Prepare for 1.0.0o release

Reviewed-by: Stephen Henson <steve@openssl.org>
Updates to NEWS
2014-10-15 13:52:08 +01:00 · 2014-10-15 08:49:50 -04:00 · 2014-10-15 08:49:50 -04:00 · 2014-10-15 08:49:50 -04:00 · 2014-10-15 08:49:50 -04:00 · 2014-10-15 14:47:17 +02:00
850 changed files with 14533 additions and 168443 deletions
--- a/.gitignore
+++ b/.gitignore
@@ -10,15 +10,10 @@
 # Top level excludes
 /Makefile.bak
 /Makefile
-/MINFO
 /*.a
 /include
 /*.pc
 /rehash.time
-/inc.*
-/makefile.*
-/out.*
-/tmp.*

 # Most *.c files under test/ are symlinks
 /test/*.c
--- a/797
+++ b/797
@@ -2,344 +2,44 @@
 OpenSSL CHANGES
 _______________

- Changes between 1.0.1i and 1.0.2 [xx XXX xxxx]
+ Changes between 1.0.0n and 1.0.0o [15 Oct 2014]

-  *) Accelerated NIST P-256 elliptic curve implementation for x86_64
-     (other platforms pending).
-     [Shay Gueron (Intel Corp), Andy Polyakov]
+  *) Session Ticket Memory Leak.

-  *) Add support for the SignedCertificateTimestampList certificate and
-     OCSP response extensions from RFC6962.
-     [Rob Stradling]
-
-  *) Fix ec_GFp_simple_points_make_affine (thus, EC_POINTs_mul etc.)
-     for corner cases. (Certain input points at infinity could lead to
-     bogus results, with non-infinity inputs mapped to infinity too.)
-     [Bodo Moeller]
-
-  *) Initial support for PowerISA 2.0.7, first implemented in POWER8.
-     This covers AES, SHA256/512 and GHASH. "Initial" means that most
-     common cases are optimized and there still is room for further
-     improvements. Vector Permutation AES for Altivec is also added.
-     [Andy Polyakov]
-
-  *) Add support for little-endian ppc64 Linux target.
-     [Marcelo Cerri (IBM)]
-
-  *) Initial support for AMRv8 ISA crypto extensions. This covers AES,
-     SHA1, SHA256 and GHASH. "Initial" means that most common cases
-     are optimized and there still is room for further improvements.
-     Both 32- and 64-bit modes are supported.
-     [Andy Polyakov, Ard Biesheuvel (Linaro)]
-
-  *) Improved ARMv7 NEON support.
-     [Andy Polyakov]
-
-  *) Support for SPARC Architecture 2011 crypto extensions, first
-     implemented in SPARC T4. This covers AES, DES, Camellia, SHA1,
-     SHA256/512, MD5, GHASH and modular exponentiation.
-     [Andy Polyakov, David Miller]
-
-  *) Accelerated modular exponentiation for Intel processors, a.k.a.
-     RSAZ.
-     [Shay Gueron (Intel Corp)]
-
-  *) Support for new and upcoming Intel processors, including AVX2,
-     BMI and SHA ISA extensions. This includes additional "stitched"
-     implementations, AESNI-SHA256 and GCM, and multi-buffer support
-     for TLS encrypt.
-
-     This work was sponsored by Intel Corp.
-     [Andy Polyakov]
-
-  *) Use algorithm specific chains in SSL_CTX_use_certificate_chain_file():
-     this fixes a limiation in previous versions of OpenSSL.
+     When an OpenSSL SSL/TLS/DTLS server receives a session ticket the
+     integrity of that ticket is first verified. In the event of a session
+     ticket integrity check failing, OpenSSL will fail to free memory
+     causing a memory leak. By sending a large number of invalid session
+     tickets an attacker could exploit this issue in a Denial Of Service
+     attack.
+     (CVE-2014-3567)
     [Steve Henson]

-  *) Extended RSA OAEP support via EVP_PKEY API. Options to specify digest,
-     MGF1 digest and OAEP label.
-     [Steve Henson]
+  *) Build option no-ssl3 is incomplete.

-  *) Add EVP support for key wrapping algorithms, to avoid problems with
-     existing code the flag EVP_CIPHER_CTX_WRAP_ALLOW has to be set in
-     the EVP_CIPHER_CTX or an error is returned. Add AES and DES3 wrap
-     algorithms and include tests cases.
-     [Steve Henson]
+     When OpenSSL is configured with "no-ssl3" as a build option, servers
+     could accept and complete a SSL 3.0 handshake, and clients could be
+     configured to send them.
+     (CVE-2014-3568)
+     [Akamai and the OpenSSL team]

-  *) Add functions to allocate and set the fields of an ECDSA_METHOD
-     structure.
-     [Douglas E. Engert, Steve Henson]
+  *) Add support for TLS_FALLBACK_SCSV.
+     Client applications doing fallback retries should call
+     SSL_set_mode(s, SSL_MODE_SEND_FALLBACK_SCSV).
+     (CVE-2014-3566)
+     [Adam Langley, Bodo Moeller]

-  *) New functions OPENSSL_gmtime_diff and ASN1_TIME_diff to find the
-     difference in days and seconds between two tm or ASN1_TIME structures.
-     [Steve Henson]
+  *) Add additional DigestInfo checks.
+ 
+     Reencode DigestInto in DER and check against the original when
+     verifying RSA signature: this will reject any improperly encoded
+     DigestInfo structures.

-  *) Add -rev test option to s_server to just reverse order of characters
-     received by client and send back to server. Also prints an abbreviated
-     summary of the connection parameters.
-     [Steve Henson]
-
-  *) New option -brief for s_client and s_server to print out a brief summary
-     of connection parameters.
-     [Steve Henson]
-
-  *) Add callbacks for arbitrary TLS extensions.
-     [Trevor Perrin <trevp@trevp.net> and Ben Laurie]
-
-  *) New option -crl_download in several openssl utilities to download CRLs
-     from CRLDP extension in certificates.
-     [Steve Henson]
-
-  *) New options -CRL and -CRLform for s_client and s_server for CRLs.
-     [Steve Henson]
-
-  *) New function X509_CRL_diff to generate a delta CRL from the difference
-     of two full CRLs. Add support to "crl" utility.
-     [Steve Henson]
-
-  *) New functions to set lookup_crls function and to retrieve
-     X509_STORE from X509_STORE_CTX.
-     [Steve Henson]
-
-  *) Print out deprecated issuer and subject unique ID fields in
-     certificates.
-     [Steve Henson]
-
-  *) Extend OCSP I/O functions so they can be used for simple general purpose
-     HTTP as well as OCSP. New wrapper function which can be used to download
-     CRLs using the OCSP API.
-     [Steve Henson]
-
-  *) Delegate command line handling in s_client/s_server to SSL_CONF APIs.
-     [Steve Henson]
-
-  *) SSL_CONF* functions. These provide a common framework for application
-     configuration using configuration files or command lines.
-     [Steve Henson]
-
-  *) SSL/TLS tracing code. This parses out SSL/TLS records using the
-     message callback and prints the results. Needs compile time option
-     "enable-ssl-trace". New options to s_client and s_server to enable
-     tracing.
-     [Steve Henson]
-
-  *) New ctrl and macro to retrieve supported points extensions.
-     Print out extension in s_server and s_client.
-     [Steve Henson]
-
-  *) New functions to retrieve certificate signature and signature
-     OID NID.
-     [Steve Henson]
-
-  *) Add functions to retrieve and manipulate the raw cipherlist sent by a
-     client to OpenSSL.
-     [Steve Henson]
-
-  *) New Suite B modes for TLS code. These use and enforce the requirements
-     of RFC6460: restrict ciphersuites, only permit Suite B algorithms and
-     only use Suite B curves. The Suite B modes can be set by using the
-     strings "SUITEB128", "SUITEB192" or "SUITEB128ONLY" for the cipherstring.
-     [Steve Henson]
-
-  *) New chain verification flags for Suite B levels of security. Check
-     algorithms are acceptable when flags are set in X509_verify_cert.
-     [Steve Henson]
-
-  *) Make tls1_check_chain return a set of flags indicating checks passed
-     by a certificate chain. Add additional tests to handle client
-     certificates: checks for matching certificate type and issuer name
-     comparison.
-     [Steve Henson]
-
-  *) If an attempt is made to use a signature algorithm not in the peer
-     preference list abort the handshake. If client has no suitable
-     signature algorithms in response to a certificate request do not
-     use the certificate.
-     [Steve Henson]
-
-  *) If server EC tmp key is not in client preference list abort handshake.
-     [Steve Henson]
-
-  *) Add support for certificate stores in CERT structure. This makes it
-     possible to have different stores per SSL structure or one store in
-     the parent SSL_CTX. Include distint stores for certificate chain
-     verification and chain building. New ctrl SSL_CTRL_BUILD_CERT_CHAIN
-     to build and store a certificate chain in CERT structure: returing
-     an error if the chain cannot be built: this will allow applications
-     to test if a chain is correctly configured.
-
-     Note: if the CERT based stores are not set then the parent SSL_CTX
-     store is used to retain compatibility with existing behaviour.
+     Note: this is a precautionary measure and no attacks are currently known.

     [Steve Henson]

-  *) New function ssl_set_client_disabled to set a ciphersuite disabled
-     mask based on the current session, check mask when sending client
-     hello and checking the requested ciphersuite.
-     [Steve Henson]
-
-  *) New ctrls to retrieve and set certificate types in a certificate
-     request message. Print out received values in s_client. If certificate
-     types is not set with custom values set sensible values based on
-     supported signature algorithms.
-     [Steve Henson]
-
-  *) Support for distinct client and server supported signature algorithms.
-     [Steve Henson]
-
-  *) Add certificate callback. If set this is called whenever a certificate
-     is required by client or server. An application can decide which
-     certificate chain to present based on arbitrary criteria: for example
-     supported signature algorithms. Add very simple example to s_server.
-     This fixes many of the problems and restrictions of the existing client
-     certificate callback: for example you can now clear an existing
-     certificate and specify the whole chain.
-     [Steve Henson]
-
-  *) Add new "valid_flags" field to CERT_PKEY structure which determines what
-     the certificate can be used for (if anything). Set valid_flags field 
-     in new tls1_check_chain function. Simplify ssl_set_cert_masks which used
-     to have similar checks in it.
-
-     Add new "cert_flags" field to CERT structure and include a "strict mode".
-     This enforces some TLS certificate requirements (such as only permitting
-     certificate signature algorithms contained in the supported algorithms
-     extension) which some implementations ignore: this option should be used
-     with caution as it could cause interoperability issues.
-     [Steve Henson]
-
-  *) Update and tidy signature algorithm extension processing. Work out
-     shared signature algorithms based on preferences and peer algorithms
-     and print them out in s_client and s_server. Abort handshake if no
-     shared signature algorithms.
-     [Steve Henson]
-
-  *) Add new functions to allow customised supported signature algorithms
-     for SSL and SSL_CTX structures. Add options to s_client and s_server
-     to support them.
-     [Steve Henson]
-
-  *) New function SSL_certs_clear() to delete all references to certificates
-     from an SSL structure. Before this once a certificate had been added
-     it couldn't be removed.
-     [Steve Henson]
-
-  *) Integrate hostname, email address and IP address checking with certificate
-     verification. New verify options supporting checking in opensl utility.
-     [Steve Henson]
-
-  *) Fixes and wildcard matching support to hostname and email checking
-     functions. Add manual page.
-     [Florian Weimer (Red Hat Product Security Team)]
-
-  *) New functions to check a hostname email or IP address against a
-     certificate. Add options x509 utility to print results of checks against
-     a certificate.
-     [Steve Henson]
-
-  *) Fix OCSP checking.
-     [Rob Stradling <rob.stradling@comodo.com> and Ben Laurie]
-
-  *) Initial experimental support for explicitly trusted non-root CAs. 
-     OpenSSL still tries to build a complete chain to a root but if an
-     intermediate CA has a trust setting included that is used. The first
-     setting is used: whether to trust (e.g., -addtrust option to the x509
-     utility) or reject.
-     [Steve Henson]
-
-  *) Add -trusted_first option which attempts to find certificates in the
-     trusted store even if an untrusted chain is also supplied.
-     [Steve Henson]
-
-  *) MIPS assembly pack updates: support for MIPS32r2 and SmartMIPS ASE,
-     platform support for Linux and Android.
-     [Andy Polyakov]
-
-  *) Support for linux-x32, ILP32 environment in x86_64 framework.
-     [Andy Polyakov]
-
-  *) Experimental multi-implementation support for FIPS capable OpenSSL.
-     When in FIPS mode the approved implementations are used as normal,
-     when not in FIPS mode the internal unapproved versions are used instead.
-     This means that the FIPS capable OpenSSL isn't forced to use the
-     (often lower perfomance) FIPS implementations outside FIPS mode.
-     [Steve Henson]
-
-  *) Transparently support X9.42 DH parameters when calling
-     PEM_read_bio_DHparameters. This means existing applications can handle
-     the new parameter format automatically.
-     [Steve Henson]
-
-  *) Initial experimental support for X9.42 DH parameter format: mainly
-     to support use of 'q' parameter for RFC5114 parameters.
-     [Steve Henson]
-
-  *) Add DH parameters from RFC5114 including test data to dhtest.
-     [Steve Henson]
-
-  *) Support for automatic EC temporary key parameter selection. If enabled
-     the most preferred EC parameters are automatically used instead of
-     hardcoded fixed parameters. Now a server just has to call:
-     SSL_CTX_set_ecdh_auto(ctx, 1) and the server will automatically
-     support ECDH and use the most appropriate parameters.
-     [Steve Henson]
-
-  *) Enhance and tidy EC curve and point format TLS extension code. Use
-     static structures instead of allocation if default values are used.
-     New ctrls to set curves we wish to support and to retrieve shared curves.
-     Print out shared curves in s_server. New options to s_server and s_client
-     to set list of supported curves.
-     [Steve Henson]
-
-  *) New ctrls to retrieve supported signature algorithms and 
-     supported curve values as an array of NIDs. Extend openssl utility
-     to print out received values.
-     [Steve Henson]
-
-  *) Add new APIs EC_curve_nist2nid and EC_curve_nid2nist which convert
-     between NIDs and the more common NIST names such as "P-256". Enhance
-     ecparam utility and ECC method to recognise the NIST names for curves.
-     [Steve Henson]
-
-  *) Enhance SSL/TLS certificate chain handling to support different
-     chains for each certificate instead of one chain in the parent SSL_CTX.
-     [Steve Henson]
-
-  *) Support for fixed DH ciphersuite client authentication: where both
-     server and client use DH certificates with common parameters.
-     [Steve Henson]
-
-  *) Support for fixed DH ciphersuites: those requiring DH server
-     certificates.
-     [Steve Henson]
-
-  *) New function i2d_re_X509_tbs for re-encoding the TBS portion of
-     the certificate.
-     Note: Related 1.0.2-beta specific macros X509_get_cert_info,
-     X509_CINF_set_modified, X509_CINF_get_issuer, X509_CINF_get_extensions and
-     X509_CINF_get_signature were reverted post internal team review.
-
- Changes between 1.0.1h and 1.0.1i [6 Aug 2014]
-
-  *) Fix SRP buffer overrun vulnerability. Invalid parameters passed to the
-     SRP code can be overrun an internal buffer. Add sanity check that
-     g, A, B < N to SRP code.
-
-     Thanks to Sean Devlin and Watson Ladd of Cryptography Services, NCC
-     Group for discovering this issue.
-     (CVE-2014-3512)
-     [Steve Henson]
-
-  *) A flaw in the OpenSSL SSL/TLS server code causes the server to negotiate
-     TLS 1.0 instead of higher protocol versions when the ClientHello message
-     is badly fragmented. This allows a man-in-the-middle attacker to force a
-     downgrade to TLS 1.0 even if both the server and the client support a
-     higher protocol version, by modifying the client's TLS records.
-
-     Thanks to David Benjamin and Adam Langley (Google) for discovering and
-     researching this issue.
-     (CVE-2014-3511)
-     [David Benjamin]
+ Changes between 1.0.0m and 1.0.0n [6 Aug 2014]

  *) OpenSSL DTLS clients enabling anonymous (EC)DH ciphersuites are subject
     to a denial of service attack. A malicious server can crash the client
@@ -381,16 +81,6 @@
     (CVE-2014-3509)
     [Gabor Tyukasz]

-  *) A malicious server can crash an OpenSSL client with a null pointer
-     dereference (read) by specifying an SRP ciphersuite even though it was not
-     properly negotiated with the client. This can be exploited through a
-     Denial of Service attack.
-
-     Thanks to Joonas Kuorilehto and Riku Hietam<61>ki (Codenomicon) for
-     discovering and researching this issue.
-     (CVE-2014-5139)
-     [Steve Henson]
-
  *) A flaw in OBJ_obj2txt may cause pretty printing functions such as
     X509_name_oneline, X509_name_print_ex et al. to leak some information
     from the stack. Applications may be affected if they echo pretty printing
@@ -405,7 +95,7 @@
     bogus results, with non-infinity inputs mapped to infinity too.)
     [Bodo Moeller]

- Changes between 1.0.1g and 1.0.1h [5 Jun 2014]
+ Changes between 1.0.0l and 1.0.0m [5 Jun 2014]

  *) Fix for SSL/TLS MITM flaw. An attacker using a carefully crafted
     handshake can force the use of weak keying material in OpenSSL
@@ -449,17 +139,6 @@
  *) Fix some double frees. These are not thought to be exploitable.
     [mancha <mancha1@zoho.com>]

- Changes between 1.0.1f and 1.0.1g [7 Apr 2014]
-
-  *) A missing bounds check in the handling of the TLS heartbeat extension
-     can be used to reveal up to 64k of memory to a connected client or
-     server.
-
-     Thanks for Neel Mehta of Google Security for discovering this bug and to
-     Adam Langley <agl@chromium.org> and Bodo Moeller <bmoeller@acm.org> for
-     preparing the fix (CVE-2014-0160)
-     [Adam Langley, Bodo Moeller]
-
  *) Fix for the attack described in the paper "Recovering OpenSSL
     ECDSA Nonces Using the FLUSH+RELOAD Cache Side-channel Attack"
     by Yuval Yarom and Naomi Benger. Details can be obtained from:
@@ -469,21 +148,7 @@
     flaw and to Yuval Yarom for supplying a fix (CVE-2014-0076)
     [Yuval Yarom and Naomi Benger]

-  *) TLS pad extension: draft-agl-tls-padding-03
-
-     Workaround for the "TLS hang bug" (see FAQ and PR#2771): if the
-     TLS client Hello record length value would otherwise be > 255 and
-     less that 512 pad with a dummy extension containing zeroes so it
-     is at least 512 bytes long.
-
-     [Adam Langley, Steve Henson]
-
- Changes between 1.0.1e and 1.0.1f [6 Jan 2014]
-
-  *) Fix for TLS record tampering bug. A carefully crafted invalid 
-     handshake could crash OpenSSL with a NULL pointer exception.
-     Thanks to Anton Johansson for reporting this issues.
-     (CVE-2013-4353)
+ Changes between 1.0.0k and 1.0.0l [6 Jan 2014]

  *) Keep original DTLS digest and encryption contexts in retransmission
     structures so we can use the previous session parameters if they need
@@ -498,410 +163,6 @@
     10.8..10.8.3 and forcing users to upgrade to 10.8.4 or newer.
     [Rob Stradling, Adam Langley]

- Changes between 1.0.1d and 1.0.1e [11 Feb 2013]
-
-  *) Correct fix for CVE-2013-0169. The original didn't work on AES-NI
-     supporting platforms or when small records were transferred.
-     [Andy Polyakov, Steve Henson]
-
- Changes between 1.0.1c and 1.0.1d [5 Feb 2013]
-
-  *) Make the decoding of SSLv3, TLS and DTLS CBC records constant time.
-
-     This addresses the flaw in CBC record processing discovered by 
-     Nadhem Alfardan and Kenny Paterson. Details of this attack can be found
-     at: http://www.isg.rhul.ac.uk/tls/     
-
-     Thanks go to Nadhem Alfardan and Kenny Paterson of the Information
-     Security Group at Royal Holloway, University of London
-     (www.isg.rhul.ac.uk) for discovering this flaw and Adam Langley and
-     Emilia K<>sper for the initial patch.
-     (CVE-2013-0169)
-     [Emilia K<>sper, Adam Langley, Ben Laurie, Andy Polyakov, Steve Henson]
-
-  *) Fix flaw in AESNI handling of TLS 1.2 and 1.1 records for CBC mode
-     ciphersuites which can be exploited in a denial of service attack.
-     Thanks go to and to Adam Langley <agl@chromium.org> for discovering
-     and detecting this bug and to Wolfgang Ettlinger
-     <wolfgang.ettlinger@gmail.com> for independently discovering this issue.
-     (CVE-2012-2686)
-     [Adam Langley]
-
-  *) Return an error when checking OCSP signatures when key is NULL.
-     This fixes a DoS attack. (CVE-2013-0166)
-     [Steve Henson]
-
-  *) Make openssl verify return errors.
-     [Chris Palmer <palmer@google.com> and Ben Laurie]
-
-  *) Call OCSP Stapling callback after ciphersuite has been chosen, so
-     the right response is stapled. Also change SSL_get_certificate()
-     so it returns the certificate actually sent.
-     See http://rt.openssl.org/Ticket/Display.html?id=2836.
-     [Rob Stradling <rob.stradling@comodo.com>]
-
-  *) Fix possible deadlock when decoding public keys.
-     [Steve Henson]
-
-  *) Don't use TLS 1.0 record version number in initial client hello
-     if renegotiating.
-     [Steve Henson]
-
- Changes between 1.0.1b and 1.0.1c [10 May 2012]
-
-  *) Sanity check record length before skipping explicit IV in TLS
-     1.2, 1.1 and DTLS to fix DoS attack.
-
-     Thanks to Codenomicon for discovering this issue using Fuzz-o-Matic
-     fuzzing as a service testing platform.
-     (CVE-2012-2333)
-     [Steve Henson]
-
-  *) Initialise tkeylen properly when encrypting CMS messages.
-     Thanks to Solar Designer of Openwall for reporting this issue.
-     [Steve Henson]
-
-  *) In FIPS mode don't try to use composite ciphers as they are not
-     approved.
-     [Steve Henson]
-
- Changes between 1.0.1a and 1.0.1b [26 Apr 2012]
-
-  *) OpenSSL 1.0.0 sets SSL_OP_ALL to 0x80000FFFL and OpenSSL 1.0.1 and
-     1.0.1a set SSL_OP_NO_TLSv1_1 to 0x00000400L which would unfortunately
-     mean any application compiled against OpenSSL 1.0.0 headers setting
-     SSL_OP_ALL would also set SSL_OP_NO_TLSv1_1, unintentionally disablng
-     TLS 1.1 also. Fix this by changing the value of SSL_OP_NO_TLSv1_1 to
-     0x10000000L Any application which was previously compiled against
-     OpenSSL 1.0.1 or 1.0.1a headers and which cares about SSL_OP_NO_TLSv1_1
-     will need to be recompiled as a result. Letting be results in
-     inability to disable specifically TLS 1.1 and in client context,
-     in unlike event, limit maximum offered version to TLS 1.0 [see below].
-     [Steve Henson]
-
-  *) In order to ensure interoperabilty SSL_OP_NO_protocolX does not
-     disable just protocol X, but all protocols above X *if* there are
-     protocols *below* X still enabled. In more practical terms it means
-     that if application wants to disable TLS1.0 in favor of TLS1.1 and
-     above, it's not sufficient to pass SSL_OP_NO_TLSv1, one has to pass
-     SSL_OP_NO_TLSv1|SSL_OP_NO_SSLv3|SSL_OP_NO_SSLv2. This applies to
-     client side.
-     [Andy Polyakov]
-
- Changes between 1.0.1 and 1.0.1a [19 Apr 2012]
-
-  *) Check for potentially exploitable overflows in asn1_d2i_read_bio
-     BUF_mem_grow and BUF_mem_grow_clean. Refuse attempts to shrink buffer
-     in CRYPTO_realloc_clean.
-
-     Thanks to Tavis Ormandy, Google Security Team, for discovering this
-     issue and to Adam Langley <agl@chromium.org> for fixing it.
-     (CVE-2012-2110)
-     [Adam Langley (Google), Tavis Ormandy, Google Security Team]
-
-  *) Don't allow TLS 1.2 SHA-256 ciphersuites in TLS 1.0, 1.1 connections.
-     [Adam Langley]
-
-  *) Workarounds for some broken servers that "hang" if a client hello
-     record length exceeds 255 bytes.
-
-     1. Do not use record version number > TLS 1.0 in initial client
-        hello: some (but not all) hanging servers will now work.
-     2. If we set OPENSSL_MAX_TLS1_2_CIPHER_LENGTH this will truncate
-	the number of ciphers sent in the client hello. This should be
-        set to an even number, such as 50, for example by passing:
-        -DOPENSSL_MAX_TLS1_2_CIPHER_LENGTH=50 to config or Configure.
-        Most broken servers should now work.
-     3. If all else fails setting OPENSSL_NO_TLS1_2_CLIENT will disable
-	TLS 1.2 client support entirely.
-     [Steve Henson]
-
-  *) Fix SEGV in Vector Permutation AES module observed in OpenSSH.
-     [Andy Polyakov]
-
- Changes between 1.0.0h and 1.0.1  [14 Mar 2012]
-
-  *) Add compatibility with old MDC2 signatures which use an ASN1 OCTET
-     STRING form instead of a DigestInfo.
-     [Steve Henson]
-
-  *) The format used for MDC2 RSA signatures is inconsistent between EVP
-     and the RSA_sign/RSA_verify functions. This was made more apparent when
-     OpenSSL used RSA_sign/RSA_verify for some RSA signatures in particular
-     those which went through EVP_PKEY_METHOD in 1.0.0 and later. Detect 
-     the correct format in RSA_verify so both forms transparently work.
-     [Steve Henson]
-
-  *) Some servers which support TLS 1.0 can choke if we initially indicate
-     support for TLS 1.2 and later renegotiate using TLS 1.0 in the RSA
-     encrypted premaster secret. As a workaround use the maximum pemitted
-     client version in client hello, this should keep such servers happy
-     and still work with previous versions of OpenSSL.
-     [Steve Henson]
-
-  *) Add support for TLS/DTLS heartbeats.
-     [Robin Seggelmann <seggelmann@fh-muenster.de>]
-
-  *) Add support for SCTP.
-     [Robin Seggelmann <seggelmann@fh-muenster.de>]
-
-  *) Improved PRNG seeding for VOS.
-     [Paul Green <Paul.Green@stratus.com>]
-
-  *) Extensive assembler packs updates, most notably:
-
-	- x86[_64]:     AES-NI, PCLMULQDQ, RDRAND support;
-	- x86[_64]:     SSSE3 support (SHA1, vector-permutation AES);
-	- x86_64:       bit-sliced AES implementation;
-	- ARM:          NEON support, contemporary platforms optimizations;
-	- s390x:        z196 support;
-	- *:            GHASH and GF(2^m) multiplication implementations;
-
-     [Andy Polyakov]
-
-  *) Make TLS-SRP code conformant with RFC 5054 API cleanup
-     (removal of unnecessary code)
-     [Peter Sylvester <peter.sylvester@edelweb.fr>]
-
-  *) Add TLS key material exporter from RFC 5705.
-     [Eric Rescorla]
-
-  *) Add DTLS-SRTP negotiation from RFC 5764.
-     [Eric Rescorla]
-
-  *) Add Next Protocol Negotiation,
-     http://tools.ietf.org/html/draft-agl-tls-nextprotoneg-00. Can be
-     disabled with a no-npn flag to config or Configure. Code donated
-     by Google.
-     [Adam Langley <agl@google.com> and Ben Laurie]
-
-  *) Add optional 64-bit optimized implementations of elliptic curves NIST-P224,
-     NIST-P256, NIST-P521, with constant-time single point multiplication on
-     typical inputs. Compiler support for the nonstandard type __uint128_t is
-     required to use this (present in gcc 4.4 and later, for 64-bit builds).
-     Code made available under Apache License version 2.0.
-
-     Specify "enable-ec_nistp_64_gcc_128" on the Configure (or config) command
-     line to include this in your build of OpenSSL, and run "make depend" (or
-     "make update"). This enables the following EC_METHODs:
-
-         EC_GFp_nistp224_method()
-         EC_GFp_nistp256_method()
-         EC_GFp_nistp521_method()
-
-     EC_GROUP_new_by_curve_name() will automatically use these (while
-     EC_GROUP_new_curve_GFp() currently prefers the more flexible
-     implementations).
-     [Emilia K<>sper, Adam Langley, Bodo Moeller (Google)]
-
-  *) Use type ossl_ssize_t instad of ssize_t which isn't available on
-     all platforms. Move ssize_t definition from e_os.h to the public
-     header file e_os2.h as it now appears in public header file cms.h
-     [Steve Henson]
-
-  *) New -sigopt option to the ca, req and x509 utilities. Additional
-     signature parameters can be passed using this option and in
-     particular PSS. 
-     [Steve Henson]
-
-  *) Add RSA PSS signing function. This will generate and set the
-     appropriate AlgorithmIdentifiers for PSS based on those in the
-     corresponding EVP_MD_CTX structure. No application support yet.
-     [Steve Henson]
-
-  *) Support for companion algorithm specific ASN1 signing routines.
-     New function ASN1_item_sign_ctx() signs a pre-initialised
-     EVP_MD_CTX structure and sets AlgorithmIdentifiers based on
-     the appropriate parameters.
-     [Steve Henson]
-
-  *) Add new algorithm specific ASN1 verification initialisation function
-     to EVP_PKEY_ASN1_METHOD: this is not in EVP_PKEY_METHOD since the ASN1
-     handling will be the same no matter what EVP_PKEY_METHOD is used.
-     Add a PSS handler to support verification of PSS signatures: checked
-     against a number of sample certificates.
-     [Steve Henson]
-
-  *) Add signature printing for PSS. Add PSS OIDs.
-     [Steve Henson, Martin Kaiser <lists@kaiser.cx>]
-
-  *) Add algorithm specific signature printing. An individual ASN1 method
-     can now print out signatures instead of the standard hex dump. 
-
-     More complex signatures (e.g. PSS) can print out more meaningful
-     information. Include DSA version that prints out the signature
-     parameters r, s.
-     [Steve Henson]
-
-  *) Password based recipient info support for CMS library: implementing
-     RFC3211.
-     [Steve Henson]
-
-  *) Split password based encryption into PBES2 and PBKDF2 functions. This
-     neatly separates the code into cipher and PBE sections and is required
-     for some algorithms that split PBES2 into separate pieces (such as
-     password based CMS).
-     [Steve Henson]
-
-  *) Session-handling fixes:
-     - Fix handling of connections that are resuming with a session ID,
-       but also support Session Tickets.
-     - Fix a bug that suppressed issuing of a new ticket if the client
-       presented a ticket with an expired session.
-     - Try to set the ticket lifetime hint to something reasonable.
-     - Make tickets shorter by excluding irrelevant information.
-     - On the client side, don't ignore renewed tickets.
-     [Adam Langley, Bodo Moeller (Google)]
-
-  *) Fix PSK session representation.
-     [Bodo Moeller]
-
-  *) Add RC4-MD5 and AESNI-SHA1 "stitched" implementations.
-
-     This work was sponsored by Intel.
-     [Andy Polyakov]
-
-  *) Add GCM support to TLS library. Some custom code is needed to split
-     the IV between the fixed (from PRF) and explicit (from TLS record)
-     portions. This adds all GCM ciphersuites supported by RFC5288 and 
-     RFC5289. Generalise some AES* cipherstrings to inlclude GCM and
-     add a special AESGCM string for GCM only.
-     [Steve Henson]
-
-  *) Expand range of ctrls for AES GCM. Permit setting invocation
-     field on decrypt and retrieval of invocation field only on encrypt.
-     [Steve Henson]
-
-  *) Add HMAC ECC ciphersuites from RFC5289. Include SHA384 PRF support.
-     As required by RFC5289 these ciphersuites cannot be used if for
-     versions of TLS earlier than 1.2.
-     [Steve Henson]
-
-  *) For FIPS capable OpenSSL interpret a NULL default public key method
-     as unset and return the appopriate default but do *not* set the default.
-     This means we can return the appopriate method in applications that
-     swicth between FIPS and non-FIPS modes.
-     [Steve Henson]
-
-  *) Redirect HMAC and CMAC operations to FIPS module in FIPS mode. If an
-     ENGINE is used then we cannot handle that in the FIPS module so we
-     keep original code iff non-FIPS operations are allowed.
-     [Steve Henson]
-
-  *) Add -attime option to openssl utilities.
-     [Peter Eckersley <pde@eff.org>, Ben Laurie and Steve Henson]
-
-  *) Redirect DSA and DH operations to FIPS module in FIPS mode.
-     [Steve Henson]
-
-  *) Redirect ECDSA and ECDH operations to FIPS module in FIPS mode. Also use
-     FIPS EC methods unconditionally for now.
-     [Steve Henson]
-
-  *) New build option no-ec2m to disable characteristic 2 code.
-     [Steve Henson]
-
-  *) Backport libcrypto audit of return value checking from 1.1.0-dev; not
-     all cases can be covered as some introduce binary incompatibilities.
-     [Steve Henson]
-
-  *) Redirect RSA operations to FIPS module including keygen,
-     encrypt, decrypt, sign and verify. Block use of non FIPS RSA methods.
-     [Steve Henson]
-
-  *) Add similar low level API blocking to ciphers.
-     [Steve Henson]
-
-  *) Low level digest APIs are not approved in FIPS mode: any attempt
-     to use these will cause a fatal error. Applications that *really* want
-     to use them can use the private_* version instead.
-     [Steve Henson]
-
-  *) Redirect cipher operations to FIPS module for FIPS builds. 
-     [Steve Henson]
-
-  *) Redirect digest operations to FIPS module for FIPS builds. 
-     [Steve Henson]
-
-  *) Update build system to add "fips" flag which will link in fipscanister.o
-     for static and shared library builds embedding a signature if needed.
-     [Steve Henson]
-
-  *) Output TLS supported curves in preference order instead of numerical
-     order. This is currently hardcoded for the highest order curves first.
-     This should be configurable so applications can judge speed vs strength.
-     [Steve Henson]
-
-  *) Add TLS v1.2 server support for client authentication. 
-     [Steve Henson]
-
-  *) Add support for FIPS mode in ssl library: disable SSLv3, non-FIPS ciphers
-     and enable MD5.
-     [Steve Henson]
-
-  *) Functions FIPS_mode_set() and FIPS_mode() which call the underlying
-     FIPS modules versions.
-     [Steve Henson]
-
-  *) Add TLS v1.2 client side support for client authentication. Keep cache
-     of handshake records longer as we don't know the hash algorithm to use
-     until after the certificate request message is received.
-     [Steve Henson]
-
-  *) Initial TLS v1.2 client support. Add a default signature algorithms
-     extension including all the algorithms we support. Parse new signature
-     format in client key exchange. Relax some ECC signing restrictions for
-     TLS v1.2 as indicated in RFC5246.
-     [Steve Henson]
-
-  *) Add server support for TLS v1.2 signature algorithms extension. Switch
-     to new signature format when needed using client digest preference.
-     All server ciphersuites should now work correctly in TLS v1.2. No client
-     support yet and no support for client certificates.
-     [Steve Henson]
-
-  *) Initial TLS v1.2 support. Add new SHA256 digest to ssl code, switch
-     to SHA256 for PRF when using TLS v1.2 and later. Add new SHA256 based
-     ciphersuites. At present only RSA key exchange ciphersuites work with
-     TLS v1.2. Add new option for TLS v1.2 replacing the old and obsolete
-     SSL_OP_PKCS1_CHECK flags with SSL_OP_NO_TLSv1_2. New TLSv1.2 methods
-     and version checking.
-     [Steve Henson]
-
-  *) New option OPENSSL_NO_SSL_INTERN. If an application can be compiled
-     with this defined it will not be affected by any changes to ssl internal
-     structures. Add several utility functions to allow openssl application
-     to work with OPENSSL_NO_SSL_INTERN defined.
-     [Steve Henson]
-
-  *) Add SRP support.
-     [Tom Wu <tjw@cs.stanford.edu> and Ben Laurie]
-
-  *) Add functions to copy EVP_PKEY_METHOD and retrieve flags and id.
-     [Steve Henson]
-
-  *) Permit abbreviated handshakes when renegotiating using the function
-     SSL_renegotiate_abbreviated().
-     [Robin Seggelmann <seggelmann@fh-muenster.de>]
-
-  *) Add call to ENGINE_register_all_complete() to
-     ENGINE_load_builtin_engines(), so some implementations get used
-     automatically instead of needing explicit application support.
-     [Steve Henson]
-
-  *) Add support for TLS key exporter as described in RFC5705.
-     [Robin Seggelmann <seggelmann@fh-muenster.de>, Steve Henson]
-
-  *) Initial TLSv1.1 support. Since TLSv1.1 is very similar to TLS v1.0 only
-     a few changes are required:
-
-       Add SSL_OP_NO_TLSv1_1 flag.
-       Add TLSv1_1 methods.
-       Update version checking logic to handle version 1.1.
-       Add explicit IV handling (ported from DTLS code).
-       Add command line options to s_client/s_server.
-     [Steve Henson]
-
 Changes between 1.0.0j and 1.0.0k [5 Feb 2013]

  *) Make the decoding of SSLv3, TLS and DTLS CBC records constant time.
--- a/340
+++ b/340
@@ -10,7 +10,7 @@ use strict;

 # see INSTALL for instructions.

-my $usage="Usage: Configure [no-<cipher> ...] [enable-<cipher> ...] [experimental-<cipher> ...] [-Dxxx] [-lxxx] [-Lxxx] [-fxxx] [-Kxxx] [no-hw-xxx|no-hw] [[no-]threads] [[no-]shared] [[no-]zlib|zlib-dynamic] [no-asm] [no-dso] [no-krb5] [sctp] [386] [--prefix=DIR] [--openssldir=OPENSSLDIR] [--with-xxx[=vvv]] [--test-sanity] os/compiler[:flags]\n";
+my $usage="Usage: Configure [no-<cipher> ...] [enable-<cipher> ...] [experimental-<cipher> ...] [-Dxxx] [-lxxx] [-Lxxx] [-fxxx] [-Kxxx] [no-hw-xxx|no-hw] [[no-]threads] [[no-]shared] [[no-]zlib|zlib-dynamic] [no-asm] [no-dso] [no-krb5] [386] [--prefix=DIR] [--openssldir=OPENSSLDIR] [--with-xxx[=vvv]] [--test-sanity] os/compiler[:flags]\n";

 # Options:
 #
@@ -56,7 +56,6 @@ my $usage="Usage: Configure [no-<cipher> ...] [enable-<cipher> ...] [experimenta
 # [no-]zlib     [don't] compile support for zlib compression.
 # zlib-dynamic	Like "zlib", but the zlib library is expected to be a shared
 #		library and will be loaded in run-time by the OpenSSL library.
-# sctp          include SCTP support
 # 386           generate 80386 code
 # no-sse2	disables IA-32 SSE2 code, above option implies no-sse2
 # no-<cipher>   build without specified algorithm (rsa, idea, rc5, ...)
@@ -124,25 +123,21 @@ my $tlib="-lnsl -lsocket";
 my $bits1="THIRTY_TWO_BIT ";
 my $bits2="SIXTY_FOUR_BIT ";

-my $x86_asm="x86cpuid.o:bn-586.o co-586.o x86-mont.o x86-gf2m.o::des-586.o crypt586.o:aes-586.o vpaes-x86.o aesni-x86.o:bf-586.o:md5-586.o:sha1-586.o sha256-586.o sha512-586.o:cast-586.o:rc4-586.o:rmd-586.o:rc5-586.o:wp_block.o wp-mmx.o:cmll-x86.o:ghash-x86.o:";
+my $x86_asm="x86cpuid.o:bn-586.o co-586.o x86-mont.o:des-586.o crypt586.o:aes-586.o:bf-586.o:md5-586.o:sha1-586.o sha256-586.o sha512-586.o:cast-586.o:rc4-586.o:rmd-586.o:rc5-586.o:wp_block.o wp-mmx.o:cmll-x86.o";

 my $x86_elf_asm="$x86_asm:elf";

-my $x86_64_asm="x86_64cpuid.o:x86_64-gcc.o x86_64-mont.o x86_64-mont5.o x86_64-gf2m.o rsaz_exp.o rsaz-x86_64.o rsaz-avx2.o:ecp_nistz256.o ecp_nistz256-x86_64.o::aes-x86_64.o vpaes-x86_64.o bsaes-x86_64.o aesni-x86_64.o aesni-sha1-x86_64.o aesni-sha256-x86_64.o aesni-mb-x86_64.o::md5-x86_64.o:sha1-x86_64.o sha256-x86_64.o sha512-x86_64.o sha1-mb-x86_64.o sha256-mb-x86_64.o::rc4-x86_64.o rc4-md5-x86_64.o:::wp-x86_64.o:cmll-x86_64.o cmll_misc.o:ghash-x86_64.o aesni-gcm-x86_64.o:";
-my $ia64_asm="ia64cpuid.o:bn-ia64.o ia64-mont.o:::aes_core.o aes_cbc.o aes-ia64.o::md5-ia64.o:sha1-ia64.o sha256-ia64.o sha512-ia64.o::rc4-ia64.o rc4_skey.o:::::ghash-ia64.o::void";
-my $sparcv9_asm="sparcv9cap.o sparccpuid.o:bn-sparcv9.o sparcv9-mont.o sparcv9a-mont.o vis3-mont.o sparct4-mont.o sparcv9-gf2m.o::des_enc-sparc.o fcrypt_b.o dest4-sparcv9.o:aes_core.o aes_cbc.o aes-sparcv9.o aest4-sparcv9.o::md5-sparcv9.o:sha1-sparcv9.o sha256-sparcv9.o sha512-sparcv9.o::::::camellia.o cmll_misc.o cmll_cbc.o cmllt4-sparcv9.o:ghash-sparcv9.o::void";
-my $sparcv8_asm=":sparcv8.o::des_enc-sparc.o fcrypt_b.o:::::::::::::void";
-my $alpha_asm="alphacpuid.o:bn_asm.o alpha-mont.o::::::sha1-alpha.o:::::::ghash-alpha.o::void";
-my $mips64_asm=":bn-mips.o mips-mont.o:::aes_cbc.o aes-mips.o:::sha1-mips.o sha256-mips.o sha512-mips.o::::::::";
-my $mips32_asm=$mips64_asm; $mips32_asm =~ s/\s*sha512\-mips\.o//;
-my $s390x_asm="s390xcap.o s390xcpuid.o:bn-s390x.o s390x-mont.o s390x-gf2m.o:::aes-s390x.o aes-ctr.o aes-xts.o:::sha1-s390x.o sha256-s390x.o sha512-s390x.o::rc4-s390x.o:::::ghash-s390x.o:";
-my $armv4_asm="armcap.o armv4cpuid.o:bn_asm.o armv4-mont.o armv4-gf2m.o:::aes_cbc.o aes-armv4.o bsaes-armv7.o aesv8-armx.o:::sha1-armv4-large.o sha256-armv4.o sha512-armv4.o:::::::ghash-armv4.o ghashv8-armx.o::void";
-my $aarch64_asm="armcap.o arm64cpuid.o mem_clr.o::::aes_core.o aes_cbc.o aesv8-armx.o:::sha1-armv8.o sha256-armv8.o sha512-armv8.o:::::::ghashv8-armx.o:";
-my $parisc11_asm="pariscid.o:bn_asm.o parisc-mont.o:::aes_core.o aes_cbc.o aes-parisc.o:::sha1-parisc.o sha256-parisc.o sha512-parisc.o::rc4-parisc.o:::::ghash-parisc.o::32";
-my $parisc20_asm="pariscid.o:pa-risc2W.o parisc-mont.o:::aes_core.o aes_cbc.o aes-parisc.o:::sha1-parisc.o sha256-parisc.o sha512-parisc.o::rc4-parisc.o:::::ghash-parisc.o::64";
-my $ppc64_asm="ppccpuid.o ppccap.o:bn-ppc.o ppc-mont.o ppc64-mont.o:::aes_core.o aes_cbc.o aes-ppc.o vpaes-ppc.o aesp8-ppc.o:::sha1-ppc.o sha256-ppc.o sha512-ppc.o sha256p8-ppc.o sha512p8-ppc.o:::::::ghashp8-ppc.o:";
-my $ppc32_asm=$ppc64_asm;
-my $no_asm="::::::::::::::::void";
+my $x86_64_asm="x86_64cpuid.o:x86_64-gcc.o x86_64-mont.o::aes-x86_64.o::md5-x86_64.o:sha1-x86_64.o sha256-x86_64.o sha512-x86_64.o::rc4-x86_64.o:::wp-x86_64.o:cmll-x86_64.o cmll_misc.o";
+my $ia64_asm="ia64cpuid.o:bn-ia64.o::aes_core.o aes_cbc.o aes-ia64.o::md5-ia64.o:sha1-ia64.o sha256-ia64.o sha512-ia64.o::rc4-ia64.o rc4_skey.o:::::void";
+my $sparcv9_asm="sparcv9cap.o sparccpuid.o:bn-sparcv9.o sparcv9-mont.o sparcv9a-mont.o:des_enc-sparc.o fcrypt_b.o:aes_core.o aes_cbc.o aes-sparcv9.o:::sha1-sparcv9.o sha256-sparcv9.o sha512-sparcv9.o:::::::void";
+my $sparcv8_asm=":sparcv8.o:des_enc-sparc.o fcrypt_b.o:::::::::::void";
+my $alpha_asm="alphacpuid.o:bn_asm.o alpha-mont.o::::::::::::void";
+my $mips3_asm=":bn-mips3.o::::::::::::void";
+my $s390x_asm="s390xcap.o s390xcpuid.o:bn-s390x.o s390x-mont.o::aes-s390x.o:::sha1-s390x.o sha256-s390x.o sha512-s390x.o::rc4-s390x.o:::::void";
+my $armv4_asm=":bn_asm.o armv4-mont.o::aes_cbc.o aes-armv4.o:::sha1-armv4-large.o sha256-armv4.o sha512-armv4.o:::::::void";
+my $ppc32_asm="ppccpuid.o:bn-ppc.o::aes_core.o aes_cbc.o aes-ppc.o:::sha1-ppc.o sha256-ppc.o::::::";
+my $ppc64_asm="ppccpuid.o:bn-ppc.o ppc-mont.o::aes_core.o aes_cbc.o aes-ppc.o:::sha1-ppc.o sha256-ppc.o sha512-ppc.o::::::";
+my $no_asm=":::::::::::::void";

 # As for $BSDthreads. Idea is to maintain "collective" set of flags,
 # which would cover all BSD flavors. -pthread applies to them all, 
@@ -153,7 +148,7 @@ my $no_asm="::::::::::::::::void";
 # seems to be sufficient?
 my $BSDthreads="-pthread -D_THREAD_SAFE -D_REENTRANT";

-#config-string	$cc : $cflags : $unistd : $thread_cflag : $sys_id : $lflags : $bn_ops : $cpuid_obj : $bn_obj : $ec_obj : $des_obj : $aes_obj : $bf_obj : $md5_obj : $sha1_obj : $cast_obj : $rc4_obj : $rmd160_obj : $rc5_obj : $wp_obj : $cmll_obj : $modes_obj : $engines_obj : $dso_scheme : $shared_target : $shared_cflag : $shared_ldflag : $shared_extension : $ranlib : $arflags : $multilib
+#config-string	$cc : $cflags : $unistd : $thread_cflag : $sys_id : $lflags : $bn_ops : $cpuid_obj : $bn_obj : $des_obj : $aes_obj : $bf_obj : $md5_obj : $sha1_obj : $cast_obj : $rc4_obj : $rmd160_obj : $rc5_obj : $wp_obj : $cmll_obj : $dso_scheme : $shared_target : $shared_cflag : $shared_ldflag : $shared_extension : $ranlib : $arflags : $multilib

 my %table=(
 # File 'TABLE' (created by 'make TABLE') contains the data from this list,
@@ -168,37 +163,33 @@ my %table=(
 # Our development configs
 "purify",	"purify gcc:-g -DPURIFY -Wall::(unknown)::-lsocket -lnsl::::",
 "debug",	"gcc:-DBN_DEBUG -DREF_CHECK -DCONF_DEBUG -DBN_CTX_DEBUG -DCRYPTO_MDEBUG -DOPENSSL_NO_ASM -ggdb -g2 -Wformat -Wshadow -Wmissing-prototypes -Wmissing-declarations -Werror::(unknown)::-lefence::::",
-"debug-ben",	"gcc:$gcc_devteam_warn -DBN_DEBUG -DREF_CHECK -DCONF_DEBUG -DBN_CTX_DEBUG -DCRYPTO_MDEBUG -DDEBUG_SAFESTACK -O2 -pipe::(unknown):::::",
+"debug-ben",	"gcc:-DBN_DEBUG -DREF_CHECK -DCONF_DEBUG -DBN_CTX_DEBUG -DCRYPTO_MDEBUG -DPEDANTIC -DDEBUG_SAFESTACK -DDEBUG_UNUSED -O2 -pedantic -Wall -Wshadow -Werror -pipe::(unknown):::::bn86-elf.o co86-elf.o",
 "debug-ben-openbsd","gcc:-DBN_DEBUG -DREF_CHECK -DCONF_DEBUG -DBN_CTX_DEBUG -DCRYPTO_MDEBUG -DPEDANTIC -DDEBUG_SAFESTACK -DOPENSSL_OPENBSD_DEV_CRYPTO -DOPENSSL_NO_ASM -O2 -pedantic -Wall -Wshadow -Werror -pipe::(unknown)::::",
 "debug-ben-openbsd-debug","gcc:-DBN_DEBUG -DREF_CHECK -DCONF_DEBUG -DBN_CTX_DEBUG -DCRYPTO_MDEBUG -DPEDANTIC -DDEBUG_SAFESTACK -DOPENSSL_OPENBSD_DEV_CRYPTO -DOPENSSL_NO_ASM -g3 -O2 -pedantic -Wall -Wshadow -Werror -pipe::(unknown)::::",
 "debug-ben-debug",	"gcc44:$gcc_devteam_warn -DBN_DEBUG -DCONF_DEBUG -DDEBUG_SAFESTACK -DDEBUG_UNUSED -g3 -O2 -pipe::(unknown)::::::",
-"debug-ben-debug-64",	"gcc:$gcc_devteam_warn -Wno-error=overlength-strings -DBN_DEBUG -DCONF_DEBUG -DDEBUG_SAFESTACK -DDEBUG_UNUSED -g3 -O3 -pipe::${BSDthreads}:::SIXTY_FOUR_BIT_LONG RC4_CHUNK DES_INT DES_UNROLL:${x86_64_asm}:elf:dlfcn:bsd-gcc-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
-"debug-ben-macos",	"cc:$gcc_devteam_warn -arch i386 -DBN_DEBUG -DCONF_DEBUG -DDEBUG_SAFESTACK -DDEBUG_UNUSED -DOPENSSL_THREADS -D_REENTRANT -DDSO_DLFCN -DHAVE_DLFCN_H -O3 -DL_ENDIAN -g3 -pipe::(unknown)::-Wl,-search_paths_first::::",
-"debug-ben-macos-gcc46",	"gcc-mp-4.6:$gcc_devteam_warn -Wconversion -DBN_DEBUG -DCONF_DEBUG -DDEBUG_SAFESTACK -DDEBUG_UNUSED -DOPENSSL_THREADS -D_REENTRANT -DDSO_DLFCN -DHAVE_DLFCN_H -O3 -DL_ENDIAN -g3 -pipe::(unknown)::::::",
-"debug-ben-darwin64","cc:$gcc_devteam_warn -g -Wno-language-extension-token -Wno-extended-offsetof -arch x86_64 -O3 -DL_ENDIAN -Wall::-D_REENTRANT:MACOSX:-Wl,-search_paths_first%:SIXTY_FOUR_BIT_LONG RC4_CHAR RC4_CHUNK DES_INT DES_UNROLL:".eval{my $asm=$x86_64_asm;$asm=~s/rc4\-[^:]+//;$asm}.":macosx:dlfcn:darwin-shared:-fPIC -fno-common:-arch x86_64 -dynamiclib:.\$(SHLIB_MAJOR).\$(SHLIB_MINOR).dylib",
-"debug-ben-debug-64-clang",	"clang:$gcc_devteam_warn -Wno-error=overlength-strings -Wno-error=extended-offsetof -Qunused-arguments -DBN_DEBUG -DCONF_DEBUG -DDEBUG_SAFESTACK -DDEBUG_UNUSED -g3 -O3 -pipe::${BSDthreads}:::SIXTY_FOUR_BIT_LONG RC4_CHUNK DES_INT DES_UNROLL:${x86_64_asm}:elf:dlfcn:bsd-gcc-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
+"debug-ben-debug-64",	"gcc:$gcc_devteam_warn -Wno-error=overlength-strings -Wno-error=strict-aliasing -Wno-error=uninitialized -DBN_DEBUG -DCONF_DEBUG -DDEBUG_SAFESTACK -DDEBUG_UNUSED -g3 -O3 -pipe::${BSDthreads}:::SIXTY_FOUR_BIT_LONG RC4_CHUNK DES_INT DES_UNROLL:${x86_64_asm}:elf:dlfcn:bsd-gcc-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
 "debug-ben-no-opt",	"gcc: -Wall -Wmissing-prototypes -Wstrict-prototypes -Wmissing-declarations -DDEBUG_SAFESTACK -DCRYPTO_MDEBUG -Werror -DL_ENDIAN -DTERMIOS -Wall -g3::(unknown)::::::",
 "debug-ben-strict",	"gcc:-DBN_DEBUG -DREF_CHECK -DCONF_DEBUG -DBN_CTX_DEBUG -DCRYPTO_MDEBUG -DCONST_STRICT -O2 -Wall -Wshadow -Werror -Wpointer-arith -Wcast-qual -Wwrite-strings -pipe::(unknown)::::::",
 "debug-rse","cc:-DTERMIOS -DL_ENDIAN -pipe -O -g -ggdb3 -Wall::(unknown):::BN_LLONG ${x86_gcc_des} ${x86_gcc_opts}:${x86_elf_asm}",
 "debug-bodo",	"gcc:$gcc_devteam_warn -Wno-error=overlength-strings -DBN_DEBUG -DBN_DEBUG_RAND -DCONF_DEBUG -DBIO_PAIR_DEBUG -m64 -DL_ENDIAN -DTERMIO -g -DMD32_REG_T=int::-D_REENTRANT::-ldl:SIXTY_FOUR_BIT_LONG RC4_CHUNK DES_INT DES_UNROLL:${x86_64_asm}:elf:dlfcn:linux-shared:-fPIC:-m64:.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR):::64",
 "debug-ulf", "gcc:-DTERMIOS -DL_ENDIAN -march=i486 -Wall -DBN_DEBUG -DBN_DEBUG_RAND -DREF_CHECK -DCONF_DEBUG -DBN_CTX_DEBUG -DCRYPTO_MDEBUG -DOPENSSL_NO_ASM -g -Wformat -Wshadow -Wmissing-prototypes -Wmissing-declarations:::CYGWIN32:::${no_asm}:win32:cygwin-shared:::.dll",
-"debug-steve64", "gcc:$gcc_devteam_warn -m64 -DL_ENDIAN -DTERMIO -DCONF_DEBUG -DDEBUG_SAFESTACK -Wno-overlength-strings -g::-D_REENTRANT::-ldl:SIXTY_FOUR_BIT_LONG RC4_CHUNK DES_INT DES_UNROLL:${x86_64_asm}:elf:dlfcn:linux-shared:-fPIC:-m64:.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
-"debug-steve32", "gcc:$gcc_devteam_warn -m32 -DL_ENDIAN -DCONF_DEBUG -DDEBUG_SAFESTACK -Wno-overlength-strings -g -pipe::-D_REENTRANT::-rdynamic -ldl:BN_LLONG ${x86_gcc_des} ${x86_gcc_opts}:${x86_elf_asm}:dlfcn:linux-shared:-fPIC:-m32:.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
-"debug-steve-opt", "gcc:$gcc_devteam_warn -m64 -O3 -DL_ENDIAN -DTERMIO -DCONF_DEBUG -DDEBUG_SAFESTACK -g::-D_REENTRANT::-ldl:SIXTY_FOUR_BIT_LONG RC4_CHUNK DES_INT DES_UNROLL:${x86_64_asm}:elf:dlfcn:linux-shared:-fPIC:-m64:.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
+"debug-steve64", "gcc:$gcc_devteam_warn -m64 -DL_ENDIAN -DTERMIO -DCONF_DEBUG -DDEBUG_SAFESTACK -g -DMD32_REG_T=int::-D_REENTRANT::-ldl:SIXTY_FOUR_BIT_LONG RC4_CHUNK DES_INT DES_UNROLL:${x86_64_asm}:elf:dlfcn:linux-shared:-fPIC:-m64:.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
+"debug-steve32", "gcc:$gcc_devteam_warn -m32 -DL_ENDIAN -DCONF_DEBUG -DDEBUG_SAFESTACK -g -pipe::-D_REENTRANT::-rdynamic -ldl:BN_LLONG ${x86_gcc_des} ${x86_gcc_opts}:${x86_elf_asm}:dlfcn:linux-shared:-fPIC:-m32:.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
+"debug-steve-opt", "gcc:$gcc_devteam_warn -m64 -O3 -DL_ENDIAN -DTERMIO -DCONF_DEBUG -DDEBUG_SAFESTACK -g -DMD32_REG_T=int::-D_REENTRANT::-ldl:SIXTY_FOUR_BIT_LONG RC4_CHUNK DES_INT DES_UNROLL:${x86_64_asm}:elf:dlfcn:linux-shared:-fPIC:-m64:.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
 "debug-levitte-linux-elf","gcc:-DLEVITTE_DEBUG -DBN_DEBUG -DREF_CHECK -DCONF_DEBUG -DCRYPTO_MDEBUG -DL_ENDIAN -ggdb -g3 -Wall::-D_REENTRANT::-ldl:BN_LLONG ${x86_gcc_des} ${x86_gcc_opts}:${x86_elf_asm}:dlfcn:linux-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
 "debug-levitte-linux-noasm","gcc:-DLEVITTE_DEBUG -DBN_DEBUG -DREF_CHECK -DCONF_DEBUG -DCRYPTO_MDEBUG -DOPENSSL_NO_ASM -DL_ENDIAN -ggdb -g3 -Wall::-D_REENTRANT::-ldl:BN_LLONG ${x86_gcc_des} ${x86_gcc_opts}:${no_asm}:dlfcn:linux-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
 "debug-levitte-linux-elf-extreme","gcc:-DLEVITTE_DEBUG -DREF_CHECK -DCONF_DEBUG -DBN_DEBUG -DBN_DEBUG_RAND -DCRYPTO_MDEBUG -DENGINE_CONF_DEBUG -DL_ENDIAN -DTERMIO -DPEDANTIC -ggdb -g3 -pedantic -ansi -Wall -W -Wundef -Wshadow -Wcast-align -Wstrict-prototypes -Wmissing-prototypes -Wno-long-long -Wundef -Wconversion -pipe::-D_REENTRANT::-ldl:BN_LLONG ${x86_gcc_des} ${x86_gcc_opts}:${x86_elf_asm}:dlfcn:linux-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
 "debug-levitte-linux-noasm-extreme","gcc:-DLEVITTE_DEBUG -DREF_CHECK -DCONF_DEBUG -DBN_DEBUG -DBN_DEBUG_RAND -DCRYPTO_MDEBUG -DENGINE_CONF_DEBUG -DOPENSSL_NO_ASM -DL_ENDIAN -DTERMIO -DPEDANTIC -ggdb -g3 -pedantic -ansi -Wall -W -Wundef -Wshadow -Wcast-align -Wstrict-prototypes -Wmissing-prototypes -Wno-long-long -Wundef -Wconversion -pipe::-D_REENTRANT::-ldl:BN_LLONG ${x86_gcc_des} ${x86_gcc_opts}:${no_asm}:dlfcn:linux-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
-"debug-geoff32","gcc:-DBN_DEBUG -DBN_DEBUG_RAND -DBN_STRICT -DPURIFY -DOPENSSL_NO_DEPRECATED -DOPENSSL_NO_ASM -DOPENSSL_NO_INLINE_ASM -DL_ENDIAN -DTERMIO -DPEDANTIC -O1 -ggdb2 -Wall -Werror -Wundef -pedantic -Wshadow -Wpointer-arith -Wbad-function-cast -Wcast-align -Wsign-compare -Wmissing-prototypes -Wmissing-declarations -Wno-long-long::-D_REENTRANT::-ldl:BN_LLONG:${no_asm}:dlfcn:linux-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
-"debug-geoff64","gcc:-DBN_DEBUG -DBN_DEBUG_RAND -DBN_STRICT -DPURIFY -DOPENSSL_NO_DEPRECATED -DOPENSSL_NO_ASM -DOPENSSL_NO_INLINE_ASM -DL_ENDIAN -DTERMIO -DPEDANTIC -O1 -ggdb2 -Wall -Werror -Wundef -pedantic -Wshadow -Wpointer-arith -Wbad-function-cast -Wcast-align -Wsign-compare -Wmissing-prototypes -Wmissing-declarations -Wno-long-long::-D_REENTRANT::-ldl:SIXTY_FOUR_BIT_LONG RC4_CHAR RC4_CHUNK DES_INT DES_UNROLL BF_PTR:${no_asm}:dlfcn:linux-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
+"debug-geoff32","gcc:-DBN_DEBUG -DBN_DEBUG_RAND -DBN_STRICT -DPURIFY -DOPENSSL_NO_DEPRECATED -DOPENSSL_NO_ASM -DOPENSSL_NO_INLINE_ASM -DL_ENDIAN -DTERMIO -DPEDANTIC -DMD32_REG_T=int -O1 -ggdb2 -Wall -Werror -Wundef -pedantic -Wshadow -Wpointer-arith -Wbad-function-cast -Wcast-align -Wsign-compare -Wmissing-prototypes -Wmissing-declarations -Wno-long-long::-D_REENTRANT::-ldl:BN_LLONG:${no_asm}:dlfcn:linux-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
+"debug-geoff64","gcc:-DBN_DEBUG -DBN_DEBUG_RAND -DBN_STRICT -DPURIFY -DOPENSSL_NO_DEPRECATED -DOPENSSL_NO_ASM -DOPENSSL_NO_INLINE_ASM -DL_ENDIAN -DTERMIO -DPEDANTIC -DMD32_REG_T=int -O1 -ggdb2 -Wall -Werror -Wundef -pedantic -Wshadow -Wpointer-arith -Wbad-function-cast -Wcast-align -Wsign-compare -Wmissing-prototypes -Wmissing-declarations -Wno-long-long::-D_REENTRANT::-ldl:SIXTY_FOUR_BIT_LONG RC4_CHAR RC4_CHUNK DES_INT DES_UNROLL BF_PTR:${no_asm}:dlfcn:linux-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
 "debug-linux-pentium","gcc:-DBN_DEBUG -DREF_CHECK -DCONF_DEBUG -DBN_CTX_DEBUG -DCRYPTO_MDEBUG -DL_ENDIAN -DTERMIO -g -mcpu=pentium -Wall::-D_REENTRANT::-ldl:BN_LLONG ${x86_gcc_des} ${x86_gcc_opts}:${x86_elf_asm}:dlfcn",
 "debug-linux-ppro","gcc:-DBN_DEBUG -DREF_CHECK -DCONF_DEBUG -DBN_CTX_DEBUG -DCRYPTO_MDEBUG -DL_ENDIAN -DTERMIO -g -mcpu=pentiumpro -Wall::-D_REENTRANT::-ldl:BN_LLONG ${x86_gcc_des} ${x86_gcc_opts}:${x86_elf_asm}:dlfcn",
 "debug-linux-elf","gcc:-DBN_DEBUG -DREF_CHECK -DCONF_DEBUG -DBN_CTX_DEBUG -DCRYPTO_MDEBUG -DL_ENDIAN -DTERMIO -g -march=i486 -Wall::-D_REENTRANT::-lefence -ldl:BN_LLONG ${x86_gcc_des} ${x86_gcc_opts}:${x86_elf_asm}:dlfcn:linux-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
 "debug-linux-elf-noefence","gcc:-DBN_DEBUG -DREF_CHECK -DCONF_DEBUG -DBN_CTX_DEBUG -DCRYPTO_MDEBUG -DL_ENDIAN -DTERMIO -g -march=i486 -Wall::-D_REENTRANT::-ldl:BN_LLONG ${x86_gcc_des} ${x86_gcc_opts}:${x86_elf_asm}:dlfcn:linux-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
-"debug-linux-ia32-aes", "gcc:-DAES_EXPERIMENTAL -DL_ENDIAN -DTERMIO -O3 -fomit-frame-pointer -Wall::-D_REENTRANT::-ldl:BN_LLONG ${x86_gcc_des} ${x86_gcc_opts}:x86cpuid.o:bn-586.o co-586.o x86-mont.o::des-586.o crypt586.o:aes_x86core.o aes_cbc.o aesni-x86.o:bf-586.o:md5-586.o:sha1-586.o sha256-586.o sha512-586.o:cast-586.o:rc4-586.o:rmd-586.o:rc5-586.o:wp_block.o wp-mmx.o::ghash-x86.o::elf:dlfcn:linux-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
+"debug-linux-ia32-aes", "gcc:-DAES_EXPERIMENTAL -DL_ENDIAN -DTERMIO -O3 -fomit-frame-pointer -Wall::-D_REENTRANT::-ldl:BN_LLONG ${x86_gcc_des} ${x86_gcc_opts}:x86cpuid.o:bn-586.o co-586.o x86-mont.o:des-586.o crypt586.o:aes_x86core.o aes_cbc.o:bf-586.o:md5-586.o:sha1-586.o sha256-586.o sha512-586.o:cast-586.o:rc4-586.o:rmd-586.o:rc5-586.o:wp_block.o wp-mmx.o::elf:dlfcn:linux-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
 "debug-linux-generic32","gcc:-DBN_DEBUG -DREF_CHECK -DCONF_DEBUG -DCRYPTO_MDEBUG -DTERMIO -g -Wall::-D_REENTRANT::-ldl:BN_LLONG RC4_CHAR RC4_CHUNK DES_INT DES_UNROLL BF_PTR:${no_asm}:dlfcn:linux-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
 "debug-linux-generic64","gcc:-DBN_DEBUG -DREF_CHECK -DCONF_DEBUG -DCRYPTO_MDEBUG -DTERMIO -g -Wall::-D_REENTRANT::-ldl:SIXTY_FOUR_BIT_LONG RC4_CHAR RC4_CHUNK DES_INT DES_UNROLL BF_PTR:${no_asm}:dlfcn:linux-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
-"debug-linux-x86_64","gcc:-DBN_DEBUG -DREF_CHECK -DCONF_DEBUG -DCRYPTO_MDEBUG -m64 -DL_ENDIAN -DTERMIO -g -Wall::-D_REENTRANT::-ldl:SIXTY_FOUR_BIT_LONG RC4_CHUNK DES_INT DES_UNROLL:${x86_64_asm}:elf:dlfcn:linux-shared:-fPIC:-m64:.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR):::64",
+"debug-linux-x86_64",	"gcc:-DBN_DEBUG -DREF_CHECK -DCONF_DEBUG -DCRYPTO_MDEBUG -m64 -DL_ENDIAN -DTERMIO -g -Wall -DMD32_REG_T=int::-D_REENTRANT::-ldl:SIXTY_FOUR_BIT_LONG RC4_CHUNK DES_INT DES_UNROLL:${x86_64_asm}:elf:dlfcn:linux-shared:-fPIC:-m64:.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR):::64",
 "dist",		"cc:-O::(unknown)::::::",

 # Basic configs that should work on any (32 and less bit) box
@@ -224,10 +215,10 @@ my %table=(
 # actually recommend to consider using gcc shared build even with vendor
 # compiler:-)
 #						<appro@fy.chalmers.se>
-"solaris64-x86_64-gcc","gcc:-m64 -O3 -Wall -DL_ENDIAN::-D_REENTRANT::-lsocket -lnsl -ldl:SIXTY_FOUR_BIT_LONG RC4_CHUNK DES_INT DES_UNROLL:${x86_64_asm}:elf:dlfcn:solaris-shared:-fPIC:-m64 -shared -static-libgcc:.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR):::/64",
+"solaris64-x86_64-gcc","gcc:-m64 -O3 -Wall -DL_ENDIAN -DMD32_REG_T=int::-D_REENTRANT::-lsocket -lnsl -ldl:SIXTY_FOUR_BIT_LONG RC4_CHUNK DES_INT DES_UNROLL:${x86_64_asm}:elf:dlfcn:solaris-shared:-fPIC:-m64 -shared -static-libgcc:.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR):::/64",
 
 #### Solaris x86 with Sun C setups
-"solaris-x86-cc","cc:-fast -xarch=generic -O -Xa::-D_REENTRANT::-lsocket -lnsl -ldl:BN_LLONG RC4_CHAR RC4_CHUNK DES_PTR DES_UNROLL BF_PTR:${no_asm}:dlfcn:solaris-shared:-KPIC:-G -dy -z text:.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
+"solaris-x86-cc","cc:-fast -O -Xa::-D_REENTRANT::-lsocket -lnsl -ldl:BN_LLONG RC4_CHAR RC4_CHUNK DES_PTR DES_UNROLL BF_PTR:${no_asm}:dlfcn:solaris-shared:-KPIC:-G -dy -z text:.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
 "solaris64-x86_64-cc","cc:-fast -xarch=amd64 -xstrconst -Xa -DL_ENDIAN::-D_REENTRANT::-lsocket -lnsl -ldl:SIXTY_FOUR_BIT_LONG RC4_CHUNK DES_INT DES_UNROLL:${x86_64_asm}:elf:dlfcn:solaris-shared:-KPIC:-xarch=amd64 -G -dy -z text:.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR):::/64",

 #### SPARC Solaris with GNU C setups
@@ -258,16 +249,16 @@ my %table=(

 #### IRIX 5.x configs
 # -mips2 flag is added by ./config when appropriate.
-"irix-gcc","gcc:-O3 -DTERMIOS -DB_ENDIAN::(unknown):::BN_LLONG MD2_CHAR RC4_INDEX RC4_CHAR RC4_CHUNK DES_UNROLL DES_RISC2 DES_PTR BF_PTR:${mips32_asm}:o32:dlfcn:irix-shared:::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
-"irix-cc", "cc:-O2 -use_readonly_const -DTERMIOS -DB_ENDIAN::(unknown):::BN_LLONG RC4_CHAR RC4_CHUNK DES_PTR DES_RISC2 DES_UNROLL BF_PTR:${mips32_asm}:o32:dlfcn:irix-shared:::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
+"irix-gcc","gcc:-O3 -DTERMIOS -DB_ENDIAN::(unknown):::BN_LLONG MD2_CHAR RC4_INDEX RC4_CHAR RC4_CHUNK DES_UNROLL DES_RISC2 DES_PTR BF_PTR:${no_asm}:dlfcn:irix-shared:::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
+"irix-cc", "cc:-O2 -use_readonly_const -DTERMIOS -DB_ENDIAN::(unknown):::BN_LLONG RC4_CHAR RC4_CHUNK DES_PTR DES_RISC2 DES_UNROLL BF_PTR:${no_asm}:dlfcn:irix-shared:::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
 #### IRIX 6.x configs
 # Only N32 and N64 ABIs are supported. If you need O32 ABI build, invoke
 # './Configure irix-cc -o32' manually.
-"irix-mips3-gcc","gcc:-mabi=n32 -O3 -DTERMIOS -DB_ENDIAN -DBN_DIV3W::-D_SGI_MP_SOURCE:::MD2_CHAR RC4_INDEX RC4_CHAR RC4_CHUNK_LL DES_UNROLL DES_RISC2 DES_PTR BF_PTR SIXTY_FOUR_BIT:${mips64_asm}:n32:dlfcn:irix-shared::-mabi=n32:.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR):::32",
-"irix-mips3-cc", "cc:-n32 -mips3 -O2 -use_readonly_const -G0 -rdata_shared -DTERMIOS -DB_ENDIAN -DBN_DIV3W::-D_SGI_MP_SOURCE:::DES_PTR RC4_CHAR RC4_CHUNK_LL DES_RISC2 DES_UNROLL BF_PTR SIXTY_FOUR_BIT:${mips64_asm}:n32:dlfcn:irix-shared::-n32:.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR):::32",
+"irix-mips3-gcc","gcc:-mabi=n32 -O3 -DTERMIOS -DB_ENDIAN -DBN_DIV3W::-D_SGI_MP_SOURCE:::MD2_CHAR RC4_INDEX RC4_CHAR RC4_CHUNK_LL DES_UNROLL DES_RISC2 DES_PTR BF_PTR SIXTY_FOUR_BIT:${mips3_asm}:dlfcn:irix-shared::-mabi=n32:.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR):::32",
+"irix-mips3-cc", "cc:-n32 -mips3 -O2 -use_readonly_const -G0 -rdata_shared -DTERMIOS -DB_ENDIAN -DBN_DIV3W::-D_SGI_MP_SOURCE:::DES_PTR RC4_CHAR RC4_CHUNK_LL DES_RISC2 DES_UNROLL BF_PTR SIXTY_FOUR_BIT:${mips3_asm}:dlfcn:irix-shared::-n32:.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR):::32",
 # N64 ABI builds.
-"irix64-mips4-gcc","gcc:-mabi=64 -mips4 -O3 -DTERMIOS -DB_ENDIAN -DBN_DIV3W::-D_SGI_MP_SOURCE:::RC4_CHAR RC4_CHUNK DES_RISC2 DES_UNROLL SIXTY_FOUR_BIT_LONG:${mips64_asm}:64:dlfcn:irix-shared::-mabi=64:.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR):::64",
-"irix64-mips4-cc", "cc:-64 -mips4 -O2 -use_readonly_const -G0 -rdata_shared -DTERMIOS -DB_ENDIAN -DBN_DIV3W::-D_SGI_MP_SOURCE:::RC4_CHAR RC4_CHUNK DES_RISC2 DES_UNROLL SIXTY_FOUR_BIT_LONG:${mips64_asm}:64:dlfcn:irix-shared::-64:.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR):::64",
+"irix64-mips4-gcc","gcc:-mabi=64 -mips4 -O3 -DTERMIOS -DB_ENDIAN -DBN_DIV3W::-D_SGI_MP_SOURCE:::RC4_CHAR RC4_CHUNK DES_RISC2 DES_UNROLL SIXTY_FOUR_BIT_LONG:${mips3_asm}:dlfcn:irix-shared::-mabi=64:.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR):::64",
+"irix64-mips4-cc", "cc:-64 -mips4 -O2 -use_readonly_const -G0 -rdata_shared -DTERMIOS -DB_ENDIAN -DBN_DIV3W::-D_SGI_MP_SOURCE:::RC4_CHAR RC4_CHUNK DES_RISC2 DES_UNROLL SIXTY_FOUR_BIT_LONG:${mips3_asm}:dlfcn:irix-shared::-64:.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR):::64",

 #### Unified HP-UX ANSI C configs.
 # Special notes:
@@ -300,18 +291,17 @@ my %table=(
 # Since there is mention of this in shlib/hpux10-cc.sh
 "hpux-parisc-cc-o4","cc:-Ae +O4 +ESlit -z -DB_ENDIAN -DBN_DIV2W -DMD32_XARRAY::-D_REENTRANT::-ldld:BN_LLONG DES_PTR DES_UNROLL DES_RISC1:${no_asm}:dl:hpux-shared:+Z:-b:.sl.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
 "hpux-parisc-gcc","gcc:-O3 -DB_ENDIAN -DBN_DIV2W::-D_REENTRANT::-Wl,+s -ldld:BN_LLONG DES_PTR DES_UNROLL DES_RISC1:${no_asm}:dl:hpux-shared:-fPIC:-shared:.sl.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
-"hpux-parisc1_1-gcc","gcc:-O3 -DB_ENDIAN -DBN_DIV2W::-D_REENTRANT::-Wl,+s -ldld:BN_LLONG DES_PTR DES_UNROLL DES_RISC1:${parisc11_asm}:dl:hpux-shared:-fPIC:-shared:.sl.\$(SHLIB_MAJOR).\$(SHLIB_MINOR):::/pa1.1",
-"hpux-parisc2-gcc","gcc:-march=2.0 -O3 -DB_ENDIAN -D_REENTRANT::::-Wl,+s -ldld:SIXTY_FOUR_BIT RC4_CHAR RC4_CHUNK DES_PTR DES_UNROLL DES_RISC1:".eval{my $asm=$parisc20_asm;$asm=~s/2W\./2\./;$asm=~s/:64/:32/;$asm}.":dl:hpux-shared:-fPIC:-shared:.sl.\$(SHLIB_MAJOR).\$(SHLIB_MINOR):::/pa20_32",
-"hpux64-parisc2-gcc","gcc:-O3 -DB_ENDIAN -D_REENTRANT::::-ldl:SIXTY_FOUR_BIT_LONG MD2_CHAR RC4_INDEX RC4_CHAR DES_UNROLL DES_RISC1 DES_INT::pa-risc2W.o:::::::::::::::void:dlfcn:hpux-shared:-fpic:-shared:.sl.\$(SHLIB_MAJOR).\$(SHLIB_MINOR):::/pa20_64",
+"hpux-parisc2-gcc","gcc:-march=2.0 -O3 -DB_ENDIAN -D_REENTRANT::::-Wl,+s -ldld:SIXTY_FOUR_BIT RC4_CHAR RC4_CHUNK DES_PTR DES_UNROLL DES_RISC1::pa-risc2.o::::::::::::void:dl:hpux-shared:-fPIC:-shared:.sl.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
+"hpux64-parisc2-gcc","gcc:-O3 -DB_ENDIAN -D_REENTRANT::::-ldl:SIXTY_FOUR_BIT_LONG MD2_CHAR RC4_INDEX RC4_CHAR DES_UNROLL DES_RISC1 DES_INT::pa-risc2W.o::::::::::::void:dlfcn:hpux-shared:-fpic:-shared:.sl.\$(SHLIB_MAJOR).\$(SHLIB_MINOR):::/pa20_64",

 # More attempts at unified 10.X and 11.X targets for HP C compiler.
 #
 # Chris Ruemmler <ruemmler@cup.hp.com>
 # Kevin Steves <ks@hp.se>
 "hpux-parisc-cc","cc:+O3 +Optrs_strongly_typed -Ae +ESlit -DB_ENDIAN -DBN_DIV2W -DMD32_XARRAY::-D_REENTRANT::-Wl,+s -ldld:MD2_CHAR RC4_INDEX RC4_CHAR DES_UNROLL DES_RISC1 DES_INT:${no_asm}:dl:hpux-shared:+Z:-b:.sl.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
-"hpux-parisc1_1-cc","cc:+DA1.1 +O3 +Optrs_strongly_typed -Ae +ESlit -DB_ENDIAN -DMD32_XARRAY::-D_REENTRANT::-Wl,+s -ldld:MD2_CHAR RC4_INDEX RC4_CHAR DES_UNROLL DES_RISC1 DES_INT:${parisc11_asm}:dl:hpux-shared:+Z:-b:.sl.\$(SHLIB_MAJOR).\$(SHLIB_MINOR):::/pa1.1",
-"hpux-parisc2-cc","cc:+DA2.0 +DS2.0 +O3 +Optrs_strongly_typed -Ae +ESlit -DB_ENDIAN -DMD32_XARRAY -D_REENTRANT::::-Wl,+s -ldld:SIXTY_FOUR_BIT MD2_CHAR RC4_INDEX RC4_CHAR DES_UNROLL DES_RISC1 DES_INT:".eval{my $asm=$parisc20_asm;$asm=~s/2W\./2\./;$asm=~s/:64/:32/;$asm}.":dl:hpux-shared:+Z:-b:.sl.\$(SHLIB_MAJOR).\$(SHLIB_MINOR):::/pa20_32",
-"hpux64-parisc2-cc","cc:+DD64 +O3 +Optrs_strongly_typed -Ae +ESlit -DB_ENDIAN -DMD32_XARRAY -D_REENTRANT::::-ldl:SIXTY_FOUR_BIT_LONG MD2_CHAR RC4_INDEX RC4_CHAR DES_UNROLL DES_RISC1 DES_INT:${parisc20_asm}:dlfcn:hpux-shared:+Z:+DD64 -b:.sl.\$(SHLIB_MAJOR).\$(SHLIB_MINOR):::/pa20_64",
+"hpux-parisc1_0-cc","cc:+DAportable +O3 +Optrs_strongly_typed -Ae +ESlit -DB_ENDIAN -DMD32_XARRAY::-D_REENTRANT::-Wl,+s -ldld:MD2_CHAR RC4_INDEX RC4_CHAR DES_UNROLL DES_RISC1 DES_INT:${no_asm}:dl:hpux-shared:+Z:-b:.sl.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
+"hpux-parisc2-cc","cc:+DA2.0 +DS2.0 +O3 +Optrs_strongly_typed -Ae +ESlit -DB_ENDIAN -DMD32_XARRAY -D_REENTRANT::::-Wl,+s -ldld:SIXTY_FOUR_BIT MD2_CHAR RC4_INDEX RC4_CHAR DES_UNROLL DES_RISC1 DES_INT::pa-risc2.o::::::::::::void:dl:hpux-shared:+Z:-b:.sl.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
+"hpux64-parisc2-cc","cc:+DD64 +O3 +Optrs_strongly_typed -Ae +ESlit -DB_ENDIAN -DMD32_XARRAY -D_REENTRANT::::-ldl:SIXTY_FOUR_BIT_LONG MD2_CHAR RC4_INDEX RC4_CHAR DES_UNROLL DES_RISC1 DES_INT::pa-risc2W.o::::::::::::void:dlfcn:hpux-shared:+Z:+DD64 -b:.sl.\$(SHLIB_MAJOR).\$(SHLIB_MINOR):::/pa20_64",

 # HP/UX IA-64 targets
 "hpux-ia64-cc","cc:-Ae +DD32 +O2 +Olit=all -z -DB_ENDIAN -D_REENTRANT::::-ldl:SIXTY_FOUR_BIT MD2_CHAR RC4_INDEX DES_UNROLL DES_RISC1 DES_INT:${ia64_asm}:dlfcn:hpux-shared:+Z:+DD32 -b:.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR):::/hpux32",
@@ -352,42 +342,18 @@ my %table=(
 # It's believed that majority of ARM toolchains predefine appropriate -march.
 # If you compiler does not, do complement config command line with one!
 "linux-armv4",	"gcc:-DTERMIO -O3 -Wall::-D_REENTRANT::-ldl:BN_LLONG RC4_CHAR RC4_CHUNK DES_INT DES_UNROLL BF_PTR:${armv4_asm}:dlfcn:linux-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
-"linux-aarch64","gcc:-DTERMIO -O3 -Wall::-D_REENTRANT::-ldl:SIXTY_FOUR_BIT_LONG RC4_CHAR RC4_CHUNK DES_INT DES_UNROLL BF_PTR:${aarch64_asm}:linux64:dlfcn:linux-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
-# Configure script adds minimally required -march for assembly support,
-# if no -march was specified at command line. mips32 and mips64 below
-# refer to contemporary MIPS Architecture specifications, MIPS32 and
-# MIPS64, rather than to kernel bitness.
-"linux-mips32",	"gcc:-mabi=32 -DTERMIO -O3 -Wall -DBN_DIV3W::-D_REENTRANT::-ldl:BN_LLONG RC4_CHAR RC4_CHUNK DES_INT DES_UNROLL BF_PTR:${mips32_asm}:o32:dlfcn:linux-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
-"linux-mips64",   "gcc:-mabi=n32 -DTERMIO -O3 -Wall -DBN_DIV3W::-D_REENTRANT::-ldl:SIXTY_FOUR_BIT RC4_CHAR RC4_CHUNK DES_INT DES_UNROLL BF_PTR:${mips64_asm}:n32:dlfcn:linux-shared:-fPIC:-mabi=n32:.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR):::32",
-"linux64-mips64",   "gcc:-mabi=64 -DTERMIO -O3 -Wall -DBN_DIV3W::-D_REENTRANT::-ldl:SIXTY_FOUR_BIT_LONG RC4_CHAR RC4_CHUNK DES_INT DES_UNROLL BF_PTR:${mips64_asm}:64:dlfcn:linux-shared:-fPIC:-mabi=64:.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR):::64",
 #### IA-32 targets...
-"linux-ia32-icc",	"icc:-DL_ENDIAN -DTERMIO -O2::-D_REENTRANT::-ldl -no_cpprt:BN_LLONG ${x86_gcc_des} ${x86_gcc_opts}:${x86_elf_asm}:dlfcn:linux-shared:-KPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
+"linux-ia32-icc",	"icc:-DL_ENDIAN -DTERMIO -O2 -no_cpprt::-D_REENTRANT::-ldl:BN_LLONG ${x86_gcc_des} ${x86_gcc_opts}:${x86_elf_asm}:dlfcn:linux-shared:-KPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
 "linux-elf",	"gcc:-DL_ENDIAN -DTERMIO -O3 -fomit-frame-pointer -Wall::-D_REENTRANT::-ldl:BN_LLONG ${x86_gcc_des} ${x86_gcc_opts}:${x86_elf_asm}:dlfcn:linux-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
 "linux-aout",	"gcc:-DL_ENDIAN -DTERMIO -O3 -fomit-frame-pointer -march=i486 -Wall::(unknown):::BN_LLONG ${x86_gcc_des} ${x86_gcc_opts}:${x86_asm}:a.out",
 ####
 "linux-generic64","gcc:-DTERMIO -O3 -Wall::-D_REENTRANT::-ldl:SIXTY_FOUR_BIT_LONG RC4_CHAR RC4_CHUNK DES_INT DES_UNROLL BF_PTR:${no_asm}:dlfcn:linux-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
 "linux-ppc64",	"gcc:-m64 -DB_ENDIAN -DTERMIO -O3 -Wall::-D_REENTRANT::-ldl:SIXTY_FOUR_BIT_LONG RC4_CHAR RC4_CHUNK DES_RISC1 DES_UNROLL:${ppc64_asm}:linux64:dlfcn:linux-shared:-fPIC:-m64:.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR):::64",
-"linux-ppc64le","gcc:-m64 -DL_ENDIAN -DTERMIO -O3 -Wall::-D_REENTRANT::-ldl:SIXTY_FOUR_BIT_LONG RC4_CHAR RC4_CHUNK DES_RISC1 DES_UNROLL:$ppc64_asm:linux64le:dlfcn:linux-shared:-fPIC:-m64:.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR):::",
 "linux-ia64",	"gcc:-DL_ENDIAN -DTERMIO -O3 -Wall::-D_REENTRANT::-ldl:SIXTY_FOUR_BIT_LONG RC4_CHUNK DES_UNROLL DES_INT:${ia64_asm}:dlfcn:linux-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
-"linux-ia64-icc","icc:-DL_ENDIAN -DTERMIO -O2 -Wall::-D_REENTRANT::-ldl -no_cpprt:SIXTY_FOUR_BIT_LONG RC4_CHUNK DES_RISC1 DES_INT:${ia64_asm}:dlfcn:linux-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
-"linux-x86_64",	"gcc:-m64 -DL_ENDIAN -DTERMIO -O3 -Wall::-D_REENTRANT::-ldl:SIXTY_FOUR_BIT_LONG RC4_CHUNK DES_INT DES_UNROLL:${x86_64_asm}:elf:dlfcn:linux-shared:-fPIC:-m64:.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR):::64",
-"linux-x86_64-icc", "icc:-DL_ENDIAN -DTERMIO -O2::-D_REENTRANT::-ldl -no_cpprt:SIXTY_FOUR_BIT_LONG RC4_CHUNK DES_INT DES_UNROLL:${x86_64_asm}:elf:dlfcn:linux-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR):::64",
-"linux-x32",	"gcc:-mx32 -DL_ENDIAN -DTERMIO -O3 -Wall::-D_REENTRANT::-ldl:SIXTY_FOUR_BIT RC4_CHUNK_LL DES_INT DES_UNROLL:${x86_64_asm}:elf:dlfcn:linux-shared:-fPIC:-mx32:.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR):::x32",
-"linux64-s390x",	"gcc:-m64 -DB_ENDIAN -DTERMIO -O3 -Wall::-D_REENTRANT::-ldl:SIXTY_FOUR_BIT_LONG RC4_CHAR RC4_CHUNK DES_INT DES_UNROLL:${s390x_asm}:64:dlfcn:linux-shared:-fPIC:-m64:.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR):::64",
-#### So called "highgprs" target for z/Architecture CPUs
-# "Highgprs" is kernel feature first implemented in Linux 2.6.32, see
-# /proc/cpuinfo. The idea is to preserve most significant bits of
-# general purpose registers not only upon 32-bit process context
-# switch, but even on asynchronous signal delivery to such process.
-# This makes it possible to deploy 64-bit instructions even in legacy
-# application context and achieve better [or should we say adequate]
-# performance. The build is binary compatible with linux-generic32,
-# and the idea is to be able to install the resulting libcrypto.so
-# alongside generic one, e.g. as /lib/highgprs/libcrypto.so.x.y, for
-# ldconfig and run-time linker to autodiscover. Unfortunately it
-# doesn't work just yet, because of couple of bugs in glibc
-# sysdeps/s390/dl-procinfo.c affecting ldconfig and ld.so.1...
-"linux32-s390x",	"gcc:-m31 -Wa,-mzarch -DB_ENDIAN -DTERMIO -O3 -Wall::-D_REENTRANT::-ldl:BN_LLONG RC4_CHAR RC4_CHUNK DES_INT DES_UNROLL:".eval{my $asm=$s390x_asm;$asm=~s/bn\-s390x\.o/bn_asm.o/;$asm}.":31:dlfcn:linux-shared:-fPIC:-m31:.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR):::/highgprs",
+"linux-ia64-ecc","ecc:-DL_ENDIAN -DTERMIO -O2 -Wall -no_cpprt::-D_REENTRANT::-ldl:SIXTY_FOUR_BIT_LONG RC4_CHUNK DES_INT:${ia64_asm}:dlfcn:linux-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
+"linux-ia64-icc","icc:-DL_ENDIAN -DTERMIO -O2 -Wall -no_cpprt::-D_REENTRANT::-ldl:SIXTY_FOUR_BIT_LONG RC4_CHUNK DES_RISC1 DES_INT:${ia64_asm}:dlfcn:linux-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
+"linux-x86_64",	"gcc:-m64 -DL_ENDIAN -DTERMIO -O3 -Wall -DMD32_REG_T=int::-D_REENTRANT::-ldl:SIXTY_FOUR_BIT_LONG RC4_CHUNK DES_INT DES_UNROLL:${x86_64_asm}:elf:dlfcn:linux-shared:-fPIC:-m64:.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR):::64",
+"linux-s390x",	"gcc:-m64 -DB_ENDIAN -DTERMIO -O3 -Wall::-D_REENTRANT::-ldl:SIXTY_FOUR_BIT_LONG RC4_CHAR RC4_CHUNK DES_INT DES_UNROLL:${s390x_asm}:dlfcn:linux-shared:-fPIC:-m64:.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR):::64",
 #### SPARC Linux setups
 # Ray Miller <ray.miller@computing-services.oxford.ac.uk> has patiently
 # assisted with debugging of following two configs.
@@ -415,12 +381,6 @@ my %table=(
 "linux-alpha-ccc","ccc:-fast -readonly_strings -DL_ENDIAN -DTERMIO::-D_REENTRANT:::SIXTY_FOUR_BIT_LONG RC4_CHUNK DES_INT DES_PTR DES_RISC1 DES_UNROLL:${alpha_asm}",
 "linux-alpha+bwx-ccc","ccc:-fast -readonly_strings -DL_ENDIAN -DTERMIO::-D_REENTRANT:::SIXTY_FOUR_BIT_LONG RC4_CHAR RC4_CHUNK DES_INT DES_PTR DES_RISC1 DES_UNROLL:${alpha_asm}",

-# Android: linux-* but without -DTERMIO and pointers to headers and libs.
-"android","gcc:-mandroid -I\$(ANDROID_DEV)/include -B\$(ANDROID_DEV)/lib -O3 -fomit-frame-pointer -Wall::-D_REENTRANT::-ldl:BN_LLONG RC4_CHAR RC4_CHUNK DES_INT DES_UNROLL BF_PTR:${no_asm}:dlfcn:linux-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
-"android-x86","gcc:-mandroid -I\$(ANDROID_DEV)/include -B\$(ANDROID_DEV)/lib -O3 -fomit-frame-pointer -Wall::-D_REENTRANT::-ldl:BN_LLONG ${x86_gcc_des} ${x86_gcc_opts}:".eval{my $asm=${x86_elf_asm};$asm=~s/:elf/:android/;$asm}.":dlfcn:linux-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
-"android-armv7","gcc:-march=armv7-a -mandroid -I\$(ANDROID_DEV)/include -B\$(ANDROID_DEV)/lib -O3 -fomit-frame-pointer -Wall::-D_REENTRANT::-ldl:BN_LLONG RC4_CHAR RC4_CHUNK DES_INT DES_UNROLL BF_PTR:${armv4_asm}:dlfcn:linux-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
-"android-mips","gcc:-mandroid -I\$(ANDROID_DEV)/include -B\$(ANDROID_DEV)/lib -O3 -Wall::-D_REENTRANT::-ldl:BN_LLONG RC4_CHAR RC4_CHUNK DES_INT DES_UNROLL BF_PTR:${mips32_asm}:o32:dlfcn:linux-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
-
 #### *BSD [do see comment about ${BSDthreads} above!]
 "BSD-generic32","gcc:-DTERMIOS -O3 -fomit-frame-pointer -Wall::${BSDthreads}:::BN_LLONG RC2_CHAR RC4_INDEX DES_INT DES_UNROLL:${no_asm}:dlfcn:bsd-gcc-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
 "BSD-x86",	"gcc:-DL_ENDIAN -DTERMIOS -O3 -fomit-frame-pointer -Wall::${BSDthreads}:::BN_LLONG ${x86_gcc_des} ${x86_gcc_opts}:${x86_asm}:a.out:dlfcn:bsd-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
@@ -434,7 +394,7 @@ my %table=(
 # triggered by RIPEMD160 code.
 "BSD-sparc64",	"gcc:-DB_ENDIAN -DTERMIOS -O3 -DMD32_REG_T=int -Wall::${BSDthreads}:::BN_LLONG RC2_CHAR RC4_CHUNK DES_INT DES_PTR DES_RISC2 BF_PTR:${sparcv9_asm}:dlfcn:bsd-gcc-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
 "BSD-ia64",	"gcc:-DL_ENDIAN -DTERMIOS -O3 -Wall::${BSDthreads}:::SIXTY_FOUR_BIT_LONG RC4_CHUNK DES_UNROLL DES_INT:${ia64_asm}:dlfcn:bsd-gcc-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
-"BSD-x86_64",	"gcc:-DL_ENDIAN -DTERMIOS -O3 -Wall::${BSDthreads}:::SIXTY_FOUR_BIT_LONG RC4_CHUNK DES_INT DES_UNROLL:${x86_64_asm}:elf:dlfcn:bsd-gcc-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
+"BSD-x86_64",	"gcc:-DL_ENDIAN -DTERMIOS -O3 -DMD32_REG_T=int -Wall::${BSDthreads}:::SIXTY_FOUR_BIT_LONG RC4_CHUNK DES_INT DES_UNROLL:${x86_64_asm}:elf:dlfcn:bsd-gcc-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",

 "bsdi-elf-gcc",     "gcc:-DPERL5 -DL_ENDIAN -fomit-frame-pointer -O3 -march=i486 -Wall::(unknown)::-ldl:BN_LLONG ${x86_gcc_des} ${x86_gcc_opts}:${x86_elf_asm}:dlfcn:bsd-gcc-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",

@@ -467,11 +427,11 @@ my %table=(
 # UnixWare 2.0x fails destest with -O.
 "unixware-2.0","cc:-DFILIO_H -DNO_STRINGS_H::-Kthread::-lsocket -lnsl -lresolv -lx:${x86_gcc_des} ${x86_gcc_opts}:::",
 "unixware-2.1","cc:-O -DFILIO_H::-Kthread::-lsocket -lnsl -lresolv -lx:${x86_gcc_des} ${x86_gcc_opts}:::",
-"unixware-7","cc:-O -DFILIO_H -Kalloca::-Kthread::-lsocket -lnsl:BN_LLONG MD2_CHAR RC4_INDEX ${x86_gcc_des}:${x86_elf_asm}-1:dlfcn:svr5-shared:-Kpic::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
-"unixware-7-gcc","gcc:-DL_ENDIAN -DFILIO_H -O3 -fomit-frame-pointer -march=pentium -Wall::-D_REENTRANT::-lsocket -lnsl:BN_LLONG ${x86_gcc_des} ${x86_gcc_opts}:${x86_elf_asm}-1:dlfcn:gnu-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
+"unixware-7","cc:-O -DFILIO_H -Kalloca::-Kthread::-lsocket -lnsl:BN_LLONG MD2_CHAR RC4_INDEX ${x86_gcc_des}:${x86_elf_asm}:dlfcn:svr5-shared:-Kpic::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
+"unixware-7-gcc","gcc:-DL_ENDIAN -DFILIO_H -O3 -fomit-frame-pointer -march=pentium -Wall::-D_REENTRANT::-lsocket -lnsl:BN_LLONG ${x86_gcc_des} ${x86_gcc_opts}:${x86_elf_asm}:dlfcn:gnu-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
 # SCO 5 - Ben Laurie <ben@algroup.co.uk> says the -O breaks the SCO cc.
-"sco5-cc",  "cc:-belf::(unknown)::-lsocket -lnsl:${x86_gcc_des} ${x86_gcc_opts}:${x86_elf_asm}-1:dlfcn:svr3-shared:-Kpic::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
-"sco5-gcc",  "gcc:-O3 -fomit-frame-pointer::(unknown)::-lsocket -lnsl:BN_LLONG ${x86_gcc_des} ${x86_gcc_opts}:${x86_elf_asm}-1:dlfcn:svr3-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
+"sco5-cc",  "cc:-belf::(unknown)::-lsocket -lnsl:${x86_gcc_des} ${x86_gcc_opts}:${x86_elf_asm}:dlfcn:svr3-shared:-Kpic::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
+"sco5-gcc",  "gcc:-O3 -fomit-frame-pointer::(unknown)::-lsocket -lnsl:BN_LLONG ${x86_gcc_des} ${x86_gcc_opts}:${x86_elf_asm}:dlfcn:svr3-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",

 #### IBM's AIX.
 "aix3-cc",  "cc:-O -DB_ENDIAN -qmaxmem=16384::(unknown):AIX::BN_LLONG RC4_CHAR:::",
@@ -531,15 +491,15 @@ my %table=(
 # Visual C targets
 #
 # Win64 targets, WIN64I denotes IA-64 and WIN64A - AMD64
-"VC-WIN64I","cl:-W3 -Gs0 -Gy -nologo -DOPENSSL_SYSNAME_WIN32 -DWIN32_LEAN_AND_MEAN -DL_ENDIAN -DUNICODE -D_UNICODE -D_CRT_SECURE_NO_DEPRECATE:::WIN64I::SIXTY_FOUR_BIT RC4_CHUNK_LL DES_INT EXPORT_VAR_AS_FN:ia64cpuid.o:ia64.o ia64-mont.o:::aes_core.o aes_cbc.o aes-ia64.o::md5-ia64.o:sha1-ia64.o sha256-ia64.o sha512-ia64.o:::::::ghash-ia64.o::ias:win32",
-"VC-WIN64A","cl:-W3 -Gs0 -Gy -nologo -DOPENSSL_SYSNAME_WIN32 -DWIN32_LEAN_AND_MEAN -DL_ENDIAN -DUNICODE -D_UNICODE -D_CRT_SECURE_NO_DEPRECATE:::WIN64A::SIXTY_FOUR_BIT RC4_CHUNK_LL DES_INT EXPORT_VAR_AS_FN:".eval{my $asm=$x86_64_asm;$asm=~s/x86_64-gcc\.o/bn_asm.o/;$asm}.":auto:win32",
-"debug-VC-WIN64I","cl:-W3 -Gs0 -Gy -Zi -nologo -DOPENSSL_SYSNAME_WIN32 -DWIN32_LEAN_AND_MEAN -DL_ENDIAN -DUNICODE -D_UNICODE -D_CRT_SECURE_NO_DEPRECATE:::WIN64I::SIXTY_FOUR_BIT RC4_CHUNK_LL DES_INT EXPORT_VAR_AS_FN:ia64cpuid.o:ia64.o:::aes_core.o aes_cbc.o aes-ia64.o::md5-ia64.o:sha1-ia64.o sha256-ia64.o sha512-ia64.o:::::::ghash-ia64.o::ias:win32",
-"debug-VC-WIN64A","cl:-W3 -Gs0 -Gy -Zi -nologo -DOPENSSL_SYSNAME_WIN32 -DWIN32_LEAN_AND_MEAN -DL_ENDIAN -DUNICODE -D_UNICODE -D_CRT_SECURE_NO_DEPRECATE:::WIN64A::SIXTY_FOUR_BIT RC4_CHUNK_LL DES_INT EXPORT_VAR_AS_FN:".eval{my $asm=$x86_64_asm;$asm=~s/x86_64-gcc\.o/bn_asm.o/;$asm}.":auto:win32",
+"VC-WIN64I","cl:-W3 -Gs0 -Gy -nologo -DOPENSSL_SYSNAME_WIN32 -DWIN32_LEAN_AND_MEAN -DL_ENDIAN -DUNICODE -D_UNICODE -D_CRT_SECURE_NO_DEPRECATE:::WIN64I::SIXTY_FOUR_BIT RC4_CHUNK_LL DES_INT EXPORT_VAR_AS_FN:ia64cpuid.o:ia64.o::aes_core.o aes_cbc.o aes-ia64.o::md5-ia64.o:sha1-ia64.o sha256-ia64.o sha512-ia64.o:::::::ias:win32",
+"VC-WIN64A","cl:-W3 -Gs0 -Gy -nologo -DOPENSSL_SYSNAME_WIN32 -DWIN32_LEAN_AND_MEAN -DL_ENDIAN -DUNICODE -D_UNICODE -D_CRT_SECURE_NO_DEPRECATE:::WIN64A::SIXTY_FOUR_BIT RC4_CHUNK_LL DES_INT EXPORT_VAR_AS_FN:x86_64cpuid.o:bn_asm.o x86_64-mont.o::aes-x86_64.o::md5-x86_64.o:sha1-x86_64.o sha256-x86_64.o sha512-x86_64.o::rc4-x86_64.o:::wp-x86_64.o:cmll-x86_64.o cmll_misc.o:auto:win32",
+"debug-VC-WIN64I","cl:-W3 -Gs0 -Gy -Zi -nologo -DOPENSSL_SYSNAME_WIN32 -DWIN32_LEAN_AND_MEAN -DL_ENDIAN -DUNICODE -D_UNICODE -D_CRT_SECURE_NO_DEPRECATE:::WIN64I::SIXTY_FOUR_BIT RC4_CHUNK_LL DES_INT EXPORT_VAR_AS_FN:ia64cpuid.o:ia64.o::aes_core.o aes_cbc.o aes-ia64.o::md5-ia64.o:sha1-ia64.o sha256-ia64.o sha512-ia64.o:::::::ias:win32",
+"debug-VC-WIN64A","cl:-W3 -Gs0 -Gy -Zi -nologo -DOPENSSL_SYSNAME_WIN32 -DWIN32_LEAN_AND_MEAN -DL_ENDIAN -DUNICODE -D_UNICODE -D_CRT_SECURE_NO_DEPRECATE:::WIN64A::SIXTY_FOUR_BIT RC4_CHUNK_LL DES_INT EXPORT_VAR_AS_FN:x86_64cpuid.o:bn_asm.o x86_64-mont.o::aes-x86_64.o::md5-x86_64.o:sha1-x86_64.o sha256-x86_64.o sha512-x86_64.o::rc4-x86_64.o:::wp-x86_64.o:cmll-x86_64.o cmll_misc.o:auto:win32",
 # x86 Win32 target defaults to ANSI API, if you want UNICODE, complement
 # 'perl Configure VC-WIN32' with '-DUNICODE -D_UNICODE'
-"VC-WIN32","cl:-W3 -Gs0 -GF -Gy -nologo -DOPENSSL_SYSNAME_WIN32 -DWIN32_LEAN_AND_MEAN -DL_ENDIAN -D_CRT_SECURE_NO_DEPRECATE:::WIN32::BN_LLONG RC4_INDEX EXPORT_VAR_AS_FN ${x86_gcc_opts}:${x86_asm}:win32n:win32",
+"VC-WIN32","cl:-W3 -WX -Gs0 -GF -Gy -nologo -DOPENSSL_SYSNAME_WIN32 -DWIN32_LEAN_AND_MEAN -DL_ENDIAN -D_CRT_SECURE_NO_DEPRECATE:::WIN32::BN_LLONG RC4_INDEX EXPORT_VAR_AS_FN ${x86_gcc_opts}:${x86_asm}:win32n:win32",
 # Unified CE target
-"debug-VC-WIN32","cl:-W3 -Gs0 -GF -Gy -Zi -nologo -DOPENSSL_SYSNAME_WIN32 -DWIN32_LEAN_AND_MEAN -DL_ENDIAN -D_CRT_SECURE_NO_DEPRECATE:::WIN32::BN_LLONG RC4_INDEX EXPORT_VAR_AS_FN ${x86_gcc_opts}:${x86_asm}:win32n:win32",
+"debug-VC-WIN32","cl:-W3 -WX -Gs0 -GF -Gy -Zi -nologo -DOPENSSL_SYSNAME_WIN32 -DWIN32_LEAN_AND_MEAN -DL_ENDIAN -D_CRT_SECURE_NO_DEPRECATE:::WIN32::BN_LLONG RC4_INDEX EXPORT_VAR_AS_FN ${x86_gcc_opts}:${x86_asm}:win32n:win32",
 "VC-CE","cl::::WINCE::BN_LLONG RC4_INDEX EXPORT_VAR_AS_FN ${x86_gcc_opts}:${no_asm}:win32",

 # Borland C++ 4.5
@@ -562,7 +522,6 @@ my %table=(
 # Cygwin
 "Cygwin-pre1.3", "gcc:-DTERMIOS -DL_ENDIAN -fomit-frame-pointer -O3 -m486 -Wall::(unknown):CYGWIN32::BN_LLONG ${x86_gcc_des} ${x86_gcc_opts}:${no_asm}:win32",
 "Cygwin", "gcc:-DTERMIOS -DL_ENDIAN -fomit-frame-pointer -O3 -march=i486 -Wall:::CYGWIN32::BN_LLONG ${x86_gcc_des} ${x86_gcc_opts}:${x86_asm}:coff:dlfcn:cygwin-shared:-D_WINDLL:-shared:.dll.a",
-"Cygwin-x86_64", "gcc:-DTERMIOS -DL_ENDIAN -O3 -Wall:::CYGWIN32::SIXTY_FOUR_BIT_LONG RC4_CHUNK DES_INT DES_UNROLL:${x86_64_asm}:mingw64:dlfcn:cygwin-shared:-D_WINDLL:-shared:.dll.a",
 "debug-Cygwin", "gcc:-DTERMIOS -DL_ENDIAN -march=i486 -Wall -DBN_DEBUG -DREF_CHECK -DCONF_DEBUG -DBN_CTX_DEBUG -DCRYPTO_MDEBUG -DOPENSSL_NO_ASM -g -Wformat -Wshadow -Wmissing-prototypes -Wmissing-declarations -Werror:::CYGWIN32:::${no_asm}:dlfcn:cygwin-shared:-D_WINDLL:-shared:.dll.a",

 # NetWare from David Ward (dsward@novell.com)
@@ -593,13 +552,10 @@ my %table=(
 "rhapsody-ppc-cc","cc:-O3 -DB_ENDIAN::(unknown):MACOSX_RHAPSODY::BN_LLONG RC4_CHAR RC4_CHUNK DES_UNROLL BF_PTR:${no_asm}::",
 "darwin-ppc-cc","cc:-arch ppc -O3 -DB_ENDIAN -Wa,-force_cpusubtype_ALL::-D_REENTRANT:MACOSX:-Wl,-search_paths_first%:BN_LLONG RC4_CHAR RC4_CHUNK DES_UNROLL BF_PTR:${ppc32_asm}:osx32:dlfcn:darwin-shared:-fPIC -fno-common:-arch ppc -dynamiclib:.\$(SHLIB_MAJOR).\$(SHLIB_MINOR).dylib",
 "darwin64-ppc-cc","cc:-arch ppc64 -O3 -DB_ENDIAN::-D_REENTRANT:MACOSX:-Wl,-search_paths_first%:SIXTY_FOUR_BIT_LONG RC4_CHAR RC4_CHUNK DES_UNROLL BF_PTR:${ppc64_asm}:osx64:dlfcn:darwin-shared:-fPIC -fno-common:-arch ppc64 -dynamiclib:.\$(SHLIB_MAJOR).\$(SHLIB_MINOR).dylib",
-"darwin-i386-cc","cc:-arch i386 -O3 -fomit-frame-pointer -DL_ENDIAN::-D_REENTRANT:MACOSX:-Wl,-search_paths_first%:BN_LLONG RC4_INT RC4_CHUNK DES_UNROLL BF_PTR:".eval{my $asm=$x86_asm;$asm=~s/cast\-586\.o//;$asm}.":macosx:dlfcn:darwin-shared:-fPIC -fno-common:-arch i386 -dynamiclib:.\$(SHLIB_MAJOR).\$(SHLIB_MINOR).dylib",
+"darwin-i386-cc","cc:-arch i386 -O3 -fomit-frame-pointer -DL_ENDIAN::-D_REENTRANT:MACOSX:-Wl,-search_paths_first%:BN_LLONG RC4_INT RC4_CHUNK DES_UNROLL BF_PTR:${x86_asm}:macosx:dlfcn:darwin-shared:-fPIC -fno-common:-arch i386 -dynamiclib:.\$(SHLIB_MAJOR).\$(SHLIB_MINOR).dylib",
 "debug-darwin-i386-cc","cc:-arch i386 -g3 -DL_ENDIAN::-D_REENTRANT:MACOSX:-Wl,-search_paths_first%:BN_LLONG RC4_INT RC4_CHUNK DES_UNROLL BF_PTR:${x86_asm}:macosx:dlfcn:darwin-shared:-fPIC -fno-common:-arch i386 -dynamiclib:.\$(SHLIB_MAJOR).\$(SHLIB_MINOR).dylib",
-"darwin64-x86_64-cc","cc:-arch x86_64 -O3 -DL_ENDIAN -Wall::-D_REENTRANT:MACOSX:-Wl,-search_paths_first%:SIXTY_FOUR_BIT_LONG RC4_CHUNK DES_INT DES_UNROLL:".eval{my $asm=$x86_64_asm;$asm=~s/rc4\-[^:]+//;$asm}.":macosx:dlfcn:darwin-shared:-fPIC -fno-common:-arch x86_64 -dynamiclib:.\$(SHLIB_MAJOR).\$(SHLIB_MINOR).dylib",
-"debug-darwin64-x86_64-cc","cc:-arch x86_64 -ggdb -g2 -O0 -DL_ENDIAN -Wall::-D_REENTRANT:MACOSX:-Wl,-search_paths_first%:SIXTY_FOUR_BIT_LONG RC4_CHUNK DES_INT DES_UNROLL:".eval{my $asm=$x86_64_asm;$asm=~s/rc4\-[^:]+//;$asm}.":macosx:dlfcn:darwin-shared:-fPIC -fno-common:-arch x86_64 -dynamiclib:.\$(SHLIB_MAJOR).\$(SHLIB_MINOR).dylib",
+"darwin64-x86_64-cc","cc:-arch x86_64 -O3 -DL_ENDIAN -DMD32_REG_T=int -Wall::-D_REENTRANT:MACOSX:-Wl,-search_paths_first%:SIXTY_FOUR_BIT_LONG RC4_CHAR RC4_CHUNK DES_INT DES_UNROLL:".eval{my $asm=$x86_64_asm;$asm=~s/rc4\-[^:]+//;$asm}.":macosx:dlfcn:darwin-shared:-fPIC -fno-common:-arch x86_64 -dynamiclib:.\$(SHLIB_MAJOR).\$(SHLIB_MINOR).dylib",
 "debug-darwin-ppc-cc","cc:-DBN_DEBUG -DREF_CHECK -DCONF_DEBUG -DCRYPTO_MDEBUG -DB_ENDIAN -g -Wall -O::-D_REENTRANT:MACOSX::BN_LLONG RC4_CHAR RC4_CHUNK DES_UNROLL BF_PTR:${ppc32_asm}:osx32:dlfcn:darwin-shared:-fPIC:-dynamiclib:.\$(SHLIB_MAJOR).\$(SHLIB_MINOR).dylib",
-# iPhoneOS/iOS
-"iphoneos-cross","llvm-gcc:-O3 -isysroot \$(CROSS_TOP)/SDKs/\$(CROSS_SDK) -fomit-frame-pointer -fno-common::-D_REENTRANT:iOS:-Wl,-search_paths_first%:BN_LLONG RC4_CHAR RC4_CHUNK DES_UNROLL BF_PTR:${no_asm}:dlfcn:darwin-shared:-fPIC -fno-common:-dynamiclib:.\$(SHLIB_MAJOR).\$(SHLIB_MINOR).dylib",

 ##### A/UX
 "aux3-gcc","gcc:-O2 -DTERMIO::(unknown):AUX:-lbsd:RC4_CHAR RC4_CHUNK DES_UNROLL BF_PTR:::",
@@ -614,21 +570,18 @@ my %table=(
 "OS2-EMX", "gcc::::::::",

 ##### VxWorks for various targets
-"vxworks-ppc60x","ccppc:-D_REENTRANT -mrtp -mhard-float -mstrict-align -fno-implicit-fp -DPPC32_fp60x -O2 -fstrength-reduce -fno-builtin -fno-strict-aliasing -Wall -DCPU=PPC32 -DTOOL_FAMILY=gnu -DTOOL=gnu -I\$(WIND_BASE)/target/usr/h -I\$(WIND_BASE)/target/usr/h/wrn/coreip:::VXWORKS:-Wl,--defsym,__wrs_rtp_base=0xe0000000 -L \$(WIND_BASE)/target/usr/lib/ppc/PPC32/common:::::",
-"vxworks-ppcgen","ccppc:-D_REENTRANT -mrtp -msoft-float -mstrict-align -O1 -fno-builtin -fno-strict-aliasing -Wall -DCPU=PPC32 -DTOOL_FAMILY=gnu -DTOOL=gnu -I\$(WIND_BASE)/target/usr/h -I\$(WIND_BASE)/target/usr/h/wrn/coreip:::VXWORKS:-Wl,--defsym,__wrs_rtp_base=0xe0000000 -L \$(WIND_BASE)/target/usr/lib/ppc/PPC32/sfcommon:::::",
 "vxworks-ppc405","ccppc:-g -msoft-float -mlongcall -DCPU=PPC405 -I\$(WIND_BASE)/target/h:::VXWORKS:-r:::::",
 "vxworks-ppc750","ccppc:-ansi -nostdinc -DPPC750 -D_REENTRANT -fvolatile -fno-builtin -fno-for-scope -fsigned-char -Wall -msoft-float -mlongcall -DCPU=PPC604 -I\$(WIND_BASE)/target/h \$(DEBUG_FLAG):::VXWORKS:-r:::::",
 "vxworks-ppc750-debug","ccppc:-ansi -nostdinc -DPPC750 -D_REENTRANT -fvolatile -fno-builtin -fno-for-scope -fsigned-char -Wall -msoft-float -mlongcall -DCPU=PPC604 -I\$(WIND_BASE)/target/h -DBN_DEBUG -DREF_CHECK -DCONF_DEBUG -DBN_CTX_DEBUG -DCRYPTO_MDEBUG -DPEDANTIC -DDEBUG_SAFESTACK -DDEBUG -g:::VXWORKS:-r:::::",
 "vxworks-ppc860","ccppc:-nostdinc -msoft-float -DCPU=PPC860 -DNO_STRINGS_H -I\$(WIND_BASE)/target/h:::VXWORKS:-r:::::",
-"vxworks-simlinux","ccpentium:-B\$(WIND_BASE)/host/\$(WIND_HOST_TYPE)/lib/gcc-lib/ -D_VSB_CONFIG_FILE=\"\$(WIND_BASE)/target/lib/h/config/vsbConfig.h\" -DL_ENDIAN -DCPU=SIMLINUX -DTOOL_FAMILY=gnu -DTOOL=gnu -fno-builtin -fno-defer-pop -DNO_STRINGS_H -I\$(WIND_BASE)/target/h -I\$(WIND_BASE)/target/h/wrn/coreip -DOPENSSL_NO_HW_PADLOCK:::VXWORKS:-r::${no_asm}::::::ranlibpentium:",
-"vxworks-mips","ccmips:-mrtp -mips2 -O -G 0 -B\$(WIND_BASE)/host/\$(WIND_HOST_TYPE)/lib/gcc-lib/ -D_VSB_CONFIG_FILE=\"\$(WIND_BASE)/target/lib/h/config/vsbConfig.h\" -DCPU=MIPS32 -msoft-float -mno-branch-likely -DTOOL_FAMILY=gnu -DTOOL=gnu -fno-builtin -fno-defer-pop -DNO_STRINGS_H -I\$(WIND_BASE)/target/usr/h -I\$(WIND_BASE)/target/h/wrn/coreip::-D_REENTRANT:VXWORKS:-Wl,--defsym,__wrs_rtp_base=0xe0000000 -L \$(WIND_BASE)/target/usr/lib/mips/MIPSI32/sfcommon::${mips32_asm}:o32::::::ranlibmips:",
+"vxworks-mipsle","ccmips:-B\$(WIND_BASE)/host/\$(WIND_HOST_TYPE)/lib/gcc-lib/ -DL_ENDIAN -EL -Wl,-EL -mips2 -mno-branch-likely -G 0 -fno-builtin -msoft-float -DCPU=MIPS32 -DMIPSEL -DNO_STRINGS_H -I\$(WIND_BASE)/target/h:::VXWORKS:-r::${no_asm}::::::ranlibmips:",

 ##### Compaq Non-Stop Kernel (Tandem)
 "tandem-c89","c89:-Ww -D__TANDEM -D_XOPEN_SOURCE -D_XOPEN_SOURCE_EXTENDED=1 -D_TANDEM_SOURCE -DB_ENDIAN::(unknown):::THIRTY_TWO_BIT:::",

 # uClinux
-"uClinux-dist","$ENV{'CC'}:\$(CFLAGS)::-D_REENTRANT::\$(LDFLAGS) \$(LDLIBS):BN_LLONG:${no_asm}:$ENV{'LIBSSL_dlfcn'}:linux-shared:-fPIC:-shared:.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR):$ENV{'RANLIB'}::",
-"uClinux-dist64","$ENV{'CC'}:\$(CFLAGS)::-D_REENTRANT::\$(LDFLAGS) \$(LDLIBS):SIXTY_FOUR_BIT_LONG:${no_asm}:$ENV{'LIBSSL_dlfcn'}:linux-shared:-fPIC:-shared:.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR):$ENV{'RANLIB'}::",
+"uClinux-dist","$ENV{'CC'}:\$(CFLAGS)::-D_REENTRANT::\$(LDFLAGS) \$(LDLIBS):BN_LLONG:::::::::::::::$ENV{'LIBSSL_dlfcn'}:linux-shared:-fPIC:-shared:.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR):$ENV{'RANLIB'}::",
+"uClinux-dist64","$ENV{'CC'}:\$(CFLAGS)::-D_REENTRANT::\$(LDFLAGS) \$(LDLIBS):SIXTY_FOUR_BIT_LONG:::::::::::::::$ENV{'LIBSSL_dlfcn'}:linux-shared:-fPIC:-shared:.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR):$ENV{'RANLIB'}::",

 );

@@ -649,7 +602,6 @@ my $idx_lflags = $idx++;
 my $idx_bn_ops = $idx++;
 my $idx_cpuid_obj = $idx++;
 my $idx_bn_obj = $idx++;
-my $idx_ec_obj = $idx++;
 my $idx_des_obj = $idx++;
 my $idx_aes_obj = $idx++;
 my $idx_bf_obj = $idx++;
@@ -661,8 +613,6 @@ my $idx_rmd160_obj = $idx++;
 my $idx_rc5_obj = $idx++;
 my $idx_wp_obj = $idx++;
 my $idx_cmll_obj = $idx++;
-my $idx_modes_obj = $idx++;
-my $idx_engines_obj = $idx++;
 my $idx_perlasm_scheme = $idx++;
 my $idx_dso_scheme = $idx++;
 my $idx_shared_target = $idx++;
@@ -679,9 +629,6 @@ my $openssldir="";
 my $exe_ext="";
 my $install_prefix= "$ENV{'INSTALL_PREFIX'}";
 my $cross_compile_prefix="";
-my $fipsdir="/usr/local/ssl/fips-2.0";
-my $fipslibdir="";
-my $baseaddr="0xFB00000";
 my $no_threads=0;
 my $threads=0;
 my $no_shared=0; # but "no-shared" is default
@@ -716,37 +663,26 @@ my $cmll_enc="camellia.o cmll_misc.o cmll_cbc.o";
 my $processor="";
 my $default_ranlib;
 my $perl;
-my $fips=0;

-if (exists $ENV{FIPSDIR})
-	{
-	$fipsdir = $ENV{FIPSDIR};
-	$fipsdir =~ s/\/$//;
-	}

 # All of the following is disabled by default (RC5 was enabled before 0.9.8):

 my %disabled = ( # "what"         => "comment" [or special keyword "experimental"]
-		 "ec_nistp_64_gcc_128" => "default",
 		 "gmp"		  => "default",
-		 "jpake"          => "experimental",
-		 "libunbound"     => "experimental",
-		 "md2"            => "default",
-		 "rc5"            => "default",
+                 "jpake"          => "experimental",
+                 "md2"            => "default",
+                 "rc5"            => "default",
 		 "rfc3779"	  => "default",
-		 "sctp"       => "default",
-		 "shared"         => "default",
-		 "ssl-trace"	  => "default",
+                 "shared"         => "default",
 		 "store"	  => "experimental",
-		 "unit-test"	  => "default",
-		 "zlib"           => "default",
-		 "zlib-dynamic"   => "default"
-	       );
+                 "zlib"           => "default",
+                 "zlib-dynamic"   => "default"
+               );
 my @experimental = ();

 # This is what $depflags will look like with the above defaults
 # (we need this to see if we should advise the user to run "make depend"):
-my $default_depflags = " -DOPENSSL_NO_EC_NISTP_64_GCC_128 -DOPENSSL_NO_GMP -DOPENSSL_NO_JPAKE -DOPENSSL_NO_LIBUNBOUND -DOPENSSL_NO_MD2 -DOPENSSL_NO_RC5 -DOPENSSL_NO_RFC3779 -DOPENSSL_NO_SCTP -DOPENSSL_NO_SSL_TRACE -DOPENSSL_NO_STORE -DOPENSSL_NO_UNIT_TEST";
+my $default_depflags = " -DOPENSSL_NO_GMP -DOPENSSL_NO_JPAKE -DOPENSSL_NO_MD2 -DOPENSSL_NO_RC5 -DOPENSSL_NO_RFC3779 -DOPENSSL_NO_STORE";

 # Explicit "no-..." options will be collected in %disabled along with the defaults.
 # To remove something from %disabled, use "enable-foo" (unless it's experimental).
@@ -804,7 +740,6 @@ PROCESS_ARGS:

 		# rewrite some options in "enable-..." form
 		s /^-?-?shared$/enable-shared/;
-		s /^sctp$/enable-sctp/;
 		s /^threads$/enable-threads/;
 		s /^zlib$/enable-zlib/;
 		s /^zlib-dynamic$/enable-zlib-dynamic/;
@@ -874,10 +809,6 @@ PROCESS_ARGS:
 			}
 		elsif (/^386$/)
 			{ $processor=386; }
-		elsif (/^fips$/)
-			{
-			$fips=1;
-			}
 		elsif (/^rsaref$/)
 			{
 			# No RSAref support any more since it's not needed.
@@ -886,7 +817,15 @@ PROCESS_ARGS:
 			}
 		elsif (/^[-+]/)
 			{
-			if (/^--prefix=(.*)$/)
+			if (/^-[lL](.*)$/ or /^-Wl,/)
+				{
+				$libs.=$_." ";
+				}
+			elsif (/^-[^-]/ or /^\+/)
+				{
+				$flags.=$_." ";
+				}
+			elsif (/^--prefix=(.*)$/)
 				{
 				$prefix=$1;
 				}
@@ -914,30 +853,14 @@ PROCESS_ARGS:
 				{
 				$withargs{"zlib-include"}="-I$1";
 				}
-			elsif (/^--with-fipsdir=(.*)$/)
-				{
-				$fipsdir="$1";
-				}
-			elsif (/^--with-fipslibdir=(.*)$/)
-				{
-				$fipslibdir="$1";
-				}
-			elsif (/^--with-baseaddr=(.*)$/)
-				{
-				$baseaddr="$1";
-				}
 			elsif (/^--cross-compile-prefix=(.*)$/)
 				{
 				$cross_compile_prefix=$1;
 				}
-			elsif (/^-[lL](.*)$/ or /^-Wl,/)
+			else
 				{
-				$libs.=$_." ";
-				}
-			else	# common if (/^[-+]/), just pass down...
-				{
-				$_ =~ s/%([0-9a-f]{1,2})/chr(hex($1))/gei;
-				$flags.=$_." ";
+				print STDERR $usage;
+				exit(1);
 				}
 			}
 		elsif ($_ =~ /^([^:]+):(.+)$/)
@@ -1004,17 +927,6 @@ if (defined($disabled{"md5"}) || defined($disabled{"rsa"}))
 	$disabled{"ssl2"} = "forced";
 	}

-if ($fips && $fipslibdir eq "")
-	{
-	$fipslibdir = $fipsdir . "/lib/";
-	}
-
-# RSAX ENGINE sets default non-FIPS RSA method.
-if ($fips)
-	{
-	$disabled{"rsax"} = "forced";
-	}
-
 # SSL 3.0 and TLS requires MD5 and SHA and either RSA or DSA+DH
 if (defined($disabled{"md5"}) || defined($disabled{"sha"})
    || (defined($disabled{"rsa"})
@@ -1035,13 +947,6 @@ if (defined($disabled{"ec"}) || defined($disabled{"dsa"})
 	$disabled{"gost"} = "forced";
 	}

-# SRP and HEARTBEATS require TLSEXT
-if (defined($disabled{"tlsext"}))
-	{
-	$disabled{"srp"} = "forced";
-	$disabled{"heartbeats"} = "forced";
-	}
-
 if ($target eq "TABLE") {
 	foreach $target (sort keys %table) {
 		print_table_entry($target);
@@ -1091,7 +996,7 @@ foreach (sort (keys %disabled))
 	else
 		{
 		my ($ALGO, $algo);
-		($ALGO = $algo = $_) =~ tr/[\-a-z]/[_A-Z]/;
+		($ALGO = $algo = $_) =~ tr/[a-z]/[A-Z]/;

 		if (/^asm$/ || /^err$/ || /^hw$/ || /^hw-/)
 			{
@@ -1172,7 +1077,6 @@ my $lflags = $fields[$idx_lflags];
 my $bn_ops = $fields[$idx_bn_ops];
 my $cpuid_obj = $fields[$idx_cpuid_obj];
 my $bn_obj = $fields[$idx_bn_obj];
-my $ec_obj = $fields[$idx_ec_obj];
 my $des_obj = $fields[$idx_des_obj];
 my $aes_obj = $fields[$idx_aes_obj];
 my $bf_obj = $fields[$idx_bf_obj];
@@ -1184,8 +1088,6 @@ my $rmd160_obj = $fields[$idx_rmd160_obj];
 my $rc5_obj = $fields[$idx_rc5_obj];
 my $wp_obj = $fields[$idx_wp_obj];
 my $cmll_obj = $fields[$idx_cmll_obj];
-my $modes_obj = $fields[$idx_modes_obj];
-my $engines_obj = $fields[$idx_engines_obj];
 my $perlasm_scheme = $fields[$idx_perlasm_scheme];
 my $dso_scheme = $fields[$idx_dso_scheme];
 my $shared_target = $fields[$idx_shared_target];
@@ -1218,12 +1120,6 @@ if ($target =~ /^mingw/ && `$cc --target-help 2>&1` !~ m/\-mno\-cygwin/m)
 	$shared_ldflag =~ s/\-mno\-cygwin\s*//;
 	}

-if ($target =~ /linux.*\-mips/ && !$no_asm && $flags !~ /\-m(ips|arch=)/) {
-	# minimally required architecture flags for assembly modules
-	$cflags="-mips2 $cflags" if ($target =~ /mips32/);
-	$cflags="-mips3 $cflags" if ($target =~ /mips64/);
-}
-
 my $no_shared_warn=0;
 my $no_user_cflags=0;

@@ -1350,9 +1246,9 @@ $lflags="$libs$lflags" if ($libs ne "");

 if ($no_asm)
 	{
-	$cpuid_obj=$bn_obj=$ec_obj=
+	$cpuid_obj=$bn_obj=
 	$des_obj=$aes_obj=$bf_obj=$cast_obj=$rc4_obj=$rc5_obj=$cmll_obj=
-	$modes_obj=$sha1_obj=$md5_obj=$rmd160_obj=$wp_obj=$engines_obj="";
+	$sha1_obj=$md5_obj=$rmd160_obj=$wp_obj="";
 	}

 if (!$no_shared)
@@ -1416,7 +1312,7 @@ if (!$IsMK1MF)
 		}
 	}

-$cpuid_obj.=" uplink.o uplink-x86.o" if ($cflags =~ /\-DOPENSSL_USE_APPLINK/);
+$cpuid_obj.=" uplink.o uplink-cof.o" if ($cflags =~ /\-DOPENSSL_USE_APPLINK/);

 #
 # Platform fix-ups
@@ -1431,7 +1327,6 @@ if ($target =~ /\-icc$/)	# Intel C compiler
 		}
 	if ($iccver>=8)
 		{
-		$cflags=~s/\-KPIC/-fPIC/;
 		# Eliminate unnecessary dependency from libirc.a. This is
 		# essential for shared library support, as otherwise
 		# apps/openssl can end up in endless loop upon startup...
@@ -1439,17 +1334,12 @@ if ($target =~ /\-icc$/)	# Intel C compiler
 		}
 	if ($iccver>=9)
 		{
-		$lflags.=" -i-static";
-		$lflags=~s/\-no_cpprt/-no-cpprt/;
+		$cflags.=" -i-static";
+		$cflags=~s/\-no_cpprt/-no-cpprt/;
 		}
 	if ($iccver>=10)
 		{
-		$lflags=~s/\-i\-static/-static-intel/;
-		}
-	if ($iccver>=11)
-		{
-		$cflags.=" -no-intel-extensions";	# disable Cilk
-		$lflags=~s/\-no\-cpprt/-no-cxxlib/;
+		$cflags=~s/\-i\-static/-static-intel/;
 		}
 	}

@@ -1490,14 +1380,6 @@ $cflags.=" -DOPENSSL_BN_ASM_PART_WORDS" if ($bn_obj =~ /bn-586/);
 $cflags.=" -DOPENSSL_IA32_SSE2" if (!$no_sse2 && $bn_obj =~ /86/);

 $cflags.=" -DOPENSSL_BN_ASM_MONT" if ($bn_obj =~ /-mont/);
-$cflags.=" -DOPENSSL_BN_ASM_MONT5" if ($bn_obj =~ /-mont5/);
-$cflags.=" -DOPENSSL_BN_ASM_GF2m" if ($bn_obj =~ /-gf2m/);
-
-if ($fips)
-	{
-	$openssl_other_defines.="#define OPENSSL_FIPS\n";
-	$cflags .= " -I\$(FIPSDIR)/include";
-	}

 $cpuid_obj="mem_clr.o"	unless ($cpuid_obj =~ /\.o$/);
 $des_obj=$des_enc	unless ($des_obj =~ /\.o$/);
@@ -1530,15 +1412,7 @@ if ($rmd160_obj =~ /\.o$/)
 	}
 if ($aes_obj =~ /\.o$/)
 	{
-	$cflags.=" -DAES_ASM" if ($aes_obj =~ m/\baes\-/);;
-	# aes-ctr.o is not a real file, only indication that assembler
-	# module implements AES_ctr32_encrypt...
-	$cflags.=" -DAES_CTR_ASM" if ($aes_obj =~ s/\s*aes\-ctr\.o//);
-	# aes-xts.o indicates presense of AES_xts_[en|de]crypt...
-	$cflags.=" -DAES_XTS_ASM" if ($aes_obj =~ s/\s*aes\-xts\.o//);
-	$aes_obj =~ s/\s*(vpaes|aesni)\-x86\.o//g if ($no_sse2);
-	$cflags.=" -DVPAES_ASM" if ($aes_obj =~ m/vpaes/);
-	$cflags.=" -DBSAES_ASM" if ($aes_obj =~ m/bsaes/);
+	$cflags.=" -DAES_ASM";
 	}
 else	{
 	$aes_obj=$aes_enc;
@@ -1552,14 +1426,6 @@ else	{
 	$wp_obj="wp_block.o";
 	}
 $cmll_obj=$cmll_enc	unless ($cmll_obj =~ /.o$/);
-if ($modes_obj =~ /ghash\-/)
-	{
-	$cflags.=" -DGHASH_ASM";
-	}
-if ($ec_obj =~ /ecp_nistz256/)
-	{
-	$cflags.=" -DECP_NISTZ256_ASM";
-	}

 # "Stringify" the C flags string.  This permits it to be made part of a string
 # and works as well on command lines.
@@ -1663,7 +1529,6 @@ while (<IN>)
 	s/^EXE_EXT=.*$/EXE_EXT= $exe_ext/;
 	s/^CPUID_OBJ=.*$/CPUID_OBJ= $cpuid_obj/;
 	s/^BN_ASM=.*$/BN_ASM= $bn_obj/;
-	s/^EC_ASM=.*$/EC_ASM= $ec_obj/;
 	s/^DES_ENC=.*$/DES_ENC= $des_obj/;
 	s/^AES_ENC=.*$/AES_ENC= $aes_obj/;
 	s/^BF_ENC=.*$/BF_ENC= $bf_obj/;
@@ -1675,8 +1540,6 @@ while (<IN>)
 	s/^RMD160_ASM_OBJ=.*$/RMD160_ASM_OBJ= $rmd160_obj/;
 	s/^WP_ASM_OBJ=.*$/WP_ASM_OBJ= $wp_obj/;
 	s/^CMLL_ENC=.*$/CMLL_ENC= $cmll_obj/;
-	s/^MODES_ASM_OBJ.=*$/MODES_ASM_OBJ= $modes_obj/;
-	s/^ENGINES_ASM_OBJ.=*$/ENGINES_ASM_OBJ= $engines_obj/;
 	s/^PERLASM_SCHEME=.*$/PERLASM_SCHEME= $perlasm_scheme/;
 	s/^PROCESSOR=.*/PROCESSOR= $processor/;
 	s/^ARFLAGS=.*/ARFLAGS= $arflags/;
@@ -1685,12 +1548,6 @@ while (<IN>)
 	s/^LIBKRB5=.*/LIBKRB5=$withargs{"krb5-lib"}/;
 	s/^LIBZLIB=.*/LIBZLIB=$withargs{"zlib-lib"}/;
 	s/^ZLIB_INCLUDE=.*/ZLIB_INCLUDE=$withargs{"zlib-include"}/;
-
-	s/^FIPSDIR=.*/FIPSDIR=$fipsdir/;
-	s/^FIPSLIBDIR=.*/FIPSLIBDIR=$fipslibdir/;
-	s/^FIPSCANLIB=.*/FIPSCANLIB=libcrypto/ if $fips;
-	s/^BASEADDR=.*/BASEADDR=$baseaddr/;
-
 	s/^SHLIB_TARGET=.*/SHLIB_TARGET=$shared_target/;
 	s/^SHLIB_MARK=.*/SHLIB_MARK=$shared_mark/;
 	s/^SHARED_LIBS=.*/SHARED_LIBS=\$(SHARED_CRYPTO) \$(SHARED_SSL)/ if (!$no_shared);
@@ -1725,7 +1582,6 @@ print "CFLAG         =$cflags\n";
 print "EX_LIBS       =$lflags\n";
 print "CPUID_OBJ     =$cpuid_obj\n";
 print "BN_ASM        =$bn_obj\n";
-print "EC_ASM        =$ec_obj\n";
 print "DES_ENC       =$des_obj\n";
 print "AES_ENC       =$aes_obj\n";
 print "BF_ENC        =$bf_obj\n";
@@ -1735,9 +1591,7 @@ print "RC5_ENC       =$rc5_obj\n";
 print "MD5_OBJ_ASM   =$md5_obj\n";
 print "SHA1_OBJ_ASM  =$sha1_obj\n";
 print "RMD160_OBJ_ASM=$rmd160_obj\n";
-print "CMLL_ENC      =$cmll_obj\n";
-print "MODES_OBJ     =$modes_obj\n";
-print "ENGINES_OBJ   =$engines_obj\n";
+print "CMLL_ENC=     =$cmll_obj\n";
 print "PROCESSOR     =$processor\n";
 print "RANLIB        =$ranlib\n";
 print "ARFLAGS       =$arflags\n";
@@ -1799,9 +1653,6 @@ open(OUT,'>crypto/opensslconf.h.new') || die "unable to create crypto/opensslcon
 print OUT "/* opensslconf.h */\n";
 print OUT "/* WARNING: Generated automatically from opensslconf.h.in by Configure. */\n\n";

-print OUT "#ifdef  __cplusplus\n";
-print OUT "extern \"C\" {\n";
-print OUT "#endif\n";
 print OUT "/* OpenSSL was configured with the following options: */\n";
 my $openssl_algorithm_defines_trans = $openssl_algorithm_defines;
 $openssl_experimental_defines =~ s/^\s*#\s*define\s+OPENSSL_NO_(.*)/#ifndef OPENSSL_EXPERIMENTAL_$1\n# ifndef OPENSSL_NO_$1\n#  define OPENSSL_NO_$1\n# endif\n#endif/mg;
@@ -1906,9 +1757,6 @@ while (<IN>)
 		{ print OUT $_; }
 	}
 close(IN);
-print OUT "#ifdef  __cplusplus\n";
-print OUT "}\n";
-print OUT "#endif\n";
 close(OUT);
 rename("crypto/opensslconf.h","crypto/opensslconf.h.bak") || die "unable to rename crypto/opensslconf.h\n" if -e "crypto/opensslconf.h";
 rename("crypto/opensslconf.h.new","crypto/opensslconf.h") || die "unable to rename crypto/opensslconf.h.new\n";
@@ -2024,7 +1872,7 @@ BEGIN
 	    VALUE "ProductVersion", "$version\\0"
 	    // Optional:
 	    //VALUE "Comments", "\\0"
-	    VALUE "LegalCopyright", "Copyright  <EFBFBD> 1998-2005 The OpenSSL Project. Copyright <20> 1995-1998 Eric A. Young, Tim J. Hudson. All rights reserved.\\0"
+	    VALUE "LegalCopyright", "Copyright <20> 1998-2005 The OpenSSL Project. Copyright <20> 1995-1998 Eric A. Young, Tim J. Hudson. All rights reserved.\\0"
 	    //VALUE "LegalTrademarks", "\\0"
 	    //VALUE "PrivateBuild", "\\0"
 	    //VALUE "SpecialBuild", "\\0"
@@ -2133,12 +1981,11 @@ sub print_table_entry
 	{
 	my $target = shift;

-	my ($cc, $cflags, $unistd, $thread_cflag, $sys_id, $lflags,
-	    $bn_ops, $cpuid_obj, $bn_obj, $ec_obj, $des_obj, $aes_obj, $bf_obj,
-	    $md5_obj, $sha1_obj, $cast_obj, $rc4_obj, $rmd160_obj,
-	    $rc5_obj, $wp_obj, $cmll_obj, $modes_obj, $engines_obj,
-	    $perlasm_scheme, $dso_scheme, $shared_target, $shared_cflag,
-	    $shared_ldflag, $shared_extension, $ranlib, $arflags, $multilib)=
+	(my $cc,my $cflags,my $unistd,my $thread_cflag,my $sys_id,my $lflags,
+	my $bn_ops,my $cpuid_obj,my $bn_obj,my $des_obj,my $aes_obj, my $bf_obj,
+	my $md5_obj,my $sha1_obj,my $cast_obj,my $rc4_obj,my $rmd160_obj,
+	my $rc5_obj,my $wp_obj,my $cmll_obj,my $perlasm_scheme,my $dso_scheme,my $shared_target,my $shared_cflag,
+	my $shared_ldflag,my $shared_extension,my $ranlib,my $arflags,my $multilib)=
 	split(/\s*:\s*/,$table{$target} . ":" x 30 , -1);
 			
 	print <<EOF
@@ -2153,7 +2000,6 @@ sub print_table_entry
 \$bn_ops       = $bn_ops
 \$cpuid_obj    = $cpuid_obj
 \$bn_obj       = $bn_obj
-\$ec_obj       = $ec_obj
 \$des_obj      = $des_obj
 \$aes_obj      = $aes_obj
 \$bf_obj       = $bf_obj
@@ -2165,8 +2011,6 @@ sub print_table_entry
 \$rc5_obj      = $rc5_obj
 \$wp_obj       = $wp_obj
 \$cmll_obj     = $cmll_obj
-\$modes_obj    = $modes_obj
-\$engines_obj  = $engines_obj
 \$perlasm_scheme = $perlasm_scheme
 \$dso_scheme   = $dso_scheme
 \$shared_target= $shared_target
--- a/40
+++ b/40
@@ -83,7 +83,7 @@ OpenSSL  -  Frequently Asked Questions
 * Which is the current version of OpenSSL?

 The current version is available from <URL: http://www.openssl.org>.
-OpenSSL 1.0.1a was released on Apr 19th, 2012.
+OpenSSL 1.0.1c was released on Feb 5th, 2013.

 In addition to the current stable release, you can also access daily
 snapshots of the OpenSSL development version at <URL:
@@ -184,18 +184,14 @@ Therefore the answer to the common question "when will feature X be
 backported to OpenSSL 1.0.0/0.9.8?" is "never" but it could appear
 in the next minor release.

-* What happens when the letter release reaches z?
-
-It was decided after the release of OpenSSL 0.9.8y the next version should
-be 0.9.8za then 0.9.8zb and so on.
-
-
 [LEGAL] =======================================================================

 * Do I need patent licenses to use OpenSSL?

-For information on intellectual property rights, please consult a lawyer.
-The OpenSSL team does not offer legal advice.
+The patents section of the README file lists patents that may apply to
+you if you want to use OpenSSL.  For information on intellectual
+property rights, please consult a lawyer.  The OpenSSL team does not
+offer legal advice.

 You can configure OpenSSL so as not to use IDEA, MDC2 and RC5 by using
 ./config no-idea no-mdc2 no-rc5
@@ -612,8 +608,8 @@ valid for the current DOS session.
 * What is special about OpenSSL on Redhat?

 Red Hat Linux (release 7.0 and later) include a preinstalled limited
-version of OpenSSL. Red Hat has chosen to disable support for IDEA, RC5 and
-MDC2 in this version. The same may apply to other Linux distributions.
+version of OpenSSL. For patent reasons, support for IDEA, RC5 and MDC2
+is disabled in this version. The same may apply to other Linux distributions.
 Users may therefore wish to install more or all of the features left out.

 To do this you MUST ensure that you do not overwrite the openssl that is in
@@ -636,6 +632,11 @@ relevant updates in packages up to and including 0.9.6b.
 A possible way around this is to persuade Red Hat to produce a non-US
 version of Red Hat Linux.

+FYI: Patent numbers and expiry dates of US patents:
+MDC-2: 4,908,861 13/03/2007
+IDEA:  5,214,703 25/05/2010
+RC5:   5,724,428 03/03/2015
+

 * Why does the OpenSSL compilation fail on MacOS X?

@@ -861,7 +862,7 @@ The opposite assumes we already have len bytes in buf:
 p = buf;
 p7 = d2i_PKCS7(NULL, &p, len);

-At this point p7 contains a valid PKCS7 structure or NULL if an error
+At this point p7 contains a valid PKCS7 structure of NULL if an error
 occurred. If an error occurred ERR_print_errors(bio) should give more
 information.

@@ -873,21 +874,6 @@ that has been read or written. This may well be uninitialized data
 and attempts to free the buffer will have unpredictable results
 because it no longer points to the same address.

-Memory allocation and encoding can also be combined in a single
-operation by the ASN1 routines:
-
- unsigned char *buf = NULL;	/* mandatory */
- int len;
- len = i2d_PKCS7(p7, &buf);
- if (len < 0)
-	/* Error */
- /* Do some things with 'buf' */
- /* Finished with buf: free it */
- OPENSSL_free(buf);
-
-In this special case the "buf" parameter is *not* incremented, it points
-to the start of the encoding.
-

 * OpenSSL uses DER but I need BER format: does OpenSSL support BER?

--- a/8
+++ b/8
@@ -1,8 +0,0 @@
-#!/bin/sh
-
-BRANCH=`git rev-parse --abbrev-ref HEAD`
-
-./Configure $@ no-symlinks
-make files
-util/mk1mf.pl OUT=out.$BRANCH TMP=tmp.$BRANCH INC=inc.$BRANCH copy > makefile.$BRANCH
-make -f makefile.$BRANCH init
--- a/5
+++ b/5
@@ -1,5 +0,0 @@
-#!/bin/sh
-
-BRANCH=`git rev-parse --abbrev-ref HEAD`
-
-make -f makefile.$BRANCH $@
--- a/Makefile.org
+++ b/Makefile.org
@@ -88,7 +88,6 @@ PROCESSOR=
 # CPUID module collects small commonly used assembler snippets
 CPUID_OBJ= 
 BN_ASM= bn_asm.o
-EC_ASM=
 DES_ENC= des_enc.o fcrypt_b.o
 AES_ENC= aes_core.o aes_cbc.o
 BF_ENC= bf_enc.o
@@ -100,8 +99,6 @@ SHA1_ASM_OBJ=
 RMD160_ASM_OBJ= 
 WP_ASM_OBJ=
 CMLL_ENC=
-MODES_ASM_OBJ=
-ENGINES_ASM_OBJ=
 PERLASM_SCHEME=

 # KRB5 stuff
@@ -112,30 +109,6 @@ LIBKRB5=
 ZLIB_INCLUDE=
 LIBZLIB=

-# TOP level FIPS install directory.
-FIPSDIR=
-
-# This is the location of fipscanister.o and friends.
-# The FIPS module build will place it $(INSTALLTOP)/lib
-# but since $(INSTALLTOP) can only take the default value
-# when the module is built it will be in /usr/local/ssl/lib
-# $(INSTALLTOP) for this build may be different so hard
-# code the path.
-
-FIPSLIBDIR=
-
-# The location of the library which contains fipscanister.o
-# normally it will be libcrypto unless fipsdso is set in which
-# case it will be libfips. If not compiling in FIPS mode at all
-# this is empty making it a useful test for a FIPS compile.
-
-FIPSCANLIB=
-
-# Shared library base address. Currently only used on Windows.
-#
-
-BASEADDR=
-
 DIRS=   crypto ssl engines apps test tools
 ENGDIRS= ccgost
 SHLIBDIRS= crypto ssl
@@ -148,7 +121,7 @@ SDIRS=  \
 	bn ec rsa dsa ecdsa dh ecdh dso engine \
 	buffer bio stack lhash rand err \
 	evp asn1 pem x509 x509v3 conf txt_db pkcs7 pkcs12 comp ocsp ui krb5 \
-	cms pqueue ts jpake srp store cmac
+	cms pqueue ts jpake store
 # keep in mind that the above list is adjusted by ./Configure
 # according to no-xxx arguments...

@@ -222,8 +195,8 @@ BUILDENV=	PLATFORM='$(PLATFORM)' PROCESSOR='$(PROCESSOR)' \
 		EXE_EXT='$(EXE_EXT)' SHARED_LIBS='$(SHARED_LIBS)'	\
 		SHLIB_EXT='$(SHLIB_EXT)' SHLIB_TARGET='$(SHLIB_TARGET)'	\
 		PEX_LIBS='$(PEX_LIBS)' EX_LIBS='$(EX_LIBS)'	\
-		CPUID_OBJ='$(CPUID_OBJ)' BN_ASM='$(BN_ASM)'	\
-		EC_ASM='$(EC_ASM)' DES_ENC='$(DES_ENC)' 	\
+		CPUID_OBJ='$(CPUID_OBJ)'			\
+		BN_ASM='$(BN_ASM)' DES_ENC='$(DES_ENC)' 	\
 		AES_ENC='$(AES_ENC)' CMLL_ENC='$(CMLL_ENC)'	\
 		BF_ENC='$(BF_ENC)' CAST_ENC='$(CAST_ENC)'	\
 		RC4_ENC='$(RC4_ENC)' RC5_ENC='$(RC5_ENC)'	\
@@ -231,12 +204,7 @@ BUILDENV=	PLATFORM='$(PLATFORM)' PROCESSOR='$(PROCESSOR)' \
 		MD5_ASM_OBJ='$(MD5_ASM_OBJ)'			\
 		RMD160_ASM_OBJ='$(RMD160_ASM_OBJ)'		\
 		WP_ASM_OBJ='$(WP_ASM_OBJ)'			\
-		MODES_ASM_OBJ='$(MODES_ASM_OBJ)'		\
-		ENGINES_ASM_OBJ='$(ENGINES_ASM_OBJ)'		\
 		PERLASM_SCHEME='$(PERLASM_SCHEME)'		\
-		FIPSLIBDIR='${FIPSLIBDIR}'			\
-		FIPSDIR='${FIPSDIR}'				\
-		FIPSCANLIB="$${FIPSCANLIB:-$(FIPSCANLIB)}"	\
 		THIS=$${THIS:-$@} MAKEFILE=Makefile MAKEOVERRIDES=
 # MAKEOVERRIDES= effectively "equalizes" GNU-ish and SysV-ish make flavors,
 # which in turn eliminates ambiguities in variable treatment with -e.
@@ -290,21 +258,9 @@ all_testapps: build_libs build_testapps
 build_testapps:
 	@dir=crypto; target=testapps; $(BUILD_ONE_CMD)

-fips_premain_dso$(EXE_EXT): libcrypto.a
-	[ -z "$(FIPSCANLIB)" ] || $(CC) $(CFLAG) -Iinclude \
-		-DFINGERPRINT_PREMAIN_DSO_LOAD -o $@  \
-		$(FIPSLIBDIR)fips_premain.c $(FIPSLIBDIR)fipscanister.o \
-		libcrypto.a $(EX_LIBS)
-
-libcrypto$(SHLIB_EXT): libcrypto.a fips_premain_dso$(EXE_EXT)
+libcrypto$(SHLIB_EXT): libcrypto.a
 	@if [ "$(SHLIB_TARGET)" != "" ]; then \
-		if [ "$(FIPSCANLIB)" = "libcrypto" ]; then \
-			FIPSLD_LIBCRYPTO=libcrypto.a ; \
-			FIPSLD_CC="$(CC)"; CC=$(FIPSDIR)/bin/fipsld; \
-			export CC FIPSLD_CC FIPSLD_LIBCRYPTO; \
-		fi; \
-		$(MAKE) -e SHLIBDIRS=crypto  CC="$${CC:-$(CC)}" build-shared && \
-		(touch -c fips_premain_dso$(EXE_EXT) || :); \
+		$(MAKE) SHLIBDIRS=crypto build-shared; \
 	else \
 		echo "There's no support for shared libraries on this platform" >&2; \
 		exit 1; \
@@ -327,7 +283,7 @@ clean-shared:
 			done; \
 		fi; \
 		( set -x; rm -f lib$$i$(SHLIB_EXT) ); \
-		if expr "$(PLATFORM)" : "Cygwin" >/dev/null; then \
+		if [ "$(PLATFORM)" = "Cygwin" ]; then \
 			( set -x; rm -f cyg$$i$(SHLIB_EXT) lib$$i$(SHLIB_EXT).a ); \
 		fi; \
 	done
@@ -376,11 +332,11 @@ libssl.pc: Makefile
 	    echo 'libdir=$${exec_prefix}/$(LIBDIR)'; \
 	    echo 'includedir=$${prefix}/include'; \
 	    echo ''; \
-	    echo 'Name: OpenSSL-libssl'; \
+	    echo 'Name: OpenSSL'; \
 	    echo 'Description: Secure Sockets Layer and cryptography libraries'; \
 	    echo 'Version: '$(VERSION); \
-	    echo 'Requires.private: libcrypto'; \
-	    echo 'Libs: -L$${libdir} -lssl'; \
+	    echo 'Requires: '; \
+	    echo 'Libs: -L$${libdir} -lssl -lcrypto'; \
 	    echo 'Libs.private: $(EX_LIBS)'; \
 	    echo 'Cflags: -I$${includedir} $(KRB5_INCLUDES)' ) > libssl.pc

@@ -393,7 +349,10 @@ openssl.pc: Makefile
 	    echo 'Name: OpenSSL'; \
 	    echo 'Description: Secure Sockets Layer and cryptography libraries and tools'; \
 	    echo 'Version: '$(VERSION); \
-	    echo 'Requires: libssl libcrypto' ) > openssl.pc
+	    echo 'Requires: '; \
+	    echo 'Libs: -L$${libdir} -lssl -lcrypto'; \
+	    echo 'Libs.private: $(EX_LIBS)'; \
+	    echo 'Cflags: -I$${includedir} $(KRB5_INCLUDES)' ) > openssl.pc

 Makefile: Makefile.org Configure config
 	@echo "Makefile is older than Makefile.org, Configure or config."
@@ -401,7 +360,7 @@ Makefile: Makefile.org Configure config
 	@false

 libclean:
-	rm -f *.map *.so *.so.* *.dylib *.dll engines/*.so engines/*.dll engines/*.dylib *.a engines/*.a */lib */*/lib
+	rm -f *.map *.so *.so.* *.dll engines/*.so engines/*.dll *.a engines/*.a */lib */*/lib

 clean:	libclean
 	rm -f shlib/*.o *.o core a.out fluff rehash.time testlog make.log cctest cctest.c
@@ -443,7 +402,7 @@ rehash.time: certs apps
 		[ -x "apps/openssl.exe" ] && OPENSSL="apps/openssl.exe" || :; \
 		OPENSSL_DEBUG_MEMORY=on; \
 		export OPENSSL OPENSSL_DEBUG_MEMORY; \
-		$(PERL) tools/c_rehash certs/demo) && \
+		$(PERL) tools/c_rehash certs) && \
 		touch rehash.time; \
 	else :; fi

@@ -468,9 +427,9 @@ tags:
 	find . -name '[^.]*.[ch]' | xargs etags -a

 errors:
-	$(PERL) util/ck_errf.pl -strict */*.c */*/*.c
 	$(PERL) util/mkerr.pl -recurse -write
 	(cd engines; $(MAKE) PERL=$(PERL) errors)
+	$(PERL) util/ck_errf.pl */*.c */*/*.c

 stacks:
 	$(PERL) util/mkstack.pl -write
@@ -553,7 +512,7 @@ install_sw:
 	chmod 644 $(INSTALL_PREFIX)$(INSTALLTOP)/include/openssl/$$i ); \
 	done;
 	@set -e; target=install; $(RECURSIVE_BUILD_CMD)
-	@set -e; liblist="$(LIBS)"; for i in $$liblist ;\
+	@set -e; for i in $(LIBS) ;\
 	do \
 		if [ -f "$$i" ]; then \
 		(       echo installing $$i; \
@@ -569,7 +528,11 @@ install_sw:
 		do \
 			if [ -f "$$i" -o -f "$$i.a" ]; then \
 			(       echo installing $$i; \
-				if expr "$(PLATFORM)" : "Cygwin" >/dev/null; then \
+				if [ "$(PLATFORM)" != "Cygwin" ]; then \
+					cp $$i $(INSTALL_PREFIX)$(INSTALLTOP)/$(LIBDIR)/$$i.new; \
+					chmod 555 $(INSTALL_PREFIX)$(INSTALLTOP)/$(LIBDIR)/$$i.new; \
+					mv -f $(INSTALL_PREFIX)$(INSTALLTOP)/$(LIBDIR)/$$i.new $(INSTALL_PREFIX)$(INSTALLTOP)/$(LIBDIR)/$$i; \
+				else \
 					c=`echo $$i | sed 's/^lib\(.*\)\.dll\.a/cyg\1-$(SHLIB_VERSION_NUMBER).dll/'`; \
 					cp $$c $(INSTALL_PREFIX)$(INSTALLTOP)/bin/$$c.new; \
 					chmod 755 $(INSTALL_PREFIX)$(INSTALLTOP)/bin/$$c.new; \
@@ -577,10 +540,6 @@ install_sw:
 					cp $$i $(INSTALL_PREFIX)$(INSTALLTOP)/$(LIBDIR)/$$i.new; \
 					chmod 644 $(INSTALL_PREFIX)$(INSTALLTOP)/$(LIBDIR)/$$i.new; \
 					mv -f $(INSTALL_PREFIX)$(INSTALLTOP)/$(LIBDIR)/$$i.new $(INSTALL_PREFIX)$(INSTALLTOP)/$(LIBDIR)/$$i; \
-				else \
-					cp $$i $(INSTALL_PREFIX)$(INSTALLTOP)/$(LIBDIR)/$$i.new; \
-					chmod 555 $(INSTALL_PREFIX)$(INSTALLTOP)/$(LIBDIR)/$$i.new; \
-					mv -f $(INSTALL_PREFIX)$(INSTALLTOP)/$(LIBDIR)/$$i.new $(INSTALL_PREFIX)$(INSTALLTOP)/$(LIBDIR)/$$i; \
 				fi ); \
 				if expr $(PLATFORM) : 'mingw' > /dev/null; then \
 				(	case $$i in \
@@ -613,10 +572,6 @@ install_sw:

 install_html_docs:
 	here="`pwd`"; \
-	filecase=; \
-	case "$(PLATFORM)" in DJGPP|Cygwin*|mingw*|darwin*-*-cc) \
-		filecase=-i; \
-	esac; \
 	for subdir in apps crypto ssl; do \
 		mkdir -p $(INSTALL_PREFIX)$(HTMLDIR)/$$subdir; \
 		for i in doc/$$subdir/*.pod; do \
@@ -645,9 +600,9 @@ install_docs:
 	@pod2man="`cd ./util; ./pod2mantest $(PERL)`"; \
 	here="`pwd`"; \
 	filecase=; \
-	case "$(PLATFORM)" in DJGPP|Cygwin*|mingw*|darwin*-*-cc) \
+	if [ "$(PLATFORM)" = "DJGPP" -o "$(PLATFORM)" = "Cygwin" -o "$(PLATFORM)" = "mingw" ]; then \
 		filecase=-i; \
-	esac; \
+	fi; \
 	set -e; for i in doc/apps/*.pod; do \
 		fn=`basename $$i .pod`; \
 		sec=`$(PERL) util/extract-section.pl 1 < $$i`; \
--- a/83
+++ b/83
@@ -5,92 +5,43 @@
  This file gives a brief overview of the major changes between each OpenSSL
  release. For more details please read the CHANGES file.

-  Major changes between OpenSSL 1.0.1i and OpenSSL 1.0.2 [in beta]:
+  Major changes between OpenSSL 1.0.0n and OpenSSL 1.0.0o [15 Oct 2014]

-      o Suite B support for TLS 1.2 and DTLS 1.2
-      o Support for DTLS 1.2
-      o TLS automatic EC curve selection.
-      o API to set TLS supported signature algorithms and curves
-      o SSL_CONF configuration API.
-      o TLS Brainpool support.
-      o ALPN support.
-      o CMS support for RSA-PSS, RSA-OAEP, ECDH and X9.42 DH.
+      o Fix for CVE-2014-3513
+      o Fix for CVE-2014-3567
+      o Mitigation for CVE-2014-3566 (SSL protocol vulnerability)
+      o Fix for CVE-2014-3568

-  Major changes between OpenSSL 1.0.1h and OpenSSL 1.0.1i [6 Aug 2014]
+  Major changes between OpenSSL 1.0.0m and OpenSSL 1.0.0n [6 Aug 2014]

-      o Fix for CVE-2014-3512
-      o Fix for CVE-2014-3511
      o Fix for CVE-2014-3510
      o Fix for CVE-2014-3507
      o Fix for CVE-2014-3506
      o Fix for CVE-2014-3505
      o Fix for CVE-2014-3509
-      o Fix for CVE-2014-5139
      o Fix for CVE-2014-3508

-  Major changes between OpenSSL 1.0.1g and OpenSSL 1.0.1h [5 Jun 2014]
+  Known issues in OpenSSL 1.0.0m:
+
+      o EAP-FAST and other applications using tls_session_secret_cb
+        wont resume sessions. Fixed in 1.0.0n-dev
+      o Compilation failure of s3_pkt.c on some platforms due to missing
+        <limits.h> include. Fixed in 1.0.0n-dev
+
+  Major changes between OpenSSL 1.0.0l and OpenSSL 1.0.0m [5 Jun 2014]

      o Fix for CVE-2014-0224
      o Fix for CVE-2014-0221
+      o Fix for CVE-2014-0198
      o Fix for CVE-2014-0195
      o Fix for CVE-2014-3470
+      o Fix for CVE-2014-0076
      o Fix for CVE-2010-5298

-  Major changes between OpenSSL 1.0.1f and OpenSSL 1.0.1g [7 Apr 2014]
+  Major changes between OpenSSL 1.0.0k and OpenSSL 1.0.0l [6 Jan 2014]

-      o Fix for CVE-2014-0160
-      o Add TLS padding extension workaround for broken servers.
-      o Fix for CVE-2014-0076
-
-  Major changes between OpenSSL 1.0.1e and OpenSSL 1.0.1f [6 Jan 2014]
-
-      o Don't include gmt_unix_time in TLS server and client random values
-      o Fix for TLS record tampering bug CVE-2013-4353
-      o Fix for TLS version checking bug CVE-2013-6449
      o Fix for DTLS retransmission bug CVE-2013-6450

-  Major changes between OpenSSL 1.0.1d and OpenSSL 1.0.1e [11 Feb 2013]:
-
-      o Corrected fix for CVE-2013-0169
-
-  Major changes between OpenSSL 1.0.1c and OpenSSL 1.0.1d [4 Feb 2013]:
-
-      o Fix renegotiation in TLS 1.1, 1.2 by using the correct TLS version.
-      o Include the fips configuration module.
-      o Fix OCSP bad key DoS attack CVE-2013-0166
-      o Fix for SSL/TLS/DTLS CBC plaintext recovery attack CVE-2013-0169
-      o Fix for TLS AESNI record handling flaw CVE-2012-2686
-
-  Major changes between OpenSSL 1.0.1b and OpenSSL 1.0.1c [10 May 2012]:
-
-      o Fix TLS/DTLS record length checking bug CVE-2012-2333
-      o Don't attempt to use non-FIPS composite ciphers in FIPS mode.
-
-  Major changes between OpenSSL 1.0.1a and OpenSSL 1.0.1b [26 Apr 2012]:
-
-      o Fix compilation error on non-x86 platforms.
-      o Make FIPS capable OpenSSL ciphers work in non-FIPS mode.
-      o Fix SSL_OP_NO_TLSv1_1 clash with SSL_OP_ALL in OpenSSL 1.0.0
-
-  Major changes between OpenSSL 1.0.1 and OpenSSL 1.0.1a [19 Apr 2012]:
-
-      o Fix for ASN1 overflow bug CVE-2012-2110
-      o Workarounds for some servers that hang on long client hellos.
-      o Fix SEGV in AES code.
-
-  Major changes between OpenSSL 1.0.0h and OpenSSL 1.0.1 [14 Mar 2012]:
-
-      o TLS/DTLS heartbeat support.
-      o SCTP support.
-      o RFC 5705 TLS key material exporter.
-      o RFC 5764 DTLS-SRTP negotiation.
-      o Next Protocol Negotiation.
-      o PSS signatures in certificates, requests and CRLs.
-      o Support for password based recipient info for CMS.
-      o Support TLS v1.2 and TLS v1.1.
-      o Preliminary FIPS capability for unvalidated 2.0 FIPS module.
-      o SRP support.
-
  Major changes between OpenSSL 1.0.0j and OpenSSL 1.0.0k [5 Feb 2013]:

      o Fix for SSL/TLS/DTLS CBC plaintext recovery attack CVE-2013-0169
--- a/40
+++ b/40
@@ -1,5 +1,5 @@

- OpenSSL 1.0.2-beta3 25 Sep 2014
+ OpenSSL 1.0.0o 15 Oct 2014

 Copyright (c) 1998-2011 The OpenSSL Project
 Copyright (c) 1995-1998 Eric A. Young, Tim J. Hudson
@@ -90,6 +90,32 @@
        SSL/TLS Client and Server Tests
        Handling of S/MIME signed or encrypted mail

+
+ PATENTS
+ -------
+
+ Various companies hold various patents for various algorithms in various
+ locations around the world. _YOU_ are responsible for ensuring that your use
+ of any algorithms is legal by checking if there are any patents in your
+ country.  The file contains some of the patents that we know about or are
+ rumored to exist. This is not a definitive list.
+
+ RSA Security holds software patents on the RC5 algorithm.  If you
+ intend to use this cipher, you must contact RSA Security for
+ licensing conditions. Their web page is http://www.rsasecurity.com/.
+
+ RC4 is a trademark of RSA Security, so use of this label should perhaps
+ only be used with RSA Security's permission.
+
+ The IDEA algorithm is patented by Ascom in Austria, France, Germany, Italy,
+ Japan, the Netherlands, Spain, Sweden, Switzerland, UK and the USA.  They
+ should be contacted if that algorithm is to be used; their web page is
+ http://www.ascom.ch/.
+
+ NTT and Mitsubishi have patents and pending patents on the Camellia
+ algorithm, but allow use at no charge without requiring an explicit
+ licensing agreement: http://info.isl.ntt.co.jp/crypt/eng/info/chiteki.html
+
 INSTALLATION
 ------------

@@ -135,7 +161,8 @@
    - Problem Description (steps that will reproduce the problem, if known)
    - Stack Traceback (if the application dumps core)

- Email the report to:
+ Report the bug to the OpenSSL project via the Request Tracker
+ (http://www.openssl.org/support/rt.html) by mail to:

    openssl-bugs@openssl.org

@@ -143,11 +170,10 @@
 or support queries. Just because something doesn't work the way you expect
 does not mean it is necessarily a bug in OpenSSL.

- Note that mail to openssl-bugs@openssl.org is recorded in the public
- request tracker database (see https://www.openssl.org/support/rt.html
- for details) and also forwarded to a public mailing list. Confidential
- mail may be sent to openssl-security@openssl.org (PGP key available from
- the key servers).
+ Note that mail to openssl-bugs@openssl.org is recorded in the publicly
+ readable request tracker database and is forwarded to a public
+ mailing list. Confidential mail may be sent to openssl-security@openssl.org
+ (PGP key available from the key servers).

 HOW TO CONTRIBUTE TO OpenSSL
 ----------------------------
--- a/1972
+++ b/1972
--- a/apps/Makefile
+++ b/apps/Makefile
@@ -39,7 +39,7 @@ E_EXE=	verify asn1pars req dgst dh dhparam enc passwd gendh errstr \
 	ca crl rsa rsautl dsa dsaparam ec ecparam \
 	x509 genrsa gendsa genpkey s_server s_client speed \
 	s_time version pkcs7 cms crl2pkcs7 sess_id ciphers nseq pkcs12 \
-	pkcs8 pkey pkeyparam pkeyutl spkac smime rand engine ocsp prime ts srp
+	pkcs8 pkey pkeyparam pkeyutl spkac smime rand engine ocsp prime ts

 PROGS= $(PROGRAM).c

@@ -56,7 +56,7 @@ E_OBJ=	verify.o asn1pars.o req.o dgst.o dh.o dhparam.o enc.o passwd.o gendh.o er
 	x509.o genrsa.o gendsa.o genpkey.o s_server.o s_client.o speed.o \
 	s_time.o $(A_OBJ) $(S_OBJ) $(RAND_OBJ) version.o sess_id.o \
 	ciphers.o nseq.o pkcs12.o pkcs8.o pkey.o pkeyparam.o pkeyutl.o \
-	spkac.o smime.o cms.o rand.o engine.o ocsp.o prime.o ts.o srp.o
+	spkac.o smime.o cms.o rand.o engine.o ocsp.o prime.o ts.o

 E_SRC=	verify.c asn1pars.c req.c dgst.c dh.c enc.c passwd.c gendh.c errstr.c ca.c \
 	pkcs7.c crl2p7.c crl.c \
@@ -64,7 +64,7 @@ E_SRC=	verify.c asn1pars.c req.c dgst.c dh.c enc.c passwd.c gendh.c errstr.c ca.
 	x509.c genrsa.c gendsa.c genpkey.c s_server.c s_client.c speed.c \
 	s_time.c $(A_SRC) $(S_SRC) $(RAND_SRC) version.c sess_id.c \
 	ciphers.c nseq.c pkcs12.c pkcs8.c pkey.c pkeyparam.c pkeyutl.c \
-	spkac.c smime.c cms.c rand.c engine.c ocsp.c prime.c ts.c srp.c
+	spkac.c smime.c cms.c rand.c engine.c ocsp.c prime.c ts.c

 SRC=$(E_SRC)

@@ -153,8 +153,6 @@ $(EXE): progs.h $(E_OBJ) $(PROGRAM).o $(DLIBCRYPTO) $(DLIBSSL)
 	$(RM) $(EXE)
 	shlib_target=; if [ -n "$(SHARED_LIBS)" ]; then \
 		shlib_target="$(SHLIB_TARGET)"; \
-	elif [ -n "$(FIPSCANLIB)" ]; then \
-	  FIPSLD_CC="$(CC)"; CC=$(FIPSDIR)/bin/fipsld; export CC FIPSLD_CC; \
 	fi; \
 	LIBRARIES="$(LIBSSL) $(LIBKRB5) $(LIBCRYPTO)" ; \
 	$(MAKE) -f $(TOP)/Makefile.shared -e \
@@ -247,13 +245,13 @@ ciphers.o: ../include/openssl/opensslconf.h ../include/openssl/opensslv.h
 ciphers.o: ../include/openssl/ossl_typ.h ../include/openssl/pem.h
 ciphers.o: ../include/openssl/pem2.h ../include/openssl/pkcs7.h
 ciphers.o: ../include/openssl/pqueue.h ../include/openssl/safestack.h
-ciphers.o: ../include/openssl/sha.h ../include/openssl/srtp.h
-ciphers.o: ../include/openssl/ssl.h ../include/openssl/ssl2.h
-ciphers.o: ../include/openssl/ssl23.h ../include/openssl/ssl3.h
-ciphers.o: ../include/openssl/stack.h ../include/openssl/symhacks.h
-ciphers.o: ../include/openssl/tls1.h ../include/openssl/txt_db.h
-ciphers.o: ../include/openssl/x509.h ../include/openssl/x509_vfy.h
-ciphers.o: ../include/openssl/x509v3.h apps.h ciphers.c
+ciphers.o: ../include/openssl/sha.h ../include/openssl/ssl.h
+ciphers.o: ../include/openssl/ssl2.h ../include/openssl/ssl23.h
+ciphers.o: ../include/openssl/ssl3.h ../include/openssl/stack.h
+ciphers.o: ../include/openssl/symhacks.h ../include/openssl/tls1.h
+ciphers.o: ../include/openssl/txt_db.h ../include/openssl/x509.h
+ciphers.o: ../include/openssl/x509_vfy.h ../include/openssl/x509v3.h apps.h
+ciphers.o: ciphers.c
 cms.o: ../e_os.h ../include/openssl/asn1.h ../include/openssl/bio.h
 cms.o: ../include/openssl/buffer.h ../include/openssl/cms.h
 cms.o: ../include/openssl/conf.h ../include/openssl/crypto.h
@@ -429,13 +427,13 @@ engine.o: ../include/openssl/opensslconf.h ../include/openssl/opensslv.h
 engine.o: ../include/openssl/ossl_typ.h ../include/openssl/pem.h
 engine.o: ../include/openssl/pem2.h ../include/openssl/pkcs7.h
 engine.o: ../include/openssl/pqueue.h ../include/openssl/safestack.h
-engine.o: ../include/openssl/sha.h ../include/openssl/srtp.h
-engine.o: ../include/openssl/ssl.h ../include/openssl/ssl2.h
-engine.o: ../include/openssl/ssl23.h ../include/openssl/ssl3.h
-engine.o: ../include/openssl/stack.h ../include/openssl/symhacks.h
-engine.o: ../include/openssl/tls1.h ../include/openssl/txt_db.h
-engine.o: ../include/openssl/x509.h ../include/openssl/x509_vfy.h
-engine.o: ../include/openssl/x509v3.h apps.h engine.c
+engine.o: ../include/openssl/sha.h ../include/openssl/ssl.h
+engine.o: ../include/openssl/ssl2.h ../include/openssl/ssl23.h
+engine.o: ../include/openssl/ssl3.h ../include/openssl/stack.h
+engine.o: ../include/openssl/symhacks.h ../include/openssl/tls1.h
+engine.o: ../include/openssl/txt_db.h ../include/openssl/x509.h
+engine.o: ../include/openssl/x509_vfy.h ../include/openssl/x509v3.h apps.h
+engine.o: engine.c
 errstr.o: ../e_os.h ../include/openssl/asn1.h ../include/openssl/bio.h
 errstr.o: ../include/openssl/buffer.h ../include/openssl/comp.h
 errstr.o: ../include/openssl/conf.h ../include/openssl/crypto.h
@@ -450,13 +448,13 @@ errstr.o: ../include/openssl/opensslconf.h ../include/openssl/opensslv.h
 errstr.o: ../include/openssl/ossl_typ.h ../include/openssl/pem.h
 errstr.o: ../include/openssl/pem2.h ../include/openssl/pkcs7.h
 errstr.o: ../include/openssl/pqueue.h ../include/openssl/safestack.h
-errstr.o: ../include/openssl/sha.h ../include/openssl/srtp.h
-errstr.o: ../include/openssl/ssl.h ../include/openssl/ssl2.h
-errstr.o: ../include/openssl/ssl23.h ../include/openssl/ssl3.h
-errstr.o: ../include/openssl/stack.h ../include/openssl/symhacks.h
-errstr.o: ../include/openssl/tls1.h ../include/openssl/txt_db.h
-errstr.o: ../include/openssl/x509.h ../include/openssl/x509_vfy.h
-errstr.o: ../include/openssl/x509v3.h apps.h errstr.c
+errstr.o: ../include/openssl/sha.h ../include/openssl/ssl.h
+errstr.o: ../include/openssl/ssl2.h ../include/openssl/ssl23.h
+errstr.o: ../include/openssl/ssl3.h ../include/openssl/stack.h
+errstr.o: ../include/openssl/symhacks.h ../include/openssl/tls1.h
+errstr.o: ../include/openssl/txt_db.h ../include/openssl/x509.h
+errstr.o: ../include/openssl/x509_vfy.h ../include/openssl/x509v3.h apps.h
+errstr.o: errstr.c
 gendh.o: ../e_os.h ../include/openssl/asn1.h ../include/openssl/bio.h
 gendh.o: ../include/openssl/bn.h ../include/openssl/buffer.h
 gendh.o: ../include/openssl/conf.h ../include/openssl/crypto.h
@@ -558,12 +556,12 @@ ocsp.o: ../include/openssl/opensslv.h ../include/openssl/ossl_typ.h
 ocsp.o: ../include/openssl/pem.h ../include/openssl/pem2.h
 ocsp.o: ../include/openssl/pkcs7.h ../include/openssl/pqueue.h
 ocsp.o: ../include/openssl/safestack.h ../include/openssl/sha.h
-ocsp.o: ../include/openssl/srtp.h ../include/openssl/ssl.h
-ocsp.o: ../include/openssl/ssl2.h ../include/openssl/ssl23.h
-ocsp.o: ../include/openssl/ssl3.h ../include/openssl/stack.h
-ocsp.o: ../include/openssl/symhacks.h ../include/openssl/tls1.h
-ocsp.o: ../include/openssl/txt_db.h ../include/openssl/x509.h
-ocsp.o: ../include/openssl/x509_vfy.h ../include/openssl/x509v3.h apps.h ocsp.c
+ocsp.o: ../include/openssl/ssl.h ../include/openssl/ssl2.h
+ocsp.o: ../include/openssl/ssl23.h ../include/openssl/ssl3.h
+ocsp.o: ../include/openssl/stack.h ../include/openssl/symhacks.h
+ocsp.o: ../include/openssl/tls1.h ../include/openssl/txt_db.h
+ocsp.o: ../include/openssl/x509.h ../include/openssl/x509_vfy.h
+ocsp.o: ../include/openssl/x509v3.h apps.h ocsp.c
 openssl.o: ../e_os.h ../include/openssl/asn1.h ../include/openssl/bio.h
 openssl.o: ../include/openssl/buffer.h ../include/openssl/comp.h
 openssl.o: ../include/openssl/conf.h ../include/openssl/crypto.h
@@ -577,9 +575,8 @@ openssl.o: ../include/openssl/objects.h ../include/openssl/ocsp.h
 openssl.o: ../include/openssl/opensslconf.h ../include/openssl/opensslv.h
 openssl.o: ../include/openssl/ossl_typ.h ../include/openssl/pem.h
 openssl.o: ../include/openssl/pem2.h ../include/openssl/pkcs7.h
-openssl.o: ../include/openssl/pqueue.h ../include/openssl/rand.h
-openssl.o: ../include/openssl/safestack.h ../include/openssl/sha.h
-openssl.o: ../include/openssl/srtp.h ../include/openssl/ssl.h
+openssl.o: ../include/openssl/pqueue.h ../include/openssl/safestack.h
+openssl.o: ../include/openssl/sha.h ../include/openssl/ssl.h
 openssl.o: ../include/openssl/ssl2.h ../include/openssl/ssl23.h
 openssl.o: ../include/openssl/ssl3.h ../include/openssl/stack.h
 openssl.o: ../include/openssl/symhacks.h ../include/openssl/tls1.h
@@ -794,13 +791,12 @@ s_cb.o: ../include/openssl/ossl_typ.h ../include/openssl/pem.h
 s_cb.o: ../include/openssl/pem2.h ../include/openssl/pkcs7.h
 s_cb.o: ../include/openssl/pqueue.h ../include/openssl/rand.h
 s_cb.o: ../include/openssl/safestack.h ../include/openssl/sha.h
-s_cb.o: ../include/openssl/srtp.h ../include/openssl/ssl.h
-s_cb.o: ../include/openssl/ssl2.h ../include/openssl/ssl23.h
-s_cb.o: ../include/openssl/ssl3.h ../include/openssl/stack.h
-s_cb.o: ../include/openssl/symhacks.h ../include/openssl/tls1.h
-s_cb.o: ../include/openssl/txt_db.h ../include/openssl/x509.h
-s_cb.o: ../include/openssl/x509_vfy.h ../include/openssl/x509v3.h apps.h
-s_cb.o: s_apps.h s_cb.c
+s_cb.o: ../include/openssl/ssl.h ../include/openssl/ssl2.h
+s_cb.o: ../include/openssl/ssl23.h ../include/openssl/ssl3.h
+s_cb.o: ../include/openssl/stack.h ../include/openssl/symhacks.h
+s_cb.o: ../include/openssl/tls1.h ../include/openssl/txt_db.h
+s_cb.o: ../include/openssl/x509.h ../include/openssl/x509_vfy.h
+s_cb.o: ../include/openssl/x509v3.h apps.h s_apps.h s_cb.c
 s_client.o: ../e_os.h ../include/openssl/asn1.h ../include/openssl/bio.h
 s_client.o: ../include/openssl/bn.h ../include/openssl/buffer.h
 s_client.o: ../include/openssl/comp.h ../include/openssl/conf.h
@@ -816,8 +812,7 @@ s_client.o: ../include/openssl/opensslv.h ../include/openssl/ossl_typ.h
 s_client.o: ../include/openssl/pem.h ../include/openssl/pem2.h
 s_client.o: ../include/openssl/pkcs7.h ../include/openssl/pqueue.h
 s_client.o: ../include/openssl/rand.h ../include/openssl/safestack.h
-s_client.o: ../include/openssl/sha.h ../include/openssl/srp.h
-s_client.o: ../include/openssl/srtp.h ../include/openssl/ssl.h
+s_client.o: ../include/openssl/sha.h ../include/openssl/ssl.h
 s_client.o: ../include/openssl/ssl2.h ../include/openssl/ssl23.h
 s_client.o: ../include/openssl/ssl3.h ../include/openssl/stack.h
 s_client.o: ../include/openssl/symhacks.h ../include/openssl/tls1.h
@@ -841,7 +836,6 @@ s_server.o: ../include/openssl/pem.h ../include/openssl/pem2.h
 s_server.o: ../include/openssl/pkcs7.h ../include/openssl/pqueue.h
 s_server.o: ../include/openssl/rand.h ../include/openssl/rsa.h
 s_server.o: ../include/openssl/safestack.h ../include/openssl/sha.h
-s_server.o: ../include/openssl/srp.h ../include/openssl/srtp.h
 s_server.o: ../include/openssl/ssl.h ../include/openssl/ssl2.h
 s_server.o: ../include/openssl/ssl23.h ../include/openssl/ssl3.h
 s_server.o: ../include/openssl/stack.h ../include/openssl/symhacks.h
@@ -863,13 +857,13 @@ s_socket.o: ../include/openssl/opensslconf.h ../include/openssl/opensslv.h
 s_socket.o: ../include/openssl/ossl_typ.h ../include/openssl/pem.h
 s_socket.o: ../include/openssl/pem2.h ../include/openssl/pkcs7.h
 s_socket.o: ../include/openssl/pqueue.h ../include/openssl/safestack.h
-s_socket.o: ../include/openssl/sha.h ../include/openssl/srtp.h
-s_socket.o: ../include/openssl/ssl.h ../include/openssl/ssl2.h
-s_socket.o: ../include/openssl/ssl23.h ../include/openssl/ssl3.h
-s_socket.o: ../include/openssl/stack.h ../include/openssl/symhacks.h
-s_socket.o: ../include/openssl/tls1.h ../include/openssl/txt_db.h
-s_socket.o: ../include/openssl/x509.h ../include/openssl/x509_vfy.h
-s_socket.o: ../include/openssl/x509v3.h apps.h s_apps.h s_socket.c
+s_socket.o: ../include/openssl/sha.h ../include/openssl/ssl.h
+s_socket.o: ../include/openssl/ssl2.h ../include/openssl/ssl23.h
+s_socket.o: ../include/openssl/ssl3.h ../include/openssl/stack.h
+s_socket.o: ../include/openssl/symhacks.h ../include/openssl/tls1.h
+s_socket.o: ../include/openssl/txt_db.h ../include/openssl/x509.h
+s_socket.o: ../include/openssl/x509_vfy.h ../include/openssl/x509v3.h apps.h
+s_socket.o: s_apps.h s_socket.c
 s_time.o: ../e_os.h ../include/openssl/asn1.h ../include/openssl/bio.h
 s_time.o: ../include/openssl/buffer.h ../include/openssl/comp.h
 s_time.o: ../include/openssl/conf.h ../include/openssl/crypto.h
@@ -884,13 +878,13 @@ s_time.o: ../include/openssl/opensslconf.h ../include/openssl/opensslv.h
 s_time.o: ../include/openssl/ossl_typ.h ../include/openssl/pem.h
 s_time.o: ../include/openssl/pem2.h ../include/openssl/pkcs7.h
 s_time.o: ../include/openssl/pqueue.h ../include/openssl/safestack.h
-s_time.o: ../include/openssl/sha.h ../include/openssl/srtp.h
-s_time.o: ../include/openssl/ssl.h ../include/openssl/ssl2.h
-s_time.o: ../include/openssl/ssl23.h ../include/openssl/ssl3.h
-s_time.o: ../include/openssl/stack.h ../include/openssl/symhacks.h
-s_time.o: ../include/openssl/tls1.h ../include/openssl/txt_db.h
-s_time.o: ../include/openssl/x509.h ../include/openssl/x509_vfy.h
-s_time.o: ../include/openssl/x509v3.h apps.h s_apps.h s_time.c
+s_time.o: ../include/openssl/sha.h ../include/openssl/ssl.h
+s_time.o: ../include/openssl/ssl2.h ../include/openssl/ssl23.h
+s_time.o: ../include/openssl/ssl3.h ../include/openssl/stack.h
+s_time.o: ../include/openssl/symhacks.h ../include/openssl/tls1.h
+s_time.o: ../include/openssl/txt_db.h ../include/openssl/x509.h
+s_time.o: ../include/openssl/x509_vfy.h ../include/openssl/x509v3.h apps.h
+s_time.o: s_apps.h s_time.c
 sess_id.o: ../e_os.h ../include/openssl/asn1.h ../include/openssl/bio.h
 sess_id.o: ../include/openssl/buffer.h ../include/openssl/comp.h
 sess_id.o: ../include/openssl/conf.h ../include/openssl/crypto.h
@@ -905,13 +899,13 @@ sess_id.o: ../include/openssl/opensslconf.h ../include/openssl/opensslv.h
 sess_id.o: ../include/openssl/ossl_typ.h ../include/openssl/pem.h
 sess_id.o: ../include/openssl/pem2.h ../include/openssl/pkcs7.h
 sess_id.o: ../include/openssl/pqueue.h ../include/openssl/safestack.h
-sess_id.o: ../include/openssl/sha.h ../include/openssl/srtp.h
-sess_id.o: ../include/openssl/ssl.h ../include/openssl/ssl2.h
-sess_id.o: ../include/openssl/ssl23.h ../include/openssl/ssl3.h
-sess_id.o: ../include/openssl/stack.h ../include/openssl/symhacks.h
-sess_id.o: ../include/openssl/tls1.h ../include/openssl/txt_db.h
-sess_id.o: ../include/openssl/x509.h ../include/openssl/x509_vfy.h
-sess_id.o: ../include/openssl/x509v3.h apps.h sess_id.c
+sess_id.o: ../include/openssl/sha.h ../include/openssl/ssl.h
+sess_id.o: ../include/openssl/ssl2.h ../include/openssl/ssl23.h
+sess_id.o: ../include/openssl/ssl3.h ../include/openssl/stack.h
+sess_id.o: ../include/openssl/symhacks.h ../include/openssl/tls1.h
+sess_id.o: ../include/openssl/txt_db.h ../include/openssl/x509.h
+sess_id.o: ../include/openssl/x509_vfy.h ../include/openssl/x509v3.h apps.h
+sess_id.o: sess_id.c
 smime.o: ../e_os.h ../include/openssl/asn1.h ../include/openssl/bio.h
 smime.o: ../include/openssl/buffer.h ../include/openssl/conf.h
 smime.o: ../include/openssl/crypto.h ../include/openssl/e_os2.h
@@ -941,19 +935,19 @@ speed.o: ../include/openssl/err.h ../include/openssl/evp.h
 speed.o: ../include/openssl/hmac.h ../include/openssl/idea.h
 speed.o: ../include/openssl/lhash.h ../include/openssl/md4.h
 speed.o: ../include/openssl/md5.h ../include/openssl/mdc2.h
-speed.o: ../include/openssl/modes.h ../include/openssl/obj_mac.h
-speed.o: ../include/openssl/objects.h ../include/openssl/ocsp.h
-speed.o: ../include/openssl/opensslconf.h ../include/openssl/opensslv.h
-speed.o: ../include/openssl/ossl_typ.h ../include/openssl/pkcs7.h
-speed.o: ../include/openssl/rand.h ../include/openssl/rc2.h
-speed.o: ../include/openssl/rc4.h ../include/openssl/ripemd.h
-speed.o: ../include/openssl/rsa.h ../include/openssl/safestack.h
-speed.o: ../include/openssl/seed.h ../include/openssl/sha.h
-speed.o: ../include/openssl/stack.h ../include/openssl/symhacks.h
-speed.o: ../include/openssl/txt_db.h ../include/openssl/ui.h
-speed.o: ../include/openssl/ui_compat.h ../include/openssl/whrlpool.h
-speed.o: ../include/openssl/x509.h ../include/openssl/x509_vfy.h
-speed.o: ../include/openssl/x509v3.h apps.h speed.c testdsa.h testrsa.h
+speed.o: ../include/openssl/obj_mac.h ../include/openssl/objects.h
+speed.o: ../include/openssl/ocsp.h ../include/openssl/opensslconf.h
+speed.o: ../include/openssl/opensslv.h ../include/openssl/ossl_typ.h
+speed.o: ../include/openssl/pkcs7.h ../include/openssl/rand.h
+speed.o: ../include/openssl/rc2.h ../include/openssl/rc4.h
+speed.o: ../include/openssl/ripemd.h ../include/openssl/rsa.h
+speed.o: ../include/openssl/safestack.h ../include/openssl/seed.h
+speed.o: ../include/openssl/sha.h ../include/openssl/stack.h
+speed.o: ../include/openssl/symhacks.h ../include/openssl/txt_db.h
+speed.o: ../include/openssl/ui.h ../include/openssl/ui_compat.h
+speed.o: ../include/openssl/whrlpool.h ../include/openssl/x509.h
+speed.o: ../include/openssl/x509_vfy.h ../include/openssl/x509v3.h apps.h
+speed.o: speed.c testdsa.h testrsa.h
 spkac.o: ../e_os.h ../include/openssl/asn1.h ../include/openssl/bio.h
 spkac.o: ../include/openssl/buffer.h ../include/openssl/conf.h
 spkac.o: ../include/openssl/crypto.h ../include/openssl/e_os2.h
@@ -970,21 +964,6 @@ spkac.o: ../include/openssl/stack.h ../include/openssl/symhacks.h
 spkac.o: ../include/openssl/txt_db.h ../include/openssl/x509.h
 spkac.o: ../include/openssl/x509_vfy.h ../include/openssl/x509v3.h apps.h
 spkac.o: spkac.c
-srp.o: ../e_os.h ../include/openssl/asn1.h ../include/openssl/bio.h
-srp.o: ../include/openssl/bn.h ../include/openssl/buffer.h
-srp.o: ../include/openssl/conf.h ../include/openssl/crypto.h
-srp.o: ../include/openssl/e_os2.h ../include/openssl/ec.h
-srp.o: ../include/openssl/ecdh.h ../include/openssl/ecdsa.h
-srp.o: ../include/openssl/engine.h ../include/openssl/err.h
-srp.o: ../include/openssl/evp.h ../include/openssl/lhash.h
-srp.o: ../include/openssl/obj_mac.h ../include/openssl/objects.h
-srp.o: ../include/openssl/ocsp.h ../include/openssl/opensslconf.h
-srp.o: ../include/openssl/opensslv.h ../include/openssl/ossl_typ.h
-srp.o: ../include/openssl/pkcs7.h ../include/openssl/safestack.h
-srp.o: ../include/openssl/sha.h ../include/openssl/srp.h
-srp.o: ../include/openssl/stack.h ../include/openssl/symhacks.h
-srp.o: ../include/openssl/txt_db.h ../include/openssl/x509.h
-srp.o: ../include/openssl/x509_vfy.h ../include/openssl/x509v3.h apps.h srp.c
 ts.o: ../e_os.h ../include/openssl/asn1.h ../include/openssl/bio.h
 ts.o: ../include/openssl/bn.h ../include/openssl/buffer.h
 ts.o: ../include/openssl/conf.h ../include/openssl/crypto.h
--- a/apps/apps.c
+++ b/apps/apps.c
@@ -118,7 +118,7 @@
 #include <stdio.h>
 #include <stdlib.h>
 #include <string.h>
-#if !defined(OPENSSL_SYSNAME_WIN32) && !defined(OPENSSL_SYSNAME_WINCE) && !defined(NETWARE_CLIB)
+#if !defined(OPENSSL_SYSNAME_WIN32) && !defined(NETWARE_CLIB)
 #include <strings.h>
 #endif
 #include <sys/types.h>
@@ -275,8 +275,6 @@ int str2fmt(char *s)
 		return(FORMAT_PKCS12);
 	else if ((*s == 'E') || (*s == 'e'))
 		return(FORMAT_ENGINE);
-	else if ((*s == 'H') || (*s == 'h'))
-		return FORMAT_HTTP;
 	else if ((*s == 'P') || (*s == 'p'))
 		{
 		if (s[1] == 'V' || s[1] == 'v')
@@ -787,80 +785,12 @@ static int load_pkcs12(BIO *err, BIO *in, const char *desc,
 	return ret;
 	}

-int load_cert_crl_http(const char *url, BIO *err,
-					X509 **pcert, X509_CRL **pcrl)
-	{
-	char *host = NULL, *port = NULL, *path = NULL;
-	BIO *bio = NULL;
-	OCSP_REQ_CTX *rctx = NULL;
-	int use_ssl, rv = 0;
-	if (!OCSP_parse_url(url, &host, &port, &path, &use_ssl))
-		goto err;
-	if (use_ssl)
-		{
-		if (err)
-			BIO_puts(err, "https not supported\n");
-		goto err;
-		}
-	bio = BIO_new_connect(host);
-	if (!bio || !BIO_set_conn_port(bio, port))
-		goto err;
-	rctx = OCSP_REQ_CTX_new(bio, 1024);
-	if (!rctx)
-		goto err;
-	if (!OCSP_REQ_CTX_http(rctx, "GET", path))
-		goto err;
-	if (!OCSP_REQ_CTX_add1_header(rctx, "Host", host))
-		goto err;
-	if (pcert)
-		{
-		do
-			{
-			rv = X509_http_nbio(rctx, pcert);
-			}
-		while (rv == -1);
-		}
-	else
-		{
-		do
-			{
-			rv = X509_CRL_http_nbio(rctx, pcrl);
-			} while (rv == -1);
-		}
-
-	err:
-	if (host)
-		OPENSSL_free(host);
-	if (path)
-		OPENSSL_free(path);
-	if (port)
-		OPENSSL_free(port);
-	if (bio)
-		BIO_free_all(bio);
-	if (rctx)
-		OCSP_REQ_CTX_free(rctx);
-	if (rv != 1)
-		{
-		if (bio && err)
-			BIO_printf(bio_err, "Error loading %s from %s\n",
-					pcert ? "certificate" : "CRL", url);
-		ERR_print_errors(bio_err);
-		}
-	return rv;
-	}
-
 X509 *load_cert(BIO *err, const char *file, int format,
 	const char *pass, ENGINE *e, const char *cert_descrip)
 	{
 	X509 *x=NULL;
 	BIO *cert;

-	if (format == FORMAT_HTTP)
-		{
-		load_cert_crl_http(file, err, &x, NULL);
-		return x;
-		}
-
 	if ((cert=BIO_new(BIO_s_file())) == NULL)
 		{
 		ERR_print_errors(err);
@@ -931,55 +861,6 @@ end:
 	return(x);
 	}

-X509_CRL *load_crl(const char *infile, int format)
-	{
-	X509_CRL *x=NULL;
-	BIO *in=NULL;
-
-	if (format == FORMAT_HTTP)
-		{
-		load_cert_crl_http(infile, bio_err, NULL, &x);
-		return x;
-		}
-
-	in=BIO_new(BIO_s_file());
-	if (in == NULL)
-		{
-		ERR_print_errors(bio_err);
-		goto end;
-		}
-
-	if (infile == NULL)
-		BIO_set_fp(in,stdin,BIO_NOCLOSE);
-	else
-		{
-		if (BIO_read_filename(in,infile) <= 0)
-			{
-			perror(infile);
-			goto end;
-			}
-		}
-	if 	(format == FORMAT_ASN1)
-		x=d2i_X509_CRL_bio(in,NULL);
-	else if (format == FORMAT_PEM)
-		x=PEM_read_bio_X509_CRL(in,NULL,NULL,NULL);
-	else	{
-		BIO_printf(bio_err,"bad input format specified for input crl\n");
-		goto end;
-		}
-	if (x == NULL)
-		{
-		BIO_printf(bio_err,"unable to load CRL\n");
-		ERR_print_errors(bio_err);
-		goto end;
-		}
-	
-end:
-	BIO_free(in);
-	return(x);
-	}
-
-
 EVP_PKEY *load_key(BIO *err, const char *file, int format, int maybe_stdin,
 	const char *pass, ENGINE *e, const char *key_descrip)
 	{
@@ -2384,10 +2265,6 @@ int args_verify(char ***pargs, int *pargc,
 	int purpose = 0, depth = -1;
 	char **oldargs = *pargs;
 	char *arg = **pargs, *argn = (*pargs)[1];
-	time_t at_time = 0;
-	char *hostname = NULL;
-	char *email = NULL;
-	char *ipasc = NULL;
 	if (!strcmp(arg, "-policy"))
 		{
 		if (!argn)
@@ -2440,48 +2317,6 @@ int args_verify(char ***pargs, int *pargc,
 			}
 		(*pargs)++;
 		}
-	else if (strcmp(arg,"-attime") == 0)
-		{
-		if (!argn)
-			*badarg = 1;
-		else
-			{
-			long timestamp;
-			/* interpret the -attime argument as seconds since
-			 * Epoch */
-			if (sscanf(argn, "%li", &timestamp) != 1)
-				{
-				BIO_printf(bio_err,
-						"Error parsing timestamp %s\n",
-					   	argn);
-				*badarg = 1;
-				}
-			/* on some platforms time_t may be a float */
-			at_time = (time_t) timestamp;
-			}
-		(*pargs)++;
-		}
-	else if (strcmp(arg,"-verify_hostname") == 0)
-		{
-		if (!argn)
-			*badarg = 1;
-		hostname = argn;
-		(*pargs)++;
-		}
-	else if (strcmp(arg,"-verify_email") == 0)
-		{
-		if (!argn)
-			*badarg = 1;
-		email = argn;
-		(*pargs)++;
-		}
-	else if (strcmp(arg,"-verify_ip") == 0)
-		{
-		if (!argn)
-			*badarg = 1;
-		ipasc = argn;
-		(*pargs)++;
-		}
 	else if (!strcmp(arg, "-ignore_critical"))
 		flags |= X509_V_FLAG_IGNORE_CRITICAL;
 	else if (!strcmp(arg, "-issuer_checks"))
@@ -2508,16 +2343,6 @@ int args_verify(char ***pargs, int *pargc,
 		flags |= X509_V_FLAG_NOTIFY_POLICY;
 	else if (!strcmp(arg, "-check_ss_sig"))
 		flags |= X509_V_FLAG_CHECK_SS_SIGNATURE;
-	else if (!strcmp(arg, "-trusted_first"))
-		flags |= X509_V_FLAG_TRUSTED_FIRST;
-	else if (!strcmp(arg, "-suiteB_128_only"))
-		flags |= X509_V_FLAG_SUITEB_128_LOS_ONLY;
-	else if (!strcmp(arg, "-suiteB_128"))
-		flags |= X509_V_FLAG_SUITEB_128_LOS;
-	else if (!strcmp(arg, "-suiteB_192"))
-		flags |= X509_V_FLAG_SUITEB_192_LOS;
-	else if (!strcmp(arg, "-partial_chain"))
-		flags |= X509_V_FLAG_PARTIAL_CHAIN;
 	else
 		return 0;

@@ -2546,18 +2371,6 @@ int args_verify(char ***pargs, int *pargc,
 	if (depth >= 0)
 		X509_VERIFY_PARAM_set_depth(*pm, depth);

-	if (at_time) 
-		X509_VERIFY_PARAM_set_time(*pm, at_time);
-
-	if (hostname && !X509_VERIFY_PARAM_set1_host(*pm, hostname, 0))
-		*badarg = 1;
-
-	if (email && !X509_VERIFY_PARAM_set1_email(*pm, email, 0))
-		*badarg = 1;
-
-	if (ipasc && !X509_VERIFY_PARAM_set1_ip_asc(*pm, ipasc))
-		*badarg = 1;
-
 	end:

 	(*pargs)++;
@@ -2850,9 +2663,6 @@ void jpake_client_auth(BIO *out, BIO *conn, const char *secret)

 	BIO_puts(out, "JPAKE authentication succeeded, setting PSK\n");

-	if (psk_key)
-		OPENSSL_free(psk_key);
-
 	psk_key = BN_bn2hex(JPAKE_get_shared_key(ctx));

 	BIO_pop(bconn);
@@ -2882,9 +2692,6 @@ void jpake_server_auth(BIO *out, BIO *conn, const char *secret)

 	BIO_puts(out, "JPAKE authentication succeeded, setting PSK\n");

-	if (psk_key)
-		OPENSSL_free(psk_key);
-
 	psk_key = BN_bn2hex(JPAKE_get_shared_key(ctx));

 	BIO_pop(bconn);
@@ -2895,157 +2702,6 @@ void jpake_server_auth(BIO *out, BIO *conn, const char *secret)

 #endif

-#ifndef OPENSSL_NO_TLSEXT
-/* next_protos_parse parses a comma separated list of strings into a string
- * in a format suitable for passing to SSL_CTX_set_next_protos_advertised.
- *   outlen: (output) set to the length of the resulting buffer on success.
- *   err: (maybe NULL) on failure, an error message line is written to this BIO.
- *   in: a NUL termianted string like "abc,def,ghi"
- *
- *   returns: a malloced buffer or NULL on failure.
- */
-unsigned char *next_protos_parse(unsigned short *outlen, const char *in)
-	{
-	size_t len;
-	unsigned char *out;
-	size_t i, start = 0;
-
-	len = strlen(in);
-	if (len >= 65535)
-		return NULL;
-
-	out = OPENSSL_malloc(strlen(in) + 1);
-	if (!out)
-		return NULL;
-
-	for (i = 0; i <= len; ++i)
-		{
-		if (i == len || in[i] == ',')
-			{
-			if (i - start > 255)
-				{
-				OPENSSL_free(out);
-				return NULL;
-				}
-			out[start] = i - start;
-			start = i + 1;
-			}
-		else
-			out[i+1] = in[i];
-		}
-
-	*outlen = len + 1;
-	return out;
-	}
-#endif  /* ndef OPENSSL_NO_TLSEXT */
-
-void print_cert_checks(BIO *bio, X509 *x,
-				const char *checkhost,
-				const char *checkemail,
-				const char *checkip)
-	{
-	if (x == NULL)
-		return;
-	if (checkhost)
-		{
-		BIO_printf(bio, "Hostname %s does%s match certificate\n",
-				checkhost,
-				X509_check_host(x, checkhost, 0, 0, NULL)
-						? "" : " NOT");
-		}
-
-	if (checkemail)
-		{
-		BIO_printf(bio, "Email %s does%s match certificate\n",
-				checkemail, X509_check_email(x, checkemail, 0,
-						0) ? "" : " NOT");
-		}
-
-	if (checkip)
-		{
-		BIO_printf(bio, "IP %s does%s match certificate\n",
-				checkip, X509_check_ip_asc(x, checkip,
-						0) ? "" : " NOT");
-		}
-	}
-
-/* Get first http URL from a DIST_POINT structure */
-
-static const char *get_dp_url(DIST_POINT *dp)
-	{
-	GENERAL_NAMES *gens;
-	GENERAL_NAME *gen;
-	int i, gtype;
-	ASN1_STRING *uri;
-	if (!dp->distpoint || dp->distpoint->type != 0)
-		return NULL;
-	gens = dp->distpoint->name.fullname;
-	for (i = 0; i < sk_GENERAL_NAME_num(gens); i++)
-		{
-		gen = sk_GENERAL_NAME_value(gens, i);
-		uri = GENERAL_NAME_get0_value(gen, &gtype);
-		if (gtype == GEN_URI && ASN1_STRING_length(uri) > 6)
-			{
-			char *uptr = (char *)ASN1_STRING_data(uri);
-			if (!strncmp(uptr, "http://", 7))
-				return uptr;
-			}
-		}		
-	return NULL;
-	}
-		
-
-/* Look through a CRLDP structure and attempt to find an http URL to downloads
- * a CRL from.
- */
-
-static X509_CRL *load_crl_crldp(STACK_OF(DIST_POINT) *crldp)
-	{
-	int i;
-	const char *urlptr = NULL;
-	for (i = 0; i < sk_DIST_POINT_num(crldp); i++)
-		{
-		DIST_POINT *dp = sk_DIST_POINT_value(crldp, i);
-		urlptr = get_dp_url(dp);
-		if (urlptr)
-			return load_crl(urlptr, FORMAT_HTTP);
-		}
-	return NULL;
-	}
-
-/* Example of downloading CRLs from CRLDP: not usable for real world
- * as it always downloads, doesn't support non-blocking I/O and doesn't
- * cache anything.
- */
-
-static STACK_OF(X509_CRL) *crls_http_cb(X509_STORE_CTX *ctx, X509_NAME *nm)
-	{
-	X509 *x;
-	STACK_OF(X509_CRL) *crls = NULL;
-	X509_CRL *crl;
-	STACK_OF(DIST_POINT) *crldp;
-	x = X509_STORE_CTX_get_current_cert(ctx);
-	crldp = X509_get_ext_d2i(x, NID_crl_distribution_points, NULL, NULL);
-	crl = load_crl_crldp(crldp);
-	sk_DIST_POINT_pop_free(crldp, DIST_POINT_free);
-	if (!crl)
-		return NULL;
-	crls = sk_X509_CRL_new_null();
-	sk_X509_CRL_push(crls, crl);
-	/* Try to download delta CRL */
-	crldp = X509_get_ext_d2i(x, NID_freshest_crl, NULL, NULL);
-	crl = load_crl_crldp(crldp);
-	sk_DIST_POINT_pop_free(crldp, DIST_POINT_free);
-	if (crl)
-		sk_X509_CRL_push(crls, crl);
-	return crls;
-	}
-
-void store_setup_crl_download(X509_STORE *st)
-	{
-	X509_STORE_set_lookup_crls_cb(st, crls_http_cb);
-	}
-
 /*
 * Platform-specific sections
 */
--- a/apps/apps.h
+++ b/apps/apps.h
@@ -188,7 +188,6 @@ extern BIO *bio_err;
 			do { CONF_modules_unload(1); destroy_ui_method(); \
 			OBJ_cleanup(); EVP_cleanup(); ENGINE_cleanup(); \
 			CRYPTO_cleanup_all_ex_data(); ERR_remove_thread_state(NULL); \
-			RAND_cleanup(); \
 			ERR_free_strings(); zlib_cleanup();} while(0)
 #  else
 #    define apps_startup() \
@@ -199,12 +198,11 @@ extern BIO *bio_err;
 			do { CONF_modules_unload(1); destroy_ui_method(); \
 			OBJ_cleanup(); EVP_cleanup(); \
 			CRYPTO_cleanup_all_ex_data(); ERR_remove_thread_state(NULL); \
-			RAND_cleanup(); \
 			ERR_free_strings(); zlib_cleanup(); } while(0)
 #  endif
 #endif

-#if defined(OPENSSL_SYSNAME_WIN32) || defined(OPENSSL_SYSNAME_WINCE)
+#ifdef OPENSSL_SYSNAME_WIN32
 #  define openssl_fdset(a,b) FD_SET((unsigned int)a, b)
 #else
 #  define openssl_fdset(a,b) FD_SET(a, b)
@@ -247,9 +245,6 @@ int app_passwd(BIO *err, char *arg1, char *arg2, char **pass1, char **pass2);
 int add_oid_section(BIO *err, CONF *conf);
 X509 *load_cert(BIO *err, const char *file, int format,
 	const char *pass, ENGINE *e, const char *cert_descrip);
-X509_CRL *load_crl(const char *infile, int format);
-int load_cert_crl_http(const char *url, BIO *err,
-					X509 **pcert, X509_CRL **pcrl);
 EVP_PKEY *load_key(BIO *err, const char *file, int format, int maybe_stdin,
 	const char *pass, ENGINE *e, const char *key_descrip);
 EVP_PKEY *load_pubkey(BIO *err, const char *file, int format, int maybe_stdin,
@@ -265,10 +260,9 @@ ENGINE *setup_engine(BIO *err, const char *engine, int debug);

 #ifndef OPENSSL_NO_OCSP
 OCSP_RESPONSE *process_responder(BIO *err, OCSP_REQUEST *req,
-				 const char *host, const char *path,
-				 const char *port, int use_ssl,
-				 const STACK_OF(CONF_VALUE) *headers,
-				 int req_timeout);
+			char *host, char *path, char *port, int use_ssl,
+			STACK_OF(CONF_VALUE) *headers,
+			int req_timeout);
 #endif

 int load_config(BIO *err, CONF *cnf);
@@ -323,12 +317,6 @@ int bio_to_mem(unsigned char **out, int maxlen, BIO *in);
 int pkey_ctrl_string(EVP_PKEY_CTX *ctx, char *value);
 int init_gen_str(BIO *err, EVP_PKEY_CTX **pctx,
 			const char *algname, ENGINE *e, int do_param);
-int do_X509_sign(BIO *err, X509 *x, EVP_PKEY *pkey, const EVP_MD *md,
-			STACK_OF(OPENSSL_STRING) *sigopts);
-int do_X509_REQ_sign(BIO *err, X509_REQ *x, EVP_PKEY *pkey, const EVP_MD *md,
-			STACK_OF(OPENSSL_STRING) *sigopts);
-int do_X509_CRL_sign(BIO *err, X509_CRL *x, EVP_PKEY *pkey, const EVP_MD *md,
-			STACK_OF(OPENSSL_STRING) *sigopts);
 #ifndef OPENSSL_NO_PSK
 extern char *psk_key;
 #endif
@@ -337,17 +325,6 @@ void jpake_client_auth(BIO *out, BIO *conn, const char *secret);
 void jpake_server_auth(BIO *out, BIO *conn, const char *secret);
 #endif

-#ifndef OPENSSL_NO_TLSEXT
-unsigned char *next_protos_parse(unsigned short *outlen, const char *in);
-#endif  /* ndef OPENSSL_NO_TLSEXT */
-
-void print_cert_checks(BIO *bio, X509 *x,
-				const char *checkhost,
-				const char *checkemail,
-				const char *checkip);
-
-void store_setup_crl_download(X509_STORE *st);
-
 #define FORMAT_UNDEF    0
 #define FORMAT_ASN1     1
 #define FORMAT_TEXT     2
@@ -362,7 +339,6 @@ void store_setup_crl_download(X509_STORE *st);
 #define FORMAT_ASN1RSA	10	/* DER RSAPubicKey format */
 #define FORMAT_MSBLOB	11	/* MS Key blob format */
 #define FORMAT_PVK	12	/* MS PVK file format */
-#define FORMAT_HTTP	13	/* Download using HTTP */

 #define EXT_COPY_NONE	0
 #define EXT_COPY_ADD	1
@@ -381,7 +357,4 @@ int raw_write_stdout(const void *,int);
 #define TM_START	0
 #define TM_STOP		1
 double app_tminterval (int stop,int usertime);
-
-#define OPENSSL_NO_SSL_INTERN
-
 #endif
--- a/apps/ca.c
+++ b/apps/ca.c
@@ -197,30 +197,26 @@ extern int EF_ALIGNMENT;

 static void lookup_fail(const char *name, const char *tag);
 static int certify(X509 **xret, char *infile,EVP_PKEY *pkey,X509 *x509,
-		   const EVP_MD *dgst,STACK_OF(OPENSSL_STRING) *sigopts,
-		   STACK_OF(CONF_VALUE) *policy,CA_DB *db,
+		   const EVP_MD *dgst,STACK_OF(CONF_VALUE) *policy,CA_DB *db,
 		   BIGNUM *serial, char *subj,unsigned long chtype, int multirdn, int email_dn, char *startdate,
 		   char *enddate, long days, int batch, char *ext_sect, CONF *conf,
 		   int verbose, unsigned long certopt, unsigned long nameopt,
 		   int default_op, int ext_copy, int selfsign);
 static int certify_cert(X509 **xret, char *infile,EVP_PKEY *pkey,X509 *x509,
-			const EVP_MD *dgst,STACK_OF(OPENSSL_STRING) *sigopts,
-			STACK_OF(CONF_VALUE) *policy,
+			const EVP_MD *dgst,STACK_OF(CONF_VALUE) *policy,
 			CA_DB *db, BIGNUM *serial, char *subj,unsigned long chtype, int multirdn, int email_dn,
 			char *startdate, char *enddate, long days, int batch,
 			char *ext_sect, CONF *conf,int verbose, unsigned long certopt,
 			unsigned long nameopt, int default_op, int ext_copy,
 			ENGINE *e);
 static int certify_spkac(X509 **xret, char *infile,EVP_PKEY *pkey,X509 *x509,
-			 const EVP_MD *dgst,STACK_OF(OPENSSL_STRING) *sigopts,
-			 STACK_OF(CONF_VALUE) *policy,
+			 const EVP_MD *dgst,STACK_OF(CONF_VALUE) *policy,
 			 CA_DB *db, BIGNUM *serial,char *subj,unsigned long chtype, int multirdn, int email_dn,
 			 char *startdate, char *enddate, long days, char *ext_sect,
 			 CONF *conf, int verbose, unsigned long certopt, 
 			 unsigned long nameopt, int default_op, int ext_copy);
 static void write_new_certificate(BIO *bp, X509 *x, int output_der, int notext);
 static int do_body(X509 **xret, EVP_PKEY *pkey, X509 *x509, const EVP_MD *dgst,
-	STACK_OF(OPENSSL_STRING) *sigopts,
 	STACK_OF(CONF_VALUE) *policy, CA_DB *db, BIGNUM *serial,char *subj,unsigned long chtype, int multirdn,
 	int email_dn, char *startdate, char *enddate, long days, int batch,
       	int verbose, X509_REQ *req, char *ext_sect, CONF *conf,
@@ -315,7 +311,6 @@ int MAIN(int argc, char **argv)
 	const EVP_MD *dgst=NULL;
 	STACK_OF(CONF_VALUE) *attribs=NULL;
 	STACK_OF(X509) *cert_sk=NULL;
-	STACK_OF(OPENSSL_STRING) *sigopts = NULL;
 #undef BSIZE
 #define BSIZE 256
 	MS_STATIC char buf[3][BSIZE];
@@ -440,15 +435,6 @@ EF_ALIGNMENT=0;
 			if (--argc < 1) goto bad;
 			outdir= *(++argv);
 			}
-		else if (strcmp(*argv,"-sigopt") == 0)
-			{
-			if (--argc < 1)
-				goto bad;
-			if (!sigopts)
-				sigopts = sk_OPENSSL_STRING_new_null();
-			if (!sigopts || !sk_OPENSSL_STRING_push(sigopts, *(++argv)))
-				goto bad;
-			}
 		else if (strcmp(*argv,"-notext") == 0)
 			notext=1;
 		else if (strcmp(*argv,"-batch") == 0)
@@ -501,12 +487,6 @@ EF_ALIGNMENT=0;
 			infile= *(++argv);
 			dorevoke=1;
 			}
-		else if (strcmp(*argv,"-valid") == 0)
-			{
-			if (--argc < 1) goto bad;
-			infile= *(++argv);
-			dorevoke=2;
-			}
 		else if (strcmp(*argv,"-extensions") == 0)
 			{
 			if (--argc < 1) goto bad;
@@ -1190,9 +1170,8 @@ bad:
 		if (spkac_file != NULL)
 			{
 			total++;
-			j=certify_spkac(&x,spkac_file,pkey,x509,dgst,sigopts,
-				attribs,db, serial,subj,chtype,multirdn,
-				email_dn,startdate,enddate,days,extensions,
+			j=certify_spkac(&x,spkac_file,pkey,x509,dgst,attribs,db,
+				serial,subj,chtype,multirdn,email_dn,startdate,enddate,days,extensions,
 				conf,verbose,certopt,nameopt,default_op,ext_copy);
 			if (j < 0) goto err;
 			if (j > 0)
@@ -1215,8 +1194,7 @@ bad:
 		if (ss_cert_file != NULL)
 			{
 			total++;
-			j=certify_cert(&x,ss_cert_file,pkey,x509,dgst,sigopts,
-				attribs,
+			j=certify_cert(&x,ss_cert_file,pkey,x509,dgst,attribs,
 				db,serial,subj,chtype,multirdn,email_dn,startdate,enddate,days,batch,
 				extensions,conf,verbose, certopt, nameopt,
 				default_op, ext_copy, e);
@@ -1236,7 +1214,7 @@ bad:
 		if (infile != NULL)
 			{
 			total++;
-			j=certify(&x,infile,pkey,x509p,dgst,sigopts, attribs,db,
+			j=certify(&x,infile,pkey,x509p,dgst,attribs,db,
 				serial,subj,chtype,multirdn,email_dn,startdate,enddate,days,batch,
 				extensions,conf,verbose, certopt, nameopt,
 				default_op, ext_copy, selfsign);
@@ -1256,7 +1234,7 @@ bad:
 		for (i=0; i<argc; i++)
 			{
 			total++;
-			j=certify(&x,argv[i],pkey,x509p,dgst,sigopts,attribs,db,
+			j=certify(&x,argv[i],pkey,x509p,dgst,attribs,db,
 				serial,subj,chtype,multirdn,email_dn,startdate,enddate,days,batch,
 				extensions,conf,verbose, certopt, nameopt,
 				default_op, ext_copy, selfsign);
@@ -1414,7 +1392,6 @@ bad:
 			if (!NCONF_get_number(conf,section,
 				ENV_DEFAULT_CRL_HOURS, &crlhours))
 				crlhours = 0;
-			ERR_clear_error();
 			}
 		if ((crldays == 0) && (crlhours == 0) && (crlsec == 0))
 			{
@@ -1506,7 +1483,7 @@ bad:
 			crlnumber = NULL;
 			}

-		if (!do_X509_CRL_sign(bio_err,crl,pkey,dgst,sigopts)) goto err;
+		if (!X509_CRL_sign(crl,pkey,dgst)) goto err;

 		PEM_write_bio_X509_CRL(Sout,crl);

@@ -1529,8 +1506,6 @@ bad:
 				NULL, e, infile);
 			if (revcert == NULL)
 				goto err;
-			if (dorevoke == 2)
-				rev_type = -1;
 			j=do_revoke(revcert,db, rev_type, rev_arg);
 			if (j <= 0) goto err;
 			X509_free(revcert);
@@ -1562,8 +1537,6 @@ err:
 	BN_free(serial);
 	BN_free(crlnumber);
 	free_index(db);
-	if (sigopts)
-		sk_OPENSSL_STRING_free(sigopts);
 	EVP_PKEY_free(pkey);
 	if (x509) X509_free(x509);
 	X509_CRL_free(crl);
@@ -1580,10 +1553,8 @@ static void lookup_fail(const char *name, const char *tag)
 	}

 static int certify(X509 **xret, char *infile, EVP_PKEY *pkey, X509 *x509,
-	     const EVP_MD *dgst, STACK_OF(OPENSSL_STRING) *sigopts,
-	     STACK_OF(CONF_VALUE) *policy, CA_DB *db,
-	     BIGNUM *serial, char *subj,unsigned long chtype, int multirdn,
-	     int email_dn, char *startdate, char *enddate,
+	     const EVP_MD *dgst, STACK_OF(CONF_VALUE) *policy, CA_DB *db,
+	     BIGNUM *serial, char *subj,unsigned long chtype, int multirdn, int email_dn, char *startdate, char *enddate,
 	     long days, int batch, char *ext_sect, CONF *lconf, int verbose,
 	     unsigned long certopt, unsigned long nameopt, int default_op,
 	     int ext_copy, int selfsign)
@@ -1641,8 +1612,7 @@ static int certify(X509 **xret, char *infile, EVP_PKEY *pkey, X509 *x509,
 	else
 		BIO_printf(bio_err,"Signature ok\n");

-	ok=do_body(xret,pkey,x509,dgst,sigopts, policy,db,serial,subj,chtype,
-		multirdn, email_dn,
+	ok=do_body(xret,pkey,x509,dgst,policy,db,serial,subj,chtype,multirdn, email_dn,
 		startdate,enddate,days,batch,verbose,req,ext_sect,lconf,
 		certopt, nameopt, default_op, ext_copy, selfsign);

@@ -1653,8 +1623,7 @@ err:
 	}

 static int certify_cert(X509 **xret, char *infile, EVP_PKEY *pkey, X509 *x509,
-	     const EVP_MD *dgst, STACK_OF(OPENSSL_STRING) *sigopts,
-	     STACK_OF(CONF_VALUE) *policy, CA_DB *db,
+	     const EVP_MD *dgst, STACK_OF(CONF_VALUE) *policy, CA_DB *db,
 	     BIGNUM *serial, char *subj, unsigned long chtype, int multirdn, int email_dn, char *startdate, char *enddate,
 	     long days, int batch, char *ext_sect, CONF *lconf, int verbose,
 	     unsigned long certopt, unsigned long nameopt, int default_op,
@@ -1697,7 +1666,7 @@ static int certify_cert(X509 **xret, char *infile, EVP_PKEY *pkey, X509 *x509,
 	if ((rreq=X509_to_X509_REQ(req,NULL,EVP_md5())) == NULL)
 		goto err;

-	ok=do_body(xret,pkey,x509,dgst,sigopts,policy,db,serial,subj,chtype,multirdn,email_dn,startdate,enddate,
+	ok=do_body(xret,pkey,x509,dgst,policy,db,serial,subj,chtype,multirdn,email_dn,startdate,enddate,
 		days,batch,verbose,rreq,ext_sect,lconf, certopt, nameopt, default_op,
 		ext_copy, 0);

@@ -1708,8 +1677,7 @@ err:
 	}

 static int do_body(X509 **xret, EVP_PKEY *pkey, X509 *x509, const EVP_MD *dgst,
-	     STACK_OF(OPENSSL_STRING) *sigopts, STACK_OF(CONF_VALUE) *policy,
-             CA_DB *db, BIGNUM *serial, char *subj,
+	     STACK_OF(CONF_VALUE) *policy, CA_DB *db, BIGNUM *serial, char *subj,
 	     unsigned long chtype, int multirdn,
 	     int email_dn, char *startdate, char *enddate, long days, int batch,
 	     int verbose, X509_REQ *req, char *ext_sect, CONF *lconf,
@@ -2054,13 +2022,7 @@ again2:

 	if (enddate == NULL)
 		X509_time_adj_ex(X509_get_notAfter(ret),days, 0, NULL);
-	else
-		{
-		int tdays;
-		ASN1_TIME_set_string(X509_get_notAfter(ret),enddate);
-		ASN1_TIME_diff(&tdays, NULL, NULL, X509_get_notAfter(ret));
-		days = tdays;
-		}
+	else ASN1_TIME_set_string(X509_get_notAfter(ret),enddate);

 	if (!X509_set_subject_name(ret,subject)) goto err;

@@ -2186,7 +2148,7 @@ again2:
 		EVP_PKEY_copy_parameters(pktmp,pkey);
 	EVP_PKEY_free(pktmp);

-	if (!do_X509_sign(bio_err, ret,pkey,dgst, sigopts))
+	if (!X509_sign(ret,pkey,dgst))
 		goto err;

 	/* We now just add it to the database */
@@ -2280,8 +2242,7 @@ static void write_new_certificate(BIO *bp, X509 *x, int output_der, int notext)
 	}

 static int certify_spkac(X509 **xret, char *infile, EVP_PKEY *pkey, X509 *x509,
-	     const EVP_MD *dgst, STACK_OF(OPENSSL_STRING) *sigopts,
-	     STACK_OF(CONF_VALUE) *policy, CA_DB *db,
+	     const EVP_MD *dgst, STACK_OF(CONF_VALUE) *policy, CA_DB *db,
 	     BIGNUM *serial, char *subj,unsigned long chtype, int multirdn, int email_dn, char *startdate, char *enddate,
 	     long days, char *ext_sect, CONF *lconf, int verbose, unsigned long certopt,
 	     unsigned long nameopt, int default_op, int ext_copy)
@@ -2407,9 +2368,9 @@ static int certify_spkac(X509 **xret, char *infile, EVP_PKEY *pkey, X509 *x509,

 	X509_REQ_set_pubkey(req,pktmp);
 	EVP_PKEY_free(pktmp);
-	ok=do_body(xret,pkey,x509,dgst,sigopts,policy,db,serial,subj,chtype,
-		   multirdn,email_dn,startdate,enddate, days,1,verbose,req,
-		   ext_sect,lconf, certopt, nameopt, default_op, ext_copy, 0);
+	ok=do_body(xret,pkey,x509,dgst,policy,db,serial,subj,chtype,multirdn,email_dn,startdate,enddate,
+		   days,1,verbose,req,ext_sect,lconf, certopt, nameopt, default_op,
+			ext_copy, 0);
 err:
 	if (req != NULL) X509_REQ_free(req);
 	if (parms != NULL) CONF_free(parms);
@@ -2502,10 +2463,7 @@ static int do_revoke(X509 *x509, CA_DB *db, int type, char *value)
 			}

 		/* Revoke Certificate */
-		if (type == -1)
-			ok = 1;
-		else
-			ok = do_revoke(x509,db, type, value);
+		ok = do_revoke(x509,db, type, value);

 		goto err;

@@ -2516,12 +2474,6 @@ static int do_revoke(X509 *x509, CA_DB *db, int type, char *value)
 			   row[DB_name]);
 		goto err;
 		}
-	else if (type == -1)
-		{
-		BIO_printf(bio_err,"ERROR:Already present, serial number %s\n",
-			   row[DB_serial]);
-		goto err;
-		}
 	else if (rrow[DB_type][0]=='R')
 		{
 		BIO_printf(bio_err,"ERROR:Already revoked, serial number %s\n",
--- a/apps/ciphers.c
+++ b/apps/ciphers.c
@@ -85,9 +85,6 @@ int MAIN(int argc, char **argv)
 	{
 	int ret=1,i;
 	int verbose=0,Verbose=0;
-#ifndef OPENSSL_NO_SSL_TRACE
-	int stdname = 0;
-#endif
 	const char **pp;
 	const char *p;
 	int badops=0;
@@ -123,10 +120,6 @@ int MAIN(int argc, char **argv)
 			verbose=1;
 		else if (strcmp(*argv,"-V") == 0)
 			verbose=Verbose=1;
-#ifndef OPENSSL_NO_SSL_TRACE
-		else if (strcmp(*argv,"-stdname") == 0)
-			stdname=verbose=1;
-#endif
 #ifndef OPENSSL_NO_SSL2
 		else if (strcmp(*argv,"-ssl2") == 0)
 			meth=SSLv2_client_method();
@@ -197,7 +190,7 @@ int MAIN(int argc, char **argv)
 			
 			if (Verbose)
 				{
-				unsigned long id = SSL_CIPHER_get_id(c);
+				unsigned long id = c->id;
 				int id0 = (int)(id >> 24);
 				int id1 = (int)((id >> 16) & 0xffL);
 				int id2 = (int)((id >> 8) & 0xffL);
@@ -210,15 +203,7 @@ int MAIN(int argc, char **argv)
 				else
 					BIO_printf(STDout, "0x%02X,0x%02X,0x%02X,0x%02X - ", id0, id1, id2, id3); /* whatever */
 				}
-#ifndef OPENSSL_NO_SSL_TRACE
-			if (stdname)
-				{
-				const char *nm = SSL_CIPHER_standard_name(c);
-				if (nm == NULL)
-					nm = "UNKNOWN";
-				BIO_printf(STDout, "%s - ", nm);
-				}
-#endif
+
 			BIO_puts(STDout,SSL_CIPHER_description(c,buf,sizeof buf));
 			}
 		}
--- a/apps/client.pem
+++ b/apps/client.pem
@@ -1,52 +1,24 @@
-subject= C = UK, O = OpenSSL Group, OU = FOR TESTING PURPOSES ONLY, CN = Test Client Cert
-issuer= C = UK, O = OpenSSL Group, OU = FOR TESTING PURPOSES ONLY, CN = OpenSSL Test Intermediate CA
+issuer= /C=AU/ST=Queensland/O=CryptSoft Pty Ltd/CN=Test CA (1024 bit)
+subject=/C=AU/ST=Queensland/O=CryptSoft Pty Ltd/CN=Client test cert (512 bit)
 -----BEGIN CERTIFICATE-----
-MIID5zCCAs+gAwIBAgIJALnu1NlVpZ6yMA0GCSqGSIb3DQEBBQUAMHAxCzAJBgNV
-BAYTAlVLMRYwFAYDVQQKDA1PcGVuU1NMIEdyb3VwMSIwIAYDVQQLDBlGT1IgVEVT
-VElORyBQVVJQT1NFUyBPTkxZMSUwIwYDVQQDDBxPcGVuU1NMIFRlc3QgSW50ZXJt
-ZWRpYXRlIENBMB4XDTExMTIwODE0MDE0OFoXDTIxMTAxNjE0MDE0OFowZDELMAkG
-A1UEBhMCVUsxFjAUBgNVBAoMDU9wZW5TU0wgR3JvdXAxIjAgBgNVBAsMGUZPUiBU
-RVNUSU5HIFBVUlBPU0VTIE9OTFkxGTAXBgNVBAMMEFRlc3QgQ2xpZW50IENlcnQw
-ggEiMA0GCSqGSIb3DQEBAQUAA4IBDwAwggEKAoIBAQC0ranbHRLcLVqN+0BzcZpY
-+yOLqxzDWT1LD9eW1stC4NzXX9/DCtSIVyN7YIHdGLrIPr64IDdXXaMRzgZ2rOKs
-lmHCAiFpO/ja99gGCJRxH0xwQatqAULfJVHeUhs7OEGOZc2nWifjqKvGfNTilP7D
-nwi69ipQFq9oS19FmhwVHk2wg7KZGHI1qDyG04UrfCZMRitvS9+UVhPpIPjuiBi2
-x3/FZIpL5gXJvvFK6xHY63oq2asyzBATntBgnP4qJFWWcvRx24wF1PnZabxuVoL2
-bPnQ/KvONDrw3IdqkKhYNTul7jEcu3OlcZIMw+7DiaKJLAzKb/bBF5gm/pwW6As9
-AgMBAAGjgY8wgYwwDAYDVR0TAQH/BAIwADAOBgNVHQ8BAf8EBAMCBeAwLAYJYIZI
-AYb4QgENBB8WHU9wZW5TU0wgR2VuZXJhdGVkIENlcnRpZmljYXRlMB0GA1UdDgQW
-BBSZHKyLoTh7Mb409Zn/mK1ceSDAjDAfBgNVHSMEGDAWgBQ2w2yI55X+sL3szj49
-hqshgYfa2jANBgkqhkiG9w0BAQUFAAOCAQEAD0mL7PtPYgCEuDyOQSbLpeND5hVS
-curxQdGnrJ6Acrhodb7E9ccATokeb0PLx6HBLQUicxhTZIQ9FbO43YkQcOU6C3BB
-IlwskqmtN6+VmrQzNolHCDzvxNZs9lYL2VbGPGqVRyjZeHpoAlf9cQr8PgDb4d4b
-vUx2KAhHQvV2nkmYvKyXcgnRuHggumF87mkxidriGAEFwH4qfOqetUg64WyxP7P2
-QLipm04SyQa7ONtIApfVXgHcE42Py4/f4arzCzMjKe3VyhGkS7nsT55X/fWgTaRm
-CQPkO+H94P958WTvQDt77bQ+D3IvYaVvfil8n6HJMOJfFT0LJuSUbpSXJg==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 -----END CERTIFICATE-----
 -----BEGIN RSA PRIVATE KEY-----
-MIIEpQIBAAKCAQEAtK2p2x0S3C1ajftAc3GaWPsji6scw1k9Sw/XltbLQuDc11/f
-wwrUiFcje2CB3Ri6yD6+uCA3V12jEc4GdqzirJZhwgIhaTv42vfYBgiUcR9McEGr
-agFC3yVR3lIbOzhBjmXNp1on46irxnzU4pT+w58IuvYqUBavaEtfRZocFR5NsIOy
-mRhyNag8htOFK3wmTEYrb0vflFYT6SD47ogYtsd/xWSKS+YFyb7xSusR2Ot6Ktmr
-MswQE57QYJz+KiRVlnL0cduMBdT52Wm8blaC9mz50PyrzjQ68NyHapCoWDU7pe4x
-HLtzpXGSDMPuw4miiSwMym/2wReYJv6cFugLPQIDAQABAoIBAAZOyc9MhIwLSU4L
-p4RgQvM4UVVe8/Id+3XTZ8NsXExJbWxXfIhiqGjaIfL8u4vsgRjcl+v1s/jo2/iT
-KMab4o4D8gXD7UavQVDjtjb/ta79WL3SjRl2Uc9YjjMkyq6WmDNQeo2NKDdafCTB
-1uzSJtLNipB8Z53ELPuHJhxX9QMHrMnuha49riQgXZ7buP9iQrHJFhImBjSzbxJx
-L+TI6rkyLSf9Wi0Pd3L27Ob3QWNfNRYNSeTE+08eSRChkur5W0RuXAcuAICdQlCl
-LBvWO/LmmvbzCqiDcgy/TliSb6CGGwgiNG7LJZmlkYNj8laGwalNlYZs3UrVv6NO
-Br2loAECgYEA2kvCvPGj0Dg/6g7WhXDvAkEbcaL1tSeCxBbNH+6HS2UWMWvyTtCn
-/bbD519QIdkvayy1QjEf32GV/UjUVmlULMLBcDy0DGjtL3+XpIhLKWDNxN1v1/ai
-1oz23ZJCOgnk6K4qtFtlRS1XtynjA+rBetvYvLP9SKeFrnpzCgaA2r0CgYEA0+KX
-1ACXDTNH5ySX3kMjSS9xdINf+OOw4CvPHFwbtc9aqk2HePlEsBTz5I/W3rKwXva3
-NqZ/bRqVVeZB/hHKFywgdUQk2Uc5z/S7Lw70/w1HubNTXGU06Ngb6zOFAo/o/TwZ
-zTP1BMIKSOB6PAZPS3l+aLO4FRIRotfFhgRHOoECgYEAmiZbqt8cJaJDB/5YYDzC
-mp3tSk6gIb936Q6M5VqkMYp9pIKsxhk0N8aDCnTU+kIK6SzWBpr3/d9Ecmqmfyq7
-5SvWO3KyVf0WWK9KH0abhOm2BKm2HBQvI0DB5u8sUx2/hsvOnjPYDISbZ11t0MtK
-u35Zy89yMYcSsIYJjG/ROCUCgYEAgI2P9G5PNxEP5OtMwOsW84Y3Xat/hPAQFlI+
-HES+AzbFGWJkeT8zL2nm95tVkFP1sggZ7Kxjz3w7cpx7GX0NkbWSE9O+T51pNASV
-tN1sQ3p5M+/a+cnlqgfEGJVvc7iAcXQPa3LEi5h2yPR49QYXAgG6cifn3dDSpmwn
-SUI7PQECgYEApGCIIpSRPLAEHTGmP87RBL1smurhwmy2s/pghkvUkWehtxg0sGHh
-kuaqDWcskogv+QC0sVdytiLSz8G0DwcEcsHK1Fkyb8A+ayiw6jWJDo2m9+IF4Fww
-1Te6jFPYDESnbhq7+TLGgHGhtwcu5cnb4vSuYXGXKupZGzoLOBbv1Zw=
+MIIBOwIBAAJBALtv55QyzG6i2PlwZ1pah7++Gv8L5j6Hnyr/uTZE1NLG0ABDDexm
+q/R4KedLjFEIYjocDui+IXs62NNtXrT8odkCAwEAAQJAbwXq0vJ/+uyEvsNgxLko
+/V86mGXQ/KrSkeKlL0r4ENxjcyeMAGoKu6J9yMY7+X9+Zm4nxShNfTsf/+Freoe1
+HQIhAPOSm5Q1YI+KIsII2GeVJx1U69+wnd71OasIPakS1L1XAiEAxQAW+J3/JWE0
+ftEYakbhUOKL8tD1OaFZS71/5GdG7E8CIQCefUMmySSvwd6kC0VlATSWbW+d+jp/
+nWmM1KvqnAo5uQIhALqEADu5U1Wvt8UN8UDGBRPQulHWNycuNV45d3nnskWPAiAw
+ueTyr6WsZ5+SD8g/Hy3xuvF3nPmJRH+rwvVihlcFOg==
 -----END RSA PRIVATE KEY-----
--- a/apps/cms.c
+++ b/apps/cms.c
@@ -74,8 +74,6 @@ static void receipt_request_print(BIO *out, CMS_ContentInfo *cms);
 static CMS_ReceiptRequest *make_receipt_request(STACK_OF(OPENSSL_STRING) *rr_to,
 						int rr_allorfirst,
 					STACK_OF(OPENSSL_STRING) *rr_from);
-static int cms_set_pkey_param(EVP_PKEY_CTX *pctx,
-			STACK_OF(OPENSSL_STRING) *param);

 #define SMIME_OP	0x10
 #define SMIME_IP	0x20
@@ -99,15 +97,6 @@ static int cms_set_pkey_param(EVP_PKEY_CTX *pctx,

 int verify_err = 0;

-typedef struct cms_key_param_st cms_key_param;
-
-struct cms_key_param_st
-	{
-	int idx;
-	STACK_OF(OPENSSL_STRING)*param;
-	cms_key_param *next;
-	};
-
 int MAIN(int, char **);

 int MAIN(int argc, char **argv)
@@ -122,7 +111,7 @@ int MAIN(int argc, char **argv)
 	STACK_OF(OPENSSL_STRING) *sksigners = NULL, *skkeys = NULL;
 	char *certfile = NULL, *keyfile = NULL, *contfile=NULL;
 	char *certsoutfile = NULL;
-	const EVP_CIPHER *cipher = NULL, *wrap_cipher = NULL;
+	const EVP_CIPHER *cipher = NULL;
 	CMS_ContentInfo *cms = NULL, *rcms = NULL;
 	X509_STORE *store = NULL;
 	X509 *cert = NULL, *recip = NULL, *signer = NULL;
@@ -147,11 +136,8 @@ int MAIN(int argc, char **argv)
 	char *engine=NULL;
 #endif
 	unsigned char *secret_key = NULL, *secret_keyid = NULL;
-	unsigned char *pwri_pass = NULL, *pwri_tmp = NULL;
 	size_t secret_keylen = 0, secret_keyidlen = 0;

-	cms_key_param *key_first = NULL, *key_param = NULL;
-
 	ASN1_OBJECT *econtent_type = NULL;

 	X509_VERIFY_PARAM *vpm = NULL;
@@ -217,8 +203,6 @@ int MAIN(int argc, char **argv)
 				cipher = EVP_des_ede3_cbc();
 		else if (!strcmp (*args, "-des")) 
 				cipher = EVP_des_cbc();
-		else if (!strcmp (*args, "-des3-wrap")) 
-				wrap_cipher = EVP_des_ede3_wrap();
 #endif
 #ifndef OPENSSL_NO_SEED
 		else if (!strcmp (*args, "-seed")) 
@@ -239,12 +223,6 @@ int MAIN(int argc, char **argv)
 				cipher = EVP_aes_192_cbc();
 		else if (!strcmp(*args,"-aes256"))
 				cipher = EVP_aes_256_cbc();
-		else if (!strcmp(*args,"-aes128-wrap"))
-				wrap_cipher = EVP_aes_128_wrap();
-		else if (!strcmp(*args,"-aes192-wrap"))
-				wrap_cipher = EVP_aes_192_wrap();
-		else if (!strcmp(*args,"-aes256-wrap"))
-				wrap_cipher = EVP_aes_256_wrap();
 #endif
 #ifndef OPENSSL_NO_CAMELLIA
 		else if (!strcmp(*args,"-camellia128"))
@@ -350,13 +328,6 @@ int MAIN(int argc, char **argv)
 				}
 			secret_keyidlen = (size_t)ltmp;
 			}
-		else if (!strcmp(*args,"-pwri_password"))
-			{
-			if (!args[1])
-				goto argerr;
-			args++;
-			pwri_pass = (unsigned char *)*args;
-			}
 		else if (!strcmp(*args,"-econtent_type"))
 			{
 			if (!args[1])
@@ -433,20 +404,7 @@ int MAIN(int argc, char **argv)
 			{
 			if (!args[1])
 				goto argerr;
-			if (operation == SMIME_ENCRYPT)
-				{
-				if (!encerts)
-					encerts = sk_X509_new_null();
-				cert = load_cert(bio_err,*++args,FORMAT_PEM,
-						NULL, e,
-						"recipient certificate file");
-				if (!cert)
-					goto end;
-				sk_X509_push(encerts, cert);
-				cert = NULL;
-				}
-			else	
-				recipfile = *++args;
+			recipfile = *++args;
 			}
 		else if (!strcmp (*args, "-certsout"))
 			{
@@ -494,43 +452,6 @@ int MAIN(int argc, char **argv)
 				goto argerr;
 			keyform = str2fmt(*++args);
 			}
-		else if (!strcmp (*args, "-keyopt"))
-			{
-			int keyidx = -1;
-			if (!args[1])
-				goto argerr;
-			if (operation == SMIME_ENCRYPT)
-				{
-				if (encerts)
-					keyidx += sk_X509_num(encerts);
-				}
-			else
-				{
-				if (keyfile || signerfile)
-					keyidx++;
-				if (skkeys)
-					keyidx += sk_OPENSSL_STRING_num(skkeys);
-				}
-			if (keyidx < 0)
-				{
-				BIO_printf(bio_err, "No key specified\n");
-				goto argerr;
-				}
-			if (key_param == NULL || key_param->idx != keyidx)
-				{
-				cms_key_param *nparam;
-				nparam = OPENSSL_malloc(sizeof(cms_key_param));
-				nparam->idx = keyidx;
-				nparam->param = sk_OPENSSL_STRING_new_null();
-				nparam->next = NULL;
-				if (key_first == NULL)
-					key_first = nparam;
-				else
-					key_param->next = nparam;
-				key_param = nparam;
-				}
-			sk_OPENSSL_STRING_push(key_param->param, *++args);
-			}
 		else if (!strcmp (*args, "-rctform"))
 			{
 			if (!args[1])
@@ -640,7 +561,7 @@ int MAIN(int argc, char **argv)

 	else if (operation == SMIME_DECRYPT)
 		{
-		if (!recipfile && !keyfile && !secret_key && !pwri_pass)
+		if (!recipfile && !keyfile && !secret_key)
 			{
 			BIO_printf(bio_err, "No recipient certificate or key specified\n");
 			badarg = 1;
@@ -648,7 +569,7 @@ int MAIN(int argc, char **argv)
 		}
 	else if (operation == SMIME_ENCRYPT)
 		{
-		if (!*args && !secret_key && !pwri_pass && !encerts)
+		if (!*args && !secret_key)
 			{
 			BIO_printf(bio_err, "No recipient(s) certificate(s) specified\n");
 			badarg = 1;
@@ -704,7 +625,6 @@ int MAIN(int argc, char **argv)
 		BIO_printf (bio_err, "-inform arg    input format SMIME (default), PEM or DER\n");
 		BIO_printf (bio_err, "-inkey file    input private key (if not signer or recipient)\n");
 		BIO_printf (bio_err, "-keyform arg   input private key format (PEM or ENGINE)\n");
-		BIO_printf (bio_err, "-keyopt nm:v   set public key parameters\n");
 		BIO_printf (bio_err, "-out file      output file\n");
 		BIO_printf (bio_err, "-outform arg   output format SMIME (default), PEM or DER\n");
 		BIO_printf (bio_err, "-content file  supply or override content for detached signature\n");
@@ -790,7 +710,7 @@ int MAIN(int argc, char **argv)
 			goto end;
 			}

-		if (*args && !encerts)
+		if (*args)
 			encerts = sk_X509_new_null();
 		while (*args)
 			{
@@ -984,45 +904,10 @@ int MAIN(int argc, char **argv)
 		}
 	else if (operation == SMIME_ENCRYPT)
 		{
-		int i;
 		flags |= CMS_PARTIAL;
-		cms = CMS_encrypt(NULL, in, cipher, flags);
+		cms = CMS_encrypt(encerts, in, cipher, flags);
 		if (!cms)
 			goto end;
-		for (i = 0; i < sk_X509_num(encerts); i++)
-			{
-			CMS_RecipientInfo *ri;
-			cms_key_param *kparam;
-			int tflags = flags;
-			X509 *x = sk_X509_value(encerts, i);
-			for(kparam = key_first; kparam; kparam = kparam->next)
-				{
-				if(kparam->idx == i)
-					{
-					tflags |= CMS_KEY_PARAM;
-					break;
-					}
-				}
-			ri = CMS_add1_recipient_cert(cms, x, tflags);
-			if (!ri)
-				goto end;
-			if (kparam)
-				{
-				EVP_PKEY_CTX *pctx;
-				pctx = CMS_RecipientInfo_get0_pkey_ctx(ri);
-				if (!cms_set_pkey_param(pctx, kparam->param))
-					goto end;
-				}
-			if (CMS_RecipientInfo_type(ri) == CMS_RECIPINFO_AGREE
-				&& wrap_cipher)
-				{
-				EVP_CIPHER_CTX *wctx;
-				wctx = CMS_RecipientInfo_kari_get0_ctx(ri);
-				EVP_EncryptInit_ex(wctx, wrap_cipher,
-							NULL, NULL, NULL);
-				}
-			}
-
 		if (secret_key)
 			{
 			if (!CMS_add0_recipient_key(cms, NID_undef, 
@@ -1034,17 +919,6 @@ int MAIN(int argc, char **argv)
 			secret_key = NULL;
 			secret_keyid = NULL;
 			}
-		if (pwri_pass)
-			{
-			pwri_tmp = (unsigned char *)BUF_strdup((char *)pwri_pass);
-			if (!pwri_tmp)
-				goto end;
-			if (!CMS_add0_recipient_password(cms,
-						-1, NID_undef, NID_undef,
-						 pwri_tmp, -1, NULL))
-				goto end;
-			pwri_tmp = NULL;
-			}
 		if (!(flags & CMS_STREAM))
 			{
 			if (!CMS_final(cms, in, NULL, flags))
@@ -1111,11 +985,8 @@ int MAIN(int argc, char **argv)
 		for (i = 0; i < sk_OPENSSL_STRING_num(sksigners); i++)
 			{
 			CMS_SignerInfo *si;
-			cms_key_param *kparam;
-			int tflags = flags;
 			signerfile = sk_OPENSSL_STRING_value(sksigners, i);
 			keyfile = sk_OPENSSL_STRING_value(skkeys, i);
-
 			signer = load_cert(bio_err, signerfile,FORMAT_PEM, NULL,
 					e, "signer certificate");
 			if (!signer)
@@ -1124,24 +995,9 @@ int MAIN(int argc, char **argv)
 			       "signing key file");
 			if (!key)
 				goto end;
-			for(kparam = key_first; kparam; kparam = kparam->next)
-				{
-				if(kparam->idx == i)
-					{
-					tflags |= CMS_KEY_PARAM;
-					break;
-					}
-				}
-			si = CMS_add1_signer(cms, signer, key, sign_md, tflags);
+			si = CMS_add1_signer(cms, signer, key, sign_md, flags);
 			if (!si)
 				goto end;
-			if (kparam)
-				{
-				EVP_PKEY_CTX *pctx;
-				pctx = CMS_SignerInfo_get0_pkey_ctx(si);
-				if (!cms_set_pkey_param(pctx, kparam->param))
-					goto end;
-				}
 			if (rr && !CMS_add1_ReceiptRequest(si, rr))
 				goto end;
 			X509_free(signer);
@@ -1191,16 +1047,6 @@ int MAIN(int argc, char **argv)
 				}
 			}

-		if (pwri_pass)
-			{
-			if (!CMS_decrypt_set1_password(cms, pwri_pass, -1))
-				{
-				BIO_puts(bio_err,
-					"Error decrypting CMS using password\n");
-				goto end;
-				}
-			}
-
 		if (!CMS_decrypt(cms, NULL, NULL, indata, out, flags))
 			{
 			BIO_printf(bio_err, "Error decrypting CMS structure\n");
@@ -1325,8 +1171,6 @@ end:
 		OPENSSL_free(secret_key);
 	if (secret_keyid)
 		OPENSSL_free(secret_keyid);
-	if (pwri_tmp)
-		OPENSSL_free(pwri_tmp);
 	if (econtent_type)
 		ASN1_OBJECT_free(econtent_type);
 	if (rr)
@@ -1335,14 +1179,6 @@ end:
 		sk_OPENSSL_STRING_free(rr_to);
 	if (rr_from)
 		sk_OPENSSL_STRING_free(rr_from);
-	for(key_param = key_first; key_param;)
-		{
-		cms_key_param *tparam;
-		sk_OPENSSL_STRING_free(key_param->param);
-		tparam = key_param->next;
-		OPENSSL_free(key_param);
-		key_param = tparam;
-		}
 	X509_STORE_free(store);
 	X509_free(cert);
 	X509_free(recip);
@@ -1527,25 +1363,4 @@ static CMS_ReceiptRequest *make_receipt_request(STACK_OF(OPENSSL_STRING) *rr_to,
 	return NULL;
 	}

-static int cms_set_pkey_param(EVP_PKEY_CTX *pctx,
-			STACK_OF(OPENSSL_STRING) *param)
-	{
-	char *keyopt;
-	int i;
-	if (sk_OPENSSL_STRING_num(param) <= 0)
-		return 1;
-	for (i = 0; i < sk_OPENSSL_STRING_num(param); i++)
-		{
-		keyopt = sk_OPENSSL_STRING_value(param, i);
-		if (pkey_ctrl_string(pctx, keyopt) <= 0)
-			{
-			BIO_printf(bio_err, "parameter error \"%s\"\n",
-						keyopt);
-			ERR_print_errors(bio_err);
-			return 0;
-			}
-		}
-	return 1;
-	}
-
 #endif
--- a/apps/crl.c
+++ b/apps/crl.c
@@ -96,6 +96,7 @@ static const char *crl_usage[]={
 NULL
 };

+static X509_CRL *load_crl(char *file, int format);
 static BIO *bio_out=NULL;

 int MAIN(int, char **);
@@ -105,10 +106,10 @@ int MAIN(int argc, char **argv)
 	unsigned long nmflag = 0;
 	X509_CRL *x=NULL;
 	char *CAfile = NULL, *CApath = NULL;
-	int ret=1,i,num,badops=0,badsig=0;
+	int ret=1,i,num,badops=0;
 	BIO *out=NULL;
-	int informat,outformat, keyformat;
-	char *infile=NULL,*outfile=NULL, *crldiff = NULL, *keyfile = NULL;
+	int informat,outformat;
+	char *infile=NULL,*outfile=NULL;
 	int hash=0,issuer=0,lastupdate=0,nextupdate=0,noout=0,text=0;
 #ifndef OPENSSL_NO_MD5
       int hash_old=0;
@@ -146,7 +147,6 @@ int MAIN(int argc, char **argv)

 	informat=FORMAT_PEM;
 	outformat=FORMAT_PEM;
-	keyformat=FORMAT_PEM;

 	argc--;
 	argv++;
@@ -175,21 +175,6 @@ int MAIN(int argc, char **argv)
 			if (--argc < 1) goto bad;
 			infile= *(++argv);
 			}
-		else if (strcmp(*argv,"-gendelta") == 0)
-			{
-			if (--argc < 1) goto bad;
-			crldiff= *(++argv);
-			}
-		else if (strcmp(*argv,"-key") == 0)
-			{
-			if (--argc < 1) goto bad;
-			keyfile= *(++argv);
-			}
-		else if (strcmp(*argv,"-keyform") == 0)
-			{
-			if (--argc < 1) goto bad;
-			keyformat=str2fmt(*(++argv));
-			}
 		else if (strcmp(*argv,"-out") == 0)
 			{
 			if (--argc < 1) goto bad;
@@ -234,8 +219,6 @@ int MAIN(int argc, char **argv)
 			fingerprint= ++num;
 		else if (strcmp(*argv,"-crlnumber") == 0)
 			crlnumber= ++num;
-		else if (strcmp(*argv,"-badsig") == 0)
-			badsig = 1;
 		else if ((md_alg=EVP_get_digestbyname(*argv + 1)))
 			{
 			/* ok */
@@ -303,39 +286,6 @@ bad:
 		else BIO_printf(bio_err, "verify OK\n");
 	}

-	if (crldiff)
-		{
-		X509_CRL *newcrl, *delta;
-		if (!keyfile)
-			{
-			BIO_puts(bio_err, "Missing CRL signing key\n");
-			goto end;
-			}
-		newcrl = load_crl(crldiff,informat);
-		if (!newcrl)
-			goto end;
-		pkey = load_key(bio_err, keyfile, keyformat, 0, NULL, NULL,
-					"CRL signing key");
-		if (!pkey)
-			{
-			X509_CRL_free(newcrl);
-			goto end;
-			}	
-		delta = X509_CRL_diff(x, newcrl, pkey, digest, 0);
-		X509_CRL_free(newcrl);
-		EVP_PKEY_free(pkey);
-		if (delta)
-			{
-			X509_CRL_free(x);
-			x = delta;
-			}
-		else
-			{
-			BIO_puts(bio_err, "Error creating delta CRL\n");
-			goto end;
-			}
-		}
-
 	if (num)
 		{
 		for (i=1; i<=num; i++)
@@ -446,9 +396,6 @@ bad:
 		goto end;
 		}

-	if (badsig)
-		x->signature->data[x->signature->length - 1] ^= 0x1;
-
 	if 	(outformat == FORMAT_ASN1)
 		i=(int)i2d_X509_CRL_bio(out,x);
 	else if (outformat == FORMAT_PEM)
@@ -461,8 +408,6 @@ bad:
 	if (!i) { BIO_printf(bio_err,"unable to write CRL\n"); goto end; }
 	ret=0;
 end:
-	if (ret != 0)
-		ERR_print_errors(bio_err);
 	BIO_free_all(out);
 	BIO_free_all(bio_out);
 	bio_out=NULL;
@@ -474,3 +419,46 @@ end:
 	apps_shutdown();
 	OPENSSL_EXIT(ret);
 	}
+
+static X509_CRL *load_crl(char *infile, int format)
+	{
+	X509_CRL *x=NULL;
+	BIO *in=NULL;
+
+	in=BIO_new(BIO_s_file());
+	if (in == NULL)
+		{
+		ERR_print_errors(bio_err);
+		goto end;
+		}
+
+	if (infile == NULL)
+		BIO_set_fp(in,stdin,BIO_NOCLOSE);
+	else
+		{
+		if (BIO_read_filename(in,infile) <= 0)
+			{
+			perror(infile);
+			goto end;
+			}
+		}
+	if 	(format == FORMAT_ASN1)
+		x=d2i_X509_CRL_bio(in,NULL);
+	else if (format == FORMAT_PEM)
+		x=PEM_read_bio_X509_CRL(in,NULL,NULL,NULL);
+	else	{
+		BIO_printf(bio_err,"bad input format specified for input crl\n");
+		goto end;
+		}
+	if (x == NULL)
+		{
+		BIO_printf(bio_err,"unable to load CRL\n");
+		ERR_print_errors(bio_err);
+		goto end;
+		}
+	
+end:
+	BIO_free(in);
+	return(x);
+	}
+
--- a/apps/demoSRP/srp_verifier.txt
+++ b/apps/demoSRP/srp_verifier.txt
@@ -1,6 +0,0 @@
-# This is a file that will be filled by the openssl srp routine.
-# You can initialize the file with additional groups, these are
-# records starting with a I followed by the g and N values and the id.
-# The exact values ... you have to dig this out from the source of srp.c
-# or srp_vfy.c
-# The last value of an I is used as the default group for new users.  
--- a/apps/demoSRP/srp_verifier.txt.attr
+++ b/apps/demoSRP/srp_verifier.txt.attr
@@ -1 +0,0 @@
-unique_subject = yes
--- a/apps/dgst.c
+++ b/apps/dgst.c
@@ -103,7 +103,7 @@ int MAIN(int, char **);

 int MAIN(int argc, char **argv)
 	{
-	ENGINE *e = NULL, *impl = NULL;
+	ENGINE *e = NULL;
 	unsigned char *buf=NULL;
 	int i,err=1;
 	const EVP_MD *md=NULL,*m;
@@ -124,11 +124,9 @@ int MAIN(int argc, char **argv)
 	char *passargin = NULL, *passin = NULL;
 #ifndef OPENSSL_NO_ENGINE
 	char *engine=NULL;
-	int engine_impl = 0;
 #endif
 	char *hmac_key=NULL;
 	char *mac_name=NULL;
-	int non_fips_allow = 0;
 	STACK_OF(OPENSSL_STRING) *sigopts = NULL, *macopts = NULL;

 	apps_startup();
@@ -210,8 +208,6 @@ int MAIN(int argc, char **argv)
 			engine= *(++argv);
        		e = setup_engine(bio_err, engine, 0);
 			}
-		else if (strcmp(*argv,"-engine_impl") == 0)
-			engine_impl = 1;
 #endif
 		else if (strcmp(*argv,"-hex") == 0)
 			out_bin = 0;
@@ -219,10 +215,6 @@ int MAIN(int argc, char **argv)
 			out_bin = 1;
 		else if (strcmp(*argv,"-d") == 0)
 			debug=1;
-		else if (!strcmp(*argv,"-fips-fingerprint"))
-			hmac_key = "etaonrishdlcupfm";
-		else if (strcmp(*argv,"-non-fips-allow") == 0)
-			non_fips_allow=1;
 		else if (!strcmp(*argv,"-hmac"))
 			{
 			if (--argc < 1)
@@ -294,11 +286,6 @@ int MAIN(int argc, char **argv)
 		goto end;
 		}

-#ifndef OPENSSL_NO_ENGINE
-	if (engine_impl)
-		impl = e;
-#endif
-
 	in=BIO_new(BIO_s_file());
 	bmd=BIO_new(BIO_f_md());
 	if (debug)
@@ -376,7 +363,7 @@ int MAIN(int argc, char **argv)
 		{
 		EVP_PKEY_CTX *mac_ctx = NULL;
 		int r = 0;
-		if (!init_gen_str(bio_err, &mac_ctx, mac_name, impl, 0))
+		if (!init_gen_str(bio_err, &mac_ctx, mac_name,e, 0))
 			goto mac_end;
 		if (macopts)
 			{
@@ -408,16 +395,9 @@ int MAIN(int argc, char **argv)
 			goto end;
 		}

-	if (non_fips_allow)
-		{
-		EVP_MD_CTX *md_ctx;
-		BIO_get_md_ctx(bmd,&md_ctx);
-		EVP_MD_CTX_set_flags(md_ctx, EVP_MD_CTX_FLAG_NON_FIPS_ALLOW);
-		}
-
 	if (hmac_key)
 		{
-		sigkey = EVP_PKEY_new_mac_key(EVP_PKEY_HMAC, impl,
+		sigkey = EVP_PKEY_new_mac_key(EVP_PKEY_HMAC, e,
 					(unsigned char *)hmac_key, -1);
 		if (!sigkey)
 			goto end;
@@ -435,9 +415,9 @@ int MAIN(int argc, char **argv)
 			goto end;
 			}
 		if (do_verify)
-			r = EVP_DigestVerifyInit(mctx, &pctx, md, impl, sigkey);
+			r = EVP_DigestVerifyInit(mctx, &pctx, md, NULL, sigkey);
 		else
-			r = EVP_DigestSignInit(mctx, &pctx, md, impl, sigkey);
+			r = EVP_DigestSignInit(mctx, &pctx, md, NULL, sigkey);
 		if (!r)
 			{
 			BIO_printf(bio_err, "Error setting context\n");
@@ -464,16 +444,9 @@ int MAIN(int argc, char **argv)
 	/* we use md as a filter, reading from 'in' */
 	else
 		{
-		EVP_MD_CTX *mctx = NULL;
-		if (!BIO_get_md_ctx(bmd, &mctx))
-			{
-			BIO_printf(bio_err, "Error getting context\n");
-			ERR_print_errors(bio_err);
-			goto end;
-			}
 		if (md == NULL)
 			md = EVP_md5(); 
-		if (!EVP_DigestInit_ex(mctx, md, impl))
+		if (!BIO_set_md(bmd,md))
 			{
 			BIO_printf(bio_err, "Error setting digest %s\n", pname);
 			ERR_print_errors(bio_err);
@@ -529,8 +502,7 @@ int MAIN(int argc, char **argv)
 					EVP_PKEY_asn1_get0_info(NULL, NULL,
 						NULL, NULL, &sig_name, ameth);
 				}
-			if (md)
-				md_name = EVP_MD_name(md);
+			md_name = EVP_MD_name(md);
 			}
 		err = 0;
 		for (i=0; i<argc; i++)
@@ -642,12 +614,7 @@ int do_fp(BIO *out, unsigned char *buf, BIO *bp, int sep, int binout,
 	else 
 		{
 		if (sig_name)
-			{
-			BIO_puts(out, sig_name);
-			if (md_name)
-				BIO_printf(out, "-%s", md_name);
-			BIO_printf(out, "(%s)= ", file);
-			}
+			BIO_printf(out, "%s-%s(%s)= ", sig_name, md_name, file);
 		else if (md_name)
 			BIO_printf(out, "%s(%s)= ", md_name, file);
 		else
--- a/apps/dhparam.c
+++ b/apps/dhparam.c
@@ -130,7 +130,7 @@
 #undef PROG
 #define PROG	dhparam_main

-#define DEFBITS	2048
+#define DEFBITS	512

 /* -inform arg	- input format - default PEM (DER or PEM)
 * -outform arg - output format - default PEM
@@ -253,7 +253,7 @@ bad:
 		BIO_printf(bio_err," -C            Output C code\n");
 		BIO_printf(bio_err," -2            generate parameters using  2 as the generator value\n");
 		BIO_printf(bio_err," -5            generate parameters using  5 as the generator value\n");
-		BIO_printf(bio_err," numbits       number of bits in to generate (default 2048)\n");
+		BIO_printf(bio_err," numbits       number of bits in to generate (default 512)\n");
 #ifndef OPENSSL_NO_ENGINE
 		BIO_printf(bio_err," -engine e     use engine e, possibly a hardware device.\n");
 #endif
@@ -512,12 +512,7 @@ bad:
 		if 	(outformat == FORMAT_ASN1)
 			i=i2d_DHparams_bio(out,dh);
 		else if (outformat == FORMAT_PEM)
-			{
-			if (dh->q)
-				i=PEM_write_bio_DHxparams(out,dh);
-			else
-				i=PEM_write_bio_DHparams(out,dh);
-			}
+			i=PEM_write_bio_DHparams(out,dh);
 		else	{
 			BIO_printf(bio_err,"bad output format specified for outfile\n");
 			goto end;
--- a/apps/dsaparam.c
+++ b/apps/dsaparam.c
@@ -326,7 +326,6 @@ bad:
 				goto end;
 				}
 #endif
-			ERR_print_errors(bio_err);
 			BIO_printf(bio_err,"Error, DSA key generation failed\n");
 			goto end;
 			}
@@ -430,19 +429,13 @@ bad:

 		assert(need_rand);
 		if ((dsakey=DSAparams_dup(dsa)) == NULL) goto end;
-		if (!DSA_generate_key(dsakey))
-			{
-			ERR_print_errors(bio_err);
-			DSA_free(dsakey);
-			goto end;
-			}
+		if (!DSA_generate_key(dsakey)) goto end;
 		if 	(outformat == FORMAT_ASN1)
 			i=i2d_DSAPrivateKey_bio(out,dsakey);
 		else if (outformat == FORMAT_PEM)
 			i=PEM_write_bio_DSAPrivateKey(out,dsakey,NULL,NULL,0,NULL,NULL);
 		else	{
 			BIO_printf(bio_err,"bad output format specified for outfile\n");
-			DSA_free(dsakey);
 			goto end;
 			}
 		DSA_free(dsakey);
--- a/apps/ecparam.c
+++ b/apps/ecparam.c
@@ -402,9 +402,6 @@ bad:
 			}
 		else
 			nid = OBJ_sn2nid(curve_name);
-
-		if (nid == 0)
-			nid = EC_curve_nist2nid(curve_name);
 	
 		if (nid == 0)
 			{
--- a/apps/enc.c
+++ b/apps/enc.c
@@ -131,7 +131,6 @@ int MAIN(int argc, char **argv)
 	char *engine = NULL;
 #endif
 	const EVP_MD *dgst=NULL;
-	int non_fips_allow = 0;

 	apps_startup();

@@ -284,8 +283,6 @@ int MAIN(int argc, char **argv)
 			if (--argc < 1) goto bad;
 			md= *(++argv);
 			}
-		else if (strcmp(*argv,"-non-fips-allow") == 0)
-			non_fips_allow = 1;
 		else if	((argv[0][0] == '-') &&
 			((c=EVP_get_cipherbyname(&(argv[0][1]))) != NULL))
 			{
@@ -333,18 +330,6 @@ bad:
        setup_engine(bio_err, engine, 0);
 #endif

-	if (cipher && EVP_CIPHER_flags(cipher) & EVP_CIPH_FLAG_AEAD_CIPHER)
-		{
-		BIO_printf(bio_err, "AEAD ciphers not supported by the enc utility\n");
-		goto end;
-		}
-
-	if (cipher && (EVP_CIPHER_mode(cipher) == EVP_CIPH_XTS_MODE))
-		{
-		BIO_printf(bio_err, "Ciphers in XTS mode are not supported by the enc utility\n");
-		goto end;
-		}
-
 	if (md && (dgst=EVP_get_digestbyname(md)) == NULL)
 		{
 		BIO_printf(bio_err,"%s is an unsupported message digest type\n",md);
@@ -606,11 +591,6 @@ bad:
 		 */

 		BIO_get_cipher_ctx(benc, &ctx);
-
-		if (non_fips_allow)
-			EVP_CIPHER_CTX_set_flags(ctx,
-				EVP_CIPH_FLAG_NON_FIPS_ALLOW);
-
 		if (!EVP_CipherInit_ex(ctx, cipher, NULL, NULL, NULL, enc))
 			{
 			BIO_printf(bio_err, "Error setting cipher %s\n",
--- a/apps/gendh.c
+++ b/apps/gendh.c
@@ -78,7 +78,7 @@
 #include <openssl/x509.h>
 #include <openssl/pem.h>

-#define DEFBITS	2048
+#define DEFBITS	512
 #undef PROG
 #define PROG gendh_main

--- a/apps/genrsa.c
+++ b/apps/genrsa.c
@@ -78,7 +78,7 @@
 #include <openssl/pem.h>
 #include <openssl/rand.h>

-#define DEFBITS	2048
+#define DEFBITS	512
 #undef PROG
 #define PROG genrsa_main

--- a/apps/makeapps.com
+++ b/apps/makeapps.com
@@ -184,7 +184,7 @@ $ LIB_OPENSSL = "VERIFY,ASN1PARS,REQ,DGST,DH,DHPARAM,ENC,PASSWD,GENDH,ERRSTR,"+-
 	      	"X509,GENRSA,GENDSA,GENPKEY,S_SERVER,S_CLIENT,SPEED,"+-
 	      	"S_TIME,APPS,S_CB,S_SOCKET,APP_RAND,VERSION,SESS_ID,"+-
 	      	"CIPHERS,NSEQ,PKCS12,PKCS8,PKEY,PKEYPARAM,PKEYUTL,"+ -
-	      	"SPKAC,SMIME,CMS,RAND,ENGINE,OCSP,PRIME,TS,SRP"
+	      	"SPKAC,SMIME,CMS,RAND,ENGINE,OCSP,PRIME,TS"
 $!
 $ LIB_OPENSSL = LIB_OPENSSL+ ",VMS_DECC_INIT"
 $!
@@ -776,7 +776,7 @@ $ IF F$TYPE(USER_CCFLAGS) .NES. "" THEN CCEXTRAFLAGS = USER_CCFLAGS
 $ CCDISABLEWARNINGS = "" !!! "MAYLOSEDATA3" !!! "LONGLONGTYPE,LONGLONGSUFX,FOUNDCR"
 $ IF F$TYPE(USER_CCDISABLEWARNINGS) .NES. ""
 $ THEN
-$     IF CCDISABLEWARNINGS .NES. THEN CCDISABLEWARNINGS = CCDISABLEWARNINGS + ","
+$     IF CCDISABLEWARNINGS .NES. "" THEN CCDISABLEWARNINGS = CCDISABLEWARNINGS + ","
 $     CCDISABLEWARNINGS = CCDISABLEWARNINGS + USER_CCDISABLEWARNINGS
 $ ENDIF
 $!
--- a/apps/ocsp.c
+++ b/apps/ocsp.c
@@ -105,17 +105,17 @@ static int print_ocsp_summary(BIO *out, OCSP_BASICRESP *bs, OCSP_REQUEST *req,
 			      long maxage);

 static int make_ocsp_response(OCSP_RESPONSE **resp, OCSP_REQUEST *req, CA_DB *db,
-			X509 *ca, X509 *rcert, EVP_PKEY *rkey, const EVP_MD *md,
+			X509 *ca, X509 *rcert, EVP_PKEY *rkey,
 			STACK_OF(X509) *rother, unsigned long flags,
-			int nmin, int ndays, int badsig);
+			int nmin, int ndays);

 static char **lookup_serial(CA_DB *db, ASN1_INTEGER *ser);
-static BIO *init_responder(const char *port);
-static int do_responder(OCSP_REQUEST **preq, BIO **pcbio, BIO *acbio, const char *port);
+static BIO *init_responder(char *port);
+static int do_responder(OCSP_REQUEST **preq, BIO **pcbio, BIO *acbio, char *port);
 static int send_ocsp_response(BIO *cbio, OCSP_RESPONSE *resp);
-static OCSP_RESPONSE *query_responder(BIO *err, BIO *cbio, const char *path,
-				      const STACK_OF(CONF_VALUE) *headers,
-				      OCSP_REQUEST *req, int req_timeout);
+static OCSP_RESPONSE *query_responder(BIO *err, BIO *cbio, char *path,
+				STACK_OF(CONF_VALUE) *headers,
+				OCSP_REQUEST *req, int req_timeout);

 #undef PROG
 #define PROG ocsp_main
@@ -149,14 +149,12 @@ int MAIN(int argc, char **argv)
 	long nsec = MAX_VALIDITY_PERIOD, maxage = -1;
 	char *CAfile = NULL, *CApath = NULL;
 	X509_STORE *store = NULL;
-	X509_VERIFY_PARAM *vpm = NULL;
 	STACK_OF(X509) *sign_other = NULL, *verify_other = NULL, *rother = NULL;
 	char *sign_certfile = NULL, *verify_certfile = NULL, *rcertfile = NULL;
 	unsigned long sign_flags = 0, verify_flags = 0, rflags = 0;
 	int ret = 1;
 	int accept_count = -1;
 	int badarg = 0;
-	int badsig = 0;
 	int i;
 	int ignore_err = 0;
 	STACK_OF(OPENSSL_STRING) *reqnames = NULL;
@@ -167,7 +165,7 @@ int MAIN(int argc, char **argv)
 	char *rca_filename = NULL;
 	CA_DB *rdb = NULL;
 	int nmin = 0, ndays = -1;
-	const EVP_MD *cert_id_md = NULL, *rsign_md = NULL;
+	const EVP_MD *cert_id_md = NULL;

 	if (bio_err == NULL) bio_err = BIO_new_fp(stderr, BIO_NOCLOSE);

@@ -283,8 +281,6 @@ int MAIN(int argc, char **argv)
 			verify_flags |= OCSP_TRUSTOTHER;
 		else if (!strcmp(*args, "-no_intern"))
 			verify_flags |= OCSP_NOINTERN;
-		else if (!strcmp(*args, "-badsig"))
-			badsig = 1;
 		else if (!strcmp(*args, "-text"))
 			{
 			req_text = 1;
@@ -367,12 +363,6 @@ int MAIN(int argc, char **argv)
 				}
 			else badarg = 1;
 			}
-		else if (args_verify(&args, NULL, &badarg, bio_err, &vpm))
-			{
-			if (badarg)
-				goto end;
-			continue;
-			}
 		else if (!strcmp (*args, "-validity_period"))
 			{
 			if (args[1])
@@ -578,17 +568,6 @@ int MAIN(int argc, char **argv)
 				}
 			else badarg = 1;
 			}
-		else if (!strcmp(*args, "-rmd"))
-			{
-			if (args[1])
-				{
-				args++;
-				rsign_md = EVP_get_digestbyname(*args);
-				if (!rsign_md)
-					badarg = 1;
-				}
-			else badarg = 1;
-			}
 		else if ((cert_id_md = EVP_get_digestbyname((*args)+1))==NULL)
 			{
 			badarg = 1;
@@ -665,10 +644,7 @@ int MAIN(int argc, char **argv)

 	if (!req && reqin)
 		{
-		if (!strcmp(reqin, "-"))
-			derbio = BIO_new_fp(stdin, BIO_NOCLOSE);
-		else
-			derbio = BIO_new_file(reqin, "rb");
+		derbio = BIO_new_file(reqin, "rb");
 		if (!derbio)
 			{
 			BIO_printf(bio_err, "Error Opening OCSP request file\n");
@@ -770,10 +746,7 @@ int MAIN(int argc, char **argv)

 	if (reqout)
 		{
-		if (!strcmp(reqout, "-"))
-			derbio = BIO_new_fp(stdout, BIO_NOCLOSE);
-		else
-			derbio = BIO_new_file(reqout, "wb");
+		derbio = BIO_new_file(reqout, "wb");
 		if(!derbio)
 			{
 			BIO_printf(bio_err, "Error opening file %s\n", reqout);
@@ -798,7 +771,7 @@ int MAIN(int argc, char **argv)

 	if (rdb)
 		{
-		i = make_ocsp_response(&resp, req, rdb, rca_cert, rsigner, rkey,rsign_md, rother, rflags, nmin, ndays, badsig);
+		i = make_ocsp_response(&resp, req, rdb, rca_cert, rsigner, rkey, rother, rflags, nmin, ndays);
 		if (cbio)
 			send_ocsp_response(cbio, resp);
 		}
@@ -816,10 +789,7 @@ int MAIN(int argc, char **argv)
 		}
 	else if (respin)
 		{
-		if (!strcmp(respin, "-"))
-			derbio = BIO_new_fp(stdin, BIO_NOCLOSE);
-		else
-			derbio = BIO_new_file(respin, "rb");
+		derbio = BIO_new_file(respin, "rb");
 		if (!derbio)
 			{
 			BIO_printf(bio_err, "Error Opening OCSP response file\n");
@@ -844,10 +814,7 @@ int MAIN(int argc, char **argv)

 	if (respout)
 		{
-		if (!strcmp(respout, "-"))
-			derbio = BIO_new_fp(stdout, BIO_NOCLOSE);
-		else
-			derbio = BIO_new_file(respout, "wb");
+		derbio = BIO_new_file(respout, "wb");
 		if(!derbio)
 			{
 			BIO_printf(bio_err, "Error opening file %s\n", respout);
@@ -887,12 +854,6 @@ int MAIN(int argc, char **argv)
 			resp = NULL;
 			goto redo_accept;
 			}
-		ret = 0;
-		goto end;
-		}
-	else if (ridx_filename)
-		{
-		ret = 0;
 		goto end;
 		}

@@ -900,8 +861,6 @@ int MAIN(int argc, char **argv)
 		store = setup_verify(bio_err, CAfile, CApath);
 	if (!store)
 		goto end;
-	if (vpm)
-		X509_STORE_set1_param(store, vpm);
 	if (verify_certfile)
 		{
 		verify_other = load_certs(bio_err, verify_certfile, FORMAT_PEM,
@@ -917,8 +876,6 @@ int MAIN(int argc, char **argv)
 		goto end;
 		}

-	ret = 0;
-
 	if (!noverify)
 		{
 		if (req && ((i = OCSP_check_nonce(req, bs)) <= 0))
@@ -928,17 +885,17 @@ int MAIN(int argc, char **argv)
 			else
 				{
 				BIO_printf(bio_err, "Nonce Verify error\n");
-				ret = 1;
 				goto end;
 				}
 			}

 		i = OCSP_basic_verify(bs, verify_other, store, verify_flags);
+                if (i < 0) i = OCSP_basic_verify(bs, NULL, store, 0);
+
 		if(i <= 0)
 			{
 			BIO_printf(bio_err, "Response Verify Failure\n");
 			ERR_print_errors(bio_err);
-			ret = 1;
 			}
 		else
 			BIO_printf(bio_err, "Response verify OK\n");
@@ -946,14 +903,14 @@ int MAIN(int argc, char **argv)
 		}

 	if (!print_ocsp_summary(out, bs, req, reqnames, ids, nsec, maxage))
-		ret = 1;
+		goto end;
+
+	ret = 0;

 end:
 	ERR_print_errors(bio_err);
 	X509_free(signer);
 	X509_STORE_free(store);
-	if (vpm)
-		X509_VERIFY_PARAM_free(vpm);
 	EVP_PKEY_free(key);
 	EVP_PKEY_free(rkey);
 	X509_free(issuer);
@@ -1104,10 +1061,9 @@ static int print_ocsp_summary(BIO *out, OCSP_BASICRESP *bs, OCSP_REQUEST *req,


 static int make_ocsp_response(OCSP_RESPONSE **resp, OCSP_REQUEST *req, CA_DB *db,
-			X509 *ca, X509 *rcert,
-			EVP_PKEY *rkey, const EVP_MD *rmd,
+			X509 *ca, X509 *rcert, EVP_PKEY *rkey,
 			STACK_OF(X509) *rother, unsigned long flags,
-			int nmin, int ndays, int badsig)
+			int nmin, int ndays)
 	{
 	ASN1_TIME *thisupd = NULL, *nextupd = NULL;
 	OCSP_CERTID *cid, *ca_id = NULL;
@@ -1196,10 +1152,7 @@ static int make_ocsp_response(OCSP_RESPONSE **resp, OCSP_REQUEST *req, CA_DB *db

 	OCSP_copy_nonce(bs, req);
 	
-	OCSP_basic_sign(bs, rcert, rkey, rmd, rother, flags);
-
-	if (badsig)
-		bs->signature->data[bs->signature->length -1] ^= 0x1;
+	OCSP_basic_sign(bs, rcert, rkey, NULL, rother, flags);

 	*resp = OCSP_response_create(OCSP_RESPONSE_STATUS_SUCCESSFUL, bs);

@@ -1233,7 +1186,7 @@ static char **lookup_serial(CA_DB *db, ASN1_INTEGER *ser)

 /* Quick and dirty OCSP server: read in and parse input request */

-static BIO *init_responder(const char *port)
+static BIO *init_responder(char *port)
 	{
 	BIO *acbio = NULL, *bufbio = NULL;
 	bufbio = BIO_new(BIO_f_buffer());
@@ -1264,8 +1217,7 @@ static BIO *init_responder(const char *port)
 	return NULL;
 	}

-static int do_responder(OCSP_REQUEST **preq, BIO **pcbio, BIO *acbio,
-			const char *port)
+static int do_responder(OCSP_REQUEST **preq, BIO **pcbio, BIO *acbio, char *port)
 	{
 	int have_post = 0, len;
 	OCSP_REQUEST *req = NULL;
@@ -1331,9 +1283,9 @@ static int send_ocsp_response(BIO *cbio, OCSP_RESPONSE *resp)
 	return 1;
 	}

-static OCSP_RESPONSE *query_responder(BIO *err, BIO *cbio, const char *path,
-				      const STACK_OF(CONF_VALUE) *headers,
-				      OCSP_REQUEST *req, int req_timeout)
+static OCSP_RESPONSE *query_responder(BIO *err, BIO *cbio, char *path,
+				STACK_OF(CONF_VALUE) *headers,
+				OCSP_REQUEST *req, int req_timeout)
 	{
 	int fd;
 	int rv;
@@ -1429,10 +1381,9 @@ static OCSP_RESPONSE *query_responder(BIO *err, BIO *cbio, const char *path,
 	}

 OCSP_RESPONSE *process_responder(BIO *err, OCSP_REQUEST *req,
-				 const char *host, const char *path,
-				 const char *port, int use_ssl,
-				 const STACK_OF(CONF_VALUE) *headers,
-				 int req_timeout)
+			char *host, char *path, char *port, int use_ssl,
+			STACK_OF(CONF_VALUE) *headers,
+			int req_timeout)
 	{
 	BIO *cbio = NULL;
 	SSL_CTX *ctx = NULL;
--- a/apps/openssl-vms.cnf
+++ b/apps/openssl-vms.cnf
@@ -103,7 +103,7 @@ emailAddress		= optional

 ####################################################################
 [ req ]
-default_bits		= 2048
+default_bits		= 1024
 default_keyfile 	= privkey.pem
 distinguished_name	= req_distinguished_name
 attributes		= req_attributes
--- a/apps/openssl.c
+++ b/apps/openssl.c
@@ -117,7 +117,6 @@
 #include "apps.h"
 #include <openssl/bio.h>
 #include <openssl/crypto.h>
-#include <openssl/rand.h>
 #include <openssl/lhash.h>
 #include <openssl/conf.h>
 #include <openssl/x509.h>
@@ -130,9 +129,6 @@
 #include "progs.h"
 #include "s_apps.h"
 #include <openssl/err.h>
-#ifdef OPENSSL_FIPS
-#include <openssl/fips.h>
-#endif

 /* The LHASH callbacks ("hash" & "cmp") have been replaced by functions with the
 * base prototypes (we cast each variable inside the function to the required
@@ -314,19 +310,6 @@ int main(int Argc, char *ARGV[])
 		CRYPTO_set_locking_callback(lock_dbg_cb);
 		}

-	if(getenv("OPENSSL_FIPS")) {
-#ifdef OPENSSL_FIPS
-		if (!FIPS_mode_set(1)) {
-			ERR_load_crypto_strings();
-			ERR_print_errors(BIO_new_fp(stderr,BIO_NOCLOSE));
-			EXIT(1);
-		}
-#else
-		fprintf(stderr, "FIPS mode not supported.\n");
-		EXIT(1);
-#endif
-		}
-
 	apps_startup();

 	/* Lets load up our environment a little */
--- a/apps/openssl.cnf
+++ b/apps/openssl.cnf
@@ -103,7 +103,7 @@ emailAddress		= optional

 ####################################################################
 [ req ]
-default_bits		= 2048
+default_bits		= 1024
 default_keyfile 	= privkey.pem
 distinguished_name	= req_distinguished_name
 attributes		= req_attributes
--- a/apps/pkcs12.c
+++ b/apps/pkcs12.c
@@ -112,7 +112,7 @@ int MAIN(int argc, char **argv)
    int maciter = PKCS12_DEFAULT_ITER;
    int twopass = 0;
    int keytype = 0;
-    int cert_pbe;
+    int cert_pbe = NID_pbe_WithSHA1And40BitRC2_CBC;
    int key_pbe = NID_pbe_WithSHA1And3_Key_TripleDES_CBC;
    int ret = 1;
    int macver = 1;
@@ -130,13 +130,6 @@ int MAIN(int argc, char **argv)

    apps_startup();

-#ifdef OPENSSL_FIPS
-    if (FIPS_mode())
-	cert_pbe = NID_pbe_WithSHA1And3_Key_TripleDES_CBC;
-    else
-#endif
-    cert_pbe = NID_pbe_WithSHA1And40BitRC2_CBC;
-
    enc = EVP_des_ede3_cbc();
    if (bio_err == NULL ) bio_err = BIO_new_fp (stderr, BIO_NOCLOSE);

--- a/apps/pkcs8.c
+++ b/apps/pkcs8.c
@@ -135,22 +135,6 @@ int MAIN(int argc, char **argv)
 			else
 				badarg = 1;
 			}
-		else if (!strcmp(*args,"-v2prf"))
-			{
-			if (args[1])
-				{
-				args++;
-				pbe_nid=OBJ_txt2nid(*args);
-				if (!EVP_PBE_find(EVP_PBE_TYPE_PRF, pbe_nid, NULL, NULL, 0))
-					{
-					BIO_printf(bio_err,
-						 "Unknown PRF algorithm %s\n", *args);
-					badarg = 1;
-					}
-				}
-			else
-				badarg = 1;
-			}
 		else if (!strcmp(*args,"-inform"))
 			{
 			if (args[1])
--- a/apps/progs.h
+++ b/apps/progs.h
@@ -46,7 +46,6 @@ extern int engine_main(int argc,char *argv[]);
 extern int ocsp_main(int argc,char *argv[]);
 extern int prime_main(int argc,char *argv[]);
 extern int ts_main(int argc,char *argv[]);
-extern int srp_main(int argc,char *argv[]);

 #define FUNC_TYPE_GENERAL	1
 #define FUNC_TYPE_MD		2
@@ -148,9 +147,6 @@ FUNCTION functions[] = {
 #endif
 	{FUNC_TYPE_GENERAL,"prime",prime_main},
 	{FUNC_TYPE_GENERAL,"ts",ts_main},
-#ifndef OPENSSL_NO_SRP
-	{FUNC_TYPE_GENERAL,"srp",srp_main},
-#endif
 #ifndef OPENSSL_NO_MD2
 	{FUNC_TYPE_MD,"md2",dgst_main},
 #endif
--- a/apps/progs.pl
+++ b/apps/progs.pl
@@ -51,8 +51,6 @@ foreach (@ARGV)
 		{ print "#ifndef OPENSSL_NO_CMS\n${str}#endif\n"; }
 	elsif ( ($_ =~ /^ocsp$/))
 		{ print "#ifndef OPENSSL_NO_OCSP\n${str}#endif\n"; }
-	elsif ( ($_ =~ /^srp$/))
-		{ print "#ifndef OPENSSL_NO_SRP\n${str}#endif\n"; }
 	else
 		{ print $str; }
 	}
--- a/apps/req.c
+++ b/apps/req.c
@@ -165,7 +165,7 @@ int MAIN(int argc, char **argv)
 	EVP_PKEY_CTX *genctx = NULL;
 	const char *keyalg = NULL;
 	char *keyalgstr = NULL;
-	STACK_OF(OPENSSL_STRING) *pkeyopts = NULL, *sigopts = NULL;
+	STACK_OF(OPENSSL_STRING) *pkeyopts = NULL;
 	EVP_PKEY *pkey=NULL;
 	int i=0,badops=0,newreq=0,verbose=0,pkey_type=-1;
 	long newkey = -1;
@@ -310,15 +310,6 @@ int MAIN(int argc, char **argv)
 			if (!pkeyopts || !sk_OPENSSL_STRING_push(pkeyopts, *(++argv)))
 				goto bad;
 			}
-		else if (strcmp(*argv,"-sigopt") == 0)
-			{
-			if (--argc < 1)
-				goto bad;
-			if (!sigopts)
-				sigopts = sk_OPENSSL_STRING_new_null();
-			if (!sigopts || !sk_OPENSSL_STRING_push(sigopts, *(++argv)))
-				goto bad;
-			}
 		else if (strcmp(*argv,"-batch") == 0)
 			batch=1;
 		else if (strcmp(*argv,"-newhdr") == 0)
@@ -866,9 +857,8 @@ loop:
 					extensions);
 				goto end;
 				}
-
-			i=do_X509_sign(bio_err, x509ss, pkey, digest, sigopts);
-			if (!i)
+			
+			if (!(i=X509_sign(x509ss,pkey,digest)))
 				{
 				ERR_print_errors(bio_err);
 				goto end;
@@ -892,8 +882,7 @@ loop:
 					req_exts);
 				goto end;
 				}
-			i=do_X509_REQ_sign(bio_err, req, pkey, digest, sigopts);
-			if (!i)
+			if (!(i=X509_REQ_sign(req,pkey,digest)))
 				{
 				ERR_print_errors(bio_err);
 				goto end;
@@ -1094,8 +1083,6 @@ end:
 		EVP_PKEY_CTX_free(genctx);
 	if (pkeyopts)
 		sk_OPENSSL_STRING_free(pkeyopts);
-	if (sigopts)
-		sk_OPENSSL_STRING_free(sigopts);
 #ifndef OPENSSL_NO_ENGINE
 	if (gen_eng)
 		ENGINE_free(gen_eng);
@@ -1781,68 +1768,3 @@ static int genpkey_cb(EVP_PKEY_CTX *ctx)
 #endif
 	return 1;
 	}
-
-static int do_sign_init(BIO *err, EVP_MD_CTX *ctx, EVP_PKEY *pkey,
-			const EVP_MD *md, STACK_OF(OPENSSL_STRING) *sigopts)
-	{
-	EVP_PKEY_CTX *pkctx = NULL;
-	int i;
-	EVP_MD_CTX_init(ctx);
-	if (!EVP_DigestSignInit(ctx, &pkctx, md, NULL, pkey))
-		return 0;
-	for (i = 0; i < sk_OPENSSL_STRING_num(sigopts); i++)
-		{
-		char *sigopt = sk_OPENSSL_STRING_value(sigopts, i);
-		if (pkey_ctrl_string(pkctx, sigopt) <= 0)
-			{
-			BIO_printf(err, "parameter error \"%s\"\n", sigopt);
-			ERR_print_errors(bio_err);
-			return 0;
-			}
-		}
-	return 1;
-	}
-
-int do_X509_sign(BIO *err, X509 *x, EVP_PKEY *pkey, const EVP_MD *md,
-			STACK_OF(OPENSSL_STRING) *sigopts)
-	{
-	int rv;
-	EVP_MD_CTX mctx;
-	EVP_MD_CTX_init(&mctx);
-	rv = do_sign_init(err, &mctx, pkey, md, sigopts);
-	if (rv > 0)
-		rv = X509_sign_ctx(x, &mctx);
-	EVP_MD_CTX_cleanup(&mctx);
-	return rv > 0 ? 1 : 0;
-	}
-
-
-int do_X509_REQ_sign(BIO *err, X509_REQ *x, EVP_PKEY *pkey, const EVP_MD *md,
-			STACK_OF(OPENSSL_STRING) *sigopts)
-	{
-	int rv;
-	EVP_MD_CTX mctx;
-	EVP_MD_CTX_init(&mctx);
-	rv = do_sign_init(err, &mctx, pkey, md, sigopts);
-	if (rv > 0)
-		rv = X509_REQ_sign_ctx(x, &mctx);
-	EVP_MD_CTX_cleanup(&mctx);
-	return rv > 0 ? 1 : 0;
-	}
-		
-	
-
-int do_X509_CRL_sign(BIO *err, X509_CRL *x, EVP_PKEY *pkey, const EVP_MD *md,
-			STACK_OF(OPENSSL_STRING) *sigopts)
-	{
-	int rv;
-	EVP_MD_CTX mctx;
-	EVP_MD_CTX_init(&mctx);
-	rv = do_sign_init(err, &mctx, pkey, md, sigopts);
-	if (rv > 0)
-		rv = X509_CRL_sign_ctx(x, &mctx);
-	EVP_MD_CTX_cleanup(&mctx);
-	return rv > 0 ? 1 : 0;
-	}
-		
-	
--- a/apps/s_apps.h
+++ b/apps/s_apps.h
@@ -148,19 +148,14 @@ typedef fd_mask fd_set;
 #define PORT_STR        "4433"
 #define PROTOCOL        "tcp"

-int do_server(int port, int type, int *ret, int (*cb) (char *hostname, int s, int stype, unsigned char *context), unsigned char *context, int naccept);
+int do_server(int port, int type, int *ret, int (*cb) (char *hostname, int s, unsigned char *context), unsigned char *context);
 #ifdef HEADER_X509_H
 int MS_CALLBACK verify_callback(int ok, X509_STORE_CTX *ctx);
 #endif
 #ifdef HEADER_SSL_H
 int set_cert_stuff(SSL_CTX *ctx, char *cert_file, char *key_file);
-int set_cert_key_stuff(SSL_CTX *ctx, X509 *cert, EVP_PKEY *key,
-					STACK_OF(X509) *chain, int build_chain);
-int ssl_print_sigalgs(BIO *out, SSL *s);
-int ssl_print_point_formats(BIO *out, SSL *s);
-int ssl_print_curves(BIO *out, SSL *s, int noshared);
+int set_cert_key_stuff(SSL_CTX *ctx, X509 *cert, EVP_PKEY *key);
 #endif
-int ssl_print_tmp_key(BIO *out, SSL *s);
 int init_client(int *sock, char *server, int port, int type);
 int should_retry(int i);
 int extract_port(char *str, short *port_ptr);
@@ -179,23 +174,3 @@ void MS_CALLBACK tlsext_cb(SSL *s, int client_server, int type,

 int MS_CALLBACK generate_cookie_callback(SSL *ssl, unsigned char *cookie, unsigned int *cookie_len);
 int MS_CALLBACK verify_cookie_callback(SSL *ssl, unsigned char *cookie, unsigned int cookie_len);
-
-typedef struct ssl_excert_st SSL_EXCERT;
-
-void ssl_ctx_set_excert(SSL_CTX *ctx, SSL_EXCERT *exc);
-void ssl_excert_free(SSL_EXCERT *exc);
-int args_excert(char ***pargs, int *pargc,
-			int *badarg, BIO *err, SSL_EXCERT **pexc);
-int load_excert(SSL_EXCERT **pexc, BIO *err);
-void print_ssl_summary(BIO *bio, SSL *s);
-#ifdef HEADER_SSL_H
-int args_ssl(char ***pargs, int *pargc, SSL_CONF_CTX *cctx,
-			int *badarg, BIO *err, STACK_OF(OPENSSL_STRING) **pstr);
-int args_ssl_call(SSL_CTX *ctx, BIO *err, SSL_CONF_CTX *cctx,
-		STACK_OF(OPENSSL_STRING) *str, int no_ecdhe, int no_jpake);
-int ssl_ctx_add_crls(SSL_CTX *ctx, STACK_OF(X509_CRL) *crls, int crl_download);
-int ssl_load_stores(SSL_CTX *ctx,
-			const char *vfyCApath, const char *vfyCAfile,
-			const char *chCApath, const char *chCAfile,
-			STACK_OF(X509_CRL) *crls, int crl_download);
-#endif
--- a/apps/s_cb.c
+++ b/apps/s_cb.c
--- a/apps/s_client.c
+++ b/apps/s_client.c
--- a/apps/s_server.c
+++ b/apps/s_server.c
--- a/apps/s_socket.c
+++ b/apps/s_socket.c
@@ -238,10 +238,11 @@ int init_client(int *sock, char *host, int port, int type)
 	{
 	unsigned char ip[4];

-	memset(ip, '\0', sizeof ip);
 	if (!host_ip(host,&(ip[0])))
-		return 0;
-	return init_client_ip(sock,ip,port,type);
+		{
+		return(0);
+		}
+	return(init_client_ip(sock,ip,port,type));
 	}

 static int init_client_ip(int *sock, unsigned char ip[4], int port, int type)
@@ -284,7 +285,7 @@ static int init_client_ip(int *sock, unsigned char ip[4], int port, int type)
 	return(1);
 	}

-int do_server(int port, int type, int *ret, int (*cb)(char *hostname, int s, int stype, unsigned char *context), unsigned char *context, int naccept)
+int do_server(int port, int type, int *ret, int (*cb)(char *hostname, int s, unsigned char *context), unsigned char *context)
 	{
 	int sock;
 	char *name = NULL;
@@ -310,13 +311,11 @@ int do_server(int port, int type, int *ret, int (*cb)(char *hostname, int s, int
 			}
 		else
 			sock = accept_socket;
-		i=(*cb)(name,sock, type, context);
+		i=(*cb)(name,sock, context);
 		if (name != NULL) OPENSSL_free(name);
 		if (type==SOCK_STREAM)
 			SHUTDOWN2(sock);
-		if (naccept != -1)
-			naccept--;
-		if (i < 0 || naccept == 0)
+		if (i < 0)
 			{
 			SHUTDOWN2(accept_socket);
 			return(i);
--- a/apps/server.pem
+++ b/apps/server.pem
@@ -1,52 +1,369 @@
-subject= C = UK, O = OpenSSL Group, OU = FOR TESTING PURPOSES ONLY, CN = Test Server Cert
-issuer= C = UK, O = OpenSSL Group, OU = FOR TESTING PURPOSES ONLY, CN = OpenSSL Test Intermediate CA
+issuer= /C=AU/ST=Queensland/O=CryptSoft Pty Ltd/CN=Test CA (1024 bit)
+subject= /C=AU/ST=Queensland/O=CryptSoft Pty Ltd/CN=Server test cert (512 bit)
 -----BEGIN CERTIFICATE-----
-MIID5zCCAs+gAwIBAgIJALnu1NlVpZ6zMA0GCSqGSIb3DQEBBQUAMHAxCzAJBgNV
-BAYTAlVLMRYwFAYDVQQKDA1PcGVuU1NMIEdyb3VwMSIwIAYDVQQLDBlGT1IgVEVT
-VElORyBQVVJQT1NFUyBPTkxZMSUwIwYDVQQDDBxPcGVuU1NMIFRlc3QgSW50ZXJt
-ZWRpYXRlIENBMB4XDTExMTIwODE0MDE0OFoXDTIxMTAxNjE0MDE0OFowZDELMAkG
-A1UEBhMCVUsxFjAUBgNVBAoMDU9wZW5TU0wgR3JvdXAxIjAgBgNVBAsMGUZPUiBU
-RVNUSU5HIFBVUlBPU0VTIE9OTFkxGTAXBgNVBAMMEFRlc3QgU2VydmVyIENlcnQw
-ggEiMA0GCSqGSIb3DQEBAQUAA4IBDwAwggEKAoIBAQDzhPOSNtyyRspmeuUpxfNJ
-KCLTuf7g3uQ4zu4iHOmRO5TQci+HhVlLZrHF9XqFXcIP0y4pWDbMSGuiorUmzmfi
-R7bfSdI/+qIQt8KXRH6HNG1t8ou0VSvWId5TS5Dq/er5ODUr9OaaDva7EquHIcMv
-vPQGuI+OEAcnleVCy9HVEIySrO4P3CNIicnGkwwiAud05yUAq/gPXBC1hTtmlPD7
-TVcGVSEiJdvzqqlgv02qedGrkki6GY4S7GjZxrrf7Foc2EP+51LJzwLQx3/JfrCU
-41NEWAsu/Sl0tQabXESN+zJ1pDqoZ3uHMgpQjeGiE0olr+YcsSW/tJmiU9OiAr8R
-AgMBAAGjgY8wgYwwDAYDVR0TAQH/BAIwADAOBgNVHQ8BAf8EBAMCBeAwLAYJYIZI
-AYb4QgENBB8WHU9wZW5TU0wgR2VuZXJhdGVkIENlcnRpZmljYXRlMB0GA1UdDgQW
-BBSCvM8AABPR9zklmifnr9LvIBturDAfBgNVHSMEGDAWgBQ2w2yI55X+sL3szj49
-hqshgYfa2jANBgkqhkiG9w0BAQUFAAOCAQEAqb1NV0B0/pbpK9Z4/bNjzPQLTRLK
-WnSNm/Jh5v0GEUOE/Beg7GNjNrmeNmqxAlpqWz9qoeoFZax+QBpIZYjROU3TS3fp
-yLsrnlr0CDQ5R7kCCDGa8dkXxemmpZZLbUCpW2Uoy8sAA4JjN9OtsZY7dvUXFgJ7
-vVNTRnI01ghknbtD+2SxSQd3CWF6QhcRMAzZJ1z1cbbwGDDzfvGFPzJ+Sq+zEPds
-xoVLLSetCiBc+40ZcDS5dV98h9XD7JMTQfxzA7mNGv73JoZJA6nFgj+ADSlJsY/t
-JBv+z1iQRueoh9Qeee+ZbRifPouCB8FDx+AltvHTANdAq0t/K3o+pplMVA==
+MIIB6TCCAVICAQYwDQYJKoZIhvcNAQEEBQAwWzELMAkGA1UEBhMCQVUxEzARBgNV
+BAgTClF1ZWVuc2xhbmQxGjAYBgNVBAoTEUNyeXB0U29mdCBQdHkgTHRkMRswGQYD
+VQQDExJUZXN0IENBICgxMDI0IGJpdCkwHhcNMDAxMDE2MjIzMTAzWhcNMDMwMTE0
+MjIzMTAzWjBjMQswCQYDVQQGEwJBVTETMBEGA1UECBMKUXVlZW5zbGFuZDEaMBgG
+A1UEChMRQ3J5cHRTb2Z0IFB0eSBMdGQxIzAhBgNVBAMTGlNlcnZlciB0ZXN0IGNl
+cnQgKDUxMiBiaXQpMFwwDQYJKoZIhvcNAQEBBQADSwAwSAJBAJ+zw4Qnlf8SMVIP
+Fe9GEcStgOY2Ww/dgNdhjeD8ckUJNP5VZkVDTGiXav6ooKXfX3j/7tdkuD8Ey2//
+Kv7+ue0CAwEAATANBgkqhkiG9w0BAQQFAAOBgQCT0grFQeZaqYb5EYfk20XixZV4
+GmyAbXMftG1Eo7qGiMhYzRwGNWxEYojf5PZkYZXvSqZ/ZXHXa4g59jK/rJNnaVGM
+k+xIX8mxQvlV0n5O9PIha5BX5teZnkHKgL8aKKLKW1BK7YTngsfSzzaeame5iKfz
+itAE+OjGF+PFKbwX8Q==
 -----END CERTIFICATE-----
 -----BEGIN RSA PRIVATE KEY-----
-MIIEpAIBAAKCAQEA84TzkjbcskbKZnrlKcXzSSgi07n+4N7kOM7uIhzpkTuU0HIv
-h4VZS2axxfV6hV3CD9MuKVg2zEhroqK1Js5n4ke230nSP/qiELfCl0R+hzRtbfKL
-tFUr1iHeU0uQ6v3q+Tg1K/Tmmg72uxKrhyHDL7z0BriPjhAHJ5XlQsvR1RCMkqzu
-D9wjSInJxpMMIgLndOclAKv4D1wQtYU7ZpTw+01XBlUhIiXb86qpYL9NqnnRq5JI
-uhmOEuxo2ca63+xaHNhD/udSyc8C0Md/yX6wlONTRFgLLv0pdLUGm1xEjfsydaQ6
-qGd7hzIKUI3hohNKJa/mHLElv7SZolPTogK/EQIDAQABAoIBAADq9FwNtuE5IRQn
-zGtO4q7Y5uCzZ8GDNYr9RKp+P2cbuWDbvVAecYq2NV9QoIiWJOAYZKklOvekIju3
-r0UZLA0PRiIrTg6NrESx3JrjWDK8QNlUO7CPTZ39/K+FrmMkV9lem9yxjJjyC34D
-AQB+YRTx+l14HppjdxNwHjAVQpIx/uO2F5xAMuk32+3K+pq9CZUtrofe1q4Agj9R
-5s8mSy9pbRo9kW9wl5xdEotz1LivFOEiqPUJTUq5J5PeMKao3vdK726XI4Z455Nm
-W2/MA0YV0ug2FYinHcZdvKM6dimH8GLfa3X8xKRfzjGjTiMSwsdjgMa4awY3tEHH
-674jhAECgYEA/zqMrc0zsbNk83sjgaYIug5kzEpN4ic020rSZsmQxSCerJTgNhmg
-utKSCt0Re09Jt3LqG48msahX8ycqDsHNvlEGPQSbMu9IYeO3Wr3fAm75GEtFWePY
-BhM73I7gkRt4s8bUiUepMG/wY45c5tRF23xi8foReHFFe9MDzh8fJFECgYEA9EFX
-4qAik1pOJGNei9BMwmx0I0gfVEIgu0tzeVqT45vcxbxr7RkTEaDoAG6PlbWP6D9a
-WQNLp4gsgRM90ZXOJ4up5DsAWDluvaF4/omabMA+MJJ5kGZ0gCj5rbZbKqUws7x8
-bp+6iBfUPJUbcqNqFmi/08Yt7vrDnMnyMw2A/sECgYEAiiuRMxnuzVm34hQcsbhH
-6ymVqf7j0PW2qK0F4H1ocT9qhzWFd+RB3kHWrCjnqODQoI6GbGr/4JepHUpre1ex
-4UEN5oSS3G0ru0rC3U4C59dZ5KwDHFm7ffZ1pr52ljfQDUsrjjIMRtuiwNK2OoRa
-WSsqiaL+SDzSB+nBmpnAizECgYBdt/y6rerWUx4MhDwwtTnel7JwHyo2MDFS6/5g
-n8qC2Lj6/fMDRE22w+CA2esp7EJNQJGv+b27iFpbJEDh+/Lf5YzIT4MwVskQ5bYB
-JFcmRxUVmf4e09D7o705U/DjCgMH09iCsbLmqQ38ONIRSHZaJtMDtNTHD1yi+jF+
-OT43gQKBgQC/2OHZoko6iRlNOAQ/tMVFNq7fL81GivoQ9F1U0Qr+DH3ZfaH8eIkX
-xT0ToMPJUzWAn8pZv0snA0um6SIgvkCuxO84OkANCVbttzXImIsL7pFzfcwV/ERK
-UM6j0ZuSMFOCr/lGPAoOQU0fskidGEHi1/kW+suSr28TqsyYZpwBDQ==
+MIIBPAIBAAJBAJ+zw4Qnlf8SMVIPFe9GEcStgOY2Ww/dgNdhjeD8ckUJNP5VZkVD
+TGiXav6ooKXfX3j/7tdkuD8Ey2//Kv7+ue0CAwEAAQJAN6W31vDEP2DjdqhzCDDu
+OA4NACqoiFqyblo7yc2tM4h4xMbC3Yx5UKMN9ZkCtX0gzrz6DyF47bdKcWBzNWCj
+gQIhANEoojVt7hq+SQ6MCN6FTAysGgQf56Q3TYoJMoWvdiXVAiEAw3e3rc+VJpOz
+rHuDo6bgpjUAAXM+v3fcpsfZSNO6V7kCIQCtbVjanpUwvZkMI9by02oUk9taki3b
+PzPfAfNPYAbCJQIhAJXNQDWyqwn/lGmR11cqY2y9nZ1+5w3yHGatLrcDnQHxAiEA
+vnlEGo8K85u+KwIOimM48ZG8oTk7iFdkqLJR1utT3aU=
 -----END RSA PRIVATE KEY-----
+subject=/C=US/O=AT&T Bell Laboratories/OU=Prototype Research CA
+issuer= /C=US/O=AT&T Bell Laboratories/OU=Prototype Research CA
+notBefore=950413210656Z
+notAfter =970412210656Z
+-----BEGIN X509 CERTIFICATE-----
+
+MIICCDCCAXECAQAwDQYJKoZIhvcNAQEEBQAwTjELMAkGA1UEBhMCVVMxHzAdBgNV
+BAoUFkFUJlQgQmVsbCBMYWJvcmF0b3JpZXMxHjAcBgNVBAsUFVByb3RvdHlwZSBS
+ZXNlYXJjaCBDQTAeFw05NTA0MTMyMTA2NTZaFw05NzA0MTIyMTA2NTZaME4xCzAJ
+BgNVBAYTAlVTMR8wHQYDVQQKFBZBVCZUIEJlbGwgTGFib3JhdG9yaWVzMR4wHAYD
+VQQLFBVQcm90b3R5cGUgUmVzZWFyY2ggQ0EwgZwwDQYJKoZIhvcNAQEBBQADgYoA
+MIGGAoGAebOmgtSCl+wCYZc86UGYeTLY8cjmW2P0FN8ToT/u2pECCoFdrlycX0OR
+3wt0ZhpFXLVNeDnHwEE9veNUih7pCL2ZBFqoIoQkB1lZmXRiVtjGonz8BLm/qrFM
+YHb0lme/Ol+s118mwKVxnn6bSAeI/OXKhLaVdYZWk+aEaxEDkVkCAQ8wDQYJKoZI
+hvcNAQEEBQADgYEAAZMG14lZmZ8bahkaHaTV9dQf4p2FZiQTFwHP9ZyGsXPC+LT5
+dG5iTaRmyjNIJdPWohZDl97kAci79aBndvuEvRKOjLHs3WRGBIwERnAcnY9Mz8u/
+zIHK23PjYVxGGaZd669OJwD0CYyqH22HH9nFUGaoJdsv39ChW0NRdLE9+y8=
+-----END X509 CERTIFICATE-----
+issuer= /C=AU/ST=Queensland/O=CryptSoft Pty Ltd/CN=Test PCA (1024 bit)
+subject=/C=AU/ST=Queensland/O=CryptSoft Pty Ltd/CN=Test CA (1024 bit)
+-----BEGIN CERTIFICATE-----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+-----END CERTIFICATE-----
+-----BEGIN RSA PRIVATE KEY-----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+-----END RSA PRIVATE KEY-----
+-----BEGIN X509 CERTIFICATE-----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+-----END X509 CERTIFICATE-----
+-----BEGIN X509 CERTIFICATE-----
+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+-----END X509 CERTIFICATE-----
+-----BEGIN CERTIFICATE-----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+-----END CERTIFICATE-----
+-----BEGIN CERTIFICATE-----
+MIIB6jCCAZQCAgEtMA0GCSqGSIb3DQEBBAUAMIGAMQswCQYDVQQGEwJVUzE2MDQG
+A1UEChMtTmF0aW9uYWwgQWVyb25hdXRpY3MgYW5kIFNwYWNlIEFkbWluaXN0cmF0
+aW9uMRkwFwYDVQQLExBUZXN0IEVudmlyb25tZW50MR4wHAYDVQQLExVNRDUtUlNB
+LU5BU0EtUGlsb3QtQ0EwHhcNOTYwNDMwMjIwNTAwWhcNOTcwNDMwMjIwNTAwWjCB
+gDELMAkGA1UEBhMCVVMxNjA0BgNVBAoTLU5hdGlvbmFsIEFlcm9uYXV0aWNzIGFu
+ZCBTcGFjZSBBZG1pbmlzdHJhdGlvbjEZMBcGA1UECxMQVGVzdCBFbnZpcm9ubWVu
+dDEeMBwGA1UECxMVTUQ1LVJTQS1OQVNBLVBpbG90LUNBMFkwCgYEVQgBAQICAgAD
+SwAwSAJBALmmX5+GqAvcrWK13rfDrNX9UfeA7f+ijyBgeFQjYUoDpFqapw4nzQBL
+bAXug8pKkRwa2Zh8YODhXsRWu2F/UckCAwEAATANBgkqhkiG9w0BAQQFAANBAH9a
+OBA+QCsjxXgnSqHx04gcU8S49DVUb1f2XVoLnHlIb8RnX0k5O6mpHT5eti9bLkiW
+GJNMJ4L0AJ/ac+SmHZc=
+-----END CERTIFICATE-----
+-----BEGIN CERTIFICATE-----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==
+-----END CERTIFICATE-----
+
+issuer= /C=AU/ST=Queensland/O=CryptSoft Pty Ltd/CN=Test PCA (1024 bit)
+subject=/C=AU/ST=Queensland/O=CryptSoft Pty Ltd/CN=Test PCA (1024 bit)
+-----BEGIN CERTIFICATE-----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+-----END CERTIFICATE-----
+-----BEGIN RSA PRIVATE KEY-----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+-----END RSA PRIVATE KEY-----
+subject=/C=US/O=RSA Data Security, Inc./OU=Commercial Certification Authority
+issuer= /C=US/O=RSA Data Security, Inc./OU=Commercial Certification Authority
+notBefore=941104185834Z
+notAfter =991103185834Z
+-----BEGIN X509 CERTIFICATE-----
+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+-----END X509 CERTIFICATE-----
+subject=/C=US/O=RSA Data Security, Inc./OU=Secure Server Certification Authority
+issuer= /C=US/O=RSA Data Security, Inc./OU=Secure Server Certification Authority
+notBefore=941109235417Z
+notAfter =991231235417Z
+-----BEGIN X509 CERTIFICATE-----
+
+MIICKTCCAZYCBQJBAAABMA0GCSqGSIb3DQEBAgUAMF8xCzAJBgNVBAYTAlVTMSAw
+HgYDVQQKExdSU0EgRGF0YSBTZWN1cml0eSwgSW5jLjEuMCwGA1UECxMlU2VjdXJl
+IFNlcnZlciBDZXJ0aWZpY2F0aW9uIEF1dGhvcml0eTAeFw05NDExMDkyMzU0MTda
+Fw05OTEyMzEyMzU0MTdaMF8xCzAJBgNVBAYTAlVTMSAwHgYDVQQKExdSU0EgRGF0
+YSBTZWN1cml0eSwgSW5jLjEuMCwGA1UECxMlU2VjdXJlIFNlcnZlciBDZXJ0aWZp
+Y2F0aW9uIEF1dGhvcml0eTCBmzANBgkqhkiG9w0BAQEFAAOBiQAwgYUCfgCSznrB
+roM+WqqJg1esJQF2DK2ujiw3zus1eGRUA+WEQFHJv48I4oqCCNIWhjdV6bEhAq12
+aIGaBaJLyUslZiJWbIgHj/eBWW2EB2VwE3F2Ppt3TONQiVaYSLkdpykaEy5KEVmc
+HhXVSVQsczppgrGXOZxtcGdI5d0t1sgeewIDAQABMA0GCSqGSIb3DQEBAgUAA34A
+iNHReSHO4ovo+MF9NFM/YYPZtgs4F7boviGNjwC4i1N+RGceIr2XJ+CchcxK9oU7
+suK+ktPlDemvXA4MRpX/oRxePug2WHpzpgr4IhFrwwk4fia7c+8AvQKk8xQNMD9h
+cHsg/jKjn7P0Z1LctO6EjJY2IN6BCINxIYoPnqk=
+-----END X509 CERTIFICATE-----
+subject=/C=ZA/SP=Western Cape/L=Cape Town/O=Thawte Consulting cc
+	/OU=Certification Services Division/CN=Thawte Server CA
+	/Email=server-certs@thawte.com
+issuer= /C=ZA/SP=Western Cape/L=Cape Town/O=Thawte Consulting cc
+	/OU=Certification Services Division/CN=Thawte Server CA
+	/Email=server-certs@thawte.com
+-----BEGIN CERTIFICATE-----
+MIIC+TCCAmICAQAwDQYJKoZIhvcNAQEEBQAwgcQxCzAJBgNVBAYTAlpBMRUwEwYD
+VQQIEwxXZXN0ZXJuIENhcGUxEjAQBgNVBAcTCUNhcGUgVG93bjEdMBsGA1UEChMU
+VGhhd3RlIENvbnN1bHRpbmcgY2MxKDAmBgNVBAsTH0NlcnRpZmljYXRpb24gU2Vy
+dmljZXMgRGl2aXNpb24xGTAXBgNVBAMTEFRoYXd0ZSBTZXJ2ZXIgQ0ExJjAkBgkq
+hkiG9w0BCQEWF3NlcnZlci1jZXJ0c0B0aGF3dGUuY29tMB4XDTk2MDcyNzE4MDc1
+N1oXDTk4MDcyNzE4MDc1N1owgcQxCzAJBgNVBAYTAlpBMRUwEwYDVQQIEwxXZXN0
+ZXJuIENhcGUxEjAQBgNVBAcTCUNhcGUgVG93bjEdMBsGA1UEChMUVGhhd3RlIENv
+bnN1bHRpbmcgY2MxKDAmBgNVBAsTH0NlcnRpZmljYXRpb24gU2VydmljZXMgRGl2
+aXNpb24xGTAXBgNVBAMTEFRoYXd0ZSBTZXJ2ZXIgQ0ExJjAkBgkqhkiG9w0BCQEW
+F3NlcnZlci1jZXJ0c0B0aGF3dGUuY29tMIGfMA0GCSqGSIb3DQEBAQUAA4GNADCB
+iQKBgQDTpFBuyP9Wa+bPXbbqDGh1R6KqwtqEJfyo9EdR2oW1IHSUhh4PdcnpCGH1
+Bm0wbhUZAulSwGLbTZme4moMRDjN/r7jZAlwxf6xaym2L0nIO9QnBCUQly/nkG3A
+KEKZ10xD3sP1IW1Un13DWOHA5NlbsLjctHvfNjrCtWYiEtaHDQIDAQABMA0GCSqG
+SIb3DQEBBAUAA4GBAIsvn7ifX3RUIrvYXtpI4DOfARkTogwm6o7OwVdl93yFhDcX
+7h5t0XZ11MUAMziKdde3rmTvzUYIUCYoY5b032IwGMTvdiclK+STN6NP2m5nvFAM
+qJT5gC5O+j/jBuZRQ4i0AMYQr5F4lT8oBJnhgafw6PL8aDY2vMHGSPl9+7uf
+-----END CERTIFICATE-----
+
+-----BEGIN CERTIFICATE-----
+MIIDDTCCAnYCAQAwDQYJKoZIhvcNAQEEBQAwgc4xCzAJBgNVBAYTAlpBMRUwEwYD
+VQQIEwxXZXN0ZXJuIENhcGUxEjAQBgNVBAcTCUNhcGUgVG93bjEdMBsGA1UEChMU
+VGhhd3RlIENvbnN1bHRpbmcgY2MxKDAmBgNVBAsTH0NlcnRpZmljYXRpb24gU2Vy
+dmljZXMgRGl2aXNpb24xITAfBgNVBAMTGFRoYXd0ZSBQcmVtaXVtIFNlcnZlciBD
+QTEoMCYGCSqGSIb3DQEJARYZcHJlbWl1bS1zZXJ2ZXJAdGhhd3RlLmNvbTAeFw05
+NjA3MjcxODA3MTRaFw05ODA3MjcxODA3MTRaMIHOMQswCQYDVQQGEwJaQTEVMBMG
+A1UECBMMV2VzdGVybiBDYXBlMRIwEAYDVQQHEwlDYXBlIFRvd24xHTAbBgNVBAoT
+FFRoYXd0ZSBDb25zdWx0aW5nIGNjMSgwJgYDVQQLEx9DZXJ0aWZpY2F0aW9uIFNl
+cnZpY2VzIERpdmlzaW9uMSEwHwYDVQQDExhUaGF3dGUgUHJlbWl1bSBTZXJ2ZXIg
+Q0ExKDAmBgkqhkiG9w0BCQEWGXByZW1pdW0tc2VydmVyQHRoYXd0ZS5jb20wgZ8w
+DQYJKoZIhvcNAQEBBQADgY0AMIGJAoGBANI2NmqL18JbntqBQWKPOO5JBFXW0O8c
+G5UWR+8YSDU6UvQragaPOy/qVuOvho2eF/eetGV1Ak3vywmiIVHYm9Bn0LoNkgYU
+c9STy5cqAJxcTgy8+hVS/PJEbtoRSm4Iny8t4/mqOoZztkZTWMiJBb2DEbhzP6oH
+jfRCTedAnRw3AgMBAAEwDQYJKoZIhvcNAQEEBQADgYEAutFIgTRZVYerIZfL9lvR
+w9Eifvvo5KTZ3h+Bj+VzNnyw4Qc/IyXkPOu6SIiH9LQ3sCmWBdxpe+qr4l77rLj2
+GYuMtESFfn1XVALzkYgC7JcPuTOjMfIiMByt+uFf8AV8x0IW/Qkuv+hEQcyM9vxK
+3VZdLbCVIhNoEsysrxCpxcI=
+-----END CERTIFICATE-----
+Tims test GCI CA
+
+-----BEGIN CERTIFICATE-----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 
+-----END CERTIFICATE-----
+
+-----BEGIN CERTIFICATE-----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+-----END CERTIFICATE-----
+-----BEGIN CERTIFICATE-----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-----END CERTIFICATE-----
+
+ subject=/L=Internet/O=VeriSign, Inc./OU=VeriSign Class 2 CA - Individual Subscriber
+ issuer= /L=Internet/O=VeriSign, Inc./OU=VeriSign Class 2 CA - Individual Subscriber
+
+-----BEGIN CERTIFICATE-----
+MIIEkzCCA/ygAwIBAgIRANDTUpSRL3nTFeMrMayFSPAwDQYJKoZIhvcNAQECBQAw
+YjERMA8GA1UEBxMISW50ZXJuZXQxFzAVBgNVBAoTDlZlcmlTaWduLCBJbmMuMTQw
+MgYDVQQLEytWZXJpU2lnbiBDbGFzcyAyIENBIC0gSW5kaXZpZHVhbCBTdWJzY3Jp
+YmVyMB4XDTk2MDYwNDAwMDAwMFoXDTk4MDYwNDIzNTk1OVowYjERMA8GA1UEBxMI
+SW50ZXJuZXQxFzAVBgNVBAoTDlZlcmlTaWduLCBJbmMuMTQwMgYDVQQLEytWZXJp
+U2lnbiBDbGFzcyAyIENBIC0gSW5kaXZpZHVhbCBTdWJzY3JpYmVyMIGfMA0GCSqG
+SIb3DQEBAQUAA4GNADCBiQKBgQC6A+2czKGRcYMfm8gdnk+0de99TDDzsqo0v5nb
+RsbUmMcdRQ7nsMbRWe0SAb/9QoLTZ/cJ0iOBqdrkz7UpqqKarVoTSdlSMVM92tWp
+3bJncZHQD1t4xd6lQVdI1/T6R+5J0T1ukOdsI9Jmf+F28S6g3R3L1SFwiHKeZKZv
+z+793wIDAQABo4ICRzCCAkMwggIpBgNVHQMBAf8EggIdMIICGTCCAhUwggIRBgtg
+hkgBhvhFAQcBATCCAgAWggGrVGhpcyBjZXJ0aWZpY2F0ZSBpbmNvcnBvcmF0ZXMg
+YnkgcmVmZXJlbmNlLCBhbmQgaXRzIHVzZSBpcyBzdHJpY3RseSBzdWJqZWN0IHRv
+LCB0aGUgVmVyaVNpZ24gQ2VydGlmaWNhdGlvbiBQcmFjdGljZSBTdGF0ZW1lbnQg
+KENQUyksIGF2YWlsYWJsZSBhdDogaHR0cHM6Ly93d3cudmVyaXNpZ24uY29tL0NQ
+Uy0xLjA7IGJ5IEUtbWFpbCBhdCBDUFMtcmVxdWVzdHNAdmVyaXNpZ24uY29tOyBv
+ciBieSBtYWlsIGF0IFZlcmlTaWduLCBJbmMuLCAyNTkzIENvYXN0IEF2ZS4sIE1v
+dW50YWluIFZpZXcsIENBIDk0MDQzIFVTQSBUZWwuICsxICg0MTUpIDk2MS04ODMw
+IENvcHlyaWdodCAoYykgMTk5NiBWZXJpU2lnbiwgSW5jLiAgQWxsIFJpZ2h0cyBS
+ZXNlcnZlZC4gQ0VSVEFJTiBXQVJSQU5USUVTIERJU0NMQUlNRUQgYW5kIExJQUJJ
+TElUWSBMSU1JVEVELqAOBgxghkgBhvhFAQcBAQGhDgYMYIZIAYb4RQEHAQECMC8w
+LRYraHR0cHM6Ly93d3cudmVyaXNpZ24uY29tL3JlcG9zaXRvcnkvQ1BTLTEuMDAU
+BglghkgBhvhCAQEBAf8EBAMCAgQwDQYJKoZIhvcNAQECBQADgYEApRJRkNBqLLgs
+53IR/d18ODdLOWMTZ+QOOxBrq460iBEdUwgF8vmPRX1ku7UiDeNzaLlurE6eFqHq
+2zPyK5j60zfTLVJMWKcQWwTJLjHtXrW8pxhNtFc6Fdvy5ZkHnC/9NIl7/t4U6WqB
+p4y+p7SdMIkEwIZfds0VbnQyX5MRUJY=
+-----END CERTIFICATE-----
+
+ subject=/C=US/O=VeriSign, Inc./OU=Class 3 Public Primary Certification Authority
+ issuer= /C=US/O=VeriSign, Inc./OU=Class 3 Public Primary Certification Authority
+-----BEGIN CERTIFICATE-----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+-----END CERTIFICATE-----
+ subject=/C=US/O=VeriSign, Inc./OU=Class 4 Public Primary Certification Authority
+ issuer= /C=US/O=VeriSign, Inc./OU=Class 4 Public Primary Certification Authority
+-----BEGIN CERTIFICATE-----
+MIICMTCCAZoCBQKmAAABMA0GCSqGSIb3DQEBAgUAMF8xCzAJBgNVBAYTAlVTMRcw
+FQYDVQQKEw5WZXJpU2lnbiwgSW5jLjE3MDUGA1UECxMuQ2xhc3MgNCBQdWJsaWMg
+UHJpbWFyeSBDZXJ0aWZpY2F0aW9uIEF1dGhvcml0eTAeFw05NjAxMjkwMDAwMDBa
+Fw05OTEyMzEyMzU5NTlaMF8xCzAJBgNVBAYTAlVTMRcwFQYDVQQKEw5WZXJpU2ln
+biwgSW5jLjE3MDUGA1UECxMuQ2xhc3MgNCBQdWJsaWMgUHJpbWFyeSBDZXJ0aWZp
+Y2F0aW9uIEF1dGhvcml0eTCBnzANBgkqhkiG9w0BAQEFAAOBjQAwgYkCgYEA0LJ1
+9njQrlpQ9OlQqZ+M1++RlHDo0iSQdomF1t+s5gEXMoDwnZNHvJplnR+Xrr/phnVj
+IIm9gFidBAydqMEk6QvlMXi9/C0MN2qeeIDpRnX57aP7E3vIwUzSo+/1PLBij0pd
+O92VZ48TucE81qcmm+zDO3rZTbxtm+gVAePwR6kCAwEAATANBgkqhkiG9w0BAQIF
+AAOBgQBT3dPwnCR+QKri/AAa19oM/DJhuBUNlvP6Vxt/M3yv6ZiaYch6s7f/sdyZ
+g9ysEvxwyR84Qu1E9oAuW2szaayc01znX1oYx7EteQSWQZGZQbE8DbqEOcY7l/Am
+yY7uvcxClf8exwI/VAx49byqYHwCaejcrOICdmHEPgPq0ook0Q==
+-----END CERTIFICATE-----
--- a/apps/server2.pem
+++ b/apps/server2.pem
@@ -1,52 +1,376 @@
-subject= C = UK, O = OpenSSL Group, OU = FOR TESTING PURPOSES ONLY, CN = Test Server Cert #2
-issuer= C = UK, O = OpenSSL Group, OU = FOR TESTING PURPOSES ONLY, CN = OpenSSL Test Intermediate CA
+issuer= /C=AU/ST=Queensland/O=CryptSoft Pty Ltd/CN=Test CA (1024 bit)
+subject=/C=AU/ST=Queensland/O=CryptSoft Pty Ltd/CN=Server test cert (1024 bit)
 -----BEGIN CERTIFICATE-----
-MIID6jCCAtKgAwIBAgIJALnu1NlVpZ60MA0GCSqGSIb3DQEBBQUAMHAxCzAJBgNV
-BAYTAlVLMRYwFAYDVQQKDA1PcGVuU1NMIEdyb3VwMSIwIAYDVQQLDBlGT1IgVEVT
-VElORyBQVVJQT1NFUyBPTkxZMSUwIwYDVQQDDBxPcGVuU1NMIFRlc3QgSW50ZXJt
-ZWRpYXRlIENBMB4XDTExMTIwODE0MDE0OFoXDTIxMTAxNjE0MDE0OFowZzELMAkG
-A1UEBhMCVUsxFjAUBgNVBAoMDU9wZW5TU0wgR3JvdXAxIjAgBgNVBAsMGUZPUiBU
-RVNUSU5HIFBVUlBPU0VTIE9OTFkxHDAaBgNVBAMME1Rlc3QgU2VydmVyIENlcnQg
-IzIwggEiMA0GCSqGSIb3DQEBAQUAA4IBDwAwggEKAoIBAQDrdi7j9yctG+L4EjBy
-gjPmEqZzOJEQba26MoQGzglU7e5Xf59Rb/hgVQuKAoiZe7/R8rK4zJ4W7iXdXw0L
-qBpyG8B5aGKeI32w+A9TcBApoXXL2CrYQEQjZwUIpLlYBIi2NkJj3nVkq5dgl1gO
-ALiQ+W8jg3kzg5Ec9rimp9r93N8wsSL3awsafurmYCvOf7leHaMP1WJ/zDRGUNHG
-/WtDjXc8ZUG1+6EXU9Jc2Fs+2Omf7fcN0l00AK/wPg8OaNS0rKyGq9JdIT9FRGV1
-bXe/rx58FaE5CItdwCSYhJvF/O95LWQoxJXye5bCFLmvDTEyVq9FMSCptfsmbXjE
-ZGsXAgMBAAGjgY8wgYwwDAYDVR0TAQH/BAIwADAOBgNVHQ8BAf8EBAMCBeAwLAYJ
-YIZIAYb4QgENBB8WHU9wZW5TU0wgR2VuZXJhdGVkIENlcnRpZmljYXRlMB0GA1Ud
-DgQWBBR52UaWWTKzZGDH/X4mWNcuqeQVazAfBgNVHSMEGDAWgBQ2w2yI55X+sL3s
-zj49hqshgYfa2jANBgkqhkiG9w0BAQUFAAOCAQEANBW+XYLlHBqVY/31ie+3gRlS
-LPfy4SIqn0t3RJjagT29MXprblBO2cbMO8VGjkQdKGpmMXjxbht2arOOUXRHX4n/
-XTyn/QHEf0bcwIITMReO3DZUPAEw8hSjn9xEOM0IRVOCP+mH5fi74QzzQaZVCyYg
-5VtLKdww/+sc0nCbKl2KWgDluriH0nfVx95qgW3mg9dhXRr0zmf1w2zkBHYpARYL
-Dew6Z8EE4tS3HJu8/qM6meWzNtrfonQ3eiiMxjZBxzV46jchBwa2z9XYhP6AmpPb
-oeTSzcQNbWsxaGYzWo46oLDUZmJOwSBawbS31bZNMCoPIY6ukoesCzFSsUKZww==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 -----END CERTIFICATE-----
 -----BEGIN RSA PRIVATE KEY-----
-MIIEowIBAAKCAQEA63Yu4/cnLRvi+BIwcoIz5hKmcziREG2tujKEBs4JVO3uV3+f
-UW/4YFULigKImXu/0fKyuMyeFu4l3V8NC6gachvAeWhiniN9sPgPU3AQKaF1y9gq
-2EBEI2cFCKS5WASItjZCY951ZKuXYJdYDgC4kPlvI4N5M4ORHPa4pqfa/dzfMLEi
-92sLGn7q5mArzn+5Xh2jD9Vif8w0RlDRxv1rQ413PGVBtfuhF1PSXNhbPtjpn+33
-DdJdNACv8D4PDmjUtKyshqvSXSE/RURldW13v68efBWhOQiLXcAkmISbxfzveS1k
-KMSV8nuWwhS5rw0xMlavRTEgqbX7Jm14xGRrFwIDAQABAoIBAHLsTPihIfLnYIE5
-x4GsQQ5zXeBw5ITDM37ktwHnQDC+rIzyUl1aLD1AZRBoKinXd4lOTqLZ4/NHKx4A
-DYr58mZtWyUmqLOMmQVuHXTZBlp7XtYuXMMNovQwjQlp9LicBeoBU6gQ5PVMtubD
-F4xGF89Sn0cTHW3iMkqTtQ5KcR1j57OcJO0FEb1vPvk2MXI5ZyAatUYE7YacbEzd
-rg02uIwx3FqNSkuSI79uz4hMdV5TPtuhxx9nTwj9aLUhXFeZ0mn2PVgVzEnnMoJb
-+znlsZDgzDlJqdaD744YGWh8Z3OEssB35KfzFcdOeO6yH8lmv2Zfznk7pNPT7LTb
-Lae9VgkCgYEA92p1qnAB3NtJtNcaW53i0S5WJgS1hxWKvUDx3lTB9s8X9fHpqL1a
-E94fDfWzp/hax6FefUKIvBOukPLQ6bYjTMiFoOHzVirghAIuIUoMI5VtLhwD1hKs
-Lr7l/dptMgKb1nZHyXoKHRBthsy3K4+udsPi8TzMvYElgEqyQIe/Rk0CgYEA86GL
-8HC6zLszzKERDPBxrboRmoFvVUCTQDhsfj1M8aR3nQ8V5LkdIJc7Wqm/Ggfk9QRf
-rJ8M2WUMlU5CNnCn/KCrKzCNZIReze3fV+HnKdbcXGLvgbHPrhnz8yYehUFG+RGq
-bVyDWRU94T38izy2s5qMYrMJWZEYyXncSPbfcPMCgYAtaXfxcZ+V5xYPQFARMtiX
-5nZfggvDoJuXgx0h3tK/N2HBfcaSdzbaYLG4gTmZggc/jwnl2dl5E++9oSPhUdIG
-3ONSFUbxsOsGr9PBvnKd8WZZyUCXAVRjPBzAzF+whzQNWCZy/5htnz9LN7YDI9s0
-5113Q96cheDZPFydZY0hHQKBgQDVbEhNukM5xCiNcu+f2SaMnLp9EjQ4h5g3IvaP
-5B16daw/Dw8LzcohWboqIxeAsze0GD/D1ZUJAEd0qBjC3g+a9BjefervCjKOzXng
-38mEUm+6EwVjJSQcjSmycEs+Sr/kwr/8i5WYvU32+jk4tFgMoC+o6tQe/Uesf68k
-z/dPVwKBgGbF7Vv1/3SmhlOy+zYyvJ0CrWtKxH9QP6tLIEgEpd8x7YTSuCH94yok
-kToMXYA3sWNPt22GbRDZ+rcp4c7HkDx6I6vpdP9aQEwJTp0EPy0sgWr2XwYmreIQ
-NFmkk8Itn9EY2R9VBaP7GLv5kvwxDdLAnmwGmzVtbmaVdxCaBwUk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 -----END RSA PRIVATE KEY-----
+subject=/C=US/O=AT&T Bell Laboratories/OU=Prototype Research CA
+issuer= /C=US/O=AT&T Bell Laboratories/OU=Prototype Research CA
+notBefore=950413210656Z
+notAfter =970412210656Z
+-----BEGIN X509 CERTIFICATE-----
+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=
+-----END X509 CERTIFICATE-----
+issuer= /C=AU/ST=Queensland/O=CryptSoft Pty Ltd/CN=Test PCA (1024 bit)
+subject=/C=AU/ST=Queensland/O=CryptSoft Pty Ltd/CN=Test CA (1024 bit)
+-----BEGIN CERTIFICATE-----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+-----END CERTIFICATE-----
+-----BEGIN RSA PRIVATE KEY-----
+MIICXQIBAAKBgQCju6PLddelT+nIMm07GQwmYa/eZ2JWbsmt2gotSCqM7asFp425
+gxSK4jqhhT62UPpqDBEwvQ+fYkVv3RV0r9ReuZGv12NoS4fXsQgqO17lHA7Od0Kd
+2yNwJjKh44MxPKDt2o8iQMyZE0zlHnEFNpsP4COLTDNC6ljEEu5bk8uPsQIDAQAB
+AoGAVZmpFZsDZfr0l2S9tLLwpjRWNOlKATQkno6q2WesT0eGLQufTciY+c8ypfU6
+hyio8r5iUl/VhhdjhAtKx1mRpiotftHo/eYf8rtsrnprOnWG0bWjLjtIoMbcxGn2
+J3bN6LJmbJMjDs0eJ3KnTu646F3nDUw2oGAwmpzKXA1KAP0CQQDRvQhxk2D3Pehs
+HvG665u2pB5ipYQngEFlZO7RHJZzJOZEWSLuuMqaF/7pTfA5jiBvWqCgJeCRRInL
+21ru4dlPAkEAx9jj7BgKn5TYnMoBSSe0afjsV9oApVpN1Nacb1YDtCwy+scp3++s
+nFxlv98wxIlSdpwMUn+AUWfjiWR7Tu/G/wJBAJ/KjwZIrFVxewP0x2ILYsTRYLzz
+MS4PDsO7FB+I0i7DbBOifXS2oNSpd3I0CNMwrxFnUHzynpbOStVfN3ZL5w0CQQCa
+pwFahxBRhkJKsxhjoFJBX9yl75JoY4Wvm5Tbo9ih6UJaRx3kqfkN14L2BKYcsZgb
+KY9vmDOYy6iNfjDeWTfJAkBkfPUb8oTJ/nSP5zN6sqGxSY4krc4xLxpRmxoJ8HL2
+XfhqXkTzbU13RX9JJ/NZ8vQN9Vm2NhxRGJocQkmcdVtJ
+-----END RSA PRIVATE KEY-----
+-----BEGIN X509 CERTIFICATE-----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+-----END X509 CERTIFICATE-----
+-----BEGIN X509 CERTIFICATE-----
+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+-----END X509 CERTIFICATE-----
+-----BEGIN CERTIFICATE-----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+-----END CERTIFICATE-----
+-----BEGIN CERTIFICATE-----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+-----END CERTIFICATE-----
+-----BEGIN CERTIFICATE-----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==
+-----END CERTIFICATE-----
+
+issuer= /C=AU/ST=Queensland/O=CryptSoft Pty Ltd/CN=Test PCA (1024 bit)
+subject=/C=AU/ST=Queensland/O=CryptSoft Pty Ltd/CN=Test PCA (1024 bit)
+-----BEGIN CERTIFICATE-----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+-----END CERTIFICATE-----
+-----BEGIN RSA PRIVATE KEY-----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+-----END RSA PRIVATE KEY-----
+subject=/C=US/O=RSA Data Security, Inc./OU=Commercial Certification Authority
+issuer= /C=US/O=RSA Data Security, Inc./OU=Commercial Certification Authority
+notBefore=941104185834Z
+notAfter =991103185834Z
+-----BEGIN X509 CERTIFICATE-----
+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+-----END X509 CERTIFICATE-----
+subject=/C=US/O=RSA Data Security, Inc./OU=Secure Server Certification Authority
+issuer= /C=US/O=RSA Data Security, Inc./OU=Secure Server Certification Authority
+notBefore=941109235417Z
+notAfter =991231235417Z
+-----BEGIN X509 CERTIFICATE-----
+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+-----END X509 CERTIFICATE-----
+subject=/C=ZA/SP=Western Cape/L=Cape Town/O=Thawte Consulting cc
+	/OU=Certification Services Division/CN=Thawte Server CA
+	/Email=server-certs@thawte.com
+issuer= /C=ZA/SP=Western Cape/L=Cape Town/O=Thawte Consulting cc
+	/OU=Certification Services Division/CN=Thawte Server CA
+	/Email=server-certs@thawte.com
+-----BEGIN CERTIFICATE-----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-----END CERTIFICATE-----
+
+-----BEGIN CERTIFICATE-----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+-----END CERTIFICATE-----
+Tims test GCI CA
+
+-----BEGIN CERTIFICATE-----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 
+-----END CERTIFICATE-----
+
+-----BEGIN CERTIFICATE-----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+-----END CERTIFICATE-----
+-----BEGIN CERTIFICATE-----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-----END CERTIFICATE-----
+
+ subject=/L=Internet/O=VeriSign, Inc./OU=VeriSign Class 2 CA - Individual Subscriber
+ issuer= /L=Internet/O=VeriSign, Inc./OU=VeriSign Class 2 CA - Individual Subscriber
+
+-----BEGIN CERTIFICATE-----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+-----END CERTIFICATE-----
+
+ subject=/C=US/O=VeriSign, Inc./OU=Class 3 Public Primary Certification Authority
+ issuer= /C=US/O=VeriSign, Inc./OU=Class 3 Public Primary Certification Authority
+-----BEGIN CERTIFICATE-----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+-----END CERTIFICATE-----
+ subject=/C=US/O=VeriSign, Inc./OU=Class 4 Public Primary Certification Authority
+ issuer= /C=US/O=VeriSign, Inc./OU=Class 4 Public Primary Certification Authority
+-----BEGIN CERTIFICATE-----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+-----END CERTIFICATE-----
--- a/apps/sess_id.c
+++ b/apps/sess_id.c
@@ -90,7 +90,6 @@ int MAIN(int, char **);
 int MAIN(int argc, char **argv)
 	{
 	SSL_SESSION *x=NULL;
-	X509 *peer = NULL;
 	int ret=1,i,num,badops=0;
 	BIO *out=NULL;
 	int informat,outformat;
@@ -164,17 +163,16 @@ bad:
 	ERR_load_crypto_strings();
 	x=load_sess_id(infile,informat);
 	if (x == NULL) { goto end; }
-	peer = SSL_SESSION_get0_peer(x);

 	if(context)
 	    {
-	    size_t ctx_len = strlen(context);
-	    if(ctx_len > SSL_MAX_SID_CTX_LENGTH)
+	    x->sid_ctx_length=strlen(context);
+	    if(x->sid_ctx_length > SSL_MAX_SID_CTX_LENGTH)
 		{
 		BIO_printf(bio_err,"Context too long\n");
 		goto end;
 		}
-	    SSL_SESSION_set1_id_context(x, (unsigned char *)context, ctx_len);
+	    memcpy(x->sid_ctx,context,x->sid_ctx_length);
 	    }

 #ifdef undef
@@ -233,10 +231,10 @@ bad:

 		if (cert)
 			{
-			if (peer == NULL)
+			if (x->peer == NULL)
 				BIO_puts(out,"No certificate present\n");
 			else
-				X509_print(out,peer);
+				X509_print(out,x->peer);
 			}
 		}

@@ -255,12 +253,12 @@ bad:
 			goto end;
 			}
 		}
-	else if (!noout && (peer != NULL)) /* just print the certificate */
+	else if (!noout && (x->peer != NULL)) /* just print the certificate */
 		{
 		if 	(outformat == FORMAT_ASN1)
-			i=(int)i2d_X509_bio(out,peer);
+			i=(int)i2d_X509_bio(out,x->peer);
 		else if (outformat == FORMAT_PEM)
-			i=PEM_write_bio_X509(out,peer);
+			i=PEM_write_bio_X509(out,x->peer);
 		else	{
 			BIO_printf(bio_err,"bad output format specified for outfile\n");
 			goto end;
--- a/apps/smime.c
+++ b/apps/smime.c
@@ -704,14 +704,6 @@ int MAIN(int argc, char **argv)
 			p7 = PKCS7_sign(NULL, NULL, other, in, flags);
 			if (!p7)
 				goto end;
-			if (flags & PKCS7_NOCERTS)
-				{
-				for (i = 0; i < sk_X509_num(other); i++)
-					{
-					X509 *x = sk_X509_value(other, i);
-					PKCS7_add_certificate(p7, x);
-					}
-				}
 			}
 		else
 			flags |= PKCS7_REUSE_DIGEST;
--- a/apps/speed.c
+++ b/apps/speed.c
@@ -108,14 +108,8 @@
 #include <signal.h>
 #endif

-#if defined(_WIN32) || defined(__CYGWIN__)
+#ifdef _WIN32
 #include <windows.h>
-# if defined(__CYGWIN__) && !defined(_WIN32)
-  /* <windows.h> should define _WIN32, which normally is mutually
-   * exclusive with __CYGWIN__, but if it didn't... */
-#  define _WIN32
-  /* this is done because Cygwin alarm() fails sometimes. */
-# endif
 #endif

 #include <openssl/bn.h>
@@ -189,25 +183,6 @@
 #ifndef OPENSSL_NO_ECDH
 #include <openssl/ecdh.h>
 #endif
-#include <openssl/modes.h>
-
-#ifdef OPENSSL_FIPS
-#ifdef OPENSSL_DOING_MAKEDEPEND
-#undef AES_set_encrypt_key
-#undef AES_set_decrypt_key
-#undef DES_set_key_unchecked
-#endif
-#define BF_set_key	private_BF_set_key
-#define CAST_set_key	private_CAST_set_key
-#define idea_set_encrypt_key	private_idea_set_encrypt_key
-#define SEED_set_key	private_SEED_set_key
-#define RC2_set_key	private_RC2_set_key
-#define RC4_set_key	private_RC4_set_key
-#define DES_set_key_unchecked	private_DES_set_key_unchecked
-#define AES_set_encrypt_key	private_AES_set_encrypt_key
-#define AES_set_decrypt_key	private_AES_set_decrypt_key
-#define Camellia_set_key	private_Camellia_set_key
-#endif

 #ifndef HAVE_FORK
 # if defined(OPENSSL_SYS_VMS) || defined(OPENSSL_SYS_WINDOWS) || defined(OPENSSL_SYS_MACINTOSH_CLASSIC) || defined(OPENSSL_SYS_OS2) || defined(OPENSSL_SYS_NETWARE)
@@ -239,7 +214,7 @@ static void print_result(int alg,int run_no,int count,double time_used);
 static int do_multi(int multi);
 #endif

-#define ALGOR_NUM	30
+#define ALGOR_NUM	29
 #define SIZE_NUM	5
 #define RSA_NUM		4
 #define DSA_NUM		3
@@ -254,7 +229,7 @@ static const char *names[ALGOR_NUM]={
  "aes-128 cbc","aes-192 cbc","aes-256 cbc",
  "camellia-128 cbc","camellia-192 cbc","camellia-256 cbc",
  "evp","sha256","sha512","whirlpool",
-  "aes-128 ige","aes-192 ige","aes-256 ige","ghash" };
+  "aes-128 ige","aes-192 ige","aes-256 ige"};
 static double results[ALGOR_NUM][SIZE_NUM];
 static int lengths[SIZE_NUM]={16,64,256,1024,8*1024};
 #ifndef OPENSSL_NO_RSA
@@ -298,12 +273,9 @@ static SIGRETTYPE sig_done(int sig)

 #if defined(_WIN32)

-#if !defined(SIGALRM)
-# define SIGALRM
-#endif
+#define SIGALRM
 static unsigned int lapse,schlock;
-static void alarm_win32(unsigned int secs) { lapse = secs*1000; }
-#define alarm alarm_win32
+static void alarm(unsigned int secs) { lapse = secs*1000; }

 static DWORD WINAPI sleepy(VOID *arg)
 	{
@@ -357,7 +329,6 @@ static void *KDF1_SHA1(const void *in, size_t inlen, void *out, size_t *outlen)
 	}
 #endif	/* OPENSSL_NO_ECDH */

-static void multiblock_speed(const EVP_CIPHER *evp_cipher);

 int MAIN(int, char **);

@@ -498,7 +469,6 @@ int MAIN(int argc, char **argv)
 #define D_IGE_128_AES   26
 #define D_IGE_192_AES   27
 #define D_IGE_256_AES   28
-#define D_GHASH		29
 	double d=0.0;
 	long c[ALGOR_NUM][SIZE_NUM];
 #define	R_DSA_512	0
@@ -630,7 +600,6 @@ int MAIN(int argc, char **argv)
 #ifndef NO_FORK
 	int multi=0;
 #endif
-	int multiblock=0;

 #ifndef TIMES
 	usertime=-1;
@@ -779,11 +748,6 @@ int MAIN(int argc, char **argv)
 			j--;	/* Otherwise, -mr gets confused with
 				   an algorithm. */
 			}
-		else if (argc > 0 && !strcmp(*argv,"-mb"))
-			{
-			multiblock=1;
-			j--;
-			}
 		else
 #ifndef OPENSSL_NO_MD2
 		if	(strcmp(*argv,"md2") == 0) doit[D_MD2]=1;
@@ -930,10 +894,6 @@ int MAIN(int argc, char **argv)
 			doit[D_CBC_192_AES]=1;
 			doit[D_CBC_256_AES]=1;
 			}
-		else if (strcmp(*argv,"ghash") == 0)
-			{
-			doit[D_GHASH]=1;
-			}
 		else
 #endif
 #ifndef OPENSSL_NO_CAMELLIA
@@ -1304,7 +1264,6 @@ int MAIN(int argc, char **argv)
 	c[D_IGE_128_AES][0]=count;
 	c[D_IGE_192_AES][0]=count;
 	c[D_IGE_256_AES][0]=count;
-	c[D_GHASH][0]=count;

 	for (i=1; i<SIZE_NUM; i++)
 		{
@@ -1499,7 +1458,7 @@ int MAIN(int argc, char **argv)
 # error "You cannot disable DES on systems without SIGALRM."
 #endif /* OPENSSL_NO_DES */
 #else
-#define COND(c)	(run && count<0x7fffffff)
+#define COND(c)	(run)
 #define COUNT(d) (count)
 #ifndef _WIN32
 	signal(SIGALRM,sig_done);
@@ -1795,22 +1754,7 @@ int MAIN(int argc, char **argv)
 			print_result(D_IGE_256_AES,j,count,d);
 			}
 		}
-	if (doit[D_GHASH])
-		{
-		GCM128_CONTEXT *ctx = CRYPTO_gcm128_new(&aes_ks1,(block128_f)AES_encrypt);
-		CRYPTO_gcm128_setiv (ctx,(unsigned char *)"0123456789ab",12);

-		for (j=0; j<SIZE_NUM; j++)
-			{
-			print_message(names[D_GHASH],c[D_GHASH][j],lengths[j]);
-			Time_F(START);
-			for (count=0,run=1; COND(c[D_GHASH][j]); count++)
-				CRYPTO_gcm128_aad(ctx,buf,lengths[j]);
-			d=Time_F(STOP);
-			print_result(D_GHASH,j,count,d);
-			}
-		CRYPTO_gcm128_release(ctx);
-		}

 #endif
 #ifndef OPENSSL_NO_CAMELLIA
@@ -1956,19 +1900,6 @@ int MAIN(int argc, char **argv)

 	if (doit[D_EVP])
 		{
-#ifdef EVP_CIPH_FLAG_TLS1_1_MULTIBLOCK
-		if (multiblock && evp_cipher)
-			{
-			if (!(EVP_CIPHER_flags(evp_cipher)&EVP_CIPH_FLAG_TLS1_1_MULTIBLOCK))
-				{
-				fprintf(stderr,"%s is not multi-block capable\n",OBJ_nid2ln(evp_cipher->nid));
-				goto end;
-				}
-			multiblock_speed(evp_cipher);
-			mret=0;
-			goto end;
-			}
-#endif
 		for (j=0; j<SIZE_NUM; j++)
 			{
 			if (evp_cipher)
@@ -2617,7 +2548,7 @@ static void pkey_print_message(const char *str, const char *str2, long num,
 	BIO_printf(bio_err,mr ? "+DTP:%d:%s:%s:%d\n"
 			   : "Doing %d bit %s %s's for %ds: ",bits,str,str2,tm);
 	(void)BIO_flush(bio_err);
-	alarm(tm);
+	alarm(RSA_SECONDS);
 #else
 	BIO_printf(bio_err,mr ? "+DNP:%ld:%d:%s:%s\n"
 			   : "Doing %ld %d bit %s %s's: ",num,bits,str,str2);
@@ -2859,109 +2790,4 @@ static int do_multi(int multi)
 	return 1;
 	}
 #endif
-
-static void multiblock_speed(const EVP_CIPHER *evp_cipher)
-	{
-	static int mblengths[]={8*1024,2*8*1024,4*8*1024,8*8*1024,8*16*1024};
-	int j,count,num=sizeof(lengths)/sizeof(lengths[0]);
-	const char *alg_name;
-	unsigned char *inp,*out,no_key[32],no_iv[16];
-	EVP_CIPHER_CTX ctx;
-	double d=0.0;
-
-	inp = OPENSSL_malloc(mblengths[num-1]);
-	out = OPENSSL_malloc(mblengths[num-1]+1024);
-
-	EVP_CIPHER_CTX_init(&ctx);
-	EVP_EncryptInit_ex(&ctx,evp_cipher,NULL,no_key,no_iv);
-	EVP_CIPHER_CTX_ctrl(&ctx,EVP_CTRL_AEAD_SET_MAC_KEY,sizeof(no_key),no_key);
-	alg_name=OBJ_nid2ln(evp_cipher->nid);
-
-	for (j=0; j<num; j++)
-		{
-		print_message(alg_name,0,mblengths[j]);
-		Time_F(START);
-		for (count=0,run=1; run && count<0x7fffffff; count++)
-			{
-			unsigned char aad[13];
-			EVP_CTRL_TLS1_1_MULTIBLOCK_PARAM mb_param;
-			size_t len = mblengths[j];
-			int packlen;
-
-			memset(aad,0,8);/* avoid uninitialized values */
-			aad[8] = 23;	/* SSL3_RT_APPLICATION_DATA */
-			aad[9] = 3;	/* version */
-			aad[10] = 2;
-			aad[11] = 0;	/* length */
-			aad[12] = 0;
-			mb_param.out = NULL;
-			mb_param.inp = aad;
-			mb_param.len = len;
-			mb_param.interleave = 8;
-
-			packlen=EVP_CIPHER_CTX_ctrl(&ctx,
-					EVP_CTRL_TLS1_1_MULTIBLOCK_AAD,
-					sizeof(mb_param),&mb_param);
-
-			if (packlen>0)
-				{
-				mb_param.out = out;
-				mb_param.inp = inp;
-				mb_param.len = len;
-				EVP_CIPHER_CTX_ctrl(&ctx,
-					EVP_CTRL_TLS1_1_MULTIBLOCK_ENCRYPT,
-					sizeof(mb_param),&mb_param);
-				}
-			else
-				{
-				int pad;
-
-				RAND_bytes(out,16);
-				len+=16;
-				aad[11] = len>>8;
-				aad[12] = len;
-				pad=EVP_CIPHER_CTX_ctrl(&ctx,
-					EVP_CTRL_AEAD_TLS1_AAD,13,aad);
-				EVP_Cipher(&ctx,out,inp,len+pad);
-				}
-			}
-		d=Time_F(STOP);
-		BIO_printf(bio_err,mr ? "+R:%d:%s:%f\n"
-			: "%d %s's in %.2fs\n",count,"evp",d);
-		results[D_EVP][j]=((double)count)/d*mblengths[j];
-		}
-
-	if (mr)
-		{
-		fprintf(stdout,"+H");
-		for (j=0; j<num; j++)
-			fprintf(stdout,":%d",mblengths[j]);
-		fprintf(stdout,"\n");
-		fprintf(stdout,"+F:%d:%s",D_EVP,alg_name);
-		for (j=0; j<num; j++)
-			fprintf(stdout,":%.2f",results[D_EVP][j]);
-		fprintf(stdout,"\n");
-		}
-	else
-		{
-		fprintf(stdout,"The 'numbers' are in 1000s of bytes per second processed.\n"); 
-		fprintf(stdout,"type                    ");
-		for (j=0;  j<num; j++)
-			fprintf(stdout,"%7d bytes",mblengths[j]);
-		fprintf(stdout,"\n");
-		fprintf(stdout,"%-24s",alg_name);
-
-		for (j=0; j<num; j++)
-			{
-			if (results[D_EVP][j] > 10000)
-				fprintf(stdout," %11.2fk",results[D_EVP][j]/1e3);
-			else
-				fprintf(stdout," %11.2f ",results[D_EVP][j]);
-			}
-		fprintf(stdout,"\n");
-		}
-
-	OPENSSL_free(inp);
-	OPENSSL_free(out);
-	}
 #endif
--- a/apps/srp.c
+++ b/apps/srp.c
@@ -1,756 +0,0 @@
-/* apps/srp.c */
-/* Written by Peter Sylvester (peter.sylvester@edelweb.fr)  
- * for the EdelKey project and contributed to the OpenSSL project 2004.
- */
-/* ====================================================================
- * Copyright (c) 2004 The OpenSSL Project.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer. 
- *
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- *
- * 3. All advertising materials mentioning features or use of this
- *    software must display the following acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit. (http://www.OpenSSL.org/)"
- *
- * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
- *    endorse or promote products derived from this software without
- *    prior written permission. For written permission, please contact
- *    licensing@OpenSSL.org.
- *
- * 5. Products derived from this software may not be called "OpenSSL"
- *    nor may "OpenSSL" appear in their names without prior written
- *    permission of the OpenSSL Project.
- *
- * 6. Redistributions of any form whatsoever must retain the following
- *    acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit (http://www.OpenSSL.org/)"
- *
- * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
- * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE OpenSSL PROJECT OR
- * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
- * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
- * OF THE POSSIBILITY OF SUCH DAMAGE.
- * ====================================================================
- *
- * This product includes cryptographic software written by Eric Young
- * (eay@cryptsoft.com).  This product includes software written by Tim
- * Hudson (tjh@cryptsoft.com).
- *
- */
-#include <openssl/opensslconf.h>
-
-#ifndef OPENSSL_NO_SRP
-#include <stdio.h>
-#include <stdlib.h>
-#include <string.h>
-#include <openssl/conf.h>
-#include <openssl/bio.h>
-#include <openssl/err.h>
-#include <openssl/txt_db.h>
-#include <openssl/buffer.h>
-#include <openssl/srp.h>
-
-#include "apps.h"
-
-#undef PROG
-#define PROG srp_main
-
-#define BASE_SECTION	"srp"
-#define CONFIG_FILE "openssl.cnf"
-
-#define ENV_RANDFILE		"RANDFILE"
-
-#define ENV_DATABASE		"srpvfile"
-#define ENV_DEFAULT_SRP		"default_srp"
-
-static char *srp_usage[]={
-"usage: srp [args] [user] \n",
-"\n",
-" -verbose        Talk alot while doing things\n",
-" -config file    A config file\n",
-" -name arg       The particular srp definition to use\n",
-" -srpvfile arg   The srp verifier file name\n",
-" -add            add an user and srp verifier\n",
-" -modify         modify the srp verifier of an existing user\n",
-" -delete         delete user from verifier file\n",
-" -list           list user\n",
-" -gn arg         g and N values to be used for new verifier\n",
-" -userinfo arg   additional info to be set for user\n",
-" -passin arg     input file pass phrase source\n",
-" -passout arg    output file pass phrase source\n",
-#ifndef OPENSSL_NO_ENGINE
-" -engine e         - use engine e, possibly a hardware device.\n",
-#endif
-NULL
-};
-
-#ifdef EFENCE
-extern int EF_PROTECT_FREE;
-extern int EF_PROTECT_BELOW;
-extern int EF_ALIGNMENT;
-#endif
-
-static CONF *conf=NULL;
-static char *section=NULL;
-
-#define VERBOSE if (verbose) 
-#define VVERBOSE if (verbose>1) 
-
-
-int MAIN(int, char **);
-
-static int get_index(CA_DB *db, char* id, char type)
-	{
-	char ** pp;
-	int i;
-	if (id == NULL) return -1;
-	if (type == DB_SRP_INDEX) 
-	for (i = 0; i < sk_OPENSSL_PSTRING_num(db->db->data); i++)
-		{
-		pp = sk_OPENSSL_PSTRING_value(db->db->data,i);
-		if (pp[DB_srptype][0] == DB_SRP_INDEX  && !strcmp(id,pp[DB_srpid])) 
-			return i;
-		}
-	else for (i = 0; i < sk_OPENSSL_PSTRING_num(db->db->data); i++)
-		{
-		pp = sk_OPENSSL_PSTRING_value(db->db->data,i);
-
-		if (pp[DB_srptype][0] != DB_SRP_INDEX && !strcmp(id,pp[DB_srpid])) 
-			return i;
-		}
-
-	return -1 ; 
-	}
-
-static void print_entry(CA_DB *db, BIO *bio, int indx, int verbose, char *s)
-	{
-	if (indx >= 0 && verbose)
-		{
-		int j;
-		char **pp = sk_OPENSSL_PSTRING_value(db->db->data, indx);
-		BIO_printf(bio, "%s \"%s\"\n", s, pp[DB_srpid]);
-		for (j = 0; j < DB_NUMBER; j++)
-			{
-			BIO_printf(bio_err,"  %d = \"%s\"\n", j, pp[j]);
-			}
-		}
-	}
-
-static void print_index(CA_DB *db, BIO *bio, int indexindex, int verbose)
-	{
-	print_entry(db, bio, indexindex, verbose, "g N entry") ;
-	}
-
-static void print_user(CA_DB *db, BIO *bio, int userindex, int verbose)
-	{
-	if (verbose > 0)
-		{
-		char **pp = sk_OPENSSL_PSTRING_value(db->db->data,userindex);
-
-		if (pp[DB_srptype][0] != 'I')
-			{
-			print_entry(db, bio, userindex, verbose, "User entry");
-			print_entry(db, bio, get_index(db, pp[DB_srpgN], 'I'), verbose, "g N entry");
-			}
-
-		}
-	}
-
-static int update_index(CA_DB *db, BIO *bio, char **row)
-	{
-	char ** irow;
-	int i;
-
-	if ((irow=(char **)OPENSSL_malloc(sizeof(char *)*(DB_NUMBER+1))) == NULL)
-		{
-		BIO_printf(bio_err,"Memory allocation failure\n");
-		return 0;
-		}
-
-	for (i=0; i<DB_NUMBER; i++)
-		{
-		irow[i]=row[i];
-		row[i]=NULL;
-		}
-	irow[DB_NUMBER]=NULL;
-
-	if (!TXT_DB_insert(db->db,irow))
-		{
-		BIO_printf(bio,"failed to update srpvfile\n");
-		BIO_printf(bio,"TXT_DB error number %ld\n",db->db->error);
-		OPENSSL_free(irow);
-		return 0;
-		}
-	return 1;
-	}
-
-static void lookup_fail(const char *name, char *tag)
-	{
-	BIO_printf(bio_err,"variable lookup failed for %s::%s\n",name,tag);
-	}
-
-
-static char *srp_verify_user(const char *user, const char *srp_verifier,
-			     char *srp_usersalt, const char *g, const char *N,
-			     const char *passin, BIO *bio, int verbose)
-	{
-	char password[1024];
-	PW_CB_DATA cb_tmp;
-	char *verifier = NULL;
-	char *gNid = NULL;
-
-	cb_tmp.prompt_info = user;
-	cb_tmp.password = passin;
-
- 	if (password_callback(password, 1024, 0, &cb_tmp) >0)
-		{
-		VERBOSE BIO_printf(bio,"Validating\n   user=\"%s\"\n srp_verifier=\"%s\"\n srp_usersalt=\"%s\"\n g=\"%s\"\n N=\"%s\"\n",user,srp_verifier,srp_usersalt, g, N);
-		BIO_printf(bio, "Pass %s\n", password);
-
-		if (!(gNid=SRP_create_verifier(user, password, &srp_usersalt, &verifier, N, g)))
-			{
-			BIO_printf(bio, "Internal error validating SRP verifier\n");
-			}
-		else
-			{
-			if (strcmp(verifier, srp_verifier))
-				gNid = NULL;
-			OPENSSL_free(verifier);
-			}
-		}
-	return gNid;
-	}
-
-static char *srp_create_user(char *user, char **srp_verifier,
-			     char **srp_usersalt, char *g, char *N,
-			     char *passout, BIO *bio, int verbose)
-	{
- 	char password[1024];
-        PW_CB_DATA cb_tmp;
-	char *gNid = NULL;
-	char *salt = NULL;
-        cb_tmp.prompt_info = user;
-        cb_tmp.password = passout;
-
-	if (password_callback(password,1024,1,&cb_tmp) >0)
-		{
-		VERBOSE BIO_printf(bio,"Creating\n user=\"%s\"\n g=\"%s\"\n N=\"%s\"\n",user,g,N);
-		if (!(gNid =SRP_create_verifier(user, password, &salt, srp_verifier, N, g)))
-			{
-			BIO_printf(bio,"Internal error creating SRP verifier\n");
-			}
-		else 
-			*srp_usersalt = salt;
-		VVERBOSE BIO_printf(bio,"gNid=%s salt =\"%s\"\n verifier =\"%s\"\n", gNid,salt, *srp_verifier);
-
-		}
-	return gNid;
-	}
-
-int MAIN(int argc, char **argv)
-	{
-	int add_user = 0;
-	int list_user= 0;
-	int delete_user= 0;
-	int modify_user= 0;
-	char * user = NULL;
-
-	char *passargin = NULL, *passargout = NULL;
-	char *passin = NULL, *passout = NULL;
-        char * gN = NULL;
-	int gNindex = -1;
-	char ** gNrow = NULL;
-	int maxgN = -1;
-
-	char * userinfo = NULL;
-
-	int badops=0;
-	int ret=1;
-	int errors=0;
-	int verbose=0;
-	int doupdatedb=0;
-	char *configfile=NULL;
-	char *dbfile=NULL;
-	CA_DB *db=NULL;
-	char **pp ;
-	int i;
-	long errorline = -1;
-	char *randfile=NULL;
-#ifndef OPENSSL_NO_ENGINE
-	char *engine = NULL;
-#endif
-	char *tofree=NULL;
-	DB_ATTR db_attr;
-
-#ifdef EFENCE
-EF_PROTECT_FREE=1;
-EF_PROTECT_BELOW=1;
-EF_ALIGNMENT=0;
-#endif
-
-	apps_startup();
-
-	conf = NULL;
-	section = NULL;
-
-	if (bio_err == NULL)
-		if ((bio_err=BIO_new(BIO_s_file())) != NULL)
-			BIO_set_fp(bio_err,stderr,BIO_NOCLOSE|BIO_FP_TEXT);
-
-	argc--;
-	argv++;
-	while (argc >= 1 && badops == 0)
-		{
-		if	(strcmp(*argv,"-verbose") == 0)
-			verbose++;
-		else if	(strcmp(*argv,"-config") == 0)
-			{
-			if (--argc < 1) goto bad;
-			configfile= *(++argv);
-			}
-		else if (strcmp(*argv,"-name") == 0)
-			{
-			if (--argc < 1) goto bad;
-			section= *(++argv);
-			}
-		else if	(strcmp(*argv,"-srpvfile") == 0)
-			{
-			if (--argc < 1) goto bad;
-			dbfile= *(++argv);
-			}
-		else if (strcmp(*argv,"-add") == 0)
-			add_user=1;
-		else if (strcmp(*argv,"-delete") == 0)
-			delete_user=1;
-		else if (strcmp(*argv,"-modify") == 0)
-			modify_user=1;
-		else if (strcmp(*argv,"-list") == 0)
-			list_user=1;
-		else if (strcmp(*argv,"-gn") == 0)
-			{
-			if (--argc < 1) goto bad;
-			gN= *(++argv);
-			}
-		else if (strcmp(*argv,"-userinfo") == 0)
-			{
-			if (--argc < 1) goto bad;
-			userinfo= *(++argv);
-			}
-		else if (strcmp(*argv,"-passin") == 0)
-			{
-			if (--argc < 1) goto bad;
-			passargin= *(++argv);
-			}
-		else if (strcmp(*argv,"-passout") == 0)
-			{
-			if (--argc < 1) goto bad;
-			passargout= *(++argv);
-			}
-#ifndef OPENSSL_NO_ENGINE
-		else if (strcmp(*argv,"-engine") == 0)
-			{
-			if (--argc < 1) goto bad;
-			engine= *(++argv);
-			}
-#endif
-
-		else if (**argv == '-')
-			{
-bad:
-			BIO_printf(bio_err,"unknown option %s\n",*argv);
-			badops=1;
-			break;
-			}
-		else 
-			break;
-	
-		argc--;
-		argv++;
-		}
-
-	if (dbfile && configfile)
-		{
-		BIO_printf(bio_err,"-dbfile and -configfile cannot be specified together.\n");
-		badops = 1;
-		}
-	if (add_user+delete_user+modify_user+list_user != 1)
-		{
-		BIO_printf(bio_err,"Exactly one of the options -add, -delete, -modify -list must be specified.\n");
-		badops = 1;
-		}
-	if (delete_user+modify_user+delete_user== 1 && argc <= 0)
-		{
-		BIO_printf(bio_err,"Need at least one user for options -add, -delete, -modify. \n");
-		badops = 1;
-		}
-	if ((passin || passout) && argc != 1 )
-		{
-		BIO_printf(bio_err,"-passin, -passout arguments only valid with one user.\n");
-		badops = 1;
-		}
-
-	if (badops)
-		{
-		for (pp=srp_usage; (*pp != NULL); pp++)
-			BIO_printf(bio_err,"%s",*pp);
-
-		BIO_printf(bio_err," -rand file%cfile%c...\n", LIST_SEPARATOR_CHAR, LIST_SEPARATOR_CHAR);
-		BIO_printf(bio_err,"                 load the file (or the files in the directory) into\n");
-		BIO_printf(bio_err,"                 the random number generator\n");
-		goto err;
-		}
-
-	ERR_load_crypto_strings();
-
-#ifndef OPENSSL_NO_ENGINE
-	setup_engine(bio_err, engine, 0);
-#endif
-
-	if(!app_passwd(bio_err, passargin, passargout, &passin, &passout))
-		{
-		BIO_printf(bio_err, "Error getting passwords\n");
-		goto err;
-		}
-
-        if (!dbfile)
-		{
-
-
-	/*****************************************************************/
-		tofree=NULL;
-		if (configfile == NULL) configfile = getenv("OPENSSL_CONF");
-		if (configfile == NULL) configfile = getenv("SSLEAY_CONF");
-		if (configfile == NULL)
-			{
-			const char *s=X509_get_default_cert_area();
-			size_t len;
-
-#ifdef OPENSSL_SYS_VMS
-			len = strlen(s)+sizeof(CONFIG_FILE);
-			tofree=OPENSSL_malloc(len);
-			strcpy(tofree,s);
-#else
-			len = strlen(s)+sizeof(CONFIG_FILE)+1;
-			tofree=OPENSSL_malloc(len);
-			BUF_strlcpy(tofree,s,len);
-			BUF_strlcat(tofree,"/",len);
-#endif
-			BUF_strlcat(tofree,CONFIG_FILE,len);
-			configfile=tofree;
-			}
-
-		VERBOSE BIO_printf(bio_err,"Using configuration from %s\n",configfile);
-		conf = NCONF_new(NULL);
-		if (NCONF_load(conf,configfile,&errorline) <= 0)
-			{
-			if (errorline <= 0)
-				BIO_printf(bio_err,"error loading the config file '%s'\n",
-					configfile);
-			else
-				BIO_printf(bio_err,"error on line %ld of config file '%s'\n"
-					,errorline,configfile);
-			goto err;
-			}
-		if(tofree)
-			{
-			OPENSSL_free(tofree);
-			tofree = NULL;
-			}
-
-		if (!load_config(bio_err, conf))
-			goto err;
-
-	/* Lets get the config section we are using */
-		if (section == NULL)
-			{
-			VERBOSE BIO_printf(bio_err,"trying to read " ENV_DEFAULT_SRP " in \" BASE_SECTION \"\n");
-
-			section=NCONF_get_string(conf,BASE_SECTION,ENV_DEFAULT_SRP);
-			if (section == NULL)
-				{
-				lookup_fail(BASE_SECTION,ENV_DEFAULT_SRP);
-				goto err;
-				}
-			}
-         
-		if (randfile == NULL && conf)
-	        	randfile = NCONF_get_string(conf, BASE_SECTION, "RANDFILE");
-
-	
-		VERBOSE BIO_printf(bio_err,"trying to read " ENV_DATABASE " in section \"%s\"\n",section);
-
-		if ((dbfile=NCONF_get_string(conf,section,ENV_DATABASE)) == NULL)
-			{
-			lookup_fail(section,ENV_DATABASE);
-			goto err;
-			}
-
-        	}
-	if (randfile == NULL)
-		ERR_clear_error();
-       	else 
-		app_RAND_load_file(randfile, bio_err, 0);
-
-	VERBOSE BIO_printf(bio_err,"Trying to read SRP verifier file \"%s\"\n",dbfile);
-
-	db = load_index(dbfile, &db_attr);
-	if (db == NULL) goto err;
-
-	/* Lets check some fields */
-	for (i = 0; i < sk_OPENSSL_PSTRING_num(db->db->data); i++)
-		{
-		pp = sk_OPENSSL_PSTRING_value(db->db->data, i);
-	
-		if (pp[DB_srptype][0] == DB_SRP_INDEX)
-			{
-			maxgN = i;
-			if (gNindex < 0 && gN != NULL && !strcmp(gN, pp[DB_srpid]))
-				gNindex = i;
-
-			print_index(db, bio_err, i, verbose > 1);
-			}
-		}
-	
-	VERBOSE BIO_printf(bio_err, "Database initialised\n");
-
-	if (gNindex >= 0)
-		{
-		gNrow = sk_OPENSSL_PSTRING_value(db->db->data,gNindex);
-		print_entry(db, bio_err, gNindex, verbose > 1, "Default g and N");
-		}
-	else if (maxgN > 0 && !SRP_get_default_gN(gN))
-		{
-		BIO_printf(bio_err, "No g and N value for index \"%s\"\n", gN);
-		goto err;
-		}
-	else
-		{
-		VERBOSE BIO_printf(bio_err, "Database has no g N information.\n");
-		gNrow = NULL;
-		}
-	
-
-	VVERBOSE BIO_printf(bio_err,"Starting user processing\n");
-
-	if (argc > 0)
-		user = *(argv++) ;
-
-	while (list_user || user)
-		{
-		int userindex = -1;
-		if (user) 
-			VVERBOSE BIO_printf(bio_err, "Processing user \"%s\"\n", user);
-		if ((userindex = get_index(db, user, 'U')) >= 0)
-			{
-			print_user(db, bio_err, userindex, (verbose > 0) || list_user);
-			}
-		
-		if (list_user)
-			{
-			if (user == NULL)
-				{
-				BIO_printf(bio_err,"List all users\n");
-
-				for (i = 0; i < sk_OPENSSL_PSTRING_num(db->db->data); i++)
-					{
-					print_user(db,bio_err, i, 1);
-					}
-				list_user = 0;
-				}
-			else if (userindex < 0)
-				{
-				BIO_printf(bio_err, "user \"%s\" does not exist, ignored. t\n",
-					   user);
-				errors++;
-				}
-			}
-		else if (add_user)
-			{
-			if (userindex >= 0)
-				{
-				/* reactivation of a new user */
-				char **row = sk_OPENSSL_PSTRING_value(db->db->data, userindex);
-				BIO_printf(bio_err, "user \"%s\" reactivated.\n", user);
-				row[DB_srptype][0] = 'V';
-
-				doupdatedb = 1;
-				}
-			else
-				{
-				char *row[DB_NUMBER] ; char *gNid;
-				row[DB_srpverifier] = NULL;
-				row[DB_srpsalt] = NULL;
-				row[DB_srpinfo] = NULL;
-				if (!(gNid = srp_create_user(user,&(row[DB_srpverifier]), &(row[DB_srpsalt]),gNrow?gNrow[DB_srpsalt]:gN,gNrow?gNrow[DB_srpverifier]:NULL, passout, bio_err,verbose)))
-					{
-						BIO_printf(bio_err, "Cannot create srp verifier for user \"%s\", operation abandoned .\n", user);
-						errors++;
-						goto err;
-					}
-				row[DB_srpid] = BUF_strdup(user);
-				row[DB_srptype] = BUF_strdup("v");
-				row[DB_srpgN] = BUF_strdup(gNid);
-
-				if (!row[DB_srpid] || !row[DB_srpgN] || !row[DB_srptype] || !row[DB_srpverifier] || !row[DB_srpsalt] ||
-					(userinfo && (!(row[DB_srpinfo] = BUF_strdup(userinfo)))) || 
-					!update_index(db, bio_err, row))
-					{
-					if (row[DB_srpid]) OPENSSL_free(row[DB_srpid]);
-					if (row[DB_srpgN]) OPENSSL_free(row[DB_srpgN]);
-					if (row[DB_srpinfo]) OPENSSL_free(row[DB_srpinfo]);
-					if (row[DB_srptype]) OPENSSL_free(row[DB_srptype]);
-					if (row[DB_srpverifier]) OPENSSL_free(row[DB_srpverifier]);
-					if (row[DB_srpsalt]) OPENSSL_free(row[DB_srpsalt]);
-					goto err;
-					}
-				doupdatedb = 1;
-				}
-			}
-		else if (modify_user)
-			{
-			if (userindex < 0)
-				{
-				BIO_printf(bio_err,"user \"%s\" does not exist, operation ignored.\n",user);
-				errors++;
-				}
-			else
-				{
-
-				char **row = sk_OPENSSL_PSTRING_value(db->db->data, userindex);
-				char type = row[DB_srptype][0];
-				if (type == 'v')
-					{
-					BIO_printf(bio_err,"user \"%s\" already updated, operation ignored.\n",user);
-					errors++;
-					}
-				else
-					{
-					char *gNid;
-
-					if (row[DB_srptype][0] == 'V')
-						{
-						int user_gN;
-						char **irow = NULL;
-						VERBOSE BIO_printf(bio_err,"Verifying password for user \"%s\"\n",user);
-						if ( (user_gN = get_index(db, row[DB_srpgN], DB_SRP_INDEX)) >= 0)
-							irow = (char **)sk_OPENSSL_PSTRING_value(db->db->data, userindex);
-
- 						if (!srp_verify_user(user, row[DB_srpverifier], row[DB_srpsalt], irow ? irow[DB_srpsalt] : row[DB_srpgN], irow ? irow[DB_srpverifier] : NULL, passin, bio_err, verbose))
-							{
-							BIO_printf(bio_err, "Invalid password for user \"%s\", operation abandoned.\n", user);
-							errors++;
-							goto err;
-							}
-						} 
-					VERBOSE BIO_printf(bio_err,"Password for user \"%s\" ok.\n",user);
-
-					if (!(gNid=srp_create_user(user,&(row[DB_srpverifier]), &(row[DB_srpsalt]),gNrow?gNrow[DB_srpsalt]:NULL, gNrow?gNrow[DB_srpverifier]:NULL, passout, bio_err,verbose)))
-						{
-						BIO_printf(bio_err, "Cannot create srp verifier for user \"%s\", operation abandoned.\n", user);
-						errors++;
-						goto err;
-						}
-
-					row[DB_srptype][0] = 'v';
-					row[DB_srpgN] = BUF_strdup(gNid);
- 
-					if (!row[DB_srpid] || !row[DB_srpgN] || !row[DB_srptype] || !row[DB_srpverifier] || !row[DB_srpsalt] ||
-						(userinfo && (!(row[DB_srpinfo] = BUF_strdup(userinfo)))))  
-						goto err;
-
-					doupdatedb = 1;
-					}
-				}
-			}
-		else if (delete_user)
-			{
-			if (userindex < 0)
-				{
-				BIO_printf(bio_err, "user \"%s\" does not exist, operation ignored. t\n", user);
-				errors++;
-				}
-			else
-				{
-				char **xpp = sk_OPENSSL_PSTRING_value(db->db->data,userindex);
-				BIO_printf(bio_err, "user \"%s\" revoked. t\n", user);
-
-				xpp[DB_srptype][0] = 'R';
-				
-				doupdatedb = 1;
-				}
-			}
-		if (--argc > 0)
-			user = *(argv++) ;
-		else
-			{
-			user = NULL;
-			list_user = 0;
-			}
-		}
-
-	VERBOSE BIO_printf(bio_err,"User procession done.\n");
-
-
-	if (doupdatedb)
-		{
-		/* Lets check some fields */
-		for (i = 0; i < sk_OPENSSL_PSTRING_num(db->db->data); i++)
-			{
-			pp = sk_OPENSSL_PSTRING_value(db->db->data,i);
-	
-			if (pp[DB_srptype][0] == 'v')
-				{
-				pp[DB_srptype][0] = 'V';
-				print_user(db, bio_err, i, verbose);
-				}
-			}
-
-		VERBOSE BIO_printf(bio_err, "Trying to update srpvfile.\n");
-		if (!save_index(dbfile, "new", db)) goto err;
-				
-		VERBOSE BIO_printf(bio_err, "Temporary srpvfile created.\n");
-		if (!rotate_index(dbfile, "new", "old")) goto err;
-
-		VERBOSE BIO_printf(bio_err, "srpvfile updated.\n");
-		}
-
-	ret = (errors != 0);
-err:
-	if (errors != 0)
-	VERBOSE BIO_printf(bio_err,"User errors %d.\n",errors);
-
-	VERBOSE BIO_printf(bio_err,"SRP terminating with code %d.\n",ret);
-	if(tofree)
-		OPENSSL_free(tofree);
-	if (ret) ERR_print_errors(bio_err);
-	if (randfile) app_RAND_write_file(randfile, bio_err);
-	if (conf) NCONF_free(conf);
-	if (db) free_index(db);
-
-	OBJ_cleanup();
-	apps_shutdown();
-	OPENSSL_EXIT(ret);
-	}
-
-
-
-#endif
-
--- a/apps/verify.c
+++ b/apps/verify.c
@@ -88,7 +88,6 @@ int MAIN(int argc, char **argv)
 	X509_STORE *cert_ctx=NULL;
 	X509_LOOKUP *lookup=NULL;
 	X509_VERIFY_PARAM *vpm = NULL;
-	int crl_download = 0;
 #ifndef OPENSSL_NO_ENGINE
 	char *engine=NULL;
 #endif
@@ -146,8 +145,6 @@ int MAIN(int argc, char **argv)
 				if (argc-- < 1) goto end;
 				crlfile= *(++argv);
 				}
-			else if (strcmp(*argv,"-crl_download") == 0)
-				crl_download = 1;
 #ifndef OPENSSL_NO_ENGINE
 			else if (strcmp(*argv,"-engine") == 0)
 				{
@@ -225,40 +222,25 @@ int MAIN(int argc, char **argv)
 			goto end;
 		}

-	ret = 0;
-
-	if (crl_download)
-		store_setup_crl_download(cert_ctx);
-	if (argc < 1)
-		{ 
-		if (1 != check(cert_ctx, NULL, untrusted, trusted, crls, e))
-			ret = -1;
-		}
+	if (argc < 1) check(cert_ctx, NULL, untrusted, trusted, crls, e);
 	else
-		{
 		for (i=0; i<argc; i++)
-			if (1 != check(cert_ctx,argv[i], untrusted, trusted, crls, e))
-				ret = -1;
-		}
-
+			check(cert_ctx,argv[i], untrusted, trusted, crls, e);
+	ret=0;
 end:
 	if (ret == 1) {
 		BIO_printf(bio_err,"usage: verify [-verbose] [-CApath path] [-CAfile file] [-purpose purpose] [-crl_check]");
-		BIO_printf(bio_err," [-attime timestamp]");
 #ifndef OPENSSL_NO_ENGINE
 		BIO_printf(bio_err," [-engine e]");
 #endif
 		BIO_printf(bio_err," cert1 cert2 ...\n");
-
 		BIO_printf(bio_err,"recognized usages:\n");
-		for(i = 0; i < X509_PURPOSE_get_count(); i++)
-			{
+		for(i = 0; i < X509_PURPOSE_get_count(); i++) {
 			X509_PURPOSE *ptmp;
 			ptmp = X509_PURPOSE_get0(i);
-			BIO_printf(bio_err, "\t%-10s\t%s\n",
-				   X509_PURPOSE_get0_sname(ptmp),
-				   X509_PURPOSE_get0_name(ptmp));
-			}
+			BIO_printf(bio_err, "\t%-10s\t%s\n", X509_PURPOSE_get0_sname(ptmp),
+								X509_PURPOSE_get0_name(ptmp));
+		}
 	}
 	if (vpm) X509_VERIFY_PARAM_free(vpm);
 	if (cert_ctx != NULL) X509_STORE_free(cert_ctx);
@@ -266,7 +248,7 @@ end:
 	sk_X509_pop_free(trusted, X509_free);
 	sk_X509_CRL_pop_free(crls, X509_CRL_free);
 	apps_shutdown();
-	OPENSSL_EXIT(ret < 0 ? 2 : ret);
+	OPENSSL_EXIT(ret);
 	}

 static int check(X509_STORE *ctx, char *file,
--- a/apps/x509.c
+++ b/apps/x509.c
@@ -150,9 +150,6 @@ static const char *x509_usage[]={
 " -engine e       - use engine e, possibly a hardware device.\n",
 #endif
 " -certopt arg    - various certificate text options\n",
-" -checkhost host - check certificate matches \"host\"\n",
-" -checkemail email - check certificate matches \"email\"\n",
-" -checkip ipaddr - check certificate matches \"ipaddr\"\n",
 NULL
 };

@@ -160,15 +157,11 @@ static int MS_CALLBACK callb(int ok, X509_STORE_CTX *ctx);
 static int sign (X509 *x, EVP_PKEY *pkey,int days,int clrext, const EVP_MD *digest,
 						CONF *conf, char *section);
 static int x509_certify (X509_STORE *ctx,char *CAfile,const EVP_MD *digest,
-			 X509 *x,X509 *xca,EVP_PKEY *pkey,
-			 STACK_OF(OPENSSL_STRING) *sigopts,
-			 char *serial, int create ,int days, int clrext,
-			 CONF *conf, char *section, ASN1_INTEGER *sno);
+			 X509 *x,X509 *xca,EVP_PKEY *pkey,char *serial,
+			 int create,int days, int clrext, CONF *conf, char *section,
+						ASN1_INTEGER *sno);
 static int purpose_print(BIO *bio, X509 *cert, X509_PURPOSE *pt);
 static int reqfile=0;
-#ifdef OPENSSL_SSL_DEBUG_BROKEN_PROTOCOL
-static int force_version=2;
-#endif

 int MAIN(int, char **);

@@ -179,17 +172,15 @@ int MAIN(int argc, char **argv)
 	X509_REQ *req=NULL;
 	X509 *x=NULL,*xca=NULL;
 	ASN1_OBJECT *objtmp;
-	STACK_OF(OPENSSL_STRING) *sigopts = NULL;
-	EVP_PKEY *Upkey=NULL,*CApkey=NULL, *fkey = NULL;
+	EVP_PKEY *Upkey=NULL,*CApkey=NULL;
 	ASN1_INTEGER *sno = NULL;
-	int i,num,badops=0, badsig=0;
+	int i,num,badops=0;
 	BIO *out=NULL;
 	BIO *STDout=NULL;
 	STACK_OF(ASN1_OBJECT) *trust = NULL, *reject = NULL;
 	int informat,outformat,keyformat,CAformat,CAkeyformat;
 	char *infile=NULL,*outfile=NULL,*keyfile=NULL,*CAfile=NULL;
 	char *CAkeyfile=NULL,*CAserial=NULL;
-	char *fkeyfile=NULL;
 	char *alias=NULL;
 	int text=0,serial=0,subject=0,issuer=0,startdate=0,enddate=0;
 	int next_serial=0;
@@ -214,9 +205,6 @@ int MAIN(int argc, char **argv)
 	int need_rand = 0;
 	int checkend=0,checkoffset=0;
 	unsigned long nmflag = 0, certflag = 0;
-	char *checkhost = NULL;
-	char *checkemail = NULL;
-	char *checkip = NULL;
 #ifndef OPENSSL_NO_ENGINE
 	char *engine=NULL;
 #endif
@@ -283,29 +271,13 @@ int MAIN(int argc, char **argv)
 			if (--argc < 1) goto bad;
 			CAkeyformat=str2fmt(*(++argv));
 			}
-		else if (strcmp(*argv,"-sigopt") == 0)
-			{
-			if (--argc < 1)
-				goto bad;
-			if (!sigopts)
-				sigopts = sk_OPENSSL_STRING_new_null();
-			if (!sigopts || !sk_OPENSSL_STRING_push(sigopts, *(++argv)))
-				goto bad;
-			}
-#ifdef OPENSSL_SSL_DEBUG_BROKEN_PROTOCOL
-		else if (strcmp(*argv,"-force_version") == 0)
-			{
-			if (--argc < 1) goto bad;
-			force_version=atoi(*(++argv)) - 1;
-			}
-#endif
 		else if (strcmp(*argv,"-days") == 0)
 			{
 			if (--argc < 1) goto bad;
 			days=atoi(*(++argv));
 			if (days == 0)
 				{
-				BIO_printf(bio_err,"bad number of days\n");
+				BIO_printf(STDout,"bad number of days\n");
 				goto bad;
 				}
 			}
@@ -364,11 +336,6 @@ int MAIN(int argc, char **argv)
 			if (!(sno = s2i_ASN1_INTEGER(NULL, *(++argv))))
 				goto bad;
 			}
-		else if (strcmp(*argv,"-force_pubkey") == 0)
-			{
-			if (--argc < 1) goto bad;
-			fkeyfile= *(++argv);
-			}
 		else if (strcmp(*argv,"-addtrust") == 0)
 			{
 			if (--argc < 1) goto bad;
@@ -472,21 +439,6 @@ int MAIN(int argc, char **argv)
 			checkoffset=atoi(*(++argv));
 			checkend=1;
 			}
-		else if (strcmp(*argv,"-checkhost") == 0)
-			{
-			if (--argc < 1) goto bad;
-			checkhost=*(++argv);
-			}
-		else if (strcmp(*argv,"-checkemail") == 0)
-			{
-			if (--argc < 1) goto bad;
-			checkemail=*(++argv);
-			}
-		else if (strcmp(*argv,"-checkip") == 0)
-			{
-			if (--argc < 1) goto bad;
-			checkip=*(++argv);
-			}
 		else if (strcmp(*argv,"-noout") == 0)
 			noout= ++num;
 		else if (strcmp(*argv,"-trustout") == 0)
@@ -510,8 +462,6 @@ int MAIN(int argc, char **argv)
 #endif
 		else if (strcmp(*argv,"-ocspid") == 0)
 			ocspid= ++num;
-		else if (strcmp(*argv,"-badsig") == 0)
-			badsig = 1;
 		else if ((md_alg=EVP_get_digestbyname(*argv + 1)))
 			{
 			/* ok */
@@ -556,13 +506,6 @@ bad:
 		goto end;
 		}

-	if (fkeyfile)
-		{
-		fkey = load_pubkey(bio_err, fkeyfile, keyformat, 0,
-						NULL, e, "Forced key");
-		if (fkey == NULL) goto end;
-		}
-
 	if ((CAkeyfile == NULL) && (CA_flag) && (CAformat == FORMAT_PEM))
 		{ CAkeyfile=CAfile; }
 	else if ((CA_flag) && (CAkeyfile == NULL))
@@ -699,14 +642,10 @@ bad:

 		X509_gmtime_adj(X509_get_notBefore(x),0);
 	        X509_time_adj_ex(X509_get_notAfter(x),days, 0, NULL);
-		if (fkey)
-			X509_set_pubkey(x, fkey);
-		else
-			{
-			pkey = X509_REQ_get_pubkey(req);
-			X509_set_pubkey(x,pkey);
-			EVP_PKEY_free(pkey);
-			}
+
+		pkey = X509_REQ_get_pubkey(req);
+		X509_set_pubkey(x,pkey);
+		EVP_PKEY_free(pkey);
 		}
 	else
 		x=load_cert(bio_err,infile,informat,NULL,e,"Certificate");
@@ -962,7 +901,7 @@ bad:
 				}
 			else if (text == i)
 				{
-				X509_print_ex(STDout,x,nmflag, certflag);
+				X509_print_ex(out,x,nmflag, certflag);
 				}
 			else if (startdate == i)
 				{
@@ -1031,8 +970,7 @@ bad:
 				
 				assert(need_rand);
 				if (!x509_certify(ctx,CAfile,digest,x,xca,
-					CApkey, sigopts,
-					CAserial,CA_createserial,days, clrext,
+					CApkey, CAserial,CA_createserial,days, clrext,
 					extconf, extsect, sno))
 					goto end;
 				}
@@ -1094,17 +1032,12 @@ bad:
 		goto end;
 		}

-	print_cert_checks(STDout, x, checkhost, checkemail, checkip);
-
 	if (noout)
 		{
 		ret=0;
 		goto end;
 		}

-	if (badsig)
-		x->signature->data[x->signature->length - 1] ^= 0x1;
-
 	if 	(outformat == FORMAT_ASN1)
 		i=i2d_X509_bio(out,x);
 	else if (outformat == FORMAT_PEM)
@@ -1148,9 +1081,6 @@ end:
 	X509_free(xca);
 	EVP_PKEY_free(Upkey);
 	EVP_PKEY_free(CApkey);
-	EVP_PKEY_free(fkey);
-	if (sigopts)
-		sk_OPENSSL_STRING_free(sigopts);
 	X509_REQ_free(rq);
 	ASN1_INTEGER_free(sno);
 	sk_ASN1_OBJECT_pop_free(trust, ASN1_OBJECT_free);
@@ -1201,11 +1131,8 @@ static ASN1_INTEGER *x509_load_serial(char *CAfile, char *serialfile, int create
 	}

 static int x509_certify(X509_STORE *ctx, char *CAfile, const EVP_MD *digest,
-	     		X509 *x, X509 *xca, EVP_PKEY *pkey,
-			STACK_OF(OPENSSL_STRING) *sigopts,
-	  		char *serialfile, int create,
-	     		int days, int clrext, CONF *conf, char *section,
-			ASN1_INTEGER *sno)
+	     X509 *x, X509 *xca, EVP_PKEY *pkey, char *serialfile, int create,
+	     int days, int clrext, CONF *conf, char *section, ASN1_INTEGER *sno)
 	{
 	int ret=0;
 	ASN1_INTEGER *bs=NULL;
@@ -1258,18 +1185,13 @@ static int x509_certify(X509_STORE *ctx, char *CAfile, const EVP_MD *digest,
 	if (conf)
 		{
 		X509V3_CTX ctx2;
-#ifdef OPENSSL_SSL_DEBUG_BROKEN_PROTOCOL
-		X509_set_version(x, force_version);
-#else
 		X509_set_version(x,2); /* version 3 certificate */
-#endif
                X509V3_set_ctx(&ctx2, xca, x, NULL, NULL, 0);
                X509V3_set_nconf(&ctx2, conf);
                if (!X509V3_EXT_add_nconf(conf, &ctx2, section, x)) goto end;
 		}

-	if (!do_X509_sign(bio_err, x, pkey, digest, sigopts))
-		goto end;
+	if (!X509_sign(x,pkey,digest)) goto end;
 	ret=1;
 end:
 	X509_STORE_CTX_cleanup(&xsc);
@@ -1340,11 +1262,7 @@ static int sign(X509 *x, EVP_PKEY *pkey, int days, int clrext, const EVP_MD *dig
 	if (conf)
 		{
 		X509V3_CTX ctx;
-#ifdef OPENSSL_SSL_DEBUG_BROKEN_PROTOCOL
-		X509_set_version(x, force_version);
-#else
 		X509_set_version(x,2); /* version 3 certificate */
-#endif
                X509V3_set_ctx(&ctx, x, x, NULL, NULL, 0);
                X509V3_set_nconf(&ctx, conf);
                if (!X509V3_EXT_add_nconf(conf, &ctx, section, x)) goto err;
--- a/121
+++ b/121
@@ -370,10 +370,6 @@ case "${SYSTEM}:${RELEASE}:${VERSION}:${MACHINE}" in
    NONSTOP_KERNEL*)
       echo "nsr-tandem-nsk"; exit 0;
       ;;
-
-    vxworks*)
-       echo "${MACHINE}-whatever-vxworks"; exit 0;
-       ;;
 esac

 #
@@ -411,18 +407,23 @@ exit 0
 # this is where the translation occurs into SSLeay terms
 # ---------------------------------------------------------------------------

+GCCVER=`(gcc -dumpversion) 2>/dev/null`
+if [ "$GCCVER" != "" ]; then
+  # then strip off whatever prefix egcs prepends the number with...
+  # Hopefully, this will work for any future prefixes as well.
+  GCCVER=`echo $GCCVER | LC_ALL=C sed 's/^[a-zA-Z]*\-//'`
+  # Since gcc 3.1 gcc --version behaviour has changed.  gcc -dumpversion
+  # does give us what we want though, so we use that.  We just just the
+  # major and minor version numbers.
+  # peak single digit before and after first dot, e.g. 2.95.1 gives 29
+  GCCVER=`echo $GCCVER | sed 's/\([0-9]\)\.\([0-9]\).*/\1\2/'`
+fi
+
 # Only set CC if not supplied already
-if [ -z "$CROSS_COMPILE$CC" ]; then
-  GCCVER=`sh -c "gcc -dumpversion" 2>/dev/null`
+if [ -z "$CC" ]; then
+# figure out if gcc is available and if so we use it otherwise
+# we fallback to whatever cc does on the system
  if [ "$GCCVER" != "" ]; then
-    # then strip off whatever prefix egcs prepends the number with...
-    # Hopefully, this will work for any future prefixes as well.
-    GCCVER=`echo $GCCVER | LC_ALL=C sed 's/^[a-zA-Z]*\-//'`
-    # Since gcc 3.1 gcc --version behaviour has changed.  gcc -dumpversion
-    # does give us what we want though, so we use that.  We just just the
-    # major and minor version numbers.
-    # peak single digit before and after first dot, e.g. 2.95.1 gives 29
-    GCCVER=`echo $GCCVER | sed 's/\([0-9]\)\.\([0-9]\).*/\1\2/'`
    CC=gcc
  else
    CC=cc
@@ -538,7 +539,7 @@ case "$GUESSOS" in
  ppc-apple-rhapsody) OUT="rhapsody-ppc-cc" ;;
  ppc-apple-darwin*)
 	ISA64=`(sysctl -n hw.optional.64bitops) 2>/dev/null`
-	if [ "$ISA64" = "1" -a -z "$KERNEL_BITS" ]; then
+	if [ "$ISA64" = "1" ]; then
 	    echo "WARNING! If you wish to build 64-bit library, then you have to"
 	    echo "         invoke './Configure darwin64-ppc-cc' *manually*."
 	    if [ "$TEST" = "false" -a -t 1 ]; then
@@ -546,14 +547,10 @@ case "$GUESSOS" in
 	      (trap "stty `stty -g`" 2 0; stty -icanon min 0 time 50; read waste) <&1
 	    fi
 	fi
-	if [ "$ISA64" = "1" -a "$KERNEL_BITS" = "64" ]; then
-	    OUT="darwin64-ppc-cc"
-	else
-	    OUT="darwin-ppc-cc"
-	fi ;;
+	OUT="darwin-ppc-cc" ;;
  i?86-apple-darwin*)
 	ISA64=`(sysctl -n hw.optional.x86_64) 2>/dev/null`
-	if [ "$ISA64" = "1" -a -z "$KERNEL_BITS" ]; then
+	if [ "$ISA64" = "1" ]; then
 	    echo "WARNING! If you wish to build 64-bit library, then you have to"
 	    echo "         invoke './Configure darwin64-x86_64-cc' *manually*."
 	    if [ "$TEST" = "false" -a -t 1 ]; then
@@ -561,17 +558,7 @@ case "$GUESSOS" in
 	      (trap "stty `stty -g`" 2 0; stty -icanon min 0 time 50; read waste) <&1
 	    fi
 	fi
-	if [ "$ISA64" = "1" -a "$KERNEL_BITS" = "64" ]; then
-	    OUT="darwin64-x86_64-cc"
-	else
-	    OUT="darwin-i386-cc"
-	fi ;;
-  armv6+7-*-iphoneos)
-	options="$options -arch%20armv6 -arch%20armv7"
-	OUT="iphoneos-cross" ;;
-  *-*-iphoneos)
-	options="$options -arch%20${MACHINE}"
-	OUT="iphoneos-cross" ;;
+	OUT="darwin-i386-cc" ;;
  alpha-*-linux2)
        ISA=`awk '/cpu model/{print$4;exit(0);}' /proc/cpuinfo`
 	case ${ISA:-generic} in
@@ -587,38 +574,15 @@ case "$GUESSOS" in
 	fi
 	;;
  ppc64-*-linux2)
-	if [ -z "$KERNEL_BITS" ]; then
-	    echo "WARNING! If you wish to build 64-bit library, then you have to"
-	    echo "         invoke './Configure linux-ppc64' *manually*."
-	    if [ "$TEST" = "false" -a -t 1 ]; then
-		echo "         You have about 5 seconds to press Ctrl-C to abort."
-		(trap "stty `stty -g`" 2 0; stty -icanon min 0 time 50; read waste) <&1
-	    fi
-	fi
-	if [ "$KERNEL_BITS" = "64" ]; then
-	    OUT="linux-ppc64"
-	else
-	    OUT="linux-ppc"
-	    (echo "__LP64__" | gcc -E -x c - 2>/dev/null | grep "^__LP64__" 2>&1 > /dev/null) || options="$options -m32"
-	fi
-	;;
-  ppc64le-*-linux2) OUT="linux-ppc64le" ;;
-  ppc-*-linux2) OUT="linux-ppc" ;;
-  mips64*-*-linux2)
 	echo "WARNING! If you wish to build 64-bit library, then you have to"
-	echo "         invoke './Configure linux64-mips64' *manually*."
+	echo "         invoke './Configure linux-ppc64' *manually*."
 	if [ "$TEST" = "false" -a -t 1 ]; then
 	    echo "         You have about 5 seconds to press Ctrl-C to abort."
 	    (trap "stty `stty -g`" 2 0; stty -icanon min 0 time 50; read waste) <&1
 	fi
-	OUT="linux-mips64"
+	OUT="linux-ppc"
 	;;
-  mips*-*-linux2) OUT="linux-mips32" ;;
-  ppc60x-*-vxworks*) OUT="vxworks-ppc60x" ;;
-  ppcgen-*-vxworks*) OUT="vxworks-ppcgen" ;;
-  pentium-*-vxworks*) OUT="vxworks-pentium" ;;
-  simlinux-*-vxworks*) OUT="vxworks-simlinux" ;;
-  mips-*-vxworks*) OUT="vxworks-mips";;
+  ppc-*-linux2) OUT="linux-ppc" ;;
  ia64-*-linux?) OUT="linux-ia64" ;;
  sparc64-*-linux2)
 	echo "WARNING! If you *know* that your GNU C supports 64-bit/V9 ABI"
@@ -660,25 +624,12 @@ case "$GUESSOS" in
 	options="$options -DB_ENDIAN -mschedule=$CPUSCHEDULE -march=$CPUARCH"
 	OUT="linux-generic32" ;;
  armv[1-3]*-*-linux2) OUT="linux-generic32" ;;
-  armv[7-9]*-*-linux2) OUT="linux-armv4"; options="$options -march=armv7-a" ;;
  arm*-*-linux2) OUT="linux-armv4" ;;
-  aarch64-*-linux2) OUT="linux-aarch64" ;;
  sh*b-*-linux2) OUT="linux-generic32"; options="$options -DB_ENDIAN" ;;
  sh*-*-linux2)  OUT="linux-generic32"; options="$options -DL_ENDIAN" ;;
  m68k*-*-linux2) OUT="linux-generic32"; options="$options -DB_ENDIAN" ;;
  s390-*-linux2) OUT="linux-generic32"; options="$options -DB_ENDIAN" ;;
-  s390x-*-linux2)
-	# To be uncommented when glibc bug is fixed, see Configure...
-	#if egrep -e '^features.* highgprs' /proc/cpuinfo >/dev/null ; then
-	#  echo "WARNING! If you wish to build \"highgprs\" 32-bit library, then you"
-	#  echo "         have to invoke './Configure linux32-s390x' *manually*."
-	#  if [ "$TEST" = "false" -a -t -1 ]; then
-	#    echo "         You have about 5 seconds to press Ctrl-C to abort."
-	#    (trap "stty `stty -g`" 2 0; stty -icanon min 0 time 50; read waste) <&1
-	#  fi
-	#fi
-	OUT="linux64-s390x"
-	;;
+  s390x-*-linux2) OUT="linux-s390x" ;;
  x86_64-*-linux?) OUT="linux-x86_64" ;;
  *86-*-linux2) OUT="linux-elf"
 	if [ "$GCCVER" -gt 28 ]; then
@@ -697,7 +648,7 @@ case "$GUESSOS" in
  sun4[uv]*-*-solaris2)
 	OUT="solaris-sparcv9-$CC"
 	ISA64=`(isalist) 2>/dev/null | grep sparcv9`
-	if [ "$ISA64" != "" -a "$KERNEL_BITS" = "" ]; then
+	if [ "$ISA64" != "" ]; then
 	    if [ "$CC" = "cc" -a $CCVER -ge 50 ]; then
 		echo "WARNING! If you wish to build 64-bit library, then you have to"
 		echo "         invoke './Configure solaris64-sparcv9-cc' *manually*."
@@ -727,16 +678,13 @@ case "$GUESSOS" in
 		fi
 	    fi
 	fi
-	if [ "$ISA64" != "" -a "$KERNEL_BITS" = "64" ]; then
-	    OUT="solaris64-sparcv9-$CC"
-	fi
 	;;
  sun4m-*-solaris2)	OUT="solaris-sparcv8-$CC" ;;
  sun4d-*-solaris2)	OUT="solaris-sparcv8-$CC" ;;
  sun4*-*-solaris2)	OUT="solaris-sparcv7-$CC" ;;
  *86*-*-solaris2)
 	ISA64=`(isalist) 2>/dev/null | grep amd64`
-	if [ "$ISA64" != "" -a ${KERNEL_BITS:-64} -eq 64 ]; then
+	if [ "$ISA64" != "" ]; then
 	    OUT="solaris64-x86_64-$CC"
 	else
 	    OUT="solaris-x86-$CC"
@@ -788,17 +736,20 @@ case "$GUESSOS" in
 	if [ $CC = "gcc" -a $GCC_BITS = "64" ]; then
 	    OUT="hpux64-parisc2-gcc"
 	fi
-	[ "$KERNEL_BITS" ] || KERNEL_BITS=`(getconf KERNEL_BITS) 2>/dev/null`
+	KERNEL_BITS=`(getconf KERNEL_BITS) 2>/dev/null`
 	KERNEL_BITS=${KERNEL_BITS:-32}
 	CPU_VERSION=`(getconf CPU_VERSION) 2>/dev/null`
 	CPU_VERSION=${CPU_VERSION:-0}
 	# See <sys/unistd.h> for further info on CPU_VERSION.
 	if   [ $CPU_VERSION -ge 768 ]; then	# IA-64 CPU
-	     if [ $KERNEL_BITS -eq 64 -a "$CC" = "cc" ]; then
-	        OUT="hpux64-ia64-cc"
-             else
-	        OUT="hpux-ia64-cc"
-             fi
+	     echo "WARNING! 64-bit ABI is the default configured ABI on HP-UXi."
+	     echo "         If you wish to build 32-bit library, the you have to"
+	     echo "         invoke './Configure hpux-ia64-cc' *manually*."
+	     if [ "$TEST" = "false" -a -t 1 ]; then
+		echo "         You have about 5 seconds to press Ctrl-C to abort."
+		(trap "stty `stty -g`" 2 0; stty -icanon min 0 time 50; read waste) <&1
+	     fi
+	     OUT="hpux64-ia64-cc"
 	elif [ $CPU_VERSION -ge 532 ]; then	# PA-RISC 2.x CPU
 	     OUT=${OUT:-"hpux-parisc2-${CC}"}
 	     if [ $KERNEL_BITS -eq 64 -a "$CC" = "cc" ]; then
@@ -819,7 +770,7 @@ case "$GUESSOS" in
 	options="$options -D_REENTRANT" ;;
  *-hpux)	OUT="hpux-parisc-$CC" ;;
  *-aix)
-	[ "$KERNEL_BITS" ] || KERNEL_BITS=`(getconf KERNEL_BITMODE) 2>/dev/null`
+	KERNEL_BITS=`(getconf KERNEL_BITMODE) 2>/dev/null`
 	KERNEL_BITS=${KERNEL_BITS:-32}
 	OBJECT_MODE=${OBJECT_MODE:-32}
 	if [ "$CC" = "gcc" ]; then
@@ -859,8 +810,6 @@ case "$GUESSOS" in
  beos-*) OUT="$GUESSOS" ;;
  x86pc-*-qnx6) OUT="QNX6-i386" ;;
  *-*-qnx6) OUT="QNX6" ;;
-  x86-*-android|i?86-*-android) OUT="android-x86" ;;
-  armv[7-9]*-*-android) OUT="android-armv7" ;;
  *) OUT=`echo $GUESSOS | awk -F- '{print $3}'`;;
 esac

--- a/crypto/Makefile
+++ b/crypto/Makefile
@@ -7,7 +7,7 @@ TOP=		..
 CC=		cc
 INCLUDE=	-I. -I$(TOP) -I../include $(ZLIB_INCLUDE)
 # INCLUDES targets sudbirs!
-INCLUDES=	-I.. -I../.. -I../modes -I../asn1 -I../evp -I../../include $(ZLIB_INCLUDE)
+INCLUDES=	-I.. -I../.. -I../asn1 -I../evp -I../../include $(ZLIB_INCLUDE)
 CFLAG=		-g
 MAKEDEPPROG=	makedepend
 MAKEDEPEND=	$(TOP)/util/domd $(TOP) -MD $(MAKEDEPPROG)
@@ -35,10 +35,8 @@ TEST=constant_time_test.c

 LIB= $(TOP)/libcrypto.a
 SHARED_LIB= libcrypto$(SHLIB_EXT)
-LIBSRC=	cryptlib.c mem.c mem_clr.c mem_dbg.c cversion.c ex_data.c cpt_err.c \
-	ebcdic.c uid.c o_time.c o_str.c o_dir.c o_fips.c o_init.c fips_ers.c
-LIBOBJ= cryptlib.o mem.o mem_dbg.o cversion.o ex_data.o cpt_err.o ebcdic.o \
-	uid.o o_time.o o_str.o o_dir.o o_fips.o o_init.o fips_ers.o $(CPUID_OBJ)
+LIBSRC=	cryptlib.c mem.c mem_clr.c mem_dbg.c cversion.c ex_data.c cpt_err.c ebcdic.c uid.c o_time.c o_str.c o_dir.c
+LIBOBJ= cryptlib.o mem.o mem_dbg.o cversion.o ex_data.o cpt_err.o ebcdic.o uid.o o_time.o o_str.o o_dir.o $(CPUID_OBJ)

 SRC= $(LIBSRC)

@@ -71,17 +69,16 @@ applink.o:	$(TOP)/ms/applink.c
 uplink.o:	$(TOP)/ms/uplink.c applink.o
 	$(CC) $(CFLAGS) -c -o $@ $(TOP)/ms/uplink.c

-uplink-x86.s:	$(TOP)/ms/uplink-x86.pl
-	$(PERL) $(TOP)/ms/uplink-x86.pl $(PERLASM_SCHEME) > $@
+uplink-cof.s:	$(TOP)/ms/uplink.pl
+	$(PERL) $(TOP)/ms/uplink.pl coff > $@

-x86_64cpuid.s: x86_64cpuid.pl;	$(PERL) x86_64cpuid.pl $(PERLASM_SCHEME) > $@
-ia64cpuid.s: ia64cpuid.S;	$(CC) $(CFLAGS) -E ia64cpuid.S > $@
+x86_64cpuid.s: x86_64cpuid.pl
+	$(PERL) x86_64cpuid.pl $(PERLASM_SCHEME) > $@
+ia64cpuid.s: ia64cpuid.S
+	$(CC) $(CFLAGS) -E ia64cpuid.S > $@
 ppccpuid.s:	ppccpuid.pl;	$(PERL) ppccpuid.pl $(PERLASM_SCHEME) $@
-pariscid.s:	pariscid.pl;	$(PERL) pariscid.pl $(PERLASM_SCHEME) $@
 alphacpuid.s:	alphacpuid.pl
-	(preproc=$$$$.$@.S; trap "rm $$preproc" INT; \
-	$(PERL) alphacpuid.pl > $$preproc && \
-	$(CC) -E -P $$preproc > $@ && rm $$preproc)
+	$(PERL) $< | $(CC) -E - | tee $@ > /dev/null

 testapps:
 	[ -z "$(THIS)" ] || (	if echo $(SDIRS) | fgrep ' des '; \
@@ -93,7 +90,7 @@ subdirs:
 	@target=all; $(RECURSIVE_MAKE)

 files:
-	$(PERL) $(TOP)/util/files.pl "CPUID_OBJ=$(CPUID_OBJ)" Makefile >> $(TOP)/MINFO
+	$(PERL) $(TOP)/util/files.pl Makefile >> $(TOP)/MINFO
 	@target=files; $(RECURSIVE_MAKE)

 links:
@@ -107,7 +104,6 @@ lib:	$(LIB)
 	@touch lib
 $(LIB):	$(LIBOBJ)
 	$(AR) $(LIB) $(LIBOBJ)
-	test -z "$(FIPSLIBDIR)" || $(AR) $(LIB) $(FIPSLIBDIR)fipscanister.o
 	$(RANLIB) $(LIB) || echo Never mind.

 shared: buildinf.h lib subdirs
@@ -177,7 +173,6 @@ ex_data.o: ../include/openssl/opensslconf.h ../include/openssl/opensslv.h
 ex_data.o: ../include/openssl/ossl_typ.h ../include/openssl/safestack.h
 ex_data.o: ../include/openssl/stack.h ../include/openssl/symhacks.h cryptlib.h
 ex_data.o: ex_data.c
-fips_ers.o: ../include/openssl/opensslconf.h fips_ers.c
 mem.o: ../e_os.h ../include/openssl/bio.h ../include/openssl/buffer.h
 mem.o: ../include/openssl/crypto.h ../include/openssl/e_os2.h
 mem.o: ../include/openssl/err.h ../include/openssl/lhash.h
@@ -198,19 +193,6 @@ mem_dbg.o: ../include/openssl/stack.h ../include/openssl/symhacks.h cryptlib.h
 mem_dbg.o: mem_dbg.c
 o_dir.o: ../e_os.h ../include/openssl/e_os2.h ../include/openssl/opensslconf.h
 o_dir.o: LPdir_unix.c o_dir.c o_dir.h
-o_fips.o: ../e_os.h ../include/openssl/bio.h ../include/openssl/buffer.h
-o_fips.o: ../include/openssl/crypto.h ../include/openssl/e_os2.h
-o_fips.o: ../include/openssl/err.h ../include/openssl/lhash.h
-o_fips.o: ../include/openssl/opensslconf.h ../include/openssl/opensslv.h
-o_fips.o: ../include/openssl/ossl_typ.h ../include/openssl/safestack.h
-o_fips.o: ../include/openssl/stack.h ../include/openssl/symhacks.h cryptlib.h
-o_fips.o: o_fips.c
-o_init.o: ../e_os.h ../include/openssl/bio.h ../include/openssl/crypto.h
-o_init.o: ../include/openssl/e_os2.h ../include/openssl/err.h
-o_init.o: ../include/openssl/lhash.h ../include/openssl/opensslconf.h
-o_init.o: ../include/openssl/opensslv.h ../include/openssl/ossl_typ.h
-o_init.o: ../include/openssl/safestack.h ../include/openssl/stack.h
-o_init.o: ../include/openssl/symhacks.h o_init.c
 o_str.o: ../e_os.h ../include/openssl/e_os2.h ../include/openssl/opensslconf.h
 o_str.o: o_str.c o_str.h
 o_time.o: ../include/openssl/e_os2.h ../include/openssl/opensslconf.h o_time.c
--- a/crypto/aes/.cvsignore
+++ b/crypto/aes/.cvsignore
@@ -3,6 +3,3 @@ Makefile.save
 *.flc
 semantic.cache
 aes-*.s
-aesni-*.s
-bsaes-*.s
-vpaes-*.s
--- a/crypto/aes/Makefile
+++ b/crypto/aes/Makefile
@@ -50,56 +50,21 @@ aes-ia64.s: asm/aes-ia64.S

 aes-586.s:	asm/aes-586.pl ../perlasm/x86asm.pl
 	$(PERL) asm/aes-586.pl $(PERLASM_SCHEME) $(CFLAGS) $(PROCESSOR) > $@
-vpaes-x86.s:	asm/vpaes-x86.pl ../perlasm/x86asm.pl
-	$(PERL) asm/vpaes-x86.pl $(PERLASM_SCHEME) $(CFLAGS) $(PROCESSOR) > $@
-aesni-x86.s:	asm/aesni-x86.pl ../perlasm/x86asm.pl
-	$(PERL) asm/aesni-x86.pl $(PERLASM_SCHEME) $(CFLAGS) $(PROCESSOR) > $@

 aes-x86_64.s: asm/aes-x86_64.pl
 	$(PERL) asm/aes-x86_64.pl $(PERLASM_SCHEME) > $@
-vpaes-x86_64.s:	asm/vpaes-x86_64.pl
-	$(PERL) asm/vpaes-x86_64.pl $(PERLASM_SCHEME) > $@
-bsaes-x86_64.s:	asm/bsaes-x86_64.pl
-	$(PERL) asm/bsaes-x86_64.pl $(PERLASM_SCHEME) > $@
-aesni-x86_64.s: asm/aesni-x86_64.pl
-	$(PERL) asm/aesni-x86_64.pl $(PERLASM_SCHEME) > $@
-aesni-sha1-x86_64.s:	asm/aesni-sha1-x86_64.pl
-	$(PERL) asm/aesni-sha1-x86_64.pl $(PERLASM_SCHEME) > $@
-aesni-sha256-x86_64.s:	asm/aesni-sha256-x86_64.pl
-	$(PERL) asm/aesni-sha256-x86_64.pl $(PERLASM_SCHEME) > $@
-aesni-mb-x86_64.s:	asm/aesni-mb-x86_64.pl
-	$(PERL) asm/aesni-mb-x86_64.pl $(PERLASM_SCHEME) > $@

 aes-sparcv9.s: asm/aes-sparcv9.pl
 	$(PERL) asm/aes-sparcv9.pl $(CFLAGS) > $@
-aest4-sparcv9.s: asm/aest4-sparcv9.pl
-	$(PERL) asm/aest4-sparcv9.pl $(CFLAGS) > $@

 aes-ppc.s:	asm/aes-ppc.pl
 	$(PERL) asm/aes-ppc.pl $(PERLASM_SCHEME) $@
-vpaes-ppc.s:	asm/vpaes-ppc.pl
-	$(PERL) asm/vpaes-ppc.pl $(PERLASM_SCHEME) $@
-aesp8-ppc.s:	asm/aesp8-ppc.pl
-	$(PERL) asm/aesp8-ppc.pl $(PERLASM_SCHEME) $@
-
-aes-parisc.s:	asm/aes-parisc.pl
-	$(PERL) asm/aes-parisc.pl $(PERLASM_SCHEME) $@
-
-aes-mips.S:	asm/aes-mips.pl
-	$(PERL) asm/aes-mips.pl $(PERLASM_SCHEME) $@
-
-aesv8-armx.S:	asm/aesv8-armx.pl
-	$(PERL) asm/aesv8-armx.pl $(PERLASM_SCHEME) $@
-aesv8-armx.o:	aesv8-armx.S

 # GNU make "catch all"
-aes-%.S:	asm/aes-%.pl;	$(PERL) $< $(PERLASM_SCHEME) > $@
-aes-armv4.o:	aes-armv4.S
-bsaes-%.S:	asm/bsaes-%.pl;	$(PERL) $< $(PERLASM_SCHEME) $@
-bsaes-armv7.o:	bsaes-armv7.S
+aes-%.s:	asm/aes-%.pl;	$(PERL) $< $(CFLAGS) > $@

 files:
-	$(PERL) $(TOP)/util/files.pl "AES_ENC=$(AES_ENC)" Makefile >> $(TOP)/MINFO
+	$(PERL) $(TOP)/util/files.pl Makefile >> $(TOP)/MINFO

 links:
 	@$(PERL) $(TOP)/util/mklink.pl ../../include/openssl $(EXHEADER)
@@ -152,18 +117,16 @@ aes_ige.o: ../../include/openssl/lhash.h ../../include/openssl/opensslconf.h
 aes_ige.o: ../../include/openssl/opensslv.h ../../include/openssl/ossl_typ.h
 aes_ige.o: ../../include/openssl/safestack.h ../../include/openssl/stack.h
 aes_ige.o: ../../include/openssl/symhacks.h ../cryptlib.h aes_ige.c aes_locl.h
-aes_misc.o: ../../include/openssl/aes.h ../../include/openssl/crypto.h
-aes_misc.o: ../../include/openssl/e_os2.h ../../include/openssl/opensslconf.h
-aes_misc.o: ../../include/openssl/opensslv.h ../../include/openssl/ossl_typ.h
-aes_misc.o: ../../include/openssl/safestack.h ../../include/openssl/stack.h
-aes_misc.o: ../../include/openssl/symhacks.h aes_locl.h aes_misc.c
+aes_misc.o: ../../include/openssl/aes.h ../../include/openssl/e_os2.h
+aes_misc.o: ../../include/openssl/opensslconf.h
+aes_misc.o: ../../include/openssl/opensslv.h aes_locl.h aes_misc.c
 aes_ofb.o: ../../include/openssl/aes.h ../../include/openssl/modes.h
 aes_ofb.o: ../../include/openssl/opensslconf.h aes_ofb.c
 aes_wrap.o: ../../e_os.h ../../include/openssl/aes.h
 aes_wrap.o: ../../include/openssl/bio.h ../../include/openssl/buffer.h
 aes_wrap.o: ../../include/openssl/crypto.h ../../include/openssl/e_os2.h
 aes_wrap.o: ../../include/openssl/err.h ../../include/openssl/lhash.h
-aes_wrap.o: ../../include/openssl/modes.h ../../include/openssl/opensslconf.h
+aes_wrap.o: ../../include/openssl/opensslconf.h
 aes_wrap.o: ../../include/openssl/opensslv.h ../../include/openssl/ossl_typ.h
 aes_wrap.o: ../../include/openssl/safestack.h ../../include/openssl/stack.h
 aes_wrap.o: ../../include/openssl/symhacks.h ../cryptlib.h aes_wrap.c
--- a/crypto/aes/aes.h
+++ b/crypto/aes/aes.h
@@ -90,11 +90,6 @@ int AES_set_encrypt_key(const unsigned char *userKey, const int bits,
 int AES_set_decrypt_key(const unsigned char *userKey, const int bits,
 	AES_KEY *key);

-int private_AES_set_encrypt_key(const unsigned char *userKey, const int bits,
-	AES_KEY *key);
-int private_AES_set_decrypt_key(const unsigned char *userKey, const int bits,
-	AES_KEY *key);
-
 void AES_encrypt(const unsigned char *in, unsigned char *out,
 	const AES_KEY *key);
 void AES_decrypt(const unsigned char *in, unsigned char *out,
--- a/crypto/aes/aes_core.c
+++ b/crypto/aes/aes_core.c
@@ -625,7 +625,7 @@ static const u32 rcon[] = {
 /**
 * Expand the cipher key into the encryption key schedule.
 */
-int private_AES_set_encrypt_key(const unsigned char *userKey, const int bits,
+int AES_set_encrypt_key(const unsigned char *userKey, const int bits,
 			AES_KEY *key) {

 	u32 *rk;
@@ -726,7 +726,7 @@ int private_AES_set_encrypt_key(const unsigned char *userKey, const int bits,
 /**
 * Expand the cipher key into the decryption key schedule.
 */
-int private_AES_set_decrypt_key(const unsigned char *userKey, const int bits,
+int AES_set_decrypt_key(const unsigned char *userKey, const int bits,
 			 AES_KEY *key) {

        u32 *rk;
@@ -734,7 +734,7 @@ int private_AES_set_decrypt_key(const unsigned char *userKey, const int bits,
 	u32 temp;

 	/* first, start with an encryption schedule */
-	status = private_AES_set_encrypt_key(userKey, bits, key);
+	status = AES_set_encrypt_key(userKey, bits, key);
 	if (status < 0)
 		return status;

@@ -1201,7 +1201,7 @@ static const u32 rcon[] = {
 /**
 * Expand the cipher key into the encryption key schedule.
 */
-int private_AES_set_encrypt_key(const unsigned char *userKey, const int bits,
+int AES_set_encrypt_key(const unsigned char *userKey, const int bits,
 			AES_KEY *key) {
 	u32 *rk;
   	int i = 0;
@@ -1301,7 +1301,7 @@ int private_AES_set_encrypt_key(const unsigned char *userKey, const int bits,
 /**
 * Expand the cipher key into the decryption key schedule.
 */
-int private_AES_set_decrypt_key(const unsigned char *userKey, const int bits,
+int AES_set_decrypt_key(const unsigned char *userKey, const int bits,
 			 AES_KEY *key) {

        u32 *rk;
@@ -1309,7 +1309,7 @@ int private_AES_set_decrypt_key(const unsigned char *userKey, const int bits,
 	u32 temp;

 	/* first, start with an encryption schedule */
-	status = private_AES_set_encrypt_key(userKey, bits, key);
+	status = AES_set_encrypt_key(userKey, bits, key);
 	if (status < 0)
 		return status;

--- a/crypto/aes/aes_misc.c
+++ b/crypto/aes/aes_misc.c
@@ -50,7 +50,6 @@
 */

 #include <openssl/opensslv.h>
-#include <openssl/crypto.h>
 #include <openssl/aes.h>
 #include "aes_locl.h"

@@ -63,23 +62,3 @@ const char *AES_options(void) {
        return "aes(partial)";
 #endif
 }
-
-/* FIPS wrapper functions to block low level AES calls in FIPS mode */
-
-int AES_set_encrypt_key(const unsigned char *userKey, const int bits,
-			AES_KEY *key)
-	{
-#ifdef OPENSSL_FIPS
-	fips_cipher_abort(AES);
-#endif
-	return private_AES_set_encrypt_key(userKey, bits, key);
-	}
-
-int AES_set_decrypt_key(const unsigned char *userKey, const int bits,
-			AES_KEY *key)
-	{
-#ifdef OPENSSL_FIPS
-	fips_cipher_abort(AES);
-#endif
-	return private_AES_set_decrypt_key(userKey, bits, key);
-	}
--- a/crypto/aes/aes_wrap.c
+++ b/crypto/aes/aes_wrap.c
@@ -53,18 +53,207 @@

 #include "cryptlib.h"
 #include <openssl/aes.h>
-#include <openssl/modes.h>
+#include <openssl/bio.h>
+
+static const unsigned char default_iv[] = {
+  0xA6, 0xA6, 0xA6, 0xA6, 0xA6, 0xA6, 0xA6, 0xA6,
+};

 int AES_wrap_key(AES_KEY *key, const unsigned char *iv,
 		unsigned char *out,
 		const unsigned char *in, unsigned int inlen)
 	{
-	return CRYPTO_128_wrap(key, iv, out, in, inlen, (block128_f)AES_encrypt);
+	unsigned char *A, B[16], *R;
+	unsigned int i, j, t;
+	if ((inlen & 0x7) || (inlen < 8))
+		return -1;
+	A = B;
+	t = 1;
+	memcpy(out + 8, in, inlen);
+	if (!iv)
+		iv = default_iv;
+
+	memcpy(A, iv, 8);
+
+	for (j = 0; j < 6; j++)
+		{
+		R = out + 8;
+		for (i = 0; i < inlen; i += 8, t++, R += 8)
+			{
+			memcpy(B + 8, R, 8);
+			AES_encrypt(B, B, key);
+			A[7] ^= (unsigned char)(t & 0xff);
+			if (t > 0xff)	
+				{
+				A[6] ^= (unsigned char)((t >> 8) & 0xff);
+				A[5] ^= (unsigned char)((t >> 16) & 0xff);
+				A[4] ^= (unsigned char)((t >> 24) & 0xff);
+				}
+			memcpy(R, B + 8, 8);
+			}
+		}
+	memcpy(out, A, 8);
+	return inlen + 8;
 	}

 int AES_unwrap_key(AES_KEY *key, const unsigned char *iv,
 		unsigned char *out,
 		const unsigned char *in, unsigned int inlen)
 	{
-	return CRYPTO_128_unwrap(key, iv, out, in, inlen, (block128_f)AES_decrypt);
+	unsigned char *A, B[16], *R;
+	unsigned int i, j, t;
+	inlen -= 8;
+	if (inlen & 0x7)
+		return -1;
+	if (inlen < 8)
+		return -1;
+	A = B;
+	t =  6 * (inlen >> 3);
+	memcpy(A, in, 8);
+	memcpy(out, in + 8, inlen);
+	for (j = 0; j < 6; j++)
+		{
+		R = out + inlen - 8;
+		for (i = 0; i < inlen; i += 8, t--, R -= 8)
+			{
+			A[7] ^= (unsigned char)(t & 0xff);
+			if (t > 0xff)	
+				{
+				A[6] ^= (unsigned char)((t >> 8) & 0xff);
+				A[5] ^= (unsigned char)((t >> 16) & 0xff);
+				A[4] ^= (unsigned char)((t >> 24) & 0xff);
+				}
+			memcpy(B + 8, R, 8);
+			AES_decrypt(B, B, key);
+			memcpy(R, B + 8, 8);
+			}
+		}
+	if (!iv)
+		iv = default_iv;
+	if (memcmp(A, iv, 8))
+		{
+		OPENSSL_cleanse(out, inlen);
+		return 0;
+		}
+	return inlen;
 	}
+
+#ifdef AES_WRAP_TEST
+
+int AES_wrap_unwrap_test(const unsigned char *kek, int keybits,
+			 const unsigned char *iv,
+			 const unsigned char *eout,
+			 const unsigned char *key, int keylen)
+	{
+	unsigned char *otmp = NULL, *ptmp = NULL;
+	int r, ret = 0;
+	AES_KEY wctx;
+	otmp = OPENSSL_malloc(keylen + 8);
+	ptmp = OPENSSL_malloc(keylen);
+	if (!otmp || !ptmp)
+		return 0;
+	if (AES_set_encrypt_key(kek, keybits, &wctx))
+		goto err;
+	r = AES_wrap_key(&wctx, iv, otmp, key, keylen);
+	if (r <= 0)
+		goto err;
+
+	if (eout && memcmp(eout, otmp, keylen))
+		goto err;
+		
+	if (AES_set_decrypt_key(kek, keybits, &wctx))
+		goto err;
+	r = AES_unwrap_key(&wctx, iv, ptmp, otmp, r);
+
+	if (memcmp(key, ptmp, keylen))
+		goto err;
+
+	ret = 1;
+
+	err:
+	if (otmp)
+		OPENSSL_free(otmp);
+	if (ptmp)
+		OPENSSL_free(ptmp);
+
+	return ret;
+
+	}
+
+
+
+int main(int argc, char **argv)
+{
+
+static const unsigned char kek[] = {
+  0x00, 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07,
+  0x08, 0x09, 0x0a, 0x0b, 0x0c, 0x0d, 0x0e, 0x0f,
+  0x10, 0x11, 0x12, 0x13, 0x14, 0x15, 0x16, 0x17,
+  0x18, 0x19, 0x1a, 0x1b, 0x1c, 0x1d, 0x1e, 0x1f
+};
+
+static const unsigned char key[] = {
+  0x00, 0x11, 0x22, 0x33, 0x44, 0x55, 0x66, 0x77,
+  0x88, 0x99, 0xaa, 0xbb, 0xcc, 0xdd, 0xee, 0xff,
+  0x00, 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07,
+  0x08, 0x09, 0x0a, 0x0b, 0x0c, 0x0d, 0x0e, 0x0f
+};
+
+static const unsigned char e1[] = {
+  0x1f, 0xa6, 0x8b, 0x0a, 0x81, 0x12, 0xb4, 0x47,
+  0xae, 0xf3, 0x4b, 0xd8, 0xfb, 0x5a, 0x7b, 0x82,
+  0x9d, 0x3e, 0x86, 0x23, 0x71, 0xd2, 0xcf, 0xe5
+};
+
+static const unsigned char e2[] = {
+  0x96, 0x77, 0x8b, 0x25, 0xae, 0x6c, 0xa4, 0x35,
+  0xf9, 0x2b, 0x5b, 0x97, 0xc0, 0x50, 0xae, 0xd2,
+  0x46, 0x8a, 0xb8, 0xa1, 0x7a, 0xd8, 0x4e, 0x5d
+};
+
+static const unsigned char e3[] = {
+  0x64, 0xe8, 0xc3, 0xf9, 0xce, 0x0f, 0x5b, 0xa2,
+  0x63, 0xe9, 0x77, 0x79, 0x05, 0x81, 0x8a, 0x2a,
+  0x93, 0xc8, 0x19, 0x1e, 0x7d, 0x6e, 0x8a, 0xe7
+};
+
+static const unsigned char e4[] = {
+  0x03, 0x1d, 0x33, 0x26, 0x4e, 0x15, 0xd3, 0x32,
+  0x68, 0xf2, 0x4e, 0xc2, 0x60, 0x74, 0x3e, 0xdc,
+  0xe1, 0xc6, 0xc7, 0xdd, 0xee, 0x72, 0x5a, 0x93,
+  0x6b, 0xa8, 0x14, 0x91, 0x5c, 0x67, 0x62, 0xd2
+};
+
+static const unsigned char e5[] = {
+  0xa8, 0xf9, 0xbc, 0x16, 0x12, 0xc6, 0x8b, 0x3f,
+  0xf6, 0xe6, 0xf4, 0xfb, 0xe3, 0x0e, 0x71, 0xe4,
+  0x76, 0x9c, 0x8b, 0x80, 0xa3, 0x2c, 0xb8, 0x95,
+  0x8c, 0xd5, 0xd1, 0x7d, 0x6b, 0x25, 0x4d, 0xa1
+};
+
+static const unsigned char e6[] = {
+  0x28, 0xc9, 0xf4, 0x04, 0xc4, 0xb8, 0x10, 0xf4,
+  0xcb, 0xcc, 0xb3, 0x5c, 0xfb, 0x87, 0xf8, 0x26,
+  0x3f, 0x57, 0x86, 0xe2, 0xd8, 0x0e, 0xd3, 0x26,
+  0xcb, 0xc7, 0xf0, 0xe7, 0x1a, 0x99, 0xf4, 0x3b,
+  0xfb, 0x98, 0x8b, 0x9b, 0x7a, 0x02, 0xdd, 0x21
+};
+
+	AES_KEY wctx, xctx;
+	int ret;
+	ret = AES_wrap_unwrap_test(kek, 128, NULL, e1, key, 16);
+	fprintf(stderr, "Key test result %d\n", ret);
+	ret = AES_wrap_unwrap_test(kek, 192, NULL, e2, key, 16);
+	fprintf(stderr, "Key test result %d\n", ret);
+	ret = AES_wrap_unwrap_test(kek, 256, NULL, e3, key, 16);
+	fprintf(stderr, "Key test result %d\n", ret);
+	ret = AES_wrap_unwrap_test(kek, 192, NULL, e4, key, 24);
+	fprintf(stderr, "Key test result %d\n", ret);
+	ret = AES_wrap_unwrap_test(kek, 256, NULL, e5, key, 24);
+	fprintf(stderr, "Key test result %d\n", ret);
+	ret = AES_wrap_unwrap_test(kek, 256, NULL, e6, key, 32);
+	fprintf(stderr, "Key test result %d\n", ret);
+}
+	
+	
+#endif
--- a/crypto/aes/aes_x86core.c
+++ b/crypto/aes/aes_x86core.c
@@ -89,10 +89,8 @@ typedef unsigned long long u64;
 #endif

 #undef ROTATE
-#if defined(_MSC_VER)
+#if defined(_MSC_VER) || defined(__ICC)
 # define ROTATE(a,n)	_lrotl(a,n)
-#elif defined(__ICC)
-# define ROTATE(a,n)	_rotl(a,n)
 #elif defined(__GNUC__) && __GNUC__>=2
 # if defined(__i386) || defined(__i386__) || defined(__x86_64) || defined(__x86_64__)
 #   define ROTATE(a,n)	({ register unsigned int ret;	\
--- a/crypto/aes/asm/aes-586.pl
+++ b/crypto/aes/asm/aes-586.pl
@@ -103,12 +103,11 @@
 # byte for 128-bit key.
 #
 #		ECB encrypt	ECB decrypt	CBC large chunk
-# P4		52[54]		83[95]		23
-# AMD K8	46[41]		66[70]		18
-# PIII		41[50]		60[77]		24
-# Core 2	31[36]		45[64]		18.5
-# Atom		76[100]		96[138]		60
-# Pentium	115		150		77
+# P4		56[60]		84[100]		23
+# AMD K8	48[44]		70[79]		18
+# PIII		41[50]		61[91]		24
+# Core 2	32[38]		45[70]		18.5
+# Pentium	120		160		77
 #
 # Version 4.1 switches to compact S-box even in key schedule setup.
 #
@@ -243,7 +242,7 @@ $vertical_spin=0;	# shift "verticaly" defaults to 0, because of

 sub encvert()
 { my ($te,@s) = @_;
-  my ($v0,$v1) = ($acc,$key);
+  my $v0 = $acc, $v1 = $key;

 	&mov	($v0,$s[3]);				# copy s3
 	&mov	(&DWP(4,"esp"),$s[2]);			# save s2
@@ -300,7 +299,7 @@ sub encvert()
 # Another experimental routine, which features "horizontal spin," but
 # eliminates one reference to stack. Strangely enough runs slower...
 sub enchoriz()
-{ my ($v0,$v1) = ($key,$acc);
+{ my $v0 = $key, $v1 = $acc;

 	&movz	($v0,&LB($s0));			#  3, 2, 1, 0*
 	&rotr	($s2,8);			#  8,11,10, 9
@@ -428,7 +427,7 @@ sub sse_encbody()
 ######################################################################

 sub enccompact()
-{ my $Fn = \&mov;
+{ my $Fn = mov;
  while ($#_>5) { pop(@_); $Fn=sub{}; }
  my ($i,$te,@s)=@_;
  my $tmp = $key;
@@ -477,25 +476,24 @@ sub enctransform()
  my $tmp = $tbl;
  my $r2  = $key ;

-	&and	($tmp,$s[$i]);
-	&lea	($r2,&DWP(0,$s[$i],$s[$i]));
-	&mov	($acc,$tmp);
+	&mov	($acc,$s[$i]);
+	&and	($acc,0x80808080);
+	&mov	($tmp,$acc);
 	&shr	($tmp,7);
-	&and	($r2,0xfefefefe);
+	&lea	($r2,&DWP(0,$s[$i],$s[$i]));
 	&sub	($acc,$tmp);
-	&mov	($tmp,$s[$i]);
+	&and	($r2,0xfefefefe);
 	&and	($acc,0x1b1b1b1b);
-	&rotr	($tmp,16);
+	&mov	($tmp,$s[$i]);
 	&xor	($acc,$r2);	# r2
-	&mov	($r2,$s[$i]);

 	&xor	($s[$i],$acc);	# r0 ^ r2
-	&rotr	($r2,16+8);
-	&xor	($acc,$tmp);
 	&rotl	($s[$i],24);
-	&xor	($acc,$r2);
-	&mov	($tmp,0x80808080)	if ($i!=1);
-	&xor	($s[$i],$acc);	# ROTATE(r2^r0,24) ^ r2
+	&xor	($s[$i],$acc)	# ROTATE(r2^r0,24) ^ r2
+	&rotr	($tmp,16);
+	&xor	($s[$i],$tmp);
+	&rotr	($tmp,8);
+	&xor	($s[$i],$tmp);
 }

 &function_begin_B("_x86_AES_encrypt_compact");
@@ -528,7 +526,6 @@ sub enctransform()
 		&enccompact(1,$tbl,$s1,$s2,$s3,$s0,1);
 		&enccompact(2,$tbl,$s2,$s3,$s0,$s1,1);
 		&enccompact(3,$tbl,$s3,$s0,$s1,$s2,1);
-		&mov	($tbl,0x80808080);
 		&enctransform(2);
 		&enctransform(3);
 		&enctransform(0);
@@ -610,84 +607,82 @@ sub sse_enccompact()
 	&pshufw	("mm5","mm4",0x0d);		# 15,14,11,10
 	&movd	("eax","mm1");			#  5, 4, 1, 0
 	&movd	("ebx","mm5");			# 15,14,11,10
-	&mov	($__key,$key);

 	&movz	($acc,&LB("eax"));		#  0
-	&movz	("edx",&HB("eax"));		#  1
-	&pshufw	("mm2","mm0",0x0d);		#  7, 6, 3, 2
 	&movz	("ecx",&BP(-128,$tbl,$acc,1));	#  0
-	&movz	($key,&LB("ebx"));		# 10
+	&pshufw	("mm2","mm0",0x0d);		#  7, 6, 3, 2
+	&movz	("edx",&HB("eax"));		#  1
 	&movz	("edx",&BP(-128,$tbl,"edx",1));	#  1
-	&shr	("eax",16);			#  5, 4
 	&shl	("edx",8);			#  1
+	&shr	("eax",16);			#  5, 4

-	&movz	($acc,&BP(-128,$tbl,$key,1));	# 10
-	&movz	($key,&HB("ebx"));		# 11
+	&movz	($acc,&LB("ebx"));		# 10
+	&movz	($acc,&BP(-128,$tbl,$acc,1));	# 10
 	&shl	($acc,16);			# 10
-	&pshufw	("mm6","mm4",0x08);		# 13,12, 9, 8
 	&or	("ecx",$acc);			# 10
-	&movz	($acc,&BP(-128,$tbl,$key,1));	# 11
-	&movz	($key,&HB("eax"));		#  5
+	&pshufw	("mm6","mm4",0x08);		# 13,12, 9, 8
+	&movz	($acc,&HB("ebx"));		# 11
+	&movz	($acc,&BP(-128,$tbl,$acc,1));	# 11
 	&shl	($acc,24);			# 11
-	&shr	("ebx",16);			# 15,14
 	&or	("edx",$acc);			# 11
+	&shr	("ebx",16);			# 15,14

-	&movz	($acc,&BP(-128,$tbl,$key,1));	#  5
-	&movz	($key,&HB("ebx"));		# 15
+	&movz	($acc,&HB("eax"));		#  5
+	&movz	($acc,&BP(-128,$tbl,$acc,1));	#  5
 	&shl	($acc,8);			#  5
 	&or	("ecx",$acc);			#  5
-	&movz	($acc,&BP(-128,$tbl,$key,1));	# 15
-	&movz	($key,&LB("eax"));		#  4
+	&movz	($acc,&HB("ebx"));		# 15
+	&movz	($acc,&BP(-128,$tbl,$acc,1));	# 15
 	&shl	($acc,24);			# 15
 	&or	("ecx",$acc);			# 15
-
-	&movz	($acc,&BP(-128,$tbl,$key,1));	#  4
-	&movz	($key,&LB("ebx"));		# 14
-	&movd	("eax","mm2");			#  7, 6, 3, 2
 	&movd	("mm0","ecx");			# t[0] collected
-	&movz	("ecx",&BP(-128,$tbl,$key,1));	# 14
-	&movz	($key,&HB("eax"));		#  3
-	&shl	("ecx",16);			# 14
-	&movd	("ebx","mm6");			# 13,12, 9, 8
+
+	&movz	($acc,&LB("eax"));		#  4
+	&movz	("ecx",&BP(-128,$tbl,$acc,1));	#  4
+	&movd	("eax","mm2");			#  7, 6, 3, 2
+	&movz	($acc,&LB("ebx"));		# 14
+	&movz	($acc,&BP(-128,$tbl,$acc,1));	# 14
+	&shl	($acc,16);			# 14
 	&or	("ecx",$acc);			# 14

-	&movz	($acc,&BP(-128,$tbl,$key,1));	#  3
-	&movz	($key,&HB("ebx"));		#  9
+	&movd	("ebx","mm6");			# 13,12, 9, 8
+	&movz	($acc,&HB("eax"));		#  3
+	&movz	($acc,&BP(-128,$tbl,$acc,1));	#  3
 	&shl	($acc,24);			#  3
 	&or	("ecx",$acc);			#  3
-	&movz	($acc,&BP(-128,$tbl,$key,1));	#  9
-	&movz	($key,&LB("ebx"));		#  8
+	&movz	($acc,&HB("ebx"));		#  9
+	&movz	($acc,&BP(-128,$tbl,$acc,1));	#  9
 	&shl	($acc,8);			#  9
-	&shr	("ebx",16);			# 13,12
 	&or	("ecx",$acc);			#  9
-
-	&movz	($acc,&BP(-128,$tbl,$key,1));	#  8
-	&movz	($key,&LB("eax"));		#  2
-	&shr	("eax",16);			#  7, 6
 	&movd	("mm1","ecx");			# t[1] collected
-	&movz	("ecx",&BP(-128,$tbl,$key,1));	#  2
-	&movz	($key,&HB("eax"));		#  7
-	&shl	("ecx",16);			#  2
-	&and	("eax",0xff);			#  6
+
+	&movz	($acc,&LB("ebx"));		#  8
+	&movz	("ecx",&BP(-128,$tbl,$acc,1));	#  8
+	&shr	("ebx",16);			# 13,12
+	&movz	($acc,&LB("eax"));		#  2
+	&movz	($acc,&BP(-128,$tbl,$acc,1));	#  2
+	&shl	($acc,16);			#  2
 	&or	("ecx",$acc);			#  2
+	&shr	("eax",16);			#  7, 6

 	&punpckldq	("mm0","mm1");		# t[0,1] collected

-	&movz	($acc,&BP(-128,$tbl,$key,1));	#  7
-	&movz	($key,&HB("ebx"));		# 13
+	&movz	($acc,&HB("eax"));		#  7
+	&movz	($acc,&BP(-128,$tbl,$acc,1));	#  7
 	&shl	($acc,24);			#  7
-	&and	("ebx",0xff);			# 12
-	&movz	("eax",&BP(-128,$tbl,"eax",1));	#  6
 	&or	("ecx",$acc);			#  7
+	&and	("eax",0xff);			#  6
+	&movz	("eax",&BP(-128,$tbl,"eax",1));	#  6
 	&shl	("eax",16);			#  6
-	&movz	($acc,&BP(-128,$tbl,$key,1));	# 13
 	&or	("edx","eax");			#  6
+	&movz	($acc,&HB("ebx"));		# 13
+	&movz	($acc,&BP(-128,$tbl,$acc,1));	# 13
 	&shl	($acc,8);			# 13
-	&movz	("ebx",&BP(-128,$tbl,"ebx",1));	# 12
 	&or	("ecx",$acc);			# 13
-	&or	("edx","ebx");			# 12
-	&mov	($key,$__key);
 	&movd	("mm4","ecx");			# t[2] collected
+	&and	("ebx",0xff);			# 12
+	&movz	("ebx",&BP(-128,$tbl,"ebx",1));	# 12
+	&or	("edx","ebx");			# 12
 	&movd	("mm5","edx");			# t[3] collected

 	&punpckldq	("mm4","mm5");		# t[2,3] collected
@@ -1227,7 +1222,7 @@ sub enclast()
 ######################################################################

 sub deccompact()
-{ my $Fn = \&mov;
+{ my $Fn = mov;
  while ($#_>5) { pop(@_); $Fn=sub{}; }
  my ($i,$td,@s)=@_;
  my $tmp = $key;
@@ -1275,30 +1270,30 @@ sub dectransform()
  my $tp4 = @s[($i+3)%4]; $tp4 = @s[3] if ($i==1);
  my $tp8 = $tbl;

-	&mov	($tmp,0x80808080);
-	&and	($tmp,$s[$i]);
-	&mov	($acc,$tmp);
+	&mov	($acc,$s[$i]);
+	&and	($acc,0x80808080);
+	&mov	($tmp,$acc);
 	&shr	($tmp,7);
 	&lea	($tp2,&DWP(0,$s[$i],$s[$i]));
 	&sub	($acc,$tmp);
 	&and	($tp2,0xfefefefe);
 	&and	($acc,0x1b1b1b1b);
-	&xor	($tp2,$acc);
-	&mov	($tmp,0x80808080);
+	&xor	($acc,$tp2);
+	&mov	($tp2,$acc);

-	&and	($tmp,$tp2);
-	&mov	($acc,$tmp);
+	&and	($acc,0x80808080);
+	&mov	($tmp,$acc);
 	&shr	($tmp,7);
 	&lea	($tp4,&DWP(0,$tp2,$tp2));
 	&sub	($acc,$tmp);
 	&and	($tp4,0xfefefefe);
 	&and	($acc,0x1b1b1b1b);
 	 &xor	($tp2,$s[$i]);	# tp2^tp1
-	&xor	($tp4,$acc);
-	&mov	($tmp,0x80808080);
+	&xor	($acc,$tp4);
+	&mov	($tp4,$acc);

-	&and	($tmp,$tp4);
-	&mov	($acc,$tmp);
+	&and	($acc,0x80808080);
+	&mov	($tmp,$acc);
 	&shr	($tmp,7);
 	&lea	($tp8,&DWP(0,$tp4,$tp4));
 	&sub	($acc,$tmp);
@@ -1310,13 +1305,13 @@ sub dectransform()

 	&xor	($s[$i],$tp2);
 	&xor	($tp2,$tp8);
+	&rotl	($tp2,24);
 	&xor	($s[$i],$tp4);
 	&xor	($tp4,$tp8);
-	&rotl	($tp2,24);
-	&xor	($s[$i],$tp8);	# ^= tp8^(tp4^tp1)^(tp2^tp1)
 	&rotl	($tp4,16);
-	&xor	($s[$i],$tp2);	# ^= ROTATE(tp8^tp2^tp1,24)
+	&xor	($s[$i],$tp8);	# ^= tp8^(tp4^tp1)^(tp2^tp1)
 	&rotl	($tp8,8);
+	&xor	($s[$i],$tp2);	# ^= ROTATE(tp8^tp2^tp1,24)
 	&xor	($s[$i],$tp4);	# ^= ROTATE(tp8^tp4^tp1,16)
 	 &mov	($s[0],$__s0)			if($i==2); #prefetch $s0
 	 &mov	($s[1],$__s1)			if($i==3); #prefetch $s1
@@ -1394,87 +1389,85 @@ sub dectransform()
 sub sse_deccompact()
 {
 	&pshufw	("mm1","mm0",0x0c);		#  7, 6, 1, 0
-	&pshufw	("mm5","mm4",0x09);		# 13,12,11,10
 	&movd	("eax","mm1");			#  7, 6, 1, 0
-	&movd	("ebx","mm5");			# 13,12,11,10
-	&mov	($__key,$key);

+	&pshufw	("mm5","mm4",0x09);		# 13,12,11,10
 	&movz	($acc,&LB("eax"));		#  0
-	&movz	("edx",&HB("eax"));		#  1
-	&pshufw	("mm2","mm0",0x06);		#  3, 2, 5, 4
 	&movz	("ecx",&BP(-128,$tbl,$acc,1));	#  0
-	&movz	($key,&LB("ebx"));		# 10
+	&movd	("ebx","mm5");			# 13,12,11,10
+	&movz	("edx",&HB("eax"));		#  1
 	&movz	("edx",&BP(-128,$tbl,"edx",1));	#  1
-	&shr	("eax",16);			#  7, 6
 	&shl	("edx",8);			#  1

-	&movz	($acc,&BP(-128,$tbl,$key,1));	# 10
-	&movz	($key,&HB("ebx"));		# 11
+	&pshufw	("mm2","mm0",0x06);		#  3, 2, 5, 4
+	&movz	($acc,&LB("ebx"));		# 10
+	&movz	($acc,&BP(-128,$tbl,$acc,1));	# 10
 	&shl	($acc,16);			# 10
-	&pshufw	("mm6","mm4",0x03);		# 9, 8,15,14
 	&or	("ecx",$acc);			# 10
-	&movz	($acc,&BP(-128,$tbl,$key,1));	# 11
-	&movz	($key,&HB("eax"));		#  7
+	&shr	("eax",16);			#  7, 6
+	&movz	($acc,&HB("ebx"));		# 11
+	&movz	($acc,&BP(-128,$tbl,$acc,1));	# 11
 	&shl	($acc,24);			# 11
-	&shr	("ebx",16);			# 13,12
 	&or	("edx",$acc);			# 11
+	&shr	("ebx",16);			# 13,12

-	&movz	($acc,&BP(-128,$tbl,$key,1));	#  7
-	&movz	($key,&HB("ebx"));		# 13
+	&pshufw	("mm6","mm4",0x03);		# 9, 8,15,14
+	&movz	($acc,&HB("eax"));		#  7
+	&movz	($acc,&BP(-128,$tbl,$acc,1));	#  7
 	&shl	($acc,24);			#  7
 	&or	("ecx",$acc);			#  7
-	&movz	($acc,&BP(-128,$tbl,$key,1));	# 13
-	&movz	($key,&LB("eax"));		#  6
+	&movz	($acc,&HB("ebx"));		# 13
+	&movz	($acc,&BP(-128,$tbl,$acc,1));	# 13
 	&shl	($acc,8);			# 13
-	&movd	("eax","mm2");			#  3, 2, 5, 4
 	&or	("ecx",$acc);			# 13
-
-	&movz	($acc,&BP(-128,$tbl,$key,1));	#  6
-	&movz	($key,&LB("ebx"));		# 12
-	&shl	($acc,16);			#  6
-	&movd	("ebx","mm6");			#  9, 8,15,14
 	&movd	("mm0","ecx");			# t[0] collected
-	&movz	("ecx",&BP(-128,$tbl,$key,1));	# 12
-	&movz	($key,&LB("eax"));		#  4
+
+	&movz	($acc,&LB("eax"));		#  6
+	&movd	("eax","mm2");			#  3, 2, 5, 4
+	&movz	("ecx",&BP(-128,$tbl,$acc,1));	#  6
+	&shl	("ecx",16);			#  6
+	&movz	($acc,&LB("ebx"));		# 12
+	&movd	("ebx","mm6");			#  9, 8,15,14
+	&movz	($acc,&BP(-128,$tbl,$acc,1));	# 12
 	&or	("ecx",$acc);			# 12

-	&movz	($acc,&BP(-128,$tbl,$key,1));	#  4
-	&movz	($key,&LB("ebx"));		# 14
+	&movz	($acc,&LB("eax"));		#  4
+	&movz	($acc,&BP(-128,$tbl,$acc,1));	#  4
 	&or	("edx",$acc);			#  4
-	&movz	($acc,&BP(-128,$tbl,$key,1));	# 14
-	&movz	($key,&HB("eax"));		#  5
+	&movz	($acc,&LB("ebx"));		# 14
+	&movz	($acc,&BP(-128,$tbl,$acc,1));	# 14
 	&shl	($acc,16);			# 14
-	&shr	("eax",16);			#  3, 2
 	&or	("edx",$acc);			# 14
-
-	&movz	($acc,&BP(-128,$tbl,$key,1));	#  5
-	&movz	($key,&HB("ebx"));		# 15
-	&shr	("ebx",16);			#  9, 8
-	&shl	($acc,8);			#  5
 	&movd	("mm1","edx");			# t[1] collected
-	&movz	("edx",&BP(-128,$tbl,$key,1));	# 15
-	&movz	($key,&HB("ebx"));		#  9
-	&shl	("edx",24);			# 15
-	&and	("ebx",0xff);			#  8
+
+	&movz	($acc,&HB("eax"));		#  5
+	&movz	("edx",&BP(-128,$tbl,$acc,1));	#  5
+	&shl	("edx",8);			#  5
+	&movz	($acc,&HB("ebx"));		# 15
+	&shr	("eax",16);			#  3, 2
+	&movz	($acc,&BP(-128,$tbl,$acc,1));	# 15
+	&shl	($acc,24);			# 15
 	&or	("edx",$acc);			# 15
+	&shr	("ebx",16);			#  9, 8

 	&punpckldq	("mm0","mm1");		# t[0,1] collected

-	&movz	($acc,&BP(-128,$tbl,$key,1));	#  9
-	&movz	($key,&LB("eax"));		#  2
+	&movz	($acc,&HB("ebx"));		#  9
+	&movz	($acc,&BP(-128,$tbl,$acc,1));	#  9
 	&shl	($acc,8);			#  9
-	&movz	("eax",&HB("eax"));		#  3
-	&movz	("ebx",&BP(-128,$tbl,"ebx",1));	#  8
 	&or	("ecx",$acc);			#  9
-	&movz	($acc,&BP(-128,$tbl,$key,1));	#  2
+	&and	("ebx",0xff);			#  8
+	&movz	("ebx",&BP(-128,$tbl,"ebx",1));	#  8
 	&or	("edx","ebx");			#  8
+	&movz	($acc,&LB("eax"));		#  2
+	&movz	($acc,&BP(-128,$tbl,$acc,1));	#  2
 	&shl	($acc,16);			#  2
-	&movz	("eax",&BP(-128,$tbl,"eax",1));	#  3
 	&or	("edx",$acc);			#  2
+	&movd	("mm4","edx");			# t[2] collected
+	&movz	("eax",&HB("eax"));		#  3
+	&movz	("eax",&BP(-128,$tbl,"eax",1));	#  3
 	&shl	("eax",24);			#  3
 	&or	("ecx","eax");			#  3
-	&mov	($key,$__key);
-	&movd	("mm4","edx");			# t[2] collected
 	&movd	("mm5","ecx");			# t[3] collected

 	&punpckldq	("mm4","mm5");		# t[2,3] collected
@@ -2188,8 +2181,8 @@ my $mark=&DWP(76+240,"esp");	# copy of aes_key->rounds
 	&mov	("ecx",240/4);
 	&xor	("eax","eax");
 	&align	(4);
-	&data_word(0xABF3F689);		# rep stosd
-	&set_label("skip_ezero");
+	&data_word(0xABF3F689);	# rep stosd
+	&set_label("skip_ezero")
 	&mov	("esp",$_esp);
 	&popf	();
    &set_label("drop_out");
@@ -2308,8 +2301,8 @@ my $mark=&DWP(76+240,"esp");	# copy of aes_key->rounds
 	&mov	("ecx",240/4);
 	&xor	("eax","eax");
 	&align	(4);
-	&data_word(0xABF3F689);		# rep stosd
-	&set_label("skip_dzero");
+	&data_word(0xABF3F689);	# rep stosd
+	&set_label("skip_dzero")
 	&mov	("esp",$_esp);
 	&popf	();
 	&function_end_A();
@@ -2861,43 +2854,43 @@ sub enckey()
    &set_label("exit");
 &function_end("_x86_AES_set_encrypt_key");

-# int private_AES_set_encrypt_key(const unsigned char *userKey, const int bits,
+# int AES_set_encrypt_key(const unsigned char *userKey, const int bits,
 #                        AES_KEY *key)
-&function_begin_B("private_AES_set_encrypt_key");
+&function_begin_B("AES_set_encrypt_key");
 	&call	("_x86_AES_set_encrypt_key");
 	&ret	();
-&function_end_B("private_AES_set_encrypt_key");
+&function_end_B("AES_set_encrypt_key");

 sub deckey()
 { my ($i,$key,$tp1,$tp2,$tp4,$tp8) = @_;
  my $tmp = $tbl;

-	&mov	($tmp,0x80808080);
-	&and	($tmp,$tp1);
-	&lea	($tp2,&DWP(0,$tp1,$tp1));
-	&mov	($acc,$tmp);
+	&mov	($acc,$tp1);
+	&and	($acc,0x80808080);
+	&mov	($tmp,$acc);
 	&shr	($tmp,7);
+	&lea	($tp2,&DWP(0,$tp1,$tp1));
 	&sub	($acc,$tmp);
 	&and	($tp2,0xfefefefe);
 	&and	($acc,0x1b1b1b1b);
-	&xor	($tp2,$acc);
-	&mov	($tmp,0x80808080);
+	&xor	($acc,$tp2);
+	&mov	($tp2,$acc);

-	&and	($tmp,$tp2);
-	&lea	($tp4,&DWP(0,$tp2,$tp2));
-	&mov	($acc,$tmp);
+	&and	($acc,0x80808080);
+	&mov	($tmp,$acc);
 	&shr	($tmp,7);
+	&lea	($tp4,&DWP(0,$tp2,$tp2));
 	&sub	($acc,$tmp);
 	&and	($tp4,0xfefefefe);
 	&and	($acc,0x1b1b1b1b);
 	 &xor	($tp2,$tp1);	# tp2^tp1
-	&xor	($tp4,$acc);
-	&mov	($tmp,0x80808080);
+	&xor	($acc,$tp4);
+	&mov	($tp4,$acc);

-	&and	($tmp,$tp4);
-	&lea	($tp8,&DWP(0,$tp4,$tp4));
-	&mov	($acc,$tmp);
+	&and	($acc,0x80808080);
+	&mov	($tmp,$acc);
 	&shr	($tmp,7);
+	&lea	($tp8,&DWP(0,$tp4,$tp4));
 	 &xor	($tp4,$tp1);	# tp4^tp1
 	&sub	($acc,$tmp);
 	&and	($tp8,0xfefefefe);
@@ -2923,9 +2916,9 @@ sub deckey()
 	&mov	(&DWP(4*$i,$key),$tp1);
 }

-# int private_AES_set_decrypt_key(const unsigned char *userKey, const int bits,
+# int AES_set_decrypt_key(const unsigned char *userKey, const int bits,
 #                        AES_KEY *key)
-&function_begin_B("private_AES_set_decrypt_key");
+&function_begin_B("AES_set_decrypt_key");
 	&call	("_x86_AES_set_encrypt_key");
 	&cmp	("eax",0);
 	&je	(&label("proceed"));
@@ -2981,7 +2974,7 @@ sub deckey()
 	&jb	(&label("permute"));

 	&xor	("eax","eax");			# return success
-&function_end("private_AES_set_decrypt_key");
+&function_end("AES_set_decrypt_key");
 &asciz("AES for x86, CRYPTOGAMS by <appro\@openssl.org>");

 &asm_finish();
--- a/crypto/aes/asm/aes-armv4.pl
+++ b/crypto/aes/asm/aes-armv4.pl
@@ -1,7 +1,7 @@
 #!/usr/bin/env perl

 # ====================================================================
-# Written by Andy Polyakov <appro@openssl.org> for the OpenSSL
+# Written by Andy Polyakov <appro@fy.chalmers.se> for the OpenSSL
 # project. The module is, however, dual licensed under OpenSSL and
 # CRYPTOGAMS licenses depending on where you obtain it. For further
 # details see http://www.openssl.org/~appro/cryptogams/.
@@ -27,11 +27,6 @@
 # Rescheduling for dual-issue pipeline resulted in 12% improvement on
 # Cortex A8 core and ~25 cycles per byte processed with 128-bit key.

-# February 2011.
-#
-# Profiler-assisted and platform-specific optimization resulted in 16%
-# improvement on Cortex A8 core and ~21.5 cycles per byte.
-
 while (($output=shift) && ($output!~/^\w[\w\-]*\.\w+$/)) {}
 open STDOUT,">$output";

@@ -51,23 +46,8 @@ $key="r11";
 $rounds="r12";

 $code=<<___;
-#ifndef __KERNEL__
-# include "arm_arch.h"
-#else
-# define __ARM_ARCH__ __LINUX_ARM_ARCH__
-#endif
-
 .text
-#if __ARM_ARCH__<7
 .code	32
-#else
-.syntax	unified
-# ifdef __thumb2__
-.thumb
-# else
-.code	32
-# endif
-#endif

 .type	AES_Te,%object
 .align	5
@@ -181,16 +161,12 @@ AES_Te:
 .type   AES_encrypt,%function
 .align	5
 AES_encrypt:
-#if __ARM_ARCH__<7
 	sub	r3,pc,#8		@ AES_encrypt
-#else
-	adr	r3,AES_encrypt
-#endif
 	stmdb   sp!,{r1,r4-r12,lr}
 	mov	$rounds,r0		@ inp
 	mov	$key,r2
 	sub	$tbl,r3,#AES_encrypt-AES_Te	@ Te
-#if __ARM_ARCH__<7
+
 	ldrb	$s0,[$rounds,#3]	@ load input data in endian-neutral
 	ldrb	$t1,[$rounds,#2]	@ manner...
 	ldrb	$t2,[$rounds,#1]
@@ -219,33 +195,10 @@ AES_encrypt:
 	orr	$s3,$s3,$t1,lsl#8
 	orr	$s3,$s3,$t2,lsl#16
 	orr	$s3,$s3,$t3,lsl#24
-#else
-	ldr	$s0,[$rounds,#0]
-	ldr	$s1,[$rounds,#4]
-	ldr	$s2,[$rounds,#8]
-	ldr	$s3,[$rounds,#12]
-#ifdef __ARMEL__
-	rev	$s0,$s0
-	rev	$s1,$s1
-	rev	$s2,$s2
-	rev	$s3,$s3
-#endif
-#endif
+
 	bl	_armv4_AES_encrypt

 	ldr	$rounds,[sp],#4		@ pop out
-#if __ARM_ARCH__>=7
-#ifdef __ARMEL__
-	rev	$s0,$s0
-	rev	$s1,$s1
-	rev	$s2,$s2
-	rev	$s3,$s3
-#endif
-	str	$s0,[$rounds,#0]
-	str	$s1,[$rounds,#4]
-	str	$s2,[$rounds,#8]
-	str	$s3,[$rounds,#12]
-#else
 	mov	$t1,$s0,lsr#24		@ write output in endian-neutral
 	mov	$t2,$s0,lsr#16		@ manner...
 	mov	$t3,$s0,lsr#8
@@ -274,15 +227,11 @@ AES_encrypt:
 	strb	$t2,[$rounds,#13]
 	strb	$t3,[$rounds,#14]
 	strb	$s3,[$rounds,#15]
-#endif
-#if __ARM_ARCH__>=5
-	ldmia	sp!,{r4-r12,pc}
-#else
+
 	ldmia   sp!,{r4-r12,lr}
 	tst	lr,#1
 	moveq	pc,lr			@ be binary compatible with V4, yet
 	bx	lr			@ interoperable with Thumb ISA:-)
-#endif
 .size	AES_encrypt,.-AES_encrypt

 .type   _armv4_AES_encrypt,%function
@@ -322,11 +271,11 @@ _armv4_AES_encrypt:
 	and	$i2,lr,$s2,lsr#16	@ i1
 	eor	$t3,$t3,$i3,ror#8
 	and	$i3,lr,$s2
-	ldr	$i1,[$tbl,$i1,lsl#2]	@ Te2[s2>>8]
 	eor	$s1,$s1,$t1,ror#24
-	ldr	$i2,[$tbl,$i2,lsl#2]	@ Te1[s2>>16]
+	ldr	$i1,[$tbl,$i1,lsl#2]	@ Te2[s2>>8]
 	mov	$s2,$s2,lsr#24

+	ldr	$i2,[$tbl,$i2,lsl#2]	@ Te1[s2>>16]
 	ldr	$i3,[$tbl,$i3,lsl#2]	@ Te3[s2>>0]
 	eor	$s0,$s0,$i1,ror#16
 	ldr	$s2,[$tbl,$s2,lsl#2]	@ Te0[s2>>24]
@@ -335,16 +284,16 @@ _armv4_AES_encrypt:
 	and	$i2,lr,$s3,lsr#8	@ i1
 	eor	$t3,$t3,$i3,ror#16
 	and	$i3,lr,$s3,lsr#16	@ i2
-	ldr	$i1,[$tbl,$i1,lsl#2]	@ Te3[s3>>0]
 	eor	$s2,$s2,$t2,ror#16
-	ldr	$i2,[$tbl,$i2,lsl#2]	@ Te2[s3>>8]
+	ldr	$i1,[$tbl,$i1,lsl#2]	@ Te3[s3>>0]
 	mov	$s3,$s3,lsr#24

+	ldr	$i2,[$tbl,$i2,lsl#2]	@ Te2[s3>>8]
 	ldr	$i3,[$tbl,$i3,lsl#2]	@ Te1[s3>>16]
 	eor	$s0,$s0,$i1,ror#24
-	ldr	$i1,[$key],#16
-	eor	$s1,$s1,$i2,ror#16
 	ldr	$s3,[$tbl,$s3,lsl#2]	@ Te0[s3>>24]
+	eor	$s1,$s1,$i2,ror#16
+	ldr	$i1,[$key],#16
 	eor	$s2,$s2,$i3,ror#8
 	ldr	$t1,[$key,#-12]
 	eor	$s3,$s3,$t3,ror#8
@@ -384,11 +333,11 @@ _armv4_AES_encrypt:
 	and	$i2,lr,$s2,lsr#16	@ i1
 	eor	$t3,$i3,$t3,lsl#8
 	and	$i3,lr,$s2
-	ldrb	$i1,[$tbl,$i1,lsl#2]	@ Te4[s2>>8]
 	eor	$s1,$t1,$s1,lsl#24
-	ldrb	$i2,[$tbl,$i2,lsl#2]	@ Te4[s2>>16]
+	ldrb	$i1,[$tbl,$i1,lsl#2]	@ Te4[s2>>8]
 	mov	$s2,$s2,lsr#24

+	ldrb	$i2,[$tbl,$i2,lsl#2]	@ Te4[s2>>16]
 	ldrb	$i3,[$tbl,$i3,lsl#2]	@ Te4[s2>>0]
 	eor	$s0,$i1,$s0,lsl#8
 	ldrb	$s2,[$tbl,$s2,lsl#2]	@ Te4[s2>>24]
@@ -397,15 +346,15 @@ _armv4_AES_encrypt:
 	and	$i2,lr,$s3,lsr#8	@ i1
 	eor	$t3,$i3,$t3,lsl#8
 	and	$i3,lr,$s3,lsr#16	@ i2
-	ldrb	$i1,[$tbl,$i1,lsl#2]	@ Te4[s3>>0]
 	eor	$s2,$t2,$s2,lsl#24
-	ldrb	$i2,[$tbl,$i2,lsl#2]	@ Te4[s3>>8]
+	ldrb	$i1,[$tbl,$i1,lsl#2]	@ Te4[s3>>0]
 	mov	$s3,$s3,lsr#24

+	ldrb	$i2,[$tbl,$i2,lsl#2]	@ Te4[s3>>8]
 	ldrb	$i3,[$tbl,$i3,lsl#2]	@ Te4[s3>>16]
 	eor	$s0,$i1,$s0,lsl#8
-	ldr	$i1,[$key,#0]
 	ldrb	$s3,[$tbl,$s3,lsl#2]	@ Te4[s3>>24]
+	ldr	$i1,[$key,#0]
 	eor	$s1,$s1,$i2,lsl#8
 	ldr	$t1,[$key,#4]
 	eor	$s2,$s2,$i3,lsl#16
@@ -422,26 +371,15 @@ _armv4_AES_encrypt:
 	ldr	pc,[sp],#4		@ pop and return
 .size	_armv4_AES_encrypt,.-_armv4_AES_encrypt

-.global private_AES_set_encrypt_key
-.type   private_AES_set_encrypt_key,%function
+.global AES_set_encrypt_key
+.type   AES_set_encrypt_key,%function
 .align	5
-private_AES_set_encrypt_key:
-_armv4_AES_set_encrypt_key:
-#if __ARM_ARCH__<7
+AES_set_encrypt_key:
 	sub	r3,pc,#8		@ AES_set_encrypt_key
-#else
-	adr	r3,private_AES_set_encrypt_key
-#endif
 	teq	r0,#0
-#if __ARM_ARCH__>=7
-	itt	eq			@ Thumb2 thing, sanity check in ARM
-#endif
 	moveq	r0,#-1
 	beq	.Labrt
 	teq	r2,#0
-#if __ARM_ARCH__>=7
-	itt	eq			@ Thumb2 thing, sanity check in ARM
-#endif
 	moveq	r0,#-1
 	beq	.Labrt

@@ -450,20 +388,16 @@ _armv4_AES_set_encrypt_key:
 	teq	r1,#192
 	beq	.Lok
 	teq	r1,#256
-#if __ARM_ARCH__>=7
-	itt	ne			@ Thumb2 thing, sanity check in ARM
-#endif
 	movne	r0,#-1
 	bne	.Labrt

 .Lok:	stmdb   sp!,{r4-r12,lr}
-	sub	$tbl,r3,#_armv4_AES_set_encrypt_key-AES_Te-1024	@ Te4
+	sub	$tbl,r3,#AES_set_encrypt_key-AES_Te-1024	@ Te4

 	mov	$rounds,r0		@ inp
 	mov	lr,r1			@ bits
 	mov	$key,r2			@ key

-#if __ARM_ARCH__<7
 	ldrb	$s0,[$rounds,#3]	@ load input data in endian-neutral
 	ldrb	$t1,[$rounds,#2]	@ manner...
 	ldrb	$t2,[$rounds,#1]
@@ -496,22 +430,6 @@ _armv4_AES_set_encrypt_key:
 	orr	$s3,$s3,$t3,lsl#24
 	str	$s2,[$key,#-8]
 	str	$s3,[$key,#-4]
-#else
-	ldr	$s0,[$rounds,#0]
-	ldr	$s1,[$rounds,#4]
-	ldr	$s2,[$rounds,#8]
-	ldr	$s3,[$rounds,#12]
-#ifdef __ARMEL__
-	rev	$s0,$s0
-	rev	$s1,$s1
-	rev	$s2,$s2
-	rev	$s3,$s3
-#endif
-	str	$s0,[$key],#16
-	str	$s1,[$key,#-12]
-	str	$s2,[$key,#-8]
-	str	$s3,[$key,#-4]
-#endif

 	teq	lr,#128
 	bne	.Lnot128
@@ -548,7 +466,6 @@ _armv4_AES_set_encrypt_key:
 	b	.Ldone

 .Lnot128:
-#if __ARM_ARCH__<7
 	ldrb	$i2,[$rounds,#19]
 	ldrb	$t1,[$rounds,#18]
 	ldrb	$t2,[$rounds,#17]
@@ -565,16 +482,6 @@ _armv4_AES_set_encrypt_key:
 	str	$i2,[$key],#8
 	orr	$i3,$i3,$t3,lsl#24
 	str	$i3,[$key,#-4]
-#else
-	ldr	$i2,[$rounds,#16]
-	ldr	$i3,[$rounds,#20]
-#ifdef __ARMEL__
-	rev	$i2,$i2
-	rev	$i3,$i3
-#endif
-	str	$i2,[$key],#8
-	str	$i3,[$key,#-4]
-#endif

 	teq	lr,#192
 	bne	.Lnot192
@@ -607,9 +514,6 @@ _armv4_AES_set_encrypt_key:
 	str	$s2,[$key,#-16]
 	subs	$rounds,$rounds,#1
 	str	$s3,[$key,#-12]
-#if __ARM_ARCH__>=7
-	itt	eq				@ Thumb2 thing, sanity check in ARM
-#endif
 	subeq	r2,$key,#216
 	beq	.Ldone

@@ -622,7 +526,6 @@ _armv4_AES_set_encrypt_key:
 	b	.L192_loop

 .Lnot192:
-#if __ARM_ARCH__<7
 	ldrb	$i2,[$rounds,#27]
 	ldrb	$t1,[$rounds,#26]
 	ldrb	$t2,[$rounds,#25]
@@ -639,16 +542,6 @@ _armv4_AES_set_encrypt_key:
 	str	$i2,[$key],#8
 	orr	$i3,$i3,$t3,lsl#24
 	str	$i3,[$key,#-4]
-#else
-	ldr	$i2,[$rounds,#24]
-	ldr	$i3,[$rounds,#28]
-#ifdef __ARMEL__
-	rev	$i2,$i2
-	rev	$i3,$i3
-#endif
-	str	$i2,[$key],#8
-	str	$i3,[$key,#-4]
-#endif

 	mov	$rounds,#14
 	str	$rounds,[$key,#240-32]
@@ -679,9 +572,6 @@ _armv4_AES_set_encrypt_key:
 	str	$s2,[$key,#-24]
 	subs	$rounds,$rounds,#1
 	str	$s3,[$key,#-20]
-#if __ARM_ARCH__>=7
-	itt	eq				@ Thumb2 thing, sanity check in ARM
-#endif
 	subeq	r2,$key,#256
 	beq	.Ldone

@@ -711,77 +601,48 @@ _armv4_AES_set_encrypt_key:
 	str	$i3,[$key,#-4]
 	b	.L256_loop

-.align	2
 .Ldone:	mov	r0,#0
 	ldmia   sp!,{r4-r12,lr}
-.Labrt:
-#if __ARM_ARCH__>=5
-	ret				@ bx lr
-#else
-	tst	lr,#1
+.Labrt:	tst	lr,#1
 	moveq	pc,lr			@ be binary compatible with V4, yet
 	bx	lr			@ interoperable with Thumb ISA:-)
-#endif
-.size	private_AES_set_encrypt_key,.-private_AES_set_encrypt_key
+.size	AES_set_encrypt_key,.-AES_set_encrypt_key

-.global private_AES_set_decrypt_key
-.type   private_AES_set_decrypt_key,%function
+.global AES_set_decrypt_key
+.type   AES_set_decrypt_key,%function
 .align	5
-private_AES_set_decrypt_key:
+AES_set_decrypt_key:
 	str	lr,[sp,#-4]!            @ push lr
-	bl	_armv4_AES_set_encrypt_key
+	bl	AES_set_encrypt_key
 	teq	r0,#0
-	ldr	lr,[sp],#4              @ pop lr
+	ldrne	lr,[sp],#4              @ pop lr
 	bne	.Labrt

-	mov	r0,r2			@ AES_set_encrypt_key preserves r2,
-	mov	r1,r2			@ which is AES_KEY *key
-	b	_armv4_AES_set_enc2dec_key
-.size	private_AES_set_decrypt_key,.-private_AES_set_decrypt_key
+	stmdb   sp!,{r4-r12}

-@ void AES_set_enc2dec_key(const AES_KEY *inp,AES_KEY *out)
-.global	AES_set_enc2dec_key
-.type	AES_set_enc2dec_key,%function
-.align	5
-AES_set_enc2dec_key:
-_armv4_AES_set_enc2dec_key:
-	stmdb   sp!,{r4-r12,lr}
+	ldr	$rounds,[r2,#240]	@ AES_set_encrypt_key preserves r2,
+	mov	$key,r2			@ which is AES_KEY *key
+	mov	$i1,r2
+	add	$i2,r2,$rounds,lsl#4

-	ldr	$rounds,[r0,#240]
-	mov	$i1,r0			@ input
-	add	$i2,r0,$rounds,lsl#4
-	mov	$key,r1			@ ouput
-	add	$tbl,r1,$rounds,lsl#4
-	str	$rounds,[r1,#240]
-
-.Linv:	ldr	$s0,[$i1],#16
-	ldr	$s1,[$i1,#-12]
-	ldr	$s2,[$i1,#-8]
-	ldr	$s3,[$i1,#-4]
-	ldr	$t1,[$i2],#-16
-	ldr	$t2,[$i2,#16+4]
-	ldr	$t3,[$i2,#16+8]
-	ldr	$i3,[$i2,#16+12]
-	str	$s0,[$tbl],#-16
-	str	$s1,[$tbl,#16+4]
-	str	$s2,[$tbl,#16+8]
-	str	$s3,[$tbl,#16+12]
-	str	$t1,[$key],#16
-	str	$t2,[$key,#-12]
-	str	$t3,[$key,#-8]
-	str	$i3,[$key,#-4]
-	teq	$i1,$i2
-	bne	.Linv
-
-	ldr	$s0,[$i1]
+.Linv:	ldr	$s0,[$i1]
 	ldr	$s1,[$i1,#4]
 	ldr	$s2,[$i1,#8]
 	ldr	$s3,[$i1,#12]
-	str	$s0,[$key]
-	str	$s1,[$key,#4]
-	str	$s2,[$key,#8]
-	str	$s3,[$key,#12]
-	sub	$key,$key,$rounds,lsl#3
+	ldr	$t1,[$i2]
+	ldr	$t2,[$i2,#4]
+	ldr	$t3,[$i2,#8]
+	ldr	$i3,[$i2,#12]
+	str	$s0,[$i2],#-16
+	str	$s1,[$i2,#16+4]
+	str	$s2,[$i2,#16+8]
+	str	$s3,[$i2,#16+12]
+	str	$t1,[$i1],#16
+	str	$t2,[$i1,#-12]
+	str	$t3,[$i1,#-8]
+	str	$i3,[$i1,#-4]
+	teq	$i1,$i2
+	bne	.Linv
 ___
 $mask80=$i1;
 $mask1b=$i2;
@@ -831,15 +692,11 @@ $code.=<<___;
 	bne	.Lmix

 	mov	r0,#0
-#if __ARM_ARCH__>=5
-	ldmia	sp!,{r4-r12,pc}
-#else
 	ldmia   sp!,{r4-r12,lr}
 	tst	lr,#1
 	moveq	pc,lr			@ be binary compatible with V4, yet
 	bx	lr			@ interoperable with Thumb ISA:-)
-#endif
-.size	AES_set_enc2dec_key,.-AES_set_enc2dec_key
+.size	AES_set_decrypt_key,.-AES_set_decrypt_key

 .type	AES_Td,%object
 .align	5
@@ -949,16 +806,12 @@ AES_Td:
 .type   AES_decrypt,%function
 .align	5
 AES_decrypt:
-#if __ARM_ARCH__<7
 	sub	r3,pc,#8		@ AES_decrypt
-#else
-	adr	r3,AES_decrypt
-#endif
 	stmdb   sp!,{r1,r4-r12,lr}
 	mov	$rounds,r0		@ inp
 	mov	$key,r2
 	sub	$tbl,r3,#AES_decrypt-AES_Td		@ Td
-#if __ARM_ARCH__<7
+
 	ldrb	$s0,[$rounds,#3]	@ load input data in endian-neutral
 	ldrb	$t1,[$rounds,#2]	@ manner...
 	ldrb	$t2,[$rounds,#1]
@@ -987,33 +840,10 @@ AES_decrypt:
 	orr	$s3,$s3,$t1,lsl#8
 	orr	$s3,$s3,$t2,lsl#16
 	orr	$s3,$s3,$t3,lsl#24
-#else
-	ldr	$s0,[$rounds,#0]
-	ldr	$s1,[$rounds,#4]
-	ldr	$s2,[$rounds,#8]
-	ldr	$s3,[$rounds,#12]
-#ifdef __ARMEL__
-	rev	$s0,$s0
-	rev	$s1,$s1
-	rev	$s2,$s2
-	rev	$s3,$s3
-#endif
-#endif
+
 	bl	_armv4_AES_decrypt

 	ldr	$rounds,[sp],#4		@ pop out
-#if __ARM_ARCH__>=7
-#ifdef __ARMEL__
-	rev	$s0,$s0
-	rev	$s1,$s1
-	rev	$s2,$s2
-	rev	$s3,$s3
-#endif
-	str	$s0,[$rounds,#0]
-	str	$s1,[$rounds,#4]
-	str	$s2,[$rounds,#8]
-	str	$s3,[$rounds,#12]
-#else
 	mov	$t1,$s0,lsr#24		@ write output in endian-neutral
 	mov	$t2,$s0,lsr#16		@ manner...
 	mov	$t3,$s0,lsr#8
@@ -1042,15 +872,11 @@ AES_decrypt:
 	strb	$t2,[$rounds,#13]
 	strb	$t3,[$rounds,#14]
 	strb	$s3,[$rounds,#15]
-#endif
-#if __ARM_ARCH__>=5
-	ldmia	sp!,{r4-r12,pc}
-#else
+
 	ldmia   sp!,{r4-r12,lr}
 	tst	lr,#1
 	moveq	pc,lr			@ be binary compatible with V4, yet
 	bx	lr			@ interoperable with Thumb ISA:-)
-#endif
 .size	AES_decrypt,.-AES_decrypt

 .type   _armv4_AES_decrypt,%function
@@ -1090,11 +916,11 @@ _armv4_AES_decrypt:
 	and	$i2,lr,$s2		@ i1
 	eor	$t3,$i3,$t3,ror#8
 	and	$i3,lr,$s2,lsr#16
-	ldr	$i1,[$tbl,$i1,lsl#2]	@ Td2[s2>>8]
 	eor	$s1,$s1,$t1,ror#8
-	ldr	$i2,[$tbl,$i2,lsl#2]	@ Td3[s2>>0]
+	ldr	$i1,[$tbl,$i1,lsl#2]	@ Td2[s2>>8]
 	mov	$s2,$s2,lsr#24

+	ldr	$i2,[$tbl,$i2,lsl#2]	@ Td3[s2>>0]
 	ldr	$i3,[$tbl,$i3,lsl#2]	@ Td1[s2>>16]
 	eor	$s0,$s0,$i1,ror#16
 	ldr	$s2,[$tbl,$s2,lsl#2]	@ Td0[s2>>24]
@@ -1103,22 +929,22 @@ _armv4_AES_decrypt:
 	and	$i2,lr,$s3,lsr#8	@ i1
 	eor	$t3,$i3,$t3,ror#8
 	and	$i3,lr,$s3		@ i2
-	ldr	$i1,[$tbl,$i1,lsl#2]	@ Td1[s3>>16]
 	eor	$s2,$s2,$t2,ror#8
-	ldr	$i2,[$tbl,$i2,lsl#2]	@ Td2[s3>>8]
+	ldr	$i1,[$tbl,$i1,lsl#2]	@ Td1[s3>>16]
 	mov	$s3,$s3,lsr#24

+	ldr	$i2,[$tbl,$i2,lsl#2]	@ Td2[s3>>8]
 	ldr	$i3,[$tbl,$i3,lsl#2]	@ Td3[s3>>0]
 	eor	$s0,$s0,$i1,ror#8
-	ldr	$i1,[$key],#16
-	eor	$s1,$s1,$i2,ror#16
 	ldr	$s3,[$tbl,$s3,lsl#2]	@ Td0[s3>>24]
+	eor	$s1,$s1,$i2,ror#16
 	eor	$s2,$s2,$i3,ror#24
+	ldr	$i1,[$key],#16
+	eor	$s3,$s3,$t3,ror#8

 	ldr	$t1,[$key,#-12]
-	eor	$s0,$s0,$i1
 	ldr	$t2,[$key,#-8]
-	eor	$s3,$s3,$t3,ror#8
+	eor	$s0,$s0,$i1
 	ldr	$t3,[$key,#-4]
 	and	$i1,lr,$s0,lsr#16
 	eor	$s1,$s1,$t1
@@ -1150,9 +976,8 @@ _armv4_AES_decrypt:
 	ldrb	$t3,[$tbl,$i3]		@ Td4[s0>>0]
 	and	$i3,lr,$s1,lsr#8

-	add	$s1,$tbl,$s1,lsr#24
 	ldrb	$i1,[$tbl,$i1]		@ Td4[s1>>0]
-	ldrb	$s1,[$s1]		@ Td4[s1>>24]
+	ldrb	$s1,[$tbl,$s1,lsr#24]	@ Td4[s1>>24]
 	ldrb	$i2,[$tbl,$i2]		@ Td4[s1>>16]
 	eor	$s0,$i1,$s0,lsl#24
 	ldrb	$i3,[$tbl,$i3]		@ Td4[s1>>8]
@@ -1160,27 +985,25 @@ _armv4_AES_decrypt:
 	and	$i1,lr,$s2,lsr#8	@ i0
 	eor	$t2,$t2,$i2,lsl#8
 	and	$i2,lr,$s2		@ i1
-	ldrb	$i1,[$tbl,$i1]		@ Td4[s2>>8]
 	eor	$t3,$t3,$i3,lsl#8
-	ldrb	$i2,[$tbl,$i2]		@ Td4[s2>>0]
+	ldrb	$i1,[$tbl,$i1]		@ Td4[s2>>8]
 	and	$i3,lr,$s2,lsr#16

-	add	$s2,$tbl,$s2,lsr#24
-	ldrb	$s2,[$s2]		@ Td4[s2>>24]
+	ldrb	$i2,[$tbl,$i2]		@ Td4[s2>>0]
+	ldrb	$s2,[$tbl,$s2,lsr#24]	@ Td4[s2>>24]
 	eor	$s0,$s0,$i1,lsl#8
 	ldrb	$i3,[$tbl,$i3]		@ Td4[s2>>16]
 	eor	$s1,$i2,$s1,lsl#16
 	and	$i1,lr,$s3,lsr#16	@ i0
 	eor	$s2,$t2,$s2,lsl#16
 	and	$i2,lr,$s3,lsr#8	@ i1
-	ldrb	$i1,[$tbl,$i1]		@ Td4[s3>>16]
 	eor	$t3,$t3,$i3,lsl#16
-	ldrb	$i2,[$tbl,$i2]		@ Td4[s3>>8]
+	ldrb	$i1,[$tbl,$i1]		@ Td4[s3>>16]
 	and	$i3,lr,$s3		@ i2

-	add	$s3,$tbl,$s3,lsr#24
+	ldrb	$i2,[$tbl,$i2]		@ Td4[s3>>8]
 	ldrb	$i3,[$tbl,$i3]		@ Td4[s3>>0]
-	ldrb	$s3,[$s3]		@ Td4[s3>>24]
+	ldrb	$s3,[$tbl,$s3,lsr#24]	@ Td4[s3>>24]
 	eor	$s0,$s0,$i1,lsl#16
 	ldr	$i1,[$key,#0]
 	eor	$s1,$s1,$i2,lsl#8
@@ -1203,15 +1026,5 @@ _armv4_AES_decrypt:
 ___

 $code =~ s/\bbx\s+lr\b/.word\t0xe12fff1e/gm;	# make it possible to compile with -march=armv4
-$code =~ s/\bret\b/bx\tlr/gm;
-
-open SELF,$0;
-while(<SELF>) {
-	next if (/^#!/);
-	last if (!s/^#/@/ and !/^$/);
-	print;
-}
-close SELF;
-
 print $code;
 close STDOUT;	# enforce flush
--- a/crypto/aes/asm/aes-mips.pl
+++ b/crypto/aes/asm/aes-mips.pl
--- a/crypto/aes/asm/aes-parisc.pl
+++ b/crypto/aes/asm/aes-parisc.pl
--- a/crypto/aes/asm/aes-ppc.pl
+++ b/crypto/aes/asm/aes-ppc.pl
--- a/crypto/aes/asm/aes-s390x.pl
+++ b/crypto/aes/asm/aes-s390x.pl
--- a/crypto/aes/asm/aes-x86_64.pl
+++ b/crypto/aes/asm/aes-x86_64.pl
@@ -19,10 +19,9 @@
 # Performance in number of cycles per processed byte for 128-bit key:
 #
 #		ECB encrypt	ECB decrypt	CBC large chunk
-# AMD64		33		43		13.0
-# EM64T		38		56		18.6(*)
-# Core 2	30		42		14.5(*)
-# Atom		65		86		32.1(*)
+# AMD64		33		41		13.0
+# EM64T		38		59		18.6(*)
+# Core 2	30		43		14.5(*)
 #
 # (*) with hyper-threading off

@@ -367,66 +366,68 @@ $code.=<<___;
 	movzb	`&lo("$s0")`,$t0
 	movzb	`&lo("$s1")`,$t1
 	movzb	`&lo("$s2")`,$t2
-	movzb	`&lo("$s3")`,$t3
-	movzb	`&hi("$s1")`,$acc0
-	movzb	`&hi("$s2")`,$acc1
-	shr	\$16,$s2
-	movzb	`&hi("$s3")`,$acc2
 	movzb	($sbox,$t0,1),$t0
 	movzb	($sbox,$t1,1),$t1
 	movzb	($sbox,$t2,1),$t2
-	movzb	($sbox,$t3,1),$t3

+	movzb	`&lo("$s3")`,$t3
+	movzb	`&hi("$s1")`,$acc0
+	movzb	`&hi("$s2")`,$acc1
+	movzb	($sbox,$t3,1),$t3
 	movzb	($sbox,$acc0,1),$t4	#$t0
-	movzb	`&hi("$s0")`,$acc0
 	movzb	($sbox,$acc1,1),$t5	#$t1
-	movzb	`&lo("$s2")`,$acc1
+
+	movzb	`&hi("$s3")`,$acc2
+	movzb	`&hi("$s0")`,$acc0
+	shr	\$16,$s2
 	movzb	($sbox,$acc2,1),$acc2	#$t2
 	movzb	($sbox,$acc0,1),$acc0	#$t3
-
-	shl	\$8,$t4
 	shr	\$16,$s3
+
+	movzb	`&lo("$s2")`,$acc1
+	shl	\$8,$t4
 	shl	\$8,$t5
-	xor	$t4,$t0
-	shr	\$16,$s0
-	movzb	`&lo("$s3")`,$t4
-	shr	\$16,$s1
-	xor	$t5,$t1
-	shl	\$8,$acc2
-	movzb	`&lo("$s0")`,$t5
 	movzb	($sbox,$acc1,1),$acc1	#$t0
-	xor	$acc2,$t2
+	xor	$t4,$t0
+	xor	$t5,$t1

+	movzb	`&lo("$s3")`,$t4
+	shr	\$16,$s0
+	shr	\$16,$s1
+	movzb	`&lo("$s0")`,$t5
+	shl	\$8,$acc2
 	shl	\$8,$acc0
-	movzb	`&lo("$s1")`,$acc2
-	shl	\$16,$acc1
-	xor	$acc0,$t3
 	movzb	($sbox,$t4,1),$t4	#$t1
-	movzb	`&hi("$s3")`,$acc0
 	movzb	($sbox,$t5,1),$t5	#$t2
-	xor	$acc1,$t0
+	xor	$acc2,$t2
+	xor	$acc0,$t3

-	shr	\$8,$s2
-	movzb	`&hi("$s0")`,$acc1
-	shl	\$16,$t4
-	shr	\$8,$s1
-	shl	\$16,$t5
-	xor	$t4,$t1
+	movzb	`&lo("$s1")`,$acc2
+	movzb	`&hi("$s3")`,$acc0
+	shl	\$16,$acc1
 	movzb	($sbox,$acc2,1),$acc2	#$t3
 	movzb	($sbox,$acc0,1),$acc0	#$t0
+	xor	$acc1,$t0
+
+	movzb	`&hi("$s0")`,$acc1
+	shr	\$8,$s2
+	shr	\$8,$s1
 	movzb	($sbox,$acc1,1),$acc1	#$t1
 	movzb	($sbox,$s2,1),$s3	#$t3
 	movzb	($sbox,$s1,1),$s2	#$t2
-
+	shl	\$16,$t4
+	shl	\$16,$t5
 	shl	\$16,$acc2
+	xor	$t4,$t1
 	xor	$t5,$t2
-	shl	\$24,$acc0
 	xor	$acc2,$t3
+
+	shl	\$24,$acc0
 	shl	\$24,$acc1
-	xor	$acc0,$t0
 	shl	\$24,$s3
-	xor	$acc1,$t1
+	xor	$acc0,$t0
 	shl	\$24,$s2
+	xor	$acc1,$t1
 	mov	$t0,$s0
 	mov	$t1,$s1
 	xor	$t2,$s2
@@ -465,12 +466,12 @@ sub enctransform()
 { my ($t3,$r20,$r21)=($acc2,"%r8d","%r9d");

 $code.=<<___;
-	mov	\$0x80808080,$t0
-	mov	\$0x80808080,$t1
-	and	$s0,$t0
-	and	$s1,$t1
-	mov	$t0,$acc0
-	mov	$t1,$acc1
+	mov	$s0,$acc0
+	mov	$s1,$acc1
+	and	\$0x80808080,$acc0
+	and	\$0x80808080,$acc1
+	mov	$acc0,$t0
+	mov	$acc1,$t1
 	shr	\$7,$t0
 	lea	($s0,$s0),$r20
 	shr	\$7,$t1
@@ -488,25 +489,25 @@ $code.=<<___;

 	xor	$r20,$s0
 	xor	$r21,$s1
-	 mov	\$0x80808080,$t2
+	 mov	$s2,$acc0
+	 mov	$s3,$acc1
 	rol	\$24,$s0
-	 mov	\$0x80808080,$t3
 	rol	\$24,$s1
-	 and	$s2,$t2
-	 and	$s3,$t3
+	 and	\$0x80808080,$acc0
+	 and	\$0x80808080,$acc1
 	xor	$r20,$s0
 	xor	$r21,$s1
-	 mov	$t2,$acc0
+	 mov	$acc0,$t2
+	 mov	$acc1,$t3
 	ror	\$16,$t0
-	 mov	$t3,$acc1
 	ror	\$16,$t1
-	 lea	($s2,$s2),$r20
 	 shr	\$7,$t2
+	 lea	($s2,$s2),$r20
 	xor	$t0,$s0
-	 shr	\$7,$t3
 	xor	$t1,$s1
-	ror	\$8,$t0
+	 shr	\$7,$t3
 	 lea	($s3,$s3),$r21
+	ror	\$8,$t0
 	ror	\$8,$t1
 	 sub	$t2,$acc0
 	 sub	$t3,$acc1
@@ -522,23 +523,23 @@ $code.=<<___;
 	xor	$acc0,$r20
 	xor	$acc1,$r21

-	ror	\$16,$t2
 	xor	$r20,$s2
-	ror	\$16,$t3
 	xor	$r21,$s3
 	rol	\$24,$s2
-	mov	0($sbox),$acc0			# prefetch Te4
 	rol	\$24,$s3
 	xor	$r20,$s2
-	mov	64($sbox),$acc1
 	xor	$r21,$s3
-	mov	128($sbox),$r20
+	mov	0($sbox),$acc0			# prefetch Te4
+	ror	\$16,$t2
+	ror	\$16,$t3
+	mov	64($sbox),$acc1
 	xor	$t2,$s2
-	ror	\$8,$t2
 	xor	$t3,$s3
+	mov	128($sbox),$r20
+	ror	\$8,$t2
 	ror	\$8,$t3
-	xor	$t2,$s2
 	mov	192($sbox),$r21
+	xor	$t2,$s2
 	xor	$t3,$s3
 ___
 }
@@ -588,9 +589,6 @@ $code.=<<___;
 .globl	AES_encrypt
 .type	AES_encrypt,\@function,3
 .align	16
-.globl	asm_AES_encrypt
-.hidden	asm_AES_encrypt
-asm_AES_encrypt:
 AES_encrypt:
 	push	%rbx
 	push	%rbp
@@ -935,69 +933,70 @@ $code.=<<___;
 	movzb	`&lo("$s0")`,$t0
 	movzb	`&lo("$s1")`,$t1
 	movzb	`&lo("$s2")`,$t2
-	movzb	`&lo("$s3")`,$t3
-	movzb	`&hi("$s3")`,$acc0
-	movzb	`&hi("$s0")`,$acc1
-	shr	\$16,$s3
-	movzb	`&hi("$s1")`,$acc2
 	movzb	($sbox,$t0,1),$t0
 	movzb	($sbox,$t1,1),$t1
 	movzb	($sbox,$t2,1),$t2
-	movzb	($sbox,$t3,1),$t3

+	movzb	`&lo("$s3")`,$t3
+	movzb	`&hi("$s3")`,$acc0
+	movzb	`&hi("$s0")`,$acc1
+	movzb	($sbox,$t3,1),$t3
 	movzb	($sbox,$acc0,1),$t4	#$t0
-	movzb	`&hi("$s2")`,$acc0
 	movzb	($sbox,$acc1,1),$t5	#$t1
+
+	movzb	`&hi("$s1")`,$acc2
+	movzb	`&hi("$s2")`,$acc0
+	shr	\$16,$s2
 	movzb	($sbox,$acc2,1),$acc2	#$t2
 	movzb	($sbox,$acc0,1),$acc0	#$t3
+	shr	\$16,$s3

-	shr	\$16,$s2
-	shl	\$8,$t5
-	shl	\$8,$t4
 	movzb	`&lo("$s2")`,$acc1
-	shr	\$16,$s0
-	xor	$t4,$t0
-	shr	\$16,$s1
-	movzb	`&lo("$s3")`,$t4
-
-	shl	\$8,$acc2
-	xor	$t5,$t1
-	shl	\$8,$acc0
-	movzb	`&lo("$s0")`,$t5
+	shl	\$8,$t4
+	shl	\$8,$t5
 	movzb	($sbox,$acc1,1),$acc1	#$t0
-	xor	$acc2,$t2
-	movzb	`&lo("$s1")`,$acc2
+	xor	$t4,$t0
+	xor	$t5,$t1

-	shl	\$16,$acc1
-	xor	$acc0,$t3
+	movzb	`&lo("$s3")`,$t4
+	shr	\$16,$s0
+	shr	\$16,$s1
+	movzb	`&lo("$s0")`,$t5
+	shl	\$8,$acc2
+	shl	\$8,$acc0
 	movzb	($sbox,$t4,1),$t4	#$t1
-	movzb	`&hi("$s1")`,$acc0
-	movzb	($sbox,$acc2,1),$acc2	#$t3
-	xor	$acc1,$t0
 	movzb	($sbox,$t5,1),$t5	#$t2
-	movzb	`&hi("$s2")`,$acc1
+	xor	$acc2,$t2
+	xor	$acc0,$t3

-	shl	\$16,$acc2
+	movzb	`&lo("$s1")`,$acc2
+	movzb	`&hi("$s1")`,$acc0
+	shl	\$16,$acc1
+	movzb	($sbox,$acc2,1),$acc2	#$t3
+	movzb	($sbox,$acc0,1),$acc0	#$t0
+	xor	$acc1,$t0
+
+	movzb	`&hi("$s2")`,$acc1
 	shl	\$16,$t4
 	shl	\$16,$t5
-	xor	$acc2,$t3
-	movzb	`&hi("$s3")`,$acc2
+	movzb	($sbox,$acc1,1),$s1	#$t1
 	xor	$t4,$t1
-	shr	\$8,$s0
 	xor	$t5,$t2

-	movzb	($sbox,$acc0,1),$acc0	#$t0
-	movzb	($sbox,$acc1,1),$s1	#$t1
-	movzb	($sbox,$acc2,1),$s2	#$t2
+	movzb	`&hi("$s3")`,$acc1
+	shr	\$8,$s0
+	shl	\$16,$acc2
+	movzb	($sbox,$acc1,1),$s2	#$t2
 	movzb	($sbox,$s0,1),$s3	#$t3
+	xor	$acc2,$t3

-	mov	$t0,$s0
 	shl	\$24,$acc0
 	shl	\$24,$s1
 	shl	\$24,$s2
-	xor	$acc0,$s0
+	xor	$acc0,$t0
 	shl	\$24,$s3
 	xor	$t1,$s1
+	mov	$t0,$s0
 	xor	$t2,$s2
 	xor	$t3,$s3
 ___
@@ -1012,12 +1011,12 @@ sub dectransform()
  my $prefetch = shift;

 $code.=<<___;
-	mov	$mask80,$tp40
-	mov	$mask80,$tp48
-	and	$tp10,$tp40
-	and	$tp18,$tp48
-	mov	$tp40,$acc0
-	mov	$tp48,$acc8
+	mov	$tp10,$acc0
+	mov	$tp18,$acc8
+	and	$mask80,$acc0
+	and	$mask80,$acc8
+	mov	$acc0,$tp40
+	mov	$acc8,$tp48
 	shr	\$7,$tp40
 	lea	($tp10,$tp10),$tp20
 	shr	\$7,$tp48
@@ -1028,15 +1027,15 @@ $code.=<<___;
 	and	$maskfe,$tp28
 	and	$mask1b,$acc0
 	and	$mask1b,$acc8
-	xor	$acc0,$tp20
-	xor	$acc8,$tp28
-	mov	$mask80,$tp80
-	mov	$mask80,$tp88
+	xor	$tp20,$acc0
+	xor	$tp28,$acc8
+	mov	$acc0,$tp20
+	mov	$acc8,$tp28

-	and	$tp20,$tp80
-	and	$tp28,$tp88
-	mov	$tp80,$acc0
-	mov	$tp88,$acc8
+	and	$mask80,$acc0
+	and	$mask80,$acc8
+	mov	$acc0,$tp80
+	mov	$acc8,$tp88
 	shr	\$7,$tp80
 	lea	($tp20,$tp20),$tp40
 	shr	\$7,$tp88
@@ -1047,15 +1046,15 @@ $code.=<<___;
 	and	$maskfe,$tp48
 	and	$mask1b,$acc0
 	and	$mask1b,$acc8
-	xor	$acc0,$tp40
-	xor	$acc8,$tp48
-	mov	$mask80,$tp80
-	mov	$mask80,$tp88
+	xor	$tp40,$acc0
+	xor	$tp48,$acc8
+	mov	$acc0,$tp40
+	mov	$acc8,$tp48

-	and	$tp40,$tp80
-	and	$tp48,$tp88
-	mov	$tp80,$acc0
-	mov	$tp88,$acc8
+	and	$mask80,$acc0
+	and	$mask80,$acc8
+	mov	$acc0,$tp80
+	mov	$acc8,$tp88
 	shr	\$7,$tp80
 	 xor	$tp10,$tp20		# tp2^=tp1
 	shr	\$7,$tp88
@@ -1080,51 +1079,51 @@ $code.=<<___;
 	mov	$tp10,$acc0
 	mov	$tp18,$acc8
 	xor	$tp80,$tp40		# tp4^tp1^=tp8
-	shr	\$32,$acc0
 	xor	$tp88,$tp48		# tp4^tp1^=tp8
+	shr	\$32,$acc0
 	shr	\$32,$acc8
 	xor	$tp20,$tp80		# tp8^=tp8^tp2^tp1=tp2^tp1
-	rol	\$8,`&LO("$tp10")`	# ROTATE(tp1^tp8,8)
 	xor	$tp28,$tp88		# tp8^=tp8^tp2^tp1=tp2^tp1
+	rol	\$8,`&LO("$tp10")`	# ROTATE(tp1^tp8,8)
 	rol	\$8,`&LO("$tp18")`	# ROTATE(tp1^tp8,8)
 	xor	$tp40,$tp80		# tp2^tp1^=tp8^tp4^tp1=tp8^tp4^tp2
-	rol	\$8,`&LO("$acc0")`	# ROTATE(tp1^tp8,8)
 	xor	$tp48,$tp88		# tp2^tp1^=tp8^tp4^tp1=tp8^tp4^tp2

+	rol	\$8,`&LO("$acc0")`	# ROTATE(tp1^tp8,8)
 	rol	\$8,`&LO("$acc8")`	# ROTATE(tp1^tp8,8)
 	xor	`&LO("$tp80")`,`&LO("$tp10")`
-	shr	\$32,$tp80
 	xor	`&LO("$tp88")`,`&LO("$tp18")`
+	shr	\$32,$tp80
 	shr	\$32,$tp88
 	xor	`&LO("$tp80")`,`&LO("$acc0")`
 	xor	`&LO("$tp88")`,`&LO("$acc8")`

 	mov	$tp20,$tp80
-	rol	\$24,`&LO("$tp20")`	# ROTATE(tp2^tp1^tp8,24)
 	mov	$tp28,$tp88
-	rol	\$24,`&LO("$tp28")`	# ROTATE(tp2^tp1^tp8,24)
 	shr	\$32,$tp80
-	xor	`&LO("$tp20")`,`&LO("$tp10")`
 	shr	\$32,$tp88
-	xor	`&LO("$tp28")`,`&LO("$tp18")`
+	rol	\$24,`&LO("$tp20")`	# ROTATE(tp2^tp1^tp8,24)
+	rol	\$24,`&LO("$tp28")`	# ROTATE(tp2^tp1^tp8,24)
 	rol	\$24,`&LO("$tp80")`	# ROTATE(tp2^tp1^tp8,24)
-	mov	$tp40,$tp20
 	rol	\$24,`&LO("$tp88")`	# ROTATE(tp2^tp1^tp8,24)
+	xor	`&LO("$tp20")`,`&LO("$tp10")`
+	xor	`&LO("$tp28")`,`&LO("$tp18")`
+	mov	$tp40,$tp20
 	mov	$tp48,$tp28
-	shr	\$32,$tp20
 	xor	`&LO("$tp80")`,`&LO("$acc0")`
-	shr	\$32,$tp28
 	xor	`&LO("$tp88")`,`&LO("$acc8")`

 	`"mov	0($sbox),$mask80"	if ($prefetch)`
-	rol	\$16,`&LO("$tp40")`	# ROTATE(tp4^tp1^tp8,16)
+	shr	\$32,$tp20
+	shr	\$32,$tp28
 	`"mov	64($sbox),$maskfe"	if ($prefetch)`
+	rol	\$16,`&LO("$tp40")`	# ROTATE(tp4^tp1^tp8,16)
 	rol	\$16,`&LO("$tp48")`	# ROTATE(tp4^tp1^tp8,16)
 	`"mov	128($sbox),$mask1b"	if ($prefetch)`
 	rol	\$16,`&LO("$tp20")`	# ROTATE(tp4^tp1^tp8,16)
+	rol	\$16,`&LO("$tp28")`	# ROTATE(tp4^tp1^tp8,16)
 	`"mov	192($sbox),$tp80"	if ($prefetch)`
 	xor	`&LO("$tp40")`,`&LO("$tp10")`
-	rol	\$16,`&LO("$tp28")`	# ROTATE(tp4^tp1^tp8,16)
 	xor	`&LO("$tp48")`,`&LO("$tp18")`
 	`"mov	256($sbox),$tp88"	if ($prefetch)`
 	xor	`&LO("$tp20")`,`&LO("$acc0")`
@@ -1186,9 +1185,6 @@ $code.=<<___;
 .globl	AES_decrypt
 .type	AES_decrypt,\@function,3
 .align	16
-.globl	asm_AES_decrypt
-.hidden	asm_AES_decrypt
-asm_AES_decrypt:
 AES_decrypt:
 	push	%rbx
 	push	%rbp
@@ -1282,13 +1278,13 @@ $code.=<<___;
 ___
 }

-# int private_AES_set_encrypt_key(const unsigned char *userKey, const int bits,
+# int AES_set_encrypt_key(const unsigned char *userKey, const int bits,
 #                        AES_KEY *key)
 $code.=<<___;
-.globl	private_AES_set_encrypt_key
-.type	private_AES_set_encrypt_key,\@function,3
+.globl	AES_set_encrypt_key
+.type	AES_set_encrypt_key,\@function,3
 .align	16
-private_AES_set_encrypt_key:
+AES_set_encrypt_key:
 	push	%rbx
 	push	%rbp
 	push	%r12			# redundant, but allows to share 
@@ -1300,12 +1296,16 @@ private_AES_set_encrypt_key:

 	call	_x86_64_AES_set_encrypt_key

+	mov	8(%rsp),%r15
+	mov	16(%rsp),%r14
+	mov	24(%rsp),%r13
+	mov	32(%rsp),%r12
 	mov	40(%rsp),%rbp
 	mov	48(%rsp),%rbx
 	add	\$56,%rsp
 .Lenc_key_epilogue:
 	ret
-.size	private_AES_set_encrypt_key,.-private_AES_set_encrypt_key
+.size	AES_set_encrypt_key,.-AES_set_encrypt_key

 .type	_x86_64_AES_set_encrypt_key,\@abi-omnipotent
 .align	16
@@ -1548,13 +1548,13 @@ $code.=<<___;
 ___
 }

-# int private_AES_set_decrypt_key(const unsigned char *userKey, const int bits,
+# int AES_set_decrypt_key(const unsigned char *userKey, const int bits,
 #                        AES_KEY *key)
 $code.=<<___;
-.globl	private_AES_set_decrypt_key
-.type	private_AES_set_decrypt_key,\@function,3
+.globl	AES_set_decrypt_key
+.type	AES_set_decrypt_key,\@function,3
 .align	16
-private_AES_set_decrypt_key:
+AES_set_decrypt_key:
 	push	%rbx
 	push	%rbp
 	push	%r12
@@ -1623,7 +1623,7 @@ $code.=<<___;
 	add	\$56,%rsp
 .Ldec_key_epilogue:
 	ret
-.size	private_AES_set_decrypt_key,.-private_AES_set_decrypt_key
+.size	AES_set_decrypt_key,.-AES_set_decrypt_key
 ___

 # void AES_cbc_encrypt (const void char *inp, unsigned char *out,
@@ -1649,9 +1649,6 @@ $code.=<<___;
 .type	AES_cbc_encrypt,\@function,6
 .align	16
 .extern	OPENSSL_ia32cap_P
-.globl	asm_AES_cbc_encrypt
-.hidden	asm_AES_cbc_encrypt
-asm_AES_cbc_encrypt:
 AES_cbc_encrypt:
 	cmp	\$0,%rdx	# check length
 	je	.Lcbc_epilogue
@@ -2770,13 +2767,13 @@ cbc_se_handler:
 	.rva	.LSEH_end_AES_decrypt
 	.rva	.LSEH_info_AES_decrypt

-	.rva	.LSEH_begin_private_AES_set_encrypt_key
-	.rva	.LSEH_end_private_AES_set_encrypt_key
-	.rva	.LSEH_info_private_AES_set_encrypt_key
+	.rva	.LSEH_begin_AES_set_encrypt_key
+	.rva	.LSEH_end_AES_set_encrypt_key
+	.rva	.LSEH_info_AES_set_encrypt_key

-	.rva	.LSEH_begin_private_AES_set_decrypt_key
-	.rva	.LSEH_end_private_AES_set_decrypt_key
-	.rva	.LSEH_info_private_AES_set_decrypt_key
+	.rva	.LSEH_begin_AES_set_decrypt_key
+	.rva	.LSEH_end_AES_set_decrypt_key
+	.rva	.LSEH_info_AES_set_decrypt_key

 	.rva	.LSEH_begin_AES_cbc_encrypt
 	.rva	.LSEH_end_AES_cbc_encrypt
@@ -2792,11 +2789,11 @@ cbc_se_handler:
 	.byte	9,0,0,0
 	.rva	block_se_handler
 	.rva	.Ldec_prologue,.Ldec_epilogue	# HandlerData[]
-.LSEH_info_private_AES_set_encrypt_key:
+.LSEH_info_AES_set_encrypt_key:
 	.byte	9,0,0,0
 	.rva	key_se_handler
 	.rva	.Lenc_key_prologue,.Lenc_key_epilogue	# HandlerData[]
-.LSEH_info_private_AES_set_decrypt_key:
+.LSEH_info_AES_set_decrypt_key:
 	.byte	9,0,0,0
 	.rva	key_se_handler
 	.rva	.Ldec_key_prologue,.Ldec_key_epilogue	# HandlerData[]
--- a/crypto/aes/asm/aesni-mb-x86_64.pl
+++ b/crypto/aes/asm/aesni-mb-x86_64.pl
--- a/crypto/aes/asm/aesni-sha1-x86_64.pl
+++ b/crypto/aes/asm/aesni-sha1-x86_64.pl
--- a/crypto/aes/asm/aesni-sha256-x86_64.pl
+++ b/crypto/aes/asm/aesni-sha256-x86_64.pl
--- a/crypto/aes/asm/aesni-x86.pl
+++ b/crypto/aes/asm/aesni-x86.pl
--- a/crypto/aes/asm/aesni-x86_64.pl
+++ b/crypto/aes/asm/aesni-x86_64.pl
--- a/crypto/aes/asm/aesp8-ppc.pl
+++ b/crypto/aes/asm/aesp8-ppc.pl
--- a/crypto/aes/asm/aest4-sparcv9.pl
+++ b/crypto/aes/asm/aest4-sparcv9.pl
@@ -1,919 +0,0 @@
-#!/usr/bin/env perl
-
-# ====================================================================
-# Written by David S. Miller <davem@devemloft.net> and Andy Polyakov
-# <appro@openssl.org>. The module is licensed under 2-clause BSD
-# license. October 2012. All rights reserved.
-# ====================================================================
-
-######################################################################
-# AES for SPARC T4.
-#
-# AES round instructions complete in 3 cycles and can be issued every
-# cycle. It means that round calculations should take 4*rounds cycles,
-# because any given round instruction depends on result of *both*
-# previous instructions:
-#
-#	|0 |1 |2 |3 |4
-#	|01|01|01|
-#	   |23|23|23|
-#	            |01|01|...
-#	               |23|...
-#
-# Provided that fxor [with IV] takes 3 cycles to complete, critical
-# path length for CBC encrypt would be 3+4*rounds, or in other words
-# it should process one byte in at least (3+4*rounds)/16 cycles. This
-# estimate doesn't account for "collateral" instructions, such as
-# fetching input from memory, xor-ing it with zero-round key and
-# storing the result. Yet, *measured* performance [for data aligned
-# at 64-bit boundary!] deviates from this equation by less than 0.5%:
-#
-#		128-bit key	192-		256-
-# CBC encrypt	2.70/2.90(*)	3.20/3.40	3.70/3.90
-#			 (*) numbers after slash are for
-#			     misaligned data.
-#
-# Out-of-order execution logic managed to fully overlap "collateral"
-# instructions with those on critical path. Amazing!
-#
-# As with Intel AES-NI, question is if it's possible to improve
-# performance of parallelizeable modes by interleaving round
-# instructions. Provided round instruction latency and throughput
-# optimal interleave factor is 2. But can we expect 2x performance
-# improvement? Well, as round instructions can be issued one per
-# cycle, they don't saturate the 2-way issue pipeline and therefore
-# there is room for "collateral" calculations... Yet, 2x speed-up
-# over CBC encrypt remains unattaintable:
-#
-#		128-bit key	192-		256-
-# CBC decrypt	1.64/2.11	1.89/2.37	2.23/2.61
-# CTR		1.64/2.08(*)	1.89/2.33	2.23/2.61
-#			 (*) numbers after slash are for
-#			     misaligned data.
-#
-# Estimates based on amount of instructions under assumption that
-# round instructions are not pairable with any other instruction
-# suggest that latter is the actual case and pipeline runs
-# underutilized. It should be noted that T4 out-of-order execution
-# logic is so capable that performance gain from 2x interleave is
-# not even impressive, ~7-13% over non-interleaved code, largest
-# for 256-bit keys.
-
-# To anchor to something else, software implementation processes
-# one byte in 29 cycles with 128-bit key on same processor. Intel
-# Sandy Bridge encrypts byte in 5.07 cycles in CBC mode and decrypts
-# in 0.93, naturally with AES-NI.
-
-$0 =~ m/(.*[\/\\])[^\/\\]+$/; $dir=$1;
-push(@INC,"${dir}","${dir}../../perlasm");
-require "sparcv9_modes.pl";
-
-&asm_init(@ARGV);
-
-$::evp=1;	# if $evp is set to 0, script generates module with
-# AES_[en|de]crypt, AES_set_[en|de]crypt_key and AES_cbc_encrypt entry
-# points. These however are not fully compatible with openssl/aes.h,
-# because they expect AES_KEY to be aligned at 64-bit boundary. When
-# used through EVP, alignment is arranged at EVP layer. Second thing
-# that is arranged by EVP is at least 32-bit alignment of IV.
-
-######################################################################
-# single-round subroutines
-#
-{
-my ($inp,$out,$key,$rounds,$tmp,$mask)=map("%o$_",(0..5));
-
-$code.=<<___ if ($::abibits==64);
-.register	%g2,#scratch
-.register	%g3,#scratch
-
-___
-$code.=<<___;
-.text
-
-.globl	aes_t4_encrypt
-.align	32
-aes_t4_encrypt:
-	andcc		$inp, 7, %g1		! is input aligned?
-	andn		$inp, 7, $inp
-
-	ldx		[$key + 0], %g4
-	ldx		[$key + 8], %g5
-
-	ldx		[$inp + 0], %o4
-	bz,pt		%icc, 1f
-	ldx		[$inp + 8], %o5
-	ldx		[$inp + 16], $inp
-	sll		%g1, 3, %g1
-	sub		%g0, %g1, %o3
-	sllx		%o4, %g1, %o4
-	sllx		%o5, %g1, %g1
-	srlx		%o5, %o3, %o5
-	srlx		$inp, %o3, %o3
-	or		%o5, %o4, %o4
-	or		%o3, %g1, %o5
-1:
-	ld		[$key + 240], $rounds
-	ldd		[$key + 16], %f12
-	ldd		[$key + 24], %f14
-	xor		%g4, %o4, %o4
-	xor		%g5, %o5, %o5
-	movxtod		%o4, %f0
-	movxtod		%o5, %f2
-	srl		$rounds, 1, $rounds
-	ldd		[$key + 32], %f16
-	sub		$rounds, 1, $rounds
-	ldd		[$key + 40], %f18
-	add		$key, 48, $key
-
-.Lenc:
-	aes_eround01	%f12, %f0, %f2, %f4
-	aes_eround23	%f14, %f0, %f2, %f2
-	ldd		[$key + 0], %f12
-	ldd		[$key + 8], %f14
-	sub		$rounds,1,$rounds
-	aes_eround01	%f16, %f4, %f2, %f0
-	aes_eround23	%f18, %f4, %f2, %f2
-	ldd		[$key + 16], %f16
-	ldd		[$key + 24], %f18
-	brnz,pt		$rounds, .Lenc
-	add		$key, 32, $key
-
-	andcc		$out, 7, $tmp		! is output aligned?
-	aes_eround01	%f12, %f0, %f2, %f4
-	aes_eround23	%f14, %f0, %f2, %f2
-	aes_eround01_l	%f16, %f4, %f2, %f0
-	aes_eround23_l	%f18, %f4, %f2, %f2
-
-	bnz,pn		%icc, 2f
-	nop
-
-	std		%f0, [$out + 0]
-	retl
-	std		%f2, [$out + 8]
-
-2:	alignaddrl	$out, %g0, $out
-	mov		0xff, $mask
-	srl		$mask, $tmp, $mask
-
-	faligndata	%f0, %f0, %f4
-	faligndata	%f0, %f2, %f6
-	faligndata	%f2, %f2, %f8
-
-	stda		%f4, [$out + $mask]0xc0	! partial store
-	std		%f6, [$out + 8]
-	add		$out, 16, $out
-	orn		%g0, $mask, $mask
-	retl
-	stda		%f8, [$out + $mask]0xc0	! partial store
-.type	aes_t4_encrypt,#function
-.size	aes_t4_encrypt,.-aes_t4_encrypt
-
-.globl	aes_t4_decrypt
-.align	32
-aes_t4_decrypt:
-	andcc		$inp, 7, %g1		! is input aligned?
-	andn		$inp, 7, $inp
-
-	ldx		[$key + 0], %g4
-	ldx		[$key + 8], %g5
-
-	ldx		[$inp + 0], %o4
-	bz,pt		%icc, 1f
-	ldx		[$inp + 8], %o5
-	ldx		[$inp + 16], $inp
-	sll		%g1, 3, %g1
-	sub		%g0, %g1, %o3
-	sllx		%o4, %g1, %o4
-	sllx		%o5, %g1, %g1
-	srlx		%o5, %o3, %o5
-	srlx		$inp, %o3, %o3
-	or		%o5, %o4, %o4
-	or		%o3, %g1, %o5
-1:
-	ld		[$key + 240], $rounds
-	ldd		[$key + 16], %f12
-	ldd		[$key + 24], %f14
-	xor		%g4, %o4, %o4
-	xor		%g5, %o5, %o5
-	movxtod		%o4, %f0
-	movxtod		%o5, %f2
-	srl		$rounds, 1, $rounds
-	ldd		[$key + 32], %f16
-	sub		$rounds, 1, $rounds
-	ldd		[$key + 40], %f18
-	add		$key, 48, $key
-
-.Ldec:
-	aes_dround01	%f12, %f0, %f2, %f4
-	aes_dround23	%f14, %f0, %f2, %f2
-	ldd		[$key + 0], %f12
-	ldd		[$key + 8], %f14
-	sub		$rounds,1,$rounds
-	aes_dround01	%f16, %f4, %f2, %f0
-	aes_dround23	%f18, %f4, %f2, %f2
-	ldd		[$key + 16], %f16
-	ldd		[$key + 24], %f18
-	brnz,pt		$rounds, .Ldec
-	add		$key, 32, $key
-
-	andcc		$out, 7, $tmp		! is output aligned?
-	aes_dround01	%f12, %f0, %f2, %f4
-	aes_dround23	%f14, %f0, %f2, %f2
-	aes_dround01_l	%f16, %f4, %f2, %f0
-	aes_dround23_l	%f18, %f4, %f2, %f2
-
-	bnz,pn		%icc, 2f
-	nop
-
-	std		%f0, [$out + 0]
-	retl
-	std		%f2, [$out + 8]
-
-2:	alignaddrl	$out, %g0, $out
-	mov		0xff, $mask
-	srl		$mask, $tmp, $mask
-
-	faligndata	%f0, %f0, %f4
-	faligndata	%f0, %f2, %f6
-	faligndata	%f2, %f2, %f8
-
-	stda		%f4, [$out + $mask]0xc0	! partial store
-	std		%f6, [$out + 8]
-	add		$out, 16, $out
-	orn		%g0, $mask, $mask
-	retl
-	stda		%f8, [$out + $mask]0xc0	! partial store
-.type	aes_t4_decrypt,#function
-.size	aes_t4_decrypt,.-aes_t4_decrypt
-___
-}
-
-######################################################################
-# key setup subroutines
-#
-{
-my ($inp,$bits,$out,$tmp)=map("%o$_",(0..5));
-$code.=<<___;
-.globl	aes_t4_set_encrypt_key
-.align	32
-aes_t4_set_encrypt_key:
-.Lset_encrypt_key:
-	and		$inp, 7, $tmp
-	alignaddr	$inp, %g0, $inp
-	cmp		$bits, 192
-	ldd		[$inp + 0], %f0
-	bl,pt		%icc,.L128
-	ldd		[$inp + 8], %f2
-
-	be,pt		%icc,.L192
-	ldd		[$inp + 16], %f4
-	brz,pt		$tmp, .L256aligned
-	ldd		[$inp + 24], %f6
-
-	ldd		[$inp + 32], %f8
-	faligndata	%f0, %f2, %f0
-	faligndata	%f2, %f4, %f2
-	faligndata	%f4, %f6, %f4
-	faligndata	%f6, %f8, %f6
-.L256aligned:
-___
-for ($i=0; $i<6; $i++) {
-    $code.=<<___;
-	std		%f0, [$out + `32*$i+0`]
-	aes_kexpand1	%f0, %f6, $i, %f0
-	std		%f2, [$out + `32*$i+8`]
-	aes_kexpand2	%f2, %f0, %f2
-	std		%f4, [$out + `32*$i+16`]
-	aes_kexpand0	%f4, %f2, %f4
-	std		%f6, [$out + `32*$i+24`]
-	aes_kexpand2	%f6, %f4, %f6
-___
-}
-$code.=<<___;
-	std		%f0, [$out + `32*$i+0`]
-	aes_kexpand1	%f0, %f6, $i, %f0
-	std		%f2, [$out + `32*$i+8`]
-	aes_kexpand2	%f2, %f0, %f2
-	std		%f4, [$out + `32*$i+16`]
-	std		%f6, [$out + `32*$i+24`]
-	std		%f0, [$out + `32*$i+32`]
-	std		%f2, [$out + `32*$i+40`]
-
-	mov		14, $tmp
-	st		$tmp, [$out + 240]
-	retl
-	xor		%o0, %o0, %o0
-
-.align	16
-.L192:
-	brz,pt		$tmp, .L192aligned
-	nop
-
-	ldd		[$inp + 24], %f6
-	faligndata	%f0, %f2, %f0
-	faligndata	%f2, %f4, %f2
-	faligndata	%f4, %f6, %f4
-.L192aligned:
-___
-for ($i=0; $i<7; $i++) {
-    $code.=<<___;
-	std		%f0, [$out + `24*$i+0`]
-	aes_kexpand1	%f0, %f4, $i, %f0
-	std		%f2, [$out + `24*$i+8`]
-	aes_kexpand2	%f2, %f0, %f2
-	std		%f4, [$out + `24*$i+16`]
-	aes_kexpand2	%f4, %f2, %f4
-___
-}
-$code.=<<___;
-	std		%f0, [$out + `24*$i+0`]
-	aes_kexpand1	%f0, %f4, $i, %f0
-	std		%f2, [$out + `24*$i+8`]
-	aes_kexpand2	%f2, %f0, %f2
-	std		%f4, [$out + `24*$i+16`]
-	std		%f0, [$out + `24*$i+24`]
-	std		%f2, [$out + `24*$i+32`]
-
-	mov		12, $tmp
-	st		$tmp, [$out + 240]
-	retl
-	xor		%o0, %o0, %o0
-
-.align	16
-.L128:
-	brz,pt		$tmp, .L128aligned
-	nop
-
-	ldd		[$inp + 16], %f4
-	faligndata	%f0, %f2, %f0
-	faligndata	%f2, %f4, %f2
-.L128aligned:
-___
-for ($i=0; $i<10; $i++) {
-    $code.=<<___;
-	std		%f0, [$out + `16*$i+0`]
-	aes_kexpand1	%f0, %f2, $i, %f0
-	std		%f2, [$out + `16*$i+8`]
-	aes_kexpand2	%f2, %f0, %f2
-___
-}
-$code.=<<___;
-	std		%f0, [$out + `16*$i+0`]
-	std		%f2, [$out + `16*$i+8`]
-
-	mov		10, $tmp
-	st		$tmp, [$out + 240]
-	retl
-	xor		%o0, %o0, %o0
-.type	aes_t4_set_encrypt_key,#function
-.size	aes_t4_set_encrypt_key,.-aes_t4_set_encrypt_key
-
-.globl	aes_t4_set_decrypt_key
-.align	32
-aes_t4_set_decrypt_key:
-	mov		%o7, %o5
-	call		.Lset_encrypt_key
-	nop
-
-	mov		%o5, %o7
-	sll		$tmp, 4, $inp		! $tmp is number of rounds
-	add		$tmp, 2, $tmp
-	add		$out, $inp, $inp	! $inp=$out+16*rounds
-	srl		$tmp, 2, $tmp		! $tmp=(rounds+2)/4
-
-.Lkey_flip:
-	ldd		[$out + 0],  %f0
-	ldd		[$out + 8],  %f2
-	ldd		[$out + 16], %f4
-	ldd		[$out + 24], %f6
-	ldd		[$inp + 0],  %f8
-	ldd		[$inp + 8],  %f10
-	ldd		[$inp - 16], %f12
-	ldd		[$inp - 8],  %f14
-	sub		$tmp, 1, $tmp
-	std		%f0, [$inp + 0]
-	std		%f2, [$inp + 8]
-	std		%f4, [$inp - 16]
-	std		%f6, [$inp - 8]
-	std		%f8, [$out + 0]
-	std		%f10, [$out + 8]
-	std		%f12, [$out + 16]
-	std		%f14, [$out + 24]
-	add		$out, 32, $out
-	brnz		$tmp, .Lkey_flip
-	sub		$inp, 32, $inp
-
-	retl
-	xor		%o0, %o0, %o0
-.type	aes_t4_set_decrypt_key,#function
-.size	aes_t4_set_decrypt_key,.-aes_t4_set_decrypt_key
-___
-}
-
-{{{
-my ($inp,$out,$len,$key,$ivec,$enc)=map("%i$_",(0..5));
-my ($ileft,$iright,$ooff,$omask,$ivoff)=map("%l$_",(1..7));
-
-$code.=<<___;
-.align	32
-_aes128_encrypt_1x:
-___
-for ($i=0; $i<4; $i++) {
-    $code.=<<___;
-	aes_eround01	%f`16+8*$i+0`, %f0, %f2, %f4
-	aes_eround23	%f`16+8*$i+2`, %f0, %f2, %f2
-	aes_eround01	%f`16+8*$i+4`, %f4, %f2, %f0
-	aes_eround23	%f`16+8*$i+6`, %f4, %f2, %f2
-___
-}
-$code.=<<___;
-	aes_eround01	%f48, %f0, %f2, %f4
-	aes_eround23	%f50, %f0, %f2, %f2
-	aes_eround01_l	%f52, %f4, %f2, %f0
-	retl
-	aes_eround23_l	%f54, %f4, %f2, %f2
-.type	_aes128_encrypt_1x,#function
-.size	_aes128_encrypt_1x,.-_aes128_encrypt_1x
-
-.align	32
-_aes128_encrypt_2x:
-___
-for ($i=0; $i<4; $i++) {
-    $code.=<<___;
-	aes_eround01	%f`16+8*$i+0`, %f0, %f2, %f8
-	aes_eround23	%f`16+8*$i+2`, %f0, %f2, %f2
-	aes_eround01	%f`16+8*$i+0`, %f4, %f6, %f10
-	aes_eround23	%f`16+8*$i+2`, %f4, %f6, %f6
-	aes_eround01	%f`16+8*$i+4`, %f8, %f2, %f0
-	aes_eround23	%f`16+8*$i+6`, %f8, %f2, %f2
-	aes_eround01	%f`16+8*$i+4`, %f10, %f6, %f4
-	aes_eround23	%f`16+8*$i+6`, %f10, %f6, %f6
-___
-}
-$code.=<<___;
-	aes_eround01	%f48, %f0, %f2, %f8
-	aes_eround23	%f50, %f0, %f2, %f2
-	aes_eround01	%f48, %f4, %f6, %f10
-	aes_eround23	%f50, %f4, %f6, %f6
-	aes_eround01_l	%f52, %f8, %f2, %f0
-	aes_eround23_l	%f54, %f8, %f2, %f2
-	aes_eround01_l	%f52, %f10, %f6, %f4
-	retl
-	aes_eround23_l	%f54, %f10, %f6, %f6
-.type	_aes128_encrypt_2x,#function
-.size	_aes128_encrypt_2x,.-_aes128_encrypt_2x
-
-.align	32
-_aes128_loadkey:
-	ldx		[$key + 0], %g4
-	ldx		[$key + 8], %g5
-___
-for ($i=2; $i<22;$i++) {			# load key schedule
-    $code.=<<___;
-	ldd		[$key + `8*$i`], %f`12+2*$i`
-___
-}
-$code.=<<___;
-	retl
-	nop
-.type	_aes128_loadkey,#function
-.size	_aes128_loadkey,.-_aes128_loadkey
-_aes128_load_enckey=_aes128_loadkey
-_aes128_load_deckey=_aes128_loadkey
-
-___
-
-&alg_cbc_encrypt_implement("aes",128);
-if ($::evp) {
-    &alg_ctr32_implement("aes",128);
-    &alg_xts_implement("aes",128,"en");
-    &alg_xts_implement("aes",128,"de");
-}
-&alg_cbc_decrypt_implement("aes",128);
-
-$code.=<<___;
-.align	32
-_aes128_decrypt_1x:
-___
-for ($i=0; $i<4; $i++) {
-    $code.=<<___;
-	aes_dround01	%f`16+8*$i+0`, %f0, %f2, %f4
-	aes_dround23	%f`16+8*$i+2`, %f0, %f2, %f2
-	aes_dround01	%f`16+8*$i+4`, %f4, %f2, %f0
-	aes_dround23	%f`16+8*$i+6`, %f4, %f2, %f2
-___
-}
-$code.=<<___;
-	aes_dround01	%f48, %f0, %f2, %f4
-	aes_dround23	%f50, %f0, %f2, %f2
-	aes_dround01_l	%f52, %f4, %f2, %f0
-	retl
-	aes_dround23_l	%f54, %f4, %f2, %f2
-.type	_aes128_decrypt_1x,#function
-.size	_aes128_decrypt_1x,.-_aes128_decrypt_1x
-
-.align	32
-_aes128_decrypt_2x:
-___
-for ($i=0; $i<4; $i++) {
-    $code.=<<___;
-	aes_dround01	%f`16+8*$i+0`, %f0, %f2, %f8
-	aes_dround23	%f`16+8*$i+2`, %f0, %f2, %f2
-	aes_dround01	%f`16+8*$i+0`, %f4, %f6, %f10
-	aes_dround23	%f`16+8*$i+2`, %f4, %f6, %f6
-	aes_dround01	%f`16+8*$i+4`, %f8, %f2, %f0
-	aes_dround23	%f`16+8*$i+6`, %f8, %f2, %f2
-	aes_dround01	%f`16+8*$i+4`, %f10, %f6, %f4
-	aes_dround23	%f`16+8*$i+6`, %f10, %f6, %f6
-___
-}
-$code.=<<___;
-	aes_dround01	%f48, %f0, %f2, %f8
-	aes_dround23	%f50, %f0, %f2, %f2
-	aes_dround01	%f48, %f4, %f6, %f10
-	aes_dround23	%f50, %f4, %f6, %f6
-	aes_dround01_l	%f52, %f8, %f2, %f0
-	aes_dround23_l	%f54, %f8, %f2, %f2
-	aes_dround01_l	%f52, %f10, %f6, %f4
-	retl
-	aes_dround23_l	%f54, %f10, %f6, %f6
-.type	_aes128_decrypt_2x,#function
-.size	_aes128_decrypt_2x,.-_aes128_decrypt_2x
-___
-
-$code.=<<___;
-.align	32
-_aes192_encrypt_1x:
-___
-for ($i=0; $i<5; $i++) {
-    $code.=<<___;
-	aes_eround01	%f`16+8*$i+0`, %f0, %f2, %f4
-	aes_eround23	%f`16+8*$i+2`, %f0, %f2, %f2
-	aes_eround01	%f`16+8*$i+4`, %f4, %f2, %f0
-	aes_eround23	%f`16+8*$i+6`, %f4, %f2, %f2
-___
-}
-$code.=<<___;
-	aes_eround01	%f56, %f0, %f2, %f4
-	aes_eround23	%f58, %f0, %f2, %f2
-	aes_eround01_l	%f60, %f4, %f2, %f0
-	retl
-	aes_eround23_l	%f62, %f4, %f2, %f2
-.type	_aes192_encrypt_1x,#function
-.size	_aes192_encrypt_1x,.-_aes192_encrypt_1x
-
-.align	32
-_aes192_encrypt_2x:
-___
-for ($i=0; $i<5; $i++) {
-    $code.=<<___;
-	aes_eround01	%f`16+8*$i+0`, %f0, %f2, %f8
-	aes_eround23	%f`16+8*$i+2`, %f0, %f2, %f2
-	aes_eround01	%f`16+8*$i+0`, %f4, %f6, %f10
-	aes_eround23	%f`16+8*$i+2`, %f4, %f6, %f6
-	aes_eround01	%f`16+8*$i+4`, %f8, %f2, %f0
-	aes_eround23	%f`16+8*$i+6`, %f8, %f2, %f2
-	aes_eround01	%f`16+8*$i+4`, %f10, %f6, %f4
-	aes_eround23	%f`16+8*$i+6`, %f10, %f6, %f6
-___
-}
-$code.=<<___;
-	aes_eround01	%f56, %f0, %f2, %f8
-	aes_eround23	%f58, %f0, %f2, %f2
-	aes_eround01	%f56, %f4, %f6, %f10
-	aes_eround23	%f58, %f4, %f6, %f6
-	aes_eround01_l	%f60, %f8, %f2, %f0
-	aes_eround23_l	%f62, %f8, %f2, %f2
-	aes_eround01_l	%f60, %f10, %f6, %f4
-	retl
-	aes_eround23_l	%f62, %f10, %f6, %f6
-.type	_aes192_encrypt_2x,#function
-.size	_aes192_encrypt_2x,.-_aes192_encrypt_2x
-
-.align	32
-_aes256_encrypt_1x:
-	aes_eround01	%f16, %f0, %f2, %f4
-	aes_eround23	%f18, %f0, %f2, %f2
-	ldd		[$key + 208], %f16
-	ldd		[$key + 216], %f18
-	aes_eround01	%f20, %f4, %f2, %f0
-	aes_eround23	%f22, %f4, %f2, %f2
-	ldd		[$key + 224], %f20
-	ldd		[$key + 232], %f22
-___
-for ($i=1; $i<6; $i++) {
-    $code.=<<___;
-	aes_eround01	%f`16+8*$i+0`, %f0, %f2, %f4
-	aes_eround23	%f`16+8*$i+2`, %f0, %f2, %f2
-	aes_eround01	%f`16+8*$i+4`, %f4, %f2, %f0
-	aes_eround23	%f`16+8*$i+6`, %f4, %f2, %f2
-___
-}
-$code.=<<___;
-	aes_eround01	%f16, %f0, %f2, %f4
-	aes_eround23	%f18, %f0, %f2, %f2
-	ldd		[$key + 16], %f16
-	ldd		[$key + 24], %f18
-	aes_eround01_l	%f20, %f4, %f2, %f0
-	aes_eround23_l	%f22, %f4, %f2, %f2
-	ldd		[$key + 32], %f20
-	retl
-	ldd		[$key + 40], %f22
-.type	_aes256_encrypt_1x,#function
-.size	_aes256_encrypt_1x,.-_aes256_encrypt_1x
-
-.align	32
-_aes256_encrypt_2x:
-	aes_eround01	%f16, %f0, %f2, %f8
-	aes_eround23	%f18, %f0, %f2, %f2
-	aes_eround01	%f16, %f4, %f6, %f10
-	aes_eround23	%f18, %f4, %f6, %f6
-	ldd		[$key + 208], %f16
-	ldd		[$key + 216], %f18
-	aes_eround01	%f20, %f8, %f2, %f0
-	aes_eround23	%f22, %f8, %f2, %f2
-	aes_eround01	%f20, %f10, %f6, %f4
-	aes_eround23	%f22, %f10, %f6, %f6
-	ldd		[$key + 224], %f20
-	ldd		[$key + 232], %f22
-___
-for ($i=1; $i<6; $i++) {
-    $code.=<<___;
-	aes_eround01	%f`16+8*$i+0`, %f0, %f2, %f8
-	aes_eround23	%f`16+8*$i+2`, %f0, %f2, %f2
-	aes_eround01	%f`16+8*$i+0`, %f4, %f6, %f10
-	aes_eround23	%f`16+8*$i+2`, %f4, %f6, %f6
-	aes_eround01	%f`16+8*$i+4`, %f8, %f2, %f0
-	aes_eround23	%f`16+8*$i+6`, %f8, %f2, %f2
-	aes_eround01	%f`16+8*$i+4`, %f10, %f6, %f4
-	aes_eround23	%f`16+8*$i+6`, %f10, %f6, %f6
-___
-}
-$code.=<<___;
-	aes_eround01	%f16, %f0, %f2, %f8
-	aes_eround23	%f18, %f0, %f2, %f2
-	aes_eround01	%f16, %f4, %f6, %f10
-	aes_eround23	%f18, %f4, %f6, %f6
-	ldd		[$key + 16], %f16
-	ldd		[$key + 24], %f18
-	aes_eround01_l	%f20, %f8, %f2, %f0
-	aes_eround23_l	%f22, %f8, %f2, %f2
-	aes_eround01_l	%f20, %f10, %f6, %f4
-	aes_eround23_l	%f22, %f10, %f6, %f6
-	ldd		[$key + 32], %f20
-	retl
-	ldd		[$key + 40], %f22
-.type	_aes256_encrypt_2x,#function
-.size	_aes256_encrypt_2x,.-_aes256_encrypt_2x
-
-.align	32
-_aes192_loadkey:
-	ldx		[$key + 0], %g4
-	ldx		[$key + 8], %g5
-___
-for ($i=2; $i<26;$i++) {			# load key schedule
-    $code.=<<___;
-	ldd		[$key + `8*$i`], %f`12+2*$i`
-___
-}
-$code.=<<___;
-	retl
-	nop
-.type	_aes192_loadkey,#function
-.size	_aes192_loadkey,.-_aes192_loadkey
-_aes256_loadkey=_aes192_loadkey
-_aes192_load_enckey=_aes192_loadkey
-_aes192_load_deckey=_aes192_loadkey
-_aes256_load_enckey=_aes192_loadkey
-_aes256_load_deckey=_aes192_loadkey
-___
-
-&alg_cbc_encrypt_implement("aes",256);
-&alg_cbc_encrypt_implement("aes",192);
-if ($::evp) {
-    &alg_ctr32_implement("aes",256);
-    &alg_xts_implement("aes",256,"en");
-    &alg_xts_implement("aes",256,"de");
-    &alg_ctr32_implement("aes",192);
-}
-&alg_cbc_decrypt_implement("aes",192);
-&alg_cbc_decrypt_implement("aes",256);
-
-$code.=<<___;
-.align	32
-_aes256_decrypt_1x:
-	aes_dround01	%f16, %f0, %f2, %f4
-	aes_dround23	%f18, %f0, %f2, %f2
-	ldd		[$key + 208], %f16
-	ldd		[$key + 216], %f18
-	aes_dround01	%f20, %f4, %f2, %f0
-	aes_dround23	%f22, %f4, %f2, %f2
-	ldd		[$key + 224], %f20
-	ldd		[$key + 232], %f22
-___
-for ($i=1; $i<6; $i++) {
-    $code.=<<___;
-	aes_dround01	%f`16+8*$i+0`, %f0, %f2, %f4
-	aes_dround23	%f`16+8*$i+2`, %f0, %f2, %f2
-	aes_dround01	%f`16+8*$i+4`, %f4, %f2, %f0
-	aes_dround23	%f`16+8*$i+6`, %f4, %f2, %f2
-___
-}
-$code.=<<___;
-	aes_dround01	%f16, %f0, %f2, %f4
-	aes_dround23	%f18, %f0, %f2, %f2
-	ldd		[$key + 16], %f16
-	ldd		[$key + 24], %f18
-	aes_dround01_l	%f20, %f4, %f2, %f0
-	aes_dround23_l	%f22, %f4, %f2, %f2
-	ldd		[$key + 32], %f20
-	retl
-	ldd		[$key + 40], %f22
-.type	_aes256_decrypt_1x,#function
-.size	_aes256_decrypt_1x,.-_aes256_decrypt_1x
-
-.align	32
-_aes256_decrypt_2x:
-	aes_dround01	%f16, %f0, %f2, %f8
-	aes_dround23	%f18, %f0, %f2, %f2
-	aes_dround01	%f16, %f4, %f6, %f10
-	aes_dround23	%f18, %f4, %f6, %f6
-	ldd		[$key + 208], %f16
-	ldd		[$key + 216], %f18
-	aes_dround01	%f20, %f8, %f2, %f0
-	aes_dround23	%f22, %f8, %f2, %f2
-	aes_dround01	%f20, %f10, %f6, %f4
-	aes_dround23	%f22, %f10, %f6, %f6
-	ldd		[$key + 224], %f20
-	ldd		[$key + 232], %f22
-___
-for ($i=1; $i<6; $i++) {
-    $code.=<<___;
-	aes_dround01	%f`16+8*$i+0`, %f0, %f2, %f8
-	aes_dround23	%f`16+8*$i+2`, %f0, %f2, %f2
-	aes_dround01	%f`16+8*$i+0`, %f4, %f6, %f10
-	aes_dround23	%f`16+8*$i+2`, %f4, %f6, %f6
-	aes_dround01	%f`16+8*$i+4`, %f8, %f2, %f0
-	aes_dround23	%f`16+8*$i+6`, %f8, %f2, %f2
-	aes_dround01	%f`16+8*$i+4`, %f10, %f6, %f4
-	aes_dround23	%f`16+8*$i+6`, %f10, %f6, %f6
-___
-}
-$code.=<<___;
-	aes_dround01	%f16, %f0, %f2, %f8
-	aes_dround23	%f18, %f0, %f2, %f2
-	aes_dround01	%f16, %f4, %f6, %f10
-	aes_dround23	%f18, %f4, %f6, %f6
-	ldd		[$key + 16], %f16
-	ldd		[$key + 24], %f18
-	aes_dround01_l	%f20, %f8, %f2, %f0
-	aes_dround23_l	%f22, %f8, %f2, %f2
-	aes_dround01_l	%f20, %f10, %f6, %f4
-	aes_dround23_l	%f22, %f10, %f6, %f6
-	ldd		[$key + 32], %f20
-	retl
-	ldd		[$key + 40], %f22
-.type	_aes256_decrypt_2x,#function
-.size	_aes256_decrypt_2x,.-_aes256_decrypt_2x
-
-.align	32
-_aes192_decrypt_1x:
-___
-for ($i=0; $i<5; $i++) {
-    $code.=<<___;
-	aes_dround01	%f`16+8*$i+0`, %f0, %f2, %f4
-	aes_dround23	%f`16+8*$i+2`, %f0, %f2, %f2
-	aes_dround01	%f`16+8*$i+4`, %f4, %f2, %f0
-	aes_dround23	%f`16+8*$i+6`, %f4, %f2, %f2
-___
-}
-$code.=<<___;
-	aes_dround01	%f56, %f0, %f2, %f4
-	aes_dround23	%f58, %f0, %f2, %f2
-	aes_dround01_l	%f60, %f4, %f2, %f0
-	retl
-	aes_dround23_l	%f62, %f4, %f2, %f2
-.type	_aes192_decrypt_1x,#function
-.size	_aes192_decrypt_1x,.-_aes192_decrypt_1x
-
-.align	32
-_aes192_decrypt_2x:
-___
-for ($i=0; $i<5; $i++) {
-    $code.=<<___;
-	aes_dround01	%f`16+8*$i+0`, %f0, %f2, %f8
-	aes_dround23	%f`16+8*$i+2`, %f0, %f2, %f2
-	aes_dround01	%f`16+8*$i+0`, %f4, %f6, %f10
-	aes_dround23	%f`16+8*$i+2`, %f4, %f6, %f6
-	aes_dround01	%f`16+8*$i+4`, %f8, %f2, %f0
-	aes_dround23	%f`16+8*$i+6`, %f8, %f2, %f2
-	aes_dround01	%f`16+8*$i+4`, %f10, %f6, %f4
-	aes_dround23	%f`16+8*$i+6`, %f10, %f6, %f6
-___
-}
-$code.=<<___;
-	aes_dround01	%f56, %f0, %f2, %f8
-	aes_dround23	%f58, %f0, %f2, %f2
-	aes_dround01	%f56, %f4, %f6, %f10
-	aes_dround23	%f58, %f4, %f6, %f6
-	aes_dround01_l	%f60, %f8, %f2, %f0
-	aes_dround23_l	%f62, %f8, %f2, %f2
-	aes_dround01_l	%f60, %f10, %f6, %f4
-	retl
-	aes_dround23_l	%f62, %f10, %f6, %f6
-.type	_aes192_decrypt_2x,#function
-.size	_aes192_decrypt_2x,.-_aes192_decrypt_2x
-___
-}}}
-
-if (!$::evp) {
-$code.=<<___;
-.global	AES_encrypt
-AES_encrypt=aes_t4_encrypt
-.global	AES_decrypt
-AES_decrypt=aes_t4_decrypt
-.global	AES_set_encrypt_key
-.align	32
-AES_set_encrypt_key:
-	andcc		%o2, 7, %g0		! check alignment
-	bnz,a,pn	%icc, 1f
-	mov		-1, %o0
-	brz,a,pn	%o0, 1f
-	mov		-1, %o0
-	brz,a,pn	%o2, 1f
-	mov		-1, %o0
-	andncc		%o1, 0x1c0, %g0
-	bnz,a,pn	%icc, 1f
-	mov		-2, %o0
-	cmp		%o1, 128
-	bl,a,pn		%icc, 1f
-	mov		-2, %o0
-	b		aes_t4_set_encrypt_key
-	nop
-1:	retl
-	nop
-.type	AES_set_encrypt_key,#function
-.size	AES_set_encrypt_key,.-AES_set_encrypt_key
-
-.global	AES_set_decrypt_key
-.align	32
-AES_set_decrypt_key:
-	andcc		%o2, 7, %g0		! check alignment
-	bnz,a,pn	%icc, 1f
-	mov		-1, %o0
-	brz,a,pn	%o0, 1f
-	mov		-1, %o0
-	brz,a,pn	%o2, 1f
-	mov		-1, %o0
-	andncc		%o1, 0x1c0, %g0
-	bnz,a,pn	%icc, 1f
-	mov		-2, %o0
-	cmp		%o1, 128
-	bl,a,pn		%icc, 1f
-	mov		-2, %o0
-	b		aes_t4_set_decrypt_key
-	nop
-1:	retl
-	nop
-.type	AES_set_decrypt_key,#function
-.size	AES_set_decrypt_key,.-AES_set_decrypt_key
-___
-
-my ($inp,$out,$len,$key,$ivec,$enc)=map("%o$_",(0..5));
-
-$code.=<<___;
-.globl	AES_cbc_encrypt
-.align	32
-AES_cbc_encrypt:
-	ld		[$key + 240], %g1
-	nop
-	brz		$enc, .Lcbc_decrypt
-	cmp		%g1, 12
-
-	bl,pt		%icc, aes128_t4_cbc_encrypt
-	nop
-	be,pn		%icc, aes192_t4_cbc_encrypt
-	nop
-	ba		aes256_t4_cbc_encrypt
-	nop
-
-.Lcbc_decrypt:
-	bl,pt		%icc, aes128_t4_cbc_decrypt
-	nop
-	be,pn		%icc, aes192_t4_cbc_decrypt
-	nop
-	ba		aes256_t4_cbc_decrypt
-	nop
-.type	AES_cbc_encrypt,#function
-.size	AES_cbc_encrypt,.-AES_cbc_encrypt
-___
-}
-$code.=<<___;
-.asciz	"AES for SPARC T4, David S. Miller, Andy Polyakov"
-.align	4
-___
-
-&emit_assembler();
-
-close STDOUT;
--- a/crypto/aes/asm/aesv8-armx.pl
+++ b/crypto/aes/asm/aesv8-armx.pl
@@ -1,960 +0,0 @@
-#!/usr/bin/env perl
-#
-# ====================================================================
-# Written by Andy Polyakov <appro@openssl.org> for the OpenSSL
-# project. The module is, however, dual licensed under OpenSSL and
-# CRYPTOGAMS licenses depending on where you obtain it. For further
-# details see http://www.openssl.org/~appro/cryptogams/.
-# ====================================================================
-#
-# This module implements support for ARMv8 AES instructions. The
-# module is endian-agnostic in sense that it supports both big- and
-# little-endian cases. As does it support both 32- and 64-bit modes
-# of operation. Latter is achieved by limiting amount of utilized
-# registers to 16, which implies additional NEON load and integer
-# instructions. This has no effect on mighty Apple A7, where results
-# are literally equal to the theoretical estimates based on AES
-# instruction latencies and issue rates. On Cortex-A53, an in-order
-# execution core, this costs up to 10-15%, which is partially
-# compensated by implementing dedicated code path for 128-bit
-# CBC encrypt case. On Cortex-A57 parallelizable mode performance
-# seems to be limited by sheer amount of NEON instructions...
-#
-# Performance in cycles per byte processed with 128-bit key:
-#
-#		CBC enc		CBC dec		CTR
-# Apple A7	2.39		1.20		1.20
-# Cortex-A53	2.45		1.87		1.94
-# Cortex-A57	3.64		1.34		1.32
-
-$flavour = shift;
-open STDOUT,">".shift;
-
-$prefix="aes_v8";
-
-$code=<<___;
-#include "arm_arch.h"
-
-#if __ARM_ARCH__>=7
-.text
-___
-$code.=".arch	armv8-a+crypto\n"	if ($flavour =~ /64/);
-$code.=".fpu	neon\n.code	32\n"	if ($flavour !~ /64/);
-
-# Assembler mnemonics are an eclectic mix of 32- and 64-bit syntax,
-# NEON is mostly 32-bit mnemonics, integer - mostly 64. Goal is to
-# maintain both 32- and 64-bit codes within single module and
-# transliterate common code to either flavour with regex vodoo.
-#
-{{{
-my ($inp,$bits,$out,$ptr,$rounds)=("x0","w1","x2","x3","w12");
-my ($zero,$rcon,$mask,$in0,$in1,$tmp,$key)=
-	$flavour=~/64/? map("q$_",(0..6)) : map("q$_",(0..3,8..10));
-
-
-$code.=<<___;
-.align	5
-rcon:
-.long	0x01,0x01,0x01,0x01
-.long	0x0c0f0e0d,0x0c0f0e0d,0x0c0f0e0d,0x0c0f0e0d	// rotate-n-splat
-.long	0x1b,0x1b,0x1b,0x1b
-
-.globl	${prefix}_set_encrypt_key
-.type	${prefix}_set_encrypt_key,%function
-.align	5
-${prefix}_set_encrypt_key:
-.Lenc_key:
-___
-$code.=<<___	if ($flavour =~ /64/);
-	stp	x29,x30,[sp,#-16]!
-	add	x29,sp,#0
-___
-$code.=<<___;
-	mov	$ptr,#-1
-	cmp	$inp,#0
-	b.eq	.Lenc_key_abort
-	cmp	$out,#0
-	b.eq	.Lenc_key_abort
-	mov	$ptr,#-2
-	cmp	$bits,#128
-	b.lt	.Lenc_key_abort
-	cmp	$bits,#256
-	b.gt	.Lenc_key_abort
-	tst	$bits,#0x3f
-	b.ne	.Lenc_key_abort
-
-	adr	$ptr,rcon
-	cmp	$bits,#192
-
-	veor	$zero,$zero,$zero
-	vld1.8	{$in0},[$inp],#16
-	mov	$bits,#8		// reuse $bits
-	vld1.32	{$rcon,$mask},[$ptr],#32
-
-	b.lt	.Loop128
-	b.eq	.L192
-	b	.L256
-
-.align	4
-.Loop128:
-	vtbl.8	$key,{$in0},$mask
-	vext.8	$tmp,$zero,$in0,#12
-	vst1.32	{$in0},[$out],#16
-	aese	$key,$zero
-	subs	$bits,$bits,#1
-
-	veor	$in0,$in0,$tmp
-	vext.8	$tmp,$zero,$tmp,#12
-	veor	$in0,$in0,$tmp
-	vext.8	$tmp,$zero,$tmp,#12
-	 veor	$key,$key,$rcon
-	veor	$in0,$in0,$tmp
-	vshl.u8	$rcon,$rcon,#1
-	veor	$in0,$in0,$key
-	b.ne	.Loop128
-
-	vld1.32	{$rcon},[$ptr]
-
-	vtbl.8	$key,{$in0},$mask
-	vext.8	$tmp,$zero,$in0,#12
-	vst1.32	{$in0},[$out],#16
-	aese	$key,$zero
-
-	veor	$in0,$in0,$tmp
-	vext.8	$tmp,$zero,$tmp,#12
-	veor	$in0,$in0,$tmp
-	vext.8	$tmp,$zero,$tmp,#12
-	 veor	$key,$key,$rcon
-	veor	$in0,$in0,$tmp
-	vshl.u8	$rcon,$rcon,#1
-	veor	$in0,$in0,$key
-
-	vtbl.8	$key,{$in0},$mask
-	vext.8	$tmp,$zero,$in0,#12
-	vst1.32	{$in0},[$out],#16
-	aese	$key,$zero
-
-	veor	$in0,$in0,$tmp
-	vext.8	$tmp,$zero,$tmp,#12
-	veor	$in0,$in0,$tmp
-	vext.8	$tmp,$zero,$tmp,#12
-	 veor	$key,$key,$rcon
-	veor	$in0,$in0,$tmp
-	veor	$in0,$in0,$key
-	vst1.32	{$in0},[$out]
-	add	$out,$out,#0x50
-
-	mov	$rounds,#10
-	b	.Ldone
-
-.align	4
-.L192:
-	vld1.8	{$in1},[$inp],#8
-	vmov.i8	$key,#8			// borrow $key
-	vst1.32	{$in0},[$out],#16
-	vsub.i8	$mask,$mask,$key	// adjust the mask
-
-.Loop192:
-	vtbl.8	$key,{$in1},$mask
-	vext.8	$tmp,$zero,$in0,#12
-	vst1.32	{$in1},[$out],#8
-	aese	$key,$zero
-	subs	$bits,$bits,#1
-
-	veor	$in0,$in0,$tmp
-	vext.8	$tmp,$zero,$tmp,#12
-	veor	$in0,$in0,$tmp
-	vext.8	$tmp,$zero,$tmp,#12
-	veor	$in0,$in0,$tmp
-
-	vdup.32	$tmp,${in0}[3]
-	veor	$tmp,$tmp,$in1
-	 veor	$key,$key,$rcon
-	vext.8	$in1,$zero,$in1,#12
-	vshl.u8	$rcon,$rcon,#1
-	veor	$in1,$in1,$tmp
-	veor	$in0,$in0,$key
-	veor	$in1,$in1,$key
-	vst1.32	{$in0},[$out],#16
-	b.ne	.Loop192
-
-	mov	$rounds,#12
-	add	$out,$out,#0x20
-	b	.Ldone
-
-.align	4
-.L256:
-	vld1.8	{$in1},[$inp]
-	mov	$bits,#7
-	mov	$rounds,#14
-	vst1.32	{$in0},[$out],#16
-
-.Loop256:
-	vtbl.8	$key,{$in1},$mask
-	vext.8	$tmp,$zero,$in0,#12
-	vst1.32	{$in1},[$out],#16
-	aese	$key,$zero
-	subs	$bits,$bits,#1
-
-	veor	$in0,$in0,$tmp
-	vext.8	$tmp,$zero,$tmp,#12
-	veor	$in0,$in0,$tmp
-	vext.8	$tmp,$zero,$tmp,#12
-	 veor	$key,$key,$rcon
-	veor	$in0,$in0,$tmp
-	vshl.u8	$rcon,$rcon,#1
-	veor	$in0,$in0,$key
-	vst1.32	{$in0},[$out],#16
-	b.eq	.Ldone
-
-	vdup.32	$key,${in0}[3]		// just splat
-	vext.8	$tmp,$zero,$in1,#12
-	aese	$key,$zero
-
-	veor	$in1,$in1,$tmp
-	vext.8	$tmp,$zero,$tmp,#12
-	veor	$in1,$in1,$tmp
-	vext.8	$tmp,$zero,$tmp,#12
-	veor	$in1,$in1,$tmp
-
-	veor	$in1,$in1,$key
-	b	.Loop256
-
-.Ldone:
-	str	$rounds,[$out]
-	mov	$ptr,#0
-
-.Lenc_key_abort:
-	mov	x0,$ptr			// return value
-	`"ldr	x29,[sp],#16"		if ($flavour =~ /64/)`
-	ret
-.size	${prefix}_set_encrypt_key,.-${prefix}_set_encrypt_key
-
-.globl	${prefix}_set_decrypt_key
-.type	${prefix}_set_decrypt_key,%function
-.align	5
-${prefix}_set_decrypt_key:
-___
-$code.=<<___	if ($flavour =~ /64/);
-	stp	x29,x30,[sp,#-16]!
-	add	x29,sp,#0
-___
-$code.=<<___	if ($flavour !~ /64/);
-	stmdb	sp!,{r4,lr}
-___
-$code.=<<___;
-	bl	.Lenc_key
-
-	cmp	x0,#0
-	b.ne	.Ldec_key_abort
-
-	sub	$out,$out,#240		// restore original $out
-	mov	x4,#-16
-	add	$inp,$out,x12,lsl#4	// end of key schedule
-
-	vld1.32	{v0.16b},[$out]
-	vld1.32	{v1.16b},[$inp]
-	vst1.32	{v0.16b},[$inp],x4
-	vst1.32	{v1.16b},[$out],#16
-
-.Loop_imc:
-	vld1.32	{v0.16b},[$out]
-	vld1.32	{v1.16b},[$inp]
-	aesimc	v0.16b,v0.16b
-	aesimc	v1.16b,v1.16b
-	vst1.32	{v0.16b},[$inp],x4
-	vst1.32	{v1.16b},[$out],#16
-	cmp	$inp,$out
-	b.hi	.Loop_imc
-
-	vld1.32	{v0.16b},[$out]
-	aesimc	v0.16b,v0.16b
-	vst1.32	{v0.16b},[$inp]
-
-	eor	x0,x0,x0		// return value
-.Ldec_key_abort:
-___
-$code.=<<___	if ($flavour !~ /64/);
-	ldmia	sp!,{r4,pc}
-___
-$code.=<<___	if ($flavour =~ /64/);
-	ldp	x29,x30,[sp],#16
-	ret
-___
-$code.=<<___;
-.size	${prefix}_set_decrypt_key,.-${prefix}_set_decrypt_key
-___
-}}}
-{{{
-sub gen_block () {
-my $dir = shift;
-my ($e,$mc) = $dir eq "en" ? ("e","mc") : ("d","imc");
-my ($inp,$out,$key)=map("x$_",(0..2));
-my $rounds="w3";
-my ($rndkey0,$rndkey1,$inout)=map("q$_",(0..3));
-
-$code.=<<___;
-.globl	${prefix}_${dir}crypt
-.type	${prefix}_${dir}crypt,%function
-.align	5
-${prefix}_${dir}crypt:
-	ldr	$rounds,[$key,#240]
-	vld1.32	{$rndkey0},[$key],#16
-	vld1.8	{$inout},[$inp]
-	sub	$rounds,$rounds,#2
-	vld1.32	{$rndkey1},[$key],#16
-
-.Loop_${dir}c:
-	aes$e	$inout,$rndkey0
-	vld1.32	{$rndkey0},[$key],#16
-	aes$mc	$inout,$inout
-	subs	$rounds,$rounds,#2
-	aes$e	$inout,$rndkey1
-	vld1.32	{$rndkey1},[$key],#16
-	aes$mc	$inout,$inout
-	b.gt	.Loop_${dir}c
-
-	aes$e	$inout,$rndkey0
-	vld1.32	{$rndkey0},[$key]
-	aes$mc	$inout,$inout
-	aes$e	$inout,$rndkey1
-	veor	$inout,$inout,$rndkey0
-
-	vst1.8	{$inout},[$out]
-	ret
-.size	${prefix}_${dir}crypt,.-${prefix}_${dir}crypt
-___
-}
-&gen_block("en");
-&gen_block("de");
-}}}
-{{{
-my ($inp,$out,$len,$key,$ivp)=map("x$_",(0..4)); my $enc="w5";
-my ($rounds,$cnt,$key_,$step,$step1)=($enc,"w6","x7","x8","x12");
-my ($dat0,$dat1,$in0,$in1,$tmp0,$tmp1,$ivec,$rndlast)=map("q$_",(0..7));
-
-my ($dat,$tmp,$rndzero_n_last)=($dat0,$tmp0,$tmp1);
-
-### q8-q15	preloaded key schedule
-
-$code.=<<___;
-.globl	${prefix}_cbc_encrypt
-.type	${prefix}_cbc_encrypt,%function
-.align	5
-${prefix}_cbc_encrypt:
-___
-$code.=<<___	if ($flavour =~ /64/);
-	stp	x29,x30,[sp,#-16]!
-	add	x29,sp,#0
-___
-$code.=<<___	if ($flavour !~ /64/);
-	mov	ip,sp
-	stmdb	sp!,{r4-r8,lr}
-	vstmdb	sp!,{d8-d15}            @ ABI specification says so
-	ldmia	ip,{r4-r5}		@ load remaining args
-___
-$code.=<<___;
-	subs	$len,$len,#16
-	mov	$step,#16
-	b.lo	.Lcbc_abort
-	cclr	$step,eq
-
-	cmp	$enc,#0			// en- or decrypting?
-	ldr	$rounds,[$key,#240]
-	and	$len,$len,#-16
-	vld1.8	{$ivec},[$ivp]
-	vld1.8	{$dat},[$inp],$step
-
-	vld1.32	{q8-q9},[$key]		// load key schedule...
-	sub	$rounds,$rounds,#6
-	add	$key_,$key,x5,lsl#4	// pointer to last 7 round keys
-	sub	$rounds,$rounds,#2
-	vld1.32	{q10-q11},[$key_],#32
-	vld1.32	{q12-q13},[$key_],#32
-	vld1.32	{q14-q15},[$key_],#32
-	vld1.32	{$rndlast},[$key_]
-
-	add	$key_,$key,#32
-	mov	$cnt,$rounds
-	b.eq	.Lcbc_dec
-
-	cmp	$rounds,#2
-	veor	$dat,$dat,$ivec
-	veor	$rndzero_n_last,q8,$rndlast
-	b.eq	.Lcbc_enc128
-
-.Loop_cbc_enc:
-	aese	$dat,q8
-	vld1.32	{q8},[$key_],#16
-	aesmc	$dat,$dat
-	subs	$cnt,$cnt,#2
-	aese	$dat,q9
-	vld1.32	{q9},[$key_],#16
-	aesmc	$dat,$dat
-	b.gt	.Loop_cbc_enc
-
-	aese	$dat,q8
-	aesmc	$dat,$dat
-	 subs	$len,$len,#16
-	aese	$dat,q9
-	aesmc	$dat,$dat
-	 cclr	$step,eq
-	aese	$dat,q10
-	aesmc	$dat,$dat
-	 add	$key_,$key,#16
-	aese	$dat,q11
-	aesmc	$dat,$dat
-	 vld1.8	{q8},[$inp],$step
-	aese	$dat,q12
-	aesmc	$dat,$dat
-	 veor	q8,q8,$rndzero_n_last
-	aese	$dat,q13
-	aesmc	$dat,$dat
-	 vld1.32 {q9},[$key_],#16	// re-pre-load rndkey[1]
-	aese	$dat,q14
-	aesmc	$dat,$dat
-	aese	$dat,q15
-
-	 mov	$cnt,$rounds
-	veor	$ivec,$dat,$rndlast
-	vst1.8	{$ivec},[$out],#16
-	b.hs	.Loop_cbc_enc
-
-	b	.Lcbc_done
-
-.align	5
-.Lcbc_enc128:
-	vld1.32	{$in0-$in1},[$key_]
-	aese	$dat,q8
-	aesmc	$dat,$dat
-	b	.Lenter_cbc_enc128
-.Loop_cbc_enc128:
-	aese	$dat,q8
-	aesmc	$dat,$dat
-	 vst1.8	{$ivec},[$out],#16
-.Lenter_cbc_enc128:
-	aese	$dat,q9
-	aesmc	$dat,$dat
-	 subs	$len,$len,#16
-	aese	$dat,$in0
-	aesmc	$dat,$dat
-	 cclr	$step,eq
-	aese	$dat,$in1
-	aesmc	$dat,$dat
-	aese	$dat,q10
-	aesmc	$dat,$dat
-	aese	$dat,q11
-	aesmc	$dat,$dat
-	 vld1.8	{q8},[$inp],$step
-	aese	$dat,q12
-	aesmc	$dat,$dat
-	aese	$dat,q13
-	aesmc	$dat,$dat
-	aese	$dat,q14
-	aesmc	$dat,$dat
-	 veor	q8,q8,$rndzero_n_last
-	aese	$dat,q15
-	veor	$ivec,$dat,$rndlast
-	b.hs	.Loop_cbc_enc128
-
-	vst1.8	{$ivec},[$out],#16
-	b	.Lcbc_done
-___
-{
-my ($dat2,$in2,$tmp2)=map("q$_",(10,11,9));
-$code.=<<___;
-.align	5
-.Lcbc_dec:
-	vld1.8	{$dat2},[$inp],#16
-	subs	$len,$len,#32		// bias
-	add	$cnt,$rounds,#2
-	vorr	$in1,$dat,$dat
-	vorr	$dat1,$dat,$dat
-	vorr	$in2,$dat2,$dat2
-	b.lo	.Lcbc_dec_tail
-
-	vorr	$dat1,$dat2,$dat2
-	vld1.8	{$dat2},[$inp],#16
-	vorr	$in0,$dat,$dat
-	vorr	$in1,$dat1,$dat1
-	vorr	$in2,$dat2,$dat2
-
-.Loop3x_cbc_dec:
-	aesd	$dat0,q8
-	aesd	$dat1,q8
-	aesd	$dat2,q8
-	vld1.32	{q8},[$key_],#16
-	aesimc	$dat0,$dat0
-	aesimc	$dat1,$dat1
-	aesimc	$dat2,$dat2
-	subs	$cnt,$cnt,#2
-	aesd	$dat0,q9
-	aesd	$dat1,q9
-	aesd	$dat2,q9
-	vld1.32	{q9},[$key_],#16
-	aesimc	$dat0,$dat0
-	aesimc	$dat1,$dat1
-	aesimc	$dat2,$dat2
-	b.gt	.Loop3x_cbc_dec
-
-	aesd	$dat0,q8
-	aesd	$dat1,q8
-	aesd	$dat2,q8
-	 veor	$tmp0,$ivec,$rndlast
-	aesimc	$dat0,$dat0
-	aesimc	$dat1,$dat1
-	aesimc	$dat2,$dat2
-	 veor	$tmp1,$in0,$rndlast
-	aesd	$dat0,q9
-	aesd	$dat1,q9
-	aesd	$dat2,q9
-	 veor	$tmp2,$in1,$rndlast
-	 subs	$len,$len,#0x30
-	aesimc	$dat0,$dat0
-	aesimc	$dat1,$dat1
-	aesimc	$dat2,$dat2
-	 vorr	$ivec,$in2,$in2
-	 mov.lo	x6,$len			// x6, $cnt, is zero at this point
-	aesd	$dat0,q12
-	aesd	$dat1,q12
-	aesd	$dat2,q12
-	 add	$inp,$inp,x6		// $inp is adjusted in such way that
-					// at exit from the loop $dat1-$dat2
-					// are loaded with last "words"
-	aesimc	$dat0,$dat0
-	aesimc	$dat1,$dat1
-	aesimc	$dat2,$dat2
-	 mov	$key_,$key
-	aesd	$dat0,q13
-	aesd	$dat1,q13
-	aesd	$dat2,q13
-	 vld1.8	{$in0},[$inp],#16
-	aesimc	$dat0,$dat0
-	aesimc	$dat1,$dat1
-	aesimc	$dat2,$dat2
-	 vld1.8	{$in1},[$inp],#16
-	aesd	$dat0,q14
-	aesd	$dat1,q14
-	aesd	$dat2,q14
-	 vld1.8	{$in2},[$inp],#16
-	aesimc	$dat0,$dat0
-	aesimc	$dat1,$dat1
-	aesimc	$dat2,$dat2
-	 vld1.32 {q8},[$key_],#16	// re-pre-load rndkey[0]
-	aesd	$dat0,q15
-	aesd	$dat1,q15
-	aesd	$dat2,q15
-
-	 add	$cnt,$rounds,#2
-	veor	$tmp0,$tmp0,$dat0
-	veor	$tmp1,$tmp1,$dat1
-	veor	$dat2,$dat2,$tmp2
-	 vld1.32 {q9},[$key_],#16	// re-pre-load rndkey[1]
-	 vorr	$dat0,$in0,$in0
-	vst1.8	{$tmp0},[$out],#16
-	 vorr	$dat1,$in1,$in1
-	vst1.8	{$tmp1},[$out],#16
-	vst1.8	{$dat2},[$out],#16
-	 vorr	$dat2,$in2,$in2
-	b.hs	.Loop3x_cbc_dec
-
-	cmn	$len,#0x30
-	b.eq	.Lcbc_done
-	nop
-
-.Lcbc_dec_tail:
-	aesd	$dat1,q8
-	aesd	$dat2,q8
-	vld1.32	{q8},[$key_],#16
-	aesimc	$dat1,$dat1
-	aesimc	$dat2,$dat2
-	subs	$cnt,$cnt,#2
-	aesd	$dat1,q9
-	aesd	$dat2,q9
-	vld1.32	{q9},[$key_],#16
-	aesimc	$dat1,$dat1
-	aesimc	$dat2,$dat2
-	b.gt	.Lcbc_dec_tail
-
-	aesd	$dat1,q8
-	aesd	$dat2,q8
-	aesimc	$dat1,$dat1
-	aesimc	$dat2,$dat2
-	aesd	$dat1,q9
-	aesd	$dat2,q9
-	aesimc	$dat1,$dat1
-	aesimc	$dat2,$dat2
-	aesd	$dat1,q12
-	aesd	$dat2,q12
-	aesimc	$dat1,$dat1
-	aesimc	$dat2,$dat2
-	 cmn	$len,#0x20
-	aesd	$dat1,q13
-	aesd	$dat2,q13
-	aesimc	$dat1,$dat1
-	aesimc	$dat2,$dat2
-	 veor	$tmp1,$ivec,$rndlast
-	aesd	$dat1,q14
-	aesd	$dat2,q14
-	aesimc	$dat1,$dat1
-	aesimc	$dat2,$dat2
-	 veor	$tmp2,$in1,$rndlast
-	aesd	$dat1,q15
-	aesd	$dat2,q15
-	b.eq	.Lcbc_dec_one
-	veor	$tmp1,$tmp1,$dat1
-	veor	$tmp2,$tmp2,$dat2
-	 vorr	$ivec,$in2,$in2
-	vst1.8	{$tmp1},[$out],#16
-	vst1.8	{$tmp2},[$out],#16
-	b	.Lcbc_done
-
-.Lcbc_dec_one:
-	veor	$tmp1,$tmp1,$dat2
-	 vorr	$ivec,$in2,$in2
-	vst1.8	{$tmp1},[$out],#16
-
-.Lcbc_done:
-	vst1.8	{$ivec},[$ivp]
-.Lcbc_abort:
-___
-}
-$code.=<<___	if ($flavour !~ /64/);
-	vldmia	sp!,{d8-d15}
-	ldmia	sp!,{r4-r8,pc}
-___
-$code.=<<___	if ($flavour =~ /64/);
-	ldr	x29,[sp],#16
-	ret
-___
-$code.=<<___;
-.size	${prefix}_cbc_encrypt,.-${prefix}_cbc_encrypt
-___
-}}}
-{{{
-my ($inp,$out,$len,$key,$ivp)=map("x$_",(0..4));
-my ($rounds,$cnt,$key_)=("w5","w6","x7");
-my ($ctr,$tctr0,$tctr1,$tctr2)=map("w$_",(8..10,12));
-my $step="x12";		# aliases with $tctr2
-
-my ($dat0,$dat1,$in0,$in1,$tmp0,$tmp1,$ivec,$rndlast)=map("q$_",(0..7));
-my ($dat2,$in2,$tmp2)=map("q$_",(10,11,9));
-
-my ($dat,$tmp)=($dat0,$tmp0);
-
-### q8-q15	preloaded key schedule
-
-$code.=<<___;
-.globl	${prefix}_ctr32_encrypt_blocks
-.type	${prefix}_ctr32_encrypt_blocks,%function
-.align	5
-${prefix}_ctr32_encrypt_blocks:
-___
-$code.=<<___	if ($flavour =~ /64/);
-	stp		x29,x30,[sp,#-16]!
-	add		x29,sp,#0
-___
-$code.=<<___	if ($flavour !~ /64/);
-	mov		ip,sp
-	stmdb		sp!,{r4-r10,lr}
-	vstmdb		sp!,{d8-d15}            @ ABI specification says so
-	ldr		r4, [ip]		@ load remaining arg
-___
-$code.=<<___;
-	ldr		$rounds,[$key,#240]
-
-	ldr		$ctr, [$ivp, #12]
-	vld1.32		{$dat0},[$ivp]
-
-	vld1.32		{q8-q9},[$key]		// load key schedule...
-	sub		$rounds,$rounds,#4
-	mov		$step,#16
-	cmp		$len,#2
-	add		$key_,$key,x5,lsl#4	// pointer to last 5 round keys
-	sub		$rounds,$rounds,#2
-	vld1.32		{q12-q13},[$key_],#32
-	vld1.32		{q14-q15},[$key_],#32
-	vld1.32		{$rndlast},[$key_]
-	add		$key_,$key,#32
-	mov		$cnt,$rounds
-	cclr		$step,lo
-#ifndef __ARMEB__
-	rev		$ctr, $ctr
-#endif
-	vorr		$dat1,$dat0,$dat0
-	add		$tctr1, $ctr, #1
-	vorr		$dat2,$dat0,$dat0
-	add		$ctr, $ctr, #2
-	vorr		$ivec,$dat0,$dat0
-	rev		$tctr1, $tctr1
-	vmov.32		${dat1}[3],$tctr1
-	b.ls		.Lctr32_tail
-	rev		$tctr2, $ctr
-	sub		$len,$len,#3		// bias
-	vmov.32		${dat2}[3],$tctr2
-	b		.Loop3x_ctr32
-
-.align	4
-.Loop3x_ctr32:
-	aese		$dat0,q8
-	aese		$dat1,q8
-	aese		$dat2,q8
-	vld1.32		{q8},[$key_],#16
-	aesmc		$dat0,$dat0
-	aesmc		$dat1,$dat1
-	aesmc		$dat2,$dat2
-	subs		$cnt,$cnt,#2
-	aese		$dat0,q9
-	aese		$dat1,q9
-	aese		$dat2,q9
-	vld1.32		{q9},[$key_],#16
-	aesmc		$dat0,$dat0
-	aesmc		$dat1,$dat1
-	aesmc		$dat2,$dat2
-	b.gt		.Loop3x_ctr32
-
-	aese		$dat0,q8
-	aese		$dat1,q8
-	aese		$dat2,q8
-	 mov		$key_,$key
-	aesmc		$tmp0,$dat0
-	 vld1.8		{$in0},[$inp],#16
-	aesmc		$tmp1,$dat1
-	aesmc		$dat2,$dat2
-	 vorr		$dat0,$ivec,$ivec
-	aese		$tmp0,q9
-	 vld1.8		{$in1},[$inp],#16
-	aese		$tmp1,q9
-	aese		$dat2,q9
-	 vorr		$dat1,$ivec,$ivec
-	aesmc		$tmp0,$tmp0
-	 vld1.8		{$in2},[$inp],#16
-	aesmc		$tmp1,$tmp1
-	aesmc		$tmp2,$dat2
-	 vorr		$dat2,$ivec,$ivec
-	 add		$tctr0,$ctr,#1
-	aese		$tmp0,q12
-	aese		$tmp1,q12
-	aese		$tmp2,q12
-	 veor		$in0,$in0,$rndlast
-	 add		$tctr1,$ctr,#2
-	aesmc		$tmp0,$tmp0
-	aesmc		$tmp1,$tmp1
-	aesmc		$tmp2,$tmp2
-	 veor		$in1,$in1,$rndlast
-	 add		$ctr,$ctr,#3
-	aese		$tmp0,q13
-	aese		$tmp1,q13
-	aese		$tmp2,q13
-	 veor		$in2,$in2,$rndlast
-	 rev		$tctr0,$tctr0
-	aesmc		$tmp0,$tmp0
-	 vld1.32	 {q8},[$key_],#16	// re-pre-load rndkey[0]
-	aesmc		$tmp1,$tmp1
-	aesmc		$tmp2,$tmp2
-	 vmov.32	${dat0}[3], $tctr0
-	 rev		$tctr1,$tctr1
-	aese		$tmp0,q14
-	aese		$tmp1,q14
-	aese		$tmp2,q14
-	 vmov.32	${dat1}[3], $tctr1
-	 rev		$tctr2,$ctr
-	aesmc		$tmp0,$tmp0
-	aesmc		$tmp1,$tmp1
-	aesmc		$tmp2,$tmp2
-	 vmov.32	${dat2}[3], $tctr2
-	 subs		$len,$len,#3
-	aese		$tmp0,q15
-	aese		$tmp1,q15
-	aese		$tmp2,q15
-
-	 mov		$cnt,$rounds
-	veor		$in0,$in0,$tmp0
-	veor		$in1,$in1,$tmp1
-	veor		$in2,$in2,$tmp2
-	 vld1.32	 {q9},[$key_],#16	// re-pre-load rndkey[1]
-	vst1.8		{$in0},[$out],#16
-	vst1.8		{$in1},[$out],#16
-	vst1.8		{$in2},[$out],#16
-	b.hs		.Loop3x_ctr32
-
-	adds		$len,$len,#3
-	b.eq		.Lctr32_done
-	cmp		$len,#1
-	mov		$step,#16
-	cclr		$step,eq
-
-.Lctr32_tail:
-	aese		$dat0,q8
-	aese		$dat1,q8
-	vld1.32		{q8},[$key_],#16
-	aesmc		$dat0,$dat0
-	aesmc		$dat1,$dat1
-	subs		$cnt,$cnt,#2
-	aese		$dat0,q9
-	aese		$dat1,q9
-	vld1.32		{q9},[$key_],#16
-	aesmc		$dat0,$dat0
-	aesmc		$dat1,$dat1
-	b.gt		.Lctr32_tail
-
-	aese		$dat0,q8
-	aese		$dat1,q8
-	aesmc		$dat0,$dat0
-	aesmc		$dat1,$dat1
-	aese		$dat0,q9
-	aese		$dat1,q9
-	aesmc		$dat0,$dat0
-	aesmc		$dat1,$dat1
-	 vld1.8		{$in0},[$inp],$step
-	aese		$dat0,q12
-	aese		$dat1,q12
-	 vld1.8		{$in1},[$inp]
-	aesmc		$dat0,$dat0
-	aesmc		$dat1,$dat1
-	aese		$dat0,q13
-	aese		$dat1,q13
-	aesmc		$dat0,$dat0
-	aesmc		$dat1,$dat1
-	aese		$dat0,q14
-	aese		$dat1,q14
-	 veor		$in0,$in0,$rndlast
-	aesmc		$dat0,$dat0
-	aesmc		$dat1,$dat1
-	 veor		$in1,$in1,$rndlast
-	aese		$dat0,q15
-	aese		$dat1,q15
-
-	cmp		$len,#1
-	veor		$in0,$in0,$dat0
-	veor		$in1,$in1,$dat1
-	vst1.8		{$in0},[$out],#16
-	b.eq		.Lctr32_done
-	vst1.8		{$in1},[$out]
-
-.Lctr32_done:
-___
-$code.=<<___	if ($flavour !~ /64/);
-	vldmia		sp!,{d8-d15}
-	ldmia		sp!,{r4-r10,pc}
-___
-$code.=<<___	if ($flavour =~ /64/);
-	ldr		x29,[sp],#16
-	ret
-___
-$code.=<<___;
-.size	${prefix}_ctr32_encrypt_blocks,.-${prefix}_ctr32_encrypt_blocks
-___
-}}}
-$code.=<<___;
-#endif
-___
-########################################
-if ($flavour =~ /64/) {			######## 64-bit code
-    my %opcode = (
-	"aesd"	=>	0x4e285800,	"aese"	=>	0x4e284800,
-	"aesimc"=>	0x4e287800,	"aesmc"	=>	0x4e286800	);
-
-    local *unaes = sub {
-	my ($mnemonic,$arg)=@_;
-
-	$arg =~ m/[qv]([0-9]+)[^,]*,\s*[qv]([0-9]+)/o	&&
-	sprintf ".inst\t0x%08x\t//%s %s",
-			$opcode{$mnemonic}|$1|($2<<5),
-			$mnemonic,$arg;
-    };
-
-    foreach(split("\n",$code)) {
-	s/\`([^\`]*)\`/eval($1)/geo;
-
-	s/\bq([0-9]+)\b/"v".($1<8?$1:$1+8).".16b"/geo;	# old->new registers
-	s/@\s/\/\//o;			# old->new style commentary
-
-	#s/[v]?(aes\w+)\s+([qv].*)/unaes($1,$2)/geo	or
-	s/cclr\s+([wx])([^,]+),\s*([a-z]+)/csel	$1$2,$1zr,$1$2,$3/o	or
-	s/mov\.([a-z]+)\s+([wx][0-9]+),\s*([wx][0-9]+)/csel	$2,$3,$2,$1/o	or
-	s/vmov\.i8/movi/o	or	# fix up legacy mnemonics
-	s/vext\.8/ext/o		or
-	s/vrev32\.8/rev32/o	or
-	s/vtst\.8/cmtst/o	or
-	s/vshr/ushr/o		or
-	s/^(\s+)v/$1/o		or	# strip off v prefix
-	s/\bbx\s+lr\b/ret/o;
-
-	# fix up remainig legacy suffixes
-	s/\.[ui]?8//o;
-	m/\],#8/o and s/\.16b/\.8b/go;
-	s/\.[ui]?32//o and s/\.16b/\.4s/go;
-	s/\.[ui]?64//o and s/\.16b/\.2d/go;
-	s/\.[42]([sd])\[([0-3])\]/\.$1\[$2\]/o;
-
-	print $_,"\n";
-    }
-} else {				######## 32-bit code
-    my %opcode = (
-	"aesd"	=>	0xf3b00340,	"aese"	=>	0xf3b00300,
-	"aesimc"=>	0xf3b003c0,	"aesmc"	=>	0xf3b00380	);
-
-    local *unaes = sub {
-	my ($mnemonic,$arg)=@_;
-
-	if ($arg =~ m/[qv]([0-9]+)[^,]*,\s*[qv]([0-9]+)/o) {
-	    my $word = $opcode{$mnemonic}|(($1&7)<<13)|(($1&8)<<19)
-					 |(($2&7)<<1) |(($2&8)<<2);
-	    # since ARMv7 instructions are always encoded little-endian.
-	    # correct solution is to use .inst directive, but older
-	    # assemblers don't implement it:-(
-	    sprintf ".byte\t0x%02x,0x%02x,0x%02x,0x%02x\t@ %s %s",
-			$word&0xff,($word>>8)&0xff,
-			($word>>16)&0xff,($word>>24)&0xff,
-			$mnemonic,$arg;
-	}
-    };
-
-    sub unvtbl {
-	my $arg=shift;
-
-	$arg =~ m/q([0-9]+),\s*\{q([0-9]+)\},\s*q([0-9]+)/o &&
-	sprintf	"vtbl.8	d%d,{q%d},d%d\n\t".
-		"vtbl.8	d%d,{q%d},d%d", 2*$1,$2,2*$3, 2*$1+1,$2,2*$3+1;	
-    }
-
-    sub unvdup32 {
-	my $arg=shift;
-
-	$arg =~ m/q([0-9]+),\s*q([0-9]+)\[([0-3])\]/o &&
-	sprintf	"vdup.32	q%d,d%d[%d]",$1,2*$2+($3>>1),$3&1;	
-    }
-
-    sub unvmov32 {
-	my $arg=shift;
-
-	$arg =~ m/q([0-9]+)\[([0-3])\],(.*)/o &&
-	sprintf	"vmov.32	d%d[%d],%s",2*$1+($2>>1),$2&1,$3;	
-    }
-
-    foreach(split("\n",$code)) {
-	s/\`([^\`]*)\`/eval($1)/geo;
-
-	s/\b[wx]([0-9]+)\b/r$1/go;		# new->old registers
-	s/\bv([0-9])\.[12468]+[bsd]\b/q$1/go;	# new->old registers
-	s/\/\/\s?/@ /o;				# new->old style commentary
-
-	# fix up remainig new-style suffixes
-	s/\{q([0-9]+)\},\s*\[(.+)\],#8/sprintf "{d%d},[$2]!",2*$1/eo	or
-	s/\],#[0-9]+/]!/o;
-
-	s/[v]?(aes\w+)\s+([qv].*)/unaes($1,$2)/geo	or
-	s/cclr\s+([^,]+),\s*([a-z]+)/mov$2	$1,#0/o	or
-	s/vtbl\.8\s+(.*)/unvtbl($1)/geo			or
-	s/vdup\.32\s+(.*)/unvdup32($1)/geo		or
-	s/vmov\.32\s+(.*)/unvmov32($1)/geo		or
-	s/^(\s+)b\./$1b/o				or
-	s/^(\s+)mov\./$1mov/o				or
-	s/^(\s+)ret/$1bx\tlr/o;
-
-	print $_,"\n";
-    }
-}
-
-close STDOUT;
--- a/crypto/aes/asm/bsaes-armv7.pl
+++ b/crypto/aes/asm/bsaes-armv7.pl
--- a/crypto/aes/asm/bsaes-x86_64.pl
+++ b/crypto/aes/asm/bsaes-x86_64.pl
--- a/crypto/aes/asm/vpaes-ppc.pl
+++ b/crypto/aes/asm/vpaes-ppc.pl
--- a/crypto/aes/asm/vpaes-x86.pl
+++ b/crypto/aes/asm/vpaes-x86.pl
@@ -1,903 +0,0 @@
-#!/usr/bin/env perl
-
-######################################################################
-## Constant-time SSSE3 AES core implementation.
-## version 0.1
-##
-## By Mike Hamburg (Stanford University), 2009
-## Public domain.
-##
-## For details see http://shiftleft.org/papers/vector_aes/ and
-## http://crypto.stanford.edu/vpaes/.
-
-######################################################################
-# September 2011.
-#
-# Port vpaes-x86_64.pl as 32-bit "almost" drop-in replacement for
-# aes-586.pl. "Almost" refers to the fact that AES_cbc_encrypt
-# doesn't handle partial vectors (doesn't have to if called from
-# EVP only). "Drop-in" implies that this module doesn't share key
-# schedule structure with the original nor does it make assumption
-# about its alignment...
-#
-# Performance summary. aes-586.pl column lists large-block CBC
-# encrypt/decrypt/with-hyper-threading-off(*) results in cycles per
-# byte processed with 128-bit key, and vpaes-x86.pl column - [also
-# large-block CBC] encrypt/decrypt.
-#
-#		aes-586.pl		vpaes-x86.pl
-#
-# Core 2(**)	28.1/41.4/18.3		21.9/25.2(***)
-# Nehalem	27.9/40.4/18.1		10.2/11.9
-# Atom		70.7/92.1/60.1		61.1/75.4(***)
-# Silvermont	45.4/62.9/24.1		49.2/61.1(***)
-#
-# (*)	"Hyper-threading" in the context refers rather to cache shared
-#	among multiple cores, than to specifically Intel HTT. As vast
-#	majority of contemporary cores share cache, slower code path
-#	is common place. In other words "with-hyper-threading-off"
-#	results are presented mostly for reference purposes.
-#
-# (**)	"Core 2" refers to initial 65nm design, a.k.a. Conroe.
-#
-# (***)	Less impressive improvement on Core 2 and Atom is due to slow
-#	pshufb,	yet it's respectable +28%/64%  improvement on Core 2
-#	and +15% on Atom (as implied, over "hyper-threading-safe"
-#	code path).
-#
-#						<appro@openssl.org>
-
-$0 =~ m/(.*[\/\\])[^\/\\]+$/; $dir=$1;
-push(@INC,"${dir}","${dir}../../perlasm");
-require "x86asm.pl";
-
-&asm_init($ARGV[0],"vpaes-x86.pl",$x86only = $ARGV[$#ARGV] eq "386");
-
-$PREFIX="vpaes";
-
-my  ($round, $base, $magic, $key, $const, $inp, $out)=
-    ("eax",  "ebx", "ecx",  "edx","ebp",  "esi","edi");
-
-&static_label("_vpaes_consts");
-&static_label("_vpaes_schedule_low_round");
-
-&set_label("_vpaes_consts",64);
-$k_inv=-0x30;		# inv, inva
-	&data_word(0x0D080180,0x0E05060F,0x0A0B0C02,0x04070309);
-	&data_word(0x0F0B0780,0x01040A06,0x02050809,0x030D0E0C);
-
-$k_s0F=-0x10;		# s0F
-	&data_word(0x0F0F0F0F,0x0F0F0F0F,0x0F0F0F0F,0x0F0F0F0F);
-
-$k_ipt=0x00;		# input transform (lo, hi)
-	&data_word(0x5A2A7000,0xC2B2E898,0x52227808,0xCABAE090);
-	&data_word(0x317C4D00,0x4C01307D,0xB0FDCC81,0xCD80B1FC);
-
-$k_sb1=0x20;		# sb1u, sb1t
-	&data_word(0xCB503E00,0xB19BE18F,0x142AF544,0xA5DF7A6E);
-	&data_word(0xFAE22300,0x3618D415,0x0D2ED9EF,0x3BF7CCC1);
-$k_sb2=0x40;		# sb2u, sb2t
-	&data_word(0x0B712400,0xE27A93C6,0xBC982FCD,0x5EB7E955);
-	&data_word(0x0AE12900,0x69EB8840,0xAB82234A,0xC2A163C8);
-$k_sbo=0x60;		# sbou, sbot
-	&data_word(0x6FBDC700,0xD0D26D17,0xC502A878,0x15AABF7A);
-	&data_word(0x5FBB6A00,0xCFE474A5,0x412B35FA,0x8E1E90D1);
-
-$k_mc_forward=0x80;	# mc_forward
-	&data_word(0x00030201,0x04070605,0x080B0A09,0x0C0F0E0D);
-	&data_word(0x04070605,0x080B0A09,0x0C0F0E0D,0x00030201);
-	&data_word(0x080B0A09,0x0C0F0E0D,0x00030201,0x04070605);
-	&data_word(0x0C0F0E0D,0x00030201,0x04070605,0x080B0A09);
-
-$k_mc_backward=0xc0;	# mc_backward
-	&data_word(0x02010003,0x06050407,0x0A09080B,0x0E0D0C0F);
-	&data_word(0x0E0D0C0F,0x02010003,0x06050407,0x0A09080B);
-	&data_word(0x0A09080B,0x0E0D0C0F,0x02010003,0x06050407);
-	&data_word(0x06050407,0x0A09080B,0x0E0D0C0F,0x02010003);
-
-$k_sr=0x100;		# sr
-	&data_word(0x03020100,0x07060504,0x0B0A0908,0x0F0E0D0C);
-	&data_word(0x0F0A0500,0x030E0904,0x07020D08,0x0B06010C);
-	&data_word(0x0B020900,0x0F060D04,0x030A0108,0x070E050C);
-	&data_word(0x070A0D00,0x0B0E0104,0x0F020508,0x0306090C);
-
-$k_rcon=0x140;		# rcon
-	&data_word(0xAF9DEEB6,0x1F8391B9,0x4D7C7D81,0x702A9808);
-
-$k_s63=0x150;		# s63: all equal to 0x63 transformed
-	&data_word(0x5B5B5B5B,0x5B5B5B5B,0x5B5B5B5B,0x5B5B5B5B);
-
-$k_opt=0x160;		# output transform
-	&data_word(0xD6B66000,0xFF9F4929,0xDEBE6808,0xF7974121);
-	&data_word(0x50BCEC00,0x01EDBD51,0xB05C0CE0,0xE10D5DB1);
-
-$k_deskew=0x180;	# deskew tables: inverts the sbox's "skew"
-	&data_word(0x47A4E300,0x07E4A340,0x5DBEF91A,0x1DFEB95A);
-	&data_word(0x83EA6900,0x5F36B5DC,0xF49D1E77,0x2841C2AB);
-##
-##  Decryption stuff
-##  Key schedule constants
-##
-$k_dksd=0x1a0;		# decryption key schedule: invskew x*D
-	&data_word(0xA3E44700,0xFEB91A5D,0x5A1DBEF9,0x0740E3A4);
-	&data_word(0xB5368300,0x41C277F4,0xAB289D1E,0x5FDC69EA);
-$k_dksb=0x1c0;		# decryption key schedule: invskew x*B
-	&data_word(0x8550D500,0x9A4FCA1F,0x1CC94C99,0x03D65386);
-	&data_word(0xB6FC4A00,0x115BEDA7,0x7E3482C8,0xD993256F);
-$k_dkse=0x1e0;		# decryption key schedule: invskew x*E + 0x63
-	&data_word(0x1FC9D600,0xD5031CCA,0x994F5086,0x53859A4C);
-	&data_word(0x4FDC7BE8,0xA2319605,0x20B31487,0xCD5EF96A);
-$k_dks9=0x200;		# decryption key schedule: invskew x*9
-	&data_word(0x7ED9A700,0xB6116FC8,0x82255BFC,0x4AED9334);
-	&data_word(0x27143300,0x45765162,0xE9DAFDCE,0x8BB89FAC);
-
-##
-##  Decryption stuff
-##  Round function constants
-##
-$k_dipt=0x220;		# decryption input transform
-	&data_word(0x0B545F00,0x0F505B04,0x114E451A,0x154A411E);
-	&data_word(0x60056500,0x86E383E6,0xF491F194,0x12771772);
-
-$k_dsb9=0x240;		# decryption sbox output *9*u, *9*t
-	&data_word(0x9A86D600,0x851C0353,0x4F994CC9,0xCAD51F50);
-	&data_word(0xECD74900,0xC03B1789,0xB2FBA565,0x725E2C9E);
-$k_dsbd=0x260;		# decryption sbox output *D*u, *D*t
-	&data_word(0xE6B1A200,0x7D57CCDF,0x882A4439,0xF56E9B13);
-	&data_word(0x24C6CB00,0x3CE2FAF7,0x15DEEFD3,0x2931180D);
-$k_dsbb=0x280;		# decryption sbox output *B*u, *B*t
-	&data_word(0x96B44200,0xD0226492,0xB0F2D404,0x602646F6);
-	&data_word(0xCD596700,0xC19498A6,0x3255AA6B,0xF3FF0C3E);
-$k_dsbe=0x2a0;		# decryption sbox output *E*u, *E*t
-	&data_word(0x26D4D000,0x46F29296,0x64B4F6B0,0x22426004);
-	&data_word(0xFFAAC100,0x0C55A6CD,0x98593E32,0x9467F36B);
-$k_dsbo=0x2c0;		# decryption sbox final output
-	&data_word(0x7EF94000,0x1387EA53,0xD4943E2D,0xC7AA6DB9);
-	&data_word(0x93441D00,0x12D7560F,0xD8C58E9C,0xCA4B8159);
-&asciz	("Vector Permutation AES for x86/SSSE3, Mike Hamburg (Stanford University)");
-&align	(64);
-
-&function_begin_B("_vpaes_preheat");
-	&add	($const,&DWP(0,"esp"));
-	&movdqa	("xmm7",&QWP($k_inv,$const));
-	&movdqa	("xmm6",&QWP($k_s0F,$const));
-	&ret	();
-&function_end_B("_vpaes_preheat");
-
-##
-##  _aes_encrypt_core
-##
-##  AES-encrypt %xmm0.
-##
-##  Inputs:
-##     %xmm0 = input
-##     %xmm6-%xmm7 as in _vpaes_preheat
-##    (%edx) = scheduled keys
-##
-##  Output in %xmm0
-##  Clobbers  %xmm1-%xmm5, %eax, %ebx, %ecx, %edx
-##
-##
-&function_begin_B("_vpaes_encrypt_core");
-	&mov	($magic,16);
-	&mov	($round,&DWP(240,$key));
-	&movdqa	("xmm1","xmm6")
-	&movdqa	("xmm2",&QWP($k_ipt,$const));
-	&pandn	("xmm1","xmm0");
-	&pand	("xmm0","xmm6");
-	&movdqu	("xmm5",&QWP(0,$key));
-	&pshufb	("xmm2","xmm0");
-	&movdqa	("xmm0",&QWP($k_ipt+16,$const));
-	&pxor	("xmm2","xmm5");
-	&psrld	("xmm1",4);
-	&add	($key,16);
-	&pshufb	("xmm0","xmm1");
-	&lea	($base,&DWP($k_mc_backward,$const));
-	&pxor	("xmm0","xmm2");
-	&jmp	(&label("enc_entry"));
-
-
-&set_label("enc_loop",16);
-	# middle of middle round
-	&movdqa	("xmm4",&QWP($k_sb1,$const));	# 4 : sb1u
-	&movdqa	("xmm0",&QWP($k_sb1+16,$const));# 0 : sb1t
-	&pshufb	("xmm4","xmm2");		# 4 = sb1u
-	&pshufb	("xmm0","xmm3");		# 0 = sb1t
-	&pxor	("xmm4","xmm5");		# 4 = sb1u + k
-	&movdqa	("xmm5",&QWP($k_sb2,$const));	# 4 : sb2u
-	&pxor	("xmm0","xmm4");		# 0 = A
-	&movdqa	("xmm1",&QWP(-0x40,$base,$magic));# .Lk_mc_forward[]
-	&pshufb	("xmm5","xmm2");		# 4 = sb2u
-	&movdqa	("xmm2",&QWP($k_sb2+16,$const));# 2 : sb2t
-	&movdqa	("xmm4",&QWP(0,$base,$magic));	# .Lk_mc_backward[]
-	&pshufb	("xmm2","xmm3");		# 2 = sb2t
-	&movdqa	("xmm3","xmm0");		# 3 = A
-	&pxor	("xmm2","xmm5");		# 2 = 2A
-	&pshufb	("xmm0","xmm1");		# 0 = B
-	&add	($key,16);			# next key
-	&pxor	("xmm0","xmm2");		# 0 = 2A+B
-	&pshufb	("xmm3","xmm4");		# 3 = D
-	&add	($magic,16);			# next mc
-	&pxor	("xmm3","xmm0");		# 3 = 2A+B+D
-	&pshufb	("xmm0","xmm1");		# 0 = 2B+C
-	&and	($magic,0x30);			# ... mod 4
-	&sub	($round,1);			# nr--
-	&pxor	("xmm0","xmm3");		# 0 = 2A+3B+C+D
-
-&set_label("enc_entry");
-	# top of round
-	&movdqa	("xmm1","xmm6");		# 1 : i
-	&movdqa	("xmm5",&QWP($k_inv+16,$const));# 2 : a/k
-	&pandn	("xmm1","xmm0");		# 1 = i<<4
-	&psrld	("xmm1",4);			# 1 = i
-	&pand	("xmm0","xmm6");		# 0 = k
-	&pshufb	("xmm5","xmm0");		# 2 = a/k
-	&movdqa	("xmm3","xmm7");		# 3 : 1/i
-	&pxor	("xmm0","xmm1");		# 0 = j
-	&pshufb	("xmm3","xmm1");		# 3 = 1/i
-	&movdqa	("xmm4","xmm7");		# 4 : 1/j
-	&pxor	("xmm3","xmm5");		# 3 = iak = 1/i + a/k
-	&pshufb	("xmm4","xmm0");		# 4 = 1/j
-	&movdqa	("xmm2","xmm7");		# 2 : 1/iak
-	&pxor	("xmm4","xmm5");		# 4 = jak = 1/j + a/k
-	&pshufb	("xmm2","xmm3");		# 2 = 1/iak
-	&movdqa	("xmm3","xmm7");		# 3 : 1/jak
-	&pxor	("xmm2","xmm0");		# 2 = io
-	&pshufb	("xmm3","xmm4");		# 3 = 1/jak
-	&movdqu	("xmm5",&QWP(0,$key));
-	&pxor	("xmm3","xmm1");		# 3 = jo
-	&jnz	(&label("enc_loop"));
-
-	# middle of last round
-	&movdqa	("xmm4",&QWP($k_sbo,$const));	# 3 : sbou      .Lk_sbo
-	&movdqa	("xmm0",&QWP($k_sbo+16,$const));# 3 : sbot      .Lk_sbo+16
-	&pshufb	("xmm4","xmm2");		# 4 = sbou
-	&pxor	("xmm4","xmm5");		# 4 = sb1u + k
-	&pshufb	("xmm0","xmm3");		# 0 = sb1t
-	&movdqa	("xmm1",&QWP(0x40,$base,$magic));# .Lk_sr[]
-	&pxor	("xmm0","xmm4");		# 0 = A
-	&pshufb	("xmm0","xmm1");
-	&ret	();
-&function_end_B("_vpaes_encrypt_core");
-
-##
-##  Decryption core
-##
-##  Same API as encryption core.
-##
-&function_begin_B("_vpaes_decrypt_core");
-	&lea	($base,&DWP($k_dsbd,$const));
-	&mov	($round,&DWP(240,$key));
-	&movdqa	("xmm1","xmm6");
-	&movdqa	("xmm2",&QWP($k_dipt-$k_dsbd,$base));
-	&pandn	("xmm1","xmm0");
-	&mov	($magic,$round);
-	&psrld	("xmm1",4)
-	&movdqu	("xmm5",&QWP(0,$key));
-	&shl	($magic,4);
-	&pand	("xmm0","xmm6");
-	&pshufb	("xmm2","xmm0");
-	&movdqa	("xmm0",&QWP($k_dipt-$k_dsbd+16,$base));
-	&xor	($magic,0x30);
-	&pshufb	("xmm0","xmm1");
-	&and	($magic,0x30);
-	&pxor	("xmm2","xmm5");
-	&movdqa	("xmm5",&QWP($k_mc_forward+48,$const));
-	&pxor	("xmm0","xmm2");
-	&add	($key,16);
-	&lea	($magic,&DWP($k_sr-$k_dsbd,$base,$magic));
-	&jmp	(&label("dec_entry"));
-
-&set_label("dec_loop",16);
-##
-##  Inverse mix columns
-##
-	&movdqa	("xmm4",&QWP(-0x20,$base));	# 4 : sb9u
-	&movdqa	("xmm1",&QWP(-0x10,$base));	# 0 : sb9t
-	&pshufb	("xmm4","xmm2");		# 4 = sb9u
-	&pshufb	("xmm1","xmm3");		# 0 = sb9t
-	&pxor	("xmm0","xmm4");
-	&movdqa	("xmm4",&QWP(0,$base));		# 4 : sbdu
-	&pxor	("xmm0","xmm1");		# 0 = ch
-	&movdqa	("xmm1",&QWP(0x10,$base));	# 0 : sbdt
-
-	&pshufb	("xmm4","xmm2");		# 4 = sbdu
-	&pshufb	("xmm0","xmm5");		# MC ch
-	&pshufb	("xmm1","xmm3");		# 0 = sbdt
-	&pxor	("xmm0","xmm4");		# 4 = ch
-	&movdqa	("xmm4",&QWP(0x20,$base));	# 4 : sbbu
-	&pxor	("xmm0","xmm1");		# 0 = ch
-	&movdqa	("xmm1",&QWP(0x30,$base));	# 0 : sbbt
-
-	&pshufb	("xmm4","xmm2");		# 4 = sbbu
-	&pshufb	("xmm0","xmm5");		# MC ch
-	&pshufb	("xmm1","xmm3");		# 0 = sbbt
-	&pxor	("xmm0","xmm4");		# 4 = ch
-	&movdqa	("xmm4",&QWP(0x40,$base));	# 4 : sbeu
-	&pxor	("xmm0","xmm1");		# 0 = ch
-	&movdqa	("xmm1",&QWP(0x50,$base));	# 0 : sbet
-
-	&pshufb	("xmm4","xmm2");		# 4 = sbeu
-	&pshufb	("xmm0","xmm5");		# MC ch
-	&pshufb	("xmm1","xmm3");		# 0 = sbet
-	&pxor	("xmm0","xmm4");		# 4 = ch
-	&add	($key,16);			# next round key
-	&palignr("xmm5","xmm5",12);
-	&pxor	("xmm0","xmm1");		# 0 = ch
-	&sub	($round,1);			# nr--
-
-&set_label("dec_entry");
-	# top of round
-	&movdqa	("xmm1","xmm6");		# 1 : i
-	&movdqa	("xmm2",&QWP($k_inv+16,$const));# 2 : a/k
-	&pandn	("xmm1","xmm0");		# 1 = i<<4
-	&pand	("xmm0","xmm6");		# 0 = k
-	&psrld	("xmm1",4);			# 1 = i
-	&pshufb	("xmm2","xmm0");		# 2 = a/k
-	&movdqa	("xmm3","xmm7");		# 3 : 1/i
-	&pxor	("xmm0","xmm1");		# 0 = j
-	&pshufb	("xmm3","xmm1");		# 3 = 1/i
-	&movdqa	("xmm4","xmm7");		# 4 : 1/j
-	&pxor	("xmm3","xmm2");		# 3 = iak = 1/i + a/k
-	&pshufb	("xmm4","xmm0");		# 4 = 1/j
-	&pxor	("xmm4","xmm2");		# 4 = jak = 1/j + a/k
-	&movdqa	("xmm2","xmm7");		# 2 : 1/iak
-	&pshufb	("xmm2","xmm3");		# 2 = 1/iak
-	&movdqa	("xmm3","xmm7");		# 3 : 1/jak
-	&pxor	("xmm2","xmm0");		# 2 = io
-	&pshufb	("xmm3","xmm4");		# 3 = 1/jak
-	&movdqu	("xmm0",&QWP(0,$key));
-	&pxor	("xmm3","xmm1");		# 3 = jo
-	&jnz	(&label("dec_loop"));
-
-	# middle of last round
-	&movdqa	("xmm4",&QWP(0x60,$base));	# 3 : sbou
-	&pshufb	("xmm4","xmm2");		# 4 = sbou
-	&pxor	("xmm4","xmm0");		# 4 = sb1u + k
-	&movdqa	("xmm0",&QWP(0x70,$base));	# 0 : sbot
-	&movdqa	("xmm2",&QWP(0,$magic));
-	&pshufb	("xmm0","xmm3");		# 0 = sb1t
-	&pxor	("xmm0","xmm4");		# 0 = A
-	&pshufb	("xmm0","xmm2");
-	&ret	();
-&function_end_B("_vpaes_decrypt_core");
-
-########################################################
-##                                                    ##
-##                  AES key schedule                  ##
-##                                                    ##
-########################################################
-&function_begin_B("_vpaes_schedule_core");
-	&add	($const,&DWP(0,"esp"));
-	&movdqu	("xmm0",&QWP(0,$inp));		# load key (unaligned)
-	&movdqa	("xmm2",&QWP($k_rcon,$const));	# load rcon
-
-	# input transform
-	&movdqa	("xmm3","xmm0");
-	&lea	($base,&DWP($k_ipt,$const));
-	&movdqa	(&QWP(4,"esp"),"xmm2");		# xmm8
-	&call	("_vpaes_schedule_transform");
-	&movdqa	("xmm7","xmm0");
-
-	&test	($out,$out);
-	&jnz	(&label("schedule_am_decrypting"));
-
-	# encrypting, output zeroth round key after transform
-	&movdqu	(&QWP(0,$key),"xmm0");
-	&jmp	(&label("schedule_go"));
-
-&set_label("schedule_am_decrypting");
-	# decrypting, output zeroth round key after shiftrows
-	&movdqa	("xmm1",&QWP($k_sr,$const,$magic));
-	&pshufb	("xmm3","xmm1");
-	&movdqu	(&QWP(0,$key),"xmm3");
-	&xor	($magic,0x30);
-
-&set_label("schedule_go");
-	&cmp	($round,192);
-	&ja	(&label("schedule_256"));
-	&je	(&label("schedule_192"));
-	# 128: fall though
-
-##
-##  .schedule_128
-##
-##  128-bit specific part of key schedule.
-##
-##  This schedule is really simple, because all its parts
-##  are accomplished by the subroutines.
-##
-&set_label("schedule_128");
-	&mov	($round,10);
-
-&set_label("loop_schedule_128");
-	&call	("_vpaes_schedule_round");
-	&dec	($round);
-	&jz	(&label("schedule_mangle_last"));
-	&call	("_vpaes_schedule_mangle");	# write output
-	&jmp	(&label("loop_schedule_128"));
-
-##
-##  .aes_schedule_192
-##
-##  192-bit specific part of key schedule.
-##
-##  The main body of this schedule is the same as the 128-bit
-##  schedule, but with more smearing.  The long, high side is
-##  stored in %xmm7 as before, and the short, low side is in
-##  the high bits of %xmm6.
-##
-##  This schedule is somewhat nastier, however, because each
-##  round produces 192 bits of key material, or 1.5 round keys.
-##  Therefore, on each cycle we do 2 rounds and produce 3 round
-##  keys.
-##
-&set_label("schedule_192",16);
-	&movdqu	("xmm0",&QWP(8,$inp));		# load key part 2 (very unaligned)
-	&call	("_vpaes_schedule_transform");	# input transform	
-	&movdqa	("xmm6","xmm0");		# save short part
-	&pxor	("xmm4","xmm4");		# clear 4
-	&movhlps("xmm6","xmm4");		# clobber low side with zeros
-	&mov	($round,4);
-
-&set_label("loop_schedule_192");
-	&call	("_vpaes_schedule_round");
-	&palignr("xmm0","xmm6",8);
-	&call	("_vpaes_schedule_mangle");	# save key n
-	&call	("_vpaes_schedule_192_smear");
-	&call	("_vpaes_schedule_mangle");	# save key n+1
-	&call	("_vpaes_schedule_round");
-	&dec	($round);
-	&jz	(&label("schedule_mangle_last"));
-	&call	("_vpaes_schedule_mangle");	# save key n+2
-	&call	("_vpaes_schedule_192_smear");
-	&jmp	(&label("loop_schedule_192"));
-
-##
-##  .aes_schedule_256
-##
-##  256-bit specific part of key schedule.
-##
-##  The structure here is very similar to the 128-bit
-##  schedule, but with an additional "low side" in
-##  %xmm6.  The low side's rounds are the same as the
-##  high side's, except no rcon and no rotation.
-##
-&set_label("schedule_256",16);
-	&movdqu	("xmm0",&QWP(16,$inp));		# load key part 2 (unaligned)
-	&call	("_vpaes_schedule_transform");	# input transform	
-	&mov	($round,7);
-
-&set_label("loop_schedule_256");
-	&call	("_vpaes_schedule_mangle");	# output low result
-	&movdqa	("xmm6","xmm0");		# save cur_lo in xmm6
-
-	# high round
-	&call	("_vpaes_schedule_round");
-	&dec	($round);
-	&jz	(&label("schedule_mangle_last"));
-	&call	("_vpaes_schedule_mangle");	
-
-	# low round. swap xmm7 and xmm6
-	&pshufd	("xmm0","xmm0",0xFF);
-	&movdqa	(&QWP(20,"esp"),"xmm7");
-	&movdqa	("xmm7","xmm6");
-	&call	("_vpaes_schedule_low_round");
-	&movdqa	("xmm7",&QWP(20,"esp"));
-
-	&jmp	(&label("loop_schedule_256"));
-
-##
-##  .aes_schedule_mangle_last
-##
-##  Mangler for last round of key schedule
-##  Mangles %xmm0
-##    when encrypting, outputs out(%xmm0) ^ 63
-##    when decrypting, outputs unskew(%xmm0)
-##
-##  Always called right before return... jumps to cleanup and exits
-##
-&set_label("schedule_mangle_last",16);
-	# schedule last round key from xmm0
-	&lea	($base,&DWP($k_deskew,$const));
-	&test	($out,$out);
-	&jnz	(&label("schedule_mangle_last_dec"));
-
-	# encrypting
-	&movdqa	("xmm1",&QWP($k_sr,$const,$magic));
-	&pshufb	("xmm0","xmm1");		# output permute
-	&lea	($base,&DWP($k_opt,$const));	# prepare to output transform
-	&add	($key,32);
-
-&set_label("schedule_mangle_last_dec");
-	&add	($key,-16);
-	&pxor	("xmm0",&QWP($k_s63,$const));
-	&call	("_vpaes_schedule_transform");	# output transform
-	&movdqu	(&QWP(0,$key),"xmm0");		# save last key
-
-	# cleanup
-	&pxor	("xmm0","xmm0");
-	&pxor	("xmm1","xmm1");
-	&pxor	("xmm2","xmm2");
-	&pxor	("xmm3","xmm3");
-	&pxor	("xmm4","xmm4");
-	&pxor	("xmm5","xmm5");
-	&pxor	("xmm6","xmm6");
-	&pxor	("xmm7","xmm7");
-	&ret	();
-&function_end_B("_vpaes_schedule_core");
-
-##
-##  .aes_schedule_192_smear
-##
-##  Smear the short, low side in the 192-bit key schedule.
-##
-##  Inputs:
-##    %xmm7: high side, b  a  x  y
-##    %xmm6:  low side, d  c  0  0
-##    %xmm13: 0
-##
-##  Outputs:
-##    %xmm6: b+c+d  b+c  0  0
-##    %xmm0: b+c+d  b+c  b  a
-##
-&function_begin_B("_vpaes_schedule_192_smear");
-	&pshufd	("xmm1","xmm6",0x80);		# d c 0 0 -> c 0 0 0
-	&pshufd	("xmm0","xmm7",0xFE);		# b a _ _ -> b b b a
-	&pxor	("xmm6","xmm1");		# -> c+d c 0 0
-	&pxor	("xmm1","xmm1");
-	&pxor	("xmm6","xmm0");		# -> b+c+d b+c b a
-	&movdqa	("xmm0","xmm6");
-	&movhlps("xmm6","xmm1");		# clobber low side with zeros
-	&ret	();
-&function_end_B("_vpaes_schedule_192_smear");
-
-##
-##  .aes_schedule_round
-##
-##  Runs one main round of the key schedule on %xmm0, %xmm7
-##
-##  Specifically, runs subbytes on the high dword of %xmm0
-##  then rotates it by one byte and xors into the low dword of
-##  %xmm7.
-##
-##  Adds rcon from low byte of %xmm8, then rotates %xmm8 for
-##  next rcon.
-##
-##  Smears the dwords of %xmm7 by xoring the low into the
-##  second low, result into third, result into highest.
-##
-##  Returns results in %xmm7 = %xmm0.
-##  Clobbers %xmm1-%xmm5.
-##
-&function_begin_B("_vpaes_schedule_round");
-	# extract rcon from xmm8
-	&movdqa	("xmm2",&QWP(8,"esp"));		# xmm8
-	&pxor	("xmm1","xmm1");
-	&palignr("xmm1","xmm2",15);
-	&palignr("xmm2","xmm2",15);
-	&pxor	("xmm7","xmm1");
-
-	# rotate
-	&pshufd	("xmm0","xmm0",0xFF);
-	&palignr("xmm0","xmm0",1);
-
-	# fall through...
-	&movdqa	(&QWP(8,"esp"),"xmm2");		# xmm8
-
-	# low round: same as high round, but no rotation and no rcon.
-&set_label("_vpaes_schedule_low_round");
-	# smear xmm7
-	&movdqa	("xmm1","xmm7");
-	&pslldq	("xmm7",4);
-	&pxor	("xmm7","xmm1");
-	&movdqa	("xmm1","xmm7");
-	&pslldq	("xmm7",8);
-	&pxor	("xmm7","xmm1");
-	&pxor	("xmm7",&QWP($k_s63,$const));
-
-	# subbyte
-	&movdqa	("xmm4",&QWP($k_s0F,$const));
-	&movdqa	("xmm5",&QWP($k_inv,$const));	# 4 : 1/j
-	&movdqa	("xmm1","xmm4");	
-	&pandn	("xmm1","xmm0");
-	&psrld	("xmm1",4);			# 1 = i
-	&pand	("xmm0","xmm4");		# 0 = k
-	&movdqa	("xmm2",&QWP($k_inv+16,$const));# 2 : a/k
-	&pshufb	("xmm2","xmm0");		# 2 = a/k
-	&pxor	("xmm0","xmm1");		# 0 = j
-	&movdqa	("xmm3","xmm5");		# 3 : 1/i
-	&pshufb	("xmm3","xmm1");		# 3 = 1/i
-	&pxor	("xmm3","xmm2");		# 3 = iak = 1/i + a/k
-	&movdqa	("xmm4","xmm5");		# 4 : 1/j
-	&pshufb	("xmm4","xmm0");		# 4 = 1/j
-	&pxor	("xmm4","xmm2");		# 4 = jak = 1/j + a/k
-	&movdqa	("xmm2","xmm5");		# 2 : 1/iak
-	&pshufb	("xmm2","xmm3");		# 2 = 1/iak
-	&pxor	("xmm2","xmm0");		# 2 = io
-	&movdqa	("xmm3","xmm5");		# 3 : 1/jak
-	&pshufb	("xmm3","xmm4");		# 3 = 1/jak
-	&pxor	("xmm3","xmm1");		# 3 = jo
-	&movdqa	("xmm4",&QWP($k_sb1,$const));	# 4 : sbou
-	&pshufb	("xmm4","xmm2");		# 4 = sbou
-	&movdqa	("xmm0",&QWP($k_sb1+16,$const));# 0 : sbot
-	&pshufb	("xmm0","xmm3");		# 0 = sb1t
-	&pxor	("xmm0","xmm4");		# 0 = sbox output
-
-	# add in smeared stuff
-	&pxor	("xmm0","xmm7");
-	&movdqa	("xmm7","xmm0");
-	&ret	();
-&function_end_B("_vpaes_schedule_round");
-
-##
-##  .aes_schedule_transform
-##
-##  Linear-transform %xmm0 according to tables at (%ebx)
-##
-##  Output in %xmm0
-##  Clobbers %xmm1, %xmm2
-##
-&function_begin_B("_vpaes_schedule_transform");
-	&movdqa	("xmm2",&QWP($k_s0F,$const));
-	&movdqa	("xmm1","xmm2");
-	&pandn	("xmm1","xmm0");
-	&psrld	("xmm1",4);
-	&pand	("xmm0","xmm2");
-	&movdqa	("xmm2",&QWP(0,$base));
-	&pshufb	("xmm2","xmm0");
-	&movdqa	("xmm0",&QWP(16,$base));
-	&pshufb	("xmm0","xmm1");
-	&pxor	("xmm0","xmm2");
-	&ret	();
-&function_end_B("_vpaes_schedule_transform");
-
-##
-##  .aes_schedule_mangle
-##
-##  Mangle xmm0 from (basis-transformed) standard version
-##  to our version.
-##
-##  On encrypt,
-##    xor with 0x63
-##    multiply by circulant 0,1,1,1
-##    apply shiftrows transform
-##
-##  On decrypt,
-##    xor with 0x63
-##    multiply by "inverse mixcolumns" circulant E,B,D,9
-##    deskew
-##    apply shiftrows transform
-##
-##
-##  Writes out to (%edx), and increments or decrements it
-##  Keeps track of round number mod 4 in %ecx
-##  Preserves xmm0
-##  Clobbers xmm1-xmm5
-##
-&function_begin_B("_vpaes_schedule_mangle");
-	&movdqa	("xmm4","xmm0");	# save xmm0 for later
-	&movdqa	("xmm5",&QWP($k_mc_forward,$const));
-	&test	($out,$out);
-	&jnz	(&label("schedule_mangle_dec"));
-
-	# encrypting
-	&add	($key,16);
-	&pxor	("xmm4",&QWP($k_s63,$const));
-	&pshufb	("xmm4","xmm5");
-	&movdqa	("xmm3","xmm4");
-	&pshufb	("xmm4","xmm5");
-	&pxor	("xmm3","xmm4");
-	&pshufb	("xmm4","xmm5");
-	&pxor	("xmm3","xmm4");
-
-	&jmp	(&label("schedule_mangle_both"));
-
-&set_label("schedule_mangle_dec",16);
-	# inverse mix columns
-	&movdqa	("xmm2",&QWP($k_s0F,$const));
-	&lea	($inp,&DWP($k_dksd,$const));
-	&movdqa	("xmm1","xmm2");
-	&pandn	("xmm1","xmm4");
-	&psrld	("xmm1",4);			# 1 = hi
-	&pand	("xmm4","xmm2");		# 4 = lo
-
-	&movdqa	("xmm2",&QWP(0,$inp));
-	&pshufb	("xmm2","xmm4");
-	&movdqa	("xmm3",&QWP(0x10,$inp));
-	&pshufb	("xmm3","xmm1");
-	&pxor	("xmm3","xmm2");
-	&pshufb	("xmm3","xmm5");
-
-	&movdqa	("xmm2",&QWP(0x20,$inp));
-	&pshufb	("xmm2","xmm4");
-	&pxor	("xmm2","xmm3");
-	&movdqa	("xmm3",&QWP(0x30,$inp));
-	&pshufb	("xmm3","xmm1");
-	&pxor	("xmm3","xmm2");
-	&pshufb	("xmm3","xmm5");
-
-	&movdqa	("xmm2",&QWP(0x40,$inp));
-	&pshufb	("xmm2","xmm4");
-	&pxor	("xmm2","xmm3");
-	&movdqa	("xmm3",&QWP(0x50,$inp));
-	&pshufb	("xmm3","xmm1");
-	&pxor	("xmm3","xmm2");
-	&pshufb	("xmm3","xmm5");
-
-	&movdqa	("xmm2",&QWP(0x60,$inp));
-	&pshufb	("xmm2","xmm4");
-	&pxor	("xmm2","xmm3");
-	&movdqa	("xmm3",&QWP(0x70,$inp));
-	&pshufb	("xmm3","xmm1");
-	&pxor	("xmm3","xmm2");
-
-	&add	($key,-16);
-
-&set_label("schedule_mangle_both");
-	&movdqa	("xmm1",&QWP($k_sr,$const,$magic));
-	&pshufb	("xmm3","xmm1");
-	&add	($magic,-16);
-	&and	($magic,0x30);
-	&movdqu	(&QWP(0,$key),"xmm3");
-	&ret	();
-&function_end_B("_vpaes_schedule_mangle");
-
-#
-# Interface to OpenSSL
-#
-&function_begin("${PREFIX}_set_encrypt_key");
-	&mov	($inp,&wparam(0));		# inp
-	&lea	($base,&DWP(-56,"esp"));
-	&mov	($round,&wparam(1));		# bits
-	&and	($base,-16);
-	&mov	($key,&wparam(2));		# key
-	&xchg	($base,"esp");			# alloca
-	&mov	(&DWP(48,"esp"),$base);
-
-	&mov	($base,$round);
-	&shr	($base,5);
-	&add	($base,5);
-	&mov	(&DWP(240,$key),$base);		# AES_KEY->rounds = nbits/32+5;
-	&mov	($magic,0x30);
-	&mov	($out,0);
-
-	&lea	($const,&DWP(&label("_vpaes_consts")."+0x30-".&label("pic_point")));
-	&call	("_vpaes_schedule_core");
-&set_label("pic_point");
-
-	&mov	("esp",&DWP(48,"esp"));
-	&xor	("eax","eax");
-&function_end("${PREFIX}_set_encrypt_key");
-
-&function_begin("${PREFIX}_set_decrypt_key");
-	&mov	($inp,&wparam(0));		# inp
-	&lea	($base,&DWP(-56,"esp"));
-	&mov	($round,&wparam(1));		# bits
-	&and	($base,-16);
-	&mov	($key,&wparam(2));		# key
-	&xchg	($base,"esp");			# alloca
-	&mov	(&DWP(48,"esp"),$base);
-
-	&mov	($base,$round);
-	&shr	($base,5);
-	&add	($base,5);
-	&mov	(&DWP(240,$key),$base);	# AES_KEY->rounds = nbits/32+5;
-	&shl	($base,4);
-	&lea	($key,&DWP(16,$key,$base));
-
-	&mov	($out,1);
-	&mov	($magic,$round);
-	&shr	($magic,1);
-	&and	($magic,32);
-	&xor	($magic,32);			# nbist==192?0:32;
-
-	&lea	($const,&DWP(&label("_vpaes_consts")."+0x30-".&label("pic_point")));
-	&call	("_vpaes_schedule_core");
-&set_label("pic_point");
-
-	&mov	("esp",&DWP(48,"esp"));
-	&xor	("eax","eax");
-&function_end("${PREFIX}_set_decrypt_key");
-
-&function_begin("${PREFIX}_encrypt");
-	&lea	($const,&DWP(&label("_vpaes_consts")."+0x30-".&label("pic_point")));
-	&call	("_vpaes_preheat");
-&set_label("pic_point");
-	&mov	($inp,&wparam(0));		# inp
-	&lea	($base,&DWP(-56,"esp"));
-	&mov	($out,&wparam(1));		# out
-	&and	($base,-16);
-	&mov	($key,&wparam(2));		# key
-	&xchg	($base,"esp");			# alloca
-	&mov	(&DWP(48,"esp"),$base);
-
-	&movdqu	("xmm0",&QWP(0,$inp));
-	&call	("_vpaes_encrypt_core");
-	&movdqu	(&QWP(0,$out),"xmm0");
-
-	&mov	("esp",&DWP(48,"esp"));
-&function_end("${PREFIX}_encrypt");
-
-&function_begin("${PREFIX}_decrypt");
-	&lea	($const,&DWP(&label("_vpaes_consts")."+0x30-".&label("pic_point")));
-	&call	("_vpaes_preheat");
-&set_label("pic_point");
-	&mov	($inp,&wparam(0));		# inp
-	&lea	($base,&DWP(-56,"esp"));
-	&mov	($out,&wparam(1));		# out
-	&and	($base,-16);
-	&mov	($key,&wparam(2));		# key
-	&xchg	($base,"esp");			# alloca
-	&mov	(&DWP(48,"esp"),$base);
-
-	&movdqu	("xmm0",&QWP(0,$inp));
-	&call	("_vpaes_decrypt_core");
-	&movdqu	(&QWP(0,$out),"xmm0");
-
-	&mov	("esp",&DWP(48,"esp"));
-&function_end("${PREFIX}_decrypt");
-
-&function_begin("${PREFIX}_cbc_encrypt");
-	&mov	($inp,&wparam(0));		# inp
-	&mov	($out,&wparam(1));		# out
-	&mov	($round,&wparam(2));		# len
-	&mov	($key,&wparam(3));		# key
-	&sub	($round,16);
-	&jc	(&label("cbc_abort"));
-	&lea	($base,&DWP(-56,"esp"));
-	&mov	($const,&wparam(4));		# ivp
-	&and	($base,-16);
-	&mov	($magic,&wparam(5));		# enc
-	&xchg	($base,"esp");			# alloca
-	&movdqu	("xmm1",&QWP(0,$const));	# load IV
-	&sub	($out,$inp);
-	&mov	(&DWP(48,"esp"),$base);
-
-	&mov	(&DWP(0,"esp"),$out);		# save out
-	&mov	(&DWP(4,"esp"),$key)		# save key
-	&mov	(&DWP(8,"esp"),$const);		# save ivp
-	&mov	($out,$round);			# $out works as $len
-
-	&lea	($const,&DWP(&label("_vpaes_consts")."+0x30-".&label("pic_point")));
-	&call	("_vpaes_preheat");
-&set_label("pic_point");
-	&cmp	($magic,0);
-	&je	(&label("cbc_dec_loop"));
-	&jmp	(&label("cbc_enc_loop"));
-
-&set_label("cbc_enc_loop",16);
-	&movdqu	("xmm0",&QWP(0,$inp));		# load input
-	&pxor	("xmm0","xmm1");		# inp^=iv
-	&call	("_vpaes_encrypt_core");
-	&mov	($base,&DWP(0,"esp"));		# restore out
-	&mov	($key,&DWP(4,"esp"));		# restore key
-	&movdqa	("xmm1","xmm0");
-	&movdqu	(&QWP(0,$base,$inp),"xmm0");	# write output
-	&lea	($inp,&DWP(16,$inp));
-	&sub	($out,16);
-	&jnc	(&label("cbc_enc_loop"));
-	&jmp	(&label("cbc_done"));
-
-&set_label("cbc_dec_loop",16);
-	&movdqu	("xmm0",&QWP(0,$inp));		# load input
-	&movdqa	(&QWP(16,"esp"),"xmm1");	# save IV
-	&movdqa	(&QWP(32,"esp"),"xmm0");	# save future IV
-	&call	("_vpaes_decrypt_core");
-	&mov	($base,&DWP(0,"esp"));		# restore out
-	&mov	($key,&DWP(4,"esp"));		# restore key
-	&pxor	("xmm0",&QWP(16,"esp"));	# out^=iv
-	&movdqa	("xmm1",&QWP(32,"esp"));	# load next IV
-	&movdqu	(&QWP(0,$base,$inp),"xmm0");	# write output
-	&lea	($inp,&DWP(16,$inp));
-	&sub	($out,16);
-	&jnc	(&label("cbc_dec_loop"));
-
-&set_label("cbc_done");
-	&mov	($base,&DWP(8,"esp"));		# restore ivp
-	&mov	("esp",&DWP(48,"esp"));
-	&movdqu	(&QWP(0,$base),"xmm1");		# write IV
-&set_label("cbc_abort");
-&function_end("${PREFIX}_cbc_encrypt");
-
-&asm_finish();
--- a/crypto/aes/asm/vpaes-x86_64.pl
+++ b/crypto/aes/asm/vpaes-x86_64.pl
--- a/crypto/arm64cpuid.S
+++ b/crypto/arm64cpuid.S
@@ -1,46 +0,0 @@
-#include "arm_arch.h"
-
-.text
-.arch	armv8-a+crypto
-
-.align	5
-.global	_armv7_neon_probe
-.type	_armv7_neon_probe,%function
-_armv7_neon_probe:
-	orr	v15.16b, v15.16b, v15.16b
-	ret
-.size	_armv7_neon_probe,.-_armv7_neon_probe
-
-.global	_armv7_tick
-.type	_armv7_tick,%function
-_armv7_tick:
-	mrs	x0, CNTVCT_EL0
-	ret
-.size	_armv7_tick,.-_armv7_tick
-
-.global	_armv8_aes_probe
-.type	_armv8_aes_probe,%function
-_armv8_aes_probe:
-	aese	v0.16b, v0.16b
-	ret
-.size	_armv8_aes_probe,.-_armv8_aes_probe
-
-.global	_armv8_sha1_probe
-.type	_armv8_sha1_probe,%function
-_armv8_sha1_probe:
-	sha1h	s0, s0
-	ret
-.size	_armv8_sha1_probe,.-_armv8_sha1_probe
-
-.global	_armv8_sha256_probe
-.type	_armv8_sha256_probe,%function
-_armv8_sha256_probe:
-	sha256su0	v0.4s, v0.4s
-	ret
-.size	_armv8_sha256_probe,.-_armv8_sha256_probe
-.global	_armv8_pmull_probe
-.type	_armv8_pmull_probe,%function
-_armv8_pmull_probe:
-	pmull	v0.1q, v0.1d, v0.1d
-	ret
-.size	_armv8_pmull_probe,.-_armv8_pmull_probe
--- a/crypto/arm_arch.h
+++ b/crypto/arm_arch.h
@@ -1,66 +0,0 @@
-#ifndef __ARM_ARCH_H__
-#define __ARM_ARCH_H__
-
-#if !defined(__ARM_ARCH__)
-# if defined(__CC_ARM)
-#  define __ARM_ARCH__ __TARGET_ARCH_ARM
-#  if defined(__BIG_ENDIAN)
-#   define __ARMEB__
-#  else
-#   define __ARMEL__
-#  endif
-# elif defined(__GNUC__)
-#  if	defined(__aarch64__)
-#   define __ARM_ARCH__ 8
-#   if __BYTE_ORDER__==__ORDER_BIG_ENDIAN__
-#    define __ARMEB__
-#   else
-#    define __ARMEL__
-#   endif
-  /*
-   * Why doesn't gcc define __ARM_ARCH__? Instead it defines
-   * bunch of below macros. See all_architectires[] table in
-   * gcc/config/arm/arm.c. On a side note it defines
-   * __ARMEL__/__ARMEB__ for little-/big-endian.
-   */
-#  elif defined(__ARM_ARCH)
-#   define __ARM_ARCH__ __ARM_ARCH
-#  elif	defined(__ARM_ARCH_8A__)
-#   define __ARM_ARCH__ 8
-#  elif	defined(__ARM_ARCH_7__)	|| defined(__ARM_ARCH_7A__)	|| \
-	defined(__ARM_ARCH_7R__)|| defined(__ARM_ARCH_7M__)	|| \
-	defined(__ARM_ARCH_7EM__)
-#   define __ARM_ARCH__ 7
-#  elif	defined(__ARM_ARCH_6__)	|| defined(__ARM_ARCH_6J__)	|| \
-	defined(__ARM_ARCH_6K__)|| defined(__ARM_ARCH_6M__)	|| \
-	defined(__ARM_ARCH_6Z__)|| defined(__ARM_ARCH_6ZK__)	|| \
-	defined(__ARM_ARCH_6T2__)
-#   define __ARM_ARCH__ 6
-#  elif	defined(__ARM_ARCH_5__)	|| defined(__ARM_ARCH_5T__)	|| \
-	defined(__ARM_ARCH_5E__)|| defined(__ARM_ARCH_5TE__)	|| \
-	defined(__ARM_ARCH_5TEJ__)
-#   define __ARM_ARCH__ 5
-#  elif	defined(__ARM_ARCH_4__)	|| defined(__ARM_ARCH_4T__)
-#   define __ARM_ARCH__ 4
-#  else
-#   error "unsupported ARM architecture"
-#  endif
-# endif
-#endif
-
-#ifdef OPENSSL_FIPSCANISTER
-#include <openssl/fipssyms.h>
-#endif
-
-#if !__ASSEMBLER__
-extern unsigned int OPENSSL_armcap_P;
-#endif
-                                     
-#define ARMV7_NEON      (1<<0)
-#define ARMV7_TICK      (1<<1)
-#define ARMV8_AES       (1<<2)
-#define ARMV8_SHA1      (1<<3)
-#define ARMV8_SHA256    (1<<4)
-#define ARMV8_PMULL     (1<<5)
-
-#endif
--- a/crypto/armcap.c
+++ b/crypto/armcap.c
@@ -1,157 +0,0 @@
-#include <stdio.h>
-#include <stdlib.h>
-#include <string.h>
-#include <setjmp.h>
-#include <signal.h>
-#include <crypto.h>
-
-#include "arm_arch.h"
-
-unsigned int OPENSSL_armcap_P;
-
-static sigset_t all_masked;
-
-static sigjmp_buf ill_jmp;
-static void ill_handler (int sig) { siglongjmp(ill_jmp,sig); }
-
-/*
- * Following subroutines could have been inlined, but it's not all
- * ARM compilers support inline assembler...
- */
-void _armv7_neon_probe(void);
-void _armv8_aes_probe(void);
-void _armv8_sha1_probe(void);
-void _armv8_sha256_probe(void);
-void _armv8_pmull_probe(void);
-unsigned long _armv7_tick(void);
-
-unsigned long OPENSSL_rdtsc(void)
-	{
-	if (OPENSSL_armcap_P & ARMV7_TICK)
-		return _armv7_tick();
-	else
-		return 0;
-	}
-
-/*
- * Use a weak reference to getauxval() so we can use it if it is available but
- * don't break the build if it is not.
- */
-#if defined(__GNUC__) && __GNUC__>=2
-void OPENSSL_cpuid_setup(void) __attribute__((constructor));
-extern unsigned long getauxval(unsigned long type) __attribute__((weak));
-#else
-static unsigned long (*getauxval)(unsigned long) = NULL;
-#endif
-
-/*
- * ARM puts the the feature bits for Crypto Extensions in AT_HWCAP2, whereas
- * AArch64 used AT_HWCAP.
- */
-#if defined(__arm__) || defined (__arm)
-# define HWCAP			16	/* AT_HWCAP */
-# define HWCAP_NEON		(1 << 12)
-
-# define HWCAP_CE		26	/* AT_HWCAP2 */
-# define HWCAP_CE_AES		(1 << 0)
-# define HWCAP_CE_PMULL		(1 << 1)
-# define HWCAP_CE_SHA1		(1 << 2)
-# define HWCAP_CE_SHA256	(1 << 3)
-#elif defined(__aarch64__)
-# define HWCAP			16	/* AT_HWCAP */
-# define HWCAP_NEON		(1 << 1)
-
-# define HWCAP_CE		HWCAP
-# define HWCAP_CE_AES		(1 << 3)
-# define HWCAP_CE_PMULL		(1 << 4)
-# define HWCAP_CE_SHA1		(1 << 5)
-# define HWCAP_CE_SHA256	(1 << 6)
-#endif
-
-void OPENSSL_cpuid_setup(void)
-	{
-	char *e;
-	struct sigaction	ill_oact,ill_act;
-	sigset_t		oset;
-	static int trigger=0;
-
-	if (trigger) return;
-	trigger=1;
- 
-	if ((e=getenv("OPENSSL_armcap")))
-		{
-		OPENSSL_armcap_P=(unsigned int)strtoul(e,NULL,0);
-		return;
-		}
-
-	sigfillset(&all_masked);
-	sigdelset(&all_masked,SIGILL);
-	sigdelset(&all_masked,SIGTRAP);
-	sigdelset(&all_masked,SIGFPE);
-	sigdelset(&all_masked,SIGBUS);
-	sigdelset(&all_masked,SIGSEGV);
-
-	OPENSSL_armcap_P = 0;
-
-	memset(&ill_act,0,sizeof(ill_act));
-	ill_act.sa_handler = ill_handler;
-	ill_act.sa_mask    = all_masked;
-
-	sigprocmask(SIG_SETMASK,&ill_act.sa_mask,&oset);
-	sigaction(SIGILL,&ill_act,&ill_oact);
-
-	if (getauxval != NULL)
-		{
-		if (getauxval(HWCAP) & HWCAP_NEON)
-			{
-			unsigned long hwcap = getauxval(HWCAP_CE);
-
-			OPENSSL_armcap_P |= ARMV7_NEON;
-
-			if (hwcap & HWCAP_CE_AES)
-				OPENSSL_armcap_P |= ARMV8_AES;
-
-			if (hwcap & HWCAP_CE_PMULL)
-				OPENSSL_armcap_P |= ARMV8_PMULL;
-
-			if (hwcap & HWCAP_CE_SHA1)
-				OPENSSL_armcap_P |= ARMV8_SHA1;
-
-			if (hwcap & HWCAP_CE_SHA256)
-				OPENSSL_armcap_P |= ARMV8_SHA256;
-			}
-		}
-	else if (sigsetjmp(ill_jmp,1) == 0)
-		{
-		_armv7_neon_probe();
-		OPENSSL_armcap_P |= ARMV7_NEON;
-		if (sigsetjmp(ill_jmp,1) == 0)
-			{
-			_armv8_pmull_probe();
-			OPENSSL_armcap_P |= ARMV8_PMULL|ARMV8_AES;
-			}
-		else if (sigsetjmp(ill_jmp,1) == 0)
-			{
-			_armv8_aes_probe();
-			OPENSSL_armcap_P |= ARMV8_AES;
-			}
-		if (sigsetjmp(ill_jmp,1) == 0)
-			{
-			_armv8_sha1_probe();
-			OPENSSL_armcap_P |= ARMV8_SHA1;
-			}
-		if (sigsetjmp(ill_jmp,1) == 0)
-			{
-			_armv8_sha256_probe();
-			OPENSSL_armcap_P |= ARMV8_SHA256;
-			}
-		}
-	if (sigsetjmp(ill_jmp,1) == 0)
-		{
-		_armv7_tick();
-		OPENSSL_armcap_P |= ARMV7_TICK;
-		}
-
-	sigaction (SIGILL,&ill_oact,NULL);
-	sigprocmask(SIG_SETMASK,&oset,NULL);
-	}
--- a/crypto/armv4cpuid.S
+++ b/crypto/armv4cpuid.S
@@ -1,202 +0,0 @@
-#include "arm_arch.h"
-
-.text
-.code	32
-
-.align	5
-.global	_armv7_neon_probe
-.type	_armv7_neon_probe,%function
-_armv7_neon_probe:
-	.byte	0xf0,0x01,0x60,0xf2	@ vorr	q8,q8,q8
-	.byte	0x1e,0xff,0x2f,0xe1	@ bx	lr
-.size	_armv7_neon_probe,.-_armv7_neon_probe
-
-.global	_armv7_tick
-.type	_armv7_tick,%function
-_armv7_tick:
-	mrrc	p15,1,r0,r1,c14		@ CNTVCT
-#if __ARM_ARCH__>=5
-	bx	lr
-#else
-	.word	0xe12fff1e		@ bx	lr
-#endif
-.size	_armv7_tick,.-_armv7_tick
-
-.global	_armv8_aes_probe
-.type	_armv8_aes_probe,%function
-_armv8_aes_probe:
-	.byte	0x00,0x03,0xb0,0xf3	@ aese.8	q0,q0
-	.byte	0x1e,0xff,0x2f,0xe1	@ bx	lr
-.size	_armv8_aes_probe,.-_armv8_aes_probe
-
-.global	_armv8_sha1_probe
-.type	_armv8_sha1_probe,%function
-_armv8_sha1_probe:
-	.byte	0x40,0x0c,0x00,0xf2	@ sha1c.32	q0,q0,q0
-	.byte	0x1e,0xff,0x2f,0xe1	@ bx	lr
-.size	_armv8_sha1_probe,.-_armv8_sha1_probe
-
-.global	_armv8_sha256_probe
-.type	_armv8_sha256_probe,%function
-_armv8_sha256_probe:
-	.byte	0x40,0x0c,0x00,0xf3	@ sha256h.32	q0,q0,q0
-	.byte	0x1e,0xff,0x2f,0xe1	@ bx lr
-.size	_armv8_sha256_probe,.-_armv8_sha256_probe
-.global	_armv8_pmull_probe
-.type	_armv8_pmull_probe,%function
-_armv8_pmull_probe:
-	.byte	0x00,0x0e,0xa0,0xf2	@ vmull.p64	q0,d0,d0
-	.byte	0x1e,0xff,0x2f,0xe1	@ bx	lr
-.size	_armv8_pmull_probe,.-_armv8_pmull_probe
-
-.align	5
-.global	OPENSSL_atomic_add
-.type	OPENSSL_atomic_add,%function
-OPENSSL_atomic_add:
-#if __ARM_ARCH__>=6
-.Ladd:	ldrex	r2,[r0]
-	add	r3,r2,r1
-	strex	r2,r3,[r0]
-	cmp	r2,#0
-	bne	.Ladd
-	mov	r0,r3
-	bx	lr
-#else
-	stmdb	sp!,{r4-r6,lr}
-	ldr	r2,.Lspinlock
-	adr	r3,.Lspinlock
-	mov	r4,r0
-	mov	r5,r1
-	add	r6,r3,r2	@ &spinlock
-	b	.+8
-.Lspin:	bl	sched_yield
-	mov	r0,#-1
-	swp	r0,r0,[r6]
-	cmp	r0,#0
-	bne	.Lspin
-
-	ldr	r2,[r4]
-	add	r2,r2,r5
-	str	r2,[r4]
-	str	r0,[r6]		@ release spinlock
-	ldmia	sp!,{r4-r6,lr}
-	tst	lr,#1
-	moveq	pc,lr
-	.word	0xe12fff1e	@ bx	lr
-#endif
-.size	OPENSSL_atomic_add,.-OPENSSL_atomic_add
-
-.global	OPENSSL_cleanse
-.type	OPENSSL_cleanse,%function
-OPENSSL_cleanse:
-	eor	ip,ip,ip
-	cmp	r1,#7
-	subhs	r1,r1,#4
-	bhs	.Lot
-	cmp	r1,#0
-	beq	.Lcleanse_done
-.Little:
-	strb	ip,[r0],#1
-	subs	r1,r1,#1
-	bhi	.Little
-	b	.Lcleanse_done
-
-.Lot:	tst	r0,#3
-	beq	.Laligned
-	strb	ip,[r0],#1
-	sub	r1,r1,#1
-	b	.Lot
-.Laligned:
-	str	ip,[r0],#4
-	subs	r1,r1,#4
-	bhs	.Laligned
-	adds	r1,r1,#4
-	bne	.Little
-.Lcleanse_done:
-#if __ARM_ARCH__>=5
-	bx	lr
-#else
-	tst	lr,#1
-	moveq	pc,lr
-	.word	0xe12fff1e	@ bx	lr
-#endif
-.size	OPENSSL_cleanse,.-OPENSSL_cleanse
-
-.global	OPENSSL_wipe_cpu
-.type	OPENSSL_wipe_cpu,%function
-OPENSSL_wipe_cpu:
-	ldr	r0,.LOPENSSL_armcap
-	adr	r1,.LOPENSSL_armcap
-	ldr	r0,[r1,r0]
-	eor	r2,r2,r2
-	eor	r3,r3,r3
-	eor	ip,ip,ip
-	tst	r0,#1
-	beq	.Lwipe_done
-	.byte	0x50,0x01,0x00,0xf3	@ veor	q0, q0, q0
-	.byte	0x52,0x21,0x02,0xf3	@ veor	q1, q1, q1
-	.byte	0x54,0x41,0x04,0xf3	@ veor	q2, q2, q2
-	.byte	0x56,0x61,0x06,0xf3	@ veor	q3, q3, q3
-	.byte	0xf0,0x01,0x40,0xf3	@ veor	q8, q8, q8
-	.byte	0xf2,0x21,0x42,0xf3	@ veor	q9, q9, q9
-	.byte	0xf4,0x41,0x44,0xf3	@ veor	q10, q10, q10
-	.byte	0xf6,0x61,0x46,0xf3	@ veor	q11, q11, q11
-	.byte	0xf8,0x81,0x48,0xf3	@ veor	q12, q12, q12
-	.byte	0xfa,0xa1,0x4a,0xf3	@ veor	q13, q13, q13
-	.byte	0xfc,0xc1,0x4c,0xf3	@ veor	q14, q14, q14
-	.byte	0xfe,0xe1,0x4e,0xf3	@ veor	q14, q14, q14
-.Lwipe_done:
-	mov	r0,sp
-#if __ARM_ARCH__>=5
-	bx	lr
-#else
-	tst	lr,#1
-	moveq	pc,lr
-	.word	0xe12fff1e	@ bx	lr
-#endif
-.size	OPENSSL_wipe_cpu,.-OPENSSL_wipe_cpu
-
-.global	OPENSSL_instrument_bus
-.type	OPENSSL_instrument_bus,%function
-OPENSSL_instrument_bus:
-	eor	r0,r0,r0
-#if __ARM_ARCH__>=5
-	bx	lr
-#else
-	tst	lr,#1
-	moveq	pc,lr
-	.word	0xe12fff1e	@ bx	lr
-#endif
-.size	OPENSSL_instrument_bus,.-OPENSSL_instrument_bus
-
-.global	OPENSSL_instrument_bus2
-.type	OPENSSL_instrument_bus2,%function
-OPENSSL_instrument_bus2:
-	eor	r0,r0,r0
-#if __ARM_ARCH__>=5
-	bx	lr
-#else
-	tst	lr,#1
-	moveq	pc,lr
-	.word	0xe12fff1e	@ bx	lr
-#endif
-.size	OPENSSL_instrument_bus2,.-OPENSSL_instrument_bus2
-
-.align	5
-.LOPENSSL_armcap:
-.word	OPENSSL_armcap_P-.LOPENSSL_armcap
-#if __ARM_ARCH__>=6
-.align	5
-#else
-.Lspinlock:
-.word	atomic_add_spinlock-.Lspinlock
-.align	5
-
-.data
-.align	2
-atomic_add_spinlock:
-.word	0
-#endif
-
-.comm	OPENSSL_armcap_P,4,4
-.hidden	OPENSSL_armcap_P
--- a/crypto/asn1/Makefile
+++ b/crypto/asn1/Makefile
@@ -174,7 +174,7 @@ a_gentm.o: ../../include/openssl/err.h ../../include/openssl/lhash.h
 a_gentm.o: ../../include/openssl/opensslconf.h ../../include/openssl/opensslv.h
 a_gentm.o: ../../include/openssl/ossl_typ.h ../../include/openssl/safestack.h
 a_gentm.o: ../../include/openssl/stack.h ../../include/openssl/symhacks.h
-a_gentm.o: ../cryptlib.h ../o_time.h a_gentm.c asn1_locl.h
+a_gentm.o: ../cryptlib.h ../o_time.h a_gentm.c
 a_i2d_fp.o: ../../e_os.h ../../include/openssl/asn1.h
 a_i2d_fp.o: ../../include/openssl/bio.h ../../include/openssl/buffer.h
 a_i2d_fp.o: ../../include/openssl/crypto.h ../../include/openssl/e_os2.h
@@ -275,7 +275,6 @@ a_time.o: ../../include/openssl/lhash.h ../../include/openssl/opensslconf.h
 a_time.o: ../../include/openssl/opensslv.h ../../include/openssl/ossl_typ.h
 a_time.o: ../../include/openssl/safestack.h ../../include/openssl/stack.h
 a_time.o: ../../include/openssl/symhacks.h ../cryptlib.h ../o_time.h a_time.c
-a_time.o: asn1_locl.h
 a_type.o: ../../e_os.h ../../include/openssl/asn1.h
 a_type.o: ../../include/openssl/asn1t.h ../../include/openssl/bio.h
 a_type.o: ../../include/openssl/buffer.h ../../include/openssl/crypto.h
@@ -292,7 +291,7 @@ a_utctm.o: ../../include/openssl/err.h ../../include/openssl/lhash.h
 a_utctm.o: ../../include/openssl/opensslconf.h ../../include/openssl/opensslv.h
 a_utctm.o: ../../include/openssl/ossl_typ.h ../../include/openssl/safestack.h
 a_utctm.o: ../../include/openssl/stack.h ../../include/openssl/symhacks.h
-a_utctm.o: ../cryptlib.h ../o_time.h a_utctm.c asn1_locl.h
+a_utctm.o: ../cryptlib.h ../o_time.h a_utctm.c
 a_utf8.o: ../../e_os.h ../../include/openssl/asn1.h ../../include/openssl/bio.h
 a_utf8.o: ../../include/openssl/buffer.h ../../include/openssl/crypto.h
 a_utf8.o: ../../include/openssl/e_os2.h ../../include/openssl/err.h
@@ -640,7 +639,7 @@ t_x509.o: ../../include/openssl/rsa.h ../../include/openssl/safestack.h
 t_x509.o: ../../include/openssl/sha.h ../../include/openssl/stack.h
 t_x509.o: ../../include/openssl/symhacks.h ../../include/openssl/x509.h
 t_x509.o: ../../include/openssl/x509_vfy.h ../../include/openssl/x509v3.h
-t_x509.o: ../cryptlib.h asn1_locl.h t_x509.c
+t_x509.o: ../cryptlib.h t_x509.c
 t_x509a.o: ../../e_os.h ../../include/openssl/asn1.h
 t_x509a.o: ../../include/openssl/bio.h ../../include/openssl/buffer.h
 t_x509a.o: ../../include/openssl/crypto.h ../../include/openssl/e_os2.h
--- a/crypto/asn1/a_digest.c
+++ b/crypto/asn1/a_digest.c
@@ -87,8 +87,7 @@ int ASN1_digest(i2d_of_void *i2d, const EVP_MD *type, char *data,
 	p=str;
 	i2d(data,&p);

-	if (!EVP_Digest(str, i, md, len, type, NULL))
-		return 0;
+	EVP_Digest(str, i, md, len, type, NULL);
 	OPENSSL_free(str);
 	return(1);
 	}
@@ -105,8 +104,7 @@ int ASN1_item_digest(const ASN1_ITEM *it, const EVP_MD *type, void *asn,
 	i=ASN1_item_i2d(asn,&str, it);
 	if (!str) return(0);

-	if (!EVP_Digest(str, i, md, len, type, NULL))
-		return 0;
+	EVP_Digest(str, i, md, len, type, NULL);
 	OPENSSL_free(str);
 	return(1);
 	}
--- a/crypto/asn1/a_gentm.c
+++ b/crypto/asn1/a_gentm.c
@@ -63,7 +63,6 @@
 #include "cryptlib.h"
 #include "o_time.h"
 #include <openssl/asn1.h>
-#include "asn1_locl.h"

 #if 0

@@ -116,7 +115,7 @@ err:

 #endif

-int asn1_generalizedtime_to_tm(struct tm *tm, const ASN1_GENERALIZEDTIME *d)
+int ASN1_GENERALIZEDTIME_check(ASN1_GENERALIZEDTIME *d)
 	{
 	static const int min[9]={ 0, 0, 1, 1, 0, 0, 0, 0, 0};
 	static const int max[9]={99, 99,12,31,23,59,59,12,59};
@@ -136,12 +135,7 @@ int asn1_generalizedtime_to_tm(struct tm *tm, const ASN1_GENERALIZEDTIME *d)
 		{
 		if ((i == 6) && ((a[o] == 'Z') ||
 			(a[o] == '+') || (a[o] == '-')))
-			{
-			i++;
-			if (tm)
-				tm->tm_sec = 0;
-			break;
-			}
+			{ i++; break; }
 		if ((a[o] < '0') || (a[o] > '9')) goto err;
 		n= a[o]-'0';
 		if (++o > l) goto err;
@@ -151,33 +145,6 @@ int asn1_generalizedtime_to_tm(struct tm *tm, const ASN1_GENERALIZEDTIME *d)
 		if (++o > l) goto err;

 		if ((n < min[i]) || (n > max[i])) goto err;
-		if (tm)
-			{
-			switch(i)
-				{
-			case 0:
-				tm->tm_year = n * 100 - 1900;
-				break;
-			case 1:
-				tm->tm_year += n;
-				break;
-			case 2:
-				tm->tm_mon = n - 1;
-				break;
-			case 3:
-				tm->tm_mday = n;
-				break;
-			case 4:
-				tm->tm_hour = n;
-				break;
-			case 5:
-				tm->tm_min = n;
-				break;
-			case 6:
-				tm->tm_sec = n;
-				break;
-				}
-			}
 		}
 	/* Optional fractional seconds: decimal point followed by one
 	 * or more digits.
@@ -196,7 +163,6 @@ int asn1_generalizedtime_to_tm(struct tm *tm, const ASN1_GENERALIZEDTIME *d)
 		o++;
 	else if ((a[o] == '+') || (a[o] == '-'))
 		{
-		int offsign = a[o] == '-' ? -1 : 1, offset = 0;
 		o++;
 		if (o+4 > l) goto err;
 		for (i=7; i<9; i++)
@@ -207,19 +173,10 @@ int asn1_generalizedtime_to_tm(struct tm *tm, const ASN1_GENERALIZEDTIME *d)
 			if ((a[o] < '0') || (a[o] > '9')) goto err;
 			n=(n*10)+ a[o]-'0';
 			if ((n < min[i]) || (n > max[i])) goto err;
-			if (tm)
-				{
-				if (i == 7)
-					offset = n * 3600;
-				else if (i == 8)
-					offset += n * 60;
-				}
 			o++;
 			}
-		if (offset && !OPENSSL_gmtime_adj(tm, 0, offset * offsign))
-			return 0;
 		}
-	else if (a[o])
+	else
 		{
 		/* Missing time zone information. */
 		goto err;
@@ -229,11 +186,6 @@ err:
 	return(0);
 	}

-int ASN1_GENERALIZEDTIME_check(const ASN1_GENERALIZEDTIME *d)
-	{
-	return asn1_generalizedtime_to_tm(NULL, d);
-	}
-
 int ASN1_GENERALIZEDTIME_set_string(ASN1_GENERALIZEDTIME *s, const char *str)
 	{
 	ASN1_GENERALIZEDTIME t;
--- a/crypto/asn1/a_sign.c
+++ b/crypto/asn1/a_sign.c
@@ -184,9 +184,9 @@ int ASN1_sign(i2d_of_void *i2d, X509_ALGOR *algor1, X509_ALGOR *algor2,
 	p=buf_in;

 	i2d(data,&p);
-	if (!EVP_SignInit_ex(&ctx,type, NULL)
-		|| !EVP_SignUpdate(&ctx,(unsigned char *)buf_in,inl)
-		|| !EVP_SignFinal(&ctx,(unsigned char *)buf_out,
+	EVP_SignInit_ex(&ctx,type, NULL);
+	EVP_SignUpdate(&ctx,(unsigned char *)buf_in,inl);
+	if (!EVP_SignFinal(&ctx,(unsigned char *)buf_out,
 			(unsigned int *)&outl,pkey))
 		{
 		outl=0;
@@ -218,100 +218,65 @@ int ASN1_item_sign(const ASN1_ITEM *it, X509_ALGOR *algor1, X509_ALGOR *algor2,
 	     const EVP_MD *type)
 	{
 	EVP_MD_CTX ctx;
-	EVP_MD_CTX_init(&ctx);
-	if (!EVP_DigestSignInit(&ctx, NULL, type, NULL, pkey))
-		{
-		EVP_MD_CTX_cleanup(&ctx);
-		return 0;
-		}
-	return ASN1_item_sign_ctx(it, algor1, algor2, signature, asn, &ctx);
-	}
-		
-
-int ASN1_item_sign_ctx(const ASN1_ITEM *it,
-		X509_ALGOR *algor1, X509_ALGOR *algor2,
-	     	ASN1_BIT_STRING *signature, void *asn, EVP_MD_CTX *ctx)
-	{
-	const EVP_MD *type;
-	EVP_PKEY *pkey;
 	unsigned char *buf_in=NULL,*buf_out=NULL;
-	size_t inl=0,outl=0,outll=0;
+	int inl=0,outl=0,outll=0;
 	int signid, paramtype;
-	int rv;

-	type = EVP_MD_CTX_md(ctx);
-	pkey = EVP_PKEY_CTX_get0_pkey(ctx->pctx);
-
-	if (!type || !pkey)
+	if (type == NULL)
 		{
-		ASN1err(ASN1_F_ASN1_ITEM_SIGN_CTX, ASN1_R_CONTEXT_NOT_INITIALISED);
+		int def_nid;
+		if (EVP_PKEY_get_default_digest_nid(pkey, &def_nid) > 0)
+			type = EVP_get_digestbynid(def_nid);
+		}
+
+	if (type == NULL)
+		{
+		ASN1err(ASN1_F_ASN1_ITEM_SIGN, ASN1_R_NO_DEFAULT_DIGEST);
 		return 0;
 		}

-	if (pkey->ameth->item_sign)
+	if (type->flags & EVP_MD_FLAG_PKEY_METHOD_SIGNATURE)
 		{
-		rv = pkey->ameth->item_sign(ctx, it, asn, algor1, algor2,
-						signature);
-		if (rv == 1)
-			outl = signature->length;
-		/* Return value meanings:
-		 * <=0: error.
-		 *   1: method does everything.
-		 *   2: carry on as normal.
-		 *   3: ASN1 method sets algorithm identifiers: just sign.
-		 */
-		if (rv <= 0)
-			ASN1err(ASN1_F_ASN1_ITEM_SIGN_CTX, ERR_R_EVP_LIB);
-		if (rv <= 1)
-			goto err;
+		if (!pkey->ameth ||
+			!OBJ_find_sigid_by_algs(&signid, EVP_MD_nid(type),
+						pkey->ameth->pkey_id))
+			{
+			ASN1err(ASN1_F_ASN1_ITEM_SIGN,
+				ASN1_R_DIGEST_AND_KEY_TYPE_NOT_SUPPORTED);
+			return 0;
+			}
 		}
 	else
-		rv = 2;
+		signid = type->pkey_type;

-	if (rv == 2)
-		{
-		if (type->flags & EVP_MD_FLAG_PKEY_METHOD_SIGNATURE)
-			{
-			if (!pkey->ameth ||
-				!OBJ_find_sigid_by_algs(&signid,
-							EVP_MD_nid(type),
-							pkey->ameth->pkey_id))
-				{
-				ASN1err(ASN1_F_ASN1_ITEM_SIGN_CTX,
-					ASN1_R_DIGEST_AND_KEY_TYPE_NOT_SUPPORTED);
-				return 0;
-				}
-			}
-		else
-			signid = type->pkey_type;
+	if (pkey->ameth->pkey_flags & ASN1_PKEY_SIGPARAM_NULL)
+		paramtype = V_ASN1_NULL;
+	else
+		paramtype = V_ASN1_UNDEF;

-		if (pkey->ameth->pkey_flags & ASN1_PKEY_SIGPARAM_NULL)
-			paramtype = V_ASN1_NULL;
-		else
-			paramtype = V_ASN1_UNDEF;
-
-		if (algor1)
-			X509_ALGOR_set0(algor1, OBJ_nid2obj(signid), paramtype, NULL);
-		if (algor2)
-			X509_ALGOR_set0(algor2, OBJ_nid2obj(signid), paramtype, NULL);
-
-		}
+	if (algor1)
+		X509_ALGOR_set0(algor1, OBJ_nid2obj(signid), paramtype, NULL);
+	if (algor2)
+		X509_ALGOR_set0(algor2, OBJ_nid2obj(signid), paramtype, NULL);

+	EVP_MD_CTX_init(&ctx);
 	inl=ASN1_item_i2d(asn,&buf_in, it);
 	outll=outl=EVP_PKEY_size(pkey);
-	buf_out=OPENSSL_malloc((unsigned int)outl);
+	buf_out=(unsigned char *)OPENSSL_malloc((unsigned int)outl);
 	if ((buf_in == NULL) || (buf_out == NULL))
 		{
 		outl=0;
-		ASN1err(ASN1_F_ASN1_ITEM_SIGN_CTX,ERR_R_MALLOC_FAILURE);
+		ASN1err(ASN1_F_ASN1_ITEM_SIGN,ERR_R_MALLOC_FAILURE);
 		goto err;
 		}

-	if (!EVP_DigestSignUpdate(ctx, buf_in, inl)
-		|| !EVP_DigestSignFinal(ctx, buf_out, &outl))
+	EVP_SignInit_ex(&ctx,type, NULL);
+	EVP_SignUpdate(&ctx,(unsigned char *)buf_in,inl);
+	if (!EVP_SignFinal(&ctx,(unsigned char *)buf_out,
+			(unsigned int *)&outl,pkey))
 		{
 		outl=0;
-		ASN1err(ASN1_F_ASN1_ITEM_SIGN_CTX,ERR_R_EVP_LIB);
+		ASN1err(ASN1_F_ASN1_ITEM_SIGN,ERR_R_EVP_LIB);
 		goto err;
 		}
 	if (signature->data != NULL) OPENSSL_free(signature->data);
@@ -324,7 +289,7 @@ int ASN1_item_sign_ctx(const ASN1_ITEM *it,
 	signature->flags&= ~(ASN1_STRING_FLAG_BITS_LEFT|0x07);
 	signature->flags|=ASN1_STRING_FLAG_BITS_LEFT;
 err:
-	EVP_MD_CTX_cleanup(ctx);
+	EVP_MD_CTX_cleanup(&ctx);
 	if (buf_in != NULL)
 		{ OPENSSL_cleanse((char *)buf_in,(unsigned int)inl); OPENSSL_free(buf_in); }
 	if (buf_out != NULL)
--- a/crypto/asn1/a_strex.c
+++ b/crypto/asn1/a_strex.c
@@ -568,7 +568,6 @@ int ASN1_STRING_to_UTF8(unsigned char **out, ASN1_STRING *in)
 	mbflag |= MBSTRING_FLAG;
 	stmp.data = NULL;
 	stmp.length = 0;
-	stmp.flags = 0;
 	ret = ASN1_mbstring_copy(&str, in->data, in->length, mbflag, B_ASN1_UTF8STRING);
 	if(ret < 0) return ret;
 	*out = stmp.data;
--- a/crypto/asn1/a_time.c
+++ b/crypto/asn1/a_time.c
@@ -66,7 +66,6 @@
 #include "cryptlib.h"
 #include "o_time.h"
 #include <openssl/asn1t.h>
-#include "asn1_locl.h"

 IMPLEMENT_ASN1_MSTRING(ASN1_TIME, B_ASN1_TIME)

@@ -197,33 +196,3 @@ int ASN1_TIME_set_string(ASN1_TIME *s, const char *str)

 	return 1;
 	}
-
-static int asn1_time_to_tm(struct tm *tm, const ASN1_TIME *t)
-	{
-	if (t == NULL)
-		{
-		time_t now_t;
-		time(&now_t);
-		if (OPENSSL_gmtime(&now_t, tm))
-			return 1;
-		return 0;
-		}
-		
-	if (t->type == V_ASN1_UTCTIME)
-		return asn1_utctime_to_tm(tm, t);
-	else if (t->type == V_ASN1_GENERALIZEDTIME)
-		return asn1_generalizedtime_to_tm(tm, t);
-
-	return 0;
-	}
-
-int ASN1_TIME_diff(int *pday, int *psec,
-			const ASN1_TIME *from, const ASN1_TIME *to)
-	{
-	struct tm tm_from, tm_to;
-	if (!asn1_time_to_tm(&tm_from, from))
-		return 0;
-	if (!asn1_time_to_tm(&tm_to, to))
-		return 0;
-	return OPENSSL_gmtime_diff(pday, psec, &tm_from, &tm_to);
-	}	
--- a/crypto/asn1/a_utctm.c
+++ b/crypto/asn1/a_utctm.c
@@ -61,7 +61,6 @@
 #include "cryptlib.h"
 #include "o_time.h"
 #include <openssl/asn1.h>
-#include "asn1_locl.h"

 #if 0
 int i2d_ASN1_UTCTIME(ASN1_UTCTIME *a, unsigned char **pp)
@@ -113,7 +112,7 @@ err:

 #endif

-int asn1_utctime_to_tm(struct tm *tm, const ASN1_UTCTIME *d)
+int ASN1_UTCTIME_check(ASN1_UTCTIME *d)
 	{
 	static const int min[8]={ 0, 1, 1, 0, 0, 0, 0, 0};
 	static const int max[8]={99,12,31,23,59,59,12,59};
@@ -130,12 +129,7 @@ int asn1_utctime_to_tm(struct tm *tm, const ASN1_UTCTIME *d)
 		{
 		if ((i == 5) && ((a[o] == 'Z') ||
 			(a[o] == '+') || (a[o] == '-')))
-			{
-			i++;
-			if (tm)
-				tm->tm_sec = 0;
-			break;
-			}
+			{ i++; break; }
 		if ((a[o] < '0') || (a[o] > '9')) goto err;
 		n= a[o]-'0';
 		if (++o > l) goto err;
@@ -145,36 +139,11 @@ int asn1_utctime_to_tm(struct tm *tm, const ASN1_UTCTIME *d)
 		if (++o > l) goto err;

 		if ((n < min[i]) || (n > max[i])) goto err;
-		if (tm)
-			{
-			switch(i)
-				{
-			case 0:
-				tm->tm_year = n < 50 ? n + 100 : n;
-				break;
-			case 1:
-				tm->tm_mon = n - 1;
-				break;
-			case 2:
-				tm->tm_mday = n;
-				break;
-			case 3:
-				tm->tm_hour = n;
-				break;
-			case 4:
-				tm->tm_min = n;
-				break;
-			case 5:
-				tm->tm_sec = n;
-				break;
-				}
-			}
 		}
 	if (a[o] == 'Z')
 		o++;
 	else if ((a[o] == '+') || (a[o] == '-'))
 		{
-		int offsign = a[o] == '-' ? -1 : 1, offset = 0;
 		o++;
 		if (o+4 > l) goto err;
 		for (i=6; i<8; i++)
@@ -185,26 +154,12 @@ int asn1_utctime_to_tm(struct tm *tm, const ASN1_UTCTIME *d)
 			if ((a[o] < '0') || (a[o] > '9')) goto err;
 			n=(n*10)+ a[o]-'0';
 			if ((n < min[i]) || (n > max[i])) goto err;
-			if (tm)
-				{
-				if (i == 6)
-					offset = n * 3600;
-				else if (i == 7)
-					offset += n * 60;
-				}
 			o++;
 			}
-		if (offset && !OPENSSL_gmtime_adj(tm, 0, offset * offsign))
-			return 0;
 		}
-	return o == l;
+	return(o == l);
 err:
-	return 0;
-	}
-
-int ASN1_UTCTIME_check(const ASN1_UTCTIME *d)
-	{
-	return asn1_utctime_to_tm(NULL, d);
+	return(0);
 	}

 int ASN1_UTCTIME_set_string(ASN1_UTCTIME *s, const char *str)
@@ -296,26 +251,39 @@ ASN1_UTCTIME *ASN1_UTCTIME_adj(ASN1_UTCTIME *s, time_t t,

 int ASN1_UTCTIME_cmp_time_t(const ASN1_UTCTIME *s, time_t t)
 	{
-	struct tm stm, ttm;
-	int day, sec;
+	struct tm *tm;
+	struct tm data;
+	int offset;
+	int year;

-	if (!asn1_utctime_to_tm(&stm, s))
-		return -2;
+#define g2(p) (((p)[0]-'0')*10+(p)[1]-'0')

-	if (!OPENSSL_gmtime(&t, &ttm))
-		return -2;
+	if (s->data[12] == 'Z')
+		offset=0;
+	else
+		{
+		offset = g2(s->data+13)*60+g2(s->data+15);
+		if (s->data[12] == '-')
+			offset = -offset;
+		}

-	if (!OPENSSL_gmtime_diff(&day, &sec, &stm, &ttm))
-		return -2;
+	t -= offset*60; /* FIXME: may overflow in extreme cases */
+
+	tm = OPENSSL_gmtime(&t, &data);
+	
+#define return_cmp(a,b) if ((a)<(b)) return -1; else if ((a)>(b)) return 1
+	year = g2(s->data);
+	if (year < 50)
+		year += 100;
+	return_cmp(year,              tm->tm_year);
+	return_cmp(g2(s->data+2) - 1, tm->tm_mon);
+	return_cmp(g2(s->data+4),     tm->tm_mday);
+	return_cmp(g2(s->data+6),     tm->tm_hour);
+	return_cmp(g2(s->data+8),     tm->tm_min);
+	return_cmp(g2(s->data+10),    tm->tm_sec);
+#undef g2
+#undef return_cmp

-	if (day > 0)
-		return 1;
-	if (day < 0)
-		return -1;
-	if (sec > 0)
-		return 1;
-	if (sec < 0)
-		return -1;
 	return 0;
 	}

--- a/crypto/asn1/a_verify.c
+++ b/crypto/asn1/a_verify.c
@@ -101,13 +101,8 @@ int ASN1_verify(i2d_of_void *i2d, X509_ALGOR *a, ASN1_BIT_STRING *signature,
 	p=buf_in;

 	i2d(data,&p);
-	if (!EVP_VerifyInit_ex(&ctx,type, NULL)
-		|| !EVP_VerifyUpdate(&ctx,(unsigned char *)buf_in,inl))
-		{
-		ASN1err(ASN1_F_ASN1_VERIFY,ERR_R_EVP_LIB);
-		ret=0;
-		goto err;
-		}
+	EVP_VerifyInit_ex(&ctx,type, NULL);
+	EVP_VerifyUpdate(&ctx,(unsigned char *)buf_in,inl);

 	OPENSSL_cleanse(buf_in,(unsigned int)inl);
 	OPENSSL_free(buf_in);
@@ -131,10 +126,11 @@ err:
 #endif


-int ASN1_item_verify(const ASN1_ITEM *it, X509_ALGOR *a,
-		ASN1_BIT_STRING *signature, void *asn, EVP_PKEY *pkey)
+int ASN1_item_verify(const ASN1_ITEM *it, X509_ALGOR *a, ASN1_BIT_STRING *signature,
+	     void *asn, EVP_PKEY *pkey)
 	{
 	EVP_MD_CTX ctx;
+	const EVP_MD *type = NULL;
 	unsigned char *buf_in=NULL;
 	int ret= -1,inl;

@@ -154,47 +150,25 @@ int ASN1_item_verify(const ASN1_ITEM *it, X509_ALGOR *a,
 		ASN1err(ASN1_F_ASN1_ITEM_VERIFY,ASN1_R_UNKNOWN_SIGNATURE_ALGORITHM);
 		goto err;
 		}
-	if (mdnid == NID_undef)
+	type=EVP_get_digestbynid(mdnid);
+	if (type == NULL)
 		{
-		if (!pkey->ameth || !pkey->ameth->item_verify)
-			{
-			ASN1err(ASN1_F_ASN1_ITEM_VERIFY,ASN1_R_UNKNOWN_SIGNATURE_ALGORITHM);
-			goto err;
-			}
-		ret = pkey->ameth->item_verify(&ctx, it, asn, a,
-							signature, pkey);
-		/* Return value of 2 means carry on, anything else means we
-		 * exit straight away: either a fatal error of the underlying
-		 * verification routine handles all verification.
-		 */
-		if (ret != 2)
-			goto err;
-		ret = -1;
+		ASN1err(ASN1_F_ASN1_ITEM_VERIFY,ASN1_R_UNKNOWN_MESSAGE_DIGEST_ALGORITHM);
+		goto err;
 		}
-	else
+
+	/* Check public key OID matches public key type */
+	if (EVP_PKEY_type(pknid) != pkey->ameth->pkey_id)
 		{
-		const EVP_MD *type;
-		type=EVP_get_digestbynid(mdnid);
-		if (type == NULL)
-			{
-			ASN1err(ASN1_F_ASN1_ITEM_VERIFY,ASN1_R_UNKNOWN_MESSAGE_DIGEST_ALGORITHM);
-			goto err;
-			}
-
-		/* Check public key OID matches public key type */
-		if (EVP_PKEY_type(pknid) != pkey->ameth->pkey_id)
-			{
-			ASN1err(ASN1_F_ASN1_ITEM_VERIFY,ASN1_R_WRONG_PUBLIC_KEY_TYPE);
-			goto err;
-			}
-
-		if (!EVP_DigestVerifyInit(&ctx, NULL, type, NULL, pkey))
-			{
-			ASN1err(ASN1_F_ASN1_ITEM_VERIFY,ERR_R_EVP_LIB);
-			ret=0;
-			goto err;
-			}
+		ASN1err(ASN1_F_ASN1_ITEM_VERIFY,ASN1_R_WRONG_PUBLIC_KEY_TYPE);
+		goto err;
+		}

+	if (!EVP_VerifyInit_ex(&ctx,type, NULL))
+		{
+		ASN1err(ASN1_F_ASN1_ITEM_VERIFY,ERR_R_EVP_LIB);
+		ret=0;
+		goto err;
 		}

 	inl = ASN1_item_i2d(asn, &buf_in, it);
@@ -205,18 +179,13 @@ int ASN1_item_verify(const ASN1_ITEM *it, X509_ALGOR *a,
 		goto err;
 		}

-	if (!EVP_DigestVerifyUpdate(&ctx,buf_in,inl))
-		{
-		ASN1err(ASN1_F_ASN1_ITEM_VERIFY,ERR_R_EVP_LIB);
-		ret=0;
-		goto err;
-		}
+	EVP_VerifyUpdate(&ctx,(unsigned char *)buf_in,inl);

 	OPENSSL_cleanse(buf_in,(unsigned int)inl);
 	OPENSSL_free(buf_in);

-	if (EVP_DigestVerifyFinal(&ctx,signature->data,
-			(size_t)signature->length) <= 0)
+	if (EVP_VerifyFinal(&ctx,(unsigned char *)signature->data,
+			(unsigned int)signature->length,pkey) <= 0)
 		{
 		ASN1err(ASN1_F_ASN1_ITEM_VERIFY,ERR_R_EVP_LIB);
 		ret=0;
--- a/crypto/asn1/ameth_lib.c
+++ b/crypto/asn1/ameth_lib.c
@@ -67,10 +67,8 @@
 extern const EVP_PKEY_ASN1_METHOD rsa_asn1_meths[];
 extern const EVP_PKEY_ASN1_METHOD dsa_asn1_meths[];
 extern const EVP_PKEY_ASN1_METHOD dh_asn1_meth;
-extern const EVP_PKEY_ASN1_METHOD dhx_asn1_meth;
 extern const EVP_PKEY_ASN1_METHOD eckey_asn1_meth;
 extern const EVP_PKEY_ASN1_METHOD hmac_asn1_meth;
-extern const EVP_PKEY_ASN1_METHOD cmac_asn1_meth;

 /* Keep this sorted in type order !! */
 static const EVP_PKEY_ASN1_METHOD *standard_methods[] = 
@@ -92,11 +90,7 @@ static const EVP_PKEY_ASN1_METHOD *standard_methods[] =
 #ifndef OPENSSL_NO_EC
 	&eckey_asn1_meth,
 #endif
-	&hmac_asn1_meth,
-	&cmac_asn1_meth,
-#ifndef OPENSSL_NO_DH
-	&dhx_asn1_meth
-#endif
+	&hmac_asn1_meth
 	};

 typedef int sk_cmp_fn_type(const char * const *a, const char * const *b);
@@ -302,8 +296,6 @@ EVP_PKEY_ASN1_METHOD* EVP_PKEY_asn1_new(int id, int flags,
 	if (!ameth)
 		return NULL;

-	memset(ameth, 0, sizeof(EVP_PKEY_ASN1_METHOD));
-
 	ameth->pkey_id = id;
 	ameth->pkey_base_id = id;
 	ameth->pkey_flags = flags | ASN1_PKEY_DYNAMIC;
@@ -338,9 +330,6 @@ EVP_PKEY_ASN1_METHOD* EVP_PKEY_asn1_new(int id, int flags,
 	ameth->old_priv_encode = 0;
 	ameth->old_priv_decode = 0;

-	ameth->item_verify = 0;
-	ameth->item_sign = 0;
-
 	ameth->pkey_size = 0;
 	ameth->pkey_bits = 0;

@@ -392,9 +381,6 @@ void EVP_PKEY_asn1_copy(EVP_PKEY_ASN1_METHOD *dst,
 	dst->pkey_free = src->pkey_free;
 	dst->pkey_ctrl = src->pkey_ctrl;

-	dst->item_sign = src->item_sign;
-	dst->item_verify = src->item_verify;
-
 	}

 void EVP_PKEY_asn1_free(EVP_PKEY_ASN1_METHOD *ameth)
--- a/crypto/asn1/asn1.h
+++ b/crypto/asn1/asn1.h
@@ -208,14 +208,14 @@ typedef struct asn1_const_ctx_st
 #define ASN1_OBJECT_FLAG_CRITICAL	 0x02	/* critical x509v3 object id */
 #define ASN1_OBJECT_FLAG_DYNAMIC_STRINGS 0x04	/* internal use */
 #define ASN1_OBJECT_FLAG_DYNAMIC_DATA 	 0x08	/* internal use */
-struct asn1_object_st
+typedef struct asn1_object_st
 	{
 	const char *sn,*ln;
 	int nid;
 	int length;
 	const unsigned char *data;	/* data remains const after init */
 	int flags;	/* Should we free this one */
-	};
+	} ASN1_OBJECT;

 #define ASN1_STRING_FLAG_BITS_LEFT 0x08 /* Set if 0x07 has bits left value */
 /* This indicates that the ASN1_STRING is not a real value but just a place
@@ -235,7 +235,7 @@ struct asn1_object_st
 */
 #define ASN1_STRING_FLAG_MSTRING 0x040 
 /* This is the base type that holds just about everything :-) */
-struct asn1_string_st
+typedef struct asn1_string_st
 	{
 	int length;
 	int type;
@@ -245,7 +245,7 @@ struct asn1_string_st
 	 * input data has a non-zero 'unused bits' value, it will be
 	 * handled correctly */
 	long flags;
-	};
+	} ASN1_STRING;

 /* ASN1_ENCODING structure: this is used to save the received
 * encoding of an ASN1 type. This is useful to get round
@@ -293,6 +293,7 @@ DECLARE_STACK_OF(ASN1_STRING_TABLE)
 * see asn1t.h
 */
 typedef struct ASN1_TEMPLATE_st ASN1_TEMPLATE;
+typedef struct ASN1_ITEM_st ASN1_ITEM;
 typedef struct ASN1_TLC_st ASN1_TLC;
 /* This is just an opaque pointer */
 typedef struct ASN1_VALUE_st ASN1_VALUE;
@@ -839,7 +840,7 @@ int ASN1_INTEGER_cmp(const ASN1_INTEGER *x, const ASN1_INTEGER *y);

 DECLARE_ASN1_FUNCTIONS(ASN1_ENUMERATED)

-int ASN1_UTCTIME_check(const ASN1_UTCTIME *a);
+int ASN1_UTCTIME_check(ASN1_UTCTIME *a);
 ASN1_UTCTIME *ASN1_UTCTIME_set(ASN1_UTCTIME *s,time_t t);
 ASN1_UTCTIME *ASN1_UTCTIME_adj(ASN1_UTCTIME *s, time_t t,
 				int offset_day, long offset_sec);
@@ -849,13 +850,11 @@ int ASN1_UTCTIME_cmp_time_t(const ASN1_UTCTIME *s, time_t t);
 time_t ASN1_UTCTIME_get(const ASN1_UTCTIME *s);
 #endif

-int ASN1_GENERALIZEDTIME_check(const ASN1_GENERALIZEDTIME *a);
+int ASN1_GENERALIZEDTIME_check(ASN1_GENERALIZEDTIME *a);
 ASN1_GENERALIZEDTIME *ASN1_GENERALIZEDTIME_set(ASN1_GENERALIZEDTIME *s,time_t t);
 ASN1_GENERALIZEDTIME *ASN1_GENERALIZEDTIME_adj(ASN1_GENERALIZEDTIME *s,
 	     time_t t, int offset_day, long offset_sec);
 int ASN1_GENERALIZEDTIME_set_string(ASN1_GENERALIZEDTIME *s, const char *str);
-int ASN1_TIME_diff(int *pday, int *psec,
-			const ASN1_TIME *from, const ASN1_TIME *to);

 DECLARE_ASN1_FUNCTIONS(ASN1_OCTET_STRING)
 ASN1_OCTET_STRING *	ASN1_OCTET_STRING_dup(const ASN1_OCTET_STRING *a);
@@ -1195,7 +1194,6 @@ void ERR_load_ASN1_strings(void);
 #define ASN1_F_ASN1_ITEM_I2D_FP				 193
 #define ASN1_F_ASN1_ITEM_PACK				 198
 #define ASN1_F_ASN1_ITEM_SIGN				 195
-#define ASN1_F_ASN1_ITEM_SIGN_CTX			 220
 #define ASN1_F_ASN1_ITEM_UNPACK				 199
 #define ASN1_F_ASN1_ITEM_VERIFY				 197
 #define ASN1_F_ASN1_MBSTRING_NCOPY			 122
@@ -1268,7 +1266,6 @@ void ERR_load_ASN1_strings(void);
 #define ASN1_F_PKCS5_PBE2_SET_IV			 167
 #define ASN1_F_PKCS5_PBE_SET				 202
 #define ASN1_F_PKCS5_PBE_SET0_ALGOR			 215
-#define ASN1_F_PKCS5_PBKDF2_SET				 219
 #define ASN1_F_SMIME_READ_ASN1				 212
 #define ASN1_F_SMIME_TEXT				 213
 #define ASN1_F_X509_CINF_NEW				 168
@@ -1294,7 +1291,6 @@ void ERR_load_ASN1_strings(void);
 #define ASN1_R_BOOLEAN_IS_WRONG_LENGTH			 106
 #define ASN1_R_BUFFER_TOO_SMALL				 107
 #define ASN1_R_CIPHER_HAS_NO_OBJECT_IDENTIFIER		 108
-#define ASN1_R_CONTEXT_NOT_INITIALISED			 217
 #define ASN1_R_DATA_IS_WRONG				 109
 #define ASN1_R_DECODE_ERROR				 110
 #define ASN1_R_DECODING_ERROR				 111
--- a/crypto/asn1/asn1_err.c
+++ b/crypto/asn1/asn1_err.c
@@ -1,6 +1,6 @@
 /* crypto/asn1/asn1_err.c */
 /* ====================================================================
- * Copyright (c) 1999-2011 The OpenSSL Project.  All rights reserved.
+ * Copyright (c) 1999-2009 The OpenSSL Project.  All rights reserved.
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions
@@ -107,7 +107,6 @@ static ERR_STRING_DATA ASN1_str_functs[]=
 {ERR_FUNC(ASN1_F_ASN1_ITEM_I2D_FP),	"ASN1_item_i2d_fp"},
 {ERR_FUNC(ASN1_F_ASN1_ITEM_PACK),	"ASN1_item_pack"},
 {ERR_FUNC(ASN1_F_ASN1_ITEM_SIGN),	"ASN1_item_sign"},
-{ERR_FUNC(ASN1_F_ASN1_ITEM_SIGN_CTX),	"ASN1_item_sign_ctx"},
 {ERR_FUNC(ASN1_F_ASN1_ITEM_UNPACK),	"ASN1_item_unpack"},
 {ERR_FUNC(ASN1_F_ASN1_ITEM_VERIFY),	"ASN1_item_verify"},
 {ERR_FUNC(ASN1_F_ASN1_MBSTRING_NCOPY),	"ASN1_mbstring_ncopy"},
@@ -180,7 +179,6 @@ static ERR_STRING_DATA ASN1_str_functs[]=
 {ERR_FUNC(ASN1_F_PKCS5_PBE2_SET_IV),	"PKCS5_pbe2_set_iv"},
 {ERR_FUNC(ASN1_F_PKCS5_PBE_SET),	"PKCS5_pbe_set"},
 {ERR_FUNC(ASN1_F_PKCS5_PBE_SET0_ALGOR),	"PKCS5_pbe_set0_algor"},
-{ERR_FUNC(ASN1_F_PKCS5_PBKDF2_SET),	"PKCS5_pbkdf2_set"},
 {ERR_FUNC(ASN1_F_SMIME_READ_ASN1),	"SMIME_read_ASN1"},
 {ERR_FUNC(ASN1_F_SMIME_TEXT),	"SMIME_text"},
 {ERR_FUNC(ASN1_F_X509_CINF_NEW),	"X509_CINF_NEW"},
@@ -209,7 +207,6 @@ static ERR_STRING_DATA ASN1_str_reasons[]=
 {ERR_REASON(ASN1_R_BOOLEAN_IS_WRONG_LENGTH),"boolean is wrong length"},
 {ERR_REASON(ASN1_R_BUFFER_TOO_SMALL)     ,"buffer too small"},
 {ERR_REASON(ASN1_R_CIPHER_HAS_NO_OBJECT_IDENTIFIER),"cipher has no object identifier"},
-{ERR_REASON(ASN1_R_CONTEXT_NOT_INITIALISED),"context not initialised"},
 {ERR_REASON(ASN1_R_DATA_IS_WRONG)        ,"data is wrong"},
 {ERR_REASON(ASN1_R_DECODE_ERROR)         ,"decode error"},
 {ERR_REASON(ASN1_R_DECODING_ERROR)       ,"decoding error"},
--- a/crypto/asn1/asn1_locl.h
+++ b/crypto/asn1/asn1_locl.h
@@ -58,9 +58,6 @@

 /* Internal ASN1 structures and functions: not for application use */

-int asn1_utctime_to_tm(struct tm *tm, const ASN1_UTCTIME *d);
-int asn1_generalizedtime_to_tm(struct tm *tm, const ASN1_GENERALIZEDTIME *d);
-
 /* ASN1 print context structure */

 struct asn1_pctx_st
@@ -105,10 +102,6 @@ struct evp_pkey_asn1_method_st
 	int (*param_cmp)(const EVP_PKEY *a, const EVP_PKEY *b);
 	int (*param_print)(BIO *out, const EVP_PKEY *pkey, int indent,
 							ASN1_PCTX *pctx);
-	int (*sig_print)(BIO *out,
-			 const X509_ALGOR *sigalg, const ASN1_STRING *sig,
-					 int indent, ASN1_PCTX *pctx);
-

 	void (*pkey_free)(EVP_PKEY *pkey);
 	int (*pkey_ctrl)(EVP_PKEY *pkey, int op, long arg1, void *arg2);
@@ -118,13 +111,6 @@ struct evp_pkey_asn1_method_st
 	int (*old_priv_decode)(EVP_PKEY *pkey,
 				const unsigned char **pder, int derlen);
 	int (*old_priv_encode)(const EVP_PKEY *pkey, unsigned char **pder);
-	/* Custom ASN1 signature verification */
-	int (*item_verify)(EVP_MD_CTX *ctx, const ASN1_ITEM *it, void *asn,
-				X509_ALGOR *a, ASN1_BIT_STRING *sig,
-				EVP_PKEY *pkey);
-	int (*item_sign)(EVP_MD_CTX *ctx, const ASN1_ITEM *it, void *asn,
-				X509_ALGOR *alg1, X509_ALGOR *alg2, 
-				ASN1_BIT_STRING *sig);

 	} /* EVP_PKEY_ASN1_METHOD */;

--- a/crypto/asn1/n_pkey.c
+++ b/crypto/asn1/n_pkey.c
@@ -129,7 +129,6 @@ int i2d_RSA_NET(const RSA *a, unsigned char **pp,
 	unsigned char buf[256],*zz;
 	unsigned char key[EVP_MAX_KEY_LENGTH];
 	EVP_CIPHER_CTX ctx;
-	EVP_CIPHER_CTX_init(&ctx);

 	if (a == NULL) return(0);

@@ -207,28 +206,24 @@ int i2d_RSA_NET(const RSA *a, unsigned char **pp,
 	i = strlen((char *)buf);
 	/* If the key is used for SGC the algorithm is modified a little. */
 	if(sgckey) {
-		if (!EVP_Digest(buf, i, buf, NULL, EVP_md5(), NULL))
-			goto err;
+		EVP_Digest(buf, i, buf, NULL, EVP_md5(), NULL);
 		memcpy(buf + 16, "SGCKEYSALT", 10);
 		i = 26;
 	}

-	if (!EVP_BytesToKey(EVP_rc4(),EVP_md5(),NULL,buf,i,1,key,NULL))
-		goto err;
+	EVP_BytesToKey(EVP_rc4(),EVP_md5(),NULL,buf,i,1,key,NULL);
 	OPENSSL_cleanse(buf,256);

 	/* Encrypt private key in place */
 	zz = enckey->enckey->digest->data;
-	if (!EVP_EncryptInit_ex(&ctx,EVP_rc4(),NULL,key,NULL))
-		goto err;
-	if (!EVP_EncryptUpdate(&ctx,zz,&i,zz,pkeylen))
-		goto err;
-	if (!EVP_EncryptFinal_ex(&ctx,zz + i,&j))
-		goto err;
+	EVP_CIPHER_CTX_init(&ctx);
+	EVP_EncryptInit_ex(&ctx,EVP_rc4(),NULL,key,NULL);
+	EVP_EncryptUpdate(&ctx,zz,&i,zz,pkeylen);
+	EVP_EncryptFinal_ex(&ctx,zz + i,&j);
+	EVP_CIPHER_CTX_cleanup(&ctx);

 	ret = i2d_NETSCAPE_ENCRYPTED_PKEY(enckey, pp);
 err:
-	EVP_CIPHER_CTX_cleanup(&ctx);
 	NETSCAPE_ENCRYPTED_PKEY_free(enckey);
 	NETSCAPE_PKEY_free(pkey);
 	return(ret);
@@ -293,7 +288,6 @@ static RSA *d2i_RSA_NET_2(RSA **a, ASN1_OCTET_STRING *os,
 	const unsigned char *zz;
 	unsigned char key[EVP_MAX_KEY_LENGTH];
 	EVP_CIPHER_CTX ctx;
-	EVP_CIPHER_CTX_init(&ctx);

 	i=cb((char *)buf,256,"Enter Private Key password:",0);
 	if (i != 0)
@@ -304,22 +298,19 @@ static RSA *d2i_RSA_NET_2(RSA **a, ASN1_OCTET_STRING *os,

 	i = strlen((char *)buf);
 	if(sgckey){
-		if (!EVP_Digest(buf, i, buf, NULL, EVP_md5(), NULL))
-			goto err;
+		EVP_Digest(buf, i, buf, NULL, EVP_md5(), NULL);
 		memcpy(buf + 16, "SGCKEYSALT", 10);
 		i = 26;
 	}
 		
-	if (!EVP_BytesToKey(EVP_rc4(),EVP_md5(),NULL,buf,i,1,key,NULL))
-		goto err;
+	EVP_BytesToKey(EVP_rc4(),EVP_md5(),NULL,buf,i,1,key,NULL);
 	OPENSSL_cleanse(buf,256);

-	if (!EVP_DecryptInit_ex(&ctx,EVP_rc4(),NULL, key,NULL))
-		goto err;
-	if (!EVP_DecryptUpdate(&ctx,os->data,&i,os->data,os->length))
-		goto err;
-	if (!EVP_DecryptFinal_ex(&ctx,&(os->data[i]),&j))
-		goto err;
+	EVP_CIPHER_CTX_init(&ctx);
+	EVP_DecryptInit_ex(&ctx,EVP_rc4(),NULL, key,NULL);
+	EVP_DecryptUpdate(&ctx,os->data,&i,os->data,os->length);
+	EVP_DecryptFinal_ex(&ctx,&(os->data[i]),&j);
+	EVP_CIPHER_CTX_cleanup(&ctx);
 	os->length=i+j;

 	zz=os->data;
@@ -337,7 +328,6 @@ static RSA *d2i_RSA_NET_2(RSA **a, ASN1_OCTET_STRING *os,
 		goto err;
 		}
 err:
-	EVP_CIPHER_CTX_cleanup(&ctx);
 	NETSCAPE_PKEY_free(pkey);
 	return(ret);
 	}
--- a/crypto/asn1/p5_pbev2.c
+++ b/crypto/asn1/p5_pbev2.c
@@ -91,10 +91,12 @@ X509_ALGOR *PKCS5_pbe2_set_iv(const EVP_CIPHER *cipher, int iter,
 				 unsigned char *aiv, int prf_nid)
 {
 	X509_ALGOR *scheme = NULL, *kalg = NULL, *ret = NULL;
-	int alg_nid, keylen;
+	int alg_nid;
 	EVP_CIPHER_CTX ctx;
 	unsigned char iv[EVP_MAX_IV_LENGTH];
+	PBKDF2PARAM *kdf = NULL;
 	PBE2PARAM *pbe2 = NULL;
+	ASN1_OCTET_STRING *osalt = NULL;
 	ASN1_OBJECT *obj;

 	alg_nid = EVP_CIPHER_type(cipher);
@@ -125,8 +127,7 @@ X509_ALGOR *PKCS5_pbe2_set_iv(const EVP_CIPHER *cipher, int iter,
 	EVP_CIPHER_CTX_init(&ctx);

 	/* Dummy cipherinit to just setup the IV, and PRF */
-	if (!EVP_CipherInit_ex(&ctx, cipher, NULL, NULL, iv, 0))
-		goto err;
+	EVP_CipherInit_ex(&ctx, cipher, NULL, NULL, iv, 0);
 	if(EVP_CIPHER_param_to_asn1(&ctx, scheme->parameter) < 0) {
 		ASN1err(ASN1_F_PKCS5_PBE2_SET_IV,
 					ASN1_R_ERROR_SETTING_CIPHER_PARAMS);
@@ -144,21 +145,55 @@ X509_ALGOR *PKCS5_pbe2_set_iv(const EVP_CIPHER *cipher, int iter,
 		}
 	EVP_CIPHER_CTX_cleanup(&ctx);

+	if(!(kdf = PBKDF2PARAM_new())) goto merr;
+	if(!(osalt = M_ASN1_OCTET_STRING_new())) goto merr;
+
+	if (!saltlen) saltlen = PKCS5_SALT_LEN;
+	if (!(osalt->data = OPENSSL_malloc (saltlen))) goto merr;
+	osalt->length = saltlen;
+	if (salt) memcpy (osalt->data, salt, saltlen);
+	else if (RAND_pseudo_bytes (osalt->data, saltlen) < 0) goto merr;
+
+	if(iter <= 0) iter = PKCS5_DEFAULT_ITER;
+	if(!ASN1_INTEGER_set(kdf->iter, iter)) goto merr;
+
+	/* Now include salt in kdf structure */
+	kdf->salt->value.octet_string = osalt;
+	kdf->salt->type = V_ASN1_OCTET_STRING;
+	osalt = NULL;
+
 	/* If its RC2 then we'd better setup the key length */

-	if(alg_nid == NID_rc2_cbc)
-		keylen = EVP_CIPHER_key_length(cipher);
-	else
-		keylen = -1;
+	if(alg_nid == NID_rc2_cbc) {
+		if(!(kdf->keylength = M_ASN1_INTEGER_new())) goto merr;
+		if(!ASN1_INTEGER_set (kdf->keylength,
+				 EVP_CIPHER_key_length(cipher))) goto merr;
+	}

-	/* Setup keyfunc */
+	/* prf can stay NULL if we are using hmacWithSHA1 */
+	if (prf_nid != NID_hmacWithSHA1)
+		{
+		kdf->prf = X509_ALGOR_new();
+		if (!kdf->prf)
+			goto merr;
+		X509_ALGOR_set0(kdf->prf, OBJ_nid2obj(prf_nid),
+					V_ASN1_NULL, NULL);
+		}

-	X509_ALGOR_free(pbe2->keyfunc);
+	/* Now setup the PBE2PARAM keyfunc structure */

-	pbe2->keyfunc = PKCS5_pbkdf2_set(iter, salt, saltlen, prf_nid, keylen);
+	pbe2->keyfunc->algorithm = OBJ_nid2obj(NID_id_pbkdf2);

-	if (!pbe2->keyfunc)
-		goto merr;
+	/* Encode PBKDF2PARAM into parameter of pbe2 */
+
+	if(!(pbe2->keyfunc->parameter = ASN1_TYPE_new())) goto merr;
+
+	if(!ASN1_item_pack(kdf, ASN1_ITEM_rptr(PBKDF2PARAM),
+			 &pbe2->keyfunc->parameter->value.sequence)) goto merr;
+	pbe2->keyfunc->parameter->type = V_ASN1_SEQUENCE;
+
+	PBKDF2PARAM_free(kdf);
+	kdf = NULL;

 	/* Now set up top level AlgorithmIdentifier */

@@ -184,6 +219,8 @@ X509_ALGOR *PKCS5_pbe2_set_iv(const EVP_CIPHER *cipher, int iter,
 	err:
 	PBE2PARAM_free(pbe2);
 	/* Note 'scheme' is freed as part of pbe2 */
+	M_ASN1_OCTET_STRING_free(osalt);
+	PBKDF2PARAM_free(kdf);
 	X509_ALGOR_free(kalg);
 	X509_ALGOR_free(ret);

@@ -196,85 +233,3 @@ X509_ALGOR *PKCS5_pbe2_set(const EVP_CIPHER *cipher, int iter,
 	{
 	return PKCS5_pbe2_set_iv(cipher, iter, salt, saltlen, NULL, -1);
 	}
-
-X509_ALGOR *PKCS5_pbkdf2_set(int iter, unsigned char *salt, int saltlen,
-				int prf_nid, int keylen)
-	{
-	X509_ALGOR *keyfunc = NULL;
-	PBKDF2PARAM *kdf = NULL;
-	ASN1_OCTET_STRING *osalt = NULL;
-
-	if(!(kdf = PBKDF2PARAM_new()))
-		goto merr;
-	if(!(osalt = M_ASN1_OCTET_STRING_new()))
-		goto merr;
-
-	kdf->salt->value.octet_string = osalt;
-	kdf->salt->type = V_ASN1_OCTET_STRING;
-
-	if (!saltlen)
-		saltlen = PKCS5_SALT_LEN;
-	if (!(osalt->data = OPENSSL_malloc (saltlen)))
-		goto merr;
-
-	osalt->length = saltlen;
-
-	if (salt)
-		memcpy (osalt->data, salt, saltlen);
-	else if (RAND_pseudo_bytes (osalt->data, saltlen) < 0)
-		goto merr;
-
-	if(iter <= 0)
-		iter = PKCS5_DEFAULT_ITER;
-
-	if(!ASN1_INTEGER_set(kdf->iter, iter))
-		goto merr;
-
-	/* If have a key len set it up */
-
-	if(keylen > 0) 
-		{
-		if(!(kdf->keylength = M_ASN1_INTEGER_new()))
-			goto merr;
-		if(!ASN1_INTEGER_set (kdf->keylength, keylen))
-			goto merr;
-		}
-
-	/* prf can stay NULL if we are using hmacWithSHA1 */
-	if (prf_nid > 0 && prf_nid != NID_hmacWithSHA1)
-		{
-		kdf->prf = X509_ALGOR_new();
-		if (!kdf->prf)
-			goto merr;
-		X509_ALGOR_set0(kdf->prf, OBJ_nid2obj(prf_nid),
-					V_ASN1_NULL, NULL);
-		}
-
-	/* Finally setup the keyfunc structure */
-
-	keyfunc = X509_ALGOR_new();
-	if (!keyfunc)
-		goto merr;
-
-	keyfunc->algorithm = OBJ_nid2obj(NID_id_pbkdf2);
-
-	/* Encode PBKDF2PARAM into parameter of pbe2 */
-
-	if(!(keyfunc->parameter = ASN1_TYPE_new()))
-		goto merr;
-
-	if(!ASN1_item_pack(kdf, ASN1_ITEM_rptr(PBKDF2PARAM),
-			 &keyfunc->parameter->value.sequence))
-		goto merr;
-	keyfunc->parameter->type = V_ASN1_SEQUENCE;
-
-	PBKDF2PARAM_free(kdf);
-	return keyfunc;
-
-	merr:
-	ASN1err(ASN1_F_PKCS5_PBKDF2_SET,ERR_R_MALLOC_FAILURE);
-	PBKDF2PARAM_free(kdf);
-	X509_ALGOR_free(keyfunc);
-	return NULL;
-	}
-
--- a/crypto/asn1/t_crl.c
+++ b/crypto/asn1/t_crl.c
@@ -94,7 +94,8 @@ int X509_CRL_print(BIO *out, X509_CRL *x)
 	l = X509_CRL_get_version(x);
 	BIO_printf(out, "%8sVersion %lu (0x%lx)\n", "", l+1, l);
 	i = OBJ_obj2nid(x->sig_alg->algorithm);
-	X509_signature_print(out, x->sig_alg, NULL);
+	BIO_printf(out, "%8sSignature Algorithm: %s\n", "",
+				 (i == NID_undef) ? "NONE" : OBJ_nid2ln(i));
 	p=X509_NAME_oneline(X509_CRL_get_issuer(x),NULL,0);
 	BIO_printf(out,"%8sIssuer: %s\n","",p);
 	OPENSSL_free(p);
--- a/crypto/asn1/t_x509.c
+++ b/crypto/asn1/t_x509.c
@@ -72,7 +72,6 @@
 #include <openssl/objects.h>
 #include <openssl/x509.h>
 #include <openssl/x509v3.h>
-#include "asn1_locl.h"

 #ifndef OPENSSL_NO_FP_API
 int X509_print_fp(FILE *fp, X509 *x)
@@ -138,7 +137,7 @@ int X509_print_ex(BIO *bp, X509 *x, unsigned long nmflags, unsigned long cflag)
 		if (BIO_write(bp,"        Serial Number:",22) <= 0) goto err;

 		bs=X509_get_serialNumber(x);
-		if (bs->length <= (int)sizeof(long))
+		if (bs->length <= 4)
 			{
 			l=ASN1_INTEGER_get(bs);
 			if (bs->type == V_ASN1_NEG_INTEGER)
@@ -168,16 +167,12 @@ int X509_print_ex(BIO *bp, X509 *x, unsigned long nmflags, unsigned long cflag)

 	if(!(cflag & X509_FLAG_NO_SIGNAME))
 		{
-		if(X509_signature_print(bp, x->sig_alg, NULL) <= 0)
-			goto err;
-#if 0
 		if (BIO_printf(bp,"%8sSignature Algorithm: ","") <= 0) 
 			goto err;
 		if (i2a_ASN1_OBJECT(bp, ci->signature->algorithm) <= 0)
 			goto err;
 		if (BIO_puts(bp, "\n") <= 0)
 			goto err;
-#endif
 		}

 	if(!(cflag & X509_FLAG_NO_ISSUER))
@@ -225,24 +220,6 @@ int X509_print_ex(BIO *bp, X509 *x, unsigned long nmflags, unsigned long cflag)
 			}
 		}

-	if(!(cflag & X509_FLAG_NO_IDS))
-		{
-		if (ci->issuerUID)
-			{
-			if (BIO_printf(bp,"%8sIssuer Unique ID: ","") <= 0) 
-				goto err;
-			if (!X509_signature_dump(bp, ci->issuerUID, 12))
-				goto err;
-			}
-		if (ci->subjectUID)
-			{
-			if (BIO_printf(bp,"%8sSubject Unique ID: ","") <= 0) 
-				goto err;
-			if (!X509_signature_dump(bp, ci->subjectUID, 12))
-				goto err;
-			}
-		}
-
 	if (!(cflag & X509_FLAG_NO_EXTENSIONS))
 		X509V3_extensions_print(bp, "X509v3 extensions",
 					ci->extensions, cflag, 8);
@@ -278,8 +255,7 @@ int X509_ocspid_print (BIO *bp, X509 *x)
 		goto err;
 	i2d_X509_NAME(x->cert_info->subject, &dertmp);

-	if (!EVP_Digest(der, derlen, SHA1md, NULL, EVP_sha1(), NULL))
-		goto err;
+	EVP_Digest(der, derlen, SHA1md, NULL, EVP_sha1(), NULL);
 	for (i=0; i < SHA_DIGEST_LENGTH; i++)
 		{
 		if (BIO_printf(bp,"%02X",SHA1md[i]) <= 0) goto err;
@@ -292,10 +268,8 @@ int X509_ocspid_print (BIO *bp, X509 *x)
 	if (BIO_printf(bp,"\n        Public key OCSP hash: ") <= 0)
 		goto err;

-	if (!EVP_Digest(x->cert_info->key->public_key->data,
-			x->cert_info->key->public_key->length,
-			SHA1md, NULL, EVP_sha1(), NULL))
-		goto err;
+	EVP_Digest(x->cert_info->key->public_key->data,
+		x->cert_info->key->public_key->length, SHA1md, NULL, EVP_sha1(), NULL);
 	for (i=0; i < SHA_DIGEST_LENGTH; i++)
 		{
 		if (BIO_printf(bp,"%02X",SHA1md[i]) <= 0)
@@ -309,50 +283,23 @@ err:
 	return(0);
 	}

-int X509_signature_dump(BIO *bp, const ASN1_STRING *sig, int indent)
+int X509_signature_print(BIO *bp, X509_ALGOR *sigalg, ASN1_STRING *sig)
 {
-	const unsigned char *s;
+	unsigned char *s;
 	int i, n;
+	if (BIO_puts(bp,"    Signature Algorithm: ") <= 0) return 0;
+	if (i2a_ASN1_OBJECT(bp, sigalg->algorithm) <= 0) return 0;

 	n=sig->length;
 	s=sig->data;
 	for (i=0; i<n; i++)
 		{
 		if ((i%18) == 0)
-			{
-			if (BIO_write(bp,"\n",1) <= 0) return 0;
-			if (BIO_indent(bp, indent, indent) <= 0) return 0;
-			}
+			if (BIO_write(bp,"\n        ",9) <= 0) return 0;
 			if (BIO_printf(bp,"%02x%s",s[i],
 				((i+1) == n)?"":":") <= 0) return 0;
 		}
 	if (BIO_write(bp,"\n",1) != 1) return 0;
-
-	return 1;
-}
-
-int X509_signature_print(BIO *bp, X509_ALGOR *sigalg, ASN1_STRING *sig)
-{
-	int sig_nid;
-	if (BIO_puts(bp,"    Signature Algorithm: ") <= 0) return 0;
-	if (i2a_ASN1_OBJECT(bp, sigalg->algorithm) <= 0) return 0;
-
-	sig_nid = OBJ_obj2nid(sigalg->algorithm);
-	if (sig_nid != NID_undef)
-		{
-		int pkey_nid, dig_nid;
-		const EVP_PKEY_ASN1_METHOD *ameth;
-		if (OBJ_find_sigid_algs(sig_nid, &dig_nid, &pkey_nid))
-			{
-			ameth = EVP_PKEY_asn1_find(NULL, pkey_nid);
-			if (ameth && ameth->sig_print)
-				return ameth->sig_print(bp, sigalg, sig, 9, 0);
-			}
-		}
-	if (sig)
-		return X509_signature_dump(bp, sig, 9);
-	else if (BIO_puts(bp, "\n") <= 0)
-		return 0;
 	return 1;
 }

--- a/crypto/asn1/x_algor.c
+++ b/crypto/asn1/x_algor.c
@@ -128,17 +128,3 @@ void X509_ALGOR_get0(ASN1_OBJECT **paobj, int *pptype, void **ppval,
 		}
 	}

-/* Set up an X509_ALGOR DigestAlgorithmIdentifier from an EVP_MD */
-
-void X509_ALGOR_set_md(X509_ALGOR *alg, const EVP_MD *md)
-	{
-	int param_type;
-
-	if (md->flags & EVP_MD_FLAG_DIGALGID_ABSENT)
-		param_type = V_ASN1_UNDEF;
-	else
-		param_type = V_ASN1_NULL;
-
-	X509_ALGOR_set0(alg, OBJ_nid2obj(EVP_MD_type(md)), param_type, NULL);
-
-	}
--- a/Show More
+++ b/Show More