com )
+         Copyright (C) 2009-2010 Mathias Svensson ( http://result42.com )
 
-	 For more info read MiniZip_info.txt
+         For more info read MiniZip_info.txt
 
 */
 
 #if (defined(_WIN32))
-	#define _CRT_SECURE_NO_WARNINGS
+        #define _CRT_SECURE_NO_WARNINGS
 #endif
 
+#ifdef __APPLE__
+// In darwin and perhaps other BSD variants off_t is a 64 bit value, hence no need for specific 64 bit functions
+#define FOPEN_FUNC(filename, mode) fopen(filename, mode)
+#define FTELLO_FUNC(stream) ftello(stream)
+#define FSEEKO_FUNC(stream, offset, origin) fseeko(stream, offset, origin)
+#else
+#define FOPEN_FUNC(filename, mode) fopen64(filename, mode)
+#define FTELLO_FUNC(stream) ftello64(stream)
+#define FSEEKO_FUNC(stream, offset, origin) fseeko64(stream, offset, origin)
+#endif
+
+
 #include "ioapi.h"
 
 voidpf call_zopen64 (const zlib_filefunc64_32_def* pfilefunc,const void*filename,int mode)
@@ -112,7 +124,7 @@ static voidpf ZCALLBACK fopen64_file_func (voidpf opaque, const void* filename,
         mode_fopen = "wb";
 
     if ((filename!=NULL) && (mode_fopen != NULL))
-        file = fopen64((const char*)filename, mode_fopen);
+        file = FOPEN_FUNC((const char*)filename, mode_fopen);
     return file;
 }
 
@@ -142,7 +154,7 @@ static long ZCALLBACK ftell_file_func (voidpf opaque, voidpf stream)
 static ZPOS64_T ZCALLBACK ftell64_file_func (voidpf opaque, voidpf stream)
 {
     ZPOS64_T ret;
-    ret = ftello64((FILE *)stream);
+    ret = FTELLO_FUNC((FILE *)stream);
     return ret;
 }
 
@@ -188,8 +200,8 @@ static long ZCALLBACK fseek64_file_func (voidpf  opaque, voidpf stream, ZPOS64_T
     }
     ret = 0;
 
-    if(fseeko64((FILE *)stream, offset, fseek_origin) != 0)
+    if(FSEEKO_FUNC((FILE *)stream, offset, fseek_origin) != 0)
-			ret = -1;
+                        ret = -1;
 
     return ret;
 }

contrib/minizip/ioapi.h

@@ -1,52 +1,58 @@
 /* ioapi.h -- IO base function header for compress/uncompress .zip
    part of the MiniZip project - ( http://www.winimage.com/zLibDll/minizip.html )
 
-	 Copyright (C) 1998-2010 Gilles Vollant (minizip) ( http://www.winimage.com/zLibDll/minizip.html )
+         Copyright (C) 1998-2010 Gilles Vollant (minizip) ( http://www.winimage.com/zLibDll/minizip.html )
 
-	 Modifications for Zip64 support 
+         Modifications for Zip64 support
-	 Copyright (C) 2009-2010 Mathias Svensson ( http://result42.com )
+         Copyright (C) 2009-2010 Mathias Svensson ( http://result42.com )
 
-	 For more info read MiniZip_info.txt
+         For more info read MiniZip_info.txt
 
-	 Changes
+         Changes
 
     Oct-2009 - Defined ZPOS64_T to fpos_t on windows and u_int64_t on linux. (might need to find a better why for this)
     Oct-2009 - Change to fseeko64, ftello64 and fopen64 so large files would work on linux.
                More if/def section may be needed to support other platforms
-    Oct-2009 - Defined fxxxx64 calls to normal fopen/ftell/fseek so they would compile on windows. 
+    Oct-2009 - Defined fxxxx64 calls to normal fopen/ftell/fseek so they would compile on windows.
-		          (but you should use iowin32.c for windows instead)
+                          (but you should use iowin32.c for windows instead)
 
 */
 
 #ifndef _ZLIBIOAPI64_H
 #define _ZLIBIOAPI64_H
 
-#ifndef _WIN32 
+#if (!defined(_WIN32)) && (!defined(WIN32)) && (!defined(__APPLE__))
 
   // Linux needs this to support file operation on files larger then 4+GB
   // But might need better if/def to select just the platforms that needs them.
 
-	#ifndef __USE_FILE_OFFSET64
+        #ifndef __USE_FILE_OFFSET64
-		#define __USE_FILE_OFFSET64
+                #define __USE_FILE_OFFSET64
-	#endif
+        #endif
-	#ifndef __USE_LARGEFILE64
+        #ifndef __USE_LARGEFILE64
-		#define __USE_LARGEFILE64
+                #define __USE_LARGEFILE64
-	#endif
+        #endif
-	#ifndef _LARGEFILE64_SOURCE
+        #ifndef _LARGEFILE64_SOURCE
-		#define _LARGEFILE64_SOURCE
+                #define _LARGEFILE64_SOURCE
-	#endif
+        #endif
-	#ifndef _FILE_OFFSET_BIT
+        #ifndef _FILE_OFFSET_BIT
-		#define _FILE_OFFSET_BIT 64
+                #define _FILE_OFFSET_BIT 64
-	#endif
+        #endif
+
 #endif
 
 #include <stdio.h>
 #include <stdlib.h>
 #include "zlib.h"
 
+#if defined(USE_FILE32API)
+#define fopen64 fopen
+#define ftello64 ftell
+#define fseeko64 fseek
+#else
 #ifdef _MSC_VER
  #define fopen64 fopen
- #if _MSC_VER >= 1400
+ #if (_MSC_VER >= 1400) && (!(defined(NO_MSCVER_FILE64_FUNC)))
   #define ftello64 _ftelli64
   #define fseeko64 _fseeki64
  #else // old MSC
@@ -54,13 +60,14 @@
   #define fseeko64 fseek
  #endif
 #endif
+#endif
 
 /*
 #ifndef ZPOS64_T
   #ifdef _WIN32
-		#define ZPOS64_T fpos_t
+                #define ZPOS64_T fpos_t
   #else
-    #include <stdint.h>       	
+    #include <stdint.h>
     #define ZPOS64_T uint64_t
   #endif
 #endif

contrib/minizip/iowin32.c

@@ -1,11 +1,11 @@
 /* iowin32.c -- IO base function header for compress/uncompress .zip
-     Version 1.1, January 7th, 2010
+     Version 1.1, February 14h, 2010
      part of the MiniZip project - ( http://www.winimage.com/zLibDll/minizip.html )
 
-	 Copyright (C) 1998-2010 Gilles Vollant (minizip) ( http://www.winimage.com/zLibDll/minizip.html )
+         Copyright (C) 1998-2010 Gilles Vollant (minizip) ( http://www.winimage.com/zLibDll/minizip.html )
 
-	 Modifications for Zip64 support 
+         Modifications for Zip64 support
-	 Copyright (C) 2009-2010 Mathias Svensson ( http://result42.com )
+         Copyright (C) 2009-2010 Mathias Svensson ( http://result42.com )
 
      For more info read MiniZip_info.txt
 

contrib/minizip/iowin32.h

@@ -1,13 +1,13 @@
 /* iowin32.h -- IO base function header for compress/uncompress .zip
-     Version 1.1, January 7th, 2010
+     Version 1.1, February 14h, 2010
      part of the MiniZip project - ( http://www.winimage.com/zLibDll/minizip.html )
 
-	 Copyright (C) 1998-2010 Gilles Vollant (minizip) ( http://www.winimage.com/zLibDll/minizip.html )
+         Copyright (C) 1998-2010 Gilles Vollant (minizip) ( http://www.winimage.com/zLibDll/minizip.html )
 
-	 Modifications for Zip64 support 
+         Modifications for Zip64 support
-	 Copyright (C) 2009-2010 Mathias Svensson ( http://result42.com )
+         Copyright (C) 2009-2010 Mathias Svensson ( http://result42.com )
 
-	 For more info read MiniZip_info.txt
+         For more info read MiniZip_info.txt
 
 */
 

contrib/minizip/make_vms.com

@@ -12,14 +12,14 @@ $ close zdef
 $ copy vmsdefs.h,ioapi.h_orig ioapi.h
 $ cc/include=[--]/prefix=all ioapi.c
 $ cc/include=[--]/prefix=all miniunz.c
-$ cc/include=[--]/prefix=all unzip.c 
+$ cc/include=[--]/prefix=all unzip.c
 $ cc/include=[--]/prefix=all minizip.c
 $ cc/include=[--]/prefix=all zip.c
 $ link miniunz,unzip,ioapi,[--]libz.olb/lib
 $ link minizip,zip,ioapi,[--]libz.olb/lib
-$ mcr []minizip test minizip64_info.txt
+$ mcr []minizip test minizip_info.txt
 $ mcr []miniunz -l test.zip
-$ rename minizip64_info.txt; minizip64_info.txt_old
+$ rename minizip_info.txt; minizip_info.txt_old
 $ mcr []miniunz test.zip
 $ delete test.zip;*
 $exit

contrib/minizip/miniunz.c

@@ -1,32 +1,44 @@
 /*
    miniunz.c
-   Version 1.1, January 7th, 2010
+   Version 1.1, February 14h, 2010
    sample part of the MiniZip project - ( http://www.winimage.com/zLibDll/minizip.html )
 
-	 Copyright (C) 1998-2010 Gilles Vollant (minizip) ( http://www.winimage.com/zLibDll/minizip.html )
+         Copyright (C) 1998-2010 Gilles Vollant (minizip) ( http://www.winimage.com/zLibDll/minizip.html )
 
-	 Modifications of Unzip for Zip64
+         Modifications of Unzip for Zip64
-	 Copyright (C) 2007-2008 Even Rouault
+         Copyright (C) 2007-2008 Even Rouault
 
-	 Modifications for Zip64 support on both zip and unzip
+         Modifications for Zip64 support on both zip and unzip
-	 Copyright (C) 2009-2010 Mathias Svensson ( http://result42.com )
+         Copyright (C) 2009-2010 Mathias Svensson ( http://result42.com )
 */
 
-#ifndef _WIN32 
+#if (!defined(_WIN32)) && (!defined(WIN32)) && (!defined(__APPLE__))
-	#ifndef __USE_FILE_OFFSET64
+        #ifndef __USE_FILE_OFFSET64
-		#define __USE_FILE_OFFSET64
+                #define __USE_FILE_OFFSET64
-	#endif
+        #endif
-	#ifndef __USE_LARGEFILE64
+        #ifndef __USE_LARGEFILE64
-		#define __USE_LARGEFILE64
+                #define __USE_LARGEFILE64
-	#endif
+        #endif
-	#ifndef _LARGEFILE64_SOURCE
+        #ifndef _LARGEFILE64_SOURCE
-		#define _LARGEFILE64_SOURCE
+                #define _LARGEFILE64_SOURCE
-	#endif
+        #endif
-	#ifndef _FILE_OFFSET_BIT
+        #ifndef _FILE_OFFSET_BIT
-		#define _FILE_OFFSET_BIT 64
+                #define _FILE_OFFSET_BIT 64
-	#endif
+        #endif
 #endif
 
+#ifdef __APPLE__
+// In darwin and perhaps other BSD variants off_t is a 64 bit value, hence no need for specific 64 bit functions
+#define FOPEN_FUNC(filename, mode) fopen(filename, mode)
+#define FTELLO_FUNC(stream) ftello(stream)
+#define FSEEKO_FUNC(stream, offset, origin) fseeko(stream, offset, origin)
+#else
+#define FOPEN_FUNC(filename, mode) fopen64(filename, mode)
+#define FTELLO_FUNC(stream) ftello64(stream)
+#define FSEEKO_FUNC(stream, offset, origin) fseeko64(stream, offset, origin)
+#endif
+
+
 #include <stdio.h>
 #include <stdlib.h>
 #include <string.h>
@@ -34,14 +46,15 @@
 #include <errno.h>
 #include <fcntl.h>
 
-#ifdef unix
+#ifdef _WIN32
-# include <unistd.h>
-# include <utime.h>
-#else
 # include <direct.h>
 # include <io.h>
+#else
+# include <unistd.h>
+# include <utime.h>
 #endif
 
+
 #include "unzip.h"
 
 #define CASESENSITIVITY (0)
@@ -84,7 +97,7 @@ void change_file_date(filename,dosdate,tmu_date)
   SetFileTime(hFile,&ftm,&ftLastAcc,&ftm);
   CloseHandle(hFile);
 #else
-#ifdef unix
+#ifdef unix || __APPLE__
   struct utimbuf ut;
   struct tm newdate;
   newdate.tm_sec = tmu_date.tm_sec;
@@ -114,10 +127,10 @@ int mymkdir(dirname)
     int ret=0;
 #ifdef _WIN32
     ret = _mkdir(dirname);
-#else
+#elif unix
-#ifdef unix
+    ret = mkdir (dirname,0775);
+#elif __APPLE__
     ret = mkdir (dirname,0775);
-#endif
 #endif
     return ret;
 }
@@ -133,11 +146,11 @@ int makedir (newdir)
     return 0;
 
   buffer = (char*)malloc(len+1);
-	if (buffer==NULL)
+        if (buffer==NULL)
-	{
+        {
-		printf("Error allocating memory\n");
+                printf("Error allocating memory\n");
-		return UNZ_INTERNALERROR;
+                return UNZ_INTERNALERROR;
-	}
+        }
   strcpy(buffer,newdir);
 
   if (buffer[len-1] == '/') {
@@ -364,7 +377,7 @@ int do_extract_currentfile(uf,popt_extract_without_path,popt_overwrite,password)
         {
             char rep=0;
             FILE* ftestexist;
-            ftestexist = fopen64(write_filename,"rb");
+            ftestexist = FOPEN_FUNC(write_filename,"rb");
             if (ftestexist!=NULL)
             {
                 fclose(ftestexist);
@@ -375,7 +388,7 @@ int do_extract_currentfile(uf,popt_extract_without_path,popt_overwrite,password)
 
                     printf("The file %s exists. Overwrite ? [y]es, [n]o, [A]ll: ",write_filename);
                     ret = scanf("%1s",answer);
-                    if (ret != 1) 
+                    if (ret != 1)
                     {
                        exit(EXIT_FAILURE);
                     }
@@ -395,8 +408,7 @@ int do_extract_currentfile(uf,popt_extract_without_path,popt_overwrite,password)
 
         if ((skip==0) && (err==UNZ_OK))
         {
-            fout=fopen64(write_filename,"wb");
+            fout=FOPEN_FUNC(write_filename,"wb");
-
             /* some zipfile don't contain directory alone before file */
             if ((fout==NULL) && ((*popt_extract_without_path)==0) &&
                                 (filename_withoutpath!=(char*)filename_inzip))
@@ -405,7 +417,7 @@ int do_extract_currentfile(uf,popt_extract_without_path,popt_overwrite,password)
                 *(filename_withoutpath-1)='\0';
                 makedir(write_filename);
                 *(filename_withoutpath-1)=c;
-                fout=fopen64(write_filename,"wb");
+                fout=FOPEN_FUNC(write_filename,"wb");
             }
 
             if (fout==NULL)
@@ -627,9 +639,9 @@ int main(argc,argv)
     else if (opt_do_extract==1)
     {
 #ifdef _WIN32
-        if (opt_extractdir && _chdir(dirname)) 
+        if (opt_extractdir && _chdir(dirname))
 #else
-        if (opt_extractdir && chdir(dirname)) 
+        if (opt_extractdir && chdir(dirname))
 #endif
         {
           printf("Error changing into %s, aborting\n", dirname);

contrib/minizip/minizip.c

@@ -1,33 +1,46 @@
 /*
    minizip.c
-   Version 1.1, January 7th, 2010
+   Version 1.1, February 14h, 2010
    sample part of the MiniZip project - ( http://www.winimage.com/zLibDll/minizip.html )
 
-	 Copyright (C) 1998-2010 Gilles Vollant (minizip) ( http://www.winimage.com/zLibDll/minizip.html )
+         Copyright (C) 1998-2010 Gilles Vollant (minizip) ( http://www.winimage.com/zLibDll/minizip.html )
 
-	 Modifications of Unzip for Zip64
+         Modifications of Unzip for Zip64
-	 Copyright (C) 2007-2008 Even Rouault
+         Copyright (C) 2007-2008 Even Rouault
 
-	 Modifications for Zip64 support on both zip and unzip
+         Modifications for Zip64 support on both zip and unzip
-	 Copyright (C) 2009-2010 Mathias Svensson ( http://result42.com )
+         Copyright (C) 2009-2010 Mathias Svensson ( http://result42.com )
 */
 
 
-#ifndef _WIN32 
+#if (!defined(_WIN32)) && (!defined(WIN32)) && (!defined(__APPLE__))
-	#ifndef __USE_FILE_OFFSET64
+        #ifndef __USE_FILE_OFFSET64
-		#define __USE_FILE_OFFSET64
+                #define __USE_FILE_OFFSET64
-	#endif
+        #endif
-	#ifndef __USE_LARGEFILE64
+        #ifndef __USE_LARGEFILE64
-		#define __USE_LARGEFILE64
+                #define __USE_LARGEFILE64
-	#endif
+        #endif
-	#ifndef _LARGEFILE64_SOURCE
+        #ifndef _LARGEFILE64_SOURCE
-		#define _LARGEFILE64_SOURCE
+                #define _LARGEFILE64_SOURCE
-	#endif
+        #endif
-	#ifndef _FILE_OFFSET_BIT
+        #ifndef _FILE_OFFSET_BIT
-		#define _FILE_OFFSET_BIT 64
+                #define _FILE_OFFSET_BIT 64
-	#endif
+        #endif
 #endif
 
+#ifdef __APPLE__
+// In darwin and perhaps other BSD variants off_t is a 64 bit value, hence no need for specific 64 bit functions
+#define FOPEN_FUNC(filename, mode) fopen(filename, mode)
+#define FTELLO_FUNC(stream) ftello(stream)
+#define FSEEKO_FUNC(stream, offset, origin) fseeko(stream, offset, origin)
+#else
+#define FOPEN_FUNC(filename, mode) fopen64(filename, mode)
+#define FTELLO_FUNC(stream) ftello64(stream)
+#define FSEEKO_FUNC(stream, offset, origin) fseeko64(stream, offset, origin)
+#endif
+
+
+
 #include <stdio.h>
 #include <stdlib.h>
 #include <string.h>
@@ -35,21 +48,21 @@
 #include <errno.h>
 #include <fcntl.h>
 
-#ifdef unix
+#ifdef _WIN32
+# include <direct.h>
+# include <io.h>
+#else
 # include <unistd.h>
 # include <utime.h>
 # include <sys/types.h>
 # include <sys/stat.h>
-#else
-# include <direct.h>
-# include <io.h>
 #endif
 
 #include "zip.h"
 
 #ifdef _WIN32
-	#define USEWIN32IOAPI
+        #define USEWIN32IOAPI
-	#include "iowin32.h"
+        #include "iowin32.h"
 #endif
 
 
@@ -81,7 +94,7 @@ uLong filetime(f, tmzip, dt)
   return ret;
 }
 #else
-#ifdef unix
+#ifdef unix || __APPLE__
 uLong filetime(f, tmzip, dt)
     char *f;               /* name of file to get info on */
     tm_zip *tmzip;         /* return value: access, modific. and creation times */
@@ -142,7 +155,7 @@ int check_exist_file(filename)
 {
     FILE* ftestexist;
     int ret = 1;
-    ftestexist = fopen64(filename,"rb");
+    ftestexist = FOPEN_FUNC(filename,"rb");
     if (ftestexist==NULL)
         ret = 0;
     else
@@ -152,9 +165,8 @@ int check_exist_file(filename)
 
 void do_banner()
 {
-    printf("MiniZip64 1.0, demo of zLib + MiniZip64 package, written by Gilles Vollant\n");
+    printf("MiniZip 1.1, demo of zLib + MiniZip64 package, written by Gilles Vollant\n");
     printf("more info on MiniZip at http://www.winimage.com/zLibDll/minizip.html\n\n");
-    printf("more info on MiniZip64 at http://result42.com/projects/MiniZip64\n\n");
 }
 
 void do_help()
@@ -174,7 +186,8 @@ int getFileCrc(const char* filenameinzip,void*buf,unsigned long size_buf,unsigne
 {
    unsigned long calculate_crc=0;
    int err=ZIP_OK;
-   FILE * fin = fopen64(filenameinzip,"rb");
+   FILE * fin = FOPEN_FUNC(filenameinzip,"rb");
+   
    unsigned long size_read = 0;
    unsigned long total_read = 0;
    if (fin==NULL)
@@ -212,22 +225,21 @@ int isLargeFile(const char* filename)
 {
   int largeFile = 0;
   ZPOS64_T pos = 0;
-  FILE* pFile = fopen64(filename, "rb");
+  FILE* pFile = FOPEN_FUNC(filename, "rb");
 
   if(pFile != NULL)
   {
-    int n = fseeko64(pFile, 0, SEEK_END);
+    int n = FSEEKO_FUNC(pFile, 0, SEEK_END);
+    pos = FTELLO_FUNC(pFile);
+
+                printf("File : %s is %lld bytes\n", filename, pos);
 
-    pos = ftello64(pFile);
-    
-		printf("File : %s is %lld bytes\n", filename, pos);
-    
     if(pos >= 0xffffffff)
      largeFile = 1;
 
-		fclose(pFile);
+                fclose(pFile);
   }
-  
+
  return largeFile;
 }
 
@@ -406,10 +418,10 @@ int main(argc,argv)
 */
                 if ((password != NULL) && (err==ZIP_OK))
                     err = getFileCrc(filenameinzip,buf,size_buf,&crcFile);
- 
+
                 zip64 = isLargeFile(filenameinzip);
 
-							 /* The path name saved, should not include a leading slash. */
+                                                         /* The path name saved, should not include a leading slash. */
                /*if it did, windows/xp and dynazip couldn't read the zip file. */
                  savefilenameinzip = filenameinzip;
                  while( savefilenameinzip[0] == '\\' || savefilenameinzip[0] == '/' )
@@ -448,7 +460,7 @@ int main(argc,argv)
                     printf("error in opening %s in zipfile\n",filenameinzip);
                 else
                 {
-                    fin = fopen64(filenameinzip,"rb");
+                    fin = FOPEN_FUNC(filenameinzip,"rb");
                     if (fin==NULL)
                     {
                         err=ZIP_ERRNO;

contrib/minizip/mztools.c

@@ -1,281 +1,281 @@
-/*
+/*
-  Additional tools for Minizip
+  Additional tools for Minizip
-  Code: Xavier Roche '2004
+  Code: Xavier Roche '2004
-  License: Same as ZLIB (www.gzip.org)
+  License: Same as ZLIB (www.gzip.org)
-*/
+*/
-
+
-/* Code */
+/* Code */
-#include <stdio.h>
+#include <stdio.h>
-#include <stdlib.h>
+#include <stdlib.h>
-#include <string.h>
+#include <string.h>
-#include "zlib.h"
+#include "zlib.h"
-#include "unzip.h"
+#include "unzip.h"
-
+
-#define READ_8(adr)  ((unsigned char)*(adr))
+#define READ_8(adr)  ((unsigned char)*(adr))
-#define READ_16(adr) ( READ_8(adr) | (READ_8(adr+1) << 8) )
+#define READ_16(adr) ( READ_8(adr) | (READ_8(adr+1) << 8) )
-#define READ_32(adr) ( READ_16(adr) | (READ_16((adr)+2) << 16) )
+#define READ_32(adr) ( READ_16(adr) | (READ_16((adr)+2) << 16) )
-
+
-#define WRITE_8(buff, n) do { \
+#define WRITE_8(buff, n) do { \
-  *((unsigned char*)(buff)) = (unsigned char) ((n) & 0xff); \
+  *((unsigned char*)(buff)) = (unsigned char) ((n) & 0xff); \
-} while(0)
+} while(0)
-#define WRITE_16(buff, n) do { \
+#define WRITE_16(buff, n) do { \
-  WRITE_8((unsigned char*)(buff), n); \
+  WRITE_8((unsigned char*)(buff), n); \
-  WRITE_8(((unsigned char*)(buff)) + 1, (n) >> 8); \
+  WRITE_8(((unsigned char*)(buff)) + 1, (n) >> 8); \
-} while(0)
+} while(0)
-#define WRITE_32(buff, n) do { \
+#define WRITE_32(buff, n) do { \
-  WRITE_16((unsigned char*)(buff), (n) & 0xffff); \
+  WRITE_16((unsigned char*)(buff), (n) & 0xffff); \
-  WRITE_16((unsigned char*)(buff) + 2, (n) >> 16); \
+  WRITE_16((unsigned char*)(buff) + 2, (n) >> 16); \
-} while(0)
+} while(0)
-
+
-extern int ZEXPORT unzRepair(file, fileOut, fileOutTmp, nRecovered, bytesRecovered)
+extern int ZEXPORT unzRepair(file, fileOut, fileOutTmp, nRecovered, bytesRecovered)
-const char* file;
+const char* file;
-const char* fileOut;
+const char* fileOut;
-const char* fileOutTmp;
+const char* fileOutTmp;
-uLong* nRecovered;
+uLong* nRecovered;
-uLong* bytesRecovered;
+uLong* bytesRecovered;
-{
+{
-  int err = Z_OK;
+  int err = Z_OK;
-  FILE* fpZip = fopen(file, "rb");
+  FILE* fpZip = fopen(file, "rb");
-  FILE* fpOut = fopen(fileOut, "wb");
+  FILE* fpOut = fopen(fileOut, "wb");
-  FILE* fpOutCD = fopen(fileOutTmp, "wb");
+  FILE* fpOutCD = fopen(fileOutTmp, "wb");
-  if (fpZip != NULL &&  fpOut != NULL) {
+  if (fpZip != NULL &&  fpOut != NULL) {
-    int entries = 0;
+    int entries = 0;
-    uLong totalBytes = 0;
+    uLong totalBytes = 0;
-    char header[30];
+    char header[30];
-    char filename[256];
+    char filename[256];
-    char extra[1024];
+    char extra[1024];
-    int offset = 0;
+    int offset = 0;
-    int offsetCD = 0;
+    int offsetCD = 0;
-    while ( fread(header, 1, 30, fpZip) == 30 ) {
+    while ( fread(header, 1, 30, fpZip) == 30 ) {
-      int currentOffset = offset;
+      int currentOffset = offset;
-
+
-      /* File entry */
+      /* File entry */
-      if (READ_32(header) == 0x04034b50) {
+      if (READ_32(header) == 0x04034b50) {
-        unsigned int version = READ_16(header + 4);
+        unsigned int version = READ_16(header + 4);
-        unsigned int gpflag = READ_16(header + 6);
+        unsigned int gpflag = READ_16(header + 6);
-        unsigned int method = READ_16(header + 8);
+        unsigned int method = READ_16(header + 8);
-        unsigned int filetime = READ_16(header + 10);
+        unsigned int filetime = READ_16(header + 10);
-        unsigned int filedate = READ_16(header + 12);
+        unsigned int filedate = READ_16(header + 12);
-        unsigned int crc = READ_32(header + 14); /* crc */
+        unsigned int crc = READ_32(header + 14); /* crc */
-        unsigned int cpsize = READ_32(header + 18); /* compressed size */
+        unsigned int cpsize = READ_32(header + 18); /* compressed size */
-        unsigned int uncpsize = READ_32(header + 22); /* uncompressed sz */
+        unsigned int uncpsize = READ_32(header + 22); /* uncompressed sz */
-        unsigned int fnsize = READ_16(header + 26); /* file name length */
+        unsigned int fnsize = READ_16(header + 26); /* file name length */
-        unsigned int extsize = READ_16(header + 28); /* extra field length */
+        unsigned int extsize = READ_16(header + 28); /* extra field length */
-        filename[0] = extra[0] = '\0';
+        filename[0] = extra[0] = '\0';
-        
+
-        /* Header */
+        /* Header */
-        if (fwrite(header, 1, 30, fpOut) == 30) {
+        if (fwrite(header, 1, 30, fpOut) == 30) {
-          offset += 30;
+          offset += 30;
-        } else {
+        } else {
-          err = Z_ERRNO;
+          err = Z_ERRNO;
-          break;
+          break;
-        }
+        }
-        
+
-        /* Filename */
+        /* Filename */
-        if (fnsize > 0) {
+        if (fnsize > 0) {
-          if (fread(filename, 1, fnsize, fpZip) == fnsize) {
+          if (fread(filename, 1, fnsize, fpZip) == fnsize) {
-            if (fwrite(filename, 1, fnsize, fpOut) == fnsize) {
+            if (fwrite(filename, 1, fnsize, fpOut) == fnsize) {
-              offset += fnsize;
+              offset += fnsize;
-            } else {
+            } else {
-              err = Z_ERRNO;
+              err = Z_ERRNO;
-              break;
+              break;
-            }
+            }
-          } else {
+          } else {
-            err = Z_ERRNO;
+            err = Z_ERRNO;
-            break;
+            break;
-          }
+          }
-        } else {
+        } else {
-          err = Z_STREAM_ERROR;
+          err = Z_STREAM_ERROR;
-          break;
+          break;
-        }
+        }
-
+
-        /* Extra field */
+        /* Extra field */
-        if (extsize > 0) {
+        if (extsize > 0) {
-          if (fread(extra, 1, extsize, fpZip) == extsize) {
+          if (fread(extra, 1, extsize, fpZip) == extsize) {
-            if (fwrite(extra, 1, extsize, fpOut) == extsize) {
+            if (fwrite(extra, 1, extsize, fpOut) == extsize) {
-              offset += extsize;
+              offset += extsize;
-            } else {
+            } else {
-              err = Z_ERRNO;
+              err = Z_ERRNO;
-              break;
+              break;
-            }
+            }
-          } else {
+          } else {
-            err = Z_ERRNO;
+            err = Z_ERRNO;
-            break;
+            break;
-          }
+          }
-        }
+        }
-        
+
-        /* Data */
+        /* Data */
-        {
+        {
-          int dataSize = cpsize;
+          int dataSize = cpsize;
-          if (dataSize == 0) {
+          if (dataSize == 0) {
-            dataSize = uncpsize;
+            dataSize = uncpsize;
-          }
+          }
-          if (dataSize > 0) {
+          if (dataSize > 0) {
-            char* data = malloc(dataSize);
+            char* data = malloc(dataSize);
-            if (data != NULL) {
+            if (data != NULL) {
-              if ((int)fread(data, 1, dataSize, fpZip) == dataSize) {
+              if ((int)fread(data, 1, dataSize, fpZip) == dataSize) {
-                if ((int)fwrite(data, 1, dataSize, fpOut) == dataSize) {
+                if ((int)fwrite(data, 1, dataSize, fpOut) == dataSize) {
-                  offset += dataSize;
+                  offset += dataSize;
-                  totalBytes += dataSize;
+                  totalBytes += dataSize;
-                } else {
+                } else {
-                  err = Z_ERRNO;
+                  err = Z_ERRNO;
-                }
+                }
-              } else {
+              } else {
-                err = Z_ERRNO;
+                err = Z_ERRNO;
-              }
+              }
-              free(data);
+              free(data);
-              if (err != Z_OK) {
+              if (err != Z_OK) {
-                break;
+                break;
-              }
+              }
-            } else {
+            } else {
-              err = Z_MEM_ERROR;
+              err = Z_MEM_ERROR;
-              break;
+              break;
-            }
+            }
-          }
+          }
-        }
+        }
-        
+
-        /* Central directory entry */
+        /* Central directory entry */
-        {
+        {
-          char header[46];
+          char header[46];
-          char* comment = "";
+          char* comment = "";
-          int comsize = (int) strlen(comment);
+          int comsize = (int) strlen(comment);
-          WRITE_32(header, 0x02014b50);
+          WRITE_32(header, 0x02014b50);
-          WRITE_16(header + 4, version);
+          WRITE_16(header + 4, version);
-          WRITE_16(header + 6, version);
+          WRITE_16(header + 6, version);
-          WRITE_16(header + 8, gpflag);
+          WRITE_16(header + 8, gpflag);
-          WRITE_16(header + 10, method);
+          WRITE_16(header + 10, method);
-          WRITE_16(header + 12, filetime);
+          WRITE_16(header + 12, filetime);
-          WRITE_16(header + 14, filedate);
+          WRITE_16(header + 14, filedate);
-          WRITE_32(header + 16, crc);
+          WRITE_32(header + 16, crc);
-          WRITE_32(header + 20, cpsize);
+          WRITE_32(header + 20, cpsize);
-          WRITE_32(header + 24, uncpsize);
+          WRITE_32(header + 24, uncpsize);
-          WRITE_16(header + 28, fnsize);
+          WRITE_16(header + 28, fnsize);
-          WRITE_16(header + 30, extsize);
+          WRITE_16(header + 30, extsize);
-          WRITE_16(header + 32, comsize);
+          WRITE_16(header + 32, comsize);
-          WRITE_16(header + 34, 0);     /* disk # */
+          WRITE_16(header + 34, 0);     /* disk # */
-          WRITE_16(header + 36, 0);     /* int attrb */
+          WRITE_16(header + 36, 0);     /* int attrb */
-          WRITE_32(header + 38, 0);     /* ext attrb */
+          WRITE_32(header + 38, 0);     /* ext attrb */
-          WRITE_32(header + 42, currentOffset);
+          WRITE_32(header + 42, currentOffset);
-          /* Header */
+          /* Header */
-          if (fwrite(header, 1, 46, fpOutCD) == 46) {
+          if (fwrite(header, 1, 46, fpOutCD) == 46) {
-            offsetCD += 46;
+            offsetCD += 46;
-            
+
-            /* Filename */
+            /* Filename */
-            if (fnsize > 0) {
+            if (fnsize > 0) {
-              if (fwrite(filename, 1, fnsize, fpOutCD) == fnsize) {
+              if (fwrite(filename, 1, fnsize, fpOutCD) == fnsize) {
-                offsetCD += fnsize;
+                offsetCD += fnsize;
-              } else {
+              } else {
-                err = Z_ERRNO;
+                err = Z_ERRNO;
-                break;
+                break;
-              }
+              }
-            } else {
+            } else {
-              err = Z_STREAM_ERROR;
+              err = Z_STREAM_ERROR;
-              break;
+              break;
-            }
+            }
-            
+
-            /* Extra field */
+            /* Extra field */
-            if (extsize > 0) {
+            if (extsize > 0) {
-              if (fwrite(extra, 1, extsize, fpOutCD) == extsize) {
+              if (fwrite(extra, 1, extsize, fpOutCD) == extsize) {
-                offsetCD += extsize;
+                offsetCD += extsize;
-              } else {
+              } else {
-                err = Z_ERRNO;
+                err = Z_ERRNO;
-                break;
+                break;
-              }
+              }
-            }
+            }
-            
+
-            /* Comment field */
+            /* Comment field */
-            if (comsize > 0) {
+            if (comsize > 0) {
-              if ((int)fwrite(comment, 1, comsize, fpOutCD) == comsize) {
+              if ((int)fwrite(comment, 1, comsize, fpOutCD) == comsize) {
-                offsetCD += comsize;
+                offsetCD += comsize;
-              } else {
+              } else {
-                err = Z_ERRNO;
+                err = Z_ERRNO;
-                break;
+                break;
-              }
+              }
-            }
+            }
-            
+
-            
+
-          } else {
+          } else {
-            err = Z_ERRNO;
+            err = Z_ERRNO;
-            break;
+            break;
-          }
+          }
-        }
+        }
-
+
-        /* Success */
+        /* Success */
-        entries++;
+        entries++;
-
+
-      } else {
+      } else {
-        break;
+        break;
-      }
+      }
-    }
+    }
-
+
-    /* Final central directory  */
+    /* Final central directory  */
-    {
+    {
-      int entriesZip = entries;
+      int entriesZip = entries;
-      char header[22];
+      char header[22];
-      char* comment = ""; // "ZIP File recovered by zlib/minizip/mztools";
+      char* comment = ""; // "ZIP File recovered by zlib/minizip/mztools";
-      int comsize = (int) strlen(comment);
+      int comsize = (int) strlen(comment);
-      if (entriesZip > 0xffff) {
+      if (entriesZip > 0xffff) {
-        entriesZip = 0xffff;
+        entriesZip = 0xffff;
-      }
+      }
-      WRITE_32(header, 0x06054b50);
+      WRITE_32(header, 0x06054b50);
-      WRITE_16(header + 4, 0);    /* disk # */
+      WRITE_16(header + 4, 0);    /* disk # */
-      WRITE_16(header + 6, 0);    /* disk # */
+      WRITE_16(header + 6, 0);    /* disk # */
-      WRITE_16(header + 8, entriesZip);   /* hack */
+      WRITE_16(header + 8, entriesZip);   /* hack */
-      WRITE_16(header + 10, entriesZip);  /* hack */
+      WRITE_16(header + 10, entriesZip);  /* hack */
-      WRITE_32(header + 12, offsetCD);    /* size of CD */
+      WRITE_32(header + 12, offsetCD);    /* size of CD */
-      WRITE_32(header + 16, offset);      /* offset to CD */
+      WRITE_32(header + 16, offset);      /* offset to CD */
-      WRITE_16(header + 20, comsize);     /* comment */
+      WRITE_16(header + 20, comsize);     /* comment */
-      
+
-      /* Header */
+      /* Header */
-      if (fwrite(header, 1, 22, fpOutCD) == 22) {
+      if (fwrite(header, 1, 22, fpOutCD) == 22) {
-        
+
-        /* Comment field */
+        /* Comment field */
-        if (comsize > 0) {
+        if (comsize > 0) {
-          if ((int)fwrite(comment, 1, comsize, fpOutCD) != comsize) {
+          if ((int)fwrite(comment, 1, comsize, fpOutCD) != comsize) {
-            err = Z_ERRNO;
+            err = Z_ERRNO;
-          }
+          }
-        }
+        }
-        
+
-      } else {
+      } else {
-        err = Z_ERRNO;
+        err = Z_ERRNO;
-      }
+      }
-    }
+    }
-
+
-    /* Final merge (file + central directory) */
+    /* Final merge (file + central directory) */
-    fclose(fpOutCD);
+    fclose(fpOutCD);
-    if (err == Z_OK) {
+    if (err == Z_OK) {
-      fpOutCD = fopen(fileOutTmp, "rb");
+      fpOutCD = fopen(fileOutTmp, "rb");
-      if (fpOutCD != NULL) {
+      if (fpOutCD != NULL) {
-        int nRead;
+        int nRead;
-        char buffer[8192];
+        char buffer[8192];
-        while ( (nRead = (int)fread(buffer, 1, sizeof(buffer), fpOutCD)) > 0) {
+        while ( (nRead = (int)fread(buffer, 1, sizeof(buffer), fpOutCD)) > 0) {
-          if ((int)fwrite(buffer, 1, nRead, fpOut) != nRead) {
+          if ((int)fwrite(buffer, 1, nRead, fpOut) != nRead) {
-            err = Z_ERRNO;
+            err = Z_ERRNO;
-            break;
+            break;
-          }
+          }
-        }
+        }
-        fclose(fpOutCD);
+        fclose(fpOutCD);
-      }
+      }
-    }
+    }
-    
+
-    /* Close */
+    /* Close */
-    fclose(fpZip);
+    fclose(fpZip);
-    fclose(fpOut);
+    fclose(fpOut);
-    
+
-    /* Wipe temporary file */
+    /* Wipe temporary file */
-    (void)remove(fileOutTmp);
+    (void)remove(fileOutTmp);
-    
+
-    /* Number of recovered entries */
+    /* Number of recovered entries */
-    if (err == Z_OK) {
+    if (err == Z_OK) {
-      if (nRecovered != NULL) {
+      if (nRecovered != NULL) {
-        *nRecovered = entries;
+        *nRecovered = entries;
-      }
+      }
-      if (bytesRecovered != NULL) {
+      if (bytesRecovered != NULL) {
-        *bytesRecovered = totalBytes;
+        *bytesRecovered = totalBytes;
-      }
+      }
-    }
+    }
-  } else {
+  } else {
-    err = Z_STREAM_ERROR;
+    err = Z_STREAM_ERROR;
-  }
+  }
-  return err;
+  return err;
-}
+}

contrib/minizip/mztools.h

@@ -1,31 +1,31 @@
-/*
+/*
-  Additional tools for Minizip
+  Additional tools for Minizip
-  Code: Xavier Roche '2004
+  Code: Xavier Roche '2004
-  License: Same as ZLIB (www.gzip.org)
+  License: Same as ZLIB (www.gzip.org)
-*/
+*/
-
+
-#ifndef _zip_tools_H
+#ifndef _zip_tools_H
-#define _zip_tools_H
+#define _zip_tools_H
-
+
-#ifdef __cplusplus
+#ifdef __cplusplus
-extern "C" {
+extern "C" {
-#endif
+#endif
-
+
-#ifndef _ZLIB_H
+#ifndef _ZLIB_H
-#include "zlib.h"
+#include "zlib.h"
-#endif
+#endif
-
+
-#include "unzip.h"
+#include "unzip.h"
-
+
-/* Repair a ZIP file (missing central directory) 
+/* Repair a ZIP file (missing central directory)
-   file: file to recover
+   file: file to recover
-   fileOut: output file after recovery
+   fileOut: output file after recovery
-   fileOutTmp: temporary file name used for recovery
+   fileOutTmp: temporary file name used for recovery
-*/
+*/
-extern int ZEXPORT unzRepair(const char* file, 
+extern int ZEXPORT unzRepair(const char* file,
-                             const char* fileOut, 
+                             const char* fileOut,
-                             const char* fileOutTmp, 
+                             const char* fileOutTmp,
-                             uLong* nRecovered,
+                             uLong* nRecovered,
-                             uLong* bytesRecovered);
+                             uLong* bytesRecovered);
-
+
-#endif
+#endif

contrib/minizip/unzip.c

@@ -1,21 +1,21 @@
 /* unzip.c -- IO for uncompress .zip files using zlib
-   Version 1.1, January 7th, 2010
+   Version 1.1, February 14h, 2010
    part of the MiniZip project - ( http://www.winimage.com/zLibDll/minizip.html )
 
-	 Copyright (C) 1998-2010 Gilles Vollant (minizip) ( http://www.winimage.com/zLibDll/minizip.html )
+         Copyright (C) 1998-2010 Gilles Vollant (minizip) ( http://www.winimage.com/zLibDll/minizip.html )
 
-	 Modifications of Unzip for Zip64
+         Modifications of Unzip for Zip64
-	 Copyright (C) 2007-2008 Even Rouault
+         Copyright (C) 2007-2008 Even Rouault
 
-	 Modifications for Zip64 support on both zip and unzip
+         Modifications for Zip64 support on both zip and unzip
-	 Copyright (C) 2009-2010 Mathias Svensson ( http://result42.com )
+         Copyright (C) 2009-2010 Mathias Svensson ( http://result42.com )
 
-	 For more info read MiniZip_info.txt
+         For more info read MiniZip_info.txt
 
 
   ------------------------------------------------------------------------------------
   Decryption code comes from crypt.c by Info-ZIP but has been greatly reduced in terms of
-  compatibility with older software. The following is from the original crypt.c. 
+  compatibility with older software. The following is from the original crypt.c.
   Code woven in by Terry Thorsen 1/2003.
 
   Copyright (c) 1990-2000 Info-ZIP.  All rights reserved.
@@ -25,39 +25,41 @@
   If, for some reason, all these files are missing, the Info-ZIP license
   also may be found at:  ftp://ftp.info-zip.org/pub/infozip/license.html
 
-	crypt.c (full version) by Info-ZIP.      Last revised:  [see crypt.h]
+        crypt.c (full version) by Info-ZIP.      Last revised:  [see crypt.h]
 
   The encryption/decryption parts of this source code (as opposed to the
   non-echoing password parts) were originally written in Europe.  The
   whole source package can be freely distributed, including from the USA.
   (Prior to January 2000, re-export from the US was a violation of US law.)
 
-	This encryption code is a direct transcription of the algorithm from
+        This encryption code is a direct transcription of the algorithm from
   Roger Schlafly, described by Phil Katz in the file appnote.txt.  This
   file (appnote.txt) is distributed with the PKZIP program (even in the
   version without encryption capabilities).
 
-	------------------------------------------------------------------------------------
+        ------------------------------------------------------------------------------------
 
-	Changes in unzip64.c
+        Changes in unzip.c
 
-	2007-2008 - Even Rouault - Addition of cpl_unzGetCurrentFileZStreamPos
+        2007-2008 - Even Rouault - Addition of cpl_unzGetCurrentFileZStreamPos
   2007-2008 - Even Rouault - Decoration of symbol names unz* -> cpl_unz*
   2007-2008 - Even Rouault - Remove old C style function prototypes
   2007-2008 - Even Rouault - Add unzip support for ZIP64
-	
+
-	Copyright (C) 2007-2008 Even Rouault
+        Copyright (C) 2007-2008 Even Rouault
 
 
-	Okt-2009 - Mathias Svensson - Removed cpl_* from symbol names (Even Rouault added them but since this is now moved to a new project (minizip64) I renamed them again).
+        Oct-2009 - Mathias Svensson - Removed cpl_* from symbol names (Even Rouault added them but since this is now moved to a new project (minizip64) I renamed them again).
-  Okt-2009 - Mathias Svensson - Fixed problem if uncompressed size was > 4G and compressed size was <4G
+  Oct-2009 - Mathias Svensson - Fixed problem if uncompressed size was > 4G and compressed size was <4G
-                                should only read the compressed/uncompressed size from the Zip64 format if 
+                                should only read the compressed/uncompressed size from the Zip64 format if
                                 the size from normal header was 0xFFFFFFFF
-  Okt-2009 - Mathias Svensson - Applied some bug fixes from paches recived from Gilles Vollant
+  Oct-2009 - Mathias Svensson - Applied some bug fixes from paches recived from Gilles Vollant
-	Okt-2009 - Mathias Svensson - Applied support to unzip files with compression mathod BZIP2 (bzip2 lib is required)
+        Oct-2009 - Mathias Svensson - Applied support to unzip files with compression mathod BZIP2 (bzip2 lib is required)
                                 Patch created by Daniel Borca
 
-  Copyright (C) 2009 Mathias Svensson
+  Jan-2010 - back to unzip and minizip 1.0 name scheme, with compatibility layer
+
+  Copyright (C) 1998 - 2010 Gilles Vollant, Even Rouault, Mathias Svensson
 
 */
 
@@ -67,7 +69,7 @@
 #include <string.h>
 
 #ifndef NOUNCRYPT
-	#define NOUNCRYPT
+        #define NOUNCRYPT
 #endif
 
 #include "zlib.h"
@@ -482,7 +484,7 @@ local ZPOS64_T unz64local_SearchCentralDir64(const zlib_filefunc64_32_def* pzlib
     ZPOS64_T uMaxBack=0xffff; /* maximum size of global comment */
     ZPOS64_T uPosFound=0;
     uLong uL;
-		ZPOS64_T relativeOffset;
+                ZPOS64_T relativeOffset;
 
     if (ZSEEK64(*pzlib_filefunc_def,filestream,0,ZLIB_FILEFUNC_SEEK_END) != 0)
         return 0;
@@ -957,7 +959,7 @@ local int unz64local_GetCurrentFileInfoInternal (unzFile file,
     if (unz64local_getLong(&s->z_filefunc, s->filestream,&file_info.external_fa) != UNZ_OK)
         err=UNZ_ERRNO;
 
-		// relative offset of local header
+                // relative offset of local header
     if (unz64local_getLong(&s->z_filefunc, s->filestream,&uL) != UNZ_OK)
         err=UNZ_ERRNO;
     file_info_internal.offset_curfile = uL;
@@ -1009,8 +1011,8 @@ local int unz64local_GetCurrentFileInfoInternal (unzFile file,
 
     if ((err==UNZ_OK) && (file_info.size_file_extra != 0))
     {
-				uLong acc = 0;
+                                uLong acc = 0;
-        
+
         // since lSeek now points to after the extra field we need to move back
         lSeek -= file_info.size_file_extra;
 
@@ -1025,7 +1027,7 @@ local int unz64local_GetCurrentFileInfoInternal (unzFile file,
         while(acc < file_info.size_file_extra)
         {
             uLong headerId;
-						uLong dataSize;
+                                                uLong dataSize;
 
             if (unz64local_getShort(&s->z_filefunc, s->filestream,&headerId) != UNZ_OK)
                 err=UNZ_ERRNO;
@@ -1036,33 +1038,33 @@ local int unz64local_GetCurrentFileInfoInternal (unzFile file,
             /* ZIP64 extra fields */
             if (headerId == 0x0001)
             {
-							uLong uL;
+                                                        uLong uL;
 
-								if(file_info.uncompressed_size == (ZPOS64_T)(unsigned long)-1)
+                                                                if(file_info.uncompressed_size == (ZPOS64_T)(unsigned long)-1)
-								{
+                                                                {
-									if (unz64local_getLong64(&s->z_filefunc, s->filestream,&file_info.uncompressed_size) != UNZ_OK)
+                                                                        if (unz64local_getLong64(&s->z_filefunc, s->filestream,&file_info.uncompressed_size) != UNZ_OK)
-											err=UNZ_ERRNO;
+                                                                                        err=UNZ_ERRNO;
-								}
+                                                                }
 
-								if(file_info.compressed_size == (ZPOS64_T)(unsigned long)-1)
+                                                                if(file_info.compressed_size == (ZPOS64_T)(unsigned long)-1)
-								{
+                                                                {
-									if (unz64local_getLong64(&s->z_filefunc, s->filestream,&file_info.compressed_size) != UNZ_OK)
+                                                                        if (unz64local_getLong64(&s->z_filefunc, s->filestream,&file_info.compressed_size) != UNZ_OK)
-										  err=UNZ_ERRNO;
+                                                                                  err=UNZ_ERRNO;
-								}
+                                                                }
 
-								if(file_info_internal.offset_curfile == (ZPOS64_T)(unsigned long)-1)
+                                                                if(file_info_internal.offset_curfile == (ZPOS64_T)(unsigned long)-1)
-								{
+                                                                {
-									/* Relative Header offset */
+                                                                        /* Relative Header offset */
-									if (unz64local_getLong64(&s->z_filefunc, s->filestream,&file_info_internal.offset_curfile) != UNZ_OK)
+                                                                        if (unz64local_getLong64(&s->z_filefunc, s->filestream,&file_info_internal.offset_curfile) != UNZ_OK)
-										err=UNZ_ERRNO;
+                                                                                err=UNZ_ERRNO;
-								}
+                                                                }
 
-								if(file_info.disk_num_start == (unsigned long)-1)
+                                                                if(file_info.disk_num_start == (unsigned long)-1)
-								{
+                                                                {
-									/* Disk Start Number */
+                                                                        /* Disk Start Number */
-									if (unz64local_getLong(&s->z_filefunc, s->filestream,&uL) != UNZ_OK)
+                                                                        if (unz64local_getLong(&s->z_filefunc, s->filestream,&uL) != UNZ_OK)
-										err=UNZ_ERRNO;
+                                                                                err=UNZ_ERRNO;
-								}
+                                                                }
 
             }
             else
@@ -1143,7 +1145,7 @@ extern int ZEXPORT unzGetCurrentFileInfo (unzFile file,
                                                 szFileName,fileNameBufferSize,
                                                 extraField,extraFieldBufferSize,
                                                 szComment,commentBufferSize);
-    if (err==UNZ_OK)
+    if ((err==UNZ_OK) && (pfile_info != NULL))
     {
         pfile_info->version = file_info64.version;
         pfile_info->version_needed = file_info64.version_needed;
@@ -1608,7 +1610,7 @@ extern int ZEXPORT unzOpenCurrentFile3 (unzFile file, int* method,
     pfile_in_zip_read_info->stream.avail_in = (uInt)0;
 
     s->pfile_in_zip_read = pfile_in_zip_read_info;
-		s->encrypted = 0;
+                s->encrypted = 0;
 
 #    ifndef NOUNCRYPT
     if (password != NULL)
@@ -1826,7 +1828,7 @@ extern int ZEXPORT unzReadCurrentFile  (unzFile file, voidp buf, unsigned len)
             pfile_in_zip_read_info->stream.next_out  = (Bytef*)pfile_in_zip_read_info->bstream.next_out;
             pfile_in_zip_read_info->stream.avail_out = pfile_in_zip_read_info->bstream.avail_out;
             pfile_in_zip_read_info->stream.total_out = pfile_in_zip_read_info->bstream.total_out_lo32;
-            
+
             if (err==BZ_STREAM_END)
               return (iRead==0) ? UNZ_EOF : iRead;
             if (err!=BZ_OK)
@@ -2051,7 +2053,7 @@ extern int ZEXPORT unzGetGlobalComment (unzFile file, char * szComment, uLong uS
     unz64_s* s;
     uLong uReadThis ;
     if (file==NULL)
-        return (uLong)UNZ_PARAMERROR;
+        return (int)UNZ_PARAMERROR;
     s=(unz64_s*)file;
 
     uReadThis = uSizeBuf;

contrib/minizip/unzip.h

@@ -1,20 +1,20 @@
 /* unzip.h -- IO for uncompress .zip files using zlib
-   Version 1.1, January 7th, 2010
+   Version 1.1, February 14h, 2010
    part of the MiniZip project - ( http://www.winimage.com/zLibDll/minizip.html )
 
-	 Copyright (C) 1998-2010 Gilles Vollant (minizip) ( http://www.winimage.com/zLibDll/minizip.html )
+         Copyright (C) 1998-2010 Gilles Vollant (minizip) ( http://www.winimage.com/zLibDll/minizip.html )
 
-	 Modifications of Unzip for Zip64
+         Modifications of Unzip for Zip64
-	 Copyright (C) 2007-2008 Even Rouault
+         Copyright (C) 2007-2008 Even Rouault
 
-	 Modifications for Zip64 support on both zip and unzip
+         Modifications for Zip64 support on both zip and unzip
-	 Copyright (C) 2009-2010 Mathias Svensson ( http://result42.com )
+         Copyright (C) 2009-2010 Mathias Svensson ( http://result42.com )
 
-	 For more info read MiniZip_info.txt
+         For more info read MiniZip_info.txt
 
-	 ---------------------------------------------------------------------------------
+         ---------------------------------------------------------------------------------
- 
+
-	Condition of use and distribution are the same than zlib :
+        Condition of use and distribution are the same than zlib :
 
   This software is provided 'as-is', without any express or implied
   warranty.  In no event will the authors be held liable for any damages
@@ -34,9 +34,9 @@
 
   ---------------------------------------------------------------------------------
 
-	Changes
+        Changes
 
-	See header of unzip64.c 
+        See header of unzip64.c
 
 */
 

contrib/minizip/zip.c

@@ -1,22 +1,23 @@
 /* zip.c -- IO on .zip files using zlib
-   Version 1.1, January 7th, 2010
+   Version 1.1, February 14h, 2010
    part of the MiniZip project - ( http://www.winimage.com/zLibDll/minizip.html )
 
-	 Copyright (C) 1998-2010 Gilles Vollant (minizip) ( http://www.winimage.com/zLibDll/minizip.html )
+         Copyright (C) 1998-2010 Gilles Vollant (minizip) ( http://www.winimage.com/zLibDll/minizip.html )
 
-	 Modifications for Zip64 support
+         Modifications for Zip64 support
-	 Copyright (C) 2009-2010 Mathias Svensson ( http://result42.com )
+         Copyright (C) 2009-2010 Mathias Svensson ( http://result42.com )
 
-	 For more info read MiniZip_info.txt
+         For more info read MiniZip_info.txt
 
-	 Changes
+         Changes
-   Okt-2009 - Mathias Svensson - Remove old C style function prototypes
+   Oct-2009 - Mathias Svensson - Remove old C style function prototypes
-   Okt-2009 - Mathias Svensson - Added Zip64 Support when creating new file archives
+   Oct-2009 - Mathias Svensson - Added Zip64 Support when creating new file archives
-   Okt-2009 - Mathias Svensson - Did some code cleanup and refactoring to get better overview of some functions.
+   Oct-2009 - Mathias Svensson - Did some code cleanup and refactoring to get better overview of some functions.
-   Okt-2009 - Mathias Svensson - Added zipRemoveExtraInfoBlock to strip extra field data from its ZIP64 data
+   Oct-2009 - Mathias Svensson - Added zipRemoveExtraInfoBlock to strip extra field data from its ZIP64 data
                                  It is used when recreting zip archive with RAW when deleting items from a zip.
                                  ZIP64 data is automaticly added to items that needs it, and existing ZIP64 data need to be removed.
-   Okt-2009 - Mathias Svensson - Added support for BZIP2 as compression mode (bzip2 lib is required)
+   Oct-2009 - Mathias Svensson - Added support for BZIP2 as compression mode (bzip2 lib is required)
+   Jan-2010 - back to unzip and minizip 1.0 name scheme, with compatibility layer
 
 */
 
@@ -73,7 +74,7 @@
 
 
 // NOT sure that this work on ALL platform
-#define MAKEULONG64(a, b) ((ZPOS64_T)(((unsigned long)(a)) | ((ZPOS64_T)((unsigned long)(b))) << 32)) 
+#define MAKEULONG64(a, b) ((ZPOS64_T)(((unsigned long)(a)) | ((ZPOS64_T)((unsigned long)(b))) << 32))
 
 #ifndef SEEK_CUR
 #define SEEK_CUR    1
@@ -759,7 +760,7 @@ int LoadCentralDirectoryRecord(zip64_internal* pziinit)
     number_entry_CD = 0;
     if (zip64local_getShort(&pziinit->z_filefunc, pziinit->filestream, &uL)!=ZIP_OK)
       err=ZIP_ERRNO;
-    else 
+    else
       number_entry_CD = uL;
 
     if ((number_entry_CD!=number_entry) || (number_disk_with_CD!=0) || (number_disk!=0))
@@ -1021,7 +1022,7 @@ int Write_LocalFileHeader(zip64_internal* zi, const char* filename, uInt size_ex
       err = ZIP_ERRNO;
   }
 
-  
+
   if ((err==ZIP_OK) && (zi->ci.zip64))
   {
       // write the Zip64 extended info
@@ -1035,7 +1036,7 @@ int Write_LocalFileHeader(zip64_internal* zi, const char* filename, uInt size_ex
 
       err = zip64local_putValue(&zi->z_filefunc, zi->filestream, (short)HeaderID,2);
       err = zip64local_putValue(&zi->z_filefunc, zi->filestream, (short)DataSize,2);
-      
+
       err = zip64local_putValue(&zi->z_filefunc, zi->filestream, (ZPOS64_T)UncompressedSize,8);
       err = zip64local_putValue(&zi->z_filefunc, zi->filestream, (ZPOS64_T)CompressedSize,8);
   }
@@ -1044,11 +1045,11 @@ int Write_LocalFileHeader(zip64_internal* zi, const char* filename, uInt size_ex
 }
 
 /*
- NOTE. 
+ NOTE.
  When writing RAW the ZIP64 extended information in extrafield_local and extrafield_global needs to be stripped
  before calling this function it can be done with zipRemoveExtraInfoBlock
 
- It is not done here because then we need to realloc a new buffer since parameters are 'const' and I want to minimize 
+ It is not done here because then we need to realloc a new buffer since parameters are 'const' and I want to minimize
  unnecessary allocations.
  */
 extern int ZEXPORT zipOpenNewFileInZip4_64 (zipFile file, const char* filename, const zip_fileinfo* zipfi,
@@ -1106,7 +1107,7 @@ extern int ZEXPORT zipOpenNewFileInZip4_64 (zipFile file, const char* filename,
     {
         if (zipfi->dosDate != 0)
             zi->ci.dosDate = zipfi->dosDate;
-        else 
+        else
           zi->ci.dosDate = zip64local_TmzDateToDosDate(&zipfi->tmz_date);
     }
 
@@ -1305,7 +1306,7 @@ extern int ZEXPORT zipOpenNewFileInZip3_64(zipFile file, const char* filename, c
                                  windowBits, memLevel, strategy,
                                  password, crcForCrypting, VERSIONMADEBY, 0, zip64);
 }
-                                         
+
 extern int ZEXPORT zipOpenNewFileInZip2(zipFile file, const char* filename, const zip_fileinfo* zipfi,
                                         const void* extrafield_local, uInt size_extrafield_local,
                                         const void* extrafield_global, uInt size_extrafield_global,
@@ -1393,7 +1394,7 @@ local int zip64FlushWriteBuffer(zip64_internal* zi)
 
 
     zi->ci.pos_in_buffered_data = 0;
-    
+
     return err;
 }
 
@@ -1526,22 +1527,22 @@ extern int ZEXPORT zipCloseFileInZipRaw64 (zipFile file, ZPOS64_T uncompressed_s
     zi->ci.stream.avail_in = 0;
 
     if ((zi->ci.method == Z_DEFLATED) && (!zi->ci.raw))
-		{
+                {
-			while (err==ZIP_OK)
+                        while (err==ZIP_OK)
-			{
+                        {
-				uLong uTotalOutBefore;
+                                uLong uTotalOutBefore;
-				if (zi->ci.stream.avail_out == 0)
+                                if (zi->ci.stream.avail_out == 0)
-				{
+                                {
-					if (zip64FlushWriteBuffer(zi) == ZIP_ERRNO)
+                                        if (zip64FlushWriteBuffer(zi) == ZIP_ERRNO)
-						err = ZIP_ERRNO;
+                                                err = ZIP_ERRNO;
-					zi->ci.stream.avail_out = (uInt)Z_BUFSIZE;
+                                        zi->ci.stream.avail_out = (uInt)Z_BUFSIZE;
-					zi->ci.stream.next_out = zi->ci.buffered_data;
+                                        zi->ci.stream.next_out = zi->ci.buffered_data;
-				}
+                                }
-				uTotalOutBefore = zi->ci.stream.total_out;
+                                uTotalOutBefore = zi->ci.stream.total_out;
-				err=deflate(&zi->ci.stream,  Z_FINISH);
+                                err=deflate(&zi->ci.stream,  Z_FINISH);
-				zi->ci.pos_in_buffered_data += (uInt)(zi->ci.stream.total_out - uTotalOutBefore) ;
+                                zi->ci.pos_in_buffered_data += (uInt)(zi->ci.stream.total_out - uTotalOutBefore) ;
-			}
+                        }
-		}
+                }
     else if ((zi->ci.method == Z_BZIP2ED) && (!zi->ci.raw))
     {
 #ifdef HAVE_BZIP2
@@ -1573,15 +1574,15 @@ extern int ZEXPORT zipCloseFileInZipRaw64 (zipFile file, ZPOS64_T uncompressed_s
         err=ZIP_OK; /* this is normal */
 
     if ((zi->ci.pos_in_buffered_data>0) && (err==ZIP_OK))
-		{
+                {
         if (zip64FlushWriteBuffer(zi)==ZIP_ERRNO)
             err = ZIP_ERRNO;
-		}
+                }
 
     if ((zi->ci.method == Z_DEFLATED) && (!zi->ci.raw))
     {
         int tmp_err = deflateEnd(&zi->ci.stream);
-        if (err == ZIP_OK) 
+        if (err == ZIP_OK)
             err = tmp_err;
         zi->ci.stream_initialised = 0;
     }
@@ -1589,9 +1590,9 @@ extern int ZEXPORT zipCloseFileInZipRaw64 (zipFile file, ZPOS64_T uncompressed_s
     else if((zi->ci.method == Z_BZIP2ED) && (!zi->ci.raw))
     {
       int tmperr = BZ2_bzCompressEnd(&zi->ci.bstream);
-			if (err==ZIP_OK) 
+                        if (err==ZIP_OK)
-				err = tmperr;
+                                err = tmperr;
-			zi->ci.stream_initialised = 0;
+                        zi->ci.stream_initialised = 0;
     }
 #endif
 
@@ -1662,7 +1663,7 @@ extern int ZEXPORT zipCloseFileInZipRaw64 (zipFile file, ZPOS64_T uncompressed_s
       p += 2;
       zip64local_putValue_inmemory(p, datasize, 2); // DataSize
       p += 2;
-      
+
       if(uncompressed_size >= 0xffffffff)
       {
         zip64local_putValue_inmemory(p, uncompressed_size, 8);
@@ -1680,7 +1681,7 @@ extern int ZEXPORT zipCloseFileInZipRaw64 (zipFile file, ZPOS64_T uncompressed_s
         zip64local_putValue_inmemory(p, zi->ci.pos_local_header, 8);
         p += 8;
       }
-      
+
       // Update how much extra free space we got in the memory buffer
       // and increase the centralheader size so the new ZIP64 fields are included
       // ( 4 below is the size of HeaderID and DataSize field )
@@ -1691,7 +1692,7 @@ extern int ZEXPORT zipCloseFileInZipRaw64 (zipFile file, ZPOS64_T uncompressed_s
       zi->ci.size_centralExtra += datasize + 4;
       zip64local_putValue_inmemory(zi->ci.central_header+30,(uLong)zi->ci.size_centralExtra,2);
     }
-    
+
     if (err==ZIP_OK)
         err = add_data_in_datablock(&zi->central_dir, zi->ci.central_header, (uLong)zi->ci.size_centralheader);
 
@@ -1752,9 +1753,9 @@ int Write_Zip64EndOfCentralDirectoryLocator(zip64_internal* zi, ZPOS64_T zip64eo
 {
   int err = ZIP_OK;
   ZPOS64_T pos = zip64eocd_pos_inzip - zi->add_position_when_writting_offset;
-  
+
   err = zip64local_putValue(&zi->z_filefunc,zi->filestream,(uLong)ZIP64ENDLOCHEADERMAGIC,4);
-  
+
   /*num disks*/
     if (err==ZIP_OK) /* number of the disk with the start of the central directory */
       err = zip64local_putValue(&zi->z_filefunc,zi->filestream,(uLong)0,4);
@@ -1807,12 +1808,12 @@ int Write_Zip64EndOfCentralDirectoryRecord(zip64_internal* zi, uLong size_centra
     ZPOS64_T pos = centraldir_pos_inzip - zi->add_position_when_writting_offset;
     err = zip64local_putValue(&zi->z_filefunc,zi->filestream, (ZPOS64_T)pos,8);
   }
-  return err;  
+  return err;
 }
 int Write_EndOfCentralDirectoryRecord(zip64_internal* zi, uLong size_centraldir, ZPOS64_T centraldir_pos_inzip)
 {
   int err = ZIP_OK;
-  
+
   /*signature*/
   err = zip64local_putValue(&zi->z_filefunc,zi->filestream,(uLong)ENDHEADERMAGIC,4);
 
@@ -1851,7 +1852,7 @@ int Write_EndOfCentralDirectoryRecord(zip64_internal* zi, uLong size_centraldir,
       err = zip64local_putValue(&zi->z_filefunc,zi->filestream, (uLong)0xffffffff,4);
     }
     else
-		  err = zip64local_putValue(&zi->z_filefunc,zi->filestream, (uLong)(centraldir_pos_inzip - zi->add_position_when_writting_offset),4);
+                  err = zip64local_putValue(&zi->z_filefunc,zi->filestream, (uLong)(centraldir_pos_inzip - zi->add_position_when_writting_offset),4);
   }
 
    return err;
@@ -1861,7 +1862,7 @@ int Write_GlobalComment(zip64_internal* zi, const char* global_comment)
 {
   int err = ZIP_OK;
   uInt size_global_comment = 0;
-  
+
   if(global_comment != NULL)
     size_global_comment = (uInt)strlen(global_comment);
 
@@ -1897,7 +1898,7 @@ extern int ZEXPORT zipClose (zipFile file, const char* global_comment)
     if (global_comment==NULL)
         global_comment = zi->globalcomment;
 #endif
-  
+
     centraldir_pos_inzip = ZTELL64(zi->z_filefunc,zi->filestream);
 
     if (err==ZIP_OK)
@@ -1922,7 +1923,7 @@ extern int ZEXPORT zipClose (zipFile file, const char* global_comment)
     {
       ZPOS64_T Zip64EOCDpos = ZTELL64(zi->z_filefunc,zi->filestream);
       Write_Zip64EndOfCentralDirectoryRecord(zi, size_centraldir, centraldir_pos_inzip);
-      
+
       Write_Zip64EndOfCentralDirectoryLocator(zi, Zip64EOCDpos);
     }
 
@@ -1977,7 +1978,7 @@ extern int ZEXPORT zipRemoveExtraInfoBlock (char* pData, int* dataLen, short sHe
       p += dataSize + 4;
       size += dataSize + 4;
     }
-        
+
   }
 
   if(size < *dataLen)

contrib/minizip/zip.h

@@ -1,15 +1,15 @@
 /* zip.h -- IO on .zip files using zlib
-   Version 1.1, January 7th, 2010
+   Version 1.1, February 14h, 2010
    part of the MiniZip project - ( http://www.winimage.com/zLibDll/minizip.html )
 
-	 Copyright (C) 1998-2010 Gilles Vollant (minizip) ( http://www.winimage.com/zLibDll/minizip.html )
+         Copyright (C) 1998-2010 Gilles Vollant (minizip) ( http://www.winimage.com/zLibDll/minizip.html )
 
-	 Modifications for Zip64 support
+         Modifications for Zip64 support
-	 Copyright (C) 2009-2010 Mathias Svensson ( http://result42.com )
+         Copyright (C) 2009-2010 Mathias Svensson ( http://result42.com )
 
-	 For more info read MiniZip_info.txt
+         For more info read MiniZip_info.txt
 
-	 ---------------------------------------------------------------------------
+         ---------------------------------------------------------------------------
 
    Condition of use and distribution are the same than zlib :
 
@@ -29,11 +29,11 @@
      misrepresented as being the original software.
   3. This notice may not be removed or altered from any source distribution.
 
-	---------------------------------------------------------------------------
+        ---------------------------------------------------------------------------
 
-	Changes 
+        Changes
 
-	See header of zip.h
+        See header of zip.h
 
 */
 
@@ -338,20 +338,20 @@ extern int ZEXPORT zipClose OF((zipFile file,
 
 
 extern int ZEXPORT zipRemoveExtraInfoBlock OF((char* pData, int* dataLen, short sHeader));
-/* 
+/*
-  zipRemoveExtraInfoBlock -  Added by Mathias Svensson 
+  zipRemoveExtraInfoBlock -  Added by Mathias Svensson
-  
+
   Remove extra information block from a extra information data for the local file header or central directory header
 
   It is needed to remove ZIP64 extra information blocks when before data is written if using RAW mode.
-  
+
   0x0001 is the signature header for the ZIP64 extra information blocks
 
   usage.
-			Remove ZIP64 Extra information from a central director extra field data
+                        Remove ZIP64 Extra information from a central director extra field data
-	      zipRemoveExtraInfoBlock(pCenDirExtraFieldData, &nCenDirExtraFieldDataLen, 0x0001);
+              zipRemoveExtraInfoBlock(pCenDirExtraFieldData, &nCenDirExtraFieldDataLen, 0x0001);
 
-			Remove ZIP64 Extra information from a Local File Header extra field data
+                        Remove ZIP64 Extra information from a Local File Header extra field data
         zipRemoveExtraInfoBlock(pLocalHeaderExtraFieldData, &nLocalHeaderExtraFieldDataLen, 0x0001);
 */
 

contrib/pascal/zlibd32.mak

@@ -18,9 +18,9 @@ LDFLAGS =
 # variables
 ZLIB_LIB = zlib.lib
 
-OBJ1 = adler32.obj compress.obj crc32.obj deflate.obj gzclose.obj gzio.obj gzlib.obj gzread.obj
+OBJ1 = adler32.obj compress.obj crc32.obj deflate.obj gzclose.obj gzlib.obj gzread.obj
 OBJ2 = gzwrite.obj infback.obj inffast.obj inflate.obj inftrees.obj trees.obj uncompr.obj zutil.obj
-OBJP1 = +adler32.obj+compress.obj+crc32.obj+deflate.obj+gzclose.obj+gzio.obj+gzlib.obj+gzread.obj
+OBJP1 = +adler32.obj+compress.obj+crc32.obj+deflate.obj+gzclose.obj+gzlib.obj+gzread.obj
 OBJP2 = +gzwrite.obj+infback.obj+inffast.obj+inflate.obj+inftrees.obj+trees.obj+uncompr.obj+zutil.obj
 
 
@@ -40,8 +40,6 @@ deflate.obj: deflate.c deflate.h zutil.h zlib.h zconf.h
 
 gzclose.obj: gzclose.c zlib.h zconf.h gzguts.h
 
-gzio.obj: gzio.c zutil.h zlib.h zconf.h
-
 gzlib.obj: gzlib.c zlib.h zconf.h gzguts.h
 
 gzread.obj: gzread.c zlib.h zconf.h gzguts.h

contrib/pascal/zlibpas.pas

@@ -10,7 +10,7 @@ unit zlibpas;
 interface
 
 const
-  ZLIB_VERSION = '1.2.3';
+  ZLIB_VERSION = '1.2.5.1';
 
 type
   alloc_func = function(opaque: Pointer; items, size: Integer): Pointer;
@@ -97,6 +97,7 @@ function deflateCopy(var dest, source: z_stream): Integer;
 function deflateReset(var strm: z_stream): Integer;
 function deflateParams(var strm: z_stream; level, strategy: Integer): Integer;
 function deflateBound(var strm: z_stream; sourceLen: LongInt): LongInt;
+function deflatePending(var strm: z_stream; var pending: Integer; var bits: Integer): Integer;
 function deflatePrime(var strm: z_stream; bits, value: Integer): Integer;
 function inflateInit2(var strm: z_stream; windowBits: Integer): Integer;
 function inflateSetDictionary(var strm: z_stream; const dictionary: PChar;
@@ -166,6 +167,7 @@ function deflateEnd; external;
 function deflateInit_; external;
 function deflateInit2_; external;
 function deflateParams; external;
+function deflatePending; external;
 function deflatePrime; external;
 function deflateReset; external;
 function deflateSetDictionary; external;

contrib/puff/Makefile

@@ -1,8 +1,42 @@
-puff: puff.c puff.h
+CFLAGS=-O
-	cc -DTEST -o puff puff.c
+
+puff: puff.o pufftest.o
+
+puff.o: puff.h
+
+pufftest.o: puff.h
 
 test: puff
 	puff zeros.raw
 
+puft: puff.c puff.h pufftest.o
+	cc -fprofile-arcs -ftest-coverage -o puft puff.c pufftest.o
+
+# puff full coverage test (should say 100%)
+cov: puft
+	@rm -f *.gcov *.gcda
+	@puft -w zeros.raw 2>&1 | cat > /dev/null
+	@echo '04' | xxd -r -p | puft 2> /dev/null || test $$? -eq 2
+	@echo '00' | xxd -r -p | puft 2> /dev/null || test $$? -eq 2
+	@echo '00 00 00 00 00' | xxd -r -p | puft 2> /dev/null || test $$? -eq 254
+	@echo '00 01 00 fe ff' | xxd -r -p | puft 2> /dev/null || test $$? -eq 2
+	@echo '01 01 00 fe ff 0a' | xxd -r -p | puft -f 2>&1 | cat > /dev/null
+	@echo '02 7e ff ff' | xxd -r -p | puft 2> /dev/null || test $$? -eq 246
+	@echo '02' | xxd -r -p | puft 2> /dev/null || test $$? -eq 2
+	@echo '04 80 49 92 24 49 92 24 0f b4 ff ff c3 04' | xxd -r -p | puft 2> /dev/null || test $$? -eq 2
+	@echo '04 80 49 92 24 49 92 24 71 ff ff 93 11 00' | xxd -r -p | puft 2> /dev/null || test $$? -eq 249
+	@echo '04 c0 81 08 00 00 00 00 20 7f eb 0b 00 00' | xxd -r -p | puft 2> /dev/null || test $$? -eq 246
+	@echo '0b 00 00' | xxd -r -p | puft -f 2>&1 | cat > /dev/null
+	@echo '1a 07' | xxd -r -p | puft 2> /dev/null || test $$? -eq 246
+	@echo '0c c0 81 00 00 00 00 00 90 ff 6b 04' | xxd -r -p | puft 2> /dev/null || test $$? -eq 245
+	@puft -f zeros.raw 2>&1 | cat > /dev/null
+	@echo 'fc 00 00' | xxd -r -p | puft 2> /dev/null || test $$? -eq 253
+	@echo '04 00 fe ff' | xxd -r -p | puft 2> /dev/null || test $$? -eq 252
+	@echo '04 00 24 49' | xxd -r -p | puft 2> /dev/null || test $$? -eq 251
+	@echo '04 80 49 92 24 49 92 24 0f b4 ff ff c3 84' | xxd -r -p | puft 2> /dev/null || test $$? -eq 248
+	@echo '04 00 24 e9 ff ff' | xxd -r -p | puft 2> /dev/null || test $$? -eq 250
+	@echo '04 00 24 e9 ff 6d' | xxd -r -p | puft 2> /dev/null || test $$? -eq 247
+	@gcov -n puff.c
+
 clean:
-	rm -f puff puff.o
+	rm -f puff puft *.o *.gc*

contrib/puff/puff.c

@@ -1,8 +1,8 @@
 /*
  * puff.c
- * Copyright (C) 2002-2008 Mark Adler
+ * Copyright (C) 2002-2010 Mark Adler
  * For conditions of distribution and use, see copyright notice in puff.h
- * version 2.0, 25 Jul 2008
+ * version 2.2, 25 Apr 2010
  *
  * puff.c is a simple inflate written to be an unambiguous way to specify the
  * deflate format.  It is not written for speed but rather simplicity.  As a
@@ -49,9 +49,9 @@
  *                      - Fix fixed codes table error
  *                      - Provide a scanning mode for determining size of
  *                        uncompressed data
- * 1.3  20 Mar 2002     - Go back to lengths for puff() parameters [Jean-loup]
+ * 1.3  20 Mar 2002     - Go back to lengths for puff() parameters [Gailly]
  *                      - Add a puff.h file for the interface
- *                      - Add braces in puff() for else do [Jean-loup]
+ *                      - Add braces in puff() for else do [Gailly]
  *                      - Use indexes instead of pointers for readability
  * 1.4  31 Mar 2002     - Simplify construct() code set check
  *                      - Fix some comments
@@ -67,13 +67,21 @@
  *                      - Add option in TEST code for puff to write the data
  *                      - Add option in TEST code to skip input bytes
  *                      - Allow TEST code to read from piped stdin
+ * 2.1   4 Apr 2010     - Avoid variable initialization for happier compilers
+ *                      - Avoid unsigned comparisons for even happier compilers
+ * 2.2  25 Apr 2010     - Fix bug in variable initializations [Oberhumer]
+ *                      - Add const where appropriate [Oberhumer]
+ *                      - Split if's and ?'s for coverage testing
+ *                      - Break out test code to separate file
+ *                      - Move NIL to puff.h
+ *                      - Allow incomplete code only if single code length is 1
+ *                      - Add full code coverage test to Makefile
  */
 
 #include <setjmp.h>             /* for setjmp(), longjmp(), and jmp_buf */
 #include "puff.h"               /* prototype for puff() */
 
 #define local static            /* for local function definitions */
-#define NIL ((unsigned char *)0)        /* for no output option */
 
 /*
  * Maximums for allocations and loops.  It is not useful to change these --
@@ -93,7 +101,7 @@ struct state {
     unsigned long outcnt;       /* bytes written to out so far */
 
     /* input state */
-    unsigned char *in;          /* input buffer */
+    const unsigned char *in;    /* input buffer */
     unsigned long inlen;        /* available input at in */
     unsigned long incnt;        /* bytes read so far */
     int bitbuf;                 /* bit buffer */
@@ -121,7 +129,8 @@ local int bits(struct state *s, int need)
     /* load at least need bits into val */
     val = s->bitbuf;
     while (s->bitcnt < need) {
-        if (s->incnt == s->inlen) longjmp(s->env, 1);   /* out of input */
+        if (s->incnt == s->inlen)
+            longjmp(s->env, 1);         /* out of input */
         val |= (long)(s->in[s->incnt++]) << s->bitcnt;  /* load eight bits */
         s->bitcnt += 8;
     }
@@ -160,7 +169,8 @@ local int stored(struct state *s)
     s->bitcnt = 0;
 
     /* get length and check against its one's complement */
-    if (s->incnt + 4 > s->inlen) return 2;      /* not enough input */
+    if (s->incnt + 4 > s->inlen)
+        return 2;                               /* not enough input */
     len = s->in[s->incnt++];
     len |= s->in[s->incnt++] << 8;
     if (s->in[s->incnt++] != (~len & 0xff) ||
@@ -168,7 +178,8 @@ local int stored(struct state *s)
         return -2;                              /* didn't match complement! */
 
     /* copy len bytes from in to out */
-    if (s->incnt + len > s->inlen) return 2;    /* not enough input */
+    if (s->incnt + len > s->inlen)
+        return 2;                               /* not enough input */
     if (s->out != NIL) {
         if (s->outcnt + len > s->outlen)
             return 1;                           /* not enough output space */
@@ -220,7 +231,7 @@ struct huffman {
  *   in the deflate format.  See the format notes for fixed() and dynamic().
  */
 #ifdef SLOW
-local int decode(struct state *s, struct huffman *h)
+local int decode(struct state *s, const struct huffman *h)
 {
     int len;            /* current number of bits in code */
     int code;           /* len bits being decoded */
@@ -248,7 +259,7 @@ local int decode(struct state *s, struct huffman *h)
  * a few percent larger.
  */
 #else /* !SLOW */
-local int decode(struct state *s, struct huffman *h)
+local int decode(struct state *s, const struct huffman *h)
 {
     int len;            /* current number of bits in code */
     int code;           /* len bits being decoded */
@@ -281,10 +292,13 @@ local int decode(struct state *s, struct huffman *h)
             len++;
         }
         left = (MAXBITS+1) - len;
-        if (left == 0) break;
+        if (left == 0)
-        if (s->incnt == s->inlen) longjmp(s->env, 1);   /* out of input */
+            break;
+        if (s->incnt == s->inlen)
+            longjmp(s->env, 1);         /* out of input */
         bitbuf = s->in[s->incnt++];
-        if (left > 8) left = 8;
+        if (left > 8)
+            left = 8;
     }
     return -10;                         /* ran out of codes */
 }
@@ -322,7 +336,7 @@ local int decode(struct state *s, struct huffman *h)
  * - Within a given code length, the symbols are kept in ascending order for
  *   the code bits definition.
  */
-local int construct(struct huffman *h, short *length, int n)
+local int construct(struct huffman *h, const short *length, int n)
 {
     int symbol;         /* current symbol when stepping through length[] */
     int len;            /* current length when stepping through h->count[] */
@@ -342,7 +356,8 @@ local int construct(struct huffman *h, short *length, int n)
     for (len = 1; len <= MAXBITS; len++) {
         left <<= 1;                     /* one more bit, double codes left */
         left -= h->count[len];          /* deduct count from possible codes */
-        if (left < 0) return left;      /* over-subscribed--return negative */
+        if (left < 0)
+            return left;                /* over-subscribed--return negative */
     }                                   /* left > 0 means incomplete */
 
     /* generate offsets into symbol table for each length for sorting */
@@ -418,8 +433,8 @@ local int construct(struct huffman *h, short *length, int n)
  *   defined to do the wrong thing in this case.
  */
 local int codes(struct state *s,
-                struct huffman *lencode,
+                const struct huffman *lencode,
-                struct huffman *distcode)
+                const struct huffman *distcode)
 {
     int symbol;         /* decoded symbol */
     int len;            /* length for copy */
@@ -442,11 +457,13 @@ local int codes(struct state *s,
     /* decode literals and length/distance pairs */
     do {
         symbol = decode(s, lencode);
-        if (symbol < 0) return symbol;  /* invalid symbol */
+        if (symbol < 0)
+            return symbol;              /* invalid symbol */
         if (symbol < 256) {             /* literal: symbol is the byte */
             /* write out the literal */
             if (s->out != NIL) {
-                if (s->outcnt == s->outlen) return 1;
+                if (s->outcnt == s->outlen)
+                    return 1;
                 s->out[s->outcnt] = symbol;
             }
             s->outcnt++;
@@ -454,12 +471,14 @@ local int codes(struct state *s,
         else if (symbol > 256) {        /* length */
             /* get and compute length */
             symbol -= 257;
-            if (symbol >= 29) return -10;       /* invalid fixed code */
+            if (symbol >= 29)
+                return -10;             /* invalid fixed code */
             len = lens[symbol] + bits(s, lext[symbol]);
 
             /* get and check distance */
             symbol = decode(s, distcode);
-            if (symbol < 0) return symbol;      /* invalid symbol */
+            if (symbol < 0)
+                return symbol;          /* invalid symbol */
             dist = dists[symbol] + bits(s, dext[symbol]);
 #ifndef INFLATE_ALLOW_INVALID_DISTANCE_TOOFAR_ARRR
             if (dist > s->outcnt)
@@ -468,13 +487,15 @@ local int codes(struct state *s,
 
             /* copy length bytes from distance bytes back */
             if (s->out != NIL) {
-                if (s->outcnt + len > s->outlen) return 1;
+                if (s->outcnt + len > s->outlen)
+                    return 1;
                 while (len--) {
                     s->out[s->outcnt] =
 #ifdef INFLATE_ALLOW_INVALID_DISTANCE_TOOFAR_ARRR
-                        dist > s->outcnt ? 0 :
+                        dist > s->outcnt ?
+                            0 :
 #endif
-                        s->out[s->outcnt - dist];
+                            s->out[s->outcnt - dist];
                     s->outcnt++;
                 }
             }
@@ -516,14 +537,19 @@ local int fixed(struct state *s)
     static int virgin = 1;
     static short lencnt[MAXBITS+1], lensym[FIXLCODES];
     static short distcnt[MAXBITS+1], distsym[MAXDCODES];
-    static struct huffman lencode = {lencnt, lensym};
+    static struct huffman lencode, distcode;
-    static struct huffman distcode = {distcnt, distsym};
 
     /* build fixed huffman tables if first call (may not be thread safe) */
     if (virgin) {
         int symbol;
         short lengths[FIXLCODES];
 
+        /* construct lencode and distcode */
+        lencode.count = lencnt;
+        lencode.symbol = lensym;
+        distcode.count = distcnt;
+        distcode.symbol = distsym;
+
         /* literal/length table */
         for (symbol = 0; symbol < 144; symbol++)
             lengths[symbol] = 8;
@@ -643,11 +669,16 @@ local int dynamic(struct state *s)
     short lengths[MAXCODES];            /* descriptor code lengths */
     short lencnt[MAXBITS+1], lensym[MAXLCODES];         /* lencode memory */
     short distcnt[MAXBITS+1], distsym[MAXDCODES];       /* distcode memory */
-    struct huffman lencode = {lencnt, lensym};          /* length code */
+    struct huffman lencode, distcode;   /* length and distance codes */
-    struct huffman distcode = {distcnt, distsym};       /* distance code */
     static const short order[19] =      /* permutation of code length codes */
         {16, 17, 18, 0, 8, 7, 9, 6, 10, 5, 11, 4, 12, 3, 13, 2, 14, 1, 15};
 
+    /* construct lencode and distcode */
+    lencode.count = lencnt;
+    lencode.symbol = lensym;
+    distcode.count = distcnt;
+    distcode.symbol = distsym;
+
     /* get number of lengths in each table, check lengths */
     nlen = bits(s, 5) + 257;
     ndist = bits(s, 5) + 1;
@@ -663,7 +694,8 @@ local int dynamic(struct state *s)
 
     /* build huffman table for code lengths codes (use lencode temporarily) */
     err = construct(&lencode, lengths, 19);
-    if (err != 0) return -4;            /* require complete code set here */
+    if (err != 0)               /* require complete code set here */
+        return -4;
 
     /* read length/literal and distance code length tables */
     index = 0;
@@ -677,7 +709,8 @@ local int dynamic(struct state *s)
         else {                          /* repeat instruction */
             len = 0;                    /* assume repeating zeros */
             if (symbol == 16) {         /* repeat last length 3..6 times */
-                if (index == 0) return -5;      /* no last length! */
+                if (index == 0)
+                    return -5;          /* no last length! */
                 len = lengths[index - 1];       /* last length */
                 symbol = 3 + bits(s, 2);
             }
@@ -698,13 +731,13 @@ local int dynamic(struct state *s)
 
     /* build huffman table for literal/length codes */
     err = construct(&lencode, lengths, nlen);
-    if (err < 0 || (err > 0 && nlen - lencode.count[0] != 1))
+    if (err && (err < 0 || nlen != lencode.count[0] + lencode.count[1]))
-        return -7;      /* only allow incomplete codes if just one code */
+        return -7;      /* incomplete code ok only for single length 1 code */
 
     /* build huffman table for distance codes */
     err = construct(&distcode, lengths + nlen, ndist);
-    if (err < 0 || (err > 0 && ndist - distcode.count[0] != 1))
+    if (err && (err < 0 || ndist != distcode.count[0] + distcode.count[1]))
-        return -8;      /* only allow incomplete codes if just one code */
+        return -8;      /* incomplete code ok only for single length 1 code */
 
     /* decode data until end-of-block code */
     return codes(s, &lencode, &distcode);
@@ -756,7 +789,7 @@ local int dynamic(struct state *s)
  */
 int puff(unsigned char *dest,           /* pointer to destination pointer */
          unsigned long *destlen,        /* amount of output space */
-         unsigned char *source,         /* pointer to source data pointer */
+         const unsigned char *source,   /* pointer to source data pointer */
          unsigned long *sourcelen)      /* amount of input available */
 {
     struct state s;             /* input/output state */
@@ -783,11 +816,15 @@ int puff(unsigned char *dest,           /* pointer to destination pointer */
         do {
             last = bits(&s, 1);         /* one if last block */
             type = bits(&s, 2);         /* block type 0..3 */
-            err = type == 0 ? stored(&s) :
+            err = type == 0 ?
-                  (type == 1 ? fixed(&s) :
+                    stored(&s) :
-                   (type == 2 ? dynamic(&s) :
+                    (type == 1 ?
-                    -1));               /* type == 3, invalid */
+                        fixed(&s) :
-            if (err != 0) break;        /* return with error */
+                        (type == 2 ?
+                            dynamic(&s) :
+                            -1));       /* type == 3, invalid */
+            if (err != 0)
+                break;                  /* return with error */
         } while (!last);
     }
 
@@ -798,145 +835,3 @@ int puff(unsigned char *dest,           /* pointer to destination pointer */
     }
     return err;
 }
-
-#ifdef TEST
-/* Examples of how to use puff().
-
-   Usage: puff [-w] [-nnn] file
-          ... | puff [-w] [-nnn]
-
-   where file is the input file with deflate data, nnn is the number of bytes
-   of input to skip before inflating (e.g. to skip a zlib or gzip header), and
-   -w is used to write the decompressed data to stdout */
-
-#include <stdio.h>
-#include <stdlib.h>
-
-/* Return size times approximately the cube root of 2, keeping the result as 1,
-   3, or 5 times a power of 2 -- the result is always > size, until the result
-   is the maximum value of an unsigned long, where it remains.  This is useful
-   to keep reallocations less than ~33% over the actual data. */
-local size_t bythirds(size_t size)
-{
-    int n;
-    size_t m;
-
-    m = size;
-    for (n = 0; m; n++)
-        m >>= 1;
-    if (n < 3)
-        return size + 1;
-    n -= 3;
-    m = size >> n;
-    m += m == 6 ? 2 : 1;
-    m <<= n;
-    return m > size ? m : (size_t)(-1);
-}
-
-/* Read the input file *name, or stdin if name is NULL, into allocated memory.
-   Reallocate to larger buffers until the entire file is read in.  Return a
-   pointer to the allocated data, or NULL if there was a memory allocation
-   failure.  *len is the number of bytes of data read from the input file (even
-   if load() returns NULL).  If the input file was empty or could not be opened
-   or read, *len is zero. */
-local void *load(char *name, size_t *len)
-{
-    size_t size;
-    void *buf, *swap;
-    FILE *in;
-
-    *len = 0;
-    buf = malloc(size = 4096);
-    if (buf == NULL)
-        return NULL;
-    in = name == NULL ? stdin : fopen(name, "rb");
-    if (in != NULL) {
-        for (;;) {
-            *len += fread((char *)buf + *len, 1, size - *len, in);
-            if (*len < size) break;
-            size = bythirds(size);
-            if (size == *len || (swap = realloc(buf, size)) == NULL) {
-                free(buf);
-                buf = NULL;
-                break;
-            }
-            buf = swap;
-        }
-        fclose(in);
-    }
-    return buf;
-}
-
-int main(int argc, char **argv)
-{
-    int ret, skip = 0, put = 0;
-    char *arg, *name = NULL;
-    unsigned char *source = NULL, *dest;
-    size_t len = 0;
-    unsigned long sourcelen, destlen;
-
-    /* process arguments */
-    while (arg = *++argv, --argc)
-        if (arg[0] == '-') {
-            if (arg[1] == 'w' && arg[2] == 0)
-                put = 1;
-            else if (arg[1] >= '0' && arg[1] <= '9')
-                skip = atoi(arg + 1);
-            else {
-                fprintf(stderr, "invalid option %s\n", arg);
-                return 3;
-            }
-        }
-        else if (name != NULL) {
-            fprintf(stderr, "only one file name allowed\n");
-            return 3;
-        }
-        else
-            name = arg;
-    source = load(name, &len);
-    if (source == NULL) {
-        fprintf(stderr, "memory allocation failure\n");
-        return 4;
-    }
-    if (len == 0) {
-        fprintf(stderr, "could not read %s, or it was empty\n",
-                name == NULL ? "<stdin>" : name);
-        free(source);
-        return 3;
-    }
-    if (skip >= len) {
-        fprintf(stderr, "skip request of %d leaves no input\n", skip);
-        free(source);
-        return 3;
-    }
-
-    /* test inflate data with offset skip */
-    len -= skip;
-    sourcelen = (unsigned long)len;
-    ret = puff(NIL, &destlen, source + skip, &sourcelen);
-    if (ret)
-        fprintf(stderr, "puff() failed with return code %d\n", ret);
-    else {
-        fprintf(stderr, "puff() succeeded uncompressing %lu bytes\n", destlen);
-        if (sourcelen < len) fprintf(stderr, "%lu compressed bytes unused\n",
-                                     len - sourcelen);
-    }
-
-    /* if requested, inflate again and write decompressd data to stdout */
-    if (put) {
-        dest = malloc(destlen);
-        if (dest == NULL) {
-            fprintf(stderr, "memory allocation failure\n");
-            free(source);
-            return 4;
-        }
-        puff(dest, &destlen, source + skip, &sourcelen);
-        fwrite(dest, 1, destlen, stdout);
-        free(dest);
-    }
-
-    /* clean up */
-    free(source);
-    return ret;
-}
-#endif

contrib/puff/puff.h

@@ -1,6 +1,6 @@
 /* puff.h
-  Copyright (C) 2002-2008 Mark Adler, all rights reserved
+  Copyright (C) 2002-2010 Mark Adler, all rights reserved
-  version 1.9, 10 Jan 2008
+  version 2.2, 25 Apr 2010
 
   This software is provided 'as-is', without any express or implied
   warranty.  In no event will the author be held liable for any damages
@@ -25,7 +25,11 @@
 /*
  * See puff.c for purpose and usage.
  */
+#ifndef NIL
+#  define NIL ((unsigned char *)0)      /* for no output option */
+#endif
+
 int puff(unsigned char *dest,           /* pointer to destination pointer */
          unsigned long *destlen,        /* amount of output space */
-         unsigned char *source,         /* pointer to source data pointer */
+         const unsigned char *source,   /* pointer to source data pointer */
          unsigned long *sourcelen);     /* amount of input available */

contrib/puff/pufftest.c

@@ -0,0 +1,165 @@
+/*
+ * pufftest.c
+ * Copyright (C) 2002-2010 Mark Adler
+ * For conditions of distribution and use, see copyright notice in puff.h
+ * version 2.2, 25 Apr 2010
+ */
+
+/* Example of how to use puff().
+
+   Usage: puff [-w] [-f] [-nnn] file
+          ... | puff [-w] [-f] [-nnn]
+
+   where file is the input file with deflate data, nnn is the number of bytes
+   of input to skip before inflating (e.g. to skip a zlib or gzip header), and
+   -w is used to write the decompressed data to stdout.  -f is for coverage
+   testing, and causes pufftest to fail with not enough output space (-f does
+   a write like -w, so -w is not required). */
+
+#include <stdio.h>
+#include <stdlib.h>
+#include "puff.h"
+
+#if defined(MSDOS) || defined(OS2) || defined(WIN32) || defined(__CYGWIN__)
+#  include <fcntl.h>
+#  include <io.h>
+#  define SET_BINARY_MODE(file) setmode(fileno(file), O_BINARY)
+#else
+#  define SET_BINARY_MODE(file)
+#endif
+
+#define local static
+
+/* Return size times approximately the cube root of 2, keeping the result as 1,
+   3, or 5 times a power of 2 -- the result is always > size, until the result
+   is the maximum value of an unsigned long, where it remains.  This is useful
+   to keep reallocations less than ~33% over the actual data. */
+local size_t bythirds(size_t size)
+{
+    int n;
+    size_t m;
+
+    m = size;
+    for (n = 0; m; n++)
+        m >>= 1;
+    if (n < 3)
+        return size + 1;
+    n -= 3;
+    m = size >> n;
+    m += m == 6 ? 2 : 1;
+    m <<= n;
+    return m > size ? m : (size_t)(-1);
+}
+
+/* Read the input file *name, or stdin if name is NULL, into allocated memory.
+   Reallocate to larger buffers until the entire file is read in.  Return a
+   pointer to the allocated data, or NULL if there was a memory allocation
+   failure.  *len is the number of bytes of data read from the input file (even
+   if load() returns NULL).  If the input file was empty or could not be opened
+   or read, *len is zero. */
+local void *load(const char *name, size_t *len)
+{
+    size_t size;
+    void *buf, *swap;
+    FILE *in;
+
+    *len = 0;
+    buf = malloc(size = 4096);
+    if (buf == NULL)
+        return NULL;
+    in = name == NULL ? stdin : fopen(name, "rb");
+    if (in != NULL) {
+        for (;;) {
+            *len += fread((char *)buf + *len, 1, size - *len, in);
+            if (*len < size) break;
+            size = bythirds(size);
+            if (size == *len || (swap = realloc(buf, size)) == NULL) {
+                free(buf);
+                buf = NULL;
+                break;
+            }
+            buf = swap;
+        }
+        fclose(in);
+    }
+    return buf;
+}
+
+int main(int argc, char **argv)
+{
+    int ret, put = 0, fail = 0;
+    unsigned skip = 0;
+    char *arg, *name = NULL;
+    unsigned char *source = NULL, *dest;
+    size_t len = 0;
+    unsigned long sourcelen, destlen;
+
+    /* process arguments */
+    while (arg = *++argv, --argc)
+        if (arg[0] == '-') {
+            if (arg[1] == 'w' && arg[2] == 0)
+                put = 1;
+            else if (arg[1] == 'f' && arg[2] == 0)
+                fail = 1, put = 1;
+            else if (arg[1] >= '0' && arg[1] <= '9')
+                skip = (unsigned)atoi(arg + 1);
+            else {
+                fprintf(stderr, "invalid option %s\n", arg);
+                return 3;
+            }
+        }
+        else if (name != NULL) {
+            fprintf(stderr, "only one file name allowed\n");
+            return 3;
+        }
+        else
+            name = arg;
+    source = load(name, &len);
+    if (source == NULL) {
+        fprintf(stderr, "memory allocation failure\n");
+        return 4;
+    }
+    if (len == 0) {
+        fprintf(stderr, "could not read %s, or it was empty\n",
+                name == NULL ? "<stdin>" : name);
+        free(source);
+        return 3;
+    }
+    if (skip >= len) {
+        fprintf(stderr, "skip request of %d leaves no input\n", skip);
+        free(source);
+        return 3;
+    }
+
+    /* test inflate data with offset skip */
+    len -= skip;
+    sourcelen = (unsigned long)len;
+    ret = puff(NIL, &destlen, source + skip, &sourcelen);
+    if (ret)
+        fprintf(stderr, "puff() failed with return code %d\n", ret);
+    else {
+        fprintf(stderr, "puff() succeeded uncompressing %lu bytes\n", destlen);
+        if (sourcelen < len) fprintf(stderr, "%lu compressed bytes unused\n",
+                                     len - sourcelen);
+    }
+
+    /* if requested, inflate again and write decompressd data to stdout */
+    if (put && ret == 0) {
+        if (fail)
+            destlen >>= 1;
+        dest = malloc(destlen);
+        if (dest == NULL) {
+            fprintf(stderr, "memory allocation failure\n");
+            free(source);
+            return 4;
+        }
+        puff(dest, &destlen, source + skip, &sourcelen);
+        SET_BINARY_MODE(stdout);
+        fwrite(dest, 1, destlen, stdout);
+        free(dest);
+    }
+
+    /* clean up */
+    free(source);
+    return ret;
+}

contrib/testzlib/testzlib.c

@@ -103,12 +103,12 @@ DWORD GetMsecSincePerfCounter(LARGE_INTEGER beginTime64,BOOL fComputeTimeQueryPe
         MyDoMinus64(&ticks,endTime64,beginTime64);
         QueryPerformanceFrequency(&ticksPerSecond);
 
-    
+
         {
             ticksShifted = Int64ShrlMod32(*(DWORDLONG*)&ticks,dwLog);
             tickSecShifted = Int64ShrlMod32(*(DWORDLONG*)&ticksPerSecond,dwLog);
-        
+
-        } 
+        }
 
         dwRet = (DWORD)((((DWORD)ticksShifted)*1000)/(DWORD)(tickSecShifted));
         dwRet *=1;

contrib/vstudio/readme.txt

@@ -1,8 +1,8 @@
-Building instructions for the DLL versions of Zlib 1.2.3
+Building instructions for the DLL versions of Zlib 1.2.4
 ========================================================
 
 This directory contains projects that build zlib and minizip using
-Microsoft Visual C++ 7.0/7.1, and Visual C++ .
+Microsoft Visual C++ 9.0/10.0, and Visual C++ .
 
 You don't need to build these projects yourself. You can download the
 binaries from:
@@ -10,36 +10,23 @@ binaries from:
 
 More information can be found at this site.
 
+first compile assembly code by running
+bld_ml64.bat in contrib\masmx64
+bld_ml32.bat in contrib\masmx86
 
-Build instructions for Visual Studio 7.x (32 bits)
---------------------------------------------------
-- Uncompress current zlib, including all contrib/* files
-- Download the crtdll library from
-    http://www.winimage.com/zLibDll/crtdll.zip
-  Unzip crtdll.zip to extract crtdll.lib on contrib\vstudio\vc7.
-- Open contrib\vstudio\vc7\zlibvc.sln with Microsoft Visual C++ 7.x
-  (Visual Studio .Net 2002 or 2003).
 
-Build instructions for Visual Studio 2005 (32 bits or 64 bits)
+
+
+Build instructions for Visual Studio 2008 (32 bits or 64 bits)
 --------------------------------------------------------------
 - Uncompress current zlib, including all contrib/* files
-- For 32 bits only: download the crtdll library from
+- Open contrib\vstudio\vc9\zlibvc.sln with Microsoft Visual C++ 2008.0
-    http://www.winimage.com/zLibDll/crtdll.zip
+- Or run: vcbuild /rebuild contrib\vstudio\vc9\zlibvc.sln "Release|Win32"
-  Unzip crtdll.zip to extract crtdll.lib on contrib\vstudio\vc8.
-- Open contrib\vstudio\vc8\zlibvc.sln with Microsoft Visual C++ 8.0
-
-Build instructions for Visual Studio 2005 64 bits, PSDK compiler
-----------------------------------------------------------------
-at the time of writing this text file, Visual Studio 2005 (and 
-  Microsoft Visual C++ 8.0) is on the beta 2 stage.
-Using you can get the free 64 bits compiler from Platform SDK, 
-  which is NOT a beta, and compile using the Visual studio 2005 IDE
-see http://www.winimage.com/misc/sdk64onvs2005/ for instruction
 
+Build instructions for Visual Studio 2010 (32 bits or 64 bits)
+--------------------------------------------------------------
 - Uncompress current zlib, including all contrib/* files
-- start Visual Studio 2005 from a platform SDK command prompt, using
+- Open contrib\vstudio\vc10\zlibvc.sln with Microsoft Visual C++ 2010.0
-  the /useenv switch
-- Open contrib\vstudio\vc8\zlibvc.sln with Microsoft Visual C++ 8.0
 
 
 Important

contrib/vstudio/vc10/miniunz.vcxproj

@@ -0,0 +1,310 @@
+<?xml version="1.0" encoding="utf-8"?>
+<Project DefaultTargets="Build" ToolsVersion="4.0" xmlns="http://schemas.microsoft.com/developer/msbuild/2003">
+  <ItemGroup Label="ProjectConfigurations">
+    <ProjectConfiguration Include="Debug|Itanium">
+      <Configuration>Debug</Configuration>
+      <Platform>Itanium</Platform>
+    </ProjectConfiguration>
+    <ProjectConfiguration Include="Debug|Win32">
+      <Configuration>Debug</Configuration>
+      <Platform>Win32</Platform>
+    </ProjectConfiguration>
+    <ProjectConfiguration Include="Debug|x64">
+      <Configuration>Debug</Configuration>
+      <Platform>x64</Platform>
+    </ProjectConfiguration>
+    <ProjectConfiguration Include="Release|Itanium">
+      <Configuration>Release</Configuration>
+      <Platform>Itanium</Platform>
+    </ProjectConfiguration>
+    <ProjectConfiguration Include="Release|Win32">
+      <Configuration>Release</Configuration>
+      <Platform>Win32</Platform>
+    </ProjectConfiguration>
+    <ProjectConfiguration Include="Release|x64">
+      <Configuration>Release</Configuration>
+      <Platform>x64</Platform>
+    </ProjectConfiguration>
+  </ItemGroup>
+  <PropertyGroup Label="Globals">
+    <ProjectGuid>{C52F9E7B-498A-42BE-8DB4-85A15694382A}</ProjectGuid>
+    <Keyword>Win32Proj</Keyword>
+  </PropertyGroup>
+  <Import Project="$(VCTargetsPath)\Microsoft.Cpp.Default.props" />
+  <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Release|Win32'" Label="Configuration">
+    <ConfigurationType>Application</ConfigurationType>
+    <CharacterSet>MultiByte</CharacterSet>
+  </PropertyGroup>
+  <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'" Label="Configuration">
+    <ConfigurationType>Application</ConfigurationType>
+    <CharacterSet>MultiByte</CharacterSet>
+  </PropertyGroup>
+  <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Release|Itanium'" Label="Configuration">
+    <ConfigurationType>Application</ConfigurationType>
+    <CharacterSet>MultiByte</CharacterSet>
+  </PropertyGroup>
+  <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Debug|Itanium'" Label="Configuration">
+    <ConfigurationType>Application</ConfigurationType>
+    <CharacterSet>MultiByte</CharacterSet>
+  </PropertyGroup>
+  <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Release|x64'" Label="Configuration">
+    <ConfigurationType>Application</ConfigurationType>
+    <CharacterSet>MultiByte</CharacterSet>
+  </PropertyGroup>
+  <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Debug|x64'" Label="Configuration">
+    <ConfigurationType>Application</ConfigurationType>
+    <CharacterSet>MultiByte</CharacterSet>
+  </PropertyGroup>
+  <Import Project="$(VCTargetsPath)\Microsoft.Cpp.props" />
+  <ImportGroup Label="ExtensionSettings">
+  </ImportGroup>
+  <ImportGroup Condition="'$(Configuration)|$(Platform)'=='Release|Win32'" Label="PropertySheets">
+    <Import Project="$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props" Condition="exists('$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props')" Label="LocalAppDataPlatform" />
+  </ImportGroup>
+  <ImportGroup Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'" Label="PropertySheets">
+    <Import Project="$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props" Condition="exists('$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props')" Label="LocalAppDataPlatform" />
+  </ImportGroup>
+  <ImportGroup Condition="'$(Configuration)|$(Platform)'=='Release|Itanium'" Label="PropertySheets">
+    <Import Project="$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props" Condition="exists('$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props')" Label="LocalAppDataPlatform" />
+  </ImportGroup>
+  <ImportGroup Condition="'$(Configuration)|$(Platform)'=='Debug|Itanium'" Label="PropertySheets">
+    <Import Project="$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props" Condition="exists('$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props')" Label="LocalAppDataPlatform" />
+  </ImportGroup>
+  <ImportGroup Condition="'$(Configuration)|$(Platform)'=='Release|x64'" Label="PropertySheets">
+    <Import Project="$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props" Condition="exists('$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props')" Label="LocalAppDataPlatform" />
+  </ImportGroup>
+  <ImportGroup Condition="'$(Configuration)|$(Platform)'=='Debug|x64'" Label="PropertySheets">
+    <Import Project="$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props" Condition="exists('$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props')" Label="LocalAppDataPlatform" />
+  </ImportGroup>
+  <PropertyGroup Label="UserMacros" />
+  <PropertyGroup>
+    <_ProjectFileVersion>10.0.30128.1</_ProjectFileVersion>
+    <OutDir Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'">x86\MiniUnzip$(Configuration)\</OutDir>
+    <IntDir Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'">x86\MiniUnzip$(Configuration)\Tmp\</IntDir>
+    <LinkIncremental Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'">true</LinkIncremental>
+    <GenerateManifest Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'">false</GenerateManifest>
+    <OutDir Condition="'$(Configuration)|$(Platform)'=='Release|Win32'">x86\MiniUnzip$(Configuration)\</OutDir>
+    <IntDir Condition="'$(Configuration)|$(Platform)'=='Release|Win32'">x86\MiniUnzip$(Configuration)\Tmp\</IntDir>
+    <LinkIncremental Condition="'$(Configuration)|$(Platform)'=='Release|Win32'">false</LinkIncremental>
+    <GenerateManifest Condition="'$(Configuration)|$(Platform)'=='Release|Win32'">false</GenerateManifest>
+    <OutDir Condition="'$(Configuration)|$(Platform)'=='Debug|x64'">x64\MiniUnzip$(Configuration)\</OutDir>
+    <IntDir Condition="'$(Configuration)|$(Platform)'=='Debug|x64'">x64\MiniUnzip$(Configuration)\Tmp\</IntDir>
+    <LinkIncremental Condition="'$(Configuration)|$(Platform)'=='Debug|x64'">true</LinkIncremental>
+    <GenerateManifest Condition="'$(Configuration)|$(Platform)'=='Debug|x64'">false</GenerateManifest>
+    <OutDir Condition="'$(Configuration)|$(Platform)'=='Debug|Itanium'">ia64\MiniUnzip$(Configuration)\</OutDir>
+    <IntDir Condition="'$(Configuration)|$(Platform)'=='Debug|Itanium'">ia64\MiniUnzip$(Configuration)\Tmp\</IntDir>
+    <LinkIncremental Condition="'$(Configuration)|$(Platform)'=='Debug|Itanium'">true</LinkIncremental>
+    <GenerateManifest Condition="'$(Configuration)|$(Platform)'=='Debug|Itanium'">false</GenerateManifest>
+    <OutDir Condition="'$(Configuration)|$(Platform)'=='Release|x64'">x64\MiniUnzip$(Configuration)\</OutDir>
+    <IntDir Condition="'$(Configuration)|$(Platform)'=='Release|x64'">x64\MiniUnzip$(Configuration)\Tmp\</IntDir>
+    <LinkIncremental Condition="'$(Configuration)|$(Platform)'=='Release|x64'">false</LinkIncremental>
+    <GenerateManifest Condition="'$(Configuration)|$(Platform)'=='Release|x64'">false</GenerateManifest>
+    <OutDir Condition="'$(Configuration)|$(Platform)'=='Release|Itanium'">ia64\MiniUnzip$(Configuration)\</OutDir>
+    <IntDir Condition="'$(Configuration)|$(Platform)'=='Release|Itanium'">ia64\MiniUnzip$(Configuration)\Tmp\</IntDir>
+    <LinkIncremental Condition="'$(Configuration)|$(Platform)'=='Release|Itanium'">false</LinkIncremental>
+    <GenerateManifest Condition="'$(Configuration)|$(Platform)'=='Release|Itanium'">false</GenerateManifest>
+    <CodeAnalysisRuleSet Condition="'$(Configuration)|$(Platform)'=='Debug|Itanium'">AllRules.ruleset</CodeAnalysisRuleSet>
+    <CodeAnalysisRules Condition="'$(Configuration)|$(Platform)'=='Debug|Itanium'" />
+    <CodeAnalysisRuleAssemblies Condition="'$(Configuration)|$(Platform)'=='Debug|Itanium'" />
+    <CodeAnalysisRuleSet Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'">AllRules.ruleset</CodeAnalysisRuleSet>
+    <CodeAnalysisRules Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'" />
+    <CodeAnalysisRuleAssemblies Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'" />
+    <CodeAnalysisRuleSet Condition="'$(Configuration)|$(Platform)'=='Debug|x64'">AllRules.ruleset</CodeAnalysisRuleSet>
+    <CodeAnalysisRules Condition="'$(Configuration)|$(Platform)'=='Debug|x64'" />
+    <CodeAnalysisRuleAssemblies Condition="'$(Configuration)|$(Platform)'=='Debug|x64'" />
+    <CodeAnalysisRuleSet Condition="'$(Configuration)|$(Platform)'=='Release|Itanium'">AllRules.ruleset</CodeAnalysisRuleSet>
+    <CodeAnalysisRules Condition="'$(Configuration)|$(Platform)'=='Release|Itanium'" />
+    <CodeAnalysisRuleAssemblies Condition="'$(Configuration)|$(Platform)'=='Release|Itanium'" />
+    <CodeAnalysisRuleSet Condition="'$(Configuration)|$(Platform)'=='Release|Win32'">AllRules.ruleset</CodeAnalysisRuleSet>
+    <CodeAnalysisRules Condition="'$(Configuration)|$(Platform)'=='Release|Win32'" />
+    <CodeAnalysisRuleAssemblies Condition="'$(Configuration)|$(Platform)'=='Release|Win32'" />
+    <CodeAnalysisRuleSet Condition="'$(Configuration)|$(Platform)'=='Release|x64'">AllRules.ruleset</CodeAnalysisRuleSet>
+    <CodeAnalysisRules Condition="'$(Configuration)|$(Platform)'=='Release|x64'" />
+    <CodeAnalysisRuleAssemblies Condition="'$(Configuration)|$(Platform)'=='Release|x64'" />
+  </PropertyGroup>
+  <ItemDefinitionGroup Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'">
+    <ClCompile>
+      <Optimization>Disabled</Optimization>
+      <AdditionalIncludeDirectories>..\..\..;..\..\minizip;%(AdditionalIncludeDirectories)</AdditionalIncludeDirectories>
+      <PreprocessorDefinitions>WIN32;_CRT_NONSTDC_NO_DEPRECATE;_CRT_SECURE_NO_DEPRECATE;ZLIB_WINAPI;_DEBUG;_CONSOLE;%(PreprocessorDefinitions)</PreprocessorDefinitions>
+      <MinimalRebuild>true</MinimalRebuild>
+      <BasicRuntimeChecks>Default</BasicRuntimeChecks>
+      <RuntimeLibrary>MultiThreadedDebug</RuntimeLibrary>
+      <BufferSecurityCheck>false</BufferSecurityCheck>
+      <PrecompiledHeader>
+      </PrecompiledHeader>
+      <AssemblerListingLocation>$(IntDir)</AssemblerListingLocation>
+      <WarningLevel>Level3</WarningLevel>
+      <DebugInformationFormat>EditAndContinue</DebugInformationFormat>
+    </ClCompile>
+    <Link>
+      <AdditionalDependencies>x86\ZlibDllDebug\zlibwapi.lib;%(AdditionalDependencies)</AdditionalDependencies>
+      <OutputFile>$(OutDir)miniunz.exe</OutputFile>
+      <GenerateDebugInformation>true</GenerateDebugInformation>
+      <ProgramDatabaseFile>$(OutDir)miniunz.pdb</ProgramDatabaseFile>
+      <SubSystem>Console</SubSystem>
+      <RandomizedBaseAddress>false</RandomizedBaseAddress>
+      <DataExecutionPrevention>
+      </DataExecutionPrevention>
+      <TargetMachine>MachineX86</TargetMachine>
+    </Link>
+  </ItemDefinitionGroup>
+  <ItemDefinitionGroup Condition="'$(Configuration)|$(Platform)'=='Release|Win32'">
+    <ClCompile>
+      <Optimization>MaxSpeed</Optimization>
+      <InlineFunctionExpansion>OnlyExplicitInline</InlineFunctionExpansion>
+      <OmitFramePointers>true</OmitFramePointers>
+      <AdditionalIncludeDirectories>..\..\..;..\..\minizip;%(AdditionalIncludeDirectories)</AdditionalIncludeDirectories>
+      <PreprocessorDefinitions>WIN32;_CRT_NONSTDC_NO_DEPRECATE;_CRT_SECURE_NO_DEPRECATE;ZLIB_WINAPI;NDEBUG;_CONSOLE;%(PreprocessorDefinitions)</PreprocessorDefinitions>
+      <StringPooling>true</StringPooling>
+      <BasicRuntimeChecks>Default</BasicRuntimeChecks>
+      <RuntimeLibrary>MultiThreaded</RuntimeLibrary>
+      <BufferSecurityCheck>false</BufferSecurityCheck>
+      <FunctionLevelLinking>true</FunctionLevelLinking>
+      <PrecompiledHeader>
+      </PrecompiledHeader>
+      <AssemblerListingLocation>$(IntDir)</AssemblerListingLocation>
+      <WarningLevel>Level3</WarningLevel>
+      <DebugInformationFormat>ProgramDatabase</DebugInformationFormat>
+    </ClCompile>
+    <Link>
+      <AdditionalDependencies>x86\ZlibDllRelease\zlibwapi.lib;%(AdditionalDependencies)</AdditionalDependencies>
+      <OutputFile>$(OutDir)miniunz.exe</OutputFile>
+      <GenerateDebugInformation>true</GenerateDebugInformation>
+      <SubSystem>Console</SubSystem>
+      <OptimizeReferences>true</OptimizeReferences>
+      <EnableCOMDATFolding>true</EnableCOMDATFolding>
+      <RandomizedBaseAddress>false</RandomizedBaseAddress>
+      <DataExecutionPrevention>
+      </DataExecutionPrevention>
+      <TargetMachine>MachineX86</TargetMachine>
+    </Link>
+  </ItemDefinitionGroup>
+  <ItemDefinitionGroup Condition="'$(Configuration)|$(Platform)'=='Debug|x64'">
+    <Midl>
+      <TargetEnvironment>X64</TargetEnvironment>
+    </Midl>
+    <ClCompile>
+      <Optimization>Disabled</Optimization>
+      <AdditionalIncludeDirectories>..\..\..;..\..\minizip;%(AdditionalIncludeDirectories)</AdditionalIncludeDirectories>
+      <PreprocessorDefinitions>_CRT_NONSTDC_NO_DEPRECATE;_CRT_SECURE_NO_DEPRECATE;ZLIB_WINAPI;_DEBUG;_CONSOLE;WIN64;%(PreprocessorDefinitions)</PreprocessorDefinitions>
+      <MinimalRebuild>true</MinimalRebuild>
+      <BasicRuntimeChecks>Default</BasicRuntimeChecks>
+      <RuntimeLibrary>MultiThreadedDebugDLL</RuntimeLibrary>
+      <BufferSecurityCheck>false</BufferSecurityCheck>
+      <PrecompiledHeader>
+      </PrecompiledHeader>
+      <AssemblerListingLocation>$(IntDir)</AssemblerListingLocation>
+      <WarningLevel>Level3</WarningLevel>
+      <DebugInformationFormat>ProgramDatabase</DebugInformationFormat>
+    </ClCompile>
+    <Link>
+      <AdditionalDependencies>x64\ZlibDllDebug\zlibwapi.lib;%(AdditionalDependencies)</AdditionalDependencies>
+      <OutputFile>$(OutDir)miniunz.exe</OutputFile>
+      <GenerateDebugInformation>true</GenerateDebugInformation>
+      <ProgramDatabaseFile>$(OutDir)miniunz.pdb</ProgramDatabaseFile>
+      <SubSystem>Console</SubSystem>
+      <TargetMachine>MachineX64</TargetMachine>
+    </Link>
+  </ItemDefinitionGroup>
+  <ItemDefinitionGroup Condition="'$(Configuration)|$(Platform)'=='Debug|Itanium'">
+    <Midl>
+      <TargetEnvironment>Itanium</TargetEnvironment>
+    </Midl>
+    <ClCompile>
+      <Optimization>Disabled</Optimization>
+      <AdditionalIncludeDirectories>..\..\..;..\..\minizip;%(AdditionalIncludeDirectories)</AdditionalIncludeDirectories>
+      <PreprocessorDefinitions>_CRT_NONSTDC_NO_DEPRECATE;_CRT_SECURE_NO_DEPRECATE;ZLIB_WINAPI;_DEBUG;_CONSOLE;WIN64;%(PreprocessorDefinitions)</PreprocessorDefinitions>
+      <MinimalRebuild>true</MinimalRebuild>
+      <BasicRuntimeChecks>Default</BasicRuntimeChecks>
+      <RuntimeLibrary>MultiThreadedDebugDLL</RuntimeLibrary>
+      <BufferSecurityCheck>false</BufferSecurityCheck>
+      <PrecompiledHeader>
+      </PrecompiledHeader>
+      <AssemblerListingLocation>$(IntDir)</AssemblerListingLocation>
+      <WarningLevel>Level3</WarningLevel>
+      <DebugInformationFormat>ProgramDatabase</DebugInformationFormat>
+    </ClCompile>
+    <Link>
+      <AdditionalDependencies>ia64\ZlibDllDebug\zlibwapi.lib;%(AdditionalDependencies)</AdditionalDependencies>
+      <OutputFile>$(OutDir)miniunz.exe</OutputFile>
+      <GenerateDebugInformation>true</GenerateDebugInformation>
+      <ProgramDatabaseFile>$(OutDir)miniunz.pdb</ProgramDatabaseFile>
+      <SubSystem>Console</SubSystem>
+      <TargetMachine>MachineIA64</TargetMachine>
+    </Link>
+  </ItemDefinitionGroup>
+  <ItemDefinitionGroup Condition="'$(Configuration)|$(Platform)'=='Release|x64'">
+    <Midl>
+      <TargetEnvironment>X64</TargetEnvironment>
+    </Midl>
+    <ClCompile>
+      <Optimization>MaxSpeed</Optimization>
+      <InlineFunctionExpansion>OnlyExplicitInline</InlineFunctionExpansion>
+      <OmitFramePointers>true</OmitFramePointers>
+      <AdditionalIncludeDirectories>..\..\..;..\..\minizip;%(AdditionalIncludeDirectories)</AdditionalIncludeDirectories>
+      <PreprocessorDefinitions>_CRT_NONSTDC_NO_DEPRECATE;_CRT_SECURE_NO_DEPRECATE;ZLIB_WINAPI;NDEBUG;_CONSOLE;WIN64;%(PreprocessorDefinitions)</PreprocessorDefinitions>
+      <StringPooling>true</StringPooling>
+      <BasicRuntimeChecks>Default</BasicRuntimeChecks>
+      <RuntimeLibrary>MultiThreadedDLL</RuntimeLibrary>
+      <BufferSecurityCheck>false</BufferSecurityCheck>
+      <FunctionLevelLinking>true</FunctionLevelLinking>
+      <PrecompiledHeader>
+      </PrecompiledHeader>
+      <AssemblerListingLocation>$(IntDir)</AssemblerListingLocation>
+      <WarningLevel>Level3</WarningLevel>
+      <DebugInformationFormat>ProgramDatabase</DebugInformationFormat>
+    </ClCompile>
+    <Link>
+      <AdditionalDependencies>x64\ZlibDllRelease\zlibwapi.lib;%(AdditionalDependencies)</AdditionalDependencies>
+      <OutputFile>$(OutDir)miniunz.exe</OutputFile>
+      <GenerateDebugInformation>true</GenerateDebugInformation>
+      <SubSystem>Console</SubSystem>
+      <OptimizeReferences>true</OptimizeReferences>
+      <EnableCOMDATFolding>true</EnableCOMDATFolding>
+      <TargetMachine>MachineX64</TargetMachine>
+    </Link>
+  </ItemDefinitionGroup>
+  <ItemDefinitionGroup Condition="'$(Configuration)|$(Platform)'=='Release|Itanium'">
+    <Midl>
+      <TargetEnvironment>Itanium</TargetEnvironment>
+    </Midl>
+    <ClCompile>
+      <Optimization>MaxSpeed</Optimization>
+      <InlineFunctionExpansion>OnlyExplicitInline</InlineFunctionExpansion>
+      <OmitFramePointers>true</OmitFramePointers>
+      <AdditionalIncludeDirectories>..\..\..;..\..\minizip;%(AdditionalIncludeDirectories)</AdditionalIncludeDirectories>
+      <PreprocessorDefinitions>_CRT_NONSTDC_NO_DEPRECATE;_CRT_SECURE_NO_DEPRECATE;ZLIB_WINAPI;NDEBUG;_CONSOLE;WIN64;%(PreprocessorDefinitions)</PreprocessorDefinitions>
+      <StringPooling>true</StringPooling>
+      <BasicRuntimeChecks>Default</BasicRuntimeChecks>
+      <RuntimeLibrary>MultiThreadedDLL</RuntimeLibrary>
+      <BufferSecurityCheck>false</BufferSecurityCheck>
+      <FunctionLevelLinking>true</FunctionLevelLinking>
+      <PrecompiledHeader>
+      </PrecompiledHeader>
+      <AssemblerListingLocation>$(IntDir)</AssemblerListingLocation>
+      <WarningLevel>Level3</WarningLevel>
+      <DebugInformationFormat>ProgramDatabase</DebugInformationFormat>
+    </ClCompile>
+    <Link>
+      <AdditionalDependencies>ia64\ZlibDllRelease\zlibwapi.lib;%(AdditionalDependencies)</AdditionalDependencies>
+      <OutputFile>$(OutDir)miniunz.exe</OutputFile>
+      <GenerateDebugInformation>true</GenerateDebugInformation>
+      <SubSystem>Console</SubSystem>
+      <OptimizeReferences>true</OptimizeReferences>
+      <EnableCOMDATFolding>true</EnableCOMDATFolding>
+      <TargetMachine>MachineIA64</TargetMachine>
+    </Link>
+  </ItemDefinitionGroup>
+  <ItemGroup>
+    <ClCompile Include="..\..\minizip\miniunz.c" />
+  </ItemGroup>
+  <ItemGroup>
+    <ProjectReference Include="zlibvc.vcxproj">
+      <Project>{8fd826f8-3739-44e6-8cc8-997122e53b8d}</Project>
+    </ProjectReference>
+  </ItemGroup>
+  <Import Project="$(VCTargetsPath)\Microsoft.Cpp.targets" />
+  <ImportGroup Label="ExtensionTargets">
+  </ImportGroup>
+</Project>

contrib/vstudio/vc10/miniunz.vcxproj.filters

@@ -0,0 +1,22 @@
+<?xml version="1.0" encoding="utf-8"?>
+<Project ToolsVersion="4.0" xmlns="http://schemas.microsoft.com/developer/msbuild/2003">
+  <ItemGroup>
+    <Filter Include="Source Files">
+      <UniqueIdentifier>{048af943-022b-4db6-beeb-a54c34774ee2}</UniqueIdentifier>
+      <Extensions>cpp;c;cxx;def;odl;idl;hpj;bat;asm</Extensions>
+    </Filter>
+    <Filter Include="Header Files">
+      <UniqueIdentifier>{c1d600d2-888f-4aea-b73e-8b0dd9befa0c}</UniqueIdentifier>
+      <Extensions>h;hpp;hxx;hm;inl;inc</Extensions>
+    </Filter>
+    <Filter Include="Resource Files">
+      <UniqueIdentifier>{0844199a-966b-4f19-81db-1e0125e141b9}</UniqueIdentifier>
+      <Extensions>rc;ico;cur;bmp;dlg;rc2;rct;bin;rgs;gif;jpg;jpeg;jpe</Extensions>
+    </Filter>
+  </ItemGroup>
+  <ItemGroup>
+    <ClCompile Include="..\..\minizip\miniunz.c">
+      <Filter>Source Files</Filter>
+    </ClCompile>
+  </ItemGroup>
+</Project>

contrib/vstudio/vc10/miniunz.vcxproj.user

@@ -0,0 +1,3 @@
+<?xml version="1.0" encoding="utf-8"?>
+<Project ToolsVersion="4.0" xmlns="http://schemas.microsoft.com/developer/msbuild/2003">
+</Project>

contrib/vstudio/vc10/minizip.vcxproj

@@ -0,0 +1,307 @@
+<?xml version="1.0" encoding="utf-8"?>
+<Project DefaultTargets="Build" ToolsVersion="4.0" xmlns="http://schemas.microsoft.com/developer/msbuild/2003">
+  <ItemGroup Label="ProjectConfigurations">
+    <ProjectConfiguration Include="Debug|Itanium">
+      <Configuration>Debug</Configuration>
+      <Platform>Itanium</Platform>
+    </ProjectConfiguration>
+    <ProjectConfiguration Include="Debug|Win32">
+      <Configuration>Debug</Configuration>
+      <Platform>Win32</Platform>
+    </ProjectConfiguration>
+    <ProjectConfiguration Include="Debug|x64">
+      <Configuration>Debug</Configuration>
+      <Platform>x64</Platform>
+    </ProjectConfiguration>
+    <ProjectConfiguration Include="Release|Itanium">
+      <Configuration>Release</Configuration>
+      <Platform>Itanium</Platform>
+    </ProjectConfiguration>
+    <ProjectConfiguration Include="Release|Win32">
+      <Configuration>Release</Configuration>
+      <Platform>Win32</Platform>
+    </ProjectConfiguration>
+    <ProjectConfiguration Include="Release|x64">
+      <Configuration>Release</Configuration>
+      <Platform>x64</Platform>
+    </ProjectConfiguration>
+  </ItemGroup>
+  <PropertyGroup Label="Globals">
+    <ProjectGuid>{48CDD9DC-E09F-4135-9C0C-4FE50C3C654B}</ProjectGuid>
+    <Keyword>Win32Proj</Keyword>
+  </PropertyGroup>
+  <Import Project="$(VCTargetsPath)\Microsoft.Cpp.Default.props" />
+  <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Release|Win32'" Label="Configuration">
+    <ConfigurationType>Application</ConfigurationType>
+    <CharacterSet>MultiByte</CharacterSet>
+  </PropertyGroup>
+  <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'" Label="Configuration">
+    <ConfigurationType>Application</ConfigurationType>
+    <CharacterSet>MultiByte</CharacterSet>
+  </PropertyGroup>
+  <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Release|Itanium'" Label="Configuration">
+    <ConfigurationType>Application</ConfigurationType>
+    <CharacterSet>MultiByte</CharacterSet>
+  </PropertyGroup>
+  <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Debug|Itanium'" Label="Configuration">
+    <ConfigurationType>Application</ConfigurationType>
+    <CharacterSet>MultiByte</CharacterSet>
+  </PropertyGroup>
+  <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Release|x64'" Label="Configuration">
+    <ConfigurationType>Application</ConfigurationType>
+    <CharacterSet>MultiByte</CharacterSet>
+  </PropertyGroup>
+  <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Debug|x64'" Label="Configuration">
+    <ConfigurationType>Application</ConfigurationType>
+    <CharacterSet>MultiByte</CharacterSet>
+  </PropertyGroup>
+  <Import Project="$(VCTargetsPath)\Microsoft.Cpp.props" />
+  <ImportGroup Label="ExtensionSettings">
+  </ImportGroup>
+  <ImportGroup Condition="'$(Configuration)|$(Platform)'=='Release|Win32'" Label="PropertySheets">
+    <Import Project="$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props" Condition="exists('$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props')" Label="LocalAppDataPlatform" />
+  </ImportGroup>
+  <ImportGroup Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'" Label="PropertySheets">
+    <Import Project="$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props" Condition="exists('$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props')" Label="LocalAppDataPlatform" />
+  </ImportGroup>
+  <ImportGroup Condition="'$(Configuration)|$(Platform)'=='Release|Itanium'" Label="PropertySheets">
+    <Import Project="$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props" Condition="exists('$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props')" Label="LocalAppDataPlatform" />
+  </ImportGroup>
+  <ImportGroup Condition="'$(Configuration)|$(Platform)'=='Debug|Itanium'" Label="PropertySheets">
+    <Import Project="$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props" Condition="exists('$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props')" Label="LocalAppDataPlatform" />
+  </ImportGroup>
+  <ImportGroup Condition="'$(Configuration)|$(Platform)'=='Release|x64'" Label="PropertySheets">
+    <Import Project="$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props" Condition="exists('$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props')" Label="LocalAppDataPlatform" />
+  </ImportGroup>
+  <ImportGroup Condition="'$(Configuration)|$(Platform)'=='Debug|x64'" Label="PropertySheets">
+    <Import Project="$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props" Condition="exists('$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props')" Label="LocalAppDataPlatform" />
+  </ImportGroup>
+  <PropertyGroup Label="UserMacros" />
+  <PropertyGroup>
+    <_ProjectFileVersion>10.0.30128.1</_ProjectFileVersion>
+    <OutDir Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'">x86\MiniZip$(Configuration)\</OutDir>
+    <IntDir Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'">x86\MiniZip$(Configuration)\Tmp\</IntDir>
+    <LinkIncremental Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'">true</LinkIncremental>
+    <GenerateManifest Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'">false</GenerateManifest>
+    <OutDir Condition="'$(Configuration)|$(Platform)'=='Release|Win32'">x86\MiniZip$(Configuration)\</OutDir>
+    <IntDir Condition="'$(Configuration)|$(Platform)'=='Release|Win32'">x86\MiniZip$(Configuration)\Tmp\</IntDir>
+    <LinkIncremental Condition="'$(Configuration)|$(Platform)'=='Release|Win32'">false</LinkIncremental>
+    <OutDir Condition="'$(Configuration)|$(Platform)'=='Debug|x64'">x64\$(Configuration)\</OutDir>
+    <IntDir Condition="'$(Configuration)|$(Platform)'=='Debug|x64'">x64\$(Configuration)\</IntDir>
+    <LinkIncremental Condition="'$(Configuration)|$(Platform)'=='Debug|x64'">true</LinkIncremental>
+    <GenerateManifest Condition="'$(Configuration)|$(Platform)'=='Debug|x64'">false</GenerateManifest>
+    <OutDir Condition="'$(Configuration)|$(Platform)'=='Debug|Itanium'">ia64\$(Configuration)\</OutDir>
+    <IntDir Condition="'$(Configuration)|$(Platform)'=='Debug|Itanium'">ia64\$(Configuration)\</IntDir>
+    <LinkIncremental Condition="'$(Configuration)|$(Platform)'=='Debug|Itanium'">true</LinkIncremental>
+    <GenerateManifest Condition="'$(Configuration)|$(Platform)'=='Debug|Itanium'">false</GenerateManifest>
+    <OutDir Condition="'$(Configuration)|$(Platform)'=='Release|x64'">x64\$(Configuration)\</OutDir>
+    <IntDir Condition="'$(Configuration)|$(Platform)'=='Release|x64'">x64\$(Configuration)\</IntDir>
+    <LinkIncremental Condition="'$(Configuration)|$(Platform)'=='Release|x64'">false</LinkIncremental>
+    <OutDir Condition="'$(Configuration)|$(Platform)'=='Release|Itanium'">ia64\$(Configuration)\</OutDir>
+    <IntDir Condition="'$(Configuration)|$(Platform)'=='Release|Itanium'">ia64\$(Configuration)\</IntDir>
+    <LinkIncremental Condition="'$(Configuration)|$(Platform)'=='Release|Itanium'">false</LinkIncremental>
+    <CodeAnalysisRuleSet Condition="'$(Configuration)|$(Platform)'=='Debug|Itanium'">AllRules.ruleset</CodeAnalysisRuleSet>
+    <CodeAnalysisRules Condition="'$(Configuration)|$(Platform)'=='Debug|Itanium'" />
+    <CodeAnalysisRuleAssemblies Condition="'$(Configuration)|$(Platform)'=='Debug|Itanium'" />
+    <CodeAnalysisRuleSet Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'">AllRules.ruleset</CodeAnalysisRuleSet>
+    <CodeAnalysisRules Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'" />
+    <CodeAnalysisRuleAssemblies Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'" />
+    <CodeAnalysisRuleSet Condition="'$(Configuration)|$(Platform)'=='Debug|x64'">AllRules.ruleset</CodeAnalysisRuleSet>
+    <CodeAnalysisRules Condition="'$(Configuration)|$(Platform)'=='Debug|x64'" />
+    <CodeAnalysisRuleAssemblies Condition="'$(Configuration)|$(Platform)'=='Debug|x64'" />
+    <CodeAnalysisRuleSet Condition="'$(Configuration)|$(Platform)'=='Release|Itanium'">AllRules.ruleset</CodeAnalysisRuleSet>
+    <CodeAnalysisRules Condition="'$(Configuration)|$(Platform)'=='Release|Itanium'" />
+    <CodeAnalysisRuleAssemblies Condition="'$(Configuration)|$(Platform)'=='Release|Itanium'" />
+    <CodeAnalysisRuleSet Condition="'$(Configuration)|$(Platform)'=='Release|Win32'">AllRules.ruleset</CodeAnalysisRuleSet>
+    <CodeAnalysisRules Condition="'$(Configuration)|$(Platform)'=='Release|Win32'" />
+    <CodeAnalysisRuleAssemblies Condition="'$(Configuration)|$(Platform)'=='Release|Win32'" />
+    <CodeAnalysisRuleSet Condition="'$(Configuration)|$(Platform)'=='Release|x64'">AllRules.ruleset</CodeAnalysisRuleSet>
+    <CodeAnalysisRules Condition="'$(Configuration)|$(Platform)'=='Release|x64'" />
+    <CodeAnalysisRuleAssemblies Condition="'$(Configuration)|$(Platform)'=='Release|x64'" />
+  </PropertyGroup>
+  <ItemDefinitionGroup Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'">
+    <ClCompile>
+      <Optimization>Disabled</Optimization>
+      <AdditionalIncludeDirectories>..\..\..;..\..\minizip;%(AdditionalIncludeDirectories)</AdditionalIncludeDirectories>
+      <PreprocessorDefinitions>WIN32;_CRT_NONSTDC_NO_DEPRECATE;_CRT_SECURE_NO_DEPRECATE;ZLIB_WINAPI;_DEBUG;_CONSOLE;%(PreprocessorDefinitions)</PreprocessorDefinitions>
+      <MinimalRebuild>true</MinimalRebuild>
+      <BasicRuntimeChecks>Default</BasicRuntimeChecks>
+      <RuntimeLibrary>MultiThreadedDebug</RuntimeLibrary>
+      <BufferSecurityCheck>false</BufferSecurityCheck>
+      <PrecompiledHeader>
+      </PrecompiledHeader>
+      <AssemblerListingLocation>$(IntDir)</AssemblerListingLocation>
+      <WarningLevel>Level3</WarningLevel>
+      <DebugInformationFormat>EditAndContinue</DebugInformationFormat>
+    </ClCompile>
+    <Link>
+      <AdditionalDependencies>x86\ZlibDllDebug\zlibwapi.lib;%(AdditionalDependencies)</AdditionalDependencies>
+      <OutputFile>$(OutDir)minizip.exe</OutputFile>
+      <GenerateDebugInformation>true</GenerateDebugInformation>
+      <ProgramDatabaseFile>$(OutDir)minizip.pdb</ProgramDatabaseFile>
+      <SubSystem>Console</SubSystem>
+      <RandomizedBaseAddress>false</RandomizedBaseAddress>
+      <DataExecutionPrevention>
+      </DataExecutionPrevention>
+      <TargetMachine>MachineX86</TargetMachine>
+    </Link>
+  </ItemDefinitionGroup>
+  <ItemDefinitionGroup Condition="'$(Configuration)|$(Platform)'=='Release|Win32'">
+    <ClCompile>
+      <Optimization>MaxSpeed</Optimization>
+      <InlineFunctionExpansion>OnlyExplicitInline</InlineFunctionExpansion>
+      <OmitFramePointers>true</OmitFramePointers>
+      <AdditionalIncludeDirectories>..\..\..;..\..\minizip;%(AdditionalIncludeDirectories)</AdditionalIncludeDirectories>
+      <PreprocessorDefinitions>WIN32;_CRT_NONSTDC_NO_DEPRECATE;_CRT_SECURE_NO_DEPRECATE;ZLIB_WINAPI;NDEBUG;_CONSOLE;%(PreprocessorDefinitions)</PreprocessorDefinitions>
+      <StringPooling>true</StringPooling>
+      <BasicRuntimeChecks>Default</BasicRuntimeChecks>
+      <RuntimeLibrary>MultiThreaded</RuntimeLibrary>
+      <BufferSecurityCheck>false</BufferSecurityCheck>
+      <FunctionLevelLinking>true</FunctionLevelLinking>
+      <PrecompiledHeader>
+      </PrecompiledHeader>
+      <AssemblerListingLocation>$(IntDir)</AssemblerListingLocation>
+      <WarningLevel>Level3</WarningLevel>
+      <DebugInformationFormat>ProgramDatabase</DebugInformationFormat>
+    </ClCompile>
+    <Link>
+      <AdditionalDependencies>x86\ZlibDllRelease\zlibwapi.lib;%(AdditionalDependencies)</AdditionalDependencies>
+      <OutputFile>$(OutDir)minizip.exe</OutputFile>
+      <GenerateDebugInformation>true</GenerateDebugInformation>
+      <SubSystem>Console</SubSystem>
+      <OptimizeReferences>true</OptimizeReferences>
+      <EnableCOMDATFolding>true</EnableCOMDATFolding>
+      <RandomizedBaseAddress>false</RandomizedBaseAddress>
+      <DataExecutionPrevention>
+      </DataExecutionPrevention>
+      <TargetMachine>MachineX86</TargetMachine>
+    </Link>
+  </ItemDefinitionGroup>
+  <ItemDefinitionGroup Condition="'$(Configuration)|$(Platform)'=='Debug|x64'">
+    <Midl>
+      <TargetEnvironment>X64</TargetEnvironment>
+    </Midl>
+    <ClCompile>
+      <Optimization>Disabled</Optimization>
+      <AdditionalIncludeDirectories>..\..\..;..\..\minizip;%(AdditionalIncludeDirectories)</AdditionalIncludeDirectories>
+      <PreprocessorDefinitions>_CRT_NONSTDC_NO_DEPRECATE;_CRT_SECURE_NO_DEPRECATE;ZLIB_WINAPI;_DEBUG;_CONSOLE;WIN64;%(PreprocessorDefinitions)</PreprocessorDefinitions>
+      <MinimalRebuild>true</MinimalRebuild>
+      <BasicRuntimeChecks>Default</BasicRuntimeChecks>
+      <RuntimeLibrary>MultiThreadedDebugDLL</RuntimeLibrary>
+      <BufferSecurityCheck>false</BufferSecurityCheck>
+      <PrecompiledHeader>
+      </PrecompiledHeader>
+      <AssemblerListingLocation>$(IntDir)</AssemblerListingLocation>
+      <WarningLevel>Level3</WarningLevel>
+      <DebugInformationFormat>ProgramDatabase</DebugInformationFormat>
+    </ClCompile>
+    <Link>
+      <AdditionalDependencies>x64\ZlibDllDebug\zlibwapi.lib;%(AdditionalDependencies)</AdditionalDependencies>
+      <OutputFile>$(OutDir)minizip.exe</OutputFile>
+      <GenerateDebugInformation>true</GenerateDebugInformation>
+      <ProgramDatabaseFile>$(OutDir)minizip.pdb</ProgramDatabaseFile>
+      <SubSystem>Console</SubSystem>
+      <TargetMachine>MachineX64</TargetMachine>
+    </Link>
+  </ItemDefinitionGroup>
+  <ItemDefinitionGroup Condition="'$(Configuration)|$(Platform)'=='Debug|Itanium'">
+    <Midl>
+      <TargetEnvironment>Itanium</TargetEnvironment>
+    </Midl>
+    <ClCompile>
+      <Optimization>Disabled</Optimization>
+      <AdditionalIncludeDirectories>..\..\..;..\..\minizip;%(AdditionalIncludeDirectories)</AdditionalIncludeDirectories>
+      <PreprocessorDefinitions>_CRT_NONSTDC_NO_DEPRECATE;_CRT_SECURE_NO_DEPRECATE;ZLIB_WINAPI;_DEBUG;_CONSOLE;WIN64;%(PreprocessorDefinitions)</PreprocessorDefinitions>
+      <MinimalRebuild>true</MinimalRebuild>
+      <BasicRuntimeChecks>Default</BasicRuntimeChecks>
+      <RuntimeLibrary>MultiThreadedDebugDLL</RuntimeLibrary>
+      <BufferSecurityCheck>false</BufferSecurityCheck>
+      <PrecompiledHeader>
+      </PrecompiledHeader>
+      <AssemblerListingLocation>$(IntDir)</AssemblerListingLocation>
+      <WarningLevel>Level3</WarningLevel>
+      <DebugInformationFormat>ProgramDatabase</DebugInformationFormat>
+    </ClCompile>
+    <Link>
+      <AdditionalDependencies>ia64\ZlibDllDebug\zlibwapi.lib;%(AdditionalDependencies)</AdditionalDependencies>
+      <OutputFile>$(OutDir)minizip.exe</OutputFile>
+      <GenerateDebugInformation>true</GenerateDebugInformation>
+      <ProgramDatabaseFile>$(OutDir)minizip.pdb</ProgramDatabaseFile>
+      <SubSystem>Console</SubSystem>
+      <TargetMachine>MachineIA64</TargetMachine>
+    </Link>
+  </ItemDefinitionGroup>
+  <ItemDefinitionGroup Condition="'$(Configuration)|$(Platform)'=='Release|x64'">
+    <Midl>
+      <TargetEnvironment>X64</TargetEnvironment>
+    </Midl>
+    <ClCompile>
+      <Optimization>MaxSpeed</Optimization>
+      <InlineFunctionExpansion>OnlyExplicitInline</InlineFunctionExpansion>
+      <OmitFramePointers>true</OmitFramePointers>
+      <AdditionalIncludeDirectories>..\..\..;..\..\minizip;%(AdditionalIncludeDirectories)</AdditionalIncludeDirectories>
+      <PreprocessorDefinitions>_CRT_NONSTDC_NO_DEPRECATE;_CRT_SECURE_NO_DEPRECATE;ZLIB_WINAPI;NDEBUG;_CONSOLE;WIN64;%(PreprocessorDefinitions)</PreprocessorDefinitions>
+      <StringPooling>true</StringPooling>
+      <BasicRuntimeChecks>Default</BasicRuntimeChecks>
+      <RuntimeLibrary>MultiThreadedDLL</RuntimeLibrary>
+      <BufferSecurityCheck>false</BufferSecurityCheck>
+      <FunctionLevelLinking>true</FunctionLevelLinking>
+      <PrecompiledHeader>
+      </PrecompiledHeader>
+      <AssemblerListingLocation>$(IntDir)</AssemblerListingLocation>
+      <WarningLevel>Level3</WarningLevel>
+      <DebugInformationFormat>ProgramDatabase</DebugInformationFormat>
+    </ClCompile>
+    <Link>
+      <AdditionalDependencies>x64\ZlibDllRelease\zlibwapi.lib;%(AdditionalDependencies)</AdditionalDependencies>
+      <OutputFile>$(OutDir)minizip.exe</OutputFile>
+      <GenerateDebugInformation>true</GenerateDebugInformation>
+      <SubSystem>Console</SubSystem>
+      <OptimizeReferences>true</OptimizeReferences>
+      <EnableCOMDATFolding>true</EnableCOMDATFolding>
+      <TargetMachine>MachineX64</TargetMachine>
+    </Link>
+  </ItemDefinitionGroup>
+  <ItemDefinitionGroup Condition="'$(Configuration)|$(Platform)'=='Release|Itanium'">
+    <Midl>
+      <TargetEnvironment>Itanium</TargetEnvironment>
+    </Midl>
+    <ClCompile>
+      <Optimization>MaxSpeed</Optimization>
+      <InlineFunctionExpansion>OnlyExplicitInline</InlineFunctionExpansion>
+      <OmitFramePointers>true</OmitFramePointers>
+      <AdditionalIncludeDirectories>..\..\..;..\..\minizip;%(AdditionalIncludeDirectories)</AdditionalIncludeDirectories>
+      <PreprocessorDefinitions>_CRT_NONSTDC_NO_DEPRECATE;_CRT_SECURE_NO_DEPRECATE;ZLIB_WINAPI;NDEBUG;_CONSOLE;WIN64;%(PreprocessorDefinitions)</PreprocessorDefinitions>
+      <StringPooling>true</StringPooling>
+      <BasicRuntimeChecks>Default</BasicRuntimeChecks>
+      <RuntimeLibrary>MultiThreadedDLL</RuntimeLibrary>
+      <BufferSecurityCheck>false</BufferSecurityCheck>
+      <FunctionLevelLinking>true</FunctionLevelLinking>
+      <PrecompiledHeader>
+      </PrecompiledHeader>
+      <AssemblerListingLocation>$(IntDir)</AssemblerListingLocation>
+      <WarningLevel>Level3</WarningLevel>
+      <DebugInformationFormat>ProgramDatabase</DebugInformationFormat>
+    </ClCompile>
+    <Link>
+      <AdditionalDependencies>ia64\ZlibDllRelease\zlibwapi.lib;%(AdditionalDependencies)</AdditionalDependencies>
+      <OutputFile>$(OutDir)minizip.exe</OutputFile>
+      <GenerateDebugInformation>true</GenerateDebugInformation>
+      <SubSystem>Console</SubSystem>
+      <OptimizeReferences>true</OptimizeReferences>
+      <EnableCOMDATFolding>true</EnableCOMDATFolding>
+      <TargetMachine>MachineIA64</TargetMachine>
+    </Link>
+  </ItemDefinitionGroup>
+  <ItemGroup>
+    <ClCompile Include="..\..\minizip\minizip.c" />
+  </ItemGroup>
+  <ItemGroup>
+    <ProjectReference Include="zlibvc.vcxproj">
+      <Project>{8fd826f8-3739-44e6-8cc8-997122e53b8d}</Project>
+    </ProjectReference>
+  </ItemGroup>
+  <Import Project="$(VCTargetsPath)\Microsoft.Cpp.targets" />
+  <ImportGroup Label="ExtensionTargets">
+  </ImportGroup>
+</Project>

contrib/vstudio/vc10/minizip.vcxproj.filters

@@ -0,0 +1,22 @@
+<?xml version="1.0" encoding="utf-8"?>
+<Project ToolsVersion="4.0" xmlns="http://schemas.microsoft.com/developer/msbuild/2003">
+  <ItemGroup>
+    <Filter Include="Source Files">
+      <UniqueIdentifier>{c0419b40-bf50-40da-b153-ff74215b79de}</UniqueIdentifier>
+      <Extensions>cpp;c;cxx;def;odl;idl;hpj;bat;asm</Extensions>
+    </Filter>
+    <Filter Include="Header Files">
+      <UniqueIdentifier>{bb87b070-735b-478e-92ce-7383abb2f36c}</UniqueIdentifier>
+      <Extensions>h;hpp;hxx;hm;inl;inc</Extensions>
+    </Filter>
+    <Filter Include="Resource Files">
+      <UniqueIdentifier>{f46ab6a6-548f-43cb-ae96-681abb5bd5db}</UniqueIdentifier>
+      <Extensions>rc;ico;cur;bmp;dlg;rc2;rct;bin;rgs;gif;jpg;jpeg;jpe</Extensions>
+    </Filter>
+  </ItemGroup>
+  <ItemGroup>
+    <ClCompile Include="..\..\minizip\minizip.c">
+      <Filter>Source Files</Filter>
+    </ClCompile>
+  </ItemGroup>
+</Project>

contrib/vstudio/vc10/minizip.vcxproj.user

@@ -0,0 +1,3 @@
+<?xml version="1.0" encoding="utf-8"?>
+<Project ToolsVersion="4.0" xmlns="http://schemas.microsoft.com/developer/msbuild/2003">
+</Project>

contrib/vstudio/vc10/testzlib.vcxproj

@@ -0,0 +1,420 @@
+<?xml version="1.0" encoding="utf-8"?>
+<Project DefaultTargets="Build" ToolsVersion="4.0" xmlns="http://schemas.microsoft.com/developer/msbuild/2003">
+  <ItemGroup Label="ProjectConfigurations">
+    <ProjectConfiguration Include="Debug|Itanium">
+      <Configuration>Debug</Configuration>
+      <Platform>Itanium</Platform>
+    </ProjectConfiguration>
+    <ProjectConfiguration Include="Debug|Win32">
+      <Configuration>Debug</Configuration>
+      <Platform>Win32</Platform>
+    </ProjectConfiguration>
+    <ProjectConfiguration Include="Debug|x64">
+      <Configuration>Debug</Configuration>
+      <Platform>x64</Platform>
+    </ProjectConfiguration>
+    <ProjectConfiguration Include="ReleaseWithoutAsm|Itanium">
+      <Configuration>ReleaseWithoutAsm</Configuration>
+      <Platform>Itanium</Platform>
+    </ProjectConfiguration>
+    <ProjectConfiguration Include="ReleaseWithoutAsm|Win32">
+      <Configuration>ReleaseWithoutAsm</Configuration>
+      <Platform>Win32</Platform>
+    </ProjectConfiguration>
+    <ProjectConfiguration Include="ReleaseWithoutAsm|x64">
+      <Configuration>ReleaseWithoutAsm</Configuration>
+      <Platform>x64</Platform>
+    </ProjectConfiguration>
+    <ProjectConfiguration Include="Release|Itanium">
+      <Configuration>Release</Configuration>
+      <Platform>Itanium</Platform>
+    </ProjectConfiguration>
+    <ProjectConfiguration Include="Release|Win32">
+      <Configuration>Release</Configuration>
+      <Platform>Win32</Platform>
+    </ProjectConfiguration>
+    <ProjectConfiguration Include="Release|x64">
+      <Configuration>Release</Configuration>
+      <Platform>x64</Platform>
+    </ProjectConfiguration>
+  </ItemGroup>
+  <PropertyGroup Label="Globals">
+    <ProjectGuid>{AA6666AA-E09F-4135-9C0C-4FE50C3C654B}</ProjectGuid>
+    <RootNamespace>testzlib</RootNamespace>
+    <Keyword>Win32Proj</Keyword>
+  </PropertyGroup>
+  <Import Project="$(VCTargetsPath)\Microsoft.Cpp.Default.props" />
+  <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Release|Win32'" Label="Configuration">
+    <ConfigurationType>Application</ConfigurationType>
+    <CharacterSet>MultiByte</CharacterSet>
+    <WholeProgramOptimization>true</WholeProgramOptimization>
+  </PropertyGroup>
+  <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='ReleaseWithoutAsm|Win32'" Label="Configuration">
+    <ConfigurationType>Application</ConfigurationType>
+    <CharacterSet>MultiByte</CharacterSet>
+    <WholeProgramOptimization>true</WholeProgramOptimization>
+  </PropertyGroup>
+  <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'" Label="Configuration">
+    <ConfigurationType>Application</ConfigurationType>
+    <CharacterSet>MultiByte</CharacterSet>
+  </PropertyGroup>
+  <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Release|Itanium'" Label="Configuration">
+    <ConfigurationType>Application</ConfigurationType>
+    <CharacterSet>MultiByte</CharacterSet>
+    <WholeProgramOptimization>true</WholeProgramOptimization>
+  </PropertyGroup>
+  <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='ReleaseWithoutAsm|Itanium'" Label="Configuration">
+    <ConfigurationType>Application</ConfigurationType>
+    <CharacterSet>MultiByte</CharacterSet>
+    <WholeProgramOptimization>true</WholeProgramOptimization>
+  </PropertyGroup>
+  <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Debug|Itanium'" Label="Configuration">
+    <ConfigurationType>Application</ConfigurationType>
+    <CharacterSet>MultiByte</CharacterSet>
+  </PropertyGroup>
+  <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Release|x64'" Label="Configuration">
+    <ConfigurationType>Application</ConfigurationType>
+    <WholeProgramOptimization>true</WholeProgramOptimization>
+  </PropertyGroup>
+  <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='ReleaseWithoutAsm|x64'" Label="Configuration">
+    <ConfigurationType>Application</ConfigurationType>
+    <WholeProgramOptimization>true</WholeProgramOptimization>
+  </PropertyGroup>
+  <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Debug|x64'" Label="Configuration">
+    <ConfigurationType>Application</ConfigurationType>
+  </PropertyGroup>
+  <Import Project="$(VCTargetsPath)\Microsoft.Cpp.props" />
+  <ImportGroup Label="ExtensionSettings">
+  </ImportGroup>
+  <ImportGroup Condition="'$(Configuration)|$(Platform)'=='Release|Win32'" Label="PropertySheets">
+    <Import Project="$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props" Condition="exists('$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props')" Label="LocalAppDataPlatform" />
+  </ImportGroup>
+  <ImportGroup Condition="'$(Configuration)|$(Platform)'=='ReleaseWithoutAsm|Win32'" Label="PropertySheets">
+    <Import Project="$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props" Condition="exists('$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props')" Label="LocalAppDataPlatform" />
+  </ImportGroup>
+  <ImportGroup Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'" Label="PropertySheets">
+    <Import Project="$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props" Condition="exists('$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props')" Label="LocalAppDataPlatform" />
+  </ImportGroup>
+  <ImportGroup Condition="'$(Configuration)|$(Platform)'=='Release|Itanium'" Label="PropertySheets">
+    <Import Project="$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props" Condition="exists('$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props')" Label="LocalAppDataPlatform" />
+  </ImportGroup>
+  <ImportGroup Condition="'$(Configuration)|$(Platform)'=='ReleaseWithoutAsm|Itanium'" Label="PropertySheets">
+    <Import Project="$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props" Condition="exists('$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props')" Label="LocalAppDataPlatform" />
+  </ImportGroup>
+  <ImportGroup Condition="'$(Configuration)|$(Platform)'=='Debug|Itanium'" Label="PropertySheets">
+    <Import Project="$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props" Condition="exists('$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props')" Label="LocalAppDataPlatform" />
+  </ImportGroup>
+  <ImportGroup Condition="'$(Configuration)|$(Platform)'=='Release|x64'" Label="PropertySheets">
+    <Import Project="$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props" Condition="exists('$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props')" Label="LocalAppDataPlatform" />
+  </ImportGroup>
+  <ImportGroup Condition="'$(Configuration)|$(Platform)'=='ReleaseWithoutAsm|x64'" Label="PropertySheets">
+    <Import Project="$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props" Condition="exists('$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props')" Label="LocalAppDataPlatform" />
+  </ImportGroup>
+  <ImportGroup Condition="'$(Configuration)|$(Platform)'=='Debug|x64'" Label="PropertySheets">
+    <Import Project="$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props" Condition="exists('$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props')" Label="LocalAppDataPlatform" />
+  </ImportGroup>
+  <PropertyGroup Label="UserMacros" />
+  <PropertyGroup>
+    <_ProjectFileVersion>10.0.30128.1</_ProjectFileVersion>
+    <OutDir Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'">x86\TestZlib$(Configuration)\</OutDir>
+    <IntDir Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'">x86\TestZlib$(Configuration)\Tmp\</IntDir>
+    <LinkIncremental Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'">true</LinkIncremental>
+    <GenerateManifest Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'">false</GenerateManifest>
+    <OutDir Condition="'$(Configuration)|$(Platform)'=='ReleaseWithoutAsm|Win32'">x86\TestZlib$(Configuration)\</OutDir>
+    <IntDir Condition="'$(Configuration)|$(Platform)'=='ReleaseWithoutAsm|Win32'">x86\TestZlib$(Configuration)\Tmp\</IntDir>
+    <LinkIncremental Condition="'$(Configuration)|$(Platform)'=='ReleaseWithoutAsm|Win32'">false</LinkIncremental>
+    <GenerateManifest Condition="'$(Configuration)|$(Platform)'=='ReleaseWithoutAsm|Win32'">false</GenerateManifest>
+    <OutDir Condition="'$(Configuration)|$(Platform)'=='Release|Win32'">x86\TestZlib$(Configuration)\</OutDir>
+    <IntDir Condition="'$(Configuration)|$(Platform)'=='Release|Win32'">x86\TestZlib$(Configuration)\Tmp\</IntDir>
+    <LinkIncremental Condition="'$(Configuration)|$(Platform)'=='Release|Win32'">false</LinkIncremental>
+    <GenerateManifest Condition="'$(Configuration)|$(Platform)'=='Release|Win32'">false</GenerateManifest>
+    <OutDir Condition="'$(Configuration)|$(Platform)'=='Debug|x64'">x64\TestZlib$(Configuration)\</OutDir>
+    <IntDir Condition="'$(Configuration)|$(Platform)'=='Debug|x64'">x64\TestZlib$(Configuration)\Tmp\</IntDir>
+    <GenerateManifest Condition="'$(Configuration)|$(Platform)'=='Debug|x64'">false</GenerateManifest>
+    <OutDir Condition="'$(Configuration)|$(Platform)'=='Debug|Itanium'">ia64\TestZlib$(Configuration)\</OutDir>
+    <IntDir Condition="'$(Configuration)|$(Platform)'=='Debug|Itanium'">ia64\TestZlib$(Configuration)\Tmp\</IntDir>
+    <LinkIncremental Condition="'$(Configuration)|$(Platform)'=='Debug|Itanium'">true</LinkIncremental>
+    <GenerateManifest Condition="'$(Configuration)|$(Platform)'=='Debug|Itanium'">false</GenerateManifest>
+    <OutDir Condition="'$(Configuration)|$(Platform)'=='ReleaseWithoutAsm|x64'">x64\TestZlib$(Configuration)\</OutDir>
+    <IntDir Condition="'$(Configuration)|$(Platform)'=='ReleaseWithoutAsm|x64'">x64\TestZlib$(Configuration)\Tmp\</IntDir>
+    <GenerateManifest Condition="'$(Configuration)|$(Platform)'=='ReleaseWithoutAsm|x64'">false</GenerateManifest>
+    <OutDir Condition="'$(Configuration)|$(Platform)'=='ReleaseWithoutAsm|Itanium'">ia64\TestZlib$(Configuration)\</OutDir>
+    <IntDir Condition="'$(Configuration)|$(Platform)'=='ReleaseWithoutAsm|Itanium'">ia64\TestZlib$(Configuration)\Tmp\</IntDir>
+    <LinkIncremental Condition="'$(Configuration)|$(Platform)'=='ReleaseWithoutAsm|Itanium'">false</LinkIncremental>
+    <GenerateManifest Condition="'$(Configuration)|$(Platform)'=='ReleaseWithoutAsm|Itanium'">false</GenerateManifest>
+    <OutDir Condition="'$(Configuration)|$(Platform)'=='Release|x64'">x64\TestZlib$(Configuration)\</OutDir>
+    <IntDir Condition="'$(Configuration)|$(Platform)'=='Release|x64'">x64\TestZlib$(Configuration)\Tmp\</IntDir>
+    <GenerateManifest Condition="'$(Configuration)|$(Platform)'=='Release|x64'">false</GenerateManifest>
+    <OutDir Condition="'$(Configuration)|$(Platform)'=='Release|Itanium'">ia64\TestZlib$(Configuration)\</OutDir>
+    <IntDir Condition="'$(Configuration)|$(Platform)'=='Release|Itanium'">ia64\TestZlib$(Configuration)\Tmp\</IntDir>
+    <LinkIncremental Condition="'$(Configuration)|$(Platform)'=='Release|Itanium'">false</LinkIncremental>
+    <GenerateManifest Condition="'$(Configuration)|$(Platform)'=='Release|Itanium'">false</GenerateManifest>
+    <CodeAnalysisRuleSet Condition="'$(Configuration)|$(Platform)'=='Debug|Itanium'">AllRules.ruleset</CodeAnalysisRuleSet>
+    <CodeAnalysisRules Condition="'$(Configuration)|$(Platform)'=='Debug|Itanium'" />
+    <CodeAnalysisRuleAssemblies Condition="'$(Configuration)|$(Platform)'=='Debug|Itanium'" />
+    <CodeAnalysisRuleSet Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'">AllRules.ruleset</CodeAnalysisRuleSet>
+    <CodeAnalysisRules Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'" />
+    <CodeAnalysisRuleAssemblies Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'" />
+    <CodeAnalysisRuleSet Condition="'$(Configuration)|$(Platform)'=='Debug|x64'">AllRules.ruleset</CodeAnalysisRuleSet>
+    <CodeAnalysisRules Condition="'$(Configuration)|$(Platform)'=='Debug|x64'" />
+    <CodeAnalysisRuleAssemblies Condition="'$(Configuration)|$(Platform)'=='Debug|x64'" />
+    <CodeAnalysisRuleSet Condition="'$(Configuration)|$(Platform)'=='ReleaseWithoutAsm|Itanium'">AllRules.ruleset</CodeAnalysisRuleSet>
+    <CodeAnalysisRules Condition="'$(Configuration)|$(Platform)'=='ReleaseWithoutAsm|Itanium'" />
+    <CodeAnalysisRuleAssemblies Condition="'$(Configuration)|$(Platform)'=='ReleaseWithoutAsm|Itanium'" />
+    <CodeAnalysisRuleSet Condition="'$(Configuration)|$(Platform)'=='ReleaseWithoutAsm|Win32'">AllRules.ruleset</CodeAnalysisRuleSet>
+    <CodeAnalysisRules Condition="'$(Configuration)|$(Platform)'=='ReleaseWithoutAsm|Win32'" />
+    <CodeAnalysisRuleAssemblies Condition="'$(Configuration)|$(Platform)'=='ReleaseWithoutAsm|Win32'" />
+    <CodeAnalysisRuleSet Condition="'$(Configuration)|$(Platform)'=='ReleaseWithoutAsm|x64'">AllRules.ruleset</CodeAnalysisRuleSet>
+    <CodeAnalysisRules Condition="'$(Configuration)|$(Platform)'=='ReleaseWithoutAsm|x64'" />
+    <CodeAnalysisRuleAssemblies Condition="'$(Configuration)|$(Platform)'=='ReleaseWithoutAsm|x64'" />
+    <CodeAnalysisRuleSet Condition="'$(Configuration)|$(Platform)'=='Release|Itanium'">AllRules.ruleset</CodeAnalysisRuleSet>
+    <CodeAnalysisRules Condition="'$(Configuration)|$(Platform)'=='Release|Itanium'" />
+    <CodeAnalysisRuleAssemblies Condition="'$(Configuration)|$(Platform)'=='Release|Itanium'" />
+    <CodeAnalysisRuleSet Condition="'$(Configuration)|$(Platform)'=='Release|Win32'">AllRules.ruleset</CodeAnalysisRuleSet>
+    <CodeAnalysisRules Condition="'$(Configuration)|$(Platform)'=='Release|Win32'" />
+    <CodeAnalysisRuleAssemblies Condition="'$(Configuration)|$(Platform)'=='Release|Win32'" />
+    <CodeAnalysisRuleSet Condition="'$(Configuration)|$(Platform)'=='Release|x64'">AllRules.ruleset</CodeAnalysisRuleSet>
+    <CodeAnalysisRules Condition="'$(Configuration)|$(Platform)'=='Release|x64'" />
+    <CodeAnalysisRuleAssemblies Condition="'$(Configuration)|$(Platform)'=='Release|x64'" />
+  </PropertyGroup>
+  <ItemDefinitionGroup Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'">
+    <ClCompile>
+      <Optimization>Disabled</Optimization>
+      <AdditionalIncludeDirectories>..\..\..;%(AdditionalIncludeDirectories)</AdditionalIncludeDirectories>
+      <PreprocessorDefinitions>ASMV;ASMINF;WIN32;ZLIB_WINAPI;_DEBUG;_CONSOLE;_CRT_NONSTDC_NO_DEPRECATE;_CRT_SECURE_NO_DEPRECATE;_CRT_NONSTDC_NO_WARNINGS;%(PreprocessorDefinitions)</PreprocessorDefinitions>
+      <MinimalRebuild>true</MinimalRebuild>
+      <BasicRuntimeChecks>Default</BasicRuntimeChecks>
+      <RuntimeLibrary>MultiThreadedDebug</RuntimeLibrary>
+      <BufferSecurityCheck>false</BufferSecurityCheck>
+      <PrecompiledHeader>
+      </PrecompiledHeader>
+      <AssemblerOutput>AssemblyAndSourceCode</AssemblerOutput>
+      <AssemblerListingLocation>$(IntDir)</AssemblerListingLocation>
+      <WarningLevel>Level3</WarningLevel>
+      <DebugInformationFormat>EditAndContinue</DebugInformationFormat>
+    </ClCompile>
+    <Link>
+      <AdditionalDependencies>..\..\masmx86\match686.obj;..\..\masmx86\inffas32.obj;%(AdditionalDependencies)</AdditionalDependencies>
+      <OutputFile>$(OutDir)testzlib.exe</OutputFile>
+      <GenerateDebugInformation>true</GenerateDebugInformation>
+      <ProgramDatabaseFile>$(OutDir)testzlib.pdb</ProgramDatabaseFile>
+      <SubSystem>Console</SubSystem>
+      <RandomizedBaseAddress>false</RandomizedBaseAddress>
+      <DataExecutionPrevention>
+      </DataExecutionPrevention>
+      <TargetMachine>MachineX86</TargetMachine>
+    </Link>
+  </ItemDefinitionGroup>
+  <ItemDefinitionGroup Condition="'$(Configuration)|$(Platform)'=='ReleaseWithoutAsm|Win32'">
+    <ClCompile>
+      <Optimization>MaxSpeed</Optimization>
+      <InlineFunctionExpansion>OnlyExplicitInline</InlineFunctionExpansion>
+      <OmitFramePointers>true</OmitFramePointers>
+      <AdditionalIncludeDirectories>..\..\..;%(AdditionalIncludeDirectories)</AdditionalIncludeDirectories>
+      <PreprocessorDefinitions>WIN32;ZLIB_WINAPI;NDEBUG;_CONSOLE;_CRT_NONSTDC_NO_DEPRECATE;_CRT_SECURE_NO_DEPRECATE;_CRT_NONSTDC_NO_WARNINGS;%(PreprocessorDefinitions)</PreprocessorDefinitions>
+      <StringPooling>true</StringPooling>
+      <BasicRuntimeChecks>Default</BasicRuntimeChecks>
+      <RuntimeLibrary>MultiThreaded</RuntimeLibrary>
+      <BufferSecurityCheck>false</BufferSecurityCheck>
+      <FunctionLevelLinking>true</FunctionLevelLinking>
+      <PrecompiledHeader>
+      </PrecompiledHeader>
+      <AssemblerListingLocation>$(IntDir)</AssemblerListingLocation>
+      <WarningLevel>Level3</WarningLevel>
+      <DebugInformationFormat>ProgramDatabase</DebugInformationFormat>
+    </ClCompile>
+    <Link>
+      <OutputFile>$(OutDir)testzlib.exe</OutputFile>
+      <GenerateDebugInformation>true</GenerateDebugInformation>
+      <SubSystem>Console</SubSystem>
+      <OptimizeReferences>true</OptimizeReferences>
+      <EnableCOMDATFolding>true</EnableCOMDATFolding>
+      <RandomizedBaseAddress>false</RandomizedBaseAddress>
+      <DataExecutionPrevention>
+      </DataExecutionPrevention>
+      <TargetMachine>MachineX86</TargetMachine>
+    </Link>
+  </ItemDefinitionGroup>
+  <ItemDefinitionGroup Condition="'$(Configuration)|$(Platform)'=='Release|Win32'">
+    <ClCompile>
+      <Optimization>MaxSpeed</Optimization>
+      <InlineFunctionExpansion>OnlyExplicitInline</InlineFunctionExpansion>
+      <OmitFramePointers>true</OmitFramePointers>
+      <AdditionalIncludeDirectories>..\..\..;%(AdditionalIncludeDirectories)</AdditionalIncludeDirectories>
+      <PreprocessorDefinitions>ASMV;ASMINF;WIN32;ZLIB_WINAPI;NDEBUG;_CONSOLE;_CRT_NONSTDC_NO_DEPRECATE;_CRT_SECURE_NO_DEPRECATE;_CRT_NONSTDC_NO_WARNINGS;%(PreprocessorDefinitions)</PreprocessorDefinitions>
+      <StringPooling>true</StringPooling>
+      <BasicRuntimeChecks>Default</BasicRuntimeChecks>
+      <RuntimeLibrary>MultiThreaded</RuntimeLibrary>
+      <BufferSecurityCheck>false</BufferSecurityCheck>
+      <FunctionLevelLinking>true</FunctionLevelLinking>
+      <PrecompiledHeader>
+      </PrecompiledHeader>
+      <AssemblerListingLocation>$(IntDir)</AssemblerListingLocation>
+      <WarningLevel>Level3</WarningLevel>
+      <DebugInformationFormat>ProgramDatabase</DebugInformationFormat>
+    </ClCompile>
+    <Link>
+      <AdditionalDependencies>..\..\masmx86\match686.obj;..\..\masmx86\inffas32.obj;%(AdditionalDependencies)</AdditionalDependencies>
+      <OutputFile>$(OutDir)testzlib.exe</OutputFile>
+      <GenerateDebugInformation>true</GenerateDebugInformation>
+      <SubSystem>Console</SubSystem>
+      <OptimizeReferences>true</OptimizeReferences>
+      <EnableCOMDATFolding>true</EnableCOMDATFolding>
+      <RandomizedBaseAddress>false</RandomizedBaseAddress>
+      <DataExecutionPrevention>
+      </DataExecutionPrevention>
+      <TargetMachine>MachineX86</TargetMachine>
+    </Link>
+  </ItemDefinitionGroup>
+  <ItemDefinitionGroup Condition="'$(Configuration)|$(Platform)'=='Debug|x64'">
+    <ClCompile>
+      <AdditionalIncludeDirectories>..\..\..;%(AdditionalIncludeDirectories)</AdditionalIncludeDirectories>
+      <PreprocessorDefinitions>ASMV;ASMINF;WIN32;ZLIB_WINAPI;_DEBUG;_CONSOLE;_CRT_NONSTDC_NO_DEPRECATE;_CRT_SECURE_NO_DEPRECATE;_CRT_NONSTDC_NO_WARNINGS;%(PreprocessorDefinitions)</PreprocessorDefinitions>
+      <BasicRuntimeChecks>Default</BasicRuntimeChecks>
+      <RuntimeLibrary>MultiThreadedDebugDLL</RuntimeLibrary>
+      <BufferSecurityCheck>false</BufferSecurityCheck>
+      <AssemblerListingLocation>$(IntDir)</AssemblerListingLocation>
+    </ClCompile>
+    <Link>
+      <AdditionalDependencies>..\..\masmx64\gvmat64.obj;..\..\masmx64\inffasx64.obj;%(AdditionalDependencies)</AdditionalDependencies>
+    </Link>
+  </ItemDefinitionGroup>
+  <ItemDefinitionGroup Condition="'$(Configuration)|$(Platform)'=='Debug|Itanium'">
+    <Midl>
+      <TargetEnvironment>Itanium</TargetEnvironment>
+    </Midl>
+    <ClCompile>
+      <Optimization>Disabled</Optimization>
+      <AdditionalIncludeDirectories>..\..\..;%(AdditionalIncludeDirectories)</AdditionalIncludeDirectories>
+      <PreprocessorDefinitions>ZLIB_WINAPI;_DEBUG;_CONSOLE;_CRT_NONSTDC_NO_DEPRECATE;_CRT_SECURE_NO_DEPRECATE;_CRT_NONSTDC_NO_WARNINGS;WIN64;%(PreprocessorDefinitions)</PreprocessorDefinitions>
+      <MinimalRebuild>true</MinimalRebuild>
+      <BasicRuntimeChecks>Default</BasicRuntimeChecks>
+      <RuntimeLibrary>MultiThreadedDebugDLL</RuntimeLibrary>
+      <BufferSecurityCheck>false</BufferSecurityCheck>
+      <PrecompiledHeader>
+      </PrecompiledHeader>
+      <AssemblerOutput>AssemblyAndSourceCode</AssemblerOutput>
+      <AssemblerListingLocation>$(IntDir)</AssemblerListingLocation>
+      <WarningLevel>Level3</WarningLevel>
+      <DebugInformationFormat>ProgramDatabase</DebugInformationFormat>
+    </ClCompile>
+    <Link>
+      <OutputFile>$(OutDir)testzlib.exe</OutputFile>
+      <GenerateDebugInformation>true</GenerateDebugInformation>
+      <ProgramDatabaseFile>$(OutDir)testzlib.pdb</ProgramDatabaseFile>
+      <SubSystem>Console</SubSystem>
+      <TargetMachine>MachineIA64</TargetMachine>
+    </Link>
+  </ItemDefinitionGroup>
+  <ItemDefinitionGroup Condition="'$(Configuration)|$(Platform)'=='ReleaseWithoutAsm|x64'">
+    <ClCompile>
+      <AdditionalIncludeDirectories>..\..\..;%(AdditionalIncludeDirectories)</AdditionalIncludeDirectories>
+      <PreprocessorDefinitions>WIN32;ZLIB_WINAPI;NDEBUG;_CONSOLE;_CRT_NONSTDC_NO_DEPRECATE;_CRT_SECURE_NO_DEPRECATE;_CRT_NONSTDC_NO_WARNINGS;%(PreprocessorDefinitions)</PreprocessorDefinitions>
+      <BasicRuntimeChecks>Default</BasicRuntimeChecks>
+      <RuntimeLibrary>MultiThreadedDLL</RuntimeLibrary>
+      <BufferSecurityCheck>false</BufferSecurityCheck>
+      <AssemblerListingLocation>$(IntDir)</AssemblerListingLocation>
+    </ClCompile>
+    <Link>
+      <AdditionalDependencies>%(AdditionalDependencies)</AdditionalDependencies>
+    </Link>
+  </ItemDefinitionGroup>
+  <ItemDefinitionGroup Condition="'$(Configuration)|$(Platform)'=='ReleaseWithoutAsm|Itanium'">
+    <Midl>
+      <TargetEnvironment>Itanium</TargetEnvironment>
+    </Midl>
+    <ClCompile>
+      <Optimization>MaxSpeed</Optimization>
+      <InlineFunctionExpansion>OnlyExplicitInline</InlineFunctionExpansion>
+      <OmitFramePointers>true</OmitFramePointers>
+      <AdditionalIncludeDirectories>..\..\..;%(AdditionalIncludeDirectories)</AdditionalIncludeDirectories>
+      <PreprocessorDefinitions>ZLIB_WINAPI;NDEBUG;_CONSOLE;_CRT_NONSTDC_NO_DEPRECATE;_CRT_SECURE_NO_DEPRECATE;_CRT_NONSTDC_NO_WARNINGS;WIN64;%(PreprocessorDefinitions)</PreprocessorDefinitions>
+      <StringPooling>true</StringPooling>
+      <BasicRuntimeChecks>Default</BasicRuntimeChecks>
+      <RuntimeLibrary>MultiThreadedDLL</RuntimeLibrary>
+      <BufferSecurityCheck>false</BufferSecurityCheck>
+      <FunctionLevelLinking>true</FunctionLevelLinking>
+      <PrecompiledHeader>
+      </PrecompiledHeader>
+      <AssemblerListingLocation>$(IntDir)</AssemblerListingLocation>
+      <WarningLevel>Level3</WarningLevel>
+      <DebugInformationFormat>ProgramDatabase</DebugInformationFormat>
+    </ClCompile>
+    <Link>
+      <OutputFile>$(OutDir)testzlib.exe</OutputFile>
+      <GenerateDebugInformation>true</GenerateDebugInformation>
+      <SubSystem>Console</SubSystem>
+      <OptimizeReferences>true</OptimizeReferences>
+      <EnableCOMDATFolding>true</EnableCOMDATFolding>
+      <TargetMachine>MachineIA64</TargetMachine>
+    </Link>
+  </ItemDefinitionGroup>
+  <ItemDefinitionGroup Condition="'$(Configuration)|$(Platform)'=='Release|x64'">
+    <ClCompile>
+      <AdditionalIncludeDirectories>..\..\..;%(AdditionalIncludeDirectories)</AdditionalIncludeDirectories>
+      <PreprocessorDefinitions>ASMV;ASMINF;WIN32;ZLIB_WINAPI;NDEBUG;_CONSOLE;_CRT_NONSTDC_NO_DEPRECATE;_CRT_SECURE_NO_DEPRECATE;_CRT_NONSTDC_NO_WARNINGS;%(PreprocessorDefinitions)</PreprocessorDefinitions>
+      <BasicRuntimeChecks>Default</BasicRuntimeChecks>
+      <RuntimeLibrary>MultiThreadedDLL</RuntimeLibrary>
+      <BufferSecurityCheck>false</BufferSecurityCheck>
+      <AssemblerListingLocation>$(IntDir)</AssemblerListingLocation>
+    </ClCompile>
+    <Link>
+      <AdditionalDependencies>..\..\masmx64\gvmat64.obj;..\..\masmx64\inffasx64.obj;%(AdditionalDependencies)</AdditionalDependencies>
+    </Link>
+  </ItemDefinitionGroup>
+  <ItemDefinitionGroup Condition="'$(Configuration)|$(Platform)'=='Release|Itanium'">
+    <Midl>
+      <TargetEnvironment>Itanium</TargetEnvironment>
+    </Midl>
+    <ClCompile>
+      <Optimization>MaxSpeed</Optimization>
+      <InlineFunctionExpansion>OnlyExplicitInline</InlineFunctionExpansion>
+      <OmitFramePointers>true</OmitFramePointers>
+      <AdditionalIncludeDirectories>..\..\..;%(AdditionalIncludeDirectories)</AdditionalIncludeDirectories>
+      <PreprocessorDefinitions>ZLIB_WINAPI;NDEBUG;_CONSOLE;_CRT_NONSTDC_NO_DEPRECATE;_CRT_SECURE_NO_DEPRECATE;_CRT_NONSTDC_NO_WARNINGS;WIN64;%(PreprocessorDefinitions)</PreprocessorDefinitions>
+      <StringPooling>true</StringPooling>
+      <BasicRuntimeChecks>Default</BasicRuntimeChecks>
+      <RuntimeLibrary>MultiThreadedDLL</RuntimeLibrary>
+      <BufferSecurityCheck>false</BufferSecurityCheck>
+      <FunctionLevelLinking>true</FunctionLevelLinking>
+      <PrecompiledHeader>
+      </PrecompiledHeader>
+      <AssemblerListingLocation>$(IntDir)</AssemblerListingLocation>
+      <WarningLevel>Level3</WarningLevel>
+      <DebugInformationFormat>ProgramDatabase</DebugInformationFormat>
+    </ClCompile>
+    <Link>
+      <OutputFile>$(OutDir)testzlib.exe</OutputFile>
+      <GenerateDebugInformation>true</GenerateDebugInformation>
+      <SubSystem>Console</SubSystem>
+      <OptimizeReferences>true</OptimizeReferences>
+      <EnableCOMDATFolding>true</EnableCOMDATFolding>
+      <TargetMachine>MachineIA64</TargetMachine>
+    </Link>
+  </ItemDefinitionGroup>
+  <ItemGroup>
+    <ClCompile Include="..\..\..\adler32.c" />
+    <ClCompile Include="..\..\..\compress.c" />
+    <ClCompile Include="..\..\..\crc32.c" />
+    <ClCompile Include="..\..\..\deflate.c" />
+    <ClCompile Include="..\..\..\infback.c" />
+    <ClCompile Include="..\..\masmx64\inffas8664.c">
+      <ExcludedFromBuild Condition="'$(Configuration)|$(Platform)'=='Debug|Itanium'">true</ExcludedFromBuild>
+      <ExcludedFromBuild Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'">true</ExcludedFromBuild>
+      <ExcludedFromBuild Condition="'$(Configuration)|$(Platform)'=='ReleaseWithoutAsm|Itanium'">true</ExcludedFromBuild>
+      <ExcludedFromBuild Condition="'$(Configuration)|$(Platform)'=='ReleaseWithoutAsm|Win32'">true</ExcludedFromBuild>
+      <ExcludedFromBuild Condition="'$(Configuration)|$(Platform)'=='Release|Itanium'">true</ExcludedFromBuild>
+      <ExcludedFromBuild Condition="'$(Configuration)|$(Platform)'=='Release|Win32'">true</ExcludedFromBuild>
+    </ClCompile>
+    <ClCompile Include="..\..\..\inffast.c" />
+    <ClCompile Include="..\..\..\inflate.c" />
+    <ClCompile Include="..\..\..\inftrees.c" />
+    <ClCompile Include="..\..\testzlib\testzlib.c" />
+    <ClCompile Include="..\..\..\trees.c" />
+    <ClCompile Include="..\..\..\uncompr.c" />
+    <ClCompile Include="..\..\..\zutil.c" />
+  </ItemGroup>
+  <Import Project="$(VCTargetsPath)\Microsoft.Cpp.targets" />
+  <ImportGroup Label="ExtensionTargets">
+  </ImportGroup>
+</Project>

contrib/vstudio/vc10/testzlib.vcxproj.filters

@@ -0,0 +1,58 @@
+<?xml version="1.0" encoding="utf-8"?>
+<Project ToolsVersion="4.0" xmlns="http://schemas.microsoft.com/developer/msbuild/2003">
+  <ItemGroup>
+    <Filter Include="Source Files">
+      <UniqueIdentifier>{c1f6a2e3-5da5-4955-8653-310d3efe05a9}</UniqueIdentifier>
+      <Extensions>cpp;c;cxx;def;odl;idl;hpj;bat;asm</Extensions>
+    </Filter>
+    <Filter Include="Header Files">
+      <UniqueIdentifier>{c2aaffdc-2c95-4d6f-8466-4bec5890af2c}</UniqueIdentifier>
+      <Extensions>h;hpp;hxx;hm;inl;inc</Extensions>
+    </Filter>
+    <Filter Include="Resource Files">
+      <UniqueIdentifier>{c274fe07-05f2-461c-964b-f6341e4e7eb5}</UniqueIdentifier>
+      <Extensions>rc;ico;cur;bmp;dlg;rc2;rct;bin;rgs;gif;jpg;jpeg;jpe</Extensions>
+    </Filter>
+  </ItemGroup>
+  <ItemGroup>
+    <ClCompile Include="..\..\..\adler32.c">
+      <Filter>Source Files</Filter>
+    </ClCompile>
+    <ClCompile Include="..\..\..\compress.c">
+      <Filter>Source Files</Filter>
+    </ClCompile>
+    <ClCompile Include="..\..\..\crc32.c">
+      <Filter>Source Files</Filter>
+    </ClCompile>
+    <ClCompile Include="..\..\..\deflate.c">
+      <Filter>Source Files</Filter>
+    </ClCompile>
+    <ClCompile Include="..\..\..\infback.c">
+      <Filter>Source Files</Filter>
+    </ClCompile>
+    <ClCompile Include="..\..\masmx64\inffas8664.c">
+      <Filter>Source Files</Filter>
+    </ClCompile>
+    <ClCompile Include="..\..\..\inffast.c">
+      <Filter>Source Files</Filter>
+    </ClCompile>
+    <ClCompile Include="..\..\..\inflate.c">
+      <Filter>Source Files</Filter>
+    </ClCompile>
+    <ClCompile Include="..\..\..\inftrees.c">
+      <Filter>Source Files</Filter>
+    </ClCompile>
+    <ClCompile Include="..\..\testzlib\testzlib.c">
+      <Filter>Source Files</Filter>
+    </ClCompile>
+    <ClCompile Include="..\..\..\trees.c">
+      <Filter>Source Files</Filter>
+    </ClCompile>
+    <ClCompile Include="..\..\..\uncompr.c">
+      <Filter>Source Files</Filter>
+    </ClCompile>
+    <ClCompile Include="..\..\..\zutil.c">
+      <Filter>Source Files</Filter>
+    </ClCompile>
+  </ItemGroup>
+</Project>

contrib/vstudio/vc10/testzlib.vcxproj.user

@@ -0,0 +1,3 @@
+<?xml version="1.0" encoding="utf-8"?>
+<Project ToolsVersion="4.0" xmlns="http://schemas.microsoft.com/developer/msbuild/2003">
+</Project>

contrib/vstudio/vc10/testzlibdll.vcxproj

@@ -0,0 +1,310 @@
+<?xml version="1.0" encoding="utf-8"?>
+<Project DefaultTargets="Build" ToolsVersion="4.0" xmlns="http://schemas.microsoft.com/developer/msbuild/2003">
+  <ItemGroup Label="ProjectConfigurations">
+    <ProjectConfiguration Include="Debug|Itanium">
+      <Configuration>Debug</Configuration>
+      <Platform>Itanium</Platform>
+    </ProjectConfiguration>
+    <ProjectConfiguration Include="Debug|Win32">
+      <Configuration>Debug</Configuration>
+      <Platform>Win32</Platform>
+    </ProjectConfiguration>
+    <ProjectConfiguration Include="Debug|x64">
+      <Configuration>Debug</Configuration>
+      <Platform>x64</Platform>
+    </ProjectConfiguration>
+    <ProjectConfiguration Include="Release|Itanium">
+      <Configuration>Release</Configuration>
+      <Platform>Itanium</Platform>
+    </ProjectConfiguration>
+    <ProjectConfiguration Include="Release|Win32">
+      <Configuration>Release</Configuration>
+      <Platform>Win32</Platform>
+    </ProjectConfiguration>
+    <ProjectConfiguration Include="Release|x64">
+      <Configuration>Release</Configuration>
+      <Platform>x64</Platform>
+    </ProjectConfiguration>
+  </ItemGroup>
+  <PropertyGroup Label="Globals">
+    <ProjectGuid>{C52F9E7B-498A-42BE-8DB4-85A15694366A}</ProjectGuid>
+    <Keyword>Win32Proj</Keyword>
+  </PropertyGroup>
+  <Import Project="$(VCTargetsPath)\Microsoft.Cpp.Default.props" />
+  <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Release|Win32'" Label="Configuration">
+    <ConfigurationType>Application</ConfigurationType>
+    <CharacterSet>MultiByte</CharacterSet>
+  </PropertyGroup>
+  <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'" Label="Configuration">
+    <ConfigurationType>Application</ConfigurationType>
+    <CharacterSet>MultiByte</CharacterSet>
+  </PropertyGroup>
+  <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Release|Itanium'" Label="Configuration">
+    <ConfigurationType>Application</ConfigurationType>
+    <CharacterSet>MultiByte</CharacterSet>
+  </PropertyGroup>
+  <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Debug|Itanium'" Label="Configuration">
+    <ConfigurationType>Application</ConfigurationType>
+    <CharacterSet>MultiByte</CharacterSet>
+  </PropertyGroup>
+  <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Release|x64'" Label="Configuration">
+    <ConfigurationType>Application</ConfigurationType>
+    <CharacterSet>MultiByte</CharacterSet>
+  </PropertyGroup>
+  <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Debug|x64'" Label="Configuration">
+    <ConfigurationType>Application</ConfigurationType>
+    <CharacterSet>MultiByte</CharacterSet>
+  </PropertyGroup>
+  <Import Project="$(VCTargetsPath)\Microsoft.Cpp.props" />
+  <ImportGroup Label="ExtensionSettings">
+  </ImportGroup>
+  <ImportGroup Condition="'$(Configuration)|$(Platform)'=='Release|Win32'" Label="PropertySheets">
+    <Import Project="$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props" Condition="exists('$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props')" Label="LocalAppDataPlatform" />
+  </ImportGroup>
+  <ImportGroup Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'" Label="PropertySheets">
+    <Import Project="$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props" Condition="exists('$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props')" Label="LocalAppDataPlatform" />
+  </ImportGroup>
+  <ImportGroup Condition="'$(Configuration)|$(Platform)'=='Release|Itanium'" Label="PropertySheets">
+    <Import Project="$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props" Condition="exists('$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props')" Label="LocalAppDataPlatform" />
+  </ImportGroup>
+  <ImportGroup Condition="'$(Configuration)|$(Platform)'=='Debug|Itanium'" Label="PropertySheets">
+    <Import Project="$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props" Condition="exists('$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props')" Label="LocalAppDataPlatform" />
+  </ImportGroup>
+  <ImportGroup Condition="'$(Configuration)|$(Platform)'=='Release|x64'" Label="PropertySheets">
+    <Import Project="$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props" Condition="exists('$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props')" Label="LocalAppDataPlatform" />
+  </ImportGroup>
+  <ImportGroup Condition="'$(Configuration)|$(Platform)'=='Debug|x64'" Label="PropertySheets">
+    <Import Project="$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props" Condition="exists('$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props')" Label="LocalAppDataPlatform" />
+  </ImportGroup>
+  <PropertyGroup Label="UserMacros" />
+  <PropertyGroup>
+    <_ProjectFileVersion>10.0.30128.1</_ProjectFileVersion>
+    <OutDir Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'">x86\TestZlibDll$(Configuration)\</OutDir>
+    <IntDir Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'">x86\TestZlibDll$(Configuration)\Tmp\</IntDir>
+    <LinkIncremental Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'">true</LinkIncremental>
+    <GenerateManifest Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'">false</GenerateManifest>
+    <OutDir Condition="'$(Configuration)|$(Platform)'=='Release|Win32'">x86\TestZlibDll$(Configuration)\</OutDir>
+    <IntDir Condition="'$(Configuration)|$(Platform)'=='Release|Win32'">x86\TestZlibDll$(Configuration)\Tmp\</IntDir>
+    <LinkIncremental Condition="'$(Configuration)|$(Platform)'=='Release|Win32'">false</LinkIncremental>
+    <GenerateManifest Condition="'$(Configuration)|$(Platform)'=='Release|Win32'">false</GenerateManifest>
+    <OutDir Condition="'$(Configuration)|$(Platform)'=='Debug|x64'">x64\TestZlibDll$(Configuration)\</OutDir>
+    <IntDir Condition="'$(Configuration)|$(Platform)'=='Debug|x64'">x64\TestZlibDll$(Configuration)\Tmp\</IntDir>
+    <LinkIncremental Condition="'$(Configuration)|$(Platform)'=='Debug|x64'">true</LinkIncremental>
+    <GenerateManifest Condition="'$(Configuration)|$(Platform)'=='Debug|x64'">false</GenerateManifest>
+    <OutDir Condition="'$(Configuration)|$(Platform)'=='Debug|Itanium'">ia64\TestZlibDll$(Configuration)\</OutDir>
+    <IntDir Condition="'$(Configuration)|$(Platform)'=='Debug|Itanium'">ia64\TestZlibDll$(Configuration)\Tmp\</IntDir>
+    <LinkIncremental Condition="'$(Configuration)|$(Platform)'=='Debug|Itanium'">true</LinkIncremental>
+    <GenerateManifest Condition="'$(Configuration)|$(Platform)'=='Debug|Itanium'">false</GenerateManifest>
+    <OutDir Condition="'$(Configuration)|$(Platform)'=='Release|x64'">x64\TestZlibDll$(Configuration)\</OutDir>
+    <IntDir Condition="'$(Configuration)|$(Platform)'=='Release|x64'">x64\TestZlibDll$(Configuration)\Tmp\</IntDir>
+    <LinkIncremental Condition="'$(Configuration)|$(Platform)'=='Release|x64'">false</LinkIncremental>
+    <GenerateManifest Condition="'$(Configuration)|$(Platform)'=='Release|x64'">false</GenerateManifest>
+    <OutDir Condition="'$(Configuration)|$(Platform)'=='Release|Itanium'">ia64\TestZlibDll$(Configuration)\</OutDir>
+    <IntDir Condition="'$(Configuration)|$(Platform)'=='Release|Itanium'">ia64\TestZlibDll$(Configuration)\Tmp\</IntDir>
+    <LinkIncremental Condition="'$(Configuration)|$(Platform)'=='Release|Itanium'">false</LinkIncremental>
+    <GenerateManifest Condition="'$(Configuration)|$(Platform)'=='Release|Itanium'">false</GenerateManifest>
+    <CodeAnalysisRuleSet Condition="'$(Configuration)|$(Platform)'=='Debug|Itanium'">AllRules.ruleset</CodeAnalysisRuleSet>
+    <CodeAnalysisRules Condition="'$(Configuration)|$(Platform)'=='Debug|Itanium'" />
+    <CodeAnalysisRuleAssemblies Condition="'$(Configuration)|$(Platform)'=='Debug|Itanium'" />
+    <CodeAnalysisRuleSet Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'">AllRules.ruleset</CodeAnalysisRuleSet>
+    <CodeAnalysisRules Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'" />
+    <CodeAnalysisRuleAssemblies Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'" />
+    <CodeAnalysisRuleSet Condition="'$(Configuration)|$(Platform)'=='Debug|x64'">AllRules.ruleset</CodeAnalysisRuleSet>
+    <CodeAnalysisRules Condition="'$(Configuration)|$(Platform)'=='Debug|x64'" />
+    <CodeAnalysisRuleAssemblies Condition="'$(Configuration)|$(Platform)'=='Debug|x64'" />
+    <CodeAnalysisRuleSet Condition="'$(Configuration)|$(Platform)'=='Release|Itanium'">AllRules.ruleset</CodeAnalysisRuleSet>
+    <CodeAnalysisRules Condition="'$(Configuration)|$(Platform)'=='Release|Itanium'" />
+    <CodeAnalysisRuleAssemblies Condition="'$(Configuration)|$(Platform)'=='Release|Itanium'" />
+    <CodeAnalysisRuleSet Condition="'$(Configuration)|$(Platform)'=='Release|Win32'">AllRules.ruleset</CodeAnalysisRuleSet>
+    <CodeAnalysisRules Condition="'$(Configuration)|$(Platform)'=='Release|Win32'" />
+    <CodeAnalysisRuleAssemblies Condition="'$(Configuration)|$(Platform)'=='Release|Win32'" />
+    <CodeAnalysisRuleSet Condition="'$(Configuration)|$(Platform)'=='Release|x64'">AllRules.ruleset</CodeAnalysisRuleSet>
+    <CodeAnalysisRules Condition="'$(Configuration)|$(Platform)'=='Release|x64'" />
+    <CodeAnalysisRuleAssemblies Condition="'$(Configuration)|$(Platform)'=='Release|x64'" />
+  </PropertyGroup>
+  <ItemDefinitionGroup Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'">
+    <ClCompile>
+      <Optimization>Disabled</Optimization>
+      <AdditionalIncludeDirectories>..\..\..;..\..\minizip;%(AdditionalIncludeDirectories)</AdditionalIncludeDirectories>
+      <PreprocessorDefinitions>WIN32;_CRT_NONSTDC_NO_DEPRECATE;_CRT_SECURE_NO_DEPRECATE;ZLIB_WINAPI;_DEBUG;_CONSOLE;%(PreprocessorDefinitions)</PreprocessorDefinitions>
+      <MinimalRebuild>true</MinimalRebuild>
+      <BasicRuntimeChecks>Default</BasicRuntimeChecks>
+      <RuntimeLibrary>MultiThreadedDebug</RuntimeLibrary>
+      <BufferSecurityCheck>false</BufferSecurityCheck>
+      <PrecompiledHeader>
+      </PrecompiledHeader>
+      <AssemblerListingLocation>$(IntDir)</AssemblerListingLocation>
+      <WarningLevel>Level3</WarningLevel>
+      <DebugInformationFormat>EditAndContinue</DebugInformationFormat>
+    </ClCompile>
+    <Link>
+      <AdditionalDependencies>x86\ZlibDllDebug\zlibwapi.lib;%(AdditionalDependencies)</AdditionalDependencies>
+      <OutputFile>$(OutDir)testzlib.exe</OutputFile>
+      <GenerateDebugInformation>true</GenerateDebugInformation>
+      <ProgramDatabaseFile>$(OutDir)testzlib.pdb</ProgramDatabaseFile>
+      <SubSystem>Console</SubSystem>
+      <RandomizedBaseAddress>false</RandomizedBaseAddress>
+      <DataExecutionPrevention>
+      </DataExecutionPrevention>
+      <TargetMachine>MachineX86</TargetMachine>
+    </Link>
+  </ItemDefinitionGroup>
+  <ItemDefinitionGroup Condition="'$(Configuration)|$(Platform)'=='Release|Win32'">
+    <ClCompile>
+      <Optimization>MaxSpeed</Optimization>
+      <InlineFunctionExpansion>OnlyExplicitInline</InlineFunctionExpansion>
+      <OmitFramePointers>true</OmitFramePointers>
+      <AdditionalIncludeDirectories>..\..\..;..\..\minizip;%(AdditionalIncludeDirectories)</AdditionalIncludeDirectories>
+      <PreprocessorDefinitions>WIN32;_CRT_NONSTDC_NO_DEPRECATE;_CRT_SECURE_NO_DEPRECATE;ZLIB_WINAPI;NDEBUG;_CONSOLE;%(PreprocessorDefinitions)</PreprocessorDefinitions>
+      <StringPooling>true</StringPooling>
+      <BasicRuntimeChecks>Default</BasicRuntimeChecks>
+      <RuntimeLibrary>MultiThreaded</RuntimeLibrary>
+      <BufferSecurityCheck>false</BufferSecurityCheck>
+      <FunctionLevelLinking>true</FunctionLevelLinking>
+      <PrecompiledHeader>
+      </PrecompiledHeader>
+      <AssemblerListingLocation>$(IntDir)</AssemblerListingLocation>
+      <WarningLevel>Level3</WarningLevel>
+      <DebugInformationFormat>ProgramDatabase</DebugInformationFormat>
+    </ClCompile>
+    <Link>
+      <AdditionalDependencies>x86\ZlibDllRelease\zlibwapi.lib;%(AdditionalDependencies)</AdditionalDependencies>
+      <OutputFile>$(OutDir)testzlib.exe</OutputFile>
+      <GenerateDebugInformation>true</GenerateDebugInformation>
+      <SubSystem>Console</SubSystem>
+      <OptimizeReferences>true</OptimizeReferences>
+      <EnableCOMDATFolding>true</EnableCOMDATFolding>
+      <RandomizedBaseAddress>false</RandomizedBaseAddress>
+      <DataExecutionPrevention>
+      </DataExecutionPrevention>
+      <TargetMachine>MachineX86</TargetMachine>
+    </Link>
+  </ItemDefinitionGroup>
+  <ItemDefinitionGroup Condition="'$(Configuration)|$(Platform)'=='Debug|x64'">
+    <Midl>
+      <TargetEnvironment>X64</TargetEnvironment>
+    </Midl>
+    <ClCompile>
+      <Optimization>Disabled</Optimization>
+      <AdditionalIncludeDirectories>..\..\..;..\..\minizip;%(AdditionalIncludeDirectories)</AdditionalIncludeDirectories>
+      <PreprocessorDefinitions>_CRT_NONSTDC_NO_DEPRECATE;_CRT_SECURE_NO_DEPRECATE;ZLIB_WINAPI;_DEBUG;_CONSOLE;WIN64;%(PreprocessorDefinitions)</PreprocessorDefinitions>
+      <MinimalRebuild>true</MinimalRebuild>
+      <BasicRuntimeChecks>Default</BasicRuntimeChecks>
+      <RuntimeLibrary>MultiThreadedDebugDLL</RuntimeLibrary>
+      <BufferSecurityCheck>false</BufferSecurityCheck>
+      <PrecompiledHeader>
+      </PrecompiledHeader>
+      <AssemblerListingLocation>$(IntDir)</AssemblerListingLocation>
+      <WarningLevel>Level3</WarningLevel>
+      <DebugInformationFormat>ProgramDatabase</DebugInformationFormat>
+    </ClCompile>
+    <Link>
+      <AdditionalDependencies>x64\ZlibDllDebug\zlibwapi.lib;%(AdditionalDependencies)</AdditionalDependencies>
+      <OutputFile>$(OutDir)testzlib.exe</OutputFile>
+      <GenerateDebugInformation>true</GenerateDebugInformation>
+      <ProgramDatabaseFile>$(OutDir)testzlib.pdb</ProgramDatabaseFile>
+      <SubSystem>Console</SubSystem>
+      <TargetMachine>MachineX64</TargetMachine>
+    </Link>
+  </ItemDefinitionGroup>
+  <ItemDefinitionGroup Condition="'$(Configuration)|$(Platform)'=='Debug|Itanium'">
+    <Midl>
+      <TargetEnvironment>Itanium</TargetEnvironment>
+    </Midl>
+    <ClCompile>
+      <Optimization>Disabled</Optimization>
+      <AdditionalIncludeDirectories>..\..\..;..\..\minizip;%(AdditionalIncludeDirectories)</AdditionalIncludeDirectories>
+      <PreprocessorDefinitions>_CRT_NONSTDC_NO_DEPRECATE;_CRT_SECURE_NO_DEPRECATE;ZLIB_WINAPI;_DEBUG;_CONSOLE;WIN64;%(PreprocessorDefinitions)</PreprocessorDefinitions>
+      <MinimalRebuild>true</MinimalRebuild>
+      <BasicRuntimeChecks>Default</BasicRuntimeChecks>
+      <RuntimeLibrary>MultiThreadedDebugDLL</RuntimeLibrary>
+      <BufferSecurityCheck>false</BufferSecurityCheck>
+      <PrecompiledHeader>
+      </PrecompiledHeader>
+      <AssemblerListingLocation>$(IntDir)</AssemblerListingLocation>
+      <WarningLevel>Level3</WarningLevel>
+      <DebugInformationFormat>ProgramDatabase</DebugInformationFormat>
+    </ClCompile>
+    <Link>
+      <AdditionalDependencies>ia64\ZlibDllDebug\zlibwapi.lib;%(AdditionalDependencies)</AdditionalDependencies>
+      <OutputFile>$(OutDir)testzlib.exe</OutputFile>
+      <GenerateDebugInformation>true</GenerateDebugInformation>
+      <ProgramDatabaseFile>$(OutDir)testzlib.pdb</ProgramDatabaseFile>
+      <SubSystem>Console</SubSystem>
+      <TargetMachine>MachineIA64</TargetMachine>
+    </Link>
+  </ItemDefinitionGroup>
+  <ItemDefinitionGroup Condition="'$(Configuration)|$(Platform)'=='Release|x64'">
+    <Midl>
+      <TargetEnvironment>X64</TargetEnvironment>
+    </Midl>
+    <ClCompile>
+      <Optimization>MaxSpeed</Optimization>
+      <InlineFunctionExpansion>OnlyExplicitInline</InlineFunctionExpansion>
+      <OmitFramePointers>true</OmitFramePointers>
+      <AdditionalIncludeDirectories>..\..\..;..\..\minizip;%(AdditionalIncludeDirectories)</AdditionalIncludeDirectories>
+      <PreprocessorDefinitions>_CRT_NONSTDC_NO_DEPRECATE;_CRT_SECURE_NO_DEPRECATE;ZLIB_WINAPI;NDEBUG;_CONSOLE;WIN64;%(PreprocessorDefinitions)</PreprocessorDefinitions>
+      <StringPooling>true</StringPooling>
+      <BasicRuntimeChecks>Default</BasicRuntimeChecks>
+      <RuntimeLibrary>MultiThreadedDLL</RuntimeLibrary>
+      <BufferSecurityCheck>false</BufferSecurityCheck>
+      <FunctionLevelLinking>true</FunctionLevelLinking>
+      <PrecompiledHeader>
+      </PrecompiledHeader>
+      <AssemblerListingLocation>$(IntDir)</AssemblerListingLocation>
+      <WarningLevel>Level3</WarningLevel>
+      <DebugInformationFormat>ProgramDatabase</DebugInformationFormat>
+    </ClCompile>
+    <Link>
+      <AdditionalDependencies>x64\ZlibDllRelease\zlibwapi.lib;%(AdditionalDependencies)</AdditionalDependencies>
+      <OutputFile>$(OutDir)testzlib.exe</OutputFile>
+      <GenerateDebugInformation>true</GenerateDebugInformation>
+      <SubSystem>Console</SubSystem>
+      <OptimizeReferences>true</OptimizeReferences>
+      <EnableCOMDATFolding>true</EnableCOMDATFolding>
+      <TargetMachine>MachineX64</TargetMachine>
+    </Link>
+  </ItemDefinitionGroup>
+  <ItemDefinitionGroup Condition="'$(Configuration)|$(Platform)'=='Release|Itanium'">
+    <Midl>
+      <TargetEnvironment>Itanium</TargetEnvironment>
+    </Midl>
+    <ClCompile>
+      <Optimization>MaxSpeed</Optimization>
+      <InlineFunctionExpansion>OnlyExplicitInline</InlineFunctionExpansion>
+      <OmitFramePointers>true</OmitFramePointers>
+      <AdditionalIncludeDirectories>..\..\..;..\..\minizip;%(AdditionalIncludeDirectories)</AdditionalIncludeDirectories>
+      <PreprocessorDefinitions>_CRT_NONSTDC_NO_DEPRECATE;_CRT_SECURE_NO_DEPRECATE;ZLIB_WINAPI;NDEBUG;_CONSOLE;WIN64;%(PreprocessorDefinitions)</PreprocessorDefinitions>
+      <StringPooling>true</StringPooling>
+      <BasicRuntimeChecks>Default</BasicRuntimeChecks>
+      <RuntimeLibrary>MultiThreadedDLL</RuntimeLibrary>
+      <BufferSecurityCheck>false</BufferSecurityCheck>
+      <FunctionLevelLinking>true</FunctionLevelLinking>
+      <PrecompiledHeader>
+      </PrecompiledHeader>
+      <AssemblerListingLocation>$(IntDir)</AssemblerListingLocation>
+      <WarningLevel>Level3</WarningLevel>
+      <DebugInformationFormat>ProgramDatabase</DebugInformationFormat>
+    </ClCompile>
+    <Link>
+      <AdditionalDependencies>ia64\ZlibDllRelease\zlibwapi.lib;%(AdditionalDependencies)</AdditionalDependencies>
+      <OutputFile>$(OutDir)testzlib.exe</OutputFile>
+      <GenerateDebugInformation>true</GenerateDebugInformation>
+      <SubSystem>Console</SubSystem>
+      <OptimizeReferences>true</OptimizeReferences>
+      <EnableCOMDATFolding>true</EnableCOMDATFolding>
+      <TargetMachine>MachineIA64</TargetMachine>
+    </Link>
+  </ItemDefinitionGroup>
+  <ItemGroup>
+    <ClCompile Include="..\..\testzlib\testzlib.c" />
+  </ItemGroup>
+  <ItemGroup>
+    <ProjectReference Include="zlibvc.vcxproj">
+      <Project>{8fd826f8-3739-44e6-8cc8-997122e53b8d}</Project>
+    </ProjectReference>
+  </ItemGroup>
+  <Import Project="$(VCTargetsPath)\Microsoft.Cpp.targets" />
+  <ImportGroup Label="ExtensionTargets">
+  </ImportGroup>
+</Project>

contrib/vstudio/vc10/testzlibdll.vcxproj.filters

@@ -0,0 +1,22 @@
+<?xml version="1.0" encoding="utf-8"?>
+<Project ToolsVersion="4.0" xmlns="http://schemas.microsoft.com/developer/msbuild/2003">
+  <ItemGroup>
+    <Filter Include="Source Files">
+      <UniqueIdentifier>{fa61a89f-93fc-4c89-b29e-36224b7592f4}</UniqueIdentifier>
+      <Extensions>cpp;c;cxx;def;odl;idl;hpj;bat;asm</Extensions>
+    </Filter>
+    <Filter Include="Header Files">
+      <UniqueIdentifier>{d4b85da0-2ba2-4934-b57f-e2584e3848ee}</UniqueIdentifier>
+      <Extensions>h;hpp;hxx;hm;inl;inc</Extensions>
+    </Filter>
+    <Filter Include="Resource Files">
+      <UniqueIdentifier>{e573e075-00bd-4a7d-bd67-a8cc9bfc5aca}</UniqueIdentifier>
+      <Extensions>rc;ico;cur;bmp;dlg;rc2;rct;bin;rgs;gif;jpg;jpeg;jpe</Extensions>
+    </Filter>
+  </ItemGroup>
+  <ItemGroup>
+    <ClCompile Include="..\..\testzlib\testzlib.c">
+      <Filter>Source Files</Filter>
+    </ClCompile>
+  </ItemGroup>
+</Project>

contrib/vstudio/vc10/testzlibdll.vcxproj.user

@@ -0,0 +1,3 @@
+<?xml version="1.0" encoding="utf-8"?>
+<Project ToolsVersion="4.0" xmlns="http://schemas.microsoft.com/developer/msbuild/2003">
+</Project>

contrib/vstudio/vc10/zlib.rc

@@ -2,8 +2,8 @@
 
 #define IDR_VERSION1  1
 IDR_VERSION1	VERSIONINFO	MOVEABLE IMPURE LOADONCALL DISCARDABLE
-  FILEVERSION	 1,2,3,6
+  FILEVERSION	 1.2.5.1,1
-  PRODUCTVERSION 1,2,3,6
+  PRODUCTVERSION 1.2.5.1,1
   FILEFLAGSMASK	VS_FFI_FILEFLAGSMASK
   FILEFLAGS	0
   FILEOS	VOS_DOS_WINDOWS32
@@ -16,8 +16,8 @@ BEGIN
     //language ID = U.S. English, char set = Windows, Multilingual
 
     BEGIN
-      VALUE "FileDescription", "zlib data compression library\0"
+      VALUE "FileDescription", "zlib data compression and ZIP file I/O library\0"
-      VALUE "FileVersion",	"1.2.3.6\0"
+      VALUE "FileVersion",	"1.2.5.1\0"
       VALUE "InternalName",	"zlib\0"
       VALUE "OriginalFilename",	"zlib.dll\0"
       VALUE "ProductName",	"ZLib.DLL\0"

contrib/vstudio/vc10/zlibstat.vcxproj

@@ -0,0 +1,457 @@
+<?xml version="1.0" encoding="utf-8"?>
+<Project DefaultTargets="Build" ToolsVersion="4.0" xmlns="http://schemas.microsoft.com/developer/msbuild/2003">
+  <ItemGroup Label="ProjectConfigurations">
+    <ProjectConfiguration Include="Debug|Itanium">
+      <Configuration>Debug</Configuration>
+      <Platform>Itanium</Platform>
+    </ProjectConfiguration>
+    <ProjectConfiguration Include="Debug|Win32">
+      <Configuration>Debug</Configuration>
+      <Platform>Win32</Platform>
+    </ProjectConfiguration>
+    <ProjectConfiguration Include="Debug|x64">
+      <Configuration>Debug</Configuration>
+      <Platform>x64</Platform>
+    </ProjectConfiguration>
+    <ProjectConfiguration Include="ReleaseWithoutAsm|Itanium">
+      <Configuration>ReleaseWithoutAsm</Configuration>
+      <Platform>Itanium</Platform>
+    </ProjectConfiguration>
+    <ProjectConfiguration Include="ReleaseWithoutAsm|Win32">
+      <Configuration>ReleaseWithoutAsm</Configuration>
+      <Platform>Win32</Platform>
+    </ProjectConfiguration>
+    <ProjectConfiguration Include="ReleaseWithoutAsm|x64">
+      <Configuration>ReleaseWithoutAsm</Configuration>
+      <Platform>x64</Platform>
+    </ProjectConfiguration>
+    <ProjectConfiguration Include="Release|Itanium">
+      <Configuration>Release</Configuration>
+      <Platform>Itanium</Platform>
+    </ProjectConfiguration>
+    <ProjectConfiguration Include="Release|Win32">
+      <Configuration>Release</Configuration>
+      <Platform>Win32</Platform>
+    </ProjectConfiguration>
+    <ProjectConfiguration Include="Release|x64">
+      <Configuration>Release</Configuration>
+      <Platform>x64</Platform>
+    </ProjectConfiguration>
+  </ItemGroup>
+  <PropertyGroup Label="Globals">
+    <ProjectGuid>{745DEC58-EBB3-47A9-A9B8-4C6627C01BF8}</ProjectGuid>
+  </PropertyGroup>
+  <Import Project="$(VCTargetsPath)\Microsoft.Cpp.Default.props" />
+  <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='ReleaseWithoutAsm|Win32'" Label="Configuration">
+    <ConfigurationType>StaticLibrary</ConfigurationType>
+    <UseOfMfc>false</UseOfMfc>
+  </PropertyGroup>
+  <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Release|Win32'" Label="Configuration">
+    <ConfigurationType>StaticLibrary</ConfigurationType>
+    <UseOfMfc>false</UseOfMfc>
+  </PropertyGroup>
+  <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'" Label="Configuration">
+    <ConfigurationType>StaticLibrary</ConfigurationType>
+    <UseOfMfc>false</UseOfMfc>
+  </PropertyGroup>
+  <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='ReleaseWithoutAsm|Itanium'" Label="Configuration">
+    <ConfigurationType>StaticLibrary</ConfigurationType>
+    <UseOfMfc>false</UseOfMfc>
+  </PropertyGroup>
+  <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Release|Itanium'" Label="Configuration">
+    <ConfigurationType>StaticLibrary</ConfigurationType>
+    <UseOfMfc>false</UseOfMfc>
+  </PropertyGroup>
+  <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Debug|Itanium'" Label="Configuration">
+    <ConfigurationType>StaticLibrary</ConfigurationType>
+    <UseOfMfc>false</UseOfMfc>
+  </PropertyGroup>
+  <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='ReleaseWithoutAsm|x64'" Label="Configuration">
+    <ConfigurationType>StaticLibrary</ConfigurationType>
+    <UseOfMfc>false</UseOfMfc>
+  </PropertyGroup>
+  <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Release|x64'" Label="Configuration">
+    <ConfigurationType>StaticLibrary</ConfigurationType>
+    <UseOfMfc>false</UseOfMfc>
+  </PropertyGroup>
+  <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Debug|x64'" Label="Configuration">
+    <ConfigurationType>StaticLibrary</ConfigurationType>
+    <UseOfMfc>false</UseOfMfc>
+  </PropertyGroup>
+  <Import Project="$(VCTargetsPath)\Microsoft.Cpp.props" />
+  <ImportGroup Label="ExtensionSettings">
+  </ImportGroup>
+  <ImportGroup Condition="'$(Configuration)|$(Platform)'=='ReleaseWithoutAsm|Win32'" Label="PropertySheets">
+    <Import Project="$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props" Condition="exists('$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props')" Label="LocalAppDataPlatform" />
+  </ImportGroup>
+  <ImportGroup Condition="'$(Configuration)|$(Platform)'=='Release|Win32'" Label="PropertySheets">
+    <Import Project="$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props" Condition="exists('$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props')" Label="LocalAppDataPlatform" />
+  </ImportGroup>
+  <ImportGroup Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'" Label="PropertySheets">
+    <Import Project="$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props" Condition="exists('$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props')" Label="LocalAppDataPlatform" />
+  </ImportGroup>
+  <ImportGroup Condition="'$(Configuration)|$(Platform)'=='ReleaseWithoutAsm|Itanium'" Label="PropertySheets">
+    <Import Project="$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props" Condition="exists('$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props')" Label="LocalAppDataPlatform" />
+  </ImportGroup>
+  <ImportGroup Condition="'$(Configuration)|$(Platform)'=='Release|Itanium'" Label="PropertySheets">
+    <Import Project="$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props" Condition="exists('$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props')" Label="LocalAppDataPlatform" />
+  </ImportGroup>
+  <ImportGroup Condition="'$(Configuration)|$(Platform)'=='Debug|Itanium'" Label="PropertySheets">
+    <Import Project="$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props" Condition="exists('$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props')" Label="LocalAppDataPlatform" />
+  </ImportGroup>
+  <ImportGroup Condition="'$(Configuration)|$(Platform)'=='ReleaseWithoutAsm|x64'" Label="PropertySheets">
+    <Import Project="$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props" Condition="exists('$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props')" Label="LocalAppDataPlatform" />
+  </ImportGroup>
+  <ImportGroup Condition="'$(Configuration)|$(Platform)'=='Release|x64'" Label="PropertySheets">
+    <Import Project="$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props" Condition="exists('$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props')" Label="LocalAppDataPlatform" />
+  </ImportGroup>
+  <ImportGroup Condition="'$(Configuration)|$(Platform)'=='Debug|x64'" Label="PropertySheets">
+    <Import Project="$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props" Condition="exists('$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props')" Label="LocalAppDataPlatform" />
+  </ImportGroup>
+  <PropertyGroup Label="UserMacros" />
+  <PropertyGroup>
+    <_ProjectFileVersion>10.0.30128.1</_ProjectFileVersion>
+    <OutDir Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'">x86\ZlibStat$(Configuration)\</OutDir>
+    <IntDir Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'">x86\ZlibStat$(Configuration)\Tmp\</IntDir>
+    <OutDir Condition="'$(Configuration)|$(Platform)'=='Release|Win32'">x86\ZlibStat$(Configuration)\</OutDir>
+    <IntDir Condition="'$(Configuration)|$(Platform)'=='Release|Win32'">x86\ZlibStat$(Configuration)\Tmp\</IntDir>
+    <OutDir Condition="'$(Configuration)|$(Platform)'=='ReleaseWithoutAsm|Win32'">x86\ZlibStat$(Configuration)\</OutDir>
+    <IntDir Condition="'$(Configuration)|$(Platform)'=='ReleaseWithoutAsm|Win32'">x86\ZlibStat$(Configuration)\Tmp\</IntDir>
+    <OutDir Condition="'$(Configuration)|$(Platform)'=='Debug|x64'">x64\ZlibStat$(Configuration)\</OutDir>
+    <IntDir Condition="'$(Configuration)|$(Platform)'=='Debug|x64'">x64\ZlibStat$(Configuration)\Tmp\</IntDir>
+    <OutDir Condition="'$(Configuration)|$(Platform)'=='Debug|Itanium'">ia64\ZlibStat$(Configuration)\</OutDir>
+    <IntDir Condition="'$(Configuration)|$(Platform)'=='Debug|Itanium'">ia64\ZlibStat$(Configuration)\Tmp\</IntDir>
+    <OutDir Condition="'$(Configuration)|$(Platform)'=='Release|x64'">x64\ZlibStat$(Configuration)\</OutDir>
+    <IntDir Condition="'$(Configuration)|$(Platform)'=='Release|x64'">x64\ZlibStat$(Configuration)\Tmp\</IntDir>
+    <OutDir Condition="'$(Configuration)|$(Platform)'=='Release|Itanium'">ia64\ZlibStat$(Configuration)\</OutDir>
+    <IntDir Condition="'$(Configuration)|$(Platform)'=='Release|Itanium'">ia64\ZlibStat$(Configuration)\Tmp\</IntDir>
+    <OutDir Condition="'$(Configuration)|$(Platform)'=='ReleaseWithoutAsm|x64'">x64\ZlibStat$(Configuration)\</OutDir>
+    <IntDir Condition="'$(Configuration)|$(Platform)'=='ReleaseWithoutAsm|x64'">x64\ZlibStat$(Configuration)\Tmp\</IntDir>
+    <OutDir Condition="'$(Configuration)|$(Platform)'=='ReleaseWithoutAsm|Itanium'">ia64\ZlibStat$(Configuration)\</OutDir>
+    <IntDir Condition="'$(Configuration)|$(Platform)'=='ReleaseWithoutAsm|Itanium'">ia64\ZlibStat$(Configuration)\Tmp\</IntDir>
+    <CodeAnalysisRuleSet Condition="'$(Configuration)|$(Platform)'=='Debug|Itanium'">AllRules.ruleset</CodeAnalysisRuleSet>
+    <CodeAnalysisRules Condition="'$(Configuration)|$(Platform)'=='Debug|Itanium'" />
+    <CodeAnalysisRuleAssemblies Condition="'$(Configuration)|$(Platform)'=='Debug|Itanium'" />
+    <CodeAnalysisRuleSet Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'">AllRules.ruleset</CodeAnalysisRuleSet>
+    <CodeAnalysisRules Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'" />
+    <CodeAnalysisRuleAssemblies Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'" />
+    <CodeAnalysisRuleSet Condition="'$(Configuration)|$(Platform)'=='Debug|x64'">AllRules.ruleset</CodeAnalysisRuleSet>
+    <CodeAnalysisRules Condition="'$(Configuration)|$(Platform)'=='Debug|x64'" />
+    <CodeAnalysisRuleAssemblies Condition="'$(Configuration)|$(Platform)'=='Debug|x64'" />
+    <CodeAnalysisRuleSet Condition="'$(Configuration)|$(Platform)'=='ReleaseWithoutAsm|Itanium'">AllRules.ruleset</CodeAnalysisRuleSet>
+    <CodeAnalysisRules Condition="'$(Configuration)|$(Platform)'=='ReleaseWithoutAsm|Itanium'" />
+    <CodeAnalysisRuleAssemblies Condition="'$(Configuration)|$(Platform)'=='ReleaseWithoutAsm|Itanium'" />
+    <CodeAnalysisRuleSet Condition="'$(Configuration)|$(Platform)'=='ReleaseWithoutAsm|Win32'">AllRules.ruleset</CodeAnalysisRuleSet>
+    <CodeAnalysisRules Condition="'$(Configuration)|$(Platform)'=='ReleaseWithoutAsm|Win32'" />
+    <CodeAnalysisRuleAssemblies Condition="'$(Configuration)|$(Platform)'=='ReleaseWithoutAsm|Win32'" />
+    <CodeAnalysisRuleSet Condition="'$(Configuration)|$(Platform)'=='ReleaseWithoutAsm|x64'">AllRules.ruleset</CodeAnalysisRuleSet>
+    <CodeAnalysisRules Condition="'$(Configuration)|$(Platform)'=='ReleaseWithoutAsm|x64'" />
+    <CodeAnalysisRuleAssemblies Condition="'$(Configuration)|$(Platform)'=='ReleaseWithoutAsm|x64'" />
+    <CodeAnalysisRuleSet Condition="'$(Configuration)|$(Platform)'=='Release|Itanium'">AllRules.ruleset</CodeAnalysisRuleSet>
+    <CodeAnalysisRules Condition="'$(Configuration)|$(Platform)'=='Release|Itanium'" />
+    <CodeAnalysisRuleAssemblies Condition="'$(Configuration)|$(Platform)'=='Release|Itanium'" />
+    <CodeAnalysisRuleSet Condition="'$(Configuration)|$(Platform)'=='Release|Win32'">AllRules.ruleset</CodeAnalysisRuleSet>
+    <CodeAnalysisRules Condition="'$(Configuration)|$(Platform)'=='Release|Win32'" />
+    <CodeAnalysisRuleAssemblies Condition="'$(Configuration)|$(Platform)'=='Release|Win32'" />
+    <CodeAnalysisRuleSet Condition="'$(Configuration)|$(Platform)'=='Release|x64'">AllRules.ruleset</CodeAnalysisRuleSet>
+    <CodeAnalysisRules Condition="'$(Configuration)|$(Platform)'=='Release|x64'" />
+    <CodeAnalysisRuleAssemblies Condition="'$(Configuration)|$(Platform)'=='Release|x64'" />
+  </PropertyGroup>
+  <ItemDefinitionGroup Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'">
+    <ClCompile>
+      <Optimization>Disabled</Optimization>
+      <AdditionalIncludeDirectories>..\..\..;..\..\masmx86;%(AdditionalIncludeDirectories)</AdditionalIncludeDirectories>
+      <PreprocessorDefinitions>WIN32;ZLIB_WINAPI;_CRT_NONSTDC_NO_DEPRECATE;_CRT_SECURE_NO_DEPRECATE;_CRT_NONSTDC_NO_WARNINGS;%(PreprocessorDefinitions)</PreprocessorDefinitions>
+      <ExceptionHandling>
+      </ExceptionHandling>
+      <RuntimeLibrary>MultiThreadedDebug</RuntimeLibrary>
+      <BufferSecurityCheck>false</BufferSecurityCheck>
+      <PrecompiledHeaderOutputFile>$(IntDir)zlibstat.pch</PrecompiledHeaderOutputFile>
+      <AssemblerListingLocation>$(IntDir)</AssemblerListingLocation>
+      <ObjectFileName>$(IntDir)</ObjectFileName>
+      <ProgramDataBaseFileName>$(OutDir)</ProgramDataBaseFileName>
+      <WarningLevel>Level3</WarningLevel>
+      <SuppressStartupBanner>true</SuppressStartupBanner>
+      <DebugInformationFormat>OldStyle</DebugInformationFormat>
+    </ClCompile>
+    <ResourceCompile>
+      <Culture>0x040c</Culture>
+    </ResourceCompile>
+    <Lib>
+      <AdditionalOptions>/MACHINE:X86 /NODEFAULTLIB %(AdditionalOptions)</AdditionalOptions>
+      <OutputFile>$(OutDir)zlibstat.lib</OutputFile>
+      <SuppressStartupBanner>true</SuppressStartupBanner>
+    </Lib>
+  </ItemDefinitionGroup>
+  <ItemDefinitionGroup Condition="'$(Configuration)|$(Platform)'=='Release|Win32'">
+    <ClCompile>
+      <InlineFunctionExpansion>OnlyExplicitInline</InlineFunctionExpansion>
+      <AdditionalIncludeDirectories>..\..\..;..\..\masmx86;%(AdditionalIncludeDirectories)</AdditionalIncludeDirectories>
+      <PreprocessorDefinitions>WIN32;ZLIB_WINAPI;_CRT_NONSTDC_NO_DEPRECATE;_CRT_SECURE_NO_DEPRECATE;_CRT_NONSTDC_NO_WARNINGS;ASMV;ASMINF;%(PreprocessorDefinitions)</PreprocessorDefinitions>
+      <StringPooling>true</StringPooling>
+      <ExceptionHandling>
+      </ExceptionHandling>
+      <RuntimeLibrary>MultiThreaded</RuntimeLibrary>
+      <BufferSecurityCheck>false</BufferSecurityCheck>
+      <FunctionLevelLinking>true</FunctionLevelLinking>
+      <PrecompiledHeaderOutputFile>$(IntDir)zlibstat.pch</PrecompiledHeaderOutputFile>
+      <AssemblerListingLocation>$(IntDir)</AssemblerListingLocation>
+      <ObjectFileName>$(IntDir)</ObjectFileName>
+      <ProgramDataBaseFileName>$(OutDir)</ProgramDataBaseFileName>
+      <WarningLevel>Level3</WarningLevel>
+      <SuppressStartupBanner>true</SuppressStartupBanner>
+    </ClCompile>
+    <ResourceCompile>
+      <Culture>0x040c</Culture>
+    </ResourceCompile>
+    <Lib>
+      <AdditionalOptions>/MACHINE:X86 /NODEFAULTLIB %(AdditionalOptions)</AdditionalOptions>
+      <AdditionalDependencies>..\..\masmx86\match686.obj;..\..\masmx86\inffas32.obj;%(AdditionalDependencies)</AdditionalDependencies>
+      <OutputFile>$(OutDir)zlibstat.lib</OutputFile>
+      <SuppressStartupBanner>true</SuppressStartupBanner>
+    </Lib>
+  </ItemDefinitionGroup>
+  <ItemDefinitionGroup Condition="'$(Configuration)|$(Platform)'=='ReleaseWithoutAsm|Win32'">
+    <ClCompile>
+      <InlineFunctionExpansion>OnlyExplicitInline</InlineFunctionExpansion>
+      <AdditionalIncludeDirectories>..\..\..;..\..\masmx86;%(AdditionalIncludeDirectories)</AdditionalIncludeDirectories>
+      <PreprocessorDefinitions>WIN32;ZLIB_WINAPI;_CRT_NONSTDC_NO_DEPRECATE;_CRT_SECURE_NO_DEPRECATE;_CRT_NONSTDC_NO_WARNINGS;%(PreprocessorDefinitions)</PreprocessorDefinitions>
+      <StringPooling>true</StringPooling>
+      <ExceptionHandling>
+      </ExceptionHandling>
+      <RuntimeLibrary>MultiThreaded</RuntimeLibrary>
+      <BufferSecurityCheck>false</BufferSecurityCheck>
+      <FunctionLevelLinking>true</FunctionLevelLinking>
+      <PrecompiledHeaderOutputFile>$(IntDir)zlibstat.pch</PrecompiledHeaderOutputFile>
+      <AssemblerListingLocation>$(IntDir)</AssemblerListingLocation>
+      <ObjectFileName>$(IntDir)</ObjectFileName>
+      <ProgramDataBaseFileName>$(OutDir)</ProgramDataBaseFileName>
+      <WarningLevel>Level3</WarningLevel>
+      <SuppressStartupBanner>true</SuppressStartupBanner>
+    </ClCompile>
+    <ResourceCompile>
+      <Culture>0x040c</Culture>
+    </ResourceCompile>
+    <Lib>
+      <AdditionalOptions>/MACHINE:X86 /NODEFAULTLIB %(AdditionalOptions)</AdditionalOptions>
+      <OutputFile>$(OutDir)zlibstat.lib</OutputFile>
+      <SuppressStartupBanner>true</SuppressStartupBanner>
+    </Lib>
+  </ItemDefinitionGroup>
+  <ItemDefinitionGroup Condition="'$(Configuration)|$(Platform)'=='Debug|x64'">
+    <Midl>
+      <TargetEnvironment>X64</TargetEnvironment>
+    </Midl>
+    <ClCompile>
+      <Optimization>Disabled</Optimization>
+      <AdditionalIncludeDirectories>..\..\..;..\..\masmx86;%(AdditionalIncludeDirectories)</AdditionalIncludeDirectories>
+      <PreprocessorDefinitions>ZLIB_WINAPI;_CRT_NONSTDC_NO_DEPRECATE;_CRT_SECURE_NO_DEPRECATE;_CRT_NONSTDC_NO_WARNINGS;WIN64;%(PreprocessorDefinitions)</PreprocessorDefinitions>
+      <ExceptionHandling>
+      </ExceptionHandling>
+      <RuntimeLibrary>MultiThreadedDebugDLL</RuntimeLibrary>
+      <BufferSecurityCheck>false</BufferSecurityCheck>
+      <PrecompiledHeaderOutputFile>$(IntDir)zlibstat.pch</PrecompiledHeaderOutputFile>
+      <AssemblerListingLocation>$(IntDir)</AssemblerListingLocation>
+      <ObjectFileName>$(IntDir)</ObjectFileName>
+      <ProgramDataBaseFileName>$(OutDir)</ProgramDataBaseFileName>
+      <WarningLevel>Level3</WarningLevel>
+      <SuppressStartupBanner>true</SuppressStartupBanner>
+      <DebugInformationFormat>OldStyle</DebugInformationFormat>
+    </ClCompile>
+    <ResourceCompile>
+      <Culture>0x040c</Culture>
+    </ResourceCompile>
+    <Lib>
+      <AdditionalOptions>/MACHINE:AMD64 /NODEFAULTLIB %(AdditionalOptions)</AdditionalOptions>
+      <OutputFile>$(OutDir)zlibstat.lib</OutputFile>
+      <SuppressStartupBanner>true</SuppressStartupBanner>
+    </Lib>
+  </ItemDefinitionGroup>
+  <ItemDefinitionGroup Condition="'$(Configuration)|$(Platform)'=='Debug|Itanium'">
+    <Midl>
+      <TargetEnvironment>Itanium</TargetEnvironment>
+    </Midl>
+    <ClCompile>
+      <Optimization>Disabled</Optimization>
+      <AdditionalIncludeDirectories>..\..\..;..\..\masmx86;%(AdditionalIncludeDirectories)</AdditionalIncludeDirectories>
+      <PreprocessorDefinitions>ZLIB_WINAPI;_CRT_NONSTDC_NO_DEPRECATE;_CRT_SECURE_NO_DEPRECATE;_CRT_NONSTDC_NO_WARNINGS;WIN64;%(PreprocessorDefinitions)</PreprocessorDefinitions>
+      <ExceptionHandling>
+      </ExceptionHandling>
+      <RuntimeLibrary>MultiThreadedDebugDLL</RuntimeLibrary>
+      <BufferSecurityCheck>false</BufferSecurityCheck>
+      <PrecompiledHeaderOutputFile>$(IntDir)zlibstat.pch</PrecompiledHeaderOutputFile>
+      <AssemblerListingLocation>$(IntDir)</AssemblerListingLocation>
+      <ObjectFileName>$(IntDir)</ObjectFileName>
+      <ProgramDataBaseFileName>$(OutDir)</ProgramDataBaseFileName>
+      <WarningLevel>Level3</WarningLevel>
+      <SuppressStartupBanner>true</SuppressStartupBanner>
+      <DebugInformationFormat>OldStyle</DebugInformationFormat>
+    </ClCompile>
+    <ResourceCompile>
+      <Culture>0x040c</Culture>
+    </ResourceCompile>
+    <Lib>
+      <AdditionalOptions>/MACHINE:IA64 /NODEFAULTLIB %(AdditionalOptions)</AdditionalOptions>
+      <OutputFile>$(OutDir)zlibstat.lib</OutputFile>
+      <SuppressStartupBanner>true</SuppressStartupBanner>
+    </Lib>
+  </ItemDefinitionGroup>
+  <ItemDefinitionGroup Condition="'$(Configuration)|$(Platform)'=='Release|x64'">
+    <Midl>
+      <TargetEnvironment>X64</TargetEnvironment>
+    </Midl>
+    <ClCompile>
+      <InlineFunctionExpansion>OnlyExplicitInline</InlineFunctionExpansion>
+      <AdditionalIncludeDirectories>..\..\..;..\..\masmx86;%(AdditionalIncludeDirectories)</AdditionalIncludeDirectories>
+      <PreprocessorDefinitions>ZLIB_WINAPI;_CRT_NONSTDC_NO_DEPRECATE;_CRT_SECURE_NO_DEPRECATE;_CRT_NONSTDC_NO_WARNINGS;ASMV;ASMINF;WIN64;%(PreprocessorDefinitions)</PreprocessorDefinitions>
+      <StringPooling>true</StringPooling>
+      <ExceptionHandling>
+      </ExceptionHandling>
+      <RuntimeLibrary>MultiThreadedDLL</RuntimeLibrary>
+      <BufferSecurityCheck>false</BufferSecurityCheck>
+      <FunctionLevelLinking>true</FunctionLevelLinking>
+      <PrecompiledHeaderOutputFile>$(IntDir)zlibstat.pch</PrecompiledHeaderOutputFile>
+      <AssemblerListingLocation>$(IntDir)</AssemblerListingLocation>
+      <ObjectFileName>$(IntDir)</ObjectFileName>
+      <ProgramDataBaseFileName>$(OutDir)</ProgramDataBaseFileName>
+      <WarningLevel>Level3</WarningLevel>
+      <SuppressStartupBanner>true</SuppressStartupBanner>
+    </ClCompile>
+    <ResourceCompile>
+      <Culture>0x040c</Culture>
+    </ResourceCompile>
+    <Lib>
+      <AdditionalOptions>/MACHINE:AMD64 /NODEFAULTLIB %(AdditionalOptions)</AdditionalOptions>
+      <AdditionalDependencies>..\..\masmx64\gvmat64.obj;..\..\masmx64\inffasx64.obj;%(AdditionalDependencies)</AdditionalDependencies>
+      <OutputFile>$(OutDir)zlibstat.lib</OutputFile>
+      <SuppressStartupBanner>true</SuppressStartupBanner>
+    </Lib>
+  </ItemDefinitionGroup>
+  <ItemDefinitionGroup Condition="'$(Configuration)|$(Platform)'=='Release|Itanium'">
+    <Midl>
+      <TargetEnvironment>Itanium</TargetEnvironment>
+    </Midl>
+    <ClCompile>
+      <InlineFunctionExpansion>OnlyExplicitInline</InlineFunctionExpansion>
+      <AdditionalIncludeDirectories>..\..\..;..\..\masmx86;%(AdditionalIncludeDirectories)</AdditionalIncludeDirectories>
+      <PreprocessorDefinitions>ZLIB_WINAPI;_CRT_NONSTDC_NO_DEPRECATE;_CRT_SECURE_NO_DEPRECATE;_CRT_NONSTDC_NO_WARNINGS;WIN64;%(PreprocessorDefinitions)</PreprocessorDefinitions>
+      <StringPooling>true</StringPooling>
+      <ExceptionHandling>
+      </ExceptionHandling>
+      <RuntimeLibrary>MultiThreadedDLL</RuntimeLibrary>
+      <BufferSecurityCheck>false</BufferSecurityCheck>
+      <FunctionLevelLinking>true</FunctionLevelLinking>
+      <PrecompiledHeaderOutputFile>$(IntDir)zlibstat.pch</PrecompiledHeaderOutputFile>
+      <AssemblerListingLocation>$(IntDir)</AssemblerListingLocation>
+      <ObjectFileName>$(IntDir)</ObjectFileName>
+      <ProgramDataBaseFileName>$(OutDir)</ProgramDataBaseFileName>
+      <WarningLevel>Level3</WarningLevel>
+      <SuppressStartupBanner>true</SuppressStartupBanner>
+    </ClCompile>
+    <ResourceCompile>
+      <Culture>0x040c</Culture>
+    </ResourceCompile>
+    <Lib>
+      <AdditionalOptions>/MACHINE:IA64 /NODEFAULTLIB %(AdditionalOptions)</AdditionalOptions>
+      <OutputFile>$(OutDir)zlibstat.lib</OutputFile>
+      <SuppressStartupBanner>true</SuppressStartupBanner>
+    </Lib>
+  </ItemDefinitionGroup>
+  <ItemDefinitionGroup Condition="'$(Configuration)|$(Platform)'=='ReleaseWithoutAsm|x64'">
+    <Midl>
+      <TargetEnvironment>X64</TargetEnvironment>
+    </Midl>
+    <ClCompile>
+      <InlineFunctionExpansion>OnlyExplicitInline</InlineFunctionExpansion>
+      <AdditionalIncludeDirectories>..\..\..;..\..\masmx86;%(AdditionalIncludeDirectories)</AdditionalIncludeDirectories>
+      <PreprocessorDefinitions>ZLIB_WINAPI;_CRT_NONSTDC_NO_DEPRECATE;_CRT_SECURE_NO_DEPRECATE;_CRT_NONSTDC_NO_WARNINGS;WIN64;%(PreprocessorDefinitions)</PreprocessorDefinitions>
+      <StringPooling>true</StringPooling>
+      <ExceptionHandling>
+      </ExceptionHandling>
+      <RuntimeLibrary>MultiThreadedDLL</RuntimeLibrary>
+      <BufferSecurityCheck>false</BufferSecurityCheck>
+      <FunctionLevelLinking>true</FunctionLevelLinking>
+      <PrecompiledHeaderOutputFile>$(IntDir)zlibstat.pch</PrecompiledHeaderOutputFile>
+      <AssemblerListingLocation>$(IntDir)</AssemblerListingLocation>
+      <ObjectFileName>$(IntDir)</ObjectFileName>
+      <ProgramDataBaseFileName>$(OutDir)</ProgramDataBaseFileName>
+      <WarningLevel>Level3</WarningLevel>
+      <SuppressStartupBanner>true</SuppressStartupBanner>
+    </ClCompile>
+    <ResourceCompile>
+      <Culture>0x040c</Culture>
+    </ResourceCompile>
+    <Lib>
+      <AdditionalOptions>/MACHINE:AMD64 /NODEFAULTLIB %(AdditionalOptions)</AdditionalOptions>
+      <OutputFile>$(OutDir)zlibstat.lib</OutputFile>
+      <SuppressStartupBanner>true</SuppressStartupBanner>
+    </Lib>
+  </ItemDefinitionGroup>
+  <ItemDefinitionGroup Condition="'$(Configuration)|$(Platform)'=='ReleaseWithoutAsm|Itanium'">
+    <Midl>
+      <TargetEnvironment>Itanium</TargetEnvironment>
+    </Midl>
+    <ClCompile>
+      <InlineFunctionExpansion>OnlyExplicitInline</InlineFunctionExpansion>
+      <AdditionalIncludeDirectories>..\..\..;..\..\masmx86;%(AdditionalIncludeDirectories)</AdditionalIncludeDirectories>
+      <PreprocessorDefinitions>ZLIB_WINAPI;_CRT_NONSTDC_NO_DEPRECATE;_CRT_SECURE_NO_DEPRECATE;_CRT_NONSTDC_NO_WARNINGS;WIN64;%(PreprocessorDefinitions)</PreprocessorDefinitions>
+      <StringPooling>true</StringPooling>
+      <ExceptionHandling>
+      </ExceptionHandling>
+      <RuntimeLibrary>MultiThreadedDLL</RuntimeLibrary>
+      <BufferSecurityCheck>false</BufferSecurityCheck>
+      <FunctionLevelLinking>true</FunctionLevelLinking>
+      <PrecompiledHeaderOutputFile>$(IntDir)zlibstat.pch</PrecompiledHeaderOutputFile>
+      <AssemblerListingLocation>$(IntDir)</AssemblerListingLocation>
+      <ObjectFileName>$(IntDir)</ObjectFileName>
+      <ProgramDataBaseFileName>$(OutDir)</ProgramDataBaseFileName>
+      <WarningLevel>Level3</WarningLevel>
+      <SuppressStartupBanner>true</SuppressStartupBanner>
+    </ClCompile>
+    <ResourceCompile>
+      <Culture>0x040c</Culture>
+    </ResourceCompile>
+    <Lib>
+      <AdditionalOptions>/MACHINE:IA64 /NODEFAULTLIB %(AdditionalOptions)</AdditionalOptions>
+      <OutputFile>$(OutDir)zlibstat.lib</OutputFile>
+      <SuppressStartupBanner>true</SuppressStartupBanner>
+    </Lib>
+  </ItemDefinitionGroup>
+  <ItemGroup>
+    <ClCompile Include="..\..\..\adler32.c" />
+    <ClCompile Include="..\..\..\compress.c" />
+    <ClCompile Include="..\..\..\crc32.c" />
+    <ClCompile Include="..\..\..\deflate.c" />
+    <ClCompile Include="..\..\..\gzclose.c" />
+    <ClCompile Include="..\..\..\gzlib.c" />
+    <ClCompile Include="..\..\..\gzread.c" />
+    <ClCompile Include="..\..\..\gzwrite.c" />
+    <ClCompile Include="..\..\..\infback.c" />
+    <ClCompile Include="..\..\masmx64\inffas8664.c">
+      <ExcludedFromBuild Condition="'$(Configuration)|$(Platform)'=='Debug|Itanium'">true</ExcludedFromBuild>
+      <ExcludedFromBuild Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'">true</ExcludedFromBuild>
+      <ExcludedFromBuild Condition="'$(Configuration)|$(Platform)'=='ReleaseWithoutAsm|Itanium'">true</ExcludedFromBuild>
+      <ExcludedFromBuild Condition="'$(Configuration)|$(Platform)'=='ReleaseWithoutAsm|Win32'">true</ExcludedFromBuild>
+      <ExcludedFromBuild Condition="'$(Configuration)|$(Platform)'=='Release|Itanium'">true</ExcludedFromBuild>
+      <ExcludedFromBuild Condition="'$(Configuration)|$(Platform)'=='Release|Win32'">true</ExcludedFromBuild>
+    </ClCompile>
+    <ClCompile Include="..\..\..\inffast.c" />
+    <ClCompile Include="..\..\..\inflate.c" />
+    <ClCompile Include="..\..\..\inftrees.c" />
+    <ClCompile Include="..\..\minizip\ioapi.c" />
+    <ClCompile Include="..\..\..\trees.c" />
+    <ClCompile Include="..\..\..\uncompr.c" />
+    <ClCompile Include="..\..\minizip\unzip.c" />
+    <ClCompile Include="..\..\minizip\zip.c" />
+    <ClCompile Include="..\..\..\zutil.c" />
+  </ItemGroup>
+  <ItemGroup>
+    <ResourceCompile Include="zlib.rc" />
+  </ItemGroup>
+  <ItemGroup>
+    <None Include="zlibvc.def" />
+  </ItemGroup>
+  <Import Project="$(VCTargetsPath)\Microsoft.Cpp.targets" />
+  <ImportGroup Label="ExtensionTargets">
+  </ImportGroup>
+</Project>

contrib/vstudio/vc10/zlibstat.vcxproj.filters

@@ -0,0 +1,77 @@
+<?xml version="1.0" encoding="utf-8"?>
+<Project ToolsVersion="4.0" xmlns="http://schemas.microsoft.com/developer/msbuild/2003">
+  <ItemGroup>
+    <Filter Include="Source Files">
+      <UniqueIdentifier>{174213f6-7f66-4ae8-a3a8-a1e0a1e6ffdd}</UniqueIdentifier>
+    </Filter>
+  </ItemGroup>
+  <ItemGroup>
+    <ClCompile Include="..\..\..\adler32.c">
+      <Filter>Source Files</Filter>
+    </ClCompile>
+    <ClCompile Include="..\..\..\compress.c">
+      <Filter>Source Files</Filter>
+    </ClCompile>
+    <ClCompile Include="..\..\..\crc32.c">
+      <Filter>Source Files</Filter>
+    </ClCompile>
+    <ClCompile Include="..\..\..\deflate.c">
+      <Filter>Source Files</Filter>
+    </ClCompile>
+    <ClCompile Include="..\..\..\gzclose.c">
+      <Filter>Source Files</Filter>
+    </ClCompile>
+    <ClCompile Include="..\..\..\gzlib.c">
+      <Filter>Source Files</Filter>
+    </ClCompile>
+    <ClCompile Include="..\..\..\gzread.c">
+      <Filter>Source Files</Filter>
+    </ClCompile>
+    <ClCompile Include="..\..\..\gzwrite.c">
+      <Filter>Source Files</Filter>
+    </ClCompile>
+    <ClCompile Include="..\..\..\infback.c">
+      <Filter>Source Files</Filter>
+    </ClCompile>
+    <ClCompile Include="..\..\masmx64\inffas8664.c">
+      <Filter>Source Files</Filter>
+    </ClCompile>
+    <ClCompile Include="..\..\..\inffast.c">
+      <Filter>Source Files</Filter>
+    </ClCompile>
+    <ClCompile Include="..\..\..\inflate.c">
+      <Filter>Source Files</Filter>
+    </ClCompile>
+    <ClCompile Include="..\..\..\inftrees.c">
+      <Filter>Source Files</Filter>
+    </ClCompile>
+    <ClCompile Include="..\..\minizip\ioapi.c">
+      <Filter>Source Files</Filter>
+    </ClCompile>
+    <ClCompile Include="..\..\..\trees.c">
+      <Filter>Source Files</Filter>
+    </ClCompile>
+    <ClCompile Include="..\..\..\uncompr.c">
+      <Filter>Source Files</Filter>
+    </ClCompile>
+    <ClCompile Include="..\..\minizip\unzip.c">
+      <Filter>Source Files</Filter>
+    </ClCompile>
+    <ClCompile Include="..\..\minizip\zip.c">
+      <Filter>Source Files</Filter>
+    </ClCompile>
+    <ClCompile Include="..\..\..\zutil.c">
+      <Filter>Source Files</Filter>
+    </ClCompile>
+  </ItemGroup>
+  <ItemGroup>
+    <ResourceCompile Include="zlib.rc">
+      <Filter>Source Files</Filter>
+    </ResourceCompile>
+  </ItemGroup>
+  <ItemGroup>
+    <None Include="zlibvc.def">
+      <Filter>Source Files</Filter>
+    </None>
+  </ItemGroup>
+</Project>

contrib/vstudio/vc10/zlibstat.vcxproj.user

@@ -0,0 +1,3 @@
+<?xml version="1.0" encoding="utf-8"?>
+<Project ToolsVersion="4.0" xmlns="http://schemas.microsoft.com/developer/msbuild/2003">
+</Project>

contrib/vstudio/vc10/zlibvc.def

@@ -1,7 +1,7 @@
+LIBRARY
+; zlib data compression and ZIP file I/O library
 
-VERSION		1.23
+VERSION		1.24
-
-HEAPSIZE	1048576,8192
 
 EXPORTS
         adler32                                  @1
@@ -55,6 +55,7 @@ EXPORTS
         gzungetc                                 @49
         zlibCompileFlags                         @50
         deflatePrime                             @51
+        deflatePending                           @52
 
         unzOpen                                  @61
         unzClose                                 @62
@@ -90,3 +91,41 @@ EXPORTS
         unzGoToFilePos                           @101
 
         fill_win32_filefunc                      @110
+
+; zlibwapi v1.2.4 added:
+        fill_win32_filefunc64                   @111
+        fill_win32_filefunc64A                  @112
+        fill_win32_filefunc64W                  @113
+
+        unzOpen64                               @120
+        unzOpen2_64                             @121
+        unzGetGlobalInfo64                      @122
+        unzGetCurrentFileInfo64                 @124
+        unzGetCurrentFileZStreamPos64           @125
+        unztell64                               @126
+        unzGetFilePos64                         @127
+        unzGoToFilePos64                        @128
+
+        zipOpen64                               @130
+        zipOpen2_64                             @131
+        zipOpenNewFileInZip64                   @132
+        zipOpenNewFileInZip2_64                 @133
+        zipOpenNewFileInZip3_64                 @134
+        zipOpenNewFileInZip4_64                 @135
+        zipCloseFileInZipRaw64                  @136
+
+; zlib1 v1.2.4 added:
+        adler32_combine                         @140
+        crc32_combine                           @142
+        deflateSetHeader                        @144
+        deflateTune                             @145
+        gzbuffer                                @146
+        gzclose_r                               @147
+        gzclose_w                               @148
+        gzdirect                                @149
+        gzoffset                                @150
+        inflateGetHeader                        @156
+        inflateMark                             @157
+        inflatePrime                            @158
+        inflateReset2                           @159
+        inflateUndermine                        @160

contrib/vstudio/vc10/zlibvc.sln

@@ -0,0 +1,135 @@
+
+Microsoft Visual Studio Solution File, Format Version 11.00
+# Visual Studio 2010
+Project("{8BC9CEB8-8B4A-11D0-8D11-00A0C91BC942}") = "zlibvc", "zlibvc.vcxproj", "{8FD826F8-3739-44E6-8CC8-997122E53B8D}"
+EndProject
+Project("{8BC9CEB8-8B4A-11D0-8D11-00A0C91BC942}") = "zlibstat", "zlibstat.vcxproj", "{745DEC58-EBB3-47A9-A9B8-4C6627C01BF8}"
+EndProject
+Project("{8BC9CEB8-8B4A-11D0-8D11-00A0C91BC942}") = "testzlib", "testzlib.vcxproj", "{AA6666AA-E09F-4135-9C0C-4FE50C3C654B}"
+EndProject
+Project("{8BC9CEB8-8B4A-11D0-8D11-00A0C91BC942}") = "testzlibdll", "testzlibdll.vcxproj", "{C52F9E7B-498A-42BE-8DB4-85A15694366A}"
+EndProject
+Project("{8BC9CEB8-8B4A-11D0-8D11-00A0C91BC942}") = "minizip", "minizip.vcxproj", "{48CDD9DC-E09F-4135-9C0C-4FE50C3C654B}"
+EndProject
+Project("{8BC9CEB8-8B4A-11D0-8D11-00A0C91BC942}") = "miniunz", "miniunz.vcxproj", "{C52F9E7B-498A-42BE-8DB4-85A15694382A}"
+EndProject
+Global
+	GlobalSection(SolutionConfigurationPlatforms) = preSolution
+		Debug|Itanium = Debug|Itanium
+		Debug|Win32 = Debug|Win32
+		Debug|x64 = Debug|x64
+		Release|Itanium = Release|Itanium
+		Release|Win32 = Release|Win32
+		Release|x64 = Release|x64
+		ReleaseWithoutAsm|Itanium = ReleaseWithoutAsm|Itanium
+		ReleaseWithoutAsm|Win32 = ReleaseWithoutAsm|Win32
+		ReleaseWithoutAsm|x64 = ReleaseWithoutAsm|x64
+	EndGlobalSection
+	GlobalSection(ProjectConfigurationPlatforms) = postSolution
+		{8FD826F8-3739-44E6-8CC8-997122E53B8D}.Debug|Itanium.ActiveCfg = Debug|Itanium
+		{8FD826F8-3739-44E6-8CC8-997122E53B8D}.Debug|Itanium.Build.0 = Debug|Itanium
+		{8FD826F8-3739-44E6-8CC8-997122E53B8D}.Debug|Win32.ActiveCfg = Debug|Win32
+		{8FD826F8-3739-44E6-8CC8-997122E53B8D}.Debug|Win32.Build.0 = Debug|Win32
+		{8FD826F8-3739-44E6-8CC8-997122E53B8D}.Debug|x64.ActiveCfg = Debug|x64
+		{8FD826F8-3739-44E6-8CC8-997122E53B8D}.Debug|x64.Build.0 = Debug|x64
+		{8FD826F8-3739-44E6-8CC8-997122E53B8D}.Release|Itanium.ActiveCfg = Release|Itanium
+		{8FD826F8-3739-44E6-8CC8-997122E53B8D}.Release|Itanium.Build.0 = Release|Itanium
+		{8FD826F8-3739-44E6-8CC8-997122E53B8D}.Release|Win32.ActiveCfg = Release|Win32
+		{8FD826F8-3739-44E6-8CC8-997122E53B8D}.Release|Win32.Build.0 = Release|Win32
+		{8FD826F8-3739-44E6-8CC8-997122E53B8D}.Release|x64.ActiveCfg = Release|x64
+		{8FD826F8-3739-44E6-8CC8-997122E53B8D}.Release|x64.Build.0 = Release|x64
+		{8FD826F8-3739-44E6-8CC8-997122E53B8D}.ReleaseWithoutAsm|Itanium.ActiveCfg = ReleaseWithoutAsm|Itanium
+		{8FD826F8-3739-44E6-8CC8-997122E53B8D}.ReleaseWithoutAsm|Itanium.Build.0 = ReleaseWithoutAsm|Itanium
+		{8FD826F8-3739-44E6-8CC8-997122E53B8D}.ReleaseWithoutAsm|Win32.ActiveCfg = ReleaseWithoutAsm|Win32
+		{8FD826F8-3739-44E6-8CC8-997122E53B8D}.ReleaseWithoutAsm|Win32.Build.0 = ReleaseWithoutAsm|Win32
+		{8FD826F8-3739-44E6-8CC8-997122E53B8D}.ReleaseWithoutAsm|x64.ActiveCfg = ReleaseWithoutAsm|x64
+		{8FD826F8-3739-44E6-8CC8-997122E53B8D}.ReleaseWithoutAsm|x64.Build.0 = ReleaseWithoutAsm|x64
+		{745DEC58-EBB3-47A9-A9B8-4C6627C01BF8}.Debug|Itanium.ActiveCfg = Debug|Itanium
+		{745DEC58-EBB3-47A9-A9B8-4C6627C01BF8}.Debug|Itanium.Build.0 = Debug|Itanium
+		{745DEC58-EBB3-47A9-A9B8-4C6627C01BF8}.Debug|Win32.ActiveCfg = Debug|Win32
+		{745DEC58-EBB3-47A9-A9B8-4C6627C01BF8}.Debug|Win32.Build.0 = Debug|Win32
+		{745DEC58-EBB3-47A9-A9B8-4C6627C01BF8}.Debug|x64.ActiveCfg = Debug|x64
+		{745DEC58-EBB3-47A9-A9B8-4C6627C01BF8}.Debug|x64.Build.0 = Debug|x64
+		{745DEC58-EBB3-47A9-A9B8-4C6627C01BF8}.Release|Itanium.ActiveCfg = Release|Itanium
+		{745DEC58-EBB3-47A9-A9B8-4C6627C01BF8}.Release|Itanium.Build.0 = Release|Itanium
+		{745DEC58-EBB3-47A9-A9B8-4C6627C01BF8}.Release|Win32.ActiveCfg = Release|Win32
+		{745DEC58-EBB3-47A9-A9B8-4C6627C01BF8}.Release|Win32.Build.0 = Release|Win32
+		{745DEC58-EBB3-47A9-A9B8-4C6627C01BF8}.Release|x64.ActiveCfg = Release|x64
+		{745DEC58-EBB3-47A9-A9B8-4C6627C01BF8}.Release|x64.Build.0 = Release|x64
+		{745DEC58-EBB3-47A9-A9B8-4C6627C01BF8}.ReleaseWithoutAsm|Itanium.ActiveCfg = ReleaseWithoutAsm|Itanium
+		{745DEC58-EBB3-47A9-A9B8-4C6627C01BF8}.ReleaseWithoutAsm|Itanium.Build.0 = ReleaseWithoutAsm|Itanium
+		{745DEC58-EBB3-47A9-A9B8-4C6627C01BF8}.ReleaseWithoutAsm|Win32.ActiveCfg = ReleaseWithoutAsm|Win32
+		{745DEC58-EBB3-47A9-A9B8-4C6627C01BF8}.ReleaseWithoutAsm|Win32.Build.0 = ReleaseWithoutAsm|Win32
+		{745DEC58-EBB3-47A9-A9B8-4C6627C01BF8}.ReleaseWithoutAsm|x64.ActiveCfg = ReleaseWithoutAsm|x64
+		{745DEC58-EBB3-47A9-A9B8-4C6627C01BF8}.ReleaseWithoutAsm|x64.Build.0 = ReleaseWithoutAsm|x64
+		{AA6666AA-E09F-4135-9C0C-4FE50C3C654B}.Debug|Itanium.ActiveCfg = Debug|Itanium
+		{AA6666AA-E09F-4135-9C0C-4FE50C3C654B}.Debug|Itanium.Build.0 = Debug|Itanium
+		{AA6666AA-E09F-4135-9C0C-4FE50C3C654B}.Debug|Win32.ActiveCfg = Debug|Win32
+		{AA6666AA-E09F-4135-9C0C-4FE50C3C654B}.Debug|Win32.Build.0 = Debug|Win32
+		{AA6666AA-E09F-4135-9C0C-4FE50C3C654B}.Debug|x64.ActiveCfg = Debug|x64
+		{AA6666AA-E09F-4135-9C0C-4FE50C3C654B}.Debug|x64.Build.0 = Debug|x64
+		{AA6666AA-E09F-4135-9C0C-4FE50C3C654B}.Release|Itanium.ActiveCfg = Release|Itanium
+		{AA6666AA-E09F-4135-9C0C-4FE50C3C654B}.Release|Itanium.Build.0 = Release|Itanium
+		{AA6666AA-E09F-4135-9C0C-4FE50C3C654B}.Release|Win32.ActiveCfg = Release|Win32
+		{AA6666AA-E09F-4135-9C0C-4FE50C3C654B}.Release|Win32.Build.0 = Release|Win32
+		{AA6666AA-E09F-4135-9C0C-4FE50C3C654B}.Release|x64.ActiveCfg = Release|x64
+		{AA6666AA-E09F-4135-9C0C-4FE50C3C654B}.Release|x64.Build.0 = Release|x64
+		{AA6666AA-E09F-4135-9C0C-4FE50C3C654B}.ReleaseWithoutAsm|Itanium.ActiveCfg = ReleaseWithoutAsm|Itanium
+		{AA6666AA-E09F-4135-9C0C-4FE50C3C654B}.ReleaseWithoutAsm|Itanium.Build.0 = ReleaseWithoutAsm|Itanium
+		{AA6666AA-E09F-4135-9C0C-4FE50C3C654B}.ReleaseWithoutAsm|Win32.ActiveCfg = ReleaseWithoutAsm|Win32
+		{AA6666AA-E09F-4135-9C0C-4FE50C3C654B}.ReleaseWithoutAsm|Win32.Build.0 = ReleaseWithoutAsm|Win32
+		{AA6666AA-E09F-4135-9C0C-4FE50C3C654B}.ReleaseWithoutAsm|x64.ActiveCfg = ReleaseWithoutAsm|x64
+		{AA6666AA-E09F-4135-9C0C-4FE50C3C654B}.ReleaseWithoutAsm|x64.Build.0 = ReleaseWithoutAsm|x64
+		{C52F9E7B-498A-42BE-8DB4-85A15694366A}.Debug|Itanium.ActiveCfg = Debug|Itanium
+		{C52F9E7B-498A-42BE-8DB4-85A15694366A}.Debug|Itanium.Build.0 = Debug|Itanium
+		{C52F9E7B-498A-42BE-8DB4-85A15694366A}.Debug|Win32.ActiveCfg = Debug|Win32
+		{C52F9E7B-498A-42BE-8DB4-85A15694366A}.Debug|Win32.Build.0 = Debug|Win32
+		{C52F9E7B-498A-42BE-8DB4-85A15694366A}.Debug|x64.ActiveCfg = Debug|x64
+		{C52F9E7B-498A-42BE-8DB4-85A15694366A}.Debug|x64.Build.0 = Debug|x64
+		{C52F9E7B-498A-42BE-8DB4-85A15694366A}.Release|Itanium.ActiveCfg = Release|Itanium
+		{C52F9E7B-498A-42BE-8DB4-85A15694366A}.Release|Itanium.Build.0 = Release|Itanium
+		{C52F9E7B-498A-42BE-8DB4-85A15694366A}.Release|Win32.ActiveCfg = Release|Win32
+		{C52F9E7B-498A-42BE-8DB4-85A15694366A}.Release|Win32.Build.0 = Release|Win32
+		{C52F9E7B-498A-42BE-8DB4-85A15694366A}.Release|x64.ActiveCfg = Release|x64
+		{C52F9E7B-498A-42BE-8DB4-85A15694366A}.Release|x64.Build.0 = Release|x64
+		{C52F9E7B-498A-42BE-8DB4-85A15694366A}.ReleaseWithoutAsm|Itanium.ActiveCfg = Release|Itanium
+		{C52F9E7B-498A-42BE-8DB4-85A15694366A}.ReleaseWithoutAsm|Itanium.Build.0 = Release|Itanium
+		{C52F9E7B-498A-42BE-8DB4-85A15694366A}.ReleaseWithoutAsm|Win32.ActiveCfg = Release|Win32
+		{C52F9E7B-498A-42BE-8DB4-85A15694366A}.ReleaseWithoutAsm|x64.ActiveCfg = Release|x64
+		{48CDD9DC-E09F-4135-9C0C-4FE50C3C654B}.Debug|Itanium.ActiveCfg = Debug|Itanium
+		{48CDD9DC-E09F-4135-9C0C-4FE50C3C654B}.Debug|Itanium.Build.0 = Debug|Itanium
+		{48CDD9DC-E09F-4135-9C0C-4FE50C3C654B}.Debug|Win32.ActiveCfg = Debug|Win32
+		{48CDD9DC-E09F-4135-9C0C-4FE50C3C654B}.Debug|Win32.Build.0 = Debug|Win32
+		{48CDD9DC-E09F-4135-9C0C-4FE50C3C654B}.Debug|x64.ActiveCfg = Debug|x64
+		{48CDD9DC-E09F-4135-9C0C-4FE50C3C654B}.Debug|x64.Build.0 = Debug|x64
+		{48CDD9DC-E09F-4135-9C0C-4FE50C3C654B}.Release|Itanium.ActiveCfg = Release|Itanium
+		{48CDD9DC-E09F-4135-9C0C-4FE50C3C654B}.Release|Itanium.Build.0 = Release|Itanium
+		{48CDD9DC-E09F-4135-9C0C-4FE50C3C654B}.Release|Win32.ActiveCfg = Release|Win32
+		{48CDD9DC-E09F-4135-9C0C-4FE50C3C654B}.Release|Win32.Build.0 = Release|Win32
+		{48CDD9DC-E09F-4135-9C0C-4FE50C3C654B}.Release|x64.ActiveCfg = Release|x64
+		{48CDD9DC-E09F-4135-9C0C-4FE50C3C654B}.Release|x64.Build.0 = Release|x64
+		{48CDD9DC-E09F-4135-9C0C-4FE50C3C654B}.ReleaseWithoutAsm|Itanium.ActiveCfg = Release|Itanium
+		{48CDD9DC-E09F-4135-9C0C-4FE50C3C654B}.ReleaseWithoutAsm|Itanium.Build.0 = Release|Itanium
+		{48CDD9DC-E09F-4135-9C0C-4FE50C3C654B}.ReleaseWithoutAsm|Win32.ActiveCfg = Release|Win32
+		{48CDD9DC-E09F-4135-9C0C-4FE50C3C654B}.ReleaseWithoutAsm|x64.ActiveCfg = Release|x64
+		{C52F9E7B-498A-42BE-8DB4-85A15694382A}.Debug|Itanium.ActiveCfg = Debug|Itanium
+		{C52F9E7B-498A-42BE-8DB4-85A15694382A}.Debug|Itanium.Build.0 = Debug|Itanium
+		{C52F9E7B-498A-42BE-8DB4-85A15694382A}.Debug|Win32.ActiveCfg = Debug|Win32
+		{C52F9E7B-498A-42BE-8DB4-85A15694382A}.Debug|Win32.Build.0 = Debug|Win32
+		{C52F9E7B-498A-42BE-8DB4-85A15694382A}.Debug|x64.ActiveCfg = Debug|x64
+		{C52F9E7B-498A-42BE-8DB4-85A15694382A}.Debug|x64.Build.0 = Debug|x64
+		{C52F9E7B-498A-42BE-8DB4-85A15694382A}.Release|Itanium.ActiveCfg = Release|Itanium
+		{C52F9E7B-498A-42BE-8DB4-85A15694382A}.Release|Itanium.Build.0 = Release|Itanium
+		{C52F9E7B-498A-42BE-8DB4-85A15694382A}.Release|Win32.ActiveCfg = Release|Win32
+		{C52F9E7B-498A-42BE-8DB4-85A15694382A}.Release|Win32.Build.0 = Release|Win32
+		{C52F9E7B-498A-42BE-8DB4-85A15694382A}.Release|x64.ActiveCfg = Release|x64
+		{C52F9E7B-498A-42BE-8DB4-85A15694382A}.Release|x64.Build.0 = Release|x64
+		{C52F9E7B-498A-42BE-8DB4-85A15694382A}.ReleaseWithoutAsm|Itanium.ActiveCfg = Release|Itanium
+		{C52F9E7B-498A-42BE-8DB4-85A15694382A}.ReleaseWithoutAsm|Itanium.Build.0 = Release|Itanium
+		{C52F9E7B-498A-42BE-8DB4-85A15694382A}.ReleaseWithoutAsm|Win32.ActiveCfg = Release|Win32
+		{C52F9E7B-498A-42BE-8DB4-85A15694382A}.ReleaseWithoutAsm|x64.ActiveCfg = Release|x64
+	EndGlobalSection
+	GlobalSection(SolutionProperties) = preSolution
+		HideSolutionNode = FALSE
+	EndGlobalSection
+EndGlobal

contrib/vstudio/vc10/zlibvc.vcxproj

@@ -0,0 +1,659 @@
+<?xml version="1.0" encoding="utf-8"?>
+<Project DefaultTargets="Build" ToolsVersion="4.0" xmlns="http://schemas.microsoft.com/developer/msbuild/2003">
+  <ItemGroup Label="ProjectConfigurations">
+    <ProjectConfiguration Include="Debug|Itanium">
+      <Configuration>Debug</Configuration>
+      <Platform>Itanium</Platform>
+    </ProjectConfiguration>
+    <ProjectConfiguration Include="Debug|Win32">
+      <Configuration>Debug</Configuration>
+      <Platform>Win32</Platform>
+    </ProjectConfiguration>
+    <ProjectConfiguration Include="Debug|x64">
+      <Configuration>Debug</Configuration>
+      <Platform>x64</Platform>
+    </ProjectConfiguration>
+    <ProjectConfiguration Include="ReleaseWithoutAsm|Itanium">
+      <Configuration>ReleaseWithoutAsm</Configuration>
+      <Platform>Itanium</Platform>
+    </ProjectConfiguration>
+    <ProjectConfiguration Include="ReleaseWithoutAsm|Win32">
+      <Configuration>ReleaseWithoutAsm</Configuration>
+      <Platform>Win32</Platform>
+    </ProjectConfiguration>
+    <ProjectConfiguration Include="ReleaseWithoutAsm|x64">
+      <Configuration>ReleaseWithoutAsm</Configuration>
+      <Platform>x64</Platform>
+    </ProjectConfiguration>
+    <ProjectConfiguration Include="Release|Itanium">
+      <Configuration>Release</Configuration>
+      <Platform>Itanium</Platform>
+    </ProjectConfiguration>
+    <ProjectConfiguration Include="Release|Win32">
+      <Configuration>Release</Configuration>
+      <Platform>Win32</Platform>
+    </ProjectConfiguration>
+    <ProjectConfiguration Include="Release|x64">
+      <Configuration>Release</Configuration>
+      <Platform>x64</Platform>
+    </ProjectConfiguration>
+  </ItemGroup>
+  <PropertyGroup Label="Globals">
+    <ProjectGuid>{8FD826F8-3739-44E6-8CC8-997122E53B8D}</ProjectGuid>
+  </PropertyGroup>
+  <Import Project="$(VCTargetsPath)\Microsoft.Cpp.Default.props" />
+  <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Release|Win32'" Label="Configuration">
+    <ConfigurationType>DynamicLibrary</ConfigurationType>
+    <UseOfMfc>false</UseOfMfc>
+    <WholeProgramOptimization>true</WholeProgramOptimization>
+  </PropertyGroup>
+  <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='ReleaseWithoutAsm|Win32'" Label="Configuration">
+    <ConfigurationType>DynamicLibrary</ConfigurationType>
+    <UseOfMfc>false</UseOfMfc>
+    <WholeProgramOptimization>true</WholeProgramOptimization>
+  </PropertyGroup>
+  <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'" Label="Configuration">
+    <ConfigurationType>DynamicLibrary</ConfigurationType>
+    <UseOfMfc>false</UseOfMfc>
+  </PropertyGroup>
+  <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Release|Itanium'" Label="Configuration">
+    <ConfigurationType>DynamicLibrary</ConfigurationType>
+    <UseOfMfc>false</UseOfMfc>
+    <WholeProgramOptimization>true</WholeProgramOptimization>
+  </PropertyGroup>
+  <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='ReleaseWithoutAsm|Itanium'" Label="Configuration">
+    <ConfigurationType>DynamicLibrary</ConfigurationType>
+    <UseOfMfc>false</UseOfMfc>
+    <WholeProgramOptimization>true</WholeProgramOptimization>
+  </PropertyGroup>
+  <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Debug|Itanium'" Label="Configuration">
+    <ConfigurationType>DynamicLibrary</ConfigurationType>
+    <UseOfMfc>false</UseOfMfc>
+  </PropertyGroup>
+  <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Release|x64'" Label="Configuration">
+    <ConfigurationType>DynamicLibrary</ConfigurationType>
+    <UseOfMfc>false</UseOfMfc>
+    <WholeProgramOptimization>true</WholeProgramOptimization>
+  </PropertyGroup>
+  <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='ReleaseWithoutAsm|x64'" Label="Configuration">
+    <ConfigurationType>DynamicLibrary</ConfigurationType>
+    <UseOfMfc>false</UseOfMfc>
+    <WholeProgramOptimization>true</WholeProgramOptimization>
+  </PropertyGroup>
+  <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Debug|x64'" Label="Configuration">
+    <ConfigurationType>DynamicLibrary</ConfigurationType>
+    <UseOfMfc>false</UseOfMfc>
+  </PropertyGroup>
+  <Import Project="$(VCTargetsPath)\Microsoft.Cpp.props" />
+  <ImportGroup Label="ExtensionSettings">
+  </ImportGroup>
+  <ImportGroup Condition="'$(Configuration)|$(Platform)'=='Release|Win32'" Label="PropertySheets">
+    <Import Project="$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props" Condition="exists('$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props')" Label="LocalAppDataPlatform" />
+  </ImportGroup>
+  <ImportGroup Condition="'$(Configuration)|$(Platform)'=='ReleaseWithoutAsm|Win32'" Label="PropertySheets">
+    <Import Project="$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props" Condition="exists('$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props')" Label="LocalAppDataPlatform" />
+  </ImportGroup>
+  <ImportGroup Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'" Label="PropertySheets">
+    <Import Project="$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props" Condition="exists('$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props')" Label="LocalAppDataPlatform" />
+  </ImportGroup>
+  <ImportGroup Condition="'$(Configuration)|$(Platform)'=='Release|Itanium'" Label="PropertySheets">
+    <Import Project="$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props" Condition="exists('$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props')" Label="LocalAppDataPlatform" />
+  </ImportGroup>
+  <ImportGroup Condition="'$(Configuration)|$(Platform)'=='ReleaseWithoutAsm|Itanium'" Label="PropertySheets">
+    <Import Project="$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props" Condition="exists('$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props')" Label="LocalAppDataPlatform" />
+  </ImportGroup>
+  <ImportGroup Condition="'$(Configuration)|$(Platform)'=='Debug|Itanium'" Label="PropertySheets">
+    <Import Project="$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props" Condition="exists('$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props')" Label="LocalAppDataPlatform" />
+  </ImportGroup>
+  <ImportGroup Condition="'$(Configuration)|$(Platform)'=='Release|x64'" Label="PropertySheets">
+    <Import Project="$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props" Condition="exists('$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props')" Label="LocalAppDataPlatform" />
+  </ImportGroup>
+  <ImportGroup Condition="'$(Configuration)|$(Platform)'=='ReleaseWithoutAsm|x64'" Label="PropertySheets">
+    <Import Project="$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props" Condition="exists('$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props')" Label="LocalAppDataPlatform" />
+  </ImportGroup>
+  <ImportGroup Condition="'$(Configuration)|$(Platform)'=='Debug|x64'" Label="PropertySheets">
+    <Import Project="$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props" Condition="exists('$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props')" Label="LocalAppDataPlatform" />
+  </ImportGroup>
+  <PropertyGroup Label="UserMacros" />
+  <PropertyGroup>
+    <_ProjectFileVersion>10.0.30128.1</_ProjectFileVersion>
+    <OutDir Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'">x86\ZlibDll$(Configuration)\</OutDir>
+    <IntDir Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'">x86\ZlibDll$(Configuration)\Tmp\</IntDir>
+    <LinkIncremental Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'">true</LinkIncremental>
+    <GenerateManifest Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'">false</GenerateManifest>
+    <OutDir Condition="'$(Configuration)|$(Platform)'=='ReleaseWithoutAsm|Win32'">x86\ZlibDll$(Configuration)\</OutDir>
+    <IntDir Condition="'$(Configuration)|$(Platform)'=='ReleaseWithoutAsm|Win32'">x86\ZlibDll$(Configuration)\Tmp\</IntDir>
+    <LinkIncremental Condition="'$(Configuration)|$(Platform)'=='ReleaseWithoutAsm|Win32'">false</LinkIncremental>
+    <GenerateManifest Condition="'$(Configuration)|$(Platform)'=='ReleaseWithoutAsm|Win32'">false</GenerateManifest>
+    <OutDir Condition="'$(Configuration)|$(Platform)'=='Release|Win32'">x86\ZlibDll$(Configuration)\</OutDir>
+    <IntDir Condition="'$(Configuration)|$(Platform)'=='Release|Win32'">x86\ZlibDll$(Configuration)\Tmp\</IntDir>
+    <LinkIncremental Condition="'$(Configuration)|$(Platform)'=='Release|Win32'">false</LinkIncremental>
+    <GenerateManifest Condition="'$(Configuration)|$(Platform)'=='Release|Win32'">false</GenerateManifest>
+    <OutDir Condition="'$(Configuration)|$(Platform)'=='Debug|x64'">x64\ZlibDll$(Configuration)\</OutDir>
+    <IntDir Condition="'$(Configuration)|$(Platform)'=='Debug|x64'">x64\ZlibDll$(Configuration)\Tmp\</IntDir>
+    <LinkIncremental Condition="'$(Configuration)|$(Platform)'=='Debug|x64'">true</LinkIncremental>
+    <GenerateManifest Condition="'$(Configuration)|$(Platform)'=='Debug|x64'">false</GenerateManifest>
+    <OutDir Condition="'$(Configuration)|$(Platform)'=='Debug|Itanium'">ia64\ZlibDll$(Configuration)\</OutDir>
+    <IntDir Condition="'$(Configuration)|$(Platform)'=='Debug|Itanium'">ia64\ZlibDll$(Configuration)\Tmp\</IntDir>
+    <LinkIncremental Condition="'$(Configuration)|$(Platform)'=='Debug|Itanium'">true</LinkIncremental>
+    <GenerateManifest Condition="'$(Configuration)|$(Platform)'=='Debug|Itanium'">false</GenerateManifest>
+    <OutDir Condition="'$(Configuration)|$(Platform)'=='ReleaseWithoutAsm|x64'">x64\ZlibDll$(Configuration)\</OutDir>
+    <IntDir Condition="'$(Configuration)|$(Platform)'=='ReleaseWithoutAsm|x64'">x64\ZlibDll$(Configuration)\Tmp\</IntDir>
+    <LinkIncremental Condition="'$(Configuration)|$(Platform)'=='ReleaseWithoutAsm|x64'">false</LinkIncremental>
+    <GenerateManifest Condition="'$(Configuration)|$(Platform)'=='ReleaseWithoutAsm|x64'">false</GenerateManifest>
+    <OutDir Condition="'$(Configuration)|$(Platform)'=='ReleaseWithoutAsm|Itanium'">ia64\ZlibDll$(Configuration)\</OutDir>
+    <IntDir Condition="'$(Configuration)|$(Platform)'=='ReleaseWithoutAsm|Itanium'">ia64\ZlibDll$(Configuration)\Tmp\</IntDir>
+    <LinkIncremental Condition="'$(Configuration)|$(Platform)'=='ReleaseWithoutAsm|Itanium'">false</LinkIncremental>
+    <GenerateManifest Condition="'$(Configuration)|$(Platform)'=='ReleaseWithoutAsm|Itanium'">false</GenerateManifest>
+    <OutDir Condition="'$(Configuration)|$(Platform)'=='Release|x64'">x64\ZlibDll$(Configuration)\</OutDir>
+    <IntDir Condition="'$(Configuration)|$(Platform)'=='Release|x64'">x64\ZlibDll$(Configuration)\Tmp\</IntDir>
+    <LinkIncremental Condition="'$(Configuration)|$(Platform)'=='Release|x64'">false</LinkIncremental>
+    <GenerateManifest Condition="'$(Configuration)|$(Platform)'=='Release|x64'">false</GenerateManifest>
+    <OutDir Condition="'$(Configuration)|$(Platform)'=='Release|Itanium'">ia64\ZlibDll$(Configuration)\</OutDir>
+    <IntDir Condition="'$(Configuration)|$(Platform)'=='Release|Itanium'">ia64\ZlibDll$(Configuration)\Tmp\</IntDir>
+    <LinkIncremental Condition="'$(Configuration)|$(Platform)'=='Release|Itanium'">false</LinkIncremental>
+    <GenerateManifest Condition="'$(Configuration)|$(Platform)'=='Release|Itanium'">false</GenerateManifest>
+    <CodeAnalysisRuleSet Condition="'$(Configuration)|$(Platform)'=='Debug|Itanium'">AllRules.ruleset</CodeAnalysisRuleSet>
+    <CodeAnalysisRules Condition="'$(Configuration)|$(Platform)'=='Debug|Itanium'" />
+    <CodeAnalysisRuleAssemblies Condition="'$(Configuration)|$(Platform)'=='Debug|Itanium'" />
+    <CodeAnalysisRuleSet Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'">AllRules.ruleset</CodeAnalysisRuleSet>
+    <CodeAnalysisRules Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'" />
+    <CodeAnalysisRuleAssemblies Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'" />
+    <CodeAnalysisRuleSet Condition="'$(Configuration)|$(Platform)'=='Debug|x64'">AllRules.ruleset</CodeAnalysisRuleSet>
+    <CodeAnalysisRules Condition="'$(Configuration)|$(Platform)'=='Debug|x64'" />
+    <CodeAnalysisRuleAssemblies Condition="'$(Configuration)|$(Platform)'=='Debug|x64'" />
+    <CodeAnalysisRuleSet Condition="'$(Configuration)|$(Platform)'=='ReleaseWithoutAsm|Itanium'">AllRules.ruleset</CodeAnalysisRuleSet>
+    <CodeAnalysisRules Condition="'$(Configuration)|$(Platform)'=='ReleaseWithoutAsm|Itanium'" />
+    <CodeAnalysisRuleAssemblies Condition="'$(Configuration)|$(Platform)'=='ReleaseWithoutAsm|Itanium'" />
+    <CodeAnalysisRuleSet Condition="'$(Configuration)|$(Platform)'=='ReleaseWithoutAsm|Win32'">AllRules.ruleset</CodeAnalysisRuleSet>
+    <CodeAnalysisRules Condition="'$(Configuration)|$(Platform)'=='ReleaseWithoutAsm|Win32'" />
+    <CodeAnalysisRuleAssemblies Condition="'$(Configuration)|$(Platform)'=='ReleaseWithoutAsm|Win32'" />
+    <CodeAnalysisRuleSet Condition="'$(Configuration)|$(Platform)'=='ReleaseWithoutAsm|x64'">AllRules.ruleset</CodeAnalysisRuleSet>
+    <CodeAnalysisRules Condition="'$(Configuration)|$(Platform)'=='ReleaseWithoutAsm|x64'" />
+    <CodeAnalysisRuleAssemblies Condition="'$(Configuration)|$(Platform)'=='ReleaseWithoutAsm|x64'" />
+    <CodeAnalysisRuleSet Condition="'$(Configuration)|$(Platform)'=='Release|Itanium'">AllRules.ruleset</CodeAnalysisRuleSet>
+    <CodeAnalysisRules Condition="'$(Configuration)|$(Platform)'=='Release|Itanium'" />
+    <CodeAnalysisRuleAssemblies Condition="'$(Configuration)|$(Platform)'=='Release|Itanium'" />
+    <CodeAnalysisRuleSet Condition="'$(Configuration)|$(Platform)'=='Release|Win32'">AllRules.ruleset</CodeAnalysisRuleSet>
+    <CodeAnalysisRules Condition="'$(Configuration)|$(Platform)'=='Release|Win32'" />
+    <CodeAnalysisRuleAssemblies Condition="'$(Configuration)|$(Platform)'=='Release|Win32'" />
+    <CodeAnalysisRuleSet Condition="'$(Configuration)|$(Platform)'=='Release|x64'">AllRules.ruleset</CodeAnalysisRuleSet>
+    <CodeAnalysisRules Condition="'$(Configuration)|$(Platform)'=='Release|x64'" />
+    <CodeAnalysisRuleAssemblies Condition="'$(Configuration)|$(Platform)'=='Release|x64'" />
+  </PropertyGroup>
+  <ItemDefinitionGroup Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'">
+    <Midl>
+      <PreprocessorDefinitions>_DEBUG;%(PreprocessorDefinitions)</PreprocessorDefinitions>
+      <MkTypLibCompatible>true</MkTypLibCompatible>
+      <SuppressStartupBanner>true</SuppressStartupBanner>
+      <TargetEnvironment>Win32</TargetEnvironment>
+      <TypeLibraryName>$(OutDir)zlibvc.tlb</TypeLibraryName>
+    </Midl>
+    <ClCompile>
+      <Optimization>Disabled</Optimization>
+      <AdditionalIncludeDirectories>..\..\..;..\..\masmx86;%(AdditionalIncludeDirectories)</AdditionalIncludeDirectories>
+      <PreprocessorDefinitions>WIN32;_CRT_NONSTDC_NO_DEPRECATE;_CRT_SECURE_NO_DEPRECATE;_CRT_NONSTDC_NO_WARNINGS;ZLIB_WINAPI;ASMV;ASMINF;%(PreprocessorDefinitions)</PreprocessorDefinitions>
+      <ExceptionHandling>
+      </ExceptionHandling>
+      <RuntimeLibrary>MultiThreadedDebug</RuntimeLibrary>
+      <BufferSecurityCheck>false</BufferSecurityCheck>
+      <PrecompiledHeaderOutputFile>$(IntDir)zlibvc.pch</PrecompiledHeaderOutputFile>
+      <AssemblerListingLocation>$(IntDir)</AssemblerListingLocation>
+      <ObjectFileName>$(IntDir)</ObjectFileName>
+      <ProgramDataBaseFileName>$(OutDir)</ProgramDataBaseFileName>
+      <BrowseInformation>
+      </BrowseInformation>
+      <WarningLevel>Level3</WarningLevel>
+      <SuppressStartupBanner>true</SuppressStartupBanner>
+      <DebugInformationFormat>EditAndContinue</DebugInformationFormat>
+    </ClCompile>
+    <ResourceCompile>
+      <PreprocessorDefinitions>_DEBUG;%(PreprocessorDefinitions)</PreprocessorDefinitions>
+      <Culture>0x040c</Culture>
+    </ResourceCompile>
+    <Link>
+      <AdditionalOptions>/MACHINE:I386 %(AdditionalOptions)</AdditionalOptions>
+      <AdditionalDependencies>..\..\masmx86\match686.obj;..\..\masmx86\inffas32.obj;%(AdditionalDependencies)</AdditionalDependencies>
+      <OutputFile>$(OutDir)zlibwapi.dll</OutputFile>
+      <SuppressStartupBanner>true</SuppressStartupBanner>
+      <ModuleDefinitionFile>.\zlibvc.def</ModuleDefinitionFile>
+      <GenerateDebugInformation>true</GenerateDebugInformation>
+      <ProgramDatabaseFile>$(OutDir)zlibwapi.pdb</ProgramDatabaseFile>
+      <GenerateMapFile>true</GenerateMapFile>
+      <MapFileName>$(OutDir)zlibwapi.map</MapFileName>
+      <SubSystem>Windows</SubSystem>
+      <RandomizedBaseAddress>false</RandomizedBaseAddress>
+      <DataExecutionPrevention>
+      </DataExecutionPrevention>
+      <ImportLibrary>$(OutDir)zlibwapi.lib</ImportLibrary>
+    </Link>
+  </ItemDefinitionGroup>
+  <ItemDefinitionGroup Condition="'$(Configuration)|$(Platform)'=='ReleaseWithoutAsm|Win32'">
+    <Midl>
+      <PreprocessorDefinitions>NDEBUG;%(PreprocessorDefinitions)</PreprocessorDefinitions>
+      <MkTypLibCompatible>true</MkTypLibCompatible>
+      <SuppressStartupBanner>true</SuppressStartupBanner>
+      <TargetEnvironment>Win32</TargetEnvironment>
+      <TypeLibraryName>$(OutDir)zlibvc.tlb</TypeLibraryName>
+    </Midl>
+    <ClCompile>
+      <InlineFunctionExpansion>OnlyExplicitInline</InlineFunctionExpansion>
+      <AdditionalIncludeDirectories>..\..\..;..\..\masmx86;%(AdditionalIncludeDirectories)</AdditionalIncludeDirectories>
+      <PreprocessorDefinitions>WIN32;_CRT_NONSTDC_NO_DEPRECATE;_CRT_SECURE_NO_DEPRECATE;_CRT_NONSTDC_NO_WARNINGS;ZLIB_WINAPI;%(PreprocessorDefinitions)</PreprocessorDefinitions>
+      <StringPooling>true</StringPooling>
+      <ExceptionHandling>
+      </ExceptionHandling>
+      <RuntimeLibrary>MultiThreadedDLL</RuntimeLibrary>
+      <BufferSecurityCheck>false</BufferSecurityCheck>
+      <FunctionLevelLinking>true</FunctionLevelLinking>
+      <PrecompiledHeaderOutputFile>$(IntDir)zlibvc.pch</PrecompiledHeaderOutputFile>
+      <AssemblerOutput>All</AssemblerOutput>
+      <AssemblerListingLocation>$(IntDir)</AssemblerListingLocation>
+      <ObjectFileName>$(IntDir)</ObjectFileName>
+      <ProgramDataBaseFileName>$(OutDir)</ProgramDataBaseFileName>
+      <BrowseInformation>
+      </BrowseInformation>
+      <WarningLevel>Level3</WarningLevel>
+      <SuppressStartupBanner>true</SuppressStartupBanner>
+    </ClCompile>
+    <ResourceCompile>
+      <PreprocessorDefinitions>NDEBUG;%(PreprocessorDefinitions)</PreprocessorDefinitions>
+      <Culture>0x040c</Culture>
+    </ResourceCompile>
+    <Link>
+      <AdditionalOptions>/MACHINE:I386 %(AdditionalOptions)</AdditionalOptions>
+      <OutputFile>$(OutDir)zlibwapi.dll</OutputFile>
+      <SuppressStartupBanner>true</SuppressStartupBanner>
+      <IgnoreAllDefaultLibraries>false</IgnoreAllDefaultLibraries>
+      <ModuleDefinitionFile>.\zlibvc.def</ModuleDefinitionFile>
+      <ProgramDatabaseFile>$(OutDir)zlibwapi.pdb</ProgramDatabaseFile>
+      <GenerateMapFile>true</GenerateMapFile>
+      <MapFileName>$(OutDir)zlibwapi.map</MapFileName>
+      <SubSystem>Windows</SubSystem>
+      <RandomizedBaseAddress>false</RandomizedBaseAddress>
+      <DataExecutionPrevention>
+      </DataExecutionPrevention>
+      <ImportLibrary>$(OutDir)zlibwapi.lib</ImportLibrary>
+    </Link>
+  </ItemDefinitionGroup>
+  <ItemDefinitionGroup Condition="'$(Configuration)|$(Platform)'=='Release|Win32'">
+    <Midl>
+      <PreprocessorDefinitions>NDEBUG;%(PreprocessorDefinitions)</PreprocessorDefinitions>
+      <MkTypLibCompatible>true</MkTypLibCompatible>
+      <SuppressStartupBanner>true</SuppressStartupBanner>
+      <TargetEnvironment>Win32</TargetEnvironment>
+      <TypeLibraryName>$(OutDir)zlibvc.tlb</TypeLibraryName>
+    </Midl>
+    <ClCompile>
+      <InlineFunctionExpansion>OnlyExplicitInline</InlineFunctionExpansion>
+      <AdditionalIncludeDirectories>..\..\..;..\..\masmx86;%(AdditionalIncludeDirectories)</AdditionalIncludeDirectories>
+      <PreprocessorDefinitions>WIN32;_CRT_NONSTDC_NO_DEPRECATE;_CRT_SECURE_NO_DEPRECATE;_CRT_NONSTDC_NO_WARNINGS;ZLIB_WINAPI;ASMV;ASMINF;%(PreprocessorDefinitions)</PreprocessorDefinitions>
+      <StringPooling>true</StringPooling>
+      <ExceptionHandling>
+      </ExceptionHandling>
+      <RuntimeLibrary>MultiThreaded</RuntimeLibrary>
+      <BufferSecurityCheck>false</BufferSecurityCheck>
+      <FunctionLevelLinking>true</FunctionLevelLinking>
+      <PrecompiledHeaderOutputFile>$(IntDir)zlibvc.pch</PrecompiledHeaderOutputFile>
+      <AssemblerOutput>All</AssemblerOutput>
+      <AssemblerListingLocation>$(IntDir)</AssemblerListingLocation>
+      <ObjectFileName>$(IntDir)</ObjectFileName>
+      <ProgramDataBaseFileName>$(OutDir)</ProgramDataBaseFileName>
+      <BrowseInformation>
+      </BrowseInformation>
+      <WarningLevel>Level3</WarningLevel>
+      <SuppressStartupBanner>true</SuppressStartupBanner>
+    </ClCompile>
+    <ResourceCompile>
+      <PreprocessorDefinitions>NDEBUG;%(PreprocessorDefinitions)</PreprocessorDefinitions>
+      <Culture>0x040c</Culture>
+    </ResourceCompile>
+    <Link>
+      <AdditionalOptions>/MACHINE:I386 %(AdditionalOptions)</AdditionalOptions>
+      <AdditionalDependencies>..\..\masmx86\match686.obj;..\..\masmx86\inffas32.obj;%(AdditionalDependencies)</AdditionalDependencies>
+      <OutputFile>$(OutDir)zlibwapi.dll</OutputFile>
+      <SuppressStartupBanner>true</SuppressStartupBanner>
+      <IgnoreAllDefaultLibraries>false</IgnoreAllDefaultLibraries>
+      <ModuleDefinitionFile>.\zlibvc.def</ModuleDefinitionFile>
+      <ProgramDatabaseFile>$(OutDir)zlibwapi.pdb</ProgramDatabaseFile>
+      <GenerateMapFile>true</GenerateMapFile>
+      <MapFileName>$(OutDir)zlibwapi.map</MapFileName>
+      <SubSystem>Windows</SubSystem>
+      <RandomizedBaseAddress>false</RandomizedBaseAddress>
+      <DataExecutionPrevention>
+      </DataExecutionPrevention>
+      <ImportLibrary>$(OutDir)zlibwapi.lib</ImportLibrary>
+    </Link>
+  </ItemDefinitionGroup>
+  <ItemDefinitionGroup Condition="'$(Configuration)|$(Platform)'=='Debug|x64'">
+    <Midl>
+      <PreprocessorDefinitions>_DEBUG;%(PreprocessorDefinitions)</PreprocessorDefinitions>
+      <MkTypLibCompatible>true</MkTypLibCompatible>
+      <SuppressStartupBanner>true</SuppressStartupBanner>
+      <TargetEnvironment>X64</TargetEnvironment>
+      <TypeLibraryName>$(OutDir)zlibvc.tlb</TypeLibraryName>
+    </Midl>
+    <ClCompile>
+      <Optimization>Disabled</Optimization>
+      <AdditionalIncludeDirectories>..\..\..;..\..\masmx86;%(AdditionalIncludeDirectories)</AdditionalIncludeDirectories>
+      <PreprocessorDefinitions>WIN32;_CRT_NONSTDC_NO_DEPRECATE;_CRT_SECURE_NO_DEPRECATE;_CRT_NONSTDC_NO_WARNINGS;ZLIB_WINAPI;ASMV;ASMINF;WIN64;%(PreprocessorDefinitions)</PreprocessorDefinitions>
+      <ExceptionHandling>
+      </ExceptionHandling>
+      <RuntimeLibrary>MultiThreadedDebugDLL</RuntimeLibrary>
+      <BufferSecurityCheck>false</BufferSecurityCheck>
+      <PrecompiledHeaderOutputFile>$(IntDir)zlibvc.pch</PrecompiledHeaderOutputFile>
+      <AssemblerListingLocation>$(IntDir)</AssemblerListingLocation>
+      <ObjectFileName>$(IntDir)</ObjectFileName>
+      <ProgramDataBaseFileName>$(OutDir)</ProgramDataBaseFileName>
+      <BrowseInformation>
+      </BrowseInformation>
+      <WarningLevel>Level3</WarningLevel>
+      <SuppressStartupBanner>true</SuppressStartupBanner>
+      <DebugInformationFormat>ProgramDatabase</DebugInformationFormat>
+    </ClCompile>
+    <ResourceCompile>
+      <PreprocessorDefinitions>_DEBUG;%(PreprocessorDefinitions)</PreprocessorDefinitions>
+      <Culture>0x040c</Culture>
+    </ResourceCompile>
+    <Link>
+      <AdditionalDependencies>..\..\masmx64\gvmat64.obj;..\..\masmx64\inffasx64.obj;%(AdditionalDependencies)</AdditionalDependencies>
+      <OutputFile>$(OutDir)zlibwapi.dll</OutputFile>
+      <SuppressStartupBanner>true</SuppressStartupBanner>
+      <ModuleDefinitionFile>.\zlibvc.def</ModuleDefinitionFile>
+      <GenerateDebugInformation>true</GenerateDebugInformation>
+      <ProgramDatabaseFile>$(OutDir)zlibwapi.pdb</ProgramDatabaseFile>
+      <GenerateMapFile>true</GenerateMapFile>
+      <MapFileName>$(OutDir)zlibwapi.map</MapFileName>
+      <SubSystem>Windows</SubSystem>
+      <ImportLibrary>$(OutDir)zlibwapi.lib</ImportLibrary>
+      <TargetMachine>MachineX64</TargetMachine>
+    </Link>
+  </ItemDefinitionGroup>
+  <ItemDefinitionGroup Condition="'$(Configuration)|$(Platform)'=='Debug|Itanium'">
+    <Midl>
+      <PreprocessorDefinitions>_DEBUG;%(PreprocessorDefinitions)</PreprocessorDefinitions>
+      <MkTypLibCompatible>true</MkTypLibCompatible>
+      <SuppressStartupBanner>true</SuppressStartupBanner>
+      <TargetEnvironment>Itanium</TargetEnvironment>
+      <TypeLibraryName>$(OutDir)zlibvc.tlb</TypeLibraryName>
+    </Midl>
+    <ClCompile>
+      <Optimization>Disabled</Optimization>
+      <AdditionalIncludeDirectories>..\..\..;..\..\masmx86;%(AdditionalIncludeDirectories)</AdditionalIncludeDirectories>
+      <PreprocessorDefinitions>WIN32;_CRT_NONSTDC_NO_DEPRECATE;_CRT_SECURE_NO_DEPRECATE;_CRT_NONSTDC_NO_WARNINGS;ZLIB_WINAPI;WIN64;%(PreprocessorDefinitions)</PreprocessorDefinitions>
+      <ExceptionHandling>
+      </ExceptionHandling>
+      <RuntimeLibrary>MultiThreadedDebugDLL</RuntimeLibrary>
+      <BufferSecurityCheck>false</BufferSecurityCheck>
+      <PrecompiledHeaderOutputFile>$(IntDir)zlibvc.pch</PrecompiledHeaderOutputFile>
+      <AssemblerListingLocation>$(IntDir)</AssemblerListingLocation>
+      <ObjectFileName>$(IntDir)</ObjectFileName>
+      <ProgramDataBaseFileName>$(OutDir)</ProgramDataBaseFileName>
+      <BrowseInformation>
+      </BrowseInformation>
+      <WarningLevel>Level3</WarningLevel>
+      <SuppressStartupBanner>true</SuppressStartupBanner>
+      <DebugInformationFormat>ProgramDatabase</DebugInformationFormat>
+    </ClCompile>
+    <ResourceCompile>
+      <PreprocessorDefinitions>_DEBUG;%(PreprocessorDefinitions)</PreprocessorDefinitions>
+      <Culture>0x040c</Culture>
+    </ResourceCompile>
+    <Link>
+      <OutputFile>$(OutDir)zlibwapi.dll</OutputFile>
+      <SuppressStartupBanner>true</SuppressStartupBanner>
+      <ModuleDefinitionFile>.\zlibvc.def</ModuleDefinitionFile>
+      <GenerateDebugInformation>true</GenerateDebugInformation>
+      <ProgramDatabaseFile>$(OutDir)zlibwapi.pdb</ProgramDatabaseFile>
+      <GenerateMapFile>true</GenerateMapFile>
+      <MapFileName>$(OutDir)zlibwapi.map</MapFileName>
+      <SubSystem>Windows</SubSystem>
+      <ImportLibrary>$(OutDir)zlibwapi.lib</ImportLibrary>
+      <TargetMachine>MachineIA64</TargetMachine>
+    </Link>
+  </ItemDefinitionGroup>
+  <ItemDefinitionGroup Condition="'$(Configuration)|$(Platform)'=='ReleaseWithoutAsm|x64'">
+    <Midl>
+      <PreprocessorDefinitions>NDEBUG;%(PreprocessorDefinitions)</PreprocessorDefinitions>
+      <MkTypLibCompatible>true</MkTypLibCompatible>
+      <SuppressStartupBanner>true</SuppressStartupBanner>
+      <TargetEnvironment>X64</TargetEnvironment>
+      <TypeLibraryName>$(OutDir)zlibvc.tlb</TypeLibraryName>
+    </Midl>
+    <ClCompile>
+      <InlineFunctionExpansion>OnlyExplicitInline</InlineFunctionExpansion>
+      <AdditionalIncludeDirectories>..\..\..;..\..\masmx86;%(AdditionalIncludeDirectories)</AdditionalIncludeDirectories>
+      <PreprocessorDefinitions>WIN32;_CRT_NONSTDC_NO_DEPRECATE;_CRT_SECURE_NO_DEPRECATE;_CRT_NONSTDC_NO_WARNINGS;ZLIB_WINAPI;WIN64;%(PreprocessorDefinitions)</PreprocessorDefinitions>
+      <StringPooling>true</StringPooling>
+      <ExceptionHandling>
+      </ExceptionHandling>
+      <RuntimeLibrary>MultiThreadedDLL</RuntimeLibrary>
+      <BufferSecurityCheck>false</BufferSecurityCheck>
+      <FunctionLevelLinking>true</FunctionLevelLinking>
+      <PrecompiledHeaderOutputFile>$(IntDir)zlibvc.pch</PrecompiledHeaderOutputFile>
+      <AssemblerOutput>All</AssemblerOutput>
+      <AssemblerListingLocation>$(IntDir)</AssemblerListingLocation>
+      <ObjectFileName>$(IntDir)</ObjectFileName>
+      <ProgramDataBaseFileName>$(OutDir)</ProgramDataBaseFileName>
+      <BrowseInformation>
+      </BrowseInformation>
+      <WarningLevel>Level3</WarningLevel>
+      <SuppressStartupBanner>true</SuppressStartupBanner>
+    </ClCompile>
+    <ResourceCompile>
+      <PreprocessorDefinitions>NDEBUG;%(PreprocessorDefinitions)</PreprocessorDefinitions>
+      <Culture>0x040c</Culture>
+    </ResourceCompile>
+    <Link>
+      <OutputFile>$(OutDir)zlibwapi.dll</OutputFile>
+      <SuppressStartupBanner>true</SuppressStartupBanner>
+      <IgnoreAllDefaultLibraries>false</IgnoreAllDefaultLibraries>
+      <ModuleDefinitionFile>.\zlibvc.def</ModuleDefinitionFile>
+      <ProgramDatabaseFile>$(OutDir)zlibwapi.pdb</ProgramDatabaseFile>
+      <GenerateMapFile>true</GenerateMapFile>
+      <MapFileName>$(OutDir)zlibwapi.map</MapFileName>
+      <SubSystem>Windows</SubSystem>
+      <ImportLibrary>$(OutDir)zlibwapi.lib</ImportLibrary>
+      <TargetMachine>MachineX64</TargetMachine>
+    </Link>
+  </ItemDefinitionGroup>
+  <ItemDefinitionGroup Condition="'$(Configuration)|$(Platform)'=='ReleaseWithoutAsm|Itanium'">
+    <Midl>
+      <PreprocessorDefinitions>NDEBUG;%(PreprocessorDefinitions)</PreprocessorDefinitions>
+      <MkTypLibCompatible>true</MkTypLibCompatible>
+      <SuppressStartupBanner>true</SuppressStartupBanner>
+      <TargetEnvironment>Itanium</TargetEnvironment>
+      <TypeLibraryName>$(OutDir)zlibvc.tlb</TypeLibraryName>
+    </Midl>
+    <ClCompile>
+      <InlineFunctionExpansion>OnlyExplicitInline</InlineFunctionExpansion>
+      <AdditionalIncludeDirectories>..\..\..;..\..\masmx86;%(AdditionalIncludeDirectories)</AdditionalIncludeDirectories>
+      <PreprocessorDefinitions>WIN32;_CRT_NONSTDC_NO_DEPRECATE;_CRT_SECURE_NO_DEPRECATE;_CRT_NONSTDC_NO_WARNINGS;ZLIB_WINAPI;WIN64;%(PreprocessorDefinitions)</PreprocessorDefinitions>
+      <StringPooling>true</StringPooling>
+      <ExceptionHandling>
+      </ExceptionHandling>
+      <RuntimeLibrary>MultiThreadedDLL</RuntimeLibrary>
+      <BufferSecurityCheck>false</BufferSecurityCheck>
+      <FunctionLevelLinking>true</FunctionLevelLinking>
+      <PrecompiledHeaderOutputFile>$(IntDir)zlibvc.pch</PrecompiledHeaderOutputFile>
+      <AssemblerOutput>All</AssemblerOutput>
+      <AssemblerListingLocation>$(IntDir)</AssemblerListingLocation>
+      <ObjectFileName>$(IntDir)</ObjectFileName>
+      <ProgramDataBaseFileName>$(OutDir)</ProgramDataBaseFileName>
+      <BrowseInformation>
+      </BrowseInformation>
+      <WarningLevel>Level3</WarningLevel>
+      <SuppressStartupBanner>true</SuppressStartupBanner>
+    </ClCompile>
+    <ResourceCompile>
+      <PreprocessorDefinitions>NDEBUG;%(PreprocessorDefinitions)</PreprocessorDefinitions>
+      <Culture>0x040c</Culture>
+    </ResourceCompile>
+    <Link>
+      <OutputFile>$(OutDir)zlibwapi.dll</OutputFile>
+      <SuppressStartupBanner>true</SuppressStartupBanner>
+      <IgnoreAllDefaultLibraries>false</IgnoreAllDefaultLibraries>
+      <ModuleDefinitionFile>.\zlibvc.def</ModuleDefinitionFile>
+      <ProgramDatabaseFile>$(OutDir)zlibwapi.pdb</ProgramDatabaseFile>
+      <GenerateMapFile>true</GenerateMapFile>
+      <MapFileName>$(OutDir)zlibwapi.map</MapFileName>
+      <SubSystem>Windows</SubSystem>
+      <ImportLibrary>$(OutDir)zlibwapi.lib</ImportLibrary>
+      <TargetMachine>MachineIA64</TargetMachine>
+    </Link>
+  </ItemDefinitionGroup>
+  <ItemDefinitionGroup Condition="'$(Configuration)|$(Platform)'=='Release|x64'">
+    <Midl>
+      <PreprocessorDefinitions>NDEBUG;%(PreprocessorDefinitions)</PreprocessorDefinitions>
+      <MkTypLibCompatible>true</MkTypLibCompatible>
+      <SuppressStartupBanner>true</SuppressStartupBanner>
+      <TargetEnvironment>X64</TargetEnvironment>
+      <TypeLibraryName>$(OutDir)zlibvc.tlb</TypeLibraryName>
+    </Midl>
+    <ClCompile>
+      <InlineFunctionExpansion>OnlyExplicitInline</InlineFunctionExpansion>
+      <AdditionalIncludeDirectories>..\..\..;..\..\masmx86;%(AdditionalIncludeDirectories)</AdditionalIncludeDirectories>
+      <PreprocessorDefinitions>_CRT_NONSTDC_NO_DEPRECATE;_CRT_SECURE_NO_DEPRECATE;_CRT_NONSTDC_NO_WARNINGS;ZLIB_WINAPI;ASMV;ASMINF;WIN64;%(PreprocessorDefinitions)</PreprocessorDefinitions>
+      <StringPooling>true</StringPooling>
+      <ExceptionHandling>
+      </ExceptionHandling>
+      <RuntimeLibrary>MultiThreadedDLL</RuntimeLibrary>
+      <BufferSecurityCheck>false</BufferSecurityCheck>
+      <FunctionLevelLinking>true</FunctionLevelLinking>
+      <PrecompiledHeaderOutputFile>$(IntDir)zlibvc.pch</PrecompiledHeaderOutputFile>
+      <AssemblerOutput>All</AssemblerOutput>
+      <AssemblerListingLocation>$(IntDir)</AssemblerListingLocation>
+      <ObjectFileName>$(IntDir)</ObjectFileName>
+      <ProgramDataBaseFileName>$(OutDir)</ProgramDataBaseFileName>
+      <BrowseInformation>
+      </BrowseInformation>
+      <WarningLevel>Level3</WarningLevel>
+      <SuppressStartupBanner>true</SuppressStartupBanner>
+    </ClCompile>
+    <ResourceCompile>
+      <PreprocessorDefinitions>NDEBUG;%(PreprocessorDefinitions)</PreprocessorDefinitions>
+      <Culture>0x040c</Culture>
+    </ResourceCompile>
+    <Link>
+      <AdditionalDependencies>..\..\masmx64\gvmat64.obj;..\..\masmx64\inffasx64.obj;%(AdditionalDependencies)</AdditionalDependencies>
+      <OutputFile>$(OutDir)zlibwapi.dll</OutputFile>
+      <SuppressStartupBanner>true</SuppressStartupBanner>
+      <IgnoreAllDefaultLibraries>false</IgnoreAllDefaultLibraries>
+      <ModuleDefinitionFile>.\zlibvc.def</ModuleDefinitionFile>
+      <ProgramDatabaseFile>$(OutDir)zlibwapi.pdb</ProgramDatabaseFile>
+      <GenerateMapFile>true</GenerateMapFile>
+      <MapFileName>$(OutDir)zlibwapi.map</MapFileName>
+      <SubSystem>Windows</SubSystem>
+      <ImportLibrary>$(OutDir)zlibwapi.lib</ImportLibrary>
+      <TargetMachine>MachineX64</TargetMachine>
+    </Link>
+  </ItemDefinitionGroup>
+  <ItemDefinitionGroup Condition="'$(Configuration)|$(Platform)'=='Release|Itanium'">
+    <Midl>
+      <PreprocessorDefinitions>NDEBUG;%(PreprocessorDefinitions)</PreprocessorDefinitions>
+      <MkTypLibCompatible>true</MkTypLibCompatible>
+      <SuppressStartupBanner>true</SuppressStartupBanner>
+      <TargetEnvironment>Itanium</TargetEnvironment>
+      <TypeLibraryName>$(OutDir)zlibvc.tlb</TypeLibraryName>
+    </Midl>
+    <ClCompile>
+      <InlineFunctionExpansion>OnlyExplicitInline</InlineFunctionExpansion>
+      <AdditionalIncludeDirectories>..\..\..;..\..\masmx86;%(AdditionalIncludeDirectories)</AdditionalIncludeDirectories>
+      <PreprocessorDefinitions>_CRT_NONSTDC_NO_DEPRECATE;_CRT_SECURE_NO_DEPRECATE;_CRT_NONSTDC_NO_WARNINGS;ZLIB_WINAPI;WIN64;%(PreprocessorDefinitions)</PreprocessorDefinitions>
+      <StringPooling>true</StringPooling>
+      <ExceptionHandling>
+      </ExceptionHandling>
+      <RuntimeLibrary>MultiThreadedDLL</RuntimeLibrary>
+      <BufferSecurityCheck>false</BufferSecurityCheck>
+      <FunctionLevelLinking>true</FunctionLevelLinking>
+      <PrecompiledHeaderOutputFile>$(IntDir)zlibvc.pch</PrecompiledHeaderOutputFile>
+      <AssemblerOutput>All</AssemblerOutput>
+      <AssemblerListingLocation>$(IntDir)</AssemblerListingLocation>
+      <ObjectFileName>$(IntDir)</ObjectFileName>
+      <ProgramDataBaseFileName>$(OutDir)</ProgramDataBaseFileName>
+      <BrowseInformation>
+      </BrowseInformation>
+      <WarningLevel>Level3</WarningLevel>
+      <SuppressStartupBanner>true</SuppressStartupBanner>
+    </ClCompile>
+    <ResourceCompile>
+      <PreprocessorDefinitions>NDEBUG;%(PreprocessorDefinitions)</PreprocessorDefinitions>
+      <Culture>0x040c</Culture>
+    </ResourceCompile>
+    <Link>
+      <OutputFile>$(OutDir)zlibwapi.dll</OutputFile>
+      <SuppressStartupBanner>true</SuppressStartupBanner>
+      <IgnoreAllDefaultLibraries>false</IgnoreAllDefaultLibraries>
+      <ModuleDefinitionFile>.\zlibvc.def</ModuleDefinitionFile>
+      <ProgramDatabaseFile>$(OutDir)zlibwapi.pdb</ProgramDatabaseFile>
+      <GenerateMapFile>true</GenerateMapFile>
+      <MapFileName>$(OutDir)zlibwapi.map</MapFileName>
+      <SubSystem>Windows</SubSystem>
+      <ImportLibrary>$(OutDir)zlibwapi.lib</ImportLibrary>
+      <TargetMachine>MachineIA64</TargetMachine>
+    </Link>
+  </ItemDefinitionGroup>
+  <ItemGroup>
+    <ClCompile Include="..\..\..\adler32.c" />
+    <ClCompile Include="..\..\..\compress.c" />
+    <ClCompile Include="..\..\..\crc32.c" />
+    <ClCompile Include="..\..\..\deflate.c" />
+    <ClCompile Include="..\..\..\gzclose.c" />
+    <ClCompile Include="..\..\..\gzlib.c" />
+    <ClCompile Include="..\..\..\gzread.c" />
+    <ClCompile Include="..\..\..\gzwrite.c" />
+    <ClCompile Include="..\..\..\infback.c" />
+    <ClCompile Include="..\..\masmx64\inffas8664.c">
+      <ExcludedFromBuild Condition="'$(Configuration)|$(Platform)'=='Debug|Itanium'">true</ExcludedFromBuild>
+      <ExcludedFromBuild Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'">true</ExcludedFromBuild>
+      <ExcludedFromBuild Condition="'$(Configuration)|$(Platform)'=='ReleaseWithoutAsm|Itanium'">true</ExcludedFromBuild>
+      <ExcludedFromBuild Condition="'$(Configuration)|$(Platform)'=='ReleaseWithoutAsm|Win32'">true</ExcludedFromBuild>
+      <ExcludedFromBuild Condition="'$(Configuration)|$(Platform)'=='Release|Itanium'">true</ExcludedFromBuild>
+      <ExcludedFromBuild Condition="'$(Configuration)|$(Platform)'=='Release|Win32'">true</ExcludedFromBuild>
+    </ClCompile>
+    <ClCompile Include="..\..\..\inffast.c" />
+    <ClCompile Include="..\..\..\inflate.c" />
+    <ClCompile Include="..\..\..\inftrees.c" />
+    <ClCompile Include="..\..\minizip\ioapi.c" />
+    <ClCompile Include="..\..\minizip\iowin32.c" />
+    <ClCompile Include="..\..\..\trees.c" />
+    <ClCompile Include="..\..\..\uncompr.c" />
+    <ClCompile Include="..\..\minizip\unzip.c">
+      <AdditionalIncludeDirectories Condition="'$(Configuration)|$(Platform)'=='Release|Itanium'">%(AdditionalIncludeDirectories)</AdditionalIncludeDirectories>
+      <PreprocessorDefinitions Condition="'$(Configuration)|$(Platform)'=='Release|Itanium'">ZLIB_INTERNAL;%(PreprocessorDefinitions)</PreprocessorDefinitions>
+      <AdditionalIncludeDirectories Condition="'$(Configuration)|$(Platform)'=='Release|Win32'">%(AdditionalIncludeDirectories)</AdditionalIncludeDirectories>
+      <PreprocessorDefinitions Condition="'$(Configuration)|$(Platform)'=='Release|Win32'">ZLIB_INTERNAL;%(PreprocessorDefinitions)</PreprocessorDefinitions>
+      <AdditionalIncludeDirectories Condition="'$(Configuration)|$(Platform)'=='Release|x64'">%(AdditionalIncludeDirectories)</AdditionalIncludeDirectories>
+      <PreprocessorDefinitions Condition="'$(Configuration)|$(Platform)'=='Release|x64'">ZLIB_INTERNAL;%(PreprocessorDefinitions)</PreprocessorDefinitions>
+    </ClCompile>
+    <ClCompile Include="..\..\minizip\zip.c">
+      <AdditionalIncludeDirectories Condition="'$(Configuration)|$(Platform)'=='Release|Itanium'">%(AdditionalIncludeDirectories)</AdditionalIncludeDirectories>
+      <PreprocessorDefinitions Condition="'$(Configuration)|$(Platform)'=='Release|Itanium'">ZLIB_INTERNAL;%(PreprocessorDefinitions)</PreprocessorDefinitions>
+      <AdditionalIncludeDirectories Condition="'$(Configuration)|$(Platform)'=='Release|Win32'">%(AdditionalIncludeDirectories)</AdditionalIncludeDirectories>
+      <PreprocessorDefinitions Condition="'$(Configuration)|$(Platform)'=='Release|Win32'">ZLIB_INTERNAL;%(PreprocessorDefinitions)</PreprocessorDefinitions>
+      <AdditionalIncludeDirectories Condition="'$(Configuration)|$(Platform)'=='Release|x64'">%(AdditionalIncludeDirectories)</AdditionalIncludeDirectories>
+      <PreprocessorDefinitions Condition="'$(Configuration)|$(Platform)'=='Release|x64'">ZLIB_INTERNAL;%(PreprocessorDefinitions)</PreprocessorDefinitions>
+    </ClCompile>
+    <ClCompile Include="..\..\..\zutil.c" />
+  </ItemGroup>
+  <ItemGroup>
+    <ResourceCompile Include="zlib.rc" />
+  </ItemGroup>
+  <ItemGroup>
+    <None Include="zlibvc.def" />
+  </ItemGroup>
+  <ItemGroup>
+    <ClInclude Include="..\..\..\deflate.h" />
+    <ClInclude Include="..\..\..\infblock.h" />
+    <ClInclude Include="..\..\..\infcodes.h" />
+    <ClInclude Include="..\..\..\inffast.h" />
+    <ClInclude Include="..\..\..\inftrees.h" />
+    <ClInclude Include="..\..\..\infutil.h" />
+    <ClInclude Include="..\..\..\zconf.h" />
+    <ClInclude Include="..\..\..\zlib.h" />
+    <ClInclude Include="..\..\..\zutil.h" />
+  </ItemGroup>
+  <Import Project="$(VCTargetsPath)\Microsoft.Cpp.targets" />
+  <ImportGroup Label="ExtensionTargets">
+  </ImportGroup>
+</Project>