Prepare for 1.0.0r release

Reviewed-by: Richard Levitte <levitte@openssl.org>

.cvsignore

@@ -0,0 +1,22 @@
+openssl.pc
+libcrypto.pc
+libssl.pc
+MINFO
+makefile.one
+tmp
+out
+outinc
+rehash.time
+testlog
+make.log
+maketest.log
+cctest
+cctest.c
+cctest.a
+*.flc
+semantic.cache
+Makefile
+*.dll*
+*.so*
+*.sl*
+*.dylib*

.gitignore

@@ -5,32 +5,32 @@
 # editor artefacts
 *.swp
 .#*
-\#*#
+#*#
 *~
-/.dir-locals.el
 
 # Top level excludes
-/Makefile.orig
-/MINFO
-/TABLE
+/Makefile.bak
+/Makefile
 /*.a
+/include
 /*.pc
 /rehash.time
-/inc.*
-/makefile.*
-/out.*
-/tmp.*
-/configdata.pm
 
-# *all* Makefiles
-Makefile
+# Most *.c files under test/ are symlinks
+/test/*.c
+# Apart from these
+!/test/asn1test.c
+!/test/methtest.c
+!/test/dummytest.c
+!/test/igetest.c
+!/test/r160test.c
+!/test/fips_algvs.c
 
 /test/*.ss
 /test/*.srl
 /test/.rnd
 /test/test*.pem
 /test/newkey.pem
-/test/*.log
 
 # Certificate symbolic links
 *.0
@@ -42,23 +42,32 @@ Makefile
 
 # Auto generated headers
 /crypto/buildinf.h
-/openssl/include/opensslconf.h
-/crypto/include/internal/*_conf.h
-util/domd
+/crypto/opensslconf.h
 
 # Auto generated assembly language source files
 *.s
-!/crypto/*/asm/*.s
-/crypto/arm*.S
-/crypto/*/*.S
-*.asm
-!/crypto/*/asm/*.asm
+!/crypto/bn/asm/pa-risc2.s
+!/crypto/bn/asm/pa-risc2W.s
+crypto/aes/asm/a_win32.asm
+crypto/bf/asm/b_win32.asm
+crypto/bn/asm/bn_win32.asm
+crypto/bn/asm/co_win32.asm
+crypto/bn/asm/mt_win32.asm
+crypto/cast/asm/c_win32.asm
+crypto/cpu_win32.asm
+crypto/des/asm/d_win32.asm
+crypto/des/asm/y_win32.asm
+crypto/md5/asm/m5_win32.asm
+crypto/rc4/asm/r4_win32.asm
+crypto/rc5/asm/r5_win32.asm
+crypto/ripemd/asm/rm_win32.asm
+crypto/sha/asm/s1_win32.asm
+crypto/sha/asm/sha512-sse2.asm
 
 # Executables
 /apps/openssl
 /test/sha256t
 /test/sha512t
-/test/gost2814789t
 /test/*test
 /test/fips_aesavs
 /test/fips_desmovs
@@ -72,66 +81,29 @@ util/domd
 *.so*
 *.dylib*
 *.dll*
-*.exe
 # Exceptions
 !/test/bctest
 !/crypto/des/times/486-50.sol
 
 # Misc auto generated files
-/include/openssl/opensslconf.h
 /tools/c_rehash
-/crypto/**/lib
-/engines/**/lib
-/ssl/**/lib
+/test/evptests.txt
+lib
 Makefile.save
 *.bak
-/tags
-/TAGS
-cscope.out
-*.d
-/crypto.map
-/ssl.map
+tags
+TAGS
 
 # Windows
-/tmp32
-/tmp32.dbg
 /tmp32dll
 /tmp32dll.dbg
-/out32
-/out32.dbg
 /out32dll
 /out32dll.dbg
 /inc32
 /MINFO
-/ms/bcb.mak
-/ms/libeay32.def
-/ms/nt.mak
-/ms/ntdll.mak
-/ms/ssleay32.def
-/ms/version32.rc
-
-# Files created on other branches that are not held in git, and are not
-# needed on this branch
-/include/openssl/asn1_mac.h
-/include/openssl/des_old.h
-/include/openssl/fips.h
-/include/openssl/fips_rand.h
-/include/openssl/krb5_asn.h
-/include/openssl/kssl.h
-/include/openssl/pq_compat.h
-/include/openssl/ssl23.h
-/include/openssl/tmdiff.h
-/include/openssl/ui_compat.h
-/test/fips_aesavs.c
-/test/fips_desmovs.c
-/test/fips_dsatest.c
-/test/fips_dssvs.c
-/test/fips_hmactest.c
-/test/fips_randtest.c
-/test/fips_rngvs.c
-/test/fips_rsagtest.c
-/test/fips_rsastest.c
-/test/fips_rsavtest.c
-/test/fips_shatest.c
-/test/fips_test_suite.c
-/test/shatest.c
+ms/bcb.mak
+ms/libeay32.def
+ms/nt.mak
+ms/ntdll.mak
+ms/ssleay32.def
+ms/version32.rc

.travis-create-release.sh

@@ -1,12 +0,0 @@
-#! /bin/sh
-
-# $1 is expected to be $TRAVIS_OS_NAME
-
-./Configure dist
-if [ "$1" == osx ]; then
-    make NAME='_srcdist' TARFLAGS='-n' TARFILE='_srcdist.tar' \
-	 TAR_COMMAND='$(TAR) $(TARFLAGS) -s "|^|$(NAME)/|" -T $(TARFILE).list -cvf -' \
-	 SHELL='sh -vx' tar
-else
-    make TARFILE='_srcdist.tar' NAME='_srcdist' SHELL='sh -v' dist
-fi

.travis.yml

@@ -1,114 +0,0 @@
-language: c
-
-addons:
-    apt:
-        packages:
-            - clang-3.6
-            - gcc-5
-            - binutils-mingw-w64
-            - gcc-mingw-w64
-            - wine
-        sources:
-            - llvm-toolchain-precise-3.6
-            - ubuntu-toolchain-r-test
-
-os:
-    - linux
-    - osx
-
-compiler:
-    - clang
-    - clang-3.6
-    - gcc
-    - gcc-5
-    - i686-w64-mingw32-gcc
-    - x86_64-w64-mingw32-gcc
-
-env:
-    - CONFIG_OPTS=""
-    - CONFIG_OPTS="shared"
-    - CONFIG_OPTS="no-asm"
-    - CONFIG_OPTS="--debug --strict-warnings enable-crypto-mdebug enable-rc5 enable-md2"
-    - CONFIG_OPTS="--unified"
-    - CONFIG_OPTS="--unified shared"
-    - CONFIG_OPTS="--unified no-asm"
-    - CONFIG_OPTS="--unified --debug --strict-warnings enable-crypto-mdebug enable-rc5 enable-md2"
-
-matrix:
-    include:
-        - os: linux
-          compiler: clang-3.6
-          env: CONFIG_OPTS="-fsanitize=address"
-        - os: linux
-          compiler: clang-3.6
-          env: CONFIG_OPTS="no-asm --debug --strict-warnings -fno-sanitize-recover -fsanitize=address -fsanitize=undefined enable-crypto-mdebug enable-rc5 enable-md2"
-        - os: linux
-          compiler: gcc-5
-          env: CONFIG_OPTS="-fsanitize=address"
-        - os: linux
-          compiler: gcc-5
-          env: CONFIG_OPTS="no-asm --debug --strict-warnings -fno-sanitize-recover -fsanitize=address -fsanitize=undefined enable-crypto-mdebug enable-rc5 enable-md2"
-    exclude:
-        - os: osx
-          compiler: clang-3.6
-        - os: osx
-          compiler: gcc
-        - os: osx
-          compiler: gcc-5
-        - os: osx
-          compiler: i686-w64-mingw32-gcc
-        - os: osx
-          compiler: x86_64-w64-mingw32-gcc
-        - compiler: i686-w64-mingw32-gcc
-          env: CONFIG_OPTS="shared"
-        - compiler: x86_64-w64-mingw32-gcc
-          env: CONFIG_OPTS="shared"
-        - compiler: i686-w64-mingw32-gcc
-          env: CONFIG_OPTS="no-asm"
-        - compiler: x86_64-w64-mingw32-gcc
-          env: CONFIG_OPTS="no-asm"
-        - compiler: i686-w64-mingw32-gcc
-          env: CONFIG_OPTS="--unified shared"
-        - compiler: x86_64-w64-mingw32-gcc
-          env: CONFIG_OPTS="--unified shared"
-        - compiler: i686-w64-mingw32-gcc
-          env: CONFIG_OPTS="--unified no-asm"
-        - compiler: x86_64-w64-mingw32-gcc
-          env: CONFIG_OPTS="--unified no-asm"
-    allow_failures:
-        - compiler: i686-w64-mingw32-gcc
-          env: CONFIG_OPTS="--debug --strict-warnings enable-crypto-mdebug enable-rc5 enable-md2"
-        - compiler: x86_64-w64-mingw32-gcc
-          env: CONFIG_OPTS="--debug --strict-warnings enable-crypto-mdebug enable-rc5 enable-md2"
-        - compiler: i686-w64-mingw32-gcc
-          env: CONFIG_OPTS="--unified --debug --strict-warnings enable-crypto-mdebug enable-rc5 enable-md2"
-        - compiler: x86_64-w64-mingw32-gcc
-          env: CONFIG_OPTS="--unified --debug --strict-warnings enable-crypto-mdebug enable-rc5 enable-md2"
-
-before_script:
-    - sh .travis-create-release.sh $TRAVIS_OS_NAME
-    - tar -xvzf _srcdist.tar.gz
-    - cd _srcdist
-    - if [ "$CC" == i686-w64-mingw32-gcc ]; then
-          export CROSS_COMPILE=${CC%%gcc}; unset CC;
-          ./Configure mingw $CONFIG_OPTS -Wno-pedantic-ms-format;
-      elif [ "$CC" == x86_64-w64-mingw32-gcc ]; then
-          export CROSS_COMPILE=${CC%%gcc}; unset CC;
-          ./Configure mingw64 $CONFIG_OPTS -Wno-pedantic-ms-format;
-      else
-          ./config $CONFIG_OPTS;
-      fi
-    - cd ..
-
-script:
-    - cd _srcdist
-    - make
-    - if [ -n "$CROSS_COMPILE" ]; then
-          export EXE_SHELL="wine" WINEPREFIX=`pwd`;
-      fi
-    - HARNESS_VERBOSE=yes make test
-    - cd ..
-
-notifications:
-    email:
-        - openssl-commits@openssl.org

ACKNOWLEDGEMENTS

@@ -1,2 +0,0 @@
-Please https://www.openssl.org/community/thanks.html for the current
-acknowledgements.

ACKNOWLEDGMENTS

@@ -0,0 +1,30 @@
+The OpenSSL project depends on volunteer efforts and financial support from
+the end user community. That support comes in the form of donations and paid
+sponsorships, software support contracts, paid consulting services
+and commissioned software development.
+
+Since all these activities support the continued development and improvement
+of OpenSSL we consider all these clients and customers as sponsors of the
+OpenSSL project.
+
+We would like to identify and thank the following such sponsors for their past
+or current significant support of the OpenSSL project:
+
+Major support:
+
+	Qualys		http://www.qualys.com/
+
+Very significant support:
+
+	OpenGear:	http://www.opengear.com/
+
+Significant support:
+
+	PSW Group:	http://www.psw.net/
+	Acano Ltd.	http://acano.com/
+
+Please note that we ask permission to identify sponsors and that some sponsors
+we consider eligible for inclusion here have requested to remain anonymous.
+
+Additional sponsorship or financial support is always welcome: for more
+information please contact the OpenSSL Software Foundation.

CHANGES.SSLeay

@@ -0,0 +1,968 @@
+This file contains the changes for the SSLeay library up to version
+0.9.0b. For later changes, see the file "CHANGES".
+
+  SSLeay CHANGES
+  ______________
+
+Changes between 0.8.x and 0.9.0b
+
+10-Apr-1998
+
+I said the next version would go out at easter, and so it shall.
+I expect a 0.9.1 will follow with portability fixes in the next few weeks.
+
+This is a quick, meet the deadline.  Look to ssl-users for comments on what
+is new etc.
+
+eric (about to go bushwalking for the 4 day easter break :-)
+
+16-Mar-98
+    - Patch for Cray T90 from Wayne Schroeder <schroede@SDSC.EDU>
+    - Lots and lots of changes
+
+29-Jan-98
+    - ASN1_BIT_STRING_set_bit()/ASN1_BIT_STRING_get_bit() from
+      Goetz Babin-Ebell <babinebell@trustcenter.de>.
+    - SSL_version() now returns SSL2_VERSION, SSL3_VERSION or
+      TLS1_VERSION.
+
+7-Jan-98
+    - Finally reworked the cipher string to ciphers again, so it
+      works correctly
+    - All the app_data stuff is now ex_data with funcion calls to access.
+      The index is supplied by a function and 'methods' can be setup
+      for the types that are called on XXX_new/XXX_free.  This lets
+      applications get notified on creation and destruction.  Some of
+      the RSA methods could be implemented this way and I may do so.
+    - Oh yes, SSL under perl5 is working at the basic level.
+
+15-Dec-97
+    - Warning - the gethostbyname cache is not fully thread safe,
+      but it should work well enough.
+    - Major internal reworking of the app_data stuff.  More functions
+      but if you were accessing ->app_data directly, things will
+      stop working.
+    - The perlv5 stuff is working.  Currently on message digests,
+      ciphers and the bignum library.
+
+9-Dec-97
+    - Modified re-negotiation so that server initated re-neg
+      will cause a SSL_read() to return -1 should retry.
+      The danger otherwise was that the server and the
+      client could end up both trying to read when using non-blocking
+      sockets.
+
+4-Dec-97
+    - Lots of small changes
+    - Fix for binaray mode in Windows for the FILE BIO, thanks to
+      Bob Denny <rdenny@dc3.com>
+
+17-Nov-97
+    - Quite a few internal cleanups, (removal of errno, and using macros
+      defined in e_os.h).
+    - A bug in ca.c, pointed out by yasuyuki-ito@d-cruise.co.jp, where
+      the automactic naming out output files was being stuffed up.
+
+29-Oct-97
+    - The Cast5 cipher has been added.  MD5 and SHA-1 are now in assember
+      for x86.
+
+21-Oct-97
+    - Fixed a bug in the BIO_gethostbyname() cache.
+
+15-Oct-97
+    - cbc mode for blowfish/des/3des is now in assember.  Blowfish asm
+      has also been improved.  At this point in time, on the pentium,
+      md5 is %80 faster, the unoptimesed sha-1 is %79 faster,
+      des-cbc is %28 faster, des-ede3-cbc is %9 faster and blowfish-cbc
+      is %62 faster.
+
+12-Oct-97
+    - MEM_BUF_grow() has been fixed so that it always sets the buf->length
+      to the value we are 'growing' to.  Think of MEM_BUF_grow() as the
+      way to set the length value correctly.
+
+10-Oct-97
+    - I now hash for certificate lookup on the raw DER encoded RDN (md5).
+      This breaks things again :-(.  This is efficent since I cache
+      the DER encoding of the RDN.
+    - The text DN now puts in the numeric OID instead of UNKNOWN.
+    - req can now process arbitary OIDs in the config file.
+    - I've been implementing md5 in x86 asm, much faster :-).
+    - Started sha1 in x86 asm, needs more work.
+    - Quite a few speedups in the BN stuff.  RSA public operation
+      has been made faster by caching the BN_MONT_CTX structure.
+      The calulating of the Ai where A*Ai === 1 mod m was rather
+      expensive.  Basically a 40-50% speedup on public operations.
+      The RSA speedup is now 15% on pentiums and %20 on pentium
+      pro.
+
+30-Sep-97
+    - After doing some profiling, I added x86 adm for bn_add_words(),
+      which just adds 2 arrays of longs together.  A %10 speedup
+      for 512 and 1024 bit RSA on the pentium pro.
+
+29-Sep-97
+    - Converted the x86 bignum assembler to us the perl scripts
+      for generation.
+
+23-Sep-97
+    - If SSL_set_session() is passed a NULL session, it now clears the
+      current session-id.
+
+22-Sep-97
+    - Added a '-ss_cert file' to apps/ca.c.  This will sign selfsigned
+      certificates.
+    - Bug in crypto/evp/encode.c where by decoding of 65 base64
+      encoded lines, one line at a time (via a memory BIO) would report
+      EOF after the first line was decoded.
+    - Fix in X509_find_by_issuer_and_serial() from
+      Dr Stephen Henson <shenson@bigfoot.com>
+
+19-Sep-97
+    - NO_FP_API and NO_STDIO added.
+    - Put in sh config command.  It auto runs Configure with the correct
+      parameters.
+
+18-Sep-97
+    - Fix x509.c so if a DSA cert has different parameters to its parent,
+      they are left in place.  Not tested yet.
+
+16-Sep-97
+    - ssl_create_cipher_list() had some bugs, fixes from
+      Patrick Eisenacher <eisenach@stud.uni-frankfurt.de>
+    - Fixed a bug in the Base64 BIO, where it would return 1 instead
+      of -1 when end of input was encountered but should retry.
+      Basically a Base64/Memory BIO interaction problem.
+    - Added a HMAC set of functions in preporarion for TLS work.
+
+15-Sep-97
+    - Top level makefile tweak - Cameron Simpson <cs@zip.com.au>
+    - Prime generation spead up %25 (512 bit prime, pentium pro linux)
+      by using montgomery multiplication in the prime number test.
+
+11-Sep-97
+    - Ugly bug in ssl3_write_bytes().  Basically if application land
+      does a SSL_write(ssl,buf,len) where len > 16k, the SSLv3 write code
+      did not check the size and tried to copy the entire buffer.
+      This would tend to cause memory overwrites since SSLv3 has
+      a maximum packet size of 16k.  If your program uses
+      buffers <= 16k, you would probably never see this problem.
+    - Fixed a few errors that were cause by malloc() not returning
+      0 initialised memory..
+    - SSL_OP_NETSCAPE_CA_DN_BUG was being switched on when using
+      SSL_CTX_set_options(ssl_ctx,SSL_OP_ALL); which was a bad thing
+      since this flags stops SSLeay being able to handle client
+      cert requests correctly.
+
+08-Sep-97
+    - SSL_SESS_CACHE_NO_INTERNAL_LOOKUP option added.  When switched
+      on, the SSL server routines will not use a SSL_SESSION that is
+      held in it's cache.  This in intended to be used with the session-id
+      callbacks so that while the session-ids are still stored in the
+      cache, the decision to use them and how to look them up can be
+      done by the callbacks.  The are the 'new', 'get' and 'remove'
+      callbacks.  This can be used to determine the session-id
+      to use depending on information like which port/host the connection
+      is coming from.  Since the are also SSL_SESSION_set_app_data() and
+      SSL_SESSION_get_app_data() functions, the application can hold
+      information against the session-id as well.
+
+03-Sep-97
+    - Added lookup of CRLs to the by_dir method,
+      X509_load_crl_file() also added.  Basically it means you can
+      lookup CRLs via the same system used to lookup certificates.
+    - Changed things so that the X509_NAME structure can contain
+      ASN.1 BIT_STRINGS which is required for the unique
+      identifier OID.
+    - Fixed some problems with the auto flushing of the session-id
+      cache.  It was not occuring on the server side.
+
+02-Sep-97
+    - Added SSL_CTX_sess_cache_size(SSL_CTX *ctx,unsigned long size)
+      which is the maximum number of entries allowed in the
+      session-id cache.  This is enforced with a simple FIFO list.
+      The default size is 20*1024 entries which is rather large :-).
+      The Timeout code is still always operating.
+
+01-Sep-97
+    - Added an argument to all the 'generate private key/prime`
+      callbacks.  It is the last parameter so this should not
+      break existing code but it is needed for C++.
+    - Added the BIO_FLAGS_BASE64_NO_NL flag for the BIO_f_base64()
+      BIO.  This lets the BIO read and write base64 encoded data
+      without inserting or looking for '\n' characters.  The '-A'
+      flag turns this on when using apps/enc.c.
+    - RSA_NO_PADDING added to help BSAFE functionality.  This is a
+      very dangerous thing to use, since RSA private key
+      operations without random padding bytes (as PKCS#1 adds) can
+      be attacked such that the private key can be revealed.
+    - ASN.1 bug and rc2-40-cbc and rc4-40 added by
+      Dr Stephen Henson <shenson@bigfoot.com>
+
+31-Aug-97 (stuff added while I was away)    
+    - Linux pthreads by Tim Hudson (tjh@cryptsoft.com).
+    - RSA_flags() added allowing bypass of pub/priv match check
+      in ssl/ssl_rsa.c - Tim Hudson.
+    - A few minor bugs.
+
+SSLeay 0.8.1 released.
+
+19-Jul-97
+    - Server side initated dynamic renegotiation is broken.  I will fix
+      it when I get back from holidays.
+
+15-Jul-97
+    - Quite a few small changes.
+    - INVALID_SOCKET usage cleanups from Alex Kiernan <alex@hisoft.co.uk>
+
+09-Jul-97
+    - Added 2 new values to the SSL info callback.
+      SSL_CB_START which is passed when the SSL protocol is started
+      and SSL_CB_DONE when it has finished sucsessfully.
+
+08-Jul-97
+    - Fixed a few bugs problems in apps/req.c and crypto/asn1/x_pkey.c
+      that related to DSA public/private keys.
+    - Added all the relevent PEM and normal IO functions to support
+      reading and writing RSAPublic keys.
+    - Changed makefiles to use ${AR} instead of 'ar r'
+
+07-Jul-97
+    - Error in ERR_remove_state() that would leave a dangling reference
+      to a free()ed location - thanks to Alex Kiernan <alex@hisoft.co.uk>
+    - s_client now prints the X509_NAMEs passed from the server
+      when requesting a client cert.
+    - Added a ssl->type, which is one of SSL_ST_CONNECT or
+      SSL_ST_ACCEPT.  I had to add it so I could tell if I was
+      a connect or an accept after the handshake had finished.
+    - SSL_get_client_CA_list(SSL *s) now returns the CA names
+      passed by the server if called by a client side SSL.
+
+05-Jul-97
+    - Bug in X509_NAME_get_text_by_OBJ(), looking starting at index
+      0, not -1 :-(  Fix from Tim Hudson (tjh@cryptsoft.com).
+
+04-Jul-97
+    - Fixed some things in X509_NAME_add_entry(), thanks to
+      Matthew Donald <matthew@world.net>.
+    - I had a look at the cipher section and though that it was a
+      bit confused, so I've changed it.
+    - I was not setting up the RC4-64-MD5 cipher correctly.  It is
+      a MS special that appears in exported MS Money.
+    - Error in all my DH ciphers.  Section 7.6.7.3 of the SSLv3
+      spec.  I was missing the two byte length header for the
+      ClientDiffieHellmanPublic value.  This is a packet sent from
+      the client to the server.  The SSL_OP_SSLEAY_080_CLIENT_DH_BUG
+      option will enable SSLeay server side SSLv3 accept either
+      the correct or my 080 packet format.
+    - Fixed a few typos in crypto/pem.org.
+
+02-Jul-97
+    - Alias mapping for EVP_get_(digest|cipher)byname is now
+      performed before a lookup for actual cipher.  This means
+      that an alias can be used to 're-direct' a cipher or a
+      digest.
+    - ASN1_read_bio() had a bug that only showed up when using a
+      memory BIO.  When EOF is reached in the memory BIO, it is
+      reported as a -1 with BIO_should_retry() set to true.
+
+01-Jul-97
+    - Fixed an error in X509_verify_cert() caused by my
+      miss-understanding how 'do { contine } while(0);' works.
+      Thanks to Emil Sit <sit@mit.edu> for educating me :-)
+
+30-Jun-97
+    - Base64 decoding error.  If the last data line did not end with
+      a '=', sometimes extra data would be returned.
+    - Another 'cut and paste' bug in x509.c related to setting up the
+      STDout BIO.
+
+27-Jun-97
+    - apps/ciphers.c was not printing due to an editing error.
+    - Alex Kiernan <alex@hisoft.co.uk> send in a nice fix for
+      a library build error in util/mk1mf.pl
+
+26-Jun-97
+    - Still did not have the auto 'experimental' code removal
+      script correct.
+    - A few header tweaks for Watcom 11.0 under Win32 from
+      Rolf Lindemann <Lindemann@maz-hh.de>
+    - 0 length OCTET_STRING bug in asn1_parse
+    - A minor fix with an non-existent function in the MS .def files.
+    - A few changes to the PKCS7 stuff.
+
+25-Jun-97
+    SSLeay 0.8.0 finally it gets released.
+
+24-Jun-97
+    Added a SSL_OP_EPHEMERAL_RSA option which causes all SSLv3 RSA keys to
+    use a temporary RSA key.  This is experimental and needs some more work.
+    Fixed a few Win16 build problems.
+
+23-Jun-97
+    SSLv3 bug. I was not doing the 'lookup' of the CERT structure
+    correctly. I was taking the SSL->ctx->default_cert when I should
+    have been using SSL->cert. The bug was in ssl/s3_srvr.c
+
+20-Jun-97
+    X509_ATTRIBUTES were being encoded wrongly by apps/reg.c and the
+    rest of the library. Even though I had the code required to do
+    it correctly, apps/req.c was doing the wrong thing.  I have fixed
+    and tested everything.
+
+    Missing a few #ifdef FIONBIO sections in crypto/bio/bss_acpt.c.
+
+19-Jun-97
+    Fixed a bug in the SSLv2 server side first packet handling. When
+    using the non-blocking test BIO, the ssl->s2->first_packet flag
+    was being reset when a would-block failure occurred when reading
+    the first 5 bytes of the first packet. This caused the checking
+    logic to run at the wrong time and cause an error.
+
+    Fixed a problem with specifying cipher. If RC4-MD5 were used,
+    only the SSLv3 version would be picked up.  Now this will pick
+    up both SSLv2 and SSLv3 versions. This required changing the
+    SSL_CIPHER->mask values so that they only mask the ciphers,
+    digests, authentication, export type and key-exchange algorithms.
+
+    I found that when a SSLv23 session is established, a reused
+    session, of type SSLv3 was attempting to write the SSLv2 
+    ciphers, which were invalid. The SSL_METHOD->put_cipher_by_char 
+    method has been modified so it will only write out cipher which
+    that method knows about.  
+
+
+ Changes between 0.8.0 and 0.8.1
+
+  *) Mostly bug fixes. 
+     There is an Ephemeral DH cipher problem which is fixed.
+
+ SSLeay 0.8.0
+
+This version of SSLeay has quite a lot of things different from the
+previous version.
+
+Basically check all callback parameters, I will be producing documentation
+about how to use things in th future.  Currently I'm just getting 080 out
+the door.  Please not that there are several ways to do everything, and
+most of the applications in the apps directory are hybrids, some using old
+methods and some using new methods.
+
+Have a look in demos/bio for some very simple programs and
+apps/s_client.c and apps/s_server.c for some more advanced versions.
+Notes are definitly needed but they are a week or so away.
+
+Anyway, some quick nots from Tim Hudson (tjh@cryptsoft.com)
+---
+Quick porting notes for moving from SSLeay-0.6.x to SSLeay-0.8.x to
+get those people that want to move to using the new code base off to
+a quick start.
+
+Note that Eric has tidied up a lot of the areas of the API that were
+less than desirable and renamed quite a few things (as he had to break
+the API in lots of places anyrate). There are a whole pile of additional
+functions for making dealing with (and creating) certificates a lot
+cleaner.
+
+01-Jul-97
+Tim Hudson
+tjh@cryptsoft.com
+
+---8<---
+
+To maintain code that uses both SSLeay-0.6.x and SSLeay-0.8.x you could
+use something like the following (assuming you #include "crypto.h" which
+is something that you really should be doing).
+
+#if SSLEAY_VERSION_NUMBER >= 0x0800
+#define SSLEAY8
+#endif
+
+buffer.h -> splits into buffer.h and bio.h so you need to include bio.h
+            too if you are working with BIO internal stuff (as distinct
+        from simply using the interface in an opaque manner)
+
+#include "bio.h"    - required along with "buffer.h" if you write
+              your own BIO routines as the buffer and bio
+              stuff that was intermixed has been separated
+              out 
+            
+envelope.h -> evp.h  (which should have been done ages ago)
+
+Initialisation ... don't forget these or you end up with code that
+is missing the bits required to do useful things (like ciphers):
+
+SSLeay_add_ssl_algorithms()
+(probably also want SSL_load_error_strings() too but you should have
+ already had that call in place)
+
+SSL_CTX_new()   - requires an extra method parameter
+              SSL_CTX_new(SSLv23_method()) 
+              SSL_CTX_new(SSLv2_method()) 
+              SSL_CTX_new(SSLv3_method()) 
+
+          OR to only have the server or the client code
+              SSL_CTX_new(SSLv23_server_method()) 
+              SSL_CTX_new(SSLv2_server_method()) 
+              SSL_CTX_new(SSLv3_server_method()) 
+          or  
+              SSL_CTX_new(SSLv23_client_method()) 
+              SSL_CTX_new(SSLv2_client_method()) 
+              SSL_CTX_new(SSLv3_client_method()) 
+
+SSL_set_default_verify_paths() ... renamed to the more appropriate
+SSL_CTX_set_default_verify_paths()
+
+If you want to use client certificates then you have to add in a bit
+of extra stuff in that a SSLv3 server sends a list of those CAs that
+it will accept certificates from ... so you have to provide a list to
+SSLeay otherwise certain browsers will not send client certs.
+
+SSL_CTX_set_client_CA_list(ctx,SSL_load_client_CA_file(s_cert_file));
+
+
+X509_NAME_oneline(X)    -> X509_NAME_oneline(X,NULL,0)  
+               or provide a buffer and size to copy the
+               result into
+
+X509_add_cert ->  X509_STORE_add_cert (and you might want to read the
+          notes on X509_NAME structure changes too)
+
+
+VERIFICATION CODE
+=================
+
+The codes have all be renamed from VERIFY_ERR_* to X509_V_ERR_* to
+more accurately reflect things.
+
+The verification callback args are now packaged differently so that
+extra fields for verification can be added easily in future without
+having to break things by adding extra parameters each release :-)
+
+X509_cert_verify_error_string -> X509_verify_cert_error_string
+
+
+BIO INTERNALS
+=============
+
+Eric has fixed things so that extra flags can be introduced in
+the BIO layer in future without having to play with all the BIO
+modules by adding in some macros.
+
+The ugly stuff using 
+    b->flags ~= (BIO_FLAGS_RW|BIO_FLAGS_SHOULD_RETRY)
+becomes
+    BIO_clear_retry_flags(b)
+
+    b->flags |= (BIO_FLAGS_READ|BIO_FLAGS_SHOULD_RETRY)
+becomes
+    BIO_set_retry_read(b)
+
+Also ... BIO_get_retry_flags(b), BIO_set_flags(b)
+
+
+
+OTHER THINGS
+============
+
+X509_NAME has been altered so that it isn't just a STACK ... the STACK
+is now in the "entries" field ... and there are a pile of nice functions
+for getting at the details in a much cleaner manner.
+
+SSL_CTX has been altered ... "cert" is no longer a direct member of this
+structure ... things are now down under "cert_store" (see x509_vfy.h) and
+things are no longer in a CERTIFICATE_CTX but instead in a X509_STORE.
+If your code "knows" about this level of detail then it will need some 
+surgery.
+
+If you depending on the incorrect spelling of a number of the error codes
+then you will have to change your code as these have been fixed.
+
+ENV_CIPHER "type" got renamed to "nid" and as that is what it actually
+has been all along so this makes things clearer.
+ify_cert_error_string(ctx->error));
+
+SSL_R_NO_CIPHER_WE_TRUST -> SSL_R_NO_CIPHER_LIST
+            and SSL_R_REUSE_CIPHER_LIST_NOT_ZERO
+
+
+
+ Changes between 0.7.x and 0.8.0
+  
+  *) There have been lots of changes, mostly the addition of SSLv3.
+     There have been many additions from people and amongst
+     others, C2Net has assisted greatly.
+ 
+ Changes between 0.7.x and 0.7.x
+
+  *) Internal development version only
+
+SSLeay 0.6.6 13-Jan-1997
+
+The main additions are
+
+- assember for x86 DES improvments.
+  From 191,000 per second on a pentium 100, I now get 281,000.  The inner
+  loop and the IP/FP modifications are from
+  Svend Olaf Mikkelsen <svolaf@inet.uni-c.dk>.  Many thanks for his
+  contribution.
+- The 'DES macros' introduced in 0.6.5 now have 3 types.
+  DES_PTR1, DES_PTR2 and 'normal'.  As per before, des_opts reports which
+  is best and there is a summery of mine in crypto/des/options.txt
+- A few bug fixes.
+- Added blowfish.  It is not used by SSL but all the other stuff that
+  deals with ciphers can use it in either ecb, cbc, cfb64 or ofb64 modes.
+  There are 3 options for optimising Blowfish.  BF_PTR, BF_PTR2 and 'normal'.
+  BF_PTR2 is pentium/x86 specific.  The correct option is setup in
+  the 'Configure' script.
+- There is now a 'get client certificate' callback which can be
+  'non-blocking'.  If more details are required, let me know.  It will
+  documented more in SSLv3 when I finish it.
+- Bug fixes from 0.6.5 including the infamous 'ca' bug.  The 'make test'
+  now tests the ca program.
+- Lots of little things modified and tweaked.
+
+ SSLeay 0.6.5
+
+After quite some time (3 months), the new release.  I have been very busy
+for the last few months and so this is mostly bug fixes and improvments.
+
+The main additions are
+
+- assember for x86 DES.  For all those gcc based systems, this is a big
+  improvement.  From 117,000 DES operation a second on a pentium 100,
+  I now get 191,000.  I have also reworked the C version so it
+  now gives 148,000 DESs per second.  
+- As mentioned above, the inner DES macros now have some more variant that
+  sometimes help, sometimes hinder performance.  There are now 3 options
+  DES_PTR (ptr vs array lookup), DES_UNROLL (full vs partial loop unrolling)
+  and DES_RISC (a more register intensive version of the inner macro).
+  The crypto/des/des_opts.c program, when compiled and run, will give
+  an indication of the correct options to use.
+- The BIO stuff has been improved.  Read doc/bio.doc.  There are now
+  modules for encryption and base64 encoding and a BIO_printf() function.
+- The CA program will accept simple one line X509v3 extensions in the
+  ssleay.cnf file.  Have a look at the example.  Currently this just
+  puts the text into the certificate as an OCTET_STRING so currently
+  the more advanced X509v3 data types are not handled but this is enough
+  for the netscape extensions.
+- There is the start of a nicer higher level interface to the X509
+  strucutre.
+- Quite a lot of bug fixes.
+- CRYPTO_malloc_init()  (or CRYPTO_set_mem_functions()) can be used
+  to define the malloc(), free() and realloc() routines to use
+  (look in crypto/crypto.h).  This is mostly needed for Windows NT/95 when
+  using DLLs and mixing CRT libraries.
+
+In general, read the 'VERSION' file for changes and be aware that some of
+the new stuff may not have been tested quite enough yet, so don't just plonk
+in SSLeay 0.6.5 when 0.6.4 used to work and expect nothing to break.
+
+SSLeay 0.6.4 30/08/96 eay
+
+I've just finished some test builds on Windows NT, Windows 3.1, Solaris 2.3,
+Solaris 2.5, Linux, IRIX, HPUX 10 and everthing seems to work :-).
+
+The main changes in this release
+
+- Thread safe.  have a read of doc/threads.doc and play in the mt directory.
+  For anyone using 0.6.3 with threads, I found 2 major errors so consider
+  moving to 0.6.4.  I have a test program that builds under NT and
+  solaris.
+- The get session-id callback has changed.  Have a read of doc/callback.doc.
+- The X509_cert_verify callback (the SSL_verify callback) now
+  has another argument.  Have a read of doc/callback.doc
+- 'ca -preserve', sign without re-ordering the DN.  Not tested much.
+- VMS support.
+- Compile time memory leak detection can now be built into SSLeay.
+  Read doc/memory.doc
+- CONF routines now understand '\', '\n', '\r' etc.  What this means is that
+  the  SPKAC object mentioned in doc/ns-ca.doc can be on multiple lines.
+- 'ssleay ciphers' added, lists the default cipher list for SSLeay.
+- RC2 key setup is now compatable with Netscape.
+- Modifed server side of SSL implementation, big performance difference when
+      using session-id reuse.
+
+0.6.3
+
+Bug fixes and the addition of some nice stuff to the 'ca' program.
+Have a read of doc/ns-ca.doc for how hit has been modified so
+it can be driven from a CGI script.  The CGI script is not provided,
+but that is just being left as an excersize for the reader :-).
+
+0.6.2
+
+This is most bug fixes and functionality improvements.
+
+Additions are
+- More thread debugging patches, the thread stuff is still being
+  tested, but for those keep to play with stuff, have a look in
+  crypto/cryptlib.c.  The application needs to define 1 (or optionaly
+  a second) callback that is used to implement locking.  Compiling
+  with LOCK_DEBUG spits out lots of locking crud :-).
+  This is what I'm currently working on.
+- SSL_CTX_set_default_passwd_cb() can be used to define the callback
+  function used in the SSL*_file() functions used to load keys.  I was
+  always of the opinion that people should call
+  PEM_read_RSAPrivateKey() and pass the callback they want to use, but
+  it appears they just want to use the SSL_*_file() function() :-(.
+- 'enc' now has a -kfile so a key can be read from a file.  This is
+  mostly used so that the passwd does not appear when using 'ps',
+  which appears imposible to stop under solaris.
+- X509v3 certificates now work correctly.  I even have more examples
+  in my tests :-).  There is now a X509_EXTENSION type that is used in
+  X509v3 certificates and CRLv2.
+- Fixed that signature type error :-(
+- Fixed quite a few potential memory leaks and problems when reusing
+  X509, CRL and REQ structures.
+- EVP_set_pw_prompt() now sets the library wide default password
+  prompt.
+- The 'pkcs7' command will now, given the -print_certs flag, output in
+  pem format, all certificates and CRL contained within.  This is more
+  of a pre-emtive thing for the new verisign distribution method.  I
+  should also note, that this also gives and example in code, of how
+  to do this :-), or for that matter, what is involved in going the
+  other way (list of certs and crl -> pkcs7).
+- Added RSA's DESX to the DES library.  It is also available via the
+  EVP_desx_cbc() method and via 'enc desx'. 
+
+SSLeay 0.6.1
+
+The main functional changes since 0.6.0 are as follows
+- Bad news, the Microsoft 060 DLL's are not compatable, but the good news is
+  that from now on, I'll keep the .def numbers the same so they will be.
+- RSA private key operations are about 2 times faster that 0.6.0
+- The SSL_CTX now has more fields so default values can be put against
+  it.  When an SSL structure is created, these default values are used
+  but can be overwritten.  There are defaults for cipher, certificate,
+  private key, verify mode and callback.  This means SSL session
+  creation can now be
+  ssl=SSL_new()
+  SSL_set_fd(ssl,sock);
+  SSL_accept(ssl)
+  ....
+  All the other uglyness with having to keep a global copy of the
+  private key and certificate/verify mode in the server is now gone.
+- ssl/ssltest.c - one process talking SSL to its self for testing.
+- Storage of Session-id's can be controled via a session_cache_mode
+  flag.  There is also now an automatic default flushing of 
+  old session-id's.
+- The X509_cert_verify() function now has another parameter, this
+  should not effect most people but it now means that the reason for
+  the failure to verify is now available via SSL_get_verify_result(ssl).
+  You don't have to use a global variable.
+- SSL_get_app_data() and SSL_set_app_data() can be used to keep some
+  application data against the SSL structure.  It is upto the application
+  to free the data.  I don't use it, but it is available.
+- SSL_CTX_set_cert_verify_callback() can be used to specify a
+  verify callback function that completly replaces my certificate
+  verification code.  Xcert should be able to use this :-).
+  The callback is of the form int app_verify_callback(arg,ssl,cert).
+  This needs to be documented more.
+- I have started playing with shared library builds, have a look in
+  the shlib directory.  It is very simple.  If you need a numbered
+  list of functions, have a look at misc/crypto.num and misc/ssl.num.
+- There is some stuff to do locking to make the library thread safe.
+  I have only started this stuff and have not finished.  If anyone is
+  keen to do so, please send me the patches when finished.
+
+So I have finally made most of the additions to the SSL interface that
+I thought were needed.
+
+There will probably be a pause before I make any non-bug/documentation
+related changes to SSLeay since I'm feeling like a bit of a break.
+
+eric - 12 Jul 1996
+I saw recently a comment by some-one that we now seem to be entering
+the age of perpetual Beta software.
+Pioneered by packages like linux but refined to an art form by
+netscape.
+
+I too wish to join this trend with the anouncement of SSLeay 0.6.0 :-).
+
+There are quite a large number of sections that are 'works in
+progress' in this package.  I will also list the major changes and
+what files you should read.
+
+BIO - this is the new IO structure being used everywhere in SSLeay.  I
+started out developing this because of microsoft, I wanted a mechanism
+to callback to the application for all IO, so Windows 3.1 DLL
+perversion could be hidden from me and the 15 different ways to write
+to a file under NT would also not be dictated by me at library build
+time.  What the 'package' is is an API for a data structure containing
+functions.  IO interfaces can be written to conform to the
+specification.  This in not intended to hide the underlying data type
+from the application, but to hide it from SSLeay :-).
+I have only really finished testing the FILE * and socket/fd modules.
+There are also 'filter' BIO's.  Currently I have only implemented
+message digests, and it is in use in the dgst application.  This
+functionality will allow base64/encrypto/buffering modules to be
+'push' into a BIO without it affecting the semantics.  I'm also
+working on an SSL BIO which will hide the SSL_accept()/SLL_connet()
+from an event loop which uses the interface.
+It is also possible to 'attach' callbacks to a BIO so they get called
+before and after each operation, alowing extensive debug output
+to be generated (try running dgst with -d).
+
+Unfortunaly in the conversion from 0.5.x to 0.6.0, quite a few
+functions that used to take FILE *, now take BIO *.
+The wrappers are easy to write
+
+function_fp(fp,x)
+FILE *fp;
+    {
+    BIO *b;
+    int ret;
+
+    if ((b=BIO_new(BIO_s_file())) == NULL) error.....
+    BIO_set_fp(b,fp,BIO_NOCLOSE);
+    ret=function_bio(b,x);
+    BIO_free(b);
+    return(ret);
+    }
+Remember, there are no functions that take FILE * in SSLeay when
+compiled for Windows 3.1 DLL's.
+
+--
+I have added a general EVP_PKEY type that can hold a public/private
+key.  This is now what is used by the EVP_ functions and is passed
+around internally.  I still have not done the PKCS#8 stuff, but
+X509_PKEY is defined and waiting :-)
+
+--
+For a full function name listings, have a look at ms/crypt32.def and
+ms/ssl32.def.  These are auto-generated but are complete.
+Things like ASN1_INTEGER_get() have been added and are in here if you
+look.  I have renamed a few things, again, have a look through the
+function list and you will probably find what you are after.  I intend
+to at least put a one line descrition for each one.....
+
+--
+Microsoft - thats what this release is about, read the MICROSOFT file.
+
+--
+Multi-threading support.  I have started hunting through the code and
+flaging where things need to be done.  In a state of work but high on
+the list.
+
+--
+For random numbers, edit e_os.h and set DEVRANDOM (it's near the top)
+be be you random data device, otherwise 'RFILE' in e_os.h
+will be used, in your home directory.  It will be updated
+periodically.  The environment variable RANDFILE will override this
+choice and read/write to that file instead.  DEVRANDOM is used in
+conjunction to the RFILE/RANDFILE.  If you wish to 'seed' the random
+number generator, pick on one of these files.
+
+--
+
+The list of things to read and do
+
+dgst -d
+s_client -state (this uses a callback placed in the SSL state loop and
+        will be used else-where to help debug/monitor what
+        is happening.)
+
+doc/why.doc
+doc/bio.doc <- hmmm, needs lots of work.
+doc/bss_file.doc <- one that is working :-)
+doc/session.doc <- it has changed
+doc/speed.doc
+ also play with ssleay version -a.  I have now added a SSLeay()
+ function that returns a version number, eg 0600 for this release
+ which is primarily to be used to check DLL version against the
+ application.
+util/*  Quite a few will not interest people, but some may, like
+ mk1mf.pl, mkdef.pl,
+util/do_ms.sh
+
+try
+cc -Iinclude -Icrypto -c crypto/crypto.c
+cc -Iinclude -Issl -c ssl/ssl.c
+You have just built the SSLeay libraries as 2 object files :-)
+
+Have a general rummage around in the bin stall directory and look at
+what is in there, like CA.sh and c_rehash
+
+There are lots more things but it is 12:30am on a Friday night and I'm
+heading home :-).
+
+eric 22-Jun-1996
+This version has quite a few major bug fixes and improvements.  It DOES NOT
+do SSLv3 yet.
+
+The main things changed
+- A Few days ago I added the s_mult application to ssleay which is
+  a demo of an SSL server running in an event loop type thing.
+  It supports non-blocking IO, I have finally gotten it right, SSL_accept()
+  can operate in non-blocking IO mode, look at the code to see how :-).
+  Have a read of doc/s_mult as well.  This program leaks memory and
+  file descriptors everywhere but I have not cleaned it up yet.
+  This is a demo of how to do non-blocking IO.
+- The SSL session management has been 'worked over' and there is now
+  quite an expansive set of functions to manipulate them.  Have a read of
+  doc/session.doc for some-things I quickly whipped up about how it now works.
+  This assume you know the SSLv2 protocol :-)
+- I can now read/write the netscape certificate format, use the
+  -inform/-outform  'net' options to the x509 command.  I have not put support
+  for this type in the other demo programs, but it would be easy to add.
+- asn1parse and 'enc' have been modified so that when reading base64
+  encoded files (pem format), they do not require '-----BEGIN' header lines.
+  The 'enc' program had a buffering bug fixed, it can be used as a general
+  base64 -> binary -> base64 filter by doing 'enc -a -e' and 'enc -a -d'
+  respecivly.  Leaving out the '-a' flag in this case makes the 'enc' command
+  into a form of 'cat'.
+- The 'x509' and 'req' programs have been fixed and modified a little so
+  that they generate self-signed certificates correctly.  The test
+  script actually generates a 'CA' certificate and then 'signs' a
+  'user' certificate.  Have a look at this shell script (test/sstest)
+  to see how things work, it tests most possible combinations of what can
+  be done.
+- The 'SSL_set_pref_cipher()' function has been 'fixed' and the prefered name
+  of SSL_set_cipher_list() is now the correct API (stops confusion :-).
+  If this function is used in the client, only the specified ciphers can
+  be used, with preference given to the order the ciphers were listed.
+  For the server, if this is used, only the specified ciphers will be used
+  to accept connections.  If this 'option' is not used, a default set of
+  ciphers will be used.  The SSL_CTX_set_cipher_list(SSL_CTX *ctx) sets this
+  list for all ciphers started against the SSL_CTX.  So the order is
+  SSL cipher_list, if not present, SSL_CTX cipher list, if not
+  present, then the library default.
+  What this means is that normally ciphers like
+  NULL-MD5 will never be used.  The only way this cipher can be used
+  for both ends to specify to use it.
+  To enable or disable ciphers in the library at build time, modify the
+  first field for the cipher in the ssl_ciphers array in ssl/ssl_lib.c.
+  This file also contains the 'pref_cipher' list which is the default
+  cipher preference order.
+- I'm not currently sure if the 'rsa -inform net' and the 'rsa -outform net'
+  options work.  They should, and they enable loading and writing the
+  netscape rsa private key format.  I will be re-working this section of
+  SSLeay for the next version.  What is currently in place is a quick and
+  dirty hack.
+- I've re-written parts of the bignum library.  This gives speedups
+  for all platforms.  I now provide assembler for use under Windows NT.
+  I have not tested the Windows 3.1 assembler but it is quite simple code.
+  This gives RSAprivate_key operation encryption times of 0.047s (512bit key)
+  and 0.230s (1024bit key) on a pentium 100 which I consider reasonable.
+  Basically the times available under linux/solaris x86 can be achieve under
+  Windows NT.  I still don't know how these times compare to RSA's BSAFE
+  library but I have been emailing with people and with their help, I should
+  be able to get my library's quite a bit faster still (more algorithm changes).
+  The object file crypto/bn/asm/x86-32.obj should be used when linking
+  under NT.
+- 'make makefile.one' in the top directory will generate a single makefile
+  called 'makefile.one'  This makefile contains no perl references and
+  will build the SSLeay library into the 'tmp' and 'out' directories.
+  util/mk1mf.pl >makefile.one is how this makefile is
+  generated.  The mk1mf.pl command take several option to generate the
+  makefile for use with cc, gcc, Visual C++ and Borland C++.  This is
+  still under development.  I have only build .lib's for NT and MSDOS
+  I will be working on this more.  I still need to play with the
+  correct compiler setups for these compilers and add some more stuff but
+  basically if you just want to compile the library
+  on a 'non-unix' platform, this is a very very good file to start with :-).
+  Have a look in the 'microsoft' directory for my current makefiles.
+  I have not yet modified things to link with sockets under Windows NT.
+  You guys should be able to do this since this is actually outside of the
+  SSLeay scope :-).  I will be doing it for myself soon.
+  util/mk1mf.pl takes quite a few options including no-rc, rsaref  and no-sock
+  to build without RC2/RC4, to require RSAref for linking, and to
+  build with no socket code.
+
+- Oh yes, the cipher that was reported to be compatible with RSA's RC2 cipher
+  that was posted to sci.crypt has been added to the library and SSL.
+  I take the view that if RC2 is going to be included in a standard,
+  I'll include the cipher to make my package complete.
+  There are NO_RC2, NO_RC4 and NO_IDEA macros to remove these ciphers
+  at compile time.  I have not tested this recently but it should all work
+  and if you are in the USA and don't want RSA threatening to sue you,
+  you could probably remove the RC4/RC2 code inside these sections.
+  I may in the future include a perl script that does this code
+  removal automatically for those in the USA :-).
+- I have removed all references to sed in the makefiles.  So basically,
+  the development environment requires perl and sh.  The build environment
+  does not (use the makefile.one makefile).
+  The Configure script still requires perl, this will probably stay that way
+  since I have perl for Windows NT :-).
+
+eric (03-May-1996)
+
+PS Have a look in the VERSION file for more details on the changes and
+   bug fixes.
+I have fixed a few bugs, added alpha and x86 assembler and generally cleaned
+things up.  This version will be quite stable, mostly because I'm on
+holidays until 10-March-1996.  For any problems in the interum, send email
+to Tim Hudson <tjh@mincom.oz.au>.
+
+SSLeay 0.5.0
+
+12-12-95
+This is going out before it should really be released.
+
+I leave for 11 weeks holidays on the 22-12-95 and so I either sit on
+this for 11 weeks or get things out.  It is still going to change a
+lot in the next week so if you do grab this version, please test and
+give me feed back ASAP, inculuding questions on how to do things with
+the library.  This will prompt me to write documentation so I don't
+have to answer the same question again :-).
+
+This 'pre' release version is for people who are interested in the
+library.  The applications will have to be changed to use
+the new version of the SSL interface.  I intend to finish more
+documentation before I leave but until then, look at the programs in
+the apps directory.  As far as code goes, it is much much nicer than
+the old version.
+
+The current library works, has no memory leaks (as far as I can tell)
+and is far more bug free that 0.4.5d.  There are no global variable of
+consequence (I believe) and I will produce some documentation that
+tell where to look for those people that do want to do multi-threaded
+stuff.
+
+There should be more documentation.  Have a look in the
+doc directory.  I'll be adding more before I leave, it is a start
+by mostly documents the crypto library.  Tim Hudson will update
+the web page ASAP.  The spelling and grammar are crap but
+it is better than nothing :-)
+
+Reasons to start playing with version 0.5.0
+- All the programs in the apps directory build into one ssleay binary.
+- There is a new version of the 'req' program that generates certificate
+  requests, there is even documentation for this one :-)
+- There is a demo certification authorithy program.  Currently it will
+  look at the simple database and update it.  It will generate CRL from
+  the data base.  You need to edit the database by hand to revoke a
+  certificate, it is my aim to use perl5/Tk but I don't have time to do
+  this right now.  It will generate the certificates but the management
+  scripts still need to be written.  This is not a hard task.
+- Things have been cleaned up alot.
+- Have a look at the enc and dgst programs in the apps directory.
+- It supports v3 of x509 certiticates.
+
+
+Major things missing.
+- I have been working on (and thinging about) the distributed x509
+  hierachy problem.  I have not had time to put my solution in place.
+  It will have to wait until I come back.
+- I have not put in CRL checking in the certificate verification but
+  it would not be hard to do.  I was waiting until I could generate my
+  own CRL (which has only been in the last week) and I don't have time
+  to put it in correctly.
+- Montgomery multiplication need to be implemented.  I know the
+  algorithm, just ran out of time.
+- PKCS#7.  I can load and write the DER version.  I need to re-work
+  things to support BER (if that means nothing, read the ASN1 spec :-).
+- Testing of the higher level digital envelope routines.  I have not
+  played with the *_seal() and *_open() type functions.  They are
+  written but need testing.  The *_sign() and *_verify() functions are
+  rock solid. 
+- PEM.  Doing this and PKCS#7 have been dependant on the distributed
+  x509 heirachy problem.  I started implementing my ideas, got
+  distracted writing a CA program and then ran out of time.  I provide
+  the functionality of RSAref at least.
+- Re work the asm. code for the x86.  I've changed by low level bignum
+  interface again, so I really need to tweak the x86 stuff.  gcc is
+  good enough for the other boxes.
+

CONTRIBUTING

@@ -1,42 +0,0 @@
-HOW TO CONTRIBUTE TO OpenSSL
-----------------------------
-
-Development is coordinated on the openssl-dev mailing list (see
-http://www.openssl.org for information on subscribing). If you
-would like to submit a patch, send it to rt@openssl.org with
-the string "[PATCH]" in the subject. Please be sure to include a
-textual explanation of what your patch does.
-
-You can also make GitHub pull requests. If you do this, please also send
-mail to rt@openssl.org with a brief description and a link to the PR so
-that we can more easily keep track of it.
-
-If you are unsure as to whether a feature will be useful for the general
-OpenSSL community please discuss it on the openssl-dev mailing list first.
-Someone may be already working on the same thing or there may be a good
-reason as to why that feature isn't implemented.
-
-Patches should be as up to date as possible, preferably relative to the
-current Git or the last snapshot. They should follow our coding style
-(see https://www.openssl.org/policies/codingstyle.html) and compile without
-warnings using the --strict-warnings flag.  OpenSSL compiles on many varied
-platforms: try to ensure you only use portable features.
-
-When at all possible, patches should include tests. These can either be
-added to an existing test, or completely new.  Please see test/README for
-information on the test framework.
-
-Our preferred format for patch files is "git format-patch" output. For example
-to provide a patch file containing the last commit in your local git repository
-use the following command:
-
-# git format-patch --stdout HEAD^ >mydiffs.patch
-
-Another method of creating an acceptable patch file without using git is as
-follows:
-
-# cd openssl-work
-# [your changes]
-# ./Configure dist; make clean
-# cd ..
-# diff -ur openssl-orig openssl-work > mydiffs.patch

Configurations/00-base-templates.conf

@@ -1,200 +0,0 @@
-# -*- Mode: perl -*-
-%targets=(
-    BASE => {
-	template	=> 1,
-
-	cflags		=> "",
-	defines		=> [],
-	debug_cflags	=> "",
-	debug_defines	=> [],
-	release_cflags	=> "",
-	release_defines => [],
-	thread_cflags	=> "",
-	thread_defines	=> [],
-
-	apps_extra_src	=> "",
-	cpuid_asm_src	=> "mem_clr.c",
-	bn_asm_src	=> "bn_asm.c",
-	ec_asm_src	=> "",
-	des_asm_src	=> "des_enc.c fcrypt_b.c",
-	aes_asm_src	=> "aes_core.c aes_cbc.c",
-	bf_asm_src	=> "bf_enc.c",
-	md5_asm_src	=> "",
-	cast_asm_src	=> "c_enc.c",
-	rc4_asm_src	=> "rc4_enc.c rc4_skey.c",
-	rmd160_asm_src	=> "",
-	rc5_asm_src	=> "rc5_enc.c",
-	wp_asm_src	=> "wp_block.c",
-	cmll_asm_src	=> "camellia.c cmll_misc.c cmll_cbc.c",
-	modes_asm_src	=> "",
-	padlock_asm_src	=> "",
-	chacha_asm_src	=> "chacha_enc.c",
-	poly1305_asm_src	=> "",
-
-	unistd		=> "<unistd.h>",
-	shared_target	=> "",
-	shared_cflag	=> "",
-	shared_ldflag	=> "",
-	shared_rcflag	=> "",
-	shared_extension	=> "",
-	build_scheme	=> "unixmake",
-	build_file      => "Makefile",
-    },
-
-    x86_asm => {
-	template	=> 1,
-	cpuid_asm_src	=> "x86cpuid.s",
-	bn_asm_src	=> "bn-586.s co-586.s x86-mont.s x86-gf2m.s",
-	ec_asm_src	=> "ecp_nistz256.c ecp_nistz256-x86.s",
-	des_asm_src	=> "des-586.s crypt586.s",
-	aes_asm_src	=> "aes-586.s vpaes-x86.s aesni-x86.s",
-	bf_asm_src	=> "bf-586.s",
-	md5_asm_src	=> "md5-586.s",
-	cast_asm_src	=> "cast-586.s",
-	sha1_asm_src	=> "sha1-586.s sha256-586.s sha512-586.s",
-	rc4_asm_src	=> "rc4-586.s",
-	rmd160_asm_src	=> "rmd-586.s",
-	rc5_asm_src	=> "rc5-586.s",
-	wp_asm_src	=> "wp_block.c wp-mmx.s",
-	cmll_asm_src	=> "cmll-x86.s",
-	modes_asm_src	=> "ghash-x86.s",
-	padlock_asm_src	=> "e_padlock-x86.s",
-	chacha_asm_src	=> "chacha-x86.s",
-	poly1305_asm_src=> "poly1305-x86.s",
-    },
-    x86_elf_asm => {
-	template	=> 1,
-	inherit_from	=> [ "x86_asm" ],
-	perlasm_scheme	=> "elf"
-    },
-    x86_64_asm => {
-	template	=> 1,
-	cpuid_asm_src   => "x86_64cpuid.s",
-	bn_asm_src      => "asm/x86_64-gcc.c x86_64-mont.s x86_64-mont5.s x86_64-gf2m.s rsaz_exp.c rsaz-x86_64.s rsaz-avx2.s",
-	ec_asm_src      => "ecp_nistz256.c ecp_nistz256-x86_64.s",
-	aes_asm_src     => "aes-x86_64.s vpaes-x86_64.s bsaes-x86_64.s aesni-x86_64.s aesni-sha1-x86_64.s aesni-sha256-x86_64.s aesni-mb-x86_64.s",
-	md5_asm_src     => "md5-x86_64.s",
-	sha1_asm_src    => "sha1-x86_64.s sha256-x86_64.s sha512-x86_64.s sha1-mb-x86_64.s sha256-mb-x86_64.s",
-	rc4_asm_src     => "rc4-x86_64.s rc4-md5-x86_64.s",
-	wp_asm_src      => "wp-x86_64.s",
-	cmll_asm_src    => "cmll-x86_64.s cmll_misc.c",
-	modes_asm_src   => "ghash-x86_64.s aesni-gcm-x86_64.s",
-	padlock_asm_src => "e_padlock-x86_64.s",
-	chacha_asm_src	=> "chacha-x86_64.s",
-	poly1305_asm_src=> "poly1305-x86_64.s",
-    },
-    ia64_asm => {
-	template	=> 1,
-	cpuid_asm_src   => "ia64cpuid.s",
-	bn_asm_src      => "bn-ia64.s ia64-mont.s",
-	aes_asm_src     => "aes_core.c aes_cbc.c aes-ia64.s",
-	md5_asm_src     => "md5-ia64.s",
-	sha1_asm_src    => "sha1-ia64.s sha256-ia64.s sha512-ia64.s",
-	rc4_asm_src     => "rc4-ia64.s rc4_skey.c",
-	modes_asm_src   => "ghash-ia64.s",
-	perlasm_scheme	=> "void"
-    },
-    sparcv9_asm => {
-	template	=> 1,
-	cpuid_asm_src   => "sparcv9cap.c sparccpuid.S",
-	bn_asm_src      => "asm/sparcv8plus.S sparcv9-mont.s sparcv9a-mont.s vis3-mont.s sparct4-mont.S sparcv9-gf2m.S",
-	ec_asm_src      => "ecp_nistz256.c ecp_nistz256-sparcv9.S",
-	des_asm_src     => "des_enc-sparc.S fcrypt_b.c dest4-sparcv9.s",
-	aes_asm_src     => "aes_core.c aes_cbc.c aes-sparcv9.s aest4-sparcv9.s",
-	md5_asm_src     => "md5-sparcv9.S",
-	sha1_asm_src    => "sha1-sparcv9.S sha256-sparcv9.S sha512-sparcv9.S",
-	cmll_asm_src    => "camellia.c cmll_misc.c cmll_cbc.c cmllt4-sparcv9.s",
-	modes_asm_src   => "ghash-sparcv9.s",
-	poly1305_asm_src=> "poly1305-sparcv9.S",
-	perlasm_scheme	=> "void"
-    },
-    sparcv8_asm => {
-	template	=> 1,
-	cpuid_asm_src   => "",
-	bn_asm_src      => "asm/sparcv8.S",
-	des_asm_src     => "des_enc-sparc.S fcrypt_b.c",
-	perlasm_scheme	=> "void"
-    },
-    alpha_asm => {
-	template	=> 1,
-	cpuid_asm_src   => "alphacpuid.s",
-	bn_asm_src      => "bn_asm.c alpha-mont.s",
-	sha1_asm_src    => "sha1-alpha.s",
-	modes_asm_src   => "ghash-alpha.s",
-	perlasm_scheme	=> "void"
-    },
-    mips32_asm => {
-	template	=> 1,
-	bn_asm_src      => "bn-mips.s mips-mont.s",
-	aes_asm_src     => "aes_cbc.c aes-mips.S",
-	sha1_asm_src    => "sha1-mips.S sha256-mips.S",
-    },
-    mips64_asm => {
-	inherit_from	=> [ "mips32_asm" ],
-	template	=> 1,
-	sha1_asm_src    => add("sha512-mips.S")
-    },
-    s390x_asm => {
-	template	=> 1,
-	cpuid_asm_src   => "s390xcap.c s390xcpuid.s",
-	bn_asm_src      => "asm/s390x.S s390x-mont.S s390x-gf2m.s",
-	aes_asm_src     => "aes-s390x.S aes-ctr.fake aes-xts.fake",
-	sha1_asm_src    => "sha1-s390x.S sha256-s390x.S sha512-s390x.S",
-	rc4_asm_src     => "rc4-s390x.s",
-	modes_asm_src   => "ghash-s390x.S",
-	chacha_asm_src  => "chacha-s390x.S",
-	poly1305_asm_src=> "poly1305-s390x.S",
-    },
-    armv4_asm => {
-	template	=> 1,
-	cpuid_asm_src   => "armcap.c armv4cpuid.S",
-	bn_asm_src      => "bn_asm.c armv4-mont.S armv4-gf2m.S",
-	ec_asm_src      => "ecp_nistz256.c ecp_nistz256-armv4.S",
-	aes_asm_src     => "aes_cbc.c aes-armv4.S bsaes-armv7.S aesv8-armx.S",
-	sha1_asm_src    => "sha1-armv4-large.S sha256-armv4.S sha512-armv4.S",
-	modes_asm_src   => "ghash-armv4.S ghashv8-armx.S",
-	chacha_asm_src  => "chacha-armv4.S",
-	poly1305_asm_src=> "poly1305-armv4.S", 
-	perlasm_scheme	=> "void"
-    },
-    aarch64_asm => {
-	template	=> 1,
-	cpuid_asm_src   => "armcap.c arm64cpuid.S mem_clr.c",
-	ec_asm_src      => "ecp_nistz256.c ecp_nistz256-armv8.S",
-	bn_asm_src      => "bn_asm.c armv8-mont.S",
-	aes_asm_src     => "aes_core.c aes_cbc.c aesv8-armx.S vpaes-armv8.S",
-	sha1_asm_src    => "sha1-armv8.S sha256-armv8.S sha512-armv8.S",
-	modes_asm_src   => "ghashv8-armx.S",
-	chacha_asm_src  => "chacha-armv8.S",
-	poly1305_asm_src=> "poly1305-armv8.S",
-    },
-    parisc11_asm => {
-	template	=> 1,
-	cpuid_asm_src   => "pariscid.s",
-	bn_asm_src      => "bn_asm.c parisc-mont.s",
-	aes_asm_src     => "aes_core.c aes_cbc.c aes-parisc.s",
-	sha1_asm_src    => "sha1-parisc.s sha256-parisc.s sha512-parisc.s",
-	rc4_asm_src     => "rc4-parisc.s",
-	modes_asm_src   => "ghash-parisc.s",
-	perlasm_scheme	=> "32"
-    },
-    parisc20_64_asm => {
-	template	=> 1,
-	inherit_from	=> [ "parisc11_asm" ],
-	perlasm_scheme	=> "64",
-    },
-    ppc64_asm => {
-	template	=> 1,
-	cpuid_asm_src   => "ppccpuid.s ppccap.c",
-	bn_asm_src      => "bn-ppc.s ppc-mont.s ppc64-mont.s",
-	aes_asm_src     => "aes_core.c aes_cbc.c aes-ppc.s vpaes-ppc.s aesp8-ppc.s",
-	sha1_asm_src    => "sha1-ppc.s sha256-ppc.s sha512-ppc.s sha256p8-ppc.s sha512p8-ppc.s",
-	modes_asm_src   => "ghashp8-ppc.s",
-	chacha_asm_src	=> "chacha-ppc.s",
-	poly1305_asm_src=> "poly1305-ppc.s poly1305-ppcfp.s",
-    },
-    ppc32_asm => {
-	inherit_from	=> [ "ppc64_asm" ],
-	template	=> 1
-    },
-);

Configurations/90-team.conf

@@ -1,123 +0,0 @@
-## -*- mode: perl; -*-
-## Build configuration targets for openssl-team members
-##
-## If you edit this file, run this command before committing
-##	make -f Makefile.in TABLE
-## This file is interpolated by the Configure script.
-
-%targets = (
-    "purify" => {
-        cc               => "purify gcc",
-        cflags           => "-g -Wall",
-        thread_cflag     => "(unknown)",
-        ex_libs          => "-lsocket -lnsl",
-    },
-    "debug" => {
-        cc               => "gcc",
-        cflags           => "-DBN_DEBUG -DREF_DEBUG -DCONF_DEBUG -DBN_CTX_DEBUG -DOPENSSL_NO_ASM -ggdb -g2 -Wformat -Wshadow -Wmissing-prototypes -Wmissing-declarations -Werror",
-        thread_cflag     => "(unknown)",
-        ex_libs          => "-lefence",
-    },
-    "debug-erbridge" => {
-        inherit_from     => [ "x86_64_asm" ],
-        cc               => "gcc",
-        cflags           => "$gcc_devteam_warn -DBN_DEBUG -DCONF_DEBUG -m64 -DL_ENDIAN -DTERMIO -g",
-        thread_cflag     => "-D_REENTRANT",
-        ex_libs          => "-ldl",
-        bn_ops           => "SIXTY_FOUR_BIT_LONG",
-        perlasm_scheme   => "elf",
-        dso_scheme       => "dlfcn",
-        shared_target    => "linux-shared",
-        shared_cflag     => "-fPIC",
-        shared_ldflag    => "-m64",
-        shared_extension => ".so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
-        multilib         => "64",
-    },
-    "debug-linux-pentium" => {
-        inherit_from     => [ "x86_elf_asm" ],
-        cc               => "gcc",
-        cflags           => "-DBN_DEBUG -DREF_DEBUG -DCONF_DEBUG -DBN_CTX_DEBUG -DL_ENDIAN -g -mcpu=pentium -Wall",
-        thread_cflag     => "-D_REENTRANT",
-        ex_libs          => "-ldl",
-        bn_ops           => "BN_LLONG",
-        dso_scheme       => "dlfcn",
-    },
-    "debug-linux-ppro" => {
-        inherit_from     => [ "x86_elf_asm" ],
-        cc               => "gcc",
-        cflags           => "-DBN_DEBUG -DREF_DEBUG -DCONF_DEBUG -DBN_CTX_DEBUG -DL_ENDIAN -g -mcpu=pentiumpro -Wall",
-        thread_cflag     => "-D_REENTRANT",
-        ex_libs          => "-ldl",
-        bn_ops           => "BN_LLONG",
-        dso_scheme       => "dlfcn",
-    },
-    "debug-linux-elf-noefence" => {
-        inherit_from     => [ "x86_elf_asm" ],
-        cc               => "gcc",
-        cflags           => "-DBN_DEBUG -DREF_DEBUG -DCONF_DEBUG -DBN_CTX_DEBUG -DL_ENDIAN -g -march=i486 -Wall",
-        thread_cflag     => "-D_REENTRANT",
-        ex_libs          => "-ldl",
-        bn_ops           => "BN_LLONG",
-        dso_scheme       => "dlfcn",
-        shared_target    => "linux-shared",
-        shared_cflag     => "-fPIC",
-        shared_extension => ".so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
-    },
-    "debug-linux-ia32-aes" => {
-        cc               => "gcc",
-        cflags           => "-DAES_EXPERIMENTAL -DL_ENDIAN -O3 -fomit-frame-pointer -Wall",
-        thread_cflag     => "-D_REENTRANT",
-        ex_libs          => "-ldl",
-        bn_ops           => "BN_LLONG",
-        cpuid_asm_src    => "x86cpuid.s",
-        bn_asm_src       => "bn-586.s co-586.s x86-mont.s",
-        des_asm_src      => "des-586.s crypt586.s",
-        aes_asm_src      => "aes_x86core.s aes_cbc.s aesni-x86.s",
-        bf_asm_src       => "bf-586.s",
-        md5_asm_src      => "md5-586.s",
-        sha1_asm_src     => "sha1-586.s sha256-586.s sha512-586.s",
-        cast_asm_src     => "cast-586.s",
-        rc4_asm_src      => "rc4-586.s",
-        rmd160_asm_src   => "rmd-586.s",
-        rc5_asm_src      => "rc5-586.s",
-        wp_asm_src       => "wp_block.s wp-mmx.s",
-        modes_asm_src    => "ghash-x86.s",
-        padlock_asm_src  => "e_padlock-x86.s",
-        perlasm_scheme   => "elf",
-        dso_scheme       => "dlfcn",
-        shared_target    => "linux-shared",
-        shared_cflag     => "-fPIC",
-        shared_extension => ".so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
-    },
-    "dist" => {
-        cc               => "cc",
-        cflags           => "-O",
-        thread_cflag     => "(unknown)",
-    },
-    "debug-test-64-clang" => {
-        inherit_from     => [ "x86_64_asm" ],
-        cc               => "clang",
-        cflags           => "$gcc_devteam_warn -Wno-error=overlength-strings -Wno-error=extended-offsetof -Wno-error=language-extension-token -Wno-error=unused-const-variable -Wstrict-overflow -Qunused-arguments -DBN_DEBUG -DCONF_DEBUG -DDEBUG_SAFESTACK -DDEBUG_UNUSED -g3 -O3 -pipe",
-        thread_cflag     => "${BSDthreads}",
-        bn_ops           => "SIXTY_FOUR_BIT_LONG",
-        perlasm_scheme   => "elf",
-        dso_scheme       => "dlfcn",
-        shared_target    => "bsd-gcc-shared",
-        shared_cflag     => "-fPIC",
-        shared_extension => ".so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
-    },
-    "darwin64-debug-test-64-clang" => {
-        inherit_from     => [ "x86_64_asm" ],
-        cc               => "clang",
-        cflags           => "-arch x86_64 -DL_ENDIAN $gcc_devteam_warn -Wno-error=overlength-strings -Wno-error=extended-offsetof -Wno-error=language-extension-token -Wno-error=unused-const-variable -Wstrict-overflow -Qunused-arguments -DBN_DEBUG -DCONF_DEBUG -DDEBUG_SAFESTACK -DDEBUG_UNUSED -g3 -O3 -pipe",
-        thread_cflag     => "${BSDthreads}",
-        sys_id           => "MACOSX",
-        bn_ops           => "SIXTY_FOUR_BIT_LONG",
-        perlasm_scheme   => "macosx",
-        dso_scheme       => "dlfcn",
-        shared_target    => "darwin-shared",
-        shared_cflag     => "-fPIC -fno-common",
-        shared_ldflag    => "-arch x86_64 -dynamiclib",
-        shared_extension => ".\$(SHLIB_MAJOR).\$(SHLIB_MINOR).dylib",
-    },
-);

Configurations/99-personal-ben.conf

@@ -1,95 +0,0 @@
-## -*- mode: perl; -*-
-## Personal configuration targets
-##
-## If you edit this file, run this command before committing
-##	make -f Makefile.in TABLE
-## This file is interpolated by the Configure script.
-
-%targets = (
-    "debug-ben" => {
-        cc               => "gcc",
-        cflags           => "$gcc_devteam_warn -DBN_DEBUG -DREF_DEBUG -DCONF_DEBUG -DBN_CTX_DEBUG -DDEBUG_SAFESTACK -O2 -pipe",
-        thread_cflag     => "(unknown)",
-    },
-    "debug-ben-openbsd" => {
-        cc               => "gcc",
-        cflags           => "-DBN_DEBUG -DREF_DEBUG -DCONF_DEBUG -DBN_CTX_DEBUG -DPEDANTIC -DDEBUG_SAFESTACK -DOPENSSL_OPENBSD_DEV_CRYPTO -DOPENSSL_NO_ASM -O2 -pedantic -Wall -Wshadow -Werror -pipe",
-        thread_cflag     => "(unknown)",
-    },
-    "debug-ben-openbsd-debug" => {
-        cc               => "gcc",
-        cflags           => "-DBN_DEBUG -DREF_DEBUG -DCONF_DEBUG -DBN_CTX_DEBUG -DPEDANTIC -DDEBUG_SAFESTACK -DOPENSSL_OPENBSD_DEV_CRYPTO -DOPENSSL_NO_ASM -g3 -O2 -pedantic -Wall -Wshadow -Werror -pipe",
-        thread_cflag     => "(unknown)",
-    },
-    "debug-ben-debug" => {
-        cc               => "gcc",
-        cflags           => "$gcc_devteam_warn -DBN_DEBUG -DCONF_DEBUG -DDEBUG_SAFESTACK -DOPENSSL_NO_HW_PADLOCK -g3 -O2 -pipe",
-        thread_cflag     => "(unknown)",
-    },
-    "debug-ben-debug-64" => {
-        inherit_from     => [ "x86_64_asm" ],
-        cc               => "gcc",
-        cflags           => "$gcc_devteam_warn -Wno-error=overlength-strings -DBN_DEBUG -DCONF_DEBUG -DDEBUG_SAFESTACK -DDEBUG_UNUSED -g3 -O3 -pipe",
-        thread_cflag     => "${BSDthreads}",
-        bn_ops           => "SIXTY_FOUR_BIT_LONG",
-        perlasm_scheme   => "elf",
-        dso_scheme       => "dlfcn",
-        shared_target    => "bsd-gcc-shared",
-        shared_cflag     => "-fPIC",
-        shared_extension => ".so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
-    },
-    "debug-ben-debug-64-clang" => {
-        inherit_from     => [ "x86_64_asm" ],
-        cc               => "clang",
-        cflags           => "$gcc_devteam_warn -Wno-error=overlength-strings -Wno-error=extended-offsetof -Wno-error=language-extension-token -Wstrict-overflow -Qunused-arguments -DBN_DEBUG -DCONF_DEBUG -DDEBUG_SAFESTACK -DDEBUG_UNUSED -g3 -O3 -pipe",
-        thread_cflag     => "${BSDthreads}",
-        bn_ops           => "SIXTY_FOUR_BIT_LONG",
-        perlasm_scheme   => "elf",
-        dso_scheme       => "dlfcn",
-        shared_target    => "bsd-gcc-shared",
-        shared_cflag     => "-fPIC",
-        shared_extension => ".so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
-    },
-    "debug-ben-debug-64-noopt" => {
-        inherit_from     => [ "x86_64_asm" ],
-        cc               => "gcc",
-        cflags           => "$gcc_devteam_warn -Wno-error=overlength-strings -DBN_DEBUG -DCONF_DEBUG -DDEBUG_SAFESTACK -DDEBUG_UNUSED -g3 -pipe",
-        thread_cflag     => "${BSDthreads}",
-        bn_ops           => "SIXTY_FOUR_BIT_LONG",
-        perlasm_scheme   => "elf",
-        dso_scheme       => "dlfcn",
-        shared_target    => "bsd-gcc-shared",
-        shared_cflag     => "-fPIC",
-        shared_extension => ".so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
-    },
-    "debug-ben-macos" => {
-        cc               => "cc",
-        cflags           => "$gcc_devteam_warn -DOPENSSL_NO_ASM -DBN_DEBUG -DCONF_DEBUG -DDEBUG_SAFESTACK -DDEBUG_UNUSED -DOPENSSL_THREADS -D_REENTRANT -DDSO_DLFCN -DHAVE_DLFCN_H -arch i386 -O3 -DL_ENDIAN -g3 -pipe",
-        thread_cflag     => "(unknown)",
-    },
-    "debug-ben-no-opt" => {
-        cc               => "gcc",
-        cflags           => " -Wall -Wmissing-prototypes -Wstrict-prototypes -Wmissing-declarations -DDEBUG_SAFESTACK -Werror -DL_ENDIAN -Wall -g3",
-        thread_cflag     => "(unknown)",
-    },
-    "debug-ben-strict" => {
-        cc               => "gcc",
-        cflags           => "-DBN_DEBUG -DREF_DEBUG -DCONF_DEBUG -DBN_CTX_DEBUG -DCONST_STRICT -O2 -Wall -Wshadow -Werror -Wpointer-arith -Wcast-qual -Wwrite-strings -pipe",
-        thread_cflag     => "(unknown)",
-    },
-    "debug-ben-darwin64" => {
-        inherit_from     => [ "x86_64_asm" ],
-        cc               => "cc",
-        cflags           => "$gcc_devteam_warn -Wno-language-extension-token -Wno-extended-offsetof -arch x86_64 -O3 -DL_ENDIAN -DMD32_REG_T=int -Wall",
-        thread_cflag     => "-D_REENTRANT",
-        sys_id           => "MACOSX",
-        plib_lflags      => "-Wl,-search_paths_first",
-        bn_ops           => "SIXTY_FOUR_BIT_LONG",
-        perlasm_scheme   => "macosx",
-        dso_scheme       => "dlfcn",
-        shared_target    => "darwin-shared",
-        shared_cflag     => "-fPIC -fno-common",
-        shared_ldflag    => "-arch x86_64 -dynamiclib",
-        shared_extension => ".\$(SHLIB_MAJOR).\$(SHLIB_MINOR).dylib",
-    },
-);

Configurations/99-personal-bodo.conf

@@ -1,24 +0,0 @@
-## -*- mode: perl; -*-
-## Personal configuration targets
-##
-## If you edit this file, run this command before committing
-##	make -f Makefile.in TABLE
-## This file is interpolated by the Configure script.
-
-%targets = (
-    "debug-bodo" => {
-        inherit_from     => [ "x86_64_asm" ],
-        cc               => "gcc",
-        cflags           => "$gcc_devteam_warn -Wno-error=overlength-strings -DBN_DEBUG -DBN_DEBUG_RAND -DCONF_DEBUG -m64 -DL_ENDIAN -DTERMIO -g -DMD32_REG_T=int",
-        thread_cflag     => "-D_REENTRANT",
-        ex_libs          => "-ldl",
-        bn_ops           => "SIXTY_FOUR_BIT_LONG",
-        perlasm_scheme   => "elf",
-        dso_scheme       => "dlfcn",
-        shared_target    => "linux-shared",
-        shared_cflag     => "-fPIC",
-        shared_ldflag    => "-m64",
-        shared_extension => ".so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
-        multilib         => "64",
-    },
-);

Configurations/99-personal-geoff.conf

@@ -1,31 +0,0 @@
-## -*- mode: perl; -*-
-## Personal configuration targets
-##
-## If you edit this file, run this command before committing
-##	make -f Makefile.in TABLE
-## This file is interpolated by the Configure script.
-
-%targets = (
-    "debug-geoff32" => {
-        cc               => "gcc",
-        cflags           => "-DBN_DEBUG -DBN_DEBUG_RAND -DBN_STRICT -DOPENSSL_NO_DEPRECATED -DOPENSSL_NO_ASM -DOPENSSL_NO_INLINE_ASM -DL_ENDIAN -DTERMIO -DPEDANTIC -O1 -ggdb2 -Wall -Werror -Wundef -pedantic -Wshadow -Wpointer-arith -Wbad-function-cast -Wcast-align -Wsign-compare -Wmissing-prototypes -Wmissing-declarations -Wno-long-long",
-        thread_cflag     => "-D_REENTRANT",
-        ex_libs          => "-ldl",
-        bn_ops           => "BN_LLONG",
-        dso_scheme       => "dlfcn",
-        shared_target    => "linux-shared",
-        shared_cflag     => "-fPIC",
-        shared_extension => ".so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
-    },
-    "debug-geoff64" => {
-        cc               => "gcc",
-        cflags           => "-DBN_DEBUG -DBN_DEBUG_RAND -DBN_STRICT -DOPENSSL_NO_DEPRECATED -DOPENSSL_NO_ASM -DOPENSSL_NO_INLINE_ASM -DL_ENDIAN -DTERMIO -DPEDANTIC -O1 -ggdb2 -Wall -Werror -Wundef -pedantic -Wshadow -Wpointer-arith -Wbad-function-cast -Wcast-align -Wsign-compare -Wmissing-prototypes -Wmissing-declarations -Wno-long-long",
-        thread_cflag     => "-D_REENTRANT",
-        ex_libs          => "-ldl",
-        bn_ops           => "SIXTY_FOUR_BIT_LONG RC4_CHAR",
-        dso_scheme       => "dlfcn",
-        shared_target    => "linux-shared",
-        shared_cflag     => "-fPIC",
-        shared_extension => ".so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
-    },
-);

Configurations/99-personal-levitte.conf

@@ -1,23 +0,0 @@
-## -*- mode: perl; -*-
-## Personal configuration targets
-##
-## If you edit this file, run this command before committing
-##	make -f Makefile.in TABLE
-## This file is interpolated by the Configure script.
-
-%targets = (
-    "levitte-linux-elf" => {
-        inherit_from     => [ "linux-elf" ],
-        debug_cflags     => add("-ggdb -g3"),
-        debug_defines    => add(undef, "LEVITTE_DEBUG"),
-        build_scheme     => [ "unified", "unix" ],
-        build_file       => "Makefile",
-    },
-    "levitte-linux-x86_64" => {
-        inherit_from     => [ "linux-x86_64" ],
-        debug_cflags     => add("-ggdb -g3"),
-        debug_defines    => add(undef, "LEVITTE_DEBUG"),
-        build_scheme     => [ "unified", "unix" ],
-        build_file       => "Makefile",
-    },
-);

Configurations/99-personal-rse.conf

@@ -1,16 +0,0 @@
-## -*- mode: perl; -*-
-## Personal configuration targets
-##
-## If you edit this file, run this command before committing
-##	make -f Makefile.in TABLE
-## This file is interpolated by the Configure script.
-
-%targets = (
-    "debug-rse" => {
-        inherit_from     => [ "x86_elf_asm" ],
-        cc               => "cc",
-        cflags           => "-DL_ENDIAN -pipe -O -g -ggdb3 -Wall",
-        thread_cflag     => "(unknown)",
-        bn_ops           => "BN_LLONG",
-    },
-);

Configurations/99-personal-steve.conf

@@ -1,51 +0,0 @@
-## -*- mode: perl; -*-
-## Personal configuration targets
-##
-## If you edit this file, run this command before committing
-##	make -f Makefile.in TABLE
-## This file is interpolated by the Configure script.
-
-%targets = (
-    "debug-steve64" => {
-        inherit_from     => [ "x86_64_asm" ],
-        cc               => "gcc",
-        cflags           => "$gcc_devteam_warn -pthread -m64 -DL_ENDIAN -DTERMIO -DCONF_DEBUG -g",
-        thread_cflag     => "-D_REENTRANT",
-        ex_libs          => "-ldl",
-        bn_ops           => "SIXTY_FOUR_BIT_LONG",
-        perlasm_scheme   => "elf",
-        dso_scheme       => "dlfcn",
-        shared_target    => "linux-shared",
-        shared_cflag     => "-fPIC",
-        shared_ldflag    => "-m64",
-        shared_extension => ".so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
-    },
-    "debug-steve32" => {
-        inherit_from     => [ "x86_elf_asm" ],
-        cc               => "gcc",
-        cflags           => "$gcc_devteam_warn -pthread -m32 -DL_ENDIAN -DCONF_DEBUG -g",
-        thread_cflag     => "-D_REENTRANT",
-        lflags           => "-rdynamic",
-        ex_libs          => "-ldl",
-        bn_ops           => "BN_LLONG",
-        dso_scheme       => "dlfcn",
-        shared_target    => "linux-shared",
-        shared_cflag     => "-fPIC",
-        shared_ldflag    => "-m32",
-        shared_extension => ".so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
-    },
-    "debug-steve-opt" => {
-        inherit_from     => [ "x86_64_asm" ],
-        cc               => "gcc",
-        cflags           => "$gcc_devteam_warn -pthread -m64 -O3 -DL_ENDIAN -DTERMIO -DCONF_DEBUG -g",
-        thread_cflag     => "-D_REENTRANT",
-        ex_libs          => "-ldl",
-        bn_ops           => "SIXTY_FOUR_BIT_LONG",
-        perlasm_scheme   => "elf",
-        dso_scheme       => "dlfcn",
-        shared_target    => "linux-shared",
-        shared_cflag     => "-fPIC",
-        shared_ldflag    => "-m64",
-        shared_extension => ".so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
-    },
-);

Configurations/README

@@ -1,621 +0,0 @@
-Configurations of OpenSSL target platforms
-==========================================
-
-Target configurations are a collection of facts that we know about
-different platforms and their capabilities.  We organise them in a
-hash table, where each entry represent a specific target.
-
-In each table entry, the following keys are significant:
-
-        inherit_from    => Other targets to inherit values from.
-                           Explained further below. [1]
-        template        => Set to 1 if this isn't really a platform
-                           target.  Instead, this target is a template
-                           upon which other targets can be built.
-                           Explained further below.  [1]
-
-        sys_id          => System identity for systems where that
-                           is difficult to determine automatically.
-
-        cc              => The compiler command, usually one of "cc",
-                           "gcc" or "clang".  This command is normally
-                           also used to link object files and
-                           libraries into the final program.
-        cflags          => Flags that are used at all times when
-                           compiling.
-        defines         => As an alternative, macro definitions may be
-                           present here instead of in `cflags'.  If
-                           given here, they MUST be as an array of the
-                           string such as "MACRO=value", or just
-                           "MACRO" for definitions without value.
-        debug_cflags    => Extra compilation flags used when making a
-                           debug build (when Configure receives the
-                           --debug option).  Typically something like
-                           "-g -O0".
-        debug_defines   => Similarly to `debug_cflags', this gets
-                           combined with `defines' during a debug
-                           build.  The value here MUST also be an
-                           array of the same form as for `defines'.
-        release_cflags  => Extra compilation flags used when making a
-                           release build (when Configure receives the
-                           --release option, or doesn't receive the
-                           --debug option).  Typically something like
-                           "-O" or "-O3".
-        release_defines => Similarly to `release_cflags', this gets
-                           combined with `defines' during a release
-                           build.  The value here MUST also be an
-                           array of the same form as for `defines'.
-        thread_cflags   => Extra compilation flags used when
-                           compiling with threading enabled.
-                           Explained further below.  [2]
-        thread_defines  => Similarly to `thread_cflags', this gets
-                           combined with `defines' when threading is
-                           enabled.  The value here MUST also be an
-                           array of the same form as for `defines'.
-        shared_cflag    => Extra compilation flags used when
-                           compiling for shared libraries, typically
-                           something like "-fPIC".
-
-        (linking is a complex thing, see [3] below)
-        ld              => Linker command, usually not defined
-                           (meaning the compiler command is used
-                           instead).
-                           (NOTE: this is here for future use, it's
-                           not implemented yet)
-        lflags          => Flags that are used when linking apps.
-        shared_ldflag   => Flags that are used when linking shared
-                           or dynamic libraries.
-        plib_lflags     => Extra linking flags to appear just before
-                           the libraries on the command line.
-        ex_libs         => Extra libraries that are needed when
-                           linking.
-
-        debug_lflags    => Like debug_cflags, but used when linking.
-        release_lflags  => Like release_cflags, but used when linking.
-
-        ar              => The library archive command, the default is
-                           "ar".
-                           (NOTE: this is here for future use, it's
-                           not implemented yet)
-        arflags         => Flags to be used with the library archive
-                           command.
-
-        ranlib          => The library archive indexing command, the
-                           default is 'ranlib' it it exists.
-
-        unistd          => An alternative header to the typical
-                           '<unistd.h>'.  This is very rarely needed.
-
-        shared_extension => File name extension used for shared
-                            libraries. 
-        obj_extension   => File name extension used for object files.
-                           On unix, this defaults to ".o" (NOTE: this
-                           is here for future use, it's not
-                           implemented yet)
-        exe_extension   => File name extension used for executable
-                           files.  On unix, this defaults to "" (NOTE:
-                           this is here for future use, it's not
-                           implemented yet)
-
-        dso_scheme      => The type of dynamic shared objects to build
-                           for.  This mostly comes into play with
-                           engines, but can be used for other purposes
-                           as well.  Valid values are "DLFCN"
-                           (dlopen() et al), "DLFCN_NO_H" (for systems
-                           that use dlopen() et al but do not have
-                           fcntl.h), "DL" (shl_load() et al), "WIN32"
-                           and "VMS".
-        perlasm_scheme  => The perlasm method used to created the
-                           assembler files used when compiling with
-                           assembler implementations.
-        shared_target   => The shared library building method used.
-                           This is a target found in Makefile.shared.
-        build_scheme    => The scheme used to build up a Makefile.
-                           In its simplest form, the value is a string
-                           with the name of the build scheme.
-                           The value may also take the form of a list
-                           of strings, if the build_scheme is to have
-                           some options.  In this case, the first
-                           string in the list is the name of the build
-                           scheme.
-                           Currently recognised build schemes are
-                           "mk1mf" and "unixmake" and "unified".
-                           For the "unified" build scheme, this item
-                           *must* be an array with the first being the
-                           word "unified" and the second being a word
-                           to identify the platform family.
-
-        multilib        => On systems that support having multiple
-                           implementations of a library (typically a
-                           32-bit and a 64-bit variant), this is used
-                           to have the different variants in different
-                           directories.
-
-        bn_ops          => Building options (was just bignum options
-                           in the earlier history of this option,
-                           hence the name).  This a string of words
-                           that describe properties on the designated
-                           target platform, such as the type of
-                           integers used to build up the bitnum,
-                           different ways to implement certain ciphers
-                           and so on.  To fully comprehend the
-                           meaning, the best is to read the affected
-                           source.
-                           The valid words are:
-
-                           BN_LLONG     use 'unsigned long long' in
-                                        some bignum calculations.
-                                        This has no value when
-                                        SIXTY_FOUR_BIT or
-                                        SIXTY_FOUR_BIT_LONG is given.
-                           RC4_CHAR     makes the basic RC4 unit of
-                                        calculation an unsigned char.
-                           SIXTY_FOUR_BIT       processor registers
-                                                are 64 bits, long is
-                                                32 bits, long long is
-                                                64 bits.
-                           SIXTY_FOUR_BIT_LONG  processor registers
-                                                are 64 bits, long is
-                                                64 bits.
-                           THIRTY_TWO_BIT       processor registers
-                                                are 32 bits.
-                           EXPORT_VAR_AS_FN     for shared libraries,
-                                                export vars as
-                                                accessor functions.
-
-        apps_extra_src  => Extra source to build apps/openssl, as
-                           needed by the target.
-        cpuid_asm_src   => assembler implementation of cpuid code as
-                           well as OPENSSL_cleanse().
-                           Default to mem_clr.c
-        bn_asm_src      => Assembler implementation of core bignum
-                           functions.
-                           Defaults to bn_asm.c
-        ec_asm_src      => Assembler implementation of core EC
-                           functions.
-        des_asm_src     => Assembler implementation of core DES
-                           encryption functions.
-                           Defaults to 'des_enc.c fcrypt_b.c'
-        aes_asm_src     => Assembler implementation of core AES
-                           functions.
-                           Defaults to 'aes_core.c aes_cbc.c'
-        bf_asm_src      => Assembler implementation of core BlowFish
-                           functions.
-                           Defaults to 'bf_enc.c'
-        md5_asm_src     => Assembler implementation of core MD5
-                           functions.
-        sha1_asm_src    => Assembler implementation of core SHA1,
-                           functions, and also possibly SHA256 and
-                           SHA512 ones.
-        cast_asm_src    => Assembler implementation of core CAST
-                           functions.
-                           Defaults to 'c_enc.c'
-        rc4_asm_src     => Assembler implementation of core RC4
-                           functions.
-                           Defaults to 'rc4_enc.c rc4_skey.c'
-        rmd160_asm_src  => Assembler implementation of core RMD160
-                           functions.
-        rc5_asm_src     => Assembler implementation of core RC5
-                           functions.
-                           Defaults to 'rc5_enc.c'
-        wp_asm_src      => Assembler implementation of core WHIRLPOOL
-                           functions.
-        cmll_asm_src    => Assembler implementation of core CAMELLIA
-                           functions.
-                           Defaults to 'camellia.c cmll_misc.c cmll_cbc.c'
-        modes_asm_src   => Assembler implementation of cipher modes,
-                           currently the functions gcm_gmult_4bit and
-                           gcm_ghash_4bit.
-        padlock_asm_src => Assembler implementation of core parts of
-                           the padlock engine.  This is mandatory on
-                           any platform where the padlock engine might
-                           actually be built.
-
-
-[1] as part of the target configuration, one can have a key called
-    'inherit_from' that indicate what other configurations to inherit
-    data from.  These are resolved recursively.
-
-    Inheritance works as a set of default values that can be overriden
-    by corresponding key values in the inheriting configuration.
-
-    Note 1: any configuration table can be used as a template.
-    Note 2: pure templates have the attribute 'template => 1' and
-            cannot be used as build targets.
-
-    If several configurations are given in the 'inherit_from' array,
-    the values of same attribute are concatenated with space
-    separation.  With this, it's possible to have several smaller
-    templates for different configuration aspects that can be combined
-    into a complete configuration.
-
-    instead of a scalar value or an array, a value can be a code block
-    of the form 'sub { /* your code here */ }'.  This code block will
-    be called with the list of inherited values for that key as
-    arguments.  In fact, the concatenation of strings is really done
-    by using 'sub { join(" ",@_) }' on the list of inherited values.
-
-    An example:
-
-        "foo" => {
-                template => 1,
-                haha => "ha ha",
-                hoho => "ho",
-                ignored => "This should not appear in the end result",
-        },
-        "bar" => {
-                template => 1,
-                haha => "ah",
-                hoho => "haho",
-                hehe => "hehe"
-        },
-        "laughter" => {
-                inherit_from => [ "foo", "bar" ],
-                hehe => sub { join(" ",(@_,"!!!")) },
-                ignored => "",
-        }
-
-        The entry for "laughter" will become as follows after processing:
-
-        "laughter" => {
-                haha => "ha ha ah",
-                hoho => "ho haho",
-                hehe => "hehe !!!",
-                ignored => ""
-        }
-
-[2] OpenSSL is built with threading capabilities unless the user
-    specifies 'no-threads'.  The value of the key 'thread_cflags' may
-    be "(unknown)", in which case the user MUST give some compilation
-    flags to Configure.
-
-[3] OpenSSL has three types of things to link from object files or
-    static libraries:
-
-    - shared libraries; that would be libcrypto and libssl.
-    - shared objects (sometimes called dynamic libraries);  that would
-      be the engines.
-    - applications; those are apps/openssl and all the test apps.
-
-    Very roughly speaking, linking is done like this (words in braces
-    represent the configuration settings documented at the beginning
-    of this file):
-
-    shared libraries:
-        {ld} $(CFLAGS) {shared_ldflag} -shared -o libfoo.so \
-            -Wl,--whole-archive libfoo.a -Wl,--no-whole-archive \
-            {plib_lflags} -lcrypto {ex_libs}
-
-    shared objects:
-        {ld} $(CFLAGS) {shared_ldflag} -shared -o libeng.so \
-            blah1.o blah2.o {plib_lflags} -lcrypto {ex_libs}
-
-    applications:
-        {ld} $(CFLAGS) {lflags} -o app \
-            app1.o utils.o {plib_lflags} -lssl -lcrypto {ex_libs}
-
-
-Historically, the target configurations came in form of a string with
-values separated by colons.  This use is deprecated.  The string form
-looked like this:
-
-   "target" => "{cc}:{cflags}:{unistd}:{thread_cflag}:{sys_id}:{lflags}:{bn_ops}:{cpuid_obj}:{bn_obj}:{ec_obj}:{des_obj}:{aes_obj}:{bf_obj}:{md5_obj}:{sha1_obj}:{cast_obj}:{rc4_obj}:{rmd160_obj}:{rc5_obj}:{wp_obj}:{cmll_obj}:{modes_obj}:{padlock_obj}:{perlasm_scheme}:{dso_scheme}:{shared_target}:{shared_cflag}:{shared_ldflag}:{shared_extension}:{ranlib}:{arflags}:{multilib}"
-
-
-Build info files
-================
-
-The build.info files that are spread over the source tree contain the
-minimum information needed to build and distribute OpenSSL.  It uses a
-simple and yet fairly powerful language to determine what needs to be
-built, from what sources, and other relationships between files.
-
-For every build.info file, all file references are relative to the
-directory of the build.info file for source files, and the
-corresponding build directory for built files if the build tree
-differs from the source tree.
-
-When processed, every line is processed with the perl module
-Text::Template, using the delimiters "{-" and "-}".  The hashes
-%config and %target are passed to the perl fragments, along with
-$sourcedir and $builddir, which are the locations of the source
-directory for the current build.info file and the corresponding build
-directory, all relative to the top of the build tree.
-
-To begin with, things to be built are declared by setting specific
-variables:
-
-    PROGRAMS=foo bar
-    LIBS=libsomething
-    ENGINES=libeng
-    SCRIPTS=myhack
-    EXTRA=file1 file2
-
-Note that the files mentioned for PROGRAMS, LIBS and ENGINES *must* be
-without extensions.  The build file templates will figure them out.
-
-For each thing to be built, it is then possible to say what sources
-they are built from:
-
-    PROGRAMS=foo bar
-    SOURCE[foo]=foo.c common.c
-    SOURCE[bar]=bar.c extra.c common.c
-
-It's also possible to tell some other dependencies:
-
-    DEPEND[foo]=libsomething
-    DEPEND[libbar]=libsomethingelse
-
-(it could be argued that 'libsomething' and 'libsomethingelse' are
-source as well.  However, the files given through SOURCE are expected
-to be located in the source tree while files given through DEPEND are
-expected to be located in the build tree)
-
-For some libraries, we maintain files with public symbols and their
-slot in a transfer vector (important on some platforms).  It can be
-declared like this:
-
-    ORDINALS[libcrypto]=crypto
-
-The value is not the name of the file in question, but rather the
-argument to util/mkdef.pl that indicates which file to use.
-
-One some platforms, shared libraries come with a name that's different
-from their static counterpart.  That's declared as follows:
-
-    SHARED_NAME[libfoo]=cygfoo-{- $config{shlibver} -}
-
-The example is from Cygwin, which has a required naming convention.
-
-Sometimes, it makes sense to rename an output file, for example a
-library:
-
-    RENAME[libfoo]=libbar
-
-That lines has "libfoo" get renamed to "libbar".  While it makes no
-sense at all to just have a rename like that (why not just use
-"libbar" everywhere?), it does make sense when it can be used
-conditionally.  See a little further below for an example.
-
-For any file to be built, it's also possible to tell what extra
-include paths the build of their source files should use:
-
-    INCLUDE[foo]=include
-
-It's possible to have raw build file lines, between BEGINRAW and
-ENDRAW lines as follows:
-
-    BEGINRAW[Makefile(unix)]
-    haha.h: {- $builddir -}/Makefile
-        echo "/* haha */" > haha.h
-    ENDRAW[Makefile(unix)]
-
-The word withing square brackets is the build_file configuration item
-or the build_file configuration item followed by the second word in the
-build_scheme configuration item for the configured target within
-parenthesis as shown above.  For example, with the following relevant
-configuration items:
-
-   build_file   => "build.ninja"
-   build_scheme => [ "unified", "unix" ]
-
-... these lines will be considered:
-
-   BEGINRAW[build.ninja]
-   build haha.h: echo "/* haha */" > haha.h
-   ENDRAW[build.ninja]
-
-   BEGINRAW[build.ninja(unix)]
-   build hoho.h: echo "/* hoho */" > hoho.h
-   ENDRAW[build.ninja(unix)]
-
-See the documentation further up for more information on configuration
-items.
-
-Finally, you can have some simple conditional use of the build.info
-information, looking like this:
-
-    IF[1]
-     something
-    ELSIF[2]
-     something other
-    ELSE
-     something else
-    ENDIF
-
-The expression in square brackets is interpreted as a string in perl,
-and will be seen as true if perl thinks it is, otherwise false.  For
-example, the above would have "something" used, since 1 is true.
-
-Together with the use of Text::Template, this can be used as
-conditions based on something in the passed variables, for example:
-
-    IF[{- $config{no_shared} -}]
-      LIBS=libcrypto
-      SOURCE[libcrypto]=...
-    ELSE
-      LIBS=libfoo
-      SOURCE[libfoo]=...
-    ENDIF
-
-or:
-
-    # VMS has a cultural standard where all libraries are prefixed.
-    # For OpenSSL, the choice is 'ossl_'
-    IF[{- $config{target} =~ /^vms/ -}]
-     RENAME[libcrypto]=ossl_libcrypto
-     RENAME[libssl]=ossl_libssl
-    ENDIF
-
-
-Build-file programming with the "unified" build system
-======================================================
-
-"Build files" are called "Makefile" on Unix-like operating systems,
-"descrip.mms" for MMS on VMS, "makefile" for nmake on Windows, etc.
-
-To use the "unified" build system, the target configuration needs to
-set the three items 'build_scheme', 'build_file' and 'build_command'.
-In the rest of this section, we will assume that 'build_scheme' is set
-to "unified" (see the configurations documentation above for the
-details).
-
-For any name given by 'build_file', the "unified" system expects a
-template file in Configurations/ named like the build file, with
-".tmpl" appended, or in case of possible ambiguity, a combination of
-the second 'build_scheme' list item and the 'build_file' name.  For
-example, if 'build_file' is set to "Makefile", the template could be
-Configurations/Makefile.tmpl or Configurations/unix-Makefile.tmpl.
-In case both Configurations/unix-Makefile.tmpl and
-Configurations/Makefile.tmpl are present, the former takes
-precedence.
-
-The build-file template is processed with the perl module
-Text::Template, using "{-" and "-}" as delimiters that enclose the
-perl code fragments that generate configuration-dependent content.
-Those perl fragments have access to all the hash variables from
-configdata.pem.
-
-The build-file template is expected to define at least the following
-perl functions in a perl code fragment enclosed with "{-" and "-}".
-They are all expected to return a string with the lines they produce.
-
-    src2dep     - function that produces build file lines to get the
-                  dependencies for an object file into a dependency
-                  file.
-
-                  It's called like this:
-
-                        src2dep(obj => "PATH/TO/objectfile",
-                                srcs => [ "PATH/TO/sourcefile", ... ],
-                                deps => [ "dep1", ... ],
-                                incs => [ "INCL/PATH", ... ]);
-
-                  'obj' has the dependent object file as well as
-                  object file the dependencies are for; it's *without*
-                  extension, src2dep() is expected to add that.
-                  'srcs' has the list of source files to build the
-                  object file, with the first item being the source
-                  file that directly corresponds to the object file.
-                  'deps' is a list of explicit dependencies.  'incs'
-                  is a list of include file directories.
-
-    src2obj     - function that produces build file lines to build an
-                  object file from source files and associated data.
-
-                  It's called like this:
-
-                        src2obj(obj => "PATH/TO/objectfile",
-                                srcs => [ "PATH/TO/sourcefile", ... ],
-                                deps => [ "dep1", ... ],
-                                incs => [ "INCL/PATH", ... ]);
-
-                  'obj' has the intended object file *without*
-                  extension, src2obj() is expected to add that.
-                  'srcs' has the list of source files to build the
-                  object file, with the first item being the source
-                  file that directly corresponds to the object file.
-                  'deps' is a list of explicit dependencies.  'incs'
-                  is a list of include file directories.
-
-    obj2lib     - function that produces build file lines to build a
-                  static library file ("libfoo.a" in Unix terms) from
-                  object files.
-
-                  called like this:
-
-                        obj2lib(lib => "PATH/TO/libfile",
-                                objs => [ "PATH/TO/objectfile", ... ]);
-
-                  'lib' has the intended library file name *without*
-                  extension, obj2lib is expected to add that.  'objs'
-                  has the list of object files (also *without*
-                  extension) to build this library.
-
-    libobj2shlib - function that produces build file lines to build a
-                  shareable object library file ("libfoo.so" in Unix
-                  terms) from the corresponding static library file
-                  or object files.
-
-                  called like this:
-
-                        libobj2shlib(shlib => "PATH/TO/shlibfile",
-                                     lib => "PATH/TO/libfile",
-                                     objs => [ "PATH/TO/objectfile", ... ],
-                                     deps => [ "PATH/TO/otherlibfile", ... ],
-                                     ordinals => [ "word", "/PATH/TO/ordfile" ]);
-
-                  'lib' has the intended library file name *without*
-                  extension, libobj2shlib is expected to add that.
-                  'shlib' has the correcponding shared library name
-                  *without* extension.  'deps' has the list of other
-                  libraries (also *without* extension) this library
-                  needs to be linked with.  'objs' has the list of
-                  object files (also *without* extension) to build
-                  this library.  'ordinals' MAY be present, and when
-                  it is, its value is an array where the word is
-                  "crypto" or "ssl" and the file is one of the ordinal
-                  files util/libeay.num or util/ssleay.num in the
-                  source directory.
-
-                  This function has a choice; it can use the
-                  corresponding static library as input to make the
-                  shared library, or the list of object files.
-
-    obj2dynlib  - function that produces build file lines to build a
-                  dynamically loadable library file ("libfoo.so" on
-                  Unix) from object files.
-
-                  called like this:
-
-                        obj2dynlib(lib => "PATH/TO/libfile",
-                                   objs => [ "PATH/TO/objectfile", ... ],
-                                   deps => [ "PATH/TO/otherlibfile",
-                                   ... ]);
-
-                  This is almost the same as libobj2shlib, but the
-                  intent is to build a shareable library that can be
-                  loaded in runtime (a "plugin"...).  The differences
-                  are subtle, one of the most visible ones is that the
-                  resulting shareable library is produced from object
-                  files only.
-
-    obj2bin     - function that produces build file lines to build an
-                  executable file from object files.
-
-                  called like this:
-
-                        obj2bin(bin => "PATH/TO/binfile",
-                                objs => [ "PATH/TO/objectfile", ... ],
-                                deps => [ "PATH/TO/libfile", ... ]);
-
-                  'bin' has the intended executable file name
-                  *without* extension, obj2bin is expected to add
-                  that.  'objs' has the list of object files (also
-                  *without* extension) to build this library.  'deps'
-                  has the list of library files (also *without*
-                  extension) that the programs needs to be linked
-                  with.
-
-    in2script   - function that produces build file lines to build a
-                  script file from some input.
-
-                  called like this:
-
-                        in2script(script => "PATH/TO/scriptfile",
-                                  sources => [ "PATH/TO/infile", ... ]);
-
-                  'script' has the intended script file name.
-                  'sources' has the list of source files to build the
-                  resulting script from.
-
-In all cases, file file paths are relative to the build tree top, and
-the build file actions run with the build tree top as current working
-directory.
-
-Make sure to end the section with these functions with a string that
-you thing is apropriate for the resulting build file.  If nothing
-else, end it like this:
-
-      "";       # Make sure no lingering values end up in the Makefile
-    -}

Configurations/README.design

@@ -1,550 +0,0 @@
-Design document for the unified scheme data
-===========================================
-
-How are things connected?
--------------------------
-
-The unified scheme takes all its data from the build.info files seen
-throughout the source tree.  These files hold the minimum information
-needed to build end product files from diverse sources.  See the
-section on build.info files below.
-
-From the information in build.info files, Configure builds up an
-information database as a hash table called %unified_info, which is
-stored in configdata.pm, found at the top of the build tree (which may
-or may not be the same as the source tree).
-
-Configurations/common.tmpl uses the data from %unified_info to
-generate the rules for building end product files as well as
-intermediary files with the help of a few functions found in the
-build-file templates.  See the section on build-file templates further
-down for more information.
-
-build.info files
-----------------
-
-As mentioned earlier, build.info files are meant to hold the minimum
-information needed to build output files, and therefore only (with a
-few possible exceptions [1]) have information about end products (such
-as scripts, library files and programs) and source files (such as C
-files, C header files, assembler files, etc).  Intermediate files such
-as object files are rarely directly refered to in build.info files (and
-when they are, it's always with the file name extension .o), they are
-infered by Configure.  By the same rule of minimalism, end product
-file name extensions (such as .so, .a, .exe, etc) are never mentioned
-in build.info.  Their file name extensions will be infered by the
-build-file templates, adapted for the platform they are meant for (see
-sections on %unified_info and build-file templates further down).
-
-The variables PROGRAMS, LIBS, ENGINES and SCRIPTS are used to declare
-end products.
-
-The variables SOURCE, DEPEND, INCLUDE and ORDINALS are indexed by a
-produced file, and their values are the source used to produce that
-particular produced file, extra dependencies, include directories
-needed, and ordinal files (explained further below.
-
-All their values in all the build.info throughout the source tree are
-collected together and form a set of programs, libraries, engines and
-scripts to be produced, source files, dependencies, etc etc etc.
-
-Let's have a pretend example, a very limited contraption of OpenSSL,
-composed of the program 'apps/openssl', the libraries 'libssl' and
-'libcrypto', an engine 'engines/ossltest' and their sources and
-dependencies.
-
-    # build.info
-    LIBS=libcrypto libssl
-    ORDINALS[libcrypto]=crypto
-    ORDINALS[libssl]=ssl
-    INCLUDE[libcrypto]=include
-    INCLUDE[libssl]=include
-    DEPEND[libssl]=libcrypto
-
-This is the top directory build.info file, and it tells us that two
-libraries are to be built, there are some ordinals to be used to
-declare what symbols in those libraries are seen as public, the
-include directory 'include/' shall be used throughout when building
-anything that will end up in each library, and that the library
-'libssl' depend on the library 'libcrypto' to function properly.
-
-    # apps/build.info
-    PROGRAMS=openssl
-    SOURCE[openssl]=openssl.c
-    INCLUDE[openssl]=.. ../include
-    DEPEND[openssl]=../libssl
-
-This is the build.info file in 'apps/', one may notice that all file
-paths mentioned are relative to the directory the build.info file is
-located in.  This one tells us that there's a program to be built
-called 'apps/openssl' (the file name extension will depend on the
-platform and is therefore not mentioned in the build.info file).  It's
-built from one source file, 'apps/openssl.c', and building it requires
-the use of '.' and 'include' include directories (both are declared
-from the point of view of the 'apps/' directory), and that the program
-depends on the library 'libssl' to function properly.
-
-    # crypto/build.info
-    LIBS=../libcrypto
-    SOURCE[../libcrypto]=aes.c evp.c cversion.c
-    DEPEND[cversion.o]=buildinf.h
-    
-    BEGINRAW[Makefile(unix)]
-    crypto/buildinf.h : Makefile
-    	perl util/mkbuildinf.h "$(CC) $(CFLAGS)" "$(PLATFORM)" \
-    	    > crypto/buildinf.h
-    ENDRAW[Makefile(unix)]
-
-This is the build.info file in 'crypto', and it tells us a little more
-about what's needed to produce 'libcrypto'.  LIBS is used again to
-declare that 'libcrypto' is to be produced.  This declaration is
-really unnecessary as it's already mentioned in the top build.info
-file, but can make the info file easier to understand.  This is to
-show that duplicate information isn't an issue.
-
-This build.info file informs us that 'libcrypto' is built from a few
-source files, 'crypto/aes.c', 'crypto/evp.c' and 'crypto/cversion.c'.
-It also shows us that building the object file inferred from
-'crypto/cversion.c' depends on 'crypto/buildinf.h'.  Finally, it 
-also shows the possibility to include raw build-file statements in a
-build.info file, in this case showing how 'buildinf.h' is built on
-Unix-like operating systems.
-
-Two things are worth an extra note:
-
-'DEPEND[cversion.o]' mentiones an object file.  DEPEND indexes is the
-only location where it's valid to mention them
-
-Lines in 'BEGINRAW'..'ENDRAW' sections must always mention files as
-seen from the top directory, no exception.
-
-    # ssl/build.info
-    LIBS=../libssl
-    SOURCE[../libssl]=tls.c
-
-This is the build.info file in 'ssl/', and it tells us that the
-library 'libssl' is built from the source file 'ssl/tls.c'.
-
-    # engines/build.info
-    ENGINES=libossltest
-    SOURCE[libossltest]=e_ossltest.c
-    DEPEND[libossltest]=../libcrypto
-    INCLUDE[libossltest]=../include
-
-This is the build.info file in 'engines/', telling us that an engine
-called 'engines/libossltest' shall be built, that it's source is
-'engines/e_ossltest.c' and that the include directory 'include/' may
-be used when building anything that will be part of this engine.
-Finally, the engine 'engines/libossltest' depends on the library
-'libcrypto' to function properly.
-
-When Configure digests these build.info files, the accumulated
-information comes down to this:
-
-    LIBS=libcrypto libssl
-    ORDINALS[libcrypto]=crypto
-    SOURCE[libcrypto]=crypto/aes.c crypto/evp.c crypto/cversion.c
-    DEPEND[crypto/cversion.o]=crypto/buildinf.h
-    INCLUDE[libcrypto]=include
-    ORDINALS[libssl]=ssl
-    SOURCE[libssl]=ssl/tls.c
-    INCLUDE[libssl]=include
-    DEPEND[libssl]=libcrypto
-    
-    PROGRAMS=apps/openssl
-    SOURCE[apps/openssl]=apps/openssl.c
-    INCLUDE[apps/openssl]=. include
-    DEPEND[apps/openssl]=libssl
-
-    ENGINES=engines/libossltest
-    SOURCE[engines/libossltest]=engines/e_ossltest.c
-    DEPEND[engines/libossltest]=libcrypto
-    INCLUDE[engines/libossltest]=include
-    
-    BEGINRAW[Makefile(unix)]
-    crypto/buildinf.h : Makefile
-    	perl util/mkbuildinf.h "$(CC) $(CFLAGS)" "$(PLATFORM)" \
-    	    > crypto/buildinf.h
-    ENDRAW[Makefile(unix)]
-
-
-A few notes worth mentioning:
-
-LIBS may be used to declare routine libraries only.
-
-PROGRAMS may be used to declare programs only.
-
-ENGINES may be used to declare engines only.
-
-The indexes for SOURCE, INCLUDE and ORDINALS must only be end product
-files, such as libraries, programs or engines.  The values of SOURCE
-variables must only be source files (possibly generated)
-
-DEPEND shows a relationship between different end product files, such
-as a program depending on a library, or between an object file and
-some extra source file.
-
-When Configure processes the build.info files, it will take it as
-truth without question, and will therefore perform very few checks.
-If the build tree is separate from the source tree, it will assume
-that all built files and up in the build directory and that all source
-files are to be found in the source tree, if they can be found there.
-Configure will assume that source files that can't be found in the
-source tree (such as 'crypto/bildinf.h' in the example above) are
-generated and will be found in the build tree.
-
-
-The %unified_info database
---------------------------
-
-The information in all the build.info get digested by Configure and
-collected into the %unified_info database, divided into the following
-indexes:
-
-  depends   => a hash table containing 'file' => [ 'dependency' ... ]
-               pairs.  These are directly inferred from the DEPEND
-               variables in build.info files.
-
-  engines   => a list of engines.  These are directly inferred from
-               the ENGINES variable in build.info files.
-
-  includes  => a hash table containing 'file' => [ 'include' ... ]
-               pairs.  These are directly inferred from the INCLUDE
-               variables in build.info files.
-
-  libraries => a list of libraries.  These are directly inferred from
-               the LIBS variable in build.info files.
-
-  ordinals  => a hash table containing 'file' => [ 'word', 'ordfile' ]
-               pairs.  'file' and 'word' are directly inferred from
-               the ORDINALS variables in build.info files, while the
-               file 'ofile' comes from internal knowledge in
-               Configure.
-
-  programs  => a list of programs.  These are directly inferred from
-               the PROGRAMS variable in build.info files.
-
-  rawlines  => a list of build-file lines.  These are a direct copy of
-               the BEGINRAW..ENDRAW lines in build.info files.  Note:
-               only the BEGINRAW..ENDRAW section for the current
-               platform are copied, the rest are ignored.
-
-  scripts   => a list of scripts.  There are directly inferred from
-               the SCRIPTS variable in build.info files.
-
-  sources   => a hash table containing 'file' => [ 'sourcefile' ... ]
-               pairs.  These are indirectly inferred from the SOURCE
-               variables in build.info files.  Object files are
-               mentioned in this hash table, with source files from
-               SOURCE variables, and AS source files for programs and
-               libraries.
-
-As an example, here is how the build.info files example from the
-section above would be digested into a %unified_info table:
-
-    our %unified_info = (
-        "depends" =>
-            {
-                "apps/openssl" =>
-                    [
-                        "libssl",
-                    ],
-                "crypto/cversion.o" =>
-                    [
-                        "crypto/buildinf.h",
-                    ],
-                "engines/libossltest" =>
-                    [
-                        "libcrypto",
-                    ],
-                "libssl" =>
-                    [
-                        "libcrypto",
-                    ],
-            },
-        "engines" =>
-            [
-                "engines/libossltest",
-            ],
-        "includes" =>
-            {
-                "apps/openssl" =>
-                    [
-                        ".",
-                        "include",
-                    ],
-                "engines/libossltest" =>
-                    [
-                        "include"
-                    ],
-                "libcrypto" =>
-                    [
-                        "include",
-                    ],
-                "libssl" =>
-                    [
-                        "include",
-                    ],
-            }
-        "libraries" =>
-            [
-                "libcrypto",
-                "libssl",
-            ],
-        "ordinals" =>
-            {
-                "libcrypto" =>
-                    [
-                        "crypto",
-                        "util/libeay.num",
-                    ],
-                "libssl" =>
-                    [
-                        "ssl",
-                        "util/ssleay.num",
-                    ],
-            },
-        "programs" =>
-            [
-                "apps/openssl",
-            ],
-        "rawlines" =>
-            [
-                "crypto/buildinf.h : Makefile",
-                "	perl util/mkbuildinf.h \"\$(CC) \$(CFLAGS)\" \"\$(PLATFORM)\" \\"
-                "	    > crypto/buildinf.h"
-            ],
-        "sources" =>
-            {
-                "apps/openssl" =>
-                    [
-                        "apps/openssl.o",
-                    ],
-                "apps/openssl.o" =>
-                    [
-                        "apps/openssl.c",
-                    ],
-                "crypto/aes.o" =>
-                    [
-                        "crypto/aes.c",
-                    ],
-                "crypto/cversion.o" =>
-                    [
-                        "crypto/cversion.c",
-                    ],
-                "crypto/evp.o" =>
-                    [
-                        "crypto/evp.c",
-                    ],
-                "engines/e_ossltest.o" =>
-                    [
-                        "engines/e_ossltest.c",
-                    ],
-                "engines/libossltest" =>
-                    [
-                        "engines/e_ossltest.o",
-                    ],
-                "libcrypto" =>
-                    [
-                        "crypto/aes.c",
-                        "crypto/cversion.c",
-                        "crypto/evp.c",
-                    ],
-                "libssl" =>
-                    [
-                        "ssl/tls.c",
-                    ],
-                "ssl/tls.o" =>
-                    [
-                        "ssl/tls.c",
-                    ],
-            },
-    );
-
-As can be seen, everything in %unified_info is fairly simple nuggest
-of information.  Still, it tells us that to build all programs, we
-must build 'apps/openssl', and to build the latter, we will need to
-build all its sources ('apps/openssl.o' in this case) and all the
-other things it depends on (such as 'libssl').  All those dependencies
-need to be built as well, using the same logic, so to build 'libssl',
-we need to build 'ssl/tls.o' as well as 'libcrypto', and to build the
-latter...
-
-
-Build-file templates
---------------------
-
-Build-file templates are essentially build-files (such as Makefile on
-Unix) with perl code fragments mixed in.  Those perl code fragment
-will generate all the configuration dependent data, including all the
-rules needed to build end product files and intermediary files alike.
-At a minimum, there must be a perl code fragment that defines a set of
-functions that are used to generates specific build-file rules, to
-build static libraries from object files, to build shared libraries
-from static libraries, to programs from object files and libraries,
-etc.
-
-    src2dep     - function that produces build file lines to get the
-                  dependencies for an object file into a dependency
-                  file.
-
-                  It's called like this:
-
-                        src2dep(obj => "PATH/TO/objectfile",
-                                srcs => [ "PATH/TO/sourcefile", ... ],
-                                incs => [ "INCL/PATH", ... ]);
-
-                  'obj' has the dependent object file as well as
-                  object file the dependencies are for; it's *without*
-                  extension, src2dep() is expected to add that.
-                  'srcs' has the list of source files to build the
-                  object file, with the first item being the source
-                  file that directly corresponds to the object file.
-                  'incs' is a list of include file directories.
-
-    src2obj     - function that produces build file lines to build an
-                  object file from source files and associated data.
-
-                  It's called like this:
-
-                        src2obj(obj => "PATH/TO/objectfile",
-                                srcs => [ "PATH/TO/sourcefile", ... ],
-                                deps => [ "dep1", ... ],
-                                incs => [ "INCL/PATH", ... ]);
-
-                  'obj' has the intended object file *without*
-                  extension, src2obj() is expected to add that.
-                  'srcs' has the list of source files to build the
-                  object file, with the first item being the source
-                  file that directly corresponds to the object file.
-                  'deps' is a list of dependencies.  'incs' is a list
-                  of include file directories.
-
-    obj2lib     - function that produces build file lines to build a
-                  static library file ("libfoo.a" in Unix terms) from
-                  object files.
-
-                  called like this:
-
-                        obj2lib(lib => "PATH/TO/libfile",
-                                objs => [ "PATH/TO/objectfile", ... ]);
-
-                  'lib' has the intended library file name *without*
-                  extension, obj2lib is expected to add that.  'objs'
-                  has the list of object files (also *without*
-                  extension) to build this library.
-
-    libobj2shlib - function that produces build file lines to build a
-                  shareable object library file ("libfoo.so" in Unix
-                  terms) from the corresponding static library file
-                  or object files.
-
-                  called like this:
-
-                        libobj2shlib(shlib => "PATH/TO/shlibfile",
-                                     lib => "PATH/TO/libfile",
-                                     objs => [ "PATH/TO/objectfile", ... ],
-                                     deps => [ "PATH/TO/otherlibfile", ... ],
-                                     ordinals => [ "word", "/PATH/TO/ordfile" ]);
-
-                  'lib' has the intended library file name *without*
-                  extension, libobj2shlib is expected to add that.
-                  'shlib' has the correcponding shared library name
-                  *without* extension.  'deps' has the list of other
-                  libraries (also *without* extension) this library
-                  needs to be linked with.  'objs' has the list of
-                  object files (also *without* extension) to build
-                  this library.  'ordinals' MAY be present, and when
-                  it is, its value is an array where the word is
-                  "crypto" or "ssl" and the file is one of the ordinal
-                  files util/libeay.num or util/ssleay.num in the
-                  source directory.
-
-                  This function has a choice; it can use the
-                  corresponding static library as input to make the
-                  shared library, or the list of object files.
-
-    obj2dynlib  - function that produces build file lines to build a
-                  dynamically loadable library file ("libfoo.so" on
-                  Unix) from object files.
-
-                  called like this:
-
-                        obj2dynlib(lib => "PATH/TO/libfile",
-                                   objs => [ "PATH/TO/objectfile", ... ],
-                                   deps => [ "PATH/TO/otherlibfile",
-                                   ... ]);
-
-                  This is almost the same as libobj2shlib, but the
-                  intent is to build a shareable library that can be
-                  loaded in runtime (a "plugin"...).  The differences
-                  are subtle, one of the most visible ones is that the
-                  resulting shareable library is produced from object
-                  files only.
-
-    obj2bin     - function that produces build file lines to build an
-                  executable file from object files.
-
-                  called like this:
-
-                        obj2bin(bin => "PATH/TO/binfile",
-                                objs => [ "PATH/TO/objectfile", ... ],
-                                deps => [ "PATH/TO/libfile", ... ]);
-
-                  'bin' has the intended executable file name
-                  *without* extension, obj2bin is expected to add
-                  that.  'objs' has the list of object files (also
-                  *without* extension) to build this library.  'deps'
-                  has the list of library files (also *without*
-                  extension) that the programs needs to be linked
-                  with.
-
-    in2script   - function that produces build file lines to build a
-                  script file from some input.
-
-                  called like this:
-
-                        in2script(script => "PATH/TO/scriptfile",
-                                  sources => [ "PATH/TO/infile", ... ]);
-
-                  'script' has the intended script file name.
-                  'sources' has the list of source files to build the
-                  resulting script from.
-
-Along with the build-file templates is the driving engine
-Configurations/common.tmpl, which looks through all the information in
-%unified_info and generates all the rulesets to build libraries,
-programs and all intermediate files, using the rule generating
-functions defined in the build-file template.
-
-As an example with the smaller build.info set we've seen as an
-example, producing the rules to build 'libssl' would result in the
-following calls:
-
-    # Note: libobj2shlib will only be called if shared libraries are
-    # to be produced.
-    # Note 2: libobj2shlib gets both the name of the static library
-    # and the names of all the object files that go into it.  It's up
-    # to the implementation to decide which to use as input.
-    libobj2shlib(shlib => "libssl",
-                 lib => "libssl",
-                 objs => [ "ssl/tls.o" ],
-                 deps => [ "libcrypto" ]
-                 ordinals => [ "ssl", "util/ssleay.num" ]);
-
-    obj2lib(lib => "libssl"
-            objs => [ "ssl/tls.o" ]);
-
-    # Note 3: common.tmpl peals off the ".o" extension, as the
-    # platform at hand may have a different one.
-    src2obj(obj => "ssl/tls"
-            srcs => [ "ssl/tls.c" ],
-            deps => [ ],
-            incs => [ "include" ]);
-
-    src2dep(obj => "ssl/tls"
-            srcs => [ "ssl/tls.c" ],
-            incs => [ "include" ]);
-
-The returned strings from all those calls are then concatenated
-together and written to the resulting build-file.

Configurations/common.tmpl

@@ -1,119 +0,0 @@
-{- # -*- Mode: perl -*-
-
-     my $a;
-
- # resolvedepends and reducedepends work in tandem to make sure
- # there are no duplicate dependencies and that they are in the
- # right order.  This is especially used to sort the list of
- # libraries that a build depends on.
- sub resolvedepends {
-     my $thing = shift;
-     my @listsofar = @_;    # to check if we're looping
-     my @list = @{$unified_info{depends}->{$thing}};
-     my @newlist = ();
-     if (scalar @list) {
-         foreach my $item (@list) {
-             # It's time to break off when the dependency list starts looping
-             next if grep { $_ eq $item } @listsofar;
-             push @newlist, $item, resolvedepends($item, @listsofar, $item);
-         }
-     }
-     @newlist;
- }
- sub reducedepends {
-     my @list = @_;
-     my @newlist = ();
-     while (@list) {
-         my $item = shift @list;
-         push @newlist, $item
-             unless grep { $item eq $_ } @list;
-     }
-     @newlist;
- }
-
- # doobj is responsible for producing all the recipes that build
- # object files as well as dependency files.
- sub doobj {
-     my $obj = shift;
-     (my $obj_no_o = $obj) =~ s|\.o$||;
-     my $bin = shift;
-     if (@{$unified_info{sources}->{$obj}}) {
-         $OUT .= src2obj(obj => $obj_no_o,
-                         srcs => $unified_info{sources}->{$obj},
-                         deps => [ reducedepends(resolvedepends($obj)) ],
-                         incs => [ @{$unified_info{includes}->{$bin}},
-                                   @{$unified_info{includes}->{$obj}} ]);
-         $OUT .= src2dep(obj => $obj_no_o,
-                         srcs => $unified_info{sources}->{$obj},
-                         deps => [ reducedepends(resolvedepends($obj)) ],
-                         incs => [ @{$unified_info{includes}->{$bin}},
-                                   @{$unified_info{includes}->{$obj}} ]);
-     }
- }
-
- # dolib is responsible for building libraries.  It will call
- # libobj2shlib is shared libraries are produced, and obj2lib in all
- # cases.  It also makes sure all object files for the library are
- # built.
- sub dolib {
-     my $lib = shift;
-     if (!$config{no_shared}) {
-         my %ordinals =
-             $unified_info{ordinals}->{$lib}
-             ? (ordinals => $unified_info{ordinals}->{$lib}) : ();
-         $OUT .= libobj2shlib(shlib => $unified_info{sharednames}->{$lib},
-                              lib => $lib,
-                              objs => [ map { (my $x = $_) =~ s|\.o$||; $x }
-                                        @{$unified_info{sources}->{$lib}} ],
-                              deps => [ reducedepends(resolvedepends($lib)) ],
-                              %ordinals);
-     }
-     $OUT .= obj2lib(lib => $lib,
-                     objs => [ map { (my $x = $_) =~ s|\.o$||; $x }
-                               @{$unified_info{sources}->{$lib}} ]);
-     map { doobj($_, $lib, intent => "lib") } @{$unified_info{sources}->{$lib}};
- }
-
- # doengine is responsible for building engines.  It will call
- # obj2dynlib, and also makes sure all object files for the library
- # are built.
- sub doengine {
-     my $lib = shift;
-     $OUT .= obj2dynlib(lib => $lib,
-                        objs => [ map { (my $x = $_) =~ s|\.o$||; $x }
-                                  @{$unified_info{sources}->{$lib}} ],
-                        deps => [ resolvedepends($lib) ]);
-     map { doobj($_, $lib, intent => "lib") } @{$unified_info{sources}->{$lib}};
- }
-
- # dobin is responsible for building programs.  It will call obj2bin,
- # and also makes sure all object files for the library are built.
- sub dobin {
-     my $bin = shift;
-     my $deps = [ reducedepends(resolvedepends($bin)) ];
-     $OUT .= obj2bin(bin => $bin,
-                     objs => [ map { (my $x = $_) =~ s|\.o$||; $x }
-                               @{$unified_info{sources}->{$bin}} ],
-                     deps => $deps);
-     map { doobj($_, $bin, intent => "bin") } @{$unified_info{sources}->{$bin}};
- }
-
- # dobin is responsible for building scripts from templates.  It will
- # call in2script.
- sub doscript {
-     my $script = shift;
-     $OUT .= in2script(script => $script,
-                       sources => $unified_info{sources}->{$script});
- }
-
- # Build all known libraries, engines, programs and scripts.
- # Everything else will be handled as a consequence.
- map { dolib($_) } @{$unified_info{libraries}};
- map { doengine($_) } @{$unified_info{engines}};
- map { dobin($_) } @{$unified_info{programs}};
- map { doscript($_) } @{$unified_info{scripts}};
-
- # Finally, should there be any applicable BEGINRAW/ENDRAW sections,
- # they are added here.
- $OUT .= $_."\n" foreach(@{$unified_info{rawlines}});
--}

Configurations/descrip.mms.tmpl

@@ -1,639 +0,0 @@
-## descrip.mms to build OpenSSL on OpenVMS
-##
-## {- join("\n## ", @autowarntext) -}
-{-
-  use File::Spec::Functions qw/:DEFAULT abs2rel rel2abs/;
-
-  # Our prefix, claimed when speaking with the VSI folks Tuesday
-  # January 26th 2016
-  our $osslprefix = 'OSSL$';
-  (our $osslprefix_q = $osslprefix) =~ s/\$/\\\$/;
-
-  our $sourcedir = $config{sourcedir};
-  our $builddir = $config{builddir};
-  sub sourcefile {
-      catfile($sourcedir, @_);
-  }
-  sub buildfile {
-      catfile($builddir, @_);
-  }
-  sub sourcedir {
-      catdir($sourcedir, @_);
-  }
-  sub builddir {
-      catdir($builddir, @_);
-  }
-  sub tree {
-      (my $x = shift) =~ s|\]$|...]|;
-      $x
-  }
-  sub move {
-      my $f = catdir(@_);
-      my $b = abs2rel(rel2abs("."),rel2abs($f));
-      $sourcedir = catdir($b,$sourcedir)
-          if !file_name_is_absolute($sourcedir);
-      $builddir = catdir($b,$builddir)
-          if !file_name_is_absolute($builddir);
-      "";
-  }
-
-  # This is a horrible hack, but is needed because recursive inclusion of files
-  # in different directories does not work well with HP C.
-  my $sd = sourcedir("crypto", "async", "arch");
-  foreach (grep /\[\.crypto\.async\.arch\].*\.o$/, keys %{$unified_info{sources}}) {
-      (my $x = $_) =~ s|\.o$|.OBJ|;
-      $unified_info{before}->{$x}
-          = qq(arch = F\$PARSE("$sd","A.;",,,"SYNTAX_ONLY") - "A.;"
-        define arch 'arch');
-      $unified_info{after}->{$x}
-          = qq(deassign arch);
-  }
-  my $sd1 = sourcedir("ssl","record");
-  my $sd2 = sourcedir("ssl","statem");
-  $unified_info{before}->{"[.crypto.ct]ct_lib.OBJ"}
-      = $unified_info{before}->{"[.test]heartbeat_test.OBJ"}
-      = $unified_info{before}->{"[.test]ssltest.OBJ"}
-      = qq(record = F\$PARSE("$sd1","A.;",,,"SYNTAX_ONLY") - "A.;"
-        define record 'record'
-        statem = F\$PARSE("$sd2","A.;",,,"SYNTAX_ONLY") - "A.;"
-        define statem 'statem');
-  $unified_info{after}->{"[.crypto.ct]ct_lib.OBJ"}
-      = $unified_info{after}->{"[.test]heartbeat_test.OBJ"}
-      = $unified_info{after}->{"[.test]ssltest.OBJ"}
-      = qq(deassign statem
-        deassign record);
-  foreach (grep /^\[\.ssl\.(?:record|statem)\].*\.o$/, keys %{$unified_info{sources}}) {
-      (my $x = $_) =~ s|\.o$|.OBJ|;
-      $unified_info{before}->{$x}
-          = qq(record = F\$PARSE("$sd1","A.;",,,"SYNTAX_ONLY") - "A.;"
-        define record 'record'
-        statem = F\$PARSE("$sd2","A.;",,,"SYNTAX_ONLY") - "A.;"
-        define statem 'statem');
-      $unified_info{after}->{$x}
-          = qq(deassign statem
-        deassign record);
-  }
-  #use Data::Dumper;
-  #print STDERR "DEBUG: before:\n", Dumper($unified_info{before});
-  #print STDERR "DEBUG: after:\n", Dumper($unified_info{after});
-  "";
--}
-PLATFORM={- $config{target} -}
-OPTIONS={- $config{options} -}
-CONFIGURE_ARGS=({- join(", ",quotify_l(@{$config{perlargv}})) -})
-SRCDIR={- $config{sourcedir} -}
-BUILDDIR={- $config{builddir} -}
-
-VERSION={- $config{version} -}
-MAJOR={- $config{major} -}
-MINOR={- $config{minor} -}
-SHLIB_VERSION_NUMBER={- $config{shlib_version_number} -}
-SHLIB_VERSION_HISTORY={- $config{shlib_version_history} -}
-SHLIB_MAJOR={- $config{shlib_major} -}
-SHLIB_MINOR={- $config{shlib_minor} -}
-SHLIB_TARGET={- $target{shared_target} -}
-
-EXE_EXT=.EXE
-LIB_EXT=.OLB
-SHLIB_EXT=.EXE
-OBJ_EXT=.OBJ
-DEP_EXT=.MMS
-
-LIBS={- join(", ", map { "-\n\t".$_.".OLB" } @{$unified_info{libraries}}) -}
-SHLIBS={- join(" ", map { $_."\$(SHLIB_EXT)" } map { $unified_info{sharednames}->{$_} || () } @{$unified_info{libraries}}) -}
-ENGINES={- join(", ", map { "-\n\t".$_.".EXE" } @{$unified_info{engines}}) -}
-PROGRAMS={- join(", ", map { "-\n\t".$_.".EXE" } grep { !m|^\[\.test\]| } @{$unified_info{programs}}) -}
-TESTPROGS={- join(", ", map { "-\n\t".$_.".EXE" } grep { m|^\[\.test\]| } @{$unified_info{programs}}) -}
-SCRIPTS={- join(", ", map { "-\n\t".$_ } @{$unified_info{scripts}}) -}
-
-# DESTDIR is for package builders so that they can configure for, say,
-# SYS$COMMON:[OPENSSL] and yet have everything installed in STAGING:[USER].
-# In that case, configure with --prefix=SYS$COMMON:[OPENSSL] and then run
-# MMS with /MACROS=(DESTDIR=STAGING:[USER]).  The result will end up in
-# STAGING:[USER.OPENSSL].
-# Normally it is left empty.
-DESTDIR=
-
-# Do not edit this manually. Use Configure --prefix=DIR to change this!
-INSTALLTOP={- catdir($config{prefix}) || "SYS\$COMMON:[OPENSSL-\$(MAJOR).\$(MINOR)]" -}
-# This is the standard central area to store certificates, private keys...
-OPENSSLDIR={- catdir($config{openssldir}) ||
-              $config{prefix} ? catdir($config{prefix},"SSL")
-                              : "SYS\$COMMON:[SSL]" -}
-# Where installed engines reside
-ENGINESDIR={- $osslprefix -}ENGINES:
-
-CC= {- $target{cc} -}
-CFLAGS= /DEFINE=({- join(",", @{$config{defines}},"OPENSSLDIR=\"\"\"\$(OPENSSLDIR)\"\"\"","ENGINESDIR=\"\"\"\$(ENGINESDIR)\"\"\"") -}) {- $config{cflags} -}
-DEPFLAG= /DEFINE=({- join(",", @{$config{depdefines}}) -})
-LDFLAGS= {- $config{lflags} -}
-EX_LIBS= {- $config{ex_libs} ? ",".$config{ex_libs} : "" -}
-
-PERL={- $config{perl} -}
-
-# We let the C compiler driver to take care of .s files. This is done in
-# order to be excused from maintaining a separate set of architecture
-# dependent assembler flags. E.g. if you throw -mcpu=ultrasparc at SPARC
-# gcc, then the driver will automatically translate it to -xarch=v8plus
-# and pass it down to assembler.
-AS={- $target{as} -}
-ASFLAG={- $target{asflags} -}
-
-# .FIRST and .LAST are special targets with MMS and MMK.
-# The defines in there are for C.  includes that look like
-# this:
-#
-#    #include <openssl/foo.h>
-#    #include "internal/bar.h"
-#
-# will use the logical names to find the files.  Expecting
-# DECompHP C to find files in subdirectories of whatever was
-# given with /INCLUDE is a fantasy, unfortunately.
-NODEBUG=@
-.FIRST :
-        $(NODEBUG) openssl_inc1 = F$PARSE("[.include.openssl]","A.;",,,"syntax_only") - "A.;"
-        $(NODEBUG) openssl_inc2 = F$PARSE("{- catdir($config{sourcedir},"[.include.openssl]") -}","a.;",,,"SYNTAX_ONLY") - "A.;"
-        $(NODEBUG) internal_inc1 = F$PARSE("[.crypto.include.internal]","A.;",,,"SYNTAX_ONLY") - "A.;"
-        $(NODEBUG) internal_inc2 = F$PARSE("{- catdir($config{sourcedir},"[.include.internal]") -}","A.;",,,"SYNTAX_ONLY") - "A.;"
-        $(NODEBUG) internal_inc3 = F$PARSE("{- catdir($config{sourcedir},"[.crypto.include.internal]") -}","A.;",,,"SYNTAX_ONLY") - "A.;"
-        $(NODEBUG) DEFINE openssl 'openssl_inc1','openssl_inc2'
-        $(NODEBUG) DEFINE internal 'internal_inc1','internal_inc2','internal_inc3'
-        $(NODEBUG) staging_dir = "$(DESTDIR)"
-        $(NODEBUG) IF staging_dir .NES. "" THEN -
-                staging_dir = F$PARSE("A.;",staging_dir,"[]",,"SYNTAX_ONLY") - "A.;"
-        $(NODEBUG) !
-        $(NODEBUG) ! Installation logical names
-        $(NODEBUG) !
-        $(NODEBUG) installtop_dev = F$PARSE(staging_dir,"$(INSTALLTOP)",,"DEVICE","SYNTAX_ONLY")
-        $(NODEBUG) ! Because there are no routines to merge directories, we have to
-        $(NODEBUG) ! do it ourselves
-        $(NODEBUG) IF staging_dir .NES. "" THEN -
-                staging_dir = F$PARSE(staging_dir,"[000000]",,"DIRECTORY","SYNTAX_ONLY")
-        $(NODEBUG) installtop_dir = F$PARSE("$(INSTALLTOP)","[000000]",,"DIRECTORY","SYNTAX_ONLY")
-        $(NODEBUG) IF staging_dir .NES. "" .AND. staging_dir .NES. "[000000]" THEN -
-                installtop_dir = staging_dir - "]" + "." + (installtop_dir - "[")
-        $(NODEBUG) installtop_dir = installtop_dir - "]" + ".]"
-        $(NODEBUG) DEFINE ossl_installroot 'installtop_dev''installtop_dir'
-        $(NODEBUG) !
-        $(NODEBUG) datatop = F$PARSE("$(OPENSSLDIR)","[000000]A.;",,,"SYNTAX_ONLY") -
-                - "]A.;" + ".]"
-        $(NODEBUG) IF "$(DESTDIR)" .EQS. "" THEN -
-                DEFINE ossl_dataroot 'datatop'
-        $(NODEBUG) !
-        $(NODEBUG) ! Figure out the architecture
-        $(NODEBUG) !
-        $(NODEBUG) arch == f$edit( f$getsyi( "arch_name"), "upcase")
-        $(NODEBUG) !
-        $(NODEBUG) ! Set up logical names for the libraries, so LINK and
-        $(NODEBUG) ! running programs can use them.
-        $(NODEBUG) !
-        $(NODEBUG) {- join("\n\t\$(NODEBUG) ", map { "DEFINE ".uc($_)." 'F\$ENV(\"DEFAULT\")'".uc($_)."\$(SHLIB_EXT)" } map { $unified_info{sharednames}->{$_} || () } @{$unified_info{libraries}}) || "!" -}
-
-.LAST :
-        $(NODEBUG) {- join("\n\t\$(NODEBUG) ", map { "DEASSIGN ".uc($_) } map { $unified_info{sharednames}->{$_} || () } @{$unified_info{libraries}}) || "!" -}
-        $(NODEBUG) IF "$(DESTDIR)" .EQS. "" THEN DEASSIGN ossl_dataroot
-        $(NODEBUG) DEASSIGN ossl_installroot
-        $(NODEBUG) DEASSIGN internal
-        $(NODEBUG) DEASSIGN openssl
-.DEFAULT :
-        @ ! MMS cannot handle no actions...
-
-# The main targets ###################################################
-
-all : descrip.mms, build_libs, build_engines, build_apps
-
-build_libs : $(LIBS)
-build_engines : $(ENGINES)
-build_apps : $(PROGRAMS), $(SCRIPTS)
-build_tests : $(TESTPROGS)
-
-test tests : build_apps, build_engines, build_tests, rehash
-        SET DEFAULT [.test]{- move("test") -}
-        DEFINE SRCTOP {- sourcedir() -}
-        DEFINE BLDTOP {- builddir() -}
-        $(PERL) {- sourcefile("test", "run_tests.pl") -} $(TESTS)
-        DEASSIGN BLDTOP
-        DEASSIGN SRCTOP
-        SET DEFAULT [-]{- move("..") -}
-
-list-tests :
-        @ TOP=$(SRCDIR) PERL=$(PERL) $(PERL) {- catfile($config{sourcedir},"test", "run_tests.pl") -} list
-
-# Because VMS wants the generation number (or *) to delete files, we can't
-# use $(LIBS), $(PROGRAMS) and $(TESTPROGS) directly.
-libclean :
-        - DELETE []OSSL$LIB*.OLB;*,OSSL$LIB*.LIS;*
-        - DELETE [.crypto...]*.OBJ;*,*.LIS;*
-        - DELETE [.ssl...]*.OBJ;*,*.LIS;*
-        - DELETE [.engines...]*.OBJ;*,*.LIS;*
-        - DELETE []CXX$DEMANGLER_DB.;*
-
-install : install_sw install_docs
-
-uninstall : uninstall_docs uninstall_sw
-
-clean : libclean
-        - DELETE []OSSL$LIB*.EXE;*,OSSL$LIB*.MAP;*,OSSL$LIB*.OPT;*
-        - DELETE [.engines...]LIB*.EXE;*,LIB*.MAP;*,LIB*.OPT;*
-        - DELETE [.apps]*.EXE;*,*.MAP;*,*.OPT;*
-        - DELETE [.apps]*.OBJ;*,*.LIS;*
-        - DELETE [.test]*.EXE;*,*.MAP;*,*.OPT;*
-        - DELETE [.test]*.OBJ;*,*.LIS;*
-        - DELETE [.test]*.LOG;*
-        - DELETE []*.MAP;*
-
-DCLEAN_CMD=$(PERL) -pe "if (/^# DO NOT DELETE.*/) { exit(0); }"
-dclean :
-        $(DCLEAN_CMD) < descrip.mms > descrip.mms.new
-        RENAME descrip.mms.new descrip.mms
-        PURGE descrip.mms
-
-{- our @deps = map { (my $x = $_) =~ s|\.o$|\$(DEP_EXT)|; $x; }
-               grep { $unified_info{sources}->{$_}->[0] =~ /\.c$/ }
-               keys %{$unified_info{sources}};
-   ""; -}
-depend : {- join(",-\n\t", @deps); -}
-        $(DCLEAN_CMD) < descrip.mms > descrip.mms.new
-        OPEN/APPEND DESCRIP descrip.mms.new
-        WRITE DESCRIP "# DO NOT DELETE THIS LINE -- make depend depends on it."
-        {- join("\n\t", map { "TYPE $_ /OUTPUT=DESCRIP:" } @deps); -}
-        CLOSE DESCRIP
-        RENAME descrip.mms.new descrip.mms
-        PURGE descrip.mms
-
-# Install helper targets #############################################
-
-install_sw : all install_dev install_engines install_runtime install_config
-        @ WRITE SYS$OUTPUT ""
-        @ WRITE SYS$OUTPUT "######################################################################"
-        @ WRITE SYS$OUTPUT ""
-        @ WRITE SYS$OUTPUT "Installation complete"
-        @ WRITE SYS$OUTPUT ""
-        @ IF "$(DESTDIR)" .NES. "" THEN EXIT 1
-        @ WRITE SYS$OUTPUT "Run @$(INSTALLTOP)openssl_startup to set up logical names"
-        @ WRITE SYS$OUTPUT "then run @$(INSTALLTOP)openssl_setup to define commands"
-        @ WRITE SYS$OUTPUT ""
-
-uninstall_sw : uninstall_dev uninstall_engines uninstall_runtime uninstall_config
-
-install_docs : install_man_docs install_html_docs
-
-uninstall_docs : uninstall_man_docs uninstall_html_docs
-
-install_dev : check_INSTALLTOP
-        @ WRITE SYS$OUTPUT "*** Installing development files"
-        @ ! Install header files
-        CREATE/DIR ossl_installroot:[include.openssl]
-        COPY/PROT=W:R openssl:*.h ossl_installroot:[include.openssl]
-        @ ! Install libraries
-        CREATE/DIR ossl_installroot:['arch'.LIB]
-        {- join("\n        ",
-                map { "COPY/PROT=W:R $_.OLB ossl_installroot:['arch'.LIB]" }
-                @{$unified_info{libraries}}) -}
-        @ {- output_off() if $config{no_shared}; "" -} !
-        {- join("\n        ",
-                map { "COPY/PROT=W:RE $_.EXE ossl_installroot:['arch'.LIB]" }
-                map { $unified_info{sharednames}->{$_} || () }
-                @{$unified_info{libraries}}) -}
-        @ {- output_on() if $config{no_shared}; "" -} !
-
-install_runtime : check_INSTALLTOP
-        @ WRITE SYS$OUTPUT "*** Installing runtime files"
-        @ ! Install the main program
-        CREATE/DIR ossl_installroot:['arch'.EXE]
-        COPY/PROT=W:RE [.APPS]openssl.EXE ossl_installroot:['arch'.EXE]
-        @ ! Install scripts
-        CREATE/DIR ossl_installroot:[EXE]
-        COPY/PROT=W:RE [.APPS]CA.pl ossl_installroot:[EXE]
-        COPY/PROT=W:RE [.TOOLS]c_rehash. ossl_installroot:[EXE]c_rehash.pl
-        @ ! Install configuration file
-        COPY/PROT=W:RE {- sourcefile("apps", "openssl-vms.cnf") -} -
-                ossl_installroot:[000000]openssl.cnf
-
-install_engines : check_INSTALLTOP
-        @ {- output_off() if $config{no_shared}; "" -} !
-        @ WRITE SYS$OUTPUT "*** Installing engines"
-        CREATE/DIR ossl_installroot:['arch'.ENGINES]
-        COPY/PROT=W:RE [.ENGINES]*.EXE ossl_installroot:['arch'.ENGINES]
-        @ {- output_on() if $config{no_shared}; "" -} !
-
-install_config : [.VMS]openssl_startup.com [.VMS]openssl_shutdown.com -
-                 check_INSTALLTOP
-        IF "$(DESTDIR)" .EQS. "" THEN -
-                IF F$SEARCH("OSSL_DATAROOT:[000000]CERTS.DIR;1") .EQS. "" THEN -
-                CREATE/DIR/PROT=(S:RWED,O:RWE,G:RE,W:RE) OSSL_DATAROOT:[CERTS]
-        IF "$(DESTDIR)" .EQS. "" THEN -
-                IF F$SEARCH("OSSL_DATAROOT:[000000]PRIVATE.DIR;1") .EQS. "" THEN -
-                CREATE/DIR/PROT=(S:RWED,O:RWE,G:,W:) OSSL_DATAROOT:[PRIVATE]
-        CREATE/DIR ossl_installroot:[SYS$STARTUP]
-        COPY/PROT=W:RE -
-                [.VMS]openssl_startup.com,openssl_shutdown.com -
-                ossl_installroot:[SYS$STARTUP]
-        COPY/PROT=W:RE -
-                {- sourcefile("VMS", "openssl_utils.com") -} -
-                ossl_installroot:[SYS$STARTUP]
-
-[.VMS]openssl_startup.com : vmsconfig.pm
-        CREATE/DIR [.VMS]
-        $(PERL) "-I." "-Mvmsconfig" {- sourcefile("util", "dofile.pl") -} -
-                {- sourcefile("VMS", "openssl_startup.com.in") -} -
-                > [.VMS]openssl_startup.com
-
-[.VMS]openssl_shutdown.com : vmsconfig.pm
-        CREATE/DIR [.VMS]
-        $(PERL) "-I." "-Mvmsconfig" {- sourcefile("util", "dofile.pl") -} -
-                {- sourcefile("VMS", "openssl_shutdown.com.in") -} -
-                > [.VMS]openssl_shutdown.com
-
-vmsconfig.pm : descrip.mms
-        OPEN/WRITE/SHARE=READ CONFIG []vmsconfig.pm
-        WRITE CONFIG "package vmsconfig;"
-        WRITE CONFIG "use strict; use warnings;"
-        WRITE CONFIG "use Exporter;"
-        WRITE CONFIG "our @ISA = qw(Exporter);"
-        WRITE CONFIG "our @EXPORT = qw(%config %target %withargs %unified_info);"
-        WRITE CONFIG "our %config = ("
-        WRITE CONFIG "  target => '{- $config{target} -}',"
-        WRITE CONFIG "  version => '$(MAJOR).$(MINOR)',"
-        WRITE CONFIG "  no_shared => '","{- $config{no_shared} -}","',"
-        WRITE CONFIG "  INSTALLTOP => '$(INSTALLTOP)',"
-        WRITE CONFIG "  OPENSSLDIR => '$(OPENSSLDIR)',"
-        WRITE CONFIG "  pointersize => '","{- $target{pointersize} -}","',"
-        WRITE CONFIG "  shared_libs => ["
-        {- join("\n        ", map { "WRITE CONFIG \"    '$_'," } map { $unified_info{sharednames}->{$_} || () } @{$unified_info{libraries}}) || "\@ !" -}
-        WRITE CONFIG "  ],"
-        WRITE CONFIG ");"
-        WRITE CONFIG "our %target = ();"
-        WRITE CONFIG "our %withargs = ();"
-        WRITE CONFIG "our %unified_info = ();"
-        WRITE CONFIG "1;"
-        CLOSE CONFIG
-
-check_INSTALLTOP :
-        @ IF "$(INSTALLTOP)" .EQS. "" THEN -
-                WRITE SYS$ERROR "INSTALLTOP should not be empty"
-        @ IF "$(INSTALLTOP)" .EQS. "" THEN -
-                EXIT %x10000002
-
-# Helper targets #####################################################
-
-rehash : [.apps]openssl.exe, copy-certs
-        !MCR [.apps]openssl.exe rehash {- builddir("certs", "demo") -}
-        $(PERL) [.tools]c_rehash. [.certs.demo]
-
-copy-certs :
-        @ IF F$SEARCH("{- buildfile("certs.dir") -}") .EQS. "" THEN -
-             CREATE/DIR {- builddir("certs") -}
-        -@ IF "{- sourcedir("certs") -}" .NES. "{- builddir("certs") -}" THEN -
-             COPY {- tree(sourcedir("certs")) -}*.* {- tree(builddir("certs")) -}
-
-# Developer targets ##################################################
-
-debug_logicals :
-        SH LOGICAL/PROC openssl,internal,ossl_installroot
-        IF "$(DESTDIR)" .EQS. "" THEN -
-                SH LOGICAL/PROC ossl_dataroot
-
-# Building targets ###################################################
-
-descrip.mms : {- sourcefile("Configurations", "descrip.mms.tmpl") -} $(SRCDIR)Configure ! $(SRCDIR)config.com
-        @ WRITE SYS$OUTPUT "descrip.mms is older than $?."
-        @ WRITE SYS$OUTPUT "Reconfiguring..."
-        perl $(SRCDIR)Configure reconf
-        @ WRITE SYS$OUTPUT "*************************************************"
-        @ WRITE SYS$OUTPUT "***                                           ***"
-        @ WRITE SYS$OUTPUT "***   Please run the same mms command again   ***"
-        @ WRITE SYS$OUTPUT "***                                           ***"
-        @ WRITE SYS$OUTPUT "*************************************************"
-        @ exit %10000000
-
-{-
-  use File::Basename;
-  use File::Spec::Functions qw/abs2rel rel2abs catfile catdir/;
-  sub src2dep {
-      my %args = @_;
-      my $dep = $args{obj};
-      my $deps = join(", -\n\t\t", @{$args{srcs}}, @{$args{deps}});
-
-      # Because VMS C isn't very good at combining a /INCLUDE path with
-      # #includes having a relative directory (like '#include "../foo.h"),
-      # the best choice is to move to the first source file's intended
-      # directory before compiling, and make sure to write the object file
-      # in the correct position (important when the object tree is other
-      # than the source tree).
-      my $forward = dirname($args{srcs}->[0]);
-      my $backward = abs2rel(rel2abs("."), rel2abs($forward));
-      my $depd = abs2rel(rel2abs(dirname($dep)), rel2abs($forward));
-      my $depn = basename($dep);
-      my $srcs =
-          join(", ",
-               map { abs2rel(rel2abs($_), rel2abs($forward)) } @{$args{srcs}});
-      my $incs =
-          "/INCLUDE=(".join(",",
-                            map {
-                               file_name_is_absolute($_)
-                               ? $_ : catdir($backward,$_)
-                            } @{$args{incs}}).")";
-      my $before = $unified_info{before}->{$dep.".OBJ"} || "\@ !";
-      my $after = $unified_info{after}->{$dep.".OBJ"} || "\@ !";
-
-      return <<"EOF";
-$dep.MMS : $deps
-        ${before}
-        SET DEFAULT $forward
-        \$(CC) \$(CFLAGS)${incs} /MMS=(TARGET=.OBJ)/OBJECT=${depd}${depn}.MMS $srcs
-        SET DEFAULT $backward
-        ${after}
-        - PURGE $dep.MMS
-EOF
-  }
-  sub src2obj {
-      my %args = @_;
-      my $obj = $args{obj};
-      my $deps = join(", -\n\t\t", @{$args{srcs}}, @{$args{deps}});
-
-      # Because VMS C isn't very good at combining a /INCLUDE path with
-      # #includes having a relative directory (like '#include "../foo.h"),
-      # the best choice is to move to the first source file's intended
-      # directory before compiling, and make sure to write the object file
-      # in the correct position (important when the object tree is other
-      # than the source tree).
-      my $forward = dirname($args{srcs}->[0]);
-      my $backward = abs2rel(rel2abs("."), rel2abs($forward));
-      my $objd = abs2rel(rel2abs(dirname($obj)), rel2abs($forward));
-      my $objn = basename($obj);
-      my $srcs =
-          join(", ",
-               map { abs2rel(rel2abs($_), rel2abs($forward)) } @{$args{srcs}});
-      my $incs =
-          "/INCLUDE=(".join(",",
-                            map {
-                               file_name_is_absolute($_)
-                               ? $_ : catdir($backward,$_)
-                            } @{$args{incs}}).")";
-      my $before = $unified_info{before}->{$obj.".OBJ"} || "\@ !";
-      my $after = $unified_info{after}->{$obj.".OBJ"} || "\@ !";
-
-      return <<"EOF";
-$obj.OBJ : $deps
-        ${before}
-        SET DEFAULT $forward
-        \$(CC) \$(CFLAGS)${incs} /OBJECT=${objd}${objn}.OBJ /REPOSITORY=$backward $srcs
-        SET DEFAULT $backward
-        ${after}
-        - PURGE $obj.OBJ
-EOF
-  }
-  sub libobj2shlib {
-      my %args = @_;
-      my $lib = $args{lib};
-      my $shlib = $args{shlib};
-      my $libd = dirname($lib);
-      my $libn = basename($lib);
-      (my $mkdef_key = $libn) =~ s/^${osslprefix_q}lib//i;
-      my @deps = map {
-          $config{no_shared} ? $_.".OLB"
-              : $unified_info{sharednames}->{$_}.".EXE"; } @{$args{deps}};
-      my $deps = join(", -\n\t\t", @deps);
-      my $shlib_target = $config{no_shared} ? "" : $target{shared_target};
-      my $ordinalsfile = defined($args{ordinals}) ? $args{ordinals}->[1] : "";
-      my $engine_opt = abs2rel(rel2abs(catfile($config{sourcedir},
-                                               "VMS", "engine.opt")),
-                               rel2abs($config{builddir}));
-      my $mkdef_pl = abs2rel(rel2abs(catfile($config{sourcedir},
-                                             "util", "mkdef.pl")),
-                             rel2abs($config{builddir}));
-      my $translatesyms_pl = abs2rel(rel2abs(catfile($config{sourcedir},
-                                                     "VMS", "translatesyms.pl")),
-                                     rel2abs($config{builddir}));
-      # The "[]" hack is because in .OPT files, each line inherits the
-      # previous line's file spec as default, so if no directory spec
-      # is present in the current line and the previous line has one that
-      # doesn't apply, you're in for a surprise.
-      my $write_opt =
-          join("\n\t", map { my $x = $_ =~ /\[/ ? $_ : "[]".$_;
-                             $x =~ s|(\.EXE)|$1/SHARE|;
-                             $x =~ s|(\.LIB)|$1/LIB|;
-                             "WRITE OPT_FILE \"$x\"" } @deps)
-          || "\@ !";
-      return <<"EOF";
-$shlib.EXE : $lib.OLB $deps $ordinalsfile
-        IF "$mkdef_key" .EQS. "ssl" .OR. "$mkdef_key" .EQS. "crypto" THEN -
-           \$(PERL) $mkdef_pl "$mkdef_key" "VMS" > $shlib.SYMVEC-tmp
-        IF "$mkdef_key" .EQS. "ssl" .OR. "$mkdef_key" .EQS. "crypto" THEN -
-           \$(PERL) $translatesyms_pl \$(BUILDDIR)CXX\$DEMANGLER_DB. < $shlib.SYMVEC-tmp > $shlib.SYMVEC
-        OPEN/WRITE/SHARE=READ OPT_FILE $shlib.OPT
-        WRITE OPT_FILE "IDENTIFICATION=""V$config{version}"""
-        IF "$mkdef_key" .NES. "ssl" .AND. "$mkdef_key" .NES. "crypto" THEN -
-           TYPE $engine_opt /OUTPUT=OPT_FILE:
-        IF "$mkdef_key" .EQS. "ssl" .OR. "$mkdef_key" .EQS. "crypto" THEN -
-           TYPE $shlib.SYMVEC /OUTPUT=OPT_FILE:
-        WRITE OPT_FILE "$lib.OLB/LIBRARY"
-        $write_opt ! Comment to protect from empty line
-        CLOSE OPT_FILE
-        LINK /MAP=$shlib.MAP /FULL/SHARE=$shlib.EXE $shlib.OPT/OPT \$(EX_LIBS)
-        - DELETE $shlib.SYMVEC;*
-        - PURGE $shlib.EXE,$shlib.OPT,$shlib.MAP
-EOF
-  }
-  sub obj2dynlib {
-      my %args = @_;
-      my $lib = $args{lib};
-      my $libd = dirname($lib);
-      my $libn = basename($lib);
-      (my $libn_nolib = $libn) =~ s/^lib//;
-      my @objs = map { "$_.OBJ" } @{$args{objs}};
-      my @deps = map {
-          $config{no_shared} ? $_.".OLB"
-              : $unified_info{sharednames}->{$_}.".EXE"; } @{$args{deps}};
-      my $deps = join(", -\n\t\t", @objs, @deps);
-      my $shlib_target = $config{no_shared} ? "" : $target{shared_target};
-      my $engine_opt = abs2rel(rel2abs(catfile($config{sourcedir},
-                                               "VMS", "engine.opt")),
-                               rel2abs($config{builddir}));
-      # The "[]" hack is because in .OPT files, each line inherits the
-      # previous line's file spec as default, so if no directory spec
-      # is present in the current line and the previous line has one that
-      # doesn't apply, you're in for a surprise.
-      my $write_opt =
-          join(",-\"\n\t", map { my $x = $_ =~ /\[/ ? $_ : "[]".$_;
-                                 "WRITE OPT_FILE \"$x" } @objs).
-          "\"\n\t".
-          join("\n\t", map { my $x = $_ =~ /\[/ ? $_ : "[]".$_;
-                             $x =~ s|(\.EXE)|$1/SHARE|;
-                             $x =~ s|(\.LIB)|$1/LIB|;
-                             "WRITE OPT_FILE \"$x\"" } @deps)
-          || "\@ !";
-      return <<"EOF";
-$lib.EXE : $deps
-        OPEN/WRITE/SHARE=READ OPT_FILE $lib.OPT
-        TYPE $engine_opt /OUTPUT=OPT_FILE:
-        $write_opt
-        CLOSE OPT_FILE
-        LINK /MAP=$lib.MAP /FULL/SHARE=$lib.EXE $lib.OPT/OPT \$(EX_LIBS)
-        - PURGE $lib.EXE,$lib.OPT,$lib.MAP
-EOF
-  }
-  sub obj2lib {
-      my %args = @_;
-      my $lib = $args{lib};
-      my $objs = join(", -\n\t\t", map { $_.".OBJ" } (@{$args{objs}}));
-      my $fill_lib = join("\n\t", (map { "LIBRARY/REPLACE $lib.OLB $_.OBJ" }
-                                    @{$args{objs}}));
-      return <<"EOF";
-$lib.OLB : $objs
-        LIBRARY/CREATE/OBJECT $lib
-        $fill_lib
-        - PURGE $lib.OLB
-EOF
-  }
-  sub obj2bin {
-      my %args = @_;
-      my $bin = $args{bin};
-      my $bind = dirname($bin);
-      my $binn = basename($bin);
-      my @objs = map { "$_.OBJ" } @{$args{objs}};
-      my @deps = map {
-          $config{no_shared} ? $_.".OLB"
-              : $unified_info{sharednames}->{$_}.".EXE"; } @{$args{deps}};
-      my $deps = join(", -\n\t\t", @objs, @deps);
-      # The "[]" hack is because in .OPT files, each line inherits the
-      # previous line's file spec as default, so if no directory spec
-      # is present in the current line and the previous line has one that
-      # doesn't apply, you're in for a surprise.
-      my $write_opt =
-          join(",-\"\n\t", map { my $x = $_ =~ /\[/ ? $_ : "[]".$_;
-                                 "WRITE OPT_FILE \"$x" } @objs).
-          "\"\n\t".
-          join("\n\t", map { my $x = $_ =~ /\[/ ? $_ : "[]".$_;
-                             $x =~ s|(\.EXE)|$1/SHARE|;
-                             $x =~ s|(\.OLB)|$1/LIB|;
-                             "WRITE OPT_FILE \"$x\"" } @deps)
-          || "\@ !";
-      return <<"EOF";
-$bin.EXE : $deps
-        OPEN/WRITE/SHARE=READ OPT_FILE $bin.OPT
-        $write_opt
-        CLOSE OPT_FILE
-        LINK/EXEC=$bin.EXE \$(LDFLAGS) $bin.OPT/OPT \$(EX_LIBS)
-        - PURGE $bin.EXE,$bin.OPT
-EOF
-  }
-  sub in2script {
-      my %args = @_;
-      my $script = $args{script};
-      return "" if grep { $_ eq $script } @{$args{sources}}; # No overwrite!
-      my $sources = join(" ", @{$args{sources}});
-      my $dofile = abs2rel(rel2abs(catfile($config{sourcedir},
-                                           "util", "dofile.pl")),
-                           rel2abs($config{builddir}));
-      return <<"EOF";
-$script : $sources
-        \$(PERL) "-I\$(BUILDDIR)" "-Mconfigdata" $dofile -
-	    "-o$target{build_file}" $sources > $script
-        SET FILE/PROT=(S:RWED,O:RWED,G:RE,W:RE) $script
-        PURGE $script
-EOF
-  }
-  ""    # Important!  This becomes part of the template result.
--}

Configurations/unix-Makefile.tmpl

@@ -1,894 +0,0 @@
-##
-## Makefile for OpenSSL
-##
-## {- join("\n## ", @autowarntext) -}
-{-
-     sub windowsdll { $config{target} =~ /^(?:Cygwin|mingw)/ }
-     sub shlib_ext { $target{shared_extension} || ".so" }
-     sub shlib_ext_simple { (my $x = $target{shared_extension})
-                                =~ s/\.\$\(SHLIB_MAJOR\)\.\$\(SHLIB_MINOR\)//;
-                            $x }
--}
-PLATFORM={- $config{target} -}
-OPTIONS={- $config{options} -}
-CONFIGURE_ARGS=({- join(", ",quotify_l(@{$config{perlargv}})) -})
-SRCDIR={- $config{sourcedir} -}
-BLDDIR={- $config{builddir} -}
-
-VERSION={- $config{version} -}
-MAJOR={- $config{major} -}
-MINOR={- $config{minor} -}
-SHLIB_VERSION_NUMBER={- $config{shlib_version_number} -}
-SHLIB_VERSION_HISTORY={- $config{shlib_version_history} -}
-SHLIB_MAJOR={- $config{shlib_major} -}
-SHLIB_MINOR={- $config{shlib_minor} -}
-SHLIB_TARGET={- $target{shared_target} -}
-
-EXE_EXT={- $target{exe_extension} || "" -}
-LIB_EXT={- $target{lib_extension} || ".a" -}
-SHLIB_EXT={- shlib_ext() -}
-SHLIB_EXT_SIMPLE={- shlib_ext_simple() -}
-OBJ_EXT={- $target{obj_extension} || ".o" -}
-DEP_EXT={- $target{dep_extension} || ".d" -}
-
-LIBS={- join(" ", map { $_."\$(LIB_EXT)" } @{$unified_info{libraries}}) -}
-SHLIBS={- join(" ", map { $_."\$(SHLIB_EXT)" } map { $unified_info{sharednames}->{$_} || () } @{$unified_info{libraries}}) -}
-ENGINES={- join(" ", map { $_."\$(SHLIB_EXT_SIMPLE)" } @{$unified_info{engines}}) -}
-PROGRAMS={- join(" ", map { $_."\$(EXE_EXT)" } grep { !m|^test/| } @{$unified_info{programs}}) -}
-TESTPROGS={- join(" ", map { $_."\$(EXE_EXT)" } grep { m|^test/| } @{$unified_info{programs}}) -}
-SCRIPTS={- join(" ", @{$unified_info{scripts}}) -}
-BIN_SCRIPTS=$(BLDDIR)/tools/c_rehash
-MISC_SCRIPTS=$(SRCDIR)/tools/c_hash $(SRCDIR)/tools/c_info \
-	     $(SRCDIR)/tools/c_issuer $(SRCDIR)/tools/c_name \
-	     $(BLDDIR)/apps/CA.pl $(SRCDIR)/apps/tsget
-
-# DESTDIR is for package builders so that they can configure for, say,
-# /usr/ and yet have everything installed to /tmp/somedir/usr/.
-# Normally it is left empty.
-DESTDIR=
-
-# Do not edit these manually. Use Configure with --prefix or --openssldir
-# to change this!  Short explanation in the top comment in Configure
-INSTALLTOP={- # $prefix is used in the OPENSSLDIR perl snippet
-	      #
-	      our $prefix = $config{prefix} || "/usr/local";
-              $prefix -}
-OPENSSLDIR={- #
-	      # The logic here is that if no --openssldir was given,
-	      # OPENSSLDIR will get the value from $prefix plus "/ssl".
-	      # If --openssldir was given and the value is an absolute
-	      # path, OPENSSLDIR will get its value without change.
-	      # If the value from --openssldir is a relative path,
-	      # OPENSSLDIR will get $prefix with the --openssldir
-	      # value appended as a subdirectory.
-	      #
-              use File::Spec::Functions;
-              our $openssldir =
-                  $config{openssldir} ?
-                      (file_name_is_absolute($config{openssldir}) ?
-                           $config{openssldir}
-                           : catdir($prefix, $config{openssldir}))
-                      : catdir($prefix, "ssl");
-              $openssldir -}
-LIBDIR={- #
-          # if $prefix/lib$target{multilib} is not an existing
-          # directory, then assume that it's not searched by linker
-          # automatically, in which case adding $target{multilib} suffix
-          # causes more grief than we're ready to tolerate, so don't...
-          our $multilib =
-              -d "$prefix/lib$target{multilib}" ? $target{multilib} : "";
-          our $libdir = $config{libdir} || "lib$multilib";
-          $libdir -}
-ENGINESDIR={- use File::Spec::Functions;
-              catdir($prefix,$libdir,"engines") -}
-
-MANDIR=$(INSTALLTOP)/share/man
-HTMLDIR=$(INSTALLTOP)/share/doc/$(BASENAME)/html
-
-# MANSUFFIX is for the benefit of anyone who may want to have a suffix
-# appended after the manpage file section number.  "ssl" is popular,
-# resulting in files such as config.5ssl rather than config.5.
-MANSUFFIX=
-HTMLSUFFIX=html
-
-
-
-CROSS_COMPILE= {- $config{cross_compile_prefix} -}
-CC= $(CROSS_COMPILE){- $target{cc} -}
-CFLAGS={- our $cflags2 = join(" ",(map { "-D".$_} @{$config{defines}}),"-DOPENSSLDIR=\"\\\"\$(OPENSSLDIR)\\\"\"","-DENGINESDIR=\"\\\"\$(ENGINESDIR)\\\"\"") -} {- $config{cflags} -}
-CFLAGS_Q={- $cflags2 =~ s|([\\"])|\\$1|g; $cflags2 -} {- $config{cflags} -}
-DEPFLAGS= {- join(" ",map { "-D".$_} @{$config{depdefines}}) -}
-LDFLAGS= {- $config{lflags} -}
-PLIB_LDFLAGS= {- $config{plib_lflags} -}
-EX_LIBS= {- $config{ex_libs} -}
-SHARED_LDFLAGS={- $target{shared_ldflag}
-                  # Unlike other OSes (like Solaris, Linux, Tru64,
-                  # IRIX) BSD run-time linkers (tested OpenBSD, NetBSD
-                  # and FreeBSD) "demand" RPATH set on .so objects.
-                  # Apparently application RPATH is not global and
-                  # does not apply to .so linked with other .so.
-                  # Problem manifests itself when libssl.so fails to
-                  # load libcrypto.so. One can argue that we should
-                  # engrave this into Makefile.shared rules or into
-                  # BSD-* config lines above. Meanwhile let's try to
-                  # be cautious and pass -rpath to linker only when
-                  # $prefix is not /usr.
-                  . ($config{target} =~ m|^BSD-| && $prefix !~ m|^/usr/.*$|
-                     ? " -Wl,-rpath,\$\$(LIBRPATH)" : "") -}
-SHARED_RCFLAGS={- $target{shared_rcflag} -}
-
-PERL={- $config{perl} -}
-
-ARFLAGS= {- $target{arflags} -}
-AR=$(CROSS_COMPILE){- $target{ar} || "ar" -} $(ARFLAGS) r
-RANLIB= {- $target{ranlib} -}
-NM= $(CROSS_COMPILE){- $target{nm} || "nm" -}
-RM= rm -f
-TAR= {- $target{tar} || "tar" -}
-TARFLAGS= {- $target{tarflags} -}
-
-BASENAME=       openssl
-NAME=           $(BASENAME)-$(VERSION)
-TARFILE=        ../$(NAME).tar
-
-# We let the C compiler driver to take care of .s files. This is done in
-# order to be excused from maintaining a separate set of architecture
-# dependent assembler flags. E.g. if you throw -mcpu=ultrasparc at SPARC
-# gcc, then the driver will automatically translate it to -xarch=v8plus
-# and pass it down to assembler.
-AS=$(CC) -c
-ASFLAG=$(CFLAGS)
-PERLASM_SCHEME= {- $target{perlasm_scheme} -}
-
-# For x86 assembler: Set PROCESSOR to 386 if you want to support
-# the 80386.
-PROCESSOR= {- $config{processor} -}
-
-# The main targets ###################################################
-
-all: build_libs build_engines build_apps link-utils
-
-# The pkg-config files depend on the libraries as well as Makefile
-build_libs: libcrypto.pc libssl.pc openssl.pc
-build_engines: $(ENGINES)
-build_apps: $(PROGRAMS) $(SCRIPTS)
-build_tests: $(TESTPROGS)
-
-test tests: build_tests build_apps build_engines rehash
-	( cd test; \
-	  SRCTOP=../$(SRCDIR) \
-	  BLDTOP=../$(BLDDIR) \
-	    $(PERL) ../$(SRCDIR)/test/run_tests.pl $(TESTS) )
-
-list-tests:
-	@TOP=$(SRCDIR) PERL=$(PERL) $(PERL) $(SRCDIR)/test/run_tests.pl list
-
-libclean:
-	-rm -f `find $(BLDDIR) -name '*$(LIB_EXT)' -o -name '*$(SHLIB_EXT)'`
-
-install: install_sw install_ssldirs install_docs
-
-uninstall: uninstall_docs uninstall_sw
-
-clean: libclean
-	rm -f $(PROGRAMS) $(TESTPROGS)
-	rm -f `find $(BLDDIR) -name '*$(DEP_EXT)'`
-	rm -f `find $(BLDDIR) -name '*$(OBJ_EXT)'`
-	rm -f $(BLDDIR)/core $(BLDDIR)/rehash.time
-	rm -f $(BLDDIR)/tags $(BLDDIR)/TAGS
-	rm -f $(BLDDIR)/openssl.pc $(BLDDIR)/libcrypto.pc $(BLDDIR)/libssl.pc
-	-rm -f `find $(BLDDIR) -type l`
-	rm -f $(TARFILE)
-
-DCLEAN_CMD=sed -e '/^DO NOT DELETE.*/,$$d'
-dclean:
-	$(DCLEAN_CMD) < Makefile >Makefile.new
-	mv -f Makefile.new Makefile
-
-DEPS={- join(" ", map { (my $x = $_) =~ s|\.o$|\$(DEP_EXT)|; $x; }
-                  grep { $unified_info{sources}->{$_}->[0] =~ /\.c$/ }
-                  keys %{$unified_info{sources}}); -}
-depend: $(DEPS)
-	( $(DCLEAN_CMD) < Makefile; \
-	  echo '# DO NOT DELETE THIS LINE -- make depend depends on it.'; \
-	  echo; \
-	  cat `find . -name '*$(DEP_EXT)'` ) > Makefile.new
-	mv -f Makefile.new Makefile
-
-# Install helper targets #############################################
-
-install_sw: all install_dev install_engines install_runtime
-
-uninstall_sw: uninstall_dev uninstall_engines uninstall_runtime
-
-install_docs: install_man_docs install_html_docs
-
-uninstall_docs: uninstall_man_docs uninstall_html_docs
-
-install_ssldirs:
-	@$(PERL) $(SRCDIR)/util/mkdir-p.pl $(DESTDIR)$(OPENSSLDIR)/certs
-	@$(PERL) $(SRCDIR)/util/mkdir-p.pl $(DESTDIR)$(OPENSSLDIR)/private
-
-install_dev:
-	@[ -n "$(INSTALLTOP)" ] || (echo INSTALLTOP should not be empty; exit 1)
-	@echo "*** Installing development files"
-	@$(PERL) $(SRCDIR)/util/mkdir-p.pl $(DESTDIR)$(INSTALLTOP)/include/openssl
-	@set -e; for i in $(SRCDIR)/include/openssl/*.h \
-			  $(BLDDIR)/include/openssl/*.h; do \
-		fn=`basename $$i`; \
-		echo "install $$i -> $(DESTDIR)$(INSTALLTOP)/include/openssl/$$fn"; \
-		cp $$i $(DESTDIR)$(INSTALLTOP)/include/openssl/$$fn; \
-		chmod 644 $(DESTDIR)$(INSTALLTOP)/include/openssl/$$fn; \
-	done
-	@$(PERL) $(SRCDIR)/util/mkdir-p.pl $(DESTDIR)$(INSTALLTOP)/$(LIBDIR)
-	@set -e; for l in $(LIBS); do \
-		fn=`basename $$l`; \
-		echo "install $$l -> $(DESTDIR)$(INSTALLTOP)/$(LIBDIR)/$$fn"; \
-		cp $$l $(DESTDIR)$(INSTALLTOP)/$(LIBDIR)/$$fn.new; \
-		$(RANLIB) $(DESTDIR)$(INSTALLTOP)/$(LIBDIR)/$$fn.new; \
-		chmod 644 $(DESTDIR)$(INSTALLTOP)/$(LIBDIR)/$$fn.new; \
-		mv -f $(DESTDIR)$(INSTALLTOP)/$(LIBDIR)/$$fn.new \
-		      $(DESTDIR)$(INSTALLTOP)/$(LIBDIR)/$$fn; \
-	done
-	@ : {- output_off() if $config{no_shared}; "" -}
-	@set -e; for s in $(SHLIBS); do \
-		fn=`basename $$s`; \
-		echo "install $$s -> $(DESTDIR)$(INSTALLTOP)/$(LIBDIR)/$$fn"; \
-		cp $$s $(DESTDIR)$(INSTALLTOP)/$(LIBDIR)/$$fn.new; \
-		chmod 644 $(DESTDIR)$(INSTALLTOP)/$(LIBDIR)/$$fn.new; \
-		mv -f $(DESTDIR)$(INSTALLTOP)/$(LIBDIR)/$$fn.new \
-		      $(DESTDIR)$(INSTALLTOP)/$(LIBDIR)/$$fn; \
-		if [ "$(SHLIB_EXT)" != "$(SHLIB_EXT_SIMPLE)" ]; then \
-			echo "link $(DESTDIR)$(INSTALLTOP)/$(LIBDIR)/$$fn2 -> $(DESTDIR)$(INSTALLTOP)/$(LIBDIR)/$$fn"; \
-			fn2=`basename $$fn $(SHLIB_EXT)`$(SHLIB_EXT_SIMPLE); \
-			ln -sf $$fn $(DESTDIR)$(INSTALLTOP)/$(LIBDIR)/$$fn2; \
-		fi; \
-		: {- output_off() unless windowsdll(); "" -}; \
-		echo "install $$s.a -> $(DESTDIR)$(INSTALLTOP)/$(LIBDIR)/$$fn.a"; \
-		cp $$s.a $(DESTDIR)$(INSTALLTOP)/$(LIBDIR)/$$fn.a.new; \
-		chmod 644 $(DESTDIR)$(INSTALLTOP)/$(LIBDIR)/$$fn.a.new; \
-		mv -f $(DESTDIR)$(INSTALLTOP)/$(LIBDIR)/$$fn.a.new \
-		      $(DESTDIR)$(INSTALLTOP)/$(LIBDIR)/$$fn.a; \
-		: {- output_on() unless windowsdll(); "" -}; \
-	done
-	@ : {- output_on() if $config{no_shared}; "" -}
-	@$(PERL) $(SRCDIR)/util/mkdir-p.pl $(DESTDIR)$(INSTALLTOP)/$(LIBDIR)/pkgconfig
-	@echo "install libcrypto.pc -> $(DESTDIR)$(INSTALLTOP)/$(LIBDIR)/pkgconfig/libcrypto.pc"
-	@cp libcrypto.pc $(DESTDIR)$(INSTALLTOP)/$(LIBDIR)/pkgconfig
-	@chmod 644 $(DESTDIR)$(INSTALLTOP)/$(LIBDIR)/pkgconfig/libcrypto.pc
-	@echo "install libssl.pc -> $(DESTDIR)$(INSTALLTOP)/$(LIBDIR)/pkgconfig/libssl.pc"
-	@cp libssl.pc $(DESTDIR)$(INSTALLTOP)/$(LIBDIR)/pkgconfig
-	@chmod 644 $(DESTDIR)$(INSTALLTOP)/$(LIBDIR)/pkgconfig/libssl.pc
-	@echo "install openssl.pc -> $(DESTDIR)$(INSTALLTOP)/$(LIBDIR)/pkgconfig/openssl.pc"
-	@cp openssl.pc $(DESTDIR)$(INSTALLTOP)/$(LIBDIR)/pkgconfig
-	@chmod 644 $(DESTDIR)$(INSTALLTOP)/$(LIBDIR)/pkgconfig/openssl.pc
-
-uninstall_dev:
-	@echo "*** Uninstalling development files"
-	@set -e; for i in $(SRCDIR)/include/openssl/*.h \
-			  $(BLDDIR)/include/openssl/*.h; do \
-		fn=`basename $$i`; \
-		echo "$(RM) $(DESTDIR)$(INSTALLTOP)/include/openssl/$$fn"; \
-		$(RM) $(DESTDIR)$(INSTALLTOP)/include/openssl/$$fn; \
-	done
-	@set -e; for l in $(LIBS); do \
-		fn=`basename $$l`; \
-		echo "$(RM) $(DESTDIR)$(INSTALLTOP)/$(LIBDIR)/$$fn"; \
-		$(RM) $(DESTDIR)$(INSTALLTOP)/$(LIBDIR)/$$fn; \
-	done
-	@set -e; for s in $(SHLIBS); do \
-		fn=`basename $$s`; \
-		if [ "$(SHLIB_EXT)" != "$(SHLIB_EXT_SIMPLE)" ]; then \
-			fn2=`basename $$fn $(SHLIB_EXT)`$(SHLIB_EXT_SIMPLE); \
-			echo "$(RM) $(DESTDIR)$(INSTALLTOP)/$(LIBDIR)/$$fn2"; \
-			$(RM) $(DESTDIR)$(INSTALLTOP)/$(LIBDIR)/$$fn2; \
-		fi; \
-		echo "$(RM) $(DESTDIR)$(INSTALLTOP)/$(LIBDIR)/$$fn"; \
-		$(RM) $(DESTDIR)$(INSTALLTOP)/$(LIBDIR)/$$fn; \
-		: {- output_off() unless windowsdll(); "" -}; \
-		echo "$(RM) $(DESTDIR)$(INSTALLTOP)/$(LIBDIR)/$$fn.a"; \
-		$(RM) $(DESTDIR)$(INSTALLTOP)/$(LIBDIR)/$$fn.a; \
-		: {- output_on() unless windowsdll(); "" -}; \
-	done
-	@echo "$(RM) $(DESTDIR)$(INSTALLTOP)/$(LIBDIR)/pkgconfig/libcrypto.pc"
-	@$(RM) $(DESTDIR)$(INSTALLTOP)/$(LIBDIR)/pkgconfig/libcrypto.pc
-	@echo "$(RM) $(DESTDIR)$(INSTALLTOP)/$(LIBDIR)/pkgconfig/libssl.pc"
-	@$(RM) $(DESTDIR)$(INSTALLTOP)/$(LIBDIR)/pkgconfig/libssl.pc
-	@echo "$(RM) $(DESTDIR)$(INSTALLTOP)/$(LIBDIR)/pkgconfig/openssl.pc"
-	@$(RM) $(DESTDIR)$(INSTALLTOP)/$(LIBDIR)/pkgconfig/openssl.pc
-
-install_engines:
-	@[ -n "$(INSTALLTOP)" ] || (echo INSTALLTOP should not be empty; exit 1)
-	@$(PERL) $(SRCDIR)/util/mkdir-p.pl $(DESTDIR)$(INSTALLTOP)/$(LIBDIR)/engines/
-	@echo "*** Installing engines"
-	@set -e; for e in $(ENGINES); do \
-		fn=`basename $$e`; \
-		echo "install $$e -> $(DESTDIR)$(INSTALLTOP)/bin/$$fn"; \
-		cp $$e $(DESTDIR)$(INSTALLTOP)/$(LIBDIR)/engines/$$fn.new; \
-		chmod 755 $(DESTDIR)$(INSTALLTOP)/$(LIBDIR)/engines/$$fn.new; \
-		mv -f $(DESTDIR)$(INSTALLTOP)/$(LIBDIR)/engines/$$fn.new \
-		      $(DESTDIR)$(INSTALLTOP)/$(LIBDIR)/engines/$$fn; \
-	done
-
-uninstall_engines:
-	@echo "*** Uninstalling engines"
-	@set -e; for e in $(ENGINES); do \
-		fn=`basename $$e`; \
-		echo "$(RM) $(DESTDIR)$(INSTALLTOP)/bin/$$fn"; \
-		$(RM) $(DESTDIR)$(INSTALLTOP)/$(LIBDIR)/engines/$$fn; \
-	done
-
-install_runtime:
-	@[ -n "$(INSTALLTOP)" ] || (echo INSTALLTOP should not be empty; exit 1)
-	@$(PERL) $(SRCDIR)/util/mkdir-p.pl $(DESTDIR)$(INSTALLTOP)/bin
-	@$(PERL) $(SRCDIR)/util/mkdir-p.pl $(DESTDIR)$(OPENSSLDIR)/misc
-	@echo "*** Installing runtime files"
-	: {- output_off() unless windowsdll(); "" -};
-	@set -e; for s in $(SHLIBS); do \
-		fn=`basename $$i`; \
-		echo "install $$s -> $(DESTDIR)$(INSTALLTOP)/bin/$$fn"; \
-		cp $$s $(DESTDIR)$(INSTALLTOP)/bin/$$fn.new; \
-		chmod 644 $(DESTDIR)$(INSTALLTOP)/bin/$$fn.new; \
-		mv -f $(DESTDIR)$(INSTALLTOP)/bin/$$fn.new \
-		      $(DESTDIR)$(INSTALLTOP)/bin/$$fn; \
-	done
-	: {- output_on() unless windowsdll(); "" -};
-	@set -e; for x in $(PROGRAMS); do \
-		fn=`basename $$x`; \
-		echo "install $$x -> $(DESTDIR)$(INSTALLTOP)/bin/$$fn"; \
-		cp $$x $(DESTDIR)$(INSTALLTOP)/bin/$$fn.new; \
-		chmod 755 $(DESTDIR)$(INSTALLTOP)/bin/$$fn.new; \
-		mv -f $(DESTDIR)$(INSTALLTOP)/bin/$$fn.new \
-		      $(DESTDIR)$(INSTALLTOP)/bin/$$fn; \
-	done
-	@set -e; for x in $(BIN_SCRIPTS); do \
-		fn=`basename $$x`; \
-		echo "install $$x -> $(DESTDIR)$(INSTALLTOP)/bin/$$fn"; \
-		cp $$x $(DESTDIR)$(INSTALLTOP)/bin/$$fn.new; \
-		chmod 755 $(DESTDIR)$(INSTALLTOP)/bin/$$fn.new; \
-		mv -f $(DESTDIR)$(INSTALLTOP)/bin/$$fn.new \
-		      $(DESTDIR)$(INSTALLTOP)/bin/$$fn; \
-	done
-	@set -e; for x in $(MISC_SCRIPTS); do \
-		fn=`basename $$x`; \
-		echo "install $$x -> $(DESTDIR)$(OPENSSLDIR)/misc/$$fn"; \
-		cp $$x $(DESTDIR)$(OPENSSLDIR)/misc/$$fn.new; \
-		chmod 755 $(DESTDIR)$(OPENSSLDIR)/misc/$$fn.new; \
-		mv -f $(DESTDIR)$(OPENSSLDIR)/misc/$$fn.new \
-		      $(DESTDIR)$(OPENSSLDIR)/misc/$$fn; \
-	done
-	@echo "install $(SRCDIR)/apps/openssl.cnf -> $(DESTDIR)$(OPENSSLDIR)/openssl.cnf"
-	@cp $(SRCDIR)/apps/openssl.cnf $(DESTDIR)$(OPENSSLDIR)/openssl.cnf.new
-	@chmod 644 $(DESTDIR)$(OPENSSLDIR)/openssl.cnf.new
-	@mv -f  $(DESTDIR)$(OPENSSLDIR)/openssl.cnf.new $(DESTDIR)$(OPENSSLDIR)/openssl.cnf
-
-uninstall_runtime:
-	@echo "*** Uninstalling runtime files"
-	@set -e; for x in $(PROGRAMS); \
-	do  \
-		fn=`basename $$x`; \
-		echo "$(RM) $(DESTDIR)$(INSTALLTOP)/bin/$$fn"; \
-		$(RM) $(DESTDIR)$(INSTALLTOP)/bin/$$fn; \
-	done;
-	@set -e; for x in $(BIN_SCRIPTS); \
-	do  \
-		fn=`basename $$x`; \
-		echo "$(RM) $(DESTDIR)$(INSTALLTOP)/bin/$$fn"; \
-		$(RM) $(DESTDIR)$(INSTALLTOP)/bin/$$fn; \
-	done
-	@set -e; for x in $(MISC_SCRIPTS); \
-	do  \
-		fn=`basename $$x`; \
-		echo "$(RM) $(DESTDIR)$(OPENSSLDIR)/misc/$$fn"; \
-		$(RM) $(DESTDIR)$(OPENSSLDIR)/misc/$$fn; \
-	done
-	: {- output_off() unless windowsdll(); "" -};
-	@set -e; for s in $(SHLIBS); do \
-		fn=`basename $$i`; \
-		echo "$(RM) $(DESTDIR)$(INSTALLTOP)/bin/$$fn"; \
-		$(RM) $(DESTDIR)$(INSTALLTOP)/bin/$$fn; \
-	done
-	: {- output_on() unless windowsdll(); "" -};
-	$(RM) $(DESTDIR)$(OPENSSLDIR)/openssl.cnf
-
-# A method to extract all names from a .pod file
-# The first sed extracts everything between "=head1 NAME" and the next =head1
-# The second sed joins all the lines into one
-# The third sed removes the description and turns all commas into spaces
-# Voilà, you have a space separated list of names!
-EXTRACT_NAMES=sed -e '1,/^=head1  *NAME *$$/d;/^=head1/,$$d' | \
-              sed -e ':a;{N;s/\n/ /;ba}' | \
-              sed -e 's/ - .*$$//;s/,/ /g'
-PROCESS_PODS=\
-	set -e; \
-	here=`cd $(SRCDIR); pwd`; \
-	point=$$here/util/point.sh; \
-	for ds in apps:1 crypto:3 ssl:3; do \
-	    defdir=`echo $$ds | cut -f1 -d:`; \
-	    defsec=`echo $$ds | cut -f2 -d:`; \
-	    for p in $(SRCDIR)/doc/$$defdir/*.pod; do \
-		SEC=`sed -ne 's/^=for  *comment  *openssl_manual_section: *\([0-9]\) *$$/\1/p' $$p`; \
-		[ -z "$$SEC" ] && SEC=$$defsec; \
-		fn=`basename $$p .pod`; \
-		NAME=`echo $$fn | tr [a-z] [A-Z]`; \
-		suf=`eval "echo $$OUTSUFFIX"`; \
-		top=`eval "echo $$OUTTOP"`; \
-		$(PERL) $(SRCDIR)/util/mkdir-p.pl $$top/man$$SEC; \
-		echo "install $$p -> $$top/man$$SEC/$$fn$$suf"; \
-		cat $$p | eval "$$GENERATE" \
-			>  $$top/man$$SEC/$$fn$$suf; \
-		names=`cat $$p | $(EXTRACT_NAMES)`; \
-		( cd $$top/man$$SEC; \
-		  for n in $$names; do \
-		      comp_n="$$n"; \
-		      comp_fn="$$fn"; \
-		      case "$(PLATFORM)" in DJGPP|Cygwin*|mingw*|darwin*-*-cc) \
-			  comp_n=`echo "$$n" | tr [A-Z] [a-z]`; \
-			  comp_fn=`echo "$$fn" | tr [A-Z] [a-z]`; \
-			  ;; \
-		      esac; \
-		      if [ "$$comp_n" != "$$comp_fn" ]; then \
-			  echo "link $$top/man$$SEC/$$n$$suf -> $$top/man$$SEC/$$fn$$suf"; \
-			  PLATFORM=$(PLATFORM) $$point $$fn$$suf $$n$$suf; \
-		      fi; \
-		  done ); \
-	    done; \
-	done
-UNINSTALL_DOCS=\
-	set -e; \
-	here=`cd $(SRCDIR); pwd`; \
-	for ds in apps:1 crypto:3 ssl:3; do \
-	    defdir=`echo $$ds | cut -f1 -d:`; \
-	    defsec=`echo $$ds | cut -f2 -d:`; \
-	    for p in $(SRCDIR)/doc/$$defdir/*.pod; do \
-		SEC=`sed -ne 's/^=for  *comment  *openssl_manual_section: *\([0-9]\) *$$/\1/p' $$p`; \
-		[ -z "$$SEC" ] && SEC=$$defsec; \
-		fn=`basename $$p .pod`; \
-		suf=`eval "echo $$OUTSUFFIX"`; \
-		top=`eval "echo $$OUTTOP"`; \
-		echo "$(RM) $$top/man$$SEC/$$fn$$suf"; \
-	        $(RM) $$top/man$$SEC/$$fn$$suf; \
-		names=`cat $$p | $(EXTRACT_NAMES)`; \
-		for n in $$names; do \
-		    comp_n="$$n"; \
-		    comp_fn="$$fn"; \
-		    case "$(PLATFORM)" in DJGPP|Cygwin*|mingw*|darwin*-*-cc) \
-			comp_n=`echo "$$n" | tr [A-Z] [a-z]`; \
-			comp_fn=`echo "$$fn" | tr [A-Z] [a-z]`; \
-			;; \
-		    esac; \
-		    if [ "$$comp_n" != "$$comp_fn" ]; then \
-			echo "$(RM) $$top/man$$SEC/$$n$$suf"; \
-			$(RM) $$top/man$$SEC/$$n$$suf; \
-		    fi; \
-		done; \
-	    done; \
-	done
-
-install_man_docs:
-	@[ -n "$(INSTALLTOP)" ] || (echo INSTALLTOP should not be empty; exit 1)
-	@echo "*** Installing manpages"
-	@\
-	OUTSUFFIX='.$${SEC}$(MANSUFFIX)'; \
-	OUTTOP="$(DESTDIR)$(MANDIR)"; \
-	GENERATE='pod2man --name=$$NAME --section=$$SEC --center=OpenSSL --release=$(VERSION)'; \
-	$(PROCESS_PODS)
-
-uninstall_man_docs:
-	@echo "*** Uninstalling manpages"
-	@\
-	OUTSUFFIX='.$${SEC}$(MANSUFFIX)'; \
-	OUTTOP="$(DESTDIR)$(MANDIR)"; \
-	$(UNINSTALL_DOCS)
-
-install_html_docs:
-	@[ -n "$(INSTALLTOP)" ] || (echo INSTALLTOP should not be empty; exit 1)
-	@echo "*** Installing HTML manpages"
-	@\
-	OUTSUFFIX='.$(HTMLSUFFIX)'; \
-	OUTTOP="$(DESTDIR)$(HTMLDIR)"; \
-	GENERATE="pod2html --podroot=$(SRCDIR)/doc --htmldir=.. \
-			   --podpath=apps:crypto:ssl \
-		  | sed -e 's|href=\"http://man.he.net/man|href=\"../man|g'"; \
-	$(PROCESS_PODS)
-
-uninstall_html_docs:
-	@echo "*** Uninstalling manpages"
-	@\
-	OUTSUFFIX='.$(HTMLSUFFIX)'; \
-	OUTTOP="$(DESTDIR)$(HTMLDIR)"; \
-	$(UNINSTALL_DOCS)
-
-
-# Developer targets (note: these are only available on Unix) #########
-
-update: generate errors ordinals
-
-generate: generate_apps generate_crypto_bn generate_crypto_objects
-
-# Test coverage is a good idea for the future
-#coverage: $(PROGRAMS) $(TESTPROGRAMS)
-#	...
-
-# Currently disabled, util/selftest.pl needs a rewrite
-#report:
-#	SRCDIR=$(SRCDIR) @$(PERL) util/selftest.pl
-
-lint:
-	lint -DLINT $(INCLUDES) $(SRCS)
-
-generate_apps: $(SRCDIR)/apps/openssl-vms.cnf $(SRCDIR)/apps/progs.h
-
-generate_crypto_bn: $(SRCDIR)/crypto/bn/bn_prime.h
-
-generate_crypto_objects: $(SRCDIR)/crypto/objects/obj_dat.h \
-                         $(SRCDIR)/include/openssl/obj_mac.h \
-                         $(SRCDIR)/crypto/objects/obj_xref.h
-
-errors:
-	( cd $(SRCDIR); $(PERL) util/ck_errf.pl -strict */*.c */*/*.c )
-	( cd $(SRCDIR); $(PERL) util/mkerr.pl -recurse -write )
-	( cd $(SRCDIR)/engines; \
-	  for e in *.ec; do \
-	      $(PERL) ../util/mkerr.pl -conf $$e \
-		      -nostatic -staticloader -write *.c; \
-	  done )
-	( cd $(SRCDIR)/crypto/ct; \
-	  $(PERL) ../../util/mkerr.pl -conf ct.ec -hprefix internal/ -write *.c )
-
-ordinals:
-	( b=`pwd`; cd $(SRCDIR); $(PERL) -I$$b util/mkdef.pl crypto update )
-	( b=`pwd`; cd $(SRCDIR); $(PERL) -I$$b util/mkdef.pl ssl update )
-
-test_ordinals:
-	( cd test; \
-	  SRCTOP=../$(SRCDIR) \
-	  BLDTOP=../$(BLDDIR) \
-	    $(PERL) ../$(SRCDIR)/test/run_tests.pl test_ordinals )
-
-tags TAGS: FORCE
-	rm -f TAGS tags
-	-ctags -R .
-	-etags `find . -name '*.[ch]' -o -name '*.pm'`
-
-# Release targets (note: only available on Unix) #####################
-
-tar:
-	TMPDIR=/var/tmp/openssl-copy.$$$$; \
-	DISTDIR=openssl-$(VERSION); \
-	mkdir -p $$TMPDIR/$$DISTDIR; \
-	(cd $(SRCDIR); \
-	 git ls-tree -r --name-only --full-tree HEAD \
-	 | while read F; do \
-	       mkdir -p $$TMPDIR/$$DISTDIR/`dirname $$F`; \
-	       cp $$F $$TMPDIR/$$DISTDIR/$$F; \
-	   done); \
-	(cd $$TMPDIR; \
-	 [ -n "$(PREPARE_CMD)" ] && $(PREPARE_CMD); \
-	 find $$TMPDIR/$$DISTDIR -type d -print | xargs chmod 755; \
-	 find $$TMPDIR/$$DISTDIR -type f -print | xargs chmod a+r; \
-	 find $$TMPDIR/$$DISTDIR -type f -perm -0100 -print | xargs chmod a+x; \
-	 $(TAR) $(TARFLAGS) --owner 0 --group 0 -cvf - $$DISTDIR) \
-	| (cd $(SRCDIR); gzip --best > $(TARFILE).gz); \
-	rm -rf $$TMPDIR
-	cd $(SRCDIR); ls -l $(TARFILE).gz
-
-dist:
-	@$(MAKE) PREPARE_CMD='./Configure dist' tar
-
-# Helper targets #####################################################
-
-rehash: link-utils copy-certs build_apps
-	@if [ -z "$(CROSS_COMPILE)" ]; then \
-		(OPENSSL="$(BLDDIR)/util/shlib_wrap.sh apps/openssl"; \
-		[ -x "$(BLDDIR)/openssl.exe" ] && OPENSSL="$(BLDDIR)/openssl.exe" || :; \
-		OPENSSL_DEBUG_MEMORY=on; OPENSSL_CONF=/dev/null ; \
-		export OPENSSL OPENSSL_DEBUG_MEMORY OPENSSL_CONF; \
-		$$OPENSSL rehash certs/demo \
-		|| $(PERL) tools/c_rehash certs/demo) && \
-		touch rehash.time; \
-	else :; fi
-
-link-utils: $(BLDDIR)/util/opensslwrap.sh $(BLDDIR)/util/shlib_wrap.sh
-
-$(BLDDIR)/util/opensslwrap.sh: Makefile
-	@if [ "$(SRCDIR)" != "$(BLDDIR)" ]; then \
-	    mkdir -p "$(BLDDIR)/util"; \
-	    ln -sf "../$(SRCDIR)/util/opensslwrap.sh" "$(BLDDIR)/util"; \
-	fi
-$(BLDDIR)/util/shlib_wrap.sh: Makefile
-	@if [ "$(SRCDIR)" != "$(BLDDIR)" ]; then \
-	    mkdir -p "$(BLDDIR)/util"; \
-	    ln -sf "../$(SRCDIR)/util/shlib_wrap.sh" "$(BLDDIR)/util"; \
-	fi
-
-copy-certs: FORCE
-	@if [ "$(SRCDIR)" != "$(BLDDIR)" ]; then \
-	    cp -R "$(SRCDIR)/certs" "$(BLDDIR)/"; \
-	fi
-
-$(SRCDIR)/apps/openssl-vms.cnf: $(SRCDIR)/apps/openssl.cnf
-	$(PERL) $(SRCDIR)/VMS/VMSify-conf.pl \
-                < $(SRCDIR)/apps/openssl.cnf > $(SRCDIR)/apps/openssl-vms.cnf
-
-{- # because the program apps/openssl has object files as sources, and
-   # they then have the corresponding C files as source, we need to chain
-   # the lookups in %unified_info
-   my $apps_openssl = catfile("apps","openssl");
-   our @openssl_source = map { @{$unified_info{sources}->{$_}} }
-                         @{$unified_info{sources}->{$apps_openssl}};
-   ""; -}
-$(SRCDIR)/apps/progs.h:
-	$(RM) $@
-	$(PERL) $(SRCDIR)/apps/progs.pl {- join(" ", @openssl_source) -} > $@
-
-$(SRCDIR)/crypto/bn/bn_prime.h: $(SRCDIR)/crypto/bn/bn_prime.pl
-	$(PERL) $(SRCDIR)/crypto/bn/bn_prime.pl > $(SRCDIR)/crypto/bn/bn_prime.h
-
-$(SRCDIR)/crypto/objects/obj_dat.h: $(SRCDIR)/crypto/objects/obj_dat.pl \
-                                    $(SRCDIR)/include/openssl/obj_mac.h
-	$(PERL) $(SRCDIR)/crypto/objects/obj_dat.pl \
-                $(SRCDIR)/include/openssl/obj_mac.h \
-                $(SRCDIR)/crypto/objects/obj_dat.h
-
-# objects.pl both reads and writes obj_mac.num
-$(SRCDIR)/include/openssl/obj_mac.h: $(SRCDIR)/crypto/objects/objects.pl \
-                                     $(SRCDIR)/crypto/objects/objects.txt \
-                                     $(SRCDIR)/crypto/objects/obj_mac.num
-	$(PERL) $(SRCDIR)/crypto/objects/objects.pl \
-                $(SRCDIR)/crypto/objects/objects.txt \
-                $(SRCDIR)/crypto/objects/obj_mac.num \
-                $(SRCDIR)/include/openssl/obj_mac.h
-	@sleep 1; touch $(SRCDIR)/include/openssl/obj_mac.h; sleep 1
-
-$(SRCDIR)/crypto/objects/obj_xref.h: $(SRCDIR)/crypto/objects/objxref.pl \
-                                     $(SRCDIR)/crypto/objects/obj_xref.txt \
-                                     $(SRCDIR)/crypto/objects/obj_mac.num
-	$(PERL) $(SRCDIR)/crypto/objects/objxref.pl \
-                $(SRCDIR)/crypto/objects/obj_mac.num \
-                $(SRCDIR)/crypto/objects/obj_xref.txt \
-                > $(SRCDIR)/crypto/objects/obj_xref.h
-	@sleep 1; touch $(SRCDIR)/crypto/objects/obj_xref.h; sleep 1
-
-FORCE :
-
-# Building targets ###################################################
-
-libcrypto.pc libssl.pc openssl.pc: Makefile $(LIBS)
-libcrypto.pc:
-	@ ( echo 'prefix=$(INSTALLTOP)'; \
-	    echo 'exec_prefix=$${prefix}'; \
-	    echo 'libdir=$${exec_prefix}/$(LIBDIR)'; \
-	    echo 'includedir=$${prefix}/include'; \
-	    echo ''; \
-	    echo 'Name: OpenSSL-libcrypto'; \
-	    echo 'Description: OpenSSL cryptography library'; \
-	    echo 'Version: '$(VERSION); \
-	    echo 'Libs: -L$${libdir} -lcrypto'; \
-	    echo 'Libs.private: $(EX_LIBS)'; \
-	    echo 'Cflags: -I$${includedir}' ) > libcrypto.pc
-
-libssl.pc:
-	@ ( echo 'prefix=$(INSTALLTOP)'; \
-	    echo 'exec_prefix=$${prefix}'; \
-	    echo 'libdir=$${exec_prefix}/$(LIBDIR)'; \
-	    echo 'includedir=$${prefix}/include'; \
-	    echo ''; \
-	    echo 'Name: OpenSSL-libssl'; \
-	    echo 'Description: Secure Sockets Layer and cryptography libraries'; \
-	    echo 'Version: '$(VERSION); \
-	    echo 'Requires.private: libcrypto'; \
-	    echo 'Libs: -L$${libdir} -lssl'; \
-	    echo 'Libs.private: $(EX_LIBS)'; \
-	    echo 'Cflags: -I$${includedir}' ) > libssl.pc
-
-openssl.pc:
-	@ ( echo 'prefix=$(INSTALLTOP)'; \
-	    echo 'exec_prefix=$${prefix}'; \
-	    echo 'libdir=$${exec_prefix}/$(LIBDIR)'; \
-	    echo 'includedir=$${prefix}/include'; \
-	    echo ''; \
-	    echo 'Name: OpenSSL'; \
-	    echo 'Description: Secure Sockets Layer and cryptography libraries and tools'; \
-	    echo 'Version: '$(VERSION); \
-	    echo 'Requires: libssl libcrypto' ) > openssl.pc
-
-# Note on the use of $(MFLAGS): this was an older variant of MAKEFLAGS which
-# wasn't passed down automatically.  It's quite safe to use it like we do
-# below; if it doesn't exist, the result will be empty and 'make' will pick
-# up $(MAKEFLAGS) which is passed down as an environment variable.
-Makefile: {- $config{build_file_template} -} $(SRCDIR)/Configure $(SRCDIR)/config
-	@echo "Makefile is older than {- $config{build_file_template} -}, $(SRCDIR)/Configure or $(SRCDIR)/config."
-	@echo "Reconfiguring..."
-	$(SRCDIR)/Configure reconf
-	@echo "**************************************************"
-	@echo "***                                            ***"
-	@echo "***   Please run the same make command again   ***"
-	@echo "***                                            ***"
-	@echo "**************************************************"
-	@false
-
-{-
-  use File::Basename;
-  use File::Spec::Functions qw/:DEFAULT abs2rel rel2abs/;
-
-  # Helper function to figure out dependencies on libraries
-  # It takes a list of library names and outputs a list of dependencies
-  sub compute_lib_depends {
-      if ($config{no_shared}) {
-          return map { $_."\$(LIB_EXT)" } @_;
-      }
-
-      # Depending on shared libraries:
-      # On Windows POSIX layers, we depend on {libname}.dll.a
-      # On Unix platforms, we depend on {shlibname}.so
-      return map { if (windowsdll()) {
-                       "$_\$(SHLIB_EXT_SIMPLE).a"
-		   } else {
-		       my $libname =
-		           $unified_info{sharednames}->{$_} || $_;
-		       "$libname\$(SHLIB_EXT_SIMPLE)"
-		   } } @_;
-  }
-
-  sub src2dep {
-      my %args = @_;
-      my $dep = $args{obj}.'$(DEP_EXT)';
-      my $obj = $args{obj}.'$(OBJ_EXT)';
-      my $srcs = join(" ", @{$args{srcs}});
-      my $deps = join(" ", @{$args{srcs}}, @{$args{deps}});
-      my $incs = join(" ", map { " -I".$_ } @{$args{incs}});
-      my $makedepprog = $config{makedepprog};
-      if ($makedepprog eq "makedepend") {
-          return <<"EOF";
-$dep : $deps
-	rm -f \$\@.tmp; touch \$\@.tmp
-	\$(MAKEDEPEND) -f\$\@.tmp -o"|$obj"\
-	    -- -DOPENSSL_DOING_MAKEDEPEND \$(DEPFLAGS)$incs \
-	    -- $srcs
-	sed -e 's/^.*|//' -e 's/ \\/\\(\\\\.\\|[^ ]\\)*//g' -e '/: *\$/d' -e '/^\\(#.*\\| *\\)\$/d' \$\@.tmp > \$\@
-	rm \$\@.tmp
-EOF
-      }
-      return <<"EOF";
-$dep : $deps Makefile
-	\$(CC) -DOPENSSL_DOING_MAKEDEPEND \$(DEPFLAGS)$incs -MM -MF \$\@ -MQ $obj $srcs
-EOF
-  }
-  sub src2obj {
-      my %args = @_;
-      my $obj = $args{obj}.'$(OBJ_EXT)';
-      my $srcs = join(" ", @{$args{srcs}});
-      my $deps = join(" ", @{$args{srcs}}, @{$args{deps}});
-      my $incs = join(" ", map { " -I".$_ } @{$args{incs}});
-      return <<"EOF";
-$obj : $deps
-	\$(CC) \$(CFLAGS)$incs -c -o \$\@ $srcs
-EOF
-  }
-  # On Unix, we build shlibs from static libs, so we're ignoring the
-  # object file array.  We *know* this routine is only called when we've
-  # configure 'shared'.
-  sub libobj2shlib {
-      my %args = @_;
-      my $lib = $args{lib};
-      my $shlib = $args{shlib};
-      my $libd = dirname($lib);
-      my $libn = basename($lib);
-      (my $libname = $libn) =~ s/^lib//;
-      my $linklibs = join("", map { my $d = dirname($_);
-                                    my $f = basename($_);
-                                    (my $l = $f) =~ s/^lib//;
-                                    " -L$d -l$l" } @{$args{deps}});
-      my $deps = join(" ",compute_lib_depends(@{$args{deps}}));
-      my $shlib_target = $target{shared_target};
-      my $ordinalsfile = defined($args{ordinals}) ? $args{ordinals}->[1] : "";
-      my $shlibtarget = windowsdll() ?
-	  "$lib\$(SHLIB_EXT_SIMPLE).a" : "$shlib\$(SHLIB_EXT_SIMPLE)";
-      return <<"EOF"
-# With a build on a Windows POSIX layer (Cygwin or Mingw), we know for a fact
-# that two files get produced, {shlibname}.dll and {libname}.dll.a.
-# With all other Unix platforms, we often build a shared library with the
-# SO version built into the file name and a symlink without the SO version
-# It's not necessary to have both as targets.  The choice falls on the
-# simplest, {libname}\$(SHLIB_EXT_SIMPLE).a for Windows POSIX layers and
-# {libname}\$(SHLIB_EXT_SIMPLE) for the Unix platforms.
-$shlibtarget : $lib\$(LIB_EXT) $deps $ordinalsfile
-	\$(MAKE) -f \$(SRCDIR)/Makefile.shared -e \\
-		PLATFORM=\$(PLATFORM) \\
-		PERL=\$(PERL) SRCDIR="\$(SRCDIR)" DSTDIR="$libd" \\
-		INSTALLTOP="\$(INSTALLTOP)" LIBDIR="\$(LIBDIR)" \\
-		LIBDEPS="\$(PLIB_LDFLAGS) $linklibs \$(EX_LIBS)" \\
-		LIBNAME=$libname LIBVERSION=\$(SHLIB_MAJOR).\$(SHLIB_MINOR) \\
-		LIBCOMPATVERSIONS=";\$(SHLIB_VERSION_HISTORY)" \\
-		CC="\$(CC)" CFLAGS="\$(CFLAGS)" LDFLAGS="\$(LDFLAGS)" \\
-		CROSS_COMPILE="\$(CROSS_COMPILE)" \\
-		SHARED_LDFLAGS="\$(SHARED_LDFLAGS)" SHLIB_EXT=\$(SHLIB_EXT) \\
-		SHARED_RCFLAGS="\$(SHARED_RCFLAGS)" \\
-		link_a.$shlib_target
-EOF
-	  . (windowsdll() ? <<"EOF" : "");
-	rm -f apps/$shlib\$(SHLIB_EXT)
-	rm -f test/$shlib\$(SHLIB_EXT)
-	cp -p $shlib\$(SHLIB_EXT) apps/
-	cp -p $shlib\$(SHLIB_EXT) test/
-EOF
-  }
-  sub obj2dynlib {
-      my %args = @_;
-      my $lib = $args{lib};
-      my $libd = dirname($lib);
-      my $libn = basename($lib);
-      (my $libname = $libn) =~ s/^lib//;
-      my $shlibdeps = join("", map { my $d = dirname($_);
-                                     my $f = basename($_);
-                                     (my $l = $f) =~ s/^lib//;
-                                     " -L$d -l$l" } @{$args{deps}});
-      my $deps = join(" ",compute_lib_depends(@{$args{deps}}));
-      my $shlib_target = $target{shared_target};
-      my $objs = join(" ", map { $_."\$(OBJ_EXT)" } @{$args{objs}});
-      return <<"EOF";
-$lib\$(SHLIB_EXT_SIMPLE): $objs $deps
-	\$(MAKE) -f \$(SRCDIR)/Makefile.shared -e \\
-		PLATFORM=\$(PLATFORM) \\
-		PERL=\$(PERL) SRCDIR="\$(SRCDIR)" DSTDIR="$libd" \\
-		LIBDEPS="\$(PLIB_LDFLAGS) $shlibdeps \$(EX_LIBS)" \\
-		LIBNAME=$libname LDFLAGS="\$(LDFLAGS)" \\
-		CC="\$(CC)" CFLAGS="\$(CFLAGS)" \\
-		SHARED_LDFLAGS="\$(SHARED_LDFLAGS)" \\
-		SHLIB_EXT=\$(SHLIB_EXT_SIMPLE) \\
-		LIBEXTRAS="$objs" \\
-		link_o.$shlib_target
-EOF
-  }
-  sub obj2lib {
-      my %args = @_;
-      my $lib = $args{lib};
-      my $objs = join(" ", map { $_."\$(OBJ_EXT)" } @{$args{objs}});
-      return <<"EOF";
-$lib\$(LIB_EXT) : $objs
-	\$(AR) \$\@ $objs
-	\$(RANLIB) \$\@ || echo Never mind.
-EOF
-  }
-  sub obj2bin {
-      my %args = @_;
-      my $bin = $args{bin};
-      my $bind = dirname($bin);
-      my $binn = basename($bin);
-      my $objs = join(" ", map { $_."\$(OBJ_EXT)" } @{$args{objs}});
-      my $deps = join(" ",compute_lib_depends(@{$args{deps}}));
-      my $linklibs = join("", map { my $d = dirname($_);
-                                    my $f = basename($_);
-                                    $d = "." if $d eq $f;
-                                    (my $l = $f) =~ s/^lib//;
-                                    " -L$d -l$l" } @{$args{deps}});
-      my $shlib_target = $config{no_shared} ? "" : $target{shared_target};
-      return <<"EOF";
-$bin\$(EXE_EXT) : $objs $deps
-	\$(RM) $bin\$(EXE_EXT)
-	\$(MAKE) -f \$(SRCDIR)/Makefile.shared -e \\
-		PERL=\$(PERL) SRCDIR=\$(SRCDIR) \\
-		APPNAME=$bin OBJECTS="$objs" \\
-		LIBDEPS="\$(PLIB_LDFLAGS) $linklibs \$(EX_LIBS)" \\
-		CC="\$(CC)" CFLAGS="\$(CFLAGS)" LDFLAGS="\$(LDFLAGS)" \\
-		LIBRPATH="\$(INSTALLTOP)/\$(LIBDIR)" \\
-		link_app.$shlib_target
-EOF
-  }
-  sub in2script {
-      my %args = @_;
-      my $script = $args{script};
-      my $sources = join(" ", @{$args{sources}});
-      my $dofile = abs2rel(rel2abs(catfile($config{sourcedir},
-                                           "util", "dofile.pl")),
-                           rel2abs($config{builddir}));
-      return <<"EOF";
-$script : $sources
-	\$(PERL) "-I\$(BLDDIR)" -Mconfigdata "$dofile" \\
-	    "-o$target{build_file}" $sources > "$script"
-	chmod a+x $script
-EOF
-  }
-  ""    # Important!  This becomes part of the template result.
--}

GitConfigure

@@ -1,10 +0,0 @@
-#!/bin/sh
-
-BRANCH=`git rev-parse --abbrev-ref HEAD`
-
-./Configure $@
-make files
-util/mk1mf.pl OUT=out.$BRANCH TMP=tmp.$BRANCH INC=inc.$BRANCH copy > makefile.$BRANCH
-MAKE=make
-which bsdmake > /dev/null && MAKE=bsdmake
-$MAKE -f makefile.$BRANCH init

GitMake

@@ -1,7 +0,0 @@
-#!/bin/sh
-
-BRANCH=`git rev-parse --abbrev-ref HEAD`
-
-MAKE=make
-which bsdmake > /dev/null && MAKE=bsdmake
-$MAKE -f makefile.$BRANCH $@

INSTALL

@@ -3,7 +3,7 @@
  ---------------------------------
 
  [Installation on DOS (with djgpp), Windows, OpenVMS, MacOS (before MacOS X)
-  and NetWare is described in INSTALL.DJGPP, INSTALL.WIN, INSTALL.VMS,
+  and NetWare is described in INSTALL.DJGPP, INSTALL.W32, INSTALL.VMS,
   INSTALL.MacOS and INSTALL.NW.
   
   This document describes installation on operating systems in the Unix
@@ -12,8 +12,7 @@
  To install OpenSSL, you will need:
 
   * make
-  * Perl 5 with core modules (please read README.PERL)
-  * The perl module Text::Template (please read README.PERL)
+  * Perl 5
   * an ANSI C compiler
   * a development environment in form of development libraries and C
     header files
@@ -51,19 +50,6 @@
   --openssldir=DIR Directory for OpenSSL files. If no prefix is specified,
                 the library files and binaries are also installed there.
 
-  no-autoalginit Don't automatically load all supported ciphers and digests.
-                Typically OpenSSL will make available all of its supported
-                ciphers and digests. For a statically linked application this
-                may be undesirable if small executable size is an objective.
-                This only affects libcrypto. Ciphers and digests will have to be
-                loaded manually using EVP_add_cipher() and EVP_add_digest() if
-                this option is used.
-
-  no-autoerrinit Don't automatically load all libcrypto/libssl error strings.
-                Typically OpenSSL will automatically load human readable error
-                strings. For a statically linked application this may be
-                undesirable if small executable size is an objective.
-
   no-threads    Don't try to build with support for multi-threaded
                 applications.
 
@@ -93,7 +79,7 @@
                 compiler flags for any other CPU specific configuration,
                 e.g. "-m32" to build x86 code on an x64 system.
 
-  no-sse2	Exclude SSE2 code pathes. Normally SSE2 extension is
+  no-sse2	Exclude SSE2 code pathes. Normally SSE2 extention is
 		detected at run-time, but the decision whether or not the
 		machine code will be executed is taken solely on CPU
 		capability vector. This means that if you happen to run OS
@@ -117,6 +103,12 @@
                 define preprocessor symbols, specify additional libraries,
                 library directories or other compiler options.
 
+  -DHAVE_CRYPTODEV Enable the BSD cryptodev engine even if we are not using
+		BSD. Useful if you are running ocf-linux or something
+		similar. Once enabled you can also enable the use of
+		cryptodev digests, which is usually slower unless you have
+		large amounts data. Use -DUSE_CRYPTODEV_DIGESTS to force
+		it.
 
  Installation in Detail
  ----------------------
@@ -155,7 +147,7 @@
      generic configurations "cc" or "gcc" should usually work on 32 bit
      systems.
 
-     Configure creates the file Makefile.ssl from Makefile.in and
+     Configure creates the file Makefile.ssl from Makefile.org and
      defines various macros in crypto/opensslconf.h (generated from
      crypto/opensslconf.h.in).
 
@@ -172,10 +164,10 @@
      standard headers).  If it is a problem with OpenSSL itself, please
      report the problem to <openssl-bugs@openssl.org> (note that your
      message will be recorded in the request tracker publicly readable
-     at https://www.openssl.org/community/index.html#bugs and will be
-     forwarded to a public mailing list). Include the output of "make
-     report" in your message.  Please check out the request tracker. Maybe
-     the bug was already reported or has already been fixed.
+     via http://www.openssl.org/support/rt.html and will be forwarded to a
+     public mailing list). Include the output of "make report" in your message.
+     Please check out the request tracker. Maybe the bug was already
+     reported or has already been fixed.
 
      [If you encounter assembler error messages, try the "no-asm"
      configuration option as an immediate fix.]
@@ -187,38 +179,14 @@
 
        $ make test
 
-     If some tests fail, look at the output.  There may be reasons for
-     the failure that isn't a problem in OpenSSL itself (like a
-     malfunction with Perl).  You may want increased verbosity, that
-     can be accomplished like this:
-
-       $ HARNESS_VERBOSE=yes make test
-
-     If you want to run just one or a few specific tests, you can use
-     the make variable TESTS to specify them, like this:
-
-       $ make TESTS='test_rsa test_dsa' test
-
-     And of course, you can combine:
-       
-       $ HARNESS_VERBOSE=yes make TESTS='test_rsa test_dsa' test
-
-     You can find the list of available tests like this:
-
-       $ make list-tests
-
-     Have a look at the manual for the perl module Test::Harness to
-     see what other HARNESS_* variables there are.
-
-     If you find a problem with OpenSSL itself, try removing any
-     compiler optimization flags from the CFLAG line in Makefile and
-     run "make clean; make".
-
-     Please send a bug report to <openssl-bugs@openssl.org>, and when
-     you do, please run the following and include the output in your
-     report:
-
-       $ make report
+     If a test fails, look at the output.  There may be reasons for
+     the failure that isn't a problem in OpenSSL itself (like a missing
+     or malfunctioning bc).  If it is a problem with OpenSSL itself,
+     try removing any compiler optimization flags from the CFLAG line
+     in Makefile.ssl and run "make clean; make". Please send a bug
+     report to <openssl-bugs@openssl.org>, including the output of
+     "make report" in order to be added to the request tracker at
+     http://www.openssl.org/support/rt.html.
 
   4. If everything tests ok, install OpenSSL with
 
@@ -252,9 +220,10 @@
      locations, but have the package installed somewhere else so that
      it can easily be packaged, can use
 
-       $ make DESTDIR=/tmp/package-root install
+       $ make INSTALL_PREFIX=/tmp/package-root install
 
-     The specified destination directory will be prepended to all
+     (or specify "--install_prefix=/tmp/package-root" as a configure
+     option).  The specified prefix will be prepended to all
      installation target filenames.
 
 
@@ -339,10 +308,6 @@
  you can still use "no-threads" to suppress an annoying warning message
  from the Configure script.)
 
- OpenSSL provides built-in support for two threading models: pthreads (found on
- most UNIX/Linux systems), and Windows threads. No other threading models are
- supported. If your platform does not provide pthreads or Windows threads then
- you should Configure with the "no-threads" option.
 
  Note on shared libraries
  ------------------------
@@ -387,7 +352,7 @@
 		rm -f $F; ln -s $OPENSSL_SOURCE/$F $F
 		echo $F '->' $OPENSSL_SOURCE/$F
 	done
-	make -f Makefile.in clean
+	make -f Makefile.org clean
 
  OPENSSL_SOURCE is an environment variable that contains the absolute (this
  is important!) path to the OpenSSL source tree.

INSTALL.DJGPP

@@ -11,8 +11,7 @@
 
  You should have a full DJGPP environment installed, including the
  latest versions of DJGPP, GCC, BINUTILS, BASH, etc. This package
- requires that PERL and the PERL module Text::Template also be
- installed.
+ requires that PERL and BC also be installed.
 
  All of these can be obtained from the usual DJGPP mirror sites or
  directly at "http://www.delorie.com/pub/djgpp". For help on which

INSTALL.MacOS

@@ -0,0 +1,72 @@
+OpenSSL - Port To The Macintosh OS 9 or Earlier
+===============================================
+
+Thanks to Roy Wood <roy@centricsystems.ca> initial support for Mac OS (pre
+X) is now provided. "Initial" means that unlike other platforms where you
+get an SDK and a "swiss army" openssl application, on Macintosh you only
+get one sample application which fetches a page over HTTPS(*) and dumps it
+in a window. We don't even build the test applications so that we can't
+guarantee that all algorithms are operational.
+
+Required software:
+
+- StuffIt Expander 5.5 or later, alternatively MacGzip and SUNtar;
+- Scriptable Finder;
+- CodeWarrior Pro 5;
+
+Installation procedure:
+
+- fetch the source at ftp://ftp.openssl.org/ (well, you probably already
+  did, huh?)
+- unpack the .tar.gz file:
+	- if you have StuffIt Expander then just drag it over it;
+	- otherwise uncompress it with MacGzip and then unpack with SUNtar;
+- locate MacOS folder in OpenSSL source tree and open it;
+- unbinhex mklinks.as.hqx and OpenSSL.mcp.hqx if present (**), do it
+  "in-place", i.e. unpacked files should end-up in the very same folder;
+- execute mklinks.as;
+- open OpenSSL.mcp(***) and build 'GetHTTPS PPC' target(****);
+- that's it for now;
+
+(*)	URL is hardcoded into ./MacOS/GetHTTPS.src/GetHTTPS.cpp, lines 40
+        to 42, change appropriately.
+(**)	If you use SUNtar, then it might have already unbinhexed the files
+	in question.
+(***)	The project file was saved with CW Pro 5.3. If you have an earlier
+	version and it refuses to open it, then download
+	http://www.openssl.org/~appro/OpenSSL.mcp.xml and import it
+	overwriting the original OpenSSL.mcp.
+(****)	Other targets are works in progress. If you feel like giving 'em a
+	shot, then you should know that OpenSSL* and Lib* targets are
+	supposed to be built with the GUSI, MacOS library which mimics
+	BSD sockets and some other POSIX APIs. The GUSI distribution is
+	expected to be found in the same directory as the openssl source tree,
+	i.e., in the parent directory to the one where this very file,
+	namely INSTALL.MacOS, resides. For more information about GUSI, see
+	http://www.iis.ee.ethz.ch/~neeri/macintosh/gusi-qa.html
+
+Finally some essential comments from our generous contributor:-)
+
+"I've gotten OpenSSL working on the Macintosh. It's probably a bit of a
+hack, but it works for what I'm doing. If you don't like the way I've done
+it, then feel free to change what I've done. I freely admit that I've done
+some less-than-ideal things in my port, and if you don't like the way I've
+done something, then feel free to change it-- I won't be offended!
+
+... I've tweaked "bss_sock.c" a little to call routines in a "MacSocket"
+library I wrote. My MacSocket library is a wrapper around OpenTransport,
+handling stuff like endpoint creation, reading, writing, etc. It is not
+designed as a high-performance package such as you'd use in a webserver,
+but is fine for lots of other applications. MacSocket also uses some other
+code libraries I've written to deal with string manipulations and error
+handling. Feel free to use these things in your own code, but give me
+credit and/or send me free stuff in appreciation! :-)
+
+...
+
+If you have any questions, feel free to email me as the following:
+
+roy@centricsystems.ca
+
+-Roy Wood"
+

INSTALL.NW

@@ -378,7 +378,7 @@ The openssl program has numerous options and can be used for many different
 things.  Many of the options operate in an interactive mode requiring the
 user to enter data.  Because of this, a default screen is created for the
 program.  However, when running the test script it is not desirable to
-have a separate screen.  Therefore, the build also creates openssl2.nlm.
+have a seperate screen.  Therefore, the build also creates openssl2.nlm.
 Openssl2.nlm is functionally identical but uses the console screen.
 Openssl2 can be used when a non-interactive mode is desired.
 

INSTALL.VMS

@@ -1,66 +1,293 @@
-
- INSTALLATION ON THE VMS PLATFORM
- --------------------------------
-
- Intro
- -----
-
- This file is divided in the following parts:
-
-   Requirements                 - Mandatory reading.
-   Cheking the distribution     - Mandatory reading.
-   Quick start
-   Test                         <TO BE ADDED>
-   Installation                 <TO BE ADDED>
-   Backward portability         <TO BE ADDED>
-   Possible bugs and quirks     <TO BE ADDED>
+			VMS Installation instructions
+			written by Richard Levitte
+			<richard@levitte.org>
 
 
- Requirements
- ------------
+Intro:
+======
 
- To build and install OpenSSL, you will need:
+This file is divided in the following parts:
 
-  * Perl 5 with core modules (please read README.PERL)
-  * The perl module Text::Template (please read README.PERL)
-  * DEC C or some other ANSI C compiler.  VAX C is *not* supported.
-    [Note: OpenSSL has only been tested with DEC C.  Compiling with 
-     a different ANSI C compiler may require some work]
-
- Checking the distribution
- -------------------------
-
- There have been reports of places where the distribution didn't quite
- get through, for example if you've copied the tree from a NFS-mounted
- Unix mount point.
-
- The easiest way to check if everything got through as it should is to
- check for one of the following files:
-
-  [.crypto]opensslconf^.h.in
-
- The best way to get a correct distribution is to download the gzipped
- tar file from ftp://ftp.openssl.org/source/, use GUNZIP to uncompress
- it and use VMSTAR to unpack the resulting tar file.
-
- GUNZIP is available {FIXME: where is it available?}
-
- VMSTAR is available {FIXME: where is it available?}
+  Requirements			- Mandatory reading.
+  Checking the distribution	- Mandatory reading.
+  Compilation			- Mandatory reading.
+  Logical names			- Mandatory reading.
+  Test				- Mandatory reading.
+  Installation			- Mandatory reading.
+  Backward portability		- Read if it's an issue.
+  Possible bugs or quirks	- A few warnings on things that
+				  may go wrong or may surprise you.
+  TODO				- Things that are to come.
 
 
- Quick start
- -----------
+Requirements:
+=============
 
- If you want to just get on with it, do this:
+To build and install OpenSSL, you will need:
 
-  $ @config
-  $ mms
-  $ mms test
-  $ mmm install
+ * DEC C or some other ANSI C compiler.  VAX C is *not* supported.
+   [Note: OpenSSL has only been tested with DEC C.  Compiling with 
+    a different ANSI C compiler may require some work]
 
- This will buidl and install OpenSSL in the default location, which is
- SYS$COMMON:[OPENSSL-'VERSION'].  If you want it to be anywhere else,
- run config.com like this:
+Checking the distribution:
+==========================
 
-  $ @config --prefix=PROGRAM:[OPENSSL]
+There have been reports of places where the distribution didn't quite get
+through, for example if you've copied the tree from a NFS-mounted Unix
+mount point.
 
+The easiest way to check if everything got through as it should is to check
+for one of the following files:
+
+	[.CRYPTO]OPENSSLCONF.H_IN
+	[.CRYPTO]OPENSSLCONF_H.IN
+
+They should never exist both at once, but one of them should (preferably
+the first variant).  If you can't find any of those two, something went
+wrong.
+
+The best way to get a correct distribution is to download the gzipped tar
+file from ftp://ftp.openssl.org/source/, use GUNZIP to uncompress it and
+use VMSTAR to unpack the resulting tar file.
+
+GUNZIP is available in many places on the net.  One of the distribution
+points is the WKU software archive, ftp://ftp.wku.edu/vms/fileserv/ .
+
+VMSTAR is also available in many places on the net.  The recommended place
+to find information about it is http://www.free.lp.se/vmstar/ .
+
+
+Compilation:
+============
+
+I've used the very good command procedures written by Robert Byer
+<byer@mail.all-net.net>, and just slightly modified them, making
+them slightly more general and easier to maintain.
+
+You can actually compile in almost any directory separately.  Look
+for a command procedure name xxx-LIB.COM (in the library directories)
+or MAKExxx.COM (in the program directories) and read the comments at
+the top to understand how to use them.  However, if you want to
+compile all you can get, the simplest is to use MAKEVMS.COM in the top
+directory.  The syntax is the following:
+
+  @MAKEVMS <option> <bits> <debug-p> [<compiler>]
+
+<option> must be one of the following:
+
+      ALL       Just build "everything".
+      CONFIG    Just build the "[.CRYPTO]OPENSSLCONF.H" file.
+      BUILDINF  Just build the "[.INCLUDE]BUILDINF.H" file.
+      SOFTLINKS Just copies some files, to simulate Unix soft links.
+      BUILDALL  Same as ALL, except CONFIG, BUILDINF and SOFTLINKS aren't done.
+      RSAREF    Just build the "[.xxx.EXE.RSAREF]LIBRSAGLUE.OLB" library.
+      CRYPTO    Just build the "[.xxx.EXE.CRYPTO]LIBCRYPTO.OLB" library.
+      SSL       Just build the "[.xxx.EXE.SSL]LIBSSL.OLB" library.
+      SSL_TASK  Just build the "[.xxx.EXE.SSL]SSL_TASK.EXE" program.
+      TEST      Just build the "[.xxx.EXE.TEST]" test programs for OpenSSL.
+      APPS      Just build the "[.xxx.EXE.APPS]" application programs for OpenSSL.
+
+<bits> must be one of the following:
+
+      ""        compile using default pointer size
+      32        compile using 32 bit pointer size
+      64        compile using 64 bit pointer size
+
+<debug-p> must be one of the following:
+
+      DEBUG     compile with debugging info (will not optimize)
+      NODEBUG   compile without debugging info (will optimize)
+
+<compiler> must be one of the following:
+
+      DECC      For DEC C.
+      GNUC      For GNU C.
+
+
+You will find the crypto library in [.xxx.EXE.CRYPTO] (where xxx is VAX,
+ALPHA or IA64), called SSL_LIBCRYPTO32.OLB or SSL_LIBCRYPTO.OLB depending
+on how it was built.  You will find the SSL library in [.xxx.EXE.SSL],
+named SSL_LIBSSL32.OLB or SSL_LIBSSL.OLB, and you will find a bunch of
+useful programs in [.xxx.EXE.APPS].  However, these shouldn't be used
+right off unless it's just to test them.  For production use, make sure
+you install first, see Installation below.
+
+Note 1: Some programs in this package require a TCP/IP library.
+
+Note 2: if you want to compile the crypto library only, please make sure
+        you have at least done a @MAKEVMS CONFIG, a @MAKEVMS BUILDINF and
+        a @MAKEVMS SOFTLINKS.  A lot of things will break if you don't.
+
+
+Logical names:
+==============
+
+There are a few things that can't currently be given through the command
+line.  Instead, logical names are used.
+
+Currently, the logical names supported are:
+
+      OPENSSL_NO_ASM    with value YES, the assembler parts of OpenSSL will
+                        not be used.  Instead, plain C implementations are
+                        used.  This is good to try if something doesn't work.
+      OPENSSL_NO_'alg'  with value YES, the corresponding crypto algorithm
+                        will not be implemented.  Supported algorithms to
+                        do this with are: RSA, DSA, DH, MD2, MD4, MD5, RIPEMD,
+                        SHA, DES, MDC2, CR2, RC4, RC5, IDEA, BF, CAST, HMAC,
+                        SSL2.  So, for example, having the logical name
+                        OPENSSL_NO_RSA with the value YES means that the
+                        LIBCRYPTO.OLB library will not contain an RSA
+                        implementation.
+
+
+Test:
+=====
+
+Testing is very simple, just do the following:
+
+  @[.TEST]TESTS
+
+If a test fails, try with defining the logical name OPENSSL_NO_ASM (yes,
+it's an ugly hack!) and rebuild. Please send a bug report to
+<openssl-bugs@openssl.org>, including the output of "openssl version -a"
+and of the failed test.
+
+
+Installation:
+=============
+
+Installation is easy, just do the following:
+
+  @INSTALL <root> <bits>
+
+<root> is the directory in which everything will be installed,
+subdirectories, libraries, header files, programs and startup command
+procedures.
+
+<bits> works the same way as for MAKEVMS.COM
+
+N.B.: INSTALL.COM builds a new directory structure, different from
+the directory tree where you have now build OpenSSL.
+
+In the [.VMS] subdirectory of the installation, you will find the
+following command procedures:
+
+  OPENSSL_STARTUP.COM
+
+        defines all needed logical names.  Takes one argument that
+        tells it in what logical name table to insert the logical
+        names.  If you insert if it SYS$MANAGER:SYSTARTUP_VMS.COM, the
+        call should look like this: 
+
+          @openssldev:[openssldir.VMS]OPENSSL_STARTUP "/SYSTEM"
+
+  OPENSSL_UTILS.COM
+
+        sets up the symbols to the applications.  Should be called
+        from for example SYS$MANAGER:SYLOGIN.COM 
+
+  OPENSSL_UNDO.COM
+
+	deassigns the logical names created with OPENSSL_STARTUP.COM.
+
+The logical names that are set up are the following:
+
+  SSLROOT       a dotted concealed logical name pointing at the
+                root directory.
+
+  SSLCERTS      Initially an empty directory, this is the default
+		location for certificate files.
+  SSLPRIVATE	Initially an empty directory, this is the default
+		location for private key files.
+
+  SSLEXE        Contains the openssl binary and a few other utility
+		programs.
+  SSLINCLUDE    Contains the header files needed if you want to
+		compile programs with libcrypto or libssl.
+  SSLLIB        Contains the OpenSSL library files themselves:
+  		- SSL_LIBCRYPTO32.OLB and SSL_LIBSSL32.OLB or
+		- SSL_LIBCRYPTO.OLB and SSL_LIBSSL.OLB
+
+  OPENSSL	Same as SSLINCLUDE.  This is because the standard
+		way to include OpenSSL header files from version
+		0.9.3 and on is:
+
+			#include <openssl/header.h>
+
+		For more info on this issue, see the INSTALL. file
+		(the NOTE in section 4 of "Installation in Detail").
+		You don't need to "deleting old header files"!!!
+
+
+Backward portability:
+=====================
+
+One great problem when you build a library is making sure it will work
+on as many versions of VMS as possible.  Especially, code compiled on
+OpenVMS version 7.x and above tend to be unusable in version 6.x or
+lower, because some C library routines have changed names internally
+(the C programmer won't usually see it, because the old name is
+maintained through C macros).  One obvious solution is to make sure
+you have a development machine with an old enough version of OpenVMS.
+However, if you are stuck with a bunch of Alphas running OpenVMS version
+7.1, you seem to be out of luck.  Fortunately, the DEC C header files
+are cluttered with conditionals that make some declarations and definitions
+dependent on the OpenVMS version or the C library version, *and* you
+can use those macros to simulate older OpenVMS or C library versions,
+by defining the macros _VMS_V6_SOURCE, __VMS_VER and __CTRL_VER with
+correct values.  In the compilation scripts, I've provided the possibility
+for the user to influence the creation of such macros, through a bunch of
+symbols, all having names starting with USER_.  Here's the list of them:
+
+  USER_CCFLAGS		 - Used to give additional qualifiers to the
+			   compiler.  It can't be used to define macros
+			   since the scripts will do such things as well.
+			   To do such things, use USER_CCDEFS.
+  USER_CCDEFS		 - Used to define macros on the command line.  The
+			   value of this symbol will be inserted inside a
+			   /DEFINE=(...).
+  USER_CCDISABLEWARNINGS - Used to disable some warnings.  The value is
+			   inserted inside a /DISABLE=WARNING=(...).
+
+So, to maintain backward compatibility with older VMS versions, do the
+following before you start compiling:
+
+  $ USER_CCDEFS := _VMS_V6_SOURCE=1,__VMS_VER=60000000,__CRTL_VER=60000000
+  $ USER_CCDISABLEWARNINGS := PREOPTW
+
+The USER_CCDISABLEWARNINGS is there because otherwise, DEC C will complain
+that those macros have been changed.
+
+Note: Currently, this is only useful for library compilation.  The
+      programs will still be linked with the current version of the
+      C library shareable image, and will thus complain if they are
+      faced with an older version of the same C library shareable image.
+      This will probably be fixed in a future revision of OpenSSL.
+
+
+Possible bugs or quirks:
+========================
+
+I'm not perfectly sure all the programs will use the SSLCERTS:
+directory by default, it may very well be that you have to give them
+extra arguments.  Please experiment.
+
+
+TODO:
+=====
+
+There are a few things that need to be worked out in the VMS version of
+OpenSSL, still:
+
+- Description files. ("Makefile's" :-))
+- Script code to link an already compiled build tree.
+- A VMSINSTALlable version (way in the future, unless someone else hacks).
+- shareable images (DLL for you Windows folks).
+
+There may be other things that I have missed and that may be desirable.
+Please send mail to <openssl-users@openssl.org> or to me directly if you
+have any ideas.
+
+--
+Richard Levitte <richard@levitte.org>
+2000-02-27, 2011-03-18

INSTALL.W32

@@ -0,0 +1,325 @@
+ 
+ INSTALLATION ON THE WIN32 PLATFORM
+ ----------------------------------
+
+ [Instructions for building for Windows CE can be found in INSTALL.WCE]
+ [Instructions for building for Win64 can be found in INSTALL.W64]
+
+ Here are a few comments about building OpenSSL for Win32 environments,
+ such as Windows NT and Windows 9x. It should be noted though that
+ Windows 9x are not ordinarily tested. Its mention merely means that we
+ attempt to maintain certain programming discipline and pay attention
+ to backward compatibility issues, in other words it's kind of expected
+ to work on Windows 9x, but no regression tests are actually performed.
+
+ On additional note newer OpenSSL versions are compiled and linked with
+ Winsock 2. This means that minimum OS requirement was elevated to NT 4
+ and Windows 98 [there is Winsock 2 update for Windows 95 though].
+
+ - you need Perl for Win32.  Unless you will build on Cygwin, you will need
+   ActiveState Perl, available from http://www.activestate.com/ActivePerl.
+
+ - one of the following C compilers:
+
+  * Visual C++
+  * Borland C
+  * GNU C (Cygwin or MinGW)
+
+- Netwide Assembler, a.k.a. NASM, available from http://nasm.sourceforge.net/
+  is required if you intend to utilize assembler modules. Note that NASM
+  is now the only supported assembler.
+
+ If you are compiling from a tarball or a Git snapshot then the Win32 files
+ may well be not up to date. This may mean that some "tweaking" is required to
+ get it all to work. See the trouble shooting section later on for if (when?)
+ it goes wrong.
+
+ Visual C++
+ ----------
+
+ If you want to compile in the assembly language routines with Visual
+ C++, then you will need already mentioned Netwide Assembler binary,
+ nasmw.exe or nasm.exe, to be available on your %PATH%.
+
+ Firstly you should run Configure with platform VC-WIN32:
+
+ > perl Configure VC-WIN32 --prefix=c:\some\openssl\dir
+
+ Where the prefix argument specifies where OpenSSL will be installed to.
+
+ Next you need to build the Makefiles and optionally the assembly
+ language files:
+
+ - If you are using NASM then run:
+
+   > ms\do_nasm
+
+ - If you don't want to use the assembly language files at all then run:
+
+   > perl Configure VC-WIN32 no-asm --prefix=c:/some/openssl/dir
+   > ms\do_ms
+
+ If you get errors about things not having numbers assigned then check the
+ troubleshooting section: you probably won't be able to compile it as it
+ stands.
+
+ Then from the VC++ environment at a prompt do:
+
+ > nmake -f ms\ntdll.mak
+
+ If all is well it should compile and you will have some DLLs and
+ executables in out32dll. If you want to try the tests then do:
+ 
+ > nmake -f ms\ntdll.mak test
+
+
+ To install OpenSSL to the specified location do:
+
+ > nmake -f ms\ntdll.mak install
+
+ Tweaks:
+
+ There are various changes you can make to the Win32 compile
+ environment. By default the library is not compiled with debugging
+ symbols. If you use the platform debug-VC-WIN32 instead of VC-WIN32
+ then debugging symbols will be compiled in.
+
+ By default in 1.0.0 OpenSSL will compile builtin ENGINES into the
+ separate shared librariesy. If you specify the "enable-static-engine"
+ option on the command line to Configure the shared library build
+ (ms\ntdll.mak) will compile the engines into libeay32.dll instead.
+
+ The default Win32 environment is to leave out any Windows NT specific
+ features.
+
+ If you want to enable the NT specific features of OpenSSL (currently
+ only the logging BIO) follow the instructions above but call the batch
+ file do_nt.bat instead of do_ms.bat.
+
+ You can also build a static version of the library using the Makefile
+ ms\nt.mak
+
+
+ Borland C++ builder 5
+ ---------------------
+
+ * Configure for building with Borland Builder:
+   > perl Configure BC-32
+
+ * Create the appropriate makefile
+   > ms\do_nasm
+
+ * Build
+   > make -f ms\bcb.mak
+
+ Borland C++ builder 3 and 4
+ ---------------------------
+
+ * Setup PATH. First must be GNU make then bcb4/bin 
+
+ * Run ms\bcb4.bat
+
+ * Run make:
+   > make -f bcb.mak
+
+ GNU C (Cygwin)
+ --------------
+
+ Cygwin implements a Posix/Unix runtime system (cygwin1.dll) on top of
+ Win32 subsystem and provides a bash shell and GNU tools environment.
+ Consequently, a make of OpenSSL with Cygwin is virtually identical to
+ Unix procedure. It is also possible to create Win32 binaries that only
+ use the Microsoft C runtime system (msvcrt.dll or crtdll.dll) using
+ MinGW. MinGW can be used in the Cygwin development environment or in a
+ standalone setup as described in the following section.
+
+ To build OpenSSL using Cygwin:
+
+ * Install Cygwin (see http://cygwin.com/)
+
+ * Install Perl and ensure it is in the path. Both Cygwin perl
+   (5.6.1-2 or newer) and ActivePerl work.
+
+ * Run the Cygwin bash shell
+
+ * $ tar zxvf openssl-x.x.x.tar.gz
+   $ cd openssl-x.x.x
+
+   To build the Cygwin version of OpenSSL:
+
+   $ ./config
+   [...]
+   $ make
+   [...]
+   $ make test
+   $ make install
+
+   This will create a default install in /usr/local/ssl.
+
+   To build the MinGW version (native Windows) in Cygwin:
+
+   $ ./Configure mingw
+   [...]
+   $ make
+   [...]
+   $ make test
+   $ make install
+
+ Cygwin Notes:
+
+ "make test" and normal file operations may fail in directories
+ mounted as text (i.e. mount -t c:\somewhere /home) due to Cygwin
+ stripping of carriage returns. To avoid this ensure that a binary
+ mount is used, e.g. mount -b c:\somewhere /home.
+
+ "bc" is not provided in older Cygwin distribution.  This causes a
+ non-fatal error in "make test" but is otherwise harmless.  If
+ desired and needed, GNU bc can be built with Cygwin without change.
+
+ GNU C (MinGW/MSYS)
+ -------------
+
+ * Compiler and shell environment installation:
+
+   MinGW and MSYS are available from http://www.mingw.org/, both are
+   required. Run the installers and do whatever magic they say it takes
+   to start MSYS bash shell with GNU tools on its PATH.
+
+   N.B. Since source tar-ball can contain symbolic links, it's essential
+   that you use accompanying MSYS tar to unpack the source. It will
+   either handle them in one way or another or fail to extract them,
+   which does the trick too. Latter means that you may safely ignore all
+   "cannot create symlink" messages, as they will be "re-created" at
+   configure stage by copying corresponding files. Alternative programs
+   were observed to create empty files instead, which results in build
+   failure.
+
+ * Compile OpenSSL:
+
+   $ ./config
+   [...]
+   $ make
+   [...]
+   $ make test
+
+   This will create the library and binaries in root source directory
+   and openssl.exe application in apps directory.
+
+   It is also possible to cross-compile it on Linux by configuring
+   with './Configure --cross-compile-prefix=i386-mingw32- mingw ...'.
+   'make test' is naturally not applicable then.
+
+   libcrypto.a and libssl.a are the static libraries. To use the DLLs,
+   link with libeay32.a and libssl32.a instead.
+
+   See troubleshooting if you get error messages about functions not
+   having a number assigned.
+
+ Installation
+ ------------
+
+ If you used the Cygwin procedure above, you have already installed and
+ can skip this section.  For all other procedures, there's currently no real
+ installation procedure for Win32.  There are, however, some suggestions:
+
+    - do nothing.  The include files are found in the inc32/ subdirectory,
+      all binaries are found in out32dll/ or out32/ depending if you built
+      dynamic or static libraries.
+
+    - do as is written in INSTALL.Win32 that comes with modssl:
+
+	$ md c:\openssl 
+	$ md c:\openssl\bin
+	$ md c:\openssl\lib
+	$ md c:\openssl\include
+	$ md c:\openssl\include\openssl
+	$ copy /b inc32\openssl\*       c:\openssl\include\openssl
+	$ copy /b out32dll\ssleay32.lib c:\openssl\lib
+	$ copy /b out32dll\libeay32.lib c:\openssl\lib
+	$ copy /b out32dll\ssleay32.dll c:\openssl\bin
+	$ copy /b out32dll\libeay32.dll c:\openssl\bin
+	$ copy /b out32dll\openssl.exe  c:\openssl\bin
+
+      Of course, you can choose another device than c:.  C: is used here
+      because that's usually the first (and often only) harddisk device.
+      Note: in the modssl INSTALL.Win32, p: is used rather than c:.
+
+
+ Troubleshooting
+ ---------------
+
+ Since the Win32 build is only occasionally tested it may not always compile
+ cleanly.  If you get an error about functions not having numbers assigned
+ when you run ms\do_ms then this means the Win32 ordinal files are not up to
+ date. You can do:
+
+ > perl util\mkdef.pl crypto ssl update
+
+ then ms\do_XXX should not give a warning any more. However the numbers that
+ get assigned by this technique may not match those that eventually get
+ assigned in the Git tree: so anything linked against this version of the
+ library may need to be recompiled.
+
+ If you get errors about unresolved symbols there are several possible
+ causes.
+
+ If this happens when the DLL is being linked and you have disabled some
+ ciphers then it is possible the DEF file generator hasn't removed all
+ the disabled symbols: the easiest solution is to edit the DEF files manually
+ to delete them. The DEF files are ms\libeay32.def ms\ssleay32.def.
+
+ Another cause is if you missed or ignored the errors about missing numbers
+ mentioned above.
+
+ If you get warnings in the code then the compilation will halt.
+
+ The default Makefile for Win32 halts whenever any warnings occur. Since VC++
+ has its own ideas about warnings which don't always match up to other
+ environments this can happen. The best fix is to edit the file with the
+ warning in and fix it. Alternatively you can turn off the halt on warnings by
+ editing the CFLAG line in the Makefile and deleting the /WX option.
+
+ You might get compilation errors. Again you will have to fix these or report
+ them.
+
+ One final comment about compiling applications linked to the OpenSSL library.
+ If you don't use the multithreaded DLL runtime library (/MD option) your
+ program will almost certainly crash because malloc gets confused -- the
+ OpenSSL DLLs are statically linked to one version, the application must
+ not use a different one.  You might be able to work around such problems
+ by adding CRYPTO_malloc_init() to your program before any calls to the
+ OpenSSL libraries: This tells the OpenSSL libraries to use the same
+ malloc(), free() and realloc() as the application.  However there are many
+ standard library functions used by OpenSSL that call malloc() internally
+ (e.g. fopen()), and OpenSSL cannot change these; so in general you cannot
+ rely on CRYPTO_malloc_init() solving your problem, and you should
+ consistently use the multithreaded library.
+
+ Linking your application
+ ------------------------
+
+ If you link with static OpenSSL libraries [those built with ms/nt.mak],
+ then you're expected to additionally link your application with
+ WS2_32.LIB, ADVAPI32.LIB, GDI32.LIB and USER32.LIB. Those developing
+ non-interactive service applications might feel concerned about linking
+ with the latter two, as they are justly associated with interactive
+ desktop, which is not available to service processes. The toolkit is
+ designed to detect in which context it's currently executed, GUI,
+ console app or service, and act accordingly, namely whether or not to
+ actually make GUI calls. Additionally those who wish to
+ /DELAYLOAD:GDI32.DLL and /DELAYLOAD:USER32.DLL and actually keep them
+ off service process should consider implementing and exporting from
+ .exe image in question own _OPENSSL_isservice not relying on USER32.DLL.
+ E.g., on Windows Vista and later you could:
+
+	__declspec(dllexport) __cdecl BOOL _OPENSSL_isservice(void)
+	{   DWORD sess;
+	    if (ProcessIdToSessionId(GetCurrentProcessId(),&sess))
+	        return sess==0;
+	    return FALSE;
+	}
+
+ If you link with OpenSSL .DLLs, then you're expected to include into
+ your application code small "shim" snippet, which provides glue between
+ OpenSSL BIO layer and your compiler run-time. Look up OPENSSL_Applink
+ reference page for further details.

INSTALL.W64

@@ -0,0 +1,66 @@
+
+ INSTALLATION ON THE WIN64 PLATFORM
+ ----------------------------------
+
+ Caveat lector
+ -------------
+
+ As of moment of this writing Win64 support is classified "initial"
+ for the following reasons.
+
+ - No assembler modules are engaged upon initial 0.9.8 release.
+ - API might change within 0.9.8 life-span, *but* in a manner which
+   doesn't break backward binary compatibility. Or in other words,
+   application programs compiled with initial 0.9.8 headers will
+   be expected to work with future minor release .DLL without need
+   to re-compile, even if future minor release features modified API.
+ - Above mentioned API modifications have everything to do with
+   elimination of a number of limitations, which are normally
+   considered inherent to 32-bit platforms. Which in turn is why they
+   are treated as limitations on 64-bit platform such as Win64:-)
+   The current list comprises [but not necessarily limited to]:
+
+   - null-terminated strings may not be longer than 2G-1 bytes,
+     longer strings are treated as zero-length;
+   - dynamically and *internally* allocated chunks can't be larger
+     than 2G-1 bytes;
+   - inability to encrypt/decrypt chunks of data larger than 4GB
+     [it's possibly to *hash* chunks of arbitrary size through];
+
+   Neither of these is actually big deal and hardly encountered
+   in real-life applications.
+
+ Compiling procedure
+ -------------------
+
+ You will need Perl. You can run under Cygwin or you can download
+ ActiveState Perl from http://www.activestate.com/ActivePerl.
+
+ You will need Microsoft Platform SDK, available for download at
+ http://www.microsoft.com/msdownload/platformsdk/sdkupdate/. As per
+ April 2005 Platform SDK is equipped with Win64 compilers, as well
+ as assemblers, but it might change in the future.
+
+ To build for Win64/x64:
+
+ > perl Configure VC-WIN64A
+ > ms\do_win64a
+ > nmake -f ms\ntdll.mak
+ > cd out32dll
+ > ..\ms\test
+
+ To build for Win64/IA64:
+
+ > perl Configure VC-WIN64I
+ > ms\do_win64i
+ > nmake -f ms\ntdll.mak
+ > cd out32dll
+ > ..\ms\test
+
+ Naturally test-suite itself has to be executed on the target platform.
+
+ Installation
+ ------------
+
+ TBD, for now see INSTALL.W32.
+

INSTALL.WCE

@@ -8,8 +8,6 @@
   * Appropriate SDK might be required
   * Perl for Win32 [commonly recommended ActiveState Perl is available
     from http://www.activestate.com/Products/ActivePerl/]
-    You also need the perl module Text::Template.
-    Please read README.PERL for more information.
 
   * wcecompat compatibility library available at
     http://www.essemer.com.au/windowsce/
@@ -69,6 +67,10 @@
 
  > ms\do_ms
 
+ If you get errors about things not having numbers assigned then check the
+ troubleshooting section in INSTALL.W32: you probably won't be able to compile
+ it as it stands.
+
  Then from the VC++ environment at a prompt do:
 
    > nmake -f ms\cedll.mak

INSTALL.WIN

@@ -1,192 +0,0 @@
-
- INSTALLATION ON WINDOWS PLATFORMS
- ---------------------------------
-
- [Instructions for building for Windows CE can be found in INSTALL.WCE]
-
- Here are a few comments about building OpenSSL for Windows environments.
-
- - you need Perl.  Unless you will build on Cygwin, you will need
-   ActiveState Perl, available from http://www.activestate.com/ActivePerl.  
-   You also need the perl module Text::Template, available on CPAN.
-   Please read README.PERL for more information.
-
- - one of the following C compilers:
-
-  * Visual C++
-  * GNU C (Cygwin or MinGW)
-
-- Netwide Assembler, a.k.a. NASM, available from http://www.nasm.us,
-  is required if you intend to utilize assembler modules. Note that NASM
-  is now the only supported assembler. Without this the "Configure" step below
-  must be done with the "no-asm" option. The Microsoft provided assembler is NOT
-  supported.
-
- Visual C++
- ----------
-
- If you want to compile in the assembly language routines with Visual
- C++, then you will need the Netwide Assembler binary, nasmw.exe or nasm.exe, to
- be available on your %PATH%.
-
- Firstly you should run Configure and generate the Makefiles. If you don't want
- the assembly language files then add the "no-asm" option (without quotes) to
- the Configure lines below.
-
- For Win32:
-
- > perl Configure VC-WIN32 --prefix=c:\some\openssl\dir
- > ms\do_nasm
-
- Note: replace the last line above with the following if not using the assembly
- language files:
-
- > ms\do_ms
-
- For Win64/x64:
-
- > perl Configure VC-WIN64A --prefix=c:\some\openssl\dir
- > ms\do_win64a
-
- For Win64/IA64:
-
- > perl Configure VC-WIN64I --prefix=c:\some\openssl\dir
- > ms\do_win64i
-
- Where the prefix argument specifies where OpenSSL will be installed to.
-
- Then from the VC++ environment at a prompt do the following. Note, your %PATH%
- and other environment variables should be set up for 32-bit or 64-bit
- development as appropriate.
-
- > nmake -f ms\ntdll.mak
-
- If all is well it should compile and you will have some DLLs and
- executables in out32dll. If you want to try the tests then do:
-
- > nmake -f ms\ntdll.mak test
-
- To install OpenSSL to the specified location do:
-
- > nmake -f ms\ntdll.mak install
-
- Tweaks:
-
- There are various changes you can make to the Windows compile
- environment. By default the library is not compiled with debugging
- symbols. If you add --debug to the Configure lines above then debugging symbols
- will be compiled in.
-
- By default in 1.1.0 OpenSSL will compile builtin ENGINES into separate shared
- libraries. If you specify the "enable-static-engine" option on the command line
- to Configure the shared library build (ms\ntdll.mak) will compile the engines
- into libeay32.dll instead.
-
- You can also build a static version of the library using the Makefile
- ms\nt.mak
-
- GNU C (Cygwin)
- --------------
-
- Cygwin implements a Posix/Unix runtime system (cygwin1.dll) on top of the
- Windows subsystem and provides a bash shell and GNU tools environment.
- Consequently, a make of OpenSSL with Cygwin is virtually identical to the
- Unix procedure. It is also possible to create Windows binaries that only
- use the Microsoft C runtime system (msvcrt.dll or crtdll.dll) using
- MinGW. MinGW can be used in the Cygwin development environment or in a
- standalone setup as described in the following section.
-
- To build OpenSSL using Cygwin:
-
- * Install Cygwin (see http://cygwin.com/)
-
- * Install Perl and ensure it is in the path. Both Cygwin perl
-   (5.6.1-2 or newer) and ActivePerl work.
-
- * Run the Cygwin bash shell
-
- * $ tar zxvf openssl-x.x.x.tar.gz
-   $ cd openssl-x.x.x
-
-   To build the Cygwin version of OpenSSL:
-
-   $ ./config
-   [...]
-   $ make
-   [...]
-   $ make test
-   $ make install
-
-   This will create a default install in /usr/local/ssl.
-
-   To build the MinGW version (native Windows) in Cygwin:
-
-   $ ./Configure mingw
-   [...]
-   $ make
-   [...]
-   $ make test
-   $ make install
-
- Cygwin Notes:
-
- "make test" and normal file operations may fail in directories
- mounted as text (i.e. mount -t c:\somewhere /home) due to Cygwin
- stripping of carriage returns. To avoid this ensure that a binary
- mount is used, e.g. mount -b c:\somewhere /home.
-
- GNU C (MinGW/MSYS)
- -------------
-
- * Compiler and shell environment installation:
-
-   MinGW and MSYS are available from http://www.mingw.org/, both are
-   required. Run the installers and do whatever magic they say it takes
-   to start MSYS bash shell with GNU tools on its PATH.
-
- * Compile OpenSSL:
-
-   $ ./config
-   [...]
-   $ make
-   [...]
-   $ make test
-
-   This will create the library and binaries in root source directory
-   and openssl.exe application in apps directory.
-
-   It is also possible to cross-compile it on Linux by configuring
-   with './Configure --cross-compile-prefix=i386-mingw32- mingw ...'. Other
-   possible targets include x86_64-w64-mingw32- and i686-w64-mingw32-.
-
-   libcrypto.a and libssl.a are the static libraries. To use the DLLs,
-   link with libeay32.a and libssl32.a instead.
-
- Linking your application
- ------------------------
-
- If you link with static OpenSSL libraries [those built with ms/nt.mak],
- then you're expected to additionally link your application with
- WS2_32.LIB, ADVAPI32.LIB, GDI32.LIB and USER32.LIB. Those developing
- non-interactive service applications might feel concerned about linking
- with the latter two, as they are justly associated with interactive
- desktop, which is not available to service processes. The toolkit is
- designed to detect in which context it's currently executed, GUI,
- console app or service, and act accordingly, namely whether or not to
- actually make GUI calls. Additionally those who wish to
- /DELAYLOAD:GDI32.DLL and /DELAYLOAD:USER32.DLL and actually keep them
- off service process should consider implementing and exporting from
- .exe image in question own _OPENSSL_isservice not relying on USER32.DLL.
- E.g., on Windows Vista and later you could:
-
-	__declspec(dllexport) __cdecl BOOL _OPENSSL_isservice(void)
-	{   DWORD sess;
-	    if (ProcessIdToSessionId(GetCurrentProcessId(),&sess))
-	        return sess==0;
-	    return FALSE;
-	}
-
- If you link with OpenSSL .DLLs, then you're expected to include into
- your application code small "shim" snippet, which provides glue between
- OpenSSL BIO layer and your compiler run-time. See the OPENSSL_Applink
- manual page for further details.

LICENSE

@@ -12,7 +12,7 @@
   ---------------
 
 /* ====================================================================
- * Copyright (c) 1998-2016 The OpenSSL Project.  All rights reserved.
+ * Copyright (c) 1998-2011 The OpenSSL Project.  All rights reserved.
  *
  * Redistribution and use in source and binary forms, with or without
  * modification, are permitted provided that the following conditions

MacOS/GUSI_Init.cpp

@@ -0,0 +1,62 @@
+/**************** BEGIN GUSI CONFIGURATION ****************************
+ *
+ * GUSI Configuration section generated by GUSI Configurator
+ * last modified: Wed Jan  5 20:33:51 2000
+ *
+ * This section will be overwritten by the next run of Configurator.
+ */
+
+#define GUSI_SOURCE
+#include <GUSIConfig.h>
+#include <sys/cdefs.h>
+
+/* Declarations of Socket Factories */
+
+__BEGIN_DECLS
+void GUSIwithInetSockets();
+void GUSIwithLocalSockets();
+void GUSIwithMTInetSockets();
+void GUSIwithMTTcpSockets();
+void GUSIwithMTUdpSockets();
+void GUSIwithOTInetSockets();
+void GUSIwithOTTcpSockets();
+void GUSIwithOTUdpSockets();
+void GUSIwithPPCSockets();
+void GUSISetupFactories();
+__END_DECLS
+
+/* Configure Socket Factories */
+
+void GUSISetupFactories()
+{
+#ifdef GUSISetupFactories_BeginHook
+	GUSISetupFactories_BeginHook
+#endif
+	GUSIwithInetSockets();
+#ifdef GUSISetupFactories_EndHook
+	GUSISetupFactories_EndHook
+#endif
+}
+
+/* Declarations of File Devices */
+
+__BEGIN_DECLS
+void GUSIwithDConSockets();
+void GUSIwithNullSockets();
+void GUSISetupDevices();
+__END_DECLS
+
+/* Configure File Devices */
+
+void GUSISetupDevices()
+{
+#ifdef GUSISetupDevices_BeginHook
+	GUSISetupDevices_BeginHook
+#endif
+	GUSIwithNullSockets();
+#ifdef GUSISetupDevices_EndHook
+	GUSISetupDevices_EndHook
+#endif
+}
+
+/**************** END GUSI CONFIGURATION *************************/

MacOS/GetHTTPS.src/CPStringUtils.hpp

@@ -0,0 +1,104 @@
+#pragma once
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+void CopyPStrToCStr(const unsigned char *thePStr,char *theCStr,const int maxCStrLength);
+void CopyPStrToPStr(const unsigned char *theSrcPStr,unsigned char *theDstPStr,const int maxDstStrLength);
+void CopyCStrToCStr(const char *theSrcCStr,char *theDstCStr,const int maxDstStrLength);
+void CopyCStrToPStr(const char *theSrcCStr,unsigned char *theDstPStr,const int maxDstStrLength);
+void ConcatPStrToCStr(const unsigned char *thePStr,char *theCStr,const int maxCStrLength);
+void ConcatPStrToPStr(const unsigned char *theSrcPStr,unsigned char *theDstPStr,const int maxDstStrLength);
+void ConcatCStrToPStr(const char *theSrcCStr,unsigned char *theDstPStr,const int maxDstStrLength);
+void ConcatCStrToCStr(const char *theSrcCStr,char *theDstCStr,const int maxCStrLength);
+
+void ConcatCharToCStr(const char theChar,char *theDstCStr,const int maxCStrLength);
+void ConcatCharToPStr(const char theChar,unsigned char *theDstPStr,const int maxPStrLength);
+
+int ComparePStrs(const unsigned char *theFirstPStr,const unsigned char *theSecondPStr,const Boolean ignoreCase = true);
+int CompareCStrs(const char *theFirstCStr,const char *theSecondCStr,const Boolean ignoreCase = true);
+int CompareCStrToPStr(const char *theCStr,const unsigned char *thePStr,const Boolean ignoreCase = true);
+
+Boolean CStrsAreEqual(const char *theFirstCStr,const char *theSecondCStr,const Boolean ignoreCase = true);
+Boolean PStrsAreEqual(const unsigned char *theFirstCStr,const unsigned char *theSecondCStr,const Boolean ignoreCase = true);
+
+void CopyLongIntToCStr(const long theNum,char *theCStr,const int maxCStrLength,const int numDigits = -1);
+void CopyUnsignedLongIntToCStr(const unsigned long theNum,char *theCStr,const int maxCStrLength);
+void ConcatLongIntToCStr(const long theNum,char *theCStr,const int maxCStrLength,const int numDigits = -1);
+void CopyCStrAndConcatLongIntToCStr(const char *theSrcCStr,const long theNum,char *theDstCStr,const int maxDstStrLength);
+
+void CopyLongIntToPStr(const long theNum,unsigned char *thePStr,const int maxPStrLength,const int numDigits = -1);
+void ConcatLongIntToPStr(const long theNum,unsigned char *thePStr,const int maxPStrLength,const int numDigits = -1);
+
+long CStrLength(const char *theCString);
+long PStrLength(const unsigned char *thePString);
+
+OSErr CopyCStrToExistingHandle(const char *theCString,Handle theHandle);
+OSErr CopyLongIntToExistingHandle(const long inTheLongInt,Handle theHandle);
+
+OSErr CopyCStrToNewHandle(const char *theCString,Handle *theHandle);
+OSErr CopyPStrToNewHandle(const unsigned char *thePString,Handle *theHandle);
+OSErr CopyLongIntToNewHandle(const long inTheLongInt,Handle *theHandle);
+
+OSErr AppendCStrToHandle(const char *theCString,Handle theHandle,long *currentLength = nil,long *maxLength = nil);
+OSErr AppendCharsToHandle(const char *theChars,const int numChars,Handle theHandle,long *currentLength = nil,long *maxLength = nil);
+OSErr AppendPStrToHandle(const unsigned char *thePString,Handle theHandle,long *currentLength = nil);
+OSErr AppendLongIntToHandle(const long inTheLongInt,Handle theHandle,long *currentLength = nil);
+
+void ZeroMem(void *theMemPtr,const unsigned long numBytes);
+
+char *FindCharInCStr(const char theChar,const char *theCString);
+long FindCharOffsetInCStr(const char theChar,const char *theCString,const Boolean inIgnoreCase = false);
+long FindCStrOffsetInCStr(const char *theCSubstring,const char *theCString,const Boolean inIgnoreCase = false);
+
+void CopyCSubstrToCStr(const char *theSrcCStr,const int maxCharsToCopy,char *theDstCStr,const int maxDstStrLength);
+void CopyCSubstrToPStr(const char *theSrcCStr,const int maxCharsToCopy,unsigned char *theDstPStr,const int maxDstStrLength);
+
+void InsertCStrIntoCStr(const char *theSrcCStr,const int theInsertionOffset,char *theDstCStr,const int maxDstStrLength);
+void InsertPStrIntoCStr(const unsigned char *theSrcPStr,const int theInsertionOffset,char *theDstCStr,const int maxDstStrLength);
+OSErr InsertCStrIntoHandle(const char *theCString,Handle theHandle,const long inInsertOffset);
+
+void CopyCStrAndInsertCStrIntoCStr(const char *theSrcCStr,const char *theInsertCStr,char *theDstCStr,const int maxDstStrLength);
+
+void CopyCStrAndInsertCStrsLongIntsIntoCStr(const char *theSrcCStr,const char **theInsertCStrs,const long *theLongInts,char *theDstCStr,const int maxDstStrLength);
+
+void CopyCStrAndInsert1LongIntIntoCStr(const char *theSrcCStr,const long theNum,char *theDstCStr,const int maxDstStrLength);
+void CopyCStrAndInsert2LongIntsIntoCStr(const char *theSrcCStr,const long long1,const long long2,char *theDstCStr,const int maxDstStrLength);
+void CopyCStrAndInsert3LongIntsIntoCStr(const char *theSrcCStr,const long long1,const long long2,const long long3,char *theDstCStr,const int maxDstStrLength);
+
+void CopyCStrAndInsertCStrLongIntIntoCStr(const char *theSrcCStr,const char *theInsertCStr,const long theNum,char *theDstCStr,const int maxDstStrLength);
+OSErr CopyCStrAndInsertCStrLongIntIntoHandle(const char *theSrcCStr,const char *theInsertCStr,const long theNum,Handle *theHandle);
+
+
+OSErr CopyIndexedWordToCStr(char *theSrcCStr,int whichWord,char *theDstCStr,int maxDstCStrLength);
+OSErr CopyIndexedWordToNewHandle(char *theSrcCStr,int whichWord,Handle *outTheHandle);
+
+OSErr CopyIndexedLineToCStr(const char *theSrcCStr,int inWhichLine,int *lineEndIndex,Boolean *gotLastLine,char *theDstCStr,const int maxDstCStrLength);
+OSErr CopyIndexedLineToNewHandle(const char *theSrcCStr,int inWhichLine,Handle *outNewHandle);
+
+OSErr ExtractIntFromCStr(const char *theSrcCStr,int *outInt,Boolean skipLeadingSpaces = true);
+OSErr ExtractIntFromPStr(const unsigned char *theSrcPStr,int *outInt,Boolean skipLeadingSpaces = true);
+
+
+void ConvertCStrToUpperCase(char *theSrcCStr);
+
+
+int CountOccurencesOfCharInCStr(const char inChar,const char *inSrcCStr);
+int CountWordsInCStr(const char *inSrcCStr);
+
+OSErr CountDigits(const char *inCStr,int *outNumIntegerDigits,int *outNumFractDigits);
+
+void ExtractCStrItemFromCStr(const char *inSrcCStr,const char inItemDelimiter,const int inItemNumber,Boolean *foundItem,char *outDstCharPtr,const int inDstCharPtrMaxLength,const Boolean inTreatMultipleDelimsAsSingleDelim = false);
+OSErr ExtractCStrItemFromCStrIntoNewHandle(const char *inSrcCStr,const char inItemDelimiter,const int inItemNumber,Boolean *foundItem,Handle *outNewHandle,const Boolean inTreatMultipleDelimsAsSingleDelim = false);
+
+
+OSErr ExtractFloatFromCStr(const char *inCString,extended80 *outFloat);
+OSErr CopyFloatToCStr(const extended80 *theFloat,char *theCStr,const int maxCStrLength,const int inMaxNumIntDigits = -1,const int inMaxNumFractDigits = -1);
+
+void SkipWhiteSpace(char **ioSrcCharPtr,const Boolean inStopAtEOL = false);
+
+
+#ifdef __cplusplus
+}
+#endif

MacOS/GetHTTPS.src/ErrorHandling.cpp

@@ -1,12 +1,12 @@
 /* ====================================================================
- * Copyright (c) 2015 The OpenSSL Project.  All rights reserved.
+ * Copyright (c) 1998-1999 The OpenSSL Project.  All rights reserved.
  *
  * Redistribution and use in source and binary forms, with or without
  * modification, are permitted provided that the following conditions
  * are met:
  *
  * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
+ *    notice, this list of conditions and the following disclaimer. 
  *
  * 2. Redistributions in binary form must reproduce the above copyright
  *    notice, this list of conditions and the following disclaimer in
@@ -51,98 +51,120 @@
  * Hudson (tjh@cryptsoft.com).
  *
  */
-#include <stdio.h>
-#include <assert.h>
-#include <string.h>
-#include <stdlib.h>
-#include <openssl/crypto.h>
+ 
+ 
+ 
+ #include "ErrorHandling.hpp"
+#include "CPStringUtils.hpp"
 
-static long sargl;
-static void *sargp;
-static int sidx;
+#ifdef __EXCEPTIONS_ENABLED__
+	#include "CMyException.hpp"
+#endif
 
-static void exnew(void *parent, void *ptr, CRYPTO_EX_DATA *ad,
-          int idx, long argl, void *argp)
+
+static char					gErrorMessageBuffer[512];
+
+char 						*gErrorMessage = gErrorMessageBuffer;
+int							gErrorMessageMaxLength = sizeof(gErrorMessageBuffer);
+
+
+
+void SetErrorMessage(const char *theErrorMessage)
 {
-    assert(idx == sidx);
-    assert(argl == sargl);
-    assert(argp == sargp);
+	if (theErrorMessage != nil)
+	{
+		CopyCStrToCStr(theErrorMessage,gErrorMessage,gErrorMessageMaxLength);
+	}
 }
 
-static int exdup(CRYPTO_EX_DATA *to, CRYPTO_EX_DATA *from,
-          void *from_d, int idx, long argl, void *argp)
+
+void SetErrorMessageAndAppendLongInt(const char *theErrorMessage,const long theLongInt)
 {
-    assert(idx == sidx);
-    assert(argl == sargl);
-    assert(argp == sargp);
-    return 0;
+	if (theErrorMessage != nil)
+	{
+		CopyCStrAndConcatLongIntToCStr(theErrorMessage,theLongInt,gErrorMessage,gErrorMessageMaxLength);
+	}
 }
 
-static void exfree(void *parent, void *ptr, CRYPTO_EX_DATA *ad,
-            int idx, long argl, void *argp)
+void SetErrorMessageAndCStrAndLongInt(const char *theErrorMessage,const char * theCStr,const long theLongInt)
 {
-    assert(idx == sidx);
-    assert(argl == sargl);
-    assert(argp == sargp);
+	if (theErrorMessage != nil)
+	{
+		CopyCStrAndInsertCStrLongIntIntoCStr(theErrorMessage,theCStr,theLongInt,gErrorMessage,gErrorMessageMaxLength);
+	}
+
 }
 
-typedef struct myobj_st {
-    CRYPTO_EX_DATA ex_data;
-    int id;
-} MYOBJ;
-
-static MYOBJ *MYOBJ_new()
+void SetErrorMessageAndCStr(const char *theErrorMessage,const char * theCStr)
 {
-    static int count = 0;
-    MYOBJ *obj = OPENSSL_malloc(sizeof(*obj));
-    int st;
-
-    obj->id = ++count;
-    st = CRYPTO_new_ex_data(CRYPTO_EX_INDEX_APP, obj, &obj->ex_data);
-    assert(st != 0);
-    return obj;
+	if (theErrorMessage != nil)
+	{
+		CopyCStrAndInsertCStrLongIntIntoCStr(theErrorMessage,theCStr,-1,gErrorMessage,gErrorMessageMaxLength);
+	}
 }
 
-static void MYOBJ_sethello(MYOBJ *obj, char *cp)
-{
-    int st;
 
-    st = CRYPTO_set_ex_data(&obj->ex_data, sidx, cp);
-    assert(st != 0);
+void AppendCStrToErrorMessage(const char *theErrorMessage)
+{
+	if (theErrorMessage != nil)
+	{
+		ConcatCStrToCStr(theErrorMessage,gErrorMessage,gErrorMessageMaxLength);
+	}
 }
 
-static char *MYOBJ_gethello(MYOBJ *obj)
+
+void AppendLongIntToErrorMessage(const long theLongInt)
 {
-    return CRYPTO_get_ex_data(&obj->ex_data, sidx);
+	ConcatLongIntToCStr(theLongInt,gErrorMessage,gErrorMessageMaxLength);
 }
 
-static void MYOBJ_free(MYOBJ *obj)
+
+
+char *GetErrorMessage(void)
 {
-    CRYPTO_free_ex_data(CRYPTO_EX_INDEX_APP, obj, &obj->ex_data);
-    OPENSSL_free(obj);
+	return gErrorMessage;
 }
 
-int main()
-{
-    MYOBJ *t1, *t2;
-    const char *cp;
-    char *p;
 
-    p = strdup("hello world");
-    sargl = 21;
-    sargp = malloc(1);
-    sidx = CRYPTO_get_ex_new_index(CRYPTO_EX_INDEX_APP, sargl, sargp,
-                                   exnew, exdup, exfree);
-    t1 = MYOBJ_new();
-    t2 = MYOBJ_new();
-    MYOBJ_sethello(t1, p);
-    cp = MYOBJ_gethello(t1);
-    assert(cp == p);
-    cp = MYOBJ_gethello(t2);
-    assert(cp == NULL);
-    MYOBJ_free(t1);
-    MYOBJ_free(t2);
-    free(sargp);
-    free(p);
-    return 0;
+OSErr GetErrorMessageInNewHandle(Handle *inoutHandle)
+{
+OSErr		errCode;
+
+
+	errCode = CopyCStrToNewHandle(gErrorMessage,inoutHandle);
+	
+	return(errCode);
 }
+
+
+OSErr GetErrorMessageInExistingHandle(Handle inoutHandle)
+{
+OSErr		errCode;
+
+
+	errCode = CopyCStrToExistingHandle(gErrorMessage,inoutHandle);
+	
+	return(errCode);
+}
+
+
+
+OSErr AppendErrorMessageToHandle(Handle inoutHandle)
+{
+OSErr		errCode;
+
+
+	errCode = AppendCStrToHandle(gErrorMessage,inoutHandle,nil);
+	
+	return(errCode);
+}
+
+
+#ifdef __EXCEPTIONS_ENABLED__
+
+void ThrowErrorMessageException(void)
+{
+	ThrowDescriptiveException(gErrorMessage);
+}
+
+#endif

MacOS/GetHTTPS.src/ErrorHandling.hpp

@@ -0,0 +1,147 @@
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#ifndef kGenericError
+	#define kGenericError		-1
+#endif
+
+extern char	*gErrorMessage;
+
+
+void SetErrorMessage(const char *theErrorMessage);
+void SetErrorMessageAndAppendLongInt(const char *theErrorMessage,const long theLongInt);
+void SetErrorMessageAndCStrAndLongInt(const char *theErrorMessage,const char * theCStr,const long theLongInt);
+void SetErrorMessageAndCStr(const char *theErrorMessage,const char * theCStr);
+void AppendCStrToErrorMessage(const char *theErrorMessage);
+void AppendLongIntToErrorMessage(const long theLongInt);
+
+
+char *GetErrorMessage(void);
+OSErr GetErrorMessageInNewHandle(Handle *inoutHandle);
+OSErr GetErrorMessageInExistingHandle(Handle inoutHandle);
+OSErr AppendErrorMessageToHandle(Handle inoutHandle);
+
+
+#ifdef __EXCEPTIONS_ENABLED__
+	void ThrowErrorMessageException(void);
+#endif
+
+
+
+//	A bunch of evil macros that would be unnecessary if I were always using C++ !
+
+#define SetErrorMessageAndBailIfNil(theArg,theMessage)								\
+{																					\
+	if (theArg == nil)																\
+	{																				\
+		SetErrorMessage(theMessage);												\
+		errCode = kGenericError;													\
+		goto EXITPOINT;																\
+	}																				\
+}
+
+
+#define SetErrorMessageAndBail(theMessage)											\
+{																					\
+		SetErrorMessage(theMessage);												\
+		errCode = kGenericError;													\
+		goto EXITPOINT;																\
+}
+
+
+#define SetErrorMessageAndLongIntAndBail(theMessage,theLongInt)						\
+{																					\
+		SetErrorMessageAndAppendLongInt(theMessage,theLongInt);						\
+		errCode = kGenericError;													\
+		goto EXITPOINT;																\
+}
+
+
+#define SetErrorMessageAndLongIntAndBailIfError(theErrCode,theMessage,theLongInt)	\
+{																					\
+	if (theErrCode != noErr)														\
+	{																				\
+		SetErrorMessageAndAppendLongInt(theMessage,theLongInt);						\
+		errCode = theErrCode;														\
+		goto EXITPOINT;																\
+	}																				\
+}
+
+
+#define SetErrorMessageCStrLongIntAndBailIfError(theErrCode,theMessage,theCStr,theLongInt)	\
+{																					\
+	if (theErrCode != noErr)														\
+	{																				\
+		SetErrorMessageAndCStrAndLongInt(theMessage,theCStr,theLongInt);			\
+		errCode = theErrCode;														\
+		goto EXITPOINT;																\
+	}																				\
+}
+
+
+#define SetErrorMessageAndCStrAndBail(theMessage,theCStr)							\
+{																					\
+	SetErrorMessageAndCStr(theMessage,theCStr);										\
+	errCode = kGenericError;														\
+	goto EXITPOINT;																	\
+}
+
+
+#define SetErrorMessageAndBailIfError(theErrCode,theMessage)						\
+{																					\
+	if (theErrCode != noErr)														\
+	{																				\
+		SetErrorMessage(theMessage);												\
+		errCode = theErrCode;														\
+		goto EXITPOINT;																\
+	}																				\
+}
+
+
+#define SetErrorMessageAndLongIntAndBailIfNil(theArg,theMessage,theLongInt)			\
+{																					\
+	if (theArg == nil)																\
+	{																				\
+		SetErrorMessageAndAppendLongInt(theMessage,theLongInt);						\
+		errCode = kGenericError;													\
+		goto EXITPOINT;																\
+	}																				\
+}
+
+
+#define BailIfError(theErrCode)														\
+{																					\
+	if ((theErrCode) != noErr)														\
+	{																				\
+		goto EXITPOINT;																\
+	}																				\
+}
+
+
+#define SetErrCodeAndBail(theErrCode)												\
+{																					\
+	errCode = theErrCode;															\
+																					\
+	goto EXITPOINT;																	\
+}
+
+
+#define SetErrorCodeAndMessageAndBail(theErrCode,theMessage)						\
+{																					\
+	SetErrorMessage(theMessage);													\
+	errCode = theErrCode;															\
+	goto EXITPOINT;																	\
+}
+
+
+#define BailNow()																	\
+{																					\
+	errCode = kGenericError;														\
+	goto EXITPOINT;																	\
+}
+
+
+#ifdef __cplusplus
+}
+#endif

MacOS/GetHTTPS.src/GetHTTPS.cpp

@@ -0,0 +1,209 @@
+/*
+ *	An demo illustrating how to retrieve a URI from a secure HTTP server.
+ *
+ *	Author: 	Roy Wood
+ *	Date:		September 7, 1999
+ *	Comments:	This relies heavily on my MacSockets library.
+ *				This project is also set up so that it expects the OpenSSL source folder (0.9.4 as I write this)
+ *				to live in a folder called "OpenSSL-0.9.4" in this project's parent folder.  For example:
+ *
+ *					Macintosh HD:
+ *						Development:
+ *							OpenSSL-0.9.4:
+ *								(OpenSSL sources here)
+ *							OpenSSL Example:
+ *								(OpenSSL example junk here)
+ *
+ *
+ *				Also-- before attempting to compile this, make sure the aliases in "OpenSSL-0.9.4:include:openssl" 
+ *				are installed!  Use the AppleScript applet in the "openssl-0.9.4" folder to do this!
+ */
+/* modified to seed the PRNG */
+/* modified to use CRandomizer for seeding */
+
+
+//	Include some funky libs I've developed over time
+
+#include "CPStringUtils.hpp"
+#include "ErrorHandling.hpp"
+#include "MacSocket.h"
+#include "Randomizer.h"
+
+//	We use the OpenSSL implementation of SSL....
+//	This was a lot of work to finally get going, though you wouldn't know it by the results!
+
+#include <openssl/ssl.h>
+#include <openssl/err.h>
+
+#include <timer.h>
+
+//	Let's try grabbing some data from here:
+
+#define kHTTPS_DNS		"www.apache-ssl.org"
+#define kHTTPS_Port		443
+#define kHTTPS_URI		"/"
+
+
+//	Forward-declare this
+
+OSErr MyMacSocket_IdleWaitCallback(void *inUserRefPtr);
+
+//	My idle-wait callback.  Doesn't do much, does it?  Silly cooperative multitasking.
+
+OSErr MyMacSocket_IdleWaitCallback(void *inUserRefPtr)
+{
+#pragma unused(inUserRefPtr)
+
+EventRecord		theEvent;
+	::EventAvail(everyEvent,&theEvent);
+	
+	CRandomizer *randomizer = (CRandomizer*)inUserRefPtr;
+	if (randomizer)
+		randomizer->PeriodicAction();
+
+	return(noErr);
+}
+
+
+//	Finally!
+
+void main(void)
+{
+	OSErr				errCode;
+	int					theSocket = -1;
+	int					theTimeout = 30;
+
+	SSL_CTX				*ssl_ctx = nil;
+	SSL					*ssl = nil;
+
+	char				tempString[256];
+	UnsignedWide		microTickCount;
+
+
+	CRandomizer randomizer;
+	
+	printf("OpenSSL Demo by Roy Wood, roy@centricsystems.ca\n\n");
+	
+	BailIfError(errCode = MacSocket_Startup());
+
+
+
+	//	Create a socket-like object
+	
+	BailIfError(errCode = MacSocket_socket(&theSocket,false,theTimeout * 60,MyMacSocket_IdleWaitCallback,&randomizer));
+
+	
+	//	Set up the connect string and try to connect
+	
+	CopyCStrAndInsertCStrLongIntIntoCStr("%s:%ld",kHTTPS_DNS,kHTTPS_Port,tempString,sizeof(tempString));
+	
+	printf("Connecting to %s....\n",tempString);
+
+	BailIfError(errCode = MacSocket_connect(theSocket,tempString));
+	
+	
+	//	Init SSL stuff
+	
+	SSL_load_error_strings();
+	
+	SSLeay_add_ssl_algorithms();
+	
+	
+	//	Pick the SSL method
+	
+//	ssl_ctx = SSL_CTX_new(SSLv2_client_method());
+	ssl_ctx = SSL_CTX_new(SSLv23_client_method());
+//	ssl_ctx = SSL_CTX_new(SSLv3_client_method());
+			
+
+	//	Create an SSL thingey and try to negotiate the connection
+	
+	ssl = SSL_new(ssl_ctx);
+	
+	SSL_set_fd(ssl,theSocket);
+	
+	errCode = SSL_connect(ssl);
+	
+	if (errCode < 0)
+	{
+		SetErrorMessageAndLongIntAndBail("OpenSSL: Can't initiate SSL connection, SSL_connect() = ",errCode);
+	}
+	
+	//	Request the URI from the host
+	
+	CopyCStrToCStr("GET ",tempString,sizeof(tempString));
+	ConcatCStrToCStr(kHTTPS_URI,tempString,sizeof(tempString));
+	ConcatCStrToCStr(" HTTP/1.0\r\n\r\n",tempString,sizeof(tempString));
+
+	
+	errCode = SSL_write(ssl,tempString,CStrLength(tempString));
+	
+	if (errCode < 0)
+	{
+		SetErrorMessageAndLongIntAndBail("OpenSSL: Error writing data via ssl, SSL_write() = ",errCode);
+	}
+	
+
+	for (;;)
+	{
+	char	tempString[256];
+	int		bytesRead;
+		
+
+		//	Read some bytes and dump them to the console
+		
+		bytesRead = SSL_read(ssl,tempString,sizeof(tempString) - 1);
+		
+		if (bytesRead == 0 && MacSocket_RemoteEndIsClosing(theSocket))
+		{
+			break;
+		}
+		
+		else if (bytesRead < 0)
+		{
+			SetErrorMessageAndLongIntAndBail("OpenSSL: Error reading data via ssl, SSL_read() = ",bytesRead);
+		}
+		
+		
+		tempString[bytesRead] = '\0';
+		
+		printf("%s", tempString);
+	}
+	
+	printf("\n\n\n");
+	
+	//	All done!
+	
+	errCode = noErr;
+	
+	
+EXITPOINT:
+
+	//	Clean up and go home
+	
+	if (theSocket >= 0)
+	{
+		MacSocket_close(theSocket);
+	}
+	
+	if (ssl != nil)
+	{
+		SSL_free(ssl);
+	}
+	
+	if (ssl_ctx != nil)
+	{
+		SSL_CTX_free(ssl_ctx);
+	}
+	
+	
+	if (errCode != noErr)
+	{
+		printf("An error occurred:\n");
+		
+		printf("%s",GetErrorMessage());
+	}
+	
+	
+	MacSocket_Shutdown();
+}

MacOS/GetHTTPS.src/MacSocket.h

@@ -0,0 +1,104 @@
+#pragma once
+
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+enum {
+    kMacSocket_TimeoutErr = -2
+};
+
+// Since MacSocket does busy waiting, I do a callback while waiting
+
+typedef OSErr(*MacSocket_IdleWaitCallback) (void *);
+
+// Call this before anything else!
+
+OSErr MacSocket_Startup(void);
+
+// Call this to cleanup before quitting
+
+OSErr MacSocket_Shutdown(void);
+
+// Call this to allocate a "socket" (reference number is returned in
+// outSocketNum)
+// Note that inDoThreadSwitching is pretty much irrelevant right now, since I
+// ignore it
+// The inTimeoutTicks parameter is applied during reads/writes of data
+// The inIdleWaitCallback parameter specifies a callback which is called
+// during busy-waiting periods
+// The inUserRefPtr parameter is passed back to the idle-wait callback
+
+OSErr MacSocket_socket(int *outSocketNum, const Boolean inDoThreadSwitching,
+                       const long inTimeoutTicks,
+                       MacSocket_IdleWaitCallback inIdleWaitCallback,
+                       void *inUserRefPtr);
+
+// Call this to connect to an IP/DNS address
+// Note that inTargetAddressAndPort is in "IP:port" format-- e.g.
+// 10.1.1.1:123
+
+OSErr MacSocket_connect(const int inSocketNum, char *inTargetAddressAndPort);
+
+// Call this to listen on a port
+// Since this a low-performance implementation, I allow a maximum of 1 (one!)
+// incoming request when I listen
+
+OSErr MacSocket_listen(const int inSocketNum, const int inPortNum);
+
+// Call this to close a socket
+
+OSErr MacSocket_close(const int inSocketNum);
+
+// Call this to receive data on a socket
+// Most parameters' purpose are obvious-- except maybe "inBlock" which
+// controls whether I wait for data or return immediately
+
+int MacSocket_recv(const int inSocketNum, void *outBuff, int outBuffLength,
+                   const Boolean inBlock);
+
+// Call this to send data on a socket
+
+int MacSocket_send(const int inSocketNum, const void *inBuff,
+                   int inBuffLength);
+
+// If zero bytes were read in a call to MacSocket_recv(), it may be that the
+// remote end has done a half-close
+// This function will let you check whether that's true or not
+
+Boolean MacSocket_RemoteEndIsClosing(const int inSocketNum);
+
+// Call this to see if the listen has completed after a call to
+// MacSocket_listen()
+
+Boolean MacSocket_ListenCompleted(const int inSocketNum);
+
+// These really aren't very useful anymore
+
+Boolean MacSocket_LocalEndIsOpen(const int inSocketNum);
+Boolean MacSocket_RemoteEndIsOpen(const int inSocketNum);
+
+// You may wish to change the userRefPtr for a socket callback-- use this to
+// do it
+
+void MacSocket_SetUserRefPtr(const int inSocketNum, void *inNewRefPtr);
+
+// Call these to get the socket's IP:port descriptor
+
+void MacSocket_GetLocalIPAndPort(const int inSocketNum, char *outIPAndPort,
+                                 const int inIPAndPortLength);
+void MacSocket_GetRemoteIPAndPort(const int inSocketNum, char *outIPAndPort,
+                                  const int inIPAndPortLength);
+
+// Call this to get error info from a socket
+
+void MacSocket_GetSocketErrorInfo(const int inSocketNum,
+                                  int *outSocketErrCode,
+                                  char *outSocketErrString,
+                                  const int inSocketErrStringMaxLength);
+
+
+#ifdef __cplusplus
+}
+#endif

MacOS/Randomizer.cpp

@@ -0,0 +1,476 @@
+/* 
+------- Strong random data generation on a Macintosh (pre - OS X) ------
+		
+--	GENERAL: We aim to generate unpredictable bits without explicit
+	user interaction. A general review of the problem may be found
+	in RFC 1750, "Randomness Recommendations for Security", and some
+	more discussion, of general and Mac-specific issues has appeared
+	in "Using and Creating Cryptographic- Quality Random Numbers" by
+	Jon Callas (www.merrymeet.com/jon/usingrandom.html).
+
+	The data and entropy estimates provided below are based on my
+	limited experimentation and estimates, rather than by any
+	rigorous study, and the entropy estimates tend to be optimistic.
+	They should not be considered absolute.
+
+	Some of the information being collected may be correlated in
+	subtle ways. That includes mouse positions, timings, and disk
+	size measurements. Some obvious correlations will be eliminated
+	by the programmer, but other, weaker ones may remain. The
+	reliability of the code depends on such correlations being
+	poorly understood, both by us and by potential interceptors.
+
+	This package has been planned to be used with OpenSSL, v. 0.9.5.
+	It requires the OpenSSL function RAND_add. 
+
+--	OTHER WORK: Some source code and other details have been
+	published elsewhere, but I haven't found any to be satisfactory
+	for the Mac per se:
+
+	* The Linux random number generator (by Theodore Ts'o, in
+	  drivers/char/random.c), is a carefully designed open-source
+	  crypto random number package. It collects data from a variety
+	  of sources, including mouse, keyboard and other interrupts.
+	  One nice feature is that it explicitly estimates the entropy
+	  of the data it collects. Some of its features (e.g. interrupt
+	  timing) cannot be reliably exported to the Mac without using
+	  undocumented APIs.
+
+	* Truerand by Don P. Mitchell and Matt Blaze uses variations
+	  between different timing mechanisms on the same system. This
+	  has not been tested on the Mac, but requires preemptive
+	  multitasking, and is hardware-dependent, and can't be relied
+	  on to work well if only one oscillator is present.
+
+	* Cryptlib's RNG for the Mac (RNDMAC.C by Peter Gutmann),
+	  gathers a lot of information about the machine and system
+	  environment. Unfortunately, much of it is constant from one
+	  startup to the next. In other words, the random seed could be
+	  the same from one day to the next. Some of the APIs are
+	  hardware-dependent, and not all are compatible with Carbon (OS
+	  X). Incidentally, the EGD library is based on the UNIX entropy
+	  gathering methods in cryptlib, and isn't suitable for MacOS
+	  either.
+
+	* Mozilla (and perhaps earlier versions of Netscape) uses the
+	  time of day (in seconds) and an uninitialized local variable
+	  to seed the random number generator. The time of day is known
+	  to an outside interceptor (to within the accuracy of the
+	  system clock). The uninitialized variable could easily be
+	  identical between subsequent launches of an application, if it
+	  is reached through the same path.
+
+	* OpenSSL provides the function RAND_screen(), by G. van
+	  Oosten, which hashes the contents of the screen to generate a
+	  seed. This is not useful for an extension or for an
+	  application which launches at startup time, since the screen
+	  is likely to look identical from one launch to the next. This
+	  method is also rather slow.
+
+	* Using variations in disk drive seek times has been proposed
+	  (Davis, Ihaka and Fenstermacher, world.std.com/~dtd/;
+	  Jakobsson, Shriver, Hillyer and Juels,
+	  www.bell-labs.com/user/shriver/random.html). These variations
+	  appear to be due to air turbulence inside the disk drive
+	  mechanism, and are very strongly unpredictable. Unfortunately
+	  this technique is slow, and some implementations of it may be
+	  patented (see Shriver's page above.) It of course cannot be
+	  used with a RAM disk.
+
+--	TIMING: On the 601 PowerPC the time base register is guaranteed
+	to change at least once every 10 addi instructions, i.e. 10
+	cycles. On a 60 MHz machine (slowest PowerPC) this translates to
+	a resolution of 1/6 usec. Newer machines seem to be using a 10
+	cycle resolution as well.
+	
+	For 68K Macs, the Microseconds() call may be used. See Develop
+	issue 29 on the Apple developer site
+	(developer.apple.com/dev/techsupport/develop/issue29/minow.html)
+	for information on its accuracy and resolution. The code below
+	has been tested only on PowerPC based machines.
+
+	The time from machine startup to the launch of an application in
+	the startup folder has a variance of about 1.6 msec on a new G4
+	machine with a defragmented and optimized disk, most extensions
+	off and no icons on the desktop. This can be reasonably taken as
+	a lower bound on the variance. Most of this variation is likely
+	due to disk seek time variability. The distribution of startup
+	times is probably not entirely even or uncorrelated. This needs
+	to be investigated, but I am guessing that it not a majpor
+	problem. Entropy = log2 (1600/0.166) ~= 13 bits on a 60 MHz
+	machine, ~16 bits for a 450 MHz machine.
+
+	User-launched application startup times will have a variance of
+	a second or more relative to machine startup time. Entropy >~22
+	bits.
+
+	Machine startup time is available with a 1-second resolution. It
+	is predictable to no better a minute or two, in the case of
+	people who show up punctually to work at the same time and
+	immediately start their computer. Using the scheduled startup
+	feature (when available) will cause the machine to start up at
+	the same time every day, making the value predictable. Entropy
+	>~7 bits, or 0 bits with scheduled startup.
+
+	The time of day is of course known to an outsider and thus has 0
+	entropy if the system clock is regularly calibrated.
+
+--	KEY TIMING: A  very fast typist (120 wpm) will have a typical
+	inter-key timing interval of 100 msec. We can assume a variance
+	of no less than 2 msec -- maybe. Do good typists have a constant
+	rhythm, like drummers? Since what we measure is not the
+	key-generated interrupt but the time at which the key event was
+	taken off the event queue, our resolution is roughly the time
+	between process switches, at best 1 tick (17 msec). I  therefore
+	consider this technique questionable and not very useful for
+	obtaining high entropy data on the Mac.
+
+--	MOUSE POSITION AND TIMING: The high bits of the mouse position
+	are far from arbitrary, since the mouse tends to stay in a few
+	limited areas of the screen. I am guessing that the position of
+	the mouse is arbitrary within a 6 pixel square. Since the mouse
+	stays still for long periods of time, it should be sampled only
+	after it was moved, to avoid correlated data. This gives an
+	entropy of log2(6*6) ~= 5 bits per measurement.
+
+	The time during which the mouse stays still can vary from zero
+	to, say, 5 seconds (occasionally longer). If the still time is
+	measured by sampling the mouse during null events, and null
+	events are received once per tick, its resolution is 1/60th of a
+	second, giving an entropy of log2 (60*5) ~= 8 bits per
+	measurement. Since the distribution of still times is uneven,
+	this estimate is on the high side.
+
+	For simplicity and compatibility across system versions, the
+	mouse is to be sampled explicitly (e.g. in the event loop),
+	rather than in a time manager task.
+
+--	STARTUP DISK TOTAL FILE SIZE: Varies typically by at least 20k
+	from one startup to the next, with 'minimal' computer use. Won't
+	vary at all if machine is started again immediately after
+	startup (unless virtual memory is on), but any application which
+	uses the web and caches information to disk is likely to cause
+	this much variation or more. The variation is probably not
+	random, but I don't know in what way. File sizes tend to be
+	divisible by 4 bytes since file format fields are often
+	long-aligned. Entropy > log2 (20000/4) ~= 12 bits.
+	
+--	STARTUP DISK FIRST AVAILABLE ALLOCATION BLOCK: As the volume
+	gets fragmented this could be anywhere in principle. In a
+	perfectly unfragmented volume this will be strongly correlated
+	with the total file size on the disk. With more fragmentation
+	comes less certainty. I took the variation in this value to be
+	1/8 of the total file size on the volume.
+
+--	SYSTEM REQUIREMENTS: The code here requires System 7.0 and above
+	(for Gestalt and Microseconds calls). All the calls used are
+	Carbon-compatible.
+*/
+
+/*------------------------------ Includes ----------------------------*/
+
+#include "Randomizer.h"
+
+// Mac OS API
+#include <Files.h>
+#include <Folders.h>
+#include <Events.h>
+#include <Processes.h>
+#include <Gestalt.h>
+#include <Resources.h>
+#include <LowMem.h>
+
+// Standard C library
+#include <stdlib.h>
+#include <math.h>
+
+/*---------------------- Function declarations -----------------------*/
+
+// declared in OpenSSL/crypto/rand/rand.h
+extern "C" void RAND_add (const void *buf, int num, double entropy);
+
+unsigned long GetPPCTimer (bool is601);	// Make it global if needed
+					// elsewhere
+
+/*---------------------------- Constants -----------------------------*/
+
+#define kMouseResolution 6		// Mouse position has to differ
+					// from the last one by this
+					// much to be entered
+#define kMousePositionEntropy 5.16	// log2 (kMouseResolution**2)
+#define kTypicalMouseIdleTicks 300.0	// I am guessing that a typical
+					// amount of time between mouse
+					// moves is 5 seconds
+#define kVolumeBytesEntropy 12.0	// about log2 (20000/4),
+					// assuming a variation of 20K
+					// in total file size and
+					// long-aligned file formats.
+#define kApplicationUpTimeEntropy 6.0	// Variance > 1 second, uptime
+					// in ticks  
+#define kSysStartupEntropy 7.0		// Entropy for machine startup
+					// time
+
+
+/*------------------------ Function definitions ----------------------*/
+
+CRandomizer::CRandomizer (void)
+{
+	long	result;
+	
+	mSupportsLargeVolumes =
+		(Gestalt(gestaltFSAttr, &result) == noErr) &&
+		((result & (1L << gestaltFSSupports2TBVols)) != 0);
+	
+	if (Gestalt (gestaltNativeCPUtype, &result) != noErr)
+	{
+		mIsPowerPC = false;
+		mIs601 = false;
+	}
+	else
+	{
+		mIs601 = (result == gestaltCPU601);
+		mIsPowerPC = (result >= gestaltCPU601);
+	}
+	mLastMouse.h = mLastMouse.v = -10;	// First mouse will
+						// always be recorded
+	mLastPeriodicTicks = TickCount();
+	GetTimeBaseResolution ();
+	
+	// Add initial entropy
+	AddTimeSinceMachineStartup ();
+	AddAbsoluteSystemStartupTime ();
+	AddStartupVolumeInfo ();
+	AddFiller ();
+}
+
+void CRandomizer::PeriodicAction (void)
+{
+	AddCurrentMouse ();
+	AddNow (0.0);	// Should have a better entropy estimate here
+	mLastPeriodicTicks = TickCount();
+}
+
+/*------------------------- Private Methods --------------------------*/
+
+void CRandomizer::AddCurrentMouse (void)
+{
+	Point mouseLoc;
+	unsigned long lastCheck;	// Ticks since mouse was last
+					// sampled
+
+#if TARGET_API_MAC_CARBON
+	GetGlobalMouse (&mouseLoc);
+#else
+	mouseLoc = LMGetMouseLocation();
+#endif
+	
+	if (labs (mLastMouse.h - mouseLoc.h) > kMouseResolution/2 &&
+	    labs (mLastMouse.v - mouseLoc.v) > kMouseResolution/2)
+		AddBytes (&mouseLoc, sizeof (mouseLoc),
+				kMousePositionEntropy);
+	
+	if (mLastMouse.h == mouseLoc.h && mLastMouse.v == mouseLoc.v)
+		mMouseStill ++;
+	else
+	{
+		double entropy;
+		
+		// Mouse has moved. Add the number of measurements for
+		// which it's been still. If the resolution is too
+		// coarse, assume the entropy is 0.
+
+		lastCheck = TickCount() - mLastPeriodicTicks;
+		if (lastCheck <= 0)
+			lastCheck = 1;
+		entropy = log2l
+			(kTypicalMouseIdleTicks/(double)lastCheck);
+		if (entropy < 0.0)
+			entropy = 0.0;
+		AddBytes (&mMouseStill, sizeof (mMouseStill), entropy);
+		mMouseStill = 0;
+	}
+	mLastMouse = mouseLoc;
+}
+
+void CRandomizer::AddAbsoluteSystemStartupTime (void)
+{
+	unsigned long	now;		// Time in seconds since
+					// 1/1/1904
+	GetDateTime (&now);
+	now -= TickCount() / 60;	// Time in ticks since machine
+					// startup
+	AddBytes (&now, sizeof (now), kSysStartupEntropy);
+}
+
+void CRandomizer::AddTimeSinceMachineStartup (void)
+{
+	AddNow (1.5);			// Uncertainty in app startup
+					// time is > 1.5 msec (for
+					// automated app startup).
+}
+
+void CRandomizer::AddAppRunningTime (void)
+{
+	ProcessSerialNumber PSN;
+	ProcessInfoRec		ProcessInfo;
+	
+	ProcessInfo.processInfoLength = sizeof (ProcessInfoRec);
+	ProcessInfo.processName = nil;
+	ProcessInfo.processAppSpec = nil;
+	
+	GetCurrentProcess (&PSN);
+	GetProcessInformation (&PSN, &ProcessInfo);
+
+	// Now add the amount of time in ticks that the current process
+	// has been active
+
+	AddBytes (&ProcessInfo, sizeof (ProcessInfoRec),
+			kApplicationUpTimeEntropy);
+}
+
+void CRandomizer::AddStartupVolumeInfo (void)
+{
+	short			vRefNum;
+	long			dirID;
+	XVolumeParam	pb;
+	OSErr			err;
+	
+	if (!mSupportsLargeVolumes)
+		return;
+		
+	FindFolder (kOnSystemDisk, kSystemFolderType, kDontCreateFolder,
+			&vRefNum, &dirID);
+	pb.ioVRefNum = vRefNum;
+	pb.ioCompletion = 0;
+	pb.ioNamePtr = 0;
+	pb.ioVolIndex = 0;
+	err = PBXGetVolInfoSync (&pb);
+	if (err != noErr)
+		return;
+		
+	// Base the entropy on the amount of space used on the disk and
+	// on the next available allocation block. A lot else might be
+	// unpredictable, so might as well toss the whole block in. See
+	// comments for entropy estimate justifications.
+
+	AddBytes (&pb, sizeof (pb),
+		kVolumeBytesEntropy +
+		log2l (((pb.ioVTotalBytes.hi - pb.ioVFreeBytes.hi)
+				* 4294967296.0D +
+			(pb.ioVTotalBytes.lo - pb.ioVFreeBytes.lo))
+				/ pb.ioVAlBlkSiz - 3.0));
+}
+
+/*
+	On a typical startup CRandomizer will come up with about 60
+	bits of good, unpredictable data. Assuming no more input will
+	be available, we'll need some more lower-quality data to give
+	OpenSSL the 128 bits of entropy it desires. AddFiller adds some
+	relatively predictable data into the soup.
+*/
+
+void CRandomizer::AddFiller (void)
+{
+	struct
+	{
+		ProcessSerialNumber psn;	// Front process serial
+						// number
+		RGBColor	hiliteRGBValue;	// User-selected
+						// highlight color
+		long		processCount;	// Number of active
+						// processes
+		long		cpuSpeed;	// Processor speed
+		long		totalMemory;	// Total logical memory
+						// (incl. virtual one)
+		long		systemVersion;	// OS version
+		short		resFile;	// Current resource file
+	} data;
+	
+	GetNextProcess ((ProcessSerialNumber*) kNoProcess);
+	while (GetNextProcess (&data.psn) == noErr)
+		data.processCount++;
+	GetFrontProcess (&data.psn);
+	LMGetHiliteRGB (&data.hiliteRGBValue);
+	Gestalt (gestaltProcClkSpeed, &data.cpuSpeed);
+	Gestalt (gestaltLogicalRAMSize, &data.totalMemory);
+	Gestalt (gestaltSystemVersion, &data.systemVersion);
+	data.resFile = CurResFile ();
+	
+	// Here we pretend to feed the PRNG completely random data. This
+	// is of course false, as much of the above data is predictable
+	// by an outsider. At this point we don't have any more
+	// randomness to add, but with OpenSSL we must have a 128 bit
+	// seed before we can start. We just add what we can, without a
+	// real entropy estimate, and hope for the best.
+
+	AddBytes (&data, sizeof(data), 8.0 * sizeof(data));
+	AddCurrentMouse ();
+	AddNow (1.0);
+}
+
+//-------------------  LOW LEVEL ---------------------
+
+void CRandomizer::AddBytes (void *data, long size, double entropy)
+{
+	RAND_add (data, size, entropy * 0.125);	// Convert entropy bits
+						// to bytes
+}
+
+void CRandomizer::AddNow (double millisecondUncertainty)
+{
+	long time = SysTimer();
+	AddBytes (&time, sizeof (time), log2l (millisecondUncertainty *
+			mTimebaseTicksPerMillisec));
+}
+
+//----------------- TIMING SUPPORT ------------------
+
+void CRandomizer::GetTimeBaseResolution (void)
+{	
+#ifdef __powerc
+	long speed;
+	
+	// gestaltProcClkSpeed available on System 7.5.2 and above
+	if (Gestalt (gestaltProcClkSpeed, &speed) != noErr)
+		// Only PowerPCs running pre-7.5.2 are 60-80 MHz
+		// machines.
+		mTimebaseTicksPerMillisec =  6000.0D;
+	// Assume 10 cycles per clock update, as in 601 spec. Seems true
+	// for later chips as well.
+	mTimebaseTicksPerMillisec = speed / 1.0e4D;
+#else
+	// 68K VIA-based machines (see Develop Magazine no. 29)
+	mTimebaseTicksPerMillisec = 783.360D;
+#endif
+}
+
+unsigned long CRandomizer::SysTimer (void)	// returns the lower 32
+						// bit of the chip timer
+{
+#ifdef __powerc
+	return GetPPCTimer (mIs601);
+#else
+	UnsignedWide usec;
+	Microseconds (&usec);
+	return usec.lo;
+#endif
+}
+
+#ifdef __powerc
+// The timebase is available through mfspr on 601, mftb on later chips.
+// Motorola recommends that an 601 implementation map mftb to mfspr
+// through an exception, but I haven't tested to see if MacOS actually
+// does this. We only sample the lower 32 bits of the timer (i.e. a
+// few minutes of resolution)
+
+asm unsigned long GetPPCTimer (register bool is601)
+{
+	cmplwi	is601, 0	// Check if 601
+	bne	_601		// if non-zero goto _601
+	mftb  	r3		// Available on 603 and later.
+	blr			// return with result in r3
+_601:
+	mfspr r3, spr5  	// Available on 601 only.
+				// blr inserted automatically
+}
+#endif

MacOS/Randomizer.h

@@ -0,0 +1,42 @@
+
+// Gathers unpredictable system data to be used for generating
+// random bits
+
+#include <MacTypes.h>
+
+class CRandomizer {
+ public:
+    CRandomizer(void);
+    void PeriodicAction(void);
+
+ private:
+
+    // Private calls
+
+    void AddTimeSinceMachineStartup(void);
+    void AddAbsoluteSystemStartupTime(void);
+    void AddAppRunningTime(void);
+    void AddStartupVolumeInfo(void);
+    void AddFiller(void);
+
+    void AddCurrentMouse(void);
+    void AddNow(double millisecondUncertainty);
+    void AddBytes(void *data, long size, double entropy);
+
+    void GetTimeBaseResolution(void);
+    unsigned long SysTimer(void);
+
+    // System Info
+    bool mSupportsLargeVolumes;
+    bool mIsPowerPC;
+    bool mIs601;
+
+    // Time info
+    double mTimebaseTicksPerMillisec;
+    unsigned long mLastPeriodicTicks;
+
+    // Mouse info
+    long mSamplePeriod;
+    Point mLastMouse;
+    long mMouseStill;
+};

MacOS/TODO

@@ -0,0 +1,18 @@
+-------------------------------------------------------------------
+Verify server certificate
+-------------------------------------------------------------------
+Currently omitted from the project:
+
+	crypto/tmdiff.c
+	crypto/bio/bss_conn.c
+	crypto/bio/b_sock.c
+	crypto/bio/bss_acpt.c
+	crypto/bio/bss_log.h
+
+-------------------------------------------------------------------
+Build libraries to link with...
+-------------------------------------------------------------------
+Port openssl application.
+-------------------------------------------------------------------
+BN optimizations (currently PPC version is compiled with BN_LLONG)
+-------------------------------------------------------------------

MacOS/_MWERKS_GUSI_prefix.h

@@ -0,0 +1,9 @@
+#include <MacHeaders.h>
+#define B_ENDIAN
+#ifdef __POWERPC__
+# pragma longlong on
+#endif
+#if 1
+# define MAC_OS_GUSI_SOURCE
+#endif
+#define MONOLITH

MacOS/_MWERKS_prefix.h

@@ -0,0 +1,9 @@
+#include <MacHeaders.h>
+#define B_ENDIAN
+#ifdef __POWERPC__
+# pragma longlong on
+#endif
+#if 0
+# define MAC_OS_GUSI_SOURCE
+#endif
+#define MONOLITH

MacOS/buildinf.h

@@ -0,0 +1,5 @@
+#ifndef MK1MF_BUILD
+# define CFLAGS        "-DB_ENDIAN"
+# define PLATFORM      "macos"
+# define DATE          "Sun Feb 27 19:44:16 MET 2000"
+#endif

MacOS/mklinks.as.hqx

@@ -0,0 +1,820 @@
+(This file must be converted with BinHex 4.0)
+
+:#QeVE'PZDh-ZBA-!39"36'&`E(3J!!!!!!!!!*LiI6m!!!!!!3!!!*G#!!#@3J!
+!!AChFQPd!!!!K3)"!3m(Fh9`F'pbG!!!!)B#!3%$"(0eFQ8!!!#(!J-%"!3("3C
+cGfPdBfJ!!!#)!J%"#39cH@jMD!!!!)N#"J%$!`-&"3-'FhPcG'9Y!!!!LJ)&"3)
+%!J8("!-#!`4dB@*X!!!!L`))!3-$!`-$!`-$"(4PE'`!!!#-!J)"#38$G'KP!!!
+!M3))(J)@!Ki#!J))!K)#!`)B!Kd%G'KPE3!!!)i#!J%&#`4dD'9j!!!!M`)#!J)
+#$3TdD(*[G@GSEh9d!!!!N!!#!3%&"(4TCQB!!!#4!J%"!`4dD@eP!!!!NJ)"!JS
+#!h4T!!!!'N!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!H!!!!!!!#!!!!!!
+!!!!!!!!!!!!!rrrrr`!!!$3!!!!N!!!!!#"[!!5JAb"[!!5K++!M6R9$9'mJFR9
+Z)(4SDA-JFf0bDA"d)'&`F'aTBf&dD@pZ,#"jEh8JEA9cG#"QDA*cG#"TER0dB@a
+X)%&`F'aP8f0bDA"d,J!!!)C8D'Pc)(0MFQP`G#"MFQ9KG'9c)#iZ,fPZBfaeC'8
+[Eh"PER0cE#"KEQ3JCQPXE(-JDA3JGfPdD#"ZC@0PFh0KFRNJB@aTBA0PFbi0$8P
+d)'eTCfKd)(4KDf8JB5"hD'PXC5"dEb"MEfe`E'9dC5"cEb"`E'9KFf8JBQ8JF'&
+dD@9ZG$SY+3!!!#S!!J!!!!!!$3!+!"!!!!!-!!!!!!!!!!!!63!0!!S!%!%!!!`
+!!!!!!!!!!!!B!!!!+!!!!!!!!!!)!!!!)!#N2c`!!DR`!!!!l!!!!!&19[ri,`0
+f!#m$-$bKVDG'*KmY52ri,`-`2+LITdBQ(b!ZrrLa`'FJ,`-J2'0`ER4"l[rm)NL
+KV5+)*Kp+3'B)5Ulrr'F#GJ%3!bBZrr41ANje6PB!!#m-@Bm[2%j29%Nr2!#!U"m
+SAb!-CJK`!cm!UFKJ+#m-UC)J9#!)d+J!'#&!!"JJ9#!)d+J!(#&!!"a9Mbm8)&q
+JAMk!9%mSE[rm6Pj1G8j@!!![$%kkre4+!'FU@Bm[2'&`E(3[2(0MF(4`)DJU+&m
+J$'F5@Bm[$#mm!!!!!A!!U#UTp&K26VVrG#KZrra1ANje!!!!('&`E(3!!!!"4P*
+&4J!!!!!!J%P$6L-!!!!!!*B!!!!"!!!!!!G"8&"-!!!!!!!"!!!"!!!!!S!!!!4
+!!!"i)!!!K"!!!3))!!)#"!!%"!)!#!J"!"!8!)!J)J"!3%%!)2#!J"#*!%!)KJ!
+J")3!)!*!!"!")!!3!K!!%!3)!"!)"!!J%!)!3#!"!)"!!S%!J!5#!3!)4!)!#%J
+%!!KB#!!%C"!!!m)J!!!"3!!!!)!!!!%!!!!$J!!!"m!!!(rJ!!$rm!!"rrJ!!rr
+m!!IrrJ!2rrm!(rrrJ$rrrm"rrrrJrrrrm2rrrrMrrrrmrrrrrRrrrrmrrrrq(rr
+rr!rrrrJ(rrr`!rrri!(rrm!$rrq!"rrr!!rrrJ!2rr`!$rri!!IRm!!$`q!!!!(
+!!!!!J!!!!!)!!!!!!!!!!!m!!!!!!!!!!!!!!!!!!!$`m!!!!!!!!!!!!!!!!!!
+2!!m!!!!!!!!!!!!!!!rrm!!!m!!!!!!!!!!!!!$`c0m!!!m!!!!!!!!!!!!2!!c
+-m!!!m!!!!!!!!!!!m!$-cI!!!!m!!!!!!!!!$`!-c0m!!!!!m!!!!!!!!2!!c-h
+`!!!!!!m!!!!!!!m!$-cIh`!!!!!!m!!!!!$`!-c0rGh`!!!!!!m!!!!2!!c-hph
+-h`!!!!!!m!!!rrr-cIhF`-h`!!!!!!m!!2lFr0rGc!`-h`!!!!!!m!$pc-rph-$
+!`-h`!!!!!!m!r-`2cF`-$!!-r3!!!!!!m!m!`-c!`-!!$0m!!!!!$-m!m!`-$!`
+!!-cI!!!!!-c`!!m!`-$!!!`-h`!!!!c2!!!!m!`-!!$!c0m!!!$-m!!!!!m!`!!
+-$-hm!!!-c`!!!!!!m!!!`-cIc!!!c2!!!!!!!!m!$!c0r-`!$-m!!!!!!!$pm-$
+-hmc!!-c`!!!!!!!2hI`-cIc-!!c2!!!!!!!!rGc2c0r-`!$-m!!!!!!!!2h-cmh
+mc!!-c`!!!!!!!!$mc!rIr-!!c2!!!!!!!!!!$m$2m!r-$-m!!!!!!!!!!!$rr`!
+!r-c`!!!!!!!!!!!!!!!!!!r2!!!!!!!!!!!!!!!!!!!!m!!!!!!!!!!!!!"!!B!
+13"%J)4"##18%Q)+3!%&!)5!L%%3BL#83*L!G3!#!!B!2`"rJ2r"rq2rmrrlrrhr
+r2riIr"ri2r!ri"h!!)!!!!#!!!!!$r!!!!!!!2r`$`!!!!!2$!m!m!!!!2$!c`!
+2!!!2$!c`!!$`!2r`cpm!!!m!rGrpc2!!!2$p$p`-c`!!$`m!`-$0m!$2!2!-$-h
+`$2!!$`$-hm$2!!!2m-hm$2!!!2h2hm$2!!!!r-rm$2!!!!!2r`r2!!!!!!!!!2!
+!!!!!!!#D8f0bDA"d)%&`F'aTBf&dD@pZ$3e8D'Pc)(0MFQP`G#"MFQ9KG'9c)#i
+Z,fPZBfaeC'8[Eh"PER0cE#"KEQ3JCQPXE(-JDA3JGfPdD#"ZC@0PFh0KFRNJB@a
+TBA0PFbi0$8Pd)'eTCfKd)(4KDf8JB5"hD'PXC5"dEb"MEfe`E'9dC5"cEb"`E'9
+KFf8JBQ8JF'&dD@9ZG$SY+3!!!")!!J!!!!!!!!!!!!%!"J!'%iN!!!!+@1!!!b!
+!!!-J!!!!!"3!+`!(!Cm#@!!V!!F"f!*B!!!!!3!!M`C'BA0N98&6)$%Z-6!a,M%
+`$J!!!!32rrm!!3!#!!-"rrm!!!d!!3!"D`!!!!!!!!!%!J!%!!)!"3!'$3!&!!*
+X!!)!!!U`!!IrrJd!"`!#6`!!!!!+X!!)!!N0!!J!!@X!!!!%#Um!#J)!#J!#!!X
+!$!d!#`!#E!!#!!3!"2rprr`"rrd!!!(rr!!!!J!-!!)!$3!1$3!0!!*X!!%!"!!
+%rrX!$`(rq`!!$!!2!&N!8b"(CA3JF'&dD#"dEb"dD'Pc)%&`F'aP8f0bDA"d)'&
+`F'aPG$XJGA0P)'Pd)(4[)'C[FQdJG'KP)("KG'JJG'mJG'KP)'PZBfaeC'8JCQp
+XC'9b!!)!!!)!$J!#!"!!%3d!%!!#E!!"!!3!"2rk!")"rrS!!!`!%J!Q!#!JB@j
+N)(4SC5"[G'KPFL"bC@aPGQ&ZG#"QEfaNCA*c,J!#!!!#!"%!!J!6!"30!"-!!R-
+!!!!%!"%!&3!@$3!9!!*M!!!!"!!1!"F!'!d!&`!#E!!&!!3!$!!CrrN0!"N!!Qi
+!!!!%!!`!'J!E$3!D!!)d!!!!"3!-rrJ!(!Vrq!!%#Q0[BQS0!"`!!Q`!"3!'!!X
+!(Irh$3!G!!0*!!)!"J!,rrB!([re#[rf!"JZC@&bFfCQC(*KE'Pc!!!!!!!!)!"
+KCQ4b$3!H!!"Q!!!!"J!(![re!!!"rrF!!!d!'`!"E3!!!!3!"3!I$`!I!6J)ER9
+XE!!!!!!!!Gq!rrm!!!!A"NCTEQ4PFJ!!(`*[Me!!ASfm!Qq,i!"HA[!!I&M!!!!
+!!!!!'mi!!JN#!Qq-1!!!Kb%#Ei`J!!!!!%C14&*038e"3e-!!"%!B@aTF`!!!!!
+!fJ!#!!!-6@&MD@jdEh0S)%K%!!!!!!!!!!!!!!!!!!!!XSA5h%*%!!!!!!!A"NC
+TEQ4PFJ!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
+!!!!!!!!!!!!!!!!!!!!!3rLc#@a!4Nj%8Ne"3e2rrrrr!!!!!!!!!!!!!!!!!!!
+!!!!!!!e6HA0dC@dJ4QpXC'9b!!!"!!3!!!!A!!)!)8eKBfPZG'pcD#")4$T6HA0
+dC@dJ4QpXC'9b1NCTEQ4PFJ$rr`!!!Irj!!!0!"J!!@d!!!!-!!hrp!Vrp!!%#Q0
+dH(30!"B!!@m!!!!!!!$rm`[rm`!5-!!(G'KPF'&dD!!(G'KP8'&dD!)!&!!#!#!
+!)3d!)!!#E!!#!")!%[rbrr%"rr)!!!(rm3!!!J!K!!)!)J!M$3!L!!*b!!!!%J!
+A!#3!*3d!*!!#EJ!$!")!&3!Q!#F0!#B!!6%!!!!6!"Arm!Vrm!!%#R4iC'`0!#F
+!!6%!!!!5!"2rl`Vrl`!%#Q&cBh)0!#8!!@m!!!!!!!$rlJ[rlJ!F-!!-G'KPEfa
+NC'9XD@ec!!adD'92E'4%C@aTEA-#!#-!!J!S!#N0!#J!!R)!!!!B!"d!+J!V$3!
+U!!&Y!!!!'!!C!#`-!#`!"`!"1J!#!!!0!#X!!Qi!!`!!!!!!,3!Z$3!Y!!%a!!!
+!'J!Frqd+rqd!"!TdH'4X$3!Z!!%a!!!!'3!Drq`+rq`!"!TKFf0b!J!T!!)!,`!
+`$3![!!*X!!)!(J!Hrq[rkJ(rk`!!!IrU!!!#!$!!!J!a!$)0!$%!!R)!!!!H!#X
+!-`!d$3!c!!*X!!8!(J!T!$Ark3d!03!#EJ!!!"i!+3!f!$F0!$B!!cF"!!!I!#R
+rk!!i!$N+rqJ!"!TMDA4Y$3!i!!&Y!!!!)`!PrqF$rqF!!3d!13!"E3!!!#B!+2r
+Q!rrQrrd0!$F!!@m!!!!H!"rrj3[rj3!5-!!(G'KPF'&dD!!(G'KP8'&dD!(rk3!
+!$3!d!!&[!!!!!!!!rq3,rq3!)$!!$R4SCA"bEfTPBh4`BA4S!!jdD'93FQpUC@0
+d8'&dD!)!-J!#!$S!1`d!1J!#FJ!!!#`!1`!m!$d0!$`!!Q-!!!!X!$N!2J!r$3!
+q!!*X!!8!,!!h!%$ri`d!3!!#EJ!!!#`!0`""!%)0!%%!!cF"!!!Y!$IriJ"$!%3
++rq)!"!TMDA4Y$3"$!!&Y!!!!-3!crq%$rq%!!3d!4!!"E3!!!$3!0[rJ!rrJrri
+0!%)!!@m!!!!X!#hrh`[rh`!5-!!(G'KPF'&dD!!(G'KP8'&dD!(ri`!!$3!r!!&
+Y!!!!0`!irpi+rpi!"!T849K8$3!p!!&[!!!!!!!!rpd,rpd!&M!!#A4SC@ePF'&
+dD!!*G'KP6@93BA4S!J!l!!)!43"'$3"&!!*X!!)!2!!mrpcrf`(rh!!!!IrE!!!
+#!%B!!J"(!%J0!%F!!R)!!!!m!%8!53"+$3"*!!*M!!!!2!""!%X!6!d!5`!#BJ!
+!!$`!2`"0!%i0!%d!!@m!!!!m!$hrfJ[rfJ!J-!!1G'KPF(*[DQ9MG("KG'J!$R4
+SC9"bEfTPBh43BA4S$3"1!!&Y!!!!23!q!%m-!%m!$3!(D@jME(9NC3!#!!!0!%`
+!!@d!!!!r!%$rf3Vrf3!%#P4&@&30!%S!!@m!!!!!!!$rf![rf!!Q-!!4D@jME(9
+NC@C[E'4PFR"KG'J!%@PZBfaeC'9'EfaNCA*3BA4S!J")!!)!8!"4$3"3!!*b!!!
+!4J"9!&)!8`d!8J!#B`!!!%B!83"8!&80!&3!!Q)!!!"'!%m!9J"A$3"@!!*L!!!
+!4J",!&J!@3d!@!!"E`!!!%B!4rrA#rrA!#!`!!jdD'9`FQpUC@0dF'&dD!!1G'K
+P8(*[DQ9MG&"KG'J0!&N!!@d!!!"(!%S!@J`!@J!0!!GTEQ0XG@4P!!)!!!d!9`!
+"E3!!!%X!6J"E$!"E!!d!"fp`C@jcFf`!!J!!$3"9!!&Y!!!!6`"3rpB+rpB!"!T
+849K8$3"6!!&[!!!!!!!!rp8,rp8!0$!!''p`C@jcFfaTEQ0XG@4PCQpXC'9bF'&
+dD!!BEh"PEP066%PZBfaeC'9'EfaNCA*3BA4S!J"4!!)!A!"G$3"F!!*b!!!!9J"
+K!&i!A`d!AJ!#B`!!!&B!A3"J!'%0!'!!!Q)!!!"@!&X!BJ"M$3"L!!&[!!!!9J"
+Arp3,rp3!)$!!$R4SCA"bEfTPBh4`BA4S!!jdD'93FQpUC@0d8'&dD!d!B`!"E3!
+!!&F!@J"N$!"N!!`!"Q0bHA"dE`!#!!!0!'%!!@d!!!"E!&crd`Vrd`!%#P4&@&3
+0!&m!!@m!!!!!!!$rdJ[rdJ!N-!!3Bh*jF(4[CQpXC'9bF'&dD!!3Bh*jF(4[4Qp
+XC'9b8'&dD!)!A3!#!'8!CJd!C3!#FJ!!!')!E3"R!'J0!'F!!Q-!!!"L!'N!D3"
+U$3"T!!*L!!!!BJ"R!'X!E!d!D`!"E`!!!')!Brr4#rr4!#!`!!jdD'9`FQpUC@0
+dF'&dD!!1G'KP8(*[DQ9MG&"KG'J0!'`!!@d!!!"M!'B!E3`!E3!*!!0cFf`!!J!
+!$3"U!!&Y!!!!C`"Srp!+rp!!"!T849K8$3"S!!&[!!!!!!!!rmm,rmm!(M!!$A0
+cE'C[E'4PFR"KG'J!$A0cE%C[E'4PFP"KG'J#!'B!!J"Z!'m0!'i!!R)!!!"Z!(8
+!F!"a$3"`!!*M!!!!EJ"a!()!F`d!FJ!"E`!!!'i!Err1#rr1!#!`!!jdD'9`FQp
+UC@0dF'&dD!!1G'KP8(*[DQ9MG&"KG'J0!(-!!@d!!!"[!($rc3Vrc3!%#P4&@&3
+0!(%!!@m!!!!!!!$rc![rc!!Q-!!4Eh"PER0cE'C[E'4PFR"KG'J!%@p`C@jcFfa
+'EfaNCA*3BA4S!J"[!!)!G!"e$3"d!!*X!!)!GJ"frm[rbJ(rb`!!!Ir+!!!#!(8
+!!J"f!(F0!(B!!R)!!!"f!(X!H!"j$3"i!!&[!!!!GJ"hrmN,rmN!($!!$(4SC@p
+XC'4PE'PYF`!-G'KP6faN4'9XD@ec$3"j!!*Z!!-!!!!!!(S!H`d!HJ!"-3!!!(J
+!H[r)#[r)!!3+G(KNE!d!H`!"-3!!!(F!H2r(#[r(!!3+BA0MFJ)!G`!#!(`!I3d
+!I!!#E!!#!(`!I2r'rm8"rmB!!!(ra3!!!J"p!!)!IJ"r$3"q!!*X!!%!I!"mrm3
+!J!(ra!!!$!#!!%!!1L"NC@aPG'8JEfaN)'PZBfaeC'8kEh"PER0cE#"QEfaNCA)
+JB@jN)(*PBh*PBA4P)'Pd)'0XC@&ZE(N!!J!!!J"r!!)!J3##$3#"!!*X!!)!I!"
+mrm2r`J(r``!!!Ir#!!!#!))!!J#$!)30!)-!!e%!!!"m!+8!K3#'!)F0!)8!!@X
+!!!"r!*`!L!)!L!!#!)N!LJd!L3!$53!#!(m!N[r"!)[r`!Vr`3!B,QeTFf0cE'0
+d+LSU+J!!!!!!!*!!!#SU+LS0!)X!!Qi!!!"r!)i!M!#0$3#-!!)d!!!!K`#1rlm
+!MJVr[`!%#Q0QEf`0!)i!!@d!!!#+!)d!M``!M`!0!!G[F'9ZFh0X!!)!!!d!M3!
+#0!!!!(m!Krqq!*!!#[qq!!3+BfC[E!d!N!!!!@m!!!#$!)Er[3[r[3!Q-!!4D@j
+ME(9NC@C[E'4PFR"KG'J!%@PZBfaeC'9'EfaNCA*3BA4S![r!!!!#!)S!!J#4rl`
+0!*%!!dN!!J#6!*crZ`#5rlS+rlX!'#jMEh*PC'9XEbSU+LS!!!!!!!#3!!!U+LS
+U$3#5!!%a!!!!N`#BrlN+rlN!"!TcC@aP![qk!!!#rl`!!!d!KJ!$8J!!!!!!!2q
+irlIrYJVrZ!!B,Q&cBh*PFR)J+LSU+J!!!!!!!*!!!#SU+LS"rlF!!!,rYJ!!$3#
+(!!*X!!%!T!#Nrl8!N`(rY3!!$!#6!"-!$5"TCfj[FQ8JCA*bEh)!!J!!!J#%!!)
+!P!#9$3#8!!*X!!)!TJ#Qrl6rX`(rY!!!!Iqc!!!#!*8!!J#@!*F0!*B!!dN!!J#
+Q!,lrX[qa!*J+rl)!'#jMEh*PBh*PE#SU+LS!!!!!!!#3!!"ZG@aX!Iqa!!!'!*J
+!!rq`!*N!QJVrX!!%#QY[Bf`0!*N!!@d!!!#U!+hrV`VrV`!%#Q0QEf`'!*S!!rq
+Z!*[rV3VrVJ!%#QPZFfJ0!*X!!M3!!!#`!,MrV!#F#[qX!!3+BfC[E!d!R!!"E`!
+!!,3!YrqV#rqV!#B`!"&TEQ0XG@4PCQpXC'9bF'&dD!!4D@jME(9NC8C[E'4PFP"
+KG'J'rkd!!!)!P`!#!*d!RJd!R3!#FJ!!!,m!aJ#I!+!0!*m!!Q`"!!#r!-)!SIq
+U$3#K!!%a!!!![`$#rkN+rkN!"!TbFfad!IqU!!!0!+!!!@m!!!!!!!$rU![rU!!
+Z-!!9G'KPEQ9hCQpXC'9bFQ9QCA*PEQ0P!"9dD'91CAG'EfaNCA*5C@CPFQ9ZBf8
+#!*i!!J#L!+-0!+)!!dN!!J$(!-lrT`#NrkB+rkF!'#jYDA0MFfaMG#SU+LS!!!!
+!!!#3!!!U+LSU$3#N!!&[!!!!a`$+rk8,rk8!,M!!&A4SC@jPGfC[E'4PFR*PCQ9
+bC@jMC3!9G'KP6Q9h4QpXC'9b8Q9QCA*PEQ0P![qQ!!!#!+-!!J#P!+B0!+8!!R)
+!!!$2!0`!T`#S$3#R!!&Y!!!!c`$5!+N-!+N!$3!(Eh"PER0cE!!#!!!0!+J!!Qi
+!!!!!!!!!UJ#V$3#U!!%a!!!!e`$Erk3+rk3!"!T`EQ&Y$3#V!!%a!!!!dJ$Ark-
++rk-!"!TcC@aP!J#Q!!)!V!#Y$3#X!!*X!!)!h3$Grk,rS3(rSJ!!!IqK!!!#!+d
+!!J#Z!+m0!+i!!Q`!!3$G!0hrS!#`!IqJ!!!-!,!!(`!C)&0dBA*d)'eKDfPZCb"
+dD'8JB@aTBA0PF`!#!!!#!+m!!J#a!,)0!,%!!dN!!J$G!3ArRrqH!,-+rjm!'#j
+MEh*PBh*PE#SU+LS!!!!!!!#3!!"ZG@aX!IqH!!!'!,-!!rqG!,3!Y3VrR3!%#QY
+[Bf`0!,3!!@d!!!$K!16rR!VrR!!%#Q&XD@%'!,8!!rqE!,B!Y`VrQ`!%#QPZFfJ
+0!,B!!M3!!!$R!1rrQJ#i#[qD!!3+BfC[E!d!Z!!"E`!!!1X!l[qC#rqC!$3`!"K
+[F'9ZFh0XD@jME(9NC@C[E'4PFR"KG'J!''p`C@j68da*EQ0XG@4P4QpXC'9b8'&
+dD!B!Y`!$rjJ!ZIqA#[qB!!3+G'mJ)!d!Z3!#EJ!!!2)!r`#k!,X0!,S!!M3!!!$
+i!2rrPJ#m#[q@!!3+CQPXC3d![!!"E3!!!2X!rJ#p$!#p!"-!$@p`C@jcFfaMEfj
+Q,QJ!!J!!$3#l!!)d!!!!mJ$irj8![JVrP3!%#Q0QEf`0!,i!!@m!!!$f!2IrP![
+rP!!@-!!*G'KPE@9`BA4S!!PdD'90C9"KG'J'rjF!!!)!XJ!#!,m!`!d![`!#E!!
+#!3B""[q6rj)"rj-!!!(rNJ!!!J$!!!)!`3$#$3$"!!*b!!!""J%4!--!a!d!``!
+#BJ!!!3B"$3$&!-B0!-8!!@m!!!%'!3RrN3[rN3!N-!!3Bh*jF(4[CQpXC'9bF'&
+dD!!3Bh*jF(4[4QpXC'9b8'&dD!d!aJ!"E3!!!3N"$!$($!$(!!X!"6TKFfia!!)
+!!!d!a!!"E`!!!!!!!2q3!![rN!!!&$!!#(4PEA"`BA4S!!KdC@e`8'&dD!)!`J!
+#!-J!b3d!b!!$53!#!4)"22q2rii!bJVrM`!B,Q0[FQ9MFQ9X+LSU+J!!!!!!!*!
+!!'jeE'`"rii!!!B!bJ!$rid!b`$-#[q0!!3+DfpME!d!b`!"E3!!!4B"'Iq-#[q
+-!!3+B@aTB3B!c!!$riX!c3$1#[q,!!3+D@jcD!d!c3!#0!!!!4`"*2q+!-m+riS
+!"!TMCQpX$3$2!!&[!!!")!%MriN,riN!0$!!''p`C@jcFfaTEQ0XG@4PCQpXC'9
+bF'&dD!!BEh"PEP066%PZBfaeC'9'EfaNCA*3BA4S"J$1!!2rL!$3riF+riJ!"!T
+dEb!J$3$3!!*Z!!!"*`%f!0%!dJd!d3!#0!!!!5m"0[q'!0-+riB!"!TQD@aP$3$
+6!!&Y!!!"-J%e!03-!03!$!!'BA0Z-5jS!!)!!!d!dJ!#0!!!!5F",rq&!08+ri8
+!"!TMCQpX$3$9!!&[!!!"+`%Zri3,ri3!&$!!#(4PEA"`BA4S!!KdC@e`8'&dD!E
+rK`!!!J$*!!)!eJ$A$3$@!!0*!!)"23&Rri2rJJ$B#[q$!"JZBfpbC@0bC@`U+LS
+U!!!!!!!!N!!!ER9XE!(rJJ!!"J$B!!2rJ3$C!0S+ri%!"!TVEf0X$3$C!!&Y!!!
+"33&%ri!+ri!!"!TKE'PK"J$D!!2rI`$E!0`+rhm!"!TTER0S$3$E!!)d!!!"4`&
+2rhi!h3VrIJ!%#Q0QEf`0!0d!!@m!!!&,!8lrI3[rI3!d-!!BEh"PER0cE'PZBfa
+eC'9QEfaNCA*`BA4S!"K[F'9Z8e0-5@jME(9NC8C[E'4PFP"KG'J'!0`!!rpm!0l
+rH`VrI!!%#R4[)#!0!0i!!Qi!!!&5!@%!h`$J$3$I!!)d!!!"@J&KrhS!i3VrHJ!
+%#QCTE'80!1%!!@d!!!&G!@!!iJ`!iJ!3!!TKFfiaAfeKBbjS!!)!!!d!i!!#0!!
+!!9)"@[pj!1-+rhN!"!TMCQpX$3$M!!&[!!!"9J&CrhJ,rhJ!&$!!#(4PEA"`BA4
+S!!KdC@e`8'&dD!ErH`!!!J$A!!)!j!$P$3$N!!*X!!)"D!&SrhIrGJ(rG`!!!Ip
+f!!!#!18!!J$Q!1F0!1B!!R)!!!&S!A-!k!$T$3$S!!*L!!!"D!&[!1S!k`d!kJ!
+"E`!!!@J"Drpe#rpe!#3`!""MFRP`G'pQEfaNCA*`BA4S!""MFRP`G'p'EfaNCA*
+3BA4S$3$V!!&Y!!!"D`&Z!1`-!1`!#J!%1Q*TE`!#!!!0!1N!!@m!!!!!!!$rG![
+rG!!8-!!)G'9YF("KG'J!#(4PEA"3BA4S!J$R!!)!l3$Z$3$Y!!0*!!)"G!'Hrh2
+rFJ$[#[pc!"JZBfpbC@0bC@`U+LSU!!!!!!!!N!!!ER9XE!(rFJ!!"J$[!!2rF3$
+`!2%+rh%!"!TVEf0X$3$`!!&Y!!!"H!&lrh!+rh!!"!TKE'PK"J$a!!2rE`$b!2-
++rfm!"!TTER0S$3$b!!)d!!!"IJ''rfi!p!VrEJ!%#Q0QEf`0!23!!@m!!!'#!BA
+rE3[rE3!d-!!BEh"PER0cE'PZBfaeC'9QEfaNCA*`BA4S!"K[F'9Z8e0-5@jME(9
+NC8C[E'4PFP"KG'J'!2-!!rpX!2ArD`VrE!!%#R4[)#!0!28!!Qi!!!'*!CJ!pJ$
+h$3$f!!)d!!!"N3'BrfS!q!VrDJ!%#QCTE'80!2J!!@d!!!'8!CF!q3`!q3!,!!9
+LD@mZD!!#!!!0!2F!!M3!!!'*!C(rD3$k#[pT!!3+BfC[E!d!qJ!"E`!!!Bd"N!$
+rD![rD!!8-!!)G'9YF("KG'J!#(4PEA"3BA4S"[pV!!!#!1i!!J$l!2`0!2X!!Q`
+!!J'I!CrrCrpQ!IpR!!!"rfB!!!)!r!!#!2d!rJd!r3!#FJ!!!Cm"UJ$r!3!0!2m
+!!Q)!!!'I!DB"!3%#$3%"!!&[!!!"R`'Lrf8,rf8!*$!!%'0bHA"dEfC[E'4PFR"
+KG'J!%'0bHA"dEdC[E'4PFP"KG'J0!3)!!@d!!!'L!D8"!``"!`!*!!-kBQB!!J!
+!$3%!!!&[!!!!!!!!rf3,rf3!&$!!#(4PEA"`BA4S!!KdC@e`8'&dD!)!rJ!#!33
+""3d""!!$53!#!DX"eIpMrf)""JVrB`!B,Q0[FQ9MFQ9X+LSU+J!!!!!!!*!!!'j
+eE'`"rf)!!!B""J!$rf%""`%)#[pK!!3+DfpME!d""`!"E3!!!Dm"X[pJ#[pJ!!3
++B@aTB3B"#!!$rem"#3%+#[pI!!3+D@jcD!d"#3!#0!!!!E8"[IpH!3X+rei!"!T
+MCQpX$3%,!!&[!!!"Z3'mred,red!0$!!''p`C@jcFfaTEQ0XG@4PCQpXC'9bF'&
+dD!!BEh"PEP066%PZBfaeC'9'EfaNCA*3BA4S"J%+!!2rA!%-reX+re`!"!TdEb!
+J$3%-!!*Z!!!"`!(2!3d"$Jd"$3!#0!!!!FJ"crpD!3m+reS!"!TQD@aP$3%2!!&
+Y!!!"b`(1!4!-!4!!%!!+BQa[GfCTFfJZD!!#!!!0!3i!!M3!!!(!!FMr@3%4#[p
+C!!3+BfC[E!d"%3!"E`!!!F3"arpB#rpB!"3`!!KdC@e`F'&dD!!)G'9YF&"KG'J
+'reX!!!)""3!#!4)"%`d"%J!#E!!#!GB"e[pAreB"reF!!!(r9J!!!J%6!!)"&!%
+9$3%8!!*b!!!"eJ(K!4B"&`d"&J!#BJ!!!GB"h3%B!4N0!4J!!@m!!!(@!GRr93[
+r93!N-!!3Bh*jF(4[CQpXC'9bF'&dD!!3Bh*jF(4[4QpXC'9b8'&dD!d"'3!"E3!
+!!GN"h!%D$!%D!!N!!cTLEJ!#!!!0!4F!!@m!!!!!!!$r9![r9!!8-!!)G'9YF("
+KG'J!#(4PEA"3BA4S!J%9!!)"'`%F$3%E!!0*!!)"iJ)-re2r8J%G#[p6!"JZBfp
+bC@0bC@`U+LSU!!!!!!!!N!!!ER9XE!(r8J!!"J%G!!2r83%H!4m+re%!"!TVEf0
+X$3%H!!&Y!!!"jJ(Tre!+re!!"!TKE'PK"J%I!!2r6`%J!5%+rdm!"!TTER0S$3%
+J!!)d!!!"l!(drdi")JVr6J!%#Q0QEf`0!5)!!@m!!!(`!I2r63[r63!d-!!BEh"
+PER0cE'PZBfaeC'9QEfaNCA*`BA4S!"K[F'9Z8e0-5@jME(9NC8C[E'4PFP"KG'J
+'!5%!!rp-!52r5`Vr6!!%#R4[)#!0!5-!!Qi!!!(h!JB"*!%P$3%N!!)d!!!"r`)
+'rdS"*JVr5J!%#QCTE'80!5B!!@d!!!)#!J8"*``"*`!+!!4LELjS!!)!!!d"*3!
+#0!!!!IF"rrp*!5J+rdN!"!TMCQpX$3%S!!&[!!!"q`(qrdJ,rdJ!&$!!#(4PEA"
+`BA4S!!KdC@e`8'&dD!Er5`!!!J%F!!)"+3%U$3%T!!*X!!)#$3)0rdIr4J(r4`!
+!!Ip'!!!#!5S!!J%V!5`0!5X!!R)!!!)0!KJ",3%Z$3%Y!!*L!!!#$3)8!5m"-!d
+",`!"E`!!!Jd#%2p&#rp&!#3`!""MFRP`G'pQEfaNCA*`BA4S!""MFRP`G'p'Efa
+NCA*3BA4S$3%`!!&Y!!!#%!)6!6%-!6%!$3!(1Q*eCQCPFJ!#!!!0!5i!!@m!!!!
+!!!$r4![r4!!8-!!)G'9YF("KG'J!#(4PEA"3BA4S!J%X!!)"-J%c$3%b!!0*!!)
+#'3*$rd2r3J%d#[p$!"JZBfpbC@0bC@`U+LSU!!!!!!!!N!!!ER9XE!(r3J!!"J%
+d!!2r33%e!6B+rd%!"!TVEf0X$3%e!!&Y!!!#(3)Jrd!+rd!!"!TKE'PK"J%f!!2
+r2`%h!6J+rcm!"!TTER0S$3%h!!)d!!!#)`)Vrci"13Vr2J!%#Q0QEf`0!6N!!@m
+!!!)R!LVr23[r23!d-!!BEh"PER0cE'PZBfaeC'9QEfaNCA*`BA4S!"K[F'9Z8e0
+-5@jME(9NC8C[E'4PFP"KG'J'!6J!!rmm!6Vr1`Vr2!!%#R4[)#!0!6S!!Qi!!!)
+Z!Md"1`%m$3%l!!)d!!!#0J)prcS"23Vr1J!%#QCTE'80!6d!!@d!!!)j!M`"2J`
+"2J!1!!KLG@CQCA)ZD!!#!!!0!6`!!M3!!!)Z!MEr13%r#[mj!!3+BfC[E!d"2`!
+"E`!!!M)#0Imi#rmi!"3`!!KdC@e`F'&dD!!)G'9YF&"KG'J'rcX!!!)"-`!#!8!
+"33d"3!!#E!!#!N3#42mhrcB"rcF!!!(r0J!!!J&"!!)"3J&$$3&#!!*b!!!#4!*
+2!83"43d"4!!#BJ!!!N3#5`&'!8F0!8B!!@m!!!*%!NIr03[r03!N-!!3Bh*jF(4
+[CQpXC'9bF'&dD!!3Bh*jF(4[4QpXC'9b8'&dD!d"4`!"E3!!!NF#5J&)$!&)!!X
+!"6TMBA0d!!)!!!d"43!"E`!!!!!!!2md#rmd!"3`!!KdC@e`F'&dD!!)G'9YF&"
+KG'J#!8-!!J&*!8S0!8N!!dN!!J*3!RVr-rmb!8X+rc-!'#jMEh*PBh*PE#SU+LS
+!!!!!!!#3!!"ZG@aX!Imb!!!'!8X!!rma!8`"63Vr-3!%#QY[Bf`0!8`!!@d!!!*
+8!PIr-!Vr-!!%#Q&XD@%'!8d!!rm[!8i"6`Vr,`!%#QPZFfJ0!8i!!M3!!!*D!Q,
+r,J&3#[mZ!!3+BfC[E!d"8!!"E`!!!Pi#BImY#rmY!$3`!"K[F'9ZFh0XD@jME(9
+NC@C[E'4PFR"KG'J!''p`C@j68da*EQ0XG@4P4QpXC'9b8'&dD!B"6`!$rb`"8Im
+V#[mX!!3+G'mJ)!d"83!#EJ!!!Q8#G!&5!9-0!9)!!M3!!!*Y!R6r+J&8#[mU!!3
++CQPXC3d"9!!"E3!!!R!#F`&9$!&9!!`!"Q0KFh3ZD!!#!!!0!9-!!M3!!!*P!Qh
+r+3&@#[mT!!3+BfC[E!d"9J!"E`!!!QN#E2mS#rmS!"3`!!KdC@e`F'&dD!!)G'9
+YF&"KG'J'rbX!!!)"5J!#!9F"@!d"9`!#E!!#!RX#HrmRrbB"rbF!!!(r*J!!!J&
+B!!)"@3&D$3&C!!*b!!!#H`+'!9X"A!d"@`!#BJ!!!RX#JJ&G!9i0!9d!!@m!!!*
+l!Rlr*3[r*3!N-!!3Bh*jF(4[CQpXC'9bF'&dD!!3Bh*jF(4[4QpXC'9b8'&dD!d
+"AJ!"E3!!!Ri#J3&I$!&I!!X!"6TMEfe`!!)!!!d"A!!"E`!!!!!!!2mN#rmN!"3
+`!!KdC@e`F'&dD!!)G'9YF&"KG'J#!9S!!J&J!@%0!@!!!dN!!J+(!V(r)rmL!@)
++rb-!'#jMEh*PBh*PE#SU+LS!!!!!!!#3!!"ZG@aX!ImL!!!'!@)!!rmK!@-"C!V
+r)3!%#QY[Bf`0!@-!!@d!!!+,!Slr)!Vr)!!%#Q&XD@%'!@3!!rmI!@8"CJVr(`!
+%#QPZFfJ0!@8!!M3!!!+4!TRr(J&R#[mH!!3+BfC[E!d"C`!"E`!!!T8#Q2mG#rm
+G!$3`!"K[F'9ZFh0XD@jME(9NC@C[E'4PFR"KG'J!''p`C@j68da*EQ0XG@4P4Qp
+XC'9b8'&dD!B"CJ!$ra`"D2mE#[mF!!3+G'mJ)!d"D!!#EJ!!!T`#U`&T!@S0!@N
+!!M3!!!+N!U[r'J&V#[mD!!3+CQPXC3d"D`!"E3!!!UF#UJ&X$!&X!!`!"Q0[EA!
+ZD!!#!!!0!@S!!M3!!!+F!U6r'3&Y#[mC!!3+BfC[E!d"E3!"E`!!!U!#SrmB#rm
+B!"3`!!KdC@e`F'&dD!!)G'9YF&"KG'J'raX!!!)"B3!#!@i"E`d"EJ!#E!!#!V)
+#X[mAraB"raF!!!(r&J!!!J&[!!)"F!&a$3&`!!*b!!!#XJ+p!A)"F`d"FJ!#BJ!
+!!V)#Z3&d!A80!A3!!@m!!!+b!VAr&3[r&3!N-!!3Bh*jF(4[CQpXC'9bF'&dD!!
+3Bh*jF(4[4QpXC'9b8'&dD!d"G3!"E3!!!V8#Z!&f$!&f!!X!"6TMEfjQ!!)!!!d
+"F`!"E`!!!!!!!2m8#rm8!"3`!!KdC@e`F'&dD!!)G'9YF&"KG'J#!A%!!J&h!AJ
+0!AF!!dN!!J+q!ZMr%rm5!AN+ra-!'#jMEh*PBh*PE#SU+LS!!!!!!!#3!!"ZG@a
+X!Im5!!!'!AN!!rm4!AS"H`Vr%3!%#QY[Bf`0!AS!!@d!!!,#!XAr%!Vr%!!%#Q&
+XD@%'!AX!!rm2!A`"I3Vr$`!%#QPZFfJ0!A`!!M3!!!,)!Y$r$J&q#[m1!!3+BfC
+[E!d"IJ!"E`!!!X`#crm0#rm0!$3`!"K[F'9ZFh0XD@jME(9NC@C[E'4PFR"KG'J
+!''p`C@j68da*EQ0XG@4P4QpXC'9b8'&dD!B"I3!$r``"Irm,#[m-!!3+G'mJ)!d
+"I`!#EJ!!!Y-#iJ'!!B%0!B!!!M3!!!,E!Z,r#J'##[m+!!3+CQPXC3d"JJ!"E3!
+!!Yi#i3'$$!'$!!`!"Q0[EQBZD!!#!!!0!B%!!M3!!!,6!Y[r#3'%#[m*!!3+BfC
+[E!d"K!!"E`!!!YF#f[m)#rm)!"3`!!KdC@e`F'&dD!!)G'9YF&"KG'J'r`X!!!)
+"H!!#!B8"KJd"K3!#E!!#!ZN#kIm(r`B"r`F!!!(r"J!!!J''!!)"K`')$3'(!!*
+b!!!#k3,d!BN"LJd"L3!#BJ!!!ZN#m!',!B`0!BX!!@m!!!,T!Zcr"3[r"3!N-!!
+3Bh*jF(4[CQpXC'9bF'&dD!!3Bh*jF(4[4QpXC'9b8'&dD!d"M!!"E3!!!Z`#l`'
+0$!'0!!S!"$TNCA-!!J!!$3'+!!&[!!!!!!!!r`3,r`3!&$!!#(4PEA"`BA4S!!K
+dC@e`8'&dD!)"L!!#!Bi"M`d"MJ!$53!#![8$(rm$r`)"N!!+r`-!'#jMEh*PBh*
+PE#SU+LS!!!!!!!#3!!"ZG@aX!Im#!!!'!C!!!!2r!3'4!C)+r`%!"!TVEf0X$3'
+4!!&Y!!!#q3,mr`!+r`!!"!TKE'PK"J'5!!2qr`'6!C3+r[m!"!TTER0S$3'6!!)
+d!!!#r`-(r[i"P3VqrJ!%#Q0QEf`0!C8!!@m!!!-$!`Eqr3[qr3!d-!!BEh"PER0
+cE'PZBfaeC'9QEfaNCA*`BA4S!"K[F'9Z8e0-5@jME(9NC8C[E'4PFP"KG'J'!C3
+!!rlm!CEqq`Vqr!!%#R4[)#!0!CB!!Qi!!!-+!aN"P`'B$3'A!!)d!!!$%J-Cr[S
+"Q3VqqJ!%#QCTE'80!CN!!@d!!!-9!aJ"QJ`"QJ!,!!9NCA-ZD!!#!!!0!CJ!!M3
+!!!-+!a,qq3'E#[lj!!3+BfC[E!d"Q`!"E`!!!`i$%Ili#rli!"3`!!KdC@e`F'&
+dD!!)G'9YF&"KG'J'r[X!!!)"M`!#!C`"R3d"R!!#E!!#!b!$)2lhr[B"r[F!!!(
+qpJ!!!J'G!!)"RJ'I$3'H!!*b!!!$)!-V!D!"S3d"S!!#BJ!!!b!$*`'L!D-0!D)
+!!@m!!!-J!b2qp3[qp3!N-!!3Bh*jF(4[CQpXC'9bF'&dD!!3Bh*jF(4[4QpXC'9
+b8'&dD!d"S`!"E3!!!b-$*J'N$!'N!!N!!cTND!!#!!!0!D%!!@m!!!!!!!$qp![
+qp!!8-!!)G'9YF("KG'J!#(4PEA"3BA4S!J'I!!)"T3'Q$3'P!!0*!!)$,!0@r[2
+qmJ'R#[lc!"JZBfpbC@0bC@`U+LSU!!!!!!!!N!!!ER9XE!(qmJ!!"J'R!!2qm3'
+S!DN+r[%!"!TVEf0X$3'S!!&Y!!!$-!-cr[!+r[!!"!TKE'PK"J'T!!2ql`'U!DX
++rZm!"!TTER0S$3'U!!)d!!!$0J-qrZi"V!VqlJ!%#Q0QEf`0!D`!!@m!!!-k!ch
+ql3[ql3!d-!!BEh"PER0cE'PZBfaeC'9QEfaNCA*`BA4S!"K[F'9Z8e0-5@jME(9
+NC8C[E'4PFP"KG'J'!DX!!rlX!Dhqk`Vql!!%#R4[)#!0!Dd!!Qi!!!0"!e!"VJ'
+[$3'Z!!)d!!!$5303rZS"X!VqkJ!%#QCTE'80!E!!!@d!!!0-!dm"X3`"X3!+!!4
+ND#jS!!)!!!d"V`!#0!!!!d%$5IlT!E)+rZN!"!TMCQpX$3'b!!&[!!!$430)rZJ
+,rZJ!&$!!#(4PEA"`BA4S!!KdC@e`8'&dD!Eqk`!!!J'Q!!)"X`'d$3'c!!*X!!)
+$9`0ArZIqjJ(qj`!!!IlQ!!!#!E3!!J'e!EB0!E8!!R)!!!0A!f)"Y`'i$3'h!!*
+L!!!$9`0H!EN"ZJd"Z3!"E`!!!eF$@[lP#rlP!#3`!""MFRP`G'pQEfaNCA*`BA4
+S!""MFRP`G'p'EfaNCA*3BA4S$3'k!!&Y!!!$@J0G!EX-!EX!#J!%1Q4cB3!#!!!
+0!EJ!!@m!!!!!!!$qj![qj!!8-!!)G'9YF("KG'J!#(4PEA"3BA4S!J'f!!)"[!'
+p$3'm!!0*!!)$B`10rZ2qiJ'q#[lM!"JZBfpbC@0bC@`U+LSU!!!!!!!!N!!!ER9
+XE!(qiJ!!"J'q!!2qi3'r!F!+rZ%!"!TVEf0X$3'r!!&Y!!!$C`0UrZ!+rZ!!"!T
+KE'PK"J(!!!2qh`("!F)+rYm!"!TTER0S$3("!!)d!!!$E30erYi"``VqhJ!%#Q0
+QEf`0!F-!!@m!!!0a!h6qh3[qh3!d-!!BEh"PER0cE'PZBfaeC'9QEfaNCA*`BA4
+S!"K[F'9Z8e0-5@jME(9NC8C[E'4PFP"KG'J'!F)!!rlF!F6qf`Vqh!!%#R4[)#!
+0!F3!!Qi!!!0i!iF"a3('$3(&!!)d!!!$J!1(rYS"a`VqfJ!%#QCTE'80!FF!!@d
+!!!1$!iB"b!`"b!!,!!9NFf%ZD!!#!!!0!FB!!M3!!!0i!i$qf3(*#[lC!!3+BfC
+[E!d"b3!"E`!!!h`$IrlB#rlB!"3`!!KdC@e`F'&dD!!)G'9YF&"KG'J'rYX!!!)
+"[3!#!FS"b`d"bJ!#E!!#!ii$M[lArYB"rYF!!!(qeJ!!!J(,!!)"c!(0$3(-!!*
+b!!!$MJ1C!Fi"c`d"cJ!#BJ!!!ii$P3(3!G%0!G!!!@m!!!11!j(qe3[qe3!N-!!
+3Bh*jF(4[CQpXC'9bF'&dD!!3Bh*jF(4[4QpXC'9b8'&dD!d"d3!"E3!!!j%$P!(
+5$!(5!!S!"$TPFR)!!J!!$3(2!!&[!!!!!!!!rY3,rY3!&$!!#(4PEA"`BA4S!!K
+dC@e`8'&dD!)"c3!#!G-"e!d"d`!$53!#!jS$a2l6rY)"e3Vqd`!B,Q0[FQ9MFQ9
+X+LSU+J!!!!!!!*!!!'jeE'`"rY)!!!B"e3!$rY%"eJ(A#[l4!!3+DfpME!d"eJ!
+"E3!!!ji$SIl3#[l3!!3+B@aTB3B"e`!$rXm"f!(C#[l2!!3+D@jcD!d"f!!#0!!
+!!k3$V2l1!GS+rXi!"!TMCQpX$3(D!!&[!!!$U!1VrXd,rXd!0$!!''p`C@jcFfa
+TEQ0XG@4PCQpXC'9bF'&dD!!BEh"PEP066%PZBfaeC'9'EfaNCA*3BA4S"J(C!!2
+qc!(ErXX+rX`!"!TdEb!J$3(E!!*Z!!!$V`1q!G`"h3d"h!!#0!!!!lF$[[l+!Gi
++rXS!"!TQD@aP$3(H!!&Y!!!$ZJ1p!Gm-!Gm!#`!&CA*b,QJ!!J!!$3(G!!)d!!!
+$V`1hrXN"i!Vqb3!%#Q0QEf`0!H!!!@m!!!1c!lEqb![qb!!8-!!)G'9YF("KG'J
+!#(4PEA"3BA4S"[l,!!!#!G3!!J(K!H)0!H%!!Q`!!J2&!mAqarl'!Il(!!!"rXB
+!!!)"iJ!#!H-"j!d"i`!#FJ!!!m8$d!(P!HB0!H8!!Q)!!!2&!m`"j`(S$3(R!!&
+[!!!$a32)rX8,rX8!*$!!%'0bHA"dEfC[E'4PFR"KG'J!%'0bHA"dEdC[E'4PFP"
+KG'J0!HJ!!@d!!!2)!mX"k3`"k3!+!!3kCAC`!!)!!!d"jJ!"E`!!!!!!!2l%#rl
+%!"3`!!KdC@e`F'&dD!!)G'9YF&"KG'J#!H3!!J(U!HX0!HS!!dN!!J24!r[q`rl
+#!H`+rX-!'#jMEh*PBh*PE#SU+LS!!!!!!!#3!!"ZG@aX!Il#!!!'!H`!!rl"!Hd
+"lJVq`3!%#QY[Bf`0!Hd!!@d!!!29!pMq`!Vq`!!%#Q&XD@%'!Hi!!rkr!Hm"m!V
+q[`!%#QPZFfJ0!Hm!!M3!!!2E!q2q[J(a#[kq!!3+BfC[E!d"m3!"E`!!!pm$i[k
+p#rkp!$3`!"K[F'9ZFh0XD@jME(9NC@C[E'4PFR"KG'J!''p`C@j68da*EQ0XG@4
+P4QpXC'9b8'&dD!B"m!!$rV`"m[kl#[km!!3+G'mJ)!d"mJ!#EJ!!!qB$p3(c!I3
+0!I-!!M3!!!2Z!rAqZJ(e#[kk!!3+CQPXC3d"p3!"E3!!!r%$p!(f$!(f!!X!"@9
+fF#jS!!)!!!d"p!!#0!!!!qB$l[kj!IF+rVN!"!TMCQpX$3(h!!&[!!!$kJ2YrVJ
+,rVJ!&$!!#(4PEA"`BA4S!!KdC@e`8'&dD!EqZ`!!!J(V!!)"q!(j$3(i!!*X!!)
+$r!2mrVIqYJ(qY`!!!Ikf!!!#!IN!!J(k!IX0!IS!!R)!!!2m"!F"r!(p$3(m!!*
+L!!!$r!3$!Ii"r`d"rJ!"E`!!!r`$rrke#rke!#3`!""MFRP`G'pQEfaNCA*`BA4
+S!""MFRP`G'p'EfaNCA*3BA4S$3(r!!&Y!!!$r`3#!J!-!J!!#`!&1QKYB@-!!J!
+!$3(p!!&[!!!!!!!!rV3,rV3!&$!!#(4PEA"`BA4S!!KdC@e`8'&dD!)"q`!#!J%
+#!Jd#!3!$53!#"!J%-[kcrV)#!`VqX`!B,Q0[FQ9MFQ9X+LSU+J!!!!!!!*!!!'j
+eE'`"rV)!!!B#!`!$rV%#"!)&#[ka!!3+DfpME!d#"!!"E3!!"!`%$rk`#[k`!!3
++B@aTB3B#"3!$rUm#"J)(#[k[!!3+D@jcD!d#"J!#0!!!"")%'[kZ!JJ+rUi!"!T
+MCQpX$3))!!&[!!!%&J3CrUd,rUd!0$!!''p`C@jcFfaTEQ0XG@4PCQpXC'9bF'&
+dD!!BEh"PEP066%PZBfaeC'9'EfaNCA*3BA4S"J)(!!2qV!)*rUX+rU`!"!TdEb!
+J$3)*!!*Z!!!%(33X!JS##`d##J!#0!!!"#8%,2kU!J`+rUS!"!TQD@aP$3)-!!&
+Y!!!%+!3V!Jd-!Jd!$!!'D'eKBbjS!!)!!!d##`!#0!!!""d%*IkT!Ji+rUN!"!T
+MCQpX$3)1!!&[!!!%)33NrUJ,rUJ!&$!!#(4PEA"`BA4S!!KdC@e`8'&dD!EqU`!
+!!J)#!!)#$`)3$3)2!!*X!!)%-`3crUIqTJ(qT`!!!IkQ!!!#!K!!!J)4!K)0!K%
+!!R)!!!3c"$i#%`)8$3)6!!*L!!!%-`3k!K8#&Jd#&3!"E`!!"$-%0[kP#rkP!#3
+`!""MFRP`G'pQEfaNCA*`BA4S!""MFRP`G'p'EfaNCA*3BA4S$3)@!!&Y!!!%0J3
+j!KF-!KF!#`!&1QPNC@%!!J!!$3)8!!&[!!!!!!!!rU3,rU3!&$!!#(4PEA"`BA4
+S!!KdC@e`8'&dD!)#%J!#!KJ#'3d#'!!$53!#"$m%DIkMrU)#'JVqS`!B,Q0[FQ9
+MFQ9X+LSU+J!!!!!!!*!!!'jeE'`"rU)!!!B#'J!$rU%#'`)F#[kK!!3+DfpME!d
+#'`!"E3!!"%-%4[kJ#[kJ!!3+B@aTB3B#(!!$rTm#(3)H#[kI!!3+D@jcD!d#(3!
+#0!!!"%N%8IkH!Km+rTi!"!TMCQpX$3)I!!&[!!!%6343rTd,rTd!0$!!''p`C@j
+cFfaTEQ0XG@4PCQpXC'9bF'&dD!!BEh"PEP066%PZBfaeC'9'EfaNCA*3BA4S"J)
+H!!2qR!)JrTX+rT`!"!TdEb!J$3)J!!*Z!!!%9!4M!L%#)Jd#)3!#0!!!"&`%Brk
+D!L-+rTS!"!TQD@aP$3)M!!&Y!!!%A`4L!L3-!L3!$!!'D@4PB5jS!!)!!!d#)J!
+#0!!!"&3%A2kC!L8+rTN!"!TMCQpX$3)P!!&[!!!%@!4ErTJ,rTJ!&$!!#(4PEA"
+`BA4S!!KdC@e`8'&dD!EqQ`!!!J)C!!)#*J)R$3)Q!!*X!!)%DJ4UrTIqPJ(qP`!
+!!Ik@!!!#!LF!!J)S!LN0!LJ!!R)!!!4U"(8#+J)V$3)U!!*L!!!%DJ4a!L`#,3d
+#,!!"E`!!"'S%EIk9#rk9!#3`!""MFRP`G'pQEfaNCA*`BA4S!""MFRP`G'p'Efa
+NCA*3BA4S$3)Y!!&Y!!!%E34`!Li-!Li!$!!'1QaSBA0S!!)!!!d#+`!"E`!!!!!
+!!2k8#rk8!"3`!!KdC@e`F'&dD!!)G'9YF&"KG'J#!LN!!J)[!M!0!Lm!!dN!!J4
+f"+$qNrk5!M%+rT-!'#jMEh*PBh*PE#SU+LS!!!!!!!#3!!"ZG@aX!Ik5!!!'!M%
+!!rk4!M)#-`VqN3!%#QY[Bf`0!M)!!@d!!!4k"(hqN!!+rT!!!!3+B@aTB3B#-`!
+$rSm#0!)e#[k2!!3+D@jcD!d#0!!#0!!!")!%L2k1!MB+rSi!"!TMCQpX$3)f!!&
+[!!!%K!5(rSd,rSd!0$!!''p`C@jcFfaTEQ0XG@4PCQpXC'9bF'&dD!!BEh"PEP0
+66%PZBfaeC'9'EfaNCA*3BA4S"J)e!!2qM!)hrSX+rS`!"!TdEb!J$3)h!!*Z!!!
+%L`5D!MJ#13d#1!!#0!!!"*-%Q[k+!MS+rSS!"!TQD@aP$3)k!!&Y!!!%PJ5C!MX
+-!MX!$3!(E'KKFfJZD!!#!!!0!MN!!M3!!!5,"*2qL3)m#[k*!!3+BfC[E!d#2!!
+"E`!!")m%N[k)#rk)!"3`!!KdC@e`F'&dD!!)G'9YF&"KG'J'rSX!!!)#-!!#!Md
+#2Jd#23!#E!!#"+%%SIk(rSB"rSF!!!(qKJ!!!J)q!!)#2`*!$3)r!!*b!!!%S35
+X!N%#3Jd#33!#BJ!!"+%%U!*$!N30!N-!!@m!!!5K"+6qK3[qK3!N-!!3Bh*jF(4
+[CQpXC'9bF'&dD!!3Bh*jF(4[4QpXC'9b8'&dD!d#4!!"E3!!"+3%T`*&$!*&!!S
+!"$TYC$)!!J!!$3*#!!&[!!!!!!!!rS3,rS3!&$!!#(4PEA"`BA4S!!KdC@e`8'&
+dD!)#3!!#!NB#4`d#4J!$53!#"+d%erk$rS)#5!VqJ`!B,Q0[FQ9MFQ9X+LSU+J!
+!!!!!!*!!!'jeE'`"rS)!!!B#5!!$rS%#53*+#[k"!!3+DfpME!d#53!"E3!!",%
+%Y2k!#[k!!!3+B@aTB3B#5J!$rRm#5`*-#[jr!!3+D@jcD!d#5`!#0!!!",F%[rj
+q!Nd+rRi!"!TMCQpX$3*0!!&[!!!%Z`5qrRd,rRd!0$!!''p`C@jcFfaTEQ0XG@4
+PCQpXC'9bF'&dD!!BEh"PEP066%PZBfaeC'9'EfaNCA*3BA4S"J*-!!2qI!*1rRX
++rR`!"!TdEb!J$3*1!!*Z!!!%`J64!Nm#8!d#6`!#0!!!"-S%dIjk!P%+rRS!"!T
+QD@aP$3*4!!&Y!!!%c363!P)-!P)!#`!&E@3b,QJ!!J!!$3*3!!)d!!!%`J6+rRN
+#8`VqH3!%#Q0QEf`0!P-!!@m!!!6'"-RqH![qH!!8-!!)G'9YF("KG'J!#(4PEA"
+3BA4S"[jl!!!#!NF!!J*8!P80!P3!!Q`!!J6B"0MqGrjf!Ijh!!!"rRB!!!)#93!
+#!PB#9`d#9J!#FJ!!"0J%i`*B!PN0!PJ!!Q)!!!6B"0m#@J*E$3*D!!&[!!!%f!6
+ErR8,rR8!*$!!%'0bHA"dEfC[E'4PFR"KG'J!%'0bHA"dEdC[E'4PFP"KG'J0!PX
+!!@d!!!6E"0i#A!`#A!!+!!3kE@3e!!)!!!d#@3!"E`!!!!!!!2jd#rjd!"3`!!K
+dC@e`F'&dD!!)G'9YF&"KG'J#!PF!!J*G!Pi0!Pd!!dN!!J6N"3lqFrjb!Pm+rR-
+!'#jMEh*PBh*PE#SU+LS!!!!!!!#3!!"ZG@aX!Ijb!!!'!Pm!!rja!Q!#B3VqF3!
+%#QY[Bf`0!Q!!!@d!!!6S"1[qF!VqF!!%#Q&XD@%'!Q%!!rj[!Q)#B`VqE`!%#QP
+ZFfJ0!Q)!!M3!!!6Z"2EqEJ*N#[jZ!!3+BfC[E!d#C!!"E`!!"2)%pIjY#rjY!$3
+`!"K[F'9ZFh0XD@jME(9NC@C[E'4PFR"KG'J!''p`C@j68da*EQ0XG@4P4QpXC'9
+b8'&dD!B#B`!$rQ`#CIjV#[jX!!3+G'mJ)!d#C3!#EJ!!"2N&#!*Q!QF0!QB!!M3
+!!!8""3MqDJ*S#[jU!!3+CQPXC3d#D!!"E3!!"33&"`*T$!*T!!X!"@eN05jS!!)
+!!!d#C`!#0!!!"2N&!IjT!QS+rQN!"!TMCQpX$3*U!!&[!!!%r38!rQJ,rQJ!&$!
+!#(4PEA"`BA4S!!KdC@e`8'&dD!EqD`!!!J*H!!)#D`*X$3*V!!*X!!)&$`82rQI
+qCJ(qC`!!!IjQ!!!#!Q`!!J*Y!Qi0!Qd!!R)!!!82"4S#E`*`$3*[!!*L!!!&$`8
+@!R%#FJd#F3!"E`!!"3m&%[jP#rjP!#3`!""MFRP`G'pQEfaNCA*`BA4S!""MFRP
+`G'p'EfaNCA*3BA4S$3*b!!&Y!!!&%J89!R--!R-!#`!&1QeNBc)!!J!!$3*`!!&
+[!!!!!!!!rQ3,rQ3!&$!!#(4PEA"`BA4S!!KdC@e`8'&dD!)#EJ!#!R3#G3d#G!!
+$53!#"4X&4IjMrQ)#GJVqB`!B,Q0[FQ9MFQ9X+LSU+J!!!!!!!*!!!'jeE'`"rQ)
+!!!B#GJ!$rQ%#G`*i#[jK!!3+DfpME!d#G`!"E3!!"4m&)[jJ#[jJ!!3+B@aTB3B
+#H!!$rPm#H3*k#[jI!!3+D@jcD!d#H3!#0!!!"58&,IjH!RX+rPi!"!TMCQpX$3*
+l!!&[!!!&+38XrPd,rPd!0$!!''p`C@jcFfaTEQ0XG@4PCQpXC'9bF'&dD!!BEh"
+PEP066%PZBfaeC'9'EfaNCA*3BA4S"J*k!!2qA!*mrPX+rP`!"!TdEb!J$3*m!!*
+Z!!!&-!8r!Rd#IJd#I3!#0!!!"6J&2rjD!Rm+rPS!"!TQD@aP$3*r!!&Y!!!&1`8
+q!S!-!S!!$!!'E@4M-LjS!!)!!!d#IJ!#0!!!"6!&12jC!S%+rPN!"!TMCQpX$3+
+"!!&[!!!&0!8hrPJ,rPJ!&$!!#(4PEA"`BA4S!!KdC@e`8'&dD!Eq@`!!!J*e!!)
+#JJ+$$3+#!!*X!!)&4J9'rPIq9J(q9`!!!Ij@!!!#!S-!!J+%!S80!S3!!R)!!!9
+'"9%#KJ+($3+'!!*L!!!&4J90!SJ#L3d#L!!"E`!!"8B&5Ij9#rj9!#3`!""MFRP
+`G'pQEfaNCA*`BA4S!""MFRP`G'p'EfaNCA*3BA4S$3+*!!&Y!!!&539-!SS-!SS
+!$J!)1QpLDQ9MG(-!!J!!$3+(!!&[!!!!!!!!rP3,rP3!&$!!#(4PEA"`BA4S!!K
+dC@e`8'&dD!)#K3!#!SX#M!d#L`!$53!#"9)&I2j6rP)#M3Vq8`!B,Q0[FQ9MFQ9
+X+LSU+J!!!!!!!*!!!'jeE'`"rP)!!!B#M3!$rP%#MJ+2#[j4!!3+DfpME!d#MJ!
+"E3!!"9B&@Ij3#[j3!!3+B@aTB3B#M`!$rNm#N!!#N3Vq6`!%#QPZFfJ0!T!!!!)
+d!!!&A!9NrNi#NJVq6J!%#Q0QEf`0!T)!!@m!!!9J"@2q63[q63!d-!!BEh"PER0
+cE'PZBfaeC'9QEfaNCA*`BA4S!"K[F'9Z8e0-5@jME(9NC8C[E'4PFP"KG'J'!T%
+!!rj-!T2q5`Vq6!!%#R4[)#!0!T-!!Qi!!!9R"AB#P!+9$3+8!!)d!!!&E`9frNS
+#PJVq5J!%#QCTE'80!TB!!@d!!!9b"A8#P``#P`!2!!P[BQTPBh4c,QJ!!J!!$3+
+9!!)d!!!&C`9[rNN#Q!Vq53!%#Q0QEf`0!TJ!!@m!!!9V"@lq5![q5!!8-!!)G'9
+YF("KG'J!#(4PEA"3BA4S"[j,!!!#!S`!!J+C!TS0!TN!!Q`!!J9p"Ahq4rj'!Ij
+(!!!"rNB!!!)#QJ!#!TX#R!d#Q`!#FJ!!"Ad&L!+G!Ti0!Td!!Q)!!!9p"B3#R`+
+J$3+I!!&[!!!&I3@!rN8,rN8!*$!!%'0bHA"dEfC[E'4PFR"KG'J!%'0bHA"dEdC
+[E'4PFP"KG'J0!U!!!@d!!!@!"B-#S3`#S3!+!!3kF'9Y!!)!!!d#RJ!"E`!!!!!
+!!2j%#rj%!"3`!!KdC@e`F'&dD!!)G'9YF&"KG'J#!T`!!J+L!U-0!U)!!dN!!J@
+*"E2q3rj#!U3+rN-!'#jMEh*PBh*PE#SU+LS!!!!!!!#3!!"ZG@aX!Ij#!!!'!U3
+!!rj"!U8#TJVq33!%#QY[Bf`0!U8!!@d!!!@0"C!!rN!+rN!!"!TKE'PK"J+Q!!2
+q2`+R!UJ+rMm!"!TTER0S$3+R!!)d!!!&N`@ErMi#U3Vq2J!%#Q0QEf`0!UN!!@m
+!!!@A"CVq23[q23!d-!!BEh"PER0cE'PZBfaeC'9QEfaNCA*`BA4S!"K[F'9Z8e0
+-5@jME(9NC8C[E'4PFP"KG'J'!UJ!!rim!UVq1`Vq2!!%#R4[)#!0!US!!Qi!!!@
+H"Dd#U`+X$3+V!!)d!!!&TJ@YrMS#V3Vq1J!%#QCTE'80!Ud!!@d!!!@T"D`#VJ`
+#VJ!,!!9`C@dZD!!#!!!0!U`!!M3!!!@H"DEq13+[#[ij!!3+BfC[E!d#V`!"E`!
+!"D)&TIii#rii!"3`!!KdC@e`F'&dD!!)G'9YF&"KG'J'rMX!!!)#S`!#!V!#X3d
+#X!!$53!#"E3&h[ihrMB#XJVq0`!B,Q0[FQ9MFQ9X+LSU+J!!!!!!!*!!!'jeE'`
+"rMB!!!B#XJ!$rM8#X`+d#[ie!!3+DfpME!d#X`!"E3!!"EJ&Zrid#[id!!3+B@a
+TB3B#Y!!$rM-#Y3+f#[ic!!3+D@jcD!d#Y3!#0!!!"Ei&a[ib!VF+rM)!"!TMCQp
+X$3+h!!&[!!!&`JA&rM%,rM%!0$!!''p`C@jcFfaTEQ0XG@4PCQpXC'9bF'&dD!!
+BEh"PEP066%PZBfaeC'9'EfaNCA*3BA4S"J+f!!2q-!+irLm+rM!!"!TdEb!J$3+
+i!!*Z!!!&b3AB!VN#ZJd#Z3!#0!!!"G%&f2iZ!VX+rLi!"!TQD@aP$3+l!!&Y!!!
+&e!AA!V`-!V`!$!!'F'9Y-LjS!!)!!!d#ZJ!#0!!!"FN&dIiY!Vd+rLd!"!TMCQp
+X$3+p!!&[!!!&c3A3rL`,rL`!&$!!#(4PEA"`BA4S!!KdC@e`8'&dD!Eq,`!!!J+
+a!!)#[J+r$3+q!!*X!!)&h`AIrL[q+J(q+`!!!IiU!!!#!Vm!!J,!!X%0!X!!!R)
+!!!AI"HS#`J,$$3,#!!*L!!!&h`AQ!X3#a3d#a!!"E`!!"Gm&i[iT#riT!#3`!""
+MFRP`G'pQEfaNCA*`BA4S!""MFRP`G'p'EfaNCA*3BA4S$3,&!!&Y!!!&iJAP!XB
+-!XB!$3!(1R"VBh-a-J!#!!!0!X-!!@m!!!!!!!$q+![q+!!8-!!)G'9YF("KG'J
+!#(4PEA"3BA4S!J,"!!)#a`,)$3,(!!0*!!)&k`B9rLIq*J,*#[iR!"JZBfpbC@0
+bC@`U+LSU!!!!!!!!N!!!ER9XE!(q*J!!"J,*!!2q*3,+!XX+rL8!"!TVEf0X$3,
++!!&Y!!!&l`AbrL3+rL3!"!TKE'PK"J,,!!2q)`,-!Xd+rL-!"!TTER0S$3,-!!)
+d!!!&p3AprL)#cJVq)J!%#Q0QEf`0!Xi!!@m!!!Aj"Icq)3[q)3!d-!!BEh"PER0
+cE'PZBfaeC'9QEfaNCA*`BA4S!"K[F'9Z8e0-5@jME(9NC8C[E'4PFP"KG'J'!Xd
+!!riJ!Xrq(`Vq)!!%#R4[)#!0!Xm!!Qi!!!B!"Jm#d!,4$3,3!!)d!!!'#!B2rKi
+#dJVq(J!%#QCTE'80!Y)!!@d!!!B,"Ji#d``#d`!1!!K`Df0c-6)ZD!!#!!!0!Y%
+!!M3!!!B!"JMq(3,8#[iG!!3+BfC[E!d#e!!"E`!!"J3'"riF#riF!"3`!!KdC@e
+`F'&dD!!)G'9YF&"KG'J'rKm!!!)#b!!#!Y8#eJd#e3!#E!!#"KB'&[iErKS"rKX
+!!!(q'J!!!J,@!!)#e`,B$3,A!!*b!!!'&JBK!YN#fJd#f3!#BJ!!"KB'(3,E!Y`
+0!YX!!@m!!!B@"KRq'3[q'3!N-!!3Bh*jF(4[CQpXC'9bF'&dD!!3Bh*jF(4[4Qp
+XC'9b8'&dD!d#h!!"E3!!"KN'(!,G$!,G!!`!"MT`Df0c0`!#!!!0!YS!!@m!!!!
+!!!$q'![q'!!8-!!)G'9YF("KG'J!#(4PEA"3BA4S!J,B!!)#hJ,I$3,H!!0*!!)
+')JC-rKIq&J,J#[iA!"JZBfpbC@0bC@`U+LSU!!!!!!!!N!!!ER9XE!(q&J!!"J,
+J!!2q&3,K!Z)+rK8!"!TVEf0X$3,K!!&Y!!!'*JBTrK3+rK3!"!TKE'PK"J,L!!2
+q%`,M!Z3+rK-!"!TTER0S$3,M!!)d!!!',!BdrK)#j3Vq%J!%#Q0QEf`0!Z8!!@m
+!!!B`"M2q%3[q%3!d-!!BEh"PER0cE'PZBfaeC'9QEfaNCA*`BA4S!"K[F'9Z8e0
+-5@jME(9NC8C[E'4PFP"KG'J'!Z3!!ri3!ZEq$`Vq%!!%#R4[)#!0!ZB!!Qi!!!B
+h"NB#j`,S$3,R!!)d!!!'2`C'rJi#k3Vq$J!%#QCTE'80!ZN!!@d!!!C#"N8#kJ`
+#kJ!0!!G`Df0c0bjS!!)!!!d#k!!#0!!!"MF'2ri0!ZX+rJd!"!TMCQpX$3,V!!&
+[!!!'1`BqrJ`,rJ`!&$!!#(4PEA"`BA4S!!KdC@e`8'&dD!Eq$`!!!J,I!!)#l!,
+Y$3,X!!*X!!)'63C0rJ[q#J(q#`!!!Ii+!!!#!Zd!!J,Z!Zm0!Zi!!R)!!!C0"PJ
+#m!,a$3,`!!*L!!!'63C8![)#m`d#mJ!"E`!!"Nd'82i*#ri*!#3`!""MFRP`G'p
+QEfaNCA*`BA4S!""MFRP`G'p'EfaNCA*3BA4S$3,c!!&Y!!!'8!C6![3-![3!#`!
+&1R*KEQ3!!J!!$3,a!!&[!!!!!!!!rJJ,rJJ!&$!!#(4PEA"`BA4S!!KdC@e`8'&
+dD!)#l`!#![8#pJd#p3!$53!#"PN'Jri(rJB#p`Vq"`!B,Q0[FQ9MFQ9X+LSU+J!
+!!!!!!*!!!'jeE'`"rJB!!!B#p`!$rJ8#q!,j#[i&!!3+DfpME!d#q!!"E3!!"Pd
+'B2i%#[i%!!3+B@aTB3B#q3!$rJ-#qJ,l#[i$!!3+D@jcD!d#qJ!#0!!!"Q-'Dri
+#![`+rJ)!"!TMCQpX$3,m!!&[!!!'C`CUrJ%,rJ%!0$!!''p`C@jcFfaTEQ0XG@4
+PCQpXC'9bF'&dD!!BEh"PEP066%PZBfaeC'9'EfaNCA*3BA4S"J,l!!2q!!,prIm
++rJ!!"!TdEb!J$3,p!!*Z!!!'EJCp![i#r`d#rJ!#0!!!"RB'IIhq!`!+rIi!"!T
+QD@aP$3-!!!&Y!!!'H3Cm!`%-!`%!$!!'FQ&ZC#jS!!)!!!d#r`!#0!!!"Qi'G[h
+p!`)+rId!"!TMCQpX$3-#!!&[!!!'FJCerI`,rI`!&$!!#(4PEA"`BA4S!!KdC@e
+`8'&dD!Epr`!!!J,f!!)$!`-%$3-$!!*X!!)'K!D%rI[pqJ(pq`!!!Ihk!!!#!`3
+!!J-&!`B0!`8!!R)!!!D%"Sm$"`-)$3-(!!*L!!!'K!D,!`N$#Jd$#3!"E`!!"S3
+'Krhj#rhj!#3`!""MFRP`G'pQEfaNCA*`BA4S!""MFRP`G'p'EfaNCA*3BA4S$3-
++!!&Y!!!'K`D+!`X-!`X!#J!%1R*M-J!#!!!0!`J!!@m!!!!!!!$pq![pq!!8-!!
+)G'9YF("KG'J!#(4PEA"3BA4S!J-'!!)$$!-0$3--!!0*!!)'N!!'Z[hhrIB$$JV
+pp`!B,Q0[FQ9MFQ9X+LSU+J!!!!!!!*!!!'jeE'`"rIB!!!B$$J!$rI8$$`-3#[h
+e!!3+DfpME!d$$`!"E3!!"T3'Prhd#[hd!!3+B@aTB3B$%!!$rI-$%3-5#[hc!!3
++D@jcD!d$%3!#0!!!"TS'S[hb!a-+rI)!"!TMCQpX$3-6!!&[!!!'RJDKrI%,rI%
+!0$!!''p`C@jcFfaTEQ0XG@4PCQpXC'9bF'&dD!!BEh"PEP066%PZBfaeC'9'Efa
+NCA*3BA4S"J-5!!2pm!-8rHm+rI!!"!TdEb!J$3-8!!*Z!!!'T3Dd!a8$&Jd$&3!
+#0!!!"Ud'Y2hZ!aF+rHi!"!TQD@aP$3-A!!&Y!!!'X!Dc!aJ-!aJ!#`!&FQ-b,QJ
+!!J!!$3-@!!)d!!!'T3DYrHd$'3Vpl3!%#Q0QEf`0!aN!!@m!!!DT"Ucpl![pl!!
+8-!!)G'9YF("KG'J!#(4PEA"3BA4S"[h[!!!#!`d!!J-D!aX0!aS!!Q`!!JDl"V[
+pkrhU!IhV!!!"rHS!!!)$'`!#!a`$(3d$(!!#FJ!!"VX'aJ-H!am0!ai!!Q)!!!D
+l"X)$)!-K$3-J!!&[!!!'Z`DqrHN,rHN!*$!!%'0bHA"dEfC[E'4PFR"KG'J!%'0
+bHA"dEdC[E'4PFP"KG'J0!b%!!@d!!!Dq"X%$)J`$)J!+!!3kFQ-d!!)!!!d$(`!
+"E`!!!!!!!2hS#rhS!"3`!!KdC@e`F'&dD!!)G'9YF&"KG'J#!ad!!J-M!b30!b-
+!!dN!!JE("[(pjrhQ!b8+rHF!'#jMEh*PBh*PE#SU+LS!!!!!!!#3!!"ZG@aX!Ih
+Q!!!'!b8!!rhP!bB$*`Vpj3!%#QY[Bf`0!bB!!@d!!!E,"Xlpj!Vpj!!%#Q&XD@%
+'!bF!!rhM!bJ$+3Vpi`!%#QPZFfJ0!bJ!!M3!!!E4"YRpiJ-U#[hL!!3+BfC[E!d
+$+J!"E`!!"Y8'f2hK#rhK!$3`!"K[F'9ZFh0XD@jME(9NC@C[E'4PFR"KG'J!''p
+`C@j68da*EQ0XG@4P4QpXC'9b8'&dD!B$+3!$rH!$+rhI#[hJ!!3+G'mJ)!d$+`!
+#EJ!!"Y`'k`-X!bd0!b`!!M3!!!EN"Z[phJ-Z#[hH!!3+CQPXC3d$,J!"E3!!"ZF
+'kJ-[$!-[!!X!"A*M0#jS!!)!!!d$,3!#0!!!"Y`'j2hG!c!+rGd!"!TMCQpX$3-
+`!!&[!!!'i!EMrG`,rG`!&$!!#(4PEA"`BA4S!!KdC@e`8'&dD!Eph`!!!J-N!!)
+$-3-b$3-a!!*X!!)'mJEbrG[pfJ(pf`!!!IhD!!!#!c)!!J-c!c30!c-!!R)!!!E
+b"[d$03-f$3-e!!*L!!!'mJEj!cF$1!d$0`!"E`!!"[)'pIhC#rhC!#3`!""MFRP
+`G'pQEfaNCA*`BA4S!""MFRP`G'p'EfaNCA*3BA4S$3-i!!&Y!!!'p3Ei!cN-!cN
+!#J!%1R*M03!#!!!0!cB!!@m!!!!!!!$pf![pf!!8-!!)G'9YF("KG'J!#(4PEA"
+3BA4S!J-d!!)$1J-l$3-k!!0*!!)'rJFSrGIpeJ-m#[hA!"JZBfpbC@0bC@`U+LS
+U!!!!!!!!N!!!ER9XE!(peJ!!"J-m!!2pe3-p!ci+rG8!"!TVEf0X$3-p!!&Y!!!
+(!JF&rG3+rG3!"!TKE'PK"J-q!!2pd`-r!d!+rG-!"!TTER0S$3-r!!)d!!!(#!F
+3rG)$33VpdJ!%#Q0QEf`0!d%!!@m!!!F-"`rpd3[pd3!d-!!BEh"PER0cE'PZBfa
+eC'9QEfaNCA*`BA4S!"K[F'9Z8e0-5@jME(9NC8C[E'4PFP"KG'J'!d!!!rh3!d,
+pc`Vpd!!%#R4[)#!0!d)!!Qi!!!F6"b)$3`0%$30$!!)d!!!('`FLrFi$43VpcJ!
+%#QCTE'80!d8!!@d!!!FH"b%$4J`$4J!,!!9bBc8ZD!!#!!!0!d3!!M3!!!F6"a[
+pc30(#[h0!!3+BfC[E!d$4`!"E`!!"aF('[h-#rh-!"3`!!KdC@e`F'&dD!!)G'9
+YF&"KG'J'rFm!!!)$1`!#!dJ$53d$5!!#E!!#"bN(+Ih,rFS"rFX!!!(pbJ!!!J0
+*!!)$5J0,$30+!!*b!!!(+3Fd!d`$63d$6!!#BJ!!"bN(-!01!dm0!di!!@m!!!F
+T"bcpb3[pb3!N-!!3Bh*jF(4[CQpXC'9bF'&dD!!3Bh*jF(4[4QpXC'9b8'&dD!d
+$6`!"E3!!"b`(,`03$!03!!d!"cTbDA"PE@3!!J!!$300!!&[!!!!!!!!rFJ,rFJ
+!&$!!#(4PEA"`BA4S!!KdC@e`8'&dD!)$5`!#!e%$8Jd$83!$53!#"c8(Arh(rFB
+$8`Vpa`!B,Q0[FQ9MFQ9X+LSU+J!!!!!!!*!!!'jeE'`"rFB!!!B$8`!$rF8$9!0
+9#[h&!!3+DfpME!d$9!!"E3!!"cN(22h%#[h%!!3+B@aTB3B$93!$rF-$9J0A#[h
+$!!3+D@jcD!d$9J!#0!!!"cm(4rh#!eJ+rF)!"!TMCQpX$30B!!&[!!!(3`G'rF%
+,rF%!0$!!''p`C@jcFfaTEQ0XG@4PCQpXC'9bF'&dD!!BEh"PEP066%PZBfaeC'9
+'EfaNCA*3BA4S"J0A!!2p`!0CrEm+rF!!"!TdEb!J$30C!!*Z!!!(5JGC!eS$@`d
+$@J!#0!!!"e)(@Ifq!e`+rEi!"!TQD@aP$30F!!&Y!!!(93GB!ed-!ed!$J!)FQP
+`C@eN,QJ!!J!!$30E!!)d!!!(5JG5rEd$AJVp[3!%#Q0QEf`0!ei!!@m!!!G1"e(
+p[![p[!!8-!!)G'9YF("KG'J!#(4PEA"3BA4S"[fr!!!#!e)!!J0I!f!0!em!!Q`
+!!JGJ"f$pZrfk!Ifl!!!"rES!!!)$B!!#!f%$BJd$B3!#FJ!!"f!(D`0M!f30!f-
+!!Q)!!!GJ"fF$C30Q$30P!!&[!!!(B!GMrEN,rEN!*$!!%'0bHA"dEfC[E'4PFR"
+KG'J!%'0bHA"dEdC[E'4PFP"KG'J0!fB!!@d!!!GM"fB$C``$C`!+!!3kFR0K!!)
+!!!d$C!!"E`!!!!!!!2fi#rfi!"3`!!KdC@e`F'&dD!!)G'9YF&"KG'J#!f)!!J0
+S!fN0!fJ!!dN!!JGX"jEpYrff!fS+rEF!'#jMEh*PBh*PE#SU+LS!!!!!!!#3!!"
+ZG@aX!Iff!!!'!fS!!rfe!fX$E!VpY3!%#QY[Bf`0!fX!!@d!!!G`"h2pY!VpY!!
+%#Q&XD@%'!f`!!rfc!fd$EJVpX`!%#QPZFfJ0!fd!!M3!!!Gf"hlpXJ0[#[fb!!3
++BfC[E!d$E`!"E`!!"hS(IIfa#rfa!$3`!"K[F'9ZFh0XD@jME(9NC@C[E'4PFR"
+KG'J!''p`C@j68da*EQ0XG@4P4QpXC'9b8'&dD!B$EJ!$rE!$F2f[#[f`!!3+G'm
+J)!d$F!!#EJ!!"i%(N!!$F30b$30a!!)d!!!(L3H3!2fZ!h-+rDi!"!TQD@aP$30
+c!!&Y!!!(M!H2!h3-!h3!#`!&FR0K,QJ!!J!!$30b!!)d!!!(J3H*rDd$G3VpV3!
+%#Q0QEf`0!h8!!@m!!!H&"iMpV![pV!!8-!!)G'9YF("KG'J!#(4PEA"3BA4S"[f
+[!!!#!fN!!J0f!hF0!hB!!Q`!!JHA"jIpUrfU!IfV!!!"rDS!!!)$G`!#!hJ$H3d
+$H!!#FJ!!"jF(SJ0k!hX0!hS!!Q)!!!HA"ji$I!0p$30m!!&[!!!(P`HDrDN,rDN
+!*$!!%'0bHA"dEfC[E'4PFR"KG'J!%'0bHA"dEdC[E'4PFP"KG'J0!hd!!@d!!!H
+D"jd$IJ`$IJ!-!!BkFh4KBfX!!J!!$30l!!&[!!!!!!!!rDJ,rDJ!&$!!#(4PEA"
+`BA4S!!KdC@e`8'&dD!)$H3!#!hm$J!d$I`!$53!#"k-(cIfRrDB$J3VpT`!B,Q0
+[FQ9MFQ9X+LSU+J!!!!!!!*!!!'jeE'`"rDB!!!B$J3!$rD8$JJ1$#[fP!!3+Dfp
+ME!d$JJ!"E3!!"kF(U[fN#[fN!!3+B@aTB3B$J`!$rD-$K!1&#[fM!!3+D@jcD!d
+$K!!#0!!!"kd(YIfL!iB+rD)!"!TMCQpX$31'!!&[!!!(X3HdrD%,rD%!0$!!''p
+`C@jcFfaTEQ0XG@4PCQpXC'9bF'&dD!!BEh"PEP066%PZBfaeC'9'EfaNCA*3BA4
+S"J1&!!2pS!1(rCm+rD!!"!TdEb!J$31(!!*Z!!!(Z!I(!iJ$L3d$L!!#0!!!"m!
+(arfH!iS+rCi!"!TQD@aP$31+!!&Y!!!(``I'!iX-!iX!$3!(Fh4KBfXZD!!#!!!
+0!iN!!M3!!!Hi"m$pR31-#[fG!!3+BfC[E!d$M!!"E`!!"l`([rfF#rfF!"3`!!K
+dC@e`F'&dD!!)G'9YF&"KG'J'rCm!!!)$J!!#!id$MJd$M3!$53!#"mi(q2fErCS
+$M`VpQ`!B,Q0[FQ9MFQ9X+LSU+J!!!!!!!*!!!'jeE'`"rCS!!!B$M`!$rCN$N!!
+$N3VpQ3!%#QY[Bf`0!j!!!!&Y!!!(dJI9rCJ+rCJ!"!TKE'PK"J14!!2pP`15!j-
++rCF!"!TTER0S$315!!)d!!!(f!IJrCB$P!VpPJ!%#Q0QEf`0!j3!!@m!!!IF"pr
+pP3[pP3!d-!!BEh"PER0cE'PZBfaeC'9QEfaNCA*`BA4S!"K[F'9Z8e0-5@jME(9
+NC8C[E'4PFP"KG'J'!j-!!rf8!jApN`VpP!!%#R4[)#!0!j8!!Qi!!!IM"r)$PJ1
+A$31@!!)d!!!(k`IbrC)$Q!VpNJ!%#QCTE'80!jJ!!@d!!!IZ"r%$Q3`$Q3!4!!Y
+cB@CPFh4KBfXZD!!#!!!0!jF!!M3!!!IM"q[pN31D#[f4!!3+BfC[E!d$QJ!"E`!
+!"qF(k[f3!![pN!!!&$!!#(4PEA"`BA4S!!KdC@e`8'&dD!EpN`!!!J11!!)$Q`1
+F$31E!!*X!!)(q3IjrBrpMJ(pM`!!!If1!!!#!j`!!J1G!ji0!jd!!R)!!!Ij#!3
+$R`1J$31I!!*L!!!(q3J!!k%$SJd$S3!"E`!!"rN(r2f0#rf0!#3`!""MFRP`G'p
+QEfaNCA*`BA4S!""MFRP`G'p'EfaNCA*3BA4S$31L!!&Y!!!(r!Ir!k--!k-!#J!
+%1R0SB3!#!!!0!k!!!@m!!!!!!!$pM![pM!!8-!!)G'9YF("KG'J!#(4PEA"3BA4
+S!J1H!!)$T!1P$31N!!0*!!))"3J[rB[pLJ1Q#[f,!"JZBfpbC@0bC@`U+LSU!!!
+!!!!!N!!!ER9XE!(pLJ!!"J1Q!!2pL31R!kJ+rBN!"!TVEf0X$31R!!&Y!!!)#3J
+-rBJ+rBJ!"!TKE'PK"J1S!!2pK`1T!kS+rBF!"!TTER0S$31T!!)d!!!)$`JArBB
+$U`VpKJ!%#Q0QEf`0!kX!!@m!!!J6#"EpK3[pK3!d-!!BEh"PER0cE'PZBfaeC'9
+QEfaNCA*`BA4S!"K[F'9Z8e0-5@jME(9NC8C[E'4PFP"KG'J'!kS!!rf%!kcpJ`V
+pK!!%#R4[)#!0!k`!!Qi!!!JD##N$V31Z$31Y!!)d!!!))JJTrB)$V`VpJJ!%#QC
+TE'80!km!!@d!!!JP##J$X!`$X!!,!!9cD'%ZD!!#!!!0!ki!!M3!!!JD##,pJ31
+a#[f"!!3+BfC[E!d$X3!"E`!!#"i))If!#rf!!"3`!!KdC@e`F'&dD!!)G'9YF&"
+KG'J'rB-!!!)$T3!#!l)$X`d$XJ!#E!!##$!)-2errAi"rAm!!!(pIJ!!!J1c!!)
+$Y!1e$31d!!*b!!!)-!Jl!lB$Y`d$YJ!#BJ!!#$!)0`1i!lN0!lJ!!@m!!!J`#$2
+pI3[pI3!N-!!3Bh*jF(4[CQpXC'9bF'&dD!!3Bh*jF(4[4QpXC'9b8'&dD!d$Z3!
+"E3!!#$-)0J1k$!1k!!d!"cTdH(4IC')!!J!!$31h!!&[!!!!!!!!rA`,rA`!&$!
+!#(4PEA"`BA4S!!KdC@e`8'&dD!)$Y3!#!lX$[!d$Z`!$53!##$`)C[elrAS$[3V
+pH`!B,Q0[FQ9MFQ9X+LSU+J!!!!!!!*!!!'jeE'`"rAS!!!B$[3!$rAN$[J1r#[e
+j!!3+DfpME!d$[J!"E3!!#%!)3rei#[ei!!3+B@aTB3B$[`!$rAF$`!2"#[eh!!3
++D@jcD!d$`!!#0!!!#%B)6[ef!m)+rAB!"!TMCQpX$32#!!&[!!!)5JK0rA8,rA8
+!0$!!''p`C@jcFfaTEQ0XG@4PCQpXC'9bF'&dD!!BEh"PEP066%PZBfaeC'9'Efa
+NCA*3BA4S"J2"!!2pG!2$rA-+rA3!"!TdEb!J$32$!!*Z!!!)83KJ!m3$a3d$a!!
+#0!!!#&N)B2eb!mB+rA)!"!TQD@aP$32'!!&Y!!!)A!KI!mF-!mF!$J!)G(KdAf4
+L,QJ!!J!!$32&!!)d!!!)83KCrA%$b!VpF3!%#Q0QEf`0!mJ!!@m!!!K9#&MpF![
+pF!!8-!!)G'9YF("KG'J!#(4PEA"3BA4S"[ec!!!#!l`!!J2*!mS0!mN!!Q`!!JK
+R#'IpEreZ!Ie[!!!"r@i!!!)$bJ!#!mX$c!d$b`!#FJ!!#'F)FJ20!mi0!md!!Q)
+!!!KR#'i$c`23$322!!&[!!!)C`KUr@d,r@d!*$!!%'0bHA"dEfC[E'4PFR"KG'J
+!%'0bHA"dEdC[E'4PFP"KG'J0!p!!!@d!!!KU#'d$d3`$d3!,!!8kH$8`13!#!!!
+0!mi!!@m!!!!!!!$pE![pE!!8-!!)G'9YF("KG'J!#(4PEA"3BA4S!J2-!!)$dJ2
+6$325!!0*!!))F`LGr@[pDJ28#[eV!"JZBfpbC@0bC@`U+LSU!!!!!!!!N!!!ER9
+XE!(pDJ!!"J28!!2pD329!pB+r@N!"!TVEf0X$329!!&Y!!!)G`Kkr@J+r@J!"!T
+KE'PK"J2@!!2pC`2A!pJ+r@F!"!TTER0S$32A!!)d!!!)I3L&r@B$f3VpCJ!%#Q0
+QEf`0!pN!!@m!!!L"#)6pC3[pC3!d-!!BEh"PER0cE'PZBfaeC'9QEfaNCA*`BA4
+S!"K[F'9Z8e0-5@jME(9NC8C[E'4PFP"KG'J'!pJ!!reN!pVpB`VpC!!%#R4[)#!
+0!pS!!Qi!!!L)#*F$f`2F$32E!!)d!!!)N!!)PreL!pd+r@)!"!TQD@aP$32G!!&
+Y!!!)N`L@!pi-!pi!$!!'H$8`15jS!!)!!!d$h!!#0!!!#)J)N!$pB32I#[eK!!3
++BfC[E!d$h`!"E`!!#)`)MreJ#reJ!"3`!!KdC@e`F'&dD!!)G'9YF&"KG'J'r@-
+!!!)$d`!#!q!$i3d$i!!$53!##*i)b2eIr9i$iJVpA`!B,Q0[FQ9MFQ9X+LSU+J!
+!!!!!!*!!!'jeE'`"r9i!!!B$iJ!$r9d$i`2N#[eG!!3+DfpME!d$i`!"E3!!#+)
+)TIeF#[eF!!3+B@aTB3B$j!!$r9X$j32Q#[eE!!3+D@jcD!d$j3!#0!!!#+J)X2e
+D!qF+r9S!"!TMCQpX$32R!!&[!!!)V!L[r9N,r9N!0$!!''p`C@jcFfaTEQ0XG@4
+PCQpXC'9bF'&dD!!BEh"PEP066%PZBfaeC'9'EfaNCA*3BA4S"J2Q!!2p@!2Sr9F
++r9J!"!TdEb!J$32S!!*Z!!!)X`M#!qN$kJd$k3!#0!!!#,X)`[e@!qX+r9B!"!T
+QD@aP$32V!!&Y!!!)[JM"!q`-!q`!%!!+H$8`19pfCRNZD!!#!!!0!qS!!M3!!!L
+c#,[p932Y#[e9!!3+BfC[E!d$l3!"E`!!#,F)Z[e8#re8!"3`!!KdC@e`F'&dD!!
+)G'9YF&"KG'J'r9F!!!)$i3!#!qi$l`d$lJ!#E!!##-N)bIe6r9)"r9-!!!(p8J!
+!!J2[!!)$m!2a$32`!!*b!!!)b3M8!r)$m`d$mJ!#BJ!!#-N)d!2d!r80!r3!!@m
+!!!M*#-cp83[p83!N-!!3Bh*jF(4[CQpXC'9bF'&dD!!3Bh*jF(4[4QpXC'9b8'&
+dD!d$p3!"E3!!#-`)c`2f$!2f!!d!"cTi06!jGM-!!J!!$32c!!&[!!!!!!!!r9!
+,r9!!&$!!#(4PEA"`BA4S!!KdC@e`8'&dD!)$m3!#!rF$q!d$p`!$53!##08)rre
+2r8i$q3Vp6`!B,Q0[FQ9MFQ9X+LSU+J!!!!!!!*!!!'jeE'`"r8i!!!B$q3!$r8d
+$qJ2l#[e0!!3+DfpME!d$qJ!"E3!!#0N)h2e-#[e-!!3+B@aTB3B$q`!$r8X$r!2
+p#[e,!!3+D@jcD!d$r!!#0!!!#0m)jre+!ri+r8S!"!TMCQpX$32q!!&[!!!)i`M
+Qr8N,r8N!0$!!''p`C@jcFfaTEQ0XG@4PCQpXC'9bF'&dD!!BEh"PEP066%PZBfa
+eC'9'EfaNCA*3BA4S"J2p!!2p5!2rr8F+r8J!"!TdEb!J$32r!!*Z!!!)kJMj"!!
+%!3d%!!!#0!!!#2))qIe'"!)+r8B!"!TQD@aP$33#!!&Y!!!)p3Mi"!--"!-!$J!
+)H$8`1ABc,QJ!!J!!$33"!!)d!!!)kJMbr88%"!Vp43!%#Q0QEf`0"!3!!@m!!!M
+Z#2(p4![p4!!8-!!)G'9YF("KG'J!#(4PEA"3BA4S"[e(!!!#!rJ!!J3&"!B0"!8
+!!Q`!!JN!#3$p3re#!Ie$!!!"r8)!!!)%"J!#"!F%#!d%"`!$53!##3!*+[e"r8!
+%#3Vp33!B,Q0[FQ9MFQ9X+LSU+J!!!!!!!*!!!'jeE'`"r8!!!!B%#3!$r6m%#J3
+,#[dr!!3+DfpME!d%#J!"E3!!#33*"rdq#[dq!!3+B@aTB3B%#`!$r6d%$!30#[d
+p!!3+D@jcD!d%$!!#0!!!#3S*%[dm"!i+r6`!"!TMCQpX$331!!&[!!!*$JN4r6X
+,r6X!0$!!''p`C@jcFfaTEQ0XG@4PCQpXC'9bF'&dD!!BEh"PEP066%PZBfaeC'9
+'EfaNCA*3BA4S"J30!!2p1J32r6N+r6S!"!TdEb!J$332!!*Z!!!*&3NN""!%%3d
+%%!!#0!!!#4d**2di"")+r6J!"!TQD@aP$335!!&Y!!!*)!NM""--""-!#`!&Fh0
+X,QJ!!J!!$334!!)d!!!*&3NGr6F%&!Vp0`!%#Q0QEf`0""3!!@m!!!NC#4cp0J[
+p0J!H-!!0Fh0XCQpXC'9bF'&dD!!0Fh0X4QpXC'9b8'&dD!Ep13!!!J3)!!)%&33
+@$339!!0*!!)*+`P9r6Ap0!3A#[de!"JZBfpbC@0bC@`U+LSU!!!!!!!!N!!!ER9
+XE!(p0!!!"J3A!!2p-`3B""N+r6-!"!TVEf0X$33B!!&Y!!!*,`Nbr6)+r6)!"!T
+KE'PK"J3C!!2p-33D""X+r6%!"!TTER0S$33D!!)d!!!*03Npr6!%(!Vp-!!%#Q0
+QEf`0""`!!@m!!!Nj#6cp,`[p,`!d-!!BEh"PER0cE'PZBfaeC'9QEfaNCA*`BA4
+S!"K[F'9Z8e0-5@jME(9NC8C[E'4PFP"KG'J'""X!!rdZ""hp,3Vp,J!%#R4[)#!
+0""d!!Qi!!!P!#8m%(J3I$33H!!)d!!!*5!P2r5`%)!Vp,!!%#QCTE'80"#!!!@d
+!!!P,#8i%)3`%)3!-!!CcFf`b,QJ!!J!!$33I!!)d!!!*3!P)r5X%)JVp+`!%#Q0
+QEf`0"#)!!@m!!!P%#8Ip+J[p+J!H-!!0Fh0XCQpXC'9bF'&dD!!0Fh0X4QpXC'9
+b8'&dD!Ep,3!!!J3@!!)%)`3N$33M!!0*!!)*9JQ!r5Rp+!3P#[dT!"JZBfpbC@0
+bC@`U+LSU!!!!!!!!N!!!ER9XE!(p+!!!"J3P!!2p*`3Q"#F+r5F!"!TVEf0X$33
+Q!!&Y!!!*@JPGr5B+r5B!"!TKE'PK"J3R!!2p*33S"#N+r58!"!TTER0S$33S!!)
+d!!!*B!PSr53%+JVp*!!%#Q0QEf`0"#S!!@m!!!PN#@Ip)`[p)`!d-!!BEh"PER0
+cE'PZBfaeC'9QEfaNCA*`BA4S!"K[F'9Z8e0-5@jME(9NC8C[E'4PFP"KG'J'"#N
+!!rdL"#[p)3Vp)J!%#R4[)#!0"#X!!Qi!!!PV#AS%,!3Y$33X!!)d!!!*F`Pkr5!
+%,JVp)!!%#QCTE'80"#i!!@d!!!Pf#AN%,``%,`!0!!GcFf`b-bjS!!)!!!d%,3!
+#0!!!#@X*FrdI"$!+r4m!"!TMCQpX$33`!!&[!!!*E`Pbr4i,r4i!(M!!$A0cE'C
+[E'4PFR"KG'J!$A0cE%C[E'4PFP"KG'J'r5%!!!)%*!!#"$%%-Jd%-3!$53!##B%
+*UrdGr4`%-`Vp(3!B,Q0[FQ9MFQ9X+LSU+J!!!!!!!*!!!'jeE'`"r4`!!!B%-`!
+$r4X%0!3e#[dE!!3+DfpME!d%0!!"E3!!#B8*L2dD#[dD!!3+B@aTB3B%03!$r4N
+%0J3h#[dC!!3+D@jcD!d%0J!#0!!!#BX*NrdB"$J+r4J!"!TMCQpX$33i!!&[!!!
+*M`Q5r4F,r4F!0$!!''p`C@jcFfaTEQ0XG@4PCQpXC'9bF'&dD!!BEh"PEP066%P
+ZBfaeC'9'EfaNCA*3BA4S"J3h!!2p&J3jr48+r4B!"!TdEb!J$33j!!*Z!!!*PJQ
+P"$S%1`d%1J!#0!!!#Ci*TId8"$`+r43!"!TQD@aP$33m!!&Y!!!*S3QN"$d-"$d
+!$!!'Fh0X-bjS!!)!!!d%1`!#0!!!#CB*R[d6"$i+r4-!"!TMCQpX$33q!!&[!!!
+*QJQGr4),r4)!(M!!$A0cE'C[E'4PFR"KG'J!$A0cE%C[E'4PFP"KG'J'r48!!!)
+%-J!#"$m%3!d%2`!$53!##D`*e[d4r4!%33Vp%3!B,Q0[FQ9MFQ9X+LSU+J!!!!!
+!!*!!!'jeE'`"r4!!!!B%33!$r3m%3J4$#[d2!!3+DfpME!d%3J!"E3!!#E!*Xrd
+1#[d1!!3+B@aTB3B%3`!$r3d%4!4&#[d0!!3+D@jcD!d%4!!#0!!!#EB*[[d-"%B
++r3`!"!TMCQpX$34'!!&[!!!*ZJQpr3X,r3X!0$!!''p`C@jcFfaTEQ0XG@4PCQp
+XC'9bF'&dD!!BEh"PEP066%PZBfaeC'9'EfaNCA*3BA4S"J4&!!2p#J4(r3N+r3S
+!"!TdEb!J$34(!!*Z!!!*`3R3"%J%53d%5!!#0!!!#FN*d2d)"%S+r3J!"!TQD@a
+P$34+!!&Y!!!*c!R2"%X-"%X!$!!'G'ac-5jS!!)!!!d%53!#0!!!#F%*bId("%`
++r3F!"!TMCQpX$34-!!&[!!!*a3R)r3B,r3B!(M!!$A0cE'C[E'4PFR"KG'J!$A0
+cE%C[E'4PFP"KG'J'r3N!!!)%3!!#"%d%6Jd%63!#E!!##GF*erd&r33"r38!!!(
+p"!!!!J41!!)%6`43$342!!0*!!)*e`S"r32p!J44#[d$!"JZBfpbC@0bC@`U+LS
+U!!!!!!!!N!!!ER9XE!(p!J!!"J44!!2p!345"&-+r3%!"!TVEf0X$345!!&Y!!!
+*f`RHr3!+r3!!"!TKE'PK"J46!!2mr`48"&8+r2m!"!TTER0S$348!!)d!!!*i3R
+Tr2i%9JVmrJ!%#Q0QEf`0"&B!!@m!!!RP#HMmr3[mr3!d-!!BEh"PER0cE'PZBfa
+eC'9QEfaNCA*`BA4S!"K[F'9Z8e0-5@jME(9NC8C[E'4PFP"KG'J'"&8!!rcm"&I
+mq`Vmr!!%#R4[)#!0"&F!!Qi!!!RX#IX%@!4C$34B!!)d!!!*p!Rlr2S%@JVmqJ!
+%#QCTE'80"&S!!@d!!!Rh#IS%@``%@`!1!!KMFRP`G'mZD!!#!!!0"&N!!M3!!!R
+X#I6mq34F#[cj!!3+BfC[E!d%A!!"E`!!#I!*mrci#rci!#3`!""MFRP`G'pQEfa
+NCA*`BA4S!""MFRP`G'p'EfaNCA*3BA4S"[cl!!!#"&!!!J4G"&i0"&d!!Q`!!JS
+##J,mprcf!Ich!!!"r2B!!!)%AJ!#"&m%B!d%A`!$53!##J)+,2cer23%B3Vmp3!
+B,Q0[FQ9MFQ9X+LSU+J!!!!!!!*!!!'jeE'`"r23!!!B%B3!$r2-%BJ4M#[cc!!3
++DfpME!d%BJ!"E3!!#JB+#Icb#[cb!!3+B@aTB3B%B`!$r2%%C!4P#[ca!!3+D@j
+cD!d%C!!#0!!!#J`+&2c`"'B+r2!!"!TMCQpX$34Q!!&[!!!+%!S6r1m,r1m!0$!
+!''p`C@jcFfaTEQ0XG@4PCQpXC'9bF'&dD!!BEh"PEP066%PZBfaeC'9'EfaNCA*
+3BA4S"J4P!!2mlJ4Rr1d+r1i!"!TdEb!J$34R!!*Z!!!+&`SQ"'J%D3d%D!!#0!!
+!#Km+*[cX"'S+r1`!"!TQD@aP$34U!!&Y!!!+)JSP"'X-"'X!%!!+Eh"PER0cE(B
+ZD!!#!!!0"'N!!M3!!!SA#Krmk`4X#[cV!!3+BfC[E!d%E!!"E`!!#KX+([cU#rc
+U!#3`!""MFRP`G'pQEfaNCA*`BA4S!""MFRP`G'p'EfaNCA*3BA4S"[cY!!!#"'!
+!!J4Y"'i0"'d!!dN!!JSY#PImkIcS"'m+r1N!'#jMEh*PBh*PE#SU+LS!!!!!!!#
+3!!"ZG@aX!IcS!!!'"'m!!rcR"(!%F3Vmj`!%#QY[Bf`0"(!!!@d!!!Sa#M6mjJV
+mjJ!%#Q&XD@%'"(%!!rcP"()%F`Vmj3!%#QPZFfJ0"()!!M3!!!Sh#Mrmj!4d#[c
+N!!3+BfC[E!d%G!!"E`!!#MX+2[cM#rcM!$3`!"K[F'9ZFh0XD@jME(9NC@C[E'4
+PFR"KG'J!''p`C@j68da*EQ0XG@4P4QpXC'9b8'&dD!B%F`!$r1)%GIcK#[cL!!3
++G'mJ)!d%G3!#EJ!!#N)+834f"(F0"(B!!M3!!!T+#P(mi!4i#[cJ!!3+CQPXC3d
+%H!!"E3!!#Nd+8!4j$!4j!!i!#(4YC'PQCLjS!!)!!!d%G`!#0!!!#N)+5[cI"(S
++r0m!"!TMCQpX$34k!!&[!!!+4JT*r0i,r0i!*$!!%'0bHA"dEfC[E'4PFR"KG'J
+!%'0bHA"dEdC[E'4PFP"KG'J'r1%!!!)%EJ!#"(X%I!d%H`!#E!!##PJ+@2cGr0`
+"r0d!!!(mh!!!!J4m!!)%I34q$34p!!*X!!)+@!TBr0[mfJ(mf`!!!IcD!!!#"(i
+!!J4r")!0"(m!!dN!!JTB#S,mfIcB")%+r0N!'#jMEh*PBh*PE#SU+LS!!!!!!!#
+3!!"ZG@aX!IcB!!!'")%!!rcA"))%J`Vme`!%#QY[Bf`0"))!!@d!!!TF#PrmeJV
+meJ!%#Q&XD@%'")-!!rc9")3%K3Vme3!%#QPZFfJ0")3!!M3!!!TL#QVme!5'#[c
+8!!3+BfC[E!d%KJ!"E`!!#QB+DIc6#rc6!$3`!"K[F'9ZFh0XD@jME(9NC@C[E'4
+PFR"KG'J!''p`C@j68da*EQ0XG@4P4QpXC'9b8'&dD!B%K3!$r0)%Krc4#[c5!!3
++G'mJ)!d%K`!#EJ!!#Qd+I!5)")N0")J!!M3!!!Te#Rcmd!5+#[c3!!3+CQPXC3d
+%LJ!"E3!!#RJ+H`5,$!5,!!`!"Q9IEh-ZD!!#!!!0")N!!M3!!!TY#RAmc`5-#[c
+2!!3+BfC[E!d%M!!"E`!!#R%+G2c1#rc1!#B`!"&[F'9ZFh0XCQpXC'9bF'&dD!!
+4Eh"PER0cE%C[E'4PFP"KG'J'r0%!!!)%J!!#")d%MJd%M3!$53!##S-+VIc0r-`
+%M`Vmc3!B,Q0[FQ9MFQ9X+LSU+J!!!!!!!*!!!'jeE'`"r-`!!!B%M`!$r-X%N!!
+%N3Vmb`!%#QY[Bf`0"*!!!!&Y!!!+K`U+r-S+r-S!"!TKE'PK"J54!!2mb355"*-
++r-N!"!TTER0S$355!!)d!!!+M3U9r-J%P!Vmb!!%#Q0QEf`0"*3!!@m!!!U4#T6
+ma`[ma`!d-!!BEh"PER0cE'PZBfaeC'9QEfaNCA*`BA4S!"K[F'9Z8e0-5@jME(9
+NC8C[E'4PFP"KG'J'"*-!!rc'"*Ama3VmaJ!%#R4[)#!0"*8!!Qi!!!UB#UF%PJ5
+A$35@!!)d!!!+S!URr-3%Q!Vma!!%#QCTE'80"*J!!@d!!!UM#UB%Q3`%Q3!0!!G
+PAfpc-LjS!!)!!!d%P`!#0!!!#TJ+S2c$"*S+r--!"!TMCQpX$35D!!&[!!!+R!U
+Ir-),r-)!*M!!%@p`C@jcFfaQEfaNCA*`BA4S!"&[F'9ZFh0X4QpXC'9b8'&dD!E
+ma3!!!J51!!)%Qrc"$35E!!*X!!)+VJUZr-$m[`(m`!!!!Ibr!!!#r-%!!!d!#3!
+"E3!!!!!!!3!I!Irq!!!#!!B!!J5F"*d0"*`!!Q`!!J!!!!$m[[bp!Ibq!!!"r,d
+!!!)%R3!#"*i%R`d%RJ!#E!!##V%+b!5Jr,`0"+!!!dN!!JUa#XMmZ`5K"+)+r,X
+!'#jcHA0[C'a[Cf&cDh)!!!!!!!!!!&4&@&30"+%!!@d!!!Ua#V3%S``%S`!'!!!
+!!J!!"J5L!!2mZJ5N"+8+r,S!"!TLG'jc$35N!!&+!!!+Y`Um"+B#"+B!!J5Rr,N
+0"+F!!@d!!!Uh#VS%U!`%U!!+!!4%EfjP!!)!!!,mZ3!!"J5P!!2mZ!5Tr,F+r,J
+!"!TRDACe$35T!!&Y!!!+[`V#r,B$r,B!"3EmY`!!!Ibm!!!#"*m!!J5Ur,80"+S
+!!Q`!!J!!!!$mY2bc!Ibd!!!"r,-!!!,mY3!!$J!#!!!2%!!$!",mXJ5V"+`%V35
+Z"+m%X!5a",)%X`5d",8%YJ5hr,(mX2b[r+i"r,)!!"!%U`!3r+hmV2bVr+VmUIb
+Sr+ImT[bPr+6mSrbLr+(mS2bIr*i+r+d!'#jKCACdEf&`F'jeE'`!!)!!!!#3!!!
+U+LSU#rbX!")`!!GdD'9`BA4S!!GdD'93BA4S#rbV!"``!!adD'9[E'4NC@aTEA-
+!$(4SC8pXC%4PE'PYF`[mUJ!J-!!1G'KPF(*[DQ9MG("KG'J!$R4SC9"bEfTPBh4
+3BA4S#rbT!"B`!!PdD'9YCA"KG'J!#A4SC8eP8'&dD![mU!!Q-!!4D@jME(9NC@C
+[E'4PFR"KG'J!%@PZBfaeC'9'EfaNCA*3BA4S#rbR!$3`!"K[F'9ZFh0XD@jME(9
+NC@C[E'4PFR"KG'J!''p`C@j68da*EQ0XG@4P4QpXC'9b8'&dD![mTJ!N-!!3Bh*
+jF(4[CQpXC'9bF'&dD!!3Bh*jF(4[4QpXC'9b8'&dD![mT3!H-!!0Fh0XCQpXC'9
+bF'&dD!!0Fh0X4QpXC'9b8'&dD![mT!!Q-!!4Eh"PER0cE'C[E'4PFR"KG'J!%@p
+`C@jcFfa'EfaNCA*3BA4S#rbM!#i`!"9dD'9ZCAGQEfaNCA*bC@CPFQ9ZBf8!&A4
+SC8jPGdC[E'4PFP*PCQ9bC@jMC3[mSJ!8-!!)G'9YF("KG'J!#(4PEA"3BA4S!Ib
+K!!!"r+!!!!(mR`!!!IbH!!!1"+`!"a$mR35ir*cmQ`5j",VmQJVmR3!B,Q&PGR4
+[BA"`ER9XE!!!J!!!!*!!!#SU+LS0",J!!@X!!!!!#XJ%Z`)%Z`!#!!8%[!)%[!!
+#"*lmQ3,mQ3!!!IbF!!!#r*X!!"!%Z3!!%!5k!)B!(rbBr*ImP[b9r*6mNrb5!#c
+mNIb3!2b2r)lmMIb-!%rmL`"D!&[mLJ"Nr)N!EIb)r)ImKJ#2r)AmK2b$r),mJIb
+!r(rmI[apr(cmH`#Tr(VmHIair(F![Iaf!-ImG3$8!1)!l!$j!3-"%!%D!5F"-3%
+q!8J"93&I!@`"GJ'$!Bd"QJ'N!E%"Z`()!G)"h`(T!IB#!!)0!KF#*!)Z!MX#43*
+5!P`#D3*c!S!#LJ+A!U%#VJ+m!XB#d`,G!ZS#p!-"!`X$'!-L!bm$130'!e!$A30
+R!h3$IJ1,!jN$S`1`!lS$a`24!pi$l!2f"!-%%`3K"#m%234,"&X%D`4j")X%Q35
+Mr(3%U2acr(,mF3VmQ!!%#Q0[BQS+r*F!'#jPBA*cCQCNFQ&XDA-!!!!!!!!J!'&
+QC()+r*B!"!TMG(Kd#rb9!")`!!GdD'9`BA4S!!GdD'93BA4S#[b8!!3+BA0MFJV
+mN`!%#R4iC'`,r*)!($!!$(4SC@pXC'4PE'PYF`!-G'KP6faN4'9XD@ec#[b4!!3
++BfPdE32mN!$rr3[mM`!J-!!1G'KPF(*[DQ9MG("KG'J!$R4SC9"bEfTPBh43BA4
+S!rb1rri+r)d!"!T849K8#rb-!"B`!!PdD'9YCA"KG'J!#A4SC8eP8'&dD![mL`!
+Q-!!4D@jME(9NC@C[E'4PFR"KG'J!%@PZBfaeC'9'EfaNCA*3BA4S#rb+!$3`!"K
+[F'9ZFh0XD@jME(9NC@C[E'4PFR"KG'J!''p`C@j68da*EQ0XG@4P4QpXC'9b8'&
+dD![mL3!N-!!3Bh*jF(4[CQpXC'9bF'&dD!!3Bh*jF(4[4QpXC'9b8'&dD![mL!!
+H-!!0Fh0XCQpXC'9bF'&dD!!0Fh0X4QpXC'9b8'&dD![mK`!Q-!!4Eh"PER0cE'C
+[E'4PFR"KG'J!%@p`C@jcFfa'EfaNCA*3BA4S#[b'!!3+BfC[E!VmK3!B,QeTFf0
+cE'0d+LSU+J!!!!!!!*!!!#SU+LS+r)3!"!TcC@aP#[b$!"JZBfpbC@4PE'mU+LS
+U!!!!!!!!N!!!+LSU+J(mJJ!!![b"!!!+r)!!"!TVEf0X#[ar!!3+D@jcD!2mIJ!
+%#[ap!"JZBfpbC@0bC@`U+LSU!!!!!!!!N!!!ER9XE!VmI!!%#R*cE(3,r(X!,M!
+!&A4SC@jPGfC[E'4PFR*PCQ9bC@jMC3!9G'KP6Q9h4QpXC'9b8Q9QCA*PEQ0P#[a
+k!!3+F'jKE3VmH3!%#Q&XD@%+r(J!"!TdEb!J#[ah!!3+CQPXC32mGJ!'#rae!"3
+`!!KdC@e`F'&dD!!)G'9YF&"KG'J+r(3!"!TLG'jc#[ac!!3+CfPfG32mFJ!&#[a
+a!"JZFhPcEf4XEfGKFfYb!!!!!!!!!!"849K8%IbD#XRJ%JUYi1%TDJ`!!LrM*N9
+4e%r&jLa&edrSaHBX4Nr%@qPF@eTVA&VU-NAE6m4Ek9aE@QYF@Z`bl5C&hNr,lbA
+Y*N9J!""2bf%!%59K!")Pl5C&B!!66mYK!"3Pl5C&B!!96mYK!"BPl5C&B!!A6m[
+Y*N9J!"K2amAQ,%C2&!!L+Q%!'9m!%#pK!"PK!"S[DJ`!'dmUB3!F,'S-!"eA!!K
+B!"i!(fK2+Q%!)'%!'@%!)5TK!"PI!"![B3!L$!!M6em!*%9J!#92A`!PDJ`!'dp
+K!#BUB3!F,'%!*ba'6bTK!#"K!#KK!#%UB3!CA`!6,f%!+5TK!"R1,f%!+Q%!+bp
+K!#`-!#02A`!9B3!Y*89J!#j2+Q%!)'%!+'%!)5TK!"PI!"-[B3!T+Q%!'9m!,Lp
+K!#TK!#m[B3!X$!!M6bTK!#"K!#KK!#%UB3!CA`!6,f%!+5TK!"PI!#i[B3!UB3!
+`,f%!,!`!)dpI!"9K!$%P4@!!,NmUB3!JB3!SB3!K+Q%!'9m!%bpK!#NUB3!CA`!
+Z,f%!+Q%!-LpK!#`-!#02A`!9B3!c*89J!#j2+Q%!)'%!+'%!)5TK!"PI!"-[B3!
+T+Q%!'9m!,LpK!#TK!$3[B3!X$!!M6em!&@%!059&B!!Z6bTK!#"K!#KK!#%UB3!
+CA`!6,f%!+5TK!"PI!#i[B3!UB3!f,f%!,!`!)dpI!"9K!$FP4@!!,NmUB3!JB3!
+SB3!K+Q%!'9m!%bpK!#NUB3!CA`!Z,f%!+Q%!1#pK!#`-!#02A`!9B3!j*89J!#j
+2+Q%!)'%!+'%!)5TK!"PI!"-[B3!T+Q%!'9m!,LpK!#TK!$S[B3!X$!!M6em!&@%
+!1b9&B!!Z6bTK!#"K!#KK!#%UB3!CA`!6,f%!+5TK!"PI!#i[B3!UB3!m,f%!,!`
+!)dpI!"9K!$dP4@!!,NmUB3!JB3!SB3!K+Q%!'9m!%bpK!#NUB3!CA`!Z,f%!+Q%
+!2LpK!#`-!#02A`!9B3!r*89J!#j2+Q%!)'%!+'%!)5TK!"PI!"-[B3!T+Q%!'9m
+!,LpK!#TK!%![B3!X$!!M6em!&@%!359&B!!Z6bTK!#"K!#KK!#%UB3!CA`!6,f%
+!+5TK!"PI!#i[B3!UB3"#,f%!,!`!)dpI!"9K!%-P4@!!,NmUB3!JB3!SB3!K+Q%
+!'9m!%bpK!#NUB3!CA`!Z,f%!+Q%!4#pK!#`-!#02A`!9B3"&*89J!#j2+Q%!)'%
+!+'%!)5TK!"PI!"-[B3!T+Q%!'9m!,LpK!#TK!%B[B3!X$!!M6em!&@%!4b9&B!!
+Z6bTK!#"K!#KK!#%UB3!CA`!6,f%!+5TK!"PI!#i[B3!UB3"),f%!,!`!)dpI!"9
+K!%NP4@!!,NmUB3!JB3!SB3!K+Q%!'9m!%bpK!#NUB3!CA`!Z,f%!+Q%!5LpK!#`
+-!#02A`!9B3",*89J!#j2+Q%!)'%!+'%!)5TK!"PI!"-[B3!T+Q%!'9m!,LpK!#T
+K!%`[B3!X$!!M6em!&@%!659&B!!Z6bTK!#"K!#KK!#%UB3!CA`!6,f%!+5TK!"P
+I!#i[B3!UB3"1,f%!,!`!)dpI!"9K!%mP4@!!,NmUB3!JB3!SB3!K+Q%!'9m!%bp
+K!#NUB3!CA`!Z,f%!+Q%!8#pK!#`-!#02A`!9B3"4*89J!#j2+Q%!)'%!+'%!)5T
+K!"PI!"-[B3!T+Q%!'9m!,LpK!#TK!&)[B3!X$!!M6em!&@%!8b9&B!!Z6bTK!#"
+K!#KK!#%UB3!CA`!6,f%!+5TK!"PI!#i[B3!UB3"8,f%!,!`!)dpI!"9K!&8P4@!
+!,NmUB3!JB3!SB3!K+Q%!'9m!%bpK!#NUB3!CA`!Z,f%!+Q%!9LpK!#`-!#02A`!
+9B3"A*89J!#j2+Q%!)'%!+'%!)5TK!"PI!"-[B3!T+Q%!'9m!,LpK!#TK!&J[B3!
+X$!!M6bTK!#"K!#KK!#%UB3!CA`!6,f%!+5TK!"PI!#i[B3!UB3"C,f%!,!`!)dp
+I!"9K!&SP4@!!,NmUB3!JB3!SB3!K+Q%!'9m!%bpK!#NUB3!CA`!Z,f%!+Q%!@bp
+K!#`-!#02A`!9B3"F*89J!#j2+Q%!)'%!+'%!)5TK!"PI!"-[B3!T+Q%!'9m!,Lp
+K!#TK!&d[B3!X$!!M6em!&@%!AL9&B!!Z6bTK!#"K!#KK!#%UB3!CA`!6,f%!+5T
+K!"PI!#i[B3!UB3"I,f%!,!`!)dpI!"9K!'!P4@!!,NmUB3!JB3!SB3!K+Q%!'9m
+!%bpK!#NUB3!CA`!Z,f%!+Q%!B5pK!#`-!#02A`!9B3"L*89J!#j2+Q%!)'%!+'%
+!)5TK!"PI!"-[B3!T+Q%!'9m!,LpK!#TK!'-[B3!X$!!M6em!&@%!C#9&B!!Z6bT
+K!#"K!#KK!#%UB3!CA`!6,f%!+5TK!"PI!#i[B3!UB3"P,f%!,!`!)dpI!"9K!'B
+P4@!!,NmUB3!JB3!SB3!K+Q%!'9m!%bpK!#NUB3!CA`!Z,f%!+Q%!CbpK!#`-!#0
+2A`!9B3"S*89J!#j2+Q%!)'%!+'%!)5TK!"PI!"-[B3!T+Q%!'9m!,LpK!#TK!'N
+[B3!X$!!M6em!&@%!DL9&B!!Z6bTK!#"K!#KK!#%UB3!CA`!6,f%!+5TK!"PI!#i
+[B3!UB3"V,f%!,!`!)dmUB3!JB3!SB3!K+Q%!'9m!%bpK!#NUB3!CA`!Z,f%!+Q%
+!E#pK!#`-!#02A`!9B3"Y*89J!#j2+Q%!)'%!+'%!)5TK!"PI!"-[B3!T+Q%!'9m
+!,LpK!#TK!'i[B3!X$!!M6em!&@%!Eb9&B!!Z6bTK!#"K!#KK!#%UB3!CA`!6,f%
+!+5TK!"PI!#i[B3!UB3"`,f%!,!`!)dpI!"9K!(%P4@!!,NmUB3!JB3!SB3!K+Q%
+!'9m!%bpK!#NUB3!CA`!Z,f%!+Q%!FLpK!#`-!#02+Q%!)'%!+'%!)5TK!"PI!"-
+[B3!T+Q%!'9m!,LpK!#TK!(-[B3!X$!!M6em!&@%!G#9&B!!Z6bTK!#"K!#KK!#%
+UB3!CA`!6,f%!+5TK!"PI!#i[B3!UB3"e,f%!,!`!)dmUB3!JB3!SB3!K+Q%!'9m
+!%bpK!#NUB3!CA`!A,f%!+Q%!GLpK!#`-!#02+Q%!)'%!+'%!)5TK!"PI!"-[B3!
+T+Q%!'9m!&bpK!#TK!(F[B3!X$!!M6bTK!#"K!#KK!#%UB3!CA`!6,f%!+5TK!"P
+I!"F[B3!UB3"i,f%!,!`!)dmUB3!JB3!SB3!K+Q%!'9m!%bpK!#NUB3!CA`!A,f%
+!+Q%!H5pK!#`-!#02+Q%!)'%!+'%!)5TK!"PI!"-[B3!T+Q%!'9m!&bpK!#TK!(S
+[B3!X$!!M6bTK!#"K!#KK!#%UB3!CA`!6,f%!+5TK!"PI!"8[B3!UB3"l,f%!,!`
+!)dmUB3!JB3!SB3!K+Q%!'9m!%bpK!#NUB3!CA`!9,f%!+Q%!I#pK!#`-!#02+Q%
+!)'%!+'%!)5TK!"PI!"-[B3!T+Q%!'9m!&5pK!#TK!(d[B3!X$!!M6bTK!#"K!#K
+K!#%UB3!CA`!6,f%!+5TK!"PI!"J[B3!UB3"q,f%!,!`!)dmUB3!JB3!SB3!K+Q%
+!'9m!%bpK!#NUB3!CA`!B,f%!+Q%!IbpK!#`-!#028&92B3#!B3#"B3##DhCK!)0
+K!)4K!#)-!)82$!5Y!&%!5deKBfPZG'pcD#")4$T%CA0VG'p`)%C[E'4PFMT*EQ0
+[E@PZCcT[F'9ZFh0X,90139!Y-6Nj16%b-6%k6@&M6e-kE@YXD@jVFbjKF`!#!!!
+1"+i!!J6mF!5p!ra`!!%1",d!!3!%[J`%[J!'!!!!!J!!$J5[!!)%r'm%[`2mE`!
+%$J5r!!3!"-!%`36#"---"-!!%J!-6@&MD@jdEh0S)%K%!!)!!!`%`3!8!!j%CA0
+VG'p`)%C[E'4PFJ!#!!!-"-)!$J!)5@jMEfeTEQF!!J!!$!6$!"X!&@p`C@jcFf`
+Y8dj"8#da16Nj-6)a-3!#!!!-",!!4J"!6@&MD@jdEh0S)%K%1N4PFfYdEh!J4Qp
+XC'9b1NPZBfpYD@jR1Qp`C@jcFf`Y8dj"8#da16Nj-6)a-6T0B@028`!#!!!-",%
+!5!"#6@&MD@jdEh0S)%K%1N4PFfYdEh!J4QpXC'9b1NPZBfpYD@jR1Qp`C@jcFf`
+Y8dj"8#da16Nj-6)a-6TTEQ0XG@4P!!)!!!`%XJ"3!%T0B@0TER4[FfJJ5%3k4'9
+cDh4[F#"'EfaNCA)k5@jMEfeTEQFkEh"PER0cE#e66N&3,6%j16Na-M%a1QPZBfa
+eC'8kEh"PER0cE!!#!!!-",-!4`""6@&MD@jdEh0S)%K%1N4PFfYdEh!J4QpXC'9
+b1NPZBfpYD@jR1Qp`C@jcFf`Y8dj"8#da16Nj-6)a-6TMFRP`G'm!!J!!$!5d!%3
+!2NeKBfPZG'pcD#")4$T%CA0VG'p`)%C[E'4PFMT*EQ0[E@PZCcT[F'9ZFh0X,90
+139!Y-6Nj16%b-6%kFh0X!!)!!!`%Y3"!!$T0B@0TER4[FfJJ5%3k4'9cDh4[F#"
+'EfaNCA)k5@jMEfeTEQFkEh"PER0cE#e66N&3,6%j16Na-M%a!!)!!!i%YJ!"&!6
+%$J6%!!-B"-AmEJ6'$J6&!!-B"-ImE36)$J6(!!-B"-RmE!6+$J6*!!-B!"rmD`6
+,#[aV!!3+BfC[E!`%b`!1!!K*EQ0[E@PZC`!#!!!+r'`!"!TMCQpX$!6+!"X!&@p
+`C@jcFf`Y8dj"8#da16Nj-6)a-3!#!!!+r'd!"!TMCQpX$!6)!!d!"fPZBfaeC'8
+!!J!!#[aZ!!3+BfC[E!`%aJ!9!!peER4TG'aPC#"QEfaNCA)!!J!!$!5h!%i!5%e
+KBfPZG'pcD#")4$T%CA0VG'p`)%C[E'4PFMT*EQ0[E@PZCcT[F'9ZFh0X,90139!
+Y-6Nj16%b-6%kBh*jF(4[1RJe-$Pf-`!#!!!"r,%!!!(mX!!!!Ib[!!!"r+i!!'&
+cBh)!!3!-qYlHV3!!!3!!!*G#!!#@3J!!!AB!!$-8-0J!!!!F!AB!$h0MFhS!!!#
+#6Np853!!!)jcBh"d!!!!QP4&@&3!!3#QFh4jE!!!!,j$6d4&!!%!bN*14%`!!!$
+LBA"XG!!!!1j'8N9'!!!!qNP$6L-!!!%'D@0X0!!!!4*TBh-M!!!"(QPMFc3!!!%
+UD'CNFJ!!!6C659T&!!!"3PG3Eh-!!!&1!!$rr`!!!!!!!!!!!)$rre!!!"i!!!!
+!!)$rr`!!"cJ#DH#m"'Mrr`!!!*S!!!!!%iRrr`!!"Pi!!!!!"'Mrr`!!!53!!!!
+!!!$rrb!!!9)!!!!!!!(rra3!!@i#DG`%!)$rr`!!!Pi#DH"X!!$rr`!!!Ri!!!!
+!!)$rr`!!!S-#DH"d!*Err`!!!Si!!!!!!*Err`!!!j)!!!!!!*Err`!!"CB#DH%
+i!*Err`!!"GS#DH%dkF$rr`!!"[`!!!!!rrrrr`!!"a)!!!!!!)$rr`!!"b!!!!!
+!*4S:

MacOS/opensslconf.h

@@ -0,0 +1,126 @@
+/* MacOS/opensslconf.h */
+
+#if !(defined(VMS) || defined(__VMS)) /* VMS uses logical names instead */
+# if defined(HEADER_CRYPTLIB_H) && !defined(OPENSSLDIR)
+#  define OPENSSLDIR "/usr/local/ssl"
+# endif
+#endif
+
+#if defined(HEADER_IDEA_H) && !defined(IDEA_INT)
+# define IDEA_INT unsigned int
+#endif
+
+#if defined(HEADER_MD2_H) && !defined(MD2_INT)
+# define MD2_INT unsigned int
+#endif
+
+#if defined(HEADER_RC2_H) && !defined(RC2_INT)
+/* I need to put in a mod for the alpha - eay */
+# define RC2_INT unsigned int
+#endif
+
+#if defined(HEADER_RC4_H)
+# if !defined(RC4_INT)
+/*
+ * using int types make the structure larger but make the code faster on most
+ * boxes I have tested - up to %20 faster.
+ */
+/*-
+ * I don't know what does "most" mean, but declaring "int" is a must on:
+ * - Intel P6 because partial register stalls are very expensive;
+ * - elder Alpha because it lacks byte load/store instructions;
+ */
+#  define RC4_INT unsigned char
+# endif
+# if !defined(RC4_CHUNK)
+/*
+ * This enables code handling data aligned at natural CPU word
+ * boundary. See crypto/rc4/rc4_enc.c for further details.
+ */
+#  define RC4_CHUNK unsigned long
+# endif
+#endif
+
+#if defined(HEADER_DES_H) && !defined(DES_LONG)
+/*
+ * If this is set to 'unsigned int' on a DEC Alpha, this gives about a %20
+ * speed up (longs are 8 bytes, int's are 4).
+ */
+# ifndef DES_LONG
+#  define DES_LONG unsigned long
+# endif
+#endif
+
+#if defined(HEADER_BN_H) && !defined(CONFIG_HEADER_BN_H)
+# define CONFIG_HEADER_BN_H
+# if __option(longlong)
+#  define BN_LLONG
+# else
+#  undef BN_LLONG
+# endif
+
+/* Should we define BN_DIV2W here? */
+
+/* Only one for the following should be defined */
+/*
+ * The prime number generation stuff may not work when EIGHT_BIT but I don't
+ * care since I've only used this mode for debuging the bignum libraries
+ */
+# undef SIXTY_FOUR_BIT_LONG
+# undef SIXTY_FOUR_BIT
+# define THIRTY_TWO_BIT
+# undef SIXTEEN_BIT
+# undef EIGHT_BIT
+#endif
+
+#if defined(HEADER_RC4_LOCL_H) && !defined(CONFIG_HEADER_RC4_LOCL_H)
+# define CONFIG_HEADER_RC4_LOCL_H
+/*
+ * if this is defined data[i] is used instead of *data, this is a %20 speedup
+ * on x86
+ */
+# undef RC4_INDEX
+#endif
+
+#if defined(HEADER_BF_LOCL_H) && !defined(CONFIG_HEADER_BF_LOCL_H)
+# define CONFIG_HEADER_BF_LOCL_H
+# define BF_PTR
+#endif                          /* HEADER_BF_LOCL_H */
+
+#if defined(HEADER_DES_LOCL_H) && !defined(CONFIG_HEADER_DES_LOCL_H)
+# define CONFIG_HEADER_DES_LOCL_H
+/*
+ * the following is tweaked from a config script, that is why it is a
+ * protected undef/define
+ */
+# ifndef DES_PTR
+#  define DES_PTR
+# endif
+
+/*
+ * This helps C compiler generate the correct code for multiple functional
+ * units.  It reduces register dependancies at the expense of 2 more
+ * registers
+ */
+# ifndef DES_RISC1
+#  define DES_RISC1
+# endif
+
+# ifndef DES_RISC2
+#  undef DES_RISC2
+# endif
+
+# if defined(DES_RISC1) && defined(DES_RISC2)
+YOU SHOULD NOT HAVE BOTH DES_RISC1 AND DES_RISC2 DEFINED ! !!!!
+# endif
+/*
+ * Unroll the inner loop, this sometimes helps, sometimes hinders. Very mucy
+ * CPU dependant
+ */
+# ifndef DES_UNROLL
+#  define DES_UNROLL
+# endif
+#endif                          /* HEADER_DES_LOCL_H */
+#ifndef __POWERPC__
+# define MD32_XARRAY
+#endif

Makefile.in

@@ -1,790 +0,0 @@
-##
-## Makefile for OpenSSL
-##
-## {- join("\n## ", @autowarntext) -}
-
-VERSION={- $config{version} -}
-MAJOR={- $config{major} -}
-MINOR={- $config{minor} -}
-SHLIB_VERSION_NUMBER={- $config{shlib_version_number} -}
-SHLIB_VERSION_HISTORY={- $config{shlib_version_history} -}
-SHLIB_MAJOR={- $config{shlib_major} -}
-SHLIB_MINOR={- $config{shlib_minor} -}
-SHLIB_EXT={- $target{shared_extension} -}
-PLATFORM={- $config{target} -}
-OPTIONS={- $config{options} -}
-CONFIGURE_ARGS=({- join(", ",quotify_l(@{$config{perlargv}})) -})
-SHLIB_TARGET={- $target{shared_target} -}
-
-# HERE indicates where this Makefile lives.  This can be used to indicate
-# where sub-Makefiles are expected to be.  Currently has very limited usage,
-# and should probably not be bothered with at all.
-HERE=.
-
-# DESTDIR is for package builders so that they can configure
-# for, say, /usr/ and yet have everything installed to /tmp/somedir/usr/.
-# Normally it is left empty.
-DESTDIR=
-
-# Do not edit these manually. Use Configure with --prefix or --openssldir
-# to change this!  Short explanation in the top comment in Configure
-INSTALLTOP={- # $prefix is used in the OPENSSLDIR perl snippet
-	      #
-	      our $prefix = $config{prefix} || "/usr/local";
-              $prefix -}
-OPENSSLDIR={- #
-	      # The logic here is that if no --openssldir was given,
-	      # OPENSSLDIR will get the value from $prefix plus "/ssl".
-	      # If --openssldir was given and the value is an absolute
-	      # path, OPENSSLDIR will get its value without change.
-	      # If the value from --openssldir is a relative path,
-	      # OPENSSLDIR will get $prefix with the --openssldir
-	      # value appended as a subdirectory.
-	      #
-              use File::Spec::Functions;
-              our $openssldir =
-                  $config{openssldir} ?
-                      (file_name_is_absolute($config{openssldir}) ?
-                           $config{openssldir}
-                           : catdir($prefix, $config{openssldir}))
-                      : catdir($prefix, "ssl");
-              $openssldir -}
-LIBDIR={- #
-          # if $prefix/lib$target{multilib} is not an existing
-          # directory, then assume that it's not searched by linker
-          # automatically, in which case adding $target{multilib} suffix
-          # causes more grief than we're ready to tolerate, so don't...
-          our $multilib =
-              -d "$prefix/lib$target{multilib}" ? $target{multilib} : "";
-          our $libdir = $config{libdir} || "lib$multilib";
-          $libdir -}
-ENGINESDIR={- use File::Spec::Functions;
-              catdir($prefix,$libdir,"engines") -}
-
-# NO_IDEA - Define to build without the IDEA algorithm
-# NO_RC4  - Define to build without the RC4 algorithm
-# NO_RC2  - Define to build without the RC2 algorithm
-# THREADS - Define when building with threads, you will probably also need any
-#           system defines as well, i.e. _REENTRANT for Solaris 2.[34]
-# TERMIO  - Define the termio terminal subsystem, needed if sgtty is missing.
-# TERMIOS - Define the termios terminal subsystem, Silicon Graphics.
-# LONGCRYPT - Define to use HPUX 10.x's long password modification to crypt(3).
-# DEVRANDOM - Give this the value of the 'random device' if your OS supports
-#           one.  32 bytes will be read from this when the random
-#           number generator is initalised.
-# SSL_FORBID_ENULL - define if you want the server to be not able to use the
-#           NULL encryption ciphers.
-#
-# LOCK_DEBUG - turns on lots of lock debug output :-)
-# REF_DEBUG - turn on some xyz_free() assertions.
-# REF_PRINT - prints some stuff on structure free.
-# MFUNC - Make all Malloc/Free/Realloc calls call
-#       CRYPTO_malloc/CRYPTO_free/CRYPTO_realloc which can be setup to
-#       call application defined callbacks via CRYPTO_set_mem_functions()
-# MD5_ASM needs to be defined to use the x86 assembler for MD5
-# SHA1_ASM needs to be defined to use the x86 assembler for SHA1
-# RMD160_ASM needs to be defined to use the x86 assembler for RIPEMD160
-# Do not define B_ENDIAN or L_ENDIAN if 'unsigned long' == 8.  It must
-# equal 4.
-# PKCS1_CHECK - pkcs1 tests.
-
-CROSS_COMPILE= {- $config{cross_compile_prefix} -}
-CC= $(CROSS_COMPILE){- $target{cc} -}
-CFLAG={- our $cflags2 = join(" ",(map { "-D".$_} @{$config{defines}}),"-DOPENSSLDIR=\"\\\"\$(OPENSSLDIR)\\\"\"","-DENGINESDIR=\"\\\"\$(ENGINESDIR)\\\"\"") -} {- $config{cflags} -}
-CFLAG_Q={- $cflags2 =~ s|([\\"])|\\$1|g; $cflags2 -} {- $config{cflags} -}
-DEPFLAG= {- join(" ",map { "-D".$_} @{$config{depdefines}}) -}
-LDFLAG= {- $config{lflags} -}
-PLIB_LDFLAG= {- $config{plib_lflags} -}
-EX_LIBS= {- $config{ex_libs} -}
-EXE_EXT= {- $target{exe_extension} -}
-ARFLAGS= {- $target{arflags} -}
-AR=$(CROSS_COMPILE){- $target{ar} -} $(ARFLAGS) r
-RANLIB= {- $target{ranlib} -}
-NM= $(CROSS_COMPILE){- $target{nm} -}
-PERL= {- $config{perl} -}
-#RM= echo --
-RM= rm -f
-TAR= tar
-TARFLAGS= --no-recursion
-MAKEDEPPROG=$(CROSS_COMPILE){- $config{makedepprog} -}
-
-# We let the C compiler driver to take care of .s files. This is done in
-# order to be excused from maintaining a separate set of architecture
-# dependent assembler flags. E.g. if you throw -mcpu=ultrasparc at SPARC
-# gcc, then the driver will automatically translate it to -xarch=v8plus
-# and pass it down to assembler.
-AS=$(CC) -c
-ASFLAG=$(CFLAG)
-
-# For x86 assembler: Set PROCESSOR to 386 if you want to support
-# the 80386.
-PROCESSOR= {- $config{processor} -}
-
-# CPUID module collects small commonly used assembler snippets
-CPUID_OBJ= {- $target{cpuid_obj} -}
-BN_ASM= {- $target{bn_obj} -}
-EC_ASM= {- $target{ec_obj} -}
-DES_ENC= {- $target{des_obj} -}
-AES_ENC= {- $target{aes_obj} -}
-BF_ENC= {- $target{bf_obj} -}
-CAST_ENC= {- $target{cast_obj} -}
-RC4_ENC= {- $target{rc4_obj} -}
-RC5_ENC= {- $target{rc5_obj} -}
-MD5_ASM_OBJ= {- $target{md5_obj} -}
-SHA1_ASM_OBJ= {- $target{sha1_obj} -}
-RMD160_ASM_OBJ= {- $target{rmd160_obj} -}
-WP_ASM_OBJ= {- $target{wp_obj} -}
-CMLL_ENC= {- $target{cmll_obj} -}
-MODES_ASM_OBJ= {- $target{modes_obj} -}
-PADLOCK_ASM_OBJ= {- $target{padlock_obj} -}
-CHACHA_ENC= {- $target{chacha_obj} -}
-POLY1305_ASM_OBJ= {- $target{poly1305_obj} -}
-PERLASM_SCHEME= {- $target{perlasm_scheme} -}
-
-# Zlib stuff
-ZLIB_INCLUDE={- $withargs{zlib_include} -}
-LIBZLIB={- $withargs{zlib_lib} -}
-
-# This is the location of fipscanister.o and friends.
-# The FIPS module build will place it $(INSTALLTOP)/lib
-# but since $(INSTALLTOP) can only take the default value
-# when the module is built it will be in /usr/local/ssl/lib
-# $(INSTALLTOP) for this build may be different so hard
-# code the path.
-
-FIPSLIBDIR={- $config{fipslibdir} -}
-
-# The location of the library which contains fipscanister.o
-# normally it will be libcrypto. If not compiling in FIPS mode
-# at all this is empty making it a useful test for a FIPS compile.
-
-FIPSCANLIB={- $config{fips} ? "libcrypto" : "" -}
-
-# Shared library base address. Currently only used on Windows.
-#
-
-BASEADDR={- $config{baseaddr} -}
-
-DIRS=   {- join(" ", @{$config{dirs}}) -}
-SHLIBDIRS= crypto ssl
-INSTALL_SUBS= engines apps tools
-
-# dirs in crypto to build
-SDIRS=  {- join(" ", @{$config{sdirs}}) -}
-
-# tests to perform.  "alltests" is a special word indicating that all tests
-# should be performed.
-TESTS = alltests
-
-MAKEFILE= Makefile
-
-MANDIR=$(INSTALLTOP)/share/man
-MAN1=1
-MAN3=3
-MANSUFFIX=
-HTMLSUFFIX=html
-HTMLDIR=$(INSTALLTOP)/share/doc/$(BASENAME)/html
-SHELL=/bin/sh
-
-TOP=    .
-LIBS=   libcrypto.a libssl.a
-SHARED_CRYPTO=libcrypto$(SHLIB_EXT)
-SHARED_SSL=libssl$(SHLIB_EXT)
-SHARED_LIBS={- '$(SHARED_CRYPTO) $(SHARED_SSL)' if (!$config{no_shared}) -}
-SHARED_LDFLAG={- $target{shared_ldflag}
-                 # Unlike other OSes (like Solaris, Linux, Tru64,
-                 # IRIX) BSD run-time linkers (tested OpenBSD, NetBSD
-                 # and FreeBSD) "demand" RPATH set on .so objects.
-                 # Apparently application RPATH is not global and
-                 # does not apply to .so linked with other .so.
-                 # Problem manifests itself when libssl.so fails to
-                 # load libcrypto.so. One can argue that we should
-                 # engrave this into Makefile.shared rules or into
-                 # BSD-* config lines above. Meanwhile let's try to
-                 # be cautious and pass -rpath to linker only when
-                 # $prefix is not /usr.
-                 . ($config{target} =~ m|^BSD-| && $prefix !~ m|^/usr/.*$|
-                    ? " -Wl,-rpath,\$\$(LIBRPATH)" : "") -}
-SHARED_RCFLAG={- $target{shared_rcflag} -}
-
-GENERAL=        Makefile
-BASENAME=       openssl
-NAME=           $(BASENAME)-$(VERSION)
-TARFILE=        ../$(NAME).tar
-HEADER=         e_os.h
-
-# Directories created on install if they don't exist.
-INSTALLDIRS=	\
-		$(DESTDIR)$(INSTALLTOP)/bin \
-		$(DESTDIR)$(INSTALLTOP)/$(LIBDIR) \
-		$(DESTDIR)$(INSTALLTOP)/$(LIBDIR)/engines \
-		$(DESTDIR)$(INSTALLTOP)/$(LIBDIR)/pkgconfig \
-		$(DESTDIR)$(INSTALLTOP)/include/openssl \
-		$(DESTDIR)$(OPENSSLDIR)/misc \
-		$(DESTDIR)$(OPENSSLDIR)/certs \
-		$(DESTDIR)$(OPENSSLDIR)/private
-
-all: Makefile build_all_but_tests
-
-# as we stick to -e, CLEARENV ensures that local variables in lower
-# Makefiles remain local and variable. $${VAR+VAR} is tribute to Korn
-# shell, which [annoyingly enough] terminates unset with error if VAR
-# is not present:-( TOP= && unset TOP is tribute to HP-UX /bin/sh,
-# which terminates unset with error if no variable was present:-(
-CLEARENV=	TOP= && unset TOP $${LIB+LIB} $${LIBS+LIBS}	\
-		$${INCLUDE+INCLUDE} $${INCLUDES+INCLUDES}	\
-		$${DIR+DIR} $${DIRS+DIRS} $${SRC+SRC}		\
-		$${LIBSRC+LIBSRC} $${LIBOBJ+LIBOBJ} $${ALL+ALL}	\
-		$${HEADER+HEADER}				\
-		$${GENERAL+GENERAL} $${CFLAGS+CFLAGS}		\
-		$${ASFLAGS+ASFLAGS} $${AFLAGS+AFLAGS}		\
-		$${LDCMD+LDCMD} $${LDFLAGS+LDFLAGS} $${SCRIPTS+SCRIPTS}	\
-		$${SHAREDCMD+SHAREDCMD} $${SHAREDFLAGS+SHAREDFLAGS}	\
-		$${SHARED_LIB+SHARED_LIB} $${LIBEXTRAS+LIBEXTRAS}
-
-# LC_ALL=C ensures that error [and other] messages are delivered in
-# same language for uniform treatment.
-BUILDENV=	LC_ALL=C PLATFORM='$(PLATFORM)' PROCESSOR='$(PROCESSOR)'\
-		CC='$(CC)' CFLAG='$(CFLAG)' CFLAG_Q='$(CFLAG_Q)'	\
-		AS='$(CC)' ASFLAG='$(CFLAG) -c'			\
-		AR='$(AR)' NM='$(NM)' RANLIB='$(RANLIB)'	\
-		CROSS_COMPILE='$(CROSS_COMPILE)'	\
-		PERL='$(PERL)'	\
-		SDIRS='$(SDIRS)' LIBRPATH='$(INSTALLTOP)/$(LIBDIR)'	\
-		DESTDIR='$(DESTDIR)'		\
-		INSTALLTOP='$(INSTALLTOP)' OPENSSLDIR='$(OPENSSLDIR)'	\
-		LIBDIR='$(LIBDIR)'				\
-		DEPFLAG='$(DEPFLAG)'                    	\
-		SHARED_LDFLAG='$(SHARED_LDFLAG)'		\
-		SHARED_RCFLAG='$(SHARED_RCFLAG)'		\
-		ZLIB_INCLUDE='$(ZLIB_INCLUDE)' LIBZLIB='$(LIBZLIB)'	\
-		EXE_EXT='$(EXE_EXT)' SHARED_LIBS='$(SHARED_LIBS)'	\
-		SHLIB_EXT='$(SHLIB_EXT)' SHLIB_TARGET='$(SHLIB_TARGET)'	\
-		LDFLAG='$(LDFLAG)'				\
-		PLIB_LDFLAG='$(PLIB_LDFLAG)' EX_LIBS='$(EX_LIBS)'	\
-		CPUID_OBJ='$(CPUID_OBJ)' BN_ASM='$(BN_ASM)'	\
-		EC_ASM='$(EC_ASM)' DES_ENC='$(DES_ENC)'		\
-		AES_ENC='$(AES_ENC)' CMLL_ENC='$(CMLL_ENC)'	\
-		BF_ENC='$(BF_ENC)' CAST_ENC='$(CAST_ENC)'	\
-		RC4_ENC='$(RC4_ENC)' RC5_ENC='$(RC5_ENC)'	\
-		SHA1_ASM_OBJ='$(SHA1_ASM_OBJ)'			\
-		MD5_ASM_OBJ='$(MD5_ASM_OBJ)'			\
-		RMD160_ASM_OBJ='$(RMD160_ASM_OBJ)'		\
-		WP_ASM_OBJ='$(WP_ASM_OBJ)'			\
-		MODES_ASM_OBJ='$(MODES_ASM_OBJ)'		\
-		PADLOCK_ASM_OBJ='$(PADLOCK_ASM_OBJ)'		\
-		CHACHA_ENC='$(CHACHA_ENC)'			\
-		POLY1305_ASM_OBJ='$(POLY1305_ASM_OBJ)'		\
-		PERLASM_SCHEME='$(PERLASM_SCHEME)'		\
-		FIPSLIBDIR='${FIPSLIBDIR}'			\
-		FIPSCANLIB="$${FIPSCANLIB:-$(FIPSCANLIB)}"	\
-		THIS=$${THIS:-$@} MAKEFILE=Makefile MAKEOVERRIDES=
-# MAKEOVERRIDES= effectively "equalizes" GNU-ish and SysV-ish make flavors,
-# which in turn eliminates ambiguities in variable treatment with -e.
-
-# BUILD_CMD is a generic macro to build a given target in a given
-# subdirectory.  The target must be given through the shell variable
-# `target' and the subdirectory to build in must be given through `dir'.
-# This macro shouldn't be used directly, use RECURSIVE_BUILD_CMD or
-# BUILD_ONE_CMD instead.
-#
-# RECURSIVE_BUILD_CMD is a macro to build a given target in all
-# subdirectories defined in $(DIRS).  It requires that the target
-# is given through the shell variable `target'.
-#
-# BUILD_ONE_CMD is a macro to build a given target in a given
-# subdirectory if that subdirectory is part of $(DIRS).  It requires
-# exactly the same shell variables as BUILD_CMD.
-BUILD_CMD=  if [ -d "$$dir" ]; then \
-	    (	cd $$dir && echo "making $$target in $$dir..." && \
-		$(CLEARENV) && $(MAKE) -e $(BUILDENV) TOP=.. DIR=$$dir $$target \
-	    ) || exit 1; \
-	    fi
-RECURSIVE_BUILD_CMD=for dir in $(DIRS); do $(BUILD_CMD); done
-BUILD_ONE_CMD=\
-	if expr " $(DIRS) " : ".* $$dir " >/dev/null 2>&1; then \
-		$(BUILD_CMD); \
-	fi
-
-reflect:
-	@[ -n "$(THIS)" ] && $(CLEARENV) && $(MAKE) $(THIS) -e $(BUILDENV)
-
-sub_all: build_all
-
-build_all_but_tests: build_libs build_apps build_tools
-build_all: build_all_but_tests build_tests
-
-build_libs: build_libcrypto build_libssl openssl.pc
-
-build_libcrypto: build_crypto build_engines libcrypto.pc
-build_libssl: build_ssl libssl.pc
-
-build_crypto:
-	@dir=crypto; target=all; $(BUILD_ONE_CMD)
-build_ssl: build_crypto
-	@dir=ssl; target=all; $(BUILD_ONE_CMD)
-build_engines: build_crypto
-	@dir=engines; target=all; AS='$(CC) -c'; export AS; $(BUILD_ONE_CMD)
-
-build_apps: build_libs
-	@dir=apps; target=all; $(BUILD_ONE_CMD)
-build_tests: build_libs
-	@dir=test; target=all; $(BUILD_ONE_CMD)
-build_tools: build_libs
-	@dir=tools; target=all; $(BUILD_ONE_CMD)
-
-all_testapps: build_libs build_testapps
-build_testapps:
-	@dir=crypto; target=testapps; $(BUILD_ONE_CMD)
-
-libcrypto$(SHLIB_EXT): libcrypto.a
-	@if [ "$(SHLIB_TARGET)" != "" ]; then \
-		if [ "$(FIPSCANLIB)" = "libcrypto" ]; then \
-			FIPSLD_CC="$(CC)"; CC=fips/fipsld; \
-			export CC FIPSLD_CC; \
-		fi; \
-		$(MAKE) -e SHLIBDIRS=crypto CC="$${CC:-$(CC)}" build-shared; \
-	else \
-		echo "There's no support for shared libraries on this platform" >&2; \
-		exit 1; \
-	fi
-
-libssl$(SHLIB_EXT): libcrypto$(SHLIB_EXT) libssl.a
-	@if [ "$(SHLIB_TARGET)" != "" ]; then \
-		$(MAKE) SHLIBDIRS=ssl SHLIBDEPS='-lcrypto' build-shared; \
-	else \
-		echo "There's no support for shared libraries on this platform" >&2; \
-		exit 1; \
-	fi
-
-link-shared:
-	@ set -e; for i in $(SHLIBDIRS); do \
-		$(MAKE) -f $(HERE)/Makefile.shared -e $(BUILDENV) \
-			LIBNAME=$$i LIBVERSION=$(SHLIB_MAJOR).$(SHLIB_MINOR) \
-			LIBCOMPATVERSIONS=";$(SHLIB_VERSION_HISTORY)" \
-			symlink.$(SHLIB_TARGET); \
-		libs="$$libs -l$$i"; \
-	done
-
-build-shared: do_$(SHLIB_TARGET) link-shared
-
-do_$(SHLIB_TARGET):
-	@ set -e; libs='-L. $(SHLIBDEPS)'; for i in $(SHLIBDIRS); do \
-		$(CLEARENV) && $(MAKE) -f Makefile.shared -e $(BUILDENV) \
-			LIBNAME=$$i LIBVERSION=$(SHLIB_MAJOR).$(SHLIB_MINOR) \
-			LIBCOMPATVERSIONS=";$(SHLIB_VERSION_HISTORY)" \
-			LIBDEPS="$$libs $(EX_LIBS)" \
-			link_a.$(SHLIB_TARGET); \
-		libs="-l$$i $$libs"; \
-		case "$(PLATFORM)" in \
-		Cygwin*) \
-			rm -f apps/cyg$$i-$(SHLIB_MAJOR).$(SHLIB_MINOR).dll; \
-			rm -f test/cyg$$i-$(SHLIB_MAJOR).$(SHLIB_MINOR).dll; \
-			cp cyg$$i-$(SHLIB_MAJOR).$(SHLIB_MINOR).dll apps/; \
-			cp cyg$$i-$(SHLIB_MAJOR).$(SHLIB_MINOR).dll test/; \
-			;; \
-		mingw*) \
-			case $$i in \
-				crypto) i=libeay32;; \
-				ssl) i=ssleay32;; \
-			esac; \
-			rm -f apps/$$i.dll; \
-			rm -f test/$$i.dll; \
-			cp $$i.dll apps/; \
-			cp $$i.dll test/; \
-		esac; \
-	done
-
-libcrypto.pc: Makefile
-	@ ( echo 'prefix=$(INSTALLTOP)'; \
-	    echo 'exec_prefix=$${prefix}'; \
-	    echo 'libdir=$${exec_prefix}/$(LIBDIR)'; \
-	    echo 'includedir=$${prefix}/include'; \
-	    echo ''; \
-	    echo 'Name: OpenSSL-libcrypto'; \
-	    echo 'Description: OpenSSL cryptography library'; \
-	    echo 'Version: '$(VERSION); \
-	    echo 'Requires: '; \
-	    echo 'Libs: -L$${libdir} -lcrypto'; \
-	    echo 'Libs.private: $(EX_LIBS)'; \
-	    echo 'Cflags: -I$${includedir}' ) > libcrypto.pc
-
-libssl.pc: Makefile
-	@ ( echo 'prefix=$(INSTALLTOP)'; \
-	    echo 'exec_prefix=$${prefix}'; \
-	    echo 'libdir=$${exec_prefix}/$(LIBDIR)'; \
-	    echo 'includedir=$${prefix}/include'; \
-	    echo ''; \
-	    echo 'Name: OpenSSL-libssl'; \
-	    echo 'Description: Secure Sockets Layer and cryptography libraries'; \
-	    echo 'Version: '$(VERSION); \
-	    echo 'Requires.private: libcrypto'; \
-	    echo 'Libs: -L$${libdir} -lssl'; \
-	    echo 'Libs.private: $(EX_LIBS)'; \
-	    echo 'Cflags: -I$${includedir}' ) > libssl.pc
-
-openssl.pc: Makefile
-	@ ( echo 'prefix=$(INSTALLTOP)'; \
-	    echo 'exec_prefix=$${prefix}'; \
-	    echo 'libdir=$${exec_prefix}/$(LIBDIR)'; \
-	    echo 'includedir=$${prefix}/include'; \
-	    echo ''; \
-	    echo 'Name: OpenSSL'; \
-	    echo 'Description: Secure Sockets Layer and cryptography libraries and tools'; \
-	    echo 'Version: '$(VERSION); \
-	    echo 'Requires: libssl libcrypto' ) > openssl.pc
-
-Makefile: Makefile.in Configure config
-	@echo "Makefile is older than Makefile.in, Configure or config."
-	@echo "Reconfigure the source tree (via './config' or 'perl Configure'), please."
-	@false
-
-libclean:
-	rm -f *.map *.so *.so.* *.dylib *.dll engines/*.so engines/*.dll engines/*.dylib *.a engines/*.a */lib */*/lib
-
-clean:	libclean
-	rm -f */*/*.o */*.o *.o core a.out fluff rehash.time testlog make.log cctest cctest.c
-	rm -rf *.bak certs/.0
-	@set -e; target=clean; $(RECURSIVE_BUILD_CMD)
-	rm -f $(LIBS) tags TAGS
-	rm -f openssl.pc libssl.pc libcrypto.pc
-	rm -f speed.* .pure
-	rm -f $(TARFILE)
-
-makefile.one: files
-	$(PERL) util/mk1mf.pl >makefile.one; \
-	sh util/do_ms.sh
-
-files:
-	$(PERL) $(TOP)/util/files.pl Makefile > $(TOP)/MINFO
-	@set -e; target=files; $(RECURSIVE_BUILD_CMD)
-
-gentests:
-	@(cd test && echo "generating dummy tests (if needed)..." && \
-	$(CLEARENV) && $(MAKE) -e $(BUILDENV) TESTS='$(TESTS)' OPENSSL_DEBUG_MEMORY=on generate );
-
-rehash: rehash.time
-rehash.time: certs build_apps build_tools
-	@if [ -z "$(CROSS_COMPILE)" ]; then \
-		(OPENSSL="`pwd`/util/opensslwrap.sh"; \
-		[ -x "apps/openssl.exe" ] && OPENSSL="apps/openssl.exe" || :; \
-		OPENSSL_DEBUG_MEMORY=on; OPENSSL_CONF=/dev/null ; \
-		export OPENSSL OPENSSL_DEBUG_MEMORY OPENSSL_CONF; \
-		$$OPENSSL rehash certs/demo \
-		|| $(PERL) tools/c_rehash certs/demo) && \
-		touch rehash.time; \
-	else :; fi
-
-test:   files tests
-
-
-tests:  build_tests rehash
-	@(cd test && echo "testing..." && \
-	$(CLEARENV) && $(MAKE) -e $(BUILDENV) TOP=.. TESTS='$(TESTS)' OPENSSL_DEBUG_MEMORY=on OPENSSL_CONF=../apps/openssl.cnf tests );
-	@if [ -z "$(CROSS_COMPILE)" ]; then \
-		OPENSSL_CONF=apps/openssl.cnf util/opensslwrap.sh version -a; \
-	fi
-
-list-tests:
-	@(cd test && \
-	        $(CLEARENV) && $(MAKE) -e $(BUILDENV) TOP=.. list-tests)
-
-report:
-	@$(PERL) util/selftest.pl
-
-tags TAGS: FORCE
-	rm -f TAGS tags
-	-ctags -R .
-	-etags `find . -name '*.[ch]' -o -name '*.pm'`
-
-FORCE:
-
-depend:
-	@set -e; target=depend; $(RECURSIVE_BUILD_CMD)
-
-update: generate errors ordinals depend
-
-generate:
-	(cd apps && PERL='${PERL}' $(MAKE) generate)
-	(cd crypto/bn && PERL='${PERL}' $(MAKE) generate)
-	(cd crypto/objects && PERL='${PERL}' $(MAKE) generate)
-
-errors:
-	$(PERL) util/ck_errf.pl -strict */*.c */*/*.c
-	$(PERL) util/mkerr.pl -recurse -write
-	(cd engines; $(MAKE) PERL=$(PERL) errors)
-	(cd crypto/ct; $(MAKE) PERL=$(PERL) errors)
-
-ordinals: util/libeay.num util/ssleay.num test_ordinals TABLE
-util/libeay.num::
-	$(PERL) util/mkdef.pl crypto update
-util/ssleay.num::
-	$(PERL) util/mkdef.pl ssl update
-test_ordinals:
-	TOP=$(TOP) PERL=$(PERL) $(PERL) test/run_tests.pl test_ordinals
-
-TABLE: Configure Configurations/*.conf
-	(echo 'Output of `Configure TABLE'"':"; \
-	$(PERL) Configure TABLE) > TABLE
-
-# Build distribution tar-file. As the list of files returned by "find" is
-# pretty long, on several platforms a "too many arguments" error or similar
-# would occur. Therefore the list of files is temporarily stored into a file
-# and read directly, requiring GNU-Tar. Call "make TAR=gtar dist" if the normal
-# tar does not support the --files-from option.
-TAR_COMMAND=$(TAR) $(TARFLAGS) --files-from $(TARFILE).list \
-			       --owner 0 --group 0 \
-			       --transform 's|^|$(NAME)/|' \
-			       -cvf -
-
-$(TARFILE).list:
-	git diff --quiet HEAD
-	git ls-files | sort > $(TARFILE).list
-
-tar: $(TARFILE).list
-	find . -type d -print | xargs chmod 755
-	find . -type f -print | xargs chmod a+r
-	find . -type f -perm -0100 -print | xargs chmod a+x
-	$(TAR_COMMAND) | gzip --best > $(TARFILE).gz
-	rm -f $(TARFILE).list
-	ls -l $(TARFILE).gz
-
-tar-snap: $(TARFILE).list
-	$(TAR_COMMAND) > $(TARFILE)
-	rm -f $(TARFILE).list
-	ls -l $(TARFILE)
-
-dist:
-	$(PERL) Configure dist
-	@$(MAKE) SDIRS='$(SDIRS)' clean
-	@$(MAKE) TAR='$(TAR)' TARFLAGS='$(TARFLAGS)' $(DISTTARVARS) tar
-
-install: all install_docs install_sw
-
-uninstall: uninstall_sw uninstall_docs
-
-install_sw:
-	@$(PERL) $(TOP)/util/mkdir-p.pl $(INSTALLDIRS)
-	@set -e; for i in include/openssl/*.h; do \
-	(cp $$i $(DESTDIR)$(INSTALLTOP)/$$i; \
-	chmod 644 $(DESTDIR)$(INSTALLTOP)/$$i ); \
-	done;
-	@set -e; target=install; for dir in $(INSTALL_SUBS); do $(BUILD_CMD); done
-	@set -e; liblist="$(LIBS)"; for i in $$liblist ;\
-	do \
-		if [ -f "$$i" ]; then \
-		(       echo installing $$i; \
-			cp $$i $(DESTDIR)$(INSTALLTOP)/$(LIBDIR)/$$i.new; \
-			$(RANLIB) $(DESTDIR)$(INSTALLTOP)/$(LIBDIR)/$$i.new; \
-			chmod 644 $(DESTDIR)$(INSTALLTOP)/$(LIBDIR)/$$i.new; \
-			mv -f $(DESTDIR)$(INSTALLTOP)/$(LIBDIR)/$$i.new $(DESTDIR)$(INSTALLTOP)/$(LIBDIR)/$$i ); \
-		fi; \
-	done;
-	@set -e; if [ -n "$(SHARED_LIBS)" ]; then \
-		tmp="$(SHARED_LIBS)"; \
-		for i in $${tmp:-x}; \
-		do \
-			if [ -f "$$i" -o -f "$$i.a" ]; then \
-			(       echo installing $$i; \
-				if expr "$(PLATFORM)" : "Cygwin" >/dev/null; then \
-					c=`echo $$i | sed 's/^lib\(.*\)\.dll\.a/cyg\1-$(SHLIB_VERSION_NUMBER).dll/'`; \
-					cp $$c $(DESTDIR)$(INSTALLTOP)/bin/$$c.new; \
-					chmod 755 $(DESTDIR)$(INSTALLTOP)/bin/$$c.new; \
-					mv -f $(DESTDIR)$(INSTALLTOP)/bin/$$c.new $(DESTDIR)$(INSTALLTOP)/bin/$$c; \
-					cp $$i $(DESTDIR)$(INSTALLTOP)/$(LIBDIR)/$$i.new; \
-					chmod 644 $(DESTDIR)$(INSTALLTOP)/$(LIBDIR)/$$i.new; \
-					mv -f $(DESTDIR)$(INSTALLTOP)/$(LIBDIR)/$$i.new $(DESTDIR)$(INSTALLTOP)/$(LIBDIR)/$$i; \
-				else \
-					cp $$i $(DESTDIR)$(INSTALLTOP)/$(LIBDIR)/$$i.new; \
-					chmod 555 $(DESTDIR)$(INSTALLTOP)/$(LIBDIR)/$$i.new; \
-					mv -f $(DESTDIR)$(INSTALLTOP)/$(LIBDIR)/$$i.new $(DESTDIR)$(INSTALLTOP)/$(LIBDIR)/$$i; \
-				fi ); \
-				if expr $(PLATFORM) : 'mingw' > /dev/null; then \
-				(	case $$i in \
-						*crypto*) i=libeay32.dll;; \
-						*ssl*)    i=ssleay32.dll;; \
-					esac; \
-					echo installing $$i; \
-					cp $$i $(DESTDIR)$(INSTALLTOP)/bin/$$i.new; \
-					chmod 755 $(DESTDIR)$(INSTALLTOP)/bin/$$i.new; \
-					mv -f $(DESTDIR)$(INSTALLTOP)/bin/$$i.new $(DESTDIR)$(INSTALLTOP)/bin/$$i ); \
-				fi; \
-			fi; \
-		done; \
-		(	here="`pwd`"; \
-			cd $(DESTDIR)$(INSTALLTOP)/$(LIBDIR); \
-			$(MAKE) -f $$here/Makefile HERE="$$here" link-shared ); \
-		if [ "$(INSTALLTOP)" != "/usr" ]; then \
-			echo 'OpenSSL shared libraries have been installed in:'; \
-			echo '  $(INSTALLTOP)'; \
-		fi; \
-	fi
-	cp libcrypto.pc $(DESTDIR)$(INSTALLTOP)/$(LIBDIR)/pkgconfig
-	chmod 644 $(DESTDIR)$(INSTALLTOP)/$(LIBDIR)/pkgconfig/libcrypto.pc
-	cp libssl.pc $(DESTDIR)$(INSTALLTOP)/$(LIBDIR)/pkgconfig
-	chmod 644 $(DESTDIR)$(INSTALLTOP)/$(LIBDIR)/pkgconfig/libssl.pc
-	cp openssl.pc $(DESTDIR)$(INSTALLTOP)/$(LIBDIR)/pkgconfig
-	chmod 644 $(DESTDIR)$(INSTALLTOP)/$(LIBDIR)/pkgconfig/openssl.pc
-
-uninstall_sw:
-	cd include/openssl && files=* && cd $(DESTDIR)$(INSTALLTOP)/include/openssl && $(RM) $$files
-	@for i in $(LIBS) ;\
-	do \
-		test -f "$$i" && \
-		echo $(RM) $(DESTDIR)$(INSTALLTOP)/$(LIBDIR)/$$i && \
-		$(RM) $(DESTDIR)$(INSTALLTOP)/$(LIBDIR)/$$i; \
-	done;
-	@if [ -n "$(SHARED_LIBS)" ]; then \
-		tmp="$(SHARED_LIBS)"; \
-		for i in $${tmp:-x}; \
-		do \
-			if [ -f "$$i" -o -f "$$i.a" ]; then \
-				if expr "$(PLATFORM)" : "Cygwin" >/dev/null; then \
-					c=`echo $$i | sed 's/^lib\(.*\)\.dll\.a/cyg\1-$(SHLIB_VERSION_NUMBER).dll/'`; \
-					echo $(RM) $(DESTDIR)$(INSTALLTOP)/bin/$$c; \
-					$(RM) $(DESTDIR)$(INSTALLTOP)/bin/$$c; \
-					echo $(RM) $(DESTDIR)$(INSTALLTOP)/$(LIBDIR)/$$i; \
-					$(RM) $(DESTDIR)$(INSTALLTOP)/$(LIBDIR)/$$i; \
-				else \
-					echo $(RM) $(DESTDIR)$(INSTALLTOP)/$(LIBDIR)/$$i; \
-					$(RM) $(DESTDIR)$(INSTALLTOP)/$(LIBDIR)/$$i; \
-				fi; \
-				if expr $(PLATFORM) : 'mingw' > /dev/null; then \
-					case $$i in \
-						*crypto*) i=libeay32.dll;; \
-						*ssl*)    i=ssleay32.dll;; \
-					esac; \
-					echo $(RM) $(DESTDIR)$(INSTALLTOP)/bin/$$i; \
-					$(RM) $(DESTDIR)$(INSTALLTOP)/bin/$$i; \
-				fi; \
-			fi; \
-		done; \
-	fi
-	$(RM) $(DESTDIR)$(INSTALLTOP)/$(LIBDIR)/pkgconfig/libcrypto.pc
-	$(RM) $(DESTDIR)$(INSTALLTOP)/$(LIBDIR)/pkgconfig/libssl.pc
-	$(RM) $(DESTDIR)$(INSTALLTOP)/$(LIBDIR)/pkgconfig/openssl.pc
-	@target=uninstall; $(RECURSIVE_BUILD_CMD)
-
-install_html_docs:
-	here="`pwd`"; \
-	filecase=; \
-	case "$(PLATFORM)" in DJGPP|Cygwin*|mingw*|darwin*-*-cc) \
-		filecase=-i; \
-	esac; \
-	for subdir in apps crypto ssl; do \
-		$(PERL) $(TOP)/util/mkdir-p $(DESTDIR)$(HTMLDIR)/$$subdir; \
-		for i in doc/$$subdir/*.pod; do \
-			fn=`basename $$i .pod`; \
-			echo "installing html/$$fn.$(HTMLSUFFIX)"; \
-			cat $$i \
-			| sed -r 's/L<([^)]*)(\([0-9]\))?\|([^)]*)(\([0-9]\))?>/L<\1|\3>/g' \
-			| pod2html --podroot=doc --htmlroot=.. --podpath=$$subdir:apps:crypto:ssl \
-			| sed -r 's/<!DOCTYPE.*//g' \
-			> $(DESTDIR)$(HTMLDIR)/$$subdir/$$fn.$(HTMLSUFFIX); \
-			$(PERL) util/extract-names.pl < $$i | \
-				grep -v $$filecase "^$$fn\$$" | \
-				(cd $(DESTDIR)$(HTMLDIR)/$$subdir; \
-				 while read n; do \
-					PLATFORM=$(PLATFORM) $$here/util/point.sh $$fn.$(HTMLSUFFIX) "$$n".$(HTMLSUFFIX); \
-				 done); \
-		done; \
-	done
-
-uninstall_html_docs:
-	here="`pwd`"; \
-	filecase=; \
-	case "$(PLATFORM)" in DJGPP|Cygwin*|mingw*|darwin*-*-cc) \
-		filecase=-i; \
-	esac; \
-	for subdir in apps crypto ssl; do \
-		for i in doc/$$subdir/*.pod; do \
-			fn=`basename $$i .pod`; \
-			$(RM) $(DESTDIR)$(HTMLDIR)/$$subdir/$$fn.$(HTMLSUFFIX); \
-			$(PERL) util/extract-names.pl < $$i | \
-				grep -v $$filecase "^$$fn\$$" | \
-				while read n; do \
-					$(RM) $(DESTDIR)$(HTMLDIR)/$$subdir/"$$n".$(HTMLSUFFIX); \
-				done; \
-		done; \
-	done
-
-install_docs:
-	@$(PERL) $(TOP)/util/mkdir-p.pl \
-		$(DESTDIR)$(MANDIR)/man1 \
-		$(DESTDIR)$(MANDIR)/man3 \
-		$(DESTDIR)$(MANDIR)/man5 \
-		$(DESTDIR)$(MANDIR)/man7
-	here="`pwd`"; \
-	filecase=; \
-	case "$(PLATFORM)" in DJGPP|Cygwin*|mingw*|darwin*-*-cc) \
-		filecase=-i; \
-	esac; \
-	set -e; for i in doc/apps/*.pod; do \
-		fn=`basename $$i .pod`; \
-		sec=`$(PERL) util/extract-section.pl 1 < $$i`; \
-		echo "installing man$$sec/$$fn.$${sec}$(MANSUFFIX)"; \
-		(cd `$(PERL) util/dirname.pl $$i`; \
-		pod2man \
-			--section=$$sec --center=OpenSSL \
-			--release=$(VERSION) `basename $$i`) \
-			>  $(DESTDIR)$(MANDIR)/man$$sec/$$fn.$${sec}$(MANSUFFIX); \
-		$(PERL) util/extract-names.pl < $$i | \
-			(grep -v $$filecase "^$$fn\$$"; true) | \
-			(grep -v "[	]"; true) | \
-			(cd $(DESTDIR)$(MANDIR)/man$$sec/; \
-			 while read n; do \
-				PLATFORM=$(PLATFORM) $$here/util/point.sh $$fn.$${sec}$(MANSUFFIX) "$$n".$${sec}$(MANSUFFIX); \
-			 done); \
-	done; \
-	set -e; for i in doc/crypto/*.pod doc/ssl/*.pod; do \
-		fn=`basename $$i .pod`; \
-		sec=`$(PERL) util/extract-section.pl 3 < $$i`; \
-		echo "installing man$$sec/$$fn.$${sec}$(MANSUFFIX)"; \
-		(cd `$(PERL) util/dirname.pl $$i`; \
-		pod2man \
-			--section=$$sec --center=OpenSSL \
-			--release=$(VERSION) `basename $$i`) \
-			>  $(DESTDIR)$(MANDIR)/man$$sec/$$fn.$${sec}$(MANSUFFIX); \
-		$(PERL) util/extract-names.pl < $$i | \
-			(grep -v $$filecase "^$$fn\$$"; true) | \
-			(grep -v "[	]"; true) | \
-			(cd $(DESTDIR)$(MANDIR)/man$$sec/; \
-			 while read n; do \
-				PLATFORM=$(PLATFORM) $$here/util/point.sh $$fn.$${sec}$(MANSUFFIX) "$$n".$${sec}$(MANSUFFIX); \
-			 done); \
-	done
-
-uninstall_docs:
-	@here="`pwd`"; \
-	filecase=; \
-	case "$(PLATFORM)" in DJGPP|Cygwin*|mingw*) \
-		filecase=-i; \
-	esac; \
-	for i in doc/apps/*.pod; do \
-		fn=`basename $$i .pod`; \
-		sec=`$(PERL) util/extract-section.pl 1 < $$i`; \
-		echo $(RM) $(DESTDIR)$(MANDIR)/man$$sec/$$fn.$${sec}$(MANSUFFIX); \
-		$(RM) $(DESTDIR)$(MANDIR)/man$$sec/$$fn.$${sec}$(MANSUFFIX); \
-		$(PERL) util/extract-names.pl < $$i | \
-			(grep -v $$filecase "^$$fn\$$"; true) | \
-			(grep -v "[	]"; true) | \
-			while read n; do \
-				echo $(RM) $(DESTDIR)$(MANDIR)/man$$sec/"$$n".$${sec}$(MANSUFFIX); \
-				$(RM) $(DESTDIR)$(MANDIR)/man$$sec/"$$n".$${sec}$(MANSUFFIX); \
-			done; \
-	done; \
-	for i in doc/crypto/*.pod doc/ssl/*.pod; do \
-		fn=`basename $$i .pod`; \
-		sec=`$(PERL) util/extract-section.pl 3 < $$i`; \
-		echo $(RM) $(DESTDIR)$(MANDIR)/man$$sec/$$fn.$${sec}$(MANSUFFIX); \
-		$(RM) $(DESTDIR)$(MANDIR)/man$$sec/$$fn.$${sec}$(MANSUFFIX); \
-		$(PERL) util/extract-names.pl < $$i | \
-			(grep -v $$filecase "^$$fn\$$"; true) | \
-			(grep -v "[	]"; true) | \
-			while read n; do \
-				echo $(RM) $(DESTDIR)$(MANDIR)/man$$sec/"$$n".$${sec}$(MANSUFFIX); \
-				$(RM) $(DESTDIR)$(MANDIR)/man$$sec/"$$n".$${sec}$(MANSUFFIX); \
-			done; \
-	done
-
-# DO NOT DELETE THIS LINE -- make depend depends on it.

Makefile.org

@@ -0,0 +1,641 @@
+##
+## Makefile for OpenSSL
+##
+
+VERSION=
+MAJOR=
+MINOR=
+SHLIB_VERSION_NUMBER=
+SHLIB_VERSION_HISTORY=
+SHLIB_MAJOR=
+SHLIB_MINOR=
+SHLIB_EXT=
+PLATFORM=dist
+OPTIONS=
+CONFIGURE_ARGS=
+SHLIB_TARGET=
+
+# HERE indicates where this Makefile lives.  This can be used to indicate
+# where sub-Makefiles are expected to be.  Currently has very limited usage,
+# and should probably not be bothered with at all.
+HERE=.
+
+# INSTALL_PREFIX is for package builders so that they can configure
+# for, say, /usr/ and yet have everything installed to /tmp/somedir/usr/.
+# Normally it is left empty.
+INSTALL_PREFIX=
+INSTALLTOP=/usr/local/ssl
+
+# Do not edit this manually. Use Configure --openssldir=DIR do change this!
+OPENSSLDIR=/usr/local/ssl
+
+# NO_IDEA - Define to build without the IDEA algorithm
+# NO_RC4  - Define to build without the RC4 algorithm
+# NO_RC2  - Define to build without the RC2 algorithm
+# THREADS - Define when building with threads, you will probably also need any
+#           system defines as well, i.e. _REENTERANT for Solaris 2.[34]
+# TERMIO  - Define the termio terminal subsystem, needed if sgtty is missing.
+# TERMIOS - Define the termios terminal subsystem, Silicon Graphics.
+# LONGCRYPT - Define to use HPUX 10.x's long password modification to crypt(3).
+# DEVRANDOM - Give this the value of the 'random device' if your OS supports
+#           one.  32 bytes will be read from this when the random
+#           number generator is initalised.
+# SSL_FORBID_ENULL - define if you want the server to be not able to use the
+#           NULL encryption ciphers.
+#
+# LOCK_DEBUG - turns on lots of lock debug output :-)
+# REF_CHECK - turn on some xyz_free() assertions.
+# REF_PRINT - prints some stuff on structure free.
+# CRYPTO_MDEBUG - turns on my 'memory leak' detecting stuff
+# MFUNC - Make all Malloc/Free/Realloc calls call
+#       CRYPTO_malloc/CRYPTO_free/CRYPTO_realloc which can be setup to
+#       call application defined callbacks via CRYPTO_set_mem_functions()
+# MD5_ASM needs to be defined to use the x86 assembler for MD5
+# SHA1_ASM needs to be defined to use the x86 assembler for SHA1
+# RMD160_ASM needs to be defined to use the x86 assembler for RIPEMD160
+# Do not define B_ENDIAN or L_ENDIAN if 'unsigned long' == 8.  It must
+# equal 4.
+# PKCS1_CHECK - pkcs1 tests.
+
+CC= cc
+CFLAG= -O
+DEPFLAG= 
+PEX_LIBS= 
+EX_LIBS= 
+EXE_EXT= 
+ARFLAGS=
+AR=ar $(ARFLAGS) r
+RANLIB= ranlib
+NM= nm
+PERL= perl
+TAR= tar
+TARFLAGS= --no-recursion
+MAKEDEPPROG=makedepend
+LIBDIR=lib
+
+# We let the C compiler driver to take care of .s files. This is done in
+# order to be excused from maintaining a separate set of architecture
+# dependent assembler flags. E.g. if you throw -mcpu=ultrasparc at SPARC
+# gcc, then the driver will automatically translate it to -xarch=v8plus
+# and pass it down to assembler.
+AS=$(CC) -c
+ASFLAG=$(CFLAG)
+
+# For x86 assembler: Set PROCESSOR to 386 if you want to support
+# the 80386.
+PROCESSOR=
+
+# CPUID module collects small commonly used assembler snippets
+CPUID_OBJ= 
+BN_ASM= bn_asm.o
+DES_ENC= des_enc.o fcrypt_b.o
+AES_ENC= aes_core.o aes_cbc.o
+BF_ENC= bf_enc.o
+CAST_ENC= c_enc.o
+RC4_ENC= rc4_enc.o
+RC5_ENC= rc5_enc.o
+MD5_ASM_OBJ= 
+SHA1_ASM_OBJ= 
+RMD160_ASM_OBJ= 
+WP_ASM_OBJ=
+CMLL_ENC=
+PERLASM_SCHEME=
+
+# KRB5 stuff
+KRB5_INCLUDES=
+LIBKRB5=
+
+# Zlib stuff
+ZLIB_INCLUDE=
+LIBZLIB=
+
+DIRS=   crypto ssl engines apps test tools
+ENGDIRS= ccgost
+SHLIBDIRS= crypto ssl
+
+# dirs in crypto to build
+SDIRS=  \
+	objects \
+	md2 md4 md5 sha mdc2 hmac ripemd whrlpool \
+	des aes rc2 rc4 rc5 idea bf cast camellia seed modes \
+	bn ec rsa dsa ecdsa dh ecdh dso engine \
+	buffer bio stack lhash rand err \
+	evp asn1 pem x509 x509v3 conf txt_db pkcs7 pkcs12 comp ocsp ui krb5 \
+	cms pqueue ts jpake store
+# keep in mind that the above list is adjusted by ./Configure
+# according to no-xxx arguments...
+
+# tests to perform.  "alltests" is a special word indicating that all tests
+# should be performed.
+TESTS = alltests
+
+MAKEFILE= Makefile
+
+MANDIR=$(OPENSSLDIR)/man
+MAN1=1
+MAN3=3
+MANSUFFIX=
+HTMLSUFFIX=html
+HTMLDIR=$(OPENSSLDIR)/html
+SHELL=/bin/sh
+
+TOP=    .
+ONEDIRS=out tmp
+EDIRS=  times doc bugs util include certs ms shlib mt demos perl sf dep VMS
+WDIRS=  windows
+LIBS=   libcrypto.a libssl.a
+SHARED_CRYPTO=libcrypto$(SHLIB_EXT)
+SHARED_SSL=libssl$(SHLIB_EXT)
+SHARED_LIBS=
+SHARED_LIBS_LINK_EXTS=
+SHARED_LDFLAGS=
+
+GENERAL=        Makefile
+BASENAME=       openssl
+NAME=           $(BASENAME)-$(VERSION)
+TARFILE=        $(NAME).tar
+WTARFILE=       $(NAME)-win.tar
+EXHEADER=       e_os2.h
+HEADER=         e_os.h
+
+all: Makefile build_all openssl.pc libssl.pc libcrypto.pc
+
+# as we stick to -e, CLEARENV ensures that local variables in lower
+# Makefiles remain local and variable. $${VAR+VAR} is tribute to Korn
+# shell, which [annoyingly enough] terminates unset with error if VAR
+# is not present:-( TOP= && unset TOP is tribute to HP-UX /bin/sh,
+# which terminates unset with error if no variable was present:-(
+CLEARENV=	TOP= && unset TOP $${LIB+LIB} $${LIBS+LIBS}	\
+		$${INCLUDE+INCLUDE} $${INCLUDES+INCLUDES}	\
+		$${DIR+DIR} $${DIRS+DIRS} $${SRC+SRC}		\
+		$${LIBSRC+LIBSRC} $${LIBOBJ+LIBOBJ} $${ALL+ALL}	\
+		$${EXHEADER+EXHEADER} $${HEADER+HEADER}		\
+		$${GENERAL+GENERAL} $${CFLAGS+CFLAGS}		\
+		$${ASFLAGS+ASFLAGS} $${AFLAGS+AFLAGS}		\
+		$${LDCMD+LDCMD} $${LDFLAGS+LDFLAGS} $${SCRIPTS+SCRIPTS}	\
+		$${SHAREDCMD+SHAREDCMD} $${SHAREDFLAGS+SHAREDFLAGS}	\
+		$${SHARED_LIB+SHARED_LIB} $${LIBEXTRAS+LIBEXTRAS}
+
+BUILDENV=	PLATFORM='$(PLATFORM)' PROCESSOR='$(PROCESSOR)' \
+		CC='$(CC)' CFLAG='$(CFLAG)' 			\
+		AS='$(CC)' ASFLAG='$(CFLAG) -c'			\
+		AR='$(AR)' NM='$(NM)' RANLIB='$(RANLIB)'	\
+		CROSS_COMPILE='$(CROSS_COMPILE)'	\
+		PERL='$(PERL)' ENGDIRS='$(ENGDIRS)'		\
+		SDIRS='$(SDIRS)' LIBRPATH='$(INSTALLTOP)/$(LIBDIR)'	\
+		INSTALL_PREFIX='$(INSTALL_PREFIX)'		\
+		INSTALLTOP='$(INSTALLTOP)' OPENSSLDIR='$(OPENSSLDIR)'	\
+		LIBDIR='$(LIBDIR)'				\
+		MAKEDEPEND='$$$${TOP}/util/domd $$$${TOP} -MD $(MAKEDEPPROG)' \
+		DEPFLAG='-DOPENSSL_NO_DEPRECATED $(DEPFLAG)'	\
+		MAKEDEPPROG='$(MAKEDEPPROG)'			\
+		SHARED_LDFLAGS='$(SHARED_LDFLAGS)'		\
+		KRB5_INCLUDES='$(KRB5_INCLUDES)' LIBKRB5='$(LIBKRB5)'	\
+		ZLIB_INCLUDE='$(ZLIB_INCLUDE)' LIBZLIB='$(LIBZLIB)'	\
+		EXE_EXT='$(EXE_EXT)' SHARED_LIBS='$(SHARED_LIBS)'	\
+		SHLIB_EXT='$(SHLIB_EXT)' SHLIB_TARGET='$(SHLIB_TARGET)'	\
+		PEX_LIBS='$(PEX_LIBS)' EX_LIBS='$(EX_LIBS)'	\
+		CPUID_OBJ='$(CPUID_OBJ)'			\
+		BN_ASM='$(BN_ASM)' DES_ENC='$(DES_ENC)' 	\
+		AES_ENC='$(AES_ENC)' CMLL_ENC='$(CMLL_ENC)'	\
+		BF_ENC='$(BF_ENC)' CAST_ENC='$(CAST_ENC)'	\
+		RC4_ENC='$(RC4_ENC)' RC5_ENC='$(RC5_ENC)'	\
+		SHA1_ASM_OBJ='$(SHA1_ASM_OBJ)'			\
+		MD5_ASM_OBJ='$(MD5_ASM_OBJ)'			\
+		RMD160_ASM_OBJ='$(RMD160_ASM_OBJ)'		\
+		WP_ASM_OBJ='$(WP_ASM_OBJ)'			\
+		PERLASM_SCHEME='$(PERLASM_SCHEME)'		\
+		THIS=$${THIS:-$@} MAKEFILE=Makefile MAKEOVERRIDES=
+# MAKEOVERRIDES= effectively "equalizes" GNU-ish and SysV-ish make flavors,
+# which in turn eliminates ambiguities in variable treatment with -e.
+
+# BUILD_CMD is a generic macro to build a given target in a given
+# subdirectory.  The target must be given through the shell variable
+# `target' and the subdirectory to build in must be given through `dir'.
+# This macro shouldn't be used directly, use RECURSIVE_BUILD_CMD or
+# BUILD_ONE_CMD instead.
+#
+# BUILD_ONE_CMD is a macro to build a given target in a given
+# subdirectory if that subdirectory is part of $(DIRS).  It requires
+# exactly the same shell variables as BUILD_CMD.
+#
+# RECURSIVE_BUILD_CMD is a macro to build a given target in all
+# subdirectories defined in $(DIRS).  It requires that the target
+# is given through the shell variable `target'.
+BUILD_CMD=  if [ -d "$$dir" ]; then \
+	    (	cd $$dir && echo "making $$target in $$dir..." && \
+		$(CLEARENV) && $(MAKE) -e $(BUILDENV) TOP=.. DIR=$$dir $$target \
+	    ) || exit 1; \
+	    fi
+RECURSIVE_BUILD_CMD=for dir in $(DIRS); do $(BUILD_CMD); done
+BUILD_ONE_CMD=\
+	if expr " $(DIRS) " : ".* $$dir " >/dev/null 2>&1; then \
+		$(BUILD_CMD); \
+	fi
+
+reflect:
+	@[ -n "$(THIS)" ] && $(CLEARENV) && $(MAKE) $(THIS) -e $(BUILDENV)
+
+sub_all: build_all
+build_all: build_libs build_apps build_tests build_tools
+
+build_libs: build_crypto build_ssl build_engines
+
+build_crypto:
+	@dir=crypto; target=all; $(BUILD_ONE_CMD)
+build_ssl:
+	@dir=ssl; target=all; $(BUILD_ONE_CMD)
+build_engines:
+	@dir=engines; target=all; $(BUILD_ONE_CMD)
+build_apps:
+	@dir=apps; target=all; $(BUILD_ONE_CMD)
+build_tests:
+	@dir=test; target=all; $(BUILD_ONE_CMD)
+build_tools:
+	@dir=tools; target=all; $(BUILD_ONE_CMD)
+
+all_testapps: build_libs build_testapps
+build_testapps:
+	@dir=crypto; target=testapps; $(BUILD_ONE_CMD)
+
+libcrypto$(SHLIB_EXT): libcrypto.a
+	@if [ "$(SHLIB_TARGET)" != "" ]; then \
+		$(MAKE) SHLIBDIRS=crypto build-shared; \
+	else \
+		echo "There's no support for shared libraries on this platform" >&2; \
+		exit 1; \
+	fi
+
+libssl$(SHLIB_EXT): libcrypto$(SHLIB_EXT) libssl.a
+	@if [ "$(SHLIB_TARGET)" != "" ]; then \
+		$(MAKE) SHLIBDIRS=ssl SHLIBDEPS='-lcrypto' build-shared; \
+	else \
+		echo "There's no support for shared libraries on this platform" >&2; \
+		exit 1; \
+	fi
+
+clean-shared:
+	@set -e; for i in $(SHLIBDIRS); do \
+		if [ -n "$(SHARED_LIBS_LINK_EXTS)" ]; then \
+			tmp="$(SHARED_LIBS_LINK_EXTS)"; \
+			for j in $${tmp:-x}; do \
+				( set -x; rm -f lib$$i$$j ); \
+			done; \
+		fi; \
+		( set -x; rm -f lib$$i$(SHLIB_EXT) ); \
+		if [ "$(PLATFORM)" = "Cygwin" ]; then \
+			( set -x; rm -f cyg$$i$(SHLIB_EXT) lib$$i$(SHLIB_EXT).a ); \
+		fi; \
+	done
+
+link-shared:
+	@ set -e; for i in $(SHLIBDIRS); do \
+		$(MAKE) -f $(HERE)/Makefile.shared -e $(BUILDENV) \
+			LIBNAME=$$i LIBVERSION=$(SHLIB_MAJOR).$(SHLIB_MINOR) \
+			LIBCOMPATVERSIONS=";$(SHLIB_VERSION_HISTORY)" \
+			symlink.$(SHLIB_TARGET); \
+		libs="$$libs -l$$i"; \
+	done
+
+build-shared: do_$(SHLIB_TARGET) link-shared
+
+do_$(SHLIB_TARGET):
+	@ set -e; libs='-L. $(SHLIBDEPS)'; for i in $(SHLIBDIRS); do \
+		if [ "$$i" = "ssl" -a -n "$(LIBKRB5)" ]; then \
+			libs="$(LIBKRB5) $$libs"; \
+		fi; \
+		$(CLEARENV) && $(MAKE) -f Makefile.shared -e $(BUILDENV) \
+			LIBNAME=$$i LIBVERSION=$(SHLIB_MAJOR).$(SHLIB_MINOR) \
+			LIBCOMPATVERSIONS=";$(SHLIB_VERSION_HISTORY)" \
+			LIBDEPS="$$libs $(EX_LIBS)" \
+			link_a.$(SHLIB_TARGET); \
+		libs="-l$$i $$libs"; \
+	done
+
+libcrypto.pc: Makefile
+	@ ( echo 'prefix=$(INSTALLTOP)'; \
+	    echo 'exec_prefix=$${prefix}'; \
+	    echo 'libdir=$${exec_prefix}/$(LIBDIR)'; \
+	    echo 'includedir=$${prefix}/include'; \
+	    echo ''; \
+	    echo 'Name: OpenSSL-libcrypto'; \
+	    echo 'Description: OpenSSL cryptography library'; \
+	    echo 'Version: '$(VERSION); \
+	    echo 'Requires: '; \
+	    echo 'Libs: -L$${libdir} -lcrypto'; \
+	    echo 'Libs.private: $(EX_LIBS)'; \
+	    echo 'Cflags: -I$${includedir} $(KRB5_INCLUDES)' ) > libcrypto.pc
+
+libssl.pc: Makefile
+	@ ( echo 'prefix=$(INSTALLTOP)'; \
+	    echo 'exec_prefix=$${prefix}'; \
+	    echo 'libdir=$${exec_prefix}/$(LIBDIR)'; \
+	    echo 'includedir=$${prefix}/include'; \
+	    echo ''; \
+	    echo 'Name: OpenSSL'; \
+	    echo 'Description: Secure Sockets Layer and cryptography libraries'; \
+	    echo 'Version: '$(VERSION); \
+	    echo 'Requires: '; \
+	    echo 'Libs: -L$${libdir} -lssl -lcrypto'; \
+	    echo 'Libs.private: $(EX_LIBS)'; \
+	    echo 'Cflags: -I$${includedir} $(KRB5_INCLUDES)' ) > libssl.pc
+
+openssl.pc: Makefile
+	@ ( echo 'prefix=$(INSTALLTOP)'; \
+	    echo 'exec_prefix=$${prefix}'; \
+	    echo 'libdir=$${exec_prefix}/$(LIBDIR)'; \
+	    echo 'includedir=$${prefix}/include'; \
+	    echo ''; \
+	    echo 'Name: OpenSSL'; \
+	    echo 'Description: Secure Sockets Layer and cryptography libraries and tools'; \
+	    echo 'Version: '$(VERSION); \
+	    echo 'Requires: '; \
+	    echo 'Libs: -L$${libdir} -lssl -lcrypto'; \
+	    echo 'Libs.private: $(EX_LIBS)'; \
+	    echo 'Cflags: -I$${includedir} $(KRB5_INCLUDES)' ) > openssl.pc
+
+Makefile: Makefile.org Configure config
+	@echo "Makefile is older than Makefile.org, Configure or config."
+	@echo "Reconfigure the source tree (via './config' or 'perl Configure'), please."
+	@false
+
+libclean:
+	rm -f *.map *.so *.so.* *.dll engines/*.so engines/*.dll *.a engines/*.a */lib */*/lib
+
+clean:	libclean
+	rm -f shlib/*.o *.o core a.out fluff rehash.time testlog make.log cctest cctest.c
+	@set -e; target=clean; $(RECURSIVE_BUILD_CMD)
+	rm -f $(LIBS)
+	rm -f openssl.pc libssl.pc libcrypto.pc
+	rm -f speed.* .pure
+	rm -f $(TARFILE)
+	@set -e; for i in $(ONEDIRS) ;\
+	do \
+	rm -fr $$i/*; \
+	done
+
+makefile.one: files
+	$(PERL) util/mk1mf.pl >makefile.one; \
+	sh util/do_ms.sh
+
+files:
+	$(PERL) $(TOP)/util/files.pl Makefile > $(TOP)/MINFO
+	@set -e; target=files; $(RECURSIVE_BUILD_CMD)
+
+links:
+	@$(PERL) $(TOP)/util/mkdir-p.pl include/openssl
+	@$(PERL) $(TOP)/util/mklink.pl include/openssl $(EXHEADER)
+	@set -e; target=links; $(RECURSIVE_BUILD_CMD)
+
+gentests:
+	@(cd test && echo "generating dummy tests (if needed)..." && \
+	$(CLEARENV) && $(MAKE) -e $(BUILDENV) TESTS='$(TESTS)' OPENSSL_DEBUG_MEMORY=on generate );
+
+dclean:
+	rm -rf *.bak include/openssl certs/.0
+	@set -e; target=dclean; $(RECURSIVE_BUILD_CMD)
+
+rehash: rehash.time
+rehash.time: certs apps
+	@if [ -z "$(CROSS_COMPILE)" ]; then \
+		(OPENSSL="`pwd`/util/opensslwrap.sh"; \
+		[ -x "apps/openssl.exe" ] && OPENSSL="apps/openssl.exe" || :; \
+		OPENSSL_DEBUG_MEMORY=on; \
+		export OPENSSL OPENSSL_DEBUG_MEMORY; \
+		$(PERL) tools/c_rehash certs) && \
+		touch rehash.time; \
+	else :; fi
+
+test:   tests
+
+tests: rehash
+	@(cd test && echo "testing..." && \
+	$(CLEARENV) && $(MAKE) -e $(BUILDENV) TOP=.. TESTS='$(TESTS)' OPENSSL_DEBUG_MEMORY=on OPENSSL_CONF=../apps/openssl.cnf tests );
+	OPENSSL_CONF=apps/openssl.cnf util/opensslwrap.sh version -a
+
+report:
+	@$(PERL) util/selftest.pl
+
+depend:
+	@set -e; target=depend; $(RECURSIVE_BUILD_CMD)
+
+lint:
+	@set -e; target=lint; $(RECURSIVE_BUILD_CMD)
+
+tags:
+	rm -f TAGS
+	find . -name '[^.]*.[ch]' | xargs etags -a
+
+errors:
+	$(PERL) util/mkerr.pl -recurse -write
+	(cd engines; $(MAKE) PERL=$(PERL) errors)
+	$(PERL) util/ck_errf.pl */*.c */*/*.c
+
+stacks:
+	$(PERL) util/mkstack.pl -write
+
+util/libeay.num::
+	$(PERL) util/mkdef.pl crypto update
+
+util/ssleay.num::
+	$(PERL) util/mkdef.pl ssl update
+
+crypto/objects/obj_dat.h: crypto/objects/obj_dat.pl crypto/objects/obj_mac.h
+	$(PERL) crypto/objects/obj_dat.pl crypto/objects/obj_mac.h crypto/objects/obj_dat.h
+crypto/objects/obj_mac.h: crypto/objects/objects.pl crypto/objects/objects.txt crypto/objects/obj_mac.num
+	$(PERL) crypto/objects/objects.pl crypto/objects/objects.txt crypto/objects/obj_mac.num crypto/objects/obj_mac.h
+crypto/objects/obj_xref.h: crypto/objects/objxref.pl crypto/objects/obj_xref.txt crypto/objects/obj_mac.num
+	$(PERL) crypto/objects/objxref.pl crypto/objects/obj_mac.num crypto/objects/obj_xref.txt >crypto/objects/obj_xref.h
+
+apps/openssl-vms.cnf: apps/openssl.cnf
+	$(PERL) VMS/VMSify-conf.pl < apps/openssl.cnf > apps/openssl-vms.cnf
+
+crypto/bn/bn_prime.h: crypto/bn/bn_prime.pl
+	$(PERL) crypto/bn/bn_prime.pl >crypto/bn/bn_prime.h
+
+
+TABLE: Configure
+	(echo 'Output of `Configure TABLE'"':"; \
+	$(PERL) Configure TABLE) > TABLE
+
+update: errors stacks util/libeay.num util/ssleay.num crypto/objects/obj_dat.h crypto/objects/obj_xref.h apps/openssl-vms.cnf crypto/bn/bn_prime.h TABLE depend
+
+# Build distribution tar-file. As the list of files returned by "find" is
+# pretty long, on several platforms a "too many arguments" error or similar
+# would occur. Therefore the list of files is temporarily stored into a file
+# and read directly, requiring GNU-Tar. Call "make TAR=gtar dist" if the normal
+# tar does not support the --files-from option.
+tar:
+	find . -type d -print | xargs chmod 755
+	find . -type f -print | xargs chmod a+r
+	find . -type f -perm -0100 -print | xargs chmod a+x
+	find * \! -path CVS/\* \! -path \*/CVS/\* \! -name CVS \! -name .cvsignore \! -name STATUS \! -name TABLE | sort > ../$(TARFILE).list; \
+	$(TAR) $(TARFLAGS) --files-from ../$(TARFILE).list -cvf - | \
+	tardy --user_number=0  --user_name=openssl \
+	      --group_number=0 --group_name=openssl \
+	      --prefix=openssl-$(VERSION) - |\
+	gzip --best >../$(TARFILE).gz; \
+	rm -f ../$(TARFILE).list; \
+	ls -l ../$(TARFILE).gz
+
+tar-snap:
+	@$(TAR) $(TARFLAGS) -cvf - \
+		`find * \! -path CVS/\* \! -path \*/CVS/\* \! -name CVS \! -name .cvsignore \! -name STATUS \! -name TABLE \! -name '*.o' \! -name '*.a' \! -name '*.so' \! -name '*.so.*'  \! -name 'openssl' \! -name '*test' \! -name '.#*' \! -name '*~' | sort` |\
+	tardy --user_number=0  --user_name=openssl \
+	      --group_number=0 --group_name=openssl \
+	      --prefix=openssl-$(VERSION) - > ../$(TARFILE);\
+	ls -l ../$(TARFILE)
+
+dist:   
+	$(PERL) Configure dist
+	@$(MAKE) dist_pem_h
+	@$(MAKE) SDIRS='$(SDIRS)' clean
+	@$(MAKE) TAR='$(TAR)' TARFLAGS='$(TARFLAGS)' tar
+
+dist_pem_h:
+	(cd crypto/pem; $(MAKE) -e $(BUILDENV) pem.h; $(MAKE) clean)
+
+install: all install_docs install_sw
+
+install_sw:
+	@$(PERL) $(TOP)/util/mkdir-p.pl $(INSTALL_PREFIX)$(INSTALLTOP)/bin \
+		$(INSTALL_PREFIX)$(INSTALLTOP)/$(LIBDIR) \
+		$(INSTALL_PREFIX)$(INSTALLTOP)/$(LIBDIR)/engines \
+		$(INSTALL_PREFIX)$(INSTALLTOP)/$(LIBDIR)/pkgconfig \
+		$(INSTALL_PREFIX)$(INSTALLTOP)/include/openssl \
+		$(INSTALL_PREFIX)$(OPENSSLDIR)/misc \
+		$(INSTALL_PREFIX)$(OPENSSLDIR)/certs \
+		$(INSTALL_PREFIX)$(OPENSSLDIR)/private
+	@set -e; headerlist="$(EXHEADER)"; for i in $$headerlist;\
+	do \
+	(cp $$i $(INSTALL_PREFIX)$(INSTALLTOP)/include/openssl/$$i; \
+	chmod 644 $(INSTALL_PREFIX)$(INSTALLTOP)/include/openssl/$$i ); \
+	done;
+	@set -e; target=install; $(RECURSIVE_BUILD_CMD)
+	@set -e; for i in $(LIBS) ;\
+	do \
+		if [ -f "$$i" ]; then \
+		(       echo installing $$i; \
+			cp $$i $(INSTALL_PREFIX)$(INSTALLTOP)/$(LIBDIR)/$$i.new; \
+			$(RANLIB) $(INSTALL_PREFIX)$(INSTALLTOP)/$(LIBDIR)/$$i.new; \
+			chmod 644 $(INSTALL_PREFIX)$(INSTALLTOP)/$(LIBDIR)/$$i.new; \
+			mv -f $(INSTALL_PREFIX)$(INSTALLTOP)/$(LIBDIR)/$$i.new $(INSTALL_PREFIX)$(INSTALLTOP)/$(LIBDIR)/$$i ); \
+		fi; \
+	done;
+	@set -e; if [ -n "$(SHARED_LIBS)" ]; then \
+		tmp="$(SHARED_LIBS)"; \
+		for i in $${tmp:-x}; \
+		do \
+			if [ -f "$$i" -o -f "$$i.a" ]; then \
+			(       echo installing $$i; \
+				if [ "$(PLATFORM)" != "Cygwin" ]; then \
+					cp $$i $(INSTALL_PREFIX)$(INSTALLTOP)/$(LIBDIR)/$$i.new; \
+					chmod 555 $(INSTALL_PREFIX)$(INSTALLTOP)/$(LIBDIR)/$$i.new; \
+					mv -f $(INSTALL_PREFIX)$(INSTALLTOP)/$(LIBDIR)/$$i.new $(INSTALL_PREFIX)$(INSTALLTOP)/$(LIBDIR)/$$i; \
+				else \
+					c=`echo $$i | sed 's/^lib\(.*\)\.dll\.a/cyg\1-$(SHLIB_VERSION_NUMBER).dll/'`; \
+					cp $$c $(INSTALL_PREFIX)$(INSTALLTOP)/bin/$$c.new; \
+					chmod 755 $(INSTALL_PREFIX)$(INSTALLTOP)/bin/$$c.new; \
+					mv -f $(INSTALL_PREFIX)$(INSTALLTOP)/bin/$$c.new $(INSTALL_PREFIX)$(INSTALLTOP)/bin/$$c; \
+					cp $$i $(INSTALL_PREFIX)$(INSTALLTOP)/$(LIBDIR)/$$i.new; \
+					chmod 644 $(INSTALL_PREFIX)$(INSTALLTOP)/$(LIBDIR)/$$i.new; \
+					mv -f $(INSTALL_PREFIX)$(INSTALLTOP)/$(LIBDIR)/$$i.new $(INSTALL_PREFIX)$(INSTALLTOP)/$(LIBDIR)/$$i; \
+				fi ); \
+				if expr $(PLATFORM) : 'mingw' > /dev/null; then \
+				(	case $$i in \
+						*crypto*) i=libeay32.dll;; \
+						*ssl*)    i=ssleay32.dll;; \
+					esac; \
+					echo installing $$i; \
+	 				cp $$i $(INSTALL_PREFIX)$(INSTALLTOP)/bin/$$i.new; \
+	 				chmod 755 $(INSTALL_PREFIX)$(INSTALLTOP)/bin/$$i.new; \
+	 				mv -f $(INSTALL_PREFIX)$(INSTALLTOP)/bin/$$i.new $(INSTALL_PREFIX)$(INSTALLTOP)/bin/$$i ); \
+				fi; \
+			fi; \
+		done; \
+		(	here="`pwd`"; \
+			cd $(INSTALL_PREFIX)$(INSTALLTOP)/$(LIBDIR); \
+			$(MAKE) -f $$here/Makefile HERE="$$here" link-shared ); \
+		if [ "$(INSTALLTOP)" != "/usr" ]; then \
+			echo 'OpenSSL shared libraries have been installed in:'; \
+			echo '  $(INSTALLTOP)'; \
+			echo ''; \
+			sed -e '1,/^$$/d' doc/openssl-shared.txt; \
+		fi; \
+	fi
+	cp libcrypto.pc $(INSTALL_PREFIX)$(INSTALLTOP)/$(LIBDIR)/pkgconfig
+	chmod 644 $(INSTALL_PREFIX)$(INSTALLTOP)/$(LIBDIR)/pkgconfig/libcrypto.pc
+	cp libssl.pc $(INSTALL_PREFIX)$(INSTALLTOP)/$(LIBDIR)/pkgconfig
+	chmod 644 $(INSTALL_PREFIX)$(INSTALLTOP)/$(LIBDIR)/pkgconfig/libssl.pc
+	cp openssl.pc $(INSTALL_PREFIX)$(INSTALLTOP)/$(LIBDIR)/pkgconfig
+	chmod 644 $(INSTALL_PREFIX)$(INSTALLTOP)/$(LIBDIR)/pkgconfig/openssl.pc
+
+install_html_docs:
+	here="`pwd`"; \
+	for subdir in apps crypto ssl; do \
+		mkdir -p $(INSTALL_PREFIX)$(HTMLDIR)/$$subdir; \
+		for i in doc/$$subdir/*.pod; do \
+			fn=`basename $$i .pod`; \
+			echo "installing html/$$fn.$(HTMLSUFFIX)"; \
+			cat $$i \
+			| sed -r 's/L<([^)]*)(\([0-9]\))?\|([^)]*)(\([0-9]\))?>/L<\1|\3>/g' \
+			| pod2html --podroot=doc --htmlroot=.. --podpath=apps:crypto:ssl \
+			| sed -r 's/<!DOCTYPE.*//g' \
+			> $(INSTALL_PREFIX)$(HTMLDIR)/$$subdir/$$fn.$(HTMLSUFFIX); \
+			$(PERL) util/extract-names.pl < $$i | \
+				grep -v $$filecase "^$$fn\$$" | \
+				(cd $(INSTALL_PREFIX)$(HTMLDIR)/$$subdir; \
+				 while read n; do \
+					PLATFORM=$(PLATFORM) $$here/util/point.sh $$fn.$(HTMLSUFFIX) "$$n".$(HTMLSUFFIX); \
+				 done); \
+		done; \
+	done
+
+install_docs:
+	@$(PERL) $(TOP)/util/mkdir-p.pl \
+		$(INSTALL_PREFIX)$(MANDIR)/man1 \
+		$(INSTALL_PREFIX)$(MANDIR)/man3 \
+		$(INSTALL_PREFIX)$(MANDIR)/man5 \
+		$(INSTALL_PREFIX)$(MANDIR)/man7
+	@pod2man="`cd ./util; ./pod2mantest $(PERL)`"; \
+	here="`pwd`"; \
+	filecase=; \
+	if [ "$(PLATFORM)" = "DJGPP" -o "$(PLATFORM)" = "Cygwin" -o "$(PLATFORM)" = "mingw" ]; then \
+		filecase=-i; \
+	fi; \
+	set -e; for i in doc/apps/*.pod; do \
+		fn=`basename $$i .pod`; \
+		sec=`$(PERL) util/extract-section.pl 1 < $$i`; \
+		echo "installing man$$sec/$$fn.$${sec}$(MANSUFFIX)"; \
+		(cd `$(PERL) util/dirname.pl $$i`; \
+		sh -c "$$pod2man \
+			--section=$$sec --center=OpenSSL \
+			--release=$(VERSION) `basename $$i`") \
+			>  $(INSTALL_PREFIX)$(MANDIR)/man$$sec/$$fn.$${sec}$(MANSUFFIX); \
+		$(PERL) util/extract-names.pl < $$i | \
+			(grep -v $$filecase "^$$fn\$$"; true) | \
+			(grep -v "[	]"; true) | \
+			(cd $(INSTALL_PREFIX)$(MANDIR)/man$$sec/; \
+			 while read n; do \
+				PLATFORM=$(PLATFORM) $$here/util/point.sh $$fn.$${sec}$(MANSUFFIX) "$$n".$${sec}$(MANSUFFIX); \
+			 done); \
+	done; \
+	set -e; for i in doc/crypto/*.pod doc/ssl/*.pod; do \
+		fn=`basename $$i .pod`; \
+		sec=`$(PERL) util/extract-section.pl 3 < $$i`; \
+		echo "installing man$$sec/$$fn.$${sec}$(MANSUFFIX)"; \
+		(cd `$(PERL) util/dirname.pl $$i`; \
+		sh -c "$$pod2man \
+			--section=$$sec --center=OpenSSL \
+			--release=$(VERSION) `basename $$i`") \
+			>  $(INSTALL_PREFIX)$(MANDIR)/man$$sec/$$fn.$${sec}$(MANSUFFIX); \
+		$(PERL) util/extract-names.pl < $$i | \
+			(grep -v $$filecase "^$$fn\$$"; true) | \
+			(grep -v "[	]"; true) | \
+			(cd $(INSTALL_PREFIX)$(MANDIR)/man$$sec/; \
+			 while read n; do \
+				PLATFORM=$(PLATFORM) $$here/util/point.sh $$fn.$${sec}$(MANSUFFIX) "$$n".$${sec}$(MANSUFFIX); \
+			 done); \
+	done
+
+# DO NOT DELETE THIS LINE -- make depend depends on it.

Makefile.shared

@@ -11,12 +11,8 @@ CFLAGS=$(CFLAG)
 # LDFLAGS contains flags to be used when temporary object files (when building
 # shared libraries) are created, or when an application is linked.
 # SHARED_LDFLAGS contains flags to be used when the shared library is created.
-LDFLAGS=$(LDFLAG)
-SHARED_LDFLAGS=$(SHARED_LDFLAG)
-
-# SHARED_RCFLAGS are flags used with windres, i.e. when build for Cygwin
-# or Mingw.
-SHARED_RCFLAGS=$(SHARED_RCFLAG)
+LDFLAGS=
+SHARED_LDFLAGS=
 
 NM=nm
 
@@ -35,12 +31,6 @@ LIBNAME=
 #APPNAME=foo
 APPNAME=
 
-# DSTDIR is the directory where the built file should end up in.
-DSTDIR=.
-
-# SRCDIR is the top directory of the source tree.
-SRCDIR=.
-
 # OBJECTS contains all the object files to link together into the application.
 # This must contain at least one object file.
 #OBJECTS=foo.o
@@ -102,11 +92,9 @@ CALC_VERSIONS=	\
 LINK_APP=	\
   ( $(SET_X);   \
     LIBDEPS="$${LIBDEPS:-$(LIBDEPS)}"; \
-    LDCMD="$${LDCMD:-$(CC)}"; LDFLAGS="$${LDFLAGS:-$(CFLAGS) $(LDFLAGS)}"; \
+    LDCMD="$${LDCMD:-$(CC)}"; LDFLAGS="$${LDFLAGS:-$(CFLAGS)}"; \
     LIBPATH=`for x in $$LIBDEPS; do echo $$x; done | sed -e 's/^ *-L//;t' -e d | uniq`; \
     LIBPATH=`echo $$LIBPATH | sed -e 's/ /:/g'`; \
-    echo LD_LIBRARY_PATH=$$LIBPATH:$$LD_LIBRARY_PATH \
-        $${LDCMD} $${LDFLAGS} -o $${APPNAME:=$(APPNAME)} $(OBJECTS) $${LIBDEPS}; \
     LD_LIBRARY_PATH=$$LIBPATH:$$LD_LIBRARY_PATH \
     $${LDCMD} $${LDFLAGS} -o $${APPNAME:=$(APPNAME)} $(OBJECTS) $${LIBDEPS} )
 
@@ -117,13 +105,9 @@ LINK_SO=	\
     SHAREDFLAGS="$${SHAREDFLAGS:-$(CFLAGS) $(SHARED_LDFLAGS)}"; \
     LIBPATH=`for x in $$LIBDEPS; do echo $$x; done | sed -e 's/^ *-L//;t' -e d | uniq`; \
     LIBPATH=`echo $$LIBPATH | sed -e 's/ /:/g'`; \
-    echo LD_LIBRARY_PATH=$$LIBPATH:$$LD_LIBRARY_PATH \
-         $${SHAREDCMD} $${SHAREDFLAGS} \
-	     -o $(DSTDIR)/$$SHLIB$$SHLIB_SOVER$$SHLIB_SUFFIX \
-	     $$ALLSYMSFLAGS $$SHOBJECTS $$NOALLSYMSFLAGS $$LIBDEPS; \
     LD_LIBRARY_PATH=$$LIBPATH:$$LD_LIBRARY_PATH \
     $${SHAREDCMD} $${SHAREDFLAGS} \
-	-o $(DSTDIR)/$$SHLIB$$SHLIB_SOVER$$SHLIB_SUFFIX \
+	-o $$SHLIB$$SHLIB_SOVER$$SHLIB_SUFFIX \
 	$$ALLSYMSFLAGS $$SHOBJECTS $$NOALLSYMSFLAGS $$LIBDEPS \
   ) && $(SYMLINK_SO)
 
@@ -132,30 +116,30 @@ SYMLINK_SO=	\
 		prev=$$SHLIB$$SHLIB_SOVER$$SHLIB_SUFFIX; \
 		if [ -n "$$SHLIB_COMPAT" ]; then \
 			for x in $$SHLIB_COMPAT; do \
-				( $(SET_X); rm -f $(DSTDIR)/$$SHLIB$$x$$SHLIB_SUFFIX; \
-				  ln -s $$prev $(DSTDIR)/$$SHLIB$$x$$SHLIB_SUFFIX ); \
+				( $(SET_X); rm -f $$SHLIB$$x$$SHLIB_SUFFIX; \
+				  ln -s $$prev $$SHLIB$$x$$SHLIB_SUFFIX ); \
 				prev=$$SHLIB$$x$$SHLIB_SUFFIX; \
 			done; \
 		fi; \
 		if [ -n "$$SHLIB_SOVER" ]; then \
-			( $(SET_X); rm -f $(DSTDIR)/$$SHLIB$$SHLIB_SUFFIX; \
-			  ln -s $$prev $(DSTDIR)/$$SHLIB$$SHLIB_SUFFIX ); \
+			( $(SET_X); rm -f $$SHLIB$$SHLIB_SUFFIX; \
+			  ln -s $$prev $$SHLIB$$SHLIB_SUFFIX ); \
 		fi; \
 	fi
 
-LINK_SO_A=	SHOBJECTS="$(DSTDIR)/lib$(LIBNAME).a $(LIBEXTRAS)"; $(LINK_SO)
+LINK_SO_A=	SHOBJECTS="lib$(LIBNAME).a $(LIBEXTRAS)"; $(LINK_SO)
 LINK_SO_O=	SHOBJECTS="$(LIBEXTRAS)"; $(LINK_SO)
 
 LINK_SO_A_VIA_O=	\
-  SHOBJECTS=$(DSTDIR)/lib$(LIBNAME).o; \
+  SHOBJECTS=lib$(LIBNAME).o; \
   ALL=$$ALLSYMSFLAGS; ALLSYMSFLAGS=; NOALLSYMSFLAGS=; \
-  ( echo ld $(LDFLAGS) -r -o $$SHOBJECTS.o $$ALL lib$(LIBNAME).a $(LIBEXTRAS); \
-    ld $(LDFLAGS) -r -o $$SHOBJECTS.o $$ALL $(DSTDIR)/lib$(LIBNAME).a $(LIBEXTRAS) ); \
-  $(LINK_SO) && ( echo rm -f $$SHOBJECTS; rm -f $$SHOBJECTS )
+  ( $(SET_X); \
+    ld $(LDFLAGS) -r -o lib$(LIBNAME).o $$ALL lib$(LIBNAME).a $(LIBEXTRAS) ); \
+  $(LINK_SO) && rm -f lib$(LIBNAME).o
 
 LINK_SO_A_UNPACKED=	\
   UNPACKDIR=link_tmp.$$$$; rm -rf $$UNPACKDIR; mkdir $$UNPACKDIR; \
-  (cd $$UNPACKDIR; ar x ../$(DSTDIR)/lib$(LIBNAME).a) && \
+  (cd $$UNPACKDIR; ar x ../lib$(LIBNAME).a) && \
   ([ -z "$(LIBEXTRAS)" ] || cp $(LIBEXTRAS) $$UNPACKDIR) && \
   SHOBJECTS=$$UNPACKDIR/*.o; \
   $(LINK_SO) && rm -rf $$UNPACKDIR
@@ -169,7 +153,7 @@ DO_GNU_SO=$(CALC_VERSIONS); \
 	NOALLSYMSFLAGS='-Wl,--no-whole-archive'; \
 	SHAREDFLAGS="$(CFLAGS) $(SHARED_LDFLAGS) -shared -Wl,-Bsymbolic -Wl,-soname=$$SHLIB$$SHLIB_SOVER$$SHLIB_SUFFIX"
 
-DO_GNU_APP=LDFLAGS="$(CFLAGS) $(LDFLAGS) -Wl,-rpath,$(LIBRPATH)"
+DO_GNU_APP=LDFLAGS="$(CFLAGS) -Wl,-rpath,$(LIBRPATH)"
 
 #This is rather special.  It's a special target with which one can link
 #applications without bothering with any features that have anything to
@@ -186,16 +170,16 @@ link_a.gnu:
 link_app.gnu:
 	@ $(DO_GNU_APP); $(LINK_APP)
 
-link_a.linux-shared:
-	@if [ $(LIBNAME) != "crypto" -a $(LIBNAME) != "ssl" ]; then $(DO_GNU_SO); else \
-	$(PERL) $(SRCDIR)/util/mkdef.pl $(LIBNAME) linux >$(LIBNAME).map; \
-	$(CALC_VERSIONS); \
-	SHLIB=lib$(LIBNAME).so; \
+DO_BEOS_SO=	SHLIB=lib$(LIBNAME).so; \
 	SHLIB_SUFFIX=; \
-	ALLSYMSFLAGS='-Wl,--whole-archive,--version-script=$(LIBNAME).map'; \
+	ALLSYMSFLAGS='-Wl,--whole-archive'; \
 	NOALLSYMSFLAGS='-Wl,--no-whole-archive'; \
-	SHAREDFLAGS="$(CFLAGS) $(SHARED_LDFLAGS) -shared -Wl,-Bsymbolic -Wl,-soname=$$SHLIB$$SHLIB_SOVER$$SHLIB_SUFFIX"; \
-	fi; $(LINK_SO_A)
+	SHAREDFLAGS="$(CFLAGS) $(SHARED_LDFLAGS) -shared -Wl,-Bsymbolic -Wl,-soname=$$SHLIB$$SHLIB_SUFFIX"
+
+link_o.beos:
+	@ $(DO_BEOS_SO); $(LINK_SO_O)
+link_a.beos:
+	@ $(DO_BEOS_SO); $(LINK_SO_A)
 
 link_o.bsd:
 	@if $(DETECT_GNU_LD); then $(DO_GNU_SO); else \
@@ -219,7 +203,7 @@ link_a.bsd:
 	fi; $(LINK_SO_A)
 link_app.bsd:
 	@if $(DETECT_GNU_LD); then $(DO_GNU_APP); else \
-	LDFLAGS="$(CFLAGS) $(LDFLAGS) -Wl,-rpath,$(LIBPATH)"; \
+	LDFLAGS="$(CFLAGS) -Wl,-rpath,$(LIBPATH)"; \
 	fi; $(LINK_APP)
 
 # For Darwin AKA Mac OS/X (dyld)
@@ -288,7 +272,7 @@ link_o.cygwin:
 	SHLIB_SOVER=${LIBVERSION:+"-$(LIBVERSION)"}; \
 	ALLSYMSFLAGS='-Wl,--whole-archive'; \
 	NOALLSYMSFLAGS='-Wl,--no-whole-archive'; \
-	SHAREDFLAGS="$(CFLAGS) $(SHARED_LDFLAGS) -shared $$base $$deffile -Wl,-Bsymbolic"; \
+	SHAREDFLAGS="$(CFLAGS) $(SHARED_LDFLAGS) -shared $$base $$deffile -Wl,-s,-Bsymbolic"; \
 	$(LINK_SO_O)
 #for mingw target if def-file is in use dll-name should match library-name
 link_a.cygwin:
@@ -304,23 +288,25 @@ link_a.cygwin:
 		esac; \
 		SHLIB_SOVER=32; \
 		extras="$(LIBNAME).def"; \
-		$(PERL) $(SRCDIR)/util/mkdef.pl 32 $$SHLIB > $$extras; \
+		$(PERL) util/mkdef.pl 32 $$SHLIB > $$extras; \
 		base=; [ $(LIBNAME) = "crypto" ] && base=-Wl,--image-base,0x63000000; \
 	fi; \
 	dll_name=$$SHLIB$$SHLIB_SOVER$$SHLIB_SUFFIX; \
-	echo "$(PERL) $(SRCDIR)/util/mkrc.pl $$dll_name |" \
-		     "$(CROSS_COMPILE)windres $(SHARED_RCFLAGS) -o rc.o"; \
-	$(PERL) $(SRCDIR)/util/mkrc.pl $$dll_name | \
-		$(CROSS_COMPILE)windres $(SHARED_RCFLAGS) -o rc.o; \
+	$(PERL) util/mkrc.pl $$dll_name | \
+		$(CROSS_COMPILE)windres -o rc.o; \
 	extras="$$extras rc.o"; \
 	ALLSYMSFLAGS='-Wl,--whole-archive'; \
 	NOALLSYMSFLAGS='-Wl,--no-whole-archive'; \
-	SHAREDFLAGS="$(CFLAGS) $(SHARED_LDFLAGS) -shared $$base -Wl,-Bsymbolic -Wl,--out-implib,lib$(LIBNAME).dll.a $$extras"; \
+	SHAREDFLAGS="$(CFLAGS) $(SHARED_LDFLAGS) -shared $$base -Wl,-s,-Bsymbolic -Wl,--out-implib,lib$(LIBNAME).dll.a $$extras"; \
+	[ -f apps/$$dll_name ] && rm apps/$$dll_name; \
+	[ -f test/$$dll_name ] && rm test/$$dll_name; \
 	$(LINK_SO_A) || exit 1; \
-	rm $$extras
+	rm $$extras; \
+	cp -p $$dll_name apps/; \
+	cp -p $$dll_name test/
 link_app.cygwin:
 	@if expr "$(CFLAGS)" : '.*OPENSSL_USE_APPLINK' > /dev/null; then \
-		LIBDEPS="$(SRCDIR)/crypto/applink.o $${LIBDEPS:-$(LIBDEPS)}"; \
+		LIBDEPS="$(TOP)/crypto/applink.o $${LIBDEPS:-$(LIBDEPS)}"; \
 		export LIBDEPS; \
 	fi; \
 	$(LINK_APP)
@@ -371,7 +357,7 @@ link_app.alpha-osf1:
 	@if $(DETECT_GNU_LD); then \
 		$(DO_GNU_APP); \
 	else \
-		LDFLAGS="$(CFLAGS) $(LDFLAGS) -rpath $(LIBRPATH)"; \
+		LDFLAGS="$(CFLAGS) -rpath $(LIBRPATH)"; \
 	fi; \
 	$(LINK_APP)
 
@@ -398,12 +384,7 @@ link_a.solaris:
 		($(CC) -v 2>&1 | grep gcc) > /dev/null && MINUSZ='-Wl,-z,'; \
 		SHLIB=lib$(LIBNAME).so; \
 		SHLIB_SUFFIX=;\
-		if [ $(LIBNAME) != "crypto" -a $(LIBNAME) != "ssl" ]; then \
-			ALLSYMSFLAGS="$${MINUSZ}allextract"; \
-		else \
-			$(PERL) $(SRCDIR)/util/mkdef.pl $(LIBNAME) linux >$(LIBNAME).map; \
-			ALLSYMSFLAGS="$${MINUSZ}allextract,-M,$(LIBNAME).map"; \
-		fi; \
+		ALLSYMSFLAGS="$${MINUSZ}allextract"; \
 		NOALLSYMSFLAGS="$${MINUSZ}defaultextract"; \
 		SHAREDFLAGS="$(CFLAGS) $(SHARED_LDFLAGS) -h $$SHLIB$$SHLIB_SOVER$$SHLIB_SUFFIX -Wl,-Bsymbolic"; \
 	fi; \
@@ -412,7 +393,7 @@ link_app.solaris:
 	@ if $(DETECT_GNU_LD); then \
 		$(DO_GNU_APP); \
 	else \
-		LDFLAGS="$(CFLAGS) $(LDFLAGS) -R $(LIBRPATH)"; \
+		LDFLAGS="$(CFLAGS) -R $(LIBRPATH)"; \
 	fi; \
 	$(LINK_APP)
 
@@ -507,7 +488,7 @@ link_a.irix:
 	fi; \
 	$(LINK_SO_A)
 link_app.irix:
-	@LDFLAGS="$(CFLAGS) $(LDFLAGS) -Wl,-rpath,$(LIBRPATH)"; \
+	@LDFLAGS="$(CFLAGS) -Wl,-rpath,$(LIBRPATH)"; \
 	$(LINK_APP)
 
 # 32-bit PA-RISC HP-UX embeds the -L pathname of libs we link with, so
@@ -546,7 +527,7 @@ link_a.hpux:
 	$(LINK_SO_A) && chmod a=rx $$SHLIB$$SHLIB_SOVER$$SHLIB_SUFFIX
 link_app.hpux:
 	@if $(DETECT_GNU_LD); then $(DO_GNU_APP); else \
-	LDFLAGS="$(CFLAGS) $(LDFLAGS) -Wl,+s,+cdp,../:,+cdp,./:,+b,$(LIBRPATH)"; \
+	LDFLAGS="$(CFLAGS) -Wl,+s,+cdp,../:,+cdp,./:,+b,$(LIBRPATH)"; \
 	fi; \
 	$(LINK_APP)
 
@@ -571,13 +552,31 @@ link_a.aix:
 	SHAREDFLAGS='$(CFLAGS) $(SHARED_LDFLAGS) -Wl,-bexpall,-bnolibpath,-bM:SRE'; \
 	$(LINK_SO_A_VIA_O)
 link_app.aix:
-	LDFLAGS="$(CFLAGS) $(LDFLAGS) -Wl,-brtl,-blibpath:$(LIBRPATH):$${LIBPATH:-/usr/lib:/lib}"; \
+	LDFLAGS="$(CFLAGS) -Wl,-brtl,-blibpath:$(LIBRPATH):$${LIBPATH:-/usr/lib:/lib}"; \
 	$(LINK_APP)
 
+link_o.reliantunix:
+	@ $(CALC_VERSIONS); \
+	SHLIB=lib$(LIBNAME).so; \
+	SHLIB_SUFFIX=; \
+	ALLSYMSFLAGS=; \
+	NOALLSYMSFLAGS=''; \
+	SHAREDFLAGS='$(CFLAGS) -G'; \
+	$(LINK_SO_O)
+link_a.reliantunix:
+	@ $(CALC_VERSIONS); \
+	SHLIB=lib$(LIBNAME).so; \
+	SHLIB_SUFFIX=; \
+	ALLSYMSFLAGS=; \
+	NOALLSYMSFLAGS=''; \
+	SHAREDFLAGS='$(CFLAGS) -G'; \
+	$(LINK_SO_A_UNPACKED)
+link_app.reliantunix:
+	$(LINK_APP)
 
 # Targets to build symbolic links when needed
 symlink.gnu symlink.solaris symlink.svr3 symlink.svr5 symlink.irix \
-symlink.aix:
+symlink.aix symlink.reliantunix:
 	@ $(CALC_VERSIONS); \
 	SHLIB=lib$(LIBNAME).so; \
 	$(SYMLINK_SO)
@@ -592,11 +591,11 @@ symlink.hpux:
 	expr $(PLATFORM) : '.*ia64' > /dev/null && SHLIB=lib$(LIBNAME).so; \
 	$(SYMLINK_SO)
 # The following lines means those specific architectures do no symlinks
-symlink.cygwin symlink.alpha-osf1 symlink.tru64 symlink.tru64-rpath:
+symlink.cygwin symlink.alpha-osf1 symlink.tru64 symlink.tru64-rpath symlink.beos:
 
 # Compatibility targets
 link_o.bsd-gcc-shared link_o.linux-shared link_o.gnu-shared: link_o.gnu
-link_a.bsd-gcc-shared link_a.gnu-shared: link_a.gnu
+link_a.bsd-gcc-shared link_a.linux-shared link_a.gnu-shared: link_a.gnu
 link_app.bsd-gcc-shared link_app.linux-shared link_app.gnu-shared: link_app.gnu
 symlink.bsd-gcc-shared symlink.bsd-shared symlink.linux-shared symlink.gnu-shared: symlink.gnu
 link_o.bsd-shared: link_o.bsd
@@ -646,3 +645,11 @@ link_o.aix-shared: link_o.aix
 link_a.aix-shared: link_a.aix
 link_app.aix-shared: link_app.aix
 symlink.aix-shared: symlink.aix
+link_o.reliantunix-shared: link_o.reliantunix
+link_a.reliantunix-shared: link_a.reliantunix
+link_app.reliantunix-shared: link_app.reliantunix
+symlink.reliantunix-shared: symlink.reliantunix
+link_o.beos-shared: link_o.beos
+link_a.beos-shared: link_a.beos
+link_app.beos-shared: link_app.gnu
+symlink.beos-shared: symlink.beos

NEWS

@@ -5,99 +5,21 @@
   This file gives a brief overview of the major changes between each OpenSSL
   release. For more details please read the CHANGES file.
 
-  Major changes between OpenSSL 1.0.2f and OpenSSL 1.1.0 [in pre-release]
+  Major changes between OpenSSL 1.0.0q and OpenSSL 1.0.0r [19 Mar 2015]
 
-      o Support for ChaCha20 and Poly1305 added to libcrypto and libssl
-      o Support for extended master secret
-      o CCM ciphersuites
-      o Reworked test suite, now based on perl, Test::Harness and Test::More
-      o Various libcrypto structures made opaque including: BIGNUM, EVP_MD,
-        EVP_MD_CTX, HMAC_CTX, EVP_CIPHER and EVP_CIPHER_CTX.
-      o libssl internal structures made opaque
-      o SSLv2 support removed
-      o Kerberos ciphersuite support removed
-      o RC4 removed from DEFAULT ciphersuites in libssl
-      o 40 and 56 bit cipher support removed from libssl
-      o All public header files moved to include/openssl, no more symlinking
-      o SSL/TLS state machine, version negotiation and record layer rewritten
-      o EC revision: now operations use new EC_KEY_METHOD.
-      o Support for OCB mode added to libcrypto
-      o Support for asynchronous crypto operations added to libcrypto and libssl
-      o Deprecated interfaces can now be disabled at build time either
-        relative to the latest release via the "no-deprecated" Configure
-        argument, or via the "--api=1.1.0|1.0.0|0.9.8" option.
-      o Application software can be compiled with -DOPENSSL_API_COMPAT=version
-        to ensure that features deprecated in that version are not exposed.
-      o Support for RFC6698/RFC7671 DANE TLSA peer authentication
-      o Change of Configure to use --prefix as the main installation
-        directory location rather than --openssldir.  The latter becomes
-        the directory for certs, private key and openssl.cnf exclusively.
-      o Reworked BIO networking library, with full support for IPv6.
-      o New "unified" build system
-
-  Major changes between OpenSSL 1.0.2e and OpenSSL 1.0.2f [28 Jan 2016]
-
-      o DH small subgroups (CVE-2016-0701)
-      o SSLv2 doesn't block disabled ciphers (CVE-2015-3197)
-
-  Major changes between OpenSSL 1.0.2d and OpenSSL 1.0.2e [3 Dec 2015]
-
-      o BN_mod_exp may produce incorrect results on x86_64 (CVE-2015-3193)
-      o Certificate verify crash with missing PSS parameter (CVE-2015-3194)
-      o X509_ATTRIBUTE memory leak (CVE-2015-3195)
-      o Rewrite EVP_DecodeUpdate (base64 decoding) to fix several bugs
-      o In DSA_generate_parameters_ex, if the provided seed is too short,
-        return an error
-
-  Major changes between OpenSSL 1.0.2c and OpenSSL 1.0.2d [9 Jul 2015]
-
-      o Alternate chains certificate forgery (CVE-2015-1793)
-      o Race condition handling PSK identify hint (CVE-2015-3196)
-
-  Major changes between OpenSSL 1.0.2b and OpenSSL 1.0.2c [12 Jun 2015]
-
-      o Fix HMAC ABI incompatibility
-
-  Major changes between OpenSSL 1.0.2a and OpenSSL 1.0.2b [11 Jun 2015]
-
-      o Malformed ECParameters causes infinite loop (CVE-2015-1788)
-      o Exploitable out-of-bounds read in X509_cmp_time (CVE-2015-1789)
-      o PKCS7 crash with missing EnvelopedContent (CVE-2015-1790)
-      o CMS verify infinite loop with unknown hash function (CVE-2015-1792)
-      o Race condition handling NewSessionTicket (CVE-2015-1791)
-
-  Major changes between OpenSSL 1.0.2 and OpenSSL 1.0.2a [19 Mar 2015]
-
-      o OpenSSL 1.0.2 ClientHello sigalgs DoS fix (CVE-2015-0291)
-      o Multiblock corrupted pointer fix (CVE-2015-0290)
-      o Segmentation fault in DTLSv1_listen fix (CVE-2015-0207)
       o Segmentation fault in ASN1_TYPE_cmp fix (CVE-2015-0286)
-      o Segmentation fault for invalid PSS parameters fix (CVE-2015-0208)
       o ASN.1 structure reuse memory corruption fix (CVE-2015-0287)
       o PKCS7 NULL pointer dereferences fix (CVE-2015-0289)
       o DoS via reachable assert in SSLv2 servers fix (CVE-2015-0293)
-      o Empty CKE with client auth and DHE fix (CVE-2015-1787)
-      o Handshake with unseeded PRNG fix (CVE-2015-0285)
       o Use After Free following d2i_ECPrivatekey error fix (CVE-2015-0209)
       o X509_to_X509_REQ NULL pointer deref fix (CVE-2015-0288)
       o Removed the export ciphers from the DEFAULT ciphers
 
-  Major changes between OpenSSL 1.0.1l and OpenSSL 1.0.2 [22 Jan 2015]:
-
-      o Suite B support for TLS 1.2 and DTLS 1.2
-      o Support for DTLS 1.2
-      o TLS automatic EC curve selection.
-      o API to set TLS supported signature algorithms and curves
-      o SSL_CONF configuration API.
-      o TLS Brainpool support.
-      o ALPN support.
-      o CMS support for RSA-PSS, RSA-OAEP, ECDH and X9.42 DH.
-
-  Major changes between OpenSSL 1.0.1k and OpenSSL 1.0.1l [15 Jan 2015]
+  Major changes between OpenSSL 1.0.0p and OpenSSL 1.0.0q [15 Jan 2015]
 
       o Build fixes for the Windows and OpenVMS platforms
 
-  Major changes between OpenSSL 1.0.1j and OpenSSL 1.0.1k [8 Jan 2015]
+  Major changes between OpenSSL 1.0.0o and OpenSSL 1.0.0p [8 Jan 2015]
 
       o Fix for CVE-2014-3571
       o Fix for CVE-2015-0206
@@ -108,88 +30,55 @@
       o Fix for CVE-2014-8275
       o Fix for CVE-2014-3570
 
-  Major changes between OpenSSL 1.0.1i and OpenSSL 1.0.1j [15 Oct 2014]
+  Major changes between OpenSSL 1.0.0n and OpenSSL 1.0.0o [15 Oct 2014]
 
       o Fix for CVE-2014-3513
       o Fix for CVE-2014-3567
       o Mitigation for CVE-2014-3566 (SSL protocol vulnerability)
       o Fix for CVE-2014-3568
 
-  Major changes between OpenSSL 1.0.1h and OpenSSL 1.0.1i [6 Aug 2014]
+  Major changes between OpenSSL 1.0.0m and OpenSSL 1.0.0n [6 Aug 2014]
 
-      o Fix for CVE-2014-3512
-      o Fix for CVE-2014-3511
       o Fix for CVE-2014-3510
       o Fix for CVE-2014-3507
       o Fix for CVE-2014-3506
       o Fix for CVE-2014-3505
       o Fix for CVE-2014-3509
-      o Fix for CVE-2014-5139
       o Fix for CVE-2014-3508
 
-  Major changes between OpenSSL 1.0.1g and OpenSSL 1.0.1h [5 Jun 2014]
+  Known issues in OpenSSL 1.0.0m:
+
+      o EAP-FAST and other applications using tls_session_secret_cb
+        wont resume sessions. Fixed in 1.0.0n-dev
+      o Compilation failure of s3_pkt.c on some platforms due to missing
+        <limits.h> include. Fixed in 1.0.0n-dev
+
+  Major changes between OpenSSL 1.0.0l and OpenSSL 1.0.0m [5 Jun 2014]
 
       o Fix for CVE-2014-0224
       o Fix for CVE-2014-0221
       o Fix for CVE-2014-0198
       o Fix for CVE-2014-0195
       o Fix for CVE-2014-3470
+      o Fix for CVE-2014-0076
       o Fix for CVE-2010-5298
 
-  Major changes between OpenSSL 1.0.1f and OpenSSL 1.0.1g [7 Apr 2014]
+  Major changes between OpenSSL 1.0.0k and OpenSSL 1.0.0l [6 Jan 2014]
 
-      o Fix for CVE-2014-0160
-      o Add TLS padding extension workaround for broken servers.
-      o Fix for CVE-2014-0076
-
-  Major changes between OpenSSL 1.0.1e and OpenSSL 1.0.1f [6 Jan 2014]
-
-      o Don't include gmt_unix_time in TLS server and client random values
-      o Fix for TLS record tampering bug CVE-2013-4353
-      o Fix for TLS version checking bug CVE-2013-6449
       o Fix for DTLS retransmission bug CVE-2013-6450
 
-  Major changes between OpenSSL 1.0.1d and OpenSSL 1.0.1e [11 Feb 2013]:
+  Major changes between OpenSSL 1.0.0j and OpenSSL 1.0.0k [5 Feb 2013]:
 
-      o Corrected fix for CVE-2013-0169
-
-  Major changes between OpenSSL 1.0.1c and OpenSSL 1.0.1d [4 Feb 2013]:
-
-      o Fix renegotiation in TLS 1.1, 1.2 by using the correct TLS version.
-      o Include the fips configuration module.
-      o Fix OCSP bad key DoS attack CVE-2013-0166
       o Fix for SSL/TLS/DTLS CBC plaintext recovery attack CVE-2013-0169
-      o Fix for TLS AESNI record handling flaw CVE-2012-2686
+      o Fix OCSP bad key DoS attack CVE-2013-0166
 
-  Major changes between OpenSSL 1.0.1b and OpenSSL 1.0.1c [10 May 2012]:
+  Major changes between OpenSSL 1.0.0i and OpenSSL 1.0.0j [10 May 2012]:
 
-      o Fix TLS/DTLS record length checking bug CVE-2012-2333
-      o Don't attempt to use non-FIPS composite ciphers in FIPS mode.
+      o Fix DTLS record length checking bug CVE-2012-2333
 
-  Major changes between OpenSSL 1.0.1a and OpenSSL 1.0.1b [26 Apr 2012]:
-
-      o Fix compilation error on non-x86 platforms.
-      o Make FIPS capable OpenSSL ciphers work in non-FIPS mode.
-      o Fix SSL_OP_NO_TLSv1_1 clash with SSL_OP_ALL in OpenSSL 1.0.0
-
-  Major changes between OpenSSL 1.0.1 and OpenSSL 1.0.1a [19 Apr 2012]:
+  Major changes between OpenSSL 1.0.0h and OpenSSL 1.0.0i [19 Apr 2012]:
 
       o Fix for ASN1 overflow bug CVE-2012-2110
-      o Workarounds for some servers that hang on long client hellos.
-      o Fix SEGV in AES code.
-
-  Major changes between OpenSSL 1.0.0h and OpenSSL 1.0.1 [14 Mar 2012]:
-
-      o TLS/DTLS heartbeat support.
-      o SCTP support.
-      o RFC 5705 TLS key material exporter.
-      o RFC 5764 DTLS-SRTP negotiation.
-      o Next Protocol Negotiation.
-      o PSS signatures in certificates, requests and CRLs.
-      o Support for password based recipient info for CMS.
-      o Support TLS v1.2 and TLS v1.1.
-      o Preliminary FIPS capability for unvalidated 2.0 FIPS module.
-      o SRP support.
 
   Major changes between OpenSSL 1.0.0g and OpenSSL 1.0.0h [12 Mar 2012]:
 
@@ -309,7 +198,7 @@
   Major changes between OpenSSL 0.9.8e and OpenSSL 0.9.8f [11 Oct 2007]:
 
       o Add gcc 4.2 support.
-      o Add support for AES and SSE2 assembly language optimization
+      o Add support for AES and SSE2 assembly lanugauge optimization
         for VC++ build.
       o Support for RFC4507bis and server name extensions if explicitly 
         selected at compile time.

Netware/do_tests.pl

@@ -270,6 +270,22 @@ sub ssl_tests
    print( OUT "\n========================================================\n");
    print( OUT "SSL TESTS:\n\n");
 
+   system("ssltest -ssl2 (CLIB_OPT)/>$outFile");
+   log_desc("Testing sslv2:");
+   log_output("ssltest -ssl2", $outFile);
+
+   system("$ssltest -ssl2 -server_auth (CLIB_OPT)/>$outFile");
+   log_desc("Testing sslv2 with server authentication:");
+   log_output("$ssltest -ssl2 -server_auth", $outFile);
+
+   system("$ssltest -ssl2 -client_auth (CLIB_OPT)/>$outFile");
+   log_desc("Testing sslv2 with client authentication:");
+   log_output("$ssltest -ssl2 -client_auth", $outFile);
+
+   system("$ssltest -ssl2 -server_auth -client_auth (CLIB_OPT)/>$outFile");
+   log_desc("Testing sslv2 with both client and server authentication:");
+   log_output("$ssltest -ssl2 -server_auth -client_auth", $outFile);
+
    system("ssltest -ssl3 (CLIB_OPT)/>$outFile");
    log_desc("Testing sslv3:");
    log_output("ssltest -ssl3", $outFile);
@@ -302,10 +318,26 @@ sub ssl_tests
    log_desc("Testing sslv2/sslv3 with both client and server authentication:");
    log_output("$ssltest -server_auth -client_auth", $outFile);
 
+   system("ssltest -bio_pair -ssl2 (CLIB_OPT)/>$outFile");
+   log_desc("Testing sslv2 via BIO pair:");
+   log_output("ssltest -bio_pair -ssl2", $outFile);
+
    system("ssltest -bio_pair -dhe1024dsa -v (CLIB_OPT)/>$outFile");
    log_desc("Testing sslv2/sslv3 with 1024 bit DHE via BIO pair:");
    log_output("ssltest -bio_pair -dhe1024dsa -v", $outFile);
 
+   system("$ssltest -bio_pair -ssl2 -server_auth (CLIB_OPT)/>$outFile");
+   log_desc("Testing sslv2 with server authentication via BIO pair:");
+   log_output("$ssltest -bio_pair -ssl2 -server_auth", $outFile);
+
+   system("$ssltest -bio_pair -ssl2 -client_auth (CLIB_OPT)/>$outFile");
+   log_desc("Testing sslv2 with client authentication via BIO pair:");
+   log_output("$ssltest -bio_pair -ssl2 -client_auth", $outFile);
+
+   system("$ssltest -bio_pair -ssl2 -server_auth -client_auth (CLIB_OPT)/>$outFile");
+   log_desc("Testing sslv2 with both client and server authentication via BIO pair:");
+   log_output("$ssltest -bio_pair -ssl2 -server_auth -client_auth", $outFile);
+
    system("ssltest -bio_pair -ssl3 (CLIB_OPT)/>$outFile");
    log_desc("Testing sslv3 via BIO pair:");
    log_output("ssltest -bio_pair -ssl3", $outFile);

Netware/globals.txt

@@ -66,7 +66,7 @@ static LHASH *error_hash=NULL;
 static LHASH *thread_hash=NULL;
 
 several files have routines with static "init" to track if error strings
-   have been loaded ( may not want separate error strings for each process )
+   have been loaded ( may not want seperate error strings for each process )
    The "init" variable can't be left "global" because the error has is a ptr
    that is malloc'ed.  The malloc'ed error has is dependant on the "init"
    vars.

Netware/set_env.bat

@@ -1,7 +1,7 @@
 @echo off
 
 rem ========================================================================
-rem   Batch file to assist in setting up the necessary environment for
+rem   Batch file to assist in setting up the necessary enviroment for
 rem   building OpenSSL for NetWare.
 rem
 rem   usage:
@@ -84,10 +84,10 @@ echo using GNU GCC Compiler
 :info
 echo.
 
-if "%LIBC_BUILD%" == "Y" echo Environment configured for LibC build
+if "%LIBC_BUILD%" == "Y" echo Enviroment configured for LibC build
 if "%LIBC_BUILD%" == "Y" echo use "netware\build.bat netware-libc ..." 
 
-if "%CLIB_BUILD%" == "Y" echo Environment configured for CLib build
+if "%CLIB_BUILD%" == "Y" echo Enviroment configured for CLib build
 if "%CLIB_BUILD%" == "Y" echo use "netware\build.bat netware-clib ..." 
 
 goto end

PROBLEMS

@@ -47,7 +47,7 @@ While running tests, running a parallell make is a bad idea.  Many test
 scripts use the same name for output and input files, which means different
 will interfere with each other and lead to test failure.
 
-The solution is simple for now: don't run parallel make when testing.
+The solution is simple for now: don't run parallell make when testing.
 
 
 * Bugs in gcc triggered

README

@@ -1,7 +1,7 @@
 
- OpenSSL 1.1.0-pre3 (alpha) 15 Feb 2016
+ OpenSSL 1.0.0r 19 Mar 2015
 
- Copyright (c) 1998-2016 The OpenSSL Project
+ Copyright (c) 1998-2011 The OpenSSL Project
  Copyright (c) 1995-1998 Eric A. Young, Tim J. Hudson
  All rights reserved.
 
@@ -10,17 +10,17 @@
 
  The OpenSSL Project is a collaborative effort to develop a robust,
  commercial-grade, fully featured, and Open Source toolkit implementing the
- Secure Sockets Layer (SSLv3) and Transport Layer Security (TLS) protocols as
- well as a full-strength general purpose cryptographic library. The project is
- managed by a worldwide community of volunteers that use the Internet to
- communicate, plan, and develop the OpenSSL toolkit and its related
- documentation.
+ Secure Sockets Layer (SSL v2/v3) and Transport Layer Security (TLS v1)
+ protocols as well as a full-strength general purpose cryptography library.
+ The project is managed by a worldwide community of volunteers that use the
+ Internet to communicate, plan, and develop the OpenSSL toolkit and its
+ related documentation.
 
- OpenSSL is descended from the SSLeay library developed by Eric A. Young
+ OpenSSL is based on the excellent SSLeay library developed from Eric A. Young
  and Tim J. Hudson.  The OpenSSL toolkit is licensed under a dual-license (the
- OpenSSL license plus the SSLeay license), which means that you are free to
- get and use it for commercial and non-commercial purposes as long as you
- fulfill the conditions of both licenses.
+ OpenSSL license plus the SSLeay license) situation, which basically means
+ that you are free to get and use it for commercial and non-commercial
+ purposes as long as you fulfill the conditions of both licenses.
 
  OVERVIEW
  --------
@@ -28,38 +28,116 @@
  The OpenSSL toolkit includes:
 
  libssl.a:
-     Provides the client and server-side implementations for SSLv3 and TLS.
+     Implementation of SSLv2, SSLv3, TLSv1 and the required code to support
+     both SSLv2, SSLv3 and TLSv1 in the one server and client.
 
  libcrypto.a:
-     Provides general cryptographic and X.509 support needed by SSL/TLS but
-     not logically part of it.
+     General encryption and X.509 v1/v3 stuff needed by SSL/TLS but not
+     actually logically part of it. It includes routines for the following:
+
+     Ciphers
+        libdes - EAY's libdes DES encryption package which was floating
+                 around the net for a few years, and was then relicensed by
+                 him as part of SSLeay.  It includes 15 'modes/variations'
+                 of DES (1, 2 and 3 key versions of ecb, cbc, cfb and ofb;
+                 pcbc and a more general form of cfb and ofb) including desx
+                 in cbc mode, a fast crypt(3), and routines to read
+                 passwords from the keyboard.
+        RC4 encryption,
+        RC2 encryption      - 4 different modes, ecb, cbc, cfb and ofb.
+        Blowfish encryption - 4 different modes, ecb, cbc, cfb and ofb.
+        IDEA encryption     - 4 different modes, ecb, cbc, cfb and ofb.
+
+     Digests
+        MD5 and MD2 message digest algorithms, fast implementations,
+        SHA (SHA-0) and SHA-1 message digest algorithms,
+        MDC2 message digest. A DES based hash that is popular on smart cards.
+
+     Public Key
+        RSA encryption/decryption/generation.
+            There is no limit on the number of bits.
+        DSA encryption/decryption/generation.
+            There is no limit on the number of bits.
+        Diffie-Hellman key-exchange/key generation.
+            There is no limit on the number of bits.
+
+     X.509v3 certificates
+        X509 encoding/decoding into/from binary ASN1 and a PEM
+             based ASCII-binary encoding which supports encryption with a
+             private key.  Program to generate RSA and DSA certificate
+             requests and to generate RSA and DSA certificates.
+
+     Systems
+        The normal digital envelope routines and base64 encoding.  Higher
+        level access to ciphers and digests by name.  New ciphers can be
+        loaded at run time.  The BIO io system which is a simple non-blocking
+        IO abstraction.  Current methods supported are file descriptors,
+        sockets, socket accept, socket connect, memory buffer, buffering, SSL
+        client/server, file pointer, encryption, digest, non-blocking testing
+        and null.
+
+     Data structures
+        A dynamically growing hashing system
+        A simple stack.
+        A Configuration loader that uses a format similar to MS .ini files.
 
  openssl:
      A command line tool that can be used for:
-        Creation of key parameters
+        Creation of RSA, DH and DSA key parameters
         Creation of X.509 certificates, CSRs and CRLs
-        Calculation of message digests
-        Encryption and decryption
-        SSL/TLS client and server tests
+        Calculation of Message Digests
+        Encryption and Decryption with Ciphers
+        SSL/TLS Client and Server Tests
         Handling of S/MIME signed or encrypted mail
-        And more...
+
+
+ PATENTS
+ -------
+
+ Various companies hold various patents for various algorithms in various
+ locations around the world. _YOU_ are responsible for ensuring that your use
+ of any algorithms is legal by checking if there are any patents in your
+ country.  The file contains some of the patents that we know about or are
+ rumored to exist. This is not a definitive list.
+
+ RSA Security holds software patents on the RC5 algorithm.  If you
+ intend to use this cipher, you must contact RSA Security for
+ licensing conditions. Their web page is http://www.rsasecurity.com/.
+
+ RC4 is a trademark of RSA Security, so use of this label should perhaps
+ only be used with RSA Security's permission.
+
+ The IDEA algorithm is patented by Ascom in Austria, France, Germany, Italy,
+ Japan, the Netherlands, Spain, Sweden, Switzerland, UK and the USA.  They
+ should be contacted if that algorithm is to be used; their web page is
+ http://www.ascom.ch/.
+
+ NTT and Mitsubishi have patents and pending patents on the Camellia
+ algorithm, but allow use at no charge without requiring an explicit
+ licensing agreement: http://info.isl.ntt.co.jp/crypt/eng/info/chiteki.html
 
  INSTALLATION
  ------------
 
- See the appropriate file:
-        INSTALL         Linux, Unix, etc.
-        INSTALL.DJGPP   DOS platform with DJGPP
-        INSTALL.NW      Netware
-        INSTALL.OS2     OS/2
-        INSTALL.VMS     VMS
-        INSTALL.WIN     Windows
-        INSTALL.WCE     Windows CE
+ To install this package under a Unix derivative, read the INSTALL file.  For
+ a Win32 platform, read the INSTALL.W32 file.  For OpenVMS systems, read
+ INSTALL.VMS.
+
+ Read the documentation in the doc/ directory.  It is quite rough, but it
+ lists the functions; you will probably have to look at the code to work out
+ how to use them. Look at the example programs.
+
+ PROBLEMS
+ --------
+
+ For some platforms, there are some known problems that may affect the user
+ or application author.  We try to collect those in doc/PROBLEMS, with current
+ thoughts on how they should be solved in a future of OpenSSL.
 
  SUPPORT
  -------
 
- See the OpenSSL website www.openssl.org for details on how to obtain
+ See the OpenSSL website www.openssl.org for details of how to obtain
  commercial technical support.
 
  If you have any problems with OpenSSL then please take the following steps
@@ -83,36 +161,58 @@
     - Problem Description (steps that will reproduce the problem, if known)
     - Stack Traceback (if the application dumps core)
 
- Email the report to:
+ Report the bug to the OpenSSL project via the Request Tracker
+ (http://www.openssl.org/support/rt.html) by mail to:
 
-    rt@openssl.org
+    openssl-bugs@openssl.org
 
- In order to avoid spam, this is a moderated mailing list, and it might
- take a day for the ticket to show up.  (We also scan posts to make sure
- that security disclosures aren't publically posted by mistake.) Mail
- to this address is recorded in the public RT (request tracker) database
- (see https://www.openssl.org/community/index.html#bugs for details) and
- also forwarded the public openssl-dev mailing list.  Confidential mail
- may be sent to openssl-security@openssl.org (PGP key available from the
- key servers).
+ Note that the request tracker should NOT be used for general assistance
+ or support queries. Just because something doesn't work the way you expect
+ does not mean it is necessarily a bug in OpenSSL.
 
- Please do NOT use this for general assistance or support queries.
- Just because something doesn't work the way you expect does not mean it
- is necessarily a bug in OpenSSL.
-
- You can also make GitHub pull requests. If you do this, please also send
- mail to rt@openssl.org with a link to the PR so that we can more easily
- keep track of it.
+ Note that mail to openssl-bugs@openssl.org is recorded in the publicly
+ readable request tracker database and is forwarded to a public
+ mailing list. Confidential mail may be sent to openssl-security@openssl.org
+ (PGP key available from the key servers).
 
  HOW TO CONTRIBUTE TO OpenSSL
  ----------------------------
 
- See CONTRIBUTING
+ Development is coordinated on the openssl-dev mailing list (see
+ http://www.openssl.org for information on subscribing). If you
+ would like to submit a patch, send it to openssl-bugs@openssl.org with
+ the string "[PATCH]" in the subject. Please be sure to include a
+ textual explanation of what your patch does.
 
- LEGALITIES
- ----------
+ If you are unsure as to whether a feature will be useful for the general
+ OpenSSL community please discuss it on the openssl-dev mailing list first.
+ Someone may be already working on the same thing or there may be a good
+ reason as to why that feature isn't implemented.
+
+ Patches should be as up to date as possible, preferably relative to the
+ current Git or the last snapshot. They should follow the coding style of
+ OpenSSL and compile without warnings. Some of the core team developer targets
+ can be used for testing purposes, (debug-steve64, debug-geoff etc). OpenSSL
+ compiles on many varied platforms: try to ensure you only use portable
+ features.
+
+ Note: For legal reasons, contributions from the US can be accepted only
+ if a TSU notification and a copy of the patch are sent to crypt@bis.doc.gov
+ (formerly BXA) with a copy to the ENC Encryption Request Coordinator;
+ please take some time to look at
+    http://www.bis.doc.gov/Encryption/PubAvailEncSourceCodeNofify.html [sic]
+ and
+    http://w3.access.gpo.gov/bis/ear/pdf/740.pdf (EAR Section 740.13(e))
+ for the details. If "your encryption source code is too large to serve as
+ an email attachment", they are glad to receive it by fax instead; hope you
+ have a cheap long-distance plan.
+
+ Our preferred format for changes is "diff -u" output. You might
+ generate it like this:
+
+ # cd openssl-work
+ # [your changes]
+ # ./Configure dist; make clean
+ # cd ..
+ # diff -ur openssl-orig openssl-work > mydiffs.patch
 
- A number of nations, in particular the U.S., restrict the use or export
- of cryptography. If you are potentially subject to such restrictions
- you should seek competent professional legal advice before attempting to
- develop or distribute cryptographic code.

README.ASN1

@@ -0,0 +1,187 @@
+
+OpenSSL ASN1 Revision
+=====================
+
+This document describes some of the issues relating to the new ASN1 code.
+
+Previous OpenSSL ASN1 problems
+=============================
+
+OK why did the OpenSSL ASN1 code need revising in the first place? Well
+there are lots of reasons some of which are included below...
+
+1. The code is difficult to read and write. For every single ASN1 structure
+(e.g. SEQUENCE) four functions need to be written for new, free, encode and
+decode operations. This is a very painful and error prone operation. Very few
+people have ever written any OpenSSL ASN1 and those that have usually wish
+they hadn't.
+
+2. Partly because of 1. the code is bloated and takes up a disproportionate
+amount of space. The SEQUENCE encoder is particularly bad: it essentially
+contains two copies of the same operation, one to compute the SEQUENCE length
+and the other to encode it.
+
+3. The code is memory based: that is it expects to be able to read the whole
+structure from memory. This is fine for small structures but if you have a
+(say) 1Gb PKCS#7 signedData structure it isn't such a good idea...
+
+4. The code for the ASN1 IMPLICIT tag is evil. It is handled by temporarily
+changing the tag to the expected one, attempting to read it, then changing it
+back again. This means that decode buffers have to be writable even though they
+are ultimately unchanged. This gets in the way of constification.
+
+5. The handling of EXPLICIT isn't much better. It adds a chunk of code into 
+the decoder and encoder for every EXPLICIT tag.
+
+6. APPLICATION and PRIVATE tags aren't even supported at all.
+
+7. Even IMPLICIT isn't complete: there is no support for implicitly tagged
+types that are not OPTIONAL.
+
+8. Much of the code assumes that a tag will fit in a single octet. This is
+only true if the tag is 30 or less (mercifully tags over 30 are rare).
+
+9. The ASN1 CHOICE type has to be largely handled manually, there aren't any
+macros that properly support it.
+
+10. Encoders have no concept of OPTIONAL and have no error checking. If the
+passed structure contains a NULL in a mandatory field it will not be encoded,
+resulting in an invalid structure.
+
+11. It is tricky to add ASN1 encoders and decoders to external applications.
+
+Template model
+==============
+
+One of the major problems with revision is the sheer volume of the ASN1 code.
+Attempts to change (for example) the IMPLICIT behaviour would result in a
+modification of *every* single decode function. 
+
+I decided to adopt a template based approach. I'm using the term 'template'
+in a manner similar to SNACC templates: it has nothing to do with C++
+templates.
+
+A template is a description of an ASN1 module as several constant C structures.
+It describes in a machine readable way exactly how the ASN1 structure should
+behave. If this template contains enough detail then it is possible to write
+versions of new, free, encode, decode (and possibly others operations) that
+operate on templates.
+
+Instead of having to write code to handle each operation only a single
+template needs to be written. If new operations are needed (such as a 'print'
+operation) only a single new template based function needs to be written 
+which will then automatically handle all existing templates.
+
+Plans for revision
+==================
+
+The revision will consist of the following steps. Other than the first two
+these can be handled in any order.
+ 
+o Design and write template new, free, encode and decode operations, initially
+memory based. *DONE*
+
+o Convert existing ASN1 code to template form. *IN PROGRESS*
+
+o Convert an existing ASN1 compiler (probably SNACC) to output templates
+in OpenSSL form.
+
+o Add support for BIO based ASN1 encoders and decoders to handle large
+structures, initially blocking I/O.
+
+o Add support for non blocking I/O: this is quite a bit harder than blocking
+I/O.
+
+o Add new ASN1 structures, such as OCSP, CRMF, S/MIME v3 (CMS), attribute
+certificates etc etc.
+
+Description of major changes
+============================
+
+The BOOLEAN type now takes three values. 0xff is TRUE, 0 is FALSE and -1 is
+absent. The meaning of absent depends on the context. If for example the
+boolean type is DEFAULT FALSE (as in the case of the critical flag for
+certificate extensions) then -1 is FALSE, if DEFAULT TRUE then -1 is TRUE.
+Usually the value will only ever be read via an API which will hide this from
+an application.
+
+There is an evil bug in the old ASN1 code that mishandles OPTIONAL with
+SEQUENCE OF or SET OF. These are both implemented as a STACK structure. The
+old code would omit the structure if the STACK was NULL (which is fine) or if
+it had zero elements (which is NOT OK). This causes problems because an empty
+SEQUENCE OF or SET OF will result in an empty STACK when it is decoded but when
+it is encoded it will be omitted resulting in different encodings. The new code
+only omits the encoding if the STACK is NULL, if it contains zero elements it
+is encoded and empty. There is an additional problem though: because an empty
+STACK was omitted, sometimes the corresponding *_new() function would
+initialize the STACK to empty so an application could immediately use it, if
+this is done with the new code (i.e. a NULL) it wont work. Therefore a new
+STACK should be allocated first. One instance of this is the X509_CRL list of
+revoked certificates: a helper function X509_CRL_add0_revoked() has been added
+for this purpose.
+
+The X509_ATTRIBUTE structure used to have an element called 'set' which took
+the value 1 if the attribute value was a SET OF or 0 if it was a single. Due
+to the behaviour of CHOICE in the new code this has been changed to a field
+called 'single' which is 0 for a SET OF and 1 for single. The old field has
+been deleted to deliberately break source compatibility. Since this structure
+is normally accessed via higher level functions this shouldn't break too much.
+
+The X509_REQ_INFO certificate request info structure no longer has a field
+called 'req_kludge'. This used to be set to 1 if the attributes field was
+(incorrectly) omitted. You can check to see if the field is omitted now by
+checking if the attributes field is NULL. Similarly if you need to omit
+the field then free attributes and set it to NULL.
+
+The top level 'detached' field in the PKCS7 structure is no longer set when
+a PKCS#7 structure is read in. PKCS7_is_detached() should be called instead.
+The behaviour of PKCS7_get_detached() is unaffected.
+
+The values of 'type' in the GENERAL_NAME structure have changed. This is
+because the old code use the ASN1 initial octet as the selector. The new
+code uses the index in the ASN1_CHOICE template.
+
+The DIST_POINT_NAME structure has changed to be a true CHOICE type.
+
+typedef struct DIST_POINT_NAME_st {
+int type;
+union {
+	STACK_OF(GENERAL_NAME) *fullname;
+	STACK_OF(X509_NAME_ENTRY) *relativename;
+} name;
+} DIST_POINT_NAME;
+
+This means that name.fullname or name.relativename should be set
+and type reflects the option. That is if name.fullname is set then
+type is 0 and if name.relativename is set type is 1.
+
+With the old code using the i2d functions would typically involve:
+
+unsigned char *buf, *p;
+int len;
+/* Find length of encoding */
+len = i2d_SOMETHING(x, NULL);
+/* Allocate buffer */
+buf = OPENSSL_malloc(len);
+if(buf == NULL) {
+	/* Malloc error */
+}
+/* Use temp variable because &p gets updated to point to end of
+ * encoding.
+ */
+p = buf;
+i2d_SOMETHING(x, &p);
+
+
+Using the new i2d you can also do:
+
+unsigned char *buf = NULL;
+int len;
+len = i2d_SOMETHING(x, &buf);
+if(len < 0) {
+	/* Malloc error */
+}
+
+and it will automatically allocate and populate a buffer with the
+encoding. After this call 'buf' will point to the start of the
+encoding which is len bytes long.

README.ECC

@@ -1,61 +0,0 @@
-NOTE: The OpenSSL Software Foundation has executed a sublicense agreement
-entitled "Elliptic Curve Cryptography Patent License Agreement" with the
-National Security Agency/ Central Security Service Commercial Solutions
-Center (NCSC) dated 2010-11-04. That agreement permits implementation and
-distribution of software containing features covered by any or all of the
-following patents:
-
-1.) U.S. Pat. No. 5,761,305 entitled "Key Agreement and Transport Protocol 
-    with Implicit Signatures" issued on June 2, 1998;
-2.) Can. Pat. Appl. Ser. No. 2176972 entitled "Key Agreement and Transport 
-    Protocol with Implicit Signature and Reduced Bandwidth" filed on May 
-    16, 1996;
-3.) U.S. Pat. No. 5,889,865 entitled "Key Agreement and Transport Protocol 
-    with Implicit Signatures" issued on March 30, 1999;
-4.) U.S. Pat. No. 5,896,455 entitled "Key Agreement and Transport Protocol 
-    with Implicit Signatures" issued on April 20, 1999;
-5.) U.S. Pat. No. 5,933,504 entitled "Strengthened Public Key Protocol" 
-    issued on August 3, 1999;
-6.) Can. Pat. Appl. Ser. No. 2176866 entitled "Strengthened Public Key 
-    Protocol" filed on May 17, 1996;
-7.) E.P. Pat. Appl. Ser. No. 96201322.3 entitled "Strengthened Public Key 
-    Protocol" filed on May 17, 1996;
-8.) U.S. Pat. No. 5,999,626 entitled "Digital Signatures on a Smartcard" 
-    issued on December 7, 1999;
-9.) Can. Pat. Appl. Ser. No. 2202566 entitled "Digital Signatures on a 
-    Smartcard" filed on April 14, 1997;
-10.) E.P. Pat. Appl. No. 97106114.8 entitled "Digital Signatures on a 
-     Smartcard" filed on April 15, 1997;
-11.) U.S Pat. No. 6,122,736 entitled "Key Agreement and Transport Protocol 
-     with Implicit Signatures" issued on September 19, 2000;
-12.) Can. Pat. Appl. Ser. No. 2174261 entitled "Key Agreement and Transport 
-     Protocol with Implicit Signatures" filed on April 16, 1996;
-13.) E.P. Pat. Appl. Ser. No. 96105920.1 entitled "Key Agreement and 
-     Transport Protocol with Implicit Signatures" filed on April 16, 1996;
-14.) U.S. Pat. No. 6,141,420 entitled "Elliptic Curve Encryption Systems" 
-     issued on October 31, 2000;
-15.) Can. Pat. Appl. Ser. No. 2155038 entitled "Elliptic Curve Encryption 
-     Systems" filed on July 31, 1995;
-16.) E.P. Pat. Appl. Ser. No. 95926348.4 entitled "Elliptic Curve Encryption 
-     Systems" filed on July 31, 1995;
-17.) U.S. Pat. No. 6,336,188 entitled "Authenticated Key Agreement" issued 
-     on January 1, 2002;
-18.) U.S. Pat. No. 6,487,661 entitled "Key Agreement and Transport Protocol" 
-     issued on November 26, 2002;
-19.) Can. Pat. Appl. Ser. No. 2174260 entitled "Key Agreement and Transport 
-     Protocol" filed on April 16, 1996;
-20.) E.P. Pat. Appl. Ser. No. 96105921.9 entitled "Key Agreement and 
-     Transport Protocol" filed on April 21, 1996;
-21.) U.S. Pat. No. 6,563,928 entitled "Strengthened Public Key Protocol" 
-     issued on May 13, 2003;
-22.) U.S. Pat. No. 6,618,483 entitled "Elliptic Curve Encryption Systems" 
-     issued September 9, 2003;
-23.) U.S. Pat. Appl. Ser. No. 09/434,247 entitled "Digital Signatures on a 
-     Smartcard" filed on November 5, 1999;
-24.) U.S. Pat. Appl. Ser. No. 09/558,256 entitled "Key Agreement and 
-     Transport Protocol with Implicit Signatures" filed on April 25, 2000;
-25.) U.S. Pat. Appl. Ser. No. 09/942,492 entitled "Digital Signatures on a 
-     Smartcard" filed on August 29, 2001 and published on July 18, 2002; and,
-26.) U.S. Pat. Appl. Ser. No. 10/185,735 entitled "Strengthened Public Key 
-     Protocol" filed on July 1, 2000.
-

README.FIPS

@@ -1 +0,0 @@
-This release does not support a FIPS 140-2 validated module.

README.PERL

@@ -1,118 +0,0 @@
- TOC
- ===
-
- - Notes on Perl
- - Notes on Perl on Windows
- - Notes on Perl modules we use
- - Notes on installing a perl module
-
- Notes on Perl
- -------------
-
- For our scripts, we rely quite a bit on Perl, and increasingly on
- some core Perl modules.  These Perl modules are part of the Perl
- source, so if you build Perl on your own, you should be set.
-
- However, if you install Perl as binary packages, the outcome might
- differ, and you may have to check that you do get the core modules
- installed properly.  We do not claim to know them all, but experience
- has told us the following:
-
- - on Linux distributions based on Debian, the package 'perl' will
-   install the core Perl modules as well, so you will be fine.
- - on Linux distributions based on RPMs, you will need to install
-   'perl-core' rather than just 'perl'.
-
- You MUST have at least Perl version 5.10.0 installed.  This minimum
- requirement is due to our use of regexp backslash sequence \R among
- other features that didn't exist in core Perl before that version.
-
- Notes on Perl on Windows
- ------------------------
-
- If you will build on Cygwin (and possibly some other POSIX layers),
- Perl is already part of your distribution.  Simply use the Cygwin
- package manager to make sure Perl gets installed.
-
- Otherwise, you will need to install Perl separately.  The Perl
- package that we know of is ActiveState Perl, available from
- http://www.activestate.com/ActivePerl.
-
- Notes on Perl on VMS
- --------------------
-
- You will need to install Perl separately.  One way to do so is to
- download the source from http://perl.org/, unpacking it, reading
- README.vms and follow instructions.  Another way is to download a
- .PCSI file from http://www.vmsperl.com/ and install it using the
- POLYCENTER install tool.
-
- Notes on Perl modules we use
- ----------------------------
-
- We make increasing use of Perl modules, and do our best to limit
- ourselves to core Perl modules to keep the requirements down.  There
- are just a few exceptions:
-
- Test::More         We require the minimum version to be 0.96, which
-                    appeared in Perl 5.13.4, because that version was
-                    the first to have all the features we're using.
-                    This module is required for testing only!  If you
-                    don't plan on running the tests, you don't need to
-                    bother with this one.
-
- Text::Template     This module is not part of the core Perl modules.
-                    As a matter of fact, the core Perl modules do not
-                    include any templating module to date.
-                    This module is absolutely needed, configuration
-                    depends on it.
-
- To avoid unnecessary initial hurdles, we have bundled a copy of the
- following modules in our source.  They will work as fallbacks if
- these modules aren't already installed on the system.
-
-    Text::Template
-
- Notes on installing a perl module
- ---------------------------------
-
- There are a number of ways to install a perl module.  In all
- descriptions below, Text::Template will server as an example.
-
- 1. for Linux users, the easiest is to install with the use of your
-    favorite package manager.  Usually, all you need to do is search
-    for the module name and to install the package that comes up.
-
-    On Debian based Linux distributions, it would go like this:
-
-        $ apt-cache search Text::Template
-        ...
-        libtext-template-perl - perl module to process text templates
-        $ sudo apt-get install libtext-template-perl
-
-    Perl modules in Debian based distributions use package names like
-    the name of the module in question, with "lib" prepended and
-    "-perl" appended.
-
- 2. Install using CPAN.  This is very easy, but usually requires root
-    access:
-
-        $ cpan -i Text::Template
-
-    Note that this runs all the tests that the module to be install
-    comes with.  This is usually a smooth operation, but there are
-    platforms where a failure is indicate even though the actual tests
-    were successful.  Should that happen, you can force an
-    installation regardless (that should be safe since you've already
-    seen the tests succeed!):
-
-        $ cpan -f -i Text::Template
-
-    Note: on VMS, you must quote any argument that contains upper case
-    characters, so the lines above would be:
-
-        $ cpan -i "Text::Template"
-
-    and:
-
-        $ cpan -f -i "Text::Template"

VMS/TODO

@@ -0,0 +1,18 @@
+TODO:
+=====
+
+There are a few things that need to be worked out in the VMS version of
+OpenSSL, still:
+
+- Description files. ("Makefile's" :-))
+- Script code to link an already compiled build tree.
+- A VMSINSTALlable version (way in the future, unless someone else hacks).
+- shareable images (DLL for you Windows folks).
+
+There may be other things that I have missed and that may be desirable.
+Please send mail to <openssl-users@openssl.org> or to me directly if you
+have any ideas.
+
+--
+Richard Levitte <richard@levitte.org>
+1999-05-24

VMS/VMSify-conf.pl

@@ -7,7 +7,7 @@ my @directory_vars = ( "dir", "certs", "crl_dir", "new_certs_dir" );
 my @file_vars = ( "database", "certificate", "serial", "crlnumber",
 		  "crl", "private_key", "RANDFILE" );
 while(<STDIN>) {
-    s|\R$||;
+    chomp;
     foreach my $d (@directory_vars) {
 	if (/^(\s*\#?\s*${d}\s*=\s*)\.\/([^\s\#]*)([\s\#].*)$/) {
 	    $_ = "$1sys\\\$disk:\[.$2$3";

VMS/WISHLIST.TXT

@@ -0,0 +1,4 @@
+* Have the building procedure contain a LINK-only possibility.
+  Wished by Mark Daniel <mark.daniel@dsto.defence.gov.au>
+
+  One way to enable that is also to go over to DESCRIP.MMS files.

VMS/install-vms.com

@@ -0,0 +1,67 @@
+$! install-vms.com -- Installs the files in a given directory tree
+$!
+$! Author: Richard Levitte <richard@levitte.org>
+$! Time of creation: 23-MAY-1998 19:22
+$!
+$! P1	root of the directory tree
+$!
+$!
+$! Announce/identify.
+$!
+$ proc = f$environment( "procedure")
+$ write sys$output "@@@ "+ -
+   f$parse( proc, , , "name")+ f$parse( proc, , , "type")
+$!
+$ on error then goto tidy
+$ on control_c then goto tidy
+$!
+$ if p1 .eqs. ""
+$ then
+$   write sys$output "First argument missing."
+$   write sys$output -
+     "Should be the directory where you want things installed."
+$   exit
+$ endif
+$
+$ if (f$getsyi( "cpu") .lt. 128)
+$ then
+$   arch = "VAX"
+$ else
+$   arch = f$edit( f$getsyi( "arch_name"), "upcase")
+$   if (arch .eqs. "") then arch = "UNK"
+$ endif
+$
+$ root = f$parse( P1, "[]A.;0", , , "SYNTAX_ONLY, NO_CONCEAL")- "A.;0"
+$ root_dev = f$parse( root, , , "device", "syntax_only")
+$ root_dir = f$parse( root, , , "directory", "syntax_only") - -
+   "[000000." - "][" - "[" - "]"
+$ root = root_dev + "[" + root_dir
+$
+$ define /nolog wrk_sslroot 'root'.] /translation_attributes = concealed
+$ define /nolog wrk_sslinclude wrk_sslroot:[include]
+$
+$ if f$parse( "wrk_sslroot:[000000]") .eqs. "" then -
+   create /directory /log wrk_sslroot:[000000]
+$ if f$parse( "wrk_sslinclude:") .eqs. "" then -
+   create /directory /log wrk_sslinclude:
+$ if f$parse( "wrk_sslroot:[vms]") .eqs. "" then -
+   create /directory /log wrk_sslroot:[vms]
+$!
+$ copy /log /protection = world:re openssl_startup.com wrk_sslroot:[vms]
+$ copy /log /protection = world:re openssl_undo.com wrk_sslroot:[vms]
+$ copy /log /protection = world:re openssl_utils.com wrk_sslroot:[vms]
+$!
+$ tidy:
+$!
+$ call deass wrk_sslroot
+$ call deass wrk_sslinclude
+$!
+$ exit
+$!
+$ deass: subroutine
+$ if (f$trnlnm( p1, "LNM$PROCESS") .nes. "")
+$ then
+$   deassign /process 'p1'
+$ endif
+$ endsubroutine
+$!

VMS/mkshared.com

@@ -0,0 +1,476 @@
+$! MKSHARED.COM -- Create shareable images.
+$!
+$! P1: "64" for 64-bit pointers.
+$!
+$! P2: Zlib object library path (optional).
+$!
+$! Input:	[.UTIL]LIBEAY.NUM,[.xxx.EXE.CRYPTO]SSL_LIBCRYPTO[32].OLB
+$!		[.UTIL]SSLEAY.NUM,[.xxx.EXE.SSL]SSL_LIBSSL[32].OLB
+$!		[.CRYPTO.xxx]OPENSSLCONF.H
+$! Output:	[.xxx.EXE.CRYPTO]SSL_LIBCRYPTO_SHR[32].OPT,.MAP,.EXE
+$!		[.xxx.EXE.SSL]SSL_LIBSSL_SRH[32].OPT,.MAP,.EXE
+$!
+$! So far, tests have only been made on VMS for Alpha.  VAX will come in time.
+$! ===========================================================================
+$!
+$! Announce/identify.
+$!
+$ proc = f$environment( "procedure")
+$ write sys$output "@@@ "+ -
+   f$parse( proc, , , "name")+ f$parse( proc, , , "type")
+$!
+$! Save the original default device:[directory].
+$!
+$ def_orig = f$environment( "default")
+$ on error then goto tidy
+$ on control_c then goto tidy
+$!
+$! SET DEFAULT to the main kit directory.
+$!
+$ proc = f$environment("procedure")
+$ proc = f$parse( "A.;", proc)- "A.;"
+$ set default 'proc'
+$ set default [-]
+$!
+$! ----- Prepare info for processing: version number and file info
+$ gosub read_version_info
+$ if libver .eqs. ""
+$ then
+$   write sys$error "ERROR: Couldn't find any library version info..."
+$   go to tidy:
+$ endif
+$
+$ if (f$getsyi("cpu") .lt. 128)
+$ then
+$   arch_vax = 1
+$   arch = "VAX"
+$ else
+$   arch_vax = 0
+$   arch = f$edit( f$getsyi( "ARCH_NAME"), "UPCASE")
+$   if (arch .eqs. "") then arch = "UNK"
+$ endif
+$!
+$ archd = arch
+$ lib32 = "32"
+$ shr = "SHR32"
+$!
+$ if (p1 .nes. "")
+$ then
+$   if (p1 .eqs. "64")
+$   then
+$     archd = arch+ "_64"
+$     lib32 = ""
+$     shr = "SHR"
+$   else
+$     if (p1 .nes. "32")
+$     then
+$       write sys$output "Second argument invalid."
+$       write sys$output "It should be "32", "64", or nothing."
+$       exit
+$     endif
+$   endif
+$ endif
+$!
+$! ----- Prepare info for processing: disabled algorithms info
+$ gosub read_disabled_algorithms_info
+$!
+$ ZLIB = p2
+$ zlib_lib = ""
+$ if (ZLIB .nes. "")
+$ then
+$   file2 = f$parse( ZLIB, "libz.olb", , , "syntax_only")
+$   if (f$search( file2) .eqs. "")
+$   then
+$     write sys$output ""
+$     write sys$output "The Option ", ZLIB, " Is Invalid."
+$     write sys$output "    Can't find library: ''file2'"
+$     write sys$output ""
+$     goto tidy
+$   endif
+$   zlib_lib = ", ''file2' /library"
+$ endif
+$!
+$ if (arch_vax)
+$ then
+$   libtit = "CRYPTO_TRANSFER_VECTOR"
+$   libid  = "Crypto"
+$   libnum = "[.UTIL]LIBEAY.NUM"
+$   libdir = "[.''ARCHD'.EXE.CRYPTO]"
+$   libmar = "''libdir'SSL_LIBCRYPTO_''shr'.MAR"
+$   libolb = "''libdir'SSL_LIBCRYPTO''lib32'.OLB"
+$   libopt = "''libdir'SSL_LIBCRYPTO_''shr'.OPT"
+$   libobj = "''libdir'SSL_LIBCRYPTO_''shr'.OBJ"
+$   libmap = "''libdir'SSL_LIBCRYPTO_''shr'.MAP"
+$   libgoal= "''libdir'SSL_LIBCRYPTO_''shr'.EXE"
+$   libref = ""
+$   libvec = "LIBCRYPTO"
+$   if f$search( libolb) .nes. "" then gosub create_vax_shr
+$   libtit = "SSL_TRANSFER_VECTOR"
+$   libid  = "SSL"
+$   libnum = "[.UTIL]SSLEAY.NUM"
+$   libdir = "[.''ARCHD'.EXE.SSL]"
+$   libmar = "''libdir'SSL_LIBSSL_''shr'.MAR"
+$   libolb = "''libdir'SSL_LIBSSL''lib32'.OLB"
+$   libopt = "''libdir'SSL_LIBSSL_''shr'.OPT"
+$   libobj = "''libdir'SSL_LIBSSL_''shr'.OBJ"
+$   libmap = "''libdir'SSL_LIBSSL_''shr'.MAP"
+$   libgoal= "''libdir'SSL_LIBSSL_''shr'.EXE"
+$   libref = "[.''ARCHD'.EXE.CRYPTO]SSL_LIBCRYPTO_''shr'.EXE"
+$   libvec = "LIBSSL"
+$   if f$search( libolb) .nes. "" then gosub create_vax_shr
+$ else
+$   libid  = "Crypto"
+$   libnum = "[.UTIL]LIBEAY.NUM"
+$   libdir = "[.''ARCHD'.EXE.CRYPTO]"
+$   libolb = "''libdir'SSL_LIBCRYPTO''lib32'.OLB"
+$   libopt = "''libdir'SSL_LIBCRYPTO_''shr'.OPT"
+$   libmap = "''libdir'SSL_LIBCRYPTO_''shr'.MAP"
+$   libgoal= "''libdir'SSL_LIBCRYPTO_''shr'.EXE"
+$   libref = ""
+$   if f$search( libolb) .nes. "" then gosub create_nonvax_shr
+$   libid  = "SSL"
+$   libnum = "[.UTIL]SSLEAY.NUM"
+$   libdir = "[.''ARCHD'.EXE.SSL]"
+$   libolb = "''libdir'SSL_LIBSSL''lib32'.OLB"
+$   libopt = "''libdir'SSL_LIBSSL_''shr'.OPT"
+$   libmap = "''libdir'SSL_LIBSSL_''shr'.MAP"
+$   libgoal= "''libdir'SSL_LIBSSL_''shr'.EXE"
+$   libref = "[.''ARCHD'.EXE.CRYPTO]SSL_LIBCRYPTO_''shr'.EXE"
+$   if f$search( libolb) .nes. "" then gosub create_nonvax_shr
+$ endif
+$!
+$ tidy:
+$!
+$! Close any open files.
+$!
+$ if (f$trnlnm( "libnum", "LNM$PROCESS", 0, "SUPERVISOR") .nes. "") then -
+   close libnum
+$!
+$ if (f$trnlnm( "mar", "LNM$PROCESS", 0, "SUPERVISOR") .nes. "") then -
+   close mar
+$!
+$ if (f$trnlnm( "opt", "LNM$PROCESS", 0, "SUPERVISOR") .nes. "") then -
+   close opt
+$!
+$ if (f$trnlnm( "vf", "LNM$PROCESS", 0, "SUPERVISOR") .nes. "") then -
+   close vf
+$!
+$! Restore the original default device:[directory].
+$!
+$ set default 'def_orig'
+$ exit
+$
+$! ----- Subroutines to build the shareable libraries
+$! For each supported architecture, there's a main shareable library
+$! creator, which is called from the main code above.
+$! The creator will define a number of variables to tell the next levels of
+$! subroutines what routines to use to write to the option files, call the
+$! main processor, read_func_num, and when that is done, it will write version
+$! data at the end of the .opt file, close it, and link the library.
+$!
+$! read_func_num reads through a .num file and calls the writer routine for
+$! each line.  It's also responsible for checking that order is properly kept
+$! in the .num file, check that each line applies to VMS and the architecture,
+$! and to fill in "holes" with dummy entries.
+$!
+$! The creator routines depend on the following variables:
+$! libnum	The name of the .num file to use as input
+$! libolb	The name of the object library to build from
+$! libid	The identification string of the shareable library
+$! libopt	The name of the .opt file to write
+$! libtit	The title of the assembler transfer vector file (VAX only)
+$! libmar	The name of the assembler transfer vector file (VAX only)
+$! libmap	The name of the map file to write
+$! libgoal	The name of the shareable library to write
+$! libref	The name of a shareable library to link in
+$!
+$! read_func_num depends on the following variables from the creator:
+$! libwriter	The name of the writer routine to call for each .num file line
+$! -----
+$
+$! ----- Subroutines for non-VAX
+$! -----
+$! The creator routine
+$ create_nonvax_shr:
+$   open /write opt 'libopt'
+$   write opt "identification=""",libid," ",libverstr,""""
+$   write opt libolb, " /library"
+$   if libref .nes. "" then write opt libref,"/SHARE"
+$   write opt "SYMBOL_VECTOR=(-"
+$   libfirstentry := true
+$   libwrch   := opt
+$   libwriter := write_nonvax_transfer_entry
+$   textcount = 0
+$   gosub read_func_num
+$   write opt ")"
+$   write opt "GSMATCH=",libvmatch,",",libver
+$   close opt
+$   link /map = 'libmap' /full /share = 'libgoal' 'libopt' /options -
+     'zlib_lib'
+$   return
+$
+$! The record writer routine
+$ write_nonvax_transfer_entry:
+$   if libentry .eqs. ".dummy" then return
+$   if info_kind .eqs. "VARIABLE"
+$   then
+$     pr:=DATA
+$   else
+$     pr:=PROCEDURE
+$   endif
+$   textcount_this = f$length(pr) + f$length(libentry) + 5
+$   if textcount + textcount_this .gt. 1024
+$   then
+$     write opt ")"
+$     write opt "SYMBOL_VECTOR=(-"
+$     textcount = 16
+$     libfirstentry := true
+$   endif
+$   if libfirstentry
+$   then
+$     write 'libwrch' "    ",libentry,"=",pr," -"
+$   else
+$     write 'libwrch' "    ,",libentry,"=",pr," -"
+$   endif
+$   libfirstentry := false
+$   textcount = textcount + textcount_this
+$   return
+$
+$! ----- Subroutines for VAX
+$! -----
+$! The creator routine
+$ create_vax_shr:
+$   open /write mar 'libmar'
+$   type sys$input:/out=mar:
+;
+; Transfer vector for VAX shareable image
+;
+$   write mar "	.TITLE ",libtit
+$   write mar "	.IDENT /",libid,"/"
+$   type sys$input:/out=mar:
+;
+; Define macro to assist in building transfer vector entries.  Each entry
+; should take no more than 8 bytes.
+;
+	.MACRO FTRANSFER_ENTRY routine
+	.ALIGN QUAD
+	.TRANSFER routine
+	.MASK	routine
+	JMP	routine+2
+	.ENDM FTRANSFER_ENTRY
+;
+; Place entries in own program section.
+;
+$   write mar "	.PSECT $$",libvec,",QUAD,PIC,USR,CON,REL,LCL,SHR,EXE,RD,NOWRT"
+$   write mar libvec,"_xfer:"
+$   libwrch   := mar
+$   libwriter := write_vax_ftransfer_entry
+$   gosub read_func_num
+$   type sys$input:/out=mar:
+;
+; Allocate extra storage at end of vector to allow for expansion.
+;
+$   write mar "	.BLKB 32768-<.-",libvec,"_xfer>	; 64 pages total."
+$!   libwriter := write_vax_vtransfer_entry
+$!   gosub read_func_num
+$   write mar "	.END"
+$   close mar
+$   open /write opt 'libopt'
+$   write opt "identification=""",libid," ",libverstr,""""
+$   write opt libobj
+$   write opt libolb, " /library"
+$   if libref .nes. "" then write opt libref,"/SHARE"
+$   type sys$input:/out=opt:
+!
+! Ensure transfer vector is at beginning of image
+!
+CLUSTER=FIRST
+$   write opt "COLLECT=FIRST,$$",libvec
+$   write opt "GSMATCH=",libvmatch,",",libver
+$   type sys$input:/out=opt:
+!
+! make psects nonshareable so image can be installed.
+!
+PSECT_ATTR=$CHAR_STRING_CONSTANTS,NOWRT
+$   libwrch   := opt
+$   libwriter := write_vax_psect_attr
+$   gosub read_func_num
+$   close opt
+$   macro/obj='libobj' 'libmar'
+$   link /map = 'libmap' /full /share = 'libgoal' 'libopt' /options -
+     'zlib_lib'
+$   return
+$
+$! The record writer routine for VAX functions
+$ write_vax_ftransfer_entry:
+$   if info_kind .nes. "FUNCTION" then return
+$   if libentry .eqs ".dummy"
+$   then
+$     write 'libwrch' "	.BLKB 8" ! Dummy is zeroes...
+$   else
+$     write 'libwrch' "	FTRANSFER_ENTRY ",libentry
+$   endif
+$   return
+$! The record writer routine for VAX variables (should never happen!)
+$ write_vax_psect_attr:
+$   if info_kind .nes. "VARIABLE" then return
+$   if libentry .eqs ".dummy" then return
+$   write 'libwrch' "PSECT_ATTR=",libentry,",NOSHR"
+$   return
+$
+$! ----- Common subroutines
+$! -----
+$! The .num file reader.  This one has great responsibility.
+$ read_func_num:
+$   open /read libnum 'libnum'
+$   goto read_nums
+$
+$ read_nums:
+$   libentrynum=0
+$   liblastentry:=false
+$   entrycount=0
+$   loop:
+$     read /end=loop_end /err=loop_end libnum line
+$     lin = f$edit( line, "COMPRESS,TRIM")
+$!    Skip a "#" comment line.
+$     if (f$extract( 0, 1, lin) .eqs. "#") then goto loop
+$     entrynum = f$int(f$element( 1, " ", lin))
+$     entryinfo = f$element( 2, " ", lin)
+$     curentry = f$element( 0, " ", lin)
+$     info_exist = f$element( 0, ":", entryinfo)
+$     info_platforms = ","+ f$element(1, ":", entryinfo)+ ","
+$     info_kind = f$element( 2, ":", entryinfo)
+$     info_algorithms = ","+ f$element( 3, ":", entryinfo)+ ","
+$     if info_exist .eqs. "NOEXIST" then goto loop
+$     truesum = 0
+$     falsesum = 0
+$     negatives = 1
+$     plat_i = 0
+$     loop1:
+$       plat_entry = f$element( plat_i, ",", info_platforms)
+$       plat_i = plat_i + 1
+$       if plat_entry .eqs. "" then goto loop1
+$       if plat_entry .nes. ","
+$       then
+$         if f$extract(0,1,plat_entry) .nes. "!" then negatives = 0
+$         if (arch_vax)
+$         then
+$           if plat_entry .eqs. "EXPORT_VAR_AS_FUNCTION" then -
+$             truesum = truesum + 1
+$           if plat_entry .eqs. "!EXPORT_VAR_AS_FUNCTION" then -
+$             falsesum = falsesum + 1
+$         endif
+$!
+$         if ((plat_entry .eqs. "VMS") .or. -
+            ((plat_entry .eqs. "ZLIB") .and. (ZLIB .nes. "")) .or. -
+            (arch_vax .and. (plat_entry .eqs. "VMSVAX"))) then -
+            truesum = truesum + 1
+$!
+$         if ((plat_entry .eqs. "!VMS") .or. -
+            (arch_vax .and. (plat_entry .eqs. "!VMSVAX"))) then -
+            falsesum = falsesum + 1
+$!
+$	  goto loop1
+$       endif
+$     endloop1:
+$!DEBUG!$     if info_platforms - "EXPORT_VAR_AS_FUNCTION" .nes. info_platforms
+$!DEBUG!$     then
+$!DEBUG!$       write sys$output line
+$!DEBUG!$       write sys$output "        truesum = ",truesum,-
+$!DEBUG!		", negatives = ",negatives,", falsesum = ",falsesum
+$!DEBUG!$     endif
+$     if falsesum .ne. 0 then goto loop
+$     if truesum+negatives .eq. 0 then goto loop
+$     alg_i = 0
+$     loop2:
+$       alg_entry = f$element(alg_i,",",info_algorithms)
+$	alg_i = alg_i + 1
+$       if alg_entry .eqs. "" then goto loop2
+$       if alg_entry .nes. ","
+$       then
+$	  if disabled_algorithms - ("," + alg_entry + ",") .nes disabled_algorithms then goto loop
+$         if f$trnlnm("OPENSSL_NO_"+alg_entry) .nes. "" then goto loop
+$	  goto loop2
+$       endif
+$     endloop2:
+$     if info_platforms - "EXPORT_VAR_AS_FUNCTION" .nes. info_platforms
+$     then
+$!DEBUG!$     write sys$output curentry," ; ",entrynum," ; ",entryinfo
+$     endif
+$   redo:
+$     next:=loop
+$     tolibentry=curentry
+$     if libentrynum .ne. entrynum
+$     then
+$       entrycount=entrycount+1
+$       if entrycount .lt. entrynum
+$       then
+$!DEBUG!$         write sys$output "Info: entrycount: ''entrycount', entrynum: ''entrynum' => 0"
+$         tolibentry=".dummy"
+$         next:=redo
+$       endif
+$       if entrycount .gt. entrynum
+$       then
+$         write sys$error "Decreasing library entry numbers!  Can't continue"
+$         write sys$error """",line,""""
+$         close libnum
+$         return
+$       endif
+$       libentry=tolibentry
+$!DEBUG!$       write sys$output entrycount," ",libentry," ",entryinfo
+$       if libentry .nes. "" .and. libwriter .nes. "" then gosub 'libwriter'
+$     else
+$       write sys$error "Info: ""''curentry'"" is an alias for ""''libentry'"".  Overriding..."
+$     endif
+$     libentrynum=entrycount
+$     goto 'next'
+$   loop_end:
+$   close libnum
+$   return
+$
+$! The version number reader
+$ read_version_info:
+$   libver = ""
+$   open /read vf [.CRYPTO]OPENSSLV.H
+$   loop_rvi:
+$     read/err=endloop_rvi/end=endloop_rvi vf rvi_line
+$     if rvi_line - "SHLIB_VERSION_NUMBER """ .eqs. rvi_line then -
+	goto loop_rvi
+$     libverstr = f$element(1,"""",rvi_line)
+$     libvmajor = f$element(0,".",libverstr)
+$     libvminor = f$element(1,".",libverstr)
+$     libvedit = f$element(2,".",libverstr)
+$     libvpatch = f$cvui(0,8,f$extract(1,1,libvedit)+"@")-f$cvui(0,8,"@")
+$     libvedit = f$extract(0,1,libvedit)
+$     libver = f$string(f$int(libvmajor)*100)+","+-
+	f$string(f$int(libvminor)*100+f$int(libvedit)*10+f$int(libvpatch))
+$     if libvmajor .eqs. "0"
+$     then
+$       libvmatch = "EQUAL"
+$     else
+$       ! Starting with the 1.0 release, backward compatibility should be
+$       ! kept, so switch over to the following
+$       libvmatch = "LEQUAL"
+$     endif
+$   endloop_rvi:
+$   close vf
+$   return
+$
+$! The disabled algorithms reader
+$ read_disabled_algorithms_info:
+$   disabled_algorithms = ","
+$   open /read cf [.CRYPTO.'ARCH']OPENSSLCONF.H
+$   loop_rci:
+$     read/err=endloop_rci/end=endloop_rci cf rci_line
+$     rci_line = f$edit(rci_line,"TRIM,COMPRESS")
+$     rci_ei = 0
+$     if f$extract(0,9,rci_line) .eqs. "# define " then rci_ei = 2
+$     if f$extract(0,8,rci_line) .eqs. "#define " then rci_ei = 1
+$     if rci_ei .eq. 0 then goto loop_rci
+$     rci_e = f$element(rci_ei," ",rci_line)
+$     if f$extract(0,11,rci_e) .nes. "OPENSSL_NO_" then goto loop_rci
+$     disabled_algorithms = disabled_algorithms + f$extract(11,999,rci_e) + ","
+$     goto loop_rci
+$   endloop_rci:
+$   close cf
+$   return

VMS/multinet_shr.opt

@@ -0,0 +1 @@
+multinet:multinet_socket_library.exe/share

VMS/openssl_shutdown.com.in

@@ -1,59 +0,0 @@
-$	! OpenSSL shutdown script
-$	!
-$	! This script deassigns the logical names used by the installation
-$	! of OpenSSL.  It can do so at any level, defined by P1.
-$	!
-$	! P1	Qualifier(s) for DEASSIGN.
-$	!	Default: /PROCESS
-$	!
-$	! P2	If the value is "NOALIASES", no alias logical names are
-$	!	deassigned.
-$
-$	status = %x10000001	! Generic success
-$
-$	! In case there's a problem
-$	ON CONTROL_Y THEN GOTO bailout
-$	ON ERROR THEN GOTO bailout
-$
-$	! Find the architecture
-$	IF F$GETSYI("CPU") .LT. 128
-$	THEN
-$	    arch := VAX
-$	ELSE
-$	    arch := F$EDIT(F$GETSYI("ARCH_NAME"),"UPCASE")
-$	    IF arch .EQS. "" THEN GOTO unknown_arch
-$	ENDIF
-$
-$	! Generated information
-$	VERSION := {- $config{version} -}
-$	INSTALLTOP := {- $config{INSTALLTOP} -}
-$	POINTER_SIZE = {- $config{pointersize} -}
-$
-$	! Abbrevs
-$	DEAS := DEASSIGN /NOLOG 'P1'
-$	v    =  VERSION - "." - "."
-$
-$	DEAS OSSL$ROOT'v'
-$	DEAS OSSL$INCLUDE'v'
-$	DEAS OSSL$LIB'v'
-$	DEAS OSSL$SHARE'v'
-$	DEAS OSSL$ENGINES'v'
-$	DEAS OSSL$EXE'v'
-$       {- output_off() if $config{no_shared} -}
-$       {- join("\n\$       ", map { "DEAS $_'v'" } map { $unified_info{sharednames}->{$_} || () } @{$unified_info{libraries}}) -}
-$       {- output_on() -}
-$	IF P2 .NES. "NOALIASES"
-$	THEN
-$	    DEAS OSSL$ROOT
-$	    DEAS OSSL$INCLUDE
-$	    DEAS OSSL$LIB
-$	    DEAS OSSL$SHARE
-$	    DEAS OSSL$ENGINES
-$	    DEAS OSSL$EXE
-$	    DEAS OPENSSL
-$           {- output_off() if $config{no_shared} -}
-$           {- join("\n\$           ", map { "DEAS $_" } map { $unified_info{sharednames}->{$_} || () } @{$unified_info{libraries}}) -}
-$           {- output_on() -}
-$	ENDIF
-$
-$	EXIT 'status'

VMS/openssl_startup.com

@@ -0,0 +1,108 @@
+$!
+$! Startup file for OpenSSL 1.x.
+$!
+$! 2011-03-05 SMS.
+$!
+$! This procedure must reside in the OpenSSL installation directory.
+$! It will fail if it is copied to a different location.
+$!
+$! P1  qualifier(s) for DEFINE.  For example, "/SYSTEM" to get the
+$!     logical names defined in the system logical name table.
+$!
+$! P2  "64", to use executables which were built with 64-bit pointers.
+$!
+$! Good (default) and bad status values.
+$!
+$ status =    %x00010001 ! RMS$_NORMAL, normal successful completion.
+$ rms_e_fnf = %x00018292 ! RMS$_FNF, file not found.
+$!
+$! Prepare for problems.
+$!
+$ orig_dev_dir = f$environment( "DEFAULT")
+$ on control_y then goto clean_up
+$ on error then goto clean_up
+$!
+$! Determine hardware architecture.
+$!
+$ if (f$getsyi( "cpu") .lt. 128)
+$ then
+$   arch_name = "VAX"
+$ else
+$   arch_name = f$edit( f$getsyi( "arch_name"), "upcase")
+$   if (arch_name .eqs. "") then arch_name = "UNK"
+$ endif
+$!
+$ if (p2 .eqs. "64")
+$ then
+$   arch_name_exe = arch_name+ "_64"
+$ else
+$   arch_name_exe = arch_name
+$ endif
+$!
+$! Derive the OpenSSL installation device:[directory] from the location
+$! of this command procedure.
+$!
+$ proc = f$environment( "procedure")
+$ proc_dev_dir = f$parse( "A.;", proc, , , "no_conceal") - "A.;"
+$ proc_dev = f$parse( proc_dev_dir, , , "device", "syntax_only")
+$ proc_dir = f$parse( proc_dev_dir, , , "directory", "syntax_only") - -
+   ".][000000"- "[000000."- "]["- "["- "]"
+$ proc_dev_dir = proc_dev+ "["+ proc_dir+ "]"
+$ set default 'proc_dev_dir'
+$ set default [-]
+$ ossl_dev_dir = f$environment( "default")
+$!
+$! Check existence of expected directories (to see if this procedure has
+$! been moved away from its proper place).
+$!
+$ if ((f$search( "certs.dir;1") .eqs. "") .or. -
+   (f$search( "include.dir;1") .eqs. "") .or. -
+   (f$search( "private.dir;1") .eqs. "") .or. -
+   (f$search( "vms.dir;1") .eqs. ""))
+$ then
+$    write sys$output -
+      "   Can't find expected common OpenSSL directories in:"
+$    write sys$output "   ''ossl_dev_dir'"
+$    status = rms_e_fnf
+$    goto clean_up
+$ endif
+$!
+$ if ((f$search( "''arch_name_exe'_exe.dir;1") .eqs. "") .or. -
+   (f$search( "''arch_name'_lib.dir;1") .eqs. ""))
+$ then
+$    write sys$output -
+      "   Can't find expected architecture-specific OpenSSL directories in:"
+$    write sys$output "   ''ossl_dev_dir'"
+$    status = rms_e_fnf
+$    goto clean_up
+$ endif
+$!
+$! All seems well (enough).  Define the OpenSSL logical names.
+$!
+$ ossl_root = ossl_dev_dir- "]"+ ".]"
+$ define /translation_attributes = concealed /nolog'p1 SSLROOT 'ossl_root'
+$ define /nolog 'p1' SSLCERTS     sslroot:[certs]
+$ define /nolog 'p1' SSLINCLUDE   sslroot:[include]
+$ define /nolog 'p1' SSLPRIVATE   sslroot:[private]
+$ define /nolog 'p1' SSLEXE       sslroot:['arch_name_exe'_exe]
+$ define /nolog 'p1' SSLLIB       sslroot:['arch_name'_lib]
+$!
+$! Defining OPENSSL lets a C program use "#include <openssl/{foo}.h>":
+$ define /nolog 'p1' OPENSSL      SSLINCLUDE:
+$!
+$! Run a site-specific procedure, if it exists.
+$!
+$ if f$search( "sslroot:[vms]openssl_systartup.com") .nes."" then -
+   @ sslroot:[vms]openssl_systartup.com
+$!
+$! Restore the original default dev:[dir] (if known).
+$!
+$ clean_up:
+$!
+$ if (f$type( orig_dev_dir) .nes. "")
+$ then
+$    set default 'orig_dev_dir'
+$ endif
+$!
+$ EXIT 'status'
+$!

VMS/openssl_startup.com.in

@@ -1,115 +0,0 @@
-$	! OpenSSL startup script
-$	!
-$	! This script defines the logical names used by the installation
-$	! of OpenSSL.  It can provide those logical names at any level,
-$	! defined by P1.
-$	!
-$	! The logical names created are:
-$	!
-$	!	OSSL$ROOTnnn	Installation root
-$	!	OSSL$EXEnnn	Where the executables are located
-$	!	OSSL$LIBnnn	Where the library files are located
-$	!	OSSL$SHAREnnn	Where the sahreable images are located
-$	!	OSSL$INCLUDEnnn	Include directory root
-$	!	OSSL$ENGINESnnn	Where the sahreable images are located
-$	!
-$	! In all these, nnn is the OpenSSL version number.  This allows
-$	! several OpenSSL versions to be installed simultaneously.
-$	!
-$	! In addition, unless P2 is "NOALIASES", these logical names are
-$	! created:
-$	!
-$	!	OSSL$ROOT	Alias for OSSL$ROOTnnn
-$	!	OSSL$EXE	Alias for OSSL$EXEnnn
-$	!	OSSL$LIB	Alias for OSSL$LIBnnn
-$	!	OSSL$SHARE	Alias for OSSL$SHAREnnn
-$	!	OSSL$INCLUDE	Alias for OSSL$INCLUDEnnn
-$	!	OPENSSL		is OSSL$INCLUDE:[OPENSSL]
-$	!	OSSL$ENGINES	Alias for OSSL$ENGINESnnn
-$	!
-$	! P1	Qualifier(s) for DEFINE.  "/SYSTEM" would be typical when
-$	!	calling this script from SYS$STARTUP:SYSTARTUP_VMS.COM,
-$	!	while "/PROCESS" would be typical for a personal install.
-$	!	Default: /PROCESS
-$	!
-$	! P2	If the value is "NOALIASES", no alias logical names are
-$	!	created.
-$
-$	status = %x10000001	! Generic success
-$
-$	! In case there's a problem
-$	ON CONTROL_Y THEN GOTO bailout
-$	ON ERROR THEN GOTO bailout
-$
-$	! Find the architecture
-$	IF F$GETSYI("CPU") .LT. 128
-$	THEN
-$	    arch := VAX
-$	ELSE
-$	    arch := F$EDIT(F$GETSYI("ARCH_NAME"),"UPCASE")
-$	    IF arch .EQS. "" THEN GOTO unknown_arch
-$	ENDIF
-$
-$	! Generated information
-$	VERSION := {- $config{version} -}
-$	INSTALLTOP := {- $config{INSTALLTOP} -}
-$	OPENSSLDIR := {- $config{OPENSSLDIR} -}
-$	POINTER_SIZE = {- $config{pointersize} -}
-$
-$	! Make sure that INSTALLTOP and OPENSSLDIR become something one
-$	! can build concealed logical names on
-$	INSTALLTOP_ = F$PARSE("A.;",INSTALLTOP,,,"NO_CONCEAL") - "A.;" -
-		     - ".][000000" - "[000000." - "][" - "]" + ".]"
-$	OPENSSLDIR_ = F$PARSE("A.;",OPENSSLDIR,,,"NO_CONCEAL") - "A.;" -
-		     - ".][000000" - "[000000." - "][" - "]" + ".]"
-$	DEFINE /TRANSLATION=CONCEALED /NOLOG WRK_INSTALLTOP 'INSTALLTOP_'
-$
-$	! Check that things are in place, and specifically, the stuff
-$	! belonging to this architecture
-$	IF F$SEARCH("WRK_INSTALLTOP:[000000]INCLUDE.DIR;1") .EQS. "" -
-	   .OR. F$SEARCH("WRK_INSTALLTOP:[000000]''arch'.DIR;1") .EQS. "" -
-	   .OR. F$SEARCH("WRK_INSTALLTOP:[''arch']LIB.DIR;1") .EQS. "" -
-	   .OR. F$SEARCH("WRK_INSTALLTOP:[''arch']EXE.DIR;1") .EQS. "" -
-	   .OR. F$SEARCH("WRK_INSTALLTOP:[000000]openssl.cnf;1") .EQS. ""
-$	THEN
-$	    WRITE SYS$ERROR "''INSTALLTOP' doesn't look like an OpenSSL installation for ''arch'"
-$	    status = %x00018292 ! RMS$_FNF, file not found
-$	    GOTO bailout
-$	ENDIF
-$
-$	! Abbrevs
-$	DEFT := DEFINE /TRANSLATION=CONCEALED /NOLOG 'P1'
-$	DEF  := DEFINE /NOLOG 'P1'
-$	v    =  VERSION - "." - "."
-$
-$	DEFT OSSL$INSTROOT'v'	'INSTALLTOP_'
-$	DEFT OSSL$INCLUDE'v'	OSSL$INSTROOT:[INCLUDE.]
-$	DEF  OSSL$LIB'v'	OSSL$INSTROOT:['arch'.LIB]
-$	DEF  OSSL$SHARE'v'	OSSL$INSTROOT:['arch'.LIB]
-$	DEF  OSSL$ENGINES'v'	OSSL$INSTROOT:['arch'.ENGINES]
-$	DEF  OSSL$EXE'v'	OSSL$INSTROOT:['arch'.EXE]
-$       {- output_off() if $config{no_shared} -}
-$       {- join("\n\$       ", map { "DEF  $_'v' OSSL\$SHARE:$_" } map { $unified_info{sharednames}->{$_} || () } @{$unified_info{libraries}}) -}
-$       {- output_on() -}
-$	IF P2 .NES. "NOALIASES"
-$	THEN
-$	    DEF OSSL$INSTROOT	OSSL$INSTROOT'v'
-$	    DEF OSSL$INCLUDE	OSSL$INCLUDE'v'
-$	    DEF OSSL$LIB	OSSL$LIB'v'
-$	    DEF OSSL$SHARE	OSSL$SHARE'v'
-$	    DEF OSSL$ENGINES	OSSL$ENGINES'v'
-$	    DEF OSSL$EXE	OSSL$EXE'v'
-$	    DEF OPENSSL		OSSL$INCLUDE:[OPENSSL]
-$       {- output_off() if $config{no_shared} -}
-$       {- join("\n\$           ", map { "DEF  $_ $_'v'" } map { $unified_info{sharednames}->{$_} || () } @{$unified_info{libraries}}) -}
-$       {- output_on() -}
-$	ENDIF
-$
-$	DEFT OSSL$DATAROOT	'OPENSSLDIR_'
-$	DEF  OSSL$CERTS		OSSL$DATAROOT:[CERTS]
-$	DEF  OSSL$PRIVATE	OSSL$DATAROOT:[PRIVATE]
-$
-$ bailout:
-$	DEASSIGN WRK_INSTALLTOP
-$
-$	EXIT 'status'

VMS/openssl_undo.com

@@ -0,0 +1,20 @@
+$!
+$! Deassign OpenSSL logical names.
+$!
+$ call deass "OPENSSL" "''p1'"
+$ call deass "SSLCERTS" "''p1'"
+$ call deass "SSLEXE" "''p1'"
+$ call deass "SSLINCLUDE" "''p1'"
+$ call deass "SSLLIB" "''p1'"
+$ call deass "SSLPRIVATE" "''p1'"
+$ call deass "SSLROOT" "''p1'"
+$!
+$ exit
+$!
+$deass: subroutine
+$ if (f$trnlnm( p1) .nes. "")
+$ then
+$    deassign 'p2' 'p1'
+$ endif
+$ endsubroutine
+$!

VMS/openssl_utils.com

@@ -1,12 +1,46 @@
-$	! OpenSSL utilities
-$	!
+$!
+$!  APPS.COM
+$!  Written By:  Robert Byer
+$!               Vice-President
+$!               A-Com Computing, Inc.
+$!               byer@mail.all-net.net
+$!
+$!
+$! Slightly modified by Richard Levitte <richard@levitte.org>
+$!
+$!
+$! Always define OPENSSL.  Others are optional (non-null P1).
+$!
+$ OPENSSL  :== $SSLEXE:OPENSSL
 $
-$	OPENSSL		:== $OSSL$EXE:OPENSSL
-$
-$	IF F$SYMBOL(PERL) .EQS. "STRING"
-$	THEN
-$	    OSSLCA	:== 'PERL' OSSL$EXE:CA.pl
-$	    OSSLREHASH	:== 'PERL' OSSL$EXE:c_rehash.pl
-$	ELSE
-$	    WRITE SYS$ERROR "NOTE: no perl => no OSSLCA or OSSLREHASH"
-$	ENDIF
+$ IF (P1 .NES. "")
+$ THEN
+$     VERIFY   :== $SSLEXE:OPENSSL VERIFY
+$     ASN1PARSE:== $SSLEXE:OPENSSL ASN1PARS
+$! REQ could conflict with REQUEST.
+$     OREQ     :== $SSLEXE:OPENSSL REQ
+$     DGST     :== $SSLEXE:OPENSSL DGST
+$     DH       :== $SSLEXE:OPENSSL DH
+$     ENC      :== $SSLEXE:OPENSSL ENC
+$     GENDH    :== $SSLEXE:OPENSSL GENDH
+$     ERRSTR   :== $SSLEXE:OPENSSL ERRSTR
+$     CA       :== $SSLEXE:OPENSSL CA
+$     CRL      :== $SSLEXE:OPENSSL CRL
+$     RSA      :== $SSLEXE:OPENSSL RSA
+$     DSA      :== $SSLEXE:OPENSSL DSA
+$     DSAPARAM :== $SSLEXE:OPENSSL DSAPARAM
+$     X509     :== $SSLEXE:OPENSSL X509
+$     GENRSA   :== $SSLEXE:OPENSSL GENRSA
+$     GENDSA   :== $SSLEXE:OPENSSL GENDSA
+$     S_SERVER :== $SSLEXE:OPENSSL S_SERVER
+$     S_CLIENT :== $SSLEXE:OPENSSL S_CLIENT
+$     SPEED    :== $SSLEXE:OPENSSL SPEED
+$     S_TIME   :== $SSLEXE:OPENSSL S_TIME
+$     VERSION  :== $SSLEXE:OPENSSL VERSION
+$     PKCS7    :== $SSLEXE:OPENSSL PKCS7
+$     CRL2PKCS7:== $SSLEXE:OPENSSL CRL2P7
+$     SESS_ID  :== $SSLEXE:OPENSSL SESS_ID
+$     CIPHERS  :== $SSLEXE:OPENSSL CIPHERS
+$     NSEQ     :== $SSLEXE:OPENSSL NSEQ
+$     PKCS12   :== $SSLEXE:OPENSSL PKCS12
+$ ENDIF

VMS/socketshr_shr.opt

@@ -0,0 +1 @@
+socketshr/share

VMS/tcpip_shr_decc.opt

@@ -0,0 +1 @@
+sys$share:tcpip$ipc_shr.exe/share

VMS/translatesyms.pl

@@ -1,55 +0,0 @@
-#! /usr/bin/perl
-
-# This script will translate any SYMBOL_VECTOR item that has a translation
-# in CXX$DEMANGLER_DB.  The latter is generated by and CC/DECC command that
-# uses the qualifier /REPOSITORY with the build directory as value.  When
-# /NAMES=SHORTENED has been used, this file will hold the translations from
-# the original symbols to the shortened variants.
-#
-# CXX$DEMAGLER_DB. is an ISAM file, but with the magic of RMS, it can be
-# read as a text file, with each record as one line.
-#
-# The lines will have the following syntax for any symbol found that's longer
-# than 31 characters:
-#
-# LONG_symbol_34567890123{cksum}$LONG_symbol_34567890123_more_than_31_chars
-#
-# $ is present at the end of the shortened symbol name, and is preceded by a
-# 7 character checksum.  The $ makes it easy to separate the shortened name
-# from the original one.
-
-use strict;
-use warnings;
-
-usage() if scalar @ARGV < 1;
-
-my %translations = ();
-
-open DEMANGLER_DATA, $ARGV[0]
-    or die "Couldn't open $ARGV[0]: $!\n";
-while(<DEMANGLER_DATA>) {
-    s|\R$||;
-    (my $translated, my $original) = split /\$/;
-    $translations{$original} = $translated.'$';
-}
-close DEMANGLER_DATA;
-
-$| = 1;                         # Autoflush
-while(<STDIN>) {
-    s@
-      ((?:[A-Za-z0-9_]+)\/)?([A-Za-z0-9_]+)=(PROCEDURE|DATA)
-     @
-      if (defined($translations{$2})) {
-          my $trans = $translations{$2};
-          my $trans_uc = uc $trans;
-          if (defined($1) && $trans ne $trans_uc) {
-              "$trans_uc/$trans=$3"
-          } else {
-              "$trans=$3"
-          }
-      } else {
-          $&
-      }
-     @gxe;
-    print $_;
-}

VMS/ucx_shr_decc.opt

@@ -0,0 +1 @@
+sys$share:ucx$ipc_shr.exe/share

VMS/ucx_shr_decc_log.opt

@@ -0,0 +1 @@
+ucx$ipc_shr/share

VMS/ucx_shr_vaxc.opt

@@ -0,0 +1 @@
+sys$library:ucx$ipc.olb/library

apps/.cvsignore

@@ -0,0 +1,8 @@
+openssl
+Makefile.save
+der_chop
+der_chop.bak
+CA.pl
+*.flc
+semantic.cache
+*.dll

apps/CA.com

@@ -0,0 +1,236 @@
+$! CA - wrapper around ca to make it easier to use ... basically ca requires
+$!      some setup stuff to be done before you can use it and this makes
+$!      things easier between now and when Eric is convinced to fix it :-)
+$!
+$! CA -newca ... will setup the right stuff
+$! CA -newreq ... will generate a certificate request 
+$! CA -sign ... will sign the generated request and output 
+$!
+$! At the end of that grab newreq.pem and newcert.pem (one has the key 
+$! and the other the certificate) and cat them together and that is what
+$! you want/need ... I'll make even this a little cleaner later.
+$!
+$!
+$! 12-Jan-96 tjh    Added more things ... including CA -signcert which
+$!                  converts a certificate to a request and then signs it.
+$! 10-Jan-96 eay    Fixed a few more bugs and added the SSLEAY_CONFIG
+$!                 environment variable so this can be driven from
+$!                 a script.
+$! 25-Jul-96 eay    Cleaned up filenames some more.
+$! 11-Jun-96 eay    Fixed a few filename missmatches.
+$! 03-May-96 eay    Modified to use 'openssl cmd' instead of 'cmd'.
+$! 18-Apr-96 tjh    Original hacking
+$!
+$! Tim Hudson
+$! tjh@cryptsoft.com
+$!
+$!
+$! default ssleay.cnf file has setup as per the following
+$! demoCA ... where everything is stored
+$
+$ IF F$TYPE(SSLEAY_CONFIG) .EQS. "" THEN SSLEAY_CONFIG := SSLLIB:SSLEAY.CNF
+$
+$ DAYS   = "-days 365"
+$ REQ    = openssl + " req " + SSLEAY_CONFIG
+$ CA     = openssl + " ca " + SSLEAY_CONFIG
+$ VERIFY = openssl + " verify"
+$ X509   = openssl + " x509"
+$ PKCS12 = openssl + " pkcs12"
+$ echo   = "write sys$Output"
+$ RET = 1
+$!
+$! 2010-12-20 SMS.
+$! Use a concealed logical name to reduce command line lengths, to
+$! avoid DCL errors on VAX:
+$!     %DCL-W-TKNOVF, command element is too long - shorten
+$! (Path segments like "openssl-1_0_1-stable-SNAP-20101217" accumulate
+$! quickly.)
+$!
+$ CATOP = F$PARSE( F$ENVIRONMENT( "DEFAULT"), "[]")- "].;"+ ".demoCA.]"
+$ define /translation_attributes = concealed CATOP 'CATOP'
+$!
+$ on error then goto clean_up
+$ on control_y then goto clean_up
+$!
+$ CAKEY  = "CATOP:[private]cakey.pem"
+$ CACERT = "CATOP:[000000]cacert.pem"
+$
+$ __INPUT := SYS$COMMAND
+$!
+$ i = 1
+$opt_loop:
+$ if i .gt. 8 then goto opt_loop_end
+$
+$ prog_opt = F$EDIT(P'i',"lowercase")
+$
+$ IF (prog_opt .EQS. "?" .OR. prog_opt .EQS. "-h" .OR. prog_opt .EQS. "-help") 
+$ THEN
+$   echo "usage: CA -newcert|-newreq|-newca|-sign|-verify" 
+$   goto clean_up
+$ ENDIF
+$!
+$ IF (prog_opt .EQS. "-input")
+$ THEN
+$   ! Get input from somewhere other than SYS$COMMAND
+$   i = i + 1
+$   __INPUT = P'i'
+$   GOTO opt_loop_continue
+$ ENDIF
+$!
+$ IF (prog_opt .EQS. "-newcert")
+$ THEN
+$   ! Create a certificate.
+$   DEFINE /USER_MODE SYS$INPUT '__INPUT'
+$   REQ -new -x509 -keyout newreq.pem -out newreq.pem 'DAYS'
+$   RET=$STATUS
+$   echo "Certificate (and private key) is in newreq.pem"
+$   GOTO opt_loop_continue
+$ ENDIF
+$!
+$ IF (prog_opt .EQS. "-newreq")
+$ THEN
+$   ! Create a certificate request
+$   DEFINE /USER_MODE SYS$INPUT '__INPUT'
+$   REQ -new -keyout newreq.pem -out newreq.pem 'DAYS'
+$   RET=$STATUS
+$   echo "Request (and private key) is in newreq.pem"
+$   GOTO opt_loop_continue
+$ ENDIF
+$!
+$ IF (prog_opt .EQS. "-newca")
+$ THEN
+$   ! If explicitly asked for or it doesn't exist then setup the directory
+$   ! structure that Eric likes to manage things.
+$   IF F$SEARCH( "CATOP:[000000]serial.") .EQS. ""
+$   THEN
+$     CREATE /DIRECTORY /PROTECTION=OWNER:RWED CATOP:[000000]
+$     CREATE /DIRECTORY /PROTECTION=OWNER:RWED CATOP:[certs]
+$     CREATE /DIRECTORY /PROTECTION=OWNER:RWED CATOP:[crl]
+$     CREATE /DIRECTORY /PROTECTION=OWNER:RWED CATOP:[newcerts]
+$     CREATE /DIRECTORY /PROTECTION=OWNER:RWED CATOP:[private]
+$
+$     OPEN /WRITE ser_file CATOP:[000000]serial. 
+$     WRITE ser_file "01"
+$     CLOSE ser_file
+$     APPEND /NEW_VERSION NL: CATOP:[000000]index.txt
+$
+$     ! The following is to make sure access() doesn't get confused.  It
+$     ! really needs one file in the directory to give correct answers...
+$     COPY NLA0: CATOP:[certs].;
+$     COPY NLA0: CATOP:[crl].;
+$     COPY NLA0: CATOP:[newcerts].;
+$     COPY NLA0: CATOP:[private].;
+$   ENDIF
+$!
+$   IF F$SEARCH( CAKEY) .EQS. ""
+$   THEN
+$     READ '__INPUT' FILE -
+       /PROMPT="CA certificate filename (or enter to create): "
+$     IF (FILE .NES. "") .AND. (F$SEARCH(FILE) .NES. "")
+$     THEN
+$       COPY 'FILE' 'CAKEY'
+$       RET=$STATUS
+$     ELSE
+$       echo "Making CA certificate ..."
+$       DEFINE /USER_MODE SYS$INPUT '__INPUT'
+$       REQ -new -x509 -keyout 'CAKEY' -out 'CACERT' 'DAYS'
+$       RET=$STATUS
+$     ENDIF
+$   ENDIF
+$   GOTO opt_loop_continue
+$ ENDIF
+$!
+$ IF (prog_opt .EQS. "-pkcs12")
+$ THEN
+$   i = i + 1
+$   cname = P'i'
+$   IF cname .EQS. "" THEN cname = "My certificate"
+$   PKCS12 -in newcert.pem -inkey newreq.pem -certfile 'CACERT' -
+     -out newcert.p12 -export -name "''cname'"
+$   RET=$STATUS
+$   goto clean_up
+$ ENDIF
+$!
+$ IF (prog_opt .EQS. "-xsign")
+$ THEN
+$!
+$   DEFINE /USER_MODE SYS$INPUT '__INPUT'
+$   CA -policy policy_anything -infiles newreq.pem
+$   RET=$STATUS
+$   GOTO opt_loop_continue
+$ ENDIF
+$!
+$ IF ((prog_opt .EQS. "-sign") .OR. (prog_opt .EQS. "-signreq"))
+$ THEN
+$!   
+$   DEFINE /USER_MODE SYS$INPUT '__INPUT'
+$   CA -policy policy_anything -out newcert.pem -infiles newreq.pem
+$   RET=$STATUS
+$   type newcert.pem
+$   echo "Signed certificate is in newcert.pem"
+$   GOTO opt_loop_continue
+$ ENDIF
+$!
+$ IF (prog_opt .EQS. "-signcert")
+$  THEN
+$!   
+$   echo "Cert passphrase will be requested twice - bug?"
+$   DEFINE /USER_MODE SYS$INPUT '__INPUT'
+$   X509 -x509toreq -in newreq.pem -signkey newreq.pem -out tmp.pem
+$   DEFINE /USER_MODE SYS$INPUT '__INPUT'
+$   CA -policy policy_anything -out newcert.pem -infiles tmp.pem
+y
+y
+$   type newcert.pem
+$   echo "Signed certificate is in newcert.pem"
+$   GOTO opt_loop_continue
+$ ENDIF
+$!
+$ IF (prog_opt .EQS. "-verify")
+$ THEN
+$!   
+$   i = i + 1
+$   IF (p'i' .EQS. "")
+$   THEN
+$     DEFINE /USER_MODE SYS$INPUT '__INPUT'
+$     VERIFY "-CAfile" 'CACERT' newcert.pem
+$   ELSE
+$     j = i
+$    verify_opt_loop:
+$     IF j .GT. 8 THEN GOTO verify_opt_loop_end
+$     IF p'j' .NES. ""
+$     THEN 
+$       DEFINE /USER_MODE SYS$INPUT '__INPUT'
+$       __tmp = p'j'
+$       VERIFY "-CAfile" 'CACERT' '__tmp'
+$       tmp=$STATUS
+$       IF tmp .NE. 0 THEN RET=tmp
+$     ENDIF
+$     j = j + 1
+$     GOTO verify_opt_loop
+$    verify_opt_loop_end:
+$   ENDIF
+$   
+$   GOTO opt_loop_end
+$ ENDIF
+$!
+$ IF (prog_opt .NES. "")
+$ THEN
+$!   
+$   echo "Unknown argument ''prog_opt'"
+$   RET = 3
+$   goto clean_up
+$ ENDIF
+$
+$opt_loop_continue:
+$ i = i + 1
+$ GOTO opt_loop
+$
+$opt_loop_end:
+$!
+$clean_up:
+$!
+$ if f$trnlnm( "CATOP", "LNM$PROCESS") .nes. "" then -
+   deassign /process CATOP
+$!
+$ EXIT 'RET'

apps/CA.pl.in

@@ -1,189 +1,189 @@
-#!{- $config{perl} -}
+#!/usr/local/bin/perl
 #
-# Wrapper around the ca to make it easier to use
+# CA - wrapper around ca to make it easier to use ... basically ca requires
+#      some setup stuff to be done before you can use it and this makes
+#      things easier between now and when Eric is convinced to fix it :-)
+#
+# CA -newca ... will setup the right stuff
+# CA -newreq[-nodes] ... will generate a certificate request 
+# CA -sign ... will sign the generated request and output 
+#
+# At the end of that grab newreq.pem and newcert.pem (one has the key 
+# and the other the certificate) and cat them together and that is what
+# you want/need ... I'll make even this a little cleaner later.
+#
+#
+# 12-Jan-96 tjh    Added more things ... including CA -signcert which
+#                  converts a certificate to a request and then signs it.
+# 10-Jan-96 eay    Fixed a few more bugs and added the SSLEAY_CONFIG
+#		   environment variable so this can be driven from
+#		   a script.
+# 25-Jul-96 eay    Cleaned up filenames some more.
+# 11-Jun-96 eay    Fixed a few filename missmatches.
+# 03-May-96 eay    Modified to use 'ssleay cmd' instead of 'cmd'.
+# 18-Apr-96 tjh    Original hacking
+#
+# Tim Hudson
+# tjh@cryptsoft.com
 #
-# {- join("\n# ", @autowarntext) -}
 
-use strict;
-use warnings;
-
-my $openssl = "openssl";
-if(defined $ENV{'OPENSSL'}) {
-    $openssl = $ENV{'OPENSSL'};
-} else {
-    $ENV{'OPENSSL'} = $openssl;
-}
-
-my $verbose = 1;
-
-my $OPENSSL_CONFIG = $ENV{"OPENSSL_CONFIG"};
-my $DAYS = "-days 365";
-my $CADAYS = "-days 1095";	# 3 years
-my $REQ = "$openssl req $OPENSSL_CONFIG";
-my $CA = "$openssl ca $OPENSSL_CONFIG";
-my $VERIFY = "$openssl verify";
-my $X509 = "$openssl x509";
-my $PKCS12 = "$openssl pkcs12";
+# 27-Apr-98 snh    Translation into perl, fix existing CA bug.
+#
+#
+# Steve Henson
+# shenson@bigfoot.com
 
 # default openssl.cnf file has setup as per the following
-my $CATOP = "./demoCA";
-my $CAKEY = "cakey.pem";
-my $CAREQ = "careq.pem";
-my $CACERT = "cacert.pem";
-my $CACRL = "crl.pem";
-my $DIRMODE = 0777;
+# demoCA ... where everything is stored
 
-my $NEWKEY = "newkey.pem";
-my $NEWREQ = "newreq.pem";
-my $NEWCERT = "newcert.pem";
-my $NEWP12 = "newcert.p12";
-my $RET = 0;
-my $WHAT = shift @ARGV;
-my $FILE;
-
-# See if reason for a CRL entry is valid; exit if not.
-sub crl_reason_ok
-{
-    my $r = shift;
-
-    if ($r eq 'unspecified' || $r eq 'keyCompromise'
-        || $r eq 'CACompromise' || $r eq 'affiliationChanged'
-        || $r eq 'superseded' || $r eq 'cessationOfOperation'
-        || $r eq 'certificateHold' || $r eq 'removeFromCRL') {
-        return 1;
-    }
-    print STDERR "Invalid CRL reason; must be one of:\n";
-    print STDERR "    unspecified, keyCompromise, CACompromise,\n";
-    print STDERR "    affiliationChanged, superseded, cessationOfOperation\n";
-    print STDERR "    certificateHold, removeFromCRL";
-    exit 1;
-}
-
-# Copy a PEM-format file; return like exit status (zero means ok)
-sub copy_pemfile
-{
-    my ($infile, $outfile, $bound) = @_;
-    my $found = 0;
-
-    open IN, $infile || die "Cannot open $infile, $!";
-    open OUT, ">$outfile" || die "Cannot write to $outfile, $!";
-    while (<IN>) {
-        $found = 1 if /^-----BEGIN.*$bound/;
-        print OUT $_ if $found;
-        $found = 2, last if /^-----END.*$bound/;
-    }
-    close IN;
-    close OUT;
-    return $found == 2 ? 0 : 1;
-}
-
-# Wrapper around system; useful for debugging.  Returns just the exit status
-sub run
-{
-    my $cmd = shift;
-    print "====\n$cmd\n" if $verbose;
-    my $status = system($cmd);
-    print "==> $status\n====\n" if $verbose;
-    return $status >> 8;
-}
-
-
-if ( $WHAT =~ /^(-\?|-h|-help)$/ ) {
-    print STDERR "usage: CA -newcert|-newreq|-newreq-nodes|-newca|-sign|-verify\n";
-    print STDERR "       CA -pkcs12 [certname]\n";
-    print STDERR "       CA -crl|-revoke cert-filename [reason]\n";
-    exit 0;
-}
-if ($WHAT eq '-newcert' ) {
-    # create a certificate
-    $RET = run("$REQ -new -x509 -keyout $NEWKEY -out $NEWCERT $DAYS");
-    print "Cert is in $NEWCERT, private key is in $NEWKEY\n" if $RET == 0;
-} elsif ($WHAT eq '-newreq' ) {
-    # create a certificate request
-    $RET = run("$REQ -new -keyout $NEWKEY -out $NEWREQ $DAYS");
-    print "Request is in $NEWREQ, private key is in $NEWKEY\n" if $RET == 0;
-} elsif ($WHAT eq '-newreq-nodes' ) {
-    # create a certificate request
-    $RET = run("$REQ -new -nodes -keyout $NEWKEY -out $NEWREQ $DAYS");
-    print "Request is in $NEWREQ, private key is in $NEWKEY\n" if $RET == 0;
-} elsif ($WHAT eq '-newca' ) {
-    # create the directory hierarchy
-    mkdir ${CATOP}, $DIRMODE;
-    mkdir "${CATOP}/certs", $DIRMODE;
-    mkdir "${CATOP}/crl", $DIRMODE ;
-    mkdir "${CATOP}/newcerts", $DIRMODE;
-    mkdir "${CATOP}/private", $DIRMODE;
-    open OUT, ">${CATOP}/index.txt";
-    close OUT;
-    open OUT, ">${CATOP}/crlnumber";
-    print OUT "01\n";
-    close OUT;
-    # ask user for existing CA certificate
-    print "CA certificate filename (or enter to create)\n";
-    $FILE = "" unless defined($FILE = <STDIN>);
-    $FILE =~ s{\R$}{};
-    if ($FILE ne "") {
-        copy_pemfile($FILE,"${CATOP}/private/$CAKEY", "PRIVATE");
-        copy_pemfile($FILE,"${CATOP}/$CACERT", "CERTIFICATE");
-    } else {
-        print "Making CA certificate ...\n";
-        $RET = run("$REQ -new -keyout"
-                . " ${CATOP}/private/$CAKEY"
-                . " -out ${CATOP}/$CAREQ");
-        $RET = run("$CA -create_serial"
-                . " -out ${CATOP}/$CACERT $CADAYS -batch"
-                . " -keyfile ${CATOP}/private/$CAKEY -selfsign"
-                . " -extensions v3_ca"
-                . " -infiles ${CATOP}/$CAREQ") if $RET == 0;
-        print "CA certificate is in ${CATOP}/$CACERT\n" if $RET == 0;
-    }
-} elsif ($WHAT eq '-pkcs12' ) {
-    my $cname = $ARGV[1];
-    $cname = "My Certificate" unless defined $cname;
-    $RET = run("$PKCS12 -in $NEWCERT -inkey $NEWKEY"
-            . " -certfile ${CATOP}/$CACERT"
-            . " -out $NEWP12"
-            . " -export -name \"$cname\"");
-    print "PKCS #12 file is in $NEWP12\n" if $RET == 0;
-} elsif ($WHAT eq '-xsign' ) {
-    $RET = run("$CA -policy policy_anything -infiles $NEWREQ");
-} elsif ($WHAT eq '-sign' ) {
-    $RET = run("$CA -policy policy_anything -out $NEWCERT -infiles $NEWREQ");
-    print "Signed certificate is in $NEWCERT\n" if $RET == 0;
-} elsif ($WHAT eq '-signCA' ) {
-    $RET = run("$CA -policy policy_anything -out $NEWCERT"
-            . " -extensions v3_ca -infiles $NEWREQ");
-    print "Signed CA certificate is in $NEWCERT\n" if $RET == 0;
-} elsif ($WHAT eq '-signcert' ) {
-    $RET = run("$X509 -x509toreq -in $NEWREQ -signkey $NEWREQ"
-            . " -out tmp.pem");
-    $RET = run("$CA -policy policy_anything -out $NEWCERT"
-            . " -infiles tmp.pem") if $RET == 0;
-    print "Signed certificate is in $NEWCERT\n" if $RET == 0;
-} elsif ($WHAT eq '-verify' ) {
-    my @files = @ARGV ? @ARGV : ( $NEWCERT );
-    my $file;
-    foreach $file (@files) {
-        my $status = run("$VERIFY \"-CAfile\" ${CATOP}/$CACERT $file");
-        $RET = $status if $status != 0;
-    }
-} elsif ($WHAT eq '-crl' ) {
-    $RET = run("$CA -gencrl -out ${CATOP}/crl/$CACRL");
-    print "Generated CRL is in ${CATOP}/crl/$CACRL\n" if $RET == 0;
-} elsif ($WHAT eq '-revoke' ) {
-    my $cname = $ARGV[1];
-    if (!defined $cname) {
-        print "Certificate filename is required; reason optional.\n";
-        exit 1;
-    }
-    my $reason = $ARGV[2];
-    $reason = " -crl_reason $reason"
-        if defined $reason && crl_reason_ok($reason);
-    $RET = run("$CA -revoke \"$cname\"" . $reason);
+my $openssl;
+if(defined $ENV{OPENSSL}) {
+	$openssl = $ENV{OPENSSL};
 } else {
-    print STDERR "Unknown arg \"$WHAT\"\n";
-    print STDERR "Use -help for help.\n";
-    exit 1;
+	$openssl = "openssl";
+	$ENV{OPENSSL} = $openssl;
+}
+
+$SSLEAY_CONFIG=$ENV{"SSLEAY_CONFIG"};
+$DAYS="-days 365";	# 1 year
+$CADAYS="-days 1095";	# 3 years
+$REQ="$openssl req $SSLEAY_CONFIG";
+$CA="$openssl ca $SSLEAY_CONFIG";
+$VERIFY="$openssl verify";
+$X509="$openssl x509";
+$PKCS12="$openssl pkcs12";
+
+$CATOP="./demoCA";
+$CAKEY="cakey.pem";
+$CAREQ="careq.pem";
+$CACERT="cacert.pem";
+
+$DIRMODE = 0777;
+
+$RET = 0;
+
+foreach (@ARGV) {
+	if ( /^(-\?|-h|-help)$/ ) {
+	    print STDERR "usage: CA -newcert|-newreq|-newreq-nodes|-newca|-sign|-verify\n";
+	    exit 0;
+	} elsif (/^-newcert$/) {
+	    # create a certificate
+	    system ("$REQ -new -x509 -keyout newkey.pem -out newcert.pem $DAYS");
+	    $RET=$?;
+	    print "Certificate is in newcert.pem, private key is in newkey.pem\n"
+	} elsif (/^-newreq$/) {
+	    # create a certificate request
+	    system ("$REQ -new -keyout newkey.pem -out newreq.pem $DAYS");
+	    $RET=$?;
+	    print "Request is in newreq.pem, private key is in newkey.pem\n";
+	} elsif (/^-newreq-nodes$/) {
+	    # create a certificate request
+	    system ("$REQ -new -nodes -keyout newkey.pem -out newreq.pem $DAYS");
+	    $RET=$?;
+	    print "Request is in newreq.pem, private key is in newkey.pem\n";
+	} elsif (/^-newca$/) {
+		# if explicitly asked for or it doesn't exist then setup the
+		# directory structure that Eric likes to manage things 
+	    $NEW="1";
+	    if ( "$NEW" || ! -f "${CATOP}/serial" ) {
+		# create the directory hierarchy
+		mkdir $CATOP, $DIRMODE;
+		mkdir "${CATOP}/certs", $DIRMODE;
+		mkdir "${CATOP}/crl", $DIRMODE ;
+		mkdir "${CATOP}/newcerts", $DIRMODE;
+		mkdir "${CATOP}/private", $DIRMODE;
+		open OUT, ">${CATOP}/index.txt";
+		close OUT;
+		open OUT, ">${CATOP}/crlnumber";
+		print OUT "01\n";
+		close OUT;
+	    }
+	    if ( ! -f "${CATOP}/private/$CAKEY" ) {
+		print "CA certificate filename (or enter to create)\n";
+		$FILE = <STDIN>;
+
+		chop $FILE;
+
+		# ask user for existing CA certificate
+		if ($FILE) {
+		    cp_pem($FILE,"${CATOP}/private/$CAKEY", "PRIVATE");
+		    cp_pem($FILE,"${CATOP}/$CACERT", "CERTIFICATE");
+		    $RET=$?;
+		} else {
+		    print "Making CA certificate ...\n";
+		    system ("$REQ -new -keyout " .
+			"${CATOP}/private/$CAKEY -out ${CATOP}/$CAREQ");
+		    system ("$CA -create_serial " .
+			"-out ${CATOP}/$CACERT $CADAYS -batch " . 
+			"-keyfile ${CATOP}/private/$CAKEY -selfsign " .
+			"-extensions v3_ca " .
+			"-infiles ${CATOP}/$CAREQ ");
+		    $RET=$?;
+		}
+	    }
+	} elsif (/^-pkcs12$/) {
+	    my $cname = $ARGV[1];
+	    $cname = "My Certificate" unless defined $cname;
+	    system ("$PKCS12 -in newcert.pem -inkey newkey.pem " .
+			"-certfile ${CATOP}/$CACERT -out newcert.p12 " .
+			"-export -name \"$cname\"");
+	    $RET=$?;
+	    print "PKCS #12 file is in newcert.p12\n";
+	    exit $RET;
+	} elsif (/^-xsign$/) {
+	    system ("$CA -policy policy_anything -infiles newreq.pem");
+	    $RET=$?;
+	} elsif (/^(-sign|-signreq)$/) {
+	    system ("$CA -policy policy_anything -out newcert.pem " .
+							"-infiles newreq.pem");
+	    $RET=$?;
+	    print "Signed certificate is in newcert.pem\n";
+	} elsif (/^(-signCA)$/) {
+	    system ("$CA -policy policy_anything -out newcert.pem " .
+					"-extensions v3_ca -infiles newreq.pem");
+	    $RET=$?;
+	    print "Signed CA certificate is in newcert.pem\n";
+	} elsif (/^-signcert$/) {
+	    system ("$X509 -x509toreq -in newreq.pem -signkey newreq.pem " .
+								"-out tmp.pem");
+	    system ("$CA -policy policy_anything -out newcert.pem " .
+							"-infiles tmp.pem");
+	    $RET = $?;
+	    print "Signed certificate is in newcert.pem\n";
+	} elsif (/^-verify$/) {
+	    if (shift) {
+		foreach $j (@ARGV) {
+		    system ("$VERIFY -CAfile $CATOP/$CACERT $j");
+		    $RET=$? if ($? != 0);
+		}
+		exit $RET;
+	    } else {
+		    system ("$VERIFY -CAfile $CATOP/$CACERT newcert.pem");
+		    $RET=$?;
+	    	    exit 0;
+	    }
+	} else {
+	    print STDERR "Unknown arg $_\n";
+	    print STDERR "usage: CA -newcert|-newreq|-newreq-nodes|-newca|-sign|-verify\n";
+	    exit 1;
+	}
 }
 
 exit $RET;
+
+sub cp_pem {
+my ($infile, $outfile, $bound) = @_;
+open IN, $infile;
+open OUT, ">$outfile";
+my $flag = 0;
+while (<IN>) {
+	$flag = 1 if (/^-----BEGIN.*$bound/) ;
+	print OUT $_ if ($flag);
+	if (/^-----END.*$bound/) {
+		close IN;
+		close OUT;
+		return;
+	}
+}
+}
+

apps/CA.sh

@@ -0,0 +1,198 @@
+#!/bin/sh
+#
+# CA - wrapper around ca to make it easier to use ... basically ca requires
+#      some setup stuff to be done before you can use it and this makes
+#      things easier between now and when Eric is convinced to fix it :-)
+#
+# CA -newca ... will setup the right stuff
+# CA -newreq ... will generate a certificate request
+# CA -sign ... will sign the generated request and output
+#
+# At the end of that grab newreq.pem and newcert.pem (one has the key
+# and the other the certificate) and cat them together and that is what
+# you want/need ... I'll make even this a little cleaner later.
+#
+#
+# 12-Jan-96 tjh    Added more things ... including CA -signcert which
+#                  converts a certificate to a request and then signs it.
+# 10-Jan-96 eay    Fixed a few more bugs and added the SSLEAY_CONFIG
+#                  environment variable so this can be driven from
+#                  a script.
+# 25-Jul-96 eay    Cleaned up filenames some more.
+# 11-Jun-96 eay    Fixed a few filename missmatches.
+# 03-May-96 eay    Modified to use 'ssleay cmd' instead of 'cmd'.
+# 18-Apr-96 tjh    Original hacking
+#
+# Tim Hudson
+# tjh@cryptsoft.com
+#
+
+# default openssl.cnf file has setup as per the following
+# demoCA ... where everything is stored
+cp_pem() {
+    infile=$1
+    outfile=$2
+    bound=$3
+    flag=0
+    exec <$infile;
+    while read line; do
+	if [ $flag -eq 1 ]; then
+		echo $line|grep "^-----END.*$bound"  2>/dev/null 1>/dev/null
+		if [ $? -eq 0 ] ; then
+			echo $line >>$outfile
+			break
+		else
+			echo $line >>$outfile
+		fi
+	fi
+
+	echo $line|grep "^-----BEGIN.*$bound"  2>/dev/null 1>/dev/null
+	if [ $? -eq 0 ]; then
+		echo $line >$outfile
+		flag=1
+	fi
+    done
+}
+
+usage() {
+ echo "usage: $0 -newcert|-newreq|-newreq-nodes|-newca|-sign|-verify" >&2
+}
+
+if [ -z "$OPENSSL" ]; then OPENSSL=openssl; fi
+
+if [ -z "$DAYS" ] ; then DAYS="-days 365" ; fi	# 1 year
+CADAYS="-days 1095"	# 3 years
+REQ="$OPENSSL req $SSLEAY_CONFIG"
+CA="$OPENSSL ca $SSLEAY_CONFIG"
+VERIFY="$OPENSSL verify"
+X509="$OPENSSL x509"
+PKCS12="openssl pkcs12"
+
+if [ -z "$CATOP" ] ; then CATOP=./demoCA ; fi
+CAKEY=./cakey.pem
+CAREQ=./careq.pem
+CACERT=./cacert.pem
+
+RET=0
+
+while [ "$1" != "" ] ; do
+case $1 in
+-\?|-h|-help)
+    usage
+    exit 0
+    ;;
+-newcert)
+    # create a certificate
+    $REQ -new -x509 -keyout newkey.pem -out newcert.pem $DAYS
+    RET=$?
+    echo "Certificate is in newcert.pem, private key is in newkey.pem"
+    ;;
+-newreq)
+    # create a certificate request
+    $REQ -new -keyout newkey.pem -out newreq.pem $DAYS
+    RET=$?
+    echo "Request is in newreq.pem, private key is in newkey.pem"
+    ;;
+-newreq-nodes) 
+    # create a certificate request
+    $REQ -new -nodes -keyout newreq.pem -out newreq.pem $DAYS
+    RET=$?
+    echo "Request (and private key) is in newreq.pem"
+    ;;
+-newca)
+    # if explicitly asked for or it doesn't exist then setup the directory
+    # structure that Eric likes to manage things
+    NEW="1"
+    if [ "$NEW" -o ! -f ${CATOP}/serial ]; then
+	# create the directory hierarchy
+	mkdir -p ${CATOP}
+	mkdir -p ${CATOP}/certs
+	mkdir -p ${CATOP}/crl
+	mkdir -p ${CATOP}/newcerts
+	mkdir -p ${CATOP}/private
+	touch ${CATOP}/index.txt
+    fi
+    if [ ! -f ${CATOP}/private/$CAKEY ]; then
+	echo "CA certificate filename (or enter to create)"
+	read FILE
+
+	# ask user for existing CA certificate
+	if [ "$FILE" ]; then
+	    cp_pem $FILE ${CATOP}/private/$CAKEY PRIVATE
+	    cp_pem $FILE ${CATOP}/$CACERT CERTIFICATE
+	    RET=$?
+	    if [ ! -f "${CATOP}/serial" ]; then
+		$X509 -in ${CATOP}/$CACERT -noout -next_serial \
+		      -out ${CATOP}/serial
+	    fi
+	else
+	    echo "Making CA certificate ..."
+	    $REQ -new -keyout ${CATOP}/private/$CAKEY \
+			   -out ${CATOP}/$CAREQ
+	    $CA -create_serial -out ${CATOP}/$CACERT $CADAYS -batch \
+			   -keyfile ${CATOP}/private/$CAKEY -selfsign \
+			   -extensions v3_ca \
+			   -infiles ${CATOP}/$CAREQ
+	    RET=$?
+	fi
+    fi
+    ;;
+-xsign)
+    $CA -policy policy_anything -infiles newreq.pem
+    RET=$?
+    ;;
+-pkcs12)
+    if [ -z "$2" ] ; then
+	CNAME="My Certificate"
+    else
+	CNAME="$2"
+    fi
+    $PKCS12 -in newcert.pem -inkey newreq.pem -certfile ${CATOP}/$CACERT \
+	    -out newcert.p12 -export -name "$CNAME"
+    RET=$?
+    exit $RET
+    ;;
+-sign|-signreq)
+    $CA -policy policy_anything -out newcert.pem -infiles newreq.pem
+    RET=$?
+    cat newcert.pem
+    echo "Signed certificate is in newcert.pem"
+    ;;
+-signCA)
+    $CA -policy policy_anything -out newcert.pem -extensions v3_ca -infiles newreq.pem
+    RET=$?
+    echo "Signed CA certificate is in newcert.pem"
+    ;;
+-signcert)
+    echo "Cert passphrase will be requested twice - bug?"
+    $X509 -x509toreq -in newreq.pem -signkey newreq.pem -out tmp.pem
+    $CA -policy policy_anything -out newcert.pem -infiles tmp.pem
+    RET=$?
+    cat newcert.pem
+    echo "Signed certificate is in newcert.pem"
+    ;;
+-verify)
+    shift
+    if [ -z "$1" ]; then
+	    $VERIFY -CAfile $CATOP/$CACERT newcert.pem
+	    RET=$?
+    else
+	for j
+	do
+	    $VERIFY -CAfile $CATOP/$CACERT $j
+	    if [ $? != 0 ]; then
+		    RET=$?
+	    fi
+	done
+    fi
+    exit $RET
+    ;;
+*)
+    echo "Unknown arg $i" >&2
+    usage
+    exit 1
+    ;;
+esac
+shift
+done
+exit $RET

apps/Makefile.in

@@ -1,147 +0,0 @@
-#
-#  apps/Makefile
-#
-
-DIR=		apps
-TOP=		..
-CC=		cc
-INCLUDES=	-I$(TOP) -I../crypto -I../include
-CFLAG=		-g -static -Wswitch
-MAKEFILE=	Makefile
-PERL=		perl
-RM=		rm -f
-
-PLIB_LDFLAG=
-EX_LIBS= 
-EXE_EXT= 
-
-SHLIB_TARGET=
-
-CFLAGS= $(INCLUDES) $(CFLAG)
-
-GENERAL=Makefile makeapps.com install.com
-
-DLIBCRYPTO=../libcrypto.a
-DLIBSSL=../libssl.a
-LIBCRYPTO=-L.. -lcrypto
-LIBSSL=-L.. -lssl
-
-SCRIPTS=CA.pl tsget
-EXE= openssl$(EXE_EXT)
-
-COMMANDS= \
-	asn1pars.o ca.o ciphers.o cms.o crl.o crl2p7.o dgst.o dhparam.o \
-	dsa.o dsaparam.o ec.o ecparam.o enc.o engine.o errstr.o gendsa.o \
-	genpkey.o genrsa.o nseq.o ocsp.o passwd.o pkcs12.o pkcs7.o pkcs8.o \
-	pkey.o pkeyparam.o pkeyutl.o prime.o rand.o req.o rsa.o rsautl.o \
-	s_client.o s_server.o s_time.o sess_id.o smime.o speed.o spkac.o \
-	srp.o ts.o verify.o version.o x509.o rehash.o
-
-EXTRA_OBJ=apps.o opt.o s_cb.o s_socket.o
-EXTRA_SRC=apps.c opt.c s_cb.c s_socket.c
-RAND_OBJ=app_rand.o
-RAND_SRC=app_rand.c
-
-OBJ	= $(COMMANDS)
-
-SRC	= \
-	asn1pars.c ca.c ciphers.c cms.c crl.c crl2p7.c dgst.c dhparam.c \
-	dsa.c dsaparam.c ec.c ecparam.c enc.c engine.c errstr.c gendsa.c \
-	genpkey.c genrsa.c nseq.c ocsp.c passwd.c pkcs12.c pkcs7.c pkcs8.c \
-	pkey.c pkeyparam.c pkeyutl.c prime.c rand.c req.c rsa.c rsautl.c \
-	s_client.c s_server.c s_time.c sess_id.c smime.c speed.c spkac.c \
-	srp.c ts.c verify.c version.c x509.c rehash.c
-
-EXE_OBJ	= openssl.o $(OBJ) $(EXTRA_OBJ) $(RAND_OBJ)
-EXE_SRC = openssl.c $(SRC) $(EXTRA_SRC) $(RAND_SRC)
-
-HEADER=	apps.h progs.h s_apps.h \
-	testdsa.h testrsa.h timeouts.h
-
-ALL=    $(GENERAL) $(EXE_SRC) $(HEADER)
-
-top:
-	@(cd ..; $(MAKE) DIRS=$(DIR) all)
-
-all:	exe scripts
-
-exe:	$(EXE)
-
-scripts: $(SCRIPTS)
-
-openssl-vms.cnf: openssl.cnf
-	$(PERL) $(TOP)/VMS/VMSify-conf.pl < openssl.cnf > openssl-vms.cnf
-
-files:
-	$(PERL) $(TOP)/util/files.pl Makefile >> $(TOP)/MINFO
-
-install:
-	@[ -n "$(INSTALLTOP)" ] # should be set by top Makefile...
-	@set -e; for i in $(EXE); \
-	do  \
-	(echo installing $$i; \
-	 cp $$i $(DESTDIR)$(INSTALLTOP)/bin/$$i.new; \
-	 chmod 755 $(DESTDIR)$(INSTALLTOP)/bin/$$i.new; \
-	 mv -f $(DESTDIR)$(INSTALLTOP)/bin/$$i.new $(DESTDIR)$(INSTALLTOP)/bin/$$i ); \
-	 done;
-	@set -e; for i in $(SCRIPTS); \
-	do  \
-	(echo installing $$i; \
-	 cp $$i $(DESTDIR)$(OPENSSLDIR)/misc/$$i.new; \
-	 chmod 755 $(DESTDIR)$(OPENSSLDIR)/misc/$$i.new; \
-	 mv -f $(DESTDIR)$(OPENSSLDIR)/misc/$$i.new $(DESTDIR)$(OPENSSLDIR)/misc/$$i ); \
-	 done
-	@cp openssl.cnf $(DESTDIR)$(OPENSSLDIR)/openssl.cnf.new; \
-	chmod 644 $(DESTDIR)$(OPENSSLDIR)/openssl.cnf.new; \
-	mv -f  $(DESTDIR)$(OPENSSLDIR)/openssl.cnf.new $(DESTDIR)$(OPENSSLDIR)/openssl.cnf
-
-uninstall:
-	@set -e; for i in $(EXE); \
-	do  \
-		echo $(RM) $(DESTDIR)$(INSTALLTOP)/bin/$$i; \
-		$(RM) $(DESTDIR)$(INSTALLTOP)/bin/$$i; \
-	done;
-	@set -e; for i in $(SCRIPTS); \
-	do  \
-		echo $(RM) $(DESTDIR)$(OPENSSLDIR)/misc/$$i; \
-		$(RM) $(DESTDIR)$(OPENSSLDIR)/misc/$$i; \
-	done
-	$(RM) $(DESTDIR)$(OPENSSLDIR)/openssl.cnf
-
-generate: openssl-vms.cnf progs.h
-
-depend:
-	$(TOP)/util/domd $(CFLAG) $(INCLUDES) $(DEPFLAG) -- $(EXE_SRC)
-
-clean:
-	rm -f *.o *.obj *.dll lib tags core .pure .nfs* *.old *.bak fluff $(EXE)
-	rm -f req
-
-$(DLIBSSL):
-	(cd ..; $(MAKE) build_libssl)
-
-$(DLIBCRYPTO):
-	(cd ..; $(MAKE) build_libcrypto)
-
-$(EXE): $(EXE_OBJ) $(DLIBCRYPTO) $(DLIBSSL)
-	$(RM) $(EXE)
-	shlib_target=; if [ -n "$(SHARED_LIBS)" ]; then \
-		shlib_target="$(SHLIB_TARGET)"; \
-	fi; \
-	LIBRARIES="$(LIBSSL) $(LIBCRYPTO)" ; \
-	$(MAKE) -f $(TOP)/Makefile.shared -e \
-		APPNAME=$(EXE) OBJECTS="$(EXE_OBJ)" \
-		LDFLAG="$(LDFLAG)" \
-		LIBDEPS="$(PLIB_LDFLAG) $$LIBRARIES $(EX_LIBS)" \
-		link_app.$${shlib_target}
-
-progs.h: progs.pl Makefile.in
-	$(RM) progs.h
-	$(PERL) progs.pl $(EXE_SRC) > progs.h
-
-CA.pl: CA.pl.in
-	$(PERL) -I$(TOP) -Mconfigdata $(TOP)/util/dofile.pl -oapps/Makefile CA.pl.in > CA.pl.new
-	mv CA.pl.new CA.pl
-
-
-# DO NOT DELETE THIS LINE -- make depend depends on it.

apps/app_rand.c

@@ -1,3 +1,4 @@
+/* apps/app_rand.c */
 /* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
  * All rights reserved.
  *
@@ -108,25 +109,29 @@
  *
  */
 
+#define NON_MAIN
 #include "apps.h"
+#undef NON_MAIN
 #include <openssl/bio.h>
 #include <openssl/rand.h>
 
 static int seeded = 0;
 static int egdsocket = 0;
 
-int app_RAND_load_file(const char *file, int dont_warn)
+int app_RAND_load_file(const char *file, BIO *bio_e, int dont_warn)
 {
     int consider_randfile = (file == NULL);
     char buffer[200];
 
 #ifdef OPENSSL_SYS_WINDOWS
+    BIO_printf(bio_e, "Loading 'screen' into random state -");
+    BIO_flush(bio_e);
     RAND_screen();
+    BIO_printf(bio_e, " done\n");
 #endif
 
     if (file == NULL)
         file = RAND_file_name(buffer, sizeof buffer);
-#ifndef OPENSSL_NO_EGD
     else if (RAND_egd(file) > 0) {
         /*
          * we try if the given filename is an EGD socket. if it is, we don't
@@ -135,19 +140,18 @@ int app_RAND_load_file(const char *file, int dont_warn)
         egdsocket = 1;
         return 1;
     }
-#endif
     if (file == NULL || !RAND_load_file(file, -1)) {
         if (RAND_status() == 0) {
             if (!dont_warn) {
-                BIO_printf(bio_err, "unable to load 'random state'\n");
-                BIO_printf(bio_err,
+                BIO_printf(bio_e, "unable to load 'random state'\n");
+                BIO_printf(bio_e,
                            "This means that the random number generator has not been seeded\n");
-                BIO_printf(bio_err, "with much random data.\n");
+                BIO_printf(bio_e, "with much random data.\n");
                 if (consider_randfile) { /* explanation does not apply when a
                                           * file is explicitly named */
-                    BIO_printf(bio_err,
+                    BIO_printf(bio_e,
                                "Consider setting the RANDFILE environment variable to point at a file that\n");
-                    BIO_printf(bio_err,
+                    BIO_printf(bio_e,
                                "'random' data can be kept in (the file will be overwritten).\n");
                 }
             }
@@ -163,9 +167,7 @@ long app_RAND_load_files(char *name)
     char *p, *n;
     int last;
     long tot = 0;
-#ifndef OPENSSL_NO_EGD
     int egd;
-#endif
 
     for (;;) {
         last = 0;
@@ -178,12 +180,10 @@ long app_RAND_load_files(char *name)
         if (*n == '\0')
             break;
 
-#ifndef OPENSSL_NO_EGD
         egd = RAND_egd(n);
         if (egd > 0)
             tot += egd;
         else
-#endif
             tot += RAND_load_file(n, -1);
         if (last)
             break;
@@ -193,7 +193,7 @@ long app_RAND_load_files(char *name)
     return (tot);
 }
 
-int app_RAND_write_file(const char *file)
+int app_RAND_write_file(const char *file, BIO *bio_e)
 {
     char buffer[200];
 
@@ -208,7 +208,7 @@ int app_RAND_write_file(const char *file)
     if (file == NULL)
         file = RAND_file_name(buffer, sizeof buffer);
     if (file == NULL || !RAND_write_file(file)) {
-        BIO_printf(bio_err, "unable to write 'random state'\n");
+        BIO_printf(bio_e, "unable to write 'random state'\n");
         return 0;
     }
     return 1;

apps/apps.h

@@ -1,3 +1,4 @@
+/* apps/apps.h */
 /* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
  * All rights reserved.
  *
@@ -112,10 +113,7 @@
 # define HEADER_APPS_H
 
 # include "e_os.h"
-# include <assert.h>
 
-# include <openssl/e_os2.h>
-# include <openssl/ossl_typ.h>
 # include <openssl/bio.h>
 # include <openssl/x509.h>
 # include <openssl/lhash.h>
@@ -128,36 +126,9 @@
 #  include <openssl/ocsp.h>
 # endif
 # include <openssl/ossl_typ.h>
-# ifndef OPENSSL_SYS_NETWARE
-#  include <signal.h>
-# endif
 
-# if defined(OPENSSL_SYS_WIN32) || defined(OPENSSL_SYS_WINCE)
-#  define openssl_fdset(a,b) FD_SET((unsigned int)a, b)
-# else
-#  define openssl_fdset(a,b) FD_SET(a, b)
-# endif
-
-# if defined(__STDC_VERSION__) && __STDC_VERSION__ >= 199901L && \
-     defined(INTMAX_MAX) && defined(UINTMAX_MAX)
-int opt_imax(const char *value, intmax_t *result);
-int opt_umax(const char *value, uintmax_t *result);
-# else
-#  define opt_imax opt_long
-#  define opt_umax opt_ulong
-#  define intmax_t long
-#  define uintmax_t unsigned long
-# endif
-
-/*
- * quick macro when you need to pass an unsigned char instead of a char.
- * this is true for some implementations of the is*() functions, for
- * example.
- */
-#define _UC(c) ((unsigned char)(c))
-
-int app_RAND_load_file(const char *file, int dont_warn);
-int app_RAND_write_file(const char *file);
+int app_RAND_load_file(const char *file, BIO *bio_e, int dont_warn);
+int app_RAND_write_file(const char *file, BIO *bio_e);
 /*
  * When `file' is NULL, use defaults. `bio_e' is for error messages.
  */
@@ -167,294 +138,80 @@ long app_RAND_load_files(char *file); /* `file' is a list of files to read,
                                        * (see e_os.h).  The string is
                                        * destroyed! */
 
-extern char *default_config_file;
-extern BIO *bio_in;
-extern BIO *bio_out;
+# ifndef MONOLITH
+
+#  define MAIN(a,v)       main(a,v)
+
+#  ifndef NON_MAIN
+CONF *config = NULL;
+BIO *bio_err = NULL;
+#  else
+extern CONF *config;
 extern BIO *bio_err;
-BIO *dup_bio_in(int format);
-BIO *dup_bio_out(int format);
-BIO *bio_open_owner(const char *filename, int format, int private);
-BIO *bio_open_default(const char *filename, char mode, int format);
-BIO *bio_open_default_quiet(const char *filename, char mode, int format);
-CONF *app_load_config(const char *filename);
-CONF *app_load_config_quiet(const char *filename);
-int app_load_modules(const CONF *config);
-void unbuffer(FILE *fp);
-void wait_for_async(SSL *s);
+#  endif
 
-/*
- * Common verification options.
- */
-# define OPT_V_ENUM \
-        OPT_V__FIRST=2000, \
-        OPT_V_POLICY, OPT_V_PURPOSE, OPT_V_VERIFY_NAME, OPT_V_VERIFY_DEPTH, \
-        OPT_V_ATTIME, OPT_V_VERIFY_HOSTNAME, OPT_V_VERIFY_EMAIL, \
-        OPT_V_VERIFY_IP, OPT_V_IGNORE_CRITICAL, OPT_V_ISSUER_CHECKS, \
-        OPT_V_CRL_CHECK, OPT_V_CRL_CHECK_ALL, OPT_V_POLICY_CHECK, \
-        OPT_V_EXPLICIT_POLICY, OPT_V_INHIBIT_ANY, OPT_V_INHIBIT_MAP, \
-        OPT_V_X509_STRICT, OPT_V_EXTENDED_CRL, OPT_V_USE_DELTAS, \
-        OPT_V_POLICY_PRINT, OPT_V_CHECK_SS_SIG, OPT_V_TRUSTED_FIRST, \
-        OPT_V_SUITEB_128_ONLY, OPT_V_SUITEB_128, OPT_V_SUITEB_192, \
-        OPT_V_PARTIAL_CHAIN, OPT_V_NO_ALT_CHAINS, OPT_V_NO_CHECK_TIME, \
-        OPT_V__LAST
+# else
 
-# define OPT_V_OPTIONS \
-        { "policy", OPT_V_POLICY, 's', "adds policy to the acceptable policy set"}, \
-        { "purpose", OPT_V_PURPOSE, 's', \
-            "certificate chain purpose"}, \
-        { "verify_name", OPT_V_VERIFY_NAME, 's', "verification policy name"}, \
-        { "verify_depth", OPT_V_VERIFY_DEPTH, 'p', \
-            "chain depth limit"}, \
-        { "attime", OPT_V_ATTIME, 'M', "verification epoch time" }, \
-        { "verify_hostname", OPT_V_VERIFY_HOSTNAME, 's', \
-            "expected peer hostname" }, \
-        { "verify_email", OPT_V_VERIFY_EMAIL, 's', \
-            "expected peer email" }, \
-        { "verify_ip", OPT_V_VERIFY_IP, 's', \
-            "expected peer IP address" }, \
-        { "ignore_critical", OPT_V_IGNORE_CRITICAL, '-', \
-            "permit unhandled critical extensions"}, \
-        { "issuer_checks", OPT_V_ISSUER_CHECKS, '-', "(deprecated)"}, \
-        { "crl_check", OPT_V_CRL_CHECK, '-', "check leaf certificate revocation" }, \
-        { "crl_check_all", OPT_V_CRL_CHECK_ALL, '-', "check full chain revocation" }, \
-        { "policy_check", OPT_V_POLICY_CHECK, '-', "perform rfc5280 policy checks"}, \
-        { "explicit_policy", OPT_V_EXPLICIT_POLICY, '-', \
-            "set policy variable require-explicit-policy"}, \
-        { "inhibit_any", OPT_V_INHIBIT_ANY, '-', \
-            "set policy variable inihibit-any-policy"}, \
-        { "inhibit_map", OPT_V_INHIBIT_MAP, '-', \
-            "set policy variable inihibit-policy-mapping"}, \
-        { "x509_strict", OPT_V_X509_STRICT, '-', \
-            "disable certificate compatibility work-arounds"}, \
-        { "extended_crl", OPT_V_EXTENDED_CRL, '-', \
-            "enable extended CRL features"}, \
-        { "use_deltas", OPT_V_USE_DELTAS, '-', \
-            "use delta CRLs"}, \
-        { "policy_print", OPT_V_POLICY_PRINT, '-', \
-            "print policy processing diagnostics"}, \
-        { "check_ss_sig", OPT_V_CHECK_SS_SIG, '-', \
-            "check root CA self-signatures"}, \
-        { "trusted_first", OPT_V_TRUSTED_FIRST, '-', \
-            "search trust store first (default)" }, \
-        { "suiteB_128_only", OPT_V_SUITEB_128_ONLY, '-', "Suite B 128-bit-only mode"}, \
-        { "suiteB_128", OPT_V_SUITEB_128, '-', \
-            "Suite B 128-bit mode allowing 192-bit algorithms"}, \
-        { "suiteB_192", OPT_V_SUITEB_192, '-', "Suite B 192-bit-only mode" }, \
-        { "partial_chain", OPT_V_PARTIAL_CHAIN, '-', \
-            "accept chains anchored by intermediate trust-store CAs"}, \
-        { "no_alt_chains", OPT_V_NO_ALT_CHAINS, '-', "(deprecated)" }, \
-        { "no_check_time", OPT_V_NO_CHECK_TIME, '-', "ignore certificate validity time" }
+#  define MAIN(a,v)       PROG(a,v)
+extern CONF *config;
+extern char *default_config_file;
+extern BIO *bio_err;
 
-# define OPT_V_CASES \
-        OPT_V__FIRST: case OPT_V__LAST: break; \
-        case OPT_V_POLICY: \
-        case OPT_V_PURPOSE: \
-        case OPT_V_VERIFY_NAME: \
-        case OPT_V_VERIFY_DEPTH: \
-        case OPT_V_ATTIME: \
-        case OPT_V_VERIFY_HOSTNAME: \
-        case OPT_V_VERIFY_EMAIL: \
-        case OPT_V_VERIFY_IP: \
-        case OPT_V_IGNORE_CRITICAL: \
-        case OPT_V_ISSUER_CHECKS: \
-        case OPT_V_CRL_CHECK: \
-        case OPT_V_CRL_CHECK_ALL: \
-        case OPT_V_POLICY_CHECK: \
-        case OPT_V_EXPLICIT_POLICY: \
-        case OPT_V_INHIBIT_ANY: \
-        case OPT_V_INHIBIT_MAP: \
-        case OPT_V_X509_STRICT: \
-        case OPT_V_EXTENDED_CRL: \
-        case OPT_V_USE_DELTAS: \
-        case OPT_V_POLICY_PRINT: \
-        case OPT_V_CHECK_SS_SIG: \
-        case OPT_V_TRUSTED_FIRST: \
-        case OPT_V_SUITEB_128_ONLY: \
-        case OPT_V_SUITEB_128: \
-        case OPT_V_SUITEB_192: \
-        case OPT_V_PARTIAL_CHAIN: \
-        case OPT_V_NO_ALT_CHAINS: \
-        case OPT_V_NO_CHECK_TIME
+# endif
 
-/*
- * Common "extended"? options.
- */
-# define OPT_X_ENUM \
-        OPT_X__FIRST=1000, \
-        OPT_X_KEY, OPT_X_CERT, OPT_X_CHAIN, OPT_X_CHAIN_BUILD, \
-        OPT_X_CERTFORM, OPT_X_KEYFORM, \
-        OPT_X__LAST
+# ifndef OPENSSL_SYS_NETWARE
+#  include <signal.h>
+# endif
 
-# define OPT_X_OPTIONS \
-        { "xkey", OPT_X_KEY, '<', "key for Extended certificates"}, \
-        { "xcert", OPT_X_CERT, '<', "cert for Extended certificates"}, \
-        { "xchain", OPT_X_CHAIN, '<', "chain for Extended certificates"}, \
-        { "xchain_build", OPT_X_CHAIN_BUILD, '-', \
-            "build certificate chain for the extended certificates"}, \
-        { "xcertform", OPT_X_CERTFORM, 'F', \
-            "format of Extended certificate (PEM or DER) PEM default " }, \
-        { "xkeyform", OPT_X_KEYFORM, 'F', \
-            "format of Exnteded certificate's key (PEM or DER) PEM default"}
+# ifdef SIGPIPE
+#  define do_pipe_sig()   signal(SIGPIPE,SIG_IGN)
+# else
+#  define do_pipe_sig()
+# endif
 
-# define OPT_X_CASES \
-        OPT_X__FIRST: case OPT_X__LAST: break; \
-        case OPT_X_KEY: \
-        case OPT_X_CERT: \
-        case OPT_X_CHAIN: \
-        case OPT_X_CHAIN_BUILD: \
-        case OPT_X_CERTFORM: \
-        case OPT_X_KEYFORM
+# ifdef OPENSSL_NO_COMP
+#  define zlib_cleanup()
+# else
+#  define zlib_cleanup() COMP_zlib_cleanup()
+# endif
 
-/*
- * Common SSL options.
- * Any changes here must be coordinated with ../ssl/ssl_conf.c
- */
-# define OPT_S_ENUM \
-        OPT_S__FIRST=3000, \
-        OPT_S_NOSSL3, OPT_S_NOTLS1, OPT_S_NOTLS1_1, OPT_S_NOTLS1_2, \
-        OPT_S_BUGS, OPT_S_NO_COMP, OPT_S_NOTICKET, \
-        OPT_S_SERVERPREF, OPT_S_LEGACYRENEG, OPT_S_LEGACYCONN, \
-        OPT_S_ONRESUMP, OPT_S_NOLEGACYCONN, OPT_S_STRICT, OPT_S_SIGALGS, \
-        OPT_S_CLIENTSIGALGS, OPT_S_CURVES, OPT_S_NAMEDCURVE, OPT_S_CIPHER, \
-        OPT_S_DHPARAM, OPT_S_DEBUGBROKE, OPT_S_COMP, \
-        OPT_S__LAST
+# if defined(MONOLITH) && !defined(OPENSSL_C)
+#  define apps_startup() \
+                do_pipe_sig()
+#  define apps_shutdown()
+# else
+#  ifndef OPENSSL_NO_ENGINE
+#   define apps_startup() \
+                        do { do_pipe_sig(); CRYPTO_malloc_init(); \
+                        ERR_load_crypto_strings(); OpenSSL_add_all_algorithms(); \
+                        ENGINE_load_builtin_engines(); setup_ui_method(); } while(0)
+#   define apps_shutdown() \
+                        do { CONF_modules_unload(1); destroy_ui_method(); \
+                        OBJ_cleanup(); EVP_cleanup(); ENGINE_cleanup(); \
+                        CRYPTO_cleanup_all_ex_data(); ERR_remove_thread_state(NULL); \
+                        ERR_free_strings(); zlib_cleanup();} while(0)
+#  else
+#   define apps_startup() \
+                        do { do_pipe_sig(); CRYPTO_malloc_init(); \
+                        ERR_load_crypto_strings(); OpenSSL_add_all_algorithms(); \
+                        setup_ui_method(); } while(0)
+#   define apps_shutdown() \
+                        do { CONF_modules_unload(1); destroy_ui_method(); \
+                        OBJ_cleanup(); EVP_cleanup(); \
+                        CRYPTO_cleanup_all_ex_data(); ERR_remove_thread_state(NULL); \
+                        ERR_free_strings(); zlib_cleanup(); } while(0)
+#  endif
+# endif
 
-# define OPT_S_OPTIONS \
-        {"no_ssl3", OPT_S_NOSSL3, '-',"Just disable SSLv3" }, \
-        {"no_tls1", OPT_S_NOTLS1, '-', "Just disable TLSv1"}, \
-        {"no_tls1_1", OPT_S_NOTLS1_1, '-', "Just disable TLSv1.1" }, \
-        {"no_tls1_2", OPT_S_NOTLS1_2, '-', "Just disable TLSv1.2"}, \
-        {"bugs", OPT_S_BUGS, '-', "Turn on SSL bug compatibility"}, \
-        {"no_comp", OPT_S_NO_COMP, '-', "Disable SSL/TLS compression (default)" }, \
-        {"comp", OPT_S_COMP, '-', "Use SSL/TLS-level compression" }, \
-        {"no_ticket", OPT_S_NOTICKET, '-', \
-            "Disable use of TLS session tickets"}, \
-        {"serverpref", OPT_S_SERVERPREF, '-', "Use server's cipher preferences"}, \
-        {"legacy_renegotiation", OPT_S_LEGACYRENEG, '-', \
-            "Enable use of legacy renegotiation (dangerous)"}, \
-        {"legacy_server_connect", OPT_S_LEGACYCONN, '-', \
-            "Allow initial connection to servers that don't support RI"}, \
-        {"no_resumption_on_reneg", OPT_S_ONRESUMP, '-', \
-            "Disallow session resumption on renegotiation"}, \
-        {"no_legacy_server_connect", OPT_S_NOLEGACYCONN, '-', \
-            "Disallow initial connection to servers that don't support RI"}, \
-        {"strict", OPT_S_STRICT, '-', \
-            "Enforce strict certificate checks as per TLS standard"}, \
-        {"sigalgs", OPT_S_SIGALGS, 's', \
-            "Signature algorithms to support (colon-separated list)" }, \
-        {"client_sigalgs", OPT_S_CLIENTSIGALGS, 's', \
-            "Signature algorithms to support for client certificate" \
-            " authentication (colon-separated list)" }, \
-        {"curves", OPT_S_CURVES, 's', \
-            "Elliptic curves to advertise (colon-separated list)" }, \
-        {"named_curve", OPT_S_NAMEDCURVE, 's', \
-            "Elliptic curve used for ECDHE (server-side only)" }, \
-        {"cipher", OPT_S_CIPHER, 's', "Specify cipher list to be used"}, \
-        {"dhparam", OPT_S_DHPARAM, '<', \
-            "DH parameter file to use, in cert file if not specified"}, \
-        {"debug_broken_protocol", OPT_S_DEBUGBROKE, '-', \
-            "Perform all sorts of protocol violations for testing purposes"}
-
-# define OPT_S_CASES \
-        OPT_S__FIRST: case OPT_S__LAST: break; \
-        case OPT_S_NOSSL3: \
-        case OPT_S_NOTLS1: \
-        case OPT_S_NOTLS1_1: \
-        case OPT_S_NOTLS1_2: \
-        case OPT_S_BUGS: \
-        case OPT_S_NO_COMP: \
-        case OPT_S_COMP: \
-        case OPT_S_NOTICKET: \
-        case OPT_S_SERVERPREF: \
-        case OPT_S_LEGACYRENEG: \
-        case OPT_S_LEGACYCONN: \
-        case OPT_S_ONRESUMP: \
-        case OPT_S_NOLEGACYCONN: \
-        case OPT_S_STRICT: \
-        case OPT_S_SIGALGS: \
-        case OPT_S_CLIENTSIGALGS: \
-        case OPT_S_CURVES: \
-        case OPT_S_NAMEDCURVE: \
-        case OPT_S_CIPHER: \
-        case OPT_S_DHPARAM: \
-        case OPT_S_DEBUGBROKE
-
-/*
- * Option parsing.
- */
-extern const char OPT_HELP_STR[];
-extern const char OPT_MORE_STR[];
-typedef struct options_st {
-    const char *name;
-    int retval;
-    /*
-     * value type: - no value (also the value zero), n number, p positive
-     * number, u unsigned, l long, s string, < input file, > output file,
-     * f any format, F der/pem format , E der/pem/engine format identifier.
-     * l, n and u include zero; p does not.
-     */
-    int valtype;
-    const char *helpstr;
-} OPTIONS;
-
-/*
- * A string/int pairing; widely use for option value lookup, hence the
- * name OPT_PAIR. But that name is misleading in s_cb.c, so we also use
- * the "generic" name STRINT_PAIR.
- */
-typedef struct string_int_pair_st {
-    const char *name;
-    int retval;
-} OPT_PAIR, STRINT_PAIR;
-
-/* Flags to pass into opt_format; see FORMAT_xxx, below. */
-# define OPT_FMT_PEMDER          (1L <<  1)
-# define OPT_FMT_PKCS12          (1L <<  2)
-# define OPT_FMT_SMIME           (1L <<  3)
-# define OPT_FMT_ENGINE          (1L <<  4)
-# define OPT_FMT_MSBLOB          (1L <<  5)
-# define OPT_FMT_NETSCAPE        (1L <<  6)
-# define OPT_FMT_NSS             (1L <<  7)
-# define OPT_FMT_TEXT            (1L <<  8)
-# define OPT_FMT_HTTP            (1L <<  9)
-# define OPT_FMT_PVK             (1L << 10)
-# define OPT_FMT_PDE     (OPT_FMT_PEMDER | OPT_FMT_ENGINE)
-# define OPT_FMT_ANY     ( \
-        OPT_FMT_PEMDER | OPT_FMT_PKCS12 | OPT_FMT_SMIME | \
-        OPT_FMT_ENGINE | OPT_FMT_MSBLOB | OPT_FMT_NETSCAPE | \
-        OPT_FMT_NSS | OPT_FMT_TEXT | OPT_FMT_HTTP | OPT_FMT_PVK)
-
-char *opt_progname(const char *argv0);
-char *opt_getprog(void);
-char *opt_init(int ac, char **av, const OPTIONS * o);
-int opt_next();
-int opt_format(const char *s, unsigned long flags, int *result);
-int opt_int(const char *arg, int *result);
-int opt_ulong(const char *arg, unsigned long *result);
-int opt_long(const char *arg, long *result);
-#if defined(__STDC_VERSION__) && __STDC_VERSION__ >= 199901L && \
-    defined(INTMAX_MAX) && defined(UINTMAX_MAX)
-int opt_imax(const char *arg, intmax_t *result);
-int opt_umax(const char *arg, uintmax_t *result);
-#endif
-int opt_pair(const char *arg, const OPT_PAIR * pairs, int *result);
-int opt_cipher(const char *name, const EVP_CIPHER **cipherp);
-int opt_md(const char *name, const EVP_MD **mdp);
-char *opt_arg(void);
-char *opt_flag(void);
-char *opt_unknown(void);
-char *opt_reset(void);
-char **opt_rest(void);
-int opt_num_rest(void);
-int opt_verify(int i, X509_VERIFY_PARAM *vpm);
-void opt_help(const OPTIONS * list);
-int opt_format_error(const char *s, unsigned long flags);
-int opt_next(void);
+# ifdef OPENSSL_SYSNAME_WIN32
+#  define openssl_fdset(a,b) FD_SET((unsigned int)a, b)
+# else
+#  define openssl_fdset(a,b) FD_SET(a, b)
+# endif
 
 typedef struct args_st {
-    int size;
-    int argc;
-    char **argv;
+    char **data;
+    int count;
 } ARGS;
 
 # define PW_MIN_LENGTH 4
@@ -468,49 +225,49 @@ int password_callback(char *buf, int bufsiz, int verify, PW_CB_DATA *cb_data);
 int setup_ui_method(void);
 void destroy_ui_method(void);
 
-int chopup_args(ARGS *arg, char *buf);
+int should_retry(int i);
+int args_from_file(char *file, int *argc, char **argv[]);
+int str2fmt(char *s);
+void program_name(char *in, char *out, int size);
+int chopup_args(ARGS *arg, char *buf, int *argc, char **argv[]);
 # ifdef HEADER_X509_H
 int dump_cert_text(BIO *out, X509 *x);
 void print_name(BIO *out, const char *title, X509_NAME *nm,
                 unsigned long lflags);
 # endif
-void print_bignum_var(BIO *, BIGNUM *, const char*, int, unsigned char *);
-void print_array(BIO *, const char *, int, const unsigned char *);
 int set_cert_ex(unsigned long *flags, const char *arg);
 int set_name_ex(unsigned long *flags, const char *arg);
 int set_ext_copy(int *copy_type, const char *arg);
 int copy_extensions(X509 *x, X509_REQ *req, int copy_type);
-int app_passwd(char *arg1, char *arg2, char **pass1, char **pass2);
-int add_oid_section(CONF *conf);
-X509 *load_cert(const char *file, int format,
+int app_passwd(BIO *err, char *arg1, char *arg2, char **pass1, char **pass2);
+int add_oid_section(BIO *err, CONF *conf);
+X509 *load_cert(BIO *err, const char *file, int format,
                 const char *pass, ENGINE *e, const char *cert_descrip);
-X509_CRL *load_crl(const char *infile, int format);
-int load_cert_crl_http(const char *url, X509 **pcert, X509_CRL **pcrl);
-EVP_PKEY *load_key(const char *file, int format, int maybe_stdin,
+EVP_PKEY *load_key(BIO *err, const char *file, int format, int maybe_stdin,
                    const char *pass, ENGINE *e, const char *key_descrip);
-EVP_PKEY *load_pubkey(const char *file, int format, int maybe_stdin,
+EVP_PKEY *load_pubkey(BIO *err, const char *file, int format, int maybe_stdin,
                       const char *pass, ENGINE *e, const char *key_descrip);
-int load_certs(const char *file, STACK_OF(X509) **certs, int format,
-               const char *pass, ENGINE *e, const char *cert_descrip);
-int load_crls(const char *file, STACK_OF(X509_CRL) **crls, int format,
-              const char *pass, ENGINE *e, const char *cert_descrip);
-X509_STORE *setup_verify(char *CAfile, char *CApath,
-                         int noCAfile, int noCApath);
-int ctx_set_verify_locations(SSL_CTX *ctx, const char *CAfile,
-                             const char *CApath, int noCAfile, int noCApath);
-# ifdef OPENSSL_NO_ENGINE
-#  define setup_engine(engine, debug) NULL
-# else
-ENGINE *setup_engine(const char *engine, int debug);
+STACK_OF(X509) *load_certs(BIO *err, const char *file, int format,
+                           const char *pass, ENGINE *e,
+                           const char *cert_descrip);
+STACK_OF(X509_CRL) *load_crls(BIO *err, const char *file, int format,
+                              const char *pass, ENGINE *e,
+                              const char *cert_descrip);
+X509_STORE *setup_verify(BIO *bp, char *CAfile, char *CApath);
+# ifndef OPENSSL_NO_ENGINE
+ENGINE *setup_engine(BIO *err, const char *engine, int debug);
 # endif
+
 # ifndef OPENSSL_NO_OCSP
-OCSP_RESPONSE *process_responder(OCSP_REQUEST *req,
-                                 const char *host, const char *path,
-                                 const char *port, int use_ssl,
-                                 STACK_OF(CONF_VALUE) *headers,
+OCSP_RESPONSE *process_responder(BIO *err, OCSP_REQUEST *req,
+                                 char *host, char *path, char *port,
+                                 int use_ssl, STACK_OF(CONF_VALUE) *headers,
                                  int req_timeout);
 # endif
 
+int load_config(BIO *err, CONF *cnf);
+char *make_config_name(void);
+
 /* Functions defined in ca.c and also used in ocsp.c */
 int unpack_revinfo(ASN1_TIME **prevtm, int *preason, ASN1_OBJECT **phold,
                    ASN1_GENERALIZEDTIME **pinvtm, const char *str);
@@ -536,7 +293,6 @@ typedef struct ca_db_st {
     TXT_DB *db;
 } CA_DB;
 
-void* app_malloc(int sz, const char *what);
 BIGNUM *load_serial(char *serialfile, int create, ASN1_INTEGER **retai);
 int save_serial(char *serialfile, char *suffix, BIGNUM *serial,
                 ASN1_INTEGER **retai);
@@ -554,20 +310,14 @@ void free_index(CA_DB *db);
 int index_name_cmp(const OPENSSL_CSTRING *a, const OPENSSL_CSTRING *b);
 int parse_yesno(const char *str, int def);
 
-X509_NAME *parse_name(const char *str, long chtype, int multirdn);
+X509_NAME *parse_name(char *str, long chtype, int multirdn);
 int args_verify(char ***pargs, int *pargc,
-                int *badarg, X509_VERIFY_PARAM **pm);
-void policies_print(X509_STORE_CTX *ctx);
+                int *badarg, BIO *err, X509_VERIFY_PARAM **pm);
+void policies_print(BIO *out, X509_STORE_CTX *ctx);
 int bio_to_mem(unsigned char **out, int maxlen, BIO *in);
-int pkey_ctrl_string(EVP_PKEY_CTX *ctx, const char *value);
-int init_gen_str(EVP_PKEY_CTX **pctx,
+int pkey_ctrl_string(EVP_PKEY_CTX *ctx, char *value);
+int init_gen_str(BIO *err, EVP_PKEY_CTX **pctx,
                  const char *algname, ENGINE *e, int do_param);
-int do_X509_sign(X509 *x, EVP_PKEY *pkey, const EVP_MD *md,
-                 STACK_OF(OPENSSL_STRING) *sigopts);
-int do_X509_REQ_sign(X509_REQ *x, EVP_PKEY *pkey, const EVP_MD *md,
-                     STACK_OF(OPENSSL_STRING) *sigopts);
-int do_X509_CRL_sign(X509_CRL *x, EVP_PKEY *pkey, const EVP_MD *md,
-                     STACK_OF(OPENSSL_STRING) *sigopts);
 # ifndef OPENSSL_NO_PSK
 extern char *psk_key;
 # endif
@@ -576,36 +326,20 @@ void jpake_client_auth(BIO *out, BIO *conn, const char *secret);
 void jpake_server_auth(BIO *out, BIO *conn, const char *secret);
 # endif
 
-unsigned char *next_protos_parse(unsigned short *outlen, const char *in);
-
-void print_cert_checks(BIO *bio, X509 *x,
-                       const char *checkhost,
-                       const char *checkemail, const char *checkip);
-
-void store_setup_crl_download(X509_STORE *st);
-
-/* See OPT_FMT_xxx, above. */
-/* On some platforms, it's important to distinguish between text and binary
- * files.  On some, there might even be specific file formats for different
- * contents.  The FORMAT_xxx macros are meant to express an intent with the
- * file being read or created.
- */
-# define B_FORMAT_TEXT   0x8000
 # define FORMAT_UNDEF    0
-# define FORMAT_TEXT    (1 | B_FORMAT_TEXT)     /* Generic text */
-# define FORMAT_BINARY   2                      /* Generic binary */
-# define FORMAT_BASE64  (3 | B_FORMAT_TEXT)     /* Base64 */
-# define FORMAT_ASN1     4                      /* ASN.1/DER */
-# define FORMAT_PEM     (5 | B_FORMAT_TEXT)
-# define FORMAT_PKCS12   6
-# define FORMAT_SMIME   (7 | B_FORMAT_TEXT)
-# define FORMAT_ENGINE   8                      /* Not really a file format */
-# define FORMAT_PEMRSA  (9 | B_FORMAT_TEXT)     /* PEM RSAPubicKey format */
-# define FORMAT_ASN1RSA  10                     /* DER RSAPubicKey format */
-# define FORMAT_MSBLOB   11                     /* MS Key blob format */
-# define FORMAT_PVK      12                     /* MS PVK file format */
-# define FORMAT_HTTP     13                     /* Download using HTTP */
-# define FORMAT_NSS      14                     /* NSS keylog format */
+# define FORMAT_ASN1     1
+# define FORMAT_TEXT     2
+# define FORMAT_PEM      3
+# define FORMAT_NETSCAPE 4
+# define FORMAT_PKCS12   5
+# define FORMAT_SMIME    6
+# define FORMAT_ENGINE   7
+# define FORMAT_IISSGC   8      /* XXX this stupid macro helps us to avoid
+                                 * adding yet another param to load_*key() */
+# define FORMAT_PEMRSA   9      /* PEM RSAPubicKey format */
+# define FORMAT_ASN1RSA  10     /* DER RSAPubicKey format */
+# define FORMAT_MSBLOB   11     /* MS Key blob format */
+# define FORMAT_PVK      12     /* MS PVK file format */
 
 # define EXT_COPY_NONE   0
 # define EXT_COPY_ADD    1
@@ -617,22 +351,11 @@ void store_setup_crl_download(X509_STORE *st);
 
 # define SERIAL_RAND_BITS        64
 
-int app_hex(char);
 int app_isdir(const char *);
-int app_access(const char *, int flag);
 int raw_read_stdin(void *, int);
 int raw_write_stdout(const void *, int);
 
 # define TM_START        0
 # define TM_STOP         1
 double app_tminterval(int stop, int usertime);
-
-/* this is an accident waiting to happen (-Wshadow is your friend) */
-extern int verify_depth;
-extern int verify_quiet;
-extern int verify_error;
-extern int verify_return_error;
-
-# include "progs.h"
-
 #endif

apps/asn1pars.c

@@ -1,3 +1,4 @@
+/* apps/asn1pars.c */
 /* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
  * All rights reserved.
  *
@@ -69,186 +70,222 @@
 #include <openssl/x509.h>
 #include <openssl/pem.h>
 
-typedef enum OPTION_choice {
-    OPT_ERR = -1, OPT_EOF = 0, OPT_HELP,
-    OPT_INFORM, OPT_IN, OPT_OUT, OPT_INDENT, OPT_NOOUT,
-    OPT_OID, OPT_OFFSET, OPT_LENGTH, OPT_DUMP, OPT_DLIMIT,
-    OPT_STRPARSE, OPT_GENSTR, OPT_GENCONF, OPT_STRICTPEM
-} OPTION_CHOICE;
+/*-
+ * -inform arg  - input format - default PEM (DER or PEM)
+ * -in arg      - input file - default stdin
+ * -i           - indent the details by depth
+ * -offset      - where in the file to start
+ * -length      - how many bytes to use
+ * -oid file    - extra oid description file
+ */
 
-OPTIONS asn1parse_options[] = {
-    {"help", OPT_HELP, '-', "Display this summary"},
-    {"inform", OPT_INFORM, 'F', "input format - one of DER PEM"},
-    {"in", OPT_IN, '<', "input file"},
-    {"out", OPT_OUT, '>', "output file (output format is always DER)"},
-    {"i", OPT_INDENT, 0, "indents the output"},
-    {"noout", OPT_NOOUT, 0, "don't produce any output"},
-    {"offset", OPT_OFFSET, 'p', "offset into file"},
-    {"length", OPT_LENGTH, 'p', "length of section in file"},
-    {"oid", OPT_OID, '<', "file of extra oid definitions"},
-    {"dump", OPT_DUMP, 0, "unknown data in hex form"},
-    {"dlimit", OPT_DLIMIT, 'p',
-     "dump the first arg bytes of unknown data in hex form"},
-    {"strparse", OPT_STRPARSE, 's',
-     "offset; a series of these can be used to 'dig'"},
-    {OPT_MORE_STR, 0, 0, "into multiple ASN1 blob wrappings"},
-    {"genstr", OPT_GENSTR, 's', "string to generate ASN1 structure from"},
-    {"genconf", OPT_GENCONF, 's', "file to generate ASN1 structure from"},
-    {OPT_MORE_STR, 0, 0, "(-inform  will be ignored)"},
-    {"strictpem", OPT_STRICTPEM, 0,
-     "do not attempt base64 decode outside PEM markers"},
-    {NULL}
-};
+#undef PROG
+#define PROG    asn1parse_main
 
-static int do_generate(char *genstr, char *genconf, BUF_MEM *buf);
+int MAIN(int, char **);
 
-int asn1parse_main(int argc, char **argv)
+static int do_generate(BIO *bio, char *genstr, char *genconf, BUF_MEM *buf);
+
+int MAIN(int argc, char **argv)
 {
-    ASN1_TYPE *at = NULL;
-    BIO *in = NULL, *b64 = NULL, *derout = NULL;
+    int i, badops = 0, offset = 0, ret = 1, j;
+    unsigned int length = 0;
+    long num, tmplen;
+    BIO *in = NULL, *out = NULL, *b64 = NULL, *derout = NULL;
+    int informat, indent = 0, noout = 0, dump = 0;
+    char *infile = NULL, *str = NULL, *prog, *oidfile = NULL, *derfile = NULL;
+    char *genstr = NULL, *genconf = NULL;
+    unsigned char *tmpbuf;
+    const unsigned char *ctmpbuf;
     BUF_MEM *buf = NULL;
     STACK_OF(OPENSSL_STRING) *osk = NULL;
-    char *genstr = NULL, *genconf = NULL;
-    char *infile = NULL, *str = NULL, *oidfile = NULL, *derfile = NULL;
-    char *name = NULL, *header = NULL, *prog;
-    const unsigned char *ctmpbuf;
-    int indent = 0, noout = 0, dump = 0, strictpem = 0, informat = FORMAT_PEM;
-    int offset = 0, ret = 1, i, j;
-    long num, tmplen;
-    unsigned char *tmpbuf;
-    unsigned int length = 0;
-    OPTION_CHOICE o;
+    ASN1_TYPE *at = NULL;
 
-    prog = opt_init(argc, argv, asn1parse_options);
+    informat = FORMAT_PEM;
 
+    apps_startup();
+
+    if (bio_err == NULL)
+        if ((bio_err = BIO_new(BIO_s_file())) != NULL)
+            BIO_set_fp(bio_err, stderr, BIO_NOCLOSE | BIO_FP_TEXT);
+
+    if (!load_config(bio_err, NULL))
+        goto end;
+
+    prog = argv[0];
+    argc--;
+    argv++;
     if ((osk = sk_OPENSSL_STRING_new_null()) == NULL) {
-        BIO_printf(bio_err, "%s: Memory allocation failure\n", prog);
+        BIO_printf(bio_err, "Memory allocation failure\n");
         goto end;
     }
-
-    while ((o = opt_next()) != OPT_EOF) {
-        switch (o) {
-        case OPT_EOF:
-        case OPT_ERR:
- opthelp:
-            BIO_printf(bio_err, "%s: Use -help for summary.\n", prog);
-            goto end;
-        case OPT_HELP:
-            opt_help(asn1parse_options);
-            ret = 0;
-            goto end;
-        case OPT_INFORM:
-            if (!opt_format(opt_arg(), OPT_FMT_PEMDER, &informat))
-                goto opthelp;
-            break;
-        case OPT_IN:
-            infile = opt_arg();
-            break;
-        case OPT_OUT:
-            derfile = opt_arg();
-            break;
-        case OPT_INDENT:
+    while (argc >= 1) {
+        if (strcmp(*argv, "-inform") == 0) {
+            if (--argc < 1)
+                goto bad;
+            informat = str2fmt(*(++argv));
+        } else if (strcmp(*argv, "-in") == 0) {
+            if (--argc < 1)
+                goto bad;
+            infile = *(++argv);
+        } else if (strcmp(*argv, "-out") == 0) {
+            if (--argc < 1)
+                goto bad;
+            derfile = *(++argv);
+        } else if (strcmp(*argv, "-i") == 0) {
             indent = 1;
-            break;
-        case OPT_NOOUT:
+        } else if (strcmp(*argv, "-noout") == 0)
             noout = 1;
-            break;
-        case OPT_OID:
-            oidfile = opt_arg();
-            break;
-        case OPT_OFFSET:
-            offset = strtol(opt_arg(), NULL, 0);
-            break;
-        case OPT_LENGTH:
-            length = atoi(opt_arg());
-            break;
-        case OPT_DUMP:
+        else if (strcmp(*argv, "-oid") == 0) {
+            if (--argc < 1)
+                goto bad;
+            oidfile = *(++argv);
+        } else if (strcmp(*argv, "-offset") == 0) {
+            if (--argc < 1)
+                goto bad;
+            offset = atoi(*(++argv));
+        } else if (strcmp(*argv, "-length") == 0) {
+            if (--argc < 1)
+                goto bad;
+            length = atoi(*(++argv));
+            if (length == 0)
+                goto bad;
+        } else if (strcmp(*argv, "-dump") == 0) {
             dump = -1;
-            break;
-        case OPT_DLIMIT:
-            dump = atoi(opt_arg());
-            break;
-        case OPT_STRPARSE:
-            sk_OPENSSL_STRING_push(osk, opt_arg());
-            break;
-        case OPT_GENSTR:
-            genstr = opt_arg();
-            break;
-        case OPT_GENCONF:
-            genconf = opt_arg();
-            break;
-        case OPT_STRICTPEM:
-            strictpem = 1;
-            informat = FORMAT_PEM;
+        } else if (strcmp(*argv, "-dlimit") == 0) {
+            if (--argc < 1)
+                goto bad;
+            dump = atoi(*(++argv));
+            if (dump <= 0)
+                goto bad;
+        } else if (strcmp(*argv, "-strparse") == 0) {
+            if (--argc < 1)
+                goto bad;
+            sk_OPENSSL_STRING_push(osk, *(++argv));
+        } else if (strcmp(*argv, "-genstr") == 0) {
+            if (--argc < 1)
+                goto bad;
+            genstr = *(++argv);
+        } else if (strcmp(*argv, "-genconf") == 0) {
+            if (--argc < 1)
+                goto bad;
+            genconf = *(++argv);
+        } else {
+            BIO_printf(bio_err, "unknown option %s\n", *argv);
+            badops = 1;
             break;
         }
+        argc--;
+        argv++;
     }
-    argc = opt_num_rest();
-    argv = opt_rest();
+
+    if (badops) {
+ bad:
+        BIO_printf(bio_err, "%s [options] <infile\n", prog);
+        BIO_printf(bio_err, "where options are\n");
+        BIO_printf(bio_err, " -inform arg   input format - one of DER PEM\n");
+        BIO_printf(bio_err, " -in arg       input file\n");
+        BIO_printf(bio_err,
+                   " -out arg      output file (output format is always DER\n");
+        BIO_printf(bio_err, " -noout arg    don't produce any output\n");
+        BIO_printf(bio_err, " -offset arg   offset into file\n");
+        BIO_printf(bio_err, " -length arg   length of section in file\n");
+        BIO_printf(bio_err, " -i            indent entries\n");
+        BIO_printf(bio_err, " -dump         dump unknown data in hex form\n");
+        BIO_printf(bio_err,
+                   " -dlimit arg   dump the first arg bytes of unknown data in hex form\n");
+        BIO_printf(bio_err, " -oid file     file of extra oid definitions\n");
+        BIO_printf(bio_err, " -strparse offset\n");
+        BIO_printf(bio_err,
+                   "               a series of these can be used to 'dig' into multiple\n");
+        BIO_printf(bio_err, "               ASN1 blob wrappings\n");
+        BIO_printf(bio_err,
+                   " -genstr str   string to generate ASN1 structure from\n");
+        BIO_printf(bio_err,
+                   " -genconf file file to generate ASN1 structure from\n");
+        goto end;
+    }
+
+    ERR_load_crypto_strings();
+
+    in = BIO_new(BIO_s_file());
+    out = BIO_new(BIO_s_file());
+    if ((in == NULL) || (out == NULL)) {
+        ERR_print_errors(bio_err);
+        goto end;
+    }
+    BIO_set_fp(out, stdout, BIO_NOCLOSE | BIO_FP_TEXT);
+#ifdef OPENSSL_SYS_VMS
+    {
+        BIO *tmpbio = BIO_new(BIO_f_linebuffer());
+        out = BIO_push(tmpbio, out);
+    }
+#endif
 
     if (oidfile != NULL) {
-        in = bio_open_default(oidfile, 'r', FORMAT_TEXT);
-        if (in == NULL)
-            goto end;
-        OBJ_create_objects(in);
-        BIO_free(in);
-    }
-
-    if ((in = bio_open_default(infile, 'r', informat)) == NULL)
-        goto end;
-
-    if (derfile && (derout = bio_open_default(derfile, 'w', FORMAT_ASN1)) == NULL)
-        goto end;
-
-    if (strictpem) {
-        if (PEM_read_bio(in, &name, &header, (unsigned char **)&str, &num) !=
-            1) {
-            BIO_printf(bio_err, "Error reading PEM file\n");
+        if (BIO_read_filename(in, oidfile) <= 0) {
+            BIO_printf(bio_err, "problems opening %s\n", oidfile);
             ERR_print_errors(bio_err);
             goto end;
         }
-    } else {
-
-        if ((buf = BUF_MEM_new()) == NULL)
-            goto end;
-        if (!BUF_MEM_grow(buf, BUFSIZ * 8))
-            goto end;           /* Pre-allocate :-) */
-
-        if (genstr || genconf) {
-            num = do_generate(genstr, genconf, buf);
-            if (num < 0) {
-                ERR_print_errors(bio_err);
-                goto end;
-            }
-        }
-
-        else {
-
-            if (informat == FORMAT_PEM) {
-                BIO *tmp;
-
-                if ((b64 = BIO_new(BIO_f_base64())) == NULL)
-                    goto end;
-                BIO_push(b64, in);
-                tmp = in;
-                in = b64;
-                b64 = tmp;
-            }
-
-            num = 0;
-            for (;;) {
-                if (!BUF_MEM_grow(buf, (int)num + BUFSIZ))
-                    goto end;
-                i = BIO_read(in, &(buf->data[num]), BUFSIZ);
-                if (i <= 0)
-                    break;
-                num += i;
-            }
-        }
-        str = buf->data;
-
+        OBJ_create_objects(in);
     }
 
+    if (infile == NULL)
+        BIO_set_fp(in, stdin, BIO_NOCLOSE);
+    else {
+        if (BIO_read_filename(in, infile) <= 0) {
+            perror(infile);
+            goto end;
+        }
+    }
+
+    if (derfile) {
+        if (!(derout = BIO_new_file(derfile, "wb"))) {
+            BIO_printf(bio_err, "problems opening %s\n", derfile);
+            ERR_print_errors(bio_err);
+            goto end;
+        }
+    }
+
+    if ((buf = BUF_MEM_new()) == NULL)
+        goto end;
+    if (!BUF_MEM_grow(buf, BUFSIZ * 8))
+        goto end;               /* Pre-allocate :-) */
+
+    if (genstr || genconf) {
+        num = do_generate(bio_err, genstr, genconf, buf);
+        if (num < 0) {
+            ERR_print_errors(bio_err);
+            goto end;
+        }
+    }
+
+    else {
+
+        if (informat == FORMAT_PEM) {
+            BIO *tmp;
+
+            if ((b64 = BIO_new(BIO_f_base64())) == NULL)
+                goto end;
+            BIO_push(b64, in);
+            tmp = in;
+            in = b64;
+            b64 = tmp;
+        }
+
+        num = 0;
+        for (;;) {
+            if (!BUF_MEM_grow(buf, (int)num + BUFSIZ))
+                goto end;
+            i = BIO_read(in, &(buf->data[num]), BUFSIZ);
+            if (i <= 0)
+                break;
+            num += i;
+        }
+    }
+    str = buf->data;
+
     /* If any structs to parse go through in sequence */
 
     if (sk_OPENSSL_STRING_num(osk)) {
@@ -276,9 +313,9 @@ int asn1parse_main(int argc, char **argv)
             }
             typ = ASN1_TYPE_get(at);
             if ((typ == V_ASN1_OBJECT)
-                || (typ == V_ASN1_BOOLEAN)
                 || (typ == V_ASN1_NULL)) {
-                BIO_printf(bio_err, "Can't parse %s type\n", ASN1_tag2str(typ));
+                BIO_printf(bio_err, "Can't parse %s type\n",
+                           typ == V_ASN1_NULL ? "NULL" : "OBJECT");
                 ERR_print_errors(bio_err);
                 goto end;
             }
@@ -307,7 +344,7 @@ int asn1parse_main(int argc, char **argv)
         }
     }
     if (!noout &&
-        !ASN1_parse_dump(bio_out, (unsigned char *)&(str[offset]), length,
+        !ASN1_parse_dump(out, (unsigned char *)&(str[offset]), length,
                          indent, dump)) {
         ERR_print_errors(bio_err);
         goto end;
@@ -315,35 +352,41 @@ int asn1parse_main(int argc, char **argv)
     ret = 0;
  end:
     BIO_free(derout);
-    BIO_free(in);
-    BIO_free(b64);
+    if (in != NULL)
+        BIO_free(in);
+    if (out != NULL)
+        BIO_free_all(out);
+    if (b64 != NULL)
+        BIO_free(b64);
     if (ret != 0)
         ERR_print_errors(bio_err);
-    BUF_MEM_free(buf);
-    OPENSSL_free(name);
-    OPENSSL_free(header);
-    if (strictpem)
-        OPENSSL_free(str);
-    ASN1_TYPE_free(at);
-    sk_OPENSSL_STRING_free(osk);
+    if (buf != NULL)
+        BUF_MEM_free(buf);
+    if (at != NULL)
+        ASN1_TYPE_free(at);
+    if (osk != NULL)
+        sk_OPENSSL_STRING_free(osk);
     OBJ_cleanup();
-    return (ret);
+    apps_shutdown();
+    OPENSSL_EXIT(ret);
 }
 
-static int do_generate(char *genstr, char *genconf, BUF_MEM *buf)
+static int do_generate(BIO *bio, char *genstr, char *genconf, BUF_MEM *buf)
 {
     CONF *cnf = NULL;
     int len;
+    long errline;
     unsigned char *p;
     ASN1_TYPE *atyp = NULL;
 
     if (genconf) {
-        if ((cnf = app_load_config(genconf)) == NULL)
-            goto err;
+        cnf = NCONF_new(NULL);
+        if (!NCONF_load(cnf, genconf, &errline))
+            goto conferr;
         if (!genstr)
             genstr = NCONF_get_string(cnf, "default", "asn1");
         if (!genstr) {
-            BIO_printf(bio_err, "Can't find 'asn1' in '%s'\n", genconf);
+            BIO_printf(bio, "Can't find 'asn1' in '%s'\n", genconf);
             goto err;
         }
     }
@@ -370,8 +413,18 @@ static int do_generate(char *genstr, char *genconf, BUF_MEM *buf)
     ASN1_TYPE_free(atyp);
     return len;
 
+ conferr:
+
+    if (errline > 0)
+        BIO_printf(bio, "Error on line %ld of config file '%s'\n",
+                   errline, genconf);
+    else
+        BIO_printf(bio, "Error loading config file '%s'\n", genconf);
+
  err:
     NCONF_free(cnf);
     ASN1_TYPE_free(atyp);
+
     return -1;
+
 }

apps/build.info

@@ -1,18 +0,0 @@
-{- use File::Spec::Functions qw/catdir rel2abs/; -}
-PROGRAMS=openssl
-SOURCE[openssl]=\
-        openssl.c \
-        asn1pars.c ca.c ciphers.c cms.c crl.c crl2p7.c dgst.c dhparam.c \
-        dsa.c dsaparam.c ec.c ecparam.c enc.c engine.c errstr.c gendsa.c \
-        genpkey.c genrsa.c nseq.c ocsp.c passwd.c pkcs12.c pkcs7.c pkcs8.c \
-        pkey.c pkeyparam.c pkeyutl.c prime.c rand.c req.c rsa.c rsautl.c \
-        s_client.c s_server.c s_time.c sess_id.c smime.c speed.c spkac.c \
-        srp.c ts.c verify.c version.c x509.c rehash.c \
-        apps.c opt.c s_cb.c s_socket.c \
-        app_rand.c \
-        {- $target{apps_extra_src} -}
-INCLUDE[openssl]={- rel2abs(catdir($builddir,"../include")) -} .. ../include
-DEPEND[openssl]=../libssl
-
-SCRIPTS=CA.pl
-SOURCE[CA.pl]=CA.pl.in

apps/ca-key.pem

@@ -1,16 +1,15 @@
------BEGIN PRIVATE KEY-----
-MIICdgIBADANBgkqhkiG9w0BAQEFAASCAmAwggJcAgEAAoGBAL4tQNyKy4U2zX6l
-IZvORB1edmwMwIgSB4cgoFECrG5pixzYxKauZkAwKG9/+L4DB8qXRjfXWcvafcOU
-DlYpRROykJ7wGkiqmqbZyrxY8DWjk5ZZQXiSuhYOAJB+Fyfb11JZV6+CvBQX/1g+
-vhJr39Gmp6oAesoYrj90ecozClmnAgMBAAECgYA3j6sSg+5f9hnldUMzbPjTh8Sb
-XsJlPrc6UFrmMBzGiUleXSpe9Dbla+x0XvQCN4pwMvAN4nnWp/f0Su5BV/9Y93nb
-im5ijGNrfN9i6QrnqGCr+MMute+4E8HR2pCScX0mBLDDf40SmDvMzCaxtd21keyr
-9DqHgInQZNEi6NKlkQJBAPCbUTFg6iQ6VTCQ8CsEf5q2xHhuTK23fJ999lvWVxN7
-QsvWb9RP9Ng34HVtvB7Pl6P7FyHLQYiDJhhvYR0L0+kCQQDKV/09Kt6Wjf5Omp1I
-wd3A+tFnipdqnPw+qNHGjevv0hYiEIWQOYbx00zXgaX+WN/pzV9eeNN2XAxlNJ++
-dxcPAkBrzeuPKFFAcjKBVC+H1rgl5gYZv7Hzk+buv02G0H6rZ+sB0c7BXiHiTwbv
-Fn/XfkP/YR14Ms3mEH0dLaphjU8hAkEAh3Ar/rRiN04mCcEuRFQXtaNtZSv8PA2G
-Pf7MI2Y9pdHupLCAZlBLRjTUO2/5hu1AO4QPMPIZQSFN3rRBtMCL+wJAMp/m2hvI
-TmtbMp/IrKGfma09e3yFiCmoNn7cHLJ7jLvXcacV2XNzpr9YHfBxiZo0g9FqZKvv
-PZoQ5B2XJ7bhTQ==
------END PRIVATE KEY-----
+-----BEGIN RSA PRIVATE KEY-----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+-----END RSA PRIVATE KEY-----

apps/ca-req.pem

@@ -1,11 +1,11 @@
 -----BEGIN CERTIFICATE REQUEST-----
-MIIBmzCCAQQCAQAwWzELMAkGA1UEBhMCQVUxEzARBgNVBAgMClF1ZWVuc2xhbmQx
-GjAYBgNVBAoMEUNyeXB0U29mdCBQdHkgTHRkMRswGQYDVQQDDBJUZXN0IENBICgx
-MDI0IGJpdCkwgZ8wDQYJKoZIhvcNAQEBBQADgY0AMIGJAoGBAL4tQNyKy4U2zX6l
-IZvORB1edmwMwIgSB4cgoFECrG5pixzYxKauZkAwKG9/+L4DB8qXRjfXWcvafcOU
-DlYpRROykJ7wGkiqmqbZyrxY8DWjk5ZZQXiSuhYOAJB+Fyfb11JZV6+CvBQX/1g+
-vhJr39Gmp6oAesoYrj90ecozClmnAgMBAAGgADANBgkqhkiG9w0BAQsFAAOBgQCo
-2jE7J1SNV7kyRm9m8CoPw8xYsuVcVFxPheBymYp8BlO0/rSdYygRjobpYnLVRUPZ
-pV792wzT1Rp4sXfZWO10lkFY4yi0pH2cdK2RX7qedibV1Xu9vt/yYANFBKVpA4dy
-PRyTQwi3In1N8hdfddpYR8f5MIUYRe5poFMIJcf8JA==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 -----END CERTIFICATE REQUEST-----

apps/ciphers.c

@@ -1,3 +1,4 @@
+/* apps/ciphers.c */
 /* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
  * All rights reserved.
  *
@@ -58,143 +59,99 @@
 #include <stdio.h>
 #include <stdlib.h>
 #include <string.h>
+#ifdef OPENSSL_NO_STDIO
+# define APPS_WIN16
+#endif
 #include "apps.h"
 #include <openssl/err.h>
 #include <openssl/ssl.h>
 
-typedef enum OPTION_choice {
-    OPT_ERR = -1, OPT_EOF = 0, OPT_HELP,
-    OPT_STDNAME,
-    OPT_SSL3,
-    OPT_TLS1,
-    OPT_TLS1_1,
-    OPT_TLS1_2,
-    OPT_PSK,
-    OPT_V, OPT_UPPER_V, OPT_S
-} OPTION_CHOICE;
+#undef PROG
+#define PROG    ciphers_main
 
-OPTIONS ciphers_options[] = {
-    {"help", OPT_HELP, '-', "Display this summary"},
-    {"v", OPT_V, '-', "Verbose listing of the SSL/TLS ciphers"},
-    {"V", OPT_UPPER_V, '-', "Even more verbose"},
-    {"s", OPT_S, '-', "Only supported ciphers"},
-#ifndef OPENSSL_NO_SSL3
-    {"ssl3", OPT_SSL3, '-', "SSL3 mode"},
-#endif
-#ifndef OPENSSL_NO_TLS1
-    {"tls1", OPT_TLS1, '-', "TLS1 mode"},
-#endif
-#ifndef OPENSSL_NO_TLS1_1
-    {"tls1_1", OPT_TLS1_1, '-', "TLS1.1 mode"},
-#endif
-#ifndef OPENSSL_NO_TLS1_2
-    {"tls1_2", OPT_TLS1_2, '-', "TLS1.2 mode"},
-#endif
-#ifndef OPENSSL_NO_SSL_TRACE
-    {"stdname", OPT_STDNAME, '-', "Show standard cipher names"},
-#endif
-#ifndef OPENSSL_NO_PSK
-    {"psk", OPT_PSK, '-', "include ciphersuites requiring PSK"},
-#endif
-    {NULL}
+static const char *ciphers_usage[] = {
+    "usage: ciphers args\n",
+    " -v          - verbose mode, a textual listing of the SSL/TLS ciphers in OpenSSL\n",
+    " -V          - even more verbose\n",
+    " -ssl2       - SSL2 mode\n",
+    " -ssl3       - SSL3 mode\n",
+    " -tls1       - TLS1 mode\n",
+    NULL
 };
 
-#ifndef OPENSSL_NO_PSK
-static unsigned int dummy_psk(SSL *ssl, const char *hint, char *identity,
-                              unsigned int max_identity_len,
-                              unsigned char *psk,
-                              unsigned int max_psk_len)
-{
-    return 0;
-}
-#endif
+int MAIN(int, char **);
 
-int ciphers_main(int argc, char **argv)
+int MAIN(int argc, char **argv)
 {
+    int ret = 1, i;
+    int verbose = 0, Verbose = 0;
+    const char **pp;
+    const char *p;
+    int badops = 0;
     SSL_CTX *ctx = NULL;
     SSL *ssl = NULL;
-    STACK_OF(SSL_CIPHER) *sk = NULL;
-    const SSL_METHOD *meth = TLS_server_method();
-    int ret = 1, i, verbose = 0, Verbose = 0, use_supported = 0;
-#ifndef OPENSSL_NO_SSL_TRACE
-    int stdname = 0;
-#endif
-#ifndef OPENSSL_NO_PSK
-    int psk = 0;
-#endif
-    const char *p;
-    char *ciphers = NULL, *prog;
+    char *ciphers = NULL;
+    const SSL_METHOD *meth = NULL;
+    STACK_OF(SSL_CIPHER) *sk;
     char buf[512];
-    OPTION_CHOICE o;
+    BIO *STDout = NULL;
 
-    prog = opt_init(argc, argv, ciphers_options);
-    while ((o = opt_next()) != OPT_EOF) {
-        switch (o) {
-        case OPT_EOF:
-        case OPT_ERR:
- opthelp:
-            BIO_printf(bio_err, "%s: Use -help for summary.\n", prog);
-            goto end;
-        case OPT_HELP:
-            opt_help(ciphers_options);
-            ret = 0;
-            goto end;
-        case OPT_V:
-            verbose = 1;
-            break;
-        case OPT_UPPER_V:
-            verbose = Verbose = 1;
-            break;
-        case OPT_S:
-            use_supported = 1;
-            break;
-        case OPT_STDNAME:
-#ifndef OPENSSL_NO_SSL_TRACE
-            stdname = verbose = 1;
+    meth = SSLv23_server_method();
+
+    apps_startup();
+
+    if (bio_err == NULL)
+        bio_err = BIO_new_fp(stderr, BIO_NOCLOSE);
+    STDout = BIO_new_fp(stdout, BIO_NOCLOSE);
+#ifdef OPENSSL_SYS_VMS
+    {
+        BIO *tmpbio = BIO_new(BIO_f_linebuffer());
+        STDout = BIO_push(tmpbio, STDout);
+    }
+#endif
+    if (!load_config(bio_err, NULL))
+        goto end;
+
+    argc--;
+    argv++;
+    while (argc >= 1) {
+        if (strcmp(*argv, "-v") == 0)
+            verbose = 1;
+        else if (strcmp(*argv, "-V") == 0)
+            verbose = Verbose = 1;
+#ifndef OPENSSL_NO_SSL2
+        else if (strcmp(*argv, "-ssl2") == 0)
+            meth = SSLv2_client_method();
 #endif
-            break;
-        case OPT_SSL3:
 #ifndef OPENSSL_NO_SSL3
+        else if (strcmp(*argv, "-ssl3") == 0)
             meth = SSLv3_client_method();
 #endif
-            break;
-        case OPT_TLS1:
 #ifndef OPENSSL_NO_TLS1
+        else if (strcmp(*argv, "-tls1") == 0)
             meth = TLSv1_client_method();
 #endif
+        else if ((strncmp(*argv, "-h", 2) == 0) || (strcmp(*argv, "-?") == 0)) {
+            badops = 1;
             break;
-        case OPT_TLS1_1:
-#ifndef OPENSSL_NO_TLS1_1
-            meth = TLSv1_1_client_method();
-#endif
-            break;
-        case OPT_TLS1_2:
-#ifndef OPENSSL_NO_TLS1_2
-            meth = TLSv1_2_client_method();
-#endif
-            break;
-        case OPT_PSK:
-#ifndef OPENSSL_NO_PSK
-            psk = 1;
-#endif
-            break;
+        } else {
+            ciphers = *argv;
         }
+        argc--;
+        argv++;
     }
-    argv = opt_rest();
-    argc = opt_num_rest();
 
-    if (argc == 1)
-        ciphers = *argv;
-    else if (argc != 0)
-        goto opthelp;
+    if (badops) {
+        for (pp = ciphers_usage; (*pp != NULL); pp++)
+            BIO_printf(bio_err, "%s", *pp);
+        goto end;
+    }
+
+    OpenSSL_add_ssl_algorithms();
 
     ctx = SSL_CTX_new(meth);
     if (ctx == NULL)
         goto err;
-#ifndef OPENSSL_NO_PSK
-    if (psk)
-        SSL_CTX_set_psk_client_callback(ctx, dummy_psk);
-#endif
     if (ciphers != NULL) {
         if (!SSL_CTX_set_cipher_list(ctx, ciphers)) {
             BIO_printf(bio_err, "Error in cipher list\n");
@@ -205,62 +162,64 @@ int ciphers_main(int argc, char **argv)
     if (ssl == NULL)
         goto err;
 
-    if (use_supported)
-        sk = SSL_get1_supported_ciphers(ssl);
-    else
-        sk = SSL_get_ciphers(ssl);
-
     if (!verbose) {
-        for (i = 0; i < sk_SSL_CIPHER_num(sk); i++) {
-            const SSL_CIPHER *c = sk_SSL_CIPHER_value(sk, i);
-            p = SSL_CIPHER_get_name(c);
+        for (i = 0;; i++) {
+            p = SSL_get_cipher_list(ssl, i);
             if (p == NULL)
                 break;
             if (i != 0)
-                BIO_printf(bio_out, ":");
-            BIO_printf(bio_out, "%s", p);
+                BIO_printf(STDout, ":");
+            BIO_printf(STDout, "%s", p);
         }
-        BIO_printf(bio_out, "\n");
-    } else {
+        BIO_printf(STDout, "\n");
+    } else {                    /* verbose */
+
+        sk = SSL_get_ciphers(ssl);
 
         for (i = 0; i < sk_SSL_CIPHER_num(sk); i++) {
-            const SSL_CIPHER *c;
+            SSL_CIPHER *c;
 
             c = sk_SSL_CIPHER_value(sk, i);
 
             if (Verbose) {
-                unsigned long id = SSL_CIPHER_get_id(c);
+                unsigned long id = c->id;
                 int id0 = (int)(id >> 24);
                 int id1 = (int)((id >> 16) & 0xffL);
                 int id2 = (int)((id >> 8) & 0xffL);
                 int id3 = (int)(id & 0xffL);
 
-                if ((id & 0xff000000L) == 0x03000000L)
-                    BIO_printf(bio_out, "          0x%02X,0x%02X - ", id2, id3); /* SSL3
-                                                                                  * cipher */
-                else
-                    BIO_printf(bio_out, "0x%02X,0x%02X,0x%02X,0x%02X - ", id0, id1, id2, id3); /* whatever */
+                if ((id & 0xff000000L) == 0x02000000L) {
+                    /* SSL2 cipher */
+                    BIO_printf(STDout, "     0x%02X,0x%02X,0x%02X - ", id1,
+                               id2, id3);
+                } else if ((id & 0xff000000L) == 0x03000000L) {
+                    /* SSL3 cipher */
+                    BIO_printf(STDout, "          0x%02X,0x%02X - ", id2,
+                               id3);
+                } else {
+                    /* whatever */
+                    BIO_printf(STDout, "0x%02X,0x%02X,0x%02X,0x%02X - ", id0,
+                               id1, id2, id3);
+                }
             }
-#ifndef OPENSSL_NO_SSL_TRACE
-            if (stdname) {
-                const char *nm = SSL_CIPHER_standard_name(c);
-                if (nm == NULL)
-                    nm = "UNKNOWN";
-                BIO_printf(bio_out, "%s - ", nm);
-            }
-#endif
-            BIO_puts(bio_out, SSL_CIPHER_description(c, buf, sizeof buf));
+
+            BIO_puts(STDout, SSL_CIPHER_description(c, buf, sizeof buf));
         }
     }
 
     ret = 0;
-    goto end;
+    if (0) {
  err:
-    ERR_print_errors(bio_err);
+        SSL_load_error_strings();
+        ERR_print_errors(bio_err);
+    }
  end:
-    if (use_supported)
-        sk_SSL_CIPHER_free(sk);
-    SSL_CTX_free(ctx);
-    SSL_free(ssl);
-    return (ret);
+    if (ctx != NULL)
+        SSL_CTX_free(ctx);
+    if (ssl != NULL)
+        SSL_free(ssl);
+    if (STDout != NULL)
+        BIO_free_all(STDout);
+    apps_shutdown();
+    OPENSSL_EXIT(ret);
 }