cwebp,get_disto: fix bpp output

bits-per-pixel were intended, not bytes-per-pixel

Change-Id: I023349013ac5956154ab4526bd1e195dfe95b8ab

Android.mk

@@ -55,9 +55,6 @@ dsp_dec_srcs := \
     src/dsp/alpha_processing_neon.$(NEON) \
     src/dsp/alpha_processing_sse2.c \
     src/dsp/alpha_processing_sse41.c \
-    src/dsp/argb.c \
-    src/dsp/argb_mips_dsp_r2.c \
-    src/dsp/argb_sse2.c \
     src/dsp/cpu.c \
     src/dsp/dec.c \
     src/dsp/dec_clip_tables.c \
@@ -88,11 +85,13 @@ dsp_dec_srcs := \
     src/dsp/upsampling_msa.c \
     src/dsp/upsampling_neon.$(NEON) \
     src/dsp/upsampling_sse2.c \
+    src/dsp/upsampling_sse41.c \
     src/dsp/yuv.c \
     src/dsp/yuv_mips32.c \
     src/dsp/yuv_mips_dsp_r2.c \
     src/dsp/yuv_neon.$(NEON) \
     src/dsp/yuv_sse2.c \
+    src/dsp/yuv_sse41.c \
 
 dsp_enc_srcs := \
     src/dsp/cost.c \
@@ -124,7 +123,6 @@ enc_srcs := \
     src/enc/backward_references_enc.c \
     src/enc/config_enc.c \
     src/enc/cost_enc.c \
-    src/enc/delta_palettization_enc.c \
     src/enc/filter_enc.c \
     src/enc/frame_enc.c \
     src/enc/histogram_enc.c \

CMakeLists.txt

@@ -1,20 +1,19 @@
-cmake_minimum_required(VERSION 2.8.7)
+cmake_minimum_required(VERSION 3.5)
 
-project(libwebp C)
+project(WebP C)
 
 # Options for coder / decoder executables.
 option(WEBP_ENABLE_SIMD "Enable any SIMD optimization." ON)
-option(WEBP_ENABLE_WASM "Enable WebAssembly optimizations." OFF)
-option(WEBP_BUILD_CWEBP "Build the cwebp command line tool." OFF)
-option(WEBP_BUILD_DWEBP "Build the dwebp command line tool." OFF)
-option(WEBP_BUILD_GIF2WEBP "Build the gif2webp conversion tool." OFF)
-option(WEBP_BUILD_IMG2WEBP "Build the img2webp animation tool." OFF)
-option(WEBP_BUILD_WEBPINFO "Build the webpinfo command line tool." OFF)
+option(WEBP_BUILD_CWEBP "Build the cwebp command line tool." ON)
+option(WEBP_BUILD_DWEBP "Build the dwebp command line tool." ON)
+option(WEBP_BUILD_GIF2WEBP "Build the gif2webp conversion tool." ON)
+option(WEBP_BUILD_IMG2WEBP "Build the img2webp animation tool." ON)
+option(WEBP_BUILD_WEBPINFO "Build the webpinfo command line tool." ON)
 option(WEBP_BUILD_WEBP_JS "Emscripten build of webp.js." OFF)
-option(WEBP_EXPERIMENTAL_FEATURES "Build with experimental features." OFF)
+option(WEBP_NEAR_LOSSLESS "Enable near-lossless encoding" ON)
 option(WEBP_ENABLE_SWAP_16BIT_CSP "Enable byte swap for 16 bit colorspaces." OFF)
 
-if(WEBP_BUILD_WEBP_JS OR WEBP_ENABLE_WASM)
+if(WEBP_BUILD_WEBP_JS)
   set(WEBP_ENABLE_SIMD OFF)
 endif()
 
@@ -23,23 +22,18 @@ set(WEBP_DEP_INCLUDE_DIRS)
 
 if(NOT CMAKE_BUILD_TYPE)
   set(CMAKE_BUILD_TYPE "Release" CACHE
-    "Build type: Release, Debug or RelWithDebInfo" STRING FORCE
+    "Build type: Release, Debug, MinSizeRel or RelWithDebInfo" STRING FORCE
   )
 endif()
 
-include(cmake/config.h.cmake)
-
-# Extract the version of the library.
-file(READ ${CMAKE_CURRENT_SOURCE_DIR}/configure.ac SOURCE_FILE)
-string(REGEX MATCH "[0-9.]+" WEBP_VERSION ${SOURCE_FILE})
+# Include dependencies.
+include(cmake/deps.cmake)
+include(GNUInstallDirs)
 
 ################################################################################
 # Options.
 if(WEBP_ENABLE_SWAP_16BIT_CSP)
-  add_definitions(-DWEBP_SWAP_16BIT_CSP)
-endif()
-if(WEBP_ENABLE_WASM)
-  add_definitions(-DWEBP_USE_WASM)
+  add_definitions(-DWEBP_SWAP_16BIT_CSP=1)
 endif()
 
 ################################################################################
@@ -54,7 +48,10 @@ if(ANDROID)
   set(WEBP_DEP_INCLUDE_DIRS ${WEBP_DEP_INCLUDE_DIRS}
     ${ANDROID_NDK}/sources/android/cpufeatures
   )
-  add_definitions(-DHAVE_CPU_FEATURES_H)
+  add_definitions(-DHAVE_CPU_FEATURES_H=1)
+  set(HAVE_CPU_FEATURES_H 1)
+else()
+  set(HAVE_CPU_FEATURES_H 0)
 endif()
 
 ################################################################################
@@ -104,27 +101,76 @@ foreach(FILE ${WEBP_SIMD_FILES_NOT_TO_INCLUDE})
   list(REMOVE_ITEM WEBP_DSP_DEC_SRCS ${FILE})
 endforeach()
 
+# Generate the config.h file.
+configure_file(${CMAKE_CURRENT_LIST_DIR}/cmake/config.h.in
+  ${CMAKE_CURRENT_BINARY_DIR}/src/webp/config.h)
+add_definitions(-DHAVE_CONFIG_H)
+
 ### Define the mandatory libraries.
 # Build the webpdecoder library.
-add_definitions(-Wall)
-include_directories(${CMAKE_CURRENT_SOURCE_DIR}/src/ ${WEBP_DEP_INCLUDE_DIRS})
+if(MSVC)
+  # avoid security warnings for e.g., fopen() used in the examples.
+  add_definitions(-D_CRT_SECURE_NO_WARNINGS)
+else()
+  add_definitions(-Wall)
+endif()
+include_directories(${WEBP_DEP_INCLUDE_DIRS})
 add_library(webpdecode OBJECT ${WEBP_DEC_SRCS})
+target_include_directories(webpdecode PRIVATE ${CMAKE_CURRENT_BINARY_DIR}
+                                              ${CMAKE_CURRENT_SOURCE_DIR}
+)
 add_library(webpdspdecode OBJECT ${WEBP_DSP_COMMON_SRCS} ${WEBP_DSP_DEC_SRCS})
+target_include_directories(webpdspdecode PRIVATE ${CMAKE_CURRENT_BINARY_DIR}
+                                                 ${CMAKE_CURRENT_SOURCE_DIR}
+)
 add_library(webputilsdecode OBJECT ${WEBP_UTILS_COMMON_SRCS}
-  ${WEBP_UTILS_DEC_SRCS})
+                                   ${WEBP_UTILS_DEC_SRCS}
+)
+target_include_directories(webputilsdecode PRIVATE ${CMAKE_CURRENT_BINARY_DIR}
+                                                   ${CMAKE_CURRENT_SOURCE_DIR}
+)
 add_library(webpdecoder $<TARGET_OBJECTS:webpdecode>
   $<TARGET_OBJECTS:webpdspdecode> $<TARGET_OBJECTS:webputilsdecode>)
 target_link_libraries(webpdecoder ${WEBP_DEP_LIBRARIES})
+target_include_directories(webpdecoder
+  PRIVATE ${CMAKE_CURRENT_BINARY_DIR}
+          ${CMAKE_CURRENT_SOURCE_DIR}
+  INTERFACE $<BUILD_INTERFACE:${CMAKE_CURRENT_SOURCE_DIR}>
+            $<INSTALL_INTERFACE:${CMAKE_INSTALL_INCLUDEDIR}>
+)
+set_target_properties(webpdecoder PROPERTIES PUBLIC_HEADER
+"${CMAKE_CURRENT_SOURCE_DIR}/src/webp/decode.h;\
+${CMAKE_CURRENT_SOURCE_DIR}/src/webp/types.h"
+)
 
 # Build the webp library.
 add_library(webpencode OBJECT ${WEBP_ENC_SRCS})
+target_include_directories(webpencode PRIVATE ${CMAKE_CURRENT_BINARY_DIR}
+                                              ${CMAKE_CURRENT_SOURCE_DIR}
+)
 add_library(webpdsp OBJECT ${WEBP_DSP_COMMON_SRCS} ${WEBP_DSP_DEC_SRCS}
   ${WEBP_DSP_ENC_SRCS})
+target_include_directories(webpdsp PRIVATE ${CMAKE_CURRENT_BINARY_DIR}
+                                           ${CMAKE_CURRENT_SOURCE_DIR}
+)
 add_library(webputils OBJECT ${WEBP_UTILS_COMMON_SRCS} ${WEBP_UTILS_DEC_SRCS}
   ${WEBP_UTILS_ENC_SRCS})
+target_include_directories(webputils PRIVATE ${CMAKE_CURRENT_BINARY_DIR}
+                                             ${CMAKE_CURRENT_SOURCE_DIR}
+)
 add_library(webp $<TARGET_OBJECTS:webpdecode> $<TARGET_OBJECTS:webpdsp>
   $<TARGET_OBJECTS:webpencode> $<TARGET_OBJECTS:webputils>)
 target_link_libraries(webp ${WEBP_DEP_LIBRARIES})
+target_include_directories(webp
+                           PRIVATE ${CMAKE_CURRENT_SOURCE_DIR}
+                                   ${CMAKE_CURRENT_BINARY_DIR}
+                           PUBLIC $<INSTALL_INTERFACE:include>
+)
+set_target_properties(webp PROPERTIES PUBLIC_HEADER
+"${CMAKE_CURRENT_SOURCE_DIR}/src/webp/decode.h;\
+${CMAKE_CURRENT_SOURCE_DIR}/src/webp/encode.h;\
+${CMAKE_CURRENT_SOURCE_DIR}/src/webp/types.h"
+)
 
 # Make sure the OBJECT libraries are built with position independent code
 # (it is not ON by default).
@@ -134,6 +180,17 @@ set_target_properties(webpdecode webpdspdecode webputilsdecode
 # Build the webp demux library.
 add_library(webpdemux ${WEBP_DEMUX_SRCS})
 target_link_libraries(webpdemux webp)
+target_include_directories(webpdemux
+                           PRIVATE ${CMAKE_CURRENT_SOURCE_DIR}
+                                   ${CMAKE_CURRENT_BINARY_DIR}
+                           PUBLIC $<INSTALL_INTERFACE:include>
+)
+set_target_properties(webpdemux PROPERTIES PUBLIC_HEADER
+"${CMAKE_CURRENT_SOURCE_DIR}/src/webp/decode.h;\
+${CMAKE_CURRENT_SOURCE_DIR}/src/webp/demux.h;\
+${CMAKE_CURRENT_SOURCE_DIR}/src/webp/mux_types.h;\
+${CMAKE_CURRENT_SOURCE_DIR}/src/webp/types.h"
+)
 
 # Set the version numbers.
 function(parse_version FILE NAME VAR)
@@ -145,13 +202,13 @@ function(parse_version FILE NAME VAR)
   set(${VAR} "${VERSION}" PARENT_SCOPE)
 endfunction()
 parse_version(Makefile.am webp WEBP_WEBP_SOVERSION)
-set_target_properties(webp PROPERTIES VERSION ${WEBP_VERSION}
+set_target_properties(webp PROPERTIES VERSION ${PACKAGE_VERSION}
   SOVERSION ${WEBP_WEBP_SOVERSION})
 parse_version(Makefile.am webpdecoder WEBP_DECODER_SOVERSION)
-set_target_properties(webpdecoder PROPERTIES VERSION ${WEBP_VERSION}
+set_target_properties(webpdecoder PROPERTIES VERSION ${PACKAGE_VERSION}
   SOVERSION ${WEBP_DECODER_SOVERSION})
 parse_version(demux/Makefile.am webpdemux WEBP_DEMUX_SOVERSION)
-set_target_properties(webpdemux PROPERTIES VERSION ${WEBP_VERSION}
+set_target_properties(webpdemux PROPERTIES VERSION ${PACKAGE_VERSION}
   SOVERSION ${WEBP_DEMUX_SOVERSION})
 
 # Define the libraries to install.
@@ -167,11 +224,9 @@ math(EXPR WEBP_SIMD_FILES_TO_INCLUDE_RANGE
 foreach(I_FILE RANGE ${WEBP_SIMD_FILES_TO_INCLUDE_RANGE})
   list(GET WEBP_SIMD_FILES_TO_INCLUDE ${I_FILE} FILE)
   list(GET WEBP_SIMD_FLAGS_TO_INCLUDE ${I_FILE} SIMD_COMPILE_FLAG)
-  if(NOT ${SIMD_COMPILE_FLAG} STREQUAL "NOTFOUND")
-    set_source_files_properties(${FILE} PROPERTIES
-      COMPILE_FLAGS ${SIMD_COMPILE_FLAG}
-    )
-  endif()
+  set_source_files_properties(${FILE} PROPERTIES
+    COMPILE_FLAGS ${SIMD_COMPILE_FLAG}
+  )
 endforeach()
 
 # Build the executables if asked for.
@@ -183,6 +238,8 @@ if(WEBP_BUILD_CWEBP OR WEBP_BUILD_DWEBP OR
   list(APPEND EXAMPLEUTIL_SRCS
     ${CMAKE_CURRENT_SOURCE_DIR}/examples/stopwatch.h)
   add_library(exampleutil ${EXAMPLEUTIL_SRCS})
+  target_include_directories(exampleutil
+    PUBLIC $<BUILD_INTERFACE:${CMAKE_CURRENT_SOURCE_DIR}/src>)
 
   parse_Makefile_am(${CMAKE_CURRENT_SOURCE_DIR}/imageio "IMAGEIOUTILS_SRCS"
     "imageio_util_[^ ]*")
@@ -193,33 +250,42 @@ if(WEBP_BUILD_CWEBP OR WEBP_BUILD_DWEBP OR
   parse_Makefile_am(${CMAKE_CURRENT_SOURCE_DIR}/imageio "IMAGEDEC_SRCS"
     "imagedec_[^ ]*")
   add_library(imagedec ${IMAGEDEC_SRCS})
-  target_link_libraries(imagedec imageioutil webp ${WEBP_DEP_IMG_LIBRARIES})
+  target_link_libraries(imagedec imageioutil webpdemux webp
+    ${WEBP_DEP_IMG_LIBRARIES})
 
   # Image-encoding utility library.
   parse_Makefile_am(${CMAKE_CURRENT_SOURCE_DIR}/imageio "IMAGEENC_SRCS"
     "imageenc_[^ ]*")
   add_library(imageenc ${IMAGEENC_SRCS})
   target_link_libraries(imageenc webp)
+
+  set_property(TARGET exampleutil imageioutil imagedec imageenc
+    PROPERTY INCLUDE_DIRECTORIES
+    ${CMAKE_CURRENT_SOURCE_DIR}/src ${CMAKE_CURRENT_BINARY_DIR}/src)
 endif()
 
 if(WEBP_BUILD_DWEBP)
   # dwebp
-  include_directories(${WEBP_DEP_IMG_INCLUDE_DIRS})
   parse_Makefile_am(${CMAKE_CURRENT_SOURCE_DIR}/examples "DWEBP_SRCS"
     "dwebp")
   add_executable(dwebp ${DWEBP_SRCS})
-  target_link_libraries(dwebp exampleutil imagedec imageenc webpdecoder)
-  install(TARGETS dwebp RUNTIME DESTINATION bin)
+  target_link_libraries(dwebp exampleutil imagedec imageenc)
+  target_include_directories(dwebp PRIVATE ${CMAKE_CURRENT_BINARY_DIR}/src)
+  install(TARGETS dwebp RUNTIME DESTINATION ${CMAKE_INSTALL_BINDIR})
 endif()
 
 if(WEBP_BUILD_CWEBP)
   # cwebp
-  include_directories(${WEBP_DEP_IMG_INCLUDE_DIRS})
   parse_Makefile_am(${CMAKE_CURRENT_SOURCE_DIR}/examples "CWEBP_SRCS"
     "cwebp")
   add_executable(cwebp ${CWEBP_SRCS})
   target_link_libraries(cwebp exampleutil imagedec webp)
-  install(TARGETS cwebp RUNTIME DESTINATION bin)
+  target_include_directories(cwebp PRIVATE ${CMAKE_CURRENT_BINARY_DIR}/src)
+  install(TARGETS cwebp RUNTIME DESTINATION ${CMAKE_INSTALL_BINDIR})
+endif()
+
+if(WEBP_BUILD_GIF2WEBP AND NOT GIF_FOUND)
+  unset(WEBP_BUILD_GIF2WEBP CACHE)
 endif()
 
 if(WEBP_BUILD_GIF2WEBP OR WEBP_BUILD_IMG2WEBP)
@@ -227,9 +293,16 @@ if(WEBP_BUILD_GIF2WEBP OR WEBP_BUILD_IMG2WEBP)
     "")
   add_library(webpmux ${WEBP_MUX_SRCS})
   target_link_libraries(webpmux webp)
+  target_include_directories(webpmux
+    PRIVATE ${CMAKE_CURRENT_BINARY_DIR} ${CMAKE_CURRENT_SOURCE_DIR})
   parse_version(mux/Makefile.am webpmux WEBP_MUX_SOVERSION)
-  set_target_properties(webpmux PROPERTIES VERSION ${WEBP_VERSION}
+  set_target_properties(webpmux PROPERTIES VERSION ${PACKAGE_VERSION}
     SOVERSION ${WEBP_MUX_SOVERSION})
+  set_target_properties(webpmux PROPERTIES PUBLIC_HEADER
+"${CMAKE_CURRENT_SOURCE_DIR}/src/webp/mux.h;\
+${CMAKE_CURRENT_SOURCE_DIR}/src/webp/mux_types.h;\
+${CMAKE_CURRENT_SOURCE_DIR}/src/webp/types.h;"
+  )
   list(APPEND INSTALLED_LIBRARIES webpmux)
 endif()
 
@@ -241,7 +314,8 @@ if(WEBP_BUILD_GIF2WEBP)
   add_executable(gif2webp ${GIF2WEBP_SRCS})
   target_link_libraries(gif2webp exampleutil imageioutil webp webpmux
     ${WEBP_DEP_GIF_LIBRARIES})
-  install(TARGETS gif2webp RUNTIME DESTINATION bin)
+  target_include_directories(gif2webp PRIVATE ${CMAKE_CURRENT_BINARY_DIR}/src)
+  install(TARGETS gif2webp RUNTIME DESTINATION ${CMAKE_INSTALL_BINDIR})
 endif()
 
 if(WEBP_BUILD_IMG2WEBP)
@@ -251,7 +325,8 @@ if(WEBP_BUILD_IMG2WEBP)
     "img2webp")
   add_executable(img2webp ${IMG2WEBP_SRCS})
   target_link_libraries(img2webp exampleutil imagedec imageioutil webp webpmux)
-  install(TARGETS img2webp RUNTIME DESTINATION bin)
+  target_include_directories(img2webp PRIVATE ${CMAKE_CURRENT_BINARY_DIR}/src)
+  install(TARGETS img2webp RUNTIME DESTINATION ${CMAKE_INSTALL_BINDIR})
 endif()
 
 if (WEBP_BUILD_WEBPINFO)
@@ -261,54 +336,62 @@ if (WEBP_BUILD_WEBPINFO)
     "webpinfo")
   add_executable(webpinfo ${WEBPINFO_SRCS})
   target_link_libraries(webpinfo exampleutil imageioutil)
-  install(TARGETS webpinfo RUNTIME DESTINATION bin)
+  target_include_directories(webpinfo PRIVATE ${CMAKE_CURRENT_BINARY_DIR}/src)
+  install(TARGETS webpinfo RUNTIME DESTINATION ${CMAKE_INSTALL_BINDIR})
 endif()
 
 if(WEBP_BUILD_WEBP_JS)
   # JavaScript version
-  add_executable(webp_js
-                 ${CMAKE_CURRENT_SOURCE_DIR}/extras/webp_to_sdl.c)
+  add_executable(webp_js ${CMAKE_CURRENT_SOURCE_DIR}/extras/webp_to_sdl.c)
   target_link_libraries(webp_js webpdecoder SDL)
+  target_include_directories(webp_js PRIVATE ${CMAKE_CURRENT_BINARY_DIR})
+  set(WEBP_HAVE_SDL 1)
   set_target_properties(webp_js PROPERTIES LINK_FLAGS
-      "-s EXPORTED_FUNCTIONS='[\"_WebpToSDL\"]' -s INVOKE_RUN=0")
+      "-s EXPORTED_FUNCTIONS='[\"_WebpToSDL\"]' -s INVOKE_RUN=0 \
+       -s EXTRA_EXPORTED_RUNTIME_METHODS='[\"cwrap\"]'")
   set_target_properties(webp_js PROPERTIES OUTPUT_NAME webp)
   target_compile_definitions(webp_js PUBLIC EMSCRIPTEN WEBP_HAVE_SDL)
 
   # WASM version
-  add_executable(webp_wasm
-                 ${CMAKE_CURRENT_SOURCE_DIR}/extras/webp_to_sdl.c)
+  add_executable(webp_wasm ${CMAKE_CURRENT_SOURCE_DIR}/extras/webp_to_sdl.c)
   target_link_libraries(webp_wasm webpdecoder SDL)
+  target_include_directories(webp_wasm PRIVATE ${CMAKE_CURRENT_BINARY_DIR})
   set_target_properties(webp_wasm PROPERTIES LINK_FLAGS
       "-s WASM=1 -s 'BINARYEN_METHOD=\"native-wasm\"' \
-      -s EXPORTED_FUNCTIONS='[\"_WebpToSDL\"]' -s INVOKE_RUN=0")
+       -s EXPORTED_FUNCTIONS='[\"_WebpToSDL\"]' -s INVOKE_RUN=0 \
+       -s EXTRA_EXPORTED_RUNTIME_METHODS='[\"cwrap\"]'")
   target_compile_definitions(webp_wasm PUBLIC EMSCRIPTEN WEBP_HAVE_SDL)
 
-  target_compile_definitions(webpdecoder PUBLIC EMSCRIPTEN)
+  target_compile_definitions(webpdspdecode PUBLIC EMSCRIPTEN)
 endif()
 
 # Install the different headers and libraries.
-install(FILES ${CMAKE_CURRENT_SOURCE_DIR}/src/webp/decode.h
-              ${CMAKE_CURRENT_SOURCE_DIR}/src/webp/demux.h
-              ${CMAKE_CURRENT_SOURCE_DIR}/src/webp/encode.h
-              ${CMAKE_CURRENT_SOURCE_DIR}/src/webp/mux.h
-              ${CMAKE_CURRENT_SOURCE_DIR}/src/webp/mux_types.h
-              ${CMAKE_CURRENT_SOURCE_DIR}/src/webp/types.h
-        DESTINATION include/webp)
-install(TARGETS ${INSTALLED_LIBRARIES}
-        LIBRARY DESTINATION lib
-        ARCHIVE DESTINATION lib)
+include(GNUInstallDirs)
+install(
+  TARGETS ${INSTALLED_LIBRARIES}
+  EXPORT ${PROJECT_NAME}Targets
+  PUBLIC_HEADER DESTINATION ${CMAKE_INSTALL_INCLUDEDIR}/webp
+  INCLUDES DESTINATION ${CMAKE_INSTALL_INCLUDEDIR}
+  ARCHIVE DESTINATION ${CMAKE_INSTALL_LIBDIR}
+  LIBRARY DESTINATION ${CMAKE_INSTALL_LIBDIR}
+  RUNTIME DESTINATION ${CMAKE_INSTALL_BINDIR}
+)
+set(ConfigPackageLocation ${CMAKE_INSTALL_DATADIR}/${PROJECT_NAME}/cmake/)
+install(EXPORT ${PROJECT_NAME}Targets
+        NAMESPACE ${PROJECT_NAME}::
+        DESTINATION ${ConfigPackageLocation}
+)
 
 # Create the CMake version file.
 include(CMakePackageConfigHelpers)
 write_basic_package_version_file(
   "${CMAKE_CURRENT_BINARY_DIR}/WebPConfigVersion.cmake"
-  VERSION ${WEBP_VERSION}
+  VERSION ${PACKAGE_VERSION}
   COMPATIBILITY AnyNewerVersion
 )
 
 # Create the Config file.
 include(CMakePackageConfigHelpers)
-set(ConfigPackageLocation share/WebP/cmake/)
 configure_package_config_file(
   ${CMAKE_CURRENT_SOURCE_DIR}/cmake/WebPConfig.cmake.in
   ${CMAKE_CURRENT_BINARY_DIR}/WebPConfig.cmake
@@ -335,7 +418,7 @@ foreach(I_MAN RANGE ${MAN_PAGES_RANGE})
   if(WEBP_BUILD_${EXEC_BUILD})
     list(GET MAN_PAGES ${I_MAN} MAN_PAGE)
     install(FILES ${CMAKE_CURRENT_SOURCE_DIR}/man/${MAN_PAGE}
-      DESTINATION ${CMAKE_INSTALL_PREFIX}/share/man/man1
+      DESTINATION ${CMAKE_INSTALL_MANDIR}/man1
       COMPONENT doc
     )
   endif()

ChangeLog

@@ -1,9 +1,294 @@
+f66955de WEBP_REDUCE_CSP: restrict colorspace support
+a289d8e7 update ChangeLog (tag: v0.6.1-rc2)
+c10a493c vwebp: disable double buffering on windows & mac
+0d4466c2 webp_to_sdl.c: fix file mode
+1b27bf8b WEBP_REDUCE_SIZE: disable all rescaler code
+126be109 webpinfo: add -version option
+9add62b5 bump version to 0.6.1
+d3e26144 update NEWS
+2edda639 README: add webpinfo section
+9ca568ef Merge "right-size some tables"
+31f1995c Merge "SSE2 implementation of HasAlphaXXX"
+a80c46bd SSE2 implementation of HasAlphaXXX
+083507f2 right-size some tables
+2e5785b2 anim_utils.c: remove warning when !defined(WEBP_HAVE_GIF)
+b299c47e add WEBP_REDUCE_SIZE
+f593d71a enc: disable pic->stats/extra_info w/WEBP_DISABLE_STATS
+541179a9 Merge "predictor_enc: fix build w/--disable-near-lossless"
+5755a7ec predictor_enc: fix build w/--disable-near-lossless
+eab5bab7 add WEBP_DISABLE_STATS
+8052c585 remove some petty TODOs from vwebp.
+c245343d move LOAD8x4 and STORE8x2 closer to their use location
+b9e734fd dec,cosmetics: normalize function naming style
+c188d546 dec: harmonize function suffixes
+28c5ac81 dec_sse41: harmonize function suffixes
+e65b72a3 Merge "introduce WebPHasAlpha8b and WebPHasAlpha32b"
+b94cee98 dec_sse2: remove HE8uv_SSE2
+44a0ee3f introduce WebPHasAlpha8b and WebPHasAlpha32b
+aebf59ac Merge "WebPPictureAllocARGB: align argb allocation"
+c184665e WebPPictureAllocARGB: align argb allocation
+3daf7509 WebPParseHeaders: remove obsolete animation TODO
+80285d97 cmake: avoid security warnings under msvc
+650eac55 cmake: don't set -Wall with MSVC
+c462cd00 Remove useless code.
+01a98217 Merge "remove WebPWorkerImpl declaration from the header"
+3c49fc47 Merge "thread_utils: fix potentially bad call to Execute"
+fde2782e thread_utils: fix potentially bad call to Execute
+2a270c1d remove WebPWorkerImpl declaration from the header
+f1f437cc remove mention of 'lossy-only parameters' from the doc
+3879074d Merge "WebPMemToUint32: remove ptr cast to int"
+04b029d2 WebPMemToUint32: remove ptr cast to int
+b7971d0e dsp: avoid defining _C functions w/NEON builds
+6ba98764 webpdec: correct alloc size check w/use_argb
+5cfb3b0f normalize include guards
+f433205e Merge changes Ia17c7dfc,I75423abb,Ia2f716b4,I161caa14,I4210081a, ...
+8d033b14 {dec,enc}_neon: harmonize function suffixes x2
+0295e981 upsampling_neon: harmonize function suffixes
+d572c4e5 yuv_neon: harmonize function suffixes
+ab9c2500 rescaler_neon: harmonize function suffixes
+93e0ce27 lossless_neon: harmonize function suffixes
+22fbc50e lossless_enc_neon: harmonize function suffixes
+447875b4 filters_neon,cosmetics: fix indent
+e51bdd43 remove unused VP8TokenToStats() function
+785da7ea enc_neon: harmonize function suffixes
+bc1a251f dec_neon: harmonize function suffixes
+61e535f1 dsp/lossless: workaround gcc-4.8 bug on arm
+68b2eab7 cwebp: fix alpha reporting w/lossless & metadata
+30042faa WebPDemuxGetI: add doc details around WebPFormatFeature
+0a17f471 Merge "WIP: list includes as descendants of the project dir"
+a4399721 WIP: list includes as descendants of the project dir
+08275708 Merge "Make sure we reach the full range for alpha blending."
+d361a6a7 yuv_sse2: harmonize function suffixes
+6921aa6f upsampling_sse2: harmonize function suffixes
+08c67d3e ssim_sse2: harmonize function suffixes
+582a1b57 rescaler_sse2: harmonize function suffixes
+2c1b18ba lossless_sse2: harmonize function suffixes
+0ac46e81 lossless_enc_sse2: harmonize function suffixes
+bc634d57 enc_sse2: harmonize function suffixes
+bcb7347c dec_sse2: harmonize function suffixes
+e14ad93c Make sure we reach the full range for alpha blending.
+7038ca8d demux,StoreFrame: restore hdr size check to min req
+fb3daad6 cpu: fix ssse3 check
+be590e06 Merge "Fix CMake redefinition for HAVE_CPU_FEATURES_H"
+35f736e1 Fix CMake redefinition for HAVE_CPU_FEATURES_H
+a5216efc Fix integer overflow warning.
+a9c8916b decode.h,WebPIDecGetRGB: clarify output ptr validity
+3c74c645 gif2webp: handle 1-frame case properly + fix anim_diff
+c7f295d3 Merge "gif2webp: introduce -loop_compatibility option"
+b4e04677 gif2webp: introduce -loop_compatibility option
+f78da3de add LOCAL_CLANG_PREREQ and avoid WORK_AROUND_GCC w/3.8+
+01c426f1 define WEBP_USE_INTRINSICS w/gcc-4.9+
+8635973d use sdl-config (if available) to determine the link flags
+e9459382 use CPPFLAGS before CFLAGS
+4a9d788e Merge "Android.mk,mips: fix clang build with r15"
+4fbdc9fb Android.mk,mips: fix clang build with r15
+a80fcc4a ifdef code not used by Chrome/Android.
+3993af12 Fix signed integer overflows.
+f66f94ef anim_dump: small tool to dump frames from animated WebP
+6eba857b Merge "rationalize the Makefile.am"
+c5e34fba function definition cleanup
+3822762a rationalize the Makefile.am
+501ef6e4 configure style fix: animdiff -> anim_diff
+f8bdc268 Merge "protect against NULL dump_folder[] value in ReadAnimatedImage()"
+23bfc652 protect against NULL dump_folder[] value in ReadAnimatedImage()
+8dc3d71b cosmetics,ReadAnimatedWebP: correct function comment
+5bd40066 Merge changes I66a64a0a,I4d2e520f
+7945575c cosmetics,webpinfo: remove an else after a return
+8729fa11 cosmetics,cwebp: remove an else after a return
+f324b7f9 cosmetics: normalize fn proto & decl param names
+869eb369 CMake cleanups.
+289e62a3 Remove declaration of unimplemented VP8ApplyNearLosslessPredict
+20a94186 pnmdec,PAM: validate depth before calculating bytes_per_px
+34130afe anim_encode: fix integer overflow
+42c79aa6 Merge "Encoder: harmonize function suffixes"
+b09307dc Encoder: harmonize function suffixes
+bed0456d Merge "SSIM: harmonize the function suffix"
+54f6a3cf lossless_sse2.c: fix some missed suffix changes
+088f1dcc SSIM: harmonize the function suffix
+86fc4dd9 webpdec: use ImgIoUtilCheckSizeArgumentsOverflow
+08ea9ecd imageio: add ability restrict max image size
+6f9daa4a jpegdec,ReadError: fix leaks on error
+a0f72a4f VP8LTransformColorFunc: drop an non-respected 'const' from the signature.
+8c934902 Merge "Lossess dec: harmonize the function suffixes"
+622242aa Lossess dec: harmonize the function suffixes
+1411f027 Lossless Enc: harmonize the function suffixes
+24ad2e3c add const to two variables
+46efe062 Merge "Allow the lossless cruncher to work for alpha."
+8c3f9a47 Speed-up LZ77.
+1aef4c71 Allow the lossless cruncher to work for alpha.
+b8821dbd Improve the box LZ77 speed.
+7beed280 add missing ()s to macro parameters
+6473d20b Merge "fix Android standalone toolchain build"
+dcefed95 Merge "build.gradle: fix arm64 build"
+0c83a8bc Merge "yuv: harmonize suffix naming"
+c6d1db4b fix Android standalone toolchain build
+663a6d9d unify the ALTERNATE_CODE flag usage
+73ea9f27 yuv: harmonize suffix naming
+c71b68ac build.gradle: fix arm64 build
+c4568b47 Rescaler: harmonize the suffix naming
+6cb13b05 Merge "alpha_processing: harmonize the naming suffixes to be _C()"
+83a3e69a Merge "simplify WEBP_EXTERN macro"
+7295fde2 Merge "filters: harmonize the suffixes naming to _SSE2(), _C(), etc."
+8e42ba4c simplify WEBP_EXTERN macro
+331ab34b cost*.c: harmonize the suffix namings
+b161f670 filters: harmonize the suffixes naming to _SSE2(), _C(), etc.
+dec5e4d3 alpha_processing: harmonize the naming suffixes to be _C()
+6878d427 fix memory leak in SDL_Init()
+461ae555 Merge "configure: fix warnings in sdl check"
+62486a22 configure: test for -Wundef
+92982609 dsp.h: fix -Wundef w/__mips_dsp_rev
+0265cede configure: fix warnings in sdl check
+88c73d8a backward_references_enc.h: fix WINDOW_SIZE_BITS check
+4ea49f6b rescaler_sse2.c: fix WEBP_RESCALER_FIX -> _RFIX typo
+1b526638 Clean-up some CMake
+87f57a4b Merge "cmake: fix gif lib detection when cross compiling"
+b34a9db1 cosmetics,dec_sse2: remove some redundant comments
+471c5755 cmake: fix gif lib detection when cross compiling
+c793417a cmake: disable gif2webp if gif lib isn't found
+dcbc1c88 cmake: split gif detection from IMG deps
+66ad84f0 Merge "muxread: remove unreachable code"
+50ec3ab7 muxread: remove unreachable code
+7d67a164 Lossy encoding: smoothen transparent areas to improve compression
+e50650c7 Merge "fix signature for DISABLE_TOKEN_BUFFER compilation"
+671d2567 fix signature for DISABLE_TOKEN_BUFFER compilation
+d6755580 cpu.cmake: use unique flag to test simd disable flags
+28914528 Merge "Remove the argb* files."
+8acb4942 Remove the argb* files.
+3b62347b README: correct cmake invocation note
+7ca0df13 Have the SSE2 version of PackARGB use common code.
+7b250459 Merge "Re-use the transformed image when trying several LZ77 in lossless."
+e132072f Re-use the transformed image when trying several LZ77 in lossless.
+5d7a50ef Get code to compile in C++.
+7b012987 configure: test for -Wparentheses-equality
+f0569adb Fix man pages for multi-threading.
+f1d5a397 multithread cruncher: only copy stats when picture->stats != NULL
+f8c2ac15 Multi-thread the lossless cruncher.
+a88c6522 Merge "Integrate a new LZ77 looking for matches in the neighborhood of a pixel only."
+8f6df1d0 Unroll Predictors 10, 11 and 12.
+355c3d1b Integrate a new LZ77 looking for matches in the neighborhood of a pixel only.
+a1779a01 Refactor LZ77 handling in preparation for a new method.
+67de68b5 Android.mk/build.gradle: fix mips build with clang from r14b
+f209a548 Use the plane code and not the distance when computing statistics.
+b903b80c Split cost-based backward references in its own file.
+498cad34 Cosmetic changes in backward reference.
+e4eb4587 lossless, VP8LTransformColor_C: make sure no overflow happens with colors.
+af6deaff webpinfo: handle alpha flag mismatch
+7caef29b Fix typo that creeped in.
+39e19f92 Merge "near lossless: fix unsigned int overflow warnings."
+9bbc0891 near lossless: fix unsigned int overflow warnings.
+e1118d62 Merge "cosmetics,FindClosestDiscretized: use uint in mask creation"
+186bc9b7 Merge "webpinfo: tolerate ALPH+VP8L"
+b5887297 cosmetics,FindClosestDiscretized: use uint in mask creation
+f1784aee near_lossless,FindClosestDiscretized: use unsigned ops
+0d20abb3 webpinfo: tolerate ALPH+VP8L
+972104b3 webpmux: tolerate false positive Alpha flag
+dd7e83cc tiffdec,ReadTIFF: ensure data_size is < tsize_t max
+d988eb7b tiffdec,MyRead: quiet -Wshorten-64-to-32 warning
+dabda707 webpinfo: add support to parse Alpha bitstream
+4c117643 webpinfo: correct background color output, BGRA->ARGB
+defc98d7 Doc: clarify the role of quality in WebPConfig.
+d78ff780 Merge "Fix code to compile with C++."
+c8f14093 Fix code to compile with C++.
+497dc6a7 pnmdec: sanitize invalid header output
+d78e5867 Merge "configure: test for -Wconstant-conversion"
+481e91eb Merge "pnmdec,PAM: set bytes_per_px based on depth when missing"
+93b12753 configure: test for -Wconstant-conversion
+645f0c53 pnmdec,PAM: set bytes_per_px based on depth when missing
+e9154605 Merge "vwebp: activate GLUT double-buffering"
+818d795b vwebp: activate GLUT double-buffering
+d63e6f4b Add a man page for webpinfo
+4d708435 Merge "NEON: implement ConvertRGB24ToY/BGR24/ARGB/RGBA32ToUV/ARGBToUV"
+faf42213 NEON: implement ConvertRGB24ToY/BGR24/ARGB/RGBA32ToUV/ARGBToUV
+b4d576fa Install man pages with CMake.
+cbc1b921 webpinfo: add features to parse bitstream header
+e644c556 Fix bad bit writer initialization.
+b62cdad2 Merge "Implement a cruncher for lossless at method 6."
+da3e4dfb use the exact constant for the gamma transfer function
+a9c701e0 Merge "tiffdec: fix EXTRASAMPLES check"
+adab8ce0 Implement a cruncher for lossless at method 6.
+1b92b237 Merge "Fix VP8ApplyNearLossless to respect const and stride."
+1923ff02 tiffdec: fix EXTRASAMPLES check
+97cce5ba tiffdec: only request EXTRASAMPLES w/> 3 samples/px
+0dcd85b6 Fix VP8ApplyNearLossless to respect const and stride.
+f7682189 yuv: rationalize the C/SSE2 function naming
+52245424 NEON implementation of some Sharp-YUV420 functions
+690efd82 Avoid several backward reference copies.
+4bb1f607 src/dec/vp8_dec.h, cosmetics: fix comments
+285748be cmake: build/install webpinfo
+78fd199c backward_references_enc.c: clear -Wshadow warnings
+ae836410 WebPLog2FloorC: clear -Wshadow warning
+d0b7404e Merge "WASM support"
+134e314f WASM support
+c08adb6f Merge "VP8LEnc: remove use of BitsLog2Ceiling()"
+28c37ebd VP8LEnc: remove use of BitsLog2Ceiling()
+2cb58ab2 webpinfo: output format as a human readable string
+bb175a93 Merge "rename some symbols clashing with MSVC headers"
+39eda658 Remove a duplicated pixel hash implementation.
+36b8274d rename some symbols clashing with MSVC headers
+274daf54 Add webpinfo tool.
+ec5036e4 add explicit reference to /usr/local/{lib,inc}
+18f0dfac Merge "fix TIFF encoder regarding rgbA/RGBA"
+4e2b0b50 Merge "webpdec.h: fix a doc typo"
+e2eeabff Merge "Install binaries, libraries and headers in CMake."
+836607e6 webpdec.h: fix a doc typo
+9273e441 fix TIFF encoder regarding rgbA/RGBA
+17e3c11f Add limited PAM decoding support
+5f624871 Install binaries, libraries and headers in CMake.
+976adac1 Merge "lossless incremental decoding: fix missing eos_ test"
+f8fad4fa lossless incremental decoding: fix missing eos_ test
+27415d41 Merge "vwebp_sdl: fix the makefile.unix"
+49566182 Merge "ImgIoUtilWriteFile(): use ImgIoUtilSetBinaryMode"
+6f75a51b Analyze the transform entropy on the whole image.
+a5e4e3af Use palette only if we can in entropy analysis.
+75a9c3c4 Improve compression by better entropy analysis.
+39cf6f4f vwebp_sdl: fix the makefile.unix
+699b0416 ImgIoUtilWriteFile(): use ImgIoUtilSetBinaryMode
+7d985bd1 Fix small entropy analysis bug.
+6e7caf06 Optimize the color cache size.
+833c9219 More efficient stochastic histogram merge.
+5183326b Refactor the greedy histogram merge.
+99f6f462 Merge "histogram_enc.c,MyRand: s/ul/u/ for unsigned constants"
+80a22186 ssim.c: remove dead include
+a128dfff histogram_enc.c,MyRand: s/ul/u/ for unsigned constants
+693bf74e move the SSIM calculation code in ssim.c / ssim_sse2.c
+10d791ca Merge "Fix the random generator in HistogramCombineStochastic."
+fa63a966 Fix the random generator in HistogramCombineStochastic.
+16be192f VP8LSetBitPos: remove the eos_ setting
+027151ca don't erase the surface before blitting.
+4105d565 disable WEBP_USE_XXX optimisations when EMSCRIPTEN is defined
+9ee32a75 Merge "WebP-JS: emscripten-based Javascript decoder"
+ca9f7b7d WebP-JS: emscripten-based Javascript decoder
+868aa690 Perform greedy histogram merge in a unified way.
+5b393f2d Merge "fix path typo for vwebp_sdl in Makefile.vc"
+e0012bea CMake: only use libwebpdecoder for building dwebp
+84c2a7b0 fix path typo for vwebp_sdl in Makefile.vc
+1b0e4abf Merge "Add a flag to disable SIMD optimizations."
+32263250 Add a flag to disable SIMD optimizations.
+b494fdec optimize the ARGB->ARGB Import to use memcpy
+f1536039 Merge "ReadWebP: decode directly into a pre-allocated buffer"
+e69ed291 ReadWebP: decode directly into a pre-allocated buffer
+57d8de8a Merge "vwebp_sdl: simple viewer based on SDL"
+5cfd4ebc LZ77 interval speedups. Faster, smaller, simpler.
+1e7ad88b PNM header decoder: add some basic numerical validation
+17c7890c Merge "Add a decoder only library for WebP in CMake."
+be733786 Merge "Add clang build fix for MSA"
+03cda0e4 Add a decoder only library for WebP in CMake.
+aa893914 Add clang build fix for MSA
+31a92e97 Merge "imageio: add limited PNM support for reading"
+dcf9d82a imageio: add limited PNM support for reading
+6524fcd6 vwebp_sdl: simple viewer based on SDL
+6cf24a24 get_disto: fix reference file read
+43d472aa Merge tag 'v0.6.0'
+50d1a848 update ChangeLog (tag: v0.6.0, origin/0.6.0, 0.6.0)
 20a7fea0 extras/Makefile.am: fix libwebpextras.la reference
 415f3ffe update ChangeLog (tag: v0.6.0-rc3)
 3c6d1224 update NEWS
 ee4a4141 update AUTHORS
 32ed856f Fix "all|no frames are keyframes" settings.
+1c3190b6 Merge "Fix "all|no frames are keyframes" settings."
 f4dc56fd disable GradientUnfilter_NEON
+4f3e3bbd disable GradientUnfilter_NEON
+2dc0bdca Fix "all|no frames are keyframes" settings.
 0d8e0588 img2webp: treat -loop as a no-op w/single images
 b0450139 ReadImage(): restore size reporting
 0ad3b4ef update ChangeLog (tag: v0.6.0-rc2)

Makefile.vc

@@ -29,7 +29,7 @@ PLATFORM_LDFLAGS = /SAFESEH
 NOLOGO     = /nologo
 CCNODBG    = cl.exe $(NOLOGO) /O2 /DNDEBUG
 CCDEBUG    = cl.exe $(NOLOGO) /Od /Gm /Zi /D_DEBUG /RTC1
-CFLAGS     = /Isrc $(NOLOGO) /W3 /EHsc /c
+CFLAGS     = /I. /Isrc $(NOLOGO) /W3 /EHsc /c
 CFLAGS     = $(CFLAGS) /DWIN32 /D_CRT_SECURE_NO_WARNINGS /DWIN32_LEAN_AND_MEAN
 LDFLAGS    = /LARGEADDRESSAWARE /MANIFEST /NXCOMPAT /DYNAMICBASE
 LDFLAGS    = $(LDFLAGS) $(PLATFORM_LDFLAGS)
@@ -155,6 +155,7 @@ CFGSET = TRUE
 !MESSAGE - all                            - build (de)mux-based targets for CFG
 !MESSAGE - gif2webp                       - requires libgif & >= VS2013
 !MESSAGE - anim_diff                      - requires libgif & >= VS2013
+!MESSAGE - anim_dump
 !MESSAGE
 !MESSAGE RTLIBCFG controls the runtime library linkage - 'static' or 'dynamic'.
 !MESSAGE   'legacy' will produce a Windows 2000 compatible library.
@@ -226,16 +227,15 @@ DSP_DEC_OBJS = \
     $(DIROBJ)\dsp\upsampling_msa.obj \
     $(DIROBJ)\dsp\upsampling_neon.obj \
     $(DIROBJ)\dsp\upsampling_sse2.obj \
+    $(DIROBJ)\dsp\upsampling_sse41.obj \
     $(DIROBJ)\dsp\yuv.obj \
     $(DIROBJ)\dsp\yuv_mips32.obj \
     $(DIROBJ)\dsp\yuv_mips_dsp_r2.obj \
     $(DIROBJ)\dsp\yuv_neon.obj \
     $(DIROBJ)\dsp\yuv_sse2.obj \
+    $(DIROBJ)\dsp\yuv_sse41.obj \
 
 DSP_ENC_OBJS = \
-    $(DIROBJ)\dsp\argb.obj \
-    $(DIROBJ)\dsp\argb_mips_dsp_r2.obj \
-    $(DIROBJ)\dsp\argb_sse2.obj \
     $(DIROBJ)\dsp\cost.obj \
     $(DIROBJ)\dsp\cost_mips32.obj \
     $(DIROBJ)\dsp\cost_mips_dsp_r2.obj \
@@ -287,7 +287,6 @@ ENC_OBJS = \
     $(DIROBJ)\enc\backward_references_enc.obj \
     $(DIROBJ)\enc\config_enc.obj \
     $(DIROBJ)\enc\cost_enc.obj \
-    $(DIROBJ)\enc\delta_palettization_enc.obj \
     $(DIROBJ)\enc\filter_enc.obj \
     $(DIROBJ)\enc\frame_enc.obj \
     $(DIROBJ)\enc\histogram_enc.obj \
@@ -358,15 +357,22 @@ all: ex $(EXTRA_EXAMPLES)
 # C99 support which is only available from VS2013 onward.
 gif2webp: $(DIRBIN)\gif2webp.exe
 anim_diff: $(DIRBIN)\anim_diff.exe
+anim_dump: $(DIRBIN)\anim_dump.exe
 
 $(DIRBIN)\anim_diff.exe: $(DIROBJ)\examples\anim_diff.obj $(EX_ANIM_UTIL_OBJS)
 $(DIRBIN)\anim_diff.exe: $(EX_UTIL_OBJS) $(IMAGEIO_UTIL_OBJS)
 $(DIRBIN)\anim_diff.exe: $(EX_GIF_DEC_OBJS) $(LIBWEBPDEMUX) $(LIBWEBP)
+$(DIRBIN)\anim_dump.exe: $(DIROBJ)\examples\anim_dump.obj $(EX_ANIM_UTIL_OBJS)
+$(DIRBIN)\anim_dump.exe: $(EX_UTIL_OBJS) $(IMAGEIO_UTIL_OBJS)
+$(DIRBIN)\anim_dump.exe: $(EX_GIF_DEC_OBJS) $(LIBWEBPDEMUX) $(LIBWEBP)
+$(DIRBIN)\anim_dump.exe: $(IMAGEIO_ENC_OBJS)
 $(DIRBIN)\cwebp.exe: $(DIROBJ)\examples\cwebp.obj $(IMAGEIO_DEC_OBJS)
 $(DIRBIN)\cwebp.exe: $(IMAGEIO_UTIL_OBJS)
+$(DIRBIN)\cwebp.exe: $(LIBWEBPDEMUX)
 $(DIRBIN)\dwebp.exe: $(DIROBJ)\examples\dwebp.obj $(IMAGEIO_DEC_OBJS)
 $(DIRBIN)\dwebp.exe: $(IMAGEIO_ENC_OBJS)
 $(DIRBIN)\dwebp.exe: $(IMAGEIO_UTIL_OBJS)
+$(DIRBIN)\dwebp.exe: $(LIBWEBPDEMUX)
 $(DIRBIN)\gif2webp.exe: $(DIROBJ)\examples\gif2webp.obj $(EX_GIF_DEC_OBJS)
 $(DIRBIN)\gif2webp.exe: $(EX_UTIL_OBJS) $(IMAGEIO_UTIL_OBJS) $(LIBWEBPMUX)
 $(DIRBIN)\gif2webp.exe: $(LIBWEBP)
@@ -379,26 +385,24 @@ $(DIRBIN)\webpmux.exe: $(DIROBJ)\examples\webpmux.obj $(LIBWEBPMUX)
 $(DIRBIN)\webpmux.exe: $(EX_UTIL_OBJS) $(IMAGEIO_UTIL_OBJS) $(LIBWEBP)
 $(DIRBIN)\img2webp.exe: $(DIROBJ)\examples\img2webp.obj $(LIBWEBPMUX)
 $(DIRBIN)\img2webp.exe: $(IMAGEIO_DEC_OBJS)
-$(DIRBIN)\img2webp.exe: $(EX_UTIL_OBJS) $(IMAGEIO_UTIL_OBJS) $(LIBWEBP)
+$(DIRBIN)\img2webp.exe: $(EX_UTIL_OBJS) $(IMAGEIO_UTIL_OBJS)
+$(DIRBIN)\img2webp.exe: $(LIBWEBPDEMUX) $(LIBWEBP)
 $(DIRBIN)\get_disto.exe: $(DIROBJ)\extras\get_disto.obj
-$(DIRBIN)\get_disto.exe: $(IMAGEIO_DEC_OBJS) $(IMAGEIO_UTIL_OBJS) $(LIBWEBP)
+$(DIRBIN)\get_disto.exe: $(IMAGEIO_DEC_OBJS) $(IMAGEIO_UTIL_OBJS)
+$(DIRBIN)\get_disto.exe: $(LIBWEBPDEMUX) $(LIBWEBP)
 $(DIRBIN)\webp_quality.exe: $(DIROBJ)\extras\webp_quality.obj
 $(DIRBIN)\webp_quality.exe: $(IMAGEIO_UTIL_OBJS)
 $(DIRBIN)\webp_quality.exe: $(EXTRAS_OBJS) $(LIBWEBP)
 $(DIRBIN)\webpinfo.exe: $(DIROBJ)\examples\webpinfo.obj
 $(DIRBIN)\webpinfo.exe: $(IMAGEIO_DEC_OBJS)
-$(DIRBIN)\webpinfo.exe: $(EX_UTIL_OBJS) $(IMAGEIO_UTIL_OBJS) $(LIBWEBP)
+$(DIRBIN)\webpinfo.exe: $(EX_UTIL_OBJS) $(IMAGEIO_UTIL_OBJS)
+$(DIRBIN)\webpinfo.exe: $(LIBWEBPDEMUX) $(LIBWEBP)
 
 $(OUT_EXAMPLES): $(EX_UTIL_OBJS) $(LIBWEBP)
 $(EX_UTIL_OBJS) $(IMAGEIO_UTIL_OBJS): $(OUTPUT_DIRS)
 $(IMAGEIO_DEC_OBJS) $(IMAGEIO_ENC_OBJS) $(EXTRAS_OBJS): $(OUTPUT_DIRS)
 !ENDIF  # ARCH == ARM
 
-experimental:
-	$(MAKE) /f Makefile.vc \
-	    CFG=$(CFG) \
-	    CFLAGS="$(CFLAGS) /DWEBP_EXPERIMENTAL_FEATURES" /$(MAKEFLAGS)
-
 $(LIBWEBPDECODER): $(LIBWEBPDECODER_OBJS)
 $(LIBWEBP): $(LIBWEBP_OBJS)
 $(LIBWEBPMUX): $(LIBWEBPMUX_OBJS)
@@ -444,7 +448,7 @@ $(OUTPUT_DIRS):
 $(DIROBJ)\$(DLLINC):
 	@echo #ifndef WEBP_DLL_H_ > $@
 	@echo #define WEBP_DLL_H_ >> $@
-	@echo #define WEBP_EXTERN(type) __declspec(dllexport) type >> $@
+	@echo #define WEBP_EXTERN __declspec(dllexport) >> $@
 	@echo #endif  /* WEBP_DLL_H_ */ >> $@
 
 .SUFFIXES: .c .obj .res .exe
@@ -456,6 +460,9 @@ $(DIROBJ)\dsp\enc_avx2.obj: src\dsp\enc_avx2.c
 $(DIROBJ)\examples\anim_diff.obj: examples\anim_diff.c
 	$(CC) $(CFLAGS) /DWEBP_HAVE_GIF /Fd$(LIBWEBP_PDBNAME) \
 	  /Fo$(DIROBJ)\examples\ examples\$(@B).c
+$(DIROBJ)\examples\anim_dump.obj: examples\anim_dump.c
+	$(CC) $(CFLAGS) /DWEBP_HAVE_GIF /Fd$(LIBWEBP_PDBNAME) \
+	  /Fo$(DIROBJ)\examples\ examples\$(@B).c
 $(DIROBJ)\examples\anim_util.obj: examples\anim_util.c
 	$(CC) $(CFLAGS) /DWEBP_HAVE_GIF /Fd$(LIBWEBP_PDBNAME) \
 	  /Fo$(DIROBJ)\examples\ examples\$(@B).c

NEWS

@@ -1,3 +1,16 @@
+- 11/24/2017: version 0.6.1
+  This is a binary compatible release.
+  * lossless performance and compression improvements + a new 'cruncher' mode
+    (-m 6 -q 100)
+  * ARM performance improvements with clang (15-20% w/ndk r15c, issue #339)
+  * webp-js: emscripten/webassembly based javascript decoder
+  * miscellaneous bug & build fixes (issue #329, #332, #343, #353, #360, #361,
+    #363)
+  Tool updates / additions:
+    added webpinfo - prints file format information (issue #330)
+    gif2webp - loop behavior modified to match Chrome M63+ (crbug.com/649264);
+               '-loop_compatibility' can be used for the old behavior
+
 - 1/26/2017: version 0.6.0
   * lossless performance and compression improvements
   * miscellaneous performance improvements (SSE2, NEON, MSA)

README

@@ -4,7 +4,7 @@
           \__\__/\____/\_____/__/ ____  ___
                 / _/ /    \    \ /  _ \/ _/
                /  \_/   / /   \ \   __/  \__
-               \____/____/\_____/_____/____/v0.6.0
+               \____/____/\_____/_____/____/v0.6.1
 
 Description:
 ============
@@ -113,8 +113,8 @@ make install
 
 CMake:
 ------
-With CMake, you can compile libwebp, cwebp, dwebp, gif2web, img2webp and the
-JS bindings.
+With CMake, you can compile libwebp, cwebp, dwebp, gif2web, img2webp, webpinfo
+and the JS bindings.
 
 Prerequisites:
 A compiler (e.g., gcc with autotools) and CMake.
@@ -367,6 +367,23 @@ Use following options to convert into alternate image formats:
   -quiet ....... quiet mode, don't print anything
   -noasm ....... disable all assembly optimizations
 
+WebP file analysis tool:
+========================
+
+'webpinfo' can be used to print out the chunk level structure and bitstream
+header information of WebP files. It can also check if the files are of valid
+WebP format.
+
+Usage: webpinfo [options] in_files
+Note: there could be multiple input files;
+      options must come before input files.
+Options:
+  -version ........... Print version number and exit.
+  -quiet ............. Do not show chunk parsing information.
+  -diag .............. Show parsing error diagnosis.
+  -summary ........... Show chunk stats summary.
+  -bitstream_info .... Parse bitstream header.
+
 Visualization tool:
 ===================
 
@@ -477,6 +494,8 @@ Options:
   -metadata <string> ..... comma separated list of metadata to
                            copy from the input to the output if present
                            Valid values: all, none, icc, xmp (default)
+  -loop_compatibility .... use compatibility mode for Chrome
+                           version prior to M62 (inclusive)
   -mt .................... use multi-threading if available
 
   -version ............... print version number and exit

README.mux

@@ -1,7 +1,7 @@
           __   __  ____  ____  ____  __ __  _     __ __
          /  \\/  \/  _ \/  _ \/  _ \/  \  \/ \___/_ / _\
          \       /   __/  _  \   __/      /  /  (_/  /__
-          \__\__/\_____/_____/__/  \__//_/\_____/__/___/v0.4.0
+          \__\__/\_____/_____/__/  \__//_/\_____/__/___/v0.4.1
 
 
 Description:
@@ -33,6 +33,7 @@ Usage: webpmux -get GET_OPTIONS INPUT -o OUTPUT
        webpmux -info INPUT
        webpmux [-h|-help]
        webpmux -version
+       webpmux argument_file_name
 
 GET_OPTIONS:
  Extract relevant data:
@@ -92,6 +93,9 @@ INPUT & OUTPUT are in WebP format.
 Note: The nature of EXIF, XMP and ICC data is not checked and is assumed to be
 valid.
 
+Note: if a single file name is passed as the argument, the arguments will be
+tokenized from this file. The file name must not start with the character '-'.
+
 Visualization tool:
 ===================
 

README.wasm

@@ -1,91 +0,0 @@
-Description:
-============
-
-This file describes the compilation of libwebp using portable intrinsics /
-WebAssembly (wasm) to native targets using clang and CMake.
-
-Prerequisites:
-==============
-
-- cmake 2.8+
-
-- clang 3.9+ for portable intrinsics support; as wasm progresses a tip of tree
-  build may be necessary.
-
-Building:
-=========
-
- - configure the project with CMake using:
-
- $ mkdir -p build && \
-   cd build && \
-   cmake -DWEBP_BUILD_DWEBP=1 -DCMAKE_C_COMPILER=clang -DWEBP_ENABLE_WASM=1 ../
-
- - compile dwebp using 'make'.
-
- - Note this currently generates native executables only and is incompatible
-   with -DWEBP_BUILD_WEBP_JS.
-
-Build options:
-==============
-
-- platform specific multiply high (mulhi) implementation, disabled by default.
-  arm: -DCMAKE_C_FLAGS='-DENABLE_NEON_BUILTIN_MULHI_INT16X8 ...'
-  x86: -DCMAKE_C_FLAGS='-DENABLE_X86_BUILTIN_MULHI_INT16X8 ...'
-
-Cross compilation:
-==================
-
- - arm toolchains can be obtained from:
-   http://www.linaro.org/downloads/
-
- - the android ndk can be obtained from:
-   https://developer.android.com/ndk/downloads/index.html
-
-armv7:
-------
-
-Android:
- $ ./android-ndk-r15b/build/tools/make_standalone_toolchain.py \
-   --arch arm --api 24 --stl gnustl --install-dir /opt/android-arm-24
- $ mkdir -p build && cd build
- $ cmake ../libwebp \
-   -DWEBP_BUILD_DWEBP=1 \
-   -DCMAKE_C_COMPILER=/opt/android-arm-24/bin/clang \
-   -DCMAKE_PREFIX_PATH=/opt/android-arm-24/sysroot/usr/lib \
-   -DCMAKE_C_FLAGS=-fPIE \
-   -DCMAKE_EXE_LINKER_FLAGS=-Wl,-pie \
-   -DCMAKE_BUILD_TYPE=Release \
-   -DWEBP_ENABLE_WASM=1
-
-Linux:
- $ gcc_arm=/opt/gcc-arm; target=arm-linux-gnueabihf
- $ mkdir -p build && cd build
- $ cmake ../libwebp -DWEBP_BUILD_DWEBP=1 -DWEBP_ENABLE_WASM=1 \
-   -DCMAKE_C_COMPILER=clang \
-   -DCMAKE_C_FLAGS="--target=$target --gcc-toolchain=$gcc_arm --sysroot=$gcc_arm/$target/libc -march=armv7-a -mfpu=neon" \
-   -DCMAKE_PREFIX_PATH=$gcc_arm/$target/libc/usr
-
-aarch64 / arm64:
-----------------
-
-Android:
- $ ./android-ndk-r15b/build/tools/make_standalone_toolchain.py \
-   --arch arm64 --api 24 --stl gnustl --install-dir /opt/android-arm64-24
- $ mkdir -p build && cd build
- $ cmake ../libwebp \
-   -DWEBP_BUILD_DWEBP=1 \
-   -DCMAKE_C_COMPILER=/opt/android-arm64-24/bin/clang \
-   -DCMAKE_PREFIX_PATH=/opt/android-arm64-24/sysroot/usr/lib \
-   -DCMAKE_C_FLAGS=-fPIE \
-   -DCMAKE_EXE_LINKER_FLAGS=-Wl,-pie \
-   -DCMAKE_BUILD_TYPE=Release \
-   -DWEBP_ENABLE_WASM=1
-
-Linux:
- $ gcc_arm=/opt/gcc-aarch64; target=aarch64-linux-gnu
- $ mkdir -p build && cd build
- $ cmake ../libwebp -DWEBP_BUILD_DWEBP=1 -DWEBP_ENABLE_WASM=1 \
-   -DCMAKE_C_COMPILER=clang \
-   -DCMAKE_C_FLAGS="--target=$target --gcc-toolchain=$gcc_arm --sysroot=$gcc_arm/$target/libc" \
-   -DCMAKE_PREFIX_PATH=$gcc_arm/$target/libc/usr

README.webp_js

@@ -31,13 +31,9 @@ using Emscripten and CMake.
  - that's it! Upon completion, you should have the webp.js and
    webp.js.mem files generated.
 
- - Note this generates both webp_js and webp_wasm without any SIMD enabled due
-   to bugs with this toolchain associated with the SSE2 code.
-   -DWEBP_ENABLE_WASM is currently meant to generate native (x86, arm)
-   executables (dwebp, cwebp) and is incompatible with -DWEBP_BUILD_WEBP_JS.
-
 The callable JavaScript function is WebPToSDL(), which decodes a raw WebP
-bitstream into a canvas. See webp_js/index.html for a simple usage sample.
+bitstream into a canvas. See webp_js/index.html for a simple usage sample
+(see below for instructions).
 
 Demo HTML page:
 ===============

build.gradle

@@ -82,12 +82,14 @@ model {
         }
       }
       // Check for NEON usage.
-      if (getTargetPlatform() == "arm" || getTargetPlatform() == "arm64") {
+      if (getTargetPlatform() == "arm") {
         NEON = "c.neon"
         cCompiler.define "HAVE_CPU_FEATURES_H"
       } else {
         NEON = "c"
       }
+
+      cCompiler.args "-I" + file(".").absolutePath
     }
     // Link to pthread for shared libraries.
     withType(SharedLibraryBinarySpec) {
@@ -120,9 +122,6 @@ model {
             include "alpha_processing_neon.$NEON"
             include "alpha_processing_sse2.c"
             include "alpha_processing_sse41.c"
-            include "argb.c"
-            include "argb_mips_dsp_r2.c"
-            include "argb_sse2.c"
             include "cpu.c"
             include "dec.c"
             include "dec_clip_tables.c"
@@ -153,11 +152,13 @@ model {
             include "upsampling_msa.c"
             include "upsampling_neon.$NEON"
             include "upsampling_sse2.c"
+            include "upsampling_sse41.c"
             include "yuv.c"
             include "yuv_mips32.c"
             include "yuv_mips_dsp_r2.c"
             include "yuv_neon.$NEON"
             include "yuv_sse2.c"
+            include "yuv_sse41.c"
             srcDir "src/utils"
             include "bit_reader_utils.c"
             include "color_cache_utils.c"
@@ -197,7 +198,6 @@ model {
             include "backward_references_enc.c"
             include "config_enc.c"
             include "cost_enc.c"
-            include "delta_palettization_enc.c"
             include "filter_enc.c"
             include "frame_enc.c"
             include "histogram_enc.c"
@@ -289,6 +289,7 @@ model {
     imagedec(NativeLibrarySpec) {
       binaries {
         all {
+          lib library: "webpdemux", linkage: "static"
           lib library: "webp", linkage: "static"
         }
       }
@@ -331,6 +332,7 @@ model {
           lib library: "example_util", linkage: "static"
           lib library: "imagedec", linkage: "static"
           lib library: "imageio_util", linkage: "static"
+          lib library: "webpdemux", linkage: "static"
           lib library: "webp", linkage: "static"
         }
       }
@@ -351,6 +353,7 @@ model {
           lib library: "imagedec", linkage: "static"
           lib library: "imageenc", linkage: "static"
           lib library: "imageio_util", linkage: "static"
+          lib library: "webpdemux", linkage: "static"
           lib library: "webp"
         }
       }
@@ -390,6 +393,7 @@ model {
           lib library: "imagedec", linkage: "static"
           lib library: "imageio_util", linkage: "static"
           lib library: "webpmux", linkage: "static"
+          lib library: "webpdemux", linkage: "static"
           lib library: "webp"
         }
       }

cmake/config.h.in

@@ -13,6 +13,9 @@
 /* Set to 1 if __builtin_bswap64 is available */
 #cmakedefine HAVE_BUILTIN_BSWAP64 1
 
+/* Define to 1 if you have the <cpu-features.h> header file. */
+#cmakedefine HAVE_CPU_FEATURES_H 1
+
 /* Define to 1 if you have the <dlfcn.h> header file. */
 #cmakedefine HAVE_DLFCN_H 1
 
@@ -100,9 +103,6 @@
 /* Version number of package */
 #cmakedefine VERSION "@VERSION@"
 
-/* Enable experimental code */
-#cmakedefine WEBP_EXPERIMENTAL_FEATURES 1
-
 /* Set to 1 if AVX2 is supported */
 #cmakedefine WEBP_HAVE_AVX2 1
 
@@ -115,9 +115,19 @@
 /* Set to 1 if JPEG library is installed */
 #cmakedefine WEBP_HAVE_JPEG 1
 
+/* Set to 1 if NEON is supported */
+#cmakedefine WEBP_HAVE_NEON
+
+/* Set to 1 if runtime detection of NEON is enabled */
+/* TODO: handle properly in CMake */
+#cmakedefine WEBP_HAVE_NEON_RTCD
+
 /* Set to 1 if PNG library is installed */
 #cmakedefine WEBP_HAVE_PNG 1
 
+/* Set to 1 if SDL library is installed */
+#cmakedefine WEBP_HAVE_SDL 1
+
 /* Set to 1 if SSE2 is supported */
 #cmakedefine WEBP_HAVE_SSE2 1
 
@@ -127,6 +137,9 @@
 /* Set to 1 if TIFF library is installed */
 #cmakedefine WEBP_HAVE_TIFF 1
 
+/* Enable near lossless encoding */
+#cmakedefine WEBP_NEAR_LOSSLESS 1
+
 /* Undefine this to disable thread support. */
 #cmakedefine WEBP_USE_THREAD 1
 

cmake/cpu.cmake

@@ -1,4 +1,5 @@
 ## Check for SIMD extensions.
+include(CMakePushCheckState)
 
 function(webp_check_compiler_flag WEBP_SIMD_FLAG ENABLE_SIMD)
   if(NOT ENABLE_SIMD)
@@ -7,6 +8,8 @@ function(webp_check_compiler_flag WEBP_SIMD_FLAG ENABLE_SIMD)
     return()
   endif()
   unset(WEBP_HAVE_FLAG_${WEBP_SIMD_FLAG} CACHE)
+  cmake_push_check_state()
+  set(CMAKE_REQUIRED_INCLUDES ${CMAKE_CURRENT_SOURCE_DIR})
   check_c_source_compiles("
       #include \"${CMAKE_CURRENT_LIST_DIR}/../src/dsp/dsp.h\"
       int main(void) {
@@ -17,6 +20,7 @@ function(webp_check_compiler_flag WEBP_SIMD_FLAG ENABLE_SIMD)
       }
     " WEBP_HAVE_FLAG_${WEBP_SIMD_FLAG}
   )
+  cmake_pop_check_state()
   if(WEBP_HAVE_FLAG_${WEBP_SIMD_FLAG})
     set(WEBP_HAVE_${WEBP_SIMD_FLAG} 1 PARENT_SCOPE)
   else()
@@ -60,6 +64,7 @@ foreach(I_SIMD RANGE ${WEBP_SIMD_FLAGS_RANGE})
   # First try with no extra flag added as the compiler might have default flags
   # (especially on Android).
   unset(WEBP_HAVE_${WEBP_SIMD_FLAG} CACHE)
+  cmake_push_check_state()
   set(CMAKE_REQUIRED_FLAGS)
   webp_check_compiler_flag(${WEBP_SIMD_FLAG} ${WEBP_ENABLE_SIMD})
   if(NOT WEBP_HAVE_${WEBP_SIMD_FLAG})
@@ -85,11 +90,8 @@ foreach(I_SIMD RANGE ${WEBP_SIMD_FLAGS_RANGE})
     foreach(FILE ${SIMD_FILES})
       list(APPEND WEBP_SIMD_FILES_NOT_TO_INCLUDE ${FILE})
     endforeach()
-    # Explicitly disable SIMD. Avoid this with WASM to avoid an ICE with clang:
-    # https://bugs.chromium.org/p/webp/issues/detail?id=350
-    # WASM overrides the native SIMD so building it in is harmless aside from
-    # binary size.
-    if(NOT WEBP_ENABLE_WASM AND SIMD_DISABLE_FLAGS)
+    # Explicitly disable SIMD.
+    if(SIMD_DISABLE_FLAGS)
       list(GET SIMD_DISABLE_FLAGS ${I_SIMD} SIMD_COMPILE_FLAG)
       include(CheckCCompilerFlag)
       if(SIMD_COMPILE_FLAG)
@@ -104,11 +106,12 @@ foreach(I_SIMD RANGE ${WEBP_SIMD_FLAGS_RANGE})
             set(COMMON_PATTERNS)
           endif()
           set(CMAKE_REQUIRED_DEFINITIONS ${SIMD_COMPILE_FLAG})
-          check_c_source_compiles("int main(void) {return 0;}" FLAG2
+          check_c_source_compiles("int main(void) {return 0;}"
+            FLAG_${SIMD_COMPILE_FLAG}
             FAIL_REGEX "warning: argument unused during compilation:"
             ${COMMON_PATTERNS}
           )
-          if(NOT FLAG2)
+          if(NOT FLAG_${SIMD_COMPILE_FLAG})
             unset(HAS_COMPILE_FLAG CACHE)
           endif()
         endif()
@@ -118,14 +121,5 @@ foreach(I_SIMD RANGE ${WEBP_SIMD_FLAGS_RANGE})
       endif()
     endif()
   endif()
+  cmake_pop_check_state()
 endforeach()
-
-## Add *_wasm.c files if enabled.
-if(WEBP_ENABLE_WASM)
-  file(GLOB SIMD_FILES "${CMAKE_CURRENT_LIST_DIR}/../"
-    "src/dsp/*_wasm.c"
-  )
-  foreach(FILE ${SIMD_FILES})
-    list(APPEND WEBP_SIMD_FILES_TO_INCLUDE ${FILE})
-  endforeach()
-endif()

cmake/deps.cmake

@@ -70,18 +70,43 @@ foreach(I_LIB PNG JPEG TIFF)
   set(WEBP_HAVE_${I_LIB} ${${I_LIB}_FOUND})
   if(${I_LIB}_FOUND)
     list(APPEND WEBP_DEP_IMG_LIBRARIES ${${I_LIB}_LIBRARIES})
-    list(APPEND WEBP_DEP_IMG_INCLUDE_DIRS ${${I_LIB}_INCLUDE_DIRS})
+    list(APPEND WEBP_DEP_IMG_INCLUDE_DIRS
+         ${${I_LIB}_INCLUDE_DIR} ${${I_LIB}_INCLUDE_DIRS})
   endif()
 endforeach()
+if(WEBP_DEP_IMG_INCLUDE_DIRS)
+  list(REMOVE_DUPLICATES WEBP_DEP_IMG_INCLUDE_DIRS)
+endif()
 
 # GIF detection, gifdec isn't part of the imageio lib.
+include(CMakePushCheckState)
 set(WEBP_DEP_GIF_LIBRARIES)
 set(WEBP_DEP_GIF_INCLUDE_DIRS)
 find_package(GIF)
 set(WEBP_HAVE_GIF ${GIF_FOUND})
 if(GIF_FOUND)
-  list(APPEND WEBP_DEP_GIF_LIBRARIES ${GIF_LIBRARIES})
-  list(APPEND WEBP_DEP_GIF_INCLUDE_DIRS ${GIF_INCLUDE_DIR})
+  # GIF find_package only locates the header and library, it doesn't fail
+  # compile tests when detecting the version, but falls back to 3 (as of at
+  # least cmake 3.7.2). Make sure the library links to avoid incorrect
+  # detection when cross compiling.
+  cmake_push_check_state()
+  set(CMAKE_REQUIRED_LIBRARIES ${GIF_LIBRARIES})
+  set(CMAKE_REQUIRED_INCLUDES ${GIF_INCLUDE_DIR})
+  check_c_source_compiles("
+      #include <gif_lib.h>
+      int main(void) {
+        (void)DGifOpenFileHandle;
+        return 0;
+      }
+      " GIF_COMPILES
+  )
+  cmake_pop_check_state()
+  if(GIF_COMPILES)
+    list(APPEND WEBP_DEP_GIF_LIBRARIES ${GIF_LIBRARIES})
+    list(APPEND WEBP_DEP_GIF_INCLUDE_DIRS ${GIF_INCLUDE_DIR})
+  else()
+    unset(GIF_FOUND)
+  endif()
 endif()
 
 ## Check for specific headers.
@@ -139,13 +164,3 @@ strip_bracket(PACKAGE_URL)
 set(PACKAGE_STRING "${PACKAGE_NAME} ${PACKAGE_VERSION}")
 set(PACKAGE_TARNAME ${PACKAGE_NAME})
 set(VERSION ${PACKAGE_VERSION})
-
-## Generate the config.h header.
-configure_file(${CMAKE_CURRENT_LIST_DIR}/config.h.in
-  ${CMAKE_CURRENT_BINARY_DIR}/include/webp/config.h)
-add_definitions(-DHAVE_CONFIG_H)
-# The webp folder is included as we reference config.h as
-# ../webp/config.h or webp/config.h
-include_directories(${CMAKE_CURRENT_BINARY_DIR}/include
-  ${CMAKE_CURRENT_BINARY_DIR}/include/webp
-)

configure.ac

@@ -1,4 +1,4 @@
-AC_INIT([libwebp], [0.6.0],
+AC_INIT([libwebp], [0.6.1],
         [https://bugs.chromium.org/p/webp],,
         [http://developers.google.com/speed/webp])
 AC_CANONICAL_HOST
@@ -79,6 +79,7 @@ TEST_AND_ADD_CFLAGS([AM_CFLAGS], [-Wold-style-definition])
 TEST_AND_ADD_CFLAGS([AM_CFLAGS], [-Wparentheses-equality])
 TEST_AND_ADD_CFLAGS([AM_CFLAGS], [-Wshadow])
 TEST_AND_ADD_CFLAGS([AM_CFLAGS], [-Wshorten-64-to-32])
+TEST_AND_ADD_CFLAGS([AM_CFLAGS], [-Wundef])
 TEST_AND_ADD_CFLAGS([AM_CFLAGS], [-Wunreachable-code])
 TEST_AND_ADD_CFLAGS([AM_CFLAGS], [-Wunused-but-set-variable])
 TEST_AND_ADD_CFLAGS([AM_CFLAGS], [-Wunused])
@@ -346,6 +347,8 @@ AS_IF([test "x$enable_gl" != "xno"], [
       # override with --with-gl*
       glut_cflags="$glut_cflags|-framework GLUT -framework OpenGL"
       glut_ldflags="$glut_ldflags|-framework GLUT -framework OpenGL"
+      # quiet deprecation warnings for glut
+      TEST_AND_ADD_CFLAGS([AM_CFLAGS], [-Wno-deprecated-declarations])
       ;;
   esac
 
@@ -442,31 +445,54 @@ AC_ARG_ENABLE([sdl],
                               @<:@default=auto@:>@]))
 AS_IF([test "x$enable_sdl" != "xno"], [
   CLEAR_LIBVARS([SDL])
+  AC_PATH_PROGS([LIBSDL_CONFIG], [sdl-config])
+  if test -n "$LIBSDL_CONFIG"; then
+    SDL_INCLUDES=`$LIBSDL_CONFIG --cflags`
+    SDL_LIBS="`$LIBSDL_CONFIG --libs`"
+  fi
+
   WITHLIB_OPTION([sdl], [SDL])
 
-  $sdl_header = "no";
+  sdl_header="no"
   LIBCHECK_PROLOGUE([SDL])
-  AC_CHECK_HEADER([SDL/SDL.h], [sdl_header="SDL_SDL.h"],
+  AC_CHECK_HEADER([SDL/SDL.h], [sdl_header="SDL/SDL.h"],
                   [AC_CHECK_HEADER([SDL.h], [sdl_header="SDL.h"],
                   [AC_MSG_WARN(SDL library not available - no sdl.h)])])
-  if test x"$sdl_header" != "xno" ; then
-    AC_CHECK_LIB(SDL, SDL_Init,
-                 [SDL_LIBS="-lSDL"
-                  SDL_INCLUDES="-DWEBP_HAVE_SDL"
-                  AC_DEFINE(WEBP_HAVE_SDL, [1],
-                            [Set to 1 if SDL library is installed])
-                  sdl_support=yes
-                 ],
-                 AC_MSG_WARN(Optional SDL library not found),
-                 [$MATH_LIBS]),
-    if test x"$sdl_header" == "xSDL.h" ; then
+  if test x"$sdl_header" != "xno"; then
+    AC_LANG_PUSH(C)
+    SDL_SAVED_LIBS="$LIBS"
+    for lib in "" "-lSDL" "-lSDLmain -lSDL"; do
+      LIBS="$SDL_SAVED_LIBS $lib"
+      # Perform a full link to ensure SDL_main is resolved if needed.
+      AC_LINK_IFELSE(
+        [AC_LANG_SOURCE([
+           #include <$sdl_header>
+           int main(int argc, char** argv) {
+             SDL_Init(0);
+             return 0;
+           }])],
+        [SDL_LIBS="$LDFLAGS $LIBS"
+         SDL_INCLUDES="$SDL_INCLUDES -DWEBP_HAVE_SDL"
+         AC_DEFINE(WEBP_HAVE_SDL, [1],
+                   [Set to 1 if SDL library is installed])
+         sdl_support=yes]
+      )
+      if test x"$sdl_support" = "xyes"; then
+        break
+      fi
+    done
+    # LIBS is restored by LIBCHECK_EPILOGUE
+    AC_LANG_POP
+    if test x"$sdl_header" = "xSDL.h"; then
       SDL_INCLUDES="$SDL_INCLUDES -DWEBP_HAVE_JUST_SDL_H"
     fi
   fi
   LIBCHECK_EPILOGUE([SDL])
 
-  if test "$sdl_support" = "yes" ; then
+  if test x"$sdl_support" = "xyes"; then
     build_vwebp_sdl=yes
+  else
+    AC_MSG_WARN(Optional SDL library not found)
   fi
 ])
 
@@ -589,7 +615,7 @@ AS_IF([test "x$enable_gif" != "xno"], [
 
   if test "$gif_support" = "yes" -a \
           "$enable_libwebpdemux" = "yes"; then
-    build_animdiff=yes
+    build_anim_diff=yes
   fi
 
   if test "$gif_support" = "yes" -a \
@@ -597,10 +623,10 @@ AS_IF([test "x$enable_gif" != "xno"], [
     build_gif2webp=yes
   fi
 ])
-AM_CONDITIONAL([BUILD_ANIMDIFF], [test "${build_animdiff}" = "yes"])
+AM_CONDITIONAL([BUILD_ANIMDIFF], [test "${build_anim_diff}" = "yes"])
 AM_CONDITIONAL([BUILD_GIF2WEBP], [test "${build_gif2webp}" = "yes"])
 
-if test "$enable_libwebpmux" = "yes"; then
+if test "$enable_libwebpdemux" = "yes" -a "$enable_libwebpmux" = "yes"; then
   build_img2webp=yes
 fi
 AM_CONDITIONAL([BUILD_IMG2WEBP], [test "${build_img2webp}" = "yes"])
@@ -662,7 +688,7 @@ if test "$enable_wic" = "yes"; then
 fi
 esac
 
-dnl === If --enable-swap-16bit-csp is defined, add -DWEBP_SWAP_16BIT_CSP
+dnl === If --enable-swap-16bit-csp is defined, add -DWEBP_SWAP_16BIT_CSP=1
 
 USE_SWAP_16BIT_CSP=""
 AC_MSG_CHECKING(if --enable-swap-16bit-csp option is specified)
@@ -670,23 +696,25 @@ AC_ARG_ENABLE([swap-16bit-csp],
               AS_HELP_STRING([--enable-swap-16bit-csp],
                              [Enable byte swap for 16 bit colorspaces]))
 if test "$enable_swap_16bit_csp" = "yes"; then
-  USE_SWAP_16BIT_CSP="-DWEBP_SWAP_16BIT_CSP"
+  USE_SWAP_16BIT_CSP="-DWEBP_SWAP_16BIT_CSP=1"
 fi
 AC_MSG_RESULT(${enable_swap_16bit_csp-no})
 AC_SUBST(USE_SWAP_16BIT_CSP)
 
-dnl === If --enable-experimental is defined, add -DWEBP_EXPERIMENTAL_FEATURES
+dnl === If --disable-near-lossless is defined, add -DWEBP_NEAR_LOSSLESS=0
 
-USE_EXPERIMENTAL_CODE=""
-AC_MSG_CHECKING(if --enable-experimental option is specified)
-AC_ARG_ENABLE([experimental], AS_HELP_STRING([--enable-experimental],
-                                             [Activate experimental features]))
-if test "$enable_experimental" = "yes"; then
-  AC_DEFINE(WEBP_EXPERIMENTAL_FEATURES, [1], [Enable experimental code])
-  USE_EXPERIMENTAL_CODE="-DWEBP_EXPERIMENTAL_FEATURES"
+AC_DEFINE(WEBP_NEAR_LOSSLESS, [1], [Enable near lossless encoding])
+AC_MSG_CHECKING(if --disable-near-lossless option is specified)
+AC_ARG_ENABLE([near_lossless],
+              AS_HELP_STRING([--disable-near-lossless],
+                             [Disable near lossless encoding]),
+              [], [enable_near_lossless=yes])
+if test "$enable_near_lossless" = "no"; then
+  AC_DEFINE(WEBP_NEAR_LOSSLESS, [0], [Enable near lossless encoding])
+  AC_MSG_RESULT([yes])
+else
+  AC_MSG_RESULT([no])
 fi
-AC_MSG_RESULT(${enable_experimental-no})
-AC_SUBST(USE_EXPERIMENTAL_CODE)
 
 dnl === Check whether libwebpmux should be built
 AC_MSG_CHECKING(whether libwebpmux is to be built)
@@ -699,8 +727,9 @@ AM_CONDITIONAL([WANT_MUX], [test "$enable_libwebpmux" = "yes"])
 dnl === Check whether libwebpdemux should be built
 AC_MSG_CHECKING(whether libwebpdemux is to be built)
 AC_ARG_ENABLE([libwebpdemux],
-              AS_HELP_STRING([--enable-libwebpdemux],
-                             [Build libwebpdemux @<:@default=no@:>@]))
+              AS_HELP_STRING([--disable-libwebpdemux],
+                             [Disable libwebpdemux @<:@default=no@:>@]),
+              [], [enable_libwebpdemux=yes])
 AC_MSG_RESULT(${enable_libwebpdemux-no})
 AM_CONDITIONAL([WANT_DEMUX], [test "$enable_libwebpdemux" = "yes"])
 
@@ -749,20 +778,20 @@ libwebpmux: ${enable_libwebpmux-no}
 libwebpextras: ${enable_libwebpextras-no}
 
 Tools:
-cwebp : yes
+cwebp : ${enable_libwebpdemux-no}
   Input format support
   ====================
   JPEG : ${jpeg_support-no}
   PNG  : ${png_support-no}
   TIFF : ${tiff_support-no}
   WIC  : ${wic_support-no}
-dwebp : yes
+dwebp : ${enable_libwebpdemux-no}
   Output format support
   =====================
   PNG  : ${png_support-no}
   WIC  : ${wic_support-no}
 GIF support : ${gif_support-no}
-anim_diff   : ${build_animdiff-no}
+anim_diff   : ${build_anim_diff-no}
 gif2webp    : ${build_gif2webp-no}
 img2webp    : ${build_img2webp-no}
 webpmux     : ${enable_libwebpmux-no}

examples/Android.mk

@@ -27,7 +27,7 @@ LOCAL_SRC_FILES := \
 
 LOCAL_CFLAGS := $(WEBP_CFLAGS)
 LOCAL_C_INCLUDES := $(LOCAL_PATH)/../src
-LOCAL_STATIC_LIBRARIES := example_util imageio_util imagedec webp
+LOCAL_STATIC_LIBRARIES := example_util imageio_util imagedec webpdemux webp
 
 LOCAL_MODULE := cwebp
 
@@ -43,8 +43,7 @@ LOCAL_SRC_FILES := \
 
 LOCAL_CFLAGS := $(WEBP_CFLAGS)
 LOCAL_C_INCLUDES := $(LOCAL_PATH)/../src
-LOCAL_STATIC_LIBRARIES := example_util imagedec imageenc webp
-
+LOCAL_STATIC_LIBRARIES := example_util imagedec imageenc webpdemux webp
 LOCAL_MODULE := dwebp
 
 include $(BUILD_EXECUTABLE)
@@ -75,7 +74,8 @@ LOCAL_SRC_FILES := \
 
 LOCAL_CFLAGS := $(WEBP_CFLAGS)
 LOCAL_C_INCLUDES := $(LOCAL_PATH)/../src
-LOCAL_STATIC_LIBRARIES := example_util imageio_util imagedec webpmux webp
+LOCAL_STATIC_LIBRARIES := example_util imageio_util imagedec webpmux webpdemux \
+                          webp
 
 LOCAL_MODULE := img2webp_example
 

examples/Makefile.am

@@ -1,8 +1,11 @@
 AM_CPPFLAGS += -I$(top_builddir)/src -I$(top_srcdir)/src
 
-bin_PROGRAMS = dwebp cwebp
+bin_PROGRAMS =
+if WANT_DEMUX
+  bin_PROGRAMS += dwebp cwebp
+endif
 if BUILD_ANIMDIFF
-  noinst_PROGRAMS = anim_diff
+  noinst_PROGRAMS = anim_diff anim_dump
 endif
 if BUILD_GIF2WEBP
   bin_PROGRAMS += gif2webp
@@ -26,21 +29,37 @@ libexample_util_la_SOURCES = example_util.c example_util.h
 libexample_util_la_LIBADD = ../src/libwebp.la
 
 anim_diff_SOURCES = anim_diff.c anim_util.c anim_util.h
-anim_diff_CPPFLAGS = $(AM_CPPFLAGS) $(USE_EXPERIMENTAL_CODE) $(GIF_INCLUDES)
-anim_diff_LDADD  = ../src/demux/libwebpdemux.la
-anim_diff_LDADD += libexample_util.la ../imageio/libimageio_util.la
+anim_diff_CPPFLAGS = $(AM_CPPFLAGS) $(GIF_INCLUDES)
+anim_diff_LDADD  =
+anim_diff_LDADD += ../src/demux/libwebpdemux.la
+anim_diff_LDADD += libexample_util.la
+anim_diff_LDADD += ../imageio/libimageio_util.la
 anim_diff_LDADD += $(GIF_LIBS) -lm
 
+anim_dump_SOURCES = anim_dump.c anim_util.c anim_util.h
+anim_dump_CPPFLAGS = $(AM_CPPFLAGS) $(PNG_INCLUDES)
+anim_dump_CPPFLAGS += $(GIF_INCLUDES)
+anim_dump_LDADD  =
+anim_dump_LDADD += ../src/demux/libwebpdemux.la
+anim_dump_LDADD += libexample_util.la
+anim_dump_LDADD += ../imageio/libimageio_util.la
+anim_dump_LDADD += ../imageio/libimageenc.la
+anim_dump_LDADD += $(PNG_LIBS) $(GIF_LIBS) $(TIFF_LIBS) -lm
+
 cwebp_SOURCES  = cwebp.c stopwatch.h
-cwebp_CPPFLAGS  = $(AM_CPPFLAGS) $(USE_EXPERIMENTAL_CODE)
-cwebp_LDADD  = libexample_util.la ../imageio/libimageio_util.la
-cwebp_LDADD += ../imageio/libimagedec.la ../src/libwebp.la
+cwebp_CPPFLAGS  = $(AM_CPPFLAGS)
+cwebp_LDADD  =
+cwebp_LDADD += libexample_util.la
+cwebp_LDADD += ../imageio/libimageio_util.la
+cwebp_LDADD += ../imageio/libimagedec.la
+cwebp_LDADD += ../src/libwebp.la
 cwebp_LDADD += $(JPEG_LIBS) $(PNG_LIBS) $(TIFF_LIBS)
 
 dwebp_SOURCES = dwebp.c stopwatch.h
-dwebp_CPPFLAGS  = $(AM_CPPFLAGS) $(USE_EXPERIMENTAL_CODE)
+dwebp_CPPFLAGS  = $(AM_CPPFLAGS)
 dwebp_CPPFLAGS += $(JPEG_INCLUDES) $(PNG_INCLUDES)
-dwebp_LDADD  = libexample_util.la
+dwebp_LDADD  =
+dwebp_LDADD += libexample_util.la
 dwebp_LDADD += ../imageio/libimagedec.la
 dwebp_LDADD += ../imageio/libimageenc.la
 dwebp_LDADD += ../imageio/libimageio_util.la
@@ -48,36 +67,53 @@ dwebp_LDADD += ../src/libwebp.la
 dwebp_LDADD +=$(PNG_LIBS) $(JPEG_LIBS)
 
 gif2webp_SOURCES = gif2webp.c gifdec.c gifdec.h
-gif2webp_CPPFLAGS = $(AM_CPPFLAGS) $(USE_EXPERIMENTAL_CODE) $(GIF_INCLUDES)
-gif2webp_LDADD  = libexample_util.la ../imageio/libimageio_util.la
-gif2webp_LDADD += ../src/mux/libwebpmux.la ../src/libwebp.la $(GIF_LIBS)
+gif2webp_CPPFLAGS = $(AM_CPPFLAGS) $(GIF_INCLUDES)
+gif2webp_LDADD  =
+gif2webp_LDADD += libexample_util.la
+gif2webp_LDADD += ../imageio/libimageio_util.la
+gif2webp_LDADD += ../src/mux/libwebpmux.la
+gif2webp_LDADD += ../src/libwebp.la
+gif2webp_LDADD += $(GIF_LIBS)
 
 vwebp_SOURCES = vwebp.c
-vwebp_CPPFLAGS = $(AM_CPPFLAGS) $(USE_EXPERIMENTAL_CODE) $(GL_INCLUDES)
-vwebp_LDADD  = libexample_util.la ../imageio/libimageio_util.la
-vwebp_LDADD += ../src/demux/libwebpdemux.la $(GL_LIBS)
+vwebp_CPPFLAGS = $(AM_CPPFLAGS) $(GL_INCLUDES)
+vwebp_LDADD  =
+vwebp_LDADD += libexample_util.la
+vwebp_LDADD += ../imageio/libimageio_util.la
+vwebp_LDADD += ../src/demux/libwebpdemux.la
+vwebp_LDADD += $(GL_LIBS)
 
 webpmux_SOURCES = webpmux.c
-webpmux_CPPFLAGS = $(AM_CPPFLAGS) $(USE_EXPERIMENTAL_CODE)
-webpmux_LDADD  = libexample_util.la ../imageio/libimageio_util.la
-webpmux_LDADD += ../src/mux/libwebpmux.la ../src/libwebp.la
+webpmux_CPPFLAGS = $(AM_CPPFLAGS)
+webpmux_LDADD  =
+webpmux_LDADD += libexample_util.la
+webpmux_LDADD += ../imageio/libimageio_util.la
+webpmux_LDADD += ../src/mux/libwebpmux.la
+webpmux_LDADD += ../src/libwebp.la
 
 img2webp_SOURCES = img2webp.c
-img2webp_CPPFLAGS = $(AM_CPPFLAGS) $(USE_EXPERIMENTAL_CODE)
-img2webp_LDADD  = libexample_util.la ../imageio/libimageio_util.la
+img2webp_CPPFLAGS = $(AM_CPPFLAGS)
+img2webp_LDADD  =
+img2webp_LDADD += libexample_util.la
+img2webp_LDADD += ../imageio/libimageio_util.la
 img2webp_LDADD += ../imageio/libimagedec.la
-img2webp_LDADD += ../src/mux/libwebpmux.la ../src/libwebp.la
+img2webp_LDADD += ../src/mux/libwebpmux.la
+img2webp_LDADD += ../src/libwebp.la
 img2webp_LDADD += $(PNG_LIBS) $(JPEG_LIBS) $(TIFF_LIBS)
 
 webpinfo_SOURCES = webpinfo.c
-webpinfo_CPPFLAGS = $(AM_CPPFLAGS) $(USE_EXPERIMENTAL_CODE)
-webpinfo_LDADD  = libexample_util.la ../imageio/libimageio_util.la
+webpinfo_CPPFLAGS = $(AM_CPPFLAGS)
+webpinfo_LDADD  =
+webpinfo_LDADD += libexample_util.la
+webpinfo_LDADD += ../imageio/libimageio_util.la
 webpinfo_LDADD += ../src/libwebp.la
 
 if BUILD_LIBWEBPDECODER
   anim_diff_LDADD += ../src/libwebpdecoder.la
+  anim_dump_LDADD += ../src/libwebpdecoder.la
   vwebp_LDADD += ../src/libwebpdecoder.la
 else
   anim_diff_LDADD += ../src/libwebp.la
+  anim_dump_LDADD += ../src/libwebp.la
   vwebp_LDADD += ../src/libwebp.la
 endif

examples/anim_diff.c

@@ -187,11 +187,9 @@ static void Help(void) {
   printf("  -min_psnr <float> ... minimum per-frame PSNR\n");
   printf("  -raw_comparison ..... if this flag is not used, RGB is\n");
   printf("                        premultiplied before comparison\n");
-#ifdef WEBP_EXPERIMENTAL_FEATURES
-  printf("  -max_diff <int> ..... maximum allowed difference per channel "
-         "                        between corresponding pixels in subsequent"
+  printf("  -max_diff <int> ..... maximum allowed difference per channel\n"
+         "                        between corresponding pixels in subsequent\n"
          "                        frames\n");
-#endif
 }
 
 int main(int argc, const char* argv[]) {
@@ -236,7 +234,6 @@ int main(int argc, const char* argv[]) {
       }
     } else if (!strcmp(argv[c], "-raw_comparison")) {
       premultiply = 0;
-#ifdef WEBP_EXPERIMENTAL_FEATURES
     } else if (!strcmp(argv[c], "-max_diff")) {
       if (c < argc - 1) {
         const char* const v = argv[++c];
@@ -250,7 +247,6 @@ int main(int argc, const char* argv[]) {
       } else {
         parse_error = 1;
       }
-#endif
     } else {
       if (!got_input1) {
         files[0] = argv[c];

examples/anim_dump.c

@@ -0,0 +1,104 @@
+// Copyright 2017 Google Inc. All Rights Reserved.
+//
+// Use of this source code is governed by a BSD-style license
+// that can be found in the COPYING file in the root of the source
+// tree. An additional intellectual property rights grant can be found
+// in the file PATENTS. All contributing project authors may
+// be found in the AUTHORS file in the root of the source tree.
+// -----------------------------------------------------------------------------
+//
+// Decodes an animated WebP file and dumps the decoded frames as PNG or TIFF.
+//
+// Author: Skal (pascal.massimino@gmail.com)
+
+#include <stdio.h>
+#include <string.h>  // for 'strcmp'.
+
+#include "./anim_util.h"
+#include "webp/decode.h"
+#include "../imageio/image_enc.h"
+
+#if defined(_MSC_VER) && _MSC_VER < 1900
+#define snprintf _snprintf
+#endif
+
+static void Help(void) {
+  printf("Usage: anim_dump [options] files...\n");
+  printf("\nOptions:\n");
+  printf("  -folder <string> .... dump folder (default: '.')\n");
+  printf("  -prefix <string> .... prefix for dumped frames "
+                                  "(default: 'dump_')\n");
+  printf("  -tiff ............... save frames as TIFF\n");
+  printf("  -pam ................ save frames as PAM\n");
+}
+
+int main(int argc, const char* argv[]) {
+  int error = 0;
+  const char* dump_folder = ".";
+  const char* prefix = "dump_";
+  const char* suffix = "png";
+  WebPOutputFileFormat format = PNG;
+  int c;
+
+  if (argc < 2) {
+    Help();
+    return -1;
+  }
+
+  for (c = 1; !error && c < argc; ++c) {
+    if (!strcmp(argv[c], "-folder")) {
+      if (c + 1 == argc) {
+        fprintf(stderr, "missing argument after option '%s'\n", argv[c]);
+        error = 1;
+        break;
+      }
+      dump_folder = argv[++c];
+    } else if (!strcmp(argv[c], "-prefix")) {
+      if (c + 1 == argc) {
+        fprintf(stderr, "missing argument after option '%s'\n", argv[c]);
+        error = 1;
+        break;
+      }
+      prefix = argv[++c];
+    } else if (!strcmp(argv[c], "-tiff")) {
+      format = TIFF;
+      suffix = "tiff";
+    } else if (!strcmp(argv[c], "-pam")) {
+      format = PAM;
+      suffix = "pam";
+    } else {
+      uint32_t i;
+      AnimatedImage image;
+      const char* const file = argv[c];
+      memset(&image, 0, sizeof(image));
+      printf("Decoding file: %s as %s/%sxxxx.%s\n",
+             file, dump_folder, prefix, suffix);
+      if (!ReadAnimatedImage(file, &image, 0, NULL)) {
+        fprintf(stderr, "Error decoding file: %s\n Aborting.\n", file);
+        error = 1;
+        break;
+      }
+      for (i = 0; !error && i < image.num_frames; ++i) {
+        char out_file[1024];
+        WebPDecBuffer buffer;
+        WebPInitDecBuffer(&buffer);
+        buffer.colorspace = MODE_RGBA;
+        buffer.is_external_memory = 1;
+        buffer.width = image.canvas_width;
+        buffer.height = image.canvas_height;
+        buffer.u.RGBA.rgba = image.frames[i].rgba;
+        buffer.u.RGBA.stride = buffer.width * sizeof(uint32_t);
+        buffer.u.RGBA.size = buffer.u.RGBA.stride * buffer.height;
+        snprintf(out_file, sizeof(out_file), "%s/%s%.4d.%s",
+                 dump_folder, prefix, i, suffix);
+        if (!WebPSaveImage(&buffer, format, out_file)) {
+          fprintf(stderr, "Error while saving image '%s'\n", out_file);
+          error = 1;
+        }
+        WebPFreeDecBuffer(&buffer);
+      }
+      ClearAnimatedImage(&image);
+    }
+  }
+  return error ? 1 : 0;
+}

examples/anim_util.c

@@ -16,7 +16,7 @@
 #include <stdio.h>
 #include <string.h>
 
-#ifdef WEBP_HAVE_GIF
+#if defined(WEBP_HAVE_GIF)
 #include <gif_lib.h>
 #endif
 #include "webp/format_constants.h"
@@ -33,11 +33,13 @@ static const int kNumChannels = 4;
 // -----------------------------------------------------------------------------
 // Common utilities.
 
+#if defined(WEBP_HAVE_GIF)
 // Returns true if the frame covers the full canvas.
 static int IsFullFrame(int width, int height,
                        int canvas_width, int canvas_height) {
   return (width == canvas_width && height == canvas_height);
 }
+#endif // WEBP_HAVE_GIF
 
 static int CheckSizeForOverflow(uint64_t size) {
   return (size == (size_t)size);
@@ -85,6 +87,7 @@ void ClearAnimatedImage(AnimatedImage* const image) {
   }
 }
 
+#if defined(WEBP_HAVE_GIF)
 // Clear the canvas to transparent.
 static void ZeroFillCanvas(uint8_t* rgba,
                            uint32_t canvas_width, uint32_t canvas_height) {
@@ -126,6 +129,7 @@ static void CopyFrameRectangle(const uint8_t* src, uint8_t* dst, int stride,
     dst += stride;
   }
 }
+#endif // WEBP_HAVE_GIF
 
 // Canonicalize all transparent pixels to transparent black to aid comparison.
 static void CleanupTransparentPixels(uint32_t* rgba,
@@ -152,6 +156,8 @@ static int DumpFrame(const char filename[], const char dump_folder[],
   FILE* f = NULL;
   const char* row;
 
+  if (dump_folder == NULL) dump_folder = ".";
+
   base_name = strrchr(filename, '/');
   base_name = (base_name == NULL) ? filename : base_name + 1;
   max_len = strlen(dump_folder) + 1 + strlen(base_name)
@@ -200,7 +206,7 @@ static int IsWebP(const WebPData* const webp_data) {
   return (WebPGetInfo(webp_data->bytes, webp_data->size, NULL, NULL) != 0);
 }
 
-// Read animated WebP bitstream 'file_str' into 'AnimatedImage' struct.
+// Read animated WebP bitstream 'webp_data' into 'AnimatedImage' struct.
 static int ReadAnimatedWebP(const char filename[],
                             const WebPData* const webp_data,
                             AnimatedImage* const image, int dump_frames,
@@ -278,7 +284,7 @@ static int ReadAnimatedWebP(const char filename[],
 // -----------------------------------------------------------------------------
 // GIF Decoding.
 
-#ifdef WEBP_HAVE_GIF
+#if defined(WEBP_HAVE_GIF)
 
 // Returns true if this is a valid GIF bitstream.
 static int IsGIF(const WebPData* const data) {
@@ -423,6 +429,11 @@ static uint32_t GetBackgroundColorGIF(GifFileType* gif) {
 }
 
 // Find appropriate app extension and get loop count from the next extension.
+// We use Chrome's interpretation of the 'loop_count' semantics:
+//   if not present -> loop once
+//   if present and loop_count == 0, return 0 ('infinite').
+//   if present and loop_count != 0, it's the number of *extra* loops
+//     so we need to return loop_count + 1 as total loop number.
 static uint32_t GetLoopCountGIF(const GifFileType* const gif) {
   int i;
   for (i = 0; i < gif->ImageCount; ++i) {
@@ -440,12 +451,13 @@ static uint32_t GetLoopCountGIF(const GifFileType* const gif) {
       if (signature_is_ok &&
           eb2->Function == CONTINUE_EXT_FUNC_CODE && eb2->ByteCount >= 3 &&
           eb2->Bytes[0] == 1) {
-        return ((uint32_t)(eb2->Bytes[2]) << 8) +
-               ((uint32_t)(eb2->Bytes[1]) << 0);
+        const uint32_t extra_loop = ((uint32_t)(eb2->Bytes[2]) << 8) +
+                                    ((uint32_t)(eb2->Bytes[1]) << 0);
+        return (extra_loop > 0) ? extra_loop + 1 : 0;
       }
     }
   }
-  return 0;  // Default.
+  return 1;  // Default.
 }
 
 // Get duration of 'n'th frame in milliseconds.
@@ -581,6 +593,9 @@ static int ReadAnimatedGIF(const char filename[], AnimatedImage* const image,
     curr_frame = &image->frames[i];
     curr_rgba = curr_frame->rgba;
     curr_frame->duration = GetFrameDurationGIF(gif, i);
+    // Force frames with a small or no duration to 100ms to be consistent
+    // with web browsers and other transcoding tools (like gif2webp itself).
+    if (curr_frame->duration <= 10) curr_frame->duration = 100;
 
     if (i == 0) {  // Initialize as transparent.
       curr_frame->is_key_frame = 1;

examples/cwebp.c

@@ -140,10 +140,11 @@ static void PrintByteCount(const int bytes[4], int total_size,
   fprintf(stderr, "| %7d  (%.1f%%)\n", total, 100.f * total / total_size);
 }
 
-static void PrintPercents(const int counts[4], int total) {
+static void PrintPercents(const int counts[4]) {
   int s;
+  const int total = counts[0] + counts[1] + counts[2] + counts[3];
   for (s = 0; s < 4; ++s) {
-    fprintf(stderr, "|      %2d%%", 100 * counts[s] / total);
+    fprintf(stderr, "|      %2d%%", (int)(100. * counts[s] / total + .5));
   }
   fprintf(stderr, "| %7d\n", total);
 }
@@ -186,7 +187,8 @@ static void PrintExtraInfoLossless(const WebPPicture* const pic,
   } else {
     fprintf(stderr, "File:      %s\n", file_name);
     fprintf(stderr, "Dimension: %d x %d\n", pic->width, pic->height);
-    fprintf(stderr, "Output:    %d bytes\n", stats->coded_size);
+    fprintf(stderr, "Output:    %d bytes (%.2f bpp)\n", stats->coded_size,
+            8.f * stats->coded_size / pic->width / pic->height);
     PrintFullLosslessInfo(stats, "ARGB");
   }
 }
@@ -207,15 +209,18 @@ static void PrintExtraInfoLossy(const WebPPicture* const pic, int short_output,
             pic->width, pic->height,
             stats->alpha_data_size ? " (with alpha)" : "");
     fprintf(stderr, "Output:    "
-            "%d bytes Y-U-V-All-PSNR %2.2f %2.2f %2.2f   %2.2f dB\n",
+            "%d bytes Y-U-V-All-PSNR %2.2f %2.2f %2.2f   %2.2f dB\n"
+            "           (%.2f bpp)\n",
             stats->coded_size,
-            stats->PSNR[0], stats->PSNR[1], stats->PSNR[2], stats->PSNR[3]);
+            stats->PSNR[0], stats->PSNR[1], stats->PSNR[2], stats->PSNR[3],
+            8.f * stats->coded_size / pic->width / pic->height);
     if (total > 0) {
       int totals[4] = { 0, 0, 0, 0 };
-      fprintf(stderr, "block count:  intra4: %d\n"
-                      "              intra16: %d  (-> %.2f%%)\n",
-              num_i4, num_i16, 100.f * num_i16 / total);
-      fprintf(stderr, "              skipped block: %d (%.2f%%)\n",
+      fprintf(stderr, "block count:  intra4:     %6d  (%.2f%%)\n"
+                      "              intra16:    %6d  (%.2f%%)\n"
+                      "              skipped:    %6d  (%.2f%%)\n",
+              num_i4, 100.f * num_i4 / total,
+              num_i16, 100.f * num_i16 / total,
               num_skip, 100.f * num_skip / total);
       fprintf(stderr, "bytes used:  header:         %6d  (%.1f%%)\n"
                       "             mode-partition: %6d  (%.1f%%)\n",
@@ -239,7 +244,7 @@ static void PrintExtraInfoLossy(const WebPPicture* const pic, int short_output,
         PrintByteCount(stats->residual_bytes[2], stats->coded_size, totals);
       }
       fprintf(stderr, "    macroblocks:  ");
-      PrintPercents(stats->segment_size, total);
+      PrintPercents(stats->segment_size);
       fprintf(stderr, "      quantizer:  ");
       PrintValues(stats->segment_quant);
       fprintf(stderr, "   filter level:  ");
@@ -463,8 +468,9 @@ static int WriteWebPWithMetadata(FILE* const out,
     } else {
       const int is_lossless = !memcmp(webp, "VP8L", kTagSize);
       if (is_lossless) {
-        // Presence of alpha is stored in the 29th bit of VP8L data.
-        if (webp[kChunkHeaderSize + 3] & (1 << 5)) flags |= kAlphaFlag;
+        // Presence of alpha is stored in the 37th bit (29th after the
+        // signature) of VP8L data.
+        if (webp[kChunkHeaderSize + 4] & (1 << 4)) flags |= kAlphaFlag;
       }
       ok = ok && (fwrite(kVP8XHeader, kChunkHeaderSize, 1, out) == 1);
       ok = ok && WriteLE32(out, flags);
@@ -486,10 +492,10 @@ static int WriteWebPWithMetadata(FILE* const out,
       *metadata_written |= METADATA_XMP;
     }
     return ok;
-  } else {
-    // No metadata, just write the original image file.
-    return (fwrite(webp, webp_size, 1, out) == 1);
   }
+
+  // No metadata, just write the original image file.
+  return (fwrite(webp, webp_size, 1, out) == 1);
 }
 
 //------------------------------------------------------------------------------
@@ -579,9 +585,6 @@ static void HelpLong(void) {
   printf("  -near_lossless <int> ... use near-lossless image\n"
          "                           preprocessing (0..100=off), "
          "default=100\n");
-#ifdef WEBP_EXPERIMENTAL_FEATURES  /* not documented yet */
-  printf("  -delta_palette ......... use delta palettization\n");
-#endif  // WEBP_EXPERIMENTAL_FEATURES
   printf("  -hint <string> ......... specify image characteristics hint,\n");
   printf("                           one of: photo, picture or graph\n");
 
@@ -750,11 +753,6 @@ int main(int argc, const char *argv[]) {
     } else if (!strcmp(argv[c], "-near_lossless") && c < argc - 1) {
       config.near_lossless = ExUtilGetInt(argv[++c], 0, &parse_error);
       config.lossless = 1;  // use near-lossless only with lossless
-#ifdef WEBP_EXPERIMENTAL_FEATURES
-    } else if (!strcmp(argv[c], "-delta_palette")) {
-      config.use_delta_palette = 1;
-      config.lossless = 1;  // delta-palette is for lossless only
-#endif  // WEBP_EXPERIMENTAL_FEATURES
     } else if (!strcmp(argv[c], "-hint") && c < argc - 1) {
       ++c;
       if (!strcmp(argv[c], "photo")) {

examples/example_util.c

@@ -12,10 +12,14 @@
 
 #include "./example_util.h"
 
+#include <assert.h>
 #include <stdio.h>
 #include <stdlib.h>
 #include <string.h>
 
+#include "webp/mux_types.h"
+#include "../imageio/imageio_util.h"
+
 //------------------------------------------------------------------------------
 // String parsing
 
@@ -56,3 +60,68 @@ float ExUtilGetFloat(const char* const v, int* const error) {
   }
   return f;
 }
+
+//------------------------------------------------------------------------------
+
+static void ResetCommandLineArguments(int argc, const char* argv[],
+                                      CommandLineArguments* const args) {
+  assert(args != NULL);
+  args->argc_ = argc;
+  args->argv_ = argv;
+  args->own_argv_ = 0;
+  WebPDataInit(&args->argv_data_);
+}
+
+void ExUtilDeleteCommandLineArguments(CommandLineArguments* const args) {
+  if (args != NULL) {
+    if (args->own_argv_) {
+      free((void*)args->argv_);
+      WebPDataClear(&args->argv_data_);
+    }
+    ResetCommandLineArguments(0, NULL, args);
+  }
+}
+
+#define MAX_ARGC 16384
+int ExUtilInitCommandLineArguments(int argc, const char* argv[],
+                                   CommandLineArguments* const args) {
+  if (args == NULL || argv == NULL) return 0;
+  ResetCommandLineArguments(argc, argv, args);
+  if (argc == 1 && argv[0][0] != '-') {
+    char* cur;
+    const char sep[] = " \t\r\n\f\v";
+    if (!ExUtilReadFileToWebPData(argv[0], &args->argv_data_)) {
+      return 0;
+    }
+    args->own_argv_ = 1;
+    args->argv_ = (const char**)malloc(MAX_ARGC * sizeof(*args->argv_));
+    if (args->argv_ == NULL) return 0;
+
+    argc = 0;
+    for (cur = strtok((char*)args->argv_data_.bytes, sep);
+         cur != NULL;
+         cur = strtok(NULL, sep)) {
+      if (argc == MAX_ARGC) {
+        fprintf(stderr, "ERROR: Arguments limit %d reached\n", MAX_ARGC);
+        return 0;
+      }
+      assert(strlen(cur) != 0);
+      args->argv_[argc++] = cur;
+    }
+    args->argc_ = argc;
+  }
+  return 1;
+}
+
+//------------------------------------------------------------------------------
+
+int ExUtilReadFileToWebPData(const char* const filename,
+                             WebPData* const webp_data) {
+  const uint8_t* data;
+  size_t size;
+  if (webp_data == NULL) return 0;
+  if (!ImgIoUtilReadFile(filename, &data, &size)) return 0;
+  webp_data->bytes = data;
+  webp_data->size = size;
+  return 1;
+}

examples/example_util.h

@@ -14,6 +14,7 @@
 #define WEBP_EXAMPLES_EXAMPLE_UTIL_H_
 
 #include "webp/types.h"
+#include "webp/mux_types.h"
 
 #ifdef __cplusplus
 extern "C" {
@@ -35,6 +36,33 @@ float ExUtilGetFloat(const char* const v, int* const error);
 // actually parsed is returned, or -1 if an error occurred.
 int ExUtilGetInts(const char* v, int base, int max_output, int output[]);
 
+// Reads a file named 'filename' into a WebPData structure. The content of
+// webp_data is overwritten. Returns false in case of error.
+int ExUtilReadFileToWebPData(const char* const filename,
+                             WebPData* const webp_data);
+
+//------------------------------------------------------------------------------
+// Command-line arguments
+
+typedef struct {
+  int argc_;
+  const char** argv_;
+  WebPData argv_data_;
+  int own_argv_;
+} CommandLineArguments;
+
+// Initializes the structure from the command-line parameters. If there is
+// only one parameter and it does not start with a '-', then it is assumed to
+// be a file name. This file will be read and tokenized into command-line
+// arguments. The content of 'args' is overwritten.
+// Returns false in case of error (memory allocation failure, non
+// existing file, too many arguments, ...).
+int ExUtilInitCommandLineArguments(int argc, const char* argv[],
+                                   CommandLineArguments* const args);
+
+// Deallocate all memory and reset 'args'.
+void ExUtilDeleteCommandLineArguments(CommandLineArguments* const args);
+
 #ifdef __cplusplus
 }    // extern "C"
 #endif

examples/gif2webp.c

@@ -23,6 +23,10 @@
 
 #ifdef WEBP_HAVE_GIF
 
+#if defined(HAVE_UNISTD_H) && HAVE_UNISTD_H
+#include <unistd.h>
+#endif
+
 #include <gif_lib.h>
 #include "webp/encode.h"
 #include "webp/mux.h"
@@ -30,6 +34,10 @@
 #include "../imageio/imageio_util.h"
 #include "./gifdec.h"
 
+#if !defined(STDIN_FILENO)
+#define STDIN_FILENO 0
+#endif
+
 //------------------------------------------------------------------------------
 
 static int transparent_index = GIF_INDEX_INVALID;  // Opaque by default.
@@ -72,8 +80,10 @@ static void Help(void) {
   printf("  -metadata <string> ..... comma separated list of metadata to\n");
   printf("                           ");
   printf("copy from the input to the output if present\n");
-  printf("                           "
-         "Valid values: all, none, icc, xmp (default)\n");
+  printf("                           ");
+  printf("Valid values: all, none, icc, xmp (default)\n");
+  printf("  -loop_compatibility .... use compatibility mode for Chrome\n");
+  printf("                           version prior to M62 (inclusive)\n");
   printf("  -mt .................... use multi-threading if available\n");
   printf("\n");
   printf("  -version ............... print version number and exit\n");
@@ -104,7 +114,7 @@ int main(int argc, const char *argv[]) {
   WebPAnimEncoderOptions enc_options;
   WebPConfig config;
 
-  int is_first_frame = 1;     // Whether we are processing the first frame.
+  int frame_number = 0;     // Whether we are processing the first frame.
   int done;
   int c;
   int quiet = 0;
@@ -115,8 +125,9 @@ int main(int argc, const char *argv[]) {
   int stored_icc = 0;         // Whether we have already stored an ICC profile.
   WebPData xmp_data;
   int stored_xmp = 0;         // Whether we have already stored an XMP profile.
-  int loop_count = 0;
+  int loop_count = 0;         // default: infinite
   int stored_loop_count = 0;  // Whether we have found an explicit loop count.
+  int loop_compatibility = 0;
   WebPMux* mux = NULL;
 
   int default_kmin = 1;  // Whether to use default kmin value.
@@ -151,6 +162,8 @@ int main(int argc, const char *argv[]) {
     } else if (!strcmp(argv[c], "-mixed")) {
       enc_options.allow_mixed = 1;
       config.lossless = 0;
+    } else if (!strcmp(argv[c], "-loop_compatibility")) {
+      loop_compatibility = 1;
     } else if (!strcmp(argv[c], "-q") && c < argc - 1) {
       config.quality = ExUtilGetFloat(argv[++c], &parse_error);
     } else if (!strcmp(argv[c], "-m") && c < argc - 1) {
@@ -258,9 +271,11 @@ int main(int argc, const char *argv[]) {
 
   // Start the decoder object
 #if LOCAL_GIF_PREREQ(5,0)
-  gif = DGifOpenFileName(in_file, &gif_error);
+  gif = !strcmp(in_file, "-") ? DGifOpenFileHandle(STDIN_FILENO, &gif_error)
+                              : DGifOpenFileName(in_file, &gif_error);
 #else
-  gif = DGifOpenFileName(in_file);
+  gif = !strcmp(in_file, "-") ? DGifOpenFileHandle(STDIN_FILENO)
+                              : DGifOpenFileName(in_file);
 #endif
   if (gif == NULL) goto End;
 
@@ -277,7 +292,7 @@ int main(int argc, const char *argv[]) {
 
         if (!DGifGetImageDesc(gif)) goto End;
 
-        if (is_first_frame) {
+        if (frame_number == 0) {
           if (verbose) {
             printf("Canvas screen: %d x %d\n", gif->SWidth, gif->SHeight);
           }
@@ -319,7 +334,6 @@ int main(int argc, const char *argv[]) {
                     "a memory error.\n");
             goto End;
           }
-          is_first_frame = 0;
         }
 
         // Some even more broken GIF can have sub-rect with zero width/height.
@@ -336,13 +350,25 @@ int main(int argc, const char *argv[]) {
         GIFBlendFrames(&frame, &gif_rect, &curr_canvas);
 
         if (!WebPAnimEncoderAdd(enc, &curr_canvas, frame_timestamp, &config)) {
-          fprintf(stderr, "%s\n", WebPAnimEncoderGetError(enc));
+          fprintf(stderr, "Error while adding frame #%d: %s\n", frame_number,
+                  WebPAnimEncoderGetError(enc));
+          goto End;
+        } else {
+          ++frame_number;
         }
 
         // Update canvases.
         GIFDisposeFrame(orig_dispose, &gif_rect, &prev_canvas, &curr_canvas);
         GIFCopyPixels(&curr_canvas, &prev_canvas);
 
+        // Force frames with a small or no duration to 100ms to be consistent
+        // with web browsers and other transcoding tools. This also avoids
+        // incorrect durations between frames when padding frames are
+        // discarded.
+        if (frame_duration <= 10) {
+          frame_duration = 100;
+        }
+
         // Update timestamp (for next frame).
         frame_timestamp += frame_duration;
 
@@ -386,7 +412,7 @@ int main(int argc, const char *argv[]) {
               if (verbose) {
                 fprintf(stderr, "Loop count: %d\n", loop_count);
               }
-              stored_loop_count = (loop_count != 0);
+              stored_loop_count = loop_compatibility ? (loop_count != 0) : 1;
             } else {  // An extension containing metadata.
               // We only store the first encountered chunk of each type, and
               // only if requested by the user.
@@ -443,6 +469,23 @@ int main(int argc, const char *argv[]) {
     goto End;
   }
 
+  if (!loop_compatibility) {
+    if (!stored_loop_count) {
+      // if no loop-count element is seen, the default is '1' (loop-once)
+      // and we need to signal it explicitly in WebP. Note however that
+      // in case there's a single frame, we still don't need to store it.
+      if (frame_number > 1) {
+        stored_loop_count = 1;
+        loop_count = 1;
+      }
+    } else if (loop_count > 0) {
+      // adapt GIF's semantic to WebP's (except in the infinite-loop case)
+      loop_count += 1;
+    }
+  }
+  // loop_count of 0 is the default (infinite), so no need to signal it
+  if (loop_count == 0) stored_loop_count = 0;
+
   if (stored_loop_count || stored_icc || stored_xmp) {
     // Re-mux to add loop count and/or metadata as needed.
     mux = WebPMuxCreate(&webp_data, 1);
@@ -507,8 +550,13 @@ int main(int argc, const char *argv[]) {
       goto End;
     }
     if (!quiet) {
-      fprintf(stderr, "Saved output file (%d bytes): %s\n",
-              (int)webp_data.size, out_file);
+      if (!strcmp(out_file, "-")) {
+        fprintf(stderr, "Saved %d bytes to STDIO\n",
+                (int)webp_data.size);
+      } else {
+        fprintf(stderr, "Saved output file (%d bytes): %s\n",
+                (int)webp_data.size, out_file);
+      }
     }
   } else {
     if (!quiet) {

examples/img2webp.c

@@ -117,14 +117,13 @@ static int SetLoopCount(int loop_count, WebPData* const webp_data) {
 
 //------------------------------------------------------------------------------
 
-int main(int argc, char* argv[]) {
+int main(int argc, const char* argv[]) {
   const char* output = NULL;
   WebPAnimEncoder* enc = NULL;
   int verbose = 0;
   int pic_num = 0;
   int duration = 100;
   int timestamp_ms = 0;
-  int ok = 1;
   int loop_count = 0;
   int width = 0, height = 0;
   WebPAnimEncoderOptions anim_config;
@@ -133,17 +132,23 @@ int main(int argc, char* argv[]) {
   WebPData webp_data;
   int c;
   int have_input = 0;
+  CommandLineArguments cmd_args;
+  int ok = ExUtilInitCommandLineArguments(argc - 1, argv + 1, &cmd_args);
+  if (!ok) return 1;
+  argc = cmd_args.argc_;
+  argv = cmd_args.argv_;
 
   WebPDataInit(&webp_data);
   if (!WebPAnimEncoderOptionsInit(&anim_config) ||
       !WebPConfigInit(&config) ||
       !WebPPictureInit(&pic)) {
     fprintf(stderr, "Library version mismatch!\n");
-    return 1;
+    ok = 0;
+    goto End;
   }
 
   // 1st pass of option parsing
-  for (c = 1; ok && c < argc; ++c) {
+  for (c = 0; ok && c < argc; ++c) {
     if (argv[c][0] == '-') {
       int parse_error = 0;
       if (!strcmp(argv[c], "-o") && c + 1 < argc) {
@@ -171,7 +176,7 @@ int main(int argc, char* argv[]) {
         verbose = 1;
       } else if (!strcmp(argv[c], "-h") || !strcmp(argv[c], "-help")) {
         Help();
-        return 0;
+        goto End;
       } else {
         continue;
       }
@@ -184,13 +189,13 @@ int main(int argc, char* argv[]) {
   }
   if (!have_input) {
     fprintf(stderr, "No input file(s) for generating animation!\n");
-    return 0;
+    goto End;
   }
 
   // image-reading pass
   pic_num = 0;
   config.lossless = 1;
-  for (c = 1; ok && c < argc; ++c) {
+  for (c = 0; ok && c < argc; ++c) {
     if (argv[c] == NULL) continue;
     if (argv[c][0] == '-') {    // parse local options
       int parse_error = 0;
@@ -294,7 +299,7 @@ int main(int argc, char* argv[]) {
     fprintf(stderr, "[%d frames, %u bytes].\n",
             pic_num, (unsigned int)webp_data.size);
   }
-
   WebPDataClear(&webp_data);
+  ExUtilDeleteCommandLineArguments(&cmd_args);
   return ok ? 0 : 1;
 }

examples/vwebp.c

@@ -248,9 +248,9 @@ static void HandleKey(unsigned char key, int pos_x, int pos_y) {
       }
     }
   } else if (key == 'i') {
+    // Note: doesn't handle refresh of animation's last-frame (it's quite
+    // more involved to do, since you need to save the previous frame).
     kParams.print_info = 1 - kParams.print_info;
-    // TODO(skal): handle refresh of animation's last-frame too. It's quite
-    // more involved though (need to save the previous frame).
     if (!kParams.has_animation) ClearPreviousFrame();
     glutPostRedisplay();
   } else if (key == 'd') {
@@ -260,8 +260,8 @@ static void HandleKey(unsigned char key, int pos_x, int pos_y) {
 }
 
 static void HandleReshape(int width, int height) {
-  // TODO(skal): should we preserve aspect ratio?
-  // Also: handle larger-than-screen pictures correctly.
+  // Note: reshape doesn't preserve aspect ratio, and might
+  // be handling larger-than-screen pictures incorrectly.
   glViewport(0, 0, width, height);
   glMatrixMode(GL_PROJECTION);
   glLoadIdentity();
@@ -378,13 +378,23 @@ static void HandleDisplay(void) {
     }
   }
   glPopMatrix();
+#if defined(__APPLE__) || defined(_WIN32)
+  glFlush();
+#else
   glutSwapBuffers();
+#endif
 }
 
 static void StartDisplay(void) {
   const int width = kParams.canvas_width;
   const int height = kParams.canvas_height;
+  // TODO(webp:365) GLUT_DOUBLE results in flickering / old frames to be
+  // partially displayed with animated webp + alpha.
+#if defined(__APPLE__) || defined(_WIN32)
+  glutInitDisplayMode(GLUT_RGBA);
+#else
   glutInitDisplayMode(GLUT_DOUBLE | GLUT_RGBA);
+#endif
   glutInitWindowSize(width, height);
   glutCreateWindow("WebP viewer");
   glutDisplayFunc(HandleDisplay);

examples/webpinfo.c

@@ -233,20 +233,20 @@ static int GetSignedBits(const uint8_t* const data, size_t data_size, size_t nb,
   return 1;
 }
 
-#define GET_BITS(v, n)                               \
-  do {                                               \
-    if (!GetBits(data, data_size, n, &v, bit_pos)) { \
-      LOG_ERROR("Truncated lossy bitstream.");       \
-      return WEBP_INFO_TRUNCATED_DATA;               \
-    }                                                \
+#define GET_BITS(v, n)                                 \
+  do {                                                 \
+    if (!GetBits(data, data_size, n, &(v), bit_pos)) { \
+      LOG_ERROR("Truncated lossy bitstream.");         \
+      return WEBP_INFO_TRUNCATED_DATA;                 \
+    }                                                  \
   } while (0)
 
-#define GET_SIGNED_BITS(v, n)                              \
-  do {                                                     \
-    if (!GetSignedBits(data, data_size, n, &v, bit_pos)) { \
-      LOG_ERROR("Truncated lossy bitstream.");             \
-      return WEBP_INFO_TRUNCATED_DATA;                     \
-    }                                                      \
+#define GET_SIGNED_BITS(v, n)                                \
+  do {                                                       \
+    if (!GetSignedBits(data, data_size, n, &(v), bit_pos)) { \
+      LOG_ERROR("Truncated lossy bitstream.");               \
+      return WEBP_INFO_TRUNCATED_DATA;                       \
+    }                                                        \
   } while (0)
 
 static WebPInfoStatus ParseLossySegmentHeader(const WebPInfo* const webp_info,
@@ -340,7 +340,7 @@ static WebPInfoStatus ParseLossyHeader(const ChunkData* const chunk_data,
   WebPInfoStatus status = WEBP_INFO_OK;
   uint64_t bit_position = 0;
   uint64_t* const bit_pos = &bit_position;
-  int color_space, clamp_type;
+  int colorspace, clamp_type;
   printf("  Parsing lossy bitstream...\n");
   // Calling WebPGetFeatures() in ProcessImageChunk() should ensure this.
   assert(chunk_data->size_ >= CHUNK_HEADER_SIZE + 10);
@@ -381,9 +381,9 @@ static WebPInfoStatus ParseLossyHeader(const ChunkData* const chunk_data,
     LOG_ERROR("Bad partition length.");
     return WEBP_INFO_BITSTREAM_ERROR;
   }
-  GET_BITS(color_space, 1);
+  GET_BITS(colorspace, 1);
   GET_BITS(clamp_type, 1);
-  printf("  Color space:      %d\n", color_space);
+  printf("  Color space:      %d\n", colorspace);
   printf("  Clamp type:       %d\n", clamp_type);
   status = ParseLossySegmentHeader(webp_info, data, data_size, bit_pos);
   if (status != WEBP_INFO_OK) return status;
@@ -462,12 +462,12 @@ static int LLGetBits(const uint8_t* const data, size_t data_size, size_t nb,
   return 1;
 }
 
-#define LL_GET_BITS(v, n)                              \
-  do {                                                 \
-    if (!LLGetBits(data, data_size, n, &v, bit_pos)) { \
-      LOG_ERROR("Truncated lossless bitstream.");      \
-      return WEBP_INFO_TRUNCATED_DATA;                 \
-    }                                                  \
+#define LL_GET_BITS(v, n)                                \
+  do {                                                   \
+    if (!LLGetBits(data, data_size, n, &(v), bit_pos)) { \
+      LOG_ERROR("Truncated lossless bitstream.");        \
+      return WEBP_INFO_TRUNCATED_DATA;                   \
+    }                                                    \
   } while (0)
 
 static WebPInfoStatus ParseLosslessTransform(WebPInfo* const webp_info,
@@ -817,9 +817,8 @@ static WebPInfoStatus ProcessImageChunk(const ChunkData* const chunk_data,
     if (webp_info->seen_image_subchunk_) {
       LOG_ERROR("Consecutive VP8/VP8L sub-chunks in an ANMF chunk.");
       return WEBP_INFO_PARSE_ERROR;
-    } else {
-      webp_info->seen_image_subchunk_ = 1;
     }
+    webp_info->seen_image_subchunk_ = 1;
   } else {
     if (webp_info->chunk_counts_[CHUNK_VP8] ||
         webp_info->chunk_counts_[CHUNK_VP8L]) {
@@ -873,9 +872,9 @@ static WebPInfoStatus ProcessALPHChunk(const ChunkData* const chunk_data,
     if (webp_info->seen_alpha_subchunk_) {
       LOG_ERROR("Consecutive ALPH sub-chunks in an ANMF chunk.");
       return WEBP_INFO_PARSE_ERROR;
-    } else {
-      webp_info->seen_alpha_subchunk_ = 1;
     }
+    webp_info->seen_alpha_subchunk_ = 1;
+
     if (webp_info->seen_image_subchunk_) {
       LOG_ERROR("ALPHA sub-chunk detected after VP8 sub-chunk "
                 "in an ANMF chunk.");
@@ -1107,6 +1106,7 @@ static void HelpLong(void) {
          "Note: there could be multiple input files;\n"
          "      options must come before input files.\n"
          "Options:\n"
+         "  -version ........... Print version number and exit.\n"
          "  -quiet ............. Do not show chunk parsing information.\n"
          "  -diag .............. Show parsing error diagnosis.\n"
          "  -summary ........... Show chunk stats summary.\n"
@@ -1140,6 +1140,11 @@ int main(int argc, const char* argv[]) {
       show_summary = 1;
     } else if (!strcmp(argv[c], "-bitstream_info")) {
       parse_bitstream = 1;
+    } else if (!strcmp(argv[c], "-version")) {
+      const int version = WebPGetDecoderVersion();
+      printf("WebP Decoder version: %d.%d.%d\n",
+             (version >> 16) & 0xff, (version >> 8) & 0xff, version & 0xff);
+      return 0;
     } else {  // Assume the remaining are all input files.
       break;
     }

examples/webpmux.c

@@ -47,6 +47,7 @@
     webpmux -info in.webp
     webpmux [ -h | -help ]
     webpmux -version
+    webpmux argument_file_name
 */
 
 #ifdef HAVE_CONFIG_H
@@ -108,28 +109,26 @@ static const char* const kDescriptions[LAST_FEATURE] = {
 };
 
 typedef struct {
-  FeatureType type_;
-  FeatureArg* args_;
-  int arg_count_;
-} Feature;
+  CommandLineArguments cmd_args_;
 
-typedef struct {
   ActionType action_type_;
   const char* input_;
   const char* output_;
-  Feature feature_;
-} WebPMuxConfig;
+  FeatureType type_;
+  FeatureArg* args_;
+  int arg_count_;
+} Config;
 
 //------------------------------------------------------------------------------
 // Helper functions.
 
-static int CountOccurrences(const char* arglist[], int list_length,
-                            const char* arg) {
+static int CountOccurrences(const CommandLineArguments* const args,
+                            const char* const arg) {
   int i;
   int num_occurences = 0;
 
-  for (i = 0; i < list_length; ++i) {
-    if (!strcmp(arglist[i], arg)) {
+  for (i = 0; i < args->argc_; ++i) {
+    if (!strcmp(args->argv_[i], arg)) {
       ++num_occurences;
     }
   }
@@ -301,6 +300,7 @@ static void PrintHelp(void) {
   printf("       webpmux -info INPUT\n");
   printf("       webpmux [-h|-help]\n");
   printf("       webpmux -version\n");
+  printf("       webpmux argument_file_name\n");
 
   printf("\n");
   printf("GET_OPTIONS:\n");
@@ -369,6 +369,10 @@ static void PrintHelp(void) {
 
   printf("\nNote: The nature of EXIF, XMP and ICC data is not checked");
   printf(" and is assumed to be\nvalid.\n");
+  printf("\nNote: if a single file name is passed as the argument, the "
+         "arguments will be\n");
+  printf("tokenized from this file. The file name must not start with "
+         "the character '-'.\n");
 }
 
 static void WarnAboutOddOffset(const WebPMuxFrameInfo* const info) {
@@ -379,22 +383,12 @@ static void WarnAboutOddOffset(const WebPMuxFrameInfo* const info) {
   }
 }
 
-static int ReadFileToWebPData(const char* const filename,
-                              WebPData* const webp_data) {
-  const uint8_t* data;
-  size_t size;
-  if (!ImgIoUtilReadFile(filename, &data, &size)) return 0;
-  webp_data->bytes = data;
-  webp_data->size = size;
-  return 1;
-}
-
 static int CreateMux(const char* const filename, WebPMux** mux) {
   WebPData bitstream;
   assert(mux != NULL);
-  if (!ReadFileToWebPData(filename, &bitstream)) return 0;
+  if (!ExUtilReadFileToWebPData(filename, &bitstream)) return 0;
   *mux = WebPMuxCreate(&bitstream, 1);
-  free((void*)bitstream.bytes);
+  WebPDataClear(&bitstream);
   if (*mux != NULL) return 1;
   fprintf(stderr, "Failed to create mux object from file %s.\n", filename);
   return 0;
@@ -517,9 +511,10 @@ static int ParseBgcolorArgs(const char* args, uint32_t* const bgcolor) {
 //------------------------------------------------------------------------------
 // Clean-up.
 
-static void DeleteConfig(WebPMuxConfig* config) {
+static void DeleteConfig(Config* const config) {
   if (config != NULL) {
-    free(config->feature_.args_);
+    free(config->args_);
+    ExUtilDeleteCommandLineArguments(&config->cmd_args_);
     memset(config, 0, sizeof(*config));
   }
 }
@@ -531,7 +526,7 @@ static void DeleteConfig(WebPMuxConfig* config) {
 // Returns 1 on valid, 0 otherwise.
 // Also fills up num_feature_args to be number of feature arguments given.
 // (e.g. if there are 4 '-frame's and 1 '-loop', then num_feature_args = 5).
-static int ValidateCommandLine(int argc, const char* argv[],
+static int ValidateCommandLine(const CommandLineArguments* const cmd_args,
                                int* num_feature_args) {
   int num_frame_args;
   int num_loop_args;
@@ -543,27 +538,27 @@ static int ValidateCommandLine(int argc, const char* argv[],
   *num_feature_args = 0;
 
   // Simple checks.
-  if (CountOccurrences(argv, argc, "-get") > 1) {
+  if (CountOccurrences(cmd_args, "-get") > 1) {
     ERROR_GOTO1("ERROR: Multiple '-get' arguments specified.\n", ErrValidate);
   }
-  if (CountOccurrences(argv, argc, "-set") > 1) {
+  if (CountOccurrences(cmd_args, "-set") > 1) {
     ERROR_GOTO1("ERROR: Multiple '-set' arguments specified.\n", ErrValidate);
   }
-  if (CountOccurrences(argv, argc, "-strip") > 1) {
+  if (CountOccurrences(cmd_args, "-strip") > 1) {
     ERROR_GOTO1("ERROR: Multiple '-strip' arguments specified.\n", ErrValidate);
   }
-  if (CountOccurrences(argv, argc, "-info") > 1) {
+  if (CountOccurrences(cmd_args, "-info") > 1) {
     ERROR_GOTO1("ERROR: Multiple '-info' arguments specified.\n", ErrValidate);
   }
-  if (CountOccurrences(argv, argc, "-o") > 1) {
+  if (CountOccurrences(cmd_args, "-o") > 1) {
     ERROR_GOTO1("ERROR: Multiple output files specified.\n", ErrValidate);
   }
 
   // Compound checks.
-  num_frame_args = CountOccurrences(argv, argc, "-frame");
-  num_loop_args = CountOccurrences(argv, argc, "-loop");
-  num_bgcolor_args = CountOccurrences(argv, argc, "-bgcolor");
-  num_durations_args = CountOccurrences(argv, argc, "-duration");
+  num_frame_args = CountOccurrences(cmd_args, "-frame");
+  num_loop_args = CountOccurrences(cmd_args, "-loop");
+  num_bgcolor_args = CountOccurrences(cmd_args, "-bgcolor");
+  num_durations_args = CountOccurrences(cmd_args, "-duration");
 
   if (num_loop_args > 1) {
     ERROR_GOTO1("ERROR: Multiple loop counts specified.\n", ErrValidate);
@@ -598,7 +593,7 @@ static int ValidateCommandLine(int argc, const char* argv[],
 
 #define ACTION_IS_NIL (config->action_type_ == NIL_ACTION)
 
-#define FEATURETYPE_IS_NIL (feature->type_ == NIL_FEATURE)
+#define FEATURETYPE_IS_NIL (config->type_ == NIL_FEATURE)
 
 #define CHECK_NUM_ARGS_LESS(NUM, LABEL)                                  \
   if (argc < i + (NUM)) {                                                \
@@ -614,15 +609,15 @@ static int ValidateCommandLine(int argc, const char* argv[],
 
 // Parses command-line arguments to fill up config object. Also performs some
 // semantic checks.
-static int ParseCommandLine(int argc, const char* argv[],
-                            WebPMuxConfig* config) {
+static int ParseCommandLine(Config* config) {
   int i = 0;
   int feature_arg_index = 0;
   int ok = 1;
+  int argc = config->cmd_args_.argc_;
+  const char* const* argv = config->cmd_args_.argv_;
 
   while (i < argc) {
-    Feature* const feature = &config->feature_;
-    FeatureArg* const arg = &feature->args_[feature_arg_index];
+    FeatureArg* const arg = &config->args_[feature_arg_index];
     if (argv[i][0] == '-') {  // One of the action types or output.
       if (!strcmp(argv[i], "-set")) {
         if (ACTION_IS_NIL) {
@@ -638,8 +633,8 @@ static int ParseCommandLine(int argc, const char* argv[],
         } else {
           ERROR_GOTO1("ERROR: Multiple actions specified.\n", ErrParse);
         }
-        if (FEATURETYPE_IS_NIL || feature->type_ == FEATURE_DURATION) {
-          feature->type_ = FEATURE_DURATION;
+        if (FEATURETYPE_IS_NIL || config->type_ == FEATURE_DURATION) {
+          config->type_ = FEATURE_DURATION;
         } else {
           ERROR_GOTO1("ERROR: Multiple features specified.\n", ErrParse);
         }
@@ -656,7 +651,7 @@ static int ParseCommandLine(int argc, const char* argv[],
       } else if (!strcmp(argv[i], "-strip")) {
         if (ACTION_IS_NIL) {
           config->action_type_ = ACTION_STRIP;
-          feature->arg_count_ = 0;
+          config->arg_count_ = 0;
         } else {
           ERROR_GOTO1("ERROR: Multiple actions specified.\n", ErrParse);
         }
@@ -668,8 +663,8 @@ static int ParseCommandLine(int argc, const char* argv[],
         } else {
           ERROR_GOTO1("ERROR: Multiple actions specified.\n", ErrParse);
         }
-        if (FEATURETYPE_IS_NIL || feature->type_ == FEATURE_ANMF) {
-          feature->type_ = FEATURE_ANMF;
+        if (FEATURETYPE_IS_NIL || config->type_ == FEATURE_ANMF) {
+          config->type_ = FEATURE_ANMF;
         } else {
           ERROR_GOTO1("ERROR: Multiple features specified.\n", ErrParse);
         }
@@ -685,8 +680,8 @@ static int ParseCommandLine(int argc, const char* argv[],
         } else {
           ERROR_GOTO1("ERROR: Multiple actions specified.\n", ErrParse);
         }
-        if (FEATURETYPE_IS_NIL || feature->type_ == FEATURE_ANMF) {
-          feature->type_ = FEATURE_ANMF;
+        if (FEATURETYPE_IS_NIL || config->type_ == FEATURE_ANMF) {
+          config->type_ = FEATURE_ANMF;
         } else {
           ERROR_GOTO1("ERROR: Multiple features specified.\n", ErrParse);
         }
@@ -705,7 +700,7 @@ static int ParseCommandLine(int argc, const char* argv[],
           ERROR_GOTO1("ERROR: Multiple actions specified.\n", ErrParse);
         } else {
           config->action_type_ = ACTION_INFO;
-          feature->arg_count_ = 0;
+          config->arg_count_ = 0;
           config->input_ = argv[i + 1];
         }
         i += 2;
@@ -741,7 +736,7 @@ static int ParseCommandLine(int argc, const char* argv[],
       if (!strcmp(argv[i], "icc") || !strcmp(argv[i], "exif") ||
           !strcmp(argv[i], "xmp")) {
         if (FEATURETYPE_IS_NIL) {
-          feature->type_ = (!strcmp(argv[i], "icc")) ? FEATURE_ICCP :
+          config->type_ = (!strcmp(argv[i], "icc")) ? FEATURE_ICCP :
               (!strcmp(argv[i], "exif")) ? FEATURE_EXIF : FEATURE_XMP;
         } else {
           ERROR_GOTO1("ERROR: Multiple features specified.\n", ErrParse);
@@ -757,7 +752,7 @@ static int ParseCommandLine(int argc, const char* argv[],
       } else if (!strcmp(argv[i], "frame") &&
                  (config->action_type_ == ACTION_GET)) {
         CHECK_NUM_ARGS_LESS(2, ErrParse);
-        feature->type_ = FEATURE_ANMF;
+        config->type_ = FEATURE_ANMF;
         arg->params_ = argv[i + 1];
         ++feature_arg_index;
         i += 2;
@@ -777,9 +772,8 @@ static int ParseCommandLine(int argc, const char* argv[],
 }
 
 // Additional checks after config is filled.
-static int ValidateConfig(WebPMuxConfig* config) {
+static int ValidateConfig(Config* const config) {
   int ok = 1;
-  Feature* const feature = &config->feature_;
 
   // Action.
   if (ACTION_IS_NIL) {
@@ -795,7 +789,7 @@ static int ValidateConfig(WebPMuxConfig* config) {
   if (config->input_ == NULL) {
     if (config->action_type_ != ACTION_SET) {
       ERROR_GOTO1("ERROR: No input file specified.\n", ErrValidate2);
-    } else if (feature->type_ != FEATURE_ANMF) {
+    } else if (config->type_ != FEATURE_ANMF) {
       ERROR_GOTO1("ERROR: No input file specified.\n", ErrValidate2);
     }
   }
@@ -811,27 +805,28 @@ static int ValidateConfig(WebPMuxConfig* config) {
 
 // Create config object from command-line arguments.
 static int InitializeConfig(int argc, const char* argv[],
-                            WebPMuxConfig* config) {
+                            Config* const config) {
   int num_feature_args = 0;
-  int ok = 1;
+  int ok;
 
-  assert(config != NULL);
   memset(config, 0, sizeof(*config));
 
+  ok = ExUtilInitCommandLineArguments(argc, argv, &config->cmd_args_);
+  if (!ok) return 0;
+
   // Validate command-line arguments.
-  if (!ValidateCommandLine(argc, argv, &num_feature_args)) {
+  if (!ValidateCommandLine(&config->cmd_args_, &num_feature_args)) {
     ERROR_GOTO1("Exiting due to command-line parsing error.\n", Err1);
   }
 
-  config->feature_.arg_count_ = num_feature_args;
-  config->feature_.args_ =
-      (FeatureArg*)calloc(num_feature_args, sizeof(*config->feature_.args_));
-  if (config->feature_.args_ == NULL) {
+  config->arg_count_ = num_feature_args;
+  config->args_ = (FeatureArg*)calloc(num_feature_args, sizeof(*config->args_));
+  if (config->args_ == NULL) {
     ERROR_GOTO1("ERROR: Memory allocation error.\n", Err1);
   }
 
   // Parse command-line.
-  if (!ParseCommandLine(argc, argv, config) || !ValidateConfig(config)) {
+  if (!ParseCommandLine(config) || !ValidateConfig(config)) {
     ERROR_GOTO1("Exiting due to command-line parsing error.\n", Err1);
   }
 
@@ -847,7 +842,7 @@ static int InitializeConfig(int argc, const char* argv[],
 //------------------------------------------------------------------------------
 // Processing.
 
-static int GetFrame(const WebPMux* mux, const WebPMuxConfig* config) {
+static int GetFrame(const WebPMux* mux, const Config* config) {
   WebPMuxError err = WEBP_MUX_OK;
   WebPMux* mux_single = NULL;
   int num = 0;
@@ -857,7 +852,7 @@ static int GetFrame(const WebPMux* mux, const WebPMuxConfig* config) {
   WebPMuxFrameInfo info;
   WebPDataInit(&info.bitstream);
 
-  num = ExUtilGetInt(config->feature_.args_[0].params_, 10, &parse_error);
+  num = ExUtilGetInt(config->args_[0].params_, 10, &parse_error);
   if (num < 0) {
     ERROR_GOTO1("ERROR: Frame/Fragment index must be non-negative.\n", ErrGet);
   }
@@ -891,18 +886,17 @@ static int GetFrame(const WebPMux* mux, const WebPMuxConfig* config) {
 }
 
 // Read and process config.
-static int Process(const WebPMuxConfig* config) {
+static int Process(const Config* config) {
   WebPMux* mux = NULL;
   WebPData chunk;
   WebPMuxError err = WEBP_MUX_OK;
   int ok = 1;
-  const Feature* const feature = &config->feature_;
 
   switch (config->action_type_) {
     case ACTION_GET: {
       ok = CreateMux(config->input_, &mux);
       if (!ok) goto Err2;
-      switch (feature->type_) {
+      switch (config->type_) {
         case FEATURE_ANMF:
           ok = GetFrame(mux, config);
           break;
@@ -910,10 +904,10 @@ static int Process(const WebPMuxConfig* config) {
         case FEATURE_ICCP:
         case FEATURE_EXIF:
         case FEATURE_XMP:
-          err = WebPMuxGetChunk(mux, kFourccList[feature->type_], &chunk);
+          err = WebPMuxGetChunk(mux, kFourccList[config->type_], &chunk);
           if (err != WEBP_MUX_OK) {
             ERROR_GOTO3("ERROR (%s): Could not get the %s.\n",
-                        ErrorString(err), kDescriptions[feature->type_], Err2);
+                        ErrorString(err), kDescriptions[config->type_], Err2);
           }
           ok = WriteData(config->output_, &chunk);
           break;
@@ -925,7 +919,7 @@ static int Process(const WebPMuxConfig* config) {
       break;
     }
     case ACTION_SET: {
-      switch (feature->type_) {
+      switch (config->type_) {
         case FEATURE_ANMF: {
           int i;
           WebPMuxAnimParams params = { 0xFFFFFFFF, 0 };
@@ -934,11 +928,11 @@ static int Process(const WebPMuxConfig* config) {
             ERROR_GOTO2("ERROR (%s): Could not allocate a mux object.\n",
                         ErrorString(WEBP_MUX_MEMORY_ERROR), Err2);
           }
-          for (i = 0; i < feature->arg_count_; ++i) {
-            switch (feature->args_[i].subtype_) {
+          for (i = 0; i < config->arg_count_; ++i) {
+            switch (config->args_[i].subtype_) {
               case SUBTYPE_BGCOLOR: {
                 uint32_t bgcolor;
-                ok = ParseBgcolorArgs(feature->args_[i].params_, &bgcolor);
+                ok = ParseBgcolorArgs(config->args_[i].params_, &bgcolor);
                 if (!ok) {
                   ERROR_GOTO1("ERROR: Could not parse the background color \n",
                               Err2);
@@ -949,7 +943,7 @@ static int Process(const WebPMuxConfig* config) {
               case SUBTYPE_LOOP: {
                 int parse_error = 0;
                 const int loop_count =
-                    ExUtilGetInt(feature->args_[i].params_, 10, &parse_error);
+                    ExUtilGetInt(config->args_[i].params_, 10, &parse_error);
                 if (loop_count < 0 || loop_count > 65535) {
                   // Note: This is only a 'necessary' condition for loop_count
                   // to be valid. The 'sufficient' conditioned in checked in
@@ -965,10 +959,10 @@ static int Process(const WebPMuxConfig* config) {
               case SUBTYPE_ANMF: {
                 WebPMuxFrameInfo frame;
                 frame.id = WEBP_CHUNK_ANMF;
-                ok = ReadFileToWebPData(feature->args_[i].filename_,
-                                        &frame.bitstream);
+                ok = ExUtilReadFileToWebPData(config->args_[i].filename_,
+                                              &frame.bitstream);
                 if (!ok) goto Err2;
-                ok = ParseFrameArgs(feature->args_[i].params_, &frame);
+                ok = ParseFrameArgs(config->args_[i].params_, &frame);
                 if (!ok) {
                   WebPDataClear(&frame.bitstream);
                   ERROR_GOTO1("ERROR: Could not parse frame properties.\n",
@@ -1001,13 +995,13 @@ static int Process(const WebPMuxConfig* config) {
         case FEATURE_XMP: {
           ok = CreateMux(config->input_, &mux);
           if (!ok) goto Err2;
-          ok = ReadFileToWebPData(feature->args_[0].filename_, &chunk);
+          ok = ExUtilReadFileToWebPData(config->args_[0].filename_, &chunk);
           if (!ok) goto Err2;
-          err = WebPMuxSetChunk(mux, kFourccList[feature->type_], &chunk, 1);
+          err = WebPMuxSetChunk(mux, kFourccList[config->type_], &chunk, 1);
           free((void*)chunk.bytes);
           if (err != WEBP_MUX_OK) {
             ERROR_GOTO3("ERROR (%s): Could not set the %s.\n",
-                        ErrorString(err), kDescriptions[feature->type_], Err2);
+                        ErrorString(err), kDescriptions[config->type_], Err2);
           }
           break;
         }
@@ -1043,11 +1037,11 @@ static int Process(const WebPMuxConfig* config) {
         for (i = 0; i < num_frames; ++i) durations[i] = -1;
 
         // Parse intervals to process.
-        for (i = 0; i < feature->arg_count_; ++i) {
+        for (i = 0; i < config->arg_count_; ++i) {
           int k;
           int args[3];
           int duration, start, end;
-          const int nb_args = ExUtilGetInts(feature->args_[i].params_,
+          const int nb_args = ExUtilGetInts(config->args_[i].params_,
                                             10, 3, args);
           ok = (nb_args >= 1);
           if (!ok) goto Err3;
@@ -1105,12 +1099,12 @@ static int Process(const WebPMuxConfig* config) {
     case ACTION_STRIP: {
       ok = CreateMux(config->input_, &mux);
       if (!ok) goto Err2;
-      if (feature->type_ == FEATURE_ICCP || feature->type_ == FEATURE_EXIF ||
-          feature->type_ == FEATURE_XMP) {
-        err = WebPMuxDeleteChunk(mux, kFourccList[feature->type_]);
+      if (config->type_ == FEATURE_ICCP || config->type_ == FEATURE_EXIF ||
+          config->type_ == FEATURE_XMP) {
+        err = WebPMuxDeleteChunk(mux, kFourccList[config->type_]);
         if (err != WEBP_MUX_OK) {
           ERROR_GOTO3("ERROR (%s): Could not strip the %s.\n",
-                      ErrorString(err), kDescriptions[feature->type_], Err2);
+                      ErrorString(err), kDescriptions[config->type_], Err2);
         }
       } else {
         ERROR_GOTO1("ERROR: Invalid feature for action 'strip'.\n", Err2);
@@ -1140,7 +1134,7 @@ static int Process(const WebPMuxConfig* config) {
 // Main.
 
 int main(int argc, const char* argv[]) {
-  WebPMuxConfig config;
+  Config config;
   int ok = InitializeConfig(argc - 1, argv + 1, &config);
   if (ok) {
     ok = Process(&config);

extras/Makefile.am

@@ -1,3 +1,4 @@
+AM_CPPFLAGS += -I$(top_builddir) -I$(top_srcdir)
 AM_CPPFLAGS += -I$(top_builddir)/src -I$(top_srcdir)/src
 noinst_LTLIBRARIES = libwebpextras.la
 
@@ -12,25 +13,32 @@ libwebpextras_la_LDFLAGS = -lm
 libwebpextras_la_LIBADD = ../src/libwebp.la
 
 noinst_PROGRAMS =
-noinst_PROGRAMS += get_disto webp_quality
+noinst_PROGRAMS += webp_quality
+if WANT_DEMUX
+  noinst_PROGRAMS += get_disto
+endif
 if BUILD_VWEBP_SDL
   noinst_PROGRAMS += vwebp_sdl
 endif
 
 get_disto_SOURCES  = get_disto.c
 get_disto_CPPFLAGS = $(AM_CPPFLAGS)
-get_disto_LDADD = ../imageio/libimageio_util.la ../imageio/libimagedec.la
+get_disto_LDADD =
+get_disto_LDADD += ../imageio/libimageio_util.la
+get_disto_LDADD += ../imageio/libimagedec.la
 get_disto_LDADD += ../src/libwebp.la
 get_disto_LDADD += $(PNG_LIBS) $(JPEG_LIBS) $(TIFF_LIBS)
 
 webp_quality_SOURCES  = webp_quality.c
-webp_quality_CPPFLAGS = $(AM_CPPFLAGS) $(USE_EXPERIMENTAL_CODE)
-webp_quality_LDADD  = ../imageio/libimageio_util.la
+webp_quality_CPPFLAGS = $(AM_CPPFLAGS)
+webp_quality_LDADD =
+webp_quality_LDADD += ../imageio/libimageio_util.la
 webp_quality_LDADD += libwebpextras.la
 webp_quality_LDADD += ../src/libwebp.la
 
 vwebp_sdl_SOURCES  = vwebp_sdl.c webp_to_sdl.c webp_to_sdl.h
 vwebp_sdl_CPPFLAGS = $(AM_CPPFLAGS) $(SDL_INCLUDES)
-vwebp_sdl_LDADD = ../imageio/libimageio_util.la
+vwebp_sdl_LDADD =
+vwebp_sdl_LDADD += ../imageio/libimageio_util.la
 vwebp_sdl_LDADD += ../src/libwebp.la
 vwebp_sdl_LDADD += $(SDL_LIBS)

extras/extras.c

@@ -10,7 +10,7 @@
 //  Additional WebP utilities.
 //
 
-#include "./extras.h"
+#include "extras/extras.h"
 #include "webp/format_constants.h"
 
 #include <assert.h>
@@ -18,7 +18,7 @@
 
 #define XTRA_MAJ_VERSION 0
 #define XTRA_MIN_VERSION 1
-#define XTRA_REV_VERSION 0
+#define XTRA_REV_VERSION 1
 
 //------------------------------------------------------------------------------
 

extras/extras.h

@@ -25,28 +25,28 @@ extern "C" {
 
 // Returns the version number of the extras library, packed in hexadecimal using
 // 8bits for each of major/minor/revision. E.g: v2.5.7 is 0x020507.
-WEBP_EXTERN(int) WebPGetExtrasVersion(void);
+WEBP_EXTERN int WebPGetExtrasVersion(void);
 
 //------------------------------------------------------------------------------
 // Ad-hoc colorspace importers.
 
 // Import luma sample (gray scale image) into 'picture'. The 'picture'
 // width and height must be set prior to calling this function.
-WEBP_EXTERN(int) WebPImportGray(const uint8_t* gray, WebPPicture* picture);
+WEBP_EXTERN int WebPImportGray(const uint8_t* gray, WebPPicture* picture);
 
 // Import rgb sample in RGB565 packed format into 'picture'. The 'picture'
 // width and height must be set prior to calling this function.
-WEBP_EXTERN(int) WebPImportRGB565(const uint8_t* rgb565, WebPPicture* pic);
+WEBP_EXTERN int WebPImportRGB565(const uint8_t* rgb565, WebPPicture* pic);
 
 // Import rgb sample in RGB4444 packed format into 'picture'. The 'picture'
 // width and height must be set prior to calling this function.
-WEBP_EXTERN(int) WebPImportRGB4444(const uint8_t* rgb4444, WebPPicture* pic);
+WEBP_EXTERN int WebPImportRGB4444(const uint8_t* rgb4444, WebPPicture* pic);
 
 // Import a color mapped image. The number of colors is less or equal to
 // MAX_PALETTE_SIZE. 'pic' must have been initialized. Its content, if any,
 // will be discarded. Returns 'false' in case of error, or if indexed[] contains
 // invalid indices.
-WEBP_EXTERN(int)
+WEBP_EXTERN int
 WebPImportColorMappedARGB(const uint8_t* indexed, int indexed_stride,
                           const uint32_t palette[], int palette_size,
                           WebPPicture* pic);
@@ -59,7 +59,7 @@ WebPImportColorMappedARGB(const uint8_t* indexed, int indexed_stride,
 // Otherwise (lossy bitstream), the returned value is in the range [0..100].
 // Any error (invalid bitstream, animated WebP, incomplete header, etc.)
 // will return a value of -1.
-WEBP_EXTERN(int) VP8EstimateQuality(const uint8_t* const data, size_t size);
+WEBP_EXTERN int VP8EstimateQuality(const uint8_t* const data, size_t size);
 
 //------------------------------------------------------------------------------
 

extras/get_disto.c

@@ -24,8 +24,8 @@
 #include <string.h>
 
 #include "webp/encode.h"
-#include "../imageio/image_dec.h"
-#include "../imageio/imageio_util.h"
+#include "imageio/image_dec.h"
+#include "imageio/imageio_util.h"
 
 static size_t ReadPicture(const char* const filename, WebPPicture* const pic,
                           int keep_alpha) {
@@ -290,9 +290,10 @@ int main(int argc, const char *argv[]) {
     fprintf(stderr, "Error while computing the distortion.\n");
     goto End;
   }
-  printf("%u %.2f    %.2f %.2f %.2f %.2f\n",
+  printf("%u %.2f    %.2f %.2f %.2f %.2f [ %.2f bpp ]\n",
          (unsigned int)size1,
-         disto[4], disto[0], disto[1], disto[2], disto[3]);
+         disto[4], disto[0], disto[1], disto[2], disto[3],
+         8.f * size1 / pic1.width / pic1.height);
 
   if (output != NULL) {
     uint8_t* data = NULL;
@@ -322,6 +323,7 @@ int main(int argc, const char *argv[]) {
       fprintf(stderr, "Can only compute the difference map in ARGB format.\n");
       goto End;
     }
+#if !defined(WEBP_REDUCE_CSP)
     data_size = WebPEncodeLosslessBGRA((const uint8_t*)pic1.argb,
                                        pic1.width, pic1.height,
                                        pic1.argb_stride * 4,
@@ -333,6 +335,12 @@ int main(int argc, const char *argv[]) {
     ret = ImgIoUtilWriteFile(output, data, data_size) ? 0 : 1;
     WebPFree(data);
     if (ret) goto End;
+#else
+    (void)data;
+    (void)data_size;
+    fprintf(stderr, "Cannot save the difference map. Please recompile "
+                    "without the WEBP_REDUCE_CSP flag.\n");
+#endif  // WEBP_REDUCE_CSP
   }
   ret = 0;
 

extras/quality_estimate.c

@@ -11,7 +11,7 @@
 //
 // Author: Skal (pascal.massimino@gmail.com)
 
-#include "./extras.h"
+#include "extras/extras.h"
 #include "webp/decode.h"
 
 #include <math.h>
@@ -73,7 +73,7 @@ int VP8EstimateQuality(const uint8_t* const data, size_t size) {
   pos += 4;
   bit_pos = pos * 8;
 
-  GET_BIT(2);  // color_space + clamp type
+  GET_BIT(2);  // colorspace + clamp type
 
   // Segment header
   if (GET_BIT(1)) {       // use_segment_

extras/vwebp_sdl.c

@@ -24,7 +24,7 @@
 
 #include "webp_to_sdl.h"
 #include "webp/decode.h"
-#include "../imageio/imageio_util.h"
+#include "imageio/imageio_util.h"
 
 #if defined(WEBP_HAVE_JUST_SDL_H)
 #include <SDL.h>

extras/webp_quality.c

@@ -11,8 +11,8 @@
 #include <stdlib.h>
 #include <string.h>
 
-#include "./extras.h"
-#include "../imageio/imageio_util.h"
+#include "extras/extras.h"
+#include "imageio/imageio_util.h"
 
 int main(int argc, const char *argv[]) {
   int c;

extras/webp_to_sdl.c

@@ -12,7 +12,7 @@
 // Author: James Zern (jzern@google.com)
 
 #ifdef HAVE_CONFIG_H
-#include "webp/config.h"
+#include "src/webp/config.h"
 #endif
 
 #if defined(WEBP_HAVE_SDL)
@@ -20,7 +20,7 @@
 #include "webp_to_sdl.h"
 
 #include <stdio.h>
-#include "webp/decode.h"
+#include "src/webp/decode.h"
 
 #if defined(WEBP_HAVE_JUST_SDL_H)
 #include <SDL.h>
@@ -28,6 +28,7 @@
 #include <SDL/SDL.h>
 #endif
 
+static int init_ok = 0;
 int WebpToSDL(const char* data, unsigned int data_size) {
   int ok = 0;
   VP8StatusCode status;
@@ -42,7 +43,10 @@ int WebpToSDL(const char* data, unsigned int data_size) {
     return 1;
   }
 
-  SDL_Init(SDL_INIT_VIDEO);
+  if (!init_ok) {
+    SDL_Init(SDL_INIT_VIDEO);
+    init_ok = 1;
+  }
 
   status = WebPGetFeatures((uint8_t*)data, (size_t)data_size, &config.input);
   if (status != VP8_STATUS_OK) goto Error;
@@ -97,6 +101,7 @@ int WebpToSDL(const char* data, unsigned int data_size) {
  Error:
   SDL_FreeSurface(surface);
   SDL_FreeSurface(screen);
+  WebPFreeDecBuffer(output);
   return ok;
 }
 

imageio/Makefile.am

@@ -1,13 +1,20 @@
 AM_CPPFLAGS += -I$(top_builddir)/src -I$(top_srcdir)/src
-noinst_LTLIBRARIES = libimageio_util.la libimagedec.la libimageenc.la
+noinst_LTLIBRARIES =
+noinst_LTLIBRARIES += libimageio_util.la
+if WANT_DEMUX
+  noinst_LTLIBRARIES += libimagedec.la
+endif
+noinst_LTLIBRARIES += libimageenc.la
 
 noinst_HEADERS =
 noinst_HEADERS += ../src/webp/decode.h
 noinst_HEADERS += ../src/webp/types.h
 
-libimageio_util_la_SOURCES = imageio_util.c imageio_util.h
+libimageio_util_la_SOURCES =
+libimageio_util_la_SOURCES += imageio_util.c imageio_util.h
 
-libimagedec_la_SOURCES  = image_dec.c image_dec.h
+libimagedec_la_SOURCES  =
+libimagedec_la_SOURCES += image_dec.c image_dec.h
 libimagedec_la_SOURCES += jpegdec.c jpegdec.h
 libimagedec_la_SOURCES += metadata.c metadata.h
 libimagedec_la_SOURCES += pngdec.c pngdec.h
@@ -16,8 +23,10 @@ libimagedec_la_SOURCES += tiffdec.c tiffdec.h
 libimagedec_la_SOURCES += webpdec.c webpdec.h
 libimagedec_la_SOURCES += wicdec.c wicdec.h
 libimagedec_la_CPPFLAGS = $(JPEG_INCLUDES) $(PNG_INCLUDES) $(TIFF_INCLUDES)
-libimagedec_la_CPPFLAGS += $(AM_CPPFLAGS) $(USE_EXPERIMENTAL_CODE)
+libimagedec_la_CPPFLAGS += $(AM_CPPFLAGS)
+libimagedec_la_LIBADD = ../src/demux/libwebpdemux.la
 
-libimageenc_la_SOURCES  = image_enc.c image_enc.h
+libimageenc_la_SOURCES  =
+libimageenc_la_SOURCES += image_enc.c image_enc.h
 libimageenc_la_CPPFLAGS = $(JPEG_INCLUDES) $(PNG_INCLUDES) $(TIFF_INCLUDES)
-libimageenc_la_CPPFLAGS += $(AM_CPPFLAGS) $(USE_EXPERIMENTAL_CODE)
+libimageenc_la_CPPFLAGS += $(AM_CPPFLAGS)

imageio/image_enc.c

@@ -158,14 +158,8 @@ static void PNGAPI PNGErrorFunction(png_structp png, png_const_charp dummy) {
 }
 
 int WebPWritePNG(FILE* out_file, const WebPDecBuffer* const buffer) {
-  const uint32_t width = buffer->width;
-  const uint32_t height = buffer->height;
-  png_bytep row = buffer->u.RGBA.rgba;
-  const int stride = buffer->u.RGBA.stride;
-  const int has_alpha = WebPIsAlphaMode(buffer->colorspace);
   volatile png_structp png;
   volatile png_infop info;
-  png_uint_32 y;
 
   if (out_file == NULL || buffer == NULL) return 0;
 
@@ -184,14 +178,23 @@ int WebPWritePNG(FILE* out_file, const WebPDecBuffer* const buffer) {
     return 0;
   }
   png_init_io(png, out_file);
-  png_set_IHDR(png, info, width, height, 8,
-               has_alpha ? PNG_COLOR_TYPE_RGBA : PNG_COLOR_TYPE_RGB,
-               PNG_INTERLACE_NONE, PNG_COMPRESSION_TYPE_DEFAULT,
-               PNG_FILTER_TYPE_DEFAULT);
-  png_write_info(png, info);
-  for (y = 0; y < height; ++y) {
-    png_write_rows(png, &row, 1);
-    row += stride;
+  {
+    const uint32_t width = buffer->width;
+    const uint32_t height = buffer->height;
+    png_bytep row = buffer->u.RGBA.rgba;
+    const int stride = buffer->u.RGBA.stride;
+    const int has_alpha = WebPIsAlphaMode(buffer->colorspace);
+    uint32_t y;
+
+    png_set_IHDR(png, info, width, height, 8,
+                 has_alpha ? PNG_COLOR_TYPE_RGBA : PNG_COLOR_TYPE_RGB,
+                 PNG_INTERLACE_NONE, PNG_COMPRESSION_TYPE_DEFAULT,
+                 PNG_FILTER_TYPE_DEFAULT);
+    png_write_info(png, info);
+    for (y = 0; y < height; ++y) {
+      png_write_rows(png, &row, 1);
+      row += stride;
+    }
   }
   png_write_end(png, info);
   png_destroy_write_struct((png_structpp)&png, (png_infopp)&info);
@@ -542,22 +545,24 @@ int WebPWriteYUV(FILE* fout, const WebPDecBuffer* const buffer) {
 // Generic top-level call
 
 int WebPSaveImage(const WebPDecBuffer* const buffer,
-                  WebPOutputFileFormat format, const char* const out_file) {
+                  WebPOutputFileFormat format,
+                  const char* const out_file_name) {
   FILE* fout = NULL;
   int needs_open_file = 1;
-  const int use_stdout = (out_file != NULL) && !strcmp(out_file, "-");
+  const int use_stdout = (out_file_name != NULL) && !strcmp(out_file_name, "-");
   int ok = 1;
 
-  if (buffer == NULL || out_file == NULL) return 0;
+  if (buffer == NULL || out_file_name == NULL) return 0;
 
 #ifdef HAVE_WINCODEC_H
   needs_open_file = (format != PNG);
 #endif
 
   if (needs_open_file) {
-    fout = use_stdout ? ImgIoUtilSetBinaryMode(stdout) : fopen(out_file, "wb");
+    fout = use_stdout ? ImgIoUtilSetBinaryMode(stdout)
+                      : fopen(out_file_name, "wb");
     if (fout == NULL) {
-      fprintf(stderr, "Error opening output file %s\n", out_file);
+      fprintf(stderr, "Error opening output file %s\n", out_file_name);
       return 0;
     }
   }
@@ -566,7 +571,7 @@ int WebPSaveImage(const WebPDecBuffer* const buffer,
       format == RGBA || format == BGRA || format == ARGB ||
       format == rgbA || format == bgrA || format == Argb) {
 #ifdef HAVE_WINCODEC_H
-    ok &= WebPWritePNG(out_file, use_stdout, buffer);
+    ok &= WebPWritePNG(out_file_name, use_stdout, buffer);
 #else
     ok &= WebPWritePNG(fout, buffer);
 #endif

imageio/imageio_util.c

@@ -47,7 +47,8 @@ int ImgIoUtilReadFromStdin(const uint8_t** data, size_t* data_size) {
   while (!feof(stdin)) {
     // We double the buffer size each time and read as much as possible.
     const size_t extra_size = (max_size == 0) ? kBlockSize : max_size;
-    void* const new_data = realloc(input, max_size + extra_size);
+    // we allocate one extra byte for the \0 terminator
+    void* const new_data = realloc(input, max_size + extra_size + 1);
     if (new_data == NULL) goto Error;
     input = (uint8_t*)new_data;
     max_size += extra_size;
@@ -55,6 +56,7 @@ int ImgIoUtilReadFromStdin(const uint8_t** data, size_t* data_size) {
     if (size < max_size) break;
   }
   if (ferror(stdin)) goto Error;
+  if (input != NULL) input[size] = '\0';  // convenient 0-terminator
   *data = input;
   *data_size = size;
   return 1;
@@ -68,7 +70,7 @@ int ImgIoUtilReadFromStdin(const uint8_t** data, size_t* data_size) {
 int ImgIoUtilReadFile(const char* const file_name,
                       const uint8_t** data, size_t* data_size) {
   int ok;
-  void* file_data;
+  uint8_t* file_data;
   size_t file_size;
   FILE* in;
   const int from_stdin = (file_name == NULL) || !strcmp(file_name, "-");
@@ -87,8 +89,14 @@ int ImgIoUtilReadFile(const char* const file_name,
   fseek(in, 0, SEEK_END);
   file_size = ftell(in);
   fseek(in, 0, SEEK_SET);
-  file_data = malloc(file_size);
-  if (file_data == NULL) return 0;
+  // we allocate one extra byte for the \0 terminator
+  file_data = (uint8_t*)malloc(file_size + 1);
+  if (file_data == NULL) {
+    fclose(in);
+    fprintf(stderr, "memory allocation failure when reading file %s\n",
+            file_name);
+    return 0;
+  }
   ok = (fread(file_data, file_size, 1, in) == 1);
   fclose(in);
 
@@ -98,11 +106,14 @@ int ImgIoUtilReadFile(const char* const file_name,
     free(file_data);
     return 0;
   }
-  *data = (uint8_t*)file_data;
+  file_data[file_size] = '\0';  // convenient 0-terminator
+  *data = file_data;
   *data_size = file_size;
   return 1;
 }
 
+// -----------------------------------------------------------------------------
+
 int ImgIoUtilWriteFile(const char* const file_name,
                        const uint8_t* data, size_t data_size) {
   int ok;
@@ -137,7 +148,11 @@ void ImgIoUtilCopyPlane(const uint8_t* src, int src_stride,
 
 int ImgIoUtilCheckSizeArgumentsOverflow(uint64_t nmemb, size_t size) {
   const uint64_t total_size = nmemb * size;
-  return (total_size == (size_t)total_size);
+  int ok = (total_size == (size_t)total_size);
+#if defined(WEBP_MAX_IMAGE_SIZE)
+  ok = ok && (total_size <= (uint64_t)WEBP_MAX_IMAGE_SIZE);
+#endif
+  return ok;
 }
 
 // -----------------------------------------------------------------------------

imageio/imageio_util.h

@@ -30,6 +30,9 @@ FILE* ImgIoUtilSetBinaryMode(FILE* file);
 // Allocates storage for entire file 'file_name' and returns contents and size
 // in 'data' and 'data_size'. Returns 1 on success, 0 otherwise. '*data' should
 // be deleted using free().
+// Note: for convenience, the data will be null-terminated with an extra byte
+// (not accounted for in *data_size), in case the file is text and intended
+// to be used as a C-string.
 // If 'file_name' is NULL or equal to "-", input is read from stdin by calling
 // the function ImgIoUtilReadFromStdin().
 int ImgIoUtilReadFile(const char* const file_name,

imageio/jpegdec.c

@@ -304,18 +304,18 @@ int ReadJPEG(const uint8_t* const data, size_t data_size,
 
   if (stride != (int)stride ||
       !ImgIoUtilCheckSizeArgumentsOverflow(stride, height)) {
-    goto End;
+    goto Error;
   }
 
   rgb = (uint8_t*)malloc((size_t)stride * height);
   if (rgb == NULL) {
-    goto End;
+    goto Error;
   }
   buffer[0] = (JSAMPLE*)rgb;
 
   while (dinfo.output_scanline < dinfo.output_height) {
     if (jpeg_read_scanlines((j_decompress_ptr)&dinfo, buffer, 1) != 1) {
-      goto End;
+      goto Error;
     }
     buffer[0] += stride;
   }

imageio/pngdec.c

@@ -185,7 +185,6 @@ static int ExtractMetadataFromPNG(png_structp png,
       }
     }
   }
-
   return 1;
 }
 
@@ -265,6 +264,16 @@ int ReadPNG(const uint8_t* const data, size_t data_size,
     has_alpha = !!(color_type & PNG_COLOR_MASK_ALPHA);
   }
 
+  // Apply gamma correction if needed.
+  {
+    double image_gamma = 1 / 2.2, screen_gamma = 2.2;
+    int srgb_intent;
+    if (png_get_sRGB(png, info, &srgb_intent) ||
+        png_get_gAMA(png, info, &image_gamma)) {
+      png_set_gamma(png, screen_gamma, image_gamma);
+    }
+  }
+
   if (!keep_alpha) {
     png_set_strip_alpha(png);
     has_alpha = 0;

imageio/pnmdec.c

@@ -117,8 +117,13 @@ static size_t ReadPAMFields(PNMInfo* const info, size_t off) {
     }
   }
   if (!(info->seen_flags & TUPLE_FLAG)) {
-    info->seen_flags |= TUPLE_FLAG;
-    info->bytes_per_px = info->depth * (info->max_value > 255 ? 2 : 1);
+    if (info->depth > 0 && info->depth <= 4 && info->depth != 2) {
+      info->seen_flags |= TUPLE_FLAG;
+      info->bytes_per_px = info->depth * (info->max_value > 255 ? 2 : 1);
+    } else {
+      fprintf(stderr, "PAM: invalid bitdepth (%d).\n", info->depth);
+      return 0;
+    }
   }
   if (info->seen_flags != ALL_NEEDED_FLAGS) {
     fprintf(stderr, "PAM: incomplete header.\n");
@@ -160,7 +165,7 @@ static size_t ReadHeader(PNMInfo* const info) {
   // perform some basic numerical validation
   if (info->width <= 0 || info->height <= 0 ||
       info->type <= 0 || info->type >= 9 ||
-      info->depth <= 0 || info->depth > 4 ||
+      info->depth <= 0 || info->depth == 2 || info->depth > 4 ||
       info->bytes_per_px < info->depth ||
       info->max_value <= 0 || info->max_value >= 65536) {
     return 0;

imageio/webpdec.c

@@ -9,12 +9,18 @@
 //
 // WebP decode.
 
+#ifdef HAVE_CONFIG_H
+#include "webp/config.h"
+#endif
+
 #include "./webpdec.h"
 
+#include <assert.h>
 #include <stdio.h>
 #include <stdlib.h>
 
 #include "webp/decode.h"
+#include "webp/demux.h"
 #include "webp/encode.h"
 #include "./imageio_util.h"
 #include "./metadata.h"
@@ -91,25 +97,47 @@ VP8StatusCode DecodeWebPIncremental(
       fprintf(stderr, "Failed during WebPINewDecoder().\n");
       return VP8_STATUS_OUT_OF_MEMORY;
     } else {
-#ifdef WEBP_EXPERIMENTAL_FEATURES
-      size_t size = 0;
-      const size_t incr = 2 + (data_size / 20);
-      while (size < data_size) {
-        size_t next_size = size + (rand() % incr);
-        if (next_size > data_size) next_size = data_size;
-        status = WebPIUpdate(idec, data, next_size);
-        if (status != VP8_STATUS_OK && status != VP8_STATUS_SUSPENDED) break;
-        size = next_size;
-      }
-#else
       status = WebPIUpdate(idec, data, data_size);
-#endif
       WebPIDelete(idec);
     }
   }
   return status;
 }
 
+// -----------------------------------------------------------------------------
+// Metadata
+
+static int ExtractMetadata(const uint8_t* const data, size_t data_size,
+                           Metadata* const metadata) {
+  WebPData webp_data = { data, data_size };
+  WebPDemuxer* const demux = WebPDemux(&webp_data);
+  WebPChunkIterator chunk_iter;
+  uint32_t flags;
+
+  if (demux == NULL) return 0;
+  assert(metadata != NULL);
+
+  flags = WebPDemuxGetI(demux, WEBP_FF_FORMAT_FLAGS);
+
+  if ((flags & ICCP_FLAG) && WebPDemuxGetChunk(demux, "ICCP", 1, &chunk_iter)) {
+    MetadataCopy((const char*)chunk_iter.chunk.bytes, chunk_iter.chunk.size,
+                 &metadata->iccp);
+    WebPDemuxReleaseChunkIterator(&chunk_iter);
+  }
+  if ((flags & EXIF_FLAG) && WebPDemuxGetChunk(demux, "EXIF", 1, &chunk_iter)) {
+    MetadataCopy((const char*)chunk_iter.chunk.bytes, chunk_iter.chunk.size,
+                 &metadata->exif);
+    WebPDemuxReleaseChunkIterator(&chunk_iter);
+  }
+  if ((flags & XMP_FLAG) && WebPDemuxGetChunk(demux, "XMP ", 1, &chunk_iter)) {
+    MetadataCopy((const char*)chunk_iter.chunk.bytes, chunk_iter.chunk.size,
+                 &metadata->xmp);
+    WebPDemuxReleaseChunkIterator(&chunk_iter);
+  }
+  WebPDemuxDelete(demux);
+  return 1;
+}
+
 // -----------------------------------------------------------------------------
 
 int ReadWebP(const uint8_t* const data, size_t data_size,
@@ -123,11 +151,6 @@ int ReadWebP(const uint8_t* const data, size_t data_size,
 
   if (data == NULL || data_size == 0 || pic == NULL) return 0;
 
-  // TODO(jzern): add Exif/XMP/ICC extraction.
-  if (metadata != NULL) {
-    fprintf(stderr, "Warning: metadata extraction from WebP is unsupported.\n");
-  }
-
   if (!WebPInitDecoderConfig(&config)) {
     fprintf(stderr, "Library version mismatch!\n");
     return 0;
@@ -141,17 +164,32 @@ int ReadWebP(const uint8_t* const data, size_t data_size,
 
   do {
     const int has_alpha = keep_alpha && bitstream->has_alpha;
+    uint64_t stride;
     pic->width = bitstream->width;
     pic->height = bitstream->height;
-    if (!pic->use_argb) pic->colorspace = has_alpha ? WEBP_YUV420A
-                                                    : WEBP_YUV420;
+    if (pic->use_argb) {
+      stride = (uint64_t)bitstream->width * 4;
+    } else {
+      stride = (uint64_t)bitstream->width * (has_alpha ? 5 : 3) / 2;
+      pic->colorspace = has_alpha ? WEBP_YUV420A : WEBP_YUV420;
+    }
+
+    if (!ImgIoUtilCheckSizeArgumentsOverflow(stride, bitstream->height)) {
+      status = VP8_STATUS_OUT_OF_MEMORY;
+      break;
+    }
+
     ok = WebPPictureAlloc(pic);
     if (!ok) {
       status = VP8_STATUS_OUT_OF_MEMORY;
       break;
     }
     if (pic->use_argb) {
+#ifdef WORDS_BIGENDIAN
+      output_buffer->colorspace = MODE_ARGB;
+#else
       output_buffer->colorspace = MODE_BGRA;
+#endif
       output_buffer->u.RGBA.rgba = (uint8_t*)pic->argb;
       output_buffer->u.RGBA.stride = pic->argb_stride * sizeof(uint32_t);
       output_buffer->u.RGBA.size = output_buffer->u.RGBA.stride * pic->height;
@@ -174,7 +212,6 @@ int ReadWebP(const uint8_t* const data, size_t data_size,
 
     status = DecodeWebP(data, data_size, &config);
     ok = (status == VP8_STATUS_OK);
-    if (!ok) WebPPictureFree(pic);
     if (ok && !keep_alpha && pic->use_argb) {
       // Need to wipe out the alpha value, as requested.
       int x, y;
@@ -188,9 +225,18 @@ int ReadWebP(const uint8_t* const data, size_t data_size,
 
   if (status != VP8_STATUS_OK) {
     PrintWebPError("input data", status);
+    ok = 0;
   }
 
   WebPFreeDecBuffer(output_buffer);
+
+  if (ok && metadata != NULL) {
+    ok = ExtractMetadata(data, data_size, metadata);
+    if (!ok) {
+      PrintWebPError("metadata", VP8_STATUS_BITSTREAM_ERROR);
+    }
+  }
+  if (!ok) WebPPictureFree(pic);
   return ok;
 }
 

makefile.unix

@@ -25,6 +25,7 @@ ifeq ($(strip $(shell uname)), Darwin)
   # Failure observed with: gcc 4.2.1 and 4.0.1.
   EXTRA_FLAGS += -fno-common
   EXTRA_FLAGS += -DHAVE_GLUT_GLUT_H
+  EXTRA_FLAGS += -Wno-deprecated-declarations
   EXTRA_FLAGS += -I/opt/local/include
   EXTRA_LIBS  += -L/opt/local/lib
   GL_LIBS = -framework GLUT -framework OpenGL
@@ -34,6 +35,16 @@ else
   GL_LIBS = -lglut -lGL
 endif
 
+# SDL flags: use sdl-config if it exists
+SDL_CONFIG = $(shell sdl-config --version 2> /dev/null)
+ifneq ($(SDL_CONFIG),)
+  SDL_LIBS = $(shell sdl-config --libs)
+  SDL_FLAGS = $(shell sdl-config --cflags)
+else
+  # use best-guess
+  SDL_LIBS = -lSDL
+  SDL_FLAGS =
+endif
 
 # To install libraries on Mac OS X:
 # 1. Install MacPorts (http://www.macports.org/install.php)
@@ -53,11 +64,8 @@ endif
 # 'make -f makefile.unix EXTRA_FLAGS=-m32' to that effect.
 # EXTRA_FLAGS += -m32
 
-# Extra flags to enable experimental features and code
-# EXTRA_FLAGS += -DWEBP_EXPERIMENTAL_FEATURES
-
 # Extra flags to enable byte swap for 16 bit colorspaces.
-# EXTRA_FLAGS += -DWEBP_SWAP_16BIT_CSP
+# EXTRA_FLAGS += -DWEBP_SWAP_16BIT_CSP=1
 
 # Extra flags to enable multi-threading
 EXTRA_FLAGS += -DWEBP_USE_THREAD
@@ -103,7 +111,7 @@ endif
 
 AR = ar
 ARFLAGS = r
-CPPFLAGS = -Isrc/ -Wall
+CPPFLAGS = -I. -Isrc/ -Wall
 CFLAGS = -O3 -DNDEBUG $(EXTRA_FLAGS)
 CC = gcc
 INSTALL = install
@@ -166,16 +174,15 @@ DSP_DEC_OBJS = \
     src/dsp/upsampling_msa.o \
     src/dsp/upsampling_neon.o \
     src/dsp/upsampling_sse2.o \
+    src/dsp/upsampling_sse41.o \
     src/dsp/yuv.o \
     src/dsp/yuv_mips32.o \
     src/dsp/yuv_mips_dsp_r2.o \
     src/dsp/yuv_neon.o \
     src/dsp/yuv_sse2.o \
+    src/dsp/yuv_sse41.o \
 
 DSP_ENC_OBJS = \
-    src/dsp/argb.o \
-    src/dsp/argb_mips_dsp_r2.o \
-    src/dsp/argb_sse2.o \
     src/dsp/cost.o \
     src/dsp/cost_mips32.o \
     src/dsp/cost_mips_dsp_r2.o \
@@ -205,7 +212,6 @@ ENC_OBJS = \
     src/enc/backward_references_enc.o \
     src/enc/config_enc.o \
     src/enc/cost_enc.o \
-    src/enc/delta_palettization_enc.o \
     src/enc/filter_enc.o \
     src/enc/frame_enc.o \
     src/enc/histogram_enc.o \
@@ -303,7 +309,6 @@ HDRS = \
     src/dsp/yuv.h \
     src/enc/backward_references_enc.h \
     src/enc/cost_enc.h \
-    src/enc/delta_palettization_enc.h \
     src/enc/histogram_enc.h \
     src/enc/vp8i_enc.h \
     src/enc/vp8li_enc.h \
@@ -335,7 +340,8 @@ OUT_LIBS += src/libwebp.a
 EXTRA_LIB = extras/libwebpextras.a
 OUT_EXAMPLES = examples/cwebp examples/dwebp
 EXTRA_EXAMPLES = examples/gif2webp examples/vwebp examples/webpmux \
-                 examples/anim_diff examples/img2webp examples/webpinfo
+                 examples/anim_diff examples/anim_dump \
+                 examples/img2webp examples/webpinfo
 OTHER_EXAMPLES = extras/get_disto extras/webp_quality extras/vwebp_sdl
 
 OUTPUT = $(OUT_LIBS) $(OUT_EXAMPLES)
@@ -363,7 +369,7 @@ src/utils/bit_reader_utils.o: src/utils/endian_inl_utils.h
 src/utils/bit_writer_utils.o: src/utils/endian_inl_utils.h
 
 %.o: %.c $(HDRS)
-	$(CC) $(CFLAGS) $(CPPFLAGS) -c $< -o $@
+	$(CC) $(CPPFLAGS) $(CFLAGS) -c $< -o $@
 
 examples/libanim_util.a: $(ANIM_UTIL_OBJS)
 examples/libexample_util.a: $(EX_UTIL_OBJS)
@@ -381,6 +387,7 @@ src/demux/libwebpdemux.a: $(LIBWEBPDEMUX_OBJS)
 	$(AR) $(ARFLAGS) $@ $^
 
 examples/anim_diff: examples/anim_diff.o $(ANIM_UTIL_OBJS) $(GIFDEC_OBJS)
+examples/anim_dump: examples/anim_dump.o $(ANIM_UTIL_OBJS)
 examples/cwebp: examples/cwebp.o
 examples/dwebp: examples/dwebp.o
 examples/gif2webp: examples/gif2webp.o $(GIFDEC_OBJS)
@@ -394,13 +401,22 @@ examples/anim_diff: src/demux/libwebpdemux.a examples/libexample_util.a
 examples/anim_diff: imageio/libimageio_util.a src/libwebp.a
 examples/anim_diff: EXTRA_LIBS += $(GIF_LIBS)
 examples/anim_diff: EXTRA_FLAGS += -DWEBP_HAVE_GIF
+examples/anim_dump: examples/libanim_util.a
+examples/anim_dump: src/demux/libwebpdemux.a
+examples/anim_dump: examples/libexample_util.a
+examples/anim_dump: imageio/libimageio_util.a
+examples/anim_dump: imageio/libimageenc.a
+examples/anim_dump: src/libwebp.a
+examples/anim_dump: EXTRA_LIBS += $(GIF_LIBS) $(DWEBP_LIBS)
 examples/cwebp: examples/libexample_util.a
 examples/cwebp: imageio/libimagedec.a
+examples/cwebp: src/demux/libwebpdemux.a
 examples/cwebp: imageio/libimageio_util.a
 examples/cwebp: src/libwebp.a
 examples/cwebp: EXTRA_LIBS += $(CWEBP_LIBS)
 examples/dwebp: examples/libexample_util.a
 examples/dwebp: imageio/libimagedec.a
+examples/dwebp: src/demux/libwebpdemux.a
 examples/dwebp: imageio/libimageenc.a
 examples/dwebp: imageio/libimageio_util.a
 examples/dwebp: src/libwebp.a
@@ -417,13 +433,17 @@ examples/webpmux: examples/libexample_util.a imageio/libimageio_util.a
 examples/webpmux: src/mux/libwebpmux.a src/libwebpdecoder.a
 examples/img2webp: examples/libexample_util.a imageio/libimageio_util.a
 examples/img2webp: imageio/libimagedec.a
+examples/img2webp: src/demux/libwebpdemux.a
 examples/img2webp: src/mux/libwebpmux.a src/libwebp.a
 examples/img2webp: EXTRA_LIBS += $(CWEBP_LIBS)
 examples/webpinfo: examples/libexample_util.a imageio/libimageio_util.a
 examples/webpinfo: src/libwebpdecoder.a
 
 extras/get_disto: extras/get_disto.o
-extras/get_disto: imageio/libimagedec.a imageio/libimageio_util.a src/libwebp.a
+extras/get_disto: imageio/libimagedec.a
+extras/get_disto: src/demux/libwebpdemux.a
+extras/get_disto: imageio/libimageio_util.a
+extras/get_disto: src/libwebp.a
 extras/get_disto: EXTRA_LIBS += $(CWEBP_LIBS)
 
 extras/webp_quality: extras/webp_quality.o
@@ -434,8 +454,8 @@ extras/vwebp_sdl: extras/vwebp_sdl.o
 extras/vwebp_sdl: extras/webp_to_sdl.o
 extras/vwebp_sdl: imageio/libimageio_util.a
 extras/vwebp_sdl: src/libwebp.a
-extras/vwebp_sdl: EXTRA_FLAGS += -DWEBP_HAVE_SDL
-extras/vwebp_sdl: EXTRA_LIBS += -lSDL
+extras/vwebp_sdl: EXTRA_FLAGS += -DWEBP_HAVE_SDL $(SDL_FLAGS)
+extras/vwebp_sdl: EXTRA_LIBS += $(SDL_LIBS)
 
 $(OUT_EXAMPLES) $(EXTRA_EXAMPLES) $(OTHER_EXAMPLES):
 	$(CC) -o $@ $^ $(LDFLAGS)

man/gif2webp.1

@@ -1,5 +1,5 @@
 .\"                                      Hey, EMACS: -*- nroff -*-
-.TH GIF2WEBP 1 "January 25, 2017"
+.TH GIF2WEBP 1 "January 25, 2018"
 .SH NAME
 gif2webp \- Convert a GIF image to WebP
 .SH SYNOPSIS
@@ -20,6 +20,12 @@ Specify the name of the output WebP file. If omitted, \fBgif2webp\fP will
 perform conversion but only report statistics.
 Using "\-" as output name will direct output to 'stdout'.
 .TP
+.BI \-\- " string
+Explicitly specify the input file. This option is useful if the input
+file starts with an '\-' for instance. This option must appear \fBlast\fP.
+Any other options afterward will be ignored. If the input file is "\-",
+the data will be read from \fIstdin\fP instead of a file.
+.TP
 .B \-h, \-help
 Usage information.
 .TP
@@ -110,6 +116,10 @@ the range of 20 to 50.
 .B \-mt
 Use multi-threading for encoding, if possible.
 .TP
+.B \-loop_compatibility
+If enabled, handle the loop information in a compatible fashion for Chrome
+version prior to M62 (inclusive) and Firefox.
+.TP
 .B \-v
 Print extra information.
 .TP
@@ -133,6 +143,8 @@ gif2webp \-lossy \-m 3 picture.gif \-o picture_lossy.webp
 gif2webp \-lossy \-f 50 picture.gif \-o picture.webp
 .br
 gif2webp \-q 70 \-o picture.webp \-\- \-\-\-picture.gif
+.br
+cat picture.gif | gif2webp \-o \- \-\- \- > output.webp
 
 .SH AUTHORS
 \fBgif2webp\fP is a part of libwebp and was written by the WebP team.

man/img2webp.1

@@ -1,11 +1,13 @@
 .\"                                      Hey, EMACS: -*- nroff -*-
-.TH IMG2WEBP 1 "January 23, 2017"
+.TH IMG2WEBP 1 "February 7, 2018"
 .SH NAME
 img2webp \- create animated WebP file from a sequence of input images.
 .SH SYNOPSIS
 .B img2webp
 [file_level_options] [files] [per_frame_options...]
 .br
+.B img2webp argument_file_name
+.br
 .SH DESCRIPTION
 This manual page documents the
 .B img2webp
@@ -13,6 +15,9 @@ command.
 .PP
 \fBimg2webp\fP compresses a sequence of images using the animated WebP format.
 Input images can either be PNG, JPEG, TIFF or WebP.
+If a single file name (not starting with the character '\-') is supplied as
+the argument, the command line argument are actually tokenized from this file.
+This allows for easy scripting or using large number of arguments.
 .SH FILE-LEVEL OPTIONS
 The file-level options are applied at the beginning of the compression process,
 before the input frames are read.
@@ -40,8 +45,8 @@ lossy or lossless compression for each frame heuristically. This global
 option disables the local option \fB-lossy\fP and \fB-lossless\fP .
 .TP
 .BI \-loop " int
-Specifies the number of times the animation should loop. Using '0' means
-'loop indefinitely'.
+Specifies the number of times the animation should loop. Using '0'
+means 'loop indefinitely'.
 .TP
 .BI \-v
 Be more verbose.

man/webpinfo.1

@@ -1,5 +1,5 @@
 .\"                                      Hey, EMACS: -*- nroff -*-
-.TH WEBPINFO 1 "May 08, 2017"
+.TH WEBPINFO 1 "November 24, 2017"
 .SH NAME
 webpinfo \- print out the chunk level structure of WebP files
 along with basic integrity checks.
@@ -22,16 +22,19 @@ WebP format.
 
 .SH OPTIONS
 .TP
-.B -quiet
+.B \-version
+Print the version number (as major.minor.revision) and exit.
+.TP
+.B \-quiet
 Do not show chunk parsing information.
 .TP
-.B -diag
+.B \-diag
 Show parsing error diagnosis.
 .TP
-.B -summary
+.B \-summary
 Show chunk stats summary.
 .TP
-.BI -bitstream_info
+.BI \-bitstream_info
 Parse bitstream header.
 .TP
 .B \-h, \-help

man/webpmux.1

@@ -1,5 +1,5 @@
 .\"                                      Hey, EMACS: -*- nroff -*-
-.TH WEBPMUX 1 "November 10, 2016"
+.TH WEBPMUX 1 "December 1, 2017"
 .SH NAME
 webpmux \- create animated WebP files from non\-animated WebP images, extract
 frames from animated WebP images, and manage XMP/EXIF metadata and ICC profile.
@@ -48,6 +48,8 @@ frames from animated WebP images, and manage XMP/EXIF metadata and ICC profile.
 .B webpmux [\-h|\-help]
 .br
 .B webpmux \-version
+.br
+.B webpmux argument_file_name
 .SH DESCRIPTION
 This manual page documents the
 .B webpmux
@@ -55,6 +57,9 @@ command.
 .PP
 \fBwebpmux\fP can be used to create/extract from animated WebP files, as well as
 to add/extract/strip XMP/EXIF metadata and ICC profile.
+If a single file name (not starting with the character '\-') is supplied as
+the argument, the command line argument are actually tokenized from this file.
+This allows for easy scripting or using large number of arguments.
 .SH OPTIONS
 .SS GET_OPTIONS (\-get):
 .TP

src/Makefile.am

@@ -22,6 +22,7 @@ commondir = $(includedir)/webp
 libwebp_la_SOURCES =
 libwebpinclude_HEADERS =
 libwebpinclude_HEADERS += webp/encode.h
+
 noinst_HEADERS =
 noinst_HEADERS += webp/format_constants.h
 
@@ -35,7 +36,7 @@ libwebp_la_LIBADD += utils/libwebputils.la
 # other than the ones listed on the command line, i.e., after linking, it will
 # not have unresolved symbols. Some platforms (Windows among them) require all
 # symbols in shared libraries to be resolved at library creation.
-libwebp_la_LDFLAGS = -no-undefined -version-info 7:0:0
+libwebp_la_LDFLAGS = -no-undefined -version-info 7:1:0
 libwebpincludedir = $(includedir)/webp
 pkgconfig_DATA = libwebp.pc
 
@@ -47,7 +48,7 @@ if BUILD_LIBWEBPDECODER
   libwebpdecoder_la_LIBADD += dsp/libwebpdspdecode.la
   libwebpdecoder_la_LIBADD += utils/libwebputilsdecode.la
 
-  libwebpdecoder_la_LDFLAGS = -no-undefined -version-info 3:0:0
+  libwebpdecoder_la_LDFLAGS = -no-undefined -version-info 3:1:0
   pkgconfig_DATA += libwebpdecoder.pc
 endif
 

src/dec/Makefile.am

@@ -1,3 +1,4 @@
+AM_CPPFLAGS += -I$(top_builddir) -I$(top_srcdir)
 noinst_LTLIBRARIES = libwebpdecode.la
 
 libwebpdecode_la_SOURCES =
@@ -24,5 +25,5 @@ libwebpdecodeinclude_HEADERS += ../webp/types.h
 noinst_HEADERS =
 noinst_HEADERS += ../webp/format_constants.h
 
-libwebpdecode_la_CPPFLAGS = $(AM_CPPFLAGS) $(USE_EXPERIMENTAL_CODE)
+libwebpdecode_la_CPPFLAGS = $(AM_CPPFLAGS)
 libwebpdecodeincludedir = $(includedir)/webp

src/dec/alpha_dec.c

@@ -12,13 +12,13 @@
 // Author: Skal (pascal.massimino@gmail.com)
 
 #include <stdlib.h>
-#include "./alphai_dec.h"
-#include "./vp8i_dec.h"
-#include "./vp8li_dec.h"
-#include "../dsp/dsp.h"
-#include "../utils/quant_levels_dec_utils.h"
-#include "../utils/utils.h"
-#include "../webp/format_constants.h"
+#include "src/dec/alphai_dec.h"
+#include "src/dec/vp8i_dec.h"
+#include "src/dec/vp8li_dec.h"
+#include "src/dsp/dsp.h"
+#include "src/utils/quant_levels_dec_utils.h"
+#include "src/utils/utils.h"
+#include "src/webp/format_constants.h"
 
 //------------------------------------------------------------------------------
 // ALPHDecoder object.

src/dec/alphai_dec.h

@@ -11,11 +11,11 @@
 //
 // Author: Urvang (urvang@google.com)
 
-#ifndef WEBP_DEC_ALPHAI_H_
-#define WEBP_DEC_ALPHAI_H_
+#ifndef WEBP_DEC_ALPHAI_DEC_H_
+#define WEBP_DEC_ALPHAI_DEC_H_
 
-#include "./webpi_dec.h"
-#include "../utils/filters_utils.h"
+#include "src/dec/webpi_dec.h"
+#include "src/utils/filters_utils.h"
 
 #ifdef __cplusplus
 extern "C" {
@@ -51,4 +51,4 @@ void WebPDeallocateAlphaMemory(VP8Decoder* const dec);
 }    // extern "C"
 #endif
 
-#endif  /* WEBP_DEC_ALPHAI_H_ */
+#endif  /* WEBP_DEC_ALPHAI_DEC_H_ */

src/dec/buffer_dec.c

@@ -13,15 +13,15 @@
 
 #include <stdlib.h>
 
-#include "./vp8i_dec.h"
-#include "./webpi_dec.h"
-#include "../utils/utils.h"
+#include "src/dec/vp8i_dec.h"
+#include "src/dec/webpi_dec.h"
+#include "src/utils/utils.h"
 
 //------------------------------------------------------------------------------
 // WebPDecBuffer
 
 // Number of bytes per pixel for the different color-spaces.
-static const int kModeBpp[MODE_LAST] = {
+static const uint8_t kModeBpp[MODE_LAST] = {
   3, 4, 3, 4, 4, 2, 2,
   4, 4, 4, 2,    // pre-multiplied modes
   1, 1 };
@@ -36,7 +36,7 @@ static int IsValidColorspace(int webp_csp_mode) {
 // strictly speaking, the very last (or first, if flipped) row
 // doesn't require padding.
 #define MIN_BUFFER_SIZE(WIDTH, HEIGHT, STRIDE)       \
-    (uint64_t)(STRIDE) * ((HEIGHT) - 1) + (WIDTH)
+    ((uint64_t)(STRIDE) * ((HEIGHT) - 1) + (WIDTH))
 
 static VP8StatusCode CheckDecBuffer(const WebPDecBuffer* const buffer) {
   int ok = 1;
@@ -98,9 +98,14 @@ static VP8StatusCode AllocateBuffer(WebPDecBuffer* const buffer) {
     uint64_t uv_size = 0, a_size = 0, total_size;
     // We need memory and it hasn't been allocated yet.
     // => initialize output buffer, now that dimensions are known.
-    const int stride = w * kModeBpp[mode];
-    const uint64_t size = (uint64_t)stride * h;
+    int stride;
+    uint64_t size;
 
+    if ((uint64_t)w * kModeBpp[mode] >= (1ull << 32)) {
+      return VP8_STATUS_INVALID_PARAM;
+    }
+    stride = w * kModeBpp[mode];
+    size = (uint64_t)stride * h;
     if (!WebPIsRGBMode(mode)) {
       uv_stride = (w + 1) / 2;
       uv_size = (uint64_t)uv_stride * ((h + 1) / 2);
@@ -169,11 +174,11 @@ VP8StatusCode WebPFlipBuffer(WebPDecBuffer* const buffer) {
   return VP8_STATUS_OK;
 }
 
-VP8StatusCode WebPAllocateDecBuffer(int w, int h,
+VP8StatusCode WebPAllocateDecBuffer(int width, int height,
                                     const WebPDecoderOptions* const options,
-                                    WebPDecBuffer* const out) {
+                                    WebPDecBuffer* const buffer) {
   VP8StatusCode status;
-  if (out == NULL || w <= 0 || h <= 0) {
+  if (buffer == NULL || width <= 0 || height <= 0) {
     return VP8_STATUS_INVALID_PARAM;
   }
   if (options != NULL) {    // First, apply options if there is any.
@@ -182,33 +187,39 @@ VP8StatusCode WebPAllocateDecBuffer(int w, int h,
       const int ch = options->crop_height;
       const int x = options->crop_left & ~1;
       const int y = options->crop_top & ~1;
-      if (x < 0 || y < 0 || cw <= 0 || ch <= 0 || x + cw > w || y + ch > h) {
+      if (x < 0 || y < 0 || cw <= 0 || ch <= 0 ||
+          x + cw > width || y + ch > height) {
         return VP8_STATUS_INVALID_PARAM;   // out of frame boundary.
       }
-      w = cw;
-      h = ch;
+      width = cw;
+      height = ch;
     }
+
     if (options->use_scaling) {
+#if !defined(WEBP_REDUCE_SIZE)
       int scaled_width = options->scaled_width;
       int scaled_height = options->scaled_height;
       if (!WebPRescalerGetScaledDimensions(
-              w, h, &scaled_width, &scaled_height)) {
+              width, height, &scaled_width, &scaled_height)) {
         return VP8_STATUS_INVALID_PARAM;
       }
-      w = scaled_width;
-      h = scaled_height;
+      width = scaled_width;
+      height = scaled_height;
+#else
+      return VP8_STATUS_INVALID_PARAM;   // rescaling not supported
+#endif
     }
   }
-  out->width = w;
-  out->height = h;
+  buffer->width = width;
+  buffer->height = height;
 
   // Then, allocate buffer for real.
-  status = AllocateBuffer(out);
+  status = AllocateBuffer(buffer);
   if (status != VP8_STATUS_OK) return status;
 
   // Use the stride trick if vertical flip is needed.
   if (options != NULL && options->flip) {
-    status = WebPFlipBuffer(out);
+    status = WebPFlipBuffer(buffer);
   }
   return status;
 }

src/dec/common_dec.h

@@ -11,8 +11,8 @@
 //
 // Author: Skal (pascal.massimino@gmail.com)
 
-#ifndef WEBP_DEC_COMMON_H_
-#define WEBP_DEC_COMMON_H_
+#ifndef WEBP_DEC_COMMON_DEC_H_
+#define WEBP_DEC_COMMON_DEC_H_
 
 // intra prediction modes
 enum { B_DC_PRED = 0,   // 4x4 modes
@@ -51,4 +51,4 @@ enum { MB_FEATURE_TREE_PROBS = 3,
        NUM_PROBAS = 11
      };
 
-#endif    // WEBP_DEC_COMMON_H_
+#endif    // WEBP_DEC_COMMON_DEC_H_

src/dec/frame_dec.c

@@ -12,13 +12,13 @@
 // Author: Skal (pascal.massimino@gmail.com)
 
 #include <stdlib.h>
-#include "./vp8i_dec.h"
-#include "../utils/utils.h"
+#include "src/dec/vp8i_dec.h"
+#include "src/utils/utils.h"
 
 //------------------------------------------------------------------------------
 // Main reconstruction function.
 
-static const int kScan[16] = {
+static const uint16_t kScan[16] = {
   0 +  0 * BPS,  4 +  0 * BPS, 8 +  0 * BPS, 12 +  0 * BPS,
   0 +  4 * BPS,  4 +  4 * BPS, 8 +  4 * BPS, 12 +  4 * BPS,
   0 +  8 * BPS,  4 +  8 * BPS, 8 +  8 * BPS, 12 +  8 * BPS,
@@ -320,7 +320,7 @@ static void PrecomputeFilterStrengths(VP8Decoder* const dec) {
 #define MIN_DITHER_AMP 4
 
 #define DITHER_AMP_TAB_SIZE 12
-static const int kQuantToDitherAmp[DITHER_AMP_TAB_SIZE] = {
+static const uint8_t kQuantToDitherAmp[DITHER_AMP_TAB_SIZE] = {
   // roughly, it's dqm->uv_mat_[1]
   8, 7, 6, 4, 4, 2, 2, 2, 1, 1, 1, 1
 };
@@ -400,7 +400,9 @@ static void DitherRow(VP8Decoder* const dec) {
 #define MACROBLOCK_VPOS(mb_y)  ((mb_y) * 16)    // vertical position of a MB
 
 // Finalize and transmit a complete row. Return false in case of user-abort.
-static int FinishRow(VP8Decoder* const dec, VP8Io* const io) {
+static int FinishRow(void* arg1, void* arg2) {
+  VP8Decoder* const dec = (VP8Decoder*)arg1;
+  VP8Io* const io = (VP8Io*)arg2;
   int ok = 1;
   const VP8ThreadContext* const ctx = &dec->thread_ctx_;
   const int cache_id = ctx->id_;
@@ -448,10 +450,9 @@ static int FinishRow(VP8Decoder* const dec, VP8Io* const io) {
     if (y_end > io->crop_bottom) {
       y_end = io->crop_bottom;    // make sure we don't overflow on last row.
     }
+    // If dec->alpha_data_ is not NULL, we have some alpha plane present.
     io->a = NULL;
     if (dec->alpha_data_ != NULL && y_start < y_end) {
-      // TODO(skal): testing presence of alpha with dec->alpha_data_ is not a
-      // good idea.
       io->a = VP8DecompressAlphaRows(dec, io, y_start, y_end - y_start);
       if (io->a == NULL) {
         return VP8SetError(dec, VP8_STATUS_BITSTREAM_ERROR,
@@ -558,7 +559,6 @@ VP8StatusCode VP8EnterCritical(VP8Decoder* const dec, VP8Io* const io) {
   if (io->bypass_filtering) {
     dec->filter_type_ = 0;
   }
-  // TODO(skal): filter type / strength / sharpness forcing
 
   // Define the area where we can skip in-loop filtering, in case of cropping.
   //
@@ -569,8 +569,6 @@ VP8StatusCode VP8EnterCritical(VP8Decoder* const dec, VP8Io* const io) {
   // Means: there's a dependency chain that goes all the way up to the
   // top-left corner of the picture (MB #0). We must filter all the previous
   // macroblocks.
-  // TODO(skal): add an 'approximate_decoding' option, that won't produce
-  // a 1:1 bit-exactness for complex filtering?
   {
     const int extra_pixels = kFilterExtraRows[dec->filter_type_];
     if (dec->filter_type_ == 2) {
@@ -651,7 +649,7 @@ static int InitThreadContext(VP8Decoder* const dec) {
     }
     worker->data1 = dec;
     worker->data2 = (void*)&dec->thread_ctx_.io_;
-    worker->hook = (WebPWorkerHook)FinishRow;
+    worker->hook = FinishRow;
     dec->num_caches_ =
       (dec->filter_type_ > 0) ? MT_CACHE_LINES : MT_CACHE_LINES - 1;
   } else {
@@ -728,7 +726,7 @@ static int AllocateMemory(VP8Decoder* const dec) {
   }
 
   mem = (uint8_t*)dec->mem_;
-  dec->intra_t_ = (uint8_t*)mem;
+  dec->intra_t_ = mem;
   mem += intra_pred_mode_size;
 
   dec->yuv_t_ = (VP8TopSamples*)mem;
@@ -750,7 +748,7 @@ static int AllocateMemory(VP8Decoder* const dec) {
 
   mem = (uint8_t*)WEBP_ALIGN(mem);
   assert((yuv_size & WEBP_ALIGN_CST) == 0);
-  dec->yuv_b_ = (uint8_t*)mem;
+  dec->yuv_b_ = mem;
   mem += yuv_size;
 
   dec->mb_data_ = (VP8MBData*)mem;
@@ -766,7 +764,7 @@ static int AllocateMemory(VP8Decoder* const dec) {
     const int extra_rows = kFilterExtraRows[dec->filter_type_];
     const int extra_y = extra_rows * dec->cache_y_stride_;
     const int extra_uv = (extra_rows / 2) * dec->cache_uv_stride_;
-    dec->cache_y_ = ((uint8_t*)mem) + extra_y;
+    dec->cache_y_ = mem + extra_y;
     dec->cache_u_ = dec->cache_y_
                   + 16 * num_caches * dec->cache_y_stride_ + extra_uv;
     dec->cache_v_ = dec->cache_u_
@@ -776,7 +774,7 @@ static int AllocateMemory(VP8Decoder* const dec) {
   mem += cache_size;
 
   // alpha plane
-  dec->alpha_plane_ = alpha_size ? (uint8_t*)mem : NULL;
+  dec->alpha_plane_ = alpha_size ? mem : NULL;
   mem += alpha_size;
   assert(mem <= (uint8_t*)dec->mem_ + dec->mem_size_);
 

src/dec/idec_dec.c

@@ -15,10 +15,10 @@
 #include <string.h>
 #include <stdlib.h>
 
-#include "./alphai_dec.h"
-#include "./webpi_dec.h"
-#include "./vp8i_dec.h"
-#include "../utils/utils.h"
+#include "src/dec/alphai_dec.h"
+#include "src/dec/webpi_dec.h"
+#include "src/dec/vp8i_dec.h"
+#include "src/utils/utils.h"
 
 // In append mode, buffer allocations increase as multiples of this value.
 // Needs to be a power of 2.
@@ -673,12 +673,12 @@ void WebPIDelete(WebPIDecoder* idec) {
 //------------------------------------------------------------------------------
 // Wrapper toward WebPINewDecoder
 
-WebPIDecoder* WebPINewRGB(WEBP_CSP_MODE mode, uint8_t* output_buffer,
+WebPIDecoder* WebPINewRGB(WEBP_CSP_MODE csp, uint8_t* output_buffer,
                           size_t output_buffer_size, int output_stride) {
   const int is_external_memory = (output_buffer != NULL) ? 1 : 0;
   WebPIDecoder* idec;
 
-  if (mode >= MODE_YUV) return NULL;
+  if (csp >= MODE_YUV) return NULL;
   if (is_external_memory == 0) {    // Overwrite parameters to sane values.
     output_buffer_size = 0;
     output_stride = 0;
@@ -689,7 +689,7 @@ WebPIDecoder* WebPINewRGB(WEBP_CSP_MODE mode, uint8_t* output_buffer,
   }
   idec = WebPINewDecoder(NULL);
   if (idec == NULL) return NULL;
-  idec->output_.colorspace = mode;
+  idec->output_.colorspace = csp;
   idec->output_.is_external_memory = is_external_memory;
   idec->output_.u.RGBA.rgba = output_buffer;
   idec->output_.u.RGBA.stride = output_stride;

src/dec/io_dec.c

@@ -13,11 +13,11 @@
 
 #include <assert.h>
 #include <stdlib.h>
-#include "../dec/vp8i_dec.h"
-#include "./webpi_dec.h"
-#include "../dsp/dsp.h"
-#include "../dsp/yuv.h"
-#include "../utils/utils.h"
+#include "src/dec/vp8i_dec.h"
+#include "src/dec/webpi_dec.h"
+#include "src/dsp/dsp.h"
+#include "src/dsp/yuv.h"
+#include "src/utils/utils.h"
 
 //------------------------------------------------------------------------------
 // Main YUV<->RGB conversion functions
@@ -212,7 +212,7 @@ static int EmitAlphaRGBA4444(const VP8Io* const io, WebPDecParams* const p,
     int num_rows;
     const int start_y = GetAlphaSourceRow(io, &alpha, &num_rows);
     uint8_t* const base_rgba = buf->rgba + start_y * buf->stride;
-#ifdef WEBP_SWAP_16BIT_CSP
+#if (WEBP_SWAP_16BIT_CSP == 1)
     uint8_t* alpha_dst = base_rgba;
 #else
     uint8_t* alpha_dst = base_rgba + 1;
@@ -241,6 +241,7 @@ static int EmitAlphaRGBA4444(const VP8Io* const io, WebPDecParams* const p,
 //------------------------------------------------------------------------------
 // YUV rescaling (no final RGB conversion needed)
 
+#if !defined(WEBP_REDUCE_SIZE)
 static int Rescale(const uint8_t* src, int src_stride,
                    int new_lines, WebPRescaler* const wrk) {
   int num_lines_out = 0;
@@ -431,7 +432,7 @@ static int ExportAlphaRGBA4444(WebPDecParams* const p, int y_pos,
                                int max_lines_out) {
   const WebPRGBABuffer* const buf = &p->output->u.RGBA;
   uint8_t* const base_rgba = buf->rgba + y_pos * buf->stride;
-#ifdef WEBP_SWAP_16BIT_CSP
+#if (WEBP_SWAP_16BIT_CSP == 1)
   uint8_t* alpha_dst = base_rgba;
 #else
   uint8_t* alpha_dst = base_rgba + 1;
@@ -541,6 +542,8 @@ static int InitRGBRescaler(const VP8Io* const io, WebPDecParams* const p) {
   return 1;
 }
 
+#endif  // WEBP_REDUCE_SIZE
+
 //------------------------------------------------------------------------------
 // Default custom functions
 
@@ -561,10 +564,14 @@ static int CustomSetup(VP8Io* io) {
     WebPInitUpsamplers();
   }
   if (io->use_scaling) {
+#if !defined(WEBP_REDUCE_SIZE)
     const int ok = is_rgb ? InitRGBRescaler(io, p) : InitYUVRescaler(io, p);
     if (!ok) {
       return 0;    // memory error
     }
+#else
+    return 0;   // rescaling support not compiled
+#endif
   } else {
     if (is_rgb) {
       WebPInitSamplers();
@@ -598,9 +605,6 @@ static int CustomSetup(VP8Io* io) {
     }
   }
 
-  if (is_rgb) {
-    VP8YUVInit();
-  }
   return 1;
 }
 

src/dec/quant_dec.c

@@ -11,7 +11,7 @@
 //
 // Author: Skal (pascal.massimino@gmail.com)
 
-#include "./vp8i_dec.h"
+#include "src/dec/vp8i_dec.h"
 
 static WEBP_INLINE int clip(int v, int M) {
   return v < 0 ? 0 : v > M ? M : v;

src/dec/tree_dec.c

@@ -11,15 +11,19 @@
 //
 // Author: Skal (pascal.massimino@gmail.com)
 
-#include "./vp8i_dec.h"
-#include "../utils/bit_reader_inl_utils.h"
+#include "src/dec/vp8i_dec.h"
+#include "src/utils/bit_reader_inl_utils.h"
 
+#if !defined(USE_GENERIC_TREE)
 #if !defined(__arm__) && !defined(_M_ARM) && !defined(__aarch64__)
 // using a table is ~1-2% slower on ARM. Prefer the coded-tree approach then.
-#define USE_GENERIC_TREE
+#define USE_GENERIC_TREE 1   // ALTERNATE_CODE
+#else
+#define USE_GENERIC_TREE 0
 #endif
+#endif  // USE_GENERIC_TREE
 
-#ifdef USE_GENERIC_TREE
+#if (USE_GENERIC_TREE == 1)
 static const int8_t kYModesIntra4[18] = {
   -B_DC_PRED, 1,
     -B_TM_PRED, 2,
@@ -317,7 +321,7 @@ static void ParseIntraMode(VP8BitReader* const br,
       int x;
       for (x = 0; x < 4; ++x) {
         const uint8_t* const prob = kBModesProba[top[x]][ymode];
-#ifdef USE_GENERIC_TREE
+#if (USE_GENERIC_TREE == 1)
         // Generic tree-parsing
         int i = kYModesIntra4[VP8GetBit(br, prob[0])];
         while (i > 0) {
@@ -335,7 +339,7 @@ static void ParseIntraMode(VP8BitReader* const br,
                         (!VP8GetBit(br, prob[6]) ? B_LD_PRED :
                           (!VP8GetBit(br, prob[7]) ? B_VL_PRED :
                             (!VP8GetBit(br, prob[8]) ? B_HD_PRED : B_HU_PRED)));
-#endif    // USE_GENERIC_TREE
+#endif  // USE_GENERIC_TREE
         top[x] = ymode;
       }
       memcpy(modes, top, 4 * sizeof(*top));
@@ -498,7 +502,7 @@ static const uint8_t
 
 // Paragraph 9.9
 
-static const int kBands[16 + 1] = {
+static const uint8_t kBands[16 + 1] = {
   0, 1, 2, 3, 6, 4, 5, 6, 6, 6, 6, 6, 6, 6, 6, 7,
   0  // extra entry as sentinel
 };

src/dec/vp8_dec.c

@@ -13,12 +13,12 @@
 
 #include <stdlib.h>
 
-#include "./alphai_dec.h"
-#include "./vp8i_dec.h"
-#include "./vp8li_dec.h"
-#include "./webpi_dec.h"
-#include "../utils/bit_reader_inl_utils.h"
-#include "../utils/utils.h"
+#include "src/dec/alphai_dec.h"
+#include "src/dec/vp8i_dec.h"
+#include "src/dec/vp8li_dec.h"
+#include "src/dec/webpi_dec.h"
+#include "src/utils/bit_reader_inl_utils.h"
+#include "src/utils/utils.h"
 
 //------------------------------------------------------------------------------
 

src/dec/vp8_dec.h

@@ -11,10 +11,10 @@
 //
 // Author: Skal (pascal.massimino@gmail.com)
 
-#ifndef WEBP_WEBP_DECODE_VP8_H_
-#define WEBP_WEBP_DECODE_VP8_H_
+#ifndef WEBP_DEC_VP8_DEC_H_
+#define WEBP_DEC_VP8_DEC_H_
 
-#include "../webp/decode.h"
+#include "src/webp/decode.h"
 
 #ifdef __cplusplus
 extern "C" {
@@ -157,24 +157,24 @@ void VP8Delete(VP8Decoder* const dec);
 // Miscellaneous VP8/VP8L bitstream probing functions.
 
 // Returns true if the next 3 bytes in data contain the VP8 signature.
-WEBP_EXTERN(int) VP8CheckSignature(const uint8_t* const data, size_t data_size);
+WEBP_EXTERN int VP8CheckSignature(const uint8_t* const data, size_t data_size);
 
 // Validates the VP8 data-header and retrieves basic header information viz
 // width and height. Returns 0 in case of formatting error. *width/*height
 // can be passed NULL.
-WEBP_EXTERN(int) VP8GetInfo(
+WEBP_EXTERN int VP8GetInfo(
     const uint8_t* data,
     size_t data_size,    // data available so far
     size_t chunk_size,   // total data size expected in the chunk
     int* const width, int* const height);
 
 // Returns true if the next byte(s) in data is a VP8L signature.
-WEBP_EXTERN(int) VP8LCheckSignature(const uint8_t* const data, size_t size);
+WEBP_EXTERN int VP8LCheckSignature(const uint8_t* const data, size_t size);
 
 // Validates the VP8L data-header and retrieves basic header information viz
 // width, height and alpha. Returns 0 in case of formatting error.
 // width/height/has_alpha can be passed NULL.
-WEBP_EXTERN(int) VP8LGetInfo(
+WEBP_EXTERN int VP8LGetInfo(
     const uint8_t* data, size_t data_size,  // data available so far
     int* const width, int* const height, int* const has_alpha);
 
@@ -182,4 +182,4 @@ WEBP_EXTERN(int) VP8LGetInfo(
 }    // extern "C"
 #endif
 
-#endif  /* WEBP_WEBP_DECODE_VP8_H_ */
+#endif  /* WEBP_DEC_VP8_DEC_H_ */

src/dec/vp8i_dec.h

@@ -11,16 +11,16 @@
 //
 // Author: Skal (pascal.massimino@gmail.com)
 
-#ifndef WEBP_DEC_VP8I_H_
-#define WEBP_DEC_VP8I_H_
+#ifndef WEBP_DEC_VP8I_DEC_H_
+#define WEBP_DEC_VP8I_DEC_H_
 
 #include <string.h>     // for memcpy()
-#include "./common_dec.h"
-#include "./vp8li_dec.h"
-#include "../utils/bit_reader_utils.h"
-#include "../utils/random_utils.h"
-#include "../utils/thread_utils.h"
-#include "../dsp/dsp.h"
+#include "src/dec/common_dec.h"
+#include "src/dec/vp8li_dec.h"
+#include "src/utils/bit_reader_utils.h"
+#include "src/utils/random_utils.h"
+#include "src/utils/thread_utils.h"
+#include "src/dsp/dsp.h"
 
 #ifdef __cplusplus
 extern "C" {
@@ -32,7 +32,7 @@ extern "C" {
 // version numbers
 #define DEC_MAJ_VERSION 0
 #define DEC_MIN_VERSION 6
-#define DEC_REV_VERSION 0
+#define DEC_REV_VERSION 1
 
 // YUV-cache parameters. Cache is 32-bytes wide (= one cacheline).
 // Constraints are: We need to store one 16x16 block of luma samples (y),
@@ -57,7 +57,6 @@ extern "C" {
 //  '|' = left sample,   '-' = top sample,    '+' = top-left sample
 //  't' = extra top-right sample for 4x4 modes
 #define YUV_SIZE (BPS * 17 + BPS * 9)
-#define Y_SIZE   (BPS * 17)
 #define Y_OFF    (BPS * 1 + 8)
 #define U_OFF    (Y_OFF + BPS * 16 + BPS)
 #define V_OFF    (U_OFF + 16)
@@ -317,4 +316,4 @@ const uint8_t* VP8DecompressAlphaRows(VP8Decoder* const dec,
 }    // extern "C"
 #endif
 
-#endif  /* WEBP_DEC_VP8I_H_ */
+#endif  /* WEBP_DEC_VP8I_DEC_H_ */

src/dec/vp8l_dec.c

@@ -14,22 +14,22 @@
 
 #include <stdlib.h>
 
-#include "./alphai_dec.h"
-#include "./vp8li_dec.h"
-#include "../dsp/dsp.h"
-#include "../dsp/lossless.h"
-#include "../dsp/lossless_common.h"
-#include "../dsp/yuv.h"
-#include "../utils/endian_inl_utils.h"
-#include "../utils/huffman_utils.h"
-#include "../utils/utils.h"
+#include "src/dec/alphai_dec.h"
+#include "src/dec/vp8li_dec.h"
+#include "src/dsp/dsp.h"
+#include "src/dsp/lossless.h"
+#include "src/dsp/lossless_common.h"
+#include "src/dsp/yuv.h"
+#include "src/utils/endian_inl_utils.h"
+#include "src/utils/huffman_utils.h"
+#include "src/utils/utils.h"
 
 #define NUM_ARGB_CACHE_ROWS          16
 
 static const int kCodeLengthLiterals = 16;
 static const int kCodeLengthRepeatCode = 16;
-static const int kCodeLengthExtraBits[3] = { 2, 3, 7 };
-static const int kCodeLengthRepeatOffsets[3] = { 3, 3, 11 };
+static const uint8_t kCodeLengthExtraBits[3] = { 2, 3, 7 };
+static const uint8_t kCodeLengthRepeatOffsets[3] = { 3, 3, 11 };
 
 // -----------------------------------------------------------------------------
 //  Five Huffman codes are used at each meta code:
@@ -86,7 +86,7 @@ static const uint8_t kCodeToPlane[CODE_TO_PLANE_CODES] = {
 // All values computed for 8-bit first level lookup with Mark Adler's tool:
 // http://www.hdfgroup.org/ftp/lib-external/zlib/zlib-1.2.5/examples/enough.c
 #define FIXED_TABLE_SIZE (630 * 3 + 410)
-static const int kTableSize[12] = {
+static const uint16_t kTableSize[12] = {
   FIXED_TABLE_SIZE + 654,
   FIXED_TABLE_SIZE + 656,
   FIXED_TABLE_SIZE + 658,
@@ -485,6 +485,7 @@ static int ReadHuffmanCodes(VP8LDecoder* const dec, int xsize, int ysize,
 //------------------------------------------------------------------------------
 // Scaling.
 
+#if !defined(WEBP_REDUCE_SIZE)
 static int AllocateAndInitRescaler(VP8LDecoder* const dec, VP8Io* const io) {
   const int num_channels = 4;
   const int in_width = io->mb_w;
@@ -516,10 +517,13 @@ static int AllocateAndInitRescaler(VP8LDecoder* const dec, VP8Io* const io) {
                    out_width, out_height, 0, num_channels, work);
   return 1;
 }
+#endif   // WEBP_REDUCE_SIZE
 
 //------------------------------------------------------------------------------
 // Export to ARGB
 
+#if !defined(WEBP_REDUCE_SIZE)
+
 // We have special "export" function since we need to convert from BGRA
 static int Export(WebPRescaler* const rescaler, WEBP_CSP_MODE colorspace,
                   int rgba_stride, uint8_t* const rgba) {
@@ -561,6 +565,8 @@ static int EmitRescaledRowsRGBA(const VP8LDecoder* const dec,
   return num_lines_out;
 }
 
+#endif   // WEBP_REDUCE_SIZE
+
 // Emit rows without any scaling.
 static int EmitRows(WEBP_CSP_MODE colorspace,
                     const uint8_t* row_in, int in_stride,
@@ -746,9 +752,12 @@ static void ProcessRows(VP8LDecoder* const dec, int row) {
       if (WebPIsRGBMode(output->colorspace)) {  // convert to RGBA
         const WebPRGBABuffer* const buf = &output->u.RGBA;
         uint8_t* const rgba = buf->rgba + dec->last_out_row_ * buf->stride;
-        const int num_rows_out = io->use_scaling ?
+        const int num_rows_out =
+#if !defined(WEBP_REDUCE_SIZE)
+         io->use_scaling ?
             EmitRescaledRowsRGBA(dec, rows_data, in_stride, io->mb_h,
                                  rgba, buf->stride) :
+#endif  // WEBP_REDUCE_SIZE
             EmitRows(output->colorspace, rows_data, in_stride,
                      io->mb_w, io->mb_h, rgba, buf->stride);
         // Update 'last_out_row_'.
@@ -1632,12 +1641,19 @@ int VP8LDecodeImage(VP8LDecoder* const dec) {
 
     if (!AllocateInternalBuffers32b(dec, io->width)) goto Err;
 
+#if !defined(WEBP_REDUCE_SIZE)
     if (io->use_scaling && !AllocateAndInitRescaler(dec, io)) goto Err;
-
+#else
+    if (io->use_scaling) {
+      dec->status_ = VP8_STATUS_INVALID_PARAM;
+      goto Err;
+    }
+#endif
     if (io->use_scaling || WebPIsPremultipliedMode(dec->output_->colorspace)) {
       // need the alpha-multiply functions for premultiplied output or rescaling
       WebPInitAlphaProcessing();
     }
+
     if (!WebPIsRGBMode(dec->output_->colorspace)) {
       WebPInitConvertARGBToYUV();
       if (dec->output_->u.YUVA.a != NULL) WebPInitAlphaProcessing();

src/dec/vp8li_dec.h

@@ -12,14 +12,14 @@
 // Author: Skal (pascal.massimino@gmail.com)
 //         Vikas Arora(vikaas.arora@gmail.com)
 
-#ifndef WEBP_DEC_VP8LI_H_
-#define WEBP_DEC_VP8LI_H_
+#ifndef WEBP_DEC_VP8LI_DEC_H_
+#define WEBP_DEC_VP8LI_DEC_H_
 
 #include <string.h>     // for memcpy()
-#include "./webpi_dec.h"
-#include "../utils/bit_reader_utils.h"
-#include "../utils/color_cache_utils.h"
-#include "../utils/huffman_utils.h"
+#include "src/dec/webpi_dec.h"
+#include "src/utils/bit_reader_utils.h"
+#include "src/utils/color_cache_utils.h"
+#include "src/utils/huffman_utils.h"
 
 #ifdef __cplusplus
 extern "C" {
@@ -132,4 +132,4 @@ void VP8LDelete(VP8LDecoder* const dec);
 }    // extern "C"
 #endif
 
-#endif  /* WEBP_DEC_VP8LI_H_ */
+#endif  /* WEBP_DEC_VP8LI_DEC_H_ */

src/dec/webp_dec.c

@@ -13,11 +13,11 @@
 
 #include <stdlib.h>
 
-#include "./vp8i_dec.h"
-#include "./vp8li_dec.h"
-#include "./webpi_dec.h"
-#include "../utils/utils.h"
-#include "../webp/mux_types.h"  // ALPHA_FLAG
+#include "src/dec/vp8i_dec.h"
+#include "src/dec/vp8li_dec.h"
+#include "src/dec/webpi_dec.h"
+#include "src/utils/utils.h"
+#include "src/webp/mux_types.h"  // ALPHA_FLAG
 
 //------------------------------------------------------------------------------
 // RIFF layout is:
@@ -421,7 +421,9 @@ VP8StatusCode WebPParseHeaders(WebPHeaderStructure* const headers) {
                                 NULL, NULL, NULL, &has_animation,
                                 NULL, headers);
   if (status == VP8_STATUS_OK || status == VP8_STATUS_NOT_ENOUGH_DATA) {
-    // TODO(jzern): full support of animation frames will require API additions.
+    // The WebPDemux API + libwebp can be used to decode individual
+    // uncomposited frames or the WebPAnimDecoder can be used to fully
+    // reconstruct them (see webp/demux.h).
     if (has_animation) {
       status = VP8_STATUS_UNSUPPORTED_FEATURE;
     }

src/dec/webpi_dec.h

@@ -11,15 +11,15 @@
 //
 // Author: somnath@google.com (Somnath Banerjee)
 
-#ifndef WEBP_DEC_WEBPI_H_
-#define WEBP_DEC_WEBPI_H_
+#ifndef WEBP_DEC_WEBPI_DEC_H_
+#define WEBP_DEC_WEBPI_DEC_H_
 
 #ifdef __cplusplus
 extern "C" {
 #endif
 
-#include "../utils/rescaler_utils.h"
-#include "./vp8_dec.h"
+#include "src/utils/rescaler_utils.h"
+#include "src/dec/vp8_dec.h"
 
 //------------------------------------------------------------------------------
 // WebPDecParams: Decoding output parameters. Transient internal object.
@@ -130,4 +130,4 @@ int WebPAvoidSlowMemory(const WebPDecBuffer* const output,
 }    // extern "C"
 #endif
 
-#endif  /* WEBP_DEC_WEBPI_H_ */
+#endif  /* WEBP_DEC_WEBPI_DEC_H_ */

src/demux/Makefile.am

@@ -1,3 +1,4 @@
+AM_CPPFLAGS += -I$(top_builddir) -I$(top_srcdir)
 lib_LTLIBRARIES = libwebpdemux.la
 
 libwebpdemux_la_SOURCES =
@@ -9,6 +10,6 @@ libwebpdemuxinclude_HEADERS += ../webp/mux_types.h
 libwebpdemuxinclude_HEADERS += ../webp/types.h
 
 libwebpdemux_la_LIBADD = ../libwebp.la
-libwebpdemux_la_LDFLAGS = -no-undefined -version-info 2:2:0
+libwebpdemux_la_LDFLAGS = -no-undefined -version-info 2:3:0
 libwebpdemuxincludedir = $(includedir)/webp
 pkgconfig_DATA = libwebpdemux.pc

src/demux/anim_decode.c

@@ -11,15 +11,15 @@
 //
 
 #ifdef HAVE_CONFIG_H
-#include "../webp/config.h"
+#include "src/webp/config.h"
 #endif
 
 #include <assert.h>
 #include <string.h>
 
-#include "../utils/utils.h"
-#include "../webp/decode.h"
-#include "../webp/demux.h"
+#include "src/utils/utils.h"
+#include "src/webp/decode.h"
+#include "src/webp/demux.h"
 
 #define NUM_CHANNELS 4
 

src/demux/demux.c

@@ -11,21 +11,21 @@
 //
 
 #ifdef HAVE_CONFIG_H
-#include "../webp/config.h"
+#include "src/webp/config.h"
 #endif
 
 #include <assert.h>
 #include <stdlib.h>
 #include <string.h>
 
-#include "../utils/utils.h"
-#include "../webp/decode.h"     // WebPGetFeatures
-#include "../webp/demux.h"
-#include "../webp/format_constants.h"
+#include "src/utils/utils.h"
+#include "src/webp/decode.h"     // WebPGetFeatures
+#include "src/webp/demux.h"
+#include "src/webp/format_constants.h"
 
 #define DMUX_MAJ_VERSION 0
 #define DMUX_MIN_VERSION 3
-#define DMUX_REV_VERSION 2
+#define DMUX_REV_VERSION 3
 
 typedef struct {
   size_t start_;        // start location of the data
@@ -205,12 +205,14 @@ static void SetFrameInfo(size_t start_offset, size_t size,
   frame->complete_ = complete;
 }
 
-// Store image bearing chunks to 'frame'.
+// Store image bearing chunks to 'frame'. 'min_size' is an optional size
+// requirement, it may be zero.
 static ParseStatus StoreFrame(int frame_num, uint32_t min_size,
                               MemBuffer* const mem, Frame* const frame) {
   int alpha_chunks = 0;
   int image_chunks = 0;
-  int done = (MemDataSize(mem) < min_size);
+  int done = (MemDataSize(mem) < CHUNK_HEADER_SIZE ||
+              MemDataSize(mem) < min_size);
   ParseStatus status = PARSE_OK;
 
   if (done) return PARSE_NEED_MORE_DATA;
@@ -401,9 +403,9 @@ static ParseStatus ParseSingleImage(WebPDemuxer* const dmux) {
   frame = (Frame*)WebPSafeCalloc(1ULL, sizeof(*frame));
   if (frame == NULL) return PARSE_ERROR;
 
-  // For the single image case we allow parsing of a partial frame, but we need
-  // at least CHUNK_HEADER_SIZE for parsing.
-  status = StoreFrame(1, CHUNK_HEADER_SIZE, &dmux->mem_, frame);
+  // For the single image case we allow parsing of a partial frame, so no
+  // minimum size is imposed here.
+  status = StoreFrame(1, 0, &dmux->mem_, frame);
   if (status != PARSE_ERROR) {
     const int has_alpha = !!(dmux->feature_flags_ & ALPHA_FLAG);
     // Clear any alpha when the alpha flag is missing.

src/demux/libwebpdemux.rc

@@ -6,8 +6,8 @@
 LANGUAGE LANG_ENGLISH, SUBLANG_ENGLISH_US
 
 VS_VERSION_INFO VERSIONINFO
- FILEVERSION 0,3,0,2
- PRODUCTVERSION 0,3,0,2
+ FILEVERSION 0,3,0,3
+ PRODUCTVERSION 0,3,0,3
  FILEFLAGSMASK 0x3fL
 #ifdef _DEBUG
  FILEFLAGS 0x1L
@@ -24,12 +24,12 @@ BEGIN
         BEGIN
             VALUE "CompanyName", "Google, Inc."
             VALUE "FileDescription", "libwebpdemux DLL"
-            VALUE "FileVersion", "0.3.2"
+            VALUE "FileVersion", "0.3.3"
             VALUE "InternalName", "libwebpdemux.dll"
             VALUE "LegalCopyright", "Copyright (C) 2017"
             VALUE "OriginalFilename", "libwebpdemux.dll"
             VALUE "ProductName", "WebP Image Demuxer"
-            VALUE "ProductVersion", "0.3.2"
+            VALUE "ProductVersion", "0.3.3"
         END
     END
     BLOCK "VarFileInfo"

src/dsp/Makefile.am

@@ -1,9 +1,15 @@
-noinst_LTLIBRARIES = libwebpdsp.la libwebpdsp_avx2.la
-noinst_LTLIBRARIES += libwebpdsp_sse2.la libwebpdspdecode_sse2.la
-noinst_LTLIBRARIES += libwebpdsp_sse41.la libwebpdspdecode_sse41.la
-noinst_LTLIBRARIES += libwebpdsp_neon.la libwebpdspdecode_neon.la
-noinst_LTLIBRARIES += libwebpdsp_msa.la libwebpdspdecode_msa.la
-noinst_LTLIBRARIES += libwebpdspdecode_wasm.la
+AM_CPPFLAGS += -I$(top_builddir) -I$(top_srcdir)
+noinst_LTLIBRARIES =
+noinst_LTLIBRARIES += libwebpdsp.la
+noinst_LTLIBRARIES += libwebpdsp_avx2.la
+noinst_LTLIBRARIES += libwebpdsp_sse2.la
+noinst_LTLIBRARIES += libwebpdspdecode_sse2.la
+noinst_LTLIBRARIES += libwebpdsp_sse41.la
+noinst_LTLIBRARIES += libwebpdspdecode_sse41.la
+noinst_LTLIBRARIES += libwebpdsp_neon.la
+noinst_LTLIBRARIES += libwebpdspdecode_neon.la
+noinst_LTLIBRARIES += libwebpdsp_msa.la
+noinst_LTLIBRARIES += libwebpdspdecode_msa.la
 
 if BUILD_LIBWEBPDECODER
   noinst_LTLIBRARIES += libwebpdspdecode.la
@@ -40,8 +46,6 @@ COMMON_SOURCES += yuv_mips32.c
 COMMON_SOURCES += yuv_mips_dsp_r2.c
 
 ENC_SOURCES =
-ENC_SOURCES += argb.c
-ENC_SOURCES += argb_mips_dsp_r2.c
 ENC_SOURCES += cost.c
 ENC_SOURCES += cost_mips32.c
 ENC_SOURCES += cost_mips_dsp_r2.c
@@ -61,6 +65,8 @@ libwebpdsp_avx2_la_CFLAGS = $(AM_CFLAGS) $(AVX2_FLAGS)
 libwebpdspdecode_sse41_la_SOURCES =
 libwebpdspdecode_sse41_la_SOURCES += alpha_processing_sse41.c
 libwebpdspdecode_sse41_la_SOURCES += dec_sse41.c
+libwebpdspdecode_sse41_la_SOURCES += upsampling_sse41.c
+libwebpdspdecode_sse41_la_SOURCES += yuv_sse41.c
 libwebpdspdecode_sse41_la_CPPFLAGS = $(libwebpdsp_la_CPPFLAGS)
 libwebpdspdecode_sse41_la_CFLAGS = $(AM_CFLAGS) $(SSE41_FLAGS)
 
@@ -97,12 +103,7 @@ libwebpdspdecode_msa_la_SOURCES += upsampling_msa.c
 libwebpdspdecode_msa_la_CPPFLAGS = $(libwebpdsp_msa_la_CPPFLAGS)
 libwebpdspdecode_msa_la_CFLAGS = $(libwebpdsp_msa_la_CFLAGS)
 
-# WASM is not fully integrated into configure; the addition here keeps source
-# extraction by cmake simple.
-libwebpdspdecode_wasm_la_SOURCES = dec_wasm.c
-
 libwebpdsp_sse2_la_SOURCES =
-libwebpdsp_sse2_la_SOURCES += argb_sse2.c
 libwebpdsp_sse2_la_SOURCES += cost_sse2.c
 libwebpdsp_sse2_la_SOURCES += enc_sse2.c
 libwebpdsp_sse2_la_SOURCES += lossless_enc_sse2.c
@@ -140,10 +141,11 @@ noinst_HEADERS += ../webp/decode.h
 
 libwebpdsp_la_CPPFLAGS =
 libwebpdsp_la_CPPFLAGS += $(AM_CPPFLAGS)
-libwebpdsp_la_CPPFLAGS += $(USE_EXPERIMENTAL_CODE) $(USE_SWAP_16BIT_CSP)
+libwebpdsp_la_CPPFLAGS += $(USE_SWAP_16BIT_CSP)
 libwebpdsp_la_LDFLAGS = -lm
 libwebpdsp_la_LIBADD =
-libwebpdsp_la_LIBADD += libwebpdsp_avx2.la libwebpdsp_sse2.la
+libwebpdsp_la_LIBADD += libwebpdsp_avx2.la
+libwebpdsp_la_LIBADD += libwebpdsp_sse2.la
 libwebpdsp_la_LIBADD += libwebpdsp_sse41.la
 libwebpdsp_la_LIBADD += libwebpdsp_neon.la
 libwebpdsp_la_LIBADD += libwebpdsp_msa.la

src/dsp/alpha_processing.c

@@ -12,10 +12,13 @@
 // Author: Skal (pascal.massimino@gmail.com)
 
 #include <assert.h>
-#include "./dsp.h"
+#include "src/dsp/dsp.h"
 
 // Tables can be faster on some platform but incur some extra binary size (~2k).
-// #define USE_TABLES_FOR_ALPHA_MULT
+#if !defined(USE_TABLES_FOR_ALPHA_MULT)
+#define USE_TABLES_FOR_ALPHA_MULT 0   // ALTERNATE_CODE
+#endif
+
 
 // -----------------------------------------------------------------------------
 
@@ -29,7 +32,7 @@ static uint32_t Mult(uint8_t x, uint32_t mult) {
   return v;
 }
 
-#ifdef USE_TABLES_FOR_ALPHA_MULT
+#if (USE_TABLES_FOR_ALPHA_MULT == 1)
 
 static const uint32_t kMultTables[2][256] = {
   {    // (255u << MFIX) / alpha
@@ -132,9 +135,9 @@ static WEBP_INLINE uint32_t GetScale(uint32_t a, int inverse) {
   return inverse ? (255u << MFIX) / a : a * KINV_255;
 }
 
-#endif    // USE_TABLES_FOR_ALPHA_MULT
+#endif  // USE_TABLES_FOR_ALPHA_MULT
 
-void WebPMultARGBRowC(uint32_t* const ptr, int width, int inverse) {
+void WebPMultARGBRow_C(uint32_t* const ptr, int width, int inverse) {
   int x;
   for (x = 0; x < width; ++x) {
     const uint32_t argb = ptr[x];
@@ -154,8 +157,8 @@ void WebPMultARGBRowC(uint32_t* const ptr, int width, int inverse) {
   }
 }
 
-void WebPMultRowC(uint8_t* const ptr, const uint8_t* const alpha,
-                  int width, int inverse) {
+void WebPMultRow_C(uint8_t* const ptr, const uint8_t* const alpha,
+                   int width, int inverse) {
   int x;
   for (x = 0; x < width; ++x) {
     const uint32_t a = alpha[x];
@@ -217,8 +220,9 @@ void WebPMultRows(uint8_t* ptr, int stride,
 #define PREMULTIPLY(x, m) (((x) * (m) + (1U << 23)) >> 24)
 #endif
 
-static void ApplyAlphaMultiply(uint8_t* rgba, int alpha_first,
-                               int w, int h, int stride) {
+#if !WEBP_NEON_OMIT_C_CODE
+static void ApplyAlphaMultiply_C(uint8_t* rgba, int alpha_first,
+                                 int w, int h, int stride) {
   while (h-- > 0) {
     uint8_t* const rgb = rgba + (alpha_first ? 1 : 0);
     const uint8_t* const alpha = rgba + (alpha_first ? 0 : 3);
@@ -235,6 +239,7 @@ static void ApplyAlphaMultiply(uint8_t* rgba, int alpha_first,
     rgba += stride;
   }
 }
+#endif  // !WEBP_NEON_OMIT_C_CODE
 #undef MULTIPLIER
 #undef PREMULTIPLY
 
@@ -254,9 +259,9 @@ static WEBP_INLINE uint8_t multiply(uint8_t x, uint32_t m) {
   return (x * m) >> 16;
 }
 
-static WEBP_INLINE void ApplyAlphaMultiply4444(uint8_t* rgba4444,
-                                               int w, int h, int stride,
-                                               int rg_byte_pos /* 0 or 1 */) {
+static WEBP_INLINE void ApplyAlphaMultiply4444_C(uint8_t* rgba4444,
+                                                 int w, int h, int stride,
+                                                 int rg_byte_pos /* 0 or 1 */) {
   while (h-- > 0) {
     int i;
     for (i = 0; i < w; ++i) {
@@ -275,15 +280,16 @@ static WEBP_INLINE void ApplyAlphaMultiply4444(uint8_t* rgba4444,
 }
 #undef MULTIPLIER
 
-static void ApplyAlphaMultiply_16b(uint8_t* rgba4444,
-                                   int w, int h, int stride) {
-#ifdef WEBP_SWAP_16BIT_CSP
-  ApplyAlphaMultiply4444(rgba4444, w, h, stride, 1);
+static void ApplyAlphaMultiply_16b_C(uint8_t* rgba4444,
+                                     int w, int h, int stride) {
+#if (WEBP_SWAP_16BIT_CSP == 1)
+  ApplyAlphaMultiply4444_C(rgba4444, w, h, stride, 1);
 #else
-  ApplyAlphaMultiply4444(rgba4444, w, h, stride, 0);
+  ApplyAlphaMultiply4444_C(rgba4444, w, h, stride, 0);
 #endif
 }
 
+#if !WEBP_NEON_OMIT_C_CODE
 static int DispatchAlpha_C(const uint8_t* alpha, int alpha_stride,
                            int width, int height,
                            uint8_t* dst, int dst_stride) {
@@ -338,6 +344,46 @@ static void ExtractGreen_C(const uint32_t* argb, uint8_t* alpha, int size) {
   int i;
   for (i = 0; i < size; ++i) alpha[i] = argb[i] >> 8;
 }
+#endif  // !WEBP_NEON_OMIT_C_CODE
+
+//------------------------------------------------------------------------------
+
+static int HasAlpha8b_C(const uint8_t* src, int length) {
+  while (length-- > 0) if (*src++ != 0xff) return 1;
+  return 0;
+}
+
+static int HasAlpha32b_C(const uint8_t* src, int length) {
+  int x;
+  for (x = 0; length-- > 0; x += 4) if (src[x] != 0xff) return 1;
+  return 0;
+}
+
+//------------------------------------------------------------------------------
+// Simple channel manipulations.
+
+static WEBP_INLINE uint32_t MakeARGB32(int a, int r, int g, int b) {
+  return (((uint32_t)a << 24) | (r << 16) | (g << 8) | b);
+}
+
+#ifdef WORDS_BIGENDIAN
+static void PackARGB_C(const uint8_t* a, const uint8_t* r, const uint8_t* g,
+                       const uint8_t* b, int len, uint32_t* out) {
+  int i;
+  for (i = 0; i < len; ++i) {
+    out[i] = MakeARGB32(a[4 * i], r[4 * i], g[4 * i], b[4 * i]);
+  }
+}
+#endif
+
+static void PackRGB_C(const uint8_t* r, const uint8_t* g, const uint8_t* b,
+                      int len, int step, uint32_t* out) {
+  int i, offset = 0;
+  for (i = 0; i < len; ++i) {
+    out[i] = MakeARGB32(0xff, r[offset], g[offset], b[offset]);
+    offset += step;
+  }
+}
 
 void (*WebPApplyAlphaMultiply)(uint8_t*, int, int, int, int);
 void (*WebPApplyAlphaMultiply4444)(uint8_t*, int, int, int);
@@ -345,6 +391,15 @@ int (*WebPDispatchAlpha)(const uint8_t*, int, int, int, uint8_t*, int);
 void (*WebPDispatchAlphaToGreen)(const uint8_t*, int, int, int, uint32_t*, int);
 int (*WebPExtractAlpha)(const uint8_t*, int, int, int, uint8_t*, int);
 void (*WebPExtractGreen)(const uint32_t* argb, uint8_t* alpha, int size);
+#ifdef WORDS_BIGENDIAN
+void (*WebPPackARGB)(const uint8_t* a, const uint8_t* r, const uint8_t* g,
+                     const uint8_t* b, int, uint32_t*);
+#endif
+void (*WebPPackRGB)(const uint8_t* r, const uint8_t* g, const uint8_t* b,
+                    int len, int step, uint32_t* out);
+
+int (*WebPHasAlpha8b)(const uint8_t* src, int length);
+int (*WebPHasAlpha32b)(const uint8_t* src, int length);
 
 //------------------------------------------------------------------------------
 // Init function
@@ -360,15 +415,24 @@ static volatile VP8CPUInfo alpha_processing_last_cpuinfo_used =
 WEBP_TSAN_IGNORE_FUNCTION void WebPInitAlphaProcessing(void) {
   if (alpha_processing_last_cpuinfo_used == VP8GetCPUInfo) return;
 
-  WebPMultARGBRow = WebPMultARGBRowC;
-  WebPMultRow = WebPMultRowC;
-  WebPApplyAlphaMultiply = ApplyAlphaMultiply;
-  WebPApplyAlphaMultiply4444 = ApplyAlphaMultiply_16b;
+  WebPMultARGBRow = WebPMultARGBRow_C;
+  WebPMultRow = WebPMultRow_C;
+  WebPApplyAlphaMultiply4444 = ApplyAlphaMultiply_16b_C;
 
+#ifdef WORDS_BIGENDIAN
+  WebPPackARGB = PackARGB_C;
+#endif
+  WebPPackRGB = PackRGB_C;
+#if !WEBP_NEON_OMIT_C_CODE
+  WebPApplyAlphaMultiply = ApplyAlphaMultiply_C;
   WebPDispatchAlpha = DispatchAlpha_C;
   WebPDispatchAlphaToGreen = DispatchAlphaToGreen_C;
   WebPExtractAlpha = ExtractAlpha_C;
   WebPExtractGreen = ExtractGreen_C;
+#endif
+
+  WebPHasAlpha8b = HasAlpha8b_C;
+  WebPHasAlpha32b = HasAlpha32b_C;
 
   // If defined, use CPUInfo() to overwrite some pointers with faster versions.
   if (VP8GetCPUInfo != NULL) {
@@ -382,16 +446,34 @@ WEBP_TSAN_IGNORE_FUNCTION void WebPInitAlphaProcessing(void) {
 #endif
     }
 #endif
-#if defined(WEBP_USE_NEON)
-    if (VP8GetCPUInfo(kNEON)) {
-      WebPInitAlphaProcessingNEON();
-    }
-#endif
 #if defined(WEBP_USE_MIPS_DSP_R2)
     if (VP8GetCPUInfo(kMIPSdspR2)) {
       WebPInitAlphaProcessingMIPSdspR2();
     }
 #endif
   }
+
+#if defined(WEBP_USE_NEON)
+  if (WEBP_NEON_OMIT_C_CODE ||
+      (VP8GetCPUInfo != NULL && VP8GetCPUInfo(kNEON))) {
+    WebPInitAlphaProcessingNEON();
+  }
+#endif
+
+  assert(WebPMultARGBRow != NULL);
+  assert(WebPMultRow != NULL);
+  assert(WebPApplyAlphaMultiply != NULL);
+  assert(WebPApplyAlphaMultiply4444 != NULL);
+  assert(WebPDispatchAlpha != NULL);
+  assert(WebPDispatchAlphaToGreen != NULL);
+  assert(WebPExtractAlpha != NULL);
+  assert(WebPExtractGreen != NULL);
+#ifdef WORDS_BIGENDIAN
+  assert(WebPPackARGB != NULL);
+#endif
+  assert(WebPPackRGB != NULL);
+  assert(WebPHasAlpha8b != NULL);
+  assert(WebPHasAlpha32b != NULL);
+
   alpha_processing_last_cpuinfo_used = VP8GetCPUInfo;
 }

src/dsp/alpha_processing_mips_dsp_r2.c

@@ -12,13 +12,13 @@
 // Author(s): Branimir Vasic (branimir.vasic@imgtec.com)
 //            Djordje Pesut  (djordje.pesut@imgtec.com)
 
-#include "./dsp.h"
+#include "src/dsp/dsp.h"
 
 #if defined(WEBP_USE_MIPS_DSP_R2)
 
-static int DispatchAlpha(const uint8_t* alpha, int alpha_stride,
-                         int width, int height,
-                         uint8_t* dst, int dst_stride) {
+static int DispatchAlpha_MIPSdspR2(const uint8_t* alpha, int alpha_stride,
+                                   int width, int height,
+                                   uint8_t* dst, int dst_stride) {
   uint32_t alpha_mask = 0xffffffff;
   int i, j, temp0;
 
@@ -79,7 +79,8 @@ static int DispatchAlpha(const uint8_t* alpha, int alpha_stride,
   return (alpha_mask != 0xff);
 }
 
-static void MultARGBRow(uint32_t* const ptr, int width, int inverse) {
+static void MultARGBRow_MIPSdspR2(uint32_t* const ptr, int width,
+                                  int inverse) {
   int x;
   const uint32_t c_00ffffff = 0x00ffffffu;
   const uint32_t c_ff000000 = 0xff000000u;
@@ -124,14 +125,100 @@ static void MultARGBRow(uint32_t* const ptr, int width, int inverse) {
   }
 }
 
+#ifdef WORDS_BIGENDIAN
+static void PackARGB_MIPSdspR2(const uint8_t* a, const uint8_t* r,
+                               const uint8_t* g, const uint8_t* b, int len,
+                               uint32_t* out) {
+  int temp0, temp1, temp2, temp3, offset;
+  const int rest = len & 1;
+  const uint32_t* const loop_end = out + len - rest;
+  const int step = 4;
+  __asm__ volatile (
+    "xor          %[offset],   %[offset], %[offset]    \n\t"
+    "beq          %[loop_end], %[out],    0f           \n\t"
+  "2:                                                  \n\t"
+    "lbux         %[temp0],    %[offset](%[a])         \n\t"
+    "lbux         %[temp1],    %[offset](%[r])         \n\t"
+    "lbux         %[temp2],    %[offset](%[g])         \n\t"
+    "lbux         %[temp3],    %[offset](%[b])         \n\t"
+    "ins          %[temp1],    %[temp0],  16,     16   \n\t"
+    "ins          %[temp3],    %[temp2],  16,     16   \n\t"
+    "addiu        %[out],      %[out],    4            \n\t"
+    "precr.qb.ph  %[temp0],    %[temp1],  %[temp3]     \n\t"
+    "sw           %[temp0],    -4(%[out])              \n\t"
+    "addu         %[offset],   %[offset], %[step]      \n\t"
+    "bne          %[loop_end], %[out],    2b           \n\t"
+  "0:                                                  \n\t"
+    "beq          %[rest],     $zero,     1f           \n\t"
+    "lbux         %[temp0],    %[offset](%[a])         \n\t"
+    "lbux         %[temp1],    %[offset](%[r])         \n\t"
+    "lbux         %[temp2],    %[offset](%[g])         \n\t"
+    "lbux         %[temp3],    %[offset](%[b])         \n\t"
+    "ins          %[temp1],    %[temp0],  16,     16   \n\t"
+    "ins          %[temp3],    %[temp2],  16,     16   \n\t"
+    "precr.qb.ph  %[temp0],    %[temp1],  %[temp3]     \n\t"
+    "sw           %[temp0],    0(%[out])               \n\t"
+  "1:                                                  \n\t"
+    : [temp0]"=&r"(temp0), [temp1]"=&r"(temp1), [temp2]"=&r"(temp2),
+      [temp3]"=&r"(temp3), [offset]"=&r"(offset), [out]"+&r"(out)
+    : [a]"r"(a), [r]"r"(r), [g]"r"(g), [b]"r"(b), [step]"r"(step),
+      [loop_end]"r"(loop_end), [rest]"r"(rest)
+    : "memory"
+  );
+}
+#endif  // WORDS_BIGENDIAN
+
+static void PackRGB_MIPSdspR2(const uint8_t* r, const uint8_t* g,
+                              const uint8_t* b, int len, int step,
+                              uint32_t* out) {
+  int temp0, temp1, temp2, offset;
+  const int rest = len & 1;
+  const int a = 0xff;
+  const uint32_t* const loop_end = out + len - rest;
+  __asm__ volatile (
+    "xor          %[offset],   %[offset], %[offset]    \n\t"
+    "beq          %[loop_end], %[out],    0f           \n\t"
+  "2:                                                  \n\t"
+    "lbux         %[temp0],    %[offset](%[r])         \n\t"
+    "lbux         %[temp1],    %[offset](%[g])         \n\t"
+    "lbux         %[temp2],    %[offset](%[b])         \n\t"
+    "ins          %[temp0],    %[a],      16,     16   \n\t"
+    "ins          %[temp2],    %[temp1],  16,     16   \n\t"
+    "addiu        %[out],      %[out],    4            \n\t"
+    "precr.qb.ph  %[temp0],    %[temp0],  %[temp2]     \n\t"
+    "sw           %[temp0],    -4(%[out])              \n\t"
+    "addu         %[offset],   %[offset], %[step]      \n\t"
+    "bne          %[loop_end], %[out],    2b           \n\t"
+  "0:                                                  \n\t"
+    "beq          %[rest],     $zero,     1f           \n\t"
+    "lbux         %[temp0],    %[offset](%[r])         \n\t"
+    "lbux         %[temp1],    %[offset](%[g])         \n\t"
+    "lbux         %[temp2],    %[offset](%[b])         \n\t"
+    "ins          %[temp0],    %[a],      16,     16   \n\t"
+    "ins          %[temp2],    %[temp1],  16,     16   \n\t"
+    "precr.qb.ph  %[temp0],    %[temp0],  %[temp2]     \n\t"
+    "sw           %[temp0],    0(%[out])               \n\t"
+  "1:                                                  \n\t"
+    : [temp0]"=&r"(temp0), [temp1]"=&r"(temp1), [temp2]"=&r"(temp2),
+      [offset]"=&r"(offset), [out]"+&r"(out)
+    : [a]"r"(a), [r]"r"(r), [g]"r"(g), [b]"r"(b), [step]"r"(step),
+      [loop_end]"r"(loop_end), [rest]"r"(rest)
+    : "memory"
+  );
+}
+
 //------------------------------------------------------------------------------
 // Entry point
 
 extern void WebPInitAlphaProcessingMIPSdspR2(void);
 
 WEBP_TSAN_IGNORE_FUNCTION void WebPInitAlphaProcessingMIPSdspR2(void) {
-  WebPDispatchAlpha = DispatchAlpha;
-  WebPMultARGBRow = MultARGBRow;
+  WebPDispatchAlpha = DispatchAlpha_MIPSdspR2;
+  WebPMultARGBRow = MultARGBRow_MIPSdspR2;
+#ifdef WORDS_BIGENDIAN
+  WebPPackARGB = PackARGB_MIPSdspR2;
+#endif
+  WebPPackRGB = PackRGB_MIPSdspR2;
 }
 
 #else  // !WEBP_USE_MIPS_DSP_R2

src/dsp/alpha_processing_neon.c

@@ -11,11 +11,11 @@
 //
 // Author: Skal (pascal.massimino@gmail.com)
 
-#include "./dsp.h"
+#include "src/dsp/dsp.h"
 
 #if defined(WEBP_USE_NEON)
 
-#include "./neon.h"
+#include "src/dsp/neon.h"
 
 //------------------------------------------------------------------------------
 

src/dsp/alpha_processing_sse2.c

@@ -11,16 +11,16 @@
 //
 // Author: Skal (pascal.massimino@gmail.com)
 
-#include "./dsp.h"
+#include "src/dsp/dsp.h"
 
 #if defined(WEBP_USE_SSE2)
 #include <emmintrin.h>
 
 //------------------------------------------------------------------------------
 
-static int DispatchAlpha(const uint8_t* alpha, int alpha_stride,
-                         int width, int height,
-                         uint8_t* dst, int dst_stride) {
+static int DispatchAlpha_SSE2(const uint8_t* alpha, int alpha_stride,
+                              int width, int height,
+                              uint8_t* dst, int dst_stride) {
   // alpha_and stores an 'and' operation of all the alpha[] values. The final
   // value is not 0xff if any of the alpha[] is not equal to 0xff.
   uint32_t alpha_and = 0xff;
@@ -72,9 +72,9 @@ static int DispatchAlpha(const uint8_t* alpha, int alpha_stride,
   return (alpha_and != 0xff);
 }
 
-static void DispatchAlphaToGreen(const uint8_t* alpha, int alpha_stride,
-                                 int width, int height,
-                                 uint32_t* dst, int dst_stride) {
+static void DispatchAlphaToGreen_SSE2(const uint8_t* alpha, int alpha_stride,
+                                      int width, int height,
+                                      uint32_t* dst, int dst_stride) {
   int i, j;
   const __m128i zero = _mm_setzero_si128();
   const int limit = width & ~15;
@@ -98,9 +98,9 @@ static void DispatchAlphaToGreen(const uint8_t* alpha, int alpha_stride,
   }
 }
 
-static int ExtractAlpha(const uint8_t* argb, int argb_stride,
-                        int width, int height,
-                        uint8_t* alpha, int alpha_stride) {
+static int ExtractAlpha_SSE2(const uint8_t* argb, int argb_stride,
+                             int width, int height,
+                             uint8_t* alpha, int alpha_stride) {
   // alpha_and stores an 'and' operation of all the alpha[] values. The final
   // value is not 0xff if any of the alpha[] is not equal to 0xff.
   uint32_t alpha_and = 0xff;
@@ -210,6 +210,61 @@ static void ApplyAlphaMultiply_SSE2(uint8_t* rgba, int alpha_first,
 #undef MULTIPLIER
 #undef PREMULTIPLY
 
+//------------------------------------------------------------------------------
+// Alpha detection
+
+static int HasAlpha8b_SSE2(const uint8_t* src, int length) {
+  const __m128i all_0xff = _mm_set1_epi8(0xff);
+  int i = 0;
+  for (; i + 16 <= length; i += 16) {
+    const __m128i v = _mm_loadu_si128((const __m128i*)(src + i));
+    const __m128i bits = _mm_cmpeq_epi8(v, all_0xff);
+    const int mask = _mm_movemask_epi8(bits);
+    if (mask != 0xffff) return 1;
+  }
+  for (; i < length; ++i) if (src[i] != 0xff) return 1;
+  return 0;
+}
+
+static int HasAlpha32b_SSE2(const uint8_t* src, int length) {
+  const __m128i alpha_mask = _mm_set1_epi32(0xff);
+  const __m128i all_0xff = _mm_set1_epi8(0xff);
+  int i = 0;
+  // We don't know if we can access the last 3 bytes after the last alpha
+  // value 'src[4 * length - 4]' (because we don't know if alpha is the first
+  // or the last byte of the quadruplet). Hence the '-3' protection below.
+  length = length * 4 - 3;   // size in bytes
+  for (; i + 64 <= length; i += 64) {
+    const __m128i a0 = _mm_loadu_si128((const __m128i*)(src + i +  0));
+    const __m128i a1 = _mm_loadu_si128((const __m128i*)(src + i + 16));
+    const __m128i a2 = _mm_loadu_si128((const __m128i*)(src + i + 32));
+    const __m128i a3 = _mm_loadu_si128((const __m128i*)(src + i + 48));
+    const __m128i b0 = _mm_and_si128(a0, alpha_mask);
+    const __m128i b1 = _mm_and_si128(a1, alpha_mask);
+    const __m128i b2 = _mm_and_si128(a2, alpha_mask);
+    const __m128i b3 = _mm_and_si128(a3, alpha_mask);
+    const __m128i c0 = _mm_packs_epi32(b0, b1);
+    const __m128i c1 = _mm_packs_epi32(b2, b3);
+    const __m128i d  = _mm_packus_epi16(c0, c1);
+    const __m128i bits = _mm_cmpeq_epi8(d, all_0xff);
+    const int mask = _mm_movemask_epi8(bits);
+    if (mask != 0xffff) return 1;
+  }
+  for (; i + 32 <= length; i += 32) {
+    const __m128i a0 = _mm_loadu_si128((const __m128i*)(src + i +  0));
+    const __m128i a1 = _mm_loadu_si128((const __m128i*)(src + i + 16));
+    const __m128i b0 = _mm_and_si128(a0, alpha_mask);
+    const __m128i b1 = _mm_and_si128(a1, alpha_mask);
+    const __m128i c  = _mm_packs_epi32(b0, b1);
+    const __m128i d  = _mm_packus_epi16(c, c);
+    const __m128i bits = _mm_cmpeq_epi8(d, all_0xff);
+    const int mask = _mm_movemask_epi8(bits);
+    if (mask != 0xffff) return 1;
+  }
+  for (; i <= length; i += 4) if (src[i] != 0xff) return 1;
+  return 0;
+}
+
 // -----------------------------------------------------------------------------
 // Apply alpha value to rows
 
@@ -238,7 +293,7 @@ static void MultARGBRow_SSE2(uint32_t* const ptr, int width, int inverse) {
     }
   }
   width -= x;
-  if (width > 0) WebPMultARGBRowC(ptr + x, width, inverse);
+  if (width > 0) WebPMultARGBRow_C(ptr + x, width, inverse);
 }
 
 static void MultRow_SSE2(uint8_t* const ptr, const uint8_t* const alpha,
@@ -261,7 +316,7 @@ static void MultRow_SSE2(uint8_t* const ptr, const uint8_t* const alpha,
     }
   }
   width -= x;
-  if (width > 0) WebPMultRowC(ptr + x, alpha + x, width, inverse);
+  if (width > 0) WebPMultRow_C(ptr + x, alpha + x, width, inverse);
 }
 
 //------------------------------------------------------------------------------
@@ -273,9 +328,12 @@ WEBP_TSAN_IGNORE_FUNCTION void WebPInitAlphaProcessingSSE2(void) {
   WebPMultARGBRow = MultARGBRow_SSE2;
   WebPMultRow = MultRow_SSE2;
   WebPApplyAlphaMultiply = ApplyAlphaMultiply_SSE2;
-  WebPDispatchAlpha = DispatchAlpha;
-  WebPDispatchAlphaToGreen = DispatchAlphaToGreen;
-  WebPExtractAlpha = ExtractAlpha;
+  WebPDispatchAlpha = DispatchAlpha_SSE2;
+  WebPDispatchAlphaToGreen = DispatchAlphaToGreen_SSE2;
+  WebPExtractAlpha = ExtractAlpha_SSE2;
+
+  WebPHasAlpha8b = HasAlpha8b_SSE2;
+  WebPHasAlpha32b = HasAlpha32b_SSE2;
 }
 
 #else  // !WEBP_USE_SSE2

src/dsp/alpha_processing_sse41.c

@@ -11,7 +11,7 @@
 //
 // Author: Skal (pascal.massimino@gmail.com)
 
-#include "./dsp.h"
+#include "src/dsp/dsp.h"
 
 #if defined(WEBP_USE_SSE41)
 
@@ -19,9 +19,9 @@
 
 //------------------------------------------------------------------------------
 
-static int ExtractAlpha(const uint8_t* argb, int argb_stride,
-                        int width, int height,
-                        uint8_t* alpha, int alpha_stride) {
+static int ExtractAlpha_SSE41(const uint8_t* argb, int argb_stride,
+                              int width, int height,
+                              uint8_t* alpha, int alpha_stride) {
   // alpha_and stores an 'and' operation of all the alpha[] values. The final
   // value is not 0xff if any of the alpha[] is not equal to 0xff.
   uint32_t alpha_and = 0xff;
@@ -82,7 +82,7 @@ static int ExtractAlpha(const uint8_t* argb, int argb_stride,
 extern void WebPInitAlphaProcessingSSE41(void);
 
 WEBP_TSAN_IGNORE_FUNCTION void WebPInitAlphaProcessingSSE41(void) {
-  WebPExtractAlpha = ExtractAlpha;
+  WebPExtractAlpha = ExtractAlpha_SSE41;
 }
 
 #else  // !WEBP_USE_SSE41

src/dsp/argb.c

@@ -1,68 +0,0 @@
-// Copyright 2014 Google Inc. All Rights Reserved.
-//
-// Use of this source code is governed by a BSD-style license
-// that can be found in the COPYING file in the root of the source
-// tree. An additional intellectual property rights grant can be found
-// in the file PATENTS. All contributing project authors may
-// be found in the AUTHORS file in the root of the source tree.
-// -----------------------------------------------------------------------------
-//
-//   ARGB making functions.
-//
-// Author: Djordje Pesut (djordje.pesut@imgtec.com)
-
-#include "./dsp.h"
-
-static WEBP_INLINE uint32_t MakeARGB32(int a, int r, int g, int b) {
-  return (((uint32_t)a << 24) | (r << 16) | (g << 8) | b);
-}
-
-static void PackARGB(const uint8_t* a, const uint8_t* r, const uint8_t* g,
-                     const uint8_t* b, int len, uint32_t* out) {
-  int i;
-  for (i = 0; i < len; ++i) {
-    out[i] = MakeARGB32(a[4 * i], r[4 * i], g[4 * i], b[4 * i]);
-  }
-}
-
-static void PackRGB(const uint8_t* r, const uint8_t* g, const uint8_t* b,
-                    int len, int step, uint32_t* out) {
-  int i, offset = 0;
-  for (i = 0; i < len; ++i) {
-    out[i] = MakeARGB32(0xff, r[offset], g[offset], b[offset]);
-    offset += step;
-  }
-}
-
-void (*VP8PackARGB)(const uint8_t*, const uint8_t*, const uint8_t*,
-                    const uint8_t*, int, uint32_t*);
-void (*VP8PackRGB)(const uint8_t*, const uint8_t*, const uint8_t*,
-                   int, int, uint32_t*);
-
-extern void VP8EncDspARGBInitMIPSdspR2(void);
-extern void VP8EncDspARGBInitSSE2(void);
-
-static volatile VP8CPUInfo argb_last_cpuinfo_used =
-    (VP8CPUInfo)&argb_last_cpuinfo_used;
-
-WEBP_TSAN_IGNORE_FUNCTION void VP8EncDspARGBInit(void) {
-  if (argb_last_cpuinfo_used == VP8GetCPUInfo) return;
-
-  VP8PackARGB = PackARGB;
-  VP8PackRGB = PackRGB;
-
-  // If defined, use CPUInfo() to overwrite some pointers with faster versions.
-  if (VP8GetCPUInfo != NULL) {
-#if defined(WEBP_USE_SSE2)
-    if (VP8GetCPUInfo(kSSE2)) {
-      VP8EncDspARGBInitSSE2();
-    }
-#endif
-#if defined(WEBP_USE_MIPS_DSP_R2)
-    if (VP8GetCPUInfo(kMIPSdspR2)) {
-      VP8EncDspARGBInitMIPSdspR2();
-    }
-#endif
-  }
-  argb_last_cpuinfo_used = VP8GetCPUInfo;
-}

src/dsp/argb_mips_dsp_r2.c

@@ -1,110 +0,0 @@
-// Copyright 2014 Google Inc. All Rights Reserved.
-//
-// Use of this source code is governed by a BSD-style license
-// that can be found in the COPYING file in the root of the source
-// tree. An additional intellectual property rights grant can be found
-// in the file PATENTS. All contributing project authors may
-// be found in the AUTHORS file in the root of the source tree.
-// -----------------------------------------------------------------------------
-//
-//   ARGB making functions (mips version).
-//
-// Author: Djordje Pesut (djordje.pesut@imgtec.com)
-
-#include "./dsp.h"
-
-#if defined(WEBP_USE_MIPS_DSP_R2)
-
-static void PackARGB(const uint8_t* a, const uint8_t* r, const uint8_t* g,
-                     const uint8_t* b, int len, uint32_t* out) {
-  int temp0, temp1, temp2, temp3, offset;
-  const int rest = len & 1;
-  const uint32_t* const loop_end = out + len - rest;
-  const int step = 4;
-  __asm__ volatile (
-    "xor          %[offset],   %[offset], %[offset]    \n\t"
-    "beq          %[loop_end], %[out],    0f           \n\t"
-  "2:                                                  \n\t"
-    "lbux         %[temp0],    %[offset](%[a])         \n\t"
-    "lbux         %[temp1],    %[offset](%[r])         \n\t"
-    "lbux         %[temp2],    %[offset](%[g])         \n\t"
-    "lbux         %[temp3],    %[offset](%[b])         \n\t"
-    "ins          %[temp1],    %[temp0],  16,     16   \n\t"
-    "ins          %[temp3],    %[temp2],  16,     16   \n\t"
-    "addiu        %[out],      %[out],    4            \n\t"
-    "precr.qb.ph  %[temp0],    %[temp1],  %[temp3]     \n\t"
-    "sw           %[temp0],    -4(%[out])              \n\t"
-    "addu         %[offset],   %[offset], %[step]      \n\t"
-    "bne          %[loop_end], %[out],    2b           \n\t"
-  "0:                                                  \n\t"
-    "beq          %[rest],     $zero,     1f           \n\t"
-    "lbux         %[temp0],    %[offset](%[a])         \n\t"
-    "lbux         %[temp1],    %[offset](%[r])         \n\t"
-    "lbux         %[temp2],    %[offset](%[g])         \n\t"
-    "lbux         %[temp3],    %[offset](%[b])         \n\t"
-    "ins          %[temp1],    %[temp0],  16,     16   \n\t"
-    "ins          %[temp3],    %[temp2],  16,     16   \n\t"
-    "precr.qb.ph  %[temp0],    %[temp1],  %[temp3]     \n\t"
-    "sw           %[temp0],    0(%[out])               \n\t"
-  "1:                                                  \n\t"
-    : [temp0]"=&r"(temp0), [temp1]"=&r"(temp1), [temp2]"=&r"(temp2),
-      [temp3]"=&r"(temp3), [offset]"=&r"(offset), [out]"+&r"(out)
-    : [a]"r"(a), [r]"r"(r), [g]"r"(g), [b]"r"(b), [step]"r"(step),
-      [loop_end]"r"(loop_end), [rest]"r"(rest)
-    : "memory"
-  );
-}
-
-static void PackRGB(const uint8_t* r, const uint8_t* g, const uint8_t* b,
-                    int len, int step, uint32_t* out) {
-  int temp0, temp1, temp2, offset;
-  const int rest = len & 1;
-  const int a = 0xff;
-  const uint32_t* const loop_end = out + len - rest;
-  __asm__ volatile (
-    "xor          %[offset],   %[offset], %[offset]    \n\t"
-    "beq          %[loop_end], %[out],    0f           \n\t"
-  "2:                                                  \n\t"
-    "lbux         %[temp0],    %[offset](%[r])         \n\t"
-    "lbux         %[temp1],    %[offset](%[g])         \n\t"
-    "lbux         %[temp2],    %[offset](%[b])         \n\t"
-    "ins          %[temp0],    %[a],      16,     16   \n\t"
-    "ins          %[temp2],    %[temp1],  16,     16   \n\t"
-    "addiu        %[out],      %[out],    4            \n\t"
-    "precr.qb.ph  %[temp0],    %[temp0],  %[temp2]     \n\t"
-    "sw           %[temp0],    -4(%[out])              \n\t"
-    "addu         %[offset],   %[offset], %[step]      \n\t"
-    "bne          %[loop_end], %[out],    2b           \n\t"
-  "0:                                                  \n\t"
-    "beq          %[rest],     $zero,     1f           \n\t"
-    "lbux         %[temp0],    %[offset](%[r])         \n\t"
-    "lbux         %[temp1],    %[offset](%[g])         \n\t"
-    "lbux         %[temp2],    %[offset](%[b])         \n\t"
-    "ins          %[temp0],    %[a],      16,     16   \n\t"
-    "ins          %[temp2],    %[temp1],  16,     16   \n\t"
-    "precr.qb.ph  %[temp0],    %[temp0],  %[temp2]     \n\t"
-    "sw           %[temp0],    0(%[out])               \n\t"
-  "1:                                                  \n\t"
-    : [temp0]"=&r"(temp0), [temp1]"=&r"(temp1), [temp2]"=&r"(temp2),
-      [offset]"=&r"(offset), [out]"+&r"(out)
-    : [a]"r"(a), [r]"r"(r), [g]"r"(g), [b]"r"(b), [step]"r"(step),
-      [loop_end]"r"(loop_end), [rest]"r"(rest)
-    : "memory"
-  );
-}
-
-//------------------------------------------------------------------------------
-// Entry point
-
-extern void VP8EncDspARGBInitMIPSdspR2(void);
-
-WEBP_TSAN_IGNORE_FUNCTION void VP8EncDspARGBInitMIPSdspR2(void) {
-  VP8PackARGB = PackARGB;
-  VP8PackRGB = PackRGB;
-}
-
-#else  // !WEBP_USE_MIPS_DSP_R2
-
-WEBP_DSP_INIT_STUB(VP8EncDspARGBInitMIPSdspR2)
-
-#endif  // WEBP_USE_MIPS_DSP_R2

src/dsp/argb_sse2.c

@@ -1,53 +0,0 @@
-// Copyright 2014 Google Inc. All Rights Reserved.
-//
-// Use of this source code is governed by a BSD-style license
-// that can be found in the COPYING file in the root of the source
-// tree. An additional intellectual property rights grant can be found
-// in the file PATENTS. All contributing project authors may
-// be found in the AUTHORS file in the root of the source tree.
-// -----------------------------------------------------------------------------
-//
-//   ARGB making functions (SSE2 version).
-//
-// Author: Skal (pascal.massimino@gmail.com)
-
-#include "./dsp.h"
-#include "./lossless.h"
-
-#if defined(WEBP_USE_SSE2)
-
-#include <assert.h>
-#include <emmintrin.h>
-#include <string.h>
-
-static void PackARGB(const uint8_t* a, const uint8_t* r, const uint8_t* g,
-                     const uint8_t* b, int len, uint32_t* out) {
-  (void)a;
-  if (g == r + 1) {  // RGBA input order. Need to swap R and B.
-    assert(b == r + 2);
-    assert(a == r + 3);
-    VP8LConvertBGRAToRGBA((const uint32_t*)r, len, (uint8_t*)out);
-  } else {
-    assert(g == b + 1);
-    assert(r == b + 2);
-    assert(a == b + 3);
-    memcpy(out, b, len * 4);
-  }
-}
-
-//------------------------------------------------------------------------------
-// Entry point
-
-extern void VP8EncDspARGBInitSSE2(void);
-extern void VP8LDspInitSSE2(void);
-
-WEBP_TSAN_IGNORE_FUNCTION void VP8EncDspARGBInitSSE2(void) {
-  VP8LDspInitSSE2();
-  VP8PackARGB = PackARGB;
-}
-
-#else  // !WEBP_USE_SSE2
-
-WEBP_DSP_INIT_STUB(VP8EncDspARGBInitSSE2)
-
-#endif  // WEBP_USE_SSE2

src/dsp/common_sse2.h

@@ -128,9 +128,9 @@ static WEBP_INLINE void VP8Transpose_2_4x4_16b(
 // Pack the planar buffers
 // rrrr... rrrr... gggg... gggg... bbbb... bbbb....
 // triplet by triplet in the output buffer rgb as rgbrgbrgbrgb ...
-static WEBP_INLINE void VP8PlanarTo24b(__m128i* const in0, __m128i* const in1,
-                                       __m128i* const in2, __m128i* const in3,
-                                       __m128i* const in4, __m128i* const in5) {
+static WEBP_INLINE void VP8PlanarTo24b_SSE2(
+    __m128i* const in0, __m128i* const in1, __m128i* const in2,
+    __m128i* const in3, __m128i* const in4, __m128i* const in5) {
   // The input is 6 registers of sixteen 8b but for the sake of explanation,
   // let's take 6 registers of four 8b values.
   // To pack, we will keep taking one every two 8b integer and move it
@@ -159,10 +159,10 @@ static WEBP_INLINE void VP8PlanarTo24b(__m128i* const in0, __m128i* const in1,
 
 // Convert four packed four-channel buffers like argbargbargbargb... into the
 // split channels aaaaa ... rrrr ... gggg .... bbbbb ......
-static WEBP_INLINE void VP8L32bToPlanar(__m128i* const in0,
-                                        __m128i* const in1,
-                                        __m128i* const in2,
-                                        __m128i* const in3) {
+static WEBP_INLINE void VP8L32bToPlanar_SSE2(__m128i* const in0,
+                                             __m128i* const in1,
+                                             __m128i* const in2,
+                                             __m128i* const in3) {
   // Column-wise transpose.
   const __m128i A0 = _mm_unpacklo_epi8(*in0, *in1);
   const __m128i A1 = _mm_unpackhi_epi8(*in0, *in1);

src/dsp/common_sse41.h

@@ -0,0 +1,132 @@
+// Copyright 2016 Google Inc. All Rights Reserved.
+//
+// Use of this source code is governed by a BSD-style license
+// that can be found in the COPYING file in the root of the source
+// tree. An additional intellectual property rights grant can be found
+// in the file PATENTS. All contributing project authors may
+// be found in the AUTHORS file in the root of the source tree.
+// -----------------------------------------------------------------------------
+//
+// SSE4 code common to several files.
+//
+// Author: Vincent Rabaud (vrabaud@google.com)
+
+#ifndef WEBP_DSP_COMMON_SSE41_H_
+#define WEBP_DSP_COMMON_SSE41_H_
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#if defined(WEBP_USE_SSE41)
+#include <smmintrin.h>
+
+//------------------------------------------------------------------------------
+// Channel mixing.
+// Shuffles the input buffer as A0 0 0 A1 0 0 A2 ...
+#define WEBP_SSE41_SHUFF(OUT, IN0, IN1)    \
+  OUT##0 = _mm_shuffle_epi8(*IN0, shuff0); \
+  OUT##1 = _mm_shuffle_epi8(*IN0, shuff1); \
+  OUT##2 = _mm_shuffle_epi8(*IN0, shuff2); \
+  OUT##3 = _mm_shuffle_epi8(*IN1, shuff0); \
+  OUT##4 = _mm_shuffle_epi8(*IN1, shuff1); \
+  OUT##5 = _mm_shuffle_epi8(*IN1, shuff2);
+
+// Pack the planar buffers
+// rrrr... rrrr... gggg... gggg... bbbb... bbbb....
+// triplet by triplet in the output buffer rgb as rgbrgbrgbrgb ...
+static WEBP_INLINE void VP8PlanarTo24b_SSE41(
+    __m128i* const in0, __m128i* const in1, __m128i* const in2,
+    __m128i* const in3, __m128i* const in4, __m128i* const in5) {
+  __m128i R0, R1, R2, R3, R4, R5;
+  __m128i G0, G1, G2, G3, G4, G5;
+  __m128i B0, B1, B2, B3, B4, B5;
+
+  // Process R.
+  {
+    const __m128i shuff0 = _mm_set_epi8(
+        5, -1, -1, 4, -1, -1, 3, -1, -1, 2, -1, -1, 1, -1, -1, 0);
+    const __m128i shuff1 = _mm_set_epi8(
+        -1, 10, -1, -1, 9, -1, -1, 8, -1, -1, 7, -1, -1, 6, -1, -1);
+    const __m128i shuff2 = _mm_set_epi8(
+     -1, -1, 15, -1, -1, 14, -1, -1, 13, -1, -1, 12, -1, -1, 11, -1);
+    WEBP_SSE41_SHUFF(R, in0, in1)
+  }
+
+  // Process G.
+  {
+    // Same as before, just shifted to the left by one and including the right
+    // padding.
+    const __m128i shuff0 = _mm_set_epi8(
+        -1, -1, 4, -1, -1, 3, -1, -1, 2, -1, -1, 1, -1, -1, 0, -1);
+    const __m128i shuff1 = _mm_set_epi8(
+        10, -1, -1, 9, -1, -1, 8, -1, -1, 7, -1, -1, 6, -1, -1, 5);
+    const __m128i shuff2 = _mm_set_epi8(
+     -1, 15, -1, -1, 14, -1, -1, 13, -1, -1, 12, -1, -1, 11, -1, -1);
+    WEBP_SSE41_SHUFF(G, in2, in3)
+  }
+
+  // Process B.
+  {
+    const __m128i shuff0 = _mm_set_epi8(
+        -1, 4, -1, -1, 3, -1, -1, 2, -1, -1, 1, -1, -1, 0, -1, -1);
+    const __m128i shuff1 = _mm_set_epi8(
+        -1, -1, 9, -1, -1, 8, -1, -1, 7, -1, -1, 6, -1, -1, 5, -1);
+    const __m128i shuff2 = _mm_set_epi8(
+      15, -1, -1, 14, -1, -1, 13, -1, -1, 12, -1, -1, 11, -1, -1, 10);
+    WEBP_SSE41_SHUFF(B, in4, in5)
+  }
+
+  // OR the different channels.
+  {
+    const __m128i RG0 = _mm_or_si128(R0, G0);
+    const __m128i RG1 = _mm_or_si128(R1, G1);
+    const __m128i RG2 = _mm_or_si128(R2, G2);
+    const __m128i RG3 = _mm_or_si128(R3, G3);
+    const __m128i RG4 = _mm_or_si128(R4, G4);
+    const __m128i RG5 = _mm_or_si128(R5, G5);
+    *in0 = _mm_or_si128(RG0, B0);
+    *in1 = _mm_or_si128(RG1, B1);
+    *in2 = _mm_or_si128(RG2, B2);
+    *in3 = _mm_or_si128(RG3, B3);
+    *in4 = _mm_or_si128(RG4, B4);
+    *in5 = _mm_or_si128(RG5, B5);
+  }
+}
+
+#undef WEBP_SSE41_SHUFF
+
+// Convert four packed four-channel buffers like argbargbargbargb... into the
+// split channels aaaaa ... rrrr ... gggg .... bbbbb ......
+static WEBP_INLINE void VP8L32bToPlanar_SSE41(__m128i* const in0,
+                                              __m128i* const in1,
+                                              __m128i* const in2,
+                                              __m128i* const in3) {
+  // aaaarrrrggggbbbb
+  const __m128i shuff0 =
+      _mm_set_epi8(15, 11, 7, 3, 14, 10, 6, 2, 13, 9, 5, 1, 12, 8, 4, 0);
+  const __m128i A0 = _mm_shuffle_epi8(*in0, shuff0);
+  const __m128i A1 = _mm_shuffle_epi8(*in1, shuff0);
+  const __m128i A2 = _mm_shuffle_epi8(*in2, shuff0);
+  const __m128i A3 = _mm_shuffle_epi8(*in3, shuff0);
+  // A0A1R0R1
+  // G0G1B0B1
+  // A2A3R2R3
+  // G0G1B0B1
+  const __m128i B0 = _mm_unpacklo_epi32(A0, A1);
+  const __m128i B1 = _mm_unpackhi_epi32(A0, A1);
+  const __m128i B2 = _mm_unpacklo_epi32(A2, A3);
+  const __m128i B3 = _mm_unpackhi_epi32(A2, A3);
+  *in3 = _mm_unpacklo_epi64(B0, B2);
+  *in2 = _mm_unpackhi_epi64(B0, B2);
+  *in1 = _mm_unpacklo_epi64(B1, B3);
+  *in0 = _mm_unpackhi_epi64(B1, B3);
+}
+
+#endif  // WEBP_USE_SSE41
+
+#ifdef __cplusplus
+}  // extern "C"
+#endif
+
+#endif  // WEBP_DSP_COMMON_SSE41_H_

src/dsp/cost.c

@@ -9,8 +9,8 @@
 //
 // Author: Skal (pascal.massimino@gmail.com)
 
-#include "./dsp.h"
-#include "../enc/cost_enc.h"
+#include "src/dsp/dsp.h"
+#include "src/enc/cost_enc.h"
 
 //------------------------------------------------------------------------------
 // Boolean-cost cost table
@@ -319,7 +319,7 @@ const uint8_t VP8EncBands[16 + 1] = {
 //------------------------------------------------------------------------------
 // Mode costs
 
-static int GetResidualCost(int ctx0, const VP8Residual* const res) {
+static int GetResidualCost_C(int ctx0, const VP8Residual* const res) {
   int n = res->first;
   // should be prob[VP8EncBands[n]], but it's equivalent for n=0 or 1
   const int p0 = res->prob[n][ctx0][0];
@@ -354,8 +354,8 @@ static int GetResidualCost(int ctx0, const VP8Residual* const res) {
   return cost;
 }
 
-static void SetResidualCoeffs(const int16_t* const coeffs,
-                              VP8Residual* const res) {
+static void SetResidualCoeffs_C(const int16_t* const coeffs,
+                                VP8Residual* const res) {
   int n;
   res->last = -1;
   assert(res->first == 0 || coeffs[0] == 0);
@@ -384,8 +384,8 @@ static volatile VP8CPUInfo cost_last_cpuinfo_used =
 WEBP_TSAN_IGNORE_FUNCTION void VP8EncDspCostInit(void) {
   if (cost_last_cpuinfo_used == VP8GetCPUInfo) return;
 
-  VP8GetResidualCost = GetResidualCost;
-  VP8SetResidualCoeffs = SetResidualCoeffs;
+  VP8GetResidualCost = GetResidualCost_C;
+  VP8SetResidualCoeffs = SetResidualCoeffs_C;
 
   // If defined, use CPUInfo() to overwrite some pointers with faster versions.
   if (VP8GetCPUInfo != NULL) {

src/dsp/cost_mips32.c

@@ -9,13 +9,13 @@
 //
 // Author: Djordje Pesut (djordje.pesut@imgtec.com)
 
-#include "./dsp.h"
+#include "src/dsp/dsp.h"
 
 #if defined(WEBP_USE_MIPS32)
 
-#include "../enc/cost_enc.h"
+#include "src/enc/cost_enc.h"
 
-static int GetResidualCost(int ctx0, const VP8Residual* const res) {
+static int GetResidualCost_MIPS32(int ctx0, const VP8Residual* const res) {
   int temp0, temp1;
   int v_reg, ctx_reg;
   int n = res->first;
@@ -96,8 +96,8 @@ static int GetResidualCost(int ctx0, const VP8Residual* const res) {
   return cost;
 }
 
-static void SetResidualCoeffs(const int16_t* const coeffs,
-                              VP8Residual* const res) {
+static void SetResidualCoeffs_MIPS32(const int16_t* const coeffs,
+                                     VP8Residual* const res) {
   const int16_t* p_coeffs = (int16_t*)coeffs;
   int temp0, temp1, temp2, n, n1;
   assert(res->first == 0 || coeffs[0] == 0);
@@ -143,8 +143,8 @@ static void SetResidualCoeffs(const int16_t* const coeffs,
 extern void VP8EncDspCostInitMIPS32(void);
 
 WEBP_TSAN_IGNORE_FUNCTION void VP8EncDspCostInitMIPS32(void) {
-  VP8GetResidualCost = GetResidualCost;
-  VP8SetResidualCoeffs = SetResidualCoeffs;
+  VP8GetResidualCost = GetResidualCost_MIPS32;
+  VP8SetResidualCoeffs = SetResidualCoeffs_MIPS32;
 }
 
 #else  // !WEBP_USE_MIPS32

src/dsp/cost_mips_dsp_r2.c

@@ -9,13 +9,13 @@
 //
 // Author: Djordje Pesut (djordje.pesut@imgtec.com)
 
-#include "./dsp.h"
+#include "src/dsp/dsp.h"
 
 #if defined(WEBP_USE_MIPS_DSP_R2)
 
-#include "../enc/cost_enc.h"
+#include "src/enc/cost_enc.h"
 
-static int GetResidualCost(int ctx0, const VP8Residual* const res) {
+static int GetResidualCost_MIPSdspR2(int ctx0, const VP8Residual* const res) {
   int temp0, temp1;
   int v_reg, ctx_reg;
   int n = res->first;
@@ -97,7 +97,7 @@ static int GetResidualCost(int ctx0, const VP8Residual* const res) {
 extern void VP8EncDspCostInitMIPSdspR2(void);
 
 WEBP_TSAN_IGNORE_FUNCTION void VP8EncDspCostInitMIPSdspR2(void) {
-  VP8GetResidualCost = GetResidualCost;
+  VP8GetResidualCost = GetResidualCost_MIPSdspR2;
 }
 
 #else  // !WEBP_USE_MIPS_DSP_R2

src/dsp/cost_sse2.c

@@ -11,19 +11,19 @@
 //
 // Author: Skal (pascal.massimino@gmail.com)
 
-#include "./dsp.h"
+#include "src/dsp/dsp.h"
 
 #if defined(WEBP_USE_SSE2)
 #include <emmintrin.h>
 
-#include "../enc/cost_enc.h"
-#include "../enc/vp8i_enc.h"
-#include "../utils/utils.h"
+#include "src/enc/cost_enc.h"
+#include "src/enc/vp8i_enc.h"
+#include "src/utils/utils.h"
 
 //------------------------------------------------------------------------------
 
-static void SetResidualCoeffsSSE2(const int16_t* const coeffs,
-                                  VP8Residual* const res) {
+static void SetResidualCoeffs_SSE2(const int16_t* const coeffs,
+                                   VP8Residual* const res) {
   const __m128i c0 = _mm_loadu_si128((const __m128i*)(coeffs + 0));
   const __m128i c1 = _mm_loadu_si128((const __m128i*)(coeffs + 8));
   // Use SSE2 to compare 16 values with a single instruction.
@@ -42,7 +42,7 @@ static void SetResidualCoeffsSSE2(const int16_t* const coeffs,
   res->coeffs = coeffs;
 }
 
-static int GetResidualCostSSE2(int ctx0, const VP8Residual* const res) {
+static int GetResidualCost_SSE2(int ctx0, const VP8Residual* const res) {
   uint8_t levels[16], ctxs[16];
   uint16_t abs_levels[16];
   int n = res->first;
@@ -108,8 +108,8 @@ static int GetResidualCostSSE2(int ctx0, const VP8Residual* const res) {
 extern void VP8EncDspCostInitSSE2(void);
 
 WEBP_TSAN_IGNORE_FUNCTION void VP8EncDspCostInitSSE2(void) {
-  VP8SetResidualCoeffs = SetResidualCoeffsSSE2;
-  VP8GetResidualCost = GetResidualCostSSE2;
+  VP8SetResidualCoeffs = SetResidualCoeffs_SSE2;
+  VP8GetResidualCost = GetResidualCost_SSE2;
 }
 
 #else  // !WEBP_USE_SSE2

src/dsp/cpu.c

@@ -11,7 +11,7 @@
 //
 // Author: Christian Duvivier (cduvivier@google.com)
 
-#include "./dsp.h"
+#include "src/dsp/dsp.h"
 
 #if defined(WEBP_HAVE_NEON_RTCD)
 #include <stdio.h>
@@ -23,13 +23,11 @@
 #endif
 
 //------------------------------------------------------------------------------
-// x86/x86-64 micro-arch detection.
+// SSE2 detection.
 //
 
-// skip x86 specific code for WASM builds
-#if defined(WEBP_USE_WASM)
 // apple/darwin gcc-4.0.1 defines __PIC__, but not __pic__ with -fPIC.
-#elif (defined(__pic__) || defined(__PIC__)) && defined(__i386__)
+#if (defined(__pic__) || defined(__PIC__)) && defined(__i386__)
 static WEBP_INLINE void GetCPUInfo(int cpu_info[4], int info_type) {
   __asm__ volatile (
     "mov %%ebx, %%edi\n"
@@ -65,10 +63,8 @@ static WEBP_INLINE void GetCPUInfo(int cpu_info[4], int info_type) {
 #define GetCPUInfo __cpuid
 #endif
 
-// skip xgetbv definition for WASM builds
-#if defined(WEBP_USE_WASM)
 // NaCl has no support for xgetbv or the raw opcode.
-#elif !defined(__native_client__) && (defined(__i386__) || defined(__x86_64__))
+#if !defined(__native_client__) && (defined(__i386__) || defined(__x86_64__))
 static WEBP_INLINE uint64_t xgetbv(void) {
   const uint32_t ecx = 0;
   uint32_t eax, edx;
@@ -98,19 +94,7 @@ static WEBP_INLINE uint64_t xgetbv(void) {
 #define xgetbv() 0U  // no AVX for older x64 or unrecognized toolchains.
 #endif
 
-//------------------------------------------------------------------------------
-// Platform specific VP8CPUInfo functions.
-//
-
-// WASM needs to precede platform specific architecture checks as the defines
-// will still be present when building this target.
-#if defined(WEBP_USE_WASM)
-static int wasmCPUInfo(CPUFeature feature) {
-  if (feature != kWASM) return 0;
-  return 1;
-}
-VP8CPUInfo VP8GetCPUInfo = wasmCPUInfo;
-#elif defined(__i386__) || defined(__x86_64__) || defined(WEBP_MSC_SSE2)
+#if defined(__i386__) || defined(__x86_64__) || defined(WEBP_MSC_SSE2)
 
 // helper function for run-time detection of slow SSSE3 platforms
 static int CheckSlowModel(int info) {
@@ -159,7 +143,7 @@ static int x86CPUInfo(CPUFeature feature) {
     return !!(cpu_info[2] & (1 << 0));
   }
   if (feature == kSlowSSSE3) {
-    if (is_intel && (cpu_info[2] & (1 << 0))) {   // SSSE3?
+    if (is_intel && (cpu_info[2] & (1 << 9))) {   // SSSE3?
       return CheckSlowModel(cpu_info[0]);
     }
     return 0;

src/dsp/dec.c

@@ -11,9 +11,11 @@
 //
 // Author: Skal (pascal.massimino@gmail.com)
 
-#include "./dsp.h"
-#include "../dec/vp8i_dec.h"
-#include "../utils/utils.h"
+#include <assert.h>
+
+#include "src/dsp/dsp.h"
+#include "src/dec/vp8i_dec.h"
+#include "src/utils/utils.h"
 
 //------------------------------------------------------------------------------
 
@@ -25,7 +27,7 @@ static WEBP_INLINE uint8_t clip_8b(int v) {
 // Transforms (Paragraph 14.4)
 
 #define STORE(x, y, v) \
-  dst[x + y * BPS] = clip_8b(dst[x + y * BPS] + ((v) >> 3))
+  dst[(x) + (y) * BPS] = clip_8b(dst[(x) + (y) * BPS] + ((v) >> 3))
 
 #define STORE2(y, dc, d, c) do {    \
   const int DC = (dc);              \
@@ -38,7 +40,8 @@ static WEBP_INLINE uint8_t clip_8b(int v) {
 #define MUL1(a) ((((a) * 20091) >> 16) + (a))
 #define MUL2(a) (((a) * 35468) >> 16)
 
-static void TransformOne(const int16_t* in, uint8_t* dst) {
+#if !WEBP_NEON_OMIT_C_CODE
+static void TransformOne_C(const int16_t* in, uint8_t* dst) {
   int C[4 * 4], *tmp;
   int i;
   tmp = C;
@@ -78,7 +81,7 @@ static void TransformOne(const int16_t* in, uint8_t* dst) {
 }
 
 // Simplified transform when only in[0], in[1] and in[4] are non-zero
-static void TransformAC3(const int16_t* in, uint8_t* dst) {
+static void TransformAC3_C(const int16_t* in, uint8_t* dst) {
   const int a = in[0] + 4;
   const int c4 = MUL2(in[4]);
   const int d4 = MUL1(in[4]);
@@ -93,19 +96,21 @@ static void TransformAC3(const int16_t* in, uint8_t* dst) {
 #undef MUL2
 #undef STORE2
 
-static void TransformTwo(const int16_t* in, uint8_t* dst, int do_two) {
-  TransformOne(in, dst);
+static void TransformTwo_C(const int16_t* in, uint8_t* dst, int do_two) {
+  TransformOne_C(in, dst);
   if (do_two) {
-    TransformOne(in + 16, dst + 4);
+    TransformOne_C(in + 16, dst + 4);
   }
 }
+#endif  // !WEBP_NEON_OMIT_C_CODE
 
-static void TransformUV(const int16_t* in, uint8_t* dst) {
+static void TransformUV_C(const int16_t* in, uint8_t* dst) {
   VP8Transform(in + 0 * 16, dst, 1);
   VP8Transform(in + 2 * 16, dst + 4 * BPS, 1);
 }
 
-static void TransformDC(const int16_t* in, uint8_t* dst) {
+#if !WEBP_NEON_OMIT_C_CODE
+static void TransformDC_C(const int16_t* in, uint8_t* dst) {
   const int DC = in[0] + 4;
   int i, j;
   for (j = 0; j < 4; ++j) {
@@ -114,8 +119,9 @@ static void TransformDC(const int16_t* in, uint8_t* dst) {
     }
   }
 }
+#endif  // !WEBP_NEON_OMIT_C_CODE
 
-static void TransformDCUV(const int16_t* in, uint8_t* dst) {
+static void TransformDCUV_C(const int16_t* in, uint8_t* dst) {
   if (in[0 * 16]) VP8TransformDC(in + 0 * 16, dst);
   if (in[1 * 16]) VP8TransformDC(in + 1 * 16, dst + 4);
   if (in[2 * 16]) VP8TransformDC(in + 2 * 16, dst + 4 * BPS);
@@ -127,7 +133,8 @@ static void TransformDCUV(const int16_t* in, uint8_t* dst) {
 //------------------------------------------------------------------------------
 // Paragraph 14.3
 
-static void TransformWHT(const int16_t* in, int16_t* out) {
+#if !WEBP_NEON_OMIT_C_CODE
+static void TransformWHT_C(const int16_t* in, int16_t* out) {
   int tmp[16];
   int i;
   for (i = 0; i < 4; ++i) {
@@ -153,6 +160,7 @@ static void TransformWHT(const int16_t* in, int16_t* out) {
     out += 64;
   }
 }
+#endif  // !WEBP_NEON_OMIT_C_CODE
 
 void (*VP8TransformWHT)(const int16_t* in, int16_t* out);
 
@@ -161,6 +169,7 @@ void (*VP8TransformWHT)(const int16_t* in, int16_t* out);
 
 #define DST(x, y) dst[(x) + (y) * BPS]
 
+#if !WEBP_NEON_OMIT_C_CODE
 static WEBP_INLINE void TrueMotion(uint8_t* dst, int size) {
   const uint8_t* top = dst - BPS;
   const uint8_t* const clip0 = VP8kclip1 - top[-1];
@@ -174,21 +183,21 @@ static WEBP_INLINE void TrueMotion(uint8_t* dst, int size) {
     dst += BPS;
   }
 }
-static void TM4(uint8_t* dst)   { TrueMotion(dst, 4); }
-static void TM8uv(uint8_t* dst) { TrueMotion(dst, 8); }
-static void TM16(uint8_t* dst)  { TrueMotion(dst, 16); }
+static void TM4_C(uint8_t* dst)   { TrueMotion(dst, 4); }
+static void TM8uv_C(uint8_t* dst) { TrueMotion(dst, 8); }
+static void TM16_C(uint8_t* dst)  { TrueMotion(dst, 16); }
 
 //------------------------------------------------------------------------------
 // 16x16
 
-static void VE16(uint8_t* dst) {     // vertical
+static void VE16_C(uint8_t* dst) {     // vertical
   int j;
   for (j = 0; j < 16; ++j) {
     memcpy(dst + j * BPS, dst - BPS, 16);
   }
 }
 
-static void HE16(uint8_t* dst) {     // horizontal
+static void HE16_C(uint8_t* dst) {     // horizontal
   int j;
   for (j = 16; j > 0; --j) {
     memset(dst, dst[-1], 16);
@@ -203,7 +212,7 @@ static WEBP_INLINE void Put16(int v, uint8_t* dst) {
   }
 }
 
-static void DC16(uint8_t* dst) {    // DC
+static void DC16_C(uint8_t* dst) {    // DC
   int DC = 16;
   int j;
   for (j = 0; j < 16; ++j) {
@@ -212,7 +221,7 @@ static void DC16(uint8_t* dst) {    // DC
   Put16(DC >> 5, dst);
 }
 
-static void DC16NoTop(uint8_t* dst) {   // DC with top samples not available
+static void DC16NoTop_C(uint8_t* dst) {   // DC with top samples not available
   int DC = 8;
   int j;
   for (j = 0; j < 16; ++j) {
@@ -221,7 +230,7 @@ static void DC16NoTop(uint8_t* dst) {   // DC with top samples not available
   Put16(DC >> 4, dst);
 }
 
-static void DC16NoLeft(uint8_t* dst) {  // DC with left samples not available
+static void DC16NoLeft_C(uint8_t* dst) {  // DC with left samples not available
   int DC = 8;
   int i;
   for (i = 0; i < 16; ++i) {
@@ -230,9 +239,10 @@ static void DC16NoLeft(uint8_t* dst) {  // DC with left samples not available
   Put16(DC >> 4, dst);
 }
 
-static void DC16NoTopLeft(uint8_t* dst) {  // DC with no top and left samples
+static void DC16NoTopLeft_C(uint8_t* dst) {  // DC with no top and left samples
   Put16(0x80, dst);
 }
+#endif  // !WEBP_NEON_OMIT_C_CODE
 
 VP8PredFunc VP8PredLuma16[NUM_B_DC_MODES];
 
@@ -242,7 +252,8 @@ VP8PredFunc VP8PredLuma16[NUM_B_DC_MODES];
 #define AVG3(a, b, c) ((uint8_t)(((a) + 2 * (b) + (c) + 2) >> 2))
 #define AVG2(a, b) (((a) + (b) + 1) >> 1)
 
-static void VE4(uint8_t* dst) {    // vertical
+#if !WEBP_NEON_OMIT_C_CODE
+static void VE4_C(uint8_t* dst) {    // vertical
   const uint8_t* top = dst - BPS;
   const uint8_t vals[4] = {
     AVG3(top[-1], top[0], top[1]),
@@ -255,8 +266,9 @@ static void VE4(uint8_t* dst) {    // vertical
     memcpy(dst + i * BPS, vals, sizeof(vals));
   }
 }
+#endif  // !WEBP_NEON_OMIT_C_CODE
 
-static void HE4(uint8_t* dst) {    // horizontal
+static void HE4_C(uint8_t* dst) {    // horizontal
   const int A = dst[-1 - BPS];
   const int B = dst[-1];
   const int C = dst[-1 + BPS];
@@ -268,7 +280,8 @@ static void HE4(uint8_t* dst) {    // horizontal
   WebPUint32ToMem(dst + 3 * BPS, 0x01010101U * AVG3(D, E, E));
 }
 
-static void DC4(uint8_t* dst) {   // DC
+#if !WEBP_NEON_OMIT_C_CODE
+static void DC4_C(uint8_t* dst) {   // DC
   uint32_t dc = 4;
   int i;
   for (i = 0; i < 4; ++i) dc += dst[i - BPS] + dst[-1 + i * BPS];
@@ -276,7 +289,7 @@ static void DC4(uint8_t* dst) {   // DC
   for (i = 0; i < 4; ++i) memset(dst + i * BPS, dc, 4);
 }
 
-static void RD4(uint8_t* dst) {   // Down-right
+static void RD4_C(uint8_t* dst) {   // Down-right
   const int I = dst[-1 + 0 * BPS];
   const int J = dst[-1 + 1 * BPS];
   const int K = dst[-1 + 2 * BPS];
@@ -295,7 +308,7 @@ static void RD4(uint8_t* dst) {   // Down-right
                                       DST(3, 0) = AVG3(D, C, B);
 }
 
-static void LD4(uint8_t* dst) {   // Down-Left
+static void LD4_C(uint8_t* dst) {   // Down-Left
   const int A = dst[0 - BPS];
   const int B = dst[1 - BPS];
   const int C = dst[2 - BPS];
@@ -312,8 +325,9 @@ static void LD4(uint8_t* dst) {   // Down-Left
                           DST(3, 2) = DST(2, 3) = AVG3(F, G, H);
                                       DST(3, 3) = AVG3(G, H, H);
 }
+#endif  // !WEBP_NEON_OMIT_C_CODE
 
-static void VR4(uint8_t* dst) {   // Vertical-Right
+static void VR4_C(uint8_t* dst) {   // Vertical-Right
   const int I = dst[-1 + 0 * BPS];
   const int J = dst[-1 + 1 * BPS];
   const int K = dst[-1 + 2 * BPS];
@@ -335,7 +349,7 @@ static void VR4(uint8_t* dst) {   // Vertical-Right
   DST(3, 1) =             AVG3(B, C, D);
 }
 
-static void VL4(uint8_t* dst) {   // Vertical-Left
+static void VL4_C(uint8_t* dst) {   // Vertical-Left
   const int A = dst[0 - BPS];
   const int B = dst[1 - BPS];
   const int C = dst[2 - BPS];
@@ -357,7 +371,7 @@ static void VL4(uint8_t* dst) {   // Vertical-Left
               DST(3, 3) = AVG3(F, G, H);
 }
 
-static void HU4(uint8_t* dst) {   // Horizontal-Up
+static void HU4_C(uint8_t* dst) {   // Horizontal-Up
   const int I = dst[-1 + 0 * BPS];
   const int J = dst[-1 + 1 * BPS];
   const int K = dst[-1 + 2 * BPS];
@@ -372,7 +386,7 @@ static void HU4(uint8_t* dst) {   // Horizontal-Up
     DST(0, 3) = DST(1, 3) = DST(2, 3) = DST(3, 3) = L;
 }
 
-static void HD4(uint8_t* dst) {  // Horizontal-Down
+static void HD4_C(uint8_t* dst) {  // Horizontal-Down
   const int I = dst[-1 + 0 * BPS];
   const int J = dst[-1 + 1 * BPS];
   const int K = dst[-1 + 2 * BPS];
@@ -404,14 +418,15 @@ VP8PredFunc VP8PredLuma4[NUM_BMODES];
 //------------------------------------------------------------------------------
 // Chroma
 
-static void VE8uv(uint8_t* dst) {    // vertical
+#if !WEBP_NEON_OMIT_C_CODE
+static void VE8uv_C(uint8_t* dst) {    // vertical
   int j;
   for (j = 0; j < 8; ++j) {
     memcpy(dst + j * BPS, dst - BPS, 8);
   }
 }
 
-static void HE8uv(uint8_t* dst) {    // horizontal
+static void HE8uv_C(uint8_t* dst) {    // horizontal
   int j;
   for (j = 0; j < 8; ++j) {
     memset(dst, dst[-1], 8);
@@ -427,7 +442,7 @@ static WEBP_INLINE void Put8x8uv(uint8_t value, uint8_t* dst) {
   }
 }
 
-static void DC8uv(uint8_t* dst) {     // DC
+static void DC8uv_C(uint8_t* dst) {     // DC
   int dc0 = 8;
   int i;
   for (i = 0; i < 8; ++i) {
@@ -436,7 +451,7 @@ static void DC8uv(uint8_t* dst) {     // DC
   Put8x8uv(dc0 >> 4, dst);
 }
 
-static void DC8uvNoLeft(uint8_t* dst) {   // DC with no left samples
+static void DC8uvNoLeft_C(uint8_t* dst) {   // DC with no left samples
   int dc0 = 4;
   int i;
   for (i = 0; i < 8; ++i) {
@@ -445,7 +460,7 @@ static void DC8uvNoLeft(uint8_t* dst) {   // DC with no left samples
   Put8x8uv(dc0 >> 3, dst);
 }
 
-static void DC8uvNoTop(uint8_t* dst) {  // DC with no top samples
+static void DC8uvNoTop_C(uint8_t* dst) {  // DC with no top samples
   int dc0 = 4;
   int i;
   for (i = 0; i < 8; ++i) {
@@ -454,17 +469,19 @@ static void DC8uvNoTop(uint8_t* dst) {  // DC with no top samples
   Put8x8uv(dc0 >> 3, dst);
 }
 
-static void DC8uvNoTopLeft(uint8_t* dst) {    // DC with nothing
+static void DC8uvNoTopLeft_C(uint8_t* dst) {    // DC with nothing
   Put8x8uv(0x80, dst);
 }
+#endif  // !WEBP_NEON_OMIT_C_CODE
 
 VP8PredFunc VP8PredChroma8[NUM_B_DC_MODES];
 
 //------------------------------------------------------------------------------
 // Edge filtering functions
 
+#if !WEBP_NEON_OMIT_C_CODE || WEBP_NEON_WORK_AROUND_GCC
 // 4 pixels in, 2 pixels out
-static WEBP_INLINE void do_filter2(uint8_t* p, int step) {
+static WEBP_INLINE void DoFilter2_C(uint8_t* p, int step) {
   const int p1 = p[-2*step], p0 = p[-step], q0 = p[0], q1 = p[step];
   const int a = 3 * (q0 - p0) + VP8ksclip1[p1 - q1];  // in [-893,892]
   const int a1 = VP8ksclip2[(a + 4) >> 3];            // in [-16,15]
@@ -474,7 +491,7 @@ static WEBP_INLINE void do_filter2(uint8_t* p, int step) {
 }
 
 // 4 pixels in, 4 pixels out
-static WEBP_INLINE void do_filter4(uint8_t* p, int step) {
+static WEBP_INLINE void DoFilter4_C(uint8_t* p, int step) {
   const int p1 = p[-2*step], p0 = p[-step], q0 = p[0], q1 = p[step];
   const int a = 3 * (q0 - p0);
   const int a1 = VP8ksclip2[(a + 4) >> 3];
@@ -487,7 +504,7 @@ static WEBP_INLINE void do_filter4(uint8_t* p, int step) {
 }
 
 // 6 pixels in, 6 pixels out
-static WEBP_INLINE void do_filter6(uint8_t* p, int step) {
+static WEBP_INLINE void DoFilter6_C(uint8_t* p, int step) {
   const int p2 = p[-3*step], p1 = p[-2*step], p0 = p[-step];
   const int q0 = p[0], q1 = p[step], q2 = p[2*step];
   const int a = VP8ksclip1[3 * (q0 - p0) + VP8ksclip1[p1 - q1]];
@@ -503,18 +520,22 @@ static WEBP_INLINE void do_filter6(uint8_t* p, int step) {
   p[ 2*step] = VP8kclip1[q2 - a3];
 }
 
-static WEBP_INLINE int hev(const uint8_t* p, int step, int thresh) {
+static WEBP_INLINE int Hev(const uint8_t* p, int step, int thresh) {
   const int p1 = p[-2*step], p0 = p[-step], q0 = p[0], q1 = p[step];
   return (VP8kabs0[p1 - p0] > thresh) || (VP8kabs0[q1 - q0] > thresh);
 }
+#endif  // !WEBP_NEON_OMIT_C_CODE || WEBP_NEON_WORK_AROUND_GCC
 
-static WEBP_INLINE int needs_filter(const uint8_t* p, int step, int t) {
+#if !WEBP_NEON_OMIT_C_CODE
+static WEBP_INLINE int NeedsFilter_C(const uint8_t* p, int step, int t) {
   const int p1 = p[-2 * step], p0 = p[-step], q0 = p[0], q1 = p[step];
   return ((4 * VP8kabs0[p0 - q0] + VP8kabs0[p1 - q1]) <= t);
 }
+#endif  // !WEBP_NEON_OMIT_C_CODE
 
-static WEBP_INLINE int needs_filter2(const uint8_t* p,
-                                     int step, int t, int it) {
+#if !WEBP_NEON_OMIT_C_CODE || WEBP_NEON_WORK_AROUND_GCC
+static WEBP_INLINE int NeedsFilter2_C(const uint8_t* p,
+                                      int step, int t, int it) {
   const int p3 = p[-4 * step], p2 = p[-3 * step], p1 = p[-2 * step];
   const int p0 = p[-step], q0 = p[0];
   const int q1 = p[step], q2 = p[2 * step], q3 = p[3 * step];
@@ -523,140 +544,159 @@ static WEBP_INLINE int needs_filter2(const uint8_t* p,
          VP8kabs0[p1 - p0] <= it && VP8kabs0[q3 - q2] <= it &&
          VP8kabs0[q2 - q1] <= it && VP8kabs0[q1 - q0] <= it;
 }
+#endif  // !WEBP_NEON_OMIT_C_CODE || WEBP_NEON_WORK_AROUND_GCC
 
 //------------------------------------------------------------------------------
 // Simple In-loop filtering (Paragraph 15.2)
 
-static void SimpleVFilter16(uint8_t* p, int stride, int thresh) {
+#if !WEBP_NEON_OMIT_C_CODE
+static void SimpleVFilter16_C(uint8_t* p, int stride, int thresh) {
   int i;
   const int thresh2 = 2 * thresh + 1;
   for (i = 0; i < 16; ++i) {
-    if (needs_filter(p + i, stride, thresh2)) {
-      do_filter2(p + i, stride);
+    if (NeedsFilter_C(p + i, stride, thresh2)) {
+      DoFilter2_C(p + i, stride);
     }
   }
 }
 
-static void SimpleHFilter16(uint8_t* p, int stride, int thresh) {
+static void SimpleHFilter16_C(uint8_t* p, int stride, int thresh) {
   int i;
   const int thresh2 = 2 * thresh + 1;
   for (i = 0; i < 16; ++i) {
-    if (needs_filter(p + i * stride, 1, thresh2)) {
-      do_filter2(p + i * stride, 1);
+    if (NeedsFilter_C(p + i * stride, 1, thresh2)) {
+      DoFilter2_C(p + i * stride, 1);
     }
   }
 }
 
-static void SimpleVFilter16i(uint8_t* p, int stride, int thresh) {
+static void SimpleVFilter16i_C(uint8_t* p, int stride, int thresh) {
   int k;
   for (k = 3; k > 0; --k) {
     p += 4 * stride;
-    SimpleVFilter16(p, stride, thresh);
+    SimpleVFilter16_C(p, stride, thresh);
   }
 }
 
-static void SimpleHFilter16i(uint8_t* p, int stride, int thresh) {
+static void SimpleHFilter16i_C(uint8_t* p, int stride, int thresh) {
   int k;
   for (k = 3; k > 0; --k) {
     p += 4;
-    SimpleHFilter16(p, stride, thresh);
+    SimpleHFilter16_C(p, stride, thresh);
   }
 }
+#endif  // !WEBP_NEON_OMIT_C_CODE
 
 //------------------------------------------------------------------------------
 // Complex In-loop filtering (Paragraph 15.3)
 
-static WEBP_INLINE void FilterLoop26(uint8_t* p,
-                                     int hstride, int vstride, int size,
-                                     int thresh, int ithresh, int hev_thresh) {
+#if !WEBP_NEON_OMIT_C_CODE || WEBP_NEON_WORK_AROUND_GCC
+static WEBP_INLINE void FilterLoop26_C(uint8_t* p,
+                                       int hstride, int vstride, int size,
+                                       int thresh, int ithresh,
+                                       int hev_thresh) {
   const int thresh2 = 2 * thresh + 1;
   while (size-- > 0) {
-    if (needs_filter2(p, hstride, thresh2, ithresh)) {
-      if (hev(p, hstride, hev_thresh)) {
-        do_filter2(p, hstride);
+    if (NeedsFilter2_C(p, hstride, thresh2, ithresh)) {
+      if (Hev(p, hstride, hev_thresh)) {
+        DoFilter2_C(p, hstride);
       } else {
-        do_filter6(p, hstride);
+        DoFilter6_C(p, hstride);
       }
     }
     p += vstride;
   }
 }
 
-static WEBP_INLINE void FilterLoop24(uint8_t* p,
-                                     int hstride, int vstride, int size,
-                                     int thresh, int ithresh, int hev_thresh) {
+static WEBP_INLINE void FilterLoop24_C(uint8_t* p,
+                                       int hstride, int vstride, int size,
+                                       int thresh, int ithresh,
+                                       int hev_thresh) {
   const int thresh2 = 2 * thresh + 1;
   while (size-- > 0) {
-    if (needs_filter2(p, hstride, thresh2, ithresh)) {
-      if (hev(p, hstride, hev_thresh)) {
-        do_filter2(p, hstride);
+    if (NeedsFilter2_C(p, hstride, thresh2, ithresh)) {
+      if (Hev(p, hstride, hev_thresh)) {
+        DoFilter2_C(p, hstride);
       } else {
-        do_filter4(p, hstride);
+        DoFilter4_C(p, hstride);
       }
     }
     p += vstride;
   }
 }
+#endif  // !WEBP_NEON_OMIT_C_CODE || WEBP_NEON_WORK_AROUND_GCC
 
+#if !WEBP_NEON_OMIT_C_CODE
 // on macroblock edges
-static void VFilter16(uint8_t* p, int stride,
-                      int thresh, int ithresh, int hev_thresh) {
-  FilterLoop26(p, stride, 1, 16, thresh, ithresh, hev_thresh);
+static void VFilter16_C(uint8_t* p, int stride,
+                        int thresh, int ithresh, int hev_thresh) {
+  FilterLoop26_C(p, stride, 1, 16, thresh, ithresh, hev_thresh);
 }
 
-static void HFilter16(uint8_t* p, int stride,
-                      int thresh, int ithresh, int hev_thresh) {
-  FilterLoop26(p, 1, stride, 16, thresh, ithresh, hev_thresh);
+static void HFilter16_C(uint8_t* p, int stride,
+                        int thresh, int ithresh, int hev_thresh) {
+  FilterLoop26_C(p, 1, stride, 16, thresh, ithresh, hev_thresh);
 }
 
 // on three inner edges
-static void VFilter16i(uint8_t* p, int stride,
-                       int thresh, int ithresh, int hev_thresh) {
+static void VFilter16i_C(uint8_t* p, int stride,
+                         int thresh, int ithresh, int hev_thresh) {
   int k;
   for (k = 3; k > 0; --k) {
     p += 4 * stride;
-    FilterLoop24(p, stride, 1, 16, thresh, ithresh, hev_thresh);
+    FilterLoop24_C(p, stride, 1, 16, thresh, ithresh, hev_thresh);
   }
 }
+#endif  // !WEBP_NEON_OMIT_C_CODE
 
-static void HFilter16i(uint8_t* p, int stride,
-                       int thresh, int ithresh, int hev_thresh) {
+#if !WEBP_NEON_OMIT_C_CODE || WEBP_NEON_WORK_AROUND_GCC
+static void HFilter16i_C(uint8_t* p, int stride,
+                         int thresh, int ithresh, int hev_thresh) {
   int k;
   for (k = 3; k > 0; --k) {
     p += 4;
-    FilterLoop24(p, 1, stride, 16, thresh, ithresh, hev_thresh);
+    FilterLoop24_C(p, 1, stride, 16, thresh, ithresh, hev_thresh);
   }
 }
+#endif  // !WEBP_NEON_OMIT_C_CODE || WEBP_NEON_WORK_AROUND_GCC
 
+#if !WEBP_NEON_OMIT_C_CODE
 // 8-pixels wide variant, for chroma filtering
-static void VFilter8(uint8_t* u, uint8_t* v, int stride,
-                     int thresh, int ithresh, int hev_thresh) {
-  FilterLoop26(u, stride, 1, 8, thresh, ithresh, hev_thresh);
-  FilterLoop26(v, stride, 1, 8, thresh, ithresh, hev_thresh);
+static void VFilter8_C(uint8_t* u, uint8_t* v, int stride,
+                       int thresh, int ithresh, int hev_thresh) {
+  FilterLoop26_C(u, stride, 1, 8, thresh, ithresh, hev_thresh);
+  FilterLoop26_C(v, stride, 1, 8, thresh, ithresh, hev_thresh);
 }
+#endif  // !WEBP_NEON_OMIT_C_CODE
 
-static void HFilter8(uint8_t* u, uint8_t* v, int stride,
-                     int thresh, int ithresh, int hev_thresh) {
-  FilterLoop26(u, 1, stride, 8, thresh, ithresh, hev_thresh);
-  FilterLoop26(v, 1, stride, 8, thresh, ithresh, hev_thresh);
+#if !WEBP_NEON_OMIT_C_CODE || WEBP_NEON_WORK_AROUND_GCC
+static void HFilter8_C(uint8_t* u, uint8_t* v, int stride,
+                       int thresh, int ithresh, int hev_thresh) {
+  FilterLoop26_C(u, 1, stride, 8, thresh, ithresh, hev_thresh);
+  FilterLoop26_C(v, 1, stride, 8, thresh, ithresh, hev_thresh);
 }
+#endif  // !WEBP_NEON_OMIT_C_CODE || WEBP_NEON_WORK_AROUND_GCC
 
-static void VFilter8i(uint8_t* u, uint8_t* v, int stride,
-                      int thresh, int ithresh, int hev_thresh) {
-  FilterLoop24(u + 4 * stride, stride, 1, 8, thresh, ithresh, hev_thresh);
-  FilterLoop24(v + 4 * stride, stride, 1, 8, thresh, ithresh, hev_thresh);
+#if !WEBP_NEON_OMIT_C_CODE
+static void VFilter8i_C(uint8_t* u, uint8_t* v, int stride,
+                        int thresh, int ithresh, int hev_thresh) {
+  FilterLoop24_C(u + 4 * stride, stride, 1, 8, thresh, ithresh, hev_thresh);
+  FilterLoop24_C(v + 4 * stride, stride, 1, 8, thresh, ithresh, hev_thresh);
 }
+#endif  // !WEBP_NEON_OMIT_C_CODE
 
-static void HFilter8i(uint8_t* u, uint8_t* v, int stride,
-                      int thresh, int ithresh, int hev_thresh) {
-  FilterLoop24(u + 4, 1, stride, 8, thresh, ithresh, hev_thresh);
-  FilterLoop24(v + 4, 1, stride, 8, thresh, ithresh, hev_thresh);
+#if !WEBP_NEON_OMIT_C_CODE || WEBP_NEON_WORK_AROUND_GCC
+static void HFilter8i_C(uint8_t* u, uint8_t* v, int stride,
+                        int thresh, int ithresh, int hev_thresh) {
+  FilterLoop24_C(u + 4, 1, stride, 8, thresh, ithresh, hev_thresh);
+  FilterLoop24_C(v + 4, 1, stride, 8, thresh, ithresh, hev_thresh);
 }
+#endif  // !WEBP_NEON_OMIT_C_CODE || WEBP_NEON_WORK_AROUND_GCC
 
 //------------------------------------------------------------------------------
 
-static void DitherCombine8x8(const uint8_t* dither, uint8_t* dst,
-                             int dst_stride) {
+static void DitherCombine8x8_C(const uint8_t* dither, uint8_t* dst,
+                               int dst_stride) {
   int i, j;
   for (j = 0; j < 8; ++j) {
     for (i = 0; i < 8; ++i) {
@@ -700,7 +740,6 @@ extern void VP8DspInitNEON(void);
 extern void VP8DspInitMIPS32(void);
 extern void VP8DspInitMIPSdspR2(void);
 extern void VP8DspInitMSA(void);
-extern void VP8DspInitWASM(void);
 
 static volatile VP8CPUInfo dec_last_cpuinfo_used =
     (VP8CPUInfo)&dec_last_cpuinfo_used;
@@ -710,54 +749,66 @@ WEBP_TSAN_IGNORE_FUNCTION void VP8DspInit(void) {
 
   VP8InitClipTables();
 
-  VP8TransformWHT = TransformWHT;
-  VP8Transform = TransformTwo;
-  VP8TransformUV = TransformUV;
-  VP8TransformDC = TransformDC;
-  VP8TransformDCUV = TransformDCUV;
-  VP8TransformAC3 = TransformAC3;
+#if !WEBP_NEON_OMIT_C_CODE
+  VP8TransformWHT = TransformWHT_C;
+  VP8Transform = TransformTwo_C;
+  VP8TransformDC = TransformDC_C;
+  VP8TransformAC3 = TransformAC3_C;
+#endif
+  VP8TransformUV = TransformUV_C;
+  VP8TransformDCUV = TransformDCUV_C;
 
-  VP8VFilter16 = VFilter16;
-  VP8HFilter16 = HFilter16;
-  VP8VFilter8 = VFilter8;
-  VP8HFilter8 = HFilter8;
-  VP8VFilter16i = VFilter16i;
-  VP8HFilter16i = HFilter16i;
-  VP8VFilter8i = VFilter8i;
-  VP8HFilter8i = HFilter8i;
-  VP8SimpleVFilter16 = SimpleVFilter16;
-  VP8SimpleHFilter16 = SimpleHFilter16;
-  VP8SimpleVFilter16i = SimpleVFilter16i;
-  VP8SimpleHFilter16i = SimpleHFilter16i;
+#if !WEBP_NEON_OMIT_C_CODE
+  VP8VFilter16 = VFilter16_C;
+  VP8VFilter16i = VFilter16i_C;
+  VP8HFilter16 = HFilter16_C;
+  VP8VFilter8 = VFilter8_C;
+  VP8VFilter8i = VFilter8i_C;
+  VP8SimpleVFilter16 = SimpleVFilter16_C;
+  VP8SimpleHFilter16 = SimpleHFilter16_C;
+  VP8SimpleVFilter16i = SimpleVFilter16i_C;
+  VP8SimpleHFilter16i = SimpleHFilter16i_C;
+#endif
 
-  VP8PredLuma4[0] = DC4;
-  VP8PredLuma4[1] = TM4;
-  VP8PredLuma4[2] = VE4;
-  VP8PredLuma4[3] = HE4;
-  VP8PredLuma4[4] = RD4;
-  VP8PredLuma4[5] = VR4;
-  VP8PredLuma4[6] = LD4;
-  VP8PredLuma4[7] = VL4;
-  VP8PredLuma4[8] = HD4;
-  VP8PredLuma4[9] = HU4;
+#if !WEBP_NEON_OMIT_C_CODE || WEBP_NEON_WORK_AROUND_GCC
+  VP8HFilter16i = HFilter16i_C;
+  VP8HFilter8 = HFilter8_C;
+  VP8HFilter8i = HFilter8i_C;
+#endif
 
-  VP8PredLuma16[0] = DC16;
-  VP8PredLuma16[1] = TM16;
-  VP8PredLuma16[2] = VE16;
-  VP8PredLuma16[3] = HE16;
-  VP8PredLuma16[4] = DC16NoTop;
-  VP8PredLuma16[5] = DC16NoLeft;
-  VP8PredLuma16[6] = DC16NoTopLeft;
+#if !WEBP_NEON_OMIT_C_CODE
+  VP8PredLuma4[0] = DC4_C;
+  VP8PredLuma4[1] = TM4_C;
+  VP8PredLuma4[2] = VE4_C;
+  VP8PredLuma4[4] = RD4_C;
+  VP8PredLuma4[6] = LD4_C;
+#endif
 
-  VP8PredChroma8[0] = DC8uv;
-  VP8PredChroma8[1] = TM8uv;
-  VP8PredChroma8[2] = VE8uv;
-  VP8PredChroma8[3] = HE8uv;
-  VP8PredChroma8[4] = DC8uvNoTop;
-  VP8PredChroma8[5] = DC8uvNoLeft;
-  VP8PredChroma8[6] = DC8uvNoTopLeft;
+  VP8PredLuma4[3] = HE4_C;
+  VP8PredLuma4[5] = VR4_C;
+  VP8PredLuma4[7] = VL4_C;
+  VP8PredLuma4[8] = HD4_C;
+  VP8PredLuma4[9] = HU4_C;
 
-  VP8DitherCombine8x8 = DitherCombine8x8;
+#if !WEBP_NEON_OMIT_C_CODE
+  VP8PredLuma16[0] = DC16_C;
+  VP8PredLuma16[1] = TM16_C;
+  VP8PredLuma16[2] = VE16_C;
+  VP8PredLuma16[3] = HE16_C;
+  VP8PredLuma16[4] = DC16NoTop_C;
+  VP8PredLuma16[5] = DC16NoLeft_C;
+  VP8PredLuma16[6] = DC16NoTopLeft_C;
+
+  VP8PredChroma8[0] = DC8uv_C;
+  VP8PredChroma8[1] = TM8uv_C;
+  VP8PredChroma8[2] = VE8uv_C;
+  VP8PredChroma8[3] = HE8uv_C;
+  VP8PredChroma8[4] = DC8uvNoTop_C;
+  VP8PredChroma8[5] = DC8uvNoLeft_C;
+  VP8PredChroma8[6] = DC8uvNoTopLeft_C;
+#endif
+
+  VP8DitherCombine8x8 = DitherCombine8x8_C;
 
   // If defined, use CPUInfo() to overwrite some pointers with faster versions.
   if (VP8GetCPUInfo != NULL) {
@@ -771,11 +822,6 @@ WEBP_TSAN_IGNORE_FUNCTION void VP8DspInit(void) {
 #endif
     }
 #endif
-#if defined(WEBP_USE_NEON)
-    if (VP8GetCPUInfo(kNEON)) {
-      VP8DspInitNEON();
-    }
-#endif
 #if defined(WEBP_USE_MIPS32)
     if (VP8GetCPUInfo(kMIPS32)) {
       VP8DspInitMIPS32();
@@ -790,12 +836,59 @@ WEBP_TSAN_IGNORE_FUNCTION void VP8DspInit(void) {
     if (VP8GetCPUInfo(kMSA)) {
       VP8DspInitMSA();
     }
-#endif
-#if defined(WEBP_USE_WASM)
-    if (VP8GetCPUInfo(kWASM)) {
-      VP8DspInitWASM();
-    }
 #endif
   }
+
+#if defined(WEBP_USE_NEON)
+  if (WEBP_NEON_OMIT_C_CODE ||
+      (VP8GetCPUInfo != NULL && VP8GetCPUInfo(kNEON))) {
+    VP8DspInitNEON();
+  }
+#endif
+
+  assert(VP8TransformWHT != NULL);
+  assert(VP8Transform != NULL);
+  assert(VP8TransformDC != NULL);
+  assert(VP8TransformAC3 != NULL);
+  assert(VP8TransformUV != NULL);
+  assert(VP8TransformDCUV != NULL);
+  assert(VP8VFilter16 != NULL);
+  assert(VP8HFilter16 != NULL);
+  assert(VP8VFilter8 != NULL);
+  assert(VP8HFilter8 != NULL);
+  assert(VP8VFilter16i != NULL);
+  assert(VP8HFilter16i != NULL);
+  assert(VP8VFilter8i != NULL);
+  assert(VP8HFilter8i != NULL);
+  assert(VP8SimpleVFilter16 != NULL);
+  assert(VP8SimpleHFilter16 != NULL);
+  assert(VP8SimpleVFilter16i != NULL);
+  assert(VP8SimpleHFilter16i != NULL);
+  assert(VP8PredLuma4[0] != NULL);
+  assert(VP8PredLuma4[1] != NULL);
+  assert(VP8PredLuma4[2] != NULL);
+  assert(VP8PredLuma4[3] != NULL);
+  assert(VP8PredLuma4[4] != NULL);
+  assert(VP8PredLuma4[5] != NULL);
+  assert(VP8PredLuma4[6] != NULL);
+  assert(VP8PredLuma4[7] != NULL);
+  assert(VP8PredLuma4[8] != NULL);
+  assert(VP8PredLuma4[9] != NULL);
+  assert(VP8PredLuma16[0] != NULL);
+  assert(VP8PredLuma16[1] != NULL);
+  assert(VP8PredLuma16[2] != NULL);
+  assert(VP8PredLuma16[3] != NULL);
+  assert(VP8PredLuma16[4] != NULL);
+  assert(VP8PredLuma16[5] != NULL);
+  assert(VP8PredLuma16[6] != NULL);
+  assert(VP8PredChroma8[0] != NULL);
+  assert(VP8PredChroma8[1] != NULL);
+  assert(VP8PredChroma8[2] != NULL);
+  assert(VP8PredChroma8[3] != NULL);
+  assert(VP8PredChroma8[4] != NULL);
+  assert(VP8PredChroma8[5] != NULL);
+  assert(VP8PredChroma8[6] != NULL);
+  assert(VP8DitherCombine8x8 != NULL);
+
   dec_last_cpuinfo_used = VP8GetCPUInfo;
 }

src/dsp/dec_clip_tables.c

@@ -11,11 +11,14 @@
 //
 // Author: Skal (pascal.massimino@gmail.com)
 
-#include "./dsp.h"
+#include "src/dsp/dsp.h"
 
-#define USE_STATIC_TABLES     // undefine to have run-time table initialization
+// define to 0 to have run-time table initialization
+#if !defined(USE_STATIC_TABLES)
+#define USE_STATIC_TABLES 1   // ALTERNATE_CODE
+#endif
 
-#ifdef USE_STATIC_TABLES
+#if (USE_STATIC_TABLES == 1)
 
 static const uint8_t abs0[255 + 255 + 1] = {
   0xff, 0xfe, 0xfd, 0xfc, 0xfb, 0xfa, 0xf9, 0xf8, 0xf7, 0xf6, 0xf5, 0xf4,
@@ -337,7 +340,7 @@ static uint8_t clip1[255 + 511 + 1];
 // and make sure it's set to true _last_ (so as to be thread-safe)
 static volatile int tables_ok = 0;
 
-#endif
+#endif    // USE_STATIC_TABLES
 
 const int8_t* const VP8ksclip1 = (const int8_t*)&sclip1[1020];
 const int8_t* const VP8ksclip2 = (const int8_t*)&sclip2[112];
@@ -345,7 +348,7 @@ const uint8_t* const VP8kclip1 = &clip1[255];
 const uint8_t* const VP8kabs0 = &abs0[255];
 
 WEBP_TSAN_IGNORE_FUNCTION void VP8InitClipTables(void) {
-#if !defined(USE_STATIC_TABLES)
+#if (USE_STATIC_TABLES == 0)
   int i;
   if (!tables_ok) {
     for (i = -255; i <= 255; ++i) {

src/dsp/dec_mips32.c

@@ -12,11 +12,11 @@
 // Author(s):  Djordje Pesut    (djordje.pesut@imgtec.com)
 //             Jovan Zelincevic (jovan.zelincevic@imgtec.com)
 
-#include "./dsp.h"
+#include "src/dsp/dsp.h"
 
 #if defined(WEBP_USE_MIPS32)
 
-#include "./mips_macro.h"
+#include "src/dsp/mips_macro.h"
 
 static const int kC1 = 20091 + (1 << 16);
 static const int kC2 = 35468;

src/dsp/dec_mips_dsp_r2.c

@@ -12,11 +12,11 @@
 // Author(s):  Djordje Pesut    (djordje.pesut@imgtec.com)
 //             Jovan Zelincevic (jovan.zelincevic@imgtec.com)
 
-#include "./dsp.h"
+#include "src/dsp/dsp.h"
 
 #if defined(WEBP_USE_MIPS_DSP_R2)
 
-#include "./mips_macro.h"
+#include "src/dsp/mips_macro.h"
 
 static const int kC1 = 20091 + (1 << 16);
 static const int kC2 = 35468;

src/dsp/dec_msa.c

@@ -12,11 +12,11 @@
 // Author(s):  Prashant Patil   (prashant.patil@imgtec.com)
 
 
-#include "./dsp.h"
+#include "src/dsp/dsp.h"
 
 #if defined(WEBP_USE_MSA)
 
-#include "./msa_macro.h"
+#include "src/dsp/msa_macro.h"
 
 //------------------------------------------------------------------------------
 // Transforms

src/dsp/dec_sse2.c

@@ -12,23 +12,25 @@
 // Author: somnath@google.com (Somnath Banerjee)
 //         cduvivier@google.com (Christian Duvivier)
 
-#include "./dsp.h"
+#include "src/dsp/dsp.h"
 
 #if defined(WEBP_USE_SSE2)
 
 // The 3-coeff sparse transform in SSE2 is not really faster than the plain-C
 // one it seems => disable it by default. Uncomment the following to enable:
-// #define USE_TRANSFORM_AC3
+#if !defined(USE_TRANSFORM_AC3)
+#define USE_TRANSFORM_AC3 0   // ALTERNATE_CODE
+#endif
 
 #include <emmintrin.h>
-#include "./common_sse2.h"
-#include "../dec/vp8i_dec.h"
-#include "../utils/utils.h"
+#include "src/dsp/common_sse2.h"
+#include "src/dec/vp8i_dec.h"
+#include "src/utils/utils.h"
 
 //------------------------------------------------------------------------------
 // Transforms (Paragraph 14.4)
 
-static void Transform(const int16_t* in, uint8_t* dst, int do_two) {
+static void Transform_SSE2(const int16_t* in, uint8_t* dst, int do_two) {
   // This implementation makes use of 16-bit fixed point versions of two
   // multiply constants:
   //    K1 = sqrt(2) * cos (pi/8) ~= 85627 / 2^16
@@ -193,7 +195,7 @@ static void Transform(const int16_t* in, uint8_t* dst, int do_two) {
   }
 }
 
-#if defined(USE_TRANSFORM_AC3)
+#if (USE_TRANSFORM_AC3 == 1)
 #define MUL(a, b) (((a) * (b)) >> 16)
 static void TransformAC3(const int16_t* in, uint8_t* dst) {
   static const int kC1 = 20091 + (1 << 16);
@@ -248,7 +250,7 @@ static void TransformAC3(const int16_t* in, uint8_t* dst) {
     _mm_subs_epu8((p), (q)))
 
 // Shift each byte of "x" by 3 bits while preserving by the sign bit.
-static WEBP_INLINE void SignedShift8b(__m128i* const x) {
+static WEBP_INLINE void SignedShift8b_SSE2(__m128i* const x) {
   const __m128i zero = _mm_setzero_si128();
   const __m128i lo_0 = _mm_unpacklo_epi8(zero, *x);
   const __m128i hi_0 = _mm_unpackhi_epi8(zero, *x);
@@ -258,8 +260,8 @@ static WEBP_INLINE void SignedShift8b(__m128i* const x) {
 }
 
 #define FLIP_SIGN_BIT2(a, b) {                                                 \
-  a = _mm_xor_si128(a, sign_bit);                                              \
-  b = _mm_xor_si128(b, sign_bit);                                              \
+  (a) = _mm_xor_si128(a, sign_bit);                                            \
+  (b) = _mm_xor_si128(b, sign_bit);                                            \
 }
 
 #define FLIP_SIGN_BIT4(a, b, c, d) {                                           \
@@ -268,11 +270,11 @@ static WEBP_INLINE void SignedShift8b(__m128i* const x) {
 }
 
 // input/output is uint8_t
-static WEBP_INLINE void GetNotHEV(const __m128i* const p1,
-                                  const __m128i* const p0,
-                                  const __m128i* const q0,
-                                  const __m128i* const q1,
-                                  int hev_thresh, __m128i* const not_hev) {
+static WEBP_INLINE void GetNotHEV_SSE2(const __m128i* const p1,
+                                       const __m128i* const p0,
+                                       const __m128i* const q0,
+                                       const __m128i* const q1,
+                                       int hev_thresh, __m128i* const not_hev) {
   const __m128i zero = _mm_setzero_si128();
   const __m128i t_1 = MM_ABS(*p1, *p0);
   const __m128i t_2 = MM_ABS(*q1, *q0);
@@ -285,11 +287,11 @@ static WEBP_INLINE void GetNotHEV(const __m128i* const p1,
 }
 
 // input pixels are int8_t
-static WEBP_INLINE void GetBaseDelta(const __m128i* const p1,
-                                     const __m128i* const p0,
-                                     const __m128i* const q0,
-                                     const __m128i* const q1,
-                                     __m128i* const delta) {
+static WEBP_INLINE void GetBaseDelta_SSE2(const __m128i* const p1,
+                                          const __m128i* const p0,
+                                          const __m128i* const q0,
+                                          const __m128i* const q1,
+                                          __m128i* const delta) {
   // beware of addition order, for saturation!
   const __m128i p1_q1 = _mm_subs_epi8(*p1, *q1);   // p1 - q1
   const __m128i q0_p0 = _mm_subs_epi8(*q0, *p0);   // q0 - p0
@@ -300,15 +302,16 @@ static WEBP_INLINE void GetBaseDelta(const __m128i* const p1,
 }
 
 // input and output are int8_t
-static WEBP_INLINE void DoSimpleFilter(__m128i* const p0, __m128i* const q0,
-                                       const __m128i* const fl) {
+static WEBP_INLINE void DoSimpleFilter_SSE2(__m128i* const p0,
+                                            __m128i* const q0,
+                                            const __m128i* const fl) {
   const __m128i k3 = _mm_set1_epi8(3);
   const __m128i k4 = _mm_set1_epi8(4);
   __m128i v3 = _mm_adds_epi8(*fl, k3);
   __m128i v4 = _mm_adds_epi8(*fl, k4);
 
-  SignedShift8b(&v4);                  // v4 >> 3
-  SignedShift8b(&v3);                  // v3 >> 3
+  SignedShift8b_SSE2(&v4);             // v4 >> 3
+  SignedShift8b_SSE2(&v3);             // v3 >> 3
   *q0 = _mm_subs_epi8(*q0, v4);        // q0 -= v4
   *p0 = _mm_adds_epi8(*p0, v3);        // p0 += v3
 }
@@ -317,9 +320,9 @@ static WEBP_INLINE void DoSimpleFilter(__m128i* const p0, __m128i* const q0,
 // Update operations:
 // q = q - delta and p = p + delta; where delta = [(a_hi >> 7), (a_lo >> 7)]
 // Pixels 'pi' and 'qi' are int8_t on input, uint8_t on output (sign flip).
-static WEBP_INLINE void Update2Pixels(__m128i* const pi, __m128i* const qi,
-                                      const __m128i* const a0_lo,
-                                      const __m128i* const a0_hi) {
+static WEBP_INLINE void Update2Pixels_SSE2(__m128i* const pi, __m128i* const qi,
+                                           const __m128i* const a0_lo,
+                                           const __m128i* const a0_hi) {
   const __m128i a1_lo = _mm_srai_epi16(*a0_lo, 7);
   const __m128i a1_hi = _mm_srai_epi16(*a0_hi, 7);
   const __m128i delta = _mm_packs_epi16(a1_lo, a1_hi);
@@ -330,11 +333,11 @@ static WEBP_INLINE void Update2Pixels(__m128i* const pi, __m128i* const qi,
 }
 
 // input pixels are uint8_t
-static WEBP_INLINE void NeedsFilter(const __m128i* const p1,
-                                    const __m128i* const p0,
-                                    const __m128i* const q0,
-                                    const __m128i* const q1,
-                                    int thresh, __m128i* const mask) {
+static WEBP_INLINE void NeedsFilter_SSE2(const __m128i* const p1,
+                                         const __m128i* const p0,
+                                         const __m128i* const q0,
+                                         const __m128i* const q1,
+                                         int thresh, __m128i* const mask) {
   const __m128i m_thresh = _mm_set1_epi8(thresh);
   const __m128i t1 = MM_ABS(*p1, *q1);        // abs(p1 - q1)
   const __m128i kFE = _mm_set1_epi8(0xFE);
@@ -353,28 +356,29 @@ static WEBP_INLINE void NeedsFilter(const __m128i* const p1,
 // Edge filtering functions
 
 // Applies filter on 2 pixels (p0 and q0)
-static WEBP_INLINE void DoFilter2(__m128i* const p1, __m128i* const p0,
-                                  __m128i* const q0, __m128i* const q1,
-                                  int thresh) {
+static WEBP_INLINE void DoFilter2_SSE2(__m128i* const p1, __m128i* const p0,
+                                       __m128i* const q0, __m128i* const q1,
+                                       int thresh) {
   __m128i a, mask;
   const __m128i sign_bit = _mm_set1_epi8(0x80);
-  // convert p1/q1 to int8_t (for GetBaseDelta)
+  // convert p1/q1 to int8_t (for GetBaseDelta_SSE2)
   const __m128i p1s = _mm_xor_si128(*p1, sign_bit);
   const __m128i q1s = _mm_xor_si128(*q1, sign_bit);
 
-  NeedsFilter(p1, p0, q0, q1, thresh, &mask);
+  NeedsFilter_SSE2(p1, p0, q0, q1, thresh, &mask);
 
   FLIP_SIGN_BIT2(*p0, *q0);
-  GetBaseDelta(&p1s, p0, q0, &q1s, &a);
+  GetBaseDelta_SSE2(&p1s, p0, q0, &q1s, &a);
   a = _mm_and_si128(a, mask);     // mask filter values we don't care about
-  DoSimpleFilter(p0, q0, &a);
+  DoSimpleFilter_SSE2(p0, q0, &a);
   FLIP_SIGN_BIT2(*p0, *q0);
 }
 
 // Applies filter on 4 pixels (p1, p0, q0 and q1)
-static WEBP_INLINE void DoFilter4(__m128i* const p1, __m128i* const p0,
-                                  __m128i* const q0, __m128i* const q1,
-                                  const __m128i* const mask, int hev_thresh) {
+static WEBP_INLINE void DoFilter4_SSE2(__m128i* const p1, __m128i* const p0,
+                                       __m128i* const q0, __m128i* const q1,
+                                       const __m128i* const mask,
+                                       int hev_thresh) {
   const __m128i zero = _mm_setzero_si128();
   const __m128i sign_bit = _mm_set1_epi8(0x80);
   const __m128i k64 = _mm_set1_epi8(64);
@@ -384,7 +388,7 @@ static WEBP_INLINE void DoFilter4(__m128i* const p1, __m128i* const p0,
   __m128i t1, t2, t3;
 
   // compute hev mask
-  GetNotHEV(p1, p0, q0, q1, hev_thresh, &not_hev);
+  GetNotHEV_SSE2(p1, p0, q0, q1, hev_thresh, &not_hev);
 
   // convert to signed values
   FLIP_SIGN_BIT4(*p1, *p0, *q0, *q1);
@@ -399,8 +403,8 @@ static WEBP_INLINE void DoFilter4(__m128i* const p1, __m128i* const p0,
 
   t2 = _mm_adds_epi8(t1, k3);        // 3 * (q0 - p0) + hev(p1 - q1) + 3
   t3 = _mm_adds_epi8(t1, k4);        // 3 * (q0 - p0) + hev(p1 - q1) + 4
-  SignedShift8b(&t2);                // (3 * (q0 - p0) + hev(p1 - q1) + 3) >> 3
-  SignedShift8b(&t3);                // (3 * (q0 - p0) + hev(p1 - q1) + 4) >> 3
+  SignedShift8b_SSE2(&t2);           // (3 * (q0 - p0) + hev(p1 - q1) + 3) >> 3
+  SignedShift8b_SSE2(&t3);           // (3 * (q0 - p0) + hev(p1 - q1) + 4) >> 3
   *p0 = _mm_adds_epi8(*p0, t2);      // p0 += t2
   *q0 = _mm_subs_epi8(*q0, t3);      // q0 -= t3
   FLIP_SIGN_BIT2(*p0, *q0);
@@ -417,25 +421,26 @@ static WEBP_INLINE void DoFilter4(__m128i* const p1, __m128i* const p0,
 }
 
 // Applies filter on 6 pixels (p2, p1, p0, q0, q1 and q2)
-static WEBP_INLINE void DoFilter6(__m128i* const p2, __m128i* const p1,
-                                  __m128i* const p0, __m128i* const q0,
-                                  __m128i* const q1, __m128i* const q2,
-                                  const __m128i* const mask, int hev_thresh) {
+static WEBP_INLINE void DoFilter6_SSE2(__m128i* const p2, __m128i* const p1,
+                                       __m128i* const p0, __m128i* const q0,
+                                       __m128i* const q1, __m128i* const q2,
+                                       const __m128i* const mask,
+                                       int hev_thresh) {
   const __m128i zero = _mm_setzero_si128();
   const __m128i sign_bit = _mm_set1_epi8(0x80);
   __m128i a, not_hev;
 
   // compute hev mask
-  GetNotHEV(p1, p0, q0, q1, hev_thresh, &not_hev);
+  GetNotHEV_SSE2(p1, p0, q0, q1, hev_thresh, &not_hev);
 
   FLIP_SIGN_BIT4(*p1, *p0, *q0, *q1);
   FLIP_SIGN_BIT2(*p2, *q2);
-  GetBaseDelta(p1, p0, q0, q1, &a);
+  GetBaseDelta_SSE2(p1, p0, q0, q1, &a);
 
   { // do simple filter on pixels with hev
     const __m128i m = _mm_andnot_si128(not_hev, *mask);
     const __m128i f = _mm_and_si128(a, m);
-    DoSimpleFilter(p0, q0, &f);
+    DoSimpleFilter_SSE2(p0, q0, &f);
   }
 
   { // do strong filter on pixels with not hev
@@ -460,15 +465,15 @@ static WEBP_INLINE void DoFilter6(__m128i* const p2, __m128i* const p1,
     const __m128i a0_lo = _mm_add_epi16(a1_lo, f9_lo);  // Filter * 27 + 63
     const __m128i a0_hi = _mm_add_epi16(a1_hi, f9_hi);  // Filter * 27 + 63
 
-    Update2Pixels(p2, q2, &a2_lo, &a2_hi);
-    Update2Pixels(p1, q1, &a1_lo, &a1_hi);
-    Update2Pixels(p0, q0, &a0_lo, &a0_hi);
+    Update2Pixels_SSE2(p2, q2, &a2_lo, &a2_hi);
+    Update2Pixels_SSE2(p1, q1, &a1_lo, &a1_hi);
+    Update2Pixels_SSE2(p0, q0, &a0_lo, &a0_hi);
   }
 }
 
 // reads 8 rows across a vertical edge.
-static WEBP_INLINE void Load8x4(const uint8_t* const b, int stride,
-                                __m128i* const p, __m128i* const q) {
+static WEBP_INLINE void Load8x4_SSE2(const uint8_t* const b, int stride,
+                                     __m128i* const p, __m128i* const q) {
   // A0 = 63 62 61 60 23 22 21 20 43 42 41 40 03 02 01 00
   // A1 = 73 72 71 70 33 32 31 30 53 52 51 50 13 12 11 10
   const __m128i A0 = _mm_set_epi32(
@@ -494,11 +499,11 @@ static WEBP_INLINE void Load8x4(const uint8_t* const b, int stride,
   *q = _mm_unpackhi_epi32(C0, C1);
 }
 
-static WEBP_INLINE void Load16x4(const uint8_t* const r0,
-                                 const uint8_t* const r8,
-                                 int stride,
-                                 __m128i* const p1, __m128i* const p0,
-                                 __m128i* const q0, __m128i* const q1) {
+static WEBP_INLINE void Load16x4_SSE2(const uint8_t* const r0,
+                                      const uint8_t* const r8,
+                                      int stride,
+                                      __m128i* const p1, __m128i* const p0,
+                                      __m128i* const q0, __m128i* const q1) {
   // Assume the pixels around the edge (|) are numbered as follows
   //                00 01 | 02 03
   //                10 11 | 12 13
@@ -514,8 +519,8 @@ static WEBP_INLINE void Load16x4(const uint8_t* const r0,
   // q0 = 73 63 53 43 33 23 13 03 72 62 52 42 32 22 12 02
   // p0 = f1 e1 d1 c1 b1 a1 91 81 f0 e0 d0 c0 b0 a0 90 80
   // q1 = f3 e3 d3 c3 b3 a3 93 83 f2 e2 d2 c2 b2 a2 92 82
-  Load8x4(r0, stride, p1, q0);
-  Load8x4(r8, stride, p0, q1);
+  Load8x4_SSE2(r0, stride, p1, q0);
+  Load8x4_SSE2(r8, stride, p0, q1);
 
   {
     // p1 = f0 e0 d0 c0 b0 a0 90 80 70 60 50 40 30 20 10 00
@@ -531,7 +536,8 @@ static WEBP_INLINE void Load16x4(const uint8_t* const r0,
   }
 }
 
-static WEBP_INLINE void Store4x4(__m128i* const x, uint8_t* dst, int stride) {
+static WEBP_INLINE void Store4x4_SSE2(__m128i* const x,
+                                      uint8_t* dst, int stride) {
   int i;
   for (i = 0; i < 4; ++i, dst += stride) {
     WebPUint32ToMem(dst, _mm_cvtsi128_si32(*x));
@@ -540,12 +546,12 @@ static WEBP_INLINE void Store4x4(__m128i* const x, uint8_t* dst, int stride) {
 }
 
 // Transpose back and store
-static WEBP_INLINE void Store16x4(const __m128i* const p1,
-                                  const __m128i* const p0,
-                                  const __m128i* const q0,
-                                  const __m128i* const q1,
-                                  uint8_t* r0, uint8_t* r8,
-                                  int stride) {
+static WEBP_INLINE void Store16x4_SSE2(const __m128i* const p1,
+                                       const __m128i* const p0,
+                                       const __m128i* const q0,
+                                       const __m128i* const q1,
+                                       uint8_t* r0, uint8_t* r8,
+                                       int stride) {
   __m128i t1, p1_s, p0_s, q0_s, q1_s;
 
   // p0 = 71 70 61 60 51 50 41 40 31 30 21 20 11 10 01 00
@@ -572,55 +578,55 @@ static WEBP_INLINE void Store16x4(const __m128i* const p1,
   p1_s = _mm_unpacklo_epi16(t1, q1_s);
   q1_s = _mm_unpackhi_epi16(t1, q1_s);
 
-  Store4x4(&p0_s, r0, stride);
+  Store4x4_SSE2(&p0_s, r0, stride);
   r0 += 4 * stride;
-  Store4x4(&q0_s, r0, stride);
+  Store4x4_SSE2(&q0_s, r0, stride);
 
-  Store4x4(&p1_s, r8, stride);
+  Store4x4_SSE2(&p1_s, r8, stride);
   r8 += 4 * stride;
-  Store4x4(&q1_s, r8, stride);
+  Store4x4_SSE2(&q1_s, r8, stride);
 }
 
 //------------------------------------------------------------------------------
 // Simple In-loop filtering (Paragraph 15.2)
 
-static void SimpleVFilter16(uint8_t* p, int stride, int thresh) {
+static void SimpleVFilter16_SSE2(uint8_t* p, int stride, int thresh) {
   // Load
   __m128i p1 = _mm_loadu_si128((__m128i*)&p[-2 * stride]);
   __m128i p0 = _mm_loadu_si128((__m128i*)&p[-stride]);
   __m128i q0 = _mm_loadu_si128((__m128i*)&p[0]);
   __m128i q1 = _mm_loadu_si128((__m128i*)&p[stride]);
 
-  DoFilter2(&p1, &p0, &q0, &q1, thresh);
+  DoFilter2_SSE2(&p1, &p0, &q0, &q1, thresh);
 
   // Store
   _mm_storeu_si128((__m128i*)&p[-stride], p0);
   _mm_storeu_si128((__m128i*)&p[0], q0);
 }
 
-static void SimpleHFilter16(uint8_t* p, int stride, int thresh) {
+static void SimpleHFilter16_SSE2(uint8_t* p, int stride, int thresh) {
   __m128i p1, p0, q0, q1;
 
   p -= 2;  // beginning of p1
 
-  Load16x4(p, p + 8 * stride, stride, &p1, &p0, &q0, &q1);
-  DoFilter2(&p1, &p0, &q0, &q1, thresh);
-  Store16x4(&p1, &p0, &q0, &q1, p, p + 8 * stride, stride);
+  Load16x4_SSE2(p, p + 8 * stride, stride, &p1, &p0, &q0, &q1);
+  DoFilter2_SSE2(&p1, &p0, &q0, &q1, thresh);
+  Store16x4_SSE2(&p1, &p0, &q0, &q1, p, p + 8 * stride, stride);
 }
 
-static void SimpleVFilter16i(uint8_t* p, int stride, int thresh) {
+static void SimpleVFilter16i_SSE2(uint8_t* p, int stride, int thresh) {
   int k;
   for (k = 3; k > 0; --k) {
     p += 4 * stride;
-    SimpleVFilter16(p, stride, thresh);
+    SimpleVFilter16_SSE2(p, stride, thresh);
   }
 }
 
-static void SimpleHFilter16i(uint8_t* p, int stride, int thresh) {
+static void SimpleHFilter16i_SSE2(uint8_t* p, int stride, int thresh) {
   int k;
   for (k = 3; k > 0; --k) {
     p += 4;
-    SimpleHFilter16(p, stride, thresh);
+    SimpleHFilter16_SSE2(p, stride, thresh);
   }
 }
 
@@ -628,60 +634,60 @@ static void SimpleHFilter16i(uint8_t* p, int stride, int thresh) {
 // Complex In-loop filtering (Paragraph 15.3)
 
 #define MAX_DIFF1(p3, p2, p1, p0, m) do {                                      \
-  m = MM_ABS(p1, p0);                                                          \
-  m = _mm_max_epu8(m, MM_ABS(p3, p2));                                         \
-  m = _mm_max_epu8(m, MM_ABS(p2, p1));                                         \
+  (m) = MM_ABS(p1, p0);                                                        \
+  (m) = _mm_max_epu8(m, MM_ABS(p3, p2));                                       \
+  (m) = _mm_max_epu8(m, MM_ABS(p2, p1));                                       \
 } while (0)
 
 #define MAX_DIFF2(p3, p2, p1, p0, m) do {                                      \
-  m = _mm_max_epu8(m, MM_ABS(p1, p0));                                         \
-  m = _mm_max_epu8(m, MM_ABS(p3, p2));                                         \
-  m = _mm_max_epu8(m, MM_ABS(p2, p1));                                         \
+  (m) = _mm_max_epu8(m, MM_ABS(p1, p0));                                       \
+  (m) = _mm_max_epu8(m, MM_ABS(p3, p2));                                       \
+  (m) = _mm_max_epu8(m, MM_ABS(p2, p1));                                       \
 } while (0)
 
 #define LOAD_H_EDGES4(p, stride, e1, e2, e3, e4) {                             \
-  e1 = _mm_loadu_si128((__m128i*)&(p)[0 * stride]);                            \
-  e2 = _mm_loadu_si128((__m128i*)&(p)[1 * stride]);                            \
-  e3 = _mm_loadu_si128((__m128i*)&(p)[2 * stride]);                            \
-  e4 = _mm_loadu_si128((__m128i*)&(p)[3 * stride]);                            \
+  (e1) = _mm_loadu_si128((__m128i*)&(p)[0 * (stride)]);                        \
+  (e2) = _mm_loadu_si128((__m128i*)&(p)[1 * (stride)]);                        \
+  (e3) = _mm_loadu_si128((__m128i*)&(p)[2 * (stride)]);                        \
+  (e4) = _mm_loadu_si128((__m128i*)&(p)[3 * (stride)]);                        \
 }
 
 #define LOADUV_H_EDGE(p, u, v, stride) do {                                    \
   const __m128i U = _mm_loadl_epi64((__m128i*)&(u)[(stride)]);                 \
   const __m128i V = _mm_loadl_epi64((__m128i*)&(v)[(stride)]);                 \
-  p = _mm_unpacklo_epi64(U, V);                                                \
+  (p) = _mm_unpacklo_epi64(U, V);                                              \
 } while (0)
 
 #define LOADUV_H_EDGES4(u, v, stride, e1, e2, e3, e4) {                        \
-  LOADUV_H_EDGE(e1, u, v, 0 * stride);                                         \
-  LOADUV_H_EDGE(e2, u, v, 1 * stride);                                         \
-  LOADUV_H_EDGE(e3, u, v, 2 * stride);                                         \
-  LOADUV_H_EDGE(e4, u, v, 3 * stride);                                         \
+  LOADUV_H_EDGE(e1, u, v, 0 * (stride));                                       \
+  LOADUV_H_EDGE(e2, u, v, 1 * (stride));                                       \
+  LOADUV_H_EDGE(e3, u, v, 2 * (stride));                                       \
+  LOADUV_H_EDGE(e4, u, v, 3 * (stride));                                       \
 }
 
 #define STOREUV(p, u, v, stride) {                                             \
-  _mm_storel_epi64((__m128i*)&u[(stride)], p);                                 \
-  p = _mm_srli_si128(p, 8);                                                    \
-  _mm_storel_epi64((__m128i*)&v[(stride)], p);                                 \
+  _mm_storel_epi64((__m128i*)&(u)[(stride)], p);                               \
+  (p) = _mm_srli_si128(p, 8);                                                  \
+  _mm_storel_epi64((__m128i*)&(v)[(stride)], p);                               \
 }
 
-static WEBP_INLINE void ComplexMask(const __m128i* const p1,
-                                    const __m128i* const p0,
-                                    const __m128i* const q0,
-                                    const __m128i* const q1,
-                                    int thresh, int ithresh,
-                                    __m128i* const mask) {
+static WEBP_INLINE void ComplexMask_SSE2(const __m128i* const p1,
+                                         const __m128i* const p0,
+                                         const __m128i* const q0,
+                                         const __m128i* const q1,
+                                         int thresh, int ithresh,
+                                         __m128i* const mask) {
   const __m128i it = _mm_set1_epi8(ithresh);
   const __m128i diff = _mm_subs_epu8(*mask, it);
   const __m128i thresh_mask = _mm_cmpeq_epi8(diff, _mm_setzero_si128());
   __m128i filter_mask;
-  NeedsFilter(p1, p0, q0, q1, thresh, &filter_mask);
+  NeedsFilter_SSE2(p1, p0, q0, q1, thresh, &filter_mask);
   *mask = _mm_and_si128(thresh_mask, filter_mask);
 }
 
 // on macroblock edges
-static void VFilter16(uint8_t* p, int stride,
-                      int thresh, int ithresh, int hev_thresh) {
+static void VFilter16_SSE2(uint8_t* p, int stride,
+                           int thresh, int ithresh, int hev_thresh) {
   __m128i t1;
   __m128i mask;
   __m128i p2, p1, p0, q0, q1, q2;
@@ -694,8 +700,8 @@ static void VFilter16(uint8_t* p, int stride,
   LOAD_H_EDGES4(p, stride, q0, q1, q2, t1);
   MAX_DIFF2(t1, q2, q1, q0, mask);
 
-  ComplexMask(&p1, &p0, &q0, &q1, thresh, ithresh, &mask);
-  DoFilter6(&p2, &p1, &p0, &q0, &q1, &q2, &mask, hev_thresh);
+  ComplexMask_SSE2(&p1, &p0, &q0, &q1, thresh, ithresh, &mask);
+  DoFilter6_SSE2(&p2, &p1, &p0, &q0, &q1, &q2, &mask, hev_thresh);
 
   // Store
   _mm_storeu_si128((__m128i*)&p[-3 * stride], p2);
@@ -706,28 +712,28 @@ static void VFilter16(uint8_t* p, int stride,
   _mm_storeu_si128((__m128i*)&p[+2 * stride], q2);
 }
 
-static void HFilter16(uint8_t* p, int stride,
-                      int thresh, int ithresh, int hev_thresh) {
+static void HFilter16_SSE2(uint8_t* p, int stride,
+                           int thresh, int ithresh, int hev_thresh) {
   __m128i mask;
   __m128i p3, p2, p1, p0, q0, q1, q2, q3;
 
   uint8_t* const b = p - 4;
-  Load16x4(b, b + 8 * stride, stride, &p3, &p2, &p1, &p0);  // p3, p2, p1, p0
+  Load16x4_SSE2(b, b + 8 * stride, stride, &p3, &p2, &p1, &p0);
   MAX_DIFF1(p3, p2, p1, p0, mask);
 
-  Load16x4(p, p + 8 * stride, stride, &q0, &q1, &q2, &q3);  // q0, q1, q2, q3
+  Load16x4_SSE2(p, p + 8 * stride, stride, &q0, &q1, &q2, &q3);
   MAX_DIFF2(q3, q2, q1, q0, mask);
 
-  ComplexMask(&p1, &p0, &q0, &q1, thresh, ithresh, &mask);
-  DoFilter6(&p2, &p1, &p0, &q0, &q1, &q2, &mask, hev_thresh);
+  ComplexMask_SSE2(&p1, &p0, &q0, &q1, thresh, ithresh, &mask);
+  DoFilter6_SSE2(&p2, &p1, &p0, &q0, &q1, &q2, &mask, hev_thresh);
 
-  Store16x4(&p3, &p2, &p1, &p0, b, b + 8 * stride, stride);
-  Store16x4(&q0, &q1, &q2, &q3, p, p + 8 * stride, stride);
+  Store16x4_SSE2(&p3, &p2, &p1, &p0, b, b + 8 * stride, stride);
+  Store16x4_SSE2(&q0, &q1, &q2, &q3, p, p + 8 * stride, stride);
 }
 
 // on three inner edges
-static void VFilter16i(uint8_t* p, int stride,
-                       int thresh, int ithresh, int hev_thresh) {
+static void VFilter16i_SSE2(uint8_t* p, int stride,
+                            int thresh, int ithresh, int hev_thresh) {
   int k;
   __m128i p3, p2, p1, p0;   // loop invariants
 
@@ -744,8 +750,8 @@ static void VFilter16i(uint8_t* p, int stride,
 
     // p3 and p2 are not just temporary variables here: they will be
     // re-used for next span. And q2/q3 will become p1/p0 accordingly.
-    ComplexMask(&p1, &p0, &p3, &p2, thresh, ithresh, &mask);
-    DoFilter4(&p1, &p0, &p3, &p2, &mask, hev_thresh);
+    ComplexMask_SSE2(&p1, &p0, &p3, &p2, thresh, ithresh, &mask);
+    DoFilter4_SSE2(&p1, &p0, &p3, &p2, &mask, hev_thresh);
 
     // Store
     _mm_storeu_si128((__m128i*)&b[0 * stride], p1);
@@ -759,12 +765,12 @@ static void VFilter16i(uint8_t* p, int stride,
   }
 }
 
-static void HFilter16i(uint8_t* p, int stride,
-                       int thresh, int ithresh, int hev_thresh) {
+static void HFilter16i_SSE2(uint8_t* p, int stride,
+                            int thresh, int ithresh, int hev_thresh) {
   int k;
   __m128i p3, p2, p1, p0;   // loop invariants
 
-  Load16x4(p, p + 8 * stride, stride, &p3, &p2, &p1, &p0);  // prologue
+  Load16x4_SSE2(p, p + 8 * stride, stride, &p3, &p2, &p1, &p0);  // prologue
 
   for (k = 3; k > 0; --k) {
     __m128i mask, tmp1, tmp2;
@@ -773,13 +779,13 @@ static void HFilter16i(uint8_t* p, int stride,
     p += 4;  // beginning of q0 (and next span)
 
     MAX_DIFF1(p3, p2, p1, p0, mask);   // compute partial mask
-    Load16x4(p, p + 8 * stride, stride, &p3, &p2, &tmp1, &tmp2);
+    Load16x4_SSE2(p, p + 8 * stride, stride, &p3, &p2, &tmp1, &tmp2);
     MAX_DIFF2(p3, p2, tmp1, tmp2, mask);
 
-    ComplexMask(&p1, &p0, &p3, &p2, thresh, ithresh, &mask);
-    DoFilter4(&p1, &p0, &p3, &p2, &mask, hev_thresh);
+    ComplexMask_SSE2(&p1, &p0, &p3, &p2, thresh, ithresh, &mask);
+    DoFilter4_SSE2(&p1, &p0, &p3, &p2, &mask, hev_thresh);
 
-    Store16x4(&p1, &p0, &p3, &p2, b, b + 8 * stride, stride);
+    Store16x4_SSE2(&p1, &p0, &p3, &p2, b, b + 8 * stride, stride);
 
     // rotate samples
     p1 = tmp1;
@@ -788,8 +794,8 @@ static void HFilter16i(uint8_t* p, int stride,
 }
 
 // 8-pixels wide variant, for chroma filtering
-static void VFilter8(uint8_t* u, uint8_t* v, int stride,
-                     int thresh, int ithresh, int hev_thresh) {
+static void VFilter8_SSE2(uint8_t* u, uint8_t* v, int stride,
+                          int thresh, int ithresh, int hev_thresh) {
   __m128i mask;
   __m128i t1, p2, p1, p0, q0, q1, q2;
 
@@ -801,8 +807,8 @@ static void VFilter8(uint8_t* u, uint8_t* v, int stride,
   LOADUV_H_EDGES4(u, v, stride, q0, q1, q2, t1);
   MAX_DIFF2(t1, q2, q1, q0, mask);
 
-  ComplexMask(&p1, &p0, &q0, &q1, thresh, ithresh, &mask);
-  DoFilter6(&p2, &p1, &p0, &q0, &q1, &q2, &mask, hev_thresh);
+  ComplexMask_SSE2(&p1, &p0, &q0, &q1, thresh, ithresh, &mask);
+  DoFilter6_SSE2(&p2, &p1, &p0, &q0, &q1, &q2, &mask, hev_thresh);
 
   // Store
   STOREUV(p2, u, v, -3 * stride);
@@ -813,28 +819,28 @@ static void VFilter8(uint8_t* u, uint8_t* v, int stride,
   STOREUV(q2, u, v, 2 * stride);
 }
 
-static void HFilter8(uint8_t* u, uint8_t* v, int stride,
-                     int thresh, int ithresh, int hev_thresh) {
+static void HFilter8_SSE2(uint8_t* u, uint8_t* v, int stride,
+                          int thresh, int ithresh, int hev_thresh) {
   __m128i mask;
   __m128i p3, p2, p1, p0, q0, q1, q2, q3;
 
   uint8_t* const tu = u - 4;
   uint8_t* const tv = v - 4;
-  Load16x4(tu, tv, stride, &p3, &p2, &p1, &p0);  // p3, p2, p1, p0
+  Load16x4_SSE2(tu, tv, stride, &p3, &p2, &p1, &p0);
   MAX_DIFF1(p3, p2, p1, p0, mask);
 
-  Load16x4(u, v, stride, &q0, &q1, &q2, &q3);    // q0, q1, q2, q3
+  Load16x4_SSE2(u, v, stride, &q0, &q1, &q2, &q3);
   MAX_DIFF2(q3, q2, q1, q0, mask);
 
-  ComplexMask(&p1, &p0, &q0, &q1, thresh, ithresh, &mask);
-  DoFilter6(&p2, &p1, &p0, &q0, &q1, &q2, &mask, hev_thresh);
+  ComplexMask_SSE2(&p1, &p0, &q0, &q1, thresh, ithresh, &mask);
+  DoFilter6_SSE2(&p2, &p1, &p0, &q0, &q1, &q2, &mask, hev_thresh);
 
-  Store16x4(&p3, &p2, &p1, &p0, tu, tv, stride);
-  Store16x4(&q0, &q1, &q2, &q3, u, v, stride);
+  Store16x4_SSE2(&p3, &p2, &p1, &p0, tu, tv, stride);
+  Store16x4_SSE2(&q0, &q1, &q2, &q3, u, v, stride);
 }
 
-static void VFilter8i(uint8_t* u, uint8_t* v, int stride,
-                      int thresh, int ithresh, int hev_thresh) {
+static void VFilter8i_SSE2(uint8_t* u, uint8_t* v, int stride,
+                           int thresh, int ithresh, int hev_thresh) {
   __m128i mask;
   __m128i t1, t2, p1, p0, q0, q1;
 
@@ -849,8 +855,8 @@ static void VFilter8i(uint8_t* u, uint8_t* v, int stride,
   LOADUV_H_EDGES4(u, v, stride, q0, q1, t1, t2);
   MAX_DIFF2(t2, t1, q1, q0, mask);
 
-  ComplexMask(&p1, &p0, &q0, &q1, thresh, ithresh, &mask);
-  DoFilter4(&p1, &p0, &q0, &q1, &mask, hev_thresh);
+  ComplexMask_SSE2(&p1, &p0, &q0, &q1, thresh, ithresh, &mask);
+  DoFilter4_SSE2(&p1, &p0, &q0, &q1, &mask, hev_thresh);
 
   // Store
   STOREUV(p1, u, v, -2 * stride);
@@ -859,24 +865,24 @@ static void VFilter8i(uint8_t* u, uint8_t* v, int stride,
   STOREUV(q1, u, v, 1 * stride);
 }
 
-static void HFilter8i(uint8_t* u, uint8_t* v, int stride,
-                      int thresh, int ithresh, int hev_thresh) {
+static void HFilter8i_SSE2(uint8_t* u, uint8_t* v, int stride,
+                           int thresh, int ithresh, int hev_thresh) {
   __m128i mask;
   __m128i t1, t2, p1, p0, q0, q1;
-  Load16x4(u, v, stride, &t2, &t1, &p1, &p0);   // p3, p2, p1, p0
+  Load16x4_SSE2(u, v, stride, &t2, &t1, &p1, &p0);   // p3, p2, p1, p0
   MAX_DIFF1(t2, t1, p1, p0, mask);
 
   u += 4;  // beginning of q0
   v += 4;
-  Load16x4(u, v, stride, &q0, &q1, &t1, &t2);  // q0, q1, q2, q3
+  Load16x4_SSE2(u, v, stride, &q0, &q1, &t1, &t2);  // q0, q1, q2, q3
   MAX_DIFF2(t2, t1, q1, q0, mask);
 
-  ComplexMask(&p1, &p0, &q0, &q1, thresh, ithresh, &mask);
-  DoFilter4(&p1, &p0, &q0, &q1, &mask, hev_thresh);
+  ComplexMask_SSE2(&p1, &p0, &q0, &q1, thresh, ithresh, &mask);
+  DoFilter4_SSE2(&p1, &p0, &q0, &q1, &mask, hev_thresh);
 
   u -= 2;  // beginning of p1
   v -= 2;
-  Store16x4(&p1, &p0, &q0, &q1, u, v, stride);
+  Store16x4_SSE2(&p1, &p0, &q0, &q1, u, v, stride);
 }
 
 //------------------------------------------------------------------------------
@@ -893,7 +899,7 @@ static void HFilter8i(uint8_t* u, uint8_t* v, int stride,
 //   where: AC = (a + b + 1) >> 1,   BC = (b + c + 1) >> 1
 //   and ab = a ^ b, bc = b ^ c, lsb = (AC^BC)&1
 
-static void VE4(uint8_t* dst) {    // vertical
+static void VE4_SSE2(uint8_t* dst) {    // vertical
   const __m128i one = _mm_set1_epi8(1);
   const __m128i ABCDEFGH = _mm_loadl_epi64((__m128i*)(dst - BPS - 1));
   const __m128i BCDEFGH0 = _mm_srli_si128(ABCDEFGH, 1);
@@ -909,7 +915,7 @@ static void VE4(uint8_t* dst) {    // vertical
   }
 }
 
-static void LD4(uint8_t* dst) {   // Down-Left
+static void LD4_SSE2(uint8_t* dst) {   // Down-Left
   const __m128i one = _mm_set1_epi8(1);
   const __m128i ABCDEFGH = _mm_loadl_epi64((__m128i*)(dst - BPS));
   const __m128i BCDEFGH0 = _mm_srli_si128(ABCDEFGH, 1);
@@ -925,7 +931,7 @@ static void LD4(uint8_t* dst) {   // Down-Left
   WebPUint32ToMem(dst + 3 * BPS, _mm_cvtsi128_si32(_mm_srli_si128(abcdefg, 3)));
 }
 
-static void VR4(uint8_t* dst) {   // Vertical-Right
+static void VR4_SSE2(uint8_t* dst) {   // Vertical-Right
   const __m128i one = _mm_set1_epi8(1);
   const int I = dst[-1 + 0 * BPS];
   const int J = dst[-1 + 1 * BPS];
@@ -950,7 +956,7 @@ static void VR4(uint8_t* dst) {   // Vertical-Right
   DST(0, 3) = AVG3(K, J, I);
 }
 
-static void VL4(uint8_t* dst) {   // Vertical-Left
+static void VL4_SSE2(uint8_t* dst) {   // Vertical-Left
   const __m128i one = _mm_set1_epi8(1);
   const __m128i ABCDEFGH = _mm_loadl_epi64((__m128i*)(dst - BPS));
   const __m128i BCDEFGH_ = _mm_srli_si128(ABCDEFGH, 1);
@@ -975,7 +981,7 @@ static void VL4(uint8_t* dst) {   // Vertical-Left
   DST(3, 3) = (extra_out >> 8) & 0xff;
 }
 
-static void RD4(uint8_t* dst) {   // Down-right
+static void RD4_SSE2(uint8_t* dst) {   // Down-right
   const __m128i one = _mm_set1_epi8(1);
   const __m128i XABCD = _mm_loadl_epi64((__m128i*)(dst - BPS - 1));
   const __m128i ____XABCD = _mm_slli_si128(XABCD, 4);
@@ -1004,7 +1010,7 @@ static void RD4(uint8_t* dst) {   // Down-right
 //------------------------------------------------------------------------------
 // Luma 16x16
 
-static WEBP_INLINE void TrueMotion(uint8_t* dst, int size) {
+static WEBP_INLINE void TrueMotion_SSE2(uint8_t* dst, int size) {
   const uint8_t* top = dst - BPS;
   const __m128i zero = _mm_setzero_si128();
   int y;
@@ -1041,11 +1047,11 @@ static WEBP_INLINE void TrueMotion(uint8_t* dst, int size) {
   }
 }
 
-static void TM4(uint8_t* dst)   { TrueMotion(dst, 4); }
-static void TM8uv(uint8_t* dst) { TrueMotion(dst, 8); }
-static void TM16(uint8_t* dst)  { TrueMotion(dst, 16); }
+static void TM4_SSE2(uint8_t* dst)   { TrueMotion_SSE2(dst, 4); }
+static void TM8uv_SSE2(uint8_t* dst) { TrueMotion_SSE2(dst, 8); }
+static void TM16_SSE2(uint8_t* dst)  { TrueMotion_SSE2(dst, 16); }
 
-static void VE16(uint8_t* dst) {
+static void VE16_SSE2(uint8_t* dst) {
   const __m128i top = _mm_loadu_si128((const __m128i*)(dst - BPS));
   int j;
   for (j = 0; j < 16; ++j) {
@@ -1053,7 +1059,7 @@ static void VE16(uint8_t* dst) {
   }
 }
 
-static void HE16(uint8_t* dst) {     // horizontal
+static void HE16_SSE2(uint8_t* dst) {     // horizontal
   int j;
   for (j = 16; j > 0; --j) {
     const __m128i values = _mm_set1_epi8(dst[-1]);
@@ -1062,7 +1068,7 @@ static void HE16(uint8_t* dst) {     // horizontal
   }
 }
 
-static WEBP_INLINE void Put16(uint8_t v, uint8_t* dst) {
+static WEBP_INLINE void Put16_SSE2(uint8_t v, uint8_t* dst) {
   int j;
   const __m128i values = _mm_set1_epi8(v);
   for (j = 0; j < 16; ++j) {
@@ -1070,7 +1076,7 @@ static WEBP_INLINE void Put16(uint8_t v, uint8_t* dst) {
   }
 }
 
-static void DC16(uint8_t* dst) {    // DC
+static void DC16_SSE2(uint8_t* dst) {  // DC
   const __m128i zero = _mm_setzero_si128();
   const __m128i top = _mm_loadu_si128((const __m128i*)(dst - BPS));
   const __m128i sad8x2 = _mm_sad_epu8(top, zero);
@@ -1083,37 +1089,37 @@ static void DC16(uint8_t* dst) {    // DC
   }
   {
     const int DC = _mm_cvtsi128_si32(sum) + left + 16;
-    Put16(DC >> 5, dst);
+    Put16_SSE2(DC >> 5, dst);
   }
 }
 
-static void DC16NoTop(uint8_t* dst) {   // DC with top samples not available
+static void DC16NoTop_SSE2(uint8_t* dst) {  // DC with top samples unavailable
   int DC = 8;
   int j;
   for (j = 0; j < 16; ++j) {
     DC += dst[-1 + j * BPS];
   }
-  Put16(DC >> 4, dst);
+  Put16_SSE2(DC >> 4, dst);
 }
 
-static void DC16NoLeft(uint8_t* dst) {  // DC with left samples not available
+static void DC16NoLeft_SSE2(uint8_t* dst) {  // DC with left samples unavailable
   const __m128i zero = _mm_setzero_si128();
   const __m128i top = _mm_loadu_si128((const __m128i*)(dst - BPS));
   const __m128i sad8x2 = _mm_sad_epu8(top, zero);
   // sum the two sads: sad8x2[0:1] + sad8x2[8:9]
   const __m128i sum = _mm_add_epi16(sad8x2, _mm_shuffle_epi32(sad8x2, 2));
   const int DC = _mm_cvtsi128_si32(sum) + 8;
-  Put16(DC >> 4, dst);
+  Put16_SSE2(DC >> 4, dst);
 }
 
-static void DC16NoTopLeft(uint8_t* dst) {  // DC with no top and left samples
-  Put16(0x80, dst);
+static void DC16NoTopLeft_SSE2(uint8_t* dst) {  // DC with no top & left samples
+  Put16_SSE2(0x80, dst);
 }
 
 //------------------------------------------------------------------------------
 // Chroma
 
-static void VE8uv(uint8_t* dst) {    // vertical
+static void VE8uv_SSE2(uint8_t* dst) {    // vertical
   int j;
   const __m128i top = _mm_loadl_epi64((const __m128i*)(dst - BPS));
   for (j = 0; j < 8; ++j) {
@@ -1121,17 +1127,8 @@ static void VE8uv(uint8_t* dst) {    // vertical
   }
 }
 
-static void HE8uv(uint8_t* dst) {    // horizontal
-  int j;
-  for (j = 0; j < 8; ++j) {
-    const __m128i values = _mm_set1_epi8(dst[-1]);
-    _mm_storel_epi64((__m128i*)dst, values);
-    dst += BPS;
-  }
-}
-
 // helper for chroma-DC predictions
-static WEBP_INLINE void Put8x8uv(uint8_t v, uint8_t* dst) {
+static WEBP_INLINE void Put8x8uv_SSE2(uint8_t v, uint8_t* dst) {
   int j;
   const __m128i values = _mm_set1_epi8(v);
   for (j = 0; j < 8; ++j) {
@@ -1139,7 +1136,7 @@ static WEBP_INLINE void Put8x8uv(uint8_t v, uint8_t* dst) {
   }
 }
 
-static void DC8uv(uint8_t* dst) {     // DC
+static void DC8uv_SSE2(uint8_t* dst) {     // DC
   const __m128i zero = _mm_setzero_si128();
   const __m128i top = _mm_loadl_epi64((const __m128i*)(dst - BPS));
   const __m128i sum = _mm_sad_epu8(top, zero);
@@ -1150,29 +1147,29 @@ static void DC8uv(uint8_t* dst) {     // DC
   }
   {
     const int DC = _mm_cvtsi128_si32(sum) + left + 8;
-    Put8x8uv(DC >> 4, dst);
+    Put8x8uv_SSE2(DC >> 4, dst);
   }
 }
 
-static void DC8uvNoLeft(uint8_t* dst) {   // DC with no left samples
+static void DC8uvNoLeft_SSE2(uint8_t* dst) {   // DC with no left samples
   const __m128i zero = _mm_setzero_si128();
   const __m128i top = _mm_loadl_epi64((const __m128i*)(dst - BPS));
   const __m128i sum = _mm_sad_epu8(top, zero);
   const int DC = _mm_cvtsi128_si32(sum) + 4;
-  Put8x8uv(DC >> 3, dst);
+  Put8x8uv_SSE2(DC >> 3, dst);
 }
 
-static void DC8uvNoTop(uint8_t* dst) {  // DC with no top samples
+static void DC8uvNoTop_SSE2(uint8_t* dst) {  // DC with no top samples
   int dc0 = 4;
   int i;
   for (i = 0; i < 8; ++i) {
     dc0 += dst[-1 + i * BPS];
   }
-  Put8x8uv(dc0 >> 3, dst);
+  Put8x8uv_SSE2(dc0 >> 3, dst);
 }
 
-static void DC8uvNoTopLeft(uint8_t* dst) {    // DC with nothing
-  Put8x8uv(0x80, dst);
+static void DC8uvNoTopLeft_SSE2(uint8_t* dst) {    // DC with nothing
+  Put8x8uv_SSE2(0x80, dst);
 }
 
 //------------------------------------------------------------------------------
@@ -1181,47 +1178,46 @@ static void DC8uvNoTopLeft(uint8_t* dst) {    // DC with nothing
 extern void VP8DspInitSSE2(void);
 
 WEBP_TSAN_IGNORE_FUNCTION void VP8DspInitSSE2(void) {
-  VP8Transform = Transform;
-#if defined(USE_TRANSFORM_AC3)
-  VP8TransformAC3 = TransformAC3;
+  VP8Transform = Transform_SSE2;
+#if (USE_TRANSFORM_AC3 == 1)
+  VP8TransformAC3 = TransformAC3_SSE2;
 #endif
 
-  VP8VFilter16 = VFilter16;
-  VP8HFilter16 = HFilter16;
-  VP8VFilter8 = VFilter8;
-  VP8HFilter8 = HFilter8;
-  VP8VFilter16i = VFilter16i;
-  VP8HFilter16i = HFilter16i;
-  VP8VFilter8i = VFilter8i;
-  VP8HFilter8i = HFilter8i;
+  VP8VFilter16 = VFilter16_SSE2;
+  VP8HFilter16 = HFilter16_SSE2;
+  VP8VFilter8 = VFilter8_SSE2;
+  VP8HFilter8 = HFilter8_SSE2;
+  VP8VFilter16i = VFilter16i_SSE2;
+  VP8HFilter16i = HFilter16i_SSE2;
+  VP8VFilter8i = VFilter8i_SSE2;
+  VP8HFilter8i = HFilter8i_SSE2;
 
-  VP8SimpleVFilter16 = SimpleVFilter16;
-  VP8SimpleHFilter16 = SimpleHFilter16;
-  VP8SimpleVFilter16i = SimpleVFilter16i;
-  VP8SimpleHFilter16i = SimpleHFilter16i;
+  VP8SimpleVFilter16 = SimpleVFilter16_SSE2;
+  VP8SimpleHFilter16 = SimpleHFilter16_SSE2;
+  VP8SimpleVFilter16i = SimpleVFilter16i_SSE2;
+  VP8SimpleHFilter16i = SimpleHFilter16i_SSE2;
 
-  VP8PredLuma4[1] = TM4;
-  VP8PredLuma4[2] = VE4;
-  VP8PredLuma4[4] = RD4;
-  VP8PredLuma4[5] = VR4;
-  VP8PredLuma4[6] = LD4;
-  VP8PredLuma4[7] = VL4;
+  VP8PredLuma4[1] = TM4_SSE2;
+  VP8PredLuma4[2] = VE4_SSE2;
+  VP8PredLuma4[4] = RD4_SSE2;
+  VP8PredLuma4[5] = VR4_SSE2;
+  VP8PredLuma4[6] = LD4_SSE2;
+  VP8PredLuma4[7] = VL4_SSE2;
 
-  VP8PredLuma16[0] = DC16;
-  VP8PredLuma16[1] = TM16;
-  VP8PredLuma16[2] = VE16;
-  VP8PredLuma16[3] = HE16;
-  VP8PredLuma16[4] = DC16NoTop;
-  VP8PredLuma16[5] = DC16NoLeft;
-  VP8PredLuma16[6] = DC16NoTopLeft;
+  VP8PredLuma16[0] = DC16_SSE2;
+  VP8PredLuma16[1] = TM16_SSE2;
+  VP8PredLuma16[2] = VE16_SSE2;
+  VP8PredLuma16[3] = HE16_SSE2;
+  VP8PredLuma16[4] = DC16NoTop_SSE2;
+  VP8PredLuma16[5] = DC16NoLeft_SSE2;
+  VP8PredLuma16[6] = DC16NoTopLeft_SSE2;
 
-  VP8PredChroma8[0] = DC8uv;
-  VP8PredChroma8[1] = TM8uv;
-  VP8PredChroma8[2] = VE8uv;
-  VP8PredChroma8[3] = HE8uv;
-  VP8PredChroma8[4] = DC8uvNoTop;
-  VP8PredChroma8[5] = DC8uvNoLeft;
-  VP8PredChroma8[6] = DC8uvNoTopLeft;
+  VP8PredChroma8[0] = DC8uv_SSE2;
+  VP8PredChroma8[1] = TM8uv_SSE2;
+  VP8PredChroma8[2] = VE8uv_SSE2;
+  VP8PredChroma8[4] = DC8uvNoTop_SSE2;
+  VP8PredChroma8[5] = DC8uvNoLeft_SSE2;
+  VP8PredChroma8[6] = DC8uvNoTopLeft_SSE2;
 }
 
 #else  // !WEBP_USE_SSE2

src/dsp/dec_sse41.c

@@ -11,15 +11,15 @@
 //
 // Author: Skal (pascal.massimino@gmail.com)
 
-#include "./dsp.h"
+#include "src/dsp/dsp.h"
 
 #if defined(WEBP_USE_SSE41)
 
 #include <smmintrin.h>
-#include "../dec/vp8i_dec.h"
-#include "../utils/utils.h"
+#include "src/dec/vp8i_dec.h"
+#include "src/utils/utils.h"
 
-static void HE16(uint8_t* dst) {     // horizontal
+static void HE16_SSE41(uint8_t* dst) {     // horizontal
   int j;
   const __m128i kShuffle3 = _mm_set1_epi8(3);
   for (j = 16; j > 0; --j) {
@@ -36,7 +36,7 @@ static void HE16(uint8_t* dst) {     // horizontal
 extern void VP8DspInitSSE41(void);
 
 WEBP_TSAN_IGNORE_FUNCTION void VP8DspInitSSE41(void) {
-  VP8PredLuma16[3] = HE16;
+  VP8PredLuma16[3] = HE16_SSE41;
 }
 
 #else  // !WEBP_USE_SSE41

src/dsp/dsp.h

@@ -15,10 +15,10 @@
 #define WEBP_DSP_DSP_H_
 
 #ifdef HAVE_CONFIG_H
-#include "../webp/config.h"
+#include "src/webp/config.h"
 #endif
 
-#include "../webp/types.h"
+#include "src/webp/types.h"
 
 #ifdef __cplusplus
 extern "C" {
@@ -51,9 +51,8 @@ extern "C" {
 # define __has_builtin(x) 0
 #endif
 
-// For now, none of the optimizations below are available in emscripten.
-// WebAssembly overrides native optimizations.
-#if !(defined(EMSCRIPTEN) || defined(WEBP_USE_WASM))
+// for now, none of the optimizations below are available in emscripten
+#if !defined(EMSCRIPTEN)
 
 #if defined(_MSC_VER) && _MSC_VER > 1310 && \
     (defined(_M_X64) || defined(_M_IX86))
@@ -105,7 +104,7 @@ extern "C" {
 #define WEBP_USE_MIPS32
 #if (__mips_isa_rev >= 2)
 #define WEBP_USE_MIPS32_R2
-#if defined(__mips_dspr2) || (__mips_dsp_rev >= 2)
+#if defined(__mips_dspr2) || (defined(__mips_dsp_rev) && __mips_dsp_rev >= 2)
 #define WEBP_USE_MIPS_DSP_R2
 #endif
 #endif
@@ -117,6 +116,22 @@ extern "C" {
 
 #endif  /* EMSCRIPTEN */
 
+#ifndef WEBP_DSP_OMIT_C_CODE
+#define WEBP_DSP_OMIT_C_CODE 1
+#endif
+
+#if (defined(__aarch64__) || defined(__ARM_NEON__)) && WEBP_DSP_OMIT_C_CODE
+#define WEBP_NEON_OMIT_C_CODE 1
+#else
+#define WEBP_NEON_OMIT_C_CODE 0
+#endif
+
+#if !(LOCAL_CLANG_PREREQ(3,8) || LOCAL_GCC_PREREQ(4,8) || defined(__aarch64__))
+#define WEBP_NEON_WORK_AROUND_GCC 1
+#else
+#define WEBP_NEON_WORK_AROUND_GCC 0
+#endif
+
 // This macro prevents thread_sanitizer from reporting known concurrent writes.
 #define WEBP_TSAN_IGNORE_FUNCTION
 #if defined(__has_feature)
@@ -146,6 +161,18 @@ extern "C" {
 #endif
 #endif
 
+// Regularize the definition of WEBP_SWAP_16BIT_CSP (backward compatibility)
+#if !defined(WEBP_SWAP_16BIT_CSP)
+#define WEBP_SWAP_16BIT_CSP 0
+#endif
+
+// some endian fix (e.g.: mips-gcc doesn't define __BIG_ENDIAN__)
+#if !defined(WORDS_BIGENDIAN) && \
+    (defined(__BIG_ENDIAN__) || defined(_M_PPC) || \
+     (defined(__BYTE_ORDER__) && (__BYTE_ORDER__ == __ORDER_BIG_ENDIAN__)))
+#define WORDS_BIGENDIAN
+#endif
+
 typedef enum {
   kSSE2,
   kSSE3,
@@ -156,12 +183,11 @@ typedef enum {
   kNEON,
   kMIPS32,
   kMIPSdspR2,
-  kMSA,
-  kWASM
+  kMSA
 } CPUFeature;
 // returns true if the CPU supports the feature.
 typedef int (*VP8CPUInfo)(CPUFeature feature);
-WEBP_EXTERN(VP8CPUInfo) VP8GetCPUInfo;
+WEBP_EXTERN VP8CPUInfo VP8GetCPUInfo;
 
 //------------------------------------------------------------------------------
 // Init stub generator
@@ -289,6 +315,7 @@ typedef double (*VP8SSIMGetClippedFunc)(const uint8_t* src1, int stride1,
                                         int xo, int yo,  // center position
                                         int W, int H);   // plane dimension
 
+#if !defined(WEBP_REDUCE_SIZE)
 // This version is called with the guarantee that you can load 8 bytes and
 // 8 rows at offset src1 and src2
 typedef double (*VP8SSIMGetFunc)(const uint8_t* src1, int stride1,
@@ -296,10 +323,13 @@ typedef double (*VP8SSIMGetFunc)(const uint8_t* src1, int stride1,
 
 extern VP8SSIMGetFunc VP8SSIMGet;         // unclipped / unchecked
 extern VP8SSIMGetClippedFunc VP8SSIMGetClipped;   // with clipping
+#endif
 
+#if !defined(WEBP_DISABLE_STATS)
 typedef uint32_t (*VP8AccumulateSSEFunc)(const uint8_t* src1,
                                          const uint8_t* src2, int len);
 extern VP8AccumulateSSEFunc VP8AccumulateSSE;
+#endif
 
 // must be called before using any of the above directly
 void VP8SSIMDspInit(void);
@@ -480,12 +510,12 @@ extern WebPRescalerExportRowFunc WebPRescalerExportRowExpand;
 extern WebPRescalerExportRowFunc WebPRescalerExportRowShrink;
 
 // Plain-C implementation, as fall-back.
-extern void WebPRescalerImportRowExpandC(struct WebPRescaler* const wrk,
-                                         const uint8_t* src);
-extern void WebPRescalerImportRowShrinkC(struct WebPRescaler* const wrk,
-                                         const uint8_t* src);
-extern void WebPRescalerExportRowExpandC(struct WebPRescaler* const wrk);
-extern void WebPRescalerExportRowShrinkC(struct WebPRescaler* const wrk);
+extern void WebPRescalerImportRowExpand_C(struct WebPRescaler* const wrk,
+                                          const uint8_t* src);
+extern void WebPRescalerImportRowShrink_C(struct WebPRescaler* const wrk,
+                                          const uint8_t* src);
+extern void WebPRescalerExportRowExpand_C(struct WebPRescaler* const wrk);
+extern void WebPRescalerExportRowShrink_C(struct WebPRescaler* const wrk);
 
 // Main entry calls:
 extern void WebPRescalerImportRow(struct WebPRescaler* const wrk,
@@ -551,25 +581,29 @@ void WebPMultRows(uint8_t* ptr, int stride,
                   int width, int num_rows, int inverse);
 
 // Plain-C versions, used as fallback by some implementations.
-void WebPMultRowC(uint8_t* const ptr, const uint8_t* const alpha,
-                  int width, int inverse);
-void WebPMultARGBRowC(uint32_t* const ptr, int width, int inverse);
+void WebPMultRow_C(uint8_t* const ptr, const uint8_t* const alpha,
+                   int width, int inverse);
+void WebPMultARGBRow_C(uint32_t* const ptr, int width, int inverse);
+
+#ifdef WORDS_BIGENDIAN
+// ARGB packing function: a/r/g/b input is rgba or bgra order.
+extern void (*WebPPackARGB)(const uint8_t* a, const uint8_t* r,
+                            const uint8_t* g, const uint8_t* b, int len,
+                            uint32_t* out);
+#endif
+
+// RGB packing function. 'step' can be 3 or 4. r/g/b input is rgb or bgr order.
+extern void (*WebPPackRGB)(const uint8_t* r, const uint8_t* g, const uint8_t* b,
+                           int len, int step, uint32_t* out);
+
+// This function returns true if src[i] contains a value different from 0xff.
+extern int (*WebPHasAlpha8b)(const uint8_t* src, int length);
+// This function returns true if src[4*i] contains a value different from 0xff.
+extern int (*WebPHasAlpha32b)(const uint8_t* src, int length);
 
 // To be called first before using the above.
 void WebPInitAlphaProcessing(void);
 
-// ARGB packing function: a/r/g/b input is rgba or bgra order.
-extern void (*VP8PackARGB)(const uint8_t* a, const uint8_t* r,
-                           const uint8_t* g, const uint8_t* b, int len,
-                           uint32_t* out);
-
-// RGB packing function. 'step' can be 3 or 4. r/g/b input is rgb or bgr order.
-extern void (*VP8PackRGB)(const uint8_t* r, const uint8_t* g, const uint8_t* b,
-                          int len, int step, uint32_t* out);
-
-// To be called first before using the above.
-void VP8EncDspARGBInit(void);
-
 //------------------------------------------------------------------------------
 // Filter functions
 

src/dsp/enc.c

@@ -14,16 +14,18 @@
 #include <assert.h>
 #include <stdlib.h>  // for abs()
 
-#include "./dsp.h"
-#include "../enc/vp8i_enc.h"
+#include "src/dsp/dsp.h"
+#include "src/enc/vp8i_enc.h"
 
 static WEBP_INLINE uint8_t clip_8b(int v) {
   return (!(v & ~0xff)) ? v : (v < 0) ? 0 : 255;
 }
 
+#if !WEBP_NEON_OMIT_C_CODE
 static WEBP_INLINE int clip_max(int v, int max) {
   return (v > max) ? max : v;
 }
+#endif  // !WEBP_NEON_OMIT_C_CODE
 
 //------------------------------------------------------------------------------
 // Compute susceptibility based on DCT-coeff histograms:
@@ -56,9 +58,10 @@ void VP8SetHistogramData(const int distribution[MAX_COEFF_THRESH + 1],
   histo->last_non_zero = last_non_zero;
 }
 
-static void CollectHistogram(const uint8_t* ref, const uint8_t* pred,
-                             int start_block, int end_block,
-                             VP8Histogram* const histo) {
+#if !WEBP_NEON_OMIT_C_CODE
+static void CollectHistogram_C(const uint8_t* ref, const uint8_t* pred,
+                               int start_block, int end_block,
+                               VP8Histogram* const histo) {
   int j;
   int distribution[MAX_COEFF_THRESH + 1] = { 0 };
   for (j = start_block; j < end_block; ++j) {
@@ -76,6 +79,7 @@ static void CollectHistogram(const uint8_t* ref, const uint8_t* pred,
   }
   VP8SetHistogramData(distribution, histo);
 }
+#endif  // !WEBP_NEON_OMIT_C_CODE
 
 //------------------------------------------------------------------------------
 // run-time tables (~4k)
@@ -100,6 +104,8 @@ static WEBP_TSAN_IGNORE_FUNCTION void InitTables(void) {
 //------------------------------------------------------------------------------
 // Transforms (Paragraph 14.4)
 
+#if !WEBP_NEON_OMIT_C_CODE
+
 #define STORE(x, y, v) \
   dst[(x) + (y) * BPS] = clip_8b(ref[(x) + (y) * BPS] + ((v) >> 3))
 
@@ -140,15 +146,15 @@ static WEBP_INLINE void ITransformOne(const uint8_t* ref, const int16_t* in,
   }
 }
 
-static void ITransform(const uint8_t* ref, const int16_t* in, uint8_t* dst,
-                       int do_two) {
+static void ITransform_C(const uint8_t* ref, const int16_t* in, uint8_t* dst,
+                         int do_two) {
   ITransformOne(ref, in, dst);
   if (do_two) {
     ITransformOne(ref + 4, in + 16, dst + 4);
   }
 }
 
-static void FTransform(const uint8_t* src, const uint8_t* ref, int16_t* out) {
+static void FTransform_C(const uint8_t* src, const uint8_t* ref, int16_t* out) {
   int i;
   int tmp[16];
   for (i = 0; i < 4; ++i, src += BPS, ref += BPS) {
@@ -176,13 +182,16 @@ static void FTransform(const uint8_t* src, const uint8_t* ref, int16_t* out) {
     out[12+ i] = ((a3 * 2217 - a2 * 5352 + 51000) >> 16);
   }
 }
+#endif  // !WEBP_NEON_OMIT_C_CODE
 
-static void FTransform2(const uint8_t* src, const uint8_t* ref, int16_t* out) {
+static void FTransform2_C(const uint8_t* src, const uint8_t* ref,
+                          int16_t* out) {
   VP8FTransform(src, ref, out);
   VP8FTransform(src + 4, ref + 4, out + 16);
 }
 
-static void FTransformWHT(const int16_t* in, int16_t* out) {
+#if !WEBP_NEON_OMIT_C_CODE
+static void FTransformWHT_C(const int16_t* in, int16_t* out) {
   // input is 12b signed
   int32_t tmp[16];
   int i;
@@ -211,6 +220,7 @@ static void FTransformWHT(const int16_t* in, int16_t* out) {
     out[12 + i] = b3 >> 1;
   }
 }
+#endif  // !WEBP_NEON_OMIT_C_CODE
 
 #undef MUL
 #undef STORE
@@ -303,8 +313,8 @@ static WEBP_INLINE void DCMode(uint8_t* dst, const uint8_t* left,
 //------------------------------------------------------------------------------
 // Chroma 8x8 prediction (paragraph 12.2)
 
-static void IntraChromaPreds(uint8_t* dst, const uint8_t* left,
-                             const uint8_t* top) {
+static void IntraChromaPreds_C(uint8_t* dst, const uint8_t* left,
+                               const uint8_t* top) {
   // U block
   DCMode(C8DC8 + dst, left, top, 8, 8, 4);
   VerticalPred(C8VE8 + dst, top, 8);
@@ -323,8 +333,8 @@ static void IntraChromaPreds(uint8_t* dst, const uint8_t* left,
 //------------------------------------------------------------------------------
 // luma 16x16 prediction (paragraph 12.3)
 
-static void Intra16Preds(uint8_t* dst,
-                         const uint8_t* left, const uint8_t* top) {
+static void Intra16Preds_C(uint8_t* dst,
+                           const uint8_t* left, const uint8_t* top) {
   DCMode(I16DC16 + dst, left, top, 16, 16, 5);
   VerticalPred(I16VE16 + dst, top, 16);
   HorizontalPred(I16HE16 + dst, left, 16);
@@ -507,7 +517,7 @@ static void TM4(uint8_t* dst, const uint8_t* top) {
 
 // Left samples are top[-5 .. -2], top_left is top[-1], top are
 // located at top[0..3], and top right is top[4..7]
-static void Intra4Preds(uint8_t* dst, const uint8_t* top) {
+static void Intra4Preds_C(uint8_t* dst, const uint8_t* top) {
   DC4(I4DC4 + dst, top);
   TM4(I4TM4 + dst, top);
   VE4(I4VE4 + dst, top);
@@ -523,6 +533,7 @@ static void Intra4Preds(uint8_t* dst, const uint8_t* top) {
 //------------------------------------------------------------------------------
 // Metric
 
+#if !WEBP_NEON_OMIT_C_CODE
 static WEBP_INLINE int GetSSE(const uint8_t* a, const uint8_t* b,
                               int w, int h) {
   int count = 0;
@@ -538,20 +549,21 @@ static WEBP_INLINE int GetSSE(const uint8_t* a, const uint8_t* b,
   return count;
 }
 
-static int SSE16x16(const uint8_t* a, const uint8_t* b) {
+static int SSE16x16_C(const uint8_t* a, const uint8_t* b) {
   return GetSSE(a, b, 16, 16);
 }
-static int SSE16x8(const uint8_t* a, const uint8_t* b) {
+static int SSE16x8_C(const uint8_t* a, const uint8_t* b) {
   return GetSSE(a, b, 16, 8);
 }
-static int SSE8x8(const uint8_t* a, const uint8_t* b) {
+static int SSE8x8_C(const uint8_t* a, const uint8_t* b) {
   return GetSSE(a, b, 8, 8);
 }
-static int SSE4x4(const uint8_t* a, const uint8_t* b) {
+static int SSE4x4_C(const uint8_t* a, const uint8_t* b) {
   return GetSSE(a, b, 4, 4);
 }
+#endif  // !WEBP_NEON_OMIT_C_CODE
 
-static void Mean16x4(const uint8_t* ref, uint32_t dc[4]) {
+static void Mean16x4_C(const uint8_t* ref, uint32_t dc[4]) {
   int k, x, y;
   for (k = 0; k < 4; ++k) {
     uint32_t avg = 0;
@@ -571,6 +583,7 @@ static void Mean16x4(const uint8_t* ref, uint32_t dc[4]) {
 // We try to match the spectral content (weighted) between source and
 // reconstructed samples.
 
+#if !WEBP_NEON_OMIT_C_CODE
 // Hadamard transform
 // Returns the weighted sum of the absolute value of transformed coefficients.
 // w[] contains a row-major 4 by 4 symmetric matrix.
@@ -608,24 +621,25 @@ static int TTransform(const uint8_t* in, const uint16_t* w) {
   return sum;
 }
 
-static int Disto4x4(const uint8_t* const a, const uint8_t* const b,
-                    const uint16_t* const w) {
+static int Disto4x4_C(const uint8_t* const a, const uint8_t* const b,
+                      const uint16_t* const w) {
   const int sum1 = TTransform(a, w);
   const int sum2 = TTransform(b, w);
   return abs(sum2 - sum1) >> 5;
 }
 
-static int Disto16x16(const uint8_t* const a, const uint8_t* const b,
-                      const uint16_t* const w) {
+static int Disto16x16_C(const uint8_t* const a, const uint8_t* const b,
+                        const uint16_t* const w) {
   int D = 0;
   int x, y;
   for (y = 0; y < 16 * BPS; y += 4 * BPS) {
     for (x = 0; x < 16; x += 4) {
-      D += Disto4x4(a + x + y, b + x + y, w);
+      D += Disto4x4_C(a + x + y, b + x + y, w);
     }
   }
   return D;
 }
+#endif  // !WEBP_NEON_OMIT_C_CODE
 
 //------------------------------------------------------------------------------
 // Quantization
@@ -636,8 +650,8 @@ static const uint8_t kZigzag[16] = {
 };
 
 // Simple quantization
-static int QuantizeBlock(int16_t in[16], int16_t out[16],
-                         const VP8Matrix* const mtx) {
+static int QuantizeBlock_C(int16_t in[16], int16_t out[16],
+                           const VP8Matrix* const mtx) {
   int last = -1;
   int n;
   for (n = 0; n < 16; ++n) {
@@ -662,13 +676,15 @@ static int QuantizeBlock(int16_t in[16], int16_t out[16],
   return (last >= 0);
 }
 
-static int Quantize2Blocks(int16_t in[32], int16_t out[32],
-                           const VP8Matrix* const mtx) {
+#if !WEBP_NEON_OMIT_C_CODE || WEBP_NEON_WORK_AROUND_GCC
+static int Quantize2Blocks_C(int16_t in[32], int16_t out[32],
+                             const VP8Matrix* const mtx) {
   int nz;
   nz  = VP8EncQuantizeBlock(in + 0 * 16, out + 0 * 16, mtx) << 0;
   nz |= VP8EncQuantizeBlock(in + 1 * 16, out + 1 * 16, mtx) << 1;
   return nz;
 }
+#endif  // !WEBP_NEON_OMIT_C_CODE || WEBP_NEON_WORK_AROUND_GCC
 
 //------------------------------------------------------------------------------
 // Block copy
@@ -682,11 +698,11 @@ static WEBP_INLINE void Copy(const uint8_t* src, uint8_t* dst, int w, int h) {
   }
 }
 
-static void Copy4x4(const uint8_t* src, uint8_t* dst) {
+static void Copy4x4_C(const uint8_t* src, uint8_t* dst) {
   Copy(src, dst, 4, 4);
 }
 
-static void Copy16x8(const uint8_t* src, uint8_t* dst) {
+static void Copy16x8_C(const uint8_t* src, uint8_t* dst) {
   Copy(src, dst, 16, 8);
 }
 
@@ -734,26 +750,32 @@ WEBP_TSAN_IGNORE_FUNCTION void VP8EncDspInit(void) {
   InitTables();
 
   // default C implementations
-  VP8CollectHistogram = CollectHistogram;
-  VP8ITransform = ITransform;
-  VP8FTransform = FTransform;
-  VP8FTransform2 = FTransform2;
-  VP8FTransformWHT = FTransformWHT;
-  VP8EncPredLuma4 = Intra4Preds;
-  VP8EncPredLuma16 = Intra16Preds;
-  VP8EncPredChroma8 = IntraChromaPreds;
-  VP8SSE16x16 = SSE16x16;
-  VP8SSE8x8 = SSE8x8;
-  VP8SSE16x8 = SSE16x8;
-  VP8SSE4x4 = SSE4x4;
-  VP8TDisto4x4 = Disto4x4;
-  VP8TDisto16x16 = Disto16x16;
-  VP8Mean16x4 = Mean16x4;
-  VP8EncQuantizeBlock = QuantizeBlock;
-  VP8EncQuantize2Blocks = Quantize2Blocks;
-  VP8EncQuantizeBlockWHT = QuantizeBlock;
-  VP8Copy4x4 = Copy4x4;
-  VP8Copy16x8 = Copy16x8;
+#if !WEBP_NEON_OMIT_C_CODE
+  VP8ITransform = ITransform_C;
+  VP8FTransform = FTransform_C;
+  VP8FTransformWHT = FTransformWHT_C;
+  VP8TDisto4x4 = Disto4x4_C;
+  VP8TDisto16x16 = Disto16x16_C;
+  VP8CollectHistogram = CollectHistogram_C;
+  VP8SSE16x16 = SSE16x16_C;
+  VP8SSE16x8 = SSE16x8_C;
+  VP8SSE8x8 = SSE8x8_C;
+  VP8SSE4x4 = SSE4x4_C;
+#endif
+
+#if !WEBP_NEON_OMIT_C_CODE || WEBP_NEON_WORK_AROUND_GCC
+  VP8EncQuantizeBlock = QuantizeBlock_C;
+  VP8EncQuantize2Blocks = Quantize2Blocks_C;
+#endif
+
+  VP8FTransform2 = FTransform2_C;
+  VP8EncPredLuma4 = Intra4Preds_C;
+  VP8EncPredLuma16 = Intra16Preds_C;
+  VP8EncPredChroma8 = IntraChromaPreds_C;
+  VP8Mean16x4 = Mean16x4_C;
+  VP8EncQuantizeBlockWHT = QuantizeBlock_C;
+  VP8Copy4x4 = Copy4x4_C;
+  VP8Copy16x8 = Copy16x8_C;
 
   // If defined, use CPUInfo() to overwrite some pointers with faster versions.
   if (VP8GetCPUInfo != NULL) {
@@ -772,11 +794,6 @@ WEBP_TSAN_IGNORE_FUNCTION void VP8EncDspInit(void) {
       VP8EncDspInitAVX2();
     }
 #endif
-#if defined(WEBP_USE_NEON)
-    if (VP8GetCPUInfo(kNEON)) {
-      VP8EncDspInitNEON();
-    }
-#endif
 #if defined(WEBP_USE_MIPS32)
     if (VP8GetCPUInfo(kMIPS32)) {
       VP8EncDspInitMIPS32();
@@ -793,5 +810,34 @@ WEBP_TSAN_IGNORE_FUNCTION void VP8EncDspInit(void) {
     }
 #endif
   }
+
+#if defined(WEBP_USE_NEON)
+  if (WEBP_NEON_OMIT_C_CODE ||
+      (VP8GetCPUInfo != NULL && VP8GetCPUInfo(kNEON))) {
+    VP8EncDspInitNEON();
+  }
+#endif
+
+  assert(VP8ITransform != NULL);
+  assert(VP8FTransform != NULL);
+  assert(VP8FTransformWHT != NULL);
+  assert(VP8TDisto4x4 != NULL);
+  assert(VP8TDisto16x16 != NULL);
+  assert(VP8CollectHistogram != NULL);
+  assert(VP8SSE16x16 != NULL);
+  assert(VP8SSE16x8 != NULL);
+  assert(VP8SSE8x8 != NULL);
+  assert(VP8SSE4x4 != NULL);
+  assert(VP8EncQuantizeBlock != NULL);
+  assert(VP8EncQuantize2Blocks != NULL);
+  assert(VP8FTransform2 != NULL);
+  assert(VP8EncPredLuma4 != NULL);
+  assert(VP8EncPredLuma16 != NULL);
+  assert(VP8EncPredChroma8 != NULL);
+  assert(VP8Mean16x4 != NULL);
+  assert(VP8EncQuantizeBlockWHT != NULL);
+  assert(VP8Copy4x4 != NULL);
+  assert(VP8Copy16x8 != NULL);
+
   enc_last_cpuinfo_used = VP8GetCPUInfo;
 }

src/dsp/enc_avx2.c

@@ -9,7 +9,7 @@
 //
 // AVX2 version of speed-critical encoding functions.
 
-#include "./dsp.h"
+#include "src/dsp/dsp.h"
 
 #if defined(WEBP_USE_AVX2)
 

src/dsp/enc_mips32.c

@@ -13,13 +13,13 @@
 //            Jovan Zelincevic (jovan.zelincevic@imgtec.com)
 //            Slobodan Prijic  (slobodan.prijic@imgtec.com)
 
-#include "./dsp.h"
+#include "src/dsp/dsp.h"
 
 #if defined(WEBP_USE_MIPS32)
 
-#include "./mips_macro.h"
-#include "../enc/vp8i_enc.h"
-#include "../enc/cost_enc.h"
+#include "src/dsp/mips_macro.h"
+#include "src/enc/vp8i_enc.h"
+#include "src/enc/cost_enc.h"
 
 static const int kC1 = 20091 + (1 << 16);
 static const int kC2 = 35468;
@@ -113,8 +113,9 @@ static const int kC2 = 35468;
   "sb      %[" #TEMP12 "],   3+" XSTR(BPS) "*" #A "(%[temp16]) \n\t"
 
 // Does one or two inverse transforms.
-static WEBP_INLINE void ITransformOne(const uint8_t* ref, const int16_t* in,
-                                      uint8_t* dst) {
+static WEBP_INLINE void ITransformOne_MIPS32(const uint8_t* ref,
+                                             const int16_t* in,
+                                             uint8_t* dst) {
   int temp0, temp1, temp2, temp3, temp4, temp5, temp6;
   int temp7, temp8, temp9, temp10, temp11, temp12, temp13;
   int temp14, temp15, temp16, temp17, temp18, temp19, temp20;
@@ -144,11 +145,11 @@ static WEBP_INLINE void ITransformOne(const uint8_t* ref, const int16_t* in,
   );
 }
 
-static void ITransform(const uint8_t* ref, const int16_t* in,
-                       uint8_t* dst, int do_two) {
-  ITransformOne(ref, in, dst);
+static void ITransform_MIPS32(const uint8_t* ref, const int16_t* in,
+                              uint8_t* dst, int do_two) {
+  ITransformOne_MIPS32(ref, in, dst);
   if (do_two) {
-    ITransformOne(ref + 4, in + 16, dst + 4);
+    ITransformOne_MIPS32(ref + 4, in + 16, dst + 4);
   }
 }
 
@@ -187,8 +188,8 @@ static void ITransform(const uint8_t* ref, const int16_t* in,
   "sh           %[temp5],       " #J "(%[ppin])                     \n\t"   \
   "sh           %[level],       " #N "(%[pout])                     \n\t"
 
-static int QuantizeBlock(int16_t in[16], int16_t out[16],
-                         const VP8Matrix* const mtx) {
+static int QuantizeBlock_MIPS32(int16_t in[16], int16_t out[16],
+                                const VP8Matrix* const mtx) {
   int temp0, temp1, temp2, temp3, temp4, temp5;
   int sign, coeff, level, i;
   int max_level = MAX_LEVEL;
@@ -238,11 +239,11 @@ static int QuantizeBlock(int16_t in[16], int16_t out[16],
   return 0;
 }
 
-static int Quantize2Blocks(int16_t in[32], int16_t out[32],
-                           const VP8Matrix* const mtx) {
+static int Quantize2Blocks_MIPS32(int16_t in[32], int16_t out[32],
+                                  const VP8Matrix* const mtx) {
   int nz;
-  nz  = QuantizeBlock(in + 0 * 16, out + 0 * 16, mtx) << 0;
-  nz |= QuantizeBlock(in + 1 * 16, out + 1 * 16, mtx) << 1;
+  nz  = QuantizeBlock_MIPS32(in + 0 * 16, out + 0 * 16, mtx) << 0;
+  nz |= QuantizeBlock_MIPS32(in + 1 * 16, out + 1 * 16, mtx) << 1;
   return nz;
 }
 
@@ -361,8 +362,8 @@ static int Quantize2Blocks(int16_t in[32], int16_t out[32],
   "msub   %[temp6],  %[temp0]                \n\t"                \
   "msub   %[temp7],  %[temp1]                \n\t"
 
-static int Disto4x4(const uint8_t* const a, const uint8_t* const b,
-                    const uint16_t* const w) {
+static int Disto4x4_MIPS32(const uint8_t* const a, const uint8_t* const b,
+                           const uint16_t* const w) {
   int tmp[32];
   int temp0, temp1, temp2, temp3, temp4, temp5, temp6, temp7, temp8;
 
@@ -396,13 +397,13 @@ static int Disto4x4(const uint8_t* const a, const uint8_t* const b,
 #undef VERTICAL_PASS
 #undef HORIZONTAL_PASS
 
-static int Disto16x16(const uint8_t* const a, const uint8_t* const b,
-                      const uint16_t* const w) {
+static int Disto16x16_MIPS32(const uint8_t* const a, const uint8_t* const b,
+                             const uint16_t* const w) {
   int D = 0;
   int x, y;
   for (y = 0; y < 16 * BPS; y += 4 * BPS) {
     for (x = 0; x < 16; x += 4) {
-      D += Disto4x4(a + x + y, b + x + y, w);
+      D += Disto4x4_MIPS32(a + x + y, b + x + y, w);
     }
   }
   return D;
@@ -478,7 +479,8 @@ static int Disto16x16(const uint8_t* const a, const uint8_t* const b,
   "sh     %[" #TEMP8 "],  " #D "(%[temp20])              \n\t"    \
   "sh     %[" #TEMP12 "], " #B "(%[temp20])              \n\t"
 
-static void FTransform(const uint8_t* src, const uint8_t* ref, int16_t* out) {
+static void FTransform_MIPS32(const uint8_t* src, const uint8_t* ref,
+                              int16_t* out) {
   int temp0, temp1, temp2, temp3, temp4, temp5, temp6, temp7, temp8;
   int temp9, temp10, temp11, temp12, temp13, temp14, temp15, temp16;
   int temp17, temp18, temp19, temp20;
@@ -539,7 +541,7 @@ static void FTransform(const uint8_t* src, const uint8_t* ref, int16_t* out) {
   GET_SSE_INNER(C, C + 1, C + 2, C + 3)   \
   GET_SSE_INNER(D, D + 1, D + 2, D + 3)
 
-static int SSE16x16(const uint8_t* a, const uint8_t* b) {
+static int SSE16x16_MIPS32(const uint8_t* a, const uint8_t* b) {
   int count;
   int temp0, temp1, temp2, temp3, temp4, temp5, temp6, temp7;
 
@@ -573,7 +575,7 @@ static int SSE16x16(const uint8_t* a, const uint8_t* b) {
   return count;
 }
 
-static int SSE16x8(const uint8_t* a, const uint8_t* b) {
+static int SSE16x8_MIPS32(const uint8_t* a, const uint8_t* b) {
   int count;
   int temp0, temp1, temp2, temp3, temp4, temp5, temp6, temp7;
 
@@ -599,7 +601,7 @@ static int SSE16x8(const uint8_t* a, const uint8_t* b) {
   return count;
 }
 
-static int SSE8x8(const uint8_t* a, const uint8_t* b) {
+static int SSE8x8_MIPS32(const uint8_t* a, const uint8_t* b) {
   int count;
   int temp0, temp1, temp2, temp3, temp4, temp5, temp6, temp7;
 
@@ -621,7 +623,7 @@ static int SSE8x8(const uint8_t* a, const uint8_t* b) {
   return count;
 }
 
-static int SSE4x4(const uint8_t* a, const uint8_t* b) {
+static int SSE4x4_MIPS32(const uint8_t* a, const uint8_t* b) {
   int count;
   int temp0, temp1, temp2, temp3, temp4, temp5, temp6, temp7;
 
@@ -651,17 +653,20 @@ static int SSE4x4(const uint8_t* a, const uint8_t* b) {
 extern void VP8EncDspInitMIPS32(void);
 
 WEBP_TSAN_IGNORE_FUNCTION void VP8EncDspInitMIPS32(void) {
-  VP8ITransform = ITransform;
-  VP8FTransform = FTransform;
-  VP8EncQuantizeBlock = QuantizeBlock;
-  VP8EncQuantize2Blocks = Quantize2Blocks;
-  VP8TDisto4x4 = Disto4x4;
-  VP8TDisto16x16 = Disto16x16;
+  VP8ITransform = ITransform_MIPS32;
+  VP8FTransform = FTransform_MIPS32;
+
+  VP8EncQuantizeBlock = QuantizeBlock_MIPS32;
+  VP8EncQuantize2Blocks = Quantize2Blocks_MIPS32;
+
+  VP8TDisto4x4 = Disto4x4_MIPS32;
+  VP8TDisto16x16 = Disto16x16_MIPS32;
+
 #if !defined(WORK_AROUND_GCC)
-  VP8SSE16x16 = SSE16x16;
-  VP8SSE8x8 = SSE8x8;
-  VP8SSE16x8 = SSE16x8;
-  VP8SSE4x4 = SSE4x4;
+  VP8SSE16x16 = SSE16x16_MIPS32;
+  VP8SSE8x8 = SSE8x8_MIPS32;
+  VP8SSE16x8 = SSE16x8_MIPS32;
+  VP8SSE4x4 = SSE4x4_MIPS32;
 #endif
 }
 

src/dsp/enc_mips_dsp_r2.c

@@ -12,13 +12,13 @@
 // Author(s): Darko Laus (darko.laus@imgtec.com)
 //            Mirko Raus (mirko.raus@imgtec.com)
 
-#include "./dsp.h"
+#include "src/dsp/dsp.h"
 
 #if defined(WEBP_USE_MIPS_DSP_R2)
 
-#include "./mips_macro.h"
-#include "../enc/cost_enc.h"
-#include "../enc/vp8i_enc.h"
+#include "src/dsp/mips_macro.h"
+#include "src/enc/cost_enc.h"
+#include "src/enc/vp8i_enc.h"
 
 static const int kC1 = 20091 + (1 << 16);
 static const int kC2 = 35468;
@@ -141,7 +141,8 @@ static const int kC2 = 35468;
   "sh              %[" #TEMP8 "],   " #D "(%[temp20])               \n\t"      \
   "sh              %[" #TEMP12 "],  " #B "(%[temp20])               \n\t"
 
-static void FTransform(const uint8_t* src, const uint8_t* ref, int16_t* out) {
+static void FTransform_MIPSdspR2(const uint8_t* src, const uint8_t* ref,
+                                 int16_t* out) {
   const int c2217 = 2217;
   const int c5352 = 5352;
   int temp0, temp1, temp2, temp3, temp4, temp5, temp6, temp7, temp8;
@@ -238,16 +239,16 @@ static WEBP_INLINE void ITransformOne(const uint8_t* ref, const int16_t* in,
   );
 }
 
-static void ITransform(const uint8_t* ref, const int16_t* in, uint8_t* dst,
-                       int do_two) {
+static void ITransform_MIPSdspR2(const uint8_t* ref, const int16_t* in,
+                                 uint8_t* dst, int do_two) {
   ITransformOne(ref, in, dst);
   if (do_two) {
     ITransformOne(ref + 4, in + 16, dst + 4);
   }
 }
 
-static int Disto4x4(const uint8_t* const a, const uint8_t* const b,
-                    const uint16_t* const w) {
+static int Disto4x4_MIPSdspR2(const uint8_t* const a, const uint8_t* const b,
+                              const uint16_t* const w) {
   int temp1, temp2, temp3, temp4, temp5, temp6, temp7, temp8, temp9;
   int temp10, temp11, temp12, temp13, temp14, temp15, temp16, temp17;
 
@@ -313,13 +314,14 @@ static int Disto4x4(const uint8_t* const a, const uint8_t* const b,
   return abs(temp3 - temp17) >> 5;
 }
 
-static int Disto16x16(const uint8_t* const a, const uint8_t* const b,
-                      const uint16_t* const w) {
+static int Disto16x16_MIPSdspR2(const uint8_t* const a,
+                                const uint8_t* const b,
+                                const uint16_t* const w) {
   int D = 0;
   int x, y;
   for (y = 0; y < 16 * BPS; y += 4 * BPS) {
     for (x = 0; x < 16; x += 4) {
-      D += Disto4x4(a + x + y, b + x + y, w);
+      D += Disto4x4_MIPSdspR2(a + x + y, b + x + y, w);
     }
   }
   return D;
@@ -1011,8 +1013,8 @@ static void HU4(uint8_t* dst, const uint8_t* top) {
 //------------------------------------------------------------------------------
 // Chroma 8x8 prediction (paragraph 12.2)
 
-static void IntraChromaPreds(uint8_t* dst, const uint8_t* left,
-                             const uint8_t* top) {
+static void IntraChromaPreds_MIPSdspR2(uint8_t* dst, const uint8_t* left,
+                                       const uint8_t* top) {
   // U block
   DCMode8(C8DC8 + dst, left, top);
   VerticalPred8(C8VE8 + dst, top);
@@ -1031,8 +1033,8 @@ static void IntraChromaPreds(uint8_t* dst, const uint8_t* left,
 //------------------------------------------------------------------------------
 // luma 16x16 prediction (paragraph 12.3)
 
-static void Intra16Preds(uint8_t* dst,
-                         const uint8_t* left, const uint8_t* top) {
+static void Intra16Preds_MIPSdspR2(uint8_t* dst,
+                                   const uint8_t* left, const uint8_t* top) {
   DCMode16(I16DC16 + dst, left, top);
   VerticalPred16(I16VE16 + dst, top);
   HorizontalPred16(I16HE16 + dst, left);
@@ -1041,7 +1043,7 @@ static void Intra16Preds(uint8_t* dst,
 
 // Left samples are top[-5 .. -2], top_left is top[-1], top are
 // located at top[0..3], and top right is top[4..7]
-static void Intra4Preds(uint8_t* dst, const uint8_t* top) {
+static void Intra4Preds_MIPSdspR2(uint8_t* dst, const uint8_t* top) {
   DC4(I4DC4 + dst, top);
   TM4(I4TM4 + dst, top);
   VE4(I4VE4 + dst, top);
@@ -1077,7 +1079,7 @@ static void Intra4Preds(uint8_t* dst, const uint8_t* top) {
   GET_SSE_INNER(C)                        \
   GET_SSE_INNER(D)
 
-static int SSE16x16(const uint8_t* a, const uint8_t* b) {
+static int SSE16x16_MIPSdspR2(const uint8_t* a, const uint8_t* b) {
   int count;
   int temp0, temp1, temp2, temp3;
   __asm__ volatile (
@@ -1107,7 +1109,7 @@ static int SSE16x16(const uint8_t* a, const uint8_t* b) {
   return count;
 }
 
-static int SSE16x8(const uint8_t* a, const uint8_t* b) {
+static int SSE16x8_MIPSdspR2(const uint8_t* a, const uint8_t* b) {
   int count;
   int temp0, temp1, temp2, temp3;
   __asm__ volatile (
@@ -1129,7 +1131,7 @@ static int SSE16x8(const uint8_t* a, const uint8_t* b) {
   return count;
 }
 
-static int SSE8x8(const uint8_t* a, const uint8_t* b) {
+static int SSE8x8_MIPSdspR2(const uint8_t* a, const uint8_t* b) {
   int count;
   int temp0, temp1, temp2, temp3;
   __asm__ volatile (
@@ -1147,7 +1149,7 @@ static int SSE8x8(const uint8_t* a, const uint8_t* b) {
   return count;
 }
 
-static int SSE4x4(const uint8_t* a, const uint8_t* b) {
+static int SSE4x4_MIPSdspR2(const uint8_t* a, const uint8_t* b) {
   int count;
   int temp0, temp1, temp2, temp3;
   __asm__ volatile (
@@ -1270,8 +1272,8 @@ static int SSE4x4(const uint8_t* a, const uint8_t* b) {
   "usw         $0,           " #J "(%[ppin])                 \n\t"        \
 "3:                                                          \n\t"
 
-static int QuantizeBlock(int16_t in[16], int16_t out[16],
-                         const VP8Matrix* const mtx) {
+static int QuantizeBlock_MIPSdspR2(int16_t in[16], int16_t out[16],
+                                   const VP8Matrix* const mtx) {
   int temp0, temp1, temp2, temp3, temp4, temp5,temp6;
   int sign, coeff, level;
   int max_level = MAX_LEVEL;
@@ -1311,11 +1313,11 @@ static int QuantizeBlock(int16_t in[16], int16_t out[16],
   return (ret != 0);
 }
 
-static int Quantize2Blocks(int16_t in[32], int16_t out[32],
-                           const VP8Matrix* const mtx) {
+static int Quantize2Blocks_MIPSdspR2(int16_t in[32], int16_t out[32],
+                                     const VP8Matrix* const mtx) {
   int nz;
-  nz  = QuantizeBlock(in + 0 * 16, out + 0 * 16, mtx) << 0;
-  nz |= QuantizeBlock(in + 1 * 16, out + 1 * 16, mtx) << 1;
+  nz  = QuantizeBlock_MIPSdspR2(in + 0 * 16, out + 0 * 16, mtx) << 0;
+  nz |= QuantizeBlock_MIPSdspR2(in + 1 * 16, out + 1 * 16, mtx) << 1;
   return nz;
 }
 
@@ -1358,7 +1360,7 @@ static int Quantize2Blocks(int16_t in[32], int16_t out[32],
   "usw             %[" #TEMP4 "],  " #C "(%[out])                 \n\t"        \
   "usw             %[" #TEMP6 "],  " #D "(%[out])                 \n\t"
 
-static void FTransformWHT(const int16_t* in, int16_t* out) {
+static void FTransformWHT_MIPSdspR2(const int16_t* in, int16_t* out) {
   int temp0, temp1, temp2, temp3, temp4;
   int temp5, temp6, temp7, temp8, temp9;
 
@@ -1450,9 +1452,9 @@ static void FTransformWHT(const int16_t* in, int16_t* out) {
   "addiu      %[temp8],  %[temp8],    1                \n\t"                   \
   "sw         %[temp8],  0(%[temp3])                   \n\t"
 
-static void CollectHistogram(const uint8_t* ref, const uint8_t* pred,
-                             int start_block, int end_block,
-                             VP8Histogram* const histo) {
+static void CollectHistogram_MIPSdspR2(const uint8_t* ref, const uint8_t* pred,
+                                       int start_block, int end_block,
+                                       VP8Histogram* const histo) {
   int j;
   int distribution[MAX_COEFF_THRESH + 1] = { 0 };
   const int max_coeff = (MAX_COEFF_THRESH << 16) + MAX_COEFF_THRESH;
@@ -1484,23 +1486,28 @@ static void CollectHistogram(const uint8_t* ref, const uint8_t* pred,
 extern void VP8EncDspInitMIPSdspR2(void);
 
 WEBP_TSAN_IGNORE_FUNCTION void VP8EncDspInitMIPSdspR2(void) {
-  VP8FTransform = FTransform;
-  VP8ITransform = ITransform;
-  VP8TDisto4x4 = Disto4x4;
-  VP8TDisto16x16 = Disto16x16;
-  VP8EncPredLuma16 = Intra16Preds;
-  VP8EncPredChroma8 = IntraChromaPreds;
-  VP8EncPredLuma4 = Intra4Preds;
+  VP8FTransform = FTransform_MIPSdspR2;
+  VP8FTransformWHT = FTransformWHT_MIPSdspR2;
+  VP8ITransform = ITransform_MIPSdspR2;
+
+  VP8TDisto4x4 = Disto4x4_MIPSdspR2;
+  VP8TDisto16x16 = Disto16x16_MIPSdspR2;
+
+  VP8EncPredLuma16 = Intra16Preds_MIPSdspR2;
+  VP8EncPredChroma8 = IntraChromaPreds_MIPSdspR2;
+  VP8EncPredLuma4 = Intra4Preds_MIPSdspR2;
+
 #if !defined(WORK_AROUND_GCC)
-  VP8SSE16x16 = SSE16x16;
-  VP8SSE8x8 = SSE8x8;
-  VP8SSE16x8 = SSE16x8;
-  VP8SSE4x4 = SSE4x4;
+  VP8SSE16x16 = SSE16x16_MIPSdspR2;
+  VP8SSE8x8 = SSE8x8_MIPSdspR2;
+  VP8SSE16x8 = SSE16x8_MIPSdspR2;
+  VP8SSE4x4 = SSE4x4_MIPSdspR2;
 #endif
-  VP8EncQuantizeBlock = QuantizeBlock;
-  VP8EncQuantize2Blocks = Quantize2Blocks;
-  VP8FTransformWHT = FTransformWHT;
-  VP8CollectHistogram = CollectHistogram;
+
+  VP8EncQuantizeBlock = QuantizeBlock_MIPSdspR2;
+  VP8EncQuantize2Blocks = Quantize2Blocks_MIPSdspR2;
+
+  VP8CollectHistogram = CollectHistogram_MIPSdspR2;
 }
 
 #else  // !WEBP_USE_MIPS_DSP_R2