These tests have been failing for a long time at
http://build.chromium.org/p/client.webrtc.fyi/builders/Linux%20TsanRV
This bot runs a tool called TSan Race Verifier.
More info about Race Verifiers can be found at
https://code.google.com/p/data-race-test/wiki/RaceVerifier
By excluding the tests like this, they will also be disabled
for the normal TSan bot, where they currently pass. This shouldn't
be a problem since we have a TSan v2 bot running too (which uses
a different set of suppressions), so it should catch any newly
introduced race conditions. The TSan v2 bot will soon replace the
old TSan bot, as v1 is being deprecated.
TBR=mallinath@webrtc.org
BUG=2396
TEST=Passing run on Linux of:
GYP_DEFINES=build_with_tool=tsan gclient runhooks
ninja -C out/Release libjingle_p2p_unittest
tools/valgrind-webrtc/webrtc_tests.sh --tool=tsan_rv -b out/Release -t libjingle_p2p_unittest
Review URL: https://webrtc-codereview.appspot.com/8329005
git-svn-id: http://webrtc.googlecode.com/svn/trunk@5515 4adac7df-926f-26a2-2b94-8c16560cd09d
New errors arrived when rolling libjingle in r5502.
These suppressions are needed to green up the Memcheck and
TSan bots.
BUG=1976,2080
TEST=local runs on Linux:
tools/valgrind-webrtc/webrtc_tests.sh --tool=tsan -b out/Release -t libjingle_unittest
tools/valgrind-webrtc/webrtc_tests.sh --tool=memcheck -b out/Release -t libjingle_unittest
and trybot:
git try --bot=linux_memcheck,linux_tsan -t libjingle_unittest
TBR=wu@webrtc.org
Review URL: https://webrtc-codereview.appspot.com/8299004
git-svn-id: http://webrtc.googlecode.com/svn/trunk@5509 4adac7df-926f-26a2-2b94-8c16560cd09d
Chromium has decided to drop Coverity so
we don't have any reason for maintaining this code.
Personally, I think that from a quality perspective other tools,
like all the new compiler warnings that are constantly being added
to the Clang compiler is a better way to address dangers in the code.
The maintenance cost and overhead of such advanced tools like Coverity
is simply too high.
BUG=
R=phoglund@webrtc.org
Review URL: https://webrtc-codereview.appspot.com/7669007
git-svn-id: http://webrtc.googlecode.com/svn/trunk@5500 4adac7df-926f-26a2-2b94-8c16560cd09d
1) Change AsyncSocket's SignalReadEvent and SignalWriteEvent's thread mode to multi_threaded_local as they can be accessed from different threads.
2) Protect NATServer::TransEntry::whitelist.
3) Protect PhysicalSocket:error_.
Detail failures can be seen from issue 2080, comment #5.
TBR=fischman@webrtc.org
RISK=P1
TEST=try bots and tsanv2
BUG=2080
Review URL: https://webrtc-codereview.appspot.com/2669005
git-svn-id: http://webrtc.googlecode.com/svn/trunk@5026 4adac7df-926f-26a2-2b94-8c16560cd09d
1) init start_time_ns_ before the file_read_thread_ is started to avoid data racing as the start_time_ns_ will also be read by the file_read_thread_.
2) add CriticalSection to protect |finished_| that is accessed by FileReadThread and the main thread
Also remove the suppression for filemediaengine.cc, which has already been fixed in other cl.
TBR=henrike@webrtc.org
TEST=try bots and manual tsan v2 test
BUG=2078
Review URL: https://webrtc-codereview.appspot.com/2509004
git-svn-id: http://webrtc.googlecode.com/svn/trunk@5018 4adac7df-926f-26a2-2b94-8c16560cd09d
Update Thread documentation, fix all subclasses that had a problem.
This is to avoid a data racing between the destructor modifying the vtable, and
Thread::PreRun calling virtual method Run at the same time.
For example:
[ RUN ] FileMediaEngineTest.TestGetCapabilities
==================
WARNING: ThreadSanitizer: data race on vptr (ctor/dtor vs virtual call) (pid=2967)
Read of size 8 at 0x7d480000bd00 by thread T1:
#0 talk_base::Thread::PreRun(void*) /mnt/data/b/build/slave/Linux_Tsan_v2/build/src/out/Release/../../talk/base/thread.cc:353 (libjingle_media_unittest+0x000000234da8)
Previous write of size 8 at 0x7d480000bd00 by main thread:
#0 talk_base::Thread::~Thread() /mnt/data/b/build/slave/Linux_Tsan_v2/build/src/out/Release/../../talk/base/thread.cc:158 (libjingle_media_unittest+0x00000023478c)
#1 ~RtpSenderReceiver /mnt/data/b/build/slave/Linux_Tsan_v2/build/src/out/Release/../../talk/media/base/filemediaengine.cc:122 (libjingle_media_unittest+0x0000001b551f)
...
RISK=P2
TESTED=try bots and tsan
BUG=2078,2080
R=fischman@webrtc.org
Review URL: https://webrtc-codereview.appspot.com/2428004
git-svn-id: http://webrtc.googlecode.com/svn/trunk@4999 4adac7df-926f-26a2-2b94-8c16560cd09d
Turns out I was running libjingle_unittest
instead of libjingle_peerconnection_unittest
on the bot machine when I was verifying the
suppressions added in r4991 on the bot.
This will hopefully be the last round.
BUG=2528
TEST=running libjingle_unittest with these
suppressions applied locally on the bot.
TBR=phoglund@webrtc.org
Review URL: https://webrtc-codereview.appspot.com/2426004
git-svn-id: http://webrtc.googlecode.com/svn/trunk@4993 4adac7df-926f-26a2-2b94-8c16560cd09d
Since we don't have a trybot for LSan, this is the only
way to resolve errors only happening on the bots
(except running at the bot themselves).
I suspect some errors only occurs on the bots since
the compiler version differs (4.6 on bots, 4.6.3 on
my machine).
This last suppressions round was tested on an actual
Chrome infra VM as well, with no errors.
BUG=2528
TEST=ran successfully on the bot.
TBR=phoglund@webrtc.org
Review URL: https://webrtc-codereview.appspot.com/2424004
git-svn-id: http://webrtc.googlecode.com/svn/trunk@4991 4adac7df-926f-26a2-2b94-8c16560cd09d
The suppressions in r4988 were not enough to green
up the LSan+ASan bot.
Here's another round of suppressions to get the bot green
which I have tested multiple runs without any leaks reported.
BUG=2527,2528
TEST=
GYP_DEFINES='asan=1 lsan=1 linux_use_tcmalloc=0 release_extra_cflags="-gline-tables-only"' gclient runhooks
ninja -C out/Release libjingle_unittest
export ASAN_SYMBOLIZER_PATH=`(pwd)`/third_party/llvm-build/Release+Asserts/bin/llvm-symbolizer
export ASAN_OPTIONS="detect_leaks=1 strict_memcmp=0"
export LSAN_OPTIONS="suppressions=tools/lsan/suppressions.txt"
out/Release/libjingle_peerconnection_unittest
out/Release/libjingle_unittest
TBR=phoglund@webrtc.org
Review URL: https://webrtc-codereview.appspot.com/2422004
git-svn-id: http://webrtc.googlecode.com/svn/trunk@4990 4adac7df-926f-26a2-2b94-8c16560cd09d
Add suppressions for libjingle tests so they pass under TSan v2.
Disable the following tests for TSan v2 (only) since they're failing:
* StunServerTest.TestGood
* JsepPeerConnectionP2PTestClient.*
See build logs at:
http://build.chromium.org/p/client.webrtc.fyi/builders/Linux%20Tsan%20v2/
for more details.
BUG=1205,2078,2079,2080,2517
TEST=Ran a successful run of each test locally on Linux using:
GYP_DEFINES='tsan=1 linux_use_tcmalloc=0 release_extra_cflags="-gline-tables-only"' gclient runhooks
ninja -C out/Release
For each test, run standing in trunk/:
TSAN_OPTIONS="suppressions=tools/valgrind-webrtc/tsan_v2/suppressions.txt print_suppressions=1 report_signal_unsafe=0 report_thread_leaks=0 history_size=7" out/Release/[libjingle_testname]
R=wu@webrtc.org
Review URL: https://webrtc-codereview.appspot.com/2411004
git-svn-id: http://webrtc.googlecode.com/svn/trunk@4977 4adac7df-926f-26a2-2b94-8c16560cd09d
In https://codereview.chromium.org/26190002 Chromium
started a cleanup of their wrapper script, by adding
the --target flag and start passing build dir similar
to how the bots are setting it (i.e. pass out and not
out/Release).
This CL adds --target support for our wrapper script,
without changing the existing behavior (I'll do a
larger update at a later stage).
BUG=none
TEST=Ran the following successfully:
tools/valgrind-webrtc/webrtc_tests.sh --build_dir out/Release --target Release --test test_support_unittests
tools/valgrind-webrtc/webrtc_tests.sh --build_dir out --target Release --test test_support_unittests
tools/valgrind-webrtc/webrtc_tests.sh --target Release --test out/Release/test_support_unittests
TBR=phoglund@webrtc.org
Review URL: https://webrtc-codereview.appspot.com/2396004
git-svn-id: http://webrtc.googlecode.com/svn/trunk@4957 4adac7df-926f-26a2-2b94-8c16560cd09d
When WebRTC is built as a part of Chromium, some of
the stuff in webrtc.gyp will not be found. This CL
fixes this.
TEST=trybots passing. I also did some manual builds for Android with the android_builder_webrtc target in build/all_android.gyp of a Chromium checkout.
BUG=chromium:304143
R=andrew@webrtc.org
Review URL: https://webrtc-codereview.appspot.com/2353004
git-svn-id: http://webrtc.googlecode.com/svn/trunk@4949 4adac7df-926f-26a2-2b94-8c16560cd09d
a different thread.
One example is the _playWarning can be changed in AudioDeviceLinuxALSA::Init, which is called on the application's thread. At the same time it can be read via PlayoutWarning() on the VoE's process_thread.
RISK=P2
TESTED=try bots and tsan test:
tools/valgrind-webrtc/webrtc_tests.sh --tool=tsan -t out/Debug/libjingle_peerconnection_unittest --gtest_filter=PeerConnectionFactoryTestInternal.CreatePCUsingInternalModules
BUG=1205
R=xians@webrtc.org
Review URL: https://webrtc-codereview.appspot.com/2315004
git-svn-id: http://webrtc.googlecode.com/svn/trunk@4866 4adac7df-926f-26a2-2b94-8c16560cd09d
Implements the ExternalVideoDecoder interface for VideoReceiveStream.
Also adds a FakeDecoder used in tests, removing the overhead of running
the EngineTest tests with VP8 under Memcheck/TSan, allowing us to enable
them under Memcheck/TSan as well.
BUG=2346,2312
R=stefan@webrtc.org
Review URL: https://webrtc-codereview.appspot.com/2172004
git-svn-id: http://webrtc.googlecode.com/svn/trunk@4702 4adac7df-926f-26a2-2b94-8c16560cd09d
I mistakenly ommitted the checks when logging.h was ported from
libjingle to webrtc. This caused a significant CPU cost for logs which
were later filtered out anyway.
Verified with LS_VERBOSE logging in neteq4, running:
$ out/Release/modules_unittests \
--gtest_filter=NetEqDecodingTest.TestBitExactness \
--gtest_repeat=50 > time.txt
$ grep "case ran" time.txt | grep "[0-9]* ms" -o | sort
Results on a MacBook Retina, averaged over 5 runs:
Verbose logs disabled: 666 ms
Exisiting implementation, verbose logs enabled: 944 ms (1.42x)
New implementation, verbose logs enabled: 673 ms (1.01x)
BUG=2314
R=henrik.lundin@webrtc.org, henrike@webrtc.org, kjellander@webrtc.org, turaj@webrtc.org
Review URL: https://webrtc-codereview.appspot.com/2160005
git-svn-id: http://webrtc.googlecode.com/svn/trunk@4682 4adac7df-926f-26a2-2b94-8c16560cd09d
This test goes into an eternal loop sometimes when run under
TSan v2, therefore I'm disabling it until this is resolved.
Doing that, the TSan v2 bot in our new WebRTC FYI waterfall at
http://build.chromium.org/p/client.webrtc.fyi/waterfall
will hopefully go green.
The define used only exists for TSan v2, so v1 should be
unaffected.
The suppression added in http://review.webrtc.org/2126005/
turns out actually has no effect, so I'm removing it again.
It's probably useless since TSan v2 obviously alters the code's
behavior, causing these errors. Since the errors are not TSan v2
failures, the suppression has no effect.
BUG=2259
TEST=test passing locally when run as described in 2259 (since
no tests are run).
R=tommi@webrtc.org
Review URL: https://webrtc-codereview.appspot.com/2115005
git-svn-id: http://webrtc.googlecode.com/svn/trunk@4639 4adac7df-926f-26a2-2b94-8c16560cd09d
This test goes into an eternal loop sometimes when run under
TSan v2, therefore I'm disabling it until this is resolved.
Doing that, our new WebRTC FYI waterfall with a TSan v2 bot will hopefully go green when deployed (see https://codereview.chromium.org/23231004)
The define used only exists for TSan v2, so v1 should be
unaffected.
BUG=2259
TEST=test passing locally when run as described in 2259 (since
no tests are run).
R=tommi@webrtc.org
Review URL: https://webrtc-codereview.appspot.com/2126005
git-svn-id: http://webrtc.googlecode.com/svn/trunk@4635 4adac7df-926f-26a2-2b94-8c16560cd09d
A new test target named 'modules_integrationtests' is created
and the following test targets were merged into it:
* audio_coding_module_test
* test_fec
* video_coding_integrationtests
* vp8_integrationtests
A couple of other targets were merged into modules_unittests:
* audio_coding_unittests
* audioproc_unittest
* common_unittests
* video_coding_unittests
* video_processing_unittests
* vp8_unittests
I wasn't able to merge audio_decoder_unittests and neteq_unittests due to
conflicts with different defines in these tests.
Some tests that have special requirements aren't merged into
modules_integrationtests yet. I took the opportunity to rename them
since the bot configs will need to be update anyway:
* audio_device_test_api -> audio_device_integrationtests
* video_capture_module_test -> video_capture_integrationtests
* video_render_module_test -> video_render_integrationtests
Exclude files were added for modules_integrationtests to make sure
the memcheck and tsan bots doesn't tests that are too slow
(audio_coding_module_test and vp8_integrationtests were previously
disabled on those bots).
Suppressions for AudioCodingModuleTest needed to be added to get
modules_integrationtests to pass memcheck (even if the test is
excluded from execution).
BUG=1843
TEST=local execution on Linux and trybots (passing except the merged tests of course)
R=andrew@webrtc.org, tina.legrand@webrtc.org
Review URL: https://webrtc-codereview.appspot.com/1656004
git-svn-id: http://webrtc.googlecode.com/svn/trunk@4228 4adac7df-926f-26a2-2b94-8c16560cd09d
This CL will lower the number of test targets in WebRTC by:
Add common_audio_unittests and merge the following targets into it (copied from http://review.webrtc.org/1584006):
* resampler_unittests
* signal_processing_unittests
* vad_unittests
Merge into modules_unittests:
* bitrate_controller_unittests
* desktop_capture_unittests
* media_file_unittests
* remote_bitrate_estimator_unittests
* rtp_rtcp_unittests
* paced_sender_unittests
Merge into test_support_unittests:
* channel_transport_unittests
channel_transport.gyp was also removed in favor for test.gyp.
I had to remove a main method from rtcp_format_remb_unittest.cc
since it caused the fileutils.h code to not be able to find the
right project root path in ordrer to provide correct paths
to test files.
Buildbot configuration update will be synced with the commit of this CL.
TEST=trybots
BUG=1843
R=andrew@webrtc.org
Review URL: https://webrtc-codereview.appspot.com/1639004
git-svn-id: http://webrtc.googlecode.com/svn/trunk@4213 4adac7df-926f-26a2-2b94-8c16560cd09d
By using the C++ version of Zxing, we can avoid having Java and Ant
as a dependency when running Video quality analysis on the bots.
This makes it far more easy to setup automation on new machines.
I also moved the scripts into the webrtc/ folder so it will be synced by default when building in Chrome (eliminating the need of a separate solution).
This CL also removes the need of the FFMPEG_HOME variable and replaces
its use with a command line flag to make the tool run smoothly on
Windows.
BUG=none
TEST=locally running the script on Windows, Mac and Linux.
Review URL: https://webrtc-codereview.appspot.com/1099007
git-svn-id: http://webrtc.googlecode.com/svn/trunk@3640 4adac7df-926f-26a2-2b94-8c16560cd09d
- Added pipe rule flush handling
- Also fixed a bug preventing any rule settings other than default from being
used no matter what preset was chosen
- Fixed some comments.
BUGS=none
TEST= Windows and linux
Review URL: https://webrtc-codereview.appspot.com/1158006
git-svn-id: http://webrtc.googlecode.com/svn/trunk@3639 4adac7df-926f-26a2-2b94-8c16560cd09d
Due to a bug in the RTP module, which appeared during packet loss, we have had too short delay in the Win Large Test. When the bug was fixed we had a regression error that should be fixed with this update.
Review URL: https://webrtc-codereview.appspot.com/1091005
git-svn-id: http://webrtc.googlecode.com/svn/trunk@3466 4adac7df-926f-26a2-2b94-8c16560cd09d
The change in r3354 caused the --tool argument to not be parsed if it's passed after the test executable. Then it's considered an argument to the test rather than a script flag.
This CL cleans the code a bit and makes it possible to pass all the supported argument in the different ways possible.
NOTICE: To pass arguments to the test executable, you must use the -- argument must be specified before the test arguments start, to signal that everything that comes after it are positional arguments only (which are passed on to the test during execution).
BUG=none
TEST=The following combinations have been tested:
tools/valgrind-webrtc/webrtc_tests.sh -b out/Debug -t test_support_unittests --tool asan
tools/valgrind-webrtc/webrtc_tests.sh -b out/Debug -t test_support_unittests --tool asan -- --foo --bar
tools/valgrind-webrtc/webrtc_tests.sh --tool asan -b out/Debug -t test_support_unittests
tools/valgrind-webrtc/webrtc_tests.sh --tool asan -b out/Debug -t test_support_unittests -- --foo --bar
Review URL: https://webrtc-codereview.appspot.com/1026005
git-svn-id: http://webrtc.googlecode.com/svn/trunk@3355 4adac7df-926f-26a2-2b94-8c16560cd09d
* Clarified that the test only supports specifying a single test (multiple didn't work before, so better not claim to support it).
* No longer needs test executable arguments to use ++ instead of --
* Only appends the build_dir path to the test executable if not already
present.
* Simplified suppression path handling.
* Fixed crash when -v was used (import logging was missing)
* Style fixes.
* Thorougly tested with all the supported flags.
I noted that the --gtest_filter flag does not work as expected (it's
only for 'additional gtest_filter arguments', which seems to mean
additional arguments to the gtest filter text files that are used by
Chrome. I left it in here anyway. If --gtest_filter is given after the
test executable it will work, since those arguments are added straight
to the test executable
the test
BUG=none
TEST=I ran the following commands and verified that the suppressions and flags were handled correct:
tools/valgrind-webrtc/webrtc_tests.sh -v --gtest_repeat=2 --keep_logs --tool_flags=--trace-children=yes -t out/Debug/test_support_unittests --foo --bar
tools/valgrind-webrtc/webrtc_tests.sh -v --gtest_repeat=2 --keep_logs --tool_flags=--trace-children=yes -b out/Debug -t test_support_unittests --foo --bar
tools/valgrind-webrtc/webrtc_tests.sh -v --gtest_repeat=2 --keep_logs --tool_flags=--trace-children=yes -b out/Debug -t out/Debug/test_support_unittests --foo --bar
tools/valgrind-webrtc/webrtc_tests.sh -v --tool=tsan --gtest_repeat=2 --keep_logs --tool_flags=--trace-children=yes -t out/Debug/test_support_unittests --foo --bar
tools/valgrind-webrtc/webrtc_tests.sh -v --tool=tsan --gtest_repeat=2 --keep_logs --tool_flags=--trace-children=yes -b out/Debug -t test_support_unittests --foo --bar
tools/valgrind-webrtc/webrtc_tests.sh -v --tool=tsan --gtest_repeat=2 --keep_logs --tool_flags=--trace-children=yes -b out/Debug -t out/Debug/test_support_unittests --foo --bar
Review URL: https://webrtc-codereview.appspot.com/1029005
git-svn-id: http://webrtc.googlecode.com/svn/trunk@3354 4adac7df-926f-26a2-2b94-8c16560cd09d
* Improved sort checker so we sort includes more.
* Fixed vars in brackets and varsLikeTHIS.
* Added automatic x++ to ++x conversion in for loops.
TEST=Ran on various source files and verified manually.
Review URL: https://webrtc-codereview.appspot.com/1017004
git-svn-id: http://webrtc.googlecode.com/svn/trunk@3325 4adac7df-926f-26a2-2b94-8c16560cd09d
This makes it possible to compile on the bots without hardcoding paths
to Ant, Java and ffmpeg deep into the Python scripts (hardcoded paths exists only in the buildbot configuration).
For bots, the ANT_HOME, JAVA_HOME and FFMPEG_HOME environment variables must be set to the install locations for each of these dependencies, for Windows.
This CL also improves the return code handling to make failures easier to detect when things break.
TEST=running build_zxing.py without Ant or Java in the PATH, but with
ANT_HOME, JAVA_HOME and FFMPEG_HOME set. Running Chromium's src/chrome/test/functional/webrtc_video_quality.py.
BUG=none
Review URL: https://webrtc-codereview.appspot.com/1002005
git-svn-id: http://webrtc.googlecode.com/svn/trunk@3311 4adac7df-926f-26a2-2b94-8c16560cd09d
