1. move the check of search method of USE_TX_8X8 up one level to
avoid operations of build_tree_distributions()
2. count tx used and avoid computaton for coef udpate when one size
is not used at all.
Change-Id: Ia3e54a2588aa531c41377a1bfaa64385d04a592c
1. reduce the size of temporaray arrays on stack
2. avoid build_tree_distribution for tx size that is not used at all.
Change-Id: I0f8d7124e16a3789d3c15ad24cf02c1c12789e2c
This patch was to fix issue 924:
https://code.google.com/p/webm/issues/detail?id=924
The SECTION_RODATA macro was modified to support macho32 format.
The sub-pixel functions were modified to pass in 2 more parameters
to handle the global offsets for PIC build.
Change-Id: I3bfcd336bcae945edf300bca4ab40376a2628cd4
On Nexus 7 speed -6 saw ~18% increase in perf.
Tested on Nexus 7, built with ndk r10d, gcc 4.9.
BUG=https://code.google.com/p/webm/issues/detail?id=908
Change-Id: I70ccdea0326750552ed946fb004507d6efe02d5c
On Nexus 7 speed -6 saw ~15% increase in perf.
Tested on Nexus 7, built with ndk r10d, gcc 4.9.
BUG=https://code.google.com/p/webm/issues/detail?id=908
Change-Id: I4b2006b644c488f42bf06d8a22ef0e6120a96bf9
On Nexus 7 speed -6 saw ~30% increase in perf.
Tested on Nexus 7, built with ndk r10d, gcc 4.9.
BUG=https://code.google.com/p/webm/issues/detail?id=908
Change-Id: Id12af7d1883243c23e6692e898aea82299633d58
Floating point is used in vp9_convert_qindex_to_q(), so sometime unit
test ActiveMapTest would cause run time error without properly call
to clear_system_state to reset register status.
Change-Id: I181e9395148c44a6ca8b97d6e109bd4a152143c6
Add distortion threshold condition to refresh state of a coding block,
and allow for qp adjustment also for some intra modes and non-zero motion modes.
Also some code cleanup (remove unused variables/code).
Change-Id: I735fa2b28bc64f60e0323976b82510577b074203
Currently disabled by default: enabled using
#define GROUP_ADAPTIVE_MAXQ
In this patch the active max Q is adjusted for each GF
group based on the vbr bit allocation and raw first pass
group error.
This will tend to give a lower q for easy sections
and a higher value for very hard sections. As such it is
expected to improve quality in some of the easier
sections where quality issues have been reported.
This change tends to hurt overall psnr but help
average psnr. SSIM also shows a small gain.
Average results for derf, yt, std-hd and yt-hd test sets were
as follows (%change for average psnr, overal psnr and ssim):-
derf +0.291, - 0.252, -0.021
yt +6.466, -1.436, +0.552
std-hd +0.490, +0.014, +0.380
yt-hd +5.565, - 1.573, +0.099
Change-Id: Icc015499cebbf2a45054a05e8e31f3dfb43f944a
On Nexus 7 speed -5 got ~2%, -6 got ~15%, -7 and -8 got ~30%
increase in perf.
Tested on Nexus 7, built with ndk r10d, gcc 4.9.
Change-Id: I83246d63b96674d170098a572fa4fe28a05aaf51
In frame parallel decode, libvpx decoder decodes several frames on all
cpus in parallel fashion. If not being flushed, it will only return frame
when all the cpus are busy. If getting flushed, it will return all the
frames in the decoder. Compare with current serial decode mode in which
libvpx decoder is idle between decode calls, libvpx decoder is busy
between decode calls. VP9 frame parallel decode is >30% faster than serial
decode with tile parallel threading which will makes devices play 1080P
VP9 videos more easily.
* frame-parallel:
Add error handling for frame parallel decode and unit test for that.
Fix a bug in frame parallel decode and add a unit test for that.
Add two test vectors to test frame parallel decode.
Add key frame seeking to webmdec and webm_video_source.
Implement frame parallel decode for VP9.
Increase the thread test range to cover 5, 6, 7, 8 threads.
Fix a bug in adding frame parallel unit test.
Add VP9 frame-parallel unit test.
Manually pick "Make the api behavior conform to api spec." from master branch.
Move vp9_dec_build_inter_predictors_* to decoder folder.
Add segmentation map array for current and last frame segmentation.
Include the right header for VP9 worker thread.
Move vp9_thread.* to common.
ctrl_get_reference does not need user_priv.
Seperate the frame buffers from VP9 encoder/decoder structure.
Revert "Revert "Revert "Revert 3 patches from Hangyu to get Chrome to build:"""
Conflicts:
test/codec_factory.h
test/decode_test_driver.cc
test/decode_test_driver.h
test/invalid_file_test.cc
test/test-data.sha1
test/test.mk
test/test_vectors.cc
vp8/vp8_dx_iface.c
vp9/common/vp9_alloccommon.c
vp9/common/vp9_entropymode.c
vp9/common/vp9_loopfilter_thread.c
vp9/common/vp9_loopfilter_thread.h
vp9/common/vp9_mvref_common.c
vp9/common/vp9_onyxc_int.h
vp9/common/vp9_reconinter.c
vp9/decoder/vp9_decodeframe.c
vp9/decoder/vp9_decodeframe.h
vp9/decoder/vp9_decodemv.c
vp9/decoder/vp9_decoder.c
vp9/decoder/vp9_decoder.h
vp9/encoder/vp9_encoder.c
vp9/encoder/vp9_pickmode.c
vp9/encoder/vp9_rdopt.c
vp9/vp9_cx_iface.c
vp9/vp9_dx_iface.c
Change-Id: Ib92eb35851c172d0624970e312ed515054e5ca64
For low spatial resolutions: bias partittion selection to smaller block sizes,
and base the variance computation on 4x4 down-sampling.
Also move the threshold computations into the choose_partitioning,
so they are computed once for each sb block.
On low-res clips (RTC_derf) PSNR/SSIMetrics increase by about 4-5%.
No change for resolutions above CIF.
Change-Id: I93f8ff742c8044786977bb6e31dcf8efda6dd1b0
Just before a forced key frame we often get a foreshortened
arf/gf group. In such a case, we do not want to update
rc->last_boosted_qindex, which is used to define the Q range
for the forced key frame itself.
This gives a small average metrics gain for the YT and YT-HD sets
(eg. YT SSIM +0.141%).
Change-Id: Ie06698bc4f249e87183b8f8fb27ff8f3fde216d9
The comparison of address in the condition is not necessary, since
they will constantly be non-null.
Change-Id: Id0b0075283f5af65215d5761a8160a4cb2a15c9b
1. Added row-based loopfilter in encoder;
2. Moved common multi-threaded loopfilter functions from decoder
to common;
3. Merged multi-threaded loopfilter code, and made encoder/
decoder call same function to reduce code duplication.
Encoder tests showed that 1% - 2% speedup was seen for good-quality
2-pass mode(at speed 3); 1% - 3% speedup using 2 threads and 4% - 6%
speedup using 4 threads were seen for real-time mode(at speed 7).
Change-Id: I8a4ac51c2ad9bab9fa7b864e90743931c53ec1c4
This commit fixes a bug in denoiser reference frame buffer swap,
which disables frame buffer update.
Change-Id: I39a9427180fd18f9692602064ad821f7af4714c0
On Nexus 7 speed -5, -6, -7, and -8 saw about a 1% increase
in perf for 480p. Speeds -5, -6, -7, and -8 saw about a 1.5%
increase in perf for 720p.
Tested on Nexus 7, built with ndk r10d, gcc 4.9.
Change-Id: Ibf17ebfd952a6aec941719bd8306df8ec4574bee
On some platforms, such as 32bit Windows and 32bit Mac, the allocated
memory isn't aligned automatically. The thread data is aligned to
ensure the correct access in SIMD code.
Change-Id: I1108c145fe982ddbd3d9324952758297120e4806
This commit adds encoder side control for vp9 to set color space info
in the output compressed bitstream.
It also amends the "vp9_encoder_params_get_to_decoder" test to verify
the correct color space information is passed from the encoder end to
decoder end.
Change-Id: Ibf5fba2edcb2a8dc37557f6fae5c7816efa52650
On Nexus 7 speed -5, -6, -7, and -8 saw about a 15% increase
in perf for 480p. Speeds -5, -6, -7, and -8 saw about a 10%
increase in perf for 720p.
Tested on Nexus 7, built with ndk r10d, gcc 4.9.
Change-Id: I2fa5315845e3021c9a6e2ea47e52e68b398d8334
Don't put small empty frame in front of a key frame. We will
put key frame flag in webm container if there's a visible key
frame. But there will be decoding error when we seek to here
if we put the small empty frame, which will be inter frame,
in front of it.
Change-Id: Id50c2c1fd31da0405ff6faa7375cc2f49c55402d
Add optimized Neon functions of:
vp9_variance32x64
vp9_variance64x32
vp9_variance64x64
On Nexus 7 speed -5 and -6 saw about a 4% increase in perf.
Speeds -7 and -8 saw about a 6% increase in perf.
Tested on Nexus 7, built with ndk r10d, gcc 4.9.
Change-Id: I5a81f13c9897eb927fa39662530f5524a0f768fa
Replaced "color space" with "color format" in comments where color
sampling format is concerned, so to differentiate from the concept
defined in COLOR_SPACE.
Change-Id: I8c935034c166b24307a99352dab1686531276bb8
This commit refactors the motion compensated reference block fetch
process in denoiser. It skips the stage that generates motion
compensated reference block if denoiser decides to use copy block
mode. For high motion clips, this could speed up the denoising
process by about 10%.
Change-Id: I8ef4fa5fe766a8c4529119b9ec01faefb3d4ef53
Use frame buffer pointer swap instead of memcpy when possible.
These two CLs make the denoiser when running on vidyo1 720p at
speed -6 over 10% faster.
Change-Id: I64fe8a2422cafca6787a50c7f4dfb961191c0a9d
These two parameters are used to control the denoiser cut-off
thresholds. They should be properly initialized when starting
mode search of a given block.
Change-Id: Iba8a25487026a0dbe0d350c347d7e4e4e237b637
The vp9_denoiser_free() function will internally check if the
buffer pointers are NULL. This commit makes the encoder always
call vp9_denoiser_free() after finishing encoding. It protects the
case where noise_sensitivity_level is changed during encoding
process and happen to be turned off towards the end of sequence,
which could result memory space allocated to denoiser not being
released.
Change-Id: Ie20dc2f2e6e5fb6333fbab3356bc153978a6a0f8
Use the correct frame size and stride value for chroma components
when setting the initial values. These control parameters are
assigned when the denoiser buffer was allocated and initialized.
Change-Id: Ia6318194c7738aff540bcbd34f77f0dac46221a1
Allocate the frame buffer allocation for denoiser once during the
encoder initialization. This avoids allocating frame buffer
multiple times and overwriting the buffer pointer without proper
releasing.
Change-Id: I9b3baa6283449d86fd164534d344c036bb035700
When testing frame sse to choose a loop filter value and
when checking ambient error in kf Q selection, use 64 bit
values for accumulating the sse, to avoid risk of overflow
for large image formats.
Change-Id: I03765d16c843d0ade61a45b0cd46312472697e57
This makes the inter_mode counts update consistent with other symbols.
Also, forward updates should work corerctly now.
Change-Id: Id98be26fd08875162e644bb8f1de6f0918f85396
This commit fixes the buffer alignment control in denoised video
output function. The encoder is now able to properly store the
denoised input video into provided file when enabled.
Change-Id: I258e272c8d4a9b52592e16d6d09976c6f5c21728
Use mbmi->segment_id directly in vp9_pick_inter_mode. The value is
set outside this function, hence no need to assign it again.
Change-Id: I3d63cdd2e4fadf62ccdefada638b00d979eb3741
Check if block size is below 8x8 for rectangular block coding. It
is added to support 4x8 and 8x4 block coding for RTC mode.
Change-Id: I760b328f45b98ae48adc45ed5a39fb643cd8aebd
This commit simplifies the reference motion vector part for sub8x8
block coding in RTC mode and reduces the required local variables.
Change-Id: I470d1482092563b68af22404dc1f497e7457b0a8
This commit enables sub8x8 inter block coding for RTC mode. The
use of sub8x8 blocks can be turned on by allowing
choose_partitioning function to select 4x4/4x8/8x4 block sizes.
Change-Id: Ifbf1fb3888fe4c094fc85158ac3aa89867d8494a
Properly set the corresponding scaling factor of the reference
frame in the non-RD mode decision process. This allows the mode
search process to account for the scaled reference frame when
selecting coding mode.
Change-Id: I9d41bff6931c98e5a82b413e37ac5e6e14b93b23
Local variables used at the setjmp() site need to be marked volatile.
Relevant excerpt from the 'man longjmp':
===============
The values of automatic variables are unspecified after a call to
longjmp() if they meet all the following criteria:
· they are local to the function that made the corresponding setjmp(3) call;
· their values are changed between the calls to setjmp(3) and longjmp(); and
· they are not declared as volatile.
===============
Change-Id: I093e6eeeedbf5f781d202248ca701ba2c29d3064
This commit adds a guard condition to the intra mode test skip
control in RTC coding mode. If all inter modes are skipped, force
the encoder to check intra mode. It avoids situations where the
encoder processes without properly assigning required mode
information.
Change-Id: Ibb349fee997d6584ce901d08b06e8df3ca9c01b1
Initial patch to remove get_zbin_mode_boost() and
cpi->zbin_mode_boost.
For now sets a dummy value of 0 for zbin extra pending
a further clean up patch.
Change-Id: I64a1e1eca2d39baa8ffb0871b515a0be05c9a6af
The alternate reference frame is disabled in non-RD mode. No need
to keep the related entries in the THR_MODES array.
Change-Id: I53386f4bb1c6284f582801f27246c5edf55bc24b
In RTC coding mode, the alternate reference frame modes and compound
inter prediction modes are disabled. This commit reworks the
related mode search threshold update process to skip interacting
with these coding modes. It provides about 1.5% speed-up for speed
-6 on average.
vidyo1
16551 b/f, 40.451 dB, 6261 ms -> 16550 b/f, 40.459 dB, 6190 ms
nik720p
33316 b/f, 38.795 dB, 6335 ms -> 33310 b/f, 38.798 dB, 6237 ms
mmmoving
33265 b/f, 41.055 dB, 7176 ms -> 33267 b/f, 41.064 dB, 7084 ms
dark720
33329 b/f, 39.729 dB, 11235 ms -> 33331 b/f, 39.733 dB, 10731 ms
Change-Id: If2a4090a371cd28f579be219c013b972d7d9b97f
This commit removes undefined value options of cpu-used for VP9 and
changed vpxenc prompt to reflect the usable range of [-8,8]
Change-Id: Ib80fef3dbb6ec9aabac45ed13e8ab6fbaf94f55e
Use a temporary variable to store the transform size associated
with the best intra mode and restore the mode_info if the overall
best mode is intra mode.
Change-Id: I2606e0061ad32f91b095462902b1eb734b128eea
This commit explicitly set the second reference frame type to be
NONE in key frame coding mode. This fixes a subtle dependency of
reference motion vector used by next inter frame on mode_info
reset before key frame coding.
Change-Id: I5ff0359753fdc9992b0bfe889490f7a32d7d5f6a
Where there is very subtle motion, especially when combined
with low spatial complexity, the codec sometimes fails to quickly
pick up the ambient motion field.
Once it has been established though the field propagates well using
Nearest and Near MV.
This patch looks specifically at the case where the Nearest and Near
have not been established as non zero vectors and in this case
discounts the cost of searching for a new vector in the rd code.
This will almost certainly have some implications in terms of encode
speed but it should be possible to mitigate the impact in a subsequent
using first pass stats and the local spatial complexity.
Average results for test sets approximately neutral.
Change-Id: I44a29e20f11f7ab10f8c93ffbdc50183d9801524
Change 72141 introduced a new use of vp9_avg_4x4.
This call needs to switch to using vp9_highbd_avg_4x4
when performing high bitdepth encodes.
Change-Id: I6a8ba4b62f8a75d0a917b365a55245e2f0438ea1
When multiple intra modes are tested, the previous mode info
update process may overwrite the selected best intra mode and make
the final selection use an inter mode. This commit fixes this
issue by moving the mode_info reset outside the intra mode search
loop.
Change-Id: I15ed4288a6b3cb0832104a5e6d5d9a25cd1a5b2b
If vp9_pick_inter_mode works properly, it should at least check
one coding mode and hence get best_tx_size assigned a valid value.
There is no need to initialize best_tx_size with a legitimate
value before starting the mode search.
Change-Id: Ic0496cd89672ea9c2c512a9bd1da952190af9cba
Make the variable reduction_fac log2 based and explicitly use
right shift when computing intra_cost_penalty.
Change-Id: I208f1fb879a02debb3b3fc64f9fd06260dcf1c86
Fails to compile. Bad calls to vp9_alloc_frame_buffer
and vp9_realloc_frame_buffer in postproc.c
This reverts commit 399823b6f5.
Change-Id: I29f0e173f8e185d3a303cfdb17813e1eccb51e3a
Add support for setting byte alignment on the Y, U, and V plane of the
reference buffers. The byte alignment must be a power of 2, from 32 to
1024. A value of 0 sets legacy alignment.
Change-Id: I7c1399622f7aa68e123646369216b32047dda73d
This commit fixes a bug in the PICK_MODE_CONTEXT index for
horizontal partition case. The compression performance change
is less than 0.01% level, since most blocks are selected to
use square block size in RTC coding mode.
Change-Id: I67effc18ae8795fccdd82a55f4efc609fa5cb3e1
For key frame under variance source partition: 4x4 prediction blocks
may be selected when variance of 8x8 block is very high (threshold is set fairly high for now).
Testing on some RTC clips shows this helps to reduce some ringing artifacts on key frame.
Encoded key frame size increases about ~10%. Key frame PSNR increases about ~0.1-0.2dB.
Change-Id: I56e203fac32ea6ef69897fb3ea269c59cb50d174
This commit explicitly uses the bit shift operation instead of
division for computing block variance.
Change-Id: Id19c0ff27dd1d1ae4aceee6657e1aad0d406bd74
This commit refactors the choose_partitioning function. It removes
redundant memset calls and makes the encoder to calculate
variance value per block only when it is needed. It reduces the
average runtime cost of choose_partitioning by 60%. Overall it
reduces speed -6 runtime by 2-5%.
Change-Id: I951922c50d901d0fff77a3bafc45992179bacef9
Replace error_resilient flag with use_prev_frame_mvs in
vp9_pick_inter_mode reference motion vector search selection.
This effectively turns off the simplified ref mv search in the
settings of frame resizing, even if error-resilient mode is off.
Change-Id: I7fed814ee7bc0cb419a03b846e0fc2de46ba7686
Update the frame motion vector only if previous frame motion vector
is needed for next frame reference motion vector.
Change-Id: Ica50f9d7b46ad4f815bba0d9e30f5546df29546f
This commit enables the use of sub8x8 blocks in RTC key frame
encoding. It requires the block size to be preset and will decide
the coding mode and encode the bit-stream.
Change-Id: I35aaf8ee2d4d6085432410c7963f339f85a2c19b
Rename set_modeinfo_offsets as set_mode_info_offsets, to be more
consistent with naming convention.
Change-Id: I68ca1f36c4a78127d9439a50c1506a2afd07927d
The later encoding process will take the top-left block's
mode_info for pre-determined block size.
Change-Id: I76a90f9ce7f3b2dbc2975b52442114e461c465b5
The restructure moves the decision into the rd pick
modes loop and makes a decision based at the 16x16
block level instead of only the 64x64 level.
This gives finer granularity and better visual results
on the clips I have tested. Metrics results are worse
than the old AQ2 especially for PSNR and this mode
now falls between AQ0 and AQ1 in terms of visual
impact and metrics results.
Further tuning of this to follow.
It should be noted that if there are multiple iterations
of the recode loop the segment for a MB could change
in each loop if the previous loop causes a change in the
complexity / variance bin of the block. Also where a block
gets a delta Q this will alter the rd multiplier for this block
in subsequent recode iterations and frames where the
segmentation is applied.
Change-Id: I20256c125daa14734c16f7cc9aefab656ab808f7
the flag in the header wasn't being set based on the encoder
configuration in non-intra only mode
broken since:
fbc2fbf Adding oxcf temp variable.
Change-Id: Ib4cff9901889824bc4e68d7f0f6deb1e41df2f53
The initial reset of this_rdc in vp9_pick_inter_mode is not needed,
since it will be re-assign when used.
Change-Id: Ic0e12d741cbab292fc214c1eabb48b129af7839b
Compare the current best mode rate-distortion cost with the skip
threshold to decide if performing motion search.
Change-Id: Ia071824f8dd3b7db485f424692a485a2da6a1a9f
These speed-up features for key frame coding are only turned on
in the settings of hybrid non-RD and RD mode decision. It provides
about 20% speed-up to the hybrid key frame coding at the expense
of certain compression performance loss. For vidyo1, the key frame
coding statistics are changed
9838F, 35.020 dB, 61677 us -> 9920F, 34.834 dB, 47556 us
Overall rtc set compression performance is down by -0.257%.
Change-Id: I0025447fda26bb7855e982955642b5f55d71b51f
When block size is below 16x16, the encoder swap from non-RD to
RD mode for key frame coding. This largely brough back the key
frame compression performance. For vidyo1 at 1000 kbps, the key
frame coding statistics are changed
9978F, 34.183 dB, 36807 us -> 9838F, 35.020 dB, 61677 us
As compared to the full RD case
7187F, 34.930 dB, 214470 us
The overall rtc set coding performance (single key frame setting)
is improved by 1.5%.
Change-Id: I78a4ecf025d7b24ec911e85be94e01da05e77878
Change 72193 made the encoder behave differently
when configured with and without high bitdepth.
This change means the same algorithm is used for both.
Change-Id: I707a44a94afca773a9e0c2f7ebeeea83030257c5
Currently, VP9 supports column-tile encoding, which allows a frame
to be encoded in multiple column tiles independently. The number of
column tiles are set by encoder option "--tile-columns". This
provides a way to encode a frame in parallel.
Based on previous set of patches, this patch implemented the tile-
based multi-threaded encoder. Each thread processes one or more
tiles.
Usage:
For HD clips:
--tile-columns=2 --threads=1/2/3/4
While using 4 threads, tests showed that the encoder achieved
2.3X - 2.5X speedup at good-quality speed 3, and 2X speedup at
realtime speed 5.
Change-Id: Ied987f8f2618b1283a8643ad255e88341733c9d4
Change 71789 renamed CONFIG_VP9_HIGH to CONFIG_VP9_HIGHBITDEPTH.
However, one use of CONFIG_VP9_HIGH was missed.
Change-Id: I0ebb9c71380c6d810a25708d15471abf9533e695
For key frame at speed 6: enable the non-rd mode selection in speed setting
and use the (non-rd) variance_based partition.
Adjust some logic/thresholds in variance partition selection for key frame only (no change to delta frames),
mainly to bias to selecting smaller prediction blocks, and also set max tx size of 16x16.
Loss in key frame quality (~0.6-0.7dB) compared to rd coding,
but speeds up key frame encoding by at least 6x.
Average PNSR/SSIM metrics over RTC clips go down by ~1-2% for speed 6.
Change-Id: Ie4845e0127e876337b9c105aa37e93b286193405
This commit reworks the ONE_LOOP_REDUCED coefficient probability
model update process. It allows model update for every coefficient
across the spectrum at a coarser resolution, instead of performing
precise update only for certain subset of probability models.
The overall runtime remains nearly same (<1% change) for speed -6.
The compression performance is improved by 7.5% in PSNR for speed
-5 and 4.57% for speed -6, respectively.
Change-Id: Ifb17136382ee7e39a9f34ff4a4f09a753125c8d1
Change 72056 unfolded some macro definitions,
but lost some alternative behaviour required for
high bitdepth encodes.
This causes the encoder to crash, see issue 884.
Change-Id: I8ce4d73c9fe0a3c10ccb86fba210fabc8b2f0ccc
Also removes some spurious changes in common/vp9_blockd.h which
was introduced by a rebase issue between nextgen and master branches.
Change-Id: If359f0e9a71bca9c2ba685a87a355873536bb282
(cherry picked from commit 005d80cd05)
(cherry picked from commit 08d2f54800)
(cherry picked from commit 4230c2306c)
AQ2 modified to use mb_av_energy in defining variance
thresholds used alongside complexity when defining the
segment to be used for an SB64.
Slight improvements in metrics (ssim and PSNR).
Change-Id: Idb9cb73f7d9c4f7118cd7e84ac77b0f25cacbf81
Incorporate segment delta-q into estimated bits.
This generally improves the rate control under cyclic refresh (aq=3) mode.
Change-Id: I1dc60fb230e7d08357fae18909d8ed27bf58e037
This patch greatly increase the strength of AQ1.
Visual tests show strong gains on many clips but their is a big
hit on psnr.
SSIM is more mixed with some winners and losers.
Change-Id: Idaa5d3b41d8576096bfa000b62bc531c3d8bf6a1
Each tile's tok starting address is calculated before the encoding
process. These addresses are stored so that the same calculation
won't be done again in packing bit stream.
Change-Id: I0a3be0301f002260c19a850303f2f73ebc47aa50
When the golden frame is boosted, the rate correction factor is not
correlated well with other inter frames even in CBR mode. This commit
changes to use GF specific rate_correction_factor when gf_cbr_boost
is greater than 20%.
Change-Id: I6312c1564387bcacc11f4c5e8a9cfdc781b5c3ab
This commit allows the encoder to increase the mode test kick-off
thresholds if the previous best mode renders all zero quantized
coefficients, thereby saving motion search runs when possible.
The compression performance of speed -5 and -6 is down by -0.446%
and 0.591%, respectively. The runtime of speed -6 is improved by
10% for many test clips.
vidyo1, 1000 kbps
16578 b/f, 40.316 dB, 7873 ms -> 16575 b/f, 40.262 dB, 7126 ms
nik720p, 1000 kbps
33311 b/f, 38.651 dB, 7263 ms -> 33304 b/f, 38.629 dB, 6865 ms
dark720p, 1000 kbps
33331 b/f, 39.718 dB, 13596 ms -> 33324 b/f, 39.651 dB, 12000 ms
mmoving, 1000 kbps
33263 b/f, 40.983 dB, 7566 ms -> 33259 b/f, 40.978 dB, 7531 ms
Change-Id: I7591617ff113e91125ec32c9b853e257fbc41d90
This patch modified struct VP9_COMP. Created a struct ThreadData
to include data that need to be copied for each thread. In
multiple thread case, one thread processes one tile. all threads
share one copy of VP9_COMP,
(refer to VP9_COMP *cpi in the code)
but each thread has its own copy of ThreadData,
(refer to ThreadData *td in the code).
Therefore, within the scope of encode_tiles(), both cpi and td
need to be passed as function parameters.
In single thread case, the FRAME_COUNTS pointer in ThreadData
points to "counts" in VP9_COMMON.
Change-Id: Ib37908b2d8e2c0f4f9c18f38017df5ce60e8b13e
The intra mode penalty is covered by intra_cost_penalty. This
commit removes the other intra cost threshold, provided that the
constant 50 is negligible in normal rate-distortion cost.
Change-Id: I9b8b7483c43b9a41741622e7057def1f7d51bb72
This change is made in preparation for a
subsequent patch which adds acceleration
for the highbitdepth transform functions.
The highbitdepth transform functions attempt
to use 16/32bit sse instructions where possible,
but fallback to using the C implementations if
potential overflow is detected. For this reason
the dct routines are made global so they can be
called from the acceleration functions in the
subsequent patch.
Change-Id: Ia921f191bf6936ccba4f13e8461624b120c1f665
(cherry picked from commit 454342d4e7)
This commit makes a non-RD coding mode decision process for key
frame coding. It can be optionally turned on in speed -6 and above.
Change-Id: I0847258b392877a0210b4768bef88ebc9ad009b5
This commit allows more aggressive decision to skip forward
transform and quantization for luma component in RTC coding mode.
The chroma components remains going through the normal coding
routine, since they are not included in the non-RD mode search
process.
It reduces the runtime cost by 2% - 10%. In speed -6,
vidyo1 1000 kbps
16576 b/f, 40.281 dB, 8402 ms -> 16576 b/f, 40.323 dB, 7764 ms
nik720p 1000 kbps
33337 b/f, 38.622 dB, 7473 ms -> 33299 b/f, 38.660 dB, 7314 ms
dark720p 1000 kbps
33330 b/f, 39.785 dB, 13505 ms -> 33325 b/f, 39.714 dB, 13105 ms
The compression performance of speed -6 is improved by 0.44% in
PSNR and 1.31% in SSIM.
Change-Id: Iae9e3738de6255babea734e5897f29118bebc6d7
In AQ1 a rate adjustment was applied for blocks coded with a
deltaq. This tends to skew the partition selection and cause
rate overshoot.
For example, consider a 64x64 super block where some but not all
sub blocks are in a low q segment and some are in a high q segment.
The choice of Q when considering large partition and transform sizes
is defined by the lowest sub block segment id (currently this implies the
lowest Q). If some parts of the larger partition are very hard this will
cause a high rate component.
The correct behavior here is for the rd code to discard the large partition
choice and break down to sub blocks where some have low and some
have high Q. However the rate correction factor above mask the high
cost of coding at a larger partition size.
Change-Id: Ie077edd0b1b43c094898f481df772ea280b35960
