While turning on "--aq_mode=3", the quantizers are updated by each
thread. Fixed the me consts initialization function to make sure
that the correct thread data are updated.
Change-Id: Ied27bb7bae76fc3fa2cda4f8c35ac0b46271bef4
This saves an extra 64x64 variance calculation and replaces two
32x32 variance functions with sad functions. The compression
performance change is unnoticeable.
Change-Id: I6d33868695664ec73b56c42945162ae61c484856
Frame buffers are now allocated dynamically on-demand.
Entries in the reference frame map, cm->ref_frame_map,
may now be set to -1 (INVALID_IDX) to indicate that
there is not a valid reference buffer in that "slot".
All slots in the reference frame map are now initialized
to the empty state (-1) and each buffer is initialized
to have a reference count of 0.
Change-Id: Id1afe98de98db4ae8b2dfefed7889c3b28c68582
Use rectangular block size for integral projection motion estimation
if the the 64x64 block has over half block outside the frame. This
avoids the issue that the motion information of these blocks is
dominated by the extended pixels, instead of the pixels of interest.
Change-Id: I22f4d2bb7f6a20db9b3f5e2e5463a7f4b9d1b737
The rounding factor needs to be scaled down by a factor of 2.
Also, the quantized and dequantized coefficients are memset to 0
when dc quantizer is used.
Change-Id: Ifa68bab02addbf1b83d249c5b4cbd5cda796b1cf
Instead using only a fixed threshold, this commit adapts the threshold
for color sensitivity decision to luma signal energy: chroma channel's
sse is at least 1/6 of that in luma for color sensitivity flag to be
set to active.
This recoups a large portion of the speed loss due to accounting for
chroma component costs in RTC mode decision.
Change-Id: Ie01f747f6037dba6a1d1ed3e10b71a0ef1abc42c
This commit replaces the SAD with variance as metric for the
integral projection vector match. It improves the search accuracy
in the presence of slight light change. The average speed -6
compression performance for rtc set is improved by 1.7%. No speed
changes are observed for the test clips.
Change-Id: I71c1d27e42de2aa429fb3564e6549bba1c7d6d4d
This commit applies one-step refinement search to the resulting
motion vector of the integral projectiion based motion estimation,
per 64x64 block. It improves the coding performance of speed -6.
pedestrian 1080p 500 kbps
51735 b/f, 36.794 dB, 16044 ms ->
51382 b/f, 36.793 dB, 16282 ms
cloud 1080p 500 kbps
24081 b/f, 37.988 dB, 14016 ms ->
23597 b/f, 38.076 dB, 12774 ms
vidyo1 720p 1000 kbps
16552 b/f, 40.514 dB, 8279 ms ->
16553 b/f, 40.543 dB, 8510 ms
The rtc set compression performance is improved by 0.5%.
Change-Id: I3d09bea2caf58b2a4f3b38aa26fffafcbe9a2c17
This commit modifies the hierarchical vector match patter. It
avoids repeated SAD computation at same points. The function
vp9_vector_sad_sse2 is called 12 times per 64x64 block, instead
of 15 times as before. The effective coverage remains the same.
Change-Id: I91ad9d27d40db8963c907d02af84e10702136994
Target higher delta-qp for big blocks with zero motion,
and for segment#1: avoid 64x64 partition size and force 8x8 tx size.
Metrics on RTC set mostly positive: SSIM up by ~4%, PSRN by ~1.5%.
Doesn't seem to be any change in speed.
Change-Id: I1f68fa3c4f62dab3b90cc58041f05ebb048ae5ac
This commit introduces a new block match motion estimation
using integral projection measurement. The 2-D block and the nearby
region is projected onto the horizontal and vertical 1-D vectors,
respectively. It then runs vector match, instead of block match,
over the two separate 1-D vectors to locate the motion compensated
reference block.
This process is run per 64x64 block to align the reference before
choosing partitioning in speed 6. The overall CPU cycle cost due
to this additional 64x64 block match (SSE2 version) takes around 2%
at low bit-rate rtc speed 6. When strong motion activities exist in
the video sequence, it substantially improves the partition
selection accuracy, thereby achieving better compression performance
and lower CPU cycles.
The experiments were tested in RTC speed -6 setting:
cloud 1080p 500 kbps
17006 b/f, 37.086 dB, 5386 ms ->
16669 b/f, 37.970 dB, 5085 ms (>0.9dB gain and 6% faster)
pedestrian_area 1080p 500 kbps
53537 b/f, 36.771 dB, 18706 ms ->
51897 b/f, 36.792 dB, 18585 ms (4% bit-rate savings)
blue_sky 1080p 500 kbps
70214 b/f, 33.600 dB, 13979 ms ->
53885 b/f, 33.645 dB, 10878 ms (30% bit-rate savings, 25% faster)
jimred 400 kbps
13380 b/f, 36.014 dB, 5723 ms ->
13377 b/f, 36.087 dB, 5831 ms (2% bit-rate savings, 2% slower)
Change-Id: Iffdb6ea5b16b77016bfa3dd3904d284168ae649c
This is to avoid redo the same calculation repeatly, and also allow
easier adjustments for further experiments.
This commit shall have no effect on quality/compression.
Change-Id: I4460acf5c808ff5518da18d21e002c5da58af857
This commit fixes the sub block partition size used in
fill_mode_info_sb. Previous implementation effectively disabled
the rectangular block sizes. This commit resolved this issue.
Change-Id: Ic1c383ab0a9a2e7d59e85b388093f1f1f94d1e7f
On rtc set:
speed 7 quality improves about 0.5%
speed 8 quality improves about 1.0%
Encoding time for speed 7 changes from 67804ms to 65889ms
Encoding time for speed 8 changes from 58659ms to 56808ms
Change-Id: Iabcfb53012fc1b9f3326cdbc167e5758b8c7ad30
This commit allows the encoder to account for additional chroma
plane costs in the mode decision process, if the current block
potentially contains significant color change. It improves the
visual quality at very low bit-rates.
The compression performance of dark720p is improved by 12.39% in
speed 6. For jimred at 150 kbps, the PSNR of V component (red)
increased by 0.2 dB, at the expense of about 5% increase in
encoding time. Note that for sequences where the chroma components
are fairly consistent, the encoding time increase is negligible.
On average the rtc set compression performance is improved by
1.172% in PSNR and 1.920% in SSIM.
Change-Id: Ia55b24ef23a25304f7ec9958fbf07fd6e658505c
1. move the check of search method of USE_TX_8X8 up one level to
avoid operations of build_tree_distributions()
2. count tx used and avoid computaton for coef udpate when one size
is not used at all.
Change-Id: Ia3e54a2588aa531c41377a1bfaa64385d04a592c
Floating point is used in vp9_convert_qindex_to_q(), so sometime unit
test ActiveMapTest would cause run time error without properly call
to clear_system_state to reset register status.
Change-Id: I181e9395148c44a6ca8b97d6e109bd4a152143c6
Add distortion threshold condition to refresh state of a coding block,
and allow for qp adjustment also for some intra modes and non-zero motion modes.
Also some code cleanup (remove unused variables/code).
Change-Id: I735fa2b28bc64f60e0323976b82510577b074203
For low spatial resolutions: bias partittion selection to smaller block sizes,
and base the variance computation on 4x4 down-sampling.
Also move the threshold computations into the choose_partitioning,
so they are computed once for each sb block.
On low-res clips (RTC_derf) PSNR/SSIMetrics increase by about 4-5%.
No change for resolutions above CIF.
Change-Id: I93f8ff742c8044786977bb6e31dcf8efda6dd1b0
This makes the inter_mode counts update consistent with other symbols.
Also, forward updates should work corerctly now.
Change-Id: Id98be26fd08875162e644bb8f1de6f0918f85396
