Avoid use of "echo -n" some platforms don't support it.

standalone utilities.

.cvsignore

@@ -1,6 +1,5 @@
 openssl.pc
-libcrypto.pc
-libssl.pc
+Makefile
 MINFO
 makefile.one
 tmp
@@ -13,10 +12,10 @@ maketest.log
 cctest
 cctest.c
 cctest.a
+libcrypto.so.*
+libfips.so.*
+libssl.so.*
+libcrypto.sha1
+libcrypto.a.sha1
 *.flc
 semantic.cache
-Makefile
-*.dll*
-*.so*
-*.sl*
-*.dylib*

ACKNOWLEDGMENTS

@@ -1,25 +0,0 @@
-The OpenSSL project depends on volunteer efforts and financial support from
-the end user community. That support comes in the form of donations and paid
-sponsorships, software support contracts, paid consulting services
-and commissioned software development.
-
-Since all these activities support the continued development and improvement
-of OpenSSL we consider all these clients and customers as sponsors of the
-OpenSSL project.
-
-We would like to identify and thank the following such sponsors for their past
-or current significant support of the OpenSSL project:
-
-Very significant support:
-
-	OpenGear: www.opengear.com
-
-Significant support:
-
-	PSW Group: www.psw.net
-
-Please note that we ask permission to identify sponsors and that some sponsors
-we consider eligible for inclusion here have requested to remain anonymous.
-
-Additional sponsorship or financial support is always welcome: for more
-information please contact the OpenSSL Software Foundation.

CHANGES.SSLeay

@@ -148,7 +148,7 @@ eric (about to go bushwalking for the 4 day easter break :-)
       This would tend to cause memory overwrites since SSLv3 has
       a maximum packet size of 16k.  If your program uses
       buffers <= 16k, you would probably never see this problem.
-    - Fixed a few errors that were cause by malloc() not returning
+    - Fixed a new errors that were cause by malloc() not returning
       0 initialised memory..
     - SSL_OP_NETSCAPE_CA_DN_BUG was being switched on when using
       SSL_CTX_set_options(ssl_ctx,SSL_OP_ALL); which was a bad thing

FAQ

@@ -31,9 +31,6 @@ OpenSSL  -  Frequently Asked Questions
 * Why does my browser give a warning about a mismatched hostname?
 * How do I install a CA certificate into a browser?
 * Why is OpenSSL x509 DN output not conformant to RFC2253?
-* What is a "128 bit certificate"? Can I create one with OpenSSL?
-* Why does OpenSSL set the authority key identifier extension incorrectly?
-* How can I set up a bundle of commercial root CA certificates?
 
 [BUILD] Questions about building and testing OpenSSL
 
@@ -49,12 +46,6 @@ OpenSSL  -  Frequently Asked Questions
 * Why does the OpenSSL test suite fail on MacOS X?
 * Why does the OpenSSL test suite fail in BN_sqr test [on a 64-bit platform]?
 * Why does OpenBSD-i386 build fail on des-586.s with "Unimplemented segment type"?
-* Why does the OpenSSL test suite fail in sha512t on x86 CPU?
-* Why does compiler fail to compile sha512.c?
-* Test suite still fails, what to do?
-* I think I've found a bug, what should I do?
-* I'm SURE I've found a bug, how do I report it?
-* I've found a security issue, how do I report it?
 
 [PROG] Questions about programming with OpenSSL
 
@@ -71,9 +62,6 @@ OpenSSL  -  Frequently Asked Questions
 * Why doesn't my server application receive a client certificate?
 * Why does compilation fail due to an undefined symbol NID_uniqueIdentifier?
 * I think I've detected a memory leak, is this a bug?
-* Why does Valgrind complain about the use of uninitialized data?
-* Why doesn't a memory BIO work when a file does?
-* Where are the declarations and implementations of d2i_X509() etc?
 
 ===============================================================================
 
@@ -82,7 +70,7 @@ OpenSSL  -  Frequently Asked Questions
 * Which is the current version of OpenSSL?
 
 The current version is available from <URL: http://www.openssl.org>.
-OpenSSL 1.0.0d was released on Feb 8th, 2011.
+OpenSSL 0.9.7l was released on September 28, 2006.
 
 In addition to the current stable release, you can also access daily
 snapshots of the OpenSSL development version at <URL:
@@ -98,17 +86,14 @@ explains how to install this library.
 
 OpenSSL includes a command line utility that can be used to perform a
 variety of cryptographic functions.  It is described in the openssl(1)
-manpage.  Documentation for developers is currently being written. Many
-manual pages are available; overviews over libcrypto and
+manpage.  Documentation for developers is currently being written.  A
+few manual pages already are available; overviews over libcrypto and
 libssl are given in the crypto(3) and ssl(3) manpages.
 
 The OpenSSL manpages are installed in /usr/local/ssl/man/ (or a
 different directory if you specified one as described in INSTALL).
 In addition, you can read the most current versions at
-<URL: http://www.openssl.org/docs/>. Note that the online documents refer
-to the very latest development versions of OpenSSL and may include features
-not present in released versions. If in doubt refer to the documentation
-that came with the version of OpenSSL you are using.
+<URL: http://www.openssl.org/docs/>.
 
 For information on parts of libcrypto that are not yet documented, you
 might want to read Ariel Glenn's documentation on SSLeay 0.9, OpenSSL's
@@ -134,7 +119,7 @@ OpenSSL.  Information on the OpenSSL mailing lists is available from
 * Where can I get a compiled version of OpenSSL?
 
 You can finder pointers to binary distributions in
-<URL: http://www.openssl.org/related/binaries.html> .
+http://www.openssl.org/related/binaries.html .
 
 Some applications that use OpenSSL are distributed in binary form.
 When using such an application, you don't need to install OpenSSL
@@ -167,8 +152,7 @@ Use MD5 to check that a tarball from a mirror site is identical:
    md5sum TARBALL | awk '{print $1;}' | cmp - TARBALL.md5
 
 You can check authenticity using pgp or gpg. You need the OpenSSL team
-member public key used to sign it (download it from a key server, see a
-list of keys at <URL: http://www.openssl.org/about/>). Then
+member public key used to sign it (download it from a key server). Then
 just do:
 
    pgp TARBALL.asc
@@ -182,8 +166,8 @@ you if you want to use OpenSSL.  For information on intellectual
 property rights, please consult a lawyer.  The OpenSSL team does not
 offer legal advice.
 
-You can configure OpenSSL so as not to use IDEA, MDC2 and RC5 by using
- ./config no-idea no-mdc2 no-rc5
+You can configure OpenSSL so as not to use RC5 and IDEA by using
+ ./config no-rc5 no-idea
 
 
 * Can I use OpenSSL with GPL software?
@@ -399,76 +383,6 @@ interface, the "-nameopt" option could be introduded. See the manual
 page of the "openssl x509" commandline tool for details. The old behaviour
 has however been left as default for the sake of compatibility.
 
-* What is a "128 bit certificate"? Can I create one with OpenSSL?
-
-The term "128 bit certificate" is a highly misleading marketing term. It does
-*not* refer to the size of the public key in the certificate! A certificate
-containing a 128 bit RSA key would have negligible security.
-
-There were various other names such as "magic certificates", "SGC
-certificates", "step up certificates" etc.
-
-You can't generally create such a certificate using OpenSSL but there is no
-need to any more. Nowadays web browsers using unrestricted strong encryption
-are generally available.
-
-When there were tight restrictions on the export of strong encryption
-software from the US only weak encryption algorithms could be freely exported
-(initially 40 bit and then 56 bit). It was widely recognised that this was
-inadequate. A relaxation of the rules allowed the use of strong encryption but
-only to an authorised server.
-
-Two slighly different techniques were developed to support this, one used by
-Netscape was called "step up", the other used by MSIE was called "Server Gated
-Cryptography" (SGC). When a browser initially connected to a server it would
-check to see if the certificate contained certain extensions and was issued by
-an authorised authority. If these test succeeded it would reconnect using
-strong encryption.
-
-Only certain (initially one) certificate authorities could issue the
-certificates and they generally cost more than ordinary certificates.
-
-Although OpenSSL can create certificates containing the appropriate extensions
-the certificate would not come from a permitted authority and so would not
-be recognized.
-
-The export laws were later changed to allow almost unrestricted use of strong
-encryption so these certificates are now obsolete.
-
-
-* Why does OpenSSL set the authority key identifier (AKID) extension incorrectly?
-
-It doesn't: this extension is often the cause of confusion.
-
-Consider a certificate chain A->B->C so that A signs B and B signs C. Suppose
-certificate C contains AKID.
-
-The purpose of this extension is to identify the authority certificate B. This
-can be done either by including the subject key identifier of B or its issuer
-name and serial number.
-
-In this latter case because it is identifying certifcate B it must contain the
-issuer name and serial number of B.
-
-It is often wrongly assumed that it should contain the subject name of B. If it
-did this would be redundant information because it would duplicate the issuer
-name of C.
-
-
-* How can I set up a bundle of commercial root CA certificates?
-
-The OpenSSL software is shipped without any root CA certificate as the
-OpenSSL project does not have any policy on including or excluding
-any specific CA and does not intend to set up such a policy. Deciding
-about which CAs to support is up to application developers or
-administrators.
-
-Other projects do have other policies so you can for example extract the CA
-bundle used by Mozilla and/or modssl as described in this article:
-
-  <URL: http://www.mail-archive.com/modssl-users@modssl.org/msg16980.html>
-
-
 [BUILD] =======================================================================
 
 * Why does the linker complain about undefined symbols?
@@ -508,7 +422,7 @@ when you run the test suite (using "make test").  The message returned is
 "bc: 1 not implemented".
 
 The best way to deal with this is to find another implementation of bc
-and compile/install it.  GNU bc (see <URL: http://www.gnu.org/software/software.html>
+and compile/install it.  GNU bc (see http://www.gnu.org/software/software.html
 for download instructions) can be safely used, for example.
 
 
@@ -519,7 +433,7 @@ that the OpenSSL bntest throws at it.  This gets triggered when you run the
 test suite (using "make test").  The message returned is "bc: stack empty".
 
 The best way to deal with this is to find another implementation of bc
-and compile/install it.  GNU bc (see <URL: http://www.gnu.org/software/software.html>
+and compile/install it.  GNU bc (see http://www.gnu.org/software/software.html
 for download instructions) can be safely used, for example.
 
 
@@ -548,7 +462,7 @@ get the best result from OpenSSL.  A bit more complicated solution is the
 following:
 
 ----- snip:start -----
-  make DIRS=crypto SDIRS=sha "`grep '^CFLAG=' Makefile.ssl | \
+  make DIRS=crypto SDIRS=sha "`grep '^CFLAG=' Makefile | \
        sed -e 's/ -O[0-9] / -O0 /'`"
   rm `ls crypto/*.o crypto/sha/*.o | grep -v 'sha_dgst\.o'`
   make
@@ -683,75 +597,6 @@ Reportedly elder *BSD a.out platforms also suffer from this problem and
 remedy should be same. Provided binary is statically linked and should be
 working across wider range of *BSD branches, not just OpenBSD.
 
-* Why does the OpenSSL test suite fail in sha512t on x86 CPU?
-
-If the test program in question fails withs SIGILL, Illegal Instruction
-exception, then you more than likely to run SSE2-capable CPU, such as
-Intel P4, under control of kernel which does not support SSE2
-instruction extentions. See accompanying INSTALL file and
-OPENSSL_ia32cap(3) documentation page for further information.
-
-* Why does compiler fail to compile sha512.c?
-
-OpenSSL SHA-512 implementation depends on compiler support for 64-bit
-integer type. Few elder compilers [ULTRIX cc, SCO compiler to mention a
-couple] lack support for this and therefore are incapable of compiling
-the module in question. The recommendation is to disable SHA-512 by
-adding no-sha512 to ./config [or ./Configure] command line. Another
-possible alternative might be to switch to GCC.
-
-* Test suite still fails, what to do?
-
-Another common reason for failure to complete some particular test is
-simply bad code generated by a buggy component in toolchain or deficiency
-in run-time environment. There are few cases documented in PROBLEMS file,
-consult it for possible workaround before you beat the drum. Even if you
-don't find solution or even mention there, do reserve for possibility of
-a compiler bug. Compiler bugs might appear in rather bizarre ways, they
-never make sense, and tend to emerge when you least expect them. In order
-to identify one, drop optimization level, e.g. by editing CFLAG line in
-top-level Makefile, recompile and re-run the test.
-
-* I think I've found a bug, what should I do?
-
-If you are a new user then it is quite likely you haven't found a bug and
-something is happening you aren't familiar with. Check this FAQ, the associated
-documentation and the mailing lists for similar queries. If you are still
-unsure whether it is a bug or not submit a query to the openssl-users mailing
-list.
-
-
-* I'm SURE I've found a bug, how do I report it?
-
-Bug reports with no security implications should be sent to the request
-tracker. This can be done by mailing the report to <rt@openssl.org> (or its
-alias <openssl-bugs@openssl.org>), please note that messages sent to the
-request tracker also appear in the public openssl-dev mailing list.
-
-The report should be in plain text. Any patches should be sent as
-plain text attachments because some mailers corrupt patches sent inline.
-If your issue affects multiple versions of OpenSSL check any patches apply
-cleanly and, if possible include patches to each affected version.
-
-The report should be given a meaningful subject line briefly summarising the
-issue. Just "bug in OpenSSL" or "bug in OpenSSL 0.9.8n" is not very helpful.
-
-By sending reports to the request tracker the bug can then be given a priority
-and assigned to the appropriate maintainer. The history of discussions can be
-accessed and if the issue has been addressed or a reason why not. If patches
-are only sent to openssl-dev they can be mislaid if a team member has to
-wade through months of old messages to review the discussion.
-
-See also <URL: http://www.openssl.org/support/rt.html>
-
-
-* I've found a security issue, how do I report it?
-
-If you think your bug has security implications then please send it to
-openssl-security@openssl.org if you don't get a prompt reply at least 
-acknowledging receipt then resend or mail it directly to one of the
-more active team members (e.g. Steve).
-
 [PROG] ========================================================================
 
 * Is OpenSSL thread-safe?
@@ -764,10 +609,8 @@ file.
 
 Multi-threaded applications must provide two callback functions to
 OpenSSL by calling CRYPTO_set_locking_callback() and
-CRYPTO_set_id_callback(), for all versions of OpenSSL up to and
-including 0.9.8[abc...]. As of version 1.0.0, CRYPTO_set_id_callback()
-and associated APIs are deprecated by CRYPTO_THREADID_set_callback()
-and friends. This is described in the threads(3) manpage.
+CRYPTO_set_id_callback().  This is described in the threads(3)
+manpage.
 
 * I've compiled a program under Windows and it crashes: why?
 
@@ -787,10 +630,10 @@ your application must link  against the same by which OpenSSL was
 built.  If you are using MS Visual C++ (Studio) this can be changed
 by:
 
- 1. Select Settings... from the Project Menu.
- 2. Select the C/C++ Tab.
- 3. Select "Code Generation from the "Category" drop down list box
- 4. Select the Appropriate library (see table below) from the "Use
+1.  Select Settings... from the Project Menu.
+2.  Select the C/C++ Tab.
+3.  Select "Code Generation from the "Category" drop down list box
+4.  Select the Appropriate library (see table below) from the "Use
     run-time library" drop down list box.  Perform this step for both
     your debug and release versions of your application (look at the
     top left of the settings panel to change between the two)
@@ -809,44 +652,30 @@ by:
 Note that debug and release libraries are NOT interchangeable.  If you
 built OpenSSL with /MD your application must use /MD and cannot use /MDd.
 
-As per 0.9.8 the above limitation is eliminated for .DLLs. OpenSSL
-.DLLs compiled with some specific run-time option [we insist on the
-default /MD] can be deployed with application compiled with different
-option or even different compiler. But there is a catch! Instead of
-re-compiling OpenSSL toolkit, as you would have to with prior versions,
-you have to compile small C snippet with compiler and/or options of
-your choice. The snippet gets installed as
-<install-root>/include/openssl/applink.c and should be either added to
-your application project or simply #include-d in one [and only one]
-of your application source files. Failure to link this shim module
-into your application manifests itself as fatal "no OPENSSL_Applink"
-run-time error. An explicit reminder is due that in this situation
-[mixing compiler options] it is as important to add CRYPTO_malloc_init
-prior first call to OpenSSL.
 
 * How do I read or write a DER encoded buffer using the ASN1 functions?
 
 You have two options. You can either use a memory BIO in conjunction
-with the i2d_*_bio() or d2i_*_bio() functions or you can use the
-i2d_*(), d2i_*() functions directly. Since these are often the
+with the i2d_XXX_bio() or d2i_XXX_bio() functions or you can use the
+i2d_XXX(), d2i_XXX() functions directly. Since these are often the
 cause of grief here are some code fragments using PKCS7 as an example:
 
- unsigned char *buf, *p;
- int len;
+unsigned char *buf, *p;
+int len;
 
- len = i2d_PKCS7(p7, NULL);
- buf = OPENSSL_malloc(len); /* or Malloc, error checking omitted */
- p = buf;
- i2d_PKCS7(p7, &p);
+len = i2d_PKCS7(p7, NULL);
+buf = OPENSSL_malloc(len); /* or Malloc, error checking omitted */
+p = buf;
+i2d_PKCS7(p7, &p);
 
 At this point buf contains the len bytes of the DER encoding of
 p7.
 
 The opposite assumes we already have len bytes in buf:
 
- unsigned char *p;
- p = buf;
- p7 = d2i_PKCS7(NULL, &p, len);
+unsigned char *p;
+p = buf;
+p7 = d2i_PKCS7(NULL, &p, len);
 
 At this point p7 contains a valid PKCS7 structure of NULL if an error
 occurred. If an error occurred ERR_print_errors(bio) should give more
@@ -908,11 +737,11 @@ code itself (the hex digits after the second colon).
 
 * Why do I get errors about unknown algorithms?
 
-The cause is forgetting to load OpenSSL's table of algorithms with
-OpenSSL_add_all_algorithms(). See the manual page for more information. This
-can cause several problems such as being unable to read in an encrypted
-PEM file, unable to decrypt a PKCS#12 file or signature failure when
-verifying certificates.
+This can happen under several circumstances such as reading in an
+encrypted private key or attempting to decrypt a PKCS#12 file. The cause
+is forgetting to load OpenSSL's table of algorithms with
+OpenSSL_add_all_algorithms(). See the manual page for more information.
+
 
 * Why can't the OpenSSH configure script detect OpenSSL?
 
@@ -980,46 +809,5 @@ thread-safe):
   ERR_free_strings(), EVP_cleanup() and CRYPTO_cleanup_all_ex_data().
 
 
-* Why does Valgrind complain about the use of uninitialized data?
-
-When OpenSSL's PRNG routines are called to generate random numbers the supplied
-buffer contents are mixed into the entropy pool: so it technically does not
-matter whether the buffer is initialized at this point or not.  Valgrind (and
-other test tools) will complain about this. When using Valgrind, make sure the
-OpenSSL library has been compiled with the PURIFY macro defined (-DPURIFY)
-to get rid of these warnings.
-
-
-* Why doesn't a memory BIO work when a file does?
-
-This can occur in several cases for example reading an S/MIME email message.
-The reason is that a memory BIO can do one of two things when all the data
-has been read from it.
-
-The default behaviour is to indicate that no more data is available and that
-the call should be retried, this is to allow the application to fill up the BIO
-again if necessary.
-
-Alternatively it can indicate that no more data is available and that EOF has
-been reached.
-
-If a memory BIO is to behave in the same way as a file this second behaviour
-is needed. This must be done by calling:
-
-   BIO_set_mem_eof_return(bio, 0);
-
-See the manual pages for more details.
-
-
-* Where are the declarations and implementations of d2i_X509() etc?
-
-These are defined and implemented by macros of the form:
-
-
- DECLARE_ASN1_FUNCTIONS(X509) and IMPLEMENT_ASN1_FUNCTIONS(X509)
-
-The implementation passes an ASN1 "template" defining the structure into an
-ASN1 interpreter using generalised functions such as ASN1_item_d2i().
-
-
 ===============================================================================
+

INSTALL

@@ -2,10 +2,8 @@
  INSTALLATION ON THE UNIX PLATFORM
  ---------------------------------
 
- [Installation on DOS (with djgpp), Windows, OpenVMS, MacOS (before MacOS X)
-  and NetWare is described in INSTALL.DJGPP, INSTALL.W32, INSTALL.VMS,
-  INSTALL.MacOS and INSTALL.NW.
-  
+ [Installation on DOS (with djgpp), Windows, OpenVMS and MacOS (before MacOS X)
+  is described in INSTALL.DJGPP, INSTALL.W32, INSTALL.VMS and INSTALL.MacOS.
   This document describes installation on operating systems in the Unix
   family.]
 
@@ -75,40 +73,18 @@
   no-asm        Do not use assembler code.
 
   386           Use the 80386 instruction set only (the default x86 code is
-                more efficient, but requires at least a 486). Note: Use
-                compiler flags for any other CPU specific configuration,
-                e.g. "-m32" to build x86 code on an x64 system.
-
-  no-sse2	Exclude SSE2 code pathes. Normally SSE2 extention is
-		detected at run-time, but the decision whether or not the
-		machine code will be executed is taken solely on CPU
-		capability vector. This means that if you happen to run OS
-		kernel which does not support SSE2 extension on Intel P4
-		processor, then your application might be exposed to
-		"illegal instruction" exception. There might be a way
-		to enable support in kernel, e.g. FreeBSD kernel can be
-		compiled with CPU_ENABLE_SSE, and there is a way to
-		disengage SSE2 code pathes upon application start-up,
-		but if you aim for wider "audience" running such kernel,
-		consider no-sse2. Both 386 and no-asm options above imply
-		no-sse2.
+                more efficient, but requires at least a 486).
 
   no-<cipher>   Build without the specified cipher (bf, cast, des, dh, dsa,
                 hmac, md2, md5, mdc2, rc2, rc4, rc5, rsa, sha).
                 The crypto/<cipher> directory can be removed after running
                 "make depend".
 
-  -Dxxx, -lxxx, -Lxxx, -fxxx, -mXXX, -Kxxx These system specific options will
+  -Dxxx, -lxxx, -Lxxx, -fxxx, -Kxxx These system specific options will
                 be passed through to the compiler to allow you to
                 define preprocessor symbols, specify additional libraries,
                 library directories or other compiler options.
 
-  -DHAVE_CRYPTODEV Enable the BSD cryptodev engine even if we are not using
-		BSD. Useful if you are running ocf-linux or something
-		similar. Once enabled you can also enable the use of
-		cryptodev digests, which is usually slower unless you have
-		large amounts data. Use -DUSE_CRYPTODEV_DIGESTS to force
-		it.
 
  Installation in Detail
  ----------------------
@@ -147,7 +123,7 @@
      generic configurations "cc" or "gcc" should usually work on 32 bit
      systems.
 
-     Configure creates the file Makefile.ssl from Makefile.org and
+     Configure creates the file Makefile from Makefile.org and
      defines various macros in crypto/opensslconf.h (generated from
      crypto/opensslconf.h.in).
 
@@ -164,7 +140,7 @@
      standard headers).  If it is a problem with OpenSSL itself, please
      report the problem to <openssl-bugs@openssl.org> (note that your
      message will be recorded in the request tracker publicly readable
-     via http://www.openssl.org/support/rt.html and will be forwarded to a
+     via http://www.openssl.org/support/rt2.html and will be forwarded to a
      public mailing list). Include the output of "make report" in your message.
      Please check out the request tracker. Maybe the bug was already
      reported or has already been fixed.
@@ -183,10 +159,10 @@
      the failure that isn't a problem in OpenSSL itself (like a missing
      or malfunctioning bc).  If it is a problem with OpenSSL itself,
      try removing any compiler optimization flags from the CFLAG line
-     in Makefile.ssl and run "make clean; make". Please send a bug
+     in Makefile and run "make clean; make". Please send a bug
      report to <openssl-bugs@openssl.org>, including the output of
      "make report" in order to be added to the request tracker at
-     http://www.openssl.org/support/rt.html.
+     http://www.openssl.org/support/rt2.html.
 
   4. If everything tests ok, install OpenSSL with
 
@@ -212,10 +188,6 @@
                        compile programs with libcrypto or libssl.
        lib             Contains the OpenSSL library files themselves.
 
-     Use "make install_sw" to install the software without documentation,
-     and "install_docs_html" to install HTML renditions of the manual
-     pages.
-
      Package builders who want to configure the library for standard
      locations, but have the package installed somewhere else so that
      it can easily be packaged, can use
@@ -312,10 +284,10 @@
  Note on shared libraries
  ------------------------
 
- Shared libraries have certain caveats.  Binary backward compatibility
- can't be guaranteed before OpenSSL version 1.0.  The only reason to
- use them would be to conserve memory on systems where several programs
- are using OpenSSL.
+ Shared library is currently an experimental feature.  The only reason to
+ have them would be to conserve memory on systems where several program
+ are using OpenSSL.  Binary backward compatibility can't be guaranteed
+ before OpenSSL version 1.0.
 
  For some systems, the OpenSSL Configure script knows what is needed to
  build shared libraries for libcrypto and libssl.  On these systems,
@@ -340,7 +312,7 @@
  Note on support for multiple builds
  -----------------------------------
 
- OpenSSL is usually built in its source tree.  Unfortunately, this doesn't
+ OpenSSL is usually built in it's source tree.  Unfortunately, this doesn't
  support building for multiple platforms from the same source tree very well.
  It is however possible to build in a separate tree through the use of lots
  of symbolic links, which should be prepared like this:

INSTALL.NW

@@ -1,454 +0,0 @@
-
-INSTALLATION ON THE NETWARE PLATFORM
-------------------------------------
-
-Notes about building OpenSSL for NetWare.
-
-
-BUILD PLATFORM:
----------------
-The build scripts (batch files, perl scripts, etc) have been developed and
-tested on W2K.  The scripts should run fine on other Windows platforms
-(NT, Win9x, WinXP) but they have not been tested.  They may require some
-modifications.
-
-
-Supported NetWare Platforms - NetWare 5.x, NetWare 6.x:
--------------------------------------------------------
-OpenSSL can either use the WinSock interfaces introduced in NetWare 5,
-or the BSD socket interface.  Previous versions of NetWare, 4.x and 3.x,
-are only supported if OpenSSL is build for CLIB and BSD sockets;
-WinSock builds only support NetWare 5 and up.
-
-On NetWare there are two c-runtime libraries.  There is the legacy CLIB 
-interfaces and the newer LIBC interfaces.  Being ANSI-C libraries, the 
-functionality in CLIB and LIBC is similar but the LIBC interfaces are built 
-using Novell Kernal Services (NKS) which is designed to leverage 
-multi-processor environments.
-
-The NetWare port of OpenSSL can be configured to build using CLIB or LIBC.
-The CLIB build was developed and tested using NetWare 5.0 sp6.0a.  The LIBC 
-build was developed and tested using the NetWare 6.0 FCS.  
-
-The necessary LIBC functionality ships with NetWare 6.  However, earlier 
-NetWare 5.x versions will require updates in order to run the OpenSSL LIBC
-build (NetWare 5.1 SP8 is known to work).
-
-As of June 2005, the LIBC build can be configured to use BSD sockets instead
-of WinSock sockets. Call Configure (usually through netware\build.bat) using
-a target of "netware-libc-bsdsock" instead of "netware-libc".
-
-As of June 2007, support for CLIB and BSD sockets is also now available
-using a target of "netware-clib-bsdsock" instead of "netware-clib";
-also gcc builds are now supported on both Linux and Win32 (post 0.9.8e).
-
-REQUIRED TOOLS:
----------------
-Based upon the configuration and build options used, some or all of the
-following tools may be required:
-
-* Perl for Win32 - required (http://www.activestate.com/ActivePerl)
-   Used to run the various perl scripts on the build platform.
-
-* Perl 5.8.0 for NetWare v3.20 (or later) - required 
-   (http://developer.novell.com) Used to run the test script on NetWare 
-   after building.
-
-* Compiler / Linker - required:
-   Metrowerks CodeWarrior PDK 2.1 (or later) for NetWare (commercial):
-      Provides command line tools used for building.
-      Tools:
-      mwccnlm.exe  - C/C++ Compiler for NetWare
-      mwldnlm.exe  - Linker for NetWare
-      mwasmnlm.exe - x86 assembler for NetWare (if using assembly option)
-
-   gcc / nlmconv Cross-Compiler, available from Novell Forge (free):
-         http://forge.novell.com/modules/xfmod/project/?aunixnw
-
-* Assemblers - optional:
-   If you intend to build using the assembly options you will need an
-   assembler.  Work has been completed to support two assemblers, Metrowerks
-   and NASM.  However, during development, a bug was found in the Metrowerks
-   assembler which generates incorrect code.  Until this problem is fixed,
-   the Metrowerks assembler cannot be used.
-
-   mwasmnlm.exe - Metrowerks x86 assembler - part of CodeWarrior tools.
-         (version 2.2 Built Aug 23, 1999 - not useable due to code
-          generation bug)
-
-   nasmw.exe - Netwide Assembler NASM
-         version 0.98 was used in development and testing
-
-* Make Tool - required:
-   In order to build you will need a make tool.  Two make tools are
-   supported, GNU make (gmake.exe) or Microsoft nmake.exe.
-
-   make.exe - GNU make for Windows (version 3.75 used for development)
-         http://gnuwin32.sourceforge.net/packages/make.htm
-
-   nmake.exe - Microsoft make (Version 6.00.8168.0 used for development)
-         http://support.microsoft.com/kb/132084/EN-US/
-
-* Novell Developer Kit (NDK) - required: (http://developer.novell.com)
-
-   CLIB - BUILDS:
-
-      WinSock2 Developer Components for NetWare:
-         For initial development, the October 27, 2000 version was used.
-         However, future versions should also work.
-
-         NOTE:  The WinSock2 components include headers & import files for
-         NetWare, but you will also need the winsock2.h and supporting
-         headers (pshpack4.h, poppack.h, qos.h) delivered in the
-         Microsoft SDK.  Note: The winsock2.h support headers may change
-         with various versions of winsock2.h.  Check the dependencies
-         section on the NDK WinSock2 download page for the latest
-         information on dependencies. These components are unsupported by
-         Novell. They are provided as a courtesy, but it is strongly
-         suggested that all development be done using LIBC, not CLIB.
-
-         As of June 2005, the WinSock2 components are available at:
-         http://forgeftp.novell.com//ws2comp/
-
-
-      NLM and NetWare libraries for C (including CLIB and XPlat):
-         If you are going to build a CLIB version of OpenSSL, you will
-         need the CLIB headers and imports.  The March, 2001 NDK release or 
-         later is recommended.
-
-         Earlier versions should work but haven't been tested.  In recent
-         versions the import files have been consolidated and function
-         names moved.  This means you may run into link problems
-         (undefined symbols) when using earlier versions.   The functions
-         are available in earlier versions, but you will have to modifiy
-         the make files to include additional import files (see
-         openssl\util\pl\netware.pl).
-
-
-   LIBC - BUILDS:
-   
-      Libraries for C (LIBC) - LIBC headers and import files
-         If you are going to build a LIBC version of OpenSSL, you will
-         need the LIBC headers and imports.  The March 14, 2002 NDK release or
-         later is required.  
-         
-         NOTE: The LIBC SDK includes the necessary WinSock2 support.
-         It is not necessary to download the WinSock2 NDK when building for
-         LIBC. The LIBC SDK also includes the appropriate BSD socket support
-         if configuring to use BSD sockets.
-
-
-BUILDING:
----------
-Before building, you will need to set a few environment variables.  You can
-set them manually or you can modify the "netware\set_env.bat" file.
-
-The set_env.bat file is a template you can use to set up the path
-and environment variables you will need to build.  Modify the
-various lines to point to YOUR tools and run set_env.bat.
-
-   netware\set_env.bat <target> [compiler]
-
-      target        - "netware-clib" - CLIB NetWare build
-                    - "netware-libc" - LIBC NetWare build
-
-      compiler      - "gnuc"         - GNU GCC Compiler
-                    - "codewarrior"  - MetroWerks CodeWarrior (default)
-
-If you don't use set_env.bat, you will need to set up the following
-environment variables:
-
-   PATH - Set PATH to point to the tools you will use.
-
-   INCLUDE - The location of the NDK include files.
-         
-            CLIB ex: set INCLUDE=c:\ndk\nwsdk\include\nlm
-            LIBC ex: set INCLUDE=c:\ndk\libc\include
-
-   PRELUDE - The absolute path of the prelude object to link with.  For
-            a CLIB build it is recommended you use the "clibpre.o" files shipped
-            with the Metrowerks PDK for NetWare.  For a LIBC build you should 
-            use the "libcpre.o" file delivered with the LIBC NDK components.
-
-            CLIB ex: set PRELUDE=c:\ndk\nwsdk\imports\clibpre.o
-            LIBC ex: set PRELUDE=c:\ndk\libc\imports\libcpre.o
-
-   IMPORTS - The locaton of the NDK import files.
-
-            CLIB ex: set IMPORTS=c:\ndk\nwsdk\imports
-            LIBC ex: set IMPORTS=c:\ndk\libc\imports
-
-
-In order to build, you need to run the Perl scripts to configure the build
-process and generate a make file.  There is a batch file,
-"netware\build.bat", to automate the process.
-
-Build.bat runs the build configuration scripts and generates a make file.
-If an assembly option is specified, it also runs the scripts to generate 
-the assembly code.  Always run build.bat from the "openssl" directory.
-
-   netware\build [target] [debug opts] [assembly opts] [configure opts]
-
-      target        - "netware-clib" - CLIB NetWare build (WinSock Sockets)
-                    - "netware-clib-bsdsock" - CLIB NetWare build (BSD Sockets)
-                    - "netware-libc" - LIBC NetWare build (WinSock Sockets)
-                    - "netware-libc-bsdsock" - LIBC NetWare build (BSD Sockets)
- 
-      debug opts    - "debug"  - build debug
-
-      assembly opts - "nw-mwasm" - use Metrowerks assembler
-                      "nw-nasm"  - use NASM assembler
-                      "no-asm"   - don't use assembly
-
-      configure opts- all unrecognized arguments are passed to the
-                      perl 'configure' script. See that script for
-                      internal documentation regarding options that
-                      are available.
-
-   examples:
-
-      CLIB build, debug, without assembly:
-         netware\build.bat netware-clib debug no-asm
-
-      LIBC build, non-debug, using NASM assembly, add mdc2 support:
-         netware\build.bat netware-libc nw-nasm enable-mdc2
-
-      LIBC build, BSD sockets, non-debug, without assembly:
-         netware\build.bat netware-libc-bsdsock no-asm
-
-Running build.bat generates a make file to be processed by your make 
-tool (gmake or nmake):
-
-   CLIB ex: gmake -f netware\nlm_clib_dbg.mak 
-   LIBC ex: gmake -f netware\nlm_libc.mak 
-   LIBC ex: gmake -f netware\nlm_libc_bsdsock.mak 
-
-
-You can also run the build scripts manually if you do not want to use the
-build.bat file.  Run the following scripts in the "\openssl"
-subdirectory (in the order listed below):
-
-   perl configure no-asm [other config opts] [netware-clib|netware-libc|netware-libc-bsdsock]
-      configures no assembly build for specified netware environment
-      (CLIB or LIBC).
-
-   perl util\mkfiles.pl >MINFO
-      generates a listing of source files (used by mk1mf)
-
-   perl util\mk1mf.pl no-asm [other config opts] [netware-clib|netware-libc|netware-libc-bsdsock >netware\nlm.mak
-      generates the makefile for NetWare
-
-   gmake -f netware\nlm.mak
-      build with the make tool (nmake.exe also works)
-
-NOTE:  If you are building using the assembly option, you must also run the
-various Perl scripts to generate the assembly files.  See build.bat
-for an example of running the various assembly scripts.  You must use the
-"no-asm" option to build without assembly.  The configure and mk1mf scripts
-also have various other options.  See the scripts for more information.
-
-
-The output from the build is placed in the following directories:
-
-   CLIB Debug build:
-      out_nw_clib.dbg     - static libs & test nlm(s)
-      tmp_nw_clib.dbg     - temporary build files
-      outinc_nw_clib      - necessary include files
-
-   CLIB Non-debug build:
-      out_nw_clib         - static libs & test nlm(s)
-      tmp_nw_clib         - temporary build files
-      outinc_nw_clib      - necesary include files
-
-   LIBC Debug build:
-      out_nw_libc.dbg     - static libs & test nlm(s)
-      tmp_nw_libc.dbg     - temporary build files
-      outinc_nw_libc      - necessary include files
-
-   LIBC Non-debug build:
-      out_nw_libc         - static libs & test nlm(s)
-      tmp_nw_libc         - temporary build files
-      outinc_nw_libc      - necesary include files
-
-
-TESTING:
---------
-The build process creates the OpenSSL static libs ( crypto.lib, ssl.lib,
-rsaglue.lib ) and several test programs.  You should copy the test programs
-to your NetWare server and run the tests.
-
-The batch file "netware\cpy_tests.bat" will copy all the necessary files
-to your server for testing.  In order to run the batch file, you need a
-drive mapped to your target server.  It will create an "OpenSSL" directory
-on the drive and copy the test files to it.  CAUTION: If a directory with the
-name of "OpenSSL" already exists, it will be deleted.
-
-To run cpy_tests.bat:
-
-   netware\cpy_tests [output directory] [NetWare drive]
-
-      output directory - "out_nw_clib.dbg", "out_nw_libc", etc.
-      NetWare drive    - drive letter of mapped drive
-
-      CLIB ex: netware\cpy_tests out_nw_clib m:
-      LIBC ex: netware\cpy_tests out_nw_libc m:
-
-
-The Perl script, "do_tests.pl", in the "OpenSSL" directory on the server
-should be used to execute the tests.  Before running the script, make sure
-your SEARCH PATH includes the "OpenSSL" directory.  For example, if you
-copied the files to the "sys:" volume you use the command:
-
-   SEARCH ADD SYS:\OPENSSL
-
-
-To run do_tests.pl type (at the console prompt):
-
-   perl \openssl\do_tests.pl [options]
-
-      options:
-         -p    - pause after executing each test
-
-The do_tests.pl script generates a log file "\openssl\test_out\tests.log"
-which should be reviewed for errors.  Any errors will be denoted by the word
-"ERROR" in the log.
-
-DEVELOPING WITH THE OPENSSL SDK:
---------------------------------
-Now that everything is built and tested, you are ready to use the OpenSSL
-libraries in your development.
-
-There is no real installation procedure, just copy the static libs and
-headers to your build location.  The libs (crypto.lib & ssl.lib) are
-located in the appropriate "out_nw_XXXX" directory 
-(out_nw_clib, out_nw_libc, etc).  
-
-The headers are located in the appropriate "outinc_nw_XXX" directory 
-(outinc_nw_clib, outinc_nw_libc).  
-
-One suggestion is to create the following directory 
-structure for the OpenSSL SDK:
-
-   \openssl
-      |- bin
-      |   |- openssl.nlm
-      |   |- (other tests you want)
-      |
-      |- lib
-      |   | - crypto.lib
-      |   | - ssl.lib
-      |
-      |- include
-      |   | - openssl
-      |   |    | - (all the headers in "outinc_nw\openssl")
-
-
-The program "openssl.nlm" can be very useful.  It has dozens of
-options and you may want to keep it handy for debugging, testing, etc.
-
-When building your apps using OpenSSL, define "NETWARE".  It is needed by
-some of the OpenSSL headers.  One way to do this is with a compile option,
-for example "-DNETWARE".
-
-
-
-NOTES:
-------
-
-Resource leaks in Tests
-------------------------
-Some OpenSSL tests do not clean up resources and NetWare reports
-the resource leaks when the tests unload.  If this really bugs you,
-you can stop the messages by setting the developer option off at the console
-prompt (set developer option = off).  Or better yet, fix the tests to
-clean up the resources!
-
-
-Multi-threaded Development
----------------------------
-The NetWare version of OpenSSL is thread-safe, however multi-threaded
-applications must provide the necessary locking function callbacks.  This
-is described in doc\threads.doc.  The file "openssl-x.x.x\crypto\threads\mttest.c"
-is a multi-threaded test program and demonstrates the locking functions.
-
-
-What is openssl2.nlm?
----------------------
-The openssl program has numerous options and can be used for many different
-things.  Many of the options operate in an interactive mode requiring the
-user to enter data.  Because of this, a default screen is created for the
-program.  However, when running the test script it is not desirable to
-have a seperate screen.  Therefore, the build also creates openssl2.nlm.
-Openssl2.nlm is functionally identical but uses the console screen.
-Openssl2 can be used when a non-interactive mode is desired.
-
-NOTE:  There are may other possibilities (command line options, etc)
-which could have been used to address the screen issue.  The openssl2.nlm
-option was chosen because it impacted only the build not the code.
-
-
-Why only static libraries?
---------------------------
-Globals, globals, and more globals.  The OpenSSL code uses many global
-variables that are allocated and initialized when used for the first time.
-
-On NetWare, most applications (at least historically) run in the kernel.
-When running in the kernel, there is one instance of global variables.
-For regular application type NLM(s) this isn't a problem because they are
-the only ones using the globals.  However, for a library NLM (an NLM which
-exposes functions and has no threads of execution), the globals cause
-problems.  Applications could inadvertently step on each other if they
-change some globals.  Even worse, the first application that triggers a
-global to be allocated and initialized has the allocated memory charged to
-itself.  Now when that application unloads, NetWare will clean up all the
-applicaton's memory.  The global pointer variables inside OpenSSL now
-point to freed memory.  An abend waiting to happen!
-
-To work correctly in the kernel, library NLM(s) that use globals need to
-provide a set of globals (instance data) for each application.  Another
-option is to require the library only be loaded in a protected address
-space along with the application using it.
-
-Modifying the OpenSSL code to provide a set of globals (instance data) for
-each application isn't technically difficult, but due to the large number
-globals it would require substantial code changes and it wasn't done.  Hence,
-the build currently only builds static libraries which are then linked
-into each application.
-
-NOTE:  If you are building a library NLM that uses the OpenSSL static
-libraries, you will still have to deal with the global variable issue.
-This is because when you link in the OpenSSL code you bring in all the
-globals.  One possible solution for the global pointer variables is to
-register memory functions with OpenSSL which allocate memory and charge it
-to your library NLM (see the function CRYPTO_set_mem_functions).  However,
-be aware that now all memory allocated by OpenSSL is charged to your NLM.
-
-
-CodeWarrior Tools and W2K
----------------------------
-There have been problems reported with the CodeWarrior Linker
-(mwldnlm.exe) in the PDK 2.1 for NetWare when running on Windows 2000.  The
-problems cause the link step to fail.  The only work around is to obtain an
-updated linker from Metrowerks.  It is expected Metrowerks will release
-PDK 3.0 (in beta testing at this time - May, 2001) in the near future which
-will fix these problems.
-
-
-Makefile "vclean"
-------------------
-The generated makefile has a "vclean" target which cleans up the build
-directories.  If you have been building successfully and suddenly
-experience problems, use "vclean" (gmake -f netware\nlm_xxxx.mak vclean) and retry.
-
-
-"Undefined Symbol" Linker errors
---------------------------------
-There have been linker errors reported when doing a CLIB build.  The problems
-occur because some versions of the CLIB SDK import files inadvertently 
-left out some symbols.  One symbol in particular is "_lrotl".  The missing
-functions are actually delivered in the binaries, but they were left out of
-the import files.  The issues should be fixed in the September 2001 release 
-of the NDK.  If you experience the problems you can temporarily
-work around it by manually adding the missing symbols to your version of 
-"clib.imp".
-

INSTALL.W32

@@ -3,32 +3,20 @@
  ----------------------------------
 
  [Instructions for building for Windows CE can be found in INSTALL.WCE]
- [Instructions for building for Win64 can be found in INSTALL.W64]
 
- Here are a few comments about building OpenSSL for Win32 environments,
- such as Windows NT and Windows 9x. It should be noted though that
- Windows 9x are not ordinarily tested. Its mention merely means that we
- attempt to maintain certain programming discipline and pay attention
- to backward compatibility issues, in other words it's kind of expected
- to work on Windows 9x, but no regression tests are actually performed.
+ Heres a few comments about building OpenSSL in Windows environments.  Most
+ of this is tested on Win32 but it may also work in Win 3.1 with some
+ modification.
 
- On additional note newer OpenSSL versions are compiled and linked with
- Winsock 2. This means that minimum OS requirement was elevated to NT 4
- and Windows 98 [there is Winsock 2 update for Windows 95 though].
+ You need Perl for Win32.  Unless you will build on Cygwin, you will need
+ ActiveState Perl, available from http://www.activestate.com/ActivePerl.
 
- - you need Perl for Win32.  Unless you will build on Cygwin, you will need
-   ActiveState Perl, available from http://www.activestate.com/ActivePerl.
-
- - one of the following C compilers:
+ and one of the following C compilers:
 
   * Visual C++
   * Borland C
   * GNU C (Cygwin or MinGW)
 
-- Netwide Assembler, a.k.a. NASM, available from http://nasm.sourceforge.net/
-  is required if you intend to utilize assembler modules. Note that NASM
-  is now the only supported assembler.
-
  If you are compiling from a tarball or a CVS snapshot then the Win32 files
  may well be not up to date. This may mean that some "tweaking" is required to
  get it all to work. See the trouble shooting section later on for if (when?)
@@ -37,18 +25,38 @@
  Visual C++
  ----------
 
- If you want to compile in the assembly language routines with Visual
- C++, then you will need already mentioned Netwide Assembler binary,
- nasmw.exe or nasm.exe, to be available on your %PATH%.
+ If you want to compile in the assembly language routines with Visual C++ then
+ you will need an assembler. This is worth doing because it will result in
+ faster code: for example it will typically result in a 2 times speedup in the
+ RSA routines. Currently the following assemblers are supported:
 
- Firstly you should run Configure with platform VC-WIN32:
+  * Microsoft MASM (aka "ml")
+  * Free Netwide Assembler NASM.
 
- > perl Configure VC-WIN32 --prefix=c:\some\openssl\dir
+ MASM is distributed with most versions of VC++. For the versions where it is
+ not included in VC++, it is also distributed with some Microsoft DDKs, for
+ example the Windows NT 4.0 DDK and the Windows 98 DDK. If you do not have
+ either of these DDKs then you can just download the binaries for the Windows
+ 98 DDK and extract and rename the two files XXXXXml.exe and XXXXXml.err, to
+ ml.exe and ml.err and install somewhere on your PATH. Both DDKs can be
+ downloaded from the Microsoft developers site www.msdn.com.
 
- Where the prefix argument specifies where OpenSSL will be installed to.
+ NASM is freely available. Version 0.98 was used during testing: other versions
+ may also work. It is available from many places, see for example:
+ http://www.kernel.org/pub/software/devel/nasm/binaries/win32/
+ The NASM binary nasmw.exe needs to be installed anywhere on your PATH.
 
- Next you need to build the Makefiles and optionally the assembly
- language files:
+ Firstly you should run Configure (to build a FIPS-certified variant of
+ OpenSSL, add the option "fips"):
+
+ > perl Configure VC-WIN32
+
+ Next you need to build the Makefiles and optionally the assembly language
+ files (to build a FIPS-certified variant of OpenSSL, add the argument "fips"):
+
+ - If you are using MASM then run:
+
+   > ms\do_masm
 
  - If you are using NASM then run:
 
@@ -56,7 +64,6 @@
 
  - If you don't want to use the assembly language files at all then run:
 
-   > perl Configure VC-WIN32 no-asm --prefix=c:/some/openssl/dir
    > ms\do_ms
 
  If you get errors about things not having numbers assigned then check the
@@ -67,46 +74,39 @@
 
  > nmake -f ms\ntdll.mak
 
- If all is well it should compile and you will have some DLLs and
- executables in out32dll. If you want to try the tests then do:
+ If all is well it should compile and you will have some DLLs and executables
+ in out32dll. If you want to try the tests then do:
  
- > nmake -f ms\ntdll.mak test
-
-
- To install OpenSSL to the specified location do:
-
- > nmake -f ms\ntdll.mak install
+ > cd out32dll
+ > ..\ms\test
 
  Tweaks:
 
- There are various changes you can make to the Win32 compile
- environment. By default the library is not compiled with debugging
- symbols. If you use the platform debug-VC-WIN32 instead of VC-WIN32
- then debugging symbols will be compiled in.
-
- By default in 1.0.0 OpenSSL will compile builtin ENGINES into the
- separate shared librariesy. If you specify the "enable-static-engine"
- option on the command line to Configure the shared library build
- (ms\ntdll.mak) will compile the engines into libeay32.dll instead.
+ There are various changes you can make to the Win32 compile environment. By
+ default the library is not compiled with debugging symbols. If you add 'debug'
+ to the mk1mf.pl lines in the do_* batch file then debugging symbols will be
+ compiled in. Note that mk1mf.pl expects the platform to be the last argument
+ on the command line, so 'debug' must appear before that, as all other options.
 
  The default Win32 environment is to leave out any Windows NT specific
  features.
 
- If you want to enable the NT specific features of OpenSSL (currently
- only the logging BIO) follow the instructions above but call the batch
- file do_nt.bat instead of do_ms.bat.
+ If you want to enable the NT specific features of OpenSSL (currently only the
+ logging BIO) follow the instructions above but call the batch file do_nt.bat
+ instead of do_ms.bat.
 
  You can also build a static version of the library using the Makefile
  ms\nt.mak
 
-
  Borland C++ builder 5
  ---------------------
 
- * Configure for building with Borland Builder:
+ * Configure for building with Borland Builder (to build a FIPS-certified
+   variant of OpenSSL, add the option "fips"):
    > perl Configure BC-32
 
- * Create the appropriate makefile
+ * Create the appropriate makefile (to build a FIPS-certified variant of
+   OpenSSL, add the argument "fips")
    > ms\do_nasm
 
  * Build
@@ -125,13 +125,17 @@
  GNU C (Cygwin)
  --------------
 
- Cygwin implements a Posix/Unix runtime system (cygwin1.dll) on top of
- Win32 subsystem and provides a bash shell and GNU tools environment.
- Consequently, a make of OpenSSL with Cygwin is virtually identical to
- Unix procedure. It is also possible to create Win32 binaries that only
- use the Microsoft C runtime system (msvcrt.dll or crtdll.dll) using
- MinGW. MinGW can be used in the Cygwin development environment or in a
- standalone setup as described in the following section.
+ Cygwin provides a bash shell and GNU tools environment running
+ on NT 4.0, Windows 9x, Windows ME, Windows 2000, and Windows XP.
+ Consequently, a make of OpenSSL with Cygwin is closer to a GNU
+ bash environment such as Linux than to other the other Win32
+ makes.
+
+ Cygwin implements a Posix/Unix runtime system (cygwin1.dll).
+ It is also possible to create Win32 binaries that only use the
+ Microsoft C runtime system (msvcrt.dll or crtdll.dll) using
+ MinGW. MinGW can be used in the Cygwin development environment
+ or in a standalone setup as described in the following section.
 
  To build OpenSSL using Cygwin:
 
@@ -176,44 +180,37 @@
  non-fatal error in "make test" but is otherwise harmless.  If
  desired and needed, GNU bc can be built with Cygwin without change.
 
- GNU C (MinGW/MSYS)
+ GNU C (MinGW)
  -------------
 
- * Compiler and shell environment installation:
+ * Compiler installation:
 
-   MinGW and MSYS are available from http://www.mingw.org/, both are
-   required. Run the installers and do whatever magic they say it takes
-   to start MSYS bash shell with GNU tools on its PATH.
-
-   N.B. Since source tar-ball can contain symbolic links, it's essential
-   that you use accompanying MSYS tar to unpack the source. It will
-   either handle them in one way or another or fail to extract them,
-   which does the trick too. Latter means that you may safely ignore all
-   "cannot create symlink" messages, as they will be "re-created" at
-   configure stage by copying corresponding files. Alternative programs
-   were observed to create empty files instead, which results in build
-   failure.
+   MinGW is available from http://www.mingw.org. Run the installer and
+   set the MinGW bin directory to the PATH in "System Properties" or
+   autoexec.bat.
 
  * Compile OpenSSL:
 
-   $ ./config
-   [...]
-   $ make
-   [...]
-   $ make test
+   > ms\mingw32
 
-   This will create the library and binaries in root source directory
-   and openssl.exe application in apps directory.
-
-   It is also possible to cross-compile it on Linux by configuring
-   with './Configure --cross-compile-prefix=i386-mingw32- mingw ...'.
-   'make test' is naturally not applicable then.
+   This will create the library and binaries in out. In case any problems
+   occur, try
+   > ms\mingw32 no-asm
+   instead.
+   If you want to build a FIPS-certified variant of OpenSSL, add the argument
+   "fips"
 
    libcrypto.a and libssl.a are the static libraries. To use the DLLs,
    link with libeay32.a and libssl32.a instead.
 
-   See troubleshooting if you get error messages about functions not
-   having a number assigned.
+   See troubleshooting if you get error messages about functions not having
+   a number assigned.
+
+ * You can now try the tests:
+
+   > cd out
+   > ..\ms\test
+
 
  Installation
  ------------
@@ -294,32 +291,3 @@
  (e.g. fopen()), and OpenSSL cannot change these; so in general you cannot
  rely on CRYPTO_malloc_init() solving your problem, and you should
  consistently use the multithreaded library.
-
- Linking your application
- ------------------------
-
- If you link with static OpenSSL libraries [those built with ms/nt.mak],
- then you're expected to additionally link your application with
- WS2_32.LIB, ADVAPI32.LIB, GDI32.LIB and USER32.LIB. Those developing
- non-interactive service applications might feel concerned about linking
- with the latter two, as they are justly associated with interactive
- desktop, which is not available to service processes. The toolkit is
- designed to detect in which context it's currently executed, GUI,
- console app or service, and act accordingly, namely whether or not to
- actually make GUI calls. Additionally those who wish to
- /DELAYLOAD:GDI32.DLL and /DELAYLOAD:USER32.DLL and actually keep them
- off service process should consider implementing and exporting from
- .exe image in question own _OPENSSL_isservice not relying on USER32.DLL.
- E.g., on Windows Vista and later you could:
-
-	__declspec(dllexport) __cdecl BOOL _OPENSSL_isservice(void)
-	{   DWORD sess;
-	    if (ProcessIdToSessionId(GetCurrentProcessId(),&sess))
-	        return sess==0;
-	    return FALSE;
-	}
-
- If you link with OpenSSL .DLLs, then you're expected to include into
- your application code small "shim" snippet, which provides glue between
- OpenSSL BIO layer and your compiler run-time. Look up OPENSSL_Applink
- reference page for further details.

INSTALL.W64

@@ -1,66 +0,0 @@
-
- INSTALLATION ON THE WIN64 PLATFORM
- ----------------------------------
-
- Caveat lector
- -------------
-
- As of moment of this writing Win64 support is classified "initial"
- for the following reasons.
-
- - No assembler modules are engaged upon initial 0.9.8 release.
- - API might change within 0.9.8 life-span, *but* in a manner which
-   doesn't break backward binary compatibility. Or in other words,
-   application programs compiled with initial 0.9.8 headers will
-   be expected to work with future minor release .DLL without need
-   to re-compile, even if future minor release features modified API.
- - Above mentioned API modifications have everything to do with
-   elimination of a number of limitations, which are normally
-   considered inherent to 32-bit platforms. Which in turn is why they
-   are treated as limitations on 64-bit platform such as Win64:-)
-   The current list comprises [but not necessarily limited to]:
-
-   - null-terminated strings may not be longer than 2G-1 bytes,
-     longer strings are treated as zero-length;
-   - dynamically and *internally* allocated chunks can't be larger
-     than 2G-1 bytes;
-   - inability to encrypt/decrypt chunks of data larger than 4GB
-     [it's possibly to *hash* chunks of arbitrary size through];
-
-   Neither of these is actually big deal and hardly encountered
-   in real-life applications.
-
- Compiling procedure
- -------------------
-
- You will need Perl. You can run under Cygwin or you can download
- ActiveState Perl from http://www.activestate.com/ActivePerl.
-
- You will need Microsoft Platform SDK, available for download at
- http://www.microsoft.com/msdownload/platformsdk/sdkupdate/. As per
- April 2005 Platform SDK is equipped with Win64 compilers, as well
- as assemblers, but it might change in the future.
-
- To build for Win64/x64:
-
- > perl Configure VC-WIN64A
- > ms\do_win64a
- > nmake -f ms\ntdll.mak
- > cd out32dll
- > ..\ms\test
-
- To build for Win64/IA64:
-
- > perl Configure VC-WIN64I
- > ms\do_win64i
- > nmake -f ms\ntdll.mak
- > cd out32dll
- > ..\ms\test
-
- Naturally test-suite itself has to be executed on the target platform.
-
- Installation
- ------------
-
- TBD, for now see INSTALL.W32.
-

INSTALL.WCE

@@ -4,36 +4,24 @@
 
  Building OpenSSL for Windows CE requires the following external tools:
 
-  * Microsoft eMbedded Visual C++ 3.0 or later
-  * Appropriate SDK might be required
-  * Perl for Win32 [commonly recommended ActiveState Perl is available
-    from http://www.activestate.com/Products/ActivePerl/]
+  * Microsoft eMbedded Visual C++ 3.0
+  * wcecompat compatibility library (www.essemer.com.au)
+  * Optionally ceutils for running automated tests (www.essemer.com.au)
 
-  * wcecompat compatibility library available at
-    http://www.essemer.com.au/windowsce/
-  * Optionally ceutils for running automated tests (same location)
+ You also need Perl for Win32.  You will need ActiveState Perl, available
+ from http://www.activestate.com/ActivePerl.
 
-  _or_
+ Windows CE support in OpenSSL relies on wcecompat.  All Windows CE specific
+ issues should be directed to www.essemer.com.au.
 
-  * PocketConsole driver and PortSDK available at
-    http://www.symbolictools.de/public/pocketconsole/
-  * CMD command interpreter (same location)
-
- As Windows CE support in OpenSSL relies on 3rd party compatibility
- library, it's appropriate to check corresponding URL for updates. For
- example if you choose wcecompat, note that as for the moment of this
- writing version 1.2 is available and actually required for WCE 4.2
- and newer platforms. All wcecompat issues should be directed to
- www.essemer.com.au.
-
- Why compatibility library at all? The C Runtime Library implementation
- for Windows CE that is included with Microsoft eMbedded Visual C++ is
- incomplete and in some places incorrect.  Compatibility library plugs
- the holes and tries to bring the Windows CE CRT to [more] usable level.
- Most gaping hole in CRT is support for stdin/stdout/stderr IO, which
- proposed compatibility libraries solve in two different ways: wcecompat
- redirects IO to active sync link, while PortSDK - to NT-like console
- driver on the handheld itself.
+ The C Runtime Library implementation for Windows CE that is included with
+ Microsoft eMbedded Visual C++ 3.0 is incomplete and in some places
+ incorrect.  wcecompat plugs the holes and tries to bring the Windows CE
+ CRT to a level that is more compatible with ANSI C.  wcecompat goes further
+ and provides low-level IO and stream IO support for stdin/stdout/stderr
+ (which Windows CE does not provide).  This IO functionality is not needed
+ by the OpenSSL library itself but is used for the tests and openssl.exe.
+ More information is available at www.essemer.com.au.
 
  Building
  --------
@@ -43,21 +31,9 @@
 
  > "C:\Program Files\Microsoft eMbedded Tools\EVC\WCE300\BIN\WCEARM.BAT"
 
- Next pick compatibility library according to your preferences.
+ Next indicate where wcecompat is located:
 
- 1. To choose wcecompat set up WCECOMPAT environment variable pointing
-    at the location of wcecompat tree "root":
-
-    > set WCECOMPAT=C:\wcecompat
-    > set PORTSDK_LIBPATH=
-
- 2. To choose PortSDK set up PORTSDK_LIBPATH to point at hardware-
-    specific location where your portlib.lib is installed:
-
-    > set PORTSDK_LIBPATH=C:\PortSDK\lib\ARM
-    > set WCECOMPAT=
-
- Note that you may not set both variables.
+ > set WCECOMPAT=C:\wcecompat
 
  Next you should run Configure:
 
@@ -73,16 +49,16 @@
 
  Then from the VC++ environment at a prompt do:
 
+ - to build static libraries:
+
+   > nmake -f ms\ce.mak
+
+ - or to build DLLs:
+
    > nmake -f ms\cedll.mak
 
- [note that static builds are not supported under CE]
-
- If all is well it should compile and you will have some DLLs and executables
- in out32dll*. 
-
- <<< everyting below needs revision in respect to wcecompat vs. PortSDK >>>
-
- If you want
+ If all is well it should compile and you will have some static libraries and
+ executables in out32, or some DLLs and executables in out32dll.  If you want
  to try the tests then make sure the ceutils are in the path and do:
  
  > cd out32

LICENSE

@@ -12,7 +12,7 @@
   ---------------
 
 /* ====================================================================
- * Copyright (c) 1998-2011 The OpenSSL Project.  All rights reserved.
+ * Copyright (c) 1998-2007 The OpenSSL Project.  All rights reserved.
  *
  * Redistribution and use in source and binary forms, with or without
  * modification, are permitted provided that the following conditions

MacOS/GetHTTPS.src/ErrorHandling.hpp

@@ -29,7 +29,7 @@ OSErr AppendErrorMessageToHandle(Handle inoutHandle);
 
 
 
-//	A bunch of evil macros that would be unnecessary if I were always using C++ !
+//	A bunch of evil macros that would be uneccessary if I were always using C++ !
 
 #define SetErrorMessageAndBailIfNil(theArg,theMessage)								\
 {																					\

Makefile.shared

@@ -1,655 +0,0 @@
-#
-# Helper makefile to link shared libraries in a portable way.
-# This is much simpler than libtool, and hopefully not too error-prone.
-#
-# The following variables need to be set on the command line to build
-# properly
-
-# CC contains the current compiler.  This one MUST be defined
-CC=cc
-CFLAGS=$(CFLAG)
-# LDFLAGS contains flags to be used when temporary object files (when building
-# shared libraries) are created, or when an application is linked.
-# SHARED_LDFLAGS contains flags to be used when the shared library is created.
-LDFLAGS=
-SHARED_LDFLAGS=
-
-NM=nm
-
-# LIBNAME contains just the name of the library, without prefix ("lib"
-# on Unix, "cyg" for certain forms under Cygwin...) or suffix (.a, .so,
-# .dll, ...).  This one MUST have a value when using this makefile to
-# build shared libraries.
-# For example, to build libfoo.so, you need to do the following:
-#LIBNAME=foo
-LIBNAME=
-
-# APPNAME contains just the name of the application, without suffix (""
-# on Unix, ".exe" on Windows, ...).  This one MUST have a value when using
-# this makefile to build applications.
-# For example, to build foo, you need to do the following:
-#APPNAME=foo
-APPNAME=
-
-# OBJECTS contains all the object files to link together into the application.
-# This must contain at least one object file.
-#OBJECTS=foo.o
-OBJECTS=
-
-# LIBEXTRAS contains extra modules to link together with the library.
-# For example, if a second library, say libbar.a needs to be linked into
-# libfoo.so, you need to do the following:
-#LIBEXTRAS=libbar.a
-# Note that this MUST be used when using the link_o targets, to hold the
-# names of all object files that go into the target library.
-LIBEXTRAS=
-
-# LIBVERSION contains the current version of the library.
-# For example, to build libfoo.so.1.2, you need to do the following:
-#LIBVERSION=1.2
-LIBVERSION=
-
-# LIBCOMPATVERSIONS contains the compatibility versions (a list) of
-# the library.  They MUST be in decreasing order.
-# For example, if libfoo.so.1.2.1 is backward compatible with libfoo.so.1.2
-# and libfoo.so.1, you need to do the following:
-#LIBCOMPATVERSIONS=1.2 1
-# Note that on systems that use sonames, the last number will appear as
-# part of it.
-# It's also possible, for systems that support it (Tru64, for example),
-# to add extra compatibility info with more precision, by adding a second
-# list of versions, separated from the first with a semicolon, like this:
-#LIBCOMPATVERSIONS=1.2 1;1.2.0 1.1.2 1.1.1 1.1.0 1.0.0
-LIBCOMPATVERSIONS=
-
-# LIBDEPS contains all the flags necessary to cover all necessary
-# dependencies to other libraries.
-LIBDEPS=
-
-#------------------------------------------------------------------------------
-# The rest is private to this makefile.
-
-SET_X=:
-#SET_X=set -x
-
-top:
-	echo "Trying to use this makefile interactively?  Don't."
-
-CALC_VERSIONS=	\
-	SHLIB_COMPAT=; SHLIB_SOVER=; \
-	if [ -n "$(LIBVERSION)$(LIBCOMPATVERSIONS)" ]; then \
-		prev=""; \
-		for v in `echo "$(LIBVERSION) $(LIBCOMPATVERSIONS)" | cut -d';' -f1`; do \
-			SHLIB_SOVER_NODOT=$$v; \
-			SHLIB_SOVER=.$$v; \
-			if [ -n "$$prev" ]; then \
-				SHLIB_COMPAT="$$SHLIB_COMPAT .$$prev"; \
-			fi; \
-			prev=$$v; \
-		done; \
-	fi
-
-LINK_APP=	\
-  ( $(SET_X);   \
-    LIBDEPS="$${LIBDEPS:-$(LIBDEPS)}"; \
-    LDCMD="$${LDCMD:-$(CC)}"; LDFLAGS="$${LDFLAGS:-$(CFLAGS)}"; \
-    LIBPATH=`for x in $$LIBDEPS; do echo $$x; done | sed -e 's/^ *-L//;t' -e d | uniq`; \
-    LIBPATH=`echo $$LIBPATH | sed -e 's/ /:/g'`; \
-    LD_LIBRARY_PATH=$$LIBPATH:$$LD_LIBRARY_PATH \
-    $${LDCMD} $${LDFLAGS} -o $${APPNAME:=$(APPNAME)} $(OBJECTS) $${LIBDEPS} )
-
-LINK_SO=	\
-  ( $(SET_X);   \
-    LIBDEPS="$${LIBDEPS:-$(LIBDEPS)}"; \
-    SHAREDCMD="$${SHAREDCMD:-$(CC)}"; \
-    SHAREDFLAGS="$${SHAREDFLAGS:-$(CFLAGS) $(SHARED_LDFLAGS)}"; \
-    LIBPATH=`for x in $$LIBDEPS; do echo $$x; done | sed -e 's/^ *-L//;t' -e d | uniq`; \
-    LIBPATH=`echo $$LIBPATH | sed -e 's/ /:/g'`; \
-    LD_LIBRARY_PATH=$$LIBPATH:$$LD_LIBRARY_PATH \
-    $${SHAREDCMD} $${SHAREDFLAGS} \
-	-o $$SHLIB$$SHLIB_SOVER$$SHLIB_SUFFIX \
-	$$ALLSYMSFLAGS $$SHOBJECTS $$NOALLSYMSFLAGS $$LIBDEPS \
-  ) && $(SYMLINK_SO)
-
-SYMLINK_SO=	\
-	if [ -n "$$INHIBIT_SYMLINKS" ]; then :; else \
-		prev=$$SHLIB$$SHLIB_SOVER$$SHLIB_SUFFIX; \
-		if [ -n "$$SHLIB_COMPAT" ]; then \
-			for x in $$SHLIB_COMPAT; do \
-				( $(SET_X); rm -f $$SHLIB$$x$$SHLIB_SUFFIX; \
-				  ln -s $$prev $$SHLIB$$x$$SHLIB_SUFFIX ); \
-				prev=$$SHLIB$$x$$SHLIB_SUFFIX; \
-			done; \
-		fi; \
-		if [ -n "$$SHLIB_SOVER" ]; then \
-			( $(SET_X); rm -f $$SHLIB$$SHLIB_SUFFIX; \
-			  ln -s $$prev $$SHLIB$$SHLIB_SUFFIX ); \
-		fi; \
-	fi
-
-LINK_SO_A=	SHOBJECTS="lib$(LIBNAME).a $(LIBEXTRAS)"; $(LINK_SO)
-LINK_SO_O=	SHOBJECTS="$(LIBEXTRAS)"; $(LINK_SO)
-
-LINK_SO_A_VIA_O=	\
-  SHOBJECTS=lib$(LIBNAME).o; \
-  ALL=$$ALLSYMSFLAGS; ALLSYMSFLAGS=; NOALLSYMSFLAGS=; \
-  ( $(SET_X); \
-    ld $(LDFLAGS) -r -o lib$(LIBNAME).o $$ALL lib$(LIBNAME).a $(LIBEXTRAS) ); \
-  $(LINK_SO) && rm -f lib$(LIBNAME).o
-
-LINK_SO_A_UNPACKED=	\
-  UNPACKDIR=link_tmp.$$$$; rm -rf $$UNPACKDIR; mkdir $$UNPACKDIR; \
-  (cd $$UNPACKDIR; ar x ../lib$(LIBNAME).a) && \
-  ([ -z "$(LIBEXTRAS)" ] || cp $(LIBEXTRAS) $$UNPACKDIR) && \
-  SHOBJECTS=$$UNPACKDIR/*.o; \
-  $(LINK_SO) && rm -rf $$UNPACKDIR
-
-DETECT_GNU_LD=($(CC) -Wl,-V /dev/null 2>&1 | grep '^GNU ld' )>/dev/null
-
-DO_GNU_SO=$(CALC_VERSIONS); \
-	SHLIB=lib$(LIBNAME).so; \
-	SHLIB_SUFFIX=; \
-	ALLSYMSFLAGS='-Wl,--whole-archive'; \
-	NOALLSYMSFLAGS='-Wl,--no-whole-archive'; \
-	SHAREDFLAGS="$(CFLAGS) $(SHARED_LDFLAGS) -shared -Wl,-Bsymbolic -Wl,-soname=$$SHLIB$$SHLIB_SOVER$$SHLIB_SUFFIX"
-
-DO_GNU_APP=LDFLAGS="$(CFLAGS) -Wl,-rpath,$(LIBRPATH)"
-
-#This is rather special.  It's a special target with which one can link
-#applications without bothering with any features that have anything to
-#do with shared libraries, for example when linking against static
-#libraries.  It's mostly here to avoid a lot of conditionals everywhere
-#else...
-link_app.:
-	$(LINK_APP)
-
-link_o.gnu:
-	@ $(DO_GNU_SO); $(LINK_SO_O)
-link_a.gnu:
-	@ $(DO_GNU_SO); $(LINK_SO_A)
-link_app.gnu:
-	@ $(DO_GNU_APP); $(LINK_APP)
-
-DO_BEOS_SO=	SHLIB=lib$(LIBNAME).so; \
-	SHLIB_SUFFIX=; \
-	ALLSYMSFLAGS='-Wl,--whole-archive'; \
-	NOALLSYMSFLAGS='-Wl,--no-whole-archive'; \
-	SHAREDFLAGS="$(CFLAGS) $(SHARED_LDFLAGS) -shared -Wl,-Bsymbolic -Wl,-soname=$$SHLIB$$SHLIB_SUFFIX"
-
-link_o.beos:
-	@ $(DO_BEOS_SO); $(LINK_SO_O)
-link_a.beos:
-	@ $(DO_BEOS_SO); $(LINK_SO_A)
-
-link_o.bsd:
-	@if $(DETECT_GNU_LD); then $(DO_GNU_SO); else \
-	$(CALC_VERSIONS); \
-	SHLIB=lib$(LIBNAME).so; \
-	SHLIB_SUFFIX=; \
-	LIBDEPS=" "; \
-	ALLSYMSFLAGS="-Wl,-Bforcearchive"; \
-	NOALLSYMSFLAGS=; \
-	SHAREDFLAGS="$(CFLAGS) $(SHARED_LDFLAGS) -shared -nostdlib"; \
-	fi; $(LINK_SO_O)
-link_a.bsd:
-	@if $(DETECT_GNU_LD); then $(DO_GNU_SO); else \
-	$(CALC_VERSIONS); \
-	SHLIB=lib$(LIBNAME).so; \
-	SHLIB_SUFFIX=; \
-	LIBDEPS=" "; \
-	ALLSYMSFLAGS="-Wl,-Bforcearchive"; \
-	NOALLSYMSFLAGS=; \
-	SHAREDFLAGS="$(CFLAGS) $(SHARED_LDFLAGS) -shared -nostdlib"; \
-	fi; $(LINK_SO_A)
-link_app.bsd:
-	@if $(DETECT_GNU_LD); then $(DO_GNU_APP); else \
-	LDFLAGS="$(CFLAGS) -Wl,-rpath,$(LIBPATH)"; \
-	fi; $(LINK_APP)
-
-# For Darwin AKA Mac OS/X (dyld)
-# Originally link_o.darwin produced .so, because it was hard-coded
-# in dso_dlfcn module. At later point dso_dlfcn switched to .dylib
-# extension in order to allow for run-time linking with vendor-
-# supplied shared libraries such as libz, so that link_o.darwin had
-# to be harmonized with it. This caused minor controversy, because
-# it was believed that dlopen can't be used to dynamically load
-# .dylib-s, only so called bundle modules (ones linked with -bundle
-# flag). The belief seems to be originating from pre-10.4 release,
-# where dlfcn functionality was emulated by dlcompat add-on. In
-# 10.4 dlopen was rewritten as native part of dyld and is documented
-# to be capable of loading both dynamic libraries and bundles. In
-# order to provide compatibility with pre-10.4 dlopen, modules are
-# linked with -bundle flag, which makes .dylib extension misleading.
-# It works, because dlopen is [and always was] extension-agnostic.
-# Alternative to this heuristic approach is to develop specific
-# MacOS X dso module relying on whichever "native" dyld interface.
-link_o.darwin:
-	@ $(CALC_VERSIONS); \
-	SHLIB=lib$(LIBNAME); \
-	SHLIB_SUFFIX=.dylib; \
-	ALLSYMSFLAGS='-all_load'; \
-	NOALLSYMSFLAGS=''; \
-	SHAREDFLAGS="$(CFLAGS) `echo $(SHARED_LDFLAGS) | sed s/dynamiclib/bundle/`"; \
-	if [ -n "$(LIBVERSION)" ]; then \
-		SHAREDFLAGS="$$SHAREDFLAGS -current_version $(LIBVERSION)"; \
-	fi; \
-	if [ -n "$$SHLIB_SOVER_NODOT" ]; then \
-		SHAREDFLAGS="$$SHAREDFLAGS -compatibility_version $$SHLIB_SOVER_NODOT"; \
-	fi; \
-	$(LINK_SO_O)
-link_a.darwin:
-	@ $(CALC_VERSIONS); \
-	SHLIB=lib$(LIBNAME); \
-	SHLIB_SUFFIX=.dylib; \
-	ALLSYMSFLAGS='-all_load'; \
-	NOALLSYMSFLAGS=''; \
-	SHAREDFLAGS="$(CFLAGS) $(SHARED_LDFLAGS)"; \
-	if [ -n "$(LIBVERSION)" ]; then \
-		SHAREDFLAGS="$$SHAREDFLAGS -current_version $(LIBVERSION)"; \
-	fi; \
-	if [ -n "$$SHLIB_SOVER_NODOT" ]; then \
-		SHAREDFLAGS="$$SHAREDFLAGS -compatibility_version $$SHLIB_SOVER_NODOT"; \
-	fi; \
-	SHAREDFLAGS="$$SHAREDFLAGS -install_name $(INSTALLTOP)/$(LIBDIR)/$$SHLIB$(SHLIB_EXT)"; \
-	$(LINK_SO_A)
-link_app.darwin:	# is there run-path on darwin?
-	$(LINK_APP)
-
-link_o.cygwin:
-	@ $(CALC_VERSIONS); \
-	INHIBIT_SYMLINKS=yes; \
-	SHLIB=cyg$(LIBNAME); \
-	base=-Wl,--enable-auto-image-base; \
-	deffile=; \
-	if expr $(PLATFORM) : 'mingw' > /dev/null; then \
-		SHLIB=$(LIBNAME)eay32; base=; \
-		if test -f $(LIBNAME)eay32.def; then \
-			deffile=$(LIBNAME)eay32.def; \
-		fi; \
-	fi; \
-	SHLIB_SUFFIX=.dll; \
-	LIBVERSION="$(LIBVERSION)"; \
-	SHLIB_SOVER=${LIBVERSION:+"-$(LIBVERSION)"}; \
-	ALLSYMSFLAGS='-Wl,--whole-archive'; \
-	NOALLSYMSFLAGS='-Wl,--no-whole-archive'; \
-	SHAREDFLAGS="$(CFLAGS) $(SHARED_LDFLAGS) -shared $$base $$deffile -Wl,-s,-Bsymbolic"; \
-	$(LINK_SO_O)
-#for mingw target if def-file is in use dll-name should match library-name
-link_a.cygwin:
-	@ $(CALC_VERSIONS); \
-	INHIBIT_SYMLINKS=yes; \
-	SHLIB=cyg$(LIBNAME); SHLIB_SOVER=-$(LIBVERSION); SHLIB_SUFFIX=.dll; \
-	dll_name=$$SHLIB$$SHLIB_SOVER$$SHLIB_SUFFIX; extras=; \
-	base=-Wl,--enable-auto-image-base; \
-	if expr $(PLATFORM) : 'mingw' > /dev/null; then \
-		case $(LIBNAME) in \
-			crypto) SHLIB=libeay;; \
-			ssl) SHLIB=ssleay;; \
-		esac; \
-		SHLIB_SOVER=32; \
-		extras="$(LIBNAME).def"; \
-		$(PERL) util/mkdef.pl 32 $$SHLIB > $$extras; \
-		base=; [ $(LIBNAME) = "crypto" ] && base=-Wl,--image-base,0x63000000; \
-	fi; \
-	dll_name=$$SHLIB$$SHLIB_SOVER$$SHLIB_SUFFIX; \
-	$(PERL) util/mkrc.pl $$dll_name | \
-		$(CROSS_COMPILE)windres -o rc.o; \
-	extras="$$extras rc.o"; \
-	ALLSYMSFLAGS='-Wl,--whole-archive'; \
-	NOALLSYMSFLAGS='-Wl,--no-whole-archive'; \
-	SHAREDFLAGS="$(CFLAGS) $(SHARED_LDFLAGS) -shared $$base -Wl,-s,-Bsymbolic -Wl,--out-implib,lib$(LIBNAME).dll.a $$extras"; \
-	[ -f apps/$$dll_name ] && rm apps/$$dll_name; \
-	[ -f test/$$dll_name ] && rm test/$$dll_name; \
-	$(LINK_SO_A) || exit 1; \
-	rm $$extras; \
-	cp -p $$dll_name apps/; \
-	cp -p $$dll_name test/
-link_app.cygwin:
-	@if expr "$(CFLAGS)" : '.*OPENSSL_USE_APPLINK' > /dev/null; then \
-		LIBDEPS="$(TOP)/crypto/applink.o $${LIBDEPS:-$(LIBDEPS)}"; \
-		export LIBDEPS; \
-	fi; \
-	$(LINK_APP)
-
-link_o.alpha-osf1:
-	@ if $(DETECT_GNU_LD); then \
-		$(DO_GNU_SO); \
-	else \
-		SHLIB=lib$(LIBNAME).so; \
-		SHLIB_SUFFIX=; \
-		SHLIB_HIST=`echo "$(LIBCOMPATVERSIONS)" | cut -d';' -f2 | sed -e 's/ */:/'`; \
-		if [ -n "$$SHLIB_HIST" ]; then \
-			SHLIB_HIST="$${SHLIB_HIST}:$(LIBVERSION)"; \
-		else \
-			SHLIB_HIST="$(LIBVERSION)"; \
-		fi; \
-		SHLIB_SOVER=; \
-		ALLSYMSFLAGS='-all'; \
-		NOALLSYMSFLAGS='-none'; \
-		SHAREDFLAGS="$(CFLAGS) $(SHARED_LDFLAGS) -shared -Wl,-B,symbolic"; \
-		if [ -n "$$SHLIB_HIST" ]; then \
-			SHAREDFLAGS="$$SHAREDFLAGS -set_version $$SHLIB_HIST"; \
-		fi; \
-	fi; \
-	$(LINK_SO_O)
-link_a.alpha-osf1:
-	@ if $(DETECT_GNU_LD); then \
-		$(DO_GNU_SO); \
-	else \
-		SHLIB=lib$(LIBNAME).so; \
-		SHLIB_SUFFIX=; \
-		SHLIB_HIST=`echo "$(LIBCOMPATVERSIONS)" | cut -d';' -f2 | sed -e 's/ */:/'`; \
-		if [ -n "$$SHLIB_HIST" ]; then \
-			SHLIB_HIST="$${SHLIB_HIST}:$(LIBVERSION)"; \
-		else \
-			SHLIB_HIST="$(LIBVERSION)"; \
-		fi; \
-		SHLIB_SOVER=; \
-		ALLSYMSFLAGS='-all'; \
-		NOALLSYMSFLAGS='-none'; \
-		SHAREDFLAGS="$(CFLAGS) $(SHARED_LDFLAGS) -shared -Wl,-B,symbolic"; \
-		if [ -n "$$SHLIB_HIST" ]; then \
-			SHAREDFLAGS="$$SHAREDFLAGS -set_version $$SHLIB_HIST"; \
-		fi; \
-	fi; \
-	$(LINK_SO_A)
-link_app.alpha-osf1:
-	@if $(DETECT_GNU_LD); then \
-		$(DO_GNU_APP); \
-	else \
-		LDFLAGS="$(CFLAGS) -rpath $(LIBRPATH)"; \
-	fi; \
-	$(LINK_APP)
-
-link_o.solaris:
-	@ if $(DETECT_GNU_LD); then \
-		$(DO_GNU_SO); \
-	else \
-		$(CALC_VERSIONS); \
-		MINUSZ='-z '; \
-		($(CC) -v 2>&1 | grep gcc) > /dev/null && MINUSZ='-Wl,-z,'; \
-		SHLIB=lib$(LIBNAME).so; \
-		SHLIB_SUFFIX=; \
-		ALLSYMSFLAGS="$${MINUSZ}allextract"; \
-		NOALLSYMSFLAGS="$${MINUSZ}defaultextract"; \
-		SHAREDFLAGS="$(CFLAGS) $(SHARED_LDFLAGS) -h $$SHLIB$$SHLIB_SOVER$$SHLIB_SUFFIX -Wl,-Bsymbolic"; \
-	fi; \
-	$(LINK_SO_O)
-link_a.solaris:
-	@ if $(DETECT_GNU_LD); then \
-		$(DO_GNU_SO); \
-	else \
-		$(CALC_VERSIONS); \
-		MINUSZ='-z '; \
-		($(CC) -v 2>&1 | grep gcc) > /dev/null && MINUSZ='-Wl,-z,'; \
-		SHLIB=lib$(LIBNAME).so; \
-		SHLIB_SUFFIX=;\
-		ALLSYMSFLAGS="$${MINUSZ}allextract"; \
-		NOALLSYMSFLAGS="$${MINUSZ}defaultextract"; \
-		SHAREDFLAGS="$(CFLAGS) $(SHARED_LDFLAGS) -h $$SHLIB$$SHLIB_SOVER$$SHLIB_SUFFIX -Wl,-Bsymbolic"; \
-	fi; \
-	$(LINK_SO_A)
-link_app.solaris:
-	@ if $(DETECT_GNU_LD); then \
-		$(DO_GNU_APP); \
-	else \
-		LDFLAGS="$(CFLAGS) -R $(LIBRPATH)"; \
-	fi; \
-	$(LINK_APP)
-
-# OpenServer 5 native compilers used
-link_o.svr3:
-	@ if $(DETECT_GNU_LD); then \
-		$(DO_GNU_SO); \
-	else \
-		$(CALC_VERSIONS); \
-		SHLIB=lib$(LIBNAME).so; \
-		SHLIB_SUFFIX=; \
-		ALLSYMSFLAGS=''; \
-		NOALLSYMSFLAGS=''; \
-		SHAREDFLAGS="$(CFLAGS) -G -h $$SHLIB$$SHLIB_SOVER$$SHLIB_SUFFIX"; \
-	fi; \
-	$(LINK_SO_O)
-link_a.svr3:
-	@ if $(DETECT_GNU_LD); then \
-		$(DO_GNU_SO); \
-	else \
-		$(CALC_VERSIONS); \
-		SHLIB=lib$(LIBNAME).so; \
-		SHLIB_SUFFIX=; \
-		ALLSYMSFLAGS=''; \
-		NOALLSYMSFLAGS=''; \
-		SHAREDFLAGS="$(CFLAGS) -G -h $$SHLIB$$SHLIB_SOVER$$SHLIB_SUFFIX"; \
-	fi; \
-	$(LINK_SO_A_UNPACKED)
-link_app.svr3:
-	@$(DETECT_GNU_LD) && $(DO_GNU_APP); \
-	$(LINK_APP)
-
-# UnixWare 7 and OpenUNIX 8 native compilers used
-link_o.svr5:
-	@ if $(DETECT_GNU_LD); then \
-		$(DO_GNU_SO); \
-	else \
-		$(CALC_VERSIONS); \
-		SHARE_FLAG='-G'; \
-		($(CC) -v 2>&1 | grep gcc) > /dev/null && SHARE_FLAG='-shared'; \
-		SHLIB=lib$(LIBNAME).so; \
-		SHLIB_SUFFIX=; \
-		ALLSYMSFLAGS=''; \
-		NOALLSYMSFLAGS=''; \
-		SHAREDFLAGS="$(CFLAGS) $${SHARE_FLAG} -h $$SHLIB$$SHLIB_SOVER$$SHLIB_SUFFIX"; \
-	fi; \
-	$(LINK_SO_O)
-link_a.svr5:
-	@ if $(DETECT_GNU_LD); then \
-		$(DO_GNU_SO); \
-	else \
-		$(CALC_VERSIONS); \
-		SHARE_FLAG='-G'; \
-		($(CC) -v 2>&1 | grep gcc) > /dev/null && SHARE_FLAG='-shared'; \
-		SHLIB=lib$(LIBNAME).so; \
-		SHLIB_SUFFIX=; \
-		ALLSYMSFLAGS=''; \
-		NOALLSYMSFLAGS=''; \
-		SHAREDFLAGS="$(CFLAGS) $${SHARE_FLAG} -h $$SHLIB$$SHLIB_SOVER$$SHLIB_SUFFIX"; \
-	fi; \
-	$(LINK_SO_A_UNPACKED)
-link_app.svr5:
-	@$(DETECT_GNU_LD) && $(DO_GNU_APP); \
-	$(LINK_APP)
-
-link_o.irix:
-	@ if $(DETECT_GNU_LD); then \
-		$(DO_GNU_SO); \
-	else \
-		$(CALC_VERSIONS); \
-		SHLIB=lib$(LIBNAME).so; \
-		SHLIB_SUFFIX=; \
-		MINUSWL=""; \
-		($(CC) -v 2>&1 | grep gcc) > /dev/null && MINUSWL="-Wl,"; \
-		ALLSYMSFLAGS="$${MINUSWL}-all"; \
-		NOALLSYMSFLAGS="$${MINUSWL}-none"; \
-		SHAREDFLAGS="$(CFLAGS) $(SHARED_LDFLAGS) -shared -Wl,-soname,$$SHLIB$$SHLIB_SOVER$$SHLIB_SUFFIX,-B,symbolic"; \
-	fi; \
-	$(LINK_SO_O)
-link_a.irix:
-	@ if $(DETECT_GNU_LD); then \
-		$(DO_GNU_SO); \
-	else \
-		$(CALC_VERSIONS); \
-		SHLIB=lib$(LIBNAME).so; \
-		SHLIB_SUFFIX=; \
-		MINUSWL=""; \
-		($(CC) -v 2>&1 | grep gcc) > /dev/null && MINUSWL="-Wl,"; \
-		ALLSYMSFLAGS="$${MINUSWL}-all"; \
-		NOALLSYMSFLAGS="$${MINUSWL}-none"; \
-		SHAREDFLAGS="$(CFLAGS) $(SHARED_LDFLAGS) -shared -Wl,-soname,$$SHLIB$$SHLIB_SOVER$$SHLIB_SUFFIX,-B,symbolic"; \
-	fi; \
-	$(LINK_SO_A)
-link_app.irix:
-	@LDFLAGS="$(CFLAGS) -Wl,-rpath,$(LIBRPATH)"; \
-	$(LINK_APP)
-
-# 32-bit PA-RISC HP-UX embeds the -L pathname of libs we link with, so
-# we compensate for it with +cdp ../: and +cdp ./:. Yes, these rewrite
-# rules imply that we can only link one level down in catalog structure,
-# but that's what takes place for the moment of this writing. +cdp option
-# was introduced in HP-UX 11.x and applies in 32-bit PA-RISC link
-# editor context only [it's simply ignored in other cases, which are all
-# ELFs by the way].
-#
-link_o.hpux:
-	@if $(DETECT_GNU_LD); then $(DO_GNU_SO); else \
-	$(CALC_VERSIONS); \
-	SHLIB=lib$(LIBNAME).sl; \
-	expr "$(CFLAGS)" : '.*DSO_DLFCN' > /dev/null && SHLIB=lib$(LIBNAME).so; \
-	SHLIB_SUFFIX=; \
-	ALLSYMSFLAGS='-Wl,-Fl'; \
-	NOALLSYMSFLAGS=''; \
-	expr $(PLATFORM) : 'hpux64' > /dev/null && ALLSYMSFLAGS='-Wl,+forceload'; \
-	SHAREDFLAGS="$(CFLAGS) $(SHARED_LDFLAGS) -Wl,-B,symbolic,+vnocompatwarnings,-z,+s,+h,$$SHLIB$$SHLIB_SOVER$$SHLIB_SUFFIX,+cdp,../:,+cdp,./:"; \
-	fi; \
-	rm -f $$SHLIB$$SHLIB_SOVER$$SHLIB_SUFFIX || :; \
-	$(LINK_SO_O) && chmod a=rx $$SHLIB$$SHLIB_SOVER$$SHLIB_SUFFIX
-link_a.hpux:
-	@if $(DETECT_GNU_LD); then $(DO_GNU_SO); else \
-	$(CALC_VERSIONS); \
-	SHLIB=lib$(LIBNAME).sl; \
-	expr $(PLATFORM) : '.*ia64' > /dev/null && SHLIB=lib$(LIBNAME).so; \
-	SHLIB_SUFFIX=; \
-	ALLSYMSFLAGS='-Wl,-Fl'; \
-	NOALLSYMSFLAGS=''; \
-	expr $(PLATFORM) : 'hpux64' > /dev/null && ALLSYMSFLAGS='-Wl,+forceload'; \
-	SHAREDFLAGS="$(CFLAGS) $(SHARED_LDFLAGS) -Wl,-B,symbolic,+vnocompatwarnings,-z,+s,+h,$$SHLIB$$SHLIB_SOVER$$SHLIB_SUFFIX,+cdp,../:,+cdp,./:"; \
-	fi; \
-	rm -f $$SHLIB$$SHLIB_SOVER$$SHLIB_SUFFIX || :; \
-	$(LINK_SO_A) && chmod a=rx $$SHLIB$$SHLIB_SOVER$$SHLIB_SUFFIX
-link_app.hpux:
-	@if $(DETECT_GNU_LD); then $(DO_GNU_APP); else \
-	LDFLAGS="$(CFLAGS) -Wl,+s,+cdp,../:,+cdp,./:,+b,$(LIBRPATH)"; \
-	fi; \
-	$(LINK_APP)
-
-link_o.aix:
-	@ $(CALC_VERSIONS); \
-	OBJECT_MODE=`expr "x$(SHARED_LDFLAGS)" : 'x\-[a-z]*\(64\)'` || :; \
-	OBJECT_MODE=$${OBJECT_MODE:-32}; export OBJECT_MODE; \
-	SHLIB=lib$(LIBNAME).so; \
-	SHLIB_SUFFIX=; \
-	ALLSYMSFLAGS=''; \
-	NOALLSYMSFLAGS=''; \
-	SHAREDFLAGS='$(CFLAGS) $(SHARED_LDFLAGS) -Wl,-bexpall,-bnolibpath,-bM:SRE'; \
-	$(LINK_SO_O);
-link_a.aix:
-	@ $(CALC_VERSIONS); \
-	OBJECT_MODE=`expr "x$(SHARED_LDFLAGS)" : 'x\-[a-z]*\(64\)'` || : ; \
-	OBJECT_MODE=$${OBJECT_MODE:-32}; export OBJECT_MODE; \
-	SHLIB=lib$(LIBNAME).so; \
-	SHLIB_SUFFIX=; \
-	ALLSYMSFLAGS='-bnogc'; \
-	NOALLSYMSFLAGS=''; \
-	SHAREDFLAGS='$(CFLAGS) $(SHARED_LDFLAGS) -Wl,-bexpall,-bnolibpath,-bM:SRE'; \
-	$(LINK_SO_A_VIA_O)
-link_app.aix:
-	LDFLAGS="$(CFLAGS) -Wl,-brtl,-blibpath:$(LIBRPATH):$${LIBPATH:-/usr/lib:/lib}"; \
-	$(LINK_APP)
-
-link_o.reliantunix:
-	@ $(CALC_VERSIONS); \
-	SHLIB=lib$(LIBNAME).so; \
-	SHLIB_SUFFIX=; \
-	ALLSYMSFLAGS=; \
-	NOALLSYMSFLAGS=''; \
-	SHAREDFLAGS='$(CFLAGS) -G'; \
-	$(LINK_SO_O)
-link_a.reliantunix:
-	@ $(CALC_VERSIONS); \
-	SHLIB=lib$(LIBNAME).so; \
-	SHLIB_SUFFIX=; \
-	ALLSYMSFLAGS=; \
-	NOALLSYMSFLAGS=''; \
-	SHAREDFLAGS='$(CFLAGS) -G'; \
-	$(LINK_SO_A_UNPACKED)
-link_app.reliantunix:
-	$(LINK_APP)
-
-# Targets to build symbolic links when needed
-symlink.gnu symlink.solaris symlink.svr3 symlink.svr5 symlink.irix \
-symlink.aix symlink.reliantunix:
-	@ $(CALC_VERSIONS); \
-	SHLIB=lib$(LIBNAME).so; \
-	$(SYMLINK_SO)
-symlink.darwin:
-	@ $(CALC_VERSIONS); \
-	SHLIB=lib$(LIBNAME); \
-	SHLIB_SUFFIX=.dylib; \
-	$(SYMLINK_SO)
-symlink.hpux:
-	@ $(CALC_VERSIONS); \
-	SHLIB=lib$(LIBNAME).sl; \
-	expr $(PLATFORM) : '.*ia64' > /dev/null && SHLIB=lib$(LIBNAME).so; \
-	$(SYMLINK_SO)
-# The following lines means those specific architectures do no symlinks
-symlink.cygwin symlink.alpha-osf1 symlink.tru64 symlink.tru64-rpath symlink.beos:
-
-# Compatibility targets
-link_o.bsd-gcc-shared link_o.linux-shared link_o.gnu-shared: link_o.gnu
-link_a.bsd-gcc-shared link_a.linux-shared link_a.gnu-shared: link_a.gnu
-link_app.bsd-gcc-shared link_app.linux-shared link_app.gnu-shared: link_app.gnu
-symlink.bsd-gcc-shared symlink.bsd-shared symlink.linux-shared symlink.gnu-shared: symlink.gnu
-link_o.bsd-shared: link_o.bsd
-link_a.bsd-shared: link_a.bsd
-link_app.bsd-shared: link_app.bsd
-link_o.darwin-shared: link_o.darwin
-link_a.darwin-shared: link_a.darwin
-link_app.darwin-shared: link_app.darwin
-symlink.darwin-shared: symlink.darwin
-link_o.cygwin-shared: link_o.cygwin
-link_a.cygwin-shared: link_a.cygwin
-link_app.cygwin-shared: link_app.cygwin
-symlink.cygwin-shared: symlink.cygwin
-link_o.alpha-osf1-shared: link_o.alpha-osf1
-link_a.alpha-osf1-shared: link_a.alpha-osf1
-link_app.alpha-osf1-shared: link_app.alpha-osf1
-symlink.alpha-osf1-shared: symlink.alpha-osf1
-link_o.tru64-shared: link_o.tru64
-link_a.tru64-shared: link_a.tru64
-link_app.tru64-shared: link_app.tru64
-symlink.tru64-shared: symlink.tru64
-link_o.tru64-shared-rpath: link_o.tru64-rpath
-link_a.tru64-shared-rpath: link_a.tru64-rpath
-link_app.tru64-shared-rpath: link_app.tru64-rpath
-symlink.tru64-shared-rpath: symlink.tru64-rpath
-link_o.solaris-shared: link_o.solaris
-link_a.solaris-shared: link_a.solaris
-link_app.solaris-shared: link_app.solaris
-symlink.solaris-shared: symlink.solaris
-link_o.svr3-shared: link_o.svr3
-link_a.svr3-shared: link_a.svr3
-link_app.svr3-shared: link_app.svr3
-symlink.svr3-shared: symlink.svr3
-link_o.svr5-shared: link_o.svr5
-link_a.svr5-shared: link_a.svr5
-link_app.svr5-shared: link_app.svr5
-symlink.svr5-shared: symlink.svr5
-link_o.irix-shared: link_o.irix
-link_a.irix-shared: link_a.irix
-link_app.irix-shared: link_app.irix
-symlink.irix-shared: symlink.irix
-link_o.hpux-shared: link_o.hpux
-link_a.hpux-shared: link_a.hpux
-link_app.hpux-shared: link_app.hpux
-symlink.hpux-shared: symlink.hpux
-link_o.aix-shared: link_o.aix
-link_a.aix-shared: link_a.aix
-link_app.aix-shared: link_app.aix
-symlink.aix-shared: symlink.aix
-link_o.reliantunix-shared: link_o.reliantunix
-link_a.reliantunix-shared: link_a.reliantunix
-link_app.reliantunix-shared: link_app.reliantunix
-symlink.reliantunix-shared: symlink.reliantunix
-link_o.beos-shared: link_o.beos
-link_a.beos-shared: link_a.beos
-link_app.beos-shared: link_app.gnu
-symlink.beos-shared: symlink.beos

NEWS

@@ -5,237 +5,6 @@
   This file gives a brief overview of the major changes between each OpenSSL
   release. For more details please read the CHANGES file.
 
-  Major changes between OpenSSL 1.0.0c and OpenSSL 1.0.0d:
-
-      o Fix for security issue CVE-2011-0014
-
-  Major changes between OpenSSL 1.0.0b and OpenSSL 1.0.0c:
-
-      o Fix for security issue CVE-2010-4180
-      o Fix for CVE-2010-4252
-      o Fix mishandling of absent EC point format extension.
-      o Fix various platform compilation issues.
-      o Corrected fix for security issue CVE-2010-3864.
-
-  Major changes between OpenSSL 1.0.0a and OpenSSL 1.0.0b:
-
-      o Fix for security issue CVE-2010-3864.
-      o Fix for CVE-2010-2939
-      o Fix WIN32 build system for GOST ENGINE.
-
-  Major changes between OpenSSL 1.0.0 and OpenSSL 1.0.0a:
-
-      o Fix for security issue CVE-2010-1633.
-      o GOST MAC and CFB fixes.
-
-  Major changes between OpenSSL 0.9.8n and OpenSSL 1.0.0:
-
-      o RFC3280 path validation: sufficient to process PKITS tests.
-      o Integrated support for PVK files and keyblobs.
-      o Change default private key format to PKCS#8.
-      o CMS support: able to process all examples in RFC4134
-      o Streaming ASN1 encode support for PKCS#7 and CMS.
-      o Multiple signer and signer add support for PKCS#7 and CMS.
-      o ASN1 printing support.
-      o Whirlpool hash algorithm added.
-      o RFC3161 time stamp support.
-      o New generalised public key API supporting ENGINE based algorithms.
-      o New generalised public key API utilities.
-      o New ENGINE supporting GOST algorithms.
-      o SSL/TLS GOST ciphersuite support.
-      o PKCS#7 and CMS GOST support.
-      o RFC4279 PSK ciphersuite support.
-      o Supported points format extension for ECC ciphersuites.
-      o ecdsa-with-SHA224/256/384/512 signature types.
-      o dsa-with-SHA224 and dsa-with-SHA256 signature types.
-      o Opaque PRF Input TLS extension support.
-      o Updated time routines to avoid OS limitations.
-
-  Major changes between OpenSSL 0.9.8q and OpenSSL 0.9.8r:
-
-      o Fix for security issue CVE-2011-0014
-
-  Major changes between OpenSSL 0.9.8p and OpenSSL 0.9.8q:
-
-      o Fix for security issue CVE-2010-4180
-      o Fix for CVE-2010-4252
-
-  Major changes between OpenSSL 0.9.8o and OpenSSL 0.9.8p:
-
-      o Fix for security issue CVE-2010-3864.
-
-  Major changes between OpenSSL 0.9.8n and OpenSSL 0.9.8o:
-
-      o Fix for security issue CVE-2010-0742.
-      o Various DTLS fixes.
-      o Recognise SHA2 certificates if only SSL algorithms added.
-      o Fix for no-rc4 compilation.
-      o Chil ENGINE unload workaround.
-
-  Major changes between OpenSSL 0.9.8m and OpenSSL 0.9.8n:
-
-      o CFB cipher definition fixes.
-      o Fix security issues CVE-2010-0740 and CVE-2010-0433.
-
-  Major changes between OpenSSL 0.9.8l and OpenSSL 0.9.8m:
-
-      o Cipher definition fixes.
-      o Workaround for slow RAND_poll() on some WIN32 versions.
-      o Remove MD2 from algorithm tables.
-      o SPKAC handling fixes.
-      o Support for RFC5746 TLS renegotiation extension.
-      o Compression memory leak fixed.
-      o Compression session resumption fixed.
-      o Ticket and SNI coexistence fixes.
-      o Many fixes to DTLS handling. 
-
-  Major changes between OpenSSL 0.9.8k and OpenSSL 0.9.8l:
-
-      o Temporary work around for CVE-2009-3555: disable renegotiation.
-
-  Major changes between OpenSSL 0.9.8j and OpenSSL 0.9.8k:
-
-      o Fix various build issues.
-      o Fix security issues (CVE-2009-0590, CVE-2009-0591, CVE-2009-0789)
-
-  Major changes between OpenSSL 0.9.8i and OpenSSL 0.9.8j:
-
-      o Fix security issue (CVE-2008-5077)
-      o Merge FIPS 140-2 branch code.
-
-  Major changes between OpenSSL 0.9.8g and OpenSSL 0.9.8h:
-
-      o CryptoAPI ENGINE support.
-      o Various precautionary measures.
-      o Fix for bugs affecting certificate request creation.
-      o Support for local machine keyset attribute in PKCS#12 files.
-
-  Major changes between OpenSSL 0.9.8f and OpenSSL 0.9.8g:
-
-      o Backport of CMS functionality to 0.9.8.
-      o Fixes for bugs introduced with 0.9.8f.
-
-  Major changes between OpenSSL 0.9.8e and OpenSSL 0.9.8f:
-
-      o Add gcc 4.2 support.
-      o Add support for AES and SSE2 assembly lanugauge optimization
-        for VC++ build.
-      o Support for RFC4507bis and server name extensions if explicitly 
-        selected at compile time.
-      o DTLS improvements.
-      o RFC4507bis support.
-      o TLS Extensions support.
-
-  Major changes between OpenSSL 0.9.8d and OpenSSL 0.9.8e:
-
-      o Various ciphersuite selection fixes.
-      o RFC3779 support.
-
-  Major changes between OpenSSL 0.9.8c and OpenSSL 0.9.8d:
-
-      o Introduce limits to prevent malicious key DoS  (CVE-2006-2940)
-      o Fix security issues (CVE-2006-2937, CVE-2006-3737, CVE-2006-4343)
-      o Changes to ciphersuite selection algorithm
-
-  Major changes between OpenSSL 0.9.8b and OpenSSL 0.9.8c:
-
-      o Fix Daniel Bleichenbacher forged signature attack, CVE-2006-4339
-      o New cipher Camellia
-
-  Major changes between OpenSSL 0.9.8a and OpenSSL 0.9.8b:
-
-      o Cipher string fixes.
-      o Fixes for VC++ 2005.
-      o Updated ECC cipher suite support.
-      o New functions EVP_CIPHER_CTX_new() and EVP_CIPHER_CTX_free().
-      o Zlib compression usage fixes.
-      o Built in dynamic engine compilation support on Win32.
-      o Fixes auto dynamic engine loading in Win32.
-
-  Major changes between OpenSSL 0.9.8 and OpenSSL 0.9.8a:
-
-      o Fix potential SSL 2.0 rollback, CVE-2005-2969
-      o Extended Windows CE support
-
-  Major changes between OpenSSL 0.9.7g and OpenSSL 0.9.8:
-
-      o Major work on the BIGNUM library for higher efficiency and to
-        make operations more streamlined and less contradictory.  This
-        is the result of a major audit of the BIGNUM library.
-      o Addition of BIGNUM functions for fields GF(2^m) and NIST
-        curves, to support the Elliptic Crypto functions.
-      o Major work on Elliptic Crypto; ECDH and ECDSA added, including
-        the use through EVP, X509 and ENGINE.
-      o New ASN.1 mini-compiler that's usable through the OpenSSL
-        configuration file.
-      o Added support for ASN.1 indefinite length constructed encoding.
-      o New PKCS#12 'medium level' API to manipulate PKCS#12 files.
-      o Complete rework of shared library construction and linking
-        programs with shared or static libraries, through a separate
-        Makefile.shared.
-      o Rework of the passing of parameters from one Makefile to another.
-      o Changed ENGINE framework to load dynamic engine modules
-        automatically from specifically given directories.
-      o New structure and ASN.1 functions for CertificatePair.
-      o Changed the ZLIB compression method to be stateful.
-      o Changed the key-generation and primality testing "progress"
-        mechanism to take a structure that contains the ticker
-        function and an argument.
-      o New engine module: GMP (performs private key exponentiation).
-      o New engine module: VIA PadLOck ACE extension in VIA C3
-        Nehemiah processors.
-      o Added support for IPv6 addresses in certificate extensions.
-        See RFC 1884, section 2.2.
-      o Added support for certificate policy mappings, policy
-        constraints and name constraints.
-      o Added support for multi-valued AVAs in the OpenSSL
-        configuration file.
-      o Added support for multiple certificates with the same subject
-        in the 'openssl ca' index file.
-      o Make it possible to create self-signed certificates using
-        'openssl ca -selfsign'.
-      o Make it possible to generate a serial number file with
-        'openssl ca -create_serial'.
-      o New binary search functions with extended functionality.
-      o New BUF functions.
-      o New STORE structure and library to provide an interface to all
-        sorts of data repositories.  Supports storage of public and
-        private keys, certificates, CRLs, numbers and arbitrary blobs.
-	This library is unfortunately unfinished and unused withing
-	OpenSSL.
-      o New control functions for the error stack.
-      o Changed the PKCS#7 library to support one-pass S/MIME
-        processing.
-      o Added the possibility to compile without old deprecated
-        functionality with the OPENSSL_NO_DEPRECATED macro or the
-        'no-deprecated' argument to the config and Configure scripts.
-      o Constification of all ASN.1 conversion functions, and other
-        affected functions.
-      o Improved platform support for PowerPC.
-      o New FIPS 180-2 algorithms (SHA-224, -256, -384 and -512).
-      o New X509_VERIFY_PARAM structure to support parametrisation
-        of X.509 path validation.
-      o Major overhaul of RC4 performance on Intel P4, IA-64 and
-        AMD64.
-      o Changed the Configure script to have some algorithms disabled
-        by default.  Those can be explicitely enabled with the new
-        argument form 'enable-xxx'.
-      o Change the default digest in 'openssl' commands from MD5 to
-        SHA-1.
-      o Added support for DTLS.
-      o New BIGNUM blinding.
-      o Added support for the RSA-PSS encryption scheme
-      o Added support for the RSA X.931 padding.
-      o Added support for BSD sockets on NetWare.
-      o Added support for files larger than 2GB.
-      o Added initial support for Win64.
-      o Added alternate pkg-config files.
-
-  Major changes between OpenSSL 0.9.7l and OpenSSL 0.9.7m:
-
-      o FIPS 1.1.1 module linking.
-      o Various ciphersuite selection fixes.
-
   Major changes between OpenSSL 0.9.7k and OpenSSL 0.9.7l:
 
       o Introduce limits to prevent malicious key DoS  (CVE-2006-2940)

Netware/build.bat

@@ -1,235 +0,0 @@
-@echo off
-
-rem ========================================================================
-rem   Batch file to automate building OpenSSL for NetWare.
-rem
-rem   usage:
-rem      build [target] [debug opts] [assembly opts] [configure opts]
-rem
-rem      target        - "netware-clib" - CLib NetWare build (WinSock Sockets)
-rem                    - "netware-clib-bsdsock" - CLib NetWare build (BSD Sockets)
-rem                    - "netware-libc" - LibC NetWare build (WinSock Sockets)
-rem                    - "netware-libc-bsdsock" - LibC NetWare build (BSD Sockets)
-rem 
-rem      debug opts    - "debug"  - build debug
-rem
-rem      assembly opts - "nw-mwasm" - use Metrowerks assembler
-rem                    - "nw-nasm"  - use NASM assembler
-rem                    - "no-asm"   - don't use assembly
-rem
-rem      configure opts- all unrecognized arguments are passed to the
-rem                       perl configure script
-rem
-rem   If no arguments are specified the default is to build non-debug with
-rem   no assembly.  NOTE: there is no default BLD_TARGET.
-rem
-
-
-
-rem   No assembly is the default - Uncomment section below to change
-rem   the assembler default
-set ASM_MODE=
-set ASSEMBLER=
-set NO_ASM=no-asm
-
-rem   Uncomment to default to the Metrowerks assembler
-rem set ASM_MODE=nw-mwasm
-rem set ASSEMBLER=Metrowerks
-rem set NO_ASM=
-
-rem   Uncomment to default to the NASM assembler
-rem set ASM_MODE=nw-nasm
-rem set ASSEMBLER=NASM
-rem set NO_ASM=
-
-rem   No default Bld target
-set BLD_TARGET=no_target
-rem set BLD_TARGET=netware-clib
-rem set BLD_TARGET=netware-libc
-
-
-rem   Default to build non-debug
-set DEBUG=
-                                    
-rem   Uncomment to default to debug build
-rem set DEBUG=debug
-
-
-set CONFIG_OPTS=
-set ARG_PROCESSED=NO
-
-
-rem   Process command line args
-:opts
-if "a%1" == "a" goto endopt
-if "%1" == "no-asm"   set NO_ASM=no-asm
-if "%1" == "no-asm"   set ARG_PROCESSED=YES
-if "%1" == "debug"    set DEBUG=debug
-if "%1" == "debug"    set ARG_PROCESSED=YES
-if "%1" == "nw-nasm"  set ASM_MODE=nw-nasm
-if "%1" == "nw-nasm"  set ASSEMBLER=NASM
-if "%1" == "nw-nasm"  set NO_ASM=
-if "%1" == "nw-nasm"  set ARG_PROCESSED=YES
-if "%1" == "nw-mwasm" set ASM_MODE=nw-mwasm
-if "%1" == "nw-mwasm" set ASSEMBLER=Metrowerks
-if "%1" == "nw-mwasm" set NO_ASM=
-if "%1" == "nw-mwasm" set ARG_PROCESSED=YES
-if "%1" == "netware-clib" set BLD_TARGET=netware-clib
-if "%1" == "netware-clib" set ARG_PROCESSED=YES
-if "%1" == "netware-clib-bsdsock" set BLD_TARGET=netware-clib-bsdsock
-if "%1" == "netware-clib-bsdsock" set ARG_PROCESSED=YES
-if "%1" == "netware-libc" set BLD_TARGET=netware-libc
-if "%1" == "netware-libc" set ARG_PROCESSED=YES
-if "%1" == "netware-libc-bsdsock" set BLD_TARGET=netware-libc-bsdsock
-if "%1" == "netware-libc-bsdsock" set ARG_PROCESSED=YES
-
-rem   If we didn't recognize the argument, consider it an option for config
-if "%ARG_PROCESSED%" == "NO" set CONFIG_OPTS=%CONFIG_OPTS% %1
-if "%ARG_PROCESSED%" == "YES" set ARG_PROCESSED=NO
-
-shift
-goto opts
-:endopt
-
-rem make sure a valid BLD_TARGET was specified
-if "%BLD_TARGET%" == "no_target" goto no_target
-
-rem build the nlm make file name which includes target and debug info
-set NLM_MAKE=
-if "%BLD_TARGET%" == "netware-clib" set NLM_MAKE=netware\nlm_clib
-if "%BLD_TARGET%" == "netware-clib-bsdsock" set NLM_MAKE=netware\nlm_clib_bsdsock
-if "%BLD_TARGET%" == "netware-libc" set NLM_MAKE=netware\nlm_libc
-if "%BLD_TARGET%" == "netware-libc-bsdsock" set NLM_MAKE=netware\nlm_libc_bsdsock
-if "%DEBUG%" == "" set NLM_MAKE=%NLM_MAKE%.mak
-if "%DEBUG%" == "debug" set NLM_MAKE=%NLM_MAKE%_dbg.mak
-
-if "%NO_ASM%" == "no-asm" set ASM_MODE=
-if "%NO_ASM%" == "no-asm" set ASSEMBLER=
-if "%NO_ASM%" == "no-asm" set CONFIG_OPTS=%CONFIG_OPTS% no-asm
-if "%NO_ASM%" == "no-asm" goto do_config
-
-
-rem ==================================================
-echo Generating x86 for %ASSEMBLER% assembler
-
-echo Bignum
-cd crypto\bn\asm
-rem perl x86.pl %ASM_MODE% > bn-nw.asm
-perl bn-586.pl %ASM_MODE% > bn-nw.asm
-perl co-586.pl %ASM_MODE% > co-nw.asm
-cd ..\..\..
-
-echo AES
-cd crypto\aes\asm
-perl aes-586.pl %ASM_MODE% > a-nw.asm
-cd ..\..\..
-
-echo DES
-cd crypto\des\asm
-perl des-586.pl %ASM_MODE% > d-nw.asm
-cd ..\..\..
-
-echo "crypt(3)"
-
-cd crypto\des\asm
-perl crypt586.pl %ASM_MODE% > y-nw.asm
-cd ..\..\..
-
-echo Blowfish
-
-cd crypto\bf\asm
-perl bf-586.pl %ASM_MODE% > b-nw.asm
-cd ..\..\..
-
-echo CAST5
-cd crypto\cast\asm
-perl cast-586.pl %ASM_MODE% > c-nw.asm
-cd ..\..\..
-
-echo RC4
-cd crypto\rc4\asm
-perl rc4-586.pl %ASM_MODE% > r4-nw.asm
-cd ..\..\..
-
-echo MD5
-cd crypto\md5\asm
-perl md5-586.pl %ASM_MODE% > m5-nw.asm
-cd ..\..\..
-
-echo SHA1
-cd crypto\sha\asm
-perl sha1-586.pl %ASM_MODE% > s1-nw.asm
-perl sha256-586.pl %ASM_MODE% > sha256-nw.asm
-perl sha512-586.pl %ASM_MODE% > sha512-nw.asm
-cd ..\..\..
-
-echo RIPEMD160
-cd crypto\ripemd\asm
-perl rmd-586.pl %ASM_MODE% > rm-nw.asm
-cd ..\..\..
-
-echo RC5\32
-cd crypto\rc5\asm
-perl rc5-586.pl %ASM_MODE% > r5-nw.asm
-cd ..\..\..
-
-echo WHIRLPOOL
-cd crypto\whrlpool\asm
-perl wp-mmx.pl %ASM_MODE% > wp-nw.asm
-cd ..\..\..
-
-echo CPUID
-cd crypto
-perl x86cpuid.pl %ASM_MODE% > x86cpuid-nw.asm
-cd ..\
-
-rem ===============================================================
-rem
-:do_config
-
-echo .
-echo configure options: %CONFIG_OPTS% %BLD_TARGET%
-echo .
-perl configure %CONFIG_OPTS% %BLD_TARGET%
-
-perl util\mkfiles.pl >MINFO
-
-echo .
-echo mk1mf.pl options: %DEBUG% %ASM_MODE% %CONFIG_OPTS% %BLD_TARGET%
-echo .
-perl util\mk1mf.pl %DEBUG% %ASM_MODE% %CONFIG_OPTS% %BLD_TARGET% >%NLM_MAKE%
-
-make -f %NLM_MAKE% vclean
-echo .
-echo The makefile "%NLM_MAKE%" has been created use your maketool to
-echo build (ex: make -f %NLM_MAKE%)
-goto end
-
-rem ===============================================================
-rem
-:no_target
-echo .
-echo .  No build target specified!!!
-echo .
-echo .  usage: build [target] [debug opts] [assembly opts] [configure opts]
-echo .
-echo .     target        - "netware-clib" - CLib NetWare build (WinSock Sockets)
-echo .                   - "netware-clib-bsdsock" - CLib NetWare build (BSD Sockets)
-echo .                   - "netware-libc" - LibC NetWare build (WinSock Sockets)
-echo .                   - "netware-libc-bsdsock" - LibC NetWare build (BSD Sockets)
-echo .
-echo .     debug opts    - "debug"  - build debug
-echo .
-echo .     assembly opts - "nw-mwasm" - use Metrowerks assembler
-echo .                     "nw-nasm"  - use NASM assembler
-echo .                     "no-asm"   - don't use assembly
-echo .
-echo .     configure opts- all unrecognized arguments are passed to the
-echo .                      perl configure script
-echo .
-echo .  If no debug or assembly opts are specified the default is to build
-echo .  non-debug without assembly
-echo .
-
-        
-:end        

Netware/cpy_tests.bat

@@ -1,113 +0,0 @@
-@echo off
-
-rem   Batch file to copy OpenSSL stuff to a NetWare server for testing
-
-rem   This batch file will create an "opensssl" directory at the root of the
-rem   specified NetWare drive and copy the required files to run the tests.
-rem   It should be run from inside the "openssl\netware" subdirectory.
-
-rem   Usage:
-rem      cpy_tests.bat <test subdirectory> <NetWare drive>
-rem          <test subdirectory> - out_nw.dbg | out_nw
-rem          <NetWare drive> - any mapped drive letter
-rem
-rem      example ( copy from debug build to m: dirve ):
-rem              cpy_tests.bat out_nw.dbg m:
-rem
-rem      CAUTION:  If a directory named OpenSSL exists on the target drive
-rem                it will be deleted first.
-
-
-if "%1" == "" goto usage
-if "%2" == "" goto usage
-
-rem   Assume running in \openssl directory unless cpy_tests.bat exists then
-rem   it must be the \openssl\netware directory
-set loc=.
-if exist cpy_tests.bat set loc=..
-
-rem   make sure the local build subdirectory specified is valid
-if not exist %loc%\%1\NUL goto invalid_dir
-
-rem   make sure target drive is valid
-if not exist %2\NUL goto invalid_drive
-
-rem   If an OpenSSL directory exists on the target drive, remove it
-if exist %2\openssl\NUL goto remove_openssl
-goto do_copy
-
-:remove_openssl
-echo .
-echo OpenSSL directory exists on %2 - it will be removed!
-pause
-rmdir %2\openssl /s /q
-
-:do_copy
-rem   make an "openssl" directory and others at the root of the NetWare drive
-mkdir %2\openssl
-mkdir %2\openssl\test_out
-mkdir %2\openssl\apps
-mkdir %2\openssl\certs
-mkdir %2\openssl\test
-
-
-rem   copy the test nlms
-copy %loc%\%1\*.nlm %2\openssl\
-
-rem   copy the test perl script
-copy %loc%\netware\do_tests.pl %2\openssl\
-
-rem   copy the certs directory stuff
-xcopy %loc%\certs\*.*         %2\openssl\certs\ /s
-
-rem   copy the test directory stuff
-copy %loc%\test\CAss.cnf      %2\openssl\test\
-copy %loc%\test\Uss.cnf       %2\openssl\test\
-copy %loc%\test\pkcs7.pem     %2\openssl\test\
-copy %loc%\test\pkcs7-1.pem   %2\openssl\test\
-copy %loc%\test\testcrl.pem   %2\openssl\test\
-copy %loc%\test\testp7.pem    %2\openssl\test\
-copy %loc%\test\testreq2.pem  %2\openssl\test\
-copy %loc%\test\testrsa.pem   %2\openssl\test\
-copy %loc%\test\testsid.pem   %2\openssl\test\
-copy %loc%\test\testx509.pem  %2\openssl\test\
-copy %loc%\test\v3-cert1.pem  %2\openssl\test\
-copy %loc%\test\v3-cert2.pem  %2\openssl\test\
-copy %loc%\crypto\evp\evptests.txt %2\openssl\test\
-
-rem   copy the apps directory stuff
-copy %loc%\apps\client.pem    %2\openssl\apps\
-copy %loc%\apps\server.pem    %2\openssl\apps\
-copy %loc%\apps\openssl.cnf   %2\openssl\apps\
-
-echo .
-echo Tests copied
-echo Run the test script at the console by typing:
-echo     "Perl \openssl\do_tests.pl"
-echo .
-echo Make sure the Search path includes the OpenSSL subdirectory
-
-goto end
-
-:invalid_dir
-echo.
-echo Invalid build directory specified: %1
-echo.
-goto usage
-
-:invalid_drive
-echo.
-echo Invalid drive: %2
-echo.
-goto usage
-
-:usage
-echo.
-echo usage: cpy_tests.bat [test subdirectory] [NetWare drive]
-echo     [test subdirectory] - out_nw_clib.dbg, out_nw_libc.dbg, etc. 
-echo     [NetWare drive]     - any mapped drive letter
-echo.
-echo example: cpy_test out_nw_clib.dbg M:
-echo  (copy from clib debug build area to M: drive)
-
-:end

Netware/do_tests.pl

@@ -1,624 +0,0 @@
-# perl script to run OpenSSL tests
-
-
-my $base_path      = "\\openssl";
-
-my $output_path    = "$base_path\\test_out";
-my $cert_path      = "$base_path\\certs";
-my $test_path      = "$base_path\\test";
-my $app_path       = "$base_path\\apps";
-
-my $tmp_cert       = "$output_path\\cert.tmp";
-my $OpenSSL_config = "$app_path\\openssl.cnf";
-my $log_file       = "$output_path\\tests.log";
-
-my $pause = 0;
-
-
-#  process the command line args to see if they wanted us to pause
-#  between executing each command
-foreach $i (@ARGV)
-{
-   if ($i =~ /^-p$/)
-   { $pause=1; }
-}
-
-
-
-main();
-
-
-############################################################################
-sub main()
-{
-   # delete all the output files in the output directory
-   unlink <$output_path\\*.*>;
-
-   # open the main log file
-   open(OUT, ">$log_file") || die "unable to open $log_file\n";
-
-   print( OUT "========================================================\n");
-   my $outFile = "$output_path\\version.out";
-   system("openssl2 version (CLIB_OPT)/>$outFile");
-   log_output("CHECKING FOR OPENSSL VERSION:", $outFile);
-
-   algorithm_tests();
-   encryption_tests();
-   evp_tests();
-   pem_tests();
-   verify_tests();
-   ca_tests();
-   ssl_tests();
-
-   close(OUT);
-
-   print("\nCompleted running tests.\n\n");
-   print("Check log file for errors: $log_file\n");
-}
-
-############################################################################
-sub algorithm_tests
-{
-   my $i;
-   my $outFile;
-   my @tests = ( rsa_test, destest, ideatest, bftest, bntest, shatest, sha1test,
-                 sha256t, sha512t, dsatest, md2test, md4test, md5test, mdc2test,
-                 rc2test, rc4test, rc5test, randtest, rmdtest, dhtest, ecdhtest,
-                 ecdsatest, ectest, exptest, casttest, hmactest );
-
-   print( "\nRUNNING CRYPTO ALGORITHM TESTS:\n\n");
-
-   print( OUT "\n========================================================\n");
-   print( OUT "CRYPTO ALGORITHM TESTS:\n\n");
-
-   foreach $i (@tests)
-   {
-      if (-e "$base_path\\$i.nlm")
-      {
-         $outFile = "$output_path\\$i.out";
-         system("$i (CLIB_OPT)/>$outFile");
-         log_desc("Test: $i\.nlm:");
-         log_output("", $outFile );
-      }
-      else
-      {
-         log_desc("Test: $i\.nlm: file not found");
-      }
-   }
-}
-
-############################################################################
-sub encryption_tests
-{
-   my $i;
-   my $outFile;
-   my @enc_tests = ( "enc", "rc4", "des-cfb", "des-ede-cfb", "des-ede3-cfb",
-                     "des-ofb", "des-ede-ofb", "des-ede3-ofb",
-                     "des-ecb", "des-ede", "des-ede3", "des-cbc",
-                     "des-ede-cbc", "des-ede3-cbc", "idea-ecb", "idea-cfb",
-                     "idea-ofb", "idea-cbc", "rc2-ecb", "rc2-cfb",
-                     "rc2-ofb", "rc2-cbc", "bf-ecb", "bf-cfb",
-                     "bf-ofb", "bf-cbc" );
-
-   my $input = "$base_path\\do_tests.pl";
-   my $cipher = "$output_path\\cipher.out";
-   my $clear = "$output_path\\clear.out";
-
-   print( "\nRUNNING ENCRYPTION & DECRYPTION TESTS:\n\n");
-
-   print( OUT "\n========================================================\n");
-   print( OUT "FILE ENCRYPTION & DECRYPTION TESTS:\n\n");
-
-   foreach $i (@enc_tests)
-   {
-      log_desc("Testing: $i");
-
-      # do encryption
-      $outFile = "$output_path\\enc.out";
-      system("openssl2 $i -e -bufsize 113 -k test -in $input -out $cipher (CLIB_OPT)/>$outFile" );
-      log_output("Encrypting: $input --> $cipher", $outFile);
-
-      # do decryption
-      $outFile = "$output_path\\dec.out";
-      system("openssl2 $i -d -bufsize 157 -k test -in $cipher -out $clear (CLIB_OPT)/>$outFile");
-      log_output("Decrypting: $cipher --> $clear", $outFile);
-
-      # compare files
-      $x = compare_files( $input, $clear, 1);
-      if ( $x == 0 )
-      {
-         print( "\rSUCCESS - files match: $input, $clear\n");
-         print( OUT "SUCCESS - files match: $input, $clear\n");
-      }
-      else
-      {
-         print( "\rERROR: files don't match\n");
-         print( OUT "ERROR: files don't match\n");
-      }
-
-      do_wait();
-
-      # Now do the same encryption but use Base64
-
-      # do encryption B64
-      $outFile = "$output_path\\B64enc.out";
-      system("openssl2 $i -a -e -bufsize 113 -k test -in $input -out $cipher (CLIB_OPT)/>$outFile");
-      log_output("Encrypting(B64): $cipher --> $clear", $outFile);
-
-      # do decryption B64
-      $outFile = "$output_path\\B64dec.out";
-      system("openssl2 $i -a -d -bufsize 157 -k test -in $cipher -out $clear (CLIB_OPT)/>$outFile");
-      log_output("Decrypting(B64): $cipher --> $clear", $outFile);
-
-      # compare files
-      $x = compare_files( $input, $clear, 1);
-      if ( $x == 0 )
-      {
-         print( "\rSUCCESS - files match: $input, $clear\n");
-         print( OUT "SUCCESS - files match: $input, $clear\n");
-      }
-      else
-      {
-         print( "\rERROR: files don't match\n");
-         print( OUT "ERROR: files don't match\n");
-      }
-
-      do_wait();
-
-   } # end foreach
-
-   # delete the temporary files
-   unlink($cipher);
-   unlink($clear);
-}
-
-
-############################################################################
-sub pem_tests
-{
-   my $i;
-   my $tmp_out;
-   my $outFile = "$output_path\\pem.out";
-
-   my %pem_tests = (
-         "crl"      => "testcrl.pem",
-          "pkcs7"   => "testp7.pem",
-          "req"     => "testreq2.pem",
-          "rsa"     => "testrsa.pem",
-          "x509"    => "testx509.pem",
-          "x509"    => "v3-cert1.pem",
-          "sess_id" => "testsid.pem"  );
-
-
-   print( "\nRUNNING PEM TESTS:\n\n");
-
-   print( OUT "\n========================================================\n");
-   print( OUT "PEM TESTS:\n\n");
-
-   foreach $i (keys(%pem_tests))
-   {
-      log_desc( "Testing: $i");
-
-      my $input = "$test_path\\$pem_tests{$i}";
-
-      $tmp_out = "$output_path\\$pem_tests{$i}";
-
-      if ($i ne "req" )
-      {
-         system("openssl2 $i -in $input -out $tmp_out (CLIB_OPT)/>$outFile");
-         log_output( "openssl2 $i -in $input -out $tmp_out", $outFile);
-      }
-      else
-      {
-         system("openssl2 $i -in $input -out $tmp_out -config $OpenSSL_config (CLIB_OPT)/>$outFile");
-         log_output( "openssl2 $i -in $input -out $tmp_out -config $OpenSSL_config", $outFile );
-      }
-
-      $x = compare_files( $input, $tmp_out);
-      if ( $x == 0 )
-      {
-         print( "\rSUCCESS - files match: $input, $tmp_out\n");
-         print( OUT "SUCCESS - files match: $input, $tmp_out\n");
-      }
-      else
-      {
-         print( "\rERROR: files don't match\n");
-         print( OUT "ERROR: files don't match\n");
-      }
-      do_wait();
-
-   } # end foreach
-}
-
-
-############################################################################
-sub verify_tests
-{
-   my $i;
-   my $outFile = "$output_path\\verify.out";
-
-   $cert_path =~ s/\\/\//g;
-   my @cert_files = <$cert_path/*.pem>;
-
-   print( "\nRUNNING VERIFY TESTS:\n\n");
-
-   print( OUT "\n========================================================\n");
-   print( OUT "VERIFY TESTS:\n\n");
-
-   make_tmp_cert_file();
-
-   foreach $i (@cert_files)
-   {
-      system("openssl2 verify -CAfile $tmp_cert $i (CLIB_OPT)/>$outFile");
-      log_desc("Verifying cert: $i");
-      log_output("openssl2 verify -CAfile $tmp_cert $i", $outFile);
-   }
-}
-
-
-############################################################################
-sub ssl_tests
-{
-   my $outFile = "$output_path\\ssl_tst.out";
-   my($CAcert) = "$output_path\\certCA.ss";
-   my($Ukey)   = "$output_path\\keyU.ss";
-   my($Ucert)  = "$output_path\\certU.ss";
-   my($ssltest)= "ssltest -key $Ukey -cert $Ucert -c_key $Ukey -c_cert $Ucert -CAfile $CAcert";
-
-   print( "\nRUNNING SSL TESTS:\n\n");
-
-   print( OUT "\n========================================================\n");
-   print( OUT "SSL TESTS:\n\n");
-
-   system("ssltest -ssl2 (CLIB_OPT)/>$outFile");
-   log_desc("Testing sslv2:");
-   log_output("ssltest -ssl2", $outFile);
-
-   system("$ssltest -ssl2 -server_auth (CLIB_OPT)/>$outFile");
-   log_desc("Testing sslv2 with server authentication:");
-   log_output("$ssltest -ssl2 -server_auth", $outFile);
-
-   system("$ssltest -ssl2 -client_auth (CLIB_OPT)/>$outFile");
-   log_desc("Testing sslv2 with client authentication:");
-   log_output("$ssltest -ssl2 -client_auth", $outFile);
-
-   system("$ssltest -ssl2 -server_auth -client_auth (CLIB_OPT)/>$outFile");
-   log_desc("Testing sslv2 with both client and server authentication:");
-   log_output("$ssltest -ssl2 -server_auth -client_auth", $outFile);
-
-   system("ssltest -ssl3 (CLIB_OPT)/>$outFile");
-   log_desc("Testing sslv3:");
-   log_output("ssltest -ssl3", $outFile);
-
-   system("$ssltest -ssl3 -server_auth (CLIB_OPT)/>$outFile");
-   log_desc("Testing sslv3 with server authentication:");
-   log_output("$ssltest -ssl3 -server_auth", $outFile);
-
-   system("$ssltest -ssl3 -client_auth (CLIB_OPT)/>$outFile");
-   log_desc("Testing sslv3 with client authentication:");
-   log_output("$ssltest -ssl3 -client_auth", $outFile);
-
-   system("$ssltest -ssl3 -server_auth -client_auth (CLIB_OPT)/>$outFile");
-   log_desc("Testing sslv3 with both client and server authentication:");
-   log_output("$ssltest -ssl3 -server_auth -client_auth", $outFile);
-
-   system("ssltest (CLIB_OPT)/>$outFile");
-   log_desc("Testing sslv2/sslv3:");
-   log_output("ssltest", $outFile);
-
-   system("$ssltest -server_auth (CLIB_OPT)/>$outFile");
-   log_desc("Testing sslv2/sslv3 with server authentication:");
-   log_output("$ssltest -server_auth", $outFile);
-
-   system("$ssltest -client_auth (CLIB_OPT)/>$outFile");
-   log_desc("Testing sslv2/sslv3 with client authentication:");
-   log_output("$ssltest -client_auth ", $outFile);
-
-   system("$ssltest -server_auth -client_auth (CLIB_OPT)/>$outFile");
-   log_desc("Testing sslv2/sslv3 with both client and server authentication:");
-   log_output("$ssltest -server_auth -client_auth", $outFile);
-
-   system("ssltest -bio_pair -ssl2 (CLIB_OPT)/>$outFile");
-   log_desc("Testing sslv2 via BIO pair:");
-   log_output("ssltest -bio_pair -ssl2", $outFile);
-
-   system("ssltest -bio_pair -dhe1024dsa -v (CLIB_OPT)/>$outFile");
-   log_desc("Testing sslv2/sslv3 with 1024 bit DHE via BIO pair:");
-   log_output("ssltest -bio_pair -dhe1024dsa -v", $outFile);
-
-   system("$ssltest -bio_pair -ssl2 -server_auth (CLIB_OPT)/>$outFile");
-   log_desc("Testing sslv2 with server authentication via BIO pair:");
-   log_output("$ssltest -bio_pair -ssl2 -server_auth", $outFile);
-
-   system("$ssltest -bio_pair -ssl2 -client_auth (CLIB_OPT)/>$outFile");
-   log_desc("Testing sslv2 with client authentication via BIO pair:");
-   log_output("$ssltest -bio_pair -ssl2 -client_auth", $outFile);
-
-   system("$ssltest -bio_pair -ssl2 -server_auth -client_auth (CLIB_OPT)/>$outFile");
-   log_desc("Testing sslv2 with both client and server authentication via BIO pair:");
-   log_output("$ssltest -bio_pair -ssl2 -server_auth -client_auth", $outFile);
-
-   system("ssltest -bio_pair -ssl3 (CLIB_OPT)/>$outFile");
-   log_desc("Testing sslv3 via BIO pair:");
-   log_output("ssltest -bio_pair -ssl3", $outFile);
-
-   system("$ssltest -bio_pair -ssl3 -server_auth (CLIB_OPT)/>$outFile");
-   log_desc("Testing sslv3 with server authentication via BIO pair:");
-   log_output("$ssltest -bio_pair -ssl3 -server_auth", $outFile);
-
-   system("$ssltest -bio_pair -ssl3 -client_auth (CLIB_OPT)/>$outFile");
-   log_desc("Testing sslv3 with client authentication  via BIO pair:");
-   log_output("$ssltest -bio_pair -ssl3 -client_auth", $outFile);
-
-   system("$ssltest -bio_pair -ssl3 -server_auth -client_auth (CLIB_OPT)/>$outFile");
-   log_desc("Testing sslv3 with both client and server authentication via BIO pair:");
-   log_output("$ssltest -bio_pair -ssl3 -server_auth -client_auth", $outFile);
-
-   system("ssltest -bio_pair (CLIB_OPT)/>$outFile");
-   log_desc("Testing sslv2/sslv3 via BIO pair:");
-   log_output("ssltest -bio_pair", $outFile);
-
-   system("$ssltest -bio_pair -server_auth (CLIB_OPT)/>$outFile");
-   log_desc("Testing sslv2/sslv3 with server authentication via BIO pair:");
-   log_output("$ssltest -bio_pair -server_auth", $outFile);
-
-   system("$ssltest -bio_pair -client_auth (CLIB_OPT)/>$outFile");
-   log_desc("Testing sslv2/sslv3 with client authentication via BIO pair:");
-   log_output("$ssltest -bio_pair -client_auth", $outFile);
-
-   system("$ssltest -bio_pair -server_auth -client_auth (CLIB_OPT)/>$outFile");
-   log_desc("Testing sslv2/sslv3 with both client and server authentication via BIO pair:");
-   log_output("$ssltest -bio_pair -server_auth -client_auth", $outFile);
-}
-
-
-############################################################################
-sub ca_tests
-{
-   my $outFile = "$output_path\\ca_tst.out";
-
-   my($CAkey)     = "$output_path\\keyCA.ss";
-   my($CAcert)    = "$output_path\\certCA.ss";
-   my($CAserial)  = "$output_path\\certCA.srl";
-   my($CAreq)     = "$output_path\\reqCA.ss";
-   my($CAreq2)    = "$output_path\\req2CA.ss";
-
-   my($CAconf)    = "$test_path\\CAss.cnf";
-
-   my($Uconf)     = "$test_path\\Uss.cnf";
-
-   my($Ukey)      = "$output_path\\keyU.ss";
-   my($Ureq)      = "$output_path\\reqU.ss";
-   my($Ucert)     = "$output_path\\certU.ss";
-
-   print( "\nRUNNING CA TESTS:\n\n");
-
-   print( OUT "\n========================================================\n");
-   print( OUT "CA TESTS:\n");
-
-   system("openssl2 req -config $CAconf -out $CAreq -keyout $CAkey -new (CLIB_OPT)/>$outFile");
-   log_desc("Make a certificate request using req:");
-   log_output("openssl2 req -config $CAconf -out $CAreq -keyout $CAkey -new", $outFile);
-
-   system("openssl2 x509 -CAcreateserial -in $CAreq -days 30 -req -out $CAcert -signkey $CAkey (CLIB_OPT)/>$outFile");
-   log_desc("Convert the certificate request into a self signed certificate using x509:");
-   log_output("openssl2 x509 -CAcreateserial -in $CAreq -days 30 -req -out $CAcert -signkey $CAkey", $outFile);
-
-   system("openssl2 x509 -in $CAcert -x509toreq -signkey $CAkey -out $CAreq2 (CLIB_OPT)/>$outFile");
-   log_desc("Convert a certificate into a certificate request using 'x509':");
-   log_output("openssl2 x509 -in $CAcert -x509toreq -signkey $CAkey -out $CAreq2", $outFile);
-
-   system("openssl2 req -config $OpenSSL_config -verify -in $CAreq -noout (CLIB_OPT)/>$outFile");
-   log_output("openssl2 req -config $OpenSSL_config -verify -in $CAreq -noout", $outFile);
-
-   system("openssl2 req -config $OpenSSL_config -verify -in $CAreq2 -noout (CLIB_OPT)/>$outFile");
-   log_output( "openssl2 req -config $OpenSSL_config -verify -in $CAreq2 -noout", $outFile);
-
-   system("openssl2 verify -CAfile $CAcert $CAcert (CLIB_OPT)/>$outFile");
-   log_output("openssl2 verify -CAfile $CAcert $CAcert", $outFile);
-
-   system("openssl2 req -config $Uconf -out $Ureq -keyout $Ukey -new (CLIB_OPT)/>$outFile");
-   log_desc("Make another certificate request using req:");
-   log_output("openssl2 req -config $Uconf -out $Ureq -keyout $Ukey -new", $outFile);
-
-   system("openssl2 x509 -CAcreateserial -in $Ureq -days 30 -req -out $Ucert -CA $CAcert -CAkey $CAkey -CAserial $CAserial (CLIB_OPT)/>$outFile");
-   log_desc("Sign certificate request with the just created CA via x509:");
-   log_output("openssl2 x509 -CAcreateserial -in $Ureq -days 30 -req -out $Ucert -CA $CAcert -CAkey $CAkey -CAserial $CAserial", $outFile);
-
-   system("openssl2 verify -CAfile $CAcert $Ucert (CLIB_OPT)/>$outFile");
-   log_output("openssl2 verify -CAfile $CAcert $Ucert", $outFile);
-
-   system("openssl2 x509 -subject -issuer -startdate -enddate -noout -in $Ucert (CLIB_OPT)/>$outFile");
-   log_desc("Certificate details");
-   log_output("openssl2 x509 -subject -issuer -startdate -enddate -noout -in $Ucert", $outFile);
-
-   print(OUT "--\n");
-   print(OUT "The generated CA certificate is $CAcert\n");
-   print(OUT "The generated CA private key is $CAkey\n");
-   print(OUT "The current CA signing serial number is in $CAserial\n");
-
-   print(OUT "The generated user certificate is $Ucert\n");
-   print(OUT "The generated user private key is $Ukey\n");
-   print(OUT "--\n");
-}
-
-############################################################################
-sub evp_tests
-{
-   my $i = 'evp_test';
-
-   print( "\nRUNNING EVP TESTS:\n\n");
-
-   print( OUT "\n========================================================\n");
-   print( OUT "EVP TESTS:\n\n");
-
-   if (-e "$base_path\\$i.nlm")
-   {
-       my $outFile = "$output_path\\$i.out";
-       system("$i $test_path\\evptests.txt (CLIB_OPT)/>$outFile");
-       log_desc("Test: $i\.nlm:");
-       log_output("", $outFile );
-   }
-   else
-   {
-       log_desc("Test: $i\.nlm: file not found");
-   }
-}
-
-############################################################################
-sub log_output( $ $ )
-{
-   my( $desc, $file ) = @_;
-   my($error) = 0;
-   my($key);
-   my($msg);
-
-   if ($desc)
-   {
-      print("\r$desc\n");
-      print(OUT "$desc\n");
-   }
-
-      # loop waiting for test program to complete
-   while ( stat($file) == 0)
-      { print(". "); sleep(1); }
-
-
-      # copy test output to log file
-   open(IN, "<$file");
-   while (<IN>)
-   {
-      print(OUT $_);
-      if ( $_ =~ /ERROR/ )
-      {
-         $error = 1;
-      }
-   }
-      # close and delete the temporary test output file
-   close(IN);
-   unlink($file);
-
-   if ( $error == 0 )
-   {
-      $msg = "Test Succeeded";
-   }
-   else
-   {
-      $msg = "Test Failed";
-   }
-
-   print(OUT "$msg\n");
-
-   if ($pause)
-   {
-      print("$msg - press ENTER to continue...");
-      $key = getc;
-      print("\n");
-   }
-
-      # Several of the testing scripts run a loop loading the
-      # same NLM with different options.
-      # On slow NetWare machines there appears to be some delay in the
-      # OS actually unloading the test nlms and the OS complains about.
-      # the NLM already being loaded.  This additional pause is to
-      # to help provide a little more time for unloading before trying to
-      # load again.
-   sleep(1);
-}
-
-
-############################################################################
-sub log_desc( $ )
-{
-   my( $desc ) = @_;
-
-   print("\n");
-   print("$desc\n");
-
-   print(OUT "\n");
-   print(OUT "$desc\n");
-   print(OUT "======================================\n");
-}
-
-############################################################################
-sub compare_files( $ $ $ )
-{
-   my( $file1, $file2, $binary ) = @_;
-   my( $n1, $n2, $b1, $b2 );
-   my($ret) = 1;
-
-   open(IN0, $file1) || die "\nunable to open $file1\n";
-   open(IN1, $file2) || die "\nunable to open $file2\n";
-
-  if ($binary)
-  {
-      binmode IN0;
-      binmode IN1;
-  }
-
-   for (;;)
-   {
-      $n1 = read(IN0, $b1, 512);
-      $n2 = read(IN1, $b2, 512);
-
-      if ($n1 != $n2) {last;}
-      if ($b1 != $b2) {last;}
-
-      if ($n1 == 0)
-      {
-         $ret = 0;
-         last;
-      }
-   }
-   close(IN0);
-   close(IN1);
-   return($ret);
-}
-
-############################################################################
-sub do_wait()
-{
-   my($key);
-
-   if ($pause)
-   {
-      print("Press ENTER to continue...");
-      $key = getc;
-      print("\n");
-   }
-}
-
-
-############################################################################
-sub make_tmp_cert_file()
-{
-   my @cert_files = <$cert_path/*.pem>;
-
-      # delete the file if it already exists
-   unlink($tmp_cert);
-
-   open( TMP_CERT, ">$tmp_cert") || die "\nunable to open $tmp_cert\n";
-
-   print("building temporary cert file\n");
-
-   # create a temporary cert file that contains all the certs
-   foreach $i (@cert_files)
-   {
-      open( IN_CERT, $i ) || die "\nunable to open $i\n";
-
-      for(;;)
-      {
-         $n = sysread(IN_CERT, $data, 1024);
-
-         if ($n == 0)
-         {
-            close(IN_CERT);
-            last;
-         };
-
-         syswrite(TMP_CERT, $data, $n);
-      }
-   }
-
-   close( TMP_CERT );
-}

Netware/globals.txt

@@ -1,254 +0,0 @@
-An initial review of the OpenSSL code was done to determine how many 
-global variables where present.  The idea was to determine the amount of 
-work required to pull the globals into an instance data structure in 
-order to build a Library NLM for NetWare.  This file contains the results 
-of the review.  Each file is listed along with the globals in the file.  
-The initial review was done very quickly so this list is probably
-not a comprehensive list.
-
-
-cryptlib.c
-===========================================
-
-static STACK *app_locks=NULL;
-
-static STACK_OF(CRYPTO_dynlock) *dyn_locks=NULL;
-
-static void (MS_FAR *locking_callback)(int mode,int type,
-   const char *file,int line)=NULL;
-static int (MS_FAR *add_lock_callback)(int *pointer,int amount,
-   int type,const char *file,int line)=NULL;
-static unsigned long (MS_FAR *id_callback)(void)=NULL;
-static struct CRYPTO_dynlock_value *(MS_FAR *dynlock_create_callback)
-   (const char *file,int line)=NULL;
-static void (MS_FAR *dynlock_lock_callback)(int mode,
-   struct CRYPTO_dynlock_value *l, const char *file,int line)=NULL;
-static void (MS_FAR *dynlock_destroy_callback)(struct CRYPTO_dynlock_value *l,
-   const char *file,int line)=NULL;
-
-
-mem.c
-===========================================
-static int allow_customize = 1;      /* we provide flexible functions for */
-static int allow_customize_debug = 1;/* exchanging memory-related functions at
-
-/* may be changed as long as `allow_customize' is set */
-static void *(*malloc_locked_func)(size_t)  = malloc;
-static void (*free_locked_func)(void *)     = free;
-static void *(*malloc_func)(size_t)         = malloc;
-static void *(*realloc_func)(void *, size_t)= realloc;
-static void (*free_func)(void *)            = free;
-
-/* use default functions from mem_dbg.c */
-static void (*malloc_debug_func)(void *,int,const char *,int,int)
-   = CRYPTO_dbg_malloc;
-static void (*realloc_debug_func)(void *,void *,int,const char *,int,int)
-   = CRYPTO_dbg_realloc;
-static void (*free_debug_func)(void *,int) = CRYPTO_dbg_free;
-static void (*set_debug_options_func)(long) = CRYPTO_dbg_set_options;
-static long (*get_debug_options_func)(void) = CRYPTO_dbg_get_options;
-
-
-mem_dbg.c
-===========================================
-static int mh_mode=CRYPTO_MEM_CHECK_OFF;
-static unsigned long order = 0; /* number of memory requests */
-static LHASH *mh=NULL; /* hash-table of memory requests (address as key) */
-
-static LHASH *amih=NULL; /* hash-table with those app_mem_info_st's */
-static long options =             /* extra information to be recorded */
-static unsigned long disabling_thread = 0;
-
-
-err.c
-===========================================
-static LHASH *error_hash=NULL;
-static LHASH *thread_hash=NULL;
-
-several files have routines with static "init" to track if error strings
-   have been loaded ( may not want seperate error strings for each process )
-   The "init" variable can't be left "global" because the error has is a ptr
-   that is malloc'ed.  The malloc'ed error has is dependant on the "init"
-   vars.
-
-   files:
-      pem_err.c
-      cpt_err.c
-      pk12err.c
-      asn1_err.c
-      bio_err.c
-      bn_err.c
-      buf_err.c
-      comp_err.c
-      conf_err.c
-      cpt_err.c
-      dh_err.c
-      dsa_err.c
-      dso_err.c
-      evp_err.c
-      obj_err.c
-      pkcs7err.c
-      rand_err.c
-      rsa_err.c
-      rsar_err.c
-      ssl_err.c
-      x509_err.c
-      v3err.c
-		err.c
-
-These file have similar "init" globals but they are for other stuff not
-error strings:
-
-		bn_lib.c
-		ecc_enc.c
-		s23_clnt.c
-		s23_meth.c
-		s23_srvr.c
-		s2_clnt.c
-		s2_lib.c
-		s2_meth.c
-		s2_srvr.c
-		s3_clnt.c
-		s3_lib.c
-		s3_srvr.c
-		t1_clnt.c
-		t1_meth.c
-		t1_srvr.c
-
-rand_lib.c
-===========================================
-static RAND_METHOD *rand_meth= &rand_ssleay_meth;
-
-md_rand.c
-===========================================
-static int state_num=0,state_index=0;
-static unsigned char state[STATE_SIZE+MD_DIGEST_LENGTH];
-static unsigned char md[MD_DIGEST_LENGTH];
-static long md_count[2]={0,0};
-static double entropy=0;
-static int initialized=0;
-
-/* This should be set to 1 only when ssleay_rand_add() is called inside
-   an already locked state, so it doesn't try to lock and thereby cause
-   a hang.  And it should always be reset back to 0 before unlocking. */
-static int add_do_not_lock=0;
-
-obj_dat.c
-============================================
-static int new_nid=NUM_NID;
-static LHASH *added=NULL;
-
-b_sock.c
-===========================================
-static unsigned long BIO_ghbn_hits=0L;
-static unsigned long BIO_ghbn_miss=0L;
-static struct ghbn_cache_st
-   {
-   char name[129];
-   struct hostent *ent;
-   unsigned long order;
-   } ghbn_cache[GHBN_NUM];
-
-static int wsa_init_done=0;
-
-
-bio_lib.c
-===========================================
-static STACK_OF(CRYPTO_EX_DATA_FUNCS) *bio_meth=NULL;
-static int bio_meth_num=0;
-
-
-bn_lib.c
-========================================
-static int bn_limit_bits=0;
-static int bn_limit_num=8;        /* (1<<bn_limit_bits) */
-static int bn_limit_bits_low=0;
-static int bn_limit_num_low=8;    /* (1<<bn_limit_bits_low) */
-static int bn_limit_bits_high=0;
-static int bn_limit_num_high=8;   /* (1<<bn_limit_bits_high) */
-static int bn_limit_bits_mont=0;
-static int bn_limit_num_mont=8;   /* (1<<bn_limit_bits_mont) */
-
-conf_lib.c
-========================================
-static CONF_METHOD *default_CONF_method=NULL;
-
-dh_lib.c
-========================================
-static DH_METHOD *default_DH_method;
-static int dh_meth_num = 0;
-static STACK_OF(CRYPTO_EX_DATA_FUNCS) *dh_meth = NULL;
-
-dsa_lib.c
-========================================
-static DSA_METHOD *default_DSA_method;
-static int dsa_meth_num = 0;
-static STACK_OF(CRYPTO_EX_DATA_FUNCS) *dsa_meth = NULL;
-
-dso_lib.c
-========================================
-static DSO_METHOD *default_DSO_meth = NULL;
-
-rsa_lib.c
-========================================
-static RSA_METHOD *default_RSA_meth=NULL;
-static int rsa_meth_num=0;
-static STACK_OF(CRYPTO_EX_DATA_FUNCS) *rsa_meth=NULL;
-
-x509_trs.c
-=======================================
-static int (*default_trust)(int id, X509 *x, int flags) = obj_trust;
-static STACK_OF(X509_TRUST) *trtable = NULL;
-
-x509_req.c
-=======================================
-static int *ext_nids = ext_nid_list;
-
-o_names.c
-======================================
-static LHASH *names_lh=NULL;
-static STACK_OF(NAME_FUNCS) *name_funcs_stack;
-static int free_type;
-static int names_type_num=OBJ_NAME_TYPE_NUM;
-
-
-th-lock.c - NEED to add support for locking for NetWare
-==============================================
-static long *lock_count;
-(other platform specific globals)
-
-x_x509.c
-==============================================
-static int x509_meth_num = 0;
-static STACK_OF(CRYPTO_EX_DATA_FUNCS) *x509_meth = NULL;
-
-
-evp_pbe.c
-============================================
-static STACK *pbe_algs;
-
-evp_key.c
-============================================
-static char prompt_string[80];
-
-ssl_ciph.c
-============================================
-static STACK_OF(SSL_COMP) *ssl_comp_methods=NULL;
-
-ssl_lib.c
-=============================================
-static STACK_OF(CRYPTO_EX_DATA_FUNCS) *ssl_meth=NULL;
-static STACK_OF(CRYPTO_EX_DATA_FUNCS) *ssl_ctx_meth=NULL;
-static int ssl_meth_num=0;
-static int ssl_ctx_meth_num=0;
-
-ssl_sess.c
-=============================================
-static int ssl_session_num=0;
-static STACK_OF(CRYPTO_EX_DATA_FUNCS) *ssl_session_meth=NULL;
-
-x509_vfy.c
-============================================
-static STACK_OF(CRYPTO_EX_DATA_FUNCS) *x509_store_ctx_method=NULL;
-static int x509_store_ctx_num=0;
-

Netware/readme.txt

@@ -1,19 +0,0 @@
-
-Contents of the openssl\netware directory
-==========================================
-
-Regular files:
-
-readme.txt     - this file
-do_tests.pl    - perl script used to run the OpenSSL tests on NetWare
-cpy_tests.bat  - batch to to copy test stuff to NetWare server
-build.bat      - batch file to help with builds
-set_env.bat    - batch file to help setup build environments
-globals.txt    - results of initial code review to identify OpenSSL global variables
-
-
-The following files are generated by the various scripts.  They are
-recreated each time and it is okay to delete them.
-
-*.def - command files used by Metrowerks linker
-*.mak - make files generated by mk1mf.pl

Netware/set_env.bat

@@ -1,112 +0,0 @@
-@echo off
-
-rem ========================================================================
-rem   Batch file to assist in setting up the necessary enviroment for
-rem   building OpenSSL for NetWare.
-rem
-rem   usage:
-rem      set_env [target]
-rem
-rem      target      - "netware-clib" - Clib build
-rem                  - "netware-libc" - LibC build
-rem
-rem
-
-if "a%1" == "a" goto usage
-               
-set LIBC_BUILD=
-set CLIB_BUILD=
-set GNUC=
-
-if "%1" == "netware-clib" set CLIB_BUILD=Y
-if "%1" == "netware-clib" set LIBC_BUILD=
-
-if "%1" == "netware-libc" set LIBC_BUILD=Y
-if "%1" == "netware-libc" set CLIB_BUILD=
-
-if "%2" == "gnuc" set GNUC=Y
-if "%2" == "codewarrior" set GNUC=
-
-rem   Location of tools (compiler, linker, etc)
-if "%NDKBASE%" == "" set NDKBASE=c:\Novell
-
-rem   If Perl for Win32 is not already in your path, add it here
-set PERL_PATH=
-
-rem   Define path to the Metrowerks command line tools
-rem   or GNU Crosscompiler gcc / nlmconv
-rem   ( compiler, assembler, linker)
-if "%GNUC%" == "Y" set COMPILER_PATH=c:\usr\i586-netware\bin;c:\usr\bin
-if "%GNUC%" == "" set COMPILER_PATH=c:\prg\cwcmdl40
-
-rem   If using gnu make define path to utility
-rem set GNU_MAKE_PATH=%NDKBASE%\gnu
-set GNU_MAKE_PATH=c:\prg\tools
-
-rem   If using ms nmake define path to nmake
-rem set MS_NMAKE_PATH=%NDKBASE%\msvc\600\bin
-
-rem   If using NASM assembler define path
-rem set NASM_PATH=%NDKBASE%\nasm
-set NASM_PATH=c:\prg\tools
-
-rem   Update path to include tool paths
-set path=%path%;%COMPILER_PATH%
-if not "%GNU_MAKE_PATH%" == "" set path=%path%;%GNU_MAKE_PATH%
-if not "%MS_NMAKE_PATH%" == "" set path=%path%;%MS_NMAKE_PATH%
-if not "%NASM_PATH%"     == "" set path=%path%;%NASM_PATH%
-if not "%PERL_PATH%"     == "" set path=%path%;%PERL_PATH%
-
-rem   Set INCLUDES to location of Novell NDK includes
-if "%LIBC_BUILD%" == "Y" set INCLUDE=%NDKBASE%\ndk\libc\include;%NDKBASE%\ndk\libc\include\winsock
-if "%CLIB_BUILD%" == "Y" set INCLUDE=%NDKBASE%\ndk\nwsdk\include\nlm;%NDKBASE%\ws295sdk\include
-
-rem   Set Imports to location of Novell NDK import files
-if "%LIBC_BUILD%" == "Y" set IMPORTS=%NDKBASE%\ndk\libc\imports
-if "%CLIB_BUILD%" == "Y" set IMPORTS=%NDKBASE%\ndk\nwsdk\imports
-
-rem   Set PRELUDE to the absolute path of the prelude object to link with in
-rem   the Metrowerks NetWare PDK - NOTE: for Clib builds "clibpre.o" is 
-rem   recommended, for LibC NKS builds libcpre.o must be used
-if "%GNUC%" == "Y" goto gnuc
-if "%LIBC_BUILD%" == "Y" set PRELUDE=%IMPORTS%\libcpre.o
-rem if "%CLIB_BUILD%" == "Y" set PRELUDE=%IMPORTS%\clibpre.o
-if "%CLIB_BUILD%" == "Y" set PRELUDE=%IMPORTS%\prelude.o
-echo using MetroWerks CodeWarrior 
-goto info
-
-:gnuc
-if "%LIBC_BUILD%" == "Y" set PRELUDE=%IMPORTS%\libcpre.gcc.o
-rem if "%CLIB_BUILD%" == "Y" set PRELUDE=%IMPORTS%\clibpre.gcc.o
-if "%CLIB_BUILD%" == "Y" set PRELUDE=%IMPORTS%\prelude.gcc.o
-echo using GNU GCC Compiler 
-
-:info
-echo.
-
-if "%LIBC_BUILD%" == "Y" echo Enviroment configured for LibC build
-if "%LIBC_BUILD%" == "Y" echo use "netware\build.bat netware-libc ..." 
-
-if "%CLIB_BUILD%" == "Y" echo Enviroment configured for CLib build
-if "%CLIB_BUILD%" == "Y" echo use "netware\build.bat netware-clib ..." 
-
-goto end
-
-:usage
-rem ===============================================================
-echo.
-echo No target build specified!
-echo.
-echo usage: set_env [target] [compiler]
-echo.
-echo target      - "netware-clib" - Clib build
-echo             - "netware-libc" - LibC build
-echo.
-echo compiler    - "gnuc"         - GNU GCC Compiler
-echo             - "codewarrior"  - MetroWerks CodeWarrior (default)
-echo.
-
-:end
-echo.
-
-

PROBLEMS

@@ -36,9 +36,7 @@ may differ on your machine.
 
 
 As long as Apple doesn't fix the problem with ld, this problem building
-OpenSSL will remain as is. Well, the problem was addressed in 0.9.8f by
-passing -Wl,-search_paths_first, but it's unknown if the flag was
-supported from the initial MacOS X release.
+OpenSSL will remain as is.
 
 
 * Parallell make leads to errors
@@ -73,12 +71,6 @@ The solution is simple for now: don't run parallell make when testing.
   The recomendation is to upgrade your compiler. This naturally applies to
   other similar cases.
 
-- There is a subtle Solaris x86-specific gcc run-time environment bug, which
-  "falls between" OpenSSL [0.9.8 and later], Solaris ld and GCC. The bug
-  manifests itself as Segmentation Fault upon early application start-up.
-  The problem can be worked around by patching the environment according to
-  http://www.openssl.org/~appro/values.c.
-
 * solaris64-sparcv9-cc SHA-1 performance with WorkShop 6 compiler.
 
 As subject suggests SHA-1 might perform poorly (4 times slower)
@@ -170,30 +162,3 @@ hire /bin/ksh to do the job /bin/sh fails to do.
    your $PATH with chosen location, e.g. PATH=/tmp:$PATH. Alter-
    natively just replace system /bin/test and /bin/[ with the
    above script.
-
-* hpux64-ia64-cc fails blowfish test.
-
-Compiler bug, presumably at particular patch level. It should be noted
-that same compiler generates correct 32-bit code, a.k.a. hpux-ia64-cc
-target. Drop optimization level to +O2 when compiling 64-bit bf_skey.o.
-
-* no-engines generates errors.
-
-Unfortunately, the 'no-engines' configuration option currently doesn't
-work properly.  Use 'no-hw' and you'll will at least get no hardware
-support.  We'll see how we fix that on OpenSSL versions past 0.9.8.
-
-* 'make test' fails in BN_sqr [commonly with "error 139" denoting SIGSEGV]
-  if elder GNU binutils were deployed to link shared libcrypto.so.
-
-As subject suggests the failure is caused by a bug in elder binutils,
-either as or ld, and was observed on FreeBSD and Linux. There are two
-options. First is naturally to upgrade binutils, the second one - to
-reconfigure with additional no-sse2 [or 386] option passed to ./config.
-
-* If configured with ./config no-dso, toolkit still gets linked with -ldl,
-  which most notably poses a problem when linking with dietlibc.
-
-We don't have framework to associate -ldl with no-dso, therefore the only
-way is to edit Makefile right after ./config no-dso and remove -ldl from
-EX_LIBS line.

README

@@ -1,7 +1,7 @@
 
- OpenSSL 1.0.0d
+ OpenSSL 0.9.7m-dev xx XXX xxxx
 
- Copyright (c) 1998-2011 The OpenSSL Project
+ Copyright (c) 1998-2007 The OpenSSL Project
  Copyright (c) 1995-1998 Eric A. Young, Tim J. Hudson
  All rights reserved.
 
@@ -36,13 +36,12 @@
      actually logically part of it. It includes routines for the following:
 
      Ciphers
-        libdes - EAY's libdes DES encryption package which was floating
-                 around the net for a few years, and was then relicensed by
-                 him as part of SSLeay.  It includes 15 'modes/variations'
-                 of DES (1, 2 and 3 key versions of ecb, cbc, cfb and ofb;
-                 pcbc and a more general form of cfb and ofb) including desx
-                 in cbc mode, a fast crypt(3), and routines to read
-                 passwords from the keyboard.
+        libdes - EAY's libdes DES encryption package which has been floating
+                 around the net for a few years.  It includes 15
+                 'modes/variations' of DES (1, 2 and 3 key versions of ecb,
+                 cbc, cfb and ofb; pcbc and a more general form of cfb and
+                 ofb) including desx in cbc mode, a fast crypt(3), and
+                 routines to read passwords from the keyboard.
         RC4 encryption,
         RC2 encryption      - 4 different modes, ecb, cbc, cfb and ofb.
         Blowfish encryption - 4 different modes, ecb, cbc, cfb and ofb.
@@ -112,9 +111,7 @@
  should be contacted if that algorithm is to be used; their web page is
  http://www.ascom.ch/.
 
- NTT and Mitsubishi have patents and pending patents on the Camellia
- algorithm, but allow use at no charge without requiring an explicit
- licensing agreement: http://info.isl.ntt.co.jp/crypt/eng/info/chiteki.html
+ The MDC2 algorithm is patented by IBM.
 
  INSTALLATION
  ------------
@@ -137,9 +134,6 @@
  SUPPORT
  -------
 
- See the OpenSSL website www.openssl.org for details of how to obtain
- commercial technical support.
-
  If you have any problems with OpenSSL then please take the following steps
  first:
 
@@ -162,14 +156,10 @@
     - Stack Traceback (if the application dumps core)
 
  Report the bug to the OpenSSL project via the Request Tracker
- (http://www.openssl.org/support/rt.html) by mail to:
+ (http://www.openssl.org/support/rt2.html) by mail to:
 
     openssl-bugs@openssl.org
 
- Note that the request tracker should NOT be used for general assistance
- or support queries. Just because something doesn't work the way you expect
- does not mean it is necessarily a bug in OpenSSL.
-
  Note that mail to openssl-bugs@openssl.org is recorded in the publicly
  readable request tracker database and is forwarded to a public
  mailing list. Confidential mail may be sent to openssl-security@openssl.org
@@ -180,22 +170,10 @@
 
  Development is coordinated on the openssl-dev mailing list (see
  http://www.openssl.org for information on subscribing). If you
- would like to submit a patch, send it to openssl-bugs@openssl.org with
+ would like to submit a patch, send it to openssl-dev@openssl.org with
  the string "[PATCH]" in the subject. Please be sure to include a
  textual explanation of what your patch does.
 
- If you are unsure as to whether a feature will be useful for the general
- OpenSSL community please discuss it on the openssl-dev mailing list first.
- Someone may be already working on the same thing or there may be a good
- reason as to why that feature isn't implemented.
-
- Patches should be as up to date as possible, preferably relative to the
- current CVS or the last snapshot. They should follow the coding style of
- OpenSSL and compile without warnings. Some of the core team developer targets
- can be used for testing purposes, (debug-steve64, debug-geoff etc). OpenSSL
- compiles on many varied platforms: try to ensure you only use portable
- features.
-
  Note: For legal reasons, contributions from the US can be accepted only
  if a TSU notification and a copy of the patch are sent to crypt@bis.doc.gov
  (formerly BXA) with a copy to the ENC Encryption Request Coordinator;

STATUS

@@ -1,36 +1,15 @@
 
   OpenSSL STATUS                           Last modified at
-  ______________                           $Date: 2011/02/08 17:10:52 $
+  ______________                           $Date: 2006/09/28 11:56:56 $
 
   DEVELOPMENT STATE
 
-    o  OpenSSL 1.1.0:  Under development...
-    o  OpenSSL 1.0.1:  Under development...
-    o  OpenSSL 1.0.0d: Released on February   8nd, 2011
-    o  OpenSSL 1.0.0c: Released on December   2nd, 2010
-    o  OpenSSL 1.0.0b: Released on November  16th, 2010
-    o  OpenSSL 1.0.0a: Released on June      1st,  2010
-    o  OpenSSL 1.0.0:  Released on March     29th, 2010
-    o  OpenSSL 0.9.8r: Released on February   8nd, 2011
-    o  OpenSSL 0.9.8q: Released on December   2nd, 2010
-    o  OpenSSL 0.9.8p: Released on November  16th, 2010
-    o  OpenSSL 0.9.8o: Released on June       1st, 2010
-    o  OpenSSL 0.9.8n: Released on March     24th, 2010
-    o  OpenSSL 0.9.8m: Released on February  25th, 2010
-    o  OpenSSL 0.9.8l: Released on November   5th, 2009
-    o  OpenSSL 0.9.8k: Released on March     25th, 2009
-    o  OpenSSL 0.9.8j: Released on January    7th, 2009
-    o  OpenSSL 0.9.8i: Released on September 15th, 2008
-    o  OpenSSL 0.9.8h: Released on May       28th, 2008
-    o  OpenSSL 0.9.8g: Released on October   19th, 2007
-    o  OpenSSL 0.9.8f: Released on October   11th, 2007
-    o  OpenSSL 0.9.8e: Released on February  23rd, 2007
+    o  OpenSSL 0.9.9:  Under development...
     o  OpenSSL 0.9.8d: Released on September 28th, 2006
     o  OpenSSL 0.9.8c: Released on September  5th, 2006
     o  OpenSSL 0.9.8b: Released on May        4th, 2006
     o  OpenSSL 0.9.8a: Released on October   11th, 2005
     o  OpenSSL 0.9.8:  Released on July       5th, 2005
-    o  OpenSSL 0.9.7m: Released on February  23rd, 2007
     o  OpenSSL 0.9.7l: Released on September 28th, 2006
     o  OpenSSL 0.9.7k: Released on September  5th, 2006
     o  OpenSSL 0.9.7j: Released on May        4th, 2006
@@ -66,11 +45,10 @@
     o  OpenSSL 0.9.2b: Released on March     22th, 1999
     o  OpenSSL 0.9.1c: Released on December  23th, 1998
 
-  [See also http://www.openssl.org/support/rt.html]
+  [See also http://www.openssl.org/support/rt2.html]
 
   RELEASE SHOWSTOPPERS
 
-    o The Makefiles fail with some SysV makes.
     o 
 
   AVAILABLE PATCHES
@@ -87,18 +65,18 @@
 	Private key, certificate and CRL API and implementation.
 	Developing and bugfixing PKCS#7 (S/MIME code).
         Various X509 issues: character sets, certificate request extensions.
+    o Geoff and Richard are currently working on:
+	ENGINE (the new code that gives hardware support among others).
     o Richard is currently working on:
+	UI (User Interface)
+	UTIL (a new set of library functions to support some higher level
+	      functionality that is currently missing).
+	Shared library support for VMS.
+	Kerberos 5 authentication (Heimdal)
 	Constification
-	Attribute Certificate support
-	Certificate Pair support
-	Storage Engines (primarly an LDAP storage engine)
-	Certificate chain validation with full RFC 3280 compatibility
 
   NEEDS PATCH
 
-    o  0.9.8-dev: COMPLEMENTOFALL and COMPLEMENTOFDEFAULT do not
-       handle ECCdraft cipher suites correctly.
-
     o  apps/ca.c: "Sign the certificate?" - "n" creates empty certificate file
 
     o  "OpenSSL STATUS" is never up-to-date.

VMS/install.com

@@ -12,14 +12,6 @@ $	    WRITE SYS$OUTPUT "Should be the directory where you want things installed.
 $	    EXIT
 $	ENDIF
 $
-$	IF (F$GETSYI("CPU").LT.128)
-$	THEN
-$	    ARCH := VAX
-$	ELSE
-$	    ARCH = F$EDIT( F$GETSYI( "ARCH_NAME"), "UPCASE")
-$	    IF (ARCH .EQS. "") THEN ARCH = "UNK"
-$	ENDIF
-$
 $	ROOT = F$PARSE(P1,"[]A.;0",,,"SYNTAX_ONLY,NO_CONCEAL") - "A.;0"
 $	ROOT_DEV = F$PARSE(ROOT,,,"DEVICE","SYNTAX_ONLY")
 $	ROOT_DIR = F$PARSE(ROOT,,,"DIRECTORY","SYNTAX_ONLY") -
@@ -27,7 +19,13 @@ $	ROOT_DIR = F$PARSE(ROOT,,,"DIRECTORY","SYNTAX_ONLY") -
 $	ROOT = ROOT_DEV + "[" + ROOT_DIR
 $
 $	DEFINE/NOLOG WRK_SSLROOT 'ROOT'.] /TRANS=CONC
+$	DEFINE/NOLOG WRK_SSLVLIB WRK_SSLROOT:[VAX_LIB]
+$	DEFINE/NOLOG WRK_SSLALIB WRK_SSLROOT:[ALPHA_LIB]
 $	DEFINE/NOLOG WRK_SSLINCLUDE WRK_SSLROOT:[INCLUDE]
+$	DEFINE/NOLOG WRK_SSLVEXE WRK_SSLROOT:[VAX_EXE]
+$	DEFINE/NOLOG WRK_SSLAEXE WRK_SSLROOT:[ALPHA_EXE]
+$	DEFINE/NOLOG WRK_SSLCERTS WRK_SSLROOT:[CERTS]
+$	DEFINE/NOLOG WRK_SSLPRIVATE WRK_SSLROOT:[PRIVATE]
 $
 $	IF F$PARSE("WRK_SSLROOT:[000000]") .EQS. "" THEN -
 	   CREATE/DIR/LOG WRK_SSLROOT:[000000]
@@ -41,7 +39,7 @@ $	IF F$SEARCH("WRK_SSLINCLUDE:vms_idhacks.h") .NES. "" THEN -
 $
 $	OPEN/WRITE SF WRK_SSLROOT:[VMS]OPENSSL_STARTUP.COM
 $	WRITE SYS$OUTPUT "%OPEN-I-CREATED,  ",F$SEARCH("WRK_SSLROOT:[VMS]OPENSSL_STARTUP.COM")," created."
-$	WRITE SF "$! Startup file for Openssl"
+$	WRITE SF "$! Startup file for Openssl 0.9.2-RL 15-Mar-1999"
 $	WRITE SF "$!"
 $	WRITE SF "$! Do not edit this file, as it will be regenerated during next installation."
 $	WRITE SF "$! Instead, add or change SSLROOT:[VMS]OPENSSL_SYSTARTUP.COM"
@@ -49,13 +47,8 @@ $	WRITE SF "$!"
 $	WRITE SF "$! P1	a qualifier to DEFINE.  For example ""/SYSTEM"" to get the logical names"
 $	WRITE SF "$!	defined in the system logical name table."
 $	WRITE SF "$!"
-$	WRITE SF "$	IF (F$GETSYI(""CPU"").LT.128)"
-$	WRITE SF "$	THEN"
-$	WRITE SF "$	    ARCH := VAX"
-$	WRITE SF "$	ELSE"
-$	WRITE SF "$	    ARCH = F$EDIT( F$GETSYI( ""ARCH_NAME""), ""UPCASE"")"
-$	WRITE SF "$	    IF (ARCH .EQS. """") THEN ARCH = ""UNK"""
-$	WRITE SF "$	ENDIF"
+$	WRITE SF "$	ARCH = ""VAX"""
+$	WRITE SF "$	IF F$GETSYI(""CPU"") .GE. 128 THEN ARCH = ""ALPHA"""
 $	WRITE SF "$	DEFINE/NOLOG'P1	SSLROOT		",ROOT,".] /TRANS=CONC"
 $	WRITE SF "$	DEFINE/NOLOG'P1	SSLLIB		SSLROOT:['ARCH'_LIB]"
 $	WRITE SF "$	DEFINE/NOLOG'P1	SSLINCLUDE	SSLROOT:[INCLUDE]"

VMS/mkshared.com

@@ -3,10 +3,10 @@ $!
 $! No command line parameters.  This should be run at the start of the source
 $! tree (the same directory where one finds INSTALL.VMS).
 $!
-$! Input:	[.UTIL]LIBEAY.NUM,[.xxx.EXE.CRYPTO]LIBCRYPTO.OLB
-$!		[.UTIL]SSLEAY.NUM,[.xxx.EXE.SSL]LIBSSL.OLB
-$! Output:	[.xxx.EXE.CRYPTO]LIBCRYPTO.OPT,.MAP,.EXE
-$!		[.xxx.EXE.SSL]LIBSSL.OPT,.MAP,.EXE
+$! Input:	[.UTIL]LIBEAY.NUM,[.AXP.EXE.CRYPTO]LIBCRYPTO.OLB
+$!		[.UTIL]SSLEAY.NUM,[.AXP.EXE.SSL]LIBSSL.OLB
+$! Output:	[.AXP.EXE.CRYPTO]LIBCRYPTO.OPT,.MAP,.EXE
+$!		[.AXP.EXE.SSL]LIBSSL.OPT,.MAP,.EXE
 $!
 $! So far, tests have only been made on VMS for Alpha.  VAX will come in time.
 $! ===========================================================================
@@ -19,60 +19,31 @@ $   write sys$error "ERROR: Couldn't find any library version info..."
 $   exit
 $ endif
 $
-$ if (f$getsyi("cpu").lt.128)
+$ if f$getsyi("CPU") .ge. 128
 $ then
-$     arch := VAX
-$ else
-$     arch = f$edit( f$getsyi( "ARCH_NAME"), "UPCASE")
-$     if (arch .eqs. "") then arch = "UNK"
-$ endif
-$
-$ if arch .nes. "VAX"
-$ then
-$   arch_vax = 0
 $   libid  = "Crypto"
 $   libnum = "[.UTIL]LIBEAY.NUM"
-$   libdir = "[.''ARCH'.EXE.CRYPTO]"
+$   libdir = "[.AXP.EXE.CRYPTO]"
 $   libolb = "''libdir'LIBCRYPTO.OLB"
 $   libopt = "''libdir'LIBCRYPTO.OPT"
 $   libmap = "''libdir'LIBCRYPTO.MAP"
 $   libgoal= "''libdir'LIBCRYPTO.EXE"
 $   libref = ""
-$   if f$search(libdir+libolb) .nes. "" then gosub create_nonvax_shr
+$   gosub create_axp_shr
 $   libid  = "SSL"
 $   libnum = "[.UTIL]SSLEAY.NUM"
-$   libdir = "[.''ARCH'.EXE.SSL]"
+$   libdir = "[.AXP.EXE.SSL]"
 $   libolb = "''libdir'LIBSSL.OLB"
 $   libopt = "''libdir'LIBSSL.OPT"
 $   libmap = "''libdir'LIBSSL.MAP"
 $   libgoal= "''libdir'LIBSSL.EXE"
-$   libref = "[.''ARCH'.EXE.CRYPTO]LIBCRYPTO.EXE"
-$   if f$search(libdir+libolb) .nes. "" then gosub create_nonvax_shr
-$   arch_vax = 0
-$   libid  = "Crypto"
-$   libnum = "[.UTIL]LIBEAY.NUM"
-$   libdir = "[.''ARCH'.EXE.CRYPTO]"
-$   libolb = "''libdir'LIBCRYPTO32.OLB"
-$   libopt = "''libdir'LIBCRYPTO32.OPT"
-$   libmap = "''libdir'LIBCRYPTO32.MAP"
-$   libgoal= "''libdir'LIBCRYPTO32.EXE"
-$   libref = ""
-$   if f$search(libdir+libolb) .nes. "" then gosub create_nonvax_shr
-$   libid  = "SSL"
-$   libnum = "[.UTIL]SSLEAY.NUM"
-$   libdir = "[.''ARCH'.EXE.SSL]"
-$   libolb = "''libdir'LIBSSL32.OLB"
-$   libopt = "''libdir'LIBSSL32.OPT"
-$   libmap = "''libdir'LIBSSL32.MAP"
-$   libgoal= "''libdir'LIBSSL32.EXE"
-$   libref = "[.''ARCH'.EXE.CRYPTO]LIBCRYPTO32.EXE"
-$   if f$search(libdir+libolb) .nes. "" then gosub create_nonvax_shr
+$   libref = "[.AXP.EXE.CRYPTO]LIBCRYPTO.EXE"
+$   gosub create_axp_shr
 $ else
-$   arch_vax = 1
 $   libtit = "CRYPTO_TRANSFER_VECTOR"
 $   libid  = "Crypto"
 $   libnum = "[.UTIL]LIBEAY.NUM"
-$   libdir = "[.''ARCH'.EXE.CRYPTO]"
+$   libdir = "[.VAX.EXE.CRYPTO]"
 $   libmar = "''libdir'LIBCRYPTO.MAR"
 $   libolb = "''libdir'LIBCRYPTO.OLB"
 $   libopt = "''libdir'LIBCRYPTO.OPT"
@@ -81,26 +52,26 @@ $   libmap = "''libdir'LIBCRYPTO.MAP"
 $   libgoal= "''libdir'LIBCRYPTO.EXE"
 $   libref = ""
 $   libvec = "LIBCRYPTO"
-$   if f$search(libdir+libolb) .nes. "" then gosub create_vax_shr
+$   gosub create_vax_shr
 $   libtit = "SSL_TRANSFER_VECTOR"
 $   libid  = "SSL"
 $   libnum = "[.UTIL]SSLEAY.NUM"
-$   libdir = "[.''ARCH'.EXE.SSL]"
+$   libdir = "[.VAX.EXE.SSL]"
 $   libmar = "''libdir'LIBSSL.MAR"
 $   libolb = "''libdir'LIBSSL.OLB"
 $   libopt = "''libdir'LIBSSL.OPT"
 $   libobj = "''libdir'LIBSSL.OBJ"
 $   libmap = "''libdir'LIBSSL.MAP"
 $   libgoal= "''libdir'LIBSSL.EXE"
-$   libref = "[.''ARCH'.EXE.CRYPTO]LIBCRYPTO.EXE"
+$   libref = "[.VAX.EXE.CRYPTO]LIBCRYPTO.EXE"
 $   libvec = "LIBSSL"
-$   if f$search(libdir+libolb) .nes. "" then gosub create_vax_shr
+$   gosub create_vax_shr
 $ endif
 $ exit
 $
-$! ----- Subroutines to build the shareable libraries
-$! For each supported architecture, there's a main shareable library
-$! creator, which is called from the main code above.
+$! ----- Soubroutines to actually build the shareable libraries
+$! The way things work, there's a main shareable library creator for each
+$! supported architecture, which is called from the main code above.
 $! The creator will define a number of variables to tell the next levels of
 $! subroutines what routines to use to write to the option files, call the
 $! main processor, read_func_num, and when that is done, it will write version
@@ -126,10 +97,10 @@ $! read_func_num depends on the following variables from the creator:
 $! libwriter	The name of the writer routine to call for each .num file line
 $! -----
 $
-$! ----- Subroutines for non-VAX
+$! ----- Subroutines for AXP
 $! -----
 $! The creator routine
-$ create_nonvax_shr:
+$ create_axp_shr:
 $   open/write opt 'libopt'
 $   write opt "identification=""",libid," ",libverstr,""""
 $   write opt libolb,"/lib"
@@ -137,7 +108,7 @@ $   if libref .nes. "" then write opt libref,"/SHARE"
 $   write opt "SYMBOL_VECTOR=(-"
 $   libfirstentry := true
 $   libwrch   := opt
-$   libwriter := write_nonvax_transfer_entry
+$   libwriter := write_axp_transfer_entry
 $   textcount = 0
 $   gosub read_func_num
 $   write opt ")"
@@ -147,7 +118,7 @@ $   link/map='libmap'/full/share='libgoal' 'libopt'/option
 $   return
 $
 $! The record writer routine
-$ write_nonvax_transfer_entry:
+$ write_axp_transfer_entry:
 $   if libentry .eqs. ".dummy" then return
 $   if info_kind .eqs. "VARIABLE"
 $   then
@@ -173,7 +144,7 @@ $   libfirstentry := false
 $   textcount = textcount + textcount_this
 $   return
 $
-$! ----- Subroutines for VAX
+$! ----- Subroutines for AXP
 $! -----
 $! The creator routine
 $ create_vax_shr:
@@ -293,15 +264,16 @@ $             truesum = truesum + 1
 $           if plat_entry .eqs. "!EXPORT_VAR_AS_FUNCTION" then -
 $             falsesum = falsesum + 1
 $         endif
-$!
-$         if ((plat_entry .eqs. "VMS") .or. -
-            (arch_vax .and. (plat_entry .eqs. "VMSVAX"))) then -
-            truesum = truesum + 1
-$!
-$         if ((plat_entry .eqs. "!VMS") .or. -
-            (arch_vax .and. (plat_entry .eqs. "!VMSVAX"))) then -
-            falsesum = falsesum + 1
-$!
+$         if plat_entry .eqs. "VMS" then truesum = truesum + 1
+$         if plat_entry .eqs. "!VMS" then falsesum = falsesum + 1
+$         if f$trnlnm("OPENSSL_FIPS") .nes. ""
+$         then
+$           if plat_entry .eqs. "OPENSSL_FIPS" then truesum = truesum + 1
+$           if plat_entry .eqs. "!OPENSSL_FIPS" then falsesum = falsesum + 1
+$         else
+$           if plat_entry .eqs. "OPENSSL_FIPS" then falsesum = falsesum + 1
+$           if plat_entry .eqs. "!OPENSSL_FIPS" then truesum = truesum + 1
+$         endif
 $	  goto loop1
 $       endif
 $     endloop1:
@@ -321,7 +293,6 @@ $       if alg_entry .eqs. "" then goto loop2
 $       if alg_entry .nes. ","
 $       then
 $         if alg_entry .eqs. "KRB5" then goto loop ! Special for now
-$	  if alg_entry .eqs. "STATIC_ENGINE" then goto loop ! Special for now
 $         if f$trnlnm("OPENSSL_NO_"+alg_entry) .nes. "" then goto loop
 $	  goto loop2
 $       endif

VMS/openssl_utils.com

@@ -8,39 +8,31 @@ $!
 $!
 $! Slightly modified by Richard Levitte <richard@levitte.org>
 $!
-$!
-$! Always define OPENSSL.  Others are optional (non-null P1).
-$!
 $ OPENSSL  :== $SSLEXE:OPENSSL
-$
-$ IF (P1 .NES. "")
-$ THEN
-$     VERIFY   :== $SSLEXE:OPENSSL VERIFY
-$     ASN1PARSE:== $SSLEXE:OPENSSL ASN1PARS
-$! REQ could conflict with REQUEST.
-$     OREQ     :== $SSLEXE:OPENSSL REQ
-$     DGST     :== $SSLEXE:OPENSSL DGST
-$     DH       :== $SSLEXE:OPENSSL DH
-$     ENC      :== $SSLEXE:OPENSSL ENC
-$     GENDH    :== $SSLEXE:OPENSSL GENDH
-$     ERRSTR   :== $SSLEXE:OPENSSL ERRSTR
-$     CA       :== $SSLEXE:OPENSSL CA
-$     CRL      :== $SSLEXE:OPENSSL CRL
-$     RSA      :== $SSLEXE:OPENSSL RSA
-$     DSA      :== $SSLEXE:OPENSSL DSA
-$     DSAPARAM :== $SSLEXE:OPENSSL DSAPARAM
-$     X509     :== $SSLEXE:OPENSSL X509
-$     GENRSA   :== $SSLEXE:OPENSSL GENRSA
-$     GENDSA   :== $SSLEXE:OPENSSL GENDSA
-$     S_SERVER :== $SSLEXE:OPENSSL S_SERVER
-$     S_CLIENT :== $SSLEXE:OPENSSL S_CLIENT
-$     SPEED    :== $SSLEXE:OPENSSL SPEED
-$     S_TIME   :== $SSLEXE:OPENSSL S_TIME
-$     VERSION  :== $SSLEXE:OPENSSL VERSION
-$     PKCS7    :== $SSLEXE:OPENSSL PKCS7
-$     CRL2PKCS7:== $SSLEXE:OPENSSL CRL2P7
-$     SESS_ID  :== $SSLEXE:OPENSSL SESS_ID
-$     CIPHERS  :== $SSLEXE:OPENSSL CIPHERS
-$     NSEQ     :== $SSLEXE:OPENSSL NSEQ
-$     PKCS12   :== $SSLEXE:OPENSSL PKCS12
-$ ENDIF
+$ VERIFY   :== $SSLEXE:OPENSSL VERIFY
+$ ASN1PARSE:== $SSLEXE:OPENSSL ASN1PARS
+$ REQ      :== $SSLEXE:OPENSSL REQ
+$ DGST     :== $SSLEXE:OPENSSL DGST
+$ DH       :== $SSLEXE:OPENSSL DH
+$ ENC      :== $SSLEXE:OPENSSL ENC
+$ GENDH    :== $SSLEXE:OPENSSL GENDH
+$ ERRSTR   :== $SSLEXE:OPENSSL ERRSTR
+$ CA       :== $SSLEXE:OPENSSL CA
+$ CRL      :== $SSLEXE:OPENSSL CRL
+$ RSA      :== $SSLEXE:OPENSSL RSA
+$ DSA      :== $SSLEXE:OPENSSL DSA
+$ DSAPARAM :== $SSLEXE:OPENSSL DSAPARAM
+$ X509     :== $SSLEXE:OPENSSL X509
+$ GENRSA   :== $SSLEXE:OPENSSL GENRSA
+$ GENDSA   :== $SSLEXE:OPENSSL GENDSA
+$ S_SERVER :== $SSLEXE:OPENSSL S_SERVER
+$ S_CLIENT :== $SSLEXE:OPENSSL S_CLIENT
+$ SPEED    :== $SSLEXE:OPENSSL SPEED
+$ S_TIME   :== $SSLEXE:OPENSSL S_TIME
+$ VERSION  :== $SSLEXE:OPENSSL VERSION
+$ PKCS7    :== $SSLEXE:OPENSSL PKCS7
+$ CRL2PKCS7:== $SSLEXE:OPENSSL CRL2P7
+$ SESS_ID  :== $SSLEXE:OPENSSL SESS_ID
+$ CIPHERS  :== $SSLEXE:OPENSSL CIPHERS
+$ NSEQ     :== $SSLEXE:OPENSSL NSEQ
+$ PKCS12   :== $SSLEXE:OPENSSL PKCS12

apps/.cvsignore

@@ -3,6 +3,6 @@ Makefile.save
 der_chop
 der_chop.bak
 CA.pl
+openssl.sha1
 *.flc
 semantic.cache
-*.dll

apps/CA.com

@@ -114,8 +114,8 @@ $!
 $   IF F$SEARCH(CATOP+".private"+CAKEY) .EQS. ""
 $   THEN
 $     READ '__INPUT' FILE -
-	   /PROMPT="CA certificate filename (or enter to create)"
-$     IF (FILE .NES. "") .AND. (F$SEARCH(FILE) .NES. "")
+	   /PROMT="CA certificate filename (or enter to create)"
+$     IF F$SEARCH(FILE) .NES. ""
 $     THEN
 $       COPY 'FILE' 'CATOP'.private'CAKEY'
 $	RET=$STATUS

apps/CA.pl.in

@@ -45,8 +45,7 @@ if(defined $ENV{OPENSSL}) {
 }
 
 $SSLEAY_CONFIG=$ENV{"SSLEAY_CONFIG"};
-$DAYS="-days 365";	# 1 year
-$CADAYS="-days 1095";	# 3 years
+$DAYS="-days 365";
 $REQ="$openssl req $SSLEAY_CONFIG";
 $CA="$openssl ca $SSLEAY_CONFIG";
 $VERIFY="$openssl verify";
@@ -55,7 +54,6 @@ $PKCS12="$openssl pkcs12";
 
 $CATOP="./demoCA";
 $CAKEY="cakey.pem";
-$CAREQ="careq.pem";
 $CACERT="cacert.pem";
 
 $DIRMODE = 0777;
@@ -94,9 +92,6 @@ foreach (@ARGV) {
 		mkdir "${CATOP}/private", $DIRMODE;
 		open OUT, ">${CATOP}/index.txt";
 		close OUT;
-		open OUT, ">${CATOP}/crlnumber";
-		print OUT "01\n";
-		close OUT;
 	    }
 	    if ( ! -f "${CATOP}/private/$CAKEY" ) {
 		print "CA certificate filename (or enter to create)\n";
@@ -111,16 +106,15 @@ foreach (@ARGV) {
 		    $RET=$?;
 		} else {
 		    print "Making CA certificate ...\n";
-		    system ("$REQ -new -keyout " .
-			"${CATOP}/private/$CAKEY -out ${CATOP}/$CAREQ");
-		    system ("$CA -create_serial " .
-			"-out ${CATOP}/$CACERT $CADAYS -batch " . 
-			"-keyfile ${CATOP}/private/$CAKEY -selfsign " .
-			"-extensions v3_ca " .
-			"-infiles ${CATOP}/$CAREQ ");
+		    system ("$REQ -new -x509 -keyout " .
+			"${CATOP}/private/$CAKEY -out ${CATOP}/$CACERT $DAYS");
 		    $RET=$?;
 		}
 	    }
+	    if (! -f "${CATOP}/serial" ) {
+		system ("$X509 -in ${CATOP}/$CACERT -noout "
+			. "-next_serial -out ${CATOP}/serial");
+	    }
 	} elsif (/^-pkcs12$/) {
 	    my $cname = $ARGV[1];
 	    $cname = "My Certificate" unless defined $cname;

apps/CA.sh

@@ -16,8 +16,8 @@
 # 12-Jan-96 tjh    Added more things ... including CA -signcert which
 #                  converts a certificate to a request and then signs it.
 # 10-Jan-96 eay    Fixed a few more bugs and added the SSLEAY_CONFIG
-#                  environment variable so this can be driven from
-#                  a script.
+#		   environment variable so this can be driven from
+#		   a script.
 # 25-Jul-96 eay    Cleaned up filenames some more.
 # 11-Jun-96 eay    Fixed a few filename missmatches.
 # 03-May-96 eay    Modified to use 'ssleay cmd' instead of 'cmd'.
@@ -29,56 +29,24 @@
 
 # default openssl.cnf file has setup as per the following
 # demoCA ... where everything is stored
-cp_pem() {
-    infile=$1
-    outfile=$2
-    bound=$3
-    flag=0
-    exec <$infile;
-    while read line; do
-	if [ $flag -eq 1 ]; then
-		echo $line|grep "^-----END.*$bound"  2>/dev/null 1>/dev/null
-		if [ $? -eq 0 ] ; then
-			echo $line >>$outfile
-			break
-		else
-			echo $line >>$outfile
-		fi
-	fi
-
-	echo $line|grep "^-----BEGIN.*$bound"  2>/dev/null 1>/dev/null
-	if [ $? -eq 0 ]; then
-		echo $line >$outfile
-		flag=1
-	fi
-    done
-}
-
-usage() {
- echo "usage: $0 -newcert|-newreq|-newreq-nodes|-newca|-sign|-verify" >&2
-}
 
 if [ -z "$OPENSSL" ]; then OPENSSL=openssl; fi
 
-if [ -z "$DAYS" ] ; then DAYS="-days 365" ; fi	# 1 year
-CADAYS="-days 1095"	# 3 years
+DAYS="-days 365"
 REQ="$OPENSSL req $SSLEAY_CONFIG"
 CA="$OPENSSL ca $SSLEAY_CONFIG"
 VERIFY="$OPENSSL verify"
 X509="$OPENSSL x509"
-PKCS12="openssl pkcs12"
 
-if [ -z "$CATOP" ] ; then CATOP=./demoCA ; fi
+CATOP=./demoCA
 CAKEY=./cakey.pem
-CAREQ=./careq.pem
 CACERT=./cacert.pem
 
-RET=0
-
-while [ "$1" != "" ] ; do
-case $1 in
+for i
+do
+case $i in
 -\?|-h|-help)
-    usage
+    echo "usage: CA -newcert|-newreq|-newca|-sign|-verify" >&2
     exit 0
     ;;
 -newcert) 
@@ -93,23 +61,18 @@ case $1 in
     RET=$?
     echo "Request is in newreq.pem, private key is in newkey.pem"
     ;;
--newreq-nodes) 
-    # create a certificate request
-    $REQ -new -nodes -keyout newreq.pem -out newreq.pem $DAYS
-    RET=$?
-    echo "Request (and private key) is in newreq.pem"
-    ;;
 -newca)     
     # if explicitly asked for or it doesn't exist then setup the directory
     # structure that Eric likes to manage things 
     NEW="1"
     if [ "$NEW" -o ! -f ${CATOP}/serial ]; then
 	# create the directory hierarchy
-	mkdir -p ${CATOP}
-	mkdir -p ${CATOP}/certs
-	mkdir -p ${CATOP}/crl
-	mkdir -p ${CATOP}/newcerts
-	mkdir -p ${CATOP}/private
+	mkdir ${CATOP} 
+	mkdir ${CATOP}/certs 
+	mkdir ${CATOP}/crl 
+	mkdir ${CATOP}/newcerts
+	mkdir ${CATOP}/private
+	echo "01" > ${CATOP}/serial
 	touch ${CATOP}/index.txt
     fi
     if [ ! -f ${CATOP}/private/$CAKEY ]; then
@@ -118,21 +81,12 @@ case $1 in
 
 	# ask user for existing CA certificate
 	if [ "$FILE" ]; then
-	    cp_pem $FILE ${CATOP}/private/$CAKEY PRIVATE
-	    cp_pem $FILE ${CATOP}/$CACERT CERTIFICATE
+	    cp $FILE ${CATOP}/private/$CAKEY
 	    RET=$?
-	    if [ ! -f "${CATOP}/serial" ]; then
-		$X509 -in ${CATOP}/$CACERT -noout -next_serial \
-		      -out ${CATOP}/serial
-	    fi
 	else
 	    echo "Making CA certificate ..."
-	    $REQ -new -keyout ${CATOP}/private/$CAKEY \
-			   -out ${CATOP}/$CAREQ
-	    $CA -create_serial -out ${CATOP}/$CACERT $CADAYS -batch \
-			   -keyfile ${CATOP}/private/$CAKEY -selfsign \
-			   -extensions v3_ca \
-			   -infiles ${CATOP}/$CAREQ
+	    $REQ -new -x509 -keyout ${CATOP}/private/$CAKEY \
+			   -out ${CATOP}/$CACERT $DAYS
 	    RET=$?
 	fi
     fi
@@ -141,33 +95,16 @@ case $1 in
     $CA -policy policy_anything -infiles newreq.pem 
     RET=$?
     ;;
--pkcs12)
-    if [ -z "$2" ] ; then
-	CNAME="My Certificate"
-    else
-	CNAME="$2"
-    fi
-    $PKCS12 -in newcert.pem -inkey newreq.pem -certfile ${CATOP}/$CACERT \
-	    -out newcert.p12 -export -name "$CNAME"
-    RET=$?
-    exit $RET
-    ;;
 -sign|-signreq) 
     $CA -policy policy_anything -out newcert.pem -infiles newreq.pem
     RET=$?
     cat newcert.pem
     echo "Signed certificate is in newcert.pem"
     ;;
--signCA)
-    $CA -policy policy_anything -out newcert.pem -extensions v3_ca -infiles newreq.pem
-    RET=$?
-    echo "Signed CA certificate is in newcert.pem"
-    ;;
 -signcert) 
     echo "Cert passphrase will be requested twice - bug?"
     $X509 -x509toreq -in newreq.pem -signkey newreq.pem -out tmp.pem
     $CA -policy policy_anything -out newcert.pem -infiles tmp.pem
-    RET=$?
     cat newcert.pem
     echo "Signed certificate is in newcert.pem"
     ;;
@@ -185,14 +122,13 @@ case $1 in
 	    fi
 	done
     fi
-    exit $RET
+    exit 0
     ;;
 *)
-    echo "Unknown arg $i" >&2
-    usage
+    echo "Unknown arg $i";
     exit 1
     ;;
 esac
-shift
 done
 exit $RET
+

apps/apps.h

@@ -114,7 +114,9 @@
 
 #include "e_os.h"
 
+#include <openssl/buffer.h>
 #include <openssl/bio.h>
+#include <openssl/crypto.h>
 #include <openssl/x509.h>
 #include <openssl/lhash.h>
 #include <openssl/conf.h>
@@ -122,9 +124,6 @@
 #ifndef OPENSSL_NO_ENGINE
 #include <openssl/engine.h>
 #endif
-#ifndef OPENSSL_NO_OCSP
-#include <openssl/ocsp.h>
-#endif
 #include <openssl/ossl_typ.h>
 
 int app_RAND_load_file(const char *file, BIO *bio_e, int dont_warn);
@@ -137,6 +136,11 @@ long app_RAND_load_files(char *file); /* `file' is a list of files to read,
                                        * (see e_os.h).  The string is
                                        * destroyed! */
 
+#ifdef OPENSSL_SYS_WIN32
+#define rename(from,to) WIN32_rename((from),(to))
+int WIN32_rename(char *oldname,char *newname);
+#endif
+
 #ifndef MONOLITH
 
 #define MAIN(a,v)	main(a,v)
@@ -144,9 +148,11 @@ long app_RAND_load_files(char *file); /* `file' is a list of files to read,
 #ifndef NON_MAIN
 CONF *config=NULL;
 BIO *bio_err=NULL;
+int in_FIPS_mode=0;
 #else
 extern CONF *config;
 extern BIO *bio_err;
+extern int in_FIPS_mode;
 #endif
 
 #else
@@ -155,12 +161,11 @@ extern BIO *bio_err;
 extern CONF *config;
 extern char *default_config_file;
 extern BIO *bio_err;
+extern int in_FIPS_mode;
 
 #endif
 
-#ifndef OPENSSL_SYS_NETWARE
 #include <signal.h>
-#endif
 
 #ifdef SIGPIPE
 #define do_pipe_sig()	signal(SIGPIPE,SIG_IGN)
@@ -168,47 +173,64 @@ extern BIO *bio_err;
 #define do_pipe_sig()
 #endif
 
-#ifdef OPENSSL_NO_COMP
-#define zlib_cleanup() 
-#else
-#define zlib_cleanup() COMP_zlib_cleanup()
-#endif
-
 #if defined(MONOLITH) && !defined(OPENSSL_C)
 #  define apps_startup() \
 		do_pipe_sig()
 #  define apps_shutdown()
 #else
 #  ifndef OPENSSL_NO_ENGINE
-#    define apps_startup() \
-			do { do_pipe_sig(); CRYPTO_malloc_init(); \
+#    if defined(OPENSSL_SYS_MSDOS) || defined(OPENSSL_SYS_WIN16) || \
+     defined(OPENSSL_SYS_WIN32)
+#      ifdef _O_BINARY
+#        define apps_startup() \
+			do { _fmode=_O_BINARY; do_pipe_sig(); CRYPTO_malloc_init(); \
 			ERR_load_crypto_strings(); OpenSSL_add_all_algorithms(); \
 			ENGINE_load_builtin_engines(); setup_ui_method(); } while(0)
+#      else
+#        define apps_startup() \
+			do { _fmode=O_BINARY; do_pipe_sig(); CRYPTO_malloc_init(); \
+			ERR_load_crypto_strings(); OpenSSL_add_all_algorithms(); \
+			ENGINE_load_builtin_engines(); setup_ui_method(); } while(0)
+#      endif
+#    else
+#      define apps_startup() \
+			do { do_pipe_sig(); OpenSSL_add_all_algorithms(); \
+			ERR_load_crypto_strings(); ENGINE_load_builtin_engines(); \
+			setup_ui_method(); } while(0)
+#    endif
 #    define apps_shutdown() \
 			do { CONF_modules_unload(1); destroy_ui_method(); \
-			OBJ_cleanup(); EVP_cleanup(); ENGINE_cleanup(); \
-			CRYPTO_cleanup_all_ex_data(); ERR_remove_thread_state(NULL); \
-			ERR_free_strings(); zlib_cleanup();} while(0)
+			EVP_cleanup(); ENGINE_cleanup(); \
+			CRYPTO_cleanup_all_ex_data(); ERR_remove_state(0); \
+			ERR_free_strings(); } while(0)
 #  else
-#    define apps_startup() \
-			do { do_pipe_sig(); CRYPTO_malloc_init(); \
+#    if defined(OPENSSL_SYS_MSDOS) || defined(OPENSSL_SYS_WIN16) || \
+     defined(OPENSSL_SYS_WIN32)
+#      ifdef _O_BINARY
+#        define apps_startup() \
+			do { _fmode=_O_BINARY; do_pipe_sig(); CRYPTO_malloc_init(); \
 			ERR_load_crypto_strings(); OpenSSL_add_all_algorithms(); \
 			setup_ui_method(); } while(0)
+#      else
+#        define apps_startup() \
+			do { _fmode=O_BINARY; do_pipe_sig(); CRYPTO_malloc_init(); \
+			ERR_load_crypto_strings(); OpenSSL_add_all_algorithms(); \
+			setup_ui_method(); } while(0)
+#      endif
+#    else
+#      define apps_startup() \
+			do { do_pipe_sig(); OpenSSL_add_all_algorithms(); \
+			ERR_load_crypto_strings(); \
+			setup_ui_method(); } while(0)
+#    endif
 #    define apps_shutdown() \
 			do { CONF_modules_unload(1); destroy_ui_method(); \
-			OBJ_cleanup(); EVP_cleanup(); \
-			CRYPTO_cleanup_all_ex_data(); ERR_remove_thread_state(NULL); \
-			ERR_free_strings(); zlib_cleanup(); } while(0)
+			EVP_cleanup(); \
+			CRYPTO_cleanup_all_ex_data(); ERR_remove_state(0); \
+			ERR_free_strings(); } while(0)
 #  endif
 #endif
 
-#ifdef OPENSSL_SYSNAME_WIN32
-#  define openssl_fdset(a,b) FD_SET((unsigned int)a, b)
-#else
-#  define openssl_fdset(a,b) FD_SET(a, b)
-#endif
-
-
 typedef struct args_st
 	{
 	char **data;
@@ -235,7 +257,7 @@ void program_name(char *in,char *out,int size);
 int chopup_args(ARGS *arg,char *buf, int *argc, char **argv[]);
 #ifdef HEADER_X509_H
 int dump_cert_text(BIO *out, X509 *x);
-void print_name(BIO *out, const char *title, X509_NAME *nm, unsigned long lflags);
+void print_name(BIO *out, char *title, X509_NAME *nm, unsigned long lflags);
 #endif
 int set_cert_ex(unsigned long *flags, const char *arg);
 int set_name_ex(unsigned long *flags, const char *arg);
@@ -251,26 +273,17 @@ EVP_PKEY *load_pubkey(BIO *err, const char *file, int format, int maybe_stdin,
 	const char *pass, ENGINE *e, const char *key_descrip);
 STACK_OF(X509) *load_certs(BIO *err, const char *file, int format,
 	const char *pass, ENGINE *e, const char *cert_descrip);
-STACK_OF(X509_CRL) *load_crls(BIO *err, const char *file, int format,
-	const char *pass, ENGINE *e, const char *cert_descrip);
 X509_STORE *setup_verify(BIO *bp, char *CAfile, char *CApath);
 #ifndef OPENSSL_NO_ENGINE
 ENGINE *setup_engine(BIO *err, const char *engine, int debug);
 #endif
 
-#ifndef OPENSSL_NO_OCSP
-OCSP_RESPONSE *process_responder(BIO *err, OCSP_REQUEST *req,
-			char *host, char *path, char *port, int use_ssl,
-			STACK_OF(CONF_VALUE) *headers,
-			int req_timeout);
-#endif
-
 int load_config(BIO *err, CONF *cnf);
 char *make_config_name(void);
 
 /* Functions defined in ca.c and also used in ocsp.c */
 int unpack_revinfo(ASN1_TIME **prevtm, int *preason, ASN1_OBJECT **phold,
-			ASN1_GENERALIZEDTIME **pinvtm, const char *str);
+			ASN1_GENERALIZEDTIME **pinvtm, char *str);
 
 #define DB_type         0
 #define DB_exp_date     1
@@ -300,30 +313,12 @@ int rotate_serial(char *serialfile, char *new_suffix, char *old_suffix);
 int rand_serial(BIGNUM *b, ASN1_INTEGER *ai);
 CA_DB *load_index(char *dbfile, DB_ATTR *dbattr);
 int index_index(CA_DB *db);
-int save_index(const char *dbfile, const char *suffix, CA_DB *db);
-int rotate_index(const char *dbfile, const char *new_suffix, const char *old_suffix);
+int save_index(char *dbfile, char *suffix, CA_DB *db);
+int rotate_index(char *dbfile, char *new_suffix, char *old_suffix);
 void free_index(CA_DB *db);
-#define index_name_cmp_noconst(a, b) \
-	index_name_cmp((const OPENSSL_CSTRING *)CHECKED_PTR_OF(OPENSSL_STRING, a), \
-	(const OPENSSL_CSTRING *)CHECKED_PTR_OF(OPENSSL_STRING, b))
-int index_name_cmp(const OPENSSL_CSTRING *a, const OPENSSL_CSTRING *b);
-int parse_yesno(const char *str, int def);
+int index_name_cmp(const char **a, const char **b);
 
-X509_NAME *parse_name(char *str, long chtype, int multirdn);
-int args_verify(char ***pargs, int *pargc,
-			int *badarg, BIO *err, X509_VERIFY_PARAM **pm);
-void policies_print(BIO *out, X509_STORE_CTX *ctx);
-int bio_to_mem(unsigned char **out, int maxlen, BIO *in);
-int pkey_ctrl_string(EVP_PKEY_CTX *ctx, char *value);
-int init_gen_str(BIO *err, EVP_PKEY_CTX **pctx,
-			const char *algname, ENGINE *e, int do_param);
-#ifndef OPENSSL_NO_PSK
-extern char *psk_key;
-#endif
-#ifndef OPENSSL_NO_JPAKE
-void jpake_client_auth(BIO *out, BIO *conn, const char *secret);
-void jpake_server_auth(BIO *out, BIO *conn, const char *secret);
-#endif
+X509_NAME *do_subject(char *str, long chtype);
 
 #define FORMAT_UNDEF    0
 #define FORMAT_ASN1     1
@@ -335,10 +330,6 @@ void jpake_server_auth(BIO *out, BIO *conn, const char *secret);
 #define FORMAT_ENGINE   7
 #define FORMAT_IISSGC	8	/* XXX this stupid macro helps us to avoid
 				 * adding yet another param to load_*key() */
-#define FORMAT_PEMRSA	9	/* PEM RSAPubicKey format */
-#define FORMAT_ASN1RSA	10	/* DER RSAPubicKey format */
-#define FORMAT_MSBLOB	11	/* MS Key blob format */
-#define FORMAT_PVK	12	/* MS PVK file format */
 
 #define EXT_COPY_NONE	0
 #define EXT_COPY_ADD	1
@@ -350,11 +341,4 @@ void jpake_server_auth(BIO *out, BIO *conn, const char *secret);
 
 #define SERIAL_RAND_BITS	64
 
-int app_isdir(const char *);
-int raw_read_stdin(void *,int);
-int raw_write_stdout(const void *,int);
-
-#define TM_START	0
-#define TM_STOP		1
-double app_tminterval (int stop,int usertime);
 #endif

apps/asn1pars.c

@@ -56,7 +56,7 @@
  * [including the GNU Public Licence.]
  */
 
-/* A nice addition from Dr Stephen Henson <steve@openssl.org> to 
+/* A nice addition from Dr Stephen Henson <shenson@bigfoot.com> to 
  * add the -strparse option which parses nested binary structures
  */
 
@@ -82,8 +82,6 @@
 
 int MAIN(int, char **);
 
-static int do_generate(BIO *bio, char *genstr, char *genconf, BUF_MEM *buf);
-
 int MAIN(int argc, char **argv)
 	{
 	int i,badops=0,offset=0,ret=1,j;
@@ -92,11 +90,9 @@ int MAIN(int argc, char **argv)
 	BIO *in=NULL,*out=NULL,*b64=NULL, *derout = NULL;
 	int informat,indent=0, noout = 0, dump = 0;
 	char *infile=NULL,*str=NULL,*prog,*oidfile=NULL, *derfile=NULL;
-	char *genstr=NULL, *genconf=NULL;
 	unsigned char *tmpbuf;
-	const unsigned char *ctmpbuf;
 	BUF_MEM *buf=NULL;
-	STACK_OF(OPENSSL_STRING) *osk=NULL;
+	STACK *osk=NULL;
 	ASN1_TYPE *at=NULL;
 
 	informat=FORMAT_PEM;
@@ -113,7 +109,7 @@ int MAIN(int argc, char **argv)
 	prog=argv[0];
 	argc--;
 	argv++;
-	if ((osk=sk_OPENSSL_STRING_new_null()) == NULL)
+	if ((osk=sk_new_null()) == NULL)
 		{
 		BIO_printf(bio_err,"Memory allocation failure\n");
 		goto end;
@@ -169,17 +165,7 @@ int MAIN(int argc, char **argv)
 		else if (strcmp(*argv,"-strparse") == 0)
 			{
 			if (--argc < 1) goto bad;
-			sk_OPENSSL_STRING_push(osk,*(++argv));
-			}
-		else if (strcmp(*argv,"-genstr") == 0)
-			{
-			if (--argc < 1) goto bad;
-			genstr= *(++argv);
-			}
-		else if (strcmp(*argv,"-genconf") == 0)
-			{
-			if (--argc < 1) goto bad;
-			genconf= *(++argv);
+			sk_push(osk,*(++argv));
 			}
 		else
 			{
@@ -209,8 +195,6 @@ bad:
 		BIO_printf(bio_err," -strparse offset\n");
 		BIO_printf(bio_err,"               a series of these can be used to 'dig' into multiple\n");
 		BIO_printf(bio_err,"               ASN1 blob wrappings\n");
-		BIO_printf(bio_err," -genstr str   string to generate ASN1 structure from\n");
-		BIO_printf(bio_err," -genconf file file to generate ASN1 structure from\n");
 		goto end;
 		}
 
@@ -264,63 +248,48 @@ bad:
 	if ((buf=BUF_MEM_new()) == NULL) goto end;
 	if (!BUF_MEM_grow(buf,BUFSIZ*8)) goto end; /* Pre-allocate :-) */
 
-	if (genstr || genconf)
+	if (informat == FORMAT_PEM)
 		{
-		num = do_generate(bio_err, genstr, genconf, buf);
-		if (num < 0)
-			{
-			ERR_print_errors(bio_err);
+		BIO *tmp;
+
+		if ((b64=BIO_new(BIO_f_base64())) == NULL)
 			goto end;
-			}
+		BIO_push(b64,in);
+		tmp=in;
+		in=b64;
+		b64=tmp;
 		}
 
-	else
+	num=0;
+	for (;;)
 		{
-
-		if (informat == FORMAT_PEM)
-			{
-			BIO *tmp;
-
-			if ((b64=BIO_new(BIO_f_base64())) == NULL)
-				goto end;
-			BIO_push(b64,in);
-			tmp=in;
-			in=b64;
-			b64=tmp;
-			}
-
-		num=0;
-		for (;;)
-			{
-			if (!BUF_MEM_grow(buf,(int)num+BUFSIZ)) goto end;
-			i=BIO_read(in,&(buf->data[num]),BUFSIZ);
-			if (i <= 0) break;
-			num+=i;
-			}
+		if (!BUF_MEM_grow(buf,(int)num+BUFSIZ)) goto end;
+		i=BIO_read(in,&(buf->data[num]),BUFSIZ);
+		if (i <= 0) break;
+		num+=i;
 		}
 	str=buf->data;
 
 	/* If any structs to parse go through in sequence */
 
-	if (sk_OPENSSL_STRING_num(osk))
+	if (sk_num(osk))
 		{
 		tmpbuf=(unsigned char *)str;
 		tmplen=num;
-		for (i=0; i<sk_OPENSSL_STRING_num(osk); i++)
+		for (i=0; i<sk_num(osk); i++)
 			{
-			ASN1_TYPE *atmp;
 			int typ;
-			j=atoi(sk_OPENSSL_STRING_value(osk,i));
+			ASN1_TYPE *atmp;
+			j=atoi(sk_value(osk,i));
 			if (j == 0)
 				{
-				BIO_printf(bio_err,"'%s' is an invalid number\n",sk_OPENSSL_STRING_value(osk,i));
+				BIO_printf(bio_err,"'%s' is an invalid number\n",sk_value(osk,i));
 				continue;
 				}
 			tmpbuf+=j;
 			tmplen-=j;
 			atmp = at;
-			ctmpbuf = tmpbuf;
-			at = d2i_ASN1_TYPE(NULL,&ctmpbuf,tmplen);
+			at = d2i_ASN1_TYPE(NULL,&tmpbuf,tmplen);
 			ASN1_TYPE_free(atmp);
 			if(!at)
 				{
@@ -378,67 +347,9 @@ end:
 		ERR_print_errors(bio_err);
 	if (buf != NULL) BUF_MEM_free(buf);
 	if (at != NULL) ASN1_TYPE_free(at);
-	if (osk != NULL) sk_OPENSSL_STRING_free(osk);
+	if (osk != NULL) sk_free(osk);
 	OBJ_cleanup();
 	apps_shutdown();
 	OPENSSL_EXIT(ret);
 	}
 
-static int do_generate(BIO *bio, char *genstr, char *genconf, BUF_MEM *buf)
-	{
-	CONF *cnf = NULL;
-	int len;
-	long errline;
-	unsigned char *p;
-	ASN1_TYPE *atyp = NULL;
-
-	if (genconf)
-		{
-		cnf = NCONF_new(NULL);
-		if (!NCONF_load(cnf, genconf, &errline))
-			goto conferr;
-		if (!genstr)
-			genstr = NCONF_get_string(cnf, "default", "asn1");
-		if (!genstr)
-			{
-			BIO_printf(bio, "Can't find 'asn1' in '%s'\n", genconf);
-			goto err;
-			}
-		}
-
-	atyp = ASN1_generate_nconf(genstr, cnf);
-	NCONF_free(cnf);
-
-	if (!atyp)
-		return -1;
-
-	len = i2d_ASN1_TYPE(atyp, NULL);
-
-	if (len <= 0)
-		goto err;
-
-	if (!BUF_MEM_grow(buf,len))
-		goto err;
-
-	p=(unsigned char *)buf->data;
-
-	i2d_ASN1_TYPE(atyp, &p);
-
-	ASN1_TYPE_free(atyp);
-	return len;
-
-	conferr:
-
-	if (errline > 0)
-		BIO_printf(bio, "Error on line %ld of config file '%s'\n",
-							errline, genconf);
-	else
-		BIO_printf(bio, "Error loading config file '%s'\n", genconf);
-
-	err:
-	NCONF_free(cnf);
-	ASN1_TYPE_free(atyp);
-
-	return -1;
-
-	}

apps/ca.c

@@ -63,6 +63,7 @@
 #include <string.h>
 #include <ctype.h>
 #include <sys/types.h>
+#include <sys/stat.h>
 #include <openssl/conf.h>
 #include <openssl/bio.h>
 #include <openssl/err.h>
@@ -82,7 +83,7 @@
 #    else
 #      include <unixlib.h>
 #    endif
-#  elif !defined(OPENSSL_SYS_VXWORKS) && !defined(OPENSSL_SYS_WINDOWS) && !defined(OPENSSL_SYS_NETWARE)
+#  elif !defined(OPENSSL_SYS_VXWORKS) && !defined(OPENSSL_SYS_WINDOWS)
 #    include <sys/file.h>
 #  endif
 #endif
@@ -104,9 +105,6 @@
 
 #define ENV_DEFAULT_CA		"default_ca"
 
-#define STRING_MASK	"string_mask"
-#define UTF8_IN			"utf8"
-
 #define ENV_DIR			"dir"
 #define ENV_CERTS		"certs"
 #define ENV_CRL_DIR		"crl_dir"
@@ -133,7 +131,6 @@
 #define ENV_NAMEOPT		"name_opt"
 #define ENV_CERTOPT		"cert_opt"
 #define ENV_EXTCOPY		"copy_extensions"
-#define ENV_UNIQUE_SUBJECT	"unique_subject"
 
 #define ENV_DATABASE		"database"
 
@@ -145,7 +142,7 @@
 #define REV_KEY_COMPROMISE	3	/* Value is cert key compromise time */
 #define REV_CA_COMPROMISE	4	/* Value is CA key compromise time */
 
-static const char *ca_usage[]={
+static char *ca_usage[]={
 "usage: ca args\n",
 "\n",
 " -verbose        - Talk alot while doing things\n",
@@ -163,7 +160,6 @@ static const char *ca_usage[]={
 " -keyform arg    - private key file format (PEM or ENGINE)\n",
 " -key arg        - key to decode the private key if it is encrypted\n",
 " -cert file      - The CA certificate\n",
-" -selfsign       - sign a certificate with the key associated with it\n",
 " -in file        - The input PEM encoded certificate request(s)\n",
 " -out file       - Where to put the output file(s)\n",
 " -outdir dir     - Where to put output certificates\n",
@@ -176,8 +172,6 @@ static const char *ca_usage[]={
 " -msie_hack      - msie modifications to handle all those universal strings\n",
 " -revoke file    - Revoke a certificate (given in file)\n",
 " -subj arg       - Use arg instead of request's subject\n",
-" -utf8           - input characters are UTF8 (default ASCII)\n",
-" -multivalue-rdn - enable support for multivalued RDNs\n",
 " -extensions ..  - Extension section (override value in config file)\n",
 " -extfile file   - Configuration file with X509v3 extentions to add\n",
 " -crlexts ..     - CRL extension section (override value in config file)\n",
@@ -195,39 +189,40 @@ extern int EF_PROTECT_BELOW;
 extern int EF_ALIGNMENT;
 #endif
 
-static void lookup_fail(const char *name, const char *tag);
+static void lookup_fail(char *name,char *tag);
 static int certify(X509 **xret, char *infile,EVP_PKEY *pkey,X509 *x509,
 		   const EVP_MD *dgst,STACK_OF(CONF_VALUE) *policy,CA_DB *db,
-		   BIGNUM *serial, char *subj,unsigned long chtype, int multirdn, int email_dn, char *startdate,
+		   BIGNUM *serial, char *subj, int email_dn, char *startdate,
 		   char *enddate, long days, int batch, char *ext_sect, CONF *conf,
 		   int verbose, unsigned long certopt, unsigned long nameopt,
-		   int default_op, int ext_copy, int selfsign);
+		   int default_op, int ext_copy);
 static int certify_cert(X509 **xret, char *infile,EVP_PKEY *pkey,X509 *x509,
 			const EVP_MD *dgst,STACK_OF(CONF_VALUE) *policy,
-			CA_DB *db, BIGNUM *serial, char *subj,unsigned long chtype, int multirdn, int email_dn,
+			CA_DB *db, BIGNUM *serial, char *subj, int email_dn,
 			char *startdate, char *enddate, long days, int batch,
 			char *ext_sect, CONF *conf,int verbose, unsigned long certopt,
 			unsigned long nameopt, int default_op, int ext_copy,
 			ENGINE *e);
 static int certify_spkac(X509 **xret, char *infile,EVP_PKEY *pkey,X509 *x509,
 			 const EVP_MD *dgst,STACK_OF(CONF_VALUE) *policy,
-			 CA_DB *db, BIGNUM *serial,char *subj,unsigned long chtype, int multirdn, int email_dn,
+			 CA_DB *db, BIGNUM *serial,char *subj, int email_dn,
 			 char *startdate, char *enddate, long days, char *ext_sect,
 			 CONF *conf, int verbose, unsigned long certopt, 
 			 unsigned long nameopt, int default_op, int ext_copy);
+static int fix_data(int nid, int *type);
 static void write_new_certificate(BIO *bp, X509 *x, int output_der, int notext);
 static int do_body(X509 **xret, EVP_PKEY *pkey, X509 *x509, const EVP_MD *dgst,
-	STACK_OF(CONF_VALUE) *policy, CA_DB *db, BIGNUM *serial,char *subj,unsigned long chtype, int multirdn,
+	STACK_OF(CONF_VALUE) *policy, CA_DB *db, BIGNUM *serial,char *subj,
 	int email_dn, char *startdate, char *enddate, long days, int batch,
        	int verbose, X509_REQ *req, char *ext_sect, CONF *conf,
 	unsigned long certopt, unsigned long nameopt, int default_op,
-	int ext_copy, int selfsign);
+	int ext_copy);
 static int do_revoke(X509 *x509, CA_DB *db, int ext, char *extval);
 static int get_certificate_status(const char *ser_status, CA_DB *db);
 static int do_updatedb(CA_DB *db);
-static int check_time_format(const char *str);
+static int check_time_format(char *str);
 char *make_revocation_str(int rev_type, char *rev_arg);
-int make_revoked(X509_REVOKED *rev, const char *str);
+int make_revoked(X509_REVOKED *rev, char *str);
 int old_entry_print(BIO *bp, ASN1_OBJECT *obj, ASN1_STRING *str);
 static CONF *conf=NULL;
 static CONF *extconf=NULL;
@@ -257,7 +252,6 @@ int MAIN(int argc, char **argv)
 	int doupdatedb=0;
 	long crldays=0;
 	long crlhours=0;
-	long crlsec=0;
 	long errorline= -1;
 	char *configfile=NULL;
 	char *md=NULL;
@@ -278,8 +272,6 @@ int MAIN(int argc, char **argv)
 	char *extensions=NULL;
 	char *extfile=NULL;
 	char *subj=NULL;
-	unsigned long chtype = MBSTRING_ASC;
-	int multirdn = 0;
 	char *tmp_email_dn=NULL;
 	char *crl_ext=NULL;
 	int rev_type = REV_NONE;
@@ -294,8 +286,7 @@ int MAIN(int argc, char **argv)
 	unsigned long nameopt = 0, certopt = 0;
 	int default_op = 1;
 	int ext_copy = EXT_COPY_NONE;
-	int selfsign = 0;
-	X509 *x509=NULL, *x509p = NULL;
+	X509 *x509=NULL;
 	X509 *x=NULL;
 	BIO *in=NULL,*out=NULL,*Sout=NULL,*Cout=NULL;
 	char *dbfile=NULL;
@@ -304,9 +295,7 @@ int MAIN(int argc, char **argv)
 	X509_REVOKED *r=NULL;
 	ASN1_TIME *tmptm;
 	ASN1_INTEGER *tmpser;
-	char *f;
-	const char *p;
-	char * const *pp;
+	char **pp,*p,*f;
 	int i,j;
 	const EVP_MD *dgst=NULL;
 	STACK_OF(CONF_VALUE) *attribs=NULL;
@@ -361,12 +350,6 @@ EF_ALIGNMENT=0;
 			subj= *(++argv);
 			/* preserve=1; */
 			}
-		else if (strcmp(*argv,"-utf8") == 0)
-			chtype = MBSTRING_UTF8;
-		else if (strcmp(*argv,"-create_serial") == 0)
-			create_ser = 1;
-		else if (strcmp(*argv,"-multivalue-rdn") == 0)
-			multirdn=1;
 		else if (strcmp(*argv,"-startdate") == 0)
 			{
 			if (--argc < 1) goto bad;
@@ -417,8 +400,6 @@ EF_ALIGNMENT=0;
 			if (--argc < 1) goto bad;
 			certfile= *(++argv);
 			}
-		else if (strcmp(*argv,"-selfsign") == 0)
-			selfsign=1;
 		else if (strcmp(*argv,"-in") == 0)
 			{
 			if (--argc < 1) goto bad;
@@ -457,11 +438,6 @@ EF_ALIGNMENT=0;
 			if (--argc < 1) goto bad;
 			crlhours= atol(*(++argv));
 			}
-		else if (strcmp(*argv,"-crlsec") == 0)
-			{
-			if (--argc < 1) goto bad;
-			crlsec = atol(*(++argv));
-			}
 		else if (strcmp(*argv,"-infiles") == 0)
 			{
 			argc--;
@@ -555,10 +531,8 @@ bad:
 
 	if (badops)
 		{
-		const char **pp2;
-
-		for (pp2=ca_usage; (*pp2 != NULL); pp2++)
-			BIO_printf(bio_err,"%s",*pp2);
+		for (pp=ca_usage; (*pp != NULL); pp++)
+			BIO_printf(bio_err,"%s",*pp);
 		goto err;
 		}
 
@@ -659,31 +633,29 @@ bad:
 		ERR_clear_error();
 	app_RAND_load_file(randfile, bio_err, 0);
 
-	f = NCONF_get_string(conf, section, STRING_MASK);
-	if (!f)
-		ERR_clear_error();
-
-	if(f && !ASN1_STRING_set_default_mask_asc(f)) {
-		BIO_printf(bio_err, "Invalid global string mask setting %s\n", f);
-		goto err;
-	}
-
-	if (chtype != MBSTRING_UTF8){
-		f = NCONF_get_string(conf, section, UTF8_IN);
-		if (!f)
-			ERR_clear_error();
-		else if (!strcmp(f, "yes"))
-			chtype = MBSTRING_UTF8;
-	}
-
 	db_attr.unique_subject = 1;
-	p = NCONF_get_string(conf, section, ENV_UNIQUE_SUBJECT);
+	p = NCONF_get_string(conf, section, "unique_subject");
 	if (p)
 		{
 #ifdef RL_DEBUG
 		BIO_printf(bio_err, "DEBUG: unique_subject = \"%s\"\n", p);
 #endif
-		db_attr.unique_subject = parse_yesno(p,1);
+		switch(*p)
+			{
+		case 'f': /* false */
+		case 'F': /* FALSE */
+		case 'n': /* no */
+		case 'N': /* NO */
+			db_attr.unique_subject = 0;
+			break;
+		case 't': /* true */
+		case 'T': /* TRUE */
+		case 'y': /* yes */
+		case 'Y': /* YES */
+		default:
+			db_attr.unique_subject = 1;
+			break;
+			}
 		}
 	else
 		ERR_clear_error();
@@ -727,7 +699,7 @@ bad:
 	}
 
 	/*****************************************************************/
-	/* we definitely need a private key, so let's get it */
+	/* we definitely need a public key, so let's get it */
 
 	if ((keyfile == NULL) && ((keyfile=NCONF_get_string(conf,
 		section,ENV_PRIVATE_KEY)) == NULL))
@@ -755,27 +727,22 @@ bad:
 
 	/*****************************************************************/
 	/* we need a certificate */
-	if (!selfsign || spkac_file || ss_cert_file || gencrl)
+	if ((certfile == NULL) && ((certfile=NCONF_get_string(conf,
+		section,ENV_CERTIFICATE)) == NULL))
 		{
-		if ((certfile == NULL)
-			&& ((certfile=NCONF_get_string(conf,
-				     section,ENV_CERTIFICATE)) == NULL))
-			{
-			lookup_fail(section,ENV_CERTIFICATE);
-			goto err;
-			}
-		x509=load_cert(bio_err, certfile, FORMAT_PEM, NULL, e,
-			"CA certificate");
-		if (x509 == NULL)
-			goto err;
-
-		if (!X509_check_private_key(x509,pkey))
-			{
-			BIO_printf(bio_err,"CA certificate and CA private key do not match\n");
-			goto err;
-			}
+		lookup_fail(section,ENV_CERTIFICATE);
+		goto err;
+		}
+	x509=load_cert(bio_err, certfile, FORMAT_PEM, NULL, e,
+		"CA certificate");
+	if (x509 == NULL)
+		goto err;
+
+	if (!X509_check_private_key(x509,pkey))
+		{
+		BIO_printf(bio_err,"CA certificate and CA private key do not match\n");
+		goto err;
 		}
-	if (!selfsign) x509p = x509;
 
 	f=NCONF_get_string(conf,BASE_SECTION,ENV_PRESERVE);
 	if (f == NULL)
@@ -833,6 +800,7 @@ bad:
 	/* lookup where to write new certificates */
 	if ((outdir == NULL) && (req))
 		{
+		struct stat sb;
 
 		if ((outdir=NCONF_get_string(conf,section,ENV_NEW_CERTS_DIR))
 			== NULL)
@@ -851,23 +819,27 @@ bad:
 	       that to access().  However, time's too short to do that just
 	       now.
 	    */
-#ifndef _WIN32
 		if (access(outdir,R_OK|W_OK|X_OK) != 0)
-#else
-		if (_access(outdir,R_OK|W_OK|X_OK) != 0)
-#endif
 			{
 			BIO_printf(bio_err,"I am unable to access the %s directory\n",outdir);
 			perror(outdir);
 			goto err;
 			}
 
-		if (app_isdir(outdir)<=0)
+		if (stat(outdir,&sb) != 0)
+			{
+			BIO_printf(bio_err,"unable to stat(%s)\n",outdir);
+			perror(outdir);
+			goto err;
+			}
+#ifdef S_IFDIR
+		if (!(sb.st_mode & S_IFDIR))
 			{
 			BIO_printf(bio_err,"%s need to be a directory\n",outdir);
 			perror(outdir);
 			goto err;
 			}
+#endif
 #endif
 		}
 
@@ -882,9 +854,9 @@ bad:
 	if (db == NULL) goto err;
 
 	/* Lets check some fields */
-	for (i=0; i<sk_OPENSSL_PSTRING_num(db->db->data); i++)
+	for (i=0; i<sk_num(db->db->data); i++)
 		{
-		pp=sk_OPENSSL_PSTRING_value(db->db->data,i);
+		pp=(char **)sk_value(db->db->data,i);
 		if ((pp[DB_type][0] != DB_TYPE_REV) &&
 			(pp[DB_rev_date][0] != '\0'))
 			{
@@ -897,7 +869,7 @@ bad:
 			BIO_printf(bio_err," in entry %d\n", i+1);
 			goto err;
 			}
-		if (!check_time_format((char *)pp[DB_exp_date]))
+		if (!check_time_format(pp[DB_exp_date]))
 			{
 			BIO_printf(bio_err,"entry %d: invalid expiry date\n",i+1);
 			goto err;
@@ -937,7 +909,7 @@ bad:
 #endif
 		TXT_DB_write(out,db->db);
 		BIO_printf(bio_err,"%d entries loaded from the database\n",
-			   sk_OPENSSL_PSTRING_num(db->db->data));
+			db->db->data->num);
 		BIO_printf(bio_err,"generating index\n");
 		}
 	
@@ -1028,17 +1000,6 @@ bad:
 		goto err;
 		}
 
-	if (!strcmp(md, "default"))
-		{
-		int def_nid;
-		if (EVP_PKEY_get_default_digest_nid(pkey, &def_nid) <= 0)
-			{
-			BIO_puts(bio_err,"no default digest\n");
-			goto err;
-			}
-		md = (char *)OBJ_nid2sn(def_nid);
-		}
-
 	if ((dgst=EVP_get_digestbyname(md)) == NULL)
 		{
 		BIO_printf(bio_err,"%s is an unsupported message digest type\n",md);
@@ -1108,9 +1069,9 @@ bad:
 			if (startdate == NULL)
 				ERR_clear_error();
 			}
-		if (startdate && !ASN1_TIME_set_string(NULL, startdate))
+		if (startdate && !ASN1_UTCTIME_set_string(NULL,startdate))
 			{
-			BIO_printf(bio_err,"start date is invalid, it should be YYMMDDHHMMSSZ or YYYYMMDDHHMMSSZ\n");
+			BIO_printf(bio_err,"start date is invalid, it should be YYMMDDHHMMSSZ\n");
 			goto err;
 			}
 		if (startdate == NULL) startdate="today";
@@ -1122,9 +1083,9 @@ bad:
 			if (enddate == NULL)
 				ERR_clear_error();
 			}
-		if (enddate && !ASN1_TIME_set_string(NULL, enddate))
+		if (enddate && !ASN1_UTCTIME_set_string(NULL,enddate))
 			{
-			BIO_printf(bio_err,"end date is invalid, it should be YYMMDDHHMMSSZ or YYYYMMDDHHMMSSZ\n");
+			BIO_printf(bio_err,"end date is invalid, it should be YYMMDDHHMMSSZ\n");
 			goto err;
 			}
 
@@ -1171,7 +1132,7 @@ bad:
 			{
 			total++;
 			j=certify_spkac(&x,spkac_file,pkey,x509,dgst,attribs,db,
-				serial,subj,chtype,multirdn,email_dn,startdate,enddate,days,extensions,
+				serial,subj,email_dn,startdate,enddate,days,extensions,
 				conf,verbose,certopt,nameopt,default_op,ext_copy);
 			if (j < 0) goto err;
 			if (j > 0)
@@ -1195,7 +1156,7 @@ bad:
 			{
 			total++;
 			j=certify_cert(&x,ss_cert_file,pkey,x509,dgst,attribs,
-				db,serial,subj,chtype,multirdn,email_dn,startdate,enddate,days,batch,
+				db,serial,subj,email_dn,startdate,enddate,days,batch,
 				extensions,conf,verbose, certopt, nameopt,
 				default_op, ext_copy, e);
 			if (j < 0) goto err;
@@ -1214,10 +1175,10 @@ bad:
 		if (infile != NULL)
 			{
 			total++;
-			j=certify(&x,infile,pkey,x509p,dgst,attribs,db,
-				serial,subj,chtype,multirdn,email_dn,startdate,enddate,days,batch,
+			j=certify(&x,infile,pkey,x509,dgst,attribs,db,
+				serial,subj,email_dn,startdate,enddate,days,batch,
 				extensions,conf,verbose, certopt, nameopt,
-				default_op, ext_copy, selfsign);
+				default_op, ext_copy);
 			if (j < 0) goto err;
 			if (j > 0)
 				{
@@ -1234,10 +1195,10 @@ bad:
 		for (i=0; i<argc; i++)
 			{
 			total++;
-			j=certify(&x,argv[i],pkey,x509p,dgst,attribs,db,
-				serial,subj,chtype,multirdn,email_dn,startdate,enddate,days,batch,
+			j=certify(&x,argv[i],pkey,x509,dgst,attribs,db,
+				serial,subj,email_dn,startdate,enddate,days,batch,
 				extensions,conf,verbose, certopt, nameopt,
-				default_op, ext_copy, selfsign);
+				default_op, ext_copy);
 			if (j < 0) goto err;
 			if (j > 0)
 				{
@@ -1262,12 +1223,7 @@ bad:
 				BIO_printf(bio_err,"\n%d out of %d certificate requests certified, commit? [y/n]",total_done,total);
 				(void)BIO_flush(bio_err);
 				buf[0][0]='\0';
-				if (!fgets(buf[0],10,stdin))
-					{
-					BIO_printf(bio_err,"CERTIFICATION CANCELED: I/O error\n"); 
-					ret=0;
-					goto err;
-					}
+				fgets(buf[0],10,stdin);
 				if ((buf[0][0] != 'y') && (buf[0][0] != 'Y'))
 					{
 					BIO_printf(bio_err,"CERTIFICATION CANCELED\n"); 
@@ -1293,7 +1249,7 @@ bad:
 			x=sk_X509_value(cert_sk,i);
 
 			j=x->cert_info->serialNumber->length;
-			p=(const char *)x->cert_info->serialNumber->data;
+			p=(char *)x->cert_info->serialNumber->data;
 			
 			if(strlen(outdir) >= (size_t)(j ? BSIZE-j*2-6 : BSIZE-8))
 				{
@@ -1384,7 +1340,7 @@ bad:
 				goto err;
 				}
 
-		if (!crldays && !crlhours && !crlsec)
+		if (!crldays && !crlhours)
 			{
 			if (!NCONF_get_number(conf,section,
 				ENV_DEFAULT_CRL_DAYS, &crldays))
@@ -1393,7 +1349,7 @@ bad:
 				ENV_DEFAULT_CRL_HOURS, &crlhours))
 				crlhours = 0;
 			}
-		if ((crldays == 0) && (crlhours == 0) && (crlsec == 0))
+		if ((crldays == 0) && (crlhours == 0))
 			{
 			BIO_printf(bio_err,"cannot lookup how long until the next CRL is issued\n");
 			goto err;
@@ -1407,19 +1363,14 @@ bad:
 		if (!tmptm) goto err;
 		X509_gmtime_adj(tmptm,0);
 		X509_CRL_set_lastUpdate(crl, tmptm);	
-		if (!X509_time_adj_ex(tmptm, crldays, crlhours*60*60 + crlsec,
-			NULL))
-			{
-			BIO_puts(bio_err, "error setting CRL nextUpdate\n");
-			goto err;
-			}
+		X509_gmtime_adj(tmptm,(crldays*24+crlhours)*60*60);
 		X509_CRL_set_nextUpdate(crl, tmptm);	
 
 		ASN1_TIME_free(tmptm);
 
-		for (i=0; i<sk_OPENSSL_PSTRING_num(db->db->data); i++)
+		for (i=0; i<sk_num(db->db->data); i++)
 			{
-			pp=sk_OPENSSL_PSTRING_value(db->db->data,i);
+			pp=(char **)sk_value(db->db->data,i);
 			if (pp[DB_type][0] == DB_TYPE_REV)
 				{
 				if ((r=X509_REVOKED_new()) == NULL) goto err;
@@ -1445,6 +1396,10 @@ bad:
 
 		/* we now have a CRL */
 		if (verbose) BIO_printf(bio_err,"signing CRL\n");
+#ifndef OPENSSL_NO_DSA
+		if (pkey->type == EVP_PKEY_DSA) 
+			dgst=EVP_dss1();
+#endif
 
 		/* Add any extensions asked for */
 
@@ -1477,12 +1432,6 @@ bad:
 		if (crlnumberfile != NULL)	/* we have a CRL number that need updating */
 			if (!save_serial(crlnumberfile,"new",crlnumber,NULL)) goto err;
 
-		if (crlnumber)
-			{
-			BN_free(crlnumber);
-			crlnumber = NULL;
-			}
-
 		if (!X509_CRL_sign(crl,pkey,dgst)) goto err;
 
 		PEM_write_bio_X509_CRL(Sout,crl);
@@ -1535,29 +1484,27 @@ err:
 	if (free_key && key)
 		OPENSSL_free(key);
 	BN_free(serial);
-	BN_free(crlnumber);
 	free_index(db);
 	EVP_PKEY_free(pkey);
-	if (x509) X509_free(x509);
+	X509_free(x509);
 	X509_CRL_free(crl);
 	NCONF_free(conf);
-	NCONF_free(extconf);
 	OBJ_cleanup();
 	apps_shutdown();
 	OPENSSL_EXIT(ret);
 	}
 
-static void lookup_fail(const char *name, const char *tag)
+static void lookup_fail(char *name, char *tag)
 	{
 	BIO_printf(bio_err,"variable lookup failed for %s::%s\n",name,tag);
 	}
 
 static int certify(X509 **xret, char *infile, EVP_PKEY *pkey, X509 *x509,
 	     const EVP_MD *dgst, STACK_OF(CONF_VALUE) *policy, CA_DB *db,
-	     BIGNUM *serial, char *subj,unsigned long chtype, int multirdn, int email_dn, char *startdate, char *enddate,
+	     BIGNUM *serial, char *subj, int email_dn, char *startdate, char *enddate,
 	     long days, int batch, char *ext_sect, CONF *lconf, int verbose,
 	     unsigned long certopt, unsigned long nameopt, int default_op,
-	     int ext_copy, int selfsign)
+	     int ext_copy)
 	{
 	X509_REQ *req=NULL;
 	BIO *in=NULL;
@@ -1582,12 +1529,6 @@ static int certify(X509 **xret, char *infile, EVP_PKEY *pkey, X509 *x509,
 
 	BIO_printf(bio_err,"Check that the request matches the signature\n");
 
-	if (selfsign && !X509_REQ_check_private_key(req,pkey))
-		{
-		BIO_printf(bio_err,"Certificate request and CA private key do not match\n");
-		ok=0;
-		goto err;
-		}
 	if ((pktmp=X509_REQ_get_pubkey(req)) == NULL)
 		{
 		BIO_printf(bio_err,"error unpacking public key\n");
@@ -1610,9 +1551,9 @@ static int certify(X509 **xret, char *infile, EVP_PKEY *pkey, X509 *x509,
 	else
 		BIO_printf(bio_err,"Signature ok\n");
 
-	ok=do_body(xret,pkey,x509,dgst,policy,db,serial,subj,chtype,multirdn, email_dn,
+	ok=do_body(xret,pkey,x509,dgst,policy,db,serial,subj, email_dn,
 		startdate,enddate,days,batch,verbose,req,ext_sect,lconf,
-		certopt, nameopt, default_op, ext_copy, selfsign);
+		certopt, nameopt, default_op, ext_copy);
 
 err:
 	if (req != NULL) X509_REQ_free(req);
@@ -1622,7 +1563,7 @@ err:
 
 static int certify_cert(X509 **xret, char *infile, EVP_PKEY *pkey, X509 *x509,
 	     const EVP_MD *dgst, STACK_OF(CONF_VALUE) *policy, CA_DB *db,
-	     BIGNUM *serial, char *subj, unsigned long chtype, int multirdn, int email_dn, char *startdate, char *enddate,
+	     BIGNUM *serial, char *subj, int email_dn, char *startdate, char *enddate,
 	     long days, int batch, char *ext_sect, CONF *lconf, int verbose,
 	     unsigned long certopt, unsigned long nameopt, int default_op,
 	     int ext_copy, ENGINE *e)
@@ -1664,9 +1605,9 @@ static int certify_cert(X509 **xret, char *infile, EVP_PKEY *pkey, X509 *x509,
 	if ((rreq=X509_to_X509_REQ(req,NULL,EVP_md5())) == NULL)
 		goto err;
 
-	ok=do_body(xret,pkey,x509,dgst,policy,db,serial,subj,chtype,multirdn,email_dn,startdate,enddate,
+	ok=do_body(xret,pkey,x509,dgst,policy,db,serial,subj,email_dn,startdate,enddate,
 		days,batch,verbose,rreq,ext_sect,lconf, certopt, nameopt, default_op,
-		ext_copy, 0);
+		ext_copy);
 
 err:
 	if (rreq != NULL) X509_REQ_free(rreq);
@@ -1676,11 +1617,10 @@ err:
 
 static int do_body(X509 **xret, EVP_PKEY *pkey, X509 *x509, const EVP_MD *dgst,
 	     STACK_OF(CONF_VALUE) *policy, CA_DB *db, BIGNUM *serial, char *subj,
-	     unsigned long chtype, int multirdn,
 	     int email_dn, char *startdate, char *enddate, long days, int batch,
 	     int verbose, X509_REQ *req, char *ext_sect, CONF *lconf,
 	     unsigned long certopt, unsigned long nameopt, int default_op,
-	     int ext_copy, int selfsign)
+	     int ext_copy)
 	{
 	X509_NAME *name=NULL,*CAname=NULL,*subject=NULL, *dn_subject=NULL;
 	ASN1_UTCTIME *tm,*tmptm;
@@ -1692,11 +1632,9 @@ static int do_body(X509 **xret, EVP_PKEY *pkey, X509 *x509, const EVP_MD *dgst,
 	X509_NAME_ENTRY *tne,*push;
 	EVP_PKEY *pktmp;
 	int ok= -1,i,j,last,nid;
-	const char *p;
+	char *p;
 	CONF_VALUE *cv;
-	OPENSSL_STRING row[DB_NUMBER];
-	OPENSSL_STRING *irow=NULL;
-	OPENSSL_STRING *rrow=NULL;
+	char *row[DB_NUMBER],**rrow=NULL,**irow=NULL;
 	char buf[25];
 
 	tmptm=ASN1_UTCTIME_new();
@@ -1711,7 +1649,7 @@ static int do_body(X509 **xret, EVP_PKEY *pkey, X509 *x509, const EVP_MD *dgst,
 
 	if (subj)
 		{
-		X509_NAME *n = parse_name(subj, chtype, multirdn);
+		X509_NAME *n = do_subject(subj, MBSTRING_ASC);
 
 		if (!n)
 			{
@@ -1786,10 +1724,7 @@ static int do_body(X509 **xret, EVP_PKEY *pkey, X509 *x509, const EVP_MD *dgst,
 		}
 
 	/* take a copy of the issuer name before we mess with it. */
-	if (selfsign)
-		CAname=X509_NAME_dup(name);
-	else
-		CAname=X509_NAME_dup(x509->cert_info->subject);
+	CAname=X509_NAME_dup(x509->cert_info->subject);
 	if (CAname == NULL) goto err;
 	str=str2=NULL;
 
@@ -1938,9 +1873,7 @@ again2:
 
 	if (db->attributes.unique_subject)
 		{
-		OPENSSL_STRING *crow=row;
-
-		rrow=TXT_DB_get_by_index(db->db,DB_name,crow);
+		rrow=TXT_DB_get_by_index(db->db,DB_name,row);
 		if (rrow != NULL)
 			{
 			BIO_printf(bio_err,
@@ -2003,24 +1936,16 @@ again2:
 
 	if (BN_to_ASN1_INTEGER(serial,ci->serialNumber) == NULL)
 		goto err;
-	if (selfsign)
-		{
-		if (!X509_set_issuer_name(ret,subject))
-			goto err;
-		}
-	else
-		{
-		if (!X509_set_issuer_name(ret,X509_get_subject_name(x509)))
-			goto err;
-		}
+	if (!X509_set_issuer_name(ret,X509_get_subject_name(x509)))
+		goto err;
 
 	if (strcmp(startdate,"today") == 0)
 		X509_gmtime_adj(X509_get_notBefore(ret),0);
-	else ASN1_TIME_set_string(X509_get_notBefore(ret),startdate);
+	else ASN1_UTCTIME_set_string(X509_get_notBefore(ret),startdate);
 
 	if (enddate == NULL)
-		X509_time_adj_ex(X509_get_notAfter(ret),days, 0, NULL);
-	else ASN1_TIME_set_string(X509_get_notAfter(ret),enddate);
+		X509_gmtime_adj(X509_get_notAfter(ret),(long)60*60*24*days);
+	else ASN1_UTCTIME_set_string(X509_get_notAfter(ret),enddate);
 
 	if (!X509_set_subject_name(ret,subject)) goto err;
 
@@ -2047,10 +1972,7 @@ again2:
 		ci->extensions = NULL;
 
 		/* Initialize the context structure */
-		if (selfsign)
-			X509V3_set_ctx(&ctx, ret, ret, req, NULL, 0);
-		else
-			X509V3_set_ctx(&ctx, x509, ret, req, NULL, 0);
+		X509V3_set_ctx(&ctx, x509, ret, req, NULL, 0);
 
 		if (extconf)
 			{
@@ -2116,8 +2038,8 @@ again2:
 		}
 
 	BIO_printf(bio_err,"Certificate is to be certified until ");
-	ASN1_TIME_print(bio_err,X509_get_notAfter(ret));
-	if (days) BIO_printf(bio_err," (%ld days)",days);
+	ASN1_UTCTIME_print(bio_err,X509_get_notAfter(ret));
+	if (days) BIO_printf(bio_err," (%d days)",days);
 	BIO_printf(bio_err, "\n");
 
 	if (!batch)
@@ -2126,12 +2048,7 @@ again2:
 		BIO_printf(bio_err,"Sign the certificate? [y/n]:");
 		(void)BIO_flush(bio_err);
 		buf[0]='\0';
-		if (!fgets(buf,sizeof(buf)-1,stdin))
-			{
-			BIO_printf(bio_err,"CERTIFICATE WILL NOT BE CERTIFIED: I/O error\n");
-			ok=0;
-			goto err;
-			}
+		fgets(buf,sizeof(buf)-1,stdin);
 		if (!((buf[0] == 'y') || (buf[0] == 'Y')))
 			{
 			BIO_printf(bio_err,"CERTIFICATE WILL NOT BE CERTIFIED\n");
@@ -2140,11 +2057,15 @@ again2:
 			}
 		}
 
+
+#ifndef OPENSSL_NO_DSA
+	if (pkey->type == EVP_PKEY_DSA) dgst=EVP_dss1();
 	pktmp=X509_get_pubkey(ret);
 	if (EVP_PKEY_missing_parameters(pktmp) &&
 		!EVP_PKEY_missing_parameters(pkey))
 		EVP_PKEY_copy_parameters(pktmp,pkey);
 	EVP_PKEY_free(pktmp);
+#endif
 
 	if (!X509_sign(ret,pkey,dgst))
 		goto err;
@@ -2241,12 +2162,12 @@ static void write_new_certificate(BIO *bp, X509 *x, int output_der, int notext)
 
 static int certify_spkac(X509 **xret, char *infile, EVP_PKEY *pkey, X509 *x509,
 	     const EVP_MD *dgst, STACK_OF(CONF_VALUE) *policy, CA_DB *db,
-	     BIGNUM *serial, char *subj,unsigned long chtype, int multirdn, int email_dn, char *startdate, char *enddate,
+	     BIGNUM *serial, char *subj, int email_dn, char *startdate, char *enddate,
 	     long days, char *ext_sect, CONF *lconf, int verbose, unsigned long certopt,
 	     unsigned long nameopt, int default_op, int ext_copy)
 	{
 	STACK_OF(CONF_VALUE) *sk=NULL;
-	LHASH_OF(CONF_VALUE) *parms=NULL;
+	LHASH *parms=NULL;
 	X509_REQ *req=NULL;
 	CONF_VALUE *cv=NULL;
 	NETSCAPE_SPKI *spki = NULL;
@@ -2333,9 +2254,25 @@ static int certify_spkac(X509 **xret, char *infile, EVP_PKEY *pkey, X509 *x509,
 			continue;
 			}
 
-		if (!X509_NAME_add_entry_by_NID(n, nid, chtype,
-				(unsigned char *)buf, -1, -1, 0))
+		/*
+		if ((nid == NID_pkcs9_emailAddress) && (email_dn == 0))
+			continue;
+		*/
+		
+		j=ASN1_PRINTABLE_type((unsigned char *)buf,-1);
+		if (fix_data(nid, &j) == 0)
+			{
+			BIO_printf(bio_err,
+				"invalid characters in string %s\n",buf);
 			goto err;
+			}
+
+		if ((ne=X509_NAME_ENTRY_create_by_NID(&ne,nid,j,
+			(unsigned char *)buf,
+			strlen(buf))) == NULL)
+			goto err;
+
+		if (!X509_NAME_add_entry(n,ne,-1, 0)) goto err;
 		}
 	if (spki == NULL)
 		{
@@ -2366,9 +2303,9 @@ static int certify_spkac(X509 **xret, char *infile, EVP_PKEY *pkey, X509 *x509,
 
 	X509_REQ_set_pubkey(req,pktmp);
 	EVP_PKEY_free(pktmp);
-	ok=do_body(xret,pkey,x509,dgst,policy,db,serial,subj,chtype,multirdn,email_dn,startdate,enddate,
+	ok=do_body(xret,pkey,x509,dgst,policy,db,serial,subj,email_dn,startdate,enddate,
 		   days,1,verbose,req,ext_sect,lconf, certopt, nameopt, default_op,
-			ext_copy, 0);
+			ext_copy);
 err:
 	if (req != NULL) X509_REQ_free(req);
 	if (parms != NULL) CONF_free(parms);
@@ -2378,9 +2315,29 @@ err:
 	return(ok);
 	}
 
-static int check_time_format(const char *str)
+static int fix_data(int nid, int *type)
 	{
-	return ASN1_TIME_set_string(NULL, str);
+	if (nid == NID_pkcs9_emailAddress)
+		*type=V_ASN1_IA5STRING;
+	if ((nid == NID_commonName) && (*type == V_ASN1_IA5STRING))
+		*type=V_ASN1_T61STRING;
+	if ((nid == NID_pkcs9_challengePassword) && (*type == V_ASN1_IA5STRING))
+		*type=V_ASN1_T61STRING;
+	if ((nid == NID_pkcs9_unstructuredName) && (*type == V_ASN1_T61STRING))
+		return(0);
+	if (nid == NID_pkcs9_unstructuredName)
+		*type=V_ASN1_IA5STRING;
+	return(1);
+	}
+
+static int check_time_format(char *str)
+	{
+	ASN1_UTCTIME tm;
+
+	tm.data=(unsigned char *)str;
+	tm.length=strlen(str);
+	tm.type=V_ASN1_UTCTIME;
+	return(ASN1_UTCTIME_check(&tm));
 	}
 
 static int do_revoke(X509 *x509, CA_DB *db, int type, char *value)
@@ -2395,8 +2352,6 @@ static int do_revoke(X509 *x509, CA_DB *db, int type, char *value)
 		row[i]=NULL;
 	row[DB_name]=X509_NAME_oneline(X509_get_subject_name(x509),NULL,0);
 	bn = ASN1_INTEGER_to_BN(X509_get_serialNumber(x509),NULL);
-	if (!bn)
-		goto err;
 	if (BN_is_zero(bn))
 		row[DB_serial]=BUF_strdup("00");
 	else
@@ -2466,7 +2421,7 @@ static int do_revoke(X509 *x509, CA_DB *db, int type, char *value)
 		goto err;
 
 		}
-	else if (index_name_cmp_noconst(row, rrow))
+	else if (index_name_cmp((const char **)row,(const char **)rrow))
 		{
 		BIO_printf(bio_err,"ERROR:name does not match %s\n",
 			   row[DB_name]);
@@ -2615,9 +2570,9 @@ static int do_updatedb (CA_DB *db)
 	else
 		a_y2k = 0;
 
-	for (i = 0; i < sk_OPENSSL_PSTRING_num(db->db->data); i++)
+	for (i = 0; i < sk_num(db->db->data); i++)
 		{
-		rrow = sk_OPENSSL_PSTRING_value(db->db->data, i);
+		rrow = (char **) sk_value(db->db->data, i);
 
 		if (rrow[DB_type][0] == 'V')
 		 	{
@@ -2661,7 +2616,7 @@ err:
 	return (cnt);
 	}
 
-static const char *crl_reasons[] = {
+static char *crl_reasons[] = {
 	/* CRL reason strings */
 	"unspecified",
 	"keyCompromise",
@@ -2689,8 +2644,7 @@ static const char *crl_reasons[] = {
 
 char *make_revocation_str(int rev_type, char *rev_arg)
 	{
-	char *other = NULL, *str;
-	const char *reason = NULL;
+	char *reason = NULL, *other = NULL, *str;
 	ASN1_OBJECT *otmp;
 	ASN1_UTCTIME *revtm = NULL;
 	int i;
@@ -2784,7 +2738,7 @@ char *make_revocation_str(int rev_type, char *rev_arg)
  */
 
 
-int make_revoked(X509_REVOKED *rev, const char *str)
+int make_revoked(X509_REVOKED *rev, char *str)
 	{
 	char *tmp = NULL;
 	int reason_code = -1;
@@ -2838,6 +2792,129 @@ int make_revoked(X509_REVOKED *rev, const char *str)
 	return ret;
 	}
 
+/*
+ * subject is expected to be in the format /type0=value0/type1=value1/type2=...
+ * where characters may be escaped by \
+ */
+X509_NAME *do_subject(char *subject, long chtype)
+	{
+	size_t buflen = strlen(subject)+1; /* to copy the types and values into. due to escaping, the copy can only become shorter */
+	char *buf = OPENSSL_malloc(buflen);
+	size_t max_ne = buflen / 2 + 1; /* maximum number of name elements */
+	char **ne_types = OPENSSL_malloc(max_ne * sizeof (char *));
+	char **ne_values = OPENSSL_malloc(max_ne * sizeof (char *));
+
+	char *sp = subject, *bp = buf;
+	int i, ne_num = 0;
+
+	X509_NAME *n = NULL;
+	int nid;
+
+	if (!buf || !ne_types || !ne_values)
+	{
+		BIO_printf(bio_err, "malloc error\n");
+		goto error;
+	}
+
+	if (*subject != '/')
+	{
+		BIO_printf(bio_err, "Subject does not start with '/'.\n");
+		goto error;
+	}
+	sp++; /* skip leading / */
+
+	while (*sp)
+		{
+		/* collect type */
+		ne_types[ne_num] = bp;
+		while (*sp)
+			{
+			if (*sp == '\\') /* is there anything to escape in the type...? */
+				{
+				if (*++sp)
+					*bp++ = *sp++;
+				else
+					{
+					BIO_printf(bio_err, "escape character at end of string\n");
+					goto error;
+					}
+				}
+			else if (*sp == '=')
+				{
+				sp++;
+				*bp++ = '\0';
+				break;
+				}
+			else
+				*bp++ = *sp++;
+			}
+		if (!*sp)
+			{
+			BIO_printf(bio_err, "end of string encountered while processing type of subject name element #%d\n", ne_num);
+			goto error;
+			}
+		ne_values[ne_num] = bp;
+		while (*sp)
+			{
+			if (*sp == '\\')
+				{
+				if (*++sp)
+					*bp++ = *sp++;
+				else
+					{
+					BIO_printf(bio_err, "escape character at end of string\n");
+					goto error;
+					}
+				}
+			else if (*sp == '/')
+				{
+				sp++;
+				break;
+				}
+			else
+				*bp++ = *sp++;
+			}
+		*bp++ = '\0';
+		ne_num++;
+		}
+
+	if (!(n = X509_NAME_new()))
+		goto error;
+
+	for (i = 0; i < ne_num; i++)
+		{
+		if ((nid=OBJ_txt2nid(ne_types[i])) == NID_undef)
+			{
+			BIO_printf(bio_err, "Subject Attribute %s has no known NID, skipped\n", ne_types[i]);
+			continue;
+			}
+
+		if (!*ne_values[i])
+			{
+			BIO_printf(bio_err, "No value provided for Subject Attribute %s, skipped\n", ne_types[i]);
+			continue;
+			}
+
+		if (!X509_NAME_add_entry_by_NID(n, nid, chtype, (unsigned char*)ne_values[i], -1,-1,0))
+			goto error;
+		}
+
+	OPENSSL_free(ne_values);
+	OPENSSL_free(ne_types);
+	OPENSSL_free(buf);
+	return n;
+
+error:
+	X509_NAME_free(n);
+	if (ne_values)
+		OPENSSL_free(ne_values);
+	if (ne_types)
+		OPENSSL_free(ne_types);
+	if (buf)
+		OPENSSL_free(buf);
+	return NULL;
+}
+
 int old_entry_print(BIO *bp, ASN1_OBJECT *obj, ASN1_STRING *str)
 	{
 	char buf[25],*pbuf, *p;
@@ -2877,13 +2954,12 @@ int old_entry_print(BIO *bp, ASN1_OBJECT *obj, ASN1_STRING *str)
 	return 1;
 	}
 
-int unpack_revinfo(ASN1_TIME **prevtm, int *preason, ASN1_OBJECT **phold, ASN1_GENERALIZEDTIME **pinvtm, const char *str)
+int unpack_revinfo(ASN1_TIME **prevtm, int *preason, ASN1_OBJECT **phold, ASN1_GENERALIZEDTIME **pinvtm, char *str)
 	{
 	char *tmp = NULL;
 	char *rtime_str, *reason_str = NULL, *arg_str = NULL, *p;
 	int reason_code = -1;
-	int ret = 0;
-	unsigned int i;
+	int i, ret = 0;
 	ASN1_OBJECT *hold = NULL;
 	ASN1_GENERALIZEDTIME *comp_time = NULL;
 	tmp = BUF_strdup(str);

apps/ciphers.c

@@ -69,10 +69,9 @@
 #undef PROG
 #define PROG	ciphers_main
 
-static const char *ciphers_usage[]={
+static char *ciphers_usage[]={
 "usage: ciphers args\n",
-" -v          - verbose mode, a textual listing of the SSL/TLS ciphers in OpenSSL\n",
-" -V          - even more verbose\n",
+" -v          - verbose mode, a textual listing of the ciphers in SSLeay\n",
 " -ssl2       - SSL2 mode\n",
 " -ssl3       - SSL3 mode\n",
 " -tls1       - TLS1 mode\n",
@@ -84,14 +83,14 @@ int MAIN(int, char **);
 int MAIN(int argc, char **argv)
 	{
 	int ret=1,i;
-	int verbose=0,Verbose=0;
-	const char **pp;
+	int verbose=0;
+	char **pp;
 	const char *p;
 	int badops=0;
 	SSL_CTX *ctx=NULL;
 	SSL *ssl=NULL;
 	char *ciphers=NULL;
-	const SSL_METHOD *meth=NULL;
+	SSL_METHOD *meth=NULL;
 	STACK_OF(SSL_CIPHER) *sk;
 	char buf[512];
 	BIO *STDout=NULL;
@@ -115,8 +114,6 @@ int MAIN(int argc, char **argv)
 	STDout = BIO_push(tmpbio, STDout);
 	}
 #endif
-	if (!load_config(bio_err, NULL))
-		goto end;
 
 	argc--;
 	argv++;
@@ -124,8 +121,6 @@ int MAIN(int argc, char **argv)
 		{
 		if (strcmp(*argv,"-v") == 0)
 			verbose=1;
-		else if (strcmp(*argv,"-V") == 0)
-			verbose=Verbose=1;
 #ifndef OPENSSL_NO_SSL2
 		else if (strcmp(*argv,"-ssl2") == 0)
 			meth=SSLv2_client_method();
@@ -184,33 +179,15 @@ int MAIN(int argc, char **argv)
 			}
 		BIO_printf(STDout,"\n");
 		}
-	else /* verbose */
+	else
 		{
 		sk=SSL_get_ciphers(ssl);
 
 		for (i=0; i<sk_SSL_CIPHER_num(sk); i++)
 			{
-			SSL_CIPHER *c;
-
-			c = sk_SSL_CIPHER_value(sk,i);
-			
-			if (Verbose)
-				{
-				unsigned long id = c->id;
-				int id0 = (int)(id >> 24);
-				int id1 = (int)((id >> 16) & 0xffL);
-				int id2 = (int)((id >> 8) & 0xffL);
-				int id3 = (int)(id & 0xffL);
-				
-				if ((id & 0xff000000L) == 0x02000000L)
-					BIO_printf(STDout, "     0x%02X,0x%02X,0x%02X - ", id1, id2, id3); /* SSL2 cipher */
-				else if ((id & 0xff000000L) == 0x03000000L)
-					BIO_printf(STDout, "          0x%02X,0x%02X - ", id2, id3); /* SSL3 cipher */
-				else
-					BIO_printf(STDout, "0x%02X,0x%02X,0x%02X,0x%02X - ", id0, id1, id2, id3); /* whatever */
-				}
-
-			BIO_puts(STDout,SSL_CIPHER_description(c,buf,sizeof buf));
+			BIO_puts(STDout,SSL_CIPHER_description(
+				sk_SSL_CIPHER_value(sk,i),
+				buf,sizeof buf));
 			}
 		}
 

apps/crl.c

@@ -72,7 +72,7 @@
 #undef POSTFIX
 #define	POSTFIX	".rvk"
 
-static const char *crl_usage[]={
+static char *crl_usage[]={
 "usage: crl args\n",
 "\n",
 " -inform arg     - input format - default PEM (DER or PEM)\n",
@@ -85,7 +85,6 @@ static const char *crl_usage[]={
 " -issuer         - print issuer DN\n",
 " -lastupdate     - lastUpdate field\n",
 " -nextupdate     - nextUpdate field\n",
-" -crlnumber      - print CRL number\n",
 " -noout          - no CRL output\n",
 " -CAfile  name   - verify CRL using certificates in file \"name\"\n",
 " -CApath  dir    - verify CRL using certificates in \"dir\"\n",
@@ -108,15 +107,15 @@ int MAIN(int argc, char **argv)
 	int informat,outformat;
 	char *infile=NULL,*outfile=NULL;
 	int hash=0,issuer=0,lastupdate=0,nextupdate=0,noout=0,text=0;
-	int fingerprint = 0, crlnumber = 0;
-	const char **pp;
+	int fingerprint = 0;
+	char **pp;
 	X509_STORE *store = NULL;
 	X509_STORE_CTX ctx;
 	X509_LOOKUP *lookup = NULL;
 	X509_OBJECT xobj;
 	EVP_PKEY *pkey;
 	int do_ver = 0;
-	const EVP_MD *md_alg,*digest=EVP_sha1();
+	const EVP_MD *md_alg,*digest=EVP_md5();
 
 	apps_startup();
 
@@ -207,8 +206,6 @@ int MAIN(int argc, char **argv)
 			noout= ++num;
 		else if (strcmp(*argv,"-fingerprint") == 0)
 			fingerprint= ++num;
-		else if (strcmp(*argv,"-crlnumber") == 0)
-			crlnumber= ++num;
 		else if ((md_alg=EVP_get_digestbyname(*argv + 1)))
 			{
 			/* ok */
@@ -284,21 +281,7 @@ bad:
 				{
 				print_name(bio_out, "issuer=", X509_CRL_get_issuer(x), nmflag);
 				}
-			if (crlnumber == i)
-				{
-				ASN1_INTEGER *crlnum;
-				crlnum = X509_CRL_get_ext_d2i(x, NID_crl_number,
-							      NULL, NULL);
-				BIO_printf(bio_out,"crlNumber=");
-				if (crlnum)
-					{
-					i2a_ASN1_INTEGER(bio_out, crlnum);
-					ASN1_INTEGER_free(crlnum);
-					}
-				else
-					BIO_puts(bio_out, "<NONE>");
-				BIO_printf(bio_out,"\n");
-				}
+
 			if (hash == i)
 				{
 				BIO_printf(bio_out,"%08lx\n",

apps/crl2p7.c

@@ -63,6 +63,7 @@
 #include <stdio.h>
 #include <string.h>
 #include <sys/types.h>
+#include <sys/stat.h>
 #include "apps.h"
 #include <openssl/err.h>
 #include <openssl/evp.h>
@@ -92,7 +93,7 @@ int MAIN(int argc, char **argv)
 	PKCS7 *p7 = NULL;
 	PKCS7_SIGNED *p7s = NULL;
 	X509_CRL *crl=NULL;
-	STACK_OF(OPENSSL_STRING) *certflst=NULL;
+	STACK *certflst=NULL;
 	STACK_OF(X509_CRL) *crl_stack=NULL;
 	STACK_OF(X509) *cert_stack=NULL;
 	int ret=1,nocrl=0;
@@ -140,8 +141,8 @@ int MAIN(int argc, char **argv)
 		else if (strcmp(*argv,"-certfile") == 0)
 			{
 			if (--argc < 1) goto bad;
-			if(!certflst) certflst = sk_OPENSSL_STRING_new_null();
-			sk_OPENSSL_STRING_push(certflst,*(++argv));
+			if(!certflst) certflst = sk_new_null();
+			sk_push(certflst,*(++argv));
 			}
 		else
 			{
@@ -226,8 +227,8 @@ bad:
 	if ((cert_stack=sk_X509_new_null()) == NULL) goto end;
 	p7s->cert=cert_stack;
 
-	if(certflst) for(i = 0; i < sk_OPENSSL_STRING_num(certflst); i++) {
-		certfile = sk_OPENSSL_STRING_value(certflst, i);
+	if(certflst) for(i = 0; i < sk_num(certflst); i++) {
+		certfile = sk_value(certflst, i);
 		if (add_certs_from_file(cert_stack,certfile) < 0)
 			{
 			BIO_printf(bio_err, "error loading certificates\n");
@@ -236,7 +237,7 @@ bad:
 			}
 	}
 
-	sk_OPENSSL_STRING_free(certflst);
+	sk_free(certflst);
 
 	if (outfile == NULL)
 		{
@@ -294,12 +295,19 @@ end:
  */
 static int add_certs_from_file(STACK_OF(X509) *stack, char *certfile)
 	{
+	struct stat st;
 	BIO *in=NULL;
 	int count=0;
 	int ret= -1;
 	STACK_OF(X509_INFO) *sk=NULL;
 	X509_INFO *xi;
 
+	if ((stat(certfile,&st) != 0))
+		{
+		BIO_printf(bio_err,"unable to load the file, %s\n",certfile);
+		goto end;
+		}
+
 	in=BIO_new(BIO_s_file());
 	if ((in == NULL) || (BIO_read_filename(in,certfile) <= 0))
 		{

apps/dgst.c

@@ -74,30 +74,11 @@
 #undef PROG
 #define PROG	dgst_main
 
-int do_fp(BIO *out, unsigned char *buf, BIO *bp, int sep, int binout,
-	  EVP_PKEY *key, unsigned char *sigin, int siglen,
-	  const char *sig_name, const char *md_name,
-	  const char *file,BIO *bmd);
+static HMAC_CTX hmac_ctx;
 
-static void list_md_fn(const EVP_MD *m,
-			const char *from, const char *to, void *arg)
-	{
-	const char *mname;
-	/* Skip aliases */
-	if (!m)
-		return;
-	mname = OBJ_nid2ln(EVP_MD_type(m));
-	/* Skip shortnames */
-	if (strcmp(from, mname))
-		return;
-	/* Skip clones */
-	if (EVP_MD_flags(m) & EVP_MD_FLAG_PKEY_DIGEST)
-		return;
-	if (strchr(mname, ' '))
-		mname= EVP_MD_name(m);
-	BIO_printf(arg, "-%-14s to use the %s message digest algorithm\n",
-			mname, mname);
-	}
+int do_fp(BIO *out, unsigned char *buf, BIO *bp, int sep, int binout,
+	  EVP_PKEY *key, unsigned char *sigin, int siglen, const char *title,
+	  const char *file,BIO *bmd,const char *hmac_key, int non_fips_allow);
 
 int MAIN(int, char **);
 
@@ -105,11 +86,12 @@ int MAIN(int argc, char **argv)
 	{
 	ENGINE *e = NULL;
 	unsigned char *buf=NULL;
-	int i,err=1;
+	int i,err=0;
 	const EVP_MD *md=NULL,*m;
 	BIO *in=NULL,*inp;
 	BIO *bmd=NULL;
 	BIO *out = NULL;
+	const char *name;
 #define PROG_NAME_SIZE  39
 	char pname[PROG_NAME_SIZE+1];
 	int separator=0;
@@ -126,8 +108,7 @@ int MAIN(int argc, char **argv)
 	char *engine=NULL;
 #endif
 	char *hmac_key=NULL;
-	char *mac_name=NULL;
-	STACK_OF(OPENSSL_STRING) *sigopts = NULL, *macopts = NULL;
+	int non_fips_allow = 0;
 
 	apps_startup();
 
@@ -155,8 +136,6 @@ int MAIN(int argc, char **argv)
 		if ((*argv)[0] != '-') break;
 		if (strcmp(*argv,"-c") == 0)
 			separator=1;
-		else if (strcmp(*argv,"-r") == 0)
-			separator=2;
 		else if (strcmp(*argv,"-rand") == 0)
 			{
 			if (--argc < 1) break;
@@ -206,7 +185,6 @@ int MAIN(int argc, char **argv)
 			{
 			if (--argc < 1) break;
 			engine= *(++argv);
-        		e = setup_engine(bio_err, engine, 0);
 			}
 #endif
 		else if (strcmp(*argv,"-hex") == 0)
@@ -215,36 +193,14 @@ int MAIN(int argc, char **argv)
 			out_bin = 1;
 		else if (strcmp(*argv,"-d") == 0)
 			debug=1;
+		else if (strcmp(*argv,"-non-fips-allow") == 0)
+			non_fips_allow=1;
 		else if (!strcmp(*argv,"-hmac"))
 			{
 			if (--argc < 1)
 				break;
 			hmac_key=*++argv;
 			}
-		else if (!strcmp(*argv,"-mac"))
-			{
-			if (--argc < 1)
-				break;
-			mac_name=*++argv;
-			}
-		else if (strcmp(*argv,"-sigopt") == 0)
-			{
-			if (--argc < 1)
-				break;
-			if (!sigopts)
-				sigopts = sk_OPENSSL_STRING_new_null();
-			if (!sigopts || !sk_OPENSSL_STRING_push(sigopts, *(++argv)))
-				break;
-			}
-		else if (strcmp(*argv,"-macopt") == 0)
-			{
-			if (--argc < 1)
-				break;
-			if (!macopts)
-				macopts = sk_OPENSSL_STRING_new_null();
-			if (!macopts || !sk_OPENSSL_STRING_push(macopts, *(++argv)))
-				break;
-			}
 		else if ((m=EVP_get_digestbyname(&((*argv)[1]))) != NULL)
 			md=m;
 		else
@@ -253,9 +209,12 @@ int MAIN(int argc, char **argv)
 		argv++;
 		}
 
+	if (md == NULL)
+		md=EVP_md5();
 
 	if(do_verify && !sigfile) {
 		BIO_printf(bio_err, "No signature to verify: use the -signature option\n");
+		err = 1; 
 		goto end;
 	}
 
@@ -264,7 +223,6 @@ int MAIN(int argc, char **argv)
 		BIO_printf(bio_err,"unknown option '%s'\n",*argv);
 		BIO_printf(bio_err,"options are\n");
 		BIO_printf(bio_err,"-c              to output the digest with separating colons\n");
-		BIO_printf(bio_err,"-r              to output the digest in coreutils format\n");
 		BIO_printf(bio_err,"-d              to output debug info\n");
 		BIO_printf(bio_err,"-hex            output as hex dump\n");
 		BIO_printf(bio_err,"-binary         output in binary form\n");
@@ -272,27 +230,41 @@ int MAIN(int argc, char **argv)
 		BIO_printf(bio_err,"-verify file    verify a signature using public key in file\n");
 		BIO_printf(bio_err,"-prverify file  verify a signature using private key in file\n");
 		BIO_printf(bio_err,"-keyform arg    key file format (PEM or ENGINE)\n");
-		BIO_printf(bio_err,"-out filename   output to filename rather than stdout\n");
 		BIO_printf(bio_err,"-signature file signature to verify\n");
-		BIO_printf(bio_err,"-sigopt nm:v    signature parameter\n");
-		BIO_printf(bio_err,"-hmac key       create hashed MAC with key\n");
-		BIO_printf(bio_err,"-mac algorithm  create MAC (not neccessarily HMAC)\n"); 
-		BIO_printf(bio_err,"-macopt nm:v    MAC algorithm parameters or key\n");
+		BIO_printf(bio_err,"-binary         output in binary form\n");
 #ifndef OPENSSL_NO_ENGINE
 		BIO_printf(bio_err,"-engine e       use engine e, possibly a hardware device.\n");
 #endif
 
-		EVP_MD_do_all_sorted(list_md_fn, bio_err);
+		BIO_printf(bio_err,"-%3s to use the %s message digest algorithm (default)\n",
+			LN_md5,LN_md5);
+		BIO_printf(bio_err,"-%3s to use the %s message digest algorithm\n",
+			LN_md4,LN_md4);
+		BIO_printf(bio_err,"-%3s to use the %s message digest algorithm\n",
+			LN_md2,LN_md2);
+		BIO_printf(bio_err,"-%3s to use the %s message digest algorithm\n",
+			LN_sha1,LN_sha1);
+		BIO_printf(bio_err,"-%3s to use the %s message digest algorithm\n",
+			LN_sha,LN_sha);
+		BIO_printf(bio_err,"-%3s to use the %s message digest algorithm\n",
+			LN_mdc2,LN_mdc2);
+		BIO_printf(bio_err,"-%3s to use the %s message digest algorithm\n",
+			LN_ripemd160,LN_ripemd160);
+		err=1;
 		goto end;
 		}
 
+#ifndef OPENSSL_NO_ENGINE
+	e = setup_engine(bio_err, engine, 0);
+#endif
+
 	in=BIO_new(BIO_s_file());
 	bmd=BIO_new(BIO_f_md());
 	if (debug)
 		{
 		BIO_set_callback(in,BIO_debug_callback);
 		/* needed for windows 3.1 */
-		BIO_set_callback_arg(in,(char *)bio_err);
+		BIO_set_callback_arg(in,bio_err);
 		}
 
 	if(!app_passwd(bio_err, passargin, NULL, &passin, NULL))
@@ -308,10 +280,8 @@ int MAIN(int argc, char **argv)
 		}
 
 	if(out_bin == -1) {
-		if(keyfile)
-			out_bin = 1;
-		else
-			out_bin = 0;
+		if(keyfile) out_bin = 1;
+		else out_bin = 0;
 	}
 
 	if(randfile)
@@ -337,11 +307,6 @@ int MAIN(int argc, char **argv)
 		ERR_print_errors(bio_err);
 		goto end;
 	}
-	if ((!!mac_name + !!keyfile + !!hmac_key) > 1)
-		{
-		BIO_printf(bio_err, "MAC and Signing key cannot both be specified\n");
-		goto end;
-		}
 
 	if(keyfile)
 		{
@@ -359,101 +324,6 @@ int MAIN(int argc, char **argv)
 			}
 		}
 
-	if (mac_name)
-		{
-		EVP_PKEY_CTX *mac_ctx = NULL;
-		int r = 0;
-		if (!init_gen_str(bio_err, &mac_ctx, mac_name,e, 0))
-			goto mac_end;
-		if (macopts)
-			{
-			char *macopt;
-			for (i = 0; i < sk_OPENSSL_STRING_num(macopts); i++)
-				{
-				macopt = sk_OPENSSL_STRING_value(macopts, i);
-				if (pkey_ctrl_string(mac_ctx, macopt) <= 0)
-					{
-					BIO_printf(bio_err,
-						"MAC parameter error \"%s\"\n",
-						macopt);
-					ERR_print_errors(bio_err);
-					goto mac_end;
-					}
-				}
-			}
-		if (EVP_PKEY_keygen(mac_ctx, &sigkey) <= 0)
-			{
-			BIO_puts(bio_err, "Error generating key\n");
-			ERR_print_errors(bio_err);
-			goto mac_end;
-			}
-		r = 1;
-		mac_end:
-		if (mac_ctx)
-			EVP_PKEY_CTX_free(mac_ctx);
-		if (r == 0)
-			goto end;
-		}
-
-	if (hmac_key)
-		{
-		sigkey = EVP_PKEY_new_mac_key(EVP_PKEY_HMAC, e,
-					(unsigned char *)hmac_key, -1);
-		if (!sigkey)
-			goto end;
-		}
-
-	if (sigkey)
-		{
-		EVP_MD_CTX *mctx = NULL;
-		EVP_PKEY_CTX *pctx = NULL;
-		int r;
-		if (!BIO_get_md_ctx(bmd, &mctx))
-			{
-			BIO_printf(bio_err, "Error getting context\n");
-			ERR_print_errors(bio_err);
-			goto end;
-			}
-		if (do_verify)
-			r = EVP_DigestVerifyInit(mctx, &pctx, md, e, sigkey);
-		else
-			r = EVP_DigestSignInit(mctx, &pctx, md, e, sigkey);
-		if (!r)
-			{
-			BIO_printf(bio_err, "Error setting context\n");
-			ERR_print_errors(bio_err);
-			goto end;
-			}
-		if (sigopts)
-			{
-			char *sigopt;
-			for (i = 0; i < sk_OPENSSL_STRING_num(sigopts); i++)
-				{
-				sigopt = sk_OPENSSL_STRING_value(sigopts, i);
-				if (pkey_ctrl_string(pctx, sigopt) <= 0)
-					{
-					BIO_printf(bio_err,
-						"parameter error \"%s\"\n",
-						sigopt);
-					ERR_print_errors(bio_err);
-					goto end;
-					}
-				}
-			}
-		}
-	/* we use md as a filter, reading from 'in' */
-	else
-		{
-		if (md == NULL)
-			md = EVP_md5(); 
-		if (!BIO_set_md(bmd,md))
-			{
-			BIO_printf(bio_err, "Error setting digest %s\n", pname);
-			ERR_print_errors(bio_err);
-			goto end;
-			}
-		}
-
 	if(sigfile && sigkey) {
 		BIO *sigbio;
 		sigbio = BIO_new_file(sigfile, "rb");
@@ -474,51 +344,60 @@ int MAIN(int argc, char **argv)
 			goto end;
 		}
 	}
-	inp=BIO_push(bmd,in);
 
-	if (md == NULL)
+	if (non_fips_allow)
 		{
-		EVP_MD_CTX *tctx;
-		BIO_get_md_ctx(bmd, &tctx);
-		md = EVP_MD_CTX_md(tctx);
+		EVP_MD_CTX *md_ctx;
+		BIO_get_md_ctx(bmd,&md_ctx);
+		EVP_MD_CTX_set_flags(md_ctx, EVP_MD_CTX_FLAG_NON_FIPS_ALLOW);
 		}
 
+	/* we use md as a filter, reading from 'in' */
+	if (!BIO_set_md(bmd,md))
+		{
+		BIO_printf(bio_err, "Error setting digest %s\n",
+							EVP_MD_name(md));
+		ERR_print_errors(bio_err);
+		goto end;
+		}
+		
+	inp=BIO_push(bmd,in);
+
 	if (argc == 0)
 		{
 		BIO_set_fp(in,stdin,BIO_NOCLOSE);
 		err=do_fp(out, buf,inp,separator, out_bin, sigkey, sigbuf,
-			  siglen,NULL,NULL,"stdin",bmd);
+			  siglen,"","(stdin)",bmd,hmac_key, non_fips_allow);
 		}
 	else
 		{
-		const char *md_name = NULL, *sig_name = NULL;
-		if(!out_bin)
-			{
-			if (sigkey)
-				{
-				const EVP_PKEY_ASN1_METHOD *ameth;
-				ameth = EVP_PKEY_get0_asn1(sigkey);
-				if (ameth)
-					EVP_PKEY_asn1_get0_info(NULL, NULL,
-						NULL, NULL, &sig_name, ameth);
-				}
-			md_name = EVP_MD_name(md);
-			}
-		err = 0;
+		name=OBJ_nid2sn(md->type);
 		for (i=0; i<argc; i++)
 			{
+			char *tmp,*tofree=NULL;
 			int r;
+
 			if (BIO_read_filename(in,argv[i]) <= 0)
 				{
 				perror(argv[i]);
 				err++;
 				continue;
 				}
+			if(!out_bin)
+				{
+				size_t len = strlen(name)+strlen(argv[i])+(hmac_key ? 5 : 0)+5;
+				tmp=tofree=OPENSSL_malloc(len);
+				BIO_snprintf(tmp,len,"%s%s(%s)= ",
+							 hmac_key ? "HMAC-" : "",name,argv[i]);
+				}
 			else
+				tmp="";
 			r=do_fp(out,buf,inp,separator,out_bin,sigkey,sigbuf,
-				siglen,sig_name,md_name, argv[i],bmd);
+				siglen,tmp,argv[i],bmd,hmac_key,non_fips_allow);
 			if(r)
 			    err=r;
+			if(tofree)
+				OPENSSL_free(tofree);
 			(void)BIO_reset(bmd);
 			}
 		}
@@ -533,10 +412,6 @@ end:
 		OPENSSL_free(passin);
 	BIO_free_all(out);
 	EVP_PKEY_free(sigkey);
-	if (sigopts)
-		sk_OPENSSL_STRING_free(sigopts);
-	if (macopts)
-		sk_OPENSSL_STRING_free(macopts);
 	if(sigbuf) OPENSSL_free(sigbuf);
 	if (bmd != NULL) BIO_free(bmd);
 	apps_shutdown();
@@ -544,13 +419,26 @@ end:
 	}
 
 int do_fp(BIO *out, unsigned char *buf, BIO *bp, int sep, int binout,
-	  EVP_PKEY *key, unsigned char *sigin, int siglen,
-	  const char *sig_name, const char *md_name,
-	  const char *file,BIO *bmd)
+	  EVP_PKEY *key, unsigned char *sigin, int siglen, const char *title,
+	  const char *file,BIO *bmd,const char *hmac_key, int non_fips_allow)
 	{
-	size_t len;
+	unsigned int len;
 	int i;
+	EVP_MD_CTX *md_ctx;
 
+	if (hmac_key)
+		{
+		EVP_MD *md;
+
+		BIO_get_md(bmd,&md);
+		HMAC_CTX_init(&hmac_ctx);
+		if (non_fips_allow)
+			HMAC_CTX_set_flags(&hmac_ctx,
+					EVP_MD_CTX_FLAG_NON_FIPS_ALLOW);
+		HMAC_Init_ex(&hmac_ctx,hmac_key,strlen(hmac_key),md, NULL);
+		BIO_get_md_ctx(bmd,&md_ctx);
+		BIO_set_md_ctx(bmd,&hmac_ctx.md_ctx);
+		}
 	for (;;)
 		{
 		i=BIO_read(bp,(char *)buf,BUFSIZE);
@@ -566,7 +454,7 @@ int do_fp(BIO *out, unsigned char *buf, BIO *bp, int sep, int binout,
 		{
 		EVP_MD_CTX *ctx;
 		BIO_get_md_ctx(bp, &ctx);
-		i = EVP_DigestVerifyFinal(ctx, sigin, (unsigned int)siglen); 
+		i = EVP_VerifyFinal(ctx, sigin, (unsigned int)siglen, key); 
 		if(i > 0)
 			BIO_printf(out, "Verified OK\n");
 		else if(i == 0)
@@ -586,40 +474,26 @@ int do_fp(BIO *out, unsigned char *buf, BIO *bp, int sep, int binout,
 		{
 		EVP_MD_CTX *ctx;
 		BIO_get_md_ctx(bp, &ctx);
-		len = BUFSIZE;
-		if(!EVP_DigestSignFinal(ctx, buf, &len)) 
+		if(!EVP_SignFinal(ctx, buf, (unsigned int *)&len, key)) 
 			{
 			BIO_printf(bio_err, "Error Signing Data\n");
 			ERR_print_errors(bio_err);
 			return 1;
 			}
 		}
-	else
+	else if(hmac_key)
 		{
-		len=BIO_gets(bp,(char *)buf,BUFSIZE);
-		if ((int)len <0)
-			{
-			ERR_print_errors(bio_err);
-			return 1;
-			}
+		HMAC_Final(&hmac_ctx,buf,&len);
+		HMAC_CTX_cleanup(&hmac_ctx);
 		}
+	else
+		len=BIO_gets(bp,(char *)buf,BUFSIZE);
 
 	if(binout) BIO_write(out, buf, len);
-	else if (sep == 2)
-		{
-		for (i=0; i<(int)len; i++)
-			BIO_printf(out, "%02x",buf[i]);
-		BIO_printf(out, " *%s\n", file);
-		}
 	else 
 		{
-		if (sig_name)
-			BIO_printf(out, "%s-%s(%s)= ", sig_name, md_name, file);
-		else if (md_name)
-			BIO_printf(out, "%s(%s)= ", md_name, file);
-		else
-			BIO_printf(out, "(%s)= ", file);
-		for (i=0; i<(int)len; i++)
+		BIO_write(out,title,strlen(title));
+		for (i=0; (unsigned int)i<len; i++)
 			{
 			if (sep && (i != 0))
 				BIO_printf(out, ":");
@@ -627,6 +501,10 @@ int do_fp(BIO *out, unsigned char *buf, BIO *bp, int sep, int binout,
 			}
 		BIO_printf(out, "\n");
 		}
+	if (hmac_key)
+		{
+		BIO_set_md_ctx(bmd,md_ctx);
+		}
 	return 0;
 	}
 

apps/dh.c

@@ -57,7 +57,6 @@
  * [including the GNU Public Licence.]
  */
 
-#include <openssl/opensslconf.h>	/* for OPENSSL_NO_DH */
 #ifndef OPENSSL_NO_DH
 #include <stdio.h>
 #include <stdlib.h>
@@ -88,6 +87,9 @@ int MAIN(int, char **);
 
 int MAIN(int argc, char **argv)
 	{
+#ifndef OPENSSL_NO_ENGINE
+	ENGINE *e = NULL;
+#endif
 	DH *dh=NULL;
 	int i,badops=0,text=0;
 	BIO *in=NULL,*out=NULL;
@@ -186,7 +188,7 @@ bad:
 	ERR_load_crypto_strings();
 
 #ifndef OPENSSL_NO_ENGINE
-        setup_engine(bio_err, engine, 0);
+        e = setup_engine(bio_err, engine, 0);
 #endif
 
 	in=BIO_new(BIO_s_file());
@@ -346,10 +348,4 @@ end:
 	apps_shutdown();
 	OPENSSL_EXIT(ret);
 	}
-#else /* !OPENSSL_NO_DH */
-
-# if PEDANTIC
-static void *dummy=&dummy;
-# endif
-
 #endif

apps/dhparam.c

@@ -109,7 +109,6 @@
  *
  */
 
-#include <openssl/opensslconf.h>	/* for OPENSSL_NO_DH */
 #ifndef OPENSSL_NO_DH
 #include <stdio.h>
 #include <stdlib.h>
@@ -143,12 +142,15 @@
  * -C
  */
 
-static int MS_CALLBACK dh_cb(int p, int n, BN_GENCB *cb);
+static void MS_CALLBACK dh_cb(int p, int n, void *arg);
 
 int MAIN(int, char **);
 
 int MAIN(int argc, char **argv)
 	{
+#ifndef OPENSSL_NO_ENGINE
+	ENGINE *e = NULL;
+#endif
 	DH *dh=NULL;
 	int i,badops=0,text=0;
 #ifndef OPENSSL_NO_DSA
@@ -267,7 +269,7 @@ bad:
 	ERR_load_crypto_strings();
 
 #ifndef OPENSSL_NO_ENGINE
-        setup_engine(bio_err, engine, 0);
+        e = setup_engine(bio_err, engine, 0);
 #endif
 
 	if (g && !num)
@@ -292,8 +294,6 @@ bad:
 
 	if(num) {
 
-		BN_GENCB cb;
-		BN_GENCB_set(&cb, dh_cb, bio_err);
 		if (!app_RAND_load_file(NULL, bio_err, 1) && inrand == NULL)
 			{
 			BIO_printf(bio_err,"warning, not much extra random data, consider using the -rand option\n");
@@ -305,13 +305,12 @@ bad:
 #ifndef OPENSSL_NO_DSA
 		if (dsaparam)
 			{
-			DSA *dsa = DSA_new();
+			DSA *dsa;
 			
 			BIO_printf(bio_err,"Generating DSA parameters, %d bit long prime\n",num);
-			if(!dsa || !DSA_generate_parameters_ex(dsa, num,
-						NULL, 0, NULL, NULL, &cb))
+			dsa = DSA_generate_parameters(num, NULL, 0, NULL, NULL, dh_cb, bio_err);
+			if (dsa == NULL)
 				{
-				if(dsa) DSA_free(dsa);
 				ERR_print_errors(bio_err);
 				goto end;
 				}
@@ -327,12 +326,12 @@ bad:
 		else
 #endif
 			{
-			dh = DH_new();
 			BIO_printf(bio_err,"Generating DH parameters, %d bit long safe prime, generator %d\n",num,g);
 			BIO_printf(bio_err,"This is going to take a long time\n");
-			if(!dh || !DH_generate_parameters_ex(dh, num, g, &cb))
+			dh=DH_generate_parameters(num,g,dh_cb,bio_err);
+			
+			if (dh == NULL)
 				{
-				if(dh) DH_free(dh);
 				ERR_print_errors(bio_err);
 				goto end;
 				}
@@ -535,7 +534,7 @@ end:
 	}
 
 /* dh_cb is identical to dsa_cb in apps/dsaparam.c */
-static int MS_CALLBACK dh_cb(int p, int n, BN_GENCB *cb)
+static void MS_CALLBACK dh_cb(int p, int n, void *arg)
 	{
 	char c='*';
 
@@ -543,18 +542,11 @@ static int MS_CALLBACK dh_cb(int p, int n, BN_GENCB *cb)
 	if (p == 1) c='+';
 	if (p == 2) c='*';
 	if (p == 3) c='\n';
-	BIO_write(cb->arg,&c,1);
-	(void)BIO_flush(cb->arg);
+	BIO_write((BIO *)arg,&c,1);
+	(void)BIO_flush((BIO *)arg);
 #ifdef LINT
 	p=n;
 #endif
-	return 1;
 	}
 
-#else /* !OPENSSL_NO_DH */
-
-# if PEDANTIC
-static void *dummy=&dummy;
-# endif
-
 #endif

apps/dsa.c

@@ -56,7 +56,6 @@
  * [including the GNU Public Licence.]
  */
 
-#include <openssl/opensslconf.h>	/* for OPENSSL_NO_DSA */
 #ifndef OPENSSL_NO_DSA
 #include <stdio.h>
 #include <stdlib.h>
@@ -69,7 +68,6 @@
 #include <openssl/evp.h>
 #include <openssl/x509.h>
 #include <openssl/pem.h>
-#include <openssl/bn.h>
 
 #undef PROG
 #define PROG	dsa_main
@@ -84,10 +82,6 @@
  * -aes128	- encrypt output if PEM format
  * -aes192	- encrypt output if PEM format
  * -aes256	- encrypt output if PEM format
- * -camellia128 - encrypt output if PEM format
- * -camellia192 - encrypt output if PEM format
- * -camellia256 - encrypt output if PEM format
- * -seed        - encrypt output if PEM format
  * -text	- print a text version
  * -modulus	- print the DSA public key
  */
@@ -96,7 +90,9 @@ int MAIN(int, char **);
 
 int MAIN(int argc, char **argv)
 	{
+#ifndef OPENSSL_NO_ENGINE
 	ENGINE *e = NULL;
+#endif
 	int ret=1;
 	DSA *dsa=NULL;
 	int i,badops=0;
@@ -112,8 +108,6 @@ int MAIN(int argc, char **argv)
 	char *passin = NULL, *passout = NULL;
 	int modulus=0;
 
-	int pvk_encr = 2;
-
 	apps_startup();
 
 	if (bio_err == NULL)
@@ -173,12 +167,6 @@ int MAIN(int argc, char **argv)
 			engine= *(++argv);
 			}
 #endif
-		else if (strcmp(*argv,"-pvk-strong") == 0)
-			pvk_encr=2;
-		else if (strcmp(*argv,"-pvk-weak") == 0)
-			pvk_encr=1;
-		else if (strcmp(*argv,"-pvk-none") == 0)
-			pvk_encr=0;
 		else if (strcmp(*argv,"-noout") == 0)
 			noout=1;
 		else if (strcmp(*argv,"-text") == 0)
@@ -221,13 +209,6 @@ bad:
 #ifndef OPENSSL_NO_AES
 		BIO_printf(bio_err," -aes128, -aes192, -aes256\n");
 		BIO_printf(bio_err,"                 encrypt PEM output with cbc aes\n");
-#endif
-#ifndef OPENSSL_NO_CAMELLIA
-		BIO_printf(bio_err," -camellia128, -camellia192, -camellia256\n");
-		BIO_printf(bio_err,"                 encrypt PEM output with cbc camellia\n");
-#endif
-#ifndef OPENSSL_NO_SEED
-		BIO_printf(bio_err," -seed           encrypt PEM output with cbc seed\n");
 #endif
 		BIO_printf(bio_err," -text           print the key in text\n");
 		BIO_printf(bio_err," -noout          don't print key out\n");
@@ -266,22 +247,16 @@ bad:
 		}
 
 	BIO_printf(bio_err,"read DSA key\n");
-
+	if	(informat == FORMAT_ASN1) {
+		if(pubin) dsa=d2i_DSA_PUBKEY_bio(in,NULL);
+		else dsa=d2i_DSAPrivateKey_bio(in,NULL);
+	} else if (informat == FORMAT_PEM) {
+		if(pubin) dsa=PEM_read_bio_DSA_PUBKEY(in,NULL, NULL, NULL);
+		else dsa=PEM_read_bio_DSAPrivateKey(in,NULL,NULL,passin);
+	} else
 		{
-		EVP_PKEY	*pkey;
-
-		if (pubin)
-			pkey = load_pubkey(bio_err, infile, informat, 1,
-				passin, e, "Public Key");
-		else
-			pkey = load_key(bio_err, infile, informat, 1,
-				passin, e, "Private Key");
-
-		if (pkey)
-			{
-			dsa = EVP_PKEY_get1_DSA(pkey);
-			EVP_PKEY_free(pkey);
-			}
+		BIO_printf(bio_err,"bad input format specified for key\n");
+		goto end;
 		}
 	if (dsa == NULL)
 		{
@@ -334,24 +309,11 @@ bad:
 			i=PEM_write_bio_DSA_PUBKEY(out,dsa);
 		else i=PEM_write_bio_DSAPrivateKey(out,dsa,enc,
 							NULL,0,NULL, passout);
-#if !defined(OPENSSL_NO_RSA) && !defined(OPENSSL_NO_RC4)
-	} else if (outformat == FORMAT_MSBLOB || outformat == FORMAT_PVK) {
-		EVP_PKEY *pk;
-		pk = EVP_PKEY_new();
-		EVP_PKEY_set1_DSA(pk, dsa);
-		if (outformat == FORMAT_PVK)
-			i = i2b_PVK_bio(out, pk, pvk_encr, 0, passout);
-		else if (pubin || pubout)
-			i = i2b_PublicKey_bio(out, pk);
-		else
-			i = i2b_PrivateKey_bio(out, pk);
-		EVP_PKEY_free(pk);
-#endif
 	} else {
 		BIO_printf(bio_err,"bad output format specified for outfile\n");
 		goto end;
 		}
-	if (i <= 0)
+	if (!i)
 		{
 		BIO_printf(bio_err,"unable to write private key\n");
 		ERR_print_errors(bio_err);
@@ -367,10 +329,4 @@ end:
 	apps_shutdown();
 	OPENSSL_EXIT(ret);
 	}
-#else /* !OPENSSL_NO_DSA */
-
-# if PEDANTIC
-static void *dummy=&dummy;
-# endif
-
 #endif

apps/dsaparam.c

@@ -56,13 +56,6 @@
  * [including the GNU Public Licence.]
  */
 
-#include <openssl/opensslconf.h>	/* for OPENSSL_NO_DSA */
-/* Until the key-gen callbacks are modified to use newer prototypes, we allow
- * deprecated functions for openssl-internal code */
-#ifdef OPENSSL_NO_DEPRECATED
-#undef OPENSSL_NO_DEPRECATED
-#endif
-
 #ifndef OPENSSL_NO_DSA
 #include <assert.h>
 #include <stdio.h>
@@ -89,28 +82,17 @@
  * -C
  * -noout
  * -genkey
- *  #ifdef GENCB_TEST
- * -timebomb n  - interrupt keygen after <n> seconds
- *  #endif
  */
 
-#ifdef GENCB_TEST
-
-static int stop_keygen_flag = 0;
-
-static void timebomb_sigalarm(int foo)
-	{
-	stop_keygen_flag = 1;
-	}
-
-#endif
-
-static int MS_CALLBACK dsa_cb(int p, int n, BN_GENCB *cb);
+static void MS_CALLBACK dsa_cb(int p, int n, void *arg);
 
 int MAIN(int, char **);
 
 int MAIN(int argc, char **argv)
 	{
+#ifndef OPENSSL_NO_ENGINE
+	ENGINE *e = NULL;
+#endif
 	DSA *dsa=NULL;
 	int i,badops=0,text=0;
 	BIO *in=NULL,*out=NULL;
@@ -121,9 +103,6 @@ int MAIN(int argc, char **argv)
 #ifndef OPENSSL_NO_ENGINE
 	char *engine=NULL;
 #endif
-#ifdef GENCB_TEST
-	int timebomb=0;
-#endif
 
 	apps_startup();
 
@@ -170,13 +149,6 @@ int MAIN(int argc, char **argv)
 			if (--argc < 1) goto bad;
 			engine = *(++argv);
 			}
-#endif
-#ifdef GENCB_TEST
-		else if(strcmp(*argv, "-timebomb") == 0)
-			{
-			if (--argc < 1) goto bad;
-			timebomb = atoi(*(++argv));
-			}
 #endif
 		else if (strcmp(*argv,"-text") == 0)
 			text=1;
@@ -227,9 +199,6 @@ bad:
 		BIO_printf(bio_err," -rand         files to use for random number input\n");
 #ifndef OPENSSL_NO_ENGINE
 		BIO_printf(bio_err," -engine e     use engine e, possibly a hardware device.\n");
-#endif
-#ifdef GENCB_TEST
-		BIO_printf(bio_err," -timebomb n   interrupt keygen after <n> seconds\n");
 #endif
 		BIO_printf(bio_err," number        number of bits to use for generating private key\n");
 		goto end;
@@ -275,7 +244,7 @@ bad:
 		}
 
 #ifndef OPENSSL_NO_ENGINE
-        setup_engine(bio_err, engine, 0);
+        e = setup_engine(bio_err, engine, 0);
 #endif
 
 	if (need_rand)
@@ -288,47 +257,10 @@ bad:
 
 	if (numbits > 0)
 		{
-		BN_GENCB cb;
-		BN_GENCB_set(&cb, dsa_cb, bio_err);
 		assert(need_rand);
-		dsa = DSA_new();
-		if(!dsa)
-			{
-			BIO_printf(bio_err,"Error allocating DSA object\n");
-			goto end;
-			}
 		BIO_printf(bio_err,"Generating DSA parameters, %d bit long prime\n",num);
 	        BIO_printf(bio_err,"This could take some time\n");
-#ifdef GENCB_TEST
-		if(timebomb > 0)
-	{
-		struct sigaction act;
-		act.sa_handler = timebomb_sigalarm;
-		act.sa_flags = 0;
-		BIO_printf(bio_err,"(though I'll stop it if not done within %d secs)\n",
-				timebomb);
-		if(sigaction(SIGALRM, &act, NULL) != 0)
-			{
-			BIO_printf(bio_err,"Error, couldn't set SIGALRM handler\n");
-			goto end;
-			}
-		alarm(timebomb);
-	}
-#endif
-	        if(!DSA_generate_parameters_ex(dsa,num,NULL,0,NULL,NULL, &cb))
-			{
-#ifdef GENCB_TEST
-			if(stop_keygen_flag)
-				{
-				BIO_printf(bio_err,"DSA key generation time-stopped\n");
-				/* This is an asked-for behaviour! */
-				ret = 0;
-				goto end;
-				}
-#endif
-			BIO_printf(bio_err,"Error, DSA key generation failed\n");
-			goto end;
-			}
+	        dsa=DSA_generate_parameters(num,NULL,0,NULL,NULL, dsa_cb,bio_err);
 		}
 	else if	(informat == FORMAT_ASN1)
 		dsa=d2i_DSAparams_bio(in,NULL);
@@ -354,10 +286,12 @@ bad:
 	if (C)
 		{
 		unsigned char *data;
-		int l,len,bits_p;
+		int l,len,bits_p,bits_q,bits_g;
 
 		len=BN_num_bytes(dsa->p);
 		bits_p=BN_num_bits(dsa->p);
+		bits_q=BN_num_bits(dsa->q);
+		bits_g=BN_num_bits(dsa->g);
 		data=(unsigned char *)OPENSSL_malloc(len+20);
 		if (data == NULL)
 			{
@@ -451,7 +385,7 @@ end:
 	OPENSSL_EXIT(ret);
 	}
 
-static int MS_CALLBACK dsa_cb(int p, int n, BN_GENCB *cb)
+static void MS_CALLBACK dsa_cb(int p, int n, void *arg)
 	{
 	char c='*';
 
@@ -459,21 +393,10 @@ static int MS_CALLBACK dsa_cb(int p, int n, BN_GENCB *cb)
 	if (p == 1) c='+';
 	if (p == 2) c='*';
 	if (p == 3) c='\n';
-	BIO_write(cb->arg,&c,1);
-	(void)BIO_flush(cb->arg);
+	BIO_write(arg,&c,1);
+	(void)BIO_flush(arg);
 #ifdef LINT
 	p=n;
 #endif
-#ifdef GENCB_TEST
-	if(stop_keygen_flag)
-		return 0;
-#endif
-	return 1;
 	}
-#else /* !OPENSSL_NO_DSA */
-
-# if PEDANTIC
-static void *dummy=&dummy;
-# endif
-
 #endif

apps/ec.c

@@ -1,406 +0,0 @@
-/* apps/ec.c */
-/*
- * Written by Nils Larsch for the OpenSSL project.
- */
-/* ====================================================================
- * Copyright (c) 1998-2005 The OpenSSL Project.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer. 
- *
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- *
- * 3. All advertising materials mentioning features or use of this
- *    software must display the following acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit. (http://www.openssl.org/)"
- *
- * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
- *    endorse or promote products derived from this software without
- *    prior written permission. For written permission, please contact
- *    openssl-core@openssl.org.
- *
- * 5. Products derived from this software may not be called "OpenSSL"
- *    nor may "OpenSSL" appear in their names without prior written
- *    permission of the OpenSSL Project.
- *
- * 6. Redistributions of any form whatsoever must retain the following
- *    acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit (http://www.openssl.org/)"
- *
- * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
- * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE OpenSSL PROJECT OR
- * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
- * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
- * OF THE POSSIBILITY OF SUCH DAMAGE.
- * ====================================================================
- *
- * This product includes cryptographic software written by Eric Young
- * (eay@cryptsoft.com).  This product includes software written by Tim
- * Hudson (tjh@cryptsoft.com).
- *
- */
-
-#include <openssl/opensslconf.h>
-#ifndef OPENSSL_NO_EC
-#include <stdio.h>
-#include <stdlib.h>
-#include <string.h>
-#include "apps.h"
-#include <openssl/bio.h>
-#include <openssl/err.h>
-#include <openssl/evp.h>
-#include <openssl/pem.h>
-
-#undef PROG
-#define PROG	ec_main
-
-/* -inform arg    - input format - default PEM (one of DER, NET or PEM)
- * -outform arg   - output format - default PEM
- * -in arg        - input file - default stdin
- * -out arg       - output file - default stdout
- * -des           - encrypt output if PEM format with DES in cbc mode
- * -text          - print a text version
- * -param_out     - print the elliptic curve parameters
- * -conv_form arg - specifies the point encoding form
- * -param_enc arg - specifies the parameter encoding
- */
-
-int MAIN(int, char **);
-
-int MAIN(int argc, char **argv)
-{
-	int 	ret = 1;
-	EC_KEY 	*eckey = NULL;
-	const EC_GROUP *group;
-	int 	i, badops = 0;
-	const EVP_CIPHER *enc = NULL;
-	BIO 	*in = NULL, *out = NULL;
-	int 	informat, outformat, text=0, noout=0;
-	int  	pubin = 0, pubout = 0, param_out = 0;
-	char 	*infile, *outfile, *prog, *engine;
-	char 	*passargin = NULL, *passargout = NULL;
-	char 	*passin = NULL, *passout = NULL;
-	point_conversion_form_t form = POINT_CONVERSION_UNCOMPRESSED;
-	int	new_form = 0;
-	int	asn1_flag = OPENSSL_EC_NAMED_CURVE;
-	int 	new_asn1_flag = 0;
-
-	apps_startup();
-
-	if (bio_err == NULL)
-		if ((bio_err=BIO_new(BIO_s_file())) != NULL)
-			BIO_set_fp(bio_err, stderr, BIO_NOCLOSE|BIO_FP_TEXT);
-
-	if (!load_config(bio_err, NULL))
-		goto end;
-
-	engine = NULL;
-	infile = NULL;
-	outfile = NULL;
-	informat = FORMAT_PEM;
-	outformat = FORMAT_PEM;
-
-	prog = argv[0];
-	argc--;
-	argv++;
-	while (argc >= 1)
-		{
-		if (strcmp(*argv,"-inform") == 0)
-			{
-			if (--argc < 1) goto bad;
-			informat=str2fmt(*(++argv));
-			}
-		else if (strcmp(*argv,"-outform") == 0)
-			{
-			if (--argc < 1) goto bad;
-			outformat=str2fmt(*(++argv));
-			}
-		else if (strcmp(*argv,"-in") == 0)
-			{
-			if (--argc < 1) goto bad;
-			infile= *(++argv);
-			}
-		else if (strcmp(*argv,"-out") == 0)
-			{
-			if (--argc < 1) goto bad;
-			outfile= *(++argv);
-			}
-		else if (strcmp(*argv,"-passin") == 0)
-			{
-			if (--argc < 1) goto bad;
-			passargin= *(++argv);
-			}
-		else if (strcmp(*argv,"-passout") == 0)
-			{
-			if (--argc < 1) goto bad;
-			passargout= *(++argv);
-			}
-		else if (strcmp(*argv, "-engine") == 0)
-			{
-			if (--argc < 1) goto bad;
-			engine= *(++argv);
-			}
-		else if (strcmp(*argv, "-noout") == 0)
-			noout = 1;
-		else if (strcmp(*argv, "-text") == 0)
-			text = 1;
-		else if (strcmp(*argv, "-conv_form") == 0)
-			{
-			if (--argc < 1)
-				goto bad;
-			++argv;
-			new_form = 1;
-			if (strcmp(*argv, "compressed") == 0)
-				form = POINT_CONVERSION_COMPRESSED;
-			else if (strcmp(*argv, "uncompressed") == 0)
-				form = POINT_CONVERSION_UNCOMPRESSED;
-			else if (strcmp(*argv, "hybrid") == 0)
-				form = POINT_CONVERSION_HYBRID;
-			else
-				goto bad;
-			}
-		else if (strcmp(*argv, "-param_enc") == 0)
-			{
-			if (--argc < 1)
-				goto bad;
-			++argv;
-			new_asn1_flag = 1;
-			if (strcmp(*argv, "named_curve") == 0)
-				asn1_flag = OPENSSL_EC_NAMED_CURVE;
-			else if (strcmp(*argv, "explicit") == 0)
-				asn1_flag = 0;
-			else
-				goto bad;
-			}
-		else if (strcmp(*argv, "-param_out") == 0)
-			param_out = 1;
-		else if (strcmp(*argv, "-pubin") == 0)
-			pubin=1;
-		else if (strcmp(*argv, "-pubout") == 0)
-			pubout=1;
-		else if ((enc=EVP_get_cipherbyname(&(argv[0][1]))) == NULL)
-			{
-			BIO_printf(bio_err, "unknown option %s\n", *argv);
-			badops=1;
-			break;
-			}
-		argc--;
-		argv++;
-		}
-
-	if (badops)
-		{
-bad:
-		BIO_printf(bio_err, "%s [options] <infile >outfile\n", prog);
-		BIO_printf(bio_err, "where options are\n");
-		BIO_printf(bio_err, " -inform arg     input format - "
-				"DER or PEM\n");
-		BIO_printf(bio_err, " -outform arg    output format - "
-				"DER or PEM\n");
-		BIO_printf(bio_err, " -in arg         input file\n");
-		BIO_printf(bio_err, " -passin arg     input file pass "
-				"phrase source\n");
-		BIO_printf(bio_err, " -out arg        output file\n");
-		BIO_printf(bio_err, " -passout arg    output file pass "
-				"phrase source\n");
-		BIO_printf(bio_err, " -engine e       use engine e, "
-				"possibly a hardware device.\n");
-		BIO_printf(bio_err, " -des            encrypt PEM output, "
-				"instead of 'des' every other \n"
-				"                 cipher "
-				"supported by OpenSSL can be used\n");
-		BIO_printf(bio_err, " -text           print the key\n");
-		BIO_printf(bio_err, " -noout          don't print key out\n");
-		BIO_printf(bio_err, " -param_out      print the elliptic "
-				"curve parameters\n");
-		BIO_printf(bio_err, " -conv_form arg  specifies the "
-				"point conversion form \n");
-		BIO_printf(bio_err, "                 possible values:"
-				" compressed\n");
-		BIO_printf(bio_err, "                                 "
-				" uncompressed (default)\n");
-		BIO_printf(bio_err, "                                  "
-				" hybrid\n");
-		BIO_printf(bio_err, " -param_enc arg  specifies the way"
-				" the ec parameters are encoded\n");
-		BIO_printf(bio_err, "                 in the asn1 der "
-				"encoding\n");
-		BIO_printf(bio_err, "                 possible values:"
-				" named_curve (default)\n");
-		BIO_printf(bio_err,"                                  "
-				"explicit\n");
-		goto end;
-		}
-
-	ERR_load_crypto_strings();
-
-#ifndef OPENSSL_NO_ENGINE
-        setup_engine(bio_err, engine, 0);
-#endif
-
-	if(!app_passwd(bio_err, passargin, passargout, &passin, &passout)) 
-		{
-		BIO_printf(bio_err, "Error getting passwords\n");
-		goto end;
-		}
-
-	in = BIO_new(BIO_s_file());
-	out = BIO_new(BIO_s_file());
-	if ((in == NULL) || (out == NULL))
-		{
-		ERR_print_errors(bio_err);
-		goto end;
-		}
-
-	if (infile == NULL)
-		BIO_set_fp(in, stdin, BIO_NOCLOSE);
-	else
-		{
-		if (BIO_read_filename(in, infile) <= 0)
-			{
-			perror(infile);
-			goto end;
-			}
-		}
-
-	BIO_printf(bio_err, "read EC key\n");
-	if (informat == FORMAT_ASN1) 
-		{
-		if (pubin) 
-			eckey = d2i_EC_PUBKEY_bio(in, NULL);
-		else 
-			eckey = d2i_ECPrivateKey_bio(in, NULL);
-		} 
-	else if (informat == FORMAT_PEM) 
-		{
-		if (pubin) 
-			eckey = PEM_read_bio_EC_PUBKEY(in, NULL, NULL, 
-				NULL);
-		else 
-			eckey = PEM_read_bio_ECPrivateKey(in, NULL, NULL,
-				passin);
-		} 
-	else
-		{
-		BIO_printf(bio_err, "bad input format specified for key\n");
-		goto end;
-		}
-	if (eckey == NULL)
-		{
-		BIO_printf(bio_err,"unable to load Key\n");
-		ERR_print_errors(bio_err);
-		goto end;
-		}
-
-	if (outfile == NULL)
-		{
-		BIO_set_fp(out, stdout, BIO_NOCLOSE);
-#ifdef OPENSSL_SYS_VMS
-			{
-			BIO *tmpbio = BIO_new(BIO_f_linebuffer());
-			out = BIO_push(tmpbio, out);
-			}
-#endif
-		}
-	else
-		{
-		if (BIO_write_filename(out, outfile) <= 0)
-			{
-			perror(outfile);
-			goto end;
-			}
-		}
-
-	group = EC_KEY_get0_group(eckey);
-
-	if (new_form)
-		EC_KEY_set_conv_form(eckey, form);
-
-	if (new_asn1_flag)
-		EC_KEY_set_asn1_flag(eckey, asn1_flag);
-
-	if (text) 
-		if (!EC_KEY_print(out, eckey, 0))
-			{
-			perror(outfile);
-			ERR_print_errors(bio_err);
-			goto end;
-			}
-
-	if (noout) 
-		{
-		ret = 0;
-		goto end;
-		}
-
-	BIO_printf(bio_err, "writing EC key\n");
-	if (outformat == FORMAT_ASN1) 
-		{
-		if (param_out)
-			i = i2d_ECPKParameters_bio(out, group);
-		else if (pubin || pubout) 
-			i = i2d_EC_PUBKEY_bio(out, eckey);
-		else 
-			i = i2d_ECPrivateKey_bio(out, eckey);
-		} 
-	else if (outformat == FORMAT_PEM) 
-		{
-		if (param_out)
-			i = PEM_write_bio_ECPKParameters(out, group);
-		else if (pubin || pubout)
-			i = PEM_write_bio_EC_PUBKEY(out, eckey);
-		else 
-			i = PEM_write_bio_ECPrivateKey(out, eckey, enc,
-						NULL, 0, NULL, passout);
-		} 
-	else 
-		{
-		BIO_printf(bio_err, "bad output format specified for "
-			"outfile\n");
-		goto end;
-		}
-
-	if (!i)
-		{
-		BIO_printf(bio_err, "unable to write private key\n");
-		ERR_print_errors(bio_err);
-		}
-	else
-		ret=0;
-end:
-	if (in)
-		BIO_free(in);
-	if (out)
-		BIO_free_all(out);
-	if (eckey)
-		EC_KEY_free(eckey);
-	if (passin)
-		OPENSSL_free(passin);
-	if (passout)
-		OPENSSL_free(passout);
-	apps_shutdown();
-	OPENSSL_EXIT(ret);
-}
-#else /* !OPENSSL_NO_EC */
-
-# if PEDANTIC
-static void *dummy=&dummy;
-# endif
-
-#endif

apps/ecparam.c

@@ -1,731 +0,0 @@
-/* apps/ecparam.c */
-/*
- * Written by Nils Larsch for the OpenSSL project.
- */
-/* ====================================================================
- * Copyright (c) 1998-2005 The OpenSSL Project.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer. 
- *
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- *
- * 3. All advertising materials mentioning features or use of this
- *    software must display the following acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit. (http://www.openssl.org/)"
- *
- * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
- *    endorse or promote products derived from this software without
- *    prior written permission. For written permission, please contact
- *    openssl-core@openssl.org.
- *
- * 5. Products derived from this software may not be called "OpenSSL"
- *    nor may "OpenSSL" appear in their names without prior written
- *    permission of the OpenSSL Project.
- *
- * 6. Redistributions of any form whatsoever must retain the following
- *    acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit (http://www.openssl.org/)"
- *
- * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
- * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE OpenSSL PROJECT OR
- * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
- * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
- * OF THE POSSIBILITY OF SUCH DAMAGE.
- * ====================================================================
- *
- * This product includes cryptographic software written by Eric Young
- * (eay@cryptsoft.com).  This product includes software written by Tim
- * Hudson (tjh@cryptsoft.com).
- *
- */
-/* ====================================================================
- * Copyright 2002 Sun Microsystems, Inc. ALL RIGHTS RESERVED.
- *
- * Portions of the attached software ("Contribution") are developed by 
- * SUN MICROSYSTEMS, INC., and are contributed to the OpenSSL project.
- *
- * The Contribution is licensed pursuant to the OpenSSL open source
- * license provided above.
- *
- * The elliptic curve binary polynomial software is originally written by 
- * Sheueling Chang Shantz and Douglas Stebila of Sun Microsystems Laboratories.
- *
- */
-
-#include <openssl/opensslconf.h>
-#ifndef OPENSSL_NO_EC
-#include <assert.h>
-#include <stdio.h>
-#include <stdlib.h>
-#include <time.h>
-#include <string.h>
-#include "apps.h"
-#include <openssl/bio.h>
-#include <openssl/err.h>
-#include <openssl/bn.h>
-#include <openssl/ec.h>
-#include <openssl/x509.h>
-#include <openssl/pem.h>
-
-#undef PROG
-#define PROG	ecparam_main
-
-/* -inform arg      - input format - default PEM (DER or PEM)
- * -outform arg     - output format - default PEM
- * -in  arg         - input file  - default stdin
- * -out arg         - output file - default stdout
- * -noout           - do not print the ec parameter
- * -text            - print the ec parameters in text form
- * -check           - validate the ec parameters
- * -C               - print a 'C' function creating the parameters
- * -name arg        - use the ec parameters with 'short name' name
- * -list_curves     - prints a list of all currently available curve 'short names'
- * -conv_form arg   - specifies the point conversion form 
- *                  - possible values: compressed
- *                                     uncompressed (default)
- *                                     hybrid
- * -param_enc arg   - specifies the way the ec parameters are encoded
- *                    in the asn1 der encoding
- *                    possible values: named_curve (default)
- *                                     explicit
- * -no_seed         - if 'explicit' parameters are choosen do not use the seed
- * -genkey          - generate ec key
- * -rand file       - files to use for random number input
- * -engine e        - use engine e, possibly a hardware device
- */
-
-
-static int ecparam_print_var(BIO *,BIGNUM *,const char *,int,unsigned char *);
-
-int MAIN(int, char **);
-
-int MAIN(int argc, char **argv)
-	{
-	EC_GROUP *group = NULL;
-	point_conversion_form_t form = POINT_CONVERSION_UNCOMPRESSED; 
-	int 	new_form = 0;
-	int 	asn1_flag = OPENSSL_EC_NAMED_CURVE;
-	int 	new_asn1_flag = 0;
-	char 	*curve_name = NULL, *inrand = NULL;
-	int	list_curves = 0, no_seed = 0, check = 0,
-		badops = 0, text = 0, i, need_rand = 0, genkey = 0;
-	char	*infile = NULL, *outfile = NULL, *prog;
-	BIO 	*in = NULL, *out = NULL;
-	int 	informat, outformat, noout = 0, C = 0, ret = 1;
-	char	*engine = NULL;
-
-	BIGNUM	*ec_p = NULL, *ec_a = NULL, *ec_b = NULL,
-		*ec_gen = NULL, *ec_order = NULL, *ec_cofactor = NULL;
-	unsigned char *buffer = NULL;
-
-	apps_startup();
-
-	if (bio_err == NULL)
-		if ((bio_err=BIO_new(BIO_s_file())) != NULL)
-			BIO_set_fp(bio_err,stderr,BIO_NOCLOSE|BIO_FP_TEXT);
-
-	if (!load_config(bio_err, NULL))
-		goto end;
-
-	informat=FORMAT_PEM;
-	outformat=FORMAT_PEM;
-
-	prog=argv[0];
-	argc--;
-	argv++;
-	while (argc >= 1)
-		{
-		if 	(strcmp(*argv,"-inform") == 0)
-			{
-			if (--argc < 1) goto bad;
-			informat=str2fmt(*(++argv));
-			}
-		else if (strcmp(*argv,"-outform") == 0)
-			{
-			if (--argc < 1) goto bad;
-			outformat=str2fmt(*(++argv));
-			}
-		else if (strcmp(*argv,"-in") == 0)
-			{
-			if (--argc < 1) goto bad;
-			infile= *(++argv);
-			}
-		else if (strcmp(*argv,"-out") == 0)
-			{
-			if (--argc < 1) goto bad;
-			outfile= *(++argv);
-			}
-		else if (strcmp(*argv,"-text") == 0)
-			text = 1;
-		else if (strcmp(*argv,"-C") == 0)
-			C = 1;
-		else if (strcmp(*argv,"-check") == 0)
-			check = 1;
-		else if (strcmp (*argv, "-name") == 0)
-			{
-			if (--argc < 1)
-				goto bad;
-			curve_name = *(++argv);
-			}
-		else if (strcmp(*argv, "-list_curves") == 0)
-			list_curves = 1;
-		else if (strcmp(*argv, "-conv_form") == 0)
-			{
-			if (--argc < 1)
-				goto bad;
-			++argv;
-			new_form = 1;
-			if (strcmp(*argv, "compressed") == 0)
-				form = POINT_CONVERSION_COMPRESSED;
-			else if (strcmp(*argv, "uncompressed") == 0)
-				form = POINT_CONVERSION_UNCOMPRESSED;
-			else if (strcmp(*argv, "hybrid") == 0)
-				form = POINT_CONVERSION_HYBRID;
-			else
-				goto bad;
-			}
-		else if (strcmp(*argv, "-param_enc") == 0)
-			{
-			if (--argc < 1)
-				goto bad;
-			++argv;
-			new_asn1_flag = 1;
-			if (strcmp(*argv, "named_curve") == 0)
-				asn1_flag = OPENSSL_EC_NAMED_CURVE;
-			else if (strcmp(*argv, "explicit") == 0)
-				asn1_flag = 0;
-			else
-				goto bad;
-			}
-		else if (strcmp(*argv, "-no_seed") == 0)
-			no_seed = 1;
-		else if (strcmp(*argv, "-noout") == 0)
-			noout=1;
-		else if (strcmp(*argv,"-genkey") == 0)
-			{
-			genkey=1;
-			need_rand=1;
-			}
-		else if (strcmp(*argv, "-rand") == 0)
-			{
-			if (--argc < 1) goto bad;
-			inrand= *(++argv);
-			need_rand=1;
-			}
-		else if(strcmp(*argv, "-engine") == 0)
-			{
-			if (--argc < 1) goto bad;
-			engine = *(++argv);
-			}	
-		else
-			{
-			BIO_printf(bio_err,"unknown option %s\n",*argv);
-			badops=1;
-			break;
-			}
-		argc--;
-		argv++;
-		}
-
-	if (badops)
-		{
-bad:
-		BIO_printf(bio_err, "%s [options] <infile >outfile\n",prog);
-		BIO_printf(bio_err, "where options are\n");
-		BIO_printf(bio_err, " -inform arg       input format - "
-				"default PEM (DER or PEM)\n");
-		BIO_printf(bio_err, " -outform arg      output format - "
-				"default PEM\n");
-		BIO_printf(bio_err, " -in  arg          input file  - "
-				"default stdin\n");
-		BIO_printf(bio_err, " -out arg          output file - "
-				"default stdout\n");
-		BIO_printf(bio_err, " -noout            do not print the "
-				"ec parameter\n");
-		BIO_printf(bio_err, " -text             print the ec "
-				"parameters in text form\n");
-		BIO_printf(bio_err, " -check            validate the ec "
-				"parameters\n");
-		BIO_printf(bio_err, " -C                print a 'C' "
-				"function creating the parameters\n");
-		BIO_printf(bio_err, " -name arg         use the "
-				"ec parameters with 'short name' name\n");
-		BIO_printf(bio_err, " -list_curves      prints a list of "
-				"all currently available curve 'short names'\n");
-		BIO_printf(bio_err, " -conv_form arg    specifies the "
-				"point conversion form \n");
-		BIO_printf(bio_err, "                   possible values:"
-				" compressed\n");
-		BIO_printf(bio_err, "                                   "
-				" uncompressed (default)\n");
-		BIO_printf(bio_err, "                                   "
-				" hybrid\n");
-		BIO_printf(bio_err, " -param_enc arg    specifies the way"
-				" the ec parameters are encoded\n");
-		BIO_printf(bio_err, "                   in the asn1 der "
-				"encoding\n");
-		BIO_printf(bio_err, "                   possible values:"
-				" named_curve (default)\n");
-		BIO_printf(bio_err, "                                   "
-				" explicit\n");
-		BIO_printf(bio_err, " -no_seed          if 'explicit'"
-				" parameters are choosen do not"
-				" use the seed\n");
-		BIO_printf(bio_err, " -genkey           generate ec"
-				" key\n");
-		BIO_printf(bio_err, " -rand file        files to use for"
-				" random number input\n");
-		BIO_printf(bio_err, " -engine e         use engine e, "
-				"possibly a hardware device\n");
-		goto end;
-		}
-
-	ERR_load_crypto_strings();
-
-	in=BIO_new(BIO_s_file());
-	out=BIO_new(BIO_s_file());
-	if ((in == NULL) || (out == NULL))
-		{
-		ERR_print_errors(bio_err);
-		goto end;
-		}
-
-	if (infile == NULL)
-		BIO_set_fp(in,stdin,BIO_NOCLOSE);
-	else
-		{
-		if (BIO_read_filename(in,infile) <= 0)
-			{
-			perror(infile);
-			goto end;
-			}
-		}
-	if (outfile == NULL)
-		{
-		BIO_set_fp(out,stdout,BIO_NOCLOSE);
-#ifdef OPENSSL_SYS_VMS
-		{
-		BIO *tmpbio = BIO_new(BIO_f_linebuffer());
-		out = BIO_push(tmpbio, out);
-		}
-#endif
-		}
-	else
-		{
-		if (BIO_write_filename(out,outfile) <= 0)
-			{
-			perror(outfile);
-			goto end;
-			}
-		}
-
-#ifndef OPENSSL_NO_ENGINE
-	setup_engine(bio_err, engine, 0);
-#endif
-
-	if (list_curves)
-		{
-		EC_builtin_curve *curves = NULL;
-		size_t crv_len = 0;
-		size_t n = 0;
-
-		crv_len = EC_get_builtin_curves(NULL, 0);
-
-		curves = OPENSSL_malloc((int)(sizeof(EC_builtin_curve) * crv_len));
-
-		if (curves == NULL)
-			goto end;
-
-		if (!EC_get_builtin_curves(curves, crv_len))
-			{
-			OPENSSL_free(curves);
-			goto end;
-			}
-
-		
-		for (n = 0; n < crv_len; n++)
-			{
-			const char *comment;
-			const char *sname;
-			comment = curves[n].comment;
-			sname   = OBJ_nid2sn(curves[n].nid);
-			if (comment == NULL)
-				comment = "CURVE DESCRIPTION NOT AVAILABLE";
-			if (sname == NULL)
-				sname = "";
-
-			BIO_printf(out, "  %-10s: ", sname);
-			BIO_printf(out, "%s\n", comment);
-			} 
-
-		OPENSSL_free(curves);
-		ret = 0;
-		goto end;
-		}
-
-	if (curve_name != NULL)
-		{
-		int nid;
-
-		/* workaround for the SECG curve names secp192r1
-		 * and secp256r1 (which are the same as the curves
-		 * prime192v1 and prime256v1 defined in X9.62)
-		 */
-		if (!strcmp(curve_name, "secp192r1"))
-			{
-			BIO_printf(bio_err, "using curve name prime192v1 "
-				"instead of secp192r1\n");
-			nid = NID_X9_62_prime192v1;
-			}
-		else if (!strcmp(curve_name, "secp256r1"))
-			{
-			BIO_printf(bio_err, "using curve name prime256v1 "
-				"instead of secp256r1\n");
-			nid = NID_X9_62_prime256v1;
-			}
-		else
-			nid = OBJ_sn2nid(curve_name);
-	
-		if (nid == 0)
-			{
-			BIO_printf(bio_err, "unknown curve name (%s)\n", 
-				curve_name);
-			goto end;
-			}
-
-		group = EC_GROUP_new_by_curve_name(nid);
-		if (group == NULL)
-			{
-			BIO_printf(bio_err, "unable to create curve (%s)\n", 
-				curve_name);
-			goto end;
-			}
-		EC_GROUP_set_asn1_flag(group, asn1_flag);
-		EC_GROUP_set_point_conversion_form(group, form);
-		}
-	else if (informat == FORMAT_ASN1)
-		{
-		group = d2i_ECPKParameters_bio(in, NULL);
-		}
-	else if (informat == FORMAT_PEM)
-		{
-		group = PEM_read_bio_ECPKParameters(in,NULL,NULL,NULL);
-		}
-	else
-		{
-		BIO_printf(bio_err, "bad input format specified\n");
-		goto end;
-		}
-
-	if (group == NULL)
-		{
-		BIO_printf(bio_err, 
-			"unable to load elliptic curve parameters\n");
-		ERR_print_errors(bio_err);
-		goto end;
-		}
-
-	if (new_form)
-		EC_GROUP_set_point_conversion_form(group, form);
-
-	if (new_asn1_flag)
-		EC_GROUP_set_asn1_flag(group, asn1_flag);
-
-	if (no_seed)
-		{
-		EC_GROUP_set_seed(group, NULL, 0);
-		}
-
-	if (text)
-		{
-		if (!ECPKParameters_print(out, group, 0))
-			goto end;
-		}
-
-	if (check)
-		{
-		if (group == NULL)
-			BIO_printf(bio_err, "no elliptic curve parameters\n");
-		BIO_printf(bio_err, "checking elliptic curve parameters: ");
-		if (!EC_GROUP_check(group, NULL))
-			{
-			BIO_printf(bio_err, "failed\n");
-			ERR_print_errors(bio_err);
-			}
-		else
-			BIO_printf(bio_err, "ok\n");
-			
-		}
-
-	if (C)
-		{
-		size_t	buf_len = 0, tmp_len = 0;
-		const EC_POINT *point;
-		int	is_prime, len = 0;
-		const EC_METHOD *meth = EC_GROUP_method_of(group);
-
-		if ((ec_p = BN_new()) == NULL || (ec_a = BN_new()) == NULL ||
-		    (ec_b = BN_new()) == NULL || (ec_gen = BN_new()) == NULL ||
-		    (ec_order = BN_new()) == NULL || 
-		    (ec_cofactor = BN_new()) == NULL )
-			{
-			perror("OPENSSL_malloc");
-			goto end;
-			}
-
-		is_prime = (EC_METHOD_get_field_type(meth) == 
-			NID_X9_62_prime_field);
-
-		if (is_prime)
-			{
-			if (!EC_GROUP_get_curve_GFp(group, ec_p, ec_a,
-				ec_b, NULL))
-				goto end;
-			}
-		else
-			{
-			/* TODO */
-			goto end;
-			}
-
-		if ((point = EC_GROUP_get0_generator(group)) == NULL)
-			goto end;
-		if (!EC_POINT_point2bn(group, point, 
-			EC_GROUP_get_point_conversion_form(group), ec_gen, 
-			NULL))
-			goto end;
-		if (!EC_GROUP_get_order(group, ec_order, NULL))
-			goto end;
-		if (!EC_GROUP_get_cofactor(group, ec_cofactor, NULL))
-			goto end;
-
-		if (!ec_p || !ec_a || !ec_b || !ec_gen || 
-			!ec_order || !ec_cofactor)
-			goto end;
-
-		len = BN_num_bits(ec_order);
-
-		if ((tmp_len = (size_t)BN_num_bytes(ec_p)) > buf_len)
-			buf_len = tmp_len;
-		if ((tmp_len = (size_t)BN_num_bytes(ec_a)) > buf_len)
-			buf_len = tmp_len;
-		if ((tmp_len = (size_t)BN_num_bytes(ec_b)) > buf_len)
-			buf_len = tmp_len;
-		if ((tmp_len = (size_t)BN_num_bytes(ec_gen)) > buf_len)
-			buf_len = tmp_len;
-		if ((tmp_len = (size_t)BN_num_bytes(ec_order)) > buf_len)
-			buf_len = tmp_len;
-		if ((tmp_len = (size_t)BN_num_bytes(ec_cofactor)) > buf_len)
-			buf_len = tmp_len;
-
-		buffer = (unsigned char *)OPENSSL_malloc(buf_len);
-
-		if (buffer == NULL)
-			{
-			perror("OPENSSL_malloc");
-			goto end;
-			}
-
-		ecparam_print_var(out, ec_p, "ec_p", len, buffer);
-		ecparam_print_var(out, ec_a, "ec_a", len, buffer);
-		ecparam_print_var(out, ec_b, "ec_b", len, buffer);
-		ecparam_print_var(out, ec_gen, "ec_gen", len, buffer);
-		ecparam_print_var(out, ec_order, "ec_order", len, buffer);
-		ecparam_print_var(out, ec_cofactor, "ec_cofactor", len, 
-			buffer);
-
-		BIO_printf(out, "\n\n");
-
-		BIO_printf(out, "EC_GROUP *get_ec_group_%d(void)\n\t{\n", len);
-		BIO_printf(out, "\tint ok=0;\n");
-		BIO_printf(out, "\tEC_GROUP *group = NULL;\n");
-		BIO_printf(out, "\tEC_POINT *point = NULL;\n");
-		BIO_printf(out, "\tBIGNUM   *tmp_1 = NULL, *tmp_2 = NULL, "
-				"*tmp_3 = NULL;\n\n");
-		BIO_printf(out, "\tif ((tmp_1 = BN_bin2bn(ec_p_%d, "
-				"sizeof(ec_p_%d), NULL)) == NULL)\n\t\t"
-				"goto err;\n", len, len);
-		BIO_printf(out, "\tif ((tmp_2 = BN_bin2bn(ec_a_%d, "
-				"sizeof(ec_a_%d), NULL)) == NULL)\n\t\t"
-				"goto err;\n", len, len);
-		BIO_printf(out, "\tif ((tmp_3 = BN_bin2bn(ec_b_%d, "
-				"sizeof(ec_b_%d), NULL)) == NULL)\n\t\t"
-				"goto err;\n", len, len);
-		if (is_prime)
-			{
-			BIO_printf(out, "\tif ((group = EC_GROUP_new_curve_"
-				"GFp(tmp_1, tmp_2, tmp_3, NULL)) == NULL)"
-				"\n\t\tgoto err;\n\n");
-			}
-		else
-			{
-			/* TODO */
-			goto end;
-			}
-		BIO_printf(out, "\t/* build generator */\n");
-		BIO_printf(out, "\tif ((tmp_1 = BN_bin2bn(ec_gen_%d, "
-				"sizeof(ec_gen_%d), tmp_1)) == NULL)"
-				"\n\t\tgoto err;\n", len, len);
-		BIO_printf(out, "\tpoint = EC_POINT_bn2point(group, tmp_1, "
-				"NULL, NULL);\n");
-		BIO_printf(out, "\tif (point == NULL)\n\t\tgoto err;\n");
-		BIO_printf(out, "\tif ((tmp_2 = BN_bin2bn(ec_order_%d, "
-				"sizeof(ec_order_%d), tmp_2)) == NULL)"
-				"\n\t\tgoto err;\n", len, len);
-		BIO_printf(out, "\tif ((tmp_3 = BN_bin2bn(ec_cofactor_%d, "
-				"sizeof(ec_cofactor_%d), tmp_3)) == NULL)"
-				"\n\t\tgoto err;\n", len, len);
-		BIO_printf(out, "\tif (!EC_GROUP_set_generator(group, point,"
-				" tmp_2, tmp_3))\n\t\tgoto err;\n");
-		BIO_printf(out, "\n\tok=1;\n");
-		BIO_printf(out, "err:\n");
-		BIO_printf(out, "\tif (tmp_1)\n\t\tBN_free(tmp_1);\n");
-		BIO_printf(out, "\tif (tmp_2)\n\t\tBN_free(tmp_2);\n");
-		BIO_printf(out, "\tif (tmp_3)\n\t\tBN_free(tmp_3);\n");
-		BIO_printf(out, "\tif (point)\n\t\tEC_POINT_free(point);\n");
-		BIO_printf(out, "\tif (!ok)\n");
-		BIO_printf(out, "\t\t{\n");
-		BIO_printf(out, "\t\tEC_GROUP_free(group);\n");
-		BIO_printf(out, "\t\tgroup = NULL;\n");
-		BIO_printf(out, "\t\t}\n");
-		BIO_printf(out, "\treturn(group);\n\t}\n");
-	}
-
-	if (!noout)
-		{
-		if (outformat == FORMAT_ASN1)
-			i = i2d_ECPKParameters_bio(out, group);
-		else if (outformat == FORMAT_PEM)
-			i = PEM_write_bio_ECPKParameters(out, group);
-		else	
-			{
-			BIO_printf(bio_err,"bad output format specified for"
-				" outfile\n");
-			goto end;
-			}
-		if (!i)
-			{
-			BIO_printf(bio_err, "unable to write elliptic "
-				"curve parameters\n");
-			ERR_print_errors(bio_err);
-			goto end;
-			}
-		}
-	
-	if (need_rand)
-		{
-		app_RAND_load_file(NULL, bio_err, (inrand != NULL));
-		if (inrand != NULL)
-			BIO_printf(bio_err,"%ld semi-random bytes loaded\n",
-				app_RAND_load_files(inrand));
-		}
-
-	if (genkey)
-		{
-		EC_KEY *eckey = EC_KEY_new();
-
-		if (eckey == NULL)
-			goto end;
-
-		assert(need_rand);
-
-		if (EC_KEY_set_group(eckey, group) == 0)
-			goto end;
-		
-		if (!EC_KEY_generate_key(eckey))
-			{
-			EC_KEY_free(eckey);
-			goto end;
-			}
-		if (outformat == FORMAT_ASN1)
-			i = i2d_ECPrivateKey_bio(out, eckey);
-		else if (outformat == FORMAT_PEM)
-			i = PEM_write_bio_ECPrivateKey(out, eckey, NULL,
-				NULL, 0, NULL, NULL);
-		else	
-			{
-			BIO_printf(bio_err, "bad output format specified "
-				"for outfile\n");
-			EC_KEY_free(eckey);
-			goto end;
-			}
-		EC_KEY_free(eckey);
-		}
-
-	if (need_rand)
-		app_RAND_write_file(NULL, bio_err);
-
-	ret=0;
-end:
-	if (ec_p)
-		BN_free(ec_p);
-	if (ec_a)
-		BN_free(ec_a);
-	if (ec_b)
-		BN_free(ec_b);
-	if (ec_gen)
-		BN_free(ec_gen);
-	if (ec_order)
-		BN_free(ec_order);
-	if (ec_cofactor)
-		BN_free(ec_cofactor);
-	if (buffer)
-		OPENSSL_free(buffer);
-	if (in != NULL)
-		BIO_free(in);
-	if (out != NULL)
-		BIO_free_all(out);
-	if (group != NULL)
-		EC_GROUP_free(group);
-	apps_shutdown();
-	OPENSSL_EXIT(ret);
-}
-
-static int ecparam_print_var(BIO *out, BIGNUM *in, const char *var,
-	int len, unsigned char *buffer)
-	{
-	BIO_printf(out, "static unsigned char %s_%d[] = {", var, len);
-	if (BN_is_zero(in))
-		BIO_printf(out, "\n\t0x00");
-	else 
-		{
-		int i, l;
-
-		l = BN_bn2bin(in, buffer);
-		for (i=0; i<l-1; i++)
-			{
-			if ((i%12) == 0) 
-				BIO_printf(out, "\n\t");
-			BIO_printf(out, "0x%02X,", buffer[i]);
-			}
-		if ((i%12) == 0) 
-			BIO_printf(out, "\n\t");
-		BIO_printf(out, "0x%02X", buffer[i]);
-		}
-	BIO_printf(out, "\n\t};\n\n");
-	return 1;
-	}
-#else /* !OPENSSL_NO_EC */
-
-# if PEDANTIC
-static void *dummy=&dummy;
-# endif
-
-#endif

apps/enc.c

@@ -67,7 +67,6 @@
 #include <openssl/x509.h>
 #include <openssl/rand.h>
 #include <openssl/pem.h>
-#include <openssl/comp.h>
 #include <ctype.h>
 
 int set_hex(char *in,unsigned char *out,int size);
@@ -101,6 +100,9 @@ int MAIN(int, char **);
 
 int MAIN(int argc, char **argv)
 	{
+#ifndef OPENSSL_NO_ENGINE
+	ENGINE *e = NULL;
+#endif
 	static const char magic[]="Salted__";
 	char mbuf[sizeof magic-1];
 	char *strbuf=NULL;
@@ -114,10 +116,6 @@ int MAIN(int argc, char **argv)
 	char *hkey=NULL,*hiv=NULL,*hsalt = NULL;
 	char *md=NULL;
 	int enc=1,printkey=0,i,base64=0;
-#ifdef ZLIB
-	int do_zlib=0;
-	BIO *bzl = NULL;
-#endif
 	int debug=0,olb64=0,nosalt=0;
 	const EVP_CIPHER *cipher=NULL,*c;
 	EVP_CIPHER_CTX *ctx = NULL;
@@ -129,6 +127,7 @@ int MAIN(int argc, char **argv)
 	char *engine = NULL;
 #endif
 	const EVP_MD *dgst=NULL;
+	int non_fips_allow = 0;
 
 	apps_startup();
 
@@ -143,18 +142,9 @@ int MAIN(int argc, char **argv)
 	program_name(argv[0],pname,sizeof pname);
 	if (strcmp(pname,"base64") == 0)
 		base64=1;
-#ifdef ZLIB
-	if (strcmp(pname,"zlib") == 0)
-		do_zlib=1;
-#endif
 
 	cipher=EVP_get_cipherbyname(pname);
-#ifdef ZLIB
-	if (!do_zlib && !base64 && (cipher == NULL)
-				&& (strcmp(pname,"enc") != 0))
-#else
 	if (!base64 && (cipher == NULL) && (strcmp(pname,"enc") != 0))
-#endif
 		{
 		BIO_printf(bio_err,"%s is an unknown cipher\n",pname);
 		goto bad;
@@ -210,10 +200,6 @@ int MAIN(int argc, char **argv)
 			base64=1;
 		else if	(strcmp(*argv,"-base64") == 0)
 			base64=1;
-#ifdef ZLIB
-		else if	(strcmp(*argv,"-z") == 0)
-			do_zlib=1;
-#endif
 		else if (strcmp(*argv,"-bufsize") == 0)
 			{
 			if (--argc < 1) goto bad;
@@ -240,12 +226,7 @@ int MAIN(int argc, char **argv)
 				goto bad;
 				}
 			buf[0]='\0';
-			if (!fgets(buf,sizeof buf,infile))
-				{
-				BIO_printf(bio_err,"unable to read key from '%s'\n",
-					file);
-				goto bad;
-				}
+			fgets(buf,sizeof buf,infile);
 			fclose(infile);
 			i=strlen(buf);
 			if ((i > 0) &&
@@ -281,6 +262,8 @@ int MAIN(int argc, char **argv)
 			if (--argc < 1) goto bad;
 			md= *(++argv);
 			}
+		else if (strcmp(*argv,"-non-fips-allow") == 0)
+			non_fips_allow = 1;
 		else if	((argv[0][0] == '-') &&
 			((c=EVP_get_cipherbyname(&(argv[0][1]))) != NULL))
 			{
@@ -303,11 +286,9 @@ bad:
 			BIO_printf(bio_err,"%-14s passphrase is the first line of the file argument\n","-kfile");
 			BIO_printf(bio_err,"%-14s the next argument is the md to use to create a key\n","-md");
 			BIO_printf(bio_err,"%-14s   from a passphrase.  One of md2, md5, sha or sha1\n","");
-			BIO_printf(bio_err,"%-14s salt in hex is the next argument\n","-S");
 			BIO_printf(bio_err,"%-14s key/iv in hex is the next argument\n","-K/-iv");
 			BIO_printf(bio_err,"%-14s print the iv/key (then exit if -P)\n","-[pP]");
 			BIO_printf(bio_err,"%-14s buffer size\n","-bufsize <n>");
-			BIO_printf(bio_err,"%-14s disable standard block padding\n","-nopad");
 #ifndef OPENSSL_NO_ENGINE
 			BIO_printf(bio_err,"%-14s use engine e, possibly a hardware device.\n","-engine e");
 #endif
@@ -325,7 +306,7 @@ bad:
 		}
 
 #ifndef OPENSSL_NO_ENGINE
-        setup_engine(bio_err, engine, 0);
+        e = setup_engine(bio_err, engine, 0);
 #endif
 
 	if (md && (dgst=EVP_get_digestbyname(md)) == NULL)
@@ -336,7 +317,10 @@ bad:
 
 	if (dgst == NULL)
 		{
-		dgst = EVP_md5();
+		if (in_FIPS_mode)
+			dgst = EVP_sha1();
+		else
+			dgst = EVP_md5();
 		}
 
 	if (bufsize != NULL)
@@ -387,8 +371,8 @@ bad:
 		{
 		BIO_set_callback(in,BIO_debug_callback);
 		BIO_set_callback(out,BIO_debug_callback);
-		BIO_set_callback_arg(in,(char *)bio_err);
-		BIO_set_callback_arg(out,(char *)bio_err);
+		BIO_set_callback_arg(in,bio_err);
+		BIO_set_callback_arg(out,bio_err);
 		}
 
 	if (inf == NULL)
@@ -468,19 +452,6 @@ bad:
 	rbio=in;
 	wbio=out;
 
-#ifdef ZLIB
-
-	if (do_zlib)
-		{
-		if ((bzl=BIO_new(BIO_f_zlib())) == NULL)
-			goto end;
-		if (enc)
-			wbio=BIO_push(bzl,wbio);
-		else
-			rbio=BIO_push(bzl,rbio);
-		}
-#endif
-
 	if (base64)
 		{
 		if ((b64=BIO_new(BIO_f_base64())) == NULL)
@@ -488,7 +459,7 @@ bad:
 		if (debug)
 			{
 			BIO_set_callback(b64,BIO_debug_callback);
-			BIO_set_callback_arg(b64,(char *)bio_err);
+			BIO_set_callback_arg(b64,bio_err);
 			}
 		if (olb64)
 			BIO_set_flags(b64,BIO_FLAGS_BASE64_NO_NL);
@@ -562,8 +533,7 @@ bad:
 			BIO_printf(bio_err,"invalid hex iv value\n");
 			goto end;
 			}
-		if ((hiv == NULL) && (str == NULL)
-		    && EVP_CIPHER_iv_length(cipher) != 0)
+		if ((hiv == NULL) && (str == NULL))
 			{
 			/* No IV was explicitly set and no IV was generated
 			 * during EVP_BytesToKey. Hence the IV is undefined,
@@ -588,7 +558,19 @@ bad:
 		if (!EVP_CipherInit_ex(ctx, cipher, NULL, NULL, NULL, enc))
 			{
 			BIO_printf(bio_err, "Error setting cipher %s\n",
-				EVP_CIPHER_name(cipher));
+					EVP_CIPHER_name(cipher));
+			ERR_print_errors(bio_err);
+			goto end;
+			}
+
+		if (non_fips_allow)
+			EVP_CIPHER_CTX_set_flags(ctx,
+				EVP_CIPH_FLAG_NON_FIPS_ALLOW);
+
+		if (!EVP_CipherInit_ex(ctx, NULL, NULL, key, iv, enc))
+			{
+			BIO_printf(bio_err, "Error setting cipher %s\n",
+					EVP_CIPHER_name(cipher));
 			ERR_print_errors(bio_err);
 			goto end;
 			}
@@ -599,7 +581,7 @@ bad:
 		if (!EVP_CipherInit_ex(ctx, NULL, NULL, key, iv, enc))
 			{
 			BIO_printf(bio_err, "Error setting cipher %s\n",
-				EVP_CIPHER_name(cipher));
+					EVP_CIPHER_name(cipher));
 			ERR_print_errors(bio_err);
 			goto end;
 			}
@@ -607,7 +589,7 @@ bad:
 		if (debug)
 			{
 			BIO_set_callback(benc,BIO_debug_callback);
-			BIO_set_callback_arg(benc,(char *)bio_err);
+			BIO_set_callback_arg(benc,bio_err);
 			}
 
 		if (printkey)
@@ -615,7 +597,7 @@ bad:
 			if (!nosalt)
 				{
 				printf("salt=");
-				for (i=0; i<(int)sizeof(salt); i++)
+				for (i=0; i<sizeof salt; i++)
 					printf("%02X",salt[i]);
 				printf("\n");
 				}
@@ -675,9 +657,6 @@ end:
 	if (out != NULL) BIO_free_all(out);
 	if (benc != NULL) BIO_free(benc);
 	if (b64 != NULL) BIO_free(b64);
-#ifdef ZLIB
-	if (bzl != NULL) BIO_free(bzl);
-#endif
 	if(pass) OPENSSL_free(pass);
 	apps_shutdown();
 	OPENSSL_EXIT(ret);

apps/engine.c

@@ -56,6 +56,7 @@
  *
  */
 
+#ifndef OPENSSL_NO_ENGINE
 
 #include <stdio.h>
 #include <stdlib.h>
@@ -65,22 +66,20 @@
 #endif
 #include "apps.h"
 #include <openssl/err.h>
-#ifndef OPENSSL_NO_ENGINE
 #include <openssl/engine.h>
 #include <openssl/ssl.h>
 
 #undef PROG
 #define PROG	engine_main
 
-static const char *engine_usage[]={
+static char *engine_usage[]={
 "usage: engine opts [engine ...]\n",
 " -v[v[v[v]]] - verbose mode, for each engine, list its 'control commands'\n",
 "               -vv will additionally display each command's description\n",
 "               -vvv will also add the input flags for each command\n",
 "               -vvvv will also show internal input flags\n",
 " -c          - for each engine, also list the capabilities\n",
-" -t[t]       - for each engine, check that they are really available\n",
-"               -tt will display error trace for unavailable engines\n",
+" -t          - for each engine, check that they are really available\n",
 " -pre <cmd>  - runs command 'cmd' against the ENGINE before any attempts\n",
 "               to load it (if -t is used)\n",
 " -post <cmd> - runs command 'cmd' against the ENGINE after loading it\n",
@@ -92,7 +91,7 @@ static const char *engine_usage[]={
 NULL
 };
 
-static void identity(char *ptr)
+static void identity(void *ptr)
 	{
 	return;
 	}
@@ -148,6 +147,11 @@ static int util_flags(BIO *bio_out, unsigned int flags, const char *indent)
 
 	if(flags & ENGINE_CMD_FLAG_NUMERIC)
 		{
+		if(started)
+			{
+			BIO_printf(bio_out, "|");
+			err = 1;
+			}
 		BIO_printf(bio_out, "NUMERIC");
 		started = 1;
 		}
@@ -200,7 +204,7 @@ static int util_verbose(ENGINE *e, int verbose, BIO *bio_out, const char *indent
 	char *desc = NULL;
 	int flags;
 	int xpos = 0;
-	STACK_OF(OPENSSL_STRING) *cmds = NULL;
+	STACK *cmds = NULL;
 	if(!ENGINE_ctrl(e, ENGINE_CTRL_HAS_CTRL_FUNCTION, 0, NULL, NULL) ||
 			((num = ENGINE_ctrl(e, ENGINE_CTRL_GET_FIRST_CMD_TYPE,
 					0, NULL, NULL)) <= 0))
@@ -211,7 +215,7 @@ static int util_verbose(ENGINE *e, int verbose, BIO *bio_out, const char *indent
 		return 1;
 		}
 
-	cmds = sk_OPENSSL_STRING_new_null();
+	cmds = sk_new_null();
 
 	if(!cmds)
 		goto err;
@@ -247,7 +251,7 @@ static int util_verbose(ENGINE *e, int verbose, BIO *bio_out, const char *indent
                         /* Now decide on the output */
                         if(xpos == 0)
                                 /* Do an indent */
-                                xpos = BIO_puts(bio_out, indent);
+                                xpos = BIO_printf(bio_out, indent);
                         else
                                 /* Otherwise prepend a ", " */
                                 xpos += BIO_printf(bio_out, ", ");
@@ -258,7 +262,7 @@ static int util_verbose(ENGINE *e, int verbose, BIO *bio_out, const char *indent
 					(xpos + (int)strlen(name) > line_wrap))
                                         {
                                         BIO_printf(bio_out, "\n");
-                                        xpos = BIO_puts(bio_out, indent);
+                                        xpos = BIO_printf(bio_out, indent);
                                         }
                                 xpos += BIO_printf(bio_out, "%s", name);
                                 }
@@ -284,17 +288,15 @@ static int util_verbose(ENGINE *e, int verbose, BIO *bio_out, const char *indent
 		BIO_printf(bio_out, "\n");
 	ret = 1;
 err:
-	if(cmds) sk_OPENSSL_STRING_pop_free(cmds, identity);
+	if(cmds) sk_pop_free(cmds, identity);
 	if(name) OPENSSL_free(name);
 	if(desc) OPENSSL_free(desc);
 	return ret;
 	}
 
-static void util_do_cmds(ENGINE *e, STACK_OF(OPENSSL_STRING) *cmds,
-			BIO *bio_out, const char *indent)
+static void util_do_cmds(ENGINE *e, STACK *cmds, BIO *bio_out, const char *indent)
 	{
-	int loop, res, num = sk_OPENSSL_STRING_num(cmds);
-
+	int loop, res, num = sk_num(cmds);
 	if(num < 0)
 		{
 		BIO_printf(bio_out, "[Error]: internal stack error\n");
@@ -304,7 +306,7 @@ static void util_do_cmds(ENGINE *e, STACK_OF(OPENSSL_STRING) *cmds,
 		{
 		char buf[256];
 		const char *cmd, *arg;
-		cmd = sk_OPENSSL_STRING_value(cmds, loop);
+		cmd = sk_value(cmds, loop);
 		res = 1; /* assume success */
 		/* Check if this command has no ":arg" */
 		if((arg = strstr(cmd, ":")) == NULL)
@@ -341,12 +343,12 @@ int MAIN(int, char **);
 int MAIN(int argc, char **argv)
 	{
 	int ret=1,i;
-	const char **pp;
-	int verbose=0, list_cap=0, test_avail=0, test_avail_noise = 0;
+	char **pp;
+	int verbose=0, list_cap=0, test_avail=0;
 	ENGINE *e;
-	STACK_OF(OPENSSL_STRING) *engines = sk_OPENSSL_STRING_new_null();
-	STACK_OF(OPENSSL_STRING) *pre_cmds = sk_OPENSSL_STRING_new_null();
-	STACK_OF(OPENSSL_STRING) *post_cmds = sk_OPENSSL_STRING_new_null();
+	STACK *engines = sk_new_null();
+	STACK *pre_cmds = sk_new_null();
+	STACK *post_cmds = sk_new_null();
 	int badops=1;
 	BIO *bio_out=NULL;
 	const char *indent = "     ";
@@ -380,33 +382,27 @@ int MAIN(int argc, char **argv)
 			}
 		else if (strcmp(*argv,"-c") == 0)
 			list_cap=1;
-		else if (strncmp(*argv,"-t",2) == 0)
-			{
+		else if (strcmp(*argv,"-t") == 0)
 			test_avail=1;
-			if(strspn(*argv + 1, "t") < strlen(*argv + 1))
-				goto skip_arg_loop;
-			if((test_avail_noise = strlen(*argv + 1) - 1) > 1)
-				goto skip_arg_loop;
-			}
 		else if (strcmp(*argv,"-pre") == 0)
 			{
 			argc--; argv++;
 			if (argc == 0)
 				goto skip_arg_loop;
-			sk_OPENSSL_STRING_push(pre_cmds,*argv);
+			sk_push(pre_cmds,*argv);
 			}
 		else if (strcmp(*argv,"-post") == 0)
 			{
 			argc--; argv++;
 			if (argc == 0)
 				goto skip_arg_loop;
-			sk_OPENSSL_STRING_push(post_cmds,*argv);
+			sk_push(post_cmds,*argv);
 			}
 		else if ((strncmp(*argv,"-h",2) == 0) ||
 				(strcmp(*argv,"-?") == 0))
 			goto skip_arg_loop;
 		else
-			sk_OPENSSL_STRING_push(engines,*argv);
+			sk_push(engines,*argv);
 		argc--;
 		argv++;
 		}
@@ -421,17 +417,17 @@ skip_arg_loop:
 		goto end;
 		}
 
-	if (sk_OPENSSL_STRING_num(engines) == 0)
+	if (sk_num(engines) == 0)
 		{
 		for(e = ENGINE_get_first(); e != NULL; e = ENGINE_get_next(e))
 			{
-			sk_OPENSSL_STRING_push(engines,(char *)ENGINE_get_id(e));
+			sk_push(engines,(char *)ENGINE_get_id(e));
 			}
 		}
 
-	for (i=0; i<sk_OPENSSL_STRING_num(engines); i++)
+	for (i=0; i<sk_num(engines); i++)
 		{
-		const char *id = sk_OPENSSL_STRING_value(engines,i);
+		const char *id = sk_value(engines,i);
 		if ((e = ENGINE_by_id(id)) != NULL)
 			{
 			const char *name = ENGINE_get_name(e);
@@ -451,7 +447,6 @@ skip_arg_loop:
 				const int *nids;
 				ENGINE_CIPHERS_PTR fn_c;
 				ENGINE_DIGESTS_PTR fn_d;
-				ENGINE_PKEY_METHS_PTR fn_pk;
 
 				if (ENGINE_get_RSA(e) != NULL
 					&& !append_buf(&cap_buf, "RSA",
@@ -490,15 +485,6 @@ skip_ciphers:
 						goto end;
 
 skip_digests:
-				fn_pk = ENGINE_get_pkey_meths(e);
-				if(!fn_pk) goto skip_pmeths;
-				n = fn_pk(e, NULL, &nids, 0);
-				for(k=0 ; k < n ; ++k)
-					if(!append_buf(&cap_buf,
-						       OBJ_nid2sn(nids[k]),
-						       &cap_size, 256))
-						goto end;
-skip_pmeths:
 				if (cap_buf && (*cap_buf != '\0'))
 					BIO_printf(bio_out, " [%s]\n", cap_buf);
 
@@ -516,8 +502,7 @@ skip_pmeths:
 				else
 					{
 					BIO_printf(bio_out, "[ unavailable ]\n");
-					if(test_avail_noise)
-						ERR_print_errors_fp(stdout);
+					ERR_print_errors_fp(stdout);
 					ERR_clear_error();
 					}
 				}
@@ -531,11 +516,10 @@ skip_pmeths:
 
 	ret=0;
 end:
-
 	ERR_print_errors(bio_err);
-	sk_OPENSSL_STRING_pop_free(engines, identity);
-	sk_OPENSSL_STRING_pop_free(pre_cmds, identity);
-	sk_OPENSSL_STRING_pop_free(post_cmds, identity);
+	sk_pop_free(engines, identity);
+	sk_pop_free(pre_cmds, identity);
+	sk_pop_free(post_cmds, identity);
 	if (bio_out != NULL) BIO_free_all(bio_out);
 	apps_shutdown();
 	OPENSSL_EXIT(ret);

apps/errstr.c

@@ -97,12 +97,10 @@ int MAIN(int argc, char **argv)
 			out = BIO_push(tmpbio, out);
 			}
 #endif
-			lh_ERR_STRING_DATA_node_stats_bio(
-						  ERR_get_string_table(), out);
-			lh_ERR_STRING_DATA_stats_bio(ERR_get_string_table(),
-						     out);
-			lh_ERR_STRING_DATA_node_usage_stats_bio(
-						    ERR_get_string_table(),out);
+			lh_node_stats_bio((LHASH *)ERR_get_string_table(),out);
+			lh_stats_bio((LHASH *)ERR_get_string_table(),out);
+			lh_node_usage_stats_bio((LHASH *)
+				ERR_get_string_table(),out);
 			}
 		if (out != NULL) BIO_free_all(out);
 		argc--;

apps/gendh.c

@@ -57,13 +57,6 @@
  * [including the GNU Public Licence.]
  */
 
-#include <openssl/opensslconf.h>
-/* Until the key-gen callbacks are modified to use newer prototypes, we allow
- * deprecated functions for openssl-internal code */
-#ifdef OPENSSL_NO_DEPRECATED
-#undef OPENSSL_NO_DEPRECATED
-#endif
-
 #ifndef OPENSSL_NO_DH
 #include <stdio.h>
 #include <string.h>
@@ -82,13 +75,15 @@
 #undef PROG
 #define PROG gendh_main
 
-static int MS_CALLBACK dh_cb(int p, int n, BN_GENCB *cb);
+static void MS_CALLBACK dh_cb(int p, int n, void *arg);
 
 int MAIN(int, char **);
 
 int MAIN(int argc, char **argv)
 	{
-	BN_GENCB cb;
+#ifndef OPENSSL_NO_ENGINE
+	ENGINE *e = NULL;
+#endif
 	DH *dh=NULL;
 	int ret=1,num=DEFBITS;
 	int g=2;
@@ -101,7 +96,6 @@ int MAIN(int argc, char **argv)
 
 	apps_startup();
 
-	BN_GENCB_set(&cb, dh_cb, bio_err);
 	if (bio_err == NULL)
 		if ((bio_err=BIO_new(BIO_s_file())) != NULL)
 			BIO_set_fp(bio_err,stderr,BIO_NOCLOSE|BIO_FP_TEXT);
@@ -160,7 +154,7 @@ bad:
 		}
 		
 #ifndef OPENSSL_NO_ENGINE
-        setup_engine(bio_err, engine, 0);
+        e = setup_engine(bio_err, engine, 0);
 #endif
 
 	out=BIO_new(BIO_s_file());
@@ -199,9 +193,9 @@ bad:
 
 	BIO_printf(bio_err,"Generating DH parameters, %d bit long safe prime, generator %d\n",num,g);
 	BIO_printf(bio_err,"This is going to take a long time\n");
+	dh=DH_generate_parameters(num,g,dh_cb,bio_err);
 		
-	if(((dh = DH_new()) == NULL) || !DH_generate_parameters_ex(dh, num, g, &cb))
-		goto end;
+	if (dh == NULL) goto end;
 
 	app_RAND_write_file(NULL, bio_err);
 
@@ -217,7 +211,7 @@ end:
 	OPENSSL_EXIT(ret);
 	}
 
-static int MS_CALLBACK dh_cb(int p, int n, BN_GENCB *cb)
+static void MS_CALLBACK dh_cb(int p, int n, void *arg)
 	{
 	char c='*';
 
@@ -225,17 +219,10 @@ static int MS_CALLBACK dh_cb(int p, int n, BN_GENCB *cb)
 	if (p == 1) c='+';
 	if (p == 2) c='*';
 	if (p == 3) c='\n';
-	BIO_write(cb->arg,&c,1);
-	(void)BIO_flush(cb->arg);
+	BIO_write((BIO *)arg,&c,1);
+	(void)BIO_flush((BIO *)arg);
 #ifdef LINT
 	p=n;
 #endif
-	return 1;
 	}
-#else /* !OPENSSL_NO_DH */
-
-# if PEDANTIC
-static void *dummy=&dummy;
-# endif
-
 #endif

apps/gendsa.c

@@ -56,7 +56,6 @@
  * [including the GNU Public Licence.]
  */
 
-#include <openssl/opensslconf.h>	/* for OPENSSL_NO_DSA */
 #ifndef OPENSSL_NO_DSA
 #include <stdio.h>
 #include <string.h>
@@ -78,6 +77,9 @@ int MAIN(int, char **);
 
 int MAIN(int argc, char **argv)
 	{
+#ifndef OPENSSL_NO_ENGINE
+	ENGINE *e = NULL;
+#endif
 	DSA *dsa=NULL;
 	int ret=1;
 	char *outfile=NULL;
@@ -137,10 +139,6 @@ int MAIN(int argc, char **argv)
 		else if (strcmp(*argv,"-idea") == 0)
 			enc=EVP_idea_cbc();
 #endif
-#ifndef OPENSSL_NO_SEED
-		else if (strcmp(*argv,"-seed") == 0)
-			enc=EVP_seed_cbc();
-#endif
 #ifndef OPENSSL_NO_AES
 		else if (strcmp(*argv,"-aes128") == 0)
 			enc=EVP_aes_128_cbc();
@@ -148,14 +146,6 @@ int MAIN(int argc, char **argv)
 			enc=EVP_aes_192_cbc();
 		else if (strcmp(*argv,"-aes256") == 0)
 			enc=EVP_aes_256_cbc();
-#endif
-#ifndef OPENSSL_NO_CAMELLIA
-		else if (strcmp(*argv,"-camellia128") == 0)
-			enc=EVP_camellia_128_cbc();
-		else if (strcmp(*argv,"-camellia192") == 0)
-			enc=EVP_camellia_192_cbc();
-		else if (strcmp(*argv,"-camellia256") == 0)
-			enc=EVP_camellia_256_cbc();
 #endif
 		else if (**argv != '-' && dsaparams == NULL)
 			{
@@ -179,18 +169,10 @@ bad:
 #ifndef OPENSSL_NO_IDEA
 		BIO_printf(bio_err," -idea     - encrypt the generated key with IDEA in cbc mode\n");
 #endif
-#ifndef OPENSSL_NO_SEED
-		BIO_printf(bio_err," -seed\n");
-		BIO_printf(bio_err,"                 encrypt PEM output with cbc seed\n");
-#endif
 #ifndef OPENSSL_NO_AES
 		BIO_printf(bio_err," -aes128, -aes192, -aes256\n");
 		BIO_printf(bio_err,"                 encrypt PEM output with cbc aes\n");
 #endif
-#ifndef OPENSSL_NO_CAMELLIA
-		BIO_printf(bio_err," -camellia128, -camellia192, -camellia256\n");
-		BIO_printf(bio_err,"                 encrypt PEM output with cbc camellia\n");
-#endif
 #ifndef OPENSSL_NO_ENGINE
 		BIO_printf(bio_err," -engine e - use engine e, possibly a hardware device.\n");
 #endif
@@ -203,7 +185,7 @@ bad:
 		}
 
 #ifndef OPENSSL_NO_ENGINE
-        setup_engine(bio_err, engine, 0);
+        e = setup_engine(bio_err, engine, 0);
 #endif
 
 	if(!app_passwd(bio_err, NULL, passargout, NULL, &passout)) {
@@ -276,10 +258,4 @@ end:
 	apps_shutdown();
 	OPENSSL_EXIT(ret);
 	}
-#else /* !OPENSSL_NO_DSA */
-
-# if PEDANTIC
-static void *dummy=&dummy;
-# endif
-
 #endif

apps/genpkey.c

@@ -1,440 +0,0 @@
-/* apps/genpkey.c */
-/* Written by Dr Stephen N Henson (steve@openssl.org) for the OpenSSL
- * project 2006
- */
-/* ====================================================================
- * Copyright (c) 2006 The OpenSSL Project.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer. 
- *
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- *
- * 3. All advertising materials mentioning features or use of this
- *    software must display the following acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit. (http://www.OpenSSL.org/)"
- *
- * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
- *    endorse or promote products derived from this software without
- *    prior written permission. For written permission, please contact
- *    licensing@OpenSSL.org.
- *
- * 5. Products derived from this software may not be called "OpenSSL"
- *    nor may "OpenSSL" appear in their names without prior written
- *    permission of the OpenSSL Project.
- *
- * 6. Redistributions of any form whatsoever must retain the following
- *    acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit (http://www.OpenSSL.org/)"
- *
- * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
- * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE OpenSSL PROJECT OR
- * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
- * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
- * OF THE POSSIBILITY OF SUCH DAMAGE.
- * ====================================================================
- *
- * This product includes cryptographic software written by Eric Young
- * (eay@cryptsoft.com).  This product includes software written by Tim
- * Hudson (tjh@cryptsoft.com).
- *
- */
-#include <stdio.h>
-#include <string.h>
-#include "apps.h"
-#include <openssl/pem.h>
-#include <openssl/err.h>
-#include <openssl/evp.h>
-#ifndef OPENSSL_NO_ENGINE
-#include <openssl/engine.h>
-#endif
-
-static int init_keygen_file(BIO *err, EVP_PKEY_CTX **pctx,
-				const char *file, ENGINE *e);
-static int genpkey_cb(EVP_PKEY_CTX *ctx);
-
-#define PROG genpkey_main
-
-int MAIN(int, char **);
-
-int MAIN(int argc, char **argv)
-	{
-	ENGINE *e = NULL;
-	char **args, *outfile = NULL;
-	char *passarg = NULL;
-	BIO *in = NULL, *out = NULL;
-	const EVP_CIPHER *cipher = NULL;
-	int outformat;
-	int text = 0;
-	EVP_PKEY *pkey=NULL;
-	EVP_PKEY_CTX *ctx = NULL;
-	char *pass = NULL;
-	int badarg = 0;
-	int ret = 1, rv;
-
-	int do_param = 0;
-
-	if (bio_err == NULL)
-		bio_err = BIO_new_fp (stderr, BIO_NOCLOSE);
-
-	if (!load_config(bio_err, NULL))
-		goto end;
-
-	outformat=FORMAT_PEM;
-
-	ERR_load_crypto_strings();
-	OpenSSL_add_all_algorithms();
-	args = argv + 1;
-	while (!badarg && *args && *args[0] == '-')
-		{
-		if (!strcmp(*args,"-outform"))
-			{
-			if (args[1])
-				{
-				args++;
-				outformat=str2fmt(*args);
-				}
-			else badarg = 1;
-			}
-		else if (!strcmp(*args,"-pass"))
-			{
-			if (!args[1]) goto bad;
-			passarg= *(++args);
-			}
-#ifndef OPENSSL_NO_ENGINE
-		else if (strcmp(*args,"-engine") == 0)
-			{
-			if (!args[1])
-				goto bad;
-        		e = setup_engine(bio_err, *(++args), 0);
-			}
-#endif
-		else if (!strcmp (*args, "-paramfile"))
-			{
-			if (!args[1])
-				goto bad;
-			args++;
-			if (do_param == 1)
-				goto bad;
-			if (!init_keygen_file(bio_err, &ctx, *args, e))
-				goto end;
-			}
-		else if (!strcmp (*args, "-out"))
-			{
-			if (args[1])
-				{
-				args++;
-				outfile = *args;
-				}
-			else badarg = 1;
-			}
-		else if (strcmp(*args,"-algorithm") == 0)
-			{
-			if (!args[1])
-				goto bad;
-			if (!init_gen_str(bio_err, &ctx, *(++args),e, do_param))
-				goto end;
-			}
-		else if (strcmp(*args,"-pkeyopt") == 0)
-			{
-			if (!args[1])
-				goto bad;
-			if (!ctx)
-				{
-				BIO_puts(bio_err, "No keytype specified\n");
-				goto bad;
-				}
-			else if (pkey_ctrl_string(ctx, *(++args)) <= 0)
-				{
-				BIO_puts(bio_err, "parameter setting error\n");
-				ERR_print_errors(bio_err);
-				goto end;
-				}
-			}
-		else if (strcmp(*args,"-genparam") == 0)
-			{
-			if (ctx)
-				goto bad;
-			do_param = 1;
-			}
-		else if (strcmp(*args,"-text") == 0)
-			text=1;
-		else
-			{
-			cipher = EVP_get_cipherbyname(*args + 1);
-			if (!cipher)
-				{
-				BIO_printf(bio_err, "Unknown cipher %s\n",
-								*args + 1);
-				badarg = 1;
-				}
-			if (do_param == 1)
-				badarg = 1;
-			}
-		args++;
-		}
-
-	if (!ctx)
-		badarg = 1;
-
-	if (badarg)
-		{
-		bad:
-		BIO_printf(bio_err, "Usage: genpkey [options]\n");
-		BIO_printf(bio_err, "where options may be\n");
-		BIO_printf(bio_err, "-out file          output file\n");
-		BIO_printf(bio_err, "-outform X         output format (DER or PEM)\n");
-		BIO_printf(bio_err, "-pass arg          output file pass phrase source\n");
-		BIO_printf(bio_err, "-<cipher>          use cipher <cipher> to encrypt the key\n");
-#ifndef OPENSSL_NO_ENGINE
-		BIO_printf(bio_err, "-engine e          use engine e, possibly a hardware device.\n");
-#endif
-		BIO_printf(bio_err, "-paramfile file    parameters file\n");
-		BIO_printf(bio_err, "-algorithm alg     the public key algorithm\n");
-		BIO_printf(bio_err, "-pkeyopt opt:value set the public key algorithm option <opt>\n"
-				            "                   to value <value>\n");
-		BIO_printf(bio_err, "-genparam          generate parameters, not key\n");
-		BIO_printf(bio_err, "-text              print the in text\n");
-		BIO_printf(bio_err, "NB: options order may be important!  See the manual page.\n");
-		goto end;
-		}
-
-	if (!app_passwd(bio_err, passarg, NULL, &pass, NULL))
-		{
-		BIO_puts(bio_err, "Error getting password\n");
-		goto end;
-		}
-
-	if (outfile)
-		{
-		if (!(out = BIO_new_file (outfile, "wb")))
-			{
-			BIO_printf(bio_err,
-				 "Can't open output file %s\n", outfile);
-			goto end;
-			}
-		}
-	else
-		{
-		out = BIO_new_fp (stdout, BIO_NOCLOSE);
-#ifdef OPENSSL_SYS_VMS
-			{
-			BIO *tmpbio = BIO_new(BIO_f_linebuffer());
-			out = BIO_push(tmpbio, out);
-			}
-#endif
-		}
-
-	EVP_PKEY_CTX_set_cb(ctx, genpkey_cb);
-	EVP_PKEY_CTX_set_app_data(ctx, bio_err);
-
-	if (do_param)
-		{
-		if (EVP_PKEY_paramgen(ctx, &pkey) <= 0)
-			{
-			BIO_puts(bio_err, "Error generating parameters\n");
-			ERR_print_errors(bio_err);
-			goto end;
-			}
-		}
-	else
-		{
-		if (EVP_PKEY_keygen(ctx, &pkey) <= 0)
-			{
-			BIO_puts(bio_err, "Error generating key\n");
-			ERR_print_errors(bio_err);
-			goto end;
-			}
-		}
-
-	if (do_param)
-		rv = PEM_write_bio_Parameters(out, pkey);
-	else if (outformat == FORMAT_PEM) 
-		rv = PEM_write_bio_PrivateKey(out, pkey, cipher, NULL, 0,
-								NULL, pass);
-	else if (outformat == FORMAT_ASN1)
-		rv = i2d_PrivateKey_bio(out, pkey);
-	else
-		{
-		BIO_printf(bio_err, "Bad format specified for key\n");
-		goto end;
-		}
-
-	if (rv <= 0)
-		{
-		BIO_puts(bio_err, "Error writing key\n");
-		ERR_print_errors(bio_err);
-		}
-
-	if (text)
-		{
-		if (do_param)
-			rv = EVP_PKEY_print_params(out, pkey, 0, NULL);
-		else
-			rv = EVP_PKEY_print_private(out, pkey, 0, NULL);
-
-		if (rv <= 0)
-			{
-			BIO_puts(bio_err, "Error printing key\n");
-			ERR_print_errors(bio_err);
-			}
-		}
-
-	ret = 0;
-
-	end:
-	if (pkey)
-		EVP_PKEY_free(pkey);
-	if (ctx)
-		EVP_PKEY_CTX_free(ctx);
-	if (out)
-		BIO_free_all(out);
-	BIO_free(in);
-	if (pass)
-		OPENSSL_free(pass);
-
-	return ret;
-	}
-
-static int init_keygen_file(BIO *err, EVP_PKEY_CTX **pctx,
-				const char *file, ENGINE *e)
-	{
-	BIO *pbio;
-	EVP_PKEY *pkey = NULL;
-	EVP_PKEY_CTX *ctx = NULL;
-	if (*pctx)
-		{
-		BIO_puts(err, "Parameters already set!\n");
-		return 0;
-		}
-
-	pbio = BIO_new_file(file, "r");
-	if (!pbio)
-		{
-		BIO_printf(err, "Can't open parameter file %s\n", file);
-		return 0;
-		}
-
-	pkey = PEM_read_bio_Parameters(pbio, NULL);
-	BIO_free(pbio);
-
-	if (!pkey)
-		{
-		BIO_printf(bio_err, "Error reading parameter file %s\n", file);
-		return 0;
-		}
-
-	ctx = EVP_PKEY_CTX_new(pkey, e);
-	if (!ctx)
-		goto err;
-	if (EVP_PKEY_keygen_init(ctx) <= 0)
-		goto err;
-	EVP_PKEY_free(pkey);
-	*pctx = ctx;
-	return 1;
-
-	err:
-	BIO_puts(err, "Error initializing context\n");
-	ERR_print_errors(err);
-	if (ctx)
-		EVP_PKEY_CTX_free(ctx);
-	if (pkey)
-		EVP_PKEY_free(pkey);
-	return 0;
-
-	}
-
-int init_gen_str(BIO *err, EVP_PKEY_CTX **pctx,
-			const char *algname, ENGINE *e, int do_param)
-	{
-	EVP_PKEY_CTX *ctx = NULL;
-	const EVP_PKEY_ASN1_METHOD *ameth;
-	ENGINE *tmpeng = NULL;
-	int pkey_id;
-
-	if (*pctx)
-		{
-		BIO_puts(err, "Algorithm already set!\n");
-		return 0;
-		}
-
-	ameth = EVP_PKEY_asn1_find_str(&tmpeng, algname, -1);
-
-#ifndef OPENSSL_NO_ENGINE
-	if (!ameth && e)
-		ameth = ENGINE_get_pkey_asn1_meth_str(e, algname, -1);
-#endif
-
-	if (!ameth)
-		{
-		BIO_printf(bio_err, "Algorithm %s not found\n", algname);
-		return 0;
-		}
-
-	ERR_clear_error();
-
-	EVP_PKEY_asn1_get0_info(&pkey_id, NULL, NULL, NULL, NULL, ameth);
-#ifndef OPENSSL_NO_ENGINE
-	if (tmpeng)
-		ENGINE_finish(tmpeng);
-#endif
-	ctx = EVP_PKEY_CTX_new_id(pkey_id, e);
-
-	if (!ctx)
-		goto err;
-	if (do_param)
-		{
-		if (EVP_PKEY_paramgen_init(ctx) <= 0)
-			goto err;
-		}
-	else
-		{
-		if (EVP_PKEY_keygen_init(ctx) <= 0)
-			goto err;
-		}
-
-	*pctx = ctx;
-	return 1;
-
-	err:
-	BIO_printf(err, "Error initializing %s context\n", algname);
-	ERR_print_errors(err);
-	if (ctx)
-		EVP_PKEY_CTX_free(ctx);
-	return 0;
-
-	}
-
-static int genpkey_cb(EVP_PKEY_CTX *ctx)
-	{
-	char c='*';
-	BIO *b = EVP_PKEY_CTX_get_app_data(ctx);
-	int p;
-	p = EVP_PKEY_CTX_get_keygen_info(ctx, 0);
-	if (p == 0) c='.';
-	if (p == 1) c='+';
-	if (p == 2) c='*';
-	if (p == 3) c='\n';
-	BIO_write(b,&c,1);
-	(void)BIO_flush(b);
-#ifdef LINT
-	p=n;
-#endif
-	return 1;
-	}

apps/genrsa.c

@@ -56,13 +56,6 @@
  * [including the GNU Public Licence.]
  */
 
-#include <openssl/opensslconf.h>
-/* Until the key-gen callbacks are modified to use newer prototypes, we allow
- * deprecated functions for openssl-internal code */
-#ifdef OPENSSL_NO_DEPRECATED
-#undef OPENSSL_NO_DEPRECATED
-#endif
-
 #ifndef OPENSSL_NO_RSA
 #include <stdio.h>
 #include <string.h>
@@ -82,19 +75,22 @@
 #undef PROG
 #define PROG genrsa_main
 
-static int MS_CALLBACK genrsa_cb(int p, int n, BN_GENCB *cb);
+static void MS_CALLBACK genrsa_cb(int p, int n, void *arg);
 
 int MAIN(int, char **);
 
 int MAIN(int argc, char **argv)
 	{
-	BN_GENCB cb;
 #ifndef OPENSSL_NO_ENGINE
 	ENGINE *e = NULL;
 #endif
 	int ret=1;
+	RSA *rsa=NULL;
 	int i,num=DEFBITS;
 	long l;
+#ifdef OPENSSL_FIPS
+	int use_x931 = 0;
+#endif
 	const EVP_CIPHER *enc=NULL;
 	unsigned long f4=RSA_F4;
 	char *outfile=NULL;
@@ -104,13 +100,8 @@ int MAIN(int argc, char **argv)
 #endif
 	char *inrand=NULL;
 	BIO *out=NULL;
-	BIGNUM *bn = BN_new();
-	RSA *rsa = NULL;
-
-	if(!bn) goto err;
 
 	apps_startup();
-	BN_GENCB_set(&cb, genrsa_cb, bio_err);
 
 	if (bio_err == NULL)
 		if ((bio_err=BIO_new(BIO_s_file())) != NULL)
@@ -138,6 +129,10 @@ int MAIN(int argc, char **argv)
 			f4=3;
 		else if (strcmp(*argv,"-F4") == 0 || strcmp(*argv,"-f4") == 0)
 			f4=RSA_F4;
+#ifdef OPENSSL_FIPS
+		else if (strcmp(*argv,"-x931") == 0)
+			use_x931 = 1;
+#endif
 #ifndef OPENSSL_NO_ENGINE
 		else if (strcmp(*argv,"-engine") == 0)
 			{
@@ -160,10 +155,6 @@ int MAIN(int argc, char **argv)
 		else if (strcmp(*argv,"-idea") == 0)
 			enc=EVP_idea_cbc();
 #endif
-#ifndef OPENSSL_NO_SEED
-		else if (strcmp(*argv,"-seed") == 0)
-			enc=EVP_seed_cbc();
-#endif
 #ifndef OPENSSL_NO_AES
 		else if (strcmp(*argv,"-aes128") == 0)
 			enc=EVP_aes_128_cbc();
@@ -171,14 +162,6 @@ int MAIN(int argc, char **argv)
 			enc=EVP_aes_192_cbc();
 		else if (strcmp(*argv,"-aes256") == 0)
 			enc=EVP_aes_256_cbc();
-#endif
-#ifndef OPENSSL_NO_CAMELLIA
-		else if (strcmp(*argv,"-camellia128") == 0)
-			enc=EVP_camellia_128_cbc();
-		else if (strcmp(*argv,"-camellia192") == 0)
-			enc=EVP_camellia_192_cbc();
-		else if (strcmp(*argv,"-camellia256") == 0)
-			enc=EVP_camellia_256_cbc();
 #endif
 		else if (strcmp(*argv,"-passout") == 0)
 			{
@@ -199,17 +182,9 @@ bad:
 #ifndef OPENSSL_NO_IDEA
 		BIO_printf(bio_err," -idea           encrypt the generated key with IDEA in cbc mode\n");
 #endif
-#ifndef OPENSSL_NO_SEED
-		BIO_printf(bio_err," -seed\n");
-		BIO_printf(bio_err,"                 encrypt PEM output with cbc seed\n");
-#endif
 #ifndef OPENSSL_NO_AES
 		BIO_printf(bio_err," -aes128, -aes192, -aes256\n");
 		BIO_printf(bio_err,"                 encrypt PEM output with cbc aes\n");
-#endif
-#ifndef OPENSSL_NO_CAMELLIA
-		BIO_printf(bio_err," -camellia128, -camellia192, -camellia256\n");
-		BIO_printf(bio_err,"                 encrypt PEM output with cbc camellia\n");
 #endif
 		BIO_printf(bio_err," -out file       output the key to 'file\n");
 		BIO_printf(bio_err," -passout arg    output file pass phrase source\n");
@@ -265,19 +240,28 @@ bad:
 
 	BIO_printf(bio_err,"Generating RSA private key, %d bit long modulus\n",
 		num);
-#ifdef OPENSSL_NO_ENGINE
-	rsa = RSA_new();
-#else
-	rsa = RSA_new_method(e);
+#ifdef OPENSSL_FIPS
+	if (use_x931)
+		{
+		BIGNUM *pubexp;
+		pubexp = BN_new();
+		BN_set_word(pubexp, f4);
+		rsa = RSA_X931_generate_key(num, pubexp, genrsa_cb, bio_err);
+		BN_free(pubexp);
+		}
+	else
 #endif
-	if (!rsa)
-		goto err;
-
-	if(!BN_set_word(bn, f4) || !RSA_generate_key_ex(rsa, num, bn, &cb))
-		goto err;
+		rsa=RSA_generate_key(num,f4,genrsa_cb,bio_err);
 		
 	app_RAND_write_file(NULL, bio_err);
 
+	if (rsa == NULL)
+		{
+		BIO_printf(bio_err, "Key Generation error\n");
+
+		goto err;
+		}
+	
 	/* We need to do the following for when the base number size is <
 	 * long, esp windows 3.1 :-(. */
 	l=0L;
@@ -301,9 +285,8 @@ bad:
 
 	ret=0;
 err:
-	if (bn) BN_free(bn);
-	if (rsa) RSA_free(rsa);
-	if (out) BIO_free_all(out);
+	if (rsa != NULL) RSA_free(rsa);
+	if (out != NULL) BIO_free_all(out);
 	if(passout) OPENSSL_free(passout);
 	if (ret != 0)
 		ERR_print_errors(bio_err);
@@ -311,7 +294,7 @@ err:
 	OPENSSL_EXIT(ret);
 	}
 
-static int MS_CALLBACK genrsa_cb(int p, int n, BN_GENCB *cb)
+static void MS_CALLBACK genrsa_cb(int p, int n, void *arg)
 	{
 	char c='*';
 
@@ -319,12 +302,11 @@ static int MS_CALLBACK genrsa_cb(int p, int n, BN_GENCB *cb)
 	if (p == 1) c='+';
 	if (p == 2) c='*';
 	if (p == 3) c='\n';
-	BIO_write(cb->arg,&c,1);
-	(void)BIO_flush(cb->arg);
+	BIO_write((BIO *)arg,&c,1);
+	(void)BIO_flush((BIO *)arg);
 #ifdef LINT
 	p=n;
 #endif
-	return 1;
 	}
 #else /* !OPENSSL_NO_RSA */
 

apps/install.com

@@ -5,23 +5,13 @@ $! Time of creation: 22-MAY-1998 10:13
 $!
 $! P1	root of the directory tree
 $!
-$
 $	IF P1 .EQS. ""
 $	THEN
 $	    WRITE SYS$OUTPUT "First argument missing."
-$	    WRITE SYS$OUTPUT -
-		  "Should be the directory where you want things installed."
+$	    WRITE SYS$OUTPUT "Should be the directory where you want things installed."
 $	    EXIT
 $	ENDIF
 $
-$	IF (F$GETSYI("CPU").LT.128)
-$	THEN
-$	    ARCH := VAX
-$	ELSE
-$	    ARCH = F$EDIT( F$GETSYI( "ARCH_NAME"), "UPCASE")
-$	    IF (ARCH .EQS. "") THEN ARCH = "UNK"
-$	ENDIF
-$
 $	ROOT = F$PARSE(P1,"[]A.;0",,,"SYNTAX_ONLY,NO_CONCEAL") - "A.;0"
 $	ROOT_DEV = F$PARSE(ROOT,,,"DEVICE","SYNTAX_ONLY")
 $	ROOT_DIR = F$PARSE(ROOT,,,"DIRECTORY","SYNTAX_ONLY") -
@@ -29,16 +19,23 @@ $	ROOT_DIR = F$PARSE(ROOT,,,"DIRECTORY","SYNTAX_ONLY") -
 $	ROOT = ROOT_DEV + "[" + ROOT_DIR
 $
 $	DEFINE/NOLOG WRK_SSLROOT 'ROOT'.] /TRANS=CONC
-$	DEFINE/NOLOG WRK_SSLEXE WRK_SSLROOT:['ARCH'_EXE]
+$	DEFINE/NOLOG WRK_SSLVEXE WRK_SSLROOT:[VAX_EXE]
+$	DEFINE/NOLOG WRK_SSLAEXE WRK_SSLROOT:[ALPHA_EXE]
+$	DEFINE/NOLOG WRK_SSLLIB WRK_SSLROOT:[LIB]
 $
 $	IF F$PARSE("WRK_SSLROOT:[000000]") .EQS. "" THEN -
 	   CREATE/DIR/LOG WRK_SSLROOT:[000000]
-$	IF F$PARSE("WRK_SSLEXE:") .EQS. "" THEN -
-	   CREATE/DIR/LOG WRK_SSLEXE:
+$	IF F$PARSE("WRK_SSLVEXE:") .EQS. "" THEN -
+	   CREATE/DIR/LOG WRK_SSLVEXE:
+$	IF F$PARSE("WRK_SSLAEXE:") .EQS. "" THEN -
+	   CREATE/DIR/LOG WRK_SSLAEXE:
+$	IF F$PARSE("WRK_SSLLIB:") .EQS. "" THEN -
+	   CREATE/DIR/LOG WRK_SSLLIB:
 $
 $	EXE := openssl
 $
-$	EXE_DIR := [-.'ARCH'.EXE.APPS]
+$	VEXE_DIR := [-.VAX.EXE.APPS]
+$	AEXE_DIR := [-.AXP.EXE.APPS]
 $
 $	I = 0
 $ LOOP_EXE: 
@@ -46,18 +43,25 @@ $	E = F$EDIT(F$ELEMENT(I, ",", EXE),"TRIM")
 $	I = I + 1
 $	IF E .EQS. "," THEN GOTO LOOP_EXE_END
 $	SET NOON
-$	IF F$SEARCH(EXE_DIR+E+".EXE") .NES. ""
+$	IF F$SEARCH(VEXE_DIR+E+".EXE") .NES. ""
 $	THEN
-$	  COPY 'EXE_DIR''E'.EXE WRK_SSLEXE:'E'.EXE/log
-$	  SET FILE/PROT=W:RE WRK_SSLEXE:'E'.EXE
+$	  COPY 'VEXE_DIR''E'.EXE WRK_SSLVEXE:'E'.EXE/log
+$	  SET FILE/PROT=W:RE WRK_SSLVEXE:'E'.EXE
+$	ENDIF
+$	IF F$SEARCH(AEXE_DIR+E+".EXE") .NES. ""
+$	THEN
+$	  COPY 'AEXE_DIR''E'.EXE WRK_SSLAEXE:'E'.EXE/log
+$	  SET FILE/PROT=W:RE WRK_SSLAEXE:'E'.EXE
 $	ENDIF
 $	SET ON
 $	GOTO LOOP_EXE
 $ LOOP_EXE_END:
 $
 $	SET NOON
-$	COPY CA.COM WRK_SSLEXE:CA.COM/LOG
-$	SET FILE/PROT=W:RE WRK_SSLEXE:CA.COM
+$	COPY CA.COM WRK_SSLAEXE:CA.COM/LOG
+$	SET FILE/PROT=W:RE WRK_SSLAEXE:CA.COM
+$	COPY CA.COM WRK_SSLVEXE:CA.COM/LOG
+$	SET FILE/PROT=W:RE WRK_SSLVEXE:CA.COM
 $	COPY OPENSSL-VMS.CNF WRK_SSLROOT:[000000]OPENSSL.CNF/LOG
 $	SET FILE/PROT=W:R WRK_SSLROOT:[000000]OPENSSL.CNF
 $	SET ON

apps/makeapps.com

@@ -6,12 +6,11 @@ $!               A-Com Computing, Inc.
 $!               byer@mail.all-net.net
 $!
 $!  Changes by Richard Levitte <richard@levitte.org>
-$!             Zoltan Arpadffy <zoli@polarhome.com>   
 $!
 $!  This command files compiles and creates all the various different
 $!  "application" programs for the different types of encryption for OpenSSL.
 $!  The EXE's are placed in the directory [.xxx.EXE.APPS] where "xxx" denotes
-$!  ALPHA, IA64 or VAX, depending on your machine architecture.
+$!  either AXP or VAX depending on your machine architecture.
 $!
 $!  It was written so it would try to determine what "C" compiler to
 $!  use or you can specify which "C" compiler to use.
@@ -25,7 +24,7 @@ $!	   VAXC	 For VAX C.
 $!	   DECC	 For DEC C.
 $!	   GNUC	 For GNU C.
 $!
-$!  If you don't specify a compiler, it will try to determine which
+$!  If you don't speficy a compiler, it will try to determine which
 $!  "C" compiler to use.
 $!
 $!  P3, if defined, sets a TCP/IP library to use, through one of the following
@@ -39,13 +38,6 @@ $!  P4, if defined, sets a compiler thread NOT needed on OpenVMS 7.1 (and up)
 $!
 $!  P5, if defined, sets a choice of programs to compile.
 $!
-$!  For 64 bit architectures (Alpha and IA64), specify the pointer size as P6.
-$!  For 32 bit architectures (VAX), P6 is ignored.
-$!  Currently supported values are:
-$!
-$!	32	To ge a library compiled with /POINTER_SIZE=32
-$!	64	To ge a library compiled with /POINTER_SIZE=64
-$!
 $!
 $! Define A TCP/IP Library That We Will Need To Link To.
 $! (That Is, If We Need To Link To One.)
@@ -54,21 +46,20 @@ $ TCPIP_LIB = ""
 $!
 $! Check What Architecture We Are Using.
 $!
-$ IF (F$GETSYI("CPU").LT.128)
+$ IF (F$GETSYI("CPU").GE.128)
 $ THEN
 $!
-$!  The Architecture Is VAX.
+$!  The Architecture Is AXP.
 $!
-$   ARCH = "VAX"
+$   ARCH := AXP
 $!
 $! Else...
 $!
 $ ELSE
 $!
-$!  The Architecture Is Alpha, IA64 or whatever comes in the future.
+$!  The Architecture Is VAX.
 $!
-$   ARCH = F$EDIT( F$GETSYI( "ARCH_NAME"), "UPCASE")
-$   IF (ARCH .EQS. "") THEN ARCH = "UNK"
+$   ARCH := VAX
 $!
 $! End The Architecture Check.
 $!
@@ -77,22 +68,10 @@ $!
 $! Define what programs should be compiled
 $!
 $ PROGRAMS := OPENSSL
-$!
-$! Define The CRYPTO Library.
-$!
-$ CRYPTO_LIB := SYS$DISK:[-.'ARCH'.EXE.CRYPTO]LIBCRYPTO'LIB32'.OLB
-$!
-$! Define The SSL Library.
-$!
-$ SSL_LIB := SYS$DISK:[-.'ARCH'.EXE.SSL]LIBSSL'LIB32'.OLB
-$!
-$! Define The OBJ Directory.
-$!
-$ OBJ_DIR := SYS$DISK:[-.'ARCH'.OBJ.APPS]
-$!
-$! Define The EXE Directory.
-$!
-$ EXE_DIR := SYS$DISK:[-.'ARCH'.EXE.APPS]
+$!$ PROGRAMS := VERIFY,ASN1PARS,REQ,DGST,DH,ENC,PASSWD,GENDH,ERRSTR,CA,CRL,-
+$!	      RSA,DSA,DSAPARAM,-
+$!	      X509,GENRSA,GENDSA,S_SERVER,S_CLIENT,SPEED,-
+$!	      S_TIME,VERSION,PKCS7,CRL2P7,SESS_ID,CIPHERS,NSEQ,
 $!
 $! Check To Make Sure We Have Valid Command Line Parameters.
 $!
@@ -106,6 +85,18 @@ $! Tell The User What Kind of Machine We Run On.
 $!
 $ WRITE SYS$OUTPUT "Compiling On A ",ARCH," Machine."
 $!
+$! Define The CRYPTO Library.
+$!
+$ CRYPTO_LIB := SYS$DISK:[-.'ARCH'.EXE.CRYPTO]LIBCRYPTO.OLB
+$!
+$! Define The SSL Library.
+$!
+$ SSL_LIB := SYS$DISK:[-.'ARCH'.EXE.SSL]LIBSSL.OLB
+$!
+$! Define The OBJ Directory.
+$!
+$ OBJ_DIR := SYS$DISK:[-.'ARCH'.OBJ.APPS]
+$!
 $! Check To See If The OBJ Directory Exists.
 $!
 $ IF (F$PARSE(OBJ_DIR).EQS."")
@@ -119,6 +110,10 @@ $! End The OBJ Directory Check.
 $!
 $ ENDIF
 $!
+$! Define The EXE Directory.
+$!
+$ EXE_DIR := SYS$DISK:[-.'ARCH'.EXE.APPS]
+$!
 $! Check To See If The EXE Directory Exists.
 $!
 $ IF (F$PARSE(EXE_DIR).EQS."")
@@ -141,172 +136,157 @@ $!
 $ GOSUB CHECK_OPT_FILE
 $!
 $! Define The Application Files.
-$! NOTE: Some might think this list ugly.  However, it's made this way to
-$! reflect the E_OBJ variable in Makefile as closely as possible, thereby
-$! making it fairly easy to verify that the lists are the same.
 $!
-$ LIB_OPENSSL = "VERIFY,ASN1PARS,REQ,DGST,DH,DHPARAM,ENC,PASSWD,GENDH,ERRSTR,"+-
-	     	"CA,PKCS7,CRL2P7,CRL,"+-
-	      	"RSA,RSAUTL,DSA,DSAPARAM,EC,ECPARAM,"+-
-	      	"X509,GENRSA,GENDSA,GENPKEY,S_SERVER,S_CLIENT,SPEED,"+-
-	      	"S_TIME,APPS,S_CB,S_SOCKET,APP_RAND,VERSION,SESS_ID,"+-
-	      	"CIPHERS,NSEQ,PKCS12,PKCS8,PKEY,PKEYPARAM,PKEYUTL,"+ -
-	      	"SPKAC,SMIME,CMS,RAND,ENGINE,OCSP,PRIME,TS"
+$ LIB_FILES = "VERIFY;ASN1PARS;REQ;DGST;DH;DHPARAM;ENC;PASSWD;GENDH;ERRSTR;"+-
+	      "CA;PKCS7;CRL2P7;CRL;"+-
+	      "RSA;RSAUTL;DSA;DSAPARAM;"+-
+	      "X509;GENRSA;GENDSA;S_SERVER;S_CLIENT;SPEED;"+-
+	      "S_TIME;APPS;S_CB;S_SOCKET;APP_RAND;VERSION;SESS_ID;"+-
+	      "CIPHERS;NSEQ;PKCS12;PKCS8;SPKAC;SMIME;RAND;ENGINE;OCSP;PRIME"
+$ APP_FILES := OPENSSL,'OBJ_DIR'VERIFY.OBJ,ASN1PARS.OBJ,REQ.OBJ,DGST.OBJ,DH.OBJ,DHPARAM.OBJ,ENC.OBJ,PASSWD.OBJ,GENDH.OBJ,ERRSTR.OBJ,-
+	       CA.OBJ,PKCS7.OBJ,CRL2P7.OBJ,CRL.OBJ,-
+	       RSA.OBJ,RSAUTL.OBJ,DSA.OBJ,DSAPARAM.OBJ,-
+	       X509.OBJ,GENRSA.OBJ,GENDSA.OBJ,S_SERVER.OBJ,S_CLIENT.OBJ,SPEED.OBJ,-
+	       S_TIME.OBJ,APPS.OBJ,S_CB.OBJ,S_SOCKET.OBJ,APP_RAND.OBJ,VERSION.OBJ,SESS_ID.OBJ,-
+	       CIPHERS.OBJ,NSEQ.OBJ,PKCS12.OBJ,PKCS8.OBJ,SPKAC.OBJ,SMIME.OBJ,RAND.OBJ,ENGINE.OBJ,OCSP.OBJ,PRIME.OBJ
 $ TCPIP_PROGRAMS = ",,"
 $ IF COMPILER .EQS. "VAXC" THEN -
      TCPIP_PROGRAMS = ",OPENSSL,"
+$!$ APP_FILES := VERIFY;ASN1PARS;REQ;DGST;DH;ENC;GENDH;ERRSTR;CA;-
+$!	       PKCS7;CRL2P7;CRL;-
+$!	       RSA;DSA;DSAPARAM;-
+$!	       X509;GENRSA;GENDSA;-
+$!	       S_SERVER,'OBJ_DIR'S_SOCKET.OBJ,'OBJ_DIR'S_CB.OBJ;-
+$!	       S_CLIENT,'OBJ_DIR'S_SOCKET.OBJ,'OBJ_DIR'S_CB.OBJ;-
+$!	       SPEED;-
+$!	       S_TIME,'OBJ_DIR'S_CB.OBJ;VERSION;SESS_ID;CIPHERS;NSEQ
+$!$ TCPIP_PROGRAMS = ",,"
+$!$ IF COMPILER .EQS. "VAXC" THEN -
+$!     TCPIP_PROGRAMS = ",S_SERVER,S_CLIENT,SESS_ID,CIPHERS,S_TIME,"
 $!
 $! Setup exceptional compilations
 $!
-$ COMPILEWITH_CC2 = ",S_SOCKET,S_SERVER,S_CLIENT,"
+$ COMPILEWITH_CC2 = ",S_SERVER,S_CLIENT,"
 $!
 $ PHASE := LIB
 $!
 $ RESTART: 
 $!
-$!  Define An App Counter And Set It To "0".
+$!  Define A File Counter And Set It To "0".
 $!
-$ APP_COUNTER = 0
+$ FILE_COUNTER = 0
 $!
-$!  Top Of The App Loop.
+$! Top Of The File Loop.
 $!
-$ NEXT_APP:
+$ NEXT_FILE:
 $!
-$!  Make The Application File Name
+$! O.K, Extract The File Name From The File List.
 $!
-$ CURRENT_APP = F$EDIT(F$ELEMENT(APP_COUNTER,",",PROGRAMS),"TRIM")
+$ FILE_NAME0 = F$EDIT(F$ELEMENT(FILE_COUNTER,";",'PHASE'_FILES),"TRIM")
+$ FILE_NAME = F$EDIT(F$ELEMENT(0,",",FILE_NAME0),"TRIM")
+$ EXTRA_OBJ = FILE_NAME0 - FILE_NAME
 $!
-$!  Create The Executable File Name.
+$! Check To See If We Are At The End Of The File List.
 $!
-$   EXE_FILE = EXE_DIR + CURRENT_APP + ".EXE"
-$!
-$!  Check To See If We Are At The End Of The File List.
-$!
-$ IF (CURRENT_APP.EQS.",")
+$ IF (FILE_NAME0.EQS.";")
 $ THEN
 $   IF (PHASE.EQS."LIB")
 $   THEN
 $     PHASE := APP
 $     GOTO RESTART
 $   ELSE
-$     GOTO APP_DONE
+$     GOTO FILE_DONE
 $   ENDIF
 $ ENDIF
 $!
-$!  Increment The Counter.
+$! Increment The Counter.
 $!
-$ APP_COUNTER = APP_COUNTER + 1
+$ FILE_COUNTER = FILE_COUNTER + 1
 $!
-$!  Decide if we're building the object files or not.
+$! Check to see if this program should actually be compiled
+$!
+$ IF PHASE .EQS. "APP" .AND. -
+     ","+PROGRAMS+"," - (","+F$EDIT(FILE_NAME,"UPCASE")+",") .EQS. ","+PROGRAMS+","
+$ THEN
+$   GOTO NEXT_FILE
+$ ENDIF
+$!
+$! Create The Source File Name.
+$!
+$ SOURCE_FILE = "SYS$DISK:[]" + FILE_NAME + ".C"
+$!
+$! Create The Object File Name.
+$!
+$ OBJECT_FILE = OBJ_DIR + FILE_NAME + ".OBJ"
+$!
+$! Create The Executable File Name.
+$!
+$ EXE_FILE = EXE_DIR + FILE_NAME + ".EXE"
+$ ON WARNING THEN GOTO NEXT_FILE
+$!
+$! Check To See If The File We Want To Compile Actually Exists.
+$!
+$ IF (F$SEARCH(SOURCE_FILE).EQS."")
+$ THEN
+$!
+$!  Tell The User That The File Dosen't Exist.
+$!
+$   WRITE SYS$OUTPUT ""
+$   WRITE SYS$OUTPUT "The File ",SOURCE_FILE," Dosen't Exist."
+$   WRITE SYS$OUTPUT ""
+$!
+$!  Exit The Build.
+$!
+$   GOTO EXIT
+$!
+$! End The File Exist Check.
+$!
+$ ENDIF
+$!
+$! Tell The User What We Are Building.
 $!
 $ IF (PHASE.EQS."LIB")
 $ THEN
+$   WRITE SYS$OUTPUT "Compiling The ",FILE_NAME,".C File."
+$ ELSE
+$   WRITE SYS$OUTPUT "Building The ",FILE_NAME," Application Program."
+$ ENDIF
 $!
-$!  Define A Library File Counter And Set It To "-1".
-$!  -1 Means The Application File Name Is To Be Used.
+$! Compile The File.
 $!
-$   LIB_COUNTER = -1
+$ ON ERROR THEN GOTO NEXT_FILE
+$ IF COMPILEWITH_CC2 - FILE_NAME .NES. COMPILEWITH_CC2
+$ THEN
+$   CC2/OBJECT='OBJECT_FILE' 'SOURCE_FILE'
+$ ELSE
+$   CC/OBJECT='OBJECT_FILE' 'SOURCE_FILE'
+$ ENDIF
 $!
-$!  Create a .OPT file for the object files
+$ ON WARNING THEN GOTO NEXT_FILE
 $!
-$   OPEN/WRITE OBJECTS 'EXE_DIR''CURRENT_APP'.OPT
-$!
-$!  Top Of The File Loop.
-$!
-$  NEXT_LIB:
-$!
-$!  O.K, Extract The File Name From The File List.
-$!
-$   IF LIB_COUNTER .GE. 0
-$   THEN
-$     FILE_NAME = F$EDIT(F$ELEMENT(LIB_COUNTER,",",LIB_'CURRENT_APP'),"TRIM")
-$   ELSE
-$     FILE_NAME = CURRENT_APP
-$   ENDIF
-$!
-$!  Check To See If We Are At The End Of The File List.
-$!
-$   IF (FILE_NAME.EQS.",")
-$   THEN
-$     CLOSE OBJECTS
-$     GOTO NEXT_APP
-$   ENDIF
-$!
-$!  Increment The Counter.
-$!
-$   LIB_COUNTER = LIB_COUNTER + 1
-$!
-$!  Create The Source File Name.
-$!
-$   SOURCE_FILE = "SYS$DISK:[]" + FILE_NAME + ".C"
-$!
-$!  Create The Object File Name.
-$!
-$   OBJECT_FILE = OBJ_DIR + FILE_NAME + ".OBJ"
-$   ON WARNING THEN GOTO NEXT_LIB
-$!
-$!  Check To See If The File We Want To Compile Actually Exists.
-$!
-$   IF (F$SEARCH(SOURCE_FILE).EQS."")
-$   THEN
-$!
-$!    Tell The User That The File Dosen't Exist.
-$!
-$     WRITE SYS$OUTPUT ""
-$     WRITE SYS$OUTPUT "The File ",SOURCE_FILE," Dosen't Exist."
-$     WRITE SYS$OUTPUT ""
-$!
-$!    Exit The Build.
-$!
-$     GOTO EXIT
-$!
-$!  End The File Exist Check.
-$!
-$   ENDIF
-$!
-$!  Tell The User What We Are Building.
-$!
-$   IF (PHASE.EQS."LIB")
-$   THEN
-$     WRITE SYS$OUTPUT "Compiling The ",FILE_NAME,".C File."
-$   ELSE
-$     WRITE SYS$OUTPUT "Building The ",FILE_NAME," Application Program."
-$   ENDIF
-$!
-$!  Compile The File.
-$!
-$   ON ERROR THEN GOTO NEXT_LIB
-$   IF COMPILEWITH_CC2 - FILE_NAME .NES. COMPILEWITH_CC2
-$   THEN
-$     CC2/OBJECT='OBJECT_FILE' 'SOURCE_FILE'
-$   ELSE
-$     CC/OBJECT='OBJECT_FILE' 'SOURCE_FILE'
-$   ENDIF
-$   WRITE OBJECTS OBJECT_FILE
-$!
-$   GOTO NEXT_LIB
+$ IF (PHASE.EQS."LIB") 
+$ THEN 
+$   GOTO NEXT_FILE
 $ ENDIF
 $!
 $!  Check if this program works well without a TCPIP library
 $!
-$ IF TCPIP_LIB .EQS. "" .AND. TCPIP_PROGRAMS - CURRENT_APP .NES. TCPIP_PROGRAMS
+$ IF TCPIP_LIB .EQS. "" .AND. TCPIP_PROGRAMS - FILE_NAME .NES. TCPIP_PROGRAMS
 $ THEN
-$   WRITE SYS$OUTPUT CURRENT_APP," needs a TCP/IP library.  Can't link.  Skipping..."
-$   GOTO NEXT_APP
+$   WRITE SYS$OUTPUT FILE_NAME," needs a TCP/IP library.  Can't link.  Skipping..."
+$   GOTO NEXT_FILE
 $ ENDIF
 $!
 $! Link The Program.
 $! Check To See If We Are To Link With A Specific TCP/IP Library.
 $!
-$ ON WARNING THEN GOTO NEXT_APP
-$!
 $ IF (TCPIP_LIB.NES."")
 $ THEN
 $!
 $! Don't Link With The RSAREF Routines And TCP/IP Library.
 $!
 $   LINK/'DEBUGGER'/'TRACEBACK' /EXE='EXE_FILE' -
-	'EXE_DIR''CURRENT_APP'.OPT/OPTION, -
+	'OBJECT_FILE''EXTRA_OBJ', -
         'SSL_LIB'/LIBRARY,'CRYPTO_LIB'/LIBRARY, -
         'TCPIP_LIB','OPT_FILE'/OPTION
 $!
@@ -317,7 +297,7 @@ $!
 $! Don't Link With The RSAREF Routines And Link With A TCP/IP Library.
 $!
 $   LINK/'DEBUGGER'/'TRACEBACK' /EXE='EXE_FILE' -
-	'EXE_DIR''CURRENT_APP'.OPT/OPTION, -
+	'OBJECT_FILE''EXTRA_OBJ', -
         'SSL_LIB'/LIBRARY,'CRYPTO_LIB'/LIBRARY, -
         'OPT_FILE'/OPTION
 $!
@@ -327,11 +307,11 @@ $ ENDIF
 $!
 $! Go Back And Do It Again.
 $!
-$ GOTO NEXT_APP
+$ GOTO NEXT_FILE
 $!
 $! All Done With This File.
 $!
-$ APP_DONE:
+$ FILE_DONE:
 $ EXIT:
 $!
 $! All Done, Time To Clean Up And Exit.
@@ -432,19 +412,19 @@ $!    Else...
 $!
 $     ELSE
 $!
-$!      Create The non-VAX Linker Option File.
+$!      Create The AXP Linker Option File.
 $!
 $       CREATE 'OPT_FILE'
 $DECK
 !
-! Default System Options File For non-VAX To Link Agianst 
+! Default System Options File For AXP To Link Agianst 
 ! The Sharable C Runtime Library.
 !
 SYS$SHARE:CMA$OPEN_LIB_SHR/SHARE
 SYS$SHARE:CMA$OPEN_RTL/SHARE
 $EOD
 $!
-$!    End The DEC C Option File Check.
+$!    End The VAX/AXP DEC C Option File Check.
 $!
 $     ENDIF
 $!
@@ -562,7 +542,7 @@ $!    Time To EXIT.
 $!
 $     EXIT
 $!
-$!  End The Valid Argument Check.
+$!  End The Valid Arguement Check.
 $!
 $   ENDIF
 $!
@@ -570,58 +550,6 @@ $! End The P1 Check.
 $!
 $ ENDIF
 $!
-$! Check To See If P6 Is Blank.
-$!
-$ IF (P6.EQS."")
-$ THEN
-$   POINTER_SIZE = ""
-$ ELSE
-$!
-$!  Check is P6 Is Valid
-$!
-$   IF (P6.EQS."32")
-$   THEN
-$     POINTER_SIZE = "/POINTER_SIZE=32"
-$     IF ARCH .EQS. "VAX"
-$     THEN
-$       LIB32 = ""
-$     ELSE
-$       LIB32 = "32"
-$     ENDIF
-$   ELSE
-$     IF (P6.EQS."64")
-$     THEN
-$       LIB32 = ""
-$       IF ARCH .EQS. "VAX"
-$       THEN
-$         POINTER_SIZE = "/POINTER_SIZE=32"
-$       ELSE
-$         POINTER_SIZE = "/POINTER_SIZE=64"
-$       ENDIF
-$     ELSE
-$!
-$!      Tell The User Entered An Invalid Option..
-$!
-$       WRITE SYS$OUTPUT ""
-$       WRITE SYS$OUTPUT "The Option ",P6," Is Invalid.  The Valid Options Are:"
-$       WRITE SYS$OUTPUT ""
-$       WRITE SYS$OUTPUT "    32  :  Compile with 32 bit pointer size"
-$       WRITE SYS$OUTPUT "    64  :  Compile with 64 bit pointer size"
-$       WRITE SYS$OUTPUT ""
-$!
-$!      Time To EXIT.
-$!
-$       GOTO TIDY
-$!
-$!      End The Valid Arguement Check.
-$!
-$     ENDIF
-$   ENDIF
-$!
-$! End The P6 Check.
-$!
-$ ENDIF
-$!
 $! Check To See If P2 Is Blank.
 $!
 $ IF (P2.EQS."")
@@ -645,7 +573,7 @@ $   ELSE
 $!
 $!  Check To See If We Have VAXC Or DECC.
 $!
-$     IF (ARCH.NES."VAX").OR.(F$TRNLNM("DECC$CC_DEFAULT").NES."")
+$     IF (ARCH.EQS."AXP").OR.(F$TRNLNM("DECC$CC_DEFAULT").NES."")
 $     THEN 
 $!
 $!      Looks Like DECC, Set To Use DECC.
@@ -749,13 +677,13 @@ $!
 $     CC = "CC"
 $     IF ARCH.EQS."VAX" .AND. F$TRNLNM("DECC$CC_DEFAULT").NES."/DECC" -
 	 THEN CC = "CC/DECC"
-$     CC = CC + "/''CC_OPTIMIZE'/''DEBUGGER'/STANDARD=ANSI89''POINTER_SIZE'" + -
+$     CC = CC + "/''CC_OPTIMIZE'/''DEBUGGER'/STANDARD=ANSI89" + -
            "/NOLIST/PREFIX=ALL" + -
 	   "/INCLUDE=(SYS$DISK:[-],SYS$DISK:[-.CRYPTO])" + CCEXTRAFLAGS
 $!
 $!    Define The Linker Options File Name.
 $!
-$     OPT_FILE = "''EXE_DIR'VAX_DECC_OPTIONS.OPT"
+$     OPT_FILE = "SYS$DISK:[]VAX_DECC_OPTIONS.OPT"
 $!
 $!  End DECC Check.
 $!
@@ -776,9 +704,9 @@ $!
 $!    Compile Using VAXC.
 $!
 $     CC = "CC"
-$     IF ARCH.NES."VAX"
+$     IF ARCH.EQS."AXP"
 $     THEN
-$	WRITE SYS$OUTPUT "There is no VAX C on ''ARCH'!"
+$	WRITE SYS$OUTPUT "There is no VAX C on Alpha!"
 $	EXIT
 $     ENDIF
 $     IF F$TRNLNM("DECC$CC_DEFAULT").EQS."/DECC" THEN CC = "CC/VAXC"
@@ -792,7 +720,7 @@ $     DEFINE/NOLOG SYS SYS$COMMON:[SYSLIB]
 $!
 $!    Define The Linker Options File Name.
 $!
-$     OPT_FILE = "''EXE_DIR'VAX_VAXC_OPTIONS.OPT"
+$     OPT_FILE = "SYS$DISK:[]VAX_VAXC_OPTIONS.OPT"
 $!
 $!  End VAXC Check
 $!
@@ -819,7 +747,7 @@ $     CC = GCC+"/NOCASE_HACK/''GCC_OPTIMIZE'/''DEBUGGER'/NOLIST" + -
 $!
 $!    Define The Linker Options File Name.
 $!
-$     OPT_FILE = "''EXE_DIR'VAX_GNUC_OPTIONS.OPT"
+$     OPT_FILE = "SYS$DISK:[]VAX_GNUC_OPTIONS.OPT"
 $!
 $!  End The GNU C Check.
 $!
@@ -829,7 +757,7 @@ $!  Set up default defines
 $!
 $   CCDEFS = """FLAT_INC=1""," + CCDEFS
 $!
-$!  Else The User Entered An Invalid Argument.
+$!  Else The User Entered An Invalid Arguement.
 $!
 $ ELSE
 $!
@@ -934,7 +862,7 @@ $!  Print info
 $!
 $   WRITE SYS$OUTPUT "TCP/IP library spec: ", TCPIP_LIB
 $!
-$!  Else The User Entered An Invalid Argument.
+$!  Else The User Entered An Invalid Arguement.
 $!
 $ ELSE
 $!

apps/nseq.c

@@ -1,5 +1,5 @@
 /* nseq.c */
-/* Written by Dr Stephen N Henson (steve@openssl.org) for the OpenSSL
+/* Written by Dr Stephen N Henson (shenson@bigfoot.com) for the OpenSSL
  * project 1999.
  */
 /* ====================================================================

apps/ocsp.c

@@ -1,5 +1,5 @@
 /* ocsp.c */
-/* Written by Dr Stephen N Henson (steve@openssl.org) for the OpenSSL
+/* Written by Dr Stephen N Henson (shenson@bigfoot.com) for the OpenSSL
  * project 2000.
  */
 /* ====================================================================
@@ -57,52 +57,24 @@
  */
 #ifndef OPENSSL_NO_OCSP
 
-#ifdef OPENSSL_SYS_VMS
-#define _XOPEN_SOURCE_EXTENDED	/* So fd_set and friends get properly defined
-				   on OpenVMS */
-#endif
-
-#define USE_SOCKETS
-
 #include <stdio.h>
-#include <stdlib.h>
 #include <string.h>
-#include <time.h>
-#include "apps.h" /* needs to be included before the openssl headers! */
-#include <openssl/e_os2.h>
-#include <openssl/crypto.h>
+#include "apps.h"
+#include <openssl/pem.h>
+#include <openssl/ocsp.h>
 #include <openssl/err.h>
 #include <openssl/ssl.h>
-#include <openssl/evp.h>
-#include <openssl/bn.h>
-#include <openssl/x509v3.h>
-
-#if defined(NETWARE_CLIB)
-#  ifdef NETWARE_BSDSOCK
-#    include <sys/socket.h>
-#    include <sys/bsdskt.h>
-#  else
-#    include <novsock2.h>
-#  endif
-#elif defined(NETWARE_LIBC)
-#  ifdef NETWARE_BSDSOCK
-#    include <sys/select.h>
-#  else
-#    include <novsock2.h>
-#  endif
-#endif
 
 /* Maximum leeway in validity period: default 5 minutes */
 #define MAX_VALIDITY_PERIOD	(5 * 60)
 
-static int add_ocsp_cert(OCSP_REQUEST **req, X509 *cert, const EVP_MD *cert_id_md, X509 *issuer,
+static int add_ocsp_cert(OCSP_REQUEST **req, X509 *cert, X509 *issuer,
 				STACK_OF(OCSP_CERTID) *ids);
-static int add_ocsp_serial(OCSP_REQUEST **req, char *serial, const EVP_MD * cert_id_md, X509 *issuer,
+static int add_ocsp_serial(OCSP_REQUEST **req, char *serial, X509 *issuer,
 				STACK_OF(OCSP_CERTID) *ids);
 static int print_ocsp_summary(BIO *out, OCSP_BASICRESP *bs, OCSP_REQUEST *req,
-			      STACK_OF(OPENSSL_STRING) *names,
-			      STACK_OF(OCSP_CERTID) *ids, long nsec,
-			      long maxage);
+				STACK *names, STACK_OF(OCSP_CERTID) *ids,
+				long nsec, long maxage);
 
 static int make_ocsp_response(OCSP_RESPONSE **resp, OCSP_REQUEST *req, CA_DB *db,
 			X509 *ca, X509 *rcert, EVP_PKEY *rkey,
@@ -113,9 +85,6 @@ static char **lookup_serial(CA_DB *db, ASN1_INTEGER *ser);
 static BIO *init_responder(char *port);
 static int do_responder(OCSP_REQUEST **preq, BIO **pcbio, BIO *acbio, char *port);
 static int send_ocsp_response(BIO *cbio, OCSP_RESPONSE *resp);
-static OCSP_RESPONSE *query_responder(BIO *err, BIO *cbio, char *path,
-				STACK_OF(CONF_VALUE) *headers,
-				OCSP_REQUEST *req, int req_timeout);
 
 #undef PROG
 #define PROG ocsp_main
@@ -133,7 +102,6 @@ int MAIN(int argc, char **argv)
 	char *rsignfile = NULL, *rkeyfile = NULL;
 	char *outfile = NULL;
 	int add_nonce = 1, noverify = 0, use_ssl = -1;
-	STACK_OF(CONF_VALUE) *headers = NULL;
 	OCSP_REQUEST *req = NULL;
 	OCSP_RESPONSE *resp = NULL;
 	OCSP_BASICRESP *bs = NULL;
@@ -143,11 +111,11 @@ int MAIN(int argc, char **argv)
 	BIO *acbio = NULL, *cbio = NULL;
 	BIO *derbio = NULL;
 	BIO *out = NULL;
-	int req_timeout = -1;
 	int req_text = 0, resp_text = 0;
 	long nsec = MAX_VALIDITY_PERIOD, maxage = -1;
 	char *CAfile = NULL, *CApath = NULL;
 	X509_STORE *store = NULL;
+	SSL_CTX *ctx = NULL;
 	STACK_OF(X509) *sign_other = NULL, *verify_other = NULL, *rother = NULL;
 	char *sign_certfile = NULL, *verify_certfile = NULL, *rcertfile = NULL;
 	unsigned long sign_flags = 0, verify_flags = 0, rflags = 0;
@@ -156,7 +124,7 @@ int MAIN(int argc, char **argv)
 	int badarg = 0;
 	int i;
 	int ignore_err = 0;
-	STACK_OF(OPENSSL_STRING) *reqnames = NULL;
+	STACK *reqnames = NULL;
 	STACK_OF(OCSP_CERTID) *ids = NULL;
 
 	X509 *rca_cert = NULL;
@@ -164,16 +132,14 @@ int MAIN(int argc, char **argv)
 	char *rca_filename = NULL;
 	CA_DB *rdb = NULL;
 	int nmin = 0, ndays = -1;
-	const EVP_MD *cert_id_md = NULL;
 
 	if (bio_err == NULL) bio_err = BIO_new_fp(stderr, BIO_NOCLOSE);
 
 	if (!load_config(bio_err, NULL))
 		goto end;
 	SSL_load_error_strings();
-	OpenSSL_add_ssl_algorithms();
 	args = argv + 1;
-	reqnames = sk_OPENSSL_STRING_new_null();
+	reqnames = sk_new_null();
 	ids = sk_OCSP_CERTID_new_null();
 	while (!badarg && *args && *args[0] == '-')
 		{
@@ -186,22 +152,6 @@ int MAIN(int argc, char **argv)
 				}
 			else badarg = 1;
 			}
-		else if (!strcmp(*args, "-timeout"))
-			{
-			if (args[1])
-				{
-				args++;
-				req_timeout = atol(*args);
-				if (req_timeout < 0)
-					{
-					BIO_printf(bio_err,
-						"Illegal timeout value %s\n",
-						*args);
-					badarg = 1;
-					}
-				}
-			else badarg = 1;
-			}
 		else if (!strcmp(*args, "-url"))
 			{
 			if (args[1])
@@ -233,16 +183,6 @@ int MAIN(int argc, char **argv)
 				}
 			else badarg = 1;
 			}
-		else if (!strcmp(*args, "-header"))
-			{
-			if (args[1] && args[2])
-				{
-				if (!X509V3_add_value(args[1], args[2], &headers))
-					goto end;
-				args += 2;
-				}
-			else badarg = 1;
-			}
 		else if (!strcmp(*args, "-ignore_err"))
 			ignore_err = 1;
 		else if (!strcmp(*args, "-noverify"))
@@ -442,10 +382,9 @@ int MAIN(int argc, char **argv)
 				cert = load_cert(bio_err, *args, FORMAT_PEM,
 					NULL, e, "certificate");
 				if(!cert) goto end;
-				if (!cert_id_md) cert_id_md = EVP_sha1();
-				if(!add_ocsp_cert(&req, cert, cert_id_md, issuer, ids))
+				if(!add_ocsp_cert(&req, cert, issuer, ids))
 					goto end;
-				if(!sk_OPENSSL_STRING_push(reqnames, *args))
+				if(!sk_push(reqnames, *args))
 					goto end;
 				}
 			else badarg = 1;
@@ -455,10 +394,9 @@ int MAIN(int argc, char **argv)
 			if (args[1])
 				{
 				args++;
-				if (!cert_id_md) cert_id_md = EVP_sha1();
-				if(!add_ocsp_serial(&req, *args, cert_id_md, issuer, ids))
+				if(!add_ocsp_serial(&req, *args, issuer, ids))
 					goto end;
-				if(!sk_OPENSSL_STRING_push(reqnames, *args))
+				if(!sk_push(reqnames, *args))
 					goto end;
 				}
 			else badarg = 1;
@@ -558,10 +496,7 @@ int MAIN(int argc, char **argv)
 				}
 			else badarg = 1;
 			}
-		else if ((cert_id_md = EVP_get_digestbyname((*args)+1))==NULL)
-			{
-			badarg = 1;
-			}
+		else badarg = 1;
 		args++;
 		}
 
@@ -617,7 +552,6 @@ int MAIN(int argc, char **argv)
 		BIO_printf (bio_err, "-ndays n	 	 number of days before next update\n");
 		BIO_printf (bio_err, "-resp_key_id       identify reponse by signing certificate key ID\n");
 		BIO_printf (bio_err, "-nrequest n        number of requests to accept (default unlimited)\n");
-		BIO_printf (bio_err, "-<dgst alg>     use specified digest in the request");
 		goto end;
 		}
 
@@ -724,8 +658,7 @@ int MAIN(int argc, char **argv)
 			"signer private key");
 		if (!key)
 			goto end;
-
-		if (!OCSP_request_sign(req, signer, key, NULL, sign_other, sign_flags))
+		if (!OCSP_request_sign(req, signer, key, EVP_sha1(), sign_other, sign_flags))
 			{
 			BIO_printf(bio_err, "Error signing OCSP request\n");
 			goto end;
@@ -768,14 +701,47 @@ int MAIN(int argc, char **argv)
 	else if (host)
 		{
 #ifndef OPENSSL_NO_SOCK
-		resp = process_responder(bio_err, req, host, path,
-					port, use_ssl, headers, req_timeout);
-		if (!resp)
-			goto end;
+		cbio = BIO_new_connect(host);
 #else
 		BIO_printf(bio_err, "Error creating connect BIO - sockets not supported.\n");
 		goto end;
 #endif
+		if (!cbio)
+			{
+			BIO_printf(bio_err, "Error creating connect BIO\n");
+			goto end;
+			}
+		if (port) BIO_set_conn_port(cbio, port);
+		if (use_ssl == 1)
+			{
+			BIO *sbio;
+#if !defined(OPENSSL_NO_SSL2) && !defined(OPENSSL_NO_SSL3)
+			ctx = SSL_CTX_new(SSLv23_client_method());
+#elif !defined(OPENSSL_NO_SSL3)
+			ctx = SSL_CTX_new(SSLv3_client_method());
+#elif !defined(OPENSSL_NO_SSL2)
+			ctx = SSL_CTX_new(SSLv2_client_method());
+#else
+			BIO_printf(bio_err, "SSL is disabled\n");
+			goto end;
+#endif
+			SSL_CTX_set_mode(ctx, SSL_MODE_AUTO_RETRY);
+			sbio = BIO_new_ssl(ctx, 1);
+			cbio = BIO_push(sbio, cbio);
+			}
+		if (BIO_do_connect(cbio) <= 0)
+			{
+			BIO_printf(bio_err, "Error connecting BIO\n");
+			goto end;
+			}
+		resp = OCSP_sendreq_bio(cbio, path, req);
+		BIO_free_all(cbio);
+		cbio = NULL;
+		if (!resp)
+			{
+			BIO_printf(bio_err, "Error querying OCSP responsder\n");
+			goto end;
+			}
 		}
 	else if (respin)
 		{
@@ -818,7 +784,7 @@ int MAIN(int argc, char **argv)
 
 	if (i != OCSP_RESPONSE_STATUS_SUCCESSFUL)
 		{
-		BIO_printf(out, "Responder Error: %s (%d)\n",
+		BIO_printf(out, "Responder Error: %s (%ld)\n",
 				OCSP_response_status_str(i), i);
 		if (ignore_err)
 			goto redo_accept;
@@ -884,7 +850,7 @@ int MAIN(int argc, char **argv)
 
 		if(i <= 0)
 			{
-			BIO_printf(bio_err, "Response Verify Failure\n");
+			BIO_printf(bio_err, "Response Verify Failure\n", i);
 			ERR_print_errors(bio_err);
 			}
 		else
@@ -914,23 +880,23 @@ end:
 	OCSP_REQUEST_free(req);
 	OCSP_RESPONSE_free(resp);
 	OCSP_BASICRESP_free(bs);
-	sk_OPENSSL_STRING_free(reqnames);
+	sk_free(reqnames);
 	sk_OCSP_CERTID_free(ids);
 	sk_X509_pop_free(sign_other, X509_free);
 	sk_X509_pop_free(verify_other, X509_free);
-	sk_CONF_VALUE_pop_free(headers, X509V3_conf_free);
 
 	if (use_ssl != -1)
 		{
 		OPENSSL_free(host);
 		OPENSSL_free(port);
 		OPENSSL_free(path);
+		SSL_CTX_free(ctx);
 		}
 
 	OPENSSL_EXIT(ret);
 }
 
-static int add_ocsp_cert(OCSP_REQUEST **req, X509 *cert, const EVP_MD *cert_id_md,X509 *issuer,
+static int add_ocsp_cert(OCSP_REQUEST **req, X509 *cert, X509 *issuer,
 				STACK_OF(OCSP_CERTID) *ids)
 	{
 	OCSP_CERTID *id;
@@ -941,7 +907,7 @@ static int add_ocsp_cert(OCSP_REQUEST **req, X509 *cert, const EVP_MD *cert_id_m
 		}
 	if(!*req) *req = OCSP_REQUEST_new();
 	if(!*req) goto err;
-	id = OCSP_cert_to_id(cert_id_md, cert, issuer);
+	id = OCSP_cert_to_id(NULL, cert, issuer);
 	if(!id || !sk_OCSP_CERTID_push(ids, id)) goto err;
 	if(!OCSP_request_add0_id(*req, id)) goto err;
 	return 1;
@@ -951,7 +917,7 @@ static int add_ocsp_cert(OCSP_REQUEST **req, X509 *cert, const EVP_MD *cert_id_m
 	return 0;
 	}
 
-static int add_ocsp_serial(OCSP_REQUEST **req, char *serial,const EVP_MD *cert_id_md, X509 *issuer,
+static int add_ocsp_serial(OCSP_REQUEST **req, char *serial, X509 *issuer,
 				STACK_OF(OCSP_CERTID) *ids)
 	{
 	OCSP_CERTID *id;
@@ -973,7 +939,7 @@ static int add_ocsp_serial(OCSP_REQUEST **req, char *serial,const EVP_MD *cert_i
 		BIO_printf(bio_err, "Error converting serial number %s\n", serial);
 		return 0;
 		}
-	id = OCSP_cert_id_new(cert_id_md, iname, ikey, sno);
+	id = OCSP_cert_id_new(EVP_sha1(), iname, ikey, sno);
 	ASN1_INTEGER_free(sno);
 	if(!id || !sk_OCSP_CERTID_push(ids, id)) goto err;
 	if(!OCSP_request_add0_id(*req, id)) goto err;
@@ -985,9 +951,8 @@ static int add_ocsp_serial(OCSP_REQUEST **req, char *serial,const EVP_MD *cert_i
 	}
 
 static int print_ocsp_summary(BIO *out, OCSP_BASICRESP *bs, OCSP_REQUEST *req,
-			      STACK_OF(OPENSSL_STRING) *names,
-			      STACK_OF(OCSP_CERTID) *ids, long nsec,
-			      long maxage)
+					STACK *names, STACK_OF(OCSP_CERTID) *ids,
+					long nsec, long maxage)
 	{
 	OCSP_CERTID *id;
 	char *name;
@@ -997,13 +962,13 @@ static int print_ocsp_summary(BIO *out, OCSP_BASICRESP *bs, OCSP_REQUEST *req,
 
 	ASN1_GENERALIZEDTIME *rev, *thisupd, *nextupd;
 
-	if (!bs || !req || !sk_OPENSSL_STRING_num(names) || !sk_OCSP_CERTID_num(ids))
+	if (!bs || !req || !sk_num(names) || !sk_OCSP_CERTID_num(ids))
 		return 1;
 
 	for (i = 0; i < sk_OCSP_CERTID_num(ids); i++)
 		{
 		id = sk_OCSP_CERTID_value(ids, i);
-		name = sk_OPENSSL_STRING_value(names, i);
+		name = sk_value(names, i);
 		BIO_printf(out, "%s: ", name);
 
 		if(!OCSP_resp_find_status(bs, id, &status, &reason,
@@ -1060,6 +1025,7 @@ static int make_ocsp_response(OCSP_RESPONSE **resp, OCSP_REQUEST *req, CA_DB *db
 	OCSP_BASICRESP *bs = NULL;
 	int i, id_count, ret = 1;
 
+
 	id_count = OCSP_request_onereq_count(req);
 
 	if (id_count <= 0)
@@ -1068,6 +1034,7 @@ static int make_ocsp_response(OCSP_RESPONSE **resp, OCSP_REQUEST *req, CA_DB *db
 		goto end;
 		}
 
+	ca_id = OCSP_cert_to_id(EVP_sha1(), NULL, ca);
 
 	bs = OCSP_BASICRESP_new();
 	thisupd = X509_gmtime_adj(NULL, 0);
@@ -1080,23 +1047,8 @@ static int make_ocsp_response(OCSP_RESPONSE **resp, OCSP_REQUEST *req, CA_DB *db
 		OCSP_ONEREQ *one;
 		ASN1_INTEGER *serial;
 		char **inf;
-		ASN1_OBJECT *cert_id_md_oid;
-		const EVP_MD *cert_id_md;
 		one = OCSP_request_onereq_get0(req, i);
 		cid = OCSP_onereq_get0_id(one);
-
-		OCSP_id_get0_info(NULL,&cert_id_md_oid, NULL,NULL, cid);
-
-		cert_id_md = EVP_get_digestbyobj(cert_id_md_oid);	
-		if (! cert_id_md) 
-			{
-			*resp = OCSP_response_create(OCSP_RESPONSE_STATUS_INTERNALERROR,
-				NULL);
-				goto end;
-			}	
-		if (ca_id) OCSP_CERTID_free(ca_id);
-		ca_id = OCSP_cert_to_id(cert_id_md, NULL, ca);
-
 		/* Is this request about our CA? */
 		if (OCSP_id_issuer_cmp(ca_id, cid))
 			{
@@ -1142,7 +1094,7 @@ static int make_ocsp_response(OCSP_RESPONSE **resp, OCSP_REQUEST *req, CA_DB *db
 
 	OCSP_copy_nonce(bs, req);
 		
-	OCSP_basic_sign(bs, rcert, rkey, NULL, rother, flags);
+	OCSP_basic_sign(bs, rcert, rkey, EVP_sha1(), rother, flags);
 
 	*resp = OCSP_response_create(OCSP_RESPONSE_STATUS_SUCCESSFUL, bs);
 
@@ -1162,7 +1114,6 @@ static char **lookup_serial(CA_DB *db, ASN1_INTEGER *ser)
 	char *itmp, *row[DB_NUMBER],**rrow;
 	for (i = 0; i < DB_NUMBER; i++) row[i] = NULL;
 	bn = ASN1_INTEGER_to_BN(ser,NULL);
-	OPENSSL_assert(bn); /* FIXME: should report an error at this point and abort */
 	if (BN_is_zero(bn))
 		itmp = BUF_strdup("00");
 	else
@@ -1269,153 +1220,8 @@ static int send_ocsp_response(BIO *cbio, OCSP_RESPONSE *resp)
 		return 0;
 	BIO_printf(cbio, http_resp, i2d_OCSP_RESPONSE(resp, NULL));
 	i2d_OCSP_RESPONSE_bio(cbio, resp);
-	(void)BIO_flush(cbio);
+	BIO_flush(cbio);
 	return 1;
 	}
 
-static OCSP_RESPONSE *query_responder(BIO *err, BIO *cbio, char *path,
-				STACK_OF(CONF_VALUE) *headers,
-				OCSP_REQUEST *req, int req_timeout)
-	{
-	int fd;
-	int rv;
-	int i;
-	OCSP_REQ_CTX *ctx = NULL;
-	OCSP_RESPONSE *rsp = NULL;
-	fd_set confds;
-	struct timeval tv;
-
-	if (req_timeout != -1)
-		BIO_set_nbio(cbio, 1);
-
-	rv = BIO_do_connect(cbio);
-
-	if ((rv <= 0) && ((req_timeout == -1) || !BIO_should_retry(cbio)))
-		{
-		BIO_puts(err, "Error connecting BIO\n");
-		return NULL;
-		}
-
-	if (BIO_get_fd(cbio, &fd) <= 0)
-		{
-		BIO_puts(err, "Can't get connection fd\n");
-		goto err;
-		}
-
-	if (req_timeout != -1 && rv <= 0)
-		{
-		FD_ZERO(&confds);
-		openssl_fdset(fd, &confds);
-		tv.tv_usec = 0;
-		tv.tv_sec = req_timeout;
-		rv = select(fd + 1, NULL, (void *)&confds, NULL, &tv);
-		if (rv == 0)
-			{
-			BIO_puts(err, "Timeout on connect\n");
-			return NULL;
-			}
-		}
-
-
-	ctx = OCSP_sendreq_new(cbio, path, NULL, -1);
-	if (!ctx)
-		return NULL;
-
-	for (i = 0; i < sk_CONF_VALUE_num(headers); i++)
-		{
-		CONF_VALUE *hdr = sk_CONF_VALUE_value(headers, i);
-		if (!OCSP_REQ_CTX_add1_header(ctx, hdr->name, hdr->value))
-			goto err;
-		}
-
-	if (!OCSP_REQ_CTX_set1_req(ctx, req))
-		goto err;
-	
-	for (;;)
-		{
-		rv = OCSP_sendreq_nbio(&rsp, ctx);
-		if (rv != -1)
-			break;
-		if (req_timeout == -1)
-			continue;
-		FD_ZERO(&confds);
-		openssl_fdset(fd, &confds);
-		tv.tv_usec = 0;
-		tv.tv_sec = req_timeout;
-		if (BIO_should_read(cbio))
-			rv = select(fd + 1, (void *)&confds, NULL, NULL, &tv);
-		else if (BIO_should_write(cbio))
-			rv = select(fd + 1, NULL, (void *)&confds, NULL, &tv);
-		else
-			{
-			BIO_puts(err, "Unexpected retry condition\n");
-			goto err;
-			}
-		if (rv == 0)
-			{
-			BIO_puts(err, "Timeout on request\n");
-			break;
-			}
-		if (rv == -1)
-			{
-			BIO_puts(err, "Select error\n");
-			break;
-			}
-
-		}
-	err:
-	if (ctx)
-		OCSP_REQ_CTX_free(ctx);
-
-	return rsp;
-	}
-
-OCSP_RESPONSE *process_responder(BIO *err, OCSP_REQUEST *req,
-			char *host, char *path, char *port, int use_ssl,
-			STACK_OF(CONF_VALUE) *headers,
-			int req_timeout)
-	{
-	BIO *cbio = NULL;
-	SSL_CTX *ctx = NULL;
-	OCSP_RESPONSE *resp = NULL;
-	cbio = BIO_new_connect(host);
-	if (!cbio)
-		{
-		BIO_printf(err, "Error creating connect BIO\n");
-		goto end;
-		}
-	if (port) BIO_set_conn_port(cbio, port);
-	if (use_ssl == 1)
-		{
-		BIO *sbio;
-#if !defined(OPENSSL_NO_SSL2) && !defined(OPENSSL_NO_SSL3)
-		ctx = SSL_CTX_new(SSLv23_client_method());
-#elif !defined(OPENSSL_NO_SSL3)
-		ctx = SSL_CTX_new(SSLv3_client_method());
-#elif !defined(OPENSSL_NO_SSL2)
-		ctx = SSL_CTX_new(SSLv2_client_method());
-#else
-		BIO_printf(err, "SSL is disabled\n");
-			goto end;
-#endif
-		if (ctx == NULL)
-			{
-			BIO_printf(err, "Error creating SSL context.\n");
-			goto end;
-			}
-		SSL_CTX_set_mode(ctx, SSL_MODE_AUTO_RETRY);
-		sbio = BIO_new_ssl(ctx, 1);
-		cbio = BIO_push(sbio, cbio);
-		}
-	resp = query_responder(err, cbio, path, headers, req, req_timeout);
-	if (!resp)
-		BIO_printf(bio_err, "Error querying OCSP responsder\n");
-	end:
-	if (cbio)
-		BIO_free_all(cbio);
-	if (ctx)
-		SSL_CTX_free(ctx);
-	return resp;
-	}
-
 #endif

apps/openssl-vms.cnf

@@ -21,17 +21,12 @@ oid_section		= new_oids
 
 [ new_oids ]
 
-# We can add new OIDs in here for use by 'ca', 'req' and 'ts'.
+# We can add new OIDs in here for use by 'ca' and 'req'.
 # Add a simple OID like this:
 # testoid1=1.2.3.4
 # Or use config file substitution like this:
 # testoid2=${testoid1}.5.6
 
-# Policies used by the TSA examples.
-tsa_policy1 = 1.2.3.4.1
-tsa_policy2 = 1.2.3.4.5.6
-tsa_policy3 = 1.2.3.4.5.7
-
 ####################################################################
 [ ca ]
 default_ca	= CA_default		# The default ca section
@@ -49,8 +44,8 @@ new_certs_dir	= $dir.newcerts]		# default place for new certs.
 
 certificate	= $dir]cacert.pem 	# The CA certificate
 serial		= $dir]serial. 		# The current serial number
-crlnumber	= $dir]crlnumber.	# the current crl number
-					# must be commented out to leave a V1 CRL
+#crlnumber	= $dir]crlnumber.	# the current crl number must be
+					# commented out to leave a V1 CRL
 crl		= $dir]crl.pem 		# The current CRL
 private_key	= $dir.private]cakey.pem# The private key
 RANDFILE	= $dir.private].rand	# private random number file
@@ -72,7 +67,7 @@ cert_opt 	= ca_default		# Certificate field options
 
 default_days	= 365			# how long to certify for
 default_crl_days= 30			# how long before next CRL
-default_md	= default		# use public key default MD
+default_md	= md5			# which md to use.
 preserve	= no			# keep passed DN ordering
 
 # A few difference way of specifying how similar the request should look
@@ -115,12 +110,13 @@ x509_extensions	= v3_ca	# The extentions to add to the self signed cert
 
 # This sets a mask for permitted string types. There are several options. 
 # default: PrintableString, T61String, BMPString.
-# pkix	 : PrintableString, BMPString (PKIX recommendation before 2004)
-# utf8only: only UTF8Strings (PKIX recommendation after 2004).
+# pkix	 : PrintableString, BMPString.
+# utf8only: only UTF8Strings.
 # nombstr : PrintableString, T61String (no BMPStrings or UTF8Strings).
 # MASK:XXXX a literal mask value.
-# WARNING: ancient versions of Netscape crash on BMPStrings or UTF8Strings.
-string_mask = utf8only
+# WARNING: current versions of Netscape crash on BMPStrings or UTF8Strings
+# so use this option with caution!
+string_mask = nombstr
 
 # req_extensions = v3_req # The extensions to add to a certificate request
 
@@ -192,7 +188,7 @@ nsComment			= "OpenSSL Generated Certificate"
 
 # PKIX recommendations harmless if included in all certificates.
 subjectKeyIdentifier=hash
-authorityKeyIdentifier=keyid,issuer
+authorityKeyIdentifier=keyid,issuer:always
 
 # This stuff is for subjectAltName and issuerAltname.
 # Import the email address.
@@ -211,9 +207,6 @@ authorityKeyIdentifier=keyid,issuer
 #nsCaPolicyUrl
 #nsSslServerName
 
-# This is required for TSA certificates.
-# extendedKeyUsage = critical,timeStamping
-
 [ v3_req ]
 
 # Extensions to add to a certificate request
@@ -231,7 +224,7 @@ keyUsage = nonRepudiation, digitalSignature, keyEncipherment
 
 subjectKeyIdentifier=hash
 
-authorityKeyIdentifier=keyid:always,issuer
+authorityKeyIdentifier=keyid:always,issuer:always
 
 # This is what PKIX recommends but some broken software chokes on critical
 # extensions.
@@ -264,7 +257,7 @@ basicConstraints = CA:true
 # Only issuerAltName and authorityKeyIdentifier make any sense in a CRL.
 
 # issuerAltName=issuer:copy
-authorityKeyIdentifier=keyid:always
+authorityKeyIdentifier=keyid:always,issuer:always
 
 [ proxy_cert_ext ]
 # These extensions should be added when creating a proxy certificate
@@ -297,7 +290,7 @@ nsComment			= "OpenSSL Generated Certificate"
 
 # PKIX recommendations harmless if included in all certificates.
 subjectKeyIdentifier=hash
-authorityKeyIdentifier=keyid,issuer
+authorityKeyIdentifier=keyid,issuer:always
 
 # This stuff is for subjectAltName and issuerAltname.
 # Import the email address.
@@ -318,33 +311,3 @@ authorityKeyIdentifier=keyid,issuer
 
 # This really needs to be in place for it to be a proxy certificate.
 proxyCertInfo=critical,language:id-ppl-anyLanguage,pathlen:3,policy:foo
-
-####################################################################
-[ tsa ]
-
-default_tsa = tsa_config1	# the default TSA section
-
-[ tsa_config1 ]
-
-# These are used by the TSA reply generation only.
-dir		= sys\$disk:[.demoCA		# TSA root directory
-serial		= $dir]tsaserial.	# The current serial number (mandatory)
-crypto_device	= builtin		# OpenSSL engine to use for signing
-signer_cert	= $dir/tsacert.pem 	# The TSA signing certificate
-					# (optional)
-certs		= $dir.cacert.pem]	# Certificate chain to include in reply
-					# (optional)
-signer_key	= $dir/private/tsakey.pem # The TSA private key (optional)
-
-default_policy	= tsa_policy1		# Policy if request did not specify it
-					# (optional)
-other_policies	= tsa_policy2, tsa_policy3	# acceptable policies (optional)
-digests		= md5, sha1		# Acceptable message digests (mandatory)
-accuracy	= secs:1, millisecs:500, microsecs:100	# (optional)
-clock_precision_digits  = 0	# number of digits after dot. (optional)
-ordering		= yes	# Is ordering defined for timestamps?
-				# (optional, default: no)
-tsa_name		= yes	# Must the TSA name be included in the reply?
-				# (optional, default: no)
-ess_cert_id_chain	= no	# Must the ESS cert id chain be included?
-				# (optional, default: no)

apps/openssl.c

@@ -56,7 +56,7 @@
  * [including the GNU Public Licence.]
  */
 /* ====================================================================
- * Copyright (c) 1998-2006 The OpenSSL Project.  All rights reserved.
+ * Copyright (c) 1998-2001 The OpenSSL Project.  All rights reserved.
  *
  * Redistribution and use in source and binary forms, with or without
  * modification, are permitted provided that the following conditions
@@ -129,23 +129,26 @@
 #include "progs.h"
 #include "s_apps.h"
 #include <openssl/err.h>
+#include <openssl/fips.h>
 
 /* The LHASH callbacks ("hash" & "cmp") have been replaced by functions with the
  * base prototypes (we cast each variable inside the function to the required
  * type of "FUNCTION*"). This removes the necessity for macro-generated wrapper
  * functions. */
 
-static LHASH_OF(FUNCTION) *prog_init(void );
-static int do_cmd(LHASH_OF(FUNCTION) *prog,int argc,char *argv[]);
-static void list_pkey(BIO *out);
-static void list_cipher(BIO *out);
-static void list_md(BIO *out);
+/* static unsigned long MS_CALLBACK hash(FUNCTION *a); */
+static unsigned long MS_CALLBACK hash(const void *a_void);
+/* static int MS_CALLBACK cmp(FUNCTION *a,FUNCTION *b); */
+static int MS_CALLBACK cmp(const void *a_void,const void *b_void);
+static LHASH *prog_init(void );
+static int do_cmd(LHASH *prog,int argc,char *argv[]);
 char *default_config_file=NULL;
 
 /* Make sure there is only one when MONOLITH is defined */
 #ifdef MONOLITH
 CONF *config=NULL;
 BIO *bio_err=NULL;
+int in_FIPS_mode=0;
 #endif
 
 
@@ -219,18 +222,29 @@ int main(int Argc, char *Argv[])
 #define PROG_NAME_SIZE	39
 	char pname[PROG_NAME_SIZE+1];
 	FUNCTION f,*fp;
-	MS_STATIC const char *prompt;
-	MS_STATIC char buf[1024];
+	MS_STATIC char *prompt,buf[1024];
 	char *to_free=NULL;
 	int n,i,ret=0;
 	int argc;
 	char **argv,*p;
-	LHASH_OF(FUNCTION) *prog=NULL;
+	LHASH *prog=NULL;
 	long errline;
 
 	arg.data=NULL;
 	arg.count=0;
 
+	in_FIPS_mode = 0;
+
+#ifdef OPENSSL_FIPS
+	if(getenv("OPENSSL_FIPS")) {
+		if (!FIPS_mode_set(1)) {
+			ERR_load_crypto_strings();
+			ERR_print_errors(BIO_new_fp(stderr,BIO_NOCLOSE));
+			EXIT(1);
+		}
+		in_FIPS_mode = 1;
+		}
+#endif
 	if (bio_err == NULL)
 		if ((bio_err=BIO_new(BIO_s_file())) != NULL)
 			BIO_set_fp(bio_err,stderr,BIO_NOCLOSE|BIO_FP_TEXT);
@@ -272,21 +286,9 @@ int main(int Argc, char *Argv[])
 	i=NCONF_load(config,p,&errline);
 	if (i == 0)
 		{
-		if (ERR_GET_REASON(ERR_peek_last_error())
-		    == CONF_R_NO_SUCH_FILE)
-			{
-			BIO_printf(bio_err,
-				   "WARNING: can't open config file: %s\n",p);
-			ERR_clear_error();
-			NCONF_free(config);
-			config = NULL;
-			}
-		else
-			{
-			ERR_print_errors(bio_err);
-			NCONF_free(config);
-			exit(1);
-			}
+		NCONF_free(config);
+		config = NULL;
+		ERR_clear_error();
 		}
 
 	prog=prog_init();
@@ -295,7 +297,7 @@ int main(int Argc, char *Argv[])
 	program_name(Argv[0],pname,sizeof pname);
 
 	f.name=pname;
-	fp=lh_FUNCTION_retrieve(prog,&f);
+	fp=(FUNCTION *)lh_retrieve(prog,&f);
 	if (fp != NULL)
 		{
 		Argv[0]=pname;
@@ -330,8 +332,7 @@ int main(int Argc, char *Argv[])
 			else	prompt="OpenSSL> ";
 			fputs(prompt,stdout);
 			fflush(stdout);
-			if (!fgets(p,n,stdin))
-				goto end;
+			fgets(p,n,stdin);
 			if (p[0] == '\0') goto end;
 			i=strlen(p);
 			if (i <= 1) break;
@@ -362,7 +363,7 @@ end:
 		NCONF_free(config);
 		config=NULL;
 		}
-	if (prog != NULL) lh_FUNCTION_free(prog);
+	if (prog != NULL) lh_free(prog);
 	if (arg.data != NULL) OPENSSL_free(arg.data);
 
 	apps_shutdown();
@@ -378,13 +379,9 @@ end:
 
 #define LIST_STANDARD_COMMANDS "list-standard-commands"
 #define LIST_MESSAGE_DIGEST_COMMANDS "list-message-digest-commands"
-#define LIST_MESSAGE_DIGEST_ALGORITHMS "list-message-digest-algorithms"
 #define LIST_CIPHER_COMMANDS "list-cipher-commands"
-#define LIST_CIPHER_ALGORITHMS "list-cipher-algorithms"
-#define LIST_PUBLIC_KEY_ALGORITHMS "list-public-key-algorithms"
 
-
-static int do_cmd(LHASH_OF(FUNCTION) *prog, int argc, char *argv[])
+static int do_cmd(LHASH *prog, int argc, char *argv[])
 	{
 	FUNCTION f,*fp;
 	int i,ret=1,tp,nl;
@@ -392,22 +389,7 @@ static int do_cmd(LHASH_OF(FUNCTION) *prog, int argc, char *argv[])
 	if ((argc <= 0) || (argv[0] == NULL))
 		{ ret=0; goto end; }
 	f.name=argv[0];
-	fp=lh_FUNCTION_retrieve(prog,&f);
-	if (fp == NULL)
-		{
-		if (EVP_get_digestbyname(argv[0]))
-			{
-			f.type = FUNC_TYPE_MD;
-			f.func = dgst_main;
-			fp = &f;
-			}
-		else if (EVP_get_cipherbyname(argv[0]))
-			{
-			f.type = FUNC_TYPE_CIPHER;
-			f.func = enc_main;
-			fp = &f;
-			}
-		}
+	fp=(FUNCTION *)lh_retrieve(prog,&f);
 	if (fp != NULL)
 		{
 		ret=fp->func(argc,argv);
@@ -422,7 +404,7 @@ static int do_cmd(LHASH_OF(FUNCTION) *prog, int argc, char *argv[])
 		}
 #endif
 		f.name=argv[0]+3;
-		ret = (lh_FUNCTION_retrieve(prog,&f) != NULL);
+		ret = (lh_retrieve(prog,&f) != NULL);
 		if (!ret)
 			BIO_printf(bio_stdout, "%s\n", argv[0]);
 		else
@@ -440,10 +422,7 @@ static int do_cmd(LHASH_OF(FUNCTION) *prog, int argc, char *argv[])
 		}
 	else if ((strcmp(argv[0],LIST_STANDARD_COMMANDS) == 0) ||
 		(strcmp(argv[0],LIST_MESSAGE_DIGEST_COMMANDS) == 0) ||
-		(strcmp(argv[0],LIST_MESSAGE_DIGEST_ALGORITHMS) == 0) ||
-		(strcmp(argv[0],LIST_CIPHER_COMMANDS) == 0) ||
-		(strcmp(argv[0],LIST_CIPHER_ALGORITHMS) == 0) ||
-		(strcmp(argv[0],LIST_PUBLIC_KEY_ALGORITHMS) == 0))
+		(strcmp(argv[0],LIST_CIPHER_COMMANDS) == 0))
 		{
 		int list_type;
 		BIO *bio_stdout;
@@ -452,12 +431,6 @@ static int do_cmd(LHASH_OF(FUNCTION) *prog, int argc, char *argv[])
 			list_type = FUNC_TYPE_GENERAL;
 		else if (strcmp(argv[0],LIST_MESSAGE_DIGEST_COMMANDS) == 0)
 			list_type = FUNC_TYPE_MD;
-		else if (strcmp(argv[0],LIST_MESSAGE_DIGEST_ALGORITHMS) == 0)
-			list_type = FUNC_TYPE_MD_ALG;
-		else if (strcmp(argv[0],LIST_PUBLIC_KEY_ALGORITHMS) == 0)
-			list_type = FUNC_TYPE_PKEY;
-		else if (strcmp(argv[0],LIST_CIPHER_ALGORITHMS) == 0)
-			list_type = FUNC_TYPE_CIPHER_ALG;
 		else /* strcmp(argv[0],LIST_CIPHER_COMMANDS) == 0 */
 			list_type = FUNC_TYPE_CIPHER;
 		bio_stdout = BIO_new_fp(stdout,BIO_NOCLOSE);
@@ -468,22 +441,9 @@ static int do_cmd(LHASH_OF(FUNCTION) *prog, int argc, char *argv[])
 		}
 #endif
 		
-		if (!load_config(bio_err, NULL))
-			goto end;
-
-		if (list_type == FUNC_TYPE_PKEY)
-			list_pkey(bio_stdout);	
-		if (list_type == FUNC_TYPE_MD_ALG)
-			list_md(bio_stdout);	
-		if (list_type == FUNC_TYPE_CIPHER_ALG)
-			list_cipher(bio_stdout);	
-		else
-			{
-			for (fp=functions; fp->name != NULL; fp++)
-				if (fp->type == list_type)
-					BIO_printf(bio_stdout, "%s\n",
-								fp->name);
-			}
+		for (fp=functions; fp->name != NULL; fp++)
+			if (fp->type == list_type)
+				BIO_printf(bio_stdout, "%s\n", fp->name);
 		BIO_free_all(bio_stdout);
 		ret=0;
 		goto end;
@@ -498,11 +458,7 @@ static int do_cmd(LHASH_OF(FUNCTION) *prog, int argc, char *argv[])
 		for (fp=functions; fp->name != NULL; fp++)
 			{
 			nl=0;
-#ifdef OPENSSL_NO_CAMELLIA
 			if (((i++) % 5) == 0)
-#else
-			if (((i++) % 4) == 0)
-#endif
 				{
 				BIO_printf(bio_err,"\n");
 				nl=1;
@@ -523,11 +479,7 @@ static int do_cmd(LHASH_OF(FUNCTION) *prog, int argc, char *argv[])
 					BIO_printf(bio_err,"\nCipher commands (see the `enc' command for more details)\n");
 					}
 				}
-#ifdef OPENSSL_NO_CAMELLIA
 			BIO_printf(bio_err,"%-15s",fp->name);
-#else
-			BIO_printf(bio_err,"%-18s",fp->name);
-#endif
 			}
 		BIO_printf(bio_err,"\n\n");
 		ret=0;
@@ -546,107 +498,34 @@ static int SortFnByName(const void *_f1,const void *_f2)
     return strcmp(f1->name,f2->name);
     }
 
-static void list_pkey(BIO *out)
+static LHASH *prog_init(void)
 	{
-	int i;
-	for (i = 0; i < EVP_PKEY_asn1_get_count(); i++)
-		{
-		const EVP_PKEY_ASN1_METHOD *ameth;
-		int pkey_id, pkey_base_id, pkey_flags;
-		const char *pinfo, *pem_str;
-		ameth = EVP_PKEY_asn1_get0(i);
-		EVP_PKEY_asn1_get0_info(&pkey_id, &pkey_base_id, &pkey_flags,
-						&pinfo, &pem_str, ameth);
-		if (pkey_flags & ASN1_PKEY_ALIAS)
-			{
-			BIO_printf(out, "Name: %s\n", 
-					OBJ_nid2ln(pkey_id));
-			BIO_printf(out, "\tType: Alias to %s\n",
-					OBJ_nid2ln(pkey_base_id));
-			}
-		else
-			{
-			BIO_printf(out, "Name: %s\n", pinfo);
-			BIO_printf(out, "\tType: %s Algorithm\n", 
-				pkey_flags & ASN1_PKEY_DYNAMIC ?
-					"External" : "Builtin");
-			BIO_printf(out, "\tOID: %s\n", OBJ_nid2ln(pkey_id));
-			if (pem_str == NULL)
-				pem_str = "(none)";
-			BIO_printf(out, "\tPEM string: %s\n", pem_str);
-			}
-					
-		}
-	}
-
-static void list_cipher_fn(const EVP_CIPHER *c,
-			const char *from, const char *to, void *arg)
-	{
-	if (c)
-		BIO_printf(arg, "%s\n", EVP_CIPHER_name(c));
-	else
-		{
-		if (!from)
-			from = "<undefined>";
-		if (!to)
-			to = "<undefined>";
-		BIO_printf(arg, "%s => %s\n", from, to);
-		}
-	}
-
-static void list_cipher(BIO *out)
-	{
-	EVP_CIPHER_do_all_sorted(list_cipher_fn, out);
-	}
-
-static void list_md_fn(const EVP_MD *m,
-			const char *from, const char *to, void *arg)
-	{
-	if (m)
-		BIO_printf(arg, "%s\n", EVP_MD_name(m));
-	else
-		{
-		if (!from)
-			from = "<undefined>";
-		if (!to)
-			to = "<undefined>";
-		BIO_printf(arg, "%s => %s\n", from, to);
-		}
-	}
-
-static void list_md(BIO *out)
-	{
-	EVP_MD_do_all_sorted(list_md_fn, out);
-	}
-
-static int MS_CALLBACK function_cmp(const FUNCTION *a, const FUNCTION *b)
-	{
-	return strncmp(a->name,b->name,8);
-	}
-static IMPLEMENT_LHASH_COMP_FN(function, FUNCTION)
-
-static unsigned long MS_CALLBACK function_hash(const FUNCTION *a)
-	{
-	return lh_strhash(a->name);
-	}	
-static IMPLEMENT_LHASH_HASH_FN(function, FUNCTION)
-
-static LHASH_OF(FUNCTION) *prog_init(void)
-	{
-	LHASH_OF(FUNCTION) *ret;
+	LHASH *ret;
 	FUNCTION *f;
-	size_t i;
+	int i;
 
 	/* Purely so it looks nice when the user hits ? */
 	for(i=0,f=functions ; f->name != NULL ; ++f,++i)
 	    ;
 	qsort(functions,i,sizeof *functions,SortFnByName);
 
-	if ((ret=lh_FUNCTION_new()) == NULL)
+	if ((ret=lh_new(hash, cmp)) == NULL)
 		return(NULL);
 
 	for (f=functions; f->name != NULL; f++)
-		(void)lh_FUNCTION_insert(ret,f);
+		lh_insert(ret,f);
 	return(ret);
 	}
 
+/* static int MS_CALLBACK cmp(FUNCTION *a, FUNCTION *b) */
+static int MS_CALLBACK cmp(const void *a_void, const void *b_void)
+	{
+	return(strncmp(((FUNCTION *)a_void)->name,
+			((FUNCTION *)b_void)->name,8));
+	}
+
+/* static unsigned long MS_CALLBACK hash(FUNCTION *a) */
+static unsigned long MS_CALLBACK hash(const void *a_void)
+	{
+	return(lh_strhash(((FUNCTION *)a_void)->name));
+	}

apps/openssl.cnf

@@ -21,17 +21,12 @@ oid_section		= new_oids
 
 [ new_oids ]
 
-# We can add new OIDs in here for use by 'ca', 'req' and 'ts'.
+# We can add new OIDs in here for use by 'ca' and 'req'.
 # Add a simple OID like this:
 # testoid1=1.2.3.4
 # Or use config file substitution like this:
 # testoid2=${testoid1}.5.6
 
-# Policies used by the TSA examples.
-tsa_policy1 = 1.2.3.4.1
-tsa_policy2 = 1.2.3.4.5.6
-tsa_policy3 = 1.2.3.4.5.7
-
 ####################################################################
 [ ca ]
 default_ca	= CA_default		# The default ca section
@@ -49,8 +44,8 @@ new_certs_dir	= $dir/newcerts		# default place for new certs.
 
 certificate	= $dir/cacert.pem 	# The CA certificate
 serial		= $dir/serial 		# The current serial number
-crlnumber	= $dir/crlnumber	# the current crl number
-					# must be commented out to leave a V1 CRL
+#crlnumber	= $dir/crlnumber	# the current crl number must be
+					# commented out to leave a V1 CRL
 crl		= $dir/crl.pem 		# The current CRL
 private_key	= $dir/private/cakey.pem# The private key
 RANDFILE	= $dir/private/.rand	# private random number file
@@ -72,7 +67,7 @@ cert_opt 	= ca_default		# Certificate field options
 
 default_days	= 365			# how long to certify for
 default_crl_days= 30			# how long before next CRL
-default_md	= default		# use public key default MD
+default_md	= md5			# which md to use.
 preserve	= no			# keep passed DN ordering
 
 # A few difference way of specifying how similar the request should look
@@ -115,12 +110,13 @@ x509_extensions	= v3_ca	# The extentions to add to the self signed cert
 
 # This sets a mask for permitted string types. There are several options. 
 # default: PrintableString, T61String, BMPString.
-# pkix	 : PrintableString, BMPString (PKIX recommendation before 2004)
-# utf8only: only UTF8Strings (PKIX recommendation after 2004).
+# pkix	 : PrintableString, BMPString.
+# utf8only: only UTF8Strings.
 # nombstr : PrintableString, T61String (no BMPStrings or UTF8Strings).
 # MASK:XXXX a literal mask value.
-# WARNING: ancient versions of Netscape crash on BMPStrings or UTF8Strings.
-string_mask = utf8only
+# WARNING: current versions of Netscape crash on BMPStrings or UTF8Strings
+# so use this option with caution!
+string_mask = nombstr
 
 # req_extensions = v3_req # The extensions to add to a certificate request
 
@@ -192,7 +188,7 @@ nsComment			= "OpenSSL Generated Certificate"
 
 # PKIX recommendations harmless if included in all certificates.
 subjectKeyIdentifier=hash
-authorityKeyIdentifier=keyid,issuer
+authorityKeyIdentifier=keyid,issuer:always
 
 # This stuff is for subjectAltName and issuerAltname.
 # Import the email address.
@@ -211,9 +207,6 @@ authorityKeyIdentifier=keyid,issuer
 #nsCaPolicyUrl
 #nsSslServerName
 
-# This is required for TSA certificates.
-# extendedKeyUsage = critical,timeStamping
-
 [ v3_req ]
 
 # Extensions to add to a certificate request
@@ -231,7 +224,7 @@ keyUsage = nonRepudiation, digitalSignature, keyEncipherment
 
 subjectKeyIdentifier=hash
 
-authorityKeyIdentifier=keyid:always,issuer
+authorityKeyIdentifier=keyid:always,issuer:always
 
 # This is what PKIX recommends but some broken software chokes on critical
 # extensions.
@@ -264,7 +257,7 @@ basicConstraints = CA:true
 # Only issuerAltName and authorityKeyIdentifier make any sense in a CRL.
 
 # issuerAltName=issuer:copy
-authorityKeyIdentifier=keyid:always
+authorityKeyIdentifier=keyid:always,issuer:always
 
 [ proxy_cert_ext ]
 # These extensions should be added when creating a proxy certificate
@@ -297,7 +290,7 @@ nsComment			= "OpenSSL Generated Certificate"
 
 # PKIX recommendations harmless if included in all certificates.
 subjectKeyIdentifier=hash
-authorityKeyIdentifier=keyid,issuer
+authorityKeyIdentifier=keyid,issuer:always
 
 # This stuff is for subjectAltName and issuerAltname.
 # Import the email address.
@@ -318,33 +311,3 @@ authorityKeyIdentifier=keyid,issuer
 
 # This really needs to be in place for it to be a proxy certificate.
 proxyCertInfo=critical,language:id-ppl-anyLanguage,pathlen:3,policy:foo
-
-####################################################################
-[ tsa ]
-
-default_tsa = tsa_config1	# the default TSA section
-
-[ tsa_config1 ]
-
-# These are used by the TSA reply generation only.
-dir		= ./demoCA		# TSA root directory
-serial		= $dir/tsaserial	# The current serial number (mandatory)
-crypto_device	= builtin		# OpenSSL engine to use for signing
-signer_cert	= $dir/tsacert.pem 	# The TSA signing certificate
-					# (optional)
-certs		= $dir/cacert.pem	# Certificate chain to include in reply
-					# (optional)
-signer_key	= $dir/private/tsakey.pem # The TSA private key (optional)
-
-default_policy	= tsa_policy1		# Policy if request did not specify it
-					# (optional)
-other_policies	= tsa_policy2, tsa_policy3	# acceptable policies (optional)
-digests		= md5, sha1		# Acceptable message digests (mandatory)
-accuracy	= secs:1, millisecs:500, microsecs:100	# (optional)
-clock_precision_digits  = 0	# number of digits after dot. (optional)
-ordering		= yes	# Is ordering defined for timestamps?
-				# (optional, default: no)
-tsa_name		= yes	# Must the TSA name be included in the reply?
-				# (optional, default: no)
-ess_cert_id_chain	= no	# Must the ESS cert id chain be included?
-				# (optional, default: no)

apps/passwd.c

@@ -312,8 +312,7 @@ static char *md5crypt(const char *passwd, const char *magic, const char *salt)
 	static char out_buf[6 + 9 + 24 + 2]; /* "$apr1$..salt..$.......md5hash..........\0" */
 	unsigned char buf[MD5_DIGEST_LENGTH];
 	char *salt_out;
-	int n;
-	unsigned int i;
+	int n, i;
 	EVP_MD_CTX md,md2;
 	size_t passwd_len, salt_len;
 
@@ -359,13 +358,13 @@ static char *md5crypt(const char *passwd, const char *magic, const char *salt)
 	for (i = 0; i < 1000; i++)
 		{
 		EVP_DigestInit_ex(&md2,EVP_md5(), NULL);
-		EVP_DigestUpdate(&md2, (i & 1) ? (unsigned const char *) passwd : buf,
+		EVP_DigestUpdate(&md2, (i & 1) ? (unsigned char *) passwd : buf,
 		                       (i & 1) ? passwd_len : sizeof buf);
 		if (i % 3)
 			EVP_DigestUpdate(&md2, salt_out, salt_len);
 		if (i % 7)
 			EVP_DigestUpdate(&md2, passwd, passwd_len);
-		EVP_DigestUpdate(&md2, (i & 1) ? buf : (unsigned const char *) passwd,
+		EVP_DigestUpdate(&md2, (i & 1) ? buf : (unsigned char *) passwd,
 		                       (i & 1) ? sizeof buf : passwd_len);
 		EVP_DigestFinal_ex(&md2, buf, NULL);
 		}
@@ -474,8 +473,7 @@ static int do_passwd(int passed_salt, char **salt_p, char **salt_malloc_p,
 	if ((strlen(passwd) > pw_maxlen))
 		{
 		if (!quiet)
-			/* XXX: really we should know how to print a size_t, not cast it */
-			BIO_printf(bio_err, "Warning: truncating password to %u characters\n", (unsigned)pw_maxlen);
+			BIO_printf(bio_err, "Warning: truncating password to %u characters\n", pw_maxlen);
 		passwd[pw_maxlen] = 0;
 		}
 	assert(strlen(passwd) <= pw_maxlen);

apps/pkcs12.c

@@ -1,9 +1,11 @@
 /* pkcs12.c */
-/* Written by Dr Stephen N Henson (steve@openssl.org) for the OpenSSL
- * project.
+#if !defined(OPENSSL_NO_DES) && !defined(OPENSSL_NO_SHA1)
+
+/* Written by Dr Stephen N Henson (shenson@bigfoot.com) for the OpenSSL
+ * project 1999.
  */
 /* ====================================================================
- * Copyright (c) 1999-2006 The OpenSSL Project.  All rights reserved.
+ * Copyright (c) 1999 The OpenSSL Project.  All rights reserved.
  *
  * Redistribution and use in source and binary forms, with or without
  * modification, are permitted provided that the following conditions
@@ -56,9 +58,6 @@
  *
  */
 
-#include <openssl/opensslconf.h>
-#if !defined(OPENSSL_NO_DES) && !defined(OPENSSL_NO_SHA1)
-
 #include <stdio.h>
 #include <stdlib.h>
 #include <string.h>
@@ -84,11 +83,10 @@ int dump_certs_keys_p12(BIO *out, PKCS12 *p12, char *pass, int passlen, int opti
 int dump_certs_pkeys_bags(BIO *out, STACK_OF(PKCS12_SAFEBAG) *bags, char *pass,
 			  int passlen, int options, char *pempass);
 int dump_certs_pkeys_bag(BIO *out, PKCS12_SAFEBAG *bags, char *pass, int passlen, int options, char *pempass);
-int print_attribs(BIO *out, STACK_OF(X509_ATTRIBUTE) *attrlst,const char *name);
+int print_attribs(BIO *out, STACK_OF(X509_ATTRIBUTE) *attrlst, char *name);
 void hex_prin(BIO *out, unsigned char *buf, int len);
 int alg_print(BIO *x, X509_ALGOR *alg);
 int cert_load(BIO *in, STACK_OF(X509) *sk);
-static int set_pbe(BIO *err, int *ppbe, const char *str);
 
 int MAIN(int, char **);
 
@@ -101,7 +99,6 @@ int MAIN(int argc, char **argv)
     char **args;
     char *name = NULL;
     char *csp_name = NULL;
-    int add_lmk = 0;
     PKCS12 *p12 = NULL;
     char pass[50], macpass[50];
     int export_cert = 0;
@@ -112,17 +109,16 @@ int MAIN(int argc, char **argv)
     int maciter = PKCS12_DEFAULT_ITER;
     int twopass = 0;
     int keytype = 0;
-    int cert_pbe = NID_pbe_WithSHA1And40BitRC2_CBC;
+    int cert_pbe;
     int key_pbe = NID_pbe_WithSHA1And3_Key_TripleDES_CBC;
     int ret = 1;
     int macver = 1;
     int noprompt = 0;
-    STACK_OF(OPENSSL_STRING) *canames = NULL;
+    STACK *canames = NULL;
     char *cpass = NULL, *mpass = NULL;
     char *passargin = NULL, *passargout = NULL, *passarg = NULL;
     char *passin = NULL, *passout = NULL;
     char *inrand = NULL;
-    char *macalg = NULL;
     char *CApath = NULL, *CAfile = NULL;
 #ifndef OPENSSL_NO_ENGINE
     char *engine=NULL;
@@ -130,6 +126,13 @@ int MAIN(int argc, char **argv)
 
     apps_startup();
 
+#ifdef OPENSSL_FIPS
+    if (FIPS_mode())
+	cert_pbe = NID_pbe_WithSHA1And3_Key_TripleDES_CBC;
+    else
+#endif
+    cert_pbe = NID_pbe_WithSHA1And40BitRC2_CBC;
+
     enc = EVP_des_ede3_cbc();
     if (bio_err == NULL ) bio_err = BIO_new_fp (stderr, BIO_NOCLOSE);
 
@@ -156,42 +159,41 @@ int MAIN(int argc, char **argv)
     			cert_pbe = NID_pbe_WithSHA1And3_Key_TripleDES_CBC;
 		else if (!strcmp (*args, "-export")) export_cert = 1;
 		else if (!strcmp (*args, "-des")) enc=EVP_des_cbc();
-		else if (!strcmp (*args, "-des3")) enc = EVP_des_ede3_cbc();
 #ifndef OPENSSL_NO_IDEA
 		else if (!strcmp (*args, "-idea")) enc=EVP_idea_cbc();
 #endif
-#ifndef OPENSSL_NO_SEED
-		else if (!strcmp(*args, "-seed")) enc=EVP_seed_cbc();
-#endif
+		else if (!strcmp (*args, "-des3")) enc = EVP_des_ede3_cbc();
 #ifndef OPENSSL_NO_AES
 		else if (!strcmp(*args,"-aes128")) enc=EVP_aes_128_cbc();
 		else if (!strcmp(*args,"-aes192")) enc=EVP_aes_192_cbc();
 		else if (!strcmp(*args,"-aes256")) enc=EVP_aes_256_cbc();
-#endif
-#ifndef OPENSSL_NO_CAMELLIA
-		else if (!strcmp(*args,"-camellia128")) enc=EVP_camellia_128_cbc();
-		else if (!strcmp(*args,"-camellia192")) enc=EVP_camellia_192_cbc();
-		else if (!strcmp(*args,"-camellia256")) enc=EVP_camellia_256_cbc();
 #endif
 		else if (!strcmp (*args, "-noiter")) iter = 1;
 		else if (!strcmp (*args, "-maciter"))
 					 maciter = PKCS12_DEFAULT_ITER;
 		else if (!strcmp (*args, "-nomaciter"))
 					 maciter = 1;
-		else if (!strcmp (*args, "-nomac"))
-					 maciter = -1;
-		else if (!strcmp (*args, "-macalg"))
-		    if (args[1]) {
-			args++;	
-			macalg = *args;
-		    } else badarg = 1;
 		else if (!strcmp (*args, "-nodes")) enc=NULL;
 		else if (!strcmp (*args, "-certpbe")) {
-			if (!set_pbe(bio_err, &cert_pbe, *++args))
-				badarg = 1;
+			if (args[1]) {
+				args++;
+				cert_pbe=OBJ_txt2nid(*args);
+				if(cert_pbe == NID_undef) {
+					BIO_printf(bio_err,
+						 "Unknown PBE algorithm %s\n", *args);
+					badarg = 1;
+				}
+			} else badarg = 1;
 		} else if (!strcmp (*args, "-keypbe")) {
-			if (!set_pbe(bio_err, &key_pbe, *++args))
-				badarg = 1;
+			if (args[1]) {
+				args++;
+				key_pbe=OBJ_txt2nid(*args);
+				if(key_pbe == NID_undef) {
+					BIO_printf(bio_err,
+						 "Unknown PBE algorithm %s\n", *args);
+					badarg = 1;
+				}
+			} else badarg = 1;
 		} else if (!strcmp (*args, "-rand")) {
 		    if (args[1]) {
 			args++;	
@@ -212,9 +214,7 @@ int MAIN(int argc, char **argv)
 			args++;	
 			name = *args;
 		    } else badarg = 1;
-		} else if (!strcmp (*args, "-LMK"))
-			add_lmk = 1;
-		else if (!strcmp (*args, "-CSP")) {
+		} else if (!strcmp (*args, "-CSP")) {
 		    if (args[1]) {
 			args++;	
 			csp_name = *args;
@@ -222,8 +222,8 @@ int MAIN(int argc, char **argv)
 		} else if (!strcmp (*args, "-caname")) {
 		    if (args[1]) {
 			args++;	
-			if (!canames) canames = sk_OPENSSL_STRING_new_null();
-			sk_OPENSSL_STRING_push(canames, *args);
+			if (!canames) canames = sk_new_null();
+			sk_push(canames, *args);
 		    } else badarg = 1;
 		} else if (!strcmp (*args, "-in")) {
 		    if (args[1]) {
@@ -299,27 +299,17 @@ int MAIN(int argc, char **argv)
 #ifndef OPENSSL_NO_IDEA
 	BIO_printf (bio_err, "-idea         encrypt private keys with idea\n");
 #endif
-#ifndef OPENSSL_NO_SEED
-	BIO_printf (bio_err, "-seed         encrypt private keys with seed\n");
-#endif
 #ifndef OPENSSL_NO_AES
 	BIO_printf (bio_err, "-aes128, -aes192, -aes256\n");
 	BIO_printf (bio_err, "              encrypt PEM output with cbc aes\n");
-#endif
-#ifndef OPENSSL_NO_CAMELLIA
-	BIO_printf (bio_err, "-camellia128, -camellia192, -camellia256\n");
-	BIO_printf (bio_err, "              encrypt PEM output with cbc camellia\n");
 #endif
 	BIO_printf (bio_err, "-nodes        don't encrypt private keys\n");
 	BIO_printf (bio_err, "-noiter       don't use encryption iteration\n");
-	BIO_printf (bio_err, "-nomaciter    don't use MAC iteration\n");
 	BIO_printf (bio_err, "-maciter      use MAC iteration\n");
-	BIO_printf (bio_err, "-nomac        don't generate MAC\n");
 	BIO_printf (bio_err, "-twopass      separate MAC, encryption passwords\n");
 	BIO_printf (bio_err, "-descert      encrypt PKCS#12 certificates with triple DES (default RC2-40)\n");
 	BIO_printf (bio_err, "-certpbe alg  specify certificate PBE algorithm (default RC2-40)\n");
 	BIO_printf (bio_err, "-keypbe alg   specify private key PBE algorithm (default 3DES)\n");
-	BIO_printf (bio_err, "-macalg alg   digest algorithm used in MAC (default SHA1)\n");
 	BIO_printf (bio_err, "-keyex        set MS key exchange type\n");
 	BIO_printf (bio_err, "-keysig       set MS key signature type\n");
 	BIO_printf (bio_err, "-password p   set import/export password source\n");
@@ -331,8 +321,6 @@ int MAIN(int argc, char **argv)
 	BIO_printf(bio_err,  "-rand file%cfile%c...\n", LIST_SEPARATOR_CHAR, LIST_SEPARATOR_CHAR);
 	BIO_printf(bio_err,  "              load the file (or the files in the directory) into\n");
 	BIO_printf(bio_err,  "              the random number generator\n");
-	BIO_printf(bio_err,  "-CSP name     Microsoft CSP name\n");
-	BIO_printf(bio_err,  "-LMK          Add local machine keyset attribute to private key\n");
     	goto end;
     }
 
@@ -384,6 +372,24 @@ int MAIN(int argc, char **argv)
 	    goto end;
    }
 
+#if 0
+   if (certfile) {
+    	if(!(certsin = BIO_new_file(certfile, "r"))) {
+	    BIO_printf(bio_err, "Can't open certificate file %s\n", certfile);
+	    perror (certfile);
+	    goto end;
+	}
+    }
+
+    if (keyname) {
+    	if(!(inkey = BIO_new_file(keyname, "r"))) {
+	    BIO_printf(bio_err, "Can't key certificate file %s\n", keyname);
+	    perror (keyname);
+	    goto end;
+	}
+     }
+#endif
+
 #ifdef CRYPTO_MDEBUG
     CRYPTO_pop_info();
     CRYPTO_push_info("write files");
@@ -420,32 +426,27 @@ int MAIN(int argc, char **argv)
 
     if (export_cert) {
 	EVP_PKEY *key = NULL;
-	X509 *ucert = NULL, *x = NULL;
+	STACK_OF(PKCS12_SAFEBAG) *bags = NULL;
+	STACK_OF(PKCS7) *safes = NULL;
+	PKCS12_SAFEBAG *bag = NULL;
+	PKCS8_PRIV_KEY_INFO *p8 = NULL;
+	PKCS7 *authsafe = NULL;
+	X509 *ucert = NULL;
 	STACK_OF(X509) *certs=NULL;
-	const EVP_MD *macmd = NULL;
-	unsigned char *catmp = NULL;
+	char *catmp = NULL;
 	int i;
-
-	if ((options & (NOCERTS|NOKEYS)) == (NOCERTS|NOKEYS))
-		{	
-		BIO_printf(bio_err, "Nothing to do!\n");
-		goto export_end;
-		}
-
-	if (options & NOCERTS)
-		chain = 0;
+	unsigned char keyid[EVP_MAX_MD_SIZE];
+	unsigned int keyidlen = 0;
 
 #ifdef CRYPTO_MDEBUG
 	CRYPTO_push_info("process -export_cert");
 	CRYPTO_push_info("reading private key");
 #endif
-	if (!(options & NOKEYS))
-		{
-		key = load_key(bio_err, keyname ? keyname : infile,
-				FORMAT_PEM, 1, passin, e, "private key");
-		if (!key)
-			goto export_end;
-		}
+	key = load_key(bio_err, keyname ? keyname : infile, FORMAT_PEM, 1,
+		passin, e, "private key");
+	if (!key) {
+		goto export_end;
+	}
 
 #ifdef CRYPTO_MDEBUG
 	CRYPTO_pop_info();
@@ -453,62 +454,50 @@ int MAIN(int argc, char **argv)
 #endif
 
 	/* Load in all certs in input file */
-	if(!(options & NOCERTS))
-		{
-		certs = load_certs(bio_err, infile, FORMAT_PEM, NULL, e,
-							"certificates");
-		if (!certs)
-			goto export_end;
-
-		if (key)
-			{
-			/* Look for matching private key */
-			for(i = 0; i < sk_X509_num(certs); i++)
-				{
-				x = sk_X509_value(certs, i);
-				if(X509_check_private_key(x, key))
-					{
-					ucert = x;
-					/* Zero keyid and alias */
-					X509_keyid_set1(ucert, NULL, 0);
-					X509_alias_set1(ucert, NULL, 0);
-					/* Remove from list */
-					(void)sk_X509_delete(certs, i);
-					break;
-					}
-				}
-			if (!ucert)
-				{
-				BIO_printf(bio_err, "No certificate matches private key\n");
-				goto export_end;
-				}
-			}
-
-		}
+	if(!(certs = load_certs(bio_err, infile, FORMAT_PEM, NULL, e,
+		"certificates"))) {
+		goto export_end;
+	}
 
 #ifdef CRYPTO_MDEBUG
 	CRYPTO_pop_info();
 	CRYPTO_push_info("reading certs from input 2");
 #endif
 
-	/* Add any more certificates asked for */
-	if(certfile)
-		{
-		STACK_OF(X509) *morecerts=NULL;
-		if(!(morecerts = load_certs(bio_err, certfile, FORMAT_PEM,
-					    NULL, e,
-					    "certificates from certfile")))
-			goto export_end;
-		while(sk_X509_num(morecerts) > 0)
-			sk_X509_push(certs, sk_X509_shift(morecerts));
-		sk_X509_free(morecerts);
- 		}
+	for(i = 0; i < sk_X509_num(certs); i++) {
+		ucert = sk_X509_value(certs, i);
+		if(X509_check_private_key(ucert, key)) {
+			X509_digest(ucert, EVP_sha1(), keyid, &keyidlen);
+			break;
+		}
+	}
+	if(!keyidlen) {
+		ucert = NULL;
+		BIO_printf(bio_err, "No certificate matches private key\n");
+		goto export_end;
+	}
 	
 #ifdef CRYPTO_MDEBUG
 	CRYPTO_pop_info();
 	CRYPTO_push_info("reading certs from certfile");
 #endif
 
+	bags = sk_PKCS12_SAFEBAG_new_null ();
+
+	/* Add any more certificates asked for */
+	if (certfile) {
+		STACK_OF(X509) *morecerts=NULL;
+		if(!(morecerts = load_certs(bio_err, certfile, FORMAT_PEM,
+					    NULL, e,
+					    "certificates from certfile"))) {
+			goto export_end;
+		}
+		while(sk_X509_num(morecerts) > 0) {
+			sk_X509_push(certs, sk_X509_shift(morecerts));
+		}
+		sk_X509_free(morecerts);
+ 	}
+
 #ifdef CRYPTO_MDEBUG
 	CRYPTO_pop_info();
 	CRYPTO_push_info("building chain");
@@ -538,76 +527,106 @@ int MAIN(int argc, char **argv)
 		    X509_free(sk_X509_value(chain2, 0));
 		    sk_X509_free(chain2);
 		} else {
-			if (vret >= 0)
-				BIO_printf (bio_err, "Error %s getting chain.\n",
+			BIO_printf (bio_err, "Error %s getting chain.\n",
 					X509_verify_cert_error_string(vret));
-			else
-				ERR_print_errors(bio_err);
 			goto export_end;
 		}			
     	}
 
-	/* Add any CA names */
+#ifdef CRYPTO_MDEBUG
+	CRYPTO_pop_info();
+	CRYPTO_push_info("building bags");
+#endif
 
-	for (i = 0; i < sk_OPENSSL_STRING_num(canames); i++)
-		{
-		catmp = (unsigned char *)sk_OPENSSL_STRING_value(canames, i);
-		X509_alias_set1(sk_X509_value(certs, i), catmp, -1);
-		}
-
-	if (csp_name && key)
-		EVP_PKEY_add1_attr_by_NID(key, NID_ms_csp_name,
-				MBSTRING_ASC, (unsigned char *)csp_name, -1);
-
-	if (add_lmk && key)
-		EVP_PKEY_add1_attr_by_NID(key, NID_LocalKeySet, 0, NULL, -1);
+	/* We now have loads of certificates: include them all */
+	for(i = 0; i < sk_X509_num(certs); i++) {
+		X509 *cert = NULL;
+		cert = sk_X509_value(certs, i);
+		bag = PKCS12_x5092certbag(cert);
+		/* If it matches private key set id */
+		if(cert == ucert) {
+			if(name) PKCS12_add_friendlyname(bag, name, -1);
+			PKCS12_add_localkeyid(bag, keyid, keyidlen);
+		} else if((catmp = sk_shift(canames))) 
+				PKCS12_add_friendlyname(bag, catmp, -1);
+		sk_PKCS12_SAFEBAG_push(bags, bag);
+	}
+	sk_X509_pop_free(certs, X509_free);
+	certs = NULL;
 
 #ifdef CRYPTO_MDEBUG
 	CRYPTO_pop_info();
-	CRYPTO_push_info("reading password");
+	CRYPTO_push_info("encrypting bags");
 #endif
 
 	if(!noprompt &&
-		EVP_read_pw_string(pass, sizeof pass, "Enter Export Password:", 1))
-		{
-	    	BIO_printf (bio_err, "Can't read Password\n");
-	    	goto export_end;
-        	}
+		EVP_read_pw_string(pass, sizeof pass, "Enter Export Password:", 1)) {
+	    BIO_printf (bio_err, "Can't read Password\n");
+	    goto export_end;
+        }
 	if (!twopass) BUF_strlcpy(macpass, pass, sizeof macpass);
+	/* Turn certbags into encrypted authsafe */
+	authsafe = PKCS12_pack_p7encdata(cert_pbe, cpass, -1, NULL, 0,
+								 iter, bags);
+	sk_PKCS12_SAFEBAG_pop_free(bags, PKCS12_SAFEBAG_free);
+	bags = NULL;
+
+	if (!authsafe) {
+		ERR_print_errors (bio_err);
+		goto export_end;
+	}
+
+	safes = sk_PKCS7_new_null ();
+	sk_PKCS7_push (safes, authsafe);
 
 #ifdef CRYPTO_MDEBUG
 	CRYPTO_pop_info();
-	CRYPTO_push_info("creating PKCS#12 structure");
+	CRYPTO_push_info("building shrouded key bag");
 #endif
 
-	p12 = PKCS12_create(cpass, name, key, ucert, certs,
-				key_pbe, cert_pbe, iter, -1, keytype);
+	/* Make a shrouded key bag */
+	p8 = EVP_PKEY2PKCS8 (key);
+	if(keytype) PKCS8_add_keyusage(p8, keytype);
+	bag = PKCS12_MAKE_SHKEYBAG(key_pbe, cpass, -1, NULL, 0, iter, p8);
+	PKCS8_PRIV_KEY_INFO_free(p8);
+	p8 = NULL;
+        if (name) PKCS12_add_friendlyname (bag, name, -1);
+	if(csp_name) PKCS12_add_CSPName_asc(bag, csp_name, -1);
+	PKCS12_add_localkeyid (bag, keyid, keyidlen);
+	bags = sk_PKCS12_SAFEBAG_new_null();
+	sk_PKCS12_SAFEBAG_push (bags, bag);
 
-	if (!p12)
-		{
-	    	ERR_print_errors (bio_err);
-		goto export_end;
-		}
+#ifdef CRYPTO_MDEBUG
+	CRYPTO_pop_info();
+	CRYPTO_push_info("encrypting shrouded key bag");
+#endif
 
-	if (macalg)
-		{
-		macmd = EVP_get_digestbyname(macalg);
-		if (!macmd)
-			{
-			BIO_printf(bio_err, "Unknown digest algorithm %s\n", 
-						macalg);
-			}
-		}
+	/* Turn it into unencrypted safe bag */
+	authsafe = PKCS12_pack_p7data (bags);
+	sk_PKCS12_SAFEBAG_pop_free(bags, PKCS12_SAFEBAG_free);
+	bags = NULL;
+	sk_PKCS7_push (safes, authsafe);
 
-	if (maciter != -1)
-		PKCS12_set_mac(p12, mpass, -1, NULL, 0, maciter, macmd);
+#ifdef CRYPTO_MDEBUG
+	CRYPTO_pop_info();
+	CRYPTO_push_info("building pkcs12");
+#endif
+
+	p12 = PKCS12_init(NID_pkcs7_data);
+
+	PKCS12_pack_authsafes(p12, safes);
+
+	sk_PKCS7_pop_free(safes, PKCS7_free);
+	safes = NULL;
+
+	PKCS12_set_mac (p12, mpass, -1, NULL, 0, maciter, NULL);
 
 #ifdef CRYPTO_MDEBUG
 	CRYPTO_pop_info();
 	CRYPTO_push_info("writing pkcs12");
 #endif
 
-	i2d_PKCS12_bio(out, p12);
+	i2d_PKCS12_bio (out, p12);
 
 	ret = 0;
 
@@ -620,7 +639,8 @@ int MAIN(int argc, char **argv)
 
 	if (key) EVP_PKEY_free(key);
 	if (certs) sk_X509_pop_free(certs, X509_free);
-	if (ucert) X509_free(ucert);
+	if (safes) sk_PKCS7_pop_free(safes, PKCS7_free);
+	if (bags) sk_PKCS12_SAFEBAG_pop_free(bags, PKCS12_SAFEBAG_free);
 
 #ifdef CRYPTO_MDEBUG
 	CRYPTO_pop_info();
@@ -687,7 +707,7 @@ int MAIN(int argc, char **argv)
 #endif
     BIO_free(in);
     BIO_free_all(out);
-    if (canames) sk_OPENSSL_STRING_free(canames);
+    if (canames) sk_free(canames);
     if(passin) OPENSSL_free(passin);
     if(passout) OPENSSL_free(passout);
     apps_shutdown();
@@ -828,7 +848,7 @@ int get_cert_chain (X509 *cert, X509_STORE *store, STACK_OF(X509) **chain)
 {
 	X509_STORE_CTX store_ctx;
 	STACK_OF(X509) *chn;
-	int i = 0;
+	int i;
 
 	/* FIXME: Should really check the return status of X509_STORE_CTX_init
 	 * for an error, but how that fits into the return value of this
@@ -836,17 +856,13 @@ int get_cert_chain (X509 *cert, X509_STORE *store, STACK_OF(X509) **chain)
 	X509_STORE_CTX_init(&store_ctx, store, cert, NULL);
 	if (X509_verify_cert(&store_ctx) <= 0) {
 		i = X509_STORE_CTX_get_error (&store_ctx);
-		if (i == 0)
-			/* avoid returning 0 if X509_verify_cert() did not
-			 * set an appropriate error value in the context */
-			i = -1;
-		chn = NULL;
 		goto err;
-	} else
-		chn = X509_STORE_CTX_get1_chain(&store_ctx);
+	}
+	chn =  X509_STORE_CTX_get1_chain(&store_ctx);
+	i = 0;
+	*chain = chn;
 err:
 	X509_STORE_CTX_cleanup(&store_ctx);
-	*chain = chn;
 	
 	return i;
 }	
@@ -854,14 +870,13 @@ err:
 int alg_print (BIO *x, X509_ALGOR *alg)
 {
 	PBEPARAM *pbe;
-	const unsigned char *p;
+	unsigned char *p;
 	p = alg->parameter->value.sequence->data;
-	pbe = d2i_PBEPARAM(NULL, &p, alg->parameter->value.sequence->length);
+	pbe = d2i_PBEPARAM (NULL, &p, alg->parameter->value.sequence->length);
 	if (!pbe)
 		return 1;
-	BIO_printf (bio_err, "%s, Iteration %ld\n", 
-		OBJ_nid2ln(OBJ_obj2nid(alg->algorithm)),
-		ASN1_INTEGER_get(pbe->iter));
+	BIO_printf (bio_err, "%s, Iteration %d\n", 
+	OBJ_nid2ln(OBJ_obj2nid(alg->algorithm)), ASN1_INTEGER_get(pbe->iter));
 	PBEPARAM_free (pbe);
 	return 1;
 }
@@ -895,7 +910,7 @@ int cert_load(BIO *in, STACK_OF(X509) *sk)
 
 /* Generalised attribute print: handle PKCS#8 and bag attributes */
 
-int print_attribs (BIO *out, STACK_OF(X509_ATTRIBUTE) *attrlst,const char *name)
+int print_attribs (BIO *out, STACK_OF(X509_ATTRIBUTE) *attrlst, char *name)
 {
 	X509_ATTRIBUTE *attr;
 	ASN1_TYPE *av;
@@ -923,7 +938,7 @@ int print_attribs (BIO *out, STACK_OF(X509_ATTRIBUTE) *attrlst,const char *name)
 			av = sk_ASN1_TYPE_value(attr->value.set, 0);
 			switch(av->type) {
 				case V_ASN1_BMPSTRING:
-        			value = OPENSSL_uni2asc(av->value.bmpstring->data,
+        			value = uni2asc(av->value.bmpstring->data,
                                 	       av->value.bmpstring->length);
 				BIO_printf(out, "%s\n", value);
 				OPENSSL_free(value);
@@ -956,22 +971,4 @@ void hex_prin(BIO *out, unsigned char *buf, int len)
 	for (i = 0; i < len; i++) BIO_printf (out, "%02X ", buf[i]);
 }
 
-static int set_pbe(BIO *err, int *ppbe, const char *str)
-	{
-	if (!str)
-		return 0;
-	if (!strcmp(str, "NONE"))
-		{
-		*ppbe = -1;
-		return 1;
-		}
-	*ppbe=OBJ_txt2nid(str);
-	if (*ppbe == NID_undef)
-		{
-		BIO_printf(bio_err, "Unknown PBE algorithm %s\n", str);
-		return 0;
-		}
-	return 1;
-	}
-			
 #endif

apps/pkcs7.c

@@ -82,12 +82,15 @@ int MAIN(int, char **);
 
 int MAIN(int argc, char **argv)
 	{
+#ifndef OPENSSL_NO_ENGINE
+	ENGINE *e = NULL;
+#endif
 	PKCS7 *p7=NULL;
 	int i,badops=0;
 	BIO *in=NULL,*out=NULL;
 	int informat,outformat;
 	char *infile,*outfile,*prog;
-	int print_certs=0,text=0,noout=0,p7_print=0;
+	int print_certs=0,text=0,noout=0;
 	int ret=1;
 #ifndef OPENSSL_NO_ENGINE
 	char *engine=NULL;
@@ -136,8 +139,6 @@ int MAIN(int argc, char **argv)
 			noout=1;
 		else if (strcmp(*argv,"-text") == 0)
 			text=1;
-		else if (strcmp(*argv,"-print") == 0)
-			p7_print=1;
 		else if (strcmp(*argv,"-print_certs") == 0)
 			print_certs=1;
 #ifndef OPENSSL_NO_ENGINE
@@ -179,7 +180,7 @@ bad:
 	ERR_load_crypto_strings();
 
 #ifndef OPENSSL_NO_ENGINE
-        setup_engine(bio_err, engine, 0);
+        e = setup_engine(bio_err, engine, 0);
 #endif
 
 	in=BIO_new(BIO_s_file());
@@ -237,9 +238,6 @@ bad:
 			}
 		}
 
-	if (p7_print)
-		PKCS7_print_ctx(out, p7, 0, NULL);
-
 	if (print_certs)
 		{
 		STACK_OF(X509) *certs=NULL;

apps/pkcs8.c

@@ -1,5 +1,5 @@
 /* pkcs8.c */
-/* Written by Dr Stephen N Henson (steve@openssl.org) for the OpenSSL
+/* Written by Dr Stephen N Henson (shenson@bigfoot.com) for the OpenSSL
  * project 1999-2004.
  */
 /* ====================================================================
@@ -80,12 +80,11 @@ int MAIN(int argc, char **argv)
 	int informat, outformat;
 	int p8_broken = PKCS8_OK;
 	int nocrypt = 0;
-	X509_SIG *p8 = NULL;
-	PKCS8_PRIV_KEY_INFO *p8inf = NULL;
+	X509_SIG *p8;
+	PKCS8_PRIV_KEY_INFO *p8inf;
 	EVP_PKEY *pkey=NULL;
 	char pass[50], *passin = NULL, *passout = NULL, *p8pass = NULL;
 	int badarg = 0;
-	int ret = 1;
 #ifndef OPENSSL_NO_ENGINE
 	char *engine=NULL;
 #endif
@@ -226,7 +225,7 @@ int MAIN(int argc, char **argv)
 #ifndef OPENSSL_NO_ENGINE
 		BIO_printf(bio_err," -engine e       use engine e, possibly a hardware device.\n");
 #endif
-		goto end;
+		return 1;
 		}
 
 #ifndef OPENSSL_NO_ENGINE
@@ -236,7 +235,7 @@ int MAIN(int argc, char **argv)
 	if (!app_passwd(bio_err, passargin, passargout, &passin, &passout))
 		{
 		BIO_printf(bio_err, "Error getting passwords\n");
-		goto end;
+		return 1;
 		}
 
 	if ((pbe_nid == -1) && !cipher)
@@ -248,7 +247,7 @@ int MAIN(int argc, char **argv)
 			{
 			BIO_printf(bio_err,
 				 "Can't open input file %s\n", infile);
-			goto end;
+			return (1);
 			}
 		}
 	else
@@ -260,7 +259,7 @@ int MAIN(int argc, char **argv)
 			{
 			BIO_printf(bio_err,
 				 "Can't open output file %s\n", outfile);
-			goto end;
+			return (1);
 			}
 		}
 	else
@@ -275,15 +274,21 @@ int MAIN(int argc, char **argv)
 		}
 	if (topk8)
 		{
+		BIO_free(in); /* Not needed in this section */
 		pkey = load_key(bio_err, infile, informat, 1,
 			passin, e, "key");
 		if (!pkey)
-			goto end;
+			{
+			BIO_free_all(out);
+			return 1;
+			}
 		if (!(p8inf = EVP_PKEY2PKCS8_broken(pkey, p8_broken)))
 			{
 			BIO_printf(bio_err, "Error converting key\n");
 			ERR_print_errors(bio_err);
-			goto end;
+			EVP_PKEY_free(pkey);
+			BIO_free_all(out);
+			return 1;
 			}
 		if (nocrypt)
 			{
@@ -294,7 +299,10 @@ int MAIN(int argc, char **argv)
 			else
 				{
 				BIO_printf(bio_err, "Bad format specified for key\n");
-				goto end;
+				PKCS8_PRIV_KEY_INFO_free(p8inf);
+				EVP_PKEY_free(pkey);
+				BIO_free_all(out);
+				return (1);
 				}
 			}
 		else
@@ -305,7 +313,12 @@ int MAIN(int argc, char **argv)
 				{
 				p8pass = pass;
 				if (EVP_read_pw_string(pass, sizeof pass, "Enter Encryption Password:", 1))
-					goto end;
+					{
+					PKCS8_PRIV_KEY_INFO_free(p8inf);
+					EVP_PKEY_free(pkey);
+					BIO_free_all(out);
+					return (1);
+					}
 				}
 			app_RAND_load_file(NULL, bio_err, 0);
 			if (!(p8 = PKCS8_encrypt(pbe_nid, cipher,
@@ -314,7 +327,10 @@ int MAIN(int argc, char **argv)
 				{
 				BIO_printf(bio_err, "Error encrypting key\n");
 				ERR_print_errors(bio_err);
-				goto end;
+				PKCS8_PRIV_KEY_INFO_free(p8inf);
+				EVP_PKEY_free(pkey);
+				BIO_free_all(out);
+				return (1);
 				}
 			app_RAND_write_file(NULL, bio_err);
 			if (outformat == FORMAT_PEM) 
@@ -324,12 +340,22 @@ int MAIN(int argc, char **argv)
 			else
 				{
 				BIO_printf(bio_err, "Bad format specified for key\n");
-				goto end;
+				PKCS8_PRIV_KEY_INFO_free(p8inf);
+				EVP_PKEY_free(pkey);
+				BIO_free_all(out);
+				return (1);
 				}
+			X509_SIG_free(p8);
 			}
 
-		ret = 0;
-		goto end;
+		PKCS8_PRIV_KEY_INFO_free (p8inf);
+		EVP_PKEY_free(pkey);
+		BIO_free_all(out);
+		if (passin)
+			OPENSSL_free(passin);
+		if (passout)
+			OPENSSL_free(passout);
+		return (0);
 		}
 
 	if (nocrypt)
@@ -341,7 +367,7 @@ int MAIN(int argc, char **argv)
 		else
 			{
 			BIO_printf(bio_err, "Bad format specified for key\n");
-			goto end;
+			return (1);
 			}
 		}
 	else
@@ -353,14 +379,14 @@ int MAIN(int argc, char **argv)
 		else
 			{
 			BIO_printf(bio_err, "Bad format specified for key\n");
-			goto end;
+			return (1);
 			}
 
 		if (!p8)
 			{
 			BIO_printf (bio_err, "Error reading key\n");
 			ERR_print_errors(bio_err);
-			goto end;
+			return (1);
 			}
 		if (passin)
 			p8pass = passin;
@@ -370,20 +396,21 @@ int MAIN(int argc, char **argv)
 			EVP_read_pw_string(pass, sizeof pass, "Enter Password:", 0);
 			}
 		p8inf = PKCS8_decrypt(p8, p8pass, strlen(p8pass));
+		X509_SIG_free(p8);
 		}
 
 	if (!p8inf)
 		{
 		BIO_printf(bio_err, "Error decrypting key\n");
 		ERR_print_errors(bio_err);
-		goto end;
+		return (1);
 		}
 
 	if (!(pkey = EVP_PKCS82PKEY(p8inf)))
 		{
 		BIO_printf(bio_err, "Error converting key\n");
 		ERR_print_errors(bio_err);
-		goto end;
+		return (1);
 		}
 	
 	if (p8inf->broken)
@@ -403,16 +430,13 @@ int MAIN(int argc, char **argv)
 			BIO_printf(bio_err, "DSA public key include in PrivateKey\n");
 			break;
 
-			case PKCS8_NEG_PRIVKEY:
-			BIO_printf(bio_err, "DSA private key value is negative\n");
-			break;
-
 			default:
 			BIO_printf(bio_err, "Unknown broken type\n");
 			break;
 		}
 	}
 	
+	PKCS8_PRIV_KEY_INFO_free(p8inf);
 	if (outformat == FORMAT_PEM) 
 		PEM_write_bio_PrivateKey(out, pkey, NULL, NULL, 0, NULL, passout);
 	else if (outformat == FORMAT_ASN1)
@@ -420,13 +444,10 @@ int MAIN(int argc, char **argv)
 	else
 		{
 		BIO_printf(bio_err, "Bad format specified for key\n");
-			goto end;
+			return (1);
 		}
-	ret = 0;
 
 	end:
-	X509_SIG_free(p8);
-	PKCS8_PRIV_KEY_INFO_free(p8inf);
 	EVP_PKEY_free(pkey);
 	BIO_free_all(out);
 	BIO_free(in);
@@ -435,5 +456,5 @@ int MAIN(int argc, char **argv)
 	if (passout)
 		OPENSSL_free(passout);
 
-	return ret;
+	return (0);
 	}

apps/pkey.c

@@ -1,284 +0,0 @@
-/* apps/pkey.c */
-/* Written by Dr Stephen N Henson (steve@openssl.org) for the OpenSSL
- * project 2006
- */
-/* ====================================================================
- * Copyright (c) 2006 The OpenSSL Project.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer. 
- *
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- *
- * 3. All advertising materials mentioning features or use of this
- *    software must display the following acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit. (http://www.OpenSSL.org/)"
- *
- * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
- *    endorse or promote products derived from this software without
- *    prior written permission. For written permission, please contact
- *    licensing@OpenSSL.org.
- *
- * 5. Products derived from this software may not be called "OpenSSL"
- *    nor may "OpenSSL" appear in their names without prior written
- *    permission of the OpenSSL Project.
- *
- * 6. Redistributions of any form whatsoever must retain the following
- *    acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit (http://www.OpenSSL.org/)"
- *
- * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
- * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE OpenSSL PROJECT OR
- * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
- * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
- * OF THE POSSIBILITY OF SUCH DAMAGE.
- * ====================================================================
- *
- * This product includes cryptographic software written by Eric Young
- * (eay@cryptsoft.com).  This product includes software written by Tim
- * Hudson (tjh@cryptsoft.com).
- *
- */
-#include <stdio.h>
-#include <string.h>
-#include "apps.h"
-#include <openssl/pem.h>
-#include <openssl/err.h>
-#include <openssl/evp.h>
-
-#define PROG pkey_main
-
-int MAIN(int, char **);
-
-int MAIN(int argc, char **argv)
-	{
-	ENGINE *e = NULL;
-	char **args, *infile = NULL, *outfile = NULL;
-	char *passargin = NULL, *passargout = NULL;
-	BIO *in = NULL, *out = NULL;
-	const EVP_CIPHER *cipher = NULL;
-	int informat, outformat;
-	int pubin = 0, pubout = 0, pubtext = 0, text = 0, noout = 0;
-	EVP_PKEY *pkey=NULL;
-	char *passin = NULL, *passout = NULL;
-	int badarg = 0;
-#ifndef OPENSSL_NO_ENGINE
-	char *engine=NULL;
-#endif
-	int ret = 1;
-
-	if (bio_err == NULL)
-		bio_err = BIO_new_fp (stderr, BIO_NOCLOSE);
-
-	if (!load_config(bio_err, NULL))
-		goto end;
-
-	informat=FORMAT_PEM;
-	outformat=FORMAT_PEM;
-
-	ERR_load_crypto_strings();
-	OpenSSL_add_all_algorithms();
-	args = argv + 1;
-	while (!badarg && *args && *args[0] == '-')
-		{
-		if (!strcmp(*args,"-inform"))
-			{
-			if (args[1])
-				{
-				args++;
-				informat=str2fmt(*args);
-				}
-			else badarg = 1;
-			}
-		else if (!strcmp(*args,"-outform"))
-			{
-			if (args[1])
-				{
-				args++;
-				outformat=str2fmt(*args);
-				}
-			else badarg = 1;
-			}
-		else if (!strcmp(*args,"-passin"))
-			{
-			if (!args[1]) goto bad;
-			passargin= *(++args);
-			}
-		else if (!strcmp(*args,"-passout"))
-			{
-			if (!args[1]) goto bad;
-			passargout= *(++args);
-			}
-#ifndef OPENSSL_NO_ENGINE
-		else if (strcmp(*args,"-engine") == 0)
-			{
-			if (!args[1]) goto bad;
-			engine= *(++args);
-			}
-#endif
-		else if (!strcmp (*args, "-in"))
-			{
-			if (args[1])
-				{
-				args++;
-				infile = *args;
-				}
-			else badarg = 1;
-			}
-		else if (!strcmp (*args, "-out"))
-			{
-			if (args[1])
-				{
-				args++;
-				outfile = *args;
-				}
-			else badarg = 1;
-			}
-		else if (strcmp(*args,"-pubin") == 0)
-			{
-			pubin=1;
-			pubout=1;
-			pubtext=1;
-			}
-		else if (strcmp(*args,"-pubout") == 0)
-			pubout=1;
-		else if (strcmp(*args,"-text_pub") == 0)
-			{
-			pubtext=1;
-			text=1;
-			}
-		else if (strcmp(*args,"-text") == 0)
-			text=1;
-		else if (strcmp(*args,"-noout") == 0)
-			noout=1;
-		else
-			{
-			cipher = EVP_get_cipherbyname(*args + 1);
-			if (!cipher)
-				{
-				BIO_printf(bio_err, "Unknown cipher %s\n",
-								*args + 1);
-				badarg = 1;
-				}
-			}
-		args++;
-		}
-
-	if (badarg)
-		{
-		bad:
-		BIO_printf(bio_err, "Usage pkey [options]\n");
-		BIO_printf(bio_err, "where options are\n");
-		BIO_printf(bio_err, "-in file        input file\n");
-		BIO_printf(bio_err, "-inform X       input format (DER or PEM)\n");
-		BIO_printf(bio_err, "-passin arg     input file pass phrase source\n");
-		BIO_printf(bio_err, "-outform X      output format (DER or PEM)\n");
-		BIO_printf(bio_err, "-out file       output file\n");
-		BIO_printf(bio_err, "-passout arg    output file pass phrase source\n");
-#ifndef OPENSSL_NO_ENGINE
-		BIO_printf(bio_err, "-engine e       use engine e, possibly a hardware device.\n");
-#endif
-		return 1;
-		}
-
-#ifndef OPENSSL_NO_ENGINE
-        e = setup_engine(bio_err, engine, 0);
-#endif
-
-	if (!app_passwd(bio_err, passargin, passargout, &passin, &passout))
-		{
-		BIO_printf(bio_err, "Error getting passwords\n");
-		goto end;
-		}
-
-	if (outfile)
-		{
-		if (!(out = BIO_new_file (outfile, "wb")))
-			{
-			BIO_printf(bio_err,
-				 "Can't open output file %s\n", outfile);
-			goto end;
-			}
-		}
-	else
-		{
-		out = BIO_new_fp (stdout, BIO_NOCLOSE);
-#ifdef OPENSSL_SYS_VMS
-			{
-			BIO *tmpbio = BIO_new(BIO_f_linebuffer());
-			out = BIO_push(tmpbio, out);
-			}
-#endif
-		}
-
-	if (pubin)
-		pkey = load_pubkey(bio_err, infile, informat, 1,
-			passin, e, "Public Key");
-	else
-		pkey = load_key(bio_err, infile, informat, 1,
-			passin, e, "key");
-	if (!pkey)
-		goto end;
-
-	if (!noout)
-		{
-		if (outformat == FORMAT_PEM) 
-			{
-			if (pubout)
-				PEM_write_bio_PUBKEY(out,pkey);
-			else
-				PEM_write_bio_PrivateKey(out, pkey, cipher,
-							NULL, 0, NULL, passout);
-			}
-		else if (outformat == FORMAT_ASN1)
-			{
-			if (pubout)
-				i2d_PUBKEY_bio(out, pkey);
-			else
-				i2d_PrivateKey_bio(out, pkey);
-			}
-		else
-			{
-			BIO_printf(bio_err, "Bad format specified for key\n");
-			goto end;
-			}
-
-		}
-
-	if (text)
-		{
-		if (pubtext)
-			EVP_PKEY_print_public(out, pkey, 0, NULL);
-		else
-			EVP_PKEY_print_private(out, pkey, 0, NULL);
-		}
-
-	ret = 0;
-
-	end:
-	EVP_PKEY_free(pkey);
-	BIO_free_all(out);
-	BIO_free(in);
-	if (passin)
-		OPENSSL_free(passin);
-	if (passout)
-		OPENSSL_free(passout);
-
-	return ret;
-	}

apps/pkeyparam.c

@@ -1,200 +0,0 @@
-/* apps/pkeyparam.c */
-/* Written by Dr Stephen N Henson (steve@openssl.org) for the OpenSSL
- * project 2006
- */
-/* ====================================================================
- * Copyright (c) 2006 The OpenSSL Project.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer. 
- *
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- *
- * 3. All advertising materials mentioning features or use of this
- *    software must display the following acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit. (http://www.OpenSSL.org/)"
- *
- * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
- *    endorse or promote products derived from this software without
- *    prior written permission. For written permission, please contact
- *    licensing@OpenSSL.org.
- *
- * 5. Products derived from this software may not be called "OpenSSL"
- *    nor may "OpenSSL" appear in their names without prior written
- *    permission of the OpenSSL Project.
- *
- * 6. Redistributions of any form whatsoever must retain the following
- *    acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit (http://www.OpenSSL.org/)"
- *
- * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
- * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE OpenSSL PROJECT OR
- * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
- * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
- * OF THE POSSIBILITY OF SUCH DAMAGE.
- * ====================================================================
- *
- * This product includes cryptographic software written by Eric Young
- * (eay@cryptsoft.com).  This product includes software written by Tim
- * Hudson (tjh@cryptsoft.com).
- *
- */
-#include <stdio.h>
-#include <string.h>
-#include "apps.h"
-#include <openssl/pem.h>
-#include <openssl/err.h>
-#include <openssl/evp.h>
-
-#define PROG pkeyparam_main
-
-int MAIN(int, char **);
-
-int MAIN(int argc, char **argv)
-	{
-	char **args, *infile = NULL, *outfile = NULL;
-	BIO *in = NULL, *out = NULL;
-	int text = 0, noout = 0;
-	EVP_PKEY *pkey=NULL;
-	int badarg = 0;
-#ifndef OPENSSL_NO_ENGINE
-	char *engine=NULL;
-#endif
-	int ret = 1;
-
-	if (bio_err == NULL)
-		bio_err = BIO_new_fp (stderr, BIO_NOCLOSE);
-
-	if (!load_config(bio_err, NULL))
-		goto end;
-
-	ERR_load_crypto_strings();
-	OpenSSL_add_all_algorithms();
-	args = argv + 1;
-	while (!badarg && *args && *args[0] == '-')
-		{
-		if (!strcmp (*args, "-in"))
-			{
-			if (args[1])
-				{
-				args++;
-				infile = *args;
-				}
-			else badarg = 1;
-			}
-		else if (!strcmp (*args, "-out"))
-			{
-			if (args[1])
-				{
-				args++;
-				outfile = *args;
-				}
-			else badarg = 1;
-			}
-#ifndef OPENSSL_NO_ENGINE
-		else if (strcmp(*args,"-engine") == 0)
-			{
-			if (!args[1]) goto bad;
-			engine= *(++args);
-			}
-#endif
-
-		else if (strcmp(*args,"-text") == 0)
-			text=1;
-		else if (strcmp(*args,"-noout") == 0)
-			noout=1;
-		args++;
-		}
-
-	if (badarg)
-		{
-#ifndef OPENSSL_NO_ENGINE
-		bad:
-#endif
-		BIO_printf(bio_err, "Usage pkeyparam [options]\n");
-		BIO_printf(bio_err, "where options are\n");
-		BIO_printf(bio_err, "-in file        input file\n");
-		BIO_printf(bio_err, "-out file       output file\n");
-		BIO_printf(bio_err, "-text           print parameters as text\n");
-		BIO_printf(bio_err, "-noout          don't output encoded parameters\n");
-#ifndef OPENSSL_NO_ENGINE
-		BIO_printf(bio_err, "-engine e       use engine e, possibly a hardware device.\n");
-#endif
-		return 1;
-		}
-
-#ifndef OPENSSL_NO_ENGINE
-        setup_engine(bio_err, engine, 0);
-#endif
-
-	if (infile)
-		{
-		if (!(in = BIO_new_file (infile, "r")))
-			{
-			BIO_printf(bio_err,
-				 "Can't open input file %s\n", infile);
-			goto end;
-			}
-		}
-	else
-		in = BIO_new_fp (stdin, BIO_NOCLOSE);
-
-	if (outfile)
-		{
-		if (!(out = BIO_new_file (outfile, "w")))
-			{
-			BIO_printf(bio_err,
-				 "Can't open output file %s\n", outfile);
-			goto end;
-			}
-		}
-	else
-		{
-		out = BIO_new_fp (stdout, BIO_NOCLOSE);
-#ifdef OPENSSL_SYS_VMS
-			{
-			BIO *tmpbio = BIO_new(BIO_f_linebuffer());
-			out = BIO_push(tmpbio, out);
-			}
-#endif
-		}
-
-	pkey = PEM_read_bio_Parameters(in, NULL);
-	if (!pkey)
-		{
-		BIO_printf(bio_err, "Error reading parameters\n");
-		ERR_print_errors(bio_err);
-		goto end;
-		}
-
-	if (!noout)
-		PEM_write_bio_Parameters(out,pkey);
-
-	if (text)
-		EVP_PKEY_print_params(out, pkey, 0, NULL);
-
-	ret = 0;
-
-	end:
-	EVP_PKEY_free(pkey);
-	BIO_free_all(out);
-	BIO_free(in);
-
-	return ret;
-	}

apps/pkeyutl.c

@@ -1,570 +0,0 @@
-/* Written by Dr Stephen N Henson (steve@openssl.org) for the OpenSSL
- * project 2006.
- */
-/* ====================================================================
- * Copyright (c) 2006 The OpenSSL Project.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer. 
- *
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- *
- * 3. All advertising materials mentioning features or use of this
- *    software must display the following acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit. (http://www.OpenSSL.org/)"
- *
- * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
- *    endorse or promote products derived from this software without
- *    prior written permission. For written permission, please contact
- *    licensing@OpenSSL.org.
- *
- * 5. Products derived from this software may not be called "OpenSSL"
- *    nor may "OpenSSL" appear in their names without prior written
- *    permission of the OpenSSL Project.
- *
- * 6. Redistributions of any form whatsoever must retain the following
- *    acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit (http://www.OpenSSL.org/)"
- *
- * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
- * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE OpenSSL PROJECT OR
- * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
- * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
- * OF THE POSSIBILITY OF SUCH DAMAGE.
- * ====================================================================
- *
- * This product includes cryptographic software written by Eric Young
- * (eay@cryptsoft.com).  This product includes software written by Tim
- * Hudson (tjh@cryptsoft.com).
- *
- */
-
-
-#include "apps.h"
-#include <string.h>
-#include <openssl/err.h>
-#include <openssl/pem.h>
-#include <openssl/evp.h>
-
-#define KEY_PRIVKEY	1
-#define KEY_PUBKEY	2
-#define KEY_CERT	3
-
-static void usage(void);
-
-#undef PROG
-
-#define PROG pkeyutl_main
-
-static EVP_PKEY_CTX *init_ctx(int *pkeysize,
-				char *keyfile, int keyform, int key_type,
-				char *passargin, int pkey_op, ENGINE *e);
-
-static int setup_peer(BIO *err, EVP_PKEY_CTX *ctx, int peerform,
-							const char *file);
-
-static int do_keyop(EVP_PKEY_CTX *ctx, int pkey_op,
-		unsigned char *out, size_t *poutlen,
-		unsigned char *in, size_t inlen);
-
-int MAIN(int argc, char **);
-
-int MAIN(int argc, char **argv)
-{
-	BIO *in = NULL, *out = NULL;
-	char *infile = NULL, *outfile = NULL, *sigfile = NULL;
-	ENGINE *e = NULL;
-	int pkey_op = EVP_PKEY_OP_SIGN, key_type = KEY_PRIVKEY;
-	int keyform = FORMAT_PEM, peerform = FORMAT_PEM;
-	char badarg = 0, rev = 0;
-	char hexdump = 0, asn1parse = 0;
-	EVP_PKEY_CTX *ctx = NULL;
-	char *passargin = NULL;
-	int keysize = -1;
-
-	unsigned char *buf_in = NULL, *buf_out = NULL, *sig = NULL;
-	size_t buf_outlen;
-	int buf_inlen = 0, siglen = -1;
-
-	int ret = 1, rv = -1;
-
-	argc--;
-	argv++;
-
-	if(!bio_err) bio_err = BIO_new_fp(stderr, BIO_NOCLOSE);
-
-	if (!load_config(bio_err, NULL))
-		goto end;
-	ERR_load_crypto_strings();
-	OpenSSL_add_all_algorithms();
-	
-	while(argc >= 1)
-		{
-		if (!strcmp(*argv,"-in"))
-			{
-			if (--argc < 1) badarg = 1;
-                        else infile= *(++argv);
-			}
-		else if (!strcmp(*argv,"-out"))
-			{
-			if (--argc < 1) badarg = 1;
-			else outfile= *(++argv);
-			}
-		else if (!strcmp(*argv,"-sigfile"))
-			{
-			if (--argc < 1) badarg = 1;
-			else sigfile= *(++argv);
-			}
-		else if(!strcmp(*argv, "-inkey"))
-			{
-			if (--argc < 1)
-				badarg = 1;
-			else
-				{
-				ctx = init_ctx(&keysize,
-						*(++argv), keyform, key_type,
-						passargin, pkey_op, e);
-				if (!ctx)
-					{
-					BIO_puts(bio_err,
-						"Error initializing context\n");
-					ERR_print_errors(bio_err);
-					badarg = 1;
-					}
-				}
-			}
-		else if (!strcmp(*argv,"-peerkey"))
-			{
-			if (--argc < 1)
-				badarg = 1;
-			else if (!setup_peer(bio_err, ctx, peerform, *(++argv)))
-				badarg = 1;
-			}
-		else if (!strcmp(*argv,"-passin"))
-			{
-			if (--argc < 1) badarg = 1;
-			else passargin= *(++argv);
-			}
-		else if (strcmp(*argv,"-peerform") == 0)
-			{
-			if (--argc < 1) badarg = 1;
-			else peerform=str2fmt(*(++argv));
-			}
-		else if (strcmp(*argv,"-keyform") == 0)
-			{
-			if (--argc < 1) badarg = 1;
-			else keyform=str2fmt(*(++argv));
-			}
-#ifndef OPENSSL_NO_ENGINE
-		else if(!strcmp(*argv, "-engine"))
-			{
-			if (--argc < 1)
-				badarg = 1;
-			else
-				e = setup_engine(bio_err, *(++argv), 0);
-			}
-#endif
-		else if(!strcmp(*argv, "-pubin"))
-			key_type = KEY_PUBKEY;
-		else if(!strcmp(*argv, "-certin"))
-			key_type = KEY_CERT;
-		else if(!strcmp(*argv, "-asn1parse"))
-			asn1parse = 1;
-		else if(!strcmp(*argv, "-hexdump"))
-			hexdump = 1;
-		else if(!strcmp(*argv, "-sign"))
-			pkey_op = EVP_PKEY_OP_SIGN;
-		else if(!strcmp(*argv, "-verify"))
-			pkey_op = EVP_PKEY_OP_VERIFY;
-		else if(!strcmp(*argv, "-verifyrecover"))
-			pkey_op = EVP_PKEY_OP_VERIFYRECOVER;
-		else if(!strcmp(*argv, "-rev"))
-			rev = 1;
-		else if(!strcmp(*argv, "-encrypt"))
-			pkey_op = EVP_PKEY_OP_ENCRYPT;
-		else if(!strcmp(*argv, "-decrypt"))
-			pkey_op = EVP_PKEY_OP_DECRYPT;
-		else if(!strcmp(*argv, "-derive"))
-			pkey_op = EVP_PKEY_OP_DERIVE;
-		else if (strcmp(*argv,"-pkeyopt") == 0)
-			{
-			if (--argc < 1)
-				badarg = 1;
-			else if (!ctx)
-				{
-				BIO_puts(bio_err,
-					"-pkeyopt command before -inkey\n");
-				badarg = 1;
-				}
-			else if (pkey_ctrl_string(ctx, *(++argv)) <= 0)
-				{
-				BIO_puts(bio_err, "parameter setting error\n");
-				ERR_print_errors(bio_err);
-				goto end;
-				}
-			}
-		else badarg = 1;
-		if(badarg)
-			{
-			usage();
-			goto end;
-			}
-		argc--;
-		argv++;
-		}
-
-	if (!ctx)
-		{
-		usage();
-		goto end;
-		}
-
-	if (sigfile && (pkey_op != EVP_PKEY_OP_VERIFY))
-		{
-		BIO_puts(bio_err, "Signature file specified for non verify\n");
-		goto end;
-		}
-
-	if (!sigfile && (pkey_op == EVP_PKEY_OP_VERIFY))
-		{
-		BIO_puts(bio_err, "No signature file specified for verify\n");
-		goto end;
-		}
-
-/* FIXME: seed PRNG only if needed */
-	app_RAND_load_file(NULL, bio_err, 0);
-
-	if (pkey_op != EVP_PKEY_OP_DERIVE)
-		{
-		if(infile)
-			{
-			if(!(in = BIO_new_file(infile, "rb")))
-				{
-				BIO_puts(bio_err,
-					"Error Opening Input File\n");
-				ERR_print_errors(bio_err);	
-				goto end;
-				}
-			}
-		else
-			in = BIO_new_fp(stdin, BIO_NOCLOSE);
-		}
-
-	if(outfile)
-		{
-		if(!(out = BIO_new_file(outfile, "wb")))
-			{
-			BIO_printf(bio_err, "Error Creating Output File\n");
-			ERR_print_errors(bio_err);	
-			goto end;
-			}
-		}
-	else
-		{
-		out = BIO_new_fp(stdout, BIO_NOCLOSE);
-#ifdef OPENSSL_SYS_VMS
-		{
-		    BIO *tmpbio = BIO_new(BIO_f_linebuffer());
-		    out = BIO_push(tmpbio, out);
-		}
-#endif
-	}
-
-	if (sigfile)
-		{
-		BIO *sigbio = BIO_new_file(sigfile, "rb");
-		if (!sigbio)
-			{
-			BIO_printf(bio_err, "Can't open signature file %s\n",
-								sigfile);
-			goto end;
-			}
-		siglen = bio_to_mem(&sig, keysize * 10, sigbio);
-		BIO_free(sigbio);
-		if (siglen <= 0)
-			{
-			BIO_printf(bio_err, "Error reading signature data\n");
-			goto end;
-			}
-		}
-	
-	if (in)
-		{
-		/* Read the input data */
-		buf_inlen = bio_to_mem(&buf_in, keysize * 10, in);
-		if(buf_inlen <= 0)
-			{
-			BIO_printf(bio_err, "Error reading input Data\n");
-			exit(1);
-			}
-		if(rev)
-			{
-			size_t i;
-			unsigned char ctmp;
-			size_t l = (size_t)buf_inlen;
-			for(i = 0; i < l/2; i++)
-				{
-				ctmp = buf_in[i];
-				buf_in[i] = buf_in[l - 1 - i];
-				buf_in[l - 1 - i] = ctmp;
-				}
-			}
-		}
-
-	if(pkey_op == EVP_PKEY_OP_VERIFY)
-		{
-		rv  = EVP_PKEY_verify(ctx, sig, (size_t)siglen,
-				      buf_in, (size_t)buf_inlen);
-		if (rv == 0)
-			BIO_puts(out, "Signature Verification Failure\n");
-		else if (rv == 1)
-			BIO_puts(out, "Signature Verified Successfully\n");
-		if (rv >= 0)
-			goto end;
-		}
-	else
-		{	
-		rv = do_keyop(ctx, pkey_op, NULL, (size_t *)&buf_outlen,
-			      buf_in, (size_t)buf_inlen);
-		if (rv > 0)
-			{
-			buf_out = OPENSSL_malloc(buf_outlen);
-			if (!buf_out)
-				rv = -1;
-			else
-				rv = do_keyop(ctx, pkey_op,
-						buf_out, (size_t *)&buf_outlen,
-						buf_in, (size_t)buf_inlen);
-			}
-		}
-
-	if(rv <= 0)
-		{
-		BIO_printf(bio_err, "Public Key operation error\n");
-		ERR_print_errors(bio_err);
-		goto end;
-		}
-	ret = 0;
-	if(asn1parse)
-		{
-		if(!ASN1_parse_dump(out, buf_out, buf_outlen, 1, -1))
-			ERR_print_errors(bio_err);
-		}
-	else if(hexdump)
-		BIO_dump(out, (char *)buf_out, buf_outlen);
-	else
-		BIO_write(out, buf_out, buf_outlen);
-
-	end:
-	if (ctx)
-		EVP_PKEY_CTX_free(ctx);
-	BIO_free(in);
-	BIO_free_all(out);
-	if (buf_in)
-		OPENSSL_free(buf_in);
-	if (buf_out)
-		OPENSSL_free(buf_out);
-	if (sig)
-		OPENSSL_free(sig);
-	return ret;
-}
-
-static void usage()
-{
-	BIO_printf(bio_err, "Usage: pkeyutl [options]\n");
-	BIO_printf(bio_err, "-in file        input file\n");
-	BIO_printf(bio_err, "-out file       output file\n");
-	BIO_printf(bio_err, "-sigfile file signature file (verify operation only)\n");
-	BIO_printf(bio_err, "-inkey file     input key\n");
-	BIO_printf(bio_err, "-keyform arg    private key format - default PEM\n");
-	BIO_printf(bio_err, "-pubin          input is a public key\n");
-	BIO_printf(bio_err, "-certin         input is a certificate carrying a public key\n");
-	BIO_printf(bio_err, "-pkeyopt X:Y    public key options\n");
-	BIO_printf(bio_err, "-sign           sign with private key\n");
-	BIO_printf(bio_err, "-verify         verify with public key\n");
-	BIO_printf(bio_err, "-verifyrecover  verify with public key, recover original data\n");
-	BIO_printf(bio_err, "-encrypt        encrypt with public key\n");
-	BIO_printf(bio_err, "-decrypt        decrypt with private key\n");
-	BIO_printf(bio_err, "-derive         derive shared secret\n");
-	BIO_printf(bio_err, "-hexdump        hex dump output\n");
-#ifndef OPENSSL_NO_ENGINE
-	BIO_printf(bio_err, "-engine e       use engine e, possibly a hardware device.\n");
-#endif
-	BIO_printf(bio_err, "-passin arg     pass phrase source\n");
-
-}
-
-static EVP_PKEY_CTX *init_ctx(int *pkeysize,
-				char *keyfile, int keyform, int key_type,
-				char *passargin, int pkey_op, ENGINE *e)
-	{
-	EVP_PKEY *pkey = NULL;
-	EVP_PKEY_CTX *ctx = NULL;
-	char *passin = NULL;
-	int rv = -1;
-	X509 *x;
-	if(((pkey_op == EVP_PKEY_OP_SIGN) || (pkey_op == EVP_PKEY_OP_DECRYPT) 
-		|| (pkey_op == EVP_PKEY_OP_DERIVE))
-		&& (key_type != KEY_PRIVKEY))
-		{
-		BIO_printf(bio_err, "A private key is needed for this operation\n");
-		goto end;
-		}
-	if(!app_passwd(bio_err, passargin, NULL, &passin, NULL))
-		{
-		BIO_printf(bio_err, "Error getting password\n");
-		goto end;
-		}
-	switch(key_type)
-		{
-		case KEY_PRIVKEY:
-		pkey = load_key(bio_err, keyfile, keyform, 0,
-			passin, e, "Private Key");
-		break;
-
-		case KEY_PUBKEY:
-		pkey = load_pubkey(bio_err, keyfile, keyform, 0,
-			NULL, e, "Public Key");
-		break;
-
-		case KEY_CERT:
-		x = load_cert(bio_err, keyfile, keyform,
-			NULL, e, "Certificate");
-		if(x)
-			{
-			pkey = X509_get_pubkey(x);
-			X509_free(x);
-			}
-		break;
-
-		}
-
-	*pkeysize = EVP_PKEY_size(pkey);
-
-	if (!pkey)
-		goto end;
-
-	ctx = EVP_PKEY_CTX_new(pkey, e);
-
-	EVP_PKEY_free(pkey);
-
-	if (!ctx)
-		goto end;
-
-	switch(pkey_op)
-		{
-		case EVP_PKEY_OP_SIGN:
-		rv = EVP_PKEY_sign_init(ctx);
-		break;
-
-		case EVP_PKEY_OP_VERIFY:
-		rv = EVP_PKEY_verify_init(ctx);
-		break;
-
-		case EVP_PKEY_OP_VERIFYRECOVER:
-		rv = EVP_PKEY_verify_recover_init(ctx);
-		break;
-
-		case EVP_PKEY_OP_ENCRYPT:
-		rv = EVP_PKEY_encrypt_init(ctx);
-		break;
-
-		case EVP_PKEY_OP_DECRYPT:
-		rv = EVP_PKEY_decrypt_init(ctx);
-		break;
-
-		case EVP_PKEY_OP_DERIVE:
-		rv = EVP_PKEY_derive_init(ctx);
-		break;
-		}
-
-	if (rv <= 0)
-		{
-		EVP_PKEY_CTX_free(ctx);
-		ctx = NULL;
-		}
-
-	end:
-
-	if (passin)
-		OPENSSL_free(passin);
-
-	return ctx;
-
-
-	}
-
-static int setup_peer(BIO *err, EVP_PKEY_CTX *ctx, int peerform,
-							const char *file)
-	{
-	EVP_PKEY *peer = NULL;
-	int ret;
-	if (!ctx)
-		{
-		BIO_puts(err, "-peerkey command before -inkey\n");
-		return 0;
-		}
-		
-	peer = load_pubkey(bio_err, file, peerform, 0, NULL, NULL, "Peer Key");
-
-	if (!peer)
-		{
-		BIO_printf(bio_err, "Error reading peer key %s\n", file);
-		ERR_print_errors(err);
-		return 0;
-		}
-
-	ret = EVP_PKEY_derive_set_peer(ctx, peer);
-
-	EVP_PKEY_free(peer);
-	if (ret <= 0)
-		ERR_print_errors(err);
-	return ret;
-	}
-
-static int do_keyop(EVP_PKEY_CTX *ctx, int pkey_op,
-		unsigned char *out, size_t *poutlen,
-		unsigned char *in, size_t inlen)
-	{
-	int rv = 0;
-	switch(pkey_op)
-		{
-		case EVP_PKEY_OP_VERIFYRECOVER:
-		rv  = EVP_PKEY_verify_recover(ctx, out, poutlen, in, inlen);
-		break;
-
-		case EVP_PKEY_OP_SIGN:
-		rv  = EVP_PKEY_sign(ctx, out, poutlen, in, inlen);
-		break;
-
-		case EVP_PKEY_OP_ENCRYPT:
-		rv  = EVP_PKEY_encrypt(ctx, out, poutlen, in, inlen);
-		break;
-
-		case EVP_PKEY_OP_DECRYPT:
-		rv  = EVP_PKEY_decrypt(ctx, out, poutlen, in, inlen);
-		break; 
-
-		case EVP_PKEY_OP_DERIVE:
-		rv  = EVP_PKEY_derive(ctx, out, poutlen);
-		break;
-
-		}
-	return rv;
-	}

apps/prime.c

@@ -56,15 +56,10 @@
 #undef PROG
 #define PROG prime_main
 
-int MAIN(int, char **);
-
 int MAIN(int argc, char **argv)
     {
     int hex=0;
     int checks=20;
-    int generate=0;
-    int bits=0;
-    int safe=0;
     BIGNUM *bn=NULL;
     BIO *bio_out;
 
@@ -80,15 +75,6 @@ int MAIN(int argc, char **argv)
 	{
 	if(!strcmp(*argv,"-hex"))
 	    hex=1;
-	else if(!strcmp(*argv,"-generate"))
-	    generate=1;
-	else if(!strcmp(*argv,"-bits"))
-	    if(--argc < 1)
-		goto bad;
-	    else
-		bits=atoi(*++argv);
-	else if(!strcmp(*argv,"-safe"))
-	    safe=1;
 	else if(!strcmp(*argv,"-checks"))
 	    if(--argc < 1)
 		goto bad;
@@ -103,13 +89,13 @@ int MAIN(int argc, char **argv)
 	++argv;
 	}
 
-    if (argv[0] == NULL && !generate)
+    if (argv[0] == NULL)
 	{
 	BIO_printf(bio_err,"No prime specified\n");
 	goto bad;
 	}
 
-    if ((bio_out=BIO_new(BIO_s_file())) != NULL)
+   if ((bio_out=BIO_new(BIO_s_file())) != NULL)
 	{
 	BIO_set_fp(bio_out,stdout,BIO_NOCLOSE);
 #ifdef OPENSSL_SYS_VMS
@@ -120,32 +106,14 @@ int MAIN(int argc, char **argv)
 #endif
 	}
 
-    if(generate)
-	{
-	char *s;
-
-	if(!bits)
-	    {
-	    BIO_printf(bio_err,"Specifiy the number of bits.\n");
-	    return 1;
-	    }
-	bn=BN_new();
-	BN_generate_prime_ex(bn,bits,safe,NULL,NULL,NULL);
-	s=hex ? BN_bn2hex(bn) : BN_bn2dec(bn);
-	BIO_printf(bio_out,"%s\n",s);
-	OPENSSL_free(s);
-	}
+    if(hex)
+	BN_hex2bn(&bn,argv[0]);
     else
-	{
-	if(hex)
-	    BN_hex2bn(&bn,argv[0]);
-	else
-	    BN_dec2bn(&bn,argv[0]);
+	BN_dec2bn(&bn,argv[0]);
 
-	BN_print(bio_out,bn);
-	BIO_printf(bio_out," is %sprime\n",
-		   BN_is_prime_ex(bn,checks,NULL,NULL) ? "" : "not ");
-	}
+    BN_print(bio_out,bn);
+    BIO_printf(bio_out," is %sprime\n",
+	       BN_is_prime(bn,checks,NULL,NULL,NULL) ? "" : "not ");
 
     BN_free(bn);
     BIO_free_all(bio_out);

apps/progs.h

@@ -17,49 +17,39 @@ extern int rsa_main(int argc,char *argv[]);
 extern int rsautl_main(int argc,char *argv[]);
 extern int dsa_main(int argc,char *argv[]);
 extern int dsaparam_main(int argc,char *argv[]);
-extern int ec_main(int argc,char *argv[]);
-extern int ecparam_main(int argc,char *argv[]);
 extern int x509_main(int argc,char *argv[]);
 extern int genrsa_main(int argc,char *argv[]);
 extern int gendsa_main(int argc,char *argv[]);
-extern int genpkey_main(int argc,char *argv[]);
 extern int s_server_main(int argc,char *argv[]);
 extern int s_client_main(int argc,char *argv[]);
 extern int speed_main(int argc,char *argv[]);
 extern int s_time_main(int argc,char *argv[]);
 extern int version_main(int argc,char *argv[]);
 extern int pkcs7_main(int argc,char *argv[]);
-extern int cms_main(int argc,char *argv[]);
 extern int crl2pkcs7_main(int argc,char *argv[]);
 extern int sess_id_main(int argc,char *argv[]);
 extern int ciphers_main(int argc,char *argv[]);
 extern int nseq_main(int argc,char *argv[]);
 extern int pkcs12_main(int argc,char *argv[]);
 extern int pkcs8_main(int argc,char *argv[]);
-extern int pkey_main(int argc,char *argv[]);
-extern int pkeyparam_main(int argc,char *argv[]);
-extern int pkeyutl_main(int argc,char *argv[]);
 extern int spkac_main(int argc,char *argv[]);
 extern int smime_main(int argc,char *argv[]);
 extern int rand_main(int argc,char *argv[]);
-extern int engine_main(int argc,char *argv[]);
-extern int ocsp_main(int argc,char *argv[]);
 extern int prime_main(int argc,char *argv[]);
-extern int ts_main(int argc,char *argv[]);
+#ifndef OPENSSL_NO_ENGINE
+extern int engine_main(int argc,char *argv[]);
+#endif
+extern int ocsp_main(int argc,char *argv[]);
 
 #define FUNC_TYPE_GENERAL	1
 #define FUNC_TYPE_MD		2
 #define FUNC_TYPE_CIPHER	3
-#define FUNC_TYPE_PKEY		4
-#define FUNC_TYPE_MD_ALG	5
-#define FUNC_TYPE_CIPHER_ALG	6
 
 typedef struct {
 	int type;
-	const char *name;
-	int (*func)(int argc,char *argv[]);
+	char *name;
+	int (*func)();
 	} FUNCTION;
-DECLARE_LHASH_OF(FUNCTION);
 
 FUNCTION functions[] = {
 	{FUNC_TYPE_GENERAL,"verify",verify_main},
@@ -91,12 +81,6 @@ FUNCTION functions[] = {
 #endif
 #ifndef OPENSSL_NO_DSA
 	{FUNC_TYPE_GENERAL,"dsaparam",dsaparam_main},
-#endif
-#ifndef OPENSSL_NO_EC
-	{FUNC_TYPE_GENERAL,"ec",ec_main},
-#endif
-#ifndef OPENSSL_NO_EC
-	{FUNC_TYPE_GENERAL,"ecparam",ecparam_main},
 #endif
 	{FUNC_TYPE_GENERAL,"x509",x509_main},
 #ifndef OPENSSL_NO_RSA
@@ -105,7 +89,6 @@ FUNCTION functions[] = {
 #ifndef OPENSSL_NO_DSA
 	{FUNC_TYPE_GENERAL,"gendsa",gendsa_main},
 #endif
-	{FUNC_TYPE_GENERAL,"genpkey",genpkey_main},
 #if !defined(OPENSSL_NO_SOCK) && !(defined(OPENSSL_NO_SSL2) && defined(OPENSSL_NO_SSL3))
 	{FUNC_TYPE_GENERAL,"s_server",s_server_main},
 #endif
@@ -120,9 +103,6 @@ FUNCTION functions[] = {
 #endif
 	{FUNC_TYPE_GENERAL,"version",version_main},
 	{FUNC_TYPE_GENERAL,"pkcs7",pkcs7_main},
-#ifndef OPENSSL_NO_CMS
-	{FUNC_TYPE_GENERAL,"cms",cms_main},
-#endif
 	{FUNC_TYPE_GENERAL,"crl2pkcs7",crl2pkcs7_main},
 	{FUNC_TYPE_GENERAL,"sess_id",sess_id_main},
 #if !defined(OPENSSL_NO_SOCK) && !(defined(OPENSSL_NO_SSL2) && defined(OPENSSL_NO_SSL3))
@@ -133,20 +113,14 @@ FUNCTION functions[] = {
 	{FUNC_TYPE_GENERAL,"pkcs12",pkcs12_main},
 #endif
 	{FUNC_TYPE_GENERAL,"pkcs8",pkcs8_main},
-	{FUNC_TYPE_GENERAL,"pkey",pkey_main},
-	{FUNC_TYPE_GENERAL,"pkeyparam",pkeyparam_main},
-	{FUNC_TYPE_GENERAL,"pkeyutl",pkeyutl_main},
 	{FUNC_TYPE_GENERAL,"spkac",spkac_main},
 	{FUNC_TYPE_GENERAL,"smime",smime_main},
 	{FUNC_TYPE_GENERAL,"rand",rand_main},
+	{FUNC_TYPE_GENERAL,"prime",prime_main},
 #ifndef OPENSSL_NO_ENGINE
 	{FUNC_TYPE_GENERAL,"engine",engine_main},
 #endif
-#ifndef OPENSSL_NO_OCSP
 	{FUNC_TYPE_GENERAL,"ocsp",ocsp_main},
-#endif
-	{FUNC_TYPE_GENERAL,"prime",prime_main},
-	{FUNC_TYPE_GENERAL,"ts",ts_main},
 #ifndef OPENSSL_NO_MD2
 	{FUNC_TYPE_MD,"md2",dgst_main},
 #endif
@@ -185,29 +159,8 @@ FUNCTION functions[] = {
 #endif
 #ifndef OPENSSL_NO_AES
 	{FUNC_TYPE_CIPHER,"aes-256-ecb",enc_main},
-#endif
-#ifndef OPENSSL_NO_CAMELLIA
-	{FUNC_TYPE_CIPHER,"camellia-128-cbc",enc_main},
-#endif
-#ifndef OPENSSL_NO_CAMELLIA
-	{FUNC_TYPE_CIPHER,"camellia-128-ecb",enc_main},
-#endif
-#ifndef OPENSSL_NO_CAMELLIA
-	{FUNC_TYPE_CIPHER,"camellia-192-cbc",enc_main},
-#endif
-#ifndef OPENSSL_NO_CAMELLIA
-	{FUNC_TYPE_CIPHER,"camellia-192-ecb",enc_main},
-#endif
-#ifndef OPENSSL_NO_CAMELLIA
-	{FUNC_TYPE_CIPHER,"camellia-256-cbc",enc_main},
-#endif
-#ifndef OPENSSL_NO_CAMELLIA
-	{FUNC_TYPE_CIPHER,"camellia-256-ecb",enc_main},
 #endif
 	{FUNC_TYPE_CIPHER,"base64",enc_main},
-#ifdef ZLIB
-	{FUNC_TYPE_CIPHER,"zlib",enc_main},
-#endif
 #ifndef OPENSSL_NO_DES
 	{FUNC_TYPE_CIPHER,"des",enc_main},
 #endif
@@ -220,9 +173,6 @@ FUNCTION functions[] = {
 #ifndef OPENSSL_NO_IDEA
 	{FUNC_TYPE_CIPHER,"idea",enc_main},
 #endif
-#ifndef OPENSSL_NO_SEED
-	{FUNC_TYPE_CIPHER,"seed",enc_main},
-#endif
 #ifndef OPENSSL_NO_RC4
 	{FUNC_TYPE_CIPHER,"rc4",enc_main},
 #endif
@@ -289,18 +239,6 @@ FUNCTION functions[] = {
 #ifndef OPENSSL_NO_IDEA
 	{FUNC_TYPE_CIPHER,"idea-ofb",enc_main},
 #endif
-#ifndef OPENSSL_NO_SEED
-	{FUNC_TYPE_CIPHER,"seed-cbc",enc_main},
-#endif
-#ifndef OPENSSL_NO_SEED
-	{FUNC_TYPE_CIPHER,"seed-ecb",enc_main},
-#endif
-#ifndef OPENSSL_NO_SEED
-	{FUNC_TYPE_CIPHER,"seed-cfb",enc_main},
-#endif
-#ifndef OPENSSL_NO_SEED
-	{FUNC_TYPE_CIPHER,"seed-ofb",enc_main},
-#endif
 #ifndef OPENSSL_NO_RC2
 	{FUNC_TYPE_CIPHER,"rc2-cbc",enc_main},
 #endif

apps/progs.pl

@@ -13,16 +13,12 @@ print <<'EOF';
 #define FUNC_TYPE_GENERAL	1
 #define FUNC_TYPE_MD		2
 #define FUNC_TYPE_CIPHER	3
-#define FUNC_TYPE_PKEY		4
-#define FUNC_TYPE_MD_ALG	5
-#define FUNC_TYPE_CIPHER_ALG	6
 
 typedef struct {
 	int type;
-	const char *name;
-	int (*func)(int argc,char *argv[]);
+	char *name;
+	int (*func)();
 	} FUNCTION;
-DECLARE_LHASH_OF(FUNCTION);
 
 FUNCTION functions[] = {
 EOF
@@ -33,24 +29,14 @@ foreach (@ARGV)
 	$str="\t{FUNC_TYPE_GENERAL,\"$_\",${_}_main},\n";
 	if (($_ =~ /^s_/) || ($_ =~ /^ciphers$/))
 		{ print "#if !defined(OPENSSL_NO_SOCK) && !(defined(OPENSSL_NO_SSL2) && defined(OPENSSL_NO_SSL3))\n${str}#endif\n"; } 
-	elsif ( ($_ =~ /^speed$/))
-		{ print "#ifndef OPENSSL_NO_SPEED\n${str}#endif\n"; }
-	elsif ( ($_ =~ /^engine$/))
-		{ print "#ifndef OPENSSL_NO_ENGINE\n${str}#endif\n"; }
 	elsif ( ($_ =~ /^rsa$/) || ($_ =~ /^genrsa$/) || ($_ =~ /^rsautl$/)) 
 		{ print "#ifndef OPENSSL_NO_RSA\n${str}#endif\n";  }
 	elsif ( ($_ =~ /^dsa$/) || ($_ =~ /^gendsa$/) || ($_ =~ /^dsaparam$/))
 		{ print "#ifndef OPENSSL_NO_DSA\n${str}#endif\n"; }
-	elsif ( ($_ =~ /^ec$/) || ($_ =~ /^ecparam$/))
-		{ print "#ifndef OPENSSL_NO_EC\n${str}#endif\n";}
 	elsif ( ($_ =~ /^dh$/) || ($_ =~ /^gendh$/) || ($_ =~ /^dhparam$/))
 		{ print "#ifndef OPENSSL_NO_DH\n${str}#endif\n"; }
 	elsif ( ($_ =~ /^pkcs12$/))
 		{ print "#if !defined(OPENSSL_NO_DES) && !defined(OPENSSL_NO_SHA1)\n${str}#endif\n"; }
-	elsif ( ($_ =~ /^cms$/))
-		{ print "#ifndef OPENSSL_NO_CMS\n${str}#endif\n"; }
-	elsif ( ($_ =~ /^ocsp$/))
-		{ print "#ifndef OPENSSL_NO_OCSP\n${str}#endif\n"; }
 	else
 		{ print $str; }
 	}
@@ -65,18 +51,14 @@ foreach (
 	"aes-128-cbc", "aes-128-ecb",
 	"aes-192-cbc", "aes-192-ecb",
 	"aes-256-cbc", "aes-256-ecb",
-	"camellia-128-cbc", "camellia-128-ecb",
-	"camellia-192-cbc", "camellia-192-ecb",
-	"camellia-256-cbc", "camellia-256-ecb",
-	"base64", "zlib",
-	"des", "des3", "desx", "idea", "seed", "rc4", "rc4-40",
+	"base64",
+	"des", "des3", "desx", "idea", "rc4", "rc4-40",
 	"rc2", "bf", "cast", "rc5",
 	"des-ecb", "des-ede",    "des-ede3",
 	"des-cbc", "des-ede-cbc","des-ede3-cbc",
 	"des-cfb", "des-ede-cfb","des-ede3-cfb",
 	"des-ofb", "des-ede-ofb","des-ede3-ofb",
-	"idea-cbc","idea-ecb",    "idea-cfb", "idea-ofb",
-	"seed-cbc","seed-ecb",    "seed-cfb", "seed-ofb",
+	"idea-cbc","idea-ecb",   "idea-cfb", "idea-ofb",
 	"rc2-cbc", "rc2-ecb", "rc2-cfb","rc2-ofb", "rc2-64-cbc", "rc2-40-cbc",
 	"bf-cbc",  "bf-ecb",     "bf-cfb",   "bf-ofb",
 	"cast5-cbc","cast5-ecb", "cast5-cfb","cast5-ofb",
@@ -87,15 +69,12 @@ foreach (
 	$t=sprintf("\t{FUNC_TYPE_CIPHER,\"%s\",enc_main},\n",$_);
 	if    ($_ =~ /des/)  { $t="#ifndef OPENSSL_NO_DES\n${t}#endif\n"; }
 	elsif ($_ =~ /aes/)  { $t="#ifndef OPENSSL_NO_AES\n${t}#endif\n"; }
-	elsif ($_ =~ /camellia/)  { $t="#ifndef OPENSSL_NO_CAMELLIA\n${t}#endif\n"; }
 	elsif ($_ =~ /idea/) { $t="#ifndef OPENSSL_NO_IDEA\n${t}#endif\n"; }
-	elsif ($_ =~ /seed/) { $t="#ifndef OPENSSL_NO_SEED\n${t}#endif\n"; }
 	elsif ($_ =~ /rc4/)  { $t="#ifndef OPENSSL_NO_RC4\n${t}#endif\n"; }
 	elsif ($_ =~ /rc2/)  { $t="#ifndef OPENSSL_NO_RC2\n${t}#endif\n"; }
 	elsif ($_ =~ /bf/)   { $t="#ifndef OPENSSL_NO_BF\n${t}#endif\n"; }
 	elsif ($_ =~ /cast/) { $t="#ifndef OPENSSL_NO_CAST\n${t}#endif\n"; }
 	elsif ($_ =~ /rc5/)  { $t="#ifndef OPENSSL_NO_RC5\n${t}#endif\n"; }
-	elsif ($_ =~ /zlib/)  { $t="#ifdef ZLIB\n${t}#endif\n"; }
 	print $t;
 	}
 

apps/rand.c

@@ -68,8 +68,7 @@
 
 /* -out file         - write to file
  * -rand file:file   - PRNG seed files
- * -base64           - base64 encode output
- * -hex              - hex encode output
+ * -base64           - encode output
  * num               - write 'num' bytes
  */
 
@@ -77,12 +76,14 @@ int MAIN(int, char **);
 
 int MAIN(int argc, char **argv)
 	{
+#ifndef OPENSSL_NO_ENGINE
+	ENGINE *e = NULL;
+#endif
 	int i, r, ret = 1;
 	int badopt;
 	char *outfile = NULL;
 	char *inrand = NULL;
 	int base64 = 0;
-	int hex = 0;
 	BIO *out = NULL;
 	int num = -1;
 #ifndef OPENSSL_NO_ENGINE
@@ -132,13 +133,6 @@ int MAIN(int argc, char **argv)
 			else
 				badopt = 1;
 			}
-		else if (strcmp(argv[i], "-hex") == 0)
-			{
-			if (!hex)
-				hex = 1;
-			else
-				badopt = 1;
-			}
 		else if (isdigit((unsigned char)argv[i][0]))
 			{
 			if (num < 0)
@@ -154,9 +148,6 @@ int MAIN(int argc, char **argv)
 			badopt = 1;
 		}
 
-	if (hex && base64)
-		badopt = 1;
-
 	if (num < 0)
 		badopt = 1;
 	
@@ -169,13 +160,12 @@ int MAIN(int argc, char **argv)
 		BIO_printf(bio_err, "-engine e             - use engine e, possibly a hardware device.\n");
 #endif
 		BIO_printf(bio_err, "-rand file%cfile%c... - seed PRNG from files\n", LIST_SEPARATOR_CHAR, LIST_SEPARATOR_CHAR);
-		BIO_printf(bio_err, "-base64               - base64 encode output\n");
-		BIO_printf(bio_err, "-hex                  - hex encode output\n");
+		BIO_printf(bio_err, "-base64               - encode output\n");
 		goto err;
 		}
 
 #ifndef OPENSSL_NO_ENGINE
-        setup_engine(bio_err, engine, 0);
+        e = setup_engine(bio_err, engine, 0);
 #endif
 
 	app_RAND_load_file(NULL, bio_err, (inrand != NULL));
@@ -215,23 +205,15 @@ int MAIN(int argc, char **argv)
 		int chunk;
 
 		chunk = num;
-		if (chunk > (int)sizeof(buf))
+		if (chunk > sizeof buf)
 			chunk = sizeof buf;
 		r = RAND_bytes(buf, chunk);
 		if (r <= 0)
 			goto err;
-		if (!hex) 
-			BIO_write(out, buf, chunk);
-		else
-			{
-			for (i = 0; i < chunk; i++)
-				BIO_printf(out, "%02x", buf[i]);
-			}
+		BIO_write(out, buf, chunk);
 		num -= chunk;
 		}
-	if (hex)
-		BIO_puts(out, "\n");
-	(void)BIO_flush(out);
+	BIO_flush(out);
 
 	app_RAND_write_file(NULL, bio_err);
 	ret = 0;

apps/req.c

@@ -56,12 +56,6 @@
  * [including the GNU Public Licence.]
  */
 
-/* Until the key-gen callbacks are modified to use newer prototypes, we allow
- * deprecated functions for openssl-internal code */
-#ifdef OPENSSL_NO_DEPRECATED
-#undef OPENSSL_NO_DEPRECATED
-#endif
-
 #include <stdio.h>
 #include <stdlib.h>
 #include <time.h>
@@ -79,13 +73,7 @@
 #include <openssl/x509v3.h>
 #include <openssl/objects.h>
 #include <openssl/pem.h>
-#include <openssl/bn.h>
-#ifndef OPENSSL_NO_RSA
-#include <openssl/rsa.h>
-#endif
-#ifndef OPENSSL_NO_DSA
-#include <openssl/dsa.h>
-#endif
+#include "../crypto/cryptlib.h"
 
 #define SECTION		"req"
 
@@ -125,10 +113,9 @@
  *		  require.  This format is wrong
  */
 
-static int make_REQ(X509_REQ *req,EVP_PKEY *pkey,char *dn,int mutlirdn,
-		int attribs,unsigned long chtype);
-static int build_subject(X509_REQ *req, char *subj, unsigned long chtype,
-		int multirdn);
+static int make_REQ(X509_REQ *req,EVP_PKEY *pkey,char *dn,int attribs,
+		unsigned long chtype);
+static int build_subject(X509_REQ *req, char *subj, unsigned long chtype);
 static int prompt_info(X509_REQ *req,
 		STACK_OF(CONF_VALUE) *dn_sk, char *dn_sect,
 		STACK_OF(CONF_VALUE) *attr_sk, char *attr_sect, int attribs,
@@ -136,38 +123,40 @@ static int prompt_info(X509_REQ *req,
 static int auto_info(X509_REQ *req, STACK_OF(CONF_VALUE) *sk,
 				STACK_OF(CONF_VALUE) *attr, int attribs,
 				unsigned long chtype);
-static int add_attribute_object(X509_REQ *req, char *text, const char *def,
-				char *value, int nid, int n_min,
+static int add_attribute_object(X509_REQ *req, char *text,
+				char *def, char *value, int nid, int n_min,
 				int n_max, unsigned long chtype);
-static int add_DN_object(X509_NAME *n, char *text, const char *def, char *value,
-	int nid,int n_min,int n_max, unsigned long chtype, int mval);
-static int genpkey_cb(EVP_PKEY_CTX *ctx);
+static int add_DN_object(X509_NAME *n, char *text, char *def, char *value,
+	int nid,int n_min,int n_max, unsigned long chtype);
+#ifndef OPENSSL_NO_RSA
+static void MS_CALLBACK req_cb(int p,int n,void *arg);
+#endif
 static int req_check_len(int len,int n_min,int n_max);
-static int check_end(const char *str, const char *end);
-static EVP_PKEY_CTX *set_keygen_ctx(BIO *err, const char *gstr, int *pkey_type,
-					long *pkeylen, char **palgnam,
-					ENGINE *keygen_engine);
+static int check_end(char *str, char *end);
 #ifndef MONOLITH
 static char *default_config_file=NULL;
 #endif
 static CONF *req_conf=NULL;
 static int batch=0;
 
+#define TYPE_RSA	1
+#define TYPE_DSA	2
+#define TYPE_DH		3
+
 int MAIN(int, char **);
 
 int MAIN(int argc, char **argv)
 	{
-	ENGINE *e = NULL, *gen_eng = NULL;
+	ENGINE *e = NULL;
+#ifndef OPENSSL_NO_DSA
+	DSA *dsa_params=NULL;
+#endif
 	unsigned long nmflag = 0, reqflag = 0;
 	int ex=1,x509=0,days=30;
 	X509 *x509ss=NULL;
 	X509_REQ *req=NULL;
-	EVP_PKEY_CTX *genctx = NULL;
-	const char *keyalg = NULL;
-	char *keyalgstr = NULL;
-	STACK_OF(OPENSSL_STRING) *pkeyopts = NULL;
 	EVP_PKEY *pkey=NULL;
-	int i=0,badops=0,newreq=0,verbose=0,pkey_type=-1;
+	int i=0,badops=0,newreq=0,verbose=0,pkey_type=TYPE_RSA;
 	long newkey = -1;
 	BIO *in=NULL,*out=NULL;
 	int informat,outformat,verify=0,noout=0,text=0,keyform=FORMAT_PEM;
@@ -186,8 +175,7 @@ int MAIN(int argc, char **argv)
 	char *passin = NULL, *passout = NULL;
 	char *p;
 	char *subj = NULL;
-	int multirdn = 0;
-	const EVP_MD *md_alg=NULL,*digest=NULL;
+	const EVP_MD *md_alg=NULL,*digest;
 	unsigned long chtype = MBSTRING_ASC;
 #ifndef MONOLITH
 	char *to_free;
@@ -209,6 +197,13 @@ int MAIN(int argc, char **argv)
 	informat=FORMAT_PEM;
 	outformat=FORMAT_PEM;
 
+#ifdef  OPENSSL_FIPS
+	if (FIPS_mode())
+		digest = EVP_sha1();
+	else
+#endif
+		digest = EVP_md5();
+
 	prog=argv[0];
 	argc--;
 	argv++;
@@ -230,16 +225,6 @@ int MAIN(int argc, char **argv)
 			if (--argc < 1) goto bad;
 			engine= *(++argv);
 			}
-		else if (strcmp(*argv,"-keygen_engine") == 0)
-			{
-			if (--argc < 1) goto bad;
-			gen_eng = ENGINE_by_id(*(++argv));
-			if (gen_eng == NULL)
-				{
-				BIO_printf(bio_err, "Can't find keygen engine %s\n", *argv);
-				goto end;
-				}
-			}
 #endif
 		else if (strcmp(*argv,"-key") == 0)
 			{
@@ -296,20 +281,71 @@ int MAIN(int argc, char **argv)
 			}
 		else if (strcmp(*argv,"-newkey") == 0)
 			{
-			if (--argc < 1)
-				goto bad;
-			keyalg = *(++argv);
+			int is_numeric;
+
+			if (--argc < 1) goto bad;
+			p= *(++argv);
+			is_numeric = p[0] >= '0' && p[0] <= '9';
+			if (strncmp("rsa:",p,4) == 0 || is_numeric)
+				{
+				pkey_type=TYPE_RSA;
+				if(!is_numeric)
+				    p+=4;
+				newkey= atoi(p);
+				}
+			else
+#ifndef OPENSSL_NO_DSA
+				if (strncmp("dsa:",p,4) == 0)
+				{
+				X509 *xtmp=NULL;
+				EVP_PKEY *dtmp;
+
+				pkey_type=TYPE_DSA;
+				p+=4;
+				if ((in=BIO_new_file(p,"r")) == NULL)
+					{
+					perror(p);
+					goto end;
+					}
+				if ((dsa_params=PEM_read_bio_DSAparams(in,NULL,NULL,NULL)) == NULL)
+					{
+					ERR_clear_error();
+					(void)BIO_reset(in);
+					if ((xtmp=PEM_read_bio_X509(in,NULL,NULL,NULL)) == NULL)
+						{
+						BIO_printf(bio_err,"unable to load DSA parameters from file\n");
+						goto end;
+						}
+
+					if ((dtmp=X509_get_pubkey(xtmp)) == NULL) goto end;
+					if (dtmp->type == EVP_PKEY_DSA)
+						dsa_params=DSAparams_dup(dtmp->pkey.dsa);
+					EVP_PKEY_free(dtmp);
+					X509_free(xtmp);
+					if (dsa_params == NULL)
+						{
+						BIO_printf(bio_err,"Certificate does not contain DSA parameters\n");
+						goto end;
+						}
+					}
+				BIO_free(in);
+				newkey=BN_num_bits(dsa_params->p);
+				in=NULL;
+				}
+			else 
+#endif
+#ifndef OPENSSL_NO_DH
+				if (strncmp("dh:",p,4) == 0)
+				{
+				pkey_type=TYPE_DH;
+				p+=3;
+				}
+			else
+#endif
+				pkey_type=TYPE_RSA;
+
 			newreq=1;
 			}
-		else if (strcmp(*argv,"-pkeyopt") == 0)
-			{
-			if (--argc < 1)
-				goto bad;
-			if (!pkeyopts)
-				pkeyopts = sk_OPENSSL_STRING_new_null();
-			if (!pkeyopts || !sk_OPENSSL_STRING_push(pkeyopts, *(++argv)))
-				goto bad;
-			}
 		else if (strcmp(*argv,"-batch") == 0)
 			batch=1;
 		else if (strcmp(*argv,"-newhdr") == 0)
@@ -351,8 +387,6 @@ int MAIN(int argc, char **argv)
 			if (--argc < 1) goto bad;
 			subj= *(++argv);
 			}
-		else if (strcmp(*argv,"-multivalue-rdn") == 0)
-			multirdn=1;
 		else if (strcmp(*argv,"-days") == 0)
 			{
 			if (--argc < 1) goto bad;
@@ -365,6 +399,11 @@ int MAIN(int argc, char **argv)
 			serial = s2i_ASN1_INTEGER(NULL, *(++argv));
 			if (!serial) goto bad;
 			}
+		else if ((md_alg=EVP_get_digestbyname(&((*argv)[1]))) != NULL)
+			{
+			/* ok */
+			digest=md_alg;
+			}
 		else if (strcmp(*argv,"-extensions") == 0)
 			{
 			if (--argc < 1) goto bad;
@@ -375,11 +414,6 @@ int MAIN(int argc, char **argv)
 			if (--argc < 1) goto bad;
 			req_exts = *(++argv);
 			}
-		else if ((md_alg=EVP_get_digestbyname(&((*argv)[1]))) != NULL)
-			{
-			/* ok */
-			digest=md_alg;
-			}
 		else
 			{
 			BIO_printf(bio_err,"unknown option %s\n",*argv);
@@ -418,13 +452,9 @@ bad:
 		BIO_printf(bio_err,"                the random number generator\n");
 		BIO_printf(bio_err," -newkey rsa:bits generate a new RSA key of 'bits' in size\n");
 		BIO_printf(bio_err," -newkey dsa:file generate a new DSA key, parameters taken from CA in 'file'\n");
-#ifndef OPENSSL_NO_ECDSA
-		BIO_printf(bio_err," -newkey ec:file generate a new EC key, parameters taken from CA in 'file'\n");
-#endif
 		BIO_printf(bio_err," -[digest]      Digest to sign with (md5, sha1, md2, mdc2, md4)\n");
 		BIO_printf(bio_err," -config file   request template file.\n");
 		BIO_printf(bio_err," -subj arg      set or modify request subject\n");
-		BIO_printf(bio_err," -multivalue-rdn enable support for multivalued RDNs\n");
 		BIO_printf(bio_err," -new           new request.\n");
 		BIO_printf(bio_err," -batch         do not ask anything during request generation\n");
 		BIO_printf(bio_err," -x509          output a x509 structure instead of a cert. req.\n");
@@ -617,7 +647,7 @@ bad:
 			   message */
 			goto end;
 			}
-		else
+		if (EVP_PKEY_type(pkey->type) == EVP_PKEY_DSA)
 			{
 			char *randfile = NCONF_get_string(req_conf,SECTION,"RANDFILE");
 			if (randfile == NULL)
@@ -635,69 +665,46 @@ bad:
 		if (inrand)
 			app_RAND_load_files(inrand);
 	
-		if (keyalg)
-			{
-			genctx = set_keygen_ctx(bio_err, keyalg, &pkey_type, &newkey,
-							&keyalgstr, gen_eng);
-			if (!genctx)
-				goto end;
-			}
-	
 		if (newkey <= 0)
 			{
 			if (!NCONF_get_number(req_conf,SECTION,BITS, &newkey))
 				newkey=DEFAULT_KEY_LENGTH;
 			}
 
-		if (newkey < MIN_KEY_LENGTH && (pkey_type == EVP_PKEY_RSA || pkey_type == EVP_PKEY_DSA))
+		if (newkey < MIN_KEY_LENGTH)
 			{
 			BIO_printf(bio_err,"private key length is too short,\n");
-			BIO_printf(bio_err,"it needs to be at least %d bits, not %ld\n",MIN_KEY_LENGTH,newkey);
+			BIO_printf(bio_err,"it needs to be at least %d bits, not %d\n",MIN_KEY_LENGTH,newkey);
 			goto end;
 			}
+		BIO_printf(bio_err,"Generating a %d bit %s private key\n",
+			newkey,(pkey_type == TYPE_RSA)?"RSA":"DSA");
 
-		if (!genctx)
+		if ((pkey=EVP_PKEY_new()) == NULL) goto end;
+
+#ifndef OPENSSL_NO_RSA
+		if (pkey_type == TYPE_RSA)
 			{
-			genctx = set_keygen_ctx(bio_err, NULL, &pkey_type, &newkey,
-							&keyalgstr, gen_eng);
-			if (!genctx)
+			if (!EVP_PKEY_assign_RSA(pkey,
+				RSA_generate_key(newkey,0x10001,
+					req_cb,bio_err)))
 				goto end;
 			}
-
-		if (pkeyopts)
+		else
+#endif
+#ifndef OPENSSL_NO_DSA
+			if (pkey_type == TYPE_DSA)
 			{
-			char *genopt;
-			for (i = 0; i < sk_OPENSSL_STRING_num(pkeyopts); i++)
-				{
-				genopt = sk_OPENSSL_STRING_value(pkeyopts, i);
-				if (pkey_ctrl_string(genctx, genopt) <= 0)
-					{
-					BIO_printf(bio_err,
-						"parameter error \"%s\"\n",
-						genopt);
-					ERR_print_errors(bio_err);
-					goto end;
-					}
-				}
+			if (!DSA_generate_key(dsa_params)) goto end;
+			if (!EVP_PKEY_assign_DSA(pkey,dsa_params)) goto end;
+			dsa_params=NULL;
 			}
-
-		BIO_printf(bio_err,"Generating a %ld bit %s private key\n",
-				newkey, keyalgstr);
-
-		EVP_PKEY_CTX_set_cb(genctx, genpkey_cb);
-		EVP_PKEY_CTX_set_app_data(genctx, bio_err);
-
-		if (EVP_PKEY_keygen(genctx, &pkey) <= 0)
-			{
-			BIO_puts(bio_err, "Error Generating Key\n");
-			goto end;
-			}
-
-		EVP_PKEY_CTX_free(genctx);
-		genctx = NULL;
+#endif
 
 		app_RAND_write_file(randfile, bio_err);
 
+		if (pkey == NULL) goto end;
+
 		if (keyout == NULL)
 			{
 			keyout=NCONF_get_string(req_conf,SECTION,KEYFILE);
@@ -795,7 +802,10 @@ loop:
 			BIO_printf(bio_err,"you need to specify a private key\n");
 			goto end;
 			}
-
+#ifndef OPENSSL_NO_DSA
+		if (pkey->type == EVP_PKEY_DSA)
+			digest=EVP_dss1();
+#endif
 		if (req == NULL)
 			{
 			req=X509_REQ_new();
@@ -804,7 +814,7 @@ loop:
 				goto end;
 				}
 
-			i=make_REQ(req,pkey,subj,multirdn,!x509, chtype);
+			i=make_REQ(req,pkey,subj,!x509, chtype);
 			subj=NULL; /* done processing '-subj' option */
 			if ((kludge > 0) && !sk_X509_ATTRIBUTE_num(req->req_info->attributes))
 				{
@@ -838,7 +848,7 @@ loop:
 
 			if (!X509_set_issuer_name(x509ss, X509_REQ_get_subject_name(req))) goto end;
 			if (!X509_gmtime_adj(X509_get_notBefore(x509ss),0)) goto end;
-			if (!X509_time_adj_ex(X509_get_notAfter(x509ss), days, 0, NULL)) goto end;
+			if (!X509_gmtime_adj(X509_get_notAfter(x509ss), (long)60*60*24*days)) goto end;
 			if (!X509_set_subject_name(x509ss, X509_REQ_get_subject_name(req))) goto end;
 			tmppkey = X509_REQ_get_pubkey(req);
 			if (!tmppkey || !X509_set_pubkey(x509ss,tmppkey)) goto end;
@@ -860,10 +870,7 @@ loop:
 				}
 			
 			if (!(i=X509_sign(x509ss,pkey,digest)))
-				{
-				ERR_print_errors(bio_err);
 				goto end;
-				}
 			}
 		else
 			{
@@ -884,10 +891,7 @@ loop:
 				goto end;
 				}
 			if (!(i=X509_REQ_sign(req,pkey,digest)))
-				{
-				ERR_print_errors(bio_err);
 				goto end;
-				}
 			}
 		}
 
@@ -905,7 +909,7 @@ loop:
 			print_name(bio_err, "old subject=", X509_REQ_get_subject_name(req), nmflag);
 			}
 
-		if (build_subject(req, subj, chtype, multirdn) == 0)
+		if (build_subject(req, subj, chtype) == 0)
 			{
 			BIO_printf(bio_err, "ERROR: cannot modify subject\n");
 			ex=1;
@@ -1024,7 +1028,7 @@ loop:
 			}
 		fprintf(stdout,"Modulus=");
 #ifndef OPENSSL_NO_RSA
-		if (EVP_PKEY_base_id(tpubkey) == EVP_PKEY_RSA)
+		if (tpubkey->type == EVP_PKEY_RSA)
 			BN_print(out,tpubkey->pkey.rsa->n);
 		else
 #endif
@@ -1080,28 +1084,21 @@ end:
 	BIO_free(in);
 	BIO_free_all(out);
 	EVP_PKEY_free(pkey);
-	if (genctx)
-		EVP_PKEY_CTX_free(genctx);
-	if (pkeyopts)
-		sk_OPENSSL_STRING_free(pkeyopts);
-#ifndef OPENSSL_NO_ENGINE
-	if (gen_eng)
-		ENGINE_free(gen_eng);
-#endif
-	if (keyalgstr)
-		OPENSSL_free(keyalgstr);
 	X509_REQ_free(req);
 	X509_free(x509ss);
 	ASN1_INTEGER_free(serial);
 	if(passargin && passin) OPENSSL_free(passin);
 	if(passargout && passout) OPENSSL_free(passout);
 	OBJ_cleanup();
+#ifndef OPENSSL_NO_DSA
+	if (dsa_params != NULL) DSA_free(dsa_params);
+#endif
 	apps_shutdown();
 	OPENSSL_EXIT(ex);
 	}
 
-static int make_REQ(X509_REQ *req, EVP_PKEY *pkey, char *subj, int multirdn,
-			int attribs, unsigned long chtype)
+static int make_REQ(X509_REQ *req, EVP_PKEY *pkey, char *subj, int attribs,
+			unsigned long chtype)
 	{
 	int ret=0,i;
 	char no_prompt = 0;
@@ -1151,7 +1148,7 @@ static int make_REQ(X509_REQ *req, EVP_PKEY *pkey, char *subj, int multirdn,
 	else 
 		{
 		if (subj)
-			i = build_subject(req, subj, chtype, multirdn);
+			i = build_subject(req, subj, chtype);
 		else
 			i = prompt_info(req, dn_sk, dn_sect, attr_sk, attr_sect, attribs, chtype);
 		}
@@ -1168,11 +1165,11 @@ err:
  * subject is expected to be in the format /type0=value0/type1=value1/type2=...
  * where characters may be escaped by \
  */
-static int build_subject(X509_REQ *req, char *subject, unsigned long chtype, int multirdn)
+static int build_subject(X509_REQ *req, char *subject, unsigned long chtype)
 	{
 	X509_NAME *n;
 
-	if (!(n = parse_name(subject, chtype, multirdn)))
+	if (!(n = do_subject(subject, chtype)))
 		return 0;
 
 	if (!X509_REQ_set_subject_name(req, n))
@@ -1193,10 +1190,9 @@ static int prompt_info(X509_REQ *req,
 	int i;
 	char *p,*q;
 	char buf[100];
-	int nid, mval;
+	int nid;
 	long n_min,n_max;
-	char *type, *value;
-	const char *def;
+	char *type,*def,*value;
 	CONF_VALUE *v;
 	X509_NAME *subj;
 	subj = X509_REQ_get_subject_name(req);
@@ -1237,17 +1233,10 @@ start:		for (;;)
 					if(*p) type = p;
 					break;
 				}
-			if (*type == '+')
-				{
-				mval = -1;
-				type++;
-				}
-			else
-				mval = 0;
 			/* If OBJ not recognised ignore it */
 			if ((nid=OBJ_txt2nid(type)) == NID_undef) goto start;
 			if (BIO_snprintf(buf,sizeof buf,"%s_default",v->name)
-				>= (int)sizeof(buf))
+				>= sizeof buf)
 			   {
 			   BIO_printf(bio_err,"Name '%s' too long\n",v->name);
 			   return 0;
@@ -1281,7 +1270,7 @@ start:		for (;;)
 				}
 
 			if (!add_DN_object(subj,v->value,def,value,nid,
-				n_min,n_max, chtype, mval))
+				n_min,n_max, chtype))
 				return 0;
 			}
 		if (X509_NAME_entry_count(subj) == 0)
@@ -1312,7 +1301,7 @@ start2:			for (;;)
 					goto start2;
 
 				if (BIO_snprintf(buf,sizeof buf,"%s_default",type)
-					>= (int)sizeof(buf))
+					>= sizeof buf)
 				   {
 				   BIO_printf(bio_err,"Name '%s' too long\n",v->name);
 				   return 0;
@@ -1336,17 +1325,11 @@ start2:			for (;;)
 
 				BIO_snprintf(buf,sizeof buf,"%s_min",type);
 				if (!NCONF_get_number(req_conf,attr_sect,buf, &n_min))
-					{
-					ERR_clear_error();
 					n_min = -1;
-					}
 
 				BIO_snprintf(buf,sizeof buf,"%s_max",type);
 				if (!NCONF_get_number(req_conf,attr_sect,buf, &n_max))
-					{
-					ERR_clear_error();
 					n_max = -1;
-					}
 
 				if (!add_attribute_object(req,
 					v->value,def,value,nid,n_min,n_max, chtype))
@@ -1377,7 +1360,6 @@ static int auto_info(X509_REQ *req, STACK_OF(CONF_VALUE) *dn_sk,
 
 	for (i = 0; i < sk_CONF_VALUE_num(dn_sk); i++)
 		{
-		int mval;
 		v=sk_CONF_VALUE_value(dn_sk,i);
 		p=q=NULL;
 		type=v->name;
@@ -1394,19 +1376,8 @@ static int auto_info(X509_REQ *req, STACK_OF(CONF_VALUE) *dn_sk,
 				if(*p) type = p;
 				break;
 			}
-#ifndef CHARSET_EBCDIC
-		if (*p == '+')
-#else
-		if (*p == os_toascii['+'])
-#endif
-			{
-			p++;
-			mval = -1;
-			}
-		else
-			mval = 0;
 		if (!X509_NAME_add_entry_by_txt(subj,type, chtype,
-				(unsigned char *) v->value,-1,-1,mval)) return 0;
+				(unsigned char *) v->value,-1,-1,0)) return 0;
 
 		}
 
@@ -1428,8 +1399,8 @@ static int auto_info(X509_REQ *req, STACK_OF(CONF_VALUE) *dn_sk,
 	}
 
 
-static int add_DN_object(X509_NAME *n, char *text, const char *def, char *value,
-	     int nid, int n_min, int n_max, unsigned long chtype, int mval)
+static int add_DN_object(X509_NAME *n, char *text, char *def, char *value,
+	     int nid, int n_min, int n_max, unsigned long chtype)
 	{
 	int i,ret=0;
 	MS_STATIC char buf[1024];
@@ -1447,8 +1418,7 @@ start:
 		buf[0]='\0';
 		if (!batch)
 			{
-			if (!fgets(buf,sizeof buf,stdin))
-				return 0;
+			fgets(buf,sizeof buf,stdin);
 			}
 		else
 			{
@@ -1479,14 +1449,14 @@ start:
 #endif
 	if(!req_check_len(i, n_min, n_max)) goto start;
 	if (!X509_NAME_add_entry_by_NID(n,nid, chtype,
-				(unsigned char *) buf, -1,-1,mval)) goto err;
+				(unsigned char *) buf, -1,-1,0)) goto err;
 	ret=1;
 err:
 	return(ret);
 	}
 
-static int add_attribute_object(X509_REQ *req, char *text, const char *def,
-				char *value, int nid, int n_min,
+static int add_attribute_object(X509_REQ *req, char *text,
+				char *def, char *value, int nid, int n_min,
 				int n_max, unsigned long chtype)
 	{
 	int i;
@@ -1506,8 +1476,7 @@ start:
 		buf[0]='\0';
 		if (!batch)
 			{
-			if (!fgets(buf,sizeof buf,stdin))
-				return 0;
+			fgets(buf,sizeof buf,stdin);
 			}
 		else
 			{
@@ -1550,6 +1519,23 @@ err:
 	return(0);
 	}
 
+#ifndef OPENSSL_NO_RSA
+static void MS_CALLBACK req_cb(int p, int n, void *arg)
+	{
+	char c='*';
+
+	if (p == 0) c='.';
+	if (p == 1) c='+';
+	if (p == 2) c='*';
+	if (p == 3) c='\n';
+	BIO_write((BIO *)arg,&c,1);
+	(void)BIO_flush((BIO *)arg);
+#ifdef LINT
+	p=n;
+#endif
+	}
+#endif
+
 static int req_check_len(int len, int n_min, int n_max)
 	{
 	if ((n_min > 0) && (len < n_min))
@@ -1566,193 +1552,13 @@ static int req_check_len(int len, int n_min, int n_max)
 	}
 
 /* Check if the end of a string matches 'end' */
-static int check_end(const char *str, const char *end)
+static int check_end(char *str, char *end)
 {
 	int elen, slen;	
-	const char *tmp;
+	char *tmp;
 	elen = strlen(end);
 	slen = strlen(str);
 	if(elen > slen) return 1;
 	tmp = str + slen - elen;
 	return strcmp(tmp, end);
 }
-
-static EVP_PKEY_CTX *set_keygen_ctx(BIO *err, const char *gstr, int *pkey_type,
-					long *pkeylen, char **palgnam,
-					ENGINE *keygen_engine)
-	{
-	EVP_PKEY_CTX *gctx = NULL;
-	EVP_PKEY *param = NULL;
-	long keylen = -1;
-	BIO *pbio = NULL;
-	const char *paramfile = NULL;
-
-	if (gstr == NULL)
-		{
-		*pkey_type = EVP_PKEY_RSA;
-		keylen = *pkeylen;
-		}
-	else if (gstr[0] >= '0' && gstr[0] <= '9')
-		{
-		*pkey_type = EVP_PKEY_RSA;
-		keylen = atol(gstr);
-		*pkeylen = keylen;
-		}
-	else if (!strncmp(gstr, "param:", 6))
-		paramfile = gstr + 6;
-	else
-		{
-		const char *p = strchr(gstr, ':');
-		int len;
-		ENGINE *tmpeng;
-		const EVP_PKEY_ASN1_METHOD *ameth;
-
-		if (p)
-			len = p - gstr;
-		else
-			len = strlen(gstr);
-		/* The lookup of a the string will cover all engines so
-		 * keep a note of the implementation.
-		 */
-
-		ameth = EVP_PKEY_asn1_find_str(&tmpeng, gstr, len);
-
-		if (!ameth)
-			{
-			BIO_printf(err, "Unknown algorithm %.*s\n", len, gstr);
-			return NULL;
-			}
-
-		EVP_PKEY_asn1_get0_info(NULL, pkey_type, NULL, NULL, NULL,
-									ameth);
-#ifndef OPENSSL_NO_ENGINE
-		if (tmpeng)
-			ENGINE_finish(tmpeng);
-#endif
-		if (*pkey_type == EVP_PKEY_RSA)
-			{
-			if (p)
-				{
-				keylen = atol(p + 1);
-				*pkeylen = keylen;
-				}
-			}
-		else if (p)
-			paramfile = p + 1;
-		}
-
-	if (paramfile)
-		{
-		pbio = BIO_new_file(paramfile, "r");
-		if (!pbio)
-			{
-			BIO_printf(err, "Can't open parameter file %s\n",
-					paramfile);
-			return NULL;
-			}
-		param = PEM_read_bio_Parameters(pbio, NULL);
-
-		if (!param)
-			{
-			X509 *x;
-			(void)BIO_reset(pbio);
-			x = PEM_read_bio_X509(pbio, NULL, NULL, NULL);
-			if (x)
-				{
-				param = X509_get_pubkey(x);
-				X509_free(x);
-				}
-			}
-
-		BIO_free(pbio);
-
-		if (!param)
-			{
-			BIO_printf(err, "Error reading parameter file %s\n",
-					paramfile);
-			return NULL;
-			}
-		if (*pkey_type == -1)
-			*pkey_type = EVP_PKEY_id(param);
-		else if (*pkey_type != EVP_PKEY_base_id(param))
-			{
-			BIO_printf(err, "Key Type does not match parameters\n");
-			EVP_PKEY_free(param);
-			return NULL;
-			}
-		}
-
-	if (palgnam)
-		{
-		const EVP_PKEY_ASN1_METHOD *ameth;
-		ENGINE *tmpeng;
-		const char *anam;
-		ameth = EVP_PKEY_asn1_find(&tmpeng, *pkey_type);
-		if (!ameth)
-			{
-			BIO_puts(err, "Internal error: can't find key algorithm\n");
-			return NULL;
-			}
-		EVP_PKEY_asn1_get0_info(NULL, NULL, NULL, NULL, &anam, ameth);
-		*palgnam = BUF_strdup(anam);
-#ifndef OPENSSL_NO_ENGINE
-		if (tmpeng)
-			ENGINE_finish(tmpeng);
-#endif
-		}
-
-	if (param)
-		{
-		gctx = EVP_PKEY_CTX_new(param, keygen_engine);
-		*pkeylen = EVP_PKEY_bits(param);
-		EVP_PKEY_free(param);
-		}
-	else
-		gctx = EVP_PKEY_CTX_new_id(*pkey_type, keygen_engine);
-
-	if (!gctx)
-		{
-		BIO_puts(err, "Error allocating keygen context\n");
-		ERR_print_errors(err);
-		return NULL;
-		}
-
-	if (EVP_PKEY_keygen_init(gctx) <= 0)
-		{
-		BIO_puts(err, "Error initializing keygen context\n");
-		ERR_print_errors(err);
-		return NULL;
-		}
-#ifndef OPENSSL_NO_RSA
-	if ((*pkey_type == EVP_PKEY_RSA) && (keylen != -1))
-		{
-		if (EVP_PKEY_CTX_set_rsa_keygen_bits(gctx, keylen) <= 0)
-			{
-			BIO_puts(err, "Error setting RSA keysize\n");
-			ERR_print_errors(err);
-			EVP_PKEY_CTX_free(gctx);
-			return NULL;
-			}
-		}
-#endif
-
-	return gctx;
-	}
-
-static int genpkey_cb(EVP_PKEY_CTX *ctx)
-	{
-	char c='*';
-	BIO *b = EVP_PKEY_CTX_get_app_data(ctx);
-	int p;
-	p = EVP_PKEY_CTX_get_keygen_info(ctx, 0);
-	if (p == 0) c='.';
-	if (p == 1) c='+';
-	if (p == 2) c='*';
-	if (p == 3) c='\n';
-	BIO_write(b,&c,1);
-	(void)BIO_flush(b);
-#ifdef LINT
-	p=n;
-#endif
-	return 1;
-	}

apps/rsa.c

@@ -56,7 +56,6 @@
  * [including the GNU Public Licence.]
  */
 
-#include <openssl/opensslconf.h>
 #ifndef OPENSSL_NO_RSA
 #include <stdio.h>
 #include <stdlib.h>
@@ -69,7 +68,6 @@
 #include <openssl/evp.h>
 #include <openssl/x509.h>
 #include <openssl/pem.h>
-#include <openssl/bn.h>
 
 #undef PROG
 #define PROG	rsa_main
@@ -81,13 +79,9 @@
  * -des		- encrypt output if PEM format with DES in cbc mode
  * -des3	- encrypt output if PEM format
  * -idea	- encrypt output if PEM format
- * -seed	- encrypt output if PEM format
  * -aes128	- encrypt output if PEM format
  * -aes192	- encrypt output if PEM format
  * -aes256	- encrypt output if PEM format
- * -camellia128 - encrypt output if PEM format
- * -camellia192 - encrypt output if PEM format
- * -camellia256 - encrypt output if PEM format
  * -text	- print a text version
  * -modulus	- print the RSA key modulus
  * -check	- verify key consistency
@@ -115,8 +109,6 @@ int MAIN(int argc, char **argv)
 #endif
 	int modulus=0;
 
-	int pvk_encr = 2;
-
 	apps_startup();
 
 	if (bio_err == NULL)
@@ -179,16 +171,6 @@ int MAIN(int argc, char **argv)
 			pubin=1;
 		else if (strcmp(*argv,"-pubout") == 0)
 			pubout=1;
-		else if (strcmp(*argv,"-RSAPublicKey_in") == 0)
-			pubin = 2;
-		else if (strcmp(*argv,"-RSAPublicKey_out") == 0)
-			pubout = 2;
-		else if (strcmp(*argv,"-pvk-strong") == 0)
-			pvk_encr=2;
-		else if (strcmp(*argv,"-pvk-weak") == 0)
-			pvk_encr=1;
-		else if (strcmp(*argv,"-pvk-none") == 0)
-			pvk_encr=0;
 		else if (strcmp(*argv,"-noout") == 0)
 			noout=1;
 		else if (strcmp(*argv,"-text") == 0)
@@ -224,16 +206,9 @@ bad:
 #ifndef OPENSSL_NO_IDEA
 		BIO_printf(bio_err," -idea           encrypt PEM output with cbc idea\n");
 #endif
-#ifndef OPENSSL_NO_SEED
-		BIO_printf(bio_err," -seed           encrypt PEM output with cbc seed\n");
-#endif
 #ifndef OPENSSL_NO_AES
 		BIO_printf(bio_err," -aes128, -aes192, -aes256\n");
 		BIO_printf(bio_err,"                 encrypt PEM output with cbc aes\n");
-#endif
-#ifndef OPENSSL_NO_CAMELLIA
-		BIO_printf(bio_err," -camellia128, -camellia192, -camellia256\n");
-		BIO_printf(bio_err,"                 encrypt PEM output with cbc camellia\n");
 #endif
 		BIO_printf(bio_err," -text           print the key in text\n");
 		BIO_printf(bio_err," -noout          don't print key out\n");
@@ -269,23 +244,10 @@ bad:
 		EVP_PKEY	*pkey;
 
 		if (pubin)
-			{
-			int tmpformat=-1;
-			if (pubin == 2)
-				{
-				if (informat == FORMAT_PEM)
-					tmpformat = FORMAT_PEMRSA;
-				else if (informat == FORMAT_ASN1)
-					tmpformat = FORMAT_ASN1RSA;
-				}
-			else if (informat == FORMAT_NETSCAPE && sgckey)
-				tmpformat = FORMAT_IISSGC;
-			else
-				tmpformat = informat;
-					
-			pkey = load_pubkey(bio_err, infile, tmpformat, 1,
+			pkey = load_pubkey(bio_err, infile,
+				(informat == FORMAT_NETSCAPE && sgckey ?
+					FORMAT_IISSGC : informat), 1,
 				passin, e, "Public Key");
-			}
 		else
 			pkey = load_key(bio_err, infile,
 				(informat == FORMAT_NETSCAPE && sgckey ?
@@ -293,7 +255,7 @@ bad:
 				passin, e, "Private Key");
 
 		if (pkey != NULL)
-			rsa = EVP_PKEY_get1_RSA(pkey);
+		rsa = pkey == NULL ? NULL : EVP_PKEY_get1_RSA(pkey);
 		EVP_PKEY_free(pkey);
 	}
 
@@ -345,7 +307,7 @@ bad:
 			BIO_printf(out,"RSA key ok\n");
 		else if (r == 0)
 			{
-			unsigned long err;
+			long err;
 
 			while ((err = ERR_peek_error()) != 0 &&
 				ERR_GET_LIB(err) == ERR_LIB_RSA &&
@@ -371,13 +333,7 @@ bad:
 		}
 	BIO_printf(bio_err,"writing RSA key\n");
 	if 	(outformat == FORMAT_ASN1) {
-		if(pubout || pubin) 
-			{
-			if (pubout == 2)
-				i=i2d_RSAPublicKey_bio(out,rsa);
-			else
-				i=i2d_RSA_PUBKEY_bio(out,rsa);
-			}
+		if(pubout || pubin) i=i2d_RSA_PUBKEY_bio(out,rsa);
 		else i=i2d_RSAPrivateKey_bio(out,rsa);
 	}
 #ifndef OPENSSL_NO_RC4
@@ -401,32 +357,14 @@ bad:
 #endif
 	else if (outformat == FORMAT_PEM) {
 		if(pubout || pubin)
-			{
-			if (pubout == 2)
-		    		i=PEM_write_bio_RSAPublicKey(out,rsa);
-			else
-		    		i=PEM_write_bio_RSA_PUBKEY(out,rsa);
-			}
+		    i=PEM_write_bio_RSA_PUBKEY(out,rsa);
 		else i=PEM_write_bio_RSAPrivateKey(out,rsa,
 						enc,NULL,0,NULL,passout);
-#if !defined(OPENSSL_NO_DSA) && !defined(OPENSSL_NO_RC4)
-	} else if (outformat == FORMAT_MSBLOB || outformat == FORMAT_PVK) {
-		EVP_PKEY *pk;
-		pk = EVP_PKEY_new();
-		EVP_PKEY_set1_RSA(pk, rsa);
-		if (outformat == FORMAT_PVK)
-			i = i2b_PVK_bio(out, pk, pvk_encr, 0, passout);
-		else if (pubin || pubout)
-			i = i2b_PublicKey_bio(out, pk);
-		else
-			i = i2b_PrivateKey_bio(out, pk);
-		EVP_PKEY_free(pk);
-#endif
 	} else	{
 		BIO_printf(bio_err,"bad output format specified for outfile\n");
 		goto end;
 		}
-	if (i <= 0)
+	if (!i)
 		{
 		BIO_printf(bio_err,"unable to write key\n");
 		ERR_print_errors(bio_err);

apps/rsautl.c

@@ -1,9 +1,9 @@
 /* rsautl.c */
-/* Written by Dr Stephen N Henson (steve@openssl.org) for the OpenSSL
+/* Written by Dr Stephen N Henson (shenson@bigfoot.com) for the OpenSSL
  * project 2000.
  */
 /* ====================================================================
- * Copyright (c) 2000 The OpenSSL Project.  All rights reserved.
+ * Copyright (c) 2000-2005 The OpenSSL Project.  All rights reserved.
  *
  * Redistribution and use in source and binary forms, with or without
  * modification, are permitted provided that the following conditions
@@ -56,14 +56,12 @@
  *
  */
 
-#include <openssl/opensslconf.h>
 #ifndef OPENSSL_NO_RSA
 
 #include "apps.h"
 #include <string.h>
 #include <openssl/err.h>
 #include <openssl/pem.h>
-#include <openssl/rsa.h>
 
 #define RSA_SIGN 	1
 #define RSA_VERIFY 	2
@@ -119,36 +117,24 @@ int MAIN(int argc, char **argv)
 	while(argc >= 1)
 	{
 		if (!strcmp(*argv,"-in")) {
-			if (--argc < 1)
-				badarg = 1;
-			else
-				infile= *(++argv);
+			if (--argc < 1) badarg = 1;
+                        infile= *(++argv);
 		} else if (!strcmp(*argv,"-out")) {
-			if (--argc < 1)
-				badarg = 1;
-			else
-				outfile= *(++argv);
+			if (--argc < 1) badarg = 1;
+			outfile= *(++argv);
 		} else if(!strcmp(*argv, "-inkey")) {
-			if (--argc < 1)
-				badarg = 1;
-			else
-				keyfile = *(++argv);
+			if (--argc < 1) badarg = 1;
+			keyfile = *(++argv);
 		} else if (!strcmp(*argv,"-passin")) {
-			if (--argc < 1)
-				badarg = 1;
-			else
-				passargin= *(++argv);
+			if (--argc < 1) badarg = 1;
+			passargin= *(++argv);
 		} else if (strcmp(*argv,"-keyform") == 0) {
-			if (--argc < 1)
-				badarg = 1;
-			else
-				keyform=str2fmt(*(++argv));
+			if (--argc < 1) badarg = 1;
+			keyform=str2fmt(*(++argv));
 #ifndef OPENSSL_NO_ENGINE
 		} else if(!strcmp(*argv, "-engine")) {
-			if (--argc < 1)
-				badarg = 1;
-			else
-				engine = *(++argv);
+			if (--argc < 1) badarg = 1;
+			engine = *(++argv);
 #endif
 		} else if(!strcmp(*argv, "-pubin")) {
 			key_type = KEY_PUBKEY;
@@ -342,10 +328,4 @@ static void usage()
 
 }
 
-#else /* !OPENSSL_NO_RSA */
-
-# if PEDANTIC
-static void *dummy=&dummy;
-# endif
-
 #endif

apps/s_apps.h

@@ -108,16 +108,15 @@
  * Hudson (tjh@cryptsoft.com).
  *
  */
-#if !defined(OPENSSL_SYS_NETWARE)  /* conflicts with winsock2 stuff on netware */
+
 #include <sys/types.h>
-#endif
 #include <openssl/opensslconf.h>
 
 #if defined(OPENSSL_SYS_WINDOWS) || defined(OPENSSL_SYS_MSDOS)
 #include <conio.h>
 #endif
 
-#if defined(OPENSSL_SYS_MSDOS) && !defined(_WIN32)
+#ifdef OPENSSL_SYS_MSDOS
 #define _kbhit kbhit
 #endif
 
@@ -148,29 +147,22 @@ typedef fd_mask fd_set;
 #define PORT_STR        "4433"
 #define PROTOCOL        "tcp"
 
-int do_server(int port, int type, int *ret, int (*cb) (char *hostname, int s, unsigned char *context), unsigned char *context);
+int do_server(int port, int *ret, int (*cb) (), char *context);
 #ifdef HEADER_X509_H
 int MS_CALLBACK verify_callback(int ok, X509_STORE_CTX *ctx);
 #endif
 #ifdef HEADER_SSL_H
 int set_cert_stuff(SSL_CTX *ctx, char *cert_file, char *key_file);
-int set_cert_key_stuff(SSL_CTX *ctx, X509 *cert, EVP_PKEY *key);
 #endif
-int init_client(int *sock, char *server, int port, int type);
+int init_client(int *sock, char *server, int port);
 int should_retry(int i);
 int extract_port(char *str, short *port_ptr);
 int extract_host_port(char *str,char **host_ptr,unsigned char *ip,short *p);
 
-long MS_CALLBACK bio_dump_callback(BIO *bio, int cmd, const char *argp,
-				   int argi, long argl, long ret);
+long MS_CALLBACK bio_dump_cb(BIO *bio, int cmd, const char *argp,
+	int argi, long argl, long ret);
 
 #ifdef HEADER_SSL_H
 void MS_CALLBACK apps_ssl_info_callback(const SSL *s, int where, int ret);
 void MS_CALLBACK msg_cb(int write_p, int version, int content_type, const void *buf, size_t len, SSL *ssl, void *arg);
-void MS_CALLBACK tlsext_cb(SSL *s, int client_server, int type,
-					unsigned char *data, int len,
-					void *arg);
 #endif
-
-int MS_CALLBACK generate_cookie_callback(SSL *ssl, unsigned char *cookie, unsigned int *cookie_len);
-int MS_CALLBACK verify_cookie_callback(SSL *ssl, unsigned char *cookie, unsigned int cookie_len);

apps/s_cb.c

@@ -56,7 +56,7 @@
  * [including the GNU Public Licence.]
  */
 /* ====================================================================
- * Copyright (c) 1998-2006 The OpenSSL Project.  All rights reserved.
+ * Copyright (c) 1998-2001 The OpenSSL Project.  All rights reserved.
  *
  * Redistribution and use in source and binary forms, with or without
  * modification, are permitted provided that the following conditions
@@ -117,21 +117,16 @@
 #undef NON_MAIN
 #undef USE_SOCKETS
 #include <openssl/err.h>
-#include <openssl/rand.h>
 #include <openssl/x509.h>
 #include <openssl/ssl.h>
 #include "s_apps.h"
 
-#define	COOKIE_SECRET_LENGTH	16
-
 int verify_depth=0;
 int verify_error=X509_V_OK;
-int verify_return_error=0;
-unsigned char cookie_secret[COOKIE_SECRET_LENGTH];
-int cookie_initialized=0;
 
 int MS_CALLBACK verify_callback(int ok, X509_STORE_CTX *ctx)
 	{
+	char buf[256];
 	X509 *err_cert;
 	int err,depth;
 
@@ -139,23 +134,15 @@ int MS_CALLBACK verify_callback(int ok, X509_STORE_CTX *ctx)
 	err=	X509_STORE_CTX_get_error(ctx);
 	depth=	X509_STORE_CTX_get_error_depth(ctx);
 
-	BIO_printf(bio_err,"depth=%d ",depth);
-	if (err_cert)
-		{
-		X509_NAME_print_ex(bio_err, X509_get_subject_name(err_cert),
-					0, XN_FLAG_ONELINE);
-		BIO_puts(bio_err, "\n");
-		}
-	else
-		BIO_puts(bio_err, "<no cert>\n");
+	X509_NAME_oneline(X509_get_subject_name(err_cert),buf,sizeof buf);
+	BIO_printf(bio_err,"depth=%d %s\n",depth,buf);
 	if (!ok)
 		{
 		BIO_printf(bio_err,"verify error:num=%d:%s\n",err,
 			X509_verify_cert_error_string(err));
 		if (verify_depth >= depth)
 			{
-			if (!verify_return_error)
-				ok=1;
+			ok=1;
 			verify_error=X509_V_OK;
 			}
 		else
@@ -164,33 +151,25 @@ int MS_CALLBACK verify_callback(int ok, X509_STORE_CTX *ctx)
 			verify_error=X509_V_ERR_CERT_CHAIN_TOO_LONG;
 			}
 		}
-	switch (err)
+	switch (ctx->error)
 		{
 	case X509_V_ERR_UNABLE_TO_GET_ISSUER_CERT:
-		BIO_puts(bio_err,"issuer= ");
-		X509_NAME_print_ex(bio_err, X509_get_issuer_name(err_cert),
-					0, XN_FLAG_ONELINE);
-		BIO_puts(bio_err, "\n");
+		X509_NAME_oneline(X509_get_issuer_name(ctx->current_cert),buf,sizeof buf);
+		BIO_printf(bio_err,"issuer= %s\n",buf);
 		break;
 	case X509_V_ERR_CERT_NOT_YET_VALID:
 	case X509_V_ERR_ERROR_IN_CERT_NOT_BEFORE_FIELD:
 		BIO_printf(bio_err,"notBefore=");
-		ASN1_TIME_print(bio_err,X509_get_notBefore(err_cert));
+		ASN1_TIME_print(bio_err,X509_get_notBefore(ctx->current_cert));
 		BIO_printf(bio_err,"\n");
 		break;
 	case X509_V_ERR_CERT_HAS_EXPIRED:
 	case X509_V_ERR_ERROR_IN_CERT_NOT_AFTER_FIELD:
 		BIO_printf(bio_err,"notAfter=");
-		ASN1_TIME_print(bio_err,X509_get_notAfter(err_cert));
+		ASN1_TIME_print(bio_err,X509_get_notAfter(ctx->current_cert));
 		BIO_printf(bio_err,"\n");
 		break;
-	case X509_V_ERR_NO_EXPLICIT_POLICY:
-		policies_print(bio_err, ctx);
-		break;
 		}
-	if (err == X509_V_OK && ok == 2)
-		policies_print(bio_err, ctx);
-
 	BIO_printf(bio_err,"verify return:%d\n",ok);
 	return(ok);
 	}
@@ -250,36 +229,8 @@ int set_cert_stuff(SSL_CTX *ctx, char *cert_file, char *key_file)
 	return(1);
 	}
 
-int set_cert_key_stuff(SSL_CTX *ctx, X509 *cert, EVP_PKEY *key)
-	{
-	if (cert ==  NULL)
-		return 1;
-	if (SSL_CTX_use_certificate(ctx,cert) <= 0)
-		{
-		BIO_printf(bio_err,"error setting certificate\n");
-		ERR_print_errors(bio_err);
-		return 0;
-		}
-	if (SSL_CTX_use_PrivateKey(ctx,key) <= 0)
-		{
-		BIO_printf(bio_err,"error setting private key\n");
-		ERR_print_errors(bio_err);
-		return 0;
-		}
-
-		
-		/* Now we know that a key and cert have been set against
-		 * the SSL context */
-	if (!SSL_CTX_check_private_key(ctx))
-		{
-		BIO_printf(bio_err,"Private key does not match the certificate public key\n");
-		return 0;
-		}
-	return 1;
-	}
-
-long MS_CALLBACK bio_dump_callback(BIO *bio, int cmd, const char *argp,
-				   int argi, long argl, long ret)
+long MS_CALLBACK bio_dump_cb(BIO *bio, int cmd, const char *argp, int argi,
+	     long argl, long ret)
 	{
 	BIO *out;
 
@@ -288,15 +239,15 @@ long MS_CALLBACK bio_dump_callback(BIO *bio, int cmd, const char *argp,
 
 	if (cmd == (BIO_CB_READ|BIO_CB_RETURN))
 		{
-		BIO_printf(out,"read from %p [%p] (%lu bytes => %ld (0x%lX))\n",
- 			(void *)bio,argp,(unsigned long)argi,ret,ret);
+		BIO_printf(out,"read from %08X [%08lX] (%d bytes => %ld (0x%X))\n",
+			bio,argp,argi,ret,ret);
 		BIO_dump(out,argp,(int)ret);
 		return(ret);
 		}
 	else if (cmd == (BIO_CB_WRITE|BIO_CB_RETURN))
 		{
-		BIO_printf(out,"write to %p [%p] (%lu bytes => %ld (0x%lX))\n",
-			(void *)bio,argp,(unsigned long)argi,ret,ret);
+		BIO_printf(out,"write to %08X [%08lX] (%d bytes => %ld (0x%X))\n",
+			bio,argp,argi,ret,ret);
 		BIO_dump(out,argp,(int)ret);
 		}
 	return(ret);
@@ -304,7 +255,7 @@ long MS_CALLBACK bio_dump_callback(BIO *bio, int cmd, const char *argp,
 
 void MS_CALLBACK apps_ssl_info_callback(const SSL *s, int where, int ret)
 	{
-	const char *str;
+	char *str;
 	int w;
 
 	w=where& ~SSL_ST_MASK;
@@ -357,12 +308,6 @@ void MS_CALLBACK msg_cb(int write_p, int version, int content_type, const void *
 	case TLS1_VERSION:
 		str_version = "TLS 1.0 ";
 		break;
-	case DTLS1_VERSION:
-		str_version = "DTLS 1.0 ";
-		break;
-	case DTLS1_BAD_VER:
-		str_version = "DTLS 1.0 (bad) ";
-		break;
 	default:
 		str_version = "???";
 		}
@@ -373,14 +318,14 @@ void MS_CALLBACK msg_cb(int write_p, int version, int content_type, const void *
 
 		if (len > 0)
 			{
-			switch (((const unsigned char*)buf)[0])
+			switch (((unsigned char*)buf)[0])
 				{
 				case 0:
 					str_details1 = ", ERROR:";
 					str_details2 = " ???";
 					if (len >= 3)
 						{
-						unsigned err = (((const unsigned char*)buf)[1]<<8) + ((const unsigned char*)buf)[2];
+						unsigned err = (((unsigned char*)buf)[1]<<8) + ((unsigned char*)buf)[2];
 						
 						switch (err)
 							{
@@ -428,10 +373,7 @@ void MS_CALLBACK msg_cb(int write_p, int version, int content_type, const void *
 			}
 		}
 
-	if (version == SSL3_VERSION ||
-	    version == TLS1_VERSION ||
-	    version == DTLS1_VERSION ||
-	    version == DTLS1_BAD_VER)
+	if (version == SSL3_VERSION || version == TLS1_VERSION)
 		{
 		switch (content_type)
 			{
@@ -452,7 +394,7 @@ void MS_CALLBACK msg_cb(int write_p, int version, int content_type, const void *
 			
 			if (len == 2)
 				{
-				switch (((const unsigned char*)buf)[0])
+				switch (((unsigned char*)buf)[0])
 					{
 				case 1:
 					str_details1 = ", warning";
@@ -463,7 +405,7 @@ void MS_CALLBACK msg_cb(int write_p, int version, int content_type, const void *
 					}
 
 				str_details2 = " ???";
-				switch (((const unsigned char*)buf)[1])
+				switch (((unsigned char*)buf)[1])
 					{
 				case 0:
 					str_details2 = " close_notify";
@@ -534,21 +476,6 @@ void MS_CALLBACK msg_cb(int write_p, int version, int content_type, const void *
 				case 100:
 					str_details2 = " no_renegotiation";
 					break;
-				case 110:
-					str_details2 = " unsupported_extension";
-					break;
-				case 111:
-					str_details2 = " certificate_unobtainable";
-					break;
-				case 112:
-					str_details2 = " unrecognized_name";
-					break;
-				case 113:
-					str_details2 = " bad_certificate_status_response";
-					break;
-				case 114:
-					str_details2 = " bad_certificate_hash_value";
-					break;
 					}
 				}
 			}
@@ -559,7 +486,7 @@ void MS_CALLBACK msg_cb(int write_p, int version, int content_type, const void *
 
 			if (len > 0)
 				{
-				switch (((const unsigned char*)buf)[0])
+				switch (((unsigned char*)buf)[0])
 					{
 				case 0:
 					str_details1 = ", HelloRequest";
@@ -570,9 +497,6 @@ void MS_CALLBACK msg_cb(int write_p, int version, int content_type, const void *
 				case 2:
 					str_details1 = ", ServerHello";
 					break;
-				case 3:
-					str_details1 = ", HelloVerifyRequest";
-					break;
 				case 11:
 					str_details1 = ", Certificate";
 					break;
@@ -615,248 +539,11 @@ void MS_CALLBACK msg_cb(int write_p, int version, int content_type, const void *
 			{
 			if (i % 16 == 0 && i > 0)
 				BIO_printf(bio, "\n   ");
-			BIO_printf(bio, " %02x", ((const unsigned char*)buf)[i]);
+			BIO_printf(bio, " %02x", ((unsigned char*)buf)[i]);
 			}
 		if (i < len)
 			BIO_printf(bio, " ...");
 		BIO_printf(bio, "\n");
 		}
-	(void)BIO_flush(bio);
-	}
-
-void MS_CALLBACK tlsext_cb(SSL *s, int client_server, int type,
-					unsigned char *data, int len,
-					void *arg)
-	{
-	BIO *bio = arg;
-	char *extname;
-
-	switch(type)
-		{
-		case TLSEXT_TYPE_server_name:
-		extname = "server name";
-		break;
-
-		case TLSEXT_TYPE_max_fragment_length:
-		extname = "max fragment length";
-		break;
-
-		case TLSEXT_TYPE_client_certificate_url:
-		extname = "client certificate URL";
-		break;
-
-		case TLSEXT_TYPE_trusted_ca_keys:
-		extname = "trusted CA keys";
-		break;
-
-		case TLSEXT_TYPE_truncated_hmac:
-		extname = "truncated HMAC";
-		break;
-
-		case TLSEXT_TYPE_status_request:
-		extname = "status request";
-		break;
-
-		case TLSEXT_TYPE_elliptic_curves:
-		extname = "elliptic curves";
-		break;
-
-		case TLSEXT_TYPE_ec_point_formats:
-		extname = "EC point formats";
-		break;
-
-		case TLSEXT_TYPE_session_ticket:
-		extname = "server ticket";
-		break;
-
-		case TLSEXT_TYPE_renegotiate:
-		extname = "renegotiate";
-		break;
-
-#ifdef TLSEXT_TYPE_opaque_prf_input
-		case TLSEXT_TYPE_opaque_prf_input:
-		extname = "opaque PRF input";
-		break;
-#endif
-
-		default:
-		extname = "unknown";
-		break;
-
-		}
-	
-	BIO_printf(bio, "TLS %s extension \"%s\" (id=%d), len=%d\n",
-			client_server ? "server": "client",
-			extname, type, len);
-	BIO_dump(bio, (char *)data, len);
-	(void)BIO_flush(bio);
-	}
-
-int MS_CALLBACK generate_cookie_callback(SSL *ssl, unsigned char *cookie, unsigned int *cookie_len)
-	{
-	unsigned char *buffer, result[EVP_MAX_MD_SIZE];
-	unsigned int length, resultlength;
-	union {
-		struct sockaddr sa;
-		struct sockaddr_in s4;
-#if OPENSSL_USE_IPV6
-		struct sockaddr_in6 s6;
-#endif
-	} peer;
-
-	/* Initialize a random secret */
-	if (!cookie_initialized)
-		{
-		if (!RAND_bytes(cookie_secret, COOKIE_SECRET_LENGTH))
-			{
-			BIO_printf(bio_err,"error setting random cookie secret\n");
-			return 0;
-			}
-		cookie_initialized = 1;
-		}
-
-	/* Read peer information */
-	(void)BIO_dgram_get_peer(SSL_get_rbio(ssl), &peer);
-
-	/* Create buffer with peer's address and port */
-	length = 0;
-	switch (peer.sa.sa_family)
-		{
-	case AF_INET:
-		length += sizeof(struct in_addr);
-		length += sizeof(peer.s4.sin_port);
-		break;
-#if OPENSSL_USE_IPV6
-	case AF_INET6:
-		length += sizeof(struct in6_addr);
-		length += sizeof(peer.s6.sin6_port);
-		break;
-#endif
-	default:
-		OPENSSL_assert(0);
-		break;
-		}
-	buffer = OPENSSL_malloc(length);
-
-	if (buffer == NULL)
-		{
-		BIO_printf(bio_err,"out of memory\n");
-		return 0;
-		}
-
-	switch (peer.sa.sa_family)
-		{
-	case AF_INET:
-		memcpy(buffer,
-		       &peer.s4.sin_port,
-		       sizeof(peer.s4.sin_port));
-		memcpy(buffer + sizeof(peer.s4.sin_port),
-		       &peer.s4.sin_addr,
-		       sizeof(struct in_addr));
-		break;
-#if OPENSSL_USE_IPV6
-	case AF_INET6:
-		memcpy(buffer,
-		       &peer.s6.sin6_port,
-		       sizeof(peer.s6.sin6_port));
-		memcpy(buffer + sizeof(peer.s6.sin6_port),
-		       &peer.s6.sin6_addr,
-		       sizeof(struct in6_addr));
-		break;
-#endif
-	default:
-		OPENSSL_assert(0);
-		break;
-		}
-
-	/* Calculate HMAC of buffer using the secret */
-	HMAC(EVP_sha1(), cookie_secret, COOKIE_SECRET_LENGTH,
-	     buffer, length, result, &resultlength);
-	OPENSSL_free(buffer);
-
-	memcpy(cookie, result, resultlength);
-	*cookie_len = resultlength;
-
-	return 1;
-	}
-
-int MS_CALLBACK verify_cookie_callback(SSL *ssl, unsigned char *cookie, unsigned int cookie_len)
-	{
-	unsigned char *buffer, result[EVP_MAX_MD_SIZE];
-	unsigned int length, resultlength;
-	union {
-		struct sockaddr sa;
-		struct sockaddr_in s4;
-#if OPENSSL_USE_IPV6
-		struct sockaddr_in6 s6;
-#endif
-	} peer;
-
-	/* If secret isn't initialized yet, the cookie can't be valid */
-	if (!cookie_initialized)
-		return 0;
-
-	/* Read peer information */
-	(void)BIO_dgram_get_peer(SSL_get_rbio(ssl), &peer);
-
-	/* Create buffer with peer's address and port */
-	length = 0;
-	switch (peer.sa.sa_family)
-		{
-	case AF_INET:
-		length += sizeof(struct in_addr);
-		length += sizeof(peer.s4.sin_port);
-		break;
-#if OPENSSL_USE_IPV6
-	case AF_INET6:
-		length += sizeof(struct in6_addr);
-		length += sizeof(peer.s6.sin6_port);
-		break;
-#endif
-	default:
-		OPENSSL_assert(0);
-		break;
-		}
-	buffer = OPENSSL_malloc(length);
-	
-	if (buffer == NULL)
-		{
-		BIO_printf(bio_err,"out of memory\n");
-		return 0;
-		}
-
-	switch (peer.sa.sa_family)
-		{
-	case AF_INET:
-		memcpy(buffer,
-		       &peer.s4.sin_port,
-		       sizeof(peer.s4.sin_port));
-		memcpy(buffer + sizeof(peer.s4.sin_port),
-		       &peer.s4.sin_addr,
-		       sizeof(struct in_addr));
-		break;
-#if OPENSSL_USE_IPV6
-	case AF_INET6:
-		memcpy(buffer,
-		       &peer.s6.sin6_port,
-		       sizeof(peer.s6.sin6_port));
-		memcpy(buffer + sizeof(peer.s6.sin6_port),
-		       &peer.s6.sin6_addr,
-		       sizeof(struct in6_addr));
-		break;
-#endif
-	default:
-		OPENSSL_assert(0);
-		break;
-		}
-
-	/* Calculate HMAC of buffer using the secret */
-	HMAC(EVP_sha1(), cookie_secret, COOKIE_SECRET_LENGTH,
-	     buffer, length, result, &resultlength);
-	OPENSSL_free(buffer);
-
-	if (cookie_len == resultlength && memcmp(result, cookie, resultlength) == 0)
-		return 1;
-
-	return 0;
+	BIO_flush(bio);
 	}

apps/s_socket.c

@@ -62,11 +62,7 @@
 #include <errno.h>
 #include <signal.h>
 
-#ifdef FLAT_INC
-#include "e_os2.h"
-#else
-#include "../e_os2.h"
-#endif
+#include <openssl/e_os2.h>
 
 /* With IPv6, it looks like Digital has mixed up the proper order of
    recursive header file inclusion, resulting in the compiler complaining
@@ -85,26 +81,14 @@ typedef unsigned int u_int;
 #include "s_apps.h"
 #include <openssl/ssl.h>
 
-#ifdef FLAT_INC
-#include "e_os.h"
-#else
-#include "../e_os.h"
-#endif
-
-#ifndef OPENSSL_NO_SOCK
-
-#if defined(OPENSSL_SYS_NETWARE) && defined(NETWARE_BSDSOCK)
-#include "netdb.h"
-#endif
-
 static struct hostent *GetHostByName(char *name);
-#if defined(OPENSSL_SYS_WINDOWS) || (defined(OPENSSL_SYS_NETWARE) && !defined(NETWARE_BSDSOCK))
+#ifdef OPENSSL_SYS_WINDOWS
 static void ssl_sock_cleanup(void);
 #endif
 static int ssl_sock_init(void);
-static int init_client_ip(int *sock,unsigned char ip[4], int port, int type);
-static int init_server(int *sock, int port, int type);
-static int init_server_long(int *sock, int port,char *ip, int type);
+static int init_client_ip(int *sock,unsigned char ip[4], int port);
+static int init_server(int *sock, int port);
+static int init_server_long(int *sock, int port,char *ip);
 static int do_accept(int acc_sock, int *sock, char **host);
 static int host_ip(char *str, unsigned char ip[4]);
 
@@ -114,10 +98,6 @@ static int host_ip(char *str, unsigned char ip[4]);
 #define SOCKET_PROTOCOL	IPPROTO_TCP
 #endif
 
-#if defined(OPENSSL_SYS_NETWARE) && !defined(NETWARE_BSDSOCK)
-static int wsa_init_done=0;
-#endif
-
 #ifdef OPENSSL_SYS_WINDOWS
 static struct WSAData wsa_state;
 static int wsa_init_done=0;
@@ -166,15 +146,6 @@ static void ssl_sock_cleanup(void)
 		WSACleanup();
 		}
 	}
-#elif defined(OPENSSL_SYS_NETWARE) && !defined(NETWARE_BSDSOCK)
-static void sock_cleanup(void)
-    {
-    if (wsa_init_done)
-        {
-        wsa_init_done=0;
-		WSACleanup();
-		}
-	}
 #endif
 
 static int ssl_sock_init(void)
@@ -209,43 +180,24 @@ static int ssl_sock_init(void)
 		SetWindowLong(topWnd,GWL_WNDPROC,(LONG)lpTopHookProc);
 #endif /* OPENSSL_SYS_WIN16 */
 		}
-#elif defined(OPENSSL_SYS_NETWARE) && !defined(NETWARE_BSDSOCK)
-   WORD wVerReq;
-   WSADATA wsaData;
-   int err;
-
-   if (!wsa_init_done)
-      {
-   
-# ifdef SIGINT
-      signal(SIGINT,(void (*)(int))sock_cleanup);
-# endif
-
-      wsa_init_done=1;
-      wVerReq = MAKEWORD( 2, 0 );
-      err = WSAStartup(wVerReq,&wsaData);
-      if (err != 0)
-         {
-         BIO_printf(bio_err,"unable to start WINSOCK2, error code=%d\n",err);
-         return(0);
-         }
-      }
 #endif /* OPENSSL_SYS_WINDOWS */
 	return(1);
 	}
 
-int init_client(int *sock, char *host, int port, int type)
+int init_client(int *sock, char *host, int port)
 	{
 	unsigned char ip[4];
+	short p=0;
 
 	if (!host_ip(host,&(ip[0])))
 		{
 		return(0);
 		}
-	return(init_client_ip(sock,ip,port,type));
+	if (p != 0) port=p;
+	return(init_client_ip(sock,ip,port));
 	}
 
-static int init_client_ip(int *sock, unsigned char ip[4], int port, int type)
+static int init_client_ip(int *sock, unsigned char ip[4], int port)
 	{
 	unsigned long addr;
 	struct sockaddr_in them;
@@ -263,58 +215,45 @@ static int init_client_ip(int *sock, unsigned char ip[4], int port, int type)
 		((unsigned long)ip[3]);
 	them.sin_addr.s_addr=htonl(addr);
 
-	if (type == SOCK_STREAM)
-		s=socket(AF_INET,SOCK_STREAM,SOCKET_PROTOCOL);
-	else /* ( type == SOCK_DGRAM) */
-		s=socket(AF_INET,SOCK_DGRAM,IPPROTO_UDP);
-			
+	s=socket(AF_INET,SOCK_STREAM,SOCKET_PROTOCOL);
 	if (s == INVALID_SOCKET) { perror("socket"); return(0); }
 
-#if defined(SO_KEEPALIVE) && !defined(OPENSSL_SYS_MPE)
-	if (type == SOCK_STREAM)
-		{
-		i=0;
-		i=setsockopt(s,SOL_SOCKET,SO_KEEPALIVE,(char *)&i,sizeof(i));
-		if (i < 0) { perror("keepalive"); return(0); }
-		}
+#ifndef OPENSSL_SYS_MPE
+	i=0;
+	i=setsockopt(s,SOL_SOCKET,SO_KEEPALIVE,(char *)&i,sizeof(i));
+	if (i < 0) { perror("keepalive"); return(0); }
 #endif
 
 	if (connect(s,(struct sockaddr *)&them,sizeof(them)) == -1)
-		{ closesocket(s); perror("connect"); return(0); }
+		{ close(s); perror("connect"); return(0); }
 	*sock=s;
 	return(1);
 	}
 
-int do_server(int port, int type, int *ret, int (*cb)(char *hostname, int s, unsigned char *context), unsigned char *context)
+int do_server(int port, int *ret, int (*cb)(), char *context)
 	{
 	int sock;
-	char *name = NULL;
-	int accept_socket = 0;
+	char *name;
+	int accept_socket;
 	int i;
 
-	if (!init_server(&accept_socket,port,type)) return(0);
+	if (!init_server(&accept_socket,port)) return(0);
 
 	if (ret != NULL)
 		{
 		*ret=accept_socket;
 		/* return(1);*/
 		}
-  	for (;;)
-  		{
-		if (type==SOCK_STREAM)
+	for (;;)
+		{
+		if (do_accept(accept_socket,&sock,&name) == 0)
 			{
-			if (do_accept(accept_socket,&sock,&name) == 0)
-				{
-				SHUTDOWN(accept_socket);
-				return(0);
-				}
+			SHUTDOWN(accept_socket);
+			return(0);
 			}
-		else
-			sock = accept_socket;
 		i=(*cb)(name,sock, context);
 		if (name != NULL) OPENSSL_free(name);
-		if (type==SOCK_STREAM)
-			SHUTDOWN2(sock);
+		SHUTDOWN2(sock);
 		if (i < 0)
 			{
 			SHUTDOWN2(accept_socket);
@@ -323,11 +262,11 @@ int do_server(int port, int type, int *ret, int (*cb)(char *hostname, int s, uns
 		}
 	}
 
-static int init_server_long(int *sock, int port, char *ip, int type)
+static int init_server_long(int *sock, int port, char *ip)
 	{
 	int ret=0;
 	struct sockaddr_in server;
-	int s= -1;
+	int s= -1,i;
 
 	if (!ssl_sock_init()) return(0);
 
@@ -343,11 +282,7 @@ static int init_server_long(int *sock, int port, char *ip, int type)
 #else
 		memcpy(&server.sin_addr,ip,4);
 #endif
-	
-		if (type == SOCK_STREAM)
-			s=socket(AF_INET,SOCK_STREAM,SOCKET_PROTOCOL);
-		else /* type == SOCK_DGRAM */
-			s=socket(AF_INET, SOCK_DGRAM,IPPROTO_UDP);
+	s=socket(AF_INET,SOCK_STREAM,SOCKET_PROTOCOL);
 
 	if (s == INVALID_SOCKET) goto err;
 #if defined SOL_SOCKET && defined SO_REUSEADDR
@@ -365,7 +300,8 @@ static int init_server_long(int *sock, int port, char *ip, int type)
 		goto err;
 		}
 	/* Make it 128 for linux */
-	if (type==SOCK_STREAM && listen(s,128) == -1) goto err;
+	if (listen(s,128) == -1) goto err;
+	i=0;
 	*sock=s;
 	ret=1;
 err:
@@ -376,14 +312,14 @@ err:
 	return(ret);
 	}
 
-static int init_server(int *sock, int port, int type)
+static int init_server(int *sock, int port)
 	{
-	return(init_server_long(sock, port, NULL, type));
+	return(init_server_long(sock, port, NULL));
 	}
 
 static int do_accept(int acc_sock, int *sock, char **host)
 	{
-	int ret;
+	int ret,i;
 	struct hostent *h1,*h2;
 	static struct sockaddr_in from;
 	int len;
@@ -405,8 +341,7 @@ redoit:
 	ret=accept(acc_sock,(struct sockaddr *)&from,(void *)&len);
 	if (ret == INVALID_SOCKET)
 		{
-#if defined(OPENSSL_SYS_WINDOWS) || (defined(OPENSSL_SYS_NETWARE) && !defined(NETWARE_BSDSOCK))
-		int i;
+#ifdef OPENSSL_SYS_WINDOWS
 		i=WSAGetLastError();
 		BIO_printf(bio_err,"accept error %d\n",i);
 #else
@@ -461,6 +396,7 @@ redoit:
 			BIO_printf(bio_err,"gethostbyname failure\n");
 			return(0);
 			}
+		i=0;
 		if (h2->h_addrtype != AF_INET)
 			{
 			BIO_printf(bio_err,"gethostbyname addr is not AF_INET\n");
@@ -616,5 +552,3 @@ static struct hostent *GetHostByName(char *name)
 		return(ret);
 		}
 	}
-
-#endif

apps/s_time.c

@@ -85,6 +85,54 @@
 #include OPENSSL_UNISTD
 #endif
 
+#if !defined(OPENSSL_SYS_MSDOS) && !defined(OPENSSL_SYS_VXWORKS) && (!defined(OPENSSL_SYS_VMS) || defined(__DECC))
+#define TIMES
+#endif
+
+#ifndef _IRIX
+#include <time.h>
+#endif
+#ifdef TIMES
+#include <sys/types.h>
+#include <sys/times.h>
+#endif
+
+/* Depending on the VMS version, the tms structure is perhaps defined.
+   The __TMS macro will show if it was.  If it wasn't defined, we should
+   undefine TIMES, since that tells the rest of the program how things
+   should be handled.				-- Richard Levitte */
+#if defined(OPENSSL_SYS_VMS_DECC) && !defined(__TMS)
+#undef TIMES
+#endif
+
+#if !defined(TIMES) && !defined(OPENSSL_SYS_VXWORKS)
+#include <sys/timeb.h>
+#endif
+
+#if defined(sun) || defined(__ultrix)
+#define _POSIX_SOURCE
+#include <limits.h>
+#include <sys/param.h>
+#endif
+
+/* The following if from times(3) man page.  It may need to be changed
+*/
+#ifndef HZ
+# ifdef _SC_CLK_TCK
+#  define HZ ((double)sysconf(_SC_CLK_TCK))
+# else
+#  ifndef CLK_TCK
+#   ifndef _BSD_CLK_TCK_ /* FreeBSD hack */
+#    define HZ	100.0
+#   else /* _BSD_CLK_TCK_ */
+#    define HZ ((double)_BSD_CLK_TCK_)
+#   endif
+#  else /* CLK_TCK */
+#   define HZ ((double)CLK_TCK)
+#  endif
+# endif
+#endif
+
 #undef PROG
 #define PROG s_time_main
 
@@ -129,7 +177,7 @@ static char *tm_cipher=NULL;
 static int tm_verify = SSL_VERIFY_NONE;
 static int maxTime = SECONDS;
 static SSL_CTX *tm_ctx=NULL;
-static const SSL_METHOD *s_time_meth=NULL;
+static SSL_METHOD *s_time_meth=NULL;
 static char *s_www_path=NULL;
 static long bytes_read=0; 
 static int st_bugs=0;
@@ -324,8 +372,49 @@ bad:
 
 static double tm_Time_F(int s)
 	{
-	return app_tminterval(s,1);
+	static double ret;
+#ifdef TIMES
+	static struct tms tstart,tend;
+
+	if(s == START) {
+		times(&tstart);
+		return(0);
+	} else {
+		times(&tend);
+		ret=((double)(tend.tms_utime-tstart.tms_utime))/HZ;
+		return((ret == 0.0)?1e-6:ret);
 	}
+#elif defined(OPENSSL_SYS_VXWORKS)
+        {
+	static unsigned long tick_start, tick_end;
+
+	if( s == START )
+		{
+		tick_start = tickGet();
+		return 0;
+		}
+	else
+		{
+		tick_end = tickGet();
+		ret = (double)(tick_end - tick_start) / (double)sysClkRateGet();
+		return((ret == 0.0)?1e-6:ret);
+		}
+        }
+#else /* !times() */
+	static struct timeb tstart,tend;
+	long i;
+
+	if(s == START) {
+		ftime(&tstart);
+		return(0);
+	} else {
+		ftime(&tend);
+		i=(long)tend.millitm-(long)tstart.millitm;
+		ret=((double)(tend.time-tstart.time))+((double)i)/1000.0;
+		return((ret == 0.0)?1e-6:ret);
+	}
+#endif
+}
 
 /***********************************************************************
  * MAIN - main processing area for client
@@ -601,7 +690,7 @@ static SSL *doConnection(SSL *scon)
 			i=SSL_get_fd(serverCon);
 			width=i+1;
 			FD_ZERO(&readfds);
-			openssl_fdset(i,&readfds);
+			FD_SET(i,&readfds);
 			/* Note: under VMS with SOCKETSHR the 2nd parameter
 			 * is currently of type (int *) whereas under other
 			 * systems it is (void *) if you don't have a cast it

apps/sess_id.c

@@ -69,7 +69,7 @@
 #undef PROG
 #define PROG	sess_id_main
 
-static const char *sess_id_usage[]={
+static char *sess_id_usage[]={
 "usage: sess_id args\n",
 "\n",
 " -inform arg     - input format - default PEM (DER or PEM)\n",
@@ -95,7 +95,7 @@ int MAIN(int argc, char **argv)
 	int informat,outformat;
 	char *infile=NULL,*outfile=NULL,*context=NULL;
 	int cert=0,noout=0,text=0;
-	const char **pp;
+	char **pp;
 
 	apps_startup();
 
@@ -241,7 +241,7 @@ bad:
 	if (!noout && !cert)
 		{
 		if 	(outformat == FORMAT_ASN1)
-			i=i2d_SSL_SESSION_bio(out,x);
+			i=(int)i2d_SSL_SESSION_bio(out,x);
 		else if (outformat == FORMAT_PEM)
 			i=PEM_write_bio_SSL_SESSION(out,x);
 		else	{

apps/smime.c

@@ -1,9 +1,9 @@
 /* smime.c */
-/* Written by Dr Stephen N Henson (steve@openssl.org) for the OpenSSL
- * project.
+/* Written by Dr Stephen N Henson (shenson@bigfoot.com) for the OpenSSL
+ * project 1999.
  */
 /* ====================================================================
- * Copyright (c) 1999-2004 The OpenSSL Project.  All rights reserved.
+ * Copyright (c) 1999 The OpenSSL Project.  All rights reserved.
  *
  * Redistribution and use in source and binary forms, with or without
  * modification, are permitted provided that the following conditions
@@ -64,36 +64,29 @@
 #include <openssl/crypto.h>
 #include <openssl/pem.h>
 #include <openssl/err.h>
-#include <openssl/x509_vfy.h>
-#include <openssl/x509v3.h>
 
 #undef PROG
 #define PROG smime_main
 static int save_certs(char *signerfile, STACK_OF(X509) *signers);
-static int smime_cb(int ok, X509_STORE_CTX *ctx);
 
 #define SMIME_OP	0x10
-#define SMIME_IP	0x20
-#define SMIME_SIGNERS	0x40
 #define SMIME_ENCRYPT	(1 | SMIME_OP)
-#define SMIME_DECRYPT	(2 | SMIME_IP)
-#define SMIME_SIGN	(3 | SMIME_OP | SMIME_SIGNERS)
-#define SMIME_VERIFY	(4 | SMIME_IP)
-#define SMIME_PK7OUT	(5 | SMIME_IP | SMIME_OP)
-#define SMIME_RESIGN	(6 | SMIME_IP | SMIME_OP | SMIME_SIGNERS)
+#define SMIME_DECRYPT	2
+#define SMIME_SIGN	(3 | SMIME_OP)
+#define SMIME_VERIFY	4
+#define SMIME_PK7OUT	5
 
 int MAIN(int, char **);
 
 int MAIN(int argc, char **argv)
-	{
+{
 	ENGINE *e = NULL;
 	int operation = 0;
 	int ret = 0;
 	char **args;
-	const char *inmode = "r", *outmode = "w";
+	char *inmode = "r", *outmode = "w";
 	char *infile = NULL, *outfile = NULL;
 	char *signerfile = NULL, *recipfile = NULL;
-	STACK_OF(OPENSSL_STRING) *sksigners = NULL, *skkeys = NULL;
 	char *certfile = NULL, *keyfile = NULL, *contfile=NULL;
 	const EVP_CIPHER *cipher = NULL;
 	PKCS7 *p7 = NULL;
@@ -103,60 +96,42 @@ int MAIN(int argc, char **argv)
 	STACK_OF(X509) *encerts = NULL, *other = NULL;
 	BIO *in = NULL, *out = NULL, *indata = NULL;
 	int badarg = 0;
-	int flags = PKCS7_DETACHED;
+	int flags = PKCS7_DETACHED, store_flags = 0;
 	char *to = NULL, *from = NULL, *subject = NULL;
 	char *CAfile = NULL, *CApath = NULL;
 	char *passargin = NULL, *passin = NULL;
 	char *inrand = NULL;
 	int need_rand = 0;
-	int indef = 0;
-	const EVP_MD *sign_md = NULL;
 	int informat = FORMAT_SMIME, outformat = FORMAT_SMIME;
         int keyform = FORMAT_PEM;
 #ifndef OPENSSL_NO_ENGINE
 	char *engine=NULL;
 #endif
 
-	X509_VERIFY_PARAM *vpm = NULL;
-
 	args = argv + 1;
 	ret = 1;
 
 	apps_startup();
 
 	if (bio_err == NULL)
-		{
 		if ((bio_err = BIO_new(BIO_s_file())) != NULL)
 			BIO_set_fp(bio_err, stderr, BIO_NOCLOSE|BIO_FP_TEXT);
-		}
 
 	if (!load_config(bio_err, NULL))
 		goto end;
 
-	while (!badarg && *args && *args[0] == '-')
-		{
-		if (!strcmp (*args, "-encrypt"))
-			operation = SMIME_ENCRYPT;
-		else if (!strcmp (*args, "-decrypt"))
-			operation = SMIME_DECRYPT;
-		else if (!strcmp (*args, "-sign"))
-			operation = SMIME_SIGN;
-		else if (!strcmp (*args, "-resign"))
-			operation = SMIME_RESIGN;
-		else if (!strcmp (*args, "-verify"))
-			operation = SMIME_VERIFY;
-		else if (!strcmp (*args, "-pk7out"))
-			operation = SMIME_PK7OUT;
+	while (!badarg && *args && *args[0] == '-') {
+		if (!strcmp (*args, "-encrypt")) operation = SMIME_ENCRYPT;
+		else if (!strcmp (*args, "-decrypt")) operation = SMIME_DECRYPT;
+		else if (!strcmp (*args, "-sign")) operation = SMIME_SIGN;
+		else if (!strcmp (*args, "-verify")) operation = SMIME_VERIFY;
+		else if (!strcmp (*args, "-pk7out")) operation = SMIME_PK7OUT;
 #ifndef OPENSSL_NO_DES
 		else if (!strcmp (*args, "-des3")) 
 				cipher = EVP_des_ede3_cbc();
 		else if (!strcmp (*args, "-des")) 
 				cipher = EVP_des_cbc();
 #endif
-#ifndef OPENSSL_NO_SEED
-		else if (!strcmp (*args, "-seed")) 
-				cipher = EVP_seed_cbc();
-#endif
 #ifndef OPENSSL_NO_RC2
 		else if (!strcmp (*args, "-rc2-40")) 
 				cipher = EVP_rc2_40_cbc();
@@ -172,14 +147,6 @@ int MAIN(int argc, char **argv)
 				cipher = EVP_aes_192_cbc();
 		else if (!strcmp(*args,"-aes256"))
 				cipher = EVP_aes_256_cbc();
-#endif
-#ifndef OPENSSL_NO_CAMELLIA
-		else if (!strcmp(*args,"-camellia128"))
-				cipher = EVP_camellia_128_cbc();
-		else if (!strcmp(*args,"-camellia192"))
-				cipher = EVP_camellia_192_cbc();
-		else if (!strcmp(*args,"-camellia256"))
-				cipher = EVP_camellia_256_cbc();
 #endif
 		else if (!strcmp (*args, "-text")) 
 				flags |= PKCS7_TEXT;
@@ -201,234 +168,131 @@ int MAIN(int argc, char **argv)
 				flags |= PKCS7_BINARY;
 		else if (!strcmp (*args, "-nosigs"))
 				flags |= PKCS7_NOSIGS;
-		else if (!strcmp (*args, "-stream"))
-				indef = 1;
-		else if (!strcmp (*args, "-indef"))
-				indef = 1;
-		else if (!strcmp (*args, "-noindef"))
-				indef = 0;
 		else if (!strcmp (*args, "-nooldmime"))
 				flags |= PKCS7_NOOLDMIMETYPE;
 		else if (!strcmp (*args, "-crlfeol"))
 				flags |= PKCS7_CRLFEOL;
-		else if (!strcmp(*args,"-rand"))
-			{
-			if (!args[1])
-				goto argerr;
-			args++;
-			inrand = *args;
+		else if (!strcmp (*args, "-crl_check"))
+				store_flags |= X509_V_FLAG_CRL_CHECK;
+		else if (!strcmp (*args, "-crl_check_all"))
+				store_flags |= X509_V_FLAG_CRL_CHECK|X509_V_FLAG_CRL_CHECK_ALL;
+		else if (!strcmp(*args,"-rand")) {
+			if (args[1]) {
+				args++;
+				inrand = *args;
+			} else badarg = 1;
 			need_rand = 1;
-			}
 #ifndef OPENSSL_NO_ENGINE
-		else if (!strcmp(*args,"-engine"))
-			{
-			if (!args[1])
-				goto argerr;
-			engine = *++args;
-			}
+		} else if (!strcmp(*args,"-engine")) {
+			if (args[1]) {
+				args++;
+				engine = *args;
+			} else badarg = 1;
 #endif
-		else if (!strcmp(*args,"-passin"))
-			{
-			if (!args[1])
-				goto argerr;
-			passargin = *++args;
-			}
-		else if (!strcmp (*args, "-to"))
-			{
-			if (!args[1])
-				goto argerr;
-			to = *++args;
-			}
-		else if (!strcmp (*args, "-from"))
-			{
-			if (!args[1])
-				goto argerr;
-			from = *++args;
-			}
-		else if (!strcmp (*args, "-subject"))
-			{
-			if (!args[1])
-				goto argerr;
-			subject = *++args;
-			}
-		else if (!strcmp (*args, "-signer"))
-			{
-			if (!args[1])
-				goto argerr;
-			/* If previous -signer argument add signer to list */
-
-			if (signerfile)
-				{
-				if (!sksigners)
-					sksigners = sk_OPENSSL_STRING_new_null();
-				sk_OPENSSL_STRING_push(sksigners, signerfile);
-				if (!keyfile)
-					keyfile = signerfile;
-				if (!skkeys)
-					skkeys = sk_OPENSSL_STRING_new_null();
-				sk_OPENSSL_STRING_push(skkeys, keyfile);
-				keyfile = NULL;
-				}
-			signerfile = *++args;
-			}
-		else if (!strcmp (*args, "-recip"))
-			{
-			if (!args[1])
-				goto argerr;
-			recipfile = *++args;
-			}
-		else if (!strcmp (*args, "-md"))
-			{
-			if (!args[1])
-				goto argerr;
-			sign_md = EVP_get_digestbyname(*++args);
-			if (sign_md == NULL)
-				{
-				BIO_printf(bio_err, "Unknown digest %s\n",
-							*args);
-				goto argerr;
-				}
-			}
-		else if (!strcmp (*args, "-inkey"))
-			{
-			if (!args[1])	
-				goto argerr;
-			/* If previous -inkey arument add signer to list */
-			if (keyfile)
-				{
-				if (!signerfile)
-					{
-					BIO_puts(bio_err, "Illegal -inkey without -signer\n");
-					goto argerr;
-					}
-				if (!sksigners)
-					sksigners = sk_OPENSSL_STRING_new_null();
-				sk_OPENSSL_STRING_push(sksigners, signerfile);
-				signerfile = NULL;
-				if (!skkeys)
-					skkeys = sk_OPENSSL_STRING_new_null();
-				sk_OPENSSL_STRING_push(skkeys, keyfile);
-				}
-			keyfile = *++args;
-			}
-		else if (!strcmp (*args, "-keyform"))
-			{
-			if (!args[1])
-				goto argerr;
-			keyform = str2fmt(*++args);
-			}
-		else if (!strcmp (*args, "-certfile"))
-			{
-			if (!args[1])
-				goto argerr;
-			certfile = *++args;
-			}
-		else if (!strcmp (*args, "-CAfile"))
-			{
-			if (!args[1])
-				goto argerr;
-			CAfile = *++args;
-			}
-		else if (!strcmp (*args, "-CApath"))
-			{
-			if (!args[1])
-				goto argerr;
-			CApath = *++args;
-			}
-		else if (!strcmp (*args, "-in"))
-			{
-			if (!args[1])
-				goto argerr;
-			infile = *++args;
-			}
-		else if (!strcmp (*args, "-inform"))
-			{
-			if (!args[1])
-				goto argerr;
-			informat = str2fmt(*++args);
-			}
-		else if (!strcmp (*args, "-outform"))
-			{
-			if (!args[1])
-				goto argerr;
-			outformat = str2fmt(*++args);
-			}
-		else if (!strcmp (*args, "-out"))
-			{
-			if (!args[1])
-				goto argerr;
-			outfile = *++args;
-			}
-		else if (!strcmp (*args, "-content"))
-			{
-			if (!args[1])
-				goto argerr;
-			contfile = *++args;
-			}
-		else if (args_verify(&args, NULL, &badarg, bio_err, &vpm))
-			continue;
-		else if ((cipher = EVP_get_cipherbyname(*args + 1)) == NULL)
-			badarg = 1;
+		} else if (!strcmp(*args,"-passin")) {
+			if (args[1]) {
+				args++;
+				passargin = *args;
+			} else badarg = 1;
+		} else if (!strcmp (*args, "-to")) {
+			if (args[1]) {
+				args++;
+				to = *args;
+			} else badarg = 1;
+		} else if (!strcmp (*args, "-from")) {
+			if (args[1]) {
+				args++;
+				from = *args;
+			} else badarg = 1;
+		} else if (!strcmp (*args, "-subject")) {
+			if (args[1]) {
+				args++;
+				subject = *args;
+			} else badarg = 1;
+		} else if (!strcmp (*args, "-signer")) {
+			if (args[1]) {
+				args++;
+				signerfile = *args;
+			} else badarg = 1;
+		} else if (!strcmp (*args, "-recip")) {
+			if (args[1]) {
+				args++;
+				recipfile = *args;
+			} else badarg = 1;
+		} else if (!strcmp (*args, "-inkey")) {
+			if (args[1]) {
+				args++;
+				keyfile = *args;
+			} else badarg = 1;
+		} else if (!strcmp (*args, "-keyform")) {
+			if (args[1]) {
+				args++;
+				keyform = str2fmt(*args);
+			} else badarg = 1;
+		} else if (!strcmp (*args, "-certfile")) {
+			if (args[1]) {
+				args++;
+				certfile = *args;
+			} else badarg = 1;
+		} else if (!strcmp (*args, "-CAfile")) {
+			if (args[1]) {
+				args++;
+				CAfile = *args;
+			} else badarg = 1;
+		} else if (!strcmp (*args, "-CApath")) {
+			if (args[1]) {
+				args++;
+				CApath = *args;
+			} else badarg = 1;
+		} else if (!strcmp (*args, "-in")) {
+			if (args[1]) {
+				args++;
+				infile = *args;
+			} else badarg = 1;
+		} else if (!strcmp (*args, "-inform")) {
+			if (args[1]) {
+				args++;
+				informat = str2fmt(*args);
+			} else badarg = 1;
+		} else if (!strcmp (*args, "-outform")) {
+			if (args[1]) {
+				args++;
+				outformat = str2fmt(*args);
+			} else badarg = 1;
+		} else if (!strcmp (*args, "-out")) {
+			if (args[1]) {
+				args++;
+				outfile = *args;
+			} else badarg = 1;
+		} else if (!strcmp (*args, "-content")) {
+			if (args[1]) {
+				args++;
+				contfile = *args;
+			} else badarg = 1;
+		} else badarg = 1;
 		args++;
-		}
+	}
 
-	if (!(operation & SMIME_SIGNERS) && (skkeys || sksigners))
-		{
-		BIO_puts(bio_err, "Multiple signers or keys not allowed\n");
-		goto argerr;
-		}
-
-	if (operation & SMIME_SIGNERS)
-		{
-		/* Check to see if any final signer needs to be appended */
-		if (keyfile && !signerfile)
-			{
-			BIO_puts(bio_err, "Illegal -inkey without -signer\n");
-			goto argerr;
-			}
-		if (signerfile)
-			{
-			if (!sksigners)
-				sksigners = sk_OPENSSL_STRING_new_null();
-			sk_OPENSSL_STRING_push(sksigners, signerfile);
-			if (!skkeys)
-				skkeys = sk_OPENSSL_STRING_new_null();
-			if (!keyfile)
-				keyfile = signerfile;
-			sk_OPENSSL_STRING_push(skkeys, keyfile);
-			}
-		if (!sksigners)
-			{
+	if(operation == SMIME_SIGN) {
+		if(!signerfile) {
 			BIO_printf(bio_err, "No signer certificate specified\n");
 			badarg = 1;
-			}
-		signerfile = NULL;
-		keyfile = NULL;
+		}
 		need_rand = 1;
-		}
-	else if (operation == SMIME_DECRYPT)
-		{
-		if (!recipfile && !keyfile)
-			{
-			BIO_printf(bio_err, "No recipient certificate or key specified\n");
+	} else if(operation == SMIME_DECRYPT) {
+		if(!recipfile) {
+			BIO_printf(bio_err, "No recipient certificate and key specified\n");
 			badarg = 1;
-			}
 		}
-	else if (operation == SMIME_ENCRYPT)
-		{
-		if (!*args)
-			{
+	} else if(operation == SMIME_ENCRYPT) {
+		if(!*args) {
 			BIO_printf(bio_err, "No recipient(s) certificate(s) specified\n");
 			badarg = 1;
-			}
-		need_rand = 1;
 		}
-	else if (!operation)
-		badarg = 1;
+		need_rand = 1;
+	} else if(!operation) badarg = 1;
 
-	if (badarg)
-		{
-		argerr:
+	if (badarg) {
 		BIO_printf (bio_err, "Usage smime [options] cert.pem ...\n");
 		BIO_printf (bio_err, "where options are\n");
 		BIO_printf (bio_err, "-encrypt       encrypt message\n");
@@ -440,9 +304,6 @@ int MAIN(int argc, char **argv)
 		BIO_printf (bio_err, "-des3          encrypt with triple DES\n");
 		BIO_printf (bio_err, "-des           encrypt with DES\n");
 #endif
-#ifndef OPENSSL_NO_SEED
-		BIO_printf (bio_err, "-seed          encrypt with SEED\n");
-#endif
 #ifndef OPENSSL_NO_RC2
 		BIO_printf (bio_err, "-rc2-40        encrypt with RC2-40 (default)\n");
 		BIO_printf (bio_err, "-rc2-64        encrypt with RC2-64\n");
@@ -451,10 +312,6 @@ int MAIN(int argc, char **argv)
 #ifndef OPENSSL_NO_AES
 		BIO_printf (bio_err, "-aes128, -aes192, -aes256\n");
 		BIO_printf (bio_err, "               encrypt PEM output with cbc aes\n");
-#endif
-#ifndef OPENSSL_NO_CAMELLIA
-		BIO_printf (bio_err, "-camellia128, -camellia192, -camellia256\n");
-		BIO_printf (bio_err, "               encrypt PEM output with cbc camellia\n");
 #endif
 		BIO_printf (bio_err, "-nointern      don't search certificates in message for signer\n");
 		BIO_printf (bio_err, "-nosigs        don't verify message signature\n");
@@ -490,174 +347,121 @@ int MAIN(int argc, char **argv)
 		BIO_printf(bio_err,  "               the random number generator\n");
 		BIO_printf (bio_err, "cert.pem       recipient certificate(s) for encryption\n");
 		goto end;
-		}
+	}
 
 #ifndef OPENSSL_NO_ENGINE
         e = setup_engine(bio_err, engine, 0);
 #endif
 
-	if (!app_passwd(bio_err, passargin, NULL, &passin, NULL))
-		{
+	if(!app_passwd(bio_err, passargin, NULL, &passin, NULL)) {
 		BIO_printf(bio_err, "Error getting password\n");
 		goto end;
-		}
+	}
 
-	if (need_rand)
-		{
+	if (need_rand) {
 		app_RAND_load_file(NULL, bio_err, (inrand != NULL));
 		if (inrand != NULL)
 			BIO_printf(bio_err,"%ld semi-random bytes loaded\n",
 				app_RAND_load_files(inrand));
-		}
+	}
 
 	ret = 2;
 
-	if (!(operation & SMIME_SIGNERS))
-		flags &= ~PKCS7_DETACHED;
+	if(operation != SMIME_SIGN) flags &= ~PKCS7_DETACHED;
 
-	if (operation & SMIME_OP)
-		{
-		if (outformat == FORMAT_ASN1)
-			outmode = "wb";
-		}
-	else
-		{
-		if (flags & PKCS7_BINARY)
-			outmode = "wb";
-		}
+	if(operation & SMIME_OP) {
+		if(flags & PKCS7_BINARY) inmode = "rb";
+		if(outformat == FORMAT_ASN1) outmode = "wb";
+	} else {
+		if(flags & PKCS7_BINARY) outmode = "wb";
+		if(informat == FORMAT_ASN1) inmode = "rb";
+	}
 
-	if (operation & SMIME_IP)
-		{
-		if (informat == FORMAT_ASN1)
-			inmode = "rb";
-		}
-	else
-		{
-		if (flags & PKCS7_BINARY)
-			inmode = "rb";
-		}
-
-	if (operation == SMIME_ENCRYPT)
-		{
-		if (!cipher)
-			{
+	if(operation == SMIME_ENCRYPT) {
+		if (!cipher) {
 #ifndef OPENSSL_NO_RC2			
 			cipher = EVP_rc2_40_cbc();
 #else
 			BIO_printf(bio_err, "No cipher selected\n");
 			goto end;
 #endif
-			}
+		}
 		encerts = sk_X509_new_null();
-		while (*args)
-			{
-			if (!(cert = load_cert(bio_err,*args,FORMAT_PEM,
-				NULL, e, "recipient certificate file")))
-				{
+		while (*args) {
+			if(!(cert = load_cert(bio_err,*args,FORMAT_PEM,
+				NULL, e, "recipient certificate file"))) {
 #if 0				/* An appropriate message is already printed */
 				BIO_printf(bio_err, "Can't read recipient certificate file %s\n", *args);
 #endif
 				goto end;
-				}
+			}
 			sk_X509_push(encerts, cert);
 			cert = NULL;
 			args++;
-			}
 		}
+	}
 
-	if (certfile)
-		{
-		if (!(other = load_certs(bio_err,certfile,FORMAT_PEM, NULL,
-			e, "certificate file")))
-			{
+	if(signerfile && (operation == SMIME_SIGN)) {
+		if(!(signer = load_cert(bio_err,signerfile,FORMAT_PEM, NULL,
+			e, "signer certificate"))) {
+#if 0			/* An appropri message has already been printed */
+			BIO_printf(bio_err, "Can't read signer certificate file %s\n", signerfile);
+#endif
+			goto end;
+		}
+	}
+
+	if(certfile) {
+		if(!(other = load_certs(bio_err,certfile,FORMAT_PEM, NULL,
+			e, "certificate file"))) {
+#if 0			/* An appropriate message has already been printed */
+			BIO_printf(bio_err, "Can't read certificate file %s\n", certfile);
+#endif
 			ERR_print_errors(bio_err);
 			goto end;
-			}
 		}
+	}
 
-	if (recipfile && (operation == SMIME_DECRYPT))
-		{
-		if (!(recip = load_cert(bio_err,recipfile,FORMAT_PEM,NULL,
-			e, "recipient certificate file")))
-			{
+	if(recipfile && (operation == SMIME_DECRYPT)) {
+		if(!(recip = load_cert(bio_err,recipfile,FORMAT_PEM,NULL,
+			e, "recipient certificate file"))) {
+#if 0			/* An appropriate message has alrady been printed */
+			BIO_printf(bio_err, "Can't read recipient certificate file %s\n", recipfile);
+#endif
 			ERR_print_errors(bio_err);
 			goto end;
-			}
 		}
+	}
 
-	if (operation == SMIME_DECRYPT)
-		{
-		if (!keyfile)
-			keyfile = recipfile;
-		}
-	else if (operation == SMIME_SIGN)
-		{
-		if (!keyfile)
-			keyfile = signerfile;
-		}
-	else keyfile = NULL;
+	if(operation == SMIME_DECRYPT) {
+		if(!keyfile) keyfile = recipfile;
+	} else if(operation == SMIME_SIGN) {
+		if(!keyfile) keyfile = signerfile;
+	} else keyfile = NULL;
 
-	if (keyfile)
-		{
+	if(keyfile) {
 		key = load_key(bio_err, keyfile, keyform, 0, passin, e,
 			       "signing key file");
-		if (!key)
+		if (!key) {
 			goto end;
-		}
+                }
+	}
 
-	if (infile)
-		{
-		if (!(in = BIO_new_file(infile, inmode)))
-			{
+	if (infile) {
+		if (!(in = BIO_new_file(infile, inmode))) {
 			BIO_printf (bio_err,
 				 "Can't open input file %s\n", infile);
 			goto end;
-			}
 		}
-	else
-		in = BIO_new_fp(stdin, BIO_NOCLOSE);
+	} else in = BIO_new_fp(stdin, BIO_NOCLOSE);
 
-	if (operation & SMIME_IP)
-		{
-		if (informat == FORMAT_SMIME) 
-			p7 = SMIME_read_PKCS7(in, &indata);
-		else if (informat == FORMAT_PEM) 
-			p7 = PEM_read_bio_PKCS7(in, NULL, NULL, NULL);
-		else if (informat == FORMAT_ASN1) 
-			p7 = d2i_PKCS7_bio(in, NULL);
-		else
-			{
-			BIO_printf(bio_err, "Bad input format for PKCS#7 file\n");
-			goto end;
-			}
-
-		if (!p7)
-			{
-			BIO_printf(bio_err, "Error reading S/MIME message\n");
-			goto end;
-			}
-		if (contfile)
-			{
-			BIO_free(indata);
-			if (!(indata = BIO_new_file(contfile, "rb")))
-				{
-				BIO_printf(bio_err, "Can't read content file %s\n", contfile);
-				goto end;
-				}
-			}
-		}
-
-	if (outfile)
-		{
-		if (!(out = BIO_new_file(outfile, outmode)))
-			{
+	if (outfile) {
+		if (!(out = BIO_new_file(outfile, outmode))) {
 			BIO_printf (bio_err,
 				 "Can't open output file %s\n", outfile);
 			goto end;
-			}
 		}
-	else
-		{
+	} else {
 		out = BIO_new_fp(stdout, BIO_NOCLOSE);
 #ifdef OPENSSL_SYS_VMS
 		{
@@ -665,151 +469,101 @@ int MAIN(int argc, char **argv)
 		    out = BIO_push(tmpbio, out);
 		}
 #endif
-		}
+	}
 
-	if (operation == SMIME_VERIFY)
-		{
-		if (!(store = setup_verify(bio_err, CAfile, CApath)))
-			goto end;
-		X509_STORE_set_verify_cb(store, smime_cb);
-		if (vpm)
-			X509_STORE_set1_param(store, vpm);
-		}
+	if(operation == SMIME_VERIFY) {
+		if(!(store = setup_verify(bio_err, CAfile, CApath))) goto end;
+		X509_STORE_set_flags(store, store_flags);
+	}
 
 
 	ret = 3;
 
-	if (operation == SMIME_ENCRYPT)
-		{
-		if (indef)
-			flags |= PKCS7_STREAM;
+	if(operation == SMIME_ENCRYPT) {
 		p7 = PKCS7_encrypt(encerts, in, cipher, flags);
+	} else if(operation == SMIME_SIGN) {
+		p7 = PKCS7_sign(signer, key, other, in, flags);
+		if ((flags & PKCS7_DETACHED) && (outformat == FORMAT_SMIME)
+			&& (BIO_reset(in) != 0)) {
+		  BIO_printf(bio_err, "Can't rewind input file\n");
+		  goto end;
 		}
-	else if (operation & SMIME_SIGNERS)
-		{
-		int i;
-		/* If detached data content we only enable streaming if
-		 * S/MIME output format.
-		 */
-		if (operation == SMIME_SIGN)
-			{
-			if (flags & PKCS7_DETACHED)
-				{
-				if (outformat == FORMAT_SMIME)
-					flags |= PKCS7_STREAM;
-				}
-			else if (indef)
-				flags |= PKCS7_STREAM;
-			flags |= PKCS7_PARTIAL;
-			p7 = PKCS7_sign(NULL, NULL, other, in, flags);
-			if (!p7)
-				goto end;
-			}
-		else
-			flags |= PKCS7_REUSE_DIGEST;
-		for (i = 0; i < sk_OPENSSL_STRING_num(sksigners); i++)
-			{
-			signerfile = sk_OPENSSL_STRING_value(sksigners, i);
-			keyfile = sk_OPENSSL_STRING_value(skkeys, i);
-			signer = load_cert(bio_err, signerfile,FORMAT_PEM, NULL,
-					e, "signer certificate");
-			if (!signer)
-				goto end;
-			key = load_key(bio_err, keyfile, keyform, 0, passin, e,
-			       "signing key file");
-			if (!key)
-				goto end;
-			if (!PKCS7_sign_add_signer(p7, signer, key,
-						sign_md, flags))
-				goto end;
-			X509_free(signer);
-			signer = NULL;
-			EVP_PKEY_free(key);
-			key = NULL;
-			}
-		/* If not streaming or resigning finalize structure */
-		if ((operation == SMIME_SIGN) && !(flags & PKCS7_STREAM))
-			{
-			if (!PKCS7_final(p7, in, flags))
-				goto end;
-			}
+	} else {
+		if(informat == FORMAT_SMIME) 
+			p7 = SMIME_read_PKCS7(in, &indata);
+		else if(informat == FORMAT_PEM) 
+			p7 = PEM_read_bio_PKCS7(in, NULL, NULL, NULL);
+		else if(informat == FORMAT_ASN1) 
+			p7 = d2i_PKCS7_bio(in, NULL);
+		else {
+			BIO_printf(bio_err, "Bad input format for PKCS#7 file\n");
+			goto end;
 		}
 
-	if (!p7)
-		{
+		if(!p7) {
+			BIO_printf(bio_err, "Error reading S/MIME message\n");
+			goto end;
+		}
+		if(contfile) {
+			BIO_free(indata);
+			if(!(indata = BIO_new_file(contfile, "rb"))) {
+				BIO_printf(bio_err, "Can't read content file %s\n", contfile);
+				goto end;
+			}
+		}
+	}
+
+	if(!p7) {
 		BIO_printf(bio_err, "Error creating PKCS#7 structure\n");
 		goto end;
-		}
+	}
 
 	ret = 4;
-	if (operation == SMIME_DECRYPT)
-		{
-		if (!PKCS7_decrypt(p7, key, recip, out, flags))
-			{
+	if(operation == SMIME_DECRYPT) {
+		if(!PKCS7_decrypt(p7, key, recip, out, flags)) {
 			BIO_printf(bio_err, "Error decrypting PKCS#7 structure\n");
 			goto end;
-			}
 		}
-	else if (operation == SMIME_VERIFY)
-		{
+	} else if(operation == SMIME_VERIFY) {
 		STACK_OF(X509) *signers;
-		if (PKCS7_verify(p7, other, store, indata, out, flags))
+		if(PKCS7_verify(p7, other, store, indata, out, flags)) {
 			BIO_printf(bio_err, "Verification successful\n");
-		else
-			{
+		} else {
 			BIO_printf(bio_err, "Verification failure\n");
 			goto end;
-			}
+		}
 		signers = PKCS7_get0_signers(p7, other, flags);
-		if (!save_certs(signerfile, signers))
-			{
+		if(!save_certs(signerfile, signers)) {
 			BIO_printf(bio_err, "Error writing signers to %s\n",
 								signerfile);
 			ret = 5;
 			goto end;
-			}
-		sk_X509_free(signers);
 		}
-	else if (operation == SMIME_PK7OUT)
+		sk_X509_free(signers);
+	} else if(operation == SMIME_PK7OUT) {
 		PEM_write_bio_PKCS7(out, p7);
-	else
-		{
-		if (to)
-			BIO_printf(out, "To: %s\n", to);
-		if (from)
-			BIO_printf(out, "From: %s\n", from);
-		if (subject)
-			BIO_printf(out, "Subject: %s\n", subject);
-		if (outformat == FORMAT_SMIME) 
-			{
-			if (operation == SMIME_RESIGN)
-				SMIME_write_PKCS7(out, p7, indata, flags);
-			else
-				SMIME_write_PKCS7(out, p7, in, flags);
-			}
-		else if (outformat == FORMAT_PEM) 
-			PEM_write_bio_PKCS7_stream(out, p7, in, flags);
-		else if (outformat == FORMAT_ASN1) 
-			i2d_PKCS7_bio_stream(out,p7, in, flags);
-		else
-			{
+	} else {
+		if(to) BIO_printf(out, "To: %s\n", to);
+		if(from) BIO_printf(out, "From: %s\n", from);
+		if(subject) BIO_printf(out, "Subject: %s\n", subject);
+		if(outformat == FORMAT_SMIME) 
+			SMIME_write_PKCS7(out, p7, in, flags);
+		else if(outformat == FORMAT_PEM) 
+			PEM_write_bio_PKCS7(out,p7);
+		else if(outformat == FORMAT_ASN1) 
+			i2d_PKCS7_bio(out,p7);
+		else {
 			BIO_printf(bio_err, "Bad output format for PKCS#7 file\n");
 			goto end;
-			}
 		}
+	}
 	ret = 0;
 end:
 	if (need_rand)
 		app_RAND_write_file(NULL, bio_err);
-	if (ret) ERR_print_errors(bio_err);
+	if(ret) ERR_print_errors(bio_err);
 	sk_X509_pop_free(encerts, X509_free);
 	sk_X509_pop_free(other, X509_free);
-	if (vpm)
-		X509_VERIFY_PARAM_free(vpm);
-	if (sksigners)
-		sk_OPENSSL_STRING_free(sksigners);
-	if (skkeys)
-		sk_OPENSSL_STRING_free(skkeys);
 	X509_STORE_free(store);
 	X509_free(cert);
 	X509_free(recip);
@@ -819,39 +573,20 @@ end:
 	BIO_free(in);
 	BIO_free(indata);
 	BIO_free_all(out);
-	if (passin) OPENSSL_free(passin);
+	if(passin) OPENSSL_free(passin);
 	return (ret);
 }
 
 static int save_certs(char *signerfile, STACK_OF(X509) *signers)
-	{
+{
 	int i;
 	BIO *tmp;
-	if (!signerfile)
-		return 1;
+	if(!signerfile) return 1;
 	tmp = BIO_new_file(signerfile, "w");
-	if (!tmp) return 0;
+	if(!tmp) return 0;
 	for(i = 0; i < sk_X509_num(signers); i++)
 		PEM_write_bio_X509(tmp, sk_X509_value(signers, i));
 	BIO_free(tmp);
 	return 1;
-	}
+}
 	
-
-/* Minimal callback just to output policy info (if any) */
-
-static int smime_cb(int ok, X509_STORE_CTX *ctx)
-	{
-	int error;
-
-	error = X509_STORE_CTX_get_error(ctx);
-
-	if ((error != X509_V_ERR_NO_EXPLICIT_POLICY)
-		&& ((error != X509_V_OK) || (ok != 2)))
-		return ok;
-
-	policies_print(NULL, ctx);
-
-	return ok;
-
-	}

apps/spkac.c

@@ -1,6 +1,6 @@
 /* apps/spkac.c */
 
-/* Written by Dr Stephen N Henson (steve@openssl.org) for the OpenSSL
+/* Written by Dr Stephen N Henson (shenson@bigfoot.com) for the OpenSSL
  * project 1999. Based on an original idea by Massimiliano Pala
  * (madwolf@openca.org).
  */
@@ -87,8 +87,7 @@ int MAIN(int argc, char **argv)
 	int verify=0,noout=0,pubkey=0;
 	char *infile = NULL,*outfile = NULL,*prog;
 	char *passargin = NULL, *passin = NULL;
-	const char *spkac = "SPKAC", *spksect = "default";
-	char *spkstr = NULL;
+	char *spkac = "SPKAC", *spksect = "default", *spkstr = NULL;
 	char *challenge = NULL, *keyfile = NULL;
 	CONF *conf = NULL;
 	NETSCAPE_SPKI *spki = NULL;
@@ -201,7 +200,7 @@ bad:
 		}
 		spki = NETSCAPE_SPKI_new();
 		if(challenge) ASN1_STRING_set(spki->spkac->challenge,
-						 challenge, (int)strlen(challenge));
+						 challenge, strlen(challenge));
 		NETSCAPE_SPKI_set_pubkey(spki, pkey);
 		NETSCAPE_SPKI_sign(spki, pkey, EVP_md5());
 		spkstr = NETSCAPE_SPKI_b64_encode(spki);
@@ -285,7 +284,7 @@ bad:
 	pkey = NETSCAPE_SPKI_get_pubkey(spki);
 	if(verify) {
 		i = NETSCAPE_SPKI_verify(spki, pkey);
-		if (i > 0) BIO_printf(bio_err, "Signature OK\n");
+		if(i) BIO_printf(bio_err, "Signature OK\n");
 		else {
 			BIO_printf(bio_err, "Signature Failure\n");
 			ERR_print_errors(bio_err);

apps/timeouts.h

@@ -1,67 +0,0 @@
-/* apps/timeouts.h */
-/* 
- * DTLS implementation written by Nagendra Modadugu
- * (nagendra@cs.stanford.edu) for the OpenSSL project 2005.  
- */
-/* ====================================================================
- * Copyright (c) 1999-2005 The OpenSSL Project.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer. 
- *
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- *
- * 3. All advertising materials mentioning features or use of this
- *    software must display the following acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit. (http://www.OpenSSL.org/)"
- *
- * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
- *    endorse or promote products derived from this software without
- *    prior written permission. For written permission, please contact
- *    openssl-core@OpenSSL.org.
- *
- * 5. Products derived from this software may not be called "OpenSSL"
- *    nor may "OpenSSL" appear in their names without prior written
- *    permission of the OpenSSL Project.
- *
- * 6. Redistributions of any form whatsoever must retain the following
- *    acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit (http://www.OpenSSL.org/)"
- *
- * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
- * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE OpenSSL PROJECT OR
- * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
- * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
- * OF THE POSSIBILITY OF SUCH DAMAGE.
- * ====================================================================
- *
- * This product includes cryptographic software written by Eric Young
- * (eay@cryptsoft.com).  This product includes software written by Tim
- * Hudson (tjh@cryptsoft.com).
- *
- */
-
-#ifndef INCLUDED_TIMEOUTS_H
-#define INCLUDED_TIMEOUTS_H
-
-/* numbers in us */
-#define DGRAM_RCV_TIMEOUT         250000
-#define DGRAM_SND_TIMEOUT         250000
-
-#endif /* ! INCLUDED_TIMEOUTS_H */

apps/tsget

@@ -1,196 +0,0 @@
-#!/usr/bin/perl -w
-# Written by Zoltan Glozik <zglozik@stones.com>.
-# Copyright (c) 2002 The OpenTSA Project.  All rights reserved.
-$::version = '$Id: tsget,v 1.1.2.2 2009/09/07 17:57:02 steve Exp $';
-
-use strict;
-use IO::Handle;
-use Getopt::Std;
-use File::Basename;
-use WWW::Curl::Easy;
-
-use vars qw(%options);
-
-# Callback for reading the body.
-sub read_body {
-    my ($maxlength, $state) = @_;
-    my $return_data = "";
-    my $data_len = length ${$state->{data}};
-    if ($state->{bytes} < $data_len) {
-	$data_len = $data_len - $state->{bytes};
-	$data_len = $maxlength if $data_len > $maxlength;
-	$return_data = substr ${$state->{data}}, $state->{bytes}, $data_len;
-	$state->{bytes} += $data_len;
-    }
-    return $return_data;
-}
-
-# Callback for writing the body into a variable.
-sub write_body {
-    my ($data, $pointer) = @_;
-    ${$pointer} .= $data;
-    return length($data);
-}
-
-# Initialise a new Curl object.
-sub create_curl {
-    my $url = shift;
-
-    # Create Curl object.
-    my $curl = WWW::Curl::Easy::new();
-
-    # Error-handling related options.
-    $curl->setopt(CURLOPT_VERBOSE, 1) if $options{d};
-    $curl->setopt(CURLOPT_FAILONERROR, 1);
-    $curl->setopt(CURLOPT_USERAGENT, "OpenTSA tsget.pl/" . (split / /, $::version)[2]);
-
-    # Options for POST method.
-    $curl->setopt(CURLOPT_UPLOAD, 1);
-    $curl->setopt(CURLOPT_CUSTOMREQUEST, "POST");
-    $curl->setopt(CURLOPT_HTTPHEADER,
-		["Content-Type: application/timestamp-query",
-		"Accept: application/timestamp-reply,application/timestamp-response"]);
-    $curl->setopt(CURLOPT_READFUNCTION, \&read_body);
-    $curl->setopt(CURLOPT_HEADERFUNCTION, sub { return length($_[0]); });
-
-    # Options for getting the result.
-    $curl->setopt(CURLOPT_WRITEFUNCTION, \&write_body);
-
-    # SSL related options.
-    $curl->setopt(CURLOPT_SSLKEYTYPE, "PEM");
-    $curl->setopt(CURLOPT_SSL_VERIFYPEER, 1);	# Verify server's certificate.
-    $curl->setopt(CURLOPT_SSL_VERIFYHOST, 2);	# Check server's CN.
-    $curl->setopt(CURLOPT_SSLKEY, $options{k}) if defined($options{k});
-    $curl->setopt(CURLOPT_SSLKEYPASSWD, $options{p}) if defined($options{p});
-    $curl->setopt(CURLOPT_SSLCERT, $options{c}) if defined($options{c});
-    $curl->setopt(CURLOPT_CAINFO, $options{C}) if defined($options{C});
-    $curl->setopt(CURLOPT_CAPATH, $options{P}) if defined($options{P});
-    $curl->setopt(CURLOPT_RANDOM_FILE, $options{r}) if defined($options{r});
-    $curl->setopt(CURLOPT_EGDSOCKET, $options{g}) if defined($options{g});
-
-    # Setting destination.
-    $curl->setopt(CURLOPT_URL, $url);
-
-    return $curl;
-}
-
-# Send a request and returns the body back.
-sub get_timestamp {
-    my $curl = shift;
-    my $body = shift;
-    my $ts_body;
-    local $::error_buf;
-
-    # Error-handling related options.
-    $curl->setopt(CURLOPT_ERRORBUFFER, "::error_buf");
-
-    # Options for POST method.
-    $curl->setopt(CURLOPT_INFILE, {data => $body, bytes => 0});
-    $curl->setopt(CURLOPT_INFILESIZE, length(${$body}));
-
-    # Options for getting the result.
-    $curl->setopt(CURLOPT_FILE, \$ts_body);
-
-    # Send the request...
-    my $error_code = $curl->perform();
-    my $error_string;
-    if ($error_code != 0) {
-        my $http_code = $curl->getinfo(CURLINFO_HTTP_CODE);
-	$error_string = "could not get timestamp";
-	$error_string .= ", http code: $http_code" unless $http_code == 0;
-	$error_string .= ", curl code: $error_code";
-	$error_string .= " ($::error_buf)" if defined($::error_buf);
-    } else {
-        my $ct = $curl->getinfo(CURLINFO_CONTENT_TYPE);
-	if (lc($ct) ne "application/timestamp-reply"
-	    && lc($ct) ne "application/timestamp-response") {
-	    $error_string = "unexpected content type returned: $ct";
-        }
-    }
-    return ($ts_body, $error_string);
-
-}
-
-# Print usage information and exists.
-sub usage {
-
-    print STDERR "usage: $0 -h <server_url> [-e <extension>] [-o <output>] ";
-    print STDERR "[-v] [-d] [-k <private_key.pem>] [-p <key_password>] ";
-    print STDERR "[-c <client_cert.pem>] [-C <CA_certs.pem>] [-P <CA_path>] ";
-    print STDERR "[-r <file:file...>] [-g <EGD_socket>] [<request>]...\n";
-    exit 1;
-}
-
-# ----------------------------------------------------------------------
-#   Main program
-# ----------------------------------------------------------------------
-
-# Getting command-line options (default comes from TSGET environment variable).
-my $getopt_arg =  "h:e:o:vdk:p:c:C:P:r:g:";
-if (exists $ENV{TSGET}) {
-    my @old_argv = @ARGV;
-    @ARGV = split /\s+/, $ENV{TSGET};
-    getopts($getopt_arg, \%options) or usage;
-    @ARGV = @old_argv;
-}
-getopts($getopt_arg, \%options) or usage;
-
-# Checking argument consistency.
-if (!exists($options{h}) || (@ARGV == 0 && !exists($options{o}))
-    || (@ARGV > 1 && exists($options{o}))) {
-    print STDERR "Inconsistent command line options.\n";
-    usage;
-}
-# Setting defaults.
-@ARGV = ("-") unless @ARGV != 0;
-$options{e} = ".tsr" unless defined($options{e});
-
-# Processing requests.
-my $curl = create_curl $options{h};
-undef $/;   # For reading whole files.
-REQUEST: foreach (@ARGV) {
-    my $input = $_;
-    my ($base, $path) = fileparse($input, '\.[^.]*');
-    my $output_base = $base . $options{e};
-    my $output = defined($options{o}) ? $options{o} : $path . $output_base;
-
-    STDERR->printflush("$input: ") if $options{v};
-    # Read request.
-    my $body;
-    if ($input eq "-") {
-	# Read the request from STDIN;
-	$body = <STDIN>;
-    } else {
-	# Read the request from file.
-        open INPUT, "<" . $input
-	    or warn("$input: could not open input file: $!\n"), next REQUEST;
-        $body = <INPUT>;
-        close INPUT
-	    or warn("$input: could not close input file: $!\n"), next REQUEST;
-    }
-
-    # Send request.
-    STDERR->printflush("sending request") if $options{v};
-
-    my ($ts_body, $error) = get_timestamp $curl, \$body;
-    if (defined($error)) {
-	die "$input: fatal error: $error\n";
-    }
-    STDERR->printflush(", reply received") if $options{v};
-
-    # Write response.
-    if ($output eq "-") {
-	# Write to STDOUT.
-        print $ts_body;
-    } else {
-	# Write to file.
-        open OUTPUT, ">", $output
-	    or warn("$output: could not open output file: $!\n"), next REQUEST;
-        print OUTPUT $ts_body;
-        close OUTPUT
-	    or warn("$output: could not close output file: $!\n"), next REQUEST;
-    }
-    STDERR->printflush(", $output written.\n") if $options{v};
-}
-$curl->cleanup();
-WWW::Curl::Easy::global_cleanup();

apps/verify.c

@@ -70,9 +70,8 @@
 #define PROG	verify_main
 
 static int MS_CALLBACK cb(int ok, X509_STORE_CTX *ctx);
-static int check(X509_STORE *ctx, char *file,
-		STACK_OF(X509) *uchain, STACK_OF(X509) *tchain,
-		STACK_OF(X509_CRL) *crls, ENGINE *e);
+static int check(X509_STORE *ctx, char *file, STACK_OF(X509) *uchain, STACK_OF(X509) *tchain, int purpose, ENGINE *e);
+static STACK_OF(X509) *load_untrusted(char *file);
 static int v_verbose=0, vflags = 0;
 
 int MAIN(int, char **);
@@ -80,21 +79,20 @@ int MAIN(int, char **);
 int MAIN(int argc, char **argv)
 	{
 	ENGINE *e = NULL;
-	int i,ret=1, badarg = 0;
+	int i,ret=1;
+	int purpose = -1;
 	char *CApath=NULL,*CAfile=NULL;
-	char *untfile = NULL, *trustfile = NULL, *crlfile = NULL;
+	char *untfile = NULL, *trustfile = NULL;
 	STACK_OF(X509) *untrusted = NULL, *trusted = NULL;
-	STACK_OF(X509_CRL) *crls = NULL;
 	X509_STORE *cert_ctx=NULL;
 	X509_LOOKUP *lookup=NULL;
-	X509_VERIFY_PARAM *vpm = NULL;
 #ifndef OPENSSL_NO_ENGINE
 	char *engine=NULL;
 #endif
 
 	cert_ctx=X509_STORE_new();
 	if (cert_ctx == NULL) goto end;
-	X509_STORE_set_verify_cb(cert_ctx,cb);
+	X509_STORE_set_verify_cb_func(cert_ctx,cb);
 
 	ERR_load_crypto_strings();
 
@@ -123,12 +121,18 @@ int MAIN(int argc, char **argv)
 				if (argc-- < 1) goto end;
 				CAfile= *(++argv);
 				}
-			else if (args_verify(&argv, &argc, &badarg, bio_err,
-									&vpm))
+			else if (strcmp(*argv,"-purpose") == 0)
 				{
-				if (badarg)
+				X509_PURPOSE *xptmp;
+				if (argc-- < 1) goto end;
+				i = X509_PURPOSE_get_by_sname(*(++argv));
+				if(i < 0)
+					{
+					BIO_printf(bio_err, "unrecognized purpose\n");
 					goto end;
-				continue;
+					}
+				xptmp = X509_PURPOSE_get0(i);
+				purpose = X509_PURPOSE_get_id(xptmp);
 				}
 			else if (strcmp(*argv,"-untrusted") == 0)
 				{
@@ -140,11 +144,6 @@ int MAIN(int argc, char **argv)
 				if (argc-- < 1) goto end;
 				trustfile= *(++argv);
 				}
-			else if (strcmp(*argv,"-CRLfile") == 0)
-				{
-				if (argc-- < 1) goto end;
-				crlfile= *(++argv);
-				}
 #ifndef OPENSSL_NO_ENGINE
 			else if (strcmp(*argv,"-engine") == 0)
 				{
@@ -154,6 +153,14 @@ int MAIN(int argc, char **argv)
 #endif
 			else if (strcmp(*argv,"-help") == 0)
 				goto end;
+			else if (strcmp(*argv,"-ignore_critical") == 0)
+				vflags |= X509_V_FLAG_IGNORE_CRITICAL;
+			else if (strcmp(*argv,"-issuer_checks") == 0)
+				vflags |= X509_V_FLAG_CB_ISSUER_CHECK;
+			else if (strcmp(*argv,"-crl_check") == 0)
+				vflags |= X509_V_FLAG_CRL_CHECK;
+			else if (strcmp(*argv,"-crl_check_all") == 0)
+				vflags |= X509_V_FLAG_CRL_CHECK|X509_V_FLAG_CRL_CHECK_ALL;
 			else if (strcmp(*argv,"-verbose") == 0)
 				v_verbose=1;
 			else if (argv[0][0] == '-')
@@ -171,9 +178,6 @@ int MAIN(int argc, char **argv)
         e = setup_engine(bio_err, engine, 0);
 #endif
 
-	if (vpm)
-		X509_STORE_set1_param(cert_ctx, vpm);
-
 	lookup=X509_STORE_add_lookup(cert_ctx,X509_LOOKUP_file());
 	if (lookup == NULL) abort();
 	if (CAfile) {
@@ -198,34 +202,26 @@ int MAIN(int argc, char **argv)
 
 	ERR_clear_error();
 
-	if(untfile)
-		{
-		untrusted = load_certs(bio_err, untfile, FORMAT_PEM,
-					NULL, e, "untrusted certificates");
-		if(!untrusted)
+	if(untfile) {
+		if(!(untrusted = load_untrusted(untfile))) {
+			BIO_printf(bio_err, "Error loading untrusted file %s\n", untfile);
+			ERR_print_errors(bio_err);
 			goto end;
 		}
+	}
 
-	if(trustfile)
-		{
-		trusted = load_certs(bio_err, trustfile, FORMAT_PEM,
-					NULL, e, "trusted certificates");
-		if(!trusted)
+	if(trustfile) {
+		if(!(trusted = load_untrusted(trustfile))) {
+			BIO_printf(bio_err, "Error loading untrusted file %s\n", trustfile);
+			ERR_print_errors(bio_err);
 			goto end;
 		}
+	}
 
-	if(crlfile)
-		{
-		crls = load_crls(bio_err, crlfile, FORMAT_PEM,
-					NULL, e, "other CRLs");
-		if(!crls)
-			goto end;
-		}
-
-	if (argc < 1) check(cert_ctx, NULL, untrusted, trusted, crls, e);
+	if (argc < 1) check(cert_ctx, NULL, untrusted, trusted, purpose, e);
 	else
 		for (i=0; i<argc; i++)
-			check(cert_ctx,argv[i], untrusted, trusted, crls, e);
+			check(cert_ctx,argv[i], untrusted, trusted, purpose, e);
 	ret=0;
 end:
 	if (ret == 1) {
@@ -242,18 +238,14 @@ end:
 								X509_PURPOSE_get0_name(ptmp));
 		}
 	}
-	if (vpm) X509_VERIFY_PARAM_free(vpm);
 	if (cert_ctx != NULL) X509_STORE_free(cert_ctx);
 	sk_X509_pop_free(untrusted, X509_free);
 	sk_X509_pop_free(trusted, X509_free);
-	sk_X509_CRL_pop_free(crls, X509_CRL_free);
 	apps_shutdown();
 	OPENSSL_EXIT(ret);
 	}
 
-static int check(X509_STORE *ctx, char *file,
-		STACK_OF(X509) *uchain, STACK_OF(X509) *tchain,
-		STACK_OF(X509_CRL) *crls, ENGINE *e)
+static int check(X509_STORE *ctx, char *file, STACK_OF(X509) *uchain, STACK_OF(X509) *tchain, int purpose, ENGINE *e)
 	{
 	X509 *x=NULL;
 	int i=0,ret=0;
@@ -277,14 +269,13 @@ static int check(X509_STORE *ctx, char *file,
 		goto end;
 		}
 	if(tchain) X509_STORE_CTX_trusted_stack(csc, tchain);
-	if (crls)
-		X509_STORE_CTX_set0_crls(csc, crls);
+	if(purpose >= 0) X509_STORE_CTX_set_purpose(csc, purpose);
 	i=X509_verify_cert(csc);
 	X509_STORE_CTX_free(csc);
 
 	ret=0;
 end:
-	if (i > 0)
+	if (i)
 		{
 		fprintf(stdout,"OK\n");
 		ret=1;
@@ -296,55 +287,83 @@ end:
 	return(ret);
 	}
 
+static STACK_OF(X509) *load_untrusted(char *certfile)
+{
+	STACK_OF(X509_INFO) *sk=NULL;
+	STACK_OF(X509) *stack=NULL, *ret=NULL;
+	BIO *in=NULL;
+	X509_INFO *xi;
+
+	if(!(stack = sk_X509_new_null())) {
+		BIO_printf(bio_err,"memory allocation failure\n");
+		goto end;
+	}
+
+	if(!(in=BIO_new_file(certfile, "r"))) {
+		BIO_printf(bio_err,"error opening the file, %s\n",certfile);
+		goto end;
+	}
+
+	/* This loads from a file, a stack of x509/crl/pkey sets */
+	if(!(sk=PEM_X509_INFO_read_bio(in,NULL,NULL,NULL))) {
+		BIO_printf(bio_err,"error reading the file, %s\n",certfile);
+		goto end;
+	}
+
+	/* scan over it and pull out the certs */
+	while (sk_X509_INFO_num(sk))
+		{
+		xi=sk_X509_INFO_shift(sk);
+		if (xi->x509 != NULL)
+			{
+			sk_X509_push(stack,xi->x509);
+			xi->x509=NULL;
+			}
+		X509_INFO_free(xi);
+		}
+	if(!sk_X509_num(stack)) {
+		BIO_printf(bio_err,"no certificates in file, %s\n",certfile);
+		sk_X509_free(stack);
+		goto end;
+	}
+	ret=stack;
+end:
+	BIO_free(in);
+	sk_X509_INFO_free(sk);
+	return(ret);
+	}
+
 static int MS_CALLBACK cb(int ok, X509_STORE_CTX *ctx)
 	{
-	int cert_error = X509_STORE_CTX_get_error(ctx);
-	X509 *current_cert = X509_STORE_CTX_get_current_cert(ctx);
+	char buf[256];
 
 	if (!ok)
 		{
-		if (current_cert)
-			{
-			X509_NAME_print_ex_fp(stdout,
-				X509_get_subject_name(current_cert),
-				0, XN_FLAG_ONELINE);
-			printf("\n");
-			}
-		printf("%serror %d at %d depth lookup:%s\n",
-			X509_STORE_CTX_get0_parent_ctx(ctx) ? "[CRL path]" : "",
-			cert_error,
-			X509_STORE_CTX_get_error_depth(ctx),
-			X509_verify_cert_error_string(cert_error));
-		switch(cert_error)
-			{
-			case X509_V_ERR_NO_EXPLICIT_POLICY:
-				policies_print(NULL, ctx);
-			case X509_V_ERR_CERT_HAS_EXPIRED:
-
-			/* since we are just checking the certificates, it is
-			 * ok if they are self signed. But we should still warn
-			 * the user.
-			 */
-
-			case X509_V_ERR_DEPTH_ZERO_SELF_SIGNED_CERT:
-			/* Continue after extension errors too */
-			case X509_V_ERR_INVALID_CA:
-			case X509_V_ERR_INVALID_NON_CA:
-			case X509_V_ERR_PATH_LENGTH_EXCEEDED:
-			case X509_V_ERR_INVALID_PURPOSE:
-			case X509_V_ERR_CRL_HAS_EXPIRED:
-			case X509_V_ERR_CRL_NOT_YET_VALID:
-			case X509_V_ERR_UNHANDLED_CRITICAL_EXTENSION:
-			ok = 1;
-
-			}
-
-		return ok;
-
+		X509_NAME_oneline(
+				X509_get_subject_name(ctx->current_cert),buf,
+				sizeof buf);
+		printf("%s\n",buf);
+		printf("error %d at %d depth lookup:%s\n",ctx->error,
+			ctx->error_depth,
+			X509_verify_cert_error_string(ctx->error));
+		if (ctx->error == X509_V_ERR_CERT_HAS_EXPIRED) ok=1;
+		/* since we are just checking the certificates, it is
+		 * ok if they are self signed. But we should still warn
+		 * the user.
+ 		 */
+		if (ctx->error == X509_V_ERR_DEPTH_ZERO_SELF_SIGNED_CERT) ok=1;
+		/* Continue after extension errors too */
+		if (ctx->error == X509_V_ERR_INVALID_CA) ok=1;
+		if (ctx->error == X509_V_ERR_INVALID_NON_CA) ok=1;
+		if (ctx->error == X509_V_ERR_PATH_LENGTH_EXCEEDED) ok=1;
+		if (ctx->error == X509_V_ERR_INVALID_PURPOSE) ok=1;
+		if (ctx->error == X509_V_ERR_DEPTH_ZERO_SELF_SIGNED_CERT) ok=1;
+		if (ctx->error == X509_V_ERR_CRL_HAS_EXPIRED) ok=1;
+		if (ctx->error == X509_V_ERR_CRL_NOT_YET_VALID) ok=1;
+		if (ctx->error == X509_V_ERR_UNHANDLED_CRITICAL_EXTENSION) ok=1;
 		}
-	if (cert_error == X509_V_OK && ok == 2)
-		policies_print(NULL, ctx);
 	if (!v_verbose)
 		ERR_clear_error();
 	return(ok);
 	}
+

apps/version.c

@@ -115,7 +115,6 @@
 #include "apps.h"
 #include <openssl/evp.h>
 #include <openssl/crypto.h>
-#include <openssl/bn.h>
 #ifndef OPENSSL_NO_MD2
 # include <openssl/md2.h>
 #endif
@@ -167,25 +166,13 @@ int MAIN(int argc, char **argv)
 			date=version=cflags=options=platform=dir=1;
 		else
 			{
-			BIO_printf(bio_err,"usage:version -[avbofpd]\n");
+			BIO_printf(bio_err,"usage:version -[avbofp]\n");
 			ret=1;
 			goto end;
 			}
 		}
 
-	if (version)
-		{
-		if (SSLeay() == SSLEAY_VERSION_NUMBER)
-			{
-			printf("%s\n",SSLeay_version(SSLEAY_VERSION));
-			}
-		else
-			{
-			printf("%s (Library: %s)\n",
-				OPENSSL_VERSION_TEXT,
-				SSLeay_version(SSLEAY_VERSION));
-			}
-		}
+	if (version) printf("%s\n",SSLeay_version(SSLEAY_VERSION));
 	if (date)    printf("%s\n",SSLeay_version(SSLEAY_BUILT_ON));
 	if (platform) printf("%s\n",SSLeay_version(SSLEAY_PLATFORM));
 	if (options) 

apps/x509.c

@@ -73,12 +73,6 @@
 #include <openssl/x509v3.h>
 #include <openssl/objects.h>
 #include <openssl/pem.h>
-#ifndef OPENSSL_NO_RSA
-#include <openssl/rsa.h>
-#endif
-#ifndef OPENSSL_NO_DSA
-#include <openssl/dsa.h>
-#endif
 
 #undef PROG
 #define PROG x509_main
@@ -87,7 +81,7 @@
 #define	POSTFIX	".srl"
 #define DEF_DAYS	30
 
-static const char *x509_usage[]={
+static char *x509_usage[]={
 "usage: x509 args\n",
 " -inform arg     - input format - default PEM (one of DER, NET or PEM)\n",
 " -outform arg    - output format - default PEM (one of DER, NET or PEM)\n",
@@ -98,15 +92,7 @@ static const char *x509_usage[]={
 " -out arg        - output file - default stdout\n",
 " -passin arg     - private key password source\n",
 " -serial         - print serial number value\n",
-" -subject_hash   - print subject hash value\n",
-#ifndef OPENSSL_NO_MD5
-" -subject_hash_old   - print old-style (MD5) subject hash value\n",
-#endif
-" -issuer_hash    - print issuer hash value\n",
-#ifndef OPENSSL_NO_MD5
-" -issuer_hash_old    - print old-style (MD5) issuer hash value\n",
-#endif
-" -hash           - synonym for -subject_hash\n",
+" -hash           - print hash value\n",
 " -subject        - print subject DN\n",
 " -issuer         - print issuer DN\n",
 " -email          - print email address(es)\n",
@@ -120,7 +106,6 @@ static const char *x509_usage[]={
 " -alias          - output certificate alias\n",
 " -noout          - no certificate output\n",
 " -ocspid         - print OCSP hash values for the subject name and public key\n",
-" -ocsp_uri       - print OCSP Responder URL(s)\n",
 " -trustout       - output a \"trusted\" certificate\n",
 " -clrtrust       - clear all trusted purposes\n",
 " -clrreject      - clear all rejected purposes\n",
@@ -182,24 +167,19 @@ int MAIN(int argc, char **argv)
 	char *infile=NULL,*outfile=NULL,*keyfile=NULL,*CAfile=NULL;
 	char *CAkeyfile=NULL,*CAserial=NULL;
 	char *alias=NULL;
-	int text=0,serial=0,subject=0,issuer=0,startdate=0,enddate=0;
-	int next_serial=0;
-	int subject_hash=0,issuer_hash=0,ocspid=0;
-#ifndef OPENSSL_NO_MD5
-	int subject_hash_old=0,issuer_hash_old=0;
-#endif
+	int text=0,serial=0,hash=0,subject=0,issuer=0,startdate=0,enddate=0;
+	int next_serial=0,ocspid=0;
 	int noout=0,sign_flag=0,CA_flag=0,CA_createserial=0,email=0;
-	int ocsp_uri=0;
 	int trustout=0,clrtrust=0,clrreject=0,aliasout=0,clrext=0;
 	int C=0;
 	int x509req=0,days=DEF_DAYS,modulus=0,pubkey=0;
 	int pprint = 0;
-	const char **pp;
+	char **pp;
 	X509_STORE *ctx=NULL;
 	X509_REQ *rq=NULL;
 	int fingerprint=0;
 	char buf[256];
-	const EVP_MD *md_alg,*digest=NULL;
+	const EVP_MD *md_alg,*digest;
 	CONF *extconf = NULL;
 	char *extsect = NULL, *extfile = NULL, *passin = NULL, *passargin = NULL;
 	int need_rand = 0;
@@ -234,7 +214,14 @@ int MAIN(int argc, char **argv)
 
 	ctx=X509_STORE_new();
 	if (ctx == NULL) goto end;
-	X509_STORE_set_verify_cb(ctx,callb);
+	X509_STORE_set_verify_cb_func(ctx,callb);
+
+#ifdef  OPENSSL_FIPS
+	if (FIPS_mode())
+		digest = EVP_sha1();
+	else
+#endif
+		digest = EVP_md5();
 
 	argc--;
 	argv++;
@@ -389,8 +376,6 @@ int MAIN(int argc, char **argv)
 			C= ++num;
 		else if (strcmp(*argv,"-email") == 0)
 			email= ++num;
-		else if (strcmp(*argv,"-ocsp_uri") == 0)
-			ocsp_uri= ++num;
 		else if (strcmp(*argv,"-serial") == 0)
 			serial= ++num;
 		else if (strcmp(*argv,"-next_serial") == 0)
@@ -403,19 +388,8 @@ int MAIN(int argc, char **argv)
 			x509req= ++num;
 		else if (strcmp(*argv,"-text") == 0)
 			text= ++num;
-		else if (strcmp(*argv,"-hash") == 0
-			|| strcmp(*argv,"-subject_hash") == 0)
-			subject_hash= ++num;
-#ifndef OPENSSL_NO_MD5
-		else if (strcmp(*argv,"-subject_hash_old") == 0)
-			subject_hash_old= ++num;
-#endif
-		else if (strcmp(*argv,"-issuer_hash") == 0)
-			issuer_hash= ++num;
-#ifndef OPENSSL_NO_MD5
-		else if (strcmp(*argv,"-issuer_hash_old") == 0)
-			issuer_hash_old= ++num;
-#endif
+		else if (strcmp(*argv,"-hash") == 0)
+			hash= ++num;
 		else if (strcmp(*argv,"-subject") == 0)
 			subject= ++num;
 		else if (strcmp(*argv,"-issuer") == 0)
@@ -556,6 +530,7 @@ bad:
 	if (reqfile)
 		{
 		EVP_PKEY *pkey;
+		X509_CINF *ci;
 		BIO *in;
 
 		if (!sign_flag && !CA_flag)
@@ -623,6 +598,7 @@ bad:
 		print_name(bio_err, "subject=", X509_REQ_get_subject_name(req), nmflag);
 
 		if ((x=X509_new()) == NULL) goto end;
+		ci=x->cert_info;
 
 		if (sno == NULL)
 			{
@@ -641,7 +617,7 @@ bad:
 		if (!X509_set_subject_name(x,req->req_info->subject)) goto end;
 
 		X509_gmtime_adj(X509_get_notBefore(x),0);
-	        X509_time_adj_ex(X509_get_notAfter(x),days, 0, NULL);
+	        X509_gmtime_adj(X509_get_notAfter(x),(long)60*60*24*days);
 
 		pkey = X509_REQ_get_pubkey(req);
 		X509_set_pubkey(x,pkey);
@@ -728,8 +704,7 @@ bad:
 			else if (serial == i)
 				{
 				BIO_printf(STDout,"serial=");
-				i2a_ASN1_INTEGER(STDout,
-					X509_get_serialNumber(x));
+				i2a_ASN1_INTEGER(STDout,x->cert_info->serialNumber);
 				BIO_printf(STDout,"\n");
 				}
 			else if (next_serial == i)
@@ -750,17 +725,13 @@ bad:
 				ASN1_INTEGER_free(ser);
 				BIO_puts(out, "\n");
 				}
-			else if ((email == i) || (ocsp_uri == i))
+			else if (email == i) 
 				{
 				int j;
-				STACK_OF(OPENSSL_STRING) *emlst;
-				if (email == i)
-					emlst = X509_get1_email(x);
-				else
-					emlst = X509_get1_ocsp(x);
-				for (j = 0; j < sk_OPENSSL_STRING_num(emlst); j++)
-					BIO_printf(STDout, "%s\n",
-						   sk_OPENSSL_STRING_value(emlst, j));
+				STACK *emlst;
+				emlst = X509_get1_email(x);
+				for (j = 0; j < sk_num(emlst); j++)
+					BIO_printf(STDout, "%s\n", sk_value(emlst, j));
 				X509_email_free(emlst);
 				}
 			else if (aliasout == i)
@@ -770,26 +741,10 @@ bad:
 				if (alstr) BIO_printf(STDout,"%s\n", alstr);
 				else BIO_puts(STDout,"<No Alias>\n");
 				}
-			else if (subject_hash == i)
+			else if (hash == i)
 				{
 				BIO_printf(STDout,"%08lx\n",X509_subject_name_hash(x));
 				}
-#ifndef OPENSSL_NO_MD5
-			else if (subject_hash_old == i)
-				{
-				BIO_printf(STDout,"%08lx\n",X509_subject_name_hash_old(x));
-				}
-#endif
-			else if (issuer_hash == i)
-				{
-				BIO_printf(STDout,"%08lx\n",X509_issuer_name_hash(x));
-				}
-#ifndef OPENSSL_NO_MD5
-			else if (issuer_hash_old == i)
-				{
-				BIO_printf(STDout,"%08lx\n",X509_issuer_name_hash_old(x));
-				}
-#endif
 			else if (pprint == i)
 				{
 				X509_PURPOSE *ptmp;
@@ -920,18 +875,14 @@ bad:
 				int j;
 				unsigned int n;
 				unsigned char md[EVP_MAX_MD_SIZE];
-				const EVP_MD *fdig = digest;
 
-				if (!fdig)
-					fdig = EVP_sha1();
-
-				if (!X509_digest(x,fdig,md,&n))
+				if (!X509_digest(x,digest,md,&n))
 					{
 					BIO_printf(bio_err,"out of memory\n");
 					goto end;
 					}
 				BIO_printf(STDout,"%s Fingerprint=",
-						OBJ_nid2sn(EVP_MD_type(fdig)));
+						OBJ_nid2sn(EVP_MD_type(digest)));
 				for (j=0; j<(int)n; j++)
 					{
 					BIO_printf(STDout,"%02X%c",md[j],
@@ -951,6 +902,10 @@ bad:
 						passin, e, "Private key");
 					if (Upkey == NULL) goto end;
 					}
+#ifndef OPENSSL_NO_DSA
+		                if (Upkey->type == EVP_PKEY_DSA)
+		                        digest=EVP_dss1();
+#endif
 
 				assert(need_rand);
 				if (!sign(x,Upkey,days,clrext,digest,
@@ -967,6 +922,10 @@ bad:
 						"CA Private Key");
 					if (CApkey == NULL) goto end;
 					}
+#ifndef OPENSSL_NO_DSA
+		                if (CApkey->type == EVP_PKEY_DSA)
+		                        digest=EVP_dss1();
+#endif
 				
 				assert(need_rand);
 				if (!x509_certify(ctx,CAfile,digest,x,xca,
@@ -994,6 +953,11 @@ bad:
 
 				BIO_printf(bio_err,"Generating certificate request\n");
 
+#ifndef OPENSSL_NO_DSA
+		                if (pk->type == EVP_PKEY_DSA)
+		                        digest=EVP_dss1();
+#endif
+
 				rq=X509_to_X509_REQ(x,pk,digest);
 				EVP_PKEY_free(pk);
 				if (rq == NULL)
@@ -1047,15 +1011,17 @@ bad:
 		}
 	else if (outformat == FORMAT_NETSCAPE)
 		{
-		NETSCAPE_X509 nx;
-		ASN1_OCTET_STRING hdr;
+		ASN1_HEADER ah;
+		ASN1_OCTET_STRING os;
 
-		hdr.data=(unsigned char *)NETSCAPE_CERT_HDR;
-		hdr.length=strlen(NETSCAPE_CERT_HDR);
-		nx.header= &hdr;
-		nx.cert=x;
+		os.data=(unsigned char *)NETSCAPE_CERT_HDR;
+		os.length=strlen(NETSCAPE_CERT_HDR);
+		ah.header= &os;
+		ah.data=(char *)x;
+		ah.meth=X509_asn1_meth();
 
-		i=ASN1_item_i2d_bio(ASN1_ITEM_rptr(NETSCAPE_X509),out,&nx);
+		/* no macro for this one yet */
+		i=ASN1_i2d_bio(i2d_ASN1_HEADER,out,(unsigned char *)&ah);
 		}
 	else	{
 		BIO_printf(bio_err,"bad output format specified for outfile\n");
@@ -1157,8 +1123,7 @@ static int x509_certify(X509_STORE *ctx, char *CAfile, const EVP_MD *digest,
 	/* NOTE: this certificate can/should be self signed, unless it was
 	 * a certificate request in which case it is not. */
 	X509_STORE_CTX_set_cert(&xsc,x);
-	X509_STORE_CTX_set_flags(&xsc, X509_V_FLAG_CHECK_SS_SIGNATURE);
-	if (!reqfile && X509_verify_cert(&xsc) <= 0)
+	if (!reqfile && !X509_verify_cert(&xsc))
 		goto end;
 
 	if (!X509_check_private_key(xca,pkey))
@@ -1174,7 +1139,7 @@ static int x509_certify(X509_STORE *ctx, char *CAfile, const EVP_MD *digest,
 		goto end;
 
 	/* hardwired expired */
-	if (X509_time_adj_ex(X509_get_notAfter(x),days, 0, NULL) == NULL)
+	if (X509_gmtime_adj(X509_get_notAfter(x),(long)60*60*24*days) == NULL)
 		goto end;
 
 	if (clrext)

bugs/VC16.bug

@@ -0,0 +1,18 @@
+Microsoft (R) C/C++ Optimizing Compiler Version 8.00c
+
+Compile with /O2 chokes the compiler on these files
+
+crypto\md\md5_dgst.c		warning '@(#)reg86.c:1.26', line 1110
+crypto\des\ofb64ede.c		warning '@(#)grammar.c:1.147', line 168
+crypto\des\ofb64enc.c		warning '@(#)grammar.c:1.147', line 168
+crypto\des\qud_cksm.c		warning '@(#)grammar.c:1.147', line 168
+crypto\rc2\rc2ofb64.c		warning '@(#)grammar.c:1.147', line 168
+crypto\objects\obj_dat.c	warning	'@(#)grammar.c:1.147', line 168
+				fatal	'@(#)grammar.c:1.147', line 168
+crypto\objects\obj_lib.c	warning	'@(#)grammar.c:1.147', line 168
+				fatal	'@(#)grammar.c:1.147', line 168
+ssl\ssl_auth.c			warning	'@(#)grammar.c:1.147', line 168
+				fatal	'@(#)grammar.c:1.147', line 168
+
+Turning on /G3 with build flags that worked fine for /G2 came up with
+divide by zero errors in 'normal' code in speed.c :-(

certs/README.RootCerts

@@ -1,4 +0,0 @@
-The OpenSSL project does not (any longer) include root CA certificates.
-
-Please check out the FAQ:
-  * How can I set up a bundle of commercial root CA certificates?

certs/RegTP-5R.pem

@@ -0,0 +1,19 @@
+issuer= CN=5R-CA 1:PN+0.2.262.1.10.7.20=#130131,O=Regulierungsbeh\C3\88orde f\C3\88ur Telekommunikation und Post,C=DE
+notBefore=Mar 22 08:55:51 2000 GMT
+notAfter=Mar 22 08:55:51 2005 GMT
+subject= CN=5R-CA 1:PN+0.2.262.1.10.7.20=#130131,O=Regulierungsbeh\C3\88orde f\C3\88ur Telekommunikation und Post,C=DE
+-----BEGIN CERTIFICATE-----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=
+-----END CERTIFICATE-----

certs/RegTP-6R.pem

@@ -0,0 +1,19 @@
+issuer= CN=6R-Ca 1:PN+0.2.262.1.10.7.20=#130131,O=Regulierungsbeh\C3\88orde f\C3\88ur Telekommunikation und Post,C=DE
+notBefore=Feb  1 09:52:17 2001 GMT
+notAfter=Jun  1 09:52:17 2005 GMT
+subject= CN=6R-Ca 1:PN+0.2.262.1.10.7.20=#130131,O=Regulierungsbeh\C3\88orde f\C3\88ur Telekommunikation und Post,C=DE
+-----BEGIN CERTIFICATE-----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=
+-----END CERTIFICATE-----

certs/aol1.pem

@@ -0,0 +1,22 @@
+-----BEGIN CERTIFICATE-----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+-----END CERTIFICATE-----

certs/aol2.pem

@@ -0,0 +1,33 @@
+-----BEGIN CERTIFICATE-----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+-----END CERTIFICATE-----

certs/aoltw1.pem

@@ -0,0 +1,23 @@
+-----BEGIN CERTIFICATE-----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+-----END CERTIFICATE-----