since:
92479d9 Make update_partition_context faster
fixes:
vp9/common/vp9_blockd.h:408:22: error:
non-constant-expression cannot be narrowed from type 'int' to 'char' in
initializer list [-Wc++11-narrowing]
char pcvalue[2] = {~(0xe << boffset), ~(0xf <<boffset)};
^~~~~~~~~~~~~~~~~
Change-Id: Id5b00b9a72d00a2b314081a23879bd1fa3ce983b
This commit enables SSE2 4x4 foward hybrid transform. The runtime
goes from 249 cycles down to 74 cycles. Overall around 2% speed-up
at no compression performance change.
Change-Id: Iad4d526346e05c7be896466c05500711bb763660
Adding read_skip_coeff function. Renaming decode_mv to read_mv for
consistency with another function names. Removing redundant function
arguments. Renaming kfread_modes to read_intra_mode_info, read_mb_modes_mv
to read_inter_mode_info, vp9_decode_mb_mode_mv to vp9_read_mode_info,
vp9_decode_mode_mvs_init to vp9_prepare_read_mode_info. Inlining function
mb_mode_mv_init inside vp9_prepare_read_mode_info.
Change-Id: Ifee05d333da4cd331d4aff40ce41ccd9b70e494a
Makes cost_coeffs() a lot faster:
4x4: 236 -> 181 cycles
8x8: 888 -> 588 cycles
16x16: 3550 -> 2483 cycles
32x32: 17392 -> 12010 cycles
Total encode time of first 50 frames of bus (speed 0) @ 1500kbps goes
from 2min51.6 to 2min43.9, i.e. 4.7% overall speedup.
Change-Id: I16b8d595946393c8dc661599550b3f37f5718896
Adding CHECK_MEM_ERROR macro to vp9_common.h and removing two duplicated
ones from vp9_onyx_int.h and vp9_onyxd_int.h.
Change-Id: I916afec61b3019f18193135dac7c35ed0f89b8b6
Cycle timings for first 3 frames of bus (speed 0) at 1500kbps:
4x4: 298 -> 234 cycles
8x8: 1227 -> 878 cycles
16x16: 23426 -> 18134 cycles
32x32: 4906 -> 3664 cycles
Total encode time of first 50 frames of bus @ 1500kbps (speed 0) goes
from 3min0.7 to 2min51.6 seconds, i.e. 5.3% faster.
Change-Id: I68a0e1b530b0563b84a67342cca4b45146077e95
This commit replaces zrun_zbin_boost, a method of biasing non-zero
coefficients following runs of zero-coefficients to be rounded towards
zero, with an explicit skip-block choice in the RD loop.
The logic is basically that if individual coefficients should be rounded
towards zero (from a RD point of view), the trellis/optimize loop should
take care of it. If whole blocks should be zero (from a RD point of
view), a single RD check is much more efficient than a complete
serialization of the quantization loop.
Quality change: derf +0.5% psnr, +1.6% ssim; yt +0.6% psnr, +1.1% ssim.
SIMD for quantize will follow in a separate patch. Results for other
test sets pending.
Change-Id: Ife5fa641163ac5150ac428011e87188f1937c1f4
This commit change the partition search order to allow checking of
rectangular partition to be done after square partitions. It also
added a speed feature to skip rectangular partition check when
NONE is better than SPLIT in RD sense.
This feature roughly speed up encoder by 1.5X with loss on compression
-0.91% on cif set
-0.56% on stdhd set
Change-Id: I0d2d06993041aa9ea9073fcc39c54f73a127dfa4
Using vp9_set_pred_flag function instead of custom code, adding
decode_tokens function which is now called from decode_atom,
decode_sb_intra, and decode_sb.
Change-Id: Ie163a7106c0241099da9c5fe03069bd71f9d9ff8
- Added vp9_loop_filter_horizontal_edge_neon and
vp9_loop_filter_vertical_edge_neon.
- The functions are based off the vp8 loopfilter
functions.
- Matches x86 md5 checksum.
Change-Id: Id1c4dddb03584227e5ecd29f574a6ac27738fdd0
Encoding time of first 50 frames of bus @ 1500kbps (speed 0) goes from
3min15.0 to 3min10.9, i.e. 2.1% faster overall.
Change-Id: If592ee99be09bcd34a7c8498347f44e7305e982c
This commit enables configurable reference buffer pointer for intra
predictor. This allows later removal of spatial dependency between
blocks inside a 64x64 superblock in the rate-distortion optimization
loop.
Change-Id: I02418c2077efe19adc86e046a6b49364a980f5b1
Use vpx_memset for updating the partition contexts. Thanks to Noah
for pointing out the need of refactoring in this part.
Change-Id: I67fb78429d632298f1cd8a0be346cc76f79392a6
Also tweaks to other features and experiments with
what is on and off at different speed settings.
Change-Id: I3e1d0be0d195216bf17c2ac5df67f34ce0b306b2
The aligned array in parameter list caused win32 build to report
c2719 error. This commit fixed the issue by make the parameter
type a pointer instead of an array.
Change-Id: I4ed654ce4eba2db4995d9cdc136c68e9a6acc992
Each frame we reset all adaptive thresholds to MAX
rather than base. As modes are picked their thresholds
drop down.
Change-Id: Ia37f03a73003c2d9bfcda57edea07205e9a0e5e8
Renamed cpi->sf.first_step to cpi->sf.reduce_first_step_size
and changed its meaning such that it is a delta applied to
reduce the default first step size (>> x) in the motion search
rather than an absolute value.
The default first step size is already changed according to the image
dimensions (smaller for smaller images). cpi->sf.reduce_first_step_size
now applies a further correction from the default.
Change-Id: Ia94e08bc24c67b604831f980909af7e982fcd16d
The part where we align it by 8 or 16 is an implementation detail that
shouldn't matter to the outside world.
Change-Id: I9edd6f08b51b31c839c0ea91f767640bccb08d53
Makes first 50 frames of bus @ 1500kbps encode from 3min22.7 to 3min18.2,
i.e. 2.3% faster. In addition, use the sub_pixel_avg functions to calc
the variance of the averaging predictor. This is slightly suboptimal
because the function is subpixel-position-aware, but it will (at least
for the SSE2 version) not actually use a bilinear filter for a full-pixel
position, thus leading to approximately the same performance compared to
if we implemented an actual average-aware full-pixel variance function.
That gains another 0.3 seconds (i.e. encode time goes to 3min17.4), thus
leading to a total gain of 2.7%.
Change-Id: I3f059d2b04243921868cfed2568d4fa65d7b5acd
This commit enables 8x8 DCT and hybrid transform unit tests. It
also tunes the forward hybrid transform rounding opertions for
more precise round-trip performance.
Change-Id: If05c1ce59d75d641b9c6c91527d02d3a6ef498c3
This commit makes use of the butterfly structure to enable the sse2
version implementation of 8x8 ADST/DCT hybrid transform coding.
The runtime of hybrid transform module goes down from 1170 cycles
to 245 cycles. Overall speed-up around 1.5%.
Change-Id: Ic808ffd21ece8a9d0410d8c0243d7b6c28ac3b3f
This reduced the size of the MODE_INFO array (mip and prev_mip)
by 425,568 bytes each for 1080p resolutions.
Change-Id: Ifa513ec2d0a49e8ec0867ec90620762fb7f1261d
For cases where there's no transform set in bit 0 (the left edge of
the SB) but bit 0 of mask_4x4_int is set (the edge 4 pixels from the
left edge needs filtering), it was incorrectly being skipped before.
This situation only happens on the leftmost edge of the image, as
the edge at column 0 is intentionally skipped since there aren't
pixels to the left to read.
Change-Id: Ib2fbbcb40166e90af31b1a0e13b85b68c226cbd3
Change vp9_block_error() to return a 64bit error variable, change all
callers to expect a 64bit return value (this will prevent overflows,
which we basically don't check for at all right now). Remove duplicate
block_error() function, which fixed that through truncation. Remove
old (incompatible) mmx/sse2 block_error SIMD versions and replace with
a new one that returns a 64bit value.
Encoding time of first 50 frames of bus @ 1500kbps goes from 3min29 to
3min23, i.e. a 3% overall speedup.
Change-Id: Ib71ac5508b5ee8a80f1753cd85d72df1629abe68
Encoding of bus @ 1500kbps (first 50 frames) goes from 3min57 to
3min35, i.e. approximately a 10.5% speedup. Note that the SIMD versions
which use a bilinear filter (x_offset & 7 || y_offset & 7) aren't
perfectly interleaved, and can probably be improved further in the
future. I've marked this with a few TODOs/FIXMEs in the code.
Change-Id: I5c9e900c0f0d32e431a50fecae213b510b2549f9
Improves the rd modeling function and implements them using interpolation
from a table which is a little faster. Also uses sse as input to the
modeling function rather than var - since there is no dc prediction
used and as a result the sse works a little better.
derfraw300: +0.05%
Speedup: ~1%
Change-Id: I151353c6451e0e8fe3ae18ab9842f8f67e5151ff
This uses variance to split partition. Variance is calculated using
nearest mv, always from last ref frame.
Change-Id: Idd015b4a9aa3bc82591759eac239680c07496896
The new print out includes skips and has prefixed sections so you can
grep to find things like transforms chosen on each frame.
Change-Id: I195043424647d9514cfc3ff6720a5b20d010fa1b
Optimized the quantization function by making it a two-pass
process. The first pass does a quick checking of the transform
coefficients against the base ZBIN, and only keep the good
enough set of coefficients for quantization. A skipping
check is added. If all coefficients are within the base ZBIN, no
quantization is needed. The second pass is the actual quantization
pass, which only processes the coefficient subset determined
in first pass. This reduces the computation. Furthermore, an
alternitive method is used for large transform size, which often
has sparse nonzero quantized coefficients.
Overall, the encoder speedup is about 4%. The quantization function
itself gets 20% faster.
Change-Id: I3a9dd0da6db030260b6d9c314a9fa48ecae89f22
This commit makes use of dual fdct32x32 versions for rate-distortion
optimization loop and encoding process, respectively. The one for
rd loop requires only 16 bits precision for intermediate steps.
The original fdct32x32 that allows higher intermediate precision (18
bits) was retained for the encoding process only.
This allows speed-up for fdct32x32 in the rd loop. No performance
loss observed.
Change-Id: I3237770e39a8f87ed17ae5513c87228533397cc3
This seems to only be used in the encoder. Also remove an empty wrapper
file that contained forward declarations for this function, but didn't
actually define any actual functions.
Change-Id: Ifc561eef7ebe374a7d03698055e51e105f6d614b
vp9_default_inter_mode_probs was being accessed with a different type
than it was defined with. Ensure that its declaration is included
prior to its definition.
Change-Id: I2f963f513ab2f4e339f8a3c17e3d0f03749eba16
All elements of this table are equal to 252, so replace it with a
single constant VP9_COEF_UPDATE_PROB.
Change-Id: I1e2d1d284326ce6df9899a740c2fc344b3ec81c9
The encoding time for bus at CIF goes from 661s to 625s. This commit
also enabled unit test of sad8x4/4x8 in sad_test.cc.
Change-Id: If3d10ebb56bda584bdb69bcf056599d580b12cb1
Avoid calling decode_block, inverse transform/add in the block is
a skip block for SBs smaller than 8x8 and intra-coded SBs.
Change-Id: I1684182f4a0050c8d6bb46cba6830d9425e7127d
The encoding time for bus at CIF goes from 661s to 625s. This commit
also enabled unit test of sad8x4/4x8 in sad_test.cc.
Change-Id: If3d10ebb56bda584bdb69bcf056599d580b12cb1
Modified to work with 8x8 blocks of memory. Will revisit
later for further optimizations. For the HD clip used, the
decoder improved by almost 20%.
Change-Id: Iaa4785be293a32a42e8db07141bd699f504b8c67
Modified to work with 8x8 blocks of memory. Will revisit
later for further optimizations. For the HD clip used, the
decoder improved my 20%.
Change-Id: Ia0057f55d66d1445882351ea6c43b595a5a980e5
