Debugging in postproc needs more flags to allow for specific
block types to be turned on or off in the visualizations.
Must be enabled with --enable-postproc-visualizer during
configuration time.
Change-Id: Ia74f357ddc3ad4fb8082afd3a64f62384e4fcb2d
Small changes to the default zero bin and rounding tables.
Though the tables are currently the same for the Y1 and Y2 cases
I have left them as separate tables in case we want to tune this later.
There is now some adjustment of the zbin based on the prediction mode.
Previously this was restricted to an adjustment for gf/arf 0,0 MV.
The exact quantizer now marginal outperforms and is the default.
The overall average gain is about 0.5%
Change-Id: I5e4353f3d5326dde4e86823684b236a1e9ea7f47
The check '(user_data_end - partition < partition_size)' must be
evaluated as a signed comparison, but because partition_size was
unsigned, the LHS was promoted to unsigned, causing an incorrect
result on 32-bit. Instead, check the upper and lower bounds of
the segment separately.
Change-Id: I6266aba7fd7de084268712a3d2a81424ead7aa06
Change Ice204e86 identified a problem with bitrate undershoot due to
low precision in the timestamps passed to the library. This patch
takes a different approach by calculating the duration of this frame
and passing it to the library, rather than using a fixed duration
and letting the library average it out with higher precision
timestamps. This part of the fix only applies to vpxenc.
This patch also attempts to fix the problem for generic applications
that may have made the same mistake vpxenc did. Instead of
calculating this frame's duration by the difference of this frame's
and the last frame's start time, we use the end times instead. This
allows the framerate calculation to scavenge "unclaimed" time from
the last frame. For instance:
start | end | calculated duration
======+=======+====================
0ms 33ms 33ms
33ms 66ms 33ms
66ms 99ms 33ms
100ms 133ms 34ms
Change-Id: I92be4b3518e0bd530e97f90e69e75330a4c413fc
If this function fails silently, the nestegg context is destroyed and
future nestegg calls will segfault.
Change-Id: Ie6a0ea284ab9ddfa97b1843ef8030a953937c8cd
Change color reference frame to blend the macro block edge.
This helps with layering of visualizations.
Add block coloring for intra prediction modes.
Change-Id: Icefe0e189e26719cd6937cebd6727efac0b4d278
The old value 1000 was too low, which caused the effective duration and
frame rate calculation to have an 1% error for typical 30 frame/second
inputs. Symptom of the issue has been that most 2 pass encodings were
undershooting target bit rate by 1% or so for 30 fps input.
Change-Id: Ice204e86f844ceb9ce973456f2b995cc095283cf
Defaulting to 320x240 for raw streams is arbitrary and error-prone.
Instead, require that the width and height be set manually if they
can't be parsed from the input file.
Change-Id: Ic61979857e372eed0779c2677247e894f9fd6160
Split motion vectors were all being treated as 4x4
blocks. Now correctly handle 16x8, 8x16, 8x8, 4x4
blocks.
Change-Id: Icf345c5e69b5e374e12456877ed7c41213ad88cc
STDIO streams are opened in text mode by default on Windows. This patch
changes the stdin/stdout streams to be in binary mode if they are being
used for I/O from the vpxenc or vpxdec tools.
Fixes issue #216. Thanks to mw AT hesotech.de for the fix.
Change-Id: I34525b3ce2a4a031d5a48d36df4667589372225b
Now draw 16 vectors for SPLITMV mode.
Fixed constrain line to block divide by zero issues.
Blend block was not centering the shaded area correctly.
Change-Id: I1edabd8b4e553aac8d980f7b45c80159e9202434
(test clip: tulip)
For good quality mode with speed=1, this gave the encoder
a small (2 - 3%) performance boost.
Change-Id: I8a1d4269465944ac0819986c2f0be4b0a2ee0b35
Unlike GCC, Visual Studio compiler doesn't allocate SAD output
array 16-byte aligned, which causes crash in visual studio.
Change-Id: Ia755cf5a807f12929bda8db94032bb3c9d0c2362
This eliminates a large set of warnings exposed by the Mozilla build
system (Use of C++ comments in ISO C90 source, commas at the end of
enum lists, a couple incomplete initializers, and signed/unsigned
comparisons).
It also eliminates many (but not all) of the warnings expose by newer
GCC versions and _FORTIFY_SOURCE (e.g., calling fread and fwrite
without checking the return values).
There are a few spurious warnings left on my system:
../vp8/encoder/encodemb.c:274:9: warning: 'sz' may be used
uninitialized in this function
gcc seems to be unable to figure out that the value shortcut doesn't
change between the two if blocks that test it here.
../vp8/encoder/onyx_if.c:5314:5: warning: comparison of unsigned
expression >= 0 is always true
../vp8/encoder/onyx_if.c:5319:5: warning: comparison of unsigned
expression >= 0 is always true
This is true, so far as it goes, but it's comparing against an enum,
and the C standard does not mandate that enums be unsigned, so the
checks can't be removed.
Change-Id: Iead6cd561a2afaa3d801fd63f1d8d58953da7426
Turned down the blending level to make colored blocks obscure
the video less.
Not blending the entire block to give distinction to macro
block edges.
Added configuration so that macro block blending function can
be optimized.
Change to constrain line as to when dx and dy are computed.
Now draw two lines to form an arrow.
Change-Id: I986784e6abff65ea3e0d1437dfca7d06d44ede71
If --psnr option is enabled vpxenc will output PSNR values for the
entire file. Added a \n before final output to make sure the output
is on its own line. Overall and Avg psnr matches the values written
to opsnr.stt file.
Change-Id: Ibac5fa9baf8d5a626ea0d6ba161b484e6e8427ee
This eliminates a large set of warnings exposed by the Mozilla build
system (Use of C++ comments in ISO C90 source, commas at the end of
enum lists, a couple incomplete initializers, and signed/unsigned
comparisons).
It also eliminates many (but not all) of the warnings expose by newer
GCC versions and _FORTIFY_SOURCE (e.g., calling fread and fwrite
without checking the return values).
There are a few spurious warnings left on my system:
../vp8/encoder/encodemb.c:274:9: warning: 'sz' may be used
uninitialized in this function
gcc seems to be unable to figure out that the value shortcut doesn't
change between the two if blocks that test it here.
../vp8/encoder/onyx_if.c:5314:5: warning: comparison of unsigned
expression >= 0 is always true
../vp8/encoder/onyx_if.c:5319:5: warning: comparison of unsigned
expression >= 0 is always true
This is true, so far as it goes, but it's comparing against an enum, and the C
standard does not mandate that enums be unsigned, so the checks can't be
removed.
Change-Id: Iaf689ae3e3d0ddc5ade00faa474debe73b8d3395
Turned down the blending level to make colored blocks obscure
the video less.
Not blending the entire block to give distinction to macro
block edges.
Added configuration so that macro block blending function can
be optimized.
Change to constrain line as to when dx and dy are computed.
Now draw two lines to form an arrow.
Change-Id: Id3ef0fdeeab2949a6664b2c63e2a3e1a89503f6c
If --psnr option is enabled vpxenc will output PSNR values for the
entire file. Added a \n before final output to make sure the output
is on its own line. Overall and Avg psnr matches the values written
to opsnr.stt file.
Change-Id: I869268b704fe8b0c8389d318cceb6072fea102f8
Use mpsadbw, and calculate 8 sad at once. Function list:
vp8_sad16x16x8_sse4
vp8_sad16x8x8_sse4
vp8_sad8x16x8_sse4
vp8_sad8x8x8_sse4
vp8_sad4x4x8_sse4
(test clip: tulip)
For best quality mode, this gave encoder a 5% performance boost.
For good quality mode with speed=1, this gave encoder a 3%
performance boost.
Change-Id: I083b5a39d39144f88dcbccbef95da6498e490134
This patch fixes the system dependent entries for the half-pixel
variance functions in both the RTCD and non-RTCD cases:
- The generic C versions of these functions are now correct.
Before all three cases called the hv code.
- Wire up the ARM functions in RTCD mode
- Created stubs for x86 to call the optimized subpixel functions
with the correct parameters, rather than falling back to C
code.
Change-Id: I1d937d074d929e0eb93aacb1232cc5e0ad1c6184
MKV requires a unique(ish) TrackID element in the track info header.
Instead of the current hard-coded ID, take a hash of the video track
and use that. This value is not written in the deterministic output
mode, despite being a deterministic value itself, to give flexibility
to change the hash algorithm and not affect bisecting across the
change.
Change-Id: I807fc3ea6d1427a151c3ef703269b67e80aef860
This allows multiple post processor debug levels to be overlayed.
i.e. can show colored reference blocks and visual motion vectors.
Change-Id: Ic4a1df438445b9f5780fe73adb3126e803472e53
ARM used to explicitly remove this file from the build. With the RTCD
changes, that's no longer possible. These errors also exist for x86 w/o
RTCD, but that's not the default configuration
Change-Id: I3e10e5553ddf3278e8d3c9365ca6fb84f52f5066
