Increases these parameters.
There is a small efficiency gain.
Change-Id: Ie5f0ddb39c907d335e0dafa5eb112365a81f4542
derfraw300: +0.091%
stdhdraw250: +0.238%
The intra mode distortion adjustment for skip_encode feature was
broken in the refactoring cc91851. This commit fixes it and tunes
the distortion models used therein.
Change-Id: I0d676e82f8e855536a90cf9b3e3fdefafcd886c6
snprintf is not supported by MSVC, the commit replace it with the msvc
variant _snprintf to enable build.
Change-Id: I686943a78c289bae6b486a5e75effad5f86c24de
Use b_mode_info to store the inter prediction mode of sub8x8 block,
in replacement of the use of partition_info. Remove redundant buffer
update for partition_info. For bus_cif at 2000 kbps, this seem to make
speed 0 about 1% faster.
Change-Id: Id1b3be45e75a24fb4b42335ac480c23e440978f6
When all coefficients are zeros, skip the corresponding 1-D inverse
transform. This practice has been used in the SSE2 implementation of
inverse 32x32 DCT. This commit imports this algorithm into the C code.
Change-Id: I0f58bfcb183a569fab85d524d5d9cf8ae8653f86
We already have itxm_add member in MACROBLOCKD structure. Both
inv_txm4x4_1_add and inv_txm4x4_add are just its special cases for
different eob values. But eob logic is already implemented in
vp9_iwht4x4_add and vp9_idct4x4_add (that's why also removing
inverse_transform_b_4x4_add).
Change-Id: I80bec9b6f7d40c5e5033c613faca5c819c3e6326
For CpuUsed 1 & 2, this commit allow to skip retangular partition check
when NONE is better than SPLIT. It also changed to allow such logic
on alt ref frame coding rather than use square partition all them. The
change has gain compressio about .3% on yt and ythd for both 1&2, It
helped .6% compression on cif and stdhd for both CpuUsed 1&2.
Change-Id: I814b653baf89f59acd20e042629a12938a1bd4e5
Now we have entropy code separate from scan/iscan code. The next step
in future is to move iscan code from common part to the encoder.
Change-Id: Id9732f7d80aec00af35c1d58d1137c4c96c91451
A new set of MSVC warnings were introduced by change
I3f36d3f7cd8d15195a6e2fafd1777cdaf9ecb847
In particular MSVC does not like:-
typedef const int16_t subpel_kernel[SUBPEL_TAPS];
struct subpix_fn_table {
const subpel_kernel *filter_x;
const subpel_kernel *filter_y;
};
causes new warning in MSVC.
warning C4114: same type qualifier used more than once
Change-Id: Iae596fd13aadf36169faf00c68eabe9a32a9b156
This commit allows sub8x8 intra modes test in the rate-distortion
loop for hd sequences in speed 1 and 2.
For sequence y90n of hd set at 8000 kbps, speed 2 runtime goes
from 207s to 210s. For ped_1080p at 3000 kbps, speed 2 runtim goes
from 336s to 337s. Both are running with 300 frames.
This improves compression performance by 0.24% for stdhd and 0.32%
for hd.
Change-Id: I173ca38a6411565ae6cfadd184c42b2070c5de1f
The idea is to have the following names for each transform size:
vp9_idct4x4_add
vp9_idct4x4_1_add
vp9_idct4x4_10_add
vp9_idct4x4_16_add
vp9_idct8x8_add
vp9_idct8x8_1_add
vp9_idct8x8_10_add
vp9_idct8x8_64_add
etc for 16x16, 32x32
The actual list of renames in this patch:
vp9_idct_add_lossless -> vp9_iwht4x4_add
vp9_short_iwalsh4x4_add -> vp9_iwht4x4_16_add
vp9_short_iwalsh4x4_1_add -> vp9_iwht4x4_1_add
vp9_idct_add -> vp9_idct4x4_add
vp9_short_idct4x4_add -> vp9_idct4x4_16_add
vp9_short_idct4x4_1_add -> vp9_idct4x4_1_add
Change-Id: I6f43f7437c68dd30cdd05d72e213765578ed30b1
Speed 4 still does not give a big gain over speed 3.
This just cleans it up a little from the last patch and comments
out features that do not seem to be giving much benefit.
Change-Id: I5f366e6160e1dbe5dc45cf5eb90cc02712baa1b6
Allow selective masking of individual split modes rather than
just a single on / off flag.
For speed 2 recovers the large speed loss seen for some derf
clips in change Ie6bdfa0a370148dd60bd800961077f7e97e67dd4
and a small quality gain.
For speed 1 10 % speed increase observed locally on some derf clips
for minimal quality change.
Change-Id: If86191087b93cbc05351c26c60c7933e2149e485
Moving INTERPOLATIONFILTERTYPE enum and subpix_fn_table struct to
vp9_filter.h. Adding convenient typedef for subpel kernels.
Function vp9_setup_interp_filters() besides setting xd->subpix.filter_x &
xd->subpix.filter_y has a side effect of also setting scale factors. This
is not required inside decode_modes_b() because scale factors have been
already set by set_ref() calls. That's why replacing
vp9_setup_interp_filters() call with newly created vp9_get_filter_kernel()
call. The behavior of vp9_setup_interp_filters() is unchanged (it
is used from the encoder).
Change-Id: I3f36d3f7cd8d15195a6e2fafd1777cdaf9ecb847
This commit removes the redundant second reference frame check in
the rate-distortion optimization loop for sub8x8 blocks.
Change-Id: I13a57a6f624c4a9bcef02ff2a867fa30d8b44a93
This commit defines b_mode_info as a struct type. This will allow
us to further remove the use of PARTITION_INFO in the encoding process.
Change-Id: I975b0f7d557b5e0f66545a61b472def76b671cce
This commit separates the rate-distortion optimization loop of
superblocks from that of sub8x8 blocks. This allows better design
rate-distortion optimization search loop for each setting. It also
removes the use of SPLITMV and I4X4_PRED therein.
No performance change in speed 0 settings. For bus@CIF at 2000kbps,
the speed 1 runtime goes from 48009ms to 43894ms (about 10% faster).
The overall compression performance on derf changed by -0.021%.
Speed 2 runtime goes from 27114ms to 28700ms (6% slower), while the
overall coding efficiency goes up by 1.629% for derf, 1.236% for yt.
Change-Id: Ie6bdfa0a370148dd60bd800961077f7e97e67dd4
In subpixel filters, prefetched source data, unrolled loops,
and interleaved instructions.
In HORIZx4, integrated the idea in Scott's CL (commit:
d22a504d11), which was suggested by
Erik/Tamar from Intel. Further tweaking was done to combine row 0,
2, and row 1, 3 in registers to do more 2-row-in-1 operations until
the last add.
Test showed a ~2% decoder speedup.
Change-Id: Ib53d04ede8166c38c3dc744da8c6f737ce26a0e3
Substantial reworking of the speed vs quality trade offs for
speed 1 and 2.
In this patch I am attempting to freeze the "quality" meaning of
speeds 1 and 2 relative to speed 0 so that in future we can
better evaluate progress.
I am targeting :
Speed 1 quality ~-5% vs speed 0.
Speed 2 quality ~-10% vs speed 0
It is inevitable that quality will still fluctuate a little as we adjust
settings and add new features, but we will attempt to keep as
close as possible to these values. Above speed 2 things will remain
a bit more fluid for now.
In this patch speed 1 is approximately 4-5x as fast as speed 0. This
is similar to before but the quality hit is a lot less. Likewise speed 2
is approximately 2x as fast as speed 1 but is similar in quality to the
previous speed 1 configuration.
Also slight change to behavior of FLAG_EARLY_TERMINATE to insure
all reference frames get at least one rd test. Important for very low
variance regions.
WIP :- Added a new speed level with old speed 4 becoming speed 5.
Speed 3 and 4 tradeoffs still WIP
Change-Id: Ic7a38dd7b5b63ab1501f9352411972f480ac6264
This commit causes use last partition to consider whether a 64x64 has
motion that might make a new partitioning worth while.
Change-Id: I3a57bedef4f3cd961fadbfa96651c206fa36da4a
Simplify the k_cvtlo_epi16 and k_cvthi_epi16 to only two
instructions. Then inlined them.
quoting from intel MMX_App_Compute_16bit_Vector.pdf
"The PMADDWD instruction multiplies four
pairs of 16-bit numbers and produces partial sums of the results
and can do so once per clock (with a three-clock latency)."
so I am assuming that there will be three clock overhead after the
last _mm_madd_pi16 command.
Even with the overhead the number of clocks in general should be
smaller. I am not sure though becasue I could not find information
about number of clocks required for instructions in k_cvtlo_epi16
and k_cvthi_epi16. I will run a test and compare the execution time.
Change-Id: Ieda4aa338f69ad3dd196ac6e7892da3cf1b47ea7
Moving functions from vp9_idct_blk to vp9_idct because these functions are
used from both encoder and decoder. Removing duplicated code from
vp9_encodemb.c and reusing existing functions.
Change-Id: Ia0a6782f8c4c409efb891651b871dd4bf22d5fe8
The codec should effectively run with motion vector of range (-2048, 2047)
in full pixels, for sequences of 1080p and below. Add assertions to clarify
this behavior.
Change-Id: Ia0cac28249f587d8f8882205228fa480263ab313
Moving out decode_tokens function calls and adding decode_blocks boolean
variable. We only have to decode if eobtotal > 0, i.e. we have at least one
non-zero coefficient. Also inlining and remove vp9_set_pred_flag_mbskip
function.
Change-Id: I7be38b12ee8206faf0beea2bbf4d52be42575b03
Interleaved the instructions, reduced register dependency, and
prefetched the source data. This improved the decoder speed
by 0.6% - 2%.
Change-Id: I568067aa0c629b2e58219326899c82aedf7eccca
byte version of ronalds d153 ssse3 optimizations for
4x4 and 8x8
(commit: fc91a2a112238a1aee568f3b840585de4e928fca)
Change-Id: Iec4426032311483f615fd9e0dceba3ee85ddebd7
Make encoder skip rectangular partition check in speed 1 and above,
when early termination was triggered in partition split.
Thanks Guillaume (gmartres@) for catching this issue.
This change makes bus_cif at 2000kbps speed 1 runtime goes down from
25612ms to 23438ms (about 9% speed-up), at the expense of -0.235%
performance down.
Change-Id: I98613fad081a261d30d5fa206f934ca70601c180
We don't need these functions anymore. The only one which was actually
used is vp9_add_constant_residual_32x32. Addition of
vp9_short_idct32x32_1_add eliminates this single usage. SSE2 optimized
version of vp9_short_idct32x32_1_add will be added in the next patch set,
right now it is only C implementation. Now we have all idct functions
implemented in a consistent manner.
Change-Id: I63df79a13cf62aa2c9360a7a26933c100f9ebda3
The code now takes into account temporal and spatial
information to determine the partition size range, but the
frequency counts have been removed.
The net effect is similar in quality but about 10% faster.
Change-Id: I39a513fb79cec9177b73b2a7218f0da70963ae95
This patch deletes the variance based speed three partitioning.
Speed 3 now uses the same partitioning method as speed 2
but with some stricter conditions.
The speed and quality are now somewhere between speeds 2 and 4
whereas before it was worse in both than speed 4.
Change-Id: Ia142e7007299d79db3ceee6ca8670540db6f7a41
apparently we are going to have trouble completely removing lint issue in this file.
It needs a bit more work. We need to include vpx_config.h to know whether
we need to have multi threading . and that means vpx_config.h has to come
before the system headers. ( a violation )
Change-Id: I023feeab1bf5643b79dccc3b80a4a9ad42689e7b
Signed-off-by: Jim Bankoski <jimbankoski@google.com>
Both vp9_init_mbmode_probs() and vp9_zero(cm->ref_frame_sign_bias) are
called inside vp9_setup_past_independence() which called in any case for
encoder/decoder after VP9_COMMON struct creation.
Change-Id: I3724d1a4fb8060101ff0290dd6a158f0b5c57bb4
Replace current code which corrupts the stack by
duplicate of vp8 code to save and restore neon
registers.
Change-Id: Ibb0220b9aa985d10533befa0a455ebce57a2891a
Some small changes to the quantizer mapping functions.
Also includes some cleanups.
Change-Id: I9dea29b24015f6e6697012a0e4d8983049d8e5c7
Results:
derfraw300: +0.106%
stdhdraw250: +0.139%
Don't divide RDMULT and RDDIV by 100 when RDMULT > 1000. This was
probably done to avoid overflow when the rd cost was stored in a 32 bits
integer but this is not the case anymore. This change will make it easier
to support multiple quantizers per frame.
derf compression gain at speed 0: 0.037%
Change-Id: Ibeeb9b7cfa1a132a7af41bc90fc07a3bba0857f6
- full ASM version, no more C gateway file.
- integrate combine-add with last step of 2nd pass.
- remove a few push/pop pairs.
- some instruction reordering to hide latency.
Change-Id: Ic9d9933c908b65d1bf7ba8fd47b524cda808c9c6
Both first pass and mbgraph search use block size 16x16 for motion
estimation. This commit put a limit of motion vector range. The
effective range allows the entire 16x16 with required subpel
interpolation input to be completely outside image border, but
not any further away from image border.
Change-Id: Id70a5ed08be49e70959f064859d72adc7d775d08
INT64_MAX may be assigned as RDCOST when RDCSOST computation is skipped
for speed, this commit to prevent INT64_MAX from being used as real
RDCOST in transform size decision.
Change-Id: I89a945134191bbdea1f1431ade70424ac079eaac
After change of MI context storage , mi_8x8[] pointer may be null for
a block outside of image border. The commit changes to access the data
only after validation of mi_row and mi_col.
Change-Id: I039c4eb486a228ea9d8e5f35ab9ae6717d718bf3
The probability model used to code prediction mode is conditioned
on the immediate above and left 8x8 blocks' prediction modes. When
the above/left block is coded in sub8x8 mode, we use the prediction
mode of the bottom-right sub8x8 block as the reference to generate
the context.
This commit moves the update of mbmi.mode out of the sub8x8 decoding
loop, hence removing redundant update steps and keeping the bottom-
right block's mode for the decoding process of next blocks.
Change-Id: I1e8d749684d201c1a1151697621efa5d569218b6
39c7b01d accidently reverted the row/col initialization, which broke
mv clamps, which is dependent on the sites for valid motion vector
range. This commit fixed the issue.
Change-Id: Ibcce0226e0360b1ef483fe760b2e33f1af4bf494
This commit enables forcing all coefficients zero per transformed
block, when its rate-distortion cost is lower than regular coeff
quantization.
The overall performance improvement (including its parent patch on
calculating rd cost per transformed block) at speed 1:
derf: 0.298%
yt: 0.452%
hd: 0.741%
stdhd: 0.006%
Change-Id: I66005fe0fd7af192c3eba32e02fd6d77952accb5
Adds modeled functions to decide the qp for altref frames in constant q
mode similar to other functions in use in bitrate mode.
Also turns on the constrained quality mode (end-usage=2) option which
was turned off before. Basic testing shows the mode works in principle,
to cap bitrate to the target-bitrate specified, while allowing lower
bitrate depending on the cq-level specified. The mode will need to be
improved over time.
Results for constant quality vs bitrate control mode:
derfraw300/fullderfraw: +3.0% at constant quality over bitrate control.
fullstdhdraw: +4.341%
stdhdraw250: +5.361%
Change-Id: If5027c9ec66c8e88d33e47062c6cb84a07b1cda9
This commit makes the rate-distortion optimization loop evaluate
the rd costs of regular quantization and all zero coeffs, per
transformed block. It improves speed 1 compression performance:
derf: 0.245%
yt: 0.515%
For a large partition that consists multiple transformed blocks,
this allows more flexibility to selectively force a portion of
them coded as all zero coeffs, as well be continued in the next
patches.
Change-Id: I211518be4179747b57375696f017d1160cc91851
The sub8x8 blocks has its own motion vector reference scheme. The
mv_pred is only used blocks of sizes 8x8 and above, to find the
starting point for motion search.
This change does not change any coding behavior. It makes the
encoding process slightly faster. (0.5% speed-up for local test on
speed 1.)
Change-Id: I746ee6ef0eac19aa3621be014afa12be8d82cbb9
The fake token EOSB may cause invaild memory read in pack token, this
commit reworked the loop to avoid such invalid read.
Change-Id: I37fdfce869b44a7f90003f82a02f84c45472a457
Current x86inc.asm didn't handle 32bit PIC build properly.
TEXTRELs were seen in the library built. The PIC macros from
libvpx's x86_abi_support.asm was used to fix this problem.
The assembly code was modified to use the macros.
Notes: We need this fix in for decoder building. Functions in
encoder will be fixed later.
Change-Id: Ifa548d37b1d0bc7d0528db75009cc18cd5eb1838
This commit cleans up the second reference check in the
rate-distortion optimization loop of sub8x8 blocks.
Change-Id: Ife68feaa4cddbfad2878c9b44d3012788d634f97
The sub8x8 check can be directly inferred from block_idx, hence
removed from the arguments if get_sub_block_mv.
Change-Id: Ib766d57e81248fb92df0f6d9b163e6c77b933ccd
The commit added reset of pred_mv at the beginning of each SB64x64
partition mv search, also limited the usage of pred_mv only when
search on the largest partition is already done. This is to fix
a crash at speed 1/2 encoder where an invalid mv is used in mv
search.
Change-Id: I39010177da76d054e3c90b7899a44feb2e3a5b1b
This is incompatible with most toolchains other than gcc.
Revert "Deleted #include <inttypes.h>"
This reverts commit 4d018be950.
This reverts commit d22a504d11.
Change-Id: I1751dc6831f4395ee064e6748281418e967e1dcf
This commit enables adaptive constraint on motion search range for
smaller partitions, given the motion vectors of collocated larger
partition as a candidate initial search point.
It makes speed 0 runtime of bus at CIF and 2000 kbps goes from
167s down to 162s (3% speed-up), at 0.01dB performance gains. In
the settings of speed 1, this makes the runtime goes from 33687 ms
to 32142 ms (4.5% speed-up), at 0.03dB performance gains.
Compression performance wise, it gains at speed 1:
derf 0.118%
yt 0.237%
hd 0.203%
stdhd 0.438%
Change-Id: Ic8b34c67810d9504a9579bef2825d3fa54b69454
Mis-merge of the following change managed to break mode order
and delete two mode options (new alt ref and near alt ref)
It also created a situation where we could test two undefined
modes off the end of the VP9_mode_order[] data structure.
"clang warnings : remove split and i4x4_pred fake modes"
"Change Id: I8ef3c*"
Initial testing on Akiyo at speed 2.
101.35 44.567 44.447 improves to
96.82 44.915 44.815
Approx 0.3-0.4db gain and 2.5% size reduction
Change-Id: Icff813e7c0778d140ad4f0eea18cf1ed203c4e34
Removes this speed feature since it is very slow and unlikely
to be used in practice. This cleanup removes a bunch of unnecessary
complications in the outer encode loop.
Change-Id: I3c66ef1ca924fbfad7dadff297c9e7f652d308a1
Reformatted version of a patch submitted by Erik/Tamar
from Intel. For the test clips used, the decoder
performance improved by ~2%.
Change-Id: Ifbc37ac6311bca9ff1cfefe3f2e9b7f13a4a511b
Propose some changes to the speed 2 settings to improve quality.
In particular, turns off the adjust_thresholds_by_speed feature
which improves results by 6%. Also removes the code for
adjust_thresholds_by_speed since it conflicts with the adaptive
rd thresh feature.
Overall, with this change speed 2 is -15.2% from speed 0 settings,
on derf, which is significantly better than -21.6% down before.
Change-Id: I6e90a563470979eb0c258ec32d6183ed7ce9a505
mode_info_context was stored as a grid of MODE_INFO structs.
The grid now constists of pointers to MODE_INFO structs. The
MODE_INFO structs are now stored as a stream (decoder only),
eliminating unnecessary copies and is a little more cache
friendly.
Change-Id: I031d376284c6eb98a38ad5595b797f048a6cfc0d
The c code implementation of 32x32 quantization does the zbin check
of all coefficients prior to the quant/dequant loop, hence removing
the redundant zbin check inside the loop. This only affects the
c code version. SSSE3 version does not separate the zbin check out.
Change-Id: Ic197a7d61d0b25fcac3cc092987651378cb56e4e
If the current obtained distortion is very small, which happens
for static image case, we pick the current partition type without
further split checking.
This won't affect regular videos. For static videos, we got 10%~12%
encoding speed gain. PSNR was better for some clips, and worse for
others. Overall it was even.
Change-Id: If787a57bedf46fc595ca4f5ded2b0c0a69e9fdef
Thank Paul for the suggestions. While turning on static-thresh
for static-image videos, a big jump on bitrate was seen. In this
patch, we detected static frames in the video using first-pass
stats. For different cases, disable encode breakout or reduce
encode breakout threshold to limit the skipping.
More modification need be done to break incorrect partition
picking pattern for static frames while skipping happens.
Change-Id: Ia25f47041af0f04e229c70a0185e12b0ffa6047f
A previous speed feature skipped modes not used in earlier
partitions but this not longer worked as intended following
changes to the partition coding order and in conjunction
with some other speed features (Especially speed 2 and above).
This modified mode skip feature sets a mask after the first X
modes have been tested in each partition depending on the
reference frame of the current best case.
This patch also makes some changes to the order modes are
tested to fit better with this skip functionality.
Initial testing suggests speed and rd hit count improvements
of up to 20% at speed 1. Quality results. (derf -1.9%, std hd +0.23%).
Change-Id: Idd8efa656cbc0c28f06d09690984c1f18b1115e1
Sample app: vp9_spatial_scalable_encoder
vpx_codec_control extensions:
VP9E_SET_SVC
VP9E_SET_WIDTH, VP9E_SET_HEIGHT, VP9E_SET_LAYER
VP9E_SET_MIN_Q, VP9E_SET_MAX_Q
expanded buffer size for vp9_convolve
modified setting of initial width in vp9_onyx_if.c so that layer size
can be set prior to initial encode
Default number of layers set to 3 (VPX_SS_DEFAULT_LAYERS)
Number of layers set explicitly in vpx_codec_enc_cfg.ss_number_layers
Change-Id: I2c7a6fe6d665113671337032f7ad032430ac4197
The commit changes the border pixel extension from 160 pixel each side
to what is necessary in arnr filter or motion estimation portion, i.e.
16 pixel on top and left side. For right or bottom side, the extension
is changed to either round up image size to multiple of 64 or at least
16 pixels.
Change-Id: Ic05e19b94368c1ab4df568723aae5734e6c3d2c5
The 16x16 transform unit test suggested that the peak coefficient
value can reach 32639. This could cause potential overflow issue
in the SSSE3 implmentation of 16x16 block quantization. This commit
fixes this issue by replacing addition with saturated addition.
Change-Id: I6d5bb7c5faad4a927be53292324bd2728690717e
Adds a new end-usage option for constant quality encoding in vpx. This
first version implemented for VP9, encodes all regular inter frames
using the quality specified in the --cq-level= option, while encoding
all key frames and golden/altref frames at a quality better than that.
The current performance on derfraw300 is +0.910% up from bitrate control,
but achieved without multiple recode loops per frame.
The decision for qp for each altref/golden/key frame will be improved
in subsequent patches based on better use of stats from the first pass.
Further, the qp for regular inter frames may also be varied around the
provided cq-level.
Change-Id: I6c4a2a68563679d60e0616ebcb11698578615fb3
mode_info_context was stored as a grid of MODE_INFO structs.
The grid now constists of a pointer to a MODE_INFO struct and
a "in the image" flag. The MODE_INFO structs are now stored
as a stream, eliminating unnecessary copies and is a little
more cache friendly.
For the test clips used, the decoder performance improved
by ~4.3% (1080p) and ~9.7% (720p).
Patch Set 2: Re-encoded clips with latest. Now ~1.7% (1080p)
and 5.9% (720p).
Change-Id: I846f29e88610fce2523ca697a9a9ef2a182e9256
The 32x32 forward transform can potentially reach peak coefficient
value close to 32700, while the rounding factor can go upto 610.
This could cause overflow issue in the SSSE3 implementation of 32x32
quantization process.
This commit resolves this issue by replacing the addition operations
with saturated addition operations in 32x32 block quantization.
Change-Id: Id6b98996458e16c5b6241338ca113c332bef6e70
The segment feature SEG_LVL_SKIP requires the prediction unit size
to be at least BLOCK_8X8. This commit makes the requirement to be
explicit. This is to prevent future encoder implementations from
making wrong choices.
Change-Id: I0127f0bd4c66e130b81f0cb0a8d3dbfe3b2da5c2
Moves counting of mv branches to where we have a new mv, instead of after
the whole frame is summed.
Change-Id: I945d9f6d9199ba2443fe816c92d5849340d17bbd
Speed 4 fixed partition size. Use fixed size unless it does not
fit inside image, in which case use the largest size that does.
Change-Id: I250f7a80506750dd82ab355721624a1344247223
This commit fixed the potential overflow issue in the SSE2
implementation of 32x32 forward DCT. It resolved the corrupted
coded frames in the border of scenes.
Change-Id: If87eef2d46209269f74ef27e7295b6707fbf56f9
While static-thresh is on, we only need to transmit skip
flag if skip = 1. The cost of skip bit is added to the
total rate cost.
Change-Id: I64e73e482bc297eba22907026298a15fa8cc3920
- Intermediate height was not correct i.e. when block size is 4 and
y_step_q4 is 6. In this case intermediate height was
(4*6) >> 4 = 1 and vertical interpolation needs two source pixels
plus 7 extra pixels for taps.
- Also if the current output block is 16x16 and we are using 4x upscaling
we need only 12 rows after horizontal filtering instead of 16.
Patch Set 2: Intermediate_height updated after CL 66723
"Fix bug in convolution functions (filter selection)"
Change-Id: I5a1a1bc2ac9d5edb3a6e0818de618bf318fdd589
Added some code to output normalized rd hit count stats.
In effect this approximates to the average number of rd
operations/tests per pixel for the sequence.
The results are not quite accurate and I have not bothered
to account for partial SB64s at frame edges and for key frames
However they do give some idea of the number of modes /
prediction methods being tested for each pixel across the
different partition sizes. This indicates how much scope their
is for further gains either by reducing the number of partitions
examined or the modes per partition through heuristics.
Patch 3 moved place where count incremented so partial rd
tests that are aborted with INT_MAX return are also counted.
Example numbers for first 50 frames of Akiyo.
Speed 0 ~84.4 rd operations / pixel
Speed 1 ~28.8
Speed 2 ~11.9
Change-Id: Ib956e787e12f7fa8b12d3a1a2f6cda19a65a6cb8
The 32x32 quantization process can potentially have the intermediate
stacks over 16-bit range, thereby causing enc/dec mismatch. This commit
fixes this overflow issue in the SSSE3 implementation, as well as the
prototype, of 32x32 quantization.
This fixes issue 607 from webm@googlecode.
Change-Id: I85635e6ca236b90c3dcfc40d449215c7b9caa806
The two arrays are typically initialized to INT64_MAX, if they are not
filled with valid values before the addition, the values can overflow
and lead to wrong results.
Change-Id: I515de22cf3e8f55af4b74bdb2c8eb821a02d3059
This patch is a reformatted version of optimizations done by
engineers at Intel (Erik/Tamar) who have been providing
performance feedback for VP9. For the test clips used (720p, 1080p),
up to 1.2% performance improvement was seen.
Change-Id: Ic1a7149098740079d5453b564da6fbfdd0b2f3d2
Switching from mi_{width, height}_log2 and b_{width, height}_log2 to
num_8x8_blocks_{wide, high} and num_4x4_blocks_{wide, high}. Removing
redundant code, adding const.
Change-Id: Iaab2207590fd24d0b76999071778d1395dc5cd5d
Incorporates a speed feature for fast forward updates of
coefficients. This feature takes 3 values:
0 - use standard 2-loop version
1 - use a 1-loop version
2 - use a 1-loop version with reduced updates
Results: derfraw300 +0.007% (on speed 0) at feature value = 1
-0.160% (on speed 0) at feature value = 2
There is substantial speed up at speeds 2 and above for low
resolution sequences where the entropy updates are a big part
of the overall computations.
Change-Id: Ie96fc50777088a5bd441288bca6111e43d03bcae
This commit resolved a mis-alignment issue in compound inter-inter
prediction of sub8x8. This patch follows solution from dkovalev@.
Change-Id: I3cc0cf7e55b84110e0c42ef4b2e6ca7ac3f8f932
