In mode selection loop, once mode_index pass mode_skip_start, all
modes with a different reference frame from current best mode are
masked out using mode_skip_mask.
However, the setting of mode_skip_mask may use an invalid mode if
there is no mode tested yet. This commit fixes the issue by making
sure a mode has been tested and selected. Otherwise, no mode will be
masked out because of their reference frame.
Change-Id: Ib0009e8a96836a65cf5347440fff8a2e1a67f29f
Calculate the difference variance between last source frame and
current source frame. The variance is calculated at 16x16 block
level. The variances are compared to several thresholds to decide
final partition sizes.
An adaptive strategy is implemented to decide using
SOURCE_VAR_BASED_PARTITION or FIXED_PARTITION based on motions
in the video. The switching test is done once every
search_type_check_frequency frames.
The selection of source_var_thresh needs to be investigated
further later.
RTC set Borg test showed 0.424% overall psnr gain, and 0.357%
ssim gain. For clips with large enough static area, the
encoding speedup is around 2% to 15%.
Change-Id: Id7d268f1d8cbca7fb8026aa4a53b3c77459dc156
This commit allows the non-RD mode decision flow to select
prediction filter type in NEWMV mode. It provides 8.14% compression
performance gains in both settings of AQ=0 and 3. The current speed
impact is about 5% to 10% slower.
Change-Id: Id66ecebf77abd8f90fb3f6a066c0e8dfb4bf1c42
Adds some high-level hooks for profile 2 before further
progress on the implementation.
According to the definitiion in this patch:
1. Profile 2 only supports 10 or 12 bit color but not 8
2. Profile 2 supports all color sampling modes: 444, 422 and 420,
and alpha plane.
3. Profile 3 is currently undefined.
Please consider the definition carefully and suggest modifications
to the definition as needed.
Change-Id: I5b284fc679e54ac5aee171af72fa7994cfd28995
Copy up to a certain bsize, otherwise set to a fixed bsize.
This helsp to reduce artifact near moving boundary caused by full partition
copy without checking motion of super-block.
This artifact can occur at speeds 3,4 in real-time mode.
Issue: https://code.google.com/p/webm/issues/detail?id=738.
Change-Id: I05812521fd38816a467f72eb6a951cae4c227931
ARF overlays now use the same rate correction factor as regular inter
frames, further testing would be needed to see if it makes sense to use
a completely separate rate correction factor for ARF overlays.
$ vpxenc --cpu-used=5 --fps=50/1 --target-bitrate=2000
parkjoy.y4m -o out.webm
=> Before: 3356 kb/s
=> After: 2271 kb/s
Change-Id: I73e4defa615ba7a8a2bdb845864f4b1721cbbffe
This commit estimates the motion vector rate cost right after full
pixel motion search. It combines this and the mode cost and compares
the corresponding rate-distortion cost. If it is already above the
current best one, skip the rest sub-pixel motion search and modeling
process. For pedestrian_area 1080p at 4000 kpbs, the speed -5 runtime
goes down from 39425 ms -> 38399 ms.
Change-Id: If4cd7119fd6c266798d5cf1d19d19ab425e52a26
Reinstates this macro and truns it on in order to avoid issues
due to some frames at the end starving in harder videos.
A more acceptable solution is in the works.
Change-Id: I3c46148e86fa6114e3fed245246fb3686a9e6700
This commit slightly increases the bit allocation for key frame. This
improves speed -5 coding performance by 2.77% with aq-mode=0 and by
2.78% with aq-mode=3.
Change-Id: Iaa3e777f80b9706306606af06e89852bac146659
For real-time mode under cbr, this increases the gain (5-10%)
for speed 5 (none/little change for 6), on vc-clips.
Change-Id: I9b38beeb3c820de22c43a0ba53a9456168dd24ba
Turns off the DISABLE_RC_LONG_TERM_MEM macro and makes other changes
in the way the bits are updated, to make 2-pass rate control track
target bitrates closer.
Change-Id: I5f3be4b11c2908e6a9a9a1dd4fcf4e65531c44d8
This commit reduces the frequency of frames using finer quantizer
in non-RD coding flow, and slightly tune up the quantizer resolution
when used. It provides 1.7% compression gains in speed -5 at no speed
difference.
Change-Id: I430249a51260a841a0402666e5ec1566e4f7d5a6
The new tolerance is a little higher than before (especially
for kf/gf/arf) so this change gives an encode speed up
for some clips up for speeds 0-2.
Change-Id: I63f7d6c9cc11c7f58742f41e250dcd3eab1741eb
This code/setting was actually not used (since speed features were not set on first frame,
until a recent change) and should be removed.
In CBR mode, the q value for the first frame can be controlled by setting
the target size via the parameters rc_buf_initial_sz (and max_intra_size_pct).
Change-Id: I65afc64972b36c449bd5a8c25800e65da5389066
While encoding a frame, its last frame source can be used to give
acurate motion information. This patch prevents last frame to be
overwritten so that it is available during current frame encoding.
The last source is scaled when it is necessary. cpi->Last_Source
points to the last source frame.
Change-Id: I0e1ef5e9e1d2badf9d0c7a1a44a7ed5b24c09425
Use a crude correction factor to correct for
lower compression efficiency at higher encode
speeds when estimating the max Q for the
clip.
Change-Id: I5ae377647f4adf5e91d700a8791fb3b8f70efc73
This commit optimizes the bit allocation for the non-RD coding flow.
It applies slightly better quantizer to the frames, where all blocks
run a non-RD partition search. Such frames typically have better
rate-distortion trade off, thus improving the reconstruction quality
for next few frames reference at reasonably low increment in rate
cost.
The coding performance for rtc set at speed -5 with error-resilient
tuned on and rate control set as cbr is improved by 19.58%. It improved
the coding speed by about 10% for a portion of local test clips.
Change-Id: I9d56696cd4359dc8136ca10aff10fff05aaa2686
This commit adjusted the speed steps in rt mode to make the steps
more evenly spaced on speed and quality, specifically:
1. Merged 3 and 4 into one single step 3 and removed confilicting
features.
2. Move 8, 7, 6, 5 to be 7, 6, 5, 4 repsectively.
Change-Id: I38d56d61531f3561d772aef953c411c8fb38c063
Root cause is the different default register length between x86
and x64 platform. Change spatial_layer_id to long long.
Change-Id: If1a5972365c7a59f7e76cb4fd714610f3d48a8ff
Small speed gain for speed 1.
Quality is generally a little up for speed 2.
Speed 3 was similar to speed 4 but now positioned more
evenly between 2 and 4 speed and quality wise.
(opsnr +5.6% ssim +8.25% across all sets)
Speed 4 is a little slower than before but sizable quality gains.
(opsnr +3.7% ssim +6.8% across all sets)
The code has been cleaned up a bit so that for each incremental
speed step changes over the previous speed step are applied.
This makes it easier to see what is changing from one setting to
the next.
Change-Id: I2d98d0d6230af23486adaec01908f58942a7cdeb
Allow tx search for ARF and GF helps quality but a little slower.
Setting subpel_iters_per_step to 1 improves encode speed.
Setting sf->mode_skip_start = 10 improves speed.
Initial local results suggest overall impact on quality is neutral
but encode is up to 15% faster.
Change-Id: Ibde02cae6626a44c10a1da0cefe888afbb51f037
Removes a TODO. Changed meaning of some parameters
(target-max-percent refresh and starting index) to be
defined relative to superblock. Also, modify turn-off condition.
Change-Id: I5e55f372b7079c24f9cdac0b06fa34620dbf456b
This commit enables the non-RD mode decision coding flow to
adaptively apply partition search in non-refresh frame, when the
collocated block in previous frame suggests there might be a motion
activity. It refactors the update_state_rt() function to support
buffer swap of mode_info struct, thereby unifying the encoding
stage across various non-RD coding modes.
It provides 5% compression performance gains in speed -6 for rtc
test set, at about 12% speed slow down.
Change-Id: Iefa374aed5a11c4b7ff9a3ed36a98ea8bd184edb
Fix so that vp9_update_segment_aq() will use the correct (i..e, chosen)
encoding mode (from ctx struct) in update_state.
Change-Id: Icc4b66f3935fad5ec4516a4d57e843d12c365e64
This commit allows the recursive non-RD partition search to early
terminate sub search tree when the cumulative rate-distortion is
already above the best available.
Change-Id: Ifdbcbb4bee229f47fde3033200829577c9f1fc1d
This commit added a speed feature to make the logic of calculating
skip_recode on a block level more explicit. This also enable the
feature to be enabled at speed 5 where the previous logic is too
conservative, help gain back the lost speed for --rt(-5).
Change-Id: Ieb37ca3e85c2e7bda343486edf13d5f5395f2233
There were a few conflicts between the new non-RD partition search
and recent clean-up patches, which were not caught by git control.
This commit fixed these issues.
Change-Id: Ieebefbd6c19d81d0d13e3c568877d5cce2ab7797
This commit takes out the if statements on using adaptive motion
search flag. This feature is automatically enabled in non-RD mode
decision flow for variable partition types search.
Change-Id: I5a25cf9109d84d07aa61b3e02c8d32dda1e90cb0
This commit enables a recursive partition type search for non-RD
mode decisions. It allows the encoder to choose variable block
sizes in a 64x64 block based on rate-distortion modeling.
It improves speed -6 coding efficiency for rtc set by 2.4%. Most
of the gains come from 32-40dB range, where many sequences gain
about 5% to 20%. Local tests suggest there is no speed change.
Change-Id: I06300016e500a21652812b7b3b081db39a783d66
This commit reformats non-RD coding flow layout to allow mode
decision with fixed and variable block sizes.
Change-Id: I2cdd3bb9f26c499ee4a9849004fd925cdd195d09
2 functions were optimized for avx2 by using full 256 bit register
In order to handle 32 elements in parallel instead of only 16 in parallel:
1. vp9_sad32x32x4d
2. vp9_sad64x64x4d
The function level gain is 66% and the user level gain is ~1%.
Change-Id: I4efbb3bc7d8bc03b64b6c98f5cd5c4a9dd3212cb
The third pred_mv is stored in x->pred_mv[ref_frame]. This commit make
sure the correct mv is read.
Change-Id: Ibed24daf36703a63f0394c87b2381ee1d2eb7910
In non-rd pick_mode code, added mode skipping according to
thresholds. Used rd thresholds now, but we can modified them
later for real-time case.
RTC set borg test showed a 0.095% PSNR gain. For different rtc
clips, the real-time(speed 7) encoder speedup is 2% - 10%.
Change-Id: Ic72535c96b891092c662453be32d3168f7e34dcc
The flag x->skip_recode interacts badly with
the cpi->sf.use_nonrd_pick_mode and
cpi->sf.skip_encode_sb speed settings.
Restricting the use of the skip_decode flag when
these other speed choices are in use helps quality
for speeds 3 and 4 by a large amount with only a
small impact on speed.
Average improvmentes for 2 pass speed 4:
Derf +8.8%
Yt + 10.53%
Std-Hd +6.95%
yt-hd + 22.95%
Change-Id: I8010876d8012042a11077c92e69d813c3dfa58eb
This commit changed how q is validated in lossless mode. With this
commit, when --lossless=1 is specificed at commandline, --min-q and
--max-q are now ignored. This is to make the option non-ambiguious.
Change-Id: I33e85690460537509d33be75d6a3597be4affc09
This is an initial attempt to allow variable block size partition
in non-RD coding flow. It tests 8x8, 16x16 and 32x32 block size per
64x64 block, all using non-RD mode decision and the associated rate
distortion costs from modeling, then selects the best block size to
encode the entire 64x64 block. Such operations are triggered every
other 3 frames. The blocks of intermediate frames will reuse the
collocated block's partition type.
It improves the compression performance by 13.2%. Note that the gains
are not evenly distributed. For many hard clips, the compression
performance is improved by 20% to 28%. Local speed test shows that
it will also increase runtime by 50%, as compared to speed -7. It is
now enabled in speed -6 setting.
Change-Id: Ib4fb8659d21621c9075b3c369ddaa9ecb0a4b204
1. Save stats for each spatial layer
2. Add frame buffer management for svc first pass rc
3. Set default spatial layer to 1
4. Flush encoder at the end of stream in test app
This only supports spatial svc.
Change-Id: Ia89cfa87bb6394e6c0405b921d86c426d0a0c9ae
The use of uninitialized skip flag will trigger inconsistency in
coding statistics, when alternate RD and non-RD coding modes are
enabled. This commit fixes this issue and removes unnecessary if
statements from update_state_rt.
Change-Id: I7d549dcb0e3ef48b999e5bbc78174ba84502cfcf
