No bitstream change.
Removes unused filters and the code for the case of 2 switchable filters;
also changes the 8tap-smooth filter coefficients for integer shifts to be
interpolating to be consistent with the way it is implemented currently.
Change-Id: I96c542fd8c06f4e0df507a645976f58e6de92aae
Implements ability to signal and decode frames that are
encoded using only intra coding modes. Only the decode
side has been implemented here.
Change-Id: I53ac6a8d90422cd08ba389e5236e15b45f9e93de
Change the argument of get_uv_tx_size() to be an MBMI pointer, so that the
correct column's MBMI can be passed to the function.
Change-Id: Ied6b8ec33b77cdd353119e8fd2d157811815fc98
Fixed point scaling factors are calculated once for each
reference frame by using integer division. Otherwise fixed point
scaling routines are used in all scaling calculations. This makes it
possible to calculate fixed point scaling factors on device driver
software and pass them to hardware and thus avoid division on hardware.
TODO:
- Missing check for maximum frame dimensions
(currently scaling uses 14 bits)
- Missing check for maximum scaling ratio
(upscaling 16:1, downscaling 2:1)
Problems:
- Straightforward fixed point implementation can cause error +-1
compared to integer division (i.e. in x_step_q4). Should only
be an issue for frames larger than 16k.
Change-Id: I3cf4dabd610a4dc18da3bdb31ae244ebaf5d579c
Was always using sb_type of first column in a row of 8x8 units when
determining decoded block edges as a subcondition for loop filter
skipping.
Change-Id: Ib17554633a63a90b70cdaa7bed65db035a8ad9d8
Reduces TX_SIZE contexts to 2 for each kind. The code is
cleaner and there is hardly any performance difference with
more than two contexts.
Results: almost neutral
Change-Id: I17656bd6db76224ae2856adf882504560e7dbaa4
Made changes to the frame header to write the sync
code in the frame header for a non-displayable,
intra-only frame.
Extended reset_frame_context to 2-bits.
(Submitting on behalf of Dmitri)
Change-Id: Ie836ae0df9ed572fb4f08aabe9351a555c4f3b96
Adds coding of transform size within a frame by use of context
of transform sizes selected in left and above blocks.
Also incorporates code for generating stats.
TODO: generate and incorporate new default stats
Change-Id: I6a7af099f6ad61d448521d9a51167aedaf638ed6
Refactors mbskip coding to be compatible with coding of the rest of
the symbols. Adds forward/backward adaptation and removes a lot of
the legacy code.
Results:
fast50: +1.6%
derfraw300: +0.317%
Change-Id: I395a2976d15af044d3b8ded5acfa45f6f065f980
The partition types of blocks sitting on the frame boundary are
constrained by the block size and the position of each sub-block
relative to the frame. Hence we use truncated probability models
to handle the coding of such information.
100 frames run:
yt 0.138%
Change-Id: I85d9b45665c15280069c0234ea6f778af586d87d
This can only happen if partition is partly out-of-frame, in which
case the referenced mv is either out-of-frame also (and thus has the
same value as an already-read one), or it is actually uninitialized,
in which case we don't want to use it.
Change-Id: Icf39fa4d987c7abcbebb9bbdcdd6311e8fb9d3c9
With the removal of i4X4 and SPLIT_MV modes, the two entries for the
modes are no longer used. This patch remove the coding of the deltas.
Change-Id: Iea4eb500404ebe9706159380a03b8eca542fb4c3
Changes to the coding of transform sizes, along with forward
and backward probability updates.
Results:
derf300: +0.241%
Context based coding of transform sizes will be in a separate
patch.
Change-Id: I97241d60a926f014fee2de21fa4446ca56495756
Added condition to not to skip filtering of transform block edges when
the edge is also a decoding block edge.
Change-Id: Iaccb6206c4202b78e5dca3b89379556e0f4aba0c
Wrong max data size (skip has no data) and use of vp9_get_segdata()
when it should be vp9_segfeature_active().
Change-Id: I1eb97d33df6e2a42cc589049f704266fe3639902
ref_frame in MB_Mode_Info was changed in the ref frame coding patch
to be an array to handle first and second reference frame, this patch
fix the loop filter code that use the pointer directly as reference
frame.
Change-Id: I71afa5a49deb50c1bc38029fd07470b984c6dfe9
Code intra/inter, then comp/single, then the ref frame selection.
Use contextualization for all steps. Don't code two past frames
in comp pred mode.
Change-Id: I4639a78cd5cccb283023265dbcc07898c3e7cf95
Split partition probabilities between keyframes and non-keyframes,
since they are fairly different. Also have per-blocksize interframe
y intramode probabilities, since these vary heavily between different
blocksizes.
Lastly, replace default probabilities for partitioning and intra modes
with new ones generated from current codec. Replace counts with actual
probabilities also.
Change-Id: I77ca996e25e4a28e03bdbc542f27a3e64ca1234f
This version of the loop filter supports non-4:2:0 subsampling and
a fourth plane, as well as changing the filtering order to be more
friendly to hardware implementations.
The filters are applied first to all vertical edges within the
64x64 SB, followed by the top horizontal edge and any internal
horizontal edges. Since filtering is applied on each 4x4 edge
serially, a dependency is created from filtering one block edge
to the next. It would be possible to remove this depencnecy by
building all filtering decisions from the unfiltered
reconstruction data.
Change-Id: I08f3e9683eb7bded8a76651cbc50fc0dfdd05fa7
This avoids encoding tokens for blocks that are entirely
in the UMV border. This changes the bitstream.
Change-Id: I32b4df46ac8a990d0c37cee92fd34f8ddd4fb6c9
This commit makes the coding/reconstruction operations of intra
coding rate-distortion loop for UV components consistent with those
of the encoding process.
key frame coding gains:
derf: 0.11%
stdhd: 0.42%
Change-Id: I8d49f83924a320e3689ef2d60096c49d7f0c7a40
Adds backward adaptation and differential forward updates of switchable
interpolation filter probabilities. Also adds some cosmetic cleanups
and minor fixes on mv_ref probabilities.
derfraw300: +0.353% (with most coming from switchable interp changes)
Change-Id: Ie2718be73528c945fd0d80cfd63ca2d9cb3032de
Restrict get_matching_candidate() to considering
mvs at 8x8 and larger sizes for last frame case.
This is to reduce the HW load of using vectors down
to the 4x4 level from the previous frame.
Change-Id: I6505e610fd63a4e22d67f136aec7905a01b893ba
This speed 1 - uses variance threshold stolen from static-thresh
to determine split. Any superblock with greater than the variance
set by static thresh * quantizer index squared is split. In addition
transform size is set to largest size less than or equal to partition
size, sub pixel filter is set to normal, and only 12 modes are used
at all.
Change-Id: If7a2858ee70f96d1eb989c04fd87a332b147abef
We leave it in rdopt.c as a local define for now - this can be removed
later. In all other places, we remove it, thereby slightly decreasing
the size of some arrays in the bitstream.
Change-Id: Ic2a9beb97a4eda0b086f62c039d994b192f99ca5
It remains as a local define in rdopt.c so we can distinguish between
split and non-split modes in the RD loop, but disappears outside that
scope in the codec.
Change-Id: I98c18fe5ab7e4fbd1d6620ec5695e2ea20513ce9
The commit changed to use a new variant of Walsh-Hadamard Transform
by Tim Terriberry. This new variant has the best compression among a
number of variants that developed by Tim.
Change-Id: Icb3a88515463cfc644b17ca046fcd139db2557e9
The first 240 coeff positions (15 top-left blocks) are scanned in the
same order as in scatter scan, after that the coeffs are scanned in
"block bands", each band at a time, all coeffs in one band before
moving on to the next band. This brings down the amount of 4x4 coeff
blocks that need to be buffered while scanning, from 15 blocks to 8 blocks.
Change-Id: I478a991d63c48bd5e64d36e59fed7a00c9a651ba
This patch removes the implicit segmentation
experiment from the code base as the benefits
were still unproven as of the bitstream deadline.
Change-Id: I273b99d8d621d1853eac4182f97982cb5957247e
Added two flags to the frame header:
intra_only:
Signals that the frame is encoded using only INTRA
coding modes.
reset_frame_context:
Indicates that the coding context specified
in the frame header should be reset to default values before the
frame is encoded/decoded.
Change-Id: I182d46f1f84fb67a13c46ad767f246a38d7861a2
This patch changes the coefficient tree to move the EOB to below
the ZERO node in order to save number of bool decodes.
The advantages of moving EOB one step down as opposed to two steps down
in the other parallel patch are: 1. The coef modeling based on
the One-node becomes independent of the tree structure above it, and
2. Fewer conext/counter increases are needed.
The drawback is that the potential savings in bool decodes will be
less, but assuming that 0s are much more predominant than 1's the
potential savings is still likely to be substantial.
Results on derf300: -0.237%
Change-Id: Ie784be13dc98291306b338e8228703a4c2ea2242
This patch checks at the frame level to see if the previous
mode info context can be used. This patch eliminates the
flag check that was done for every mode and removes another
check that was done prior to every vp9_find_mv_refs().
Change-Id: I9da5e18b7e7e28f8b1f90d527cad087073df2d73
Proposal for tuning the residual coding by changing how the context
from previous tokens is calculated. Storing the energy class of previous
tokens instead of the token itself eases the critical path of
HW implementations.
Change-Id: I6d71d856b84518f6c88de771ddd818436f794bab
Adding API to read/write uncompressed frame header bits (it is not final
yet). Separate functions to read/write uncompressed header. Moving
clr_type, error_resilient_mode, refresh_frame_context,
frame_parallel_decoding_mode, frame_context_idx from compressed partition
to uncompressed frame header.
Change-Id: Id3ed8a387980c652ae147549412f4ec24a0a5bd0
Removed one 4x4 prediction step that was unnessary in the rd loop.
Removed a unused modecosts estimate from encoder side.
Change-Id: I65221a52719d6876492996955ef04142d2752d86
1. remove prediction mode conversion
2. unified bmode, same for key and non-key frame
3. set I4X4_PRED count for pdf to 0, as I4X4_PRED is no longer
coded ever. It is determined by ref_frame and block partition
Change-Id: If5b282957c24339b241acdb9f2afef85658fe47d
This commit removes the use of bmi_ in the first-pass encoding by
forcing encode_intra4x4block_ to use DC_PRED, followed by DCT_DCT
only, as John suggested. This makes the need for bmi buffer only
up to 4 entries, instead of 16.
Change-Id: I3410007dfae789ee46a09ae20c39d3ce3c7954aa
Also do per-partition motion vector referencing in <sb8x8 partitions,
and adjust mvref finding for sub8x8 partitions.
Change-Id: Id3ed1ed4d2a8910d11d327db6cc63b8eb79f941f
The changing in intra coding to base on transform block, i.e. pred->
txfm->quant->dequant-itxfm->recon, made all blocks within a prediction
unit behave consistently, there is no longer a need to handle blocks
differently based on the position within a predicitn block. So this
commit simplifies the decision of transform type to be based on
prediction mode only.
Change-Id: If96cb72386f2e9186126ace88afa35ef085b6c96
Move 4x4/4x8/8x4 partition coding out of experimental list.
This commit fixed the unit test failure issues. It also resolved
the merge conflicts between 4x4 block level partition and iterative
motion search for comp_inter_inter.
Change-Id: I898671f0631f5ddc4f5cc68d4c62ead7de9c5a58
Reverts to using 128 bit LUT for the coef models rather than 48
to ease hardware implementation.
Also incorporates some cleanups including removing various
hooks to support different lookup tables based on block_type and
ref_type.
Change-Id: I54100c120cca07a2ebd3a7776bc4630fa6a153f6
This commit changed the encoding and decoding of intra blocks to be
based on transform block. In each prediction block, the intra coding
iterates thorough each transform block based on raster scan order.
This commit also fixed a bug in D135 prediction code.
TODO next:
The RD mode/txfm_size selection should take this into account when
computing RD values.
Change-Id: I6d1be2faa4c4948a52e830b6a9a84a6b2b6850f6
This commit allows the rate-distortion optimization of intra coding
capable of supporting 8x4 and 4x8 partition settings.
It enables the entropy coding of intra modes in key frame using a
unified contextual probability model conditioned on its above/left
prediction modes.
Coding performance:
derf 0.464%
Change-Id: Ieed055084e11fcb64d5d5faeb0e706d30268ba18
The API is not final yet and can be changed. Actual layout of
uncompressed frame part will be finalized later. Right now moving
clr_type, error_resilient_mode, refresh_frame_context,
frame_parallel_decoding_mode from first compressed partition to
uncompressed frame part.
Change-Id: I3afc5d4ea92c5a114f4c3d88f96858cccc15b76e
Uses more aggrerssive interpolation to reduce storage for the
model tables by almost more than half. Only 48 lists of probs are
stored (as opposed to 128 before), corresponding to ONE_NODE
probabilities of:
1,
3, 7, 11, ..., 115, 119,
127, 135, ..., 247, 255.
Besides, only 1 table is used as opposed to 2 before. So the overall
memory needed for the tables is just 48 * 8 = 384 bytes.
The table currently used is based on a new Pareto distribution with
heavier tail than a generalized Gaussian - which improves results on
derf by about 0.1% over a single table Generaized Gaussian.
Results overall on derfraw300 is -0.14%.
Change-Id: I19bd03559cbf5894a9f8594b8023dcc3e546f6bd
Cleans up the experiment. Actually uses reduced counts for backward
updates, and reduced number of probabilities in the context.
No change in bitstream when the experiment is on.
Between expt on and off:
derfraw300 is down only -0.062% (which is better than when expts
were run previously).
Change-Id: I55285a049a0c22810bdb42914212ab5a4f8521b5
This patch eliminates the intermediate diff buffer usage by
combining the short idct and the add residual into one function.
The encoder can use the same code as well.
Change-Id: I296604bf73579c45105de0dd1adbcc91bcc53c22
The recursive partition type search is enabled down to 4x4, 4x8 and
8x4, followed by the corresponding rate-distortion optimization for
the per-partition encoding mode decisions.
The bit-stream writing/reading synchronized in supporting the
rectangular partition of 8x8 block.
This provides above 1% coding performance gains on derf.
To do next:
1. re-design the rate-distortion loop for inter prediction below 8x8.
2. re-design the rate-distortion loop for intra prediction below 4x4.
3. make the loop-filter aware of rectangular partition of 8x8 block.
4. clean the unused probability models.
5. update default probability values.
Change-Id: Idd41a315b16879db08f045a322241f46f1d53f20
Replace vp9_kf_default_bmode_counts structure with
direct default probabilities. The probability structure is
smaller and it removes the need to specify in the bitstream
how to convert the counts to probabilities.
Note that I have concerns still about the size and value of
the large intra mode context. This may cause problems for
HW but it also means we rely heavily on reverse update as
forwards update of a structure this size is problematic. I
intend to review this more generally in the next few days to
see if we can come up with a competitive solution that does
not rely on such a large context.
Change-Id: I0a36071079d5d26a57ab0e9fbf91af4199aa7984
This is a mostly-working implementation of an extra channel in the
bitstream. Configure with --enable-alpha to test. Notable TODOs:
- Add extra channel to all mismatch tests, PSNR, SSIM, etc
- Configurable subsampling
- Variable number of planes (currently always uses all 4)
- Loop filtering
- Per-plane lossless quantizer
- ARNR support
This implementation just uses the same contents as the Y channel
for the A channel, due to lack of content and general pain in
playing back 4 channel content. A later patch will use the actual
alpha channel passed in from outside the codec.
Change-Id: Ibf81f023b1c570bd84b3064e9b4b8ae52e087592
Test on cif set showed small but consistent compression gain for
almost all encodings with overall impact of .08%. The gains average
aournd .12% combined with D63 adst change.
Test encoding on std-hd set is ongoing..
Change-Id: If4d94799cf0486fb9c770b193e5c386d13d99d59
This patch eliminates the intermediate diff buffer usage by
combining the short idct and the add residual into one function.
The encoder can use the same code as well.
Change-Id: Iacfd57324fbe2b7beca5d7f3dcae25c976e67f45
These building blocks enable rate-distortion optimization search
over block sizes of 8x4 and 4x8. Need to convert them into mmx/sse
forms.
Change-Id: I570ea2d22d14ceec3fe3575128d7dfa172a577de
This patch creates a new inter mode contest that avoids
a dependence on the reconstructed motion vectors from
neighboring blocks. This was a change requested by
a hardware vendor to improve decode performance.
As part of this change I have also made some modifications
to stats output code (under a flag) to allow accumulation of
inter mode context flags over multiple clips
Some further changes will be required to accommodate the
deprecation of the split mv mode over the next few days.
Performance as stands is around -0.25% on derf and
std-hd but up on the YT and YT-HD sets. With further tuning
or some adjustment to the context criteria it should be
possible to make this change broadly neutral.
Change-Id: Ia15cb4470969b9e87332a59c546ae0bd40676f6c
This commit allows proper transform type (DCT/ADST) selection in
the settings of partition 4x4 level.
Change-Id: Iec6f922a46480d777e7ca9142a99e8c131f0077b
This patch eliminates the intermediate diff buffer usage by
combining the short idct and the add residual into one function.
The encoder can use the same code as well.
Change-Id: Iea7976b22b1927d24b8004d2a3fddae7ecca3ba1
Trial use of a combination of reference frame,
prediction block size and mv to define segmentation.
Change-Id: Ie8946a0446dbad777fdcf7626f89e5af0994db50
This patch eliminates the intermediate diff buffer usage by
combining the short idct and the add residual into one function.
The encoder can use the same code as well.
Change-Id: I4ea09df0e162591e420d869b7431c2e7f89a8c1a
This commit allows the rate-distortion optimization recursion
at encoder to go down to 4x4 block size. It deprecates the use
of I4X4_PRED and SPLITMV syntax elements from bit-stream
writing/reading. Will remove the unused probability models in
the next patch.
The partition type search and bit-stream are now capable of
supporting the rectangular partition of 8x8 block, i.e., 8x4
and 4x8. Need to revise the rate-distortion parts to get these
two partition tested in the rd loop.
Change-Id: I0dfe3b90a1507ad6138db10cc58e6e237a06a9d6
Change band calculation back to simpler model based
on the order in which coefficients are coded in scan order
not the absolute coefficient positions.
With the scatter scan experiment enabled the results were
appear broadly neutral on derf (-0.028) but up a little on std-hd +0.134).
Without the scatterscan experiment on the results were up derf as well.
Change-Id: Ie9ef03ce42a6b24b849a4bebe950d4a5dffa6791
Move set_partition_seg_context_ to common file. Use consistent
context setup conditions for partition probability model update at
encoder and decoder.
Change-Id: I24b7ed3b1c48e3d2568191a46b70136b99b67b1a
In current code, motion vectors got from single prediction mode are used
in compound prediction mode directly. These motion vectors may not give
accurate prediction since they are searched independently. In this patch,
we took Pascal's suggestion, and did joint motion search in compound
prediction mode to find better motion vectors in this situation.
Test results:
Overall PSNR: 0.570%(derf), 0.918%(stdhd);
SSIM: 0.572%(derf), 1.009%(stdhd);
The encoder is a little slower. This can be improved since some c
code is used in motion search.
Change-Id: Ib30c9240f6c56c9b070867b4ca89412a76d9f3c6
The previous code was somewhat vestigial for 16x16 MI units, but was
incorrect when called with chroma blocks larger than 4x4 because the
block index caused a reference to a non-existent BMI. This patch uses
the same MV for all chroma subblocks in SPLITMV mode, which is
suboptimal for non-4:2:0 subsamplings, but as SPLITMV may be removed
in the near future, will use this as a stop gap.
Change-Id: I3211cee5ccf1cfb426e5eef5353b0ce5bb92b4cd
Make framebuffer allocations according to the chroma subsamping
factors in use. A bit is placed in the raw part of the frame header for
each of the two subsampling factors. This will be moved in a future
commit to make them part of the TBD feature set bits, probably only set
on keyframes, etc.
Change-Id: I59ed38d3a3c0d4af3c7c277617de28d04a001853
Update and buffer left/above partition information context per 8x8
block. This allows to further enable recursive partition down to
4x4 block size, and hence deprecating I4X4_PRED and SPLITMV.
This commit also fixes a context buffer swap/restore issue in 32x32
partition type search. This gives 0.1% performance gain for derf/yt.
Will refactor the superblock partition type search into recursion
form.
Change-Id: Ib61975aca5f12b78d8018481d7fa1393d085689b
Skip Q values between the q.0 mode and a real q of
2.0 as these are not valuable from an RD perspective.
Change-Id: I110c4858c57f97315953f4d88a2596d4764360df
This setup is now handled by vp9_build_intra_predictors()
when left_available and/or up_available is zero.
Change-Id: I59cec0ab95f8be69ce885fd20727510e4deef8a0
This allows removing a large number of transform size specific functions,
as well as supporting 444/alpha by routing all code through the
subsampling-aware path.
Change-Id: Ieb085cebe9f37f24fc24de179898b22abfda08a4
The number of reference buffers is extended to 8 and
a reference sign-bias added for the LAST_FRAME.
Whilst the number of reference buffers used by an
individual frame remains unchanged at 3, these may
now be selected from 8 possible buffers.
Change-Id: I2d247b9c1c2b3a339d6c9fac125e81ba373f75a7
Work-in-progress, not yet ready for review. TODO items:
- bitstream writing (encoder) and reading (decoder)
- decoder reconstruction
Change-Id: I5afb7284e7e0480847b47cd0097cb469433c9081
Changing the order of probabilities inside mb_segment_tree_probs in order
to use treed_read/treed_write function instead of custom code.
Change-Id: I843487d5057913b9358db73da270893eefecc6c8
Moving common code from encoder and decoder to vp9_get_qindex function.
Also moving quant-related constants from vp9_onyxc_int.h to
vp9_quant_common.h.
Change-Id: I70c5bfbaa1c8bf00fde0bfc459d077f88b6d46c8
Separate the functionality of I4X4_PRED from decode_mb. Use
decode_atom_intra instead, to enable recursive partition of superblock
down to 8x8.
Change-Id: Ifc89a3be82225398954169d0a839abdbbfd8ca3b
Also fixed two minor subtle boundary conditions in intra prediction
code, and replaced memcpy/memset with vpx_ prefixed version.
Change-Id: I9cddff3be831228b628f1f2f065a61feacbcbee6
The commmit changed to use same intra prediction function for all
block sizes.
Some details on the changes:
1. All directional modes except DC/TM/V/H now have built-in filtering
for all pixels with filter taps either (1, 2, 1)/4 or (1, 1)/2.
2. Above edge get automatic extended to double width (bw*2), which
makes a lot of the prediciton mode computation simpler.
3. Same intra prediction function is called with different size
for i4x4_pred and all other larger size.
Overall, the change helped keyframe only coding for both cif size
and std-hd size test sets by .5% consistently on all encodings.
For normal coding with single/auto key frame, the change now also
is consistently net positive for all encodings. The overall gains
is about .15% on std-hd set.
Change-Id: I01ceb31fbc73d49776262e6bdc06853b03bbd1d1
Output changes slightly because of a minor bug in (at least) the sb32x16
block2above tx16x16 tables that previously existed in vp9_blockd.c.
Change-Id: I624af28ac200a8322d64454cf05c79e9502968cc
Turns model based reverse updates on for coefficients in an
effort to reduce the memory requirement for counters.
With this patch the counters needed will be reduced by about
75% since only 3 counts are needed instead of 12.
The impact in performance is:
derf300: -0.252%
stdhd250: -0.046%
However retraining should alleviate some of the drop in
performance.
Change-Id: I6f2b3e13f6d5520aa3400b0b228fb5e8b4a43caa
Conflicts:
vp9/common/vp9_findnearmv.c
vp9/common/vp9_rtcd_defs.sh
vp9/decoder/vp9_decodframe.c
vp9/decoder/x86/vp9_dequantize_sse2.c
vp9/encoder/vp9_rdopt.c
vp9/vp9_common.mk
Resolve file name changes in favor of master. Resolve rdopt changes in
favor of experimental, preserving the newer experiments.
Change-Id: If51ed8f457470281c7b20a5c1a2f4ce2cf76c20f
All members can be referenced from their per-plane counterparts, and
removes assumptions about 24 blocks per macroblock.
Change-Id: I7ff2fa72d22c29163eb558981c8193765a8113d9
This originally was "Removed update_blockd_bmi()". Now,
this patch removed bmi from blockd and uses the bmi found
in mode_info_context. Eliminates unnecessary bmi copies between
blockd and mode_info_context.
Change-Id: I287a4972974bb363f49e528daa9b2a2293f4bc76
Basic assumption: when talking about transform units, use b_; when
talking about macroblock indices, use mb_.
Change-Id: Ifd163f595d4924ff892de4eb0401ccd56dc81884
The underlying storage for these buffers is in the per-plane MACROBLOCKD
area, so read it from there directly.
Change-Id: Id6bd835117fdd9dea07db95ad06eff9f12afaaf7
All members can be referenced from their per-plane counterparts, and
removes assumptions about 24 blocks per macroblock.
Change-Id: I593fb0715e74cd84b48facd1c9b18c3ae1185d4b
Remove similarly named header file. It is obsolete.
Move file to match naming style.
Adjust make file to include the file correctly and remove extra
unnecessary #if guard.
Change-Id: Ifba07ba9938a5df08a9f4eda54a3ac4d6983f7bf
