This commit allows the encoder to skip check on compound inter
modes in the rate-distortion optimization loop, if the reference
frame bias signs are the same.
Change-Id: Ib753e6bb11cbdd338aee69dbe2b649671f75a6b0
Adds config parameter vp9_highbitdepth, to support highbitdepth profiles.
Also includes most vpx level high bit-depth functions. However
encode/decode in the highbitdepth profiles will not work until
the rest of the code is in place.
Change-Id: I34c53b253c38873611057a6cbc89a1361b8985a6
It's built based on current spatial svc code.
We only support one spatial two temporal layers at this time.
Change-Id: I1fdc8584354b910331e626bfae60473b3b701ba1
This commit skips the compound inter mode prediction check in the
rate-distortion optimization loop for ARF coding. It reduces the
runtime for certain test clips at speed 3, at no compression
performance change:
bus CIF 1000 kbps, 8260 ms -> 8090 ms, 1.8% speed-up
stockholm 720p 1000 kbps, 74453 ms -> 71826 ms, 2.9% speed-up
No visible speed-up for pedestrian area 1080p at 2000 kbps.
Change-Id: Ic68aa56837159b726563b784e2e3729e846465ad
Use unsigned int type to store the sse in the pixel domain. The
precision is sufficient to handle sse of block size up to 64x64.
The transform domain version however needs int64_t, since there is
a transfer gain applied in the forward transformation that might
cause unsigned int overflow.
Change-Id: Ifef97c38597e426262290f35341fbb093cf0a079
This commit allows encoder to skip intra coding mode test, when
the known inter residual is less than the source variance. It
reduces the runtime of speed 3 for test clips:
bus cif 1000 kbps: 8587 ms -> 8260 ms, 3.8% speed-up
pedestrian 1080p 2000 kbps: 161381 ms -> 155241 ms, 3.7% speed-up.
The compression performance is down by
derf -0.36%
stdhd -0.25%
Change-Id: I75ce1e035b4da2153cb1ac14111d1a07c05a735d
This commit extends the sse and forward transform computation flag
to support the case 64x64 blocks where there are 4 32x32 2D-DCT
blocks.
Change-Id: I86a3e805dfaa0f3abd812f590520c71aa0e40473
In the partition search, the encoder checks all possible
partitionings in the superblock's partition search tree.
This patch proposed a set of criteria for partition search
early termination, which effectively decided whether or
not to terminate the search in current branch based on the
"skippable" result of the quantized transform coefficients.
The "skippable" information was gathered during the
partition mode search, and no overhead calculations were
introduced.
This patch gives significant encoding speed gains without
sacrificing the quality.
Borg test results:
1. At speed 1,
stdhd set: psnr: +0.074%, ssim: +0.093%;
derf set: psnr: -0.024%, ssim: +0.011%;
2. At speed 2,
stdhd set: psnr: +0.033%, ssim: +0.100%;
derf set: psnr: -0.062%, ssim: +0.003%;
3. At speed 3,
stdhd set: psnr: +0.060%, ssim: +0.190%;
derf set: psnr: -0.064%, ssim: -0.002%;
4. At speed 4,
stdhd set: psnr: +0.070%, ssim: +0.143%;
derf set: psnr: -0.104%, ssim: +0.039%;
The speedup ranges from several percent to 60+%.
speed1 speed2 speed3 speed4
(1080p, 100f):
old_town_cross: 48.2% 23.9% 20.8% 16.5%
park_joy: 11.4% 17.8% 29.4% 18.2%
pedestrian_area: 10.7% 4.0% 4.2% 2.4%
(720p, 200f):
mobcal: 68.1% 36.3% 34.4% 17.7%
parkrun: 15.8% 24.2% 37.1% 16.8%
shields: 45.1% 32.8% 30.1% 9.6%
(cif, 300f)
bus: 3.7% 10.4% 14.0% 7.9%
deadline: 13.6% 14.8% 12.6% 10.9%
mobile: 5.3% 11.5% 14.7% 10.7%
Change-Id: I246c38fb952ad762ce5e365711235b605f470a66
Updates the vp9_pattern_search function to return integer one-away
neighbors' sad values, for subsequent use in speeding up the
sub-pel search. Also, removes code for the do_refine option
which is not being used currently.
Updates the integer and subpel functions to pass in a 5-element
sad list for output or input.
A new pruned sub-pel search algorithm is implemented that uses
the sad returned from the integer pel search. But it is not
deployed yet.
Change-Id: Ifa9f5ad024b5b660570366d2bd900343e1891520
This commit re-work the operation flow related to prediction
residual generation and the rate-distortion modeling. It saves one
call for model_rd_for_sb.
Change-Id: Icaf96c0ff09c903637ed5283448afe01d798195f
The value of switchable rate has been stored in a local variable.
This change skips the second call to vp9_get_switchable_rate() by
reusing the local variable.
Change-Id: Ib7d3fef7621cc4bde94c6d6e6b3a71f1fd4559f2
Check the mode and motion vector cost. If it is already above
the existing best rate-distortion cost, skip the rest check process
on this mode.
Change-Id: Ie065cebdfda2a3be3be18b8e8b43dc29aaa8c179
This commit makes the rate distortion modeling run in the unit of
maximum transform block size. No compression/speed change observed.
It is for the use of later fast forward transform purpose.
Change-Id: Ibaaedb69c765e8d0c5d5012f0ec07f36fd9f68fd
This commit addes a new strategy to reduce the search for optimal
interpolation filter type. The encoder counts and store how many each
filter type is selected and used for each of the reference frames.
A filter type that is rarely used for all three reference frames is
masked out to avoid computation.
The impact on compression is neglectible:
-0.02% on derf
+0.02% on stdhd
Encoding time is seen to reduce by 2~3%.
Change-Id: Ibafa92291b51185de40da513716222db4b230383
We can use one frame context for each layer so that we don't have
to reset the probs every frame. But we can't use prev_mi since we
may drop enhancement layers. So we have to generate a non vp9
compatible bitstream and modify it in the player.
1. We need to code all frames as invisible frame to let prev_mi
not to be used. But in the bitstream we need to code the
show_frame flag to 1 so that the publisher will know it's
supposed to be a visible frame.
2. In the player we need to change the show_frame flag to 0 for
all frames. Then add an one byte frame into the super frame
to tell the decoder which layer we want to show.
Change-Id: I75b7304cf31f0ab952f043e33c034495e88f01f3
The function was called in two places. In the first case it is replaced
with vp9_set_speed_features() call. In the second case the body of set_speed_features() is inlined.
Change-Id: If3fdf1b4168eee97677c224f69c245fe46c7f606
My fault, that was a float (not integer) which was converted to int64_t.
This reverts commit a885e1cbf0
Change-Id: Ic50708b959e1c3cb3e37da1429d334fafc3391d6
In the full-rd transform size search, we go through all transform
sizes to choose the one with best rd score. In this patch, an
early termination is added to stop the search once we see that the
smaller size won't give better rd score than the larger size. Also,
the search starts from largest transform size, then goes down to
smallest size.
A speed feature tx_size_search_breakout is added, which is turned off
at speed 0, and on for other speeds. The transform size search is
turned on at speed 1.
Borg test results:
1. At speed 1,
derf set: psnr gain: 0.618%, ssim gain: 0.377%;
stdhd set: psnr gain: 0.594%, ssim gain: 0.162%;
No noticeable speed change.
3. At speed 2,
derf set: psnr loss: 0.157%, ssim loss: 0.175%;
stdhd set: psnr loss: 0.090%, ssim loss: 0.101%;
speed gain: ~4%.
Change-Id: I22535cd2017b5e54f2a62bb6a38231aea4268b3f
This commit enables the encoder to record the location of the
center frame to generate alter reference frame. It then allows to
skip checking prediction modes of other reference frame types when
it comes to encode this frame.
The speed 3 runtime is reduced for the test sequences:
bus at CIF 1000 kbps, 9791 ms -> 9446 ms, i.e., 3.5% speed-up,
pedestrian at 1080p 2000 kbps, 184043 ms -> 175730 ms, i.e., 4.5%
speed-up.
No compression performance change observed.
Change-Id: Iacfde3bcc1445964e7a241f239bd6ea11cb94bd1
This reverts commit 5509b7fd8f
Observed a big drop in compression quality and speed for speed 1 for a 360p test clip, revert this now for investigation.
Change-Id: If69dc8d77a225b34dc7907a9472e1a7a0a22762d
Add a speed feature to give the tighter partition search
range. Before partition search, calculate the histogram
of the partition sizes of the left, above and previous
co-located blocks of the current block. If the variance of
observed partition sizes is small enough, adjust the search
range around the mean partition size, which will be tigher.
The feature is currently turned on at speed 2. Experiments on
sample youtube clips show on average the runtime is reduced
by 3-7%.
For hard stdhd clips:
park_joy_1080p @ 15000kbps: 509251 ms -> 491953 ms (3.3%)
pedestrian_area_1080p @ 2000kbps: 223941 ms -> 214226 ms (4.3%)
The PSNR performance is changed:
derf: -0.112%
yt: -0.099%
hd: -0.090%
stdhd:-0.102%
Change-Id: Ie205ec5325bf92ec5676c243e30ba9d0adca10f2
At --good and speed 3 or above for resolution less than 720p. This
disables the tests for 64x64 intra prediction modes. Encoding time
reduction is about 1%.
Change-Id: Ib396e3d1417fece416e3f0fee929b128acbb130f
The test to determine if the mode info buffers need
to be resized when the frame size changes was
incorrect, as per bug 837.
By storing the size of the allocated data structure,
a simple test determines whether to allocate more
memory when the frame size changes.
Change-Id: I1544698f2882cf958fc672485614f2f46e9719bd
In the encoder, current_video_frame is used in a couple of places to
decide encoding strategy, this commit replaces with more appropriate
variables.
Change-Id: I3d3d8d8e2ea02c489e4639b9d4c446a63e357d29
This commit moves the simplified coefficient probability model
and costing update to speed 4, and turns on chessboard pattern
mode search for sub 720p sequences. The overall coding performance
of speed 3 is improved:
derf 0.889%
stdhd 1.744%
The speed 3 runtime for test sequences are improved:
bus cif at 1000 kbps 9823 ms -> 9642 ms
pedestrian 1080p 2000 kbps 189559 ms -> 183284 ms
Change-Id: Iecbc7496a68f31fd49fb09f8dfd97c028d675a5d
This commit enables the encoder to skip NEARMV and ZEROMV if the
above and left blocks have identical reference frame, and the
current reference is different from that. It reduces the runtime
of speed 3 for test sequences:
bus cif at 1000 kbps 10064 ms -> 9823 ms
pedestrian 1080p at 2000 kbps 193078 ms -> 189559 ms
The compression performance is changed by
derf -0.085%
stdhd -0.103%
Change-Id: If304f26d42e6412152a84c3dd7b02635c38444f4
This commit allows the encoder to check the above and left neighbor
blocks' reference frames and motion vectors. If they are all
consistent, skip checking the NEARMV and ZEROMV modes. This is
enabled in speed 3. The coding performance is improved:
pedestrian area 1080p at 2000 kbps,
from 74773 b/f, 41.101 dB, 198064 ms
to 74795 b/f, 41.099 dB, 193078 ms
park joy 1080p at 15000 kbps,
from 290727 b/f, 30.640 dB, 609113 ms
to 290558 b/f, 30.630 dB, 592815 ms
Overall compression performance of speed 3 is changed
derf -0.171%
stdhd -0.168%
Change-Id: I8d47dd543a5f90d7a1c583f74035b926b6704b95
The function is called only once, right after all stats counters are
reset to 0. Therefore all the computations have zero effect on return
values. This commmit to removed those effectless code.
Change-Id: I50d27c0802547921fa36c60aa4bd92d76247f595
At speed 6 the smallest partitioning was 16x16 and biggest
intra block was 8x8, essentially disallowing all intra blocks
which produces ugly artifacts when revealing new video.
Change-Id: I364042d4c64e09be0666ade64aac94d0a1b586cf
This commit enables encoder to select fast forward transform and
quantization path according to the prediction residual sse/variance,
in the rate-distortion optimization scheme.
Change-Id: Ief9fc3844fd4107166d401970e800c6e5ce2b5fe
We had a very complicated way to initialize cpi->pass from
cfg->g_pass:
switch (cfg->g_pass) {
case VPX_RC_ONE_PASS:
oxcf->mode = ONE_PASS_GOOD;
break;
case VPX_RC_FIRST_PASS:
oxcf->mode = TWO_PASS_FIRST;
break;
case VPX_RC_LAST_PASS:
oxcf->mode = TWO_PASS_SECOND_BEST;
break;
}
cpi->pass = get_pass(oxcf->mode).
Now pass is moved to VP9EncoderConfig and initialization is simple:
switch (cfg->g_pass) {
case VPX_RC_ONE_PASS:
oxcf->pass = 0;
break;
case VPX_RC_FIRST_PASS:
oxcf->pass = 1;
break;
case VPX_RC_LAST_PASS:
oxcf->pass = 2;
break;
}
Change-Id: I8f582203a4575f5e39b071598484a8ad2b72e0d9
Eliminated instructions by using better neon instructions
and rearranging the loop.
On a Nexus 7, vpxenc (in realtime mode, speed -12)
reported a performance improvement of ~1.0%.
Change-Id: I6b1700e79318f647ea67ef25e954c308932950ec
Replaced encoder and decoder functions to get a pointer
to a reference frame with a common function, vp9_get_ref_frame,
and simplified it.
Change-Id: Icb206fcce8caace3bfd1db3dbfa318dde79043ee
in the sub_pixel_*variance* function the dst is aligned to 16 bytes and not
to 32 bytes - now load unaligned data
Change-Id: I2e0b9745543697efc56fefa32857ea10117af135
Fix the interaction between active map and reuse_inter_pred_sby. The
reuse_inter_pred_sby feature expects inter predictors to already be
built, but blocks with active map on skip this step.
Change-Id: Ibb2bf0d228f678935d82a0ede9cb0919ab7c8878
in the function sad32x32x4d and sad64x64x4d the source is aligned to 16 bytes
and not to 32 bytes - the load is now unaligned.
Change-Id: I922fdba56d0936b5cf72e4503519f185645a168c
Specifies the bit-depth, color sampling and colorspace
for intra only frames for profiles > 0
Also adds checks to ensure that profile 1 and 3 are
exclusively used for non 420 streams.
Change-Id: Icfb15fa1acccbce8f757c78fa8a2f60591360745
This commit integrates the fast transform and quantization process
into skip_recode scheme in the rate-distortion optimization loop.
Previously the fast transform and quantization process was only
enabled for non-RD coding flow.
Change-Id: Ib7db4d39b7033f1495c75897271f769799198ba8
vp9_rb_bytes_written -> vp9_wb_bytes_written
+ move limits.h from the header to the source file where it's needed
Change-Id: Ifcdc856b4d4dcc2fff555ef11f86c86a0d83dab3
This patch allows the encoder to directly split the block
in partition search, therefore skip searching NONE. It
computes a score which measures whether 16x16 motion vectors
from the first pass in the current block are consistent with
each others. If they are inconsistent and we have enough Q
to encode, split the block directly, and skip searching NONE.
This feature is under flag CONFIG_FP_MB_STATS. In speed 2,
it further gives a speedup of 3-8% on sample yt clips as
compared to the previous version under the same flag. Overall,
the features under the flag will give 7-15% on typical yt
clips at up to 6000kbps data rate. The speedup at very high
data rate is not significant.
For hard stdhd clips:
park_joy_1080p @ 15000kbps: 504541ms -> 506293ms (-0.35%)
pedestrian_area_1080p @ 2000kbps: 326610ms -> 290090ms (+11.2%)
The compression performance using the features under the flag:
derf: -0.068%
yt: -0.189%
hd: -0.318%
stdhd:-0.183%
To use the feature, set CONFIG_FP_MB_STATS and turn on
cpi->use_fp_mb_stats.
Change-Id: Iad58a2966515c8861aa9eb211565b1864048d47f