Add security patch and create release.

Tags will be OpenSSL_0_9_6b and OpenSSL-engine-0_9_6b

CHANGES

@@ -2,7 +2,129 @@
  OpenSSL CHANGES
  _______________
 
- Changes between 0.9.6 and 0.9.6a  [xx XXX 2001]
+ Changes between 0.9.6a and 0.9.6b  [9 Jul 2001]
+
+  *) Change ssleay_rand_bytes (crypto/rand/md_rand.c)
+     to avoid a SSLeay/OpenSSL PRNG weakness pointed out by
+     Markku-Juhani O. Saarinen <markku-juhani.saarinen@nokia.com>:
+     PRNG state recovery was possible based on the output of
+     one PRNG request appropriately sized to gain knowledge on
+     'md' followed by enough consecutive 1-byte PRNG requests
+     to traverse all of 'state'.
+
+     1. When updating 'md_local' (the current thread's copy of 'md')
+        during PRNG output generation, hash all of the previous
+        'md_local' value, not just the half used for PRNG output.
+
+     2. Make the number of bytes from 'state' included into the hash
+        independent from the number of PRNG bytes requested.
+
+     The first measure alone would be sufficient to avoid
+     Markku-Juhani's attack.  (Actually it had never occurred
+     to me that the half of 'md_local' used for chaining was the
+     half from which PRNG output bytes were taken -- I had always
+     assumed that the secret half would be used.)  The second
+     measure makes sure that additional data from 'state' is never
+     mixed into 'md_local' in small portions; this heuristically
+     further strengthens the PRNG.
+     [Bodo Moeller]
+
+  *) Fix crypto/bn/asm/mips3.s.
+     [Andy Polyakov]
+
+  *) When only the key is given to "enc", the IV is undefined. Print out
+     an error message in this case.
+     [Lutz Jaenicke]
+
+  *) Handle special case when X509_NAME is empty in X509 printing routines.
+     [Steve Henson]
+
+  *) In dsa_do_verify (crypto/dsa/dsa_ossl.c), verify that r and s are
+     positive and less than q.
+     [Bodo Moeller]
+
+  *) Don't change *pointer in CRYPTO_add_lock() is add_lock_callback is
+     used: it isn't thread safe and the add_lock_callback should handle
+     that itself.
+     [Paul Rose <Paul.Rose@bridge.com>]
+
+  *) Verify that incoming data obeys the block size in
+     ssl3_enc (ssl/s3_enc.c) and tls1_enc (ssl/t1_enc.c).
+     [Bodo Moeller]
+
+  *) Fix OAEP check.
+     [Ulf M<>ller, Bodo M<>ller]
+
+  *) The countermeasure against Bleichbacher's attack on PKCS #1 v1.5
+     RSA encryption was accidentily removed in s3_srvr.c in OpenSSL 0.9.5
+     when fixing the server behaviour for backwards-compatible 'client
+     hello' messages.  (Note that the attack is impractical against
+     SSL 3.0 and TLS 1.0 anyway because length and version checking
+     means that the probability of guessing a valid ciphertext is
+     around 2^-40; see section 5 in Bleichenbacher's CRYPTO '98
+     paper.)
+
+     Before 0.9.5, the countermeasure (hide the error by generating a
+     random 'decryption result') did not work properly because
+     ERR_clear_error() was missing, meaning that SSL_get_error() would
+     detect the supposedly ignored error.
+
+     Both problems are now fixed.
+     [Bodo Moeller]
+
+  *) In crypto/bio/bf_buff.c, increase DEFAULT_BUFFER_SIZE to 4096
+     (previously it was 1024).
+     [Bodo Moeller]
+
+  *) Fix for compatibility mode trust settings: ignore trust settings
+     unless some valid trust or reject settings are present.
+     [Steve Henson]
+
+  *) Fix for blowfish EVP: its a variable length cipher.
+     [Steve Henson]
+
+  *) Fix various bugs related to DSA S/MIME verification. Handle missing
+     parameters in DSA public key structures and return an error in the
+     DSA routines if parameters are absent.
+     [Steve Henson]
+
+  *) In versions up to 0.9.6, RAND_file_name() resorted to file ".rnd"
+     in the current directory if neither $RANDFILE nor $HOME was set.
+     RAND_file_name() in 0.9.6a returned NULL in this case.  This has
+     caused some confusion to Windows users who haven't defined $HOME.
+     Thus RAND_file_name() is changed again: e_os.h can define a
+     DEFAULT_HOME, which will be used if $HOME is not set.
+     For Windows, we use "C:"; on other platforms, we still require
+     environment variables.
+
+  *) Move 'if (!initialized) RAND_poll()' into regions protected by
+     CRYPTO_LOCK_RAND.  This is not strictly necessary, but avoids
+     having multiple threads call RAND_poll() concurrently.
+     [Bodo Moeller]
+
+  *) In crypto/rand/md_rand.c, replace 'add_do_not_lock' flag by a
+     combination of a flag and a thread ID variable.
+     Otherwise while one thread is in ssleay_rand_bytes (which sets the
+     flag), *other* threads can enter ssleay_add_bytes without obeying
+     the CRYPTO_LOCK_RAND lock (and may even illegaly release the lock
+     that they do not hold after the first thread unsets add_do_not_lock).
+     [Bodo Moeller]
+
+  *) Change bctest again: '-x' expressions are not available in all
+     versions of 'test'.
+     [Bodo Moeller]
+
+ Changes between 0.9.6 and 0.9.6a  [5 Apr 2001]
+
+  *) Fix a couple of memory leaks in PKCS7_dataDecode()
+     [Steve Henson, reported by Heyun Zheng <hzheng@atdsprint.com>]
+
+  *) Change Configure and Makefiles to provide EXE_EXT, which will contain
+     the default extension for executables, if any.  Also, make the perl
+     scripts that use symlink() to test if it really exists and use "cp"
+     if it doesn't.  All this made OpenSSL compilable and installable in
+     CygWin.
+     [Richard Levitte]
 
   *) Fix for asn1_GetSequence() for indefinite length constructed data.
      If SEQUENCE is length is indefinite just set c->slen to the total
@@ -12,6 +134,8 @@
 
   *) Change bctest to avoid here-documents inside command substitution
      (workaround for FreeBSD /bin/sh bug).
+     For compatibility with Ultrix, avoid shell functions (introduced
+     in the bctest version that searches along $PATH).
      [Bodo Moeller]
 
   *) Rename 'des_encrypt' to 'des_encrypt1'.  This avoids the clashes
@@ -28,6 +152,9 @@
   *) MIPS assembler BIGNUM division bug fix. 
      [Andy Polyakov]
 
+  *) Disabled incorrect Alpha assembler code.
+     [Richard Levitte]
+
   *) Fix PKCS#7 decode routines so they correctly update the length
      after reading an EOC for the EXPLICIT tag.
      [Steve Henson]
@@ -2348,7 +2475,7 @@
                                      copied!)
      [Bodo Moeller]
 
-  *) Bugfix: SSL_set_mode ignored its parameter, only SSL_CTX_set_mode
+  *) Bugfix: SSL_set_options ignored its parameter, only SSL_CTX_set_options
      worked.
 
   *) Fix problems with no-hmac etc.

Configure

@@ -134,6 +134,9 @@ my %table=(
 # error message.
 "solaris-x86-gcc","gcc:-O3 -fomit-frame-pointer -m486 -Wall -DL_ENDIAN -DNO_INLINE_ASM::-D_REENTRANT:-lsocket -lnsl -ldl:BN_LLONG ${x86_gcc_des} ${x86_gcc_opts}:${x86_sol_asm}:dlfcn:gnu-shared:-fPIC:.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
 
+#### Solaris x86 with Sun C setups
+"solaris-x86-cc","cc:-fast -O -Xa::-D_REENTRANT:-lsocket -lnsl -ldl:BN_LLONG RC4_CHAR RC4_CHUNK DES_PTR DES_UNROLL BF_PTR::::::::::dlfcn:solaris-shared:-KPIC:.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
+
 #### SPARC Solaris with GNU C setups
 "solaris-sparcv7-gcc","gcc:-O3 -fomit-frame-pointer -Wall -DB_ENDIAN -DBN_DIV2W::-D_REENTRANT:-lsocket -lnsl -ldl:BN_LLONG RC4_CHAR RC4_CHUNK DES_UNROLL BF_PTR::::::::::dlfcn:gnu-shared:-fPIC:.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
 "solaris-sparcv8-gcc","gcc:-mv8 -O3 -fomit-frame-pointer -Wall -DB_ENDIAN -DBN_DIV2W::-D_REENTRANT:-lsocket -lnsl -ldl:BN_LLONG RC4_CHAR RC4_CHUNK DES_UNROLL BF_PTR:asm/sparcv8.o:::::::::dlfcn:gnu-shared:-fPIC:.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
@@ -324,7 +327,7 @@ my %table=(
 
 # UnixWare 2.0x fails destest with -O
 "unixware-2.0","cc:-DFILIO_H::-Kthread:-lsocket -lnsl -lx:${x86_gcc_des} ${x86_gcc_opts}:::",
-"unixware-2.0-pentium","cc:-DFILIO_H -Kpentium:-Kthread:-lsocket -lnsl -lx:MD2_CHAR RC4_INDEX ${x86_gcc_des}::",
+"unixware-2.0-pentium","cc:-DFILIO_H -Kpentium::-Kthread:-lsocket -lnsl -lx:MD2_CHAR RC4_INDEX ${x86_gcc_des}::",
 
 # UnixWare 2.1
 "unixware-2.1","cc:-O -DFILIO_H::-Kthread:-lsocket -lnsl -lx:${x86_gcc_des} ${x86_gcc_opts}:::",
@@ -332,7 +335,9 @@ my %table=(
 "unixware-2.1-p6","cc:-O -DFILIO_H -Kp6::-Kthread:-lsocket -lnsl -lx:MD2_CHAR RC4_INDEX ${x86_gcc_des}::",
 
 # UnixWare 7
-"unixware-7","cc:-O -DFILIO_H -Kalloca::-Kthread:-lsocket -lnsl:MD2_CHAR RC4_INDEX ${x86_gcc_des}::",
+"unixware-7","cc:-O -DFILIO_H -Kalloca::-Kthread:-lsocket -lnsl:BN_LLONG MD2_CHAR RC4_INDEX ${x86_gcc_des}::",
+"unixware-7-pentium","cc:-O -DFILIO_H -Kalloca -Kpentium::-Kthread:-lsocket -lnsl:BN_LLONG MD2_CHAR RC4_INDEX ${x86_gcc_des}::",
+"unixware-7-pentium_pro","cc:-O -DFILIO_H -Kalloca -Kpentium_pro::-Kthread:-lsocket -lnsl:BN_LLONG MD2_CHAR RC4_INDEX ${x86_gcc_des}::",
 
 # IBM's AIX.
 "aix-cc",   "cc:-O -DAIX -DB_ENDIAN -qmaxmem=16384::(unknown)::BN_LLONG RC4_CHAR:::",
@@ -365,11 +370,11 @@ my %table=(
 
 # DGUX, 88100.
 "dgux-R3-gcc",	"gcc:-O3 -fomit-frame-pointer::(unknown)::RC4_INDEX DES_UNROLL:::",
-"dgux-R4-gcc",	"gcc:-O3 -fomit-frame-pointer::(unknown):-lnsl -lsocket:RC4_INDEX:RC4_INDEX DES_UNROLL:::",
+"dgux-R4-gcc",	"gcc:-O3 -fomit-frame-pointer::(unknown):-lnsl -lsocket:RC4_INDEX DES_UNROLL:::",
 "dgux-R4-x86-gcc",	"gcc:-O3 -fomit-frame-pointer -DL_ENDIAN::(unknown):-lnsl -lsocket:BN_LLONG ${x86_gcc_des} ${x86_gcc_opts}:${x86_elf_asm}",
 
 # SCO 3 - Tim Rice <tim@multitalents.net>
-"sco3-gcc",  "gcc:-O3 -fomit-frame-pointer -Dssize_t=int -DNO_SYS_UN_H::(unknown)::-lsocket:BN_LLONG ${x86_gcc_des} ${x86_gcc_opts}:::", # the SCO assembler doesn't seem to like our assembler files ...
+"sco3-gcc",  "gcc:-O3 -fomit-frame-pointer -Dssize_t=int -DNO_SYS_UN_H::(unknown):-lsocket:BN_LLONG ${x86_gcc_des} ${x86_gcc_opts}:::", # the SCO assembler doesn't seem to like our assembler files ...
 
 # SCO 5 - Ben Laurie <ben@algroup.co.uk> says the -O breaks the
 # SCO cc.
@@ -432,6 +437,7 @@ my @WinTargets=qw(VC-NT VC-WIN32 VC-WIN16 VC-W31-16 VC-W31-32 VC-MSDOS BC-32
 
 my $prefix="";
 my $openssldir="";
+my $exe_ext="";
 my $install_prefix="";
 my $no_threads=0;
 my $no_shared=1;
@@ -636,6 +642,7 @@ print "Configuring for $target\n";
 
 my $IsWindows=scalar grep /^$target$/,@WinTargets;
 
+$exe_ext=".exe" if ($target eq "CygWin32");
 $openssldir="/usr/local/ssl" if ($openssldir eq "" and $prefix eq "");
 $prefix=$openssldir if $prefix eq "";
 
@@ -838,6 +845,7 @@ while (<IN>)
 	s/^CFLAG=.*$/CFLAG= $cflags/;
 	s/^DEPFLAG=.*$/DEPFLAG= $depflags/;
 	s/^EX_LIBS=.*$/EX_LIBS= $lflags/;
+	s/^EXE_EXT=.*$/EXE_EXT= $exe_ext/;
 	s/^BN_ASM=.*$/BN_ASM= $bn_obj/;
 	s/^DES_ENC=.*$/DES_ENC= $des_obj/;
 	s/^BF_ENC=.*$/BF_ENC= $bf_obj/;

FAQ

@@ -1,20 +1,23 @@
 OpenSSL  -  Frequently Asked Questions
 --------------------------------------
 
+[MISC] Miscellaneous questions
+
 * Which is the current version of OpenSSL?
 * Where is the documentation?
 * How can I contact the OpenSSL developers?
-* Do I need patent licenses to use OpenSSL?
-* Is OpenSSL thread-safe?
-* Why do I get a "PRNG not seeded" error message?
-* Why does the linker complain about undefined symbols?
 * Where can I get a compiled version of OpenSSL?
-* I've compiled a program under Windows and it crashes: why?
-* How do I read or write a DER encoded buffer using the ASN1 functions?
-* I've tried using <M_some_evil_pkcs12_macro> and I get errors why?
-* I've called <some function> and it fails, why?
-* I just get a load of numbers for the error output, what do they mean?
-* Why do I get errors about unknown algorithms?
+* Why aren't tools like 'autoconf' and 'libtool' used?
+
+[LEGAL] Legal questions
+
+* Do I need patent licenses to use OpenSSL?
+* Can I use OpenSSL with GPL software? 
+
+[USER] Questions on using the OpenSSL applications
+
+* Why do I get a "PRNG not seeded" error message?
+* Why do I get an "unable to write 'random state'" error message?
 * How do I create certificates or certificate requests?
 * Why can't I create certificate requests?
 * Why does <SSL program> fail with a certificate verify error?
@@ -22,17 +25,39 @@ OpenSSL  -  Frequently Asked Questions
 * How can I create DSA certificates?
 * Why can't I make an SSL connection using a DSA certificate?
 * How can I remove the passphrase on a private key?
-* Why can't the OpenSSH configure script detect OpenSSL?
+* Why can't I use OpenSSL certificates with SSL client authentication?
+* Why does my browser give a warning about a mismatched hostname?
+
+[BUILD] Questions about building and testing OpenSSL
+
+* Why does the linker complain about undefined symbols?
 * Why does the OpenSSL test fail with "bc: command not found"?
 * Why does the OpenSSL test fail with "bc: 1 no implemented"?
 * Why does the OpenSSL compilation fail on Alpha True64 Unix?
 * Why does the OpenSSL compilation fail with "ar: command not found"?
+* Why does the OpenSSL compilation fail on Win32 with VC++?
 
+[PROG] Questions about programming with OpenSSL
+
+* Is OpenSSL thread-safe?
+* I've compiled a program under Windows and it crashes: why?
+* How do I read or write a DER encoded buffer using the ASN1 functions?
+* I've tried using <M_some_evil_pkcs12_macro> and I get errors why?
+* I've called <some function> and it fails, why?
+* I just get a load of numbers for the error output, what do they mean?
+* Why do I get errors about unknown algorithms?
+* Why can't the OpenSSH configure script detect OpenSSL?
+* Can I use OpenSSL's SSL library with non-blocking I/O?
+* Why doesn't my server application receive a client certificate?
+
+===============================================================================
+
+[MISC] ========================================================================
 
 * Which is the current version of OpenSSL?
 
 The current version is available from <URL: http://www.openssl.org>.
-OpenSSL 0.9.6 was released on September 24th, 2000.
+OpenSSL 0.9.6b was released on July 9th, 2001.
 
 In addition to the current stable release, you can also access daily
 snapshots of the OpenSSL development version at <URL:
@@ -78,6 +103,27 @@ OpenSSL.  Information on the OpenSSL mailing lists is available from
 <URL: http://www.openssl.org>.
 
 
+* Where can I get a compiled version of OpenSSL?
+
+Some applications that use OpenSSL are distributed in binary form.
+When using such an application, you don't need to install OpenSSL
+yourself; the application will include the required parts (e.g. DLLs).
+
+If you want to install OpenSSL on a Windows system and you don't have
+a C compiler, read the "Mingw32" section of INSTALL.W32 for information
+on how to obtain and install the free GNU C compiler.
+
+A number of Linux and *BSD distributions include OpenSSL.
+
+
+* Why aren't tools like 'autoconf' and 'libtool' used?
+
+autoconf will probably be used in future OpenSSL versions. If it was
+less Unix-centric, it might have been used much earlier.
+
+
+[LEGAL] =======================================================================
+
 * Do I need patent licenses to use OpenSSL?
 
 The patents section of the README file lists patents that may apply to
@@ -89,17 +135,25 @@ You can configure OpenSSL so as not to use RC5 and IDEA by using
  ./config no-rc5 no-idea
 
 
-* Is OpenSSL thread-safe?
+* Can I use OpenSSL with GPL software?
 
-Yes (with limitations: an SSL connection may not concurrently be used
-by multiple threads).  On Windows and many Unix systems, OpenSSL
-automatically uses the multi-threaded versions of the standard
-libraries.  If your platform is not one of these, consult the INSTALL
-file.
+On many systems including the major Linux and BSD distributions, yes (the
+GPL does not place restrictions on using libraries that are part of the
+normal operating system distribution).
 
-Multi-threaded applications must provide two callback functions to
-OpenSSL.  This is described in the threads(3) manpage.
+On other systems, the situation is less clear. Some GPL software copyright
+holders claim that you infringe on their rights if you use OpenSSL with
+their software on operating systems that don't normally include OpenSSL.
 
+If you develop open source software that uses OpenSSL, you may find it
+useful to choose an other license than the GPL, or state explicitely that
+"This program is released under the GPL with the additional exemption that
+compiling, linking, and/or using OpenSSL is allowed."  If you are using
+GPL software developed by others, you may want to ask the copyright holder
+for permission to use their software with OpenSSL.
+
+
+[USER] ========================================================================
 
 * Why do I get a "PRNG not seeded" error message?
 
@@ -108,6 +162,7 @@ correctly.  Many open source operating systems provide a "randomness
 device" that serves this purpose.  On other systems, applications have
 to call the RAND_add() or RAND_seed() function with appropriate data
 before generating keys or performing public key encryption.
+(These functions initialize the pseudo-random number generator, PRNG.)
 
 Some broken applications do not do this.  As of version 0.9.5, the
 OpenSSL functions that need randomness report an error if the random
@@ -117,18 +172,36 @@ application you are using.  It is likely that it never worked
 correctly.  OpenSSL 0.9.5 and later make the error visible by refusing
 to perform potentially insecure encryption.
 
-On systems without /dev/urandom, it is a good idea to use the Entropy
-Gathering Demon; see the RAND_egd() manpage for details.
+On systems without /dev/urandom and /dev/random, it is a good idea to
+use the Entropy Gathering Demon (EGD); see the RAND_egd() manpage for
+details.  Starting with version 0.9.7, OpenSSL will automatically look
+for an EGD socket at /var/run/egd-pool, /dev/egd-pool, /etc/egd-pool and
+/etc/entropy.
 
-Most components of the openssl command line tool try to use the
-file $HOME/.rnd (or $RANDFILE, if this environment variable is set)
-for seeding the PRNG.  If this file does not exist or is too short,
-the "PRNG not seeded" error message may occur.
+Most components of the openssl command line utility automatically try
+to seed the random number generator from a file.  The name of the
+default seeding file is determined as follows: If environment variable
+RANDFILE is set, then it names the seeding file.  Otherwise if
+environment variable HOME is set, then the seeding file is $HOME/.rnd.
+If neither RANDFILE nor HOME is set, versions up to OpenSSL 0.9.6 will
+use file .rnd in the current directory while OpenSSL 0.9.6a uses no
+default seeding file at all.  OpenSSL 0.9.6b and later will behave
+similarly to 0.9.6a, but will use a default of "C:" for HOME on
+Windows systems if the environment variable has not been set.
 
-[Note to OpenSSL 0.9.5 users: The command "openssl rsa" in version
-0.9.5 does not do this and will fail on systems without /dev/urandom
-when trying to password-encrypt an RSA key!  This is a bug in the
-library; try a later version instead.]
+If the default seeding file does not exist or is too short, the "PRNG
+not seeded" error message may occur.
+
+The openssl command line utility will write back a new state to the
+default seeding file (and create this file if necessary) unless
+there was no sufficient seeding.
+
+Pointing $RANDFILE to an Entropy Gathering Daemon socket does not work.
+Use the "-rand" option of the OpenSSL command line tools instead.
+The $RANDFILE environment variable and $HOME/.rnd are only used by the
+OpenSSL command line tools. Applications using the OpenSSL library
+provide their own configuration options to specify the entropy source,
+please check out the documentation coming the with application.
 
 For Solaris 2.6, Tim Nibbe <tnibbe@sprint.net> and others have suggested
 installing the SUNski package from Sun patch 105710-01 (Sparc) which
@@ -138,6 +211,113 @@ versions.  However, be warned that /dev/random is usually a blocking
 device, which may have some effects on OpenSSL.
 
 
+* Why do I get an "unable to write 'random state'" error message?
+
+
+Sometimes the openssl command line utility does not abort with
+a "PRNG not seeded" error message, but complains that it is
+"unable to write 'random state'".  This message refers to the
+default seeding file (see previous answer).  A possible reason
+is that no default filename is known because neither RANDFILE
+nor HOME is set.  (Versions up to 0.9.6 used file ".rnd" in the
+current directory in this case, but this has changed with 0.9.6a.)
+
+
+* How do I create certificates or certificate requests?
+
+Check out the CA.pl(1) manual page. This provides a simple wrapper round
+the 'req', 'verify', 'ca' and 'pkcs12' utilities. For finer control check
+out the manual pages for the individual utilities and the certificate
+extensions documentation (currently in doc/openssl.txt).
+
+
+* Why can't I create certificate requests?
+
+You typically get the error:
+
+	unable to find 'distinguished_name' in config
+	problems making Certificate Request
+
+This is because it can't find the configuration file. Check out the
+DIAGNOSTICS section of req(1) for more information.
+
+
+* Why does <SSL program> fail with a certificate verify error?
+
+This problem is usually indicated by log messages saying something like
+"unable to get local issuer certificate" or "self signed certificate".
+When a certificate is verified its root CA must be "trusted" by OpenSSL
+this typically means that the CA certificate must be placed in a directory
+or file and the relevant program configured to read it. The OpenSSL program
+'verify' behaves in a similar way and issues similar error messages: check
+the verify(1) program manual page for more information.
+
+
+* Why can I only use weak ciphers when I connect to a server using OpenSSL?
+
+This is almost certainly because you are using an old "export grade" browser
+which only supports weak encryption. Upgrade your browser to support 128 bit
+ciphers.
+
+
+* How can I create DSA certificates?
+
+Check the CA.pl(1) manual page for a DSA certificate example.
+
+
+* Why can't I make an SSL connection to a server using a DSA certificate?
+
+Typically you'll see a message saying there are no shared ciphers when
+the same setup works fine with an RSA certificate. There are two possible
+causes. The client may not support connections to DSA servers most web
+browsers (including Netscape and MSIE) only support connections to servers
+supporting RSA cipher suites. The other cause is that a set of DH parameters
+has not been supplied to the server. DH parameters can be created with the
+dhparam(1) command and loaded using the SSL_CTX_set_tmp_dh() for example:
+check the source to s_server in apps/s_server.c for an example.
+
+
+* How can I remove the passphrase on a private key?
+
+Firstly you should be really *really* sure you want to do this. Leaving
+a private key unencrypted is a major security risk. If you decide that
+you do have to do this check the EXAMPLES sections of the rsa(1) and
+dsa(1) manual pages.
+
+
+* Why can't I use OpenSSL certificates with SSL client authentication?
+
+What will typically happen is that when a server requests authentication
+it will either not include your certificate or tell you that you have
+no client certificates (Netscape) or present you with an empty list box
+(MSIE). The reason for this is that when a server requests a client
+certificate it includes a list of CAs names which it will accept. Browsers
+will only let you select certificates from the list on the grounds that
+there is little point presenting a certificate which the server will
+reject.
+
+The solution is to add the relevant CA certificate to your servers "trusted
+CA list". How you do this depends on the server sofware in uses. You can
+print out the servers list of acceptable CAs using the OpenSSL s_client tool:
+
+openssl s_client -connect www.some.host:443 -prexit
+
+If your server only requests certificates on certain URLs then you may need
+to manually issue an HTTP GET command to get the list when s_client connects:
+
+GET /some/page/needing/a/certificate.html
+
+If your CA does not appear in the list then this confirms the problem.
+
+
+* Why does my browser give a warning about a mismatched hostname?
+
+Browsers expect the server's hostname to match the value in the commonName
+(CN) field of the certificate. If it does not then you get a warning.
+
+
+[BUILD] =======================================================================
+
 * Why does the linker complain about undefined symbols?
 
 Maybe the compilation was interrupted, and make doesn't notice that
@@ -162,17 +342,99 @@ If none of these helps, you may want to try using the current snapshot.
 If the problem persists, please submit a bug report.
 
 
-* Where can I get a compiled version of OpenSSL?
+* Why does the OpenSSL test fail with "bc: command not found"?
 
-Some applications that use OpenSSL are distributed in binary form.
-When using such an application, you don't need to install OpenSSL
-yourself; the application will include the required parts (e.g. DLLs).
+You didn't install "bc", the Unix calculator.  If you want to run the
+tests, get GNU bc from ftp://ftp.gnu.org or from your OS distributor.
 
-If you want to install OpenSSL on a Windows system and you don't have
-a C compiler, read the "Mingw32" section of INSTALL.W32 for information
-on how to obtain and install the free GNU C compiler.
 
-A number of Linux and *BSD distributions include OpenSSL.
+* Why does the OpenSSL test fail with "bc: 1 no implemented"?
+
+On some SCO installations or versions, bc has a bug that gets triggered
+when you run the test suite (using "make test").  The message returned is
+"bc: 1 not implemented".
+
+The best way to deal with this is to find another implementation of bc
+and compile/install it.  GNU bc (see http://www.gnu.org/software/software.html
+for download instructions) can be safely used, for example.
+
+
+* Why does the OpenSSL compilation fail on Alpha True64 Unix?
+
+On some Alpha installations running True64 Unix and Compaq C, the compilation
+of crypto/sha/sha_dgst.c fails with the message 'Fatal:  Insufficient virtual
+memory to continue compilation.'  As far as the tests have shown, this may be
+a compiler bug.  What happens is that it eats up a lot of resident memory
+to build something, probably a table.  The problem is clearly in the
+optimization code, because if one eliminates optimization completely (-O0),
+the compilation goes through (and the compiler consumes about 2MB of resident
+memory instead of 240MB or whatever one's limit is currently).
+
+There are three options to solve this problem:
+
+1. set your current data segment size soft limit higher.  Experience shows
+that about 241000 kbytes seems to be enough on an AlphaServer DS10.  You do
+this with the command 'ulimit -Sd nnnnnn', where 'nnnnnn' is the number of
+kbytes to set the limit to.
+
+2. If you have a hard limit that is lower than what you need and you can't
+get it changed, you can compile all of OpenSSL with -O0 as optimization
+level.  This is however not a very nice thing to do for those who expect to
+get the best result from OpenSSL.  A bit more complicated solution is the
+following:
+
+----- snip:start -----
+  make DIRS=crypto SDIRS=sha "`grep '^CFLAG=' Makefile.ssl | \
+       sed -e 's/ -O[0-9] / -O0 /'`"
+  rm `ls crypto/*.o crypto/sha/*.o | grep -v 'sha_dgst\.o'`
+  make
+----- snip:end -----
+
+This will only compile sha_dgst.c with -O0, the rest with the optimization
+level chosen by the configuration process.  When the above is done, do the
+test and installation and you're set.
+
+
+* Why does the OpenSSL compilation fail with "ar: command not found"?
+
+Getting this message is quite usual on Solaris 2, because Sun has hidden
+away 'ar' and other development commands in directories that aren't in
+$PATH by default.  One of those directories is '/usr/ccs/bin'.  The
+quickest way to fix this is to do the following (it assumes you use sh
+or any sh-compatible shell):
+
+----- snip:start -----
+  PATH=${PATH}:/usr/ccs/bin; export PATH
+----- snip:end -----
+
+and then redo the compilation.  What you should really do is make sure
+'/usr/ccs/bin' is permanently in your $PATH, for example through your
+'.profile' (again, assuming you use a sh-compatible shell).
+
+
+* Why does the OpenSSL compilation fail on Win32 with VC++?
+
+Sometimes, you may get reports from VC++ command line (cl) that it
+can't find standard include files like stdio.h and other weirdnesses.
+One possible cause is that the environment isn't correctly set up.
+To solve that problem, one should run VCVARS32.BAT which is found in
+the 'bin' subdirectory of the VC++ installation directory (somewhere
+under 'Program Files').  This needs to be done prior to running NMAKE,
+and the changes are only valid for the current DOS session.
+
+
+[PROG] ========================================================================
+
+* Is OpenSSL thread-safe?
+
+Yes (with limitations: an SSL connection may not concurrently be used
+by multiple threads).  On Windows and many Unix systems, OpenSSL
+automatically uses the multi-threaded versions of the standard
+libraries.  If your platform is not one of these, consult the INSTALL
+file.
+
+Multi-threaded applications must provide two callback functions to
+OpenSSL.  This is described in the threads(3) manpage.
 
 
 * I've compiled a program under Windows and it crashes: why?
@@ -259,68 +521,6 @@ is forgetting to load OpenSSL's table of algorithms with
 OpenSSL_add_all_algorithms(). See the manual page for more information.
 
 
-* How do I create certificates or certificate requests?
-
-Check out the CA.pl(1) manual page. This provides a simple wrapper round
-the 'req', 'verify', 'ca' and 'pkcs12' utilities. For finer control check
-out the manual pages for the individual utilities and the certificate
-extensions documentation (currently in doc/openssl.txt).
-
-
-* Why can't I create certificate requests?
-
-You typically get the error:
-
-	unable to find 'distinguished_name' in config
-	problems making Certificate Request
-
-This is because it can't find the configuration file. Check out the
-DIAGNOSTICS section of req(1) for more information.
-
-
-* Why does <SSL program> fail with a certificate verify error?
-
-This problem is usually indicated by log messages saying something like
-"unable to get local issuer certificate" or "self signed certificate".
-When a certificate is verified its root CA must be "trusted" by OpenSSL
-this typically means that the CA certificate must be placed in a directory
-or file and the relevant program configured to read it. The OpenSSL program
-'verify' behaves in a similar way and issues similar error messages: check
-the verify(1) program manual page for more information.
-
-
-* Why can I only use weak ciphers when I connect to a server using OpenSSL?
-
-This is almost certainly because you are using an old "export grade" browser
-which only supports weak encryption. Upgrade your browser to support 128 bit
-ciphers.
-
-
-* How can I create DSA certificates?
-
-Check the CA.pl(1) manual page for a DSA certificate example.
-
-
-* Why can't I make an SSL connection to a server using a DSA certificate?
-
-Typically you'll see a message saying there are no shared ciphers when
-the same setup works fine with an RSA certificate. There are two possible
-causes. The client may not support connections to DSA servers most web
-browsers (including Netscape and MSIE) only support connections to servers
-supporting RSA cipher suites. The other cause is that a set of DH parameters
-has not been supplied to the server. DH parameters can be created with the
-dhparam(1) command and loaded using the SSL_CTX_set_tmp_dh() for example:
-check the source to s_server in apps/s_server.c for an example.
-
-
-* How can I remove the passphrase on a private key?
-
-Firstly you should be really *really* sure you want to do this. Leaving
-a private key unencrypted is a major security risk. If you decide that
-you do have to do this check the EXAMPLES sections of the rsa(1) and
-dsa(1) manual pages.
-
-
 * Why can't the OpenSSH configure script detect OpenSSL?
 
 There is a problem with OpenSSH 1.2.2p1, in that the configure script
@@ -362,71 +562,26 @@ applied to the OpenSSH distribution:
 ----- snip:end -----
 
 
-* Why does the OpenSSL test fail with "bc: command not found"?
+* Can I use OpenSSL's SSL library with non-blocking I/O?
 
-You didn't install "bc", the Unix calculator.  If you want to run the
-tests, get GNU bc from ftp://ftp.gnu.org or from your OS distributor.
+Yes; make sure to read the SSL_get_error(3) manual page!
+
+A pitfall to avoid: Don't assume that SSL_read() will just read from
+the underlying transport or that SSL_write() will just write to it --
+it is also possible that SSL_write() cannot do any useful work until
+there is data to read, or that SSL_read() cannot do anything until it
+is possible to send data.  One reason for this is that the peer may
+request a new TLS/SSL handshake at any time during the protocol,
+requiring a bi-directional message exchange; both SSL_read() and
+SSL_write() will try to continue any pending handshake.
 
 
-* Why does the OpenSSL test fail with "bc: 1 no implemented"?
+* Why doesn't my server application receive a client certificate?
 
-On some SCO installations or versions, bc has a bug that gets triggered when
-you run the test suite (using "make test").  The message returned is "bc:
-1 not implemented".  The best way to deal with this is to find another
-implementation of bc and compile/install it.  For example, GNU bc (see
-http://www.gnu.org/software/software.html for download instructions) can
-be safely used.
+Due to the TLS protocol definition, a client will only send a certificate,
+if explicitely asked by the server. Use the SSL_VERIFY_PEER flag of the
+SSL_CTX_set_verify() function to enable the use of client certificates.
 
 
-* Why does the OpenSSL compilation fail on Alpha True64 Unix?
-
-On some Alpha installations running True64 Unix and Compaq C, the compilation
-of crypto/sha/sha_dgst.c fails with the message 'Fatal:  Insufficient virtual
-memory to continue compilation.'  As far as the tests have shown, this may be
-a compiler bug.  What happens is that it eats up a lot of resident memory
-to build something, probably a table.  The problem is clearly in the
-optimization code, because if one eliminates optimization completely (-O0),
-the compilation goes through (and the compiler consumes about 2MB of resident
-memory instead of 240MB or whatever one's limit is currently).
-
-There are three options to solve this problem:
-
-1. set your current data segment size soft limit higher.  Experience shows
-that about 241000 kbytes seems to be enough on an AlphaServer DS10.  You do
-this with the command 'ulimit -Sd nnnnnn', where 'nnnnnn' is the number of
-kbytes to set the limit to.
-
-2. If you have a hard limit that is lower than what you need and you can't
-get it changed, you can compile all of OpenSSL with -O0 as optimization
-level.  This is however not a very nice thing to do for those who expect to
-get the best result from OpenSSL.  A bit more complicated solution is the
-following:
-
------ snip:start -----
-  make DIRS=crypto SDIRS=sha "`grep '^CFLAG=' Makefile.ssl | \
-       sed -e 's/ -O[0-9] / -O0 /'`"
-  rm `ls crypto/*.o crypto/sha/*.o | grep -v 'sha_dgst\.o'`
-  make
------ snip:end -----
-
-This will only compile sha_dgst.c with -O0, the rest with the optimization
-level chosen by the configuration process.  When the above is done, do the
-test and installation and you're set.
-
-
-* Why does the OpenSSL compilation fail with "ar: command not found"?
-
-Getting this message is quite usual on Solaris 2, because Sun has hidden
-away 'ar' and other development commands in directories that aren't in
-$PATH by default.  One of those directories is '/usr/ccs/bin'.  The
-quickest way to fix this is to do the following (it assumes you use sh
-or any sh-compatible shell):
-
------ snip:start -----
-  PATH=${PATH}:/usr/ccs/bin; export PATH
------ snip:end -----
-
-and then redo the compilation.  What you should really do is make sure
-'/usr/ccs/bin' is permanently in your $PATH, for example through your
-'.profile' (again, assuming you use a sh-compatible shell).
+===============================================================================
 

INSTALL

@@ -7,8 +7,11 @@
 
  To install OpenSSL, you will need:
 
+  * make
   * Perl 5
   * an ANSI C compiler
+  * a development environment in form of development libraries and C
+    header files
   * a supported Unix operating system
 
  Quick Start
@@ -43,9 +46,6 @@
   --openssldir=DIR Directory for OpenSSL files. If no prefix is specified,
                 the library files and binaries are also installed there.
 
-  rsaref        Build with RSADSI's RSAREF toolkit (this assumes that
-                librsaref.a is in the library search path).
-
   no-threads    Don't try to build with support for multi-threaded
                 applications.
 
@@ -125,7 +125,7 @@
      directory, and the binary will be in the "apps" directory.
 
      If "make" fails, look at the output.  There may be reasons for
-     the failure that isn't a problem in OpenSSL itself (like missing
+     the failure that aren't problems in OpenSSL itself (like missing
      standard headers).  If it is a problem with OpenSSL itself, please
      report the problem to <openssl-bugs@openssl.org> (note that your
      message will be forwarded to a public mailing list).  Include the

INSTALL.VMS

@@ -8,6 +8,7 @@ Intro:
 
 This file is divided in the following parts:
 
+  Requirements			- Mandatory reading.
   Checking the distribution	- Mandatory reading.
   Compilation			- Mandatory reading.
   Logical names			- Mandatory reading.
@@ -19,6 +20,15 @@ This file is divided in the following parts:
   TODO				- Things that are to come.
 
 
+Requirements:
+=============
+
+To build and install OpenSSL, you will need:
+
+ * DEC C or some other ANSI C compiler.  VAX C is *not* supported.
+   [Note: OpenSSL has only been tested with DEC C.  Compiling with 
+    a different ANSI C compiler may require some work]
+
 Checking the distribution:
 ==========================
 

Makefile.org

@@ -59,6 +59,7 @@ CFLAG= -DTERMIOS -DL_ENDIAN -fomit-frame-pointer -O3 -m486 -Wall -DSHA1_ASM -DMD
 DEPFLAG= 
 PEX_LIBS= 
 EX_LIBS= 
+EXE_EXT= 
 AR=ar r
 RANLIB= ranlib
 PERL= perl
@@ -201,7 +202,7 @@ sub_all:
 	do \
 	if [ -d "$$i" ]; then \
 		(cd $$i && echo "making all in $$i..." && \
-		$(MAKE) CC='${CC}' PLATFORM='${PLATFORM}' CFLAG='${CFLAG}' SDIRS='$(SDIRS)' INSTALLTOP='${INSTALLTOP}' PEX_LIBS='${PEX_LIBS}' EX_LIBS='${EX_LIBS}' BN_ASM='${BN_ASM}' DES_ENC='${DES_ENC}' BF_ENC='${BF_ENC}' CAST_ENC='${CAST_ENC}' RC4_ENC='${RC4_ENC}' RC5_ENC='${RC5_ENC}' SHA1_ASM_OBJ='${SHA1_ASM_OBJ}' MD5_ASM_OBJ='${MD5_ASM_OBJ}' RMD160_ASM_OBJ='${RMD160_ASM_OBJ}' AR='${AR}' PROCESSOR='${PROCESSOR}' PERL='${PERL}' RANLIB='${RANLIB}' all ) || exit 1; \
+		$(MAKE) CC='${CC}' PLATFORM='${PLATFORM}' CFLAG='${CFLAG}' SDIRS='$(SDIRS)' INSTALLTOP='${INSTALLTOP}' PEX_LIBS='${PEX_LIBS}' EX_LIBS='${EX_LIBS}' BN_ASM='${BN_ASM}' DES_ENC='${DES_ENC}' BF_ENC='${BF_ENC}' CAST_ENC='${CAST_ENC}' RC4_ENC='${RC4_ENC}' RC5_ENC='${RC5_ENC}' SHA1_ASM_OBJ='${SHA1_ASM_OBJ}' MD5_ASM_OBJ='${MD5_ASM_OBJ}' RMD160_ASM_OBJ='${RMD160_ASM_OBJ}' AR='${AR}' PROCESSOR='${PROCESSOR}' PERL='${PERL}' RANLIB='${RANLIB}' EXE_EXT='${EXE_EXT}' all ) || exit 1; \
 	else \
 		$(MAKE) $$i; \
 	fi; \
@@ -250,7 +251,7 @@ link-shared:
 
 build-shared: clean-shared do_$(SHLIB_TARGET) link-shared
 
-do_bsd-gcc-shared: linux-shared
+do_bsd-gcc-shared: do_gnu-shared
 do_linux-shared: do_gnu-shared
 do_gnu-shared:
 	libs='-L. ${SHLIBDEPS}'; for i in ${SHLIBDIRS}; do \
@@ -349,7 +350,7 @@ test:   tests
 
 tests: rehash
 	@(cd test && echo "testing..." && \
-	$(MAKE) CC='${CC}' CFLAG='${CFLAG}' INSTALLTOP='${INSTALLTOP}' PEX_LIBS='${PEX_LIBS}' EX_LIBS='${EX_LIBS}' BN_ASM='${BN_ASM}' DES_ENC='${DES_ENC}' BF_ENC='${BF_ENC}' CAST_ENC='${CAST_ENC}' RC4_ENC='${RC4_ENC}' RC5_ENC='${RC5_ENC}' SDIRS='${SDIRS}' SHA1_ASM_OBJ='${SHA1_ASM_OBJ}' MD5_ASM_OBJ='${MD5_ASM_OBJ}' RMD160_ASM_OBJ='${RMD160_ASM_OBJ}' AR='${AR}' tests );
+	$(MAKE) CC='${CC}' CFLAG='${CFLAG}' INSTALLTOP='${INSTALLTOP}' PEX_LIBS='${PEX_LIBS}' EX_LIBS='${EX_LIBS}' BN_ASM='${BN_ASM}' DES_ENC='${DES_ENC}' BF_ENC='${BF_ENC}' CAST_ENC='${CAST_ENC}' RC4_ENC='${RC4_ENC}' RC5_ENC='${RC5_ENC}' SDIRS='${SDIRS}' SHA1_ASM_OBJ='${SHA1_ASM_OBJ}' MD5_ASM_OBJ='${MD5_ASM_OBJ}' RMD160_ASM_OBJ='${RMD160_ASM_OBJ}' AR='${AR}' EXE_EXT='${EXE_EXT}' tests );
 	@apps/openssl version -a
 
 report:
@@ -440,7 +441,7 @@ install: all install_docs
 	do \
 	if [ -d "$$i" ]; then \
 		(cd $$i; echo "installing $$i..."; \
-		$(MAKE) CC='${CC}' CFLAG='${CFLAG}' INSTALL_PREFIX='${INSTALL_PREFIX}' INSTALLTOP='${INSTALLTOP}' OPENSSLDIR='${OPENSSLDIR}' EX_LIBS='${EX_LIBS}' SDIRS='${SDIRS}' RANLIB='${RANLIB}' install ); \
+		$(MAKE) CC='${CC}' CFLAG='${CFLAG}' INSTALL_PREFIX='${INSTALL_PREFIX}' INSTALLTOP='${INSTALLTOP}' OPENSSLDIR='${OPENSSLDIR}' EX_LIBS='${EX_LIBS}' SDIRS='${SDIRS}' RANLIB='${RANLIB}' EXE_EXT='${EXE_EXT}' install ); \
 	fi; \
 	done
 	@for i in $(LIBS) ;\
@@ -473,19 +474,19 @@ install_docs:
 		$(INSTALL_PREFIX)$(MANDIR)/man3 \
 		$(INSTALL_PREFIX)$(MANDIR)/man5 \
 		$(INSTALL_PREFIX)$(MANDIR)/man7
-	@echo installing man 1 and man 5
 	@for i in doc/apps/*.pod; do \
 		fn=`basename $$i .pod`; \
-		sec=`[ "$$fn" = "config" ] && echo 5 || echo 1`; \
+		if [ "$$fn" = "config" ]; then sec=5; else sec=1; fi; \
+		echo "installing man$$sec/`basename $$i .pod`.$$sec"; \
 		(cd `dirname $$i`; \
 		$(PERL) ../../util/pod2man.pl --section=$$sec --center=OpenSSL \
 			 --release=$(VERSION) `basename $$i`) \
 			>  $(INSTALL_PREFIX)$(MANDIR)/man$$sec/`basename $$i .pod`.$$sec; \
 	done
-	@echo installing man 3 and man 7
 	@for i in doc/crypto/*.pod doc/ssl/*.pod; do \
 		fn=`basename $$i .pod`; \
-		sec=`[ "$$fn" = "des_modes" ] && echo 7 || echo 3`; \
+		if [ "$$fn" = "des_modes" ]; then sec=7; else sec=3; fi; \
+		echo "installing man$$sec/`basename $$i .pod`.$$sec"; \
 		(cd `dirname $$i`; \
 		$(PERL) ../../util/pod2man.pl --section=$$sec --center=OpenSSL \
 			--release=$(VERSION) `basename $$i`) \

NEWS

@@ -5,6 +5,23 @@
   This file gives a brief overview of the major changes between each OpenSSL
   release. For more details please read the CHANGES file.
 
+  Changes between OpenSSL 0.9.6a and OpenSSL 0.9.6b:
+
+      o Security fix: PRNG improvements.
+      o Security fix: RSA OAEP check.
+      o Security fix: Reinsert and fix countermeasure to Bleichbacher's
+        attack.
+      o MIPS bug fix in BIGNUM.
+      o Bug fix in "openssl enc".
+      o Bug fix in X.509 printing routine.
+      o Bug fix in DSA verification routine and DSA S/MIME verification.
+      o Bug fix to make PRNG thread-safe.
+      o Bug fix in RAND_file_name().
+      o Bug fix in compatibility mode trust settings.
+      o Bug fix in blowfish EVP.
+      o Increase default size for BIO buffering filter.
+      o Compatibility fixes in some scripts.
+
   Major changes between OpenSSL 0.9.6 and OpenSSL 0.9.6a:
 
       o Security fix: change behavior of OpenSSL to avoid using

README

@@ -1,7 +1,7 @@
 
- OpenSSL 0.9.6a-beta3 30 Mar 2001
+ OpenSSL 0.9.6b  9 Jul 2001
 
- Copyright (c) 1998-2000 The OpenSSL Project
+ Copyright (c) 1998-2001 The OpenSSL Project
  Copyright (c) 1995-1998 Eric A. Young, Tim J. Hudson
  All rights reserved.
 

STATUS

@@ -1,46 +1,10 @@
 
   OpenSSL STATUS                           Last modified at
-  ______________                           $Date: 2001/03/22 15:15:58 $
+  ______________                           $Date: 2001/04/05 17:42:00 $
 
   DEVELOPMENT STATE
 
-    o  OpenSSL 0.9.6a: Bugfix release -- under development...
-                       Beta 1 released on March 13th, 2001
-	HP-UX 10.20 (hpux-parisc-cc)		- PASSED [normal+engine]
-	HP-UX 10.20 (hpux-parisc-gcc)		- PASSED [normal+engine]
-	HP-UX 11.00 32bit (hpux-parisc-gcc)	- FAILED [engine]
-		"openssl speed rsa1024 -engine cswift" fails unless
-		libswift.sl is renamed to libswift.so.
-		[CORRECTED]
-	HP MPE/iX				- PASSED [presumed normal]
-	Linux 2.2.17 SMP (linux-elf)		- PASSED [normal+engine]
-	Windows (VC-WIN32)			- FAILED [presumed normal]
-		Missing line in ms/32all.bat:
-			perl util\mkfiles.pl >MINFO
-		[CORRECTED]
-		In randfile.c, line 214, signed and unsigned int are mixed.
-		[CORRECTED]
-		In s_client.c and s_server.c, RAND_status() needs to get
-		declared (#include <openssl/rand.h>)
-		[CORRECTED]
-	OpenVMS (any version)			- FAILED [normal+engine]
-		Missing instructions in building script.
-		[CORRECTED]
-	AIX 4.3					- FAILED [engine]
-		Needs -DDSO_DLFCN and -DHAVE_DLFCN_H to work.
-		[CORRECTED] (but will not be automagically configured)
-	Irix 6.5.11				- FAILED [presumed normal]
-		BN_sqr test fails.
-        solaris64-sparcv9-cc (SunOS 5.8)        - PASSED [normal+engine]
-	BSDI 4.0.1 (bsdi-elf-gcc)		- FAILED [engine]
-		Needs -DDSO_DLFCN, -DHAVE_DLFCN_H and -ldl to work.
-		[CORRECTED]
-	mingw32 w/ gcc 2.95.2			- PASSED [presumed normal]
-
-                       Beta 2 released on March 21st, 2001
-	OpenVMS (tested on VMS 7.2-1 for Alpha)	- PASSED [presumed normal]
-        solaris64-sparcv9-cc (SunOS 5.8)        - PASSED [normal]
-
+    o  OpenSSL 0.9.6a: Released on April      5th, 2001
     o  OpenSSL 0.9.6:  Released on September 24th, 2000
     o  OpenSSL 0.9.5a: Released on April      1st, 2000
     o  OpenSSL 0.9.5:  Released on February  28th, 2000

TABLE

@@ -1172,8 +1172,8 @@ $cflags       = -O3 -fomit-frame-pointer
 $unistd       = 
 $thread_cflag = (unknown)
 $lflags       = -lnsl -lsocket
-$bn_ops       = RC4_INDEX
-$bn_obj       = RC4_INDEX DES_UNROLL
+$bn_ops       = RC4_INDEX DES_UNROLL
+$bn_obj       = 
 $des_obj      = 
 $bf_obj       = 
 $md5_obj      = 
@@ -2205,9 +2205,9 @@ $cc           = gcc
 $cflags       = -O3 -fomit-frame-pointer -Dssize_t=int -DNO_SYS_UN_H
 $unistd       = 
 $thread_cflag = (unknown)
-$lflags       = 
-$bn_ops       = -lsocket
-$bn_obj       = BN_LLONG DES_PTR DES_RISC1 DES_UNROLL RC4_INDEX MD2_INT
+$lflags       = -lsocket
+$bn_ops       = BN_LLONG DES_PTR DES_RISC1 DES_UNROLL RC4_INDEX MD2_INT
+$bn_obj       = 
 $des_obj      = 
 $bf_obj       = 
 $md5_obj      = 
@@ -2464,6 +2464,28 @@ $shared_cflag = -fPIC
 $shared_extension = .so.$(SHLIB_MAJOR).$(SHLIB_MINOR)
 $ranlib       = 
 
+*** solaris-x86-cc
+$cc           = cc
+$cflags       = -fast -O -Xa
+$unistd       = 
+$thread_cflag = -D_REENTRANT
+$lflags       = -lsocket -lnsl -ldl
+$bn_ops       = BN_LLONG RC4_CHAR RC4_CHUNK DES_PTR DES_UNROLL BF_PTR
+$bn_obj       = 
+$des_obj      = 
+$bf_obj       = 
+$md5_obj      = 
+$sha1_obj     = 
+$cast_obj     = 
+$rc4_obj      = 
+$rmd160_obj   = 
+$rc5_obj      = 
+$dso_scheme   = dlfcn
+$shared_target= solaris-shared
+$shared_cflag = -KPIC
+$shared_extension = .so.$(SHLIB_MAJOR).$(SHLIB_MINOR)
+$ranlib       = 
+
 *** solaris-x86-gcc
 $cc           = gcc
 $cflags       = -O3 -fomit-frame-pointer -m486 -Wall -DL_ENDIAN -DNO_INLINE_ASM
@@ -2599,10 +2621,10 @@ $ranlib       =
 *** unixware-2.0-pentium
 $cc           = cc
 $cflags       = -DFILIO_H -Kpentium
-$unistd       = -Kthread
-$thread_cflag = -lsocket -lnsl -lx
-$lflags       = MD2_CHAR RC4_INDEX DES_PTR DES_RISC1 DES_UNROLL
-$bn_ops       = 
+$unistd       = 
+$thread_cflag = -Kthread
+$lflags       = -lsocket -lnsl -lx
+$bn_ops       = MD2_CHAR RC4_INDEX DES_PTR DES_RISC1 DES_UNROLL
 $bn_obj       = 
 $des_obj      = 
 $bf_obj       = 
@@ -2690,7 +2712,51 @@ $cflags       = -O -DFILIO_H -Kalloca
 $unistd       = 
 $thread_cflag = -Kthread
 $lflags       = -lsocket -lnsl
-$bn_ops       = MD2_CHAR RC4_INDEX DES_PTR DES_RISC1 DES_UNROLL
+$bn_ops       = BN_LLONG MD2_CHAR RC4_INDEX DES_PTR DES_RISC1 DES_UNROLL
+$bn_obj       = 
+$des_obj      = 
+$bf_obj       = 
+$md5_obj      = 
+$sha1_obj     = 
+$cast_obj     = 
+$rc4_obj      = 
+$rmd160_obj   = 
+$rc5_obj      = 
+$dso_scheme   = 
+$shared_target= 
+$shared_cflag = 
+$shared_extension = 
+$ranlib       = 
+
+*** unixware-7-pentium
+$cc           = cc
+$cflags       = -O -DFILIO_H -Kalloca -Kpentium
+$unistd       = 
+$thread_cflag = -Kthread
+$lflags       = -lsocket -lnsl
+$bn_ops       = BN_LLONG MD2_CHAR RC4_INDEX DES_PTR DES_RISC1 DES_UNROLL
+$bn_obj       = 
+$des_obj      = 
+$bf_obj       = 
+$md5_obj      = 
+$sha1_obj     = 
+$cast_obj     = 
+$rc4_obj      = 
+$rmd160_obj   = 
+$rc5_obj      = 
+$dso_scheme   = 
+$shared_target= 
+$shared_cflag = 
+$shared_extension = 
+$ranlib       = 
+
+*** unixware-7-pentium_pro
+$cc           = cc
+$cflags       = -O -DFILIO_H -Kalloca -Kpentium_pro
+$unistd       = 
+$thread_cflag = -Kthread
+$lflags       = -lsocket -lnsl
+$bn_ops       = BN_LLONG MD2_CHAR RC4_INDEX DES_PTR DES_RISC1 DES_UNROLL
 $bn_obj       = 
 $des_obj      = 
 $bf_obj       = 

apps/Makefile.ssl

@@ -18,6 +18,7 @@ RM=		rm -f
 
 PEX_LIBS=
 EX_LIBS= 
+EXE_EXT= 
 
 CFLAGS= -DMONOLITH $(INCLUDES) $(CFLAG)
 
@@ -32,7 +33,7 @@ PROGRAM= openssl
 
 SCRIPTS=CA.sh CA.pl der_chop
 
-EXE= $(PROGRAM)
+EXE= $(PROGRAM)$(EXE_EXT)
 
 E_EXE=	verify asn1pars req dgst dh dhparam enc passwd gendh errstr \
 	ca crl rsa rsautl dsa dsaparam \
@@ -77,7 +78,7 @@ top:
 
 all:	exe
 
-exe:	$(EXE)
+exe:	$(PROGRAM)
 
 req: sreq.o $(A_OBJ) $(DLIBCRYPTO)
 	$(CC) -o req $(CFLAG) sreq.o $(A_OBJ) $(RAND_OBJ) $(PEX_LIBS) $(LIBCRYPTO) $(EX_LIBS)

apps/ca.c

@@ -1220,7 +1220,11 @@ bad:
 			X509_free(revcert);
 
 			strncpy(buf[0],dbfile,BSIZE-4);
+#ifndef VMS
 			strcat(buf[0],".new");
+#else
+			strcat(buf[0],"-new");
+#endif
 			if (BIO_write_filename(out,buf[0]) <= 0)
 				{
 				perror(dbfile);
@@ -1230,7 +1234,11 @@ bad:
 			j=TXT_DB_write(out,db);
 			if (j <= 0) goto err;
 			strncpy(buf[1],dbfile,BSIZE-4);
+#ifndef VMS
 			strcat(buf[1],".old");
+#else
+			strcat(buf[1],"-old");
+#endif
 			if (rename(dbfile,buf[1]) < 0)
 				{
 				BIO_printf(bio_err,"unable to rename %s to %s\n", dbfile, buf[1]);

apps/dgst.c

@@ -73,7 +73,7 @@
 #undef PROG
 #define PROG	dgst_main
 
-void do_fp(BIO *out, unsigned char *buf, BIO *bp, int sep, char binout,
+void do_fp(BIO *out, unsigned char *buf, BIO *bp, int sep, int binout,
 		EVP_PKEY *key, unsigned char *sigin, int siglen);
 
 int MAIN(int, char **);
@@ -93,7 +93,7 @@ int MAIN(int argc, char **argv)
 	int debug=0;
 	const char *outfile = NULL, *keyfile = NULL;
 	const char *sigfile = NULL, *randfile = NULL;
-	char out_bin = -1, want_pub = 0, do_verify = 0;
+	int out_bin = -1, want_pub = 0, do_verify = 0;
 	EVP_PKEY *sigkey = NULL;
 	unsigned char *sigbuf = NULL;
 	int siglen = 0;
@@ -338,7 +338,7 @@ end:
 	EXIT(err);
 	}
 
-void do_fp(BIO *out, unsigned char *buf, BIO *bp, int sep, char binout,
+void do_fp(BIO *out, unsigned char *buf, BIO *bp, int sep, int binout,
 			EVP_PKEY *key, unsigned char *sigin, int siglen)
 	{
 	int len;

apps/enc.c

@@ -515,6 +515,14 @@ bad:
 			BIO_printf(bio_err,"invalid hex iv value\n");
 			goto end;
 			}
+		if ((hiv == NULL) && (str == NULL))
+			{
+			/* No IV was explicitly set and no IV was generated
+			 * during EVP_BytesToKey. Hence the IV is undefined,
+			 * making correct decryption impossible. */
+			BIO_printf(bio_err, "iv undefined\n");
+			goto end;
+			}
 		if ((hkey != NULL) && !set_hex(hkey,key,24))
 			{
 			BIO_printf(bio_err,"invalid hex key value\n");

apps/s_server.c

@@ -1398,9 +1398,11 @@ static int www_body(char *hostname, int s, unsigned char *context)
 				break;
 				}
 
+#if 0
 			/* append if a directory lookup */
 			if (e[-1] == '/')
 				strcat(p,"index.html");
+#endif
 
 			/* if a directory, do the index thang */
 			if (stat(p,&st_buf) < 0)
@@ -1412,7 +1414,13 @@ static int www_body(char *hostname, int s, unsigned char *context)
 				}
 			if (S_ISDIR(st_buf.st_mode))
 				{
+#if 0 /* must check buffer size */
 				strcat(p,"/index.html");
+#else
+				BIO_puts(io,text);
+				BIO_printf(io,"'%s' is a directory\r\n",p);
+				break;
+#endif
 				}
 
 			if ((file=BIO_new_file(p,"r")) == NULL)

apps/smime.c

@@ -290,6 +290,7 @@ int MAIN(int argc, char **argv)
 		BIO_printf (bio_err, "-text          include or delete text MIME headers\n");
 		BIO_printf (bio_err, "-CApath dir    trusted certificates directory\n");
 		BIO_printf (bio_err, "-CAfile file   trusted certificates file\n");
+		BIO_printf (bio_err, "-passin arg    input file pass phrase source\n");
 		BIO_printf(bio_err,  "-rand file%cfile%c...\n", LIST_SEPARATOR_CHAR, LIST_SEPARATOR_CHAR);
 		BIO_printf(bio_err,  "               load the file (or the files in the directory) into\n");
 		BIO_printf(bio_err,  "               the random number generator\n");

apps/speed.c

@@ -82,12 +82,12 @@
 #include <openssl/rand.h>
 #include <openssl/err.h>
 
-#if defined(__FreeBSD__)
+#if defined(__FreeBSD__) || defined(__NetBSD__) || defined(__OpenBSD__)
 # define USE_TOD
 #elif !defined(MSDOS) && (!defined(VMS) || defined(__DECC))
 # define TIMES
 #endif
-#if !defined(_UNICOS) && !defined(__OpenBSD__) && !defined(sgi) && !defined(__FreeBSD__) && !(defined(__bsdi) || defined(__bsdi__)) && !defined(_AIX) && !defined(MPE)
+#if !defined(_UNICOS) && !defined(__OpenBSD__) && !defined(sgi) && !defined(__FreeBSD__) && !(defined(__bsdi) || defined(__bsdi__)) && !defined(_AIX) && !defined(MPE) && !defined(__NetBSD__)
 # define TIMEB
 #endif
 

crypto/asn1/t_x509.c

@@ -349,6 +349,8 @@ int X509_NAME_print(BIO *bp, X509_NAME *name, int obase)
 	ll=80-2-obase;
 
 	s=X509_NAME_oneline(name,buf,256);
+	if (!*s)
+		return 1;
 	s++; /* skip the first slash */
 
 	l=ll;

crypto/asn1/x_pubkey.c

@@ -234,7 +234,7 @@ EVP_PKEY *X509_PUBKEY_get(X509_PUBKEY *key)
 	a=key->algor;
 	if (ret->type == EVP_PKEY_DSA)
 		{
-		if (a->parameter->type == V_ASN1_SEQUENCE)
+		if (a->parameter && (a->parameter->type == V_ASN1_SEQUENCE))
 			{
 			ret->pkey.dsa->write_params=0;
 			p=a->parameter->value.sequence->data;

crypto/bio/Makefile.ssl

@@ -96,13 +96,13 @@ b_dump.o: ../../include/openssl/lhash.h ../../include/openssl/opensslconf.h
 b_dump.o: ../../include/openssl/opensslv.h ../../include/openssl/safestack.h
 b_dump.o: ../../include/openssl/stack.h ../../include/openssl/symhacks.h
 b_dump.o: ../cryptlib.h
-b_print.o: ../../include/openssl/bio.h ../../include/openssl/buffer.h
-b_print.o: ../../include/openssl/crypto.h ../../include/openssl/e_os.h
-b_print.o: ../../include/openssl/e_os2.h ../../include/openssl/err.h
-b_print.o: ../../include/openssl/lhash.h ../../include/openssl/opensslconf.h
-b_print.o: ../../include/openssl/opensslv.h ../../include/openssl/safestack.h
-b_print.o: ../../include/openssl/stack.h ../../include/openssl/symhacks.h
-b_print.o: ../cryptlib.h
+b_print.o: ../../include/openssl/bio.h ../../include/openssl/bn.h
+b_print.o: ../../include/openssl/buffer.h ../../include/openssl/crypto.h
+b_print.o: ../../include/openssl/e_os.h ../../include/openssl/e_os2.h
+b_print.o: ../../include/openssl/err.h ../../include/openssl/lhash.h
+b_print.o: ../../include/openssl/opensslconf.h ../../include/openssl/opensslv.h
+b_print.o: ../../include/openssl/safestack.h ../../include/openssl/stack.h
+b_print.o: ../../include/openssl/symhacks.h ../cryptlib.h
 b_sock.o: ../../include/openssl/bio.h ../../include/openssl/buffer.h
 b_sock.o: ../../include/openssl/crypto.h ../../include/openssl/e_os.h
 b_sock.o: ../../include/openssl/e_os2.h ../../include/openssl/err.h

crypto/bio/b_print.c

@@ -69,6 +69,7 @@
 #ifndef NO_SYS_TYPES_H
 #include <sys/types.h>
 #endif
+#include <openssl/bn.h>         /* To get BN_LLONG properly defined */
 #include <openssl/bio.h>
 
 #ifdef BN_LLONG
@@ -108,7 +109,11 @@
 #endif
 
 #if HAVE_LONG_LONG
-#define LLONG long long
+# if defined(WIN32) && !defined(__GNUC__)
+# define LLONG _int64
+# else
+# define LLONG long long
+# endif
 #else
 #define LLONG long
 #endif
@@ -151,7 +156,7 @@ static void _dopr(char **sbuffer, char **buffer,
 
 /* some handy macros */
 #define char_to_int(p) (p - '0')
-#define MAX(p,q) ((p >= q) ? p : q)
+#define OSSL_MAX(p,q) ((p >= q) ? p : q)
 
 static void
 _dopr(
@@ -502,13 +507,13 @@ fmtint(
     convert[place] = 0;
 
     zpadlen = max - place;
-    spadlen = min - MAX(max, place) - (signvalue ? 1 : 0);
+    spadlen = min - OSSL_MAX(max, place) - (signvalue ? 1 : 0);
     if (zpadlen < 0)
         zpadlen = 0;
     if (spadlen < 0)
         spadlen = 0;
     if (flags & DP_F_ZERO) {
-        zpadlen = MAX(zpadlen, spadlen);
+        zpadlen = OSSL_MAX(zpadlen, spadlen);
         spadlen = 0;
     }
     if (flags & DP_F_MINUS)
@@ -640,7 +645,7 @@ fmtfp(
             (caps ? "0123456789ABCDEF"
               : "0123456789abcdef")[fracpart % 10];
         fracpart = (fracpart / 10);
-    } while (fracpart && (fplace < 20));
+    } while (fplace < max);
     if (fplace == 20)
         fplace--;
     fconvert[fplace] = 0;

crypto/bio/bf_buff.c

@@ -70,7 +70,7 @@ static long buffer_ctrl(BIO *h, int cmd, long arg1, void *arg2);
 static int buffer_new(BIO *h);
 static int buffer_free(BIO *data);
 static long buffer_callback_ctrl(BIO *h, int cmd, bio_info_cb *fp);
-#define DEFAULT_BUFFER_SIZE	1024
+#define DEFAULT_BUFFER_SIZE	4096
 
 static BIO_METHOD methods_buffer=
 	{

crypto/bn/asm/mips3.s

@@ -1,5 +1,5 @@
 .rdata
-.asciiz "mips3.s, Version 1.0"
+.asciiz	"mips3.s, Version 1.1"
 .asciiz	"MIPS III/IV ISA artwork by Andy Polyakov <appro@fy.chalmers.se>"
 
 /*
@@ -849,6 +849,7 @@ LEAF(bn_mul_comba8)
 	sltu	AT,c_1,t_1
 	daddu	t_2,AT
 	daddu	c_2,t_2
+	sltu	c_3,c_2,t_2
 	dmultu	a_1,b_2		/* mul_add_c(a[1],b[2],c1,c2,c3); */
 	mflo	t_1
 	mfhi	t_2
@@ -856,7 +857,8 @@ LEAF(bn_mul_comba8)
 	sltu	AT,c_1,t_1
 	daddu	t_2,AT
 	daddu	c_2,t_2
-	sltu	c_3,c_2,t_2
+	sltu	AT,c_2,t_2
+	daddu	c_3,AT
 	dmultu	a_2,b_1		/* mul_add_c(a[2],b[1],c1,c2,c3); */
 	mflo	t_1
 	mfhi	t_2
@@ -884,6 +886,7 @@ LEAF(bn_mul_comba8)
 	sltu	AT,c_2,t_1
 	daddu	t_2,AT
 	daddu	c_3,t_2
+	sltu	c_1,c_3,t_2
 	dmultu	a_3,b_1		/* mul_add_c(a[3],b[1],c2,c3,c1); */
 	mflo	t_1
 	mfhi	t_2
@@ -891,7 +894,8 @@ LEAF(bn_mul_comba8)
 	sltu	AT,c_2,t_1
 	daddu	t_2,AT
 	daddu	c_3,t_2
-	sltu	c_1,c_3,t_2
+	sltu	AT,c_3,t_2
+	daddu	c_1,AT
 	dmultu	a_2,b_2		/* mul_add_c(a[2],b[2],c2,c3,c1); */
 	mflo	t_1
 	mfhi	t_2
@@ -928,6 +932,7 @@ LEAF(bn_mul_comba8)
 	sltu	AT,c_3,t_1
 	daddu	t_2,AT
 	daddu	c_1,t_2
+	sltu	c_2,c_1,t_2
 	dmultu	a_1,b_4		/* mul_add_c(a[1],b[4],c3,c1,c2); */
 	mflo	t_1
 	mfhi	t_2
@@ -935,7 +940,8 @@ LEAF(bn_mul_comba8)
 	sltu	AT,c_3,t_1
 	daddu	t_2,AT
 	daddu	c_1,t_2
-	sltu	c_2,c_1,t_2
+	sltu	AT,c_1,t_2
+	daddu	c_2,AT
 	dmultu	a_2,b_3		/* mul_add_c(a[2],b[3],c3,c1,c2); */
 	mflo	t_1
 	mfhi	t_2
@@ -981,6 +987,7 @@ LEAF(bn_mul_comba8)
 	sltu	AT,c_1,t_1
 	daddu	t_2,AT
 	daddu	c_2,t_2
+	sltu	c_3,c_2,t_2
 	dmultu	a_5,b_1		/* mul_add_c(a[5],b[1],c1,c2,c3); */
 	mflo	t_1
 	mfhi	t_2
@@ -988,7 +995,8 @@ LEAF(bn_mul_comba8)
 	sltu	AT,c_1,t_1
 	daddu	t_2,AT
 	daddu	c_2,t_2
-	sltu	c_3,c_2,t_2
+	sltu	AT,c_2,t_2
+	daddu	c_3,AT
 	dmultu	a_4,b_2		/* mul_add_c(a[4],b[2],c1,c2,c3); */
 	mflo	t_1
 	mfhi	t_2
@@ -1043,6 +1051,7 @@ LEAF(bn_mul_comba8)
 	sltu	AT,c_2,t_1
 	daddu	t_2,AT
 	daddu	c_3,t_2
+	sltu	c_1,c_3,t_2
 	dmultu	a_1,b_6		/* mul_add_c(a[1],b[6],c2,c3,c1); */
 	mflo	t_1
 	mfhi	t_2
@@ -1050,7 +1059,8 @@ LEAF(bn_mul_comba8)
 	sltu	AT,c_2,t_1
 	daddu	t_2,AT
 	daddu	c_3,t_2
-	sltu	c_1,c_3,t_2
+	sltu	AT,c_3,t_2
+	daddu	c_1,AT
 	dmultu	a_2,b_5		/* mul_add_c(a[2],b[5],c2,c3,c1); */
 	mflo	t_1
 	mfhi	t_2
@@ -1114,6 +1124,7 @@ LEAF(bn_mul_comba8)
 	sltu	AT,c_3,t_1
 	daddu	t_2,AT
 	daddu	c_1,t_2
+	sltu	c_2,c_1,t_2
 	dmultu	a_6,b_2		/* mul_add_c(a[6],b[2],c3,c1,c2); */
 	mflo	t_1
 	mfhi	t_2
@@ -1121,7 +1132,8 @@ LEAF(bn_mul_comba8)
 	sltu	AT,c_3,t_1
 	daddu	t_2,AT
 	daddu	c_1,t_2
-	sltu	c_2,c_1,t_2
+	sltu	AT,c_1,t_2
+	daddu	c_2,AT
 	dmultu	a_5,b_3		/* mul_add_c(a[5],b[3],c3,c1,c2); */
 	mflo	t_1
 	mfhi	t_2
@@ -1176,6 +1188,7 @@ LEAF(bn_mul_comba8)
 	sltu	AT,c_1,t_1
 	daddu	t_2,AT
 	daddu	c_2,t_2
+	sltu	c_3,c_2,t_2
 	dmultu	a_3,b_6		/* mul_add_c(a[3],b[6],c1,c2,c3); */
 	mflo	t_1
 	mfhi	t_2
@@ -1183,7 +1196,8 @@ LEAF(bn_mul_comba8)
 	sltu	AT,c_1,t_1
 	daddu	t_2,AT
 	daddu	c_2,t_2
-	sltu	c_3,c_2,t_2
+	sltu	AT,c_2,t_2
+	daddu	c_3,AT
 	dmultu	a_4,b_5		/* mul_add_c(a[4],b[5],c1,c2,c3); */
 	mflo	t_1
 	mfhi	t_2
@@ -1229,6 +1243,7 @@ LEAF(bn_mul_comba8)
 	sltu	AT,c_2,t_1
 	daddu	t_2,AT
 	daddu	c_3,t_2
+	sltu	c_1,c_3,t_2
 	dmultu	a_6,b_4		/* mul_add_c(a[6],b[4],c2,c3,c1); */
 	mflo	t_1
 	mfhi	t_2
@@ -1236,7 +1251,8 @@ LEAF(bn_mul_comba8)
 	sltu	AT,c_2,t_1
 	daddu	t_2,AT
 	daddu	c_3,t_2
-	sltu	c_1,c_3,t_2
+	sltu	AT,c_3,t_2
+	daddu	c_1,AT
 	dmultu	a_5,b_5		/* mul_add_c(a[5],b[5],c2,c3,c1); */
 	mflo	t_1
 	mfhi	t_2
@@ -1273,6 +1289,7 @@ LEAF(bn_mul_comba8)
 	sltu	AT,c_3,t_1
 	daddu	t_2,AT
 	daddu	c_1,t_2
+	sltu	c_2,c_1,t_2
 	dmultu	a_5,b_6		/* mul_add_c(a[5],b[6],c3,c1,c2); */
 	mflo	t_1
 	mfhi	t_2
@@ -1280,7 +1297,8 @@ LEAF(bn_mul_comba8)
 	sltu	AT,c_3,t_1
 	daddu	t_2,AT
 	daddu	c_1,t_2
-	sltu	c_2,c_1,t_2
+	sltu	AT,c_1,t_2
+	daddu	c_2,AT
 	dmultu	a_6,b_5		/* mul_add_c(a[6],b[5],c3,c1,c2); */
 	mflo	t_1
 	mfhi	t_2
@@ -1308,6 +1326,7 @@ LEAF(bn_mul_comba8)
 	sltu	AT,c_1,t_1
 	daddu	t_2,AT
 	daddu	c_2,t_2
+	sltu	c_3,c_2,t_2
 	dmultu	a_6,b_6		/* mul_add_c(a[6],b[6],c1,c2,c3); */
 	mflo	t_1
 	mfhi	t_2
@@ -1315,7 +1334,8 @@ LEAF(bn_mul_comba8)
 	sltu	AT,c_1,t_1
 	daddu	t_2,AT
 	daddu	c_2,t_2
-	sltu	c_3,c_2,t_2
+	sltu	AT,c_2,t_2
+	daddu	c_3,AT
 	dmultu	a_5,b_7		/* mul_add_c(a[5],b[7],c1,c2,c3); */
 	mflo	t_1
 	mfhi	t_2
@@ -1334,6 +1354,7 @@ LEAF(bn_mul_comba8)
 	sltu	AT,c_2,t_1
 	daddu	t_2,AT
 	daddu	c_3,t_2
+	sltu	c_1,c_3,t_2
 	dmultu	a_7,b_6		/* mul_add_c(a[7],b[6],c2,c3,c1); */
 	mflo	t_1
 	mfhi	t_2
@@ -1341,7 +1362,8 @@ LEAF(bn_mul_comba8)
 	sltu	AT,c_2,t_1
 	daddu	t_2,AT
 	daddu	c_3,t_2
-	sltu	c_1,c_3,t_2
+	sltu	AT,c_3,t_2
+	daddu	c_1,AT
 	sd	c_2,104(a0)	/* r[13]=c2; */
 
 	dmultu	a_7,b_7		/* mul_add_c(a[7],b[7],c3,c1,c2); */
@@ -1430,6 +1452,7 @@ LEAF(bn_mul_comba4)
 	sltu	AT,c_1,t_1
 	daddu	t_2,AT
 	daddu	c_2,t_2
+	sltu	c_3,c_2,t_2
 	dmultu	a_1,b_2		/* mul_add_c(a[1],b[2],c1,c2,c3); */
 	mflo	t_1
 	mfhi	t_2
@@ -1437,7 +1460,8 @@ LEAF(bn_mul_comba4)
 	sltu	AT,c_1,t_1
 	daddu	t_2,AT
 	daddu	c_2,t_2
-	sltu	c_3,c_2,t_2
+	sltu	AT,c_2,t_2
+	daddu	c_3,AT
 	dmultu	a_2,b_1		/* mul_add_c(a[2],b[1],c1,c2,c3); */
 	mflo	t_1
 	mfhi	t_2
@@ -1465,6 +1489,7 @@ LEAF(bn_mul_comba4)
 	sltu	AT,c_2,t_1
 	daddu	t_2,AT
 	daddu	c_3,t_2
+	sltu	c_1,c_3,t_2
 	dmultu	a_2,b_2		/* mul_add_c(a[2],b[2],c2,c3,c1); */
 	mflo	t_1
 	mfhi	t_2
@@ -1472,7 +1497,8 @@ LEAF(bn_mul_comba4)
 	sltu	AT,c_2,t_1
 	daddu	t_2,AT
 	daddu	c_3,t_2
-	sltu	c_1,c_3,t_2
+	sltu	AT,c_3,t_2
+	daddu	c_1,AT
 	dmultu	a_1,b_3		/* mul_add_c(a[1],b[3],c2,c3,c1); */
 	mflo	t_1
 	mfhi	t_2
@@ -1491,6 +1517,7 @@ LEAF(bn_mul_comba4)
 	sltu	AT,c_3,t_1
 	daddu	t_2,AT
 	daddu	c_1,t_2
+	sltu	c_2,c_1,t_2
 	dmultu	a_3,b_2		/* mul_add_c(a[3],b[2],c3,c1,c2); */
 	mflo	t_1
 	mfhi	t_2
@@ -1498,7 +1525,8 @@ LEAF(bn_mul_comba4)
 	sltu	AT,c_3,t_1
 	daddu	t_2,AT
 	daddu	c_1,t_2
-	sltu	c_2,c_1,t_2
+	sltu	AT,c_1,t_2
+	daddu	c_2,AT
 	sd	c_3,40(a0)
 
 	dmultu	a_3,b_3		/* mul_add_c(a[3],b[3],c1,c2,c3); */
@@ -1543,28 +1571,30 @@ LEAF(bn_sqr_comba8)
 	dmultu	a_0,a_1		/* mul_add_c2(a[0],b[1],c2,c3,c1); */
 	mflo	t_1
 	mfhi	t_2
+	slt	c_1,t_2,zero
+	dsll	t_2,1
+	slt	a2,t_1,zero
+	daddu	t_2,a2
+	dsll	t_1,1
 	daddu	c_2,t_1
 	sltu	AT,c_2,t_1
 	daddu	c_3,t_2,AT
-	daddu	c_2,t_1
-	sltu	AT,c_2,t_1
-	daddu	t_2,AT
-	daddu	c_3,t_2
-	sltu	c_1,c_3,t_2
 	sd	c_2,8(a0)
 
 	dmultu	a_2,a_0		/* mul_add_c2(a[2],b[0],c3,c1,c2); */
 	mflo	t_1
 	mfhi	t_2
-	daddu	c_3,t_1
-	sltu	AT,c_3,t_1
-	daddu	a2,t_2,AT
-	daddu	c_1,a2
+	slt	c_2,t_2,zero
+	dsll	t_2,1
+	slt	a2,t_1,zero
+	daddu	t_2,a2
+	dsll	t_1,1
 	daddu	c_3,t_1
 	sltu	AT,c_3,t_1
 	daddu	t_2,AT
 	daddu	c_1,t_2
-	sltu	c_2,c_1,t_2
+	sltu	AT,c_1,t_2
+	daddu	c_2,AT
 	dmultu	a_1,a_1		/* mul_add_c(a[1],b[1],c3,c1,c2); */
 	mflo	t_1
 	mfhi	t_2
@@ -1579,24 +1609,26 @@ LEAF(bn_sqr_comba8)
 	dmultu	a_0,a_3		/* mul_add_c2(a[0],b[3],c1,c2,c3); */
 	mflo	t_1
 	mfhi	t_2
-	daddu	c_1,t_1
-	sltu	AT,c_1,t_1
-	daddu	a2,t_2,AT
-	daddu	c_2,a2
+	slt	c_3,t_2,zero
+	dsll	t_2,1
+	slt	a2,t_1,zero
+	daddu	t_2,a2
+	dsll	t_1,1
 	daddu	c_1,t_1
 	sltu	AT,c_1,t_1
 	daddu	t_2,AT
 	daddu	c_2,t_2
-	sltu	c_3,c_2,t_2
+	sltu	AT,c_2,t_2
+	daddu	c_3,AT
 	dmultu	a_1,a_2		/* mul_add_c2(a[1],b[2],c1,c2,c3); */
 	mflo	t_1
 	mfhi	t_2
-	daddu	c_1,t_1
-	sltu	AT,c_1,t_1
-	daddu	a2,t_2,AT
-	daddu	c_2,a2
-	sltu	AT,c_2,a2
+	slt	AT,t_2,zero
 	daddu	c_3,AT
+	dsll	t_2,1
+	slt	a2,t_1,zero
+	daddu	t_2,a2
+	dsll	t_1,1
 	daddu	c_1,t_1
 	sltu	AT,c_1,t_1
 	daddu	t_2,AT
@@ -1608,24 +1640,26 @@ LEAF(bn_sqr_comba8)
 	dmultu	a_4,a_0		/* mul_add_c2(a[4],b[0],c2,c3,c1); */
 	mflo	t_1
 	mfhi	t_2
-	daddu	c_2,t_1
-	sltu	AT,c_2,t_1
-	daddu	a2,t_2,AT
-	daddu	c_3,a2
+	slt	c_1,t_2,zero
+	dsll	t_2,1
+	slt	a2,t_1,zero
+	daddu	t_2,a2
+	dsll	t_1,1
 	daddu	c_2,t_1
 	sltu	AT,c_2,t_1
 	daddu	t_2,AT
 	daddu	c_3,t_2
-	sltu	c_1,c_3,t_2
+	sltu	AT,c_3,t_2
+	daddu	c_1,AT
 	dmultu	a_3,a_1		/* mul_add_c2(a[3],b[1],c2,c3,c1); */
 	mflo	t_1
 	mfhi	t_2
-	daddu	c_2,t_1
-	sltu	AT,c_2,t_1
-	daddu	a2,t_2,AT
-	daddu	c_3,a2
-	sltu	AT,c_3,a2
+	slt	AT,t_2,zero
 	daddu	c_1,AT
+	dsll	t_2,1
+	slt	a2,t_1,zero
+	daddu	t_2,a2
+	dsll	t_1,1
 	daddu	c_2,t_1
 	sltu	AT,c_2,t_1
 	daddu	t_2,AT
@@ -1646,24 +1680,26 @@ LEAF(bn_sqr_comba8)
 	dmultu	a_0,a_5		/* mul_add_c2(a[0],b[5],c3,c1,c2); */
 	mflo	t_1
 	mfhi	t_2
-	daddu	c_3,t_1
-	sltu	AT,c_3,t_1
-	daddu	a2,t_2,AT
-	daddu	c_1,a2
+	slt	c_2,t_2,zero
+	dsll	t_2,1
+	slt	a2,t_1,zero
+	daddu	t_2,a2
+	dsll	t_1,1
 	daddu	c_3,t_1
 	sltu	AT,c_3,t_1
 	daddu	t_2,AT
 	daddu	c_1,t_2
-	sltu	c_2,c_1,t_2
+	sltu	AT,c_1,t_2
+	daddu	c_2,AT
 	dmultu	a_1,a_4		/* mul_add_c2(a[1],b[4],c3,c1,c2); */
 	mflo	t_1
 	mfhi	t_2
-	daddu	c_3,t_1
-	sltu	AT,c_3,t_1
-	daddu	a2,t_2,AT
-	daddu	c_1,a2
-	sltu	AT,c_1,a2
+	slt	AT,t_2,zero
 	daddu	c_2,AT
+	dsll	t_2,1
+	slt	a2,t_1,zero
+	daddu	t_2,a2
+	dsll	t_1,1
 	daddu	c_3,t_1
 	sltu	AT,c_3,t_1
 	daddu	t_2,AT
@@ -1673,12 +1709,12 @@ LEAF(bn_sqr_comba8)
 	dmultu	a_2,a_3		/* mul_add_c2(a[2],b[3],c3,c1,c2); */
 	mflo	t_1
 	mfhi	t_2
-	daddu	c_3,t_1
-	sltu	AT,c_3,t_1
-	daddu	a2,t_2,AT
-	daddu	c_1,a2
-	sltu	AT,c_1,a2
+	slt	AT,t_2,zero
 	daddu	c_2,AT
+	dsll	t_2,1
+	slt	a2,t_1,zero
+	daddu	t_2,a2
+	dsll	t_1,1
 	daddu	c_3,t_1
 	sltu	AT,c_3,t_1
 	daddu	t_2,AT
@@ -1690,24 +1726,26 @@ LEAF(bn_sqr_comba8)
 	dmultu	a_6,a_0		/* mul_add_c2(a[6],b[0],c1,c2,c3); */
 	mflo	t_1
 	mfhi	t_2
-	daddu	c_1,t_1
-	sltu	AT,c_1,t_1
-	daddu	a2,t_2,AT
-	daddu	c_2,a2
+	slt	c_3,t_2,zero
+	dsll	t_2,1
+	slt	a2,t_1,zero
+	daddu	t_2,a2
+	dsll	t_1,1
 	daddu	c_1,t_1
 	sltu	AT,c_1,t_1
 	daddu	t_2,AT
 	daddu	c_2,t_2
-	sltu	c_3,c_2,t_2
+	sltu	AT,c_2,t_2
+	daddu	c_3,AT
 	dmultu	a_5,a_1		/* mul_add_c2(a[5],b[1],c1,c2,c3); */
 	mflo	t_1
 	mfhi	t_2
-	daddu	c_1,t_1
-	sltu	AT,c_1,t_1
-	daddu	a2,t_2,AT
-	daddu	c_2,a2
-	sltu	AT,c_2,a2
+	slt	AT,t_2,zero
 	daddu	c_3,AT
+	dsll	t_2,1
+	slt	a2,t_1,zero
+	daddu	t_2,a2
+	dsll	t_1,1
 	daddu	c_1,t_1
 	sltu	AT,c_1,t_1
 	daddu	t_2,AT
@@ -1717,12 +1755,12 @@ LEAF(bn_sqr_comba8)
 	dmultu	a_4,a_2		/* mul_add_c2(a[4],b[2],c1,c2,c3); */
 	mflo	t_1
 	mfhi	t_2
-	daddu	c_1,t_1
-	sltu	AT,c_1,t_1
-	daddu	a2,t_2,AT
-	daddu	c_2,a2
-	sltu	AT,c_2,a2
+	slt	AT,t_2,zero
 	daddu	c_3,AT
+	dsll	t_2,1
+	slt	a2,t_1,zero
+	daddu	t_2,a2
+	dsll	t_1,1
 	daddu	c_1,t_1
 	sltu	AT,c_1,t_1
 	daddu	t_2,AT
@@ -1743,24 +1781,26 @@ LEAF(bn_sqr_comba8)
 	dmultu	a_0,a_7		/* mul_add_c2(a[0],b[7],c2,c3,c1); */
 	mflo	t_1
 	mfhi	t_2
-	daddu	c_2,t_1
-	sltu	AT,c_2,t_1
-	daddu	a2,t_2,AT
-	daddu	c_3,a2
+	slt	c_1,t_2,zero
+	dsll	t_2,1
+	slt	a2,t_1,zero
+	daddu	t_2,a2
+	dsll	t_1,1
 	daddu	c_2,t_1
 	sltu	AT,c_2,t_1
 	daddu	t_2,AT
 	daddu	c_3,t_2
-	sltu	c_1,c_3,t_2
+	sltu	AT,c_3,t_2
+	daddu	c_1,AT
 	dmultu	a_1,a_6		/* mul_add_c2(a[1],b[6],c2,c3,c1); */
 	mflo	t_1
 	mfhi	t_2
-	daddu	c_2,t_1
-	sltu	AT,c_2,t_1
-	daddu	a2,t_2,AT
-	daddu	c_3,a2
-	sltu	AT,c_3,a2
+	slt	AT,t_2,zero
 	daddu	c_1,AT
+	dsll	t_2,1
+	slt	a2,t_1,zero
+	daddu	t_2,a2
+	dsll	t_1,1
 	daddu	c_2,t_1
 	sltu	AT,c_2,t_1
 	daddu	t_2,AT
@@ -1770,12 +1810,12 @@ LEAF(bn_sqr_comba8)
 	dmultu	a_2,a_5		/* mul_add_c2(a[2],b[5],c2,c3,c1); */
 	mflo	t_1
 	mfhi	t_2
-	daddu	c_2,t_1
-	sltu	AT,c_2,t_1
-	daddu	a2,t_2,AT
-	daddu	c_3,a2
-	sltu	AT,c_3,a2
+	slt	AT,t_2,zero
 	daddu	c_1,AT
+	dsll	t_2,1
+	slt	a2,t_1,zero
+	daddu	t_2,a2
+	dsll	t_1,1
 	daddu	c_2,t_1
 	sltu	AT,c_2,t_1
 	daddu	t_2,AT
@@ -1785,12 +1825,12 @@ LEAF(bn_sqr_comba8)
 	dmultu	a_3,a_4		/* mul_add_c2(a[3],b[4],c2,c3,c1); */
 	mflo	t_1
 	mfhi	t_2
-	daddu	c_2,t_1
-	sltu	AT,c_2,t_1
-	daddu	a2,t_2,AT
-	daddu	c_3,a2
-	sltu	AT,c_3,a2
+	slt	AT,t_2,zero
 	daddu	c_1,AT
+	dsll	t_2,1
+	slt	a2,t_1,zero
+	daddu	t_2,a2
+	dsll	t_1,1
 	daddu	c_2,t_1
 	sltu	AT,c_2,t_1
 	daddu	t_2,AT
@@ -1802,24 +1842,26 @@ LEAF(bn_sqr_comba8)
 	dmultu	a_7,a_1		/* mul_add_c2(a[7],b[1],c3,c1,c2); */
 	mflo	t_1
 	mfhi	t_2
-	daddu	c_3,t_1
-	sltu	AT,c_3,t_1
-	daddu	a2,t_2,AT
-	daddu	c_1,a2
+	slt	c_2,t_2,zero
+	dsll	t_2,1
+	slt	a2,t_1,zero
+	daddu	t_2,a2
+	dsll	t_1,1
 	daddu	c_3,t_1
 	sltu	AT,c_3,t_1
 	daddu	t_2,AT
 	daddu	c_1,t_2
-	sltu	c_2,c_1,t_2
+	sltu	AT,c_1,t_2
+	daddu	c_2,AT
 	dmultu	a_6,a_2		/* mul_add_c2(a[6],b[2],c3,c1,c2); */
 	mflo	t_1
 	mfhi	t_2
-	daddu	c_3,t_1
-	sltu	AT,c_3,t_1
-	daddu	a2,t_2,AT
-	daddu	c_1,a2
-	sltu	AT,c_1,a2
+	slt	AT,t_2,zero
 	daddu	c_2,AT
+	dsll	t_2,1
+	slt	a2,t_1,zero
+	daddu	t_2,a2
+	dsll	t_1,1
 	daddu	c_3,t_1
 	sltu	AT,c_3,t_1
 	daddu	t_2,AT
@@ -1829,12 +1871,12 @@ LEAF(bn_sqr_comba8)
 	dmultu	a_5,a_3		/* mul_add_c2(a[5],b[3],c3,c1,c2); */
 	mflo	t_1
 	mfhi	t_2
-	daddu	c_3,t_1
-	sltu	AT,c_3,t_1
-	daddu	a2,t_2,AT
-	daddu	c_1,a2
-	sltu	AT,c_1,a2
+	slt	AT,t_2,zero
 	daddu	c_2,AT
+	dsll	t_2,1
+	slt	a2,t_1,zero
+	daddu	t_2,a2
+	dsll	t_1,1
 	daddu	c_3,t_1
 	sltu	AT,c_3,t_1
 	daddu	t_2,AT
@@ -1855,24 +1897,26 @@ LEAF(bn_sqr_comba8)
 	dmultu	a_2,a_7		/* mul_add_c2(a[2],b[7],c1,c2,c3); */
 	mflo	t_1
 	mfhi	t_2
-	daddu	c_1,t_1
-	sltu	AT,c_1,t_1
-	daddu	a2,t_2,AT
-	daddu	c_2,a2
+	slt	c_3,t_2,zero
+	dsll	t_2,1
+	slt	a2,t_1,zero
+	daddu	t_2,a2
+	dsll	t_1,1
 	daddu	c_1,t_1
 	sltu	AT,c_1,t_1
 	daddu	t_2,AT
 	daddu	c_2,t_2
-	sltu	c_3,c_2,t_2
+	sltu	AT,c_2,t_2
+	daddu	c_3,AT
 	dmultu	a_3,a_6		/* mul_add_c2(a[3],b[6],c1,c2,c3); */
 	mflo	t_1
 	mfhi	t_2
-	daddu	c_1,t_1
-	sltu	AT,c_1,t_1
-	daddu	a2,t_2,AT
-	daddu	c_2,a2
-	sltu	AT,c_2,a2
+	slt	AT,t_2,zero
 	daddu	c_3,AT
+	dsll	t_2,1
+	slt	a2,t_1,zero
+	daddu	t_2,a2
+	dsll	t_1,1
 	daddu	c_1,t_1
 	sltu	AT,c_1,t_1
 	daddu	t_2,AT
@@ -1882,12 +1926,12 @@ LEAF(bn_sqr_comba8)
 	dmultu	a_4,a_5		/* mul_add_c2(a[4],b[5],c1,c2,c3); */
 	mflo	t_1
 	mfhi	t_2
-	daddu	c_1,t_1
-	sltu	AT,c_1,t_1
-	daddu	a2,t_2,AT
-	daddu	c_2,a2
-	sltu	AT,c_2,a2
+	slt	AT,t_2,zero
 	daddu	c_3,AT
+	dsll	t_2,1
+	slt	a2,t_1,zero
+	daddu	t_2,a2
+	dsll	t_1,1
 	daddu	c_1,t_1
 	sltu	AT,c_1,t_1
 	daddu	t_2,AT
@@ -1899,24 +1943,26 @@ LEAF(bn_sqr_comba8)
 	dmultu	a_7,a_3		/* mul_add_c2(a[7],b[3],c2,c3,c1); */
 	mflo	t_1
 	mfhi	t_2
-	daddu	c_2,t_1
-	sltu	AT,c_2,t_1
-	daddu	a2,t_2,AT
-	daddu	c_3,a2
+	slt	c_1,t_2,zero
+	dsll	t_2,1
+	slt	a2,t_1,zero
+	daddu	t_2,a2
+	dsll	t_1,1
 	daddu	c_2,t_1
 	sltu	AT,c_2,t_1
 	daddu	t_2,AT
 	daddu	c_3,t_2
-	sltu	c_1,c_3,t_2
+	sltu	AT,c_3,t_2
+	daddu	c_1,AT
 	dmultu	a_6,a_4		/* mul_add_c2(a[6],b[4],c2,c3,c1); */
 	mflo	t_1
 	mfhi	t_2
-	daddu	c_2,t_1
-	sltu	AT,c_2,t_1
-	daddu	a2,t_2,AT
-	daddu	c_3,a2
-	sltu	AT,c_3,a2
+	slt	AT,t_2,zero
 	daddu	c_1,AT
+	dsll	t_2,1
+	slt	a2,t_1,zero
+	daddu	t_2,a2
+	dsll	t_1,1
 	daddu	c_2,t_1
 	sltu	AT,c_2,t_1
 	daddu	t_2,AT
@@ -1937,24 +1983,26 @@ LEAF(bn_sqr_comba8)
 	dmultu	a_4,a_7		/* mul_add_c2(a[4],b[7],c3,c1,c2); */
 	mflo	t_1
 	mfhi	t_2
-	daddu	c_3,t_1
-	sltu	AT,c_3,t_1
-	daddu	a2,t_2,AT
-	daddu	c_1,a2
+	slt	c_2,t_2,zero
+	dsll	t_2,1
+	slt	a2,t_1,zero
+	daddu	t_2,a2
+	dsll	t_1,1
 	daddu	c_3,t_1
 	sltu	AT,c_3,t_1
 	daddu	t_2,AT
 	daddu	c_1,t_2
-	sltu	c_2,c_1,t_2
+	sltu	AT,c_1,t_2
+	daddu	c_2,AT
 	dmultu	a_5,a_6		/* mul_add_c2(a[5],b[6],c3,c1,c2); */
 	mflo	t_1
 	mfhi	t_2
-	daddu	c_3,t_1
-	sltu	AT,c_3,t_1
-	daddu	a2,t_2,AT
-	daddu	c_1,a2
-	sltu	AT,c_1,a2
+	slt	AT,t_2,zero
 	daddu	c_2,AT
+	dsll	t_2,1
+	slt	a2,t_1,zero
+	daddu	t_2,a2
+	dsll	t_1,1
 	daddu	c_3,t_1
 	sltu	AT,c_3,t_1
 	daddu	t_2,AT
@@ -1966,15 +2014,17 @@ LEAF(bn_sqr_comba8)
 	dmultu	a_7,a_5		/* mul_add_c2(a[7],b[5],c1,c2,c3); */
 	mflo	t_1
 	mfhi	t_2
-	daddu	c_1,t_1
-	sltu	AT,c_1,t_1
-	daddu	a2,t_2,AT
-	daddu	c_2,a2
+	slt	c_3,t_2,zero
+	dsll	t_2,1
+	slt	a2,t_1,zero
+	daddu	t_2,a2
+	dsll	t_1,1
 	daddu	c_1,t_1
 	sltu	AT,c_1,t_1
 	daddu	t_2,AT
 	daddu	c_2,t_2
-	sltu	c_3,c_2,t_2
+	sltu	AT,c_2,t_2
+	daddu	c_3,AT
 	dmultu	a_6,a_6		/* mul_add_c(a[6],b[6],c1,c2,c3); */
 	mflo	t_1
 	mfhi	t_2
@@ -1989,15 +2039,17 @@ LEAF(bn_sqr_comba8)
 	dmultu	a_6,a_7		/* mul_add_c2(a[6],b[7],c2,c3,c1); */
 	mflo	t_1
 	mfhi	t_2
-	daddu	c_2,t_1
-	sltu	AT,c_2,t_1
-	daddu	a2,t_2,AT
-	daddu	c_3,a2
+	slt	c_1,t_2,zero
+	dsll	t_2,1
+	slt	a2,t_1,zero
+	daddu	t_2,a2
+	dsll	t_1,1
 	daddu	c_2,t_1
 	sltu	AT,c_2,t_1
 	daddu	t_2,AT
 	daddu	c_3,t_2
-	sltu	c_1,c_3,t_2
+	sltu	AT,c_3,t_2
+	daddu	c_1,AT
 	sd	c_2,104(a0)
 
 	dmultu	a_7,a_7		/* mul_add_c(a[7],b[7],c3,c1,c2); */
@@ -2028,28 +2080,30 @@ LEAF(bn_sqr_comba4)
 	dmultu	a_0,a_1		/* mul_add_c2(a[0],b[1],c2,c3,c1); */
 	mflo	t_1
 	mfhi	t_2
+	slt	c_1,t_2,zero
+	dsll	t_2,1
+	slt	a2,t_1,zero
+	daddu	t_2,a2
+	dsll	t_1,1
 	daddu	c_2,t_1
 	sltu	AT,c_2,t_1
 	daddu	c_3,t_2,AT
-	daddu	c_2,t_1
-	sltu	AT,c_2,t_1
-	daddu	t_2,AT
-	daddu	c_3,t_2
-	sltu	c_1,c_3,t_2
 	sd	c_2,8(a0)
 
 	dmultu	a_2,a_0		/* mul_add_c2(a[2],b[0],c3,c1,c2); */
 	mflo	t_1
 	mfhi	t_2
-	daddu	c_3,t_1
-	sltu	AT,c_3,t_1
-	daddu	a2,t_2,AT
-	daddu	c_1,a2
+	slt	c_2,t_2,zero
+	dsll	t_2,1
+	slt	a2,t_1,zero
+	daddu	t_2,a2
+	dsll	t_1,1
 	daddu	c_3,t_1
 	sltu	AT,c_3,t_1
 	daddu	t_2,AT
 	daddu	c_1,t_2
-	sltu	c_2,c_1,t_2
+	sltu	AT,c_1,t_2
+	daddu	c_2,AT
 	dmultu	a_1,a_1		/* mul_add_c(a[1],b[1],c3,c1,c2); */
 	mflo	t_1
 	mfhi	t_2
@@ -2064,24 +2118,26 @@ LEAF(bn_sqr_comba4)
 	dmultu	a_0,a_3		/* mul_add_c2(a[0],b[3],c1,c2,c3); */
 	mflo	t_1
 	mfhi	t_2
-	daddu	c_1,t_1
-	sltu	AT,c_1,t_1
-	daddu	a2,t_2,AT
-	daddu	c_2,a2
+	slt	c_3,t_2,zero
+	dsll	t_2,1
+	slt	a2,t_1,zero
+	daddu	t_2,a2
+	dsll	t_1,1
 	daddu	c_1,t_1
 	sltu	AT,c_1,t_1
 	daddu	t_2,AT
 	daddu	c_2,t_2
-	sltu	c_3,c_2,t_2
+	sltu	AT,c_2,t_2
+	daddu	c_3,AT
 	dmultu	a_1,a_2		/* mul_add_c(a2[1],b[2],c1,c2,c3); */
 	mflo	t_1
 	mfhi	t_2
-	daddu	c_1,t_1
-	sltu	AT,c_1,t_1
-	daddu	a2,t_2,AT
-	daddu	c_2,a2
-	sltu	AT,c_2,a2
+	slt	AT,t_2,zero
 	daddu	c_3,AT
+	dsll	t_2,1
+	slt	a2,t_1,zero
+	daddu	t_2,a2
+	dsll	t_1,1
 	daddu	c_1,t_1
 	sltu	AT,c_1,t_1
 	daddu	t_2,AT
@@ -2093,15 +2149,17 @@ LEAF(bn_sqr_comba4)
 	dmultu	a_3,a_1		/* mul_add_c2(a[3],b[1],c2,c3,c1); */
 	mflo	t_1
 	mfhi	t_2
-	daddu	c_2,t_1
-	sltu	AT,c_2,t_1
-	daddu	a2,t_2,AT
-	daddu	c_3,a2
+	slt	c_1,t_2,zero
+	dsll	t_2,1
+	slt	a2,t_1,zero
+	daddu	t_2,a2
+	dsll	t_1,1
 	daddu	c_2,t_1
 	sltu	AT,c_2,t_1
 	daddu	t_2,AT
 	daddu	c_3,t_2
-	sltu	c_1,c_3,t_2
+	sltu	AT,c_3,t_2
+	daddu	c_1,AT
 	dmultu	a_2,a_2		/* mul_add_c(a[2],b[2],c2,c3,c1); */
 	mflo	t_1
 	mfhi	t_2
@@ -2116,15 +2174,17 @@ LEAF(bn_sqr_comba4)
 	dmultu	a_2,a_3		/* mul_add_c2(a[2],b[3],c3,c1,c2); */
 	mflo	t_1
 	mfhi	t_2
-	daddu	c_3,t_1
-	sltu	AT,c_3,t_1
-	daddu	a2,t_2,AT
-	daddu	c_1,a2
+	slt	c_2,t_2,zero
+	dsll	t_2,1
+	slt	a2,t_1,zero
+	daddu	t_2,a2
+	dsll	t_1,1
 	daddu	c_3,t_1
 	sltu	AT,c_3,t_1
 	daddu	t_2,AT
 	daddu	c_1,t_2
-	sltu	c_2,c_1,t_2
+	sltu	AT,c_1,t_2
+	daddu	c_2,AT
 	sd	c_3,40(a0)
 
 	dmultu	a_3,a_3		/* mul_add_c(a[3],b[3],c1,c2,c3); */

crypto/cryptlib.c

@@ -240,7 +240,7 @@ void CRYPTO_destroy_dynlockid(int i)
 			}
 		else
 #endif
-			if (--(pointer->references) <= 0)
+			if (pointer->references <= 0)
 				{
 				sk_CRYPTO_dynlock_set(dyn_locks, i, NULL);
 				}
@@ -399,7 +399,7 @@ void CRYPTO_lock(int mode, int type, const char *file, int line)
 		struct CRYPTO_dynlock_value *pointer
 			= CRYPTO_get_dynlock_value(i);
 
-		if (pointer)
+		if (pointer && dynlock_lock_callback)
 			{
 			dynlock_lock_callback(mode, pointer, file, line);
 			}
@@ -430,7 +430,6 @@ int CRYPTO_add_lock(int *pointer, int amount, int type, const char *file,
 			CRYPTO_get_lock_name(type),
 			file,line);
 #endif
-		*pointer=ret;
 		}
 	else
 		{

crypto/dsa/dsa.h

@@ -236,6 +236,7 @@ DH *DSA_dup_DH(DSA *r);
 
 /* Reason codes. */
 #define DSA_R_DATA_TOO_LARGE_FOR_KEY_SIZE		 100
+#define DSA_R_MISSING_PARAMETERS			 101
 
 #ifdef  __cplusplus
 }

crypto/dsa/dsa_err.c

@@ -85,6 +85,7 @@ static ERR_STRING_DATA DSA_str_functs[]=
 static ERR_STRING_DATA DSA_str_reasons[]=
 	{
 {DSA_R_DATA_TOO_LARGE_FOR_KEY_SIZE       ,"data too large for key size"},
+{DSA_R_MISSING_PARAMETERS                ,"missing parameters"},
 {0,NULL}
 	};
 

crypto/dsa/dsa_ossl.c

@@ -105,6 +105,11 @@ static DSA_SIG *dsa_do_sign(const unsigned char *dgst, int dlen, DSA *dsa)
 	int i,reason=ERR_R_BN_LIB;
 	DSA_SIG *ret=NULL;
 
+	if (!dsa->p || !dsa->q || !dsa->g)
+		{
+		reason=DSA_R_MISSING_PARAMETERS;
+		goto err;
+		}
 	BN_init(&m);
 	BN_init(&xr);
 	s=BN_new();
@@ -167,6 +172,11 @@ static int dsa_sign_setup(DSA *dsa, BN_CTX *ctx_in, BIGNUM **kinvp, BIGNUM **rp)
 	BIGNUM k,*kinv=NULL,*r=NULL;
 	int ret=0;
 
+	if (!dsa->p || !dsa->q || !dsa->g)
+		{
+		DSAerr(DSA_F_DSA_SIGN_SETUP,DSA_R_MISSING_PARAMETERS);
+		return 0;
+		}
 	if (ctx_in == NULL)
 		{
 		if ((ctx=BN_CTX_new()) == NULL) goto err;
@@ -230,6 +240,17 @@ static int dsa_do_verify(const unsigned char *dgst, int dgst_len, DSA_SIG *sig,
 	BN_init(&u2);
 	BN_init(&t1);
 
+	if (BN_is_zero(sig->r) || sig->r->neg || BN_ucmp(sig->r, dsa->q) >= 0)
+		{
+		ret = 0;
+		goto err;
+		}
+	if (BN_is_zero(sig->s) || sig->s->neg || BN_ucmp(sig->s, dsa->q) >= 0)
+		{
+		ret = 0;
+		goto err;
+		}
+
 	/* Calculate W = inv(S) mod Q
 	 * save W in u2 */
 	if ((BN_mod_inverse(&u2,sig->s,dsa->q,ctx)) == NULL) goto err;

crypto/dso/dso_vms.c

@@ -62,7 +62,6 @@
 #ifdef VMS
 #pragma message disable DOLLARID
 #include <lib$routines.h>
-#include <libfisdef.h>
 #include <stsdef.h>
 #include <descrip.h>
 #include <starlet.h>
@@ -260,7 +259,8 @@ void vms_bind_sym(DSO *dso, const char *symname, void **sym)
 	{
 	DSO_VMS_INTERNAL *ptr;
 	int status;
-	int flags = LIB$M_FIS_MIXEDCASE;
+	int flags = (1<<4); /* LIB$M_FIS_MIXEDCASE, but this symbol isn't
+                               defined in VMS older than 7.0 or so */
 	struct dsc$descriptor_s symname_dsc;
 	*sym = NULL;
 

crypto/ebcdic.c

@@ -211,7 +211,7 @@ ascii2ebcdic(void *dest, const void *srce, size_t count)
 }
 
 #else /*CHARSET_EBCDIC*/
-#ifdef PEDANTIC
+#if defined(PEDANTIC) || defined(VMS) || defined(__VMS)
 static void *dummy=&dummy;
 #endif
 #endif

crypto/evp/e_bf.c

@@ -67,7 +67,7 @@ static int bf_init_key(EVP_CIPHER_CTX *ctx, const unsigned char *key,
 		       const unsigned char *iv, int enc);
 
 IMPLEMENT_BLOCK_CIPHER(bf, bf_ks, BF, bf_ks, NID_bf, 8, 16, 8,
-			0, bf_init_key, NULL, 
+			EVP_CIPH_VARIABLE_LENGTH, bf_init_key, NULL, 
 			EVP_CIPHER_set_asn1_iv, EVP_CIPHER_get_asn1_iv, NULL)
 	
 static int bf_init_key(EVP_CIPHER_CTX *ctx, const unsigned char *key,

crypto/evp/evp.h

@@ -554,9 +554,9 @@ int	EVP_read_pw_string(char *buf,int length,const char *prompt,int verify);
 void	EVP_set_pw_prompt(char *prompt);
 char *	EVP_get_pw_prompt(void);
 
-int	EVP_BytesToKey(const EVP_CIPHER *type,EVP_MD *md,unsigned char *salt,
-		unsigned char *data, int datal, int count,
-		unsigned char *key,unsigned char *iv);
+int     EVP_BytesToKey(const EVP_CIPHER *type, EVP_MD *md,
+		const unsigned char *salt, const unsigned char *data, int datal,
+       		int count, unsigned char *key, unsigned char *iv);
 
 int	EVP_EncryptInit(EVP_CIPHER_CTX *ctx,const EVP_CIPHER *type,
 		unsigned char *key, unsigned char *iv);

crypto/evp/evp_key.c

@@ -95,9 +95,9 @@ int EVP_read_pw_string(char *buf, int len, const char *prompt, int verify)
 #endif
 	}
 
-int EVP_BytesToKey(const EVP_CIPHER *type, EVP_MD *md, unsigned char *salt,
-	     unsigned char *data, int datal, int count, unsigned char *key,
-	     unsigned char *iv)
+int EVP_BytesToKey(const EVP_CIPHER *type, EVP_MD *md, 
+             const unsigned char *salt, const unsigned char *data, int datal, 
+             int count, unsigned char *key, unsigned char *iv)
 	{
 	EVP_MD_CTX c;
 	unsigned char md_buf[EVP_MAX_MD_SIZE];

crypto/opensslv.h

@@ -2,7 +2,7 @@
 #define HEADER_OPENSSLV_H
 
 /* Numeric release version identifier:
- * MMNNFFPPS: major minor fix patch status
+ * MNNFFPPS: major minor fix patch status
  * The status nibble has one of the values 0 for development, 1 to e for betas
  * 1 to 14, and f for release.  The patch level is exactly that.
  * For example:
@@ -25,8 +25,8 @@
  * (Prior to 0.9.5a beta1, a different scheme was used: MMNNFFRBB for
  *  major minor fix final patch/beta)
  */
-#define OPENSSL_VERSION_NUMBER	0x00906013L
-#define OPENSSL_VERSION_TEXT	"OpenSSL 0.9.6a-beta3 30 Mar 2001"
+#define OPENSSL_VERSION_NUMBER	0x0090602fL
+#define OPENSSL_VERSION_TEXT	"OpenSSL 0.9.6b 9 Jul 2001"
 #define OPENSSL_VERSION_PTEXT	" part of " OPENSSL_VERSION_TEXT
 
 

crypto/perlasm/x86unix.pl

@@ -79,7 +79,7 @@ sub main'DWP
 	local($addr,$reg1,$reg2,$idx)=@_;
 
 	$ret="";
-	$addr =~ s/(^|[+ \t])([A-Za-z_]+)($|[+ \t])/$1$under$2$3/;
+	$addr =~ s/(^|[+ \t])([A-Za-z_]+[A-Za-z0-9_]+)($|[+ \t])/$1$under$2$3/;
 	$reg1="$regs{$reg1}" if defined($regs{$reg1});
 	$reg2="$regs{$reg2}" if defined($regs{$reg2});
 	$ret.=$addr if ($addr ne "") && ($addr ne 0);

crypto/pkcs12/p12_kiss.c

@@ -264,6 +264,7 @@ static int parse_bag(PKCS12_SAFEBAG *bag, const char *pass, int passlen,
 		if (lkey) {
 			*keymatch |= MATCH_CERT;
 			if (cert) *cert = x509;
+			else X509_free(x509);
 		} else {
 			if(ca) sk_X509_push (*ca, x509);
 			else X509_free(x509);

crypto/pkcs7/pk7_doit.c

@@ -370,7 +370,7 @@ BIO *PKCS7_dataDecode(PKCS7 *p7, EVP_PKEY *pkey, BIO *in_bio, X509 *pcert)
 		if (ri == NULL) {
 			PKCS7err(PKCS7_F_PKCS7_DATADECODE,
 				 PKCS7_R_NO_RECIPIENT_MATCHES_CERTIFICATE);
-			return(NULL);
+			goto err;
 		}
 
 		jj=EVP_PKEY_size(pkey);
@@ -393,7 +393,7 @@ BIO *PKCS7_dataDecode(PKCS7 *p7, EVP_PKEY *pkey, BIO *in_bio, X509 *pcert)
 		BIO_get_cipher_ctx(etmp,&evp_ctx);
 		EVP_CipherInit(evp_ctx,evp_cipher,NULL,NULL,0);
 		if (EVP_CIPHER_asn1_to_param(evp_ctx,enc_alg->parameter) < 0)
-			return(NULL);
+			goto err;
 
 		if (jj != EVP_CIPHER_CTX_key_length(evp_ctx)) {
 			/* Some S/MIME clients don't use the same key

crypto/rand/md_rand.c

@@ -141,10 +141,11 @@ static long md_count[2]={0,0};
 static double entropy=0;
 static int initialized=0;
 
-/* This should be set to 1 only when ssleay_rand_add() is called inside
-   an already locked state, so it doesn't try to lock and thereby cause
-   a hang.  And it should always be reset back to 0 before unlocking. */
-static int add_do_not_lock=0;
+static unsigned int crypto_lock_rand = 0; /* may be set only when a thread
+                                           * holds CRYPTO_LOCK_RAND
+                                           * (to prevent double locking) */
+static unsigned long locking_thread = 0; /* valid iff crypto_lock_rand is set */
+
 
 #ifdef PREDICT
 int rand_predictable=0;
@@ -191,6 +192,7 @@ static void ssleay_rand_add(const void *buf, int num, double add)
 	long md_c[2];
 	unsigned char local_md[MD_DIGEST_LENGTH];
 	MD_CTX m;
+	int do_not_lock;
 
 	/*
 	 * (Based on the rand(3) manpage)
@@ -207,7 +209,10 @@ static void ssleay_rand_add(const void *buf, int num, double add)
          * hash function.
 	 */
 
-	if (!add_do_not_lock) CRYPTO_w_lock(CRYPTO_LOCK_RAND);
+	/* check if we already have the lock */
+	do_not_lock = crypto_lock_rand && (locking_thread == CRYPTO_thread_id());
+
+	if (!do_not_lock) CRYPTO_w_lock(CRYPTO_LOCK_RAND);
 	st_idx=state_index;
 
 	/* use our own copies of the counters so that even
@@ -239,7 +244,7 @@ static void ssleay_rand_add(const void *buf, int num, double add)
 
 	md_count[1] += (num / MD_DIGEST_LENGTH) + (num % MD_DIGEST_LENGTH > 0);
 
-	if (!add_do_not_lock) CRYPTO_w_unlock(CRYPTO_LOCK_RAND);
+	if (!do_not_lock) CRYPTO_w_unlock(CRYPTO_LOCK_RAND);
 
 	for (i=0; i<num; i+=MD_DIGEST_LENGTH)
 		{
@@ -281,7 +286,7 @@ static void ssleay_rand_add(const void *buf, int num, double add)
 		}
 	memset((char *)&m,0,sizeof(m));
 
-	if (!add_do_not_lock) CRYPTO_w_lock(CRYPTO_LOCK_RAND);
+	if (!do_not_lock) CRYPTO_w_lock(CRYPTO_LOCK_RAND);
 	/* Don't just copy back local_md into md -- this could mean that
 	 * other thread's seeding remains without effect (except for
 	 * the incremented counter).  By XORing it we keep at least as
@@ -292,7 +297,7 @@ static void ssleay_rand_add(const void *buf, int num, double add)
 		}
 	if (entropy < ENTROPY_NEEDED) /* stop counting when we have enough */
 	    entropy += add;
-	if (!add_do_not_lock) CRYPTO_w_unlock(CRYPTO_LOCK_RAND);
+	if (!do_not_lock) CRYPTO_w_unlock(CRYPTO_LOCK_RAND);
 	
 #if !defined(THREADS) && !defined(WIN32)
 	assert(md_c[1] == md_count[1]);
@@ -308,6 +313,7 @@ static int ssleay_rand_bytes(unsigned char *buf, int num)
 	{
 	static volatile int stirred_pool = 0;
 	int i,j,k,st_num,st_idx;
+	int num_ceil;
 	int ok;
 	long md_c[2];
 	unsigned char local_md[MD_DIGEST_LENGTH];
@@ -328,33 +334,42 @@ static int ssleay_rand_bytes(unsigned char *buf, int num)
 		}
 #endif
 
+	if (num <= 0)
+		return 1;
+	
+	/* round upwards to multiple of MD_DIGEST_LENGTH/2 */
+	num_ceil = (1 + (num-1)/(MD_DIGEST_LENGTH/2)) * (MD_DIGEST_LENGTH/2);
+
 	/*
 	 * (Based on the rand(3) manpage:)
 	 *
 	 * For each group of 10 bytes (or less), we do the following:
 	 *
-	 * Input into the hash function the top 10 bytes from the
-	 * local 'md' (which is initialized from the global 'md'
-	 * before any bytes are generated), the bytes that are
-	 * to be overwritten by the random bytes, and bytes from the
-	 * 'state' (incrementing looping index).  From this digest output
-	 * (which is kept in 'md'), the top (up to) 10 bytes are
-	 * returned to the caller and the bottom (up to) 10 bytes are xored
-	 * into the 'state'.
+	 * Input into the hash function the local 'md' (which is initialized from
+	 * the global 'md' before any bytes are generated), the bytes that are to
+	 * be overwritten by the random bytes, and bytes from the 'state'
+	 * (incrementing looping index). From this digest output (which is kept
+	 * in 'md'), the top (up to) 10 bytes are returned to the caller and the
+	 * bottom 10 bytes are xored into the 'state'.
+	 * 
 	 * Finally, after we have finished 'num' random bytes for the
 	 * caller, 'count' (which is incremented) and the local and global 'md'
 	 * are fed into the hash function and the results are kept in the
 	 * global 'md'.
 	 */
 
-	if (!initialized)
-		RAND_poll();
-
 	CRYPTO_w_lock(CRYPTO_LOCK_RAND);
-	add_do_not_lock = 1;	/* Since we call ssleay_rand_add while in
-				   this locked state. */
 
-	initialized = 1;
+	/* prevent ssleay_rand_bytes() from trying to obtain the lock again */
+	crypto_lock_rand = 1;
+	locking_thread = CRYPTO_thread_id();
+
+	if (!initialized)
+		{
+		RAND_poll();
+		initialized = 1;
+		}
+	
 	if (!stirred_pool)
 		do_stir_pool = 1;
 	
@@ -380,11 +395,11 @@ static int ssleay_rand_bytes(unsigned char *buf, int num)
 
 	if (do_stir_pool)
 		{
-		/* Our output function chains only half of 'md', so we better
-		 * make sure that the required entropy gets 'evenly distributed'
-		 * through 'state', our randomness pool.  The input function
-		 * (ssleay_rand_add) chains all of 'md', which makes it more
-		 * suitable for this purpose.
+		/* In the output function only half of 'md' remains secret,
+		 * so we better make sure that the required entropy gets
+		 * 'evenly distributed' through 'state', our randomness pool.
+		 * The input function (ssleay_rand_add) chains all of 'md',
+		 * which makes it more suitable for this purpose.
 		 */
 
 		int n = STATE_SIZE; /* so that the complete pool gets accessed */
@@ -409,21 +424,23 @@ static int ssleay_rand_bytes(unsigned char *buf, int num)
 	md_c[1] = md_count[1];
 	memcpy(local_md, md, sizeof md);
 
-	state_index+=num;
+	state_index+=num_ceil;
 	if (state_index > state_num)
 		state_index %= state_num;
 
-	/* state[st_idx], ..., state[(st_idx + num - 1) % st_num]
+	/* state[st_idx], ..., state[(st_idx + num_ceil - 1) % st_num]
 	 * are now ours (but other threads may use them too) */
 
 	md_count[0] += 1;
 
-	add_do_not_lock = 0;	/* If this would ever be forgotten, we can
-				   expect any evil god to eat our souls. */
+	/* before unlocking, we must clear 'crypto_lock_rand' */
+	crypto_lock_rand = 0;
+	locking_thread = 0;
 	CRYPTO_w_unlock(CRYPTO_LOCK_RAND);
 
 	while (num > 0)
 		{
+		/* num_ceil -= MD_DIGEST_LENGTH/2 */
 		j=(num >= MD_DIGEST_LENGTH/2)?MD_DIGEST_LENGTH/2:num;
 		num-=j;
 		MD_Init(&m);
@@ -434,27 +451,28 @@ static int ssleay_rand_bytes(unsigned char *buf, int num)
 			curr_pid = 0;
 			}
 #endif
-		MD_Update(&m,&(local_md[MD_DIGEST_LENGTH/2]),MD_DIGEST_LENGTH/2);
+		MD_Update(&m,local_md,MD_DIGEST_LENGTH);
 		MD_Update(&m,(unsigned char *)&(md_c[0]),sizeof(md_c));
 #ifndef PURIFY
 		MD_Update(&m,buf,j); /* purify complains */
 #endif
-		k=(st_idx+j)-st_num;
+		k=(st_idx+MD_DIGEST_LENGTH/2)-st_num;
 		if (k > 0)
 			{
-			MD_Update(&m,&(state[st_idx]),j-k);
+			MD_Update(&m,&(state[st_idx]),MD_DIGEST_LENGTH/2-k);
 			MD_Update(&m,&(state[0]),k);
 			}
 		else
-			MD_Update(&m,&(state[st_idx]),j);
+			MD_Update(&m,&(state[st_idx]),MD_DIGEST_LENGTH/2);
 		MD_Final(local_md,&m);
 
-		for (i=0; i<j; i++)
+		for (i=0; i<MD_DIGEST_LENGTH/2; i++)
 			{
 			state[st_idx++]^=local_md[i]; /* may compete with other threads */
-			*(buf++)=local_md[i+MD_DIGEST_LENGTH/2];
 			if (st_idx >= st_num)
 				st_idx=0;
+			if (i < j)
+				*(buf++)=local_md[i+MD_DIGEST_LENGTH/2];
 			}
 		}
 
@@ -483,11 +501,12 @@ static int ssleay_rand_bytes(unsigned char *buf, int num)
 static int ssleay_rand_pseudo_bytes(unsigned char *buf, int num) 
 	{
 	int ret;
+	unsigned long err;
 
 	ret = RAND_bytes(buf, num);
 	if (ret == 0)
 		{
-		long err = ERR_peek_error();
+		err = ERR_peek_error();
 		if (ERR_GET_LIB(err) == ERR_LIB_RAND &&
 		    ERR_GET_REASON(err) == RAND_R_PRNG_NOT_SEEDED)
 			(void)ERR_get_error();
@@ -498,14 +517,37 @@ static int ssleay_rand_pseudo_bytes(unsigned char *buf, int num)
 static int ssleay_rand_status(void)
 	{
 	int ret;
+	int do_not_lock;
 
+	/* check if we already have the lock
+	 * (could happen if a RAND_poll() implementation calls RAND_status()) */
+	do_not_lock = crypto_lock_rand && (locking_thread == CRYPTO_thread_id());
+	
+	if (!do_not_lock)
+		{
+		CRYPTO_w_lock(CRYPTO_LOCK_RAND);
+		
+		/* prevent ssleay_rand_bytes() from trying to obtain the lock again */
+		crypto_lock_rand = 1;
+		locking_thread = CRYPTO_thread_id();
+		}
+	
 	if (!initialized)
+		{
 		RAND_poll();
+		initialized = 1;
+		}
 
-	CRYPTO_w_lock(CRYPTO_LOCK_RAND);
-	initialized = 1;
 	ret = entropy >= ENTROPY_NEEDED;
-	CRYPTO_w_unlock(CRYPTO_LOCK_RAND);
 
+	if (!do_not_lock)
+		{
+		/* before unlocking, we must clear 'crypto_lock_rand' */
+		crypto_lock_rand = 0;
+		locking_thread = 0;
+		
+		CRYPTO_w_unlock(CRYPTO_LOCK_RAND);
+		}
+	
 	return ret;
 	}

crypto/rand/randfile.c

@@ -211,6 +211,12 @@ const char *RAND_file_name(char *buf, size_t size)
 		{
 		if (OPENSSL_issetugid() == 0)
 			s=getenv("HOME");
+#ifdef DEFAULT_HOME
+		if (s == NULL)
+			{
+			s = DEFAULT_HOME;
+			}
+#endif
 		if (s != NULL && (strlen(s)+strlen(RFILE)+2 < size))
 			{
 			strcpy(buf,s);
@@ -220,7 +226,7 @@ const char *RAND_file_name(char *buf, size_t size)
 			strcat(buf,RFILE);
 			ret=buf;
 			}
-		  else
+		else
 		  	buf[0] = '\0'; /* no file name */
 		}
 	return(ret);

crypto/rsa/rsa_oaep.c

@@ -77,14 +77,16 @@ int RSA_padding_check_PKCS1_OAEP(unsigned char *to, int tlen,
     int i, dblen, mlen = -1;
     unsigned char *maskeddb;
     int lzero;
-    unsigned char *db, seed[SHA_DIGEST_LENGTH], phash[SHA_DIGEST_LENGTH];
+    unsigned char *db = NULL, seed[SHA_DIGEST_LENGTH], phash[SHA_DIGEST_LENGTH];
 
     if (--num < 2 * SHA_DIGEST_LENGTH + 1)
-	{
-	RSAerr(RSA_F_RSA_PADDING_CHECK_PKCS1_OAEP, RSA_R_OAEP_DECODING_ERROR);
-	return (-1);
-	}
+	goto decoding_err;
 
+    lzero = num - flen;
+    if (lzero < 0)
+	goto decoding_err;
+    maskeddb = from - lzero + SHA_DIGEST_LENGTH;
+    
     dblen = num - SHA_DIGEST_LENGTH;
     db = OPENSSL_malloc(dblen);
     if (db == NULL)
@@ -93,9 +95,6 @@ int RSA_padding_check_PKCS1_OAEP(unsigned char *to, int tlen,
 	return (-1);
 	}
 
-    lzero = num - flen;
-    maskeddb = from - lzero + SHA_DIGEST_LENGTH;
-    
     MGF1(seed, SHA_DIGEST_LENGTH, maskeddb, dblen);
     for (i = lzero; i < SHA_DIGEST_LENGTH; i++)
 	seed[i] ^= from[i - lzero];
@@ -107,21 +106,20 @@ int RSA_padding_check_PKCS1_OAEP(unsigned char *to, int tlen,
     SHA1(param, plen, phash);
 
     if (memcmp(db, phash, SHA_DIGEST_LENGTH) != 0)
-	RSAerr(RSA_F_RSA_PADDING_CHECK_PKCS1_OAEP, RSA_R_OAEP_DECODING_ERROR);
+	goto decoding_err;
     else
 	{
 	for (i = SHA_DIGEST_LENGTH; i < dblen; i++)
 	    if (db[i] != 0x00)
 		break;
 	if (db[i] != 0x01 || i++ >= dblen)
-	    RSAerr(RSA_F_RSA_PADDING_CHECK_PKCS1_OAEP,
-		   RSA_R_OAEP_DECODING_ERROR);
+	  goto decoding_err;
 	else
 	    {
 	    mlen = dblen - i;
 	    if (tlen < mlen)
 		{
-		RSAerr(RSA_F_RSA_PADDING_ADD_PKCS1_OAEP, RSA_R_DATA_TOO_LARGE);
+		RSAerr(RSA_F_RSA_PADDING_CHECK_PKCS1_OAEP, RSA_R_DATA_TOO_LARGE);
 		mlen = -1;
 		}
 	    else
@@ -130,6 +128,13 @@ int RSA_padding_check_PKCS1_OAEP(unsigned char *to, int tlen,
 	}
     OPENSSL_free(db);
     return (mlen);
+
+decoding_err:
+    /* to avoid chosen ciphertext attacks, the error message should not reveal
+     * which kind of decoding error happened */
+    RSAerr(RSA_F_RSA_PADDING_CHECK_PKCS1_OAEP, RSA_R_OAEP_DECODING_ERROR);
+    if (db != NULL) OPENSSL_free(db);
+    return -1;
     }
 
 int MGF1(unsigned char *mask, long len, unsigned char *seed, long seedlen)

crypto/x509/x509_obj.c

@@ -214,6 +214,8 @@ int i;
 		}
 	else
 		p=buf;
+	if (i == 0)
+		*p = '\0';
 	return(p);
 err:
 	X509err(X509_F_X509_NAME_ONELINE,ERR_R_MALLOC_FAILURE);

crypto/x509/x509_trs.c

@@ -228,7 +228,8 @@ int X509_TRUST_get_trust(X509_TRUST *xp)
 
 static int trust_1oidany(X509_TRUST *trust, X509 *x, int flags)
 {
-	if(x->aux) return obj_trust(trust->arg1, x, flags);
+	if(x->aux && (x->aux->trust || x->aux->reject))
+		return obj_trust(trust->arg1, x, flags);
 	/* we don't have any trust settings: for compatibility
 	 * we return trusted if it is self signed
 	 */

doc/apps/enc.pod

@@ -96,12 +96,18 @@ of hex digits.
 =item B<-K key>
 
 the actual key to use: this must be represented as a string comprised only
-of hex digits.
+of hex digits. If only the key is specified, the IV must additionally specified
+using the B<-iv> option. When both a key and a password are specified, the
+key given with the B<-K> option will be used and the IV generated from the
+password will be taken. It probably does not make much sense to specify
+both key and password.
 
 =item B<-iv IV>
 
 the actual IV to use: this must be represented as a string comprised only
-of hex digits.
+of hex digits. When only the key is specified using the B<-K> option, the
+IV must explicitly be defined. When a password is being specified using
+one of the other options, the IV is generated from this password.
 
 =item B<-p>
 

doc/apps/rsautl.pod

@@ -101,11 +101,11 @@ Sign some data using a private key:
 
 Recover the signed data
 
- openssl rsautl -sign -in sig -inkey key.pem
+ openssl rsautl -verify -in sig -inkey key.pem
 
 Examine the raw signed data:
 
- openssl rsautl -sign -in file -inkey key.pem -raw -hexdump
+ openssl rsautl -verify -in file -inkey key.pem -raw -hexdump
 
  0000 - 00 01 ff ff ff ff ff ff-ff ff ff ff ff ff ff ff   ................
  0010 - ff ff ff ff ff ff ff ff-ff ff ff ff ff ff ff ff   ................

doc/apps/s_server.pod

@@ -7,7 +7,7 @@ s_server - SSL/TLS server program
 
 =head1 SYNOPSIS
 
-B<openssl> B<s_client>
+B<openssl> B<s_server>
 [B<-accept port>]
 [B<-context id>]
 [B<-verify depth>]

doc/crypto/bio.pod

@@ -40,7 +40,7 @@ BIO).
 =head1 SEE ALSO
 
 L<BIO_ctrl(3)|BIO_ctrl(3)>,
-L<BIO_f_base64(3)|BIO_f_base64(3)>,
+L<BIO_f_base64(3)|BIO_f_base64(3)>, L<BIO_f_buffer(3)|BIO_f_buffer(3)>,
 L<BIO_f_cipher(3)|BIO_f_cipher(3)>, L<BIO_f_md(3)|BIO_f_md(3)>,
 L<BIO_f_null(3)|BIO_f_null(3)>, L<BIO_f_ssl(3)|BIO_f_ssl(3)>,
 L<BIO_find_type(3)|BIO_find_type(3)>, L<BIO_new(3)|BIO_new(3)>,

doc/crypto/rand.pod

@@ -127,13 +127,12 @@ function and xor).
 When bytes are extracted from the RNG, the following process is used.
 For each group of 10 bytes (or less), we do the following:
 
-Input into the hash function the top 10 bytes from the local 'md'
-(which is initialized from the global 'md' before any bytes are
-generated), the bytes that are to be overwritten by the random bytes,
-and bytes from the 'state' (incrementing looping index). From this
-digest output (which is kept in 'md'), the top (up to) 10 bytes are
-returned to the caller and the bottom (up to) 10 bytes are xored into
-the 'state'.
+Input into the hash function the local 'md' (which is initialized from
+the global 'md' before any bytes are generated), the bytes that are to
+be overwritten by the random bytes, and bytes from the 'state'
+(incrementing looping index). From this digest output (which is kept
+in 'md'), the top (up to) 10 bytes are returned to the caller and the
+bottom 10 bytes are xored into the 'state'.
 
 Finally, after we have finished 'num' random bytes for the caller,
 'count' (which is incremented) and the local and global 'md' are fed

doc/ssl/SSL_CTX_get_ex_new_index.pod

@@ -40,7 +40,7 @@ SSL_CTX_get_ex_data() is used to retrieve the information for B<idx> from
 B<ctx>.
 
 A detailed description for the B<*_get_ex_new_index()> functionality
-can be found in L<RSA_get_ex_new_index.pod(3)|RSA_get_ex_new_index.pod(3)>.
+can be found in L<RSA_get_ex_new_index(3)|RSA_get_ex_new_index(3)>.
 The B<*_get_ex_data()> and B<*_set_ex_data()> functionality is described in
 L<CRYPTO_set_ex_data(3)|CRYPTO_set_ex_data(3)>.
 

doc/ssl/SSL_CTX_load_verify_locations.pod

@@ -33,10 +33,6 @@ which can be used e.g. for descriptions of the certificates.
 The B<CAfile> is processed on execution of the SSL_CTX_load_verify_locations()
 function.
 
-If on an TLS/SSL server no special setting is performed using *client_CA_list()
-functions, the certificates contained in B<CAfile> are listed to the client
-as available CAs during the TLS/SSL handshake.
-
 If B<CApath> is not NULL, it points to a directory containing CA certificates
 in PEM format. The files each contain one CA certificate. The files are
 looked up by the CA subject name hash value, which must hence be available.
@@ -50,9 +46,6 @@ The certificates in B<CApath> are only looked up when required, e.g. when
 building the certificate chain or when actually performing the verification
 of a peer certificate.
 
-On a server, the certificates in B<CApath> are not listed as available
-CA certificates to a client during a TLS/SSL handshake.
-
 When looking up CA certificates, the OpenSSL library will first search the
 certificates in B<CAfile>, then those in B<CApath>. Certificate matching
 is done based on the subject name, the key identifier (if present), and the
@@ -62,6 +55,13 @@ matching the parameters is found, the verification process will be performed;
 no other certificates for the same parameters will be searched in case of
 failure.
 
+In server mode, when requesting a client certificate, the server must send
+the list of CAs of which it will accept client certificates. This list
+is not influenced by the contents of B<CAfile> or B<CApath> and must
+explicitely be set using the
+L<SSL_CTX_set_client_CA_list(3)|SSL_CTX_set_client_CA_list(3)>
+family of functions.
+
 When building its own certificate chain, an OpenSSL client/server will
 try to fill in missing certificates from B<CAfile>/B<CApath>, if the
 certificate chain was not explicitly specified (see

doc/ssl/SSL_CTX_set_client_CA_list.pod

@@ -36,25 +36,23 @@ the chosen B<ssl>, overriding the setting valid for B<ssl>'s SSL_CTX object.
 
 When a TLS/SSL server requests a client certificate (see
 B<SSL_CTX_set_verify_options()>), it sends a list of CAs, for which
-it will accept certificates, to the client. If no special list is provided,
-the CAs available using the B<CAfile> option in
-L<SSL_CTX_load_verify_locations(3)|SSL_CTX_load_verify_locations(3)>
-are sent.
+it will accept certificates, to the client.
 
-This list can be explicitly set using the SSL_CTX_set_client_CA_list() for
+This list must explicitly be set using SSL_CTX_set_client_CA_list() for
 B<ctx> and SSL_set_client_CA_list() for the specific B<ssl>. The list
 specified overrides the previous setting. The CAs listed do not become
 trusted (B<list> only contains the names, not the complete certificates); use
 L<SSL_CTX_load_verify_locations(3)|SSL_CTX_load_verify_locations(3)> 
 to additionally load them for verification.
 
+If the list of acceptable CAs is compiled in a file, the
+L<SSL_load_client_CA_file(3)|SSL_load_client_CA_file(3)>
+function can be used to help importing the necessary data.
+
 SSL_CTX_add_client_CA() and SSL_add_client_CA() can be used to add additional
 items the list of client CAs. If no list was specified before using
 SSL_CTX_set_client_CA_list() or SSL_set_client_CA_list(), a new client
-CA list for B<ctx> or B<ssl> (as appropriate) is opened. The CAs implicitly
-specified using
-L<SSL_CTX_load_verify_locations(3)|SSL_CTX_load_verify_locations(3)>
-are no longer used automatically.
+CA list for B<ctx> or B<ssl> (as appropriate) is opened.
 
 These functions are only useful for TLS/SSL servers.
 
@@ -80,11 +78,17 @@ to find out the reason.
 
 =back
 
+=head1 EXAMPLES
+
+Scan all certificates in B<CAfile> and list them as acceptable CAs:
+
+  SSL_CTX_set_client_CA_list(ctx,SSL_load_client_CA_file(CAfile));
+
 =head1 SEE ALSO
 
 L<ssl(3)|ssl(3)>,
 L<SSL_get_client_CA_list(3)|SSL_get_client_CA_list(3)>,
-L<SSL_load_client_CA_file(3)|SSL_load_client_CA_file(3)>
+L<SSL_load_client_CA_file(3)|SSL_load_client_CA_file(3)>,
 L<SSL_CTX_load_verify_locations(3)|SSL_CTX_load_verify_locations(3)>
 
 =cut

doc/ssl/SSL_CTX_set_session_cache_mode.pod

@@ -101,7 +101,7 @@ L<SSL_CTX_sess_number(3)|SSL_CTX_sess_number(3)>,
 L<SSL_CTX_sess_set_cache_size(3)|SSL_CTX_sess_set_cache_size(3)>,
 L<SSL_CTX_sess_set_get_cb(3)|SSL_CTX_sess_set_get_cb(3)>,
 L<SSL_CTX_set_session_id_context(3)|SSL_CTX_set_session_id_context(3)>,
-L<SSL_CTX_set_timeout.pod(3)|SSL_CTX_set_timeout.pod(3)>,
+L<SSL_CTX_set_timeout(3)|SSL_CTX_set_timeout(3)>,
 L<SSL_CTX_flush_sessions(3)|SSL_CTX_flush_sessions(3)>
 
 =cut

doc/ssl/SSL_SESSION_get_ex_new_index.pod

@@ -40,7 +40,7 @@ SSL_SESSION_get_ex_data() is used to retrieve the information for B<idx> from
 B<session>.
 
 A detailed description for the B<*_get_ex_new_index()> functionality
-can be found in L<RSA_get_ex_new_index.pod(3)|RSA_get_ex_new_index.pod(3)>.
+can be found in L<RSA_get_ex_new_index(3)|RSA_get_ex_new_index(3)>.
 The B<*_get_ex_data()> and B<*_set_ex_data()> functionality is described in
 L<CRYPTO_set_ex_data(3)|CRYPTO_set_ex_data(3)>.
 

doc/ssl/SSL_get_error.pod

@@ -69,6 +69,17 @@ to read data.  This is mainly because TLS/SSL handshakes may occur at any
 time during the protocol (initiated by either the client or the server);
 SSL_read(), SSL_peek(), and SSL_write() will handle any pending handshakes.
 
+=item SSL_ERROR_WANT_CONNECT
+
+The operation did not complete; the same TLS/SSL I/O function should be
+called again later. The underlying BIO was not connected yet to the peer
+and the call would block in connect(). The SSL function should be
+called again when the connection is established. This messages can only
+appear with a BIO_s_connect() BIO.
+In order to find out, when the connection has been successfully established,
+on many platforms select() or poll() for writing on the socket file descriptor
+can be used.
+
 =item SSL_ERROR_WANT_X509_LOOKUP
 
 The operation did not complete because an application callback set by

doc/ssl/SSL_get_ex_new_index.pod

@@ -40,7 +40,7 @@ SSL_get_ex_data() is used to retrieve the information for B<idx> from
 B<ssl>.
 
 A detailed description for the B<*_get_ex_new_index()> functionality
-can be found in L<RSA_get_ex_new_index.pod(3)|RSA_get_ex_new_index.pod(3)>.
+can be found in L<RSA_get_ex_new_index(3)|RSA_get_ex_new_index(3)>.
 The B<*_get_ex_data()> and B<*_set_ex_data()> functionality is described in
 L<CRYPTO_set_ex_data(3)|CRYPTO_set_ex_data(3)>.
 

doc/ssl/SSL_get_peer_certificate.pod

@@ -17,6 +17,12 @@ peer presented. If the peer did not present a certificate, NULL is returned.
 
 =head1 NOTES
 
+Due to the protocol definition, a TLS/SSL server will always send a
+certificate, if present. A client will only send a certificate when
+explicitely requested to do so by the server (see
+L<SSL_CTX_set_verify(3)|SSL_CTX_set_verify(3)>). If an anonymous cipher
+is used, no certificates are sent.
+
 That a certificate is returned does not indicate information about the
 verification state, use L<SSL_get_verify_result(3)|SSL_get_verify_result(3)>
 to check the verification state.
@@ -43,6 +49,7 @@ The return value points to the certificate presented by the peer.
 
 =head1 SEE ALSO
 
-L<ssl(3)|ssl(3)>, L<SSL_get_verify_result(3)|SSL_get_verify_result(3)>
+L<ssl(3)|ssl(3)>, L<SSL_get_verify_result(3)|SSL_get_verify_result(3)>,
+L<SSL_CTX_set_verify(3)|SSL_CTX_set_verify(3)>
 
 =cut

doc/ssl/SSL_read.pod

@@ -29,7 +29,22 @@ initialized to client or server mode. This is not the case if a generic
 method is being used (see L<SSL_CTX_new(3)|SSL_CTX_new(3)>, so that
 L<SSL_set_connect_state(3)|SSL_set_connect_state(3)> or SSL_set_accept_state()
 must be used before the first call to an SSL_read() or
-L<SSL_write(3)|SSL_write(3)> function.
+L<SSL_write(3)|SSL_write(3)> function).
+
+SSL_read() works based on the SSL/TLS records. The data are received in
+records (with a maximum record size of 16kB for SSLv3/TLSv1). Only when a
+record has been completely received, it can be processed (decryption and
+check of integrity). Therefore data that was not retrieved at the last
+call of SSL_read() can still be buffered inside the SSL layer and will be
+retrieved on the next call to SSL_read(). If B<num> is higher than the
+number of bytes buffered, SSL_read() will return with the bytes buffered.
+If no more bytes are in the buffer, SSL_read() will trigger the processing
+of the next record. Only when the record has been received and processed
+completely, SSL_read() will return reporting success. At most the contents
+of the record will be returned. As the size of an SSL/TLS record may exceed
+the maximum packet size of the underlying transport (e.g. TCP), it may
+be necessary to read several packets from the transport layer before the
+record is complete and SSL_read() can succeed.
 
 If the underlying BIO is B<blocking>, SSL_read() will only return, once the
 read operation has been finished or an error occurred, except when a

doc/ssl/SSL_shutdown.pod

@@ -66,7 +66,7 @@ Call SSL_get_error() with the return value B<ret> to find out the reason.
 
 L<SSL_get_error(3)|SSL_get_error(3)>, L<SSL_connect(3)|SSL_connect(3)>,
 L<SSL_accept(3)|SSL_accept(3)>, L<SSL_set_shutdown(3)|SSL_set_shutdown(3)>,
-L<SSL_clear(3)|SSL_clear(3), L<SSL_free(3)|SSL_free(3)>,
+L<SSL_clear(3)|SSL_clear(3)>, L<SSL_free(3)|SSL_free(3)>,
 L<ssl(3)|ssl(3)>, L<bio(3)|bio(3)>
 
 =cut

doc/ssl/SSL_write.pod

@@ -50,6 +50,17 @@ non-blocking socket, nothing is to be done, but select() can be used to check
 for the required condition. When using a buffering BIO, like a BIO pair, data
 must be written into or retrieved out of the BIO before being able to continue.
 
+SSL_write() will only return with success, when the complete contents
+of B<buf> of length B<num> has been written. This default behaviour
+can be changed with the SSL_MODE_ENABLE_PARTIAL_WRITE option of
+L<SSL_CTX_set_mode(3)|SSL_CTX_set_mode(3)>. When this flag is set,
+SSL_write() will also return with success, when a partial write has been
+successfully completed. In this case the SSL_write() operation is considered
+completed. The bytes are sent and a new SSL_write() operation with a new
+buffer (with the already sent bytes removed) must be started.
+A partial write is performed with the size of a message block, which is
+16kB for SSLv3/TLSv1.
+
 =head1 WARNING
 
 When an SSL_write() operation has to be repeated because of

e_os.h

@@ -224,6 +224,7 @@ extern "C" {
 #  define SSLEAY_CONF	OPENSSL_CONF
 #  define NUL_DEV	"nul"
 #  define RFILE		".rnd"
+#  define DEFAULT_HOME  "C:"
 
 #else /* The non-microsoft world world */
 

ssl/s2_srvr.c

@@ -405,12 +405,13 @@ static int get_client_master_key(SSL *s)
 	/* bad decrypt */
 #if 1
 	/* If a bad decrypt, continue with protocol but with a
-	 * dud master secret */
+	 * random master secret (Bleichenbacher attack) */
 	if ((i < 0) ||
 		((!is_export && (i != EVP_CIPHER_key_length(c)))
 		|| (is_export && ((i != ek) || (s->s2->tmp.clear+i !=
 			EVP_CIPHER_key_length(c))))))
 		{
+		ERR_clear_error();
 		if (is_export)
 			i=ek;
 		else

ssl/s3_enc.c

@@ -356,7 +356,7 @@ int ssl3_enc(SSL *s, int send)
 	if ((s->session == NULL) || (ds == NULL) ||
 		(enc == NULL))
 		{
-		memcpy(rec->data,rec->input,rec->length);
+		memmove(rec->data,rec->input,rec->length);
 		rec->input=rec->data;
 		}
 	else
@@ -366,7 +366,6 @@ int ssl3_enc(SSL *s, int send)
 
 		/* COMPRESS */
 
-		/* This should be using (bs-1) and bs instead of 7 and 8 */
 		if ((bs != 1) && send)
 			{
 			i=bs-((int)l%bs);
@@ -376,12 +375,24 @@ int ssl3_enc(SSL *s, int send)
 			rec->length+=i;
 			rec->input[l-1]=(i-1);
 			}
-
+		
+		if (!send)
+			{
+			if (l == 0 || l%bs != 0)
+				{
+				SSLerr(SSL_F_SSL3_ENC,SSL_R_BLOCK_CIPHER_PAD_IS_WRONG);
+				ssl3_send_alert(s,SSL3_AL_FATAL,SSL_AD_DECRYPT_ERROR);
+				return(0);
+				}
+			}
+		
 		EVP_Cipher(ds,rec->data,rec->input,l);
 
 		if ((bs != 1) && !send)
 			{
 			i=rec->data[l-1]+1;
+			/* SSL 3.0 bounds the number of padding bytes by the block size;
+			 * padding bytes (except that last) are arbitrary */
 			if (i > bs)
 				{
 				SSLerr(SSL_F_SSL3_ENC,SSL_R_BLOCK_CIPHER_PAD_IS_WRONG);
@@ -504,7 +515,10 @@ int ssl3_mac(SSL *ssl, unsigned char *md, int send)
 	EVP_DigestFinal( &md_ctx,md,&md_size);
 
 	for (i=7; i>=0; i--)
-		if (++seq[i]) break; 
+		{
+		++seq[i];
+		if (seq[i] != 0) break; 
+		}
 
 	return(md_size);
 	}

ssl/s3_srvr.c

@@ -1322,14 +1322,15 @@ static int ssl3_get_client_key_exchange(SSL *s)
 
 		i=RSA_private_decrypt((int)n,p,p,rsa,RSA_PKCS1_PADDING);
 
+		al = -1;
+		
 		if (i != SSL_MAX_MASTER_KEY_LENGTH)
 			{
 			al=SSL_AD_DECODE_ERROR;
 			SSLerr(SSL_F_SSL3_GET_CLIENT_KEY_EXCHANGE,SSL_R_BAD_RSA_DECRYPT);
-			goto f_err;
 			}
 
-		if (!((p[0] == (s->client_version>>8)) && (p[1] == (s->client_version & 0xff))))
+		if ((al == -1) && !((p[0] == (s->client_version>>8)) && (p[1] == (s->client_version & 0xff))))
 			{
 			/* The premaster secret must contain the same version number as the
 			 * ClientHello to detect version rollback attacks (strangely, the
@@ -1347,6 +1348,27 @@ static int ssl3_get_client_key_exchange(SSL *s)
 				}
 			}
 
+		if (al != -1)
+			{
+#if 0
+			goto f_err;
+#else
+			/* Some decryption failure -- use random value instead as countermeasure
+			 * against Bleichenbacher's attack on PKCS #1 v1.5 RSA padding
+			 * (see RFC 2246, section 7.4.7.1).
+			 * But note that due to length and protocol version checking, the
+			 * attack is impractical anyway (see section 5 in D. Bleichenbacher:
+			 * "Chosen Ciphertext Attacks Against Protocols Based on the RSA
+			 * Encryption Standard PKCS #1", CRYPTO '98, LNCS 1462, pp. 1-12).
+			 */
+			ERR_clear_error();
+			i = SSL_MAX_MASTER_KEY_LENGTH;
+			p[0] = s->client_version >> 8;
+			p[1] = s->client_version & 0xff;
+			RAND_pseudo_bytes(p+2, i-2); /* should be RAND_bytes, but we cannot work around a failure */
+#endif
+			}
+	
 		s->session->master_key_length=
 			s->method->ssl3_enc->generate_master_secret(s,
 				s->session->master_key,

ssl/t1_enc.c

@@ -420,7 +420,7 @@ int tls1_enc(SSL *s, int send)
 	if ((s->session == NULL) || (ds == NULL) ||
 		(enc == NULL))
 		{
-		memcpy(rec->data,rec->input,rec->length);
+		memmove(rec->data,rec->input,rec->length);
 		rec->input=rec->data;
 		}
 	else
@@ -447,11 +447,21 @@ int tls1_enc(SSL *s, int send)
 			rec->length+=i;
 			}
 
+		if (!send)
+			{
+			if (l == 0 || l%bs != 0)
+				{
+				SSLerr(SSL_F_TLS1_ENC,SSL_R_BLOCK_CIPHER_PAD_IS_WRONG);
+				ssl3_send_alert(s,SSL3_AL_FATAL,SSL_AD_DECRYPT_ERROR);
+				return(0);
+				}
+			}
+		
 		EVP_Cipher(ds,rec->data,rec->input,l);
 
 		if ((bs != 1) && !send)
 			{
-			ii=i=rec->data[l-1];
+			ii=i=rec->data[l-1]; /* padding_length */
 			i++;
 			if (s->options&SSL_OP_TLS_BLOCK_PADDING_BUG)
 				{
@@ -462,6 +472,8 @@ int tls1_enc(SSL *s, int send)
 				if (s->s3->flags & TLS1_FLAGS_TLS_PADDING_BUG)
 					i--;
 				}
+			/* TLS 1.0 does not bound the number of padding bytes by the block size.
+			 * All of them must have value 'padding_length'. */
 			if (i > (int)rec->length)
 				{
 				SSLerr(SSL_F_TLS1_ENC,SSL_R_BLOCK_CIPHER_PAD_IS_WRONG);
@@ -572,7 +584,10 @@ printf("rec=");
 #endif
 
 	for (i=7; i>=0; i--)
-		if (++seq[i]) break; 
+		{
+		++seq[i];
+		if (seq[i] != 0) break; 
+		}
 
 #ifdef TLS_DEBUG
 {unsigned int z; for (z=0; z<md_size; z++) printf("%02X ",md[z]); printf("\n"); }

test/Makefile.ssl

@@ -191,7 +191,7 @@ test_bn:
 	@./$(BNTEST) >tmp.bntest
 	@echo quit >>tmp.bntest
 	@echo "running bc"
-	@<tmp.bntest sh -c "`sh ./bctest`" | $(PERL) -e '$$i=0; while (<STDIN>) {if (/^test (.*)/) {print STDERR "\nverify $$1";} elsif (!/^0$$/) {die "\nFailed! bc: $$_";} else {print STDERR "."; $$i++;}} print STDERR "\n$$i tests passed\n"'
+	@<tmp.bntest sh -c "`sh ./bctest ignore`" | $(PERL) -e '$$i=0; while (<STDIN>) {if (/^test (.*)/) {print STDERR "\nverify $$1";} elsif (!/^0$$/) {die "\nFailed! bc: $$_";} else {print STDERR "."; $$i++;}} print STDERR "\n$$i tests passed\n"'
 	@echo 'test a^b%c implementations'
 	./$(EXPTEST)
 

test/bctest

@@ -11,9 +11,28 @@
 # running) bc.
 
 
-# Test for SunOS 5.[78] bc bug
-SunOStest() {
-${1} >tmp.bctest <<\EOF
+IFS=:
+try_without_dir=true
+# First we try "bc", then "$dir/bc" for each item in $PATH.
+for dir in dummy:$PATH; do
+    if [ "$try_without_dir" = true ]; then
+      # first iteration
+      bc=bc
+      try_without_dir=false
+    else
+      # second and later iterations
+      bc="$dir/bc"
+      if [ ! -f "$bc" ]; then  # '-x' is not available on Ultrix
+        bc=''
+      fi
+    fi
+
+    if [ ! "$bc" = '' ]; then
+        failure=none
+
+
+        # Test for SunOS 5.[78] bc bug
+        "$bc" >tmp.bctest <<\EOF
 obase=16
 ibase=16
 a=AD88C418F31B3FC712D0425001D522B3AE9134FF3A98C13C1FCC1682211195406C1A6C66C6A\
@@ -28,17 +47,14 @@ b=DCE91E7D120B983EA9A104B5A96D634DD644C37657B1C7860B45E6838999B3DCE5A555583C6\
 3ED0E2017D60A68775B75481449
 (a/b)*b + (a%b) - a
 EOF
-if [ 0 != "`cat tmp.bctest`" ]
-then
-  # failure
-  return 1
-fi
-}
+        if [ 0 != "`cat tmp.bctest`" ]; then
+            failure=SunOStest
+        fi
 
 
-# Test for SCO bc bug.
-SCOtest() {
-${1} >tmp.bctest <<\EOF
+        if [ "$failure" = none ]; then
+            # Test for SCO bc bug.
+            "$bc" >tmp.bctest <<\EOF
 obase=16
 ibase=16
 -FFDD63BA1A4648F0D804F8A1C66C53F0D2110590E8A3907EC73B4AEC6F15AC177F176F2274D2\
@@ -65,21 +81,14 @@ F617E3145BBFBE9AFD0D6E437EA4FF6F04BC67C4F1458B4F0F47B64 - 1C2BBBB19B74E86FD32\
 D97935A7E1A14AD209D6CF811F55C6DB83AA9E6DFECFCD6669DED7171EE22A40C6181615CAF3F\
 5296964
 EOF
-if [ "0
-0" != "`cat tmp.bctest`" ]
-then
-  # failure
-  return 1
-fi
-}
+            if [ "0
+0" != "`cat tmp.bctest`" ]; then
+                failure=SCOtest
+            fi
+        fi
 
 
-IFS=:
-for dir in $PATH; do
-    bc="$dir/bc"
-
-    if [ -x "$bc" -a ! -d "$bc" ]; then
-        if SunOStest "$bc" && SCOtest "$bc"; then
+        if [ "$failure" = none ]; then
             # bc works; now check if it knows the 'print' command.
             if [ "OK" = "`echo 'print \"OK\"' | $bc 2>/dev/null`" ]
             then
@@ -90,10 +99,13 @@ for dir in $PATH; do
             exit 0
         fi
 
-        echo "$bc does not work properly.  Looking for another bc ..." >&2
+        echo "$bc does not work properly ('$failure' failed).  Looking for another bc ..." >&2
     fi
 done
 
 echo "No working bc found.  Consider installing GNU bc." >&2
-echo "cat >/dev/null"
+if [ "$1" = ignore ]; then
+  echo "cat >/dev/null"
+  exit 0
+fi
 exit 1

tools/c_rehash.in

@@ -117,7 +117,12 @@ sub link_hash_cert {
 		}
 		$hash .= ".$suffix";
 		print "$fname => $hash\n";
-		symlink $fname, $hash;
+		$symlink_exists=eval {symlink("",""); 1};
+		if ($symlink_exists) {
+			symlink $fname, $hash;
+		} else {
+			system ("cp", $fname, $hash);
+		}
 		$hashlist{$hash} = $fprint;
 }
 
@@ -142,7 +147,12 @@ sub link_hash_crl {
 		}
 		$hash .= ".r$suffix";
 		print "$fname => $hash\n";
-		symlink $fname, $hash;
+		$symlink_exists=eval {symlink("",""); 1};
+		if ($symlink_exists) {
+			symlink $fname, $hash;
+		} else {
+			system ("cp", $fname, $hash);
+		}
 		$hashlist{$hash} = $fprint;
 }
 

util/libeay.num

@@ -197,7 +197,7 @@ DH_generate_parameters                  204	EXIST::FUNCTION:DH
 DH_new                                  205	EXIST::FUNCTION:DH
 DH_size                                 206	EXIST::FUNCTION:DH
 DHparams_print                          207	EXIST::FUNCTION:DH
-DHparams_print_fp                       208	EXIST::FUNCTION:FP_API,DH
+DHparams_print_fp                       208	EXIST::FUNCTION:DH,FP_API
 DSA_free                                209	EXIST::FUNCTION:DSA
 DSA_generate_key                        210	EXIST::FUNCTION:DSA
 DSA_generate_parameters                 211	EXIST::FUNCTION:DSA
@@ -301,8 +301,8 @@ EVP_des_ede_cfb                         308	EXIST::FUNCTION:DES
 EVP_des_ede_ofb                         309	EXIST::FUNCTION:DES
 EVP_des_ofb                             310	EXIST::FUNCTION:DES
 EVP_desx_cbc                            311	EXIST::FUNCTION:DES
-EVP_dss                                 312	EXIST::FUNCTION:SHA,DSA
-EVP_dss1                                313	EXIST::FUNCTION:SHA,DSA
+EVP_dss                                 312	EXIST::FUNCTION:DSA,SHA
+EVP_dss1                                313	EXIST::FUNCTION:DSA,SHA
 EVP_enc_null                            314	EXIST::FUNCTION:
 EVP_get_cipherbyname                    315	EXIST::FUNCTION:
 EVP_get_digestbyname                    316	EXIST::FUNCTION:
@@ -478,7 +478,7 @@ RSA_generate_key                        485	EXIST::FUNCTION:RSA
 RSA_new                                 486	EXIST::FUNCTION:RSA
 RSA_new_method                          487	EXIST::FUNCTION:RSA
 RSA_print                               488	EXIST::FUNCTION:RSA
-RSA_print_fp                            489	EXIST::FUNCTION:FP_API,RSA
+RSA_print_fp                            489	EXIST::FUNCTION:RSA,FP_API
 RSA_private_decrypt                     490	EXIST::FUNCTION:RSA
 RSA_private_encrypt                     491	EXIST::FUNCTION:RSA
 RSA_public_decrypt                      492	EXIST::FUNCTION:RSA
@@ -742,7 +742,7 @@ d2i_PrivateKey                          748	EXIST::FUNCTION:
 d2i_PublicKey                           749	EXIST::FUNCTION:
 d2i_RSAPrivateKey                       750	EXIST::FUNCTION:RSA
 d2i_RSAPrivateKey_bio                   751	EXIST::FUNCTION:RSA
-d2i_RSAPrivateKey_fp                    752	EXIST::FUNCTION:FP_API,RSA
+d2i_RSAPrivateKey_fp                    752	EXIST::FUNCTION:RSA,FP_API
 d2i_RSAPublicKey                        753	EXIST::FUNCTION:RSA
 d2i_X509                                754	EXIST::FUNCTION:
 d2i_X509_ALGOR                          755	EXIST::FUNCTION:
@@ -844,7 +844,7 @@ i2d_PrivateKey                          851	EXIST::FUNCTION:
 i2d_PublicKey                           852	EXIST::FUNCTION:
 i2d_RSAPrivateKey                       853	EXIST::FUNCTION:RSA
 i2d_RSAPrivateKey_bio                   854	EXIST::FUNCTION:RSA
-i2d_RSAPrivateKey_fp                    855	EXIST::FUNCTION:FP_API,RSA
+i2d_RSAPrivateKey_fp                    855	EXIST::FUNCTION:RSA,FP_API
 i2d_RSAPublicKey                        856	EXIST::FUNCTION:RSA
 i2d_X509                                857	EXIST::FUNCTION:
 i2d_X509_ALGOR                          858	EXIST::FUNCTION:
@@ -933,8 +933,8 @@ d2i_RSAPublicKey_bio                    945	EXIST::FUNCTION:RSA
 i2d_RSAPublicKey_bio                    946	EXIST::FUNCTION:RSA
 PEM_read_RSAPublicKey                   947	EXIST:!WIN16:FUNCTION:RSA
 PEM_write_RSAPublicKey                  949	EXIST:!WIN16:FUNCTION:RSA
-d2i_RSAPublicKey_fp                     952	EXIST::FUNCTION:FP_API,RSA
-i2d_RSAPublicKey_fp                     954	EXIST::FUNCTION:FP_API,RSA
+d2i_RSAPublicKey_fp                     952	EXIST::FUNCTION:RSA,FP_API
+i2d_RSAPublicKey_fp                     954	EXIST::FUNCTION:RSA,FP_API
 BIO_copy_next_retry                     955	EXIST::FUNCTION:
 RSA_flags                               956	EXIST::FUNCTION:RSA
 X509_STORE_add_crl                      957	EXIST::FUNCTION:
@@ -1212,7 +1212,7 @@ name_cmp                                1239	EXIST::FUNCTION:
 str_dup                                 1240	NOEXIST::FUNCTION:
 i2s_ASN1_ENUMERATED                     1241	EXIST::FUNCTION:
 i2s_ASN1_ENUMERATED_TABLE               1242	EXIST::FUNCTION:
-BIO_s_log                               1243	EXIST:!WIN16,!WIN32,!macintosh:FUNCTION:
+BIO_s_log                               1243	EXIST:!WIN32,!WIN16,!macintosh:FUNCTION:
 BIO_f_reliable                          1244	EXIST::FUNCTION:
 PKCS7_dataFinal                         1245	EXIST::FUNCTION:
 PKCS7_dataDecode                        1246	EXIST::FUNCTION:
@@ -1535,7 +1535,7 @@ ASN1_STRING_set_default_mask_asc        1960	EXIST:!VMS:FUNCTION:
 ASN1_STRING_set_def_mask_asc            1960	EXIST:VMS:FUNCTION:
 PEM_write_bio_RSA_PUBKEY                1961	EXIST::FUNCTION:RSA
 ASN1_INTEGER_cmp                        1963	EXIST::FUNCTION:
-d2i_RSA_PUBKEY_fp                       1964	EXIST::FUNCTION:FP_API,RSA
+d2i_RSA_PUBKEY_fp                       1964	EXIST::FUNCTION:RSA,FP_API
 X509_trust_set_bit_asc                  1967	NOEXIST::FUNCTION:
 PEM_write_bio_DSA_PUBKEY                1968	EXIST::FUNCTION:
 X509_STORE_CTX_free                     1969	EXIST::FUNCTION:
@@ -1638,7 +1638,7 @@ ASN1_BIT_STRING_set                     2109	EXIST::FUNCTION:
 X509_TRUST_get_count                    2110	EXIST::FUNCTION:
 ASN1_INTEGER_free                       2111	EXIST::FUNCTION:
 OTHERNAME_free                          2112	EXIST::FUNCTION:
-i2d_RSA_PUBKEY_fp                       2113	EXIST::FUNCTION:FP_API,RSA
+i2d_RSA_PUBKEY_fp                       2113	EXIST::FUNCTION:RSA,FP_API
 ASN1_INTEGER_dup                        2114	EXIST::FUNCTION:
 d2i_X509_CERT_AUX                       2115	EXIST::FUNCTION:
 PEM_write_bio_PUBKEY                    2117	EXIST::FUNCTION:

util/mklink.pl

@@ -48,8 +48,13 @@ foreach $dirname (@from_path) {
 my $to = join('/', @to_path);
 
 my $file;
+$symlink_exists=eval {symlink("",""); 1};
 foreach $file (@files) {
     my $err = "";
-    symlink("$to/$file", "$from/$file") or $err = " [$!]";
+    if ($symlink_exists) {
+	symlink("$to/$file", "$from/$file") or $err = " [$!]";
+    } else {
+	system ("cp", "$file", "$from/$file") and $err = " [$!]";
+    }
     print $file . " => $from/$file$err\n";
 }