Produce the token partitions on-the-fly, while processing each MB.
Context is updated at the beginning of each frame based on the
previoud frame's counters. Optimally encoder outputs partitions in
separate buffers. For frame based output, partitions are concatenated
internally.
Limitations:
- enabled just in combination with realtime-only mode
- number of encoding threads has to be equal or less than the
number of token partitions. For this reason, by default the encoder
will do 8 token partitions.
- vpxenc supports partition output (-P) just in combination with
IVF output format (--ivf)
Performance:
- Realtime encoder can be up to 13% faster (ARM) depending on the number
of threads and bitrate settings. Constant gain over the 5-16 speed
range.
- Token buffer reduced from one frame to 8 MBs
Quality:
- quality is affected by the delayed context updates. This again
dependents on input material, speed and bitrate settings. For VC
style input the loss seen is up to 0.2dB. If error-resilient=2
mode is used than the effect of this change is negligible.
Example:
./configure --enable-realtime-only --enable-onthefly-bitpacking
./vpxenc --rt --end-usage=1 --fps=30000/1000 -w 640 -h 480
--target-bitrate=1000 --token-parts=3 --static-thresh=2000
--ivf -P -t 4 -o strm.ivf tanya_640x480.yuv
Change-Id: I127295cb85b835fc287e1c0201a67e378d025d76
use oxcf instead of common in check to Reinit the
lookahead buffer if the frame size changes
prior behavior would cause assertion fail/crash
first observed in:
support changing resolution with vpx_codec_enc_config_set
Change-Id: Ib669916ca9b4f206d4cc3caab5107e49d39a36aa
Second shot at this...
Sync with loopfilter thread as late as possible, usually just at the
beginning of next frame encoding. This returns control to application
faster and allows a better multicore scaling.
When PSNR packets are generated the final filtered frame is needed
imediatly so we cannot delay the sync. Same has to be done when
internal frame is previewed.
Change-Id: I64e110c8b224dd967faefffd9c93dd8dbad4a5b5
Allow the application to change the frame size during encoding. This
is only supported when not using lagged compress.
Change-Id: I89b585d703d5fd728a9e3dedf997f1b595d0db0f
This is the final commit in the series converting to the new RTCD
system. It removes the encoder csystemdependent files and the remaining
global function pointers that didn't conform to the old RTCD system.
Change-Id: I9649706f1bb89f0cbf431ab0e3e7552d37be4d8e
This commit continues the process of converting to the new RTCD
system. It removes the last of the VP8_ENCODER_RTCD struct references.
Change-Id: I2a44f52d7cccf5177e1ca98a028ead570d045395
This is a proof of concept RTCD implementation to replace the current
system of nested includes, prototypes, INVOKE macros, etc. Currently
only the decoder specific functions are implemented in the new system.
Additional functions will be added in subsequent commits.
Overview:
RTCD "functions" are implemented as either a global function pointer
or a macro (when only one eligible specialization available).
Functions which have RTCD specializations are listed using a simple
DSL identifying the function's base name, its prototype, and the
architecture extensions that specializations are available for.
Advantages over the old system:
- No INVOKE macros. A call to an RTCD function looks like an ordinary
function call.
- No need to pass vtables around.
- If there is only one eligible function to call, the function is
called directly, rather than indirecting through a function pointer.
- Supports the notion of "required" extensions, so in combination with
the above, on x86_64 if the best function available is sse2 or lower
it will be called directly, since all x86_64 platforms implement
sse2.
- Elides all references to functions which will never be called, which
could reduce binary size. For example if sse2 is required and there
are both mmx and sse2 implementations of a certain function, the
code will have no link time references to the mmx code.
- Significantly easier to add a new function, just one file to edit.
Disadvantages:
- Requires global writable data (though this is not a new requirement)
- 1 new generated source file.
Change-Id: Iae6edab65315f79c168485c96872641c5aa09d55
This commit is incomplete, as it does not synchronize the loop filter
before returning a handle to the reconstructed frame in
vpx_codec_get_preview_frame(), which can cause (false?) failures
when running the test_reconstruct_buffer test.
This may be related to a bug that does cause visible artifacts, which
is also under investigation.
This reverts commit 380d64ecb1.
Change-Id: Iad710941e7731d44fc2bde63bc63d6763cc4629e
A processor with ARMv7 instructions does not
necessarily have NEON dsp extensions. This CL
has the added side effect of allowing the ability
to enable/disable the dsp extensions cleanly.
Change-Id: Ie1e879b8fe131885bc3d4138a0acc9ffe73a36df
When running multi-layer (ML) encodes and dynamically
changing coding parameters on the fly (e.g. frame
duration/rate, bandwidths allocated to each layer)
the encoder would not produce sensible output.
In certain cases the rate targeting would be
hideously inaccurate.
These fixes make it possible to change these coding
parameters correctly and to maintain accurate control
of the rate targeting.
I also added the specification of the input timebase
into the test program, vp8_scalable_patterns.c.
Patch 2: Moved declaration to appease MS compiler)
Change-Id: Ic8bb5a16daa924bb64974e740696e040d07ae363
The code had a number of constructs like (condition)?1:0,
which is redundant with C's semantics. In the cases where a boolean
operator was used in the condition, simply remove the ternary part.
Otherwise adjust the surrounding expression to remove the condition
(eg, for rounding up. See pickinter.c and rdopt.c)
Change-Id: Icb2372defa3783cf31857d90b2630d06b2c7e1be
The total_stats, this_frame_stats, and total_left_stats structures
were previously create by a heap allocation, despite being of fixed
size. These structures were allocated and deallocated during
{de,}allocate_compressor_data, which is reinvoked whenever the frame
size changes. Unfortunately, this clobbers the total_stats and
total_left_stats data.
Historically, these were variable size at one time, due to the first
pass motion map, which necessitated their being created by a unique
heap allocation. However, this bug with the total_stats being
clobbered has probably been present since that initial implementation.
These structures are instead moved to be stored within the struct
twopass_rc directly, rather than being heap allocated separately.
Change-Id: I7f9e519e25c58b92969071f0e99fa80307e0682b
Do the test filtering in the existing backup frame buffer instead of
the original. Copy the original data into extra buffer before doing
the filtering. This way there is no need to restore the original
unfiltered frame at the end of level picking process.
This came up in some discussions with Johann. Thanks!
Change-Id: I495f4301d983854673276c34ec0ddf9a9d622122
The example encoder down-samples the input video frames a number of
times with a down-sampling factor, and then encodes and outputs
bitstreams with different resolutions.
Support arbitrary down-sampling factor, and down-sampling factor
can be different for each encoding level.
For example, the encoder can be tested as follows.
1. Configure with multi-resolution encoding enabled:
../libvpx/configure --target=x86-linux-gcc --disable-codecs
--enable-vp8 --enable-runtime_cpu_detect --enable-debug
--disable-install-docs --enable-error-concealment
--enable-multi-res-encoding
2. Run make
3. Encode:
If input video is 1280x720, run:
./vp8_multi_resolution_encoder 1280 720 input.yuv 1.ivf 2.ivf 3.ivf 1
(output: 1.ivf(1280x720); 2.ivf(640x360); 3.ivf(320x180).
The last parameter is set to 1/0 to show/not show PSNR.)
4. Decode:
./simple_decoder 1.ivf 1.yuv
./simple_decoder 2.ivf 2.yuv
./simple_decoder 3.ivf 3.yuv
5. View video:
mplayer 1.yuv -demuxer rawvideo -rawvideo w=1280:h=720 -loop 0 -fps 30
mplayer 2.yuv -demuxer rawvideo -rawvideo w=640:h=360 -loop 0 -fps 30
mplayer 3.yuv -demuxer rawvideo -rawvideo w=320:h=180 -loop 0 -fps 30
The encoding parameters can be modified in vp8_multi_resolution_encoder.c,
for example, target bitrate, frame rate...
Modified API. John helped a lot with that. Thanks!
Change-Id: I03be9a51167eddf94399f92d269599fb3f3d54f5
API was not returning correct partition sizes on arm targets.
The armv5 token packing functions were not storing the information to the
partition size table.
As a fix, have one boolcoder instance allocated for each partition so
that partition sizes are internally available after all partitions
were encoded. This will also allow more flexibility in producing
several partitions in parallel.
Use buffer validation (overflow check) in all ARM bitpacking
functions.
Change-Id: I31c8a11d8a7613676f0ff50928cb2a2ab14fd169
There was an implicit reference frame test order (typically LAST,
GOLD, ARF) in the mode selection logic, but this doesn't provide the
expected results when some reference frames are disabled. For
instance, in real-time mode, the speed selection logic often disables
the ARF modes. So if the user disables the LAST and GOLD frames, the
encoder was always choosing INTRA, when in reality searching the ARF
in this case has the same speed penalty as searching LAST would have
had.
Instead, introduce the notion of a reference frame search order. This
patch preserves the former priorities, so if a frame is disabled, the
other frames bump up a slot to take its place. This patch lays the
groundwork for doing something smarter in the frame test order, for
example considering temporal distance or looking at the frames used by
nearby blocks.
Change-Id: I1199149f8662a408537c653d2c021c7f1d29a700
Extend buffer write validation (overflow check) to single token
partition packing, both mb and row based functions.
Change-Id: I36e19b7d37fc43712d05c70e3ad223d3eb5b973d
The calculated frame_rate is a state variable in the codec, and
shouldn't be maintained in the configuration struct. Move it to the
main part of cpi so that it isn't clobbered when the configuration
struct is updated. The initial framerate estimate is moved from the
vp8_cx_iface.c wrapper into the body of init_config() in onyx_if.c, so
that it is only called once and not reset on every call to
vp8_change_config().
Change-Id: I8d9a3d1283330d1ee297d07e9d78d1f2875f2465
Added code to clip the buffer level to the maximum buffer
size. Without this the buffer level would increase
unchecked.
This bug was found when encoding an essentially static
scene at 2Mb/s. The encoder is unable to generate frames
consistent with the high data-rate because Q bottoms out
at Qmin.
As frames generated are consistently undersized the buffer
level increases and does not get checked against the
maximum size specified by the user (or default).
Change-Id: Id8a3c6323d3246da50f7cb53ddbf78b5528032c6
check to make sure that cx_data buffer has enough room before
writting to it, prior behavior did not which could result in a crash.
Change-Id: I3fab6f2bc4a96d7c675ea81acd39ece121738b28
Added the ability to create rate-targeted, temporally
scalable, VP8 compatible bitstreams.
The application vp8_scalable_patterns.c demonstrates how
to use this capability. Users can create output bitstreams
containing upto 5 temporally separable streams encoded
as a single VP8 bitstream.
(previously abandoned as:
I92d1483e887adb274d07ce9e567e4d0314881b0a)
Change-Id: I156250a3fe930be57c069d508c41b6a7a4ea8d6a
Changes to the selection of Q limits for two pass
and two pass CQ mode.
Allowance made for Mode and motion vector costs.
Some refactoring of common code.
For Derf and YT sets CQ mode average improvement
circa 1% (SSIM and Global PSNR).
Some increased tendency to undershoot even when
user CQ not reached.
Patch2: Removed some test code accidentally merged.
Change-Id: Icf74d13af77437c08602571dc7a97e747cce5066
Sync with loopfilter thread just at the beginning of next frame encoding.
This returns control to application faster and allows a better multicore scaling.
When PSNR packets are generated the final filtered frame is needed imediatly
so we cannot delay the sync.
Change-Id: I288d97b5e331d41d6f5bb49d97986fa12ac6f066
This change makes sure that no key frame recoding in real-time mode
even if CONFIG_REALTIME_ONLY is not configured.
Change-Id: Ifc34141f3217a6bb63cc087d78b111fadb35eec2
When active map is specified and the current frame is not a key frame,
golden frame nor a altref frame then copy only those active regions.
This significantly reduces encoding time by as much as 19% on the test
system where realtime encoding is used. This is particularly useful
when the frame size is large (e.g. 2560x1600) and there's only a few
action macroblocks.
Change-Id: If394a813ec2df5a0201745d1348dbde4278f7ad4
This reverts commit b5ea2fbc2c. Further
testing showed noticable keyframe popping in some cases, reverting this
for now to give time for a proper fix.
Conflicts:
vp8/encoder/onyx_if.c
vp8/encoder/ratectrl.c
Change-Id: I159f53d1bf0e24c035754ab3ded8ccfd58fd04af
This patch fixes a bug in the interaction between the recode loop and
spatial resampling. If the codec was in a spatial resampling state,
and a subsequent iteration of the recode loop disables resampling,
then the source buffer must be reset to the unscaled source.
Change-Id: I4e4cd47b943f6cd26a47449dc7f4255b38e27c77
sharpness was not recalculated in vp8cx_pick_filter_level_fast
remove last_filter_type. all values are calculated, don't need to update
the lfi data when it changes.
always use cm->sharpness_level. the extra indirection was annoying.
don't track last frame_type or sharpness_level manually. frame type
only matters for motion search and sharpness_level is taken care of in
frame_init
move function declarations to their proper header
Change-Id: I7ef037bd4bf8cf5e37d2d36bd03b5e22a2ad91db
In sub-pixel motion search, the search range is small(+/- 3 pixels).
Preload whole search area from reference buffer into a 32-byte
aligned buffer. Then in search, load reference data from this buffer
instead. This keeps data in cache, and reduces the crossing cache-
line penalty. For tulip clip, tests on Intel Core2 Quad machine(linux)
showed encoder speed improvement:
3.4% at --rt --cpu-used =-4
2.8% at --rt --cpu-used =-3
2.3% at --rt --cpu-used =-2
2.2% at --rt --cpu-used =-1
Test on Atom notebook showed only 1.1% speed improvement(speed=-4).
Test on Xeon machine also showed less improvement, since unaligned
data access latency is greatly reduced in newer cores.
Next, I will apply similar idea to other 2 sub-pixel search functions
for encoding speed > 4.
Make this change exclusively for x86 platforms.
Change-Id: Ia7bb9f56169eac0f01009fe2b2f2ab5b61d2eb2f
This is done by expanding luma row to 32-byte alignment, since
there is currently a bunch of code that assumes that
uv_stride == y_stride/2 (see, for example, vp8/common/postproc.c,
common/reconinter.c, common/arm/neon/recon16x16mb_neon.asm,
encoder/temporal_filter.c, and possibly others; I haven't done a
full audit).
It also uses replaces the hardcoded border of 16 in a number of
encoder buffers with VP8BORDERINPIXELS (currently 32), as the
chroma rows start at an offset of border/2.
Together, these two changes have the nice advantage that simply
dumping the frame memory as a contiguous blob produces a valid,
if padded, image.
Change-Id: Iaf5ea722ae5c82d5daa50f6e2dade9de753f1003
This patch attempts to improve the handling of CBR streams with
respect to the short term buffering requirements. The "buffer level"
is changed to be an average over the rc buffer, rather than a long
running average. Overshoot is also tracked over the same interval
and the golden frame targets suppressed accordingly to correct for
overly aggressive boosting.
Testing shows that this is fairly consistently positive in one
metric or another -- some clips that show significant decreases
in quality have better buffering characteristics, others show
improvenents in both.
Change-Id: I924c89aa9bdb210271f2e03311e63de3f1f8f920
Separate simple filter with reduced no. of parameters.
MB filter level picking based on precalculated table. Level table updated for
each frame. Inside and edge limits precalculated and updated just when
sharpness changes. HEV threshhold is constant.
ARM targets use scalars and others vectors.
Change works only with --target=generic-gnu
All other targets have to be updated!
Change-Id: I6b73aca6b525075b20129a371699b2561bd4d51c
Allow the encoder to inform the application that the encoded frame will not
be used as a reference.
Change-Id: I90e41962325ef73d44da03327deb340d6f7f4860
In this commit I have added an experimental function
that tests prediction quality either side of a central position
to calculate a suggested boost number for an ARF frame.
The function is passed an offset from the current position and
a number of frames to search forwards and backwards.
It returns a forward, backward and compound boost number.
The new code can be deactivated using #define NEW_BOOST 0
In its current default state the code searches forwards and backwards
from the proposed position of the next alt ref.
The the old code used a boost number calculated by scanning forward
from the previous GF up to the proposed alt ref frame position.
I have also added some code to try and prevent placement of a gf/arf
where there is a brief flash.
Change-Id: I98af789a5181148659f10dd5dd2ff2d4250cd51c
Adding support in the encoder for generating
independent residual partitions by forcing
equal probabilities over the prev coef entropy
contexts.
Change-Id: I402f5c353255f3ca20eae2620af739f6a498cd21
This reverts commit 212f618373.
Further testing shows that the overshoot accumulation/damping is too
aggressive on some clips. Allowing the accumulated overshoot to
decay and limiting to damping to golden frames shows some promise.
But some clips show significant overshoot in the buffer window, so
I think this still needs work.
Change-Id: Ic02a9ca34f55229f9cc04786f4fab54cdc1a3ef5
This patch attempts to reduce the peak bitrate hit by the encoder
when using small buffer windows.
Tested on the CIF set over 200-500kbps using these settings:
--buf-sz=500 --buf-initial-sz=250 --buf-optimal-sz=250 \
--undershoot-pct=100
Two pass encodes were tested at best quality. One pass encodes were
tested only at realtime speed 4:
--rt --cpu-used=-4
The peak datarate (over the specified 500ms window) was measured
for each encode, and averaged together to get metric for
"average peak," computed as SUM(peak)/SUM(target). This patch
reduces the average peak datarate as follows:
One pass:
baseline: 1.29715
this patch: 1.23664
Two pass:
baseline: 1.32702
this patch: 1.37824
This change had a positive effect on our quality metrics as well:
One pass CBR:
Min / Mean / Max (pct)
Average PSNR -0.42 / 2.86 / 27.32
Overall PSNR -0.90 / 2.00 / 17.27
SSIM -0.05 / 3.95 / 37.46
Two pass CBR:
Min / Mean / Max (pct)
Average PSNR -4.47 / 4.35 / 35.99
Overall PSNR -3.40 / 4.18 / 36.46
SSIM -4.56 / 6.98 / 53.67
One pass VBR:
Min / Mean / Max (pct)
Average PSNR -5.21 / 0.01 / 3.30
Overall PSNR -8.10 / -0.38 / 1.21
SSIM -7.38 / -0.11 / 3.17
(note: most values here were close to the mean, there were a few
outliers on files that were very sensitive to golden frame size)
Two pass VBR:
Min / Mean / Max (pct)
Average PSNR 0.00 / 0.00 / 0.00
Overall PSNR 0.00 / 0.00 / 0.00
SSIM 0.00 / 0.00 / 0.00
Neither one pass or two pass CBR mode adheres particularly strictly
to the short term buffer constraints, and two pass is less
consistent, even in the baseline commit. This should be addressed
in a later commit. This likely will hurt the quality numbers, as it
will have to reduce the burstiness of golden frames.
Aside: My work on this commit makes it clear that we need to make
rate control modes "pluggable", where you can easily write a new
one or work on one in isolation.
Change-Id: I1ea9a48f2beedd59891f1288aabf7064956b4716
vp8_fast_quantize_b_pair_neon function added to quantize
two adjacent blocks at the same time to improve performance.
- Additional 3-6% speedup compared to neon optimized fast
quantizer (Tanya VGA@30fps, 1Mbps stream, cpu-used=-5..-16)
Change-Id: I3fcbf141e5d05e9118c38ca37310458afbabaa4e
Misplaced #endif caused first_time_stamp_ever to only be initialized if
CONFIG_INTERNAL_STATS was set.
Change-Id: I2296a4ab00f7dfb767583edcc5d59b94f48c0621
in onyx_if.c update_reference_frames() make
sure that frame buffer indexes are not equal
before preforming a buffer copy. If two frames
share the same buffer the flags will already be
set correctly.
Change-Id: Ida9b5516d08e3435c90f131d2dc19d842cfb536e
Test showed using hex search in realtime mode largely speed up
encoding process, and still achieves similar quality like the
diamond search we have. Therefore, removed the diamond search
option.
Change-Id: I975767d0ec0539f9f6ed7fdfc09506e39761b66c
fixed a bug where active_worst_quality could be set
below active_best_quality which could result in an
infinite loop.
Change-Id: I93c229c3bc5bff2a82b4c33f41f8acf4dd194039
This patch collects the twopass specific memebers of VP8_COMP into a
dedicated struct. This is a first step towards isolating the two pass
rate control and aids readability by decorating these variables with
the 'twopass.' namespace. This makes it clear to the reader in what
contexts the variable will be valid, and is a hint that a section of
code might be a good candidate to move to firstpass.c in later
refactoring. There likely will be other rate control modes that need
their own specific data as well.
This notation is probably overly verbose in firstpass.c, so an
alternative would be to access this struct through a pointer like
'rc->' instead of 'cpi->firstpass.' in that file. Feel free to make
a review comment to that effect if you prefer.
Change-Id: I0ab8254647cb4b493a77c16b5d236d0d4a94ca4d
This commit restructures the mb activity masking code
to better facilitate experimentation using different metrics
etc. and also allows for adjustment of the zero bin either
for encode only or both the encode and mode selection
stages
It also uses information from the current frame rather than
the previous frame and the default strength has been
reduced.
Change-Id: Id39b19eace37574dc429f25aae810c203709629b
This patch improves the accuracy of frame rate estimation by using a
larger, 1 second window. It also more quickly adapts to step changes
in the input frame rate (ie 30fps to 15fps)
Change-Id: I39e48a8f5ac880b4c4b2ebd81049259b81a0218e
The variable is introduced in commit 2e53e9e53 to make more use of
trellis quantization, but this is no longer necessary after RDMULT
was made adaptive in a number of later commits.
Change-Id: I7420522ec7723f38cf77033466c25afb405d52ae
In NEWMV mode, currently, full search is used as the refining search
after n-step search. By replacing it with an iterative diamond search
of radius 1 largely reduced the computation complexity, but still
maintained the same encoding quality since the refining search is
done for every macroblock instead of only a small precentage of
macroblocks while using full search.
Tests on the test set showed a 3.4% encoding speed increase with none
psnr & ssim loss.
Change-Id: Ife907d7eb9544d15c34f17dc6e4cfd97cb743d41
The existing emulation of posix semaphores on Windows uses SetEvent()
and WaitForSingleObject(), which implements a binary semaphore, not a
counting semaphore as implemented by posix. This causes deadlock when
used with the expected posix semantics. Instead, this patch uses the
CreateSemaphore() and ReleaseSemaphore() calls (introduced in Windows
2000) which have the expected behavior.
This patch also reverts commit eb16f00, which split a semaphore that
was being used with counting semantics into two binary semaphores.
That commit is unnecessary with corrected emulation.
Change-Id: If400771536a27af4b0c3a31aa4c4e9ced89ce6a0
This patch is to fix a rare hang in multi-thread encoder that was
only seen on Windows. Thanks for John's help in debugging the
problem. More test is needed.
Change-Id: Idb11c6d344c2082362a032b34c5a602a1eea62fc
The commit also removed the slow ssim calculation that uses a 7x7
kernel, and revised the comments to better describe how sample ssim
values are computed and averaged
Change-Id: I1d874073cddca00f3c997f4b9a9a3db0aa212276
Renamed configure option "enable-psnr" to "enable-internal-stats" to
better reflect the purpose of the option and eliminate the confusion
reported in http://code.google.com/p/webm/issues/detail?id=35
Change-Id: If72df6fdb9f1e33dab1329240ba4d8911d2f1f7a
Combine calc_iframe_target_size, previously only used for forced
keyframes, with calc_auto_iframe_target_size, which handled most
keyframes.
Change-Id: I227051361cf46727caa5cd2b155752d2c9789364
This is a first step in cleaning up the redundancies between
vp8_calc_{auto_,}iframe_target_size. The pick_frame_size() function is
moved to ratectrl.c, and made to be the primary interface. This means
that the various calc_*_target_size functions can be made private.
Change-Id: I66a9a62a5f9c23c818015e03f92f3757bf3bb5c8
the decision to run the regular or simple loopfilter is made outside the
function and managed with pointers
stop tracking the option in two places. use filter_type exclusively
Change-Id: I39d7b5d1352885efc632c0a94aaf56b72cc2fe15
Rather than using a default size of 1/2 or 3/2 seconds for the first
frame, use a fraction of the initial buffer level to give the
application some control.
This will likely undergo further refinement as size limits on key
frames are currently under discussion on codec-devel@, but this gives
much better behavior for small buffer sizes as a starting point.
Change-Id: Ieba55b86517b81e51e6f0a9fe27aabba295acab0
The arguments to these fprintfs are int not long int so
the format specifier should be "%d" and not "%ld". This
was writing garbage in the linux build.
Change-Id: I3d2aa8a448d52e6dc08858d825bf394929b47cf3
Golden and ALT reference buffers were refreshed by copying from
the new buffer. Replaced this by index manipulation.
Also moved all the reference frame updates to one function for
easier tracking.
Change-Id: Icd3e534e7e2c8c5567168d222e6a64a96aae24a1
Remove tot_key_frame_bits and prior_key_frame_size[] as they were
tracked but never used. Remove intra_frame_target, as it was only
used to initialize prior_key_frame_size.
Refactor vp8_adjust_key_frame_context() some to remove unnecessary
calculations.
Change-Id: Icbc2c83d2b90e184be03e6f9679e678f3a4bce8f
This patch cleans up the source buffer storage and copy mechanism to
allow access through a standard push/pop/peek interface. This approach
also avoids an extra copy in the case where the source is not a
multiple of 16, fixing issue #102.
Change-Id: I05808c39f5743625cb4c7af54cc841b9b10fdbd9
MV sad cost error is only used in full-pixel motion search,
which only need full-pixel resolution instead of quarter-pixel
resolution. This change reduced mvsadcost table size, and
removed unneccessary pamameter passing since this table is
constant once it is generated.
Change-Id: I9f931e55f6abc3c99011321f1dfb2f3562e6f6b0
A large number of functions were defined with external linkage, even
though they were only used from within one file. This patch changes
their linkage to static and removes the vp8_ prefix from their names,
which should make it more obvious to the reader that the function is
contained within the current translation unit. Functions that were
not referenced were removed.
These symbols were identified by:
$ nm -A libvpx.a | sort -k3 | uniq -c -f2 | grep ' [A-Z] ' \
| sort | grep '^ *1 '
Change-Id: I59609f58ab65312012c047036ae1e0634f795779
Clean up vp8_init_config() a bit and remove null pointer case,
as this code can't be called any more and is not an adequate
trap anyway, as a null pointer would cause exceptions before
hitting the test.
Change-Id: I937c00167cc039b3aa3f645f29c319d58ae8d3ee
Issue 291 highlighted the fact that CQ mode was not working
as expected in 1 pass mode,
This commit fixes that specific problem but in so doing I also
uncovered an overflow issue in the VBR code for 1 pass and
some data values not being correctly initialized.
For some clips (particularly short clips), the resulting
improvement is dramatic.
Change-Id: Ieefd6c6e4776eb8f1b0550dbfdfb72f86b33c960
In multithreaded mode the loopfilter is running in its own thread (filter level
calculation and frame filtering). Filtering is mostly done in parallel with the
bitstream packing. Before starting the packing the loopfilter level has
to be calculated. Also any needed reference frame copying is done in the
filter thread.
Currently the encoder will create n+1 threads, where n > 1 is the number of
threads specified by application and 1 is the extra filter thread. With n = 1
the encoder runs in single thread mode. There will never be more than n threads
running concurrently.
Change-Id: I4fb29b559a40275d6d3babb8727245c40fba931b
The firstpass motion map consists of an 8-bit flag for
each MB indicating how strongly the firstpass code
believes it should be filtered during the second pass
ARNR filtering.
For long or large format material the motion map can
become extremely large and hamper the operation of
the encoding process.
This change removes the motion map altogether, leaving
the second pass to rely on the magnitude of the motion
compensated error to determine the filter weight to
use for the MB during ARNR filtering.
Tests on the derf set indicate that the effect of this
change is neutral, with some small wins and losses. The
motion map has therefore been removed based on
a cost/benefit evaluation.
Change-Id: I53e07d236f5ce09a6f0c54e7c4ffbb490fb870f6
