Fix to avoid getting stuck at very low Q even
though content is changing, which can happen for --min-q=0.
Fix is to more aggressively increase active_worst_quality
when detecting significant rate_deviation at very low Q.
Change will only affect 1 pass VBR for --min-q < 4, so no
change in ytlive metrics for --min-q >= 4.
Change-Id: I4dd77dd7c08a30a4390da0ff2c8bda6fccfa76d7
Code cleanup: merged two functions that were doing postencode
update for cylic refresh, remove some unused code and fix comments.
No change in behavior.
Change-Id: I9be0d7e346d34dec29bf4e5bb380a7bf81c8480a
Refactor to split the 1 passs source sad computation into scene
detection (currently used for VBR and screen-content mode), and
superblock based source sad computation (used in non-rd CBR mode).
This allows the source sad computation for CBR mode to be
multi-threaded.
No change in compression.
Change-Id: I112f2918613ccbd37c1771d852606d3af18c1388
Make the source_sad feature work properly for cases of VBR or
screen_content with SVC.
Added unittest for SVC with screen-content on.
Change-Id: Iba5254fd8833fb11da521e00cc1317ec81d3f89b
For each superblock, keep track of how far from current frame
was the last significant content change, and use that (along
with GF distance), to turnoff GF search in non-rd pickmode.
Only enabled for speed >= 8.
avgPNSR on RTC/RTC_derf down by ~0.9/1.2.
Speedup on mac: ~3-5%.
Speedup on arm: 3.6% for VGA and 4.4% for HD.
Change-Id: Ic3f3d6a2af650aca6ba0064d2b1db8d48c035ac7
Fix the update of the denoiser buffer when the base
spatial layer is a key frame. And allow for better/lower
QP on high spatial layers when their base layer is key frame.
Change-Id: I96b2426f1eaa43b8b8d4c31a68b0c6d68c3024a2
Increase the variance partition thresholds for superblocks that
have low sum-diff (from source analysis prior to encoding frame).
Use it for now only for speed >= 7 or for denoising on.
Small change on metrics for rtc set: less than ~0.1 avgPNSR decrease
on RTC set, for both speed 7 and 8.
Change-Id: I38325046ebd5f371f51d6e91233d68ff73561af1
broken since:
c3f095c8b Merge "Fix to avoid abrupt relaxation of max qindex in recode path"
5f21aba4b Fix to avoid abrupt relaxation of max qindex in recode path
the original change pre-dated the addition of .clang-format
Change-Id: If5e399d9a805bcad9147360b13b36fbc8c560a7c
VBR method that allows a wider Q range for the first normal frame
in each ARF group and then centers the min - max range for the rest of
the arf group on the chosen Q value for that first frame.
This allows for quite rapid adjustment of the active Q range even if the
initial estimate is poor.
In some cases where the ARF frames themselves are tending to
undershoot but the normal frames are overshooting this can still give
net undershoot. This can be corrected by allowing a larger Q delta for
arf frames but is usually is a sign that the allocation to the arfs was to
high.
Change-Id: Icec87758925d8f7aeb2dca29aac0ff9496237469
Only for speed >= 7, and affects skipping of intra modes.
Threshold is set low for now, needs to be tuned.
Small/no difference in metrics on rtc clips.
Change-Id: If9bdbd43f08d1f80407cdd2e9e5e96780dcd2424
The fix relaxes the max qindex based on the data from previous loop of
coding if output frame size is greater than maximum frame size allowed
Change-Id: Iac1f63ec67559d68766e090a7cbb80b812b2560f
If enabled will compute source_sad for every superblock on every frame,
prior to encoding. Off by default, only on for speed=8 when
copy_partition is set.
Change-Id: Iab7903180a23dad369135e8234b7f896f20e1231
When aq=3 mode is on and the gf_cbr_boost is set: make sure golden frame
is always refreshed, and don't incorporate segement cost in qp setting
on the boosted golden frame.
Better performance on RTC set with gf_cbr_boost on,
for example with gf_cbr_boost=50, gains from ~0.5-3%.
Change-Id: Ie811f5e4d444ff3320bd6e2c1745b2c4c09a8460
Avoid the qp-clamping on gf/alt frame if gf_cbr_boost_pct is set.
Change only affect CBR mode when gf_cbr_boost_pct is set.
Change-Id: I0655ed4f2b047c8ed1ed33a070c17960ad776704
Increase the boost threshold below which GOLDEN update will use same
rate correction factor as INTER_NORMAL.
Improves performance when gf_cbr_boost_pct is set (between 0 and 100)
in CBR mode.
Change-Id: I9f54cc18664786a100b13a416b7137ae03bd0cab
The source sad could be used to copy the partition without going into
choose_partitioning function to speed up vp9 encoding. Computing source
sad takes little time. Speed test on Android and Linux shows little
encoding time gain (less than 1.4%).
Turned off for now since partition copy is turned off.
Change-Id: I61c9d5b8f22329760cb29a4ee30a7f9c232ce8d3
The flag USE_ALTREF_FOR_ONE_PASS allows for alt-ref lookahead
in 1 pass vbr (from https://chromium-review.googlesource.com/#/c/365498).
This change is to make sure this macro flag only has effect if
the config flag cpi->oxcf.enable_auto_altef is also on.
No change in ytlive encoding, as USE_ALTREF_FOR_ONE_PASS is not
yet enabled.
Change-Id: I1a69681e4a15c5244581a3dab4587fca08f02e0f
For 1 pass vbr real-time mode:
Allow for the usage of alt-ref frame when non-zero lag-in-frames is used.
Use non-filtered alt-ref, and select usage based on fast scene/content
analysis/detection within the lag of frames.
Positive gains on ytlive set: overall avgPSNR ~3-4%.
Several clips are up between 5-14%, a few clips are neutral/small change.
Current speed decrease is about ~5-10%.
Use the flag USE_ALTREF_FOR_ONE_PASS to enable this feature
(off by default for now).
Change-Id: I802d2bf3d44f9cf01f6d15c76be9c90192314769
Put limit on gf interval based on lag, and allow
for the adjustment on next gf group also on key frame.
Small/neutral change on ytlive metrics.
Change only affects 1 pass vbr real-time mode.
Change-Id: I339c8f4398848698b6e10fe9482c52ca661b94a5
Remove the experiment LIMIT_QP_ONEPASS_VBR_LAG, as its
not currently used and no plan to use in near future.
Change-Id: Ib069f8d7225195be04b765d0ab477510dfba6a3b
Added casts to remove warnings:
BUG=webm:1274
In regards to the safety of these casts they are of two types:-
- Normalized bits per (16x16) MB stored in a 32 bit int (This is safe as bits
per MB even with << 9 normalization cant overflow 32 bits. Even raw 12
bits hdr source even would only be 29 bits :- (4+4+12+9) and the encoder
imposes much stricter limits than this on max bit rate.
- Cast as part of variance calculations. There is an internal cast up to 64 bit
for the Sum X Sum calculation, but after normalization dividing by the number
of points the result will always be <= the SSE value.
Change-Id: I4e700236ed83d6b2b1955e92e84c3b1978b9eaa0
Using a tighter resize constraint on undershoot seems to help
results (especially SSIM) as significant undershoot on a frame
seems to have more of a damaging impact than overshoot.
This patch has been tuned so that in local testing using the
derf set it is encode speed neutral for speed setting 2.
Average quality result for speed 2 (psnr,ssim) were as follows:-
lowres 0.039, 0.453
midres 0.249, 0.853
hdres 0.159, 0.659
NetFlix -0.241, 0.360
Change-Id: Ie8d3a0d7d6f7ea89d9965d1821be17f8bda85062
Increase the minimum distance.
Reduces the overshoot somewhat on some clips,
small gain in avgPSNR (~0.1%) on ytlive set.
Change-Id: Id5ddde20c2907dbdb536e79542eff775019c142b
Allow usage of lookahead for VBR in real-time mode, for 1 pass vbr.
Current usage is for fast checking of future scene cuts/changes,
and adjusting rate control (gf interval and active_worst/target size).
Added unittests (datarate) for 1 pass vbr mode, with non-zero lag.
Added an experimental option to limit QP based on lookahead.
Overall positive gain in metrics on ytlive set:
avgPNSR/SSIM up on average ~1-3%; several clips up by 5, 7%.
Change-Id: I960d57dfc89de121c4824b9a9bf88d2814e74b56
Modify the gfu_boost and af_ratio setting based on the
average frame motion level.
Change only affects 1 pass vbr.
Metrics overall positive on ytlive set.
On average up by ~1%, several clips up by 2-4%.
Change-Id: Ic18c49eb2df74cb4986b63cdb11be36d86ab5e8d
Code cleaup, use existing rolling_actual/target metrics instead,
set threshold to get same/similar effect.
Little/no change in metrics on ytlive set.
Change-Id: I74f3c3d0a143a9cf20dc9c3dee54c0f7e6a97a51
Add a max condition and lower the min value.
No change in behavior (metrics for yt live set) for the
default min/max_gf_interval=4/16 settings.
Small positive change when min/max_gf_interval=7/16
(for 60fps clips on ytlive set).
Change-Id: I1c1d72425c86c69419ea43fb9730130e81062f91
Changes to the function the redistributes bits from overshoot
or undershoot throughout the rest of the clip to respond more
quickly.
Change-Id: I90f10900cdd82cf2ce1d8da4b6f91eb5934310da
The use of this value is preventing rate adjustment on clips
or sections that have very little motion but high noise and
this can give rise to some sections with massive overshoot.
Change-Id: I9a65c7c1148dc5d3a7d8b23e50fc1733f3661621
Rename and change to how its updated.
Only affects 1 pass vbr.
Small change in metrics (< ~0.1%) on ytlive set.
Change-Id: Ibb1fe485699b6c4a8194951c8f229abe2f64b9a5
