This function now has an AVX intrinsics version which is about 80%
faster compared to the C implementation. This provides a 2-4% total
speed-up for encode, depending on encoding parameters. The function
utilizes 3 properties of the cost function lookup table, constructed
in 'cal_nmvjointsadcost' and 'cal_nmvsadcosts'.
For the joint cost:
- mvjointsadcost[1] == mvjointsadcost[2] == mvjointsadcost[3]
For the component costs:
- For all i: mvsadcost[0][i] == mvsadcost[1][i]
(equal per component cost)
- For all i: mvsadcost[0][i] == mvsadcost[0][-i]
(Cost function is even)
These must hold, otherwise the AVX version of the function cannot be used.
Change-Id: I184055b864c5a2dc37b2d8c5c9012eb801e9daf6
Source noise level estimate is also useful for
setting variance encoder parameters (variance thresholds,
qp-delta, mode selection, etc), so allow it to be used also
if denoising is not on.
Change-Id: I4fe23d47607b4e17a35287057f489c29114beed1
Periodically estiamte noise level in source, and only denoise
if estimated noise level is above threshold.
Change-Id: I54f967b3003b0c14d0b1d3dc83cb82ce8cc2d381
Use the existing VP9_SET_SVC control to set the
first spatial layer to encode.
Since we loop over all spatial layers inside the encoder, the
setting of spatial_layer_id via VP9_SET_SVC has no relevance.
Use it instead to set the first_spatial_layer_to_encode,
which allows an application to skip encoding lower layer(s).
Change only affects the 1 pass CBR SVC.
Change-Id: I5d63ab713c3e250fdf42c637f38d5ec8f60cd1fb
Temporary fix to denoiser when dynamic resizing is on.
-Reallocate denoiser buffers on resized frame.
-Force golden update on resized frame.
-Don't denoise resized frame, and copy source into denoised buffers.
Change-Id: Ife7638173b76a1c49eac7da4f2a30c9c1f4e2000
Dynamic resizing now support two-steps scaling: first go down to
3/4 and then 1/2. This feature is under a flag which controls the
switch between two-steps scaling and one-step scaling (1/2 only).
Change-Id: I3a6c1d3d5668cf8e016a0a02aeca737565604a0f
The loopfilter masks are now built in the decode loop.
This is done so we can eventually reduce the number of
MODE_INFO structs required by the decoder.
The encoder builds the masks for the entire frame prior
to calling the loopfilter.
Change-Id: Ia2146b07e0acb8c50203e586dfae0c4c5b316f11
In the decoder, map this to the output variable vpx_image_t.r_w/h.
This is intended as an improved version of VP9D_GET_DISPLAY_SIZE,
which doesn't work with parallel frame decoding. In the encoder,
map this to a codec control func (VP9E_SET_RENDER_SIZE) that takes
a w/h pair argument in a int[2] (identical to VP9D_GET_DISPLAY_SIZE).
Also add render_size to the encoder_param_get_to_decoder unit test.
See issue 1030.
Change-Id: I12124c13602d832bf4c44090db08c1009c94c7e8
The name "display_*" (or "d_*") is used for non-compatible information
(that is, the cropped frame dimensions in pixels, as opposed to the
intended screen rendering surface size). Therefore, continuing to use
display_* would be confusing to end users. Instead, rename the field
to render_*, so that struct vpx_image can include it.
Change-Id: Iab8d2eae96492b71c4ea60c4bce8121cb2a1fe2d
Reallocation of mi buffer fails if change size on the first frame and
change config in subsequent frames. Add a condition for resolution
check to avoid assertion failure.
BUG=1074
Change-Id: Ie26ed816a57fa871ba27a72db9805baaaeaba9f3
In decoder, export (eventually) into vpx_image_t.range field. In
encoder, use oxcf->color_range to set it (same way as for
color_space).
See issue 1059.
Change-Id: Ieabbb2a785fa58cc4044bd54eee66f328f3906ce
For 1 pass CBR spatial-SVC:
Add cyclic refresh parameters to the svc-layer context.
This allows cyclic refresh (aq-mode=3) to be applied to
the whole super-frame (all spatial layers).
This gives a performance improvement for spatial layer encoding.
Addd the aq_mode mode on/off setting as command line option.
Change-Id: Ib9c3b5ba3cb7851bfb8c37d4f911664bef38e165
The normative (convolve8) filter is optimized/faster than
the nonnormative one. Pass usage of scaler (normative/nonomorative)
to vp9_scale_if_required(), and always use normative one for 1 pass.
Change-Id: I2b71d9ff18b3c7499b058d1325a9554de993dd52
If the encoder dynamic resize is triggered and change config()
is then called, it will reset the current (resized) codec width/height
back to the the config (unresized) width/height (which will then
prevent the resizing action from occurring in encoder_loop).
Avoid this by checking for a change in the config width/height
before resetting the cm->width/height.
Change-Id: Id9d50c0ee8a943abe4b6c72bbaa02d9696f93177
For one pass CBR: only check for updating refresh_golden
if ext_refresh_frame_flags_pending is not set (i.e., == 0).
And move the resetting of ext_refresh_frame_flags_pending = 0
down to after the encode_loop (and account for dropped frames).
This is to prevent changing refresh_golden flga when the user
supplies the reference/update flags.
Change-Id: I4d87b3e705ba43f243667e367503b585c61e2a54
Switch to use the normative (convolve8) filter for source scaling,
only for 1/2x1/2 scaling for now. This is faster and has better
quality than either the vpx_scale_frame or the nonnormative scaler.
Remove the vp9_scale_if_required_fast, which is now not used.
Change-Id: I2f7d73950589d19baafb1fa650eac987d531bcc8
For 1 pass CBR mode under screen content mode:
if pre-analysis (source temporal-sad) indicates significant
change in content, then check the projected frame size after
encode_frame(), and if size is above threshold, force re-encode
of that frame at max QP.
Change-Id: I91e66d9f3167aff2ffcc6f16f47f19f1c21dc688
and FUN_CONV_2D macros. The predict lut now handles
this case. The encoder now calls vpx_scaled_2d() instead
of vpx_convolve8() for scaling.
Change-Id: Ia1c8af8a31e4cb4887a587143108cb45835f7df7
Ssim_vars is used to accumulate stats based 4x4 pixel blocks, this
commit changes the allocations size to be based on mi_rows and mi_cols
to avoid out-of-bound memory access for larger size videos. The hard
coded 720x480 can only work for image size up to 2880x1920.
Change-Id: Id9d07f3f777385b448ac88a6034b7472e4cf3c79
It in essence refactors the code for both the interpolation
filtering and the convolution. This change includes the moving
of all the files as well as the changing of the code from vp9_
prefix to vpx_ prefix accordingly, for underneath architectures:
(1) x86;
(2) arm/neon; and
(3) mips/msa.
The work on mips/drsp2 will be done in a separate change list.
Change-Id: Ic3ce7fb7f81210db7628b373c73553db68793c46
Avoid scaling the references if they have already been scaled.
Change only affects 1 pass non-svc mode for now.
Change-Id: I204f4079c026cba7adce7a7f855d072f6139ccec
The fast scaling for 1 pass mode was being used only on the
first frame after resizing event (because resize_scale_num/den
is set to 1 and only changed for first frame following resize event).
Change-Id: I723b63e21823eb858f25f5662d2bbe4f1842e61f
Proper use/update of resize_state and resize_pending to constrain
the total amount of downsizing to be at most one scale down, for now.
Change-Id: Id18fc32499f2fbdbec16728dcdc9e4eac09098f0
