Add threshold/condition on spatial_variance and brightness level.
Modification to normalization of block variance.
Change resolution limit below which we disable noise estimation.
Change-Id: If5be08a26ceda351242d8a58d2f0bc88c0a918f0
This function now has an AVX intrinsics version which is about 80%
faster compared to the C implementation. This provides a 2-4% total
speed-up for encode, depending on encoding parameters. The function
utilizes 3 properties of the cost function lookup table, constructed
in 'cal_nmvjointsadcost' and 'cal_nmvsadcosts'.
For the joint cost:
- mvjointsadcost[1] == mvjointsadcost[2] == mvjointsadcost[3]
For the component costs:
- For all i: mvsadcost[0][i] == mvsadcost[1][i]
(equal per component cost)
- For all i: mvsadcost[0][i] == mvsadcost[0][-i]
(Cost function is even)
These must hold, otherwise the AVX version of the function cannot be used.
Change-Id: I184055b864c5a2dc37b2d8c5c9012eb801e9daf6
Change is only for real-time mode, speed > 5, and non-screen content mode.
Bias is based on block size and motion vector level (motion above some threshold).
Helps to improves stability in background from lightning changes.
PSNR/SSIM metrics on RTC set almost no change/neutral (within +/- 0.1).
Change-Id: I7eac13c1ae10be4ab1f40acc7f9f1df5653ece9d
Only use non-zero threshold(s) for breakout if
the motion level of the current tested mode is low.
Change-Id: I22aae961cc42371b49d3f648560181cc54708502
Source noise level estimate is also useful for
setting variance encoder parameters (variance thresholds,
qp-delta, mode selection, etc), so allow it to be used also
if denoising is not on.
Change-Id: I4fe23d47607b4e17a35287057f489c29114beed1
Width and height of downscaling resolution should not be lower
than min_width and min_height which can be set as needed, both
are 180 for now.
Change-Id: I34d06704ea51affbdd814246e22ee8d41d991f00
Adjust variance threshold, delta-qp, and intra penalty cost,
based on estimated noise level in source.
Replace denoising_on with a level value=L/M/H.
Change-Id: I0c017dae75a5d897367d2c42dec26f2f37e447c1
Bug relating to issue:- http://b/25090786
base_frame_target is supposed to track the idealized bit
allocation based on error score and not the actual bits
allocated to each frame.
The clamping of this value based on the VBR min and max pct values
was causing a bug where in some cases the loop that adjusts the
active max quantizer for each GF group was running out of bits at
the end of a KF group. This caused a spike in Q and some ugly artifacts.
A second change makes sure that the calculation of the active
Q range for a group DOES, however, take account of clamping.
Change-Id: I31035e97d18853530b0874b433c1da7703f607d1
Periodically estiamte noise level in source, and only denoise
if estimated noise level is above threshold.
Change-Id: I54f967b3003b0c14d0b1d3dc83cb82ce8cc2d381
A new version of vp9_highbd_error_8bit is now available which is
optimized with AVX assembly. AVX itself does not buy us too much, but
the non-destructive 3 operand format encoding of the 128bit SSEn integer
instructions helps to eliminate move instructions. The Sandy Bridge
micro-architecture cannot eliminate move instructions in the processor
front end, so AVX will help on these machines.
Further 2 optimizations are applied:
1. The common case of computing block error on 4x4 blocks is optimized
as a special case.
2. All arithmetic is speculatively done on 32 bits only. At the end of
the loop, the code detects if overflow might have happened and if so,
the whole computation is re-executed using higher precision arithmetic.
This case however is extremely rare in real use, so we can achieve a
large net gain here.
The optimizations rely on the fact that the coefficients are in the
range [-(2^15-1), 2^15-1], and that the quantized coefficients always
have the same sign as the input coefficients (in the worst case they are
0). These are the same assumptions that the old SSE2 assembly code for
the non high bitdepth configuration relied on. The unit tests have been
updated to take this constraint into consideration when generating test
input data.
Change-Id: I57d9888a74715e7145a5d9987d67891ef68f39b7
Added optimization of the 8 bit assembly quantizer routines. This makes
these functions up to 100% faster, depending on encoding parameters.
This patch maskes the encoder faster in both the high bitdepth and 8bit
configurations. In the high bitdepth configuration, it effects profile 0
only.
Based on my profiling using 1080p input the net gain is between 1-3% for
the 8 bit config, and around 2.5-4.5% for the high bitdepth config,
depending on target bitrate. The difference between the 8 bit and high
bitdepth configurations for the same encoder run is reduced by 1% in all
cases I have profiled.
Change-Id: I86714a6b7364da20cd468cd784247009663a5140
Adjust the qp threshold and consec_zeromv threshold for
limiting cyclic refresh. Also increase the refresh period
when the limit amount is significant, and some code-cleanup.
Small gain in PSNR/SSIM metrics: ~0.25/0.3 gain on RTC set, speed 7.
Change only affects non-screen content.
Change-Id: I1ced87a89a132684c071e722616e445b2d18236a
Adjust the qp threshold based on the denoising setting; not allow
to scale directly from original resolution to one half and vise versa.
Change-Id: I032a9b22f8e1c88de6bb81cf8351367223a3e40d
For the re-encoding (at max-qp) on the detected high-content change:
update rate correction factor, reset rate over/under-shoot flags,
and update/reset the rate control for layered coding.
Change-Id: I5dc72bb235427344dc87b5235f2b0f31704a034a
Changes to the breakout behavior for partition selection.
The biggest impact is on speed 0 where encode speed in
some cases more than doubles with typically less than 1%
impact on quality.
Speed 0 encode speed impact examples
Animation test clip: +128%
Park Joy: +59%
Old town Cross: + 109%
Change-Id: I222720657e56cede1b2a5539096f788ffb2df3a1
If high bit depth configuration is enabled, but encoding in profile 0,
the code now falls back on optimized SSE2 assembler to compute the
block errors, similar to when high bit depth is not enabled.
Change-Id: I471d1494e541de61a4008f852dbc0d548856484f
