In the full-rd transform size search, we go through all transform
sizes to choose the one with best rd score. In this patch, an
early termination is added to stop the search once we see that the
smaller size won't give better rd score than the larger size. Also,
the search starts from largest transform size, then goes down to
smallest size.
A speed feature tx_size_search_breakout is added, which is turned off
at speed 0, and on for other speeds. The transform size search is
turned on at speed 1.
Borg test results:
1. At speed 1,
derf set: psnr gain: 0.618%, ssim gain: 0.377%;
stdhd set: psnr gain: 0.594%, ssim gain: 0.162%;
No noticeable speed change.
3. At speed 2,
derf set: psnr loss: 0.157%, ssim loss: 0.175%;
stdhd set: psnr loss: 0.090%, ssim loss: 0.101%;
speed gain: ~4%.
Change-Id: I22535cd2017b5e54f2a62bb6a38231aea4268b3f
This commit enables the encoder to record the location of the
center frame to generate alter reference frame. It then allows to
skip checking prediction modes of other reference frame types when
it comes to encode this frame.
The speed 3 runtime is reduced for the test sequences:
bus at CIF 1000 kbps, 9791 ms -> 9446 ms, i.e., 3.5% speed-up,
pedestrian at 1080p 2000 kbps, 184043 ms -> 175730 ms, i.e., 4.5%
speed-up.
No compression performance change observed.
Change-Id: Iacfde3bcc1445964e7a241f239bd6ea11cb94bd1
This reverts commit 5509b7fd8f
Observed a big drop in compression quality and speed for speed 1 for a 360p test clip, revert this now for investigation.
Change-Id: If69dc8d77a225b34dc7907a9472e1a7a0a22762d
Add a speed feature to give the tighter partition search
range. Before partition search, calculate the histogram
of the partition sizes of the left, above and previous
co-located blocks of the current block. If the variance of
observed partition sizes is small enough, adjust the search
range around the mean partition size, which will be tigher.
The feature is currently turned on at speed 2. Experiments on
sample youtube clips show on average the runtime is reduced
by 3-7%.
For hard stdhd clips:
park_joy_1080p @ 15000kbps: 509251 ms -> 491953 ms (3.3%)
pedestrian_area_1080p @ 2000kbps: 223941 ms -> 214226 ms (4.3%)
The PSNR performance is changed:
derf: -0.112%
yt: -0.099%
hd: -0.090%
stdhd:-0.102%
Change-Id: Ie205ec5325bf92ec5676c243e30ba9d0adca10f2
At --good and speed 3 or above for resolution less than 720p. This
disables the tests for 64x64 intra prediction modes. Encoding time
reduction is about 1%.
Change-Id: Ib396e3d1417fece416e3f0fee929b128acbb130f
The test to determine if the mode info buffers need
to be resized when the frame size changes was
incorrect, as per bug 837.
By storing the size of the allocated data structure,
a simple test determines whether to allocate more
memory when the frame size changes.
Change-Id: I1544698f2882cf958fc672485614f2f46e9719bd
In the encoder, current_video_frame is used in a couple of places to
decide encoding strategy, this commit replaces with more appropriate
variables.
Change-Id: I3d3d8d8e2ea02c489e4639b9d4c446a63e357d29
This commit moves the simplified coefficient probability model
and costing update to speed 4, and turns on chessboard pattern
mode search for sub 720p sequences. The overall coding performance
of speed 3 is improved:
derf 0.889%
stdhd 1.744%
The speed 3 runtime for test sequences are improved:
bus cif at 1000 kbps 9823 ms -> 9642 ms
pedestrian 1080p 2000 kbps 189559 ms -> 183284 ms
Change-Id: Iecbc7496a68f31fd49fb09f8dfd97c028d675a5d
This commit enables the encoder to skip NEARMV and ZEROMV if the
above and left blocks have identical reference frame, and the
current reference is different from that. It reduces the runtime
of speed 3 for test sequences:
bus cif at 1000 kbps 10064 ms -> 9823 ms
pedestrian 1080p at 2000 kbps 193078 ms -> 189559 ms
The compression performance is changed by
derf -0.085%
stdhd -0.103%
Change-Id: If304f26d42e6412152a84c3dd7b02635c38444f4
This commit allows the encoder to check the above and left neighbor
blocks' reference frames and motion vectors. If they are all
consistent, skip checking the NEARMV and ZEROMV modes. This is
enabled in speed 3. The coding performance is improved:
pedestrian area 1080p at 2000 kbps,
from 74773 b/f, 41.101 dB, 198064 ms
to 74795 b/f, 41.099 dB, 193078 ms
park joy 1080p at 15000 kbps,
from 290727 b/f, 30.640 dB, 609113 ms
to 290558 b/f, 30.630 dB, 592815 ms
Overall compression performance of speed 3 is changed
derf -0.171%
stdhd -0.168%
Change-Id: I8d47dd543a5f90d7a1c583f74035b926b6704b95
The function is called only once, right after all stats counters are
reset to 0. Therefore all the computations have zero effect on return
values. This commmit to removed those effectless code.
Change-Id: I50d27c0802547921fa36c60aa4bd92d76247f595
At speed 6 the smallest partitioning was 16x16 and biggest
intra block was 8x8, essentially disallowing all intra blocks
which produces ugly artifacts when revealing new video.
Change-Id: I364042d4c64e09be0666ade64aac94d0a1b586cf
This commit enables encoder to select fast forward transform and
quantization path according to the prediction residual sse/variance,
in the rate-distortion optimization scheme.
Change-Id: Ief9fc3844fd4107166d401970e800c6e5ce2b5fe
We had a very complicated way to initialize cpi->pass from
cfg->g_pass:
switch (cfg->g_pass) {
case VPX_RC_ONE_PASS:
oxcf->mode = ONE_PASS_GOOD;
break;
case VPX_RC_FIRST_PASS:
oxcf->mode = TWO_PASS_FIRST;
break;
case VPX_RC_LAST_PASS:
oxcf->mode = TWO_PASS_SECOND_BEST;
break;
}
cpi->pass = get_pass(oxcf->mode).
Now pass is moved to VP9EncoderConfig and initialization is simple:
switch (cfg->g_pass) {
case VPX_RC_ONE_PASS:
oxcf->pass = 0;
break;
case VPX_RC_FIRST_PASS:
oxcf->pass = 1;
break;
case VPX_RC_LAST_PASS:
oxcf->pass = 2;
break;
}
Change-Id: I8f582203a4575f5e39b071598484a8ad2b72e0d9
Eliminated instructions by using better neon instructions
and rearranging the loop.
On a Nexus 7, vpxenc (in realtime mode, speed -12)
reported a performance improvement of ~1.0%.
Change-Id: I6b1700e79318f647ea67ef25e954c308932950ec
Replaced encoder and decoder functions to get a pointer
to a reference frame with a common function, vp9_get_ref_frame,
and simplified it.
Change-Id: Icb206fcce8caace3bfd1db3dbfa318dde79043ee
in the sub_pixel_*variance* function the dst is aligned to 16 bytes and not
to 32 bytes - now load unaligned data
Change-Id: I2e0b9745543697efc56fefa32857ea10117af135
Fix the interaction between active map and reuse_inter_pred_sby. The
reuse_inter_pred_sby feature expects inter predictors to already be
built, but blocks with active map on skip this step.
Change-Id: Ibb2bf0d228f678935d82a0ede9cb0919ab7c8878
in the function sad32x32x4d and sad64x64x4d the source is aligned to 16 bytes
and not to 32 bytes - the load is now unaligned.
Change-Id: I922fdba56d0936b5cf72e4503519f185645a168c
Specifies the bit-depth, color sampling and colorspace
for intra only frames for profiles > 0
Also adds checks to ensure that profile 1 and 3 are
exclusively used for non 420 streams.
Change-Id: Icfb15fa1acccbce8f757c78fa8a2f60591360745
This commit integrates the fast transform and quantization process
into skip_recode scheme in the rate-distortion optimization loop.
Previously the fast transform and quantization process was only
enabled for non-RD coding flow.
Change-Id: Ib7db4d39b7033f1495c75897271f769799198ba8
vp9_rb_bytes_written -> vp9_wb_bytes_written
+ move limits.h from the header to the source file where it's needed
Change-Id: Ifcdc856b4d4dcc2fff555ef11f86c86a0d83dab3
This patch allows the encoder to directly split the block
in partition search, therefore skip searching NONE. It
computes a score which measures whether 16x16 motion vectors
from the first pass in the current block are consistent with
each others. If they are inconsistent and we have enough Q
to encode, split the block directly, and skip searching NONE.
This feature is under flag CONFIG_FP_MB_STATS. In speed 2,
it further gives a speedup of 3-8% on sample yt clips as
compared to the previous version under the same flag. Overall,
the features under the flag will give 7-15% on typical yt
clips at up to 6000kbps data rate. The speedup at very high
data rate is not significant.
For hard stdhd clips:
park_joy_1080p @ 15000kbps: 504541ms -> 506293ms (-0.35%)
pedestrian_area_1080p @ 2000kbps: 326610ms -> 290090ms (+11.2%)
The compression performance using the features under the flag:
derf: -0.068%
yt: -0.189%
hd: -0.318%
stdhd:-0.183%
To use the feature, set CONFIG_FP_MB_STATS and turn on
cpi->use_fp_mb_stats.
Change-Id: Iad58a2966515c8861aa9eb211565b1864048d47f
This code was being called from two places and
difficult to parse. I rationalized it in to a
function to improve readability.
Change-Id: I154b8fe0b84e6c01e69601e78e67bd47c954d8b6
Re-organize the one-byte structure for 16x16 first pass
block. Add bits to indicate motion vector directions.
Change-Id: Id10754ba343dfc712c7fed5bcc85c67fa0bbcb89
vp9_variance8x8(), and vp9_get8x8var().
On a Nexus 7, vpxenc (in realtime mode, speed -12)
reported a performance improvement of ~1.2%.
Change-Id: I8a66ac2a0f550b407caa27816833bdc563395102
This patch allows the encoder to skip the search for partition
SPLIT, HORZ, VERT after the search for partition NONE is done
in RD optimization. It uses the first pass block-wise statistics
to make the decision. If all 16x16 blocks in the current partition
have zero motions and small residues from the frist pass statistics,
and it has small difference variance, further partition search is
skipped.
For speed 2 setting, experiments on general youtube clips show that
the speedup varies from 1% - 10%, 5% on average. On the performance
side in PSNR, derf 0.004%, yt -0.059%, hd -0.106%, stdhd 0.032%.
For hard stdhd clips:
park_joy_1080p, 502952 ms -> 503307 ms (-0.07%)
pedestrian_area_1080p, 227049 ms -> 220531 ms (+3%)
This feature is under the compilation flag CONFIG_FP_MB_STATS and
it is off in current setting.
Change-Id: I554537e9242178263b65ebe14a04f9c221b58bae
Remove the variable that indicates the relative block index. This
is explicitly covered by the use of pc_tree.
Change-Id: Ib13142582fff926c85e375bde656aa050add8350
This commit enables a chessboard pattern constrained partition
search for 720p and above resolutions. The scheme applies stricter
partition search to alternative blocks based on its above/left
neighboring blocks' partition range, as well as that of the
collocated blocks in the previous frame. It is currently turned
on at 16x16 block size level. The chessboard pattern is flipped
per coding frame.
The speed 3 runtime is reduced:
park_joy_1080p, 652832 ms -> 607738 ms (7% speed-up)
pedestrian_area_1080p, 215998 ms -> 200589 ms (8% speed-up)
The compression performance is changed:
hd -0.223%
stdhd -0.295%
Change-Id: I2d4d123ae89f7171562f618febb4d81789575b19
vp9_variance16x16(), and vp9_get16x16var().
On a Nexus 7, vpxenc (in realtime mode, speed -12)
reported a performance improvement of ~16.7%.
Change-Id: Ib163aa99f56e680194aabe00dacdd7f0899a4ecb
This commit replace the repetitive retrieve of max and min allowed
partition from speed_feature with local variables max_size and
min_size.
Change-Id: Ib06f11f16615e4876e4dd5fb6a968c6bf5f7b216
The get_chessboard_index() used to call the entire VP9_COMMON
struct pointer to retrieve the chessboard pattern index. This cl
makes it call the frame index directly.
Change-Id: I3cad9d209ea2e77a358085a04fe1ff0ddec5ba03
Remove the redundant index computation when store the first
pass block-wise statistics. Currently, a single byte is
allocated for a 16x16 blocks, and all the frame statistics
saved during the first pass will be kept in memory for use
in the second pass. For a 1920x1080 300-frame clip, it will
take about 2.3 MB memory. This feature is off in current
setting.
Change-Id: I135a95b348ec093d54c6a07e1e8237626909e3bd
Remove all the redundant dct functions (dct4x4, dct8x8)
in avx2 except dct32x32 those functions were copied originally from dct_sse2
Change-Id: I742576fbf5175f3ac09f2076976a9247b259323e
The partition search for 4x4 blocks takes unnecessary steps to
reconstruct pixels and an extra partition type update. This commit
removes such operations. No visible compression/speed difference.
Thanks to Yue (yuec@) for finding this issue.
Change-Id: I3f83824aa3fd3717d63be0b280fa57258939a70a
The assignment of the variable mode_excluded in
vp9_rd_pick_inter_mode_sub8x8 takes redundant conditional jump.
This commit removes it.
Change-Id: Ie195fbe6e54ec2ade7093d562c456a2e93143704
1. Remove last reference flag for first frame upper layers in one pass mode.
2. Disable refresh golden frame flag for key frames.
Change-Id: I44ac1bd2c795169e4fbfdd078ea79a1d33a204d6
The value of mode_excluded has been properly set in
vp9_rd_pick_inter_mode_sb(). It is redundant to send it in
handle_inter_mode() and re-set the value again.
Change-Id: I408d4731f2f42e0bcf3ae62e85757717bb410471
This commit extends the chessboard pattern prediction filter search.
If the above and left blocks have the same prediction filter type,
the encoder will skip the prediction filter type search and use the
reference one.
The overall chessboard pattern prediction filter type search reduces
speed 3 runtime for hard clips. Experiments on park joy at 1080p
and 15000 kbps show that the runtime goes from 723265 ms to 65832 ms,
i.e., about 10% speed-up. Compression performance wise, it affects
the coding quality by
Change-Id: I880975497c7ad166532e9eea9bf46684d77ff327
derf: -0.326%
yt: -0.257%
hd: -0.241%
stdhd: -0.417%
This commit enables a chessboard pattern prediction filter type
search scheme for rate-distortion optimization speed-up. For the
inferred motion vector modes, the encoder can re-use its above/left
neighbor blocks' prediction filter type and skip a full test on
all possible filter types. Such operation is turned on/off
alternatively in a chessboard manner.
It is turned on in speed 3. For test clip pedestrian 1080p, the
runtime is reduced from 231500 ms -> 221700 ms. The compression
performance is changed:
derf: -0.147%
yt: -0.134%
hd: -0.079%
stdhd: -0.220%
Change-Id: I1912f278e7576c2dc632688e3ad7a257410c605a
When OUTPUT_YUV_DENOISED is enabled the encoder outputs the uncompressed,
denoised video to a separate file. Moved the point at which the file is
written to in order to avoid an extra blank frame at the beginning of the video.
Change-Id: I805f6a912b18b3d9cae59b13c5b8108279439ce3
This should be a local variable. Move the definition from
vp9_rd_pick_inter_mode_sb to handle_inter_mode.
Change-Id: I14f4168bb1c896ed04e8f6d4cd89fbf4c9839944
For sequences of resolution below 720p, the encoder will check
intra prediction modes and inter prediction modes from LAST_FRAME.
This commit turns on adaptive prediction filter scheme for sub8x8
blocks, where inter prediction modes are enabled. For the test
sequence bus at CIF, the speed 2 runtime goes down from 17879 ms
to 16783 ms, i.e., 6% speed up. The compression performance of
derf set is down by -0.128%.
Change-Id: I01d5321a5ceab4e0666ac5be56c52d896c7a8d45
The commit moved a call to vp9_clear_system_state() to a correct
location, i.e. prior function calls using floating point numbers.
This was to fix a mismatch mmx code and sse2 version, where a
floating point number used in adjust_frame_rate(cpi) gets NAN due
to mmx registers being in wrong state.
Change-Id: I40e0a6de98812000ccee6a729badb630604fd7e6
For gcc, when libvpx config option debug is disabled, added the
flag -DNDEBUG to disable the assertions in libvpx for some speedup.
Change-Id: Ifcb7b9e8ef5cbe5d07a24407b53b9a2923f596ee
Separates HBD profile int two profiles (2 and 3) consistent with the
highbitdepth branch. This patch is ported from the original highbitdepth
branch patch: https://gerrit.chromium.org/gerrit/#/c/70460/
Two of the invalid file tests needed to be updated.
Change-Id: I6a4acd2f7a60b1fb4cbcc8e0dad4eab4248431e3
The bug sets the wrong pointer to the first pass mb stats
if the encoder does the re-coding in the second pass.
Change-Id: I8a11f45dd7dceb38de814adec24cecccae370d00
This patch is the first step toward simplifying the
frame buffer handling.
The final goal is to have a common frame buffer handling
framework for both encoder and decoder that incorporates
the existing ability to use externally allocated memory.
Change-Id: I2c378a4f54a39908915f46c4260e17a080db7ff1
This commit changed the hard-coded DEFAULT_INTERP_FILTER to a speed
feature with the same default value: SWITCHABLE.
Change-Id: I7f54f40f1bd3f5277841d04b85db7a84e47313f1
and vp9_sad16x16_neon()
On a Nexus 7, vpxenc (in realtime mode, speed -6)
reported a performance improvement of ~17%.
Change-Id: I91e070cde2973451083d3f3d63b49b7886de9a85
2 pass only change to calculation of rd mult based on Q.
Make a small adjustment based on frame type and also
replace adjustment based on iifactor with an one based
on the ambient GF/ARF boost level.
Also fix multi arf bug / issue.
Overall these change give an slight improvement in ssim
but hurt psnr a little.
Change-Id: I5e1751e3ff5390a26f543d7855059e6fbcce105e
We target this speed to achieve similar encoding speed and better
compression than vp8 rt mode with cpu-used at -12.
Change-Id: Ic1bb4371c81a17ea80e83459c1cbf4c09a3498e8
In vp8, statistics are collected about the different modes as they are searched.
This process is more complicated due to the variable block size. Fields were
added to the PICM_MODE_CONTEXT struct to hold this information for each point in
the search. The information is then taken from the appropriate part of the tree
during denoising.
Change-Id: I89261ab77ad637821287ae157dfdf694702b8e77
All changes are for spatial svc only.
1. Enable encoding hidden frames in each layer and use alt reference idex to reference the hidden frame in each layer
2. Use golden reference idx for spatial reference
3. For those layers that don't have hidden frames (caused by lack of frame buffers), reference a hidden frame in lower layers
4. Add "auto-alt-refs" in svc options
Change-Id: Idf27d1fd2fb5f3ffd9e86d2119235e3dad36c178
This commit fixes a potential out-of-boundary memory access due to
the use of reuse_inter_pred_sby in the non-RD coding flow. It
resolves the corresponding asan error.
Change-Id: Iff605f5921230966990013541cd855d698810922
This commit fixes a mismatched use case of block size in non-RD
intra prediction check. The residual SSE and variance should be
calculated per transform block size, instead of operating block
size, which caused chrome valgrind warning on conditional jump
based on uninitialized value (webm issue 823). This commit
resolves this issue.
Change-Id: I595c06599c7e0fd0e4a08736519ba68fc14bc79a
Refactoring to remove some duplication of probability
tables between tokenization and detokenization.
Change-Id: I2fc6a6497f9c0410021a9b41f828bc58a864e466
Use a weaker filter for second level arf frames.
Average gain across all sets and metrics ~0.3%
Remove code for arnr_type which is no longer
supported in VP9 which always uses a centered blur.
Re-factor and some cleanup.
Change-Id: Ieb4b8940e99e4e02b3fcc9fca6f2d4109e6ed639
Currently, vp9_diamond_search_sadx4() is only called when sse3 is
enabled, which is improper since sse2 optimization of sdx4df
functions are available. Changed to always use
vp9_diamond_search_sadx4().
Change-Id: I4b95d6b7a3c6c645783c373f0ba8d645ece24717
There are sse2 optimization of sdx4df functions. Instead of calling
vp9_refining_search_sadx4 only when sse3 is enabled, call it always.
Change-Id: I24f93818f7d4209d1425039e0eb099ff9ff08fe9
Use FAST_HEX in speed 5 and 6, which covers more points than
FAST_DIAMOND and improves motion search quality.
At speed 6, RTC set borg tests showed slight quality gain (psnr
gain: 0.143%, ssim gain: 0.226%). No noticeable encoding speed
change.
Change-Id: Ifa62875d9a52ee382ec494f271382bb77d8c67bf
This commit combined the full pel and sub pel motion search into a
single function to avoid code duplication. The commit does not change
encoder outputs.
Change-Id: Ibe18342c4f64073bef20f9cf6c6ca0a20d01bf0d
This commit enables a new quantization process for 32x32 2D-DCT
transform coefficient blocks. It improves the compression
performance of speed 5 by 1.4%. The overall compression gains of
speed 5 due to the new quantization scheme is 4.7%. It also includes
the SSSE3 implementation of the 32x32 quantization process.
Change-Id: I0855b124fd6462418683f783f5bcb44255c9993b
In the previous version, only certain buffers in the macroblockd were saved and
the restored. In this version, all of the buffers are saved and restored. The
code was then rolled into a loop for readability.
Also contains a tiny fix for when the -DOUTPUT_YUV_DENOISED flag is used.
Change-Id: Id925ef8b3fa122ae88acfa1d9a1e4df45df83518
* Replace max_step_search_steps with constant MAX_MVSEARCH_STEPS
* Fold (reduce_first_step_size + speed > 5) into reduce_first_step_size
replacing uses of reduce_first_step_size that don't add the speed
check with zero.
Change-Id: Iae46395dbf3eaca138bf4d18b838a9e364b5a198
vp9_rdopt is for making rd optimal mode decisions. vp9_rd is for all
other rd related routines. Anything used outside of making an rd optimal
decision belongs in rd.
Change-Id: I772a3073f7588bdf139f551fb9810b6864d8e64b
Moved the threshold adjustment before reference flag checking,
which could set the threshold to INT_MAX for disabled reference
frame, and cause overflow if the adjustment is done after that.
Change-Id: I85e94f8726d5e3ae93f65965aa978721dddc9957
Renamed updating_running_avg() to filter(). Extended function with the rest of
the filter procedure. Made all of the empirically-determined constants used in
VP8 into functions so they can be tweaked more easily.
Change-Id: I41730c8c92370c76885950a43742347477ca4e7e
As in VP8.
Currently, this parameter is set with the VP8E_SET_NOISE_SENSITIVITY flag.
The flag was not renamed so that we don't break the interface for webrtc. This
should probably be changed at some point in the future.
Change-Id: Ic73fcb0dde9d1d019e9d042050b617333ac65472
Add test code to turn multi-arf on and off depending
on group length and zero motion.
Changes to active max group length for mult-arf.
Fund second arf only from normal frame bits.
Change-Id: I920287fac1c886428c15a39f731a25d07c2b796c
This commit added a speed feature to control the step_param used in
full pixel motion search. The intention is to reduced the search
steps for high speed real time coding.
Change-Id: I21d2f0105c2b647783a6688615da7fcf2b6d670b
Adapt the use of segmentation in AQ mode 2 based on
the ambient kf/arf/gf Q.
Disable segmentation where the rate per SB is very
low and overheads are likely to outweigh the benefits.
This patch reduces the -ve average metrics impact
of AQ mode 2 while allowing stronger 3 segment AQ
in some cases. Average improvement ~0.5-1.0%.
Change-Id: I5892dfcc7507c5cc6444531cc7fe17554cf8d0c7
This commit re-designs the quantization process for transform
coefficient blocks of size 4x4 to 16x16. It improves compression
performance for speed 7 by 3.85%. The SSSE3 version for the
new quantization process is included.
The average runtime of the 8x8 block quantization is reduced
from 285 cycles -> 255 cycles, i.e., over 10% faster.
Change-Id: I61278aa02efc70599b962d3314671db5b0446a50
Add a conditional compile flag for this feature. Also add a
switch to enable the encoder to use these statistics in the
second pass. Currently, the switch is turned off.
Change-Id: Ia1c858c35ec90e36f19f5cffe156b97ddaa04922
The current threshold is knid of low, and in many cases NEWMV
mode is checked but not picked as the best mode. This patch
added a speed feature to increase NEWMV threshold, so that
less partition mode checking goes to check NEWMV. This feature
is enabled for speed 6 and 7.
Rtc set borg tests showed:
1. Speed 6, overall psnr: -0.088%, ssim: -1.339%;
Average speedup on rtc set is 11.1%.
2. Speed 7, overall psnr: -0.505%, ssim: -2.320%
Average speedup on rtc set is 12.9%.
Change-Id: I953b849eeb6e0d5a1f13eacba30c14204472c5be
Encoder still uses SWITCHABLE as default via DEFAULT_INTERP_FILTER,
but does not override the default if it is not SWITCHABLE.
Change-Id: I3c0f6653bd228381a623a026c66599b0a87d01d5
When the frame is intra coded only, the encoder takes the RD
coding flow. Hence the function set_mode_info is not practically
in use. This commit removes it and the associated conditional
branches.
Change-Id: I1e42659ceb55b771ba712d1cdecacb446aa6460d
For real time speed 7, once encode breakout is on(i.e. encoding
setting --static-thresh=1), a proper encode breakout threshold
is set to speed up the encoder.
Set --static-thresh=1, RTC set borg test showed a slight overall
psnr loss of 0.162%, but ssim gain of 0.287%. The average speedup
on RTC set is 6%, and for some clips, the speedup can be 10+%.
Change-Id: Id522d9ce779ff7c699936d13d0c47083de4afb85
Before encoding a frame, calculate and store each 16x16 block's
variance of source difference between last and current frame.
Find partitioning threshold T for the frame from its variance
histogram, and then use T to make partition decisions.
Comparing with fixed 16x16 partitioning, rtc set test showed an
overall psnr gain of 3.242%, and ssim gain of 3.751%. The best
psnr gain is 8.653%.
The overall encoding speed didn't change much. It got faster for
some clips(for example, 12% speedup for vidyo1), and a little
slower for others.
Also, a minor modification was made in datarate unit test.
Change-Id: Ie290743aa3814e83607b93831b667a2a49d0932c
Bug introduced in I930dced169c9d53f8044d2754a04332138347409. If
svc.number_temporal_layers == 1 and svc.number_spatial_layers == 1, the system
attempt to do spatial SVC. It no longer does that.
Change-Id: Ie6b130a72b1eea40c547c9a64447e40695f811c5
For the primary arf in a group, if multiple arfs
are enabled and we were using arfs in the previous
group, then allow the second arf from the previous
group to be used as an additional reference.
Change-Id: Iaf41706a52f54ef21548026851cd77100d6aebda
This commit enables an adaptive transform size selection method
for speed -6. It uses largest transform size when the sse is more
than 4 times of variance, i.e., most energy is compacted in the
DC coefficient. Otherwise, use the default TX_8X8. It improves
the compression efficiency for rtc set of speed -6 by 0.8%, no
speed change observed.
Change-Id: Ie6ed1e728ff7bf88ebe940a60811361cdd19969c
This patch allows the encoder to skip the partition search for the
frame if it is an inter frame and only zero motion vectors have
been detected in the first pass. The partition size is directly
assigned according to the difference variance.
Borg tests show overall little performance changes in term of PSNR
(derf -0.027%, yt 0.152%, hd 0.078%, stdhd 0%). The worst case of
PSNR loss is -0.514% from yt. The best PSNR gain is 4.293% from yt.
The second pass encoding speedup for slideshow clips is 15%-40%.
Change-Id: I881f347d286553ee5594a9ea09ba1a61ac684045
This commit enables a fast reference motion vector search scheme.
It checks the nearest top and left neighboring blocks to decide the
most probable predicted motion vector. If it finds the two have
the same motion vectors, it then skip finding exterior range for
the second most probable motion vector, and correspondingly skips
the check for NEARMV.
The runtime of speed -5 goes down
pedestrian at 1080p 29377 ms -> 27783 ms
vidyo at 720p 11830 ms -> 10990 ms
i.e., 6%-8% speed-up.
For rtc set, the compression performance
goes down by about -1.3% for both speed -5 and -6.
Change-Id: I2a7794fa99734f739f8b30519ad4dfd511ab91a5
Bug introduced during multiple iterations on: I3831*
gf_group->arf_update_idx[] cannot currently be used
to select the arf buffer index if buffer flipping on overlays
is enabled (still currently the case when multi arf OFF).
Change-Id: I4ce9ea08f1dd03ac3ad8b3e27375a91ee1d964dc