vpx/vp9/encoder/vp9_encodeframe.c

2410 lines
82 KiB
C
Raw Normal View History

2010-05-18 17:58:33 +02:00
/*
* Copyright (c) 2010 The WebM project authors. All Rights Reserved.
2010-05-18 17:58:33 +02:00
*
* Use of this source code is governed by a BSD-style license
* that can be found in the LICENSE file in the root of the source
* tree. An additional intellectual property rights grant can be found
* in the file PATENTS. All contributing project authors may
* be found in the AUTHORS file in the root of the source tree.
2010-05-18 17:58:33 +02:00
*/
#include "./vpx_config.h"
#include "./vp9_rtcd.h"
#include "vp9/encoder/vp9_encodeframe.h"
#include "vp9/encoder/vp9_encodemb.h"
#include "vp9/encoder/vp9_encodemv.h"
#include "vp9/common/vp9_common.h"
#include "vp9/encoder/vp9_onyx_int.h"
#include "vp9/common/vp9_extend.h"
#include "vp9/common/vp9_entropy.h"
#include "vp9/common/vp9_entropymode.h"
#include "vp9/common/vp9_quant_common.h"
#include "vp9/encoder/vp9_segmentation.h"
#include "vp9/encoder/vp9_encodeintra.h"
#include "vp9/common/vp9_reconinter.h"
#include "vp9/encoder/vp9_rdopt.h"
#include "vp9/common/vp9_findnearmv.h"
#include "vp9/common/vp9_reconintra.h"
#include "vp9/common/vp9_seg_common.h"
#include "vp9/common/vp9_tile_common.h"
#include "vp9/encoder/vp9_tokenize.h"
#include "./vp9_rtcd.h"
2010-05-18 17:58:33 +02:00
#include <stdio.h>
#include <math.h>
2010-05-18 17:58:33 +02:00
#include <limits.h>
#include "vpx_ports/vpx_timer.h"
#include "vp9/common/vp9_pred_common.h"
#include "vp9/common/vp9_mvref_common.h"
#define DBG_PRNT_SEGMAP 0
// #define ENC_DEBUG
#ifdef ENC_DEBUG
int enc_debug = 0;
#endif
static void encode_superblock(VP9_COMP *cpi, TOKENEXTRA **t, int output_enabled,
int mi_row, int mi_col, BLOCK_SIZE_TYPE bsize);
static void adjust_act_zbin(VP9_COMP *cpi, MACROBLOCK *x);
/* activity_avg must be positive, or flat regions could get a zero weight
* (infinite lambda), which confounds analysis.
* This also avoids the need for divide by zero checks in
* vp9_activity_masking().
*/
#define VP9_ACTIVITY_AVG_MIN (64)
/* This is used as a reference when computing the source variance for the
* purposes of activity masking.
* Eventually this should be replaced by custom no-reference routines,
* which will be faster.
*/
static const uint8_t VP9_VAR_OFFS[16] = {128, 128, 128, 128, 128, 128, 128, 128,
128, 128, 128, 128, 128, 128, 128, 128};
// Original activity measure from Tim T's code.
static unsigned int tt_activity_measure(VP9_COMP *cpi, MACROBLOCK *x) {
unsigned int act;
unsigned int sse;
/* TODO: This could also be done over smaller areas (8x8), but that would
* require extensive changes elsewhere, as lambda is assumed to be fixed
* over an entire MB in most of the code.
* Another option is to compute four 8x8 variances, and pick a single
* lambda using a non-linear combination (e.g., the smallest, or second
* smallest, etc.).
*/
act = vp9_variance16x16(x->plane[0].src.buf, x->plane[0].src.stride,
VP9_VAR_OFFS, 0, &sse);
act <<= 4;
/* If the region is flat, lower the activity some more. */
if (act < 8 << 12)
act = act < 5 << 12 ? act : 5 << 12;
return act;
}
// Stub for alternative experimental activity measures.
static unsigned int alt_activity_measure(VP9_COMP *cpi, MACROBLOCK *x,
int use_dc_pred) {
return vp9_encode_intra(cpi, x, use_dc_pred);
}
DECLARE_ALIGNED(16, static const uint8_t, vp9_64x64_zeros[64*64]) = {0};
// Measure the activity of the current macroblock
// What we measure here is TBD so abstracted to this function
#define ALT_ACT_MEASURE 1
static unsigned int mb_activity_measure(VP9_COMP *cpi, MACROBLOCK *x,
int mb_row, int mb_col) {
unsigned int mb_activity;
if (ALT_ACT_MEASURE) {
int use_dc_pred = (mb_col || mb_row) && (!mb_col || !mb_row);
// Or use and alternative.
mb_activity = alt_activity_measure(cpi, x, use_dc_pred);
} else {
// Original activity measure from Tim T's code.
mb_activity = tt_activity_measure(cpi, x);
}
if (mb_activity < VP9_ACTIVITY_AVG_MIN)
mb_activity = VP9_ACTIVITY_AVG_MIN;
return mb_activity;
}
// Calculate an "average" mb activity value for the frame
#define ACT_MEDIAN 0
static void calc_av_activity(VP9_COMP *cpi, int64_t activity_sum) {
#if ACT_MEDIAN
// Find median: Simple n^2 algorithm for experimentation
{
unsigned int median;
unsigned int i, j;
unsigned int *sortlist;
unsigned int tmp;
// Create a list to sort to
CHECK_MEM_ERROR(&cpi->common, sortlist, vpx_calloc(sizeof(unsigned int),
cpi->common.MBs));
// Copy map to sort list
vpx_memcpy(sortlist, cpi->mb_activity_map,
sizeof(unsigned int) * cpi->common.MBs);
// Ripple each value down to its correct position
for (i = 1; i < cpi->common.MBs; i ++) {
for (j = i; j > 0; j --) {
if (sortlist[j] < sortlist[j - 1]) {
// Swap values
tmp = sortlist[j - 1];
sortlist[j - 1] = sortlist[j];
sortlist[j] = tmp;
} else
break;
}
}
// Even number MBs so estimate median as mean of two either side.
median = (1 + sortlist[cpi->common.MBs >> 1] +
sortlist[(cpi->common.MBs >> 1) + 1]) >> 1;
cpi->activity_avg = median;
vpx_free(sortlist);
}
#else
// Simple mean for now
cpi->activity_avg = (unsigned int) (activity_sum / cpi->common.MBs);
#endif
if (cpi->activity_avg < VP9_ACTIVITY_AVG_MIN)
cpi->activity_avg = VP9_ACTIVITY_AVG_MIN;
// Experimental code: return fixed value normalized for several clips
if (ALT_ACT_MEASURE)
cpi->activity_avg = 100000;
}
#define USE_ACT_INDEX 0
#define OUTPUT_NORM_ACT_STATS 0
#if USE_ACT_INDEX
// Calculate an activity index for each mb
static void calc_activity_index(VP9_COMP *cpi, MACROBLOCK *x) {
VP9_COMMON *const cm = &cpi->common;
int mb_row, mb_col;
int64_t act;
int64_t a;
int64_t b;
#if OUTPUT_NORM_ACT_STATS
FILE *f = fopen("norm_act.stt", "a");
fprintf(f, "\n%12d\n", cpi->activity_avg);
#endif
// Reset pointers to start of activity map
x->mb_activity_ptr = cpi->mb_activity_map;
// Calculate normalized mb activity number.
for (mb_row = 0; mb_row < cm->mb_rows; mb_row++) {
// for each macroblock col in image
for (mb_col = 0; mb_col < cm->mb_cols; mb_col++) {
// Read activity from the map
act = *(x->mb_activity_ptr);
// Calculate a normalized activity number
a = act + 4 * cpi->activity_avg;
b = 4 * act + cpi->activity_avg;
if (b >= a)
*(x->activity_ptr) = (int)((b + (a >> 1)) / a) - 1;
else
*(x->activity_ptr) = 1 - (int)((a + (b >> 1)) / b);
#if OUTPUT_NORM_ACT_STATS
fprintf(f, " %6d", *(x->mb_activity_ptr));
#endif
// Increment activity map pointers
x->mb_activity_ptr++;
}
#if OUTPUT_NORM_ACT_STATS
fprintf(f, "\n");
#endif
}
#if OUTPUT_NORM_ACT_STATS
fclose(f);
#endif
}
#endif
// Loop through all MBs. Note activity of each, average activity and
// calculate a normalized activity for each
static void build_activity_map(VP9_COMP *cpi) {
MACROBLOCK * const x = &cpi->mb;
MACROBLOCKD *xd = &x->e_mbd;
VP9_COMMON * const cm = &cpi->common;
#if ALT_ACT_MEASURE
YV12_BUFFER_CONFIG *new_yv12 = &cm->yv12_fb[cm->new_fb_idx];
int recon_yoffset;
int recon_y_stride = new_yv12->y_stride;
#endif
int mb_row, mb_col;
unsigned int mb_activity;
int64_t activity_sum = 0;
x->mb_activity_ptr = cpi->mb_activity_map;
// for each macroblock row in image
for (mb_row = 0; mb_row < cm->mb_rows; mb_row++) {
#if ALT_ACT_MEASURE
// reset above block coeffs
xd->up_available = (mb_row != 0);
recon_yoffset = (mb_row * recon_y_stride * 16);
#endif
// for each macroblock col in image
for (mb_col = 0; mb_col < cm->mb_cols; mb_col++) {
#if ALT_ACT_MEASURE
xd->plane[0].dst.buf = new_yv12->y_buffer + recon_yoffset;
xd->left_available = (mb_col != 0);
recon_yoffset += 16;
#endif
// measure activity
mb_activity = mb_activity_measure(cpi, x, mb_row, mb_col);
// Keep frame sum
activity_sum += mb_activity;
// Store MB level activity details.
*x->mb_activity_ptr = mb_activity;
// Increment activity map pointer
x->mb_activity_ptr++;
// adjust to the next column of source macroblocks
x->plane[0].src.buf += 16;
}
// adjust to the next row of mbs
x->plane[0].src.buf += 16 * x->plane[0].src.stride - 16 * cm->mb_cols;
}
// Calculate an "average" MB activity
calc_av_activity(cpi, activity_sum);
#if USE_ACT_INDEX
// Calculate an activity index number of each mb
calc_activity_index(cpi, x);
#endif
}
// Macroblock activity masking
void vp9_activity_masking(VP9_COMP *cpi, MACROBLOCK *x) {
#if USE_ACT_INDEX
x->rdmult += *(x->mb_activity_ptr) * (x->rdmult >> 2);
x->errorperbit = x->rdmult * 100 / (110 * x->rddiv);
x->errorperbit += (x->errorperbit == 0);
#else
int64_t a;
int64_t b;
int64_t act = *(x->mb_activity_ptr);
// Apply the masking to the RD multiplier.
a = act + (2 * cpi->activity_avg);
b = (2 * act) + cpi->activity_avg;
x->rdmult = (unsigned int) (((int64_t) x->rdmult * b + (a >> 1)) / a);
x->errorperbit = x->rdmult * 100 / (110 * x->rddiv);
x->errorperbit += (x->errorperbit == 0);
#endif
// Activity based Zbin adjustment
adjust_act_zbin(cpi, x);
}
2010-05-18 17:58:33 +02:00
static void update_state(VP9_COMP *cpi, PICK_MODE_CONTEXT *ctx,
BLOCK_SIZE_TYPE bsize, int output_enabled) {
int i, x_idx, y;
MACROBLOCK * const x = &cpi->mb;
MACROBLOCKD * const xd = &x->e_mbd;
MODE_INFO *mi = &ctx->mic;
MB_MODE_INFO * const mbmi = &xd->mode_info_context->mbmi;
int mb_mode_index = ctx->best_mode_index;
const int mis = cpi->common.mode_info_stride;
const int bh = 1 << mi_height_log2(bsize), bw = 1 << mi_width_log2(bsize);
assert(mi->mbmi.mode < MB_MODE_COUNT);
assert(mb_mode_index < MAX_MODES);
assert(mi->mbmi.ref_frame[0] < MAX_REF_FRAMES);
assert(mi->mbmi.ref_frame[1] < MAX_REF_FRAMES);
assert(mi->mbmi.sb_type == bsize);
// Restore the coding context of the MB to that that was in place
// when the mode was picked for it
for (y = 0; y < bh; y++) {
for (x_idx = 0; x_idx < bw; x_idx++) {
if ((xd->mb_to_right_edge >> (3 + LOG2_MI_SIZE)) + bw > x_idx
&& (xd->mb_to_bottom_edge >> (3 + LOG2_MI_SIZE)) + bh > y) {
MODE_INFO *mi_addr = xd->mode_info_context + x_idx + y * mis;
*mi_addr = *mi;
}
}
}
// FIXME(rbultje) I'm pretty sure this should go to the end of this block
// (i.e. after the output_enabled)
if (bsize < BLOCK_SIZE_SB32X32) {
if (bsize < BLOCK_SIZE_MB16X16)
ctx->txfm_rd_diff[ALLOW_16X16] = ctx->txfm_rd_diff[ALLOW_8X8];
32x32 transform for superblocks. This adds Debargha's DCT/DWT hybrid and a regular 32x32 DCT, and adds code all over the place to wrap that in the bitstream/encoder/decoder/RD. Some implementation notes (these probably need careful review): - token range is extended by 1 bit, since the value range out of this transform is [-16384,16383]. - the coefficients coming out of the FDCT are manually scaled back by 1 bit, or else they won't fit in int16_t (they are 17 bits). Because of this, the RD error scoring does not right-shift the MSE score by two (unlike for 4x4/8x8/16x16). - to compensate for this loss in precision, the quantizer is halved also. This is currently a little hacky. - FDCT and IDCT is double-only right now. Needs a fixed-point impl. - There are no default probabilities for the 32x32 transform yet; I'm simply using the 16x16 luma ones. A future commit will add newly generated probabilities for all transforms. - No ADST version. I don't think we'll add one for this level; if an ADST is desired, transform-size selection can scale back to 16x16 or lower, and use an ADST at that level. Additional notes specific to Debargha's DWT/DCT hybrid: - coefficient scale is different for the top/left 16x16 (DCT-over-DWT) block than for the rest (DWT pixel differences) of the block. Therefore, RD error scoring isn't easily scalable between coefficient and pixel domain. Thus, unfortunately, we need to compute the RD distortion in the pixel domain until we figure out how to scale these appropriately. Change-Id: I00386f20f35d7fabb19aba94c8162f8aee64ef2b
2012-12-07 23:45:05 +01:00
ctx->txfm_rd_diff[ALLOW_32X32] = ctx->txfm_rd_diff[ALLOW_16X16];
}
if (mbmi->ref_frame[0] != INTRA_FRAME && mbmi->sb_type < BLOCK_SIZE_SB8X8) {
*x->partition_info = ctx->partition_info;
mbmi->mv[0].as_int = x->partition_info->bmi[3].mv.as_int;
mbmi->mv[1].as_int = x->partition_info->bmi[3].second_mv.as_int;
}
x->skip = ctx->skip;
if (!output_enabled)
return;
if (!vp9_segfeature_active(&xd->seg, mbmi->segment_id, SEG_LVL_SKIP)) {
for (i = 0; i < NB_TXFM_MODES; i++) {
cpi->rd_tx_select_diff[i] += ctx->txfm_rd_diff[i];
}
}
if (cpi->common.frame_type == KEY_FRAME) {
// Restore the coding modes to that held in the coding context
// if (mb_mode == I4X4_PRED)
// for (i = 0; i < 16; i++)
// {
// xd->block[i].bmi.as_mode =
// xd->mode_info_context->bmi[i].as_mode;
// assert(xd->mode_info_context->bmi[i].as_mode < MB_MODE_COUNT);
// }
#if CONFIG_INTERNAL_STATS
static const int kf_mode_index[] = {
THR_DC /*DC_PRED*/,
THR_V_PRED /*V_PRED*/,
THR_H_PRED /*H_PRED*/,
THR_D45_PRED /*D45_PRED*/,
THR_D135_PRED /*D135_PRED*/,
THR_D117_PRED /*D117_PRED*/,
THR_D153_PRED /*D153_PRED*/,
THR_D27_PRED /*D27_PRED*/,
THR_D63_PRED /*D63_PRED*/,
THR_TM /*TM_PRED*/,
THR_B_PRED /*I4X4_PRED*/,
};
cpi->mode_chosen_counts[kf_mode_index[mi->mbmi.mode]]++;
#endif
} else {
// Note how often each mode chosen as best
cpi->mode_chosen_counts[mb_mode_index]++;
if (mbmi->ref_frame[0] != INTRA_FRAME
&& (mbmi->sb_type < BLOCK_SIZE_SB8X8 || mbmi->mode == NEWMV)) {
int_mv best_mv, best_second_mv;
const MV_REFERENCE_FRAME rf1 = mbmi->ref_frame[0];
const MV_REFERENCE_FRAME rf2 = mbmi->ref_frame[1];
best_mv.as_int = ctx->best_ref_mv.as_int;
best_second_mv.as_int = ctx->second_best_ref_mv.as_int;
if (mbmi->mode == NEWMV) {
best_mv.as_int = mbmi->ref_mvs[rf1][0].as_int;
best_second_mv.as_int = mbmi->ref_mvs[rf2][0].as_int;
}
mbmi->best_mv.as_int = best_mv.as_int;
mbmi->best_second_mv.as_int = best_second_mv.as_int;
vp9_update_nmv_count(cpi, x, &best_mv, &best_second_mv);
}
if (bsize > BLOCK_SIZE_SB8X8 && mbmi->mode == NEWMV) {
int i, j;
for (j = 0; j < bh; ++j)
for (i = 0; i < bw; ++i)
if ((xd->mb_to_right_edge >> (3 + LOG2_MI_SIZE)) + bw > i
&& (xd->mb_to_bottom_edge >> (3 + LOG2_MI_SIZE)) + bh > j)
xd->mode_info_context[mis * j + i].mbmi = *mbmi;
}
if (cpi->common.mcomp_filter_type == SWITCHABLE
&& is_inter_mode(mbmi->mode)) {
++cpi->common.fc.switchable_interp_count[
vp9_get_pred_context_switchable_interp(&cpi->common, xd)]
[vp9_switchable_interp_map[mbmi->interp_filter]];
}
cpi->rd_comp_pred_diff[SINGLE_PREDICTION_ONLY] += ctx->single_pred_diff;
cpi->rd_comp_pred_diff[COMP_PREDICTION_ONLY] += ctx->comp_pred_diff;
cpi->rd_comp_pred_diff[HYBRID_PREDICTION] += ctx->hybrid_pred_diff;
for (i = 0; i <= VP9_SWITCHABLE_FILTERS; i++) {
cpi->rd_filter_diff[i] += ctx->best_filter_diff[i];
}
}
}
void vp9_setup_src_planes(MACROBLOCK *x, const YV12_BUFFER_CONFIG *src,
int mb_row, int mb_col) {
uint8_t *buffers[4] = {src->y_buffer, src->u_buffer, src->v_buffer, src
->alpha_buffer};
int strides[4] = {src->y_stride, src->uv_stride, src->uv_stride, src
->alpha_stride};
int i;
for (i = 0; i < MAX_MB_PLANE; i++) {
setup_pred_plane(&x->plane[i].src, buffers[i], strides[i], mb_row, mb_col,
NULL, x->e_mbd.plane[i].subsampling_x,
x->e_mbd.plane[i].subsampling_y);
}
}
static void set_offsets(VP9_COMP *cpi, int mi_row, int mi_col,
BLOCK_SIZE_TYPE bsize) {
MACROBLOCK * const x = &cpi->mb;
VP9_COMMON * const cm = &cpi->common;
MACROBLOCKD * const xd = &x->e_mbd;
MB_MODE_INFO *mbmi;
const int dst_fb_idx = cm->new_fb_idx;
const int idx_str = xd->mode_info_stride * mi_row + mi_col;
const int bw = 1 << mi_width_log2(bsize), bh = 1 << mi_height_log2(bsize);
const int mb_row = mi_row >> 1;
const int mb_col = mi_col >> 1;
const int idx_map = mb_row * cm->mb_cols + mb_col;
int i;
// entropy context structures
for (i = 0; i < MAX_MB_PLANE; i++) {
xd->plane[i].above_context = cm->above_context[i]
+ (mi_col * 2 >> xd->plane[i].subsampling_x);
xd->plane[i].left_context = cm->left_context[i]
+ (((mi_row * 2) & 15) >> xd->plane[i].subsampling_y);
}
// partition contexts
set_partition_seg_context(cm, xd, mi_row, mi_col);
// Activity map pointer
x->mb_activity_ptr = &cpi->mb_activity_map[idx_map];
x->active_ptr = cpi->active_map + idx_map;
/* pointers to mode info contexts */
x->partition_info = x->pi + idx_str;
xd->mode_info_context = cm->mi + idx_str;
mbmi = &xd->mode_info_context->mbmi;
// Special case: if prev_mi is NULL, the previous mode info context
// cannot be used.
xd->prev_mode_info_context = cm->prev_mi ? cm->prev_mi + idx_str : NULL;
// Set up destination pointers
setup_dst_planes(xd, &cm->yv12_fb[dst_fb_idx], mi_row, mi_col);
/* Set up limit values for MV components to prevent them from
* extending beyond the UMV borders assuming 16x16 block size */
x->mv_row_min = -((mi_row * MI_SIZE)+ VP9BORDERINPIXELS - VP9_INTERP_EXTEND);
x->mv_col_min = -((mi_col * MI_SIZE)+ VP9BORDERINPIXELS - VP9_INTERP_EXTEND);
x->mv_row_max = ((cm->mi_rows - mi_row) * MI_SIZE
+ (VP9BORDERINPIXELS - MI_SIZE * bh - VP9_INTERP_EXTEND));
x->mv_col_max = ((cm->mi_cols - mi_col) * MI_SIZE
+ (VP9BORDERINPIXELS - MI_SIZE * bw - VP9_INTERP_EXTEND));
// Set up distance of MB to edge of frame in 1/8th pel units
assert(!(mi_col & (bw - 1)) && !(mi_row & (bh - 1)));
set_mi_row_col(cm, xd, mi_row, bh, mi_col, bw);
/* set up source buffers */
vp9_setup_src_planes(x, cpi->Source, mi_row, mi_col);
/* R/D setup */
x->rddiv = cpi->RDDIV;
x->rdmult = cpi->RDMULT;
/* segment ID */
if (xd->seg.enabled) {
uint8_t *map = xd->seg.update_map ? cpi->segmentation_map
: cm->last_frame_seg_map;
mbmi->segment_id = vp9_get_segment_id(cm, map, bsize, mi_row, mi_col);
vp9_mb_init_quantizer(cpi, x);
if (xd->seg.enabled && cpi->seg0_cnt > 0
&& !vp9_segfeature_active(&xd->seg, 0, SEG_LVL_REF_FRAME)
&& vp9_segfeature_active(&xd->seg, 1, SEG_LVL_REF_FRAME)) {
cpi->seg0_progress = (cpi->seg0_idx << 16) / cpi->seg0_cnt;
} else {
const int y = mb_row & ~3;
const int x = mb_col & ~3;
const int p16 = ((mb_row & 1) << 1) + (mb_col & 1);
const int p32 = ((mb_row & 2) << 2) + ((mb_col & 2) << 1);
const int tile_progress = cm->cur_tile_mi_col_start * cm->mb_rows >> 1;
const int mb_cols = (cm->cur_tile_mi_col_end - cm->cur_tile_mi_col_start)
>> 1;
cpi->seg0_progress = ((y * mb_cols + x * 4 + p32 + p16 + tile_progress)
<< 16) / cm->MBs;
}
} else {
mbmi->segment_id = 0;
}
}
static void pick_sb_modes(VP9_COMP *cpi, int mi_row, int mi_col,
int *totalrate, int64_t *totaldist,
BLOCK_SIZE_TYPE bsize, PICK_MODE_CONTEXT *ctx) {
VP9_COMMON *const cm = &cpi->common;
MACROBLOCK *const x = &cpi->mb;
MACROBLOCKD *const xd = &x->e_mbd;
x->rd_search = 1;
if (bsize < BLOCK_SIZE_SB8X8)
if (xd->ab_index != 0)
return;
set_offsets(cpi, mi_row, mi_col, bsize);
xd->mode_info_context->mbmi.sb_type = bsize;
if (cpi->oxcf.tuning == VP8_TUNE_SSIM)
vp9_activity_masking(cpi, x);
// Find best coding mode & reconstruct the MB so it is available
// as a predictor for MBs that follow in the SB
if (cm->frame_type == KEY_FRAME)
vp9_rd_pick_intra_mode_sb(cpi, x, totalrate, totaldist, bsize, ctx);
else
vp9_rd_pick_inter_mode_sb(cpi, x, mi_row, mi_col, totalrate, totaldist,
bsize, ctx);
}
static void update_stats(VP9_COMP *cpi, int mi_row, int mi_col) {
VP9_COMMON * const cm = &cpi->common;
MACROBLOCK * const x = &cpi->mb;
MACROBLOCKD * const xd = &x->e_mbd;
MODE_INFO *mi = xd->mode_info_context;
MB_MODE_INFO * const mbmi = &mi->mbmi;
if (cm->frame_type != KEY_FRAME) {
const int seg_ref_active = vp9_segfeature_active(&xd->seg, mbmi->segment_id,
SEG_LVL_REF_FRAME);
if (!seg_ref_active)
cpi->intra_inter_count[vp9_get_pred_context_intra_inter(cm, xd)][mbmi
->ref_frame[0] > INTRA_FRAME]++;
// If the segment reference feature is enabled we have only a single
// reference frame allowed for the segment so exclude it from
// the reference frame counts used to work out probabilities.
if ((mbmi->ref_frame[0] > INTRA_FRAME) && !seg_ref_active) {
if (cm->comp_pred_mode == HYBRID_PREDICTION)
cpi->comp_inter_count[vp9_get_pred_context_comp_inter_inter(cm, xd)]
[mbmi->ref_frame[1] > INTRA_FRAME]++;
if (mbmi->ref_frame[1] > INTRA_FRAME) {
cpi->comp_ref_count[vp9_get_pred_context_comp_ref_p(cm, xd)][mbmi
->ref_frame[0] == GOLDEN_FRAME]++;
} else {
cpi->single_ref_count[vp9_get_pred_context_single_ref_p1(cm, xd)]
[0][mbmi->ref_frame[0] != LAST_FRAME]++;
if (mbmi->ref_frame[0] != LAST_FRAME)
cpi->single_ref_count[vp9_get_pred_context_single_ref_p2(cm, xd)][1]
[mbmi->ref_frame[0] != GOLDEN_FRAME]++;
}
}
// Count of last ref frame 0,0 usage
if ((mbmi->mode == ZEROMV) && (mbmi->ref_frame[0] == LAST_FRAME))
cpi->inter_zz_count++;
}
}
2010-05-18 17:58:33 +02:00
// TODO(jingning): the variables used here are little complicated. need further
// refactoring on organizing the the temporary buffers, when recursive
// partition down to 4x4 block size is enabled.
static PICK_MODE_CONTEXT *get_block_context(MACROBLOCK *x,
BLOCK_SIZE_TYPE bsize) {
MACROBLOCKD * const xd = &x->e_mbd;
switch (bsize) {
case BLOCK_SIZE_SB64X64:
return &x->sb64_context;
case BLOCK_SIZE_SB64X32:
return &x->sb64x32_context[xd->sb_index];
case BLOCK_SIZE_SB32X64:
return &x->sb32x64_context[xd->sb_index];
case BLOCK_SIZE_SB32X32:
return &x->sb32_context[xd->sb_index];
case BLOCK_SIZE_SB32X16:
return &x->sb32x16_context[xd->sb_index][xd->mb_index];
case BLOCK_SIZE_SB16X32:
return &x->sb16x32_context[xd->sb_index][xd->mb_index];
case BLOCK_SIZE_MB16X16:
return &x->mb_context[xd->sb_index][xd->mb_index];
case BLOCK_SIZE_SB16X8:
return &x->sb16x8_context[xd->sb_index][xd->mb_index][xd->b_index];
case BLOCK_SIZE_SB8X16:
return &x->sb8x16_context[xd->sb_index][xd->mb_index][xd->b_index];
case BLOCK_SIZE_SB8X8:
return &x->sb8x8_context[xd->sb_index][xd->mb_index][xd->b_index];
case BLOCK_SIZE_SB8X4:
return &x->sb8x4_context[xd->sb_index][xd->mb_index][xd->b_index];
case BLOCK_SIZE_SB4X8:
return &x->sb4x8_context[xd->sb_index][xd->mb_index][xd->b_index];
case BLOCK_SIZE_AB4X4:
return &x->ab4x4_context[xd->sb_index][xd->mb_index][xd->b_index];
default:
assert(0);
return NULL ;
}
}
static BLOCK_SIZE_TYPE *get_sb_partitioning(MACROBLOCK *x,
BLOCK_SIZE_TYPE bsize) {
MACROBLOCKD *xd = &x->e_mbd;
switch (bsize) {
case BLOCK_SIZE_SB64X64:
return &x->sb64_partitioning;
case BLOCK_SIZE_SB32X32:
return &x->sb_partitioning[xd->sb_index];
case BLOCK_SIZE_MB16X16:
return &x->mb_partitioning[xd->sb_index][xd->mb_index];
case BLOCK_SIZE_SB8X8:
return &x->b_partitioning[xd->sb_index][xd->mb_index][xd->b_index];
default:
assert(0);
return NULL ;
}
}
static void restore_context(VP9_COMP *cpi, int mi_row, int mi_col,
ENTROPY_CONTEXT a[16 * MAX_MB_PLANE],
ENTROPY_CONTEXT l[16 * MAX_MB_PLANE],
PARTITION_CONTEXT sa[8], PARTITION_CONTEXT sl[8],
BLOCK_SIZE_TYPE bsize) {
VP9_COMMON * const cm = &cpi->common;
MACROBLOCK * const x = &cpi->mb;
MACROBLOCKD * const xd = &x->e_mbd;
int p;
int bwl = b_width_log2(bsize), bw = 1 << bwl;
int bhl = b_height_log2(bsize), bh = 1 << bhl;
int mwl = mi_width_log2(bsize), mw = 1 << mwl;
int mhl = mi_height_log2(bsize), mh = 1 << mhl;
for (p = 0; p < MAX_MB_PLANE; p++) {
vpx_memcpy(
cm->above_context[p] + ((mi_col * 2) >> xd->plane[p].subsampling_x),
a + bw * p, sizeof(ENTROPY_CONTEXT) * bw >> xd->plane[p].subsampling_x);
vpx_memcpy(
cm->left_context[p]
+ ((mi_row & MI_MASK)* 2 >> xd->plane[p].subsampling_y),l + bh * p,
sizeof(ENTROPY_CONTEXT) * bh >> xd->plane[p].subsampling_y);
}
vpx_memcpy(cm->above_seg_context + mi_col, sa,
sizeof(PARTITION_CONTEXT) * mw);
vpx_memcpy(cm->left_seg_context + (mi_row & MI_MASK), sl,
sizeof(PARTITION_CONTEXT) * mh);
}
static void save_context(VP9_COMP *cpi, int mi_row, int mi_col,
ENTROPY_CONTEXT a[16 * MAX_MB_PLANE],
ENTROPY_CONTEXT l[16 * MAX_MB_PLANE],
PARTITION_CONTEXT sa[8], PARTITION_CONTEXT sl[8],
BLOCK_SIZE_TYPE bsize) {
VP9_COMMON * const cm = &cpi->common;
MACROBLOCK * const x = &cpi->mb;
MACROBLOCKD * const xd = &x->e_mbd;
int p;
int bwl = b_width_log2(bsize), bw = 1 << bwl;
int bhl = b_height_log2(bsize), bh = 1 << bhl;
int mwl = mi_width_log2(bsize), mw = 1 << mwl;
int mhl = mi_height_log2(bsize), mh = 1 << mhl;
// buffer the above/left context information of the block in search.
for (p = 0; p < MAX_MB_PLANE; ++p) {
vpx_memcpy(
a + bw * p,
cm->above_context[p] + (mi_col * 2 >> xd->plane[p].subsampling_x),
sizeof(ENTROPY_CONTEXT) * bw >> xd->plane[p].subsampling_x);
vpx_memcpy(
l + bh * p,
cm->left_context[p]
+ ((mi_row & MI_MASK)* 2 >> xd->plane[p].subsampling_y),sizeof(ENTROPY_CONTEXT) * bh >> xd->plane[p].subsampling_y);
}
vpx_memcpy(sa, cm->above_seg_context + mi_col,
sizeof(PARTITION_CONTEXT) * mw);
vpx_memcpy(sl, cm->left_seg_context + (mi_row & MI_MASK),
sizeof(PARTITION_CONTEXT) * mh)
;}
static void encode_b(VP9_COMP *cpi, TOKENEXTRA **tp, int mi_row, int mi_col,
int output_enabled, BLOCK_SIZE_TYPE bsize, int sub_index) {
VP9_COMMON * const cm = &cpi->common;
MACROBLOCK * const x = &cpi->mb;
MACROBLOCKD * const xd = &x->e_mbd;
2010-05-18 17:58:33 +02:00
if (mi_row >= cm->mi_rows || mi_col >= cm->mi_cols)
return;
2010-05-18 17:58:33 +02:00
if (sub_index != -1)
*(get_sb_index(xd, bsize)) = sub_index;
if (bsize < BLOCK_SIZE_SB8X8)
if (xd->ab_index > 0)
return;
set_offsets(cpi, mi_row, mi_col, bsize);
update_state(cpi, get_block_context(x, bsize), bsize, output_enabled);
encode_superblock(cpi, tp, output_enabled, mi_row, mi_col, bsize);
2010-05-18 17:58:33 +02:00
if (output_enabled) {
update_stats(cpi, mi_row, mi_col);
(*tp)->token = EOSB_TOKEN;
(*tp)++;
}
}
static void encode_sb(VP9_COMP *cpi, TOKENEXTRA **tp, int mi_row, int mi_col,
int output_enabled, BLOCK_SIZE_TYPE bsize) {
VP9_COMMON * const cm = &cpi->common;
MACROBLOCK * const x = &cpi->mb;
MACROBLOCKD * const xd = &x->e_mbd;
BLOCK_SIZE_TYPE c1 = BLOCK_SIZE_SB8X8;
const int bsl = b_width_log2(bsize), bs = (1 << bsl) / 4;
int bwl, bhl;
int UNINITIALIZED_IS_SAFE(pl);
if (mi_row >= cm->mi_rows || mi_col >= cm->mi_cols)
return;
c1 = BLOCK_SIZE_AB4X4;
if (bsize >= BLOCK_SIZE_SB8X8) {
set_partition_seg_context(cm, xd, mi_row, mi_col);
pl = partition_plane_context(xd, bsize);
c1 = *(get_sb_partitioning(x, bsize));
}
bwl = b_width_log2(c1), bhl = b_height_log2(c1);
if (bsl == bwl && bsl == bhl) {
if (output_enabled && bsize >= BLOCK_SIZE_SB8X8)
cpi->partition_count[pl][PARTITION_NONE]++;
encode_b(cpi, tp, mi_row, mi_col, output_enabled, c1, -1);
} else if (bsl == bhl && bsl > bwl) {
if (output_enabled)
cpi->partition_count[pl][PARTITION_VERT]++;
encode_b(cpi, tp, mi_row, mi_col, output_enabled, c1, 0);
encode_b(cpi, tp, mi_row, mi_col + bs, output_enabled, c1, 1);
} else if (bsl == bwl && bsl > bhl) {
if (output_enabled)
cpi->partition_count[pl][PARTITION_HORZ]++;
encode_b(cpi, tp, mi_row, mi_col, output_enabled, c1, 0);
encode_b(cpi, tp, mi_row + bs, mi_col, output_enabled, c1, 1);
} else {
BLOCK_SIZE_TYPE subsize;
int i;
assert(bwl < bsl && bhl < bsl);
subsize = get_subsize(bsize, PARTITION_SPLIT);
if (output_enabled)
cpi->partition_count[pl][PARTITION_SPLIT]++;
for (i = 0; i < 4; i++) {
const int x_idx = i & 1, y_idx = i >> 1;
*(get_sb_index(xd, subsize)) = i;
encode_sb(cpi, tp, mi_row + y_idx * bs, mi_col + x_idx * bs,
output_enabled, subsize);
}
}
if (bsize >= BLOCK_SIZE_SB8X8
&& (bsize == BLOCK_SIZE_SB8X8 || bsl == bwl || bsl == bhl)) {
set_partition_seg_context(cm, xd, mi_row, mi_col);
update_partition_context(xd, c1, bsize);
}
}
2010-05-18 17:58:33 +02:00
static void set_partitioning(VP9_COMP *cpi, MODE_INFO *m,
BLOCK_SIZE_TYPE bsize) {
VP9_COMMON *const cm = &cpi->common;
const int mis = cm->mode_info_stride;
int block_row, block_col;
for (block_row = 0; block_row < 8; ++block_row) {
for (block_col = 0; block_col < 8; ++block_col) {
m[block_row * mis + block_col].mbmi.sb_type = bsize;
}
}
}
static void copy_partitioning(VP9_COMP *cpi, MODE_INFO *m, MODE_INFO *p) {
VP9_COMMON *const cm = &cpi->common;
const int mis = cm->mode_info_stride;
int block_row, block_col;
for (block_row = 0; block_row < 8; ++block_row) {
for (block_col = 0; block_col < 8; ++block_col) {
m[block_row * mis + block_col].mbmi.sb_type =
p[block_row * mis + block_col].mbmi.sb_type;
}
}
}
static void set_block_size(VP9_COMMON * const cm, MODE_INFO *m,
BLOCK_SIZE_TYPE bsize, int mis, int mi_row,
int mi_col) {
int row, col;
int bwl = b_width_log2(bsize);
int bhl = b_height_log2(bsize);
int bsl = (bwl > bhl ? bwl : bhl);
int bs = (1 << bsl) / 2; //
MODE_INFO *m2 = m + mi_row * mis + mi_col;
for (row = 0; row < bs; row++) {
for (col = 0; col < bs; col++) {
if (mi_row + row >= cm->mi_rows || mi_col + col >= cm->mi_cols)
continue;
m2[row * mis + col].mbmi.sb_type = bsize;
}
}
}
typedef struct {
int64_t sum_square_error;
int64_t sum_error;
int count;
int variance;
} var;
typedef struct {
var none;
var horz[2];
var vert[2];
} partition_variance;
#define VT(TYPE, BLOCKSIZE) \
typedef struct { \
partition_variance vt; \
BLOCKSIZE split[4]; } TYPE;
VT(v8x8, var)
VT(v16x16, v8x8)
VT(v32x32, v16x16)
VT(v64x64, v32x32)
typedef struct {
partition_variance *vt;
var *split[4];
} vt_node;
typedef enum {
V16X16,
V32X32,
V64X64,
} TREE_LEVEL;
static void tree_to_node(void *data, BLOCK_SIZE_TYPE block_size, vt_node *node) {
int i;
switch (block_size) {
case BLOCK_SIZE_SB64X64: {
v64x64 *vt = (v64x64 *) data;
node->vt = &vt->vt;
for (i = 0; i < 4; i++)
node->split[i] = &vt->split[i].vt.none;
break;
}
case BLOCK_SIZE_SB32X32: {
v32x32 *vt = (v32x32 *) data;
node->vt = &vt->vt;
for (i = 0; i < 4; i++)
node->split[i] = &vt->split[i].vt.none;
break;
}
case BLOCK_SIZE_MB16X16: {
v16x16 *vt = (v16x16 *) data;
node->vt = &vt->vt;
for (i = 0; i < 4; i++)
node->split[i] = &vt->split[i].vt.none;
break;
}
case BLOCK_SIZE_SB8X8: {
v8x8 *vt = (v8x8 *) data;
node->vt = &vt->vt;
for (i = 0; i < 4; i++)
node->split[i] = &vt->split[i];
break;
}
default:
node->vt = 0;
for (i = 0; i < 4; i++)
node->split[i] = 0;
assert(-1);
}
}
// Set variance values given sum square error, sum error, count.
static void fill_variance(var *v, int64_t s2, int64_t s, int c) {
v->sum_square_error = s2;
v->sum_error = s;
v->count = c;
if (c > 0)
v->variance = 256
* (v->sum_square_error - v->sum_error * v->sum_error / v->count)
/ v->count;
else
v->variance = 0;
}
// Combine 2 variance structures by summing the sum_error, sum_square_error,
// and counts and then calculating the new variance.
void sum_2_variances(var *r, var *a, var*b) {
fill_variance(r, a->sum_square_error + b->sum_square_error,
a->sum_error + b->sum_error, a->count + b->count);
}
static void fill_variance_tree(void *data, BLOCK_SIZE_TYPE block_size) {
vt_node node;
tree_to_node(data, block_size, &node);
sum_2_variances(&node.vt->horz[0], node.split[0], node.split[1]);
sum_2_variances(&node.vt->horz[1], node.split[2], node.split[3]);
sum_2_variances(&node.vt->vert[0], node.split[0], node.split[2]);
sum_2_variances(&node.vt->vert[1], node.split[1], node.split[3]);
sum_2_variances(&node.vt->none, &node.vt->vert[0], &node.vt->vert[1]);
}
#if PERFORM_RANDOM_PARTITIONING
static int set_vt_partitioning(VP9_COMP *cpi, void *data, MODE_INFO *m,
BLOCK_SIZE_TYPE block_size, int mi_row,
int mi_col, int mi_size) {
VP9_COMMON * const cm = &cpi->common;
vt_node vt;
const int mis = cm->mode_info_stride;
int64_t threshold = 4 * cpi->common.base_qindex * cpi->common.base_qindex;
tree_to_node(data, block_size, &vt);
// split none is available only if we have more than half a block size
// in width and height inside the visible image
if (mi_col + mi_size < cm->mi_cols && mi_row + mi_size < cm->mi_rows &&
(rand() & 3) < 1) {
set_block_size(cm, m, block_size, mis, mi_row, mi_col);
return 1;
}
// vertical split is available on all but the bottom border
if (mi_row + mi_size < cm->mi_rows && vt.vt->vert[0].variance < threshold
&& (rand() & 3) < 1) {
set_block_size(cm, m, get_subsize(block_size, PARTITION_VERT), mis, mi_row,
mi_col);
return 1;
}
// horizontal split is available on all but the right border
if (mi_col + mi_size < cm->mi_cols && vt.vt->horz[0].variance < threshold
&& (rand() & 3) < 1) {
set_block_size(cm, m, get_subsize(block_size, PARTITION_HORZ), mis, mi_row,
mi_col);
return 1;
}
return 0;
}
#else
static int set_vt_partitioning(VP9_COMP *cpi, void *data, MODE_INFO *m,
BLOCK_SIZE_TYPE block_size, int mi_row,
int mi_col, int mi_size) {
VP9_COMMON * const cm = &cpi->common;
vt_node vt;
const int mis = cm->mode_info_stride;
int64_t threshold = 50 * cpi->common.base_qindex;
tree_to_node(data, block_size, &vt);
// split none is available only if we have more than half a block size
// in width and height inside the visible image
if (mi_col + mi_size < cm->mi_cols && mi_row + mi_size < cm->mi_rows
&& vt.vt->none.variance < threshold) {
set_block_size(cm, m, block_size, mis, mi_row, mi_col);
return 1;
}
// vertical split is available on all but the bottom border
if (mi_row + mi_size < cm->mi_rows && vt.vt->vert[0].variance < threshold
&& vt.vt->vert[1].variance < threshold) {
set_block_size(cm, m, get_subsize(block_size, PARTITION_VERT), mis, mi_row,
mi_col);
return 1;
}
// horizontal split is available on all but the right border
if (mi_col + mi_size < cm->mi_cols && vt.vt->horz[0].variance < threshold
&& vt.vt->horz[1].variance < threshold) {
set_block_size(cm, m, get_subsize(block_size, PARTITION_HORZ), mis, mi_row,
mi_col);
return 1;
}
return 0;
}
#endif
static void choose_partitioning(VP9_COMP *cpi, MODE_INFO *m, int mi_row,
int mi_col) {
VP9_COMMON * const cm = &cpi->common;
MACROBLOCK *x = &cpi->mb;
MACROBLOCKD *xd = &cpi->mb.e_mbd;
const int mis = cm->mode_info_stride;
// TODO(JBB): More experimentation or testing of this threshold;
int64_t threshold = 4;
int i, j, k;
v64x64 vt;
unsigned char * s;
int sp;
const unsigned char * d;
int dp;
int pixels_wide = 64, pixels_high = 64;
vpx_memset(&vt, 0, sizeof(vt));
set_offsets(cpi, mi_row, mi_col, BLOCK_SIZE_SB64X64);
if (xd->mb_to_right_edge < 0)
pixels_wide += (xd->mb_to_right_edge >> 3);
if (xd->mb_to_bottom_edge < 0)
pixels_high += (xd->mb_to_bottom_edge >> 3);
s = x->plane[0].src.buf;
sp = x->plane[0].src.stride;
// TODO(JBB): Clearly the higher the quantizer the fewer partitions we want
// but this needs more experimentation.
threshold = threshold * cpi->common.base_qindex * cpi->common.base_qindex;
d = vp9_64x64_zeros;
dp = 64;
if (cm->frame_type != KEY_FRAME) {
int_mv nearest_mv, near_mv;
YV12_BUFFER_CONFIG *ref_fb = &cm->yv12_fb[0];
YV12_BUFFER_CONFIG *second_ref_fb = NULL;
setup_pre_planes(xd, 0, ref_fb, mi_row, mi_col,
&xd->scale_factor[0], &xd->scale_factor_uv[0]);
setup_pre_planes(xd, 1, second_ref_fb, mi_row, mi_col,
&xd->scale_factor[1], &xd->scale_factor_uv[1]);
xd->mode_info_context->mbmi.ref_frame[0] = LAST_FRAME;
xd->mode_info_context->mbmi.sb_type = BLOCK_SIZE_SB64X64;
vp9_find_best_ref_mvs(xd, m->mbmi.ref_mvs[m->mbmi.ref_frame[0]],
&nearest_mv, &near_mv);
xd->mode_info_context->mbmi.mv[0] = nearest_mv;
vp9_build_inter_predictors_sby(xd, mi_row, mi_col, BLOCK_SIZE_SB64X64);
d = xd->plane[0].dst.buf;
dp = xd->plane[0].dst.stride;
}
// Fill in the entire tree of 8x8 variances for splits.
for (i = 0; i < 4; i++) {
const int x32_idx = ((i & 1) << 5);
const int y32_idx = ((i >> 1) << 5);
for (j = 0; j < 4; j++) {
const int x16_idx = x32_idx + ((j & 1) << 4);
const int y16_idx = y32_idx + ((j >> 1) << 4);
v16x16 *vst = &vt.split[i].split[j];
for (k = 0; k < 4; k++) {
int x_idx = x16_idx + ((k & 1) << 3);
int y_idx = y16_idx + ((k >> 1) << 3);
unsigned int sse = 0;
int sum = 0;
if (x_idx < pixels_wide && y_idx < pixels_high)
vp9_get_sse_sum_8x8(s + y_idx * sp + x_idx, sp,
d + y_idx * dp + x_idx, dp, &sse, &sum);
fill_variance(&vst->split[k].vt.none, sse, sum, 64);
}
}
}
// Fill the rest of the variance tree by summing the split partition
// values.
for (i = 0; i < 4; i++) {
for (j = 0; j < 4; j++) {
fill_variance_tree(&vt.split[i].split[j], BLOCK_SIZE_MB16X16);
}
fill_variance_tree(&vt.split[i], BLOCK_SIZE_SB32X32);
}
fill_variance_tree(&vt, BLOCK_SIZE_SB64X64);
// Now go through the entire structure, splitting every block size until
// we get to one that's got a variance lower than our threshold, or we
// hit 8x8.
if (!set_vt_partitioning(cpi, &vt, m, BLOCK_SIZE_SB64X64, mi_row, mi_col,
4)) {
for (i = 0; i < 4; ++i) {
const int x32_idx = ((i & 1) << 2);
const int y32_idx = ((i >> 1) << 2);
if (!set_vt_partitioning(cpi, &vt.split[i], m, BLOCK_SIZE_SB32X32,
(mi_row + y32_idx), (mi_col + x32_idx), 2)) {
for (j = 0; j < 4; ++j) {
const int x16_idx = ((j & 1) << 1);
const int y16_idx = ((j >> 1) << 1);
if (!set_vt_partitioning(cpi, &vt.split[i].split[j], m,
BLOCK_SIZE_MB16X16,
(mi_row + y32_idx + y16_idx),
(mi_col + x32_idx + x16_idx), 1)) {
for (k = 0; k < 4; ++k) {
const int x8_idx = (k & 1);
const int y8_idx = (k >> 1);
set_block_size(cm, m, BLOCK_SIZE_SB8X8, mis,
(mi_row + y32_idx + y16_idx + y8_idx),
(mi_col + x32_idx + x16_idx + x8_idx));
}
}
}
}
}
}
}
static void rd_use_partition(VP9_COMP *cpi, MODE_INFO *m, TOKENEXTRA **tp,
int mi_row, int mi_col, BLOCK_SIZE_TYPE bsize,
int *rate, int64_t *dist, int do_recon) {
VP9_COMMON * const cm = &cpi->common;
MACROBLOCK * const x = &cpi->mb;
MACROBLOCKD *xd = &cpi->mb.e_mbd;
const int mis = cm->mode_info_stride;
int bwl = b_width_log2(m->mbmi.sb_type);
int bhl = b_height_log2(m->mbmi.sb_type);
int bsl = b_width_log2(bsize);
int bs = (1 << bsl);
int bh = (1 << bhl);
int ms = bs / 2;
int mh = bh / 2;
int bss = (1 << bsl) / 4;
int i, pl;
PARTITION_TYPE partition = PARTITION_NONE;
BLOCK_SIZE_TYPE subsize;
ENTROPY_CONTEXT l[16 * MAX_MB_PLANE], a[16 * MAX_MB_PLANE];
PARTITION_CONTEXT sl[8], sa[8];
int last_part_rate = INT_MAX;
int64_t last_part_dist = INT_MAX;
int split_rate = INT_MAX;
int64_t split_dist = INT_MAX;
int none_rate = INT_MAX;
int64_t none_dist = INT_MAX;
int chosen_rate = INT_MAX;
int64_t chosen_dist = INT_MAX;
BLOCK_SIZE_TYPE sub_subsize = BLOCK_SIZE_AB4X4;
int splits_below = 0;
BLOCK_SIZE_TYPE bs_type = m->mbmi.sb_type;
if (mi_row >= cm->mi_rows || mi_col >= cm->mi_cols)
return;
// parse the partition type
if ((bwl == bsl) && (bhl == bsl))
partition = PARTITION_NONE;
else if ((bwl == bsl) && (bhl < bsl))
partition = PARTITION_HORZ;
else if ((bwl < bsl) && (bhl == bsl))
partition = PARTITION_VERT;
else if ((bwl < bsl) && (bhl < bsl))
partition = PARTITION_SPLIT;
else
assert(0);
subsize = get_subsize(bsize, partition);
if (bsize < BLOCK_SIZE_SB8X8) {
if (xd->ab_index != 0) {
*rate = 0;
*dist = 0;
return;
}
} else {
*(get_sb_partitioning(x, bsize)) = subsize;
}
save_context(cpi, mi_row, mi_col, a, l, sa, sl, bsize);
if (cpi->sf.adjust_partitioning_from_last_frame) {
// Check if any of the sub blocks are further split.
if (partition == PARTITION_SPLIT && subsize > BLOCK_SIZE_SB8X8) {
sub_subsize = get_subsize(subsize, PARTITION_SPLIT);
splits_below = 1;
for (i = 0; i < 4; i++) {
int jj = i >> 1, ii = i & 0x01;
if (m[jj * bss * mis + ii * bss].mbmi.sb_type >= sub_subsize) {
splits_below = 0;
}
}
}
// If partition is not none try none unless each of the 4 splits are split
// even further..
if (partition != PARTITION_NONE && !splits_below &&
mi_row + (ms >> 1) < cm->mi_rows &&
mi_col + (ms >> 1) < cm->mi_cols) {
*(get_sb_partitioning(x, bsize)) = bsize;
pick_sb_modes(cpi, mi_row, mi_col, &none_rate, &none_dist, bsize,
get_block_context(x, bsize));
set_partition_seg_context(cm, xd, mi_row, mi_col);
pl = partition_plane_context(xd, bsize);
none_rate += x->partition_cost[pl][PARTITION_NONE];
restore_context(cpi, mi_row, mi_col, a, l, sa, sl, bsize);
m->mbmi.sb_type = bs_type;
*(get_sb_partitioning(x, bsize)) = subsize;
}
}
switch (partition) {
case PARTITION_NONE:
pick_sb_modes(cpi, mi_row, mi_col, &last_part_rate, &last_part_dist,
bsize, get_block_context(x, bsize));
set_partition_seg_context(cm, xd, mi_row, mi_col);
pl = partition_plane_context(xd, bsize);
last_part_rate += x->partition_cost[pl][PARTITION_NONE];
break;
case PARTITION_HORZ:
*(get_sb_index(xd, subsize)) = 0;
pick_sb_modes(cpi, mi_row, mi_col, &last_part_rate, &last_part_dist,
subsize, get_block_context(x, subsize));
if (bsize >= BLOCK_SIZE_SB8X8 && mi_row + (mh >> 1) < cm->mi_rows) {
int rt = 0;
int64_t dt = 0;
update_state(cpi, get_block_context(x, subsize), subsize, 0);
encode_superblock(cpi, tp, 0, mi_row, mi_col, subsize);
*(get_sb_index(xd, subsize)) = 1;
pick_sb_modes(cpi, mi_row + (ms >> 1), mi_col, &rt, &dt, subsize,
get_block_context(x, subsize));
last_part_rate += rt;
last_part_dist += dt;
}
set_partition_seg_context(cm, xd, mi_row, mi_col);
pl = partition_plane_context(xd, bsize);
last_part_rate += x->partition_cost[pl][PARTITION_HORZ];
break;
case PARTITION_VERT:
*(get_sb_index(xd, subsize)) = 0;
pick_sb_modes(cpi, mi_row, mi_col, &last_part_rate, &last_part_dist,
subsize, get_block_context(x, subsize));
if (bsize >= BLOCK_SIZE_SB8X8 && mi_col + (ms >> 1) < cm->mi_cols) {
int rt = 0;
int64_t dt = 0;
update_state(cpi, get_block_context(x, subsize), subsize, 0);
encode_superblock(cpi, tp, 0, mi_row, mi_col, subsize);
*(get_sb_index(xd, subsize)) = 1;
pick_sb_modes(cpi, mi_row, mi_col + (ms >> 1), &rt, &dt, subsize,
get_block_context(x, subsize));
last_part_rate += rt;
last_part_dist += dt;
}
set_partition_seg_context(cm, xd, mi_row, mi_col);
pl = partition_plane_context(xd, bsize);
last_part_rate += x->partition_cost[pl][PARTITION_VERT];
break;
case PARTITION_SPLIT:
// Split partition.
last_part_rate = 0;
last_part_dist = 0;
for (i = 0; i < 4; i++) {
int x_idx = (i & 1) * (ms >> 1);
int y_idx = (i >> 1) * (ms >> 1);
int jj = i >> 1, ii = i & 0x01;
int rt;
int64_t dt;
if ((mi_row + y_idx >= cm->mi_rows) || (mi_col + x_idx >= cm->mi_cols))
continue;
*(get_sb_index(xd, subsize)) = i;
rd_use_partition(cpi, m + jj * bss * mis + ii * bss, tp, mi_row + y_idx,
mi_col + x_idx, subsize, &rt, &dt, i != 3);
last_part_rate += rt;
last_part_dist += dt;
}
set_partition_seg_context(cm, xd, mi_row, mi_col);
pl = partition_plane_context(xd, bsize);
last_part_rate += x->partition_cost[pl][PARTITION_SPLIT];
break;
default:
assert(0);
}
if (cpi->sf.adjust_partitioning_from_last_frame
&& partition != PARTITION_SPLIT && bsize > BLOCK_SIZE_SB8X8
&& (mi_row + ms < cm->mi_rows || mi_row + (ms >> 1) == cm->mi_rows)
&& (mi_col + ms < cm->mi_cols || mi_col + (ms >> 1) == cm->mi_cols)) {
BLOCK_SIZE_TYPE split_subsize = get_subsize(bsize, PARTITION_SPLIT);
split_rate = 0;
split_dist = 0;
restore_context(cpi, mi_row, mi_col, a, l, sa, sl, bsize);
// Split partition.
for (i = 0; i < 4; i++) {
int x_idx = (i & 1) * (bs >> 2);
int y_idx = (i >> 1) * (bs >> 2);
int rt = 0;
int64_t dt = 0;
ENTROPY_CONTEXT l[16 * MAX_MB_PLANE], a[16 * MAX_MB_PLANE];
PARTITION_CONTEXT sl[8], sa[8];
if ((mi_row + y_idx >= cm->mi_rows)
|| (mi_col + x_idx >= cm->mi_cols))
continue;
*(get_sb_index(xd, split_subsize)) = i;
*(get_sb_partitioning(x, bsize)) = split_subsize;
*(get_sb_partitioning(x, split_subsize)) = split_subsize;
save_context(cpi, mi_row, mi_col, a, l, sa, sl, bsize);
pick_sb_modes(cpi, mi_row + y_idx, mi_col + x_idx, &rt, &dt,
split_subsize, get_block_context(x, split_subsize));
restore_context(cpi, mi_row, mi_col, a, l, sa, sl, bsize);
if (rt < INT_MAX && dt < INT_MAX && i != 3)
encode_sb(cpi, tp, mi_row + y_idx, mi_col + x_idx, 0,
split_subsize);
split_rate += rt;
split_dist += dt;
set_partition_seg_context(cm, xd, mi_row + y_idx, mi_col + x_idx);
pl = partition_plane_context(xd, bsize);
split_rate += x->partition_cost[pl][PARTITION_NONE];
}
set_partition_seg_context(cm, xd, mi_row, mi_col);
pl = partition_plane_context(xd, bsize);
split_rate += x->partition_cost[pl][PARTITION_SPLIT];
chosen_rate = split_rate;
chosen_dist = split_dist;
}
// If last_part is better set the partitioning to that...
if (RDCOST(x->rdmult, x->rddiv, last_part_rate, last_part_dist)
< RDCOST(x->rdmult, x->rddiv, chosen_rate, chosen_dist)) {
m->mbmi.sb_type = bsize;
if (bsize >= BLOCK_SIZE_SB8X8)
*(get_sb_partitioning(x, bsize)) = subsize;
chosen_rate = last_part_rate;
chosen_dist = last_part_dist;
}
// If none was better set the partitioning to that...
if (RDCOST(x->rdmult, x->rddiv, chosen_rate, chosen_dist)
> RDCOST(x->rdmult, x->rddiv, none_rate, none_dist)) {
if (bsize >= BLOCK_SIZE_SB8X8)
*(get_sb_partitioning(x, bsize)) = bsize;
chosen_rate = none_rate;
chosen_dist = none_dist;
}
restore_context(cpi, mi_row, mi_col, a, l, sa, sl, bsize);
// We must have chosen a partitioning and encoding or we'll fail later on.
// No other opportunities for success.
assert(chosen_rate < INT_MAX && chosen_dist < INT_MAX);
if (do_recon)
encode_sb(cpi, tp, mi_row, mi_col, bsize == BLOCK_SIZE_SB64X64, bsize);
*rate = chosen_rate;
*dist = chosen_dist;
}
// TODO(jingning,jimbankoski,rbultje): properly skip partition types that are
// unlikely to be selected depending on previously rate-distortion optimization
// results, for encoding speed-up.
static void rd_pick_partition(VP9_COMP *cpi, TOKENEXTRA **tp, int mi_row,
int mi_col, BLOCK_SIZE_TYPE bsize, int *rate,
int64_t *dist, int do_recon) {
VP9_COMMON * const cm = &cpi->common;
MACROBLOCK * const x = &cpi->mb;
MACROBLOCKD * const xd = &x->e_mbd;
int bsl = b_width_log2(bsize), bs = 1 << bsl;
int ms = bs / 2;
ENTROPY_CONTEXT l[16 * MAX_MB_PLANE], a[16 * MAX_MB_PLANE];
PARTITION_CONTEXT sl[8], sa[8];
TOKENEXTRA *tp_orig = *tp;
int i, pl;
BLOCK_SIZE_TYPE subsize;
int srate = INT_MAX;
int64_t sdist = INT_MAX;
(void) *tp_orig;
if (bsize < BLOCK_SIZE_SB8X8)
if (xd->ab_index != 0) {
*rate = 0;
*dist = 0;
return;
}
assert(mi_height_log2(bsize) == mi_width_log2(bsize));
save_context(cpi, mi_row, mi_col, a, l, sa, sl, bsize);
// PARTITION_SPLIT
if (!cpi->sf.use_partitions_greater_than
|| (cpi->sf.use_partitions_greater_than
&& bsize > cpi->sf.greater_than_block_size)) {
if (bsize >= BLOCK_SIZE_SB8X8) {
int r4 = 0;
int64_t d4 = 0;
subsize = get_subsize(bsize, PARTITION_SPLIT);
*(get_sb_partitioning(x, bsize)) = subsize;
for (i = 0; i < 4; ++i) {
int x_idx = (i & 1) * (ms >> 1);
int y_idx = (i >> 1) * (ms >> 1);
int r = 0;
int64_t d = 0;
if ((mi_row + y_idx >= cm->mi_rows) || (mi_col + x_idx >= cm->mi_cols))
continue;
*(get_sb_index(xd, subsize)) = i;
rd_pick_partition(cpi, tp, mi_row + y_idx, mi_col + x_idx, subsize, &r,
&d, i != 3);
r4 += r;
d4 += d;
}
set_partition_seg_context(cm, xd, mi_row, mi_col);
pl = partition_plane_context(xd, bsize);
if (r4 < INT_MAX)
r4 += x->partition_cost[pl][PARTITION_SPLIT];
assert(r4 >= 0);
assert(d4 >= 0);
srate = r4;
sdist = d4;
restore_context(cpi, mi_row, mi_col, a, l, sa, sl, bsize);
}
}
if (!cpi->sf.use_partitions_less_than
|| (cpi->sf.use_partitions_less_than
&& bsize <= cpi->sf.less_than_block_size)) {
int larger_is_better = 0;
// PARTITION_NONE
if ((mi_row + (ms >> 1) < cm->mi_rows) &&
(mi_col + (ms >> 1) < cm->mi_cols)) {
int r;
int64_t d;
pick_sb_modes(cpi, mi_row, mi_col, &r, &d, bsize,
get_block_context(x, bsize));
if (bsize >= BLOCK_SIZE_SB8X8) {
set_partition_seg_context(cm, xd, mi_row, mi_col);
pl = partition_plane_context(xd, bsize);
r += x->partition_cost[pl][PARTITION_NONE];
}
if (RDCOST(x->rdmult, x->rddiv, r, d)
< RDCOST(x->rdmult, x->rddiv, srate, sdist)) {
srate = r;
sdist = d;
larger_is_better = 1;
if (bsize >= BLOCK_SIZE_SB8X8)
*(get_sb_partitioning(x, bsize)) = bsize;
}
}
if (!cpi->sf.use_square_partition_only &&
(!cpi->sf.less_rectangular_check ||!larger_is_better)) {
// PARTITION_HORZ
if (bsize >= BLOCK_SIZE_SB8X8 && mi_col + (ms >> 1) < cm->mi_cols) {
int r2, r = 0;
int64_t d2, d = 0;
subsize = get_subsize(bsize, PARTITION_HORZ);
*(get_sb_index(xd, subsize)) = 0;
pick_sb_modes(cpi, mi_row, mi_col, &r2, &d2, subsize,
get_block_context(x, subsize));
if (mi_row + (ms >> 1) < cm->mi_rows) {
update_state(cpi, get_block_context(x, subsize), subsize, 0);
encode_superblock(cpi, tp, 0, mi_row, mi_col, subsize);
*(get_sb_index(xd, subsize)) = 1;
pick_sb_modes(cpi, mi_row + (ms >> 1), mi_col, &r, &d, subsize,
get_block_context(x, subsize));
r2 += r;
d2 += d;
}
set_partition_seg_context(cm, xd, mi_row, mi_col);
pl = partition_plane_context(xd, bsize);
if (r2 < INT_MAX)
r2 += x->partition_cost[pl][PARTITION_HORZ];
if (RDCOST(x->rdmult, x->rddiv, r2, d2)
< RDCOST(x->rdmult, x->rddiv, srate, sdist)) {
srate = r2;
sdist = d2;
*(get_sb_partitioning(x, bsize)) = subsize;
}
restore_context(cpi, mi_row, mi_col, a, l, sa, sl, bsize);
}
// PARTITION_VERT
if (bsize >= BLOCK_SIZE_SB8X8 && mi_row + (ms >> 1) < cm->mi_rows) {
int r2;
int64_t d2;
subsize = get_subsize(bsize, PARTITION_VERT);
*(get_sb_index(xd, subsize)) = 0;
pick_sb_modes(cpi, mi_row, mi_col, &r2, &d2, subsize,
get_block_context(x, subsize));
if (mi_col + (ms >> 1) < cm->mi_cols) {
int r = 0;
int64_t d = 0;
update_state(cpi, get_block_context(x, subsize), subsize, 0);
encode_superblock(cpi, tp, 0, mi_row, mi_col, subsize);
*(get_sb_index(xd, subsize)) = 1;
pick_sb_modes(cpi, mi_row, mi_col + (ms >> 1), &r, &d, subsize,
get_block_context(x, subsize));
r2 += r;
d2 += d;
}
set_partition_seg_context(cm, xd, mi_row, mi_col);
pl = partition_plane_context(xd, bsize);
if (r2 < INT_MAX)
r2 += x->partition_cost[pl][PARTITION_VERT];
if (RDCOST(x->rdmult, x->rddiv, r2, d2)
< RDCOST(x->rdmult, x->rddiv, srate, sdist)) {
srate = r2;
sdist = d2;
*(get_sb_partitioning(x, bsize)) = subsize;
}
restore_context(cpi, mi_row, mi_col, a, l, sa, sl, bsize);
}
}
}
*rate = srate;
*dist = sdist;
restore_context(cpi, mi_row, mi_col, a, l, sa, sl, bsize);
if (srate < INT_MAX && sdist < INT_MAX && do_recon)
encode_sb(cpi, tp, mi_row, mi_col, bsize == BLOCK_SIZE_SB64X64, bsize);
if (bsize == BLOCK_SIZE_SB64X64) {
assert(tp_orig < *tp);
assert(srate < INT_MAX);
assert(sdist < INT_MAX);
} else {
assert(tp_orig == *tp);
}
}
// Examines 64x64 block and chooses a best reference frame
static void rd_pick_reference_frame(VP9_COMP *cpi, TOKENEXTRA **tp, int mi_row,
int mi_col, int *rate, int64_t *dist) {
VP9_COMMON * const cm = &cpi->common;
MACROBLOCK * const x = &cpi->mb;
MACROBLOCKD * const xd = &x->e_mbd;
int bsl = b_width_log2(BLOCK_SIZE_SB64X64), bs = 1 << bsl;
int ms = bs / 2;
ENTROPY_CONTEXT l[16 * MAX_MB_PLANE], a[16 * MAX_MB_PLANE];
PARTITION_CONTEXT sl[8], sa[8];
int pl;
int r;
int64_t d;
save_context(cpi, mi_row, mi_col, a, l, sa, sl, BLOCK_SIZE_SB64X64);
// Default is non mask (all reference frames allowed.
cpi->ref_frame_mask = 0;
// Do RD search for 64x64.
if ((mi_row + (ms >> 1) < cm->mi_rows) &&
(mi_col + (ms >> 1) < cm->mi_cols)) {
cpi->set_ref_frame_mask = 1;
pick_sb_modes(cpi, mi_row, mi_col, &r, &d, BLOCK_SIZE_SB64X64,
get_block_context(x, BLOCK_SIZE_SB64X64));
set_partition_seg_context(cm, xd, mi_row, mi_col);
pl = partition_plane_context(xd, BLOCK_SIZE_SB64X64);
r += x->partition_cost[pl][PARTITION_NONE];
*(get_sb_partitioning(x, BLOCK_SIZE_SB64X64)) = BLOCK_SIZE_SB64X64;
cpi->set_ref_frame_mask = 0;
}
*rate = r;
*dist = d;
// RDCOST(x->rdmult, x->rddiv, r, d)
restore_context(cpi, mi_row, mi_col, a, l, sa, sl, BLOCK_SIZE_SB64X64);
/*if (srate < INT_MAX && sdist < INT_MAX)
encode_sb(cpi, tp, mi_row, mi_col, 1, BLOCK_SIZE_SB64X64);
if (bsize == BLOCK_SIZE_SB64X64) {
assert(tp_orig < *tp);
assert(srate < INT_MAX);
assert(sdist < INT_MAX);
} else {
assert(tp_orig == *tp);
}
*/
}
static void encode_sb_row(VP9_COMP *cpi, int mi_row, TOKENEXTRA **tp,
int *totalrate) {
VP9_COMMON * const cm = &cpi->common;
int mi_col;
// Initialize the left context for the new SB row
vpx_memset(&cm->left_context, 0, sizeof(cm->left_context));
vpx_memset(cm->left_seg_context, 0, sizeof(cm->left_seg_context));
// Code each SB in the row
for (mi_col = cm->cur_tile_mi_col_start; mi_col < cm->cur_tile_mi_col_end;
mi_col += MI_BLOCK_SIZE) {
int dummy_rate;
int64_t dummy_dist;
// Initialize a mask of modes that we will not consider;
// cpi->unused_mode_skip_mask = 0x0000000AAE17F800 (test no golden)
if (cpi->common.frame_type == KEY_FRAME)
cpi->unused_mode_skip_mask = 0;
else
cpi->unused_mode_skip_mask = 0xFFFFFFFFFFFFFE00;
if (cpi->sf.reference_masking) {
rd_pick_reference_frame(cpi, tp, mi_row, mi_col,
&dummy_rate, &dummy_dist);
}
if (cpi->sf.partition_by_variance || cpi->sf.use_lastframe_partitioning ||
cpi->sf.use_one_partition_size_always ) {
const int idx_str = cm->mode_info_stride * mi_row + mi_col;
MODE_INFO *m = cm->mi + idx_str;
MODE_INFO *p = cm->prev_mi + idx_str;
if (cpi->sf.use_one_partition_size_always) {
set_offsets(cpi, mi_row, mi_col, BLOCK_SIZE_SB64X64);
set_partitioning(cpi, m, cpi->sf.always_this_block_size);
rd_use_partition(cpi, m, tp, mi_row, mi_col, BLOCK_SIZE_SB64X64,
&dummy_rate, &dummy_dist, 1);
} else if (cpi->sf.partition_by_variance) {
choose_partitioning(cpi, cm->mi, mi_row, mi_col);
rd_use_partition(cpi, m, tp, mi_row, mi_col, BLOCK_SIZE_SB64X64,
&dummy_rate, &dummy_dist, 1);
} else {
if ((cpi->common.current_video_frame
% cpi->sf.last_partitioning_redo_frequency) == 0
|| cm->prev_mi == 0
|| cpi->common.show_frame == 0
|| cpi->common.frame_type == KEY_FRAME
|| cpi->is_src_frame_alt_ref) {
rd_pick_partition(cpi, tp, mi_row, mi_col, BLOCK_SIZE_SB64X64,
&dummy_rate, &dummy_dist, 1);
} else {
copy_partitioning(cpi, m, p);
rd_use_partition(cpi, m, tp, mi_row, mi_col, BLOCK_SIZE_SB64X64,
&dummy_rate, &dummy_dist, 1);
}
}
} else {
rd_pick_partition(cpi, tp, mi_row, mi_col, BLOCK_SIZE_SB64X64,
&dummy_rate, &dummy_dist, 1);
}
}
}
static void init_encode_frame_mb_context(VP9_COMP *cpi) {
MACROBLOCK *const x = &cpi->mb;
VP9_COMMON *const cm = &cpi->common;
MACROBLOCKD *const xd = &x->e_mbd;
const int aligned_mi_cols = mi_cols_aligned_to_sb(cm->mi_cols);
x->act_zbin_adj = 0;
cpi->seg0_idx = 0;
xd->mode_info_stride = cm->mode_info_stride;
xd->frame_type = cm->frame_type;
xd->frames_since_golden = cm->frames_since_golden;
xd->frames_till_alt_ref_frame = cm->frames_till_alt_ref_frame;
// reset intra mode contexts
if (cm->frame_type == KEY_FRAME)
vp9_init_mbmode_probs(cm);
// Copy data over into macro block data structures.
vp9_setup_src_planes(x, cpi->Source, 0, 0);
// TODO(jkoleszar): are these initializations required?
setup_pre_planes(xd, 0, &cm->yv12_fb[cm->ref_frame_map[cpi->lst_fb_idx]],
0, 0, NULL, NULL);
setup_dst_planes(xd, &cm->yv12_fb[cm->new_fb_idx], 0, 0);
setup_block_dptrs(&x->e_mbd, cm->subsampling_x, cm->subsampling_y);
xd->mode_info_context->mbmi.mode = DC_PRED;
xd->mode_info_context->mbmi.uv_mode = DC_PRED;
vp9_zero(cpi->y_mode_count)
vp9_zero(cpi->y_uv_mode_count)
vp9_zero(cm->fc.inter_mode_counts)
vp9_zero(cpi->partition_count);
vp9_zero(cpi->intra_inter_count);
vp9_zero(cpi->comp_inter_count);
vp9_zero(cpi->single_ref_count);
vp9_zero(cpi->comp_ref_count);
vp9_zero(cm->fc.tx_count_32x32p);
vp9_zero(cm->fc.tx_count_16x16p);
vp9_zero(cm->fc.tx_count_8x8p);
vp9_zero(cm->fc.mbskip_count);
// Note: this memset assumes above_context[0], [1] and [2]
// are allocated as part of the same buffer.
vpx_memset(cm->above_context[0], 0,
sizeof(ENTROPY_CONTEXT) * 2 * MAX_MB_PLANE * aligned_mi_cols);
vpx_memset(cm->above_seg_context, 0,
sizeof(PARTITION_CONTEXT) * aligned_mi_cols);
}
static void switch_lossless_mode(VP9_COMP *cpi, int lossless) {
if (lossless) {
Tx size selection enhancements (1) Refines the modeling function and uses that to add some speed features. Specifically, intead of using a flag use_largest_txfm as a speed feature, an enum tx_size_search_method is used, of which two of the types are USE_FULL_RD and USE_LARGESTALL. Two other new types are added: USE_LARGESTINTRA (use largest only for intra) USE_LARGESTINTRA_MODELINTER (use largest for intra, and model for inter) (2) Another change is that the framework for deciding transform type is simplified to use a heuristic count based method rather than an rd based method using txfm_cache. In practice the new method is found to work just as well - with derf only -0.01 down. The new method is more compatible with the new framework where certain rd costs are based on full rd and certain others are based on modeled rd or are not computed. In this patch the existing rd based method is still kept for use in the USE_FULL_RD mode. In the other modes, the count based method is used. However the recommendation is to remove it eventually since the benefit is limited, and will remove a lot of complications in the code (3) Finally a bug is fixed with the existing use_largest_txfm speed feature that causes mismatches when the lossless mode and 4x4 WH transform is forced. Results on derf: USE_FULL_RD: +0.03% (due to change in the tables), 0% encode time reduction USE_LARGESTINTRA: -0.21%, 15% encode time reduction (this one is a pretty good compromise) USE_LARGESTINTRA_MODELINTER: -0.98%, 22% encode time reduction (currently the benefit of modeling is limited for txfm size selection, but keeping this enum as a placeholder) . USE_LARGESTALL: -1.05%, 27% encode-time reduction (same as existing use_largest_txfm speed feature). Change-Id: I4d60a5f9ce78fbc90cddf2f97ed91d8bc0d4f936
2013-06-22 01:31:12 +02:00
// printf("Switching to lossless\n");
cpi->mb.fwd_txm8x4 = vp9_short_walsh8x4;
cpi->mb.fwd_txm4x4 = vp9_short_walsh4x4;
cpi->mb.e_mbd.inv_txm4x4_1_add = vp9_short_iwalsh4x4_1_add;
cpi->mb.e_mbd.inv_txm4x4_add = vp9_short_iwalsh4x4_add;
cpi->mb.optimize = 0;
cpi->common.filter_level = 0;
cpi->zbin_mode_boost_enabled = 0;
cpi->common.txfm_mode = ONLY_4X4;
} else {
Tx size selection enhancements (1) Refines the modeling function and uses that to add some speed features. Specifically, intead of using a flag use_largest_txfm as a speed feature, an enum tx_size_search_method is used, of which two of the types are USE_FULL_RD and USE_LARGESTALL. Two other new types are added: USE_LARGESTINTRA (use largest only for intra) USE_LARGESTINTRA_MODELINTER (use largest for intra, and model for inter) (2) Another change is that the framework for deciding transform type is simplified to use a heuristic count based method rather than an rd based method using txfm_cache. In practice the new method is found to work just as well - with derf only -0.01 down. The new method is more compatible with the new framework where certain rd costs are based on full rd and certain others are based on modeled rd or are not computed. In this patch the existing rd based method is still kept for use in the USE_FULL_RD mode. In the other modes, the count based method is used. However the recommendation is to remove it eventually since the benefit is limited, and will remove a lot of complications in the code (3) Finally a bug is fixed with the existing use_largest_txfm speed feature that causes mismatches when the lossless mode and 4x4 WH transform is forced. Results on derf: USE_FULL_RD: +0.03% (due to change in the tables), 0% encode time reduction USE_LARGESTINTRA: -0.21%, 15% encode time reduction (this one is a pretty good compromise) USE_LARGESTINTRA_MODELINTER: -0.98%, 22% encode time reduction (currently the benefit of modeling is limited for txfm size selection, but keeping this enum as a placeholder) . USE_LARGESTALL: -1.05%, 27% encode-time reduction (same as existing use_largest_txfm speed feature). Change-Id: I4d60a5f9ce78fbc90cddf2f97ed91d8bc0d4f936
2013-06-22 01:31:12 +02:00
// printf("Not lossless\n");
cpi->mb.fwd_txm8x4 = vp9_short_fdct8x4;
cpi->mb.fwd_txm4x4 = vp9_short_fdct4x4;
cpi->mb.e_mbd.inv_txm4x4_1_add = vp9_short_idct4x4_1_add;
cpi->mb.e_mbd.inv_txm4x4_add = vp9_short_idct4x4_add;
}
}
static void switch_txfm_mode(VP9_COMP *cpi) {
Tx size selection enhancements (1) Refines the modeling function and uses that to add some speed features. Specifically, intead of using a flag use_largest_txfm as a speed feature, an enum tx_size_search_method is used, of which two of the types are USE_FULL_RD and USE_LARGESTALL. Two other new types are added: USE_LARGESTINTRA (use largest only for intra) USE_LARGESTINTRA_MODELINTER (use largest for intra, and model for inter) (2) Another change is that the framework for deciding transform type is simplified to use a heuristic count based method rather than an rd based method using txfm_cache. In practice the new method is found to work just as well - with derf only -0.01 down. The new method is more compatible with the new framework where certain rd costs are based on full rd and certain others are based on modeled rd or are not computed. In this patch the existing rd based method is still kept for use in the USE_FULL_RD mode. In the other modes, the count based method is used. However the recommendation is to remove it eventually since the benefit is limited, and will remove a lot of complications in the code (3) Finally a bug is fixed with the existing use_largest_txfm speed feature that causes mismatches when the lossless mode and 4x4 WH transform is forced. Results on derf: USE_FULL_RD: +0.03% (due to change in the tables), 0% encode time reduction USE_LARGESTINTRA: -0.21%, 15% encode time reduction (this one is a pretty good compromise) USE_LARGESTINTRA_MODELINTER: -0.98%, 22% encode time reduction (currently the benefit of modeling is limited for txfm size selection, but keeping this enum as a placeholder) . USE_LARGESTALL: -1.05%, 27% encode-time reduction (same as existing use_largest_txfm speed feature). Change-Id: I4d60a5f9ce78fbc90cddf2f97ed91d8bc0d4f936
2013-06-22 01:31:12 +02:00
if (cpi->sf.tx_size_search_method == USE_LARGESTALL &&
cpi->common.txfm_mode >= ALLOW_32X32)
cpi->common.txfm_mode = ALLOW_32X32;
}
static void encode_frame_internal(VP9_COMP *cpi) {
int mi_row;
MACROBLOCK * const x = &cpi->mb;
VP9_COMMON * const cm = &cpi->common;
MACROBLOCKD * const xd = &x->e_mbd;
int totalrate;
2010-05-18 17:58:33 +02:00
// fprintf(stderr, "encode_frame_internal frame %d (%d) type %d\n",
// cpi->common.current_video_frame, cpi->common.show_frame,
// cm->frame_type);
// debug output
#if DBG_PRNT_SEGMAP
{
FILE *statsfile;
statsfile = fopen("segmap2.stt", "a");
fprintf(statsfile, "\n");
fclose(statsfile);
}
#endif
totalrate = 0;
// Reset frame count of inter 0,0 motion vector usage.
cpi->inter_zz_count = 0;
2010-05-18 17:58:33 +02:00
vp9_zero(cm->fc.switchable_interp_count);
Tx size selection enhancements (1) Refines the modeling function and uses that to add some speed features. Specifically, intead of using a flag use_largest_txfm as a speed feature, an enum tx_size_search_method is used, of which two of the types are USE_FULL_RD and USE_LARGESTALL. Two other new types are added: USE_LARGESTINTRA (use largest only for intra) USE_LARGESTINTRA_MODELINTER (use largest for intra, and model for inter) (2) Another change is that the framework for deciding transform type is simplified to use a heuristic count based method rather than an rd based method using txfm_cache. In practice the new method is found to work just as well - with derf only -0.01 down. The new method is more compatible with the new framework where certain rd costs are based on full rd and certain others are based on modeled rd or are not computed. In this patch the existing rd based method is still kept for use in the USE_FULL_RD mode. In the other modes, the count based method is used. However the recommendation is to remove it eventually since the benefit is limited, and will remove a lot of complications in the code (3) Finally a bug is fixed with the existing use_largest_txfm speed feature that causes mismatches when the lossless mode and 4x4 WH transform is forced. Results on derf: USE_FULL_RD: +0.03% (due to change in the tables), 0% encode time reduction USE_LARGESTINTRA: -0.21%, 15% encode time reduction (this one is a pretty good compromise) USE_LARGESTINTRA_MODELINTER: -0.98%, 22% encode time reduction (currently the benefit of modeling is limited for txfm size selection, but keeping this enum as a placeholder) . USE_LARGESTALL: -1.05%, 27% encode-time reduction (same as existing use_largest_txfm speed feature). Change-Id: I4d60a5f9ce78fbc90cddf2f97ed91d8bc0d4f936
2013-06-22 01:31:12 +02:00
vp9_zero(cpi->txfm_stepdown_count);
2010-05-18 17:58:33 +02:00
xd->mode_info_context = cm->mi;
xd->prev_mode_info_context = cm->prev_mi;
vp9_zero(cpi->NMVcount);
vp9_zero(cpi->coef_counts);
vp9_zero(cm->fc.eob_branch_counts);
2010-05-18 17:58:33 +02:00
cpi->mb.e_mbd.lossless = cm->base_qindex == 0 && cm->y_dc_delta_q == 0
&& cm->uv_dc_delta_q == 0 && cm->uv_ac_delta_q == 0;
switch_lossless_mode(cpi, cpi->mb.e_mbd.lossless);
vp9_frame_init_quantizer(cpi);
2010-05-18 17:58:33 +02:00
vp9_initialize_rd_consts(cpi, cm->base_qindex + cm->y_dc_delta_q);
vp9_initialize_me_consts(cpi, cm->base_qindex);
switch_txfm_mode(cpi);
2010-05-18 17:58:33 +02:00
if (cpi->oxcf.tuning == VP8_TUNE_SSIM) {
// Initialize encode frame context.
init_encode_frame_mb_context(cpi);
// Build a frame level activity map
build_activity_map(cpi);
}
// re-initencode frame context.
init_encode_frame_mb_context(cpi);
2010-05-18 17:58:33 +02:00
vpx_memset(cpi->rd_comp_pred_diff, 0, sizeof(cpi->rd_comp_pred_diff));
vp9_zero(cpi->rd_filter_diff);
vpx_memset(cpi->rd_tx_select_diff, 0, sizeof(cpi->rd_tx_select_diff));
vpx_memset(cpi->rd_tx_select_threshes, 0, sizeof(cpi->rd_tx_select_threshes));
set_prev_mi(cm);
{
struct vpx_usec_timer emr_timer;
vpx_usec_timer_start(&emr_timer);
{
[WIP] Add column-based tiling. This patch adds column-based tiling. The idea is to make each tile independently decodable (after reading the common frame header) and also independendly encodable (minus within-frame cost adjustments in the RD loop) to speed-up hardware & software en/decoders if they used multi-threading. Column-based tiling has the added advantage (over other tiling methods) that it minimizes realtime use-case latency, since all threads can start encoding data as soon as the first SB-row worth of data is available to the encoder. There is some test code that does random tile ordering in the decoder, to confirm that each tile is indeed independently decodable from other tiles in the same frame. At tile edges, all contexts assume default values (i.e. 0, 0 motion vector, no coefficients, DC intra4x4 mode), and motion vector search and ordering do not cross tiles in the same frame. t log Tile independence is not maintained between frames ATM, i.e. tile 0 of frame 1 is free to use motion vectors that point into any tile of frame 0. We support 1 (i.e. no tiling), 2 or 4 column-tiles. The loopfilter crosses tile boundaries. I discussed this briefly with Aki and he says that's OK. An in-loop loopfilter would need to do some sync between tile threads, but that shouldn't be a big issue. Resuls: with tiling disabled, we go up slightly because of improved edge use in the intra4x4 prediction. With 2 tiles, we lose about ~1% on derf, ~0.35% on HD and ~0.55% on STD/HD. With 4 tiles, we lose another ~1.5% on derf ~0.77% on HD and ~0.85% on STD/HD. Most of this loss is concentrated in the low-bitrate end of clips, and most of it is because of the loss of edges at tile boundaries and the resulting loss of intra predictors. TODO: - more tiles (perhaps allow row-based tiling also, and max. 8 tiles)? - maybe optionally (for EC purposes), motion vectors themselves should not cross tile edges, or we should emulate such borders as if they were off-frame, to limit error propagation to within one tile only. This doesn't have to be the default behaviour but could be an optional bitstream flag. Change-Id: I5951c3a0742a767b20bc9fb5af685d9892c2c96f
2013-02-01 18:35:28 +01:00
// Take tiles into account and give start/end MB
int tile_col, tile_row;
TOKENEXTRA *tp = cpi->tok;
for (tile_row = 0; tile_row < cm->tile_rows; tile_row++) {
vp9_get_tile_row_offsets(cm, tile_row);
for (tile_col = 0; tile_col < cm->tile_columns; tile_col++) {
TOKENEXTRA *tp_old = tp;
// For each row of SBs in the frame
vp9_get_tile_col_offsets(cm, tile_col);
for (mi_row = cm->cur_tile_mi_row_start;
mi_row < cm->cur_tile_mi_row_end; mi_row += 8)
encode_sb_row(cpi, mi_row, &tp, &totalrate);
cpi->tok_count[tile_row][tile_col] = (unsigned int)(tp - tp_old);
assert(tp - cpi->tok <=
get_token_alloc(cm->mb_rows, cm->mb_cols));
[WIP] Add column-based tiling. This patch adds column-based tiling. The idea is to make each tile independently decodable (after reading the common frame header) and also independendly encodable (minus within-frame cost adjustments in the RD loop) to speed-up hardware & software en/decoders if they used multi-threading. Column-based tiling has the added advantage (over other tiling methods) that it minimizes realtime use-case latency, since all threads can start encoding data as soon as the first SB-row worth of data is available to the encoder. There is some test code that does random tile ordering in the decoder, to confirm that each tile is indeed independently decodable from other tiles in the same frame. At tile edges, all contexts assume default values (i.e. 0, 0 motion vector, no coefficients, DC intra4x4 mode), and motion vector search and ordering do not cross tiles in the same frame. t log Tile independence is not maintained between frames ATM, i.e. tile 0 of frame 1 is free to use motion vectors that point into any tile of frame 0. We support 1 (i.e. no tiling), 2 or 4 column-tiles. The loopfilter crosses tile boundaries. I discussed this briefly with Aki and he says that's OK. An in-loop loopfilter would need to do some sync between tile threads, but that shouldn't be a big issue. Resuls: with tiling disabled, we go up slightly because of improved edge use in the intra4x4 prediction. With 2 tiles, we lose about ~1% on derf, ~0.35% on HD and ~0.55% on STD/HD. With 4 tiles, we lose another ~1.5% on derf ~0.77% on HD and ~0.85% on STD/HD. Most of this loss is concentrated in the low-bitrate end of clips, and most of it is because of the loss of edges at tile boundaries and the resulting loss of intra predictors. TODO: - more tiles (perhaps allow row-based tiling also, and max. 8 tiles)? - maybe optionally (for EC purposes), motion vectors themselves should not cross tile edges, or we should emulate such borders as if they were off-frame, to limit error propagation to within one tile only. This doesn't have to be the default behaviour but could be an optional bitstream flag. Change-Id: I5951c3a0742a767b20bc9fb5af685d9892c2c96f
2013-02-01 18:35:28 +01:00
}
}
2010-05-18 17:58:33 +02:00
}
vpx_usec_timer_mark(&emr_timer);
cpi->time_encode_mb_row += vpx_usec_timer_elapsed(&emr_timer);
}
// 256 rate units to the bit,
// projected_frame_size in units of BYTES
cpi->projected_frame_size = totalrate >> 8;
2010-05-18 17:58:33 +02:00
#if 0
// Keep record of the total distortion this time around for future use
cpi->last_frame_distortion = cpi->frame_distortion;
2010-05-18 17:58:33 +02:00
#endif
}
static int check_dual_ref_flags(VP9_COMP *cpi) {
MACROBLOCKD *xd = &cpi->mb.e_mbd;
int ref_flags = cpi->ref_frame_flags;
if (vp9_segfeature_active(&xd->seg, 1, SEG_LVL_REF_FRAME)) {
return 0;
} else {
return (!!(ref_flags & VP9_GOLD_FLAG) + !!(ref_flags & VP9_LAST_FLAG)
+ !!(ref_flags & VP9_ALT_FLAG)) >= 2;
}
}
static int get_skip_flag(MODE_INFO *mi, int mis, int ymbs, int xmbs) {
int x, y;
for (y = 0; y < ymbs; y++) {
for (x = 0; x < xmbs; x++) {
if (!mi[y * mis + x].mbmi.mb_skip_coeff)
return 0;
}
}
return 1;
}
static void set_txfm_flag(MODE_INFO *mi, int mis, int ymbs, int xmbs,
TX_SIZE txfm_size) {
int x, y;
for (y = 0; y < ymbs; y++) {
for (x = 0; x < xmbs; x++)
mi[y * mis + x].mbmi.txfm_size = txfm_size;
}
}
static void reset_skip_txfm_size_b(VP9_COMP *cpi, MODE_INFO *mi, int mis,
TX_SIZE txfm_max, int bw, int bh, int mi_row,
int mi_col, BLOCK_SIZE_TYPE bsize) {
VP9_COMMON * const cm = &cpi->common;
MB_MODE_INFO * const mbmi = &mi->mbmi;
if (mi_row >= cm->mi_rows || mi_col >= cm->mi_cols)
return;
if (mbmi->txfm_size > txfm_max) {
MACROBLOCK * const x = &cpi->mb;
MACROBLOCKD * const xd = &x->e_mbd;
const int ymbs = MIN(bh, cm->mi_rows - mi_row);
const int xmbs = MIN(bw, cm->mi_cols - mi_col);
xd->mode_info_context = mi;
assert(vp9_segfeature_active(&xd->seg, mbmi->segment_id, SEG_LVL_SKIP) ||
get_skip_flag(mi, mis, ymbs, xmbs));
set_txfm_flag(mi, mis, ymbs, xmbs, txfm_max);
}
}
static void reset_skip_txfm_size_sb(VP9_COMP *cpi, MODE_INFO *mi,
TX_SIZE txfm_max, int mi_row, int mi_col,
BLOCK_SIZE_TYPE bsize) {
VP9_COMMON * const cm = &cpi->common;
const int mis = cm->mode_info_stride;
int bwl, bhl;
const int bsl = mi_width_log2(bsize), bs = 1 << (bsl - 1);
if (mi_row >= cm->mi_rows || mi_col >= cm->mi_cols)
return;
bwl = mi_width_log2(mi->mbmi.sb_type);
bhl = mi_height_log2(mi->mbmi.sb_type);
if (bwl == bsl && bhl == bsl) {
reset_skip_txfm_size_b(cpi, mi, mis, txfm_max, 1 << bsl, 1 << bsl, mi_row,
mi_col, bsize);
} else if (bwl == bsl && bhl < bsl) {
reset_skip_txfm_size_b(cpi, mi, mis, txfm_max, 1 << bsl, bs, mi_row, mi_col,
bsize);
reset_skip_txfm_size_b(cpi, mi + bs * mis, mis, txfm_max, 1 << bsl, bs,
mi_row + bs, mi_col, bsize);
} else if (bwl < bsl && bhl == bsl) {
reset_skip_txfm_size_b(cpi, mi, mis, txfm_max, bs, 1 << bsl, mi_row, mi_col,
bsize);
reset_skip_txfm_size_b(cpi, mi + bs, mis, txfm_max, bs, 1 << bsl, mi_row,
mi_col + bs, bsize);
} else {
BLOCK_SIZE_TYPE subsize;
int n;
assert(bwl < bsl && bhl < bsl);
if (bsize == BLOCK_SIZE_SB64X64) {
subsize = BLOCK_SIZE_SB32X32;
} else if (bsize == BLOCK_SIZE_SB32X32) {
subsize = BLOCK_SIZE_MB16X16;
} else {
assert(bsize == BLOCK_SIZE_MB16X16);
subsize = BLOCK_SIZE_SB8X8;
}
for (n = 0; n < 4; n++) {
const int y_idx = n >> 1, x_idx = n & 0x01;
reset_skip_txfm_size_sb(cpi, mi + y_idx * bs * mis + x_idx * bs, txfm_max,
mi_row + y_idx * bs, mi_col + x_idx * bs,
subsize);
}
}
}
static void reset_skip_txfm_size(VP9_COMP *cpi, TX_SIZE txfm_max) {
VP9_COMMON * const cm = &cpi->common;
int mi_row, mi_col;
const int mis = cm->mode_info_stride;
MODE_INFO *mi, *mi_ptr = cm->mi;
for (mi_row = 0; mi_row < cm->mi_rows; mi_row += 8, mi_ptr += 8 * mis) {
mi = mi_ptr;
for (mi_col = 0; mi_col < cm->mi_cols; mi_col += 8, mi += 8) {
reset_skip_txfm_size_sb(cpi, mi, txfm_max, mi_row, mi_col,
BLOCK_SIZE_SB64X64);
}
}
}
Tx size selection enhancements (1) Refines the modeling function and uses that to add some speed features. Specifically, intead of using a flag use_largest_txfm as a speed feature, an enum tx_size_search_method is used, of which two of the types are USE_FULL_RD and USE_LARGESTALL. Two other new types are added: USE_LARGESTINTRA (use largest only for intra) USE_LARGESTINTRA_MODELINTER (use largest for intra, and model for inter) (2) Another change is that the framework for deciding transform type is simplified to use a heuristic count based method rather than an rd based method using txfm_cache. In practice the new method is found to work just as well - with derf only -0.01 down. The new method is more compatible with the new framework where certain rd costs are based on full rd and certain others are based on modeled rd or are not computed. In this patch the existing rd based method is still kept for use in the USE_FULL_RD mode. In the other modes, the count based method is used. However the recommendation is to remove it eventually since the benefit is limited, and will remove a lot of complications in the code (3) Finally a bug is fixed with the existing use_largest_txfm speed feature that causes mismatches when the lossless mode and 4x4 WH transform is forced. Results on derf: USE_FULL_RD: +0.03% (due to change in the tables), 0% encode time reduction USE_LARGESTINTRA: -0.21%, 15% encode time reduction (this one is a pretty good compromise) USE_LARGESTINTRA_MODELINTER: -0.98%, 22% encode time reduction (currently the benefit of modeling is limited for txfm size selection, but keeping this enum as a placeholder) . USE_LARGESTALL: -1.05%, 27% encode-time reduction (same as existing use_largest_txfm speed feature). Change-Id: I4d60a5f9ce78fbc90cddf2f97ed91d8bc0d4f936
2013-06-22 01:31:12 +02:00
static int get_frame_type(VP9_COMP *cpi) {
int frame_type;
if (cpi->common.frame_type == KEY_FRAME)
frame_type = 0;
else if (cpi->is_src_frame_alt_ref && cpi->refresh_golden_frame)
frame_type = 3;
else if (cpi->refresh_golden_frame || cpi->refresh_alt_ref_frame)
frame_type = 1;
else
frame_type = 2;
return frame_type;
}
static void select_txfm_mode(VP9_COMP *cpi) {
if (cpi->oxcf.lossless) {
cpi->common.txfm_mode = ONLY_4X4;
} else if (cpi->common.current_video_frame == 0) {
cpi->common.txfm_mode = TX_MODE_SELECT;
} else {
if (cpi->sf.tx_size_search_method == USE_LARGESTALL) {
cpi->common.txfm_mode = ALLOW_32X32;
} else if (cpi->sf.tx_size_search_method == USE_FULL_RD) {
Tx size selection enhancements (1) Refines the modeling function and uses that to add some speed features. Specifically, intead of using a flag use_largest_txfm as a speed feature, an enum tx_size_search_method is used, of which two of the types are USE_FULL_RD and USE_LARGESTALL. Two other new types are added: USE_LARGESTINTRA (use largest only for intra) USE_LARGESTINTRA_MODELINTER (use largest for intra, and model for inter) (2) Another change is that the framework for deciding transform type is simplified to use a heuristic count based method rather than an rd based method using txfm_cache. In practice the new method is found to work just as well - with derf only -0.01 down. The new method is more compatible with the new framework where certain rd costs are based on full rd and certain others are based on modeled rd or are not computed. In this patch the existing rd based method is still kept for use in the USE_FULL_RD mode. In the other modes, the count based method is used. However the recommendation is to remove it eventually since the benefit is limited, and will remove a lot of complications in the code (3) Finally a bug is fixed with the existing use_largest_txfm speed feature that causes mismatches when the lossless mode and 4x4 WH transform is forced. Results on derf: USE_FULL_RD: +0.03% (due to change in the tables), 0% encode time reduction USE_LARGESTINTRA: -0.21%, 15% encode time reduction (this one is a pretty good compromise) USE_LARGESTINTRA_MODELINTER: -0.98%, 22% encode time reduction (currently the benefit of modeling is limited for txfm size selection, but keeping this enum as a placeholder) . USE_LARGESTALL: -1.05%, 27% encode-time reduction (same as existing use_largest_txfm speed feature). Change-Id: I4d60a5f9ce78fbc90cddf2f97ed91d8bc0d4f936
2013-06-22 01:31:12 +02:00
int frame_type = get_frame_type(cpi);
cpi->common.txfm_mode =
cpi->rd_tx_select_threshes[frame_type][ALLOW_32X32]
> cpi->rd_tx_select_threshes[frame_type][TX_MODE_SELECT] ?
ALLOW_32X32 : TX_MODE_SELECT;
} else {
unsigned int total = 0;
int i;
for (i = 0; i < TX_SIZE_MAX_SB; ++i)
total += cpi->txfm_stepdown_count[i];
if (total) {
double fraction = (double)cpi->txfm_stepdown_count[0] / total;
cpi->common.txfm_mode = fraction > 0.90 ? ALLOW_32X32 : TX_MODE_SELECT;
// printf("fraction = %f\n", fraction);
} // else keep unchanged
}
}
}
void vp9_encode_frame(VP9_COMP *cpi) {
VP9_COMMON * const cm = &cpi->common;
// In the longer term the encoder should be generalized to match the
// decoder such that we allow compound where one of the 3 buffers has a
// differnt sign bias and that buffer is then the fixed ref. However, this
// requires further work in the rd loop. For now the only supported encoder
// side behaviour is where the ALT ref buffer has oppositie sign bias to
// the other two.
if ((cm->ref_frame_sign_bias[ALTREF_FRAME]
Tx size selection enhancements (1) Refines the modeling function and uses that to add some speed features. Specifically, intead of using a flag use_largest_txfm as a speed feature, an enum tx_size_search_method is used, of which two of the types are USE_FULL_RD and USE_LARGESTALL. Two other new types are added: USE_LARGESTINTRA (use largest only for intra) USE_LARGESTINTRA_MODELINTER (use largest for intra, and model for inter) (2) Another change is that the framework for deciding transform type is simplified to use a heuristic count based method rather than an rd based method using txfm_cache. In practice the new method is found to work just as well - with derf only -0.01 down. The new method is more compatible with the new framework where certain rd costs are based on full rd and certain others are based on modeled rd or are not computed. In this patch the existing rd based method is still kept for use in the USE_FULL_RD mode. In the other modes, the count based method is used. However the recommendation is to remove it eventually since the benefit is limited, and will remove a lot of complications in the code (3) Finally a bug is fixed with the existing use_largest_txfm speed feature that causes mismatches when the lossless mode and 4x4 WH transform is forced. Results on derf: USE_FULL_RD: +0.03% (due to change in the tables), 0% encode time reduction USE_LARGESTINTRA: -0.21%, 15% encode time reduction (this one is a pretty good compromise) USE_LARGESTINTRA_MODELINTER: -0.98%, 22% encode time reduction (currently the benefit of modeling is limited for txfm size selection, but keeping this enum as a placeholder) . USE_LARGESTALL: -1.05%, 27% encode-time reduction (same as existing use_largest_txfm speed feature). Change-Id: I4d60a5f9ce78fbc90cddf2f97ed91d8bc0d4f936
2013-06-22 01:31:12 +02:00
== cm->ref_frame_sign_bias[GOLDEN_FRAME])
|| (cm->ref_frame_sign_bias[ALTREF_FRAME]
== cm->ref_frame_sign_bias[LAST_FRAME])) {
cm->allow_comp_inter_inter = 0;
} else {
cm->allow_comp_inter_inter = 1;
cm->comp_fixed_ref = ALTREF_FRAME;
cm->comp_var_ref[0] = LAST_FRAME;
cm->comp_var_ref[1] = GOLDEN_FRAME;
}
if (cpi->sf.RD) {
Tx size selection enhancements (1) Refines the modeling function and uses that to add some speed features. Specifically, intead of using a flag use_largest_txfm as a speed feature, an enum tx_size_search_method is used, of which two of the types are USE_FULL_RD and USE_LARGESTALL. Two other new types are added: USE_LARGESTINTRA (use largest only for intra) USE_LARGESTINTRA_MODELINTER (use largest for intra, and model for inter) (2) Another change is that the framework for deciding transform type is simplified to use a heuristic count based method rather than an rd based method using txfm_cache. In practice the new method is found to work just as well - with derf only -0.01 down. The new method is more compatible with the new framework where certain rd costs are based on full rd and certain others are based on modeled rd or are not computed. In this patch the existing rd based method is still kept for use in the USE_FULL_RD mode. In the other modes, the count based method is used. However the recommendation is to remove it eventually since the benefit is limited, and will remove a lot of complications in the code (3) Finally a bug is fixed with the existing use_largest_txfm speed feature that causes mismatches when the lossless mode and 4x4 WH transform is forced. Results on derf: USE_FULL_RD: +0.03% (due to change in the tables), 0% encode time reduction USE_LARGESTINTRA: -0.21%, 15% encode time reduction (this one is a pretty good compromise) USE_LARGESTINTRA_MODELINTER: -0.98%, 22% encode time reduction (currently the benefit of modeling is limited for txfm size selection, but keeping this enum as a placeholder) . USE_LARGESTALL: -1.05%, 27% encode-time reduction (same as existing use_largest_txfm speed feature). Change-Id: I4d60a5f9ce78fbc90cddf2f97ed91d8bc0d4f936
2013-06-22 01:31:12 +02:00
int i, pred_type;
INTERPOLATIONFILTERTYPE filter_type;
/*
* This code does a single RD pass over the whole frame assuming
* either compound, single or hybrid prediction as per whatever has
* worked best for that type of frame in the past.
* It also predicts whether another coding mode would have worked
* better that this coding mode. If that is the case, it remembers
* that for subsequent frames.
* It does the same analysis for transform size selection also.
*/
Tx size selection enhancements (1) Refines the modeling function and uses that to add some speed features. Specifically, intead of using a flag use_largest_txfm as a speed feature, an enum tx_size_search_method is used, of which two of the types are USE_FULL_RD and USE_LARGESTALL. Two other new types are added: USE_LARGESTINTRA (use largest only for intra) USE_LARGESTINTRA_MODELINTER (use largest for intra, and model for inter) (2) Another change is that the framework for deciding transform type is simplified to use a heuristic count based method rather than an rd based method using txfm_cache. In practice the new method is found to work just as well - with derf only -0.01 down. The new method is more compatible with the new framework where certain rd costs are based on full rd and certain others are based on modeled rd or are not computed. In this patch the existing rd based method is still kept for use in the USE_FULL_RD mode. In the other modes, the count based method is used. However the recommendation is to remove it eventually since the benefit is limited, and will remove a lot of complications in the code (3) Finally a bug is fixed with the existing use_largest_txfm speed feature that causes mismatches when the lossless mode and 4x4 WH transform is forced. Results on derf: USE_FULL_RD: +0.03% (due to change in the tables), 0% encode time reduction USE_LARGESTINTRA: -0.21%, 15% encode time reduction (this one is a pretty good compromise) USE_LARGESTINTRA_MODELINTER: -0.98%, 22% encode time reduction (currently the benefit of modeling is limited for txfm size selection, but keeping this enum as a placeholder) . USE_LARGESTALL: -1.05%, 27% encode-time reduction (same as existing use_largest_txfm speed feature). Change-Id: I4d60a5f9ce78fbc90cddf2f97ed91d8bc0d4f936
2013-06-22 01:31:12 +02:00
int frame_type = get_frame_type(cpi);
/* prediction (compound, single or hybrid) mode selection */
if (frame_type == 3 || !cm->allow_comp_inter_inter)
pred_type = SINGLE_PREDICTION_ONLY;
else if (cpi->rd_prediction_type_threshes[frame_type][1]
Tx size selection enhancements (1) Refines the modeling function and uses that to add some speed features. Specifically, intead of using a flag use_largest_txfm as a speed feature, an enum tx_size_search_method is used, of which two of the types are USE_FULL_RD and USE_LARGESTALL. Two other new types are added: USE_LARGESTINTRA (use largest only for intra) USE_LARGESTINTRA_MODELINTER (use largest for intra, and model for inter) (2) Another change is that the framework for deciding transform type is simplified to use a heuristic count based method rather than an rd based method using txfm_cache. In practice the new method is found to work just as well - with derf only -0.01 down. The new method is more compatible with the new framework where certain rd costs are based on full rd and certain others are based on modeled rd or are not computed. In this patch the existing rd based method is still kept for use in the USE_FULL_RD mode. In the other modes, the count based method is used. However the recommendation is to remove it eventually since the benefit is limited, and will remove a lot of complications in the code (3) Finally a bug is fixed with the existing use_largest_txfm speed feature that causes mismatches when the lossless mode and 4x4 WH transform is forced. Results on derf: USE_FULL_RD: +0.03% (due to change in the tables), 0% encode time reduction USE_LARGESTINTRA: -0.21%, 15% encode time reduction (this one is a pretty good compromise) USE_LARGESTINTRA_MODELINTER: -0.98%, 22% encode time reduction (currently the benefit of modeling is limited for txfm size selection, but keeping this enum as a placeholder) . USE_LARGESTALL: -1.05%, 27% encode-time reduction (same as existing use_largest_txfm speed feature). Change-Id: I4d60a5f9ce78fbc90cddf2f97ed91d8bc0d4f936
2013-06-22 01:31:12 +02:00
> cpi->rd_prediction_type_threshes[frame_type][0]
&& cpi->rd_prediction_type_threshes[frame_type][1]
> cpi->rd_prediction_type_threshes[frame_type][2]
&& check_dual_ref_flags(cpi) && cpi->static_mb_pct == 100)
pred_type = COMP_PREDICTION_ONLY;
else if (cpi->rd_prediction_type_threshes[frame_type][0]
Tx size selection enhancements (1) Refines the modeling function and uses that to add some speed features. Specifically, intead of using a flag use_largest_txfm as a speed feature, an enum tx_size_search_method is used, of which two of the types are USE_FULL_RD and USE_LARGESTALL. Two other new types are added: USE_LARGESTINTRA (use largest only for intra) USE_LARGESTINTRA_MODELINTER (use largest for intra, and model for inter) (2) Another change is that the framework for deciding transform type is simplified to use a heuristic count based method rather than an rd based method using txfm_cache. In practice the new method is found to work just as well - with derf only -0.01 down. The new method is more compatible with the new framework where certain rd costs are based on full rd and certain others are based on modeled rd or are not computed. In this patch the existing rd based method is still kept for use in the USE_FULL_RD mode. In the other modes, the count based method is used. However the recommendation is to remove it eventually since the benefit is limited, and will remove a lot of complications in the code (3) Finally a bug is fixed with the existing use_largest_txfm speed feature that causes mismatches when the lossless mode and 4x4 WH transform is forced. Results on derf: USE_FULL_RD: +0.03% (due to change in the tables), 0% encode time reduction USE_LARGESTINTRA: -0.21%, 15% encode time reduction (this one is a pretty good compromise) USE_LARGESTINTRA_MODELINTER: -0.98%, 22% encode time reduction (currently the benefit of modeling is limited for txfm size selection, but keeping this enum as a placeholder) . USE_LARGESTALL: -1.05%, 27% encode-time reduction (same as existing use_largest_txfm speed feature). Change-Id: I4d60a5f9ce78fbc90cddf2f97ed91d8bc0d4f936
2013-06-22 01:31:12 +02:00
> cpi->rd_prediction_type_threshes[frame_type][2])
pred_type = SINGLE_PREDICTION_ONLY;
else
pred_type = HYBRID_PREDICTION;
/* filter type selection */
// FIXME(rbultje) for some odd reason, we often select smooth_filter
// as default filter for ARF overlay frames. This is a REALLY BAD
// IDEA so we explicitely disable it here.
if (frame_type != 3 &&
cpi->rd_filter_threshes[frame_type][1] >
cpi->rd_filter_threshes[frame_type][0] &&
cpi->rd_filter_threshes[frame_type][1] >
cpi->rd_filter_threshes[frame_type][2] &&
cpi->rd_filter_threshes[frame_type][1] >
cpi->rd_filter_threshes[frame_type][VP9_SWITCHABLE_FILTERS]) {
filter_type = vp9_switchable_interp[1];
} else if (cpi->rd_filter_threshes[frame_type][2] >
cpi->rd_filter_threshes[frame_type][0] &&
cpi->rd_filter_threshes[frame_type][2] >
cpi->rd_filter_threshes[frame_type][VP9_SWITCHABLE_FILTERS]) {
filter_type = vp9_switchable_interp[2];
} else if (cpi->rd_filter_threshes[frame_type][0] >
cpi->rd_filter_threshes[frame_type][VP9_SWITCHABLE_FILTERS]) {
filter_type = vp9_switchable_interp[0];
} else {
filter_type = SWITCHABLE;
}
/* transform size (4x4, 8x8, 16x16 or select-per-mb) selection */
cpi->mb.e_mbd.lossless = 0;
if (cpi->oxcf.lossless) {
cpi->mb.e_mbd.lossless = 1;
Tx size selection enhancements (1) Refines the modeling function and uses that to add some speed features. Specifically, intead of using a flag use_largest_txfm as a speed feature, an enum tx_size_search_method is used, of which two of the types are USE_FULL_RD and USE_LARGESTALL. Two other new types are added: USE_LARGESTINTRA (use largest only for intra) USE_LARGESTINTRA_MODELINTER (use largest for intra, and model for inter) (2) Another change is that the framework for deciding transform type is simplified to use a heuristic count based method rather than an rd based method using txfm_cache. In practice the new method is found to work just as well - with derf only -0.01 down. The new method is more compatible with the new framework where certain rd costs are based on full rd and certain others are based on modeled rd or are not computed. In this patch the existing rd based method is still kept for use in the USE_FULL_RD mode. In the other modes, the count based method is used. However the recommendation is to remove it eventually since the benefit is limited, and will remove a lot of complications in the code (3) Finally a bug is fixed with the existing use_largest_txfm speed feature that causes mismatches when the lossless mode and 4x4 WH transform is forced. Results on derf: USE_FULL_RD: +0.03% (due to change in the tables), 0% encode time reduction USE_LARGESTINTRA: -0.21%, 15% encode time reduction (this one is a pretty good compromise) USE_LARGESTINTRA_MODELINTER: -0.98%, 22% encode time reduction (currently the benefit of modeling is limited for txfm size selection, but keeping this enum as a placeholder) . USE_LARGESTALL: -1.05%, 27% encode-time reduction (same as existing use_largest_txfm speed feature). Change-Id: I4d60a5f9ce78fbc90cddf2f97ed91d8bc0d4f936
2013-06-22 01:31:12 +02:00
}
select_txfm_mode(cpi);
cpi->common.comp_pred_mode = pred_type;
cpi->common.mcomp_filter_type = filter_type;
encode_frame_internal(cpi);
for (i = 0; i < NB_PREDICTION_TYPES; ++i) {
const int diff = (int) (cpi->rd_comp_pred_diff[i] / cpi->common.MBs);
cpi->rd_prediction_type_threshes[frame_type][i] += diff;
cpi->rd_prediction_type_threshes[frame_type][i] >>= 1;
}
for (i = 0; i <= VP9_SWITCHABLE_FILTERS; i++) {
const int64_t diff = cpi->rd_filter_diff[i] / cpi->common.MBs;
cpi->rd_filter_threshes[frame_type][i] =
(cpi->rd_filter_threshes[frame_type][i] + diff) / 2;
}
for (i = 0; i < NB_TXFM_MODES; ++i) {
int64_t pd = cpi->rd_tx_select_diff[i];
int diff;
if (i == TX_MODE_SELECT)
32x32 transform for superblocks. This adds Debargha's DCT/DWT hybrid and a regular 32x32 DCT, and adds code all over the place to wrap that in the bitstream/encoder/decoder/RD. Some implementation notes (these probably need careful review): - token range is extended by 1 bit, since the value range out of this transform is [-16384,16383]. - the coefficients coming out of the FDCT are manually scaled back by 1 bit, or else they won't fit in int16_t (they are 17 bits). Because of this, the RD error scoring does not right-shift the MSE score by two (unlike for 4x4/8x8/16x16). - to compensate for this loss in precision, the quantizer is halved also. This is currently a little hacky. - FDCT and IDCT is double-only right now. Needs a fixed-point impl. - There are no default probabilities for the 32x32 transform yet; I'm simply using the 16x16 luma ones. A future commit will add newly generated probabilities for all transforms. - No ADST version. I don't think we'll add one for this level; if an ADST is desired, transform-size selection can scale back to 16x16 or lower, and use an ADST at that level. Additional notes specific to Debargha's DWT/DCT hybrid: - coefficient scale is different for the top/left 16x16 (DCT-over-DWT) block than for the rest (DWT pixel differences) of the block. Therefore, RD error scoring isn't easily scalable between coefficient and pixel domain. Thus, unfortunately, we need to compute the RD distortion in the pixel domain until we figure out how to scale these appropriately. Change-Id: I00386f20f35d7fabb19aba94c8162f8aee64ef2b
2012-12-07 23:45:05 +01:00
pd -= RDCOST(cpi->mb.rdmult, cpi->mb.rddiv,
Tx size selection enhancements (1) Refines the modeling function and uses that to add some speed features. Specifically, intead of using a flag use_largest_txfm as a speed feature, an enum tx_size_search_method is used, of which two of the types are USE_FULL_RD and USE_LARGESTALL. Two other new types are added: USE_LARGESTINTRA (use largest only for intra) USE_LARGESTINTRA_MODELINTER (use largest for intra, and model for inter) (2) Another change is that the framework for deciding transform type is simplified to use a heuristic count based method rather than an rd based method using txfm_cache. In practice the new method is found to work just as well - with derf only -0.01 down. The new method is more compatible with the new framework where certain rd costs are based on full rd and certain others are based on modeled rd or are not computed. In this patch the existing rd based method is still kept for use in the USE_FULL_RD mode. In the other modes, the count based method is used. However the recommendation is to remove it eventually since the benefit is limited, and will remove a lot of complications in the code (3) Finally a bug is fixed with the existing use_largest_txfm speed feature that causes mismatches when the lossless mode and 4x4 WH transform is forced. Results on derf: USE_FULL_RD: +0.03% (due to change in the tables), 0% encode time reduction USE_LARGESTINTRA: -0.21%, 15% encode time reduction (this one is a pretty good compromise) USE_LARGESTINTRA_MODELINTER: -0.98%, 22% encode time reduction (currently the benefit of modeling is limited for txfm size selection, but keeping this enum as a placeholder) . USE_LARGESTALL: -1.05%, 27% encode-time reduction (same as existing use_largest_txfm speed feature). Change-Id: I4d60a5f9ce78fbc90cddf2f97ed91d8bc0d4f936
2013-06-22 01:31:12 +02:00
2048 * (TX_SIZE_MAX_SB - 1), 0);
diff = (int) (pd / cpi->common.MBs);
cpi->rd_tx_select_threshes[frame_type][i] += diff;
cpi->rd_tx_select_threshes[frame_type][i] /= 2;
}
if (cpi->common.comp_pred_mode == HYBRID_PREDICTION) {
int single_count_zero = 0;
int comp_count_zero = 0;
for (i = 0; i < COMP_INTER_CONTEXTS; i++) {
single_count_zero += cpi->comp_inter_count[i][0];
comp_count_zero += cpi->comp_inter_count[i][1];
}
if (comp_count_zero == 0) {
cpi->common.comp_pred_mode = SINGLE_PREDICTION_ONLY;
vp9_zero(cpi->comp_inter_count);
} else if (single_count_zero == 0) {
cpi->common.comp_pred_mode = COMP_PREDICTION_ONLY;
vp9_zero(cpi->comp_inter_count);
}
}
if (cpi->common.txfm_mode == TX_MODE_SELECT) {
int count4x4 = 0;
int count8x8_lp = 0, count8x8_8x8p = 0;
int count16x16_16x16p = 0, count16x16_lp = 0;
int count32x32 = 0;
for (i = 0; i < TX_SIZE_CONTEXTS; i++)
count4x4 += cm->fc.tx_count_32x32p[i][TX_4X4];
for (i = 0; i < TX_SIZE_CONTEXTS; i++)
count4x4 += cm->fc.tx_count_16x16p[i][TX_4X4];
for (i = 0; i < TX_SIZE_CONTEXTS; i++)
count4x4 += cm->fc.tx_count_8x8p[i][TX_4X4];
for (i = 0; i < TX_SIZE_CONTEXTS; i++)
count8x8_lp += cm->fc.tx_count_32x32p[i][TX_8X8];
for (i = 0; i < TX_SIZE_CONTEXTS; i++)
count8x8_lp += cm->fc.tx_count_16x16p[i][TX_8X8];
for (i = 0; i < TX_SIZE_CONTEXTS; i++)
count8x8_8x8p += cm->fc.tx_count_8x8p[i][TX_8X8];
for (i = 0; i < TX_SIZE_CONTEXTS; i++)
count16x16_16x16p += cm->fc.tx_count_16x16p[i][TX_16X16];
for (i = 0; i < TX_SIZE_CONTEXTS; i++)
count16x16_lp += cm->fc.tx_count_32x32p[i][TX_16X16];
for (i = 0; i < TX_SIZE_CONTEXTS; i++)
count32x32 += cm->fc.tx_count_32x32p[i][TX_32X32];
if (count4x4 == 0 && count16x16_lp == 0 && count16x16_16x16p == 0
&& count32x32 == 0) {
cpi->common.txfm_mode = ALLOW_8X8;
reset_skip_txfm_size(cpi, TX_8X8);
} else if (count8x8_8x8p == 0 && count16x16_16x16p == 0
Tx size selection enhancements (1) Refines the modeling function and uses that to add some speed features. Specifically, intead of using a flag use_largest_txfm as a speed feature, an enum tx_size_search_method is used, of which two of the types are USE_FULL_RD and USE_LARGESTALL. Two other new types are added: USE_LARGESTINTRA (use largest only for intra) USE_LARGESTINTRA_MODELINTER (use largest for intra, and model for inter) (2) Another change is that the framework for deciding transform type is simplified to use a heuristic count based method rather than an rd based method using txfm_cache. In practice the new method is found to work just as well - with derf only -0.01 down. The new method is more compatible with the new framework where certain rd costs are based on full rd and certain others are based on modeled rd or are not computed. In this patch the existing rd based method is still kept for use in the USE_FULL_RD mode. In the other modes, the count based method is used. However the recommendation is to remove it eventually since the benefit is limited, and will remove a lot of complications in the code (3) Finally a bug is fixed with the existing use_largest_txfm speed feature that causes mismatches when the lossless mode and 4x4 WH transform is forced. Results on derf: USE_FULL_RD: +0.03% (due to change in the tables), 0% encode time reduction USE_LARGESTINTRA: -0.21%, 15% encode time reduction (this one is a pretty good compromise) USE_LARGESTINTRA_MODELINTER: -0.98%, 22% encode time reduction (currently the benefit of modeling is limited for txfm size selection, but keeping this enum as a placeholder) . USE_LARGESTALL: -1.05%, 27% encode-time reduction (same as existing use_largest_txfm speed feature). Change-Id: I4d60a5f9ce78fbc90cddf2f97ed91d8bc0d4f936
2013-06-22 01:31:12 +02:00
&& count8x8_lp == 0 && count16x16_lp == 0 && count32x32 == 0) {
cpi->common.txfm_mode = ONLY_4X4;
reset_skip_txfm_size(cpi, TX_4X4);
32x32 transform for superblocks. This adds Debargha's DCT/DWT hybrid and a regular 32x32 DCT, and adds code all over the place to wrap that in the bitstream/encoder/decoder/RD. Some implementation notes (these probably need careful review): - token range is extended by 1 bit, since the value range out of this transform is [-16384,16383]. - the coefficients coming out of the FDCT are manually scaled back by 1 bit, or else they won't fit in int16_t (they are 17 bits). Because of this, the RD error scoring does not right-shift the MSE score by two (unlike for 4x4/8x8/16x16). - to compensate for this loss in precision, the quantizer is halved also. This is currently a little hacky. - FDCT and IDCT is double-only right now. Needs a fixed-point impl. - There are no default probabilities for the 32x32 transform yet; I'm simply using the 16x16 luma ones. A future commit will add newly generated probabilities for all transforms. - No ADST version. I don't think we'll add one for this level; if an ADST is desired, transform-size selection can scale back to 16x16 or lower, and use an ADST at that level. Additional notes specific to Debargha's DWT/DCT hybrid: - coefficient scale is different for the top/left 16x16 (DCT-over-DWT) block than for the rest (DWT pixel differences) of the block. Therefore, RD error scoring isn't easily scalable between coefficient and pixel domain. Thus, unfortunately, we need to compute the RD distortion in the pixel domain until we figure out how to scale these appropriately. Change-Id: I00386f20f35d7fabb19aba94c8162f8aee64ef2b
2012-12-07 23:45:05 +01:00
} else if (count8x8_lp == 0 && count16x16_lp == 0 && count4x4 == 0) {
cpi->common.txfm_mode = ALLOW_32X32;
} else if (count32x32 == 0 && count8x8_lp == 0 && count4x4 == 0) {
cpi->common.txfm_mode = ALLOW_16X16;
32x32 transform for superblocks. This adds Debargha's DCT/DWT hybrid and a regular 32x32 DCT, and adds code all over the place to wrap that in the bitstream/encoder/decoder/RD. Some implementation notes (these probably need careful review): - token range is extended by 1 bit, since the value range out of this transform is [-16384,16383]. - the coefficients coming out of the FDCT are manually scaled back by 1 bit, or else they won't fit in int16_t (they are 17 bits). Because of this, the RD error scoring does not right-shift the MSE score by two (unlike for 4x4/8x8/16x16). - to compensate for this loss in precision, the quantizer is halved also. This is currently a little hacky. - FDCT and IDCT is double-only right now. Needs a fixed-point impl. - There are no default probabilities for the 32x32 transform yet; I'm simply using the 16x16 luma ones. A future commit will add newly generated probabilities for all transforms. - No ADST version. I don't think we'll add one for this level; if an ADST is desired, transform-size selection can scale back to 16x16 or lower, and use an ADST at that level. Additional notes specific to Debargha's DWT/DCT hybrid: - coefficient scale is different for the top/left 16x16 (DCT-over-DWT) block than for the rest (DWT pixel differences) of the block. Therefore, RD error scoring isn't easily scalable between coefficient and pixel domain. Thus, unfortunately, we need to compute the RD distortion in the pixel domain until we figure out how to scale these appropriately. Change-Id: I00386f20f35d7fabb19aba94c8162f8aee64ef2b
2012-12-07 23:45:05 +01:00
reset_skip_txfm_size(cpi, TX_16X16);
}
}
} else {
encode_frame_internal(cpi);
}
}
static void sum_intra_stats(VP9_COMP *cpi, MACROBLOCK *x) {
const MACROBLOCKD *xd = &x->e_mbd;
const MB_PREDICTION_MODE m = xd->mode_info_context->mbmi.mode;
const MB_PREDICTION_MODE uvm = xd->mode_info_context->mbmi.uv_mode;
2010-05-18 17:58:33 +02:00
++cpi->y_uv_mode_count[m][uvm];
if (xd->mode_info_context->mbmi.sb_type >= BLOCK_SIZE_SB8X8) {
const BLOCK_SIZE_TYPE bsize = xd->mode_info_context->mbmi.sb_type;
const int bwl = b_width_log2(bsize), bhl = b_height_log2(bsize);
const int bsl = MIN(bwl, bhl);
++cpi->y_mode_count[MIN(bsl, 3)][m];
} else {
int idx, idy;
int bw = 1 << b_width_log2(xd->mode_info_context->mbmi.sb_type);
int bh = 1 << b_height_log2(xd->mode_info_context->mbmi.sb_type);
for (idy = 0; idy < 2; idy += bh) {
for (idx = 0; idx < 2; idx += bw) {
int m = xd->mode_info_context->bmi[idy * 2 + idx].as_mode;
++cpi->y_mode_count[0][m];
}
}
}
2010-05-18 17:58:33 +02:00
}
// Experimental stub function to create a per MB zbin adjustment based on
// some previously calculated measure of MB activity.
static void adjust_act_zbin(VP9_COMP *cpi, MACROBLOCK *x) {
#if USE_ACT_INDEX
x->act_zbin_adj = *(x->mb_activity_ptr);
#else
int64_t a;
int64_t b;
int64_t act = *(x->mb_activity_ptr);
// Apply the masking to the RD multiplier.
a = act + 4 * cpi->activity_avg;
b = 4 * act + cpi->activity_avg;
if (act > cpi->activity_avg)
x->act_zbin_adj = (int) (((int64_t) b + (a >> 1)) / a) - 1;
else
x->act_zbin_adj = 1 - (int) (((int64_t) a + (b >> 1)) / b);
#endif
}
static void encode_superblock(VP9_COMP *cpi, TOKENEXTRA **t, int output_enabled,
int mi_row, int mi_col, BLOCK_SIZE_TYPE bsize) {
VP9_COMMON * const cm = &cpi->common;
MACROBLOCK * const x = &cpi->mb;
MACROBLOCKD * const xd = &x->e_mbd;
MODE_INFO *mi = xd->mode_info_context;
MB_MODE_INFO *mbmi = &mi->mbmi;
unsigned int segment_id = mbmi->segment_id;
const int mis = cm->mode_info_stride;
const int bwl = mi_width_log2(bsize);
const int bw = 1 << bwl, bh = 1 << mi_height_log2(bsize);
x->rd_search = 0;
if (cm->frame_type == KEY_FRAME) {
if (cpi->oxcf.tuning == VP8_TUNE_SSIM) {
adjust_act_zbin(cpi, x);
vp9_update_zbin_extra(cpi, x);
}
} else {
vp9_setup_interp_filters(xd, mbmi->interp_filter, cm);
if (cpi->oxcf.tuning == VP8_TUNE_SSIM) {
// Adjust the zbin based on this MB rate.
adjust_act_zbin(cpi, x);
}
// Experimental code. Special case for gf and arf zeromv modes.
// Increase zbin size to suppress noise
cpi->zbin_mode_boost = 0;
if (cpi->zbin_mode_boost_enabled) {
if (mbmi->ref_frame[0] != INTRA_FRAME) {
if (mbmi->mode == ZEROMV) {
if (mbmi->ref_frame[0] != LAST_FRAME)
cpi->zbin_mode_boost = GF_ZEROMV_ZBIN_BOOST;
else
cpi->zbin_mode_boost = LF_ZEROMV_ZBIN_BOOST;
} else if (mbmi->sb_type < BLOCK_SIZE_SB8X8) {
cpi->zbin_mode_boost = SPLIT_MV_ZBIN_BOOST;
} else {
cpi->zbin_mode_boost = MV_ZBIN_BOOST;
}
} else {
cpi->zbin_mode_boost = INTRA_ZBIN_BOOST;
}
}
vp9_update_zbin_extra(cpi, x);
}
if (mbmi->ref_frame[0] == INTRA_FRAME) {
vp9_encode_intra_block_y(
cm, x, (bsize < BLOCK_SIZE_SB8X8) ? BLOCK_SIZE_SB8X8 : bsize);
vp9_encode_intra_block_uv(
cm, x, (bsize < BLOCK_SIZE_SB8X8) ? BLOCK_SIZE_SB8X8 : bsize);
if (output_enabled)
sum_intra_stats(cpi, x);
} else {
int idx = cm->ref_frame_map[get_ref_frame_idx(cpi, mbmi->ref_frame[0])];
YV12_BUFFER_CONFIG *ref_fb = &cm->yv12_fb[idx];
YV12_BUFFER_CONFIG *second_ref_fb = NULL;
if (mbmi->ref_frame[1] > 0) {
idx = cm->ref_frame_map[get_ref_frame_idx(cpi, mbmi->ref_frame[1])];
second_ref_fb = &cm->yv12_fb[idx];
}
assert(cm->frame_type != KEY_FRAME);
setup_pre_planes(xd, 0, ref_fb, mi_row, mi_col,
&xd->scale_factor[0], &xd->scale_factor_uv[0]);
setup_pre_planes(xd, 1, second_ref_fb, mi_row, mi_col,
&xd->scale_factor[1], &xd->scale_factor_uv[1]);
vp9_build_inter_predictors_sb(
xd, mi_row, mi_col,
bsize < BLOCK_SIZE_SB8X8 ? BLOCK_SIZE_SB8X8 : bsize);
}
if (xd->mode_info_context->mbmi.ref_frame[0] == INTRA_FRAME) {
vp9_tokenize_sb(cpi, t, !output_enabled,
(bsize < BLOCK_SIZE_SB8X8) ? BLOCK_SIZE_SB8X8 : bsize);
} else if (!x->skip) {
vp9_encode_sb(cm, x, (bsize < BLOCK_SIZE_SB8X8) ? BLOCK_SIZE_SB8X8 : bsize);
vp9_tokenize_sb(cpi, t, !output_enabled,
(bsize < BLOCK_SIZE_SB8X8) ? BLOCK_SIZE_SB8X8 : bsize);
} else {
int mb_skip_context = xd->left_available ? (mi - 1)->mbmi.mb_skip_coeff : 0;
mb_skip_context += (mi - mis)->mbmi.mb_skip_coeff;
mbmi->mb_skip_coeff = 1;
if (output_enabled)
cm->fc.mbskip_count[mb_skip_context][1]++;
vp9_reset_sb_tokens_context(
xd, (bsize < BLOCK_SIZE_SB8X8) ? BLOCK_SIZE_SB8X8 : bsize);
}
// copy skip flag on all mb_mode_info contexts in this SB
// if this was a skip at this txfm size
vp9_set_pred_flag_mbskip(xd, bsize, mi->mbmi.mb_skip_coeff);
if (output_enabled) {
if (cm->txfm_mode == TX_MODE_SELECT &&
mbmi->sb_type >= BLOCK_SIZE_SB8X8 &&
!(mbmi->ref_frame[0] != INTRA_FRAME &&
(mbmi->mb_skip_coeff ||
vp9_segfeature_active(&xd->seg, segment_id, SEG_LVL_SKIP)))) {
const int context = vp9_get_pred_context_tx_size(cm, xd);
if (bsize >= BLOCK_SIZE_SB32X32) {
cm->fc.tx_count_32x32p[context][mbmi->txfm_size]++;
} else if (bsize >= BLOCK_SIZE_MB16X16) {
cm->fc.tx_count_16x16p[context][mbmi->txfm_size]++;
} else {
cm->fc.tx_count_8x8p[context][mbmi->txfm_size]++;
}
} else {
int x, y;
TX_SIZE sz = (cm->txfm_mode == TX_MODE_SELECT) ? TX_32X32 : cm->txfm_mode;
// The new intra coding scheme requires no change of transform size
if (mi->mbmi.ref_frame[0] != INTRA_FRAME) {
if (sz == TX_32X32 && bsize < BLOCK_SIZE_SB32X32)
sz = TX_16X16;
if (sz == TX_16X16 && bsize < BLOCK_SIZE_MB16X16)
sz = TX_8X8;
if (sz == TX_8X8 && bsize < BLOCK_SIZE_SB8X8)
sz = TX_4X4;
} else if (bsize >= BLOCK_SIZE_SB8X8) {
sz = mbmi->txfm_size;
} else {
sz = TX_4X4;
}
for (y = 0; y < bh; y++) {
for (x = 0; x < bw; x++) {
if (mi_col + x < cm->mi_cols && mi_row + y < cm->mi_rows) {
mi[mis * y + x].mbmi.txfm_size = sz;
}
}
}
}
}
}