This issue is found when the denoising mode is set to kDenoiserOnYUVAggressive.
Updated the C code to make it the same with SSE version.
I also changed several lines in VP9 denoiser for the code style.
Change-Id: I640d48cf946fe8c6a400e6e252107501d1e226d3
Scale min_consec_zero_last wrt to #temporal layers,
and use full framerate as factor in noise metric.
Change-Id: Id0842b90164ce468d1236173c51965e7620c0e12
On key frame, will always start with normal denoising mode,
but based on a computed noise metric (normalized mse on source diff)
may switch to aggressive mode (and back down again).
Change-Id: I20330b2dcf3056287be37223302b2cab5fc103eb
Modify zero_mv bias condition to include check that "closest" reference is last_frame.
This is needed for temporal layers, where the last_frame is not always the closest reference.
Also, constain zeromv_count to be for last_frame reference.
Change-Id: I7af54a809ebf01ef43b9933c9d4095b6cb189390
This is needed to update the width/height and stride parameters
for the reference buffers that the denoiser uses.
Change-Id: Id51b3bdcb56bbbc8187865544ccd3d872a0d51fe
Since the UV decision to denoise is based on Y, we need to set
the default/initial denoiser decision_u/v to COPY_BLOCK,
to make sure if no uv_denoiser is applied we still update
(uv)running_avg with source.
Change-Id: I5af1c2afbd40c498cd3de208bea88c837099b24d
On a key frame, the denoised-running_avg for all references
frames should be updated with the source.
The altref denoised-running_avg was not being updated on key frame,
this fixes that.
Change-Id: Ie02cd0ba5383e013af59240e6df7e185d11703f6
For gcc, when libvpx config option debug is disabled, added the
flag -DNDEBUG to disable the assertions in libvpx for some speedup.
Change-Id: Ifcb7b9e8ef5cbe5d07a24407b53b9a2923f596ee
vp8/encoder/x86/denoising_sse2.c:35:10: error: taking the absolute value
of unsigned type 'unsigned int' has no effect [-Werror,-Wabsolute-value]
Change-Id: I749ba8e6f55dbd9b822bfd4260a8397554f5e524
C version and sse2 version, and off by default.
For the test clip used, the sse2 performance improved by ~5.6%
Change-Id: Ic2d815968849db51b9d62085d7a490d0e01574f6
Allow for an option to selectively apply the deblocking loop filter to the denoised
raw block, based on the denoised state (no-filter, filter with zero motion, or filter with non-zero motion)
of the current block and its upper and left denoised block.
This helps to reduce some blocking artifacts from the motion-compensated denoising.
Change-Id: I0ac4e70076df69a98c5391979e739a2681e24ae6
When this compiler flag is enabled, the encoder will write a denoised,
uncompressed, version of the input to denoised.yuv.
Change-Id: Ie0247f76b23219d95fe97dd70f23e097d742c249
By enabling the OUTPUT_YUV_SRC compiler flag, the encoder will write the raw
input to bd.yuv.
The functionality was mostly implemented, but in its previous state did not
compile.
Change-Id: Ia331ad0f4c6e6f9f51e8d42cd33ba8cc146b3dbf
Now match the "C" version of "Fix to reduce block
artifacts from vp8 temporal denoiser."
(see change id Id9b56e59e33f3c22e79d2f89f763bdde246fdf3f)
Change-Id: I99e569bb6af4ae3532621127e12bf917a48ba08e
In the current logic, if the sse for zero motion is smaller
than the sse for new_mv (i.e., best_sse), we may still end up
using the non-zero mv for denoising (if the magnitude of new_mv is above threshold).
This can happen for very noisy content, and can lead to artifacts.
This change ensures that we always use zero_mv (over new_mv) for
denoisng if sse_zero_mv <= best_sse.
Change-Id: I8ef9294d837b077013b77a46c9a71d17c648b48a
If the denoiser filter causes too big a change in the absolute pixel difference
(between source and denoised signal), the block is not denoised, which can cause
visual block artifacts. This change applies a second adjustment to the temporal filter
to effectively allow for a (weaker) denoising for such blocks (which can keep
the absolute differnence within the tolerance range in most cases).
This helps to reduce some of the block artifacts from the denoising.
The additional cost of re-applying the filter to this set of blocks is low,
as the percentage of blocks per frame (with too big a change in absolute pixel difference)
is typically small, 2-5%.
Change-Id: Id9b56e59e33f3c22e79d2f89f763bdde246fdf3f
Renames all x86_64 specific assembly files to consistently
end in _x86_64.asm. This will be useful for build systems to
handle these files differently.
All new 64-bit specific assembly files should use the new
naming convention.
Change-Id: I36c89584967c82ffc4088b1b5044ac15d2bb7536
As a side-effect, the max_sad check is removed from the
C-implementation of VP8, for consistency with VP9, and to
ensure that the SAD tests common to VP8/VP9 pass.
That will make the VP8 C implementation of sad a little slower
but given that is rarely used in practice, the impact will be
minimal.
Change-Id: I7f43089fdea047fbf1862e40c21e4715c30f07ca
Added macro to conditionally compile some of the
post-processing functions only when CONFIG_POSTPROC
is defined.
This was causing the build for the generic-gnu target
to fail.
Change-Id: Ibfa447feceb7a0528135025f105be48f97e9965c
The rounding of the ARNR filter output prior to
normalization by the filter strength was incorrect
when strength = 0.
In this case 1 << (strength - 1) would not create the
required rounding of 0, rather it would outrange. This
patch fixes this issue.
Change-Id: I771809ba34d6052b17d34c870ea11ff67b418dab
Used horizonal add instructions instead of adding
byte lanes. The encoder performance improved by
~4% for the test clip used.
Change-Id: Iaddd10403fcffb5b3f53b1f591ab2fe0ff002c08
This patch did a cleanup following the commit "Save NEON registers
in VP8 NEON functions". The pushing/poping of callee-saved NEON
registers was moved into individual NEON functions. Therefore,
we don't need to save those registers at the beginning of codec.
The related code was removed.
Change-Id: I5648166514fc9beffb780aa138495597731f49ea
The recent compiler can generate optimized code that uses NEON registers
for various operations besides floating-point operations. Therefore,
only saving callee-saved registers d8 - d15 at the beginning of the
encoder/decoder is not enough anymore. This patch added register saving
code in VP8 NEON functions that use those registers.
Change-Id: Ie9e44f5188cf410990c8aaaac68faceee9dffd31
Removing all copies of identical vp8_mse2psnr/vp9_mse2psnr functions.
Using vpx_sse_to_psnr() instead in all places.
Change-Id: I15beef9834d43d8fc8a8a7a2d1fc5de3d658fed8
Under a configuration change, where the bitrate suddenly decreases,
the buffer level may be larger than maximum allowed (for that first frame to be encoded after change_config).
This change keeps it clipped to its maximum level.
Change-Id: I4d0b5b3d1fd8148600dd39e02bd630c9464baba5
There were two problems with the format string in
the conditionally compiled print statement. It referred
to a variable that is no longer available and it used
incorrect format specifiers.
Change-Id: I315e22bea2691bb535a2e33f5ca206fc55287a37
When a frame is dropped due to |buffer_level| < 0 for a given temporal layer,
the buffer level for the upper temporal layers was not updated (in calc_pframe_target_size()).
This change fixes that.
Also, use the layer per-frame-bandwidth for updating the buffer level
of the higher layers when a frame is dropped.
Change-Id: I660c23f3229b47e9d124a950b480314b4307c5a8
coef_counts is now in cpi->mb, instead of cpi. The commit corrected the
mis-use and enable succefual build.
Change-Id: I0e77909d34571cfd2560c66b46b1f8fa0cd1a6b4
Jenkins warns on left shift of negative numbers and non-aligned read
of int. This commit fixed the two issues.
Change-Id: I389a7fb6a572c643902e40a4c10fefef94500d2c
these are only used in the encoder.
frames_since_golden / frames_till_alt_ref_frame -> VP[89]_COMP
Change-Id: Ie14a6f46987bced685ddb449b85dc261caba6dfe
this was never fleshed out in the context of VP8, for which it was
added. for VP9 it has no meaning.
Change-Id: Iba2ecc026d9e947067b96690245d337e51e26eff
If the codec was configured with --enable-internal-stats,
a seg fault would occur. This patch fixes the problem.
Change-Id: Id10a577973d185e93037c59e5b36bebdded327da
Condition the existing zbin boost logic for gf/altf mode to temporal layers==1,
since gf/altf reference frames are used in temporal layers as reference frames.
Change-Id: I618bb20730e5f193e078215d06f54997c363dd7b
Use a separate counter for resetting the pattern upon
a change in temporal layers, and set/initialize the
layer context parameters for the new temporal layer state.
Also moved the setting of layer configuation in init_config()
to a separate function.
Change-Id: Ic7fc023a1e5490020509e107004645098f4c00f0
Conflicts:
vp9/common/vp9_findnearmv.c
vp9/common/vp9_rtcd_defs.sh
vp9/decoder/vp9_decodframe.c
vp9/decoder/x86/vp9_dequantize_sse2.c
vp9/encoder/vp9_rdopt.c
vp9/vp9_common.mk
Resolve file name changes in favor of master. Resolve rdopt changes in
favor of experimental, preserving the newer experiments.
Change-Id: If51ed8f457470281c7b20a5c1a2f4ce2cf76c20f
The only reason for the _intrinsics part of the file name was for the
interim period where only one of the functions was redone and the base
file name was the same.
Change-Id: I7851154f1633d48821bee885b1cadb2148e65a23
This is work-in-progress, it implements multiple ARF
encoding behind an experimental flag.
It adds the ability to insert multiple ARF frames into a
single ARF group. This patch implements the reordering
of the coded frames, and implements a fixed-length coding
pattern. It applies a fixed quantizer strategy based on
where the frame is in the coding sequence.
Further work to modify the rate control strategy is
ongoing and will be submitted via a set of future patches.
In this first step, each ARF group is recursively
bisected and an ARF frame added at that position in the
sequence. The recursion continues until ARF frames are
within MIN_GF_INTERVAL frames.
The code sits behind the "multiple-arf" experimental
flag ("CONFIG_MULTIPLE_ARF"). The experimental flag
"oneshotq" ("CONFIG_ONESHOTQ") also needs to be enabled
for this patch to work correctly.
Change-Id: Ie473b05ebb43ac473c0cfb659b2b8042823085e2
Use local variable for setting the improved prediction mode.
cpi->sf.improved_mv_pred is set/fixed at the frame level
and should not be changed inside pick_inter_mode.
Change-Id: Ie28d9171ac000e631af0e30204970e3d4fff3078
Pick up VP8 encryption, quantization changes, and some fixes to vpxenc
Conflicts:
test/decode_test_driver.cc
test/decode_test_driver.h
test/encode_test_driver.cc
vp8/vp8cx.mk
vpxdec.c
vpxenc.c
Change-Id: I9fbcc64808ead47e22f1f22501965cc7f0c4791c
and denoising.c
Adding -Wshadow to CFLAGS generated a bunch of warnings. This patch
removes these warnings.
Change-Id: I434a9f4bfac9ad4ab7d2a67a35ef21e6636280da
ratectrl.c and quantize.c
Adding -Wshadow to CFLAGS generated a bunch of warnings. This patch
removes these warnings.
Change-Id: I8c8faa9fde57c1c49662d332a90bc8d9a0f4a2ce
Remove dependency of this function on asm_offsets. ssse3/sse4 next.
Change quant_shift calculation so it be done using SIMD. Pre-calculate
as much as possible to simplify EOB selection.
Take advantage of qcoeff being zero'd by tying the if statements
together.
Speed parity with previous implementation with gcc x86_64 linux
Change-Id: Ife97556a1eca3a74b09def1a3d04084974dff1fb
